National Library of Energy BETA

Sample records for apartment cfl coffeemaker

  1. APART

    Energy Science and Technology Software Center (OSTI)

    002662MLTPL00 Automated Pre-processing for NMR Assignments with Reduced Tedium http://sir.lanl.gov/APART.htm

  2. CFL Lightbulbs | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    File CFL lightbulbs - high-resolution EPS

  3. CFL Lightbulbs | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Image icon CFL lightbulbs - high-resolution JPG.

  4. Earth-sheltered apartments

    SciTech Connect (OSTI)

    Germer, J.

    1984-12-01

    Earth-sheltered apartments for students at St. Johns University, Collegeville, MN are described. The intent was to provide energy-efficient, low maintenance housing in a neighborhood environment for the students. Students would learn about energy-conscious architecture from living in the buildings. The buildings have had few problems, but energy performance has not been up to expectations. The consumption of electricity exceeded predictions by 49%. The most likely answer to the problem is deviation from design. Several items of energy-efficient design were specified but deleted in order to cut costs.

  5. U.S. Department of Energy Implements More Stringent Criteria for ENERGY STAR® Clothes Washers, Expands CFL Program

    Broader source: Energy.gov [DOE]

    WASHINGTON, DC - The U.S. Department of Energy (DOE) today announced more stringent criteria for clothes washers and expanded the categories of compact fluorescent lightbulbs (CFL) under the ENERGY...

  6. Building America Case Study: Apartment Compartmentalization with...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Three methods were used to evaluate the success of the aerosolized sealant: blower door testing of overall apartment leakage before and after sealing, point-source testing of ...

  7. Cascade Apartments - Deep Energy Multifamily Retrofit , Kent...

    Energy Savers [EERE]

    ... leakage from dense wall pack insulation and from window and door retrofts. Assigning air leakage reductions to insulation, window and door retrofts in multifamily apartment is a ...

  8. LAX XXlCfl jX?iK, Idd+?KYLViG?IA

    Office of Legacy Management (LM)

    f , : I~&l, samtier cipwati8Aa CffUm - . Jiux.lCJ d,# 1754 - - _- - .- t :; . Jesse e. ahizmn*~*ter -2.' -------- - _ &tV' hi@A l f izau Bkteriala ;' . . 1 -7 I _' i' . Fpr&G& r&Q Q,&& fu &fI& L;&& -l&d 2;,i' iI,;/Qi' rIGN CQ&GgJy p;E& p;~p>gyf LAX XXlCfl jX?iK, Idd+?KYLViG?IA i-icfer~~o is &o ta yaw rwarandu3;: l P iimwmbec L?, 1953, reque&in~ a d&q.&ti of khority tA A&sister prog= for th+zz developmrrrl,

  9. Building America Case Study: Conway Street Apartments, Greenfield...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Project Name: Conway Street Apartments: A Multifamily Deep ... America program is engineering the American home for ... LIGHTING, APPLIANCES, AND WATER HEATING * Solar thermal ...

  10. Klamath Apartment Buildings (13) Space Heating Low Temperature...

    Open Energy Info (EERE)

    (13) Space Heating Low Temperature Geothermal Facility Facility Klamath Apartment Buildings (13) Sector Geothermal energy Type Space Heating Location Klamath Falls, Oregon...

  11. Title: Ames Blue Alert- Wood Cabinet Falls Apart

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Ames Blue Alert- Wood Cabinet Falls Apart Lessons Learned Statement- Cumulative damage can cause a loss of structural integrity. When furnishings are repeatedly exposed to water,...

  12. Ventilation and occupant behavior in two apartment buildings

    SciTech Connect (OSTI)

    Diamond, R.C.; Modera, M.P.; Feustel, H.E.

    1986-10-01

    In this paper we approach the subject of ventilation and occupant behavior in multifamily buildings by asking three questions: (1) why and how do occupants interact with ventilation in an apartment building, (2) how does the physical environment (i.e., building characteristics and climate) affect the ventilation in an apartment, and (3) what methods can be used to answer the first two questions. To investigate these and related questions, two apartment buildings in Chicago were monitored during the 1985-1986 heating season. In addition to collecting data on energy consumption, outdoor temperature, wind speed, and indoor apartment temperatures, we conducted diagnostic measurements and occupant surveys in both buildings. The diagnostic tests measured leakage areas of the individual apartments, both through the exterior envelope and to other apartments. The measured leakage areas are used in conjunction with a multizone air flow model to simulate infiltration and internal air flows under different weather conditions. The occupants were questioned about their attitudes and behavior regarding the comfort, air quality, ventilation, and energy use of their apartments. This paper describes each of the research methods utilized, the results of these efforts, and conclusions that can be drawn about ventilation-occupant interactions in these apartment buildings. We found that there was minimal window opening during the winter, widespread use of auxiliary heating to control thermal comfort, and that the simulations show little outside air entry in the top-floor apartments during periods of low wind speeds. The major conclusion of this work is that a multi-disciplinary approach is required to understand or predict occupant-ventilation interactions. Such an approach must take into account the physical characteristics of the building and the climate, as well as the preferences and available options of the occupants.

  13. Apartment Hunting - Part II - Keeping those Energy Bills Down |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Apartment Hunting - Part II - Keeping those Energy Bills Down Apartment Hunting - Part II - Keeping those Energy Bills Down August 23, 2010 - 5:17pm Addthis Kyle Rudzinski Special Assistant to the Director of Technology Advancement and Outreach, EERE I recently went looking for a new apartment. And though my parents may say I'm stingy, I like to think I'm economical. Or better yet, I'm a bargain hunter. I asked myself three main questions when looking for my new place:

  14. How Do You Save Energy in Your Apartment or Rental?

    Broader source: Energy.gov [DOE]

    It's not always easy to find ways to save when you don't own your home, but there are simple things you can do to make your apartment or rental more comfortable and efficient.

  15. Building America Technology Solutions for New and Existing Homes: Apartment

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Compartmentalization with an Aerosol-Based Sealing Process | Department of Energy Apartment Compartmentalization with an Aerosol-Based Sealing Process Building America Technology Solutions for New and Existing Homes: Apartment Compartmentalization with an Aerosol-Based Sealing Process In this study, the Consortium for Advanced Residential Buildings team demonstrated the automated air sealing and compartmentalization of buildings through the use of an aerosolized sealant developed by the

  16. Apartment Compartmentalization With an Aerosol-Based Sealing Process

    SciTech Connect (OSTI)

    Maxwell, Sean; Berger, David; Harrington, Curtis

    2015-03-01

    The U.S. Department of Energy Building America Team, Consortium for Advanced Residential Buildings, sought to demonstrate this new technology application in a new construction multifamily building in Queens, New York. The effectiveness of the sealing process was evaluated by three methods: air leakage testing of overall apartment before-and-after sealing, point-source testing of individual leaks, and pressure measurements in the walls of an apartment during sealing.

  17. EIS-0050-S: Commercial and Apartment Conservation Service Program, Supplemental

    Broader source: Energy.gov [DOE]

    The Office of Buildings Energy Research and Development prepared this SEIS to analyze the potential environmental impacts resulting from national implementation of the Commercial and Apartment Conservation Service Program. This SEIS is a supplement to DOE/EIS-0050, Residential Conservation Service Program.

  18. Method for fabricating a substrate having spaced apart microcapillaries thereon

    DOE Patents [OSTI]

    Jarvis, E.E.

    1995-01-24

    Methods are disclosed for manufacturing a self-supporting substrate having a plurality of spaced-apart needles (spikes or microcapillaries) projecting upwardly from a major surface of the substrate. In a preferred method, metal is deposited onto a porous membrane such that the metal extends into the pores, after which the membrane is dissolved. 9 figures.

  19. Apartment Compartmentalization With an Aerosol-Based Sealing Process

    SciTech Connect (OSTI)

    Maxwell, S.; Berger, D.; Harrington, C.

    2015-03-01

    Air sealing of building enclosures is a difficult and time-consuming process. Current methods in new construction require laborers to physically locate small and sometimes large holes in multiple assemblies and then manually seal each of them. The innovation demonstrated under this research study was the automated air sealing and compartmentalization of buildings through the use of an aerosolized sealant, developed by the Western Cooling Efficiency Center at University of California Davis. CARB sought to demonstrate this new technology application in a multifamily building in Queens, NY. The effectiveness of the sealing process was evaluated by three methods: air leakage testing of overall apartment before and after sealing, point-source testing of individual leaks, and pressure measurements in the walls of the target apartment during sealing.

  20. Indoor Environmental Quality Benefits of Apartment Energy Retrofits

    SciTech Connect (OSTI)

    Noris, Federico; Adamkiewicz, Gary; Delp, William W.; Hotchi, Toshifumi; Russell, Marion; Singer, Brett C.; Spears, Michael; Vermeer, Kimberly; Fisk, William J.

    2013-06-01

    Sixteen apartments serving low-income populations in three buildings were retrofit with the goal of simultaneously reducing energy consumption and improving indoor environmental quality (IEQ). Retrofit measures varied among apartments and included, among others, envelope sealing, installation of continuous mechanical ventilation systems, upgrading bathroom fans and range hoods, attic insulation, replacement of heating and cooling systems, and adding wall-mounted particle air cleaners. IEQ parameters were measured, generally for two one-week periods before and after the retrofits. The measurements indicate an overall improvement in IEQ conditions after the retrofits. Comfort conditions, bathroom humidity, and concentrations of carbon dioxide, acetaldehyde, volatile organic compounds, and particles generally improved. Formaldehyde and nitrogen dioxide levels decreased in the building with the highest concentrations, were unchanged in a second building, and increased in a third building. IEQ parameters other than particles improved more in apartments with continuous mechanical ventilation systems installed. In general, but not consistently, larger percent increases in air exchange rates were associated with larger percent decreases in indoor levels of the pollutants that primarily come from indoor sources.

  1. ITP Industrial Distributed Energy: Boa Vista Apartments: New Bedford Housing Authority/ New Bedford, MA

    Broader source: Energy.gov [DOE]

    Overview of Boa Vista Apartments housing development, with CHP system to provide electricity and hot water.

  2. Newporter Apartments. Deep Energy Retrofit Short Term Results

    SciTech Connect (OSTI)

    Gordon, Andrew; Howard, Luke; Kunkle, Rick; Lubliner, Michael; Auer, Dan; Clegg, Zach

    2012-12-01

    This project demonstrates a path to meet the goal of the Building America program to reduce home energy use by 30% in multi-family buildings. The project demonstrates cost-effective energy savings targets as well as improved comfort and indoor environmental quality (IEQ) associated with deep energy retrofits by a large public housing authority as part of a larger rehabilitation effort. The project focuses on a typical 1960’s vintage low-rise multi-family apartment community (120 units in three buildings).

  3. Newporter Apartments: Deep Energy Retrofit Short-Term Results

    SciTech Connect (OSTI)

    Gordon, A.; Howard, L.; Kunkle, R.; Lubliner, M.; Auer, D.; Clegg, Z.

    2012-12-01

    This project demonstrates a path to meet the goal of the Building America program to reduce home energy use by 30% in multi-family buildings. The project demonstrates cost effective energy savings targets as well as improved comfort and indoor environmental quality (IEQ) associated with deep energy retrofits by a large public housing authority as part of a larger rehabilitation effort. The project focuses on a typical 1960's vintage low-rise multi-family apartment community (120 units in three buildings).

  4. West Village Student Housing Phase I: Apartment Monitoring and Evaluation

    SciTech Connect (OSTI)

    German, A.; Bell, C.; Dakin, B.; Hoeschele, M.

    2014-06-01

    Building America team Alliance for Residential Building Innovation (ARBI) worked with the University of California, Davis (UC Davis) and the developer partner West Village Community Partnership (WVCP) to evaluate performance on 192 student apartments completed in September, 2011 as part of Phase I of the multi-purpose West Village project. West Village, the largest planned zero net energy community in the United States. The campus neighborhood is designed to enable faculty, staff and students to affordably live near campus, take advantage of environmentally friendly transportation options, and participate fully in campus life. The aggressive energy efficiency measures that are incorporated in the design contribute to source energy reductions of 37% over the B10 Benchmark. The energy efficiency measures that are incorporated into these apartments include increased wall & attic insulation, high performance windows, high efficiency heat pumps for heating and cooling, central heat pump water heaters (HPWHs), 100% high efficacy lighting, and ENERGY STAR major appliances. Results discuss how measured energy use compares to modeling estimates over a 10 month monitoring period and includes a cost effective evaluation.

  5. Idaho Site D&D Crew Uses Specialized Tools to Cut Apart Massive...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    D&D Crew Uses Specialized Tools to Cut Apart Massive Tank in Demolition Project Idaho Site D&D Crew Uses Specialized Tools to Cut Apart Massive Tank in Demolition Project November ...

  6. 01-02-2008 - Wood Cabinet Falls Apart | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    8 - Wood Cabinet Falls Apart Document Number: NA Effective Date: 012008 File (public): PDF icon 01-02-2008blue...

  7. West Village Student Housing Phase I: Apartment Monitoring and Evaluation

    SciTech Connect (OSTI)

    German, A.; Bell, C.; Dakin, B.; Hoeschele, M.

    2014-06-01

    Building America team Alliance for Residential Building Innovation (ARBI) worked with the University of California, Davis and the developer partner West Village Community Partnership (WVCP) to evaluate performance on 192 student apartments completed in September, 2011 as part of Phase I of the multi-purpose West Village project. West Village is the largest planned zero net energy community in the United States. The campus neighborhood is designed to enable faculty, staff, and students to affordably live near campus, take advantage of environmentally friendly transportation options, and participate fully in campus life. The aggressive energy efficiency measures that are incorporated in the design contribute to source energy reductions of 37% over the B10 Benchmark. These measures include increased wall and attic insulation, high performance windows, high efficiency heat pumps for heating and cooling, central heat pump water heaters (HPWHs), 100% high efficacy lighting, and ENERGY STAR major appliances. The report discusses how measured energy use compares to modeling estimates over a 10-month monitoring period and includes a cost effective evaluation.

  8. Idaho Site D&D Crew Uses Specialized Tools to Cut Apart Massive Tank in

    Energy Savers [EERE]

    Demolition Project | Department of Energy D&D Crew Uses Specialized Tools to Cut Apart Massive Tank in Demolition Project Idaho Site D&D Crew Uses Specialized Tools to Cut Apart Massive Tank in Demolition Project November 25, 2015 - 12:05pm Addthis A worker employs a thermal lance to cut apart a massive tank so it can be removed from a building slated for demolition at the Idaho Site's Materials and Fuels Complex. A worker employs a thermal lance to cut apart a massive tank so it can

  9. CFL Manufacturers: ENERGY STAR Letters

    Broader source: Energy.gov [DOE]

    DOE issued letters to 25 manufacturers of compact fluorescent lamps (CFLs) involving various models after PEARL Cycle 9 testing indicated that the models do not meet the ENERGY STAR specification and, therefore, are disqualified from the ENERGY STAR Program.

  10. Table HC1.1.4 Housing Unit Characteristics by Average Floorspace--Apartments, 2

    U.S. Energy Information Administration (EIA) Indexed Site

    4 Housing Unit Characteristics by Average Floorspace--Apartments, 2005" ,,,"Average Square Feet per Apartment in a --" ," Housing Units (millions)" ,,,"2 to 4 Unit Building",,,"5 or More Unit Building" ,,"Apartments (millions)" "Housing Unit Characteristics",,,"Total","Heated","Cooled","Total","Heated","Cooled" "Total",111.1,24.5,1090,902,341,872,780,441

  11. Table HC1.2.4 Living Space Characteristics by Average Floorspace--Apartments, 2

    U.S. Energy Information Administration (EIA) Indexed Site

    2.4 Living Space Characteristics by Average Floorspace--Apartments, 2005" ,,,"Average Square Feet per Apartment in a --" ," Housing Units (millions)" ,,,"2 to 4 Unit Building",,,"5 or More Unit Building" ,,"Apartments (millions)" "Living Space Characteristics",,,"Total","Heated","Cooled","Total","Heated","Cooled" "Total",111.1,24.5,1090,902,341,872,780,441

  12. Protocol for Maximizing Energy Savings and Indoor Environmental Quality Improvements when Retrofitting Apartments

    SciTech Connect (OSTI)

    Noris, Federico; Delp, William W.; Vermeer, Kimberly; Adamkiewicz, Gary; Singer, Brett C.; Fis, William J.

    2012-06-18

    The current focus on building energy retrofit provides an opportunity to simultaneously improve indoor environmental quality (IEQ). Toward this end, we developed a protocol for selecting packages of retrofits that both save energy and improve IEQ in apartments. The protocol specifies the methodology for selecting retrofits from a candidate list while addressing expected energy savings, IEQ impacts, and costs in an integrated manner. Interviews, inspections and measurements are specified to collect the needed input information. The protocol was applied to 17 apartments in three buildings in two different climates within California. Diagnostic measurements and surveys conducted before and after retrofit implementation indicate enhanced apartment performance.

  13. Protocol for maximizing energy savings and indoor environmental quality improvements when retrofitting apartments

    SciTech Connect (OSTI)

    Noris, Federico; Delp, William W.; Vermeer, Kimberly; Adamkiewicz, Gary; Singer, Brett C.; Fisk, William J.

    2013-06-01

    The current focus on building energy retrofit provides an opportunity to simultaneously improve indoor environmental quality (IEQ). Toward this end, we developed a protocol for selecting packages of retrofits that both save energy and improve IEQ in apartments. The protocol specifies the methodology for selecting retrofits from a candidate list while addressing expected energy savings, IEQ impacts, and costs in an integrated manner. Interviews, inspections and measurements are specified to collect the needed input information. The protocol was applied to 17 apartments in three buildings in two different climates within California. Diagnostic measurements and surveys conducted before and after retrofit implementation indicate enhanced apartment performance.

  14. Technology Solutions Case Study: Apartment Compartmentalization with an Aerosol-Based Sealing Process

    SciTech Connect (OSTI)

    2015-07-01

    Air sealing of building enclosures is a difficult and time-consuming process. Current methods in new construction require laborers to physically locate small and sometimes large holes in multiple assemblies and then manually seal each of them. This research study by Building America team Consortium for Advanced Residential Buildings demonstrated the automated air sealing and compartmentalization of buildings through the use of an aerosolized sealant developed by the Western Cooling Efficiency Center at University of California Davis. CARB demonstrated this new technology application in a multifamily building in Queens, NY. The effectiveness of the sealing process was evaluated by three methods: air leakage testing of overall apartment before and after sealing, point-source testing of individual leaks, and pressure measurements in the walls of the target apartment during sealing. Aerosolized sealing was successful by several measures in this study. Many individual leaks that are labor-intensive to address separately were well sealed by the aerosol particles. In addition, many diffuse leaks that are difficult to identify and treat were also sealed. The aerosol-based sealing process resulted in an average reduction of 71% in air leakage across three apartments and an average apartment airtightness of 0.08 CFM50/SF of enclosure area.

  15. Building America Whole-House Solutions for Existing Homes: Conway Street Apartments- Greenfield, Massachusetts

    Broader source: Energy.gov [DOE]

    Through recent research efforts, CARB has been evaluating strategies and technologies that can make dramatic improvements in energy performance in multifamily buildings. In this project, the team helped to transform a 100-year-old empty school building into 12 high performance apartments with low energy costs. The advanced features included an excellent thermal envelope of closed-cell spray foam and triple-pane windows, ductless heat pumps, solar thermal hot water system, and photovoltaic system.

  16. Existing Whole-House Solutions Case Study: Conway Street Apartments - Greenfield, Massachusetts

    SciTech Connect (OSTI)

    2014-12-01

    Through recent research efforts, CARB has been evaluating strategies and technologies that can make dramatic improvements in energy performance in multifamily buildings. In this project, the team helped to transform a 100-year-old empty school building into 12 high performance apartments with low energy costs. The advanced features included an excellent thermal envelope of closed-cell spray foam and triple-pane windows, ductless heat pumps, solar thermal hot water system, and photovoltaic system.

  17. Microsoft Word - Residential CFL Final_072210

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ATTRIBUTES AVERAGE INSTALLATION RATE FUEL TYPE (SPACE HEATING) Electricity (N74) 60% Natural Gas (N20) 76% Propane (N41) 55% Wood (N42) 65% Other (N16) 80% FUEL TYPE (WATER...

  18. Progress Energy Carolinas- CFL Rebate Program

    Broader source: Energy.gov [DOE]

    Progress Energy is working with lighting manufacturers and local retailers to offer discounted pricing on CFLs. The residential lighting program at Progress Energy's gives discounts at over 400...

  19. Critical Question #4: What are the Best Off-the-Shelf HVAC Solutions for Low-Load, High-Performance Homes and Apartments?

    Broader source: Energy.gov [DOE]

    What is currently in the market? What are the limitations of these systems? What are the desired specifications for these systems? What are the realistic space conditioning loads of these high-performance homes and apartments?

  20. Building America Case Study: Apartment Compartmentalization with an Aerosol-Based Sealing Process - Queens, NY; Technology Solutions for New and Existing Homes, Energy Efficiency & Renewable Energy (EERE)

    SciTech Connect (OSTI)

    2015-07-01

    Air sealing of building enclosures is a difficult and time-consuming process. Current methods in new construction require laborers to physically locate small and sometimes large holes in multiple assemblies and then manually seal each of them. The innovation demonstrated under this research study was the automated air sealing and compartmentalization of buildings through the use of an aerosolized sealant, developed by the Western Cooling Efficiency Center at University of California Davis.
    CARB sought to demonstrate this new technology application in a multifamily building in Queens, NY. The effectiveness of the sealing process was evaluated by three methods: air leakage testing of overall apartment before and after sealing, point-source testing of individual leaks, and pressure measurements in the walls of the target apartment during sealing. Aerosolized sealing was successful by several measures in this study. Many individual leaks that are labor-intensive to address separately were well sealed by the aerosol particles. In addition, many diffuse leaks that are difficult to identify and treat were also sealed. The aerosol-based sealing process resulted in an average reduction of 71% in air leakage across three apartments and an average apartment airtightness of 0.08 CFM50/SF of enclosure area.

  1. LED Lighting: Applying Lessons Learned from the CFL Experience

    SciTech Connect (OSTI)

    McCullough, Jeffrey J.; Gilbride, Theresa L.; Gordon, Kelly L.; Ledbetter, Marc R.; Sandahl, Linda J.; Ton, My K.

    2008-08-20

    Light emitting diode (LED) technology has emerged as an exciting new lighting alternative with the potential for significant energy savings. There is concern, however, that white light LEDs for general illumination could take a long, bumpy course similar to another energy-efficient lighting technology – compact fluorescent lights (CFLs). Recognizing the significant potential energy-efficient lighting has to reduce U.S. energy consumption, Congress mandated in the Energy Policy Act of 2005 that the U.S. Department of Energy (DOE) develop Solid State Lighting (SSL) through a Next Generation Lighting Initiative. DOE’s first step was to analyze the market introduction of compact fluorescent lighting to determine what lessons could be learned to smooth the introduction of SSL in the United States (Sandahl et al. 2006). This paper summarizes applicable lessons learned from the market introduction of CFLs and describe how DOE and others are applying those lessons to speed the development and market introduction of energy-efficient LED lighting for general illumination applications. A description of the current state of LED technology and compares LEDs to incandescent, fluorescent, and halogen lights is also provided.

  2. Better than CFL? Dimmable LED Downlights in Hospitality Facilities Webinar

    Broader source: Energy.gov [DOE]

    LEDs represent less than 1% of the installed base of U.S. downlights, which in 2012 numbered about 700 million. In hospitality facilities, past efforts to reduce lighting energy use have mainly...

  3. Early Pennsylvanian wrenching along the Red River-Matador Arch: Formation of a pull-apart basin, Depocenter for Atokan to Lower Des Moines (bend) clastics, Cottle County, Texas

    SciTech Connect (OSTI)

    Stephens, W.C. Jr.; Gunn, R.D.

    1995-06-01

    Early Pennsylvanian wrenching along the Red River-Matador Arch (Tectonic Zone) created a braided series of en echelon faults and folds with associated pop-up structures and pull-apart basins. Local extension, or overstepping, in Southeast Cottle County, Texas, has produced the deepest pull-apart basin along the arch with over 10,000` of structural relief. The emerging Wichita-Amarillo Uplift, to the north, provided an abundant sediment source, which prograded rapidly southward as an alluvial fan-braided river complex. Exposure of basement rocks and lower Paleozoic sediments along the Red River-Matador Arch, also contributed to the basin fill. Syntectonic sedimentation led to the accumulation of over 6000` of Bend (Atoka-lower Des Moines) sediments within the basin. Deposition was dominated initially by alluvial fan to fluvial siliciclastics. As basin subsidence was further amplified by sediment loading, accommodation exceeded sedimentation capturing a large segment of the southward prograding Wichita-Amarillo derived clastic wedge. Encroachment of the late Atoka to lower Des Moines epeiric sea promoted further evolution of depositional environments to fan deltas, marine dominated clastics and, later, localized carbonate development. Type III kerogen rich organic shales produced abundant gas prone source rocks. The extreme depth of the basin combined with the local geothermal gradient provided for significant hydrocarbon generation. By early 1988 new well control helped revise previous stratigraphic correlation demonstrating a rapidly expanding lower Des Moines to Atokan section. The drilling of the Gunn Oil Company-Brothers No. 1 to a total depth of 10,301` in the Mississippian Chappel Limestone, encountered 2025` of Bend sediments, with 279` of gross Bend Conglomerate (162` of net pay). The Brothers No. 1 was potentialled on 11/19/89 with a CAOF of 6.0 MMCFD and filed as the field discovery for the Broken Bone (Bend Conglomerate) field.

  4. Reference Buildings by Building Type: Midrise Apartment

    Broader source: Energy.gov [DOE]

    In addition to the ZIP file for each building type, you can directly view the "scorecard" spreadsheet that summarizes the inputs and results for each location. This Microsoft Excel spreadsheet is also included in the ZIP file. For version 1.4, only the IDF file is included.

  5. Cascade Apartments: Deep Energy Multifamily Retrofit

    SciTech Connect (OSTI)

    Gordon, A.; Mattheis, L.; Kunkle, R.; Howard, L.; Lubliner, M.

    2014-02-01

    In December of 2009-10, King County Housing Authority (KCHA) implemented energy retrofit improvements in the Cascade multifamily community, located in Kent, Washington (marine climate.)This research effort involved significant coordination from stakeholders KCHA, WA State Department of Commerce, utility Puget Sound Energy, and Cascade tenants. This report focuses on the following three primary BA research questions : 1. What are the modeled energy savings using DOE low income weatherization approved TREAT software? 2. How did the modeled energy savings compare with measured energy savings from aggregate utility billing analysis? 3. What is the Savings to Investment Ratio (SIR) of the retrofit package after considering utility window incentives and KCHA capitol improvement funding.

  6. Cascade Apartments: Deep Energy Multifamily Retrofit

    SciTech Connect (OSTI)

    Gordon, A.; Mattheis, L.; Kunkle, R.; Howard, L.; Lubliner, M.

    2014-02-01

    In December of 2009-10, King County Housing Authority (KCHA) implemented energy retrofit improvements in the Cascade multifamily community, located in Kent, Washington (marine climate.)This research effort involved significant coordination from stakeholders KCHA, WA State Department of Commerce, utility Puget Sound Energy, and Cascade tenants. This report focuses on the following three primary BA research questions: 1. What are the modeled energy savings using DOE low income weatherization approved TREAT software? 2. How did the modeled energy savings compare with measured energy savings from aggregate utility billing analysis? 3. What is the Savings to Investment Ratio (SIR) of the retrofit package after considering utility window incentives and KCHA capitol improvement funding.

  7. Archived Reference Building Type: Midrise Apartment

    Broader source: Energy.gov [DOE]

    Here you will find past versions of the commercial reference building models for existing buildings constructed before 1980, organized by building type and location. A summary ofbuilding types and climate zonesis available for reference.Current versionsare also available.

  8. Archived Reference Building Type: Midrise Apartment

    Broader source: Energy.gov [DOE]

    Here you will find past versions of the commercial reference building models for existing buildings constructed in or after 1980, organized by building type and location. A summary of building types and climate zones is available for reference. Current versions are also available.

  9. Text-Alternative Version: Better than CFL? Dimmable LED Downlights in Hospitality Facilities Webinar

    Broader source: Energy.gov [DOE]

    Linda Sandahl: First, I’m very happy to welcome our speakers: Bob Davis of Pacific Northwest National Laboratory and Ardra Zinkon of Tec Studio.

  10. Retrospective North American CFL Experience Curve Analysis and Correlation to Deployment Programs

    Broader source: Energy.gov [DOE]

    This work documents our development of an analysis approach for deriving retrospective experience curves with a variable learning rate, and its application to develop an experience curve for compact fluorescent lamps for the global and North American markets over the years 1990-2007. Uncertainties and assumptions involved in interpreting data for our experience curve development are discussed, including the processing and transformation of empirical data, the selection of system boundaries, and the identification of historical changes in the learning rate over the course of 15 years.

  11. Retrospective North American CFL Experience Curve Analysis and Correlation to Deployment Programs

    SciTech Connect (OSTI)

    Smith, Sarah J.; Wei, Max; Sohn, Michael D.

    2015-07-01

    Retrospective experience curves are a useful tool for understanding historic technology development, and can contribute to investment program analysis and future cost estimation efforts. This work documents our development of an analysis approach for deriving retrospective experience curves with a variable learning rate, and its application to develop an experience curve for compact fluorescent lamps for the global and North American markets over the years 1990-2007. Uncertainties and assumptions involved in interpreting data for our experience curve development are discussed, including the processing and transformation of empirical data, the selection of system boundaries, and the identification of historical changes in the learning rate over the course of 15 years. In the results that follow, we find that that the learning rate has changed at least once from 1990-2007. We also explore if, and to what degree, public deployment programs may have contributed to an increased technology learning rate in North America. We observe correlations between the changes in the learning rate and the initiation of new policies, abrupt technological advances, including improvements to ballast technology, and economic and political events such as trade tariffs and electricity prices. Finally, we discuss how the findings of this work (1) support the use of segmented experience curves for retrospective and prospective analysis and (2) may imply that investments in technological research and development have contributed to a change in market adoption and penetration.

  12. CFL Labeling Harmonization in the United States, China, Brazil andELI Member Countries: Specifications, Testing, and MutualRecognition

    SciTech Connect (OSTI)

    Fridley, David; Lin, Jiang; Denver, Andrea; Biermayer, Peter; Dillavou, Tyler

    2005-07-20

    This report examines critical differences among energy-efficient labeling programs for CFLs in Brazil, China, the United States, and the seven members of the international Efficient Lighting Initiative (ELI) in terms of technical specifications and test procedures, and review issues related to international harmonization of these standards.

  13. Stay Warm in Your Apartment | Department of Energy

    Energy Savers [EERE]

    Speaking Programs Speaking Programs By inviting presenters from a wide range of public and private sector organizations, the Department is encouraging the transformation of government and the increased efficiency and resilience of organizations to meet our agency mission and national security responsibilities. This includes understanding the depth of global issues, the need for change, the tools and steps of transformation, utilizing the most appropriate performance measures to determine

  14. Conway Street Apartments: A Multifamily Deep Energy Retrofit

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    this effort. viii Definitions AFUE Annual Fuel Utilization Efficiency BEopt(tm) Building Energy Optimization Software CARB Consortium for Advanced Residential Buildings CFM Cubic...

  15. Cascade Apartments - Deep Energy Multifamily Retrofit , Kent, Washington (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2014-02-01

    In December of 2009-10, King County Housing Authority (KCHA) implemented energy retrofit improvements in the Cascade multifamily community, located in Kent, Washington (marine climate.)This research effort involved significant coordination from stakeholders KCHA, WA State Department of Commerce, utility Puget Sound Energy, and Cascade tenants. This report focuses on the following three primary BA research questions : 1. What are the modeled energy savings using DOE low income weatherization approved TREAT software? 2. How did the modeled energy savings compare with measured energy savings from aggregate utility billing analysis? 3. What is the Savings to Investment Ratio (SIR) of the retrofit package after considering utility window incentives and KCHA capitol improvement funding.

  16. Conway Street Apartments: A Multifamily Deep Energy Retrofit

    SciTech Connect (OSTI)

    Aldrich, R.; Williamson, J.

    2014-11-01

    While single-family, detached homes account for 63% of households (EIA 2009); multi-family homes account for a very large portion of that remaining housing stock, and this fraction is growing. Through recent research efforts, CARB has been evaluating strategies and technologies that can make dramatic improvements in energy performance in multi-family buildings.

  17. Conway Street Apartments: A Multifamily Deep Energy Retrofit...

    Office of Scientific and Technical Information (OSTI)

    for Advanced Residential Buildings (CARB), Norwalk, Connecticut Research Org: National Renewable Energy Laboratory (NREL), Golden, CO. Sponsoring Org: USDOE Office of Energy...

  18. Conway Street Apartments: A Multifamily Deep Energy Retrofit...

    Office of Scientific and Technical Information (OSTI)

    CONSORTIUM FOR ADVANCED RESIDENTIAL BUILDINGS; MULTIFAMILY; RETROFIT; ZERO ENERGY; SOLAR THERMAL; DRAIN WATER RECOVERY SYSTEM; DEMAND-CONTROLLED RECIRCULATION SYSTEM; BRICK;...

