National Library of Energy BETA

Sample records for antiques pawn shop

  1. Montana State Antiquities Database | Open Energy Information

    Open Energy Info (EERE)

    Antiquities Database Jump to: navigation, search OpenEI Reference LibraryAdd to library Web Site: Montana State Antiquities Database Abstract Database contains cultural resource...

  2. TNRC 191 - Antiquities Code | Open Energy Information

    Open Energy Info (EERE)

    Code section for preservation of antiquities. Published NA Year Signed or Took Effect 1977 Legal Citation TNRC 191 (1977) DOI Not Provided Check for DOI availability: http:...

  3. UC 9-8-304 - Antiquities | Open Energy Information

    Open Energy Info (EERE)

    search OpenEI Reference LibraryAdd to library Legal Document- StatuteStatute: UC 9-8-304 - AntiquitiesLegal Abstract Provides for protecting antiquities discovered on...

  4. Shop Request - 88-Inch Cyclotron

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Shop Request Note: You must be logged in to your Berkeley Lab LDAP account to access the Shop Request Form. 88 Work Request Shop Request ‎(Responses)‎ Open Spreadsheet

  5. Texas Antiquities Code Chapter 191 | Open Energy Information

    Open Energy Info (EERE)

    This is the Antiquities Code in Texas. Published NA Year Signed or Took Effect 1977 Legal Citation 9 AC 191 DOI Not Provided Check for DOI availability: http:...

  6. MCA 22-3-430 - Montana Antiquities Avoidance and Mitigation ...

    Open Energy Info (EERE)

    MCA 22-3-430 - Montana Antiquities Avoidance and MitigationLegal Abstract Sets forth a principle of preferred avoidance of heritage properties or paleontological remains,...

  7. UC 9-8-307 - Antiquities Discovery Reporting Requirements | Open...

    Open Energy Info (EERE)

    UC 9-8-307 - Antiquities Discovery Reporting RequirementsLegal Abstract Sets forth reporting requirements for discovery of archaeological resources on nonfederal lands....

  8. MCA 22-3-421 - Montana Antiquities Definitions | Open Energy...

    Open Energy Info (EERE)

    search OpenEI Reference LibraryAdd to library Legal Document- StatuteStatute: MCA 22-3-421 - Montana Antiquities DefinitionsLegal Abstract This is the definitions section for...

  9. MCA 22-3-429 - Montana Antiquities Consultation, Notice, Appeal...

    Open Energy Info (EERE)

    search OpenEI Reference LibraryAdd to library Legal Document- StatuteStatute: MCA 22-3-429 - Montana Antiquities Consultation, Notice, AppealLegal Abstract Provides for...

  10. Development Shop | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Development Shop The Ames Laboratory operates a complete machine shop. Our shop consists of the modern equipment needed to fabricate almost any conceivable device required for research project. If you have a need or any questions about the fabrication of items to support your mission in research please contact us. Our machining equipment includes: Lathes CNC Bridgeport Mills Shears Press Brake (for bending) EDM (Electronic Discharge Machining) Grinders Saws We are capable of welding nearly any

  11. Solar Shop Australia | Open Energy Information

    Open Energy Info (EERE)

    Shop Australia Jump to: navigation, search Name: Solar Shop Australia Place: Adelaide, South Australia, Australia Zip: SA 5069 Sector: Renewable Energy Product: South...

  12. Process Waste Assessment - Paint Shop

    SciTech Connect (OSTI)

    Phillips, N.M.

    1993-06-01

    This Process Waste Assessment was conducted to evaluate hazardous wastes generated in the Paint Shop, Building 913, Room 130. Special attention is given to waste streams generated by the spray painting process because it requires a number of steps for preparing, priming, and painting an object. Also, the spray paint booth covers the largest area in R-130. The largest and most costly waste stream to dispose of is {open_quote}Paint Shop waste{close_quotes} -- a combination of paint cans, rags, sticks, filters, and paper containers. These items are compacted in 55-gallon drums and disposed of as solid hazardous waste. Recommendations are made for minimizing waste in the Paint Shop. Paint Shop personnel are very aware of the need to minimize hazardous wastes and are continuously looking for opportunities to do so.

  13. FormCampusMachineShopsLabs.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    for Advanced Microstructures & Devices 6980 Jefferson Highway Baton Rouge, Louisiana 70806 225-578-8887/ 225-578-6954 (Fax) Form for Campus Machine Shops and Labs Purchaser Name__________________________ Phone # _______________________________ PI / Supervisor Initials __________ Shop Name ____________________________________ Contact @ Shop Name________________________________ CAMD Account # to be Charged ________________________ Brief Description of Work to be Done: # of Items:

  14. Tips: Shopping for Appliances | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Appliances Tips: Shopping for Appliances What's the real cost? Every appliance has two price tags -- the purchase price and the operating cost. Consider both when buying a new...

  15. MCA 22-3-421 et seq. - Montana State Antiquities Act | Open Energy...

    Open Energy Info (EERE)

    search OpenEI Reference LibraryAdd to library Legal Document- StatuteStatute: MCA 22-3-421 et seq. - Montana State Antiquities ActLegal Abstract Provides for protecting...

  16. Klamath County Shops Space Heating Low Temperature Geothermal...

    Open Energy Info (EERE)

    Shops Space Heating Low Temperature Geothermal Facility Jump to: navigation, search Name Klamath County Shops Space Heating Low Temperature Geothermal Facility Facility Klamath...

  17. Tips: Shopping for Lighting | Department of Energy

    Energy Savers [EERE]

    Tips: Shopping for Lighting Tips: Shopping for Lighting With an array of lighting options, use the Lighting Facts label to determine the right lightbulb for you. | Photo courtesy of Michelle Vigen, <a href="http://www.flickr.com/photos/mncerts/6881821827/">Clean Energy Resource Teams</a>. With an array of lighting options, use the Lighting Facts label to determine the right lightbulb for you. | Photo courtesy of Michelle Vigen, Clean Energy Resource Teams. When shopping for

  18. Tips: Shopping for Lighting | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Shopping for Lighting Tips: Shopping for Lighting With an array of lighting options, use the Lighting Facts label to determine the right lightbulb for you. | Photo courtesy of Michelle Vigen, <a href="http://www.flickr.com/photos/mncerts/6881821827/">Clean Energy Resource Teams</a>. With an array of lighting options, use the Lighting Facts label to determine the right lightbulb for you. | Photo courtesy of Michelle Vigen, Clean Energy Resource Teams. When shopping for

  19. Tips: Shopping for Appliances | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Shopping for Appliances Tips: Shopping for Appliances What's the real cost? Every appliance has two price tags -- the purchase price and the operating cost. Consider both when buying a new appliance. What's the real cost? Every appliance has two price tags -- the purchase price and the operating cost. Consider both when buying a new appliance. When you're shopping for appliances, think of two price tags. The first one covers the purchase price -- think of it as a down payment. The second price

  20. Property:Building/FloorAreaShops | Open Energy Information

    Open Energy Info (EERE)

    Property Edit with form History Property:BuildingFloorAreaShops Jump to: navigation, search This is a property of type Number. Floor area for Shops Pages using the property...

  1. Energy Savers: Your One Stop Shop for Energy Efficiency Upgrades...

    Office of Environmental Management (EM)

    Your One Stop Shop for Energy Efficiency Upgrades Energy Savers: Your One Stop Shop for Energy Efficiency Upgrades This is a presentation from Energy Impact Illinois posted on the...

  2. Savannah River Site - Central Shops GW OU | Department of Energy

    Office of Environmental Management (EM)

    Central Shops GW OU Savannah River Site - Central Shops GW OU January 1, 2013 - 12:00pm Addthis US Department of Energy Groundwater Database Groundwater Master Report InstallationName, State: Savannah River Site, SC Responsible DOE Office: Savannah River Site Plume Name: Central Shops GW OU Remediation Contractor: Savannah River Nuclear Solutions, LLC PBS Number: 30 Report Last Updated: 2013 Contaminants Halogenated VOCs/SVOCs Present?: Yes VOC Name Concentration (ppb) Regulatory Driver Cleanup

  3. CRAD, Machine Shop Safe Operations Assessment Plan | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Machine Shop Safe Operations Assessment Plan CRAD, Machine Shop Safe Operations Assessment Plan Performance Objective: The purpose of this assessment is to verify that machine shop operators are provided a safe and healthful workplace which will reduce or prevent injuries, illnesses, and accidental losses. Criteria: A worker protection program shall be implemented that provides a place of employment free from recognized hazards that are causing or likely to cause death or serious physical harm.

  4. Energy Savers: Your One Stop Shop for Energy Efficiency Upgrades |

    Office of Environmental Management (EM)

    Department of Energy Your One Stop Shop for Energy Efficiency Upgrades Energy Savers: Your One Stop Shop for Energy Efficiency Upgrades This is a presentation from Energy Impact Illinois posted on the website of the U.S. Department of Energy's Better Buildings Neighborhood Program. PDF icon Energy Savers from CNT Energy More Documents & Publications Energy Savers: A one-stop energy efficiency shop for multifamily building owners Energy Savers: Fireplaces Energy Impact Illinois:

  5. January 2014 Cybersecurity Awareness Campaign - Secure Online Shopping |

    Office of Environmental Management (EM)

    Department of Energy 4 Cybersecurity Awareness Campaign - Secure Online Shopping January 2014 Cybersecurity Awareness Campaign - Secure Online Shopping The January 2014 Cybersecurity Awareness Campaign featured issues surrounding secure online shopping. For more information on privacy issues, contact Jerry Hanley at Jerry.Hanley@hq.doe.gov. For information on Supply Chain Risk Management, contact Sue Farrand at Susan.Farrand@hq.doe.gov. PDF icon Cybersecurity Front Burner Issue 15 PDF icon

  6. ProteinShop: A Tool for Interactive Protein

    Office of Scientific and Technical Information (OSTI)

    ... and discuss future research. 2. Methodology ProteinShop can be used in two phases of the prediction process: the protein structure creation phase and the optimization phase. ...

  7. Tips: Shopping for Lighting | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    With an array of lighting options, use the Lighting Facts label to determine the right lightbulb for you. | Photo courtesy of Michelle Vigen, <a href="http://www.flickr.com/photos/mncerts/6881821827/">Clean Energy Resource Teams</a>. With an array of lighting options, use the Lighting Facts label to determine the right lightbulb for you. | Photo courtesy of Michelle Vigen, Clean Energy Resource Teams. When shopping for lighting, you can now use the Lighting Facts label and

  8. Waste audit study: Automotive paint shops

    SciTech Connect (OSTI)

    Not Available

    1987-01-01

    This report presents the results of a waste-audit study of automotive paint shops. The study focuses on the types and quantities of wastes generated, treatment and disposal alternatives, and the potential for reducing the amount and/or toxicity of waste generated. The analysis of solvent waste minimization focused primarily on in-plant modifications (e.g., source reduction) to reduce the generation of solvent waste. Strict inventory control is the most-readily implementable approach. While in-house recycling is viable, it is usually only cost-effective for larger firms. Specific recommendations for waste reduction were made.

  9. From Shop Floor to Top Floor: Best Business Practices in Energy...

    Open Energy Info (EERE)

    Shop Floor to Top Floor: Best Business Practices in Energy Efficiency Jump to: navigation, search Tool Summary LAUNCH TOOL Name: From Shop Floor to Top Floor: Best Business...

  10. Argonne/EPA system captures mercury from air in gold shops |...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Typical gold shop hood used to purify gold by superheating the goldmercury amalgam until the mercury vaporizes. The vaporized mercury is directed outside the shop into the open...

  11. Amber Plug-In for Protein Shop

    Energy Science and Technology Software Center (OSTI)

    2004-05-10

    The Amber Plug-in for ProteinShop has two main components: an AmberEngine library to compute the protein energy models, and a module to solve the energy minimization problem using an optimization algorithm in the OPTI-+ library. Together, these components allow the visualization of the protein folding process in ProteinShop. AmberEngine is a object-oriented library to compute molecular energies based on the Amber model. The main class is called ProteinEnergy. Its main interface methods are (1) "init"more » to initialize internal variables needed to compute the energy. (2) "eval" to evaluate the total energy given a vector of coordinates. Additional methods allow the user to evaluate the individual components of the energy model (bond, angle, dihedral, non-bonded-1-4, and non-bonded energies) and to obtain the energy of each individual atom. The Amber Engine library source code includes examples and test routines that illustrate the use of the library in stand alone programs. The energy minimization module uses the AmberEngine library and the nonlinear optimization library OPT++. OPT++ is open source software available under the GNU Lesser General Public License. The minimization module currently makes use of the LBFGS optimization algorithm in OPT++ to perform the energy minimization. Future releases may give the user a choice of other algorithms available in OPT++.« less

  12. Post-Holiday Holiday Shopping | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Post-Holiday Holiday Shopping Post-Holiday Holiday Shopping January 10, 2012 - 4:31pm Addthis Elizabeth Spencer Communicator, National Renewable Energy Laboratory Ah, January. It's still cold and it's still dark all the time, but now all the cheerful Christmas lights have come down so there's nothing to break up the monotony. What's there to do? Well, while it's a little late now, you might want to go do some post-holiday holiday shopping. Yes, I know. That sounds insane. Everyone is thoroughly

  13. Pigments with or without organic binder? A survey of wall painting techniques during Antiquity

    SciTech Connect (OSTI)

    Walter, P.

    1996-01-01

    The identification of ancient artistic techniques is based on laboratory studies and, for historical cases, also on literary sources. An analytical approach using the techniques of physical chemistry reveals the technical expertise of the artists, right at the dawn of art. In the case of prehistoric parietal art, we show that the artists prepared their pigments with different ground and mixed minerals. They applied their material onto the wall and the particles remained embedded in the superficial calcite layer. Later, the prehistoric people prepared a real paint with the proper pigment, an extender and an organic binder to fix the paint on the wall. During Antiquity, new techniques appear. The paint is applied to the natural or artificial wall and is executed, either directly or on a previously applied plaster. The aim of this paper is to describe the evolution of the techniques. The underlying chemistry provides some interesting clues on the technical choices. {copyright} {ital 1996 American Institute of Physics.}

  14. How Will You Shop for Your Next Vehicle? | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Shop for Your Next Vehicle? How Will You Shop for Your Next Vehicle? July 28, 2011 - 11:41am Addthis On Monday, Shannon talked about how she's been using the online tools from the...

  15. New Lighting Facts Label: Takes the Guess Work Out of Shopping...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    New Lighting Facts Label: Takes the Guess Work Out of Shopping for Light Bulbs New Lighting Facts Label: Takes the Guess Work Out of Shopping for Light Bulbs January 25, 2012 - ...

  16. VEE-0084- In the Matter of Gasn Shop, Inc.

    Broader source: Energy.gov [DOE]

    On March 26, 2002, Gasn Shop, Inc. (Gasn Shop) of Lincoln, Nebraska filed an Application forException with the Office of Hearings and Appeals (OHA) of the Department of Energy (DOE). In its...

  17. Energy Savers: A one-stop energy efficiency shop for multifamily...

    Office of Environmental Management (EM)

    A one-stop energy efficiency shop for multifamily building owners Energy Savers: A one-stop energy efficiency shop for multifamily building owners This is a document from Energy...

  18. Holiday Shopping and Electric Vehicles | GE Global Research

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Infrastructure Research: Holiday Shopping & Electric Vehicles Click to email this to a friend (Opens in new window) Share on Facebook (Opens in new window) Click to share (Opens in new window) Click to share on LinkedIn (Opens in new window) Click to share on Tumblr (Opens in new window) Infrastructure Research: Holiday Shopping & Electric Vehicles Jigar Shah 2014.12.03 With Thanksgiving behind us in the U.S., that can only mean one thing for all the bargain-hunters out there: deals

  19. Green your Back to School Shopping List! | Department of Energy

    Office of Environmental Management (EM)

    Green your Back to School Shopping List! Green your Back to School Shopping List! August 23, 2013 - 10:06am Addthis Save energy and money while buying school supplies this year. | Photo courtesy of ©iStockphoto/Ls9907 Save energy and money while buying school supplies this year. | Photo courtesy of ©iStockphoto/Ls9907 Agatha Wein Communications Specialist, State Energy Program How can I participate? You can save energy and money this fall by simply reducing, reusing, and recycling school

  20. ProteinShop: A tool for interactive protein manipulation and steering

    Office of Scientific and Technical Information (OSTI)

    (Journal Article) | SciTech Connect Journal Article: ProteinShop: A tool for interactive protein manipulation and steering Citation Details In-Document Search Title: ProteinShop: A tool for interactive protein manipulation and steering We describe ProteinShop, a new visualization tool that streamlines and simplifies the process of determining optimal protein folds. ProteinShop may be used at different stages of a protein structure prediction process. First, it can create protein

  1. ProteinShop: A tool for interactive protein manipulation and steering

    Office of Scientific and Technical Information (OSTI)

    (Journal Article) | SciTech Connect ProteinShop: A tool for interactive protein manipulation and steering Citation Details In-Document Search Title: ProteinShop: A tool for interactive protein manipulation and steering We describe ProteinShop, a new visualization tool that streamlines and simplifies the process of determining optimal protein folds. ProteinShop may be used at different stages of a protein structure prediction process. First, it can create protein configurations containing

  2. Energy Savers: A one-stop energy efficiency shop for multifamily building

    Office of Environmental Management (EM)

    owners | Department of Energy A one-stop energy efficiency shop for multifamily building owners Energy Savers: A one-stop energy efficiency shop for multifamily building owners This is a document from Energy Impact Illinois posted on the website of U.S. Department of Energy's Better Buildings Neighborhood Program. PDF icon Energy Savers program brochure More Documents & Publications Energy Savers: Your One Stop Shop for Energy Efficiency Upgrades Energy Savers: Fireplaces Saving Energy

  3. Lumens: The new way to shop for light

    Office of Environmental Management (EM)

    r a d i t i o n a l I n c a n d e s c e n t W a t t s L u m e n s ( B r i g h t n e s s ) LUMENS: THE NEW WAY TO SHOP FOR LIGHT Choose Your Next Light Bulb for the Brightness You Want. ~450 ~800 ~1100 ~1600 9 years 40 60 75 100 For the greatest savings, choose ENERGY STAR® light bulbs. 12/05/201

  4. TAN Hot Shop and Support Facility Utilization Study

    SciTech Connect (OSTI)

    Picker, B.A.

    2001-11-16

    Impacts to the U.S. Department of Energy (DOE) complex caused by early closure (prior to 2018) and Demolition and Dismantlement (D and D) of the Test Area North (TAN) hot shop and its support facilities are explored in this report. Various possible conditions, such as Standby, Safe Store and Lay-up, that the facility may be placed in prior to eventually being turned over to D and D are addressed. The requirements, impacts, and implications to the facility and to the DOE Complex are discussed for each condition presented in the report. Some details of the report reference the Idaho National Engineering and Environmental Laboratory (INEEL) Spent Nuclear Fuel Life Cycle Baseline Plan, the INEEL 2000 Infrastructure Long Range Plan, and other internal INEEL reports.

  5. TAN HOT SHOP AND SUPPORT FACILITY UTILIZATION STUDY

    SciTech Connect (OSTI)

    Phillips, Ken Crawforth

    2001-11-01

    Impacts to the U.S. Department of Energy (DOE) complex caused by early closure (prior to 2018) and Demolition and Dismantlement (D&D) of the Test Area North (TAN) hot shop and its support facilities are explored in this report. Various possible conditions, such as Standby, Safe Store and Lay-up, that the facility may be placed in prior to eventually being turned over to D&D are addressed. The requirements, impacts, and implications to the facility and to the DOE Complex are discussed for each condition presented in the report. Some details of the report reference the Idaho National Engineering and Environmental Laboratory (INEEL) Spent Nuclear Fuel Life Cycle Baseline Plan, the INEEL 2000 Infrastructure Long Range Plan, and other internal INEEL reports.

