Sample records for appliances conventional ovens

  1. APPLIANCE STANDARDS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of ScienceandMesa del(ANL-IN-03-032)8Li (59AJ76) (See theDoctoral20ALSNewstt^APPLIANCE STANDARDS How they

  2. Arnold Schwarzenegger 2010 APPLIANCE

    E-Print Network [OSTI]

    : Appliance Efficiency Regulations, appliance standards, refrigerators, air conditioners, space heaters, water heaters, pool heaters, pool pumps, electric spas, pool pump motors, plumbing fittings, plumbing fixtures, showerheads, spray valves, faucets, tub spout diverters, water closets, urinals, ceiling fans, ceiling fan

  3. Appliance Efficiency Regulations

    Broader source: Energy.gov [DOE]

    Note: The federal government has imposed and updated appliance efficiency standards through several legislative acts,* and now has standards in place or under development for 30 classes of...

  4. Oven wall panel construction

    DOE Patents [OSTI]

    Ellison, Kenneth (20 Avondale Cres., Markham, CA); Whike, Alan S. (R.R. #1, Caledon East, both of Ontario, CA)

    1980-04-22T23:59:59.000Z

    An oven roof or wall is formed from modular panels, each of which comprises an inner fabric and an outer fabric. Each such fabric is formed with an angle iron framework and somewhat resilient tie-bars or welded at their ends to flanges of the angle irons to maintain the inner and outer frameworks in spaced disposition while minimizing heat transfer by conduction and permitting some degree of relative movement on expansion and contraction of the module components. Suitable thermal insulation is provided within the module. Panels or skins are secured to the fabric frameworks and each such skin is secured to a framework and projects laterally so as slidingly to overlie the adjacent frame member of an adjacent panel in turn to permit relative movement during expansion and contraction.

  5. Ovenized microelectromechanical system (MEMS) resonator

    DOE Patents [OSTI]

    Olsson, Roy H; Wojciechowski, Kenneth; Kim, Bongsang

    2014-03-11T23:59:59.000Z

    An ovenized micro-electro-mechanical system (MEMS) resonator including: a substantially thermally isolated mechanical resonator cavity; a mechanical oscillator coupled to the mechanical resonator cavity; and a heating element formed on the mechanical resonator cavity.

  6. Convection automated logic oven control

    SciTech Connect (OSTI)

    Boyer, M.A.; Eke, K.I. [Apollo U.S.A. Inc., Orlando, FL (United States)] [Apollo U.S.A. Inc., Orlando, FL (United States)

    1998-03-01T23:59:59.000Z

    For the past few years, there has been a greater push to bring more automation to the cooling process. There have been attempts at automated cooking using a wide range of sensors and procedures, but with limited success. The authors have the answer to the automated cooking process; this patented technology is called Convection AutoLogic (CAL). The beauty of the technology is that it requires no extra hardware for the existing oven system. They use the existing temperature probe, whether it is an RTD, thermocouple, or thermistor. This means that the manufacturer does not have to be burdened with extra costs associated with automated cooking in comparison to standard ovens. The only change to the oven is the program in the central processing unit (CPU) on the board. As for its operation, when the user places the food into the oven, he or she is required to select a category (e.g., beef, poultry, or casseroles) and then simply press the start button. The CAL program then begins its cooking program. It first looks at the ambient oven temperature to see if it is a cold, warm, or hot start. CAL stores this data and then begins to look at the food`s thermal footprint. After CAL has properly detected this thermal footprint, it can calculate the time and temperature at which the food needs to be cooked. CAL then sets up these factors for the cooking stage of the program and, when the food has finished cooking, the oven is turned off automatically. The total time for this entire process is the same as the standard cooking time the user would normally set. The CAL program can also compensate for varying line voltages and detect when the oven door is opened. With all of these varying factors being monitored, CAL can produce a perfectly cooked item with minimal user input.

  7. A container for heat treating materials in microwave ovens

    DOE Patents [OSTI]

    Holcombe, C.E.; Dykes, N.L.; Kimrey, H.D. Jr.; Mills, J.E.

    1988-01-26T23:59:59.000Z

    The efficiency of a microwave oven of a conventional two-source configuration and energy level is increased by providing the oven with a container for housing a refractory material to be treated. The container is formed to top and bottom walls transparent to microwaves while the sidewalls, in a circular configuration, are formed of a nonmetallic material opaque to microwave radiation for reflecting the radiation penetrating the top and bottom walls radially inwardly into the center of the container wherein a casket of heat-insulating material is provided for housing the material to be heat treated. The reflection of the microwave radiation from the sidewalls increases the concentration of the microwaves upon the material being heat treated while the concentration of the microwaves upon the material being heat treated while the casket retains the heat to permit the heating of the material to a substantially higher temperature than achievable in the oven without the container.

  8. Solar Oven, Take One: FAIL | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Solar Oven, Take One: FAIL Solar Oven, Take One: FAIL June 15, 2011 - 11:56am Addthis Our homemade solar oven. | Courtesy of Moon Choe Our homemade solar oven. | Courtesy of Moon...

  9. An intelligent appliance control

    SciTech Connect (OSTI)

    Maher, C.A. Jr. [Tridelta Industries, Inc., Mentor, OH (United States)] [Tridelta Industries, Inc., Mentor, OH (United States); McMahon, G. [Pitco Frialator, Inc., Concord, NH (United States)] [Pitco Frialator, Inc., Concord, NH (United States)

    1998-05-01T23:59:59.000Z

    This paper describes the use of a microcontroller to implement an adaptive form of an ON/OFF-type control system. The principal benefits that this technique offers are the ability to self adjust automatically to the dynamics of the appliance being controlled and to minimize the cyclic wear and tear on the final heat-control elements. This technique is best applied to those systems with at least one large energy storage element (e.g., thermal mass), not needing fine control of the controlled variable, and ones using ON/OFF (relay type) rather than continuous final control outputs. This profile encompasses a large number of potential applications, particularly in the appliance field.

  10. Energy Efficiency Standards for Appliances

    Broader source: Energy.gov [DOE]

    '' Note: The federal government has imposed and updated appliance efficiency standards through several legislative acts,* and now has standards in place or under development for 30 classes of...

  11. Appliance and Equipment Efficiency Standards

    Broader source: Energy.gov [DOE]

    '' Note: The federal government has imposed and updated appliance efficiency standards through several legislative acts,* and now has standards in place or under development for 30 classes of...

  12. Streamlining ENERGY STAR Appliance Testing

    Broader source: Energy.gov [DOE]

    To save taxpayer dollars and help lower the costs of innovative energy-efficient technologies, the Energy Department is streamlining ENERGY STAR testing for appliances.

  13. Appliance and Equipment Standards

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny: The Future of1Albuquerque,APPENDIX A: Technical Support DocumentAppliance and

  14. Appliances, Lighting, Electronics, and Miscellaneous Equipment Electricity Use in New Homes

    E-Print Network [OSTI]

    Brown, Richard E.; Rittelman, William; Parker, Danny; Homan, Gregory

    2007-01-01T23:59:59.000Z

    62440 Appliances, Lighting, Electronics, and Miscellaneousof California. Appliances, Lighting, Electronics, anduses (appliances, lighting, electronics, and miscellaneous

  15. Ovens

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's Possible for RenewableSpeedingBiomass and Biofuels BiomassOutstanding-Long-Term-Liabilities

  16. Remote repair appliance

    DOE Patents [OSTI]

    Heumann, F.K.; Wilkinson, J.C.; Wooding, D.R.

    1997-12-16T23:59:59.000Z

    A remote appliance for supporting a tool for performing work at a work site on a substantially circular bore of a work piece and for providing video signals of the work site to a remote monitor comprises: a base plate having an inner face and an outer face; a plurality of rollers, wherein each roller is rotatably and adjustably attached to the inner face of the base plate and positioned to roll against the bore of the work piece when the base plate is positioned against the mouth of the bore such that the appliance may be rotated about the bore in a plane substantially parallel to the base plate; a tool holding means for supporting the tool, the tool holding means being adjustably attached to the outer face of the base plate such that the working end of the tool is positioned on the inner face side of the base plate; a camera for providing video signals of the work site to the remote monitor; and a camera holding means for supporting the camera on the inner face side of the base plate, the camera holding means being adjustably attached to the outer face of the base plate. In a preferred embodiment, roller guards are provided to protect the rollers from debris and a bore guard is provided to protect the bore from wear by the rollers and damage from debris. 5 figs.

  17. Remote repair appliance

    DOE Patents [OSTI]

    Heumann, Frederick K. (Ballston Spa, NY); Wilkinson, Jay C. (Ballston Spa, NY); Wooding, David R. (Saratoga Springs, NY)

    1997-01-01T23:59:59.000Z

    A remote appliance for supporting a tool for performing work at a worksite on a substantially circular bore of a workpiece and for providing video signals of the worksite to a remote monitor comprising: a baseplate having an inner face and an outer face; a plurality of rollers, wherein each roller is rotatably and adjustably attached to the inner face of the baseplate and positioned to roll against the bore of the workpiece when the baseplate is positioned against the mouth of the bore such that the appliance may be rotated about the bore in a plane substantially parallel to the baseplate; a tool holding means for supporting the tool, the tool holding means being adjustably attached to the outer face of the baseplate such that the working end of the tool is positioned on the inner face side of the baseplate; a camera for providing video signals of the worksite to the remote monitor; and a camera holding means for supporting the camera on the inner face side of the baseplate, the camera holding means being adjustably attached to the outer face of the baseplate. In a preferred embodiment, roller guards are provided to protect the rollers from debris and a bore guard is provided to protect the bore from wear by the rollers and damage from debris.

  18. Energy Star Appliances 1 Texas A&M AgriLife Extension Service ENERGY STAR Appliances

    E-Print Network [OSTI]

    Energy Star® Appliances 1 Texas A&M AgriLife Extension Service ENERGY STAR® Appliances ENERGY STAR®-labeled appliances save you money by using less electricity and water than other appliances. Better appliance energy efficiency comes from quality materials and technologically advanced materials. Although energy efficient

  19. Incorporating Experience Curves in Appliance Standards Analysis

    E-Print Network [OSTI]

    Desroches, Louis-Benoit

    2012-01-01T23:59:59.000Z

    appliance price projections than the assumption-basedrepresentative projection of future prices than the constant

  20. Issues in federal preemption of state appliance energy efficiency regulations

    SciTech Connect (OSTI)

    Fang, J.M.; Balistocky, S.; Schaefler, A.M.

    1982-12-01T23:59:59.000Z

    The findings and conclusions of the analysis of the various issues involved in the federal preemption of state regulations for the DOE no standard rule on covered appliances are summarized. The covered products are: refrigerators, refrigerator-freezers, freezers, clothes dryers, kitchen ranges and ovens, water heaters (excluding heat pump water heaters), room air conditioners, central air conditioners (excluding heat pumps), and furnaces. A detailed discussion of the rationale for the positions of groups offering comment for the record is presneted. The pertinent categories of state and local regulations and programs are explained, then detailed analysis is conducted on the covered products and regulations. Issues relating to the timing of preemption of state regulations are discussed, as well as issues relating to burden of proof, contents of petitions for exemptions from preemption, criteria for evaluating petitions, and procedural and other issues. (LEW)

  1. Rapid baking characteristics and energy efficiency of an impingement air oven compared to a reel oven

    E-Print Network [OSTI]

    Smith, Lloyd Hobart

    1983-01-01T23:59:59.000Z

    those baked in the reel oven. Buna baked in t h e im pi ngement ove n wer e a pp rex imately 10X smaller in volume. Instron shear force measurements o f the change i n f i rmnes s t h a t r el a te to sta ling showed that the impingement baked buna... isture leve 1 s with in the oven. Modern reel ovens can be heated quickly, have easily adjustable temperature control and have high heat ing e ff ic iency. In 1 975, Smi t h was granted a patent for the "Jet Sweep" air impingement oven in which jets...

  2. Method for processing coke oven gas

    SciTech Connect (OSTI)

    Flockenhaus, C.; Meckel, J.F.; Wagener, D.

    1980-11-25T23:59:59.000Z

    Coke oven gas is subjected, immediately after the discharge thereof from coke ovens, and without any preliminary cooling operation or any purification operation other than desulfurization, to a catalytic cracking operation to form a hot cracked gas which is rich in hydrogen and carbon monoxide. The catalytic cracking reaction is carried out in the presence of a hydrogen-containing and/or CO2-containing gas, with a steam reforming catalyst.

  3. Waste water heat recovery appliance. Final report

    SciTech Connect (OSTI)

    Chapin, H.D.; Armstrong, P.R.; Chapin, F.A.W.

    1983-11-21T23:59:59.000Z

    An efficient convective waste heat recovery heat exchanger was designed and tested. The prototype appliance was designed for use in laundromats and other small commercial operations which use large amounts of hot water. Information on general characteristics of the coin-op laundry business, energy use in laundromats, energy saving resources already in use, and the potential market for energy saving devices in laundromats was collected through a literature search and interviews with local laundromat operators in Fort Collins, Colorado. A brief survey of time-use patterns in two local laundromats was conducted. The results were used, with additional information from interviews with owners, as the basis for the statistical model developed. Mathematical models for the advanced and conventional types were developed and the resulting computer program listed. Computer simulations were made using a variety of parameters; for example, different load profiles, hold-up volumes, wall resistances, and wall areas. The computer simulation results are discussed with regard to the overall conclusions. Various materials were explored for use in fabricating the appliance. Resistance to corrosion, workability, and overall suitability for laundromat installations were considered for each material.

  4. GE Appliances: Order (2010-CE-2113)

    Broader source: Energy.gov [DOE]

    DOE issued an Order after entering into a Compromise Agreement with General Electric Appliances after finding GE Appliances had failed to certify that certain models of dehumidifiers comply with the applicable energy conservation standards.

  5. Catalog of DC Appliances and Power Systems

    E-Print Network [OSTI]

    Garbesi, Karina

    2012-01-01T23:59:59.000Z

    DC Conversion Loss Savings of Appliances Running on DirectConversion Loss Savings of Appliances Running on Direct DCrunning on AC and, in column B, the avoided AC-DC conversions losses

  6. Appliance Standards and Rulemaking Federal Advisory Committee...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Issuance Appliance Standards and Rulemaking Federal Advisory Committee (ASRAC) - Central Air Conditioner Regional Standards Enforcement Working Group; Notice of Open...

  7. Appliance Standards and Rulemaking Federal Advisory Committee...

    Energy Savers [EERE]

    of the National Energy Laboratories Buildings Home About Emerging Technologies Residential Buildings Commercial Buildings Appliance & Equipment Standards Building Energy Codes...

  8. Modeling of GE Appliances: Final Presentation

    SciTech Connect (OSTI)

    Fuller, Jason C.; Vyakaranam, Bharat; Leistritz, Sean M.; Parker, Graham B.

    2013-01-31T23:59:59.000Z

    This report is the final in a series of three reports funded by U.S. Department of Energy Office of Electricity Delivery and Energy Reliability (DOE-OE) in collaboration with GE Appliances through a Cooperative Research and Development Agreement (CRADA) to describe the potential of GE Appliances DR-enabled appliances to provide benefits to the utility grid.

  9. Appliances, Lighting, Electronics, and Miscellaneous Equipment Electricity Use in New Homes

    E-Print Network [OSTI]

    Brown, Richard E.; Rittelman, William; Parker, Danny; Homan, Gregory

    2007-01-01T23:59:59.000Z

    62440 Appliances, Lighting, Electronics, and MiscellaneousAppliances, Lighting, Electronics, and Miscellaneoususes (appliances, lighting, electronics, and miscellaneous

  10. Coke oven gas injection to blast furnaces

    SciTech Connect (OSTI)

    Maddalena, F.L.; Terza, R.R.; Sobek, T.F.; Myklebust, K.L. [U.S. Steel, Clairton, PA (United States)

    1995-12-01T23:59:59.000Z

    U.S. Steel has three major facilities remaining in Pennsylvania`s Mon Valley near Pittsburgh. The Clairton Coke Works operates 12 batteries which produce 4.7 million tons of coke annually. The Edgar Thomson Works in Braddock is a 2.7 million ton per year steel plant. Irvin Works in Dravosburg has a hot strip mill and a range of finishing facilities. The coke works produces 120 mmscfd of coke oven gas in excess of the battery heating requirements. This surplus gas is used primarily in steel re-heating furnaces and for boiler fuel to produce steam for plant use. In conjunction with blast furnace gas, it is also used for power generation of up to 90 MW. However, matching the consumption with the production of gas has proved to be difficult. Consequently, surplus gas has been flared at rates of up to 50 mmscfd, totaling 400 mmscf in several months. By 1993, several changes in key conditions provided the impetus to install equipment to inject coke oven gas into the blast furnaces. This paper describes the planning and implementation of a project to replace natural gas in the furnaces with coke oven gas. It involved replacement of 7 miles of pipeline between the coking plants and the blast furnaces, equipment capable of compressing coke oven gas from 10 to 50 psig, and installation of electrical and control systems to deliver gas as demanded.

  11. Distinctive Appliances: Proposed Penalty (2014-CE-23020)

    Broader source: Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Distinctive Appliances Distributing Inc. failed to certify cooking products as compliant with the applicable energy conservation standards.

  12. Smart Domestic Appliances Provide Flexibility for Sustainable...

    Open Energy Info (EERE)

    benefits and difficulties associated with smart grid appliances. The presenter discusses demand response and load management and how users of smart grid can benefit renewable...

  13. Appliance and Equipment Energy Efficiency Standards

    Broader source: Energy.gov [DOE]

    '' Note: The federal government has imposed and updated appliance efficiency standards through several legislative acts,* and now has standards in place or under development for 30 classes of...

  14. Earthjustice, Appliance Standards Awareness Project, Natural...

    Energy Savers [EERE]

    Council - Comments in response to DOE solicitation of views on the implementation of test procedure waivers for large capacity clothes washers Earthjustice, Appliance Standards...

  15. GE Appliances: Proposed Penalty (2010-CE-2113)

    Broader source: Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that General Electric Appliances failed to certify a variety of dehumidifiers as compliant with the applicable energy conservation standards.

  16. Appliance remanufacturing and life cycle energy and economic savings

    E-Print Network [OSTI]

    Boustani, Avid

    In this paper we evaluate the energy and economic consequences of appliance remanufacturing relative to purchasing new. The appliances presented in this report constitute major residential appliances: refrigerator, dishwasher, ...

  17. New process to avoid emissions: Constant pressure in coke ovens

    SciTech Connect (OSTI)

    Giertz, J.; Huhn, F. [DMT-Gesellschaft fuer Forschung und Pruefung mbH, Essen (Germany). Inst. for Cokemaking and Fuel Technology; Hofherr, K. [Thyssen Stahl AG, Duisburg (Germany)

    1995-12-01T23:59:59.000Z

    A chamber pressure regulation (PROven), especially effective in regard to emission control problems of coke ovens is introduced for the first time. Because of the partial vacuum in the collecting main system, it is possible to keep the oven`s raw gas pressure constant on a low level over the full coking time. The individual pressure control for each chamber is assured directly as a function of the oven pressure by an immersion system controlling the flow resistance of the collecting main valve. The latter is a fixed-position design (system name ``FixCup``). By doing away with the interdependence of collecting main pressure and chamber pressure, a parameter seen as a coking constant could not be made variable. This opens a new way to reduce coke oven emissions and simultaneously to prevent the ovens from damage caused by air ingress into the oven.

  18. State Energy Efficient Appliance Rebate Program (SEEARP) American...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    State Energy Efficient Appliance Rebate Program (SEEARP) American Recovery and Reinvestment Act (ARRA) Funding Opportunity Number: DE-FOA-0000119 State Energy Efficient Appliance...

  19. Sales Tax Holiday for Energy-Efficient Appliances

    Broader source: Energy.gov [DOE]

    In November 2007, Maryland enacted legislation creating a sales and use tax "holiday" for certain energy-efficient appliances, beginning in 2011. Under the law, qualifying appliances purchased...

  20. Secretary Chu Announces More Stringent Appliance Standards for...

    Energy Savers [EERE]

    Secretary Chu Announces More Stringent Appliance Standards for Home Water Heaters and Other Heating Products Secretary Chu Announces More Stringent Appliance Standards for Home...

  1. Four-County EMC- Residential Energy Efficiency Appliance Rebate Program

    Broader source: Energy.gov [DOE]

    Four-County EMC offers its customers $50 rebates for purchasing certain Energy Star appliances. Eligible appliances include refrigerators, dishwashers, clothes washers and freezers. The rebates are...

  2. MC Appliance: Order (2012-CE-1508)

    Broader source: Energy.gov [DOE]

    DOE ordered CNA International Inc. d/b/a MC Appliance Corporation to pay a $8,000 civil penalty after finding MC Appliance had failed to certify that certain models of room air conditioners comply with the applicable energy conservation standards.

  3. APPLIANCE EFFICIENCY REGULATIONS FOR REFRIGERATORS AND FREEZERS

    E-Print Network [OSTI]

    CENTRAL AIR CONDITIONERS GAS SPACE HEATERS WATER HEATERS PLUMBING FITTINGS FLUORESCENT LAMP BALLASTS LUMINAIRES GAS COOKING APPLIANCES AND GAS POOL HEATERS SEPTEMBER 1992 #12;TABLE OF CONTENTS APPLIANCE) Gas space heaters, excluding the following types: (1) gravity type central furnaces; (2) heaters

  4. Multiple delivery cesium oven system for negative ion sources

    SciTech Connect (OSTI)

    Bansal, G.; Bhartiya, S.; Pandya, K.; Bandyopadhyay, M.; Singh, M. J.; Soni, J.; Gahlaut, A.; Parmar, K. G.; Chakraborty, A. [Institute for Plasma Research, Bhat, Gandhinagar, Gujarat 382428 (India)

    2012-02-15T23:59:59.000Z

    Distribution of cesium in large negative ion beam sources to be operational in ITER, is presently based on the use of three or more cesium ovens, which operate simultaneously and are controlled remotely. However, use of multiple Cs ovens simultaneously is likely to pose difficulties in operation and maintenance of the ovens. An alternate method of Cs delivery, based on a single oven distribution system is proposed as one which could reduce the need of simultaneous operation of many ovens. A proof of principle experiment verifying the concept of a multinozzle distributor based Cs oven has been carried out at Institute for Plasma Research. It is also observed that the Cs flux is not controlled by Cs reservoir temperature after few hours of operation but by the temperature of the distributor which starts behaving as a Cs reservoir.

  5. Prolongation technologies for campaign life of tall oven

    SciTech Connect (OSTI)

    Doko, Yoshiji; Saji, Takafumi; Kitayama, Yoshiteru; Yoshida, Shuhei [Sumitomo Metal Industries, Ltd., Kashima, Ibaraki (Japan). Kashima Steel Works

    1997-12-31T23:59:59.000Z

    In Kashima Steel Works, 25-year-old 7-meter-high coke ovens have damage on their walls. However, by using new methods of internal in-situ investigation, ceramic welding for the extended central and upper portions of coke ovens has prolonged the campaign life for over 40 years without large-scale hot repair. In this paper, introduction of these new methods, its application in Kashima and the policy of repairing the tall coke oven are reported.

  6. Retrospective Evaluation of Appliance Price Trends

    SciTech Connect (OSTI)

    Dale, Larry; Antinori, Camille; McNeil, Michael; McMahon, James E.; Fujita, K. Sydny

    2008-07-20T23:59:59.000Z

    Real prices of major appliances (refrigerators, dishwashers, heating and cooling equipment) have been falling since the late 1970s despite increases in appliance efficiency and other quality variables. This paper demonstrates that historic increases in efficiency over time, including those resulting from minimum efficiency standards, incur smaller price increases than were expected by Department of Energy (DOE) forecasts made in conjunction with standards. This effect can be explained by technological innovation, which lowers the cost of efficiency, and by market changes contributing to lower markups and economies of scale in production of higher efficiency units. We reach four principal conclusions about appliance trends and retail price setting: 1. For the past several decades, the retail price of appliances has been steadily falling while efficiency has been increasing. 2. Past retail price predictions made by DOE analyses of efficiency standards, assuming constant prices over time, have tended to overestimate retail prices. 3. The average incremental price to increase appliance efficiency has declined over time. DOE technical support documents have typically overestimated this incremental price and retail prices. 4. Changes in retail markups and economies of scale in production of more efficient appliances may have contributed to declines in prices of efficient appliances.

  7. West Virginia Consumers Have Appliance Rebate 'Trifecta'

    Broader source: Energy.gov [DOE]

    West Virginians didnt waste any time in taking advantage of the Energy Efficient Appliance Rebate Program. Only three months in, and almost half of the available $1.7 million is already spoken for.

  8. Catalog of DC Appliances and Power Systems

    E-Print Network [OSTI]

    Garbesi, Karina

    2012-01-01T23:59:59.000Z

    main conclusions about off-grid markets for DC appliances,and power systems. Mature Off-Grid Markets for DC Appliancesapplications include off-grid residential, telecom, remote

  9. 2009 CALIFORNIA RESIDENTIAL APPLIANCE SATURATION STUDY

    E-Print Network [OSTI]

    data, household energy consumption data and weather information to calculate average annual information on appliances, equipment, and general consumption patterns. Data collection was completed in early 2010. The study yielded energy consumption estimates for 27 electric and 10 natural gas

  10. Equator Appliance: ENERGY STAR Referral (EZ 3720)

    Broader source: Energy.gov [DOE]

    DOE referred Equator Appliance clothes washer EZ 3720 to EPA, brand manager of the ENERGY STAR program, for appropriate action after DOE testing revealed that the model does not meet ENERGY STAR requirements.

  11. Energy-Efficient Appliance Manufacturing Tax Credit

    Broader source: Energy.gov [DOE]

    '''''Note: This tax credit expired at the end of 2011. The American Taxpayer Relief Act of 2012 retroactively renewed this tax credit for certain appliances manufactured in 2012 and 2013. '''''

  12. MC Appliance: Proposed Penalty (2014-CE-20002)

    Broader source: Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that MC Appliance Corporation failed to certify residential clothes washers and residential clothes dryers as compliant with the applicable energy conservation standards.

  13. Pollutant Emission Factors from Residential Natural Gas Appliances: A Literature Review

    E-Print Network [OSTI]

    Traynor, G.W.

    2011-01-01T23:59:59.000Z

    distributions from residential natural gas appliances. CH 4ng/J) distribution from residential natural gas appliances.from Residential Natural Gas Appliances: A Literature Review

  14. Impact of Natural Gas Appliances on Pollutant Levels in California Homes

    E-Print Network [OSTI]

    Mullen, Nasim A.

    2014-01-01T23:59:59.000Z

    35): 5661-67. Impact of Natural Gas Appliances on PollutantO-. ! Natural Gas Appliances on PollutantA! =? >7! =::! Impact of Natural Gas Appliances on Pollutant

  15. State Appliance Standards (released in AEO2009)

    Reports and Publications (EIA)

    2009-01-01T23:59:59.000Z

    State appliance standards have existed for decades, starting with Californias enforcement of minimum efficiency requirements for refrigerators and several other products in 1979. In 1987, recognizing that different efficiency standards for the same products in different states could create problems for manufacturers, Congress enacted the National Appliance Energy Conservation Act (NAECA), which initially covered 12 products. The Energy Policy Act of 1992 (EPACT92), EPACT2005, and EISA2007 added additional residential and commercial products to the 12 products originally specified under NAECA.

  16. Non-intrusive appliance monitor apparatus

    DOE Patents [OSTI]

    Hart, George W. (Natick, MA); Kern, Jr., Edward C. (Lincoln, MA); Schweppe, Fred C. (Carlisle, MA)

    1989-08-15T23:59:59.000Z

    A non-intrusive monitor of energy consumption of residential appliances is described in which sensors, coupled to the power circuits entering a residence, supply analog voltage and current signals which are converted to digital format and processed to detect changes in certain residential load parameters, i.e., admittance. Cluster analysis techniques are employed to group change measurements into certain categories, and logic is applied to identify individual appliances and the energy consumed by each.

  17. Non-intrusive appliance monitor apparatus

    DOE Patents [OSTI]

    Hart, G.W.; Kern, E.C. Jr.; Schweppe, F.C.

    1989-08-15T23:59:59.000Z

    A non-intrusive monitor of energy consumption of residential appliances is described in which sensors, coupled to the power circuits entering a residence, supply analog voltage and current signals which are converted to digital format and processed to detect changes in certain residential load parameters, i.e., admittance. Cluster analysis techniques are employed to group change measurements into certain categories, and logic is applied to identify individual appliances and the energy consumed by each. 9 figs.

  18. Predicting Backdrafting and Spillage for Natural-Draft Gas Combustion Appliances: Validating VENT-II

    E-Print Network [OSTI]

    Rapp, Vi H.

    2014-01-01T23:59:59.000Z

    and Spillage for Natural-Draft Gas Combustion Appliances:and Spillage for Natural-Draft Gas Combustion Appliances: A

  19. Energy Efficient Appliance Sales Soar in North Carolina | Department...

    Broader source: Energy.gov (indexed) [DOE]

    Energy Efficient Appliance Sales Soar in North Carolina Energy Efficient Appliance Sales Soar in North Carolina July 23, 2010 - 11:00am Addthis Joshua DeLung What does this mean...

  20. Reading Municipal Light Department- Residential ENERGY STAR Appliance Rebate Program

    Broader source: Energy.gov [DOE]

    Reading Municipal Light Department (RMLD) offers rebates to residential customers who install Energy Star appliances in eligible homes. The offer is limited to one rebate per appliance or a maximum...

  1. 2012 APPLIANCE EFFICIENCY REGULATIONS Edmund G. Brown Jr., Governor

    E-Print Network [OSTI]

    : Appliance Efficiency Regulations, appliance standards, refrigerators, air conditioners, space heaters, water heaters, pool heaters, pool pumps, electric spas, pool pump motors, plumbing fittings, plumbing fixtures, showerheads, spray valves, faucets, tub spout diverters, water closets, urinals, ceiling fans, ceiling fan

  2. 2014-08-19 Issuance Appliance Standards and Rulemaking Federal...

    Energy Savers [EERE]

    Issuance Appliance Standards and Rulemaking Federal Advisory Committee (ASRAC) - Central Air Conditioner Regional Standards Enforcement Working Group; Notice of Open...

  3. Low-cost Appliance State Sensing for Energy Disaggregation

    E-Print Network [OSTI]

    Wu, Tianji

    2012-01-01T23:59:59.000Z

    and Steven B. Leeb. Non-intrusive electrical load monitor-in recent years, namely non-intrusive appliance load

  4. NATURAL GAS VARIABILITY IN CALIFORNIA: ENVIRONMENTAL IMPACTS AND DEVICE PERFORMANCE EXPERIMENTAL EVALUATION OF POLLUTANT EMISSIONS FROM RESIDENTIAL APPLIANCES

    SciTech Connect (OSTI)

    Singer, Brett C.; Apte, Michael G.; Black, Douglas R.; Hotchi, Toshifumi; Lucas, Donald; Lunden, Melissa M.; Mirer, Anna G.; Spears, Michael; Sullivan, Douglas P.

    2009-12-01T23:59:59.000Z

    The effect of liquefied natural gas on pollutant emissions was evaluated experimentally with used and new appliances in the laboratory and with appliances installed in residences, targeting information gaps from previous studies. Burner selection targeted available technologies that are projected to comprise the majority of installed appliances over the next decade. Experiments were conducted on 13 cooktop sets, 12 ovens, 5 broiler burners, 5 storage water heaters, 4 forced air furnaces, 1 wall furnace, and 6 tankless water heaters. Air-free concentrations and fuel-based emission factors were determined for carbon monoxide, nitrogen oxides, nitrogen dioxide, and the number of (predominantly ultrafine) particles over complete burns?including transient effects (device warm-up and intermittent firing of burners) following ignition--and during more stable end-of-burn conditions. Formaldehyde was measured over multi-burn cycles. The baseline fuel was Northern California line gas with Wobbe number (a measure of fuel energy delivery rate) of 1320-1340; test fuels had Wobbe numbers of roughly 1390 and 1420, and in some cases 1360. No ignition or operational problems were observed during test fuel use. Baseline emissions varied widely across and within burner groups and with burner operational mode. Statistically significant emissions changes were observed for some pollutants on some burners.

  5. Assessment of Literature Related to Combustion Appliance Venting

    E-Print Network [OSTI]

    1 Assessment of Literature Related to Combustion Appliance Venting Systems V.H. Rapp, B.C. Singer., Assessment of Literature Related to Combustion Appliance Venting Systems. LBNL-5798E 3 ABSTRACT In many by concerns about related impacts on the safety of naturally vented combustion appliances. Tighter housing

  6. Pipeline charging of coke ovens with a preheated charge

    SciTech Connect (OSTI)

    Karpov, A.V.; Khadzhioglo, A.V.; Kuznichenko, V.M.

    1983-01-01T23:59:59.000Z

    Work to test a pipeline charging method was conducted at the Konetsk Coke Works (a PK-2K coke oven system with a single gas main, oven width 407 mm, height 4300 mm, effective column 20.0 cm/sub 3/). This method consists of transporting the heated coal charge to the ovens through a pipe by means of steam. the charge is transported by high pressure chamber groups, and loaded by means of systems equipped with devices for separation, withdrawal and treatment of the spent steam. The principal goal of the present investigation was to test technical advances in the emission-free charging of preheated charges. The problem was, first, to create a reliable technology for separation of the steam from the charge immediately before loading it into the oven and, second, to provide a total elimination of emissions, thereby protecting the environment against toxic substances.

  7. Problem of improving coke oven gas purification systems

    SciTech Connect (OSTI)

    Goldin, I.A.

    1982-01-01T23:59:59.000Z

    A discussion of the problems of improving desulfurization processes of coke oven gas was presented. Of particular interest were control systems and increasing capacity of the coke ovens. Included in the discussion were the vacuum-carbonate and arsenic-soda sulfur removal systems. Problems involved with these systems were the number of treatment operations, the volume of the reagents used, and the operation of equipment for naphthalene and cyanide removal.

  8. New Energy Efficiency Standards for Microwave Ovens to Save Consumers...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    through 2030. Over the next 30 years, it will dramatically reduce harmful carbon pollution, equivalent to taking over 12 million new cars off the road for one year. "Appliance...

  9. Results of the Grid Friendly Appliance Project

    SciTech Connect (OSTI)

    Hammerstrom, Donald J.

    2010-04-14T23:59:59.000Z

    As part of the Pacific Northwest GridWise Testbed Demonstration funded by the U.S. Department of Energy and others, Pacific Northwest National Laboratory (PNNL) collaborated with Whirlpool Corporation, Invensys Controls, the Bonneville Power Administration, PacifiCorp, Portland General Electric and several smaller utilities to install 150 new Sears Kenmore clothes dryers and to retrofit 50 existing electric water heaters in homes in Washington and Oregon. Each dryer and water heater was configured to respond to the Grid Friendly appliance controller, a small electronic circuit that sensed underfrequency grid conditions and requested that electric load be shed by the appliances. These controllers and appliances were observed for over a year in residences spread over a wide geographic area. The controllers were found to respond predictably and reliably despite their geographic separation. Over 350 minor underfrequency events were observed during the experiment. This paper presents the distributions of these events by season and by time of day. Based on measured load profiles for the dryers and water heaters, the average electrical load that can be shed by each of the two appliance types was estimated by time of day and by season. Battelle Memorial Institute and PNNL have been assembling a suite of grid-responsive functions and benefits that can be achieved through the control of relatively small, distributed loads and resources on a power grid. These controllers should eventually receive acceptance for the opportunities they offer for circuit protection, regulation services, facilitation of demand responsiveness, and even power quality.

  10. Innovative coke oven gas cleaning system for retrofit applications

    SciTech Connect (OSTI)

    Not Available

    1992-08-24T23:59:59.000Z

    The coke plant at the Sparrows Point Plant consist of three coke oven batteries and two coal chemical plants. The by-product coke oven gas (COG) consists primarily of hydrogen, methane, carbon monoxide, nitrogen and contaminants consisting of tars, light oils (benzene, toluene, and xylene) hydrogen sulfide, ammonia, water vapor and other hydrocarbons. This raw coke oven gas needs to be cleaned of most of its contaminants before it can be used as a fuel at other operations at the Sparrows Point Plant. In response to environmental concerns, BSC decided to replace much of the existing coke oven gas treatment facilities in the two coal chemical Plants (A and B) with a group of technologies consisting of: Secondary Cooling of the Coke oven Gas; Hydrogen Sulfide Removal; Ammonia Removal; Deacification of Acid Gases Removed; Ammonia Distillation and Destruction; and, Sulfur Recovery. This combination of technologies will replace the existing ammonia removal system, the final coolers, hydrogen sulfide removal system and the sulfur recovery system. The existing wastewater treatment, tar recovery and one of the three light oil recovery systems will continue to be used to support the new innovative combination of COG treatment technologies.

  11. Appliances & Electronics | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: Alternative Fuels Data Center HomeIdle ReductionOfficesActive SolarAnnualAppliances &

  12. Low-cost Appliance State Sensing for Energy Disaggregation

    E-Print Network [OSTI]

    Wu, Tianji

    2012-01-01T23:59:59.000Z

    steps showing in the figure is the water dispenser heater.heaters or ovens. Several methods have been used in previous work to remove noise or detect step-

  13. New process for coke-oven gas desulfurization

    SciTech Connect (OSTI)

    Currey, J.H. [Citizens Gas and Coke Utility, Indianapolis, IN (United States)

    1995-10-01T23:59:59.000Z

    With the EPA reclassifying spent iron oxide as a hazardous waste material in 1990, an alternative technology was sought for desulfurizing coke-oven gas. Vacasulf technology was adopted for reasons that included: producing of coke battery heating gas without further polishing and high-quality elemental sulfur; lowest operating cost in comparison with other methods; no waste products; and integrates with existing ammonia destruction facility. Vacasulf requires a single purchased material, potassium hydroxide, that reacts with carbon dioxide in coke-oven gas to form potassium carbonate which, in turn, absorbs hydrogen sulfide. Operation of the system has been successful following the resolution of relatively minor start-up problems.

  14. Operating and maintenance benefits of automated oven wall temperature measurement

    SciTech Connect (OSTI)

    Leuchtmann, K.P. [Thyssen Still Otto Anlagentechnik GmbH, Bochum (Germany); Hinz, D.; Bergbau, D. [Ruhrkohle Bergbau AG, Bottrop (Germany). Prosper Coking Plant; Platts, M. [Thyssen Still Otto Technical Services, Pittsburgh, PA (United States)

    1997-12-31T23:59:59.000Z

    For a very long time and regardless of all shortcomings associated with it, the manual measurement of the heating flue temperature has been the only method of monitoring the temperature prevailing in a coke oven battery and discovering weak points in the heating system. In the course of the last few years a number of automated temperature measuring systems have been developed that are intended to replace or supplement the manual heating flue measurement system. These measuring systems and their advantages/disadvantages are briefly described in this paper. Additionally, operational experience gathered with the oven chamber wall temperature measuring system is discussed in detail.

