Powered by Deep Web Technologies
Note: This page contains sample records for the topic "appliance efficiency standards" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Energy Efficiency Standards for Appliances  

Broader source: Energy.gov [DOE]

'' Note: The federal government has imposed and updated appliance efficiency standards through several legislative acts,* and now has standards in place or under development for 30 classes of...

2

Appliance and Equipment Efficiency Standards  

Broader source: Energy.gov [DOE]

'' Note: The federal government has imposed and updated appliance efficiency standards through several legislative acts,* and now has standards in place or under development for 30 classes of...

3

Appliance and Equipment Energy Efficiency Standards  

Broader source: Energy.gov [DOE]

'' Note: The federal government has imposed and updated appliance efficiency standards through several legislative acts,* and now has standards in place or under development for 30 classes of...

4

Appliance Efficiency Standards and Price Discrimination  

E-Print Network [OSTI]

2: Definition of Energy Efficiency-Based Market Segments/Minimum & ENERGY STAR Standards Market Segment Descriptiondrops. The markets for large energy consuming appliances are

Spurlock, Cecily Anna

2014-01-01T23:59:59.000Z

5

Appliance Efficiency Standards and Price Discrimination  

SciTech Connect (OSTI)

I explore the effects of two simultaneous changes in minimum energy efficiency and ENERGY STAR standards for clothes washers. Adapting the Mussa and Rosen (1978) and Ronnen (1991) second-degree price discrimination model, I demonstrate that clothes washer prices and menus adjusted to the new standards in patterns consistent with a market in which firms had been price discriminating. In particular, I show evidence of discontinuous price drops at the time the standards were imposed, driven largely by mid-low efficiency segments of the market. The price discrimination model predicts this result. On the other hand, in a perfectly competition market, prices should increase for these market segments. Additionally, new models proliferated in the highest efficiency market segment following the standard changes. Finally, I show that firms appeared to use different adaptation strategies at the two instances of the standards changing.

Spurlock, Cecily Anna

2013-05-08T23:59:59.000Z

6

Appliance Standards Resources  

Broader source: Energy.gov [DOE]

The federal government, and some states, have established minimum efficiency standards for certain appliances and equipment, such as refrigerators and clothes washers.

7

Global residential appliance standards  

SciTech Connect (OSTI)

In most countries, residential electricity consumption typically ranges from 20% to 40% of total electricity consumption. This energy is used for heating, cooling, refrigeration and other end-uses. Significant energy savings are possible if new appliance purchases are for models with higher efficiency than that of existing models. There are several ways to ensure or encourage such an outcome, for example, appliance rebates, innovative procurement, and minimum efficiency standards. This paper focuses on the latter approach. At the present time, the US is the only country with comprehensive appliance energy efficiency standards. However, many other countries, such as Australia, Canada, the European Community (EC), Japan and Korea, are considering enacting standards. The greatest potential impact of minimum efficiency standards for appliances is in the developing countries (e.g., China and India), where saturations of household appliances are relatively low but growing rapidly. This paper discusses the potential savings that could be achieved from global appliance efficiency standards for refrigerators and freezers. It also could be achieved from global appliance efficiency standards for refrigerators and freezers. It also discusses the impediments to establishing common standards for certain appliance types, such as differing test procedures, characteristics, and fuel prices. A methodology for establishing global efficiency standards for refrigerators and freezers is described.

Turiel, I.; McMahon, J.E. (Lawrence Berkeley Lab., CA (United States)); Lebot, B. (Agence Francaise pour la Maitrise de l'Energie, Valbonne (France))

1993-03-01T23:59:59.000Z

8

Efficiency of appliance models on the market before and after DOE standards  

SciTech Connect (OSTI)

Energy efficiency standards for appliances mandate that appliance manufacturers not manufacture or import models that have a test energy efficiency below a specified level after the standard effective date. Thus, appliance standards set a floor for energy efficiency. But do they also induce more significant changes in the efficiencies that manufacturers offer after the standard becomes effective? To address this question, we undertook an examination of before-standard and after-standard efficiency of models on the market for three products: (1) Refrigerators (1990, 1993, and 2001 standards); (2) Room air conditioners (1990 and 2000 standards); and (3) Gas furnaces (1992 standard).

Meyers, Stephen

2004-06-15T23:59:59.000Z

9

Estimation of the Energy and Capacity Savings in Texas from Appliance Efficiency Standards  

E-Print Network [OSTI]

The purpose of this presentation will be to assess the technical potential for energy and capacity savings in Texas by the year 2006 by the statewide adoption of minimum appliance efficiency standards equivalent to those recently adopted...

Verdict, M.

1986-01-01T23:59:59.000Z

10

Information on the Department of Energy's analyses to determine the need for appliance efficiency standards  

SciTech Connect (OSTI)

A historical overview of three separate Department of Energy analyses performed to determine the need for appliance efficiency standards is presented. An identification of the assumptions used in each of the analyses and the conclusions reached in each analysis are covered. Standards for furnaces, water heaters, central air conditioners, refrigerators, ranges/ovens, clothes dryers, freezers, and room air conditioners are considered. (MCW)

Not Available

1981-12-23T23:59:59.000Z

11

Appliance Standards and Rulemaking Federal Advisory Committee...  

Energy Savers [EERE]

Committee provides advice and recommendations related to the following: * Development of minimum efficiency standards for residential appliances and commercial equipment, *...

12

New analysis techniques for estimating impacts of federal appliance efficiency standards  

SciTech Connect (OSTI)

Impacts of U.S. appliance and equipment standards have been described previously. Since 2000, the U.S. Department of Energy (DOE) has updated standards for clothes washers, water heaters, and residential central air conditioners and heat pumps. A revised estimate of the aggregate impacts of all the residential appliance standards in the United States shows that existing standards will reduce residential primary energy consumption and associated carbon dioxide (CO{sub 2}) emissions by 89 percent in 2020 compared to the levels expected without any standards. Studies of possible new standards are underway for residential furnaces and boilers, as well as a number of products in the commercial (tertiary) sector, such as distribution transformers and unitary air conditioners. The analysis of standards has evolved in response to critiques and in an attempt to develop more precise estimates of costs and benefits of these regulations. The newer analysis elements include: (1) valuing energy savings by using marginal (rather than average) energy prices specific to an end-use; (2) simulating the impacts of energy efficiency increases over a sample population of consumers to quantify the proportion of households having net benefits or net costs over the life of the appliance; and (3) calculating marginal markups in distribution channels to derive the incremental change in retail prices associated with increased manufacturing costs for improving energy efficiency.

McMahon, James E.

2003-06-24T23:59:59.000Z

13

How to Make Appliance Standards Work: Improving Energy and Water Efficiency Test Procedures  

E-Print Network [OSTI]

Hill. 1996. “Energy test procedures for appliances. ” EnergyWater Efficiency Test Procedures Jim Lutz, Peter Biermayer,Water Efficiency Test Procedures Jim Lutz, Peter Biermayer,

Lutz, Jim

2012-01-01T23:59:59.000Z

14

Energy-efficiency labels and standards: A guidebook for appliances, equipment and lighting  

SciTech Connect (OSTI)

Energy-performance improvements in consumer products are an essential element in any government's portfolio of energy-efficiency and climate change mitigation programs. Governments need to develop balanced programs, both voluntary and regulatory, that remove cost-ineffective, energy-wasting products from the marketplace and stimulate the development of cost-effective, energy-efficient technology. Energy-efficiency labels and standards for appliances, equipment, and lighting products deserve to be among the first policy tools considered by a country's energy policy makers. The U.S. Agency for International Development (USAID) and the United Nations Foundation (UNF) recognize the need to support policy makers in their efforts to implement energy-efficiency standards and labeling programs and have developed this guidebook, together with the Collaborative Labeling and Appliance Standards Program (CLASP), as a primary reference. This guidebook was prepared over the course of the past year with significant contribution from the authors and reviewers mentioned previously. Their diligent participation has made this the international guidance tool it was intended to be. The lead authors would also like to thank the following individuals for their support in the development, production, and distribution of the guidebook: Marcy Beck, Elisa Derby, Diana Dhunke, Ted Gartner, and Julie Osborn of Lawrence Berkeley National Laboratory as well as Anthony Ma of Bevilacqua-Knight, Inc. This guidebook is designed as a manual for government officials and others around the world responsible for developing, implementing, enforcing, monitoring, and maintaining labeling and standards-setting programs. It discusses the pros and cons of adopting energy-efficiency labels and standards and describes the data, facilities, and institutional and human resources needed for these programs. It provides guidance on the design, development, implementation, maintenance, and evaluation of the programs and on the design of the labels and standards themselves. In addition, it directs the reader to references and other resources likely to be useful in conducting the activities described and includes a chapter on energy policies and programs that complement appliance efficiency labels and standards. This guidebook attempts to reflect the essential framework of labeling and standards programs. It is the intent of the authors and sponsors to distribute copies of this book worldwide at no charge for the general public benefit. The guidebook is also available on the web at www.CLASPonline.org and can be downloaded to be used intact or piecemeal for whatever beneficial purposes readers may conceive.

McMahon, James E.; Wiel, Stephen

2001-02-16T23:59:59.000Z

15

Conservation Division regiulations for appliance-efficiency standards relating to refrigerators and freezers, room air conditioners, central air conditioners, gas space heaters, water heaters, plumbing fittings, gas clothes dryers, and gas cooking appliances  

SciTech Connect (OSTI)

The text of the appliance efficiency standards for certain types of new appliances sold in California is presented. Specifications and test methods to identify complying refrigerators, freezers, air conditioners, gas space heaters, water heaters, plumbing fittings, gas clothes dryers, and gas cooking appliances are covered.

Not Available

1981-12-16T23:59:59.000Z

16

Projected regional impacts of appliance efficiency standards for the U.S. residential sector  

SciTech Connect (OSTI)

Minimum efficiency standards for residential appliances have been implemented in the US for a large number of residential end-uses. This analysis assesses the potential energy, dollar, and carbon impacts of those standards at the state and national levels. In this assessment, the authors use historical and projected shipments of equipment, a detailed stock accounting model, measured and estimated unit energy savings associated with the standards, estimated incremental capital costs, demographic data, and fuel price data at the finest level of geographic disaggregation available. Energy savings from the standards are substantial. Total primary energy savings will peak in 2004 at about 0.7 exajoules/year (1 exajoule = 10{sup 18} joules {approx} 1 quadrillion Btu = 10{sup 15} Btus). Cumulative primary energy savings during the 1990 to 2010 period total 10.6 exajoules. Efficiency standards in the residential sector have been a highly cost-effective policy instrument for promoting energy efficiency. Projected cumulative present-values dollar savings after subtracting out the additional cost of the more efficient equipment are about $33 billion from 1990 to 2010. Average benefit/cost ratios for these standards are about 3.5 for the US as a whole. Projected carbon reductions are approximately 9 million metric tons of carbon/year from 2000 through 2010, an amount roughly equal to 4% of carbon emissions in 1990. Because these standards save energy at a cost less than the price of that energy, the resulting carbon emission reductions are achieved at negative net cost to society. Minimum efficiency standards reduce pollution and save money at the same time.

Koomey, J.G.; Mahler, S.A.; Webber, C.A.; McMahon, J.E.

1998-02-01T23:59:59.000Z

17

Status of European appliance standards  

SciTech Connect (OSTI)

The European Community (EC) recently commissioned a study of the impact of potential appliance standards on electricity consumption in the twelve EC nations. This study looks at refrigerators, freezers, dishwashers, clothes washers, and clothes dryers. The impact of minimum efficiency standards on electricity use over the time period from 1995--2010 is estimated. The results of this study were presented to the EC in September of 1991. Revisions were made to the draft report and final copies sent to all interested parties. The member nations of the EC will soon consider whether they wish to implement uniform energy efficiency standards that would take effect in 1995. The results of the study described above will be presented and the political considerations will be discussed. In addition, data describing the appliance market in Europe will be presented.

Turiel, I. (Lawrence Berkeley Lab., CA (United States)); Lebot, B. (Agence de L'Environnement et de la Maitrise de L'Energie, Valbonne (France))

1992-05-01T23:59:59.000Z

18

Realized and Projected Impacts of U.S. Energy Efficiency Standards for Residential and Commercial Appliances  

SciTech Connect (OSTI)

This study estimated energy, environmental and consumer economic impacts of U.S. Federal residential energy efficiency standards that became effective in the 1988-2006 period, and of energy efficiency standards for fluorescent lamp ballasts and distribution transformers. These standards have been the subject of in-depth analyses conducted as part of DOE's standards rulemaking process. This study drew on those analyses, but updated certain data and developed a common framework and assumptions for all of the products in order to estimate realized impacts and to update projected impacts. It also performed new analysis for the first (1990) fluorescent ballast standards, which had been introduced in the NAECA legislation without a rulemaking. We estimate that the considered standards will reduce residential/ commercial primary energy consumption and carbon dioxide emissions in 2030 by 4percent compared to the levels expected without any standards. The reduction for the residential sector is larger, at 8percent. The estimated cumulative energy savings from the standards amount to 39 quads by 2020, and 63 quads by 2030. The standards will also reduce emissions of carbon dioxide by considerable amounts.The estimated cumulative net present value of consumer benefit amounts to $241 billion by 2030, and grows to $269 billion by 2045. The overall ratio of consumer benefits to costs (in present value terms) in the 1987-2050 period is 2.7 to 1. Although the estimates made in this study are subject to a fair degree of uncertainty, we believe they provide a reasonable approximation of the national benefits resulting from Federal appliance efficiency standards.

Meyers, Stephen P.; McMahon, James; Atkinson, Barbara

2008-05-08T23:59:59.000Z

19

Status of China's Energy Efficiency Standards and Labels for Appliances and International Collaboration  

SciTech Connect (OSTI)

China first adopted minimum energy performance standards (MEPS) in 1989. Today, there are standards for a wide range of domestic, commercial and selected industrial equipment. In 1999, China launched a voluntary endorsement label, which has grown to cover over 40 products including water-saving products (See Figure 1). Further, in 2005, China started a mandatory energy information label (also referred to as the 'Energy Label'). Today, the Energy Label is applied to four products including: air conditioners; household refrigerators; clothes washers; and unitary air conditioners (See Figure 2). MEPS and the voluntary endorsement labeling specifications have been updated and revised in order to reflect technology improvements to those products in the market. These programs have had an important impact in reducing energy consumption of appliances in China. Indeed, China has built up a strong infrastructure to develop and implement product standards. Historically, however, the government's primary focus has been on the technical requirements for efficiency performance. Less attention has been paid to monitoring and enforcement with a minimal commitment of resources and little expansion of administrative capacity in this area. Thus, market compliance with both mandatory standards and labeling programs has been questionable and actual energy savings may have been undermined as a result. The establishment of a regularized monitoring system for tracking compliance with the mandatory standard and energy information label in China is a major area for program improvement. Over the years, the Collaborative Labeling and Appliance Standards Program (CLASP) has partnered with several Chinese institutions to promote energy-efficient products in China. CLASP, together with its implementing partner Lawrence Berkeley National Laboratory (LBNL), has assisted China in developing and updating the above-mentioned standards and labeling programs. Because of the increasing need for the development of a monitoring system to track compliance with standards and labeling, CLASP, with support from Japan's Ministry of Economy, Trade and Industry (METI), has expanded its ongoing collaboration with the China National Institute of Standards (CNIS) to include enforcement and monitoring. CNIS has already begun working on the issue of compliance. CNIS has conducted modest sample testing in 2006 for refrigerators, freezers and room air-conditioners, and repeated the same task in 2007 with a similar sample size for three products (refrigerators, freezers, air-conditioners and clothes washers). And, CNIS, with technical support from LBNL, has analyzed the data collected through testing. At the same time, parallel effort has also been paid to look at the potential impact of the label to 2020. In conjunction with CNIS, CLASP technical experts reviewed the standards development timeline of the four products currently subject to the mandatory energy information label. CLASP, with the support of METI/IEEJ, collaborated with CNIS to develop the efficiency grades, providing: technical input to the process; comment and advice on particular technical issues; as well as evaluation of the results. In addition, in order to effectively evaluate the impact of the label on China's market, CLASP further provided assistance to CNIS to collect data on both the efficiency distribution and product volume distribution of refrigerators on the market. This short report summarizes the status of Standards and Labeling program, current enforcement and monitoring mechanism in China, and states the importance of international collaborations.

Zhou, Nan

2008-03-01T23:59:59.000Z

20

State Appliance Standards (released in AEO2009)  

Reports and Publications (EIA)

State appliance standards have existed for decades, starting with Californias enforcement of minimum efficiency requirements for refrigerators and several other products in 1979. In 1987, recognizing that different efficiency standards for the same products in different states could create problems for manufacturers, Congress enacted the National Appliance Energy Conservation Act (NAECA), which initially covered 12 products. The Energy Policy Act of 1992 (EPACT92), EPACT2005, and EISA2007 added additional residential and commercial products to the 12 products originally specified under NAECA.

2009-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "appliance efficiency standards" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Energy-Efficiency Labels and Standards: A Guidebook for Appliances, Equipment, and Lighting - 2nd Edition  

E-Print Network [OSTI]

minimum efficiency standards, initiated in 1989, was strengthened by the Energy Conservation Law in 1997, which put end- use energy efficiency and standards

Wiel, Stephen; McMahon, James E.

2005-01-01T23:59:59.000Z

22

2012 APPLIANCE EFFICIENCY REGULATIONS Edmund G. Brown Jr., Governor  

E-Print Network [OSTI]

: Appliance Efficiency Regulations, appliance standards, refrigerators, air conditioners, space heaters, water heaters, pool heaters, pool pumps, electric spas, pool pump motors, plumbing fittings, plumbing fixtures, showerheads, spray valves, faucets, tub spout diverters, water closets, urinals, ceiling fans, ceiling fan

23

Energy-efficiency labels and standards: A guidebook for appliances, equipment and lighting  

E-Print Network [OSTI]

Appliance Manufacturers’ (AHAM) certification program forAuthority of Thailand AEU AGO AHAM AMI ANSI ANOPR APEC ARI

McMahon, James E.; Wiel, Stephen

2001-01-01T23:59:59.000Z

24

Energy-Efficiency Labels and Standards: A Guidebook forAppliances, Equipment, and Lighting - 2nd Edition  

SciTech Connect (OSTI)

Energy-performance improvements in consumer products are an essential element in any government's portfolio of energy-efficiency and climate change mitigation programs. Governments need to develop balanced programs, both voluntary and regulatory, that remove cost-ineffective, energy-wasting products from the marketplace and stimulate the development of cost-effective, energy-efficient technology. Energy-efficiency labels and standards for appliances, equipment, and lighting products deserve to be among the first policy tools considered by a country's energy policy makers. The U.S. Agency for International Development (USAID) and several other organizations identified on the cover of this guidebook recognize the need to support policy makers in their efforts to implement energy-efficiency standards and labeling programs and have developed this guidebook, together with the Collaborative Labeling and Appliance Standards Program (CLASP), as a primary reference. This second edition of the guidebook was prepared over the course of the past year, four years after the preparation of the first edition, with a significant contribution from the authors and reviewers mentioned previously. Their diligent participation helps maintain this book as the international guidance tool it has become. The lead authors would like to thank the members of the Communications Office of the Environmental Energy Technologies Division, Lawrence Berkeley National Laboratory for their support in the development, production, and distribution of the guidebook. This guidebook is designed as a manual for government officials and others around the world responsible for developing, implementing, enforcing, monitoring, and maintaining labeling and standards setting programs. It discusses the pros and cons of adopting energy-efficiency labels and standards and describes the data, facilities, and institutional and human resources needed for these programs. It provides guidance on the design, development, implementation, maintenance, and evaluation of the programs and on the design of the labels and standards themselves. In addition, it directs the reader to references and other resources likely to be useful in conducting the activities described and includes a chapter on energy policies and programs that complement appliance efficiency labels and standards. This guidebook attempts to reflect the essential framework of labeling and standards programs. It is the intent of the authors and sponsor to distribute copies of this book worldwide, at no charge, for the general public benefit. The guidebook is also available on the web at www.clasponline.org and may be downloaded to be used intact or piecemeal for whatever beneficial purposes readers may conceive.

Wiel, Stephen; McMahon, James E.

2005-04-28T23:59:59.000Z

25

Realized and prospective impacts of U.S. energy efficiency standards for residential appliances: 2004 update  

E-Print Network [OSTI]

AND ACRONYMS AAUE AFUE AHAM ARI LBNL NPV TSD Average annualAppliance Manufacturers (AHAM) and the Air-Conditioning andcapacity. Historical Data AHAM publishes estimates of

Meyers, Stephen; McMahon, James; McNeil, Michael

2005-01-01T23:59:59.000Z

26

Energy-Efficiency Labels and Standards: A Guidebook for Appliances, Equipment, and Lighting - 2nd Edition  

E-Print Network [OSTI]

of Home Appliance Manufacturers (AHAM) program for room airfeatures. In the case of AHAM’s certification program forenergy labels. Meanwhile, AHAM notes the revised ratings in

Wiel, Stephen; McMahon, James E.

2005-01-01T23:59:59.000Z

27

Realized and Projected Impacts of U.S. Energy Efficiency Standards for Residential and Commercial Appliances  

E-Print Network [OSTI]

Appliance Manufacturers (AHAM) 2 and the Air-Conditioningor specific analytical issues. AHAM publishes time series ofroom air conditioners. The AHAM data are based on laboratory

Meyers, Stephen P.

2008-01-01T23:59:59.000Z

28

8th Semi-Annual Report to Congress on Appliance Energy Efficiency...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Congress on Appliance Energy Efficiency Rulemakings - Implementation Report: Energy Conservation Standards Activities 8th Semi-Annual Report to Congress on Appliance Energy...

29

2nd Semi-Annual Report to Congress on Appliance Energy-Efficiency...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Congress on Appliance Energy-Efficiency Rulemakings - Implementation Report: Energy Conservation Standards Activities 2nd Semi-Annual Report to Congress on Appliance...

30

5th Semi-Annual Report to Congress on Appliance Energy-Efficiency...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Congress on Appliance Energy-Efficiency Rulemakings - Implementation Report: Energy Conservation Standards Activities 5th Semi-Annual Report to Congress on Appliance...

31

6th Semi-Annual Report to Congress on Appliance Energy Efficiency...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Congress on Appliance Energy Efficiency Rulemakings - Implementation Report: Energy Conservation Standards Activities 6th Semi-Annual Report to Congress on Appliance Energy...

32

16th Semi-Annual Report to Congress on Appliance Energy Efficiency...  

Office of Environmental Management (EM)

Congress on Appliance Energy Efficiency Rulemakings - Implementation Report: Energy Conservation Standards Activities 16th Semi-Annual Report to Congress on Appliance Energy...

33

9th Semi-Annual Report to Congress on Appliance Energy Efficiency...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Congress on Appliance Energy Efficiency Rulemakings - Implementation Report: Energy Conservation Standards Activities 9th Semi-Annual Report to Congress on Appliance Energy...

34

4th Semi-Annual Report to Congress on Appliance Energy-Efficiency...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Congress on Appliance Energy-Efficiency Rulemakings - Implementation Report: Energy Conservation Standards Activities 4th Semi-Annual Report to Congress on Appliance...

35

10th Semi-Annual Report to Congress on Appliance Energy Efficiency...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Congress on Appliance Energy Efficiency Rulemakings - Implementation Report: Energy Conservation Standards Activities 10th Semi-Annual Report to Congress on Appliance Energy...

36

12th Semi-Annual Report to Congress on Appliance Energy Efficiency...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Congress on Appliance Energy Efficiency Rulemakings - Implementation Report: Energy Conservation Standards Activities 12th Semi-Annual Report to Congress on Appliance Energy...

37

3rd Semi-Annual Report to Congress on Appliance Energy-Efficiency...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Congress on Appliance Energy-Efficiency Rulemakings - Implementation Report: Energy Conservation Standards Activities 3rd Semi-Annual Report to Congress on Appliance...

38

14th Semi-Annual Report to Congress on Appliance Energy Efficiency...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

on Appliance Energy Efficiency Rulemakings Implementation Report: Energy Conservation Standards Activities 14th Semi-Annual Report to Congress on Appliance Energy...

39

15th Semi-Annual Report to Congress on Appliance Energy Efficiency...  

Office of Environmental Management (EM)

Congress on Appliance Energy Efficiency Rulemakings - Implementation Report: Energy Conservation Standards Activities 15th Semi-Annual Report to Congress on Appliance Energy...

40

1st Semi-Annual Report to Congress on Appliance Energy-Efficiency...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Congress on Appliance Energy-Efficiency Rulemakings - Implementation Report: Energy Conservation Standards Activities 1st Semi-Annual Report to Congress on Appliance...

Note: This page contains sample records for the topic "appliance efficiency standards" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

7th Semi-Annual Report to Congress on Appliance Energy Efficiency...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Congress on Appliance Energy Efficiency Rulemakings - Implementation Report: Energy Conservation Standards Activities 7th Semi-Annual Report to Congress on Appliance Energy...

42

17TH SEMI-ANNUAL REPORT TO CONGRESS ON APPLIANCE ENERGY EFFICIENCY...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

TO CONGRESS ON APPLIANCE ENERGY EFFICIENCY RULEMAKINGS - IMPLEMENTATION REPORT: ENERGY CONSERVATION STANDARDS ACTIVITIES 17TH SEMI-ANNUAL REPORT TO CONGRESS ON APPLIANCE ENERGY...

43

Energy Efficiency Product Standards  

Broader source: Energy.gov [DOE]

'' Note: The federal government has imposed and updated appliance efficiency standards through several legislative acts,* and now has standards in place or under development for 30 classes of...

44

Appliance Standards and Rulemaking Federal Advisory Committee...  

Energy Savers [EERE]

of the National Energy Laboratories Buildings Home About Emerging Technologies Residential Buildings Commercial Buildings Appliance & Equipment Standards Building Energy Codes...

45

PROJECTED REGIONAL IMPACTS OF APPLIANCE EFFICIENCY STANDARDS FOR THE U.S. RESIDENTIAL SECTOR  

E-Print Network [OSTI]

was supported by the Assistant Secretary for Energy Efficiency and Renewable Energy, Office of Building.S. for a large number of residential end-uses. This analysis assesses the potential energy, dollar, and carbon presented in this report represent lower bounds to the true benefits. Energy savings from the standards

46

Appliance Standards and Rulemaking Federal Advisory Committee...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Issuance Appliance Standards and Rulemaking Federal Advisory Committee (ASRAC) - Central Air Conditioner Regional Standards Enforcement Working Group; Notice of Open Meetings...

47

Realized and prospective impacts of U.S. energy efficiency standards for residential appliances: 2004 update  

SciTech Connect (OSTI)

This study estimated energy, environmental and consumer economic impacts of U.S. federal residential energy efficiency standards that became effective in the 1988-2001 period or will take effect by the end of 2007. These standards have been the subject of in-depth analyses conducted as part of DOE's standards rulemaking process. This study drew on those analyses, but updated certain data and developed a common framework and assumptions for all of the products in order to estimate realized impacts and to update projected impacts. We estimate that the considered standards will reduce residential primary energy consumption and CO{sub 2} emissions in 2020 by 8% compared to the levels expected without any standards. They will save a cumulative total of 34 quads by 2020, and 54 quads by 2030. The estimated cumulative net present value of consumer benefit amounts to $93 billion by 2020, and grows to $125 billion by 2030. The overall benefit/cost ratio of cumulative consumer impacts is 2.45 to 1. While the results of this study are subject to a fair degree of uncertainty, we believe that the general conclusions--DOE's energy efficiency standards save significant quantities of energy (and associated carbon emissions) and reduce consumers' net costs--are robust.

Meyers, Stephen; McMahon, James; McNeil, Michael

2005-06-24T23:59:59.000Z

48

Realized and projected impacts of U.S. federal efficiency standards for residential appliances  

SciTech Connect (OSTI)

This study estimated energy, environmental and consumer economic impacts of U.S. Federal residential energy efficiency standards that became effective in the 1988-2001 period or will take effect by the end of 2007. These standards have been the subject of in-depth analyses conducted as part of DOE's standards rulemaking process. This study drew on those analyses, but updated certain data and developed a common framework and assumptions for all of the products. We estimate that the considered standards will reduce residential primary energy consumption and CO{sub 2} emissions in 2020 by 8-9% compared to the levels expected without any standards. They will save a cumulative total of 25-30 quads by the year 2015, and 60 quads by 2030. The estimated cumulative net present value of consumer benefit amounts to nearly $80 billion by 2015, and grows to $130 billion by 2030. The overall benefit/cost ratio of cumulative consumer impacts in the 1987-2050 period is 2.75:1. The cumulative cost of DOE's program to establish and implement the standards is in the range of $200-250 million.

Meyers, Stephen; McMahon, James; McNeil, Michael; Liu, Xiaomin

2002-06-01T23:59:59.000Z

49

Earthjustice, Appliance Standards Awareness Project, Natural...  

Office of Environmental Management (EM)

Council - Comments in response to DOE solicitation of views on the implementation of test procedure waivers for large capacity clothes washers Earthjustice, Appliance Standards...

50

Realized and Projected Impacts of U.S. Energy Efficiency Standards for Residential and Commercial Appliances  

E-Print Network [OSTI]

Report on Potential Impact of Possible Energy Efficiencyenergy saver”) lamps based on a report analyzing potential lamp efficiency

Meyers, Stephen P.

2008-01-01T23:59:59.000Z

51

Realized and Projected Impacts of U.S. Energy Efficiency Standards for Residential and Commercial Appliances  

E-Print Network [OSTI]

Standards for Consumer Products: Room Air Conditioners,Energy Savings -- Residential Products Room Air Conditionersfor Consumer Products: Residential Central Air Conditioners

Meyers, Stephen P.

2008-01-01T23:59:59.000Z

52

Status of China's Energy Efficiency Standards and Labels for Appliances and International Collaboration  

E-Print Network [OSTI]

testing in 2006 for refrigerators, freezers and room air-three products (refrigerators, freezers, air-conditionersStandards Domestic refrigerators/freezers* Room air

Zhou, Nan

2010-01-01T23:59:59.000Z

53

Projected Regional Impacts of Appliance Efficiency Standards for the U.S. Residential Sector  

E-Print Network [OSTI]

standards Other Refrigerators and Freezers DWsandCWs: g aioo%- Other | Refrigerators and Freezers Gas and oil watermarket prices for refrigerators and freezers from 1987 to

Koomey, J.G.

2010-01-01T23:59:59.000Z

54

Projected Regional Impacts of Appliance Efficiency Standards for the U.S. Residential Sector  

E-Print Network [OSTI]

Conservation and Renewable Energy, Building EquipmentEnergy Efficiency and Renewable Energy, Building Equipmentand Renewable Energy, Office of Building Technologies, State

Koomey, J.G.

2010-01-01T23:59:59.000Z

55

How to Make Appliance Standards Work: Improving Energy and Water Efficiency Test Procedures  

E-Print Network [OSTI]

Water Heaters With Input Ratings Above 75,000 Btu per Hour, Circulating and Instantaneous” [ANSI Z21.10.3a] American National StandardsWater Heaters With Input Ratings Above 75,000 Btu Per Hour, Circulating and Instantaneous” [ANSI Z21.10.3a] American National Standards

Lutz, Jim

2012-01-01T23:59:59.000Z

56

How to Make Appliance Standards Work: Improving Energy and Water Efficiency Test Procedures  

E-Print Network [OSTI]

efficiency of commercial water heaters and hot water supplyheat pump water heaters). http://edocket.access.gpo.gov/2004/CSA 4.3- 2004 Gas Water Heaters - Volume III, Storage

Lutz, Jim

2012-01-01T23:59:59.000Z

57

Creating and Implementing a Regularized Monitoring and Enforcement System for China's Mandatory Standards and Energy Information Label for Appliances  

E-Print Network [OSTI]

Appliance Manufacturers (AHAM). Typically, the efficiency ofof Home Appliance Manufactures (AHAM); and the Gas Appliance

Lin, Jiang

2008-01-01T23:59:59.000Z

58

State Energy Efficient Appliance Rebate Program (SEEARP) American...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

State Energy Efficient Appliance Rebate Program (SEEARP) American Recovery and Reinvestment Act (ARRA) Funding Opportunity Number: DE-FOA-0000119 State Energy Efficient Appliance...

59

Incorporating Experience Curves in Appliance Standards Analysis  

E-Print Network [OSTI]

trade associations such as AHAM, GAMA, AHRI, and ApplianceAppliance Manufacturers (AHAM), Gas Appliance Manufacturersas Appliance Magazine and the AHAM Fact Book. In most cases,

Desroches, Louis-Benoit

2012-01-01T23:59:59.000Z

60

Sales Tax Holiday for Energy-Efficient Appliances  

Broader source: Energy.gov [DOE]

In November 2007, Maryland enacted legislation creating a sales and use tax "holiday" for certain energy-efficient appliances, beginning in 2011. Under the law, qualifying appliances purchased...

Note: This page contains sample records for the topic "appliance efficiency standards" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Appliance Standards and Building Codes  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-Up fromDepartment ofEnergy NaturalEnergy 7Appliance Rebates:APPENDIXBuildings

62

11th Semi-Annual Report to Congress on Appliance Energy Efficiency...  

Office of Environmental Management (EM)

1th Semi-Annual Report to Congress on Appliance Energy Efficiency Rulemakings - Implementation Report: Energy Conservation Standards Activities 11th Semi-Annual Report to Congress...