  6. Pollution prevention opportunity assessment for Facilities Maintenance Team (FMT) paint shop.

    SciTech Connect (OSTI)

    Klossner, Kristin Ann

    2003-05-01

    This Pollution Prevention Opportunity Assessment (PPOA) was conducted for Sandia National Laboratories/California Facilities Maintenance Team Paint Shop Operations in August and September 2002. The primary purpose of this PPOA is to provide recommendations to assist Paint Shop personnel in reducing the generation of waste and improving the efficiency of their processes. This report contains a summary of the information collected and analyses performed and recommends options for implementation. The Sandia National Laboratories Pollution Prevention staff will continue to work with the Paint Shop to implement the recommendations.

  7. From Shop Floor to Top Floor: Best Business Practices in Energy Efficiency

    Broader source: Energy.gov [DOE]

    This document is the presentation delivered on the Pew Center on Global Climate Change's report From Shop Floor to Top Floor: Best Business Practices in Energy Efficiency, which describes leading corporate energy efficiency programs.

  8. New Online Tool Creates One-Stop Shop for Federal Program Opportunities

    Office of Environmental Management (EM)

    That Support Tribal Energy Development | Department of Energy Online Tool Creates One-Stop Shop for Federal Program Opportunities That Support Tribal Energy Development New Online Tool Creates One-Stop Shop for Federal Program Opportunities That Support Tribal Energy Development December 3, 2014 - 9:03am Addthis Today the White House Council on Native American Affairs Energy Subgroup launched a new Federal Grant, Loan, and Technical Assistance Programs for Tribal Energy Development online

  9. RCRA Facility Investigation/Remedial Investigation Report with the Baseline Risk Assessment for the 716-A Motor Shops Seepage Basin

    SciTech Connect (OSTI)

    Palmer, E.

    1997-08-25

    This document describes the RCRA Facility Investigation/Remedial Investigation/Baseline Risk Assessment of the 716-A Motor Shops Seepage Basin.

  10. ISU offers one-stop shop for Wellbeing | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ISU offers one-stop shop for Wellbeing In partnership with University Human Resources, Ames Lab Human Resources is excited to communicate a new website being rolled out by ISU Wellbeing. The website is meant to be utilized by faculty and staff as a one-stop shop for programs, services, resources and tools related to well-being at Iowa State University. Even though this website has just launched, plans to improve it are already underway. Future enhancements include building an individual-specific

  11. Exposure Evaluation for Benzene, Lead and Noise in Vehicle and Equipment Repair Shops

    SciTech Connect (OSTI)

    Sweeney, Lynn C.

    2013-04-10

    An exposure assessment was performed at the equipment and vehicle maintenance repair shops operating at the U. S. Department of Energy Hanford site, in Richland, Washington. The maintenance shops repair and maintain vehicles and equipment used in support of the Hanford cleanup mission. There are three general mechanic shops and one auto body repair shop. The mechanics work on heavy equipment used in construction, cranes, commercial motor vehicles, passenger-type vehicles in addition to air compressors, generators, and farm equipment. Services include part fabrication, installation of equipment, repair and maintenance work in the engine compartment, and tire and brake services. Work performed at the auto body shop includes painting and surface preparation which involves applying body filler and sanding. 8-hour time-weighted-average samples were collected for benzene and noise exposure and task-based samples were collected for lead dust work activities involving painted metal surfaces. Benzene samples were obtained using 3M 3520 sampling badges and were analyzed for additional volatile organic compounds. These compounds were selected based on material safety data sheet information for the aerosol products used by the mechanics for each day of sampling. The compounds included acetone, ethyl ether, toluene, xylene, VM&P naphtha, methyl ethyl ketone, and trichloroethylene. Laboratory data for benzene, VM&P naphtha, methyl ethyl ketone and trichloroethylene were all below the reporting detection limit. Airborne concentrations for acetone, ethyl ether, toluene and xylene were all less than 10% of their occupational exposure limit. The task-based samples obtained for lead dusts were submitted for a metal scan analysis to identify other metals that might be present. Laboratory results for lead dusts were all below the reporting detection limit and airborne concentration for the other metals observed in the samples were less than 10% of the occupational exposure limit. Noise dosimetry sampling was performed on a random basis and was representative of the different work activities within the four shops. Twenty three percent of the noise samples exceeded the occupational exposure limit of 85 decibels for an 8-hour time-weightedaverage. Work activities where noise levels were higher included use of impact wrenches and grinding wheels.

  12. Central Shops Burning/Rubble Pit 631-6G Additonal Sampling and Monitor Well Installation Report

    SciTech Connect (OSTI)

    Palmer, E.

    1995-02-01

    The Central Shops Burning/Rubble Pit 631-6G was constructed in 1951 as an unlined earthen pit in surficial sediments for disposal and incineration of potentially hazardous substances, such as metals and organic solvents.

  13. Summary of the 1987 soil sampling effort at the Idaho National Engineering Laboratory Test Reactor Area Paint Shop Ditch

    SciTech Connect (OSTI)

    Wood, T.R.; Knight, J.L.; Hertzler, C.L.

    1989-08-01

    Sampling of the Test Reactor Area (TRA) Paint Shop Ditch at the Idaho National Engineering Laboratory was initiated in compliance with the Interim Agreement between the Department of Energy (DOE) and the Environmental Protection Agency (EPA). Sampling of the TRA Paint Shop Ditch was done as part of the Action Plan to achieve and maintain compliance with the Resource Conservation and Recovery Act (RCRA) and applicable regulations. It is the purpose of this document to provide a summary of the July 6, 1987 sampling activities that occurred in ditch west of Building TRA-662, which housed the TRA Paint Shop in 1987. This report will give a narrative description of the field activities, locations of collected samples, discuss the sampling procedures and the chemical analyses. Also included in the scope of this report is to bring together data and reports on the TRA Paint Shop Ditch for archival purposes. 6 refs., 10 figs., 8 tabs.

  14. Open | SpeedShop: An Open Source Infrastructure for Parallel Performance Analysis

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Schulz, Martin; Galarowicz, Jim; Maghrak, Don; Hachfeld, William; Montoya, David; Cranford, Scott

    2008-01-01

    Over the last decades a large number of performance tools has been developed to analyze and optimize high performance applications. Their acceptance by end users, however, has been slow: each tool alone is often limited in scope and comes with widely varying interfaces and workflow constraints, requiring different changes in the often complex build and execution infrastructure of the target application. We started the Open | SpeedShop project about 3 years ago to overcome these limitations and provide efficient, easy to apply, and integrated performance analysis for parallel systems. Open | SpeedShop has two different faces: it provides an interoperable tool set covering themore » most common analysis steps as well as a comprehensive plugin infrastructure for building new tools. In both cases, the tools can be deployed to large scale parallel applications using DPCL/Dyninst for distributed binary instrumentation. Further, all tools developed within or on top of Open | SpeedShop are accessible through multiple fully equivalent interfaces including an easy-to-use GUI as well as an interactive command line interface reducing the usage threshold for those tools.« less

  15. Window shopping

    SciTech Connect (OSTI)

    Best, D.

    1990-03-01

    The author addresses the energy efficiency of windows and describes changes and new products available in this consumer information article. Experiments currently being done by Lawrence Berkeley Laboratory (LBL), Bonneville Power Authority and the Washington State Energy Office show that some of these superwindows collect more energy from the sun than they let escape from inside the home. One type of window in current production is the low-E (low-emissivity) and the IGUs (insulated glass units). Low-E techniques include glazing of the glass with various materials including polyester and metallic coatings. Other measures include filling the airspace in double pane windows with argon, aerogel or by creating a vacuum in the airspace. Another factor the author considers is ultraviolet light protection.

  16. Implementation of a solvent management program to control paint shop volatile organic compounds

    SciTech Connect (OSTI)

    Floer, M.M.; Hicks, B.H.

    1997-12-31

    The majority of automobile assembly plant volatile organic compound (VOC) emissions are generated from painting operations. Typical paint operations generate more than 90 percent of the total plant emissions and, up to, 50 percent can be released by cleaning sources. Plant practices which contribute to the release of VOC emissions include the cleaning of paint lines and equipment, tanks, spray booths, floors and vehicles. Solvents continue to be the largest contributing source of VOC emissions in an automotive paint shop. To reduce overall VOC emissions, environmental regulations and guidelines were introduced under the Clean Air Act; Pollution Prevention and Waste Minimization programs, Control Techniques, and special air permit conditions. The introduction of these regulations and guidelines has driven industry toward continual refinement of their present cleaning methods while pursuing new techniques and technologies. Industry has also shown a proactive approach by introducing new waterborne and powder coating paint technologies to reduce overall emissions. As new paint technologies are developed and introduced, special attention must be given to the types of materials utilized for cleaning. The development and implementation of a solvent management program allows a facility to standardize a program to properly implement materials, equipment, technologies and work practices to reduce volatile organic compound emissions, meet strict cleaning requirements posed by new paint technologies and produce a vehicle which meets the high quality standards of the customer. This paper will assess the effectiveness of a solvent management program by examining pollution prevention initiatives and data from four different painting operations.

  17. A plan for implementation of innovative hazardous waste minimization techniques at an eastern US Naval Plating Shop

    SciTech Connect (OSTI)

    Walker, J.F. Jr.; Villiers-Fisher, J.F.; Brown, C.H. Jr.

    1987-01-01

    Oak Ridge National Laboratory (ORNL) was contracted by the Naval Energy and Environmental Support Activity (NEESA) to analyze the wastewater problems at a Naval Ordnance Station (NOS) plating shop in the eastern United States to recommend innovative wastewater treatment technologies for handling those problems and to implement the recommended treatment technology. Hexavalent chromium was identified as the major problem area at NOS. Water conservation measures were recommended which would reduce the volume of chromium-contaminated wastewater from approximately 300 L/min to approximately 20 L/min. A treatment scheme consisting of RO followed by evaporation of the RO concentrate steam was recommended. Paint-stripping operations at NOS potentially contaminate the wastewater with phenol, trichloroethane, and possibly other organics. However, the need for a treatment unit for removal of organics could not be established due to a lack of organic analytical data. A characterization study was therefore recommended for the NOS plating shop. If treatment for organics is necessary, the treatment unit might include two-stage filtration for removal of paint flakes or other solids, air stripping for removal of volatile organics, and carbon adsorption for removal of residual organics. 7 refs., 6 figs., 3 tabs.

  18. Project Final Report: Building a Community Infrastructure for Scalable On-Line Performance Analysis Tools around Open|SpeedShop

    SciTech Connect (OSTI)

    Galarowicz, James

    2014-01-06

    In this project we created a community tool infrastructure for program development tools targeting Petascale class machines and beyond. This includes tools for performance analysis, debugging, and correctness tools, as well as tuning and optimization frameworks. The developed infrastructure provides a comprehensive and extensible set of individual tool building components. We started with the basic elements necessary across all tools in such an infrastructure followed by a set of generic core modules that allow a comprehensive performance analysis at scale. Further, we developed a methodology and workflow that allows others to add or replace modules, to integrate parts into their own tools, or to customize existing solutions. In order to form the core modules, we built on the existing Open|SpeedShop infrastructure and decomposed it into individual modules that match the necessary tool components. At the same time, we addressed the challenges found in performance tools for petascale systems in each module. When assembled, this instantiation of community tool infrastructure provides an enhanced version of Open|SpeedShop, which, while completely different in its architecture, provides scalable performance analysis for petascale applications through a familiar interface. This project also built upon and enhances capabilities and reusability of project partner components as specified in the original project proposal. The overall project teams work over the project funding cycle was focused on several areas of research, which are described in the following sections. The reminder of this report also highlights related work as well as preliminary work that supported the project. In addition to the project partners funded by the Office of Science under this grant, the project team included several collaborators who contribute to the overall design of the envisioned tool infrastructure. In particular, the project team worked closely with the other two DOE NNSA laboratories Los Alamos and Sandia leveraging co-funding for Krell by ASCs Common Computing Environment (CCE) program as laid out in the original proposal. The ASC CCE co-funding, coordinated through LLNL, was for 50% of the total project funding, with the ASC CCE portion of the funding going entirely to Krell, while the ASCR funding itself was split between Krell and the funded partners. This report covers the entire project from both funding sources. Additionally, the team leveraged the expertise of software engineering researchers from Carnegie Mellon University, who specialize in software framework design, in order to achieve a broadly acceptable component framework. The Component Based Tool Framework (CBTF) software has been released to the community. Information related to the project and the released software can be found on the CBTF wiki page at: http://sourceforge.net/p/cbtf/wiki/Home

  19. Utah Antiquities Section | Open Energy Information

    Open Energy Info (EERE)

    sites and artifacts, educate the public about them, and assist professionals who are researching these cultural resources. References "Utah State History: Archaeology Website"...

  20. RCRA Facility Investigation/Remedial Investigation Report with Baseline Risk Assessment for the Central Shops Burning/Rubble Pit (631-6G), Volume 1 Final

    SciTech Connect (OSTI)

    1996-04-01

    The Burning/Rubble Pits at the Savannah River Site were usually shallow excavations approximately 3 to 4 meters in depth. Operations at the pits consisted of collecting waste on a continuous basis and burning on a monthly basis. The Central Shops Burning/Rubble Pit 631- 6G (BRP6G) was constructed in 1951 as an unlined earthen pit in surficial sediments for disposal of paper, lumber, cans and empty galvanized steel drums. The unit may have received other materials such as plastics, rubber, rags, cardboard, oil, degreasers, or drummed solvents. The BRP6G was operated from 1951 until 1955. After disposal activities ceased, the area was covered with soil. Hazardous substances, if present, may have migrated into the surrounding soil and/or groundwater. Because of this possibility, the United States Environmental Protection Agency (EPA) has designated the BRP6G as a Solid Waste Management Unit (SWMU) subject to the Resource Conservation Recovery Act/Comprehensive Environmental Response, Compensation and Liability Act (RCRA/CERCLA) process.

  1. Revised Finding of No Significant Impact for Expansion and Operation of the Central Shops Borrow Pit at the Savannah River Site (10/29/03)

    SciTech Connect (OSTI)

    N /A

    2003-10-29

    The Department of Energy (DOE) prepared an environmental assessment (EA) (DOE/EA-1194) in 1997 for the expansion and operation of the existing Central Shops Borrow Pit (i.e., SRS Facility 632-G) at the Savannah River Site (SRS), located near Aiken, South Carolina. This EA was prepared in accordance with the National Environmental Policy Act (NEPA) of 1969, as amended; the requirements of the Council on Environmental Quality Regulations for Implementing NEPA (40 CFR 15400-1508); and the DOE Regulations for Implementing NEPA (10 CFR 1021). Based on the analyses in the EA, DOE determined that the action was not a major Federal action significantly affecting the quality of the human environment within the meaning of NEPA. Therefore, the preparation of an environmental impact statement (EIS) was not required, and DOE issued a Finding of No Significant Impact (FONSI) dated March 13, 1997. In an effort to provide the site with cost-effective future landfill capacity for construction and demolition (C&D) debris/structural fill, DOE is considering redefining the closure of the 632-G facility to encompass the permitted disposal of inert C&D debris into the excavation areas, which would then be closed as per regulatory requirements. Based on the existing infrastructure at the 632-G facility that would support a permitted Part III C&D Landfill, DOE has concluded that the environmental impacts of the proposed use of the excavated portions of this facility as an inert debris landfill is not a major Federal action significantly affecting the quality of the human environment within the meaning of NEPA. Therefore, the preparation of an EIS is not required, and DOE is issuing this revised FONSI.

  2. Equipment | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Machine Shop

  3. Shopping for outage management systems

    SciTech Connect (OSTI)

    Chou, Y.C.; Konneker, L.K.; Watkins, T.R.

    1995-12-31

    Customer service is becoming increasingly important to electric utilities. Outage management is an important part of customer service. Good outage management means quickly responding to outages and keeping customers informed about outages. Each outage equals lost customer satisfaction and lost revenue. Outage management is increasingly important because of new competition among utilities for customers, pressure from regulators, and internal pressure to cut costs. The market has several existing software products for outage management. How does a utility judge whether these products satisfy their specific needs? Technology is changing rapidly to support outage management. Which technology is proven and cost-effective? The purpose of this paper is to outline the procedure for evaluating outage management systems, and to discuss the key features to look for. It also gives our opinion of the features that represent state of the art. This paper will not discuss specific products or list vendors names.

  4. Weatherization Assistance Available at Florida Pie Shop

    Broader source: Energy.gov [DOE]

    Pie in the Sky, a seemingly simple store that offers customers fresh-baked desserts, is providing a second treat: weatherization.

  5. Waste minimization in an autobody repair shop

    SciTech Connect (OSTI)

    Baria, D.N.; Dorland, D.; Bergeron, J.T.

    1994-12-31

    This work was done to document the waste minimization incorporated in a new autobody repair facility in Hermantown, Minnesota. Humes Collision Center incorporated new waste reduction techniques when it expanded its old facilities in 1992 and it was able to achieve the benefits of cost reduction and waste reduction. Humes Collision Center repairs an average of 500 cars annually and is a very small quantity generator (VSQG) of hazardous waste, as defined by the Minnesota Pollution Control Agency (MPCA). The hazardous waste consists of antifreeze, batteries, paint sludge, refrigerants, and used oil, while the nonhazardous waste consists of cardboard, glass, paint filters, plastic, sanding dust, scrap metal, and wastewater. The hazardous and nonhazardous waste output were decreased by 72%. In addition, there was a 63% reduction in the operating costs. The waste minimization includes antifreeze recovery and recycling, reduction in unused waste paint, reduction, recovery and recycle of waste lacquer thinner for cleaning spray guns and paint cups, elimination of used plastic car bags, recovery and recycle of refrigerant, reduction in waste sandpaper and elimination of sanding dust, and elimination of waste paint filters. The rate of return on the investment in waste minimization equipment is estimated from 37% per year for the distillation unit, 80% for vacuum sanding, 146% for computerized paint mixing, 211% for the refrigerant recycler, to 588% per year for the gun washer. The corresponding payback time varies from 3 years to 2 months.

  6. Technical Shop Machinist | Princeton Plasma Physics Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and lathes to fabricate complex parts from stainless steel, copper, aluminum, titanium, inconnel, etc from information on blueprints, dxf files, sketches and from verbal...

  7. JEA- ShopSmart Residential Rebate Program

    Broader source: Energy.gov [DOE]

    In order to receive rebates for window tinting, heat pumps, or central air conditioners, interested customers should contact a pre-qualified contractor to perform an assessment. The rebate from...

  8. Tips: Shopping for Appliances | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Appliances July 16, 2014 - 7:33pm Addthis What's the real cost? Every appliance has two price tags -- the purchase price and the operating cost. Consider both when buying a new...

  9. Suspended Solids Profiler Shop Test Report

    SciTech Connect (OSTI)

    STAEHR, T.W.

    2000-01-19

    The Suspended Solids Profiler (SSP) Instrument is planned to be installed in the AZ-101 tank to measure suspended solids concentrations during mixer pump testing. The SSP sensor uses a reflectance measurement principle to determine the suspended solids concentrations. The purpose of this test is to provide a documented means of verifying that the functional components of the SSP operate properly.