  15. Hydrophilic structures for condensation management in refrigerator appliances

    DOE Patents [OSTI]

    Kuehl, Steven John; Vonderhaar, John J; Wu, Guolian; Wu, Mianxue

    2014-10-21T23:59:59.000Z

    A refrigerator appliance that includes a freezer compartment having a freezer compartment door, and a refrigeration compartment having at least one refrigeration compartment door. The appliance further includes a mullion with an exterior surface. The mullion divides the compartments and the exterior surface directs condensation toward a transfer point. The appliance may also include a cabinet that houses the compartments and has two sides, each with an exterior surface. Further, at least one exterior surface directs condensation toward a transfer point.

  16. Measure Guideline: Combustion Safety for Natural Draft Appliances Through Appliance Zone Isolation

    SciTech Connect (OSTI)

    Fitzgerald, J.; Bohac, D.

    2014-04-01T23:59:59.000Z

    This measure guideline covers how to assess and carry out the isolation of natural draft combustion appliances from the conditioned space of low-rise residential buildings. It deals with combustion appliances located either within the living space in enclosed closets or side rooms or outside the living space in an adjacent area like an attic or garage. This subset of houses does not require comprehensive combustion safety tests and simplified prescriptive procedures can be used to address safety concerns. This allows residential energy retrofit contractors inexperienced in advanced combustion safety testing to effectively address combustion safety issues and allow energy retrofits including tightening and changes to distribution and ventilation systems to proceed.

  17. appliances current situation: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    for copies of this document are available from: Public Reference Action Final Rule 66 Smart Meter Deployment Optimization for Efficient Electrical Appliance State Monitoring...

  18. appliance ownership survey: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    day's events and weather. The system stores information on the user Takahashi, Shin 87 Smart Meter Deployment Optimization for Efficient Electrical Appliance State Monitoring...

  19. appliance labeling rule: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    day's events and weather. The system stores information on the user Takahashi, Shin 54 Smart Meter Deployment Optimization for Efficient Electrical Appliance State Monitoring...

  20. appliances maeleudstyr og: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    day's events and weather. The system stores information on the user Takahashi, Shin 129 Smart Meter Deployment Optimization for Efficient Electrical Appliance State Monitoring...

  1. appliance markettransformation program: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    day's events and weather. The system stores information on the user Takahashi, Shin 42 Smart Meter Deployment Optimization for Efficient Electrical Appliance State Monitoring...

  2. ISSUANCE 2015-06-30: Appliance Standards and Rulemaking Federal...

    Energy Savers [EERE]

    Standards and Rulemaking Federal Advisory Committee: Notice of Intent to Establish the Central Air Conditioners and Heat Pumps Working Group ISSUANCE 2015-06-30: Appliance...

  3. HVAC, Water Heating, and Appliances Overview - 2015 BTO Peer...

    Office of Environmental Management (EM)

    HVAC, Water Heater and Appliance R&D - 2014 BTO Peer Review Research & Development Roadmap: Emerging HVAC Technologies This thermoelastic system provides a promising...

  4. appliance efficiency program: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of California eScholarship Repository Summary: 2002. Commercial Cooking Appliance Technology Assessment.technology costs reported in Table 1 are not included in these plots...

  5. Appliance Standards Program Schedule - CCE Overview and Update...

    Broader source: Energy.gov (indexed) [DOE]

    Meeting CCE Overview and Update Presenation, dated April 13, 2011 NEMA Distribution Transformers, CCE Overview and Update presentation, dated 05242011 Appliance Standards Program...

  6. Orange and Rockland Utilities (Electric)- Residential Appliance Recycling Program

    Broader source: Energy.gov [DOE]

    Orange and Rockland Utilities provides rebates for residential customers for recycling older, inefficient refrigerators and freezers. All appliances must meet the program requirements listed on the...

  7. appliances walking sticks: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    themselves and adolescents, children and adolescents have not provided any substantial data. (more) Walton, Daniel K. 2010-01-01 23 Appliance remanufacturing and life cycle...

  8. Kitchen Appliance Upgrades Improve Water Efficiency at DOD Exchange...

    Broader source: Energy.gov (indexed) [DOE]

    Kitchen Appliance Upgrades Improve Water Efficiency at DOD Exchange Facilities Case study details the U.S. Department of Defense (DOD) Exchange (formerly the Army and Air Force...

  9. Webinar: Appliance Standards and Rulemaking Federal Advisory Committee

    Broader source: Energy.gov [DOE]

    DOE is conducting a public meeting and webinar regarding the Appliance Standards and Rulemaking Federal Advisory Committee (ASRAC). For more information, please visit the ASRAC page.

  10. State Energy Efficient Appliance Rebate Program (SEEARP) reports...

    Open Energy Info (EERE)

    The successes and challenges of SEEARP provide valuable lessons for designing and running a consumer-focused appliance rebate program. In addition to the SEEARP reports...

  11. BSH Home Appliances: Proposed Penalty (2014-CE-23013)

    Broader source: Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that BSH Home Appliances Corporation failed to certify cooking products as compliant with the applicable energy conservation standards.

  12. T-588: HP Virtual SAN Appliance Stack Overflow

    Broader source: Energy.gov [DOE]

    A vulnerability has been reported in HP StorageWorks P4000 Virtual SAN Appliance Software, which can be exploited by malicious people to compromise a vulnerable system.

  13. Microwave vs. Electric Kettle: Which Appliance Is in Hot Water...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    is more efficient? Tell Us Addthis Microwave or electric kettle, which appliance should win the honor of heating your water? | Graphic by Stacy Buchanan, National Renewable Energy...

  14. Buying an Appliance this Holiday Season? ENERGY STAR Products...

    Office of Environmental Management (EM)

    Freezers Room air conditioners Televisions Clothes washers Dishwashers Battery chargers Water heaters Fluorescent lamp ballasts Incandescent reflector lamps If your appliance has...

  15. New packing in absorption systems for trapping benzene from coke-oven gas

    SciTech Connect (OSTI)

    V.V. Grabko; V.M. Li; T.A. Shevchenko; M.A. Solov'ev [Giprokoks, the State Institute for the Design of Coke-Industry Enterprises, Kharkov (Ukraine)

    2009-07-15T23:59:59.000Z

    The efficiency of benzene removal from coke-oven gas in absorption units OAO Alchevskkoks with new packing is assessed.

  16. COOKING APPLIANCE USE IN CALIFORNIA HOMES DATA COLLECTED FROM A WEB-BASED SURVEY

    SciTech Connect (OSTI)

    Klug, Victoria; Lobscheid, Agnes; Singer, Brett

    2011-08-01T23:59:59.000Z

    Cooking of food and use of natural gas cooking burners generate pollutants that can have substantial impacts on residential indoor air quality. The extent of these impacts depends on cooking frequency, duration and specific food preparation activities in addition to the extent to which exhaust fans or other ventilation measures (e.g. windows) are used during cooking. With the intent of improving our understanding of indoor air quality impacts of cooking-related pollutants, we created, posted and advertised a web-based survey about cooking activities in residences. The survey included questions similar to those in California's Residential Appliance Saturation Survey (RASS), relating to home, household and cooking appliance characteristics and weekly patterns of meals cooked. Other questions targeted the following information not captured in the RASS: (1) oven vs. cooktop use, the number of cooktop burners used and the duration of burner use when cooking occurs, (2) specific cooking activities, (3) the use of range hood or window to increase ventilation during cooking, and (4) occupancy during cooking. Specific cooking activity questions were asked about the prior 24 hours with the assumption that most people are able to recollect activities over this time period. We examined inter-relationships among cooking activities and patterns and relationships of cooking activities to household demographics. We did not seek to obtain a sample of respondents that is demographically representative of the California population but rather to inexpensively gather information from homes spanning ranges of relevant characteristics including the number of residents and presence or absence of children. This report presents the survey, the responses obtained, and limited analysis of the results.

  17. 9th Semi-Annual Report to Congress on Appliance Energy Efficiency...

    Office of Environmental Management (EM)

    to Congress on Appliance Energy Efficiency Rulemakings - Implementation Report: Energy Conservation Standards Activities 9th Semi-Annual Report to Congress on Appliance Energy...

  18. 3rd Semi-Annual Report to Congress on Appliance Energy-Efficiency...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    to Congress on Appliance Energy-Efficiency Rulemakings - Implementation Report: Energy Conservation Standards Activities 3rd Semi-Annual Report to Congress on Appliance...

  19. 17TH SEMI-ANNUAL REPORT TO CONGRESS ON APPLIANCE ENERGY EFFICIENCY...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    TO CONGRESS ON APPLIANCE ENERGY EFFICIENCY RULEMAKINGS - IMPLEMENTATION REPORT: ENERGY CONSERVATION STANDARDS ACTIVITIES 17TH SEMI-ANNUAL REPORT TO CONGRESS ON APPLIANCE ENERGY...

  20. 16th Semi-Annual Report to Congress on Appliance Energy Efficiency...

    Office of Environmental Management (EM)

    to Congress on Appliance Energy Efficiency Rulemakings - Implementation Report: Energy Conservation Standards Activities 16th Semi-Annual Report to Congress on Appliance Energy...

  1. 5th Semi-Annual Report to Congress on Appliance Energy-Efficiency...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    to Congress on Appliance Energy-Efficiency Rulemakings - Implementation Report: Energy Conservation Standards Activities 5th Semi-Annual Report to Congress on Appliance...

  2. 7th Semi-Annual Report to Congress on Appliance Energy Efficiency...

    Office of Environmental Management (EM)

    to Congress on Appliance Energy Efficiency Rulemakings - Implementation Report: Energy Conservation Standards Activities 7th Semi-Annual Report to Congress on Appliance Energy...

  3. 14th Semi-Annual Report to Congress on Appliance Energy Efficiency...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    to Congress on Appliance Energy Efficiency Rulemakings Implementation Report: Energy Conservation Standards Activities 14th Semi-Annual Report to Congress on Appliance Energy...

  4. Predicting Backdrafting and Spillage for Natural-Draft Gas Combustion Appliances: Validating VENT-II

    E-Print Network [OSTI]

    Rapp, Vi H.

    2014-01-01T23:59:59.000Z

    for Natural-Draft Gas Combustion Appliances: Validatingfor Natural-Draft Gas Combustion Appliances: A Validation ofs ability to predict combustion gas spillage events due to

  5. Data Availability in Appliance Standards and Labeling Program Development and Evaluation

    E-Print Network [OSTI]

    Romankiewicz, John

    2014-01-01T23:59:59.000Z

    by design option) Data Availability and Use InternationallyData Availability in Appliance Standards and Labelingemployer. Data Availability in Appliance Standards and

  6. Trends in the cost of efficiency for appliances and consumer electronics

    E-Print Network [OSTI]

    Desroches, Louis-Benoit

    2013-01-01T23:59:59.000Z

    appliances and consumer electronics Louis-Benoit Desroches,appliances and consumer electronics have decreased in realappliances and consumer electronics are likely to diminish

  7. U-247: EMC Cloud Tiering Appliance Flaw Lets Remote Users Bypass...

    Broader source: Energy.gov (indexed) [DOE]

    7: EMC Cloud Tiering Appliance Flaw Lets Remote Users Bypass Authentication and Gain Administrative Access U-247: EMC Cloud Tiering Appliance Flaw Lets Remote Users Bypass...

  8. Tips: Shopping for Appliances | Department of Energy

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directed off Energy.gov. Are you sure you want toworldPower 2010 1 TNews &Appliances Tips: Shopping for

  9. Tips: Smart Appliances | Department of Energy

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directed off Energy.gov. Are you sure you want toworldPower 2010 1 TNews &Appliances Tips:

  10. Appliance Standards Awareness Project | Department of Energy

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directed off Energy.gov. Are you0 ARRA NewslettersPartnership of the Americasfor a Clean EnergyAppliance

  11. Appliance Equipment Standards Northwest Impact Study

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office511041cloth DocumentationProductsAlternative FuelsSanta3 TableimpurityAppeals8I.1,,AttachmentAppliance

  12. Appliances and Commercial Equipment Standards: Guidance

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office511041cloth DocumentationProductsAlternative FuelsSanta3Appliance and Equipment Standards Fact

  13. appliance energy testing: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    appliance energy testing First Page Previous Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Next Page Last Page Topic Index 1 Energy Star Appliances 1 Texas...

  14. Utility Rebates for ENERGY STAR Appliances: Are They Effective?

    E-Print Network [OSTI]

    cost. The World Energy Outlook 2009, published by the International Energy Agency (IEA), highlightsUtility Rebates for ENERGY STAR Appliances: Are They Effective? Souvik Datta Sumeet Gulati CEPE;UTILITY REBATES FOR ENERGY STAR APPLIANCES: ARE THEY EFFECTIVE? SOUVIK DATTA ETH Zurich SUMEET GULATI

  15. Introducing a digital library reading appliance into a reading group

    E-Print Network [OSTI]

    Marshall, Cathy

    Introducing a digital library reading appliance into a reading group Catherine C. Marshall, Morgan will we read digital library materials? This paper describes the reading practices of an on-going reading group, and how these practices changed when we introduced XLibris, a digital library reading appliance

  16. Load Component Database of Household Appliances and Small Office Equipment

    SciTech Connect (OSTI)

    Lu, Ning; Xie, YuLong; Huang, Zhenyu; Puyleart, Francis; Yang, Steve

    2008-07-24T23:59:59.000Z

    This paper discusses the development of a load component database for household appliances and office equipment. To develop more accurate load models at both transmission and distribution level, a better understanding on the individual behaviors of home appliances and office equipment under power system voltage and frequency variations becomes more and more critical. Bonneville Power Administration (BPA) has begun a series of voltage and frequency tests against home appliances and office equipments since 2005. Since 2006, Researchers at Pacific Northwest National Laboratory has collaborated with BPA personnel and developed a load component database based on these appliance testing results to facilitate the load model validation work for the Western Electricity Coordinating Council (WECC). In this paper, the testing procedure and testing results are first presented. The load model parameters are then derived and grouped. Recommendations are given for aggregating the individual appliance models to feeder level, the models of which are used for distribution and transmission level studies.

  17. Incorporating Experience Curves in Appliance Standards Analysis

    SciTech Connect (OSTI)

    Garbesi, Karina; Chan, Peter; Greenblatt, Jeffery; Kantner, Colleen; Lekov, Alex; Meyers, Stephen; Rosenquist, Gregory; Buskirk, Robert Van; Yang, Hung-Chia; Desroches, Louis-Benoit

    2011-10-31T23:59:59.000Z

    The technical analyses in support of U.S. energy conservation standards for residential appliances and commercial equipment have typically assumed that manufacturing costs and retail prices remain constant during the projected 30-year analysis period. There is, however, considerable evidence that this assumption does not reflect real market prices. Costs and prices generally fall in relation to cumulative production, a phenomenon known as experience and modeled by a fairly robust empirical experience curve. Using price data from the Bureau of Labor Statistics, and shipment data obtained as part of the standards analysis process, we present U.S. experience curves for room air conditioners, clothes dryers, central air conditioners, furnaces, and refrigerators and freezers. These allow us to develop more representative appliance price projections than the assumption-based approach of constant prices. These experience curves were incorporated into recent energy conservation standards for these products. The impact on the national modeling can be significant, often increasing the net present value of potential standard levels in the analysis. In some cases a previously cost-negative potential standard level demonstrates a benefit when incorporating experience. These results imply that past energy conservation standards analyses may have undervalued the economic benefits of potential standard levels.

  18. Development of advanced technology of coke oven gas drainage treatment

    SciTech Connect (OSTI)

    Higashi, Tadayuki; Yamaguchi, Akikazu; Ikai, Kyozou; Kamiyama, Hisarou; Muto, Hiroshi

    1996-12-31T23:59:59.000Z

    In April 1994, commercial-scale application of ozone oxidation to ammonia liquor (which is primarily the water condensing from coke oven gas) to reduce its chemical oxygen demand (COD) was started at the Nagoya Works of Nippon Steel Corporation. This paper deals with the results of technical studies on the optimization of process operating conditions and the enlargement of equipment size and the operating purification system.

  19. Using Hidden Markov Models for Iterative Non-intrusive Appliance Monitoring

    E-Print Network [OSTI]

    Southampton, University of

    Using Hidden Markov Models for Iterative Non-intrusive Appliance Monitoring Oliver Parson, Hampshire, SO17 1BJ, UK {op106,sg2,mjw,acr}@ecs.soton.ac.uk Abstract Non-intrusive appliance load monitoring appliances. 1 Introduction Non-intrusive appliance load monitoring (NIALM), or energy disaggregation, aims

  20. Automatic coke oven heating control system at Burns Harbor for normal and repair operation

    SciTech Connect (OSTI)

    Battle, E.T.; Chen, K.L. [Bethlehem Steel Corp., Burns Harbor, IN (United States); [Bethlehem Steel Corp., PA (United States)

    1997-12-31T23:59:59.000Z

    An automatic heating control system for coke oven batteries was developed in 1985 for the Burns Harbor No. 1 battery and reported in the 1989 Ironmaking Conference Proceedings. The original system was designed to maintain a target coke temperature at a given production level under normal operating conditions. Since 1989, enhancements have been made to this control system so that it can also control the battery heating when the battery is under repair. The new control system has improved heating control capability because it adjusts the heat input to the battery in response to anticipated changes in the production schedule. During a recent repair of this 82 oven battery, the pushing schedule changed from 102 ovens/day to 88 ovens/day, then back to 102 ovens/day, then to 107 ovens/day. During this repair, the control system was able to maintain the coke temperature average standard deviation at 44 F, with a maximum 75 F.

  1. Nebraska Appliance Rebate Program opens | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Appliance Rebate Program opens July 12, 2010 - 4:00pm Addthis Lindsay Gsell Nearly 500 people lined up outside of Omaha's Nebraska Furniture Mart on July 6, waiting to get ENERGY...

  2. Innovative Concept Appliances: Proposed Penalty (2010-CE-03/0415)

    Broader source: Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Innovative Concept Appliances, LLC, failed to certify a variety of residential clothes washers and clothes dryers as compliant with the applicable energy conservation standards.

  3. ASKO Appliances: Proposed Penalty (2010-CE-04/0614)

    Broader source: Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that ASKO Appliances, Inc. failed to certify a variety of residential dishwashers and clothes dryers as compliant with the applicable energy conservation standards.

  4. Midea Washing Appliance: Proposed Penalty (2011-CE-1903)

    Broader source: Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Midea Washing Appliances Mfg. Co., Ltd. failed to certify a variety of dishwashers as compliant with the applicable water and energy conservation standards.

  5. Sales Tax Holiday for Energy-Efficient Appliances

    Broader source: Energy.gov [DOE]

    The state of Missouri offers consumers a seven-day ''exemption from state sales taxes'' on certain Energy Star certified new appliances. The state sales tax holiday, known as the "Show-Me Green...

  6. Detailed Modeling and Response of Demand Response Enabled Appliances

    SciTech Connect (OSTI)

    Vyakaranam, Bharat; Fuller, Jason C.

    2014-04-14T23:59:59.000Z

    Proper modeling of end use loads is very important in order to predict their behavior, and how they interact with the power system, including voltage and temperature dependencies, power system and load control functions, and the complex interactions that occur between devices in such an interconnected system. This paper develops multi-state time variant residential appliance models with demand response enabled capabilities in the GridLAB-DTM simulation environment. These models represent not only the baseline instantaneous power demand and energy consumption, but the control systems developed by GE Appliances to enable response to demand response signals and the change in behavior of the appliance in response to the signal. These DR enabled appliances are simulated to estimate their capability to reduce peak demand and energy consumption.

  7. The Videofil probe, a novel instrument to extend the coke oven service life

    SciTech Connect (OSTI)

    Gaillet, J.P.; Isler, D. [Centre de Pyrolyse de Marienau, Forbach (France)

    1997-12-31T23:59:59.000Z

    To prolong the service life of coke oven batteries, the Centre de Pyrolyse de Marienau developed the Videofil probe, a novel instrument to conduct diagnoses and to help repair operations of coke ovens. The Videofil probe is a flexible non-water-cooled endoscope which is used to locate flue wall damage and estimate its importance, to define the oven zones to repair and guide the repair work and to control the quality of the repair work and its durability.

  8. Modeling diffusion of electrical appliances in the residential sector

    SciTech Connect (OSTI)

    McNeil, Michael A.; Letschert, Virginie E.

    2009-11-22T23:59:59.000Z

    This paper presents a methodology for modeling residential appliance uptake as a function of root macroeconomic drivers. The analysis concentrates on four major energy end uses in the residential sector: refrigerators, washing machines, televisions and air conditioners. The model employs linear regression analysis to parameterize appliance ownership in terms of household income, urbanization and electrification rates according to a standard binary choice (logistic) function. The underlying household appliance ownership data are gathered from a variety of sources including energy consumption and more general standard of living surveys. These data span a wide range of countries, including many developing countries for which appliance ownership is currently low, but likely to grow significantly over the next decades as a result of economic development. The result is a 'global' parameterization of appliance ownership rates as a function of widely available macroeconomic variables for the four appliances studied, which provides a reliable basis for interpolation where data are not available, and forecasting of ownership rates on a global scale. The main value of this method is to form the foundation of bottom-up energy demand forecasts, project energy-related greenhouse gas emissions, and allow for the construction of detailed emissions mitigation scenarios.

  9. X-ray evaluation of coke-oven gas line deposits

    SciTech Connect (OSTI)

    Swain, Y.T.

    1983-08-01T23:59:59.000Z

    Control of coke-oven gas pipeline deposits has been facilitated through the use of an X-ray technique that provides quantitative data without disrupting plant operations.

  10. Takahax-Hirohax process for coke oven gas desulfurization

    SciTech Connect (OSTI)

    Gastwirth, H.; Miner, R.; Stengle, W.

    1981-01-01T23:59:59.000Z

    This paper describes the Takahax-Hirohax process to desulfurize coke oven gas and to produce an ammonium sulfate end product. A review is also made of current operating experience and recent technical developments. The Takahax-Hirohax process is extremely useful when the COG contains a suitable ammonia to sulfur ratio and when ammonium sulfate is a desirable end product. No contaminated effluent streams are emitted from the process. The process is simple, reliable, flexible, and responds easily to COG variations. 4 figures, 3 tables. (DP)

  11. A coke oven model including thermal decomposition kinetics of tar

    SciTech Connect (OSTI)

    Munekane, Fuminori; Yamaguchi, Yukio [Mitsubishi Chemical Corp., Yokohama (Japan); Tanioka, Seiichi [Mitsubishi Chemical Corp., Sakaide (Japan)

    1997-12-31T23:59:59.000Z

    A new one-dimensional coke oven model has been developed for simulating the amount and the characteristics of by-products such as tar and gas as well as coke. This model consists of both heat transfer and chemical kinetics including thermal decomposition of coal and tar. The chemical kinetics constants are obtained by estimation based on the results of experiments conducted to investigate the thermal decomposition of both coal and tar. The calculation results using the new model are in good agreement with experimental ones.

  12. Desulphurization of coke oven gas by the Stretford Process

    SciTech Connect (OSTI)

    Plenderleith, J.

    1981-01-01T23:59:59.000Z

    The Stretford process is probably the most effective means available for removing hydrogen sulphide from gas streams. For streams which do not contain hydrogen cyanide or excessive oxygen it should be nearly ideal. However, the large volume of waste liquor generated by fixation of hydrogen cyanide has prevented its widespread adoption for coke oven gas treatment. Investigations of various proposals for treating the waste liquor indicate that the only practicable way of dealing with it is by reductive incineration. Although attempts to apply the Peabody-Holmes reductive incineration process have been disappointing, significant progress in overcoming some of its deficiencies has been made. The Zimpro wet oxidation process will provide a convenient method of treating the HCN scrubber effluent at No. 1 Plant. However, it will not treat the sodium based liquor from the Stretford plant. Its application to Stretford waste treatment is limited to situations where ammonium liquors and ammonium sulphate recovery facilities are available. Commissioning of this plant has been delayed while a defect in the air compressor supplied for the plant is being remedied. When the problem of liquid effluent disposal has been overcome, and if reagent chemicals continue to be available at reasonable prices, the Stretford process will be a good choice for coke oven gas desulphurization. 8 figures.

  13. Innovative coke oven gas cleaning system for retrofit applications

    SciTech Connect (OSTI)

    Not Available

    1992-10-16T23:59:59.000Z

    Bethlehem Steel Corporation (BSC), in conjunction with the Department of Energy (DOE) is conducting a Clean Coal Technology (CCT) project at its Sparrows Point, Maryland Coke Oven Plant. This project combines several existing technologies into an integrated system for removing impurities from Coke Oven Gas (COG) to make it an acceptable fuel. DOE is providing cost-sharing under a Cooperative Agreement with BSC. This Cooperative Agreement requires BSC to develop and conduct an Environmental Monitoring Plan (EMP) for the Clean Coal Technology project and to report the status of the EMP on a quarterly basis. This report is the third quarterly status report of the EMP. It covers the Environmental Monitoring Plan activities for the full year of 1991 from January 1, 1991 through December 31, 1991, including the forth quarter. See Sections 2, 3 and 4 for status reports of the Project Installation and Commissioning, the Environmental Monitoring activities and the Compliance Monitoring results for the period. Section 5 contains a list of Compliance Reports submitted to regulatory agencies during the period. The EMP describes in detail the environmental monitoring activities to be performed during the project execution. The purpose of the EMP is to: (1) document the extent of compliance of monitoring activities, i.e. those monitoring required to meet permit requirements, (2) confirm the specific impacts predicted in the National Environmental Policy Act documentation, and (3) establish an information base for the assessment of the environmental performance of the technology demonstrated by the project.

  14. Factors affecting coking pressures in tall coke ovens

    SciTech Connect (OSTI)

    Grimley, J.J.; Radley, C.E. [British Steel plc, Scunthorpe (United Kingdom). Scunthorpe Works

    1995-12-01T23:59:59.000Z

    The detrimental effects of excessive coking pressures, resulting in the permanent deformation of coke oven walls, have been recognized for many years. Considerable research has been undertaken worldwide in attempts to define the limits within which a plant may safely operate and to quantify the factors which influence these pressures. Few full scale techniques are available for assessing the potential of a coal blend for causing wall damage. Inference of dangerous swelling pressures may be made however by the measurement of the peak gas pressure which is generated as the plastic layers meet and coalesce at the center of the oven. This pressure is referred to in this report as the carbonizing pressure. At the Dawes Lane cokemaking plant of British Steel`s Scunthorpe Works, a large database has been compiled over several years from the regulator measurement of this pressure. This data has been statistically analyzed to provide a mathematical model for predicting the carbonizing pressure from the properties of the component coals, the results of this analysis are presented in this report.

  15. Electrical appliance energy consumption control methods and electrical energy consumption systems

    DOE Patents [OSTI]

    Donnelly, Matthew K. (Kennewick, WA); Chassin, David P. (Pasco, WA); Dagle, Jeffery E. (Richland, WA); Kintner-Meyer, Michael (Richland, WA); Winiarski, David W. (Kennewick, WA); Pratt, Robert G. (Kennewick, WA); Boberly-Bartis, Anne Marie (Alexandria, VA)

    2008-09-02T23:59:59.000Z

    Electrical appliance energy consumption control methods and electrical energy consumption systems are described. In one aspect, an electrical appliance energy consumption control method includes providing an electrical appliance coupled with a power distribution system, receiving electrical energy within the appliance from the power distribution system, consuming the received electrical energy using a plurality of loads of the appliance, monitoring electrical energy of the power distribution system, and adjusting an amount of consumption of the received electrical energy via one of the loads of the appliance from an initial level of consumption to an other level of consumption different than the initial level of consumption responsive to the monitoring.

  16. Electrical appliance energy consumption control methods and electrical energy consumption systems

    DOE Patents [OSTI]

    Donnelly, Matthew K. (Kennewick, WA); Chassin, David P. (Pasco, WA); Dagle, Jeffery E. (Richland, WA); Kintner-Meyer, Michael (Richland, WA); Winiarski, David W. (Kennewick, WA); Pratt, Robert G. (Kennewick, WA); Boberly-Bartis, Anne Marie (Alexandria, VA)

    2006-03-07T23:59:59.000Z

    Electrical appliance energy consumption control methods and electrical energy consumption systems are described. In one aspect, an electrical appliance energy consumption control method includes providing an electrical appliance coupled with a power distribution system, receiving electrical energy within the appliance from the power distribution system, consuming the received electrical energy using a plurality of loads of the appliance, monitoring electrical energy of the power distribution system, and adjusting an amount of consumption of the received electrical energy via one of the loads of the appliance from an initial level of consumption to an other level of consumption different than the initial level of consumption responsive to the monitoring.

  17. Process Parameters and Energy Use of Gas and Electric Ovens in Industrial Applications

    E-Print Network [OSTI]

    Kosanovic, D.; Ambs, L.

    2000-01-01T23:59:59.000Z

    The study was conducted to evaluate the energy use of natural gas and electric ovens in the production of polymer bearings and components. Tests were conducted to evaluate and compare the performance of natural gas and electric ovens in the process...

  18. Process Parameters and Energy Use of Gas and Electric Ovens in Industrial Applications

    E-Print Network [OSTI]

    Kosanovic, D.; Ambs, L.

    The study was conducted to evaluate the energy use of natural gas and electric ovens in the production of polymer bearings and components. Tests were conducted to evaluate and compare the performance of natural gas and electric ovens in the process...

  19. Process for dissolving coke oven deposits comprising atomizing a composition containing N-methyl-2-pyrrolidone into the gas lines

    SciTech Connect (OSTI)

    Stafford, M.L.; Nicholson, G.M.

    1993-07-06T23:59:59.000Z

    A method is described for cleaning gas lines in coke oven batteries comprising atomizing a composition into the gas lines of coke oven batteries, where the composition comprises N-methyl-2-pyrrolidone.

  20. Predicting Backdrafting and Spillage for Natural-Draft Gas Combustion Appliances: Validating VENT-II

    E-Print Network [OSTI]

    1 Predicting Backdrafting and Spillage for Natural-Draft Gas Combustion Appliances: Validating VENT. "Predicting Backdrafting and Spillage for Natural-Draft Gas Combustion Appliances: A Validation of VENT

  1. V-021: Cisco IronPort Web / Email Security Appliance Sophos Anti...

    Broader source: Energy.gov (indexed) [DOE]

    1: Cisco IronPort Web Email Security Appliance Sophos Anti-Virus Multiple Vulnerabilities V-021: Cisco IronPort Web Email Security Appliance Sophos Anti-Virus Multiple...

  2. Coke oven gas desulphurization by the Carl Still process

    SciTech Connect (OSTI)

    Knight, R.E.

    1981-01-01T23:59:59.000Z

    The Steubenville East Coke Plant need a desulfurization process that would desulfurize an eventual 95 million standard cubic feet per day of coke oven gas from an inlet of 450 gr/DSCF to an outlet of 45 gr/DSCF of hydrogen sulfide. The Dravo/Still plant process was selected, due to the use of ammonia which was available in the gas, as the absorbing agent. It was also a proven process. Dravo/Still also was capable of building a sulfuric acid plant. The desulfurization efficiency of the plant has consistently provided an average final gas sulfur loading below the guaranteed 45 gr/DSCF. This removal efficiency has enabled production of an average of 4615 tons per day of 66/sup 0/Be acid. Also SO/sub 2/ to SO/sub 3/ conversion has averaged 98%. 3 figures. (DP)

  3. Method for removing hydrogen sulfide from coke oven gas

    SciTech Connect (OSTI)

    Ritter, H.

    1982-08-03T23:59:59.000Z

    An improved sulfur-ammonia process is disclosed for removing hydrogen sulfide from coke oven gases. In the improved process, a concentrator formerly used for standby operation is used at all normal times as an ammonia scrubber to improve the efficiency of gas separation during normal operation and is used as a concentrator for its intended standby functions during the alternative operations. In its normal function, the concentrator/scrubber functions as a scrubber to strip ammonia gas from recirculating liquid streams and to permit introduction of an ammonia-rich gas into a hydrogen sulfide scrubber to increase the separation efficiency of that unit. In the standby operation, the same concentrator/scrubber serves as a concentrator to concentrate hydrogen sulfide in a ''strong liquor'' stream for separate recovery as a strong liquor.

  4. Modelling of a coke oven heating wall M. Landreau, D. Isler, Centre de Pyrolyse de Marienau (CPM)

    E-Print Network [OSTI]

    Boyer, Edmond

    - 1 - Modelling of a coke oven heating wall M. Landreau, D. Isler, Centre de Pyrolyse de Marienau with thermomechanical modelling of a coke oven heating wall. The objective is to define the safe limits of coke oven of walls, roof and larry car, pre-stresses (anchoring system), lateral pressure due to coal pushing A 3D

  5. Impacts of China's Current Appliance Standards and Labeling Program to 2020

    E-Print Network [OSTI]

    Fridley, David; Aden, Nathaniel; Zhou, Nan; Lin, Jiang

    2007-01-01T23:59:59.000Z

    coal-fired electricity generation in China, appliance standards and labeling programs also help to mitigate air-pollution

  6. 11th Semi-Annual Report to Congress on Appliance Energy Efficiency...

    Office of Environmental Management (EM)

    Energy Conservation Standards Activities Buildings Home About Emerging Technologies Residential Buildings Commercial Buildings Appliance & Equipment Standards Building Energy Codes...

  7. Comment submitted by BSH Home Appliances Corporation regarding the Energy Star Verification Testing Program

    Broader source: Energy.gov [DOE]

    This document is a comment submitted by BSH Home Appliances Corporation regarding the Energy Star Verification Testing Program

  8. COMPRESSIVE SAMPLING FOR NON-INTRUSIVE APPLIANCE LOAD MONITORING (NALM) USING CURRENT WAVEFORMS

    E-Print Network [OSTI]

    Leus, Geert

    COMPRESSIVE SAMPLING FOR NON-INTRUSIVE APPLIANCE LOAD MONITORING (NALM) USING CURRENT WAVEFORMS advanced services like dynamic electricity pricing. The non-intrusive appliance load monitoring (NALM) [1/off status of each appliance from the compressed measurement as if the original non-compressed measurement

  9. Nonserial Dynamic Programming with Applications in Smart Home Appliances Scheduling Part I: Precedence Graph Simplification

    E-Print Network [OSTI]

    Johansson, Karl Henrik

    Nonserial Dynamic Programming with Applications in Smart Home Appliances Scheduling Part I-- In this and a companion paper a dynamic pro- gramming (DP) approach to solve a smart home appliances scheduling problem to the smart home appliances scheduling problem considered in [1], [2]. The problem seeks to determine

  10. Coke oven gas desulfurization: at Republic Steel's New Coking Facility, Warren, OH

    SciTech Connect (OSTI)

    Boak, S.C.; Prucha, D.G.; Turic, H.L.

    1981-01-01T23:59:59.000Z

    Our performance test indicates that the Sulfiban process is an effective method for removing H/sub 2/S from coke-oven gas. The process is able to handle variations in coke-oven gas flow and composition. Continuing efforts are underway to maintain optimum desulfurization conditions while trying to reduce waste production and MEA consumption. The problems which have prevented us from operating continuously have given us a better understanding of the process. This has contributed to better plant operations and greater equipment reliability for us to obtain continuous coke-oven gas desulfurization. 2 figures, 1 table.

  11. Progressive Powder Coating: New Infrared Curing Oven at Metal Finishing Plant Increases Production by 50%

    SciTech Connect (OSTI)

    Not Available

    2003-05-01T23:59:59.000Z

    Progressive Powder Coating in Mentor, Ohio, is a metal finishing plant that uses a convection oven in its manufacturing process. In an effort to save energy and improve production, the company installed an infrared oven in between the powder coating booth and the convection oven on its production line. This installation allowed the plant to increase its conveyor line speed and increase production by 50 percent. In addition, the plant reduced its natural gas consumption, yielding annual energy savings of approximately$54,000. With a total project cost of$136,000, the simple payback is 2.5 years.

  12. COOKING APPLIANCE USE IN CALIFORNIA HOMES--DATA

    E-Print Network [OSTI]

    COOKING APPLIANCE USE IN CALIFORNIA HOMES--DATA COLLECTED FROM A WEB-BASED SURVEY Victoria L. Klug, Agnes B. Lobscheid, and Brett C. Singer Environmental Energy Technologies Division August 2011 LBNL-5028 FROM A WEB-BASED SURVEY Victoria L. Klug, Agnes B. Lobscheid, and Brett C. Singer Indoor Environment

  13. Smart Meter Deployment Optimization for Efficient Electrical Appliance State Monitoring

    E-Print Network [OSTI]

    Wang, Yongcai

    appliances in buildings has attracted great attentions for smart, green and sustainable living. Traditional hard, greedy algorithm, approxi- mation ratio, smart building, sensor network I. INTRODUCTION in such buildings, researches in the field of smart building and smart grid are exploring an efficient energy

  14. Monitoring Massive Appliances by a Minimal Number of Smart Meters

    E-Print Network [OSTI]

    Wang, Yongcai

    56 Monitoring Massive Appliances by a Minimal Number of Smart Meters YONGCAI WANG, XIAOHONG HAO. This article presents a framework for deploying a minimal number of smart meters to accurately track the ON of required smart meters is studied by an entropy-based approach, which qualifies the impact of meter

  15. Leveraging smart meter data to recognize home appliances Markus Weiss+#

    E-Print Network [OSTI]

    Leveraging smart meter data to recognize home appliances Markus Weiss+# , Adrian Helfenstein -- The worldwide adoption of smart meters that measure and communicate residential electricity consumption gives demand. In this paper we present an infrastructure and a set of algorithms that make use of smart meters

  16. Rebound Effect in Energy Efficient Appliance Adopting Households

    E-Print Network [OSTI]

    Glenn, Jacob Matthew

    2014-12-10T23:59:59.000Z

    This paper uses data from smart meter technology to estimate the occurrence of energy rebound, a substitution and income effect where the price-per-use of an appliance falls relative to its energy efficiency. This causes households to have more...

  17. Combustion Safety for Appliances Using Indoor Air (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2014-05-01T23:59:59.000Z

    This measure guideline covers how to assess and carry out the combustion safety procedures for appliances and heating equipment that uses indoor air for combustion in low-rise residential buildings. Only appliances installed in the living space, or in an area freely communicating with the living space, vented alone or in tandem with another appliance are considered here. A separate measure guideline addresses combustion appliances located either within the living space in enclosed closets or side rooms or outside the living space in an adjacent area like an attic or garage that use outdoor air for combustion. This document is for inspectors, auditors, and technicians working in homes where energy upgrades are being conducted whether or not air infiltration control is included in the package of measures being applied. In the indoor combustion air case, guidelines summarized here are based on language provided in several of the codes to establish minimum requirements for the space using simplified prescriptive measures. In addition, building performance testing procedures are provided by testing agencies. The codes in combination with the test procedures offer comprehensive combustion safety coverage to address safety concerns, allowing inexperienced residential energy retrofit inspectors to effectively address combustion safety issues and allow energy retrofits to proceed.

  18. ISSUANCE 2015-06-08: Solicitation of Nominations for Membership on the Appliance Standards and Rulemaking Federal Advisory Committee

    Broader source: Energy.gov [DOE]

    Solicitation of Nominations for Membership on the Appliance Standards and Rulemaking Federal Advisory Committee

  19. A System for Smart Home Control of Appliances based on Timer and Speech Interaction

    E-Print Network [OSTI]

    Haque, S M Anamul; Islam, Md Ashraful

    2010-01-01T23:59:59.000Z

    The main objective of this work is to design and construct a microcomputer based system: to control electric appliances such as light, fan, heater, washing machine, motor, TV, etc. The paper discusses two major approaches to control home appliances. The first involves controlling home appliances using timer option. The second approach is to control home appliances using voice command. Moreover, it is also possible to control appliances using Graphical User Interface. The parallel port is used to transfer data from computer to the particular device to be controlled. An interface box is designed to connect the high power loads to the parallel port. This system will play an important role for the elderly and physically disable people to control their home appliances in intuitive and flexible way. We have developed a system, which is able to control eight electric appliances properly in these three modes.

