Powered by Deep Web Technologies
Note: This page contains sample records for the topic "aos instrument suite" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

ARM - Instrument - aos  

NLE Websites -- All DOE Office Websites (Extended Search)

govInstrumentsaos govInstrumentsaos Documentation AOS : Handbook AOS : Instrument Mentor Monthly Summary (IMMS) reports AOS : Data Quality Assessment (DQA) reports ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Instrument : Aerosol Observing System (AOS) Beneficiary of Recovery Act funding. Instrument Categories Aerosols General Overview The aerosol observing system (AOS) is the primary Atmospheric Radiation Measurement (ARM) platform for in situ aerosol measurements at the surface. The principal measurements are those of the aerosol absorption and scattering coefficients as a function of the particle size and radiation wavelength. Additional measurements include those of the particle number concentration, size distribution, hygroscopic growth, and inorganic

2

A Comparison of Meteorological Observations from South Pole Station before and after Installation of a New Instrument Suite  

Science Conference Proceedings (OSTI)

The Amundsen–Scott South Pole surface meteorological instrument suite was upgraded in 2004. To ensure that the new and old instruments were recording similar information, the two suites of instruments ran simultaneously for a year. Statistical ...

L. M. Keller; K. A. Baker; M. A. Lazzara; J. Gallagher

2009-08-01T23:59:59.000Z

3

ELT instrumentation for seeing-limited and AO-corrected observations: A comparison  

E-Print Network (OSTI)

The next generation of large ground-based optical and infrared telescopes will provide new challenges for designers of astronomical instrumentation. The varied science cases for these extremely large telescopes (ELTs) require a large range of angular resolutions, from near diffraction-limited performance via correction of atmospheric turbulence using adaptive optics (AO), to seeing-limited observations. Moreover, the scientific output of the telescopes must also be optimized with the consideration that, with current technology, AO is relatively ineffective at visible wavelengths, and that atmospheric conditions will often preclude high-performance AO. This paper explores some of the issues that arise when designing ELT instrumentation that operates across a range of angular resolutions and wavelengths. We show that instruments designed for seeing-limited or seeing-enhanced observations have particular challenges in terms of size and mass, while diffraction-limited instruments are not as straightforward as might be imagined.

Colin Cunningham; Chris Evans; Guy Monnet; Miska Le Louarn

2008-01-19T23:59:59.000Z

4

ARM - Instrument -  

NLE Websites -- All DOE Office Websites (Extended Search)

list contains a mix of naming conventions-individual instruments versus instruments suites. Please see the instrument handbooks for a list of sensors in the instrument suites....

5

ARM - Campaign Instrument - aos  

NLE Websites -- All DOE Office Websites (Extended Search)

Carbonaceous Aerosol and Radiative Effects Study (CARES) Download Data McClellan AFB, Sacramento, CA, 2010.06.02 - 2010.06.28 Carbonaceous Aerosol and Radiative Effects Study...

6

Instruments  

Science Conference Proceedings (OSTI)

Instruments. A, B, C, D, E, F, G, H. 1, Time (s), T (deg C), Rel Humidity (%), Ion chamber 1 (volts), Ion chamber 2 (volts), Mass conc. ...

2012-01-10T23:59:59.000Z

7

Instruments  

NLE Websites -- All DOE Office Websites (Extended Search)

Instruments Instruments Available to Users CISA 5500XL SOLiD Sequencers Electron Microscope: Dual FIB/SEM (FEI Helios) Electron Microscope: Transmission, CRYO 2005 Flow Cytometer: Influx Laser Capture Microdissection Mammalian Cell Culture Microbial Bioreactors Microscope: Confocal, Multi-Photon/FLIM Integrated Microscope: Fluorescence, Confocal, Real-Time Microscope: Fluorescence, Single-Molecule Microscope: Fluorescence, Single-Molecule / Patch Clamp Microscope: Fluorescence, Super Resolution STORM Microscope: Helium Ion Microscope: Scanning Probe - AFM Compound DepoSItIon AnD MICrofAbrICAtIon Deposition: Hybrid Thin Film Deposition System Deposition: Molecular Beam Epitaxy #1 Deposition: Pulsed Laser Deposition System Electron Microscope: Dual FIB/SEM (FEI

8

LANL Go Suite  

NLE Websites -- All DOE Office Websites (Extended Search)

LANL Go Suite LANL Go Suite LANL Go Suite The LANL Go Suite is a collection of packages, libraries, utilities, and software patches related to Google's Go programming language (http://www.golang.org/). September 24, 2013 software Available for thumbnail of Feynman Center (505) 665-9090 Email LANL Go Suite The LANL Go Suite is a collection of packages, libraries, utilities, and software patches related to Google's Go programming language (http://www.golang.org/). The LANL Go Suite largely takes a high-performance computing angle to Go by providing some of the mechanisms needed to use Go in a supercomputing environment. For instance, the LANL Go Suite provides a Go interface to PAPI, the University of Tennessee at Knoxville's Performance Application Programming Interface (http://icl.cs.utk.edu/papi/), which helps software developers identify

9

STAYS PNNL SUITE  

Energy Science and Technology Software Center (OSTI)

002851IBMPC00 STAYSL PNNL Suite  http://radiochemscieng.pnnl.gov/research_areas/research_area_description.asp?id=283 

10

BESTEST Test Suites  

NLE Websites -- All DOE Office Websites (Extended Search)

BESTEST Test Suites BESTEST (Building Energy Simulation TEST) is a method for testing, diagnosing, and validating the capabilities of building energy simulation programs. The...

11

Directed Test Suite Augmentation.  

E-Print Network (OSTI)

??Test suite augmentation techniques are used in regression testing to identify code elements affected by changes and to generate test cases to cover those elements.… (more)

Xu, Zhihong

2013-01-01T23:59:59.000Z

12

Aerosol Observing System (AOS) Handbook  

Science Conference Proceedings (OSTI)

The Aerosol Observing System (AOS) is a suite of in situ surface measurements of aerosol optical and cloud-forming properties. The instruments measure aerosol properties that influence the earth’s radiative balance. The primary optical measurements are those of the aerosol scattering and absorption coefficients as a function of particle size and radiation wavelength and cloud condensation nuclei (CCN) measurements as a function of percent supersaturation. Additional measurements include those of the particle number concentration and scattering hygroscopic growth. Aerosol optical measurements are useful for calculating parameters used in radiative forcing calculations such as the aerosol single-scattering albedo, asymmetry parameter, mass scattering efficiency, and hygroscopic growth. CCN measurements are important in cloud microphysical models to predict droplet formation.

Jefferson, A

2011-01-17T23:59:59.000Z

13

Security Suites | ornl.gov  

NLE Websites -- All DOE Office Websites (Extended Search)

Security Suites Available by Internet Service Providers Comcast Comcast offers the Norton Security Suite with antivirus and firewall software for your protection, for no additional...

14

ORNL Neutron Sciences Instruments  

NLE Websites -- All DOE Office Websites (Extended Search)

Instruments banner Instruments banner ORNL Neutron Sciences Instruments SNS and HFIR provide researchers with two complementary world-class suites of neutron scattering instruments and beam lines. All the instruments are supported by a variety of sample environments and data analysis and visualization capabilities. Before submitting a proposal for a specific instrument, please contact the appropriate instrument scientist to make sure your research is feasible for that instrument. Instruments Currently Available to Users SNS Beam Line Instrument Name HFIR Beam Line Instrument Name 1B NOMAD Nanoscale-Ordered Materials Diffractometer CG-1 Development Beam Line 2 BASIS Backscattering Spectrometer CG-1D IMAGING Neutron Imaging Prototype Facility 3 SNAP Spallation Neutrons and Pressure Diffractometer CG-2 GP-SANS

15

Aerosol observing system platform integration and AAF instrumentation  

SciTech Connect

As part of the federal government’s 2009 American Recovery and Reinvestment Act (ARRA), the U.S. DOE Office of Science allocated funds for the capital upgrade of the Atmospheric Radiation Measurement (ARM) Climate Research Facility to improve and expand observational capabilities related to cloud and aerosol properties. The ARM Facility was established as a national user facility for the global scientific community to conduct a wide range of interdisciplinary science. Part of the ARRA-funded expansion of the ARM Facility includes four new Aerosol Observing Systems (AOS) to be designed, instrumented, and mentored by BNL. The enclosures will be customized SeaTainers. These new platforms ([AMF2]: ARM Mobile Facility-2; [TWP-D]: Tropical Western Pacific at Darwin; and [MAOS-A]/[MAOS-C]: Mobile Aerosol Observing System-Aerosol/-Chemistry) will provide a laboratory environment for fielding instruments to collect data on aerosol life cycle, microphysics, and optical/physical properties. The extensive instrument suite includes both established methods and initial deployments of new techniques to add breadth and depth to the AOS data sets. The platforms are designed: (1) to have all instruments pre-installed before deployment, allowing a higher measurement duty cycle; (2) with a standardized configuration improving the robustness of data inter-comparability; (3) to provide remote access capability for instrument mentors; and (4) to readily accommodate guest instrumentation. The first deployment of the AMF2 platform will be at the upcoming StormVEx campaign held at Steamboat Springs, Colorado, October 15, 2010–March 31, 2011 while the TWP-D AOS will be stationed at the ARM Darwin site. The maiden deployments of the MAOS-A and MAOS-C platforms will be during the Ganges Valley Experiment (GVAX) scheduled for April 2011–April 2012. In addition to the ground-based AOS platforms, thee major instrument builds for the AAF are also being undertaken (new trace gas package [NO, NOx, NOy, CO, O3, and SO2]; Scanning Mobility Particle Sampler [SMPS]; and Particle into Liquid Sampler [PILS]). The current status of the AOS platforms, instrument suites, instituted QA/QC activities, projected AOS VAPs, and inlet design, as well as still-unresolved issues, will be presented.

Springston, S.; Sedlacek, A.

2010-03-15T23:59:59.000Z

16

ARM - Instrument - prp  

NLE Websites -- All DOE Office Websites (Extended Search)

govInstrumentsprp govInstrumentsprp Documentation PRP : Instrument Mentor Monthly Summary (IMMS) reports PRP : Data Quality Assessment (DQA) reports ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Instrument : Portable Radiation Package (PRP) Instrument Categories Radiometric The Portable Radiation Package (PRP) is an instrument suite to collect atmospheric radiation measurements on a moving platform. The instrument suite consists of a Precision Spectral Pyranometer (PSP), Precision Infrared Radiometer (PIR), and continuously rotating shadowband radiometer. Output Datastreams 1sprprad : Portable Radiation Package: Broadband Radiometers, 1 second resolution 6sprpfrsr : Portable Radiation Package: Fast Rotating Shadowband

17

ARM - Instrument Location Table  

NLE Websites -- All DOE Office Websites (Extended Search)

govInstrumentsLocation Table govInstrumentsLocation Table Instruments Location Table Contacts Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Instrument Locations Site abbreviations explained in the key. Instrument Name Abbreviation NSA SGP TWP AMF C1 C2 EF BF CF EF IF C1 C2 C3 EF IF Aerosol Chemical Speciation Monitor ACSM Atmospheric Emitted Radiance Interferometer AERI Aethalometer AETH Ameriflux Measurement Component AMC Aerosol Observing System AOS Meteorological Measurements associated with the Aerosol Observing System AOSMET Broadband Radiometer Station BRS

18

BRC-CBEFF Conformance Test Suite  

Science Conference Proceedings (OSTI)

... technical interfaces), and the development of associated conformance testing architectures and testing suites designed to test for conformance to ...

2013-08-01T23:59:59.000Z

19

ARM - Site Instruments  

NLE Websites -- All DOE Office Websites (Extended Search)

Central FacilityInstruments Central FacilityInstruments SGP Related Links Facilities and Instruments Central Facility Boundary Facility Extended Facility Intermediate Facility Radiometric Calibration Facility Geographic Information ES&H Guidance Statement Operations Science Field Campaigns Visiting the Site Fact Sheet Images Information for Guest Scientists Contacts Instruments : Central Facility [ Single installation ] ACSM Aerosol Chemical Speciation Monitor Aerosols Browse Data [ Single installation ] AERI Atmospheric Emitted Radiance Interferometer Radiometric Browse Plots Browse Data [ Single installation ] AOS Aerosol Observing System Aerosols Browse Plots Browse Data [ Single installation ] BRS Broadband Radiometer Station Radiometric Browse Plots Browse Data [ Single installation ] BSRN Baseline Solar Radiation Network

20

ARM - Site Instruments  

NLE Websites -- All DOE Office Websites (Extended Search)

AlaskaInstruments AlaskaInstruments NSA Related Links Facilities and Instruments Barrow Atqasuk ES&H Guidance Statement Operations Science Field Campaigns Visiting the Site Images Information for Guest Scientists Contacts Instruments : North Slope Alaska [ Single installation ] AERI Atmospheric Emitted Radiance Interferometer Radiometric Browse Plots Browse Data [ Single installation ] AMC Ameriflux Measurement Component Radiometric, Surface/Subsurface Properties Browse Data [ Single installation ] AOS Aerosol Observing System Aerosols Browse Data [ Single installation ] CCN Cloud Condensation Nuclei Particle Counter Aerosols Browse Data [ Single installation ] CLAP Continuous Light Absorption Photometer Aerosols Browse Data [ Single installation ] CPC Condensation Particle Counter Aerosols Browse Data

Note: This page contains sample records for the topic "aos instrument suite" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

ARM - Site Instruments  

NLE Websites -- All DOE Office Websites (Extended Search)

PlainsInstruments PlainsInstruments SGP Related Links Facilities and Instruments Central Facility Boundary Facility Extended Facility Intermediate Facility Radiometric Calibration Facility Geographic Information ES&H Guidance Statement Operations Science Field Campaigns Visiting the Site Fact Sheet Images Information for Guest Scientists Contacts Instruments : Southern Great Plains [ Single installation ] ACSM Aerosol Chemical Speciation Monitor Aerosols Browse Data [ Installed at 5 facilities ] AERI Atmospheric Emitted Radiance Interferometer Radiometric Browse Plots Browse Data [ Single installation ] AOS Aerosol Observing System Aerosols Browse Plots Browse Data [ Single installation ] BRS Broadband Radiometer Station Radiometric Browse Plots Browse Data [ Single installation ] BSRN Baseline Solar Radiation Network

22

ARM - Instrument - tracegas  

NLE Websites -- All DOE Office Websites (Extended Search)

govInstrumentstracegas govInstrumentstracegas Documentation TRACEGAS : Instrument Mentor Monthly Summary (IMMS) reports TRACEGAS : Data Quality Assessment (DQA) reports ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Instrument : Trace gas concentrations (TRACEGAS) Instrument Categories Aerosols Concentrations of trace gases important for atmospheric chemistry and aerosol particle formation (e.g., carbon monoxide, various nitrogen oxides, sulfur dioxide, and ozone) typically are measured by gas filter correlation, fluorescence, or chemiluminescence. The TRACEGAS is part of the Aerosol Observing System (AOS). Output Datastreams aosco : AOS: Carbon Monoxide Analyzer aosnox : AOS: Oxides of Nitrogen Analyzer

23

INSTRUMENT STANDARDS  

SciTech Connect

Hanford Atomic Production Operation specification guides for instruments, radiation detection instruments, instrumentation, thermocouples, orifices, process control instruments, and electronic design are presented. Details of this manual are given in TID-4100(Suppl.). (N.W.R.)

1963-01-01T23:59:59.000Z

24

Building Energy Software Tools Directory: EEM Suite  

NLE Websites -- All DOE Office Websites (Extended Search)

EEM Suite EEM Suite EEM Suite Logo Enables large companies to proactively monitor, analyze and manage energy costs and consumption. EEM Suite combines analysis and reporting tools; real-time, event-driven alerts; and Web-based enterprise visibility into a single solution so users can control their energy costs and usage. EEM Suite leverages meter, billing, production, real-time price, rate and weather information to drive significant energy and water reductions. Users can control utility costs through timely identification of billing errors and overcharges, drive accountability through accurate cost allocation and tenant rebilling, monitor performance against budgets, predict energy requirements to assist in key operational activities planning, improve operational efficiency through continuous facility and

25

ARM - Site Instruments  

NLE Websites -- All DOE Office Websites (Extended Search)

Point Reyes National Seashore, Point Reyes National Seashore, CaliforniaInstruments Point Reyes Deployment AMF Home Point Reyes Home Data Plots and Baseline Instruments Experiment Planning MASRAD Proposal Abstract and Related Campaigns Outreach Posters Climate Research at Point Reyes National Seashore (horizontal) Climate Research at Point Reyes National Seashore (vertical) News Campaign Images Instruments : Point Reyes CA, USA [ Single installation ] AERI Atmospheric Emitted Radiance Interferometer Radiometric Browse Plots Browse Data [ Single installation ] AOS Aerosol Observing System Aerosols Browse Data [ Single installation ] CCN Cloud Condensation Nuclei Particle Counter Aerosols Browse Data [ Single installation ] ECOR Eddy Correlation Flux Measurement System Surface/Subsurface Properties Browse Plots

26

ARM - Instrument - ccn  

NLE Websites -- All DOE Office Websites (Extended Search)

govInstrumentsccn govInstrumentsccn Documentation CCN : Instrument Mentor Monthly Summary (IMMS) reports CCN : Data Quality Assessment (DQA) reports ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Instrument : Cloud Condensation Nuclei Particle Counter (CCN) Instrument Categories Aerosols, Airborne Observations A cloud condensation nuclei counter consists of a flow column set up to create thermodynamically unstable controlled variable supersaturation conditions in the air sample stream and optically counts the particles that can form cloud droplets as a function of supersaturation. The CCN is part of the Aerosol Observing System (AOS). Output Datastreams aosccn : Aerosol Observing System (AOS): cloud condensation nuclei

27

ARM - Instrument Contacts  

NLE Websites -- All DOE Office Websites (Extended Search)

govInstrumentsContacts govInstrumentsContacts Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Instrument Contacts (Mentors) Instrument Name Abbreviation Contact Phone Absolute Solar Transmittance Interferometer ASTI Douglas Sisterson 630.252.5836 Aerosol Chemical Speciation Monitor ACSM Bill Behrens 631.344.2906 Yin-Nan Lee associate 631.344.3294 Stephen Springston 631.344.4477 Thomas Watson associate 631.344.4517 Aerosol Observing System AOS Bill Behrens 631.344.2906 Manvendra Dubey 505.665.3128 Brian Ermold Developer 509.375.2277 Anne Jefferson 303.497.6493 Chongai Kuang 631.344.7257 Yin-Nan Lee 631.344.3294 Arthur Sedlacek 631.344.2404 Gunnar Senum 631.344.3896 Patrick Sheridan associate 303.497.6672 Stephen Springston 631.344.4477

28

Introduction to the HPC Challenge Benchmark Suite  

Science Conference Proceedings (OSTI)

The HPC Challenge benchmark suite has been released by the DARPA HPCS program to help define the performance boundaries of future Petascale computing systems. HPC Challenge is a suite of tests that examine the performance of HPC architectures using kernels with memory access patterns more challenging than those of the High Performance Linpack (HPL) benchmark used in the Top500 list. Thus, the suite is designed to augment the Top500 list, providing benchmarks that bound the performance of many real applications as a function of memory access characteristics e.g., spatial and temporal locality, and providing a framework for including additional tests. In particular, the suite is composed of several well known computational kernels (STREAM, HPL, matrix multiply--DGEMM, parallel matrix transpose--PTRANS, FFT, RandomAccess, and bandwidth/latency tests--b{sub eff}) that attempt to span high and low spatial and temporal locality space. By design, the HPC Challenge tests are scalable with the size of data sets being a function of the largest HPL matrix for the tested system.

Luszczek, Piotr; Dongarra, Jack J.; Koester, David; Rabenseifner,Rolf; Lucas, Bob; Kepner, Jeremy; McCalpin, John; Bailey, David; Takahashi, Daisuke

2005-04-25T23:59:59.000Z

29

Exertion instruments  

E-Print Network (OSTI)

This dissertation describes the research, development and reasoning behind a family of musical instruments called Exertion Instruments. They use inline electrical generators to run a synthesizer and an amplifier while ...

Vawter, Noah (Noah Theodore)

2011-01-01T23:59:59.000Z

30

AO Core Competency Worksheet  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

AO Core Competency Worksheet AO Core Competency Worksheet 1 DOE CYBER SECURITY EBK: CORE COMPETENCY TRAINING REQUIREMENTS Key Cyber Security Role: Authorizing Official (AO) Role Definition: The AO is the Senior DOE Management Federal official with the authority to formally assume responsibility and be held fully accountable for operating an information system at an acceptable level of risk. Competency Area: Incident Management Functional Requirement: Manage Competency Definition: Refers to the knowledge and understanding of the processes and procedures required to prevent, detect, investigate, contain, eradicate, and recover from incidents that impact the organizational mission as directed by the DOE Cyber Incident Response Capability (CIRC). Behavioral Outcome: Individuals fulfilling the role of AO will have a working knowledge of policies

31

SHARP: Reactor Performance and Safety Simulation Suite  

NLE Websites -- All DOE Office Websites (Extended Search)

SHARP SHARP Argonne National Laboratory's Reactor Performance and Safety Simulation Suite SHARP could save millions in nuclear reactor design and development... The Simulation-based High-efficiency Advanced Reactor Prototyping (SHARP) suite of codes enables virtual design and engineering of nuclear plant behavior that would be impractical from a traditional experimental approach. ...by leveraging the computational power of one of the world's most powerful supercomputers. Exploiting the power of Argonne Leadership Computing Facility's near-petascale computers, researchers have developed a set of simulation tools that provide a highly detailed description of the reactor core and the nuclear plant behavior. This enables the efficient and precise design of tomorrow's safe and clean nuclear energy sources.

32

In Outer Space without a Space Suit?  

E-Print Network (OSTI)

The author proposes and investigates his old idea - a living human in space without the encumbrance of a complex space suit. Only in this condition can biological humanity seriously attempt to colonize space because all planets of Solar system (except the Earth) do not have suitable atmospheres. Aside from the issue of temperature, a suitable partial pressure of oxygen is lacking. In this case the main problem is how to satiate human blood with oxygen and delete carbonic acid gas (carbon dioxide). The proposed system would enable a person to function in outer space without a space suit and, for a long time, without food. That is useful also in the Earth for sustaining working men in an otherwise deadly atmosphere laden with lethal particulates (in case of nuclear, chemical or biological war), in underground confined spaces without fresh air, under water or a top high mountains above a height that can sustain respiration.

Alexander Bolonkin

2008-06-24T23:59:59.000Z

33

ARM - Instrument - clap  

NLE Websites -- All DOE Office Websites (Extended Search)

govInstrumentsclap govInstrumentsclap Documentation CLAP : Instrument Mentor Monthly Summary (IMMS) reports CLAP : Data Quality Assessment (DQA) reports ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Instrument : Continuous Light Absorption Photometer (CLAP) Instrument Categories Aerosols The Continuous Light Absorption Photometer (CLAP) operates on the same principle as the Particle Soot Absorption Photometer (PSAP), i.e., continuously measuring the transmission through a filter substrate as the sample air is drawn through it. The absorbing aerosol particles are collected in the filter. The CLAP is part of the Aerosol Observing System (AOS). Locations North Slope Alaska NSA X1 Browse Data External Data (satellites and others)

34

ARM - Site Instruments  

NLE Websites -- All DOE Office Websites (Extended Search)

FacilitiesAMF Deployment, Ganges Valley, FacilitiesAMF Deployment, Ganges Valley, IndiaInstruments Ganges Valley Deployment AMF Home Ganges Valley Home Data Plots and Baseline Instruments Campaign Images WRF Model Simulations for GVAX Experiment Planning GVAX Full Proposal Abstract and Related Campaigns Science Plan Outreach GVAX Backgrounder (PDF, 1.4MB) News Education Flyer (PDF, 2.1MB) AMF Poster, 2011 Images Contacts V. Rao Kotamarthi Instruments : Ganges Valley, India [ Single installation ] AERI Atmospheric Emitted Radiance Interferometer Radiometric Browse Plots Browse Data [ Single installation ] AOS Aerosol Observing System Aerosols Browse Data [ Single installation ] CCN Cloud Condensation Nuclei Particle Counter Aerosols Browse Data [ Single installation ] CLAP Continuous Light Absorption Photometer Aerosols Browse Data

35

ARM - Instrument - aeth  

NLE Websites -- All DOE Office Websites (Extended Search)

govInstrumentsaeth govInstrumentsaeth Documentation AETH : Instrument Mentor Monthly Summary (IMMS) reports AETH : Data Quality Assessment (DQA) reports ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Instrument : Aethalometer (AETH) Instrument Categories Aerosols The Aethalometer® operates on the same principle as the Particle Soot Absorption Photometer, i.e., continuously measuring the transmission of sample air through a filter substrate and the absorbing aerosol particles collected in the filter. However, it employs more wavelengths (7) and has a movable filter (tape) to allow continuous operation over long periods without requiring filter changes. The AETH is part of the Aerosol Observing System (AOS).

36

Instrumented SSH  

E-Print Network (OSTI)

LBNL-****** Instrumented SSH NERSC Center Division Lawrence05CH11231. Introduction NERSC recently undertook a projectof SSH is now running on all NERSC production systems. This

Campbell, Scott

2009-01-01T23:59:59.000Z

37

Other Instrumentation  

NLE Websites -- All DOE Office Websites (Extended Search)

(nuclear magnetic resonance) are used in studies of components for advanced batteries and fuel cells. Chemical analysis instrumentation such as high-performance liquid...

38

ARM - Instruments  

NLE Websites -- All DOE Office Websites (Extended Search)

govInstruments govInstruments Instruments Location Table Contacts Instrument Categories Select below to highlight instruments in specified categories. Aerosols Airborne Observations Atmospheric Carbon Measurements of atmospheric carbon are obtained from samples collected at the Southern Great Plains site. For more information about these measurements, see the ARM Carbon Project website. Now available: Aircraft carbon profile samples These data (and more) are freely available in the ARM Archive. The first time you visit the Archive you will need to create a new account-a relatively short form asking for contact information-you can use right away. Coming soon: Airborne continuous CO2 profile samples Atmospheric Profiling Cloud Properties Derived Quantities and Models Ocean Observations

39

Algorithm Development of the Aglite-Lidar Instrument.  

E-Print Network (OSTI)

??The Aglite system is a three-wavelength lidar plus a suite of instruments for measuring particulate emission levels near agricultural facilities. The lidar performs 3D scans… (more)

Marchant, Christian

2008-01-01T23:59:59.000Z

40

The bioenergetics of walking and running in space suits  

E-Print Network (OSTI)

Space-suited activity is critical for human spaceflight, and is synonymous with human planetary exploration. Space suits impose kinematic and kinetic boundary conditions that affect movement and locomotion, and in doing ...

Carr, Christopher E. (Christopher Edward), 1976-

2005-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "aos instrument suite" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Notices Disabled, 1401 S. Clark Street, Suite  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

13 Federal Register 13 Federal Register / Vol. 78, No. 240 / Friday, December 13, 2013 / Notices Disabled, 1401 S. Clark Street, Suite 10800, Arlington, Virginia 22202-4149. FOR FURTHER INFORMATION CONTACT: Barry S. Lineback, Telephone: (703) 603-7740, Fax: (703) 603-0655, or email CMTEFedReg@AbilityOne.gov. SUPPLEMENTARY INFORMATION: Addition On 6/28/2013 (78 FR 38952-38953), the Committee for Purchase From People Who Are Blind or Severely Disabled published notice of proposed addition to the Procurement List. After consideration of the material presented to it concerning capability of qualified nonprofit agency to provide the service and impact of the addition on the current or most recent contractors, the Committee has determined that the service listed below is suitable for procurement by the

42

Comparing non-adequate test suites using coverage criteria  

Science Conference Proceedings (OSTI)

A fundamental question in software testing research is how to compare test suites, often as a means for comparing test-generation techniques. Researchers frequently compare test suites by measuring their coverage. A coverage criterion C provides a set ... Keywords: Coverage criteria, non-adequate test suites

Milos Gligoric, Alex Groce, Chaoqiang Zhang, Rohan Sharma, Mohammad Amin Alipour, Darko Marinov

2013-07-01T23:59:59.000Z

43

HFIR Instrument Systems | ORNL Neutron Sciences  

NLE Websites -- All DOE Office Websites (Extended Search)

Click for more information about the HFIR beamline Experiment Hall Click for more information about the HFIR beamline Experiment Hall HFIR instrument layout. Click for details. Instruments at the High Flux Isotope Reactor The instrument suite at HFIR is supported by a variety of sample environments and on-site laboratories for user convenience. If you're unsure which instrument(s) would most benefit your research, or if you would like to request capabilities that you don't see here, please contact our user office. All HFIR Instrument fact sheets are also available in this single PDF document. Available to Users Beam Line Fact Sheet Instrument Name Contact CG-1 Development Beam Line Lee Robertson CG-1D PDF IMAGING - Neutron Imaging Prototype Facility Hassina Bilheux CG-2 PDF GP-SANS - General-Purpose Small-Angle Neutron Scattering Diffractometer Ken Littrell

44

Instrumented SSH  

Science Conference Proceedings (OSTI)

NERSC recently undertook a project to access and analyze Secure Shell (SSH) related data. This includes authentication data such as user names and key fingerprints, interactive session data such as keystrokes and responses, and information about noninteractive sessions such as commands executed and files transferred. Historically, this data has been inaccessible with traditional network monitoring techniques, but with a modification to the SSH daemon, this data can be passed directly to intrusion detection systems for analysis. The instrumented version of SSH is now running on all NERSC production systems. This paper describes the project, details about how SSH was instrumented, and the initial results of putting this in production.

Campbell, Scott; Campbell, Scott

2009-05-27T23:59:59.000Z

45

A Test Suite Generator For Struts Based Applications.  

E-Print Network (OSTI)

??Testing web-based enterprise applications requires the use of automated testing frameworks. The testing framework's ability to run suites of test cases through development ensures enhancements… (more)

Jackson, Gregory M.

2004-01-01T23:59:59.000Z

46

AP Instrumentation  

NLE Websites -- All DOE Office Websites (Extended Search)

Instrumentation Instrumentation Group's Instrumentation Bruker Avance NMR (400 MHz for 1H). Bruker Kappa Apex II diffractometer. Laser transient absorption facility. Laser excitation in UV and visible: Continuum Leopard SS-10-SV Nd/YAG, 60 ps pulse; Continuum Powerlite 7010 Nd/YAG, 6 ns pulse (266 nm, 355 nm, 532nm), Opotek Vibrant LD 355 II OPO, 6 ns pulse (410 - 2650 nm continuously). Detection in Uv-Vis-NIR at single wavelength with Xe lamp probe (260 - 800 nm, time resolution ca. 100 ps with biplanar tube; 400 - 1600 nm, time resolution 2-3 ns with diode detectors; 260 - 800 nm, time resolution 2-3 ns with PMT). Detection in MIR, spectral region with step-scan FTIR FT-IRS-66/V (4500 - 400 cm-1), time resolution ca. 35 ns, single wavelength with Quantum cascade lasers (2317-2197, 2235-2105, 2230-2020, 2072-1977, 1981-1873, 1903-1774, 1813-1692, 1670-1536, 1395-1306, 1258-1181 and 1135-1051 cm-1), time resolution ca. 5ns. Transient digitizers available: LeCroy HDO4034 350 MHz 12-bit; LeCroy 8620A 6 GHz; Tek DPO 4032 350 MHz; Tek DPO 4054B 500 MHz.

47

On test suite composition and cost-effective regression testing  

E-Print Network (OSTI)

Regression testing is an expensive testing process used to re-validate software as it evolves. Various methodologies for improving regression testing processes have been explored, but the cost-effectiveness of these methodologies has been shown to vary with characteristics of regression test suites. One such characteristic involves the way in which test inputs are composed into test cases within a test suite. This article reports the results of controlled experiments examining the effects of two factors in test suite composition — test suite granularity and test input grouping — on the costs and benefits of several regression-testing-related methodologies: retest-all, regression test selection, test suite reduction, and test case prioritization. These experiments consider the application of several specific techniques, from each of these methodologies, across ten releases each of two substantial software systems, using seven levels of test suite granularity and two types of test input grouping. The effects of granularity, technique, and grouping on the cost and fault-detection effectiveness of regression testing under the given methodologies are analyzed. This analysis shows that test suite granularity significantly affects several cost-benefit factors for the methodologies considered, while test input grouping has limited effects. Further, the results expose essential tradeoffs affecting the relationship between test suite design and regression testing cost-effectiveness, with several implications for practice. 1

Gregg Rothermel; Sebastian Elbaum; Alexey Malishevsky; Praveen Kallakuri

2004-01-01T23:59:59.000Z

48

INSTRUMENTATION FOR ENVIRONMENTAL MONITORING  

E-Print Network (OSTI)

MO, June 4-7, 1979 INSTRUMENTATION FOR ENVIRONMENTALContract W-7405-ENG-48 INSTRUMENTATION FOR ENVIRONMENTAL0.003 mrem C^ Figure 5 INSTRUMENTATION: Too often analytical

McLaughlin, R.D.

2010-01-01T23:59:59.000Z

49

Improving the effectiveness of test suite reduction for user-session-based testing of web applications  

Science Conference Proceedings (OSTI)

Context: Test suite reduction is the problem of creating and executing a set of test cases that are smaller in size but equivalent in effectiveness to an original test suite. However, reduced suites can still be large and executing all the tests in a ... Keywords: Ordering reduced suites, Test suite prioritization, Test suite reduction, User-session-based testing, Web application testing

Sreedevi Sampath; Renée C. Bryce

2012-07-01T23:59:59.000Z

50

PREVENTIVE CONSERVATION: A CONCEPT SUITED TO THE CONSERVATION OF EARTHEN  

E-Print Network (OSTI)

PREVENTIVE CONSERVATION: A CONCEPT SUITED TO THE CONSERVATION OF EARTHEN ARCHITECTURAL HERITAGE and Construction Key words: Preventive conservation, traditional conservation practices, risk reduction, heritage management Abstract The concept of "preventive conservation" is relatively old as it has already been

Recanati, Catherine

51

Building Energy Software Tools Directory: SunAngle Professional Suite  

NLE Websites -- All DOE Office Websites (Extended Search)

SunAngle Professional Suite SunAngle Professional Suite SunAngle Professional logo. More sophisticated, robust, and well-documented version of SunAngle for people interested in better understanding the calculation methodology or developing their own solar angle calculation tools. The Professional Suite includes well-documented HTML/JavaScript and Microsoft Excel versions of SunAngle, plus a detailed technical manual explaining how to perform all of the underlying calculations. Screen Shots Keywords sun angle, solar calculator Validation/Testing Outputs of the SunAngle Professional Suite were compared to published standard sources of solar angle data; this is documented in the SunAngle Technical Manual. Expertise Required Knowledge of HTML, JavaScript, and/or Microsoft Excel, if the user wishes

52

The Extreme Benchmark Suite : measuring high-performance embedded systems  

E-Print Network (OSTI)

The Extreme Benchmark Suite (XBS) is designed to support performance measurement of highly parallel "extreme" processors, many of which are designed to replace custom hardware implementations. XBS is designed to avoid many ...

Gerding, Steven (Steven Bradley)

2005-01-01T23:59:59.000Z

53

Sensors, Instrumentation Systems  

NLE Websites -- All DOE Office Websites (Extended Search)

Sensors, Instrumentation Systems science-innovationassetsimagesicon-science.jpg Sensors, Instrumentation Systems National security depends on science and technology. The...

54

NASA investments in in situ technologies and instruments for sample return missions  

Science Conference Proceedings (OSTI)

Instrument technologies for the in situ exploration of planets are of particular interest for future NASA planetary science missions.12 In situ analysis is complicated because answering specific science questions requires technologies suited to specific ...

Janice L. Buckner; Lisa May

2011-03-01T23:59:59.000Z

55

Building Energy Software Tools Directory: Right-Suite Residential for  

NLE Websites -- All DOE Office Websites (Extended Search)

Right-Suite Residential for Windows Right-Suite Residential for Windows Right-Suite Residential for Windows logo. All-in-one HVAC software performs residential loads calculations, duct sizing, energy analysis, equipment selection, cost comparison calculations, and geothermal loop design. Also allows you to design your own custom proposals. Used for system design, for sales representation, and for quotation preparations. Buy only what you need. Unused functions are shipped as demos, so the program can grow with your needs. Keywords residential loads calculations, duct sizing, energy analysis, HVAC equipment selection, system design Validation/Testing N/A Expertise Required Knowledge of general HVAC concepts. High level of computer literacy not required. Users Over 10,000 users of Right-J loads.

56

Selecting The Optimal Logging Suite For Geothermal Reservoir Evaluation-  

Open Energy Info (EERE)

Selecting The Optimal Logging Suite For Geothermal Reservoir Evaluation- Selecting The Optimal Logging Suite For Geothermal Reservoir Evaluation- Results From The Alum 25-29 Well, Nevada Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Conference Paper: Selecting The Optimal Logging Suite For Geothermal Reservoir Evaluation- Results From The Alum 25-29 Well, Nevada Details Activities (6) Areas (1) Regions (0) Abstract: This paper presents the results of analysis of a state of the art set of wireline petrophysical and wellbore image logs recorded in the Alum 25-29 well, southwestern Nevada. The Alum well penetrated nearly 2000 ft (610 m) of volcano-clastic rocks and more than 1000 ft of basement, separated from the sediments by a shallowly dipping detachment fault. The logs were acquired both to characterize the site and also to select the

57

Low activated incore instrument  

DOE Patents (OSTI)

Instrumentation for nuclear reactor head-mounted incore instrumentation systems fabricated of low nuclear cross section materials (i.e., zirconium or titanium). The instrumentation emits less radiation than that fabricated of conventional materials.

Ekeroth, Douglas E. (Delmont, PA)

1994-01-01T23:59:59.000Z

58

Low activated incore instrument  

DOE Patents (OSTI)

Instrumentation is described for nuclear reactor head-mounted incore instrumentation systems fabricated of low nuclear cross section materials (i.e., zirconium or titanium). The instrumentation emits less radiation than that fabricated of conventional materials. 9 figures.

Ekeroth, D.E.

1994-04-19T23:59:59.000Z

59

ARM - Instrument - sonicwind  

NLE Websites -- All DOE Office Websites (Extended Search)

you Send us a note below or call us at 1-888-ARM-DATA. Send Instrument : ultrasonic wind sensor (SONICWIND) Instrument Categories Surface Meteorology Output Datastreams...

60

ARM - Campaign Instrument - ecmwf  

NLE Websites -- All DOE Office Websites (Extended Search)

1-888-ARM-DATA. Send Campaign Instrument : European Centre for Medium Range Weather Forecasts Model Data (ECMWF) Instrument Categories Derived Quantities and Models Campaigns...

Note: This page contains sample records for the topic "aos instrument suite" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

ARM - Instrument - ecmwf  

NLE Websites -- All DOE Office Websites (Extended Search)

call us at 1-888-ARM-DATA. Send Instrument : European Centre for Medium Range Weather Forecasts Model Data (ECMWF) Instrument Categories Derived Quantities and Models General...

62

ARM - Instrument - 50rwp  

NLE Websites -- All DOE Office Websites (Extended Search)

govInstruments50rwp Documentation 50RWP : Handbook 50RWP : Instrument Mentor Monthly Summary (IMMS) reports 50RWP : Data Quality Assessment (DQA) reports ARM Data Discovery Browse...

63

ARM - Campaign Instrument - pcasp  

NLE Websites -- All DOE Office Websites (Extended Search)

you Send us a note below or call us at 1-888-ARM-DATA. Send Campaign Instrument : Passive Cavity Aerosol Spectrometer (PCASP) Instrument Categories Aerosols, Airborne...

64

ARM - Campaign Instrument - semsamp  

NLE Websites -- All DOE Office Websites (Extended Search)

Send us a note below or call us at 1-888-ARM-DATA. Send Campaign Instrument : Scanning Electron Microscope Sampler (SEMSAMP) Instrument Categories Aerosols Campaigns...

65

ARM - Site Instruments  

NLE Websites -- All DOE Office Websites (Extended Search)

FacilitiesAMF Deployment, Black Forest, GermanyInstruments Black Forest Deployment AMF Home Black Forest Home Data Plots and Baseline Instruments CERA COPS Data University of...

66

A Test Suite for GCMs: An Intercomparison of 11  

E-Print Network (OSTI)

A Test Suite for GCMs: An Intercomparison of 11 Dynamical Cores Christiane Jablonowski1, PeterSandia National Laboratories PDEs on the Sphere Workshop, Santa Fe Apr/28/2009 #12;Motivation · Test standardized & easy-to-use analysis techniques · Idea: Establish a collection of test cases that finds broad

Jablonowski, Christiane

67

DYNA3D/ParaDyn Regression Test Suite Inventory  

Science Conference Proceedings (OSTI)

The following table constitutes an initial assessment of feature coverage across the regression test suite used for DYNA3D and ParaDyn. It documents the regression test suite at the time of production release 10.1 in September 2010. The columns of the table represent groupings of functionalities, e.g., material models. Each problem in the test suite is represented by a row in the table. All features exercised by the problem are denoted by a check mark in the corresponding column. The definition of ''feature'' has not been subdivided to its smallest unit of user input, e.g., algorithmic parameters specific to a particular type of contact surface. This represents a judgment to provide code developers and users a reasonable impression of feature coverage without expanding the width of the table by several multiples. All regression testing is run in parallel, typically with eight processors. Many are strictly regression tests acting as a check that the codes continue to produce adequately repeatable results as development unfolds, compilers change and platforms are replaced. A subset of the tests represents true verification problems that have been checked against analytical or other benchmark solutions. Users are welcomed to submit documented problems for inclusion in the test suite, especially if they are heavily exercising, and dependent upon, features that are currently underrepresented.

Lin, J I

2011-01-25T23:59:59.000Z

68

Polysemy and sense proximity in the Senseval-2 test suite  

Science Conference Proceedings (OSTI)

We report on an empirical study of sense relations in the Senseval-2 test suite. We apply and extend the method described in (Resnik and Yarowsky, 1999), estimating proximity of sense pairs from the evidence collected from native-speaker translations ...

Irina Chugur; Julio Gonzalo; Felisa Verdejo

2002-07-01T23:59:59.000Z

69

AOS Solar Inc | Open Energy Information  

Open Energy Info (EERE)

AOS Solar Inc Jump to: navigation, search Name AOS Solar Inc Product Manufacturer of thin-film silicon-on-glass. References AOS Solar Inc1 LinkedIn Connections CrunchBase...