  10. 2715-WA_Carpenter's_Shop_Refurbishment.pdf

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

  11. Heavy Mobile Equipment Mechanic (1 Mechanic Shop)

    Broader source: Energy.gov [DOE]

    A successful candidate will perform preventative, predictive, and corrective maintenance on Bonneville Power Administration (BPA's) light and heavy mobile equipment in maintenance and filed...

  12. Building Green in Greensburg: Dillons Kwik Shop

    Broader source: Energy.gov [DOE]

    This poster highlights energy efficiency, renewable energy, and sustainable features of the high-performing Dillons Kwik Stop building in Greensburg, Kansas.

  13. Cosmologist's tour through the new particle zoo (candy shop)

    SciTech Connect (OSTI)

    Turner, M.S.

    1986-01-01

    Recent developments in elementary particle physics have led to a renaissance in cosmology, in general, and in the study of structure formation, in particular. Already, the study of the very early (t less than or equal to 10/sup -2/ sec) history of the Universe has provided valuable hints as to the 'initial data' for the structure formation problem - the nature and origin of the primeval density inhomogeneities, the quantity and composition of matter in the Universe today, and numerous candidates for the constituents of the ubiquitious dark matter. I review the multitude of WIMP candidates for the dark matter provided by modern particle physics theories, putting them into context by briefly discussing the theories which predict them. I also review their various birth sites and birth processes in the early Universe. At present the most promising candidates seem to be a 30 or so eV neutrino, a few GeV photino, or the 'invisible axion' (weighing in at about 10/sup -5/ eV), with a planck mass monopole, quark nuggets, and shadow matter as the leading 'dark' horse candidates. I also mention some very exotic possibilities - unstable WIMPs, cosmic strings, and even the possibility of a relic cosmological term.

  14. Standard-E hydrogen monitoring system shop acceptance test procedure

    SciTech Connect (OSTI)

    Schneider, T.C.

    1997-10-02

    The purpose of this report is to document that the Standard-E Hydrogen Monitoring Systems (SHMS-E), fabricated by Mid-Columbia Engineering (MCE) for installation on the Waste Tank Farms in the Hanford 200 Areas, are constructed as intended by the design. The ATP performance will verify proper system fabrication.

  15. Biomass Company Sets Up Shop in High School Lab

    Broader source: Energy.gov [DOE]

    Unlike most biotechnology students who have to go to a research facility to see scientists in action, those at Greeneville High just need to turn their heads.

  16. DockingShop: A Tool for Interactive Molecular Docking (Conference...

    Office of Scientific and Technical Information (OSTI)

    DOE Contract Number: DE-AC02-05CH11231; NIH:CHE-0205170 Resource Type: Conference Resource Relation: Conference: IEEE Visualization 2005 (submitted to),Minneapolis, MN, October ...

  17. Erosion Flume | Open Energy Information

    Open Energy Info (EERE)

    Real-Time Yes Test Services Test Services Yes On-Site fabrication capabilityequipment Machine shop, carpenter shop, welding shop, instrumentation and electronics shop Past...

  18. Kennedy Flume | Open Energy Information

    Open Energy Info (EERE)

    Real-Time Yes Test Services Test Services Yes On-Site fabrication capabilityequipment Machine shop, carpenter shop, welding shop, instrumentation and electronics shop Past...

  19. Environmental Flume | Open Energy Information

    Open Energy Info (EERE)

    Real-Time Yes Test Services Test Services Yes On-Site fabrication capabilityequipment Machine shop, carpenter shop, welding shop, instrumentation and electronics shop Past...

  20. University of Iowa Wave Basin | Open Energy Information

    Open Energy Info (EERE)

    Real-Time Yes Test Services Test Services Yes On-Site fabrication capabilityequipment Machine shop, carpenter shop, welding shop, instrumentation and electronics shop Past...

  1. Ice Towing Tank | Open Energy Information

    Open Energy Info (EERE)

    Real-Time Yes Test Services Test Services Yes On-Site fabrication capabilityequipment Machine shop, carpenter shop, welding shop, instrumentation and electronics shop Past...

  2. Small Towing Tank | Open Energy Information

    Open Energy Info (EERE)

    Real-Time Yes Test Services Test Services Yes On-Site fabrication capabilityequipment Machine shop, carpenter shop, welding shop, instrumentation and electronics shop Past...

  3. Energy Efficiency Can Be at the Top of Your Shopping List

    Broader source: Energy.gov [DOE]

    I hope your holidays are filled with cool ways to fine-tune your life that will get you closer to the cutting edge of energy efficiency.

  4. Farmer owned multi-use solar buildings for drying hay, grain, or heating shop

    SciTech Connect (OSTI)

    DeBusk, K.E.

    1983-06-01

    Identical multi-use solar buildings were built and tested on two farms in 1982. Actual (not simple) pay back periods are given for the two buildings for hay and for grain drying. Comparisons between solar and computed propane gas costs are reported.

  5. Energy Efficiency Can Be at the Top of Your Shopping List | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    list, too. Plug-in hybrid - Electric cars with some serious potential, the lithium ion battery-powered go-getters should be available next year or in 2011, including ones from...

  6. DOE/SC-ARM-09-023 Ordering ARM Data One-Stop Shopping: Getting...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    When data are ordered, the Data Archive will process and deliver the selected data to an ftp site for downloading. To access data gathered during field campaigns (also known as...

  7. Electricity rate effects of 150 MW shop assembled turbocharged boiler generating units

    SciTech Connect (OSTI)

    Drenker, S.; Fancher, R.

    1984-08-01

    Major upheavals in the environment in which electric utilities operate began in the 1960's. Modular construction, developed and perfected by process industry engineering firms, in conjuction with small turbocharged boiler power plants (currently under development), can respond to these forces by shortening construction time. Benefits from this approach, resulting from better matching of load growth and reducing planning horizon, can equal 15% to 60% of the capital cost of large pulverized coal plants.

  8. New Online Tool Creates One-Stop Shop for Federal Program Opportunitie...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    financial and technical assistance programs, workforce development, regulatory streamlining, federal procurement, and project support. Addthis Related Articles Energy...

  9. DockingShop: A Tool for Interactive Molecular Docking Ting-Cheng...

    Office of Scientific and Technical Information (OSTI)

    Genetics; I.3.6 Computer Graphics: Methodology and Techniques-Interaction Techniques; ... Institute for Quantitative Biomedical Research, Berkeley, California, tlu@lbl.gov, ...

  10. Shopping For Danger: E-commerce techniques applied to collaboration in cyber security

    SciTech Connect (OSTI)

    Bruce, Joseph R.; Fink, Glenn A.

    2012-05-24

    Collaboration among cyber security analysts is essential to a successful protection strategy on the Internet today, but it is uncommonly practiced or encouraged in operating environments. Barriers to productive collaboration often include data sensitivity, time and effort to communicate, institutional policy, and protection of domain knowledge. We propose an ambient collaboration framework, Vulcan, designed to remove the barriers of time and effort and mitigate the others. Vulcan automated data collection, collaborative filtering, and asynchronous dissemination, eliminating the effort implied by explicit collaboration among peers. We instrumented two analytic applications and performed a mock analysis session to build a dataset and test the output of the system.

  11. New Lighting Facts Label: Takes the Guess Work Out of Shopping for Light Bulbs

    Broader source: Energy.gov [DOE]

    If you're like me, it sometimes feels overwhelming standing at the store and staring at a big wall of light bulbs, trying to understand all the lighting choices.

  12. Jackson Square | Y-12 National Security Complex

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Jackson Square Jackson Square Construction of Jackson Square Shopping Center.

  13. PowerPoint Presentation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    * Machine shop * LH lab * Power systems and computer shop * Diagnostics setup lab * Welding shop 5 Year 513-514 2003 Some C-Mod Specific Instrumentation * 360 TF joint...

  14. Celilo shuts down historic equipment and ushers in a new era

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    member of the Celilo crew with 31 ("almost 32") years of service, loves to joke about his "antiques" - affectionately referring to both the valuable equipment and to...

  15. Montana 2012 Report on Selected Heritage Properties | Open Energy...

    Open Energy Info (EERE)

    and Conservation complies with the Montana State Antiquities Act. Author Patrick J. Rennie Organization Montana Department of Natural Resources and Conservation Published...

  16. Montana Cultural Records Webpage | Open Energy Information

    Open Energy Info (EERE)

    LibraryAdd to library Web Site: Montana Cultural Records Webpage Abstract Provides access to the Montana Antiquities Database and provides information about the structure and...

  17. 5

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    7.0 - SHOP CRANES January 4, 2016 Rev 1 Page 1 CHAPTER 7.0 TABLE OF CONTENTS 7.0 SHOP CRANES ................................................................................................................................... 3 7.1 SCOPE .............................................................................................................................................. 3 7.2 GENERAL REQUIREMENTS

  18. Front Burner- Issue 15

    Broader source: Energy.gov [DOE]

    The Cybersecurity Front Burner Issue No. 15 addresses the DOE eSCRM Program and Secure Online Shopping.

  19. Sandia National Laboratories: Products and Services

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Gages, Fixtures, Molds Power Sources & Batteries Manufacturing, Shop Overflow through the Manufacturing Processes & Services Department Energy, Security & International Procurement...

  20. Lumens Placard (Green) | Department of Energy

    Energy Savers [EERE]

    Green) Lumens Placard (Green) PDF icon Lumens: The new way to shop for light More Documents & Publications Lumens Placard (Black...

  1. Reduce Waste and Save Energy this Holiday Season

    Broader source: Energy.gov [DOE]

    Reduce waste and save energy this holiday season whether you're shopping, eating, partying, decorating, or wrapping.

  2. Comparing Appliance and Lighting Energy Costs Online Just Got Easier

    Broader source: Energy.gov [DOE]

    The new Energy Labeling Rule makes it easy to compare energy use and costs when shopping for appliances or lighting.

  3. COMMODITIES USED BY WIPP

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ? Architect & other Professional Designs ? Automotive Parts & Accessories, RepairMaintenance Items ? Automotive Shop Equipment & Supplies ? Badges, Emblems, & Lanyards ? Bags,...

  4. EcoCAR Challenge Profile: Virginia Tech

    Broader source: Energy.gov [DOE]

    Since childhood, Lynn Gantt has had a deep seeded passion for cars and the mechanics that drive them. The Virginia native spent his weekends rebuilding antique tractors with his dad to race at...

  5. CX-002020: Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    Energy Efficiency Retrofits for Anaconda's Antique Street LightsCX(s) Applied: B2.5, B5.1Date: 04/26/2010Location(s): Anaconda, MontanaOffice(s): Energy Efficiency and Renewable Energy

  6. Cedarville School District Retrofit of Heating and Cooling Systems...

    Open Energy Info (EERE)

    The campus is served by antiquated air conditioning units combined with natural gas, and with very poor EER estimated at 6+-. - Monitor for 3 years the performance of the...

  7. Microsoft Word - DOE-ID-INL-15-061.docx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    61 SECTION A. Project Title: Materials and Fuels Complex (MFC) Machine Shop Reconfiguration and Installation Project SECTION B. Project Description and Purpose: The Machine Shop at the Materials and Fuels Complex (MFC) building MFC-782 is undergoing an effort to better align its capabilities with current and future needs. To support this effort, the proposed action would reconfigure the machine shop to allow for better, more strategic work flow and to update machining capabilities via the

  8. Hanford Facility Beryllium Fact Sheet Building Number/Name:

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Responsible Contractor: Contact: 272W Machine Shop Building September 23, 1999 January 26, 2012 CHPRC Kristy Kimmerle, CIH PAST OPERATIONS Beryllium brought in facility: YES Form of beryllium: SOLID Period of beryllium operations (dates): Start: 1955 End: 1980s Location(s) in facility that contained beryllium materials: Machine shop, tool and die shop Description of beryllium activities: Fabrication of electrical connectors using 0.61% beryllium alloy using a machining process and subsequent

  9. Jefferson Lab recognizes its Outstanding Small Business Contractor for FY

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2003 | Jefferson Lab Sharon Harrah (center), owner of Triad Machine Shop located in Newport News, Va., receives the award plaque from JLab Director Christoph Leemann (right). Harrah is accompanied by her husband, Ed. Jefferson Lab recognizes its Outstanding Small Business Contractor for FY 2003 April 15, 2004 The Department of Energy's Jefferson Lab recognized a local, woman-owned machine shop recently as its Outstanding Small Business Contractor for fiscal year 2003. Triad Machine Shop was

  10. Small Business Saturday is November 29 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Small Business Saturday is November 29 Small Business Saturday is November 29 November 10, 2014 - 10:38am Addthis Small Business Saturday - November 29, 2014 Shop Small Businesses on November 29! Shop Small Businesses on November 29! November 29 is Small Business Saturday! Show your support for America's small businesses by shopping with them! Read more Saturday, November 29, 2014 is Small Business Saturday® - a day to celebrate and support small businesses and all they do for their

  11. Small Wind Guidebook/First, How Can I Make My Home More Energy...

    Open Energy Info (EERE)

    by 25% to 50%. Replacing 15 incandescent light bulbs with energy efficient bulbs can save approximately 50 per year. When shopping for appliances, look for the Energy Star...

  12. PNNL-20162

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    artillery revetments, the remains of a former maintenance shop, various concrete building slabs and walkways, building foundations, surface debris scatters (containing barbed wire,...

  13. bbergman | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    bbergman Ames Laboratory Profile Brian Bergman Facil Mechanic III Facilities Services Maintenance Shop Phone Number: 515-294-4346 Email Address: bbergman@ameslab.gov

  14. flanders | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    flanders Ames Laboratory Profile Duane Flanders Sheet Metal Mech Facilities Services Maintenance Shop Phone Number: 515-294-1746 Email Address: flanders@ameslab.gov

  15. RadiaBeam PPT template

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Machine shops (clean and regular) Assembly area Magnetic measurements lab Optics lab Hot test cell (up to 9 MeV) Clean room Chemical processing RF test...

  16. SSAP Annual_13may2013.indb

    National Nuclear Security Administration (NNSA)

    ... of three identical MMI instruments fabricated at the UNR Physics machine shop (middle). ... only once, so that measured signals are directly correlated with the fast electron flux. ...

  17. Energy Department's New Buildings Solution Center Shares Proven...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Now available online, the Solution Center-a one-stop shop for residential energy ... Users can find information regarding business models, program designs, marketing and ...

  18. Collaborative Military Vehicle Design | GE Global Research

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Research: Holiday Shopping & Electric Vehicles IMG0475 Innovation 247: We're Always Open primusenginefeaturedimage3 GE Innovation and Manufacturing in Europe ...

  19. Intranet | APS X-ray Science Division

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    IT Helpdesk Stockroom Catalog | Shopping Cart | Stockroom (Bldg. 401) 2-9082 Key Request Phone Request Argonne Internal Resources: 401 Grill Inside Argonne AMOS, GatePass,...

  20. Jefferson Lab recognizes its Outstanding Small Business Contractor...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Sharon Harrah (center), owner of Triad Machine Shop located in Newport News, Va., receives the award plaque from JLab Director Christoph Leemann (right). Harrah is accompanied by...

  1. Crivelli, Silvia; Kreylos, Oliver; Max, Nelson; Hamann, Bernd...

    Office of Scientific and Technical Information (OSTI)

    and steer a protein structure prediction process that may be running on a remote machine. ProteinShop was used to create initial configurations for a protein structure...

  2. Conte Small Flume | Open Energy Information

    Open Energy Info (EERE)

    carpentry shop with welding and machining capabilities Past Pertinent Test Experience Fish passage structures, screening, bridge pier scour, mixing pump Special Characteristics...

  3. Conte Large Flume | Open Energy Information

    Open Energy Info (EERE)

    carpentry shop with welding and machining capabilities Past Pertinent Test Experience Fish passage structures, screening, bridge pier scour, mixing pump Special Characteristics...

  4. Environment/Health/Safety (EHS)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Safety Minute Brief Introduction At Home Authorizations Laboratory Area Office Area Shop Area Reporting Ergonomics (general) Training Supervisor Responsibilities Site- Wide...

  5. U.S. Energy Information Administration | Annual Coal Report 2013

    U.S. Energy Information Administration (EIA) Indexed Site

    Includes all employees engaged in production, preparation, processing, development, maintenance, repair shop, or yard work at mining operations, including office workers. Excludes ...

  6. SAS Output

    U.S. Energy Information Administration (EIA) Indexed Site

    ... "Note: Includes all employees engaged in production, preparation, processing, development, maintenance, repair shop, or yard work at mining operations, including office workers. ...

  7. U.S. Energy Information Administration | Annual Coal Report 2013

    U.S. Energy Information Administration (EIA) Indexed Site

    ... Note: Includes all employees engaged in production, preparation, processing, development, maintenance, repair shop, or yard work at mining operations, including office workers. ...

  8. SAS Output

    U.S. Energy Information Administration (EIA) Indexed Site

    Includes all employees engaged in production, preparation, processing, development, maintenance, repair shop, or yard work at mining operations, including office workers. Excludes ...

  9. ORGANIZATIONAL CHART - CYCLOTRON INSTITUTE VII-11 DIRECTOR Yennello

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Schmidt Sherman Vickers Yendrey Machine Shop Supervisor Whiteley A. Clark Hanhart Raines Sr. Mechanical Engineer Olsen Designer II Molitor Anderson Barton Gallegos Richardson...

  10. Leavenworth Tree Lighting

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Join HERO for our annual Leavenworth Tree Lighting Ceremony & Shopping SATURDAY DECEMBER 12, 2015 Leavenworth Christmas Lighting Festival Visitors return year after year for some...

  11. RAPID/About/FAQ | Open Energy Information

    Open Energy Info (EERE)

    shop" for permitting and siting information for bulk transmission lines and renewable energy projects and includes information and resources such as permit applications,...

  12. Union Carbides 20 years in nuclear energy, part 2

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    large-scale precision machining of beryllium began. "1953 - Additional uranium casting facilities and another uranium machining shop were installed and completed by fall. A...

  13. A look back at Union Carbides FIRST 20 Years in Nuclear Energy...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    large-scale precision machining of beryllium began. "1953 - Additional uranium casting facilities and another uranium machining shop were installed and completed by fall. A...

  14. Space Institute Tunnel | Open Energy Information

    Open Energy Info (EERE)

    Yes Available Sensors Flow, Strain, Turbulence Data Generation Capability Real-Time No Test Services Test Services Yes On-Site fabrication capabilityequipment Machine shop and...

  15. gharper | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    gharper Ames Laboratory Profile Gregory Harper Sys Control Tech Facilities Services Maintenance Shop Phone Number: 515-294-1746 Email Address: gharper

  16. gillilan | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    gillilan Ames Laboratory Profile Steven Gilliland Sys Control Tech Facilities Services Maintenance Shop Phone Number: 515-294-3078 Email Address: gillilan

  17. mdotzler | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    mdotzler Ames Laboratory Profile Mike Dotzler Facil Mechanic III Facilities Services Maintenance Shop Phone Number: 515-294-4346 Email Address: mdotzler

  18. rberrett | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    rberrett Ames Laboratory Profile Ronald Berrett Sys Control Tech Facilities Services Maintenance Shop Phone Number: 515-294-1746 Email Address: rberrett

  19. rmalmq | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    rmalmq Ames Laboratory Profile Richard Malmquist Facil Mechanic III Facilities Services Maintenance Shop Phone Number: 515-294-1228 Email Address: rmalmq

  20. vdahl | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    vdahl Ames Laboratory Profile Vincent Dahl Mgr Facilities Mnt Facilities Services Maintenance Shop Phone Number: 515-294-1746 Email Address: vdahl

  1. NHC Large Flume | Open Energy Information

    Open Energy Info (EERE)

    V to 480 V, 3 phase On-Site fabrication capabilityequipment Full on-site carpentry, machine, and instrumentation shop Special Characteristics Hydro | Hydrodynamic Testing...