  20. Modeling of GE Appliances: Cost Benefit Study of Smart Appliances in Wholesale Energy, Frequency Regulation, and Spinning Reserve Markets

    SciTech Connect (OSTI)

    Fuller, Jason C.; Parker, Graham B.

    2012-12-31T23:59:59.000Z

    This report is the second in a series of three reports describing the potential of GEs DR-enabled appliances to provide benefits to the utility grid. The first report described the modeling methodology used to represent the GE appliances in the GridLAB-D simulation environment and the estimated potential for peak demand reduction at various deployment levels. The third report will explore the technical capability of aggregated group actions to positively impact grid stability, including frequency and voltage regulation and spinning reserves, and the impacts on distribution feeder voltage regulation, including mitigation of fluctuations caused by high penetration of photovoltaic distributed generation. In this report, a series of analytical methods were presented to estimate the potential cost benefit of smart appliances while utilizing demand response. Previous work estimated the potential technical benefit (i.e., peak reduction) of smart appliances, while this report focuses on the monetary value of that participation. The effects on wholesale energy cost and possible additional revenue available by participating in frequency regulation and spinning reserve markets were explored.

  1. Bethlehem Steel announces plans to control coke oven air and water pollution

    SciTech Connect (OSTI)

    Not Available

    1989-08-01T23:59:59.000Z

    Bethlehem Steel Corporation and the Maryland Department of the Environment have announced an agreement under which Bethlehem will spend an estimated $92-million at its Sparrows Points, Md., plant for technologically-advanced controls to further reduce air and water pollution, mainly from the plant's coke ovens. The two major systems include one to treat by-product coke oven gas and chemicals, and another to upgrade existing pushing emission controls on two older coke oven batteries. One of the new systems will replace most of the existing equipment that cleans gas and treats chemicals created by the coking process at the plant's three coke oven batteries. Because this system has the potential to greatly reduce sulfur dioxide and other pollutants, the United States Department of Energy (DOE) in September announced that its installation qualified for funding as part of the nationwide Innovative Clean Coal Technology Program.

  2. Additional Steam Traps Increase Production of a Drum Oven at a Petroleum Jelly Plant

    SciTech Connect (OSTI)

    Not Available

    2002-03-01T23:59:59.000Z

    Additional steam traps were installed on the drum oven at a petroleum jelly production facility at an ExxonMobil plant in Nigeria. The installation improved heat transfer and saved energy.

  3. Acoustic emission feedback control for control of boiling in a microwave oven

    DOE Patents [OSTI]

    White, Terry L. (Oak Ridge, TN)

    1991-01-01T23:59:59.000Z

    An acoustic emission based feedback system for controlling the boiling level of a liquid medium in a microwave oven is provided. The acoustic emissions from the medium correlated with surface boiling is used to generate a feedback control signal proportional to the level of boiling of the medium. This signal is applied to a power controller to automatically and continuoulsly vary the power applied to the oven to control the boiling at a selected level.

  4. Heating control methodology in coke oven battery at Rourkela Steel Plant

    SciTech Connect (OSTI)

    Bandyopadhyay, S.S.; Parthasarathy, L.; Gupta, A.; Bose, P.R.; Mishra, U.

    1996-12-31T23:59:59.000Z

    A methodology of heating control was evolved incorporating temperature data generated through infra-red sensor at quenching station and thermocouples specially installed in the gooseneck of coke oven battery No. 3 of RSP. Average temperature of the red-hot coke as pushed helps in diagnosis of the abnormal ovens and in setting the targeted battery temperature. A concept of coke readiness factor (Q) was introduced which on optimization resulted in lowering the specific heat consumption by 30 KCal/Kg.

  5. Development of automatic operation system for coke oven machines at Yawata Works of Nippon Steel Corporation

    SciTech Connect (OSTI)

    Matsunaga, Masao; Uematsu, Hiroshi; Nakagawa, Yoji; Ishiharaguchi, Yuji

    1995-12-01T23:59:59.000Z

    The coke plant is a working environment involving heavy dust emissions, high heat and demanding physical labor. The labor-saving operation of the coke plant is an essential issue from the standpoints of not only improvement in working environment, but also reduction in fixed cost by enhancement of labor productivity. Under these circumstances, Nippon Steel has implemented the automation of coke oven machines. The first automatic operation system for coke oven machinery entered service at Oita Works in 1992, followed by the second system at the No. 5 coke oven battery of the coke plant at Yawata Works. The Yawata automatic operation system is characterized by the installation of coke oven machinery to push as many as 140 ovens per day within a short cycle time, such as a preliminary ascension pipe cap opening car and cycle time simulator by the manned operation of the pusher, which is advantageous from the standpoint of investment efficiency, and by the monitoring of other oven machines by the pusher. These measures helped to reduce the manpower requirement to 2 persons per shift from 4 persons per shift. The system entered commercial operation in March, 1994 and has been smoothly working with an average total automatic rate of 97%. Results from the startup to recent operation of the system are reported below.

  6. Design Considerations for Frequency Responsive Grid Friendly Appliances

    SciTech Connect (OSTI)

    Lu, Ning; Hammerstrom, Donald J.

    2006-05-24T23:59:59.000Z

    The paper addresses design considerations for frequency responsive Grid FriendlyTM appliances (FR-GFAs). Case studies have been done based on the frequency data collected in 2003 in Western Electricity Coordinating Council (WECC) systems. An FR-GFA can turn on/off based on frequency signals and make selective low-frequency load shedding possible at appliance level. FR-GFAs can also be treated as an spinning reserve to maintain a load-to-generation balance under power system normal operation states. The triggering frequency and duration of the FR-GFA device with different frequency setting schemes are simulated. Design considerations of the FR-GFA are then discussed based on simulation results.

  7. Progress toward Producing Demand-Response-Ready Appliances

    SciTech Connect (OSTI)

    Hammerstrom, Donald J.; Sastry, Chellury

    2009-12-01T23:59:59.000Z

    This report summarizes several historical and ongoing efforts to make small electrical demand-side devices like home appliances more responsive to the dynamic needs of electric power grids. Whereas the utility community often reserves the word demand response for infrequent 2 to 6 hour curtailments that reduce total electrical system peak load, other beneficial responses and ancillary services that may be provided by responsive electrical demand are of interest. Historically, demand responses from the demand side have been obtained by applying external, retrofitted, controlled switches to existing electrical demand. This report is directed instead toward those manufactured products, including appliances, that are able to provide demand responses as soon as they are purchased and that require few, or no, after-market modifications to make them responsive to needs of power grids. Efforts to be summarized include Open Automated Demand Response, the Association of Home Appliance Manufacturer standard CHA 1, a simple interface being developed by the U-SNAP Alliance, various emerging autonomous responses, and the recent PinBus interface that was developed at Pacific Northwest National Laboratory.

  8. Laboratory Testing of Demand-Response Enabled Household Appliances

    SciTech Connect (OSTI)

    Sparn, B.; Jin, X.; Earle, L.

    2013-10-01T23:59:59.000Z

    With the advent of the Advanced Metering Infrastructure (AMI) systems capable of two-way communications between the utility's grid and the building, there has been significant effort in the Automated Home Energy Management (AHEM) industry to develop capabilities that allow residential building systems to respond to utility demand events by temporarily reducing their electricity usage. Major appliance manufacturers are following suit by developing Home Area Network (HAN)-tied appliance suites that can take signals from the home's 'smart meter,' a.k.a. AMI meter, and adjust their run cycles accordingly. There are numerous strategies that can be employed by household appliances to respond to demand-side management opportunities, and they could result in substantial reductions in electricity bills for the residents depending on the pricing structures used by the utilities to incent these types of responses.The first step to quantifying these end effects is to test these systems and their responses in simulated demand-response (DR) conditions while monitoring energy use and overall system performance.

  9. An Analysis of the Price Elasticity of Demand for Household Appliances

    SciTech Connect (OSTI)

    Fujita, Kimberly; Dale, Larry; Fujita, K. Sydny

    2008-01-25T23:59:59.000Z

    This report summarizes our study of the price elasticity of demand for home appliances, including refrigerators, clothes washers, and dishwashers. In the context of increasingly stringent appliance standards, we are interested in what kind of impact the increased manufacturing costs caused by higher efficiency requirements will have on appliance sales. We begin with a review of existing economics literature describing the impact of economic variables on the sale of durable goods.We then describe the market for home appliances and changes in this market over the past 20 years, performing regression analysis on the shipments of home appliances and relevant economic variables including changes to operating cost and household income. Based on our analysis, we conclude that the demand for home appliances is price inelastic.

  10. Pacific Northwest GridWise Testbed Demonstration Projects; Part II. Grid Friendly Appliance Project

    SciTech Connect (OSTI)

    Hammerstrom, Donald J.; Brous, Jerry; Chassin, David P.; Horst, Gale R.; Kajfasz, Robert; Michie, Preston; Oliver, Terry V.; Carlon, Teresa A.; Eustis, Conrad; Jarvegren, Olof M.; Marek, W.; Munson, Ryan L.; Pratt, Robert G.

    2007-10-01T23:59:59.000Z

    Fifty residential electric water heaters and 150 new residential clothes dryers were modified to respond to signals received from underfrequency, load-shedding appliance controllers. Each controller monitored the power-grid voltage signal and requested that electrical load be shed by its appliance whenever electric power-grid frequency fell below 59.95 Hz. The controllers and their appliances were installed and monitored for more than a year at residential sites at three locations in Washington and Oregon. The controllers and their appliances responded reliably to each shallow underfrequency eventan average of one event per dayand shed their loads for the durations of these events. Appliance owners reported that the appliance responses were unnoticed and caused little or no inconvenience for the homes occupants.

  11. Load control in low voltage level of the electricity grid using CHP appliances

    E-Print Network [OSTI]

    Al Hanbali, Ahmad

    1 Load control in low voltage level of the electricity grid using µCHP appliances M.G.C. Bosman, V.g.c.bosman@utwente.nl Abstract--The introduction of µCHP (Combined Heat and Power) appliances and other means of distributed on the transformers and, thus, on the grid. In this work we study the influence of introducing µCHP appliances

  12. Development of a high-temperature oven for the 28 GHz electron cyclotron resonance ion source

    SciTech Connect (OSTI)

    Ohnishi, J., E-mail: ohnishi@riken.jp; Higurashi, Y.; Kidera, M.; Ozeki, K.; Nakagawa, T. [RIKEN Nishina Center, Wako, Saitama 351-0198 (Japan)] [RIKEN Nishina Center, Wako, Saitama 351-0198 (Japan)

    2014-02-15T23:59:59.000Z

    We have been developing the 28 GHz ECR ion source in order to accelerate high-intensity uranium beams at the RIKEN RI-beam Factory. Although we have generated U{sup 35+} beams by the sputtering method thus far, we began developing a high-temperature oven with the aim of increasing and stabilizing the beams. Because the oven method uses UO{sub 2}, a crucible must be heated to a temperature higher than 2000?C to supply an appropriate amount of UO{sub 2} vapor to the ECR plasma. Our high-temperature oven uses a tungsten crucible joule-heated with DC current of approximately 450 A. Its inside dimensions are ?11 mm 13.5 mm. Since the crucible is placed in a magnetic field of approximately 3 T, it is subject to a magnetic force of approximately 40 N. Therefore, we used ANSYS to carefully design the crucible, which was manufactured by machining a tungsten rod. We could raise the oven up to 1900?C in the first off-line test. Subsequently, UO{sub 2} was loaded into the crucible, and the oven was installed in the 28 GHz ECR ion source and was tested. As a result, a U{sup 35+} beam current of 150 ?A was extracted successfully at a RF power of approximately 3 kW.

  13. 6th Semi-Annual Report to Congress on Appliance Energy Efficiency...

    Broader source: Energy.gov (indexed) [DOE]

    to Congress on Appliance Energy Efficiency Rulemakings - Implementation Report: Energy Conservation Standards Activities, as issued by the Assistant Secretary on February 2009....

  14. 8th Semi-Annual Report to Congress on Appliance Energy Efficiency...

    Broader source: Energy.gov (indexed) [DOE]

    to Congress on Appliance Energy Efficiency Rulemakings - Implementation Report: Energy Conservation Standards Activities, as issued by the Deputy Assistant Secretary on February...

  15. 2nd Semi-Annual Report to Congress on Appliance Energy-Efficiency...

    Broader source: Energy.gov (indexed) [DOE]

    to Congress on Appliance Energy-Efficiency Rulemakings - Implementation Report: Energy Conservation Standards Activities, as issued by the Assistant Secretary on February 2007....

  16. 15th Semi-Annual Report to Congress on Appliance Energy Efficiency...

    Broader source: Energy.gov (indexed) [DOE]

    Congress on Appliance Energy Efficiency Rulemakings - Implementation Report: Energy Conservation Standards Activities, as issued by the Assistant Secretary on February 2014....

  17. 4th Semi-Annual Report to Congress on Appliance Energy-Efficiency...

    Broader source: Energy.gov (indexed) [DOE]

    to Congress on Appliance Energy-Efficiency Rulemakings - Implementation Report: Energy Conservation Standards Activities, as issued by the Assistant Secretary on February 2008....

  18. 10th Semi-Annual Report to Congress on Appliance Energy Efficiency...

    Broader source: Energy.gov (indexed) [DOE]

    to Congress on Appliance Energy Efficiency Rulemakings - Implementation Report: Energy Conservation Standards Activities, as issued by the Assistant Secretary on August 2011....

  19. 1st Semi-Annual Report to Congress on Appliance Energy-Efficiency...

    Broader source: Energy.gov (indexed) [DOE]

    to Congress on Appliance Energy-Efficiency Rulemakings - Implementation Report: Energy Conservation Standards Activities, as issued by the Assistant Secretary on August 2006....

  20. Pollutant Emission Factors from Residential Natural Gas Appliances: A Literature Review

    E-Print Network [OSTI]

    Traynor, G.W.

    2011-01-01T23:59:59.000Z

    journals related to natural gas combustion and air pollutionemitted from natural gas combustion are predominately lessNatural Gas- fired Appliances," Proceedings: How Significant Are Residential Combustion

  1. Impacts of Imported Liquefied Natural Gas on Residential Appliance Components: Literature Review

    E-Print Network [OSTI]

    Lekov, Alex

    2010-01-01T23:59:59.000Z

    Fundamentals of Gas Combustion. 2001: Washington, DC. 131Components A gas appliance combustion system accomplishestransfers energy from hot combustion gases to water or air

  2. Pollutant Emission Factors from Residential Natural Gas Appliances: A Literature Review

    E-Print Network [OSTI]

    Traynor, G.W.

    2011-01-01T23:59:59.000Z

    related to natural gas combustion and air pollution wereemitted from natural gas combustion are predominately lessGas- fired Appliances," Proceedings: How Significant Are Residential Combustion

  3. Impacts of Imported Liquefied Natural Gas on Residential Appliance Components: Literature Review

    E-Print Network [OSTI]

    Lekov, Alex

    2010-01-01T23:59:59.000Z

    which, in the case of home heating appliances, could resultHeaters, Direct Heating Equipment, Mobile Home Furnaces,Heaters, Direct Heating Equipment, Mobile Home Furnaces,

  4. Evaluation of Waste Heat Recovery and Utilization from Residential Appliances and Fixtures

    SciTech Connect (OSTI)

    Tomlinson, John J [ORNL; Christian, Jeff [Oak Ridge National Laboratory (ORNL); Gehl, Anthony C [ORNL

    2012-09-01T23:59:59.000Z

    Executive Summary In every home irrespective of its size, location, age, or efficiency, heat in the form of drainwater or dryer exhaust is wasted. Although from a waste stream, this energy has the potential for being captured, possibly stored, and then reused for preheating hot water or air thereby saving operating costs to the homeowner. In applications such as a shower and possibly a dryer, waste heat is produced at the same time as energy is used, so that a heat exchanger to capture the waste energy and return it to the supply is all that is needed. In other applications such as capturing the energy in drainwater from a tub, dishwasher, or washing machine, the availability of waste heat might not coincide with an immediate use for energy, and consequently a heat exchanger system with heat storage capacity (i.e. a regenerator) would be necessary. This study describes a two-house experimental evaluation of a system designed to capture waste heat from the shower, dishwasher clothes washer and dryer, and to use this waste heat to offset some of the hot water energy needs of the house. Although each house was unoccupied, they were fitted with equipment that would completely simulate the heat loads and behavior of human occupants including operating the appliances and fixtures on a demand schedule identical to Building American protocol (Hendron, 2009). The heat recovery system combined (1) a gravity-film heat exchanger (GFX) installed in a vertical section of drainline, (2) a heat exchanger for capturing dryer exhaust heat, (3) a preheat tank for storing the captured heat, and (4) a small recirculation pump and controls, so that the system could be operated anytime that waste heat from the shower, dishwasher, clothes washer and dryer, and in any combination was produced. The study found capturing energy from the dishwasher and clothes washer to be a challenge since those two appliances dump waste water over a short time interval. Controls based on the status of the dump valve on these two appliances would have eliminated uncertainty in knowing when waste water was flowing and the recovery system operated. The study also suggested that capture of dryer exhaust heat to heat incoming air to the dryer should be examined as an alternative to using drying exhaust energy for water heating. The study found that over a 6-week test period, the system in each house was able to recover on average approximately 3000 W-h of waste heat daily from these appliance and showers with slightly less on simulated weekdays and slightly more on simulated weekends which were heavy wash/dry days. Most of these energy savings were due to the shower/GFX operation, and the least savings were for the dishwasher/GFX operation. Overall, the value of the 3000 W-h of displaced energy would have been $0.27/day based on an electricity price of $.09/kWh. Although small for today s convention house, these savings are significant for a home designed to approach maximum affordable efficiency where daily operating costs for the whole house are less than a dollar per day. In 2010 the actual measured cost of energy in one of the simulated occupancy houses which waste heat recovery testing was undertaken was $0.77/day.

  5. 2014 Annual AFN Convention

    Broader source: Energy.gov [DOE]

    The AFN Convention is the largest representative annual gathering in the United States of any Native peoples. In addition to the memorable keynote speeches, the expert panels and special reports, the Convention features several evenings of cultural performances known as Quyana Alaska.

  6. Use of ethylenediamine to remove hydrogen sulfide from coke oven gas

    SciTech Connect (OSTI)

    Marakhovskii, L.F.; Popov, A.A.; Rezunenko, Yu.I.

    1983-01-01T23:59:59.000Z

    The investigations of the equilibrium absorption of H/sub 2/S by an EDA solution which show that the solubility of hydrogen sulfide in ethylenediamine solutions is almost twice that in monoethanolamine solutions. Ethylenediamine may be used as an absorber for thorough removal of H/sub 2/S from coke oven gas in the presence of CO/sub 2/ and HCN. The hydrogen cyanide of coke oven gas, having practically no effect on the equilibrium absorption of H/sub 2/S and CO/sub 2/, may in this case be recovered in the form of ethylenethiourea - a marketable byproduct.

  7. The use of ethylenediamine to remove hydrogen sulfide from coke oven gas

    SciTech Connect (OSTI)

    Marakhovskii, L.F.; Rezunenko, Y.I.; Popov, A.A.

    1983-01-01T23:59:59.000Z

    The investigations of the equilibrium absorption of H/sub 2/S by an EDA solution showed the solubility of hydrogen sulfide in ethylenediamine solutions is almost twice that in monoethanolamine solutions. Ethylenediamine may be used as an absorber for thorough removal of H/sub 2/S from coke oven gas in the presence of CO/sub 2/ and HCN. The hydrogen cyanide of coke oven gas, having practically no effect on the equilibrium absorption of H/sub 2/S and CO/sub 2/, may in this case be used in the form of ethylenethiourea - a marketable byproduct.

  8. New energy test procedures for refrigerators and other appliances

    SciTech Connect (OSTI)

    Meier, Alan; Ernebrant, Stefan; Kawamoto, Kaoru; Wihlborg, Mats

    1999-04-01T23:59:59.000Z

    Many innovations in refrigerator design rely on microprocessors, sensors, and algorithms to control automatic defrost, variable speed,and other features. Even though these features strongly influence energy consumption, the major energy test procedures presently test only a refrigerator's mechanical efficiency and ignore the ''software'' aspects. We describe a new test procedure where both ''hardware'' and ''software'' tests are fed into a dynamic simulation model. A wide range of conditions can be tested and simulated. This approach promotes international harmonization because the simulation model can also be programmed to estimate energy use for the ISO, DOE, or JIS test. The approach outlined for refrigerators can also be applied to other appliances.

  9. Appliance energy efficiency in new home construction. Final report

    SciTech Connect (OSTI)

    Not Available

    1980-11-30T23:59:59.000Z

    A survey of 224 builders was conducted to which 160 builders responded. Each respondent completed between one and seven separate questionnaires. Each of the seven questionnaires were designed to collect information about one type of equipment or major appliance. These are: heat pump; heating system; air conditioner; domestic water heater; dishwasher; range; and refrigerator. Analysis of the resulting 406 questionnaires indicated that builders were primarily responsible for brand selection. These choices were made primarily without regard for the energy efficiency of the product. A similar apparent lack of consideration of energy efficiency during brand and model selection was found among home buyers and specialized subcontractors.

  10. A State-Queueing Model of Thermostatically Controlled Appliances

    SciTech Connect (OSTI)

    Lu, Ning; Chassin, David P.

    2004-08-01T23:59:59.000Z

    This paper develops a new method to analyze the price response of aggregated loads consisting of thermostatically controlled appliances (TCAs). Assuming a perfectly diversified load before the price response, we show that TCA setpoint changes in response to the market price will result in a redistribution of TCAs in on/off states and therefore change the probabilities for a unit to reside in each state. A randomly distributed load can be partially synchronized and the aggregated diversity lost. The lost of the load diversity can then create unexpected dynamics in the aggregated load profile. Raising issues such as restoring load diversity and damping the peak loads are also addressed in the paper.

  11. GE Appliances: Order (2012-SE-1403) | Department of Energy

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directed offOCHCO2: FinalOffers3.pdf0-45.pdf0 Budget Fossil EnergyFull Text ManagementDOEGE Appliances: Order

  12. DOE Issues Final Appliance Test Procedure Rule | Department of Energy

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 111 1,613PortsmouthBartlesvilleAbout »Department of2 DOE F 1300.2Million) GoDOEMedicalAppliance

  13. Appliance and Equipment Standards Program | Department of Energy

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directed off Energy.gov. Are you sure you want toworldPower 2010 1A PotentialAllison CaseyAnnualAppliance and

  14. Research & Development Roadmap: Next-Generation Appliances | Department of

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 1112011 Strategic2 OPAM615_CostNSAR -Department ofEMSpent NuclearEnergy Appliances Research

  15. Save Energy on Appliances this Holiday Season | Department of Energy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of ScienceandMesa del Sol HomeFacebook Twitter Principal InvestigatorsSave Energy on Appliances this

  16. Estimating Appliance and Home Electronic Energy Use | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page onYouTube YouTube Note: Since the YouTube|6721 FederalTexas EnergyofIdaho | Department of EnergyEstimating Appliance

  17. Appliance Rebates: Frequently Asked Questions | Department of Energy

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directed offOCHCO Overview OCHCOSystemsProgram OverviewAdvocate -AmirAnnual ReportAppliance Rebates:

  18. Recently a lot of multimedia applications are emerging on portable appliances. They require both the flexibility of

    E-Print Network [OSTI]

    Paris-Sud XI, Universit de

    Abstract Recently a lot of multimedia applications are emerging on portable appliances and not only prototypes. Reconfigurable FPGA's are particularly suited for multimedia applications on portable appliances. In fact, tomorrow's multimedia applications will require both the flexibility of upgradeable

  19. Hydrogen production from steam reforming of coke oven gas and its utility for indirect reduction of iron oxides in blast

    E-Print Network [OSTI]

    Leu, Tzong-Shyng "Jeremy"

    of coal and coke are consumed for heating and reducing iron oxides [2,3]. As a result, BFs have becomeHydrogen production from steam reforming of coke oven gas and its utility for indirect reduction 2012 Available online 18 June 2012 Keywords: Steam reforming Hydrogen and syngas production Coke oven

  20. "Table HC15.10 Home Appliances Usage Indicators by Four Most...

    U.S. Energy Information Administration (EIA) Indexed Site

    AppliancesTools",56.2,5,3.4,4.3,6.2 "Other Appliances Used" "Auto BlockEngineBattery Heater",0.8,"Q","N","N","N" "Hot Tub or Spa",6.7,"Q",0.7,0.5,1.2 "Swimming Pool with...

  1. "Table HC11.10 Home Appliances Usage Indicators by Northeast...

    U.S. Energy Information Administration (EIA) Indexed Site

    AppliancesTools",56.2,12.2,9.4,2.8 "Other Appliances Used" "Auto BlockEngineBattery Heater",0.8,"Q","Q","Q" "Hot Tub or Spa",6.7,1,0.8,0.2 "Swimming Pool with...

  2. "Table HC12.10 Home Appliances Usage Indicators by Midwest Census...

    U.S. Energy Information Administration (EIA) Indexed Site

    AppliancesTools",56.2,12,9,3.1 "Other Appliances Used" "Auto BlockEngineBattery Heater",0.8,0.4,"Q","Q" "Hot Tub or Spa",6.7,1.3,0.9,0.4 "Swimming Pool with...

  3. "Table HC14.10 Home Appliances Usage Indicators by West Census...

    U.S. Energy Information Administration (EIA) Indexed Site

    AppliancesTools",56.2,11.6,3.3,8.2 "Other Appliances Used" "Auto BlockEngineBattery Heater",0.8,0.2,"Q",0.1 "Hot Tub or Spa",6.7,2.2,0.6,1.7 "Swimming Pool with...

  4. Cal Poly, San Luis Obispo | University Housing Update to Appliance and Electronic Device Guidelines for Residence Halls

    E-Print Network [OSTI]

    Sze, Lawrence

    Cal Poly, San Luis Obispo | University Housing Update to Appliance and Electronic Device Guidelines guidelines. This guideline notice serves as a campus update to the Appliance and Electronic Device Community appliances and personal care devices being used in the rooms. Often these items are not energy efficient

  5. AFN Annual Convention

    Broader source: Energy.gov [DOE]

    The Alaska Federation of Natives (AFN) Convention is the largest representative annual gathering in the United States of any Native peoples. Delegates are elected on a population formula of one...

  6. Extra Crispy OvenFried Drumsticks 3 cups cornflake cereal, crushed

    E-Print Network [OSTI]

    Jawitz, James W.

    Extra Crispy OvenFried Drumsticks 3 cups cornflake cereal, crushed 1/3 cup grated Parmesan pepper sauce 8 chicken drumsticks, skinned Vegetable cooking spray 1. Combine buttermilk and hot pepper sauce in an extralarge ziptop freezer bag. Add chicken drumsticks, turning to coat. Place bag

  7. PROCESS PARAMETERS AND ENERGY USE OF GAS AND ELECTRIC OVENS IN INDUSTRIAL APPLICATIONS

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    . BACKGROUND This paper will evaluate current practices of clients in the New England/New York whichPROCESS PARAMETERS AND ENERGY USE OF GAS AND ELECTRIC OVENS IN INDUSTRIAL APPLICATIONS Dr for Energy Efficiency and Renewable Energy Department of Mechanical and Industrial Engineering University

  8. Innovative coke oven gas cleaning system for retrofit applications. Volume 1, Public design report

    SciTech Connect (OSTI)

    Not Available

    1994-05-24T23:59:59.000Z

    This Public Design Report provides, in a single document, available nonproprietary design -information for the ``Innovative Coke Oven Gas Cleaning System for Retrofit Applications`` Demonstration Project at Bethlehem Steel Corporation`s Sparrows Point, Maryland coke oven by-product facilities. This project demonstrates, for the first time in the United States, the feasibility of integrating four commercially available technologies (processes) for cleaning coke oven gas. The four technologies are: Secondary Gas Cooling, Hydrogen Sulfide and Ammonia Removal, Hydrogen Sulfide and Ammonia Recovery, and Ammonia Destruction and Sulfur Recovery. In addition to the design aspects, the history of the project and the role of the US Department of,Energy are briefly discussed. Actual plant capital and projected operating costs are also presented. An overview of the integration (retrofit) of the processes into the existing plant is presented and is followed by detailed non-proprietary descriptions of the four technologies and their overall effect on reducing the emissions of ammonia, sulfur, and other pollutants from coke oven gas. Narrative process descriptions, simplified process flow diagrams, input/output stream data, operating conditions, catalyst and chemical requirements, and utility requirements are given for each unit. Plant startup provisions, environmental considerations and control monitoring, and safety considerations are also addressed for each process.

  9. The Demand Reduction Potential of Smart Appliances in U.S. Homes

    SciTech Connect (OSTI)

    Makhmalbaf, Atefe; Srivastava, Viraj; Parker, Graham B.

    2013-08-14T23:59:59.000Z

    The widespread deployment of demand respond (DR) enabled home appliances is expected to have significant reduction in the demand of electricity during peak hours. The work documented in this paper focuses on estimating the energy shift resulting from the installation of DR enabled smart appliances in the U.S. This estimation is based on analyzing the market for smart appliances and calculating the total energy demand that can potentially be shifted by DR control in appliances. Appliance operation is examined by considering their sub components individually to identify their energy consumptions and savings resulting from interrupting and shifting their load, e.g., by delaying the refrigerator defrost cycle. In addition to major residential appliances, residential pool pumps are also included in this study given their energy consumption profiles that make them favorable for DR applications. In the market analysis study documented in this paper, the U.S. Energy Information Administration's (EIA) Residential Energy Consumption Survey (RECS) and National Association of Home Builders (NAHB) databases are used to examine the expected life of an appliance, the number of appliances installed in homes constructed in 10 year intervals after 1940 and home owner income. Conclusions about the effectiveness of the smart appliances in reducing electrical demand have been drawn and a ranking of appliances in terms of their contribution to load shift is presented. E.g., it was concluded that DR enabled water heaters result in the maximum load shift; whereas, dishwashers have the highest user elasticity and hence the highest potential for load shifting through DR. This work is part of a larger effort to bring novel home energy management concepts and technologies to reduce energy consumption, reduce peak electricity demand, integrate renewables and storage technology, and change homeowner behavior to manage and consume less energy and potentially save consumer energy costs.

  10. Efficiency of appliance models on the market before and after DOE standards

    SciTech Connect (OSTI)

    Meyers, Stephen

    2004-06-15T23:59:59.000Z

    Energy efficiency standards for appliances mandate that appliance manufacturers not manufacture or import models that have a test energy efficiency below a specified level after the standard effective date. Thus, appliance standards set a floor for energy efficiency. But do they also induce more significant changes in the efficiencies that manufacturers offer after the standard becomes effective? To address this question, we undertook an examination of before-standard and after-standard efficiency of models on the market for three products: (1) Refrigerators (1990, 1993, and 2001 standards); (2) Room air conditioners (1990 and 2000 standards); and (3) Gas furnaces (1992 standard).

  11. Coke oven doors: Historical methods of emission control and evaluation of current designs

    SciTech Connect (OSTI)

    Pettrey, J.O.; Greene, D.E. (Armco Steel Co., Middletown, OH (United States))

    1993-01-01T23:59:59.000Z

    The containment of oven door leakage has presented challenges to coke producers for many years as the requirements of environmental regulatory agencies have become increasingly stringent. A description and evaluation of past door modifications, leakage control methodologies and luting practices on Armco Steel Company, L.P.'s Ashland No. 4 Battery is detailed to provide a background for recent work, and to expand the industry's technology base. The strict door leakage standards of the 1990 amendments to the USA Clean Air Act has prompted additional technical studies. Both a joint Armco committee's evaluation of successful systems world wide and test door installations at Ashland were incorporated to determine compliance strategy. The eventual installation of Ikio Model II coke oven doors, along with modifications to ancillary equipment, has resulted in door leakage rates approaching zero. Associated methods, problems, results and evaluations are discussed.

  12. Mathematical modeling of clearance between wall of coke oven and coke cake

    SciTech Connect (OSTI)

    Nushiro, K.; Matsui, T.; Hanaoka, K.; Igawa, K.; Sorimachi, K.

    1995-12-01T23:59:59.000Z

    A mathematical model was developed for estimating the clearance between the wall of the coke oven and the coke cake. The prediction model is based on the balance between the contractile force and the coking pressure. A clearance forms when the contractile force exceeds the coking pressure in this model. The contractile force is calculated in consideration of the visco-elastic behavior of the thermal shrinkage of the coke. The coking pressure is calculated considering the generation and dispersion of gas in the melting layer. The relaxation time off coke used in this model was obtained with a dilatometer under the load application. The clearance was measured by the laser sensor, and the internal gas pressure was measured in a test oven. The clearance calculated during the coking process were in good agreement with the experimental results, which supported the validity of the mathematical model.

  13. Choosing a coke-oven gas desulfurization system: a review of current technology

    SciTech Connect (OSTI)

    Lynch, P.A.

    1982-12-01T23:59:59.000Z

    Installation of coke-oven gas desulphurizing systems is primarily the result of air pollution control regulations. Although not currently profitable, operating costs can be minimized by choosing the technology most suited to the particular application. The Stretford Holmes, Takahax/Hirohax, Koppers Vacuum Carbonate, Sulfiban and Dravo/Still processes are discussed, together with criteria for economic analysis based on technical and by-product market evaluations.

  14. Operational improvements at Jewell Coal and Coke Company`s non-recovery ovens

    SciTech Connect (OSTI)

    Ellis, C.E.; Pruitt, C.W.

    1995-12-01T23:59:59.000Z

    Operational improvements at Jewell Coal and Coke Company over the past five years includes safety and environmental concerns, product quality, equipment availability, manpower utilization, and productivity. These improvements with Jewell`s unique process has allowed Jewell Coal and Coke Company to be a consistent, high quality coke producer. The paper briefly explains Jewell`s unique ovens, their operating mode, improved process control, their maintenance management program, and their increase in productivity.

  15. Mitigating Carbon Emissions: the Potential of Improving Efficiency of Household Appliances in China

    E-Print Network [OSTI]

    Lin, Jiang

    2006-01-01T23:59:59.000Z

    in the next 20-30 years as China builds large quantity ofof power generation in China from 0.230 in 2003 to 0.164 kgHousehold Appliances in China Jiang Lin Environmental Energy

  16. Impacts of China's Current Appliance Standards and Labeling Program to 2020

    E-Print Network [OSTI]

    Fridley, David; Aden, Nathaniel; Zhou, Nan; Lin, Jiang

    2007-01-01T23:59:59.000Z

    58: Historical and Forecast China Average Household Size,P ROGRAM Impacts of Chinas Current Appliance Standards and68 Implications for Chinas Current Energy Policy and

  17. Impacts of Imported Liquefied Natural Gas on Residential Appliance Components: Literature Review

    SciTech Connect (OSTI)

    Lekov, Alex; Sturges, Andy; Wong-Parodi, Gabrielle

    2009-12-09T23:59:59.000Z

    An increasing share of natural gas supplies distributed to residential appliances in the U.S. may come from liquefied natural gas (LNG) imports. The imported gas will be of a higher Wobbe number than domestic gas, and there is concern that it could produce more pollutant emissions at the point of use. This report will review recently undertaken studies, some of which have observed substantial effects on various appliances when operated on different mixtures of imported LNG. While we will summarize findings of major studies, we will not try to characterize broad effects of LNG, but describe how different components of the appliance itself will be affected by imported LNG. This paper considers how the operation of each major component of the gas appliances may be impacted by a switch to LNG, and how this local impact may affect overall safety, performance and pollutant emissions.

  18. 0 + 0 = 1 : the appliance model of selling software bundled with hardware

    E-Print Network [OSTI]

    Hein, Bettina

    2007-01-01T23:59:59.000Z

    The business model of selling software bundled with hardware is called the appliance model. As hardware becomes less and less expensive and open source software is being offered for free, the traditional business model of ...

  19. Table HC15.10 Home Appliances Usage Indicators by Four Most...

    Gasoline and Diesel Fuel Update (EIA)

    Tools... 56.2 5.0 3.4 4.3 6.2 Other Appliances Used Auto BlockEngineBattery Heater... 0.8 Q N N N Hot Tub or Spa......

  20. "Table HC9.10 Home Appliances Usage Indicators by Climate Zone...

    U.S. Energy Information Administration (EIA) Indexed Site

    0 Home Appliances Usage Indicators by Climate Zone, 2005" " Million U.S. Housing Units" ,,"Climate Zone1" ,,"Less than 2,000 CDD and --",,,,"2,000 CDD or More and Less than 4,000...

  1. Estimation of the Energy and Capacity Savings in Texas from Appliance Efficiency Standards

    E-Print Network [OSTI]

    Verdict, M.

    1986-01-01T23:59:59.000Z

    The purpose of this presentation will be to assess the technical potential for energy and capacity savings in Texas by the year 2006 by the statewide adoption of minimum appliance efficiency standards equivalent to those recently adopted...

  2. Method of washing hydrogen sulfide from coke oven gas by the ammonium sulfide method

    SciTech Connect (OSTI)

    Ritter, H.

    1985-05-21T23:59:59.000Z

    An improved coke oven gas washing process for removing hydrogen sulfide is proposed wherein the coke oven gas is treated in a hydrogen sulfide scrubber by counterflow with an aqueous ammonia wash water. A stream of aqueous weak ammonia liquor is cooled and sprayed through nozzles in the mid-region of the hydrogen sulfide scrubber. A quantity of aqueous ammonia liquor, corresponding to the quantity which is sprayed through the said nozzles, is withdrawn from the hydrogen sulfide scrubber at a level below the nozzles and is introduced into the top of the said hydrogen sulfide scrubber. Ammonia vapor released at the nozzles has a higher partial pressure than the ammonia partial pressure of the coke oven gas in the region of the nozzle. The aqueous ammonia liquor from the deacidifier is the source of the cooled aqueous ammonia liquor which is introduced through the nozzles. A portion of the aqueous ammonia liquor from the deacidifier is introduced directly into the top of the hydrogen sulfide scrubber as a portion of the required aqueous ammonia wash water.

  3. Design and operation of the coke-oven gas sulfur removal facility at Geneva Steel

    SciTech Connect (OSTI)

    Havili, M.U.; Fraser-Smyth, L.L.; Wood, B.W. [Geneva Steel, Provo, UT (United States)

    1996-02-01T23:59:59.000Z

    The coke-oven gas sulfur removal facility at Geneva Steel utilizes a combination of two technologies which had never been used together. These two technologies had proven effective separately and now in combination. However, it brought unique operational considerations which has never been considered previously. The front end of the facility is a Sulfiban process. This monoethanolamine (MEA) process effectively absorbs hydrogen sulfide and other acid gases from coke-oven gas. The final step in sulfur removal uses a Lo-Cat II. The Lo-Cat process absorbs and subsequently oxidizes H{sub 2}S to elemental sulfur. These two processes have been effective in reducing sulfur dioxide emissions from coke-oven gas by 95%. Since the end of the start-up and optimization phase, emission rate has stayed below the 104.5 lb/hr limit of equivalent SO{sub 2} (based on a 24-hr average). In Jan. 1995, the emission rate from the sulfur removal facility averaged 86.7 lb/hr with less than 20 lb/hr from the Econobator exhaust. The challenges yet to be met are decreasing the operating expenses of the sulfur removal facility, notably chemical costs, and minimizing the impact of the heating system on unit reliability.