70

ARM - Site Instruments  

NLE Websites -- All DOE Office Websites (Extended Search)

: Eastern North Atlantic Single installation AOS Aerosol Observing System Aerosols Single installation ASSIST Atmospheric Sounder Spectrometer for Infrared Spectral...

71

ARM - Site Instruments  

NLE Websites -- All DOE Office Websites (Extended Search)

: Steamboat Springs CO, USA Single installation AOS Aerosol Observing System Aerosols Browse Data Single installation AOSMET Meteorological Measurements associated...

72

ARM - Site Instruments  

NLE Websites -- All DOE Office Websites (Extended Search)

Investigation of Clouds) - AMF2 Single installation AOS Aerosol Observing System Aerosols Browse Data Single installation AOSMET Meteorological Measurements associated...

73

Radiation Detection Instruments  

Science Conference Proceedings (OSTI)

Directory of Accredited Laboratories. Radiation Detection Instruments. In 2005, the Department of Homeland Security requested ...

2013-09-06T23:59:59.000Z

74

ARM - Site Instruments  

NLE Websites -- All DOE Office Websites (Extended Search)

FacilityInstruments FacilityInstruments AAF Information Proposal Process Science (PDF) Baseline Instruments Campaign Instruments Instrumentation Workshop 2008 AAF Fact Sheet G-1 Fact Sheet Images Field Campaigns AAF Campaigns 2007 - UAV Campaigns 1993 - 2006, 2015 Other Aircraft Campaigns 1993 - 2010 AAF Contacts Rickey Petty DOE AAF Program Director Beat Schmid Technical Director AAF Baseline Instruments The following instruments represent available capabilities. The needs of each field campaign will be assessed and additional instruments may be added upon request. For a list of past campaign instruments and their data, see the Airborne Observations instruments. Examples of cabin configurations for the G-1 from past and upcoming campaigns are also available. Payload Example from 2010 Payload Example from 2010

75

The Extreme Benchmark Suite: Measuring High-Performance Embedded Systems  

E-Print Network (OSTI)

The Extreme Benchmark Suite (XBS) is designed to support performance measurement of highly parallel “extreme ” processors, many of which are designed to replace custom hardware implementations. XBS is designed to avoid many of the problems that occur when using existing benchmark suites with nonstandard and experimental architectures. In particular, XBS is intended to provide a fair comparison of a wide range of architectures, from general-purpose processors to hard-wired ASIC implementations. XBS has a clean modular structure to reduce porting effort, and is designed to be usable with slow cycle-accurate simulators. This work presents the motivation for the creation of XBS and describes in detail the XBS framework. Several benchmarks implemented with this framework are discussed, and these benchmarks are used to compare a standard platform, an experimental architecture, and custom

Steven Gerding; Krste Asanovi?

2005-01-01T23:59:59.000Z

76

ARM's Aerosol Observing System (AOS) Data  

DOE Data Explorer (OSTI)

The aerosol observing system (AOS) is the primary Atmospheric Radiation Measurement (ARM) platform for in situ aerosol measurements at the surface. The principal measurements are those of the aerosol absorption and scattering coefficients as a function of the particle size and radiation wavelength. Additional measurements include those of the particle number concentration, size distribution, hygroscopic growth, and inorganic chemical composition. The AOS measures aerosol optical properties to better understand how particles interact with solar radiation and influence the earth's radiation balance. The measurements are useful for calculating parameters used in radiative forcing calculations such as the aerosol single scattering albedo, asymmetry parameter, mass scattering efficiency, and hygroscopic growth. [Copied from http://www.arm.gov/instruments/aos]

The ARM Archive at Oak Ridge National Laboratory holds aerosol data from the AOS for two of the permanent ARM sites, North Slope Alaska (NSA) and Southern Great Plains (SGP), as well as from mobile facilities used during specific field campaigns. The AOS has collected data since 1995.

77

Revel8or: Model Driven Capacity Planning Tool Suite  

SciTech Connect

Designing complex multi-tier applications that must meet strict performance requirements is a challenging software engineering problem. Ideally, the application architect could derive accurate performance predictions early in the project life-cycle, leveraging initial application design-level models and a description of the target software and hardware platforms. To this end, we have developed a capacity planning tool suite for component-based applications, called Revel8tor. The tool adheres to the model driven development paradigm and supports benchmarking and performance prediction for J2EE, .Net and Web services platforms. The suite is composed of three different tools: MDAPerf, MDABench and DSLBench. MDAPerf allows annotation of design diagrams and derives performance analysis models. MDABench allows a customized benchmark application to be modeled in the UML 2.0 Testing Profile and automatically generates a deployable application, with measurement automatically conducted. DSLBench allows the same benchmark modeling and generation to be conducted using a simple performance engineering Domain Specific Language (DSL) in Microsoft Visual Studio. DSLBench integrates with Visual Studio and reuses its load testing infrastructure. Together, the tool suite can assist capacity planning across platforms in an automated fashion.

Zhu, Liming; Liu, Yan; Bui, Ngoc B.; Gorton, Ian

2007-05-31T23:59:59.000Z

78

ARM - Recovery Act Instruments  

NLE Websites -- All DOE Office Websites (Extended Search)

ActRecovery Act Instruments ActRecovery Act Instruments Recovery Act Logo Subscribe FAQs Recovery Act Instruments Recovery Act Fact Sheet March 2010 Poster (PDF, 10MB) External Resources Recovery Act - Federal Recovery Act - DOE Recovery Act - ANL Recovery Act - BNL Recovery Act - LANL Recovery Act - PNNL Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Recovery Act Instruments These pages provide a breakdown of the new instruments planned for installation among the permanent and mobile ARM sites. In addition, several instruments will be purchased for use throughout the facility and deployed as needed. These are considered "facility spares" and are included in the table below. View All | Hide All ARM Aerial Facility Instrument Title Instrument Mentor Measurement Group Measurements

79

ARM - Campaign Instrument - twrmr  

NLE Websites -- All DOE Office Websites (Extended Search)

from you Send us a note below or call us at 1-888-ARM-DATA. Send Campaign Instrument : Tower Water-Vapor Mixing Ratio (TWRMR) Instrument Categories Atmospheric Profiling Campaigns...

80

ARM - Campaign Instrument - towerflux  

NLE Websites -- All DOE Office Websites (Extended Search)

from you Send us a note below or call us at 1-888-ARM-DATA. Send Campaign Instrument : Tower Flux Measurements (TOWERFLUX) Instrument Categories Radiometric, Surface Meteorology...

Note: This page contains sample records for the topic "aos instrument suite" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

ARM - Campaign Instrument - nawx  

NLE Websites -- All DOE Office Websites (Extended Search)

from you Send us a note below or call us at 1-888-ARM-DATA. Send Campaign Instrument : NRC Airborne W and X Band Radar (NAWX) Instrument Categories Cloud Properties, Airborne...

82

ARM - Campaign Instrument - cmh  

NLE Websites -- All DOE Office Websites (Extended Search)

from you Send us a note below or call us at 1-888-ARM-DATA. Send Campaign Instrument : Chilled Mirror Hygrometer (CMH) Instrument Categories Surface Meteorology Campaigns 1995...

83

ARM - Instrument - disdrometer  

NLE Websites -- All DOE Office Websites (Extended Search)

govInstrumentsdisdrometer Documentation DISDROMETER : Handbook DISDROMETER : Instrument Mentor Monthly Summary (IMMS) reports DISDROMETER : Data Quality Assessment (DQA) reports...

84

Integration of APECS and VE-Suite for Data Overlay  

Science Conference Proceedings (OSTI)

In the design of advanced power generation facilities, process simulation tools are being utilized to model plant behavior and quickly analyze results. While such tools enable investigation of crucial aspects of plant design, typical commercial process simulators still do not explore some plant design information, including high-fidelity data from computational fluid dynamics (CFD) models of complex thermal and fluid flow phenomena, economics data used for policy decisions, operational data after the plant is constructed, and as-built information for use in as-designed models. Software tools must be created that allow disparate sources of information to be integrated for facilitating accurate and effective plant design. At the Department of Energy’s (DOE) National Energy Technology Laboratory (NETL), the Advanced Process Engineering Co-Simulator (APECS) has been developed as an integrated software suite that combines process simulation (e.g., Aspen Plus®) and high-fidelity equipment simulation (e.g., FLUENT®). In this paper, the integration of the high-fidelity CFD data with overall process data in a virtual power simulation environment will be described. More specifically, we will highlight VE-Suite, an open-source virtual engineering (VE) software toolkit, and its support of Aspen Plus® Hierarchy blocks via the VE-AspenUnit.

McCorkel, Doug (Iowa State University, Ames, IA); Bivins, Gerrick (Iowa State University, Ames, IA); Jordan, Terry; Bryden, Mark (Iowa State University, Ames, IA); Zitney, S.E.; Widmann, John (ANSYS, Lebanon, NH); Osawe, Maxwell

2008-06-01T23:59:59.000Z

85

Spherical Harmonic Solutions to the 3D Kobayashi Benchmark Suite  

SciTech Connect

Spherical harmonic solutions of order 5, 9 and 21 on spatial grids containing up to 3.3 million cells are presented for the Kobayashi benchmark suite. This suite of three problems with simple geometry of pure absorber with large void region was proposed by Professor Kobayashi at an OECD/NEA meeting in 1996. Each of the three problems contains a source, a void and a shield region. Problem 1 can best be described as a box in a box problem, where a source region is surrounded by a square void region which itself is embedded in a square shield region. Problems 2 and 3 represent a shield with a void duct. Problem 2 having a straight and problem 3 a dog leg shaped duct. A pure absorber and a 50% scattering case are considered for each of the three problems. The solutions have been obtained with Ardra, a scalable, parallel neutron transport code developed at Lawrence Livermore National Laboratory (LLNL). The Ardra code takes advantage of a two-level parallelization strategy, which combines message passing between processing nodes and thread based parallelism amongst processors on each node. All calculations were performed on the IBM ASCI Blue-Pacific computer at LLNL.

Brown, P.N.; Chang, B.; Hanebutte, U.R.

1999-12-29T23:59:59.000Z

86

PHAST (PHAGE ASSEMBLY SUITE AND TUTORIAL): A WEB-BASED GENOME ASSEMBLY TEACHING TOOL  

E-Print Network (OSTI)

PHAST (PHAGE ASSEMBLY SUITE AND TUTORIAL): A WEB-BASED GENOME as genome assembly. PHAST (Phage Assembly Suite and Tutorial) is an online set small phage genomes of their own. With PHAST, entry-level biology students learn

Campbell, A. Malcolm

87

Robotic Joint Torque Testing: A Critical Tool in the Development of Pressure Suit Mobility Elements  

E-Print Network (OSTI)

Pressure suits allow pilots and astronauts to survive in extreme environments at the edge of Earth’s atmosphere and in the vacuum of space. One obstacle that pilots and astronauts face is that gas-pressurized suits stiffen ...

Meyen, Forrest Edward

88

Space suit simulator for partial gravity extravehicular activity experimentation and training  

E-Print Network (OSTI)

During human space exploration, mobility is extremely limited when working inside a pressurized space suit. Astronauts perform extensive training on Earth to become accustomed to space suit-imposed high joint torques and ...

Gilkey, Andrea L. (Andrea Lynn)

2012-01-01T23:59:59.000Z

89

User Guide for the STAYSL PNNL Suite of Software Tools  

SciTech Connect

The STAYSL PNNL software suite provides a set of tools for working with neutron activation rates measured in a nuclear fission reactor, an accelerator-based neutron source, or any neutron field to determine the neutron flux spectrum through a generalized least-squares approach. This process is referred to as neutron spectral adjustment since the preferred approach is to use measured data to adjust neutron spectra provided by neutron physics calculations. The input data consist of the reaction rates based on measured activities, an initial estimate of the neutron flux spectrum, neutron activation cross sections and their associated uncertainties (covariances), and relevant correction factors. The output consists of the adjusted neutron flux spectrum and associated covariance matrix, which is useful for neutron dosimetry and radiation damage calculations.

Greenwood, Lawrence R.; Johnson, Christian D.

2013-02-27T23:59:59.000Z

90

MDM Project: Analysis of the Micromechanics Damage Model Suite  

E-Print Network (OSTI)

This report extends a previous study of core algorithms and portability considerations associated with the Micromechanics Damage Model computer software developed by the AFRL Materials Directorate at Wright-Patterson Air Force Base. 1 The MDM analysis suite is comprised of four fracture mechanics codes used to establish design criteria for newly developed composite materials, particularly for brittle, heat-resistant composites associated with the fabrication of turbine blades. The MDM codes are based on a semi-analytical approach in which single coated fibers and the surrounding composite material are represented as a nested set of concentric shells (Fig. 1). Stresses and displacements at prescribed points along the length of the cylinder are determined by evaluation of a polynomial function. Numerically challenging conditions arise during the construction of this function. The calculation of matrix exponentials in terms of the full spectrum of eigenvalues associated with the pri...

D. C. O' neal; R. Luczak; N. J. Pagano; H. W. Brown Iii; G. P. Tandon

2000-01-01T23:59:59.000Z

91

Creating suites of models with system entity structure: global warming example  

Science Conference Proceedings (OSTI)

We describe how to develop a suite of models in the MS4 Modeling Environment. The approach employs the operation of merging of System Entity Structures supported by the environment. After construction, the suite of models can be hosted on Model Store, ... Keywords: component-based modeling, suite of models, system entity structure, systems of systems

Bernard P. Zeigler, Chungman Seo, Robert Coop, Doohwan Kim

2013-04-01T23:59:59.000Z

92

ARM - Site Instruments  

NLE Websites -- All DOE Office Websites (Extended Search)

PacificInstruments PacificInstruments TWP Related Links Facilities and Instruments Manus Island Nauru Island Darwin, AUS ES&H Guidance Statement Operations Science Field Campaigns Year of Tropical Convection Visiting the Site TWP Fact Sheet Images Information for Guest Scientists Contacts Instruments : Tropical Western Pacific [ Installed at 3 facilities ] AERI Atmospheric Emitted Radiance Interferometer Radiometric Browse Plots Browse Data [ Installed at 2 facilities ] CSAPR C-Band ARM Precipitation Radar Cloud Properties Browse Data [ Installed at 3 facilities ] CSPHOT Cimel Sunphotometer Aerosols, Radiometric Browse Data [ Single installation ] DISDROMETER Impact Disdrometer Surface Meteorology Browse Plots Browse Data [ Single installation ] DL Doppler Lidar Cloud Properties Browse Data [ Installed at 3 facilities ]

93

ARM - Site Instruments  

NLE Websites -- All DOE Office Websites (Extended Search)

Darwin SiteInstruments Darwin SiteInstruments TWP Related Links Facilities and Instruments Manus Island Nauru Island Darwin, AUS ES&H Guidance Statement Operations Science Field Campaigns Year of Tropical Convection Visiting the Site TWP Fact Sheet Images Information for Guest Scientists Contacts Instruments : Central Facility, Darwin, Australia [ Single installation ] AERI Atmospheric Emitted Radiance Interferometer Radiometric Browse Plots Browse Data [ Single installation ] CSPHOT Cimel Sunphotometer Aerosols, Radiometric Browse Data [ Single installation ] DISDROMETER Impact Disdrometer Surface Meteorology Browse Plots Browse Data [ Single installation ] DL Doppler Lidar Cloud Properties Browse Data [ Single installation ] GNDRAD Ground Radiometers on Stand for Upwelling Radiation Radiometric Browse Plots

94

HFBS Instrument Homepage  

Science Conference Proceedings (OSTI)

... The NCNR backscattering spectrometer is one of the highest intensity instruments of its kind. It enables very high energy resolution studies of the ...

2011-08-23T23:59:59.000Z

95

ARM - Instrument - blc  

NLE Websites -- All DOE Office Websites (Extended Search)

govInstrumentsblc Documentation BLC : Handbook BLC : Instrument Mentor Monthly Summary (IMMS) reports BLC : Data Quality Assessment (DQA) reports ARM Data Discovery Browse Data...

96

ARM - Instrument - gvrp  

NLE Websites -- All DOE Office Websites (Extended Search)

govInstrumentsgvrp Documentation GVRP : Handbook GVRP : Instrument Mentor Monthly Summary (IMMS) reports GVRP : Data Quality Assessment (DQA) reports ARM Data Discovery Browse Data...

97

ARM - Instrument - tdma  

NLE Websites -- All DOE Office Websites (Extended Search)

govInstrumentstdma Documentation TDMA : Handbook TDMA : Instrument Mentor Monthly Summary (IMMS) reports TDMA : Data Quality Assessment (DQA) reports ARM Data Discovery Browse Data...

98

ARM - Instrument - csphot  

NLE Websites -- All DOE Office Websites (Extended Search)

govInstrumentscsphot Documentation CSPHOT : Handbook CSPHOT : Instrument Mentor Monthly Summary (IMMS) reports CSPHOT : Data Quality Assessment (DQA) reports ARM Data Discovery...

99

ARM - Instrument - co  

NLE Websites -- All DOE Office Websites (Extended Search)

govInstrumentsco Documentation CO : Handbook CO : Instrument Mentor Monthly Summary (IMMS) reports CO : Data Quality Assessment (DQA) reports ARM Data Discovery Browse Data...

100

ARM - Instrument - asti  

NLE Websites -- All DOE Office Websites (Extended Search)

govInstrumentsasti Documentation ASTI : Handbook ASTI : Instrument Mentor Monthly Summary (IMMS) reports ASTI : Data Quality Assessment (DQA) reports ARM Data Discovery Browse Data...

Note: This page contains sample records for the topic "aos instrument suite" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

ARM - Instrument - surthref  

NLE Websites -- All DOE Office Websites (Extended Search)

govInstrumentssurthref Documentation SURTHREF : Handbook SURTHREF : Instrument Mentor Monthly Summary (IMMS) reports SURTHREF : Data Quality Assessment (DQA) reports ARM Data...

102

ARM - Instrument - swats  

NLE Websites -- All DOE Office Websites (Extended Search)

govInstrumentsswats Documentation SWATS : Handbook SWATS : Algorithms (PDF) SWATS : Instrument Mentor Monthly Summary (IMMS) reports SWATS : Data Quality Assessment (DQA) reports...

103

ARM - Instrument - smet  

NLE Websites -- All DOE Office Websites (Extended Search)

govInstrumentssmet Documentation SMET : Handbook SMET : Instrument Mentor Monthly Summary (IMMS) reports SMET : Data Quality Assessment (DQA) reports ARM Data Discovery Browse Data...

104

ARM - Instrument - kazr  

NLE Websites -- All DOE Office Websites (Extended Search)

govInstrumentskazr Documentation KAZR : Handbook KAZR : Instrument Mentor Monthly Summary (IMMS) reports KAZR : Data Quality Assessment (DQA) reports ARM Data Discovery Browse Data...

105

ARM - Instrument - wsi  

NLE Websites -- All DOE Office Websites (Extended Search)

govInstrumentswsi Documentation WSI : Handbook WSI : Instrument Mentor Monthly Summary (IMMS) reports WSI : Data Quality Assessment (DQA) reports ARM Data Discovery Browse Data...

106

ARM - Instrument - ebbr  

NLE Websites -- All DOE Office Websites (Extended Search)

govInstrumentsebbr Documentation EBBR : Handbook EBBR : Instrument Mentor Monthly Summary (IMMS) reports EBBR : Data Quality Assessment (DQA) reports ARM Data Discovery Browse Data...

107

ARM - Instrument - xsapr  

NLE Websites -- All DOE Office Websites (Extended Search)

govInstrumentsxsapr Documentation XSAPR : Handbook XSAPR : Instrument Mentor Monthly Summary (IMMS) reports XSAPR : Data Quality Assessment (DQA) reports ARM Data Discovery Browse...

108

ARM - Instrument - twr  

NLE Websites -- All DOE Office Websites (Extended Search)

are listed in section 7, Instrument Details, although only the TemperatureRelative HumidityVapor Pressure (TRHVP) measurements made on the SGP CF tower are described in...

109

Instrumentation of Gait Analysis.  

E-Print Network (OSTI)

?? This master’s thesis project “Instrumentation of Gait Analysis” was carried out at and funded by Integrum AB, Gothenburg, Sweden. Force analysis is critical during… (more)

Ma, Weizen

2010-01-01T23:59:59.000Z

110

ARM - Site Instruments  

NLE Websites -- All DOE Office Websites (Extended Search)

Manacapuru, Brazil Instruments Manacapuru Deployment AMF Home Manacapuru Home GOAMAZON Home Experiment Planning Abstract and Related Campaigns Science Plan (PDF, 1.4MB) Deployment...

111

Instrument performance evaluation  

Science Conference Proceedings (OSTI)

Deficiencies exist in both the performance and the quality of health physics instruments. Recognizing the implications of such deficiencies for the protection of workers and the public, in the early 1980s the DOE and the NRC encouraged the development of a performance standard and established a program to test a series of instruments against criteria in the standard. The purpose of the testing was to establish the practicality of the criteria in the standard, to determine the performance of a cross section of available instruments, and to establish a testing capability. Over 100 instruments were tested, resulting in a practical standard and an understanding of the deficiencies in available instruments. In parallel with the instrument testing, a value-impact study clearly established the benefits of implementing a formal testing program. An ad hoc committee also met several times to establish recommendations for the voluntary implementation of a testing program based on the studies and the performance standard. For several reasons, a formal program did not materialize. Ongoing tests and studies have supported the development of specific instruments and have helped specific clients understand the performance of their instruments. The purpose of this presentation is to trace the history of instrument testing to date and suggest the benefits of a centralized formal program.

Swinth, K.L.

1993-03-01T23:59:59.000Z

112

Eddy Current Instruments  

Science Conference Proceedings (OSTI)

Table 2   Types and capabilities of commercially available eddy current instruments...measurement of four variables, analog

113

New Optical Sensor Suite for Ultrahigh Temperature Fossil Fuel Application  

DOE Green Energy (OSTI)

Accomplishments of a program to develop and demonstrate photonic sensor technology for the instrumentation of advanced powerplants and solid oxide fuel cells are described. The goal of this project is the research and development of advanced, robust photonic sensors based on improved sapphire optical waveguides, and the identification and demonstration of applications of the new sensors in advanced fossil fuel power plants, where the new technology will contribute to improvements in process control and monitoring.

John Coggin; Tom Flynn; Jonas Ivasauskas; Daniel Kominsky; Carrie Kozikowski; Russell May; Michael Miller; Tony Peng; Gary Pickrell; Raymond Rumpf; Kelly Stinson-Bagby; Dan Thorsen; Rena Wilson

2007-12-31T23:59:59.000Z

114

ARM - Instrument - sp2  

NLE Websites -- All DOE Office Websites (Extended Search)

aerosol particles by laser-induced incandescence down to concentrations as low as 10 ngm3. The SP2 is part of the Aerosol Observing System (AOS). See Also Contact(s) Stephen...

115

Intensity Frontier Instrumentation  

E-Print Network (OSTI)

This report summarizes findings of the 2013 Snowmass Community Summer Study Instrumentation Frontier's subgroup on the Intensity Frontier. This report is directed at identifying instrumentation R&D needed to support particle physics research over the coming decades at the Intensity Frontier.

S. H. Kettell; R. A. Rameika; R. S. Tschirhart

2013-09-26T23:59:59.000Z

116

Instruments | Neutron Science | ORNL  

NLE Websites -- All DOE Office Websites (Extended Search)

NScD Careers NScD Careers Supporting Organizations Neutron Science Home | Science & Discovery | Neutron Science | Instruments SHARE Instruments at SNS and HFIR SNS Instrument Name HFIR Instrument Name 1B NOMAD - Nanoscale-Ordered Materials Diffractometer CG-1 Development Beam Line 2 BASIS - Backscattering Spectrometer CG-1D IMAGING - Neutron Imaging Prototype Facility 3 SNAP - Spallation Neutrons and Pressure Diffractometer CG-2 GP-SANS - General-Purpose Small-Angle Neutron Scattering Diffractometer 4A MR - Magnetism Reflectometer CG-3 Bio-SANS - Biological Small-Angle Neutron Scattering Instrument 4B LR - Liquids Reflectometer CG-4C CTAX - Cold Neutron Triple-Axis Spectrometer 5 CNCS - Cold Neutron Chopper Spectrometer HB-1 PTAX - Polarized Triple-Axis Spectrometer

117

ARM - Instrument - mettwr  

NLE Websites -- All DOE Office Websites (Extended Search)

govInstrumentsmettwr govInstrumentsmettwr Documentation METTWR : Handbook METTWR : Instrument Mentor Monthly Summary (IMMS) reports METTWR : Data Quality Assessment (DQA) reports ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Instrument : Surface and Tower Meteorological Instrumentation at NSA (METTWR) Instrument Categories Surface Meteorology Picture of the Surface meteorological measurements from tower (METTWR) Picture of the Surface meteorological measurements from tower (METTWR) General Overview Surface and Tower Meteorological Instrumentation at NSA (METTWR) use mainly conventional in situ sensors to measure wind speed, wind direction, air temperature, dew point, and humidity mounted on either a 10-m or a 40-m

118

Sensors, Electronics & Instrumentation  

NLE Websites -- All DOE Office Websites (Extended Search)

Sensors, Electronics & Instrumentation Sensors, Electronics & Instrumentation Sensors, Electronics & Instrumentation Express Licensing Acoustic Concentration Of Particles In Fluid Flow Express Licensing Apparatus And Method For Hydrogen And Oxygen Mass Spectrometry Of The Terrestrial Magnetosphere Express Licensing Apparatus And Method For Temperature Correction And Expanded Count Rate Of Inorganic Scintillation Detectors Express Licensing Composition and method for removing photoresist materials from electronic components Express Licensing Corrosion Test Cell For Bipolar Plates Express Licensing Cylindrical Acoustic Levitator/Concentrator Negotiable Licensing Electrochemical Apparatus with Disposable and Modifiable Parts Express Licensing Foil electron multiplier Express Licensing Hydrogen Sensor

119

ARM - Site Instruments  

NLE Websites -- All DOE Office Websites (Extended Search)

Oliktok Point, Oliktok Point, AlaskaInstruments Oliktok Deployment AMF Home Oliktok Home Deployment Operations Baseline Instruments and Data Plots at the Archive Outreach News & Press New Sites Fact Sheet (PDF, 1.6MB) Images Contacts Fred Helsel, AMF Operations Lynne Roeder, Media Contact Hans Verlinde, Principal Investigator Instruments : Oliktok Point, Alaska [ Single installation ] AERI Atmospheric Emitted Radiance Interferometer Radiometric Not Online [ Single installation ] CSAPR C-Band ARM Precipitation Radar Cloud Properties Not Online [ Single installation ] CSPHOT Cimel Sunphotometer Aerosols Browse Data [ Single installation ] DL Doppler Lidar Cloud Properties Not Online [ Single installation ] ECOR Eddy Correlation Flux Measurement System Surface/Subsurface Properties Not Online [ Single installation ]

120

ARM - Instrument - assist  

NLE Websites -- All DOE Office Websites (Extended Search)

govInstrumentsassist govInstrumentsassist Documentation ASSIST : Instrument Mentor Monthly Summary (IMMS) reports ASSIST : Data Quality Assessment (DQA) reports ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Instrument : Atmospheric Sounder Spectrometer for Infrared Spectral Technology (ASSIST) Instrument Categories Radiometric The Atmospheric Sounder Spectrometer for Infrared Spectral Technology (ASSIST), like the AERI, measures infrared spectral zenith radiance at high spectral resolution. Output Datastreams assistch1 : Atmospheric Sounder Spectrometer for Infrared Spectral Technology (ASSIST): channel 1 data assistch2 : Atmospheric Sounder Spectrometer for Infrared Spectral Technology (ASSIST): channel 2 data

Note: This page contains sample records for the topic "aos instrument suite" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

ARM - Instrument - spn  

NLE Websites -- All DOE Office Websites (Extended Search)

govInstrumentsspn govInstrumentsspn Documentation SPN : Instrument Mentor Monthly Summary (IMMS) reports SPN : Data Quality Assessment (DQA) reports ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Instrument : Sunshine Pyranometer (SPN) Instrument Categories Radiometric The Sunshine Pyranometer (SPN) measures total and diffuse short wave solar irradiance with an array of seven thermopile detectors arranged beneath a permanent shading pattern. The instrument is able to measure both total and diffuse irradiance with no moving parts. Primary Measurements The following measurements are those considered scientifically relevant. Shortwave broadband diffuse downwelling irradiance Shortwave broadband total downwelling irradiance

122

ARM - Instrument - sws  

NLE Websites -- All DOE Office Websites (Extended Search)

govInstrumentssws govInstrumentssws Documentation SWS : Handbook SWS : Instrument Mentor Monthly Summary (IMMS) reports SWS : Data Quality Assessment (DQA) reports ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Instrument : Shortwave Spectroradiometer (SWS) Instrument Categories Aerosols, Radiometric General Overview The Shortwave Spectroradiometer (SWS), measures the absolute visible and near infrared spectral radiance (units of watts per meter square per nanometer per steradian) of the zenith directly above the instrument. The SWS is a moderate resolution sensor comprised of two Zeiss spectroradiometers (MMS 1 NIR enhanced and NIR-PGS 2.2) for visible and near-infrared detection in the wavelength range 350 - 2170 nm. The sampling

123

ARM - Instrument - smos  

NLE Websites -- All DOE Office Websites (Extended Search)

govInstrumentssmos govInstrumentssmos Documentation SMOS : Handbook SMOS : Instrument Mentor Monthly Summary (IMMS) reports SMOS : Data Quality Assessment (DQA) reports ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Instrument : Surface Meteorological Observation System Instruments for SGP (SMOS) Instrument Categories Surface Meteorology Picture of the Surface Meteorological Observation System (SMOS) Picture of the Surface Meteorological Observation System (SMOS) General Overview The Surface Meteorological Observation System (SMOS) mostly uses conventional in situ sensors to obtain 1-minute, 30-minute, and 1440-minute (daily) averages of surface wind speed, wind direction, air temperature, relative humidity (RH), barometric pressure, and precipitation at the

124

ARM - Instrument - sashe  

NLE Websites -- All DOE Office Websites (Extended Search)

govInstrumentssashe govInstrumentssashe Documentation SASHE : Instrument Mentor Monthly Summary (IMMS) reports SASHE : Data Quality Assessment (DQA) reports ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Instrument : Shortwave Array Spectroradiometer-Hemispheric (SASHE) Beneficiary of Recovery Act funding. Instrument Categories Radiometric General Overview The Shortwave Array Spectroradiometer - Hemispheric (SASHE) uses a hemispheric spectralon diffuser and rotating shadowband similar to the MFRSR and RSS instruments, so it also provides spectrally resolved, direct-normal, diffuse-horizontal, and total-horizontal irradiances, and can be calibrated in situ via Langley regression. The SASHE incorporates

125

ARM - Instrument - nimfr  

NLE Websites -- All DOE Office Websites (Extended Search)

govInstrumentsnimfr govInstrumentsnimfr Documentation NIMFR : Handbook NIMFR : Instrument Mentor Monthly Summary (IMMS) reports NIMFR : Data Quality Assessment (DQA) reports ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Instrument : Normal Incidence Multifilter Radiometer (NIMFR) Instrument Categories Aerosols, Radiometric Picture of the Normal Incidence Multi-Filter Radiometer (NIMFR) Picture of the Normal Incidence Multi-Filter Radiometer (NIMFR) General Overview The Normal Incidence Multi-Filter Radiometer (NIMFR) is a ground-based instrument that provides a time series of the shortwave spectral direct normal irradiance. Additionally, there is a broadband silicon detector that can crudely measure the direct normal broadband irradiance. These

126

ARM - Instrument - vdis  

NLE Websites -- All DOE Office Websites (Extended Search)

govInstrumentsvdis govInstrumentsvdis Documentation VDIS : Instrument Mentor Monthly Summary (IMMS) reports VDIS : Data Quality Assessment (DQA) reports ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Instrument : Video Disdrometer (VDIS) Instrument Categories Surface Meteorology General Overview A disdrometer is an instrument used to measure the drop size distribution and velocity of falling hydrometeors. The 2-dimensional video-disdrometer (vdis) is comprised of video cameras capable of observing individual hydrometeors from views perpendicular to each other. Two CCD line scan cameras are directed towards the measurement area. Objects passing thru the measurement area-which is determined by the cross-section of the two

127

ARM - Instrument - rl  

NLE Websites -- All DOE Office Websites (Extended Search)

govInstrumentsrl govInstrumentsrl Documentation RL : Handbook RL : Instrument Mentor Monthly Summary (IMMS) reports RL : Data Quality Assessment (DQA) reports ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Instrument : Raman Lidar (RL) Beneficiary of Recovery Act funding. Instrument Categories Aerosols, Atmospheric Profiling Picture of the Raman Lidar (RL) Picture of the Raman Lidar (RL) General Overview The Raman Lidar (RL) is an active, ground-based laser remote sensing instrument that measures vertical profiles of water-vapor mixing ratio and several cloud- and aerosol-related quantities. Lidar (light detection and ranging) is the optical analog of radar, using pulses of laser radiation to probe the atmosphere. This system is fully computer automated, and will run

128

ARM - Instrument - mwr  

NLE Websites -- All DOE Office Websites (Extended Search)

govInstrumentsmwr govInstrumentsmwr Documentation MWR : Handbook MWR : Instrument Mentor Monthly Summary (IMMS) reports MWR : Data Quality Assessment (DQA) reports ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Instrument : Microwave Radiometer (MWR) Instrument Categories Radiometric, Cloud Properties, Atmospheric Profiling Picture of the Microwave Radiometer (MWR) Picture of the Microwave Radiometer (MWR) General Overview The Microwave Radiometer (MWR) provides time-series measurements of column-integrated amounts of water vapor and liquid water. The instrument itself is a sensitive microwave receiver that detects the microwave emissions of the vapor and liquid water molecules in the atmosphere at two

129

EMSL: Science: Instruments  

NLE Websites -- All DOE Office Websites (Extended Search)

Full Instrument List Full Instrument List To help with proposal planning, icons in the table below indicate instrument availability: 10 hours a day, 5 days a week 24 hours a day, 7 days a week Instrument Contact 5500XL SOLiD Sequencers Markillie,Lye Meng Orr, Galya Analytical: Total Organic Carbon Analyzer (TOC) Wietsma, Tom Analytical: Chromatograph, Gas/Mass Spec System 2005 Wietsma, Tom Analytical: Chromatograph, Ion Wietsma, Tom Analytical: Chromatograph, Liquid Wietsma, Tom Atmospheric Pressure Reactor System Tonkyn, Russell Catalysis: UHV Model Catalysts, High Pressure Szanyi, Janos Computing: Cascade (Atipa 1440 Intel Xeon-Phi Node FDR-Infiniband Linux Cluster) Baxter, Doug Computing: Data File Storage (Aurora) (GB) Cowley, Dave Wright, Ryan CyTOF - Mass Cytometry Orr, Galya Deposition: Hybrid Thin Film Deposition System

130

ARM - Instrument - rain  

NLE Websites -- All DOE Office Websites (Extended Search)

govInstrumentsrain govInstrumentsrain Documentation RAIN : Handbook RAIN : Instrument Mentor Monthly Summary (IMMS) reports RAIN : Data Quality Assessment (DQA) reports ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Instrument : Rain Gauge (RAIN) Beneficiary of Recovery Act funding. Instrument Categories Surface Meteorology General Overview The tipping bucket rain gauge was located next to the disdrometer. It was replaced with a weighing bucket rain gauge in FY2010. Please contact the instrument mentor, if you have any questions. Output Datastreams rain : Rain gauge Primary Measurements The following measurements are those considered scientifically relevant. Precipitation Locations Eastern North Atlantic

131

ARM - Instrument Datastreams  

NLE Websites -- All DOE Office Websites (Extended Search)

govDataInstrument Datastreams govDataInstrument Datastreams Measurement Categories Select below to highlight datastreams in specified measurement categories. Aerosols The effect of aerosols is measured by instrument systems and lidars that provide data on the size distribution, optical properties, scattering, and extinction of aerosols. Atmospheric Carbon Measurements of atmospheric carbon are obtained from samples collected at the Southern Great Plains site. For more information about these measurements, see the ARM Carbon Project website. Coming soon: Aircraft carbon profile samples Atmospheric State Cloud Properties Active and passive remote sensing instruments are used to measure the macroscopic properties (horizontal and vertical distributions) of clouds, and the microphysical properties (sizes, shapes, and phases [water or ice])

132

1996 Beam Instrumentation Workshop  

NLE Websites -- All DOE Office Websites (Extended Search)

1996 Beam Instrumentation Workshop BIW '96 logo The Advanced Photon Source (APS) Argonne National Laboratory May 6-9, 1996 Dear Colleague: It is my pleasure to invite you to the...

133

Nuclear Imaging instrumentation  

NLE Websites -- All DOE Office Websites (Extended Search)

Nuclear Imaging instrumentation Advances in gamma-ray detection and imaging have increased the pace of discovery in a broad cross-section of the sciences ranging from nuclear...

134

ARM - Instrument - ngm  

NLE Websites -- All DOE Office Websites (Extended Search)

from you Send us a note below or call us at 1-888-ARM-DATA. Send Instrument : Nested Grid Model (NGM) Note: ngm is currently inactive andor retired. Active Dates 1993.10.09 -...

135

Virtual Doppler Lidar Instrument  

Science Conference Proceedings (OSTI)

Doppler lidars measure the range-resolved line-of-sight wind component by extracting the Doppler shift of radiation backscattered from atmospheric aerosols and molecules. A virtual instrument was developed to simulate wind measurements by flying ...

Ines Leike; Jürgen Streicher; Christian Werner; Viktor Banakh; Igor Smalikho; Werner Wergen; Alexander Cress

2001-09-01T23:59:59.000Z

136

Computer identification of musical instruments  

Science Conference Proceedings (OSTI)

The objective is to identify musical instruments using a computer. The characteristics of a musical instrument can be determined by the frequency spectrum of a specific note. The spectrum will vary for different instruments. This variation identifies the instrument. The waveforms of musical instruments (simulated by an electronic keyboard) are stored in the computer. Experimental data were collected for clarinet

Sudha Rani Narasimhan

1992-01-01T23:59:59.000Z

137

New Optimal Sensor Suite for Ultrahigh Temperature Fossil Fuel Applications  

DOE Green Energy (OSTI)

Accomplishments during Phase II of a program to develop and demonstrate photonic sensor technology for the instrumentation of advanced powerplants are described. The goal of this project is the research and development of advanced, robust photonic sensors based on improved sapphire optical waveguides, and the identification and demonstration of applications of the new sensors in advanced fossil fuel power plants, where the new technology will contribute to improvements in process control and monitoring. During this program work period, major progress has been experienced in the development of the sensor hardware, and the planning of the system installation and operation. The major focus of the next work period will be the installation of sensors in the Hamilton, Ohio power plant, and demonstration of high-temperature strain gages during mechanical testing of SOFC components.

John Coggin; Jonas Ivasauskas; Russell G. May; Michael B. Miller; Rena Wilson

2006-09-30T23:59:59.000Z

138

Evaluation of Sediment Toxicity Using a Suite of Assessment Tools  

E-Print Network (OSTI)

Accurate characterization of risk of adverse ecological effects related to contaminated sediment presents a particularly difficult challenge. A series of studies has been conducted to investigate the utility of various tools for assessment of sediment toxicity. The goal of this research was to provide information which could help increase the accuracy with which predictions of toxicity could be made at hazardous sites. A calibration study was conducted using model PAHs, PCBs, a binary PAH mixture and a coal-tar mixture. This study was a collaborative effort among five university-based Superfund Research Programs (SRPs). Each program, with the help of funding through the NIEHS Superfund Research Program, has developed a chemical-class specific assay to estimate toxicity of contaminants in sediment. This suite of bioassays expands the range of data typically obtained through the use of standard aquatic toxicity assays. A series of caged in situ exposure studies has been conducted using juvenile Chinook salmon and Pacific staghorn sculpin in the Lower Duwamish Waterway. The study aimed to investigate the utility of selected biomarkers in evaluating the relationship between contaminants present in environmental samples and response in receptors following an in situ caged exposure. Results found that DNA adducts detected in exposed fish were significantly higher than controls in 2004 and 2006, and DNA adducts appear to be a reliable indicator of exposure, although no dose-response relationship was present. Western blot analysis of CYP1A1 was not indicative of exposure levels. The final study conducted was concerned with evaluating the utility of using solid phase microextraction (SPME) fibers in situ to evaluate contaminated sediment. Levels of PAHs and PCBs in sediment often exceeded sediment quality guidelines; however, results from aquatic toxicity bioassays using Hyalella azteca were mostly negative, thus levels of contaminants detected on SPME fibers could not be associated with adverse effects in Hyalella. However, regression analysis of total PAHs present in sediment and levels of PAHs detected in porewater SPME fiber samplers, which were placed 5 cm into the sediment for 30 days, revealed a strongly correlated linear relationship (R2 = .779). Normalization of the sediment data to total organic carbon was performed to determine if the trend would remain present, and the linear relationship was again confirmed (R2 =.709).

Kelley, Matthew A

2010-05-01T23:59:59.000Z

139

Traditional And Angle-dependent Characterization Of Penn State’s Panel Transmission Loss Suite.  

E-Print Network (OSTI)

??The Center for Acoustics and Vibration at Penn State has a Panel Transmission Loss Suite consisting of a reverberation chamber coupled to an anechoic room.… (more)

Bauch, Paul

2013-01-01T23:59:59.000Z

140

Analysis of Thermostat Design for Vertical Fan Coil Units Within Modern Window-Wall Condominium Suites.  

E-Print Network (OSTI)

??The aim for this research is to identify the issues with poor thermostat designs in a window-wall condominium suite during cooling season, and to investigate… (more)

Ruff, Shawn

2013-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "aos instrument suite" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Assessing the local windfield with instrumentation  

DOE Green Energy (OSTI)

This report concerns the development and testing of a technique for the initial screening and evaluation of potential sites for wind-energy conversion systems (WECS). The methodology was developed through a realistic siting exercise. The siting exercise involved measurements of winds along the surface and winds aloft using a relatively new instrument system, the Tethered Aerodynamic Lifting Anemometer (TALA) kite; notation of ecological factors such as vegetation flagging, soil erosion and site exposure, and verification of an area best suited for wind-energy development by establishing and maintaining a wind monitoring network. The siting exercise was carried out in an approximately 100-square-mile region of the Tehachapi Mountains of Southern California. The results showed that a comprehensive site survey involving field measurements, ecological survey, and wind-monitoring can be an effective tool for preliminary evaluation of WECS sites.