63

Electricity savings from residential appliance standards in Sweden  

SciTech Connect (OSTI)

This paper discusses the energy savings that could be obtained in Sweden by instituting specific standards for five appliances: Refrigerators, freezers, dishwashers, clothes washers, and clothes dryers. At the present time, Sweden has no minimum energy efficiency standards for residential appliances. This paper discusses the energy savings that could be obtained by instituting specific standards for five product types (refrigerators, freezers, dishwashers, clothes washers, and dryers) starting in 1995. A methodology similar to that used in analyses for the European Community was employed in this study. In the Swedish study, we used appliance test data developed by the Swedish consumer agency, Konsument Verket, to estimate new unit energy consumption for each product type. Shipments, saturations, energy use, and demographic data were input to a spreadsheet model that sums energy consumption for each product type over the period 1990--2010. Both a base case and a standards case scenario are simulated for each of the five appliance types. It was found that electricity use for these five products can be reduced by 12% over the time period from 1990--2010. Most of the energy savings come from instituting efficiency standards for refrigerators and freezers. For each product class type, the impact on manufacturer offerings is discussed. For example, for simple refrigerators, eleven 1990 models meet the 1995 standard and six models meet the 2000 standard out of a total of 63 models.

Turiel, I. [Lawrence Berkeley Lab., CA (United States); Lebot, B. [Agence Francaise pour la Maitrise de l`Energie, 75 - Paris (France)

1993-04-01T23:59:59.000Z

64

Energy Efficient Appliance Sales Soar in North Carolina | Department...  

Broader source: Energy.gov (indexed) [DOE]

Energy Efficient Appliance Sales Soar in North Carolina Energy Efficient Appliance Sales Soar in North Carolina July 23, 2010 - 11:00am Addthis Joshua DeLung What does this mean...

65

2014-08-19 Issuance Appliance Standards and Rulemaking Federal...  

Energy Savers [EERE]

2014-08-19 Issuance Appliance Standards and Rulemaking Federal Advisory Committee (ASRAC) - Central Air Conditioner Regional Standards Enforcement Working Group; Notice of Open...

66

Incorporating Experience Curves in Appliance Standards Analysis  

SciTech Connect (OSTI)

The technical analyses in support of U.S. energy conservation standards for residential appliances and commercial equipment have typically assumed that manufacturing costs and retail prices remain constant during the projected 30-year analysis period. There is, however, considerable evidence that this assumption does not reflect real market prices. Costs and prices generally fall in relation to cumulative production, a phenomenon known as experience and modeled by a fairly robust empirical experience curve. Using price data from the Bureau of Labor Statistics, and shipment data obtained as part of the standards analysis process, we present U.S. experience curves for room air conditioners, clothes dryers, central air conditioners, furnaces, and refrigerators and freezers. These allow us to develop more representative appliance price projections than the assumption-based approach of constant prices. These experience curves were incorporated into recent energy conservation standards for these products. The impact on the national modeling can be significant, often increasing the net present value of potential standard levels in the analysis. In some cases a previously cost-negative potential standard level demonstrates a benefit when incorporating experience. These results imply that past energy conservation standards analyses may have undervalued the economic benefits of potential standard levels.

Garbesi, Karina; Chan, Peter; Greenblatt, Jeffery; Kantner, Colleen; Lekov, Alex; Meyers, Stephen; Rosenquist, Gregory; Buskirk, Robert Van; Yang, Hung-Chia; Desroches, Louis-Benoit

2011-10-31T23:59:59.000Z

67

2008 BUILDING ENERGY EFFICIENCY STANDARDS  

E-Print Network [OSTI]

2008 BUILDING ENERGY EFFICIENCY STANDARDS C A L I F O R N I A E N E RGY CO M M I S S I O N Buildings and Appliances Office #12;Acknowledgments The Building Energy Efficiency Standards (Standards the adoption of the 2008 Building Energy Efficiency Standards to Jon Leber, PE, (November 13, 1947 - February

68

Appliance Standards Program Schedule - CCE Overview and Update...  

Broader source: Energy.gov (indexed) [DOE]

Meeting CCE Overview and Update Presenation, dated April 13, 2011 NEMA Distribution Transformers, CCE Overview and Update presentation, dated 05242011 Appliance Standards Program...

69

Kitchen Appliance Upgrades Improve Water Efficiency at DOD Exchange...  

Broader source: Energy.gov (indexed) [DOE]

Kitchen Appliance Upgrades Improve Water Efficiency at DOD Exchange Facilities Case study details the U.S. Department of Defense (DOD) Exchange (formerly the Army and Air Force...

70

Kitchen Appliance Upgrades Improve Water Efficiency at DOD Exchange...  

Broader source: Energy.gov (indexed) [DOE]

Kitchen Appliance Upgrades Improve Water Efficiency at DOD Exchange Facilities: Best Management Practice Case Study 11: Commercial Kitchen Equipment (Brochure), Federal Energy...

71

Kitchen Appliance Upgrades Improve Water Efficiency at DOD Exchange Facilities  

Broader source: Energy.gov [DOE]

Case study details the Exchange (formerly the Army and Air Force Exchange Service), which took a leadership role in kitchen appliance upgrades to improve water efficiency by integrating water efficiency concepts into the organization's overall sustainability plan and objectives.

72

Smart Meter Deployment Optimization for Efficient Electrical Appliance State Monitoring  

E-Print Network [OSTI]

Smart Meter Deployment Optimization for Efficient Electrical Appliance State Monitoring Xiaohong approaches generally require large-scale smart sensor/meter networks, and thus suffer from the high to optimize the smart meter deployments to track the on/off states of the massive electrical appliances

Wang, Yongcai

73

Arnold Schwarzenegger 2010 APPLIANCE  

E-Print Network [OSTI]

: Appliance Efficiency Regulations, appliance standards, refrigerators, air conditioners, space heaters, water heaters, pool heaters, pool pumps, electric spas, pool pump motors, plumbing fittings, plumbing fixtures, showerheads, spray valves, faucets, tub spout diverters, water closets, urinals, ceiling fans, ceiling fan

74

APPLIANCE EFFICIENCY REGULATIONS FOR REFRIGERATORS AND FREEZERS  

E-Print Network [OSTI]

CENTRAL AIR CONDITIONERS GAS SPACE HEATERS WATER HEATERS PLUMBING FITTINGS FLUORESCENT LAMP BALLASTS LUMINAIRES GAS COOKING APPLIANCES AND GAS POOL HEATERS SEPTEMBER 1992 #12;TABLE OF CONTENTS APPLIANCE) Gas space heaters, excluding the following types: (1) gravity type central furnaces; (2) heaters

75

Appliances and Commercial Equipment Standards: Guidance  

Energy Savers [EERE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion |Energy UsageAUDITVehiclesTankless orA BRIEF HISTORYAgencyLocal|Annual Uncosted.Appliance

76

Energy-Efficient Appliance Manufacturing Tax Credit  

Broader source: Energy.gov [DOE]

'''''Note: This tax credit expired at the end of 2011. The American Taxpayer Relief Act of 2012 retroactively renewed this tax credit for certain appliances manufactured in 2012 and 2013. '''''

77

Appliance Equipment Standards Northwest Impact Study  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth (AOD)ProductssondeadjustsondeadjustAbout theOFFICEAmes LaboratoryAntonyaAppeals4Appendix TFIELD-2014Appliance

78

Refrigerator Efficiency in Ghana: Tailoring an appliance market transformation program design for Africa  

E-Print Network [OSTI]

and organizational long-term commitment to furthering energy efficiency.organizational environment. The approach for appliance energy efficiency

Ben Hagan, Essel; Van Buskirk, Robert; Ofosu-Ahenkorah, Alfred; McNeil, Michael A.

2006-01-01T23:59:59.000Z

79

Roaring Fork Valley- Energy Efficient Appliance Program  

Broader source: Energy.gov [DOE]

The Aspen Community Office for Resource Efficiency (CORE) promotes renewable energy, energy efficiency and green building techniques in western Colorado's Roaring Fork Valley. For customers who...

80

California Appliance Efficiency Database for Consumers  

E-Print Network [OSTI]

several products that use electricity or water, including: · Airconditioners,heaters)--the higher the SEER, the more efficient the air conditioner is. A water heater's energy factor determines its efficiency, so look for the water heater with the highest energy factor. Every type of product listed has its

Note: This page contains sample records for the topic "appliance efficiency standards" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Energy Efficiency Appliance Standards: Where do we stand, how far can we go and how do we get there? An analysis across several economies  

E-Print Network [OSTI]

Scoping Study on Energy-Efficiency Market Transformation byW. , Eto, J. , 1996. Market barriers to energy efficiency: Ato reduce energy consumption as their market penetration

Letschert, Virginie E.

2014-01-01T23:59:59.000Z

82

Efficiency Maine Residential Appliance Program (Maine)  

Broader source: Energy.gov [DOE]

Efficiency Maine offers rebates for the purchase of Energy Star certified water heaters, and ductless heat pumps. Purchases must be made between September 1, 2013 and June 30, 2014. See the...

83

Four-County EMC- Residential Energy Efficiency Appliance Rebate Program  

Broader source: Energy.gov [DOE]

Four-County EMC offers its customers $50 rebates for purchasing certain Energy Star appliances. Eligible appliances include refrigerators, dishwashers, clothes washers and freezers. The rebates are...

84

Appliance energy efficiency in new home construction. Final report  

SciTech Connect (OSTI)

A survey of 224 builders was conducted to which 160 builders responded. Each respondent completed between one and seven separate questionnaires. Each of the seven questionnaires were designed to collect information about one type of equipment or major appliance. These are: heat pump; heating system; air conditioner; domestic water heater; dishwasher; range; and refrigerator. Analysis of the resulting 406 questionnaires indicated that builders were primarily responsible for brand selection. These choices were made primarily without regard for the energy efficiency of the product. A similar apparent lack of consideration of energy efficiency during brand and model selection was found among home buyers and specialized subcontractors.

Not Available

1980-11-30T23:59:59.000Z

85

Residential appliances technology atlas  

SciTech Connect (OSTI)

Residential appliance technology and efficiency opportunities for refrigerators and freezers, cooking appliances, clothes washers and dryers, dishwashers, and some often-ignored household devices such as spas, pool pumps, waterbed heaters, televisions, and home computers are thoroughly covered in this Atlas. The US appliance market, fuel shares, efficiency standards, labeling, and advances in home automation, design for recycling, and CFC issues are also discussed. The resource section contains lists of appliance manufacturers and distributors, and trade, professional, and governmental organizations, a summary of key resources for further information, and an index.

NONE

1994-12-31T23:59:59.000Z

86

Energy-Efficient Appliances: Selection and maintenance guidelines for major home appliances (Office of Building Technology, State and Community Programs (BTS) Technology Fact Sheet)  

SciTech Connect (OSTI)

Fact sheet for homeowners and contractors that explains the energy savings potential of efficient appliances, how to purchase them, and how to maintain them.

Southface Energy Institute; U.S. Department of Energy's Oak Ridge National Laboratory

2001-08-15T23:59:59.000Z

87

Max Tech and Beyond: Maximizing Appliance and Equipment Efficiency by Design  

SciTech Connect (OSTI)

It is well established that energy efficiency is most often the lowest cost approach to reducing national energy use and minimizing carbon emissions. National investments in energy efficiency to date have been highly cost-effective. The cumulative impacts (out to 2050) of residential energy efficiency standards are expected to have a benefit-to-cost ratio of 2.71:1. This project examined energy end-uses in the residential, commercial, and in some cases the industrial sectors. The scope is limited to appliances and equipment, and does not include building materials, building envelopes, and system designs. This scope is consistent with the scope of DOE's appliance standards program, although many products considered here are not currently subject to energy efficiency standards. How much energy could the United States save if the most efficient design options currently feasible were adopted universally? What design features could produce those savings? How would the savings from various technologies compare? With an eye toward identifying promising candidates and strategies for potential energy efficiency standards, the Max Tech and Beyond project aims to answer these questions. The analysis attempts to consolidate, in one document, the energy savings potential and design characteristics of best-on-market products, best-engineered products (i.e., hypothetical products produced using best-on-market components and technologies), and emerging technologies in research & development. As defined here, emerging technologies are fundamentally new and are as yet unproven in the market, although laboratory studies and/or emerging niche applications offer persuasive evidence of major energy-savings potential. The term 'max tech' is used to describe both best-engineered and emerging technologies (whichever appears to offer larger savings). Few best-on-market products currently qualify as max tech, since few apply all available best practices and components. The three primary analyses presented in this report are: Nevertheless, it is important to analyze best-on-market products, since data on truly max tech technologies are limited. (1) an analysis of the cross-cutting strategies most promising for reducing appliance and equipment energy use in the U.S.; (2) a macro-analysis of the U.S. energy-saving potential inherent in promising ultra-efficient appliance technologies; and (3) a product-level analysis of the energy-saving potential.

Desroches, Louis-Benoit; Garbesi, Karina

2011-07-20T23:59:59.000Z

88

Energy efficiency choice in the purchase of residential appliances  

SciTech Connect (OSTI)

This paper provides a quantitative analysis of the behavior of the market for the purchase of energy efficiency in residential appliances and heating and cooling equipment. We examine the historical efficiency choices over the period 1972 to 1980 for eight consumer products: gas central space heaters, oil central space heaters, room air conditioners, central air conditioners, electric water heaters, gas water heaters, refrigerators, and freezers. We characterize the behavior of the market for these products by an aggregate market discount rate. Except for air conditioners, the observed discount rates are much higher than real interest rates or the discount rates commonly used in life-cycle cost analysis of consumer choice. They appear to be relatively constant, even though fuel prices escalated rapidly over the time period. We conclude from these results that the market for energy efficiency is not performing well. Several explanations of the under investment in efficiency are proposed: (1) lack of information about the costs and benefits of energy efficiency; (2) prevalence of third party purchasers; (3) unavailability of highly efficient equipment without other features; (4) long manufacturing lead times; and (5) other marketing strategies.

Ruderman, H.; Levine, M.D.; McMahon, J.E.

1984-07-01T23:59:59.000Z

89

Issues in federal preemption of state appliance energy efficiency regulations  

SciTech Connect (OSTI)

The findings and conclusions of the analysis of the various issues involved in the federal preemption of state regulations for the DOE no standard rule on covered appliances are summarized. The covered products are: refrigerators, refrigerator-freezers, freezers, clothes dryers, kitchen ranges and ovens, water heaters (excluding heat pump water heaters), room air conditioners, central air conditioners (excluding heat pumps), and furnaces. A detailed discussion of the rationale for the positions of groups offering comment for the record is presneted. The pertinent categories of state and local regulations and programs are explained, then detailed analysis is conducted on the covered products and regulations. Issues relating to the timing of preemption of state regulations are discussed, as well as issues relating to burden of proof, contents of petitions for exemptions from preemption, criteria for evaluating petitions, and procedural and other issues. (LEW)

Fang, J.M.; Balistocky, S.; Schaefler, A.M.

1982-12-01T23:59:59.000Z

90

Accelerating the Adoption of Second-Tier Reach Standards forApplicable Appliance Products in China  

SciTech Connect (OSTI)

The minimum energy efficiency standards program for household appliances in China was initiated in 1989. Since 1996, CLASP and its implementing partner, LBNL, have assisted China in developing 11 minimum energy performance standards (MEPS) for 9 products and endorsement labels for 11 products including: refrigerators; air conditioners; clothes washers; televisions; printers; computers; monitors; fax machines; copiers; DVD/VCD players; external power supplies; and set-top boxes (under development). Before 2003, China's traditional approach to standards development involved small increases in efficiency requirements for implementation within 6 months of a standard's approval. Since 2003, China has adopted a new approach in setting MEPS. This new approach involves the development of two tiers of standards--one for initial implementation and a second tier at a more aggressive level of energy efficiency for implementation three to five years later. The second-tier standard is also referred to as a 'reach standard'. Reach standards have now been developed in China for: color TVs; refrigerators; air conditioners; and external power supplies. This report is presented in five sections. After the introduction in Section 1, Section 2 analyzes the distribution of the efficiency of refrigerators and air-conditioners in China based on data collected by the China Energy Label Center for the mandatory energy information label program. The results provide an assessment of the adoption of reach standards for these two products. Section 3 summarizes on-going collaborations with Shanghai related to early local adoption of reach standards, and presents both the impact and an analysis of barriers to the local adoption of reach standard for air-conditioners. Section 4 offers suggestions for local governments on how to move forward in adopting reach standards in their localities and concludes with a summary of the results and a plan for developing local capacity in order to achieve success in adopting reach standards.

Lin, Jiang; Fridley, David

2007-03-01T23:59:59.000Z

91

Appliance Standards and Rulemaking Federal Advisory Committee: Cancellation of Open Meetings  

Broader source: Energy.gov [DOE]

The Department of Energy (DOE) announces the cancellation of open meetings for the Commercial and Industrial Pumps Working Group of the Appliance Standards and Rulemaking Federal Advisory Committee (ASRAC) scheduled for July 23 through July 25, 2014.

92

Impacts of China's Current Appliance Standards and Labeling Program to 2020  

E-Print Network [OSTI]

58: Historical and Forecast China Average Household Size,P ROGRAM Impacts of China’s Current Appliance Standards and68 Implications for China’s Current Energy Policy and

Fridley, David; Aden, Nathaniel; Zhou, Nan; Lin, Jiang

2007-01-01T23:59:59.000Z

93

appliance efficiency program: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

of California eScholarship Repository Summary: 2002. Commercial Cooking Appliance Technology Assessment.technology costs reported in Table 1 are not included in these plots...

94

Sales Tax Holiday for Energy-Efficient Appliances  

Broader source: Energy.gov [DOE]

The state of Missouri offers consumers a seven-day ''exemption from state sales taxes'' on certain Energy Star certified new appliances. The state sales tax holiday, known as the "Show-Me Green...

95

Appliance and Equipment Standards Program | Department of Energy  

Energy Savers [EERE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion |Energy UsageAUDITVehicles » Alternative FuelNewsWashington AutoYourAppliance and Equipment

96

Appliance and Equipment Standards Fact Sheet | Department of Energy  

Energy Savers [EERE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion |Energy UsageAUDITVehiclesTankless orA BRIEF HISTORYAgencyLocal|Annual Uncosted.Appliance and

97

Best Practices: Policies for Building Efficiency and Emerging Technologies  

Office of Energy Efficiency and Renewable Energy (EERE)

Information about appliance standards, building energy codes, ENERGY STAR program and tax incentives for building efficiency.

98

A Global Review of Incentive Programs to Accelerate Energy-Efficient Appliances and Equipment  

SciTech Connect (OSTI)

Incentive programs are an essential policy tool to move the market toward energy-efficient products. They offer a favorable complement to mandatory standards and labeling policies by accelerating the market penetration of energy-efficient products above equipment standard requirements and by preparing the market for increased future mandatory requirements. They sway purchase decisions and in some cases production decisions and retail stocking decisions toward energy-efficient products. Incentive programs are structured according to their regulatory environment, the way they are financed, by how the incentive is targeted, and by who administers them. This report categorizes the main elements of incentive programs, using case studies from the Major Economies Forum to illustrate their characteristics. To inform future policy and program design, it seeks to recognize design advantages and disadvantages through a qualitative overview of the variety of programs in use around the globe. Examples range from rebate programs administered by utilities under an Energy-Efficiency Resource Standards (EERS) regulatory framework (California, USA) to the distribution of Eco-Points that reward customers for buying efficient appliances under a government recovery program (Japan). We found that evaluations have demonstrated that financial incentives programs have greater impact when they target highly efficient technologies that have a small market share. We also found that the benefits and drawbacks of different program design aspects depend on the market barriers addressed, the target equipment, and the local market context and that no program design surpasses the others. The key to successful program design and implementation is a thorough understanding of the market and effective identification of the most important local factors hindering the penetration of energy-efficient technologies.

de la Rue du Can, Stephane; Phadke, Amol; Leventis, Greg; Gopal, Anand

2013-08-01T23:59:59.000Z

99

Max Tech Appliance Design: Potential for Maximizing U.S. Energy Savings through Standards  

SciTech Connect (OSTI)

This study surveyed the technical potential for efficiency improvements in 150 categories of appliances and equipment representing 33 quads of primary energy use across the US economy in 2010 and (1) documented efficient product designs, (2) identified the most promising cross-cutting strategies, and (3) ranked national energy savings potential by end use. Savings were estimated using a method modeled after US Department of Energy priority-setting reports - simplified versions of the full technical and economic analyses performed for rulemakings. This study demonstrates that large savings are possible by replacing products at the end-of-life with ultra-efficient models that use existing technology. Replacing the 50 top energy-saving end-uses (constituting 30 quads of primary energy consumption in 2010) with today's best-on-market equivalents would save {approx}200 quads of US primary energy over 30 years (25% of consumption anticipated there from). For the 29 products for maximum feasible savings potential could be estimated, the savings were twice as high. These results demonstrate that pushing ultra-efficient products to market could significantly escalate carbon emission reductions and is a viable strategy for sustaining large emissions reductions through standards. The results of this analysis were used by DOE for new coverage prioritization, to identify key opportunities for product prototyping and market development, and will leverage future standards rulemakings by identifying the full scope of maximum feasible technology options. High leverage products include advances lighting systems, HVAC, and televisions. High leverage technologies include electronic lighting, heat pumps, variable speed motors, and a host of controls-related technologies.

Garbesi, Karina; Desroches, Louis-Benoit; Bolduc, Christopher; Burch, Gabriel; Hosseinzadeh, Griffin; Saltiel, Seth

2011-05-06T23:59:59.000Z

100

2015-02-25 Issuance: Appliance Standards and Rulemaking Federal Advisory Committee: Notice of Open Meeting and Webinar  

Broader source: Energy.gov [DOE]

This document is a pre-publication Federal Register notice of open meeting and webinar regarding the Appliance Standards and Rulemaking Federal Advisory Committee, as issued by the Deputy Assistant Secretary for Energy Efficiency on February 25, 2015. Though it is not intended or expected, should any discrepancy occur between the document posted here and the document published in the Federal Register, the Federal Register publication controls. This document is being made available through the Internet solely as a means to facilitate the public's access to this document.

Note: This page contains sample records for the topic "appliance efficiency standards" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Summary of 2008 Building Energy Efficiency Standards Changes Summary of Changes For  

E-Print Network [OSTI]

Summary of 2008 Building Energy Efficiency Standards Changes Summary of Changes For California 2008 Building Energy Efficiency Standards Mazi Shirakh, P.E. Project Manager, Building Energy Efficiency Standards Buildings and Appliances Office California Energy Commission Adopted on April 23, 2008 #12;Summary

102

Appliance Standard Program - The FY 2003 Priority -Setting Summary...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Conservation Standard for Small, Large, and Very Large Air-Cooled Commercial Package Air Conditioning and Heating Equipment; Notice of Proposed Rulemaking and Public Meeting...

103

Assembling Appliances Standards from a Basket of Functions  

SciTech Connect (OSTI)

Rapid innovation in product design challenges the current methodology for setting standards and labels, especially for electronics, software and networking. Major problems include defining the product, measuring its energy consumption, and choosing the appropriate metric and level for the standard. Most governments have tried to solve these problems by defining ever more specific product subcategories, along with their corresponding test methods and metrics. An alternative approach would treat each energy-using product as something that delivers a basket of functions. Then separate standards would be constructed for the individual functions that can be defined, tested, and evaluated. Case studies of thermostats, displays and network equipment are presented to illustrate the problems with the classical approach for setting standards and indicate the merits and drawbacks of the alternative. The functional approach appears best suited to products whose primary purpose is processing information and that have multiple functions.

Siderious, Hans-Paul; Meier, Alan

2014-08-11T23:59:59.000Z

104

Effect of Energy Efficiency Standards on Natural Gas Prices  

SciTech Connect (OSTI)

A primary justification for the establishment of energy efficiency standards for home appliances is the existence of information deficiencies and externalities in the market for appliances. For example, when a long-term homeowner purchases a new gas-fired water heater, she will maximize the value of her purchase by comparing the life-cycle cost of ownership of available units, including both total installed cost - purchase price plus installation costs - and operating cost in the calculus. Choice of the appliance with the lowest life-cycle costs leads to the most economically efficient balance between capital cost and fuel cost. However, if the purchaser's expected period of ownership is shorter than the useful life of the appliance, or the purchaser does not pay for the fuel used by the appliance, as is often the case with rental property, fuel cost will be external to her costs, biasing her decision toward spending less on fuel efficiency and resulting in the purchase of an appliance with greater than optimal fuel usage. By imposing an efficiency standard on appliances, less efficient appliances are made unavailable, precluding less efficient purchases and reducing fuel usage. The reduction in fuel demanded by residential users affects the total demand for such fuels as natural gas, for example. Reduced demand implies that residential customers are willing to purchase less gas at each price level. That is, the demand curve, labeled D{sub 0} in Figure 1, shifts to the left to D{sub 1}. If there is no change in the supply function, the supply curve will intersect the demand curve at a lower price. Residential demand is only one component of the total demand for natural gas. It is possible that total demand will decline very little if demand in other sectors increases substantially in response to a decline in the price. If demand does decrease, modeling studies generally confirm the intuition that reductions in demand for natural gas will result in reductions in its price as seen at the wellhead (Wiser 2007). The magnitude of the effect on price relative to the demand reduction, and the mechanism through which it occurs, is less well established. This report attempts to quantify the potential effects of reduced demand for natural gas in the residential sector, in response to the implementation of an energy efficiency standard for water heaters.

Carnall, Michael; Dale, Larry; Lekov, Alex

2011-07-26T23:59:59.000Z

105

A Texas Study of the Effects of the National Appliance Energy Conservation Act of 1987  

E-Print Network [OSTI]

At the present time, no legislated efficiency standards exist in Texas for residential appliances. However, the National Appliance Energy Conservation Act (NAECA) of 1987 passed by the U.S. Senate in February, 1987, sets strict nationwide limits...

Bachmeier, R.

1987-01-01T23:59:59.000Z

106

Retrospective Evaluation of Appliance Price Trends  

SciTech Connect (OSTI)

Real prices of major appliances (refrigerators, dishwashers, heating and cooling equipment) have been falling since the late 1970s despite increases in appliance efficiency and other quality variables. This paper demonstrates that historic increases in efficiency over time, including those resulting from minimum efficiency standards, incur smaller price increases than were expected by Department of Energy (DOE) forecasts made in conjunction with standards. This effect can be explained by technological innovation, which lowers the cost of efficiency, and by market changes contributing to lower markups and economies of scale in production of higher efficiency units. We reach four principal conclusions about appliance trends and retail price setting: 1. For the past several decades, the retail price of appliances has been steadily falling while efficiency has been increasing. 2. Past retail price predictions made by DOE analyses of efficiency standards, assuming constant prices over time, have tended to overestimate retail prices. 3. The average incremental price to increase appliance efficiency has declined over time. DOE technical support documents have typically overestimated this incremental price and retail prices. 4. Changes in retail markups and economies of scale in production of more efficient appliances may have contributed to declines in prices of efficient appliances.

Dale, Larry; Antinori, Camille; McNeil, Michael; McMahon, James E.; Fujita, K. Sydny

2008-07-20T23:59:59.000Z

107

Energy Department Announces January 2006 Deadline for Appliance Standards  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:Year in Review: TopEnergyIDIQ ContractEndstatesEnergy CorridorsSolarEfficiencyEnergy

108

Opportunities for regional harmonization of appliance standards and l abeling program  

SciTech Connect (OSTI)

The South Asian Regional Initiative for Energy (SARI/Energy) calls for a series of activities to promote Energy Efficiency Standards and Labeling (EES&L) of end use appliances in the region. In pursuit of this goal, the project supports several seminars and meetings that bring together policymakers and stakeholders from throughout the region. The purpose of these gatherings is to encourage a dialogue among participants as to the benefits and barriers associated with EES&L programs. In addition, it is the role of the program organizers to provide participants with the technical details necessary to make progress towards effective efficiency programs. One component of the initiative is to encourage the harmonization (alignment) of existing program components, and the pursuit of new programs coordinated at the regional level. In support of this goal, the report provides information aimed at motivating and enabling cooperative activities which will provide concrete benefits to programs in each country, whether well developed, or still in the initial planning stage. It should be emphasized that the underlying objective of the harmonization component of the SARI/Energy project is to increase the potential for success of EES&L programs of all countries involved, and to reduce burdens on manufacturers, exporters and importers in each country. Harmonization ''for it's own sake'' is not desirable, nor is it suggested that policymakers should bring their programs in line with international norms if doing so would present a disadvantage to their own efficiency programs, or to commercial interests within their country. If there is no such disadvantage, however, the program encourages alignment of policies and provides a forum at which this alignment can be pursued. The report covers several main topics, with varying emphasis. First, a general discussion of the motivation for an explicit policy of regional harmonization is given. Next, the current status of existing programs in the region are discussed in some detail. The section that follows covers the harmonization of efficiency test procedures. Special attention is given to this component of an EES&L program because it is the most critical element in terms of harmonization--having incompatible test procedures between trade partners can greatly impact the effectiveness of a program, and it can also unduly impact trade. Currently, policymakers in India and Sri Lanka are collaborating with the goal of aligning refrigerator test procedures used in their respective programs. For this reason, the section on test procedures of refrigerators goes into a significant amount of technical detail, in order to provide the clearest possible articulation of issues to be resolved in bringing the procedures into alignment. Following the discussion of test procedures, the report contains a section each on harmonization of efficiency rating levels, development of label designs, and enforcement issues. The report is organized such that the sections covering current programs and test procedures are subdivided by target appliance. These sections are further divided by country, where applicable. Each section is concluded with recommendations.

McNeil, Michael A.

2003-09-01T23:59:59.000Z

109

Impacts of China's Current Appliance Standards and Labeling Program to 2020  

E-Print Network [OSTI]

standard for televisions is called “The minimum allowable values of energy efficiency and energy conservation

Fridley, David; Aden, Nathaniel; Zhou, Nan; Lin, Jiang

2007-01-01T23:59:59.000Z

110

Energy Efficient, Summer-Friendly Appliances | Department of...  

Energy Savers [EERE]

less energy than standard models, so they cost less to power over their lifetimes. And that's not a paltry difference in costs-If you replaced a central air conditioner that's more...

111

PSNC Energy (Gas)- Energy-Efficient Appliance Rebate Program  

Broader source: Energy.gov [DOE]

PSNC offers rebates to customers who purchase energy-efficient natural gas water heaters or natural gas furnaces. The rebate is available only when existing natural gas-fired water heating or...

112

International Comparison of Energy Efficiency Awards for Appliance Manufacturers and Retailers  

E-Print Network [OSTI]

Association of Home Appliance Manufacturers (AHAM),2012, “AHAM Programs. ” http://www.aham.org/industry/ht/d/on market surveillance AHAM – Association of Home Appliance

Zhou, Nan

2014-01-01T23:59:59.000Z

113

Max Tech and Beyond: Maximizing Appliance and Equipment Efficiency by Design  

E-Print Network [OSTI]

efficiency standards were released for small electric motors (electric motors (1 – 200 HP)[4]. As of January 1, 2010, standards mandate NEMA Premium efficiency

Desroches, Louis-Benoit

2012-01-01T23:59:59.000Z

114

State Energy Efficient Appliance Rebate Program is Closed | Department of  

Broader source: Energy.gov (indexed) [DOE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment of Energy U.S.Improve Emitter EfficiencyDepartmentbetweenEnergy Andrea

115

2014-07-21 Issuance: Appliance Standards and Rulemaking Federal Adivsory Committee (ASRAC)- Manufactured Housing Working Group; Notice of Open Meeting  

Broader source: Energy.gov [DOE]

This document is a pre-publication Federal Register notice of public meeting for the Appliance Standards and Rulemaking Federal Advisory Committee (ASRAC) - Manufactured Housing Working Group, as issued by the Deputy Assistant Secretary for Energy Efficiency on July 21, 2014. Though it is not intended or expected, should any discrepancy occur between the document posted here and the document published in the Federal Register, the Federal Register ?publication controls. This document is being made available through the Internet solely as a means to facilitate the public's access to this document.

116

EIA Energy Efficiency-Appliance Standards and Labeling Links  

U.S. Energy Information Administration (EIA) Indexed Site

or the products and services they offer. Government Agencies U.S. Department of Energy Energy Conservation Program for Consumer Products, test procedures and certification...

117

Presenting a New (and Cool) Appliance Efficiency Standard | Department of  

Broader source: Energy.gov (indexed) [DOE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarly Careerlumens_placard-green.epsEnergy1.pdfMarket |21,-Committee Meeting | Department ofEnergy

118

Energy Department Issues New Appliance Efficiency Standards | Department of  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:Year in Review: TopEnergyIDIQBusiness CompetitionDepartment of Energy 7Department

119

Appliance/Equipment Efficiency Standards | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of InspectorConcentrating SolarElectricEnergyCT Biomass Facility JumpvolcanicPhase 1 Jump to:Virginia(West|

120

Impacts of China's Current Appliance Standards and LabelingProgram to 2020  

SciTech Connect (OSTI)

The report summarizes the history and nature of China sstandardsand labeling program in the Introduction in Section 1. Trends indomestic production, exports, penetration rates, unit energy consumptionand the history of S&L technical levels by product are discussed ingreat detail in Section 2. The national energy impactsanalysis found inSection 3 concludes that overall China s standards and labeling programsreduce total electricity consumption in 2020 by an annual 106 TWh, or 16percent of what would otherwise been expected in that year in the absenceof standards and labeling programs.In total, the report concludes thatthe S&L programs currently in place in China are expected to save acumulative 1143 TWh by 2020, or 9 percent of the cumulative consumptionof residential electricity to that year. In 2020 alone, annual savingsare expected to be equivalent to 11 percent of residential electricityuse. In average generation terms, this is equivalent to 27 1-GW coalfired plants that would have required around 75 million tonnes of coal tooperate.In comparison, savings from the US appliance standards programalone is expected to save 10 percent of residential electricityconsumption in 2020.