  19. Energy-Saving Incandescents | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    File Energy-saving incandescent lightbulbs - high-resolution EPS More Documents & Publications Energy-Saving Incandescents CFL Lightbulbs CFL Lightbulbs

  20. Owatonna Public Utilities - Residential Conserve and Save Rebate...

    Broader source: Energy.gov (indexed) [DOE]

    unit Dishwashers: 25 RefrigeratorsFreezers: 25 RefrigeratorFreezer Recycling: 15 Room Air Conditioners: 25 Room AC Recycling: 15 CFL Bulbs: 50% of cost CFL Light...

  1. Easy Energy Tips for Apartments or Rental Homes | Department of Energy

    Energy Savers [EERE]

    Earth Day Earth Day If you do not see the event begin at 3pm ET, please refresh your browser. Are you looking for ways to go green while saving yourself some green? Or are you interested in learning how to incorporate renewable energy options -- like solar, wind and geothermal -- into your home? This Earth Day, hang out with Energy Department experts to learn how you can reduce your energy use, improve your home's comfort and cut your energy bills. We hope you'll join us on April 22 at 3 pm ET

  2. Apartment Hunting with an Eye to Energy Savings: Part I | Department of

    Energy Savers [EERE]

    Department of Energy Analysis of LM Stakeholder Interaction and External Communications Analysis of LM Stakeholder Interaction and External Communications The U.S. Department of Energy (DOE) Office of Legacy Management (LM) makes every effort to communicate with its stakeholders through public and small group meetings, conferences, briefings, news releases, telephone, email, informational materials, and the LM website. To assess the effectiveness of LM's communication with stakeholders

  3. Existing Whole-House Solutions Case Study: Cascade Apartments - Deep Energy Multifamily Retrofit

    SciTech Connect (OSTI)

    2014-02-01

    In December of 2009-10, King County Housing Authority (KCHA) implemented energy retrofit improvements in the Cascade multifamily community, located in Kent, Washington, which resulted in annual energy cost savings of 22%, improved comfort and air quality for residents, and increased durability of the units. This research effort involved significant coordination from stakeholders KCHA, WA State Department of Commerce, utility Puget Sound Energy, and Cascade tenants. This report focuses on the following three primary Building America research questions: 1. What are the modeled energy savings using DOE low income weatherization approved TREAT software? 2. How did the modeled energy savings compare with measured energy savings from aggregate utility billing analysis? 3. What is the Savings to Investment Ratio of the retrofit package after considering utility window incentives and KCHA capital improvement funding.

  4. Pull-Apart in Strike-Slip Fault Zone | Open Energy Information

    Open Energy Info (EERE)

    of sinistral fault systems, resulting in localized crustal extension and enhanced permeability. Other definitions:Wikipedia Reegle Controlling Structures List of controlling...

  5. Non-Residential Solar Water Heating Site Assessment at Milwaukee Apartment Buildings

    Office of Energy Efficiency and Renewable Energy (EERE)

    The Midwest Renewable Energy Association's certified site assessors conducted 25 site assessments under a subcontract with NREL in 2009. The attached is one of the SHW assessments.

  6. Building America Case Study: Conway Street Apartments, Greenfield, Massachusetts (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2014-12-01

    While single-family, detached homes account for 63% of households (EIA 2009); multi-family homes account for a very large portion of that remaining housing stock, and this fraction is growing. Through recent research efforts, CARB has been evaluating strategies and technologies that can make dramatic improvements in energy performance in multi-family buildings

  7. Catalysts on the Cusp of Coming Apart | U.S. DOE Office of Science...

    Office of Science (SC) Website

    Catalysts are molecular "machines" that speed chemical reactions. They are used by both ... For example, Ted developed a program to show minority students how to design careers in ...

  8. Native Village of Unalakleet - Feasability Study for Retrofit of 14 Apartment Complexes

    Energy Savers [EERE]

  9. Building America Whole-House Solutions for Existing Homes: Cascade Apartments- Deep Energy Multifamily Retrofit (Fact Sheet)

    Broader source: Energy.gov [DOE]

    In December of 2009-10, King County Housing Authority implemented energy retrofit improvements in the Cascade multifamily community, located in Kent, Washington, which resulted in annual energy cost savings of 22%, improved comfort and air quality for residents, and increased durability of the units.

  10. Method and apparatus for fabrication of high gradient insulators with parallel surface conductors spaced less than one millimeter apart

    DOE Patents [OSTI]

    Sanders, David M. (Livermore, CA); Decker, Derek E. (Livermore, CA)

    1999-01-01

    Optical patterns and lithographic techniques are used as part of a process to embed parallel and evenly spaced conductors in the non-planar surfaces of an insulator to produce high gradient insulators. The approach extends the size that high gradient insulating structures can be fabricated as well as improves the performance of those insulators by reducing the scale of the alternating parallel lines of insulator and conductor along the surface. This fabrication approach also substantially decreases the cost required to produce high gradient insulators.

  11. FirstEnergy (Potomac Edison) - Commercial and Industrial Efficiency...

    Broader source: Energy.gov (indexed) [DOE]

    CFL Fixture: 25 Screw-In CFL Fixture: 1 LED Exit Sign: 25 Lighting Controls: 25sensor Standard Lighting T8T5 Fixtures (Replacements): 10 - 65fixture Permanent Delamping...

  12. Tax Credits, Rebates & Savings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    addition to CFL fixtures which are covered at 50% of the purchase price, fixtures and signage are also eligible for rebates up... Eligibility: Commercial, Local Government,...

  13. Tax Credits, Rebates & Savings | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Plant (CMLP) offers rebates to commercial customers for a variety of appliances, ETS heating systems, general lighting upgrades, CFL bulbs, and exit sign retrofit kits. A......

  14. Tax Credits, Rebates & Savings | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    install energy efficiency measures in Xcel service territory. Rebates are available for evaporative cooling systems, LED light bulbs, and CFL light bulbs. All equipment must meet...

  15. Tax Credits, Rebates & Savings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    in Xcel service territory. Rebates are available for evaporative cooling systems, LED light bulbs, and CFL light bulbs. All equipment must meet program requirements....

  16. Videocon Industries Ltd | Open Energy Information

    Open Energy Info (EERE)

    in consumer electronics and home appliances; foraying into CFL bulb and solar inverters. Coordinates: 24.60642, 88.06496 Show Map Loading map... "minzoom":false,"mappi...

  17. Rocky Mountain Power - FinAnswer Express | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Only Interior Lighting: 0.08kwh annual energy savings LED Fixture (Exterior): 100 Induction Fixture (Exterior): 125 CFL Wallpack (Exterior): 30 Lighting Control (Exterior):...

  18. Tax Credits, Rebates & Savings | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    rebates to residences for heat pump water heaters, central air conditioning systems, washers, refrigerators, ceiling fans, CFL light bulbs and equipment maintenance. These...

  19. DOE February 2012 ECS Report to Congress

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    and refrigerator-freezers, fluorescent lamp ballasts, and direct heating equipment, ... Draft for Vote CFL - Compact Fluorescent Lamp DOE - U.S. Department of Energy EISA 2007- ...

  20. Energy 101: Lighting Choices | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Upgrading 15 of the inefficient incandescent light bulbs in your home to energy-saving incandescent, compact fluorescent lamp (CFL), or light emitting diode (LED) bulbs could save ...

  1. General Service LED Lamps

    Broader source: Energy.gov [DOE]

    A U.S. DOE SSL technology fact sheet that compares general service LED light bulbs with incandescent and CFL bulbs.

  2. Intematix Corporation | Open Energy Information

    Open Energy Info (EERE)

    Zip: 94538 Product: Develops phosphor materials for energy efficient lighting, including LED, CCFL, and CFL 's. Coordinates: 44.2605, -88.880509 Show Map Loading map......

  3. Residential Energy Efficiency Rebate Program | Department of...

    Broader source: Energy.gov (indexed) [DOE]

    Hawaii Energy Website http:www.hawaiienergy.comrebates State Hawaii Program Type Rebate Program Rebate Amount CFL Bulbs: Instant in-store rebates Heat Pump Water...

  4. Tax Credits, Rebates & Savings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    newly constructed buildings and custom measures. Appliance rebates range from 25 - 50, provided that all equipment requirements have been met. In addition to CFL...

  5. Tax Credits, Rebates & Savings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    equipment requirements have been met. In addition to CFL fixtures which are covered at 50% of the purchase price, fixtures and signage are also eligible for rebates up......

  6. Study: Environmental Benefits of LEDs Greater Than CFLs | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    to date. The study - which evaluated not only the use but also the manufacturing, transport, and disposal of LED, CFL, and incandescent lamps throughout each product...

  7. General Service LED Lamps

    SciTech Connect (OSTI)

    2012-04-01

    Solid-state lighting program technology fact sheet that compares general service incandescent lamps—i.e., light bulbs—to LED and CFL alternatives.

  8. First Energy Ohio - Residential Efficiency Rebates | Department...

    Broader source: Energy.gov (indexed) [DOE]

    25unit Ceiling Fan CFL Light Combination: 30 Torchiere Floor Lamps: 10 Heat Pump Water Heaters: 250 Electric Water Heaters: 100 HVAC Tune Up: 25 Central AC: 150...

  9. Tax Credits, Rebates & Savings | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Hawaii Energy provides rebates to residences for heat pump water heaters, central air conditioning systems, washers, refrigerators, ceiling fans, CFL light bulbs and equipment...

  10. Life-Cycle Assessment of Energy and Environmental Impacts of...

    Office of Scientific and Technical Information (OSTI)

    Hollomon, Brad; Dillon, Heather E.; Snowden-Swan, Lesley J. LED; light-emitting diode; CFL; incandescent; halogen; lamp; bulb; TCLP; STLC; TTLC; WET; hazardous waste; electronic...

  11. "Title","Creator/Author","Publication Date","OSTI Identifier...

    Office of Scientific and Technical Information (OSTI)

    National Laboratory (PNNL), Richland, WA (US)","USDOE","LED; light-emitting diode; CFL; incandescent; halogen; lamp; bulb; TCLP; STLC; TTLC; WET; hazardous waste; electronic...

  12. Life-Cycle Assessment of Energy and Environmental Impacts of LED Lighting Products

    Broader source: Energy.gov [DOE]

    This March 28, 2013 webcast reviewed DOE's recently completed three-part study of the life-cycle energy and environmental impacts of LED lighting products relative to incandescent and CFL...

  13. Energy-Saving Incandescents | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Image icon Energy-saving incandescent lighbulbs - high-resolution JPG More Documents & Publications Energy-Saving Incandescents CFL Lightbulbs Which Bulb Is Right for You? (High-Resolution JPG Billboard)

  14. NIPSCO Small Business Direct Install Electric and Natural Gas Program

    Broader source: Energy.gov [DOE]

    NIPSCO's Small Business Direct Install Program is designed to help small businesses minimize energy costs, and provides energy-saving CFL lighting, showerheads and faucet aerators at no added cost.

  15. DOE Requires Westinghouse to Cease Sales of Two Light Bulb Models and Allows Sale of Another

    Broader source: Energy.gov [DOE]

    As a part of DOE's continuing enforcement action against Westinghouse Lighting Corporation, the company must cease sales of two light bulb models - medium based CFL basic model 15GLOBE/65/2 ...

  16. School Energy Survey Student Guide

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of 40 new power plants. INCANDESCENT BULB HALOGEN COMPACT FLUORESCENT (CFL) LIGHT EMITTING DIODE (LED) Brightness 850 lumens 850 lumens 850 lumens 850 lumens Life of Bulb 1,000...

  17. School Energy Survey Teacher Guide

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Key Student Guide Page 20 INCANDESCENT BULB HALOGEN COMPACT FLUORESCENT (CFL) LIGHT EMITTING DIODE (LED) Number of bulbs to get 25,000 hours 25 8.3 2.5 1 Cost of bulbs for 25,000...

  18. L2:THM.P4.01 Rob Lowrie LANL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... large-eddy simulation (ILES), detached-eddy simulation (DES), and Spalart-Allmaras (SA). ... Table 7: Averaged time-step based on a fixed-CFL number used for the SA calculations. ...

  19. TCP: Order (2011-CE-3501)

    Broader source: Energy.gov [DOE]

    DOE ordered Technical Consumer Products, Inc. to pay a $3,000 civil penalty after finding TCP had failed to certify that a certain model of medium base compact fluorescent lamp (CFL) complies with the applicable energy conservation standards.

  20. DOE Zero Ready Home Case Study: Brookside Development, Singer...

    Energy Savers [EERE]

    ... MERV 10 filter * Hot Water: Tankless gas; EF 0.92 * Lighting: 10% LED; 90% CFL; ... Mortgage Amount 1,869 1,824 1,803 1,499 1,257 Insurance 100 100 100 100 100 ...

  1. Rocky Mountain Power - FinAnswer Express | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Program Type Rebate Program Rebate Amount Interior Lighting: 0.08kWh annual savings Induction Fixture (Exterior): 125unit LED OutdoorRoadway Fixture (Exterior): 100unit CFL...

  2. Snohomish County PUD No 1- Residential Energy Efficiency Rebate Program

    Broader source: Energy.gov [DOE]

    To help customers remodeling or building a new home reduce lighting energy use, Snohomish County PUD No 1 offers a discount of $20 on a variety of CFL fixtures at participating local retailers. A...

  3. Energy Efficiency and Renewable Energy Technologies for Alaska

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... bulbs 60 watts 2,820 watts CFL bulbs 14 watts 658 watts LED bulbs 9.5 watts 446.5 watts Lighting using kilowatt price of 12 cents * Monthly Cost of Using Incandescent Light ...

  4. Cheyenne Light, Fuel and Power (Electric)- Residential Energy Efficiency Rebate Program

    Broader source: Energy.gov [DOE]

    Cheyenne Light, Fuel and Power offers incentives to electric customers who wish to install energy efficient equipment in participating homes. Incentives are available for CFL and LED light bulbs,...

  5. DOE-SR Makes a Difference Through Donation to Educational Center

    Broader source: Energy.gov [DOE]

    Aiken, SC -- The Department of Energy-Savannah River Operations Office (DOE-SR) is making a real impact to increase learning resources for an educational nonprofit organization through its Computers for Learning (CFL) program.

  6. VIDEO: Bringing This Year's Energy Pumpkins to Life | Department...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    to the test and carved some energy pumpkins of our own. In the video above, see a CFL, solar panels, an atom and a wind turbine come to life in spooky, candlelit time-lapse --...

  7. Energy Pumpkins | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    to try out our energy-themed pumpkin carving stencils. In our video, see a CFL, solar panels, an atom and a wind turbine come to life in spooky, candlelit time-lapse -- plus a ...

  8. DOE Zero Energy Ready Home Case Study: The Imery Group, Serenbe...

    Energy Savers [EERE]

    monitoring equipment tracks the PV, solar thermal water heater, ERV, mini-split heat pump with 3 indoor heads, solar water heater, and LED and CFL lighting. PDF icon...

  9. Randolph EMC- Agricultural Efficient Lighting Rebate Program

    Broader source: Energy.gov [DOE]

    Agricultural members of Randolph EMC (REMC) who upgrade to energy-efficientCFL bulbs in agricultural facilities are eligible for an incentive to help cover the initial cost of installation. The...

  10. TITLE AUTHORS SUBJECT SUBJECT RELATED DESCRIPTION PUBLISHER AVAILABILI...

    Office of Scientific and Technical Information (OSTI)

    Jason R Hollomon Brad Dillon Heather E Snowden Swan Lesley J LED light emitting diode CFL incandescent halogen lamp bulb TCLP STLC TTLC WET hazardous waste electronic waste e...

  11. PowerPoint Presentation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    41 51 61 INCANDESCENT HALOGEN CFL LED 0 500 1,000 1,500 2,000 2,500 COUNCIL BASELINE MARKET AVERAGE TYPE: CURRENT PRACTICE BASELINE EFFICACY Linear Fluorescent Lamps, 4ft...

  12. Zero energy-storage ballast for compact fluorescent lamps

    DOE Patents [OSTI]

    Schultz, William Newell (Niskayuna, NY); Thomas, Robert James (Rexford, NY)

    1999-01-01

    A CFL ballast includes complementary-type switching devices connected in series with their gates connected together at a control node. The switching devices supply a resonant tank circuit which is tuned to a frequency near, but slightly lower than, the resonant frequency of a resonant control circuit. As a result, the tank circuit restarts oscillations immediately following each zero crossing of the bus voltage. Such rapid restarts avoid undesirable flickering while maintaining the operational advantages and high efficacy of the CFL ballast.

  13. CALiPER Retail Lamps Study 3.2: Lumen and Chromaticity Maintenance of LED A Lamps Operated in Steady-State Conditions

    SciTech Connect (OSTI)

    none,

    2014-12-31

    This CALiPER report examines lumen depreciation and color shift of 17 different A lamps in steady-state conditions (15 LED, 1 CFL, 1 halogen). The goal of this investigation was to examine the long-term performance of complete LED lamps relative to benchmark halogen and CFL lamps—in this case, A lamps emitting approximately 800 lumens operated continuously at a relatively high ambient temperature of 45°C.

  14. Energy efficient alternatives to halogen torchieres

    SciTech Connect (OSTI)

    Siminovitch, M.; Marr, L.; Mitchell, J.; Page, E.

    1997-03-01

    A series of novel energy efficient torchiere systems have been developed using compact fluorescent lamps (CFLs). These systems were studied photometrically and compared with the performance of traditional commercially available tungsten halogen sources. Gonio-photometric data and power assessments indicate that significant lighting energy savings can be obtained by utilizing CFL sources instead of standard tungsten halogen sources. This energy savings is jointly due to the higher source efficacy of the CFLs and the surprisingly poor performance of the imported 300 Watt halogen lamps. Experimental data shows that a 50 to 60 Watt CFL will effectively lumen match a variety of 300 Watt tungsten halogen sources with 5 to 10 times the efficacy. CFL torchieres have additional benefits of higher power quality and cooler lamp operating temperature, making them safer fixtures.

  15. Compact Fluorescent Plug-In Ballast-in-a-Socket

    SciTech Connect (OSTI)

    Rebecca Voelker

    2001-12-21

    The primary goal of this program was to develop a ballast system for plug-in CFLs (compact fluorescent lamps) that will directly replace standard metal shell, medium base incandescent lampholders (such as Levition No. 6098) for use with portable lamp fixtures, such as floor, table and desk lamps. A secondary goal was to identify a plug-in CFL that is optimized for use with this ballast. This Plug-in CFL Ballastin-a-Socket system will allow fixture manufacturers to easily manufacture CFL-based high-efficacy portable fixtures that provide residential and commercial consumers with attractive, cost-effective, and energy-efficient fixtures for use wherever portable incandescent fixtures are used today. The advantages of this proposed system over existing CFL solutions are that the fixtures can only be used with high-efficacy CFLs, and they will be more attractive and will have lower life-cycle costs than screw-in or adapter-based CFL retrofit solutions. These features should greatly increase the penetration of CFL's into the North American market. Our work has shown that using integrated circuits it is quite feasible to produce a lamp-fixture ballast of a size comparable to the current Edison-screw 3-way incandescent fixtures. As for price points for BIAS-based fixtures, end-users polled by the Lighting Research Institute at RPI indicated that they would pay as much as an additional $10 for a lamp containing such a ballast. The ballast has been optimized to run with a 26 W amalgam triple biax lamp in the base-down position, yet can accept non-amalgam versions of the lamp. With a few part alterations, the ballast can be produced to support 32 W lamps as well. The ballast uses GE's existing L-Comp[1] power topology in the circuit so that the integrated circuit design would be a design that could possibly be used by other CFL and EFL products with minor modifications. This gives added value by reducing cost and size of not only the BIAS, but also possibly other integral CFL and future dimmable integral and plug-in versions of the EFL products.

  16. Zero energy-storage ballast for compact fluorescent lamps

    DOE Patents [OSTI]

    Schultz, W.N.; Thomas, R.J.

    1999-08-31

    A CFL ballast includes complementary-type switching devices connected in series with their gates connected together at a control node. The switching devices supply a resonant tank circuit which is tuned to a frequency near, but slightly lower than, the resonant frequency of a resonant control circuit. As a result, the tank circuit restarts oscillations immediately following each zero crossing of the bus voltage. Such rapid restarts avoid undesirable flickering while maintaining the operational advantages and high efficacy of the CFL ballast. 4 figs.

  17. Building America Whole-House Solutions for New Homes: Schneider Homes, Burien, Washington

    Broader source: Energy.gov [DOE]

    Case study of Schneider Homes who worked with Building America research partner WSU Extension Energy Office to design HERS 65 homes with high-efficiency furnaces in an air- sealed garage closet with ducts in conditioned space, 80% CFL lighting, ENERGY STAR appliances, air-tight drywall, and air sealing of attic hatches.

  18. Slide 1

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    T R A T I O N Source of C & l Lighting Savings 3 10% 0% 6% 4% 14% 5% 8% 2% 51% T8 CFL Induction EHID High Bay T8 Non Standard Redesign Controls All LED B O N N E V I L L E P O W E...

  19. Sandia National Laboratories: Intern Housing Resources

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Apartment List Hotpads: Livermore, Pleasanton, Dublin Move MyApartmentMap.com Rent.com Zillow: Livermore, Pleasanton, Dublin Furniture rental These links offer information...

  20. " Million Housing Units, Final...

    U.S. Energy Information Administration (EIA) Indexed Site

    Final" ,,"Housing Unit Type" ,,"Single-Family Units",,"Apartments in Buildings With" ... ,,"RSEs for Housing Unit Type" ,,"Single-Family Units",,"Apartments in Buildings With" ...

  1. Building America Whole-House Solutions for Existing Homes: Cascade...

    Energy Savers [EERE]

    Homes: Cascade Apartments - Deep Energy Multifamily Retrofit (Fact Sheet) Building America Whole-House Solutions for Existing Homes: Cascade Apartments - Deep Energy Multifamily...

  2. Building America Technology Solutions for New and Existing Homes...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Apartment Compartmentalization with an Aerosol-Based Sealing Process Building America Technology Solutions for New and Existing Homes: Apartment Compartmentalization with an...

  3. CNS helps provide housing to homeless veterans | Y-12 National...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    second phase of the project is rehabilitating a former apartment complex off Washington Pike that will provide another 15 apartment homes. The three-building Washington Oaks...

  4. E

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... I,--,-.or -. - - - , . - - - En 7 nsa an , ; m a : Cfl j. Wf 4xSn ma a a rmO 00 00 700 0 r0 0 0 0 0 0O 0 0 0 * lC L A LA 5 A L ' A i A A A L o 1 4 1 A L l L A> A 11 C A j ...

  5. Lighting Developments to 2030

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Lighting Choices to Save You Money Lighting Choices to Save You Money This Energy 101 video explores the different lighting options available to consumers. Light your home using the same amount of light for less money. By replacing your home's five most frequently used light fixtures or bulbs with models that have earned the ENERGY STAR, you can save $75 each year. New lighting standards took effect in 2012, and money-saving options such as halogen incandescent, CFL, and LED lightbulbs are

  6. Next Generation Luminaire (NGL) Downlight Demonstration Project, Hilton Columbus Downtown

    SciTech Connect (OSTI)

    Davis, R. G.; Perrin, T. E.

    2014-09-30

    At the Hilton Columbus Downtown hotel in Ohio, DOE's Better Buildings Alliance conducted a demonstration of Next Generation Luminaires-winning downlights installed in all guest rooms and suites prior to the hotel's 2012 opening. After a post-occupancy assessment, the LED downlights not only provided the aesthetic appearance and dimming functionality desired, but also provided 50% energy savings relative to a comparable CFL downlight and enabled the lighting power to be more than 20% below that allowed by code.

  7. DATE:

    Broader source: Energy.gov (indexed) [DOE]

    Briefing for Media and Retailers - Lighting eere.energy.gov 1 Consumer Light Bulb Changes: Briefing and Resources for Media and Retailers Briefing for Media and Retailers - Lighting eere.energy.gov 2 * Briefing: - To schedule interviews, please contact DOE Public Affairs at 202-586-4940 * Terms: - Lumens: Commonly a measure of brightness (technically "luminous flux") - CFL: Compact Fluorescent Lamp: The curly fluorescent bulbs - LED: Light Emitting Diode: more recently emerging

  8. Lumen and Chromaticity Maintenance of LED PAR38 Lamps Operated in Steady-State Conditions

    SciTech Connect (OSTI)

    Royer, Michael P.

    2014-12-01

    The lumen depreciation and color shift of 38 different lamps (32 LED, 2 CFL, 1 ceramic metal halide [CMH], 3 halogen) were monitored in a specially developed automated long-term test apparatus (ALTA2) for nearly 14,000 hours. Five samples of each lamp model were tested, with measurements recorded on a weekly basis. The lamps were operated continuously at a target ambient temperature between 44°C and 45°C.

  9. Table lamp with dynamically controlled lighting distribution and uniformly illuminated luminous shade

    DOE Patents [OSTI]

    Siminovitch, Michael J.; Page, Erik R.

    2002-01-01

    A double lamp table or floor lamp lighting system has a pair of compact fluorescent lamps (CFLs) or other lamps arranged vertically, i.e. one lamp above the other, with a reflective septum in between. By selectively turning on one or both of the CFLs, down lighting, up lighting, or both up and down lighting is produced. The control system can also vary the light intensity from each CFL. The reflective septum ensures that almost all the light produced by each lamp will be directed into the desired light distribution pattern which is selected and easily changed by the user. In a particular configuration, the reflective septum is bowl shaped, with the upper CFL sitting in the bowl, and a luminous shade hanging down from the bowl. The lower CFL provides both task lighting and uniform shade luminance. Planar compact fluorescent lamps, e.g. circular CFLs, particularly oriented horizontally, are preferable. CFLs provide energy efficiency. However, other types of lamps, including incandescent, halogen, and LEDs can also be used in the fixture. The lighting system may be designed for the home, hospitality, office or other environments.

  10. spaceheat_household2001.pdf

    U.S. Energy Information Administration (EIA) Indexed Site

    Type of Rented Housing Unit RSE Row Factors Single-Family Apartments in Buildings With ... Type of Rented Housing Unit RSE Row Factors Single-Family Apartments in Buildings With ...

  11. ac_household2001.pdf

    U.S. Energy Information Administration (EIA) Indexed Site

    Type of Housing Unit RSE Row Factors Single-Family Apartments in Buildings With Mobile ... Type of Housing Unit RSE Row Factors Single-Family Apartments in Buildings With Mobile ...

  12. spaceheat_household2001.pdf

    U.S. Energy Information Administration (EIA) Indexed Site

    Type of Owner-Occupied Housing Unit RSE Row Factors Single-Family Apartments in Buildings ... Type of Owner-Occupied Housing Unit RSE Row Factors Single-Family Apartments in Buildings ...

  13. ac_household2001.pdf

    U.S. Energy Information Administration (EIA) Indexed Site

    Type of Owner-Occupied Housing Unit RSE Row Factors Single-Family Apartments in Buildings ... Type of Owner-Occupied Housing Unit RSE Row Factors Single-Family Apartments in Buildings ...

  14. spaceheat_household2001.pdf

    U.S. Energy Information Administration (EIA) Indexed Site

    Type of Housing Unit RSE Row Factors Single-Family Apartments in Buildings With Mobile ... Type of Housing Unit RSE Row Factors Single-Family Apartments in Buildings With Mobile ...

  15. ac_household2001.pdf

    U.S. Energy Information Administration (EIA) Indexed Site

    Type of Rented Housing Unit RSE Row Factors Single-Family Apartments in Buildings With ... Type of Rented Housing Unit RSE Row Factors Single-Family Apartments in Buildings With ...

  16. Category:Little Rock, AR | Open Energy Information

    Open Energy Info (EERE)

    71 KB SVMediumOffice Little Rock AR Entergy Arkansas Inc.png SVMediumOffice Little ... 68 KB SVMidriseApartment Little Rock AR Entergy Arkansas Inc.png SVMidriseApartment Lit......

  17. Text-Alternative Version of Building America Webinar: Multifamily...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... equal pressure in all of the apartments drawing air out of the apartments and air coming ... So, it's still drawing air from the trickle vents. So, it's pretty clear that in this one ...

  18. Energy Impacts of Energy and Indoor Environmental Quality Retrofits...

    Office of Scientific and Technical Information (OSTI)

    Monthly gas and electricity use data from a set of 13 study apartments and 20 control ... The control apartments were not retrofit. Pre-retrofit modeling indicated annual energy ...

  19. Types of Homes

    Broader source: Energy.gov [DOE]

    Explore energy-saving information for apartments and rentals, earth-sheltered homes, log homes, and manufactured homes.

  20. South Bronx Overall Economic Development Corporation

    SciTech Connect (OSTI)

    2004-09-01

    This is a fact sheet that describes the energy efficient design and appliances that were used in South Bronx apartments.

  1. Smart-E loans

    Broader source: Energy.gov [DOE]

    Apart from custom energy efficiency financing, the program also offers special bundle financing for certain qualified energy improvements.

  2. Stress Testing of the Philips 60W Replacement Lamp L Prize Entry

    SciTech Connect (OSTI)

    Poplawski, Michael E.; Ledbetter, Marc R.; Smith, Mark

    2012-04-24

    The Pacific Northwest National Laboratory, operated by Battelle for the U.S. Department of Energy, worked with Intertek to develop a procedure for stress testing medium screw-base light sources. This procedure, composed of alternating stress cycles and performance evaluation, was used to qualitatively compare and contrast the durability and reliability of the Philips 60W replacement lamp L Prize entry with market-proven compact fluorescent lamps (CFLs) with comparable light output and functionality. The stress cycles applied simultaneous combinations of electrical, thermal, vibration, and humidity stresses of increasing magnitude. Performance evaluations measured relative illuminance, x chromaticity and y chromaticity shifts after each stress cycle. The Philips L Prize entry lamps appear to be appreciably more durable than the incumbent energy-efficient technology, as represented by the evaluated CFLs, and with respect to the applied stresses. Through the course of testing, all 15 CFL samples permanently ceased to function as a result of the applied stresses, while only 1 Philips L Prize entry lamp exhibited a failure, the nature of which was minor, non-destructive, and a consequence of a known (and resolved) subcontractor issue. Given that current CFL technology appears to be moderately mature and no Philips L Prize entry failures could be produced within the stress envelope causing 100 percent failure of the benchmark CFLs, it seems that, in this particular implementation, light-emitting diode (LED) technology would be much more durable in the field than current CFL technology. However, the Philips L Prize entry lamps used for testing were carefully designed and built for the competition, while the benchmark CFLs were mass produced for retail salea distinction that should be taken into consideration. Further reliability testing on final production samples would be necessary to judge the extent to which the results of this analysis apply to production versions of the Philips L Prize entry.

  3. Lighting Choices to Save You Money | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Saver » Lighting Choices to Save You Money Lighting Choices to Save You Money This Energy 101 video explores the different lighting options available to consumers. Light your home using the same amount of light for less money. By replacing your home's five most frequently used light fixtures or bulbs with models that have earned the ENERGY STAR, you can save $75 each year. New lighting standards took effect in 2012, and money-saving options such as halogen incandescent, CFL, and LED

  4. Guest Room Lighting at the Hilton Columbus Downtown

    SciTech Connect (OSTI)

    2014-06-30

    At the Hilton Columbus Downtown hotel in Ohio, DOE's Better Buildings Alliance conducted a demonstration of Next Generation Luminaires-winning downlights installed in all guest rooms and suites prior to the hotel's 2012 opening. After a post-occupancy assessment, the LED downlights not only provided the aesthetic appearance and dimming functionality desired, but also provided 50% energy savings relative to a comparable CFL downlight and enabled the lighting power to be more than 20% below that allowed by code. This document is a summary case study of the report.

  5. EEG's Preliminary Comments on Basis of Characterization

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    12-03 07,58 FROM,LM TECHNOLOGIES INC ID,5052343008 PAGE ENVIRONMENTAL EVALUATION GROUP , OPPORTUNrTY ( ~ nve ACTION 8'.1PlOYER 1007 WYOMING BOULEVARD, N.E. SUITE F-2 ALBUQUERQUE, NEW MEXICO 87100 (505) 828-1003 FAX (~) 826.1062 ~.:":o September 17, 1999 Dr -Ines Triay. Manager Carlsbad Area Office U-S. Department of Energy P.O. Box 3090 Carlsbad. NM 88221-3090 -,' '0,-. - Dear Dr. Triay: EEG's preliminary comments on the Fundamental Bases of the Characterizaf;on ReCfl.tirement... for

  6. Transfer of Excess Computer and IT Equipment to the Northern Arapaho Tribe

    Energy Savers [EERE]

    | Department of Energy Transfer of Excess Computer and IT Equipment to the Northern Arapaho Tribe Transfer of Excess Computer and IT Equipment to the Northern Arapaho Tribe July 2, 2015 - 12:34pm Addthis What does this project do? Goal 1. Protect human health and the environment. Goal 4. Optimize the use of land and assets. In an effort to expand the Computers for Learning (CFL) program, the U.S. Department of Energy Office of Legacy Management (LM) has begun reaching out to educational and

  7. DOE Zero Energy Ready Home Case Study: The Imery Group — Proud Green Home, Serenbe, GA

    SciTech Connect (OSTI)

    none,

    2014-09-01

    The first certified Zero Energy Ready Home in Georgia was honored in the Custom Builder category of the 2014 Housing Innovation Awards. The 2,811-ft2, two-story custom home has 2x6 advanced framed walls filled with R-20 of open-cell spray foam, plus an R-6.6 insulated coated OSB sheathing. Also included is electronic monitoring equipment that tracks the PV, solar thermal water heater, ERV, mini-split heat pump with three indoor heads, solar water heater, and LED and CFL lighting.