  2. Stennis Flume | Open Energy Information

    Open Energy Info (EERE)

    440220110 electric available On-Site fabrication capabilityequipment Small machine shop Special Characteristics Special Characteristics Yes Types of Co-located...

  3. Solfex Limited | Open Energy Information

    Open Energy Info (EERE)

    Jump to: navigation, search Name: Solfex Limited Address: Energy Arena Bannister Hall Works Off Shop Lane, Higher Walton Preston, Lancashire PR5 4DZ Place: Preston, United...

  4. Genome Science/Technologies

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    intra-genomic species heterogeneity and cell-to-cell interactions. He also loves volleyball, running, eating, sketching, shopping, and chillin' with a good movie. Cheryl...

  5. PROJECT MANGEMENT PLAN EXAMPLES Prepare Project Support Plans...

    Office of Environmental Management (EM)

    Machines located in the 717-D machine shop are already registered with Property Management and will be left in place. The 501-D diesel generator, spare refrigeration system ...

  6. CX-004126: Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    Machine Shop Equipment BurnCX(s) Applied: B1.12Date: 08/02/2010Location(s): New MexicoOffice(s): Sandia Site Office

  7. Products, Services: Not Procurable

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Furrier Physicians Amusements Gaming Produce ArtArtists Gift Shops Public Relations Art Galleries Glass Company Recreation Arts & Crafts GrocersGroceries Relocation Services...

  8. ALSNews Vol. 320

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Staff Machine Shop Operations Update News Links ringleaders Ring Leaders Shutdown this Summer ALS Project Manager Steve Rossi prepares users for the upcoming ALS shutdown. Want...

  9. BPA-2010-02071-FOIA Correspondence

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    rebuilding of lines and visualizations (Photo-shopped renderins) Mr. Mark Korsness. Civil Engineer. Transmission Project Manager. has been designated as the Authorizing...

  10. The Human Genome Project and other biological research efforts...

    Office of Scientific and Technical Information (OSTI)

    ... The group's recent paper, "Interactive Protein Manipulation," won the Best Application Award at the IEEE Visualization 2003 Conference. ProteinShop is now available for download ...

  11. WORKSHEET AND RESPONDENT QUESTIONS

    U.S. Energy Information Administration (EIA) Indexed Site

    ... For the 2003 CBECS, a new methodology was undertaken for interviewing strip shopping ... Non-profit or social services office Research and development office City hall or city ...

  12. Steep Gradient Flume | Open Energy Information

    Open Energy Info (EERE)

    instrumentation and electronics shop Past Pertinent Test Experience Mountain stream sediment transport, RFID tagged materials for sediment transport particle tracking Special...

  13. Blue-Dam

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Irrigation Systems Upgrades Specifications and Requirements section added clarifying language, "Brass impact sprinklers shall be rebuilt by an established repair shop and shall...

  14. Contacts

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Email Collections Wendy Strohmeyer Email Exhibits Omar Juveland Email Exhibit Shop Robert Naranjo Email Facilities Mike Martinez Email Science Education Gordon McDonough...

  15. Lumens Placard (Green) | Department of Energy

    Energy Savers [EERE]

    PDF icon Lumens: The new way to shop for light More Documents & Publications Lumens Placard (Black) Lighting Tip Card Lighting Tip Card

  16. Energy Savers: Fireplaces | Department of Energy

    Energy Savers [EERE]

    Savers: Fireplaces Energy Savers: Fireplaces Saving energy in fireplace use PDF icon Energy Savers: Fireplaces More Documents & Publications Energy Savers: Your One Stop Shop for Energy Efficiency Upgrades Energy Savers: A one-stop energy efficiency shop for multifamily building owners Fireplaces and Woodburning Stoves...May Raise Energy Costs

  17. 08-02-2010 NNSA-B-10-0295

    National Nuclear Security Administration (NNSA)

    10-0295 Sandia National Laboratories/New Mexico (SNL/NM) proposes to heat equipment formerly used in the SNL/NM explosives machine shop to burn off any traces of explosives residue that may still be present in trace amounts on the equipment. ✖ Sandia Site Office Machine Shop Equipment Burn Sandia National Laboratories - New Mexico

  18. Superhydrophobic Coating (2008 R&D 100 Winner)

    ScienceCinema (OSTI)

    Sandia

    2009-09-01

    A transparent coating that is not just impermeable to water, but actually makes it bounce off a surface to help prevent corrosion, protect electronic and antiquities, or provide a new, more efficient surface to collect pure water. 2008 R&D 100 winner (SAND2008-2215W)

  19. Superhydrophobic coating (2008 R&D 100 winner)

    ScienceCinema (OSTI)

    Jeff Brinker

    2010-01-08

    A transparent coating that is not just impermeable to water, but actually makes it bounce off a surface to help prevent corrosion, protect electronic and antiquities, or provide a new, more efficient surface to collect pure water. 2008 R&D 100 winner (SAND2008-2215W)

  20. LANL Vision

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    vehicles available for business use during the day. My brother-in-law is moving to a new apart- ment and my truck is in the shop. May I borrow a government truck from the...

  1. Give Me My Tax Credit! (Or, How I Almost Bought the Wrong Patio Door)

    Broader source: Energy.gov [DOE]

    Over the past few weeks, my husband and I have been shopping for a new patio door. We currently have a sliding glass door that we have always hated—full exposure to winds from the west and to open...

  2. Sandia Corporate Overview - Core group

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Subsystem EtherCAT up to 1000 Hz All DAQ signals available for control Running on NI ... rotor preparation 1,000 sq. ft. machine shop Outline What is the SWiFT Facility? ...

  3. This Appendix Current as of August...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    From NPL (9301996) 1100 BSUHR 1100 BSUHR, 1100 Area Bus Shop Underground Hoist Rams Storage Tank Deleted from NPL (9301996) 1100 HWSA 1100 HWSA, 1100 Area HWSA, 1100 Area...

  4. BONNEVILLE POWER ADMINISTRATION FOR IMMEDIATE RELEASE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    a shop vacuum set to blower mode. And viewers have responded to the enthusiasm and personality Kellie and Mike bring to performing the experiments. One YouTube viewer commented,...

  5. Energy Upgrade California

    Broader source: Energy.gov [DOE]

    The Energy Upgrade California program serves as a one-stop shop for California homeowners who want to improve the energy efficiency of their homes. The program connects homeowners with qualified...

  6. CX-005743: Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    Arizona Pima County Activity #13 Garage and ShopsCX(s) Applied: B5.1Date: 05/04/2011Location(s): Pima County, ArizonaOffice(s): Energy Efficiency and Renewable Energy, Golden Field Office

  7. Missouri School District Charges Up

    Broader source: Energy.gov [DOE]

    Missouri's Lee's Summit R-7 school district's distribution fleet was tired. Many of the vehicles had racked up more than 300,000 miles and made frequent trips to the shop to repair the 20 plus-year-old parts.

  8. Financing Energy-Efficient Homes | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Energy-Efficient Homes You can benefit from energy-efficient financing whether you're buying, selling, refinancing, or remodeling a home. If you're shopping for an energy-efficient...

  9. Acceptance Test Procedure for New Pumping and Instrumentation Control Skid L

    SciTech Connect (OSTI)

    KOCH, M.R.

    1999-10-11

    This Acceptance Test Procedure (ATP) provides for the inspection and testing of the new Pumping and Instrumentation Control (PIC) skid designed as ''L''. The ATP will be performed after the construction of the PIC skid in the shop.

  10. Strategic Financing Partnerships Help Jacksonville Program Take...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    In early 2011, the ShopSmart with JEA program in Jacksonville, Florida, began offering an energy efficiency interest rate buydown incentive in an effort to provide more enticing ...

  11. Students Earn Street Cred With the EcoCAR Challenge | Department...

    Broader source: Energy.gov (indexed) [DOE]

    Addthis EcoCAR Challenge Finish Line Event 1 of 8 1 of 8 EcoCAR Challenge Finish Line Event 1 of 8 US Department of Energy Secretary Steven Chu talks shop with members of the West...

  12. Clean Power Concepts | Open Energy Information

    Open Energy Info (EERE)

    Concepts Place: Vancouver, British Columbia, Canada Zip: V6B 1G1 Sector: Hydro, Solar, Wind energy Product: Clean Power aims to be a one-stop shop for retail, business-to-business...

  13. How Do You Reduce the Amount of Energy Used by Your Televisions...

    Broader source: Energy.gov (indexed) [DOE]

    changes to television labeling that will help you compare the energy use of different models when you're shopping. Many households have more than one television, and many of those...

  14. Last-Minute Energy Saving Stocking Stuffers | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    exciting than weatherstripping. Reusable Cup Cozy: If you know someone with a morning coffee-habit who frequents the local coffee shop on his or her way to work, consider giving...

  15. Energy 101: Lumens

    ScienceCinema (OSTI)

    None

    2013-05-29

    Description: In this edition of Energy 101, we talk about Lumens. When you're shopping for light bulbs, compare lumens to be sure you're getting the amount of light, or level of brightness, you want.

  16. CX-012586: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Fabrication/Maintenance Shop and Environmental Test Activities in the SRNL Nonproliferation Technologies Section Engineering Laboratories CX(s) Applied: B3.6Date: 41835 Location(s): South CarolinaOffices(s): Savannah River Operations Office

  17. Property:On-Site fabrication capability/equipment | Open Energy...

    Open Energy Info (EERE)

    this property. (previous 25) (next 25) A Alden Large Flume + Full on-site carpentry, machine, and instrumentation shops Alden Small Flume + Full on-site carpentry, machine, and...

  18. EA-1407: Proposed TA-16 Engineering Complex Refurbishment and Consolidation at Los Alamos National Laboratory, Los Alamos, New Mexico

    Broader source: Energy.gov [DOE]

    This EA evaluates the environmental impacts for the proposal to construct and operate offices, laboratories, and shops within the U.S. Department of Energy Los Alamos National Laboratory's (LANL)...

  19. The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Metals Development tdball@iastate.edu 515-294-4360 Brian Bergman Facil Mechanic III Maintenance Shop bbergman@ameslab.gov 515-294-4346 Ronald Berrett Sys Control Tech Maintenance...

  20. Plugged In: Understanding How and Where Plug-in Electric Vehicle...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... Area in Stevenson, WA, -- an area that is adjacent to the city's shops, restaurants, spas and art galleries. | Photo courtesy of Port of Skamania. EV Charging Stations Take Off ...

  1. Acceptance Test Procedure for New Pumping Instrumentation and Control Skid T

    SciTech Connect (OSTI)

    KOCH, M.R.

    2000-05-18

    This Acceptance Test Procedure (ATP) provides for the inspection and testing Of the new Pumping Instrumentation and Control (PIC) skid designed as ''T''. The ATP will be performed after the construction of the PIC skid in the fabrication shop.

  2. Acceptance Test Procedure for New Pumping Instrumentation and Control Skid V

    SciTech Connect (OSTI)

    KOCH, M.R.

    2000-05-18

    This Acceptance Test Procedure (ATP) provides for the inspection and testing of the new Pumping Instrumentation and Control. (PIC) skid designed as ''V''. The ATP will be performed after the construction of the PIC skid in the fabrication shop.

  3. Acceptance Test Procedure for New Pumping Instrumentation & Control Skid V

    SciTech Connect (OSTI)

    KOCH, M.R.

    2000-08-14

    This Acceptance Test Procedure (ATP) provides for the inspection and testing of the new Pumping Instrumentation and Control (PIC) skid designated as ''V''. The ATP will be performed after the construction of the PIC skid in the fabrication shop.

  4. Acceptance Test Procedure for New Pumping Instrumentation and Control Skid Q

    SciTech Connect (OSTI)

    KOCH, M.R.

    2000-03-27

    This Acceptance Test Procedure (ATP) provides for the inspection and testing of the new Pumping Instrumentation and Control (PIC) skid designed as ''Q''. The ATP will be performed after the construction of the PIC skid in the fabrication shop.

  5. Acceptance Test Procedure for New Pumping Instrumentation and Control Skid R

    SciTech Connect (OSTI)

    KOCH, M.R.

    2000-05-11

    This Acceptance Test Procedure (ATP) provides for the inspection and testing of the new Pumping Instrumentation and Control (PIC) skid designed as ''R''. The ATP will be performed after the construction of the PIC skid in the fabrication shop.

  6. Acceptance Test Procedure for New Pumping Instrumentation and Control Skid W

    SciTech Connect (OSTI)

    KOCH, M.R.

    2000-05-18

    This Acceptance Test Procedure (ATP) provides for the inspection and testing of the new Pumping Instrumentation and Control (PIC) skid designed as ''W''. The ATP will be performed after the construction of the PIC skid in the fabrication shop.

  7. Acceptance Test Procedure for New Pumping Instrumentation and Control Skid T

    SciTech Connect (OSTI)

    KOCH, M.R.

    2000-06-20

    This Acceptance Test Procedure (ATP) provides for the inspection and testing of the new Pumping Instrumentation and Control (PIC) skid designated as ''T''. The ATP will be performed after the construction of the PIC skid in the fabrication shop.

  8. Acceptance Test Procedure for New Pumping Instrumentation and Control Skid P

    SciTech Connect (OSTI)

    KOCH, M.R.

    2000-03-01

    This Acceptance Test Procedure (ATP) provides for the inspection and testing of the new Pumping Instrumentation and Control (PIC) skid designed as ''P''. The ATP will be performed after the construction of the PIC skid in the fabrication shop.

  9. Acceptance Test Procedure for New Pumping and Instrumentation Control Skid N

    SciTech Connect (OSTI)

    KOCH, M.R.

    1999-12-13

    This Acceptance Test Procedure (ATP) provides for the inspection and testing of the new Pumping and Instrumentation Control (PIC) skid designed as ''N''. The ATP will be performed after the construction of the PIC skid in the shop.

  10. Huntsville WISE Flyer

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Center What is WISE? The Huntsville WISE Gold Program is the one-stop-shop to stop ... Through Nexus Energy Center and its partners, the Huntsville WISE Gold Program provides up ...

  11. What Will You be Buying for an Energy Tax Credit?

    Broader source: Energy.gov [DOE]

    On Tuesday, Allison talked about her experience shopping for a patio door that met the requirements for a federal tax credit for energy efficiency. She found that it's important to make sure the...

  12. Agatha Wein | Department of Energy

    Energy Savers [EERE]

    State Energy Program Most Recent Green your Back to School Shopping List August 23 Save Energy With A Picnic July 18 Cozy Up to the Fire While Saving Money and Energy November 7

  13. Lumens Placard (Black) | Department of Energy

    Energy Savers [EERE]

    Lumens Placard (Black) Lumens Placard (Black) PDF icon Lumens: The new way to shop for light More Documents & Publications Lumens Placard (Green) Lighting Tip Card Lighting Tip Card

  14. Energy Efficient Computer Use | Department of Energy

    Office of Environmental Management (EM)

    feature may not work if you have a screen saver activated. In fact, modern LCD color monitors do not need screen savers at all. Learn More Tips: Shopping for Appliances...

  15. July 2014 Cybersecurity Awareness Campaign - Internet Safety | Department

    Office of Environmental Management (EM)

    of Energy July 2014 Cybersecurity Awareness Campaign - Internet Safety July 2014 Cybersecurity Awareness Campaign - Internet Safety More Documents & Publications January 2015 Cybersecurity Awareness Campaign - Phishing 2014 NCSAM Campaign January 2014 Cybersecurity Awareness Campaign - Secure Online Shopping

  16. Triangle Universities Nuclear Laboratory : 2011

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Location Phone (Area Code 919) TUNL MAIN OFFICE (BOX 90308) 660-2600660-2626 CONTROL ROOM 660-2602 TUNL LAB LEVEL 660-2603 660-2604 TUNL ELECTRONICS SHOP 660-2543 TUNL PAGING...

  17. Unique environmental remediation project on steep canyon successfully...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and soil from the parking lot of a busy shopping center. July 29, 2015 A telescoping crane hoists a spider excavator over Los Alamos Canyon before placing it on the canyon slope...

  18. Submitting Work | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Submitting Work Customers may directly contact the supervisor of the required service area to discuss the technical details of proposed projects. Iowa State University requestors need to bring an Intramural Purchase Order (IPO) with them from their departmental office to request services. After the technical details of the project are known, a cost estimate is prepared. Ames Laboratory operations work less than $1,000 is submitted directly to the shop using the Engineering Services Shop -

  19. ORGANIZATIONAL CHART - CYCLOTRON INSTITUTE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    SEE Line Proj. Manager H. Clark Horvat Hyman Utley Senior ME Derrig Graduate Students Research Associates Research Scientists Research Group Leaders Administration/ Accounting Wellmann Computer Systems Hagel Burch Senior Accelerator Physicist May Accelerator Physicists Kim H. Clark Operations Chief Abegglen Target Maker Utley Building Maint. Gallegos Kingsbury Mynar Piolet Shumbera Electrical Shop Cowden Eisenmann Malave Morgan O'Berski Peeler Yendrey Zajicek Student Workers Machine Shop

  20. Microsoft Word - DOE-ID-INL-15-063.docx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    3 SECTION A. Project Title: Test Reactor Area (TRA)-653 Machine Shop Reconfiguration and Equipment Installation Project SECTION B. Project Description and Purpose: In an effort to update capabilities and realign resources in support of future missions, the Advanced Test Reactor (ATR) machine shop in TRA-653 is being considered for a new Mazak VTC-800 machining center. The proposed scope of work includes removing several machining centers using various disposition paths including relocation in

  1. Energy Performance Ratings for Windows, Doors, and Skylights | Department

    Broader source: Energy.gov (indexed) [DOE]

    of Energy Before you shop for energy-efficient windows, doors, and skylights, learn about energy performance ratings. | Photo courtesy of iStockphoto.com/JamesBrey. Before you shop for energy-efficient windows, doors, and skylights, learn about energy performance ratings. | Photo courtesy of iStockphoto.com/JamesBrey. You can use the energy performance ratings of windows, doors, and skylights to tell you their potential for gaining and losing heat, as well as transmitting sunlight into your

  2. Reducing the Cost of Energy in Northwest Alaska

    Energy Savers [EERE]

    in Reducing the Cost of Northwest Alaska NANA Regional Corporation, Inc. Shopping Trip in Alaska Shopping list: Anchorage Northwest Alaska (average) $20 $60 Diapers Sugar Flour Milk Eggs Bread Keeping the Lights On * This increasing cost of living impacts every aspect of economic life. * Families are choosing between food and fuel. * Organizations make tough choices about maintaining essential services under cost pressure. Real Risks, Real People * There are real risks if we don't find long-

  3. Jacksonville, Florida | Department of Energy

    Energy Savers [EERE]

    Jacksonville, Florida Jacksonville, Florida ShopSmart with JEA Location: Jacksonville, Florida Seed Funding: $1.2 million-a portion of SEEA Southeast Consortium's $20 million funding Target Building Types: Residential (single-family) Website: https://jea.com/shopsmart/ Learn More: Read strategic financing story Read SEEA Snapshot Reports Watch program video JEA Helps Jacksonville Homes Shop Smart for Energy Efficiency Keeping a home comfortable in Florida's hot and humid climate is an inherent

  4. Energy Performance Ratings for Windows, Doors, and Skylights | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy Energy Performance Ratings for Windows, Doors, and Skylights Energy Performance Ratings for Windows, Doors, and Skylights Before you shop for energy-efficient windows, doors, and skylights, learn about energy performance ratings. | Photo courtesy of iStockphoto.com/JamesBrey. Before you shop for energy-efficient windows, doors, and skylights, learn about energy performance ratings. | Photo courtesy of iStockphoto.com/JamesBrey. You can use the energy performance ratings of windows,

  5. EcoCAR Challenge Profile: Virginia Tech

    SciTech Connect (OSTI)

    Gantt, Lynn

    2011-01-01

    Since childhood, Lynn Gantt has had a deep seeded passion for cars and the mechanics that drive them. The Virginia native spent his weekends rebuilding antique tractors with his dad to race at tractor pulls across the state, and now the Virginia Tech graduate student is the proud team co-leader of Virginia Tech's EcoCAR Challenge team -- the winners of the three-year long competition, as announced last night at an awards ceremony in Washington, D.C..