Zambrano, T.G.

1980-10-01T23:59:59.000Z

142

Automated Manufacture of Spinal Instrumentation.  

E-Print Network (OSTI)

??Current scoliosis corrective surgeries may include the use of multiple instrumentation devices including screws, wires, nuts, and rods. The instrumentation in most cases is implemented… (more)

Pilson, Richard Ryan

2006-01-01T23:59:59.000Z

143

LANSCE | Lujan Center | Instruments | SPEAR  

NLE Websites -- All DOE Office Websites (Extended Search)

Surface Profile Analysis Reflectometer SPEAR Home Page SPEAR Technical Sheet Jaroslaw Majewski Jarek Majewski Instrument Scientist 505.667.8840 jarek@lanl.gov Peng Wang Instrument...

144

ARM - Instrument - thwaps  

NLE Websites -- All DOE Office Websites (Extended Search)

govInstrumentsthwaps govInstrumentsthwaps Documentation THWAPS : Handbook THWAPS : Instrument Mentor Monthly Summary (IMMS) reports THWAPS : Data Quality Assessment (DQA) reports ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Instrument : Temperature, Humidity, Wind and Pressure Sensors (THWAPS) Instrument Categories Surface Meteorology Picture of the Temperature, Humidity, Wind, and Pressure System (THWAPS) Picture of the Temperature, Humidity, Wind, and Pressure System (THWAPS) General Overview The temperature, humidity, wind, and pressure systems (THWAPS) provide surface reference values of these measurements for balloon-borne sounding system (BBSS) launches. THWAPS are located adjacent to BBSS launch sites at

145

ARM - Instrument - hsrl  

NLE Websites -- All DOE Office Websites (Extended Search)

govInstrumentshsrl govInstrumentshsrl Documentation HSRL : Instrument Mentor Monthly Summary (IMMS) reports HSRL : Data Quality Assessment (DQA) reports ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Instrument : High Spectral Resolution Lidar (HSRL) Beneficiary of Recovery Act funding. Instrument Categories Aerosols, Cloud Properties The High Spectral Resolution Lidar (HSRL ) provides calibrated measurements of aerosol optical depth, volume backscatter coefficient, cross section, and depolarization. Measurements are computed from ratios of the particulate scattering to the measured molecular scattering. This provides absolute calibration and makes the calibration insensitive to dirt or precipitation on the output window. A very narrow, angular field-of-view

146

ARM - Instrument - tps  

NLE Websites -- All DOE Office Websites (Extended Search)

govInstrumentstps govInstrumentstps Documentation TPS : Handbook TPS : Instrument Mentor Monthly Summary (IMMS) reports TPS : Data Quality Assessment (DQA) reports ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Instrument : Total Precipitation Sensor (TPS) Instrument Categories Surface Meteorology Picture of the Total Precipitation Sensor (TPS) Picture of the Total Precipitation Sensor (TPS) General Overview The total precipitation sensor (TPS) measures atmospheric temperature, horizontal wind, and precipitation. It consists of a sensor head and electronics enclosure that are integrated as a single unit. Output Datastreams tps : Total Precipitation Sensor Primary Measurements The following measurements are those considered scientifically relevant.

147

ARM - Instrument - rwp  

NLE Websites -- All DOE Office Websites (Extended Search)

govInstrumentsrwp govInstrumentsrwp Documentation RWP : Handbook RWP : Instrument Mentor Monthly Summary (IMMS) reports RWP : Data Quality Assessment (DQA) reports ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Instrument : Radar Wind Profiler (RWP) Instrument Categories Atmospheric Profiling General Overview The radar wind profiler/radio acoustic sounding system (RWP/RASS), available in 915-MHz (for U.S. deployments) and 1290-MHz (for deployments outside the U.S.), measures wind profiles and backscattered signal strength between (nominally) 0.1 km and 5 km and virtual temperature profiles between 0.1 km and 2.5 km. It operates by transmitting electromagnetic energy into the atmosphere and measuring the strength and frequency of

148

ARM - Instrument - mwrhf  

NLE Websites -- All DOE Office Websites (Extended Search)

govInstrumentsmwrhf govInstrumentsmwrhf Documentation MWRHF : Handbook MWRHF : Instrument Mentor Monthly Summary (IMMS) reports MWRHF : Data Quality Assessment (DQA) reports ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Instrument : Microwave Radiometer - High Frequency (MWRHF) Instrument Categories Radiometric, Cloud Properties, Atmospheric Profiling Picture of the Microwave Radiometer-High Frequency (MWRHF) Picture of the Microwave Radiometer-High Frequency (MWRHF) General Overview The Microwave Radiometer-High Frequency (MWRHF) provides time-series measurements of brightness temperatures from two channels centered at 90 and 150 GHz. These two channels are sensitive to the presence of liquid water and precipitable water vapor.

149

ARM - Instrument - swacr  

NLE Websites -- All DOE Office Websites (Extended Search)

govInstrumentsswacr govInstrumentsswacr Documentation SWACR : Instrument Mentor Monthly Summary (IMMS) reports SWACR : Data Quality Assessment (DQA) reports ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Instrument : W-Band (95 GHz) ARM Cloud Radar, mounted to scan (SWACR) Instrument Categories Cloud Properties Output Datastreams swacrblrhi : S-WACR Boundary-layer Range-Height Indicator scan swacrcal : S-WACR calibration information swacrcwrhi : S-WACR Cross-Wind Range-Height Indicator scan swacrfpt : S-WACR - Fixed PoinTing mode swacrhsrhi : S-WACR Horizon-to-horizon Range-Height Indicator scan swacrppi : S-WACR Plan Position Indicator scan swacrspeccmaskcopol : S-WACR ARM Cloud Radar, filtered spectral

150

ARM - Instrument - mfrsr  

NLE Websites -- All DOE Office Websites (Extended Search)

govInstrumentsmfrsr govInstrumentsmfrsr Documentation MFRSR : Handbook MFRSR : Instrument Mentor Monthly Summary (IMMS) reports MFRSR : Data Quality Assessment (DQA) reports ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Instrument : Multifilter Rotating Shadowband Radiometer (MFRSR) Instrument Categories Aerosols, Radiometric Picture of the Multi-Filter Rotating Shadowband Radiometer (MFRSR) Picture of the Multi-Filter Rotating Shadowband Radiometer (MFRSR) General Overview The multifilter rotating shadowband radiometer (MFRSR) takes spectral measurements of direct normal, diffuse horizontal and total horizontal solar irradiances. These measurements are at nominal wavelengths of 415, 500, 615, 673, 870, and 940 nm. The measurements are made at a

151

ARM - Instrument - mmcr  

NLE Websites -- All DOE Office Websites (Extended Search)

govInstrumentsmmcr govInstrumentsmmcr Documentation MMCR : Handbook MMCR : Instrument Mentor Monthly Summary (IMMS) reports MMCR : Data Quality Assessment (DQA) reports ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Instrument : Millimeter Wavelength Cloud Radar (MMCR) Instrument Categories Cloud Properties Picture of the Millimeter Wave Cloud Radar (MMCR) Picture of the Millimeter Wave Cloud Radar (MMCR) General Overview The MMCR systems probe the extent and composition of clouds at millimeter wavelengths. The MMCR is a zenith-pointing radar that operates at a frequency of 35 GHz. The main purpose of this radar is to determine cloud boundaries (e.g., cloud bottoms and tops). This radar will also report radar reflectivity (dBZ) of the atmosphere up to 20 km.

152

ARM - Instrument - wacr  

NLE Websites -- All DOE Office Websites (Extended Search)

govInstrumentswacr govInstrumentswacr Documentation WACR : Handbook WACR : Instrument Mentor Monthly Summary (IMMS) reports WACR : Data Quality Assessment (DQA) reports ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Instrument : W-Band (95 GHz) ARM Cloud Radar (WACR) Instrument Categories Cloud Properties Latest version W-band ARM cloud radar Latest version W-band ARM cloud radar General Overview The W-band Atmospheric Radiation Measurement (ARM) Program Cloud Radar (WACR) systems are zenith pointing Doppler radars that probe the extent and composition of clouds at 95.04 GHz. The main purpose of this radar is to determine cloud boundaries (e.g., cloud bottoms and tops). This radar reports estimates for the first three spectra moments for each range gate

153

ARM - Instrument - rss  

NLE Websites -- All DOE Office Websites (Extended Search)

govInstrumentsrss govInstrumentsrss Documentation RSS : Handbook RSS : Instrument Mentor Monthly Summary (IMMS) reports RSS : Data Quality Assessment (DQA) reports ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Instrument : Rotating Shadowband Spectroradiometer (RSS) Instrument Categories Radiometric General Overview The Rotating Shadowband Spectroradiometer (RSS) implements the same automated shadowbanding technique used by the multifilter rotating shadowband radiometer (MFRSR), and so it too provides spectrally resolved, direct-normal, diffuse-horizontal, and total-horizontal irradiances, and can be calibrated in situ via Langley regression. The irradiance spectra are measured simultaneously at all spectral elements (pixels) in 360-nm to

154

ARM - Instrument - gvr  

NLE Websites -- All DOE Office Websites (Extended Search)

govInstrumentsgvr govInstrumentsgvr Documentation GVR : Handbook GVR : Instrument Mentor Monthly Summary (IMMS) reports GVR : Data Quality Assessment (DQA) reports ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Instrument : G-band (183 GHz) Vapor Radiometer (GVR) Instrument Categories Radiometric Picture of the G-band (183 GHz) Vapor Radiometer (GVR) Picture of the G-band (183 GHz) Vapor Radiometer (GVR) General Overview The G-Band Vapor Radiometer (GVR) provides time-series measurements of brightness temperatures from four double sideband channels centered at ±1, ±3, ±7, and ±14 GHz around the 183.31-GHz water vapor line. Atmospheric emission in this spectral region is primarily due to water vapor, with some

155

ARM - Instrument - xsacr  

NLE Websites -- All DOE Office Websites (Extended Search)

govInstrumentsxsacr govInstrumentsxsacr Documentation XSACR : Handbook XSACR : Instrument Mentor Monthly Summary (IMMS) reports XSACR : Data Quality Assessment (DQA) reports ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Instrument : X-Band Scanning ARM Cloud Radar (XSACR) Beneficiary of Recovery Act funding. Instrument Categories Cloud Properties Picture of the X-band scanning ARM cloud radar Picture of the X-band scanning ARM cloud radar Note: All the Scanning ARM Cloud Radars have been technically accepted by ARM as meeting specification and each radar's first data are available at this URL: http://www.archive.arm.gov/sacr/. ARM's scanning cloud radars are fully coherent dual-frequency, dual-polarization Doppler radars mounted on a common scanning pedestal.

156

ARM - Instrument - sirs  

NLE Websites -- All DOE Office Websites (Extended Search)

govInstrumentssirs govInstrumentssirs Documentation SIRS : Handbook SIRS : Instrument Mentor Monthly Summary (IMMS) reports SIRS : Data Quality Assessment (DQA) reports ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Instrument : Solar and Infrared Radiation Station (SIRS) Instrument Categories Radiometric Picture of the Solar Infrared Radiation Station (SIRS) Picture of the Solar Infrared Radiation Station (SIRS) General Overview The Solar Infrared Radiation Station (SIRS) provides continuous measurements of broadband shortwave (solar) and longwave (atmospheric or infrared) irradiances for downwelling and upwelling components. These 1-minute data are collected from a network of stations to help determine

157

ARM - Instrument - vceil  

NLE Websites -- All DOE Office Websites (Extended Search)

govInstrumentsvceil govInstrumentsvceil Documentation VCEIL : Handbook VCEIL : Instrument Mentor Monthly Summary (IMMS) reports VCEIL : Data Quality Assessment (DQA) reports ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Instrument : Vaisala Ceilometer (VCEIL) Beneficiary of Recovery Act funding. Instrument Categories Cloud Properties, Atmospheric Profiling Picture of the Vaisala Ceilometer (Model CL31) Picture of the Vaisala Ceilometer (Model CL31) General Overview The Vaisala Ceilometer (VCEIL) is a self-contained, ground-based, active, remote-sensing device designed to measure cloud-base height, vertical visibility, and potential backscatter signals by aerosols. It detects up to three cloud layers simultaneously. Model CL31 has a maximum vertical range

158

ARM - Instrument - twrcam  

NLE Websites -- All DOE Office Websites (Extended Search)

govInstrumentstwrcam govInstrumentstwrcam Documentation TWRCAM : Handbook TWRCAM : Instrument Mentor Monthly Summary (IMMS) reports TWRCAM : Data Quality Assessment (DQA) reports ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Instrument : Tower Camera (TWRCAM) Instrument Categories Surface Meteorology Picture of the Tower Camera (TCAM) Picture of the Tower Camera (TCAM) General Overview The tower camera in Barrow provides hourly images of ground surrounding the tower. These images may be used to determine fractional snow cover as winter arrives, for comparison with the albedo that can be calculated from downward-looking radiometers, as well as some indication of present weather. Similarly, during spring time, the camera images show the changes

159

ARM - Instrument - pgs  

NLE Websites -- All DOE Office Websites (Extended Search)

govInstrumentspgs govInstrumentspgs Documentation PGS : Handbook PGS : Instrument Mentor Monthly Summary (IMMS) reports PGS : Data Quality Assessment (DQA) reports ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Instrument : Precision Carbon Dioxide Mixing Ratio System (PGS) Instrument Categories Atmospheric Carbon Picture of the Precision CO2 Mixing Ratio System (PGS) Picture of the Precision CO2 Mixing Ratio System (PGS) General Overview This precision gas system (PGS) makes high-accuracy, high-precision measurements of CO2 mixing ratio (ppmv dry air) in air sampled at 2, 4, 25, and 60 m above the ground. Output Datastreams pgs : Precision Gas System (CO2): 2, 4, 25, 60 m Primary Measurements The following measurements are those considered scientifically relevant.

160

ARM - Instrument - csapr  

NLE Websites -- All DOE Office Websites (Extended Search)

govInstrumentscsapr govInstrumentscsapr Documentation CSAPR : Handbook CSAPR : Instrument Mentor Monthly Summary (IMMS) reports CSAPR : Data Quality Assessment (DQA) reports ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Instrument : C-Band ARM Precipitation Radar (CSAPR) Beneficiary of Recovery Act funding. Instrument Categories Cloud Properties General Overview The C-SAPR is a C-band dual-polarization Doppler weather radar manufactured by ARC, Inc. The C-SAPR operates in a simultaneous transmit and receive (STAR) mode, meaning that the transmit signal is split so that power is transmitted on both horizontal and vertical polarizations at the same time. The C-SAPR also has the ability to transmit on a single polarization

Note: This page contains sample records for the topic "aos instrument suite" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

ARM - Instrument - kasacr  

NLE Websites -- All DOE Office Websites (Extended Search)

govInstrumentskasacr govInstrumentskasacr Documentation KASACR : Handbook KASACR : Instrument Mentor Monthly Summary (IMMS) reports KASACR : Data Quality Assessment (DQA) reports ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Instrument : Ka-Band Scanning ARM Cloud Radar (KASACR) Beneficiary of Recovery Act funding. Instrument Categories Cloud Properties Note: All the Scanning ARM Cloud Radars have been technically accepted by ARM as meeting specification and each radar's first data are available at this URL: http://www.archive.arm.gov/sacr/. ARM's scanning cloud radars are fully coherent dual-frequency, dual-polarization Doppler radars mounted on a common scanning pedestal. Each pedestal includes a Ka-band radar (2kW peak power) and the deployment

162

Piping inspection instrument carriage  

DOE Patents (OSTI)

This invention, an instrument carriage for inspection of piping, comprises front and rear leg assemblies for engaging the interior of the piping and supporting and centering the carriage therein, an instrumentation arm carried by a shaft system running from front to rear leg assemblies. The shaft system has a screw shaft for moving the arm axially and a spline gear for moving the arm azimuthally. The arm has a pair of air cylinders that raise and lower a plate in the radial direction. On the plate are probes including, an eddy current probe and an ultrasonic testing probe. The ultrasonic testing probe is capable of spinning 360[degrees] about its axis.

Hapstack, M.; Talarek, T.R.; Zollinger, W.T.; Heckendorn, F.M. II; Park, L.R.

1991-01-01T23:59:59.000Z

163

Piping inspection instrument carriage  

DOE Patents (OSTI)

This invention, an instrument carriage for inspection of piping, comprises front and rear leg assemblies for engaging the interior of the piping and supporting and centering the carriage therein, an instrumentation arm carried by a shaft system running from front to rear leg assemblies. The shaft system has a screw shaft for moving the arm axially and a spline gear for moving the arm azimuthally. The arm has a pair of air cylinders that raise and lower a plate in the radial direction. On the plate are probes including, an eddy current probe and an ultrasonic testing probe. The ultrasonic testing probe is capable of spinning 360{degrees} about its axis.

Hapstack, M.; Talarek, T.R.; Zollinger, W.T.; Heckendorn, F.M. II; Park, L.R.

1991-12-31T23:59:59.000Z

164

Interfacing to accelerator instrumentation  

SciTech Connect

As the sensory system for an accelerator, the beam instrumentation provides a tremendous amount of diagnostic information. Access to this information can vary from periodic spot checks by operators to high bandwidth data acquisition during studies. In this paper, example applications will illustrate the requirements on interfaces between the control system and the instrumentation hardware. A survey of the major accelerator facilities will identify the most popular interface standards. The impact of developments such as isochronous protocols and embedded digital signal processing will also be discussed.

Shea, T.J.

1995-12-31T23:59:59.000Z

165

ARM - Campaign Instrument - dri-air  

NLE Websites -- All DOE Office Websites (Extended Search)

Send Campaign Instrument : Desert Research Institute Airborne Aerosol Instruments (DRI-AIR) Instrument Categories Aerosols, Airborne Observations Campaigns Aerosol IOP ...

166

Fault-based test suite prioritization for specification-based testing  

Science Conference Proceedings (OSTI)

Context: Existing test suite prioritization techniques usually rely on code coverage information or historical execution data that serve as indicators for estimating the fault-detecting ability of test cases. Such indicators are primarily empirical in ... Keywords: Fault class hierarchy, Fault-based prioritization, Fault-based testing, Software testing, Specification-based testing, Test suite prioritization

Yuen Tak Yu; Man Fai Lau

2012-02-01T23:59:59.000Z

167

ORNL Neutron Sciences Instrument Fact Sheets  

NLE Websites -- All DOE Office Websites (Extended Search)

of each neutron scattering instrument at ORNL. You can also view SNS Instrument and HFIR Instrument pages that go to the related instrument's web pages. Detailed information...

168

SNS Instrument Systems | ORNL Neutron Sciences  

NLE Websites -- All DOE Office Websites (Extended Search)

instrument layout. Click for details. Instruments at the Spallation Neutron Source SNS currently has 13 instruments available for users. Each instrument is designed to complement...

169

A.O. Smith | Open Energy Information  

Open Energy Info (EERE)

A.O. Smith A.O. Smith Jump to: navigation, search Name A.O. Smith Place Milwaukee, WI Zip 53224 Sector Efficiency Stock Symbol AOS Number of employees 10,000 Phone number 414-359-4000 Website http://www.aosmith.com/ Coordinates 43.1676911°, -88.0411993° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":43.1676911,"lon":-88.0411993,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

170

AC resistance measuring instrument  

DOE Patents (OSTI)

An auto-ranging AC resistance measuring instrument for remote measurement of the resistance of an electrical device or circuit connected to the instrument includes a signal generator which generates an AC excitation signal for application to a load, including the device and the transmission line, a monitoring circuit which provides a digitally encoded signal representing the voltage across the load, and a microprocessor which operates under program control to provide an auto-ranging function by which range resistance is connected in circuit with the load to limit the load voltage to an acceptable range for the instrument, and an auto-compensating function by which compensating capacitance is connected in shunt with the range resistance to compensate for the effects of line capacitance. After the auto-ranging and auto-compensation functions are complete, the microprocessor calculates the resistance of the load from the selected range resistance, the excitation signal, and the load voltage signal, and displays of the measured resistance on a digital display of the instrument. 8 figs.

Hof, P.J.

1983-10-04T23:59:59.000Z

171

Instrumentation Environment User's Guide  

E-Print Network (OSTI)

Contents Introduction iii 1 Concepts 1 1.1 Events : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : 1 1.2 Event Traces : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : 1 1.3 Timestamps : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : 1 1.4 Processor Numbers : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : 2 1.5 Trace Buffers : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : 2 1.6 Trace Library Synchronization : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : 2 1.7 Trace Output : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : 3 2 Instrumenting 4 2.1 Before Initialization : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : 4 2.1.1

Roger Noe; Revised Ruth; A. Aydt

1994-01-01T23:59:59.000Z

172

A Moored Profiling Instrument*  

Science Conference Proceedings (OSTI)

The specifications and performance of a moored vertical profiling instrument, designed to acquire near-full-ocean-depth profile time series data at high vertical resolution, are described. The 0.8-m-diameter by 0.4-m-wide device utilizes a ...

K. W. Doherty; D. E. Frye; S. P. Liberatore; J. M. Toole

1999-11-01T23:59:59.000Z

173

On Combining Instruments  

Science Conference Proceedings (OSTI)

Suppose two instruments I0 and I1 measure the same quantity with the same resolution, where it is known that I0 is more reliable. The second, I1, is assumed a distortion of I0 in some sense. A statistical method is outlined where 1) the ...

Konstantinos Fokianos; Benjamin Kedem; Jing Qin; Jeffrey L. Haferman; David A. Short

1998-02-01T23:59:59.000Z

174

ARM - Campaign Instrument - ronbrown  

NLE Websites -- All DOE Office Websites (Extended Search)

govInstrumentsronbrown govInstrumentsronbrown Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Campaign Instrument : NOAA Research Vessel Ron Brown (RONBROWN) Instrument Categories Aerosols, Radiometric, Cloud Properties, Ocean Observations, Surface Meteorology, Atmospheric Profiling Campaigns Nauru99 Campaign [ Download Data ] Tropical Western Pacific, 1999.06.16 - 1999.07.15 Primary Measurements Taken The following measurements are those considered scientifically relevant. Refer to the datastream (netcdf) file headers for the list of all available measurements, including those recorded for diagnostic or quality assurance purposes. Sea surface temperature Aerosol absorption Liquid water content Particle number concentration Cloud fraction

175

ARM - Instrument - ncepgfs  

NLE Websites -- All DOE Office Websites (Extended Search)

govInstrumentsncepgfs govInstrumentsncepgfs Documentation NCEPGFS : XDC documentation ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Instrument : National Centers for Environment Prediction Global Forecast System (NCEPGFS) Instrument Categories Derived Quantities and Models General Overview Since 2001, NCEP NWP forecasts (global spectral model) have been processed by Hualu Pan at NCEP/EMC and archived by Stephen Krueger at University of Utah to produce station-like column outputs at locations corresponding to the ARM and other field campaign sites. All data from Jan 2001 up to now have been re-processed by Fanglin Yang for easy access, for comparison with ARM observations, and for driving single column models and cloud resolving

176

ARM - Campaign Instrument - ecmwfdiag  

NLE Websites -- All DOE Office Websites (Extended Search)

govInstrumentsecmwfdiag govInstrumentsecmwfdiag Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Campaign Instrument : European Centre for Medium Range Weather Forecasts Diagnostic Analyses (ECMWFDIAG) Instrument Categories Derived Quantities and Models Campaigns Fall 1997 SCM IOP [ Download Data ] Southern Great Plains, 1997.09.15 - 1997.10.05 Primary Measurements Taken The following measurements are those considered scientifically relevant. Refer to the datastream (netcdf) file headers for the list of all available measurements, including those recorded for diagnostic or quality assurance purposes. Ice water content Soil surface temperature Vertical velocity Liquid water content Cloud fraction Soil moisture Precipitation Horizontal wind Atmospheric temperature

177

ARM - Campaign Instrument - mirai  

NLE Websites -- All DOE Office Websites (Extended Search)

govInstrumentsmirai govInstrumentsmirai Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Campaign Instrument : JAMSTEC Research Vessel Mirai (MIRAI) Instrument Categories Radiometric, Cloud Properties, Ocean Observations, Surface Meteorology, Atmospheric Profiling Campaigns Nauru99 Campaign [ Download Data ] Tropical Western Pacific, 1999.06.16 - 1999.07.15 Primary Measurements Taken The following measurements are those considered scientifically relevant. Refer to the datastream (netcdf) file headers for the list of all available measurements, including those recorded for diagnostic or quality assurance purposes. Sea surface temperature Liquid water content Cloud fraction CO2 concentration Backscatter depolarization ratio Hydrometeor size

178

ARM - Campaign Instrument - asd  

NLE Websites -- All DOE Office Websites (Extended Search)

govInstrumentsasd govInstrumentsasd Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Campaign Instrument : Analytical Spectral Devices Field Spectroradiometer (ASD) Instrument Categories Radiometric Campaigns Aerosol IOP [ Download Data ] Southern Great Plains, 2003.05.01 - 2003.05.31 Surface Albedo IOP [ Download Data ] Southern Great Plains, 2004.02.09 - 2004.02.13 Surface Albedo IOP [ Download Data ] Southern Great Plains, 2004.10.20 - 2004.10.26 Surface spectral albedo [ Download Data ] Southern Great Plains, 2002.08.14 - 2002.08.20 Primary Measurements Taken The following measurements are those considered scientifically relevant. Refer to the datastream (netcdf) file headers for the list of all available measurements, including those recorded for diagnostic or quality assurance

179

ARM - Campaign Instrument - sfcflux  

NLE Websites -- All DOE Office Websites (Extended Search)

govInstrumentssfcflux govInstrumentssfcflux Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Campaign Instrument : Surface Flux (SFCFLUX) Instrument Categories Radiometric, Surface Meteorology, Surface/Subsurface Properties Campaigns Tropical Warm Pool - International Cloud Experiment (TWP-ICE) [ Download Data ] Tropical Western Pacific, 2006.01.21 - 2006.02.13 Primary Measurements Taken The following measurements are those considered scientifically relevant. Refer to the datastream (netcdf) file headers for the list of all available measurements, including those recorded for diagnostic or quality assurance purposes. CO2 flux Soil surface temperature CO2 concentration Soil moisture Precipitation Horizontal wind Net broadband total irradiance

180

ARM - Instrument - tao  

NLE Websites -- All DOE Office Websites (Extended Search)

govInstrumentstao govInstrumentstao Documentation TAO : XDC documentation ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Instrument : Tropical Atmosphere Ocean from Buoys (TAO) Instrument Categories Radiometric, Ocean Observations, Surface Meteorology General Overview These data files contain 2-minute average radiation and 10-minute average meteorology, precipitation, salinity and sea surface temperature data from the seven TAO buoys located on the 165E line (8n, 5n, 2n, 0n, 2s, 5s, 8s) of the TAO Buoy Array. Data from these buoys are stored in monthly netCDF files that are generated by PMEL. The radiation data were obtained from TAO Array moorings through a collaborative effort between NOAA/PMEL/TAO and

Note: This page contains sample records for the topic "aos instrument suite" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

ARM - Instrument - sonde  

NLE Websites -- All DOE Office Websites (Extended Search)

govInstrumentssonde govInstrumentssonde Documentation SONDE : Handbook SONDE : XDC documentation ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Instrument : Balloon-Borne Sounding System (SONDE) Beneficiary of Recovery Act funding. Instrument Categories Atmospheric Profiling General Overview The balloon-borne sounding system (SONDE) provides in situ measurements (vertical profiles) of both the thermodynamic state of the atmosphere, and the wind speed and direction. During some field campaigns, sonde operations from multiple stations around a central location with baseline measurements, like a mobile facility, can provide important constraints for model simulations. At the ARM sites, sondes are launched at the following

182

ARM - Instrument - eta  

NLE Websites -- All DOE Office Websites (Extended Search)

govInstrumentseta govInstrumentseta Documentation ETA : XDC documentation ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Instrument : Eta Model Runs (ETA) Instrument Categories Derived Quantities and Models General Overview NOAA's National Centers for Environmental Prediction run a regional numerical weather analysis and forecast system that covers the entire North American Continent. The data archived by ARM since 1993-06-16 come from the 00Z and 12Z model runs and include the 0h-analysis and 6h-forecast data resulting in 4 files per day. The model used to be called "ETA", which derived from the model's vertical coordinate known as the "eta" or "step-mountain" coordinate. In 2005, the

183

ARM - Campaign Instrument - pdlidar  

NLE Websites -- All DOE Office Websites (Extended Search)

govInstrumentspdlidar govInstrumentspdlidar Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Campaign Instrument : Polarization Diversity Lidar (PDLIDAR) Instrument Categories Aerosols, Cloud Properties, Atmospheric Profiling Campaigns CRYSTAL-FACE [ Download Data ] Off Site Campaign : various, including non-ARM sites, 2002.06.26 - 2002.08.01 M-PACE - Polarization Diversity Lidar (PDL) [ Download Data ] North Slope Alaska, 2004.09.01 - 2004.10.21 Remote Cloud Sensing (RCS) Field Evaluation [ Download Data ] Southern Great Plains, 1994.04.01 - 1994.05.31 Primary Measurements Taken The following measurements are those considered scientifically relevant. Refer to the datastream (netcdf) file headers for the list of all available measurements, including those recorded for diagnostic or quality assurance

184

ARM - Campaign Instrument - asti  

NLE Websites -- All DOE Office Websites (Extended Search)

govInstrumentsasti govInstrumentsasti Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Campaign Instrument : Absolute Solar Transmittance Interferometer (ASTI) Instrument Categories Radiometric Campaigns ASTI [ Download Data ] Southern Great Plains, 1997.06.01 - 1997.06.30 ASTI [ Download Data ] Southern Great Plains, 1998.07.01 - 1998.08.27 ASTI (Absolute Solar Transmittance Interferometer) IOP [ Download Data ] Southern Great Plains, 2000.09.26 - 2000.10.09 Absolute Solar Transmittance Interferometer [ Download Data ] Southern Great Plains, 1997.09.01 - 1997.09.30 Absolute Solar Transmittance Interferometer (ASTI) [ Download Data ] Southern Great Plains, 1996.04.01 - 1996.05.31 Absolute Solar Transmittance Interferometer (ASTI) [ Download Data ]

185

ARM - Instrument - wpdn  

NLE Websites -- All DOE Office Websites (Extended Search)

govInstrumentswpdn govInstrumentswpdn Documentation WPDN : XDC documentation ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Instrument : Wind Profiler Demo Network (WPDN) Instrument Categories Atmospheric Profiling General Overview Data from an array of wind profilers are provided from NOAA's Forecast Systems Laboratory (FSL) Demonstration Division . These data include wind profiles, spectral moments, RASS temperature profiles, GPS, and surface observations. Output Datastreams 06fslwpdnmet : Wind Profiler Demo Network (WPDN): 6-min meteorological data 06fslwpdnrass : Wind Profiler Demo Network (WPDN): 6-min RASS data 06wpdnmmts : Wind Profiler Demo Network (WPDN): 6-min wind moments 60fslwpdnmet : Wind Profiler Demo Network (WPDN): meteorology data,

186

ARM - Instrument - usdarad  

NLE Websites -- All DOE Office Websites (Extended Search)

govInstrumentsusdarad govInstrumentsusdarad Documentation USDARAD : XDC documentation ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Instrument : US Department of Agriculture (USDA) Radiation Monitoring Data (USDARAD) Instrument Categories Radiometric Picture of the USDA radiometer at the SGP site Picture of the USDA radiometer at the SGP site General Overview The USDA UV-B Monitoring and Research Program is a program of the U.S. Department of Agriculture's Cooperative State Research, Education and Extension Service (CSREES). The program was initiated in 1992, through a grant to Colorado State University, to provide information on the geographical distribution and temporal trends of UVB (ultraviolet -B)

187

ARM - Instrument - gms  

NLE Websites -- All DOE Office Websites (Extended Search)

govInstrumentsgms govInstrumentsgms Documentation GMS : XDC documentation ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Instrument : Geostationary Meteorological Satellite (GMS) Note: gms is currently inactive and/or retired. Active Dates 1996.10.01 - 2003.02.16 Instrument Categories Satellite Observations General Overview GMS-5 satellite images are taken over the Tropical Western Pacific (TWP), over each of the TWP sites. The raw data are downlinked to the SeaSpace Corp. receiving station at the University of Hawaii. The GMS-5 was launched in March 1995 into a geostationary orbit above 0°N, 140°E. It carries a Visible and Infrared Spin Scan Radiometer (VISSR) with four channels, one

188

ARM - Instrument - avhrr  

NLE Websites -- All DOE Office Websites (Extended Search)

govInstrumentsavhrr govInstrumentsavhrr Documentation AVHRR : XDC documentation ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Instrument : Advanced Very High Resolution Radiometer (AVHRR) Instrument Categories Satellite Observations General Overview Measurements from the Advanced Very High Resolution Radiometer (AVHRR) on the NOAA polar orbiting satellites taken over the NSA, SHB, SGP, and TWP sites are available for distribution to the ARM community. The files are in HDF. The AVHRR data from the Australian Bureau of Meteorology (BOM) Darwin site have not yet been converted to HDF. The raw data are in ASDA (Australian Satellite Data Archive) Format.. Output Datastreams avhrr10 : AVHRR: albedo and brightness temp., NOAA-10 Satellite

189

ARM - Campaign Instrument - ecor  

NLE Websites -- All DOE Office Websites (Extended Search)

govInstrumentsecor govInstrumentsecor Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Campaign Instrument : Eddy Correlation Flux Measurement System (ECOR) Instrument Categories Surface/Subsurface Properties Campaigns Boundary Layer Cloud IOP [ Download Data ] North Slope Alaska, 2005.07.11 - 2005.08.07 Mixed-Phase Arctic Cloud Experiment [ Download Data ] North Slope Alaska, 2004.09.27 - 2004.10.21 Water Cycle Pilot Study Intensive Observations [ Download Data ] Southern Great Plains, 2002.04.01 - 2002.06.30 Primary Measurements Taken The following measurements are those considered scientifically relevant. Refer to the datastream (netcdf) file headers for the list of all available measurements, including those recorded for diagnostic or quality assurance

190

ARM - Campaign Instrument - aerosmassspec  

NLE Websites -- All DOE Office Websites (Extended Search)

govInstrumentsaerosmassspec govInstrumentsaerosmassspec Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Campaign Instrument : Aerosol Mass Spectrometer (AEROSMASSSPEC) Instrument Categories Aerosols, Atmospheric Carbon, Airborne Observations Campaigns 2006 MAX-Mex-Megacity Aerosol eXperiment - Mexico City [ Download Data ] Off Site Campaign : various, including non-ARM sites, 2006.03.03 - 2006.03.28 2007 Cumulus Humilis Aerosol Process Study (CHAPS) [ Download Data ] Off Site Campaign : various, including non-ARM sites, 2007.06.04 - 2007.06.25 2008 VAMOS Ocean-Cloud-Atmos-Land Study (VOCALS) [ Download Data ] Off Site Campaign : various, including non-ARM sites, 2008.10.14 - 2008.11.13 Carbonaceous Aerosol and Radiative Effects Study (CARES) [ Download Data ]

191

ARM - Campaign Instrument - cpc  

NLE Websites -- All DOE Office Websites (Extended Search)

govInstrumentscpc govInstrumentscpc Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Campaign Instrument : Condensation Particle Counter (CPC) Instrument Categories Aerosols Campaigns 1998 Phoenix Air Quality Study [ Download Data ] Off Site Campaign : various, including non-ARM sites, 1998.05.17 - 1998.06.09 2007 Cumulus Humilis Aerosol Process Study (CHAPS) [ Download Data ] Off Site Campaign : various, including non-ARM sites, 2007.06.04 - 2007.06.25 2007 Cumulus Humilis Aerosol Process Study (CHAPS) [ Download Data ] Off Site Campaign : various, including non-ARM sites, 2007.06.04 - 2007.06.25 Application of the ARM Mobile Facility (AMF) to Study the Aerosol Indirect Effects in China [ Download Data ] Shouxian, Anhui, China; Mobile Facility, 2008.05.15 - 2008.12.29

192

Instrumentation and diagnostics  

SciTech Connect

This Technology Status Report describes research and accomplishments for the Instrumentation and Diagnostics (I D) Projects within the Advanced Research and Technology Development (AR TD) Program of the United States Department of Energy (DOE) Office of Fossil Energy (FE). Process understanding and control can be improved through the development of advanced instrumentation and diagnostics. The thrust of the I D Projects is to further develop existing measurement and control techniques for application to advanced coal-based technologies. Project highlights are: an inductively coupled plasma (ICP) instrument has been developed to analyze trace elements in gasification and combustion process streams. An in situ two-color Mie scattering technique with LSS can simultaneously measure the size, velocity, and elemental composition of coal particles during combustion. A high-temperature, fluorescence thermometry technique has accurately measured gas temperatures during field testing in combustion and gasification environments. Expert systems have been developed to improve the control of advanced coal-based processes. Capacitance flowmeters were developed to determine the mass flowrate, solid volume fraction, and particle velocities of coal slurries. 32 refs., 9 figs.

Nakaishi, C.V.; Bedick, R.C.

1990-12-01T23:59:59.000Z

193

An ice lithography instrument  

SciTech Connect

We describe the design of an instrument that can fully implement a new nanopatterning method called ice lithography, where ice is used as the resist. Water vapor is introduced into a scanning electron microscope (SEM) vacuum chamber above a sample cooled down to 110 K. The vapor condenses, covering the sample with an amorphous layer of ice. To form a lift-off mask, ice is removed by the SEM electron beam (e-beam) guided by an e-beam lithography system. Without breaking vacuum, the sample with the ice mask is then transferred into a metal deposition chamber where metals are deposited by sputtering. The cold sample is then unloaded from the vacuum system and immersed in isopropanol at room temperature. As the ice melts, metal deposited on the ice disperses while the metals deposited on the sample where the ice had been removed by the e-beam remains. The instrument combines a high beam-current thermal field emission SEM fitted with an e-beam lithography system, cryogenic systems, and a high vacuum metal deposition system in a design that optimizes ice lithography for high throughput nanodevice fabrication. The nanoscale capability of the instrument is demonstrated with the fabrication of nanoscale metal lines.

Han, Anpan [Department of Physics, Harvard University, Cambridge, Massachusetts 02138 (United States); Chervinsky, John [School of Engineering and Applied Sciences, Harvard University, Cambridge, Massachusetts 02138 (United States); Branton, Daniel [Department of Molecular and Cellular Biology, Harvard University, Cambridge, Massachusetts 02138 (United States); Golovchenko, J. A. [Department of Physics, Harvard University, Cambridge, Massachusetts 02138 (United States); School of Engineering and Applied Sciences, Harvard University, Cambridge, Massachusetts 02138 (United States)

2011-06-15T23:59:59.000Z

194

A Benchmark Suite for Evaluating the Performance of the WebODE Ontology Engineering Platform  

E-Print Network (OSTI)

Abstract. Ontology tools play a key role in the development and maintenance of the Semantic Web. Hence, we need in one hand to objectively evaluate these tools, in order to analyse whether they can deal with actual and future requirements, and in the other hand to develop benchmark suites for performing these evaluations. In this paper, we describe the method we have followed to design and implement a benchmark suite for evaluating the performance of the WebODE ontology engineering workbench, along with the conclusions obtained after using this benchmark suite for evaluating WebODE. 1.

Raúl García-castro; Asunción Gómez-pérez

2004-01-01T23:59:59.000Z

195

Rooftop Unit Suite: RTU Challenge, RTU Advanced Controls and RTU Smart Monitoring and Diagnostic System  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Suite of Projects Suite of Projects RTU Suite: RTU Challenge, RTU Advanced Controls and RTU Smart Monitoring and Diagnostic System Michael Brambley, Ph.D. Pacific Northwest National Laboratory Michael.Brambley@pnnl.gov (509) 375-6875 April 4, 2013 2 | Building Technologies Office eere.energy.gov * Packaged air conditioners and heat pumps (RTUs) are used in about 58% of all cooled commercial buildings, serving about 69% of the cooled commercial building floor space (EIA 2003) - Navigant estimates that packaged air conditioners

196

Rooftop Unit Suite: RTU Challenge, RTU Advanced Controls and RTU Smart Monitoring and Diagnostic System  

NLE Websites -- All DOE Office Websites (Extended Search)

Suite of Projects Suite of Projects RTU Suite: RTU Challenge, RTU Advanced Controls and RTU Smart Monitoring and Diagnostic System Michael Brambley, Ph.D. Pacific Northwest National Laboratory Michael.Brambley@pnnl.gov (509) 375-6875 April 4, 2013 2 | Building Technologies Office eere.energy.gov * Packaged air conditioners and heat pumps (RTUs) are used in about 58% of all cooled commercial buildings, serving about 69% of the cooled commercial building floor space (EIA 2003) - Navigant estimates that packaged air conditioners

197

The infrared imaging spectrograph (IRIS) for TMT: on-instrument wavefront sensors and NFIRAOS interface  

E-Print Network (OSTI)

The InfraRed Imaging Spectrograph (IRIS) is a first light client science instrument for the TMT observatory that operates as a client of the NFIRAOS facility multi-conjugate adaptive optics system. This paper reports on the concept study and baseline concept design of the On-Instrument WaveFront Sensors (OIWFS) and NFIRAOS interface subsystems of the IRIS science instrument, a collaborative effort by NRC-HIA, Caltech, and TMT AO and Instrument teams. This includes work on system engineering, structural and thermal design, sky coverage modeling, patrol geometry, probe optics and mechanics design, camera design, and controls design.

Loop, David; Fletcher, Murray; Wooff, Robert; Dunn, Jennifer; Moore, Anna; Smith, Roger; Hale, David; Dekany, Richard; Wang, Lianqi; Ellerbroek, Brent; Simard, Luc; Crampton, David

2010-01-01T23:59:59.000Z

198

Characterizing flows with an instrumented particle measuring Lagrangian accelerations  

E-Print Network (OSTI)

We present in this article a novel Lagrangian measurement technique: an instrumented particle which continuously transmits the force/acceleration acting on it as it is advected in a flow. We develop signal processing methods to extract information on the flow from the acceleration signal transmitted by the particle. Notably, we are able to characterize the force acting on the particle and to identify the presence of a permanent large-scale vortex structure. Our technique provides a fast, robust and efficient tool to characterize flows, and it is particularly suited to obtain Lagrangian statistics along long trajectories or in cases where optical measurement techniques are not or hardly applicable.