  8. Newark Neighbors Saving Energy | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Newark Neighbors Saving Energy Newark Neighbors Saving Energy April 2, 2010 - 2:32pm Addthis Joshua DeLung Rosa and Francisco Sanchez are ecstatic about the weatherization work done to their Newark, N.J., home. When Francisco explains the changes they have seen, his smile beams from ear to ear. "They replaced my boiler, put in some new CFL light bulbs and gave me some carbon monoxide detectors," he says. "I was happy when I got approved after filling out the application for

  9. Building America Whole-House Solutions for Existing Homes: Cascade

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Apartments - Deep Energy Multifamily Retrofit (Fact Sheet) | Department of Energy Building America Whole-House Solutions for Existing Homes: Cascade Apartments - Deep Energy Multifamily Retrofit (Fact Sheet) Building America Whole-House Solutions for Existing Homes: Cascade Apartments - Deep Energy Multifamily Retrofit (Fact Sheet) This project implemented energy retrofit improvements in the Cascade multifamily community, which resulted in annual energy cost savings of 22%, improved comfort

  10. Heat exchange apparatus

    DOE Patents [OSTI]

    Degtiarenko, Pavel V.

    2003-08-12

    A heat exchange apparatus comprising a coolant conduit or heat sink having attached to its surface a first radial array of spaced-apart parallel plate fins or needles and a second radial array of spaced-apart parallel plate fins or needles thermally coupled to a body to be cooled and meshed with, but not contacting the first radial array of spaced-apart parallel plate fins or needles.

  11. Tax Credits, Rebates & Savings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Multi-Family Program provides cash incentives to owners, developers, and property managers of apartments and other multi-family properties for making energy...

  12. Center for Nanophase Materials Sciences (CNMS) - Local Information

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Information LODGING ORNL Guest House Oak Ridge Knoxville Considerations for extended stay arrangements: Oak Ridge Chamber of Commerce (Apartments) Knoxville Area Accommodations...

  13. PPPL researchers present cutting edge results at APS Plasma Physics...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    energy Paper by: M. Yamada, J. Yoo Magnetic reconnection, in which the magnetic field lines in plasma snap apart and violently reconnect, creates massive eruptions of...

  14. Energy Impacts of Energy and Indoor Environmental Quality Retrofits...

    Office of Scientific and Technical Information (OSTI)

    Energy Impacts of Energy and Indoor Environmental Quality Retrofits of Apartments in California Citation Details In-Document Search Title: Energy Impacts of Energy and Indoor ...

  15. Building America Whole-House Solutions for Existing Homes: Conway...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    empty school building into 12 high performance apartments with low energy costs. The advanced features included an excellent thermal envelope of closed-cell spray foam and...

  16. Tax Credits, Rebates & Savings | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Smart-E loans Apart from custom energy efficiency financing, the program also offers special bundle financing for certain qualified energy improvements. Eligibility: Residential...

  17. Burlington Electric Department- Multi-Family Rental Energy Efficiency Rebate Program

    Broader source: Energy.gov [DOE]

    Burlington Electric Department offers an innovative rebate program geared towards rental apartment owners. The program is designed to offer rebates on some of the most energy intensive household...

  18. Building America Whole-House Solutions for New Homes: EcoVillage...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    neighborhood called the Third Residential EcoVillage Experience (TREE). This community-scale project consists of 40 housing units-15 apartments and 25 single family residences. ...

  19. Austin Energy- Multi-Family Energy Efficiency Rebate Program

    Broader source: Energy.gov [DOE]

    The Austin Energy Multi-Family Program provides cash incentives to owners, developers, and property managers of apartments and other multi-family properties for making energy efficiency...

  20. Building America Case Study: Zero Energy Read Home Multifamily...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Its Spring Lake project in Woodland, California, includes 62 affordable apartment fats and townhomes for agricultural workers and their families. The DOE Building America team ...

  1. Building America Whole-House Solutions for Existing Homes: Cascade...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Building America Whole-House Solutions for Existing Homes: Cascade Apartments - Deep Energy Multifamily Retrofit (Fact Sheet) Building America Whole-House Solutions for Existing...

  2. Category:Utility Rate Impacts on PV Economics By Building Type...

    Open Energy Info (EERE)

    navigation, search Impact of Utility Rates on PV Economics Full Service Restaurant Hospital Large Hotel Large Office Medium Office Midrise Apartment Outpatient Primary School...

  3. Press Pass - Press Release - COUPP experiment tightens limits...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    exploring both spin-dependent and spin-independent mechanisms for dark matter interaction. This is just one of the aspects that set our experiment apart from the...

  4. Partnerships

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... at their Hawaii Ocean Science and Technology (HOST) Park. ... the first two turbines spaced three diameters apart, perpendicular to the prevailing oncoming wind, and the third ...

  5. admin

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... at their Hawaii Ocean Science and Technology (HOST) Park. ... the first two turbines spaced three diameters apart, perpendicular to the prevailing oncoming wind, and the third ...

  6. FINAL-DIVIDER.cdr

    National Nuclear Security Administration (NNSA)

    ... the entire range of fast, intermediate, and thermal ... them apart from normal reactors), with low ... and Management of Sodium-Bonded Spent Nuclear Fuel ...

  7. Link Alpha A

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Alvarez Physics Memos AmeriFlux Animal Welfare and Research Committee (AWRC) Anti-virus software Apartment Retrofits for Energy and Indoor Environmental Quality (IEQ)...

  8. Net-Zero Campus at University of California, Davis | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Net-Zero Campus at University of California, Davis Net-Zero Campus at University of California, Davis Sunlight reflects off the metal window sun shields on the Ramble apartments at West Village at UC Davis in Davis, California. Sunlight reflects off the metal window sun shields on the Ramble apartments at West Village at UC Davis in Davis, California. Photo by Greg Urquiaga /UC Davis, NREL 20240 The new Viridian apartments at West Village at UC Davis. The new Viridian apartments at West Village

  9. Neutron detection apparatus

    DOE Patents [OSTI]

    Kopp, Manfred K.; Valentine, Kenneth H.

    1983-01-01

    An atomic fission counting apparatus used for neutron detection is provided with spirally curved electrode plates uniformly spaced apart in a circular array and coated with fissile material.

  10. Tax Credits, Rebates & Savings | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    rental apartment owners. The program is designed to offer rebates on some of the most energy intensive household... Eligibility: Multifamily Residential Savings Category:...

  11. Category:Burlington, VT | Open Energy Information

    Open Energy Info (EERE)

    Burlington VT Central Vermont Pub Serv Corp.png SVMidriseApartment Bur... 68 KB SVQuickServiceRestaurant Burlington VT Central Vermont Pub Serv Corp.png...

  12. The Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... Act as it relates to bargaining in the situation, as well as with any procedures set out ...... StreetApartment Number ...

  13. PROJECT PROFILE: California Center for Sustainable Energy (Solar...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    As part of this process, CSE will implement a pilot project in Santa Monica, California, engaging both apartment buildings and condominiums in the multifamily sector in order to ...

  14. DOE-Funded Research Projects Win 46 R&D 100 Awards for 2009 ...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... mass analysis of large, intact biological molecules without having to break them apart. ... With this new method of investigating performance and integrity of the power line systems, ...

  15. 1

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    programs, are sure to delight big and small. Apart from being fun, these activities teach kids important scientific principles and applications, said science educator Gordon...

  16. Fermilab Today | Florida Institute of Technology

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    electron-ion collider. WHAT SETS PARTICLE PHYSICS AT FLORIDA TECH APART? The Florida Tech HEP group has a long history of hadron collider physics, instrumentation of HEP...

  17. Building America Case Study: Evaluation of Ventilation Strategies...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... Thus, this system approach provides make-up air more reliably than passive inlets. * Active ... air to apartments; however, a thorough testing and balancing process is required. ...

  18. Tax Credits, Rebates & Savings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Thermal Electric Tax Credits, Rebates & Savings Tax Credits, Rebates & Savings Smart-E loans Apart from custom energy efficiency financing, the program also offers special...

  19. San Antonio Better Buildings Partners Recognized for Advancing...

    Office of Environmental Management (EM)

    officials had the opportunity to tour SAHA's, Better Building's showcase project, Marie McGuire Lofts apartments. SAHA expects to save 10% this year on energy costs within...

  20. Native Village of Unalakleet- 2011 Project

    Broader source: Energy.gov [DOE]

    The Native Village of Unalakleet (NVU) project is a feasibility study for a retrofit of a tribally owned three-story 14-apartment complex, located in Unalakleet, Alaska.

  1. Fact #893: October 5, 2015 Incentives for the Installation of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    districts; statefederal agencies; public universities; public transit agencies; private non-profit or for-profit corporations; landlords of multi-family apartment buildings; ...

  2. Tax Credits, Rebates & Savings | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    and property managers of apartments and other multi-family properties for making energy efficiency... Eligibility: Commercial, Construction, Multifamily Residential Savings...

  3. DOE-STD-1090-2004; Hoisting and Rigging (Formerly Hoisting and...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... of lift apart from traditional hoisting and rigging ... Determine the type, class, and minimum capacity of lifting ... within the crew's organizational structure. c. ...

  4. OSTI, US Dept of Energy, Office of Scientific and Technical Informatio...

    Office of Scientific and Technical Information (OSTI)

    ... Its Applications, 2006, Los Alamos National Laboratory, February 2006. David Kaiser, "Drawing Theories Apart: The Dispersion of Feynman Diagrams in Postwar Physics," (University of ...

  5. Project Reports for Native Village of Unalakleet- 2011 Project

    Broader source: Energy.gov [DOE]

    The Native Village of Unalakleet (NVU) project is a feasibility study for a retrofit of a tribally owned three-story 14-apartment complex, located in Unalakleet, Alaska.

  6. Seeing the Light: LED Under-Cabinet and Recessed Downlights

    Broader source: Energy.gov [DOE]

    I moved into my apartment about four years ago. Little by little, I've continued to make improvements that help me save money on my energy bills.

  7. Radiator Labs | Department of Energy

    Energy Savers [EERE]

    the coldest apartment above a minimum statutory temperature. ... Sort by: Random | Alphabetical | Rating (High to Low) | ... a new wastewater treatment process, termed "CANDO", ...

  8. Idaho's Advanced Mixed Waste Treatment Project Details 2013

    Office of Environmental Management (EM)

    Demolition Project | Department of Energy D&D Crew Uses Specialized Tools to Cut Apart Massive Tank in Demolition Project Idaho Site D&D Crew Uses Specialized Tools to Cut Apart Massive Tank in Demolition Project November 25, 2015 - 12:05pm Addthis A worker employs a thermal lance to cut apart a massive tank so it can be removed from a building slated for demolition at the Idaho Site's Materials and Fuels Complex. A worker employs a thermal lance to cut apart a massive tank so it can

  9. Building America Whole-House Solutions for Existing Homes: Cascade...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Building America Whole-House Solutions for Existing Homes: Cascade Apartments - Deep Energy Multifamily Retrofit (Fact Sheet) Building America Whole-House Solutions for Existing ...

  10. Geothermal Heat Pump System for the New 500-bed 200,000 SF Student Housing Project at the University at Albanys Main Campus

    Broader source: Energy.gov [DOE]

    This project proposes to heat and cool planned 500-bed apartment-style student housing with closed loop vertical bore geothermal heat pump system installation.

  11. Nevada National Security Site Wraps Up 2013 | Department of Energy

    Office of Environmental Management (EM)

    Net-Zero Campus at University of California, Davis Net-Zero Campus at University of California, Davis Sunlight reflects off the metal window sun shields on the Ramble apartments at West Village at UC Davis in Davis, California. Sunlight reflects off the metal window sun shields on the Ramble apartments at West Village at UC Davis in Davis, California. Photo by Greg Urquiaga /UC Davis, NREL 20240 The new Viridian apartments at West Village at UC Davis. The new Viridian apartments at West Village

  12. Building America Case Study: Predicting Envelope Leakage in Attached...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    team, Consortium for Advanced Residential Buildings (CARB), performed statistical analysis on blower door test results from 236 attached dwelling units in 17 apartment complexes. ...

  13. DOE Announces Webinars on the National Fuel Cell Technology Evaluation...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    as apartments and condominiums. The webinar features these partners sharing lessons learned and best practices on going solar. View the past webinar. January 23: Real-Time...

  14. Tax Credits, Rebates & Savings | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    to owners, developers, and property managers of apartments and other multi-family properties for making energy efficiency... Eligibility: Commercial, Construction,...

  15. Tax Credits, Rebates & Savings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Program provides cash incentives to owners, developers, and property managers of apartments and other multi-family properties for making energy efficiency... Eligibility:...

  16. Sandia National Laboratories: Locations: Albuquerque, New Mexico...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Albuquerque also has family neighborhoods and rural settings with room for horses. Apartments are available throughout the city, many in close proximity to Sandia. There is an...

  17. A method for modeling oxygen diffusion in an agent-based model with application to host-pathogen infection

    SciTech Connect (OSTI)

    Plimpton, Steven J.; Sershen, Cheryl L.; May, Elebeoba E.

    2015-01-01

    This paper describes a method for incorporating a diffusion field modeling oxygen usage and dispersion in a multi-scale model of Mycobacterium tuberculosis (Mtb) infection mediated granuloma formation. We implemented this method over a floating-point field to model oxygen dynamics in host tissue during chronic phase response and Mtb persistence. The method avoids the requirement of satisfying the Courant-Friedrichs-Lewy (CFL) condition, which is necessary in implementing the explicit version of the finite-difference method, but imposes an impractical bound on the time step. Instead, diffusion is modeled by a matrix-based, steady state approximate solution to the diffusion equation. Moreover, presented in figure 1 is the evolution of the diffusion profiles of a containment granuloma over time.

  18. Next Generation Luminaire (NGL) Downlight Demonstration Project: St. Anthony's Hospital

    Broader source: Energy.gov [DOE]

    The U.S. DOE conducts demonstration projects documenting the performance of LED luminaires relative to conventional technologies to increase market adoption of energy-efficient LED systems and to stimulate ongoing product development. These demonstration projects evaluate various aspects of lighting design, purchase, installation, and operation, and they assess the impacts LED technology might have on building owners and users.The prior reports featured NGL-recognized LED downlight luminaires in projects that were either new construction (Hilton Columbus Downtown) or a major renovation (Alston & Bird, LLC). But purchasing and installing new luminaires is not always feasible for existing buildings. For this report, the DOE evaluated the use of LED replacement lamps in the existing CFL downlights at St. Anthony Hospital in Gig Harbor, WA.

  19. Portable lamp with dynamically controlled lighting distribution

    DOE Patents [OSTI]

    Siminovitch, Michael J.; Page, Erik R.

    2001-01-01

    A double lamp table or floor lamp lighting system has a pair of compact fluorescent lamps (CFLs) arranged vertically with a reflective septum in between. By selectively turning on one or both of the CFLs, down lighting, up lighting, or both up and down lighting is produced. The control system can also vary the light intensity from each CFL. The reflective septum insures that almost all the light produced by each lamp will be directed into the desired light distribution pattern which is selected and easily changed by the user. Planar compact fluorescent lamps, e.g. circular CFLs, particularly oriented horizontally, are preferable. CFLs provide energy efficiency. The lighting system may be designed for the home, hospitality, office or other environments.

  20. A method for modeling oxygen diffusion in an agent-based model with application to host-pathogen infection

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Plimpton, Steven J.; Sershen, Cheryl L.; May, Elebeoba E.

    2015-01-01

    This paper describes a method for incorporating a diffusion field modeling oxygen usage and dispersion in a multi-scale model of Mycobacterium tuberculosis (Mtb) infection mediated granuloma formation. We implemented this method over a floating-point field to model oxygen dynamics in host tissue during chronic phase response and Mtb persistence. The method avoids the requirement of satisfying the Courant-Friedrichs-Lewy (CFL) condition, which is necessary in implementing the explicit version of the finite-difference method, but imposes an impractical bound on the time step. Instead, diffusion is modeled by a matrix-based, steady state approximate solution to the diffusion equation. Moreover, presented in figuremore » 1 is the evolution of the diffusion profiles of a containment granuloma over time.« less

  1. Overheating in Hot Water- and Steam-Heated Multifamily Buildings

    SciTech Connect (OSTI)

    Dentz, J.; Varshney, K.; Henderson, H.

    2013-10-01

    Apartment temperature data have been collected from the archives of companies that provide energy management systems (EMS) to multifamily buildings in the Northeast U.S. The data have been analyzed from more than 100 apartments in eighteen buildings where EMS systems were already installed to quantify the degree of overheating. This research attempts to answer the question, 'What is the magnitude of apartment overheating in multifamily buildings with central hot water or steam heat?' This report provides valuable information to researchers, utility program managers and building owners interested in controlling heating energy waste and improving resident comfort. Apartment temperature data were analyzed for deviation from a 70 degrees F desired setpoint and for variation by heating system type, apartment floor level and ambient conditions. The data shows that overheating is significant in these multifamily buildings with both hot water and steam heating systems.

  2. Thermostatic Radiator Valve (TRV) Demonstration Project. Final report

    SciTech Connect (OSTI)

    1995-09-01

    This research measured the energy savings associated with installing thermostatic radiator valves (TRVs) on one-pipe low-pressure steam systems in New York City multifamily buildings. There were three primary objectives: to determine whether fuel consumption was lower in buildings using TRVs; to determine if occupants would accept the TRVs; and to determine if overheating in apartments could be eliminated using TRVs. Eight buildings, ranging in size from 15 to 26 apartments, were monitored for three years. Each building was audited to determine fuel history and quick-payback energy conservation measures. The project covered three phases; phase-1 consisted of installing low-cost energy conservation measures such as pipe insulation, air vents and burner tune-tips; determining each building`s baseline energy use, and recording baseline apartment temperatures. TRV installations occurred in phases 2 and 3. In phase-2, TRVs were installed in half the apartments in four buildings. In phase-3, TRVs were installed in the remainder of the apartments. Experimental results were conclusive. Buildings with overheated apartments achieved energy savings through the installation of TRVs. The authors research shows an average reduction of 9.45% in space heating energy use occurred with partial installation of TRVs, and savings of 15.5% were achieved after full installation. Buildings with the highest average apartment temperatures during the base year showed the greatest energy savings. Simple payback, based on an installed price of $50 per TRV, averaged 3.1 years.

  3. Hydronic Heating Retrofits for Low-Rise Multifamily Buildings and Thermostatic Radiator Valve Evaluation

    Energy Savers [EERE]

    Focusing on affordable housing including new and existing multifamily buildings WHY IS THIS IMPORTANT?  ~14 million units in the U.S. use steam or hot water heating  Space heating the largest energy use in mixed and cold climate buildings  Overheating study found nearly all apartments overheated most of the time: average heating season temp. 76.2°F Long-term temperature data from ~100 apartments in 18 buildings:  Almost all apartments overheated most of the time  Average heating

  4. North Village Ground Source Heat Pump Demonstration Project

    SciTech Connect (OSTI)

    Redderson, Jeff

    2015-08-03

    This project demonstrated the feasibility of converting from a traditional direct exchange system to a ground source heat pump system on a large scale, multiple building apartment complex on a university campus. A total of ten apartment buildings were converted using vertical well fields and a ground source loop that connected the 24 apartments in each building into a common system. The system has yielded significant operational savings in both energy and maintenance and transformed the living environments of these residential buildings for our students.

  5. Overheating in Hot Water- and Steam-Heated Multifamily Buildings

    SciTech Connect (OSTI)

    Dentz, J.; Varshney, K.; Henderson, H.

    2013-10-01

    In this project, the ARIES Building America team collected apartment temperature data from the archives of companies that provide energy management systems (EMS) to multifamily buildings in the Northeast U.S. Data was analyzed from more than 100 apartments in eighteen buildings where EMS systems were already installed to quantify the degree of overheating in an effort to answer the question, "What is the magnitude of apartment overheating in multifamily buildings with central hot water or steam heat?" This report provides valuable information to researchers, utility program managers and building owners interested in controlling heating energy waste and improving resident comfort.

  6. App. I

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Department of Energy Apartment Hunting - Part II - Keeping those Energy Bills Down Apartment Hunting - Part II - Keeping those Energy Bills Down August 23, 2010 - 5:17pm Addthis Kyle Rudzinski Special Assistant to the Director of Technology Advancement and Outreach, EERE I recently went looking for a new apartment. And though my parents may say I'm stingy, I like to think I'm economical. Or better yet, I'm a bargain hunter. I asked myself three main questions when looking for my new place:

  7. Tax Credits, Rebates & Savings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    to multi-family property for residents or building managers of apartment or condominium complex with 5-50 units per building. The program provides free energy audits, free...

  8. Manhattan Project: San Ildefonso Pueblo Party

    Office of Scientific and Technical Information (OSTI)

    "Bernice Brode wrote: 'Some of us had more Indian crafts in our Army apartments than the Indians had in their homes, (and) modern American conveniences such as refrigerators and ...

  9. Local Information

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    mo for a furnished apartment). Much of the housing in Los Alamos was built in the 1940's and 50's so expect older rental accommodations. Look early Additionally,...

  10. Off-site Lodging (short-term) | Advanced Photon Source

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Off-site Lodging (short-term): Extended Stay America external link 2345 Sokol Court, Darien, IL (For special Argonne rates call 630-985-4708) Oakwood Apartments external link...

  11. Radiant energy collector. [Patent application

    DOE Patents [OSTI]

    McIntire, W.R.

    1980-02-14

    A cylindrical radiant energy collector is provided which includes a reflector spaced apart from an energy absorber. The reflector is of a particular shape which ideally eliminates gap losses.

  12. CNS helps provide housing to homeless veterans in Tennessee ...

    National Nuclear Security Administration (NNSA)

    in the 1.83-million effort to provide permanent housing to homeless veterans who have mental illnesses. Late last year, the ribbon was cut on the first apartment building, and the...

  13. Category:Atlantic City, NJ | Open Energy Information

    Open Energy Info (EERE)

    16 files are in this category, out of 16 total. SVFullServiceRestaurant Atlantic City NJ Public Service Elec & Gas Co.png SVFullServiceRestauran... 63 KB SVMidriseApartment...

  14. ARM - Publications: Science Team Meeting Documents: Deployment...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    approximately 1km apart. The instrument transmitter includes two arrays of nearIR LEDs which emit light in a 125-Hz pulsed mode. The receiver measures the temporal...

  15. DOE Tour of Zero: Mutual Housing at Spring Lake by Mutual Housing...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    all the way to the roof edge of the townhomes. 11 of 14 Ultra-efficient air-to-water heat pumps provide heat and ... In the one-level apartments, the comfort deliver system ...

  16. Energy Department Announces Major Recovery Act Milestone: 600...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    the goal of weatherizing more than 600,000 low-income homes- including more than 125,000 multi-family homes like apartment buildings - more than three months ahead of schedule. ...

  17. untitled

    U.S. Energy Information Administration (EIA) Indexed Site

    Home Office Equipment RSE Column Factor: Total Type of Housing Unit RSE Row Factors Single-Family Apartments in Buildings With Mobile Home Two to Four Units Five or More Units 0.4 ...

  18. North Shore Gas- Residential Rebate Program

    Broader source: Energy.gov [DOE]

    The North Shore Gas Natural Gas Savings Program offers incentives to encourage customers to make energy-efficient improvements to their homes and apartment buildings. Rebates are available on...

  19. Sep08.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    measurements, three scanning, compact microwave radiometers were deployed, each 10 kilometers (6.2 miles) apart, to form a triangle. One of the radiometers was based at the SGP...

  20. Snow Depth and Density at End-of-Winter for NGEE Areas A, B, C and D, Barrow, Alaska, 2012-2014

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Anna Liljedahl; Cathy Wilson

    2016-02-02

    End-of-winter snow depth and average snow density from area A, B, C and D, which include 1000's of point depth measurement located between approximately 20 and 50 cm apart.

  1. Critical Question #4: What are the Best Off-the-Shelf HVAC Solutions...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    HVAC Solutions for Low-Load, High-Performance Homes and Apartments? Critical Question 4: What are the Best Off-the-Shelf HVAC Solutions for Low-Load, High-Performance Homes ...

  2. Fermilab Today | Southern Methodist University

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    PARTICLE PHYSICS AT SMU APART? The SMU group was initiated to support the Superconducting Super Collider and has been active in LHC physics since the mid-1990s. We lead the world...

  3. DOE Zero Energy Ready Home Case Study, Transformations, Inc....

    Energy Savers [EERE]

    ... 1,842 * Annual energy savings: without solar 60 MMBtu; with solar -20.1 MMBtu ZERO ... walls spaced 5 inches apart and filled with low-density (open-cell) spray foam (R-45.6). ...

  4. New Hampshire Electric Co-Op- Low-Income Energy Assistance Grant Program

    Broader source: Energy.gov [DOE]

    The Energy Assistance Program is designed to help NHEC's income-qualified members manage energy use with the goal of lowering total energy costs. Qualified members living in an apartment or house,...

  5. Promising Inspection Technique for Vehicle Welding Offers Efficient Alternative

    Broader source: Energy.gov [DOE]

    The average car uses more than 4,000 spot welds to hold its parts together. While manufacturers currently inspect the quality of welds by prying apart samples, Oak Ridge National Laboratory (ORNL)...

  6. Single Rotor Turbine

    DOE Patents [OSTI]

    Platts, David A.

    2004-10-26

    A rotor for use in turbine applications has a centrifugal compressor having axially disposed spaced apart fins forming passages and an axial turbine having hollow turbine blades interleaved with the fins and through which fluid from the centrifugal compressor flows.

  7. Science Behind the Fiction: Contagion [2011] | Argonne National...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    experts like Argonne's Dan Walsh and Ed Tanzman, cities like Chicago can run emergency drills to prepare for the worst-case scenarios. "What I took away from that movie, apart from...

  8. Make Your Mark in the 2011 Hydrogen Student Design Contest

    Broader source: Energy.gov [DOE]

    The contest is challenges undergraduate and graduate students worldwide to plan and design a residential hydrogen fueling system for a home, apartment complex, dorm or other single residential building.

  9. Science Behind the Fiction: The Dark Knight Rises [2012] | Argonne...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    energy out of atomic nuclei. One is by splitting heavy atoms apart: a process called fission. That's what today's nuclear reactors do. But light nuclei also give off energy...

  10. Cooled particle accelerator target

    DOE Patents [OSTI]

    Degtiarenko, Pavel V.

    2005-06-14

    A novel particle beam target comprising: a rotating target disc mounted on a retainer and thermally coupled to a first array of spaced-apart parallel plate fins that extend radially inwardly from the retainer and mesh without physical contact with a second array of spaced-apart parallel plate fins that extend radially outwardly from and are thermally coupled to a cooling mechanism capable of removing heat from said second array of spaced-apart fins and located within the first array of spaced-apart parallel fins. Radiant thermal exchange between the two arrays of parallel plate fins provides removal of heat from the rotating disc. A method of cooling the rotating target is also described.

  11. Esmeralda Energy Company Final Scientific Technical Report, January...

    Open Energy Info (EERE)

    to evaluate the commercial geothermal potential of the eastern margin of the northern Fish Lake Valley pull-apart basin in west-central Nevada. The program involved three phases:...

  12. Building America Case Study: Technology Solutions for New and...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    size allowing for use in a wide variety of applications where space is at a premium * Small capacities suitable for low-load buildings, small apartments, and indi- vidual rooms. ...

  13. CX-008529: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Energy Efficiency and Conservation Block Grant Franklyn Park Apartments; North Saint Paul CX(s) Applied: A9, B5.19 Date: 05/17/2012 Location(s): Minnesota Offices(s): Golden Field Office

  14. CCI - Community College Internships | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    receive a stipend of 500 per week. We provide housing in Iowa State University apartments. We pay up to 500 for student travel to our site. We focus on your success Our...

  15. Energy Savings 101: No Prerequisite Required | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of iStockphoto.comXiXinXing Energy-Efficient College Life Easy Energy Tips for Apartments or Rental Homes Using a programmable thermostat is one way to save energy in your...

  16. Search for: All records | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    ... and the patterns of loss and gain of the flexible genes over the course of evolution. ... synthesis and transport that dominate the flexible genome and set it apart from the core. ...

  17. Leveraging Limited Scope for Maximum Benefit in Occupied Renovation of Uninsulated Cold Climate Multifamily Housing

    SciTech Connect (OSTI)

    Neuhauser, K.; Bergey, D.; Osser, R.

    2012-03-01

    This project examines a large-scale renovation project within a 500 unit, 1960's era subsidized urban housing community. This research focuses on the airflow control and window replacement measures implemented as part of the renovations to the low-rise apartment buildings. The window replacement reduced the nominal conductive loss of the apartment enclosure by approximately 15%; air sealing measures reduced measured air leakage by approximately 40% on average.

  18. Geothermal Mill Redevelopment Project in Massachusetts

    SciTech Connect (OSTI)

    Vale, A.Q.

    2009-03-17

    Anwelt Heritage Apartments, LLC redeveloped a 120-year old mill complex into a mixed-use development in a lower-income neighborhood in Fitchburg, Massachusetts. Construction included 84 residential apartments rented as affordable housing to persons aged 62 and older. The Department of Energy (“DOE”) award was used as an essential component of financing the project to include the design and installation of a 200 ton geothermal system for space heating and cooling.

  19. High order finite difference methods with subcell resolution for advection equations with stiff source terms

    SciTech Connect (OSTI)

    Wang, Wei; Shu, Chi-Wang; Yee, H.C.; Sjgreen, Bjrn

    2012-01-01

    A new high order finite-difference method utilizing the idea of Harten ENO subcell resolution method is proposed for chemical reactive flows and combustion. In reaction problems, when the reaction time scale is very small, e.g., orders of magnitude smaller than the fluid dynamics time scales, the governing equations will become very stiff. Wrong propagation speed of discontinuity may occur due to the underresolved numerical solution in both space and time. The present proposed method is a modified fractional step method which solves the convection step and reaction step separately. In the convection step, any high order shock-capturing method can be used. In the reaction step, an ODE solver is applied but with the computed flow variables in the shock region modified by the Harten subcell resolution idea. For numerical experiments, a fifth-order finite-difference WENO scheme and its anti-diffusion WENO variant are considered. A wide range of 1D and 2D scalar and Euler system test cases are investigated. Studies indicate that for the considered test cases, the new method maintains high order accuracy in space for smooth flows, and for stiff source terms with discontinuities, it can capture the correct propagation speed of discontinuities in very coarse meshes with reasonable CFL numbers.

  20. LED Update

    SciTech Connect (OSTI)

    Johnson, Mark L.; Gordon, Kelly L.

    2006-09-01

    This article, which will appear in RESIDENTIAL LIGHTING MAGAZINE, interviews PNNL's Kelly Gordon and presents the interview in question and answer format. The topic is a light emitting diode (LED) lighting also known as solid state lighting. Solid state lighting will be a new category in an energy efficient lighting fixture design competition called Lighting for Tomorrow sponsored by the US Department of Energy Emerging Technologies Office, the American Institute for Lighting, and the Consortium for Energy Efficiency. LED technology has been around since the ’60s, but it has been used mostly for indicator lights on electronics equipment. The big breakthrough was the development in the 1990s of blue LEDs which can be combined with the red and green LEDs that already existed to make white light. LEDs produce 25 to 40 lumens of light per watt of energy used, almost as much as a CFL (50 lumens per watt) and much more efficient than incandescent sources, which are around 15 lumens per watt. They are much longer lived and practical in harsh environments unsuitable for incandescent lighting. They are ready for niche applications now, like under-counter lighting and may be practical for additional applications as technological challenges are worked out and the technology is advancing in leaps and bounds.

  1. Schwarz method for earthquake source dynamics

    SciTech Connect (OSTI)

    Badea, Lori Ionescu, Ioan R. Wolf, Sylvie

    2008-04-01

    Dynamic faulting under slip-dependent friction in a linear elastic domain (in-plane and 3D configurations) is considered. The use of an implicit time-stepping scheme (Newmark method) allows much larger values of the time step than the critical CFL time step, and higher accuracy to handle the non-smoothness of the interface constitutive law (slip weakening friction). The finite element form of the quasi-variational inequality is solved by a Schwarz domain decomposition method, by separating the inner nodes of the domain from the nodes on the fault. In this way, the quasi-variational inequality splits into two subproblems. The first one is a large linear system of equations, and its unknowns are related to the mesh nodes of the first subdomain (i.e. lying inside the domain). The unknowns of the second subproblem are the degrees of freedom of the mesh nodes of the second subdomain (i.e. lying on the domain boundary where the conditions of contact and friction are imposed). This nonlinear subproblem is solved by the same Schwarz algorithm, leading to some local nonlinear subproblems of a very small size. Numerical experiments are performed to illustrate convergence in time and space, instability capturing, energy dissipation and the influence of normal stress variations. We have used the proposed numerical method to compute source dynamics phenomena on complex and realistic 2D fault models (branched fault systems)

  2. Newton-Krylov-Schwarz methods for aerodynamics problems : compressible and incompressible flows on unstructured grids.