  6. Microsoft Word - DOE-ID-INL-15-028.docx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    8 SECTION A. Project Title: Advanced Test Reactor (ATR) Complex Street Lights Project SECTION B. Project Description: The ATR Complex street lighting has been taken out of service and needs to be replaced due to poor condition. An engineering inspection in October 2014 revealed numerous deficiencies with poles, guys, transformers, etc. The system was installed in 1965, is degraded and antiquated, and requires removal and replacement. The initial phase of the proposed action would remove the old

  7. EcoCAR Challenge Profile: Virginia Tech

    ScienceCinema (OSTI)

    Gantt, Lynn

    2013-05-29

    Since childhood, Lynn Gantt has had a deep seeded passion for cars and the mechanics that drive them. The Virginia native spent his weekends rebuilding antique tractors with his dad to race at tractor pulls across the state, and now the Virginia Tech graduate student is the proud team co-leader of Virginia Tech's EcoCAR Challenge team -- the winners of the three-year long competition, as announced last night at an awards ceremony in Washington, D.C..

  8. Cultural Preservation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Environmental Stewardship » Environmental Protection » Cultural Preservation Cultural Preservation The Laboratory strives to balance its continued growth with proactive and effective management of cultural resources. June 27, 2012 Los Alamos is rich with native antiquities Ceramic pottery sherds found at Tsirege Pueblo at TA-54. The pueblo, which dates to the Classic period of the Ancestral Pueblo cultural period, AD 1325-1600, consisted of hundreds of rooms. The Tsirege site also contains

  9. Lead exposure among small-scale battery recyclers, automobile radiator mechanics, and their children in Manila, the Philippines

    SciTech Connect (OSTI)

    Suplido, M.L.; Ong, C.N.

    2000-03-01

    Blood lead (PbB) and hemoglobin levels (Hb) were determined in 40 battery repair/recycling shop workers, 16 radiator repair shop workers, and 20 children living in the immediate vicinity of these shops. Unexposed residents with similar socio-economic status were also investigated. Mean PbB level was significantly higher for battery workers when compared to radiator workers and unexposed adults. Among battery workers, 94% had PbB levels above the WHO permissible exposure limit of 40 {micro}g/dL for males and 30 {micro}g/dL for females. There was no demarcation between workplace and living quarters; therefore, workers' families were similarly exposed to hazards. Children living in the immediate vicinity of battery shops also had significantly higher mean PbB levels compared to radiator shop children and unexposed children. For workers with PbB > 40 {micro}g/dL, 90% were anemic. Linear regression showed a correlation between Hb level and log{sub 10}PbB. There was no significant relationship between anemia and blood lead in children. The authors conclude that radiator repair activities appeared to increase the body burden of lead, although not up to a level significantly different from unexposed counterparts. Battery recycling/repair activities, however, significantly increased blood lead levels in workers and their children.

  10. EECBG Success Story: San Antonio Small Businesses "Seeing the Light" with

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Upgrades | Department of Energy San Antonio Small Businesses "Seeing the Light" with Energy Upgrades EECBG Success Story: San Antonio Small Businesses "Seeing the Light" with Energy Upgrades March 21, 2012 - 2:27pm Addthis Thanks to the City Lights Program, this design shop is saving an estimated 25,500 kilowatt-hours and $2,000 on electricity bills each year. | Photo Credit: City of San Antonio Thanks to the City Lights Program, this design shop is saving an

  11. Employee Spotlight: José Valdez

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    José Valdez José Valdez-Cherishing classic cars Find José Valdez in his garage, intensely focused on his hobby of refurbishing classic cars, preferably from the 1930s to early 1960s. June 24, 2014 José Valdez José Valdez "I used to help my dad in his body shop when I was a kid," Valdez explains, "and today my brother James is a car mechanic and my brother Bento runs a paint and body shop like our dad. Cars are in our blood." Most evenings, and certainly most weekends,

  12. Buying an Appliance this Holiday Season? ENERGY STAR Products will Save You

    Energy Savers [EERE]

    Money and Energy All Year! | Department of Energy Buying an Appliance this Holiday Season? ENERGY STAR Products will Save You Money and Energy All Year! Buying an Appliance this Holiday Season? ENERGY STAR Products will Save You Money and Energy All Year! December 12, 2012 - 11:40am Addthis When shopping for appliances or electronics for the holidays, look for the ENERGY STAR® and EnergyGuide labels. | Photo by Dennis Schroeder, NREL 22090. When shopping for appliances or electronics for

  13. Buying the Perfect Energy-Efficient Light Bulb in 5 Easy Steps | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy Buying the Perfect Energy-Efficient Light Bulb in 5 Easy Steps Buying the Perfect Energy-Efficient Light Bulb in 5 Easy Steps September 11, 2014 - 2:00pm Addthis Shopping for energy-efficient light bulbs just got easier! | Photo courtesy of iStockphotography.com/Thomas_EyeDesign Shopping for energy-efficient light bulbs just got easier! | Photo courtesy of iStockphotography.com/Thomas_EyeDesign Paige Terlip Paige Terlip Former Communicator, National Renewable Energy Laboratory How

  14. Lumens and the Lighting Facts Label | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Lumens and the Lighting Facts Label Lumens and the Lighting Facts Label Energy 101 Lumens: The new way to shop for light lighting_sub.jpg When you're shopping for lightbulbs, compare lumens to be sure you're getting the amount of light, or level of brightness, you want. The Lighting Facts Label will help. This new label will make it easy to compare bulb brightness, color, life, and estimated operating cost for the year. Buy Lumens, Not Watts We typically buy things based on how much of it we

  15. DOE - Office of Legacy Management -- Oxford OH Site - OH 22

    Office of Legacy Management (LM)

    Oxford OH Site - OH 22 FUSRAP Considered Sites Oxford, OH Alternate Name(s): Alba Craft Shop Alba Craft Laboratory Albaugh dba Alba Craft Shop OH.22-3 OH.22-4 Location: 10-14 West Rose Avenue, Oxford, Ohio OH.22-7 Historical Operations: Performed metal fabrication under subcontract with AEC prime contract to National Lead Company of Ohio on uranium metal. Includes VPs. OH.22-5 OH.22-6 OH.22-8 Eligibility Determination: Eligible OH.22-1 OH.22-2 Radiological Survey(s): Assessment Survey,

  16. Energy 101: Lumens | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Lumens Energy 101: Lumens Addthis Description In this edition of Energy 101, we talk about Lumens. When you're shopping for light bulbs, compare lumens to be sure you're getting the amount of light, or level of brightness, you want. Text Version Below is the text version for the Energy 101: Lumens video: The video opens with "Energy 101: Lumens: The new way to shop for light." This is followed by various shots of a store aisle featuring a variety of light bulbs, including close-ups of

  17. ITP LEADER Case Study: Flambeau River Papers Makes a Comeback With a Revised Energy Strategy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Papers Makes a Comeback With a Revised Energy Strategy Burdened by increasing operational costs, a century-old paper company in Wisconsin changes the way it used energy to turn around its business from a complete shutdown in 2006 to thriving paper production today. The closure of the Flambeau River Papers in 2006 was not surprising. The mill's enormous dependence on fossil fuel and its use of antiquated machinery had crippled the company in the face of rising energy costs. A fresh approach to

  18. Inquiring Minds - Questions About Physics

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Particle detectors Capturing the tracks of particles Software Programming in Particle Detectors " Is it possible to use software programing in particle detectors to develop a program that can interpert data of passive radar? " Home made particle detector "Would it be possible for me to build a small particle detector at home? I would like to observe some of the cosmic ray particles that hit earth." Antique Geiger Counter "I just purchased a CDV-700 Geiger counter from an

  19. Inquiring Minds - Questions About Physics

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Geiger Counter You wrote: I just purchased a CDV-700 Geiger counter from an antique store. It even came with the manual! The manual states that the test spot on the side of the unit (behind a sticker) contains a piece of radium d-e. It also states that it's half life is about 22 years. I have searched all over the Internet and cannot find any info on radium d-e. I am an Electrical Engineer not a Physicist. Any help is greatly appreciated. Thanks...Stephen Stephen, I had to do a bit of research

  20. Methods to Improve the Lower Limit of Detection for Tritium in the Air and on Surfaces

    Office of Environmental Management (EM)

    Group LANL Nov. 3 - 5, 2015 Methods to Improve the Lower Limit of Detection for Tritium in the Air and on Surfaces James T. (Tom) Voss, LANL LA-UR-15-28465 Present methods for the detection of tritium are adequate for most applications. However, the technology is becoming antiquated and in need of improvement, especially to address methods to achieve a lower limit of detection for Tritium in the air and on surfaces. The present methods to detect tritium in air are with the use of ion chamber

  1. Beardmore Building

    High Performance Buildings Database

    Priest River, ID Originally built in 1922 by Charles Beardmore, the building housed offices, mercantile shops, a ballroom and a theater. After decades of neglect under outside ownership, Brian Runberg, an architect and great-grandson of Charles Beardmore, purchased the building in 2006 and began an extensive whole building historic restoration.

  2. High Impact Technology Hub

    Broader source: Energy.gov [DOE]

    The High Impact Technology Hub is a one stop shop for information associated with technology demonstrations in occupied, operational buildings. Resources posted to Hub should accelerate the selection and evaluation of technology demonstration projects and enable transparency into DOEs market stimulation and tech to market activities.

  3. Puerto Rico Farmers Market Cooler, Saving Money

    Broader source: Energy.gov [DOE]

    Buying fruits and vegetables at the Las Piedras farmers market is now more comfortable for the thousands of Puerto Ricans who shop there regularly. And, the reason for that comfort — revamped air conditioning — is costing the city less in energy costs than before.

  4. 31 Tannery Road- Ferreira Construction Headquarters

    High Performance Buildings Database

    Branchburg, NJ The 31 Tannery project, located in Branchburg, New Jersey, is the corporate headquarters for Ferreira Construction and Ferreira Group. The facility is 42,000 square feet and serves as office space, shop, and living lab. This state-of-the-art facility raises the bar for a commercial high-performance building, with an eye towards energy independence.

  5. Contamination Control Techniques

    SciTech Connect (OSTI)

    EBY, J.L.

    2000-05-16

    Welcome to a workshop on contamination Control techniques. This work shop is designed for about two hours. Attendee participation is encouraged during the workshop. We will address different topics within contamination control techniques; present processes, products and equipment used here at Hanford and then open the floor to you, the attendees for your input on the topics.

  6. Building Technologies Office

    Broader source: Energy.gov [DOE]

    The Building Technologies Office (BTO) leads a vast network of research and industry partners to continually develop innovative, cost-effective energy saving solutionsbetter products, better new homes, better ways to improve older homes, and better buildings in which we work, shop, and lead our everyday lives.

  7. Link Alpha K

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    k A B C D E F G H I J K L M N O P Q R S T V W Y Z Filter by alpha... A B C D E F G H I J K L M N O P Q R S T U V W Y Z Key Plans: Building Floor Plans Key Request: Facilities Lock Shop

  8. Acceptance Test Procedure for New Pumping Instrumentation and Control Skid V

    SciTech Connect (OSTI)

    KOCH, M.R.

    2000-07-25

    This Acceptance Test Procedure (ATP) verifies proper construction per the design drawings and tests for proper functioning of the Pumping Instrumentation and Control (PIC) skid ''V''. The scope section lists the systems and functions to be checked. This ATP will be performed at the Site Fabrication Services (SFS) shop upon completion of the construction of the PIC skid.

  9. Acceptance Test Procedure for New Pumping and Instrumentation Control Skid M

    SciTech Connect (OSTI)

    KOCH, M.R.

    1999-11-09

    This Acceptance Test Procedure (ATP) verifies proper construction per the design drawings and tests for proper functioning of the Pumping and Instrumentation Control (PIC) skid ''M''. The Scope section lists the systems and functions to be checked. This ATP will be performed at the Site Fabrication Service's (SFS) shop upon completion of construction of the PIC skid.

  10. CX-001743: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Kittitas County, Washington Morris Sorensen Building and Upper County Shop - Energy Efficiency and Conservation Block Grant State of WashingtonCX(s) Applied: B1.3, B5.1Date: 04/22/2010Location(s): Kittitas County, WashingtonOffice(s): Energy Efficiency and Renewable Energy, Golden Field Office

  11. Replacement of alloy 800H superheated steam line

    SciTech Connect (OSTI)

    Barbier, R.A.; Bullock, J.W. [Sterling Chemicals, Texas City, TX (United States)

    1996-07-01

    Sterling Chemicals utilizes alloy 800HT (UNS N08811) piping for superheated steam service in its styrene dehydrogenation unit. An engineering project to replace these lines was recently completed. Material acquisition, shop fabrication, inspection requirements, and field erection will be highlighted in this paper.

  12. CX-003833: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    2715-WA Carpenters' Shop RefurbishmentCX(s) Applied: A9, B1.3, B1.15, B2.1Date: 08/03/2010Location(s): Richland, WashingtonOffice(s): Environmental Management, Office of River Protection-Richland Office

  13. Goodbye, Watts. Hello, Lumens. (High-Resolution EPS Billboard) | Department

    Energy Savers [EERE]

    of Energy EPS Billboard) Goodbye, Watts. Hello, Lumens. (High-Resolution EPS Billboard) High-resolution EPS of billboard reading, 'Goodbye Watts. Hello Lumens. The new way to shop for light. Energysaver.gov File DoE_Billboard_Goodbye_Watts.EPS More Documents & Publications Goodbye, Watts. Hello, Lumens. (High-Resolution JPG

  14. Goodbye, Watts. Hello, Lumens. (High-Resolution JPG Billboard) | Department

    Energy Savers [EERE]

    of Energy JPG Billboard) Goodbye, Watts. Hello, Lumens. (High-Resolution JPG Billboard) High-resolution JPG of billboard reading, 'Goodbye Watts. Hello Lumens. The new way to shop for light. Energysaver.gov Image icon DoE_Billboard_Goodbye_Watts.jpg More Documents & Publications Goodbye, Watts. Hello, Lumens. (High-Resolution EPS

  15. Lumens Education Poster - EPS | Department of Energy

    Energy Savers [EERE]

    Poster - EPS Lumens Education Poster - EPS High-resolution EPS version of poster reading, 'Goodbye Watts, Hello Lumens. The new way to shop for light. Energysaver.gov.' File lumens_education_poster.eps More Documents & Publications Lumens Education Poster Lumens Education Poster Goodbye, Watts. Hello, Lumens. (High-Resolution EPS Billboard)

  16. Lumens Education Poster | Department of Energy

    Energy Savers [EERE]

    High-resolution PDF version of poster reading, 'Goodbye Watts, Hello Lumens. The new way to shop for light. Energysaver.gov.' PDF icon lumens_education_poster.pdf More Documents & Publications Lumens Education Poster - EPS Lumens Education Poster Goodbye, Watts. Hello, Lumens. (High-Resolution EPS Billboard)

  17. Lumens Education Poster | Department of Energy

    Energy Savers [EERE]

    Image icon Low-resolution version of poster reading, 'Goodbye Watts, Hello Lumens. The new way to shop for light. Energysaver.gov.' More Documents & Publications Goodbye, Watts. Hello, Lumens. (Low-Resolution Billboard) Lumens Education Poster Lumens Education Poster - EPS

  18. Chris Stewart | Department of Energy

    Office of Environmental Management (EM)

    Chris Stewart Chris Stewart Chris Stewart - Senior Communicator at DOE's National Renewable Energy Laboratory Most Recent Energy Savings Tips on the Go: Check Out the New Energy Savers Mobile Site March 16 New Lighting Facts Label: Takes the Guess Work Out of Shopping for Light Bulbs January 25 Top 10 Most Popular Energy Savers Web Pages of 2011 December 27

  19. Energy Department Announces $9 Million to Improve Energy Efficiency of Hotels, Hospitals, Offices and other Commercial Buildings

    Broader source: Energy.gov [DOE]

    As part of the Obama Administration’s effort to double energy productivity by 2030 and reduce carbon emissions in commercial buildings, the Energy Department today announced $9 million to encourage investments in energy-saving technologies that can be tested and deployed in offices, shops, restaurants, hospitals, hotels and other types of commercial buildings.

  20. Closure Report for Corrective Action Unit 563: Septic Systems, Nevada Test Site, Nevada

    SciTech Connect (OSTI)

    NSTec Environmental Restoration

    2010-02-28

    Corrective Action Unit (CAU) 563 is identified in the Federal Facility Agreement and Consent Order (FFACO) as Septic Systems and consists of the following four Corrective Action Sites (CASs), located in Areas 3 and 12 of the Nevada Test Site: CAS 03-04-02, Area 3 Subdock Septic Tank CAS 03-59-05, Area 3 Subdock Cesspool CAS 12-59-01, Drilling/Welding Shop Septic Tanks CAS 12-60-01, Drilling/Welding Shop Outfalls Closure activities were conducted from September to November 2009 in accordance with the FFACO (1996, as amended February 2008) and the Corrective Action Plan for CAU 563. The corrective action alternatives included No Further Action and Clean Closure.

  1. Update; Sodium advanced fast reactor (SAFR) concept

    SciTech Connect (OSTI)

    Oldenkamp, R.D.; Brunings, J.E. ); Guenther, E. ); Hren, R. )

    1988-01-01

    This paper reports on the sodium advanced fast reactor (SAFR) concept developed by the team of Rockwell International, Combustion Engineering, and Bechtel during the 3-year period extending from January 1985 to December 1987 as one element in the U.S. Department of Energy's Advanced Liquid Metal Reactor Program. In January 1988, the team was expanded to include Duke Engineering and Services, Inc., and the concept development was extended under DOE's Program for Improvement in Advanced Modular LMR Design. The SAFR plant concept employs a 450-MWe pool-type liquid metal cooled reactor as its basic module. The reactor assembly module is a standardized shop-fabricated unit that can be shipped to the plant site by barge for installation. Shop fabrication minimizes nuclear-grade field fabrication and reduces the plant construction schedule. Reactor modules can be used individually or in multiples at a given site to supply the needed generating capacity.

  2. Geothermal heating facilities for Frontier Inn, Susanville, California

    SciTech Connect (OSTI)

    Not Available

    1982-03-01

    The Frontier Inn, located in Susanville, California, is a 38 unit motel composed of six major sections (coffee shop, A frame units, apartments, back units, two story units and office). These sections were built over a number of years and exhibit widely varying types of construction. Space heating is provided by primarily electric resistance equipment with some propane use. Domestic hot water is provided primarily by propane with some electric resistance. The coffee shop uses fuel oil for both space and domestic hot water heating. The City of Susanville is currently in the process of installing a geothermal district heating system. Although the motel site is not located in the area of present construction activity, it is expected that the pipeline will be extended in the near future. This study examines the potential of retrofitting the existing heating facilities at the Frontier Inn to geothermal.