Zimmermann, Robert; Gasteuil, Yoann; Volk, Romain; Pinton, Jean-François

2012-01-01T23:59:59.000Z

199

OLENDER REPORTING, INC. 1100 Connecticut Ave., NW, Suite 810, Washington, DC  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

100 Connecticut Ave., NW, Suite 810, Washington, DC 100 Connecticut Ave., NW, Suite 810, Washington, DC 20036 Washington: (202) 898-1108 / Baltimore: (410) 752-3376 Toll Free: (888) 445-3376 1 Electricity Advisory Committee Meeting 8:33 a.m. through 2:49 p.m. October 29, 2010 OLENDER REPORTING, INC. 1100 Connecticut Ave., NW, Suite 810, Washington, DC 20036 Washington: (202) 898-1108 / Baltimore: (410) 752-3376 Toll Free: (888) 445-3376 2 National Rural Electric Cooperative Conference Center 4301 Wilson Boulevard Arlington, VA 22203 OLENDER REPORTING, INC. 1100 Connecticut Ave., NW, Suite 810, Washington, DC 20036 Washington: (202) 898-1108 / Baltimore: (410) 752-3376 Toll Free: (888) 445-3376 3 ELECTRICITY ADVISORY MEMBERS PRESENT: Richard Cowart

200

Development of a mechanical counter pressure Bio-Suit System for planetary exploration  

E-Print Network (OSTI)

Extra-vehicular activity (EVA) is critical for human spaceflight and particularly for human planetary exploration. The MIT Man Vehicle Laboratory is developing a Bio-Suit EVA System, based on mechanical counterpressure ...

Sim, Zhe Liang

2006-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "aos instrument suite" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

DC Pro Software Tool Suite, Data Center Fact Sheet, Industrial Technologies Program  

Science Conference Proceedings (OSTI)

This fact sheet describes how DOE's Data Center Energy Profiler (DC Pro) Software Tool Suite and other resources can help U.S. companies identify ways to improve the efficiency of their data centers.

Not Available

2009-04-01T23:59:59.000Z

202

Fleet-Wide Prognostic and Health Management Suite: Beta Testing Results  

Science Conference Proceedings (OSTI)

The Fleet-Wide Prognostic and Health Management software suite (FW-PHM) is an integrated suite of web-based diagnostic and prognostic tools and databases specifically developed for the Electric Power Research Institute by Expert Microsystems for use in the commercial power industry (both nuclear and fossil fuel). FW-PHM serves as an integrated health management framework, managing the functionality needed for a complete implementation of automated diagnostics and prognostics. The open-architecture ...

2013-05-16T23:59:59.000Z

203

Instrumentation for WEC Testing  

NLE Websites -- All DOE Office Websites (Extended Search)

Ean A. Amon Ean A. Amon Northwest National Marine Renewable Energy Center MHK Instrumentation Workshop, NREL, July 2012 The Northwest National Marine Renewable Energy Center * A partnership between Oregon State University, the University of Washington, & the National Renewable Energy Lab. * Develop a full range of capabilities to support wave and tidal energy development, from small-scale lab and tank systems to full-scale ocean facilities. * Center activities are structured to: * facilitate device commercialization, * inform regulatory and policy decisions, * close key gaps in understanding. Funding for NNMREC is provided by DOE, OSU, UW and multiple partners NNMREC Scaling, Development and Evaluation Resources

204

TMT Science and Instruments  

E-Print Network (OSTI)

To meet the scientific goals of the Thirty Meter Telescope Project, full diffraction-limited performance is required from the outset and hence the entire observatory is being designed, as a system, to achieve this. The preliminary design phases of the telescope and the first light adaptive optic facility are now approaching completion so that much better predictions of the system performance are possible. The telescope design and instrumentation are summarized in this presentation, with a brief description of some of the scientific programs that are foreseen.

David Crampton; Luc Simard; David Silva

2008-01-23T23:59:59.000Z

205

LISA technology and instrumentation  

E-Print Network (OSTI)

This article reviews the present status of the technology and instrumentation for the joint ESA/NASA gravitational wave detector LISA. It briefly describes the measurement principle and the mission architecture including the resulting sensitivity before focussing on a description of the main payload items, such as the interferomtric measurement system, comprising the optical system with the optical bench and the telescope, the laser system, and the phase measurement system; and the disturbance reduction system with the inertial sensor, the charge control system, and the micropropulsion system. The article touches upon the requirements for the different subsystems that need to be fulfilled to obtain the overall sensitivity.

Jennrich, O

2009-01-01T23:59:59.000Z

206

Instrumentation for the Energy Frontier  

E-Print Network (OSTI)

The Instrumentation Frontier was set up as a part of the Snowmass 2013 Community Summer Study to examine the instrumentation R&D needed to support particle physics research over the coming decade. This report summarizes the findings of the Energy Frontier subgroup of the Instrumentation Frontier.

Ulrich Heintz; Daniela Bortoletto; Marcus Hohlmann; Thomas LeCompte; Ron Lipton; Meenakshi Narain; Andrew White

2013-08-31T23:59:59.000Z

207

Geothermal high temperature instrumentation applications  

DOE Green Energy (OSTI)

A quick look at the geothermal industry shows a small industry producing about $1 billion in electric sales annually. The industry is becoming older and in need of new innovative solutions to instrumentation problems. A quick look at problem areas is given along with basic instrumentation requirements. The focus of instrumentation is on high temperature electronics.

Normann, R.A. [Sandia National Labs., Albuquerque, NM (United States); Livesay, B.J. [Livesay Consultants (United States)

1998-06-11T23:59:59.000Z

208

The QUIET Instrument  

Science Conference Proceedings (OSTI)

The Q/U Imaging ExperimenT (QUIET) is designed to measure polarization in the Cosmic Microwave Background, targeting the imprint of inflationary gravitational waves at large angular scales ({approx}1{sup o}). Between 2008 October and 2010 December, two independent receiver arrays were deployed sequentially on a 1.4m side-fed Dragonian telescope. The polarimeters which form the focal planes use a highly compact design based on High Electron Mobility Transistors (HEMTs) that provides simultaneous measurements of the Stokes parameters Q, U, and I in a single module. The 17-element Q-band polarimeter array, with a central frequency of 43.1 GHz, has the best sensitivity (69 {mu}Ks{sup 1/2}) and the lowest instrumental systematic errors ever achieved in this band, contributing to the tensor-to-scalar ratio at r < 0:1. The 84-element W-band polarimeter array has a sensitivity of 87 {mu}Ks{sup 1/2} at a central frequency of 94.5 GHz. It has the lowest systematic errors to date, contributing at r < 0:01. The two arrays together cover multipoles in the range {ell} {approx} 25 -- 975. These are the largest HEMT-based arrays deployed to date. This article describes the design, calibration, performance of, and sources of systematic error for the instrument.

Bischoff, C.; /Chicago U., EFI /Harvard-Smithsonian Ctr. Astrophys.; Brizius, A.; /Chicago U., EFI /Bonn, Max Planck Inst., Radioastron.; Buder, I.; /Chicago U., EFI /Harvard-Smithsonian Ctr. Astrophys.; Chinone, Y.; /KEK, Tsukuba /Tohoku U.; Cleary, K.; /Caltech; Dumoulin, R.N.; /Columbia U., CBA; Kusaka, A.; /Chicago U., EFI /Princeton U.; Monsalve, R.; /Miami U.; Naess, S.K.; /Oslo U.; Newburgh, L.B.; /Columbia U., CBA /Princeton U.; Nixon, G.; /Princeton U. /Caltech

2012-07-01T23:59:59.000Z

209

Instrument Series: Microscopy  

NLE Websites -- All DOE Office Websites (Extended Search)

Quanta 3D FEG Quanta 3D FEG This instrument is now available in EMSL's Radiochemistry Annex. The Quanta 3D FEG is the most versatile high-resolution, low vacuum SEM/FIB for 2D and 3D material characterization and analysis. Featuring three imaging modes - high vacuum, low vacuum and ESEM - it accommodates the widest range of samples of any SEM system. The Quanta 3D FEG's novel, field-emission electron source delivers clear and sharp electron imaging and increased electron beam current enhances EDS and EBSP analysis. This system also offers the capability for in situ study of the dynamic behavior of materials at different humidity levels (up to 100% RH) and temperatures (up to 1500 °C). Quanta 3D FEG's unprecedented high- current FIB enables fast material removal.

210

Instrumented Pipeline Initiative  

Science Conference Proceedings (OSTI)

This report summarizes technical progress achieved during the cooperative agreement between Concurrent Technologies Corporation (CTC) and U.S. Department of Energy to address the need for a for low-cost monitoring and inspection sensor system as identified in the Department of Energy (DOE) National Gas Infrastructure Research & Development (R&D) Delivery Reliability Program Roadmap.. The Instrumented Pipeline Initiative (IPI) achieved the objective by researching technologies for the monitoring of pipeline delivery integrity, through a ubiquitous network of sensors and controllers to detect and diagnose incipient defects, leaks, and failures. This report is organized by tasks as detailed in the Statement of Project Objectives (SOPO). The sections all state the objective and approach before detailing results of work.

Thomas Piro; Michael Ream

2010-07-31T23:59:59.000Z

211

The MICE PID Instrumentation  

E-Print Network (OSTI)

The international Muon Ionization Cooling Experiment (MICE) will carry out a systematic investigation of ionization cooling of a muon beam. As the emittance measurement will be done on a particle-by-particle basis, sophisticated beam instrumentation is needed to measure particle coordinates and timing vs RF. A PID system based on three time-of-flight stations, two Aerogel Cerenkov detectors and a KLOE-like calorimeter has been constructed in order to keep beam contamination ($e, \\pi$) well below 1%. The MICE time-of-flight system will measure timing with a resolution better than 70 ps per plane, in a harsh environment due to high particle rates, fringe magnetic fields and electron backgrounds from RF dark current.

M. Bonesini

2008-10-02T23:59:59.000Z

212

Soldering instrument safety improvements  

DOE Patents (OSTI)

It is an object of the present invention to make soldering instruments safer and easier to use. According to one aspect of the present invention, a non-heatsinking, protective shield is provided around the soldering tip of the solder iron. This heat shield covers the iron`s hot tip throughout the soldering process with the exception of the time needed to perform an actual solder connection using the tip. The shield protects the user or nearby personnel from harm when the soldering iron is at elevated temperatures (500{degrees}F to 800{degrees}F).Moreover, the shield is capable of preventing fires which might result if the iron`s tip inadvertently comes into contact with an object that can be easily ignited, e.g. paper. In addition, an air vacuum system is incorporated into the shield to remove the solder smoke.

Kosslow, W.J.; Giron, R.W.

1994-12-31T23:59:59.000Z

213

ARM - Campaign Instrument - dri-gnd  

NLE Websites -- All DOE Office Websites (Extended Search)

Send Campaign Instrument : Desert Research Institute Ground-Based Aerosol Instruments (DRI-GND) Instrument Categories Aerosols Campaigns Aerosol IOP Download Data Southern...

214

Carbonaceous Aerosol Study Using Advanced Particle Instrumentation  

E-Print Network (OSTI)

Advanced Particle Instrumentation A Dissertation submittedUsing Advanced Particle Instrumentation by Li Qi Doctor ofinto the online instrumentation. In brief, an isokinetic

Qi, Li

2010-01-01T23:59:59.000Z

215

INSTRUMENTATION FOR A RADON RESEARCH HOUSE  

E-Print Network (OSTI)

12564 Extended Summary INSTRUMENTATION FOR A RADON RESEARCHNO. W-7405-ENG-48. INSTRUMENTATION FOR A RADON RESEARCHradon daughters. The system's instrumentation is capable of

Nazaroff, W.W.

2010-01-01T23:59:59.000Z

216

Millimeter-wave polarimetry instrumentation and analysis  

E-Print Network (OSTI)

Society of Photo-Optical Instrumentation Engineers (SPIE)of Photo-Optical Instrumentation Engineers (SPIE) ConferenceWave Polarimetry Instrumentation and Analysis A dissertation

Bierman, Evan M.

2011-01-01T23:59:59.000Z

217

Remote Synchrotron Light Instrumentation Using Optical Fibers  

E-Print Network (OSTI)

et al. , “Fiberoptics-based Instrumentation for Storage RingSYNCHROTRON LIGHT INSTRUMENTATION USING OPTICAL FIBERS * S.beam diagnostic instrumentation that measures longitudinal

De Santis, S.

2010-01-01T23:59:59.000Z

218

The Coherent X-ray Imaging (CXI) Instrument at the Linac Coherent Light Source (LCLS)  

Science Conference Proceedings (OSTI)

The Linac Coherent Light Source (LCLS) has become the first ever operational hard X-ray Free Electron Laser in 2009. It will operate as a user facility capable of delivering unique research opportunities in multiple fields of science. The LCLS and the LCLS Ultrafast Science Instruments (LUSI) construction projects are developing instruments designed to make full use of the capabilities afforded by the LCLS beam. One such instrument is being designed to utilize the LCLS coherent beam to image with high resolution any sub-micron object. This instrument is called the Coherent X-ray Imaging (CXI) instrument. This instrument will provide a flexible optical system capable of tailoring key beam parameters for the users. A suite of shot-to-shot diagnostics will also be provided to characterize the beam on every pulse. The provided instrumentation will include multi-purpose sample environments, sample delivery and a custom detector capable of collecting 2D data at 120 Hz. In this article, the LCLS will be briefly introduced along with the technique of Coherent X-ray Diffractive Imaging (CXDI). A few examples of scientific opportunities using the CXI instrument will be described. Finally, the conceptual layout of the instrument will be presented along with a description of the key requirements for the overall system and specific devices required.

Boutet, Sebastien

2011-08-16T23:59:59.000Z

219

ARM - Instrument - s-table  

NLE Websites -- All DOE Office Websites (Extended Search)

govInstrumentss-table govInstrumentss-table Documentation S-TABLE : Instrument Mentor Monthly Summary (IMMS) reports S-TABLE : Data Quality Assessment (DQA) reports ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Instrument : Stabilized Platform (S-TABLE) Instrument Categories Ocean Observations For ship-based deployments, some instruments require actively stabilized platforms to compensate for the ship's motion, especially rotations around the long axis of the ship (roll), short axis (pitch), and, for some instruments, vertical axis (yaw). ARM currently employs two types of stabilized platforms: one electrically controlled for lighter instruments that includes yaw control (dubbed RPY for Roll, Pitch, Yaw) and one

220

More on Finding a Single Number to Indicate Overall Performance of a Benchmark Suite  

E-Print Network (OSTI)

The topic of finding a single number to summarize overall performance over a benchmark suite is continuing to be a difficult issue 14 years after Smith’s paper [1]. While significant insight into the problem has been provided by Smith [1], Hennessey and Patterson [2], Cragon [3], etc, the research community still seems to be unclear on the correct mean to use for different performance metrics. How should metrics obtained from individual benchmarks be aggregated to present a summary of the performance over the entire suite? What are valid central tendency measures over the whole benchmark suite for speedup, CPI, IPC, MIPS, MFLOPS, cache miss rates, cache hit rates, branch misprediction rates, etc? Arithmetic mean has been touted to be appropriate for

Lizy Kurian John

2004-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "aos instrument suite" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Challenges in Accelerator Beam Instrumentation  

E-Print Network (OSTI)

The challenges in beam instrumentation and diagnostics for present and future particle accelerator projects are presented. A few examples for advanced hadron and lepton beam diagnostics are given.

Wendt, M

2009-01-01T23:59:59.000Z

222

Challenges in Accelerator Beam Instrumentation  

Science Conference Proceedings (OSTI)

The challenges in beam instrumentation and diagnostics for present and future particle accelerator projects are presented. A few examples for advanced hadron and lepton beam diagnostics are given.

Wendt, M.

2009-12-01T23:59:59.000Z

223

Arbin Instruments | Open Energy Information  

Open Energy Info (EERE)

Place College Station, Texas Zip 77845 Product Hi-tech developer and manufacturer of energy storage and energy conversion testing equipment. References Arbin Instruments1...

224

NVLAP Radiation Detection Instruments LAP  

Science Conference Proceedings (OSTI)

Radiation Detection Instruments LAP. Leticia Pibida uses a hand-held radiation detection device to check cargo. Photo: Copyright Robert Rathe. ...

2013-07-23T23:59:59.000Z

225

LANSCE | Lujan Center | Instruments | NPDF  

NLE Websites -- All DOE Office Websites (Extended Search)

articles since the instrument shutter opened in 2002, in fields as diverse as geochemistry, actinide research, complex oxides, bulk metallic glasses, and hydrogen storage...

226

ARM - Campaign Instrument - nrc-convair580  

NLE Websites -- All DOE Office Websites (Extended Search)

Send Campaign Instrument : National Research Council - Canada CONVAIR 580 (NRC-CONVAIR580) Instrument Categories Airborne Observations Campaigns Indirect and...

227

Curtis Instruments | Open Energy Information  

Open Energy Info (EERE)

Curtis Instruments Curtis Instruments Jump to: navigation, search Logo: Curtis Instruments Name Curtis Instruments Address 200 Kisco Ave. Place Mount Kisco, New York Zip 10549 Sector Services Product Electric Vehicle control and instrumentation components Website http://curtisinstruments.com/ Coordinates 41.215661°, -73.726709° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":41.215661,"lon":-73.726709,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

228

On Test Suite Composition and Cost-Effective Regression Testing. Gregg Rothermel  

E-Print Network (OSTI)

On Test Suite Composition and Cost-Effective Regression Testing. Gregg Rothermel , Sebastian Elbaum}@cse.unl.edu August 30, 2003 Abstract Regression testing is an expensive testing process used to re-validate software as it evolves. Various methodologies for improving regression testing processes have been explored, but the cost

Rothermel, Gregg

229

On Test Suite Composition and Cost-Effective Regression Testing Gregg Rothermel  

E-Print Network (OSTI)

On Test Suite Composition and Cost-Effective Regression Testing Gregg Rothermel , Sebastian Elbaum}@cse.unl.edu August 31, 2004 Abstract Regression testing is an expensive testing process used to re-validate software as it evolves. Various methodologies for improving regression testing processes have been explored, but the cost

Rothermel, Gregg

230

Minimizing test suites in software product lines using weight-based genetic algorithms  

Science Conference Proceedings (OSTI)

Test minimization techniques aim at identifying and eliminating redundant test cases from test suites in order to reduce the total number of test cases to execute, thereby improving the efficiency of testing. In the context of software product line, ... Keywords: fault detection capability, feature pairwise coverage, test minimization, weight-based gas

Shuai Wang; Shaukat Ali; Arnaud Gotlieb

2013-07-01T23:59:59.000Z

231

An overview of the HDF5 technology suite and its applications  

Science Conference Proceedings (OSTI)

In this paper, we give an overview of the HDF5 technology suite and some of its applications. We discuss the HDF5 data model, the HDF5 software architecture and some of its performance enhancing capabilities. Keywords: HDF5, data management, data models, databases

Mike Folk; Gerd Heber; Quincey Koziol; Elena Pourmal; Dana Robinson

2011-03-01T23:59:59.000Z

232

Hydrogen Storage Systems Analysis Meeting 955 L'Enfant Plaza North, SW, Suite 6000  

E-Print Network (OSTI)

Hydrogen Storage Systems Analysis Meeting 955 L'Enfant Plaza North, SW, Suite 6000 Washington, DC, 2005 #12;SUMMARY REPORT Hydrogen Storage Systems Analysis Meeting March 29, 2005 955 L'Enfant Plaza was to familiarize the DOE research community involved in hydrogen storage materials and process development

233

VAMPIRE microarray suite: a web-based platform for the interpretation of gene expression data  

E-Print Network (OSTI)

the increased computational load. Since all of these transactions are stored in the VAMPIRE database, no dataVAMPIRE microarray suite: a web-based platform for the interpretation of gene expression data of analysis, collectively known as variance-modeled posterior inference with regional exponentials (VAMPIRE

234

Performance of a MEMS-based AO-OCT system using Fourier Reconstruction  

Science Conference Proceedings (OSTI)

Adaptive optics (AO) and optical coherence tomography (OCT) are powerful imaging modalities that, when combined, can provide high-resolution (3.5 {micro}m isotropic), 3-D images of the retina. The AO-OCT system at UC Davis has demonstrated the utility of this technology for microscopic, volumetric, in vivo retinal imaging. The current system uses an AOptix bimorph deformable mirror (DM) for low-order, high-stroke correction and a 140-actuator Boston Micromachines DM for high-order correction. Developments to improve performance or functionality of the instrument are on-going. Based on previous work in system characterization we have focused on improved AO control. We present preliminary results and remaining challenges for a newly implemented Fourier transform reconstructor (FTR). The previously reported error budget analysis is also reviewed and updated, with consideration of how to improve both the amount of residual error and the robustness of the system. Careful characterization of the AO system will lead to improved performance and inform the design of future systems.

Evans, J; Zawadzki, R; Jones, S; Olivier, S; Werner, J S

2009-01-21T23:59:59.000Z

235

Maoming Zhong ao Wind Power Co Ltd | Open Energy Information  

Open Energy Info (EERE)

Maoming Zhong ao Wind Power Co Ltd Jump to: navigation, search Name Maoming Zhong'ao Wind Power Co Ltd Place Guangdong Province, China Sector Wind energy Product Maoming-based wind...

236

Adjustable extender for instrument module  

DOE Patents (OSTI)

A blank extender module used to mount an instrument module in front of its console for repair or test purposes has been equipped with a rotatable mount and means for locking the mount at various angles of rotation for easy accessibility. The rotatable mount includes a horizontal conduit supported by bearings within the blank module. The conduit is spring-biased in a retracted position within the blank module and in this position a small gear mounted on the conduit periphery is locked by a fixed pawl. The conduit and instrument mount can be pulled into an extended position with the gear clearing the pawl to permit rotation and adjustment of the instrument.

Sevec, J.B.; Stein, A.D.

1975-11-01T23:59:59.000Z

237

Departamento de Ci^encia da Computac~ao IME-USP Segundo Semestre de 2010 MAC 115 Introduc~ao `a Computac~ao IF  

E-Print Network (OSTI)

calculadora mec^anica que realizava somas e subtra¸c~oes. A linguagem de programa¸c~ao Pascal (desenvolvida

Kohayakawa, Yoshiharu

238

Instrumentation of a prestressed concrete containment vessel model  

Science Conference Proceedings (OSTI)

A series of static overpressurization tests of scale models of nuclear containment structures is being conducted by Sandia National Laboratories for the Nuclear Power Engineering Corporation of Japan and the U.S. Nuclear Regulatory Commission. At present, two tests are being planned: a test of a model of a steel containment vessel (SCV) that is representative of an improved, boiling water reactor (BWR) Mark II design; and a test of a model of a prestressed concrete containment vessel (PCCV). This paper discusses plans and the results of a preliminary investigation of the instrumentation of the PCCV model. The instrumentation suite for this model will consist of approximately 2000 channels of data to record displacements, strains in the reinforcing steel, prestressing tendons, concrete, steel liner and liner anchors, as well as pressure and temperature. The instrumentation is being designed to monitor the response of the model during prestressing operations, during Structural Integrity and Integrated Leak Rate testing, and during test to failure of the model. Particular emphasis has been placed on instrumentation of the prestressing system in order to understand the behavior of the prestressing strands at design and beyond design pressure levels. Current plans are to place load cells at both ends of one third of the tendons in addition to placing strain measurement devices along the length of selected tendons. Strain measurements will be made using conventional bonded foil resistance gages and a wire resistance gage, known as a {open_quotes}Tensmeg{close_quotes}{reg_sign} gage, specifically designed for use with seven-wire strand. The results of preliminary tests of both types of gages, in the laboratory and in a simulated model configuration, are reported and plans for instrumentation of the model are discussed.

Hessheimer, M.F.; Rightley, M.J. [Sandia National Labs., Albuquerque, NM (United States); Matsumoto, T. [Nuclear Power Engineering Corp., Tokyo (Japan)] [and others

1995-09-01T23:59:59.000Z

239

Vehicle Technologies Office: ACEM Instrument Achieves Significant  

NLE Websites -- All DOE Office Websites (Extended Search)

ACEM Instrument Achieves ACEM Instrument Achieves Significant Performance Milestone to someone by E-mail Share Vehicle Technologies Office: ACEM Instrument Achieves Significant Performance Milestone on Facebook Tweet about Vehicle Technologies Office: ACEM Instrument Achieves Significant Performance Milestone on Twitter Bookmark Vehicle Technologies Office: ACEM Instrument Achieves Significant Performance Milestone on Google Bookmark Vehicle Technologies Office: ACEM Instrument Achieves Significant Performance Milestone on Delicious Rank Vehicle Technologies Office: ACEM Instrument Achieves Significant Performance Milestone on Digg Find More places to share Vehicle Technologies Office: ACEM Instrument Achieves Significant Performance Milestone on AddThis.com... ACEM Instrument Achieves Significant Performance Milestone

240

3-2 Instrument Development Laboratory  

NLE Websites -- All DOE Office Websites (Extended Search)

* Tailor work to suit the needs of the EMSL scientific community * Maintain code modules (controls) within a library that holds both commercially and locally developed software...

Note: This page contains sample records for the topic "aos instrument suite" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

4-ID-D Instrumentation  

NLE Websites -- All DOE Office Websites (Extended Search)

4-ID-D Instrumentation Detectors Integrating Counting Area Diffractometors 8-Circle 4Tesla Magnet 13 Tesla Magnet Focussing Zone Plate Optics K-B Mirror System Temperature Control...

242

Instrumented architectural level emulation technology  

Science Conference Proceedings (OSTI)

The advent of general purpose emulators as tools for computer architecture research and system development is briefly traced. The concepts of an architectural level emulation and of instrumenting an emulation are introduced. An operational emulation-based ...

Harrison R. Burris

1977-06-01T23:59:59.000Z

243

EMSL: Capabilities: Instrument Development Laboratory  

NLE Websites -- All DOE Office Websites (Extended Search)

Instrument Development Laboratory Instrument Development Laboratory The mission of the Instrument Development Laboratory (IDL) is to design, develop, and deploy advanced state-of-the-art instrument systems and custom application software in support of the ongoing experimental research efforts within EMSL. IDL staff design and develop much of the custom hardware and software used at EMSL, and provide the critical support necessary to rapidly modify or adapt a user's system to help the user achieve the world-class results they expect at EMSL. Additional Information IDL Home Meet the IDL Experts IDL Innovations IDL Brochure IDL staff provide electrical engineering expertise in high-voltage, radiofrequency, and high-speed analog and digital systems; digital signaling processing and FPGA technology; and rapid prototyping. In

244

A Review of VLBI Instrumentation  

E-Print Network (OSTI)

The history of VLBI is summarized with emphasis on the technical aspects. A summary of VLBI systems which are in use is given, and an outlook to the future of VLBI instrumentation.

W. Alef

2004-12-13T23:59:59.000Z

245

LUSI :: LCLS Ultrafast Science Instruments  

NLE Websites -- All DOE Office Websites (Extended Search)

Go Home Project Pages LUSI Instruments Uniqueness of FEL X-rays X-ray FEL Science About LCLS Science with LCLS Calendar & Meetings Contact Us Office of ScienceU.S. DOE Current...

246

ARM - Campaign Instrument - sp2  

NLE Websites -- All DOE Office Websites (Extended Search)

(SP2) Instrument Categories Aerosols Campaigns Carbonaceous Aerosol and Radiative Effects Study (CARES) Download Data McClellan AFB, Sacramento, CA, 2010.06.02 - 2010.06.28...

247

Instrumentness for creativity mediation, materiality & metonymy  

Science Conference Proceedings (OSTI)

We introduce the concept instrumentness as a quality of human-computer interfaces. Instrumentness points to the way musical instruments are controlled and conceptualized through values such as virtuosity and playability, which are important for computer-mediated ... Keywords: activity theory, computer mediated creativity, instrumental interactions, instrumentness, interface aesthetics, materiality, mediation, metonymy, music composition

Olav W. Bertelsen; Morten Breinbjerg; Søren Pold

2007-06-01T23:59:59.000Z

248

Instrumentation for Increased Power Flow  

Science Conference Proceedings (OSTI)

This report is the second Technical Update of the Instrumentation for Managing Increased Power Flow project, part of EPRI's Increased Power Flow (IPF) program. The project, initiated in 2006 and expected to continue for several years, studies the feasibility of new instrumentation to support increased power flow strategies. In 2007 the work focused on two primary developments: the Backscatter Sensor for the real-time measurement of transmission line temperature and current and the Emissivity Test Instrum...

2007-12-06T23:59:59.000Z

249

A.: Defining a benchmark suite for evaluating the import of OWL lite ontologies  

E-Print Network (OSTI)

Abstract. Semantic Web tools should be able to correctly interchange ontologies and, therefore, to interoperate. This interchange is not always a straightforward task if tools have different underlying knowledge representation paradigms. This paper describes the process followed to define a benchmark suite for evaluating the OWL import capabilities of ontology development tools in a benchmarking activity in progress in the Knowledge Web 1 European Network of Excellence. 1

Stefano David; Raúl García-castro; Asunción Gómez-pérez

2006-01-01T23:59:59.000Z

250

Towards the Integration of APECS and VE-Suite for Virtual Power Plant Co-Simulation  

SciTech Connect

Process modeling and simulation tools are widely used for the design and operation of advanced power generation systems. These tools enable engineers to solve the critical process systems engineering problems that arise throughout the lifecycle of a power plant, such as designing a new process, troubleshooting a process unit or optimizing operations of the full process. To analyze the impact of complex thermal and fluid flow phenomena on overall power plant performance, the Department of Energy’s (DOE) National Energy Technology Laboratory (NETL) has developed the Advanced Process Engineering Co-Simulator (APECS). The APECS system is an integrated software suite that combines process simulation (e.g., Aspen Plus) and high-fidelity equipment simulations such as those based on computational fluid dynamics (CFD), together with advanced analysis capabilities including case studies, sensitivity analysis, stochastic simulation for risk/uncertainty analysis, and multi-objective optimization. In this paper we discuss the initial phases of the integration of the APECS system with the immersive and interactive virtual engineering software, VE-Suite, developed at Iowa State University and Ames Laboratory. VE-Suite uses the ActiveX (OLE Automation) controls in the Aspen Plus process simulator wrapped by the CASI library developed by Reaction Engineering International to run process/CFD co-simulations and query for results. This integration represents a necessary step in the development of virtual power plant co-simulations that will ultimately reduce the time, cost, and technical risk of developing advanced power generation systems.

Zitney, S.E.; McCorkle, D. (Iowa State University, Ames, IA); Yang, C. (Reaction Engineering International, Salt Lake City, UT); Jordan, T.; Swensen, D. (Reaction Engineering International, Salt Lake City, UT); Bryden, M. (Iowa State University, Ames, IA)

2007-05-01T23:59:59.000Z

251

Fossil Plant Instrumentation and Control Guidelines  

Science Conference Proceedings (OSTI)

This report summarizes an earlier study performed on instrument calibration analysis and will serve as a guideline for performing statistical analysis of instrument calibration data for plants that desire to monitor and improve instrument performance.

2008-12-23T23:59:59.000Z

252

Black suit with a white, button down, collared dress shirt and conservative tie Black socks and black shoes  

E-Print Network (OSTI)

Dress Code Men · Black suit with a white, button down, collared dress shirt and conservative tie · Black socks and black shoes Women · Black dress, black suit pant or skirt (dress or skirt must be at or below the knee) · Black hose (without pattern) and black dress shoes MSC OPAS provides: · A volunteer

Boas, Harold P.

253

Readiness Issues for Emergency Response Instrumentation  

Science Conference Proceedings (OSTI)

Issues in maintaining readiness of instruments for deployment and use in emergency response situation often differ from those in maintaining instruments for normal operations. Confunding circumstances include use of non-availability of check sources, ensuring instruments are always in calibration and operable, possible use of instruments in different climates, packaging of instrumentation for deployment, transport of instrumentation and check sources, and ensuring users are familiar with instruments. Methods and procedures for addressing these issues are presented. Instrumentation used for survey, in situ measurements, electronic dosimetry, and air conditioning are discussed.

C.A. Riland; D.R. Bowman; R.J. Tighe

1999-03-01T23:59:59.000Z

254

Data Collection Computers Instrument Control Program (ICP)  

Science Conference Proceedings (OSTI)

... once whenever a controller is connected to the instrument. ... used at the polarized beam instruments each have ... do not operate the controls by hand. ...

255

Instrumented SSH on NERSC Systems  

NLE Websites -- All DOE Office Websites (Extended Search)

Security » Instrumented SSH Security » Instrumented SSH Instrumented SSH on NERSC Systems NERSC uses a modified version of SSH on all of our systems that allows us to record and analyze the content of interactive SSH sessions. Why are We Doing This? Credential theft represents the single greatest threat to security here at NERSC. We are addressing this problem by analyzing user command activity and looking for behavior that is recognizably hostile. Until SSH came into widespread use, it was trivial to monitor login sessions and analyze them for mischievous activity. Furthermore, this kind of intrusion detection proved to be very effective with few "false positives". Using this version of SSH at NERSC, we are simply recovering that capability. However, we recognize the importance of being candid about

256

ARM - Instrument - co2flx  

NLE Websites -- All DOE Office Websites (Extended Search)

govInstrumentsco2flx govInstrumentsco2flx Documentation CO2FLX : Handbook CO2FLX : Instrument Mentor Monthly Summary (IMMS) reports CO2FLX : Data Quality Assessment (DQA) reports ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Instrument : Carbon Dioxide Flux Measurement Systems (CO2FLX) Instrument Categories Atmospheric Carbon General Overview The Southern Great Plains (SGP) carbon dioxide flux (CO2 flux) measurement systems provide half-hour average fluxes of CO2, H2O (latent heat), and sensible heat. The fluxes are obtained by the eddy covariance technique, which computes the flux as the mean product of the vertical wind component with CO2 and H2O densities, or estimated virtual temperature. A three-dimensional sonic anemometer is used to obtain the orthogonal wind

257

Leiderdorp Instruments | Open Energy Information  

Open Energy Info (EERE)

Leiderdorp Instruments Leiderdorp Instruments Jump to: navigation, search Name Leiderdorp Instruments Place Leiderdorp, Netherlands Zip NL2350 Sector Solar Product Leiderdorp designs electronics hardware and software, including output monitoring devices for PV and solar passive systems. Coordinates 52.156174°, 4.534218° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":52.156174,"lon":4.534218,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

258

HTGR Measurements and Instrumentation Systems  

SciTech Connect

This report provides an integrated overview of measurements and instrumentation for near-term future high-temperature gas-cooled reactors (HTGRs). Instrumentation technology has undergone revolutionary improvements since the last HTGR was constructed in the United States. This report briefly describes the measurement and communications needs of HTGRs for normal operations, maintenance and inspection, fuel fabrication, and accident response. The report includes a description of modern communications technologies and also provides a potential instrumentation communications architecture designed for deployment at an HTGR. A principal focus for the report is describing new and emerging measurement technologies with high potential to improve operations, maintenance, and accident response for the next generation of HTGRs, known as modular HTGRs, which are designed with passive safety features. Special focus is devoted toward describing the failure modes of the measurement technologies and assessing the technology maturity.

Ball, Sydney J [ORNL; Holcomb, David Eugene [ORNL; Cetiner, Mustafa Sacit [ORNL

2012-05-01T23:59:59.000Z

259

Advanced Light Source instrumentation overview  

Science Conference Proceedings (OSTI)

The accelerator instrumentation played a vital role in commissioning the ALS injector accelerator. It helped us to see whether electron dynamics agreed with our theoretical predictions and important beam parameters met the design specifications. It helped us to see where beam losses occurred and why. In this paper we will start with a brief description of the ALS accelerator complex and the expected performance of it. Then we will describe each diagnostics instrument by its construction, operational principle, requirements, and our experiences with it. We will describe the wall current monitor, the scintillator, the Faraday cup, the beam collimator, the beam position monitor, the direct-current current transformer (DCCT), the traveling wave electrodes the Sabersky finger, and other special instruments. Finally, we will go into some detail on how we measured the beam emittances, the closed orbit, and the betatron tunes.

Kim, C.H.; Hinkson, J.

1992-10-01T23:59:59.000Z

260

ARM AOS Processing Status and Aerosol Intensive Properties VAP  

NLE Websites -- All DOE Office Websites (Extended Search)

Andrews, and P. J. Sheridan National Oceanic and Atmospheric Administration Boulder, Colorado Abstract The Atmospheric Radiation Measurement (ARM) Aerosol Observing System (AOS)...

Note: This page contains sample records for the topic "aos instrument suite" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Bio-SANS Instrument Team | ORNL Neutron Sciences  

NLE Websites -- All DOE Office Websites (Extended Search)

Instrument Team Instrument team Bio-SANS Team (left to right): Qiu Zhang, Student Volker Urban, Lead Instrument Scientist Sai Venkatesh Pingali, Instrument Scientist Shuo Qian,...

262

Benchmark suites for improving the RDF(S) importers and exporters of ontology development tools  

E-Print Network (OSTI)

Abstract. Interoperability is the ability of two or more systems to interchange information and to use the information that has been interchanged. Nowadays, interoperability between ontology development tools is low. Therefore, to assess and improve this interoperability, we propose to perform a benchmarking of the interoperability of ontology development tools using RDF(S) as the interchange language. This paper presents, on the one hand, the interoperability benchmarking that is currently in progress in Knowledge Web 1 and, on the other, the benchmark suites defined and used in this benchmarking. 1

Raúl García-castro; Asunción Gómez-pérez

2006-01-01T23:59:59.000Z

263

The Instrument Development Group MACS Detector System ...  

Science Conference Proceedings (OSTI)

Page 1. The Instrument Development Group Bloomberg Center for Physics & Astronomy · Johns Hopkins University · Baltimore · Maryland ...

2002-02-25T23:59:59.000Z

264

International Conference Synchrotron Radiation Instrumentation SRI `94  

SciTech Connect

This report contains abstracts for the international conference on Synchrotron Radiation Instrumentation at Brookhaven National Laboratory.

Not Available

1994-10-01T23:59:59.000Z

265

Goodwill Instrument | Open Energy Information  

Open Energy Info (EERE)

Goodwill Instrument Goodwill Instrument Jump to: navigation, search Logo: Goodwill Instrument Name Goodwill Instrument Address No.7-1, Jhongsing Road., Place Tucheng Dist., New Taipei City Zip 236 Sector Efficiency, Solar Product Electronic Load, DC Power Supply, AC Power Supply, Oscilloscope, Digital Multi-Meter, Spectrum Analyzer Stock Symbol 2423 TPE 2423 Year founded 1975 Number of employees 501-1000 Phone number +886 2 22680389 Website http://www.goodwill.com.tw Coordinates 24.964545035469°, 121.42334461212° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":24.964545035469,"lon":121.42334461212,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

266

Vacuum Enhanced Cutaneous Biopsy Instrument  

DOE Patents (OSTI)

A syringe-like disposable cutaneous biopsy instrument equipped with a tubular blade at its lower end, and designed so that a vacuum is created during use, said vacuum serving to retain undeformed a plug of tissue cut from a patient's skin.

Collins, Joseph

1999-06-25T23:59:59.000Z

267

Instruments  

Science Conference Proceedings (OSTI)

... 04. 217, 155, 25.1, 41.4, 4.175, 4.067, 0.098, 4745, 9.82E+04. 218, 156, 24.7, 41.4, 4.178, 4.072, 0.08, 4982, 1.03E+05. 219, 157, ...

2011-05-07T23:59:59.000Z

268

Instrumentation  

E-Print Network (OSTI)

In this course, given at the school in 3 parts of 75 minutes each, we will discuss the physics of particle detection, the basic designs and working principles of detectors, and, as an example with more details, some detectors for particle identification.

Jurgen Engelfried

2003-12-10T23:59:59.000Z

269

Wastewater treatment plant instrumentation handbook. Final report  

Science Conference Proceedings (OSTI)

Instruments are required for proper operation of wastewater plants. To be of use the instruments must be operable and maintainable. This requires care in the selection, application and installation of instruments and control equipment. Contents of the handbook address the how-to of designing and applying instrumentation and controls for waste treatment operations. Special focus is given to problems, causes and solutions. The handbook covers instruments, valves and pumps commonly used in wastewater plants.

Manross, R.C.

1985-09-01T23:59:59.000Z

270

Suite of Activity-Based Probes for Cellulose-Degrading Enzymes  

Science Conference Proceedings (OSTI)

Microbial glycoside hydrolases play a dominant role in the biochemical conversion of cellulosic biomass to high-value biofuels. Anaerobic cellulolytic bacteria are capable of producing multicomplex catalytic subunits containing cell-adherent cellulases, hemicellulases, xylanases, and other glycoside hydrolases to facilitate the degradation of highly recalcitrant cellulose and other related plant cell wall polysaccharides. Clostridium thermocellum is a cellulosome producing bacterium that couples rapid reproduction rates to highly efficient degradation of crystalline cellulose. Herein, we have developed and applied a suite of difluoromethylphenyl aglycone, N-halogenated glycosylamine, and 2-deoxy-2-fluoroglycoside activity-based protein profiling (ABPP) probes to the direct labeling of the C. thermocellum cellulosomal secretome. These activity-based probes (ABPs) were synthesized with alkynes to harness the utility and multimodal possibilities of click chemistry, and to increase enzyme active site inclusion for LC-MS analysis. We directly analyzed ABP-labeled and unlabeled global MS data, revealing ABP selectivity for glycoside hydrolase (GH) enzymes in addition to a large collection of integral cellulosome-containing proteins. By identifying reactivity and selectivity profiles for each ABP, we demonstrate our ability to widely profile the functional cellulose degrading machinery of the bacterium. Derivatization of the ABPs, including reactive groups, acetylation of the glycoside binding groups, and mono- and disaccharide binding groups, resulted in considerable variability in protein labeling. Our probe suite is applicable to aerobic and anaerobic cellulose degrading systems, and facilitates a greater understanding of the organismal role associated within biofuel development.

Chauvigne-Hines, Lacie M.; Anderson, Lindsey N.; Weaver, Holly M.; Brown, Joseph N.; Koech, Phillip K.; Nicora, Carrie D.; Hofstad, Beth A.; Smith, Richard D.; Wilkins, Michael J.; Callister, Stephen J.; Wright, Aaron T.