    SciTech Connect (OSTI)

    Kaushik, D. K.; Keyes, D. E.; Smith, B. F.

    1999-02-24

    We review and extend to the compressible regime an earlier parallelization of an implicit incompressible unstructured Euler code [9], and solve for flow over an M6 wing in subsonic, transonic, and supersonic regimes. While the parallelization philosophy of the compressible case is identical to the incompressible, we focus here on the nonlinear and linear convergence rates, which vary in different physical regimes, and on comparing the performance of currently important computational platforms. Multiple-scale problems should be marched out at desired accuracy limits, and not held hostage to often more stringent explicit stability limits. In the context of inviscid aerodynamics, this means evolving transient computations on the scale of the convective transit time, rather than the acoustic transit time, or solving steady-state problems with local CFL numbers approaching infinity. Whether time-accurate or steady, we employ Newton's method on each (pseudo-) timestep. The coupling of analysis with design in aerodynamic practice is another motivation for implicitness. Design processes that make use of sensitivity derivatives and the Hessian matrix require operations with the Jacobian matrix of the state constraints (i.e., of the governing PDE system); if the Jacobian is available for design, it may be employed with advantage in a nonlinearly implicit analysis, as well.

  3. Final review of the Campbell Creek demonstrations showcased by Tennessee Valley Authority

    SciTech Connect (OSTI)

    Gehl, Anthony C.; Munk, Jeffrey D.; Jackson, Roderick K.; Boudreaux, Philip R.; Miller, William A.; New, Joshua Ryan; Khowailed, Giannate

    2015-06-01

    The Tennessee Valley Authority (TVA) Technology Innovation, Energy Efficiency, Power Delivery and Utilization Office funded and managed a showcase demonstration located in the suburbs of west Knox county, Tennessee. Work started March 2008 with the goal of documenting best practices for retrofitting existing homes and for building new high-efficiency homes. The Oak Ridge National Laboratory and the Electric Power Research Institute (EPRI) provided technical support. An analytical base was developed for helping homeowners, homebuyers, builders, practitioners and the TVA make informed economic decisions for the materials and incentives necessary to build a new high-efficiency home or retrofit an existing home. New approaches to more efficiently control active energy subsystems and information for selecting or upgrading to Energy Star appliances, changing all lights to 100% CFL s and upgrading windows to low-E gas filled glazing yields a 40% energy savings with neutral cash flow for the homeowner. Passive designs were reviewed and recommendations made for envelope construction that is durable and energy efficient. The Campbell Creek project complements the DOE Building Technologies Program strategic goal. Results of the project created technologies and design approaches that will yield affordable energy efficient homes. The 2010 DOE retrofit goals are to find retrofit packages that attain 30% whole house energy savings as documented by pre and post Home Energy rating scores (HERS). Campbell Creek met these goals.

  4. Parallel-wire grid assembly with method and apparatus for construction thereof

    DOE Patents [OSTI]

    Lewandowski, Edward F. (Westmont, IL); Vrabec, John (South Holland, IL)

    1984-01-01

    Disclosed is a parallel wire grid and an apparatus and method for making the same. The grid consists of a generally coplanar array of parallel spaced-apart wires secured between metallic frame members by an electrically conductive epoxy. The method consists of continuously winding a wire about a novel winding apparatus comprising a plurality of spaced-apart generally parallel spindles. Each spindle is threaded with a number of predeterminedly spaced-apart grooves which receive and accurately position the wire at predetermined positions along the spindle. Overlying frame members coated with electrically conductive epoxy are then placed on either side of the wire array and are drawn together. After the epoxy hardens, portions of the wire array lying outside the frame members are trimmed away.

  5. Determining resistivity of a formation adjacent to a borehole having casing using multiple electrodes and with resistances being defined between the electrodes

    DOE Patents [OSTI]

    Vail, W.B. III

    1996-10-29

    Methods of operation are disclosed for different types of multiple electrode apparatus vertically disposed in a cased well to measure information related to the resistivity of adjacent geological formations from inside the cased well. The multiple electrode apparatus have a minimum of three spaced-apart voltage measurement electrodes that electrically engage the interior of the cased well. Measurement information is obtained related to current which is caused to flow from the cased well into the adjacent geological formation. First compensation information is obtained related to a first casing resistance between a first pair of the spaced-apart voltage measurement electrodes. Second compensation information is obtained related to a second casing resistance between a second pair of the spaced-apart voltage measurement electrodes. The measurement information, and first and second compensation information are used to determine a magnitude related to the adjacent formation resistivity. 13 figs.

  6. Parallel-wire grid assembly with method and apparatus for construction thereof

    DOE Patents [OSTI]

    Lewandowski, E.F.; Vrabec, J.

    1981-10-26

    Disclosed is a parallel wire grid and an apparatus and method for making the same. The grid consists of a generally coplanar array of parallel spaced-apart wires secured between metallic frame members by an electrically conductive epoxy. The method consists of continuously winding a wire about a novel winding apparatus comprising a plurality of spaced-apart generally parallel spindles. Each spindle is threaded with a number of predeterminedly spaced-apart grooves which receive and accurately position the wire at predetermined positions along the spindle. Overlying frame members coated with electrically conductive epoxy are then placed on either side of the wire array and are drawn together. After the epoxy hardens, portions of the wire array lying outside the frame members are trimmed away.

  7. Inquiring Minds - Questions About Physics

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Simple formula for the strong and weak interactions? Hello, Is there a simple formula for the strong and weak interactions just as there is for Electromagnetism and Gravity. Hi Dominic, When you say simple formulae for Electromagnetism and Gravity I bet you mean the following two nice and understandable equations: Electromagnetism - Force between two charges Q and q which are r meters apart is given by F(em)= k*Q*q/(r*r) Gravity - Force between two masses M and m which are r meters apart is

  8. Tracking system for solar collectors

    DOE Patents [OSTI]

    Butler, B.

    1980-10-01

    A tracking system is provided for pivotally mounted spaced-apart solar collectors. A pair of cables is connected to spaced-apart portions of each collector, and a driver displaces the cables, thereby causing the collectors to pivot about their mounting, so as to assume the desired orientation. The collectors may be of the cylindrical type as well as the flat-plate type. Rigid spar-like linkages may be substituted for the cables. Releasable attachments of the cables to the collectors is also described, as is a fine tuning mechanism for precisely aligning each individual collector.

  9. Tracking system for solar collectors

    DOE Patents [OSTI]

    Butler, Barry L.

    1984-01-01

    A tracking system is provided for pivotally mounted spaced-apart solar collectors. A pair of cables is connected to spaced-apart portions of each collector, and a driver displaces the cables, thereby causing the collectors to pivot about their mounting, so as to assume the desired orientation. The collectors may be of the cylindrical type as well as the flat-plate type. Rigid spar-like linkages may be substituted for the cables. Releasable attachments of the cables to the collectors is also described, as is a fine tuning mechanism for precisely aligning each individual collector.

  10. EcoVillage: A Net Zero Energy Ready Community

    SciTech Connect (OSTI)

    Arena, L.; Faakye, O.

    2015-02-01

    CARB is working with the EcoVillage co-housing community in Ithaca, New York, on their third neighborhood called the Third Residential EcoVillage Experience (TREE). This community scale project consists of 40 housing units --15 apartments and 25 single family residences. The community is pursuing certifications for DOE Zero Energy Ready Home, U.S. Green Building Council Leadership in Energy and Environmental Design Gold, and ENERGY STAR for the entire project. Additionally, seven of the 25 homes, along with the four-story apartment building and community center, are being constructed to the Passive House (PH) design standard.

  11. Scramjet combustor

    SciTech Connect (OSTI)

    Harshman, D.L.

    1991-12-17

    This patent describes an improvement in a scramjet combustor having a longitudinal axis and two spaced-apart, generally opposing, and generally longitudinally extending walls, with each of the walls having an aft-facing step, the steps being a longitudinal distance apart, the combustor also having a fuel injector disposed proximate a the step at an acute positive angle with respect to the longitudinal axis. The improvement comprises: means for varying the longitudinal distance during supersonic flight; means for varying the fuel injector angle during supersonic flight; and means for varying the transverse distance between the walls during supersonic flight.

  12. Obama Administration Expands Better Buildings Challenge to Multifamily Housing, Launches New Programs to Boost U.S. Energy Efficiency

    Broader source: Energy.gov [DOE]

    Building on $2 billion in financing commitments from the private sector for energy efficiency updates to commercial buildings under the President's Better Buildings Challenge, the U.S. Departments of Energy and Housing and Urban Development today expanded the Challenge to multifamily housing such as apartments and condominiums.

  13. Micropole undulator

    DOE Patents [OSTI]

    Tatchyn, Roman O.; Csonka, Paul L.; Cremer, Jay T.

    1990-12-11

    Micropole undulators for use in the generation of x-rays from moving charged particles are disclosed. Two rows of spaced apart poles are arranged so that each pole produces a magnetic field aligned with all other similar fields. The poles are the ends of "C"-shaped magnets. In each row, adjacent poles are separated by spacers made of a superconducting material.

  14. Photovoltaic module mounting clip with integral grounding

    DOE Patents [OSTI]

    Lenox, Carl J.

    2010-08-24

    An electrically conductive mounting/grounding clip, usable with a photovoltaic (PV) assembly of the type having an electrically conductive frame, comprises an electrically conductive body. The body has a central portion and first and second spaced-apart arms extending from the central portion. Each arm has first and second outer portions with frame surface-disrupting element at the outer portions.

  15. Building America Technology Solutions Case Study: Evaluation of Passive Vents in New-Construction Multifamily Buildings

    Broader source: Energy.gov [DOE]

    The Consortium for Advanced Residential Buildings (CARB) conducted research to gain more insight into passive vents. Because passive vents are meant to operate in a general environment of negative apartment pressure, the research assessed whether these negative pressures prevail through a variety of environmental conditions.

  16. Distributed electrical leads for thermionic converter

    DOE Patents [OSTI]

    Fitzpatrick, Gary O.; Britt, Edward J.

    1979-01-01

    In a thermionic converter, means are provided for coupling an electrical lead to at least one of the electrodes thereof. The means include a bus bar and a plurality of distributed leads coupled to the bus bar each of which penetrates through one electrode and are then coupled to the other electrode of the converter in spaced apart relation.

  17. Riser Difference Evaluation from Ultrasonic Wall Thickness Inspection of Thirteen Double-Shell Tanks

    SciTech Connect (OSTI)

    Weier, Dennis R.; Pardini, Allan F.

    2010-03-15

    PNNL has performed an analysis of ultrasonic thickness measurements taken on Hanford's double-shell tanks (DSTs) approximately eight years apart. The analysis was performed to determine whether significant differences exist between ultrasonic thickness measurements made in two opposite risers in Hanford DSTs that have been examined twice.

  18. Electromagnetic pump stator frame having power crossover struts

    DOE Patents [OSTI]

    Fanning, Alan W.; Olich, Eugene E.

    1995-01-01

    A stator frame for an electromagnetic pump includes a casing joined to a hub by a plurality of circumferentially spaced apart struts. At least one electrically insulated power crossover lead extends through the hub, through a crossover one of the struts, and through the casing for carrying electrical current therethrough.

  19. Microluminometer chip and method to measure bioluminescence

    DOE Patents [OSTI]

    Simpson, Michael L [Knoxville, TN; Paulus, Michael J [Knoxville, TN; Sayler, Gary S [Blaine, TN; Applegate, Bruce M [West Lafayette, IN; Ripp, Steven A [Knoxville, TN

    2008-05-13

    An integrated microluminometer includes an integrated circuit chip having at least one n-well/p-substrate junction photodetector for converting light received into a photocurrent, and a detector on the chip for processing the photocurrent. A distributed electrode configuration including a plurality of spaced apart electrodes disposed on an active region of the photodetector is preferably used to raise efficiency.

  20. Three-point spherical mirror mount

    DOE Patents [OSTI]

    Cutburth, R.W.

    1984-01-23

    A three-point spherical mirror mount for use with lasers is disclosed. The improved mirror mount is adapted to provide a pivot ring having an outer surface with at least three spaced apart mating points to engage an inner spherical surface of a support housing.

  1. Radial-radial single rotor turbine

    DOE Patents [OSTI]

    Platts, David A.

    2006-05-16

    A rotor for use in turbine applications has a radial compressor/pump having radially disposed spaced apart fins forming passages and a radial turbine having hollow turbine blades interleaved with the fins and through which fluid from the radial compressor/pump flows. The rotor can, in some applications, be used to produce electrical power.

  2. Building America Technology Solutions for New and Existing Homes: Multifamily Central Heat Pump Water Heaters (Fact Sheet)

    Broader source: Energy.gov [DOE]

    To evaluate the performance of central heat pump water heaters for multifamily applications, the Alliance for Residential Building Innovation team monitored the performance of a 10.5 ton central HPWH installed on a student apartment building at the West Village Zero Net Energy Community in Davis, California, for 16 months.

  3. Organized Village of Saxman: Cape Fox Corporation- 1995 Project

    Broader source: Energy.gov [DOE]

    The project is located in southeast Alaska approximately five air miles northeast of the city of Ketchikan. The site generally consists of two lakes, Upper and Lower Mahoney Lake, that are approximately one mile apart, but differ in elevation by more than 1,800 feet. It is this difference in elevation that would be utilized by the proposed project to generate electricity.

  4. CX-003997: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    City of Philadelphia (Pennsylvania), Energy Efficiency and Conservation Block Grant: Commercial and Industrial Energy Efficiency Building Retrofit Revolving Loan - Campus ApartmentsCX(s) Applied: B5.1Date: 09/22/2010Location(s): Philadelphia, PennsylvaniaOffice(s): Energy Efficiency and Renewable Energy, Golden Field Office

  5. Superconducting articles, and methods for forming and using same

    DOE Patents [OSTI]

    Knoll, Allan Robert; Lenseth, Kenneth Patrick

    2007-01-09

    A superconducting tape is disclosed, including a substrate having a first surface and a second surface opposite the first surface, the substrate including a plurality of indicia provided on the first surface spaced apart along a length of the substrate; and a superconductor layer overlying the second surface. Also disclosed are components incorporating superconducting tapes, methods for manufacturing same, and methods for using same.

  6. Multilayer capacitor suitable for substrate integration and multimegahertz filtering

    DOE Patents [OSTI]

    Ngo, Khai D. T.

    1990-01-01

    A multilayer capacitor comprises stacked, spaced-apart electrodes of sheet form, dielectric layers between the electrodes, and first and second groups of spaced-apart conductive vias extending transversely of the sheet-form electrodes and through aligned holes in the dielectric layers. Alternate electrodes are instantaneously positive, and the remaining electrodes are instantaneously negative. Each via of the first group is electrically connected to the positive electrodes and passes insulatingly through the negative electrodes. Similarly, each via of the second group is electrically connected to the negative electrodes and passes insulatingly through the positive electrodes. Each via has, in the plane of the electrodes, a cross-sectional form in the shape of an elongated rib of greater length than width. The elongated ribs of the first group are disposed in a first plurality of rows with their lengths in spaced-apart, aligned relationship, and the ribs of the second group are disposed in a second plurality of rows with their lengths in spaced-apart, aligned relationship. The first plurality of rows is disposed substantially orthogonally with respect to the second plurality of rows.

  7. Building America Case Study: Boiler Control Replacement for Hydronically Heated Multifamily Buildings, Cambridge, Massachusetts (Fact Sheet), Technology Solutions for New and Existing Homes, Energy Efficiency & Renewable Energy (EERE)

    Energy Savers [EERE]

    Boiler Control Replacement for Hydronically Heated Multifamily Buildings Cambridge, Massachusetts PROJECT INFORMATION Project Name: Cambridge Alliance for Spanish Tenants Apartments Location: Cambridge, MA Partners: Homeowners Rehab, Inc., homeownersrehab.org Advanced Residential Integrated Solutions Collaborative, levypartnership.com Building Component: HVAC Application: Retrofit, multifamily Year Tested: 2010-2013 Applicable Climate Zone(s): Mixed-Humid and Cold PERFORMANCE DATA Cost of energy

  8. Efficient Solutions for Existing Homes Case Study: Solar Water Heating in Multifamily Buildings

    Broader source: Energy.gov [DOE]

    In spring 2014, Olive Street Development completed a major renovation project—converting an old school building in Greenfield, Massachusetts, into 12 high-performance apartments. The developer installed SDHW to reduce fossil-fuel consumption, and CARB has been monitoring the system since its completion.

  9. Energy Department Helps University of California Develop Net-Zero Campus

    Broader source: Energy.gov [DOE]

    With the help of $2.5 million in U.S. Department of Energy (DOE) funding, the University of California, Davis (UC Davis) built a net-zero community on its 130-acre West Village campus that provides housing for approximately 3,000 people in 662 apartments and 343 single-family homes.

  10. EIS-0050-S: Final Supplemental Impact Statement | Department of Energy

    Energy Savers [EERE]

    50-S: Final Supplemental Impact Statement EIS-0050-S: Final Supplemental Impact Statement Commercial and Apartment Conservation Service Program, Supplemental PDF icon EIS-0050_SEIS.pdf More Documents & Publications EIS-0095: Final Environmental Impact Statement EIS-0102: Final Environmental Impact Statement EIS-0127

  11. Method for passive cooling liquid metal cooled nuclear reactors, and system thereof

    DOE Patents [OSTI]

    Hunsbedt, Anstein; Busboom, Herbert J.

    1991-01-01

    A liquid metal cooled nuclear reactor having a passive cooling system for removing residual heat resulting from fuel decay during reactor shutdown. The passive cooling system comprises a plurality of partitions surrounding the reactor vessel in spaced apart relation forming intermediate areas for circulating heat transferring fluid which remove and carry away heat from the reactor vessel.

  12. Thermostatic Radiator Valve Evaluation

    SciTech Connect (OSTI)

    Dentz, Jordan; Ansanelli, Eric

    2015-01-01

    A large stock of multifamily buildings in the Northeast and Midwest are heated by steam distribution systems. Losses from these systems are typically high and a significant number of apartments are overheated much of the time. Thermostatically controlled radiator valves (TRVs) are one potential strategy to combat this problem, but have not been widely accepted by the residential retrofit market.

  13. Technology Solutions Case Study: Evaluation of Passive Vents in New-Construction Multifamily Buildings

    SciTech Connect (OSTI)

    S. Puttagunta, S. Maxwell, D. Berger, and M. Zuluaga

    2015-10-01

    The Consortium for Advanced Residential Buildings (CARB) conducted research to gain more insight into passive vents. Because passive vents are meant to operate in a general environment of negative apartment pressure, the research assessed whether these negative pressures prevail through a variety of environmental conditions.

  14. Last W56 Warhead Dismantled | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    Last W56 Warhead Dismantled Last W56 Warhead Dismantled Amarillo TX NNSA Administrator Amb. Brooks announced that the last W56 nuclear warhead has been dismantled. The 1960s era system has been safely and securely taken apart and will never again be a part of the U.S. nuclear weapons stockpile

  15. Solid oxide fuel cell generator

    DOE Patents [OSTI]

    Di Croce, A.M.; Draper, R.

    1993-11-02

    A solid oxide fuel cell generator has a plenum containing at least two rows of spaced apart, annular, axially elongated fuel cells. An electrical conductor extending between adjacent rows of fuel cells connects the fuel cells of one row in parallel with each other and in series with the fuel cells of the adjacent row. 5 figures.

  16. Tantalum-copper alloy and method for making

    DOE Patents [OSTI]

    Schmidt, F.A.; Verhoeven, J.D.; Gibson, E.D.

    1983-06-01

    A tantalum-copper alloy can be made by preparing a consumable electrode consisting of an elongated copper billet containing at least two spaced apart tantalum rods extending longitudinally the length of the billet. The electrode is placed in a dc arc furnace and melted under conditions which co-melt the copper and tantalum to form the alloy.

  17. Tantalum-copper alloy and method for making

    DOE Patents [OSTI]

    Schmidt, Frederick A.; Verhoeven, John D.; Gibson, Edwin D.

    1984-11-06

    A tantalum-copper alloy can be made by preparing a consumable electrode consisting of an elongated copper billet containing at least two spaced apart tantalum rods extending longitudinally the length of the billet. The electrode is placed in a dc arc furnace and melted under conditions which co-melt the copper and tantalum to form the alloy.

  18. Copper-tantalum alloy

    DOE Patents [OSTI]

    Schmidt, Frederick A.; Verhoeven, John D.; Gibson, Edwin D.

    1986-07-15

    A tantalum-copper alloy can be made by preparing a consumable electrode consisting of an elongated copper billet containing at least two spaced apart tantalum rods extending longitudinally the length of the billet. The electrode is placed in a dc arc furnace and melted under conditions which co-melt the copper and tantalum to form the alloy.

  19. Solid oxide fuel cell generator

    DOE Patents [OSTI]

    Di Croce, A. Michael; Draper, Robert

    1993-11-02

    A solid oxide fuel cell generator has a plenum containing at least two rows of spaced apart, annular, axially elongated fuel cells. An electrical conductor extending between adjacent rows of fuel cells connects the fuel cells of one row in parallel with each other and in series with the fuel cells of the adjacent row.

  20. Development of a High Fidelity System Analysis Code for Generation IV Reactors

    SciTech Connect (OSTI)

    Hongbin Zhang; Vincent Mousseau; Haihua Zhao

    2008-06-01

    Traditional nuclear reactor system analysis codes such as RELAP and TRAC employ an operator split methodology. In this approach, each of the physics (fluid flow, heat conduction and neutron diffusion) is solved separately and the coupling terms are done explicitly. This approach limits accuracy (first order in time at best) and makes the codes slow in running since the explicit coupling imposes stability restrictions on the time step size. These codes have been extensively tested and validated for the existing LWRs. However, for GEN IV nuclear reactor designs which tend to have long lasting transients resulting from passive safety systems, the performance is questionable and modern high fidelity simulation tools will be required. The requirement for accurate predictability is the motivation for a large scale overhaul of all of the models and assumptions in transient nuclear reactor safety simulation software. At INL we have launched an effort with the long term goal of developing a high fidelity system analysis code that employs modern physical models, numerical methods, and computer science for transient safety analysis of GEN IV nuclear reactors. Modern parallel solution algorithms will be employed through utilizing the nonlinear solution software package PETSc developed by Argonne National Laboratory. The physical models to be developed will have physically realistic length scales and time scales. The solution algorithm will be based on the physics-based preconditioned Jacobian-free Newton-Krylov solution methods. In this approach all of the physical models are solved implicitly and simultaneously in a single nonlinear system. This includes the coolant flow, nonlinear heat conduction, neutron kinetics, and thermal radiation, etc. Including modern physical models and accurate space and time discretizations will allow the simulation capability to be second order accurate in space and in time. This paper presents the current status of the development efforts as well as some results from analyzing a simplified primary system model of GNEP’s advanced burner test reactor (ABTR) designed by Argonne. Various transient analyses are performed with this simplified ABTR model to study two fundamental issues related to system analysis codes – accuracy of numeric algorithm and efficiency. The accuracy study is carried by comparing the second order method with the first order method. The results show that numerical errors in the first order method are large and it is very difficult to distinguish numerical errors from physical modeling errors. On the other hand, second order method yields small numerical errors and it is very easy to spot physical modeling errors. The efficiency study is carried out by comparing the time steps for the fully implicit solution algorithm versus CFL stability limit methods. The dynamic time steps used in a fully implicit method will adjust the time step to resolve the time scale during the various stages of a long lasting transient. This will make a computer code based on fully implicit methods run more efficiently versus a CFL stability limit method code like RELAP, in which a particle of fluid cannot cross a control volume in a single time step.

  1. Product Quality Assurance for Off-Grid Lighting in Africa

    SciTech Connect (OSTI)

    World Bank; Mills, Evan; Mills, Evan

    2008-07-13

    Although the emergence of markets for high efficiency off-grid lighting technologies holds promise, realizing the potential of this opportunity on a long-term, sustainable basis requires careful attention to issues of product quality, consumer protection, and the potential for significant 'market spoiling', in anticipation of increases of sales of low cost, low performance off-grid lighting products. The goal of the Lighting Africa quality assurance workshop was to articulate strategies to mitigate the dangers of market spoiling and to explore ways to protect consumers from misleading advertising for sales of inferior, off-grid lighting products in the context of Lighting Africa's overarching objective to support the industry in developing a robust off-grid lighting market in Africa. The workshop resulted in the identification of two strategic approaches for meeting Lighting Africa quality assurance programmatic needs. The first strategy is intended to meet a short-term programmatic need for quality associated with requests for lighting products by bulk procurement agents, such as in a World Bank-financed project. The development of procurement specifications and test procedures that could be used in a quality/usability screening method in order to provide guidance for forthcoming large volume purchases emerged as the best solution to meet this need. Such approaches are used in World Bank-financed solar home systems (SHSs) projects in Bangladesh, Sri Lanka, and China, among others. However, unlike the SHSs which have multiple balance-of-system (BOS) components warranting the need for an array of specifications for individual components, stand alone lighting systems require specifications that are amenable to individual light points. To test this approach, Lighting Africa elected to use the technical specifications issued by the Photovoltaic Global Approval Program for solar lanterns that use CFL bulbs (PVRS11A) as the basis of qualifying such products. A contract has been competitively awarded to the Global Approval Program for Photovoltaics (PV GAP) under the Lighting Africa Program to select and test ten solar lantern product models. Lantern selection will be determined based on a number of criteria, among them, the ability to provide a daily duty cycle of at least 3 hours of light, the number of days of autonomy of battery, the volume of sales (especially in Africa), and whether or not the manufacturing facility is ISO 9000 certified. Those that are confirmed as meeting the specifications may be eligible to receive a PVGAP quality seal. The work is being carried out in partnership with the Photovoltaic and Wind Quality Test Center in Beijing, China and TUV Rhineland in Koeln, Germany. As off-grid LED-based stand-alone lighting products is in a nascent stage of development compared to CFL-based lanterns, Lighting Africa will support the development of a 'Quality Screening' approach to selecting LED lighting, in order not to delay consumers benefiting from such advances. The screening methodology could be used by procurement agencies to qualify LED lighting products for bulk or programmatic procurements. The main elements of this work comprises of developing a procurement specification and test procedure for undertaking a 'quick' quality/usability screening to be used for procuring LED lights and to test up to 30 LED-based lights to screen products that meet the requirement. The second strategy is intended to meet a longer-term need associated with creating a self-sustaining product quality assurance program that will effectively protect the African consumer, prevent significant market spoiling, adapt with expected technological advancements over the long-term--in other words, give consumers the ability to detect quality products and the information needed to find products that meet their specific needs from among the myriad of lighting products that become available commercially. Workshop discussions and the discussions evolving from the workshop led the Lighting Africa team to opt for an approach similar to that of th

  2. Conservation potential of compact fluorescent lamps in India and Brazil

    SciTech Connect (OSTI)

    Gadgil, A.; Martino Jannuzzi, G. de (Lawrence Berkeley Lab., CA (USA); Universidade Estadual de Campinas, SP (Brazil). Faculdade de Engenharia)

    1989-07-01

    We evaluate the conservation potential of compact fluorescent lamps (CFLs) for managing the rapidly increasing electrical energy and peak demand in India and Brazil. Using very conservative assumptions, we find that the cost of conserved energy using 16 W CFLs is 4 and 6 times less than the long range marginal cost of electricity for the two countries. The cost of avoided peak installed capacity is 6 and 9.5 times less than the cost of new installed capacity for India and Brazil. The analysis is undertaken from the three separate perspectives of the national economies, the consumers, and the utilities. We find that because residential electricity is subsidized, the consumers have little or no incentive to purchase and install the CFLs, unless they too are subsidized. However, the benefits of CFL installation to the utility are so large that subsidizing them is a paying proposition for the utility are so large that subsidizing them is a paying proposition for the utility in almost all cases. As an illustration of a gradual introduction strategy for CFLs, we calculate a scenario where national savings of the order of US $1.2 million per day for India and US $2.5 million per day for Brazil are reached in 10 years by a small and gradual transfer of subsidy from residential electricity to CFLs. We then explore the barriers to immediate large scale introduction of these lamps in the two countries. Specific technical and marketing problems are identified and discussed, which would require solution before such an introduction can be attempted. Lastly, we discuss the range of policy instruments, in addition to a subsidy scheme, that can be used for promoting the diffusion of these lamps in the domestic and commercial sector. 47 refs., 15 figs., 2 tabs.

  3. Comparison of Test Procedures and Energy Efficiency Criteria in Selected International Standards and Labeling Programs for Clothes Washers, Water Dispensers, Vending Machines and CFLs

    SciTech Connect (OSTI)

    Fridley, David; Zheng, Nina; Zhou, Nan

    2010-06-01

    Since the late 1970s, energy labeling programs and mandatory energy performance standards have been used in many different countries to improve the efficiency levels of major residential and commercial equipment. As more countries and regions launch programs covering a greater range of products that are traded worldwide, greater attention has been given to harmonizing the specific efficiency criteria in these programs and the test methods for measurements. For example, an international compact fluorescent light (CFL) harmonization initiative was launched in 2006 to focus on collaboration between Australia, China, Europe and North America. Given the long history of standards and labeling programs, most major energy-consuming residential appliances and commercial equipment are already covered under minimum energy performance standards (MEPS) and/or energy labels. For these products, such as clothes washers and CFLs, harmonization may still be possible when national MEPS or labeling thresholds are revised. Greater opportunity for harmonization exists in newer energy-consuming products that are not commonly regulated but are under consideration for new standards and labeling programs. This may include commercial products such as water dispensers and vending machines, which are only covered by MEPS or energy labels in a few countries or regions. As China continues to expand its appliance standards and labeling programs and revise existing standards and labels, it is important to learn from recent international experiences with efficiency criteria and test procedures for the same products. Specifically, various types of standards and labeling programs already exist in North America, Europe and throughout Asia for products in China's 2010 standards and labeling programs, namely clothes washers, water dispensers, vending machines and CFLs. This report thus examines similarities and critical differences in energy efficiency values, test procedure specifications and other technical performance requirements in existing international programs in order to shed light on where Chinese programs currently stands and considerations for their 2010 programs.

  4. Higher-order compositional modeling of three-phase flow in 3D fractured porous media based on cross-flow equilibrium

    SciTech Connect (OSTI)

    Moortgat, Joachim Firoozabadi, Abbas

    2013-10-01

    Numerical simulation of multiphase compositional flow in fractured porous media, when all the species can transfer between the phases, is a real challenge. Despite the broad applications in hydrocarbon reservoir engineering and hydrology, a compositional numerical simulator for three-phase flow in fractured media has not appeared in the literature, to the best of our knowledge. In this work, we present a three-phase fully compositional simulator for fractured media, based on higher-order finite element methods. To achieve computational efficiency, we invoke the cross-flow equilibrium (CFE) concept between discrete fractures and a small neighborhood in the matrix blocks. We adopt the mixed hybrid finite element (MHFE) method to approximate convective Darcy fluxes and the pressure equation. This approach is the most natural choice for flow in fractured media. The mass balance equations are discretized by the discontinuous Galerkin (DG) method, which is perhaps the most efficient approach to capture physical discontinuities in phase properties at the matrix-fracture interfaces and at phase boundaries. In this work, we account for gravity and Fickian diffusion. The modeling of capillary effects is discussed in a separate paper. We present the mathematical framework, using the implicit-pressure-explicit-composition (IMPEC) scheme, which facilitates rigorous thermodynamic stability analyses and the computation of phase behavior effects to account for transfer of species between the phases. A deceptively simple CFL condition is implemented to improve numerical stability and accuracy. We provide six numerical examples at both small and larger scales and in two and three dimensions, to demonstrate powerful features of the formulation.

  5. Energy Efficiency Through Lighting Upgrades

    SciTech Connect (OSTI)

    Berst, Kara; Howeth, Maria

    2013-02-26

    Lighting upgrades including neon to LED, incandescent to CFL's and T-12 to T-8 and T-5's were completed through this grant. A total of 16 Chickasaw nation facilities decreased their carbon footprint because of these grant funds. Calculations used were based on comparing the energy usage from the previous year's average and the current energy usage. For facilities without a full year's set of energy bills, the month after installation was compared to the same month from the previous year. Overall, the effect the lighting change-outs had for the gaming centers and casinos far exceeded expectations. For the Madill Gaming Center; both an interior and exterior upgrade was performed which resulted in a 31% decrease in energy consumption. This same reduction was seen in every facility that participated in the grant. Just by simply changing out light bulbs to newer energy efficient equivalents, a decrease in energy usage can be achieved and this was validated by the return on investment seen at Chickasaw Nation facilities. Along with the technical project tasks were awareness sessions presented at Chickasaw Head Starts. The positive message of environmental stewardship was passed down to head start students and passed along to Chickasaw employees. Excitement was created in those that learned what they could do to help reduce their energy bills and many followed through and took the idea home. For a fairy low cost, the general public can also use this technique to lower their energy consumption both at home and at work. Although the idea behind the project was somewhat simple, true benefits have been gained through environmental awareness and reductions of energy costs.

  6. Method for control of subsurface coal gasification

    DOE Patents [OSTI]

    Komar, Charles A.