  3. Coatings and Process Development for Reduced Energy Automotive OEM Manufacturing

    Broader source: Energy.gov (indexed) [DOE]

    Furar, PPG Industries, Inc. U.S. DOE Advanced Manufacturing Office Program Review Meeting Washington, D.C. May 28-29, 2015 1 This presentation does not contain any proprietary, confidential, or otherwise restricted information. Project Objective  Develop coatings, processes and facility design to reduce energy consumption in automotive OEM paint shops  Technical Barriers  Maintaining coating properties at lower temperature cure  Low temperature cross-link chemistries not commercial

  4. Engaging Supply Chains in Energy Management | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Engaging Supply Chains in Energy Management Engaging Supply Chains in Energy Management Featuring presenters from PepsiCo and EUISSICA, this presentation covers ways of engaging industrial suppliers involved in energy management. PDF icon Engaging Supply Chains in Energy Management (April 10, 2012) PDF icon Questions & Answers More Documents & Publications Energy Management and Financing From Shop Floor to Top Floor: Best Business Practices in Energy Efficiency CHP SYSTEM AT FOOD

  5. Unique environmental remediation project on steep canyon successfully

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    completed Environmental remediation project on canyon completed Unique environmental remediation project on steep canyon successfully completed A team recently completed a remediation project that involved removing contaminated rock and soil from the parking lot of a busy shopping center. July 29, 2015 A telescoping crane hoists a spider excavator over Los Alamos Canyon before placing it on the canyon slope to excavate historically contaminated soil. A telescoping crane hoists a spider

  6. Visual Design Group | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Visual Design Group alternative text alternative text alternative text alternative text alternative text alternative text alternative text alternative text The Visual Design Group is a full-service graphics and video/animation studio serving the needs of Ames Laboratory and beyond. We offer a variety of services. Our graphics shop rates are $94/hour. There is no fee currently for our video and animation work. For Graphics Services work, please submit a request form here. For Video/Animation

  7. 1

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    environmental remediation project on steep canyon successfully completed July 29, 2015 LOS ALAMOS, N.M., July 29, 2015-A multi-disciplinary team recently completed a unique remediation project at Los Alamos National Laboratory (LANL) that involved removing contaminated rock and soil from a steep canyon slope that was only accessible from the parking lot of a busy shopping center. "This is a great example of early planning, and excellent teamwork," said LANS Project Manager Todd

  8. ORGANIZATIONAL CHART - CYCLOTRON INSTITUTE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2 DIRECTOR Tribble SEE Line Proj. Manager H. Clark Brinkley Chubaryan Horvat Hyman Senior ME Derrig Graduate Students Research Associates Research Scientists Research Group Leaders Administration/ Accounting Jeske Computer Systems Hagel Burch Senior Accelerator Physicist May Accelerator Physicists Kim H. Clark Tabacaru Operations Chief Abegglen Building Maint. Gallegos Kingsbury Mynar Piolet Electrical Shop Cowden Eisenmann Ford Gathings LaPoint Law Morgan O'Berski Peeler Russell Sherman Yendrey

  9. ORGANIZATIONAL CHART - CYCLOTRON INSTITUTE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    1 DIRECTOR Tribble SEE Line Proj. Manager H. Clark Brinkley Chubaryan Horvat Hyman Senior ME Derrig Graduate Students Research Associates Research Scientists Research Group Leaders Administration/ Accounting Jeske Computer Systems Hagel Burch Senior Accelerator Physicist May Accelerator Physicists Kim H. Clark Tabacaru Operations Chief Abegglen Building Maint. Gallegos Kingsbury Mynar Piolet Electrical Shop Cowden Eisenmann Ford Gathings LaPoint Law Morgan O'Berski Peeler Russell Sherman Yendrey

  10. ORGANIZATIONAL CHART - CYCLOTRON INSTITUTE VI-11 DIRECTOR Tribble

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Tribble SEE Line Proj. Manager H. Clark Brinkley Chen Chubaryan Horvat Hyman Roeder Tabacaru Graduate Students Research Associates Research Scientists Research Group Leaders Administration/ Accounting Jeske Computer Systems Hagel Burch Student Workers Senior Accelerator Physicist May Accelerator Physicists Kim H. Clark Roeder Tabacaru Operations Chief Abegglen Building Maint. Adams Mynar Electrical Shop/Accelerator Tech. Bailey Carmona Cowden Eisenmann Foxworth Gathings LaPoint Law Morgan Peeler

  11. ORGANIZATIONAL CHART - CYCLOTRON INSTITUTE VII-12 DIRECTOR Tribble

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2 DIRECTOR Tribble SEE Line Proj. Manager H. Clark Brinkley Chubaryan Horvat Hyman Roeder Tabacaru Graduate Students Research Associates Research Scientists Research Group Leaders Administration/ Accounting Jeske Computer Systems Hagel Burch Student Workers Senior Accelerator Physicist May Accelerator Physicists Kim H. Clark Roeder Tabacaru Operations Chief Abegglen Building Maint. Adams Kingsbury Mynar Piolet Electrical Shop/Accelerator Tech. Bailey Cowden Eisenmann Gathings LaPoint Law Morgan

  12. Outreach, Community Events & Festivals | Princeton Plasma Physics Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Outreach, Community Events & Festivals The Science Education Department at PPPL has a variety of portable scientific demonstrations, laboratories and experiments that explain the beauty and excitement of science, fusion and plasmas. In the recent past, we've set up shop at: Princyclopedia Communiversity Princeton University's Community & Staff day Science Teacher's Day and the Plasma Sciences Expo USA Science & Engineering Festival 2013 Open House Check back regularly to find out

  13. Microsoft Word - DOE-ID-INL-14-039.docx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    9 SECTION A. Project Title: Idaho Falls (IF)-639 (North Holmes Laboratory [NHL]) Machine Installation SECTION B. Project Description: The North Holmes Laboratory (NHL, IF-639) Machine Shop requires several large turning centers and milling machines. The proposed action would relocate five existing machines within the facility, in order to provide sufficient space for two additional (new) turning centers and milling machines. These machines will require electrical feeds and receptacles, as well

  14. Microsoft Word - Interim Work Authorization Form rev 2-9.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    rev. 2/9/05 * Submit original form to M. Montalvo, MS 69, promptly on completion of work. INTERIM Work Authorization Process for Activities by Non-SSRL Workers at SSRL This Work Authorization Process applies to all maintenance, repair, and installation work performed at SSRL by non-SSRL workers. All work must be initiated by a technically qualified SSRL staff person (e.g. accelerator system manager, shop manager, facilities staff member, beam line engineer, etc.) who will serve as the

  15. Vacuum Attachment for Collection of Lithium Powder ---- Inventor(s) Hans

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Schneider and Stephan Jurczynski | Princeton Plasma Physics Lab Vacuum Attachment for Collection of Lithium Powder ---- Inventor(s) Hans Schneider and Stephan Jurczynski The Vacuum Attachment is part of an integrated system designed to collect Lithium (Li) Power for storage in mineral oil or to passivate it in Vinegar or Chilled Water. Major components are: Mister, Li Trap, Oil Trap or Combustion Chamber and Ash rated Shop Vacuum. The Mister provides a fine coating of mineral oil, vinegar or

  16. Electronic Fabrication & Repair | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Electronic Fabrication & Repair The Electronics group provides custom design and fabrication of electronic equipment.. We convert ideas into custom-finished equipment in our shop using ORCAD Schematic Capture and PCB Layout software in conjunction with our PCB machine to make prototype circuit boards in-house. Our technicians also aid in automating and controlling research project instrumentation using Texas Instruments LabView. We repair all kinds of scientific and laboratory electronic and

  17. Jefferson Lab Engineering

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Engineering Privacy and Security Notice Skip over navigation search JLab Engineering Please upgrade your browser. This site's design is only visible in a graphical browser that supports web standards, but its content is accessible to any browser. Concerns? Engineering Division Engineering Pressure Systems Seminars/Training print version Mechanical Systems Mechanical Engineering - Document Control Survey Alignment Machine Shop Installation/Vacuum Cryogenics Cryogenics - Cryogenics Department

  18. DATE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    6 SECTION A. Project Title: TRA-653 HVAC Modifications SECTION B. Project Description: The proposed project plans to replace the existing blowers, swamp coolers and electric heaters in the Idaho National Laboratory (INL) Test Reactor Area-653 (TRA-653) office area with three roof mounted heating, ventilating and air conditioning (HVAC) units; and install six roof mounted HVAC units at the TRA-653 machine shop area. These modifications are needed to enhance workplace habitability, maintain a more

  19. DATE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    4-017 SECTION A. Project Title: Test Reactor Area (TRA)-653 Conference Room Modifications SECTION B. Project Description: The Advanced Test Reactor (ATR) Maintenance Shop, building Test Reactor Area (TRA)-653, located at the ATR Complex, has an upstairs conference room capable of being used as one large conference room or can be split into two conference rooms by a sliding curtain divider. The current configuration causes meeting interruptions due to the one available door limiting personnel

  20. DATE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    1 of 2 CX Posting No.: DOE-ID-INL-14-018 SECTION A. Project Title: Materials and Fuel Complex (MFC)-782 Fire Sprinkler Installation SECTION B. Project Description: MFC-782 (Machine Shop) does not currently have a fire sprinkler system. In order to be in compliance with National Fire Protection Association (NFPA) requirements, an automated sprinkler system needs to be installed. The proposed project would consist of removing existing fire water line, drain line, potable water line, fire alarm

  1. Energy Information Administration (EIA)- Commercial Buildings Energy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Consumption Survey (CBECS) Data 2003 CBECS Survey Data 2012 | 2003 | 1999 | 1995 | 1992 | Previous Building Characteristics Consumption & Expenditures Microdata Methodology Building Characteristics In the 2003 CBECS, the survey procedures for strip shopping centers and enclosed malls ("mall buildings") were changed from those used in previous surveys, and, as a result, mall buildings are now excluded from most of the 2003 CBECS tables. Therefore, some data in the majority of

  2. Microsoft Word - Document1

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Views: CAMD is on life support Advocate Opinion page staff Published: Oct 28, 2009 - Page: 8B LSU's Center for Advanced Microstructures and Devices is near Baton Rouge's Towne Center shopping center, but CAMD deals in a different kind of marketplace. CAMD is part of the global marketplace of ideas. And in the 21st-century economy, which places more value on brains than brawn, CAMD is having trouble competing. As with so many Louisiana institutions suffering a competitive disadvantage with

  3. Microsoft Word - VI_11_Organizational Chart.docx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Yennello SEE Line Proj. Manager H. Clark Brinkley Chen Chubaryan Horvat Hyman Roeder Tabacaru Graduate Students Research Associates Research Scientists Research Group Leaders Administration/ Accounting Jeske Computer Systems Hagel Burch Student Worker Senior Accelerator Physicist May Accelerator Physicists Kim H. Clark Roeder Tabacaru Operations Chief Abegglen Building Maint. Adams Mynar Student Worker Electrical Shop/Accelerator Tech. Bailey Carmona Cowden Eisenmann Foxworth Gathings LaPoint

  4. Biofuels Marker Opportunities

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    for Convenience & Fuel Retailing Biofuels Market Opportunities John Eichberger NACS Vice President Government Relations Fuels Institute Executive Director The Association for Convenience & Fuel Retailing Influencing Consumers Follow the money The Association for Convenience & Fuel Retailing The Association for Convenience & Fuel Retailing Consumers Focused on $ January 2014 Consumer Survey: * 2/3 of consumers shop by price * 2/3 will go out of their way to save 5 cpg To save 5

  5. Strategic Financing Partnerships Help Jacksonville Program Take Loans From

    Energy Savers [EERE]

    Buydown to Uptake | Department of Energy Strategic Financing Partnerships Help Jacksonville Program Take Loans From Buydown to Uptake Strategic Financing Partnerships Help Jacksonville Program Take Loans From Buydown to Uptake In early 2011, the ShopSmart with JEA program in Jacksonville, Florida, began offering an energy efficiency interest rate buydown incentive in an effort to provide more enticing and affordable loans for homeowners to finance energy efficiency upgrades. Using seed

  6. WEBINAR: LED LIGHTING IN A PERFORMING ARTS BUILDING | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    WEBINAR: LED LIGHTING IN A PERFORMING ARTS BUILDING WEBINAR: LED LIGHTING IN A PERFORMING ARTS BUILDING Can LEDs render skin tones and makeup accurately in a dressing room? Can they provide the vertical footcandles in a studio to make dancers' bodies visible, or deliver acting studio lighting to bring out facial expressions and body movements? Can LEDs deliver adequate flicker-free light in the Scene Shop, where students are using saws and other construction tools? And, can they compete with

  7. MARYLAND HELPS RESIDENTS AND BUSINESSES TO BE SMART | Department of Energy

    Energy Savers [EERE]

    MARYLAND HELPS RESIDENTS AND BUSINESSES TO BE SMART MARYLAND HELPS RESIDENTS AND BUSINESSES TO BE SMART MARYLAND HELPS RESIDENTS AND BUSINESSES TO BE SMART While the historic downtowns of cities throughout Maryland are known for their charming mix of quaint shops and picturesque homes, many of the older buildings are not energy efficient. Spurred by these historic commercial centers to launch a statewide energy efficiency campaign, the state's Department of Housing and Community Development

  8. Goodbye, Watts. Hello, Lumens. (Low-Resolution Billboard) | Department of

    Energy Savers [EERE]

    Energy Low-Resolution Billboard) Goodbye, Watts. Hello, Lumens. (Low-Resolution Billboard) Low-resolution JPG of billboard reading, 'Goodbye Watts. Hello Lumens. The new way to shop for light. Energysaver.gov Image icon DoE_Billboard_Goodbye_Watts_web.jpg More Documents & Publications Goodbye, Watts. Hello, Lumens. (High-Resolution JPG Billboard) Goodbye, Watts. Hello, Lumens. (High-Resolution EPS

  9. Holiday Gifts for Energy Efficiency | Department of Energy

    Energy Savers [EERE]

    Holiday Gifts for Energy Efficiency Holiday Gifts for Energy Efficiency December 18, 2013 - 3:58pm Addthis Energy-efficient light bulbs can make great energy-saving stocking stuffers. Energy-efficient light bulbs can make great energy-saving stocking stuffers. Erik Hyrkas Erik Hyrkas Media Relations Specialist, Office of Energy Efficiency & Renewable Energy How can I participate? Look for these energy-saving gifts while doing your holiday shopping this year. As the days get colder and

  10. About the Building Technologies Office | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    About the Building Technologies Office About the Building Technologies Office What We Do We lead a vast network of research and industry partners to continually develop innovative, cost-effective energy saving solutions-better products, better new homes, better ways to improve older homes, and better buildings in which we work, shop, and lead our everyday lives. Why It Matters Energy efficiency is a low cost way to save money, support job growth, reduce pollution, and improve the competitiveness

  11. Energy Efficiency for the Nunamiut People

    Office of Environmental Management (EM)

    Energy Efficiency for the Nunamiut People Yukon River Inter Tribal Watershed Council Nunamiut Corporation 2 Nunamiut Corporation owned buildings where efficiency upgrades were implemented Nunamiut Corporate Office/Hotel Nunamiut Restaurant Nunamiut Corporation Managers' House Nunamiut Corporate Store 3 Nunamiut Corporation Shop Project Overview Under this project, the Yukon River Inter-tribal Watershed Council (YRITWC) will: 1) Educate local community members, elders and youth on the

  12. Energy-Saving Homes, Buildings, & Manufacturing (Fact Sheet), Office of Energy Efficiency and Renewable Energy, U.S. Department of Energy (DOE)

    Office of Environmental Management (EM)

    energy-saving solutions, which helps make our country run better through increased efficiency-better plants, manufacturing processes, products, new homes, ways to improve older homes, and buildings in which to work, shop, and lead our everyday lives. Highlights of the EERE portfolio include: Better Buildings Challenge EERE is spearheading this new public-private leadership program to reduce commercial building energy use by 20% by 2020, to help save $40 billion on energy bills annually, and to

  13. Hoisting and Rigging

    Office of Environmental Management (EM)

    6 MISCELLANEOUS LIFTING DEVICES 16-i This chapter provides requirements for the operation, inspection, testing, and maintenance of miscellaneous lifting devices including portable A frames (sometimes referred to as portable gantries), Truck mounted cranes with a capacity of 1 ton or less not covered in ASME B30.5 (.Mobile and Locomotive Cranes.) and self contained shop cranes as addressed by ASME PALD (.Portable Automotive Lifting Devices) (for latest ASME standards, see

  14. Financing Energy-Efficient Homes | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Services » Incentives & Financing » Financing Energy-Efficient Homes Financing Energy-Efficient Homes Financing Energy-Efficient Homes You can benefit from energy-efficient financing whether you're buying, selling, refinancing, or remodeling a home. If you're shopping for an energy-efficient home, an energy-efficient mortgage (EEM) can help you qualify for a more expensive home. The EEM takes into account lower utility costs, so you can afford a slightly larger mortgage payment.

  15. Frequently Asked Questions: Lighting Choices to Save You Money | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy Frequently Asked Questions: Lighting Choices to Save You Money Frequently Asked Questions: Lighting Choices to Save You Money Frequently Asked Questions: Lighting Choices to Save You Money Below are some of the most frequently asked questions and answers about the new lighting efficiency standards. Learn more about your lighting choices and find out how to shop for lights by lumens, not watts. Why are my lighting choices changing? What is the Energy Independence and Security Act of

  16. DOE - Office of Legacy Management -- Springdale_FUSRAP

    Office of Legacy Management (LM)

    Pennsylvania Springdale, Pennsylvania, Site FUSRAP Site Springdale Map Background-The Springdale, Pennsylvania, Site was remediated under the Formerly Utilized Sites Remedial Action Program (FUSRAP). FUSRAP was established in 1974 to remediate sites where radioactive contamination remained from Manhattan Project and early U.S. Atomic Energy Commission operations. History-The Springdale Site was a privately owned metal fabrication shop that provided uranium metal machining services to the

  17. Alternative Fuels Data Center

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Fuel Economy Test Procedures and Labeling The U.S. Environmental Protection Agency (EPA) is responsible for motor vehicle fuel economy testing. Manufacturers test their own vehicles and report the results to EPA. EPA reviews the results and confirms a portion of them using their own testing facilities. To aid consumers shopping for new vehicles, EPA redesigned the fuel economy window sticker posted on all new cars and light trucks starting with Model Year 2013 vehicles to be easier to read and

  18. Evaluation Project 4492

    National Nuclear Security Administration (NNSA)

    9-06-2011 NNSA-B-11-0289 Sandia National Laboratories/New Mexico (SNL/NM) proposes to create a new office area in Room 126 of Building 840, Development Shops and Offices, to remove the heat treating equipment, and to install fire protection/code upgrades. ✖ ✖ ✖ Sandia Site Office Bldg. 840 Office Relocation, Heat Treating Equipment Removal, and Fire Protection Upgrades Sandia National Laboratories - New Mexico LACY,SUSAN DOYLENE 09/06

  19. Advanced Manufacturing | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Advanced Manufacturing Advanced Manufacturing EERE leads a robust network of researchers and other partners to continually develop cost-effective energy-saving solutions that help make our country run better through increased efficiency — promoting better plants, manufacturing processes, and products; more efficient new homes and improved older homes; and other solutions to enhance the buildings in which we work, shop, and lead our everyday lives. EERE leads a robust network of researchers

  20. Buildings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Buildings Buildings EERE leads a robust network of researchers and other partners to continually develop cost-effective energy-saving solutions that help make our country run better through increased efficiency — promoting better plants, manufacturing processes, and products; more efficient new homes and improved older homes; and other solutions to enhance the buildings in which we work, shop, and lead our everyday lives. EERE leads a robust network of researchers and other partners to

  1. Government Energy Management | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Government Energy Management Government Energy Management EERE leads a robust network of researchers and other partners to continually develop cost-effective energy-saving solutions that help make our country run better through increased efficiency — promoting better plants, manufacturing processes, and products; more efficient new homes and improved older homes; and other solutions to enhance the buildings in which we work, shop, and lead our everyday lives. EERE leads a robust network of

  2. Homes | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Homes Homes EERE leads a robust network of researchers and other partners to continually develop cost-effective energy-saving solutions that help make our country run better through increased efficiency — promoting better plants, manufacturing processes, and products; more efficient new homes and improved older homes; and other solutions to enhance the buildings in which we work, shop, and lead our everyday lives. EERE leads a robust network of researchers and other partners to continually

  3. Office of Budget | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Office of Budget Office of Budget The Office of Budget serves as a one-stop shop for reporting EERE budget activities, coordinating budget formulation, execution and performance management activities. The office tracks current and historical funding, responds to inquiries from Congress, the Office of Management and Budget, and the CFO, prepares Congressional briefings, coordinates budget submissions, and guides the development of justification narrative, financial exhibits and other documents.