2012-12-19T23:59:59.000Z

271

LANSCE | Lujan Center | Instruments | HIPD  

NLE Websites -- All DOE Office Websites (Extended Search)

Intensity Powder Diffractometer | HIPD Intensity Powder Diffractometer | HIPD Local Structure, Magnetism, and Nanomaterials HIPD is a high intensity and medium resolution powder diffractometer designed for studies on the atomic and magnetic structure of crystalline and non-crystalline powders and local structure analysis (PDF) studies. High counting rates are achieved thanks to the proximity to the neutron source (primary flight path = 9 m). The beam size at the sample position is 1 cm wide and 5 cm high and collimation may be added to support small sample volumes and specialized ancillary equipment. HIPD detectors are located at ± 153°, ± 90°, ± 40° and ± 14°, each covering ± 5°, which allows over 2 decades of momentum transfer (0.2 - 60 Å-1). HIPD is specially suited for magnetic diffraction, magnetic and crystalline phase

272

An AOTF-LDTOF spectrometer suite for in situ organic detection and characterization  

Science Conference Proceedings (OSTI)

We discuss the development of a miniature near-infrared point spectrometer, operating in the 1.7 -- 4 mm region, based on acousto-optic tunable filter (AOTF) technology. This instrument may be used to screen and corroborate analyses of samples containing ...

Nancy J. Chanover; David A. Glenar; David G. Voelz; Xifeng Xiao; Rula Tawalbeh; Penelope J. Boston; William B. Brinckerhoff; Paul R. Mahaffy; Stephanie Getty; Inge ten Kate; Amy McAdam

2011-03-01T23:59:59.000Z

273

Nuclear instrumentation cable end seal  

DOE Patents (OSTI)

An improved coaxial end seal for hermetically sealed nuclear instrumentation cable exhibiting an improved breakdown pulse noise characteristic under high voltage, high temperature conditions. A tubular insulator body has metallized interior and exterior surface portions which are braze sealed to a center conductor and an outer conductive sheath. The end surface of the insulator body which is directed toward the coaxial cable to which it is sealed has a recessed surface portion within which the braze seal material terminates.

Cannon, Collins P. (Richland, WA); Brown, Donald P. (Richland, WA)

1979-01-01T23:59:59.000Z

274

Instrumentation, Controls, and Automation Newsletter  

Science Conference Proceedings (OSTI)

This is the first newsletter for the Instrumentation, Controls, and Automation program of EPRI. This newsletter summarizes results of past and current projects and provides an overview of projects that will be completed in 2010. The first article describes the recently prototyped software Asset Fault Signature Database. The second article, "Inter-Control Center Communications Protocol Benefits Assessment," describes a previously completed EPRI/Southern Company tailored collaboration project. "Survey of C...

2009-12-22T23:59:59.000Z

275

High-temperature borehole instrumentation  

DOE Green Energy (OSTI)

A new method of extracting natural heat from the earth's crust was invented at the Los Alamos National Laboratory in 1970. It uses fluid pressures (hydraulic fracturing) to produce cracks that connect two boreholes drilled into hot rock formations of low initial permeability. Pressurized water is then circulated through this connected underground loop to extract heat from the rock and bring it to the surface. The creation of the fracture reservior began with drilling boreholes deep within the Precambrian basement rock at the Fenton Hill Test Site. Hydraulic fracturing, flow testing, and well-completion operations required unique wellbore measurements using downhole instrumentation systems that would survive the very high borehole temperatures, 320/sup 0/C (610/sup 0/F). These instruments were not available in the oil and gas industrial complex, so the Los Alamos National Laboratory initiated an intense program upgrading existing technology where applicable, subcontracting materials and equipment development to industrial manufactures, and using the Laboratory resource to develop the necessary downhole instruments to meet programmatic schedules. 60 refs., 11 figs.

Dennis, B.R.; Koczan, S.P.; Stephani, E.L.

1985-10-01T23:59:59.000Z

276

FAQS Job Task Analyses - Instrument and Controls  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

or Working Level Competencies or Working Level Competencies DOE-STD-1162, Instrument & Controls Functional Area Qualification Standard (FAQS) September 2010 STEP 1: Job Task Analysis for Tasks associated with Instrument & Controls Task Source Importance Frequency One: Serve as a subject matter expert and technical resource for instrumentation and control systems. Inspect and evaluate instrumentation and control systems for safe and efficient operation, maintenance, and testing. DOE-STD-1162 Duties and Responsibilities Items B and C 3 2 Two: Review and assess authorization basis documentation. Evaluate instrumentation and control system conformity to authorization basis documentation and other design basis documents. Audit facility instrumentation and control

277

DOE-STD-1167-2003; Respiratory Acceptance Program for Supplied-Air Suits  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

NOT MEASUREMENT SENSITIVE DOE-STD-1167-2003 OCTOBER 2003 DOE STANDARD THE DEPARTMENT OF ENERGY RESPIRATORY ACCEPTANCE PROGRAM FOR SUPPLIED-AIR SUITS U.S. Department of Energy AREA SAFT Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from ES&H Technical Information Services, U.S. Department of Energy, (800) 473-4375, fax: (301) 903-9823. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 605-6000. ii DOE-STD-1167-2003 FOREWORD This non-mandatory Technical Standard provides the Department of Energy (DOE) and contractor

278

PUBLIC ACCESS: 955 LEnfant Plaza North, SW, Suite 1500, Washington, DC  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

10 10 th Meeting Ultra-Deepwater Advisory Committee July 15, 2009, 8:00 a.m. EASTERN, WebEx/Conference Call Meeting PUBLIC ACCESS: 955 L'Enfant Plaza North, SW, Suite 1500, Washington, DC AGENDA 7:30 Registration; Begin Member call in 8:00 Call to Order - Welcome Arnis Judzis, Vice-Chair Member Roll Call and the presence of a quorum Elena Melchert, Committee Manager Meeting purpose and review of the agenda; Insights regarding future funding and other pending legislation; Draft 2010 Annual Plan delivery, and pending meetings in September and October 2009 Guido DeHoratiis Designated Federal Officer 8:25 Report from the Standing Subcommittee regarding Process; Member Q/A and Discussion Mary Jane Wilson

279

Report Period: EIA ID NUMBER: Instructions: (e.g., Street Address, Bldg, Floor, Suite)  

U.S. Energy Information Administration (EIA) Indexed Site

Report Period: Report Period: EIA ID NUMBER: Instructions: (e.g., Street Address, Bldg, Floor, Suite) Secure File Transfer option available at: (e.g., PO Box, RR) Electronic Transmission: The PC Electronic Data Reporting Option (PEDRO) is available. Zip Code: - If interested in software, call (202) 586-9659. Email form to: Fax form to: (202) 586-9772 - - Mail form to: Oil & Gas Survey - - U.S. Department of Energy Ben Franklin Station PO Box 279 Washington, DC 20044-0279 Questions? Call toll free: 1-800-638-8812 OOG.SURVEYS@eia.doe.gov Contact Name: Version No.: 2013.01 Date of this Report: Mo Day State: Year Phone No.: DOMESTIC CRUDE OIL FIRST PURCHASE REPORT Company Name: A completed form must be filed by the 30th calendar day following the end of the report

280

PUBLIC ACCESS: 955 LEnfant Plaza North, SW, Suite 1500, Washington, DC  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

th th Meeting Unconventional Resources Technology Advisory Committee July 14, 2009 1:00 p.m. EASTERN WebEx/Conference Call Meeting PUBLIC ACCESS: 955 L'Enfant Plaza North, SW, Suite 1500, Washington, DC AGENDA 12:30 Registration; Begin call in to 800-number and login to WebEx Members, Chair, Designated Federal Officer, and Committee Manager 1:00 Call to Order - Welcome Chris Hall, Committee Chair Member Roll Call and the presence of a quorum Elena Melchert Committee Manager Meeting purpose and review of the agenda; Insights regarding future funding and other pending legislation; Draft 2010 Annual Plan delivery, and pending meetings in September and October 2009 Guido DeHoratiis Designated Federal Officer 1:25 Report from the Standing Subcommittee and

Note: This page contains sample records for the topic "aos instrument suite" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

An Expert Elicitation Based Study of the Proliferation Resistance of a Suite of Nuclear Power Plants  

Science Conference Proceedings (OSTI)

In 2008, a multi-laboratory research team completed a study evaluating the proliferation resistance (PR) characteristics of a diverse suite of four advanced nuclear reactor designs. The systems evaluated included: • a light water reactor (a pressurized-water reactor), • a heavy water reactor, • a high temperature gas reactor (with a prismatic-block reactor core), • a sodium-cooled fast reactor. The team used an expert elicitation assessment approach based on the Generation IV International Forum (GIF) Proliferation Resistance and Physical Protection (PR&PP) methodology. The team evaluated three general types of proliferation threats: 1) concealed diversion of material, 2) concealed misuse of the reactor to produce material, and 3) breakout. The evaluations took into account the intrinsic PR characteristics of each reactor and the extrinsic PR characteristics provided by generic safeguards the team considered appropriate for each reactor, based on the team’s experience and available conceptual design information.

Zentner, Michael D.; Therios, Ike; Bari, Robert A.; Cheng, Lap; Yue, Meng; Wigeland, Roald; Hassberger, Jim; Boyer, Brian; Pilat, Joseph

2010-08-11T23:59:59.000Z

282

Ruptured Internal Iliac Artery Aneurysm: Staged Emergency Endovascular Treatment in the Interventional Radiology Suite  

SciTech Connect

Ruptured aneurysms of the internal iliac artery (IIA) are rare and challenging to treat surgically. Due to their anatomic location they are difficult to operate on and perioperative morbidity is high. An endovascular approach can be helpful. We recently treated a patient with a ruptured IIA aneurysm in the interventional radiology suite with embolization of the side-branch of the IIA and placement of a covered stent in the ipsilateral common and external iliac arteries. A suitable stent-graft was not available initially and had to be brought in from elsewhere. An angioplasty balloon was temporarily placed across the ostium of the IIA to obtain hemostasis. Two hours later, the procedure was finished by placing the stent-graft.

Kelckhoven, Bas-Jeroen van [HagaZiekenhuis, Location Leyenburg, Department of Radiology (Netherlands)], E-mail: bjvankelckhoven@hotmail.com; Bruijninckx, Boy M. A.; Knippenberg, Bob [HagaZiekenhuis, Location Leyenburg, Department of Surgery (Netherlands); Overhagen, Hans van [HagaZiekenhuis, Location Leyenburg, Department of Radiology (Netherlands)

2007-07-15T23:59:59.000Z

283

Developing a Comprehensive Software Suite for Advanced Reactor Performance and Safety Analysis  

SciTech Connect

This paper provides an introduction to the reactor analysis capabilities of the nuclear power reactor simulation tools that are being developed as part of the U.S. Department of Energy s Nuclear Energy Advanced Modeling and Simulation (NEAMS) Toolkit. The NEAMS Toolkit is an integrated suite of multi-physics simulation tools that leverage high-performance computing to reduce uncertainty in the prediction of performance and safety of advanced reactor and fuel designs. The Toolkit effort is comprised of two major components, the Fuels Product Line (FPL), which provides tools for fuel performance analysis, and the Reactor Product Line (RPL), which provides tools for reactor performance and safety analysis. This paper provides an overview of the NEAMS RPL development effort.

Pointer, William David [ORNL; Bradley, Keith S [ORNL; Fischer, Paul F [ORNL; Smith, Micheal A [ORNL; Tautges, Timothy J [ORNL; Ferencz, Robert M [ORNL; Martineau, Richard C [ORNL; Jain, Rajeev [ORNL; Obabko, Aleksandr [Argonne National Laboratory (ANL); Billings, Jay Jay [ORNL

2013-01-01T23:59:59.000Z

284

Social instruments for robust convention emergence  

Science Conference Proceedings (OSTI)

We present the notion of Social Instruments as mechanisms that facilitate the emergence of conventions from repeated interactions between members of a society. Specifically, we focus on two social instruments: rewiring and observation. Our main goal ...

Daniel Villatoro; Jordi Sabater-Mir; Sandip Sen

2011-07-01T23:59:59.000Z

285

ARM - Campaign Instrument - cm-sonde  

NLE Websites -- All DOE Office Websites (Extended Search)

from you Send us a note below or call us at 1-888-ARM-DATA. Send Campaign Instrument : Chilled Mirror Sonde (CM-SONDE) Instrument Categories Atmospheric Profiling Campaigns...

286

ARM - Campaign Instrument - cm-cryo  

NLE Websites -- All DOE Office Websites (Extended Search)

Send us a note below or call us at 1-888-ARM-DATA. Send Campaign Instrument : Cryogenic Chilled Mirror Hygrometer (CM-CRYO) Instrument Categories Atmospheric Profiling, Airborne...

287

ARM - Campaign Instrument - tethersonde-cm  

NLE Websites -- All DOE Office Websites (Extended Search)

us a note below or call us at 1-888-ARM-DATA. Send Campaign Instrument : Tethersonde With Chilled Mirror (TETHERSONDE-CM) Instrument Categories Atmospheric Profiling, Airborne...

288

ARM - Campaign Instrument - wrf-chem  

NLE Websites -- All DOE Office Websites (Extended Search)

below or call us at 1-888-ARM-DATA. Send Campaign Instrument : Weather Research and Forecasting (WRF) Model Output (WRF-CHEM) Instrument Categories Surface Meteorology, Derived...

289

Airplane Instrument to Detect Ice Particles  

Science Conference Proceedings (OSTI)

A simple instrument that detects ice particles has been developed for use in airplane studies of thunderstorms. Although sophisticated instruments are available for imaging atmospheric ice particles, the spatial resolution of the particle ...

J. J. Jones; C. Grotbeck; B. Vonnegut

1989-08-01T23:59:59.000Z

290

Turbulence Measurement with a Moored Instrument  

Science Conference Proceedings (OSTI)

A new autonomous and moored microstructure measuring instrument has been tested in coastal waters. The instrument measures shear in the dissipation range of the wavenumber spectrum using four shear probes; temperature fluctuations using two FP-07 ...

R. G. Lueck; D. Huang; D. Newman; J. Box

1997-02-01T23:59:59.000Z

291

ARM - Campaign Instrument - lidar-dial  

NLE Websites -- All DOE Office Websites (Extended Search)

you Send us a note below or call us at 1-888-ARM-DATA. Send Campaign Instrument : Dial Lidar (LIDAR-DIAL) Instrument Categories Aerosols, Atmospheric Profiling Campaigns ARM-FIRE...

292

ARM - Campaign Instrument - co2lidar  

NLE Websites -- All DOE Office Websites (Extended Search)

lidar Comments? We would love to hear from you Send us a note below or call us at 1-888-ARM-DATA. Send Campaign Instrument : Carbon Dioxide Doppler Lidar (CO2LIDAR) Instrument...

293

Target Diagnostic Instrument-Based Controls Framework for the National Ignition Facility (NIF)  

Science Conference Proceedings (OSTI)

The extreme physics of targets shocked by NIF's 192-beam laser are observed by a diverse suite of diagnostics including optical backscatter, time-integrated and gated X-ray sensors, and laser velocity interferometry. Diagnostics to diagnose fusion ignition implosion and neutron emissions are being planned. Many diagnostics will be developed by collaborators at other sites, but ad hoc controls could lead to unreliable and costly operations. An instrument-based controls (I-BC) framework for both hardware and software facilitates development and eases integration. Each complex diagnostic typically uses an ensemble of electronic instruments attached to sensors, digitizers, cameras, and other devices. In the I-BC architecture each instrument is interfaced to a low-cost Windows XP processor and Java application. Each instrument is aggregated with others as needed in the supervisory system to form an integrated diagnostic. The Java framework provides data management, control services and operator GUI generation. I-BCs are reusable by replication and reconfiguration for specific diagnostics in XML. Advantages include minimal application code, easy testing, and better reliability. Collaborators save costs by assembling diagnostics with existing I-BCs. This paper discusses target diagnostic instrumentation used on NIF and presents the I-BC architecture and framework.

Shelton, R T; O'Brien, D W; Kamperschroer, J H; Nelson, J R

2007-10-03T23:59:59.000Z

294

Sensors and Instrumentation and Nondestructive Evaluation - Nuclear...  

NLE Websites -- All DOE Office Websites (Extended Search)

Capabilities Sensors and Instrumentation and Nondestructive Evaluation Overview Energy System Applications Safety-Related Applications Homeland Security Applications...

295

Wireless Instrumentation of Aluminum Smelting Operatings  

Science Conference Proceedings (OSTI)

About this Abstract. Meeting, 2010 TMS Annual Meeting & Exhibition. Symposium , Jim Evans Honorary Symposium. Presentation Title, Wireless Instrumentation ...

296

Instrument Series: Deposition and Microfabrication  

NLE Websites -- All DOE Office Websites (Extended Search)

Deposition and Microfabrication Deposition and Microfabrication Sputter Deposition System Only available at EMSL, the Discovery ® Deposition System has been customized to be a fully automated multi-functional "hybrid" instrument with several modes for thin film processing, including multi-target sputtering, effusion cell deposition, electron beam deposition, and in-situ reflection high-energy electron diffraction (RHEED) materials characterization. Unlike most systems, the Discovery ® Deposition System's unique configuration offers operational flexibility, efficiency, and control, allowing a range of applications and materials to be processed simultaneously. Because it is software controlled, users can provide their own "recipes" and have a complete log of what happens throughout the

297

Virtual instrumentation to study galaxies  

E-Print Network (OSTI)

The MIGALE project (http://www.sai.msu.su/migale) provides databases and data analysis tools to study the evolution of galaxies from z=1 to z=0. It develops and maintain a general database, HyperLeda, to give a homogenized parameterization for 3 million objects, and several archives or specialized databases. It also develops tools to analyse on-the-fly data extracted from the database or obtained through the Virtual Observatory (Virtual Instruments). The package made for this project, Pleinpot, is distributed as open source.

Ph. Prugniel; I. Chilingarian; H. Flores; J. Guibert; R. Haigron; I. Jegouzo; F. Royer; F. Tajahmady; G. Theureau; J. Vetois

2004-10-13T23:59:59.000Z

298

Principal Components Instrumental Variable Estimation  

E-Print Network (OSTI)

. The reason for the inconsistency is that the least squares estimation used for the projection of the first stage tends to fit too well, rendering an overfitted PKX which is still correlated with u if the number of instruments is large. The estimating... -dimensional IVE is just an IVE and as such possesses up to rn?G?2 moments, and thus it may achieve the performance in terms of bias of the ‘no moments’ estimators without displaying their unduly volatility due to fat tails. The fulfilment of condition (A) is key...

Winkelried, Diego; Smith, Richard J.

2011-01-31T23:59:59.000Z

299

Small satellite radiation budget instrumentation  

Science Conference Proceedings (OSTI)

A major diagnostic in understanding the response of the Earth`s climate to natural or anthropogenic changes is the radiative balance at the top of the atmosphere. Two classes of measurements may be undertaken: (1) a monitoring of the radiation balance over decade-long long time-scales, and (2) measurements designed to provide a sufficiently complete data set to validate or improve models. This paper discusses some of the important ingredients in obtaining such data, and presents a description of some candidate instrumentation for use on a small satellite. 23 refs.

Weber, P.G.

1992-05-01T23:59:59.000Z

300

Small satellite radiation budget instrumentation  

Science Conference Proceedings (OSTI)

A major diagnostic in understanding the response of the Earth's climate to natural or anthropogenic changes is the radiative balance at the top of the atmosphere. Two classes of measurements may be undertaken: (1) a monitoring of the radiation balance over decade-long long time-scales, and (2) measurements designed to provide a sufficiently complete data set to validate or improve models. This paper discusses some of the important ingredients in obtaining such data, and presents a description of some candidate instrumentation for use on a small satellite. 23 refs.

Weber, P.G.

1992-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "aos instrument suite" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Instrumentation for environmental monitoring. Volume 3. Radiation  

SciTech Connect

A comprehensive survey of instrunnentation for environmental monitoring is being carried out by the Lawrence Berkeley Laboratory under a grant from the Natioral Science Foundation. Instruments being investigated are those useful for measurements of Air Quality, Water Quality, Radiation, and Biomedical Parameters related to environmental research and monitoring. Consideration is given to instruments and techniques presently in use and to those developed for other purposes but having possible applications to this work. The results of the survey are given as (a) descriptions of the physical and operating characteristics of available instruments, (b) critical comparisons among instrumentation methods, and (c) recommendations of promising methodology and development of new instrumentation. The survey material is compiled in 5 loose- leaf volumes which can be periodically updated. An update for volume 3 on radiation instrumentation is presented. New pages are included for insertion in the introductory material and also under the headings nuclear reactors, combination instruments, alpha particle instrumentation, beta particle instrumentation, x and gamma radiation monitoring instrumentation, gamma spectrometry, neutron monitoring instrumentation, personnel dosimetry, radionuclides (strontium -89 and -90, iodine -129 and -131, radium, uranium, plutonium, and instrument notes), and infrared. (WHK)

1973-10-01T23:59:59.000Z

302

Matter in Extreme Conditions Instrument - Conceptual Design Report  

Science Conference Proceedings (OSTI)

The SLAC National Accelerator Laboratory (SLAC), in collaboration with Argonne National Laboratory (ANL), Lawrence Livermore National Laboratory (LLNL), and the University of California at Los Angeles (UCLA), is constructing a Free-Electron Laser (FEL) research facility. The FEL has already met its performance goals in the wavelength range 1.5 nm - 0.15 nm. This facility, the Linac Coherent Light Source (LCLS), utilizes the SLAC 2-Mile Linear Accelerator (linac) and will produce sub-picosecond pulses of short wavelength X-rays with very high peak brightness and almost complete transverse coherence. The final one-third of the SLAC linac is used as the source of electrons for the LCLS. The high energy electrons are transported across the SLAC Research Yard, into a tunnel which houses a long undulator. In passing through the undulator, the electrons are bunched by the force of their own synchrotron radiation and produce an intense, monochromatic, spatially coherent beam of X-rays. By varying the electron energy, the FEL X-ray wavelength is tunable from 1.5 nm to 0.15 nm. The LCLS includes two experimental halls as well as X-ray optics and infrastructure necessary to create a facility that can be developed for research in a variety of disciplines such as atomic physics, materials science, plasma physics and biosciences. This Conceptual Design Report, the authors believe, confirms the feasibility of designing and constructing an X-ray instrument in order to exploit the unique scientific capability of LCLS by creating extreme conditions and study the behavior of plasma under those controlled conditions. This instrument will address the Office of Science, Fusion Energy Sciences, mission objective related to study of Plasma and Warm Dense Matter as described in the report titled LCLS, the First Experiments, prepared by the LCLS Scientific Advisory Committee (SAC) in September 2000. The technical objective of the LCLS Matter in Extreme Conditions (MEC) Instrument project is to design, build, and install at the LCLS an X-ray instrument that will complement the initial instrument suite included in the LCLS construction and the LUSI Major Item of Equipment (MIE) Instruments. As the science programs advance and new technological challenges appear, instrumentation must be developed and ready to conquer these new opportunities. The MEC concept has been developed in close consultation with the scientific community through a series of workshops team meetings and focused reviews. In particular, the MEC instrument has been identified as meeting one of the most urgent needs of the scientific community based on the advice of the LCLS Scientific Advisory Committee (SAC) in response to an open call for letters of intent (LOI) from the breadth of the scientific community. The primary purpose of the MEC instrument is to create High Energy Density (HED) matter and measure its physical properties. There are three primary elements of the MEC instrument: (A) Optical laser drivers that will create HED states by irradiation in several ways and provide diagnostics capability; (B) The LCLS x-ray free electron laser, which will provide the unique capability to create, probe and selectively pump HED states; and, (C) A suite of diagnostic devices required to observe the evolution of the HED state. These elements when combined in the MEC instrument meet the 'Mission Need' as defined in CD-0. For the purposes of the description we separate the types of experiments to be performed into three categories: (1) High pressure: Here we are interested in the generation of high pressure using the optical lasers to irradiate a surface that ablates and drives a pressure wave into a sample, similar to a piston. The pressures that can be reached exceed 1 Mbar and the properties of interest are for example, the reflectivity, conductivity, opacity as well as the changes driven by the pressure wave on, e.g., condensed matter structure. These phenomena will be studied by means of diffraction measurements, measurements of the pressure wave characteristics, in situ probing by

Boyce, R.F.; Boyce, R.M.; Haller, G.; Hastings, J.B.; Hays, G.; Lee, H.J.; /SLAC; Lee, R.W.; /LLNL, Livermore; Nagler, B.; /Rutherford; Scharfenstein, M.; Marsh, D.; White, W.E.; /SLAC

2009-12-09T23:59:59.000Z

303

LGS AO Science Impact: Present and Future Perspectives  

E-Print Network (OSTI)

The recent advent of laser guide star adaptive optics (LGS AO) on the largest ground-based telescopes has enabled a wide range of high angular resolution science, previously infeasible from ground-based and/or space-based observatories. As a result, scientific productivity with LGS has seen enormous growth in the last few years, with a factor of ~10 leap in publication rate compared to the first decade of operation. Of the 54 refereed science papers to date from LGS AO, half have been published in the last ~2 years, and these LGS results have already made a significant impact in a number of areas. At the same time, science with LGS AO can be considered in its infancy, as astronomers and instrumentalists are only beginning to understand its efficacy for measurements such as photometry, astrometry, companion detection, and quantitative morphology. We examine the science impact of LGS AO in the last few years of operations, largely due to the new system on the Keck II 10-meter telescope. We review currently achieved data quality, including results from our own ongoing brown dwarf survey with Keck LGS. We assess current and near-future performance with a critical eye to LGS AO's capabilities and deficiencies. From both qualitative and quantitative considerations, it is clear that the era of regular and important science from LGS AO has arrived.

Michael C. Liu

2008-07-03T23:59:59.000Z

304

Focal Plane Instrumentation of VERITAS  

E-Print Network (OSTI)

VERITAS is a new atmospheric Cherenkov imaging telescope array to detect very high energy gamma rays above 100 GeV. The array is located in southern Arizona, USA, at an altitude of 1268m above sea level. The array consists of four 12-m telescopes of Davies-Cotton design and structurally resembling the Whipple 10-m telescope. The four focal plane instruments are equipped with high-resolution (499 pixels) fast photo-multiplier-tube (PMT) cameras covering a 3.5 degree field of view with 0.15 degree pixel separation. Light concentrators reduce the dead-space between PMTs to 25% and shield the PMTs from ambient light. The PMTs are connected to high-speed preamplifiers allowing operation at modest anode current and giving good single photoelectron peaks in situ. Electronics in the focus box provides real-time monitoring of the anode currents for each pixel and ambient environmental conditions. A charge injection subsystem installed in the focus box allows daytime testing of the trigger and data acquisition system by injecting pulses of variable amplitude and length directly into the photomultiplier preamplifiers. A brief description of the full VERITAS focal plane instrument is given in this paper.

VERITAS Collaboration; T. Nagai; R. McKay; G. Sleege; D. Petry

2007-09-28T23:59:59.000Z

305

Curtis Instruments Inc | Open Energy Information  

Open Energy Info (EERE)

Instruments Inc Instruments Inc Jump to: navigation, search Name Curtis Instruments, Inc. Place Mount Kisco, New York Sector Vehicles Product They make motor speed controllers, battery measurement equipment and related equipment for electric vehicles of all types. References Curtis Instruments, Inc.[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Curtis Instruments, Inc. is a company located in Mount Kisco, New York . References ↑ "Curtis Instruments, Inc." Retrieved from "http://en.openei.org/w/index.php?title=Curtis_Instruments_Inc&oldid=344009" Categories: Clean Energy Organizations Companies Organizations Stubs What links here Related changes Special pages

306

MR Instrument Team - ORNL Neutron Sciences  

NLE Websites -- All DOE Office Websites (Extended Search)

MR-Instrument Team MR-Instrument Team MR instrument team MR Team (left to right): Valeria Lauter, Lead Instrument Scientist, Primary Contact Artur Glavic, Instrument Scientist Hailemariam Ambaye, Scientific Associate Rick Goyette, Scientific Associate Lead Instrument Scientist: Dr. Valeria Lauter Valeria Lauter Beam line 4A's lead instrument scientist is Valeria Lauter. Valeria received her PhD in Experimental and Theoretical Solid State Physics from the Joint Institute for Nuclear Research in Dubna, Russia. Her previous work has been as a Research Scientist at the Technical University of Munich, Germany; Research Scientist at the University of Konstanz, Germany; Visiting Scientist at the Institute Laue-Langevin in Grenoble, France; Research Scientist at the Laboratoire de Magnetisme CNRS in Grenoble,

307

LANSCE | Lujan Center | Instruments | PHAROS  

NLE Websites -- All DOE Office Websites (Extended Search)

High-Resolution Chopper Spectrometer | Pharos High-Resolution Chopper Spectrometer | Pharos Local Structure, Magnetism, and Nanomaterials Pharos is designed for studies of fundamental excitations in condensed-matter systems. The instrument provides 2% to 4% incident energy resolution and uses a high-speed Fermi chopper to obtain monochromatic incident energies in the range from 10 meV to 2 eV. The sample is positioned 20 meters from a chilled-water moderator. The spectrometer consists of an evacuated, shielded flight path with 10 m2 of meter-long position-sensitive detectors located at a distance of 4 meters from the sample and covering scattering angles between -10° and 145°. Pharos can accommodate the full range of inelastic scattering experiments on liquid, polycrystalline, and single-crystal samples. This includes

308

DEVELOPMENT OF ELECTRO-OPTICAL INSTRUMENTATION FOR REACTOR SAFETY STUDIES  

E-Print Network (OSTI)

of the Two-Phase Flow Instrumentation Group Meeting, U.S.OF ELECTRO-OPTICAL INSTRUMENTATION FOR REACTOR SAFETYOF ELECTRO-OPTICAL INSTRUMENTATION FOR REACTOR SAFETY

Turko, B.T.

2010-01-01T23:59:59.000Z

309

DOSIMETRY, INSTRUMENTATION AND EXPOSURE CHAMBERS FOR DC MAGNETIC HELD STUDIES  

E-Print Network (OSTI)

C. -K. Yen ENGINEERING AND INSTRUMENTATION C. Dols D. NelsonLaboratory DOSIMETRY, INSTRUMENTATION AND EXPOSURE CHAMBERSLBL-9554 DOSIMETRY, INSTRUMENTATION AND EXPOSURE CHAMBERS

Tenforde, T.S.

2010-01-01T23:59:59.000Z

310

Instrumentation and Quench Protection for LARP Nb3Sn Magnets  

E-Print Network (OSTI)

Instrumentation and Quench Protection for LARP Nb 3 Snis a primary goal. The instrumentation is consequently a keydetails of the LQ instrumentation and its implementation

Felice, H.

2010-01-01T23:59:59.000Z

311

A SURVEY OF INSTRUMENTATION USED FOR MONITORING METALS IN WATER  

E-Print Network (OSTI)

references. bJarrell -Ash, Instrumentation Lab . , Perkin£ sample, Jarrell-Ash, Instrumentation Labs. , Perkin Elmer,this room A Survey of Instrumentation Used for Monitoring

Quinby-Hunt, M.S.

2011-01-01T23:59:59.000Z

312

Fiberoptics-Based Instrumentation for Storage Ring Beam Diagnostics  

E-Print Network (OSTI)

FIBEROPTICS-BASED INSTRUMENTATION FOR STORAGE RING BEAMbeam diagnostic instrumentation that measures longitudinalet al. , “Fiberoptics-based Instrumentation for Storage Ring

Byrd, John M.; De Santis, Stefano; Yin, Yan

2008-01-01T23:59:59.000Z

313

ROCK INSTRUMENTATION PROBLEMS EXPERIENCED DURING IN-SITU HEATER TESTS  

E-Print Network (OSTI)

and R. Haught, Instrumentation evaluation, calibration, and27 - 30,1979. ROCK INSTRUMENTATION PROBLEMS EXPERIENCEDdiscussed here,l INSTRUMENTATION AND DATA ACQUISITION SYSTEM

Binnall, E.

2012-01-01T23:59:59.000Z

314

Spiral Development for Safeguards Instrumentation  

SciTech Connect

Safeguards instrumentation is highly specialized, so a common approach in the US has been to develop initial prototypes for performance, operability and security within the US National Laboratories for the IAEA and then seek one or more commercial partners. Transfer of technology from US National Laboratories is a legal requirement for products that have the potential for mass production. Other important objectives include minimizing time to deployment and lifecycle cost, and optimizing product maintainability, sustainability and manufacturability. Unfortunately, the deployment of systems developed via this model has sometimes been seriously delayed or never adopted because of the difficulty of optimizing the significant parameters of the process between the public and private sectors. The authors suggest that forming an R&D partnership between a research laboratory and a commercial company much earlier in the process would provide significant advantages. The present US practice leads to unnecessary expenditures during the early R&D phase since many decisions are made based on research needs that are counterproductive for commercialization and manufacturability. If the ultimate goal of the project is to produce a reliable and cost effective commercial product, the commercial input is needed early and often. The new “model” of developing systems in a closer collaboration with the private sector, in a spiral “Commercialization by Design” approach, should also limit the long term financial mortgages that Member States frequently experience with respect to safeguards instrumentation development using the present process. As a concrete example, the potential for incorporating Wire Integrity Verification Technology into the iCobra Reader System is discussed.

Koskelo, M.; Undem, Halvor A.; Good, Morris S.; Frazar, Sarah L.; Schanfein, Mark; Kadner, S.

2012-10-12T23:59:59.000Z

315

MC and A instrumentation catalog  

SciTech Connect

In 1981 and 1985, two editions of a catalog of non-destructive nuclear measurement instrumentation, and material control and surveillance equipment, were published by Brookhaven National Laboratory (BNL). The last edition of the catalog included one hundred and twenty-five entries covering a wide range of devices developed in the US and abroad. More than ten years have elapsed since the publication of the more recent Catalog. Devices described in it have undergone significant modifications, and new devices have been developed. Therefore, in order to assist specialists in the field of Material Control and Accounting (MC and A), a new catalog has been created. Work on this instrumentation catalog started in 1997 as a cooperative effort of Brookhaven National Laboratory (BNL), operated by Brookhaven Science Associates under contract to the US Department of Energy, and the All-Russian Research Institute of Automatics (VNIIA), subordinate institute of the Atomic Energy Ministry of the Russian Federation, within the collaborative US-Russia Material Protection, Control, and Accounting (MPC and A) Program. Most of the equipment included in the Catalog are non-destructive assay (NDA) measurement devices employed for purposes of accounting, confirmation, and verification of nuclear materials. Other devices also included in the Catalog are employed in the detection and deterrence of unauthorized access to or removal of nuclear materials (material control: containment and surveillance). Equipment found in the Catalog comprises either: (1) complete devices or systems that can be used for MC and A applications; or (2) parts or components of complete systems, such as multi-channel analyzers, detectors, neutron generators, and software. All devices are categorized by their status of development--from prototype to serial production.

Neymotin, L. [ed.] [Brookhaven National Lab., Upton, NY (United States); Sviridova, V. [ed.] [All-Russian Research Inst. of Automatics, Moscow (Russian Federation)

1998-06-01T23:59:59.000Z

316

A Heuristic for Near-Optimal Troubleshooting Using AO  

E-Print Network (OSTI)

When troubleshooting malfunctioning technical equipment, the task is to locate faults and make repairs until the equipment functions properly again. The AO * algorithm can be used to find troubleshooting strategies that are optimal in the sense that the expected cost of repair is minimal. We have adapted the AO * algorithm for troubleshooting in the automotive domain with limited time. We propose a new heuristic based on entropy. By using this heuristic, near-optimal strategies can be found within a fixed time limit. This is shown in empirical studies on a fuel injection system of a truck. In these results, the AO * algorithm using the new heuristic, performs better than other troubleshooting algorithms. 1

Mattias Nyberg

2008-01-01T23:59:59.000Z

317

New generation of the SORTI instruments  

NLE Websites -- All DOE Office Websites (Extended Search)

New generation of the SORTI instruments New generation of the SORTI instruments Hawat, Tom Denver University Murcray, Frank University of Denver Category: Instruments In order to generate long-term monitoring data of the atmospheric composition using SORTI instrument and integrated in the Aura validation campaign, a new instrument generation has been developed. SORTI is a Fourier Transform Spectrometer system, including an automatic solar tracker and a computer for control, data processing, and storage. SORTI is refurbished and operates to generate very high spectral resolution (~0.004 cm-1) infrared spectra (2.5 to 14 microns, 4000 to 750 cm-1) of the earth's atmosphere using the sun as the external source. The instrument enables one to perform the operation of the spectrometric atmospheric

318

Metadata-Based Parallelization of Program Instrumentation  

E-Print Network (OSTI)

Program instrumentation has a wide variety of useful applications, but tool writers must overcome the challenge of substantial overheads caused by introducing additional code and data into a program. This paper observes that instrumentation usually operates on many discrete, independent data structures, which we call metadata parallelism. We proposes to exploit this phenomenon to reduce the overhead of instrumented programs by executing instrumentation function invocations that manipulate different pieces of metadata simultaneously in different threads. The key challenge to spreading instrumentation function execution across many threads is ensuring that metadata updates occur in the correct order, and do not suffer from data races. Metadata-based parallelization solves this problem by using a user-specified mapping of instrumentation function invocations to serialization sets.

Matthew D. Allen; Gurindar S. Sohi; Matthew D. Allen; Gurindar S. Sohi

2007-01-01T23:59:59.000Z

319

Predictive Services Department John B. Connally Building 301 Tarrow, Suite 304 College Station, Texas 77840-7896  

E-Print Network (OSTI)

. Connally Building 301 Tarrow, Suite 304 College Station, Texas 77840-7896 TEL 979/458-6530 FAX 979/458-7333 http://texasforestservice.tamu.edu Winter 2011 Wildland Fire Season Outlook for Texas September 24 days developing in the coming few weeks and months. Brad Smith, Fuels Analyst with the Texas Forest

320

Underground coal mining is an industry well suited for robotic automation. Human operators are severely hampered in  

E-Print Network (OSTI)

Abstract Underground coal mining is an industry well suited for robotic automation. Human operators approach meets the requirements for cutting straight entries and mining the proper amount of coal per cycle. Introduction The mining of soft materials, such as coal, is a large industry. Worldwide, a total of 435 million

Guestrin, Carlos

Note: This page contains sample records for the topic "aos instrument suite" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Thme Date Enseignant Thme Date Enseignant AKIN Tuna Suites 16-mai AD Equa diff 24-mai RL  

E-Print Network (OSTI)

Page 1 Page 1 Thème Date Enseignant Thème Date Enseignant AKIN Tuna Suites 16-mai AD Equa diff 24 Probas 23-mai MAC Thème Date Enseignant Thème Date Enseignant AKIN Tuna Configurations 31-mai DT Arithm

Douai, Antoine

322

How to maximize the value of big data with the open source SpagoBI suite through a comprehensive approach  

Science Conference Proceedings (OSTI)

This paper describes the approach adopted by SpagoBI suite (www.spagobi.org) to manage large volumes of heterogeneous structured and unstructured data, to perform real-time Business Intelligence on Big Data streaming and to give meaning to data through ...

Monica Franceschini

2013-08-01T23:59:59.000Z

323

Optimal Instrumentation for Combined Cycle Plant Performance  

Science Conference Proceedings (OSTI)

Power plants today rely on distributed control systems (DCS) to operate their equipment. These control systems subsequently rely on process information provided by various instruments in the field. The accuracy and reliability of field instrumentation has a direct correlation to the ability of the control system to operate correctly, including the ability to control the plant in a safe and reliable manner.Beyond instrumentation relied on for control of the power plant, additional ...

2013-11-11T23:59:59.000Z

324

Detectors - Instrument Support | ORNL Neutron Sciences  

NLE Websites -- All DOE Office Websites (Extended Search)

Detectors Detectors Detectors The detector design group, led by Yacouba Diawara is responsible for supporting the design of HFIR and SNS instruments by developing the necessary infrastructure and acquiring detector components that will be used to complete the functionality of the instruments. The group's mission also includes supporting detector research and development (R&D) for the various instruments and their different needs. The support effort for instrument design entails monitoring detector development worldwide as neutron facilities around the globe are getting upgraded and adopting the newest technologies. Detector group technician Ted Visscher inspects a parahedreal lens on an Anger camera Detector group technician Ted Visscher inspects a parahedreal lens on an

325

Nanomaterials and the Environment & Instrumentation, Metrology...  

NLE Websites -- All DOE Office Websites (Extended Search)

Exposure Assessment of Nanomaterials October 6-7, 2009: Nanomaterials and the Environment & Instrumentation, Metrology, and Analytical Methods November 17-18, 2009:...

326

Mechanical Characterization Using The Instrumented Indentation Test  

Science Conference Proceedings (OSTI)

Abstract Scope, The instrumented indentation test(IIT) is being increasingly used to evaluate mechanical characteristics of materials because of its advantages: it ...

327

International Neutron Scattering Instrumentation School (INSIS...  

NLE Websites -- All DOE Office Websites (Extended Search)

INSIS 2012 International Neutron Scattering Instrumentation School (INSIS) 15 - 27 July, 2012 INSIS 2012 INFN - Laboratori Nazionali di Frascati * Rome, Italy About the School How...

328

User interfaces in space science instrumentation .  

E-Print Network (OSTI)

??This thesis examines user interaction with instrumentation in the specific context of space science. It gathers together existing practice in machine interfaces with a look… (more)

McCalden, A.J.

2006-01-01T23:59:59.000Z

329

Instrumentation and Controls, IC, Accelerator Operations and...  

NLE Websites -- All DOE Office Websites (Extended Search)

Instrumentation and Controls, IC About Us AOT Home Teams Beam Diagnostics Controls Software ECAD Electronics Vacuum CONTACTS Group Leader Fred E. Shelley Office Administrator...

330

ISG8-Parameters, Design, Instrumentation and Tuning  

NLE Websites -- All DOE Office Websites (Extended Search)

Parameters, Design, Instrumentation and Tuning (WG1) Bldg.212 Cascades Conference Rm. K. Kubo, T. Raubenheimer, P. Tenenbaum, K. Yokoya Parallel Sessions: Working Groups: WG1:...