Fridley, David; Aden, Nathaniel; Zhou, Nan; Lin, Jiang

2007-03-03T23:59:59.000Z

Note: This page contains sample records for the topic "appliance efficiency standards" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Energy Efficiency Resource Standard  

Broader source: Energy.gov [DOE]

The California Legislature emphasized the importance of energy efficiency and established broad goals with the enactment of [http://docs.cpuc.ca.gov/word_pdf/FINAL_DECISION/85995.pdf Assembly Bill...

122

Energy Star Appliances 1 Texas A&M AgriLife Extension Service ENERGY STAR Appliances  

E-Print Network [OSTI]

Energy Star® Appliances 1 Texas A&M AgriLife Extension Service ENERGY STAR® Appliances ENERGY STAR®-labeled appliances save you money by using less electricity and water than other appliances. Better appliance energy efficiency comes from quality materials and technologically advanced materials. Although energy efficient

123

Japan's Residential Energy Demand Outlook to 2030 Considering Energy Efficiency Standards"Top-Runner Approach"  

SciTech Connect (OSTI)

As one of the measures to achieve the reduction in greenhouse gas emissions agreed to in the"Kyoto Protocol," an institutional scheme for determining energy efficiency standards for energy-consuming appliances, called the"Top-Runner Approach," was developed by the Japanese government. Its goal is to strengthen the legal underpinnings of various energy conservation measures. Particularly in Japan's residential sector, where energy demand has grown vigorously so far, this efficiency standard is expected to play a key role in mitigating both energy demand growth and the associated CO2 emissions. This paper presents an outlook of Japan's residential energy demand, developed by a stochastic econometric model for the purpose of analyzing the impacts of the Japan's energy efficiency standards, as well as the future stochastic behavior of income growth, demography, energy prices, and climate on the future energy demand growth to 2030. In this analysis, we attempt to explicitly take into consideration more than 30 kinds of electricity uses, heating, cooling and hot water appliances in order to comprehensively capture the progress of energy efficiency in residential energy end-use equipment. Since electricity demand, is projected to exhibit astonishing growth in Japan's residential sector due to universal increasing ownership of electric and other appliances, it is important to implement an elaborate efficiency standards policy for these appliances.

Lacommare, Kristina S H; Komiyama, Ryoichi; Marnay, Chris

2008-05-15T23:59:59.000Z

124

Trends in the cost of efficiency for appliances and consumer electronics  

E-Print Network [OSTI]

Appliance Refrigerators and Freezers Room Air ConditionersPCU3352283352285 a The refrigerator and freezer price trendRefrigerators, Refrigerator-Freezers, and Freezers (Final

Desroches, Louis-Benoit

2013-01-01T23:59:59.000Z

125

Mitigating Carbon Emissions: the Potential of Improving Efficiency of Household Appliances in China  

E-Print Network [OSTI]

efficiency standards. Total energy consumption (TEC) is thusarrived as follows, Total Energy Consumption = ? Stock(i) *Retirement) And total energy consumption for a particular

Lin, Jiang

2006-01-01T23:59:59.000Z

126

Max Tech and Beyond: Maximizing Appliance and Equipment Efficiency by Design  

E-Print Network [OSTI]

energy efficiency standards, the goal of this project was to identify and rank by national energy-savings potential the best practices

Desroches, Louis-Benoit

2012-01-01T23:59:59.000Z

127

Arnold Schwarzenegger 2009 APPLIANCE  

E-Print Network [OSTI]

............................................................................................... 68 1603 Testing: All Appliances

128

ENERGY EFFICIENCY STANDARDS FOR RESIDENTIALAND  

E-Print Network [OSTI]

ENERGY EFFICIENCY STANDARDS FOR RESIDENTIALAND NONRESIDENTIAL BUILDINGS 1 JULY 1995 CALIFORNIA ENERGY =I COMMISSION Pete Wilson, Governor ~400-95-001 For historical reference Current Title 24 Standards are available at: http://www.energy.ca.gov/title24/ #12;CALIFORNIA ENERGY COMMISSION Valerie Hall

129

Development of energy-efficiency standards for Indian refrigerators  

SciTech Connect (OSTI)

The application of advanced techniques in engineering simulation and economic analysis for the development of efficiency standards for Indian refrigerators is illustrated in this paper. A key feature of this methodology is refrigerator simulation to generate energy savings for a set of energy-efficient design options and life-cycle cost (LCC) analysis with these design options. The LCC of a refrigerator is analyzed as a function of five variables: nominal discount rate, fuel price, appliance lifetime, incremental price, and incremental energy savings. The frequency of occurrence of the LCC minimum at any design option indicates the optimum efficiency level or range. Studies carried out in the US and European Economic Community show that the location of the LCC minimum under different scenarios (e.g., variable fuel price, life-time, discount rate, and incremental price) is quite stable. Thus, an efficiency standard can be developed based on the efficiency value at the LCC minimum. This paper examines and uses this methodology in developing efficiency standards for Indian refrigerators. The potential efficiency standard value is indicated to be 0.65 kWh/day for a 165-liter, CFC-based, manual defrost, single-door refrigerator-freezer.

Bhatia, P.

1999-07-01T23:59:59.000Z

130

Mitigating Carbon Emissions: the Potential of Improving Efficiency of Household Appliances in China  

E-Print Network [OSTI]

in the next 20-30 years as China builds large quantity ofof power generation in China from 0.230 in 2003 to 0.164 kgHousehold Appliances in China Jiang Lin Environmental Energy

Lin, Jiang

2006-01-01T23:59:59.000Z

131

Research and development of energy-efficient appliance motor-compressors. Final report. Volume II: market evaluation  

SciTech Connect (OSTI)

An exploratory experiment asked consumers to verbalize how they chose among a set of hypothetical refrigerators with different initial prices and operating costs. From these verbalizations it was determined that many consumers used a payback criterion whereby they would choose the energy efficient appliance if the increase in initial price was recouped in future operating cost savings within an acceptable period of time. This acceptable period of time is called a payback period. Based on these preliminary results, a field study of 337 respndents was undertaken to estimate the distribution of acceptable payback periods for two energy consuming appliances, air conditioners and refrigerator-freezers. The payback distributions were then used to estimte the percent of consumers (i.e., market shares) who would select the energy efficient appliances for a range of price increases and operating cost savings. Following the field study, 123 consumers participated in a simulated shopping experiment to (a) see if the results of the field survey would hold in a more realistic shopping environment and (b) determine the effects of several market variables on the demand for energy efficiency.

Staelin, R.; Redinger, R.P.

1980-12-01T23:59:59.000Z

132

Energy Conservation Standards Rulemaking Peer Review Report ...  

Broader source: Energy.gov (indexed) [DOE]

& Publications Report to Congress on Appliance Energy Efficiency Rulemakings Energy Conservation Standards Rulemaking Peer Review Report 2014-05-14 Issuance: Energy Conservation...

133

Streamlining ENERGY STAR Appliance Testing  

Broader source: Energy.gov [DOE]

To save taxpayer dollars and help lower the costs of innovative energy-efficient technologies, the Energy Department is streamlining ENERGY STAR testing for appliances.

134

Energy efficiency standards for residential and commercial equipment: Additional opportunities  

SciTech Connect (OSTI)

Energy efficiency standards set minimum levels of energy efficiency that must be met by new products. Depending on the dynamics of the market and the level of the standard, the effect on the market for a given product may be small, moderate, or large. Energy efficiency standards address a number of market failures that exist in the buildings sector. Decisions about efficiency levels often are made by people who will not be responsible for the energy bill, such as landlords or developers of commercial buildings. Many buildings are occupied for their entire lives by very temporary owners or renters, each unwilling to make long-term investments that would mostly reward subsequent users. And sometimes what looks like apathy about efficiency merely reflects inadequate information or time invested to evaluate it. In addition to these sector-specific market failures, energy efficiency standards address the endemic failure of energy prices to incorporate externalities. In the U.S., energy efficiency standards for consumer products were first implemented in California in 1977. National standards became effective starting in 1988. By the end of 2001, national standards were in effect for over a dozen residential appliances, as well as for a number of commercial sector products. Updated standards will take effect in the next few years for several products. Outside the U.S., over 30 countries have adopted minimum energy performance standards. Technologies and markets are dynamic, and additional opportunities to improve energy efficiency exist. There are two main avenues for extending energy efficiency standards. One is upgrading standards that already exist for specific products. The other is adopting standards for products that are not covered by existing standards. In the absence of new and upgraded energy efficiency standards, it is likely that many new products will enter the stock with lower levels of energy efficiency than would otherwise be the case. Once in the stock, it is either impossible or more costly to improve the energy efficiency. Therefore, by not expanding or upgrading energy efficiency standards, opportunities for saving energy would be lost. In the past two decades, standards have significantly raised the level of energy efficiency for new products. How much more might be gained by making standards more stringent on products already subject to them, or by extending standards to products not yet covered? The main goal of this study is to estimate key national impacts of new and upgraded energy efficiency standards for residential and commercial equipment. These impacts approximate the opportunity for national benefits that may be lost if standards are not upgraded and expanded from current levels. This study also identifies the end uses where the largest opportunities exist. This analysis was prepared for the National Commission on Energy Policy (NCEP). It uses an analytical approach that is similar in concept to that used by the U.S. Department of Energy (DOE) to set standard levels. It relies on much less data and uses more simplified assumptions than the detailed and complex formulations used in DOE's standard-setting process. The results of this analysis should thus be viewed as a first approximation of the impacts that would actually be achieved by new standards. All monetary values in this report are in 2002 dollars.

Rosenquist, Greg; McNeil, Michael; Iyer, Maithili; Meyers, Steve; McMahon, Jim

2004-08-02T23:59:59.000Z

135

Energy and CO2 efficient scheduling of smart appliances in active houses equipped with batteries  

E-Print Network [OSTI]

is commonly defined as changes in electricity use by consumers in response to changes in the electricity price in household load profile, e.g., see [6]. The main conclusions are that employing hourly electricity prices hard for consumers to reschedule their appliances based on time-varying electricity prices and CO2

Johansson, Karl Henrik

136

Data Availability in Appliance Standards and Labeling Program Development and Evaluation  

E-Print Network [OSTI]

measures), but the market for energy efficiency was affectedunderstand remaining market potential for energy efficiency.fitting of market adoption of energy-efficient products to

Romankiewicz, John

2014-01-01T23:59:59.000Z

137

PROPOSED 2013 BUILDING ENERGY EFFICIENCY STANDARDS  

E-Print Network [OSTI]

PROPOSED 2013 BUILDING ENERGY EFFICIENCY STANDARDS Title 24, Part 6, and Associated400201200415 DAY #12;2013 Building Energy Efficiency Standards Page 1 NOTICE NOTICE This version of the 2013 Building Energy Efficiency Standards is a marked version; that is, it contains underlined or struck

138

Setting the Standard for Industrial Energy Efficiency  

E-Print Network [OSTI]

Voluntary Agreements for Energy Efficiency or GHG EmissionsACEEE Summer Study on Energy Efficiency in Industry, WestStandard for Industrial Energy Efficiency A. McKane 1 , R.

McKane, Aimee; Williams, Robert; Perry, Wayne; Li, Tienan

2008-01-01T23:59:59.000Z

139

An Analysis of the Price Elasticity of Demand for Household Appliances  

SciTech Connect (OSTI)

This report summarizes our study of the price elasticity of demand for home appliances, including refrigerators, clothes washers, and dishwashers. In the context of increasingly stringent appliance standards, we are interested in what kind of impact the increased manufacturing costs caused by higher efficiency requirements will have on appliance sales. We begin with a review of existing economics literature describing the impact of economic variables on the sale of durable goods.We then describe the market for home appliances and changes in this market over the past 20 years, performing regression analysis on the shipments of home appliances and relevant economic variables including changes to operating cost and household income. Based on our analysis, we conclude that the demand for home appliances is price inelastic.

Fujita, Kimberly; Dale, Larry; Fujita, K. Sydny

2008-01-25T23:59:59.000Z

140

Midea Washing Appliance: Order (2011-CE-1903)  

Broader source: Energy.gov [DOE]

DOE ordered Midea Washing Appliance Mfg. Co., Ltd. to pay a $6,000 civil penalty after finding Midea Washing Appliance had failed to certify that certain models of dishwashers comply with the applicable energy conservation standards.

Note: This page contains sample records for the topic "appliance efficiency standards" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

MC Appliance: Order (2014-CE-20002)  

Broader source: Energy.gov [DOE]

DOE ordered MC Appliance Corporation to pay a $16,000 civil penalty after finding MC Appliance had failed to certify that certain models of residential clothes washers and residential clothes dryers comply with the applicable energy conservation standards.

142

Creating and Implementing a Regularized Monitoring and EnforcementSystem for China's Mandatory Standards and Energy Information Label forAppliances  

SciTech Connect (OSTI)

China has developed a comprehensive program of energy efficiency standards and labels for household appliances. In 1989, China first launched its minimum energy performance standards (MEPS), which are now applied to an extensive list of products. In 1998, China launched a voluntary energy endorsement label, which has grown to cover both energy-saving and water-saving products. And, in 2005, China launched a mandatory energy information label that initially covered two products. CLASP has assisted China in developing 11 minimum energy performance standards (MEPS) for 9 products and endorsement labels for 11 products including: refrigerators; air conditioners; televisions; printers; computers; monitors; fax machines; copiers; DVD/VCD players; external power supplies; and set-top boxes. CLASP has also assisted China in the development of the mandatory energy information label. Increasingly, attention is being placed on maximum energy savings from China's standards and labeling (S&L) efforts in order to meet the recently announced goal of reducing China's energy intensity by 20 percent by 2010 with an interim objective of 4 percent in 2006. China's mandatory standards system is heavily focused on the technical requirements for efficiency performance, but historically, it has lacked administrative and personnel capacity to undertake monitoring and enforcement of these legally binding standards. Similarly, resources for monitoring and enforcement have been quite limited. As a consequence, compliance to both the mandatory standards and the mandatory energy information label is uneven with the potential and likely result of lost energy savings. Thus, a major area for improvement, which could significantly increase overall energy savings, is the creation and implementation of a regularized monitoring system for tracking the compliance to, and enforcement of, mandatory standards and the energy information label in China. CLASP has been working with the China National Institute of Standardization (CNIS), the China Administration for Quality, Supervision, Inspection and Quarantine (AQSIQ) and relevant stakeholders in the industry to develop a stronger system of monitoring and enforcement. In November 2005, CNIS and LBNL (a CLASP implementing partner) with funding from the Energy Foundation jointly organized an international workshop to present the international best practices in S&L monitoring and enforcement. Currently, CNIS is developing a guideline for monitoring and enforcement for appliance standards. With support from METI, CLASP has been able to expand the on-going collaboration with CNIS to include enforcement needs for the mandatory energy information label and to accelerate the progress of the project to develop a more robust monitoring and enforcement for S&L programs in China. This expanded effort has included: (1) Holding an enforcement and monitoring roadmap planning workshop with key S&L stakeholders; (2) Interviews with S&L stakeholders on the need and scope of national compliance tests; (3) Research on past enforcement activities; (4) An analysis of compliance data from the mandatory energy information labeling program; (5) Interviews with stakeholders on the need and scope of testing infrastructure; and (6) Development of a roadmap for future activities. This report summarizes the findings of these activities and identifies the progress that China is making, and can make, toward developing a stronger system of monitoring and enforcement (M&E). In sum, it outlines a vision of moving forward with more vigorous M&E in China.

Lin, Jiang

2007-03-01T23:59:59.000Z

143

Global Potential of Energy Efficiency Standards and Labeling Programs  

SciTech Connect (OSTI)

This report estimates the global potential reductions in greenhouse gas emissions by 2030 for energy efficiency improvements associated with equipment (appliances, lighting, and HVAC) in buildings by means of energy efficiency standards and labels (EES&L). A consensus has emerged among the world's scientists and many corporate and political leaders regarding the need to address the threat of climate change through emissions mitigation and adaptation. A further consensus has emerged that a central component of these strategies must be focused around energy, which is the primary generator of greenhouse gas emissions. Two important questions result from this consensus: 'what kinds of policies encourage the appropriate transformation to energy efficiency' and 'how much impact can these policies have'? This report aims to contribute to the dialogue surrounding these issues by considering the potential impacts of a single policy type, applied on a global scale. The policy addressed in this report is Energy Efficient Standards and Labeling (EES&L) for energy-consuming equipment, which has now been implemented in over 60 countries. Mandatory energy performance standards are important because they contribute positively to a nation's economy and provide relative certainty about the outcome (both timing and magnitudes). Labels also contribute positively to a nation's economy and importantly increase the awareness of the energy-consuming public. Other policies not analyzed here (utility incentives, tax credits) are complimentary to standards and labels and also contribute in significant ways to reducing greenhouse gas emissions. We believe the analysis reported here to be the first systematic attempt to evaluate the potential of savings from EES&L for all countries and for such a large set of products. The goal of the analysis is to provide an assessment that is sufficiently well-quantified and accurate to allow comparison and integration with other strategies under consideration.

McNeil, Michael A; McNeil, Michael A.; Letschert, Virginie; de la Rue du Can, Stephane

2008-06-15T23:59:59.000Z

144

New Energy Efficiency Standards for Commercial Refrigeration...  

Office of Environmental Management (EM)

for Commercial Refrigeration Equipment to Cut Businesses' Energy Bills and Carbon Pollution New Energy Efficiency Standards for Commercial Refrigeration Equipment to Cut...

145

Standard Energy Efficiency Data (SEED) Platform Homepage Screenshot...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Standard Energy Efficiency Data (SEED) Platform Homepage Screenshot Standard Energy Efficiency Data (SEED) Platform Homepage Screenshot Standard Energy Efficiency Data (SEED)...

146

Impacts of China's Current Appliance Standards and Labeling Program to 2020  

E-Print Network [OSTI]

Standards Domestic refrigerators/freezers* Room airLabeling Domestic refrigerators/freezers* Room air3-star compartment Refrigerator/Freezer Chest frozen food

Fridley, David; Aden, Nathaniel; Zhou, Nan; Lin, Jiang

2007-01-01T23:59:59.000Z

147

International Review of Frameworks for Impact Evaluation of Appliance Standards, Labeling, and Incentives  

E-Print Network [OSTI]

and Energy Efficiency. Energy Market Innovations, 2011, “quantify associated energy savings and market transformationimpacts (e.g. , energy savings and market impacts) and are

Zhou, Nan

2014-01-01T23:59:59.000Z

148

2014-08-07 Issuance: Appliance Standards and Rulemaking Federal Advisory Committee (ASRAC)- Manufactured Housing Working Group; Notice of Open Meeting  

Broader source: Energy.gov [DOE]

This document is a pre-publication Federal Register notice of open meeting regarding the Appliance Standards and Rulemaking Federal Advisory Committee (ASRAC) - Manufactured Housing Working Group on August 7, 2014. Though it is not intended or expected, should any discrepancy occur between the document posted here and the document published in the Federal Register, the Federal Register publication controls. This document is being made available through the Internet solely as a means to facilitate the public's access to this document.

149

A Global Review of Incentive Programs to Accelerate Energy-Efficient Appliances and Equipment  

E-Print Network [OSTI]

of Energy Efficiency Programs: Best Practices, TechnicalBest Practices in Designing and Implementing Energy EfficiencyEnergy Efficiency Improvements: A Review of Current Programs Challenges, Opportunities, and Best Practices. ”

de la Rue du Can, Stephane

2014-01-01T23:59:59.000Z

150

Max Tech and Beyond: Maximizing Appliance and Equipment Efficiency by Design  

E-Print Network [OSTI]

Primary Energy Use (quads) Product Ultra-Efficient Designefficient design options found to have significant energy-efficient design options include power supplies that involve fewer energy

Desroches, Louis-Benoit

2012-01-01T23:59:59.000Z

151

A Global Review of Incentive Programs to Accelerate Energy-Efficient Appliances and Equipment  

E-Print Network [OSTI]

case in the UK, where the energy market is liberalized andScoping Study on Energy-Efficiency Market Transformation bymarket barriers to energy efficiency, market concentration,

de la Rue du Can, Stephane

2014-01-01T23:59:59.000Z

152

Compliance, Certification and Enforcement for US Appliance and Equipment Energy Efficiency Programs by US DOE  

Office of Energy Efficiency and Renewable Energy (EERE)

Information about energy and water conservation standards, ENERGY STAR, and compliance and certification enforcement.

153

Cost-efficiency analysis in support of the energy conservation standards for refrigerator/freezers  

SciTech Connect (OSTI)

The National Appliance Energy Conservation At (NAECA) of 1987 requires the Department of Energy (DOE) to consider new or amended energy-efficiency standards for refrigerators and freezers along with several other appliances. This paper describes the cost-efficiency analysis of design options carried out in support of the proposed 1998 standards for refrigerator/freezers. These proposed standards are unique in that they have been reached by a consensus of various interested parties including the trade association of refrigerator and freezer manufacturers, environmental groups, state energy offices, and utility companies. In large part, these consensus standards are based on the analysis described in this paper. The analysis shows that, for example, for a 515-liter (18.2-ft{sup 3}) top-mount automatic-defrost refrigerator-freezer, the annual energy consumption can be reduced from 700 kWh/yr (2.52 GJ/yr) to 484 kWh/yr (1.74 GJ/yr) (30.9%) by the use of more efficient fan motors and compressors, improved gaskets, and insulation that is {1/2}-inch (12.7 mm) thicker. The energy use can be further reduced to 422 kWh/yr (1.52 GJ/yr) (39.8%) by employing improved heat exchangers, switching to adaptive defrost, and employing vacuum panel insulation instead of thicker walls and doors.

Hakim, S.H.; Turiel, I. [Lawrence Berkeley National Lab., CA (United States). Energy and Environment Div.

1996-12-31T23:59:59.000Z

154

Analysis of Minimum Efficiency Standards and Rebate Incentive Programs for Domestic Refrigerators in the Pacific Northwest.  

SciTech Connect (OSTI)

Refrigerator-freezers (R/Fs) and freezers (FRs) account for 16% of the electricity consumed in the residential sector of the Bonneville Power Administration (BPA) forecast region (Oregon, Washington, Idaho and Western Montana). After space and water heating, R/Fs are the largest residential electrical end-use. There is great potential for reducing electricity consumption in a cost-effective manner through the purchase and use of more energy-efficient R/Fs and FRs. For example, if every household in the BPA region had the best R/F model now mass-produced, the electricity savings would be about 5 billion kWh/yr, approximately the power supplied annually by 1000 MW of nuclear or coal-fired generating capacity. The Northwest Power Planning Council (NPPC) and BPA recognize the savings potential from efficient R/Fs and FRs as well as the barriers to their use. In the 1983 regional power plan, the Council directed BPA to develop and implement incentive and promotion programs for efficient appliances. The NPPC also called for the evaluation of minimum efficiency standards for appliances sold in the region. In response to this directive, the Office of Conservation in BPA funded an evaluation of both rebate incentive programs and minimum efficiency standards for R/Fs and FRs. The results are presented in this report.

Geller, Howard S.

1985-11-01T23:59:59.000Z

155

An International Survey of Electric Storage Tank Water Heater Efficiency and Standards  

SciTech Connect (OSTI)

Water heating is a main consumer of energy in households, especially in temperate and cold climates. In South Africa, where hot water is typically provided by electric resistance storage tank water heaters (geysers), water heating energy consumption exceeds cooking, refrigeration, and lighting to be the most consumptive single electric appliance in the home. A recent analysis for the Department of Trade and Industry (DTI) performed by the authors estimated that standing losses from electric geysers contributed over 1,000 kWh to the annual electricity bill for South African households that used them. In order to reduce this burden, the South African government is currently pursuing a programme of Energy Efficiency Standards and Labelling (EES&L) for electric appliances, including geysers. In addition, Eskom has a history of promoting heat pump water heaters (HPWH) through incentive programs, which can further reduce energy consumption. This paper provides a survey of international electric storage water heater test procedures and efficiency metrics which can serve as a reference for comparison with proposed geyser standards and ratings in South Africa. Additionally it provides a sample of efficiency technologies employed to improve the efficiency of electric storage water heaters, and outlines programs to promote adoption of improved efficiency. Finally, it surveys current programs used to promote HPWH and considers the potential for this technology to address peak demand more effectively than reduction of standby losses alone

Johnson, Alissa; Lutz, James; McNeil, Michael A.; Covary, Theo

2013-11-13T23:59:59.000Z

156

Global Potential of Energy Efficiency Standards and Labeling Programs  

E-Print Network [OSTI]

Market Study for Improving ENergy Efficiency for Fans. ISI.of U.S. Federal Energy Efficiency Standards for Residentialet al. (2006). "Energy efficiency standards for equipment:

McNeil, Michael A

2008-01-01T23:59:59.000Z

157

Energy Efficiency Standards for State Buildings  

Broader source: Energy.gov [DOE]

In April 2009, the legislature passed [http://data.opi.mt.gov/bills/2009/billhtml/SB0049.htm S.B. 49], creating energy efficiency standards for state-owned and state-leased buildings. Energy...

158

Renewable Energy and Energy Efficiency Portfolio Standard  

Broader source: Energy.gov [DOE]

North Carolina's Renewable Energy and Energy Efficiency Portfolio Standard (REPS), established by [http://www.ncleg.net/Sessions/2007/Bills/Senate/PDF/S3v6.pdf Senate Bill 3] in August 2007,...

159

Max Tech and Beyond: Maximizing Appliance and Equipment Efficiency by Design  

E-Print Network [OSTI]

United States Industrial Electric Motor Systems MarketStandards, Electric Motors, http://www1.eere.energy.gov/5] DOE. (2010). Small Electric Motors Final Rule Technical

Desroches, Louis-Benoit

2012-01-01T23:59:59.000Z

160

Distinctive Appliances: Proposed Penalty (2014-CE-23020)  

Broader source: Energy.gov [DOE]

DOE alleged in a Notice of Proposed Civil Penalty that Distinctive Appliances Distributing Inc. failed to certify cooking products as compliant with the applicable energy conservation standards.

Note: This page contains sample records for the topic "appliance efficiency standards" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Max Tech and Beyond: Maximizing Appliance and Equipment Efficiency by Design  

E-Print Network [OSTI]

could save roughly 50% of the energy consumed per port (ports consume much of network equipment energy), or 12% ofthrough the port. The recent development of energy efficient

Desroches, Louis-Benoit

2012-01-01T23:59:59.000Z

162

Mitigating Carbon Emissions: the Potential of Improving Efficiency of Household Appliances in China  

E-Print Network [OSTI]

Water Heaters .air-conditioners, and water heaters are growing rapidly duedue to more efficient water heater technologies are large as

Lin, Jiang

2006-01-01T23:59:59.000Z

163

Catalog of DC Appliances and Power Systems  

E-Print Network [OSTI]

Appliance Efficient DC compatible replacement technology variable-speed compressor and fans run by brushless DC motor in place of single-speed compressors

Garbesi, Karina

2012-01-01T23:59:59.000Z

164

Energy Efficient Buildings and Appliances: From Berkeley Lab to the Marketplace (LBNL Summer Lecture Series)  

ScienceCinema (OSTI)

Summer Lecture Series 2006: Art Rosenfeld, an appointee to the California Energy Commission and one of the architects of energy efficiency research at Berkeley Lab in the 1970s, discusses what it takes to shepherd innovative energy efficiency research from the lab to the real world.

Rosenfeld, Art [Commissioner, California Energy Commission

2011-04-28T23:59:59.000Z

165

STANDARDS VERSUS NEGOTIATED AGREEMENTS 1 EFFICIENCY STANDARDS VERSUS NEGOTIATED  

E-Print Network [OSTI]

growth in electricity consumption, especially in the residential and tertiary sectors, is one IN THE ELECTRICAL APPLIANCE SECTOR Philippe MENANTEAU, Laboratoire d'Economie de la Production et de l'Intégration Internationale Département Energie et Politiques de l'Environnement (LEPII-EPE) Centre National de la Recherche

Boyer, Edmond

166

Appliance and Equipment Standards  

Broader source: Energy.gov (indexed) [DOE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarly Career Scientists' ResearchThe OfficeUtility Fed.9-0s)Excel workbook (version 5.2)October

167

Evaluation of advanced technologies for residential appliances and residential and commercial lighting  

SciTech Connect (OSTI)

Section 127 of the Energy Policy Act requires that the Department of Energy (DOE) prepare a report to Congress on the potential for the development and commercialization of appliances that substantially exceed the present federal or state efficiency standards. Candidate high-efficiency appliances must meet several criteria including: the potential exists for substantial improvement (beyond the minimum established in law) of the appliance`s energy efficiency; electric, water, or gas utilities are prepared to support and promote the commercialization of such appliances; manufacturers are unlikely to undertake development and commercialization of such appliances on their own, or development and production would be substantially accelerated by support to manufacturers. This report describes options to improve the efficiency of residential appliances, including water heaters, clothes washers and dryers, refrigerator/freezers, dishwashers, space heating and cooling devices, as well as residential and commercial lighting products. Data from this report (particularly Appendix 1)were used to prepare the report to Congress mentioned previously. For the residential sector, national energy savings are calculated using the LBL Residential Energy Model. This model projects the number of households and appliance saturations over time. First, end-use consumption is calculated for a base case where models that only meet the standard replace existing models as these reach the end of their lifetime. Second, models with efficiencies equal to the technology under consideration replace existing models that reach the end of their lifetime. For the commercial sector, the COMMEND model was utilized to project national energy savings from new technologies. In this report, energy savings are shown for the period 1988 to 2015.

Turiel, I.; Atkinson, B.; Boghosian, S.; Chan, P.; Jennings, J.; Lutz, J.; McMahon, J.; Rosenquist, G.

1995-01-01T23:59:59.000Z

168

A Bright Idea: New Efficiency Standards for Incandescent and...  

Broader source: Energy.gov (indexed) [DOE]

A Bright Idea: New Efficiency Standards for Incandescent and Fluorescent Lights A Bright Idea: New Efficiency Standards for Incandescent and Fluorescent Lights July 21, 2009 -...

169

Analysis of Minimum Efficiency Standards and Rebate Incentive Programs for Domestic Refrigerators in the Pacific Northwest, Executive Summary.  

SciTech Connect (OSTI)

Refrigerator-freezers (R/Fs) and freezers (FRs) account for 16% of the electricity consumed in the residential sector of the Bonneville Power Administration (BPA) forecast region (Oregon, Washington, Idaho and Western Montana). After space and water heating, R/Fs are the largest residential electrical end-use. The Northwest Power Planning Council (NPPC) and BPA recognize the savings potential from efficient R/Fs and FRs as well as the barriers to their use. In the 1983 regional power plan, the Council directed BPA to develop and implement incentive and promotion programs for efficient appliances. The NPPC also called for the evaluation of minimum efficiency standards for appliances sold in the region. In response to this directive, the Office of Conservation in BPA funded an evaluation of both rebate incentive programs and minimum efficiency standards for R/Fs and FRs. The results are presented in this report. The energy savings potential and economic feasibility of rebate programs and efficiency standards are the primary issues considered.

Geller, Howard S.

1986-01-01T23:59:59.000Z

170

Research and development of energy-efficient appliance motor-compressors. Volume IV. Production demonstration and field test  

SciTech Connect (OSTI)

Two models of a high-efficiency compressor were manufactured in a pilot production run. These compressors were for low back-pressure applications. While based on a production compressor, there were many changes that required production process changes. Some changes were performed within our company and others were made by outside vendors. The compressors were used in top mount refrigerator-freezers and sold in normal distribution channels. Forty units were placed in residences for a one-year field test. Additional compressors were built so that a life test program could be performed. The results of the field test reveal a 27.0% improvement in energy consumption for the 18 ft/sup 3/ high-efficiency model and a 15.6% improvement in the 21 ft/sup 3/ improvement in the 21 ft/sup 3/ high-efficiency model as compared to the standard production unit.

Middleton, M.G.; Sauber, R.S.

1983-09-01T23:59:59.000Z

171

Status of China's Energy Efficiency Standards and Labels for Appliances and International Collaboration  

E-Print Network [OSTI]

is applied to four products including: air conditioners;to cover four products including: air conditioners; house-size - for three products (refrigerators, air-conditioners

Zhou, Nan

2010-01-01T23:59:59.000Z

172

Energy-efficiency labels and standards: A guidebook for appliances, equipment and lighting  

E-Print Network [OSTI]

Danish Electricity Savings Trust European Commission Directorate General for Transport and Energy Defense Logistics Agency

McMahon, James E.; Wiel, Stephen

2001-01-01T23:59:59.000Z

173

E-Print Network 3.0 - appliance efficiency standards Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

degli studi di Milano Collection: Computer Technologies and Information Sciences 90 Smart Meter Privacy: A Theoretical Framework Lalitha Sankar, Member, IEEE, S. Raj...

174

Efficiency of appliance models on the market before and after DOE standards  

E-Print Network [OSTI]

Refrigerators Models in AHAM Directory Compared to DOE8-14 kBtu/hour Models in AHAM Directory Compared to1990 DOE8-14 kBtu/hour Models in AHAM Directory Compared to 2000 DOE

Meyers, Stephen

2004-01-01T23:59:59.000Z

175

Realized and projected impacts of U.S. federal efficiency standards for residential appliances  

E-Print Network [OSTI]

AND ACRONYMS AAUE AFUE AHAM ARI LBNL NPV TSD Average annualfrom industry sources (AHAM, ARI) for all of the consideredwe reduced forecasts made by AHAM for 2001-02 by 5%. AHAM’s

Meyers, Stephen; McMahon, James; McNeil, Michael; Liu, Xiaomin

2002-01-01T23:59:59.000Z

176

Realized and Projected Impacts of U.S. Energy Efficiency Standards for Residential and Commercial Appliances  

E-Print Network [OSTI]

Refrigerators, Refrigerator-Freezers, and Freezers,and Updates RESIDENTIAL Refrigerators Freezers Central Aira given year for refrigerators, freezers, clothes washers,

Meyers, Stephen P.