    1976-12-14

    The burn front in an in situ underground coal gasification operation is controlled by utilizing at least two parallel groups of vertical bore holes disposed in the coalbed at spaced-apart locations in planes orthogonal to the plane of maximum permeability in the coalbed. The combustion of the coal is initiated in the coalbed adjacent to one group of the bore holes to establish a combustion zone extending across the group while the pressure of the combustion supporting gas mixture and/or the combustion products is regulated at each well head by valving to control the burn rate and maintain a uniform propagation of the burn front between the spaced-apart hole groups to gasify virtually all the coal lying therebetween.

  7. Multilayer radiation shield

    DOE Patents [OSTI]

    Urbahn, John Arthur; Laskaris, Evangelos Trifon

    2009-06-16

    A power generation system including: a generator including a rotor including a superconductive rotor coil coupled to a rotatable shaft; a first prime mover drivingly coupled to the rotatable shaft; and a thermal radiation shield, partially surrounding the rotor coil, including at least a first sheet and a second sheet spaced apart from the first sheet by centripetal force produced by the rotatable shaft. A thermal radiation shield for a generator including a rotor including a super-conductive rotor coil including: a first sheet having at least one surface formed from a low emissivity material; and at least one additional sheet having at least one surface formed from a low emissivity material spaced apart from the first sheet by centripetal force produced by the rotatable shaft, wherein each successive sheet is an incrementally greater circumferential arc length and wherein the centripetal force shapes the sheets into a substantially catenary shape.

  8. Inertial energy storage device

    DOE Patents [OSTI]

    Knight, Jr., Charles E.; Kelly, James J.; Pollard, Roy E.

    1978-01-01

    The inertial energy storage device of the present invention comprises a composite ring formed of circumferentially wound resin-impregnated filament material, a flanged hollow metal hub concentrically disposed in the ring, and a plurality of discrete filament bandsets coupling the hub to the ring. Each bandset is formed of a pair of parallel bands affixed to the hub in a spaced apart relationship with the axis of rotation of the hub being disposed between the bands and with each band being in the configuration of a hoop extending about the ring along a chordal plane thereof. The bandsets are disposed in an angular relationship with one another so as to encircle the ring at spaced-apart circumferential locations while being disposed in an overlapping relationship on the flanges of the hub. The energy storage device of the present invention has the capability of substantial energy storage due to the relationship of the filament bands to the ring and the flanged hub.

  9. Fuel nozzle assembly for use in turbine engines and methods of assembling same

    DOE Patents [OSTI]

    Uhm, Jong Ho; Johnson, Thomas Edward

    2015-02-03

    A fuel nozzle for use with a turbine engine is described herein. The fuel nozzle includes a housing that is coupled to a combustor liner defining a combustion chamber. The housing includes an endwall that at least partially defines the combustion chamber. A plurality of mixing tubes extends through the housing for channeling fuel to the combustion chamber. Each mixing tube of the plurality of mixing tubes includes an inner surface that extends between an inlet portion and an outlet portion. The outlet portion is oriented adjacent the housing endwall. At least one of the plurality of mixing tubes includes a plurality of projections that extend outwardly from the outlet portion. Adjacent projections are spaced a circumferential distance apart such that a groove is defined between each pair of circumferentially-apart projections to facilitate enhanced mixing of fuel in the combustion chamber.

  10. Photovoltaic solar cell

    DOE Patents [OSTI]

    Nielson, Gregory N; Okandan, Murat; Cruz-Campa, Jose Luis; Resnick, Paul J

    2013-11-26

    A photovoltaic solar cell for generating electricity from sunlight is disclosed. The photovoltaic solar cell comprises a plurality of spaced-apart point contact junctions formed in a semiconductor body to receive the sunlight and generate the electicity therefrom, the plurality of spaced-apart point contact junctions having a first plurality of regions having a first doping type and a second plurality of regions having a second doping type. In addition, the photovoltaic solar cell comprises a first electrical contact electrically connected to each of the first plurality of regions and a second electrical contact electrically connected to each of the second plurality of regions, as well as a passivation layer covering major surfaces and sidewalls of the photovoltaic solar cell.

  11. Photovoltaic solar cell

    DOE Patents [OSTI]

    Nielson, Gregory N; Cruz-Campa, Jose Luis; Okandan, Murat; Resnick, Paul J

    2014-05-20

    A photovoltaic solar cell for generating electricity from sunlight is disclosed. The photovoltaic solar cell comprises a plurality of spaced-apart point contact junctions formed in a semiconductor body to receive the sunlight and generate the electricity therefrom, the plurality of spaced-apart point contact junctions having a first plurality of regions having a first doping type and a second plurality of regions having a second doping type. In addition, the photovoltaic solar cell comprises a first electrical contact electrically connected to each of the first plurality of regions and a second electrical contact electrically connected to each of the second plurality of regions, as well as a passivation layer covering major surfaces and sidewalls of the photovoltaic solar cell.

  12. Flexible cloth seal assembly

    DOE Patents [OSTI]

    Bagepalli, B.S.; Taura, J.C.; Aksit, M.F.; Demiroglu, M.; Predmore, D.R.

    1999-06-29

    A seal assembly is described having a flexible cloth seal which includes a shim assemblage surrounded by a cloth assemblage. A first tubular end portion, such as a gas turbine combustor, includes a longitudinal axis and has smooth and spaced-apart first and second surface portions defining a notch there between which is wider at its top than at its bottom and which extends outward from the axis. The second surface portion is outside curved, and a first edge of the cloth seal is positioned in the bottom of the notch. A second tubular end portion, such as a first stage nozzle, is located near, spaced apart from, and coaxially aligned with, the first tubular end portion. The second tubular end portion has a smooth third surface portion which surrounds at least a portion of the first tubular end portion and which is contacted by the cloth seal. 7 figs.

  13. Micronized coal-fired retrofit system for SO{sub x} reduction - Krakow Clean Fossil Fuels and Energy Efficiency Program.

    SciTech Connect (OSTI)

    1996-09-30

    the project proposes to install a new TCS micronized coal-fired heating plant for the Produkcja I Hodowla Roslin Ogrodniczych (PHRO) Greenhouse Complex, Krzeszowice, Poland (about 20 miles west of Krakow). PHRO currently utilizes 14 heavy oil-fired boilers to produce heat for its greenhouse facilities and also home heating to several adjacent apartment housing complexes. The boilers currently burn a high-sulfur content heavy crude oil, called Mazute. The micronized coal fired boiler would (1) provide a significant portion of the heat for PHRO and a portion of the adjacent apartment housing complexes, (2) dramatically reduce sulfur dioxide air pollution emission, while satisfying new Polish air regulations, and (3) provide attractive savings to PHRO, based on the quantity of displaced oil.

  14. Gas turbine engine combustor can with trapped vortex cavity

    DOE Patents [OSTI]

    Burrus, David Louis; Joshi, Narendra Digamber; Haynes, Joel Meier; Feitelberg, Alan S.

    2005-10-04

    A gas turbine engine combustor can downstream of a pre-mixer has a pre-mixer flowpath therein and circumferentially spaced apart swirling vanes disposed across the pre-mixer flowpath. A primary fuel injector is positioned for injecting fuel into the pre-mixer flowpath. A combustion chamber surrounded by an annular combustor liner disposed in supply flow communication with the pre-mixer. An annular trapped dual vortex cavity located at an upstream end of the combustor liner is defined between an annular aft wall, an annular forward wall, and a circular radially outer wall formed therebetween. A cavity opening at a radially inner end of the cavity is spaced apart from the radially outer wall. Air injection first holes are disposed through the forward wall and air injection second holes are disposed through the aft wall. Fuel injection holes are disposed through at least one of the forward and aft walls.

  15. Insulation assembly for electric machine

    DOE Patents [OSTI]

    Rhoads, Frederick W.; Titmuss, David F.; Parish, Harold; Campbell, John D.

    2013-10-15

    An insulation assembly is provided that includes a generally annularly-shaped main body and at least two spaced-apart fingers extending radially inwards from the main body. The spaced-apart fingers define a gap between the fingers. A slot liner may be inserted within the gap. The main body may include a plurality of circumferentially distributed segments. Each one of the plurality of segments may be operatively connected to another of the plurality of segments to form the continuous main body. The slot liner may be formed as a single extruded piece defining a plurality of cavities. A plurality of conductors (extendable from the stator assembly) may be axially inserted within a respective one of the plurality of cavities. The insulation assembly electrically isolates the conductors in the electric motor from the stator stack and from other conductors.

  16. Field Evaluation of Programmable Thermostats

    SciTech Connect (OSTI)

    Sachs, O.; Tiefenbeck, V.; Duvier, C.; Qin, A.; Cheney, K.; Akers, C.; Roth, K.

    2012-12-01

    Prior research suggests that poor programmable thermostats usability may prevent their effective use to save energy. We hypothesized that home occupants with a high-usability thermostats would be more likely to use them to save energy than people with a basic thermostat. We randomly installed a high-usability thermostat in half the 77 apartments of an affordable housing complex, installing a basic thermostat in the other half. During the heating season, we collected space temperature and furnace on-off data to evaluate occupant interaction with the thermostats, foremost nighttime setbacks. We found that thermostat usability did not influence energy-saving behaviors, finding no significant difference in temperature maintained among apartments with high- and low-usability thermostats.

  17. Compact vacuum insulation embodiments

    DOE Patents [OSTI]

    Benson, D.K.; Potter, T.F.

    1992-04-28

    An ultra-thin compact vacuum insulation panel is comprised of two hard, but bendable metal wall sheets closely spaced apart from each other and welded around the edges to enclose a vacuum chamber. Glass or ceramic spacers hold the wall sheets apart. The spacers can be discrete spherical beads or monolithic sheets of glass or ceramic webs with nodules protruding therefrom to form essentially point' or line' contacts with the metal wall sheets. In the case of monolithic spacers that form line' contacts, two such spacers with the line contacts running perpendicular to each other form effectively point' contacts at the intersections. Corrugations accommodate bending and expansion, tubular insulated pipes and conduits, and preferred applications are also included. 26 figs.

  18. Retrievable fuel pin end member for a nuclear reactor

    DOE Patents [OSTI]

    Rosa, Jerry M.

    1982-01-01

    A bottom end member (17b) on a retrievable fuel pin (13b) secures the pin (13b) within a nuclear reactor (12) by engaging on a transverse attachment rail (18) with a spring clip type of action. Removal and reinstallation if facilitated as only axial movement of the fuel pin (13b) is required for either operation. A pair of resilient axially extending blades (31) are spaced apart to define a slot (24) having a seat region (34) which receives the rail (18) and having a land region (37), closer to the tips (39) of the blades (31) which is normally of less width than the rail (18). Thus an axially directed force sufficient to wedge the resilient blades (31) apart is required to emplace or release the fuel pin (13b) such force being greater than the axial forces on the fuel pins (13b) which occur during operation of the reactor (12).

  19. Drum tie-down apparatus

    DOE Patents [OSTI]

    Morse, Harvey E.

    1984-01-01

    A drum tie-down apparatus for securing drum-like containers in an upright position to a floor or platform of a transportation vehicle having spaced apart cargo tie-down points. The apparatus comprises a pair of cylindrical, hollow tube segments horizontally oriented and engageable with a drum lid adjacent opposite rim edges, flexible strap segments for connecting upper and lower central portions of the tube segments together across the drum lid and a pair of elongated flexible tie-down segments, one extending horizontally through each of the tube segments, the ends thereof being attached to said spaced apart tie-down points such that end portions of the pair of tie-down segments extend downwardly and radially outwardly from the tube segments to the tie-down points.

  20. Programmable nanometer-scale electrolytic metal deposition and depletion

    DOE Patents [OSTI]

    Lee, James Weifu; Greenbaum, Elias

    2002-09-10

    A method of nanometer-scale deposition of a metal onto a nanostructure includes the steps of: providing a substrate having thereon at least two electrically conductive nanostructures spaced no more than about 50 .mu.m apart; and depositing metal on at least one of the nanostructures by electric field-directed, programmable, pulsed electrolytic metal deposition. Moreover, a method of nanometer-scale depletion of a metal from a nanostructure includes the steps of providing a substrate having thereon at least two electrically conductive nanostructures spaced no more than about 50 .mu.m apart, at least one of the nanostructures having a metal disposed thereon; and depleting at least a portion of the metal from the nanostructure by electric field-directed, programmable, pulsed electrolytic metal depletion. A bypass circuit enables ultra-finely controlled deposition.

  1. Apparatus and method for igniting an in situ oil shale retort

    DOE Patents [OSTI]

    Chambers, Carlon C.

    1981-01-01

    A method and apparatus for conducting such method are disclosed for igniting a fragmented permeable mass of formation particles in an in situ oil shale retort. The method is conducted by forming a hole through unfragmented formation to the fragmented mass. An oxygen-containing gas is introduced into the hole. A fuel is introduced into a portion of the hole spaced apart from the fragmented mass. The fuel and oxygen-containing gas mix forming a combustible mixture which is ignited for establishing a combustion zone in a portion of the hole spaced apart from the fragmented mass. The hot gas generated in the combustion zone is conducted from the hole into the fragmented mass for heating a portion of the fragmented mass above an ignition temperature of oil shale.

  2. Substantially parallel flux uncluttered rotor machines

    SciTech Connect (OSTI)

    Hsu, John S.

    2012-12-11

    A permanent magnet-less and brushless synchronous system includes a stator that generates a magnetic rotating field when sourced by polyphase alternating currents. An uncluttered rotor is positioned within the magnetic rotating field and is spaced apart from the stator. An excitation core is spaced apart from the stator and the uncluttered rotor and magnetically couples the uncluttered rotor. The brushless excitation source generates a magnet torque by inducing magnetic poles near an outer peripheral surface of the uncluttered rotor, and the stator currents also generate a reluctance torque by a reaction of the difference between the direct and quadrature magnetic paths of the uncluttered rotor. The system can be used either as a motor or a generator

  3. Compact vacuum insulation

    DOE Patents [OSTI]

    Benson, David K.; Potter, Thomas F.

    1993-01-01

    An ultra-thin compact vacuum insulation panel is comprised of two hard, but bendable metal wall sheets closely spaced apart from each other and welded around the edges to enclose a vacuum chamber. Glass or ceramic spacers hold the wall sheets apart. The spacers can be discrete spherical beads or monolithic sheets of glass or ceramic webs with nodules protruding therefrom to form essentially "point" or "line" contacts with the metal wall sheets. In the case of monolithic spacers that form "line" contacts, two such spacers with the line contacts running perpendicular to each other form effectively "point" contacts at the intersections. Corrugations accommodate bending and expansion, tubular insulated pipes and conduits, and preferred applications are also included.

  4. Compact vacuum insulation embodiments

    DOE Patents [OSTI]

    Benson, David K.; Potter, Thomas F.

    1992-01-01

    An ultra-thin compact vacuum insulation panel is comprised of two hard, but bendable metal wall sheets closely spaced apart from each other and welded around the edges to enclose a vacuum chamber. Glass or ceramic spacers hold the wall sheets apart. The spacers can be discrete spherical beads or monolithic sheets of glass or ceramic webs with nodules protruding therefrom to form essentially "point" or "line" contacts with the metal wall sheets. In the case of monolithic spacers that form "line" contacts, two such spacers with the line contacts running perpendicular to each other form effectively "point" contacts at the intersections. Corrugations accommodate bending and expansion, tubular insulated pipes and conduits, and preferred applications are also included.

  5. Air conditioning system

    DOE Patents [OSTI]

    Lowenstein, Andrew; Miller, Jeffrey; Gruendeman, Peter; DaSilva, Michael

    2005-02-01

    An air conditioner comprises a plurality of plates arranged in a successively stacked configuration with portions thereof having a spaced apart arrangement, and defining between successive adjacent pairs of plates at the spaced apart portions a first and second series of discrete alternating passages wherein a first air stream is passed through the first series of passages and a second air stream is passed through the second series of passages; and said stacked configuration of plates forming integrally therewith a liquid delivery means for delivering from a source a sufficient quantity of a liquid to the inside surfaces of the first series of fluid passages in a manner which provides a continuous flow of the liquid from a first end to a second end of the plurality of plates while in contact with the first air stream.

  6. Flexible cloth seal assembly

    DOE Patents [OSTI]

    Bagepalli, Bharat Sampathkumar; Taura, Joseph Charles; Aksit, Mahmut Faruk; Demiroglu, Mehmet; Predmore, Daniel Ross

    1999-01-01

    A seal assembly having a flexible cloth seal which includes a shim assemblage surrounded by a cloth assemblage. A first tubular end portion, such as a gas turbine combustor, includes a longitudinal axis and has smooth and spaced-apart first and second surface portions defining a notch therebetween which is wider at its top than at its bottom and which extends outward from the axis. The second surface portion is outside curved, and a first edge of the cloth seal is positioned in the bottom of the notch. A second tubular end portion, such as a first stage nozzle, is located near, spaced apart from, and coaxially aligned with, the first tubular end portion. The second tubular end portion has a smooth third surface portion which surrounds at least a portion of the first tubular end portion and which is contacted by the cloth seal.

  7. Compact vacuum insulation

    DOE Patents [OSTI]

    Benson, D.K.; Potter, T.F.

    1993-01-05

    An ultra-thin compact vacuum insulation panel is comprised of two hard, but bendable metal wall sheets closely spaced apart from each other and welded around the edges to enclose a vacuum chamber. Glass or ceramic spacers hold the wall sheets apart. The spacers can be discrete spherical beads or monolithic sheets of glass or ceramic webs with nodules protruding therefrom to form essentially point'' or line'' contacts with the metal wall sheets. In the case of monolithic spacers that form line'' contacts, two such spacers with the line contacts running perpendicular to each other form effectively point'' contacts at the intersections. Corrugations accommodate bending and expansion, tubular insulated pipes and conduits, and preferred applications are also included.

  8. PV module mounting method and mounting assembly

    DOE Patents [OSTI]

    Lenox, Carl J.S.; Johnson, Kurt M.

    2013-04-23

    A method for mounting PV modules to a deck includes selecting PV module layout pattern so that adjacent PV module edges are spaced apart. PV mounting and support assemblies are secured to the deck according to the layout pattern using fasteners extending into the deck. The PV modules are placed on the PV mounting and support assemblies. Retaining elements are located over and secured against the upper peripheral edge surfaces of the PV modules so to secure them to the deck with the peripheral edges of the PV modules spaced apart from the deck. In some examples a PV module mounting assembly, for use on a shingled deck, comprises flashing, a base mountable on the flashing, a deck-penetrating fastener engageable with the base and securable to the deck so to secure the flashing and the base to the shingled deck, and PV module mounting hardware securable to the base.

  9. Stationary semi-solid battery module and method of manufacture

    DOE Patents [OSTI]

    Slocum, Alexander; Doherty, Tristan; Bazzarella, Ricardo; Cross, III, James C.; Limthongkul, Pimpa; Duduta, Mihai; Disko, Jeffry; Yang, Allen; Wilder, Throop; Carter, William Craig; Chiang, Yet-Ming

    2015-12-01

    A method of manufacturing an electrochemical cell includes transferring an anode semi-solid suspension to an anode compartment defined at least in part by an anode current collector and an separator spaced apart from the anode collector. The method also includes transferring a cathode semi-solid suspension to a cathode compartment defined at least in part by a cathode current collector and the separator spaced apart from the cathode collector. The transferring of the anode semi-solid suspension to the anode compartment and the cathode semi-solid to the cathode compartment is such that a difference between a minimum distance and a maximum distance between the anode current collector and the separator is maintained within a predetermined tolerance. The method includes sealing the anode compartment and the cathode compartment.

  10. Permanent-magnet-less machine having an enclosed air gap

    DOE Patents [OSTI]

    Hsu, John S.

    2013-03-05

    A permanent magnet-less, brushless synchronous system includes a stator that generates a magnetic rotating field when sourced by an alternating current. An uncluttered rotor disposed within the magnetic rotating field is spaced apart from the stator to form an air gap relative to an axis of rotation. A stationary excitation core spaced apart from the uncluttered rotor by an axial air gap and a radial air gap substantially encloses the stationary excitation core. Some permanent magnet-less, brushless synchronous systems include stator core gaps to reduce axial flux flow. Some permanent magnet-less, brushless synchronous systems include an uncluttered rotor coupled to outer laminations. The quadrature-axis inductance may be increased in some synchronous systems. Some synchronous systems convert energy such as mechanical energy into electrical energy (e.g., a generator); other synchronous systems may convert any form of energy into mechanical energy (e.g., a motor).

  11. Permanent-magnet-less machine having an enclosed air gap

    DOE Patents [OSTI]

    Hsu, John S.

    2012-02-07

    A permanent magnet-less, brushless synchronous system includes a stator that generates a magnetic rotating field when sourced by an alternating current. An uncluttered rotor disposed within the magnetic rotating field is spaced apart from the stator to form an air gap relative to an axis of rotation. A stationary excitation core spaced apart from the uncluttered rotor by an axial air gap and a radial air gap substantially encloses the stationary excitation core. Some permanent magnet-less, brushless synchronous systems include stator core gaps to reduce axial flux flow. Some permanent magnet-less, brushless synchronous systems include an uncluttered rotor coupled to outer laminations. The quadrature-axis inductance may be increased in some synchronous systems. Some synchronous systems convert energy such as mechanical energy into electrical energy (e.g., a generator); other synchronous systems may convert any form of energy into mechanical energy (e.g., a motor).

  12. Muscle-driven nanogenerators

    DOE Patents [OSTI]

    Wang, Zhong L.; Yang, Rusen

    2011-03-01

    In a method of generating electricity, a plurality of living cells are grown on an array of piezoelectric nanowires so that the cells engage the piezoelectric nanowires. Induced static potentials are extracted from at least one of the piezoelectric nanowires when at least one of the cells deforms the at least one of the piezoelectric nanowires. A cell-driven electrical generator that includes a substrate and a plurality of spaced-apart piezoelectric nanowires disposed on the substrate. A plurality of spaced-apart conductive electrodes interact with the plurality of piezoelectric nanowires. A biological buffer layer that is configured to promote growth of cells is disposed on the substrate so that cells placed on the substrate will grow and engage the piezoelectric nanowires.

  13. Alternative Fuels Data Center

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Electric Vehicle Supply Equipment (EVSE) Policies for Multi-Unit Dwellings A common interest development, including a community apartment, condominium, and cooperative development, may not prohibit or restrict the installation or use of EVSE in a homeowner's designated parking space. These entities may put reasonable restrictions on EVSE, but the policies may not significantly increase the cost of the EVSE or significantly decrease its efficiency or performance. If installation in the

  14. TableHC2.12.xls

    U.S. Energy Information Administration (EIA) Indexed Site

    Table HC2.12 Home Electronics Usage Indicators by Type of Housing Unit, 2005 5 or More Units Mobile Homes Type of Housing Unit Housing Units (millions) Single-Family Units Apartments in Buildings With-- Home Electonics Usage Indicators Detached Attached 2 to 4 Units Energy Information Administration: 2005 Residential Energy Consumption Survey: Preliminary Housing Characteristics Tables Million U.S. Housing Units Table HC2.12 Home Electronics Usage Indicators by Type of Housing Unit, 2005 5 or

  15. Total...........................................................

    U.S. Energy Information Administration (EIA) Indexed Site

    Q Table HC3.2 Living Space Characteristics by Owner-Occupied Housing Units, 2005 2 to 4 Units 5 or More Units Mobile Homes Million U.S. Housing Units Owner- Occupied Housing Units (millions) Type of Owner-Occupied Housing Unit Housing Units (millions) Single-Family Units Apartments in Buildings With-- Living Space Characteristics Detached Attached Energy Information Administration 2005 Residential Energy Consumption Survey: Preliminary Housing Characteristics Tables Table HC3.2 Living Space

  16. Field Evaluation of Programmable Thermostats

    SciTech Connect (OSTI)

    Sachs, O.; Tiefenbeck, V.; Duvier, C.; Qin, A.; Cheney, K.; Akers, C.; Roth, K.

    2012-12-01

    Prior research suggests that poor programmable thermostats usability may prevent their effective use to save energy. The Fraunhofer team hypothesized that home occupants with high-usability thermostats would be more likely to use them to save energy than people with a basic thermostats. In this report, the team discusses results of a project in which the team monitored and compared programmable thermostats with basic thermostats in an affordable housing apartment complex.

  17. Micropole undulator

    DOE Patents [OSTI]

    Tatchyn, R.O.; Csonka, P.L.; Cremer, J.T.

    1990-12-11

    Micropole undulators for use in the generation of x-rays from moving charged particles are disclosed. Two rows of spaced apart poles are arranged so that each pole produces a magnetic field aligned with all other similar fields. The poles are the ends of C''-shaped magnets. In each row, adjacent poles are separated by spacers made of a superconducting material. 11 figs.

  18. SSRL HEADLINES May 2007

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    1 May, 2007 __________________________________________________________________________ Contents of this Issue: Science Highlight - Mapping Cellular Nutrient Highways Science Highlight - How to Turn Carbon into a Magnet? X-rays and Protons Give the Answer! Atoms Fly Apart in Direct Crystal Melting New X-ray Photon Correlation Spectroscopy and Lensless Imaging Capabilities June 9 Memorial Service for Jim Patel Wrap-up on Second Annual SSRL School on Synchrotron X-ray Scattering Techniques in

  19. Interpolatability distinguishes LOCC from separable von Neumann measurements

    SciTech Connect (OSTI)

    Childs, Andrew M.; Leung, Debbie; Man?inska, Laura; Institute for Quantum Computing, University of Waterloo, Waterloo, Ontario N2L 3G1 ; Ozols, Maris; Institute for Quantum Computing, University of Waterloo, Waterloo, Ontario N2L 3G1; IBM TJ Watson Research Center, Yorktown Heights, New York 10598

    2013-11-15

    Local operations with classical communication (LOCC) and separable operations are two classes of quantum operations that play key roles in the study of quantum entanglement. Separable operations are strictly more powerful than LOCC, but no simple explanation of this phenomenon is known. We show that, in the case of von Neumann measurements, the ability to interpolate measurements is an operational principle that sets apart LOCC and separable operations.

  20. Making an Impact on Energy Use in Illinois | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Making an Impact on Energy Use in Illinois Making an Impact on Energy Use in Illinois For building owners and contractors, making energy efficiency improvements to a property is a good idea, right? Check. How about making cost-effective energy efficiency improvements that reduce operating and maintenance costs and provide comfortable apartments for tenants, all made possible by low-cost financing? Checkmate. As a seasoned property manager with more than 25 years in the business, John Brauc of

  1. Better Buildings Challenge Expands to Multifamily Housing | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Better Buildings Challenge Expands to Multifamily Housing Better Buildings Challenge Expands to Multifamily Housing December 4, 2013 - 12:00am Addthis The U.S. Departments of Energy and Housing and Urban Development on December 3 expanded the Better Buildings Challenge to multifamily housing such as apartments and condominiums. The departments also launched the Better Buildings Accelerators to support efforts led by state and local governments to cut energy waste and eliminate market

  2. Building America Technology Solutions for New and Existing Homes:

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Predicting Envelope Leakage in Attached Dwellings (Fact Sheet) | Department of Energy Predicting Envelope Leakage in Attached Dwellings (Fact Sheet) Building America Technology Solutions for New and Existing Homes: Predicting Envelope Leakage in Attached Dwellings (Fact Sheet) In an attempt to create a simplified tool for predicting leakage to the outside, the CARB team analyzed blower door test results from 236 attached dwelling units in 17 apartment complexes to investigate the correlation

  3. Building America Update: August 2015 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Update: August 2015 Building America Update: August 2015 August 12, 2015 - 5:31pm Addthis Conway Street Deep Energy Retrofit: Transforming a School into High-Performance Apartments Building America August 26 Webinar: Ventilation Strategies for High-Performance Homes, Part I-Application-Specific Ventilation Building America Solution Center: How-To Videos Expand Knowledge of High-Performance Homes Who Is Building the Best-Performing Homes in the Country? Find Out with DOE's Tour of Zero Notice of

  4. Building America Whole-House Solutions for Existing Homes: Evaluation of a

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Multifamily Retrofit | Department of Energy a Multifamily Retrofit Building America Whole-House Solutions for Existing Homes: Evaluation of a Multifamily Retrofit A 37-unit apartment complex underwent multiple energy retrofit measures, including attic and wall insulation, low-e windows, and energy-efficient appliances, to comply with the Boulder SmartRegs Ordinance. PDF icon Evaluation of a Multifamily Retrofit in Climate Zone 5 - Boulder, Colorado More Documents & Publications Building

  5. Spinor matter in a particular 5-dimensional projective unified field theory

    SciTech Connect (OSTI)

    Schmutzer, E.

    1985-05-01

    After presenting the foundation and the basic equations of a new 5-dimensional projective unified field theory, the problem of incorporating spinor fields into this framework is investigated. Apart from Paulis method, we propose a new approach which leads to a consistent 5-dimensional spinor theory with a series of physical consequences (variability of the 4-dimensional ''rest mass,'' instability of 4-dimensional ''stationary states,'' etc.).

  6. Method of and apparatus for supporting an overburden

    SciTech Connect (OSTI)

    Spies, K.

    1981-02-10

    A method and an arrangement are disclosed for supporting a roof of an underground excavation. A hollow prop casing of two or more telescopable sections is erected and telescoped apart until it bears on the floor and the roof. The sections are then biased against the floor and the roof and the prop casing is filled with a hardenable substance which upon hardening forms in the casing a solid column capable of supporting the roof.

  7. Overview of recent U235 neutron cross section evaluation work

    SciTech Connect (OSTI)

    Lubitz, C. [Lockheed Martin Corp., Schenectady, NY (United States)

    1998-10-01

    This report is an overview (through 1997) of the U235 neutron cross section evaluation work at Oak Ridge National Laboratory (ORNL), AEA Technology (Harwell) and Lockheed Martin Corp.-Schenectady (LMS), which has influenced, or appeared in, ENDF/B-VI through Release 5. The discussion is restricted to the thermal and resolved resonance regions, apart from some questions about the unresolved region which still need investigation. The important role which benchmark testing has played will be touched on.

  8. DOE Zero Energy Ready Home Case Study: Mutual Housing California, Mutual

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Housing at Spring Lake, Woodland, CA | Department of Energy Mutual Housing California, Mutual Housing at Spring Lake, Woodland, CA DOE Zero Energy Ready Home Case Study: Mutual Housing California, Mutual Housing at Spring Lake, Woodland, CA DOE Zero Energy Ready Home Case Study: Mutual Housing California, Mutual Housing at Spring Lake, Woodland, CA Case study of a DOE 2015 Housing Innovation Award winning multifamily project of 62 affordable-housing apartment home in the hot-dry climate that

  9. Environmental Sustainability Stories

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Stories /environment/_assets/images/icon_earthday.jpg Environmental Stories Our environmental stewardship commitment: we will cleanup the past, minimize impacts for current environmental operations, and create a sustainable future. An enzyme (shown in blue) pulls out individual cellulose chains (pink) from the pretreated nanofiber surface (green) and then breaks them apart into simple sugars. Image credit, Shishir Chundawat, Great Lakes Bioenergy Research Center. Less is more: Novel cellulose

  10. Mr. Harry S. Cohen

    Office of Legacy Management (LM)

    a50b Mr. Harry S. Cohen 2956 Hathaway Road Apartment 1105 ' Richmond, Virginia 23225 Dear Mr. Cohen: ..:: The Department of Energy (DOE), as part of its Formerly Utilized Sites Remedial Action Program (FUSRAP), has reviewed information on the former site of the Virginia-Carolina Chemical Corporation, located.at @I8 Perry Street in Richmond, Virginia, to determine whether It contains residual radioactivity traceable to activities conducted on behalf of the Manhattan Engineer District and the

  11. EERE Success Story-New Jersey: Reducing Energy Bills for Camden's

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Families | Department of Energy Reducing Energy Bills for Camden's Families EERE Success Story-New Jersey: Reducing Energy Bills for Camden's Families April 25, 2013 - 12:58pm Addthis The Northgate II, a 308-unit apartment building, was treated with Aeroseal, thanks to a grant from New Jersey's Multifamily Weatherization Assistance Program. Aeroseal, developed at DOE's Lawrence Berkeley National Laboratory by Dr. Mark Modera, uses airborne adhesive particles to seal leaky air ducts. The

  12. 14-plex Feasibility Report

    SciTech Connect (OSTI)

    Kotongan, Victoria Hazel

    2013-06-21

    The Native Village of Unalakleet project was a feasibility study for a retrofit of a “tribally owned” three story, 14 apartment complex located in Unalakleet, Alaska. The program objective and overall goal was to create a plan for retrofitting to include current appraised value and comparable costs of new construction to determine genuine feasibility as low-income multi-family housing for tribal members.

  13. DETECTION OF THE COMPRESSED PRIMARY STELLAR WIND IN {eta} CARINAE

    SciTech Connect (OSTI)

    Teodoro, M.; Madura, T. I.; Gull, T. R.; Corcoran, M. F.; Hamaguchi, K.

    2013-08-10

    A series of three Hubble Space Telescope/Space Telescope Imaging Spectrograph spectroscopic mappings, spaced approximately one year apart, reveal three partial arcs in [Fe II] and [Ni II] emissions moving outward from {eta} Carinae. We identify these arcs with the shell-like structures, seen in the three-dimensional hydrodynamical simulations, formed by compression of the primary wind by the secondary wind during periastron passages.