331

Instruments for subsurface monitoring of geothermal subsidence  

DOE Green Energy (OSTI)

The requirements for a subsurface geothermal subsidence instrument were reviewed. Available instruments for monitoring subsurface displacements, both vertical and horizontal, were studied and the most capable instruments identified. Techniques and materials for improving existing or developing new instruments were evaluated. Elements of sensor and signal technology with potential for high temperature monitoring of subsidence were identified. Drawing from these studies, methods to adapt production wells for monitoring were proposed and several new instrumentation systems were conceptually designed. Finally, four instrumentation systems were selected for future development. These systems are: triple sensor induction sensor probe (with casing collar markers); triple sensor gamma ray detector probe (with radioactive markers); triple sensor reed switch probe (with magnet markers); and triple sensor oscillator-type magnet detector probe (with magnet markers). All are designed for use in well casing incorporating slip couplings or bellows sections, although the gamma ray detector probe may also be used in unlined holes. These systems all measure vertical moement. Instruments to measure horizontal displacement due to geothermal subsidence were studied and the required instrument performance was judged to be beyond the state-of-the-art. Thus, no conceptual designs for instruments to monitor horizontal movement are included.

O'Rourke, J.E.; Ranson, B.B.

1979-07-01T23:59:59.000Z

332

Computational and experimental study of instrumented indentation  

E-Print Network (OSTI)

The effect of characteristic length scales, through dimensional and microstructural miniaturizations, on mechanical properties is systematically investigated by recourse to instrumented micro- and/or nanoindentation. This ...

Chollacoop, Nuwong, 1977-

2004-01-01T23:59:59.000Z

333

ARM - Campaign Instrument - ftir-raob  

NLE Websites -- All DOE Office Websites (Extended Search)

(FTIR-RAOB) Instrument Categories Radiometric, Atmospheric Profiling Campaigns The ARM Pilot Radiation Observation Experiment (PROBE) Download Data Tropical Western Pacific,...

334

Instrumentation-Surface Electrochemistry and Electrocatalysis...  

NLE Websites -- All DOE Office Websites (Extended Search)

instrumentation, including one PARC 270, six Voltalab 10-40 potentiostats, BAS 100, CHI 604 and 700C electrochemical analyzers, six sets for rotating disk-ring...

335

Instrument Schedule for ng7refl  

Science Conference Proceedings (OSTI)

Instrument Schedule For NG-7 -- Cold neutron reflectometer-horizontal sample. ... 12/12/2012 11:00, 6, 18041, Dependence of the fusion of Dengue E ...

336

LANSCE | Lujan Center | Instruments | NPDF Technical Sheet  

NLE Websites -- All DOE Office Websites (Extended Search)

articles since the instrument shutter opened in 2002, in fields as diverse as geochemistry, actinide research, complex oxides, bulk metallic glasses, and hydrogen storage...

337

GEOTECHNICAL ASSESSMENT AND INSTRUMENTATION NEEDS FOR NUCLEAR WASTE ISOLATION IN CRYSTALLINE AND ARGILLACEOUS ROCKS SYMPOSIUM  

E-Print Network (OSTI)

Summary • • INSTRUMENTATION NEEDS FOR DETERMINING ROCKDepository Design . . • • • . . INSTRUMENTATION NEEDS FORASSESSMENT AND INSTRUMENTATION NEEDS FOR NUCLEAR WASTE

Authors, Various

2011-01-01T23:59:59.000Z

338

NIST: N42-2011 Neutron Handheld Instruments  

Science Conference Proceedings (OSTI)

... The instrument's location and battery status is reported for each reading. Neutron handheld instrument file: http://physics ...

2012-02-09T23:59:59.000Z

339

High-temperature borehole instrumentation  

DOE Green Energy (OSTI)

Research in materials, equipment, and instrument development was required in the Hot Dry Rock Energy Extraction Demonstration at Fenton Hill located in northern New Mexico. The new Phase II Energy Extraction System at the Fenton Hill Test Site will consist of two wellbores drilled to a depth of about 4570 m (15,000 ft) and then connected by a series of hydraulic-induced fractures. The first borehole (EE-2) was completed in May of 1980, at a depth of 4633 m (15,200 ft) of which approximately 3960 m (13,000 ft) is in Precambrian granitic rock. Starting at a depth of approximately 2930 m (9600 ft), the borehole was inclined up to 35/sup 0/ from vertical. Bottom-hole temperature in EE-2 is 317/sup 0/C. The EE-3 borehole was then drilled to a depth of 4236 m (13,900 ft). Its inclined part is positioned directly over the EE-2 wellbore with a vertical separation of about 450 m (1500 ft) between them. The materials development programs cover all aspects of geothermal energy extraction. Research on drilling, hydraulic fracturing, and wellbore logging were necessary to determine the technical and economic feasibility of the hot dry rock concepts.

Dennis, B.R.; Koczan, S.; Cruz, J.

1982-01-01T23:59:59.000Z

340

Tokamak x ray diagnostic instrumentation  

SciTech Connect

Three classes of x-ray diagnostic instruments enable measurement of a variety of tokamak physics parameters from different features of the x-ray emission spectrum. (1) The soft x-ray (1 to 50 keV) pulse-height-analysis (PHA) diagnostic measures impurity concentrations from characteristic line intensities and the continuum enhancement, and measures the electron temperature from the continuum slope. (2) The Bragg x-ray crystal spectrometer (XCS) measures the ion temperature and neutral-beam-induced toroidal rotation velocity from the Doppler broadening and wavelength shift, respectively, of spectral lines of medium-Z impurity ions. Impurity charge state distributions, precise wavelengths, and inner-shell excitation and recombination rates can also be studied. X rays are diffracted and focused by a bent crystal onto a position-sensitive detector. The spectral resolving power E/..delta..E is greater than 10/sup 4/ and time resolution is 10 ms. (3) The x-ray imaging system (XIS) measures the spatial structure of rapid fluctuations (0.1 to 100 kHZ) providing information on MHD phenomena, impurity transport rates, toroidal rotation velocity, plasma position, and the electron temperature profile. It uses an array of silicon surface-barrier diodes which view different chords of the plasma through a common slot aperture and operate in current (as opposed to counting) mode. The effectiveness of shields to protect detectors from fusion-neutron radiation effects has been studied both theoretically and experimentally.

Hill, K.W.; Beiersdorfer, P.; Bitter, M.; Fredrickson, E.; Von Goeler, S.; Hsuan, H.; Johnson, L.C.; Liew, S.L.; McGuire, K.; Pare, V.

1987-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "aos instrument suite" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Instrumentation, Control, and Intelligent Systems  

DOE Green Energy (OSTI)

Abundant and affordable energy is required for U.S. economic stability and national security. Advanced nuclear power plants offer the best near-term potential to generate abundant, affordable, and sustainable electricity and hydrogen without appreciable generation of greenhouse gases. To that end, Idaho National Laboratory (INL) has been charged with leading the revitalization of nuclear power in the U.S. The INL vision is to become the preeminent nuclear energy laboratory with synergistic, world-class, multi-program capabilities and partnerships by 2015. The vision focuses on four essential destinations: (1) Be the preeminent internationally-recognized nuclear energy research, development, and demonstration laboratory; (2) Be a major center for national security technology development and demonstration; (3) Be a multi-program national laboratory with world-class capabilities; (4) Foster academic, industry, government, and international collaborations to produce the needed investment, programs, and expertise. Crucial to that effort is the inclusion of research in advanced instrumentation, control, and intelligent systems (ICIS) for use in current and advanced power and energy security systems to enable increased performance, reliability, security, and safety. For nuclear energy plants, ICIS will extend the lifetime of power plant systems, increase performance and power output, and ensure reliable operation within the system's safety margin; for national security applications, ICIS will enable increased protection of our nation's critical infrastructure. In general, ICIS will cost-effectively increase performance for all energy security systems.

Not Available

2005-09-01T23:59:59.000Z

342

Integration & Co-development of a Geophysical CO2 Monitoring Suite  

SciTech Connect

Carbon capture and sequestration (CCS) has emerged as a key technology for dramatic short-term reduction in greenhouse gas emissions in particular from large stationary. A key challenge in this arena is the monitoring and verification (M&V) of CO2 plumes in the deep subsurface. Towards that end, we have developed a tool that can simultaneously invert multiple sub-surface data sets to constrain the location, geometry, and saturation of subsurface CO2 plumes. We have focused on a suite of unconventional geophysical approaches that measure changes in electrical properties (electrical resistance tomography, electromagnetic induction tomography) and bulk crustal deformation (til-meters). We had also used constraints of the geology as rendered in a shared earth model (ShEM) and of the injection (e.g., total injected CO{sub 2}). We describe a stochastic inversion method for mapping subsurface regions where CO{sub 2} saturation is changing. The technique combines prior information with measurements of injected CO{sub 2} volume, reservoir deformation and electrical resistivity. Bayesian inference and a Metropolis simulation algorithm form the basis for this approach. The method can (a) jointly reconstruct disparate data types such as surface or subsurface tilt, electrical resistivity, and injected CO{sub 2} volume measurements, (b) provide quantitative measures of the result uncertainty, (c) identify competing models when the available data are insufficient to definitively identify a single optimal model and (d) rank the alternative models based on how well they fit available data. We present results from general simulations of a hypothetical case derived from a real site. We also apply the technique to a field in Wyoming, where measurements collected during CO{sub 2} injection for enhanced oil recovery serve to illustrate the method's performance. The stochastic inversions provide estimates of the most probable location, shape, volume of the plume and most likely CO{sub 2} saturation. The results suggest that the method can reconstruct data with poor signal to noise ratio and use hard constraints available from many sites and applications. External interest in the approach and method is high, and already commercial and DOE entities have requested technical work using the newly developed methodology for CO{sub 2} monitoring.

Friedmann, S J

2007-07-24T23:59:59.000Z

343

Void Fraction Instrument operation and maintenance manual  

SciTech Connect

This Operations and Maintenance Manual (O&MM) addresses riser installation, equipment and personnel hazards, operating instructions, calibration, maintenance, removal, and other pertinent information necessary to safely operate and store the Void Fraction Instrument. Final decontamination and decommissioning of the Void Fraction Instrument are not covered in this document.

Borgonovi, G.; Stokes, T.I.; Pearce, K.L.; Martin, J.D.; Gimera, M.; Graves, D.B.

1994-09-01T23:59:59.000Z

344

An Intelligent Chilled Mirror Humidity Instrument  

Science Conference Proceedings (OSTI)

An intelligent, chilled mirror humidity instrument has been designed for use on buoys and ships. Our design goal is for the instrument to make high-quality dewpoint temperature measurements for a period of up to one year from an unattended ...

David S. Hosom; Gennaro H. Crescenti; Clifford L. Winget; Sumner Weisman; Donald P. Doucet; James F. Price

1991-08-01T23:59:59.000Z

345

Instrumentation @ Catalysis: Reactivity and Structure Group | Chemistry  

NLE Websites -- All DOE Office Websites (Extended Search)

Instrumentation Instrumentation The Catalysis Group at BNL is leading research initiatives into the development of new tools and techniques that focus on the characterization of heterogeneous catalytic reactions and catalysts using imaging, spectroscopy and scattering techniques and integrated combinations of them under reaction conditions to unravel the morphology, chemical and structural properties, of catalysts, respectively. These efforts revolve around the use of synchrotron radiation (NSLS), electrons (CFN) and quantum tunneling tools with particular thrusts into imaging, spectroscopy and scattering. Groups Instrumentation(BNL) Three UHV chambers with diverse instrumentation for surface characterization: LEED, UPS, XPS, AES, TPD, ISS, PM-AP-IRRAS, Reactivity Cell. All the systems include ancillary instrumentation such as sputtering guns and metal evaporators. The IRRAS system was retrofitted with an ambient pressure (AP) cell on top of the UHV system. The sample can be prepared and characterized in UHV and then transfer in vacuum to the AP cell.

346

Advanced Instrumentation for Extreme Environments  

Science Conference Proceedings (OSTI)

The Department of Energy (DOE) Office of Nuclear Energy (NE) is pursuing embedded instrumentation and controls (I&C) technology for next generation nuclear power generation applications. Embedded systems encompass a wide range of configurations and technologies; we define embedding in this instance as the integration of the sensors and the control system design into the component design using a systems engineering process. Embedded I&C systems are often an essential part of developing new capabilities, improving reliability, enhancing performance, and reducing operational costs. The new intrinsically safe, more efficient, and cost effective reactor technologies (Next Generation Nuclear Plant and Small Modular Reactors) require the development and application of new I&C technologies. These new designs raise extreme environmental challenges such as high temperatures (over 700 C) and material compatibility (e.g., molten salts). The desired reliability and functionality requires measurements in these extreme conditions including high radiation environments which were not previously monitored in real time. The DOE/NE Nuclear Energy Enabling Technologies (NEET) program currently has several projects investigating I&C technologies necessary to make these reactor designs realizable. The project described in this paper has the specific goal of investigating embedded I&C with the following objectives: 1.Explore and quantify the potential gains from embedded I&C improved reliability, increased performance, and reduced cost 2.Identify practical control, sensing, and measurement techniques for the extreme environments found in high-temperature reactors 3.Design and fabricate a functional prototype high-temperature cooling pump for molten salts represents target demonstration of improved performance, reliability, and widespread usage There are many engineering challenges in the design of a high-temperature liquid salt cooling pump. The pump and motor are in direct contact with molten fluoride salt at 700 C (1,292 F) as part of a reactor cooling loop. The motor-pump combination during normal operation would be red-hot (Figure 1). This environment challenges every facet of the design including seals, wiring, magnetic materials, and sensors. In this paper, we discuss the challenges of sensor design in extreme environments and specifically the sensor design for a high-temperature fluoride salt coolant pump. This pump will be used as a test-bed for embedded I&C development and validation in extreme environments.

Melin, Alexander M [ORNL; Kisner, Roger [ORNL; Fugate, David L [ORNL

2013-01-01T23:59:59.000Z

347

Verification Test Suite (VERTS) For Rail Gun Applications using ALE3D: 2-D Hydrodynamics & Thermal Cases  

Science Conference Proceedings (OSTI)

A verification test suite has been assessed with primary focus on low reynolds number flow of liquid metals. This is representative of the interface between the armature and rail in gun applications. The computational multiphysics framework, ALE3D, is used. The main objective of the current study is to provide guidance and gain confidence in the results obtained with ALE3D. A verification test suite based on 2-D cases is proposed and includes the lid-driven cavity and the Couette flow are investigated. The hydro and thermal fields are assumed to be steady and laminar in nature. Results are compared with analytical solutions and previously published data. Mesh resolution studies are performed along with various models for the equation of state.

Najjar, F M; Solberg, J; White, D

2008-04-17T23:59:59.000Z

348

Advanced Sensors and Instrumentation | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Sensors and Instrumentation Sensors and Instrumentation Advanced Sensors and Instrumentation The ASI subprogram plans to develop the scientific basis for sensors and supporting infrastructure technology that will address crosscutting technology gaps relating to measurements at existing and advanced nuclear power plants as well as within their fuel cycles. The focus of the program is on the following technical challenges and objectives: Identify needed physical measurement accuracy of nuclear system process parameters and minimize uncertainty. Identify and conduct research into monitoring and control technologies, including human factors, to achieve control of new nuclear energy processes, and new methodologies for monitoring to achieve high reliability and availability. Integrate control of multiple processes, potential reductions in

349

Licenses Available in Analytical Instrumentation | ORNL  

NLE Websites -- All DOE Office Websites (Extended Search)

Analytical Instrumentation Analytical Instrumentation SHARE Analytical Instrumentation 199700361 Neutron Detection Using an Embedded Sol-Gel Neutron Absorber 199700370 Bioluminescent Bioreporter Integrated Circuits 199900683 Microscale Ion Trap Mass Spectrometer 200101009 Automated Sampling for Microarray Readout Using Electrospray Mass Spectrometry 200201069 Planar Flow-By Electrode Capacitive Electrospray Ion Source 200201145 Fluorescent Nanoparticles for Radiation Detection 200301290 Pulse Thermal Processing of Functional Materials Using a Directed Plasma Arc 200401367 Composite Solid-State Scintillators for Neutron Detection 200501505 Resistive-Glass Drift Tube for Use as a Controlled Kinetic Energy Ion Source 200601675 Functionalized Gold Nanoparticles for Rapid,

350

Beam instrumentation for the SSC RFQ  

SciTech Connect

A detailed description of the SSC RFQ beam instrumentation is presented. Most of the instrumentation is located in the RFQ end walls. The upstream end wall contains a segmented Faraday cup, a segmented aperture and a wire scanner. The down stream end wall contains a segmented aperture and wire scanner. Two current toroids are used to measure the transmission through the RFQ. The output of the RFQ is a low emittance, pulsed 2.5 Mev H{sup {minus}} beam with peak current of 25 mA and maximum pulse length of 35 {mu}s. Typical beam data are shown with the emphasis being on instrumentation performance.

Datte, P.; Jamieson, G.; Aiello, R.; Beechy, D.; Jones, A.; Martin, D.; Riordon, J.; Webber, R.; Wood, F.

1993-05-01T23:59:59.000Z

351

Particle size distribution instrument. Topical report 13  

DOE Green Energy (OSTI)

The development of an instrument to measure the concentration of particles in gas is described in this report. An in situ instrument was designed and constructed which sizes individual particles and counts the number of occurrences for several size classes. Although this instrument was designed to detect the size distribution of slag and seed particles generated at an experimental coal-fired magnetohydrodynamic power facility, it can be used as a nonintrusive diagnostic tool for other hostile industrial processes involving the formation and growth of particulates. Two of the techniques developed are extensions of the widely used crossed beam velocimeter, providing simultaneous measurement of the size distribution and velocity of articles.

Okhuysen, W.; Gassaway, J.D.

1995-04-01T23:59:59.000Z

352

Instrument calibration using the pneumatic deadweight tester  

SciTech Connect

One of the most difficult problems facing the instrument engineer is the accurate calibration of orifice meters, particularly at remote or inaccessible locations. The object of this paper is to describe a unique solution to this problem, an automatic pneumatic deadweight tester utilizing the floating ball principle. The Ametek Model PK Pneumatic Deadweight Tester is an ideal instrument to use for the calibration of orifice meters. This instrument provides unexcelled accuracy combined with reliable operation and ease of use for both field and laboratory calibration. It has been accepted by most of the gas transmission companies as a pressure standard for meter calibration.

Johnson, E.R.

1984-04-01T23:59:59.000Z

353

Instrumentation upgrades for the Macromolecular Crystallography beamlines  

NLE Websites -- All DOE Office Websites (Extended Search)

Instrumentation upgrades for the Macromolecular Crystallography beamlines Instrumentation upgrades for the Macromolecular Crystallography beamlines of the Swiss Light Source Monday, October 29, 2012 - 2:00am SSRL, Bldg. 137, Rm. 322 Martin Fuchs, MX Group, Swiss Light Source; Paul Scherrer Institute (Villigen, Switzerland) A new unified diffractometer - the D3 - has been developed for the three MX beamlines. The first of the instruments is in general user operation at beamline X10SA since April 2012. The varied demands from both challenging academic research projects as well as high throughput industrial applications on today's macromolecular crystallography beamlines drive developments to both endstations and beamline optics. Recent instrumentation upgrades to the macromolecular crystallography (MX) beamlines of the Swiss Light Source therefore aimed to

354

Dewcon Instruments Inc | Open Energy Information  

Open Energy Info (EERE)

Dewcon Instruments Inc Dewcon Instruments Inc Jump to: navigation, search Name Dewcon Instruments Inc Place Palatine, Illinois Product A process instrumentation company specialising in moisture sensors, analysers, meters, hygrometers and probes for on-line humidity and dew point measurement and control in drying, chemical and pharmaceutical applications. Coordinates 42.949081°, -74.557237° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":42.949081,"lon":-74.557237,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

355

Cellular telephone-based radiation detection instrument  

DOE Patents (OSTI)

A network of radiation detection instruments, each having a small solid state radiation sensor module integrated into a cellular phone for providing radiation detection data and analysis directly to a user. The sensor module includes a solid-state crystal bonded to an ASIC readout providing a low cost, low power, light weight compact instrument to detect and measure radiation energies in the local ambient radiation field. In particular, the photon energy, time of event, and location of the detection instrument at the time of detection is recorded for real time transmission to a central data collection/analysis system. The collected data from the entire network of radiation detection instruments are combined by intelligent correlation/analysis algorithms which map the background radiation and detect, identify and track radiation anomalies in the region.

Craig, William W. (Pittsburg, CA); Labov, Simon E. (Berkeley, CA)

2011-06-14T23:59:59.000Z

356

Field instrumentation for vocalizing avian survey  

E-Print Network (OSTI)

We present automated instruments to facilitate the monitoring of vocalizing species in their environment with minimal disruption. These devices offer recording and acoustic localization of bird calls and relay data via the ...

Elliott, Grant (Grant Andrew)

2007-01-01T23:59:59.000Z

357

ARM - Campaign Instrument - pyran-yankee-isothermal  

NLE Websites -- All DOE Office Websites (Extended Search)

yankee-isothermal Comments? We would love to hear from you Send us a note below or call us at 1-888-ARM-DATA. Send Campaign Instrument : Yankee Isothermal Pyranometer...

358

ARM - Campaign Instrument - aerosol-tower-eml  

NLE Websites -- All DOE Office Websites (Extended Search)

govInstrumentsaerosol-tower-eml Comments? We would love to hear from you Send us a note below or call us at 1-888-ARM-DATA. Send Campaign Instrument : EML Tower based Aerosol...

359

ARM - Campaign Instrument - synoptic-maps  

NLE Websites -- All DOE Office Websites (Extended Search)

govInstrumentssynoptic-maps Comments? We would love to hear from you Send us a note below or call us at 1-888-ARM-DATA. Send Campaign Instrument : National Climatic Data Center...

360

Optimization of naïve dynamic binary instrumentation Tools/  

E-Print Network (OSTI)

The proliferation of dynamic program analysis tools has done much to ease the burden of developing complex software. However, creating such tools remains a challenge. Dynamic binary instrumentation frameworks such as ...

Kleckner, Reid (Reid N.)

2011-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "aos instrument suite" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Supersaturation in the Wyoming CCN Instrument  

Science Conference Proceedings (OSTI)

Two thermal diffusion cloud condensation nuclei (CCN) instruments were intercompared using a nearly monodisperse test aerosol composed of sodium chloride and ammonium sulfate. The main objective of this work is the determination of the maximum ...

Jefferson R. Snider; Markus D. Petters; Perry Wechsler; Peter S. K. Liu

2006-10-01T23:59:59.000Z

362

Scientific Assessment of the SWIFT Instrument Design  

Science Conference Proceedings (OSTI)

The Stratospheric Wind Interferometer For Transport studies (SWIFT) is a proposed satellite instrument. SWIFT is an imaging, field-widened Doppler Michelson interferometer. It observes a thermal IR atmospheric emission line in a limb-viewing ...

Peyman Rahnama; William A. Gault; Ian C. McDade; Gordon G. Shepherd

363

The GATE Boundary Layer Instrumentation System (BLIS)  

Science Conference Proceedings (OSTI)

A tethered sonde, the Boundary Layer Instrument System (BLIS), was designed for use from shipboard platforms in the GARP Atlantic Tropical Experiment (GATE). This system was able to monitor the thermal and kinematic properties of the boundary ...

Donald P. Wylie; Chester F. Ropelewski

1980-09-01T23:59:59.000Z

364

The Underway Conductivity–Temperature–Depth Instrument  

Science Conference Proceedings (OSTI)

The development of the Underway Conductivity–Temperature–Depth (UCTD) instrument is motivated by the desire for inexpensive profiles of temperature and salinity from underway vessels, including volunteer observing ships (VOSs) and research ...

Daniel L. Rudnick; Jochen Klinke

2007-11-01T23:59:59.000Z

365

X-Ray Nanoimaging: Instruments and Methods  

NLE Websites -- All DOE Office Websites (Extended Search)

X-Ray Nanoimaging: Instruments and Methods To be held as part of SPIE. http:spie.orgOP318 August 28-29, 2013; San Diego, California, USA...

366

SSCL RFQ-DTL Matching Section instrumentation  

Science Conference Proceedings (OSTI)

A description of the SSCL RFQ-DTL Matching Section instrumentation is presented with emphasis on design issues and early instrumentation commissioning results. The H{sup {minus}} beam energy through the RFQ-DTL matching section is 2.5 MeV, the beam current is 27 mA with a pulse width of 35 Its. The typical beam diameter is 3 mm. The instrumentation consists of three beam position monitors (BPM), a wire scanner, beam loss monitors (BLM), a slit and collector emittance measurement unit (EMU), a current toroid, and a Faraday cup. The instruments were designed to accommodate high current densities, have a large dynamic range with moderate bandwidths, and fit congested spaces.

Datte, P.; Aielo, R.; Hayworth, M. [and others

1993-11-01T23:59:59.000Z

367

ACRF Instrumentation Status: New, Current, and Future May 2007  

SciTech Connect

The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Program Climate Research Facility instrumentation status. The report is divided into four sections: (1) new instrumentation in the process of being acquired and deployed, (2) existing instrumentation and progress on improvements or upgrades, (3) proposed future instrumentation, and (4) Small Business Innovation Research instrument development.

JC Liljegren

2007-05-01T23:59:59.000Z

368

ACRF Instrumentation Status: New, Current, and Future February 2007  

Science Conference Proceedings (OSTI)

The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Program Climate Research Facility instrumentation status. The report is divided into four sections: (1) new instrumentation in the process of being acquired and deployed, (2) existing instrumentation and progress on improvements or upgrades, (3) proposed future instrumentation, and (4) Small Business Innovation Research instrument development

JC Liljegren

2007-02-01T23:59:59.000Z

369

INSTRUMENT FOR DETERMINING CRUSHING STRENGTH OF PARTICLES  

SciTech Connect

An instrument for crushing-strength determinations of uncoated and pyrolytic-carbon-coated fuel particles (50 to 500 mu in diameter) was developed to relate the crushing strength of the particles to their fabricability. The instrument consists of a loading mechanism, load cell, and a power supply-readout unit. The information that can be obtained by statistical methods of the data analysis is illustrated by results on two batches of fuel particles. (auth)

Hallerman, G.; Gray, R.J.

1963-11-29T23:59:59.000Z

370

Phone: (585) 419-0577 115 Sully's Trail, Suite 14 Pittsford, New York 14534-4562 FAX: (585) 218-0951 www.uaa.rochester.edu  

E-Print Network (OSTI)

- Servi¸co de Informa¸c~ao e Documenta¸c~ao (SID) EDITORA¸C~AO ELETR^ONICA: Viv´eca Sant´Ana Lemos - Servi qualquer forma ou por qualquer meio, eletr^onico, mec^anico, fotogr´afico, reprogr´afico, de microfilmagem

Pritchard, Jonathan

371

Enabling instrumentation and technology for 21st century light sources  

E-Print Network (OSTI)

in: Synchrotron Radiation Instrumentation Conference SRI09,2008 Workshop, Journal of Instrumentation, IOP. Detectors Aa t t o s e c o n d instrumentation, photon detectors f o r

Byrd, J.M.

2011-01-01T23:59:59.000Z

372

Model-based performance instrumentation of distributed applications  

Science Conference Proceedings (OSTI)

Problems such as inconsistent or erroneous instrumentation often plague applications whose source code ismanually instrumented during the implementation phase. Integrating performance instrumentation capabilities into theModel Driven Software Development ...

Jan Schaefer; Jeanne Stynes; Reinhold Kroeger

2008-06-01T23:59:59.000Z

373

"Insurance as a Risk Management Instrument for Energy Infrastructure...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

"Insurance as a Risk Management Instrument for Energy Infrastructure Security and Resilience" Report Now Available "Insurance as a Risk Management Instrument for Energy...

374

Utilization of instrumentation data to improve distributed multimedia processing.  

E-Print Network (OSTI)

??Instrumentation is ubiquitous in computer software today though its use in parallel processing frameworks is not widespread. In this thesis, we have developed an instrumentation… (more)

Kristoffersen, Ståle B

2011-01-01T23:59:59.000Z

375

Instrumentation for Southem Great Plains D. L. Sisterson and...  

NLE Websites -- All DOE Office Websites (Extended Search)

counties are outlined. 318 Instrumentation for Southern Great Plains Table 1. Dates of installations of Instrumentation, side data system versions, and facilities at the SGP...

376

DEVELOPMENT OF ELECTRO-OPTICAL INSTRUMENTATION FOR REACTOR SAFETY STUDIES  

E-Print Network (OSTI)

OPTICAL INSTRUMENTATION FOR REACTOR SAFETY STUDIES B.T.OPTICAL INSTRUMENTATION FOR REACTOR SAFETY STUDIES B.T.instru­ mentation for reactor safety studies is described.

Turko, B.T.

2010-01-01T23:59:59.000Z

377

Data Acquisition System - Instrument Support | ORNL Neutron Sciences  

NLE Websites -- All DOE Office Websites (Extended Search)

Acquisition & Controls The RAD Instrument Data Acquisition and Controls Group supports SNS neutron instruments by designing, building and maintaining custom electronics and...

378

Spring/dimple instrument tube restraint  

DOE Patents (OSTI)

A nuclear fuel assembly for a pressurized water nuclear reactor has a spring and dimple structure formed in a non-radioactive insert tube placed in the top of a sensor receiving instrumentation tube thimble disposed in the fuel assembly and attached at a top nozzle, a bottom nozzle, and intermediate grids. The instrumentation tube thimble is open at the top, where the sensor or its connection extends through the cooling water for coupling to a sensor signal processor. The spring and dimple insert tube is mounted within the instrumentation tube thimble and extends downwardly adjacent the top. The springs and dimples restrain the sensor and its connections against lateral displacement causing impact with the instrumentation tube thimble due to the strong axial flow of cooling water. The instrumentation tube has a stainless steel outer sleeve and a zirconium alloy inner sleeve below the insert tube adjacent the top. The insert tube is relatively non-radioactivated inconel alloy. The opposed springs and dimples are formed on diametrically opposite inner walls of the insert tube, the springs being formed as spaced axial cuts in the insert tube, with a web of the insert tube between the cuts bowed radially inwardly for forming the spring, and the dimples being formed as radially inward protrusions opposed to the springs. 7 figures.

DeMario, E.E.; Lawson, C.N.

1993-11-23T23:59:59.000Z

379

Spring/dimple instrument tube restraint  

DOE Patents (OSTI)

A nuclear fuel assembly for a pressurized water nuclear reactor has a spring and dimple structure formed in a non-radioactive insert tube placed in the top of a sensor receiving instrumentation tube thimble disposed in the fuel assembly and attached at a top nozzle, a bottom nozzle, and intermediate grids. The instrumentation tube thimble is open at the top, where the sensor or its connection extends through the cooling water for coupling to a sensor signal processor. The spring and dimple insert tube is mounted within the instrumentation tube thimble and extends downwardly adjacent the top. The springs and dimples restrain the sensor and its connections against lateral displacement causing impact with the instrumentation tube thimble due to the strong axial flow of cooling water. The instrumentation tube has a stainless steel outer sleeve and a zirconium alloy inner sleeve below the insert tube adjacent the top. The insert tube is relatively non-radioactivated inconel alloy. The opposed springs and dimples are formed on diametrically opposite inner walls of the insert tube, the springs being formed as spaced axial cuts in the insert tube, with a web of the insert tube between the cuts bowed radially inwardly for forming the spring, and the dimples being formed as radially inward protrusions opposed to the springs.

DeMario, Edmund E. (Columbia, SC); Lawson, Charles N. (Columbia, SC)

1993-01-01T23:59:59.000Z

380

A new Loan-Stock Financial Instrument  

E-Print Network (OSTI)

A new financial instrument (a new kind of a loan) is introduced. The loan-stock instrument (LSI) combines fixed rate instruments (loans, etc.) with other financial instruments that have higher volatilities and returns (stocks, mutual funds, currencies, derivatives, options, etc.). This new loan depends on the value of underlying security (for example, stock) in such a way that when underlying security increases, the value of loan decreases and backwards. The procedure to create a risk free portfolio and a technique to fairly price the LSI is described. The philosophy behind this procedure is quite similar to the Black-Scholes formalism in option theory. Creation of the risk free portfolio is possible because the change in the underlying security offsets the change in the value of the loan (or the amount that the borrower has to repay). The new financial instrument takes an advantage of the fact that on average the stock market grows in time. It is beneficial for both the borrower and the lender. The LSI is more attractive for the borrower than the traditional loan is due to the decrease in the amount that has to be repaid. This attractiveness constitutes the benefit for the lender in terms of the market share among the borrowers. In addition, the lender can charge the extra premium.

Alexander Morozovsky; Rajan Narasimhan; Yuri Kholodenko

2000-07-01T23:59:59.000Z

Note: This page contains sample records for the topic "aos instrument suite" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

3610 N. 44th Street, Suite 250, Phoenix, AZ 85018 ● Phone 602-808-2004 ●  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

10 N. 44th Street, Suite 250, Phoenix, AZ 85018 ● Phone 602-808-2004 ● Fax 602-808-2099 ● www.sunzia.net 10 N. 44th Street, Suite 250, Phoenix, AZ 85018 ● Phone 602-808-2004 ● Fax 602-808-2099 ● www.sunzia.net October 17, 2013 Transmitted via electronic mail to juliea.smith@hq.doe.gov and christopher.lawrence@hq.doe.gov Subject: SunZia Southwest Transmission Project comments on Department of Energy's August 29, 2013 Federal Register Notice regarding Improving Performance of Federal Permitting and Review of Infrastructure Projects. The following comments are provided to the Department of Energy (DOE) in response to the agency's request for information on (RFI) the draft Integrated Interagency Pre-Application (IIP) Process. These comments reflect the views and suggestions of the SunZia Southwest Transmission Project (SunZia). The Bureau of Land Management is the lead agency for processing our right-of-

382

Solar Decathlon 2007 Instrumentation and Monitoring  

NLE Websites -- All DOE Office Websites (Extended Search)

Solar Decathlon 2007 Solar Decathlon 2007 Instrumentation and Monitoring The Solar Decathlon Instrumentation and Monitoring Group (IMG), led by Mountain Energy Partnership (MEP) personnel, installed sensors and monitoring equipment in each house during assembly and removed the equipment during disassembly. The locations of sensors and monitoring equipment were planned in advance through negotiations between the organizers and each team. Installation had to be completed on the Mall at least two days before the start of the objectively measured contests (October 15, 2007). Most of the teams, despite their best intentions, were finishing construction of their houses during assembly on the Mall, which made installation of instrumentation a bit tricky. MEP is accustomed to working with the normal last-minute nature of

383

Moderators - Instrument Support | ORNL Neutron Sciences  

NLE Websites -- All DOE Office Websites (Extended Search)

Moderators Moderators Detailed design of scattering instruments requires detailed knowledge of the neutron beam emitted from the moderator in question. We are currently providing moderator performance estimates based on the result of detailed Monte Carlo simulations of the entire target system. These simulations are being performed for both the High Power Target Station (HPTS) and the Long Wavelength Target Station (LWTS), and have been performed for the Intense Pulsed Neutron Source (IPNS) in the same manner. We make the IPNS source files available as a means to benchmark instrument simulation codes. These files follow a particular "source file format" which will adapt to the changing needs of instrument simulation as necessary. We also provide worked examples showing how to use the information in the source files

384

MKS Instruments Inc | Open Energy Information  

Open Energy Info (EERE)

MKS Instruments Inc MKS Instruments Inc Jump to: navigation, search Name MKS Instruments Inc Place Wilmington, Massachusetts Zip 1887 Product Manufactures vacuum deposition equipment, with potential applications in PV manufacture. Coordinates 42.866922°, -72.868494° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":42.866922,"lon":-72.868494,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

385

Veeco Instruments Inc | Open Energy Information  

Open Energy Info (EERE)

Veeco Instruments Inc Veeco Instruments Inc Jump to: navigation, search Name Veeco Instruments Inc Place Woodbury, New York Zip 11797 Sector Solar Product US manufacturer of production equipment mostly for data storage but also for CIGS thin-film solar and LED MOCVD manufacturing equipment. Coordinates 44.440496°, -72.414991° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":44.440496,"lon":-72.414991,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

386

Solar Decathlon 2009 Instrumentation and Monitoring  

NLE Websites -- All DOE Office Websites (Extended Search)

2 2 Solar Decathlon 2009 Instrumentation and Monitoring The Solar Decathlon instrumentation team, led by Mountain Energy Partnership (MEP) personnel, installed data acquisition systems in each house during assembly and removed the systems during disassembly. The locations of sensors were planned in advance through negotiations between the organizers and each team. Installation had to be completed on the National Mall before the start of the objectively measured contests (October 8, 2009). Most of the teams, despite their best intentions, were finishing construction of their houses during assembly on the Mall, which made installation of instrumentation a bit tricky. MEP is accustomed to working with the normal last-minute nature of construction, and they were able to work with the teams to install equipment as

387

Solar Energy Research Center Instrumentation Facility  

DOE Green Energy (OSTI)

This laboratory provides access to modern spectroscopy and photolysis instrumentation for characterizing devices, materials and components on time scales ranging from femtoseconds to seconds and for elucidating mechanisms. The goals of this congressionally directed project included the purchase and installation of spectroscopy and photolysis instrumentation that would substantially and meaningfully enhance the capabilities of this laboratory. Some changes were made to the list of equipment proposed in the original budget. These changes did not represent a change in scope, approach or aims of this project. All of the capabilities and experiments represented in the original budget were maintained. The outcome of this Congressionally Directed Project has been the development of world-class fabrication and spectroscopy user facilities for solar fuels research at UNC-CH. This award has provided a significant augmentation of our pre-existing instrumentation capabilities which were funded by earlier UNC SERC projects, including the Energy Frontier

Meyer, Thomas, J.; Papanikolas, John, P.

2011-11-11T23:59:59.000Z

388

First Experience with the LHC Cryogenic Instrumentation  

E-Print Network (OSTI)

The LHC under commissioning at CERN will be the world's largest superconducting accelerator and therefore makes extensive use of cryogenic instruments. These instruments are installed in the tunnel and therefore have to withstand the LHC environment that imposes radiation-tolerant design and construction. Most of the instruments require individual calibration; some of them exhibit several variants as concerns measuring span; all relevant data are therefore stored in an Oracle® database. Those data are used for the various quality assurance procedures defined for installation and commissioning, as well as for generating tables used by the control system to configure automatically the input/output channels. This paper describes the commissioning of the sensors and the corresponding electronics, the first measurement results during the cool-down of one machine sector; it discusses the different encountered problems and their corresponding solutions.

Vauthier, N; Balle, Ch; Casas-Cubillos, J; Ciechanowski, M; Fernandez-Penacoba, G; Fortescue-Beck, E; Gomes, P; Jeanmonod, N; Lopez-Lorente, A; Suraci, A

2008-01-01T23:59:59.000Z

389

Instrumentation to Enhance Advanced Test Reactor Irradiations  

SciTech Connect

The Department of Energy (DOE) designated the Advanced Test Reactor (ATR) as a National Scientific User Facility (NSUF) in April 2007 to support U.S. leadership in nuclear science and technology. By attracting new research users - universities, laboratories, and industry - the ATR will support basic and applied nuclear research and development, further advancing the nation's energy security needs. A key component of the ATR NSUF effort is to prove new in-pile instrumentation techniques that are capable of providing real-time measurements of key parameters during irradiation. To address this need, an assessment of instrumentation available and under-development at other test reactors has been completed. Based on this review, recommendations are made with respect to what instrumentation is needed at the ATR and a strategy has been developed for obtaining these sensors. Progress toward implementing this strategy is reported in this document. It is anticipated that this report will be updated on an annual basis.

J. L. Rempe; D. L. Knudson; K. G. Condie; J. E. Daw; S. C. Taylor

2009-09-01T23:59:59.000Z

390

SYMBOLS FOR INSTRUMENT FLOWSHEETS AND DRAWINGS. A RECOMMENDED SYSTEM FOR APPLICATION TO ORNL INSTRUMENT WORK  

SciTech Connect

Details concerning a recommended system of flow-plan symbols and drawings are given. The system is designed to identify the function of all major instrument components and to show schematically the operation of the instrument relative to the particular process. The system is used for identification and designation. (J.R.D.)

Adams, R.K.; Davis, D.G.; Hyland, R.F.; Lieberman, B.

1962-06-19T23:59:59.000Z

391

ELSEVIER Nuclear Instruments and Methods in Physics Research A 403 (1998) 43 l-441 INSTRUMENTS  

E-Print Network (OSTI)

ELSEVIER Nuclear Instruments and Methods in Physics Research A 403 (1998) 43 l-441 INSTRUMENTS & METHODS IN PHYSICS RESEARCH Section A Theory of neutron fluctuations in source-driven subcritical systems I. P&At*, Y. Yamane' Department of Reactor Ph>aics, Chalmers Unicrrsi[\\' oj Technolo~~~. S-41-7 96

Pázsit, Imre

392

Instrument Performance Under Severe Accident Conditions: Ways to Acquire Information From Instrumentation Affected by an Accident  

Science Conference Proceedings (OSTI)

Under accident conditions, information is needed for diagnosing plant status and confirming plant responses to mitigative actions. This makes it important to understand how instruments behave in severe accident environments and to find ways to obtain information from the instruments under conditions that can be more severe than their design bases.

1993-12-01T23:59:59.000Z

393

Nuclear Instruments and Methods in Physics Research A 356 (1995) l-4 INSTRUMENTS  

E-Print Network (OSTI)

ELSEVIER Nuclear Instruments and Methods in Physics Research A 356 (1995) l-4 NUCLEAR INSTRUMENTS 8 METHODS IN PHYSICS REgtR?n Thermodynamics of dynamic nuclear polarization W.Th. Wenckebach Faculty ofApplied Physics, Delfr Unicersity of Technology, P.O.B. 5046, 2600 GA De& The Netherlands Abstract Dynamic nuclear

Dutz, Hartmut

394

Geothermal instrumentation development activities at Sandia  

DOE Green Energy (OSTI)

A major element of Sandia's Geothermal Technology Development Program is the effort directed toward development of instrumentation. This effort has two aspects, the development of high temperature components and prototype tools and the investigation of new concepts and capabilities. The focus of these activities is the acquisition of information to make geothermal drilling and resource development more efficient. Several projects of varying nature and scope make up the instrumentation development element, and this element will expand as the program emphasis on development of an advanced geothermal drilling system and the need for improved information grow. 13 refs.

Carson, C.C.