2008-01-01T23:59:59.000Z

177

Realized and Projected Impacts of U.S. Energy Efficiency Standards for Residential and Commercial Appliances  

E-Print Network [OSTI]

residential/commercial primary energy consumption and carbonthe savings in primary energy consumption using factors forsite energy to primary energy consumption. The model uses

Meyers, Stephen P.

2008-01-01T23:59:59.000Z

178

Energy-efficiency labels and standards: A guidebook for appliances, equipment and lighting  

E-Print Network [OSTI]

commercial-package air-conditioning and heating equipment, packaged terminal air condi- tioners and heat pumps, warm-air furnaces, packaged boilers, storage water heaters,

McMahon, James E.; Wiel, Stephen

2001-01-01T23:59:59.000Z

179

Realized and Projected Impacts of U.S. Energy Efficiency Standards for Residential and Commercial Appliances  

E-Print Network [OSTI]

and Heat Pumps Room Air Conditioners Water Heaters Gas Furnaces Clothes Washers Clothes Dryers Dishwashers COMMERCIAL

Meyers, Stephen P.

2008-01-01T23:59:59.000Z

180

Realized and Projected Impacts of U.S. Energy Efficiency Standards for Residential and Commercial Appliances  

E-Print Network [OSTI]

input capacity and the home heating load. For water heatersHeaters, Direct Heating Equipment, Mobile Home Furnaces,

Meyers, Stephen P.

2008-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "appliance efficiency standards" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Realized and Projected Impacts of U.S. Energy Efficiency Standards for Residential and Commercial Appliances  

E-Print Network [OSTI]

that ballast wattage would track ballast/lamp type accordingaverage wattage for each ballast type and number of lamps

Meyers, Stephen P.

2008-01-01T23:59:59.000Z

182

Local Enforcement of Appliance Efficiency Standards and Labeling Program in China: Progress and Challenges  

E-Print Network [OSTI]

lamps Electric storage water heaters Small and medium 3-storage electric water heaters, household induction cooktopsSichuan Storage electric water heaters Jiangsu Small and

Zheng, Nina

2014-01-01T23:59:59.000Z

183

Projected Regional Impacts of Appliance Efficiency Standards for the U.S. Residential Sector  

E-Print Network [OSTI]

Air Conditioners, Water Heaters, Direct Heating Equipment,according to the type of water heater used in the home.Gas Room Central HP Water heater Showers Faucets Furnace X X

Koomey, J.G.

2010-01-01T23:59:59.000Z

184

Energy-efficiency labels and standards: A guidebook for appliances, equipment and lighting  

E-Print Network [OSTI]

organizations, and energy suppliers), for identifying theirmanufacturers, energy suppliers, the national economy, andon manufacturers, energy suppliers, and the general economy.

McMahon, James E.; Wiel, Stephen

2001-01-01T23:59:59.000Z

185

Energy-Efficiency Labels and Standards: A Guidebook for Appliances, Equipment, and Lighting - 2nd Edition  

E-Print Network [OSTI]

organizations, and energy suppliers), for identifying theirmanufacturers, energy suppliers, the national economy, andon manufacturers, energy suppliers, and the general economy.

Wiel, Stephen; McMahon, James E.

2005-01-01T23:59:59.000Z

186

Local Enforcement of Appliance Efficiency Standards and Labeling Program in China: Progress and Challenges  

E-Print Network [OSTI]

lamps Electric storage water heaters Small and medium 3-efficacy Electric storage water heaters Inherent energylamps Electric storage water heaters Small and medium 3-

Zheng, Nina

2014-01-01T23:59:59.000Z

187

How to Make Appliance Standards Work: Improving Energy and Water Efficiency Test Procedures  

E-Print Network [OSTI]

Volume III, Storage Water Heaters With Input Ratings AboveVolume III, Storage Water Heaters With Input Ratings AboveVolume III, Storage Water Heaters With Input Ratings Above

Lutz, Jim

2012-01-01T23:59:59.000Z

188

Projected Regional Impacts of Appliance Efficiency Standards for the U.S. Residential Sector  

E-Print Network [OSTI]

Research Institute. August. Hanford, James W . , JonathanFrancis X . , James W . Hanford, Richard E. Brown, Alan H .Sanchez, and James W . Hanford. 1997. Energy Data Sourcebook

Koomey, J.G.

2010-01-01T23:59:59.000Z

189

Realized and prospective impacts of U.S. energy efficiency standards for residential appliances: 2004 update  

E-Print Network [OSTI]

Administration (2004). Annual Energy Outlook 2004. U.S.EIA’s projection in Annual Energy Outlook 2004 shows pricesprojections in EIA’s Annual Energy Outlook 2004. These data

Meyers, Stephen; McMahon, James; McNeil, Michael

2005-01-01T23:59:59.000Z

190

Realized and projected impacts of U.S. federal efficiency standards for residential appliances  

E-Print Network [OSTI]

Administration (2001b). Annual Energy Outlook 2002, U.S.Administration (2001). Annual Energy Outlook 2002, U.S.Energy Review and Annual Energy Outlook. These data yield an

Meyers, Stephen; McMahon, James; McNeil, Michael; Liu, Xiaomin

2002-01-01T23:59:59.000Z

191

Projected Regional Impacts of Appliance Efficiency Standards for the U.S. Residential Sector  

E-Print Network [OSTI]

D O E . 1996a. Annual Energy Outlook 1996, with ProjectionsELA) 1996 Annual Energy Outlook (AEO) (US D O E 1996a).1055.1 Joules. The Annual Energy Outlook (1996) forecast for

Koomey, J.G.

2010-01-01T23:59:59.000Z

192

Realized and Projected Impacts of U.S. Energy Efficiency Standards for Residential and Commercial Appliances  

E-Print Network [OSTI]

Administration (2006). Annual Energy Outlook 2006. U.S.and projections in EIA’s Annual Energy Outlook 2006. 4 Theseforecast by EIA in its Annual Energy Outlook 2006, as EIA’s

Meyers, Stephen P.

2008-01-01T23:59:59.000Z

193

Buildings Energy Data Book: 7.5 Efficiency Standards for Residential Appliances  

Buildings Energy Data Book [EERE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: Alternative Fuels Data CenterEnergyAuthorization for(EV) Road UserNatural U.S.414663161673231231

194

Buildings Energy Data Book: 7.5 Efficiency Standards for Residential Appliances  

Buildings Energy Data Book [EERE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: Alternative Fuels Data CenterEnergyAuthorization for(EV) Road UserNatural U.S.4146631616732312312

195

Buildings Energy Data Book: 7.5 Efficiency Standards for Residential Appliances  

Buildings Energy Data Book [EERE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: Alternative Fuels Data CenterEnergyAuthorization for(EV) Road UserNatural U.S.41466316167323123123

196

Buildings Energy Data Book: 7.5 Efficiency Standards for Residential Appliances  

Buildings Energy Data Book [EERE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: Alternative Fuels Data CenterEnergyAuthorization for(EV) Road UserNatural

197

Energy-efficiency labels and standards: A guidebook for appliances, equipment and lighting  

E-Print Network [OSTI]

W Faucets E Scanners E Rice Cookers E Electric Kettles EThis is the case for rice cookers, for example, which have aincluding stoves, rice cookers, and hot plates) Dishwashers

McMahon, James E.; Wiel, Stephen

2001-01-01T23:59:59.000Z

198

Status of China's Energy Efficiency Standards and Labels for Appliances and International Collaboration  

E-Print Network [OSTI]

irons Automatic rice cookers Televisions Radio receivers andlamp ballasts Automatic rice cookers Hot water bottle Small

Zhou, Nan

2010-01-01T23:59:59.000Z

199

Projected Regional Impacts of Appliance Efficiency Standards for the U.S. Residential Sector  

E-Print Network [OSTI]

Future Energy Use and Carbon Emissions from U.S. Residences.Koomey. 1993. Cutting Carbon Emissions-Burden or Benefit? :roughly equal to 4% of carbon emissions in 1990. Because

Koomey, J.G.

2010-01-01T23:59:59.000Z

200

Energy Efficiency Standards and Labels in North America: Opportunities for Harmonization  

SciTech Connect (OSTI)

To support the North American Energy Working Group's Expert Group on Energy Efficiency (NAEWG-EE), USDOE commissioned the Collaborative Labeling and Appliance Standards Program (CLASP) to prepare a resource document comparing current standards, labels, and test procedure regulations in Canada, Mexico, and the United States. The resulting document reached the following conclusions: Out of 24 energy-using products for which at least one of the three countries has energy efficiency regulations, three products -- refrigerators/freezers, split system central air conditioners, and room air conditioners -- have similar or identical minimum energy performance standards (MEPS) in the three countries. These same three products, as well as three-phase motors, have similar or identical test procedures throughout the region. There are 10 products with different MEPS and test procedures, but which have the short-term potential to develop common test procedures, MEPS, and/or labels. Three other noteworthy areas where possible energy efficiency initiatives have potential for harmonization are standby losses, uniform endorsement labels, and a new standard or label on windows. This paper explains these conclusions and presents the underlying comparative data.

Vanwiemcgrory, Laura; Wiel, Stephen; Van Wie McGrory, Laura; Harrington, Lloyd

2002-05-16T23:59:59.000Z

Note: This page contains sample records for the topic "appliance efficiency standards" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Distributional and Efficiency Impacts of Clean and Renewable Energy Standards  

E-Print Network [OSTI]

supply and demand, including renewable energy resources and generating technologies, while representingDistributional and Efficiency Impacts of Clean and Renewable Energy Standards for Electricity on recycled paper #12;Distributional and Efficiency Impacts of Clean and Renewable Energy Standards

202

Feasibility of an appliance energy testing and labeling program for Sri Lanka  

SciTech Connect (OSTI)

A feasibility study evaluated the costs and benefits of establishing a program for testing, labeling and setting minimum efficiency standards for appliances and lighting in Sri Lanka. The feasibility study included: refrigerators, air-conditioners, flourescent lighting (ballasts & CFls), ceiling fans, motors, and televisions.

Biermayer, Peter; Busch, John; Hakim, Sajid; Turiel, Issac; du Pont, Peter; Stone, Chris

2000-04-01T23:59:59.000Z

203

MC Appliance: Proposed Penalty (2014-CE-20002)  

Broader source: Energy.gov [DOE]

DOE alleged in a Notice of Proposed Civil Penalty that MC Appliance Corporation failed to certify residential clothes washers and residential clothes dryers as compliant with the applicable energy conservation standards.

204

West Virginia Consumers Have Appliance Rebate 'Trifecta'  

Broader source: Energy.gov [DOE]

West Virginians didn’t waste any time in taking advantage of the Energy Efficient Appliance Rebate Program. Only three months in, and almost half of the available $1.7 million is already spoken for.

205

Creating and Implementing a Regularized Monitoring and Enforcement System for China's Mandatory Standards and Energy Information Label for Appliances  

E-Print Network [OSTI]

best practices, China’s monitoring and enforcement effort of mandatory energy efficiencybest practices, however, China’s monitoring and enforcement effort for its mandatory energy efficiencyBest Practice Based on the review of existing laws and regulations related to energy efficiency

Lin, Jiang

2008-01-01T23:59:59.000Z

206

Status of the Local Enforcement of Energy Efficiency Standards and Labeling Program in China  

SciTech Connect (OSTI)

As part of its commitment to promoting and improving the local enforcement of appliance energy efficiency standards and labeling, the China National Institute of Standardization (CNIS) launched the National and Local Enforcement of Energy Efficiency Standards and Labeling project on August 14, 2009. The project’s short-term goal is to expand the effort to improve enforcement of standards and labeling requirements to the entire country within three years, with a long-term goal of perfecting overall enforcement. For this project, Jiangsu, Shandong, Sichuan and Shanghai were selected as pilot locations. This report provides information on the local enforcement project’s recent background, activities and results as well as comparison to previous rounds of check-testing in 2006 and 2007. In addition, the report also offers evaluation on the achievement and weaknesses in the local enforcement scheme and recommendations. The results demonstrate both improvement and some backsliding. Enforcement schemes are in place in all target cities and applicable national standards and regulations were followed as the basis for local check testing. Check testing results show in general high labeling compliance across regions with 100% compliance for five products, including full compliance for all three products tested in Jiangsu province and two out of three products tested in Shandong province. Program results also identified key weaknesses in labeling compliance in Sichuan as well as in the efficiency standards compliance levels for small and medium three-phase asynchronous motors and self-ballasted fluorescent lamps. For example, compliance for the same product ranged from as low as 40% to 100% with mixed results for products that had been tested in previous rounds. For refrigerators, in particular, the efficiency standards compliance rate exhibited a wider range of 50% to 100%, and the average rate across all tested models also dropped from 96% in 2007 to 63%, possibly due to the implementation of newly strengthened efficiency standards in 2009. Areas for improvement include: Greater awareness at the local level to ensure that all manufacturers register their products with the label certification project and to minimize their resistance to inspections; improvement of the product sampling methodology to include representative testing of both large and small manufacturers and greater standardization of testing tools and procedures; and continued improvement in local enforcement efforts.

Zhou, Nan; Zheng, Nina; Fino-Chen, Cecilia; Fridley, David; Ning, Cao

2011-09-26T23:59:59.000Z

207

Energy Efficiency and Sustainable Construction Standards for Public Buildings  

Broader source: Energy.gov [DOE]

Senate Bill 130 of 2008 established energy efficiency goals for new state building projects. All major facility projects over 10,000 square feet should strive to exceed the efficiency standards of...

208

Nationwide: New Efficiency Standards for Power Supplies Anticipate...  

Energy Savers [EERE]

Efficiency Standards for Microwave Ovens Saves Consumers Energy and Updates the Social Cost of Carbon California: Heliotrope Technologies Wins R&D 100 Award for Universal Smart...

209

Standard Energy Efficiency Data (SEED) Platform - 2014 BTO Peer...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Presentation More Documents & Publications Standard Energy Efficiency Database Platform - 2013 BTO Peer Review LBNL SEED: Why Open Source Overview LBNL SEED for Cities Overview...

210

Energy Efficiency Standards for Refrigerators in Brazil: A Methodology...  

Open Energy Info (EERE)

for Impact Evaluation Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Energy Efficiency Standards for Refrigerators in Brazil: A Methodology for Impact Evaluation Focus...

211

Energy-Efficient Building Standards for State Facilities  

Broader source: Energy.gov [DOE]

Via Executive Order 27, Maine requires that construction or renovation of state buildings must incorporate "green building" standards that would achieve "significant" energy efficiency and...

212

Mitigating Carbon Emissions: the Potential of Improving Efficiencyof Household Appliances in China  

SciTech Connect (OSTI)

China is already the second's largest energy consumer in the world after the United States, and its demand for energy is expected to continue to grow rapidly in the foreseeable future, due to its fast economic growth and its low level of energy use per capita. From 2001 to 2005, the growth rate of energy consumption in China has exceeded the growth rate of its economy (NBS, 2006), raising serious concerns about the consequences of such energy use on local environment and global climate. It is widely expected that China is likely to overtake the US in energy consumption and greenhouse gas (GHG) emissions during the first half of the 21st century. Therefore, there is considerable interest in the international community in searching for options that may help China slow down its growth in energy consumption and GHG emissions through improving energy efficiency and adopting more environmentally friendly fuel supplies such as renewable energy. This study examines the energy saving potential of three major residential energy end uses: household refrigeration, air-conditioning, and water heating. China is already the largest consumer market in the world for household appliances, and increasingly the global production base for consumer appliances. Sales of household refrigerators, room air-conditioners, and water heaters are growing rapidly due to rising incomes and booming housing market. At the same time, the energy use of Chinese appliances is relatively inefficient compared to similar products in the developed economies. Therefore, the potential for energy savings through improving appliance efficiency is substantial. This study focuses particularly on the impact of more stringent energy efficiency standards for household appliances, given that such policies are found to be very effective in improving the efficiency of household appliances, and are well established both in China and around world (CLASP, 2006).

Lin, Jiang

2006-07-10T23:59:59.000Z

213

Stronger Manufacturers' Energy Efficiency Standards for Residential...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

2006 - 11:09am Addthis WASHINGTON, DC -- To increase the energy efficiency of residential air conditioners, the U.S. Department of Energy (DOE) has issued new manufacturing...

214

Energy Efficiency Standards for Public Buildings  

Broader source: Energy.gov [DOE]

In May 2008, Idaho enacted HB 422 (the Energy Efficient State Building Act) to reduce the amount of energy consumed by state facilities. To the extent feasible and practical, all major facility...

215

Development of minimum efficiency standards for large capacity air conditioners, and commercial water heaters, refrigerators, and freezers. Final report  

SciTech Connect (OSTI)

The California Energy Resources Conservation and Development Commission has promulgated appliance energy efficiency standards and energy conservation standards for new construction with the objective of reducing energy consumption in the State of California. The following appliance categories are specifically addressed: large capacity air conditioners; commercial water heaters; and commercial refrigerators and freezers. The tasks that have been performed include: an energy use pattern study for the subject equipment; an examination of the size distribution of commercial air conditioning equipment; an examination of the different types of commercial air conditioning systems; an evaluation of the effectiveness of economizers in reducing commercial air conditioning system energy consumption in California; an examination of the effects of oversizing commercial air conditioners; a detailed study of supermarket refrigeration and air conditioning equipment; an evaluation of the economic feasibility of utilizing air conditioner waste heat to heat water; an assessment of the applicability of existing test procedures for small water heaters to large water heaters; and a brief investigation of the marketing and distribution systems for air conditioning and refrigeration equipment. Results of the efforts are described.

Merrill, P.S.; Rettberg, R.J.; Erickson, R.C.; Toor, J.S.

1980-05-01T23:59:59.000Z

216

Kitchen Appliance Upgrades Improve Water Efficiency at DOD Exchange Facilities: Best Management Practice Case Study #11: Commercial Kitchen Equipment (Brochure)  

SciTech Connect (OSTI)

The Exchange, formerly the Army and Air Force Exchange Service (AAFES), is a joint military activity and the U.S. Department of Defense?s (DOD) oldest and largest retailer. The Exchange is taking a leadership role in water efficiency improvements in their commercial kitchens by integrating water efficiency concepts into the organization?s overall sustainability plan and objectives.

Not Available

2011-09-01T23:59:59.000Z

217

Regional cooperation in energy efficiency standard-setting and labeling in North America  

SciTech Connect (OSTI)

The North American Energy Working Group (NAEWG) was established in 2001 by the governments of Canada, Mexico, and the United States. The goals of NAEWG are to foster communication and cooperation on energy-related matters of common interest, and to enhance North American energy trade and interconnections consistent with the goal of sustainable development, for the benefit of all three countries. At its outset, NAEWG established teams to address different aspects of the energy sector. One, the Energy Efficiency Expert Group, undertook activity in three areas: (1) analyzing commonalities and differences in the test procedures of Canada, Mexico, and the United States, and identifying specific products for which the three countries might consider harmonization; (2) exploring possibilities for increased mutual recognition of laboratory test results; and (3) looking at possibilities for enhanced cooperation in the Energy Star voluntary endorsement labeling program. To support NAEWG's Expert Group on Energy Efficiency (NAEWG-EE), USDOE commissioned Lawrence Berkeley National Laboratory, representing the Collaborative Labeling and Appliance Standards Program (CLASP), to prepare a resource document comparing current standards, labels, and test procedure regulations in Canada, Mexico, and the United States. The resulting document identified 46 energy-using products for which at least one of the three countries has energy efficiency regulations. Three products--refrigerators/freezers, room air conditioners, and integral horsepower three-phase electric motors--have identical minimum energy performance standards (MEPS) and test procedures in the three countries. Ten other products have different MEPS and test procedures, but have the near-term potential for harmonization. NAEWG-EE is currently working to identify mechanisms for mutual recognition of test results. With consultative support from the United States and Canada through NAEWG-EE, Mexico is exploring possibilities for extending the Energy Star endorsement label to Mexico.

Wiel, Stephen; Van Wie McGrory, Laura

2003-08-04T23:59:59.000Z

218

Reseach and development of energy-efficient appliance motor-compressors. Final report. Volume III: development and field test plan  

SciTech Connect (OSTI)

By means of a program of theoretical analysis, development, and testing of samples, it was found that significant improvements could be made in the energy efficiency ratio (EER) of hermetic motor-compressor assemblies. The high efficiency designs resulting from the development program are believed to be suitable for quantity production without excessive facilities cost, to have acceptable levels of performance and reliability, and to be producible at costs which will make them commercially attractive. The steps involved in the development of the improved compressor design are described in detail. The major purpose of Phase II of the project is to verify the reliability of the high-efficiency designs by means of a field demonstration program.

Nelson, R.T.; MacCarthy, P.W.

1980-09-01T23:59:59.000Z

219

New Energy Efficiency Standards for Microwave Ovens to Save Consumers...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

through 2030. Over the next 30 years, it will dramatically reduce harmful carbon pollution, equivalent to taking over 12 million new cars off the road for one year. "Appliance...

220

Potential Impact of Adopting Maximum Technologies as Minimum Efficiency Performance Standards in the U.S. Residential Sector  

SciTech Connect (OSTI)

The US Department of Energy (US DOE) has placed lighting and appliance standards at a very high priority of the U.S. energy policy. However, the maximum energy savings and CO2 emissions reduction achievable via minimum efficiency performance standards (MEPS) has not yet been fully characterized. The Bottom Up Energy Analysis System (BUENAS), first developed in 2007, is a global, generic, and modular tool designed to provide policy makers with estimates of potential impacts resulting from MEPS for a variety of products, at the international and/or regional level. Using the BUENAS framework, we estimated potential national energy savings and CO2 emissions mitigation in the US residential sector that would result from the most aggressive policy foreseeable: standards effective in 2014 set at the current maximum technology (Max Tech) available on the market. This represents the most likely characterization of what can be maximally achieved through MEPS in the US. The authors rely on the latest Technical Support Documents and Analytical Tools published by the U.S. Department of Energy as a source to determine appliance stock turnover and projected efficiency scenarios of what would occur in the absence of policy. In our analysis, national impacts are determined for the following end uses: lighting, television, refrigerator-freezers, central air conditioning, room air conditioning, residential furnaces, and water heating. The analyzed end uses cover approximately 65percent of site energy consumption in the residential sector (50percent of the electricity consumption and 80percent of the natural gas and LPG consumption). This paper uses this BUENAS methodology to calculate that energy savings from Max Tech for the U.S. residential sector products covered in this paper will reach an 18percent reduction in electricity demand compared to the base case and 11percent in Natural Gas and LPG consumption by 2030 The methodology results in reductions in CO2 emissions of a similar magnitude.

Letschert, Virginie; Desroches, Louis-Benoit; McNeil, Michael; Saheb, Yamina

2010-05-03T23:59:59.000Z

Note: This page contains sample records for the topic "appliance efficiency standards" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Energy Efficiency Standards and Labels in North America: Opportunities for Harmonization  

E-Print Network [OSTI]

and Equipment Energy Efficiency Committee. Available fromE. McMahon. 2001. Energy-Efficiency Labels and Standards: ALloyd. 1999. Review of energy efficiency test standards and

Wiel, Stephen

2008-01-01T23:59:59.000Z

222

New Energy Efficiency Standards for Metal Halide Lamp Fixtures...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Metal Halide Lamp Fixtures to Save on Energy Bills and Reduce Carbon Pollution New Energy Efficiency Standards for Metal Halide Lamp Fixtures to Save on Energy Bills and Reduce...

223

New Energy Efficiency Standards for Electric Motors and Walk...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Motors and Walk-in Coolers and Freezers to Save on Energy Bills and Reduce Carbon Pollution New Energy Efficiency Standards for Electric Motors and Walk-in Coolers and Freezers...

224

Technical support document: Energy efficiency standards for consumer products: Refrigerators, refrigerator-freezers, and freezers including draft environmental assessment, regulatory impact analysis  

SciTech Connect (OSTI)

The Energy Policy and Conservation Act (P.L. 94-163), as amended by the National Appliance Energy Conservation Act of 1987 (P.L. 100-12) and by the National Appliance Energy Conservation Amendments of 1988 (P.L. 100-357), and by the Energy Policy Act of 1992 (P.L. 102-486), provides energy conservation standards for 12 of the 13 types of consumer products` covered by the Act, and authorizes the Secretary of Energy to prescribe amended or new energy standards for each type (or class) of covered product. The assessment of the proposed standards for refrigerators, refrigerator-freezers, and freezers presented in this document is designed to evaluate their economic impacts according to the criteria in the Act. It includes an engineering analysis of the cost and performance of design options to improve the efficiency of the products; forecasts of the number and average efficiency of products sold, the amount of energy the products will consume, and their prices and operating expenses; a determination of change in investment, revenues, and costs to manufacturers of the products; a calculation of the costs and benefits to consumers, electric utilities, and the nation as a whole; and an assessment of the environmental impacts of the proposed standards.

NONE

1995-07-01T23:59:59.000Z

225

Codes and Standards Title 24 Energy-Efficient Local Ordinances  

E-Print Network [OSTI]

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 #12;Energy Cost-Effectiveness Study for Local Green Building Ordinances in Climate Zone 6, 12 Standards. The energy requirements of a local green building ordinance are not legally enforceable untilCodes and Standards Title 24 Energy-Efficient Local Ordinances Title: Climate Zone 6 Energy Cost

226

2008 Building Energy2008 Building Energyg gy Efficiency Standards  

E-Print Network [OSTI]

Buildings p , p g , Luminaire Power, etc. for Nonresidential Buildings 4 #12;What is New for 2008? R d l B ld What is New for 2008? R d l B ldResidential BuildingsResidential Buildings Mandatory Measures2008 Building Energy2008 Building Energyg gy Efficiency Standards g gy Efficiency Standardsfficie

227

Retrospective Evaluation of Appliance Price Trends  

E-Print Network [OSTI]

Home Appliance Manufacturers (AHAM), 1978–2001 AssociationHome Appliance Manufacturers (AHAM), 1978–2001. Directory ofAppliance Manufacturers (AHAM) certified directory where

Dale, Larry

2010-01-01T23:59:59.000Z

228

International Review of the Development and Implementation of Energy Efficiency Standards and Labeling Programs  

SciTech Connect (OSTI)

Appliance energy efficiency standards and labeling (S&L) programs have been important policy tools for regulating the efficiency of energy-using products for over 40 years and continue to expand in terms of geographic and product coverage. The most common S&L programs include mandatory minimum energy performance standards (MEPS) that seek to push the market for efficient products, and energy information and endorsement labels that seek to pull the market. This study seeks to review and compare some of the earliest and most well-developed S&L programs in three countries and one region: the U.S. MEPS and ENERGY STAR, Australia MEPS and Energy Label, European Union MEPS and Ecodesign requirements and Energy Label and Japanese Top Runner programs. For each program, key elements of S&L programs are evaluated and comparative analyses across the programs undertaken to identify best practice examples of individual elements as well as cross-cutting factors for success and lessons learned in international S&L program development and implementation. The international review and comparative analysis identified several overarching themes and highlighted some common factors behind successful program elements. First, standard-setting and programmatic implementation can benefit significantly from a legal framework that stipulates a specific timeline or schedule for standard-setting and revision, product coverage and legal sanctions for non-compliance. Second, the different MEPS programs revealed similarities in targeting efficiency gains that are technically feasible and economically justified as the principle for choosing a standard level, in many cases at a level that no product on the current market could reach. Third, detailed survey data such as the U.S. Residential Energy Consumption Survey (RECS) and rigorous analyses provide a strong foundation for standard-setting while incorporating the participation of different groups of stakeholders further strengthen the process. Fourth, sufficient program resources for program implementation and evaluation are critical to the effectiveness of standards and labeling programs and cost-sharing between national and local governments can help ensure adequate resources and uniform implementation. Lastly, check-testing and punitive measures are important forms of enforcement while the cancellation of registration or product sales-based fines have also proven effective in reducing non-compliance. The international comparative analysis also revealed the differing degree to which the level of government decentralization has influenced S&L programs and while no single country has best practices in all elements of standards and labeling development and implementation, national examples of best practices for specific elements do exist. For example, the U.S. has exemplified the use of rigorous analyses for standard-setting and robust data source with the RECS database while Japan?s Top Runner standard-setting principle has motivated manufacturers to exceed targets. In terms of standards implementation and enforcement, Australia has demonstrated success with enforcement given its long history of check-testing and enforcement initiatives while mandatory information-sharing between EU jurisdictions on compliance results is another important enforcement mechanism. These examples show that it is important to evaluate not only the drivers of different paths of standards and labeling development, but also the country-specific context for best practice examples in order to understand how and why certain elements of specific S&L programs have been effective.

Zhou, Nan; Zheng, Nina; Fridley, David

2012-02-28T23:59:59.000Z

229

International Review of the Development and Implementation of Energy Efficiency Standards and Labeling Programs  

E-Print Network [OSTI]

Appliance Manufacturers. 2010. “AHAM Certification ProgramAppliance Manufacturers (AHAM) from its association members.trade associations such as AHAM and the Air Conditioning,

Zhou, Nan

2013-01-01T23:59:59.000Z

230

Midea Washing Appliance: Proposed Penalty (2011-CE-1903)  

Broader source: Energy.gov [DOE]

DOE alleged in a Notice of Proposed Civil Penalty that Midea Washing Appliances Mfg. Co., Ltd. failed to certify a variety of dishwashers as compliant with the applicable water and energy conservation standards.

231

ASKO Appliances: Order (2012-CE-19/2004)  

Broader source: Energy.gov [DOE]

DOE ordered ASKO Appliances, Inc. to pay a $36,500 civil penalty after finding ASKO had failed to certify that certain models of residential dishwashers and clothes washers comply with the applicable energy and water conservation standards.

232

ASKO Appliances: Proposed Penalty (2012-CE-19/2004)  

Broader source: Energy.gov [DOE]

DOE alleged in a Notice of Proposed Civil Penalty that ASKO Appliances, Inc. failed to certify residential clothes washers and dishwashers as compliant with the applicable energy and water conservation standards.

233

Codes and Standards Title 24 Energy-Efficient Local Ordinances  

E-Print Network [OSTI]

Codes and Standards Title 24 Energy-Efficient Local Ordinances Title: San Mateo County Green Mateo County Green Building Ordinance Energy Cost-Effectiveness Study December 31, 2009 Report prepared . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 #12;Energy Cost-Effectiveness Study for the San Mateo County Green Building Ordinance, 12

234

45-Day Language Hearing Agenda Building Energy Efficiency Standards  

E-Print Network [OSTI]

Shirakh 09:15 AM Revisions to Sections 10-101 ­ 10-114 ­ Energy Building Regulations, All Occupancies Gary45-Day Language Hearing Agenda Building Energy Efficiency Standards Revisions for Residential for Solar Ready Buildings ­ All Occupancies Patrick Saxton 10:35 AM Revisions to Sections 150

235

E-Print Network 3.0 - appliance price trends Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AND INTERVENTION STRATEGIES Final... Report on Appliance Standards Compliance Enforcement Strategies Prepared For: CALIFORNIA ENERGY... Tovah Ealey Contract Manager G. William...

236

E-Print Network 3.0 - appliances walking sticks Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

to the operating efficiency of appliances and their relationship with demand response and load management Source: California Energy Commission Collection: Energy Storage,...

237

E-Print Network 3.0 - appliances generate energy Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

RESOURCES AGENCY EDMUND G. BROWN JR., Governor CALIFORNIA ENERGY COMMISSION Summary: Test Laboratory Approval Process The California Energy Commission's Appliance Efficiency...

238

Fourteenth Semi-Annual Report to Congress on Appliance Energy Efficiency Rulemakings Â… Implementation Report: Energy Conservation Standards Activities  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-UpHeat PumpRecordFederal7.pdfFlash_2010_-24.pdfOverviewPlansBuildingsFour Crazy Usesof

239

15th Semi-Annual Report to Congress on Appliance Energy Efficiency Rulemakings Â… Implementation Report: Energy Conservation Standards Activities  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-Up from theDepartment( Sample of Shipment Notice)1021STATE ENERGY PROGRAM-to-1

240

CALIFORNIA STATEWIDE RESIDENTIAL APPLIANCE  

E-Print Network [OSTI]

methodology and results report that includes energy consumption tables from the conditional demand analysis Energy Consumption and Appliance Saturation Summaries. Results from the Conditional Demand Analysis (CDA conditioning is the primary driver of peak energy demand in California and the saturation of central air

Note: This page contains sample records for the topic "appliance efficiency standards" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Analysis of Potential Energy Saving and CO2 Emission Reduction of Home Appliances and Commercial Equipments in China  

SciTech Connect (OSTI)

China has implemented a series of minimum energy performance standards (MEPS) for over 30 appliances, voluntary energy efficiency label for 40 products and a mandatory energy information label that covers 19 products to date. However, the impact of these programs and their savings potential has not been evaluated on a consistent basis. This paper uses modeling to estimate the energy saving and CO{sub 2} emission reduction potential of the appliances standard and labeling program for products for which standards are currently in place, under development or those proposed for development in 2010 under three scenarios that differ in the pace and stringency of MEPS development. In addition to a baseline 'Frozen Efficiency' scenario at 2009 MEPS level, the 'Continued Improvement Scenario' (CIS) reflects the likely pace of post-2009 MEPS revisions, and the likely improvement at each revision step. The 'Best Practice Scenario' (BPS) examined the potential of an achievement of international best practice efficiency in broad commercial use today in 2014. This paper concludes that under 'CIS', cumulative electricity consumption could be reduced by 9503 TWh, and annual CO{sub 2} emissions of energy used for all 37 products would be 16% lower than in the frozen efficiency scenario. Under a 'BPS' scenario for a subset of products, cumulative electricity savings would be 5450 TWh and annual CO{sub 2} emissions reduction of energy used for 11 appliances would be 35% lower.