  4. Utilizing secondary heat to heat wash oil in the coke-oven gas desulfurization division

    SciTech Connect (OSTI)

    Volkov, E.L.

    1981-01-01T23:59:59.000Z

    Removal of hydrogen sulfide from the coke-oven gas by the vacuum-carbonate method involves significant energy costs, comprising about 47% of the total costs of the process. This is explained by the significant demand of steam for regeneration of the wash oil, the cost of which exceeds 30% of the total operating costs. The boiling point of the saturated wash oil under vacuum does not exceed 70/sup 0/C, thus the wash oil entering the regenerator can be heated either by the direct coke-oven gas or by the tar supernatant from the gas collection cycle. Utilizing the secondary heat of the direct coke-oven gas and the tar supernatant liquor (the thermal effect is approximately the same) to heat the wash oil from the gas desulfurization shops significantly improves the industrial economic indices. Heating the wash oil from gas desulfurization shops using the vacuum-carbonate method by the heat of the tar supernatant liquor may be adopted at a number of coking plants which have a scarcity of thermal resources and which have primary coolers with vertical tubes.

  5. Evaluation of advanced technologies for residential appliances and residential and commercial lighting

    SciTech Connect (OSTI)

    Turiel, I.; Atkinson, B.; Boghosian, S.; Chan, P.; Jennings, J.; Lutz, J.; McMahon, J.; Rosenquist, G.

    1995-01-01T23:59:59.000Z

    Section 127 of the Energy Policy Act requires that the Department of Energy (DOE) prepare a report to Congress on the potential for the development and commercialization of appliances that substantially exceed the present federal or state efficiency standards. Candidate high-efficiency appliances must meet several criteria including: the potential exists for substantial improvement (beyond the minimum established in law) of the appliance`s energy efficiency; electric, water, or gas utilities are prepared to support and promote the commercialization of such appliances; manufacturers are unlikely to undertake development and commercialization of such appliances on their own, or development and production would be substantially accelerated by support to manufacturers. This report describes options to improve the efficiency of residential appliances, including water heaters, clothes washers and dryers, refrigerator/freezers, dishwashers, space heating and cooling devices, as well as residential and commercial lighting products. Data from this report (particularly Appendix 1)were used to prepare the report to Congress mentioned previously. For the residential sector, national energy savings are calculated using the LBL Residential Energy Model. This model projects the number of households and appliance saturations over time. First, end-use consumption is calculated for a base case where models that only meet the standard replace existing models as these reach the end of their lifetime. Second, models with efficiencies equal to the technology under consideration replace existing models that reach the end of their lifetime. For the commercial sector, the COMMEND model was utilized to project national energy savings from new technologies. In this report, energy savings are shown for the period 1988 to 2015.

  6. Final environmental information volume for the coke oven gas cleaning project at the Bethlehem Steel Corporation Sparrows Point Plant

    SciTech Connect (OSTI)

    Not Available

    1990-04-24T23:59:59.000Z

    Bethelehem Steel Corporation (BSC) is planning to conduct a demonstration project involving an integrated system that can be retrofitted into coke oven gas handling systems to address a variety of environmental and operational factors in a more cost-effective manner. Successful application of this technology to existing US coke plants could: (1) reduce emissions of sulfur dioxide, cyanide, and volatile organic compounds (including benzene) (2) reduce the cost and handling of processing feed chemicals, (3) disposal costs of nuisance by-products and (4) increase reliability and reduce operation/maintenance requirements for coke oven gas desulfurization systems. The proposed system will remove sulfur from the coke oven gas in the form of hydrogen sulfide using the ammonia indigenous to the gas as the primary reactive chemical. Ammonia and hydrogen cyanide are also removed in this process. The hydrogen sulfide removed from the coke oven gas in routed to a modified Claus plant for conversion to a saleable sulfur by-product. Ammonia and hydrogen cyanide will be catalytically converted to hydrogen, nitrogen, carbon dioxide, and carbon monoxide. The tail gas from the sulfur recovery unit is recycled to the coke oven gas stream, upstream of the new gas cleaning system. The proposed demonstration project will be installed at the existing coke oven facilities at BSC's Sparrows Point Plant. This volume describes the proposed actions and the resulting environmental impacts. 21 refs., 19 figs., 9 tabs.

  7. Use of Residential Smart Appliances for Peak Load Shifting & Spinning Reserves: Cost Benefit Analysis

    SciTech Connect (OSTI)

    Sastry, Chellury; Pratt, Robert G.

    2010-12-01T23:59:59.000Z

    Abstract In this paper, we present the results of an analytical cost-benefit study of residential smart appliances in support of a joint stakeholder petition to the EPA and DOE to provide a 5% credit to meet ENERGY STAR eligibility criteria for products that meet the definition of a smart appliance. The underlying hypothesis is that smart appliances can play a critical role in addressing some of the challenges associated with increased electricity demand, and increased penetration of renewable sources of power. Our analytical model utilizes current annual appliance electricity consumption data, and estimates what the wholesale grid operating cost savings would be if some percentage of appliance loads were shifted away from peak hours to run during off-peak hours, and appliance loads serve power system balancing needs such as spinning reserves that would otherwise have to be provided by generators. Historical wholesale market clearing prices (location marginal and spinning reserve) from major wholesale power markets in the United States are used to estimate savings. The savings are then compared with the five percent credit, to determine if the savings in grid operating costs (benefits) are at least as high as the credit (cost) if not higher.

  8. Conventional Hydropower Technologies (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2011-07-01T23:59:59.000Z

    This fact sheet describes the DOE Water Power Program's conventional hydropower research and development efforts.

  9. Comment submitted by the Association of Home Appliance Manufacturers (AHAM) regarding the Energy Star Verification Testing Program

    Broader source: Energy.gov [DOE]

    This document is a comment submitted by the Association of Home Appliance Manufacturers (AHAM) regarding the Energy Star Verification Testing Program

  10. What can we learn from high-frequency appliance-level energy metering? Results from a field experiment

    E-Print Network [OSTI]

    Chen, VL; Delmas, MA; Kaiser, WJ; Locke, SL

    2015-01-01T23:59:59.000Z

    Newborough, M. , 2003. Dynamic energy-consumption indicatorsbehaviour and design. Energy Build. 35 (8), Please cite thisfrequency appliance-level energy metering? Results from a ?

  11. Reduction of NO[sub x] emissions coke oven gas combustion process

    SciTech Connect (OSTI)

    Terza, R.R. (USS Clairton Works, PA (United States)); Sardesai, U.V. (Westfield Engineering and Services, Inc., Houston, TX (United States))

    1993-01-01T23:59:59.000Z

    The paper describes by-product processing at Clairton Works which uses a unique cryogenic technology. Modifications to the desulfurization facility, nitrogen oxide formation in combustion processes (both thermal and fuel NO[sub x]), and the boilers plants are described. Boilers were used to study the contribution of fuel NO[sub x] formation during the combustion of coke oven gas. Results are summarized. The modifications made to the desulfurization facility resulted in the overall H[sub 2]S emission being reduced by 2-4 grains/100scf and the NO[sub x] emission being reduced by 21-42% in the boiler stacks.

  12. Coke oven gas treatment and by-product plant of Magnitogorsk Integrated Iron and Steel Works

    SciTech Connect (OSTI)

    Egorov, V.N.; Anikin, G.J. [Magnitogorsk Integrated Iron and Steel Works, (Russian Federation); Gross, M. [Krupp Koppers GmbH, Essen (Germany)

    1995-12-01T23:59:59.000Z

    Magnitogorsk Integrated Iron and Steel Works, Russia, decided to erect a new coke oven gas treatment and by-product plant to replace the existing obsolete units and to improve the environmental conditions of the area. The paper deals with the technological concept and the design requirements. Commissioning is scheduled at the beginning of 1996. The paper describes H{sub 2}S and NH{sub 3} removal, sulfur recovery and ammonia destruction, primary gas cooling and electrostatic tar precipitation, and the distributed control system that will be installed.

  13. NCAI 71st Annual Convention

    Broader source: Energy.gov [DOE]

    Save the date for the National Congress of American Indians (NCAI) 71st Annual Convention at the Hyatt Regency Atlanta.

  14. ATNI Mid-year Convention

    Broader source: Energy.gov [DOE]

    The Affiliated Tribes of Northwest Indians Mid-year Convention will be hosted by the Chehalis Tribe.

  15. Audio Engineering Society Convention Paper

    E-Print Network [OSTI]

    Ferri, Massimo

    drops [3], on objects. It consists of conventional eyeglasses linked to a comfortable-to-carry palmtop

  16. Material World: Forecasting Household Appliance Ownership in a Growing Global Economy

    SciTech Connect (OSTI)

    Letschert, Virginie; McNeil, Michael A.

    2009-03-23T23:59:59.000Z

    Over the past years the Lawrence Berkeley National Laboratory (LBNL) has developed an econometric model that predicts appliance ownership at the household level based on macroeconomic variables such as household income (corrected for purchase power parity), electrification, urbanization and climate variables. Hundreds of data points from around the world were collected in order to understand trends in acquisition of new appliances by households, especially in developing countries. The appliances covered by this model are refrigerators, lighting fixtures, air conditioners, washing machines and televisions. The approach followed allows the modeler to construct a bottom-up analysis based at the end use and the household level. It captures the appliance uptake and the saturation effect which will affect the energy demand growth in the residential sector. With this approach, the modeler can also account for stock changes in technology and efficiency as a function of time. This serves two important functions with regard to evaluation of the impact of energy efficiency policies. First, it provides insight into which end uses will be responsible for the largest share of demand growth, and therefore should be policy priorities. Second, it provides a characterization of the rate at which policies affecting new equipment penetrate the appliance stock. Over the past 3 years, this method has been used to support the development of energy demand forecasts at the country, region or global level.

  17. Recovery and separation of high-value plastics from discarded household appliances

    SciTech Connect (OSTI)

    Karvelas, D.E.; Jody, B.J.; Poykala, J.A. Jr.; Daniels, E.J. [Argonne National Lab., IL (United States). Energy Systems Div.; Arman, B. [Argonne National Lab., IL (United States). Energy Systems Div.]|[Praxair, Inc., Tarrytown, NY (United States)

    1996-03-01T23:59:59.000Z

    Argonne National Laboratory is conducting research to develop a cost- effective and environmentally acceptable process for the separation of high-value plastics from discarded household appliances. The process under development has separated individual high purity (greater than 99.5%) acrylonitrile-butadiene-styrene (ABS) and high- impact polystyrene (HIPS) from commingled plastics generated by appliance-shredding and metal-recovery operations. The process consists of size-reduction steps for the commingled plastics, followed by a series of gravity-separation techniques to separate plastic materials of different densities. Individual plastics of similar densities, such as ABS and HIPS, are further separated by using a chemical solution. By controlling the surface tension, the density, and the temperature of the chemical solution we are able to selectively float/separate plastics that have different surface energies. This separation technique has proven to be highly effective in recovering high-purity plastics materials from discarded household appliances. A conceptual design of a continuous process to recover high-value plastics from discarded appliances is also discussed. In addition to plastics separation research, Argonne National Laboratory is conducting research to develop cost-effective techniques for improving the mechanical properties of plastics recovered from appliances.

  18. Supervised start system for microprocessor based appliance controls

    SciTech Connect (OSTI)

    Fowler, D.L.; Kadwell, B.J.

    1986-12-09T23:59:59.000Z

    A supervisory start system is described for an appliance control that includes a microprocessor, manually actuatable keyboard switch means, and first and second relay means; the microprocessor including first, second and third input means and first, second and third output means and being conditioned to generate control signals at the output means upon receipt of electrical signals at the input means; the supervisory start circuit comprising, in combination, first, second and third transistors each having a base, an emitter and a collector. The first transistor means controls energization of the first relay means and is controlled by the manually actuatable switch means; the manually actuatable switch means being electrically connected to the first output means of the microprocessor and the base of the first transistor; the base of the second transistor being connected to the second output means of the microprocessor, the emitter of the second transistor being connected to a source of potential, the collector of the second transistor being connected to the emitter of the first transistor; the collector of the first transistor being connected to the first relay means; the second transistor being operable to connect the emitter of the first transistor to the source of potential when a signal from the second output means of the microprocessor is applied to the base of the second transistor; the microprocessor being conditioned to emit a signal at the second output means upon receipt of a signal at the first input means; means for latching the first transistor in a conducting condition upon being energized; and means for applying an electrical signal to the second input means when the first transistor means is in a conducting condition.

  19. Health-hazard evaluation report No. HETA-88-377-2120, Armco Coke Oven, Ashland Kentucky

    SciTech Connect (OSTI)

    Kinnes, G.M.; Fleeger, A.K.; Baron, S.L.

    1991-06-01T23:59:59.000Z

    In response to a request from the Oil, Chemical and Atomic Workers International Union, a study was made of possible hazardous working conditions at ARMCO Coke Oven (SIC-3312), Ashland, Kentucky. The facility produces about 1,000,000 tons of coke annually. Of the approximately 400 total employees at the coke oven site, 55 work in the by products area. Air quality sampling results indicated overexposure to both benzene (71432) and coal tar pitch volatiles (CTPVs). Airborne levels of benzene ranged as high as 117 parts per million (ppm) with three of 17 samples being above the OSHA limit of 1ppm. Airborne concentrations of CTPVs ranged as high as 0.38mg/cu m with two of six readings being above OSHA limit of 0.2mg/cu m. Several polynuclear aromatic hydrocarbons were also detected. The authors conclude that by products area workers are potentially overexposed to carcinogens, including benzene, CTPVs, and polynuclear aromatic hydrocarbons. An epidemiologic study is considered unlikely to yield meaningful information at this time, due to the small number of workers and the short follow up period. The authors recommend specific measures for reducing potential employee exposures, including an environmental sampling program, a preventive maintenance program, improved housekeeping procedures, and reducing exposure in operators' booths.

  20. Abstract-In this paper we evaluate the energy and economic consequences of appliance remanufacturing relative to purchasing

    E-Print Network [OSTI]

    Gutowski, Timothy

    Abstract- In this paper we evaluate the energy and economic consequences of appliance that economic incentives can be an influential driver for consumers to remanufacture and re-use old appliances washer. There is considerable amount of literature regarding policy, economics, and efficiency impacts

  1. Building Storage Appliances for the Grid and Beyond John Bent, Andrea Arpaci-Dusseau, Remzi Arpaci-Dusseau, Miron Livny

    E-Print Network [OSTI]

    Wisconsin at Madison, University of

    Building Storage Appliances for the Grid and Beyond John Bent, Andrea Arpaci-Dusseau, Remzi Arpaci,dusseau,remzi,miron@cs.wisc.edu Abstract Current storage appliances have been traditionally de- signed to meet either the storage demands challenges to storage ap- pliances that would be used on the grid. NeST is a user-level software-only storage

  2. Building Storage Appliances for the Grid and Beyond John Bent, Andrea ArpaciDusseau, Remzi ArpaciDusseau, Miron Livny

    E-Print Network [OSTI]

    Wisconsin at Madison, University of

    Building Storage Appliances for the Grid and Beyond John Bent, Andrea ArpaciDusseau, Remzi Arpaci,dusseau,remzi,miron@cs.wisc.edu Abstract Current storage appliances have been traditionally de signed to meet either the storage demands challenges to storage ap pliances that would be used on the grid. NeST is a userlevel softwareonly storage

  3. Mitigating Carbon Emissions: the Potential of Improving Efficiencyof Household Appliances in China

    SciTech Connect (OSTI)

    Lin, Jiang

    2006-07-10T23:59:59.000Z

    China is already the second's largest energy consumer in the world after the United States, and its demand for energy is expected to continue to grow rapidly in the foreseeable future, due to its fast economic growth and its low level of energy use per capita. From 2001 to 2005, the growth rate of energy consumption in China has exceeded the growth rate of its economy (NBS, 2006), raising serious concerns about the consequences of such energy use on local environment and global climate. It is widely expected that China is likely to overtake the US in energy consumption and greenhouse gas (GHG) emissions during the first half of the 21st century. Therefore, there is considerable interest in the international community in searching for options that may help China slow down its growth in energy consumption and GHG emissions through improving energy efficiency and adopting more environmentally friendly fuel supplies such as renewable energy. This study examines the energy saving potential of three major residential energy end uses: household refrigeration, air-conditioning, and water heating. China is already the largest consumer market in the world for household appliances, and increasingly the global production base for consumer appliances. Sales of household refrigerators, room air-conditioners, and water heaters are growing rapidly due to rising incomes and booming housing market. At the same time, the energy use of Chinese appliances is relatively inefficient compared to similar products in the developed economies. Therefore, the potential for energy savings through improving appliance efficiency is substantial. This study focuses particularly on the impact of more stringent energy efficiency standards for household appliances, given that such policies are found to be very effective in improving the efficiency of household appliances, and are well established both in China and around world (CLASP, 2006).

  4. Modeling of GE Appliances in GridLAB-D: Peak Demand Reduction

    SciTech Connect (OSTI)

    Fuller, Jason C.; Vyakaranam, Bharat GNVSR; Prakash Kumar, Nirupama; Leistritz, Sean M.; Parker, Graham B.

    2012-04-29T23:59:59.000Z

    The widespread adoption of demand response enabled appliances and thermostats can result in significant reduction to peak electrical demand and provide potential grid stabilization benefits. GE has developed a line of appliances that will have the capability of offering several levels of demand reduction actions based on information from the utility grid, often in the form of price. However due to a number of factors, including the number of demand response enabled appliances available at any given time, the reduction of diversity factor due to the synchronizing control signal, and the percentage of consumers who may override the utility signal, it can be difficult to predict the aggregate response of a large number of residences. The effects of these behaviors can be modeled and simulated in open-source software, GridLAB-D, including evaluation of appliance controls, improvement to current algorithms, and development of aggregate control methodologies. This report is the first in a series of three reports describing the potential of GE's demand response enabled appliances to provide benefits to the utility grid. The first report will describe the modeling methodology used to represent the GE appliances in the GridLAB-D simulation environment and the estimated potential for peak demand reduction at various deployment levels. The second and third reports will explore the potential of aggregated group actions to positively impact grid stability, including frequency and voltage regulation and spinning reserves, and the impacts on distribution feeder voltage regulation, including mitigation of fluctuations caused by high penetration of photovoltaic distributed generation and the effects on volt-var control schemes.

  5. March 1980 / Vol. 5, No. 3 / OPTICS LETTERS 117 Disk-shaped heat-pipe oven used for lithium excited-state

    E-Print Network [OSTI]

    Stroud, Carlos R.

    March 1980 / Vol. 5, No. 3 / OPTICS LETTERS 117 Disk-shaped heat-pipe oven used for lithium excited success- fully operated using both sodium and lithium as the working fluid. The lithium 4s 2 S 112 and 5s whosepressure is easily measured externally, the heat-pipe oven isolates the often corrosive vapor from windows

  6. Conventional Hydropower Technologies (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2010-07-01T23:59:59.000Z

    The US Department of Energy conducts research on conventional hydropower technologies to increase generation and improve existing means of generating hydroelectricity.

  7. Tanana Chiefs Conference Annual Convention

    Broader source: Energy.gov [DOE]

    The Tanana Chiefs Conference is holding its annual convention to discuss issues in the region, hold elections, and adopt resolutions presented by Tribes.

  8. Abstract--The paper reviews solutions being explored to face the supply problems faced in the Chilean electricity market oven

    E-Print Network [OSTI]

    Catholic University of Chile (Universidad Catlica de Chile)

    and transportation of natural gas. Private investors were strongly behind the process, and invested heavily in the Chilean electricity market oven recent years, given unexpected restrictions in natural gas transfers from Argentina. Investment in generation came to a stall, given uncertainties in natural gas supply and the risk

  9. Electrical Appliances Students may use clocks, sound equipment, computers, electric razors, hair dryers,

    E-Print Network [OSTI]

    Aalberts, Daniel P.

    with a heating coil *Torchiere type lamps with a halogen bulb, and other lamps with a halogen bulb greater than there is specific UL approval for a higher wattage. Violators of any of the above policies will be charged $50, Prohibited Appliances, and Halogen Torchiere Lamps 1st offense: $50.00 fine and the student will be called

  10. Tracking States of Massive Electrical Appliances by Lightweight Metering and Sequence Decoding

    E-Print Network [OSTI]

    Wang, Yongcai

    to track the on/off states of N appliances by deploying only m smart meters on the power load tree, where m demonstrate some interesting structures of the problem. Keywords Energy auditing, Smart meter, Deployment smart meter networks, and thus suffer from the high deploy- ment, maintenance and data collection costs

  11. T-531: The WebVPN implementation on Cisco Adaptive Security Appliances (ASA) 5500

    Broader source: Energy.gov [DOE]

    The WebVPN implementation on Cisco Adaptive Security Appliances (ASA) 5500 series devices with software before 8.2(3) permits the viewing of CIFS shares even when CIFS file browsing has been disabled, which allows remote authenticated users to bypass intended access restrictions via CIFS requests, aka Bug ID CSCsz80777.

  12. Less Watts, More Performance: An Intelligent Storage Engine for Data Appliances

    E-Print Network [OSTI]

    Teubner, Jens

    how Ibex reduces data movement, CPU usage, and overall energy consumption in database appliances27, 2013, New York, New York, USA. Copyright 2013 ACM 978-1-4503-2037-5/13/06 ...$10.00. MySQL Server M y- proves performance and also reduces energy consumption. Query processing in relational databases may

  13. @scale: Insights from a Large, Long-Lived Appliance Stephen Dawson-Haggerty

    E-Print Network [OSTI]

    Culler, David E.

    Design, Measurement, Performance Keywords Energy, Audit, Building, Power, Wireless, Sensor Network 1@scale: Insights from a Large, Long-Lived Appliance Energy WSN Stephen Dawson-Haggerty , Steven Lanzisera , Jay Taneja , Richard Brown , and David Culler Computer Science Division Environmental Energy

  14. Design Techniques for Sensor Appliances: Foundations and Light Compass Case Study

    E-Print Network [OSTI]

    Potkonjak, Miodrag

    sensors of the appliance, and (2) error minimization-based sensor data interpretation middleware. We have University of California, Los Angeles jwong@cs.ucla.edu Seapahn Megerian University of California, Los Angeles seapahn@cs.ucla.edu Miodrag Potkonjak University of California, Los Angeles miodrag

  15. Energy-Harvesting Thermoelectric Sensing for Unobtrusive Water and Appliance Metering

    E-Print Network [OSTI]

    Dutta, Prabal

    Energy-Harvesting Thermoelectric Sensing for Unobtrusive Water and Appliance Metering Bradford that meters using the same thermoelectric generator with which it powers itself. In short, the rate at which be harvested with a thermoelectric generator (TEG) to power a sensor node. TEGs utilize the Seebeck effect

  16. Energy and CO2 efficient scheduling of smart appliances in active houses equipped with batteries

    E-Print Network [OSTI]

    Johansson, Karl Henrik

    Energy and CO2 efficient scheduling of smart appliances in active houses equipped with batteries the electricity bill and the CO2 emissions. Mathematically, the scheduling problem is posed as a multi that the new formulation can decrease both the CO2 emissions and the electricity bill. Furthermore, a survey

  17. A Texas Study of the Effects of the National Appliance Energy Conservation Act of 1987

    E-Print Network [OSTI]

    Bachmeier, R.

    1987-01-01T23:59:59.000Z

    on the amount of energy which can be consumed by major new household appliances. The efficiency standards mandated by the NAECA will be phased in between 1988 and 1993 and will focus on space heating equipment, air conditioners, water heaters, refrigerators...

  18. Impact of domestic woodburning appliances on indoor air quality Corinne Mandin1

    E-Print Network [OSTI]

    Boyer, Edmond

    air pollution study (CITEPA), France * Corresponding email: Eva.Leoz@ineris.fr SUMMARY Data pollutants in ambient air. Consequently our study aims at describing both emission factors and inerisImpact of domestic woodburning appliances on indoor air quality Corinne Mandin1 , Jacques Ribron2

  19. "Table HC13.10 Home Appliances Usage Indicators by South Census...

    U.S. Energy Information Administration (EIA) Indexed Site

    Tools",56.2,20.5,10.8,3.6,6.1 "Other Appliances Used" "Auto BlockEngineBattery Heater",0.8,"N","N","N","N" "Hot Tub or Spa",6.7,2.1,1.2,0.2,0.7 "Swimming Pool with...

  20. "Table HC4.10 Home Appliances Usage Indicators by Renter-Occupied...

    U.S. Energy Information Administration (EIA) Indexed Site

    Tools",56.2,23.6,4.4,2.4,4.6,11.3,0.8 "Other Appliances Used" "Auto BlockEngineBattery Heater",0.8,"Q","Q","Q","Q","N","N" "Hot Tub or Spa",6.7,"Q","Q","Q","N","N","Q" "Swimming...

  1. "Table HC3.10 Home Appliances Usage Indicators by Owner-Occupied...

    U.S. Energy Information Administration (EIA) Indexed Site

    Tools",56.2,32.6,25,2.2,1.1,1.5,2.8 "Other Appliances Used" "Auto BlockEngineBattery Heater",0.8,0.7,0.7,"N","Q","N","Q" "Hot Tub or Spa",6.7,6.5,6.2,"Q","N","N","Q" "Swimming...

  2. "Table HC8.10 Home Appliances Usage Indicators by Urban/Rural...

    U.S. Energy Information Administration (EIA) Indexed Site

    Tools",56.2,27.2,10.6,9.3,9.2 "Other Appliances Used" "Auto BlockEngineBattery Heater",0.8,"Q","Q","Q",0.4 "Hot Tub or Spa",6.7,1.7,1.2,2.2,1.6 "Swimming Pool with...

  3. Table HC6.10 Home Appliances Usage Indicators by Number of Household...

    Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

    Tools..... 56.2 20.1 14.4 8.6 6.9 6.2 Other Appliances Used Auto BlockEngineBattery Heater... 0.8 Q 0.4 Q Q Q Hot Tub or Spa......

  4. "Table HC10.10 Home Appliances Usage Indicators by U.S. Census...

    U.S. Energy Information Administration (EIA) Indexed Site

    Tools",56.2,12.2,12,20.5,11.6 "Other Appliances Used" "Auto BlockEngineBattery Heater",0.8,"Q",0.4,"N",0.2 "Hot Tub or Spa",6.7,1,1.3,2.1,2.2 "Swimming Pool with...

  5. Measure Guideline: Combustion Safety for Natural Draft Appliances Using Indoor Air

    SciTech Connect (OSTI)

    Brand, L.

    2014-04-01T23:59:59.000Z

    This measure guideline covers how to assess and carry out the combustion safety procedures for appliances and heating equipment that uses indoor air for combustion in low-rise residential buildings. Only appliances installed in the living space, or in an area freely communicating with the living space, vented alone or in tandem with another appliance are considered here. A separate measure guideline addresses combustion appliances located either within the living space in enclosed closets or side rooms or outside the living space in an adjacent area like an attic or garage that use outdoor air for combustion. This document is for inspectors, auditors, and technicians working in homes where energy upgrades are being conducted whether or not air infiltration control is included in the package of measures being applied. In the indoor combustion air case, guidelines summarized here are based on language provided in several of the codes to establish minimum requirements for the space using simplified prescriptive measures. In addition, building performance testing procedures are provided by testing agencies. The codes in combination with the test procedures offer comprehensive combustion safety coverage to address safety concerns, allowing inexperienced residential energy retrofit inspectors to effectively address combustion safety issues and allow energy retrofits to proceed.

  6. An Appliance-driven Approach to Detection of Corrupted Load Curve Data

    E-Print Network [OSTI]

    Pei, Jian

    An Appliance-driven Approach to Detection of Corrupted Load Curve Data Guoming Tang1,3 , Kui Wu1@sfu.ca, jiuyang_tang@nudt.edu.cn, jshlei@shiep.edu.cn ABSTRACT Load curve data in power systems refers to users discov- ered in the data. Load curve data, however, usually suffers from corruptions caused by various

  7. A Communication-Based Appliance Scheduling Scheme for Consumer-Premise Energy Management Systems

    E-Print Network [OSTI]

    Snyder, Larry

    of electricity prices and distributed wind power uncertainty. We model the evolution of the protocol as a two is an energy management controller that incorporates prices and user preferences to providA Communication-Based Appliance Scheduling Scheme for Consumer-Premise Energy Management Systems

  8. 2014-06-06 Appliance Standards and Rulemaking Federal Advisory Committee; Preliminary Agenda

    Broader source: Energy.gov [DOE]

    This document is a preliminary agenda for the Appliance Standards and Rulemaking Federal Advisory Committee open meeting being held on June 6, 2014 from 1:00 p.m.-5:00 p.m. (EST) at the U.S. Department of Energy, Forrestal Building, Room 8E-089, 1000 Independence Avenue SW., Washington, DC 20585.

  9. Experience from Building Industry Strength Agent-Based Appliances Leon Sterling

    E-Print Network [OSTI]

    Taveter, Kuldar

    Experience from Building Industry Strength Agent-Based Appliances Leon Sterling The University of Melbourne Department of Computer Science and Software Engineering Victoria, 3010, Australia leon@cs.mu.oz.au Kuldar Taveter The University of Melbourne Department of Computer Science and Software Engineering

  10. Standby and off-mode power demand of new appliances in the Anbal de Almeida

    E-Print Network [OSTI]

    Paris-Sud XI, Universit de

    Standby and off-mode power demand of new appliances in the market Anbal de Almeida ISR regulation to limit the standby and off-mode power consumption of non-networked household electronic involved in the project. Standby and off-mode values by product categories are analyzed and compared

  11. Grass roots technology and energy policy: Solar ovens and wind turbines in Kenya

    SciTech Connect (OSTI)

    Kammen, D.M. [Harvard Univ., Cambridge, MA (United States). Dept. of Physics

    1992-12-31T23:59:59.000Z

    Kenya is said to be an ideal site for projects that promote renewable energy sources since it devotes over forty percent of its GNP to the purchase of imported coal and oil. The author presents a chronology of solar oven projects in Kenya and suggests that success of the program will be measured by the number of people who move on to wind turbine use. He discusses the role of renewable energy technology in reducing greenhouse gases and closes by recommending that industrialized nations that produce large amounts of carbon dioxide provide aid to develop projects that reduce carbon dioxide elsewhere in the world. At the same time they would receive credit towards their carbon dioxide quotas.

  12. Summing up of discussion on improvement trends in coke-oven gas purification flowsheets

    SciTech Connect (OSTI)

    Zemblevskii, K.K.

    1983-01-01T23:59:59.000Z

    Reference is made to a previously published article that included flowsheets for purification of coke-oven gas. It is concluded that the flowsheets for a process using arsenic-soda and vacuum-carbonate methods of sulfur removal in which the gas is cooled to 303-308/sup 0/K are seriously in error. Schemes involving minor refrigeration, sulfur removal by the circulating ammonia method and ammonia recovery as ammonia liquor are seen as promising but in need of further improvement. One scheme discussed (the VUKhIN scheme) involves ammonia recovery by the circulating phosphate method and sulfur removal by the circulating ammonia method is seen as a replacement for the minor refrigeration method. Since liquid ammonia consumption in agriculture is continually increasing, schemes that result in production of liquid ammonia rather than ammonia liquor should be seriously considered.

  13. Method of recovering sulfur from the hydrogen sulfide contained in coke oven gases

    SciTech Connect (OSTI)

    Laufhutte, D.

    1985-04-30T23:59:59.000Z

    Ammonia and hydrogen sulfide are washed out of the coke oven gas and stripped from the wash liquor in the form of gases and fumes or vapors. The ammonia is decomposed in a nickel catalyzer and a small part of the decomposition gases is supplied directly to a combustion furnace, while the larger part of the combustion gases is first cooled and freed from condensate, and only then supplied to the combustion furnace. In the combustion furnace, the proportion of H/sub 2/S/SO/sub 2/ needed for the Claus process is adjusted by a partial combustion of the decomposition gases. The gases from the combustion furnace are then processed in the Claus plant to sulfur.

  14. A mathematical model for the estimation of flue temperature in a coke oven

    SciTech Connect (OSTI)

    Choi, K.I.; Kim, S.Y.; Suo, J.S.; Hur, N.S.; Kang, I.S.; Lee, W.J.

    1997-12-31T23:59:59.000Z

    The coke plants at the Kwangyang works has adopted an Automatic Battery Control (ABC) system which consists of four main parts, battery heating control, underfiring heat and waste gas oxygen control, pushing and charging schedule and Autotherm-S that measures heating wall temperature during pushing. The measured heating wall temperature is used for calculating Mean Battery Temperature (MBT) which is average temperature of flues for a battery, but the Autotherm-S system can not provide the flue temperatures of an oven. This work attempted to develop mathematical models for the estimation of the flue temperature using the measured heating wall temperature and to examine fitness of the mathematical model for the coke plant operation by analysis of raw gas temperature at the stand pipe. Through this work it is possible to reflect heating wall temperature in calculating MBT for battery heating control without the interruption caused by a maintenance break.

  15. Indian Gaming 2013 Tradeshow & Convention

    Broader source: Energy.gov [DOE]

    The National Indian Gaming Association will host its annual tradeshow and convention on March 24-27 in Phoenix, Arizona. Be sure to visit the DOE Office of Indian Energy booth at the event.

  16. NAIHC Convention and Trade Show

    Broader source: Energy.gov [DOE]

    The National American Indian Housing Council's (NAIHC)most longstanding Annual Event, the 39th Annual NAIHC Convention and Trade Show is an opportunity to learn about tribal housing, attend...

  17. ITCN 49th Annual Convention

    Broader source: Energy.gov [DOE]

    The Inter-Tribal Council of Nevada, Inc. will be hosting its 49th Annual Convention, themed "Making a Difference for Nevada Tribes," December 8-11, 2014 at John Ascuagas Nugget in Sparks, Nevada.

  18. Mitigating Carbon Emissions: the Potential of Improving Efficiency of Household Appliances in China

    E-Print Network [OSTI]

    Lin, Jiang

    2006-01-01T23:59:59.000Z

    due to conventional gas combustion technologies (Figure E-due to conventional gas combustion technologies. heat-pump

  19. July 11 Public Meeting: Physical Characterization of Grid-Connected Commercial And Residential Building End-Use Equipment And Appliances

    Broader source: Energy.gov [DOE]

    These documents contain the three slide decks presented at the public meeting on the Physical Characterization of Grid-Connected Commercial and Residential Buildings End-Use Equipment and Appliances, held on July 11, 2014 in Washington, DC.

  20. Use of Residential Smart Appliances for Peak-Load Shifting and Spinning Reserves Cost/Benefit Analysis

    SciTech Connect (OSTI)

    Sastry, Chellury; Pratt, Robert G.; Srivastava, Viraj; Li, Shun

    2010-12-01T23:59:59.000Z

    In this report, we present the results of an analytical cost/benefit study of residential smart appliances from a utility/grid perspective in support of a joint stakeholder petition to the ENERGY STAR program within the Environmental Protection Agency (EPA) and Department of Energy (DOE). The goal of the petition is in part to provide appliance manufacturers incentives to hasten the production of smart appliances. The underlying hypothesis is that smart appliances can play a critical role in addressing some of the societal challenges, such as anthropogenic global warming, associated with increased electricity demand, and facilitate increased penetration of renewable sources of power. The appliances we consider include refrigerator/freezers, clothes washers, clothes dryers, room air-conditioners, and dishwashers. The petition requests the recognition that providing an appliance with smart grid capability, i.e., products that meet the definition of a smart appliance, is at least equivalent to a corresponding five percent in operational machine efficiencies. It is then expected that given sufficient incentives and value propositions, and suitable automation capabilities built into smart appliances, residential consumers will be adopting these smart appliances and will be willing participants in addressing the aforementioned societal challenges by more effectively managing their home electricity consumption. The analytical model we utilize in our cost/benefit analysis consists of a set of user-definable assumptions such as the definition of on-peak (hours of day, days of week, months of year), the expected percentage of normal consumer electricity consumption (also referred to as appliance loads) that can shifted from peak hours to off-peak hours, the average power rating of each appliance, etc. Based on these assumptions, we then formulate what the wholesale grid operating-cost savings, or benefits, would be if the smart capabilities of appliances were invoked, and some percentage of appliance loads were shifted away from peak hours to run during off-peak hours, and appliance loads served power-system balancing needs such as spinning reserves that would otherwise have to be provided by generators. The rationale is that appliance loads can be curtailed for about ten minutes or less in response to a grid contingency without any diminution in the quality of service to the consumer. We then estimate the wholesale grid operating-cost savings based on historical wholesale-market clearing prices (location marginal and spinning reserve) from major wholesale power markets in the United States. The savings derived from the smart grid capabilities of an appliance are then compared to the savings derived from a five percent increase in traditional operational machine efficiencies, referred to as cost in this report, to determine whether the savings in grid operating costs (benefits) are at least as high as or higher than the operational machine efficiency credit (cost).

  1. Innovative coke oven gas cleaning system for retrofit applications. Environmental Monitoring program. Volume 1 - sampling progrom report. Baseline Sampling Program report

    SciTech Connect (OSTI)

    Stuart, L.M.

    1994-05-27T23:59:59.000Z

    Bethlehem Steel Corporation (BSC), in conjunction with the Department of Energy (DOE) is conducting a Clean Coal Technology (CCT) project at its Sparrows Point, Maryland Coke Oven Plant. This innovative coke oven gas cleaning system combines several existing technologies into an integrated system for removing impurities from Coke Oven Gas (COG) to make it an acceptable fuel. DOE provided cost-sharing under a Cooperative Agreement with BSC. This Cooperative Agreement requires BSC to develop and conduct and Environmental Monitoring Plan for the Clean Coal Technology project and to report the status of the EMP on a quarterly basis. It also requires the preparation of a final report on the results of the Baseline Compliance and Supplemental Sampling Programs that are part of the EMP and which were conducted prior to the startup of the innovative coke oven gas cleaning system. This report is the Baseline Sampling Program report.

  2. SOLOX coke-oven gas desulfurization ppm levels -- No toxic waste

    SciTech Connect (OSTI)

    Platts, M. (Thyssen Still Otto Technical Services, Pittsburgh, PA (United States)); Tippmer, K. (Thyssen Still Otto Anlagentechnik GmbH, Bochum (Germany))

    1994-09-01T23:59:59.000Z

    For sulfur removal from coke-oven gas, the reduction/oxidation processes such as Stretford are the most effective, capable of removing the H[sub 2]S down to ppm levels. However, these processes have, in the past, suffered from ecological problems with secondary pollutant formation resulting from side reactions with HCN and O[sub 2]. The SOLOX gas desulfurization system is a development of the Stretford process in which the toxic effluent problems are eliminated by installing a salt decomposition process operating according to the liquid-phase hydrolysis principle. In this process, the gaseous hydrolysis products H[sub 2]S, NH[sub 3] and CO[sub 2] are returned to the untreated gas, and the regenerated solution is recycled to the absorption process. The blowdown from the absorption circuit is fed into a tube reactor where the hydrolysis process takes place. The toxic salts react with water, producing as reaction products the gases H[sub 2]S, NH[sub 3] and CO[sub 2], and the nontoxic salt Na[sub 2]SO[sub 4]. From the hydrolysis reactor the liquid stream flows into a fractionating crystallization plant. This plant produces a recycle stream of regenerated absorption solution and a second stream containing most of the Na[sub 2]SO[sub 4]. This second stream comprises the net plant waste and can be disposed of with the excess ammonia liquor or sprayed onto the coal.