  4. Lighting | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Lighting Lighting When you're shopping for lightbulbs, compare lumens and use the Lighting Facts label to be sure you're getting the amount of light, or level of brightness, you want. You can save money and energy while lighting your home and still maintaining good light quantity and quality. Consider energy-efficient lighting options to use the same amount of light for less money. Learn strategies for comparing and buying lighting products and using them efficiently. Featured Lighting Choices

  5. Efficient Technologies and Products for Federal Facilities | Department of

    Office of Environmental Management (EM)

    Energy Technology Deployment » Efficient Technologies and Products for Federal Facilities Efficient Technologies and Products for Federal Facilities The Federal Energy Management Program (FEMP) provides a one-stop shop for finding energy- and water-efficient technologies and products that can help agenices meet federal facility goals and requirements. Find technologies and products by category or efficiency program below, or use the advanced search to sort by program, topic, or campaigns

  6. Historical development of the windmill

    SciTech Connect (OSTI)

    Shepherd, D.G.

    1990-12-01

    Throughout history, windmill technology represented the highest levels of development in those technical fields we now refer to as mechanical engineering, civil engineering, and aerodynamics. This report describes key stages in the technical development of windmills as prime movers -- from antiquity to construction of the well-known Smith-Putnam wind turbine generator of the 1940's, which laid the foundation for modern wind turbines. Subjects covered are windmills in ancient times; the vertical-axis Persian windmill; the horizontal-axis European windmill (including both post mills and tower mills); technology improvements in sails, controls, and analysis; the American farm windmill; the transition from windmills to wind turbines for generating electricity at the end of the 19th century; and wind turbine development in the first half of the 20th century. 43 refs.

  7. Mentoring Among Scientists: Implications of Interpersonal Relationships within a Formal Mentoring Program

    SciTech Connect (OSTI)

    Bryan D. Maughan

    2006-11-01

    Mentoring is an established strategy for learning that has its root in antiquity. Most, if not all, successful scientists and engineers had an effective mentor at some point in their career. In the context of scientists and engineers, mentoring has been undefined. Reports addressing critical concerns regarding the future of science and engineering in the U.S. mention the practice of mentoring a priori, leaving organizations without guidance in its application. Preliminary results from this study imply that formal mentoring can be effective when properly defined and operationalized. Recognizing the uniqueness of the individual in a symbiotic mentor-protg relationship significantly influences a protgs learning experience which carries repercussions into their career intentions. The mentor-protg relationship is a key factor in succession planning and preserving and disseminating critical information and tacit knowledge essential to the development of leadership in the science and technological industry.

  8. Mold Heating and Cooling Pump Package Operator Interface Controls Upgrade

    SciTech Connect (OSTI)

    Josh A. Salmond

    2009-08-07

    The modernization of the Mold Heating and Cooling Pump Package Operator Interface (MHC PP OI) consisted of upgrading the antiquated single board computer with a proprietary operating system to off-the-shelf hardware and off-the-shelf software with customizable software options. The pump package is the machine interface between a central heating and cooling system that pumps heat transfer fluid through an injection or compression mold base on a local plastic molding machine. The operator interface provides the intelligent means of controlling this pumping process. Strict temperature control of a mold allows the production of high quality parts with tight tolerances and low residual stresses. The products fabricated are used on multiple programs.

  9. Setup reduction approaches for machining

    SciTech Connect (OSTI)

    Gillespie, L.K.

    1997-04-01

    Rapid setup is a common improvement approach in press working operations such as blanking and shearing. It has paid major dividends in the sheet metal industry. It also has been a major improvement thrust for high-production machining operations. However, the literature does not well cover all the setup operations and constraints for job shop work. This review provides some insight into the issues involved. It highlights the floor problems and provides insights for further improvement. The report is designed to provide a quick understanding of the issues.

  10. TEAM Technologies, Inc.

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Technologies, Inc. A New Mexico owned, SBA certified 8(a)/SDB Small Business Pulsed Power Support TEAM Technologies Inc. opened its doors in 1985 as a one-man operation in support of Sandia's Z Machine, a mainstay of the Lab's Pulsed Power program. No longer a one-man shop, TEAM employs more than 70 people and operates over 36,000 square feet of work space in Sandia's Science & Technology Park. According to TEAM's owner and CEO Bob Sachs, much of TEAM's growth over the years has been as a

  11. Development of a locomotive engine condition monitoring system

    SciTech Connect (OSTI)

    Broughton, C.; Holloway, R.; Webster, G.

    1997-12-31

    Outlines test procedures and results of a study of the application of the instantaneous crankshaft angular velocity (ICAV) engine condition monitoring system applied to three freight locomotives. The study involved the assessment of a prototype repair-shop diagnostic tool, based on prior experimental programs and the ICAV technology. Engine testing was carried out at four-month intervals for three separate trials on the locomotives. Experimental data obtained included power output, fuel consumption, cylinder firing pressure waveforms, and the ICAV waveforms. The performance of the ICAV system was judged on its ability to accurately predict the change in indicated mean effective pressure of each cylinder from one test to the next.

  12. 48 Star American Flag from Y-12 Plant in 1943

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    48 Star American Flag from Y-12 Plant in 1943 Y-12's history is full of examples of patriotism and a strong patriotic spirit has prevailed in all work areas. Today it is common to see American flags flying from many shops and work areas. From its very beginning, Y-12 workers have held fast to the knowledge that they were dedicating their efforts to preserving the freedom of the nation and many times even the freedom of many other nations of the world. From the Manhattan Project to the Cold War

  13. Semiautomatic cold wire feeder systems increase GTA productivity

    SciTech Connect (OSTI)

    Richardson, M. )

    1995-01-01

    Often, the focus of attempts to increase GTA welding productivity is on studies to determine if justification exists for additional workstations, or for the investment in new fully automated dedicated welding fixtures. Often less costly and simpler solutions can bring about the necessary means to increase production rates and reduce operating costs. For short-run production applications, it is almost impossible to justify the substantial investment in a dedicated automatic fixture. Now, low cost GTA cold wire feeder systems are within the reach of even small shops. The paper views how cold wire equipment has been applied in several GTAW applications to improve results.

  14. https://sweis.nv.doe.gov/References/RE%20WM%20activities%20at%2

    National Nuclear Security Administration (NNSA)

    From: Duke, Stefan [DukeSJ@nv.doe.gov] Sent: Saturday, December 19, 2009 1:26 PM To: Roles, Gary W. Subject: RE: WM activities at RSL and North Las Vegas Facility Gary, Here is the info you requested for the NLV facility. Please let me know if you need additional info. The majority of NLV's hazardous waste comes from the machine shop. The routine waste streams consist of Lead & solvent contaminated rags, lead metal shavings & debris. Some of the other non- routine waste streams are

  15. DOE-STD-1072-94 | Department of Energy

    Energy Savers [EERE]

    2-94 DOE-STD-1072-94 June 07, 1996 Guideline to Good Practices for Facility Condition Inspections at DOE Nuclear Facilities Canceled Effective October 2001, due to FY 2001 Sunset Review This guide is intended to provide a means for owner/operators to have an awareness of the way business is actually being conducted on the shop floor. Also, this guide is intended to provide a means for maintenance managers to impart their expectations to craftspersons as to how maintenance should be conducted.

  16. Photo of the Week: Oak Ridge in 1945 | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    James Edward Westcott was one of the only people permitted to have a camera at the Oak Ridge site during the Manhattan Project and the Cold War. He documented the lives of many of the residents and workers in the “Atomic City,” in the days before Oak Ridge National Laboratory was actually Oak Ridge National Lab. In this February 1945 photo, a young woman is welding in the prefabrication shop building, part of the K-25 uranium separation facilities, one of three Manhattan Project sites

  17. Frequently Asked Questions: Lighting Choices to Save You Money | Department

    Broader source: Energy.gov (indexed) [DOE]

    of Energy Frequently Asked Questions: Lighting Choices to Save You Money Below are some of the most frequently asked questions and answers about the new lighting efficiency standards. Learn more about your lighting choices and find out how to shop for lights by lumens, not watts. Why are my lighting choices changing? What is the Energy Independence and Security Act of 2007 (EISA 2007)? When will the new bulbs be phased in? What will the lighting standards mandated by EISA 2007 mean to

  18. Effective Monday, November 23, 2009, the ANSER Center will process all purchase

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Effective Monday, November 23, 2009, the ANSER Center will process all purchase orders funded using ANSER chart strings (containing Department ID 8286300). Please follow the procedures listed below. If you require access as a "Shopper" to Project Café, please complete the Project Cafe Security Access Form and e-mail a copy to Karolyn Godfrey. iBuy NU Orders: 1. Place order through iBuyNU, then please assign your shopping cart to Ria Hirsch, r-hirsch@northwestern.edu 2. If your order

  19. DOE/SC-ARM-15-087 Ordering ARM Data Continuous Improvement

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    7 Ordering ARM Data Continuous Improvement While every effort is made to ensure the quality and accuracy of the data, the occasional problem does arise. If quality issues are discovered while using ARM data, please contact the Data Quality Office at armdataquality@arm.gov or see dq.arm.gov for online reporting options. Be sure to include the datastream names and a description of the problem or error received. One-Stop Shopping: Getting the Data You Need From the ARM Data Archive,

  20. Jack Case … the man who helped bring uranium machining to Y-12

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    the man who helped bring uranium machining to Y-12 Most of you realize that Y-12 is basically a huge and very precise machine shop. For years it has been the nation's only uranium machining facility. All the secondaries (that part of the nuclear weapon that contains the nuclear material) currently in the nation's nuclear arsenal were manufactured at Y-12. In this history we have noted that Y-12 began as the uranium electromagnetic separation process plant that provided the uranium for Little

  1. Energy recovery experiment could lead way to new accelerators | Jefferson

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Lab One of four BE magnets Corey Butler, mechanical designer; (left to right) Alex Bogacz, CASA staff scientist and experiment co-spokesman; and Robby Hicks, mechanical engineer, stand with one of the four BE magnets and a section of vacuum chamber built by the Machine Shop specifically for the Energy Recovery experiment. Energy recovery experiment could lead way to new accelerators March 6, 2003 Jefferson Lab physicists will soon begin their own version of reuse - not with run-of-the-mill

  2. EV Charging Stations Take Off Across America | Department of Energy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    EV Charging Stations Take Off Across America EV Charging Stations Take Off Across America November 19, 2012 - 12:14pm Addthis This ChargePoint station is located in the Columbia River Gorge National Scenic Area in Stevenson, WA, -- an area that is adjacent to the city's shops, restaurants, spas and art galleries. | Photo courtesy of Port of Skamania. This ChargePoint station is located in the Columbia River Gorge National Scenic Area in Stevenson, WA, -- an area that is adjacent to the city's

  3. Lawrence Jones 121 Metals Development Building,

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    mpc.ameslab.gov Lawrence Jones 121 Metals Development Building, Ames, IA 50011-3020 jonesll@ameslab.gov 515-294-5236 Like high purity research-grade gadolinium. But the Materials Preparation Center at the Ames Laboratory is that scientific specialty shop where researchers can go for unmatched purity and quality in rare-earth specimens. It's also one of the few places in the world where scientists and engineers from academic institutions and industries can obtain custom-designed materials for

  4. IBM Blue Gene Architecture

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    How to use Open|SpeedShop to Analyze the Performance of Parallel Codes. Donald Frederick LLNL LLNL---PRES---508651 Performance Analysis is becoming more important ± Complex architectures ± Complex applications ± Mapping applications onto architectures Often hard to know where to start ± Which experiments to run first? ± How to plan follow---on experiments? ± What kind of problems can be explored? ± How to interpret the data? How to use OSS to Analyze the Performance of Parallel Codes? 2

  5. Fact #616: March 29, 2010 Household Vehicle-Miles of Travel by Trip Purpose

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    | Department of Energy 6: March 29, 2010 Household Vehicle-Miles of Travel by Trip Purpose Fact #616: March 29, 2010 Household Vehicle-Miles of Travel by Trip Purpose In 2009, getting to and from work accounted for about 27% of household vehicle-miles of travel (VMT). Work-related business was 8.4% of VMT in 2001, but declined to 6.7% in 2009, possibly due to advancements in computing technology making it possible for more business to be handled electronically. VMT for shopping was almost

  6. Fact #728: May 21, 2012 Average Trip Length is Less Than Ten Miles |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy 8: May 21, 2012 Average Trip Length is Less Than Ten Miles Fact #728: May 21, 2012 Average Trip Length is Less Than Ten Miles The average trip length (one-way) is 9.7 miles according to the 2009 Nationwide Personal Transportation Survey. Trip lengths vary by the purpose of the trip. Shopping and family/personal business are the shortest trips, on average. One-way trips to/from work average 12.2 miles. Trip Length by Purpose, 2009 Graphic showing trip length by purpose,

  7. P

    Office of Legacy Management (LM)

    P -.,. ~ * * , iy . * __.^ .--.. ~_____, __ l NATIONAL LEAD COMPANa * . -, - / _ 1 OF OHIO P. 0. BOX 158 MT. HEALTHY STATION CINCINNATI 31, OHIO Letter Subeontraet # S-18 Dated: September 15, 1952 Under Prime Contract A!T( 30-1)-l.l5ti ~0: E%EtRe M. Albaugh Alba Craft Shop 525 South Main Street Oxford, Ohio Gentlemen: .a 1. This letter, subject to your written acceptance and the approval of the Atomic Energy Commission (hereinafter called the "Commission"), sets forth the initial

  8. Reports

    Office of Legacy Management (LM)

    aehsed herewith ia Coaprehenaive Survey of USBEC mtp, Lewebldinge ad G~r~n&-owned Bpipment under SC & COntraCtCW'S COntrOl, as requested in AEC BULLETIN No. 48 dated April 26, 1917. .& Inols. Reports 10 acres NO. 5412 5435 5436 5421 5621 5432 5433 5434 5431 5437 Pipe Shop /j LOCATION Ij ij 88 1 / j Lske 'OntsTis Tohawanda !IS AEC Ordndnce 'Worki, Sllkffiqe ,Model wty, ,New York '8 I' j, i/ DESCRIPTION !! OF TT 'fro1 heti TX-2 fron inec s3n Die ylaed Ialst JS Eng- 1, 3x38 *ict 23, 144

  9. The Newest Addition to the ENERGY STAR Lineup: Water Heaters | Department

    Energy Savers [EERE]

    of Energy The Newest Addition to the ENERGY STAR Lineup: Water Heaters The Newest Addition to the ENERGY STAR Lineup: Water Heaters February 17, 2009 - 9:48am Addthis Elizabeth Spencer Communicator, National Renewable Energy Laboratory If you've gone shopping for new appliances sometime in the last decade, then you're probably familiar with the ENERGY STAR® label. ENERGY STAR is a partnership between the U.S. Department of Energy and the U.S. Environmental Protection Agency that sets

  10. 02-12-2010 NNSA-B-10-0015.PDF

    National Nuclear Security Administration (NNSA)

    12-2010 NNSA-B-10-0015 Sandia National Laboratories/New Mexico (SNL/NM) proposes to continue providing the experimental and field studies capacities needed to assist the U.S. Department of Energy's Field Office (CBFO) in assuring uninterrupted licensure and permitting of the Waste Isolation Pilot Plant. Many of the experimental and field studies are performed in or commence from Building NPHB (National Parks Highway B). An integral part of these studies is the Shop (Rooms 704 and 705). ✖

  11. Interagency Visitor Center at Santa Monica Mountains National Recreation Area

    High Performance Buildings Database

    Calabasas, CA This project was to develop the first visitor center for the Santa Monica Mountains National Recreation Area located in the Los Angeles, California area. The previous visitor center was across from a shopping mall in rental space at park headquarters in Thousand Oaks. The new facility is centrally located in the park at a much more appropriate natural and cultural resource setting. It is a partnership project with the Mountains Recreation and Conservation Authority, which is a local land conservation and park agency. It is also a joint facility with California State Parks.