Zhou, Nan; Fridley, David; McNeil, Michael; Zheng, Nina; Letschert, Virginie; Ke, Jing

2011-04-01T23:59:59.000Z

242

2013 California Building Energy Efficiency Standards December 2011 CODES AND STANDARDS ENHANCEMENT INITIATIVE (CASE)  

E-Print Network [OSTI]

INITIATIVE (CASE) Residential Refrigerant Charge Testing and Related Issues 2013 California Building Energy-owned rights including, but not limited to, patents, trademarks or copyrights #12;Residential Refrigerant Charge Testing and Related Issues Page 2 2013 California Building Energy Efficiency Standards December

243

Cal Poly, San Luis Obispo | University Housing Update to Appliance and Electronic Device Guidelines for Residence Halls  

E-Print Network [OSTI]

Cal Poly, San Luis Obispo | University Housing Update to Appliance and Electronic Device Guidelines guidelines. This guideline notice serves as a campus update to the Appliance and Electronic Device Community appliances and personal care devices being used in the rooms. Often these items are not energy efficient

Sze, Lawrence

244

Norwich Public Utilities (Electric)- Residential Energy Efficiency Rebate Program  

Broader source: Energy.gov [DOE]

Norwich Public Utilities (NPU) provides residential customers with rebates on the ENERGY STAR-qualified appliances and energy efficient HVAC equipment. Eligible appliance purchases include...

245

Okanogan County PUD- Residential Energy Efficiency Rebate Program  

Broader source: Energy.gov [DOE]

Public Utility District No. 1 of Okanogan County provides rebates to residential customers for purchasing energy efficient appliances. The qualifying appliance must be installed in a location that...

246

2009 CALIFORNIA RESIDENTIAL APPLIANCE SATURATION STUDY  

E-Print Network [OSTI]

2009 CALIFORNIA RESIDENTIAL APPLIANCE SATURATION STUDY Volume 1 and administered a Residential Appliance Saturation Study that serves as an update to the 2003 RASS, with the same residential enduses and appliance saturations for households. These consumption estimates were developed

247

2009 CALIFORNIA RESIDENTIAL APPLIANCE SATURATION STUDY  

E-Print Network [OSTI]

2009 CALIFORNIA RESIDENTIAL APPLIANCE SATURATION STUDY Executive and administered a Residential Appliance Saturation Study that serves as an update to the 2003 RASS, with the same residential enduses and appliance saturations for households. These consumption estimates were developed

248

Modeling diffusion of electrical appliances in the residential sector  

SciTech Connect (OSTI)

This paper presents a methodology for modeling residential appliance uptake as a function of root macroeconomic drivers. The analysis concentrates on four major energy end uses in the residential sector: refrigerators, washing machines, televisions and air conditioners. The model employs linear regression analysis to parameterize appliance ownership in terms of household income, urbanization and electrification rates according to a standard binary choice (logistic) function. The underlying household appliance ownership data are gathered from a variety of sources including energy consumption and more general standard of living surveys. These data span a wide range of countries, including many developing countries for which appliance ownership is currently low, but likely to grow significantly over the next decades as a result of economic development. The result is a 'global' parameterization of appliance ownership rates as a function of widely available macroeconomic variables for the four appliances studied, which provides a reliable basis for interpolation where data are not available, and forecasting of ownership rates on a global scale. The main value of this method is to form the foundation of bottom-up energy demand forecasts, project energy-related greenhouse gas emissions, and allow for the construction of detailed emissions mitigation scenarios.

McNeil, Michael A.; Letschert, Virginie E.

2009-11-22T23:59:59.000Z

249

Appliances, Lighting, Electronics, and Miscellaneous Equipment Electricity Use in New Homes  

E-Print Network [OSTI]

62440 Appliances, Lighting, Electronics, and Miscellaneousof California. Appliances, Lighting, Electronics, anduses (appliances, lighting, electronics, and miscellaneous

Brown, Richard E.; Rittelman, William; Parker, Danny; Homan, Gregory

2007-01-01T23:59:59.000Z

250

Global Potential of Energy Efficiency Standards and Labeling Programs  

E-Print Network [OSTI]

Efficiency in Electricity Consumption. HWWA , HamburgischesB. Atanasiu (2006). Electricity Consumption and EfficiencyB. Atanasiu (2006). Electricity Consumption and Efficiency

McNeil, Michael A

2008-01-01T23:59:59.000Z

251

Global Potential of Energy Efficiency Standards and Labeling Programs  

E-Print Network [OSTI]

as furnaces or boilers lose efficiency through heat thatwww.eccj.or.jp Efficiency for both boiler and instantaneousto have same efficiency as Gas Boiler/ Furnace Assumption

McNeil, Michael A

2008-01-01T23:59:59.000Z

252

Analysis of Potential Energy Saving and CO2 Emission Reduction of Home Appliances and Commercial Equipments in China  

SciTech Connect (OSTI)

China is now the world's largest producer and consumer of household appliances and commercial equipment. To address the growth of electricity use of the appliances, China has implemented a series of minimum energy performance standards (MEPS) for 30 appliances, and voluntary energy efficiency label for 40 products. Further, in 2005, China started a mandatory energy information label that covers 19 products to date. However, the impact of these standard and labeling programs and their savings potential has not been evaluated on a consistent basis. This research involved modeling to estimate the energy saving and CO{sub 2} emission reduction potential of the appliances standard and labeling program for products for which standards are currently in place, or under development and those proposed for development in 2010. Two scenarios that have been developed differ primarily in the pace and stringency of MEPS development. The 'Continued Improvement Scenario' (CIS) reflects the likely pace of post-2009 MEPS revisions, and the likely improvement at each revision step considering the technical limitation of the technology. The 'Best Practice Scenario' (BPS) examined the potential of an achievement of international best practice MEPS in 2014. This paper concludes that under the 'CIS' of regularly scheduled MEPS revisions to 2030, cumulative electricity consumption could be reduced by 9503 TWh, and annual CO{sub 2} emissions would be 16% lower than in the frozen efficiency scenario. Under a 'BPS' scenario for a subset of products, cumulative electricity savings would be 5450 TWh and annual CO{sub 2} emissions reduction would be 35% lower than in the frozen scenario.

Zhou, Nan; Fridley, David; McNeill, Michael; Zheng, Nina; Letschert, Virginie; Ke, Jing; Saheb, Yamina

2010-06-07T23:59:59.000Z

253

State Energy Efficiency Resource Standards: Design, Status, and Impacts  

SciTech Connect (OSTI)

An energy efficiency resource standard (EERS) is a policy that requires utilities or other entities to achieve a specified amount of energy savings through customer energy efficiency programs within a specified timeframe. EERSs may apply to electricity usage, natural gas usage, or both. This paper provides an overview of the key design features of EERSs for electricity, reviews the variation in design of EERSs across states, and provides an estimate of the amount of savings required by currently specified EERSs in each state. As of December, 2013, 23 states have active and binding EERSs for electricity. We estimate that state EERSs will require annual electricity savings of approximately 8-11% of total projected demand by 2020 in states with EERSs, however the level of savings targeted by the policies varies significantly across states. In addition to the variation in targeted savings, the design of EERSs varies significantly across states leading to differences in the suite of incentives created by the policy, the flexibility of compliance with the policy, the balance of benefits and costs of the policy between producers and consumers, and the certainty with which the policy will drive long-term savings.

Steinberg, D.; Zinaman, O.

2014-05-01T23:59:59.000Z

254

Remote repair appliance  

DOE Patents [OSTI]

A remote appliance for supporting a tool for performing work at a work site on a substantially circular bore of a work piece and for providing video signals of the work site to a remote monitor comprises: a base plate having an inner face and an outer face; a plurality of rollers, wherein each roller is rotatably and adjustably attached to the inner face of the base plate and positioned to roll against the bore of the work piece when the base plate is positioned against the mouth of the bore such that the appliance may be rotated about the bore in a plane substantially parallel to the base plate; a tool holding means for supporting the tool, the tool holding means being adjustably attached to the outer face of the base plate such that the working end of the tool is positioned on the inner face side of the base plate; a camera for providing video signals of the work site to the remote monitor; and a camera holding means for supporting the camera on the inner face side of the base plate, the camera holding means being adjustably attached to the outer face of the base plate. In a preferred embodiment, roller guards are provided to protect the rollers from debris and a bore guard is provided to protect the bore from wear by the rollers and damage from debris. 5 figs.

Heumann, F.K.; Wilkinson, J.C.; Wooding, D.R.

1997-12-16T23:59:59.000Z

255

Energy efficiency, market failures, and government policy  

SciTech Connect (OSTI)

This paper presents a framework for evaluating engineering-economic evidence on the diffusion of energy efficiency improvements. Four examples are evaluated within this framework. The analysis provides evidence of market failures related to energy efficiency. Specific market failures that may impede the adoption of cost-effective energy efficiency are discussed. Two programs that have had a major impact in overcoming these market failures, utility DSM programs and appliance standards, are described.

Levine, M.D.; Koomey, J.G.; McMahon, J.E.; Sanstad, A.H. [Lawrence Berkeley Lab., CA (United States). Energy and Environment Div.; Hirst, E. [Oak Ridge National Lab., TN (United States). Energy Div.

1994-03-01T23:59:59.000Z

256

Energy Efficiency in India: Challenges and Initiatives  

ScienceCinema (OSTI)

May 13, 2010 EETD Distinguished Lecture: Ajay Mathur is Director General of the Bureau of Energy Efficiency, and a member of the Prime Minister's Council on Climate Change. As Director General of BEE, Dr. Mathur coordinates the national energy efficiency programme, including the standards and labeling programme for equipment and appliances; the energy conservation building code; the industrial energy efficiency programme, and the DSM programmes in the buildings, lighting, and municipal sectors.

Ajay Mathur

2010-09-01T23:59:59.000Z

257

Nebraska Appliance Rebate Program opens  

Broader source: Energy.gov [DOE]

Nearly 500 people lined up outside of Omaha's Nebraska Furniture Mart on July 6, waiting to get ENERGY STAR washing machines, dishwashers and refrigerators on the first day of Nebraska's Appliance Rebate Program.

258

Effect of Energy Efficiency Standards on Natural Gas Prices  

E-Print Network [OSTI]

of a recently proposed water heater standard. The resultspurchases a new gas-fired water heater, she will maximizeefficiency standard for water heaters. 1.2 Overview of the

Carnall, Michael

2012-01-01T23:59:59.000Z

259

Energy Efficiency and Green Building Standards for State Buildings  

Broader source: Energy.gov [DOE]

In March, 2006, Wisconsin enacted SB 459, the Energy Efficiency and Renewables Act. With respect to energy efficiency, this bill requires the Department of Administration (DOA) to prescribe and...

260

Japan's Residential Energy Demand Outlook to 2030 Considering Energy Efficiency Standards "Top-Runner Approach"  

E-Print Network [OSTI]

Space Heaters, Gas Cooking Appliances, Gas Water Heaters,Oil Water Heaters, Electric Toilet Seats, Vending MachinesFlorescent Lights Gas Water Heaters Oil Water Heaters

Komiyama, Ryoichi

2008-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "appliance efficiency standards" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

E-Print Network 3.0 - automobile efficiency standards Sample...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Search Powered by Explorit Topic List Advanced Search Sample search results for: automobile efficiency standards Page: << < 1 2 3 4 5 > >> 1 Links and Abstracts for Papers on...

262

National Energy Efficiency Evaluation, Measurement and Verification (EM&V) Standard: Scoping Study of Issues and Implementation Requirements  

E-Print Network [OSTI]

Actuarial Pricing Of Energy Efficiency Projects: Lessonsand Effectiveness of Energy Efficiency Programs,” LBNL-ACEEE 2010. “State Energy Efficiency Resource Standard (

Schiller, Steven R.

2011-01-01T23:59:59.000Z

263

Global Potential of Energy Efficiency Standards and Labeling Programs  

E-Print Network [OSTI]

Domestic Electric Storage Water Heater (DESWH) Test Methodsand Renewable Energy (2000). Water Heater Energy StandardsAir Conditioners, Water Heaters, Direct Heating Equipment,

McNeil, Michael A

2008-01-01T23:59:59.000Z

264

New Energy Efficiency Standards for External Power Supplies to...  

Energy Savers [EERE]

on President Obama's State of the Union address, which called for reducing carbon pollution and helping communities move to greater energy efficiency, the Energy Department...

265

Global Potential of Energy Efficiency Standards and Labeling Programs  

E-Print Network [OSTI]

Administration UTE (1999). UTE Uruguay Consumo de Energía387. McNeil, M. (2003). Uruguay Energy Efficiency Project -Administration UTE (1999). UTE Uruguay Consumo de Energía

McNeil, Michael A

2008-01-01T23:59:59.000Z

266

City of Asheville- Efficiency Standards for City Buildings  

Broader source: Energy.gov [DOE]

In April 2007, the Asheville City Council adopted carbon emission reduction goals and set LEED standards for new city buildings. The council committed to reducing carbon emissions by 2% per year...

267

Global Potential of Energy Efficiency Standards and Labeling Programs  

E-Print Network [OSTI]

impact of room air conditioners energy labels in Malaysia."of electric Room Air Conditioner." Energy Economics 20Standard Levels for Room Air Conditioners. McNeil, M. A. ,

McNeil, Michael A

2008-01-01T23:59:59.000Z

268

Global Potential of Energy Efficiency Standards and Labeling Programs  

E-Print Network [OSTI]

report estimates the global potential reductions in greenhouse gas emissions by 2030 for energy efficiencyreport estimates the global potential reductions in greenhouse gas emissions by 2030 for energy efficiency

McNeil, Michael A

2008-01-01T23:59:59.000Z

269

Modeling of GE Appliances: Final Presentation  

SciTech Connect (OSTI)

This report is the final in a series of three reports funded by U.S. Department of Energy Office of Electricity Delivery and Energy Reliability (DOE-OE) in collaboration with GE Appliances’ through a Cooperative Research and Development Agreement (CRADA) to describe the potential of GE Appliances’ DR-enabled appliances to provide benefits to the utility grid.

Fuller, Jason C.; Vyakaranam, Bharat; Leistritz, Sean M.; Parker, Graham B.

2013-01-31T23:59:59.000Z

270

Department of Energy Opens Appliance Standards Investigation...  

Broader source: Energy.gov (indexed) [DOE]

Energy announced today that it has opened an investigation to determine whether certain air conditioners and heat pump products manufactured by Air Con International comply with...

271

Incorporating Experience Curves in Appliance Standards Analysis  

E-Print Network [OSTI]

residential central air condi- tioners, central heat pumps, and furnaces, collectively referred to as heating,

Desroches, Louis-Benoit

2012-01-01T23:59:59.000Z

272

How to Make Appliance Standards Work: Improving  

E-Print Network [OSTI]

of the process, the DOE would benefit from having a core team of qualified staff but would also engage, manufacturer, or otherwise, does not necessarily constitute or imply its endorsement, recommendation.S., but an analogous framework would be appropriate in other nations. The U.S. Department of Energy (DOE) currently

273

Incorporating Experience Curves in Appliance Standards Analysis  

E-Print Network [OSTI]

furnaces, and refrigerators and freezers. These allow us topumps, furnaces, refrigerators and freezers (US DepartmentPCU333415333415C Refrigerators and freezers Household

Desroches, Louis-Benoit

2012-01-01T23:59:59.000Z

274

Appliance Standards Resources | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarly Career Scientists' ResearchThe OfficeUtility Fed.9-0s)Excel workbook (version 5.2)October 26, 2011 2The

275

Appliance Standards Awareness Project | Department of Energy  

Energy Savers [EERE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion |Energyon ArmedWaste andAccess to OUO Access to OUOAlaskaMoneyEnergyAnnualServices

276

Energy efficiency standards for eight consumer products: public meeting clarification, questions and answers  

SciTech Connect (OSTI)

Eighteen corporations and manufacturers provided answers to many questions posed at a public meeting on energy efficiency standards for eight consumer products. Questions on the regulations concerning the manufacturing standards, performance standards, and testing standards are included. Questions were posed about air conditioners, refrigerators, refrigerator-freezers, stoves (ranges), ovens, clothes dryers, oil fired burners, water heaters, furnaces, etc. A presentation containing information pertaining to the values of average annual energy consumption per unit used by DOE in its analysis leading to proposed energy efficiency standards for nine types of consumer products is included. (MCW)

None

1980-08-01T23:59:59.000Z

277

Calif~rnia Energy Commission ENERGY EFFICIENCY STANDARDS  

E-Print Network [OSTI]

and Cooling Cooling with Outdoor Air Electric Resistance ,Heating Systems Power Consumption of Fans Maximum until 1/1-/87)!' f' tl ~ il ENERGY EFFICIENT August 1985 P400-84-007 For historical reference Current of Energy Consumption Compliance Approaches Sections 2-5305 thru 2-5310 are not used Page 13 17 23 24 Energy

278

Impact of New Federal Efficiency Performance Standards on the Industrial Motor Marketplace  

E-Print Network [OSTI]

Impact of New Federal Efficiency Performance Standards on the Industrial Motor Marketplace R. Neal Elliott, Ph.D., P.E. Associate Director for Research American Council for an Energy-Efficient Economy Washington, DC ABSTRACT.... As noted above, beginning in the 1980's, the National Electrical Manufacturers' Association (NEMA) began including energy efficiency labeling requirements in its major stand MG-1. The efficiencies were based upon the Institute of Electrical...

Elliott, R. N.

279

Delaware's Energy Efficiency Potential and Program Scenarios to Meet Its Energy Efficiency Resource Standard  

E-Print Network [OSTI]

, state, federal and international agencies and nonprofit organizations. The Center is composed and development, environmental justice, conservation and renewable energy options, integrated resource planningDelaware's Energy Efficiency Potential and Program Scenarios to Meet Its Energy Efficiency Resource

Delaware, University of

280

Standard Energy Efficiency Database Platform - 2013 BTO Peer Review |  

Energy Savers [EERE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of Inspector GeneralDepartment of Energyof the AmericasDOE-STD-3020-2005 DecemberSpurringStandardDepartment of

Note: This page contains sample records for the topic "appliance efficiency standards" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Environmental assessment for proposed energy conservation standards for refrigerators, refrigerator-freezers, and freezers  

SciTech Connect (OSTI)

This Environmental Assessment (EA) on the candidate energy conservation standards for refrigerators, refrigerator-freezers, and freezers was prepared pursuant to the National Environmental Policy Act of 1969 (NEPA), regulations of the Council on Environmental Quality, Title 40, Code of Federal Regulations, Parts 1500 through 1508. The proposed energy conservation standard (Level 1) and the alternative standards are being reviewed in an energy-efficiency standards rulemaking that the Department has undertaken pursuant to the Energy Policy and Conservation Act, as amended by the National Energy Conservation Policy Act and the National Appliance Energy Conservation Act. The EA presents the associated environmental impacts from four energy conservation standards for this type of household appliance. For purposes of this EA, each standard is an alternative action and is compared to what is expected to happen if no new standards for this type of product were finalized, i.e., the no action alternative. Of the four energy conservation standard levels considered, standard level 4 has the highest level of energy efficiency and the largest environmental impact. The proposed action implementing Standard Level 1 would have the least environmental impacts, through emission reductions, of the four alternatives. The description of the standards results from the appliance energy-efficiency analyses conducted for the rulemaking. The presentation of environmental impacts for each of the alternatives appears at Section 3 of the EA.

NONE

1996-01-01T23:59:59.000Z

282

Questar Gas- Residential Energy Efficiency Rebate Programs  

Broader source: Energy.gov [DOE]

Questar Gas provides rebates for residential customers who make their homes more energy efficient by installing certain energy saving appliances, efficient heating equipment, and certain...

283

Energy Efficiency Program for Residential Products: Energy Conservation Standards for Residential Dishwashers, Reopening of the Comment Period  

Broader source: Energy.gov [DOE]

Energy Efficiency Program for Residential Products: Energy Conservation Standards for Residential Dishwashers, Reopening of the Comment Period

284

California Appliance Efficiency Regulations for Manufacturers  

E-Print Network [OSTI]

· Externalpowersupplies · Refrigerators,refrigerator-freezers, andfreezers · Televisions,andconsumeraudio and video

285

Citizens Gas- Residential Efficiency Rebates  

Broader source: Energy.gov [DOE]

Citizens Gas of Indiana offers rebates to its residential customers for the installation of several types of efficient natural gas appliances. Rebates are generally available for residential homes...

286

Unitil- Residential Energy Efficiency Programs  

Broader source: Energy.gov [DOE]

Unitil offers New Hampshire residential customers a number of programs to encourage more energy efficient homes. The Energy Star Appliance Program provides rebates for clothes washers, air...

287

ASRAC Regional Standards Enforcement Notice of Open Meeting  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Part 460 Appliance Standards and Rulemaking Federal Advisory Committee (ASRAC) - Central Air Conditioner Regional Enforcement Standards Working Group AGENCY: Department of Energy,...

288

Retrospective Evaluation of Appliance Price Trends  

E-Print Network [OSTI]

the higher the product cost and retail price. Table 3.change and appliance price Room air conditioners Small (price data to clarify price

Dale, Larry

2010-01-01T23:59:59.000Z

289

Smart Domestic Appliances Provide Flexibility for Sustainable...  

Open Energy Info (EERE)

benefits and difficulties associated with smart grid appliances. The presenter discusses demand response and load management and how users of smart grid can benefit renewable...

290

Appliance remanufacturing and life cycle energy and economic savings  

E-Print Network [OSTI]

In this paper we evaluate the energy and economic consequences of appliance remanufacturing relative to purchasing new. The appliances presented in this report constitute major residential appliances: refrigerator, dishwasher, ...

Boustani, Avid

291

Southeast Colorado Power Association- Energy Efficiency Rebate Program  

Broader source: Energy.gov [DOE]

Southeast Colorado Power Association (SECPA) offers a variety of rebates to customers who purchase and install energy efficient [http://secpa.com/Sites/Appliances.html appliances], [http://secpa...

292

EA-1872: Energy Efficiency and Sustainable Design Standards for New Federal Buildings  

Broader source: Energy.gov [DOE]

This EA evaluated the environmental impacts of a proposal to amend the current rule for commercial and high-rise multi-family residential buildings, 10 CFR 433 “Energy Efficiency Standards for New Federal Commercial and High-Rise Multi-Family Residential Buildings,” to replace ASHRAE Standard 90.1-2004 with the more stringent ASHRAE Standard 90.1-2007, incorporated by reference. This EA also evaluated the environmental impacts with regard to low-rise residential buildings; this rulemaking updated 10 CFR 435 Subpart A, “Energy Efficiency Standards for New Federal Residential Low-Rise Residential Buildings,” to replace the International Energy Conservation Code (IECC) 2004 with the more stringent IECC 2009, incorporated by reference. This EA was completed as DOE/EA-1871.

293

ENERGY EFFICIENT LAUNDRY PROCESS  

SciTech Connect (OSTI)

With the rising cost of energy and increased concerns for pollution and greenhouse gas emissions from power generation, increased focus is being put on energy efficiency. This study looks at several approaches to reducing energy consumption in clothes care appliances by considering the appliances and laundry chemistry as a system, rather than individually.

Tim Richter

2005-04-01T23:59:59.000Z

294

Thinking Globally: How ISO 50001 - Energy Management can make industrial energy efficiency standard practice  

SciTech Connect (OSTI)

Industry utilizes very complex systems, consisting of equipment and their human interface, which are organized to meet the production needs of the business. Effective and sustainable energy efficiency programs in an industrial setting require a systems approach to optimize the integrated whole while meeting primary business requirements. Companies that treat energy as a manageable resource and integrate their energy program into their management practices have an organizational context to continually seek opportunities for optimizing their energy use. The purpose of an energy management system standard is to provide guidance for industrial and commercial facilities to integrate energy efficiency into their management practices, including fine-tuning production processes and improving the energy efficiency of industrial systems. The International Organization for Standardization (ISO) has identified energy management as one of its top five priorities for standards development. The new ISO 50001 will establish an international framework for industrial, commercial, or institutional facilities, or entire companies, to manage their energy, including procurement and use. This standard is expected to achieve major, long-term increases in energy efficiency (20percent or more) in industrial, commercial, and institutional facilities and to reduce greenhouse gas (GHG) emissions worldwide.This paper describes the impetus for the international standard, its purpose, scope and significance, and development progress to date. A comparative overview of existing energy management standards is provided, as well as a discussion of capacity-building needs for skilled individuals to assist organizations in adopting the standard. Finally, opportunities and challenges are presented for implementing ISO 50001 in emerging economies and developing countries.

McKane, Aimee; Desai, Deann; Matteini, Marco; Meffert, William; Williams, Robert; Risser, Roland

2009-08-01T23:59:59.000Z

295

Cedar Falls Utilities- Residential Energy Efficiency Rebate Program  

Broader source: Energy.gov [DOE]

The Cedar Falls Utilities (CFU) Energy Efficiency Rebate Program provides rebates for energy efficient heating and cooling equipment, thermal envelope improvements and appliance recycling. The...

296

Lodi Electric Utility- Residential Energy Efficiency Rebate Program  

Broader source: Energy.gov [DOE]

Lodi Electric Utility (LEU) offers several residential energy efficiency programs, including the Appliance Rebate Program and the Home Improvement Rebate Program. Through the Energy Efficient Home...

297

Puget Sound Energy- Residential Energy Efficiency Rebate Programs  

Broader source: Energy.gov [DOE]

Puget Sound Energy's (PSE) Residential Energy Efficiency Rebate Programs offer a variety of incentives for customers who purchase energy efficient appliances and equipment. Rebates include furnaces...

298

Delta-Montrose Electric Association- Residential Energy Efficiency Rebate Program  

Broader source: Energy.gov [DOE]

Delta-Montrose Electric Association (DMEA) offers a variety of rebates for customers who buy energy efficient appliances and equipment. Rebates are available for energy efficient electric water...

299

Progress toward Producing Demand-Response-Ready Appliances  

SciTech Connect (OSTI)

This report summarizes several historical and ongoing efforts to make small electrical demand-side devices like home appliances more responsive to the dynamic needs of electric power grids. Whereas the utility community often reserves the word demand response for infrequent 2 to 6 hour curtailments that reduce total electrical system peak load, other beneficial responses and ancillary services that may be provided by responsive electrical demand are of interest. Historically, demand responses from the demand side have been obtained by applying external, retrofitted, controlled switches to existing electrical demand. This report is directed instead toward those manufactured products, including appliances, that are able to provide demand responses as soon as they are purchased and that require few, or no, after-market modifications to make them responsive to needs of power grids. Efforts to be summarized include Open Automated Demand Response, the Association of Home Appliance Manufacturer standard CHA 1, a simple interface being developed by the U-SNAP Alliance, various emerging autonomous responses, and the recent PinBus interface that was developed at Pacific Northwest National Laboratory.

Hammerstrom, Donald J.; Sastry, Chellury

2009-12-01T23:59:59.000Z

300

China Cools with Tighter RAC Standards  

SciTech Connect (OSTI)

After boiling summer brought brown-out to most part of the country in 2004, China announced a new set of minimum energy efficiency standards for room air conditioners in September 2004, with the first tier going into effect on March 1, 2005 and the reach standard taking effect on January 1, 2009. This represents a milestone in China's standard setting process since the reach standard levels are significantly more stringent than previous standards for other appliances. This paper first analyzes cost-effectiveness of China's new standards for room air conditioners, and then attempts to evaluate the impact of the new standards on energy savings, electric generation capacity, and CO2 emissions reductions.

Lin, Jiang; Rosenquist, Gregory

2006-06-01T23:59:59.000Z

Note: This page contains sample records for the topic "appliance efficiency standards" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Optimization of induction motor efficiency. Volume 3. Experimental comparison of three-phase standard motors with Wanlass motors. Final report  

SciTech Connect (OSTI)

Researchers conducted comprehensive laboratory tests to evaluate the effectiveness of the Wanlass connection in improving motor efficiency. On the basis of these tests, they found no reason to conclude that such a connection is more efficient than the standard connection.

Fuchs, E.F.

1985-12-01T23:59:59.000Z

302

Persistence of Energy Efficiency Behaviors over Time: Evidence from a Community-Based Program  

E-Print Network [OSTI]

Ways to Save Use energy- efficient lighting and appliances.natural lighting. Use an energy- efficient water heater andoff electronics, installing energy efficient lights, using

Whitsett, Donna D PhD; Justus, Hannah C; Steiner, Ellen; Duffy, Kevin

2013-01-01T23:59:59.000Z

303

Comparison of the Energy Efficiency Prescribed by ASHRAE/ANSI/IESNA Standard 90.1-1999 and ASHRAE/ANSI/IESNA Standard 90.1-2004  

SciTech Connect (OSTI)

This document presents the qualitative comparison of DOE’s formal determination of energy savings of ANSI/ASHRAE/IESNA Standard 90.1-2004. The term “qualitative” is used in the sense of identifying whether or not changes have a positive, negative, or neutral impact on energy efficiency of the standard, with no attempt made to quantify that impact. A companion document will present the quantitative comparison of DOE’s determination. The quantitative comparison will be based on whole building simulation of selected building prototypes in selected climates. This document presents a comparison of the energy efficiency requirements in ANSI/ASHRAE/IESNA 90.1-1999 (herein referred to as Standard 90.1-1999) and ANSI/ASHRAE/IESNA 90.1-2004 (herein referred to as Standard 90.1-2004). The comparison was done through a thorough review of all addenda to Standard 90.1-1999 that were included in the published ANSI/ASHRAE/IESNA Standard 90.1-2001 (herein referred to as Standard 90.1-2001) and also all addenda to Standard 90.1-2001 that were included in the published Standard 90.1-2004. A summary table showing the impact of each addendum is provided. Each addendum to both Standards 90.1-1999 and 90.1-2001 was evaluated as to its impact on the energy efficiency requirements of the standard (greater efficiency, lesser efficiency) and as to significance. The final section of this document summarizes the impacts of the various addenda and proposes which addenda should be included in the companion quantitative portion of DOE’s determination. Addenda are referred to with the nomenclature addendum 90.1-xxz, where “xx” is either “99” for 1999 or “01” for 2001, and z is the ASHRAE letter designation for the addendum. Addenda names are shown in bold face in text. DOE has chosen not to prepare a separate evaluation of Standard 90.1-2001 as that standard does not appear to improve energy efficiency in commercial buildings. What this means for the determination of energy savings for Standard 90.1-2004 is that the baseline standard for comparison is Standard 90.1-1999 and all addenda to both Standards 90.1-1999 and 90.1-2001 must be considered to determine the overall change in efficiency between Standard 90.1-1999 and Standard 90.1-2004.

Halverson, Mark A.; Liu, Bing; Richman, Eric E.; Winiarski, David W.

2006-12-01T23:59:59.000Z

304

CPS Energy- Residential Energy Efficiency Rebate Program  

Broader source: Energy.gov [DOE]

CPS Energy offers a variety of rebates for energy efficiency related improvements to residential homes, including: appliances, HVAC equipment, insulation, and equipment recycling.. Rebate...

305

PRELIMINARY TECHNICAL SUPPORT ENERGY EFFICIENCY PROGRAM  

E-Print Network [OSTI]

......................................................................ES-4 ES.3.1 Market and Technology Assessment Office of Energy Efficiency and Renewable Energy Building Technologies Program Appliances and Commercial

306

South River EMC- Energy Efficient Rebate Program  

Broader source: Energy.gov [DOE]

South River EMC offers a variety of rebates encouragings its members to invest in energy efficient appliances, equipment, and home upgrades. Incentives are available for clothes washers,...

307

OTEC- Residential Energy Efficiency Rebate Program  

Broader source: Energy.gov [DOE]

Oregon Trail Electric Cooperative (OTEC) assists residential members in reducing electric consumption by providing rebates for energy efficient equipment. Rebates are for appliances, heat pumps,...

308

Questar Gas- Residential Energy Efficiency Rebate Programs  

Broader source: Energy.gov [DOE]

Questar Gas provides rebates for energy efficient appliances and heating equipment, and certain weatherization measures through the ThermWise program. This equipment includes clothes washers,...

309

Impact of Natural Gas Appliances on Pollutant Levels in California Homes  

E-Print Network [OSTI]

35): 5661-67. Impact of Natural Gas Appliances on PollutantO-. ! Natural Gas Appliances on PollutantA! =? >7! =::! Impact of Natural Gas Appliances on Pollutant

Mullen, Nasim A.

2014-01-01T23:59:59.000Z

310

Equator Appliance: ENERGY STAR Referral (EZ 3720)  

Broader source: Energy.gov [DOE]

DOE referred Equator Appliance clothes washer EZ 3720 to EPA, brand manager of the ENERGY STAR program, for appropriate action after DOE testing revealed that the model does not meet ENERGY STAR requirements.