  3. New analysis techniques for estimating impacts of federal appliance efficiency standards

    SciTech Connect (OSTI)

    McMahon, James E.

    2003-06-24T23:59:59.000Z

    Impacts of U.S. appliance and equipment standards have been described previously. Since 2000, the U.S. Department of Energy (DOE) has updated standards for clothes washers, water heaters, and residential central air conditioners and heat pumps. A revised estimate of the aggregate impacts of all the residential appliance standards in the United States shows that existing standards will reduce residential primary energy consumption and associated carbon dioxide (CO{sub 2}) emissions by 89 percent in 2020 compared to the levels expected without any standards. Studies of possible new standards are underway for residential furnaces and boilers, as well as a number of products in the commercial (tertiary) sector, such as distribution transformers and unitary air conditioners. The analysis of standards has evolved in response to critiques and in an attempt to develop more precise estimates of costs and benefits of these regulations. The newer analysis elements include: (1) valuing energy savings by using marginal (rather than average) energy prices specific to an end-use; (2) simulating the impacts of energy efficiency increases over a sample population of consumers to quantify the proportion of households having net benefits or net costs over the life of the appliance; and (3) calculating marginal markups in distribution channels to derive the incremental change in retail prices associated with increased manufacturing costs for improving energy efficiency.

  4. Experience and results of new heating control system of coke oven batteries at Rautaruukki Oy Raahe Steel

    SciTech Connect (OSTI)

    Swanljung, J.; Palmu, P. [Rautaruukki Oy Raahe Steel (Finland)

    1997-12-31T23:59:59.000Z

    The latest development and results of the heating control system at Raahe Steel are presented in this paper. From the beginning of coke production in Rautaruukki Oy Raahe Steel (October 1987) the heating control systems have been developed. During the first stage of development work at the coking plant (from year 1987 to 1992), when only the first coke oven battery consisting of 35 ovens was in production, the main progress was in the field of process monitoring. After commissioning of the second stage of the coking plant (November 1992), the development of the new heating control model was started. Target of the project was to develop a dynamic control system which guides the heating of batteries through the various process conditions. Development work took three years and the heating control system was commissioned in the year 1995. Principle of the second generation system is an energy balance calculation, coke end temperature determination and dynamic oven scheduling system. The control is based on simultaneous feedforward and feedback control. The fuzzy logic components were added after about one year experience.

  5. Conventional and Non-Conventional Nuclear Material Signatures

    SciTech Connect (OSTI)

    Gozani, Tsahi [Rapiscan Laboratories, Inc., 520 Almanor Ave., Sunnyvale, CA 94085 (United States)

    2009-03-10T23:59:59.000Z

    The detection and interdiction of concealed special nuclear material (SNM) in all modes of transport is one of the most critical security issues facing the United States and the rest of the world. In principle, detection of nuclear materials is relatively easy because of their unique properties: all of them are radioactive and all emit some characteristic gamma rays. A few emit neutrons as well. These signatures are the basis for passive non-intrusive detection of nuclear materials. The low energy of the radiations necessitates additional means of detection and validation. These are provided by high-energy x-ray radiography and by active inspection based on inducing nuclear reactions in the nuclear materials. Positive confirmation that a nuclear material is present or absent can be provided by interrogation of the inspected object with penetrating probing radiation, such as neutrons and photons. The radiation induces specific reactions in the nuclear material yielding, in turn, penetrating signatures which can be detected outside the inspected object. The 'conventional' signatures are first and foremost fission signatures: prompt and delayed neutrons and gamma rays. Their intensity (number per fission) and the fact that they have broad energy (non-discrete, though unique) distributions and certain temporal behaviors are key to their use. The 'non-conventional' signatures are not related to the fission process but to the unique nuclear structure of each element or isotope in nature. This can be accessed through the excitation of isotopic nuclear levels (discrete and continuum) by neutron inelastic scattering or gamma resonance fluorescence. Finally there is an atomic signature, namely the high atomic number (Z>74), which obviously includes all the nuclear materials and their possible shielding. The presence of such high-Z elements can be inferred by techniques using high-energy x rays. The conventional signatures have been addressed in another article. Non-conventional signatures and some of their current or potential uses will be discussed here.

  6. Agenda for Public Meeting on the Physical Characterization of Grid-Connected Commercial and Residential Buildings End-Use Equipment and Appliances

    Broader source: Energy.gov [DOE]

    Download the agenda below for the July 11 Public Meeting on the Physical Characterization of Grid-Connected Commercial and Residential Buildings End-Use Equipment and Appliances.

  7. Cetane Performance and Chemistry Comparing Conventional Fuels...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Performance and Chemistry Comparing Conventional Fuels and Fuels Derived from Heavy Crude Sources Cetane Performance and Chemistry Comparing Conventional Fuels and Fuels...

  8. Max Tech and Beyond: Maximizing Appliance and Equipment Efficiency by Design

    SciTech Connect (OSTI)

    Desroches, Louis-Benoit; Garbesi, Karina

    2011-07-20T23:59:59.000Z

    It is well established that energy efficiency is most often the lowest cost approach to reducing national energy use and minimizing carbon emissions. National investments in energy efficiency to date have been highly cost-effective. The cumulative impacts (out to 2050) of residential energy efficiency standards are expected to have a benefit-to-cost ratio of 2.71:1. This project examined energy end-uses in the residential, commercial, and in some cases the industrial sectors. The scope is limited to appliances and equipment, and does not include building materials, building envelopes, and system designs. This scope is consistent with the scope of DOE's appliance standards program, although many products considered here are not currently subject to energy efficiency standards. How much energy could the United States save if the most efficient design options currently feasible were adopted universally? What design features could produce those savings? How would the savings from various technologies compare? With an eye toward identifying promising candidates and strategies for potential energy efficiency standards, the Max Tech and Beyond project aims to answer these questions. The analysis attempts to consolidate, in one document, the energy savings potential and design characteristics of best-on-market products, best-engineered products (i.e., hypothetical products produced using best-on-market components and technologies), and emerging technologies in research & development. As defined here, emerging technologies are fundamentally new and are as yet unproven in the market, although laboratory studies and/or emerging niche applications offer persuasive evidence of major energy-savings potential. The term 'max tech' is used to describe both best-engineered and emerging technologies (whichever appears to offer larger savings). Few best-on-market products currently qualify as max tech, since few apply all available best practices and components. The three primary analyses presented in this report are: Nevertheless, it is important to analyze best-on-market products, since data on truly max tech technologies are limited. (1) an analysis of the cross-cutting strategies most promising for reducing appliance and equipment energy use in the U.S.; (2) a macro-analysis of the U.S. energy-saving potential inherent in promising ultra-efficient appliance technologies; and (3) a product-level analysis of the energy-saving potential.

  9. "Table HC12.9 Home Appliances Characteristics by Midwest Census Region, 2005"

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghuraji Agro IndustriesTownDells,1 U.S. Department of Energygasoline4 Space2.9 Home Appliances

  10. "Table HC13.9 Home Appliances Characteristics by South Census Region, 2005"

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghuraji Agro IndustriesTownDells,1 U.S. Department of Energygasoline4 Space2.9 Home Appliances78 Water3.9

  11. "Table HC14.9 Home Appliances Characteristics by West Census Region, 2005"

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghuraji Agro IndustriesTownDells,1 U.S. Department of Energygasoline4 Space2.9 Home Appliances7835

  12. Development and introduction of methods for extracting hydrogen sulfide and hydrogen cyanide from coke-oven gas

    SciTech Connect (OSTI)

    Litvinenko, M.S.; Zaichenko, V.M.

    1980-01-01T23:59:59.000Z

    The progress between 1933 and the present in desulfurizing coal gas from coke ovens and making use of the by-products to produce sulfuric acid, thioyanates, etc. is described. The vacuum carbonate process and the monoethanolamine method are apparently now preferred, but some plants are still using modified arsenic-soda processes. More recently additional by-products have been thiocyanates (for producing acrylonitrile fiber) and hydrogen xanthanates. The production of other organic sulfur and cyanide compounds has been investigated for use as herbicides, corrosion inhibitors, etc. (LTN)

  13. Innovative coke oven gas cleaning system for retrofit applications. Quarterly environmental monitoring report No. 1, January 1, 1991--June 30, 1991

    SciTech Connect (OSTI)

    Not Available

    1992-08-24T23:59:59.000Z

    The coke plant at the Sparrows Point Plant consist of three coke oven batteries and two coal chemical plants. The by-product coke oven gas (COG) consists primarily of hydrogen, methane, carbon monoxide, nitrogen and contaminants consisting of tars, light oils (benzene, toluene, and xylene) hydrogen sulfide, ammonia, water vapor and other hydrocarbons. This raw coke oven gas needs to be cleaned of most of its contaminants before it can be used as a fuel at other operations at the Sparrows Point Plant. In response to environmental concerns, BSC decided to replace much of the existing coke oven gas treatment facilities in the two coal chemical Plants (A and B) with a group of technologies consisting of: Secondary Cooling of the Coke oven Gas; Hydrogen Sulfide Removal; Ammonia Removal; Deacification of Acid Gases Removed; Ammonia Distillation and Destruction; and, Sulfur Recovery. This combination of technologies will replace the existing ammonia removal system, the final coolers, hydrogen sulfide removal system and the sulfur recovery system. The existing wastewater treatment, tar recovery and one of the three light oil recovery systems will continue to be used to support the new innovative combination of COG treatment technologies.

  14. Implementing the chemical weapons convention

    SciTech Connect (OSTI)

    Kellman, B.; Tanzman, E. A.

    1999-12-07T23:59:59.000Z

    In 1993, as the CWC ratification process was beginning, concerns arose that the complexity of integrating the CWC with national law could cause each nation to implement the Convention without regard to what other nations were doing, thereby causing inconsistencies among States as to how the CWC would be carried out. As a result, the author's colleagues and the author prepared the Manual for National Implementation of the Chemical Weapons Convention and presented it to each national delegation at the December 1993 meeting of the Preparatory Commission in The Hague. During its preparation, the Committee of CWC Legal Experts, a group of distinguished international jurists, law professors, legally-trained diplomats, government officials, and Parliamentarians from every region of the world, including Central Europe, reviewed the Manual. In February 1998, they finished the second edition of the Manual in order to update it in light of developments since the CWC entered into force on 29 April 1997. The Manual tries to increase understanding of the Convention by identifying its obligations and suggesting methods of meeting them. Education about CWC obligations and available alternatives to comply with these requirements can facilitate national response that are consistent among States Parties. Thus, the Manual offers options that can strengthen international realization of the Convention's goals if States Parties act compatibly in implementing them. Equally important, it is intended to build confidence that the legal issues raised by the Convention are finite and addressable. They are now nearing competition of an internet version of this document so that interested persons can access it electronically and can view the full text of all of the national implementing legislation it cites. The internet address, or URL, for the internet version of the Manual is http: //www.cwc.ard.gov. This paper draws from the Manual. It comparatively addresses approximately thirty implementing issues, showing how various States Parties have enacted measures that are responsive to CWC obligations. It is intended to highlight the issues that States Parties must address and to identify trends among States Parties that might be useful to States that have not yet made crucial decisions as to how to resolve key matters. At various points in the text, country names are listed in parenthesis to identify pieces of national legislation that demonstrate the point in the text. It should not be inferred that nations not listed have not addressed the point or have taken a different position. In some cases, a nation's position is explained in somewhat more depth to give specific detail to an assertion in the text. Attached to this paper is a chart which illustrates how States Parties in the Central European region as well as the United States respond to the issues raised. Obviously, in preparing such a chart, many subtle provisions in national legislation must be simplified. The point of the chart is to portray, on a few pages, the major trends of legislation.

  15. EPA ENERGY STAR: Tackling Growth in Home Electronics and Small Appliances

    SciTech Connect (OSTI)

    Sanchez, Marla Christine; Brown, Richard; Homan, Gregory

    2008-11-17T23:59:59.000Z

    Over a decade ago, the electricity consumption associated with home electronics and other small appliances emerged onto the global energy policy landscape as one of the fastest growing residential end uses with the opportunity to deliver significant energy savings. As our knowledge of this end use matures, it is essential to step back and evaluate the degree to which energy efficiency programs have successfully realized energy savings and where savings opportunities have been missed.For the past fifteen years, we have quantified energy, utility bill, and carbon savings for US EPA?s ENERGY STAR voluntary product labeling program. In this paper, we present a unique look into the US residential program savings claimed to date for EPA?s ENERGY STAR office equipment, consumer electronics, and other small household appliances as well as EPA?s projected program savings over the next five years. We present a top-level discussion identifying program areas where EPA?s ENERGY STAR efforts have succeeded and program areas where ENERGY STAR efforts did not successfully address underlying market factors, technology issues and/or consumer behavior. We end by presenting the magnitude of ?overlooked? savings.

  16. Appliances, Lighting, Electronics, and Miscellaneous EquipmentElectricity Use in New Homes

    SciTech Connect (OSTI)

    Brown, Richard E.; Rittelman, William; Parker, Danny; Homan,Gregory

    2007-02-28T23:59:59.000Z

    The "Other" end-uses (appliances, lighting, electronics, andmiscellaneous equipment) continue to grow. This is particularly true innew homes, where increasing floor area and amenities are leading tohigher saturation of these types of devices. This paper combines thefindings of several field studies to assess the current state ofknowledge about the "Other" end-uses in new homes. The field studiesinclude sub-metered measurements of occupied houses in Arizona, Florida,and Colorado, as well as device-level surveys and power measurements inunoccupied new homes. We find that appliances, lighting, electronics, andmiscellaneous equipment can consume from 46 percent to 88 percent ofwhole-house electricity use in current low-energy homes. Moreover, theannual consumption for the "Other" end-uses is not significantly lower innew homes (even those designed for low energy use) compared to existinghomes. The device-level surveys show that builder-installed equipment isa significant contributor to annual electricity consumption, and certaindevices that are becoming more common in new homes, such as structuredwiring systems, contribute significantly to this power consumption. Thesefindings suggest that energy consumption by these "Other" end uses isstill too large to allow cost-effective zero-energy homes.

  17. APPLIANCE STANDARDS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Fan Light Kits External Power Supplies Walk-in Coolers & Freezers Commercial Refrigeration Equipment Refrigerators & Freezers Water Heaters CAC HP CAC HP Furnaces &...

  18. Residential Appliance Data, Assumptions and Methodology for End-Use Forecasting with EPRI-REEPS 2.1

    E-Print Network [OSTI]

    was developed by the Electric Power Research Institute (McMenamin et al. 1992). In this modeling framework the modeling framework of the Residential End-Use Energy Planning System (REEPS) developed for the Electric provided by the Appliance Model in the Residential End-Use Energy Planning System (REEPS), which

  19. "Diffusion of Innovation: Solar Oven Use in Lesotho (Africa)." Grundy, William and Roy Grundy. Advances in Solar Cooking: Proceedings of the 2nd International Conference on Solar Cooker Use and Technology. Shyam S. Nandwani, ed. July 12-15, 1994.

    E-Print Network [OSTI]

    Noble, William Stafford

    "Diffusion of Innovation: Solar Oven Use in Lesotho (Africa)." Grundy, William and Roy Grundy. Advances in Solar Cooking: Proceedings of the 2nd International Conference on Solar Cooker Use and Technology. Shyam S. Nandwani, ed. July 12-15, 1994. pp. 240-247. 1 DIFFUSION OF INNOVATION: SOLAR OVEN USE

  20. Energy-efficiency labels and standards: A guidebook for appliances, equipment and lighting

    SciTech Connect (OSTI)

    McMahon, James E.; Wiel, Stephen

    2001-02-16T23:59:59.000Z

    Energy-performance improvements in consumer products are an essential element in any government's portfolio of energy-efficiency and climate change mitigation programs. Governments need to develop balanced programs, both voluntary and regulatory, that remove cost-ineffective, energy-wasting products from the marketplace and stimulate the development of cost-effective, energy-efficient technology. Energy-efficiency labels and standards for appliances, equipment, and lighting products deserve to be among the first policy tools considered by a country's energy policy makers. The U.S. Agency for International Development (USAID) and the United Nations Foundation (UNF) recognize the need to support policy makers in their efforts to implement energy-efficiency standards and labeling programs and have developed this guidebook, together with the Collaborative Labeling and Appliance Standards Program (CLASP), as a primary reference. This guidebook was prepared over the course of the past year with significant contribution from the authors and reviewers mentioned previously. Their diligent participation has made this the international guidance tool it was intended to be. The lead authors would also like to thank the following individuals for their support in the development, production, and distribution of the guidebook: Marcy Beck, Elisa Derby, Diana Dhunke, Ted Gartner, and Julie Osborn of Lawrence Berkeley National Laboratory as well as Anthony Ma of Bevilacqua-Knight, Inc. This guidebook is designed as a manual for government officials and others around the world responsible for developing, implementing, enforcing, monitoring, and maintaining labeling and standards-setting programs. It discusses the pros and cons of adopting energy-efficiency labels and standards and describes the data, facilities, and institutional and human resources needed for these programs. It provides guidance on the design, development, implementation, maintenance, and evaluation of the programs and on the design of the labels and standards themselves. In addition, it directs the reader to references and other resources likely to be useful in conducting the activities described and includes a chapter on energy policies and programs that complement appliance efficiency labels and standards. This guidebook attempts to reflect the essential framework of labeling and standards programs. It is the intent of the authors and sponsors to distribute copies of this book worldwide at no charge for the general public benefit. The guidebook is also available on the web at www.CLASPonline.org and can be downloaded to be used intact or piecemeal for whatever beneficial purposes readers may conceive.

  1. Influence of technological factors on statics of hydrogen sulfide absorption from coke-oven gas by the ammonia process

    SciTech Connect (OSTI)

    Nazarov, V.G.; Kamennykh, B.M.; Rus'yanov, N.D.

    1983-01-01T23:59:59.000Z

    The basic technological factors that determine the effectiveness of hydrogen sulfide absorption from coke-oven gas by the cyclic ammonia process are the initial H/sub 2/S content of the gas, the degree of purification, the absorption temperature and the NH/sub 3/ and CO/sub 2/ contents of the absorbent solution. The effects of these factors on the statics of hydrogen sulfide absorption are studied. The investigation is based on the phase-equilibrium distributions of components in the absorption-desorption gas-cleaning cycle. The mathematical model is presented which includes the solution of a system of chemical equilibrium equations for reactions in the solution, material balances, and electrical neutrality. 4 references, 5 figures, 1 table.

  2. Comparison of Conventional Diesel and Reactivity Controlled...

    Broader source: Energy.gov (indexed) [DOE]

    DEER 10182012 Comparison of Conventional Diesel and Reactivity Controlled Compression Ignition (RCCI) Combustion in a Light-Duty Engine Rolf D. Reitz and Sage L. Kokjohn Engine...

  3. Conventional Energy Forum & Associated Vertical Business Development...

    Office of Environmental Management (EM)

    & Casino The Office of Indian Energy Tribal Leader Energy Forum on "Conventional Energy (Oil, Gas, and Coal) Forum & Associated Vertical Business Development: Best Practices in...

  4. 2014-04-30 Public Meeting Agenda: Physical Characterization of Smart and Grid-Connected Commercial and Residential Buildings End-Use Equipment and Appliances

    Broader source: Energy.gov [DOE]

    This document is the agenda for the Physical Characterization of Smart and Grid-Connected Commercial and Residential Buildings End-Use Equipment and Appliances public meeting being held on April 30, 2014.

  5. 2014-04-30 Public Meeting Presentation Slides: Physical Characterization of Smart and Grid-Connected Commercial and Residential Buildings End-Use Equipment and Appliances

    Broader source: Energy.gov [DOE]

    These documents contain slide decks presented at the Physical Characterization of Smart and Grid-Connected Commercial and Residential Buildings End-Use Equipment and Appliances public meeting held on April 30, 2014.

  6. Analysis of Potential Energy Saving and CO2 Emission Reduction of Home Appliances and Commercial Equipments in China

    SciTech Connect (OSTI)

    Zhou, Nan; Fridley, David; McNeill, Michael; Zheng, Nina; Letschert, Virginie; Ke, Jing; Saheb, Yamina

    2010-06-07T23:59:59.000Z

    China is now the world's largest producer and consumer of household appliances and commercial equipment. To address the growth of electricity use of the appliances, China has implemented a series of minimum energy performance standards (MEPS) for 30 appliances, and voluntary energy efficiency label for 40 products. Further, in 2005, China started a mandatory energy information label that covers 19 products to date. However, the impact of these standard and labeling programs and their savings potential has not been evaluated on a consistent basis. This research involved modeling to estimate the energy saving and CO{sub 2} emission reduction potential of the appliances standard and labeling program for products for which standards are currently in place, or under development and those proposed for development in 2010. Two scenarios that have been developed differ primarily in the pace and stringency of MEPS development. The 'Continued Improvement Scenario' (CIS) reflects the likely pace of post-2009 MEPS revisions, and the likely improvement at each revision step considering the technical limitation of the technology. The 'Best Practice Scenario' (BPS) examined the potential of an achievement of international best practice MEPS in 2014. This paper concludes that under the 'CIS' of regularly scheduled MEPS revisions to 2030, cumulative electricity consumption could be reduced by 9503 TWh, and annual CO{sub 2} emissions would be 16% lower than in the frozen efficiency scenario. Under a 'BPS' scenario for a subset of products, cumulative electricity savings would be 5450 TWh and annual CO{sub 2} emissions reduction would be 35% lower than in the frozen scenario.

  7. Analysis of Potential Energy Saving and CO2 Emission Reduction of Home Appliances and Commercial Equipments in China

    SciTech Connect (OSTI)

    Zhou, Nan; Fridley, David; McNeil, Michael; Zheng, Nina; Letschert, Virginie; Ke, Jing

    2011-04-01T23:59:59.000Z

    China has implemented a series of minimum energy performance standards (MEPS) for over 30 appliances, voluntary energy efficiency label for 40 products and a mandatory energy information label that covers 19 products to date. However, the impact of these programs and their savings potential has not been evaluated on a consistent basis. This paper uses modeling to estimate the energy saving and CO{sub 2} emission reduction potential of the appliances standard and labeling program for products for which standards are currently in place, under development or those proposed for development in 2010 under three scenarios that differ in the pace and stringency of MEPS development. In addition to a baseline 'Frozen Efficiency' scenario at 2009 MEPS level, the 'Continued Improvement Scenario' (CIS) reflects the likely pace of post-2009 MEPS revisions, and the likely improvement at each revision step. The 'Best Practice Scenario' (BPS) examined the potential of an achievement of international best practice efficiency in broad commercial use today in 2014. This paper concludes that under 'CIS', cumulative electricity consumption could be reduced by 9503 TWh, and annual CO{sub 2} emissions of energy used for all 37 products would be 16% lower than in the frozen efficiency scenario. Under a 'BPS' scenario for a subset of products, cumulative electricity savings would be 5450 TWh and annual CO{sub 2} emissions reduction of energy used for 11 appliances would be 35% lower.

  8. Impacts of China's Current Appliance Standards and LabelingProgram to 2020

    SciTech Connect (OSTI)

    Fridley, David; Aden, Nathaniel; Zhou, Nan; Lin, Jiang

    2007-03-03T23:59:59.000Z

    The report summarizes the history and nature of China sstandardsand labeling program in the Introduction in Section 1. Trends indomestic production, exports, penetration rates, unit energy consumptionand the history of S&L technical levels by product are discussed ingreat detail in Section 2. The national energy impactsanalysis found inSection 3 concludes that overall China s standards and labeling programsreduce total electricity consumption in 2020 by an annual 106 TWh, or 16percent of what would otherwise been expected in that year in the absenceof standards and labeling programs.In total, the report concludes thatthe S&L programs currently in place in China are expected to save acumulative 1143 TWh by 2020, or 9 percent of the cumulative consumptionof residential electricity to that year. In 2020 alone, annual savingsare expected to be equivalent to 11 percent of residential electricityuse. In average generation terms, this is equivalent to 27 1-GW coalfired plants that would have required around 75 million tonnes of coal tooperate.In comparison, savings from the US appliance standards programalone is expected to save 10 percent of residential electricityconsumption in 2020.

  9. Coke oven air and water pollution. 1970-June, 1981 (citations from the Engineering Index Data Base). Report for 1970-Jun 81

    SciTech Connect (OSTI)

    Not Available

    1981-07-01T23:59:59.000Z

    Monitoring, sampling, analyzing, transport properties, and control of emissions and effluents are cited in this compilation from worldwide journals. Pollutants described are sulfur dioxide, hydrogen sulfide, ammonia, phenols, benzopyrene, particulates and other trace elements and compounds. Process and equipment modifications, such as pipeline charging, wet and dry quenching, retrofitting, and oven leakage preventives are included. (This updated bibliography contains 210 citations, 9 of which are new entries to the previous edition.)

  10. Urinary 1-hydroxypyrene concentrations in Chinese coke oven workers relative to job category, respirator usage, and cigarette smoking

    SciTech Connect (OSTI)

    Bo Chen; Yunping Hu; Lixing Zheng; Qiangyi Wang; Yuanfen Zhou; Taiyi Jin [Fudan University, Shanghai (China). School of Public Health

    2007-09-15T23:59:59.000Z

    1-Hydroxypyrene (1-OHP) is a biomarker of recent exposure to polycyclic aromatic hydrocarbons (PAHs). We investigated whether urinary 1-OHP concentrations in Chinese coke oven workers (COWs) are modulated by job category, respirator usage, and cigarette smoking. The present cross-sectional study measured urinary 1-OHP concentrations in 197 COWs from Coking plant I and 250 COWs from Coking plant II, as well as 220 unexposed referents from Control plant I and 56 referents from Control plant II. Urinary 1-OHP concentrations (geometric mean, {mu}mol/mol creatinine) were 5.18 and 4.21 in workers from Coking plants I and II, respectively. The highest 1-OHP levels in urine were found among topside workers including lidmen, tar chasers, and whistlers. Benchmen had higher 1-OHP levels than other workers at the sideoven. Above 75% of the COWs exceeded the recommended occupational exposure limit of 2.3 {mu}mol/mol creatinine. Respirator usage and increased body mass index (BMI) slightly reduced 1-OHP levels in COWs. Cigarette smoking significantly increased urinary 1-OHP levels in unexposed referents but had no effect in COWs. Chinese COWs, especially topside workers and benchmen, are exposed to high levels of PAHs. Urinary 1-OHP concentrations appear to be modulated by respirator usage and BMI in COWs, as well as by smoking in unexposed referents.

  11. Law as Economy: Convention, Corporation, Currency

    E-Print Network [OSTI]

    Barrett, Jeffrey A.

    1015 Law as Economy: Convention, Corporation, Currency Ritu Birla* I. Law as Economy: Nomos. Law Inside/Outside Economy of an orthodox faith in economy as universal law, that is, in the free market as the law of the universe

  12. Organic agriculture cannot replace conventional agriculture

    E-Print Network [OSTI]

    Kolokolnikov, Theodore

    Organic agriculture cannot replace conventional agriculture Sina Adl , David Iron and Theodore Agriculture | Pathogen Dispersal Introduction Organic farming [1, 2] is gaining in popularity in Eu- rope, because or- ganic agriculture avoids using environmentally harmful chem- icals that pollute soil

  13. 2013 Alaska Federation of Natives Convention

    Broader source: Energy.gov [DOE]

    The Alaska Federation of Natives (AFN) Convention is the largest representative annual gathering in the United States of any Native peoples. Delegates are elected on a population formula of one...

  14. Indian Gaming 2012 Tradeshow and Convention

    Broader source: Energy.gov [DOE]

    The National Indian Gaming Association (NIGA) 2012 tradeshow andconventionwill take place April 1-4, 2012, in San Diego, California. The event features seminars and trainings andother activities...

  15. Innovative coke oven gas cleaning system for retrofit applications. Quarterly technical progress report No. 4, October 1, 1990 to December 31, 1990

    SciTech Connect (OSTI)

    Kwasnoski, D.

    1993-10-22T23:59:59.000Z

    Work on this coke oven gas cleaning demonstration project (CCT-II) this quarter has been focused on Phase IIB tasks, and include engineering, procurement, construction, and training. Additionally, plans for changes in the operating schedule of the coke plant that affect the demonstration project are described. Engineering efforts are nearly complete. Remaining to be finalized is an assessment of electrical heat tracing/insulation needs for pipe lines, assessment of fire protection requirements, and instrument modifications. Procurement of all major equipment items is complete, except for possible additions to fire fighting capabilities. Major focus is on expediting pipe and structural steel to the project site. Civil construction is complete except for minor pads and bases as required for pipe supports, etc. Erection of the hydrogen sulfide and ammonia scrubber vessels is complete. Installation of scrubber vessel internals is underway. A subcontractor has been retained to develop a computerized program for operations and maintenance training for the coke oven gas treatment plant. Recent developments in the coke plant operating plans will result in reductions in the rate of production of coke oven gas to be processed in the demonstration project.

  16. Combining confinement and conventional beef production

    E-Print Network [OSTI]

    Gregg, Michael Ronald

    1985-01-01T23:59:59.000Z

    COMBINING CONFINEMENT AND CONVENTIONAL BEEF PRODUCTION A PROFESSIONAL PAPER by Michael Ronald Gregg Submitted to the College of Agriculture of Texas A&M University in partial fulfillment of the requirements for the degree of MASTER... OF AGRICULTURE December, 1985 Major Subject: Animal Science Department of Animal Science COMBINING CONFINEMENT AND CONVENTIONAL BEEF PRODUCTION A PROFESSIONAL PAPER by Michael Ronald Gregg Approved as to style and content by: Chairman, Advzso ommit ee...

  17. Opportunities for regional harmonization of appliance standards and l abeling program

    SciTech Connect (OSTI)

    McNeil, Michael A.

    2003-09-01T23:59:59.000Z

    The South Asian Regional Initiative for Energy (SARI/Energy) calls for a series of activities to promote Energy Efficiency Standards and Labeling (EES&L) of end use appliances in the region. In pursuit of this goal, the project supports several seminars and meetings that bring together policymakers and stakeholders from throughout the region. The purpose of these gatherings is to encourage a dialogue among participants as to the benefits and barriers associated with EES&L programs. In addition, it is the role of the program organizers to provide participants with the technical details necessary to make progress towards effective efficiency programs. One component of the initiative is to encourage the harmonization (alignment) of existing program components, and the pursuit of new programs coordinated at the regional level. In support of this goal, the report provides information aimed at motivating and enabling cooperative activities which will provide concrete benefits to programs in each country, whether well developed, or still in the initial planning stage. It should be emphasized that the underlying objective of the harmonization component of the SARI/Energy project is to increase the potential for success of EES&L programs of all countries involved, and to reduce burdens on manufacturers, exporters and importers in each country. Harmonization ''for it's own sake'' is not desirable, nor is it suggested that policymakers should bring their programs in line with international norms if doing so would present a disadvantage to their own efficiency programs, or to commercial interests within their country. If there is no such disadvantage, however, the program encourages alignment of policies and provides a forum at which this alignment can be pursued. The report covers several main topics, with varying emphasis. First, a general discussion of the motivation for an explicit policy of regional harmonization is given. Next, the current status of existing programs in the region are discussed in some detail. The section that follows covers the harmonization of efficiency test procedures. Special attention is given to this component of an EES&L program because it is the most critical element in terms of harmonization--having incompatible test procedures between trade partners can greatly impact the effectiveness of a program, and it can also unduly impact trade. Currently, policymakers in India and Sri Lanka are collaborating with the goal of aligning refrigerator test procedures used in their respective programs. For this reason, the section on test procedures of refrigerators goes into a significant amount of technical detail, in order to provide the clearest possible articulation of issues to be resolved in bringing the procedures into alignment. Following the discussion of test procedures, the report contains a section each on harmonization of efficiency rating levels, development of label designs, and enforcement issues. The report is organized such that the sections covering current programs and test procedures are subdivided by target appliance. These sections are further divided by country, where applicable. Each section is concluded with recommendations.

  18. Accelerating the Adoption of Second-Tier Reach Standards forApplicable Appliance Products in China

    SciTech Connect (OSTI)

    Lin, Jiang; Fridley, David

    2007-03-01T23:59:59.000Z

    The minimum energy efficiency standards program for household appliances in China was initiated in 1989. Since 1996, CLASP and its implementing partner, LBNL, have assisted China in developing 11 minimum energy performance standards (MEPS) for 9 products and endorsement labels for 11 products including: refrigerators; air conditioners; clothes washers; televisions; printers; computers; monitors; fax machines; copiers; DVD/VCD players; external power supplies; and set-top boxes (under development). Before 2003, China's traditional approach to standards development involved small increases in efficiency requirements for implementation within 6 months of a standard's approval. Since 2003, China has adopted a new approach in setting MEPS. This new approach involves the development of two tiers of standards--one for initial implementation and a second tier at a more aggressive level of energy efficiency for implementation three to five years later. The second-tier standard is also referred to as a 'reach standard'. Reach standards have now been developed in China for: color TVs; refrigerators; air conditioners; and external power supplies. This report is presented in five sections. After the introduction in Section 1, Section 2 analyzes the distribution of the efficiency of refrigerators and air-conditioners in China based on data collected by the China Energy Label Center for the mandatory energy information label program. The results provide an assessment of the adoption of reach standards for these two products. Section 3 summarizes on-going collaborations with Shanghai related to early local adoption of reach standards, and presents both the impact and an analysis of barriers to the local adoption of reach standard for air-conditioners. Section 4 offers suggestions for local governments on how to move forward in adopting reach standards in their localities and concludes with a summary of the results and a plan for developing local capacity in order to achieve success in adopting reach standards.

  19. Max Tech Appliance Design: Potential for Maximizing U.S. Energy Savings through Standards

    SciTech Connect (OSTI)

    Garbesi, Karina; Desroches, Louis-Benoit; Bolduc, Christopher; Burch, Gabriel; Hosseinzadeh, Griffin; Saltiel, Seth

    2011-05-06T23:59:59.000Z

    This study surveyed the technical potential for efficiency improvements in 150 categories of appliances and equipment representing 33 quads of primary energy use across the US economy in 2010 and (1) documented efficient product designs, (2) identified the most promising cross-cutting strategies, and (3) ranked national energy savings potential by end use. Savings were estimated using a method modeled after US Department of Energy priority-setting reports - simplified versions of the full technical and economic analyses performed for rulemakings. This study demonstrates that large savings are possible by replacing products at the end-of-life with ultra-efficient models that use existing technology. Replacing the 50 top energy-saving end-uses (constituting 30 quads of primary energy consumption in 2010) with today's best-on-market equivalents would save {approx}200 quads of US primary energy over 30 years (25% of consumption anticipated there from). For the 29 products for maximum feasible savings potential could be estimated, the savings were twice as high. These results demonstrate that pushing ultra-efficient products to market could significantly escalate carbon emission reductions and is a viable strategy for sustaining large emissions reductions through standards. The results of this analysis were used by DOE for new coverage prioritization, to identify key opportunities for product prototyping and market development, and will leverage future standards rulemakings by identifying the full scope of maximum feasible technology options. High leverage products include advances lighting systems, HVAC, and televisions. High leverage technologies include electronic lighting, heat pumps, variable speed motors, and a host of controls-related technologies.

  20. Realized and Projected Impacts of U.S. Energy Efficiency Standards for Residential and Commercial Appliances

    SciTech Connect (OSTI)

    Meyers, Stephen P.; McMahon, James; Atkinson, Barbara

    2008-05-08T23:59:59.000Z

    This study estimated energy, environmental and consumer economic impacts of U.S. Federal residential energy efficiency standards that became effective in the 1988-2006 period, and of energy efficiency standards for fluorescent lamp ballasts and distribution transformers. These standards have been the subject of in-depth analyses conducted as part of DOE's standards rulemaking process. This study drew on those analyses, but updated certain data and developed a common framework and assumptions for all of the products in order to estimate realized impacts and to update projected impacts. It also performed new analysis for the first (1990) fluorescent ballast standards, which had been introduced in the NAECA legislation without a rulemaking. We estimate that the considered standards will reduce residential/ commercial primary energy consumption and carbon dioxide emissions in 2030 by 4percent compared to the levels expected without any standards. The reduction for the residential sector is larger, at 8percent. The estimated cumulative energy savings from the standards amount to 39 quads by 2020, and 63 quads by 2030. The standards will also reduce emissions of carbon dioxide by considerable amounts.The estimated cumulative net present value of consumer benefit amounts to $241 billion by 2030, and grows to $269 billion by 2045. The overall ratio of consumer benefits to costs (in present value terms) in the 1987-2050 period is 2.7 to 1. Although the estimates made in this study are subject to a fair degree of uncertainty, we believe they provide a reasonable approximation of the national benefits resulting from Federal appliance efficiency standards.

  1. A Global Review of Incentive Programs to Accelerate Energy-Efficient Appliances and Equipment

    SciTech Connect (OSTI)

    de la Rue du Can, Stephane; Phadke, Amol; Leventis, Greg; Gopal, Anand

    2013-08-01T23:59:59.000Z

    Incentive programs are an essential policy tool to move the market toward energy-efficient products. They offer a favorable complement to mandatory standards and labeling policies by accelerating the market penetration of energy-efficient products above equipment standard requirements and by preparing the market for increased future mandatory requirements. They sway purchase decisions and in some cases production decisions and retail stocking decisions toward energy-efficient products. Incentive programs are structured according to their regulatory environment, the way they are financed, by how the incentive is targeted, and by who administers them. This report categorizes the main elements of incentive programs, using case studies from the Major Economies Forum to illustrate their characteristics. To inform future policy and program design, it seeks to recognize design advantages and disadvantages through a qualitative overview of the variety of programs in use around the globe. Examples range from rebate programs administered by utilities under an Energy-Efficiency Resource Standards (EERS) regulatory framework (California, USA) to the distribution of Eco-Points that reward customers for buying efficient appliances under a government recovery program (Japan). We found that evaluations have demonstrated that financial incentives programs have greater impact when they target highly efficient technologies that have a small market share. We also found that the benefits and drawbacks of different program design aspects depend on the market barriers addressed, the target equipment, and the local market context and that no program design surpasses the others. The key to successful program design and implementation is a thorough understanding of the market and effective identification of the most important local factors hindering the penetration of energy-efficient technologies.