  14. Million U.S. Housing Units Total............................................................................

    U.S. Energy Information Administration (EIA) Indexed Site

    Attached 2 to 4 Units Table HC2.12 Home Electronics Usage Indicators by Type of Housing Unit, 2005 5 or More Units Mobile Homes Type of Housing Unit Housing Units (millions) Single-Family Units Apartments in Buildings With-- Home Electronics Usage Indicators Detached Energy Information Administration: 2005 Residential Energy Consumption Survey: Preliminary Housing Characteristics Tables Million U.S. Housing Units Attached 2 to 4 Units Table HC2.12 Home Electronics Usage Indicators by Type of

  15. Existing Whole-House Solutions Case Study: Evaluation of a Multifamily Retrofit in Climate Zone 5, Boulder, Colorado

    SciTech Connect (OSTI)

    2013-11-01

    In 2009, a 37-unit apartment complex located in Boulder, Colorado, underwent an energy retrofit to comply with Boulder SmartRegs Ordinance, a mandate that requires all rental properties to meet certain energy efficiency standards by 2018. The Consortium of Advanced Residential Buildings (CARB), a U.S. Department of Energy Building America team, worked with city planners and building owners to evaluate this program and recently completed a case study evaluating the effectiveness of a collection of retrofit measures.

  16. ORISE Undergraduate Student Research Experiences: Christopher Tomkins-Tinch

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Christopher Tomkins-Tinch Intern leverages data to support rapid response to biological threats Christopher Tomkins-Tinch Christopher Tomkins-Tinch's research conducted at Oak Ridge National Laboratory's Undergraduate Co-op program could help the U.S. government fight biological weapons of mass destruction. Click image to enlarge. In his spare time, Christopher Tomkins-Tinch is a do-it-yourselfer, who likes to take things apart. This past summer, he gained knowledge to help him put together the

  17. Face seal assembly for rotating drum

    DOE Patents [OSTI]

    Morgan, J. Giles; Rennich, Mark J.; Whatley, Marvin E.

    1982-01-01

    A seal assembly comprises a tube rotatable about its longitudinal axis and having two longitudinally spaced flanges projecting radially outwardly from the outer surface thereof. Slidably positioned against one of the flanges is a seal ring, and disposed between this seal ring and the other flange are two rings that are forced apart by springs, one of the latter rings being attached to a flexible wall.

  18. Modified Yeast with Enhanced Tolerance for GVL Biomass Solvent - Energy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Innovation Portal Modified Yeast with Enhanced Tolerance for GVL Biomass Solvent Great Lakes Bioenergy Research Center Contact GLBRC About This Technology Technology Marketing Summary Gamma-valerolactone (GVL) is an inexpensive solvent derived from biomass that can be used to break apart tough lignocellulose into fermentable sugars including xylose and glucose. GVL-based techniques are a potentially transformative breakthrough in biofuel production (for more information see WARF reference

  19. Neutron flux profile monitor for use in a fission reactor

    DOE Patents [OSTI]

    Kopp, Manfred K.; Valentine, Kenneth H.

    1983-01-01

    A neutron flux monitor is provided which consists of a plurality of fission counters arranged as spaced-apart point detectors along a delay line. As a fission event occurs in any one of the counters, two delayed current pulses are generated at the output of the delay line. The time separation of the pulses identifies the counter in which the particular fission event occured. Neutron flux profiles of reactor cores can be more accurately measured as a result.

  20. CAMD Nanofabrication Infrastructure

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    News :: Links :: The facility houses equipment such as glove box, fume hoods, oxygen-free nanopure water system and ultrasonic processors. Schlenk-type techniques are routinely used for carrying out air & moisture sensitive reactions. It provides opportunities for synthesis of nanoparticles, core-shell nanoparticles, metal-polymer nanocomposites and their characterization. Apart from having well equipped wet chemical laboratory Nano Fabrication Facility utilizes DCM beamline, where X-ray

  1. Probabilistic seismic risk of the territory of Bishkek city, Kyrgyzstan

    SciTech Connect (OSTI)

    Kamchybekov, Murataly Pakirovich

    2008-07-08

    For seismic risk analysis were gathered information about district's seismicity, tectonics, topography, and engineering--geotechnical conditions, which present in apartments, infrastructures and demographies. All of these informations are joined within the limits of GIS for father probabilistic evaluations from different losses levels from earthquake, and also definitions of effective arrangements by reaction. There were given analysis of obtained results with the purpose to take into the consideration and falling of seismic risk's levels.

  2. DOE ZERH Case Study: Mutual Housing California, Mutual Housing at Spring Lake, Woodland, CA

    SciTech Connect (OSTI)

    none,

    2015-09-01

    Case study of a DOE 2015 Housing Innovation Award winning multifamily project of 62 affordable-housing apartment home in the hot-dry climate that exceeded CA Title 24-2008 by 35%, with 2x4 16” on center walls with R-21 fiberglass bass walls, uninsulated salb on grade foundation; vented attic with R-44 blown fiberglass; air to water heat pumps.

  3. Idaho National Engineering and Environmental Laboratory Awarded VPP Gold Star

    Broader source: Energy.gov [DOE]

    Our journey to safety excellence began some six (6) years ago. The task seemed ominous with 6000 plus employees ranging from administrative assistants and craftsman to research scientists and engineers. Another challenge was the geographic dispersion of work areas being as much as 50 miles apart. A core group of employees caught the vision and knew that it could be done, and it is that perseverance that has lead the INEEL to the DOE-VPP Gold Star.

  4. Alternative Fuels Data Center

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Public Electric Vehicle Supply Equipment (EVSE) Funding - NIPSCO NIPSCO's IN-Charge Around Town Electric Vehicle Program (Program) offers funding for the cost of up to two public EVSE, specifically for universities, workplaces, apartments, governmental public areas, major transportation corridors, and commercial and retail locations. NIPSCO offers 50% of the cost to purchase and install qualified public EVSE, up to $3,000 for Level 2 and up to $37,500 for DC fast. The Program is in effect until

  5. Less is more: Novel cellulose structure requires fewer enzymes to process

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    biomass to fuel Cellulose requires fewer enzymes to process biomass to fuel Less is more: Novel cellulose structure requires fewer enzymes to process biomass to fuel Improved methods for breaking down cellulose nanofibers are central to cost-effective biofuel production. June 19, 2013 An enzyme (shown in blue) pulls out individual cellulose chains (pink) from the pretreated nanofiber surface (green) and then breaks them apart into simple sugars. Image credit, Shishir Chundawat, Great Lakes

  6. Less is more: Novel cellulose structure requires fewer enzymes to process

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    biomass to fuel Cellulose requires fewer enzymes to process biomass to fuel Less is more: Novel cellulose structure requires fewer enzymes to process biomass to fuel Improved methods for breaking down cellulose nanofibers are central to cost-effective biofuel production. June 19, 2013 An enzyme (shown in blue) pulls out individual cellulose chains (pink) from the pretreated nanofiber surface (green) and then breaks them apart into simple sugars. Image credit, Shishir Chundawat, Great Lakes

  7. Building America Case Study: Design Guidance for Passive Vents in New Construction Multifamily Buildings, New York, New York (Fact Sheet), Efficient Solutions for Multifamily Buildings, Energy Efficiency & Renewable Energy (EERE)

    Energy Savers [EERE]

    Multifamily Buildings Building America Case Study Design Guidance for Passive Vents in New Construction, Multifamily Buildings New York, New York PROJECT INFORMATION Construction: New dwelling units Type: Multifamily Topic: Passive ventilation performance Date completed: 2014 Climate Zones: Mixed, humid, cold PERFORMANCE CRITERIA * Continuous exhaust: >3 × required ASHRAE 62.2 outdoor air CFM * Apartment airtightness: ≤0.20 CFM50/ft 2 of enclosure * Entry door leakage area: ≤5 in. 2 *

  8. Building America Case Study: Low-Load Space-Conditioning Needs Assessment, Northeast and Mid-Atlantic (Fact Sheet), Technology Solutions for New and Existing Homes, Energy Efficiency & Renewable Energy (EERE)

    Energy Savers [EERE]

    Low-Load Space-Conditioning Needs Assessment Northeast and Mid-Atlantic PROJECT INFORMATION Construction: New Type: Multifamily apartments, attached single-family dwellings Consortium for Advanced Residential Buildings, carb-swa.com Building Component: Space conditioning Size: 209 ft 2 -2,895 ft 2 Climate Zones: Cold, mixed-humid DATABASE ATTRIBUTES * Dwelling unit characteristics: Location, floor level, position, square footage, volume, total and exposed enclosure area, window-to-wall ratio,

  9. Microsoft Word - Souliotis_abs_2011

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    neutron-rich nuclei towards the r-process path in peripheral heavy-ion collisions at 15 MeV/nucleon Professor George A. Souliotis Laboratory of Physical Chemistry, Department of Chemistry, National and Kapodistrian University of Athens, Athens 15771 Greece, and Cyclotron Institute, Texas A&M University, College Station, Texas 77843. Abstract Neutron-rich nuclides have traditionally been produced in spallation reactions, fission and "cold'' projectile fragmentation. Apart from these main

  10. Thermionic converter

    DOE Patents [OSTI]

    Fitzpatrick, G.O.

    1987-05-19

    A thermionic converter is set forth which includes an envelope having an electron collector structure attached adjacent to a wall. An electron emitter structure is positioned adjacent the collector structure and spaced apart from opposite wall. The emitter and collector structures are in a common chamber. The emitter structure is heated substantially only by thermal radiation. Very small interelectrode gaps can be maintained utilizing the thermionic converter whereby increased efficiency results. 10 figs.

  11. Neutron-flux profile monitor for use in a fission reactor

    DOE Patents [OSTI]

    Kopp, M.K.; Valentine, K.H.

    1981-09-15

    A neutron flux monitor is provided which consists of a plurality of fission counters arranged as spaced-apart point detectors along a delay line. As a fission event occurs in any one of the counters, two delayed current pulses are generated at the output of the delay line. The time separation of the pulses identifies the counter in which the particular fission event occurred. Neutron flux profiles of reactor cores can be more accurately measured as a result.

  12. News Item

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Electron Microscopy Discovers Peptoid Crystalline Nanotubes (a) Cryogenic electron micrographs of crystalline peptoid nanotubes in water, revealing stripes spaced 2.4 nm apart. (b) Molecular model showing how the peptoid chains act as molecular tile units that form crystalline, brick-like lattices that roll into nanotubes, and expose both hydrophobic and hydrophilic groups to water. Scientific Achievement Electron micrographs of amphiphilic peptoids in water reveal crystalline nanotubes with

  13. Extraction electrode geometry for a calutron

    DOE Patents [OSTI]

    Veach, A.M.; Bell, W.A. Jr.

    1975-09-23

    This patent relates to an improved geometry for the extraction electrode and the ground electrode utilized in the operation of a calutron. The improved electrodes are constructed in a partial-picture-frame fashion with the slits of both electrodes formed by two tungsten elongated rods. Additional parallel spaced-apart rods in each electrode are used to establish equipotential surfaces over the rest of the front of the ion source. (auth)

  14. Los Alamos researchers uncover new origins of radiation-tolerant materials

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Researchers uncover new origins of radiation-tolerant materials Los Alamos researchers uncover new origins of radiation-tolerant materials A new report this week in the journal Nature Communications provides new insight into what, exactly, makes some complex materials radiation tolerant. November 1, 2015 Los Alamos National Laboratory scientists are exploring how certain materials fall apart under irradiation, while others retain their stable. Both nuclear fuels and nuclear waste storage could

  15. Evaluation of a Multifamily Retrofit in Climate Zone 5, Boulder, Colorado (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2013-11-01

    In 2009, a 37-unit apartment complex located in Boulder, Colorado, underwent an energy retrofit to comply with Boulder SmartRegs Ordinance, a mandate that requires all rental properties to meet certain energy efficiency standards by 2018. The Consortium of Advanced Residential Buildings (CARB), a U.S. Department of Energy Building America team, worked with city planners and building owners to evaluate this program and recently completed a case study evaluating the effectiveness of a collection of retrofit measures.

  16. Hot-filament chemical vapor deposition chamber and process with multiple gas inlets

    DOE Patents [OSTI]

    Deng, Xunming; Povolny, Henry S.

    2004-06-29

    A thin film deposition method uses a vacuum confinement cup that employs a dense hot filament and multiple gas inlets. At least one reactant gas is introduced into the confinement cup both near and spaced apart from the heated filament. An electrode inside the confinement cup is used to generate plasma for film deposition. The method is used to deposit advanced thin films (such as silicon based thin films) at a high quality and at a high deposition rate.

  17. Magnetic coupling device

    DOE Patents [OSTI]

    Nance, Thomas A.

    2009-08-18

    A quick connect/disconnect coupling apparatus is provided in which a base member is engaged by a locking housing through a series of interengagement pins. The pins maintain the shaft in a locked position. Upon exposure to an appropriately positioned magnetic field, pins are removed a sufficient distance such that the shaft may be withdrawn from the locking housing. The ability to lock and unlock the connector assembly requires no additional tools or parts apart from a magnetic key.

  18. " Million Housing Units, Final"

    U.S. Energy Information Administration (EIA) Indexed Site

    2 Appliances in U.S. Homes, by Owner/Renter Status, 2009" " Million Housing Units, Final" ,,,,"Housing Unit Type" ,,,,"Single-Family Units",,,,"Apartments in Buildings With" ,"Total U.S.1 (millions)",,,"Detached",,"Attached",,"2 to 4 Units",,"5 or More Units",,"Mobile Homes"

  19. " Million Housing Units, Final"

    U.S. Energy Information Administration (EIA) Indexed Site

    2 Televisions in U.S. Homes, by Owner/Renter Status, 2009" " Million Housing Units, Final" ,,,,"Housing Unit Type" ,,,,"Single-Family Units",,,,"Apartments in Buildings With" ,,,,"Detached",,"Attached",,"2 to 4 Units",,"5 or More Units",,"Mobile Homes" ,"Total U.S.1 (millions)"

  20. " Million Housing Units, Final"

    U.S. Energy Information Administration (EIA) Indexed Site

    2 Space Heating in U.S. Homes, by Owner/Renter Status, 2009" " Million Housing Units, Final" ,,,,"Housing Unit Type" ,,,,"Single-Family Units",,,,"Apartments in Buildings With" ,,,,"Detached",,"Attached",,"2 to 4 Units",,"5 or More Units",,"Mobile Homes" ,"Total U.S.1 (millions)"

  1. " Million Housing Units, Final"

    U.S. Energy Information Administration (EIA) Indexed Site

    2 Water Heating in U.S. Homes, by Owner/Renter Status, 2009" " Million Housing Units, Final" ,,,,"Housing Unit Type" ,,,,"Single-Family Units",,,,"Apartments in Buildings With" ,"Total U.S.1 (millions)",,,"Detached",,"Attached",,"2 to 4 Units",,"5 or More Units",,"Mobile Homes"

  2. " Million Housing Units, Final"

    U.S. Energy Information Administration (EIA) Indexed Site

    2 Household Demographics of U.S. Homes, by Owner/Renter Status, 2009" " Million Housing Units, Final" ,,,,"Housing Unit Type" ,,,,"Single-Family Units",,,,"Apartments in Buildings With" ,"Total U.S.1 (millions)",,,"Detached",,"Attached",,"2 to 4 Units",,"5 or More Units",,"Mobile Homes" "Household

  3. " Million Housing Units, Final"

    U.S. Energy Information Administration (EIA) Indexed Site

    2 Computers and Other Electronics in U.S. Homes, by Owner/Renter Status, 2009" " Million Housing Units, Final" ,,,,"Housing Unit Type" ,,,,"Single-Family Units",,,,"Apartments in Buildings With" ,,,,"Detached",,"Attached",,"2 to 4 Units",,"5 or More Units",,"Mobile Homes" ,"Total U.S.1 (millions)"

  4. " Million Housing Units, Final"

    U.S. Energy Information Administration (EIA) Indexed Site

    2 Air Conditioning in U.S. Homes, by Owner/Renter Status, 2009" " Million Housing Units, Final" ,,,,"Housing Unit Type" ,,,,"Single-Family Units",,,,"Apartments in Buildings With" ,,,,"Detached",,"Attached",,"2 to 4 Units",,"5 or More Units",,"Mobile Homes" ,"Total U.S.1 (millions)" "Air

  5. Stimulation Emission Depletion (STED) microscopy | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Stimulation Emission Depletion (STED) microscopy What is STED? Stimulation Emission Depletion (STED) microscopy is a super resolution microscopy tool that captures super resolution images on a nanometer scale. A donut-shaped red light switches off surrounding molecules, allowing only those in the center to fluoresce. At the nanoscale, light microscopes cannot tell features apart. Because light moves as waves and the particles of light are so close together, the lens used cannot focus all of the

  6. Photovoltaic-thermal collectors

    DOE Patents [OSTI]

    Cox, III, Charles H. (Carlisle, MA)

    1984-04-24

    A photovoltaic-thermal solar cell including a semiconductor body having antireflective top and bottom surfaces and coated on each said surface with a patterned electrode covering less than 10% of the surface area. A thermal-absorbing surface is spaced apart from the bottom surface of the semiconductor and a heat-exchange fluid is passed between the bottom surface and the heat-absorbing surface.

  7. Automated Sealing of Home Enclosures with Aerosol Particles | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Sealing of Home Enclosures with Aerosol Particles Automated Sealing of Home Enclosures with Aerosol Particles This presentation was delivered during a Building America webinar on October 14, 2011, by the Building Industry Research Alliance team member Mark Modera. PDF icon bira_webinar_10_14_11.pdf More Documents & Publications Building America Technology Solutions for New and Existing Homes: Apartment Compartmentalization with an Aerosol-Based Sealing Process Building America

  8. Refeeding biogas digester solids

    SciTech Connect (OSTI)

    Licht, L.A.

    1981-01-01

    Biosolid, the digester residue from a biogas plant, must be of economical use to ensure the financial feasibility of biogas facilities. This paper sumarizes work performed for a Department of Energy study in the Imperial Valley of California. Feeding trials show that biosolid can only be used as a small proportion of feed rations. Apart from bacterial debris, biosolid is composed larely of non-nutritive residues. 5 refs.

  9. ARM - Facility News Article

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Infrared Thermometers Complete Cloud Pictures Bookmark and Share Extended Facilities at the SGP are spaced far enough apart that they do not have overlapping views overhead. This separation allows the infrared thermometers to obtain specific measurements for individual cloud cases. To help ARM scientists analyze cloud temperatures and infer cloud heights over the ARM Climate Research Facility Southern Great Plains (SGP) site, operations staff are installing six new infrared thermometers (IRTs)

  10. Scramjet combustor

    SciTech Connect (OSTI)

    Harshman, D.L.

    1991-12-17

    This patent describes a scramjet combustor having a longitudinal axis and two spaced-apart, generally opposing, and generally longitudinally extending walls, with at least one of the walls having an aft-facing step. The combustor also having a fuel injector disposed proximate the step at an acute positive angle with respect to the longitudinal axis, and wherein the improvement comprises means for varying the fuel injector angle during supersonic flight.

  11. Fuel cell system with interconnect

    SciTech Connect (OSTI)

    Goettler, Richard; Liu, Zhien

    2015-08-11

    The present invention includes a fuel cell system having a plurality of adjacent electrochemical cells formed of an anode layer, a cathode layer spaced apart from the anode layer, and an electrolyte layer disposed between the anode layer and the cathode layer. The fuel cell system also includes at least one interconnect, the interconnect being structured to conduct free electrons between adjacent electrochemical cells. Each interconnect includes a primary conductor embedded within the electrolyte layer and structured to conduct the free electrons.

  12. Fuel cell system with interconnect

    SciTech Connect (OSTI)

    Goettler, Richard; Liu, Zhien

    2015-03-10

    The present invention includes a fuel cell system having a plurality of adjacent electrochemical cells formed of an anode layer, a cathode layer spaced apart from the anode layer, and an electrolyte layer disposed between the anode layer and the cathode layer. The fuel cell system also includes at least one interconnect, the interconnect being structured to conduct free electrons between adjacent electrochemical cells. Each interconnect includes a primary conductor embedded within the electrolyte layer and structured to conduct the free electrons.

  13. Fuel cell system with interconnect

    SciTech Connect (OSTI)

    Liu, Zhien; Goettler, Richard

    2015-09-29

    The present invention includes a fuel cell system having a plurality of adjacent electrochemical cells formed of an anode layer, a cathode layer spaced apart from the anode layer, and an electrolyte layer disposed between the anode layer and the cathode layer. The fuel cell system also includes at least one interconnect, the interconnect being structured to conduct free electrons between adjacent electrochemical cells. Each interconnect includes a primary conductor embedded within the electrolyte layer and structured to conduct the free electrons.

  14. New York Power Authority/New York City Housing Authority refrigerator replacement program, first program year evaluation. Final report

    SciTech Connect (OSTI)

    Kinney, L.F.; Lewis, G.; Pratt, R.G.; Miller, J.

    1997-08-01

    Acting as an energy services provider, the New York Power Authority (NYPA) has initiated a long-term project through which 20,000 refrigerators per year will be replaced with the most energy-efficient units possible in apartments managed by the New York City Housing Authority (NYCHA). Using bulk purchasing as an incentive to appliance manufacturers to produce energy-efficient refrigerators suitable for use in apartments, replaced in the first year of the program, which ended in December 1996. These units, kWh per year. Savings were determined by field testing and laboratory testing of 220 existing refrigerators and 56 newly-installed units. In the next program year, a 15.0-cubic-foot Maytag refrigerator, newly-designed in response to bulk purchasing incentives, is being installed. The new unit has a label rating of 437 kWh per year, 31 percent better than 1993 energy standards. Old refrigerators removed from apartments are {open_quotes}demanufactured{close_quotes} in an environmentally-appropriate way and both metals and refrigerants are recovered for reuse.

  15. Multifamily Individual Heating and Ventilation Systems, Lawrence, Massachusetts (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2013-11-01

    The conversion of an older Massachusetts building into condominiums illustrates a safe, durable, and cost-effective solution for heating and ventilation systems that can potentially benefit millions of multifamily buildings. Merrimack Valley Habitat for Humanity (MVHfH) partnered with U.S. Department of Energy Building America team Building Science Corporation (BSC) to provide high performance affordable housing for 10 families in the retrofit of an existing mass masonry building (a former convent). The original ventilation design for the project was provided by a local engineer and consisted of a single large heat recovery ventilator (HRV) located in a mechanical room in the basement with a centralized duct system providing supply air to the main living space and exhausting stale air from the single bathroom in each apartment. This design was deemed to be far too costly to install and operate for several reasons: the large central HRV was oversized and the specified flows to each apartment were much higher than the ASHRAE 62.2 rate; an extensive system of ductwork, smoke and fire dampers, and duct chases were specified; ductwork required a significant area of dropped ceilings; and the system lacked individual ventilation control in the apartments

  16. Heat-pump-centered Integrated Community Energy Systems: systems development, Consolidated Natural Gas Service Company. Final report

    SciTech Connect (OSTI)

    Baker, N.R.; Donakowski, T.D.; Foster, R.B.; Sala, D.L.; Tison, R.R.; Whaley, T.P.; Yudow, B.D.; Swenson, P.F.

    1980-01-01

    The Heat-Actuated Heat Pump Centered Integrated Community Energy System (HAHP-ICES) utilizes a gas-fired, engine-driven, heat pump and commercial buildings, and offers several advantages over the more conventional equipment it is intended to supplant. The general non-site-specific application assumes a hypothetical community of one 59,000 ft/sup 2/ office building and five 24-unit, low-rise apartment buildings located in a region with a climate similar to Chicago. This community serves as a starting point - the base case - upon which various sensitivity analyses are performed and through which the performance characteristics of the HAHP are explored. The results of these analyses provided the selection criteria for the site-specific application of the HAHP-ICES concept to a real-world community. The site-specific community consists of 42 townhouses; five 120-unit, low-rise apartment buildings; five 104-unit high-rise apartment buildings; one 124,000 ft/sup 2/ office building; and a single 135,000 ft/sup 2/ retail building located in Monroeville, Pa. The base-case analyses confirmed that the HAHP-ICES has significant potentials for reducing the primary energy consumption and pollutant emissions associated with space conditioning when compared with a conventional system. Primary energy consumption was reduced by 30%, while emission reductions ranged from 39 to 77%. The results of the site-specific analysis indicate that reductions in energy consumption of between 15 and 22% are possible when a HAHP-ICES is selected as opposed to conventional HVAC equipment.

  17. Flexible nanogenerators

    SciTech Connect (OSTI)

    Wang, Zhong L.; Wang, Xudong; Qin, Yong; Yang, Rusen

    2011-07-19

    A small scale electrical generator includes an elongated substrate and a first piezoelectric fine wire. The first piezoelectric fine wire is disposed along a surface of the substrate. The first piezoelectric fine wire has a first end and a spaced-apart second end. A first conductive contact secures the first end of the fine wire to a first portion of the substrate and a second conductive contact secures the second end of the fine wire to a second portion of the substrate. A fabric made of interwoven strands that includes fibers from which piezoelectric nanowires extend radially therefrom and conductive nanostructures extend therefrom is configured to generate electricity.

  18. Large-scale fabrication of vertically aligned ZnO nanowire arrays

    SciTech Connect (OSTI)

    Wang, Zhong Lin; Hu, Youfan; Zhang, Yan; Xu, Chen; Zhu, Guang

    2014-09-09

    A generator includes a substrate, a first electrode layer, a dense plurality of vertically-aligned piezoelectric elongated nanostructures, an insulating layer and a second electrode layer. The substrate has a top surface and the first electrode layer is disposed on the top surface of the substrate. The dense plurality of vertically-aligned piezoelectric elongated nanostructures extends from the first electrode layer. Each of the nanostructures has a top end. The insulating layer is disposed on the top ends of the nanostructures. The second electrode layer is disposed on the non-conductive layer and is spaced apart from the nanostructures.

  19. Buildings Energy Data Book: 9.4 High Performance Buildings

    Buildings Energy Data Book [EERE]

    6 Case Study, The Solaire, New York, New York (Apartments/Multi-Family) Building Design Floor Area: 357,000 SF Units: 293 Maximum Occupancy: 700 Floors: 27 Site Size: 0.38 Acres Typical Occupancy(1): 578 Black-Water Treatment Facility (2) Shell Windows Material: Double Glazed, Low-e, Thermal Breaks with Insulated Spacers Operable Windows Fixed Windows Visual Transminttance 0.68 0.68 Solar Heat Gain Coefficient 0.35 0.35 U-Factor 0.47 0.41 Wall/Roof Material R-Value Exterior Walls: Insulated

  20. In-line rotating torque sensor with on-board amplifier

    DOE Patents [OSTI]

    Kronberg, James W.

    1990-01-01

    A rotating torque sensor apparatus and method for measuring small torques comprising a shaft, a platform having a circuit board and a first moment arm attached to the shaft, a rotatable wheel coaxial with the shaft and having a second moment arm spaced apart from the first moment arm with a load cell therebetween for generating an electric signal as the torque is applied to the shaft and transferred through the moment arms to the load cell. The electrical signal is conducted from the load cell to the circuit board for filtering and amplification before being extracted from the torque assembly through a slip ring.

  1. Table HC1-5a. Housing Unit Characteristics by Type of Owner-Occupied Housing Unit,

    U.S. Energy Information Administration (EIA) Indexed Site

    5a. Housing Unit Characteristics by Type of Owner-Occupied Housing Unit, Million U.S. Households, 2001 Housing Unit Characteristics RSE Column Factor: Total Owner- Occupied Units Type of Owner-Occupied Housing Unit RSE Row Factors Single-Family Apartments in Buildings With Mobile Homes Two to Four Units Five or More Units 0.4 0.4 1.8 2.1 1.4 Total ............................................... 72.7 63.2 2.1 1.8 5.7 6.7 Census Region and Division Northeast ......................................

  2. Table HC7-5a. Home Office Equipment by Type of Owner-Occupied Housing Unit,

    U.S. Energy Information Administration (EIA) Indexed Site

    5a. Home Office Equipment by Type of Owner-Occupied Housing Unit, Million U.S. Households, 2001 Home Office Equipment RSE Column Factor: Total Owner- Occupied Units Type of Owner-Occupied Housing Unit RSE Row Factors Single-Family Apartments in Buildings With Mobile Home Two to Four Units Five or More Units 0.3 0.3 2.1 3.0 1.6 Total ............................................... 72.7 63.2 2.1 1.8 5.7 6.7 Households Using Office Equipment .......................... 67.5 59.0 2.0 1.7 4.8 7.0

  3. Table HC7-6a. Home Office Equipment by Type of Rented Housing Unit,

    U.S. Energy Information Administration (EIA) Indexed Site

    6a. Home Office Equipment by Type of Rented Housing Unit, Million U.S. Households, 2001 Home Office Equipment RSE Column Factor: Total Rented Units Type of Rented Housing Unit RSE Row Factors Single-Family Apartments in Buildings With Mobile Home Two to Four Units Five or More Units 0.5 0.8 1.0 0.9 3.0 Total ............................................... 34.3 10.5 7.4 15.2 1.1 6.9 Households Using Office Equipment .......................... 28.7 9.2 6.5 12.1 0.9 7.5 Personal Computers 1

  4. JLab mourns loss of colleague, visiting scientist Razmik Asaturyan |

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Jefferson Lab (right) and JLab user Glen Warren (University of Basel, Switzerland) prepare to move the Hall C neutron detectors for the Gen experiment after completing assembly and testing. In Memoriam Razmik Asaturyan, 1954 - 2006 CEBAF-Yerevan Collaboration Hall C Visiting Scientist He was only 52 years old. On the evening of 15 June 2006, about 22:30 (10:30 p.m.). I found Razmik on the apartment floor. I called 911 for help. But no one could bring Razmik back. The doctor told us that

  5. Glove box shield

    DOE Patents [OSTI]

    Brackenbush, L.W.; Hoenes, G.R.

    A shield for a glove box housing radioactive material is comprised of spaced apart clamping members which maintain three overlapping flaps in place therebetween. There is a central flap and two side flaps, the side flaps overlapping at the interior edges thereof and the central flap extending past the intersection of the side flaps in order to insure that the shield is always closed when the user wthdraws his hand from the glove box. Lead loaded neoprene rubber is the preferred material for the three flaps, the extent of lead loading depending upon the radiation levels within the glove box.

  6. Glove box shield

    DOE Patents [OSTI]

    Brackenbush, Larry W.; Hoenes, Glenn R.

    1981-01-01

    According to the present invention, a shield for a glove box housing radioactive material is comprised of spaced apart clamping members which maintain three overlapping flaps in place therebetween. There is a central flap and two side flaps, the side flaps overlapping at the interior edges thereof and the central flap extending past the intersection of the side flaps in order to insure that the shield is always closed when the user withdraws his hand from the glove box. Lead loaded neoprene rubber is the preferred material for the three flaps, the extent of lead loading depending upon the radiation levels within the glove box.

  7. Coal storage hopper with vibrating-screen agitator

    DOE Patents [OSTI]

    Daw, C.S.; Lackey, M.E.; Sy, R.L.

    1982-04-27

    The present invention is directed to a vibrating screen agitator in a coal storage hopper for assuring the uniform feed of coal having sufficient moisture content to effect agglomeration and bridging thereof in the coal hopper from the latter onto a conveyer mechanism. The vibrating scrren agitator is provided by a plurality of transversely oriented and vertically spaced apart screens in the storage hopper with a plurality of vertically oriented rods attached to the screens. The rods are vibrated to effect the vibration of the screens and the breaking up of agglomerates in the coal which might impede the uniform flow of the coal from the hopper onto a conveyer.

  8. Coal storage hopper with vibrating screen agitator

    DOE Patents [OSTI]

    Daw, Charles S.; Lackey, Mack E.; Sy, Ronald L.

    1984-01-01

    The present invention is directed to a vibrating screen agitator in a coal storage hopper for assuring the uniform feed of coal having sufficient moisture content to effect agglomeration and bridging thereof in the coal hopper from the latter onto a conveyor mechanism. The vibrating screen agitator is provided by a plurality of transversely oriented and vertically spaced apart screens in the storage hopper with a plurality of vertically oriented rods attached to the screens. The rods are vibrated to effect the vibration of the screens and the breaking up of agglomerates in the coal which might impede the uniform flow of the coal from the hopper onto a conveyer.

  9. Photovoltaic module mounting clip with integral grounding

    DOE Patents [OSTI]

    Lenox, Carl J.

    2008-10-14

    An electrically conductive mounting/grounding clip, for use with a photovoltaic assembly of the type having an electrically conductive frame, comprises an electrically conductive body. The body has a central portion and first and second spaced-apart arms extending generally perpendicular to the central portion. Each arm has an outer portion with each outer portion having an outer end. At least one frame surface-disrupting element is at each outer end. The central portion defines a plane with the frame surface-disrupting elements pointing towards the plane. In some examples each arm extends from the central portion at an acute angle to the plane.