1985-03-01T23:59:59.000Z

395

Doc.366, 'Musical instruments and songs'  

E-Print Network (OSTI)

instruments and songs Translation of title Description (to be used in archive entry) Recording of musical instruments and songs: hand clapping, stamping tubes, gongs and songs, 15 min 21 seconds. 1) Hand clapping / hand clapping with bamboo stamping tubes... with an orchestra of gong and handclapping. Rakiraki, Kadavu, October 1955. [4.40 - 11.00] 3) Notes of 5 stamping tubes, sounded first separately, then all together. Lutu, Naitasiri, January 1956. [11.00 - 12.54] 4) Notes of 7 stamping tubes, sounded first...

Roth, George Kingsley

396

Neutron Instruments Added at Oak Ridge  

Science Conference Proceedings (OSTI)

The neutron scattering facilities at Oak Ridge National Laboratory continue their development as new instruments are commissioned and join the user program at the Spallation Neutron Source and High Flux Isotope Reactor. More than 640 proposals were received for beam time during the January-May 2011 period on SNS and HFIR instruments with about half either being accepted or identified as alternates. The proposal call for the period June-December 2011, announced at http://neutrons.ornl.gov, will close February 23, 2011.

Ekkebus, Allen E [ORNL

2011-01-01T23:59:59.000Z

397

Upgrades in thermal protection for downhole instruments  

DOE Green Energy (OSTI)

Measurement of geophysical parameters in progressively deeper and hotter wells has prompted design changes that improve the performance of downhole instruments and their associated thermal protection systems. This report provides a brief description of the mechanical and thermal loads to which these instruments and systems are subjected. Each design change made to the passive thermal protection system is described along with its resulting improvement. An outline of work being done to scope an active thermal protection system and the preliminary qualitative results are also described. 3 refs., 4 figs.

Bennett, G.A.

1985-01-01T23:59:59.000Z

398

Borehole survey instrumentation development for geothermal applications  

DOE Green Energy (OSTI)

The creation and subsequent study of hot dry rock geothermal reservoirs requires sophisticated tools and instruments that can function for relatively long periods of time in the hostile downhole environment. Detection of fracture dimensions and orientation of the geothermal reservoir is critical for the successful completion of the hot dry rock energy extraction system. The development of downhole instrumentation capable of characterizing the hydraulic-fracture systems must emphasize reliability of measuring devices and electro-mechanical components to function properly at borehole temperature exceeding 275/sup 0/C and pressures of 69 MPa (10,000 psi).

Dennis, B.R.

1980-01-01T23:59:59.000Z

399

BNL Meteorological Instrument Network Calibration Plan_Rev_0  

NLE Websites -- All DOE Office Websites (Extended Search)

Procedure ...39 Appendix J Meteorological Instrument Inventory Update and Change Action, Documentation Procedure ......

400

Buried Pipe Condition Assessment with Instrumented Vehicles  

Science Conference Proceedings (OSTI)

This report describes the evaluation of two technologies for the examination of buried piping in nuclear power plants. As part of this program, the electromagnetic and ultrasonic instrumented vehicles made by Hydroscope and Ucisco were used to examine two buried pipelines at the Palo Verde Nuclear Station.

2003-11-25T23:59:59.000Z

Note: This page contains sample records for the topic "aos instrument suite" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Advanced Instrumentation for Positron Emission Tomography [PET  

DOE R&D Accomplishments (OSTI)

This paper summarizes the physical processes and medical science goals that underlay modern instrumentation design for Positron Emission Tomography. The paper discusses design factors such as detector material, crystalphototube coupling, shielding geometry, sampling motion, electronics design, time-of-flight, and the interrelationships with quantitative accuracy, spatial resolution, temporal resolution, maximum data rates, and cost.

Derenzo, S. E.; Budinger, T. F.

1985-04-00T23:59:59.000Z

402

Instrumentation for interstellar exploration Mike Gruntman *  

E-Print Network (OSTI)

understanding of the nature of the local interstellar medium and explore the distant frontier of the solar for the interstellar study will concentrate on exploring the distant frontier of the solar system and the galacticInstrumentation for interstellar exploration Mike Gruntman * Department of Aerospace and Mechanical

Gruntman, Mike

403

Integrated polymerase chain reaction/electrophoresis instrument  

DOE Patents (OSTI)

A new approach and instrument for field identification of micro-organisms and DNA fragments using a small and disposable device containing integrated polymerase chain reaction (PCR) enzymatic reaction wells, attached capillary electrophoresis (CE) channels, detectors, and read-out all on/in a small hand-held package. The analysis instrument may be made inexpensively, for example, of plastic, and thus is disposable, which minimizes cross contamination and the potential for false positive identification between samples. In addition, it is designed for multiple users with individual applications. The integrated PCR/CE is manufactured by the PCR well and CE channels are "stamped" into plastic depressions where conductive coatings are made in the wells and ends of the CE microchannels to carry voltage and current to heat the PCR reaction mixtures and simultaneously draw DNA bands up the CE channels. Light is transmitted through the instrument at appropriate points and detects PCR bands and identifies DNA fragments by size (retention time) and quantifies each by the amount of light generated as each phototransistor positioned below each CE channel detects a passing band. The instrument is so compact that at least 100 PCR/CE reactions/analyses can be performed easily on one detection device.

Andresen, Brian D. (Livermore, CA)

2000-01-01T23:59:59.000Z

404

Cooling the dark energy camera instrument  

Science Conference Proceedings (OSTI)

DECam, camera for the Dark Energy Survey (DES), is undergoing general design and component testing. For an overview see DePoy, et al in these proceedings. For a description of the imager, see Cease, et al in these proceedings. The CCD instrument will be mounted at the prime focus of the CTIO Blanco 4m telescope. The instrument temperature will be 173K with a heat load of 113W. In similar applications, cooling CCD instruments at the prime focus has been accomplished by three general methods. Liquid nitrogen reservoirs have been constructed to operate in any orientation, pulse tube cryocoolers have been used when tilt angles are limited and Joule-Thompson or Stirling cryocoolers have been used with smaller heat loads. Gifford-MacMahon cooling has been used at the Cassegrain but not at the prime focus. For DES, the combined requirements of high heat load, temperature stability, low vibration, operation in any orientation, liquid nitrogen cost and limited space available led to the design of a pumped, closed loop, circulating nitrogen system. At zenith the instrument will be twelve meters above the pump/cryocooler station. This cooling system expected to have a 10,000 hour maintenance interval. This paper will describe the engineering basis including the thermal model, unbalanced forces, cooldown time, the single and two-phase flow model.

Schmitt, R.L.; Cease, H.; /Fermilab; DePoy, D.; /Ohio State U.; Diehl, H.T.; Estrada, J.; Flaugher, B.; /Fermilab; Kuhlmann, S.; /Ohio State U.; Onal, Birce; Stefanik, A.; /Fermilab

2008-06-01T23:59:59.000Z

405

Void fraction instrument acceptance test procedure  

DOE Green Energy (OSTI)

This acceptance test procedure (ATP) was written to test the void fraction instrument (VFI) and verify that the unit is ready for field service. The procedure verifies that the mechanical and electrical features (not specifically addressed in the software ATP) and software alarms are operating as designed.

Pearce, K.L.

1994-09-15T23:59:59.000Z

406

Microsoft Word - Instrument Status - Nov-Dec 2006 formatted .doc  

NLE Websites -- All DOE Office Websites (Extended Search)

5 5 ACRF Instrumentation Status: New, Current, and Future November-December 2006 James Liljegren ACRF Instrument Team Coordinator Work supported by the U.S. Department of Energy, Office of Science, Office of Biological and Environmental Research Summary The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Program Climate Research Facility instrumentation status. The report is divided into four sections: (1) new instrumentation in the process of being acquired and deployed, (2) existing instrumentation and progress on improvements or upgrades, (3) proposed future instrumentation, and (4) Small Business Innovation Research instrument development. New information is highlighted in

407

Microsoft Word - Instrument Status - January 2007 formatted.doc  

NLE Websites -- All DOE Office Websites (Extended Search)

ACRF Instrumentation Status: New, Current, and Future January 2007 James Liljegren ACRF Instrument Team Coordinator Work supported by the U.S. Department of Energy, Office of Science, Office of Biological and Environmental Research Summary The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Program Climate Research Facility instrumentation status. The report is divided into four sections: (1) new instrumentation in the process of being acquired and deployed, (2) existing instrumentation and progress on improvements or upgrades, (3) proposed future instrumentation, and (4) Small Business Innovation Research instrument development. New information is highlighted in

408

MODELANDO COMPUTAC ~AO QU^ANTICA EM HASKELL Resumo. O artigo desenvolve um modelo para a computac~ao qu^antica desde  

E-Print Network (OSTI)

. O modelo tamb´em ilustra algumas das dificuldades inerentes `a interpreta¸c~ao da mec^anica qu-se com uma interpreta¸c~ao da mec^anica qu^antica, a qual tem sido, e ainda ´e, assunto de debate entre

Sabry, Amr

409

Segmented instrumentation tube including a locking sleeve for interlocking the segments of the instrumentation tube  

DOE Patents (OSTI)

Segmented instrumentation tube including a locking sleeve for interlocking the segments of the instrumentation tube, so that the threaded ends of the instrumentation tube do not unthread when subjected to vibration, such an instrumentation tube being suitable for use in a nuclear reactor pressure vessel. The instrumentation tube has a first member having a threaded end portion that has a plurality of first holes circumferentially around the outside surface thereof. The instrumentation tube also has a second member having a threaded end portion that has a plurality of second holes circumferentially around the outside surface thereof. The threads of the second member are caused to threadably engage the threads of the first member for defining a threaded joint therebetween. A sleeve having an inside surface surrounds the end portion of the first member and the end portion of the second member and thus surrounds the threaded joint. The sleeve includes a plurality of first projections and second projections that outwardly extend from the inside surface to engage the first holes and the second holes, respectively. The outside surface of the sleeve is crimped or swaged at the locations of the first projections and second projections such that the first projections and the second projections engage their respective holes. In this manner, independent rotation of the first member with respect to the second member is prevented, so that the instrumentation tube will not unthread at its threaded joint.

Obermeyer, Franklin D. (Pensacola, FL)

1993-01-01T23:59:59.000Z

410

Segmented instrumentation tube including a locking sleeve for interlocking the segments of the instrumentation tube  

DOE Patents (OSTI)

Segmented instrumentation tube including a locking sleeve for interlocking the segments of the instrumentation tube, so that the threaded ends of the instrumentation tube do not unthread when subjected to vibration, such an instrumentation tube being suitable for use in a nuclear reactor pressure vessel. The instrumentation tube has a first member having a threaded end portion that has a plurality of first holes circumferentially around the outside surface thereof. The instrumentation tube also has a second member having a threaded end portion that has a plurality of second holes circumferentially around the outside surface thereof. The threads of the second member are caused to threadably engage the threads of the first member for defining a threaded joint there between. A sleeve having an inside surface surrounds the end portion of the first member and the end portion of the second member and thus surrounds the threaded joint. The sleeve includes a plurality of first projections and second projections that outwardly extend from the inside surface to engage the first holes and the second holes, respectively. The outside surface of the sleeve is crimped or swaged at the locations of the first projections and second projections such that the first projections and the second projections engage their respective holes. In this manner, independent rotation of the first member with respect to the second member is prevented, so that the instrumentation tube will not unthread at its threaded joint. 10 figures.

Obermeyer, F.D.

1993-11-16T23:59:59.000Z

411

PERFORMANCE CONFIRMATION IN-SITU INSTRUMENTATION  

Science Conference Proceedings (OSTI)

The purpose of this document is to identify and analyze the types of in-situ instruments and methods that could be used in support of the data acquisition portion of the Performance Confirmation (PC) program at the potential nuclear waste repository at Yucca Mountain. The PC program will require geomechanical , geophysical, thermal, and hydrologic instrumentation of several kinds. This analysis is being prepared to document the technical issues associated with each type of measurement during the PC period. This analysis utilizes the ''Performance Confirmation Input Criteria'' (CRWMS M&O 1999a) as its starting point. The scope of this analysis is primarily on the period after the start of waste package emplacement and before permanent closure of the repository, a period lasting between 15 and 300 years after last package emplacement (Stroupe 2000, Attachment 1, p. 1). The primary objectives of this analysis are to: (1) Review the design criteria as presented in the ''Performance Confirmation Input Criteria'' (CRWMS M&O 1999a). The scope of this analysis will be limited to the instrumentation related to parameters that require continuous monitoring of the conditions underground. (2) Preliminary identification and listing of the data requirements and parameters as related to the current repository layout in support of PC monitoring. (3) Preliminary identification of methods and instrumentation for the acquisition of the required data. Although the ''Performance Confirmation Input Criteria'' (CRWMS M&O 1999a) defines a broad range of data that must be obtained from a variety of methods, the focus of this analysis is on instrumentation related to the performance of the rock mass and the formation of water in the repository environment, that is obtainable from in-situ observation, testing, and monitoring.

N.T. Raczka

2000-05-23T23:59:59.000Z

412

SNR Denton US LLP 1301 K Street, NW Suite 600, East Tower Washington, DC 20005-3364 USA  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

SNR Denton US LLP SNR Denton US LLP 1301 K Street, NW Suite 600, East Tower Washington, DC 20005-3364 USA Thomas C. Jensen Partner thomas.jensen@snrdenton.com D +1 202 408 3956 M 703 304 5211 T +1 202 408 6400 F +1 202 408 6399 snrdenton.com March 28, 2012 BY E-MAIL Lamont Jackson Office of Electricity Delivery and Energy Reliability Mail Code: OE-20 U.S. Department of Energy 1000 Independence Avenue SW Washington, DC 20585 Re: OE Docket No. RRTT-IR-001 Dear Mr. Jackson:: This letter is submitted on behalf of PPL Electric and Public Service Electric and Gas Company ("PSE&G") 1 ,(referred to herein as "the Companies") with respect to the Susquehanna-Roseland

413

Assessment of the Value, Impact, and Validity of the Jobs and Economic Development Impacts (JEDI) Suite of Models  

SciTech Connect

The Jobs and Economic Development Impacts (JEDI) models, developed by the National Renewable Energy Laboratory (NREL) for the U.S. Department of Energy (DOE) Office of Energy Efficiency and Renewable Energy (EERE), use input-output methodology to estimate gross (not net) jobs and economic impacts of building and operating selected types of renewable electricity generation and fuel plants. This analysis provides the DOE with an assessment of the value, impact, and validity of the JEDI suite of models. While the models produce estimates of jobs, earnings, and economic output, this analysis focuses only on jobs estimates. This validation report includes an introduction to JEDI models, an analysis of the value and impact of the JEDI models, and an analysis of the validity of job estimates generated by JEDI model through comparison to other modeled estimates and comparison to empirical, observed jobs data as reported or estimated for a commercial project, a state, or a region.

Billman, L.; Keyser, D.

2013-08-01T23:59:59.000Z

414

Rapid TRANSIT to the Future Using UPK for Oracle’s E-Business Suite Executive Overview  

E-Print Network (OSTI)

This is a case study of how Denver Regional Transportation District (RTD) is utilizing Oracle’s User Productivity Kit (UPK) software to maximize efficiency and effectiveness in its training programs for the implementation and rollout of Oracle E-Business Suite and Maximus maintenance management applications. This paper will answer several key questions about the use of UPK during the project, as well as why organizations should leverage UPK for their education and training rollouts as well as ongoing maintenance of those programs. Introduction and Background Denver RTD operates a public transportation system in an eight county service area with Denver, CO at the center. RTD is involved in several major transportation projects in the Denver metropolitan area including FasTracks, a 12 year regional transportation plan to improve and expand bus and rapid transit and T-REX, a combined light rail and highway expansion project. Involvement in both of these projects required RTD to

A Solbourne

2007-01-01T23:59:59.000Z

415

ARM Climate Research Facility Monthly Instrument Report August 2010  

SciTech Connect

The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Climate Research Facility instrumentation status. The report is divided into the following five sections: (1) new instrumentation in the process of being acquired and deployed, (2) field campaigns, (3) existing instrumentation and progress on improvements or upgrades, (4) proposed future instrumentation, and (5) Small Business Innovation Research instrument development.

Voyles, JW

2010-09-28T23:59:59.000Z

416

ARM Climate Research Facility Instrumentation Status and Information December 2009  

Science Conference Proceedings (OSTI)

The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Climate Research Facility instrumentation status. The report is divided into the following five sections: (1) new instrumentation in the process of being acquired and deployed, (2) field campaigns, (3) existing instrumentation and progress on improvements or upgrades, (4) proposed future instrumentation, and (5) Small Business Innovation Research instrument development.

JW Voyles

2010-12-30T23:59:59.000Z

417

ARM Climate Research Facility Monthly Instrument Report September 2010  

SciTech Connect

The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Climate Research Facility instrumentation status. The report is divided into the following five sections: (1) new instrumentation in the process of being acquired and deployed, (2) field campaigns, (3) existing instrumentation and progress on improvements or upgrades, (4) proposed future instrumentation, and (5) Small Business Innovation Research instrument development.

Voyles, JW

2010-10-18T23:59:59.000Z

418

NBT Baicheng New Energy Development aka Ao Lu Jia New Energy Development |  

Open Energy Info (EERE)

NBT Baicheng New Energy Development aka Ao Lu Jia New Energy Development NBT Baicheng New Energy Development aka Ao Lu Jia New Energy Development Jump to: navigation, search Name NBT (Baicheng) New Energy Development (aka Ao Lu Jia New Energy Development) Place China Sector Wind energy Product China-based Sino-Norwegian joint venture that develops wind projects. References NBT (Baicheng) New Energy Development (aka Ao Lu Jia New Energy Development)[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. NBT (Baicheng) New Energy Development (aka Ao Lu Jia New Energy Development) is a company located in China . References ↑ "[ NBT (Baicheng) New Energy Development (aka Ao Lu Jia New Energy Development)]" Retrieved from "http://en.openei.org/w/index.php?title=NBT_Baicheng_New_Energy_Development_aka_Ao_Lu_Jia_New_Energy_Development&oldid=349122

419

ARM Surface Meteorology Systems Instrument Handbook  

Science Conference Proceedings (OSTI)

The ARM Surface Meteorology Systems consist mainly of conventional in situ sensors that obtain a defined “core” set of measurements. The core set of measurements is: Barometric Pressure (kPa), Temperature (°C), Relative Humidity (%), Arithmetic-Averaged Wind Speed (m/s), Vector-Averaged Wind Speed (m/s), and Vector-Averaged Wind Direction (deg). The sensors that collect the core variables are mounted at the standard heights defined for each variable: • Winds: 10 meters • Temperature and Relative Humidity: 2 meters • Barometric Pressure: 1 meter. Depending upon the geographical location, different models and types of sensors may be used to measure the core variables due to the conditions experienced at those locations. Most sites have additional sensors that measure other variables that are unique to that site or are well suited for the climate of the location but not at others.

Ritsche, MT

2011-03-08T23:59:59.000Z

420

Acoustic Imaging Suite  

INL’s acoustic imaging technology improves methods of capturing moving images of a specified object by using a photorefractive effect to produce a full-field image of the object without using a probe to perform a full scan of the object. INL ...

Note: This page contains sample records for the topic "aos instrument suite" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Hardware Workmanship Test Suite  

Science Conference Proceedings (OSTI)

... Section 6.4.3, General Build Quality; Part 1 Section 6.4.4, Durability; Part 1 ... complete version of the VVSG-NI in HTML, MS-Word, or PDF formats can ...

2010-10-05T23:59:59.000Z

422

Why Test Suites  

Science Conference Proceedings (OSTI)

In the marketplace, testing provides a vehicle for exchanging information ... For sellers (eg, manufacturers), testing can help to substantiate claims that ...

2012-11-02T23:59:59.000Z

423

ARM - Campaign Instrument - s-band-profiler  

NLE Websites -- All DOE Office Websites (Extended Search)

govInstrumentss-band-profiler govInstrumentss-band-profiler Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Campaign Instrument : NOAA S-band (2835 Mhz) Profiler (S-BAND-PROFILER) Instrument Categories Cloud Properties, Atmospheric Profiling Campaigns CRYSTAL-FACE [ Download Data ] Off Site Campaign : various, including non-ARM sites, 2002.06.26 - 2002.08.01 Midlatitude Continental Convective Clouds Experiment (MC3E): Multi-Frequency Profilers [ Download Data ] Southern Great Plains, 2011.04.22 - 2011.06.06 Tropical Warm Pool - International Cloud Experiment (TWP-ICE) [ Download Data ] Tropical Western Pacific, 2006.01.21 - 2006.02.13 Primary Measurements Taken The following measurements are those considered scientifically relevant. Refer to the datastream (netcdf) file headers for the list of all available

424

Solar Decathlon 2005, Instrumentation and Monitoring  

NLE Websites -- All DOE Office Websites (Extended Search)

Decathlon 2005: The Event in Review Decathlon 2005: The Event in Review Web Site Resources: Instrumentation and Monitoring 1 Solar Decathlon 2005, Instrumentation and Monitoring The Solar Decathlon organizers installed sensors and monitoring equipment in each house during assembly and removed the equipment during disassembly. (Some of the equipment was installed on prior visits to the teams' sites on their campuses during construction.) The locations of sensors and monitoring equipment were planned in advance through negotiations between the organizers and each team. Installation had to be completed on the Mall at least two days before the start of the objectively measured contests (October 10, 2005). Most of the teams, despite their very best intentions, were finishing construction of their houses during assembly on the Mall, which made

425

Choppers - Instrument Support | ORNL Neutron Sciences  

NLE Websites -- All DOE Office Websites (Extended Search)

Neutron Choppers Neutron Choppers The primary mission of the Neutron Chopper Team is to provide functional, reliable, safe, and operationally proven neutron chopper systems as required by the SNS instrument beam lines. Type of Choppers Activities Facilities Equipment TOP2 T0 chopper installed and operating in a CTF lower level chopper test bay. (Click for a larger picture) Chopper technician Bill Jordan recording chopper balance data. Types of Choppers Neutron choppers are rotating mechanical devices designed to block the neutron beam for some fraction of each revolution of the chopper. Our goal is to have at least three different functional classes of neutron choppers available for user experiments. Most, if not all, of these will be designed in standard forms that are interchangeable among the instruments. Most

426

ARM - Campaign Instrument - rad-air  

NLE Websites -- All DOE Office Websites (Extended Search)

govInstrumentsrad-air govInstrumentsrad-air Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Campaign Instrument : Airborne Radiometers (RAD-AIR) Instrument Categories Radiometric, Airborne Observations Campaigns Indirect and Semi-Direct Aerosol Campaign (ISDAC) [ Download Data ] North Slope Alaska, 2008.04.01 - 2008.04.30 Routine AAF CLOWD Optical Radiative Observations (RACORO) [ Download Data ] Southern Great Plains, 2009.01.22 - 2009.06.30 Routine AAF CLOWD Optical Radiative Observations (RACORO) [ Download Data ] Southern Great Plains, 2009.01.22 - 2009.06.30 Routine AAF CLOWD Optical Radiative Observations (RACORO) [ Download Data ] Southern Great Plains, 2009.01.22 - 2009.06.30 Primary Measurements Taken The following measurements are those considered scientifically relevant.

427

ARM - Campaign Instrument - smart-rad  

NLE Websites -- All DOE Office Websites (Extended Search)

govInstrumentssmart-rad govInstrumentssmart-rad Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Campaign Instrument : Broadband Radiometers from NASA SMART Trailer (SMART-RAD) Instrument Categories Radiometric Campaigns Application of the ARM Mobile Facility (AMF) to Study the Aerosol Indirect Effects in China [ Download Data ] Shouxian, Anhui, China; Mobile Facility, 2008.05.15 - 2008.12.29 Primary Measurements Taken The following measurements are those considered scientifically relevant. Refer to the datastream (netcdf) file headers for the list of all available measurements, including those recorded for diagnostic or quality assurance purposes. Longwave broadband downwelling irradiance Shortwave broadband total downwelling irradiance

428

Signal conditioning circuitry design for instrumentation systems.  

SciTech Connect

This report details the current progress in the design, implementation, and validation of the signal conditioning circuitry used in a measurement instrumentation system. The purpose of this text is to document the current progress of a particular design in signal conditioning circuitry in an instrumentation system. The input of the signal conditioning circuitry comes from a piezoresistive transducer and the output will be fed to a 250 ksps, 12-bit analog-to-digital converter (ADC) with an input range of 0-5 V. It is assumed that the maximum differential voltage amplitude input from the sensor is 20 mV with an unknown, but presumably high, sensor bandwidth. This text focuses on a specific design; however, the theory is presented in such a way that this text can be used as a basis for future designs.

Larsen, Cory A.

2012-01-01T23:59:59.000Z

429

Solar Energy Research Center Instrumentation Facility  

Science Conference Proceedings (OSTI)

SOLAR ENERGY RESEARCH CENTER INSTRUMENTATION FACILITY The mission of the Solar Energy Research Center (UNC SERC) at the University of North Carolina at Chapel Hill (UNC-CH) is to establish a world leading effort in solar fuels research and to develop the materials and methods needed to fabricate the next generation of solar energy devices. We are addressing the fundamental issues that will drive new strategies for solar energy conversion and the engineering challenges that must be met in order to convert discoveries made in the laboratory into commercially available devices. The development of a photoelectrosynthesis cell (PEC) for solar fuels production faces daunting requirements: (1) Absorb a large fraction of sunlight; (2) Carry out artificial photosynthesis which involves multiple complex reaction steps; (3) Avoid competitive and deleterious side and reverse reactions; (4) Perform 13 million catalytic cycles per year with minimal degradation; (5) Use non-toxic materials; (6) Cost-effectiveness. PEC efficiency is directly determined by the kinetics of each reaction step. The UNC SERC is addressing this challenge by taking a broad interdisciplinary approach in a highly collaborative setting, drawing on expertise across a broad range of disciplines in chemistry, physics and materials science. By taking a systematic approach toward a fundamental understanding of the mechanism of each step, we will be able to gain unique insight and optimize PEC design. Access to cutting-edge spectroscopic tools is critical to this research effort. We have built professionally-staffed facilities equipped with the state-of the-art instrumentation funded by this award. The combination of staff, facilities, and instrumentation specifically tailored for solar fuels research establishes the UNC Solar Energy Research Center Instrumentation Facility as a unique, world-class capability. This congressionally directed project funded the development of two user facilities: TASK 1: SOLAR DEVICE FABRICATION LABORATORY DEVELOPMENT The space allocated for this laboratory was �¢����shell space�¢��� that required an upfit in order to accommodate nano-fabrication equipment in a quasi-clean room environment. This construction project (cost $279,736) met the non-federal cost share requirement of $250,000 for this award. The central element of the fabrication laboratory is a new $400,000+ stand-alone system, funded by other sources, for fabricating and characterizing photovoltaic devices, in a state-of-the-art nanofabrication environment. This congressionally directed project also included the purchase of an energy dispersive x-ray analysis (EDX) detector for a pre-existing transmission electron microscope (TEM). This detector allows elemental analysis and elemental mapping of materials used to fabricate solar energy devices which is a key priority for our research center. TASK 2: SOLAR ENERGY SPECTROSCOPY LABORATORY DEVELOPMENT (INSTRUMENTATION) This laboratory provides access to modern spectroscopy and photolysis instrumentation for characterizing devices, materials and components on time scales ranging from femtoseconds to seconds and for elucidating mechanisms. The goals of this congressionally directed project included the purchase and installation of spectroscopy and photolysis instrumentation that would substantially and meaningfully enhance the capabilities of this laboratory. Some changes were made to the list of equipment proposed in the original budget. These changes did not represent a change in scope, approach or aims of this project. All of the capabilities and experiments represented in the original budget were maintained. The outcome of this Congressionally Directed Project has been the development of world-class fabrication and spectroscopy user facilities for solar fuels research at UNC-CH. This award has provided a significant augmentation of our pre-existing instrumentation capabilities which were funded by earlier UNC SERC projects, including the Energy Frontier

Meyer, Thomas, J.; Papanikolas, John, P.

2011-11-11T23:59:59.000Z

430

ICFA instrumentation bulletin, Volume 15, Fall 1997  

DOE Green Energy (OSTI)

The Bulletin reports on research and progress in the field of instrumentation with emphasis in the field of high-energy physics. This volume contains the following four papers: (1) Streamers in MSGC's and Other Gaseous Detectors; (2) Soft X-Ray Production in Spark Discharges in Hydrogen, Nitrogen, Air, Argon, and Xenon Gases; (3) Beam Tests of the CLEO III LiF-TEA Ring Imaging Cherenkov Detector; and (4) Electron Multiplication and Secondary Scintillation in Liquid Xenon: New Prospects.

Va'vra, J. [ed.

1997-12-01T23:59:59.000Z

431

New beam instrumentation in the AGS Booster  

SciTech Connect

The AGS Booster was designed to accelerate beams from 2{times}10{sup 10} polarized protons to 1.5{times}10{sup 13} protons and heavy ions through Au{sup +33}. The range of beam parameters and the high vacuum, and radiation environment presented challenges for the beam instrumentation. Some interesting beam monitors in the Booster and transport lines, will be described. Where available, results will be presented. 21 refs., 7 figs.

Witkover, R.L.

1991-01-01T23:59:59.000Z

432

Demonstration of Advanced Boiler Instrumentation Technologies  

Science Conference Proceedings (OSTI)

New and increasing limits on emissions (in particular, NOx) and new emphasis on heat rate have underscored the need to measure flue gas constituents more accurately and in more locations. Utilities are making large capital investments in boiler improvements and emission control devices. These investments can be enhanced through the use of innovative, on-line instrumentation closer to the furnace combustion zone. Traditionally, sensors for flue gas constituents, such as NOx and CO, are implemented as part...

2005-03-31T23:59:59.000Z

433

Preservation of Laboratory Instruments in Static Storage  

SciTech Connect

It is desirable to place laboratory instruments in static storage so that they may be put into operation with only normal servicing. Such instruments may be subject to many forms of deterioration. There may be deterioration of metal parts due to chemical and electrolytic corrosion and the effects of moisture, excessive dryness, and microorganisms, i.e., mildew on organic parts. To preserve such instruments without disassembly or troublesome surface coatings, requires methods that will remove the major cause of deterioration - that is, excessive humidity, by reducing and maintaining the relative humidity of the air surrounding the item at 30 per cent or less. It is also necessary to eliminate or separate hygroscopic materials from the item since they will cause corrosion, by surface adsorption and condensation, even though a dry atmosphere is maintained. The methods and materials used must not only be efficient and economical but also require a minimun of maintenance, Protection against physical damage and temperature extremes is dependent upon the storage site and is not considered in this report.

Gregg, J. L.; Shackelford, M. A.

1950-02-22T23:59:59.000Z

434

SAFETY INSTRUMENTED FUNCTIONS AS CRITICALITY DEFENSES  

SciTech Connect

The objective of this paper is to share the SRS methodology for identifying the reliability requirements and documenting the expected performance of Safety Instrumented Functions (SIFs) used as criticality defenses. Nuclear Criticality SIFs are comprised of sensors, logic solvers, and final control elements, which may be either automatic or manual, to detect a process hazard and respond to prevent a criticality. The Savannah River Site (SRS) has invoked the chemical process industry safety standard (ANSI/ISA 84.00.01) for the design of safety significant instrumented systems. The ISA standard provides a graded approach to design based on the amount of risk reduction that is required of an SIF. SRS is embarking on application of this standard to nuclear criticality defenses, thus integrating criticality safety requirements with verifiable design methodology. Per the DOE G 421.1-1 discussion of the double contingency principle, guidance for a single contingency barrier includes, ''The estimated probability that the control will fail (when called upon for protection) is not greater than 1 in 100 demands''. The application of this standard to nuclear criticality SIFs will provide clear requirements in terms of safety availability and testing to assure that the instrumented criticality system as designed, installed, and maintained will meet is performance requirements. The paper identifies the numerous challenges presented by this initiative and the benefits of this approach.

Suttinger, L; William Hearn, W

2007-03-26T23:59:59.000Z

435

Instrument and Source Design Division | ORNL Neutron Sciences  

NLE Websites -- All DOE Office Websites (Extended Search)

Ron Crone, RRD Director Ron Crone, RRD Director ISDD Director Ron Crone. Instrument and Source Design Division The Instrument and Source Design Division (ISDD) supports the engineering and development of scientific instruments at the High Flux Isotope Reactor and the Spallation Neutron Source. ISDD continuously develops facilities and capabilities associated with neutron science through research and development. Organization Chart A PDF version of the ISDD Organization Chart is available. Key Division Contacts Director Ron Crone Administrative Assistant Wendy Brooks HFIR Instrument Engineering Doug Selby SNS Instrument Engineering David Vandergriff Instrumentation Projects and Development Ken Herwig Project Management/Operations and Analysis Barbara Thibadeau Source Development and Engineering Analysis Phil Ferguson

436

Renewable Energy Financial Instruments Guidance Tool (REFINe) | Open Energy  

Open Energy Info (EERE)

Renewable Energy Financial Instruments Guidance Tool (REFINe) Renewable Energy Financial Instruments Guidance Tool (REFINe) Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Renewable Energy Financial Instruments Guidance Tool (REFINe) Focus Area: Renewable Energy Topics: Policy Impacts Website: web.worldbank.org/WBSITE/EXTERNAL/TOPICS/EXTENERGY2/0,,contentMDK:2298 Equivalent URI: cleanenergysolutions.org/content/renewable-energy-financial-instrument Language: English Policies: "Deployment Programs,Financial Incentives" is not in the list of possible values (Deployment Programs, Financial Incentives, Regulations) for this property. DeploymentPrograms: Training & Education Renewable Energy Financial Instruments Guidance Tool (REFINe) aims to assist policy in identifying appropriate financial instruments to scale-up

437

Instrument development continues in Oak Ridge  

Science Conference Proceedings (OSTI)

Peer review panels composed of 80 external scientists recently visited Oak Ridge National Laboratory (ORNL) to review almost 700 proposals for experiments on 23 instruments at the Spallation Neutron Source (SNS) and High Flux Isotope Reactor (HFIR). These were proposed for the time period from January-June 2012. About 40% of the proposals were approved for beam time and 20% were placed on an alternate list if time becomes available. The Hybrid Spectrometer HYSPEC at SNS began its commissioning in September 2011. HYSPEC is otpimized for studying low energy dynamics in single-crystal samples using a broad variety of sample environments, and is equipped with a polarization analysis capability. It is expected to be available for users on a limited basis in the second half of 2012. The detector tank of CORELLI has been installed on beamline 9 at SNS. Now that the tank is in place, banks of neutron detectors and boron carbide shielding will be installed around the interior. CORELLI is optimized to probe complex disorder in crystalline materials through diffuse scattering from single-crystal samples. It will begin commissioning in 2014. CORELLI is one of four instruments being developed under the SING II (SNS Instruments Next Generation II) project. The others are the Macromolecular Neutron Diffractometer (MANDI), the Vibrational Spectrometer (VISION, scheduled to begin commissioning in 2012), and the Time of Flight Ultra Small Angle Neutron Scattering Instrument (TOF-USANS). The single crystal neutron diffractometer IMAGINE, was deliverd to HFIR in October 2011. Preliminary testing has been carried out. IMAGINE will provide atomic resolution information on chemical, organic, metallo-organic and protein single crystals that will enable their chemical, physical and biological structure and function to be understood. This instrument will benefit scientists with interests in pharmaceuticals, minerals and other inorganic crystals, small molecules, molecular organo-metallic crystals and metal-organic frameworks (MOFs) molecular crystal structures. The quasi-Laue geometry, combined with a large solid angle detector, will enable rapid data collection from crystals with volume < 1mm{sup 1} and unit cell < 100 {angstrom}. Construction and installation of the optical system is in progress. Commissioning is expected to start in April 2012.

Ekkebus, Allen E [ORNL

2012-01-01T23:59:59.000Z

438

Contrast analysis and stability on the ExAO testbed  

SciTech Connect

High-contrast adaptive optics systems, such as those needed to image extrasolar planets, are known to require excellent wavefront control and diffraction suppression. The Laboratory for Adaptive Optics at UC Santa Cruz is investigating limits to high-contrast imaging in support of the Gemini Planet Imager. Previous contrast measurements were made with a simple single-opening prolate spheroid shaped pupil that produced a limited region of high-contrast, particularly when wavefront errors were corrected with the 1024-actuator Boston Micromachines MEMS deformable mirror currently in use on the testbed. A more sophisticated shaped pupil is now being used that has a much larger region of interest facilitating a better understanding of high-contrast measurements. In particular we examine the effect of heat sources in the testbed on PSF stability. We find that rms image motion scales as 0.02 {lambda}/D per watt when the heat source is near the pupil plane. As a result heat sources of greater than 5 watts should be avoided near pupil planes for GPI. The safest place to introduce heat is near a focal plane. Heat also can effect the standard deviation of the high-contrast region but in the final instrument other sources of error should be more significant.

Evans, J; Thomas, S; Gavel, D; Dillon, D; Macintosh, B

2008-06-10T23:59:59.000Z

439

Departamento de Matematica do IST, Secc~ao de Algebra e Analise Analise Matematica III  

E-Print Network (OSTI)

por arcos. Teorema fundamental do c´alculo para inte- grais de linha. Conserva¸c~ao de energia mec^anica

Lisboa, Universidade Técnica de

440

A.O. Smith Corporation Response to Preliminary Plan for Retrospective...  

NLE Websites -- All DOE Office Websites (Extended Search)

Plan for Retrospective Analysis of A.O. Smith Corporation is the largest manufacturer of residential and commercial water heating equipment in the United States. We have the...

Note: This page contains sample records for the topic "aos instrument suite" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Um Sistema de Animac~ao Baseado em Movimento Fernando Wagner Serpa Vieira da Silva  

E-Print Network (OSTI)

a nitro-celulose. #12;CAP ITULO 1. INTRODUC ~AO 2 1895 Louis e Auguste Lumi#12;ere conseguem uma patente

442

Geologic Sequestration Software Suite (GS3): a collaborative approach to the management of geological GHG storage projects  

Science Conference Proceedings (OSTI)

Geologic storage projects associated with large anthropogenic sources of greenhouse gases (GHG) will have lifecycles that may easily span a century, involve several numerical simulation cycles, and have distinct modeling teams. The process used for numerical simulation of the fate of GHG in the subsurface follows a generally consistent sequence of steps that often are replicated by scientists and engineers around the world. Site data is gathered, assembled, interpreted, and assimilated into conceptualizations of a solid-earth model; assumptions are made about the processes to be modeled; a computational domain is specified and spatially discretized; driving forces and initial conditions are defined; the conceptual models, computational domain, and driving forces are translated into input files; simulations are executed; and results are analyzed. Then, during and after the GHG injection, a continuous monitoring of the reservoir is done and models are updated with the newly collected data. Typically the working files generated during all these steps are maintained on workstations with local backups and archived once the project has concluded along with any modeling notes and records. We are proposing a new concept for supporting the management of full-scale GHG storage projects where collaboration, flexibility, accountability and long-term access will be essential features: the Geologic Sequestration Software Suite, GS3.

Bonneville, Alain HR; Black, Gary D.; Gorton, Ian; Hui, Peter SY; Murphy, Ellyn M.; Murray, Christopher J.; Rockhold, Mark L.; Schuchardt, Karen L.; Sivaramakrishnan, Chandrika; White, Mark D.; Williams, Mark D.; Wurstner, Signe K.

2011-01-23T23:59:59.000Z

443

ELIMINATING CONSERVATISM IN THE PIPING SYSTEM ANALYSIS PROCESS THROUGH APPLICATION OF A SUITE OF LOCALLY APPROPRIATE SEISMIC INPUT MOTIONS  

SciTech Connect

Seismic analysis is of great importance in the evaluation of nuclear systems due to the heavy influence such loading has on their designs. Current Department of Energy seismic analysis techniques for a nuclear safety-related piping system typically involve application of a single conservative seismic input applied to the entire system [1]. A significant portion of this conservatism comes from the need to address the overlapping uncertainties in the seismic input and in the building response that transmits that input motion to the piping system. The approach presented in this paper addresses these two sources of uncertainty through the application of a suite of 32 input motions whose collective performance addresses the total uncertainty while each individual motion represents a single variation of it. It represents an extension of the soil-structure interaction analysis methodology of SEI/ASCE 43-05 [2] from the structure to individual piping components. Because this approach is computationally intensive, automation and other measures have been developed to make such an analysis efficient. These measures are detailed in this paper.

Anthony L. Crawford; Robert E. Spears, Ph.D.; Mark J. Russell

2009-07-01T23:59:59.000Z

444

Development of extensible virtual instruments for SCADA applications  

Science Conference Proceedings (OSTI)

This paper presents an architecture and design of a solution for virtual instrumentation in SCADA systems. The aim of this approach is to propose a way to design virtual instrumentation based on software components, which ensures uniform, consistent ...

Traian Turc; Adrian Gligor; Cristian Dumitru; Alexandru Morar

2010-05-01T23:59:59.000Z

445

A PRECISION PROGRAMMABLE BIPOLAR V/f INSTRUMENTATION MODULE  

E-Print Network (OSTI)

O R M A L BIPOLAR V/f INSTRUMENTATION MODULE* R G A M B E W.PROGRAMMABLE BIPOLAR V / f INSTRUMENTATION MODULE W.E. H e a

Hearn, W.E.

2010-01-01T23:59:59.000Z

446

Chameleon Guitar : a physical heart in a digital instrument  

E-Print Network (OSTI)

Today's tools and instruments, whether musical or graphical, fall into two very distinct classes, each with its own benefits and drawbacks. Traditional physical instruments offer a richness and uniqueness of qualities that ...

Zoran, Amit (Amit Shlomo)

2009-01-01T23:59:59.000Z

447

Calibrating Broadband UV Instruments: Ozone and Solar Zenith Angle Dependence  

Science Conference Proceedings (OSTI)

A UV spectroradiometer was installed at Mauna Loa Observatory (MLO), Hawaii, in July 1995. This instrument has been employed to characterize several broadband UV instruments of a type commonly used to estimate erythemal irradiance at many sites ...

Barry A. Bodhaine; Ellsworth G. Dutton; Richard L. McKenzie; Paul V. Johnston

1998-08-01T23:59:59.000Z

448

Pre-EUCREX Intercomparison of Airborne Humidity Measuring Instruments  

Science Conference Proceedings (OSTI)

During the pre-EUCREX (European Cloud and Radiation Experiment) intercomparison of airborne instrumentation in January 1992, nine hygrometers mounted on three different aircraft were compared. Although the different instruments are based on ...