  2. "Table HC13.10 Home Appliances Usage Indicators by South Census Region, 2005"

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghuraji Agro IndustriesTownDells,1 U.S. Department of Energygasoline4 Space2.9 Home Appliances Housing

  3. "Table HC14.10 Home Appliances Usage Indicators by West Census Region, 2005"

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghuraji Agro IndustriesTownDells,1 U.S. Department of Energygasoline4 Space2.9 Home Appliances78 Water3.90

  4. "Table HC15.10 Home Appliances Usage Indicators by Four Most Populated States, 2005"

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghuraji Agro IndustriesTownDells,1 U.S. Department of Energygasoline4 Space2.9 Home Appliances7835 Housing0

  5. "Table HC15.9 Home Appliances Characteristics by Four Most Populated States, 2005"

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghuraji Agro IndustriesTownDells,1 U.S. Department of Energygasoline4 Space2.9 Home Appliances7835258

  6. "Table HC3.10 Home Appliances Usage Indicators by Owner-Occupied Housing Unit, 2005"

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghuraji Agro IndustriesTownDells,1 U.S. Department of Energygasoline4 Space2.9 Home Appliances78352580 Home

  7. The Effect of CO2 Pricing on Conventional and Non- Conventional Oil Supply and Demand

    E-Print Network [OSTI]

    Mjean, Aurlie; Hope, Chris

    What would be the effect of CO2 pricing on global oil supply and demand? This paper introduces a model describing the interaction between conventional and non-conventional oil supply in a Hotelling framework and under CO2 constraints. The model...

  8. Comparing Evolvable Hardware to Conventional Classifiers for

    E-Print Network [OSTI]

    Hellebrand, Sybille

    Classifiers !! Experiment Setup and Results !! Discussion and Future Work Glette, Gruber, Kaufmann, Torresen than ANNs Glette, Gruber, Kaufmann, Torresen, Sick, Platzner 4 AHS 2008 #12;System Overview Glette-Application !! Conventional and Evolvable Hardware Classifiers !! Experiment Setup and Results !! Discussion and Future Work

  9. Convention on Cybercrime Budapest, 23.XI.2001

    E-Print Network [OSTI]

    Shamos, Michael I.

    -operation in criminal matters; Convinced that the present Convention is necessary to deter action directed against, a common criminal policy aimed at the protection of society against cybercrime, inter alia, by adopting by the risk that computer networks and electronic information may also be used for committing criminal

  10. --Discussion Paper--ORGANIC AND CONVENTIONAL POTATOES

    E-Print Network [OSTI]

    Radeloff, Volker C.

    1 --Discussion Paper-- ORGANIC AND CONVENTIONAL POTATOES: PRICING AND DEMAND, 2000-2005 I. ORGANICS). Among fresh vegetables, the top organic purchases are lettuce, tomatoes, broccoli, onions, and potatoes. Among selected vegetables, a recent US study found the largest organic premium was for potatoes (Zhang

  11. Comparison of Conventional Diesel and Reactivity Controlled Compressio...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Conventional Diesel and Reactivity Controlled Compression Ignition (RCCI) Combustion in a Light-Duty Engine Comparison of Conventional Diesel and Reactivity Controlled Compression...

  12. Public Comment re NOI on Convention on Supplementary Compensation...

    Energy Savers [EERE]

    NOI on Convention on Supplementary Compensation for Nuclear Damage Public Comment re NOI on Convention on Supplementary Compensation for Nuclear Damage ENERGYSOLUTIONS' Comment in...

  13. Public Comment re Convention on Supplementary Compensation for...

    Energy Savers [EERE]

    Convention on Supplementary Compensation for Nuclear Damage Contingent Cost Allocation Public Comment re Convention on Supplementary Compensation for Nuclear Damage Contingent Cost...

  14. Conventional Hydropower Technologies, Wind And Water Power Program...

    Office of Environmental Management (EM)

    Conventional Hydropower Technologies, Wind And Water Power Program (WWPP) (Fact Sheet) Conventional Hydropower Technologies, Wind And Water Power Program (WWPP) (Fact Sheet) The US...

  15. Low Temperature Heat Release Behavior of Conventional and Alternative...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Low Temperature Heat Release Behavior of Conventional and Alternative Fuels in a Motored Engine Low Temperature Heat Release Behavior of Conventional and Alternative Fuels in a...

  16. National Report Joint Convention on the Safety of Spent Fuel...

    Office of Environmental Management (EM)

    National Report Joint Convention on the Safety of Spent Fuel Management and on the Safety of Radioactive Waste Management National Report Joint Convention on the Safety of Spent...

  17. Lesson 9 - Solar Ovens

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville PowerCherries 82981-1cnHigh SchoolIn12electron 9 5 -ofLearningLensless4 Lensless Lesson 16 -

  18. Measures to implement the Chemical Weapons Convention

    SciTech Connect (OSTI)

    Tanzman, E.; Kellman, B.

    1999-11-05T23:59:59.000Z

    This seminar is another excellent opportunity for those involved in preventing chemical weapons production and use to learn from each other about how the Chemical Weapons Convention (CWC) can become a foundation of arms control in Africa and around the world. The author is grateful to the staff of the Organization for the Prohibition of Chemical Weapons (OPCW) for inviting him to address this distinguished seminar. The views expressed in this paper are those of the authors alone, and do not represent the position of the government of the US nor or of any other institution. In 1993, as the process of CWC ratification was beginning, concerns arose that the complexity of integrating the treaty with national law would cause each nation to implement the Convention without regard to what other nations were doing, thereby causing inconsistencies among States Parties in how the Convention would be carried out. As a result the Manual for National Implementation of the Chemical Weapons Convention was prepared and presented it to each national delegation at the December 1993 meeting of the Preparatory Commission in The Hague. During its preparation, the Manual was reviewed by the Committee of Legal Experts on National Implementation of the Chemical Weapons Convention, a group of distinguished international jurists, law professors, legally-trained diplomats, government officials, and Parliamentarians from every region of the world, including Mica. In February 1998, the second edition of the Manual was published in order to update it in light of developments since the CWC entered into force on 29 April 1997. The second edition 1998 clarified the national implementation options to reflect post-entry-into-force thinking, added extensive references to national implementing measures that had been enacted by various States Parties, and included a prototype national implementing statute developed by the authors to provide a starting point for those whose national implementing measures were still under development. Last month, the Web Edition of the Manual was completed. It's internet address, or URL, is http://www.cwc.anl.gov/.

  19. Entertaining in a Hurry.

    E-Print Network [OSTI]

    Sweeten, Mary K.; Reasonover, Frances L.

    1980-01-01T23:59:59.000Z

    cookbook for some of these suggestions. 4 Using Appliances Effective use of small appliances helps make enter taining quick and easy. The microwave oven and food processor are two newer appliances found in Texas horr 1 increasing numbers.... These appliances cer tainl: (e not a must, but do make food preparation less time consuming. Research shows that a home maker using both the microwave oven and a conven tional oven save up to 9 hours a week. This frees her for other activities. Microwave oven...

  20. Energy and CO2 Efficient Scheduling of Smart Home Appliances Kin Cheong Sou, Mikael Kordel, Jonas Wu, Henrik Sandberg and Karl Henrik Johansson

    E-Print Network [OSTI]

    Johansson, Karl Henrik

    Energy and CO2 Efficient Scheduling of Smart Home Appliances Kin Cheong Sou, Mikael Kordel, Jonas Wu, Henrik Sandberg and Karl Henrik Johansson Abstract-- A major goal of smart grid technology (e.g., smart meters) is to provide consumers with demand response signals such as electricity tariff and CO2

  1. Innovative coke oven gas cleaning system for retrofit applications. Quarterly environmental monitoring report No. 3, January 1, 1991--December 31, 1991

    SciTech Connect (OSTI)

    Not Available

    1992-10-16T23:59:59.000Z

    Bethlehem Steel Corporation (BSC), in conjunction with the Department of Energy (DOE) is conducting a Clean Coal Technology (CCT) project at its Sparrows Point, Maryland Coke Oven Plant. This project combines several existing technologies into an integrated system for removing impurities from Coke Oven Gas (COG) to make it an acceptable fuel. DOE is providing cost-sharing under a Cooperative Agreement with BSC. This Cooperative Agreement requires BSC to develop and conduct an Environmental Monitoring Plan (EMP) for the Clean Coal Technology project and to report the status of the EMP on a quarterly basis. This report is the third quarterly status report of the EMP. It covers the Environmental Monitoring Plan activities for the full year of 1991 from January 1, 1991 through December 31, 1991, including the forth quarter. See Sections 2, 3 and 4 for status reports of the Project Installation and Commissioning, the Environmental Monitoring activities and the Compliance Monitoring results for the period. Section 5 contains a list of Compliance Reports submitted to regulatory agencies during the period. The EMP describes in detail the environmental monitoring activities to be performed during the project execution. The purpose of the EMP is to: (1) document the extent of compliance of monitoring activities, i.e. those monitoring required to meet permit requirements, (2) confirm the specific impacts predicted in the National Environmental Policy Act documentation, and (3) establish an information base for the assessment of the environmental performance of the technology demonstrated by the project.

  2. Energy-Efficiency Labels and Standards: A Guidebook forAppliances, Equipment, and Lighting - 2nd Edition

    SciTech Connect (OSTI)

    Wiel, Stephen; McMahon, James E.

    2005-04-28T23:59:59.000Z

    Energy-performance improvements in consumer products are an essential element in any government's portfolio of energy-efficiency and climate change mitigation programs. Governments need to develop balanced programs, both voluntary and regulatory, that remove cost-ineffective, energy-wasting products from the marketplace and stimulate the development of cost-effective, energy-efficient technology. Energy-efficiency labels and standards for appliances, equipment, and lighting products deserve to be among the first policy tools considered by a country's energy policy makers. The U.S. Agency for International Development (USAID) and several other organizations identified on the cover of this guidebook recognize the need to support policy makers in their efforts to implement energy-efficiency standards and labeling programs and have developed this guidebook, together with the Collaborative Labeling and Appliance Standards Program (CLASP), as a primary reference. This second edition of the guidebook was prepared over the course of the past year, four years after the preparation of the first edition, with a significant contribution from the authors and reviewers mentioned previously. Their diligent participation helps maintain this book as the international guidance tool it has become. The lead authors would like to thank the members of the Communications Office of the Environmental Energy Technologies Division, Lawrence Berkeley National Laboratory for their support in the development, production, and distribution of the guidebook. This guidebook is designed as a manual for government officials and others around the world responsible for developing, implementing, enforcing, monitoring, and maintaining labeling and standards setting programs. It discusses the pros and cons of adopting energy-efficiency labels and standards and describes the data, facilities, and institutional and human resources needed for these programs. It provides guidance on the design, development, implementation, maintenance, and evaluation of the programs and on the design of the labels and standards themselves. In addition, it directs the reader to references and other resources likely to be useful in conducting the activities described and includes a chapter on energy policies and programs that complement appliance efficiency labels and standards. This guidebook attempts to reflect the essential framework of labeling and standards programs. It is the intent of the authors and sponsor to distribute copies of this book worldwide, at no charge, for the general public benefit. The guidebook is also available on the web at www.clasponline.org and may be downloaded to be used intact or piecemeal for whatever beneficial purposes readers may conceive.

  3. Process for separating, especially in multiple stages, acid components such as CO/sub 2/, HCN and specifically H/sub 2/S, from gases, especially from coke oven gases, by means of ammonia recirculation scrubbing

    SciTech Connect (OSTI)

    Bauer, H.K.; Otte, E.A.W.

    1984-10-16T23:59:59.000Z

    A process of separating in multiple stages acid components in coke oven gas such as CO/sub 2/, HCN and particularly H/sub 2/S by ammonia scrubbing wherein the ammonia used in scrubbing is deacidified to remove the acid components and is recirculated to the scrubbing process at least in part as substantially pure liquid ammonia.

  4. Comparing the Performance of SunDiesel and Conventional Diesel...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    the Performance of SunDiesel and Conventional Diesel in a Light-Duty Vehicle and Engines Comparing the Performance of SunDiesel and Conventional Diesel in a Light-Duty Vehicle and...

  5. Startup and initial operation of a DFGD and pulse jet fabric filter system on Cokenergy's Indiana Harbor coke oven off gas system

    SciTech Connect (OSTI)

    Morris, W.J.; Gansley, R.R.; Schaddell, J.G.

    1999-07-01T23:59:59.000Z

    This paper describes the design, initial operation and performance testing of a Dry Flue Gas Desulfurization (DFGD) and Modular Pulse Jet Fabric Filter (MPJFF) system installed at Cokenergy's site in East Chicago, Indiana. The combined flue gas from the sixteen (16) waste heat recovery boilers is processed by the system to control emissions of sulfur dioxide and particulates. These boilers recover energy from coke oven off gas from Indiana Harbor Coke Company's coke batteries. The DFGD system consists of two 100% capacity absorbers. Each absorber vessel uses a single direct drive rotary atomizer to disperse the lime slurry for SO{sub 2} control. The MPJFF consists of thirty two (32) modules arranged in twin sixteen-compartment (16) units. The initial start up of the DFGD/MPJFF posed special operational issues due to the low initial gas flows through the system as the four coke oven batteries were cured and put in service for the first time. This occurred at approximately monthly intervals beginning in March 1998. A plan was implemented to perform a staged startup of the DFGD and MPJFF to coincide with the staged start up of the coke batteries and waste heat boilers. Operational issues that are currently being addressed include reliability of byproduct removal. Performance testing was conducted in August and September 1998 at the inlet of the system and the outlet stack. During these tests, particulate, SO{sub 2}, SO{sub 3}, and HCI emissions were measured simultaneously at the common DFGD inlet duct and the outlet stack. Measurements were also taken for average lime, water, and power consumption during the tests as well as system pressure losses. These results showed that all guarantee parameters were achieved during the test periods. The initial operation and performance testing are described in this paper.

  6. Application of the Australian Geothermal Reporting Code to "Convention...

    Open Energy Info (EERE)

    of the Australian Geothermal Reporting Code to "Conventional" Geothermal Projects. In: Proceedings. Australian Geothermal Energy Conference; 20101117; Adelaide, Australia....

  7. "CONVENTION THEORY": IS THERE A FRENCH SCHOOL OF ORGANIZATIONAL INSTITUTIONALISM?

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    to ally convention theory (CT) and new institutional organization theory (NIOT)? Convention theory into management theory in the 1990s, at the same time that neoinstitutional organization theory, buoyed1 "CONVENTION THEORY": IS THERE A FRENCH SCHOOL OF ORGANIZATIONAL INSTITUTIONALISM? Thibault

  8. April 30 Public Meeting: Physical Characterization of Smart and Grid-Connected Commercial and Residential Building End-Use Equipment and Appliances

    Broader source: Energy.gov [DOE]

    These documents contain slide decks presented at the Physical Characterization of Smart and Grid-Connected Commercial and Residential Buildings End-Use Equipment and Appliances public meeting held on April 30, 2014. The first document includes the first presentation from the meeting: DOE Vision and Objectives. The second document includes all other presentations from the meeting: Terminology and Definitions; End-User and Grid Services; Physical Characterization Framework; Value, Benefits & Metrics.

  9. A REVIEW OF ASSUMPTIONS AND ANALYSIS IN EPRI EA-3409, "HOUSEHOLD APPLIANCE CHOICE: REVISION OF REEPS BEHAVIORAL MODELS"

    E-Print Network [OSTI]

    Wood, D.J.

    2010-01-01T23:59:59.000Z

    and electric forced-air; heat pumps; and electric baseboard)are conventional air conditioning and heat pump, given theair choice elec forced-air choice heat pump choice elec

  10. Public comment re Convention on Supplementary Compensation on...

    Broader source: Energy.gov (indexed) [DOE]

    the Nuclear Energy Institute (NEI) on Convention on Supplementary Compensation on Nuclear Damage Contingent Cost Allocation; Section 934 of the Energy Independence and Security Act...

  11. Table 32. Conventional Motor Gasoline Prices by Grade, Sales...

    Gasoline and Diesel Fuel Update (EIA)

    Information AdministrationPetroleum Marketing Annual 1998 Table 32. Conventional Motor Gasoline Prices by Grade, Sales Type, PAD District, and State (Cents per Gallon...

  12. Table 32. Conventional Motor Gasoline Prices by Grade, Sales...

    Gasoline and Diesel Fuel Update (EIA)

    - - - - W W - - - - - - See footnotes at end of table. 32. Conventional Motor Gasoline Prices by Grade, Sales Type, PAD District, and State 86 Energy Information...

  13. Table 32. Conventional Motor Gasoline Prices by Grade, Sales...

    U.S. Energy Information Administration (EIA) Indexed Site

    Information Administration Petroleum Marketing Annual 1995 Table 32. Conventional Motor Gasoline Prices by Grade, Sales Type, PAD District, and State (Cents per Gallon...

  14. Table 32. Conventional Motor Gasoline Prices by Grade, Sales...

    U.S. Energy Information Administration (EIA) Indexed Site

    - - - - 64.7 64.7 - - - - - - See footnotes at end of table. 32. Conventional Motor Gasoline Prices by Grade, Sales Type, PAD District, and State 86 Energy Information...

  15. H2A Hydrogen Delivery Infrastructure Analysis Models and Conventional...

    Energy Savers [EERE]

    H2A Hydrogen Delivery Infrastructure Analysis Models and Conventional Pathway Options Analysis Results - Interim Report H2A Hydrogen Delivery Infrastructure Analysis Models and...

  16. COMPRESSIVE SAMPLING VS. CONVENTIONAL IMAGING Jarvis Haupt and Robert Nowak

    E-Print Network [OSTI]

    Haupt, Jarvis

    COMPRESSIVE SAMPLING VS. CONVENTIONAL IMAGING Jarvis Haupt and Robert Nowak University of Wisconsin from random projections than from pixel samples. However, the performance of CS can degrade markedly

  17. Public comment re Convention on Supplementary Compensation Contingent...

    Office of Environmental Management (EM)

    the funding obligations under the Convention on Supplementary Compensation for Nuclear Damage (CSC) and Section 934 of the Energy Independence and Security Act of 2007. American...

  18. DOE Notice of Inquiry on the Convention on Supplementary Compensation...

    Energy Savers [EERE]

    Inquiry on the Convention on Supplementary Compensation for Nuclear Damage (CSC) Contingent Cost Allocation - March 2, 2011 Meeting with CIGNL DOE Notice of Inquiry on the...

  19. Convention on Supplementary Compensation for Nuclear Damage Contingent...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Allocation, Section 934 Convention on Supplementary Compensation for Nuclear Damage Contingent Cost Allocation, Section 934 LES comments in response to Notice of Inquiry on...

  20. Technical support document: Energy efficiency standards for consumer products: Room air conditioners, water heaters, direct heating equipment, mobile home furnaces, kitchen ranges and ovens, pool heaters, fluorescent lamp ballasts and television sets. Volume 1, Methodology

    SciTech Connect (OSTI)

    Not Available

    1993-11-01T23:59:59.000Z

    The Energy Policy and Conservation Act (P.L. 94-163), as amended, establishes energy conservation standards for 12 of the 13 types of consumer products specifically covered by the Act. The legislation requires the Department of Energy (DOE) to consider new or amended standards for these and other types of products at specified times. DOE is currently considering amending standards for seven types of products: water heaters, direct heating equipment, mobile home furnaces, pool heaters, room air conditioners, kitchen ranges and ovens (including microwave ovens), and fluorescent light ballasts and is considering establishing standards for television sets. This Technical Support Document presents the methodology, data, and results from the analysis of the energy and economic impacts of the proposed standards. This volume presents a general description of the analytic approach, including the structure of the major models.

  1. Land Use Greenhouse Gas Emissions from Conventional Oil

    E-Print Network [OSTI]

    Turetsky, Merritt

    emissions of California crude and in situ oil sands production (crude refineryLand Use Greenhouse Gas Emissions from Conventional Oil Production and Oil Sands S O N I A Y E H and Alberta as examples for conventional oil production as well as oil sands production in Alberta

  2. Combustion Safety for Appliances Using Indoor Air (Fact Sheet), Building America Case Study: Technology Solutions for New and Existing Homes, Building Technologies Office (BTO)

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page onYouTube YouTube Note: Since the YouTube platformBuildingCoal Combustion ProductsCombustion Safety for Appliances Using

  3. Actors, coalitions and the framework convention on climate change

    E-Print Network [OSTI]

    Sewell, Granville C

    2005-01-01T23:59:59.000Z

    This study examines the political processes through which the Framework Convention on Climate Change was negotiated and the initial efforts of the United States, the Netherlands, and Japan to adopt national policies and ...

  4. Sandia software guidelines. Volume 3. Standards, practices, and conventions

    SciTech Connect (OSTI)

    Not Available

    1986-07-01T23:59:59.000Z

    This volume is one in a series of Sandia Software Guidelines intended for use in producing quality software within Sandia National Laboratories. In consonance with the IEEE Standard for Software Quality Assurance Plans, this volume identifies software standards, conventions, and practices. These guidelines are the result of a collective effort within Sandia National Laboratories to define recommended deliverables and to document standards, practices, and conventions which will help ensure quality software. 66 refs., 5 figs., 6 tabs.

  5. Segmented vs conventional numerals: legibility and long term retention

    E-Print Network [OSTI]

    Hill, Steve Edgar

    1971-01-01T23:59:59.000Z

    SEGMENTED VS CONVENTIONAL NUMERALS: LEGIBILITY AND LONG TERM RETENTION A Thesis by STEVE EDGAR HILL Submitted to the Graduate College of Texas A8cM University in partial fulfillment of the requirements for the degree of MASTER OF SCIENCE... December 1971 Ma]or Subject: Industrial Engineering SEGMENTED VS CONVENTIONAL NUMERALS: LEGIBILITY AND LONG TERM RETENTION A Thesis STEVE EDGAR HILL Approved as to style and content by: Elias Chairman of Committee) r. A. W. ortham (Head...

  6. Validity of conventional assumptions concerning flexible response. Research report

    SciTech Connect (OSTI)

    Gutierrez, M.J.

    1989-01-01T23:59:59.000Z

    The North Atlantic Treaty Organization is an alliance for collective defense. Made up of 16 countries, NATO has been a successful alliance because there has been no war in Europe since 1945. In 1967, NATO adopted the strategy of flexible response, a strategy dependent upon conventional, tactical nuclear, and strategic nuclear weapons to provide deterrence from a Warsaw Pact attack. Although successful, NATO is suffering from an erosion in conventional strength. NATO continues to make assumptions about its conventional capabilities to successfully meet the requirements of the flexible response strategy. In the present day world of NATO, there is limited funding, a fact that is not likely to change any time in the foreseeable future. Limited funding makes it impossible to buy all the conventional force structure needed to ideally support the current strategy, also a fact that is unlikely to change. This paper shows limitations in some of the ways NATO assumes it can conventionally perform its mission. It is the author's position that NATO should modernize its conventional thinking to make it more in line with the realities of the situation NATO finds itself in today.

  7. Energy Star Appliances

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville Power AdministrationField8, 2000Consumption Survey (CBECS)LaboratorySmart-Reserved-Power Sign

  8. The Hadron Hose: Continuous Toroidal Focusing for Conventional Neutrino Beams

    E-Print Network [OSTI]

    J. Hylen; D. Bogert; R. Ducar; V. Garkusha; J. Hall; C. Jensen; S. E. Kopp; M. Kostin; A. Lyukov; A. Marchionni; M. May; M. D. Messier; R. Milburn; F. Novoskoltsev; M. Proga; D. Pushka; W. Smart; J. Walton; V. Zarucheisky; R. M. Zwaska

    2002-10-21T23:59:59.000Z

    We have developed a new focusing system for conventional neutrino beams. The ``Hadron Hose'' is a wire located in the meson decay volume, downstream of the target and focusing horns. The wire is pulsed with high current to provide a toroidal magnetic field which continuously focuses mesons. The hose increases the neutrino event rate and reduces differences between near-field and far-field neutrino spectra for oscillation experiments. We have studied this device as part of the development of the Neutrinos at the Main Injector (NuMI) project, but it might also be of use for other conventional neutrino beams.

  9. Nuclear Proliferation and the Deterrence of Conventional War: Justin Pollard

    E-Print Network [OSTI]

    Sadoulet, Elisabeth

    Nuclear Proliferation and the Deterrence of Conventional War: A Proposal Justin Pollard April 2009) Introduction It seems counterintuitive to think that the spread of nuclear weapons could make the world a safer of ubiquitous nuclear armament is a more dangerous and unstable one. Certainly, a weapon of the nuclear

  10. Comparative Analysis of Conventional Oil and Gas and

    E-Print Network [OSTI]

    Jaramillo, Paulina

    Comparative Analysis of Conventional Oil and Gas and Wind Project Decommissioning Regulations Generation Energy, a non-profit renewable investment firm focusing on extending capital from private School and on the board of the Vermont Energy Investment Corporation, which manages ``Efficiency Vermont

  11. Appendix IV. Risks Associated with Conventional Uranium Milling Introduction

    E-Print Network [OSTI]

    ", uranium is removed from the processed ore with sulfuric acid. Sodium chlorate is also addedAppendix IV. Risks Associated with Conventional Uranium Milling Operations Introduction Although uranium mill tailings are considered byproduct materials under the AEA and not TENORM, EPA's Science

  12. A Foundation for Conventional and Temporal Query Optimization

    E-Print Network [OSTI]

    Snodgrass, Richard T.

    substantially from built-in temporal support in the DBMS. To achieve this, temporal query representation DBMS architectures and ones where the temporal support is obtained via a layer on top of a conventional DBMS. This foundation captures duplicates and ordering for all queries, as well as coalescing

  13. Process for the elimination of waste water produced upon the desulfurization of coking oven gas by means of wash solution containing organic oxygen-carrier, with simultaneous recovery of elemental sulfur

    SciTech Connect (OSTI)

    Diemer, P.; Brake, W.; Dittmer, R.

    1985-04-16T23:59:59.000Z

    A process is disclosed for the elimination of waste water falling out with the desulfurization of coking oven gas by means of an organic oxygen carrier-containing washing solution with simultaneous recovery of elemental sulfur. The waste water is decomposed in a combustion chamber in a reducing atmosphere at temperatures between about 1000/sup 0/ and 1100/sup 0/ C. under such conditions that the mole ratio of H/sub 2/S:SO/sub 2/ in the exhaust gas of the combustion chamber amounts to at least 2:1. Sulfur falling out is separated and the sensible heat of the exhaust gas is utilized for steam generation. The cooled and desulfurized exhaust gas is added to the coking oven gas before the pre-cooling. Sulfur falling out from the washing solution in the oxidizer is separated out and lead into the combustion chamber together with the part of the washing solution discharged as waste water from the washing solution circulation. Preferred embodiments include that the sulfur loading of the waste water can amount to up to about 370 kg sulfur per m/sup 3/ waste water; having the cooling of sulfur-containing exhaust gas leaving the combustion chamber follow in a waste heat boiler and a sulfur condenser heated by pre-heated boiler feed water, from which condenser sulfur is discharged in liquid state.

  14. EM Prepares Report for Convention on Safety of Spent Fuel and...

    Broader source: Energy.gov (indexed) [DOE]

    agency to produce a report recently for the Joint Convention on the Safety of Spent Fuel Management and on the Safety of Radioactive Waste Management. The Convention was...

  15. Conventional Neutrino Beam Experiments: Present and Future Generations

    SciTech Connect (OSTI)

    Harris, Deborah A. [Fermi National Accelerator Laboratory, Batavia, Illinois 60510 (United States)

    2011-10-06T23:59:59.000Z

    There are currently four conventional neutrino beams produced around the world serving a total of six different neutrino experiments devoted to a broad range of physics. In this article we discuss the current generation of experiments served by those beamlines, future plans for those beamlines, and plans for yet newer facilities, with a focus on lessons the current generation of experiments can pass on to future generations.

  16. The semantics of Chemical Markup Language (CML): dictionaries and conventions

    E-Print Network [OSTI]

    Murray-Rust, Peter; Townsend, Joseph A; Adams, Sam; Phadungsukanan, Weerapong; Thomas, Jens

    2011-07-04T23:59:59.000Z

    of Chemistry, Lensfield Road, Cambridge CB2 1EW b Department of Chemical Engineering, Pembroke Street, Cambridge CB2 3RA c STFC Daresbury Laboratory, Daresbury Science and Innovation Campus, Warrington WA4 4AD *pm286@cam.ac.uk Abstract The semantic... scientific units. All conventions, dictionaries and dictionary elements are identifiable and addressable through unique URIs. Introduction From an early stage, Chemical Markup Language (CML) was designed so that it could accommodate an indefinitely...

  17. Computational Modeling of Conventionally Reinforced Concrete Coupling Beams

    E-Print Network [OSTI]

    Shastri, Ajay Seshadri

    2012-02-14T23:59:59.000Z

    .20. Stress Distribution Showing the Formation of the Compression Strut.........99 Fig. 6.1. Section and Reinforcement Details for Specimen NR4 (Bristowe 2000)...101 Fig. 6.2. Test Setup for the Coupling Beams (Bristowe 2000... research on reinforced concrete coupling beams. Various types of failures observed in coupling beam tests are discussed in this section including the following: 14 ? Shear compression (SC): This failure is usually seen in conventionally...

  18. Conventional armed forces in Europe: Technology scenario development

    SciTech Connect (OSTI)

    Houser, G.M.

    1990-07-01T23:59:59.000Z

    In January 1986, the Soviet Union's Mikhail Gorbachev proposed elimination of all nuclear weapons by the year 2000. In April of that year, Mr. Gorbachev proposed substantial reductions of conventional weapons in Europe, from the Atlantic Ocean to the Ural Mountains, including reductions in operational-tactical nuclear weapons. In May 1986, the North Atlantic Treaty Organization (NATO) responded with the Brussels Declaration on Conventional Arms Control,'' which indicated readiness to open East/West discussions on establishing a mandate for negotiating conventional arms control throughout Europe. The Group of 23,'' which met in Vienna beginning in February 1987, concluded the meeting in January 1989 with a mandate for the Conventional Armed Forced in Europe (CFE) negotiations. On 6 March 1989, CFE talks began, and these talks have continued through six rounds (as of April 1990). Although US President George Bush, on 30 May 1989, called for agreement within six months to a year, and the Malta meeting of December 1989 called for completion of a CFE agreement by the end of 1990, much remains to be negotiated. This report provides three types of information. First, treaty provisions brought to the table by both sides are compared. Second, on the basis of these provisions, problem areas for each of the provision elements are postulated and possible scenarios for resolving these problem areas are developed. Third, the scenarios are used as requirements for tasks assigned program elements for possible US implementation of a CFE treaty. As progress is achieved during the negotiations, this report could be updated, as necessary, in each of the areas to provide a continuing systematic basis for program implementation and technology development. 8 refs.

  19. Side-by-side evaluation of a stressed-skin insulated-core panel house and a conventional stud-frame house. Final report

    SciTech Connect (OSTI)

    Rudd, A.; Chandra, S.

    1994-01-14T23:59:59.000Z

    Side-by-side energy testing and monitoring was conducted on two houses in Louisville, KY between January--March 1993. Both houses were identical except that one house was constructed with conventional US 2 by 4 studs and a truss roof while the other house was constructed with stress-skin insulated core panels for the walls and second floor ceiling. Air-tightness testing included fan pressurization by blower door, hour long tracer tests using sulphur hexafluoride, and two-week long time-averaged tests using perfluorocarbon tracers. An average of all the air-tightness test results showed the SSIC panel house to have 22 percent less air infiltration than the frame house. Air-tightness testing resulted in a recommendation that both houses have a fresh air ventilation system installed to provide 0.35 air changes per hour continuously. Thermal insulation quality testing was by infrared imaging. Pressure differential testing resulted in recommendations to use sealed combustion appliances, and to allow for more return air flow from closed rooms. This can be accomplished by separate return ducts or transfer ducts which simply connect closed rooms to the main body with a short duct. The SSIC house UA was lower in both cases. By measurement, co-heating tests showed the SSIC panel house total UA to be 12 percent lower than the frame house. Short-term energy monitoring was also conducted for the two houses. A 17 day period of electric heating and a 14 day period of gas furnace heating was evaluated. Monitoring results showed energy savings for the panel house to be 12 percent during electric heating and 15 percent during gas heating. A comparison of the two monitoring periods showed that the lumped efficiency of the gas furnace and air distribution system for both houses was close to 80 percent. Simple regression models using Typical Meteorological Year weather data gave a preliminary prediction of seasonal energy savings between 14 and 20 percent.

  20. Generalized Ginzburg-Landau models for non-conventional superconductors

    E-Print Network [OSTI]

    S. Esposito; G. Salesi

    2009-06-20T23:59:59.000Z

    We review some recent extensions of the Ginzburg-Landau model able to describe several properties of non-conventional superconductors. In the first extension, s-wave superconductors endowed with two different critical temperatures are considered, their main thermodynamical and magnetic properties being calculated and discussed. Instead in the second extension we describe spin-triplet superconductivity (with a single critical temperature), studying in detail the main predicted physical properties. A thorough discussion of the peculiar predictions of our models and their physical consequences is as well performed.

  1. Conventional Hydropower Technologies, Wind And Water Power Program (WWPP)

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 1112011AT&T, Inc.'sEnergyTexas1.SpaceFluorControls andCONVENTIONAL ENERGY (OIL, GAS

  2. Atlantic City Convention Center Solar Power Plant | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to:EzfeedflagBiomass Conversions Inc Jump to: navigation, search Name: Atlantic BiomassConvention

  3. Alternative Fuels Data Center: Conventional Natural Gas Production

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625govInstrumentstdmadapInactiveVisiting the TWP TWP RelatedCellulase C.Tier 2North Carolina for MoreFuelsConventional

  4. Pushing towards the ET sensitivity using 'conventional' technology

    E-Print Network [OSTI]

    Stefan Hild; Simon Chelkowski; Andreas Freise

    2008-11-24T23:59:59.000Z

    Recently, the design study `Einstein gravitational wave Telescope' (ET) has been funded within the European FP7 framework. The ambitious goal of this project is to provide a conceptual design of a detector with a hundred times better sensitivity than currently operating instruments. It is expected that this will require the development and implementation of new technologies, which go beyond the concepts employed for the first and second detector generations. However, it is a very interesting and educational exercise to imagine a Michelson interferometer in which conventional technologies have been pushed to - or maybe beyond - their limits to reach the envisaged sensitivity for the Einstein Telescope. In this document we present a first sketchy analysis of what modifications and improvements are necessary to go, step-by-step, from second generation gravitational wave detectors to the Einstein Telescope.

  5. Feasibility of Thermoelectrics for Waste Heat Recovery in Conventional Vehicles

    SciTech Connect (OSTI)

    Smith, K.; Thornton, M.

    2009-04-01T23:59:59.000Z

    Thermoelectric (TE) generators convert heat directly into electricity when a temperature gradient is applied across junctions of two dissimilar metals. The devices could increase the fuel economy of conventional vehicles by recapturing part of the waste heat from engine exhaust and generating electricity to power accessory loads. A simple vehicle and engine waste heat model showed that a Class 8 truck presents the least challenging requirements for TE system efficiency, mass, and cost; these trucks have a fairly high amount of exhaust waste heat, have low mass sensitivity, and travel many miles per year. These factors help maximize fuel savings and economic benefits. A driving/duty cycle analysis shows strong sensitivity of waste heat, and thus TE system electrical output, to vehicle speed and driving cycle. With a typical alternator, a TE system could allow electrification of 8%-15% of a Class 8 truck's accessories for 2%-3% fuel savings. More research should reduce system cost and improve economics.

  6. CBTL Design Case Summary Conventional Feedstock Supply System - Woody

    SciTech Connect (OSTI)

    Christopher T. Wright; Erin M. Searcy

    2012-02-01T23:59:59.000Z

    A conventional woody feedstock design has been developed that represents supply system technologies, costs, and logistics that are achievable today for supplying woody biomass as a blendstock with coal for energy production. Efforts are made to identify bottlenecks and optimize the efficiency and capacities of this supply system, within the constraints and consideration of existing local feedstock supplies, equipment, and permitting requirements. The feedstock supply system logistics operations encompass all of the activities necessary to move woody biomass from the production location to the conversion reactor ready for blending and insertion. This supply system includes operations that are currently available such that costs and logistics are reasonable and reliable. The system modeled for this research project includes the use of the slash stream since it is a more conservative analysis and represents the material actually used in the experimental part of the project.

  7. CBTL Design Case Summary Conventional Feedstock Supply System - Herbaceous

    SciTech Connect (OSTI)

    Christopher T. Wright; Erin M. Searcy

    2012-02-01T23:59:59.000Z

    A conventional bale feedstock design has been established that represents supply system technologies, costs, and logistics that are achievable today for supplying herbaceous feedstocks as a blendstock with coal for energy production. Efforts are made to identify bottlenecks and optimize the efficiency and capacities of this supply system, within the constraints of existing local feedstock supplies, equipment, and permitting requirements. The feedstock supply system logistics operations encompass all of the activities necessary to move herbaceous biomass feedstock from the production location to the conversion reactor ready for blending and insertion. This supply system includes operations that are currently available such that costs and logistics are reasonable and reliable. The system modeled for this research project includes the uses of field-dried corn stover or switchgrass as a feedstock to annually supply an 800,000 DM ton conversion facility.

  8. Assessing performance : an analytical framework for the San Jos McEnery Convention Center

    E-Print Network [OSTI]

    Lee, Kai-yan, M.C.P. Massachusetts Institute of Technology

    2007-01-01T23:59:59.000Z

    This study first outlines three major factors that limit the assessments of convention centers: high uncertainty in the convention industry, complex institutional structures and operational priorities, and plethora of ...

  9. Rhetoric and heresthetic in the Mississippi Freedom Party controversy at the 1964 Democratic Convention

    E-Print Network [OSTI]

    Battaglia, Adria

    2005-11-01T23:59:59.000Z

    Democratic Convention. Specifically, the focus is on the rhetorical discourse presented by the members of the Mississippi Freedom Democratic Party, Fannie Lou Hamer in particular, at the Credentials Committee two days before the onset of the actual Convention...

  10. Fact #765: February 4, 2013 EPA's Top 10 Conventionally-Fueled...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    5: February 4, 2013 EPA's Top 10 Conventionally-Fueled Vehicles for Model Year 2013 Fact 765: February 4, 2013 EPA's Top 10 Conventionally-Fueled Vehicles for Model Year 2013 For...

  11. Calibration and data reduction algorithms for non-conventional multi-hole pressure probes

    E-Print Network [OSTI]

    Ramakrishnan, Vijay

    2004-09-30T23:59:59.000Z

    This thesis presents the development of calibration and data-reduction algorithms for non-conventional multi-hole pressure probes. The algorithms that have been developed for conventional 5- and 7-hole probes are not optimal ...

  12. On-Site Wastewater Treatment Systems: Conventional Septic Tank/Drain Field

    E-Print Network [OSTI]

    Lesikar, Bruce J.

    1999-09-06T23:59:59.000Z

    Conventional septic systems have traditionally been the most commonly used technology for treating wastewater. This publication explains the advantages and disadvantages of conventional septic tank/drain fields, as well as estimated costs...

  13. Letter box line blackener for the HDTV/conventional-analog hybrid system

    DOE Patents [OSTI]

    Wysocki, Frederick J.; Nickel, George H.

    2006-07-18T23:59:59.000Z

    A blackener for letter box lines associated with a HDTV/conventional-analog hybrid television transmission where the blackener counts horizontal sync pulses contained in the HDTV/conventional-analog hybrid television transmission and determines when the HDTV/conventional-analog hybrid television transmission is in letter-box lines: if it is, then the blackener sends substitute black signal to an output; and if it is not, then the blackener sends the HDTV/conventional-analog hybrid television transmission to the output.