  10. Exhibit Set Up | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Publications, Exhibits, & Logos » Exhibit Set Up Exhibit Set Up Follow these step-by step instructions in order to set up your exhibit. 1. The exhibit case. Photo of a man opening an exhibit case. 2. Inside the top of the case, you will find shipping labels, extra bulbs, and contact information. Photo of an open exhibit case. 3. Expand the display frame by pulling the center piece apart gently. Red feet should be at bottom front. Photo of a man unfolding an exhibit display frame. 4. Fully

  11. HUD CHP GUIDE #1 - Questions and Answers ON CHP FOR MULTIFAMILIY HOUSING,

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    September 2005 | Department of Energy 1 - Questions and Answers ON CHP FOR MULTIFAMILIY HOUSING, September 2005 HUD CHP GUIDE #1 - Questions and Answers ON CHP FOR MULTIFAMILIY HOUSING, September 2005 Questions and Answers (Q&A) on CHP for Apartment Buildings are adapted from the "Cogeneration Manual: A practical guide for evaluating and selecting equipment to be used in multi-family housing," issued by New York City in June 1989. The manual was developed to assist managers,

  12. Autothermal hydrogen storage and delivery systems

    DOE Patents [OSTI]

    Pez, Guido Peter; Cooper, Alan Charles; Scott, Aaron Raymond

    2011-08-23

    Processes are provided for the storage and release of hydrogen by means of dehydrogenation of hydrogen carrier compositions where at least part of the heat of dehydrogenation is provided by a hydrogen-reversible selective oxidation of the carrier. Autothermal generation of hydrogen is achieved wherein sufficient heat is provided to sustain the at least partial endothermic dehydrogenation of the carrier at reaction temperature. The at least partially dehydrogenated and at least partially selectively oxidized liquid carrier is regenerated in a catalytic hydrogenation process where apart from an incidental employment of process heat, gaseous hydrogen is the primary source of reversibly contained hydrogen and the necessary reaction energy.

  13. The C3E Women in Clean Energy Symposium

    SciTech Connect (OSTI)

    Saylors-Laster, Kim; Kirsch, Emily; Brown, Sandra; Jordan, Rhonda; Mukherjee, Anuradha; Martin, Cheryl; Madden, Alice; Araujo, Kathy

    2013-09-30

    The Clean Energy Education & Empowerment initiative (C3E), provides a forum for thought leaders across the clean energy sector to devise innovative solutions to the nation's most pressing energy challenges. This year, the symposium was held at MIT's Media Lab in Cambridge, MA, on September 19-20, 2013. What sets the annual conference apart is its focus on building a strong community of professionals dedicated to advancing more women leaders in clean energy fields. By working to leverage the skills, talents and perspectives of women, the symposium helps to better position the U.S. to lead the global clean energy revolution.

  14. Sighting optics including an optical element having a first focal length and a second focal length and methods for sighting

    DOE Patents [OSTI]

    Crandall, David Lynn

    2011-08-16

    Sighting optics include a front sight and a rear sight positioned in a spaced-apart relation. The rear sight includes an optical element having a first focal length and a second focal length. The first focal length is selected so that it is about equal to a distance separating the optical element and the front sight and the second focal length is selected so that it is about equal to a target distance. The optical element thus brings into simultaneous focus for a user images of the front sight and the target.

  15. Sighting optics including an optical element having a first focal length and a second focal length

    DOE Patents [OSTI]

    Crandall, David Lynn

    2011-08-01

    One embodiment of sighting optics according to the teachings provided herein may include a front sight and a rear sight positioned in spaced-apart relation. The rear sight includes an optical element having a first focal length and a second focal length. The first focal length is selected so that it is about equal to a distance separating the optical element and the front sight and the second focal length is selected so that it is about equal to a target distance. The optical element thus brings into simultaneous focus, for a user, images of the front sight and the target.

  16. New self-assembly luminescent molecular triangle and square rhenium(I) complexes

    SciTech Connect (OSTI)

    Sun, S.S.; Lees, A.J.

    1999-09-20

    The design and study of well-arranged metal-containing macrocycles is one of the major current research areas in modern supramolecular chemistry. Apart from their particular structural features, supramolecular species formed by self-assembly of transition metals introduce many special functional properties such as luminescence, redox activity, and magnetism into the structure. More recently, transition metal based molecular squares have been synthesized by utilizing self-assembly of preorganized metal centers and pyridine-based bridging ligands. The 90{degree} bonding angles between ligands in transition metal complexes provide an attractive feature for constructing macrocyclic structures.

  17. " Million Housing Units, Final"

    U.S. Energy Information Administration (EIA) Indexed Site

    Air Conditioning in U.S. Homes, by Housing Unit Type, 2009" " Million Housing Units, Final" ,,"Housing Unit Type" ,,"Single-Family Units",,"Apartments in Buildings With" ,"Total U.S.1 (millions)" ,," Detached"," Attached"," 2 to 4 Units","5 or More Units","Mobile Homes" "Air Conditioning" "Total Homes",113.6,71.8,6.7,9,19.1,6.9 "Air Conditioning Equipment"

  18. Method and system for monitoring environmental conditions

    DOE Patents [OSTI]

    Kulesz, James J. [Oak Ridge, TN; Lee, Ronald W. [Oak Ridge, TN

    2010-11-16

    A system for detecting the occurrence of anomalies includes a plurality of spaced apart nodes, with each node having adjacent nodes, each of the nodes having one or more sensors associated with the node and capable of detecting anomalies, and each of the nodes having a controller connected to the sensors associated with the node. The system also includes communication links between adjacent nodes, whereby the nodes form a network. At least one software agent is capable of changing the operation of at least one of the controllers in response to the detection of an anomaly by a sensor.

  19. Simplified multizone blower door techniques for multifamily buildings. Final report

    SciTech Connect (OSTI)

    1995-09-01

    This research focused on the applicability of (a) two-blower-door and (b) single-blower-door multi-zone pressurization techniques for estimating the air leakage characteristics of New York State multi-family apartment buildings. The research also investigated the magnitude of external leakage area in multi-family buildings and used computer simulations to estimate the effect of decreasing external and internal leakage areas on air infiltration rates. This research investigates whether two blower doors can be used to determine the ELA of the exterior envelope and the ELA of partitions. Two multi-zone versions of the single-blower-door pressurization method are also examined.

  20. Solid-waste contracting: Questions and answers

    SciTech Connect (OSTI)

    Not Available

    1992-05-01

    The increasing complexity of local government responsibilities is nowhere better illustrated than in solid waste management. In the past, when the adverse effects of waste disposal were less recognized, garbage was simply taken to local public dumps, or burned in backyard barrels or apartment building incinerators. Local governments must modernize their solid waste programs and operate within growing federal and state regulations. The changing regulatory environment of solid waste management presents a golden opportunity to contract with the private sector if interest of the community can be protected.

  1. Self advancing mine roof supports

    SciTech Connect (OSTI)

    Seddon, J.; Jones, F.

    1985-03-19

    A self-advancing mine-roof-support for use in or aligned with a main roadway or gate has a floor-engaging part and a roof engaging part spaced apart by extensible load-bearing prop or jack means, and engagement means for a face-conveyor and a transversely acting transfer conveyor whereby their relative positions are constrained to facilitate discharge of mineral from one conveyor to the other. The engagement means for the face conveyor comprises sliding anchor beams that assure maintenance of the relative attitudes of the support and the face conveyor and the transfer conveyor is held fore and aft of the support.

  2. Multifamily Envelope Leakage Model

    SciTech Connect (OSTI)

    Faakye, O.; Griffiths, D.

    2015-05-01

    The objective of the 2013 research project was to develop the model for predicting fully guarded test results (FGT), using unguarded test data and specific building features of apartment units. The model developed has a coefficient of determination R2 value of 0.53 with a root mean square error (RMSE) of 0.13. Both statistical metrics indicate that the model is relatively strong. When tested against data that was not included in the development of the model, prediction accuracy was within 19%, which is reasonable given that seasonal differences in blower door measurements can vary by as much as 25%.

  3. New Jersey Landlord, Tenants See Benefits of Retrofits | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Jersey Landlord, Tenants See Benefits of Retrofits New Jersey Landlord, Tenants See Benefits of Retrofits April 9, 2010 - 2:32pm Addthis Joshua DeLung Some might think that only single-family homes are being weatherized across America, but eligible renters in Newark, N.J., are taking advantage of the increases in savings, safety and comfort that come with weatherization. Sunny Uberio is the owner of Realty Management Systems LLC in Newark, N.J., where he had his three apartment

  4. Apparatus and method for detection and characterization of particles using light scattered therefrom

    DOE Patents [OSTI]

    Johnston, R.G.

    1987-03-23

    Apparatus and method for detection and characterization of particles using light scattered therefrom. Differential phase measurements on scattered light from particles are possible using the two-frequency Zeeman effect laser which emits two frequencies of radiation 250 kHz apart. Excellent discrimination and reproducibility for various pure pollen and bacterial samples in suspension have been observed with a single polarization element. Additionally, a 250 kHz beat frequency was recorded from an individual particle traversing the focused output from the laser in a flow cytometer. 13 figs.

  5. A study on nondestructive evaluation technique by the use of interface guided waves on shrink fit structure

    SciTech Connect (OSTI)

    Lee, Jaesun; Cho, Younho; Park, Jun-Pil; Rose, Joseph L.; Huh, Hyung; Park, Keun-Bae; Kim, Dong-Ok

    2014-02-18

    Guided wave was widely studied for plate and pipe due to the great application area. Guided wave has advantage on long distance inspection for an inaccessible area and apart from transducer. Quite often shrink fit structures were found in nuclear power facilities. In this paper, two pipes were designed with perfect shrink fit condition for Stainless Steel 316. The displacement distribution was calculated with boundary condition. The interface wave propagation pattern was analyzed by the numerical modeling. The experimental results show a possibility of weld delamination and defect detection.

  6. Method of fabricating a back-contact solar cell and device thereof

    DOE Patents [OSTI]

    Li, Bo; Smith, David; Cousins, Peter

    2014-07-29

    Methods of fabricating back-contact solar cells and devices thereof are described. A method of fabricating a back-contact solar cell includes forming an N-type dopant source layer and a P-type dopant source layer above a material layer disposed above a substrate. The N-type dopant source layer is spaced apart from the P-type dopant source layer. The N-type dopant source layer and the P-type dopant source layer are heated. Subsequently, a trench is formed in the material layer, between the N-type and P-type dopant source layers.

  7. Process for vaporizing a liquid hydrocarbon fuel

    DOE Patents [OSTI]

    Szydlowski, Donald F. (East Hartford, CT); Kuzminskas, Vaidotas (Glastonbury, CT); Bittner, Joseph E. (East Hartford, CT)

    1981-01-01

    The object of the invention is to provide a process for vaporizing liquid hydrocarbon fuels efficiently and without the formation of carbon residue on the apparatus used. The process includes simultaneously passing the liquid fuel and an inert hot gas downwardly through a plurality of vertically spaed apart regions of high surface area packing material. The liquid thinly coats the packing surface, and the sensible heat of the hot gas vaporizes this coating of liquid. Unvaporized liquid passing through one region of packing is uniformly redistributed over the top surface of the next region until all fuel has been vaporized using only the sensible heat of the hot gas stream.

  8. High flux reactor

    DOE Patents [OSTI]

    Lake, James A.; Heath, Russell L.; Liebenthal, John L.; DeBoisblanc, Deslonde R.; Leyse, Carl F.; Parsons, Kent; Ryskamp, John M.; Wadkins, Robert P.; Harker, Yale D.; Fillmore, Gary N.; Oh, Chang H.

    1988-01-01

    A high flux reactor is comprised of a core which is divided into two symetric segments housed in a pressure vessel. The core segments include at least one radial fuel plate. The spacing between the plates functions as a coolant flow channel. The core segments are spaced axially apart such that a coolant mixing plenum is formed between them. A channel is provided such that a portion of the coolant bypasses the first core section and goes directly into the mixing plenum. The outlet coolant from the first core segment is mixed with the bypass coolant resulting in a lower inlet temperature to the lower core segment.

  9. Compact ion source neutron generator

    DOE Patents [OSTI]

    Schenkel, Thomas; Persaud, Arun; Kapadia, Rehan; Javey, Ali; Chang-Hasnain, Constance; Rangelow, Ivo; Kwan, Joe

    2015-10-13

    A neutron generator includes a conductive substrate comprising a plurality of conductive nanostructures with free-standing tips and a source of an atomic species to introduce the atomic species in proximity to the free-standing tips. A target placed apart from the substrate is voltage biased relative to the substrate to ionize and accelerate the ionized atomic species toward the target. The target includes an element capable of a nuclear fusion reaction with the ionized atomic species to produce a one or more neutrons as a reaction by-product.

  10. Capacitive microelectromechanical switches with dynamic soft-landing

    DOE Patents [OSTI]

    Jain, Ankit; Alam, Muhammad Ashraful; Nair, Pradeep R.

    2015-10-13

    A microelectromechanical system (MEMS)-based electrical switch. The electrical switch includes a moveable electrode, a dielectric layer positioned adjacent the moveable electrode on a first side of the dielectric layer and spaced apart from the moveable electrode when the moveable electrode is in an inactivated position and in contact with the moveable electrode when the moveable electrode is in an activated position, and a substrate attached to the dielectric layer on a second side opposite to the first side, the moveable electrode is configured to brake prior to coming in contact with the dielectric layer when the moveable electrode is switched between the inactivated state and the activated state.

  11. upd0297.PDF

    Gasoline and Diesel Fuel Update (EIA)

    4a. Home Office Equipment by Type of Housing Unit, Million U.S. Households, 2001 Home Office Equipment RSE Column Factor: Total Type of Housing Unit RSE Row Factors Single-Family Apartments in Buildings With Mobile Home Two to Four Units Five or More Units 0.4 0.5 1.7 1.5 2.2 Total ............................................... 107.0 73.7 9.5 17.0 6.8 4.1 Households Using Office Equipment .......................... 96.2 68.2 8.5 13.8 5.8 4.5 Personal Computers 1 ................... 60.0 46.4

  12. Apparatus for preventing particle deposition from process streams on optical access windows

    DOE Patents [OSTI]

    Logan, Ronald G.; Grimm, Ulrich

    1993-01-01

    An electrostatic precipitator is disposed inside and around the periphery of the window of a viewing port communicating with a housing through which a particle-laden gas stream is being passed. The precipitator includes a pair of electrodes around the periphery of the window, spaced apart and connected to a unidirectional voltage source. Application of high voltage from the source to the electrodes causes air molecules in the gas stream to become ionized, attaching to solid particles and causing them to be deposited on a collector electrode. This prevents the particles from being deposited on the window and keeps the window clean for viewing and making optical measurements.

  13. Methods and systems to facilitate reducing NO.sub.x emissions in combustion systems

    DOE Patents [OSTI]

    Lacy, Benjamin Paul; Kraemer, Gilbert Otto; Varatharajan, Balachandar; Yilmaz, Ertan; Lipinski, John Joseph; Ziminsky, Willy Steve

    2011-02-15

    A method for assembling a gas turbine combustor system is provided. The method includes providing a combustion liner including a center axis, an outer wall, a first end, and a second end. The outer wall is orientated substantially parallel to the center axis. The method also includes coupling a transition piece to the liner second end. The transition piece includes an outer wall. The method further includes coupling a plurality of lean-direct injectors along at least one of the liner outer wall and the transition piece outer wall such that the injectors are spaced axially apart along the wall.

  14. Faces of Science: José Olivares

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    José Olivares Faces of Science: José Olivares José Olivares has always enjoyed figuring out how things work. At an early age, he tore an old television apart, made paper airplanes, and read Scientific American. Today, he leads the Bioscience Division and works on programs developing algae as a source of biofuel for energy and transportation. March 4, 2015 José Olivares José Olivares, Biofuels Contact Communications Office (505) 667-6700 BIOFUELS How things work drives José to discovery

  15. Unidirectional anisotropy in the spin pumping voltage in yttrium iron garnet/platinum bilayers

    SciTech Connect (OSTI)

    Vilela-Leao, L. H.; Salvador, C.; Azevedo, A.; Rezende, S. M.

    2011-09-05

    Detailed measurements of the dc voltage generated in a thin Pt layer deposited on films of yttrium iron garnet (YIG) have been carried out to study the spin pumping effect produced by magnetostatic (MS) modes excited by a microwave field. In relatively thick YIG films the modes are far apart so that one can identify clearly the spin pumping voltage in V{sub SP} produced by each MS mode. We have discovered that when the sputter deposition of the thin Pt layer is made on the YIG film magnetized by a static magnetic field, V{sub SP} exhibits a strong unidirectional anisotropy.

  16. Inductive entanglement classification of four qubits under stochastic local operations and classical communication

    SciTech Connect (OSTI)

    Lamata, L.; Leon, J.; Salgado, D.; Solano, E.

    2007-02-15

    Using an inductive approach to classify multipartite entangled states under stochastic local operations and classical communication introduced recently by the authors [Phys. Rev. A 74, 052336 (2006)], we give the complete classification of four-qubit entangled pure states. Apart from the expected degenerate classes, we show that there exist eight inequivalent ways to entangle four qubits. In this respect, permutation symmetry is taken into account and states with a structure differing only by parameters inside a continuous set are considered to belong to the same class.

  17. CNS partners with The University of Tennessee on new graduate-level

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Nuclear Security Administration CNS helps provide housing to homeless veterans in Tennessee Wednesday, January 28, 2015 - 4:19pm Consolidated Nuclear Security's donation of $25,000 to the Helen Ross McNabb Center's Veterans Housing Project served as one of the final building blocks in the $1.83-million effort to provide permanent housing to homeless veterans who have mental illnesses. Late last year, the ribbon was cut on the first apartment building, and the first four homeless veterans

  18. Six pole/eight pole single-phase motor

    DOE Patents [OSTI]

    Kirschbaum, Herbert S. (Asheville, NC)

    1984-01-01

    A single phase alternating current electric motor is provided with a main stator winding having two coil groups which are connected to form eight poles for eight-pole operation and to form six poles for six-pole operation. Each group contains four series connected coil elements with each element spanning approximately one-seventh of the periphery of the machine. The coil groups are spaced 180 mechanical degrees apart such that each end coil of one group overlaps one of the end coils of the other group. An auxiliary stator winding having two coil groups with the same relative angular displacement as the main stator winding coil groups is included.

  19. Direct-current-like Phase Space Manipulation Using Chirped Alternating Current Fields

    SciTech Connect (OSTI)

    P.F. Schmit and N.J. Fisch

    2010-02-01

    Waves in plasmas can accelerate particles that are resonant with the wave. A dc electric field also accelerates particles, but without a resonance discrimination, which makes the acceleration mechanism profoundly different. Whereas wave-particle acceleration mechanisms have been widely discussed in the literature, this work discusses the direct analogy between wave acceleration and dc field acceleration in a particular parameter regime explored in previous works. Apart from the academic interest of this correspondence, there may be practical advantages in using waves to mimic dc electric fields, for example, in driving plasma current with high efficiency.

  20. Single phase four pole/six pole motor

    DOE Patents [OSTI]

    Kirschbaum, Herbert S.

    1984-01-01

    A single phase alternating current electric motor is provided with a main stator winding having two coil groups each including the series connection of three coils. These coil groups can be connected in series for six pole operation and in parallel for four pole operation. The coils are approximately equally spaced around the periphery of the machine but are not of equal numbers of turns. The two coil groups are identically wound and spaced 180 mechanical degrees apart. One coil of each group has more turns and a greater span than the other two coils.

  1. Single phase four pole/six pole motor

    DOE Patents [OSTI]

    Kirschbaum, H.S.

    1984-10-09

    A single phase alternating current electric motor is provided with a main stator winding having two coil groups each including the series connection of three coils. These coil groups can be connected in series for six pole operation and in parallel for four pole operation. The coils are approximately equally spaced around the periphery of the machine but are not of equal numbers of turns. The two coil groups are identically wound and spaced 180 mechanical degrees apart. One coil of each group has more turns and a greater span than the other two coils. 10 figs.

  2. POSITIONING DEVICE

    DOE Patents [OSTI]

    Wall, R.R.; Peterson, D.L.

    1959-09-15

    A positioner is described for a vertical reactor-control rod. The positioner comprises four grooved friction rotatable members that engage the control rod on all sides and shift it longitudinally. The four friction members are drivingly interconnected for conjoint rotation and comprise two pairs of coaxial members. The members of each pair are urged toward one another by hydraulic or pneumatic pressure and thus grip the control rod so as to hold it in any position or adjust it. Release of the by-draulic or pneumatic pressure permits springs between the friction members of each pair to force them apart, whereby the control rod moves quickly by gravity into the reactor.

  3. The C3E Women in Clean Energy Symposium

    ScienceCinema (OSTI)

    Saylors-Laster, Kim; Kirsch, Emily; Brown, Sandra; Jordan, Rhonda; Mukherjee, Anuradha; Martin, Cheryl; Madden, Alice; Araujo, Kathy

    2014-01-10

    The Clean Energy Education & Empowerment initiative (C3E), provides a forum for thought leaders across the clean energy sector to devise innovative solutions to the nation's most pressing energy challenges. This year, the symposium was held at MIT's Media Lab in Cambridge, MA, on September 19-20, 2013. What sets the annual conference apart is its focus on building a strong community of professionals dedicated to advancing more women leaders in clean energy fields. By working to leverage the skills, talents and perspectives of women, the symposium helps to better position the U.S. to lead the global clean energy revolution.

  4. Method for shearing spent nuclear fuel assemblies

    DOE Patents [OSTI]

    Weil, Bradley S.; Watson, Clyde D.

    1977-01-01

    A method is disclosed for shearing spent nuclear fuel assemblies of the type wherein a plurality of long metal tubes packed with ceramic fuel are supported in a spaced apart relationship within an outer metal shell or shroud which provides structural support to the assembly. Spent nuclear fuel assemblies are first compacted in a stepwise manner between specially designed gag-compactors and then sheared into short segments amenable to chemical processing by shear blades contoured to mate with the compacted surface of the fuel assembly.

  5. Flux control and one-hundred and eighty degree core systems

    DOE Patents [OSTI]

    Hsu, John S

    2012-11-27

    A two-phase or four-phase electric machine includes a first stator part and a second stator part disposed about ninety electrical degrees apart. Stator pole parts are positioned near the first stator part and the second stator part. An injector injects a third-harmonic frequency current that is separate from and not produced by the fundamental current driving the first stator part and the second stator part. The electric angular speed of the third-harmonic rotating field comprises .theta. ##EQU00001## where p comprises the number of pole pairs, .theta. comprises a mechanical angle and t comprise time in seconds.

  6. Secondary lift for magnetically levitated vehicles

    DOE Patents [OSTI]

    Cooper, Richard K.

    1976-01-01

    A high-speed terrestrial vehicle that is magnetically levitated by means of magnets which are used to induce eddy currents in a continuous electrically conductive nonferromagnetic track to produce magnetic images that repel the inducing magnet to provide primary lift for the vehicle. The magnets are arranged so that adjacent ones have their fields in opposite directions and the magnets are spaced apart a distance that provides a secondary lift between each magnet and the adjacent magnet's image, the secondary lift being maximized by optimal spacing of the magnets.

  7. Inventors Behind General Electric | GE Global Research

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Dragan Filipovic Dragan Filipovic Senior Engineer Manufacturing Chemical & Materials Technologies Click to email this to a friend (Opens in new window) Share on Facebook (Opens in new window) Click to share (Opens in new window) Click to share on LinkedIn (Opens in new window) Click to share on Tumblr (Opens in new window) "Believing that "the sky is the limit" is what sets apart an ordinary researcher from a great one." -Dragan Filipovic Dragan is a believer. He believes

  8. Energy Return on Investment from Recycling Nuclear Fuel

    SciTech Connect (OSTI)

    2011-08-17

    This report presents an evaluation of the Energy Return on Investment (EROI) from recycling an initial batch of 800 t/y of used nuclear fuel (UNF) through a Recycle Center under a number of different fuel cycle scenarios. The study assumed that apart from the original 800 t of UNF only depleted uranium was available as a feed. Therefore for each subsequent scenario only fuel that was derived from the previous fuel cycle scenario was considered. The scenarios represent a good cross section of the options available and the results contained in this paper and associated appendices will allow for other fuel cycle options to be considered.

  9. Acute effect of indoor exposure to paint containing bis(tributyltin) oxide--Wisconsin, 1991

    SciTech Connect (OSTI)

    Not Available

    1991-05-03

    In January 1991, a woman in Wisconsin contacted her local public health department to report that she and her two children had become ill after her landlord painted the walls and ceilings of two rooms of her apartment. Reported symptoms included a burning sensation in the nose and forehead, headache, nose bleed, cough, loss of appetite, nausea, and vomiting. The woman, who was in the third trimester of pregnancy, also complained of a persistent odor from the paint and provided an empty bottle of a paint additive used for mildew control. The label indicated that this product contained 25% bis(tributyltin) oxide (TBTO) as its only active ingredient.

  10. High gas flow alpha detector

    DOE Patents [OSTI]

    Bolton, Richard D.; Bounds, John A.; Rawool-Sullivan, Mohini W.

    1996-01-01

    An alpha detector for application in areas of high velocity gas flows, such as smokestacks and air vents. A plurality of spaced apart signal collectors are placed inside an enclosure, which would include smokestacks and air vents, in sufficient numbers to substantially span said enclosure so that gas ions generated within the gas flow are electrostatically captured by the signal collector means. Electrometer means and a voltage source are connected to the signal collectors to generate an electrical field between adjacent signal collectors, and to indicate a current produced through collection of the gas ions by the signal collectors.

  11. High gas flow alpha detector

    DOE Patents [OSTI]

    Bolton, R.D.; Bounds, J.A.; Rawool-Sullivan, M.W.

    1996-05-07

    An alpha detector for application in areas of high velocity gas flows, such as smokestacks and air vents. A plurality of spaced apart signal collectors are placed inside an enclosure, which would include smokestacks and air vents, in sufficient numbers to substantially span said enclosure so that gas ions generated within the gas flow are electrostatically captured by the signal collector means. Electrometer means and a voltage source are connected to the signal collectors to generate an electrical field between adjacent signal collectors, and to indicate a current produced through collection of the gas ions by the signal collectors. 4 figs.

  12. Interferometric apparatus and method for detection and characterization of particles using light scattered therefrom

    DOE Patents [OSTI]

    Johnston, Roger G.

    1988-01-01

    Interferometric apparatus and method for detection and characterization of particles using light scattered therefrom. Differential phase measurements on scattered light from particles are possible using the two-frequency Zeeman effect laser which emits two frequencies of radiation 250 kHz apart. Excellent discrimination and reproducibility for various pure pollen and bacterial samples in suspension have been observed with a single polarization element. Additionally, a 250 kHz beat frequency was recorded from an individual particle traversing the focused output from the laser in a flow cytometer.

  13. Method of controlling switching of a multiphase inductor-converter bridge

    DOE Patents [OSTI]

    Kustom, Robert L.; Fuja, Raymond E.

    1981-01-01

    In an inductor-convertor circuit for transferring electrical energy between a storage coil and a load coil using a storage thyristor bridge, a load thyristor bridge, and a set of commutating capacitors, operation is improved by a method of changing the rate of delivery of energy in a given direction. The change in rate corresponds to a predetermined change in phase angle between the load bridge and the storage bridge and comprises changing the phase of the bridge by two steps, each equal to half the predetermined change and occurring 180.degree. apart. The method assures commutation and minimizes imbalances that lead otherwise to overvoltages.

  14. Lasting Gifts From Carbon Connections | U.S. DOE Office of Science (SC)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Last W56 Warhead Dismantled Last W56 Warhead Dismantled Amarillo TX NNSA Administrator Amb. Brooks announced that the last W56 nuclear warhead has been dismantled. The 1960s era system has been safely and securely taken apart and will never again be a part of the U.S. nuclear weapons stockpile

    Lasting Gifts From Carbon Connections News News Home Featured Articles 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 Science Headlines Science Highlights Presentations & Testimony News

  15. Transverse-type laser assembly using induced electrical discharge excitation and method

    DOE Patents [OSTI]

    Ault, E.R.

    1994-04-19

    A transverse-type laser assembly is disclosed herein. This assembly defines a laser cavity containing a vapor or gaseous substance which lases when subjected to specific electrical discharge excitation between a pair of spaced-apart electrodes located within the cavity in order to produce a source of light. An arrangement located entirely outside the laser cavity is provided for inducing a voltage across the electrodes within the cavity sufficient to provide the necessary electrical discharge excitation to cause a vapor substance between the electrodes to lase. 3 figures.

  16. Fuel electrode containing pre-sintered nickel/zirconia for a solid oxide fuel cell

    DOE Patents [OSTI]

    Ruka, Roswell J.; Vora, Shailesh D.

    2001-01-01

    A fuel cell structure (2) is provided, having a pre-sintered nickel-zirconia fuel electrode (6) and an air electrode (4), with a ceramic electrolyte (5) disposed between the electrodes, where the pre-sintered fuel electrode (6) contains particles selected from the group consisting of nickel oxide, cobalt and cerium dioxide particles and mixtures thereof, and titanium dioxide particles, within a matrix of yttria-stabilized zirconia and spaced-apart filamentary nickel strings having a chain structure, and where the fuel electrode can be sintered to provide an active solid oxide fuel cell.

  17. Housing characteristics, 1987: Residential Energy Consumption Survey

    SciTech Connect (OSTI)

    Not Available

    1989-05-26

    This report is the first of a series of reports based on data from the 1987 RECS. The 1987 RECS is the seventh in the series of national surveys of households and their energy suppliers. These surveys provide baseline information on how households in the United States use energy. A cross section of housing types such as single-family detached homes, townhouses, large and small apartment buildings, condominiums, and mobile homes were included in the survey. Data from the RECS and a companion survey, the Residential Transportation Energy Consumption Survey (RTECS), are available to the public in published reports such as this one and on public use tapes. 10 figs., 69 tabs.

  18. Thermionic converter

    DOE Patents [OSTI]

    Fitzpatrick, Gary O.

    1987-05-19

    A thermionic converter (10) is set forth which includes an envelope (12) having an electron collector structure (22) attached adjacent to a wall (16). An electron emitter structure (24) is positioned adjacent the collector structure (22) and spaced apart from opposite wall (14). The emitter (24) and collector (22) structures are in a common chamber (20). The emitter structure (24) is heated substantially only by thermal radiation. Very small interelectrode gaps (28) can be maintained utilizing the thermionic converter (10) whereby increased efficiency results.

  19. Indirect passive cooling system for liquid metal cooled nuclear reactors

    DOE Patents [OSTI]

    Hunsbedt, Anstein; Boardman, Charles E.

    1990-01-01

    A liquid metal cooled nuclear reactor having a passive cooling system for removing residual heat resulting from fuel decay during reactor shutdown. The passive cooling system comprises a plurality of partitions surrounding the reactor vessel in spaced apart relation forming intermediate areas for circulating heat transferring fluid which remove and carry away heat from the reactor vessel. The passive cooling system includes a closed primary fluid circuit through the partitions surrounding the reactor vessel and a partially adjoining secondary open fluid circuit for carrying transferred heat out into the atmosphere.

  20. Passive cooling safety system for liquid metal cooled nuclear reactors

    DOE Patents [OSTI]

    Hunsbedt, Anstein; Boardman, Charles E.; Hui, Marvin M.; Berglund, Robert C.

    1991-01-01

    A liquid metal cooled nuclear reactor having a passive cooling system for removing residual heat resulting from fuel decay during reactor shutdown. The passive cooling system comprises a plurality of partitions surrounding the reactor vessel in spaced apart relation forming intermediate areas for circulating heat transferring fluid which remove and carry away heat from the reactor vessel. The passive cooling system includes a closed primary fluid circuit through the partitions surrounding the reactor vessel and a partially adjoining secondary open fluid circuit for carrying transferred heat out into the atmosphere.

  1. Make aromatics from LPG

    SciTech Connect (OSTI)

    Doolan, P.C. ); Pujado, P.R. )

    1989-09-01

    Liquefied petroleum gas (LPG) consists mainly of the propane and butane fraction recovered from gas fields, associated petroleum gas and refinery operations. Apart from its use in steam cracking and stream reforming, LPG has few petrochemical applications. The relative abundance of LPG and the strong demand for aromatics - benzene, toluene and xylenes (BTX) - make it economically attractive to produce aromatics via the aromatization of propane and butanes. This paper describes the Cyclar process, which is based on a catalyst formulation developed by BP and which uses UOP's CCR catalyst regeneration technology, converts propane, butanes or mixtures thereof to petrochemical-quality aromatics in a single step.

  2. Oxygen-producing inert anodes for SOM process

    SciTech Connect (OSTI)

    Pal, Uday B

    2014-02-25

    An electrolysis system for generating a metal and molecular oxygen includes a container for receiving a metal oxide containing a metallic species to be extracted, a cathode positioned to contact a metal oxide housed within the container; an oxygen-ion-conducting membrane positioned to contact a metal oxide housed within the container; an anode in contact with the oxygen-ion-conducting membrane and spaced apart from a metal oxide housed within the container, said anode selected from the group consisting of liquid metal silver, oxygen stable electronic oxides, oxygen stable crucible cermets, and stabilized zirconia composites with oxygen stable electronic oxides.

  3. BEAM CONTROL PROBE

    DOE Patents [OSTI]

    Chesterman, A.W.

    1959-03-17

    A probe is described for intercepting a desired portion of a beam of charged particles and for indicating the spatial disposition of the beam. The disclosed probe assembly includes a pair of pivotally mounted vanes moveable into a single plane with adjacent edges joining and a calibrated mechanical arrangement for pivoting the vancs apart. When the probe is disposed in the path of a charged particle beam, the vanes may be adjusted according to the beam current received in each vane to ascertain the dimension of the beam.