J. Ström; R. Busen; M. Quante; B. Guillemet; P. R. A. Brown; J. Heintzenberg

1994-10-01T23:59:59.000Z

449

Design of a CCN Instrument for Airborne Measurement  

Science Conference Proceedings (OSTI)

A new instrument for measuring cloud condensation nuclei (CCN) on board small aircraft is described. Small aircraft are attractive mainly because they are less costly, but they require instruments that are designed for minimum weight, volume, and ...

Patrick Y. Chuang; Athanasios Nenes; James N. Smith; Richard C. Flagan; John H. Seinfeld

2000-08-01T23:59:59.000Z

450

An Analysis and Comparison of Five Water Droplet Measuring Instruments  

Science Conference Proceedings (OSTI)

Five different instruments have been used routinely by the University of Wyoming for aircraft measurements of water droplets. A study has been conducted in which the measurement accuracies of these instruments are analyzed and evaluated. This ...

Darrel Baumgardner

1983-05-01T23:59:59.000Z

451

Tank SY-101 void fraction instrument functional design criteria  

DOE Green Energy (OSTI)

This document presents the functional design criteria for design, analysis, fabrication, testing, and installation of a void fraction instrument for Tank SY-101. This instrument will measure the void fraction in the waste in Tank SY-101 at various elevations.

McWethy, L.M.

1994-10-18T23:59:59.000Z

452

ARM - ARM Instrumentation Status: New, Current, and Future  

NLE Websites -- All DOE Office Websites (Extended Search)

Instrumentation Status: New, Current, and Future Publications Journal Articles Conference Documents Program Documents Technical Reports Publications Database Public Information...

453

Final system instrumentation design package for decade 80 solar house  

DOE Green Energy (OSTI)

This system instrumentation design package reflects the final configuration of the Decade 80 solar house to monitor and collect system performance data. The system instrumentation acceptance review was held on June 14, 1977. This review demonstrated by actual operation that the system and the data acquisition subsystem operated satisfactorily and installation of instrumentation was in accordance with the design. This design package is made up of: site and system description, operating and control modes, and instrumentation program (including sensor schematic).

Not Available

1978-12-01T23:59:59.000Z

454

Remote Synchrotron Light Instrumentation Using Optical Fibers  

Science Conference Proceedings (OSTI)

By coupling the emitted synchrotron light into an optical fiber, it is possible to transmit the signal at substantial distances from the light port, without the need to use expensive beamlines. This would be especially beneficial in all those cases when the synchrotron is situated in areas not easily access because of their location, or due to high radiation levels. Furthermore, the fiber output can be easily switched, or even shared, between different diagnostic instruments. We present the latest results on the coupling and dispersion measurements performed at the Advanced Light Source in Berkeley. In several cases, coupling synchrotron light into optical fibers can substantially facilitate the use of beam diagnostic instrumentation that measures longitudinal beam properties by detecting synchrotron radiation. It has been discussed in with some detail, how fiberoptics can bring the light at relatively large distances from the accelerator, where a variety of devices can be used to measure beam properties and parameters. Light carried on a fiber can be easily switched between instruments so that each one of them has 100% of the photons available, rather than just a fraction, when simultaneous measurements are not indispensable. From a more general point of view, once synchrotron light is coupled into the fiber, the vast array of techniques and optoelectronic devices, developed by the telecommunication industry becomes available. In this paper we present the results of our experiments at the Advanced Light Source, where we tried to assess the challenges and limitations of the coupling process and determine what level of efficiency one can typically expect to achieve.

De Santis, S.; Yin, Y.

2009-05-04T23:59:59.000Z

455

Instrument Series: Microscopy Atom Probe The LEAP  

NLE Websites -- All DOE Office Websites (Extended Search)

Atom Probe Atom Probe The LEAP ® 4000 XHR local electrode atom probe tomography instrument enabled the first- ever comprehensive and accurate 3-D chemical imaging studies of low electrical conductivity materials, such as ceramics, semiconductors and oxides. The LEAP capability is assisting EMSL's efforts to further scientific advancements in interface analysis and microstructural characterization, providing a new tool for understanding the relationship between the nanoscale structure of materials and their macroscopic properties. Research Applications Geochemistry - Studying chemical processes that compose rocks and soils has long been used to determine matter cycles and transport in the environment, which supports critical EMSL research in areas including bioremediation.

456

A Light-Weight Instrumentation System Design  

Science Conference Proceedings (OSTI)

To meet challenging constraints on telemetry system weight and volume, a custom Light-Weight Instrumentation System was developed to collect vehicle environment and dynamics on a short-duration exo-atmospheric flight test vehicle. The total telemetry system, including electronics, sensors, batteries, and a 1 watt transmitter weighs about 1 kg. Over 80 channels of measurement, housekeeping, and telemetry system diagnostic data are transmitted at 128 kbps. The microcontroller-based design uses the automotive industry standard Controller Area Network to interface with and support in-flight control fimctions. Operational parameters are downloaded via a standard asynchronous serial communications intefiace. The basic design philosophy and functionality is described here.

Kidner, Ronald

1999-06-02T23:59:59.000Z

457

Quantum Metrology Subject to Instrumentation Constraints  

E-Print Network (OSTI)

Maximizing the precision in estimating parameters in a quantum system subject to instrumentation constraints is cast as a convex optimization problem. We account for prior knowledge about the parameter range by developing a worst-case and average case objective for optimizing the precision. Focusing on the single parameter case, we show that the optimization problems are {\\em linear programs}. For the average case the solution to the linear program can be expressed analytically and involves a simple search: finding the largest element in a list. An example is presented which compares what is possible under constraints against the ideal with no constraints, the Quantum Fisher Information.

Robert L. Kosut

2008-03-29T23:59:59.000Z

458

Calibration of solar radiation measuring instruments. Final report  

DOE Green Energy (OSTI)

A review of solar radiation measurement of instruments and some types of errors is given; and procedures for calibrating solar radiation measuring instruments are detailed. An appendix contains a description of various agencies who perform calibration of solar instruments and a description of the methods they used at the time this report was prepared. (WHK)

Bahm, R J; Nakos, J C

1979-11-01T23:59:59.000Z

459

THE Q/U IMAGING EXPERIMENT INSTRUMENT  

SciTech Connect

The Q/U Imaging ExperimenT (QUIET) is designed to measure polarization in the cosmic microwave background, targeting the imprint of inflationary gravitational waves at large angular scales({approx}1 Degree-Sign ). Between 2008 October and 2010 December, two independent receiver arrays were deployed sequentially on a 1.4 m side-fed Dragonian telescope. The polarimeters that form the focal planes use a compact design based on high electron mobility transistors (HEMTs) that provides simultaneous measurements of the Stokes parameters Q, U, and I in a single module. The 17-element Q-band polarimeter array, with a central frequency of 43.1 GHz, has the best sensitivity (69 {mu}Ks{sup 1/2}) and the lowest instrumental systematic errors ever achieved in this band, contributing to the tensor-to-scalar ratio at r < 0.1. The 84-element W-band polarimeter array has a sensitivity of 87 {mu}Ks{sup 1/2} at a central frequency of 94.5 GHz. It has the lowest systematic errors to date, contributing at r < 0.01. The two arrays together cover multipoles in the range l {approx} 25-975. These are the largest HEMT-based arrays deployed to date. This article describes the design, calibration, performance, and sources of systematic error of the instrument.

Bischoff, C.; Brizius, A.; Buder, I.; Kusaka, A.; Smith, K. M.; Bogdan, M. [Kavli Institute for Cosmological Physics, Department of Physics, Enrico Fermi Institute, The University of Chicago, Chicago, IL 60637 (United States); Chinone, Y. [High Energy Accelerator Research Organization (KEK), 1-1 Oho, Tsukuba, Ibaraki 305-0801 (Japan); Cleary, K.; Reeves, R. [Cahill Center for Astronomy and Astrophysics, California Institute of Technology, 1200 E. California Blvd M/C 249-17, Pasadena, CA 91125 (United States); Dumoulin, R. N.; Newburgh, L. B. [Department of Physics and Columbia Astrophysics Laboratory, Columbia University, New York, NY 10027 (United States); Monsalve, R.; Bustos, R. [Department of Physics, University of Miami, 1320 Campo Sano Drive, Coral Gables, FL 33146 (United States); Naess, S. K. [Institute of Theoretical Astrophysics, University of Oslo, P.O. Box 1029 Blindern, N-0315 Oslo (Norway); Nixon, G. [Joseph Henry Laboratories of Physics, Jadwin Hall, Princeton University, Princeton, NJ 08544 (United States); Vanderlinde, K. [Department of Physics, McGill University, 3600 Rue University, Montreal, Quebec H3A 2T8 (Canada); Wehus, I. K. [Department of Physics, University of Oslo, P.O. Box 1048 Blindern, N-0316 Oslo (Norway); Church, S. E. [Kavli Institute for Particle Astrophysics and Cosmology and Department of Physics, Stanford University, Varian Physics Building, 382 Via Pueblo Mall, Stanford, CA 94305 (United States); Davis, R.; Dickinson, C., E-mail: newburgh@princeton.edu [Jodrell Bank Centre for Astrophysics, Alan Turing Building, School of Physics and Astronomy, University of Manchester, Oxford Road, Manchester M13 9PL (United Kingdom); and others

2013-05-01T23:59:59.000Z

460

The Physics of Brass Musical Instruments  

Science Conference Proceedings (OSTI)

It is easy to think of a trumpet as a device for transmitting sound into a room. Actually, very little of the sound in a trumpet escapes to the outside. Most of the sound in a trumpet stays inside, where it forms standing waves that draw energy from the player's lips. I will show why sound traveling in a tube tends to reflect from an open end. Brass musical instruments consist of a mouthpiece, a conical lead pipe, a cylindrical section, and a flared bell. I build a trumpet to show the acoustical significance of these parts. Brass instruments rely on valves (or, in the case of the trombone, a slide) to extend the length of the tubing. In this they are unlike the woodwinds, which rely on side holes. In the era before valves, horn players learned to augment their meager supply of open notes by partially or completely blocking the air column with their right hands. Even through the modern horn relies on valves (rather than on this hand technique), horn players still keep their hands in the bell. I demonstrate the acoustical and musical significance of the right hand in horn playing.

Holmes, Brian (San Jose State University)

2004-10-06T23:59:59.000Z

Note: This page contains sample records for the topic "aos instrument suite" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Microfabricated instrument for tissue biopsy and analysis  

DOE Patents (OSTI)

A microfabricated biopsy/histology instrument which has several advantages over the conventional procedures, including minimal specimen handling, smooth cutting edges with atomic sharpness capable of slicing very thin specimens (approximately 2 .mu.m or greater), micro-liter volumes of chemicals for treating the specimens, low cost, disposable, fabrication process which renders sterile parts, and ease of use. The cutter is a "cheese-grater" style design comprising a block or substrate of silicon and which uses anisotropic etching of the silicon to form extremely sharp and precise cutting edges. As a specimen is cut, it passes through the silicon cutter and lies flat on a piece of glass which is bonded to the cutter. Microchannels are etched into the glass or silicon substrates for delivering small volumes of chemicals for treating the specimen. After treatment, the specimens can be examined through the glass substrate. For automation purposes, microvalves and micropumps may be incorporated. Also, specimens in parallel may be cut and treated with identical or varied chemicals. The instrument is disposable due to its low cost and thus could replace current expensive microtome and histology equipment.

Krulevitch, Peter A. (Pleasanton, CA); Lee, Abraham P. (Walnut Creek, CA); Northrup, M. Allen (Berkeley, CA); Benett, William J. (Livermore, CA)

1999-01-01T23:59:59.000Z

462

Geothermal Logging Instrumentation Development Program Plan (U)  

DOE Green Energy (OSTI)

This Geothermal Logging Instrumentation Development Program Plan outlines a nine-year, industry-based program to develop and apply high temperature instrumentation technology which is needed by the borehole logging industry to serve the rapidly expanding geothermal market. Specifically, this program will upgrade existing materials and sondes to improve their high-temperature reliability. To achieve this goal specialized equipment such as high temperature electronics, cables and devices for measuring formation temperature, flow rate, downhole pressure, and fractures will be developed. In order to satisfy critical existing needs, the near-term (FY80) goal is for operation at or above 275/sup 0/C in pressures up to 48.3 MPa (7,000 psi). The long-term (FY84) goal is for operation up to 350/sup 0/C and 138 MPa (20,000 psi). This program plan has been prepared for the Department of Energy's Division of Geothermal Energy (DGE) and is a portion of the DGE long-range Geothermal Well Technology Program.

Veneruso, A.F.; Polito, J.; Heckman, R.C.

1978-08-01T23:59:59.000Z

463

LIST/BMI Turbines Instrumentation and Infrastructure  

E-Print Network (OSTI)

In support of two major SNL programs, the Long-term Inflow and Structural Test (LIST) program and the Blade Manufacturing Initiative (BMI), three Micon 65/13M wind turbines have been erected at the USDA Agriculture Research Service (ARS) center in Bushland, Texas. The inflow and structural response of these turbines are being monitored with an array of 60 instruments: 34 to characterize the inflow, 19 to characterize structural response and 7 to characterize the time-varying state of the turbine. The primary characterization of the inflow into the LIST turbine relies upon an array of five sonic anemometers. Primary characterization of the structural response of the turbine uses several sets of strain gauges to measure bending loads on the blades and the tower and two accelerometers to measure the motion of the nacelle. Data are sampled at a rate of 30 Hz using a newly developed data acquisition system. The system features a time-synchronized continuous data stream and telemetered data from the turbine rotor. This paper documents the instruments and infrastructure that have been developed to monitor these turbines and their inflow. TABLE OF CONTENTS Abstract ......................................................................................................................................3 Table of Contents .......................................................................................................................4 List of Tables .............................................................................................................................7 List of Figures ............................................................................................................................8

Perry L. Jones; Herbert J. Sutherland; Byron A. Neal

2001-01-01T23:59:59.000Z

464

LIST/BMI Turbines Instrumentation and Infrastructure  

SciTech Connect

In support of two major SNL programs, the Long-term Inflow and Structural Test (LIST) program and the Blade Manufacturing Initiative (BMI), three Micon 65/13M wind turbines have been erected at the USDA Agriculture Research Service (ARS) center in Bushland, Texas. The inflow and structural response of these turbines are being monitored with an array of 60 instruments: 34 to characterize the inflow, 19 to characterize structural response and 7 to characterize the time-varying state of the turbine. The primary characterization of the inflow into the LIST turbine relies upon an array of five sonic anemometers. Primary characterization of the structural response of the turbine uses several sets of strain gauges to measure bending loads on the blades and the tower and two accelerometers to measure the motion of the nacelle. Data are sampled at a rate of 30 Hz using a newly developed data acquisition system. The system features a time-synchronized continuous data stream and telemetered data from the turbine rotor. This paper documents the instruments and infrastructure that have been developed to monitor these turbines and their inflow.

JONES,PERRY L.; SUTHERLAND,HERBERT J.; NEAL,BYRON A.

2001-06-01T23:59:59.000Z

465

Generation of a suite of 3D computer-generated breast phantoms from a limited set of human subject data  

SciTech Connect

Purpose: The authors previously reported on a three-dimensional computer-generated breast phantom, based on empirical human image data, including a realistic finite-element based compression model that was capable of simulating multimodality imaging data. The computerized breast phantoms are a hybrid of two phantom generation techniques, combining empirical breast CT (bCT) data with flexible computer graphics techniques. However, to date, these phantoms have been based on single human subjects. In this paper, the authors report on a new method to generate multiple phantoms, simulating additional subjects from the limited set of original dedicated breast CT data. The authors developed an image morphing technique to construct new phantoms by gradually transitioning between two human subject datasets, with the potential to generate hundreds of additional pseudoindependent phantoms from the limited bCT cases. The authors conducted a preliminary subjective assessment with a limited number of observers (n= 4) to illustrate how realistic the simulated images generated with the pseudoindependent phantoms appeared. Methods: Several mesh-based geometric transformations were developed to generate distorted breast datasets from the original human subject data. Segmented bCT data from two different human subjects were used as the 'base' and 'target' for morphing. Several combinations of transformations were applied to morph between the 'base' and 'target' datasets such as changing the breast shape, rotating the glandular data, and changing the distribution of the glandular tissue. Following the morphing, regions of skin and fat were assigned to the morphed dataset in order to appropriately assign mechanical properties during the compression simulation. The resulting morphed breast was compressed using a finite element algorithm and simulated mammograms were generated using techniques described previously. Sixty-two simulated mammograms, generated from morphing three human subject datasets, were used in a preliminary observer evaluation where four board certified breast radiologists with varying amounts of experience ranked the level of realism (from 1 ='fake' to 10 ='real') of the simulated images. Results: The morphing technique was able to successfully generate new and unique morphed datasets from the original human subject data. The radiologists evaluated the realism of simulated mammograms generated from the morphed and unmorphed human subject datasets and scored the realism with an average ranking of 5.87 {+-} 1.99, confirming that overall the phantom image datasets appeared more 'real' than 'fake.' Moreover, there was not a significant difference (p > 0.1) between the realism of the unmorphed datasets (6.0 {+-} 1.95) compared to the morphed datasets (5.86 {+-} 1.99). Three of the four observers had overall average rankings of 6.89 {+-} 0.89, 6.9 {+-} 1.24, 6.76 {+-} 1.22, whereas the fourth observer ranked them noticeably lower at 2.94 {+-} 0.7. Conclusions: This work presents a technique that can be used to generate a suite of realistic computerized breast phantoms from a limited number of human subjects. This suite of flexible breast phantoms can be used for multimodality imaging research to provide a known truth while concurrently producing realistic simulated imaging data.

Hsu, Christina M. L. [Department of Biomedical Engineering, Duke University, Durham, North Carolina 27708 and Carl E. Ravin Advanced Imaging Laboratories, Duke University Medical Center, Durham, North Carolina 27705 (United States); Palmeri, Mark L. [Department of Biomedical Engineering, Duke University, Durham, North Carolina 27708 (United States); Department of Anesthesiology, Duke University Medical Center, Durham, North Carolina 27710 (United States); Segars, W. Paul [Carl E. Ravin Advanced Imaging Laboratories, Duke University Medical Center, Durham, North Carolina 27705 (United States); Department of Radiology, Duke University Medical Center, Durham, North Carolina 27710 (United States); Department of Biomedical Engineering, Duke University, Durham, North Carolina 27708 (United States); Medical Physics Graduate Program, Duke University, Durham, North Carolina 27705 (United States); Veress, Alexander I. [Department of Mechanical Engineering, University of Washington, Seattle, Washington 98195 (United States); Dobbins, James T. III [Carl E. Ravin Advanced Imaging Laboratories, Duke University Medical Center, Durham, North Carolina 27705 (United States); Department of Radiology, Duke University Medical Center, Durham, North Carolina 27710 (United States); Department of Biomedical Engineering, Duke University, Durham, North Carolina 27708 (United States); Medical Physics Graduate Program, Duke University, Durham, North Carolina 27705 (United States); Department of Physics, Duke University, Durham, North Carolina 27708 (United States)

2013-04-15T23:59:59.000Z

466

Accommodating subject and instrument variations in spectroscopic determinations  

DOE Patents (OSTI)

A method and apparatus for measuring a biological attribute, such as the concentration of an analyte, particularly a blood analyte in tissue such as glucose. The method utilizes spectrographic techniques in conjunction with an improved instrument-tailored or subject-tailored calibration model. In a calibration phase, calibration model data is modified to reduce or eliminate instrument-specific attributes, resulting in a calibration data set modeling intra-instrument or intra-subject variation. In a prediction phase, the prediction process is tailored for each target instrument separately using a minimal number of spectral measurements from each instrument or subject.

Haas, Michael J. (Albuquerque, NM); Rowe, Robert K. (Corrales, NM); Thomas, Edward V. (Albuquerque, NM)

2006-08-29T23:59:59.000Z

467

FAQS Qualification Card - Instrumentation and Control | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Instrumentation and Control Instrumentation and Control FAQS Qualification Card - Instrumentation and Control A key element for the Department's Technical Qualification Programs is a set of common Functional Area Qualification Standards (FAQS) and associated Job Task Analyses (JTA). These standards are developed for various functional areas of responsibility in the Department, including oversight of safety management programs identified as hazard controls in Documented Safety Analyses (DSA). For each functional area, the FAQS identify the minimum technical competencies and supporting knowledge and skills for a typical qualified individual working in the area. FAQC-InstrumentationAndControl.docx Description Instrumentation and Control Qualification Card More Documents & Publications

468

4240 Carson Street, Suite 102 Denver, CO 80239 www.sre3.com SOLAR ELECTRIC SOLAR WATER HEATING ENERGY AUDITS A/C & HEATING INSULATION LIGHTING  

E-Print Network (OSTI)

4240 Carson Street, Suite 102 Denver, CO 80239 www.sre3.com SOLAR ELECTRIC SOLAR WATER HEATING for homeowners, businesses, and government entities that assist them in lowering utility bills, reducing a unique solutions approach based on the RE3 concept, which includes: · Review ­ current energy usage

Colorado at Boulder, University of

469

SNS Instrument System Beam Lines | ORNL Neutron Sciences  

NLE Websites -- All DOE Office Websites (Extended Search)

SNS Instrument Beam Lines SNS Instrument Beam Lines This diagram shows the beam lines designated for currently funded instruments. Clicking on an instrument description will take you to the page for that instrument. Clicking anywhere else on the image will open a full-size, printable PDF file. SNS Instrument Layout Backscattering Spectrometer (BASIS) Disordered Materials Diffractometer (NOMAD) Wide Angular-Range Chopper Spectrometer (ARCS) Fine-Resolution Fermi Chopper Spectrometer (SEQUOIA) Coming Soon - Vibrational Spectrometer (VISION) Neutron Spin Echo (NSE) Hybrid Spectrometer (HYSPEC) Fundamental Neutron Physics Beamline (FNPB) Single Crystal Diffractometer (TOPAZ) Versatile Neutron Imaging Instrument (VENUS) Macromolecular Diffractometer (MaNDi) Powder Diffractometer (POWGEN3) Engineering Diffractometer (VULCAN) Extended Q-Range Small Angle Neutron Diffractometer (EQ-SANS) Cold Neutron Chopper Spectrometer (CNCS) Liquids (horizontal surface) Reflectometer (LR) Magnetic Advanced Grazing InCidence Spectrometer (MAGICS) High Pressure Diffractometer (SNAP) Coming Soon - Elastic Diffuse Scattering Spectrometer (CORELLI)

470

Soliant Energy formerly Practical Instruments Inc | Open Energy Information  

Open Energy Info (EERE)

Soliant Energy formerly Practical Instruments Inc Soliant Energy formerly Practical Instruments Inc Jump to: navigation, search Name Soliant Energy (formerly Practical Instruments Inc) Place Pasadena, California Zip 91107 Product US-based designer and manufacturer of concentraing PV silicon modules, with tracking systems. Aims for the rooftop market. References Soliant Energy (formerly Practical Instruments Inc)[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Soliant Energy (formerly Practical Instruments Inc) is a company located in Pasadena, California . References ↑ "Soliant Energy (formerly Practical Instruments Inc)" Retrieved from "http://en.openei.org/w/index.php?title=Soliant_Energy_formerly_Practical_Instruments_Inc&oldid=351479"

471

Guidelines for Instrument Calibration Extension/Reduction -- Revision 1: Statistical Analysis of Instrument Calibration Data  

Science Conference Proceedings (OSTI)

Calibration reduction or fuel cycle extension efforts require an analysis of plant-specific instrument performance to demonstrate that the longer calibration interval will not result in larger than expected drift. This manual provides a methodology and guidelines for evaluating historical calibration data, and addresses technical issues associated with the application of the analysis results.

1998-10-30T23:59:59.000Z

472

The application of formal software engineering methods to the unattended and remote monitoring software suite at Los Alamos National Laboratory  

SciTech Connect

The Unattended and Remote Monitoring (UNARM) system is a collection of specialized hardware and software used by the International Atomic Energy Agency (IAEA) to institute nuclear safeguards at many nuclear facilities around the world. The hardware consists of detectors, instruments, and networked computers for acquiring various forms of data, including but not limited to radiation data, global position coordinates, camera images, isotopic data, and operator declarations. The software provides two primary functions: the secure and reliable collection of this data from the instruments and the ability to perform an integrated review and analysis of the disparate data sources. Several years ago the team responsible for maintaining the software portion of the UNARM system began the process of formalizing its operations. These formal operations include a configuration management system, a change control board, an issue tracking system, and extensive formal testing, for both functionality and reliability. Functionality is tested with formal test cases chosen to fully represent the data types and methods of analysis that will be commonly encountered. Reliability is tested with iterative, concurrent testing where up to five analyses are executed simultaneously for thousands of cycles. Iterative concurrent testing helps ensure that there are no resource conflicts or leaks when multiple system components are in use simultaneously. The goal of this work is to provide a high quality, reliable product, commensurate with the criticality of the application. Testing results will be presented that demonstrate that this goal has been achieved and the impact of the introduction of a formal software engineering framework to the UNARM product will be presented.

Determan, John Clifford [Los Alamos National Laboratory; Longo, Joseph F [Los Alamos National Laboratory; Michel, Kelly D [Los Alamos National Laboratory

2009-01-01T23:59:59.000Z

473

Armored instrumentation cable for geothermal well logging  

DOE Green Energy (OSTI)

Multiconductor armored well-logging cable is used extensively by the oil and natural gas industry to lower various instruments used to measure the geological and geophysical parameters into deep wellbores. Advanced technology in oil-well drilling makes it possible to achieve borehole depths of 9 km (30,000 ft). The higher temperatures in these deeper boreholes demand advancements in the design and manufacturing of wireline cable and in the electrical insulating and armoring materials used as integral components. If geothermal energy is proved an abundant economic resource, drilling temperatures approaching and exceeding 300/sup 0/C will become commonplace. The adaptation of teflons as electrical insulating material permitted use of armored cable in geothermal wellbores where temperatures are slightly in excess of 200/sup 0/C, and where the concentrations of corrosive minerals and gases are high. Teflon materials presently used in wireline cables, however, are not capable of continuous operation at the anticipated higher temperatures.

Dennis, B.R.; Johnson, J.; Todd, B.

1981-01-01T23:59:59.000Z

474

Instrumentation and Control Functional Area Qualification Standard  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

NOT MEASUREMENT NOT MEASUREMENT SENSITIVE DOE-STD-1162-2013 June 2013 DOE STANDARD INSTRUMENTATION AND CONTROL FUNCTIONAL AREA QUALIFICATION STANDARD DOE Defense Nuclear Facilities Technical Personnel U.S. Department of Energy AREA TRNG Washington, D.C. 20585 DISTRIBUTION STATEMENT A: Approved for public release; distribution is unlimited. DOE-STD-1162-2013 This document is available on the Department of Energy Technical Standards Program website at http://www.hss.energy.gov/nuclearsafety/ns/techstds/ ii DOE-STD-1162-2013 APPROVAL The Federal Technical Capability Panel consists of senior U.S. Department of Energy (DOE) managers responsible for overseeing the Federal Technical Capability Program. This Panel is responsible for reviewing and approving the qualification standard for Department-wide

475

Early instrumentation projects at the SSC  

Science Conference Proceedings (OSTI)

Conceptual designs for some SSC instrumentation is given. Stripline beam position monitors, appropriate for cryogenic operation are described, along with plans for their A/D conversion and recording. A global timing system based on fibre optics is described; it is to be capable of {plus minus}100 psec accuracy over many tens of kilometers. Stabilization is patterned after a scheme in use at CERN. Timing pulses (roughly 60 MHz) as well as pulses synchronized to the various frequency modulated RF systems are distributed and scaled by digital clocks situated at those locations where accurate timing is required. Finally, a digital control circuit to be used for synchronizing beam transfer the Low Energy Booster to the Medium Energy Booster is described. It is based on controlling the relative phases of the two RF systems even though one of the frequencies is variable. 4 refs., 10 figs.

Martin, D.J.; Mestha, L.K.; Miller, S.A.; Talman, R.

1990-04-01T23:59:59.000Z

476

Highly damped kinematic coupling for precision instruments  

SciTech Connect

A highly damped kinematic coupling for precision instruments. The kinematic coupling provides support while causing essentially no influence to its nature shape, with such influences coming, for example, from manufacturing tolerances, temperature changes, or ground motion. The coupling uses three ball-cone constraints, each combined with a released flexural degree of freedom. This arrangement enables a gain of higher load capacity and stiffness, but can also significantly reduce the friction level in proportion to the ball radius divided by the distance between the ball and the hinge axis. The blade flexures reduces somewhat the stiffness of the coupling and provides an ideal location to apply constrained-layer damping which is accomplished by attaching a viscoelastic layer and a constraining layer on opposite sides of each of the blade flexures. The three identical ball-cone flexures provide a damped coupling mechanism to kinematically support the projection optics system of the extreme ultraviolet lithography (EUVL) system, or other load-sensitive apparatus.

Hale, Layton C. (Livermore, CA); Jensen, Steven A. (Livermore, CA)

2001-01-01T23:59:59.000Z

477

SUNRISE: INSTRUMENT, MISSION, DATA, AND FIRST RESULTS  

SciTech Connect

The SUNRISE balloon-borne solar observatory consists of a 1 m aperture Gregory telescope, a UV filter imager, an imaging vector polarimeter, an image stabilization system, and further infrastructure. The first science flight of SUNRISE yielded high-quality data that revealed the structure, dynamics, and evolution of solar convection, oscillations, and magnetic fields at a resolution of around 100 km in the quiet Sun. After a brief description of instruments and data, the first qualitative results are presented. In contrast to earlier observations, we clearly see granulation at 214 nm. Images in Ca II H display narrow, short-lived dark intergranular lanes between the bright edges of granules. The very small-scale, mixed-polarity internetwork fields are found to be highly dynamic. A significant increase in detectable magnetic flux is found after phase-diversity-related reconstruction of polarization maps, indicating that the polarities are mixed right down to the spatial resolution limit and probably beyond.

Solanki, S. K.; Barthol, P.; Danilovic, S.; Feller, A.; Gandorfer, A.; Hirzberger, J.; Riethmueller, T. L.; Schuessler, M. [Max-Planck-Institut fuer Sonnensystemforschung, Max-Planck-Str. 2, 37191 Katlenburg-Lindau (Germany); Bonet, J. A.; Pillet, V. MartInez [Instituto de Astrofisica de Canarias, C/Via Lactea s/n, 38200 La Laguna, Tenerife (Spain); Del Toro Iniesta, J. C. [Instituto de Astrofisica de AndalucIa (CSIC), Apdo. de Correos 3004, E-18080, Granada (Spain); Domingo, V.; Palacios, J. [Grupo de AstronomIa y Ciencias del Espacio, Universidad de Valencia, E-46980, Paterna, Valencia (Spain); Knoelker, M. [High Altitude Observatory, National Center for Atmospheric Research, P.O. Box 3000, Boulder, CO 80307-3000 (United States); Gonzalez, N. Bello; Berkefeld, T.; Franz, M.; Schmidt, W. [Kiepenheuer-Institut fuer Sonnenphysik, Schoeneckstr. 6, 79104 Freiburg (Germany); Title, A. M., E-mail: solanki@mps.mpg.d [Lockheed-Martin Solar and Astrophysical Lab., Palo Alto, CA 94304 (United States)

2010-11-10T23:59:59.000Z

478

INSTRUMENTATION AND COMPUTER BASED DATA ACQUISTION FOR IN-SITU ROCK PROPERTY MEASUREMENTS  

E-Print Network (OSTI)

and R. Lingle, "Rock Instrumentation Problems Experiencedand R. Haught, "Instrumentation Evaluation, Calibration, andUniversity of California. INSTRUMENTATION AND COMPUTER BASED

Binnall, Eugene P.

2013-01-01T23:59:59.000Z

479

Sensitive Detection of CMB B-Mode Polarization : : Instrumentation and Systematics  

E-Print Network (OSTI)

CMB B-Mode Polarization: Instrumentation and Systematics AFar-Infrared Detectors and Instrumentation for Astronomy VI,Far-Infrared Detectors and Instrumentation for Astronomy VI,

Moyerman, Stephanie

480

DEVELOPMENTS IN ACCELERATORS AND INSTRUMENTATION RELEVANT TO IMAGING WITH CHARGED PARTICLES AND POSITRON EMITTERS  

E-Print Network (OSTI)

IN ACCELERATORS AND INSTRUMENTATION RELEVANT TO IMAGING WITHin Accelerators and Instrumentation Relevant to Imaging withto develop necessary instrumentation and techniques for the

Alonso, J.R.

2010-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "aos instrument suite" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

RECENT BEAM MEASUREMENTS AND NEW INSTRUMENTATION AT THE ADVANCED LIGHT SOURCE  

E-Print Network (OSTI)

A M MEASUREMENTS AND NEW INSTRUMENTATION A T T H E ADVANCEDbeamlines and o f the instrumentation and beam diagnosticbeam diagnostics and instrumentation have followed a similar

Sannibale, Fernando

2008-01-01T23:59:59.000Z

482

An Investigation of Deformation and Fluid Flow at Subduction Zones Using Newly Developed Instrumentation and Finite Element Modeling  

E-Print Network (OSTI)

by offshore hydrologic instrumentation monitoring in thewith continuous GPS instrumentation and seismic networks [Using Newly Developed Instrumentation and Finite Element

LaBonte, Alison L

2007-01-01T23:59:59.000Z

483

An investigation of deformation and fluid flow at subduction zones using newly developed instrumentation and finite element modeling  

E-Print Network (OSTI)

by offshore hydrologic instrumentation monitoring in thewith continuous GPS instrumentation and seismic networks [Using Newly Developed Instrumentation and Finite Element

LaBonte, Alison Louise

2007-01-01T23:59:59.000Z

484

Instrumentation2: Other instruments, ghost/satellite bunch monitoring, halo, emittance, new developments  

E-Print Network (OSTI)

In order to estimate in absolute terms the luminosity of LHC certain beam parameters have to be measured very accurately. In particular the total beam current and the relative distribution of the charges around the ring, the transverse size of the beams at the interaction points and the relative position of the beams at the interaction point. The experiments can themselves measure several of these parameters very accurately thanks to the versatility of their detectors, other parameters need however to be measured using the monitors installed on the machine. The beam instrumentation is usually built for the purpose of aiding the operation team in setting up and optimizing the beams, often this only requires precise relative measurements and therefore the absolute scale is usually not very precisely calibrated. The luminosity calibration requires several machine-side instruments to be pushed beyond their initial scope.

Enrico Bravin; for the CERN BE/BI Collaboration

2011-07-06T23:59:59.000Z

485

Capabilities of the WAND Instrument | ORNL Neutron Sciences  

NLE Websites -- All DOE Office Websites (Extended Search)

Capabilities of the WAND Instrument Capabilities of the WAND Instrument The HFIR HB-2C Wide Angle Neutron Diffractometer (WAND) is a dual purpose instrument that can be used as a fast coarse-resolution powder diffractometer or as a single crystal diffractometer to explore broad regions of reciprocal space. This instrument is most beneficial to the condensed matter, materials science, as well as the planetary sciences communities. Due to its versatility and easy access this instrument can be used for parametric studies using a variety of ancillary sample environments to provide a complete control of thermodynamic variables such as temperature, magnetic field, and pressure. Most of the recent demand for this instrument has been focused in studies of unconventional superconductors, low-dimensional magnets, multiferroics and geophysics.

486

INSTRUMENTATION FOR ENVIRONMENTAL MONITORING--Radiation--Vol3Pt1  

SciTech Connect

A comprehensive survey of instrumentation for environmental monitoring is being carried out by the Lawrence Berkeley Laboratory originally under a grant from the National Science Foundation and now by the Office of Health and Environmental Research of the Department of Energy. Instruments being investigated are those useful for measurements in Air Quality, Water Quality, Radiation, and Biomedicine related to environmental research and monitoring. Consideration is given to instruments and techniques presently in use and to those developed for other purposes but having possible applications to this work. The results of the survey are given as (a) descriptions of the physical and operating characteristics of available instruments, (b) critical comparisons among instrumentation methods, and (c) recommendations of promising methodology and development of new instrumentation. Information is also given regarding the pollutants to be monitored: their characteristics and forms, their sources and pathways, their effects on the ecosystem, and the means of controlling them through process and regulatory controls.

Authors, Various

1972-01-02T23:59:59.000Z

487

INSTRUMENTATION FLOW PLAN SYMBOLS AND RECOMMENDED DRAWINGS. A STANDARD SYSTEM FOR ORNL INSTRUMENTATION APPLICATION WORK  

SciTech Connect

A system of symbols and identifications for processinstrumentation equipment to promote a uniformity of practice is presented. The system is for the following uses: designation and identification of instruments on flow pInns; recording specifinations, listings, requisitions, and purchase orders; indication of items on piping diagrams and other construction drawings; identification tagging of equipment; and description in technical and trade literature. (J.S.R.)

Adams, R.K.; Davis, D.G.; Hyland, R.F.

1958-02-21T23:59:59.000Z

488

DOE Fundamentals Handbook: Instrumentation and Control, Volume 1  

Science Conference Proceedings (OSTI)

The Instrumentation and Control Fundamentals Handbook was developed to assist nuclear facility operating contractors provide operators, maintenance personnel, and the technical staff with the necessary fundamentals training to ensure a basic understanding of instrumentation and control systems. The handbook includes information on temperature, pressure, flow, and level detection systems; position indication systems; process control systems; and radiation detection principles. This information will provide personnel with an understanding of the basic operation of various types of DOE nuclear facility instrumentation and control systems.

Not Available

1992-06-01T23:59:59.000Z

489

DOE Fundamentals Handbook: Instrumentation and Control, Volume 2  

SciTech Connect

The Instrumentation and Control Fundamentals Handbook personnel, and the technical staff facility operating contractors provide operators, maintenance personnel, and the technical staff with the necessary fundamentals training to ensure a basic understanding of instrumentation and control systems. The handbook includes information on temperature, pressure, flow, and level detection systems; position indication systems; process control systems; and radiation detection principles. This information will provide personnel with an understanding of the basic operation of various types of DOE nuclear facility instrumentation and control systems.

Not Available

1992-06-01T23:59:59.000Z

490

On-Line Monitoring of Instrument Channel Performance  

Science Conference Proceedings (OSTI)

This topical report presents an alternate approach to instrument channel surveillance (i.e., monitoring and verifying instrument channel performance) that provides several additional benefits and is more cost-effective. This alternative is on-line monitoring, which is based on the assessed in-operation performance of an instrument channel. This report also provides technical information and discusses the licensing aspects of implementing an on-line monitoring program.

1998-11-25T23:59:59.000Z

491

Human factors aspects of advanced instrumentation in the nuclear industry  

SciTech Connect

An important consideration in regards to the use of advanced instrumentation in the nuclear industry is the interface between the instrumentation system and the human. A survey, oriented towards identifying the human factors aspects of digital instrumentation, was conducted at a number of United States (US) and Canadian nuclear vendors and utilities. Human factors issues, subsumed under the categories of computer-generated displays, controls, organizational support, training, and related topics were identified. 20 refs., 2 tabs.

Carter, R.J.

1989-01-01T23:59:59.000Z

492

Instrument - NG7 SANS - Small Angle Neutron Scattering  

Science Conference Proceedings (OSTI)

... Jointly developed and sponsored by the NCNR, the ExxonMobil Research and Engineering Co., and the University of Minnesota, the instrument ...

2012-09-17T23:59:59.000Z

493

Experimental investigations of lip motion in brass instrument playing.  

E-Print Network (OSTI)

??The precise nature of the motion of the lips of the musician is critically important to the sound of the brass wind instrument. The player… (more)

Stevenson, Samuel D. F.

2009-01-01T23:59:59.000Z

494

FLIP FLoating Instrument Platform (SIO Reference 62-24)  

E-Print Network (OSTI)

SAN DIEGO 52, CALIFORNIA FLIP FLoating Instrument Platformpressure prior to all flips. ( Pump running. ) 8. UnlockCheck-off Prior to each flip, the following list should be

Bronson, Earl D; Glosten, Larry R

1962-01-01T23:59:59.000Z

495

Specifications of the SNAP Instrument | ORNL Neutron Sciences  

NLE Websites -- All DOE Office Websites (Extended Search)

& Education Specifications of the SNAP Instrument Moderator Decoupled poisoned supercritical hydrogen Source to sample distance 15 m Sample to detector distance 50 cm Angular...

496

Overview of Trends in Nuclear Power Plant Sensors and Instrumentation  

NLE Websites -- All DOE Office Websites (Extended Search)

Trends in Nuclear Power Plant Sensors and Instrumentation SASAN BAKTIARI Nuclear Engineering Division Argonne National Laboratory Ph: (630) 252-8982 bakhtiati@anl.gov Abstract -...

497

JAERI instrumented spool piece performance in two-phase flow  

SciTech Connect

Instrumented spool pieces to be installed in horizontal piping on the Cylindrical Core Test Facility (CCTF) at the Japanese Atomic Energy Institute (JAERI) have been designed and tested. The instrumented spool pieces will provide measurements from which mass flow rates can be computed. The primary instruments included in the spool pieces are a full-flow turbine, a full-flow perforated drag plate, and a low energy three-beam photon densitometer. Secondary instruments are provided to measured absolute pressure, fluid temperature, and differential pressure across the full-flow perforated drag plate.

Colson, J.B.; Gilbert, J.V.

1979-01-01T23:59:59.000Z

498

CLEAN-Linking International Instruments to Support Low Emission...  

Open Energy Info (EERE)

CLEAN-Linking International Instruments to Support Low Emission Planning Webinar- TNAs, NAMAs, LEDS and Roadmaps Jump to: navigation, search Tool Summary Name: CLEAN-Linking...

499

MOISyT Instrumentation System and Recent Field Experience  

NLE Websites -- All DOE Office Websites (Extended Search)

support a wide range of sensors and instruments * Software functions evolving to include remote administration, data visualization, schedulers, error handling, sensorinstrument...

500

INTEGRATING INSTRUMENTATION DATA IN PROBABILISTIC PERFORMANCE PREDICTION OF FLEXIBLE PAVEMENTS.  

E-Print Network (OSTI)

??The goal of this research was to develop a methodology integrating instrumentation data with existing mechanistic-empirical performance models for flexible pavements. The methodology is further… (more)

Yin, Hao

2007-01-01T23:59:59.000Z