  14. Creating and Implementing a Regularized Monitoring and EnforcementSystem for China's Mandatory Standards and Energy Information Label forAppliances

    SciTech Connect (OSTI)

    Lin, Jiang

    2007-03-01T23:59:59.000Z

    China has developed a comprehensive program of energy efficiency standards and labels for household appliances. In 1989, China first launched its minimum energy performance standards (MEPS), which are now applied to an extensive list of products. In 1998, China launched a voluntary energy endorsement label, which has grown to cover both energy-saving and water-saving products. And, in 2005, China launched a mandatory energy information label that initially covered two products. CLASP has assisted China in developing 11 minimum energy performance standards (MEPS) for 9 products and endorsement labels for 11 products including: refrigerators; air conditioners; televisions; printers; computers; monitors; fax machines; copiers; DVD/VCD players; external power supplies; and set-top boxes. CLASP has also assisted China in the development of the mandatory energy information label. Increasingly, attention is being placed on maximum energy savings from China's standards and labeling (S&L) efforts in order to meet the recently announced goal of reducing China's energy intensity by 20 percent by 2010 with an interim objective of 4 percent in 2006. China's mandatory standards system is heavily focused on the technical requirements for efficiency performance, but historically, it has lacked administrative and personnel capacity to undertake monitoring and enforcement of these legally binding standards. Similarly, resources for monitoring and enforcement have been quite limited. As a consequence, compliance to both the mandatory standards and the mandatory energy information label is uneven with the potential and likely result of lost energy savings. Thus, a major area for improvement, which could significantly increase overall energy savings, is the creation and implementation of a regularized monitoring system for tracking the compliance to, and enforcement of, mandatory standards and the energy information label in China. CLASP has been working with the China National Institute of Standardization (CNIS), the China Administration for Quality, Supervision, Inspection and Quarantine (AQSIQ) and relevant stakeholders in the industry to develop a stronger system of monitoring and enforcement. In November 2005, CNIS and LBNL (a CLASP implementing partner) with funding from the Energy Foundation jointly organized an international workshop to present the international best practices in S&L monitoring and enforcement. Currently, CNIS is developing a guideline for monitoring and enforcement for appliance standards. With support from METI, CLASP has been able to expand the on-going collaboration with CNIS to include enforcement needs for the mandatory energy information label and to accelerate the progress of the project to develop a more robust monitoring and enforcement for S&L programs in China. This expanded effort has included: (1) Holding an enforcement and monitoring roadmap planning workshop with key S&L stakeholders; (2) Interviews with S&L stakeholders on the need and scope of national compliance tests; (3) Research on past enforcement activities; (4) An analysis of compliance data from the mandatory energy information labeling program; (5) Interviews with stakeholders on the need and scope of testing infrastructure; and (6) Development of a roadmap for future activities. This report summarizes the findings of these activities and identifies the progress that China is making, and can make, toward developing a stronger system of monitoring and enforcement (M&E). In sum, it outlines a vision of moving forward with more vigorous M&E in China.

  15. Society of Wood Science and Technology Convention 10-12 November 2008, Concepcin, Chile

    E-Print Network [OSTI]

    Society of Wood Science and Technology Convention 10-12 November 2008, Concepción, Chile Global #12;Society of Wood Science and Technology Convention 10-12 November 2008, Concepción, Chile Subjects;Society of Wood Science and Technology Convention 10-12 November 2008, Concepción, Chile Main sources

  16. Visual quality assessment of electrochromic and conventional glazings

    SciTech Connect (OSTI)

    Moeck, M.; Lee, E.S.; Rubin, M.D.; Sullivan, R.; Selkowitz, S.E.

    1996-09-01T23:59:59.000Z

    Variable transmission, ``switchable`` electrochromic glazings are compared to conventional static glazings using computer simulations to assess the daylighting quality of a commercial office environment where paper and computer tasks are performed. RADIANCE simulations were made for a west-facing commercial office space under clear and overcast sky conditions. This visualization tool was used to model different glazing types, to compute luminance and illuminance levels, and to generate a parametric set of photorealistic images of typical interior views at various times of the day and year. Privacy and visual display terminal (VDT) visibility is explored. Electrochromic glazings result in a more consistent glare-free daylit environment compared to their static counterparts. However, if the glazing is controlled to minimize glare or to maintain low interior daylight levels for critical visual tasks (e.g, VDT), occupants may object to the diminished quality of the outdoor view due to its low transmission (Tv = 0.08) during those hours. RADIANCE proved to be a very powerful tool to better understand some of the design tradeoffs of this emerging glazing technology. The ability to draw specific conclusions about the relative value of different technologies or control strategies is limited by the lack of agreed upon criteria or standards for lighting quality and visibility.

  17. Conventional and synthetic aperature processing for airborne ground penetrating radar

    SciTech Connect (OSTI)

    Cameron, R.M. [Airborne Environmental Surveys, Santa Maria, CA (United States); Simkins, W.L.; Brown, R.D. [MSB Technologies, Inc., Rome, NY (United States)

    1994-12-31T23:59:59.000Z

    For the past four years Airborne Environmental Surveys (AES), a Division of Era Aviation, Inc. has used unique and patented airborne Frequency-Modulated, Continuous Wave (FM-CW) radars and processes for detecting and mapping subsurface phenomena. Primary application has focused on the detection of man-made objects in landfills, hazardous waste sites (some of which contain unexploded ordinance), and subsurface plumes of refined free-floating hydrocarbons. Recently, MSB Technologies, Inc. (MSB) has developed a form of synthetic aperture radar processing (SAR), called GPSAR{trademark}, that is tailored especially for the AES radars. Used as an adjunct to more conventional airborne ground-penetrating radar data processing techniques, GPSAR takes advantage of the radars` coherent transmission and produces imagery that is better focused and more accurate in determining an object`s range and true depth. This paper describes the iterative stages of data processing and analysis used with the radars and shows the added advantages that GPSAR processing offers.

  18. Non-conventional passive sensors for monitoring tritium on surfaces

    SciTech Connect (OSTI)

    Gammage, R.B.; Brock, J.L.; Meyer, K.E. [Oak Ridge National Lab., TN (United States). Health Sciences Research Div.

    1995-06-01T23:59:59.000Z

    The authors describe development of small passive, solid-state detectors for in-situ measurements of tritium, or other weak beta-emitting radionuclides, on surfaces. One form of detector operates on the principle of thermally stimulated exoelectron emission (TSEE), the other by discharge of an electret ion chamber (EIC). There are currently two specific types of commercially available detector systems that lend themselves to making surface measurements. One is the thin-film BeO on a graphite disc, and the other is the Teflon EIC. Two other types of TSEE dosimeters (ceramic BeO and carbon doped alumina) are described but lack either a suitable commercially available reader or standardized methods of fabrication. The small size of these detectors allows deployment in locations difficult to access with conventional windowless gas-flow proportional counters. Preliminary testing shows that quantitative measurements are realized with exposure times of 1--10 hours for the TSEE dosimeters (at the DOE release guideline of 5,000 dpm/100 cm{sup 2} for fixed beta contamination). The EIC detectors exhibit an MDA of 26,000 dpm/100 cm{sup 2} for a 24 hour exposure. Both types of integrating device are inexpensive and reusable. Measurements can, therefore, be made that are faster, cheaper, safer, and better than those possible with baseline monitoring technology.

  19. Boron-Lined Multichamber and Conventional Neutron Proportional Counter Tests

    SciTech Connect (OSTI)

    Woodring, Mitchell L.; Ely, James H.; Kouzes, Richard T.; Stromswold, David C.

    2010-09-07T23:59:59.000Z

    Radiation portal monitors used for interdiction of illicit materials at borders include highly sensitive neutron detection systems. The main reason for having neutron detection capability is to detect fission neutrons from plutonium. The currently deployed radiation portal monitors (RPMs) from Ludlum and Science Applications International Corporation (SAIC) use neutron detectors based upon 3He-filled gas proportional counters, which are the most common large neutron detector. There is a declining supply of 3He in the world, and thus, methods to reduce the use of this gas in RPMs with minimal changes to the current system designs and sensitivity to cargo-borne neutrons are being investigated. Four technologies have been identified as being currently commercially available, potential alternative neutron detectors to replace the use of 3He in RPMs. These technologies are: 1) Boron trifluoride (BF3)-filled proportional counters, 2) Boron-lined proportional counters, 3) Lithium-loaded glass fibers, and 4) Coated non-scintillating plastic fibers. In addition, a few other companies have detector technologies that might be competitive in the near term as an alternative technology. Reported here are the results of tests of a boron-lined, multichamber proportional counter manufactured by LND, Inc. Also reported are results obtained with an earlier design of conventional, boron-lined, proportional counters from LND. This testing measured the required performance for neutron detection efficiency and gamma-ray rejection capabilities of the detectors.

  20. Technical support document: Energy efficiency standards for consumer products: Room air conditioners, water heaters, direct heating equipment, mobile home furnaces, kitchen ranges and ovens, pool heaters, fluorescent lamp ballasts and television sets. Volume 3, Water heaters, pool heaters, direct heating equipment, and mobile home furnaces

    SciTech Connect (OSTI)

    Not Available

    1993-11-01T23:59:59.000Z

    This is Volume 3 in a series of documents on energy efficiency of consumer products. This volume discusses energy efficiency of water heaters. Water heaters are defined by NAECA as products that utilize oil, gas, or electricity to heat potable water for use outside the heater upon demand. These are major appliances, which use a large portion (18% on average) of total energy consumed per household (1). They differ from most other appliances in that they are usually installed in obscure locations as part of the plumbing and are ignored until they fail. Residential water heaters are capable of heating water up to 180{degrees}F, although the setpoints are usually set lower.

  1. In-Cylinder Imaging of Conventional and Advanced, Low-Temperature...

    Broader source: Energy.gov (indexed) [DOE]

    Cylinder Imaging of Conventional and Advanced, Low-Temperature Diesel Combustion Sponsor: USDOE Office of FreedomCAR and Vehicle Technologies Program Managers: Gurpreet Singh,...

  2. CONSULTANT REPORT APPLIANCE MARKET SURVEY

    E-Print Network [OSTI]

    found at retail/wholesale stores, Internet sites, and in catalogs. This report delineates the degree.....................................................................................................................5 Retail/Wholesale Store Surveys ..........................................................................................................5 Retail/Wholesale Store Site Selection ..................................

  3. Efficiency Maine Appliance Rebate Program

    Broader source: Energy.gov [DOE]

    Efficiency Maine offers rebates for the purchase of ENERGY STAR certified room air purifiers, clothes washers, and dehumidifiers. Purchases must be made between November 1, 2014 and June 30, 2015....

  4. Tips: Appliances | Department of Energy

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directed off Energy.gov. Are you sure you want toworldPower 2010 1 TNews & Solar Solar HowDucts Tips:

  5. Appliance Projects | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33Frequently20,000 Russian NuclearandJune 17,Agenda Agenda Agenda4 Image:1Plant |Energy Efficient

  6. Tips: Appliances | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page onYouTube YouTube Note: Since the.pdfBreakingMayDepartmentTest for PumpingThe| Department ofAir Ducts Tips: Air Ducts

  7. Appliance Standards and Building Codes

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny: The Future of1Albuquerque,APPENDIX A: Technical Support Document Program Manager

  8. Evaluation of air toxic emissions from advanced and conventional coal-fired power plants

    SciTech Connect (OSTI)

    Chu, P.; Epstein, M. [Electric Power Research Institute, Palo Alto, CA (United States); Gould, L. [Department of Energy, Pittsburgh, PA (United States); Botros, P. [Department of Energy, Morgantown, WV (United States)

    1995-12-31T23:59:59.000Z

    This paper evaluates the air toxics measurements at three advanced power systems and a base case conventional fossil fuel power plant. The four plants tested include a pressurized fluidized bed combustor, integrated gasification combined cycle, circulating fluidized bed combustor, and a conventional coal-fired plant.

  9. U.S. GEOLOGICAL SURVEY ASSESSMENT MODEL FOR UNDISCOVERED CONVENTIONAL OIL, GAS, AND NGL

    E-Print Network [OSTI]

    Laughlin, Robert B.

    AM-i Chapter AM U.S. GEOLOGICAL SURVEY ASSESSMENT MODEL FOR UNDISCOVERED CONVENTIONAL OIL, GAS Survey (USGS) periodically conducts assessments of the oil, gas, and natural-gas liquids (NGL) resources by the USGS in1998 for undiscovered oil, gas, and NGL resources that reside in conventional accumulations

  10. A threshold area ratio of organic to conventional agriculture causes recurrent pathogen outbreaks in organic agriculture

    E-Print Network [OSTI]

    Kolokolnikov, Theodore

    A threshold area ratio of organic to conventional agriculture causes recurrent pathogen outbreaks in organic agriculture S. Adl a, , D. Iron b , T. Kolokolnikov b a Department of Biology, Dalhousie Fungal spores Organic agriculture Pathogen dispersal Conventional agriculture uses herbicides, pesticides

  11. Geological Attributes from Conventional Well Logs: Relating Rock Types to Depositional Facies in Deepwater Turbidite Reservoirs

    E-Print Network [OSTI]

    Torres-Verdn, Carlos

    SPE 166178 Geological Attributes from Conventional Well Logs: Relating Rock Types to Depositional. The objective of this paper is to quantitatively classify rock and bed types based on conventional well logs to assist facies interpretation and stratigraphic reservoir modeling. We model physical properties and well

  12. DNA decontamination: DNA-ExitusPlus in comparison with conventional reagents

    E-Print Network [OSTI]

    Cai, Long

    DNA decontamination: DNA-ExitusPlus in comparison with conventional reagents Here we present a completely new DNA decontamination reagent DNA-ExitusPlus. In comparison with conventional products, DNA solutions for effective DNA decontamination. DNA decontamination reagents use three different molecular prin

  13. Supercomputers Take a Cue From Microwave Ovens

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    many different licenses for different applications," says Shalf. "Just as the consumer electronics chip designers choose a set of processor characteristics appropriate to the...

  14. Solar Pizza Oven Box k - 6

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33Frequently AskedEnergyIssues DOE's Nuclear EnergySmart Metersof Energy LEDMarketReady to

  15. Supercomputers Take a Cue From Microwave Ovens

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What'sis Taking Over Our InstagramStructure of All-Polymer. .Energy8 CareerSupercomputerSupercomputers

  16. Making a Solar Oven | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't YourTransport(FactDepartment ofLetterEconomyDr.Energy Maine

  17. ONLINE WINE TOURISM MARKETING EFFORTS OF WINERIES AND CONVENTION AND VISITORS BUREAUS IN TEXAS

    E-Print Network [OSTI]

    Rasch, Leslie

    2008-08-19T23:59:59.000Z

    wineries conduct online marketing of wine tourism through their own establishments as well as in a regional context. A specific focus was placed on indications of collaborative wine tourism marketing practices on winery websites. Additionally, Convention...

  18. Are cap-and-trade programs more environmentally effective than conventional regulation?

    E-Print Network [OSTI]

    Ellerman, A. Denny

    2003-01-01T23:59:59.000Z

    This paper considers the evidence and possible reasons that cap-and-trade programs are more effective in meeting environmental objectives than conventional prescriptive regulation. The evidence is based mostly, but not ...

  19. Table 9. U.S. Refiner Conventional Motor Gasoline Volumes by...

    U.S. Energy Information Administration (EIA) Indexed Site

    5.7 5.9 4.4 12.9 NA 17.3 See footnotes at end of table. 9. U.S. Refiner Conventional Motor Gasoline Volumes by Grade and Sales Type 18 Energy Information Administration ...

  20. Table 8. U.S. Refiner Conventional Motor Gasoline Prices by...

    U.S. Energy Information Administration (EIA) Indexed Site

    87.4 86.9 78.3 68.5 W 70.8 See footnotes at end of table. 8. U.S. Refiner Conventional Motor Gasoline Prices by Grade and Sales Type 16 Energy Information Administration ...

  1. Table 8. U.S. Refiner Conventional Motor Gasoline Prices by...

    U.S. Energy Information Administration (EIA) Indexed Site

    88.4 87.8 80.1 70.0 NA 72.6 See footnotes at end of table. 8. U.S. Refiner Conventional Motor Gasoline Prices by Grade and Sales Type 16 Energy Information Administration ...

  2. Table 9. U.S. Refiner Conventional Motor Gasoline Volumes by...

    U.S. Energy Information Administration (EIA) Indexed Site

    5.7 5.9 3.9 12.7 W 16.6 See footnotes at end of table. 9. U.S. Refiner Conventional Motor Gasoline Volumes by Grade and Sales Type 18 Energy Information Administration ...

  3. Equivalence of Conventionally-Derived and Parthenote-Derived Human Embryonic Stem Cells

    E-Print Network [OSTI]

    2011-01-01T23:59:59.000Z

    Equivalence of Conventionally-Derived and Parthenote-6 | Issue 1 | e14499 Equivalence of hESC and phESC Figure 4.to determine points of equivalence and differences between

  4. The Coils of the Anaconda: America's First Conventional Battle in Afghanistan

    E-Print Network [OSTI]

    Grau, Les

    2009-05-04T23:59:59.000Z

    Operation Anaconda was America's first conventional battle in Afghanistan. America's first battles did not always turn out as victories. Bunker Hill, Bull Run, Kasserine Pass, Task Force Smith, the Ia Drang Valley-all were ...

  5. Public participation in environmental impact assessment-implementing the Aarhus Convention

    SciTech Connect (OSTI)

    Hartley, Nicola [EIA Centre, School of Environment and Development, University of Manchester, Oxford Road, Manchester M13 9PL (United Kingdom); Wood, Christopher [EIA Centre, School of Environment and Development, University of Manchester, Oxford Road, Manchester M13 9PL (United Kingdom)]. E-mail: chris.wood@manchester.ac.uk

    2005-05-15T23:59:59.000Z

    This article explores the nature of public participation in the environmental impact assessment (EIA) process in the context of the potential integration of the Aarhus Convention principles into the UK EIA system. Although the Convention advocates 'early' and 'effective' participation, these terms remain undefined and questions persist about exactly how to implement the Aarhus principles. Ten practice evaluation criteria derived from the Aarhus Convention are used to analyse the public participation procedures used in four UK waste disposal EIA case studies. The paper reports the extent to which the practice evaluation criteria were fulfilled, explores the types and effectiveness of the participation methods used in the EIAs, and highlights some of the key barriers that appear to impede the execution of 'early' and 'effective' participation programmes. It concludes that the Aarhus Convention will undoubtedly lead to a strengthening of participation procedures but that the level of improvement secured will depend upon how its ideals are interpreted and incorporated into legislation and practice.

  6. Evaluating the Conventional Wisdom in Clone Removal: A Genealogy-based Empirical Study

    E-Print Network [OSTI]

    Schneider, Kevin A.

    Evaluating the Conventional Wisdom in Clone Removal: A Genealogy-based Empirical Study Minhaz F study based on the clone genealogies from a significant num- ber of releases of six software systems

  7. Economic costs of conventional surface-water treatment: A case study of the Mcallen northwest facility

    E-Print Network [OSTI]

    Rogers, Callie Sue

    2009-05-15T23:59:59.000Z

    Conventional water treatment facilities are the norm for producing potable water for U.S. metropolitan areas. Rapidly-growing urban populations, competing demands for water, imperfect water markets, and uncertainty of future water supplies...

  8. A comparative study of conventionally sintered and microwave sintered nickel zinc ferrite

    SciTech Connect (OSTI)

    Rani, Rekha [Electroceramics Research Lab, GVM Girls College, Sonepat-131001, India and School of Physics and Materials Science, Thapar University, Patiala-147004 (India); Juneja, J. K. [Department of Physics, Hindu College, Sonepat-131001 (India); Raina, K. K. [School of Physics and Materials Science, Thapar University, Patiala-147004 (India); Kotnala, R. K. [National Physical Laboratory, New Delhi -110012 (India); Prakash, Chandra, E-mail: cprakash2014@gmail.com [Solid State Physics Laboratory, Timarpur, Delhi - 110054 (India)

    2014-04-24T23:59:59.000Z

    For the present work, nickel zinc ferrite having compositional formula Ni{sub 0.8}Zn{sub 0.2}Fe{sub 2}O{sub 4} was synthesized by conventional solid state method and sintered in conventional and microwave furnaces. Pellets were sintered with very short soaking time of 10 min at 1150 C in microwave furnace whereas 4 hrs of soaking time was selected for conventional sintering at 1200 C. Phase formation was confirmed by X-ray diffraction analysis technique. Scanning electron micrographs were taken for microstructural study. Dielectric properties were studied as a function of temperature. To study magnetic behavior, M-H hysteresis loops were recorded for both samples. It is observed that microwave sintered sample could obtain comparable properties to the conventionally sintered one in lesser soaking time at lower sintering temperature.

  9. Analysis of conventional and plutonium recycle unit-assemblies for the Yankee (Rowe) PWR

    E-Print Network [OSTI]

    Mertens, Paul Gustaaf

    1971-01-01T23:59:59.000Z

    An analysis and comparison of Unit Conventional UO2 Fuel-Assemblies and proposed Plutonium Recycle Fuel Assemblies for the Yankee (Rowe) Reactor has been made. The influence of spectral effects, at the watergaps -and ...

  10. 2014-02-06 Issuance: Energy Conservation Standards for Residential Conventional Cooking Products; Request for Information

    Broader source: Energy.gov [DOE]

    This document is a pre-publication Federal Register request for information and notice of document availability regarding energy conservation standards for residential conventional cooking products, as issued by the Deputy Assistant Secretary for Energy Efficiency on February 6, 2014.

  11. Economie Sociale et Solidaire et Economie des Conventions Franck Bessis1

    E-Print Network [OSTI]

    Paris-Sud XI, Universit de

    1 Economie Sociale et Solidaire et Economie des Conventions Franck Bessis1 et Isabelle-mail : franck.bessis@univ-lyon2.fr 2 Chercheure post-doctorante, boursire du Fonds national suisse pour la

  12. Fabrication of masters for microfluidic devices using conventional printed circuit technology

    E-Print Network [OSTI]

    Sudarsan, Arjun Penubolu

    2004-09-30T23:59:59.000Z

    are typically produced as replicas of a rigid mold or master incorporating a negative image of the desired structures. The negative image is typically constructed from either thick photoresists or etched silicon substrates using conventional photolithographic...

  13. Biofiltration vs. conventional activated sludge plants: what about priority and emerging1 pollutants removal?2

    E-Print Network [OSTI]

    Paris-Sud XI, Universit de

    performances of two complete wastewater treatment plants (WWTP) for all priority19 substances listed solids elimination and possible coagulant impact on soluble compounds. For biological27 treatments; biofiltration; conventional activated sludge; physico-chemical lamellar settling;42 wastewater treatment plant

  14. Comparison of conventional freezing and vitrification for cryopreservation of equine embryos

    E-Print Network [OSTI]

    Bruemmer, Jason Edward

    1991-01-01T23:59:59.000Z

    COMPARISON OF CONVENTIONAL FREEZING AND VITRIFICATION FOR CRYOPRESERVATION OF EQUINE EMBRYOS A Thesis by JASON EDWARD BRUEMMER Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment of the requirements... for the degree of MASTER OF SCIENCE May 1991 Major Subject: Physiology of Reproduction COMPARISON OF CONVENTIONAL FREEZING AND VITRIFICATION FOR CRYOPRESERVATION OF EQUINE EMBRYOS A Thesis by JASON EDWARD BRUEMMER Approved as to style and content by: J...

  15. A review of ash in conventional and advanced coal-based power systems

    SciTech Connect (OSTI)

    Holcombe, N.T.

    1995-12-31T23:59:59.000Z

    Process conditions are briefly described for conventional and advanced power systems. The advanced systems include both combustion and gasification processes. We discuss problems in coal-based power generation systems, including deposition, agglomeration and sintering of bed materials, and ash attack are discussed. We also discuss methods of mitigating ash problems and anticipated changes anticipated in ash use by converting from conventional to advanced systems.

  16. Modelling the costs of non-conventional oil: A case study of Canadian bitumen

    E-Print Network [OSTI]

    Mjean, A; Hope, Chris

    in conventional deposits. The longer- term problem of climate change arises from the fuller and longer-term use of coal, and of unconventional deposits such as heavy oils, tar sands and oil shales. (Grubb, 2001) As conventional oil becomes scarcer, the transport... , it is not mobile at reservoir conditions, (Cupcic, 2003): density Oil shale is a fine-grained sedimentary rock rich in organic matter, (USGS, 2005): oil shales contain kerogen, which is a solid, insoluble organic material...

  17. Hydraulic Hybrid and Conventional Parcel Delivery Vehicles' Measured Laboratory Fuel Economy on Targeted Drive Cycles

    SciTech Connect (OSTI)

    Lammert, M. P.; Burton, J.; Sindler, P.; Duran, A.

    2014-10-01T23:59:59.000Z

    This research project compares laboratory-measured fuel economy of a medium-duty diesel powered hydraulic hybrid vehicle drivetrain to both a conventional diesel drivetrain and a conventional gasoline drivetrain in a typical commercial parcel delivery application. Vehicles in this study included a model year 2012 Freightliner P100H hybrid compared to a 2012 conventional gasoline P100 and a 2012 conventional diesel parcel delivery van of similar specifications. Drive cycle analysis of 484 days of hybrid parcel delivery van commercial operation from multiple vehicles was used to select three standard laboratory drive cycles as well as to create a custom representative cycle. These four cycles encompass and bracket the range of real world in-use data observed in Baltimore United Parcel Service operations. The NY Composite cycle, the City Suburban Heavy Vehicle Cycle cycle, and the California Air Resources Board Heavy Heavy-Duty Diesel Truck (HHDDT) cycle as well as a custom Baltimore parcel delivery cycle were tested at the National Renewable Energy Laboratory's Renewable Fuels and Lubricants Laboratory. Fuel consumption was measured and analyzed for all three vehicles. Vehicle laboratory results are compared on the basis of fuel economy. The hydraulic hybrid parcel delivery van demonstrated 19%-52% better fuel economy than the conventional diesel parcel delivery van and 30%-56% better fuel economy than the conventional gasoline parcel delivery van on cycles other than the highway-oriented HHDDT cycle.

  18. UBC Social Ecological Economic Development Studies (SEEDS) Student Report Sustainable alternatives to traditional plastics and conventional plastic waste

    E-Print Network [OSTI]

    to traditional plastics and conventional plastic waste management in the agricultural setting of the UBC Farm alternatives to traditional plastics and conventional plastic waste management in the agricultural setting ................................................................................................................. 9 Agricultural plastics

  19. Cost comparison of solar detoxification with conventional alternatives for the destruction of trichloroethylene

    SciTech Connect (OSTI)

    Glatzmaier, G.C.

    1991-12-01T23:59:59.000Z

    The purpose of this analysis is to compare the cost of solar waste detoxification processes with conventional alternatives for the treatment of trichloroethylene (TCE) in air. The solar processes that were evaluated are high flux photothermal oxidation (PHOTOX), high flux thermal catalytic reforming (SOLTOX), and low flux photocatalytic oxidation (PHOCAT). The high flux processes, PHOTOX and SOLTOX, were based on dish concentrator technology. The low flux photocatalytic process was based on parabolic trough concentrating technology. The conventional alternatives are thermal oxidation, thermal catalytic oxidation, off-site carbon regeneration, and on-site solvent recovery. Analysis of the seven processes showed PHOCAT to be the most economical treatment method. PHOTOX showed slightly better economics relative to SOLTOX. Both were competitive, with the best conventional destruction process, thermal oxidation. Off-site carbon regeneration was the most expensive treatment method. 9 refs., 7 figs.

  20. Monitoring commercial conventional facilities control with the APS control system: The Metasys-to-EPICS interface

    SciTech Connect (OSTI)

    Nawrocki, G.J.; Seaver, C.L.; Kowalkowski, J.B.

    1995-12-31T23:59:59.000Z

    As controls needs at the Advanced Photon Source matured from an installation phase to an operational phase, the need to monitor the existing conventional facilities control system with the EPICS-based accelerator control system was realized. This existing conventional facilities control network is based on a proprietary system from Johnson Controls called Metasys. Initially read-only monitoring of the Metasys parameters will be provided; however, the ability for possible future expansion to full control is available. This paper describes a method of using commercially available hardware and existing EPICS software as a bridge between the Metasys and EPICS control systems.

  1. NV Energy Solar Integration Study: Cycling and Movements of Conventional Generators for Balancing Services

    SciTech Connect (OSTI)

    Diao, Ruisheng; Lu, Shuai; Etingov, Pavel V.; Ma, Jian; Makarov, Yuri V.; Guo, Xinxin

    2011-07-01T23:59:59.000Z

    With an increasing penetration level of solar power in the southern Nevada system, the impact of solar on system operations needs to be carefully studied from various perspectives. Qualitatively, it is expected that the balancing requirements to compensate for solar power variability will be larger in magnitude; meanwhile, generators providing load following and regulation services will be moved up or down more frequently. One of the most important tasks is to quantitatively evaluate the cycling and movements of conventional generators with solar power at different penetration levels. This study is focused on developing effective methodologies for this goal and providing a basis for evaluating the wear and tear of the conventional generators

  2. Life Cycle GHG Emissions from Conventional Natural Gas Power Generation: Systematic Review and Harmonization (Presentation)

    SciTech Connect (OSTI)

    Heath, G.; O'Donoughue, P.; Whitaker, M.

    2012-12-01T23:59:59.000Z

    This research provides a systematic review and harmonization of the life cycle assessment (LCA) literature of electricity generated from conventionally produced natural gas. We focus on estimates of greenhouse gases (GHGs) emitted in the life cycle of electricity generation from conventionally produced natural gas in combustion turbines (NGCT) and combined-cycle (NGCC) systems. A process we term "harmonization" was employed to align several common system performance parameters and assumptions to better allow for cross-study comparisons, with the goal of clarifying central tendency and reducing variability in estimates of life cycle GHG emissions. This presentation summarizes preliminary results.

  3. ,"U.S. Conventional Gasoline Refiner Sales Volumes"

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghurajiConventional Gasoline Sales to End Users, Total Refiner SalesConventional Gasoline Refiner Sales

  4. ,"U.S. Conventional, Average Refiner Gasoline Prices"

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghurajiConventional Gasoline Sales to End Users, Total Refiner SalesConventional Gasoline Refiner

  5. Inter American Conference on Non-Conventional Materials and Technologies in Ecological and Sustainable Construction

    E-Print Network [OSTI]

    Zornberg, Jorge G.

    draining soils for reinforced soil construction have been [2]: Build up of pore pressure may reduceInter American Conference on Non-Conventional Materials and Technologies in Ecological and Sustainable Construction IAC-NOCMAT 2005 - Rio Rio de Janeiro - Brazil, November 11 15th, 2005 GEOSYNTHETIC

  6. Wind Powering America Fact Sheet Series 1 Wind energy is more expensive than conventional energy.

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    Wind Powering America Fact Sheet Series 1 Wind energy is more expensive than conventional energy. Wind's variability does increase the day-to-day and minute-to- minute operating costs of a utility system because the wind variations do affect the operation of other plants. But investigations by utility

  7. Media landscape in Twitter: A world of new conventions and political diversity Meeyoung Cha

    E-Print Network [OSTI]

    Gummadi, Krishna P.

    Media landscape in Twitter: A world of new conventions and political diversity Jisun An Meeyoung. This great excitement has led to a number of studies that seek to understand the new social media. Studies study of the media landscape of Twitter. We use public data on whom follows who to uncover common

  8. CAD BASED DRILLING USING CONVENTIONAL TWIST DRILLS PANAGIOTIS KYRATSIS*, Dr. Ing. NIKOLAOS BILALIS**, Dr. VASILIS

    E-Print Network [OSTI]

    Aristomenis, Antoniadis

    CAD BASED DRILLING USING CONVENTIONAL TWIST DRILLS PANAGIOTIS KYRATSIS*, Dr. Ing. NIKOLAOS BILALIS, antoniadis@dpem.tuc.gr Abstract: Twist drills are geometrically complex tools, which are used in industry and experimental approaches for drilling simulation. The present paper is based on the ground that the increasing

  9. WHY CONVENTIONAL TOOLS FOR POLICY ANALYSIS ARE OFTEN INADEQUATE FOR PROBLEMS OF GLOBAL CHANGE

    E-Print Network [OSTI]

    Risbey, James S.

    WHY CONVENTIONAL TOOLS FOR POLICY ANALYSIS ARE OFTEN INADEQUATE FOR PROBLEMS OF GLOBAL CHANGE of tools for quantitative policy analysis. As policy analysts have turned to the consideration of climate and other problems of global change, they have found it natural to employ such now standard tools as utility

  10. Faith, Politics, and the Misguided Mission of the Southern Baptist Convention

    E-Print Network [OSTI]

    Wood, Dustin Alan

    2013-04-01T23:59:59.000Z

    in the Southern United States. Citing these perceived problems, they recommended a denominational name change of sorts. Voting on the proposed name change?a descriptor ?Great Commission Baptists??was placed on the agenda for the 2012 Convention. If passed...

  11. 450 mm dual frequency capacitively coupled plasma sources: Conventional, graded, and segmented electrodes

    E-Print Network [OSTI]

    Kushner, Mark

    450 mm dual frequency capacitively coupled plasma sources: Conventional, graded, and segmented fabrication will soon transition from 300 to 450 mm at a time when excitation frequencies for capacitively of processing. The increase in diameter to 450 mm is likely to exacerbate these effects, perhaps requiring

  12. Conventional and 360 degree electron tomography of a micro-crystalline silicon solar cell

    E-Print Network [OSTI]

    Dunin-Borkowski, Rafal E.

    for use as the active absorber layer in low cost solar cells [1], for which efficiencies higher than 8Conventional and 360 degree electron tomography of a micro- crystalline silicon solar cell M thereafter) in micro-crystalline silicon (c-Si:H) solar cell. The limitations of inferring the 3D geometry

  13. Are Organic Foods Safer or Healthier Than Conventional Alternatives? A Systematic Review

    E-Print Network [OSTI]

    Wang, Changlu

    irradiation or chemical food additives and are not grown from genetically modified organisms (6, 8Are Organic Foods Safer or Healthier Than Conventional Alternatives? A Systematic Review Crystal of organic foods are unclear. Purpose: To review evidence comparing the health effects of or- ganic

  14. Advanced Techniques for Reservoir Simulation and Modeling of Non-Conventional Wells

    SciTech Connect (OSTI)

    Durlofsky, Louis J.; Aziz, Khalid

    2001-08-23T23:59:59.000Z

    Research results for the second year of this project on the development of improved modeling techniques for non-conventional (e.g., horizontal, deviated or multilateral) wells were presented. The overall program entails the development of enhanced well modeling and general simulation capabilities. A general formulation for black-oil and compositional reservoir simulation was presented.

  15. Query Plans for Conventional and Temporal Queries Involving Duplicates and Ordering

    E-Print Network [OSTI]

    Snodgrass, Richard T.

    substantially from built- in temporal support in the DBMS. To achieve this, temporal query representation for providing temporal support both via a stand-alone temporal DBMS and via a layer on top of a conventional DBMS. By capturing duplicate removal and retention and order preservation for all queries, as well

  16. August 30-31, 2005 Augusta Towers Hotel and Convention Center

    E-Print Network [OSTI]

    August 30-31, 2005 Augusta Towers Hotel and Convention Center Augusta, GA Sponsored by U.S. Department of Energy Office of Energy Efficiency and Renewable Energy Hydrogen, Fuel Cells, more than 45 researchers and industry experts representing industrial gas and energy companies

  17. Life cycle analysis of lubricants from rape seed oil in comparison to conventional lubricants

    E-Print Network [OSTI]

    G. A. Reinhardt; R. Herbener; S. O. Grtner

    Introduction and procedure Comparing with biomass-derived lubricants, in many cases conventional lubricants turn out to have disadvantages for their environmental impact, especially where losses occur during regular operation (e.g. in chainsaws) or where a leakage leads to immediate emissions into the environment as for agricultural machinery. Bio lubricants are supposed to be environmentally friendly, among other

  18. Technological impact of Non-Conventional Renewable Energy in the Chilean Electricity System

    E-Print Network [OSTI]

    Catholic University of Chile (Universidad Catlica de Chile)

    and determine the evolution of technological diversity variables, costs, CO2 emissions and energy injection mix), investment and operating costs, technological diversity, CO2 emissions and the injected powerTechnological impact of Non-Conventional Renewable Energy in the Chilean Electricity System Juan D

  19. Guidelines for the verification and validation of expert system software and conventional software: Bibliography. Volume 8

    SciTech Connect (OSTI)

    Miller, L.A.; Hayes, J.E.; Mirsky, S.M. [Science Applications International Corp., McLean, VA (United States)

    1995-03-01T23:59:59.000Z

    This volume contains all of the technical references found in Volumes 1-7 concerning the development of guidelines for the verification and validation of expert systems, knowledge-based systems, other AI systems, object-oriented systems, and conventional systems.

  20. SPE 159255-PP Rock Classification from Conventional Well Logs in Hydrocarbon-Bearing

    E-Print Network [OSTI]

    Torres-Verdn, Carlos

    typing method for application in hydrocarbon-bearing shale (specifically source rock) reservoirs using conventional well logs and core data. Source rock reservoirs are known to be highly heterogeneous and often, petrophysical description of source rock reservoirs with well logs has been focused to quantifying rock

  1. EMISSIONS OF NITROUS OXIDE AND METHANE FROM CONVENTIONAL AND ALTERNATIVE FUEL MOTOR VEHICLES

    E-Print Network [OSTI]

    Kammen, Daniel M.

    EMISSIONS OF NITROUS OXIDE AND METHANE FROM CONVENTIONAL AND ALTERNATIVE FUEL MOTOR VEHICLES fuel passenger cars, light-duty trucks, and heavy-duty vehicles. 1. Introduction The use of energy/electric hybrid and fuel cell/electric hybrid drivetrain technologies offers the potential for significant

  2. metry and conventional radiocarbon dating of bulk peat samples from the lowest visually apparent peat

    E-Print Network [OSTI]

    Gillespie, Rosemary

    #12;metry and conventional radiocarbon dating of bulk peat samples from the lowest visually apparent peat horizon in each core. Substantially older radiocarbon ages from organic-rich gytjja (mineral peat- lands throughout the WSL, for a total of 29,350 measurements digitized. (ii) Our own field data

  3. A Comparison of Wind Turbine Load Statistics for Inflow Turbulence Fields based on Conventional

    E-Print Network [OSTI]

    Manuel, Lance

    A Comparison of Wind Turbine Load Statistics for Inflow Turbulence Fields based on Conventional turbine load statistics for design. There are not many published studies that have addressed the issue of such optimal space-time resolution. This study in- vestigates turbine extreme and fatigue load statistics

  4. Scanning Josephson Tunneling Microscopy of Single Crystal Bi2Sr2CaCu2O8+delta with a Conventional Superconducting Tip

    E-Print Network [OSTI]

    Kimura, H.