311

Material World: Forecasting Household Appliance Ownership in a Growing Global Economy  

SciTech Connect (OSTI)

Over the past years the Lawrence Berkeley National Laboratory (LBNL) has developed an econometric model that predicts appliance ownership at the household level based on macroeconomic variables such as household income (corrected for purchase power parity), electrification, urbanization and climate variables. Hundreds of data points from around the world were collected in order to understand trends in acquisition of new appliances by households, especially in developing countries. The appliances covered by this model are refrigerators, lighting fixtures, air conditioners, washing machines and televisions. The approach followed allows the modeler to construct a bottom-up analysis based at the end use and the household level. It captures the appliance uptake and the saturation effect which will affect the energy demand growth in the residential sector. With this approach, the modeler can also account for stock changes in technology and efficiency as a function of time. This serves two important functions with regard to evaluation of the impact of energy efficiency policies. First, it provides insight into which end uses will be responsible for the largest share of demand growth, and therefore should be policy priorities. Second, it provides a characterization of the rate at which policies affecting new equipment penetrate the appliance stock. Over the past 3 years, this method has been used to support the development of energy demand forecasts at the country, region or global level.

Letschert, Virginie; McNeil, Michael A.

2009-03-23T23:59:59.000Z

312

Non-intrusive appliance monitor apparatus  

DOE Patents [OSTI]

A non-intrusive monitor of energy consumption of residential appliances is described in which sensors, coupled to the power circuits entering a residence, supply analog voltage and current signals which are converted to digital format and processed to detect changes in certain residential load parameters, i.e., admittance. Cluster analysis techniques are employed to group change measurements into certain categories, and logic is applied to identify individual appliances and the energy consumed by each. 9 figs.

Hart, G.W.; Kern, E.C. Jr.; Schweppe, F.C.

1989-08-15T23:59:59.000Z

313

Non-intrusive appliance monitor apparatus  

DOE Patents [OSTI]

A non-intrusive monitor of energy consumption of residential appliances is described in which sensors, coupled to the power circuits entering a residence, supply analog voltage and current signals which are converted to digital format and processed to detect changes in certain residential load parameters, i.e., admittance. Cluster analysis techniques are employed to group change measurements into certain categories, and logic is applied to identify individual appliances and the energy consumed by each.

Hart, George W. (Natick, MA); Kern, Jr., Edward C. (Lincoln, MA); Schweppe, Fred C. (Carlisle, MA)

1989-08-15T23:59:59.000Z

314

Buildings Energy Data Book: 7.6 Efficiency Standards for Lighting  

Buildings Energy Data Book [EERE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: Alternative Fuels Data CenterEnergyAuthorization for(EV) Road UserNatural1 Efficiency Standards

315

Energy-efficiency standards for homes have the potential to reduce energy consumption and peak electrical demand.  

E-Print Network [OSTI]

The Issue Energy-efficiency standards for homes have the potential to reduce energy consumption HVAC system efficiency, including problems with airflows, refrigerant system components, and ductwork standards, but little data is available on the actu- al energy performance of new homes. The Solution

316

New energy test procedures for refrigerators and other appliances  

SciTech Connect (OSTI)

Many innovations in refrigerator design rely on microprocessors, sensors, and algorithms to control automatic defrost, variable speed,and other features. Even though these features strongly influence energy consumption, the major energy test procedures presently test only a refrigerator's mechanical efficiency and ignore the ''software'' aspects. We describe a new test procedure where both ''hardware'' and ''software'' tests are fed into a dynamic simulation model. A wide range of conditions can be tested and simulated. This approach promotes international harmonization because the simulation model can also be programmed to estimate energy use for the ISO, DOE, or JIS test. The approach outlined for refrigerators can also be applied to other appliances.

Meier, Alan; Ernebrant, Stefan; Kawamoto, Kaoru; Wihlborg, Mats

1999-04-01T23:59:59.000Z

317

The Benefits of Creating a Cross-Country Data Framework for Energy Efficiency  

SciTech Connect (OSTI)

As manufacturers now sell a similar range of consumer electronics and home appliances to major markets around the world, the task of identifying a product?s energy efficiency rating has usually been the responsibility of each country and its respective government agency. This has led to a multitude of energy efficiency testing procedures, ratings, and certifications, resulting in disparate data being captured on identical products. Furthermore, lack of consistent product identification criteria means product energy performance is not easily connected to relevant information about the product such as market availability, price or real world energy consumption. This paper presents a new data standard for reporting energy performance and related product information that can be adopted internationally. To inform the development of this standard, we explore the existing energy efficiency market data for the two example products of TVs and Room Air Conditioners. This paper discusses current/future use cases of appliance level energy efficiency data across all stakeholders, including consumers, retailers/manufacturers, global standards organizations, third party service providers, and regulatory agencies. It also explains the key benefits of moving to a common international data framework for energy efficiency, such as: 1) a centralized product information repository for comparing energy use, ratings/certifications, and pricing data 2) improved access to relevant consumer electronics and appliance data to facilitate new policy development and harmonization across markets 3) enablement of retailers and other third parties to embed actionable energy efficiency information as part of the consumer experience.

Katzman, Alex; McNeil, Michael; Pantano, Stephen

2013-09-11T23:59:59.000Z

318

Benefits of creating a cross-country data framework for energy efficiency  

SciTech Connect (OSTI)

As manufacturers now sell a similar range of consumer electronics and home appliances to major markets around the world, the task of identifying a product’s energy efficiency rating has usually been the responsibility of each country and its respective government agency. This has led to a multitude of energy efficiency testing procedures, ratings, and certifications, resulting in disparate data being captured on identical products. Furthermore, lack of consistent product identification criteria means product energy performance is not easily connected to relevant information about the product such as market availability, price or real world energy consumption. This paper presents a new data standard for reporting energy performance and related product information that can be adopted internationally. To inform the development of this standard, we explore the existing energy efficiency market data for the two example products of TVs and Room Air Conditioners. This paper discusses current/future use cases of appliance level energy efficiency data across all stakeholders, including consumers, retailers/manufacturers, global standards organizations, third party service providers, and regulatory agencies. It also explains the key benefits of moving to a common international data framework for energy efficiency, such as: 1) a centralized product information repository for comparing energy use, ratings/certifications, and pricing data 2) improved access to relevant consumer electronics and appliance data to facilitate new policy development and harmonization across markets 3) enablement of retailers and other third parties to embed actionable energy efficiency information as part of the consumer experience.

Katzman, Alex [SEAD Energy Efficiency Data Access Project, Enervee (United States)] [SEAD Energy Efficiency Data Access Project, Enervee (United States); McNeil, Michael [Lawrence Berkeley National Lab., CA (United States)] [Lawrence Berkeley National Lab., CA (United States); Pantano, Stephen [Collaborative Labeling and Appliance Standards Program (United States)] [Collaborative Labeling and Appliance Standards Program (United States)

2013-10-15T23:59:59.000Z

319

Analysis of Potential Energy Saving and CO2 Emission Reduction of Home Appliances and Commercial Equipments in China  

E-Print Network [OSTI]

appliances (excluding motors, transformers, and air compressors)appliances (excluding motors, transformers, and air compressors)

Zhou, Nan

2010-01-01T23:59:59.000Z

320

Analysis of Potential Energy Saving and CO2 Emission Reduction of Home Appliances and Commercial Equipments in China  

E-Print Network [OSTI]

appliances (excluding motors, transformers, and air compressors)appliances (excluding motors, transformers, and air compressors)

Zhou, Nan

2011-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "appliance efficiency standards" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

TV Energy Consumption Trends and Energy-Efficiency Improvement Options  

SciTech Connect (OSTI)

The SEAD initiative aims to transform the global market by increasing the penetration of highly efficient equipment and appliances. SEAD is a government initiative whose activities and projects engage the private sector to realize the large global energy savings potential from improved appliance and equipment efficiency. SEAD seeks to enable high-level global action by informing the Clean Energy Ministerial dialogue as one of the initiatives in the Global Energy Efficiency Challenge. In keeping with its goal of achieving global energy savings through efficiency, SEAD was approved as a task within the International Partnership for Energy Efficiency Cooperation (IPEEC) in January 2010. SEAD partners work together in voluntary activities to: (1) ?raise the efficiency ceiling? by pulling super-efficient appliances and equipment into the market through cooperation on measures like incentives, procurement, awards, and research and development (R&D) investments; (2) ?raise the efficiency floor? by working together to bolster national or regional policies like minimum efficiency standards; and (3) ?strengthen the efficiency foundations? of programs by coordinating technical work to support these activities. Although not all SEAD partners may decide to participate in every SEAD activity, SEAD partners have agreed to engage actively in their particular areas of interest through commitment of financing, staff, consultant experts, and other resources. In addition, all SEAD partners are committed to share information, e.g., on implementation schedules for and the technical detail of minimum efficiency standards and other efficiency programs. Information collected and created through SEAD activities will be shared among all SEAD partners and, to the extent appropriate, with the global public.As of April 2011, the governments participating in SEAD are: Australia, Brazil, Canada, the European Commission, France, Germany, India, Japan, Korea, Mexico, Russia, South Africa, Sweden, the United Arab Emirates, the United Kingdom, and the United States. More information on SEAD is available from its website at http://www.superefficient.org/.

Park, Won Young; Phadke, Amol; Shah, Nihar; Letschert, Virginie

2011-07-01T23:59:59.000Z

322

Implications of maximizing China's technical potential for residential end-use energy efficiency: A 2030 outlook from the bottom-up  

E-Print Network [OSTI]

5 4. Efficiency Improvement and Technology5 4.1. Appliance Technology7 4.2. Residential Heating Technology

Khanna, Nina

2014-01-01T23:59:59.000Z

323

Analysis of Minimum Efficiency Performance Standards for Residential General Service Lighting in Chile  

SciTech Connect (OSTI)

Minimum Efficiency Performance Standards (MEPS) have been chosen as part of Chile's national energy efficiency action plan. As a first MEPS, the Ministry of Energy has decided to focus on a regulation for lighting that would ban the sale of inefficient bulbs, effectively phasing out the use of incandescent lamps. Following major economies such as the US (EISA, 2007) , the EU (Ecodesign, 2009) and Australia (AS/NZS, 2008) who planned a phase out based on minimum efficacy requirements, the Ministry of Energy has undertaken the impact analysis of a MEPS on the residential lighting sector. Fundacion Chile (FC) and Lawrence Berkeley National Laboratory (LBNL) collaborated with the Ministry of Energy and the National Energy Efficiency Program (Programa Pais de Eficiencia Energetica, or PPEE) in order to produce a techno-economic analysis of this future policy measure. LBNL has developed for CLASP (CLASP, 2007) a spreadsheet tool called the Policy Analysis Modeling System (PAMS) that allows for evaluation of costs and benefits at the consumer level but also a wide range of impacts at the national level, such as energy savings, net present value of savings, greenhouse gas (CO2) emission reductions and avoided capacity generation due to a specific policy. Because historically Chile has followed European schemes in energy efficiency programs (test procedures, labelling program definitions), we take the Ecodesign commission regulation No 244/2009 as a starting point when defining our phase out program, which means a tiered phase out based on minimum efficacy per lumen category. The following data were collected in order to perform the techno-economic analysis: (1) Retail prices, efficiency and wattage category in the current market, (2) Usage data (hours of lamp use per day), and (3) Stock data, penetration of efficient lamps in the market. Using these data, PAMS calculates the costs and benefits of efficiency standards from two distinct but related perspectives: (1) The Life-Cycle Cost (LCC) calculation examines costs and benefits from the perspective of the individual household; and (2) The National Perspective projects the total national costs and benefits including both financial benefits, and energy savings and environmental benefits. The national perspective calculations are called the National Energy Savings (NES) and the Net Present Value (NPV) calculations. PAMS also calculate total emission mitigation and avoided generation capacity. This paper describes the data and methodology used in PAMS and presents the results of the proposed phase out of incandescent bulbs in Chile.

Letschert, Virginie E.; McNeil, Michael A.; Leiva Ibanez, Francisco Humberto; Ruiz, Ana Maria; Pavon, Mariana; Hall, Stephen

2011-06-01T23:59:59.000Z

324

Fort Collins Utilities- Residential and Small Commercial Appliance Rebate Program  

Broader source: Energy.gov [DOE]

Fort Collins Utilities offers a number of appliance and recycling rebates to residential and small commercial customers. The appliance rebate program offers a $50 rebate for Energy Star rated...

325

Microwave vs. Electric Kettle: Which Appliance Is in Hot Water...  

Energy Savers [EERE]

Microwave vs. Electric Kettle: Which Appliance Is in Hot Water in EnergyFaceoff Round 4? Microwave vs. Electric Kettle: Which Appliance Is in Hot Water in EnergyFaceoff Round 4?...

326

Reading Municipal Light Department- Residential ENERGY STAR Appliance Rebate Program  

Broader source: Energy.gov [DOE]

Reading Municipal Light Department (RMLD) offers rebates to residential customers who install Energy Star appliances in eligible homes. The offer is limited to one rebate per appliance or a maximum...

327

Buildings Energy Data Book: 7.6 Efficiency Standards for Lighting  

Buildings Energy Data Book [EERE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: Alternative Fuels Data CenterEnergyAuthorization for(EV) Road UserNatural1 Efficiency Standards2

328

Buildings Energy Data Book: 7.6 Efficiency Standards for Lighting  

Buildings Energy Data Book [EERE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: Alternative Fuels Data CenterEnergyAuthorization for(EV) Road UserNatural1 Efficiency Standards23

329

Buildings Energy Data Book: 7.6 Efficiency Standards for Lighting  

Buildings Energy Data Book [EERE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: Alternative Fuels Data CenterEnergyAuthorization for(EV) Road UserNatural1 Efficiency Standards234

330

Use of Residential Smart Appliances for Peak-Load Shifting and Spinning Reserves Cost/Benefit Analysis  

SciTech Connect (OSTI)

In this report, we present the results of an analytical cost/benefit study of residential smart appliances from a utility/grid perspective in support of a joint stakeholder petition to the ENERGY STAR program within the Environmental Protection Agency (EPA) and Department of Energy (DOE). The goal of the petition is in part to provide appliance manufacturers incentives to hasten the production of smart appliances. The underlying hypothesis is that smart appliances can play a critical role in addressing some of the societal challenges, such as anthropogenic global warming, associated with increased electricity demand, and facilitate increased penetration of renewable sources of power. The appliances we consider include refrigerator/freezers, clothes washers, clothes dryers, room air-conditioners, and dishwashers. The petition requests the recognition that providing an appliance with smart grid capability, i.e., products that meet the definition of a smart appliance, is at least equivalent to a corresponding five percent in operational machine efficiencies. It is then expected that given sufficient incentives and value propositions, and suitable automation capabilities built into smart appliances, residential consumers will be adopting these smart appliances and will be willing participants in addressing the aforementioned societal challenges by more effectively managing their home electricity consumption. The analytical model we utilize in our cost/benefit analysis consists of a set of user-definable assumptions such as the definition of on-peak (hours of day, days of week, months of year), the expected percentage of normal consumer electricity consumption (also referred to as appliance loads) that can shifted from peak hours to off-peak hours, the average power rating of each appliance, etc. Based on these assumptions, we then formulate what the wholesale grid operating-cost savings, or benefits, would be if the smart capabilities of appliances were invoked, and some percentage of appliance loads were shifted away from peak hours to run during off-peak hours, and appliance loads served power-system balancing needs such as spinning reserves that would otherwise have to be provided by generators. The rationale is that appliance loads can be curtailed for about ten minutes or less in response to a grid contingency without any diminution in the quality of service to the consumer. We then estimate the wholesale grid operating-cost savings based on historical wholesale-market clearing prices (location marginal and spinning reserve) from major wholesale power markets in the United States. The savings derived from the smart grid capabilities of an appliance are then compared to the savings derived from a five percent increase in traditional operational machine efficiencies, referred to as cost in this report, to determine whether the savings in grid operating costs (benefits) are at least as high as or higher than the operational machine efficiency credit (cost).

Sastry, Chellury; Pratt, Robert G.; Srivastava, Viraj; Li, Shun

2010-12-01T23:59:59.000Z

331

Estimate of Technical Potential for Minimum Efficiency Performance Standards in 13 Major World Economies  

E-Print Network [OSTI]

achievable energy-efficient designs, based on emergingachievable energy- efficient designs, based on efficientdesign that achieves high energy efficiency by combining the most efficient

Letschert, Virginie

2013-01-01T23:59:59.000Z

332

White Paper on Energy Efficiency Status of Energy-Using Products in China (2011)  

E-Print Network [OSTI]

rural area household appliances subsidy program” and “energyof the “energy efficient products discount program,” “ruralas “energy efficient products discount program”, “rural area

Zhou, Nan

2013-01-01T23:59:59.000Z

333

Comparison of Test Procedures and Energy Efficiency Criteria in Selected International Standards and Labeling Programs for Clothes Washers, Water Dispensers, Vending Machines and CFLs  

E-Print Network [OSTI]

Appliance Manufacturers (AHAM), and Japan’s own JIS C 9606The U.S. test procedure (AHAM HWL-1) does not include a washAppliance Manufacturers (AHAM) HWL-1 Cold Water: 60 ± 5?F (

Fridley, David

2010-01-01T23:59:59.000Z

334

Market and behavioral barriers to energy efficiency: A preliminary evaluation of the case for tariff financing in California  

SciTech Connect (OSTI)

Consumers regularly forgo purchases of high efficiency appliances that appear to be cost effective at a reasonable rate of return. While some argue that this is a true revelation of preferences for appliance features, this 'efficiency gap' can be largely explained by a combination of market and behavioral failures that reduce consumers ability to evaluate the relative value of appliances and skew preferences toward initial cost savings, undervaluing future reductions in operating costs. These failures and barriers include externalities of energy use, imperfect competition between manufacturers, asymmetric information, bounded rationality, split incentives, and transaction costs (Golove 1996). Recognizing the social benefit of energy conservation, several major methods are used by policymakers to ensure that efficient appliances are purchased: minimum efficiency standards, Energy Star labeling, and rebates and tax credits. There is no single market for energy services; there are hundreds of uses, thousands of intermediaries, and millions of users, and likewise, no single appropriate government intervention (Golove 1996). Complementary approaches must be implemented, considering policy and institutional limitations. In this paper, I first lay out the rationale for government intervention by addressing the market and behavioral failures and barriers that arise in the context of residential energy efficiency. I then consider the ways in which some of these failures and barriers are addressed through major federal programs and state and utility level programs that leverage them, as well as identifying barriers that are not addressed by currently implemented programs. Heterogeneity of consumers, lack of financing options, and split incentives of landlords and tenants contribute significantly to the under-adoption of efficient appliances. To quantify the size of the market most affected by these barriers, I estimate the number of appliances, and in particular the number of outdated appliances, in California rental housing. Appliances in rental housing are on average older than those in owner occupied housing. More importantly, a substantial proportion of very old appliances are in rental housing. Having established that a very old stock of appliances exists in California rental housing, I discuss tariff financing as a policy option to reduce the impact of the remaining market and behavioral barriers. In a tariff financing program, the utility pays the initial cost of an appliance, and is repaid through subsequent utility bills. By eliminating upfront costs, tying repayment to the gas or electric meter, requiring a detailed energy audit, and relying upon utility bill payment history rather than credit score in determining participant eligibility, tariff financing largely overcomes many barriers to energy efficiency. Using California as a case study, I evaluate the feasibility of implementing tariff financing. For water heaters in particular, this appears to be a cost-effective strategy. Tariff financing from utilities is particularly valuable because it improves the ability of low-income renters to lower their utility bills, without burdening landlords with unrecoverable capital costs. To implement tariff financing country-wide, regulations in many states defining private loan-making institutions or the allowable use of public benefit funds may need to be modified. Tariff financing is relatively new and in most locations is only available as a pilot program or has only recently exited pilot phase. This preliminary evaluation suggests that tariff financing is a valuable future addition to the toolkit of policymakers who aim to increase the diffusion of efficient appliances. While regulatory approval is necessary in states that wish to pursue tariff financing, at this point, the major barrier to further implementation appears to be the newness of the financing mechanism.

Fujita, K. Sydny

2011-06-23T23:59:59.000Z

335

GE Appliance Park Louisville, KY Plant Wide Assessment Final Report October 25th, 2007  

SciTech Connect (OSTI)

Used a team of experts to analyze and model major systems at a large industrial appliance manufacturer. During the data gathering stage, the team specifically looked for baselining the efficiency of the systems as well as developing short term and longer term efficiency projects. Electrical distribution, Compressed air generation and thermal heat recovery for the production facility and front office heating and cooling optimization were all baselined during the study.

Chandon Rao; Richard Urschel

2007-10-25T23:59:59.000Z

336

Hercules Municipal Utility- Residential Energy Efficiency Rebate Program  

Broader source: Energy.gov [DOE]

Hercules Municipal Utility provides financial incentives for its residential members to increase the energy efficiency of participating homes. Rebates are offered for a variety of home appliances...

337

Anoka Municipal Utility- Residential Energy Efficiency Rebate Program  

Broader source: Energy.gov [DOE]

Anoka Municipal Utilities (AMU) offers incentives for residential customers to install energy-efficient appliances and light bulbs in eligible homes. Rebates are available for Energy Star qualified...

338

Mansfield Municipal Electric Department- Residential Energy Efficiency Rebate Program  

Broader source: Energy.gov [DOE]

Mansfield Municipal Electric Department encourages energy efficiency through the ENERGY STAR Appliance Rebate Incentive Program. Cash rebates are offered for ENERGY STAR central air conditioners,...

339

Empire District Electric- Residential Energy Efficiency Rebate Program (Arkansas)  

Broader source: Energy.gov [DOE]

Empire District Electric Company (EDEC) offers rebates to residential customers for energy audits, weatherization measures, central air conditioning systems, and energy efficient home appliances....

340

Lassen Municipal Utility District- Residential Energy Efficiency Rebate Program  

Broader source: Energy.gov [DOE]

Lassen Municipal Utility District (LMUD) offers an incentive for residential customers who purchase and install efficient lighting, HVAC equipment and ENERGY STAR rated appliances for eligible...

Note: This page contains sample records for the topic "appliance efficiency standards" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Vectren Energy Delivery of Indiana (Gas)- Residential Energy Efficiency Rebates  

Broader source: Energy.gov [DOE]

Vectren Energy Delivery offers its residential natural gas customers in Indiana rebates for the installation of certain high efficiency natural gas appliances and insulation measures. Rebates are...

342

Vectren Energy Delivery of Ohio (Gas)- Residential Energy Efficiency Rebates  

Broader source: Energy.gov [DOE]

Vectren Energy Delivery offers residential natural gas customers in Ohio rebates for the installation of certain high efficiency natural gas appliances and building insulation. Rebates are...

343

Plumas-Sierra REC- Residential Energy Efficiency Rebate Program  

Broader source: Energy.gov [DOE]

Plumas-Sierra Rural Electric Cooperative (PSREC) offers several financial incentives for residential customers to improve the efficiency of their homes by upgrading to energy saving appliances and...

344

Laclede Gas Company- Residential High Efficiency Heating Rebate Program  

Broader source: Energy.gov [DOE]

Laclede Gas Company offers various rebates to residential customers for investing in energy efficient equipment and appliances. Residential customers can qualify for rebates on boilers, furnaces,...

345

Kentucky Utilities Company- Residential Energy Efficiency Rebate Program (Kentucky)  

Broader source: Energy.gov [DOE]

Kentucky Utilities Company's Home Energy Rebate program provides incentives for residential customers to upgrade to energy efficiency home appliances and heat and air conditioning equipment. ...

346

Xcel Energy (Gas and Electric)- Residential Energy Efficiency Rebate Programs  

Broader source: Energy.gov [DOE]

In addition to home energy audits, Xcel Energy offers rebates to Minnesota residential customers for the purchase of energy efficient HVAC systems, insulation, appliances and lighting equipment....

347

White River Valley Electric Cooperative- Energy Efficiency Rebate Program  

Broader source: Energy.gov [DOE]

The residential and commercial appliance and heating rebate program encourages members to purchase Energy Star equipment that qualifies under the White River energy efficiency program. Items...

348

Black Hills Energy (Gas)- Residential Energy Efficiency Program  

Broader source: Energy.gov [DOE]

Black Hills Energy (BHE) offers a variety of rebates for residential Colorado customers who purchase and install energy efficient natural gas appliances, heating equipment and insulation materials....

349

Sangre De Cristo Electric Association- Energy Efficiency Credit Program  

Broader source: Energy.gov [DOE]

The Sangre De Cristo Electric Association (SDCEA) offers the Energy Efficiency Credit Program, a rebate program which offers incentives for space heaters, water heaters and appliances.

350

FirstEnergy (Potomac Edison)- Residential Energy Efficiency Rebate Program  

Broader source: Energy.gov [DOE]

FirstEnergy (Potomac Edison) offers incentives to Maryland residential customers who are interested in upgrading to more energy efficient appliances and HVAC systems. Rebates are available on...

351

Questar Gas- Residential Energy Efficiency Rebate Programs (Idaho)  

Broader source: Energy.gov [DOE]

Questar Gas provides rebates for energy efficient appliances and heating equipment, and certain weatherization measures through the ThermWise program. This equipment includes clothes washers, water...

352

Louisville Gas and Electric- Residential Energy Efficiency Rebate Program (Kentucky)  

Broader source: Energy.gov [DOE]

Louisville Gas and Electric's Home Energy Rebate program provides incentives for residential customers to upgrade to energy efficiency home appliances and heat and air conditioning equipment. ...

353

Independence Power and Light- Residential Energy Efficiency Rebate Program  

Broader source: Energy.gov [DOE]

Independence Power and Light (IPL) offers rebates to residential customers for purchasing new, energy efficient appliances. Rebates are available on central air conditioning systems, heat pumps,...

354

San Miguel Power Association- Energy Efficiency Rebate Program  

Broader source: Energy.gov [DOE]

San Miguel Power Association (SMPA) offers a variety of rebates to customers for the purchase and installation of energy efficient equipment and appliances. Both residential and commercial...

355

Form ElectApp11 ELECTRICAL APPLIANCES  

E-Print Network [OSTI]

Form ElectApp11 ELECTRICAL APPLIANCES In accordance with Residence Regulation 14.2 (see Section Two. Permission to bring personal electrical items will not be unreasonably withheld, but will not be granted amplifiers electrical heaters cooking equipment such as deep fat fryers. (Please note that permitted cooking

Applebaum, David

356

Form ElectApp13 ELECTRICAL APPLIANCES  

E-Print Network [OSTI]

Form ElectApp13 ELECTRICAL APPLIANCES In accordance with the Agreement Terms and Conditions clause to the Residence. Permission to bring personal electrical items will not be unreasonably withheld systems amplifiers electrical heaters cooking equipment such as deep fat fryers. (Please note

Applebaum, David

357

Form ElectApp12 ELECTRICAL APPLIANCES  

E-Print Network [OSTI]

Form ElectApp12 ELECTRICAL APPLIANCES In accordance with Residence Regulation 15.2 (see Section Two. Permission to bring personal electrical items will not be unreasonably withheld, but will not be granted · amplifiers · electrical heaters · cooking equipment such as deep fat fryers. (Please note that permitted

Applebaum, David

358

ISSUANCE 2015-02-03: Energy Efficiency Program for Residential Products: Energy Conservation Standards for Miscellaneous Refrigeration Products, Reopening of Public Comment Period  

Broader source: Energy.gov [DOE]

Energy Efficiency Program for Residential Products: Energy Conservation Standards for Miscellaneous Refrigeration Products, Reopening of Public Comment Period

359

In 1991 UC Irvine adopted standards to outperform California's Title 24 Energy Efficiency Standards by 30 percent, use 100 percent reclaimed water, CO2 sensing for  

E-Print Network [OSTI]

in Sacramento. · Nine buildings at UC Irvine bear the U.S. Green Building Council's Leadership in Energy· In 1991 UC Irvine adopted standards to outperform California's Title 24 Energy Efficiency, and no rainforest hardwoods · UC Irvine's Smart Labs Initiative, which reduces energy consumption in new

Rose, Michael R.

360

National Energy Efficiency Evaluation, Measurement and Verification (EM&V) Standard: Scoping Study of Issues and Implementation Requirements  

SciTech Connect (OSTI)

This report is a scoping study that identifies issues associated with developing a national evaluation, measurement and verification (EM&V) standard for end-use, non-transportation, energy efficiency activities. The objectives of this study are to identify the scope of such a standard and define EM&V requirements and issues that will need to be addressed in a standard. To explore these issues, we provide and discuss: (1) a set of definitions applicable to an EM&V standard; (2) a literature review of existing guidelines, standards, and 'initiatives' relating to EM&V standards as well as a review of 'bottom-up' versus 'top-down' evaluation approaches; (3) a summary of EM&V related provisions of two recent federal legislative proposals (Congressman Waxman's and Markey's American Clean Energy and Security Act of 2009 and Senator Bingaman's American Clean Energy Leadership Act of 2009) that include national efficiency resource requirements; (4) an annotated list of issues that that are likely to be central to, and need to be considered when, developing a national EM&V standard; and (5) a discussion of the implications of such issues. There are three primary reasons for developing a national efficiency EM&V standard. First, some policy makers, regulators and practitioners believe that a national standard would streamline EM&V implementation, reduce costs and complexity, and improve comparability of results across jurisdictions; although there are benefits associated with each jurisdiction setting its own EM&V requirements based on their specific portfolio and evaluation budgets and objectives. Secondly, if energy efficiency is determined by the US Environmental Protection Agency to be a Best Available Control Technology (BACT) for avoiding criteria pollutant and/or greenhouse gas emissions, then a standard can be required for documenting the emission reductions resulting from efficiency actions. The third reason for a national EM&V standard is that such a standard is likely to be required as a result of future federal energy legislation that includes end-use energy efficiency, either as a stand-alone energy-efficiency resource standard (EERS) or as part of a clean energy or renewable energy standard. This study is focused primarily on this third reason and thus explores issues associated with a national EM&V standard if energy efficiency is a qualifying resource in federal clean energy legislation. Developing a national EM&V standard is likely to be a lengthy process; this study focuses on the critical first step of identifying the issues that must be addressed in a future standard. Perhaps the most fundamental of these issues is 'how good is good enough?' This has always been the fundamental issue of EM&V for energy efficiency and is a result of the counter-factual nature of efficiency. Counter-factual in that savings are not measured, but estimated to varying degrees of accuracy by comparing energy consumption after a project (program) is implemented with what is assumed to have been the consumption of energy in the absence of the project (program). Therefore, the how good is good enough question is a short version of asking how certain does one have to be of the energy savings estimate that results from EM&V activities and is that level of certainty properly balanced against the amount of effort (resources, time, money) that is utilized to obtain that level of certainty. The implication is that not only should energy efficiency investments be cost-effective, but EM&V investments should consider risk management principles and thus also balance the costs and value of information derived from EM&V (EM&V should also be cost-effective).

Schiller Consulting, Inc.; Schiller, Steven R.; Goldman, Charles A.; Galawish, Elsia

2011-02-04T23:59:59.000Z

Note: This page contains sample records for the topic "appliance efficiency standards" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Technical support document: Energy conservation standards for consumer products: Refrigerators and furnaces including: environmental impacts regulatory impact analysis  

SciTech Connect (OSTI)

The National Appliance Energy Conversation Act (NAECA) of 1987 (P.L. 100-12) establishes energy efficiency standards for 13 types of consumer products. The legislation requires the Department of Energy (DOE) to consider new or amended standards on these and other types of products at specified times. DOE is currently selecting standards for two types of products: refrigerators, refrigerator-freezers, and freezers; and small gas furnaces. This Technical Support Document presents the methodology, data and results from the analysis of the energy and economic impacts of the proposed standards. 8 refs., 39 figs., 135 tabs.

Not Available

1989-11-01T23:59:59.000Z

362

Citizens Gas- Commercial Efficiency Rebates  

Broader source: Energy.gov [DOE]

Citizens Gas of Indiana offers rebates to commercial customers for the installation of several types of efficient natural gas appliances, as well as certain equipment upgrades and tune-up services....

363

DRAFT STAFF PAPER EFFICIENCY PROGRAMS  

E-Print Network [OSTI]

. Keywords: Efficiency, demand side management, naturally occurring savings, building and appliance ACTIVITIES INTO ENERGY COMMISSION DEMAND FORECASTS Chris Kavalec Don Schultz Demand Analysis Office. This uncertainty, along with other issues related to impact measurement, has been debated in recent Demand

364

Thinking Globally: How ISO 50001 - Energy Management can make industrial energy efficiency standard practice  

E-Print Network [OSTI]

The purpose of an energy management system standard is towww.iso.org/iso/energy_management_system_standard Relatedof an energy management system. For organizations already

McKane, Aimee

2010-01-01T23:59:59.000Z

365

Thinking Globally: How ISO 50001 - Energy Management can make industrial energy efficiency standard practice  

E-Print Network [OSTI]

Comparison of National Energy Management Standards, prepared2007, Industrial Energy Management: Issues Paper, preparedMeeting: Using Energy Management Standards to stimulate

McKane, Aimee

2010-01-01T23:59:59.000Z

366

Carrots and Sticks: A Comprehensive Business Model for the Successful Achievement of Energy Efficiency Resource Standards  

E-Print Network [OSTI]

energy efficiency business model on utility earnings EES w/energy efficiency business model on utility ROE EES w/RPCSticks: A Comprehensive Business Model for the Successful

Satchwell, Andrew

2013-01-01T23:59:59.000Z

367

An International Survey of Electric Storage Tank Water Heater Efficiency and Standards  

E-Print Network [OSTI]

Survey of Electric Storage Tank Water Heater Efficiency andSurvey of Electric Storage Tank Water Heater Efficiency andby electric resistance storage tank water heaters (geysers),

Johnson, Alissa

2013-01-01T23:59:59.000Z

368

Energy efficiency in the European union  

SciTech Connect (OSTI)

Encouraged by the European Union labeling scheme for energy-efficient appliances, manufacturers in Europe are bring out lines of more efficient products that showcase new technologies. This article provides an overview both to the history of energy efficient appliances in the EU and highlights of the Domotechnica 1997 marketing show, including details of major energy efficiency improvements in refrigerators, clothes washers, clothes dryers, freezers, and dishwashers. 2 figs.