  4. DOE Zero Energy Ready Home Case Study: Transformations, Inc., Production House, Devens, Massachusetts

    SciTech Connect (OSTI)

    none,

    2013-09-01

    A collaboration with Building America team Building Science Corporation helped this builder win a 2013 Housing Innovation Award in 2013—a 2,508-ft2 home built on speculation in the Devens, MA, subdivision. For the above-grade walls, the super-insulated building shell starts with 12 inch thick double walls composed of two 2x4 16-inch on-center walls spaced 5 inches apart. The space between the walls is filled with low-density (open-cell) spray foam for an insulation value of R-45.

  5. DOE ZERH Case Study: Mutual Housing California, Mutual Housing at Spring

    Office of Scientific and Technical Information (OSTI)

    Lake, Woodland, CA () | SciTech Connect : DOE ZERH Case Study: Mutual Housing California, Mutual Housing at Spring Lake, Woodland, CA Citation Details In-Document Search Title: DOE ZERH Case Study: Mutual Housing California, Mutual Housing at Spring Lake, Woodland, CA Case study of a DOE 2015 Housing Innovation Award winning multifamily project of 62 affordable-housing apartment home in the hot-dry climate that exceeded CA Title 24-2008 by 35%, with 2x4 16" on center walls with R-21

  6. How High Up Is That Place? How Far In The Future Is That Event? - D

    Office of Scientific and Technical Information (OSTI)

    D. How far apart were those events? How did Einstein conclude that space and time are related in this way? We can get a better idea by switching things around. We've been looking at how events in different places can either occur at the same time or at different times in different frames of reference. Now, let's take another look at the earlier events of your picking up and putting down your phone, which occurred at different times, but in the same or different places according to the frame of

  7. Solid oxide fuel cell generator

    DOE Patents [OSTI]

    Draper, Robert; George, Raymond A.; Shockling, Larry A.

    1993-01-01

    A solid oxide fuel cell generator has a pair of spaced apart tubesheets in a housing. At least two intermediate barrier walls are between the tubesheets and define a generator chamber between two intermediate buffer chambers. An array of fuel cells have tubes with open ends engaging the tubesheets. Tubular, axially elongated electrochemical cells are supported on the tubes in the generator chamber. Fuel gas and oxidant gas are preheated in the intermediate chambers by the gases flowing on the other side of the tubes. Gas leakage around the tubes through the tubesheets is permitted. The buffer chambers reentrain the leaked fuel gas for reintroduction to the generator chamber.

  8. Apparatus and systems for measuring elongation of objects, methods of measuring, and reactor

    DOE Patents [OSTI]

    Rempe, Joy L.; Knudson, Darrell L.; Daw, Joshua E.; Condie, Keith G.; Stoots, Carl M.

    2011-11-29

    Elongation measurement apparatuses and systems comprise at least two Linear Variable Differential Transformers (LVDTs) with a push rod coupled to each of the at least two LVDTs at one longitudinal end thereof. At least one push rod extends to a base and is coupled thereto at an opposing longitudinal end, and at least one other push rod extends to a location spaced apart from the base and is configured to receive a sample between an opposing longitudinal end of the at least one other push rod and the base. Nuclear reactors comprising such apparatuses and systems and methods of measuring elongation of a material are also disclosed.

  9. Statement of Frank S. Swain, Chief Counsel for Advocacy, US Small Business Administration before the Subcommittee on Antitrust and Restraint of Trade, House Small Business Committee on utility competition with small businesses, May 22, 1984

    SciTech Connect (OSTI)

    Not Available

    1984-01-01

    Mr. Swain's statement and documentation present evidence that utilities have a competitive advantage over small businesses when they engage in unregulated activities because of cross subsidies and the effect on supplies and products that a large enterprise can have. The statement focuses on energy-related programs and the Commercial and Apartment Conservation Service (CACS) program with its mandated energy audits. Utility services that provide financing for conservation programs are less disruptive than those which provide supplies and installation. An appendix describing the electronic mail and postal service competition illustrates many of the principles involved.

  10. First Name: Last Name: David Babineau Thomas Bracke Dean Buchenauer

    Office of Environmental Management (EM)

    Name Last Name EMPLOYEE INFORMATION FORM Date of Birth SSN Married Not Married Male Female Current Home Address Line 1 Current Home Address Line 2 City State Zip Zip+4 Home Phone Number Department/Agency Operating Administration Office Position Title Grade Work Address Line 1 Work Address Line 2 City State Zip Zip+4 Office Phone Number Affidavit Date Appointment Date Apartment # Middle Name Use as Beneficiary Yes No U.S. Department of Energy 1000 Independence Ave. SW Washington DC 20585 STANDARD

  11. Method of controlling switching of a multiphase inductor-converter bridge. [Patent application

    DOE Patents [OSTI]

    Kustom, R.L.; Fuja, R.E.

    In an inductor-convertor circuit for transferring electrical energy between a storage coil and a load coil through a storage thyristor bridge, a load thyristor bridge, and a set of commutating capacitors, operation is improved by a method of changing the rate of delivery of energy in a given direction. The change in rate corresponds to a predetermined change in phase angle between the load bridge and the storage bridge, and comprises changing the phase of the bridge by two steps, each equal to half the predetermined change and occurring 180/sup 0/ apart. The method assures commutation and minimizes imbalances that lead otherwise to overvoltages. 11 figures.

  12. Shipping container for fissile material

    DOE Patents [OSTI]

    Crowder, H.E.

    1984-12-17

    The present invention is directed to a shipping container for the interstate transportation of enriched uranium materials. The shipping container is comprised of a rigid, high-strength, cylindrical-shaped outer vessel lined with thermal insulation. Disposed inside the thermal insulation and spaced apart from the inner walls of the outer vessel is a rigid, high-strength, cylindrical inner vessel impervious to liquid and gaseous substances and having the inner surfaces coated with a layer of cadmium to prevent nuclear criticality. The cadmium is, in turn, lined with a protective shield of high-density urethane for corrosion and wear protection. 2 figs.

  13. Solid oxide fuel cell generator

    DOE Patents [OSTI]

    Draper, R.; George, R.A.; Shockling, L.A.

    1993-04-06

    A solid oxide fuel cell generator has a pair of spaced apart tubesheets in a housing. At least two intermediate barrier walls are between the tubesheets and define a generator chamber between two intermediate buffer chambers. An array of fuel cells have tubes with open ends engaging the tubesheets. Tubular, axially elongated electrochemical cells are supported on the tubes in the generator chamber. Fuel gas and oxidant gas are preheated in the intermediate chambers by the gases flowing on the other side of the tubes. Gas leakage around the tubes through the tubesheets is permitted. The buffer chambers reentrain the leaked fuel gas for reintroduction to the generator chamber.

  14. New Whole-House Solutions Case Study: EcoVillage: A Net Zero Energy Ready Community, Ithaca, New York

    SciTech Connect (OSTI)

    2015-04-01

    The Consortium for Advanced Residential Buildings is working with the EcoVillage co-housing community and builder AquaZephyr in Ithaca, New York, on their third neighborhood called the Third Residential EcoVillage Experience (TREE). This community-scale project consists of 40 housing units—15 apartments, and 25 single family residences that range in size from 1,250 ft2–1,664 ft2 and cost from $80,000 to $235,000. The community is pursing DOE Zero Energy Ready Home (ZERH), US Green Building Council Leadership in Energy and Environmental Design (LEED) Gold, and ENERGY STAR certifications for the entire project.

  15. Method and apparatus of wide-angle optical beamsteering from a nanoantenna phased array

    DOE Patents [OSTI]

    Davids, Paul; DeRose, Christopher; Rakich, Peter Thomas

    2015-08-11

    An optical beam-steering apparatus is provided. The apparatus includes one or more optical waveguides and at least one row of metallic nanoantenna elements overlying and electromagnetically coupled to a respective waveguide. In each such row, individual nanoantenna elements are spaced apart along an optical propagation axis of the waveguide so that there is an optical propagation phase delay between successive pairs of nanoantenna elements along the row. The apparatus also includes a respective single electric heating element in thermal contact with each of the waveguides. Each heating element is arranged to heat, substantially uniformly, at least that portion of its waveguide that directly underlies the corresponding row of nanoantenna elements.

  16. Combined catalysts for the combustion of fuel in gas turbines

    DOE Patents [OSTI]

    Anoshkina, Elvira V.; Laster, Walter R.

    2012-11-13

    A catalytic oxidation module for a catalytic combustor of a gas turbine engine is provided. The catalytic oxidation module comprises a plurality of spaced apart catalytic elements for receiving a fuel-air mixture over a surface of the catalytic elements. The plurality of catalytic elements includes at least one primary catalytic element comprising a monometallic catalyst and secondary catalytic elements adjacent the primary catalytic element comprising a multi-component catalyst. Ignition of the monometallic catalyst of the primary catalytic element is effective to rapidly increase a temperature within the catalytic oxidation module to a degree sufficient to ignite the multi-component catalyst.

  17. " Million Housing Units, Final"

    U.S. Energy Information Administration (EIA) Indexed Site

    2 Structural and Geographic Characteristics of U.S. Homes, by Owner/Renter Status, 2009" " Million Housing Units, Final" ,,,,"Housing Unit Type" ,,,,"Single-Family Units",,,,"Apartments in Buildings With" ,,,,"Detached",,"Attached",,"2 to 4 Units",,"5 or More Units",,"Mobile Homes" ,"Total U.S.1 (millions)" "Structural and Geographic

  18. " Million Housing Units, Final"

    U.S. Energy Information Administration (EIA) Indexed Site

    Appliances in U.S. Homes, by Housing Unit Type, 2009" " Million Housing Units, Final" ,,"Housing Unit Type" ,,"Single-Family Units",,"Apartments in Buildings With" ,"Total U.S.1 (millions)" ,,,,,"5 or More Units","Mobile Homes" "Appliances",,"Detached","Attached","2 to 4 Units" "Total Homes",113.6,71.8,6.7,9,19.1,6.9 "Cooking Appliances" "Stoves (Units With

  19. " Million Housing Units, Final"

    U.S. Energy Information Administration (EIA) Indexed Site

    Space Heating in U.S. Homes, by Housing Unit Type, 2009" " Million Housing Units, Final" ,,"Housing Unit Type" ,,"Single-Family Units",,"Apartments in Buildings With" ,"Total U.S.1 (millions)" ,," Detached"," Attached"," 2 to 4 Units","5 or More Units","Mobile Homes" "Space Heating" "Total Homes",113.6,71.8,6.7,9,19.1,6.9 "Space Heating Equipment" "Use

  20. " Million Housing Units, Final"

    U.S. Energy Information Administration (EIA) Indexed Site

    Water Heating in U.S. Homes, by Housing Unit Type, 2009" " Million Housing Units, Final" ,,"Housing Unit Type" ,,"Single-Family Units",,"Apartments in Buildings With" ,"Total U.S.1 (millions)" ,," Detached"," Attached"," 2 to 4 Units","5 or More Units","Mobile Homes" "Water Heating" "Total Homes",113.6,71.8,6.7,9,19.1,6.9 "Number of Storage Tank Water Heaters"

  1. " Million Housing Units, Final"

    U.S. Energy Information Administration (EIA) Indexed Site

    2 Fuels Used and End Uses in U.S. Homes, by Owner/Renter Status, 2009" " Million Housing Units, Final" ,,,,"Housing Unit Type" ,,,,"Single-Family Units",,,,"Apartments in Buildings With" ,,,,"Detached",,"Attached",,"2 to 4 Units",,"5 or More Units",,"Mobile Homes" ,"Total U.S.1 (millions)" "Fuels Used and End

  2. " Million Housing Units, Final"

    U.S. Energy Information Administration (EIA) Indexed Site

    Televisions in U.S. Homes, by Housing Unit Type, 2009" " Million Housing Units, Final" ,,"Housing Unit Type" ,,"Single-Family Units",,"Apartments in Buildings With" ,"Total U.S.1 (millions)" ,," Detached"," Attached"," 2 to 4 Units","5 or More Units","Mobile Homes" "Televisions" "Total Homes",113.6,71.8,6.7,9,19.1,6.9 "Televisions" "Number of

  3. " Million Housing Units, Final"

    U.S. Energy Information Administration (EIA) Indexed Site

    Computers and Other Electronics in U.S. Homes, by Housing Unit Type, 2009" " Million Housing Units, Final" ,,"Housing Unit Type" ,,"Single-Family Units",,"Apartments in Buildings With" ,"Total U.S.1 (millions)" ,," Detached"," Attached"," 2 to 4 Units","5 or More Units","Mobile Homes" "Computers and Other Electronics" "Total Homes",113.6,71.8,6.7,9,19.1,6.9

  4. " Million Housing Units, Final"

    U.S. Energy Information Administration (EIA) Indexed Site

    Household Demographics of U.S. Homes, by Housing Unit Type, 2009" " Million Housing Units, Final" ,,"Housing Unit Type" ,,"Single-Family Units",,"Apartments in Buildings With" ,"Total U.S.1 (millions)" ,," Detached"," Attached"," 2 to 4 Units","5 or More Units","Mobile Homes" "Household Demographics" "Total Homes",113.6,71.8,6.7,9,19.1,6.9 "Number of Household

  5. " Million U.S. Housing Units"

    U.S. Energy Information Administration (EIA) Indexed Site

    0 Home Appliances Usage Indicators by Type of Housing Unit, 2005" " Million U.S. Housing Units" ,,"Type of Housing Unit" ," Housing Units (millions) ","Single-Family Units",,"Apartments in Buildings With--" "Home Appliances Usage Indicators",,"Detached","Attached","2 to 4 Units","5 or More Units","Mobile Homes" "Total",111.1,72.1,7.6,7.8,16.7,6.9 "Cooking

  6. " Million U.S. Housing Units"

    U.S. Energy Information Administration (EIA) Indexed Site

    1 Home Electronics Characteristics by Type of Housing Unit, 2005" " Million U.S. Housing Units" ,,"Type of Housing Unit" ,"Housing Units (millions)","Single-Family Units",,"Apartments in Buildings With--" "Home Electronics Characteristics",,"Detached","Attached","2 to 4 Units","5 or More Units","Mobile Homes" "Total",111.1,72.1,7.6,7.8,16.7,6.9 "Personal

  7. " Million U.S. Housing Units"

    U.S. Energy Information Administration (EIA) Indexed Site

    2 Home Electronics Usage Indicators by Type of Housing Unit, 2005" " Million U.S. Housing Units" ,,"Type of Housing Unit" ,"Housing Units (millions)","Single-Family Units",,"Apartments in Buildings With--" "Home Electronics Usage Indicators",,"Detached","Attached","2 to 4 Units","5 or More Units","Mobile Homes" "Total",111.1,72.1,7.6,7.8,16.7,6.9 "Personal

  8. " Million U.S. Housing Units"

    U.S. Energy Information Administration (EIA) Indexed Site

    3 Household Characteristics by Type of Housing Unit, 2005" " Million U.S. Housing Units" ,,"Type of Housing Unit" ,"Housing Units (millions)","Single-Family Units",,"Apartments in Buildings With--" "Household Characteristics",,"Detached","Attached","2 to 4 Units","5 or More Units","Mobile Homes" "Total",111.1,72.1,7.6,7.8,16.7,6.9 "Household Size" "1

  9. " Million U.S. Housing Units"

    U.S. Energy Information Administration (EIA) Indexed Site

    Housing Unit Characteristics by Type of Housing Unit, 2005" " Million U.S. Housing Units" ,,"Type of Housing Unit" ,"Housing Units (millions)","Single-Family Units",,"Apartments in Buildings With--" "Housing Unit Characteristics",,"Detached","Attached","2 to 4 Units","5 or More Units","Mobile Homes" "Total",111.1,72.1,7.6,7.8,16.7,6.9 "Census Region and

  10. " Million U.S. Housing Units"

    U.S. Energy Information Administration (EIA) Indexed Site

    2 Living Space Characteristics by Type of Housing Unit, 2005" " Million U.S. Housing Units" ,,"Type of Housing Unit" ,"Housing Units (millions)","Single-Family Units",,"Apartments in Buildings With--" "Living Space Characteristics",,"Detached","Attached","2 to 4 Units","5 or More Units","Mobile Homes" "Total",111.1,72.1,7.6,7.8,16.7,6.9 "Floorspace (Square Feet)"

  11. " Million U.S. Housing Units"

    U.S. Energy Information Administration (EIA) Indexed Site

    4 Space Heating Characteristics by Type of Housing Unit, 2005" " Million U.S. Housing Units" ,,"Type of Housing Unit" ,"Housing Units (millions)","Single-Family Units",,"Apartments in Buildings With--" "Space Heating Characteristics",,"Detached","Attached","2 to 4 Units","5 or More Units","Mobile Homes" "Total",111.1,72.1,7.6,7.8,16.7,6.9 "Do Not Have Space Heating

  12. " Million U.S. Housing Units"

    U.S. Energy Information Administration (EIA) Indexed Site

    5 Space Heating Usage Indicators by Type of Housing Unit, 2005" " Million U.S. Housing Units" ,,"Type of Housing Unit" ,"Housing Units (millions)","Single-Family Units",,"Apartments in Buildings With--" "Space Heating Usage Indicators",,"Detached","Attached","2 to 4 Units","5 or More Units","Mobile Homes" "Total U.S. Housing Units",111.1,72.1,7.6,7.8,16.7,6.9 "Do Not

  13. " Million U.S. Housing Units"

    U.S. Energy Information Administration (EIA) Indexed Site

    6 Air Conditioning Characteristics by Type of Housing Unit, 2005" " Million U.S. Housing Units" ,,"Type of Housing Unit" ,"Housing Units (millions)","Single-Family Units",,"Apartments in Buildings With--" "Air Conditioning Characteristics",,"Detached","Attached","2 to 4 Units","5 or More Units","Mobile Homes" "Total",111.1,72.1,7.6,7.8,16.7,6.9 "Do Not Have Cooling

  14. " Million U.S. Housing Units"

    U.S. Energy Information Administration (EIA) Indexed Site

    7 Air Conditioning Usage Indicators by Type of Housing Unit, 2005" " Million U.S. Housing Units" ,,"Type of Housing Unit" ,"Housing Units (millions)","Single-Family Units",,"Apartments in Buildings With--" "Air Conditioning Usage Indicators",,"Detached","Attached","2 to 4 Units","5 or More Units","Mobile Homes" "Total",111.1,72.1,7.6,7.8,16.7,6.9 "Do Not Have Cooling

  15. " Million U.S. Housing Units"

    U.S. Energy Information Administration (EIA) Indexed Site

    9 Home Appliances Characteristics by Type of Housing Unit, 2005" " Million U.S. Housing Units" ,,"Type of Housing Unit" ,"Housing Units (millions)","Single-Family Units",,"Apartments in Buildings With--" "Home Appliances Characteristics",,"Detached","Attached","2 to 4 Units","5 or More Units","Mobile Homes" "Total U.S.",111.1,72.1,7.6,7.8,16.7,6.9 "Cooking

  16. " Million U.S. Housing Units"

    U.S. Energy Information Administration (EIA) Indexed Site

    3 Household Characteristics by Owner-Occupied Housing Unit, 2005" " Million U.S. Housing Units" ,," Owner-Occupied Housing Units (millions)","Type of Owner-Occupied Housing Unit" ,"U.S. Housing Units (millions" ,,,"Single-Family Units",,"Apartments in Buildings With--" "Household Characteristics",,,"Detached","Attached","2 to 4 Units","5 or More Units","Mobile Homes"

  17. " Million U.S. Housing Units"

    U.S. Energy Information Administration (EIA) Indexed Site

    3 Household Characteristics by Renter-Occupied Housing Unit, 2005" " Million U.S. Housing Units" ,," Renter-Occupied Housing Units (millions)","Type of Renter-Occupied Housing Unit" ,"U.S. Housing Units (millions" ,,,"Single-Family Units",,"Apartments in Buildings With--" "Household Characteristics",,,"Detached","Attached","2 to 4 Units","5 or More Units","Mobile Homes"

  18. " Million U.S. Housing Units"

    U.S. Energy Information Administration (EIA) Indexed Site

    3 Lighting Usage Indicators by Type of Housing Unit, 2005" " Million U.S. Housing Units" ,,"Type of Housing Unit" ,"Housing Units (millions)","Single-Family Units",,"Apartments in Buildings With--" "Lighting Usage Indicators",,"Detached","Attached","2 to 4 Units","5 or More Units","Mobile Homes" "Total U.S. Housing Units",111.1,72.1,7.6,7.8,16.7,6.9 "Indoor Lights

  19. " Million U.S. Housing Units"

    U.S. Energy Information Administration (EIA) Indexed Site

    8 Water Heating Characteristics by Type of Housing Unit, 2005" " Million U.S. Housing Units" ,,"Type of Housing Unit" ,"Housing Units (millions)","Single-Family Units",,"Apartments in Buildings With--" "Water Heating Characteristics",,"Detached","Attached","2 to 4 Units","5 or More Units","Mobile Homes" "Total",111.1,72.1,7.6,7.8,16.7,6.9 "Number of Water

  20. "Table HC2.1 Structural and Geographic Characteristics of U.S. Homes, By Housing Unit Type, 2009"

    U.S. Energy Information Administration (EIA) Indexed Site

    Structural and Geographic Characteristics of U.S. Homes, By Housing Unit Type, 2009" " Million Housing Units, Final" ,,"Housing Unit Type" ,,"Single-Family Units",,"Apartments in Buildings With" ,"Total U.S.1 (millions)" "Structural and Geographic Characteristics",,,,"2 to 4 Units","5 or More Units","Mobile Homes" ,,"Detached","Attached" "Total

  1. "Table HC3.1 Housing Unit Characteristics by Owner-Occupied Housing Unit, 2005"

    U.S. Energy Information Administration (EIA) Indexed Site

    Housing Unit Characteristics by Owner-Occupied Housing Unit, 2005" " Million Housing Units" ,," Owner-Occupied Housing Units (millions)","Type of Owner-Occupied Housing Unit" ,"U.S. Housing Units (millions" ,,,"Single-Family Units",,"Apartments in Buildings With--" "Housing Unit Characteristics",,,"Detached","Attached","2 to 4 Units","5 or More Units","Mobile Homes"

  2. "Table HC3.10 Home Appliances Usage Indicators by Owner-Occupied Housing Unit, 2005"

    U.S. Energy Information Administration (EIA) Indexed Site

    0 Home Appliances Usage Indicators by Owner-Occupied Housing Unit, 2005" " Million U.S. Housing Units" ,," Owner-Occupied Housing Units (millions)","Type of Owner-Occupied Housing Unit" ,"U.S. Housing Units (millions)" ,,,"Single-Family Units",,"Apartments in Buildings With--" "Home Appliances Usage Indicators",,,"Detached","Attached","2 to 4 Units","5 or More Units","Mobile

  3. "Table HC3.11 Home Electronics Characteristics by Owner-Occupied Housing Unit, 2005"

    U.S. Energy Information Administration (EIA) Indexed Site

    1 Home Electronics Characteristics by Owner-Occupied Housing Unit, 2005" " Million U.S. Housing Units" ,," Owner-Occupied Housing Units (millions)","Type of Owner-Occupied Housing Unit" ,"U.S. Housing Units (millions)" ,,,"Single-Family Units",,"Apartments in Buildings With--" "Home Electronics Characteristics",,,"Detached","Attached","2 to 4 Units","5 or More Units","Mobile

  4. "Table HC3.12 Home Electronics Usage Indicators by Owner-Occupied Housing Unit, 2005"

    U.S. Energy Information Administration (EIA) Indexed Site

    2 Home Electronics Usage Indicators by Owner-Occupied Housing Unit, 2005" " Million U.S. Housing Units" ,," Owner-Occupied Housing Units (millions)","Type of Owner-Occupied Housing Unit" ,"U.S. Housing Units (millions)" ,,,"Single-Family Units",,"Apartments in Buildings With--" "Home Electronics Usage Indicators",,,"Detached","Attached","2 to 4 Units","5 or More Units","Mobile

  5. "Table HC3.13 Lighting Usage Indicators by Owner-Occupied Housing Unit Zone, 2005"

    U.S. Energy Information Administration (EIA) Indexed Site

    3 Lighting Usage Indicators by Owner-Occupied Housing Unit Zone, 2005" " Million U.S. Housing Units" ,," Owner-Occupied Housing Units (millions)","Type of Owner-Occupied Housing Unit" ,"U.S. Housing Units (millions" ,,,"Single-Family Units",,"Apartments in Buildings With--" "Lighting Usage Indicators",,,"Detached","Attached","2 to 4 Units","5 or More Units","Mobile Homes"

  6. "Table HC3.2 Living Space Characteristics by Owner-Occupied Housing Units, 2005"

    U.S. Energy Information Administration (EIA) Indexed Site

    2 Living Space Characteristics by Owner-Occupied Housing Units, 2005" " Million U.S. Housing Units" ,," Owner-Occupied Housing Units (millions)","Type of Owner-Occupied Housing Unit" ," Housing Units (millions) " ,,,"Single-Family Units",,"Apartments in Buildings With--" "Living Space Characteristics",,,"Detached","Attached","2 to 4 Units","5 or More Units","Mobile Homes"

  7. "Table HC3.4 Space Heating Characteristics by Owner-Occupied Housing Unit, 2005"

    U.S. Energy Information Administration (EIA) Indexed Site

    4 Space Heating Characteristics by Owner-Occupied Housing Unit, 2005" " Million U.S. Housing Units" ,," Owner-Occupied Housing Units (millions)","Type of Owner-Occupied Housing Unit" ," Housing Units (millions)" ,,,"Single-Family Units",,"Apartments in Buildings With--" "Space Heating Characteristics",,,"Detached","Attached","2 to 4 Units","5 or More Units","Mobile Homes"

  8. "Table HC3.5 Space Heating Usage Indicators by Owner-Occupied Housing Unit, 2005"

    U.S. Energy Information Administration (EIA) Indexed Site

    5 Space Heating Usage Indicators by Owner-Occupied Housing Unit, 2005" " Million U.S. Housing Units" ,," Owner-Occupied Housing Units (millions)","Type of Owner-Occupied Housing Unit" ," Housing Units (millions)" ,,,"Single-Family Units",,"Apartments in Buildings With--" "Space Heating Usage Indicators",,,"Detached","Attached","2 to 4 Units","5 or More Units","Mobile

  9. "Table HC3.6 Air Conditioning Characteristics by Owner-Occupied Housing Units, 2005"

    U.S. Energy Information Administration (EIA) Indexed Site

    6 Air Conditioning Characteristics by Owner-Occupied Housing Units, 2005" " Million U.S. Housing Units" ,," Owner-Occupied Housing Units (millions)","Type of Owner-Occupied Housing Unit" ,"U.S. Housing Units (millions" ,,,"Single-Family Units",,"Apartments in Buildings With--" "Air Conditioning Characteristics",,,"Detached","Attached","2 to 4 Units","5 or More Units","Mobile

  10. "Table HC3.8 Water Heating Characteristics by Owner-Occupied Housing Unit, 2005"

    U.S. Energy Information Administration (EIA) Indexed Site

    8 Water Heating Characteristics by Owner-Occupied Housing Unit, 2005" " Million U.S. Housing Units" ,," Owner-Occupied Housing Units (millions)","Type of Owner-Occupied Housing Unit" ,"U.S. Housing Units (millions" ,,,"Single-Family Units",,"Apartments in Buildings With--" "Water Heating Characteristics",,,"Detached","Attached","2 to 4 Units","5 or More Units","Mobile

  11. "Table HC3.9 Home Appliances Characteristics by Owner-Occupied Housing Unit, 2005"

    U.S. Energy Information Administration (EIA) Indexed Site

    HC3.9 Home Appliances Characteristics by Owner-Occupied Housing Unit, 2005" " Million U.S. Housing Units" ,," Owner-Occupied Housing Units (millions)","Type of Owner-Occupied Housing Unit" ,"U.S. Housing Units (millions" ,,,"Single-Family Units",,"Apartments in Buildings With--" "Home Appliances Characteristics",,,"Detached","Attached","2 to 4 Units","5 or More Units","Mobile

  12. "Table HC4.1 Housing Unit Characteristics by Renter-Occupied Housing Unit, 2005"

    U.S. Energy Information Administration (EIA) Indexed Site

    Housing Unit Characteristics by Renter-Occupied Housing Unit, 2005" " Million Housing Units" ,," Renter-Occupied Housing Units (millions)","Type of Renter-Occupied Housing Unit" ,"U.S. Housing Units (millions" ,,,"Single-Family Units",,"Apartments in Buildings With--" "Housing Unit Characteristics",,,"Detached","Attached","2 to 4 Units","5 or More Units","Mobile Homes"

  13. "Table HC4.10 Home Appliances Usage Indicators by Renter-Occupied Housing Unit, 2005"

    U.S. Energy Information Administration (EIA) Indexed Site

    0 Home Appliances Usage Indicators by Renter-Occupied Housing Unit, 2005" " Million U.S. Housing Units" ,," Renter-Occupied Housing Units (millions)","Type of Renter-Occupied Housing Unit" ," Housing Units (millions)" ,,,"Single-Family Units",,"Apartments in Buildings With--" "Home Appliances Usage Indicators",,,"Detached","Attached","2 to 4 Units","5 or More Units","Mobile

  14. "Table HC4.11 Home Electronics Characteristics by Renter-Occupied Housing Unit, 2005"

    U.S. Energy Information Administration (EIA) Indexed Site

    1 Home Electronics Characteristics by Renter-Occupied Housing Unit, 2005" " Million U.S. Housing Units" ,," Renter-Occupied Housing Units (millions)","Type of Renter-Occupied Housing Unit" ,"U.S. Housing Units (millions" ,,,"Single-Family Units",,"Apartments in Buildings With--" "Home Electronics Characteristics",,,"Detached","Attached","2 to 4 Units","5 or More Units","Mobile

  15. "Table HC4.12 Home Electronics Usage Indicators by Renter-Occupied Housing Unit, 2005"

    U.S. Energy Information Administration (EIA) Indexed Site

    2 Home Electronics Usage Indicators by Renter-Occupied Housing Unit, 2005" " Million U.S. Housing Units" ,," Renter-Occupied Housing Units (millions)","Type of Renter-Occupied Housing Unit" ,"U.S. Housing Units (millions)" ,,,"Single-Family Units",,"Apartments in Buildings With--" "Home Electronics Usage Indicators",,,"Detached","Attached","2 to 4 Units","5 or More

  16. "Table HC4.13 Lighting Usage Indicators by Renter-Occupied Housing Unit Zone, 2005"

    U.S. Energy Information Administration (EIA) Indexed Site

    3 Lighting Usage Indicators by Renter-Occupied Housing Unit Zone, 2005" " Million U.S. Housing Units" ,," Renter-Occupied Housing Units (millions)","Type of Renter-Occupied Housing Unit" ,"U.S. Housing Units (millions" ,,,"Single-Family Units",,"Apartments in Buildings With--" "Lighting Usage Indicators",,,"Detached","Attached","2 to 4 Units","5 or More Units","Mobile

  17. "Table HC4.2 Living Space Characteristics by Renter-Occupied Housing Units, 2005"

    U.S. Energy Information Administration (EIA) Indexed Site

    2 Living Space Characteristics by Renter-Occupied Housing Units, 2005" " Million U.S. Housing Units" ,," Renter-Occupied Housing Units (millions)","Type of Renter-Occupied Housing Unit" ,"U.S. Housing Units (millions" ,,,"Single-Family Units",,"Apartments in Buildings With--" "Living Space Characteristics",,,"Detached","Attached","2 to 4 Units","5 or More Units","Mobile

  18. "Table HC4.4 Space Heating Characteristics by Renter-Occupied Housing Unit, 2005"

    U.S. Energy Information Administration (EIA) Indexed Site

    4 Space Heating Characteristics by Renter-Occupied Housing Unit, 2005" " Million U.S. Housing Units" ,," Renter-Occupied Housing Units (millions)","Type of Renter-Occupied Housing Unit" ," Housing Units (millions)" ,,,"Single-Family Units",,"Apartments in Buildings With--" "Space Heating Characteristics",,,"Detached","Attached","2 to 4 Units","5 or More Units","Mobile

  19. "Table HC4.5 Space Heating Usage Indicators by Renter-Occupied Housing Unit, 2005"

    U.S. Energy Information Administration (EIA) Indexed Site

    5 Space Heating Usage Indicators by Renter-Occupied Housing Unit, 2005" " Million U.S. Housing Units" ,," Renter-Occupied Housing Units (millions)","Type of Renter-Occupied Housing Unit" ," Housing Units (millions)" ,,,"Single-Family Units",,"Apartments in Buildings With--" "Space Heating Usage Indicators",,,"Detached","Attached","2 to 4 Units","5 or More Units","Mobile

  20. "Table HC4.6 Air Conditioning Characteristics by Renter-Occupied Housing Units, 2005"

    U.S. Energy Information Administration (EIA) Indexed Site

    6 Air Conditioning Characteristics by Renter-Occupied Housing Units, 2005" " Million U.S. Housing Units" ,," Renter-Occupied Housing Units (millions)","Type of Renter-Occupied Housing Unit" ," Housing Units (millions)" ,,,"Single-Family Units",,"Apartments in Buildings With--" "Air Conditioning Characteristics",,,"Detached","Attached","2 to 4 Units","5 or More Units","Mobile