    2010-01-01T23:59:59.000Z

    +? with a Conventional Superconducting Tip Hikari Kimura,1,2between a conventional superconducting scanning tunnelinginhomogeneity in the superconductivity of BSCCO. The

  5. Profile on Implementation of WHO Framework Convention on Tobacco Control in the South-East Asia Region

    E-Print Network [OSTI]

    WHO

    2012-01-01T23:59:59.000Z

    Profile on Implementation of WHO Framework Convention onOffice for South-East Asia. Profile on Implementation of WHOaccessed 9 May 2011. Profile on Implementation of WHO

  6. Calculation of conventional and prompt lepton fluxes at very high energy

    E-Print Network [OSTI]

    Fedynitch, Anatoli; Gaisser, Thomas K; Riehn, Felix; Stanev, Todor

    2015-01-01T23:59:59.000Z

    An efficient method for calculating inclusive conventional and prompt atmospheric leptons fluxes is presented. The coupled cascade equations are solved numerically by formulating them as matrix equation. The presented approach is very flexible and allows the use of different hadronic interaction models, realistic parametrizations of the primary cosmic-ray flux and the Earth's atmosphere, and a detailed treatment of particle interactions and decays. The power of the developed method is illustrated by calculating lepton flux predictions for a number of different scenarios.

  7. Gasoline-fueled hybrid vs. conventional vehicle emissions and fuel economy.

    SciTech Connect (OSTI)

    Anderson, J.; Bharathan, D.; He, J.; Plotkin, S.; Santini, D.; Vyas, A.

    1999-06-18T23:59:59.000Z

    This paper addresses the relative fuel economy and emissions behavior, both measured and modeled, of technically comparable, contemporary hybrid and conventional vehicles fueled by gasoline, in terms of different driving cycles. Criteria pollutants (hydrocarbons, carbon monoxide, and nitrogen oxides) are discussed, and the potential emissions benefits of designing hybrids for grid connection are briefly considered. In 1997, Toyota estimated that their grid-independent hybrid vehicle would obtain twice the fuel economy of a comparable conventional vehicle on the Japan 10/15 mode driving cycle. This initial result, as well as the fuel economy level (66 mpg), made its way into the U.S. press. Criteria emissions amounting to one-tenth of Japanese standards were cited, and some have interpreted these results to suggest that the grid-independent hybrid can reduce criteria emissions in the U.S. more sharply than can a conventional gasoline vehicle. This paper shows that the potential of contemporary grid-independent hybrid vehicle technology for reducing emissions and fuel consumption under U.S. driving conditions is less than some have inferred. The importance (and difficulty) of doing test and model assessments with comparable driving cycles, comparable emissions control technology, and comparable performance capabilities is emphasized. Compared with comparable-technology conventional vehicles, grid-independent hybrids appear to have no clear criteria pollutant benefits (or disbenefits). (Such benefits are clearly possible with grid-connectable hybrids operating in zero emissions mode.) However, significant reductions in greenhouse gas emissions (i.e., fuel consumption) are possible with hybrid vehicles when they are used to best advantage.

  8. A Rosetta Stone Relating Conventions In Photo-Meson Partial Wave Analyses

    SciTech Connect (OSTI)

    A.M. Sandorfi, B. Dey, A. Sarantsev, L. Tiator, R. Workman

    2012-04-01T23:59:59.000Z

    A new generation of complete experiments in pseudoscalar meson photo-production is being pursued at several laboratories. While new data are emerging, there is some confusion regarding definitions of asymmetries and the conventions used in partial wave analyses (PWA). We present expressions for constructing asymmetries as coordinate-system independent ratios of cross sections, along with the names used for these ratios by different PWA groups.

  9. Domestic conventional natural-gas reserves - can they be increased by the year 2010

    SciTech Connect (OSTI)

    Ahlbrandt, T.S.; Taylor, D.J. (Geological Survey, Denver, CO (United States))

    1993-01-01T23:59:59.000Z

    A review of recent natural-gas studies and supporting data bases suggests that natural-gas reserves and excess productive capacity are declining and remedial action to ensure adequate supplies will require increased drilling of high-quality prospects. Conventional gas resources will remain the dominant source of natural gas through the year 2010, although nonconventional gas sources will increase and competition from coal in the utility sector will remain strong. More than two-thirds of current domestic gas production is coming from wells 11 or fewer years old. There is a need for increased conventional resources to fulfill anticipated increased demand for natural gas, and new concepts, be they new geophysical techniques or looking in lightly explored, deep, or remote areas particularly on Federal lands where most undiscovered conventional gas resources presumably are present, are required to find these resources. Conventional resources discovered during the past decade have initial production rates nearly three times that of unconventional resources developed under tax credit incentives for wells drilled before December 31, 1993. The industry has nearly doubled its efficiency, as measured by reserves found per well, from 1988 to 1991 at a low level of drilling relative to the high level drilling during the early 1980's. Significant reserve growth of old, large gas fields has helped to reduce the rate of decline of gas reserves. However, a developing hypothesis related to the field-growth phenomenon is that younger, smaller fields may grow at a lower rate and for a shorter time span than older, larger fields. This hypothesis may reflect, in part, the important role of new seismic techniques to better define the field size and reserves earlier in the process of gas-field development and thereby result in more accurate estimates of ultimate reserves. 39 refs., 15 figs.

  10. 2014-11-24 Issuance: Test Procedures for Conventional Cooking Products; Supplementary Notice of Proposed Rulemaking

    Broader source: Energy.gov [DOE]

    This document is a pre-publication Federal Register Supplementary Notice of Proposed Rulemaking regarding test procedures for conventional cooking products, as issued by the Deputy Asisstant Secretary for Energy Efficiency. Though it is not intended or expected, should any discrepancy occur between the document posted here and the document published in the Federal Register, the Federal Register publication controls. This document is being made available through the Internet solely as a means to facilitate the public's access to this document.

  11. The Johnson-Clarendon Convention, 1869: the anatomy of a diplomatic failure

    E-Print Network [OSTI]

    Pappas, Joann Frances Van Parys

    1979-01-01T23:59:59.000Z

    - tiations he undertook. The Johnson-Stanley Convention, designed to settle the Alabama claims and signed on November 10, 1868, was un- acceptable to the American government, Negotiat. ions were renewed, and the result was the Johnson-Clarendon Conven... in this work, I alone remain responsible. TABLE OF CONTENTS ABSTRACT. ACKNOWLEDGi~IENTS, CI-IAPTERS I, PROLOGUE TO CONTROVERSY 1861-1868. . II. PRELUDE TO SETTLEMENT: THE JOHNSON-STANLEY NEGOTIATIONS. III THE JOHNSON CLARENDON CONiVENTION Page 111 1...

  12. CAES (conventional compressed-air energy storage) plant with steam generation: Preliminary design and cost analysis

    SciTech Connect (OSTI)

    Nakhamkin, M.; Swensen, E.C.; Abitante, P.A. (Energy Storage and Power Consultants, Mountainside, NJ (USA))

    1990-10-01T23:59:59.000Z

    A study was performed to evaluate the performance and cost characteristics of two alternative CAES-plant concepts which utilize the low-pressure expander's exhaust-gas heat for the generation of steam in a heat recovery steam generator (HRSG). Both concepts result in increased net-power generation relative to a conventional CAES plant with a recuperator. The HRSG-generated steam produces additional power in either a separate steam-turbine bottoming cycle (CAESCC) or by direct injection into and expansion through the CAES-turboexpander train (CAESSI). The HRSG, which is a proven component of combined-cycle and cogeneration plants, replaces the recuperator of a conventional CAES plant, which has demonstrated the potential for engineering and operating related problems and higher costs than were originally estimated. To enhance the credibility of the results, the analyses performed were based on the performance, operational and cost data of the 110-MW CAES plant currently under construction for the Alabama Electric Cooperative (AEC). The results indicate that CAESCC- and CAESSI-plant concepts are attractive alternatives to the conventional CAES plant with recuperator, providing greater power generation, up to 44-MW relative to the AEC CAES plant, with competitive operating and capital costs. 5 refs., 43 figs., 26 tabs.

  13. Cooperative Mmonitoring Center Occasional Paper/5: Propspects of Conventional Arms Control in South Asia

    SciTech Connect (OSTI)

    Gupta, Amit; Kamal, Nazir

    1998-11-01T23:59:59.000Z

    The intensely adversarial relationship between India and Pakistan is marked by military rivalry, mutual distrust, and suspicion. The most dividing disagreement has been over the Kashmir region. An inability to discuss the Kashmir issue has prevented discussion on other important issues. Since there is little prospect of detente, at least in the near-term, the question is whether this rivalry can be contained by other means, such as arms control approaches. Conventional arms control has been applied flexibly and successfully in some regions to reduce threat-perceptions and achieve reassuring military stability. Some lessons from other international models might be applied to the India/Pakistan context. This paper discusses the status of conventional arms control in South Asia, the dominant Indian and Pakistani perceptions about arms control, the benefits that could be derived from arms control, as well as the problems and prospects of arms control. It also discusses existing conventional arms control agreements at the regional and global levels as well as the potential role of cooperative monitoring technology.

  14. Abstract --The growth of non-conventional renewable energies involves a new challenge for optimal network expansion. A better

    E-Print Network [OSTI]

    Catholic University of Chile (Universidad Catlica de Chile)

    1 Abstract -- The growth of non-conventional renewable energies involves a new challenge and implementation of policies to develop Non-Conventional Renewable Energies (NCRE), they can be seen as a mechanism for optimal network expansion. A better integration of renewables will be allowed by determining transmission

  15. Conventional vs Electric Commercial Vehicle Fleets 1 Paper published in the Proceedings of "The Seventh International Conference on City Logistics"

    E-Print Network [OSTI]

    Bertini, Robert L.

    Conventional vs Electric Commercial Vehicle Fleets 1 Paper published in the Proceedings of "The 9th June 2011 CONVENTIONAL VS ELECTRIC COMMERCIAL VEHICLE FLEETS A CASE STUDY OF ECONOMIC AND TECHNOLOGICAL FACTORS AFFECTING THE COMPETITIVENESS OF ELECTRIC COMMERCIAL VEHICLES IN THE USA Wei Feng, Ph

  16. Comparative Study for the Interpretation of Mineral Concentrations, Total Porosity, and TOC in Hydrocarbon-Bearing Shale from Conventional Well

    E-Print Network [OSTI]

    Torres-Verdn, Carlos

    , and TOC in Hydrocarbon-Bearing Shale from Conventional Well Logs Haryanto Adiguna, SPE, Anadarko Petroleum, water saturation, and kerogen content determine the amount of hydrocarbon-in-place while mineral petrophysical interpretation techniques commonly used to quantify mineral composition from conventional well

  17. Guidelines for the verification and validation of expert system software and conventional software: Survey and assessment of conventional software verification and validation methods. Volume 2

    SciTech Connect (OSTI)

    Mirsky, S.M.; Groundwater, E.H.; Hayes, J.E.; Miller, L.A. [Science Applications International Corp., McLean, VA (United States)

    1995-03-01T23:59:59.000Z

    By means of a literature survey, a comprehensive set of methods was identified for the verification and validation of conventional software. The 153 methods so identified were classified according to their appropriateness for various phases of a developmental life-cycle -- requirements, design, and implementation; the last category was subdivided into two, static testing and dynamic testing methods. The methods were then characterized in terms of eight rating factors, four concerning ease-of-use of the methods and four concerning the methods` power to detect defects. Based on these factors, two measurements were developed to permit quantitative comparisons among methods, a Cost-Benefit metric and an Effectiveness Metric. The Effectiveness Metric was further refined to provide three different estimates for each method, depending on three classes of needed stringency of V&V (determined by ratings of a system`s complexity and required-integrity). Methods were then rank-ordered for each of the three classes by terms of their overall cost-benefits and effectiveness. The applicability was then assessed of each for the identified components of knowledge-based and expert systems, as well as the system as a whole.

  18. An investigation of wind loads on conventional and nonconventional highway signs

    E-Print Network [OSTI]

    Ross, Hayes Ellis

    1967-01-01T23:59:59.000Z

    ) With the flanged connection at the base of the tubular support the sign could be rotated. in 22. 5-degree increments allowing for a semi-controlled environment. (d) The wind loads on a sign with a single tubular support are believed to be of the same order...AN INVESTIGATION OF WIND LOADS ON CONVENTIONAL AND NONCONVENTIONAL HIGHWAY SIGNS A Thesis By Hayes Ellis Ross, Jr. Submitted to the Graduate College of the Texas A&M University in partial fulfillment of the requirements for the degree...

  19. Protein folding and non-conventional drug design: a primer for nuclear structure physicists

    SciTech Connect (OSTI)

    Broglia, R.A. [Dipartimento di Fisica, Universita di Milano, Via Celoria 16, I-20133 Milan (Italy); INFN, Sezione di Milano, Via Celoria 16, I-20133 Milan (Italy); Niels Bohr Institute, University of Copenhagen, 2100 Copenhagen (Denmark); Tiana, G.; Provasi, D. [Dipartimento di Fisica, Universita di Milano, Via Celoria 16, I-20133 Milan (Italy); INFN, Sezione di Milano, Via Celoria 16, I-20133 Milan (Italy)

    2004-02-27T23:59:59.000Z

    Some of the paradigms emerging from the study of the phenomena of phase transitions in finite many-body systems, like e.g. the atomic nucleus can be used at profit to solve the protein folding problem within the framework of simple (although not oversimplified) models. From this solution a paradigm emerges for the design of non-conventional drugs, which inhibit enzymatic action without inducing resistance (mutations). The application of these concepts to the design of an inhibitor to the HIV-protease central in the life cycle of the HIV virus is discussed.

  20. ,"Conventional Gasoline Sales to End Users, Total Refiner Sales Volumes"

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghurajiConventional Gasoline Sales to End Users, Total Refiner Sales Volumes" ,"Click worksheet

  1. Routine inspection effort required for verification of a nuclear material production cutoff convention

    SciTech Connect (OSTI)

    Dougherty, D.; Fainberg, A.; Sanborn, J.; Allentuck, J.; Sun, C.

    1996-11-01T23:59:59.000Z

    On 27 September 1993, President Clinton proposed {open_quotes}... a multilateral convention prohibiting the production of highly enriched uranium or plutonium for nuclear explosives purposes or outside of international safeguards.{close_quotes} The UN General Assembly subsequently adopted a resolution recommending negotiation of a non-discriminatory, multilateral, and internationally and effectively verifiable treaty (hereinafter referred to as {open_quotes}the Cutoff Convention{close_quotes}) banning the production of fissile material for nuclear weapons. The matter is now on the agenda of the Conference on Disarmament, although not yet under negotiation. This accord would, in effect, place all fissile material (defined as highly enriched uranium and plutonium) produced after entry into force (EIF) of the accord under international safeguards. {open_quotes}Production{close_quotes} would mean separation of the material in question from radioactive fission products, as in spent fuel reprocessing, or enrichment of uranium above the 20% level, which defines highly enriched uranium (HEU). Facilities where such production could occur would be safeguarded to verify that either such production is not occurring or that all material produced at these facilities is maintained under safeguards.

  2. The LBNO long-baseline oscillation sensitivities with two conventional neutrino beams at different baselines

    E-Print Network [OSTI]

    :,; Agostino, L; Aittola, M; Alekou, A; Andrieu, B; Antoniou, F; Asfandiyarov, R; Autiero, D; Bsida, O; Balik, A; Ballett, P; Bandac, I; Banerjee, D; Bartmann, W; Bay, F; Biskup, B; Blebea-Apostu, A M; Blondel, A; Bogomilov, M; Bolognesi, S; Borriello, E; Brancus, I; Bravar, A; Buizza-Avanzini, M; Caiulo, D; Calin, M; Calviani, M; Campanelli, M; Cantini, C; Cata-Danil, G; Chakraborty, S; Charitonidis, N; Chaussard, L; Chesneanu, D; Chipesiu, F; Crivelli, P; Dawson, J; De Bonis, I; Declais, Y; Sanchez, P Del Amo; Delbart, A; Di Luise, S; Duchesneau, D; Dumarchez, J; Efthymiopoulos, I; Eliseev, A; Emery, S; Enqvist, T; Enqvist, K; Epprecht, L; Erykalov, A N; Esanu, T; Franco, D; Friend, M; Galymov, V; Gavrilov, G; Gendotti, A; Giganti, C; Gilardoni, S; Goddard, B; Gomoiu, C M; Gornushkin, Y A; Gorodetzky, P; Haesler, A; Hasegawa, T; Horikawa, S; Huitu, K; Izmaylov, A; Jipa, A; Kainulainen, K; Karadzhov, Y; Khabibullin, M; Khotjantsev, A; Kopylov, A N; Korzenev, A; Kosyanenko, S; Kryn, D; Kudenko, Y; Kuusiniemi, P; Lazanu, I; Lazaridis, C; Levy, J -M; Loo, K; Maalampi, J; Margineanu, R M; Marteau, J; Martin-Mari, C; Matveev, V; Mazzucato, E; Mefodiev, A; Mineev, O; Mirizzi, A; Mitrica, B; Murphy, S; Nakadaira, T; Narita, S; Nesterenko, D A; Nguyen, K; Nikolics, K; Noah, E; Novikov, Yu; Oprima, A; Osborne, J; Ovsyannikova, T; Papaphilippou, Y; Pascoli, S; Patzak, T; Pectu, M; Pennacchio, E; Periale, L; Pessard, H; Popov, B; Ravonel, M; Rayner, M; Resnati, F; Ristea, O; Robert, A; Rubbia, A; Rummukainen, K; Saftoiu, A; Sakashita, K; Sanchez-Galan, F; Sarkamo, J; Saviano, N; Scantamburlo, E; Sergiampietri, F; Sgalaberna, D; Shaposhnikova, E; Slupecki, M; Smargianaki, D; Stanca, D; Steerenberg, R; Sterian, A R; Sterian, P; Stoica, S; Strabel, C; Suhonen, J; Suvorov, V; Toma, G; Tonazzo, A; Trzaska, W H; Tsenov, R; Tuominen, K; Valram, M; Vankova-Kirilova, G; Vannucci, F; Vasseur, G; Velotti, F; Velten, P; Venturi, V; Viant, T; Vihonen, S; Vincke, H; Vorobyev, A; Weber, A; Wu, S; Yershov, N; Zambelli, L; Zito, M

    2014-01-01T23:59:59.000Z

    The proposed Long Baseline Neutrino Observatory (LBNO) initially consists of $\\sim 20$ kton liquid double phase TPC complemented by a magnetised iron calorimeter, to be installed at the Pyh\\"asalmi mine, at a distance of 2300 km from CERN. The conventional neutrino beam is produced by 400 GeV protons accelerated at the SPS accelerator delivering 700 kW of power. The long baseline provides a unique opportunity to study neutrino flavour oscillations over their 1st and 2nd oscillation maxima exploring the $L/E$ behaviour, and distinguishing effects arising from $\\delta_{CP}$ and matter. In this paper we show how this comprehensive physics case can be further enhanced and complemented if a neutrino beam produced at the Protvino IHEP accelerator complex, at a distance of 1160 km, and with modest power of 450 kW is aimed towards the same far detectors. We show that the coupling of two independent sub-MW conventional neutrino and antineutrino beams at different baselines from CERN and Protvino will allow to measure ...

  3. Implementing the Espoo Convention in transboundary EIA between Germany and Poland

    SciTech Connect (OSTI)

    Albrecht, Eike [Brandenburg University of Technology of Cottbus (BTU) Centre for Law and Administration, Konrad-Wachsmann-Allee 1, D - 03046 Cottbus (Germany)], E-mail: albrecht@tu-cottbus.de

    2008-08-15T23:59:59.000Z

    Poland and Germany have a long common border which leads to the necessity to cooperate and consult each other in the case of large-scale projects or infrastructure measures likely to cause negative transboundary effects on the environment. There are already binding provisions for transboundary EIA. In the area of the UN Economic Commission for Europe (UNECE), transboundary EIA is intended to be legally binding for the Member States by the Espoo Convention which was ratified by Germany 8.8.2002 and by Poland 12.6.1997. Due to corresponding directives, the same is applicable in the context of the European Union. In German legislation, this issue is regulated by Art. 8 of the Federal EIA Act in regard to transboundary participation of administration and by Art. 9a in respect of transboundary public participation. However, these EIA regulations on transboundary participation do not surpass a certain detail level, as they have to be applied between Germany and all neighbouring states. Therefore both countries decided to agree on more detailed provisions in particular regarding procedural questions. During the 12th German-Polish Environmental Council, Germany and Poland reached an agreement on 11.4.2006 in Neuhardenberg/Brandenburg an agreement upon the implementation of the Espoo Convention, the so called Neuhardenberg Agreement. This article assesses the agreement under consideration of already existing law and discusses major improvements and problems.

  4. Accounting for the Variation of Driver Aggression in the Simulation of Conventional and Advanced Vehicles (Presentation)

    SciTech Connect (OSTI)

    Neubauer, J.; Wood, E.

    2013-05-01T23:59:59.000Z

    This presentation discusses a method of accounting for realistic levels of driver aggression to higher-level vehicle studies, including the impact of variation in real-world driving characteristics (acceleration and speed) on vehicle energy consumption and different powertrains (e.g., conventionally powered vehicles versus electrified drive vehicles [xEVs]). Aggression variation between drivers can increase fuel consumption by more than 50% or decrease it by more than 20% from average. The normalized fuel consumption deviation from average as a function of population percentile was found to be largely insensitive to powertrain. However, the traits of ideal driving behavior are a function of powertrain. In conventional vehicles, kinetic losses dominate rolling resistance and aerodynamic losses. In xEVs with regenerative braking, rolling resistance and aerodynamic losses dominate. The relation of fuel consumption predicted from real-world drive data to that predicted by the industry-standard HWFET, UDDS, LA92, and US06 drive cycles was not consistent across powertrains, and varied broadly from the mean, median, and mode of real-world driving. A drive cycle synthesized by NREL's DRIVE tool accurately and consistently reproduces average real-world for multiple powertrains within 1%, and can be used to calculate the fuel consumption effects of varying levels of driver aggression.

  5. A comparison of the fracture properties of conventional and polymer-modified two-layer asphalt concrete overlay systems

    E-Print Network [OSTI]

    Reddy, Praveena Gutha

    1996-01-01T23:59:59.000Z

    The problem of reflection cracking through the conventional asphalt concrete overlays has increased the need to find new materials which could resist cracking or fracture more effectively. It is for this reason that polymers ...

  6. Identification, Verification, and Compilation of Produced Water Management Practices for Conventional Oil and Gas Production Operations

    SciTech Connect (OSTI)

    Rachel Henderson

    2007-09-30T23:59:59.000Z

    The project is titled 'Identification, Verification, and Compilation of Produced Water Management Practices for Conventional Oil and Gas Production Operations'. The Interstate Oil and Gas Compact Commission (IOGCC), headquartered in Oklahoma City, Oklahoma, is the principal investigator and the IOGCC has partnered with ALL Consulting, Inc., headquartered in Tulsa, Oklahoma, in this project. State agencies that also have partnered in the project are the Wyoming Oil and Gas Conservation Commission, the Montana Board of Oil and Gas Conservation, the Kansas Oil and Gas Conservation Division, the Oklahoma Oil and Gas Conservation Division and the Alaska Oil and Gas Conservation Commission. The objective is to characterize produced water quality and management practices for the handling, treating, and disposing of produced water from conventional oil and gas operations throughout the industry nationwide. Water produced from these operations varies greatly in quality and quantity and is often the single largest barrier to the economic viability of wells. The lack of data, coupled with renewed emphasis on domestic oil and gas development, has prompted many experts to speculate that the number of wells drilled over the next 20 years will approach 3 million, or near the number of current wells. This level of exploration and development undoubtedly will draw the attention of environmental communities, focusing their concerns on produced water management based on perceived potential impacts to fresh water resources. Therefore, it is imperative that produced water management practices be performed in a manner that best minimizes environmental impacts. This is being accomplished by compiling current best management practices for produced water from conventional oil and gas operations and to develop an analysis tool based on a geographic information system (GIS) to assist in the understanding of watershed-issued permits. That would allow management costs to be kept in line with the specific projects and regions, which increases the productive life of wells and increases the ultimate recoverable reserves in the ground. A case study was conducted in Wyoming to validate the applicability of the GIS analysis tool for watershed evaluations under real world conditions. Results of the partnered research will continue to be shared utilizing proven methods, such as on the IGOCC Web site, preparing hard copies of the results, distribution of documented case studies, and development of reference and handbook components to accompany the interactive internet-based GIS watershed analysis tool. Additionally, there have been several technology transfer seminars and presentations. The goal is to maximize the recovery of our nation's energy reserves and to promote water conservation.

  7. Design optimization of conventional heat pumps: application to steady-state heating efficiency

    SciTech Connect (OSTI)

    Rice, C.K.; Fischer, S.K.; Ellison, R.D.; Jackson, W.L.

    1981-01-01T23:59:59.000Z

    A physically-based heat pump model was connected to an optimiztion program to form a computer code for use in the design of high-efficiency heat pumps. The method used allows for the simultaneous optimization of selected design variables, taking proper account of their interactions, while constraining other parameters to chosen limits or fixed values. For optimiztion of the steady-state heating efficiency of conventional heat pumps, ten variables were optimized while heating capacity was fixed; the results may, however, be scaled to other capacities. Calculations were made for a range of component efficiencies and heat exchanger sizes. The results predict substantial improvement in heating performance due to both optimal system configurations and the use of improved components. Sensitivity analyses show that there is considerable latitude for deviating from the optimum design to make use of available component sizes and for accomodating the compromises needed for good cooling performance.

  8. An Experimental Study of Waveguide Coupled Microwave Heating with Conventional Multicusp Negative Ion Source

    E-Print Network [OSTI]

    Komppula, J; Koivisto, H; Laulainen, J; Tarvainen, O

    2015-01-01T23:59:59.000Z

    Negative ion production with conventional multicusp plasma chambers utilizing 2.45 GHz microwave heating is demonstrated. The experimental results were obtained with the multicusp plasma chambers and extraction systems of the RFdriven RADIS ion source and the filament driven arc discharge ion source LIISA. A waveguide microwave coupling system, which is almost similar to the one used with the SILHI ion source, was used. The results demonstrate that at least one third of negative ion beam obtained with inductive RF-coupling (RADIS) or arc discharge (LIISA) can be achieved with 1 kW of 2.45 GHz microwave power in CW mode without any modification of the plasma chamber. The co-extracted electron to H^- ratio and the optimum pressure range were observed to be similar for both heating methods. The behaviour of the plasma implies that the energy transfer from the microwaves to the plasma electrons is mainly an off-resonance process.

  9. Two-dimensional electronic spectroscopy based on conventional optics and fast dual chopper data acquisition

    SciTech Connect (OSTI)

    Heisler, Ismael A., E-mail: i.heisler@uea.ac.uk; Moca, Roberta; Meech, Stephen R., E-mail: s.meech@uea.ac.uk [School of Chemistry, University of East Anglia, Norwich Research Park, Norwich NR4 7TJ (United Kingdom); Camargo, Franco V. A. [School of Chemistry, University of East Anglia, Norwich Research Park, Norwich NR4 7TJ (United Kingdom); CAPES Foundation, Ministry of Education of Brazil, Braslia - DF 70040-020 (Brazil)

    2014-06-15T23:59:59.000Z

    We report an improved experimental scheme for two-dimensional electronic spectroscopy (2D-ES) based solely on conventional optical components and fast data acquisition. This is accomplished by working with two choppers synchronized to a 10 kHz repetition rate amplified laser system. We demonstrate how scattering and pump-probe contributions can be removed during 2D measurements and how the pump probe and local oscillator spectra can be generated and saved simultaneously with each population time measurement. As an example the 2D-ES spectra for cresyl violet were obtained. The resulting 2D spectra show a significant oscillating signal during population evolution time which can be assigned to an intramolecular vibrational mode.

  10. Grain growth in a conventional titanium alloy during rapid, continuous heat treatment

    SciTech Connect (OSTI)

    Semiatin, S.L. (Wright Lab., Wright-Patterson AFB, OH (United States)); Soper, J.C. (Wright State Univ., Dayton, OH (United States)); Sukonnik, I.M. (Texas Instruments, Inc., Attleboro, MA (United States))

    1994-04-01T23:59:59.000Z

    The objective of the present work was to analyze the kinetics of beta grain growth during rapid, continuous heating of a conventional alpha-beta titanium alloy. The analysis was based on approximate, closed-form theoretical expressions derived by Bourell and Kaysser and Soper and Semiatin as well as a fully numerical, computer-based approach. The problem and approach discussed here differs from previous investigations of grain growth during continuous heating and cooling, most of which have been for austenite grain growth in the heat-affected zone during welding of steels. In this regard, the main features of the present work are the very high heating rates involved, the avoidance of the application of complex numerical integration schemes, and the avoidance of using isothermal grain growth kinetic data to fit continuous heating results.

  11. Comparison of reliability performance of group connected and conventional HVDC transmission systems

    SciTech Connect (OSTI)

    Kuruganty, S. [Univ. of North Dakota, Grand Forks, ND (United States). Dept. of Electrical Engineering] [Univ. of North Dakota, Grand Forks, ND (United States). Dept. of Electrical Engineering

    1995-10-01T23:59:59.000Z

    A group connected HVDC transmission scheme is a variant of the unit connection where instead of a single generator, a group of generators are directly connected to the converter. Studies conducted in the past indicated that significant cost reduction can be achieved using this scheme. This is mainly due to the elimination of many components which results in considerable capital and operating cost savings to the utility. Concerns regarding the reliability performance of unit connected schemes were raised, however, there has not been a detailed reliability study conducted. This paper addresses the reliability evaluation aspect of a group connected scheme and compares the reliability performance of the group connected scheme with that of the conventional common collector system. Reliability models for both schemes were developed using a hypothetical system model based on the Nelson River system. Practical system component outage data was used to examine the reliability performance of both schemes.

  12. Conventional Versus Automated Implantation of Loose Seeds in Prostate Brachytherapy: Analysis of Dosimetric and Clinical Results

    SciTech Connect (OSTI)

    Genebes, Caroline, E-mail: genebes.caroline@claudiusregaud.fr [Radiation Oncology Department, Institut Claudius Regaud, Toulouse (France); Filleron, Thomas; Graff, Pierre [Radiation Oncology Department, Institut Claudius Regaud, Toulouse (France); Jonca, Frdric [Department of Urology, Clinique Ambroise Par, Toulouse (France); Huyghe, Eric; Thoulouzan, Matthieu; Soulie, Michel; Malavaud, Bernard [Department of Urology and Andrology, CHU Rangueil, Toulouse (France); Aziza, Richard; Brun, Thomas; Delannes, Martine; Bachaud, Jean-Marc [Radiation Oncology Department, Institut Claudius Regaud, Toulouse (France)

    2013-11-15T23:59:59.000Z

    Purpose: To review the clinical outcome of I-125 permanent prostate brachytherapy (PPB) for low-risk and intermediate-risk prostate cancer and to compare 2 techniques of loose-seed implantation. Methods and Materials: 574 consecutive patients underwent I-125 PPB for low-risk and intermediate-risk prostate cancer between 2000 and 2008. Two successive techniques were used: conventional implantation from 2000 to 2004 and automated implantation (Nucletron, FIRST system) from 2004 to 2008. Dosimetric and biochemical recurrence-free (bNED) survival results were reported and compared for the 2 techniques. Univariate and multivariate analysis researched independent predictors for bNED survival. Results: 419 (73%) and 155 (27%) patients with low-risk and intermediate-risk disease, respectively, were treated (median follow-up time, 69.3 months). The 60-month bNED survival rates were 95.2% and 85.7%, respectively, for patients with low-risk and intermediate-risk disease (P=.04). In univariate analysis, patients treated with automated implantation had worse bNED survival rates than did those treated with conventional implantation (P<.0001). By day 30, patients treated with automated implantation showed lower values of dose delivered to 90% of prostate volume (D90) and volume of prostate receiving 100% of prescribed dose (V100). In multivariate analysis, implantation technique, Gleason score, and V100 on day 30 were independent predictors of recurrence-free status. Grade 3 urethritis and urinary incontinence were observed in 2.6% and 1.6% of the cohort, respectively, with no significant differences between the 2 techniques. No grade 3 proctitis was observed. Conclusion: Satisfactory 60-month bNED survival rates (93.1%) and acceptable toxicity (grade 3 urethritis <3%) were achieved by loose-seed implantation. Automated implantation was associated with worse dosimetric and bNED survival outcomes.

  13. The LBNO long-baseline oscillation sensitivities with two conventional neutrino beams at different baselines

    E-Print Network [OSTI]

    LAGUNA-LBNO Collaboration; :; S. K. Agarwalla; L. Agostino; M. Aittola; A. Alekou; B. Andrieu; F. Antoniou; R. Asfandiyarov; D. Autiero; O. Bsida; A. Balik; P. Ballett; I. Bandac; D. Banerjee; W. Bartmann; F. Bay; B. Biskup; A. M. Blebea-Apostu; A. Blondel; M. Bogomilov; S. Bolognesi; E. Borriello; I. Brancus; A. Bravar; M. Buizza-Avanzini; D. Caiulo; M. Calin; M. Calviani; M. Campanelli; C. Cantini; G. Cata-Danil; S. Chakraborty; N. Charitonidis; L. Chaussard; D. Chesneanu; F. Chipesiu; P. Crivelli; J. Dawson; I. De Bonis; Y. Declais; P. Del Amo Sanchez; A. Delbart; S. Di Luise; D. Duchesneau; J. Dumarchez; I. Efthymiopoulos; A. Eliseev; S. Emery; T. Enqvist; K. Enqvist; L. Epprecht; A. N. Erykalov; T. Esanu; D. Franco; M. Friend; V. Galymov; G. Gavrilov; A. Gendotti; C. Giganti; S. Gilardoni; B. Goddard; C. M. Gomoiu; Y. A. Gornushkin; P. Gorodetzky; A. Haesler; T. Hasegawa; S. Horikawa; K. Huitu; A. Izmaylov; A. Jipa; K. Kainulainen; Y. Karadzhov; M. Khabibullin; A. Khotjantsev; A. N. Kopylov; A. Korzenev; S. Kosyanenko; D. Kryn; Y. Kudenko; P. Kuusiniemi; I. Lazanu; C. Lazaridis; J. -M. Levy; K. Loo; J. Maalampi; R. M. Margineanu; J. Marteau; C. Martin-Mari; V. Matveev; E. Mazzucato; A. Mefodiev; O. Mineev; A. Mirizzi; B. Mitrica; S. Murphy; T. Nakadaira; S. Narita; D. A. Nesterenko; K. Nguyen; K. Nikolics; E. Noah; Yu. Novikov; A. Oprima; J. Osborne; T. Ovsyannikova; Y. Papaphilippou; S. Pascoli; T. Patzak; M. Pectu; E. Pennacchio; L. Periale; H. Pessard; B. Popov; M. Ravonel; M. Rayner; F. Resnati; O. Ristea; A. Robert; A. Rubbia; K. Rummukainen; A. Saftoiu; K. Sakashita; F. Sanchez-Galan; J. Sarkamo; N. Saviano; E. Scantamburlo; F. Sergiampietri; D. Sgalaberna; E. Shaposhnikova; M. Slupecki; D. Smargianaki; D. Stanca; R. Steerenberg; A. R. Sterian; P. Sterian; S. Stoica; C. Strabel; J. Suhonen; V. Suvorov; G. Toma; A. Tonazzo; W. H. Trzaska; R. Tsenov; K. Tuominen; M. Valram; G. Vankova-Kirilova; F. Vannucci; G. Vasseur; F. Velotti; P. Velten; V. Venturi; T. Viant; S. Vihonen; H. Vincke; A. Vorobyev; A. Weber; S. Wu; N. Yershov; L. Zambelli; M. Zito

    2014-12-02T23:59:59.000Z

    The proposed Long Baseline Neutrino Observatory (LBNO) initially consists of $\\sim 20$ kton liquid double phase TPC complemented by a magnetised iron calorimeter, to be installed at the Pyh\\"asalmi mine, at a distance of 2300 km from CERN. The conventional neutrino beam is produced by 400 GeV protons accelerated at the SPS accelerator delivering 700 kW of power. The long baseline provides a unique opportunity to study neutrino flavour oscillations over their 1st and 2nd oscillation maxima exploring the $L/E$ behaviour, and distinguishing effects arising from $\\delta_{CP}$ and matter. In this paper we show how this comprehensive physics case can be further enhanced and complemented if a neutrino beam produced at the Protvino IHEP accelerator complex, at a distance of 1160 km, and with modest power of 450 kW is aimed towards the same far detectors. We show that the coupling of two independent sub-MW conventional neutrino and antineutrino beams at different baselines from CERN and Protvino will allow to measure CP violation in the leptonic sector at a confidence level of at least $3\\sigma$ for 50\\% of the true values of $\\delta_{CP}$ with a 20 kton detector. With a far detector of 70 kton, the combination allows a $3\\sigma$ sensitivity for 75\\% of the true values of $\\delta_{CP}$ after 10 years of running. Running two independent neutrino beams, each at a power below 1 MW, is more within today's state of the art than the long-term operation of a new single high-energy multi-MW facility, which has several technical challenges and will likely require a learning curve.

  14. Catalog of DC Appliances and Power Systems

    SciTech Connect (OSTI)

    Garbesi, Karina; Vossos, Vagelis; Shen, Hongxia

    2010-10-13T23:59:59.000Z

    This document catalogs the characteristics of current and potential future DC products and power systems.

  15. Catalog of DC Appliances and Power Systems

    E-Print Network [OSTI]

    Garbesi, Karina

    2012-01-01T23:59:59.000Z

    energy efficient products that utilize DC power internally; the demonstrated energy savings of direct-DC in commercial data centers;energy efficient products that utilize DC power internally, the demonstrated energy savings of direct-DC power use in commercial data centers,

  16. Catalog of DC Appliances and Power Systems

    E-Print Network [OSTI]

    Garbesi, Karina

    2012-01-01T23:59:59.000Z

    Other Electric Water Heaters Solar Water Heaters ColorSecurity Systems Solar Water Heaters Spas See standby/lowGeothermal Heat Pumps Solar Water Heaters Electric Heat

  17. DRAFT PROPOSED AMENDMENTS TO APPLIANCE EFFICIENCY REGULATIONS

    E-Print Network [OSTI]

    in Section 1602(l). (4) designed exclusively to be connected to distribution and transmission lines of peak, contractors and subcontractors make no warrant, express or implied, and assume no legal liability and then changes the electric lighting level in response to the daylight changes. "Automatic time switch control

  18. Catalog of DC Appliances and Power Systems

    E-Print Network [OSTI]

    Garbesi, Karina

    2012-01-01T23:59:59.000Z

    Lighting-Torchiere Electric Other Electric Water HeatersSolar Water Heaters Color Televisions and Set-Top BoxesTorchiere Electric Water Heaters Refrigerators Electric

  19. Catalog of DC Appliances and Power Systems

    E-Print Network [OSTI]

    Garbesi, Karina

    2012-01-01T23:59:59.000Z

    Electric Water Heaters Solar Water Heaters Color TelevisionsSecurity Systems Solar Water Heaters Spas See standby/lowGeothermal Heat Pumps Solar Water Heaters Electric Heat

  20. Catalog of DC Appliances and Power Systems

    E-Print Network [OSTI]

    Garbesi, Karina

    2012-01-01T23:59:59.000Z

    shipments, remote (off-grid applications) constituted onlyprimarily for off-grid applications, the technology has