Lebot, B.; Waide, P.

1998-01-01T23:59:59.000Z

369

Hydrophilic structures for condensation management in refrigerator appliances  

DOE Patents [OSTI]

A refrigerator appliance that includes a freezer compartment having a freezer compartment door, and a refrigeration compartment having at least one refrigeration compartment door. The appliance further includes a mullion with an exterior surface. The mullion divides the compartments and the exterior surface directs condensation toward a transfer point. The appliance may also include a cabinet that houses the compartments and has two sides, each with an exterior surface. Further, at least one exterior surface directs condensation toward a transfer point.

Kuehl, Steven John; Vonderhaar, John J; Wu, Guolian; Wu, Mianxue

2014-10-21T23:59:59.000Z

370

Distributional and Efficiency Impacts of Clean and Renewable Energy Standards for Electricity  

E-Print Network [OSTI]

We examine the efficiency and distributional impacts of greenhouse gas policies directed toward the electricity

Rausch, Sebastian

2012-07-17T23:59:59.000Z

371

T-588: HP Virtual SAN Appliance Stack Overflow  

Broader source: Energy.gov [DOE]

A vulnerability has been reported in HP StorageWorks P4000 Virtual SAN Appliance Software, which can be exploited by malicious people to compromise a vulnerable system.

372

Reminder: Personal Appliance Use at Jefferson Lab | Jefferson...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

The Lab provides refrigerators, microwave ovens, and coffee makers in common use space of buildings. Personal household appliances are not authorized. For your reference, a copy of...

373

Orange and Rockland Utilities (Electric)- Residential Appliance Recycling Program  

Broader source: Energy.gov [DOE]

Orange and Rockland Utilities provides rebates for residential customers for recycling older, inefficient refrigerators and freezers. All appliances must meet the program requirements listed on the...

374

Buying an Appliance this Holiday Season? ENERGY STAR Products...  

Office of Environmental Management (EM)

Freezers Room air conditioners Televisions Clothes washers Dishwashers Battery chargers Water heaters Fluorescent lamp ballasts Incandescent reflector lamps If your appliance has...

375

Making the Market Right for Environmentally Sound Energy-Efficient Technologies: U.S. Buildings Sector Successes that Might Work in Developing Countries and Eastern Europe  

E-Print Network [OSTI]

Energy Standards for Appliances, Equipment, and Buildings Golden Carrots: Motivating New Products that Beat the Standards Revenue-Neutral "Feebates" for Whole Buildings,

Gadgil, A.J.

2008-01-01T23:59:59.000Z

376

Measure Guideline: Combustion Safety for Natural Draft Appliances Through Appliance Zone Isolation  

SciTech Connect (OSTI)

This measure guideline covers how to assess and carry out the isolation of natural draft combustion appliances from the conditioned space of low-rise residential buildings. It deals with combustion appliances located either within the living space in enclosed closets or side rooms or outside the living space in an adjacent area like an attic or garage. This subset of houses does not require comprehensive combustion safety tests and simplified prescriptive procedures can be used to address safety concerns. This allows residential energy retrofit contractors inexperienced in advanced combustion safety testing to effectively address combustion safety issues and allow energy retrofits including tightening and changes to distribution and ventilation systems to proceed.

Fitzgerald, J.; Bohac, D.

2014-04-01T23:59:59.000Z

377

Modeling diffusion of electrical appliances in the residential sector  

E-Print Network [OSTI]

Efficiency Standards in the Residential Electricity Sector.France. USDOE (2001). Residential Energy Consumption Survey,long-term response of residential cooling energy demand to

McNeil, Michael A.

2010-01-01T23:59:59.000Z

378

EA-1926: Energy Efficiency Design Standards for New Federal Low-Rise Residential Buildings (RIN# 1904-AC61)  

Broader source: Energy.gov [DOE]

This EA will evaluate the potential environmental impacts of implementing the provisions in the Energy Conservation and Production Act (ECPA) that require DOE to update the baseline Federal energy efficiency performance standards for the construction of new Federal buildings, including low-rise residential buildings.

379

Energy Efficiency Standards and Labels in North America: Opportunities for Harmonization  

E-Print Network [OSTI]

and voluntary standards for dry-type transformers.MEPS for dry-type distribution transformers (effective

Wiel, Stephen

2008-01-01T23:59:59.000Z

380

E-Print Network 3.0 - activator appliances Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

of appliance operation to take advantage... be standalone or embedded either in the smart meter or in appliances. At the same time, customers may Source: Snyder, Larry -...

Note: This page contains sample records for the topic "appliance efficiency standards" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

U-247: EMC Cloud Tiering Appliance Flaw Lets Remote Users Bypass...  

Broader source: Energy.gov (indexed) [DOE]

7: EMC Cloud Tiering Appliance Flaw Lets Remote Users Bypass Authentication and Gain Administrative Access U-247: EMC Cloud Tiering Appliance Flaw Lets Remote Users Bypass...

382

E-Print Network 3.0 - appliance ownership survey Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Roomba Is Rambo": Intimate Home Appliances Ja-Young Sung, Lan Guo, Rebecca E. Grinter... psychology literature which emphasizes 12;"My Roomba Is Rambo": Intimate Home Appliances...

383

Predicting Backdrafting and Spillage for Natural-Draft Gas Combustion Appliances: Validating VENT-II  

E-Print Network [OSTI]

for Natural-Draft Gas Combustion Appliances: Validatingfor Natural-Draft Gas Combustion Appliances: A Validation ofs ability to predict combustion gas spillage events due to

Rapp, Vi H.

2014-01-01T23:59:59.000Z

384

Thinking Globally: How ISO 50001 - Energy Management can make industrial energy efficiency standard practice  

E-Print Network [OSTI]

organizational framework for industrial facilities to integrate energy efficiencyof energy efficiency. A first step once the organizational

McKane, Aimee

2010-01-01T23:59:59.000Z

385

Supplement to: March 1982 consumer products efficiency standards, engineering analysis and economic analysis documents  

SciTech Connect (OSTI)

The following product types are discussed: refrigerators and refrigerator freezers, freezers, furnaces and boilers, and central air conditioners. Some topics included are: hybrid evaporators, cost efficiency relationships, high-efficiency compressor substitution, pulsed combustion, all aluminium heat exchanger, and high-efficiency two-speed compressor.

Not Available

1983-07-01T23:59:59.000Z

386

DOE Announces Tougher Enforcement of Appliance Standards Reporting...  

Broader source: Energy.gov (indexed) [DOE]

energy and cost savings to the American public," said DOE General Counsel Scott Blake Harris. "This 30 day period will provide all manufacturers the same opportunity to submit...

387

Appliance Standards Program Schedule - CCE Overview and Update...  

Broader source: Energy.gov (indexed) [DOE]

Products and Commercial and Industrial Equipment-- AHRI Annual Meeting CCE Overview and Update Presenation, dated April 13, 2011 AHAM - CCE Overview and Update, dated 0607...

388

Appliance Standards Program - The FY 2003 Priority Setting Report...  

Energy Savers [EERE]

energy savings potential warranting further analysis. It also describes the derivation of energy consumption and saving estimates for those products fy03prioritysettingappa.pdf...

389

Secretary Chu Announces More Stringent Appliance Standards for...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

heaters, pool heaters and direct heating equipment such as gas fireplaces - will reduce air pollution, prevent the release of harmful nitrogen oxides and mercury, and avoid...

390

About the Appliance and Equipment Standards Program | Department of Energy  

Energy Savers [EERE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion |Energy UsageAUDITVehiclesTankless orA BRIEF HISTORY OF THE| DepartmentUs About

391

Department Sets Aggressive Schedule for New Appliance Standards |  

Broader source: Energy.gov (indexed) [DOE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of EnergyEnergyENERGYWomentheATLANTA, GA - U.S. DepartmenttoJuneEnergy ThisGlobal NuclearDepartment of

392

Appliance Standards and Rulemaking Federal Advisory Committee | Department  

Energy Savers [EERE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion |Energy UsageAUDITVehiclesTankless orA BRIEF HISTORYAgencyLocal|Annual Uncosted. 42,000

393

Appliance Standards and Rulemaking Federal Advisory Committee (ASRAC) -  

Broader source: Energy.gov (indexed) [DOE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarly Career Scientists' ResearchThe OfficeUtility Fed.9-0s)Excel workbook (version 5.2)October 26,Regional

394

Secretary Chu Announces More Stringent Appliance Standards for Home Water  

Office of Environmental Management (EM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of Energy Power.pdf11-161-LNG |September2-SCORECARD-01-24-13 PageUranium Transfer toWeatherized |

395

Appliance Standard Program - The FY 2003 Priority -Setting Summary Repo |  

Office of Environmental Management (EM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of EnergyEnergy Cooperation |South42.2 (April 2012) 1Annual Fuel Economy Guide with 20141A-1BDepartment of

396

Appliance Standard Program - The FY 2003 Priority -Setting Summary Report  

Office of Environmental Management (EM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of EnergyEnergy Cooperation |South42.2 (April 2012) 1Annual Fuel Economy Guide with 20141A-1BDepartment

397

Appliance Standards Program - The FY 2003 Priority Setting Report and  

Office of Environmental Management (EM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of EnergyEnergy Cooperation |South42.2 (April 2012) 1Annual Fuel Economy Guide with

398

Appliance Standards Program - The FY 2003 Priority Setting Report and  

Office of Environmental Management (EM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of EnergyEnergy Cooperation |South42.2 (April 2012) 1Annual Fuel Economy Guide withActions Proposed

399

Appliance Standards Program Overview - 2014 BTO Peer Review | Department of  

Office of Environmental Management (EM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of EnergyEnergy Cooperation |South42.2 (April 2012) 1Annual Fuel Economy Guide withActions

400

Appliance Standards Program Overview - 2015 BTO Peer Review | Department of  

Office of Environmental Management (EM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of EnergyEnergy Cooperation |South42.2 (April 2012) 1Annual Fuel Economy Guide withActionsEnergy 5 BTO

Note: This page contains sample records for the topic "appliance efficiency standards" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Appliance Standards Program Schedule - CCE Overview and Update, dated  

Office of Environmental Management (EM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of EnergyEnergy Cooperation |South42.2 (April 2012) 1Annual Fuel Economy Guide withActionsEnergy 5

402

Appliance Standards Program Schedule - CCE Overview and Update, presented  

Office of Environmental Management (EM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of EnergyEnergy Cooperation |South42.2 (April 2012) 1Annual Fuel Economy Guide withActionsEnergy 5at

403

Appliance Standards Update and Review of Certification, Compliance and  

Office of Environmental Management (EM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of EnergyEnergy Cooperation |South42.2 (April 2012) 1Annual Fuel Economy Guide withActionsEnergy

404

Appliance Standards and Building Codes | Department of Energy  

Office of Environmental Management (EM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of EnergyEnergy Cooperation |South42.2 (April 2012) 1Annual Fuel Economy Guide withActionsEnergyand

405

DOE Announces Tougher Enforcement of Appliance Standards Reporting  

Office of Environmental Management (EM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of Energy Power Systems EngineeringDepartmentSmart GridThirdPartnershipDrillingRFI on RareCold

406

Appliance Standards and Rulemaking Federal Advisory Committee Charter |  

Energy Savers [EERE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion |Energyon ArmedWaste andAccess to OUO Access toEnergy 5 BTO Peer ReviewDepartment of

407

Department of Energy Opens Appliance Standards Investigation for Certain  

Energy Savers [EERE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of Inspector General Office of Audit Services Audit ReportNextConditional Loan Commitment | DepartmentAir Con

408

Secretary Chu Announces More Stringent Appliance Standards for Home Water  

Office of Environmental Management (EM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of EnergyEnergyENERGY TAXBalancedDepartmentRestrictionsExample Sheet) |4,SchoolAandUraniumHeaters and Other

409

STATE ENERGY PROGRAM NOTICE (10-004A), ENERGY EFFICIENCY CONSERVATION...  

Energy Savers [EERE]

PROGRAMS FOR INDIVIDUAL HOMEOWNERS. STATE ENERGY PROGRAM NOTICE (10-004A), ENERGY EFFICIENCY CONSERVATION BLOCK GRANT PROGRAM NOTICE (10-005A), AND APPLIANCE REBATE PROGRAM...

410

McMinnville Water and Light- Residential Energy Efficiency Rebate Program  

Broader source: Energy.gov [DOE]

McMinnville Water and Light (MWL) offers rebates on energy efficient homes, appliances and equipment to their residential customers. Rebates are valid on refrigerators, freezers, clothes washer,...

411

Hydrogen Generator Appliance | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-UpHeatMulti-Dimensional Subject:Groundto ApplyRoadmap HydrogenHydrogenGenerator Appliance

412

Utility Rebates for ENERGY STAR Appliances: Are They Effective?  

E-Print Network [OSTI]

Utility Rebates for ENERGY STAR Appliances: Are They Effective? Souvik Datta Sumeet Gulati CEPE;UTILITY REBATES FOR ENERGY STAR APPLIANCES: ARE THEY EFFECTIVE? SOUVIK DATTA ETH Z¨urich SUMEET GULATI by utility companies. To estimate the impact of these incentives we use the variation in timing and size

413

Performance Evaluation of Virtual Appliances Zhaoqian Chen and David Kaeli  

E-Print Network [OSTI]

Performance Evaluation of Virtual Appliances Zhaoqian Chen and David Kaeli Electrical and Computer for virtu- alized appliances. We are using the XenServer virtual machine system and evaluate its performance in many computing environments. Independent Software Vendors (ISVs) are now using virtual machines

Kaeli, David R.

414

appliance energy testing: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

appliance energy testing First Page Previous Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Next Page Last Page Topic Index 1 Energy Star Appliances 1 Texas...

415

Analysis of Minimum Efficiency Performance Standards for Residential General Service Lighting in Chile  

E-Print Network [OSTI]

Standard for Residential Lighting in Chile, 2010 USResidential General Service Lighting in Chile Virginie E.focus on a regulation for lighting that would ban the sale

Letschert, Virginie E.

2012-01-01T23:59:59.000Z

416

Thinking Globally: How ISO 50001 - Energy Management can make industrial energy efficiency standard practice  

E-Print Network [OSTI]

with the ISO quality (ISO 9001:2008) and environmental (ISOsystem standards such as ISO 9001 and ISO 14001 have somemanagement practices (ISO 9001) and environmental management

McKane, Aimee

2010-01-01T23:59:59.000Z

417

Thinking Globally: How ISO 50001 - Energy Management can make industrial energy efficiency standard practice  

E-Print Network [OSTI]

Thinking Globally: How ISO 50001 – Energy Management canThinking Globally: How ISO 50001 – Energy Management canOrganization for Standardization (ISO) has identified energy

McKane, Aimee

2010-01-01T23:59:59.000Z

418

Load Component Database of Household Appliances and Small Office Equipment  

SciTech Connect (OSTI)

This paper discusses the development of a load component database for household appliances and office equipment. To develop more accurate load models at both transmission and distribution level, a better understanding on the individual behaviors of home appliances and office equipment under power system voltage and frequency variations becomes more and more critical. Bonneville Power Administration (BPA) has begun a series of voltage and frequency tests against home appliances and office equipments since 2005. Since 2006, Researchers at Pacific Northwest National Laboratory has collaborated with BPA personnel and developed a load component database based on these appliance testing results to facilitate the load model validation work for the Western Electricity Coordinating Council (WECC). In this paper, the testing procedure and testing results are first presented. The load model parameters are then derived and grouped. Recommendations are given for aggregating the individual appliance models to feeder level, the models of which are used for distribution and transmission level studies.

Lu, Ning; Xie, YuLong; Huang, Zhenyu; Puyleart, Francis; Yang, Steve

2008-07-24T23:59:59.000Z

419

Safety lock-out device for electrical appliances  

DOE Patents [OSTI]

A safety lock-out device prevents the insertion of an electrical power cord into an electrical power cord receptacle of an electrical appliance. The devise comprises a mounting plate fastened to the appliance and a cover plate hingedly attached to the appliance. The cover plate is movable between a first position and a second position such that, in the first position, the cover plate covers and prevents insertion of a power cord into the appliance receptacle. In said second position, the appliance receptacle is uncovered to permit insertion of a power cord into the receptacle. Extending a lock shank through aligned openings formed in flange members extending from the mounting plate and the cover plate locks the cover plate in the first position.

Cliff, Jr., Paul L. (Bloomingdale, IL)

1996-01-01T23:59:59.000Z

420

Safety lock-out device for electrical appliances  

DOE Patents [OSTI]

A safety lock-out device prevents the insertion of an electrical power cord into an electrical power cord receptacle of an electrical appliance. The device comprises a mounting plate fastened to the appliance and a hinged cover plate attached to the appliance. The cover plate is movable between a first position and a second position such that, in the first position, the cover plate covers and prevents insertion of a power cord into the appliance receptacle. In said second position, the appliance receptacle is uncovered to permit insertion of a power cord into the receptacle. Extending a lock shank through aligned openings formed in flange members extending from the mounting plate, the cover plate locks the cover plate in the first position. 15 figs.

Cliff, P.L. Jr.

1996-07-09T23:59:59.000Z

Note: This page contains sample records for the topic "appliance efficiency standards" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Thinking Globally: How ISO 50001 - Energy Management can make industrial energy efficiency standard practice  

E-Print Network [OSTI]

regarding energy efficiency; • Limited awareness of theof awareness and the corresponding failure to manage energyawareness within the corporate management culture of the potential for energy

McKane, Aimee

2010-01-01T23:59:59.000Z

422

Approaches to representing aircraft fuel efficiency performance for the purpose of a commercial aircraft certification standard  

E-Print Network [OSTI]

Increasing concern over the potential harmful effects of green house gas emissions from various sources has motivated the consideration of an aircraft certification standard as one way to reduce aircraft C02 emissions and ...

Yutko, Brian M. (Brian Matthew)

2011-01-01T23:59:59.000Z

423

Approaches to Representing Aircraft Fuel Efficiency Performance for the Purpose of a Commercial Aircraft Certification Standard  

E-Print Network [OSTI]

Increasing concern over the potential harmful effects of green house gas emissions from various sources has motivated the consideration of an aircraft certification standard as one way to reduce aircraft CO2 emissions and ...

Yutko, Brian

2011-06-27T23:59:59.000Z

424

Energy Efficiency Standards and Labels in North America: Opportunities for Harmonization  

E-Print Network [OSTI]

The US has a standard for incandescent non-reflector lamps.ve ,S m L mc ,L ve ,S m Incandescent Lamps and Luminaires SFluorescent lamps Incandescent reflector lamps Incandescent

Wiel, Stephen

2008-01-01T23:59:59.000Z

425

International Comparison of Energy Labeling and Standards for Energy Efficient and Green Buildings  

E-Print Network [OSTI]

This paper discusses the approaches of the European Union, Germany and India to reduce GHG- emissions and mitigate climate change impacts from buildings through the establishment of energy performance standards and green building...

Hennicke, P.; Shrestha, S.; Schleicher, T.

2011-01-01T23:59:59.000Z

426

Achieving Vehicle Fuel Efficiency: The CAFE Standards and Abstract: As a series of political objectives converge and call for enhanced domestic automobile  

E-Print Network [OSTI]

recommendations for the United States and China: rework minimum fuel efficiency standards, raise the gasoline tax situation in the United States is largely defined by the Energy Policy and Conservation Act, whichAchieving Vehicle Fuel Efficiency: The CAFE Standards and Beyond Abstract: As a series of political

Mauzerall, Denise

427

Carrots and Sticks: A Comprehensive Business Model for the Successful Achievement of Energy Efficiency Resource Standards  

E-Print Network [OSTI]

As-Usual; DSM=Demand Side Management; EE=Energy Efficiency;of the demand side management (DSM) portfolio – projectedshareholder returns. 11 4.2 Demand side management portfolio

Satchwell, Andrew

2013-01-01T23:59:59.000Z

428

Energy efficient operating systems and software  

E-Print Network [OSTI]

Energy efficient system design is becoming increasingly important with the proliferation of portable, battery-operated appliances such as laptops, Personal Digital Assistants (PDAs) and cellular phones. Numerous dedicated ...

Sinha, Amit, 1976-

2001-01-01T23:59:59.000Z

429

Idaho Falls Power- Residential Energy Efficiency Loan Program  

Broader source: Energy.gov [DOE]

Idaho Falls Power's Energy Efficiency Loan Program offers zero interest loans for qualifying customers to purchase and install efficient electric appliances. The program will loan up to 100% of the...

430

International Experience in Standards and Labeling Programs for Rice Cookers  

SciTech Connect (OSTI)

China has had an active program on energy efficiency standards for household appliances since the mid-1990s. Rice cooker is among the first to be subject to such mandatory regulation, since it is one of the most prevalent electric appliances in Chinese households. Since first introduced in 1989, the minimum energy efficiency standard for rice cookers has not been revised. Therefore, the potential for energy saving is considerable. Initial analysis from CNIS indicates that potential carbon savings is likely to reach 7.6 million tons of CO2 by the 10th year of the standard implementation. Since September 2007, CNIS has been working with various groups to develop the new standard for rice cookers. With The Energy Foundation's support, LBNL has assisted CNIS in the revision of the minimum energy efficiency standard for rice cookers that is expected to be effective in 2009. Specifically, work has been in the following areas: assistance in developing consumer survey on usage pattern of rice cookers, review of international standards, review of international test procedures, comparison of the international standards and test procedures, and assessment of technical options of reducing energy use. This report particularly summarizes the findings of reviewing international standards and technical options of reducing energy consumption. The report consists of an overview of rice cooker standards and labeling programs and testing procedures in Hong Kong, South Korea, Japan and Thailand, and Japan's case study in developing energy efficiency rice cooker technologies and rice cooker efficiency programs. The results from the analysis can be summarized as the follows: Hong Kong has a Voluntary Energy Efficiency Labeling scheme for electric rice cookers initiated in 2001, with revision implemented in 2007; South Korea has both MEPS and Mandatory Energy Efficiency Label targeting the same category of rice cookers as Hong Kong; Thailand's voluntary endorsement labeling program is similar to Hong Kong in program design but has 5 efficiency grades; Japan's program is distinct in its adoption of the 'Top Runner' approach, in which, the future efficiency standards is set based on the efficiency levels of the most efficient product in the current domestic market. Although the standards are voluntary, penalties can still be evoked if the average efficiency target is not met. Both Hong Kong and South Korea's tests involve pouring water into the inner pot equal to 80% of its rated volume; however, white rice is used as a load for its tests in Hong Kong whereas no rice is used for tests in South Korea. In Japan's case, water level specified by the manufactures is used and milled rice is used as a load only partially in the tests. Moreover, Japan does not conduct heat efficiency test but its energy consumption measurements tests are much more complex, with 4 different tests are conducted to determine the annual average energy consumption. Hong Kong and Thailand both set Minimum Allowable Heat Efficiency for different rated wattages. The energy efficiency requirements are identical except that the minimum heat efficiency in Thailand is 1 percentage point higher for all rated power categories. In South Korea, MEPS and label's energy efficiency grades are determined by the rice cooker's Rated Energy Efficiency for induction, non-induction, pressure, nonpressure rice cookers. Japan's target standard values are set for electromagnetic induction heating products and non-electromagnetic induction heating products by different size of rice cookers. Specific formulas are used by type and size depending on the mass of water evaporation of the rice cookers. Japan has been the leading country in technology development of various types of rice cookers, and developed concrete energy efficiency standards for rice cookers. However, as consumers in Japan emphasize the deliciousness of cooked rice over other factors, many types of models were developed to improve the taste of cooked rice. Nonetheless, the efficiency of electromagnetic induction heating (IH) rice cook

Zhou, Nan; Zheng, Nina

2008-05-01T23:59:59.000Z

431

Washington State Energy-Efficiency Appliance Rebate Program ...  

Energy Savers [EERE]

ENERGY STAR quali-fied clothes washers, refrigerators, dishwashers, ductless air source heat pumps, and water heaters. Between March and November of 2010, more than 41,000...

432

Oregon State Energy-Efficiency Appliance Rebate Program Helps...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

began in January 2010 with a 70% reimbursement (up to 2,000) on ENERGY STAR qualified heat pumps and furnaces. It was later expanded to include ENERGY STAR qualified water...

433

New York- Residential Energy Efficient Appliance Rebate Program  

Broader source: Energy.gov [DOE]

'''''Note: Under the American Recovery and Reinvestment Act (ARRA) of 2009, the U.S. Department of Energy (DOE) is providing a total of $300 million to U.S. states, U.S. territories and the...

434

Sales Tax Holiday for Energy-Efficient Appliances  

Broader source: Energy.gov [DOE]

'''Note: Legislation enacted in June 2011 ([http://www.ncleg.net/enactedlegislation/sessionlaws/html/2011-2012/sl201... S.B. 267]) that removed geothermal heat pumps from the list of energy systems...

435

AcuTemp Expands as Appliances Become More Energy Efficient  

Office of Energy Efficiency and Renewable Energy (EERE)

AcuTemp, a small U.S. company that manufactures vacuum insulation panels that are needed to maintain precise temperatures for cold-storage products, is expanding and creating jobs in Dayton, OH thanks in part to the Recovery Act.

436

Updated Buildings Sector Appliance and Equipment Costs and Efficiency  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear SecurityTensile Strain Switched Ferromagnetism inS-4500II Field Emission SEM with EDAX (For3WebinarUpdateUpdateMay

437

Updated Buildings Sector Appliance and Equipment Costs and Efficiency  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear SecurityTensile Strain Switched Ferromagnetism inS-4500II Field Emission SEM with EDAX

438

Updated Buildings Sector Appliance and Equipment Costs and Efficiency  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines AboutDecemberSteamYearTexas--StateWinterYear Jan Monthly DownloadPotential8.Updated

439

Updated Buildings Sector Appliance and Equipment Costs and Efficiency  

Gasoline and Diesel Fuel Update (EIA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"Click worksheet9,1,50022,3,,,,6,1,,781Title: Telephone:short version) Themonthly4 Oil(EIA)

440

Washington State Energy-Efficiency Appliance Rebate Program (SEEARP) Spurs  

Office of Environmental Management (EM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of EnergyEnergyENERGYWomen Owned SmallOf The 2012NuclearBradley Nickell02-03 AUDIT REPORTWasLocal Economy,

Note: This page contains sample records for the topic "appliance efficiency standards" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Report to Congress on Appliance Energy Efficiency Rulemakings | Department  

Energy Savers [EERE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of Inspector GeneralDepartment of Energy fromComments onReply Comments of SouthernJune 6, 1996of Energy

442

Students Compete to Design Energy-Efficient Appliances | Department...  

Broader source: Energy.gov (indexed) [DOE]

Engineering department testing the placement of their Hybrid Solar Photovoltaic Panel for Pool Heating. Image: Lawrence Berkeley National Laboratory 3 of 5 Students from...

443

Students Compete to Design Energy-Efficient Appliances | Department of  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: AlternativeEnvironment,Institutes and1 Special Report:Step by StepHigh-LevelStudent and

444

Report to Congress on Appliance Energy Efficiency Rulemakings  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion | Department ofT ib l L dDepartmentnews-flashesEnergy byNuclear Reactor OFFICE

445

International Cooperation on Advancing Equipment and Appliance Efficiency |  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-UpHeatMulti-Dimensionalthe10 DOE Vehicle Technologies andDepartment ofDepartment of

446

Catalog of DC Appliances and Power Systems  

E-Print Network [OSTI]

Sectors with High- Efficiency Electric Motors, Final Report,of the far greater efficiency of electric motors compared to

Garbesi, Karina

2012-01-01T23:59:59.000Z

447

Appliance Rebate Program Still Buzzing in the Beehive State ...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

facts? Cash for Appliances Utah has distributed more than 7,000 rebates for ENERGY STAR products. The program is supported by 2.3 million in Recovery Act funding. Steady...

448

Scheduling Smart Home Appliances Using Mixed Integer Linear Programming  

E-Print Network [OSTI]

electricity generation, personal electrical vehicles (PEVs) and distributed electricity generation the wind power's dynamic contribution to electricity generation and the PEVs' random demand of electricity electricity cost scheduling problem of smart home appliances. Operation char- acteristics, such as expected

Johansson, Karl Henrik

449

Detailed Modeling and Response of Demand Response Enabled Appliances  

SciTech Connect (OSTI)

Proper modeling of end use loads is very important in order to predict their behavior, and how they interact with the power system, including voltage and temperature dependencies, power system and load control functions, and the complex interactions that occur between devices in such an interconnected system. This paper develops multi-state time variant residential appliance models with demand response enabled capabilities in the GridLAB-DTM simulation environment. These models represent not only the baseline instantaneous power demand and energy consumption, but the control systems developed by GE Appliances to enable response to demand response signals and the change in behavior of the appliance in response to the signal. These DR enabled appliances are simulated to estimate their capability to reduce peak demand and energy consumption.

Vyakaranam, Bharat; Fuller, Jason C.

2014-04-14T23:59:59.000Z

450

Will cheap gas and efficient cars imperil air-quality goals under relaxed emission standards  

SciTech Connect (OSTI)

Long-term trends, to the year 2000, of urban household travel were forecast for prototype metropolitan areas under several sets of energy prices, auto fuel economy, and emission standards. Dramatic improvements in air quality were forecast due to redistribution of travel and lowered emissions. The exception to this trend to rapidly growing cities, such as those in the west and southwest experiencing sprawl development that characterized many urbanized areas in the industrial northeast and midwest during the 1950's and 1960's. In one test city, where the rate of urbanization has slowed significantly, analysis indicated that relaxation of the light-duty-vehicle NO/sub x/ standard from 1.0 gm/mi to 2.0 gm/mi would not severely threaten attainment of the ambient NO/sub x/ standards by 1987 owing to redistribution of population and activities. The difference in total energy impacts was determined to be negligible, assuming moderate increase in petroleum prices through 1995 (3.1%/year). In another policy test, without changing emission standards, an increase in fuel price of 3.75%/year from 1980 to 2000 reduced travel and provided a 4% decrease in energy use and a corresponding decrease in CO, HC and NO/sub x/. Virtually all of the reduction in travel and emissions was due to non-work travel, which fell 9%. The price increase damped the increase in auto travel per person that would occur as autos become cheaper to operate and as household wealth increases, making the answer to the title a cautious yes, given steady or slowly rising fuel prices.

LaBelle, S.J.; Saricks, C.L.; Moses, D.O.

1983-04-01T23:59:59.000Z

451

Buildings Energy Data Book: 7.7 Efficiency Standards for Lighting  

Buildings Energy Data Book [EERE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: Alternative Fuels Data CenterEnergyAuthorization for(EV) Road UserNatural1 Efficiency

452

Financial Impact of Energy Efficiency under a Federal Renewable Electricity Standard: Case Study of a Kansas "super-utility"  

E-Print Network [OSTI]

and benefits of alternative energy efficiency portfoliosrequirements, and alternative energy efficiency portfolios).estimates for two alternative energy efficiency portfolios (

Cappers, Peter

2010-01-01T23:59:59.000Z

453

Supplement to the ``determination analysis`` (ORNL-6847) and analysis of the NEMA efficiency standard for distribution transformers  

SciTech Connect (OSTI)

This report contains additional information for use by the US Department of Energy in making a determination on proposing energy conservation standards for distribution transformers as required by the Energy Policy Act of 1992. An earlier determination study by the Oak Ridge National Laboratory determined that cost-effective, technically feasible energy savings could be achieved by distribution transformer standards and that these savings are significant relative to other product conservation standards. This study was documented in a final report, ``Determination Analysis of Energy Conservation Standards for Distribution Transformers`` (ORNL-6847, July 1996). The energy conservation options analyzed in this study were estimated to save 5.2 to 13.7 quads from 2000--2030. The energy savings for the determination study cases have been revised downward for a number of reasons. The transformer market, both present and future, was overestimated in the previous study, particularly for dry-type transformers, which have the greatest energy-saving potential. Moreover, a revision downwards of the effective annual loads for utility owned transformers also results in lower energy savings. The present study assesses four of the five conservation cases from the earlier determination study as well as the National Electrical Manufacturers Association energy efficiency standard NEMA TP 1-1996 using the updated data and a more accurate disaggregated analysis model. According to these new estimates, the savings ranged from 2.5 to 10.7 quads of primary energy for the 30-year period 2004 to 2034. For the TP-1 case, data were available to calculate the payback period required to recover the extra cost from the value of the energy saved. The average payback period based on the average national cost of electricity is 2.76 years. 15 figs., 23 tabs.

Barnes, P.R.; Das, S.; McConnell, B.W.; Van Dyke, J.W.

1997-09-01T23:59:59.000Z

454

Financial Impact of Energy Efficiency under a Federal Renewable Electricity Standard: Case Study of a Kansas "super-utility"  

E-Print Network [OSTI]

efficiency resources as part of an RES compliance strategy). Energy efficiency with a comprehensive business model:

Cappers, Peter

2010-01-01T23:59:59.000Z

455

Electrical appliance energy consumption control methods and electrical energy consumption systems  

DOE Patents [OSTI]

Electrical appliance energy consumption control methods and electrical energy consumption systems are described. In one aspect, an electrical appliance energy consumption control method includes providing an electrical appliance coupled with a power distribution system, receiving electrical energy within the appliance from the power distribution system, consuming the received electrical energy using a plurality of loads of the appliance, monitoring electrical energy of the power distribution system, and adjusting an amount of consumption of the received electrical energy via one of the loads of the appliance from an initial level of consumption to an other level of consumption different than the initial level of consumption responsive to the monitoring.

Donnelly, Matthew K. (Kennewick, WA); Chassin, David P. (Pasco, WA); Dagle, Jeffery E. (Richland, WA); Kintner-Meyer, Michael (Richland, WA); Winiarski, David W. (Kennewick, WA); Pratt, Robert G. (Kennewick, WA); Boberly-Bartis, Anne Marie (Alexandria, VA)

2008-09-02T23:59:59.000Z

456

Electrical appliance energy consumption control methods and electrical energy consumption systems  

DOE Patents [OSTI]

Electrical appliance energy consumption control methods and electrical energy consumption systems are described. In one aspect, an electrical appliance energy consumption control method includes providing an electrical appliance coupled with a power distribution system, receiving electrical energy within the appliance from the power distribution system, consuming the received electrical energy using a plurality of loads of the appliance, monitoring electrical energy of the power distribution system, and adjusting an amount of consumption of the received electrical energy via one of the loads of the appliance from an initial level of consumption to an other level of consumption different than the initial level of consumption responsive to the monitoring.

Donnelly, Matthew K. (Kennewick, WA); Chassin, David P. (Pasco, WA); Dagle, Jeffery E. (Richland, WA); Kintner-Meyer, Michael (Richland, WA); Winiarski, David W. (Kennewick, WA); Pratt, Robert G. (Kennewick, WA); Boberly-Bartis, Anne Marie (Alexandria, VA)

2006-03-07T23:59:59.000Z

457

Consumer life-cycle cost impacts of energy-efficiency standards for residential-type central air conditioners and heat pumps  

SciTech Connect (OSTI)

In support of the federal government's efforts to raise the minimum energy-efficiency standards for residential-type central air conditioners and heat pumps, a consumer life-cycle cost (LCC) analysis was conducted to demonstrate the economic impacts on individual consumers from revisions to the standards. LCC is the consumer's cost of purchasing and installing an air conditioner or heat pump and operating the unit over its lifetime. The LCC analysis is conducted on a nationally representative sample of air conditioner and heat pump consumers resulting in a distribution of LCC impacts showing the percentage of consumers that are either benefiting or being burdened by increased standards. Relative to the existing minimum efficiency standard of 10 SEER, the results show that a majority of split system air conditioner and heat pump consumers will either benefit or be insignificantly impacted by increased efficiency standards of up to 13 SEER.

Rosenquist, Gregory; Chan, Peter; Lekov, Alex; McMahon, James; Van Buskirk, Robert

2001-10-10T23:59:59.000Z

458

Country Review of Energy-Efficiency Financial Incentives in the Residential Sector  

SciTech Connect (OSTI)

A large variety of energy-efficiency policy measures exist. Some are mandatory, some are informative, and some use financial incentives to promote diffusion of efficient equipment. From country to country, financial incentives vary considerably in scope and form, the type of framework used to implement them, and the actors that administer them. They range from rebate programs administered by utilities under an Energy-Efficiency Resource Standards (EERS) regulatory framework (California, USA) to the distribution of Eco-points rewarding customers for buying highly efficient appliances (Japan). All have the primary objective of transforming the current market to accelerate the diffusion of efficient technologies by addressing up-front cost barriers faced by consumers; in most instances, efficient technologies require a greater initial investment than conventional technologies. In this paper, we review the different market transformation measures involving the use of financial incentives in the countries belonging to the Major Economies Forum. We characterize the main types of measures, discuss their mechanisms, and provide information on program impacts to the extent that ex-ante or ex-post evaluations have been conducted. Finally, we identify best practices in financial incentive programs and opportunities for coordination between Major Economies Forum countries as envisioned under the Super Efficient Appliance Deployment (SEAD) initiative.

Can, Stephane de la Rue du; Shah, Nihar; Phadke, Amol

2011-07-13T23:59:59.000Z

459

Encouraging Combined Heat and Power in California Buildings  

E-Print Network [OSTI]

2020. Furthermore, aggressive building and appliance efficiency standards, including targets for zero net

Stadler, Michael

2014-01-01T23:59:59.000Z

460

EA-2001: Energy Efficiency Design Standards: New Federal Commercial and Multi-Family High-Rise Residential Buildings and New Federal Low-Rise Residential Buildings  

Broader source: Energy.gov [DOE]

The U.S. Department of Energy (DOE) is publishing this final rule to implement provisions in the Energy Conservation and Production Act (ECPA) that require DOE to update the baseline Federal energy efficiency performance standards for the construction of new Federal commercial and multi-family high-rise residential buildings. This rule updates the baseline Federal commercial standard to the American Society of Heating, Refrigerating, and Air-Conditioning Engineers (ASHRAE) Standard 90.1-2013.

Note: This page contains sample records for the topic "appliance efficiency standards" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Recommended Changes to Specifications for Demand Controlled Ventilation in California's Title 24 Building Energy Efficiency Standards  

SciTech Connect (OSTI)

In demand-controlled ventilation (DCV), rates of outdoor air ventilation are automatically modulated as occupant density varies. The objective is to keep ventilation rates at or above design specifications and code requirements and also to save energy by avoiding excessive ventilation rates. DCV is most often used in spaces with highly variable and sometime dense occupancy. In almost all cases, carbon dioxide (CO{sub 2}) sensors installed in buildings provide the signal to the ventilation rate control system. People produce and exhale CO{sub 2} as a consequence of their normal metabolic processes; thus, the concentrations of CO{sub 2} inside occupied buildings are higher than the concentrations of CO{sub 2} in the outdoor air. The magnitude of the indoor-outdoor CO{sub 2} concentration difference decreases as the building's ventilation rate per person increases. The difference between the indoor and outdoor CO{sub 2} concentration is also a proxy for the indoor concentrations of other occupant-generated bioeffluents, such as body odors. Reviews of the research literature on DCV indicate a significant potential for energy savings, particularly in buildings or spaces with a high and variable occupancy. Based on modeling, cooling energy savings from applications of DCV are as high as 20%. With support from the California Energy Commission and the U.S. Department of Energy, the Lawrence Berkeley National Laboratory has performed research on the performance of CO{sub 2} sensing technologies and optical people counters for DCV. In addition, modeling was performed to evaluate the potential energy savings and cost effectiveness of using DCV in general office spaces within the range of California climates. The above-described research has implications for the specifications pertaining to DCV in section 121 of the California Title 24 Standard. Consequently, this document suggests possible changes in these specifications based on the research findings. The suggested changes in specifications were developed in consultation with staff from the Iowa Energy Center who evaluated the accuracy of new CO{sub 2} sensors in laboratory-based research. In addition, staff of the California Energy Commission, and their consultants in the area of DCV, provided input for the suggested changes in specifications.

Fisk, William J.; Sullivan, Douglas P.; Faulkner, David

2010-04-08T23:59:59.000Z

462

EnergyPlus Analysis Capabilities for Use in California Building Energy Efficiency Standards Development and Compliance Calculations  

E-Print Network [OSTI]

requirements for energy-efficient design and construction,technologies used for energy-efficient design. Being able toand engineers design energy efficient buildings. Currently

Hong, Tianzhen

2009-01-01T23:59:59.000Z

463

Financial Impact of Energy Efficiency under a Federal Renewable Electricity Standard: Case Study of a Kansas "super-utility"  

E-Print Network [OSTI]

2009. The 2009 State Energy Efficiency Scorecard. ACEEEof Ratepayer-Funded Energy Efficiency in the U.S.. Therenewable energy and energy efficiency into a sustainable

Cappers, Peter

2010-01-01T23:59:59.000Z

464

EnergyPlus Analysis Capabilities for Use in California Building Energy Efficiency Standards Development and Compliance Calculations  

E-Print Network [OSTI]

like condensing boilers have efficiency depending on supplymodel condensing boilers whose efficiency depends on supplyfan for boilers and furnaces. Most of ACM efficiency data

Hong, Tianzhen

2009-01-01T23:59:59.000Z

465

V-021: Cisco IronPort Web / Email Security Appliance Sophos Anti...  

Broader source: Energy.gov (indexed) [DOE]

1: Cisco IronPort Web Email Security Appliance Sophos Anti-Virus Multiple Vulnerabilities V-021: Cisco IronPort Web Email Security Appliance Sophos Anti-Virus Multiple...

466

Predicting Backdrafting and Spillage for Natural-Draft Gas Combustion Appliances: Validating VENT-II  

E-Print Network [OSTI]

1 Predicting Backdrafting and Spillage for Natural-Draft Gas Combustion Appliances: Validating VENT. "Predicting Backdrafting and Spillage for Natural-Draft Gas Combustion Appliances: A Validation of VENT

467

Table HC15.10 Home Appliances Usage Indicators by Four Most...  

U.S. Energy Information Administration (EIA) Indexed Site

AppliancesTools... 56.2 5.0 3.4 4.3 6.2 Other Appliances Used Auto BlockEngineBattery Heater... 0.8 Q N N N Hot Tub or...

468

Catalog of DC Appliances and Power Systems  

E-Print Network [OSTI]

battery storage. This study claims only a modest 1.5% – 3% efficiencybattery. Figure 25. Storage technologies comparison. Efficiency

Garbesi, Karina

2012-01-01T23:59:59.000Z

469

Comment submitted by BSH Home Appliances Corporation regarding the Energy Star Verification Testing Program  

Broader source: Energy.gov [DOE]

This document is a comment submitted by BSH Home Appliances Corporation regarding the Energy Star Verification Testing Program

470

EnergyPlus Analysis Capabilities for Use in California Building Energy Efficiency Standards Development and Compliance Calculations  

SciTech Connect (OSTI)

California has been using DOE-2 as the main building energy analysis tool in the development of building energy efficiency standards (Title 24) and the code compliance calculations. However, DOE-2.1E is a mature program that is no longer supported by LBNL on contract to the USDOE, or by any other public or private entity. With no more significant updates in the modeling capabilities of DOE-2.1E during recent years, DOE-2.1E lacks the ability to model, with the necessary accuracy, a number of building technologies that have the potential to reduce significantly the energy consumption of buildings in California. DOE-2's legacy software code makes it difficult and time consuming to add new or enhance existing modeling features in DOE-2. Therefore the USDOE proposed to develop a new tool, EnergyPlus, which is intended to replace DOE-2 as the next generation building simulation tool. EnergyPlus inherited most of the useful features from DOE-2 and BLAST, and more significantly added new modeling capabilities far beyond DOE-2, BLAST, and other simulations tools currently available. With California's net zero energy goals for new residential buildings in 2020 and for new commercial buildings in 2030, California needs to evaluate and promote currently available best practice and emerging technologies to significantly reduce energy use of buildings for space cooling and heating, ventilating, refrigerating, lighting, and water heating. The California Energy Commission (CEC) needs to adopt a new building energy simulation program for developing and maintaining future versions of Title 24. Therefore, EnergyPlus became a good candidate to CEC for its use in developing and complying with future Title 24 upgrades. In 2004, the Pacific Gas and Electric Company contracted with ArchitecturalEnergy Corporation (AEC), Taylor Engineering, and GARD Analytics to evaluate EnergyPlus in its ability to model those energy efficiency measures specified in both the residential and nonresidential Alternative Calculation Method (ACM) of the Title-24 Standards. The AEC team identified gaps between EnergyPlus modeling capabilities and the requirements of Title 24 and ACMs. AEC's evaluation was based on the 2005 version of Title 24 and ACMs and the version 1.2.1 of EnergyPlus released on October 1, 2004. AEC's evaluation is useful for understanding the functionality and technical merits of EnergyPlus for implementing the performance-based compliance methods described in the ACMs. However, it did not study the performance of EnergyPlus in actually making building energy simulations for both the standard and proposed building designs, as is required for any software program to be certified by the CEC for use in doing Title-24 compliance calculations. In 2005, CEC funded LBNL to evaluate the use of EnergyPlus for compliance calculations by comparing the ACM accuracy test runs between DOE-2.1E and EnergyPlus. LBNL team identified key technical issues that must be addressed before EnergyPlus can be considered by the CEC for use in developing future Nonresidential Title-24 Standards or as an ACM tool. With Title 24 being updated to the 2008 version (which adds new requirements to the standards and ACMs), and EnergyPlus having been through several update cycles from version 1.2.1 to 2.1, it becomes crucial to review and update the previously identified gaps of EnergyPlus for use in Title 24, and more importantly to close the gaps which would help pave the way for EnergyPlus to be adopted as a Title 24 compliance ACM. With this as the key driving force, CEC funded LBNL in 2008 through this PIER (Public Interest Energy Research) project with the overall technical goal to expand development of EnergyPlus to provide for its use in Title-24 standard compliance and by CEC staff.

Hong, Tianzhen; Buhl, Fred; Haves, Philip

2008-03-28T23:59:59.000Z

471

Shakopee Public Utilities- Residential Energy Efficiency Rebate Program  

Broader source: Energy.gov [DOE]

Shakopee Public Utilities offers its residential customers rebates on a variety of energy-efficient appliances and equipment. Rebates are available for CFL and LED lighting, air-source and...

472

Co-Mo Electric Cooperative- Residential Energy Efficiency Rebate Program  

Broader source: Energy.gov [DOE]

Co-Mo Electric Cooperative provides rebates to residential and commercial members who install air source, dual fuel, and/or geothermal heat pumps, and certain energy efficient appliances. The...

473

La Plata Electric Association- Energy Efficient Equipment Rebate Program  

Broader source: Energy.gov [DOE]

La Plata Electric Association (LPEA) offers a variety of rebates for members to improve the efficiency of homes and facilities. Rebates are available for a variety of Energy Star appliances, the...

474

Acknowledgments The Efficiency Committee expresses its gratitude to Tim Tutt and John Wilson,  

E-Print Network [OSTI]

Davis Energy Group #12;#12;OPTIONS FOR ENERGY EFFICIENCY in EXISTING BUILDINGS COMMITTEE REPORT i TABLE California's Successful Energy Efficiency Programs: Current Programs and Initiatives.......................................2 Building and Appliance Energy

475

Progress towards Managing Residential Electricity Demand: Impacts of Standards and Labeling for Refrigerators and Air Conditioners in India  

SciTech Connect (OSTI)

The development of Energy Efficiency Standards and Labeling (EES&L) began in earnest in India in 2001 with the Energy Conservation Act and the establishment of the Indian Bureau of Energy Efficiency (BEE). The first main residential appliance to be targeted was refrigerators, soon to be followed by room air conditioners. Both of these appliances are of critical importance to India's residential electricity demand. About 15percent of Indian households own a refrigerator, and sales total about 4 million per year, but are growing. At the same time, the Indian refrigerator market has seen a strong trend towards larger and more consumptive frost-free units. Room air conditioners in India have traditionally been sold to commercial sector customers, but an increasing number are going to the residential sector. Room air conditioner sales growth in India peaked in the last few years at 20percent per year. In this paper, we perform an engineering-based analysis using data specific to Indian appliances. We evaluate costs and benefits to residential and commercial sector consumers from increased equipment costs and utility bill savings. The analysis finds that, while the BEE scheme presents net benefits to consumers, there remain opportunities for efficiency improvement that would optimize consumer benefits, according to Life Cycle Cost analysis. Due to the large and growing market for refrigerators and air conditioners in India, we forecast large impacts from the standards and labeling program as scheduled. By 2030, this program, if fully implemented would reduce Indian residential electricity consumption by 55 TWh. Overall savings through 2030 totals 385 TWh. Finally, while efficiency levels have been set for several years for refrigerators, labels and MEPS for these products remain voluntary. We therefore consider the negative impact of this delay of implementation to energy and financial savings achievable by 2030.

McNeil, Michael A.; Iyer, Maithili

2009-05-30T23:59:59.000Z

476

Technical support document: Energy efficiency standards for consumer products: Room air conditioners, water heaters, direct heating equipment, mobile home furnaces, kitchen ranges and ovens, pool heaters, fluorescent lamp ballasts and television sets. Volume 3, Water heaters, pool heaters, direct heating equipment, and mobile home furnaces  

SciTech Connect (OSTI)

This is Volume 3 in a series of documents on energy efficiency of consumer products. This volume discusses energy efficiency of water heaters. Water heaters are defined by NAECA as products that utilize oil, gas, or electricity to heat potable water for use outside the heater upon demand. These are major appliances, which use a large portion (18% on average) of total energy consumed per household (1). They differ from most other appliances in that they are usually installed in obscure locations as part of the plumbing and are ignored until they fail. Residential water heaters are capable of heating water up to 180{degrees}F, although the setpoints are usually set lower.

Not Available

1993-11-01T23:59:59.000Z

477

Super efficient refrigeration systems: Two non-CFC designs ready for commercialization  

SciTech Connect (OSTI)

Two high-efficiency prime movers for refrigeration are ready for field testing and commercialization. Either machine, combined with other advanced measures, could result in a CFC-free refrigerator using significantly less energy than units meeting the 1993 US efficiency standards. The first design is a linear motor/compressor that manufacturers could substitute for the standard rotating motor/compressor in a conventional refrigerator. The second design is a Stirling-cycle refrigeration machine that is self contained and uses helium gas as the working fluid. The results of prototype testing, the inherent simplicity of both machines, and their virtually frictionless operation point to economical and reliable service. If these features are confirmed in further testing now being conducted by appliance and compressor manufacturers, these machines will be strong candidates for inclusion in super efficient refrigerator designs over the next few years.

Stickney, B.L.

1992-12-31T23:59:59.000Z

478

Energy Efficiency Resource Standard  

Broader source: Energy.gov [DOE]

In 2007, the Minnesota legislature passed the Next Generation Energy Act (NGEA), which requires both electric and natural gas investor-owned utilities to reduce energy sales by 1.5% of average...

479

Energy Efficiency Standard  

Broader source: Energy.gov [DOE]

The 2007 Illinois Power Agency Act (IPAA) requires both electric and natural gas utilities establish annual energy-savings goals and reduce energy delivered and peak demand. Utilities are required...

480

Electric Efficiency Standard  

Broader source: Energy.gov [DOE]

In December 2009, the Indiana Utility Regulatory Commission's (IURC) ordered utilities to establish demand-side management (DSM) electric savings goals leading to 2.0% reduction of electricity...

Note: This page contains sample records for the topic "appliance efficiency standards" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

COOKING APPLIANCE USE IN CALIFORNIA HOMES--DATA  

E-Print Network [OSTI]

COOKING APPLIANCE USE IN CALIFORNIA HOMES--DATA COLLECTED FROM A WEB-BASED SURVEY Victoria L. Klug, Agnes B. Lobscheid, and Brett C. Singer Environmental Energy Technologies Division August 2011 LBNL-5028 FROM A WEB-BASED SURVEY Victoria L. Klug, Agnes B. Lobscheid, and Brett C. Singer Indoor Environment

482

Monitoring Massive Appliances by a Minimal Number of Smart Meters  

E-Print Network [OSTI]

56 Monitoring Massive Appliances by a Minimal Number of Smart Meters YONGCAI WANG, XIAOHONG HAO. This article presents a framework for deploying a minimal number of smart meters to accurately track the ON of required smart meters is studied by an entropy-based approach, which qualifies the impact of meter

Wang, Yongcai

483

Leveraging smart meter data to recognize home appliances Markus Weiss+#  

E-Print Network [OSTI]

Leveraging smart meter data to recognize home appliances Markus Weiss+# , Adrian Helfenstein -- The worldwide adoption of smart meters that measure and communicate residential electricity consumption gives demand. In this paper we present an infrastructure and a set of algorithms that make use of smart meters

484

Combustion Safety for Appliances Using Indoor Air (Fact Sheet)  

SciTech Connect (OSTI)

This measure guideline covers how to assess and carry out the combustion safety procedures for appliances and heating equipment that uses indoor air for combustion in low-rise residential buildings. Only appliances installed in the living space, or in an area freely communicating with the living space, vented alone or in tandem with another appliance are considered here. A separate measure guideline addresses combustion appliances located either within the living space in enclosed closets or side rooms or outside the living space in an adjacent area like an attic or garage that use outdoor air for combustion. This document is for inspectors, auditors, and technicians working in homes where energy upgrades are being conducted whether or not air infiltration control is included in the package of measures being applied. In the indoor combustion air case, guidelines summarized here are based on language provided in several of the codes to establish minimum requirements for the space using simplified prescriptive measures. In addition, building performance testing procedures are provided by testing agencies. The codes in combination with the test procedures offer comprehensive combustion safety coverage to address safety concerns, allowing inexperienced residential energy retrofit inspectors to effectively address combustion safety issues and allow energy retrofits to proceed.

Not Available

2014-05-01T23:59:59.000Z

485

Financial Impact of Energy Efficiency under a Federal Renewable Electricity Standard: Case Study of a Kansas "super-utility"  

E-Print Network [OSTI]

state-based renewable energy policies have significantlyin renewable electricity and energy-efficiency policy.s renewable energy sources and energy efficiency policy

Cappers, Peter

2010-01-01T23:59:59.000Z

486

EPA ENERGY STAR: Tackling Growth in Home Electronics and Small Appliances  

SciTech Connect (OSTI)

Over a decade ago, the electricity consumption associated with home electronics and other small appliances emerged onto the global energy policy landscape as one of the fastest growing residential end uses with the opportunity to deliver significant energy savings. As our knowledge of this end use matures, it is essential to step back and evaluate the degree to which energy efficiency programs have successfully realized energy savings and where savings opportunities have been missed.For the past fifteen years, we have quantified energy, utility bill, and carbon savings for US EPA?s ENERGY STAR voluntary product labeling program. In this paper, we present a unique look into the US residential program savings claimed to date for EPA?s ENERGY STAR office equipment, consumer electronics, and other small household appliances as well as EPA?s projected program savings over the next five years. We present a top-level discussion identifying program areas where EPA?s ENERGY STAR efforts have succeeded and program areas where ENERGY STAR efforts did not successfully address underlying market factors, technology issues and/or consumer behavior. We end by presenting the magnitude of ?overlooked? savings.

Sanchez, Marla Christine; Brown, Richard; Homan, Gregory

2008-11-17T23:59:59.000Z

487

Catalog of DC Appliances and Power Systems  

E-Print Network [OSTI]

DC solar-powered DC air-conditioning heat pump produced byRoom Air Conditioners Geothermal Heat Pumps Lighting-efficiency of an air source electric heat-pump water heater

Garbesi, Karina

2012-01-01T23:59:59.000Z

488

Modeling of GE Appliances: Cost Benefit Study of Smart Appliances in Wholesale Energy, Frequency Regulation, and Spinning Reserve Markets  

SciTech Connect (OSTI)

This report is the second in a series of three reports describing the potential of GE’s DR-enabled appliances to provide benefits to the utility grid. The first report described the modeling methodology used to represent the GE appliances in the GridLAB-D simulation environment and the estimated potential for peak demand reduction at various deployment levels. The third report will explore the technical capability of aggregated group actions to positively impact grid stability, including frequency and voltage regulation and spinning reserves, and the impacts on distribution feeder voltage regulation, including mitigation of fluctuations caused by high penetration of photovoltaic distributed generation. In this report, a series of analytical methods were presented to estimate the potential cost benefit of smart appliances while utilizing demand response. Previous work estimated the potential technical benefit (i.e., peak reduction) of smart appliances, while this report focuses on the monetary value of that participation. The effects on wholesale energy cost and possible additional revenue available by participating in frequency regulation and spinning reserve markets were explored.

Fuller, Jason C.; Parker, Graham B.

2012-12-31T23:59:59.000Z

489

EA-1918: Final Rule, 10 CFR 433, "Energy Efficiency Standards for New Federal Commercial and MultiFamily High-Rise Residential Buildings" RIN 1904-AC60  

Broader source: Energy.gov [DOE]

This EA evaluates the environmental impacts of implementing provisions in the Energy Conservation and Production Act (ECPA) that require DOE to update the baseline Federal energy efficiency performance standards for the construction of new Federal buildings, including commercial and multi-family high-rise residential buildings. This EA addresses Federal commercial standard to the American Society of Heating, Refrigerating, and Air-Conditioning Engineers (ASHRAE) Standard 90.1-2010. The Final Rule was published in the Federal Register on July 9, 2013, 78 FR 40945.

490

Environmental assessment for proposed energy conservation standards for two types of consumer products; refrigerators, refrigerator-freezers, and freezers; small gas furnaces; and a proposed No standard standard for television sets  

SciTech Connect (OSTI)

This environmental assessment (EA) evaluates the environmental impacts resulting from new or amended energy-efficiency standard for refrigerators, refrigerator-freezers, freezers, small gas furnaces, and television sets as mandated by the National Appliance Energy Conservation Act of 1987. A complete description of the Engineering and Economic Analysis of the proposed standards may be found elsewhere in the Technical Support Document (TSD). Four of the 14 scenarios for product design changes described in the Engineering Analysis of the TSD are chosen for environmental assessment based on their relative importance as design measures. Values for energy savings that result from product design changes are also taken from the TSD. The two main environmental concerns addressed are emissions from fossil fuel-fired electricity generation and the chlorofluorcarbons used in the production of rigid insulation foam. Each of the 12 design options for refrigerators and freezers result in decreased electricity use and and, therefore, reduced power plant emissions. Design changes that call for additional rigid foam insulation per appliance are of interest because they affect chlorofluorocarbon consumption. There is strong evidence that chlorofluorocarbons migrate to the stratosphere, break down, and catalyze the destruction of stratospheric ozone.

Not Available

1988-01-01T23:59:59.000Z

491

Interference between electronic lighting and other appliances  

SciTech Connect (OSTI)

This paper presents empirical data from the laboratory and the field to provide an overview of electromagnetic interference between high-efficiency electronic lighting and certain other electronic devices, such as power-line carrier systems, security systems, and remote controls for televisions and VCRs. Reported cases involving both electronic lighting emissions and immunity in building power systems are summarized according to basic interference mechanisms. To illustrate the potential complexities of this problem, the paper describes a case where high-efficiency lighting interfered with a hearing aid. The hearing aid case includes a field survey, laboratory investigations, and recommended solutions to the problem.

Schwabe, R.J.; Zelingher, S. [New York Power Authority, New York, NY (United States); Key, T.; Phipps, K. [EPRI Power Electronics Applications Center, Knoxville, TN (United States)

1995-12-31T23:59:59.000Z

492

Technical support document: Energy conservation standards for consumer products: Dishwashers, clothes washers, and clothes dryers including: Environmental impacts; regulatory impact analysis  

SciTech Connect (OSTI)

The Energy Policy and Conservation Act as amended (P.L. 94-163), establishes energy conservation standards for 12 of the 13 types of consumer products specifically covered by the Act. The legislation requires the Department of Energy (DOE) to consider new or amended standards for these and other types of products at specified times. This Technical Support Document presents the methodology, data and results from the analysis of the energy and economic impacts of standards on dishwashers, clothes washers, and clothes dryers. The economic impact analysis is performed in five major areas: An Engineering Analysis, which establishes technical feasibility and product attributes including costs of design options to improve appliance efficiency. A Consumer Analysis at two levels: national aggregate impacts, and impacts on individuals. The national aggregate impacts include forecasts of appliance sales, efficiencies, energy use, and consumer expenditures. The individual impacts are analyzed by Life-Cycle Cost (LCC), Payback Periods, and Cost of Conserved Energy (CCE), which evaluate the savings in operating expenses relative to increases in purchase price; A Manufacturer Analysis, which provides an estimate of manufacturers' response to the proposed standards. Their response is quantified by changes in several measures of financial performance for a firm. An Industry Impact Analysis shows financial and competitive impacts on the appliance industry. A Utility Analysis that measures the impacts of the altered energy-consumption patterns on electric utilities. A Environmental Effects analysis, which estimates changes in emissions of carbon dioxide, sulfur oxides, and nitrogen oxides, due to reduced energy consumption in the home and at the power plant. A Regulatory Impact Analysis collects the results of all the analyses into the net benefits and costs from a national perspective. 47 figs., 171 tabs. (JF)

Not Available

1990-12-01T23:59:59.000Z

493

National Energy Efficiency Evaluation, Measurement and Verification (EM&V) Standard: Scoping Study of Issues and Implementation Requirements  

E-Print Network [OSTI]

the absence of a cap and trade program, energy consumptioncaps and a cap and trade system, the energy efficiencyIncluding energy efficiency in an emissions cap and trade

Schiller, Steven R.

2011-01-01T23:59:59.000Z

494

Towards a Sustainable Energy Balance: Progressive Efficiency and the Return of Energy Conservation  

SciTech Connect (OSTI)

We argue that a primary focus on energy efficiency may not be sufficient to slow (and ultimately reverse) the growth in total energy consumption and carbon emissions. Instead, policy makers need to return to an earlier emphasis on"conservation," with energy efficiency seen as a means rather than an end in itself. We briefly review the concept of"intensive" versus"extensive" variables (i.e., energy efficiency versus energy consumption), and why attention to both consumption and efficiency is essential for effective policy in a carbon- and oil-constrained world with increasingly brittle energy markets. To start, energy indicators and policy evaluation metrics need to reflect energy consumption as well as efficiency. We introduce the concept of"progressive efficiency," with the expected or required level of efficiency varying as a function of house size, appliance capacity, or more generally, the scale of energy services. We propose introducing progressive efficiency criteria first in consumer information programs (including appliance labeling categories) and then in voluntary rating and recognition programs such as ENERGY STAR. As acceptance grows, the concept could be extended to utility rebates, tax incentives, and ultimately to mandatory codes and standards. For these and other programs, incorporating criteria for consumption as well as efficiency offers a path for energy experts, policy-makers, and the public to begin building consensus on energy policies that recognize the limits of resources and global carrying-capacity. Ultimately, it is both necessary and, we believe, possible to manage energy consumption, not just efficiency in order to achieve a sustainable energy balance. Along the way, we may find it possible to shift expectations away from perpetual growth and toward satisfaction with sufficiency.

Diamond, Rick; Harris, Jeff; Diamond, Rick; Iyer, Maithili; Payne, Christopher; Blumstein, Carl; Siderius, Hans-Paul

2007-08-13T23:59:59.000Z

495

Design Considerations for Frequency Responsive Grid Friendly Appliances  

SciTech Connect (OSTI)

The paper addresses design considerations for frequency responsive Grid FriendlyTM appliances (FR-GFAs). Case studies have been done based on the frequency data collected in 2003 in Western Electricity Coordinating Council (WECC) systems. An FR-GFA can turn on/off based on frequency signals and make selective low-frequency load shedding possible at appliance level. FR-GFAs can also be treated as an spinning reserve to maintain a load-to-generation balance under power system normal operation states. The triggering frequency and duration of the FR-GFA device with different frequency setting schemes are simulated. Design considerations of the FR-GFA are then discussed based on simulation results.

Lu, Ning; Hammerstrom, Donald J.

2006-05-24T23:59:59.000Z

496

Issuance 2014-11-21:Energy Efficiency Program for Consumer Products: Energy Conservation Standards for Ceiling Fans: Availability of the Preliminary Technical Support Document, Notice of Comment Period Extension  

Broader source: Energy.gov [DOE]

Energy Efficiency Program for Consumer Products: Energy Conservation Standards for Ceiling Fans: Availability of the Preliminary Technical Support Document, Notice of Comment Period Extension

497

EA-2001: Final Rule, 10 CFR Part 433, ‘Energy Efficiency Standards for New Federal Commercial and Multi-Family High- Rise Residential Buildings’ Baseline Standards Update  

Broader source: Energy.gov [DOE]

The EA examines the potential incremental environmental impacts of the PreliminaryFinal Rule on building habitability and the outdoor environment. To identify the potential environmental impacts that may result from implementing the PreliminaryFinal Rule, DOE compared the PreliminaryFinal Rule with the “no-action alternative” of using the minimum requirements of the previous version of the Federal standard – 10 CFR Part 433 (referred to as the “no-action alternative”).

498

Laboratory Testing of Demand-Response Enabled Household Appliances  

SciTech Connect (OSTI)

With the advent of the Advanced Metering Infrastructure (AMI) systems capable of two-way communications between the utility's grid and the building, there has been significant effort in the Automated Home Energy Management (AHEM) industry to develop capabilities that allow residential building systems to respond to utility demand events by temporarily reducing their electricity usage. Major appliance manufacturers are following suit by developing Home Area Network (HAN)-tied appliance suites that can take signals from the home's 'smart meter,' a.k.a. AMI meter, and adjust their run cycles accordingly. There are numerous strategies that can be employed by household appliances to respond to demand-side management opportunities, and they could result in substantial reductions in electricity bills for the residents depending on the pricing structures used by the utilities to incent these types of responses.The first step to quantifying these end effects is to test these systems and their responses in simulated demand-response (DR) conditions while monitoring energy use and overall system performance.

Sparn, B.; Jin, X.; Earle, L.

2013-10-01T23:59:59.000Z

499

Load control in low voltage level of the electricity grid using CHP appliances  

E-Print Network [OSTI]

1 Load control in low voltage level of the electricity grid using µCHP appliances M.G.C. Bosman, V.g.c.bosman@utwente.nl Abstract--The introduction of µCHP (Combined Heat and Power) appliances and other means of distributed on the transformers and, thus, on the grid. In this work we study the influence of introducing µCHP appliances

Al Hanbali, Ahmad

500

National Energy Efficiency Evaluation, Measurement and Verification (EM&V) Standard: Scoping Study of Issues and Implementation Requirements  

E-Print Network [OSTI]

rebatesincentives/ief/ PJM Forward Market Operations 2010. "PJM Manual 18B: Energy Efficiency Measurement &Independent System Operator 13 and PJM Regional Transmission

Schiller, Steven R.

2011-01-01T23:59:59.000Z