  12. San Antonio Small Businesses "Seeing the Light" with Energy Upgrades |

    Energy Savers [EERE]

    Department of Energy San Antonio Small Businesses "Seeing the Light" with Energy Upgrades San Antonio Small Businesses "Seeing the Light" with Energy Upgrades March 21, 2012 - 2:27pm Addthis KBK to the Trade 1 of 5 KBK to the Trade Thanks to the City Lights program, this design shop is saving an estimated 25,500 kilowatt-hours and $2,000 on electricity bills each year. | Photo Credit: City of San Antonio Date taken: 2011-05-24 15:06 Gallista Gallery 2 of 5 Gallista

  13. What Efficiency Information Do You Look for When You Buy a Vehicle? |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Efficiency Information Do You Look for When You Buy a Vehicle? What Efficiency Information Do You Look for When You Buy a Vehicle? June 9, 2011 - 7:30am Addthis On Tuesday, Eric told you about some recent developments in vehicle technologies: Gasoline vehicle label Electric vehicle label Plug-in hybrid electric vehicle label One change that you'll soon see when you shop for vehicles is new fuel economy labels. The new versions of the labels include estimated annual fuel

  14. Are You Planning to Buy Energy-Efficient Products on Black Friday? |

    Energy Savers [EERE]

    Department of Energy Planning to Buy Energy-Efficient Products on Black Friday? Are You Planning to Buy Energy-Efficient Products on Black Friday? November 23, 2011 - 5:09am Addthis This week, Chris gave us some great information on shopping for energy-efficient products. He reminded us that the cost to run appliances and home office and electronics is just as important as the purchase price, and posted a new Energy Savers graphic that shows you how to read the EnergyGuide and Energy Star

  15. How do You Save Energy During the Holidays? | Department of Energy

    Energy Savers [EERE]

    do You Save Energy During the Holidays? How do You Save Energy During the Holidays? December 20, 2011 - 9:03am Addthis Between family vacations, shopping, and cooking extravagant meals, energy conservation isn't usually at the top our list of things to do during the holiday season. But there are plenty of ways to save money & energy even now by doing little - and even fun - things to reduce our utility bills and use less energy overall. This week, Amanda showed us how she saves money and

  16. 12 Days of Energy Savings | Department of Energy

    Energy Savers [EERE]

    12 Days of Energy Savings 12 Days of Energy Savings Addthis Day 12: Drive Your Way to Fuel Savings 1 of 12 Day 12: Drive Your Way to Fuel Savings Save money on fuel costs by emptying your car after all your shopping trips -- an extra 100 pounds in your vehicle could increase gas costs by up to $.08 a gallon. Image: Sarah Gerrity, Energy Department Day 11: Plug Holiday Decorations into Power Strips 2 of 12 Day 11: Plug Holiday Decorations into Power Strips Stop phantom loads -- which cost

  17. Digging Into Efficient Landscaping This Spring | Department of Energy

    Energy Savers [EERE]

    Digging Into Efficient Landscaping This Spring Digging Into Efficient Landscaping This Spring March 7, 2012 - 1:40pm Addthis Amanda McAlpin Preparing for its seasonal cycle, the warmth from the sun is growing stronger, and with temperatures slowly increasing, I was able to dine on the patio at my local coffee shop this weekend. It's evident the days of winter are almost past, and springtime planting around the house will soon begin. Trees, shrubs, and other vegetation thriving around your home

  18. HEN YOi?K OPERATIONS OFFICE ANKUAL REPORT, FISCAL YEAX 1950

    Office of Legacy Management (LM)

    HEN YOi?K OPERATIONS OFFICE ANKUAL REPORT, FISCAL YEAX 1950 HEALTH A;iD S:FETY OIVISIOH being -sde for exm.ination.of &VI Exnsxick Iaborato:y eqloyees. ILscelleneous In adction to the xzjor co-' ,,ractors described in the body of this' che$e.-, u conside:zble r,xber of other plants oz2 fecilities hes been visite2. (A ~lese have ir.ciEded cz.rts of the iien York Qereticns Office such US ITew Zr-.-.s-zick L.zborztor-,-, the ~43 IZxrolcgicel Laboratory ar;t the ! I lsboratory and shop

  19. Comparing Hybrid and Plug-in Electric Vehicles | Department of Energy

    Office of Environmental Management (EM)

    Comparing Hybrid and Plug-in Electric Vehicles Comparing Hybrid and Plug-in Electric Vehicles June 6, 2013 - 11:02am Addthis A variety of hybrid and all-electric vehicles are available for consumers. | Photo courtesy of Andrew Hudgins, NREL 17078. A variety of hybrid and all-electric vehicles are available for consumers. | Photo courtesy of Andrew Hudgins, NREL 17078. Elizabeth Spencer Communicator, National Renewable Energy Laboratory How can I participate? If you're shopping for a new hybrid

  20. WCAP-10574

    Office of Legacy Management (LM)

    WCAP-10574 WESTINGHOUSE CLASS 3 DECONTAMINATION AN0 DECOMMISSIONING OF THE WESTINGHOUSE NUCLEAR FUEL FACILITY AT CHESWICK, PA FOR : UNITED STATES DEPARTMENT OF ENERGY CONTRACT NO. ,DE-AC06-82RL10363 Volume 1 of 2 p4. ;rii -3 J. V. Oenero R. A. Lange M. L. Ray J. L. Shoulders H. C. Woodsum- June 1984 APPROVED: '1 v. cd? po, Manager Engineering and Technology Service Work Performed Under Shop Order Number PFDL-50503 WESTINGHOUSE ELECTRIC CORPORATION NUCLEAR ENERGY SYSTEMS P.O. 80X 3912 PITTSBURGH,

  1. 12 Days of Energy Savings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Days of Energy Savings 12 Days of Energy Savings December 24, 2012 - 9:30am Addthis Day 12: Drive Your Way to Fuel Savings 1 of 12 Day 12: Drive Your Way to Fuel Savings Save money on fuel costs by emptying your car after all your shopping trips -- an extra 100 pounds in your vehicle could increase gas costs by up to $.08 a gallon. Image: Sarah Gerrity, Energy Department Day 11: Plug Holiday Decorations into Power Strips 2 of 12 Day 11: Plug Holiday Decorations into Power Strips Stop phantom

  2. A New Generation of Labels for a New Generation of Cars | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy A New Generation of Labels for a New Generation of Cars A New Generation of Labels for a New Generation of Cars May 25, 2011 - 5:42pm Addthis A New Generation of Labels for a New Generation of Cars John Schueler John Schueler Former New Media Specialist, Office of Public Affairs What does this mean for me? An improved car buying experience Clear cut cost comparisons of vehicles If you've ever gone through the process of shopping for a new car, you know just how difficult it can be to

  3. ARC4461kit

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    talk about a Disaster Supplies Kit? After a disaster, local officials and relief workers will be on the scene, but they cannot reach everyone immediately. You could get help in hours, or it may take days. Basic services, such as electricity, gas, water, and tele- phones, may be cut off, or you may have to evacuate at a moment's notice. You probably won't have time to shop or search for the supplies you'll need. Your family will cope best by preparing for disaster before it strikes. What is a

  4. Buildings Energy Data Book: 3.7 Retail Markets and Companies

    Buildings Energy Data Book [EERE]

    3 2010 Top Supermarkets, by Sales 2010 All Commodity Supermarket Wal-Mart Stores 3,001 Kroger Co. 2,460 Safeway, Inc. 1,461 Supervalu, Inc. 1,504 Ahold USA, Inc. (Stop and Shop, Giant) 746 Publix Super Markets, Inc. 1,035 Delhaize America, Inc. (Food Lion) 1,641 H.E. Butt Grocery Co. (HEB) 291 Meijer Inc. 195 Great Atlantic & Pacific Tea Co. (Pathmark) 373 Note(s): Source(s): All commodity volume in this example represents the "annualized range of the estimated retail sales volume of

  5. Useful Links for Small Businesses | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Useful Links for Small Businesses Useful Links for Small Businesses Business USA A product of collective thoughts and inputs from the following agencies who have pledged their commitment to making this site a one-stop shop for everything related to business in the USA. Electronic Subcontracting Reporting System (eSRS) This is the official site for the electronic Subcontracting Reporting System (eSRS). The use of eSRS promises to create higher visibility and introduce a more transparency into the

  6. Microsoft Outlook - Memo Style

    National Nuclear Security Administration (NNSA)

    Duke, Stefan <DukeSJ@nv.doe.gov> Sent: Saturday, December 19, 2009 1:26 PM To: Roles, Gary W. Subject: RE: WM activities at RSL and North Las Vegas Facility Gary, Here is the info you requested for the NLV facility. Please let me know if you need additional info. The majority of NLV's hazardous waste comes from the machine shop. The routine waste streams consist of Lead & solvent contaminated rags, lead metal shavings & debris. Some of the other non-routine waste streams are

  7. A Tool for Interactive Protein Manipulation

    Energy Science and Technology Software Center (OSTI)

    2005-03-28

    ProteinShop is a graphical environment that facilitates a solution to the protein prediction problem through a combination of unique features and capabilities. These include: 1. Helping researchers automatically generate 3D protein structures from scratcW by using the sequence of amino acids and secondary structure specifications as input. 2. Enabling users to apply their accumulated biochemical knowledge and intuition during the interactive manipulation of structures. 3. FacIlitating interactive comparison and analysis of alternative structures through visualizationmore » of free energy computed during modeling. 4. Accelerating discovery of low-energy configurations by applying local optimizations plug-in to user-selected protein structures. ProteinShop v.2.0 includes the following new features: - Visualizes multiple-domain structures - Automatically creates a user-specified number of beta-sheet configurations - Provides the interface and the libraries for energy visualization and local minimization of protein structures - Reads standard POB files without previous editing« less

  8. A Retrofit Tool for Improving Energy Efficiency of Commercial Buildings

    SciTech Connect (OSTI)

    Levine, Mark; Feng, Wei; Ke, Jing; Hong, Tianzhen; Zhou, Nan

    2013-06-06

    Existing buildings will dominate energy use in commercial buildings in the United States for three decades or longer and even in China for the about two decades. Retrofitting these buildings to improve energy efficiency and reduce energy use is thus critical to achieving the target of reducing energy use in the buildings sector. However there are few evaluation tools that can quickly identify and evaluate energy savings and cost effectiveness of energy conservation measures (ECMs) for retrofits, especially for buildings in China. This paper discusses methods used to develop such a tool and demonstrates an application of the tool for a retrofit analysis. The tool builds on a building performance database with pre-calculated energy consumption of ECMs for selected commercial prototype buildings using the EnergyPlus program. The tool allows users to evaluate individual ECMs or a package of ECMs. It covers building envelope, lighting and daylighting, HVAC, plug loads, service hot water, and renewable energy. The prototype building can be customized to represent an actual building with some limitations. Energy consumption from utility bills can be entered into the tool to compare and calibrate the energy use of the prototype building. The tool currently can evaluate energy savings and payback of ECMs for shopping malls in China. We have used the tool to assess energy and cost savings for retrofit of the prototype shopping mall in Shanghai. Future work on the tool will simplify its use and expand it to cover other commercial building types and other countries.

  9. Automated Cache Performance Analysis And Optimization

    SciTech Connect (OSTI)

    Mohror, Kathryn

    2013-12-23

    While there is no lack of performance counter tools for coarse-grained measurement of cache activity, there is a critical lack of tools for relating data layout to cache behavior to application performance. Generally, any nontrivial optimizations are either not done at all, or are done by hand requiring significant time and expertise. To the best of our knowledge no tool available to users measures the latency of memory reference instructions for partic- ular addresses and makes this information available to users in an easy-to-use and intuitive way. In this project, we worked to enable the Open|SpeedShop performance analysis tool to gather memory reference latency information for specific instructions and memory ad- dresses, and to gather and display this information in an easy-to-use and intuitive way to aid performance analysts in identifying problematic data structures in their codes. This tool was primarily designed for use in the supercomputer domain as well as grid, cluster, cloud-based parallel e-commerce, and engineering systems and middleware. Ultimately, we envision a tool to automate optimization of application cache layout and utilization in the Open|SpeedShop performance analysis tool. To commercialize this soft- ware, we worked to develop core capabilities for gathering enhanced memory usage per- formance data from applications and create and apply novel methods for automatic data structure layout optimizations, tailoring the overall approach to support existing supercom- puter and cluster programming models and constraints. In this Phase I project, we focused on infrastructure necessary to gather performance data and present it in an intuitive way to users. With the advent of enhanced Precise Event-Based Sampling (PEBS) counters on recent Intel processor architectures and equivalent technology on AMD processors, we are now in a position to access memory reference information for particular addresses. Prior to the introduction of PEBS counters, cache behavior could only be measured reliably in the ag- gregate across tens or hundreds of thousands of instructions. With the newest iteration of PEBS technology, cache events can be tied to a tuple of instruction pointer, target address (for both loads and stores), memory hierarchy, and observed latency. With this information we can now begin asking questions regarding the efficiency of not only regions of code, but how these regions interact with particular data structures and how these interactions evolve over time. In the short term, this information will be vital for performance analysts understanding and optimizing the behavior of their codes for the memory hierarchy. In the future, we can begin to ask how data layouts might be changed to improve performance and, for a particular application, what the theoretical optimal performance might be. The overall benefit to be produced by this effort was a commercial quality easy-to- use and scalable performance tool that will allow both beginner and experienced parallel programmers to automatically tune their applications for optimal cache usage. Effective use of such a tool can literally save weeks of performance tuning effort. Easy to use. With the proposed innovations, finding and fixing memory performance issues would be more automated and hide most to all of the performance engineer exper- tise under the hood of the Open|SpeedShop performance tool. One of the biggest public benefits from the proposed innovations is that it makes performance analysis more usable to a larger group of application developers. Intuitive reporting of results. The Open|SpeedShop performance analysis tool has a rich set of intuitive, yet detailed reports for presenting performance results to application developers. Our goal was to leverage this existing technology to present the results from our memory performance addition to Open|SpeedShop. Suitable for experts as well as novices. Application performance is getting more difficult to measure as the hardware platforms they run on become more complicated. This makes life dif

  10. Demonstration of LED Retrofit Lamps at the Jordan Schnitzer Museum of Art

    SciTech Connect (OSTI)

    Miller, Naomi J.

    2011-09-01

    The Jordan Schnitzer Museum of Art in Eugene, Oregon, houses a remarkable permanent collection of Asian art and antiquities, modern art, and sculpture, and also hosts traveling exhibitions. In the winter and spring of 2011, a series of digital photographs by artist Chris Jordan, titled "Running the Numbers," was exhibited in the Coeta and Donald Barker Special Exhibitions Gallery. These works graphically illustrate waste (energy, money, health, consumer objects, etc.) in contemporary culture. The Bonneville Power Administration and the Eugene Water and Electricity Board provided a set of Cree 12W light-emitting diode (LED) PAR38 replacement lamps (Cree LRP38) for the museum to test for accent lighting in lieu of their standard Sylvania 90W PAR38 130V Narrow Flood lamps (which draw 78.9W at 120V). At the same time, the museum tested LED replacement lamps from three other manufacturers, and chose the Cree lamp as the most versatile and most appropriate color product for this exhibit. The lamps were installed for the opening of the show in January 2011. This report describes the process for the demonstration, the energy and economic results, and results of a survey of the museum staff and gallery visitors on four similar clusters of art lighted separately by four PAR38 lamps.

  11. Archaeofaunal insights on pinniped-human interactions in the northeastern Pacific

    SciTech Connect (OSTI)

    Gifford-Gonzales, D; Newsome, S; Koch, P; Guilderson, T; Snodgrass, J; Burton, R

    2004-02-07

    Human exploitation of pinnipeds has considerable antiquity but shows increasing impacts on population numbers in the Holocene. Pinnipeds are a rich source of fat as well as protein. A few well-documented cases of regional extirpation of seals and sea lions by non-industrial peoples exist. The northeastern Pacific region, from southern California to Alaska, has yielded archaeological evidence for distributions and abundances of eared seals that differs markedly from historically documented biogeography. This is especially true of the northern fur seal (Callorhinus ursinus), among the most common pinnipeds in many archaeological sites from the Santa Barbara Channel area through to Kodiak Islands. This chapter reviews contemporary eared seal biogeography, evidence for the earlier timing and extent, of occurrence of northern fur seals along the northeastern Pacific coast, zooarchaeological and isotopic evidence for their foraging and probable maintenance of rookeries in lower latitudes, and for their disappearance from the southernmost part of their ancient distribution well before European contact. It also reviews ongoing debates over the behavioral ecology of ancient fur seals and over humans role in contributing to their disappearance.

  12. Nuclear Weapons Complex reconfiguration study

    SciTech Connect (OSTI)

    Not Available

    1991-01-01

    Shortly after assuming duties as Secretary of Energy, I reviewed the Nuclear Weapons Complex Modernization Report'' submitted to the Congress in January 1989 as required by the National Defense Authorization Act of 1988 and 1989. My review showed that several of the report's assumptions needed to be re-evaluated. During this eighteen-month review, dramatic world changes forced further reassessments of the future Nuclear Weapons Complex. These changes are reflected in the new report. The new report presents a plan to achieve a reconfigured complex, called Complex-21. Complex-21 would be smaller, less diverse, and less expensive to operated than the Complex of today. Complex-21 would be able to safely and reliability support nuclear deterrent stockpile objectives set forth by the President and funded by the Congress. It would be consistent with realities of the emerging international security environment and flexible enough to accommodate the likely range of deterrent contingencies. In addition, Complex-21 would be constructed and operated to comply with all applicable federal, state, and local laws, regulations, and orders. Achieving Complex-21 will require significant resources. This report provides and organized approach toward selecting the most appropriate configuration for Complex-21, satisfying environmental requirements, and minimizing costs. The alternative -- to continue to use piecemeal fixes to run an antiquated complex -- will be more expensive and provide a less reliable Nuclear Weapons Complex. As a consequence, implementation of the Complex-21 plan is considered necessary to ensure continued viability of our nuclear deterrent.

  13. Building a Community Infrastructure for Scalable On-Line Performance Analysis Tools around Open|Speedshop

    SciTech Connect (OSTI)

    Miller, Barton

    2014-06-30

    Peta-scale computing environments pose significant challenges for both system and application developers and addressing them required more than simply scaling up existing tera-scale solutions. Performance analysis tools play an important role in gaining this understanding, but previous monolithic tools with fixed feature sets have not sufficed. Instead, this project worked on the design, implementation, and evaluation of a general, flexible tool infrastructure supporting the construction of performance tools as pipelines of high-quality tool building blocks. These tool building blocks provide common performance tool functionality, and are designed for scalability, lightweight data acquisition and analysis, and interoperability. For this project, we built on Open|SpeedShop, a modular and extensible open source performance analysis tool set. The design and implementation of such a general and reusable infrastructure targeted for petascale systems required us to address several challenging research issues. All components needed to be designed for scale, a task made more difficult by the need to provide general modules. The infrastructure needed to support online data aggregation to cope with the large amounts of performance and debugging data. We needed to be able to map any combination of tool components to each target architecture. And we needed to design interoperable tool APIs and workflows that were concrete enough to support the required functionality, yet provide the necessary flexibility to address a wide range of tools. A major result of this project is the ability to use this scalable infrastructure to quickly create tools that match with a machine architecture and a performance problem that needs to be understood. Another benefit is the ability for application engineers to use the highly scalable, interoperable version of Open|SpeedShop, which are reassembled from the tool building blocks into a flexible, multi-user interface set of tools. This set of tools targeted at Office of Science Leadership Class computer systems and selected Office of Science application codes. We describe the contributions made by the team at the University of Wisconsin. The project built on the efforts in Open|SpeedShop funded by DOE/NNSA and the DOE/NNSA Tri-Lab community, extended Open|Speedshop to the Office of Science Leadership Class Computing Facilities, and addressed new challenges found on these cutting edge systems. Work done under this project at Wisconsin can be divided into two categories, new algorithms and techniques for debugging, and foundation infrastructure work on our Dyninst binary analysis and instrumentation toolkits and MRNet scalability infrastructure.

  14. Chemical Hygiene and Safety Plan

    SciTech Connect (OSTI)

    Berkner, K.

    1992-08-01

    The objective of this Chemical Hygiene and Safety Plan (CHSP) is to provide specific guidance to all LBL employees and contractors who use hazardous chemicals. This Plan, when implemented, fulfills the requirements of both the Federal OSHA Laboratory Standard (29 CFR 1910.1450) for laboratory workers, and the Federal OSHA Hazard Communication Standard (29 CFR 1910.1200) for non-laboratory operations (e.g., shops). It sets forth safety procedures and describes how LBL employees are informed about the potential chemical hazards in their work areas so they can avoid harmful exposures and safeguard their health. Generally, communication of this Plan will occur through training and the Plan will serve as a the framework and reference guide for that training.

  15. Standards for message-passing in a distributed memory environment

    SciTech Connect (OSTI)

    Walker, D.W.

    1992-08-01

    This report presents a summary of the main ideas presented at the First CRPC Work-shop on Standards for Message Passing in a Distributed Memory Environment, held April 29-30, 1992, in Williamsburg, Virginia. This workshop attracted 68 attendees including representative from major hardware and software vendors, and was the first in a series of workshops sponsored by the Center for Research on Parallel Computation. The aim of this series of workshops is to develop and implement a standard for message passing on distributed memory concurrent computers, thereby making it easier to develop efficient, portable application codes for such machines. The report discusses the main issues raised in the CRPC workshop, and describes proposed desirable features of a message passing standard for distributed memory environments.

  16. Gasoline allies. [increasing control of regional markets by major petroleum companies

    SciTech Connect (OSTI)

    McKenna, D.

    1993-05-01

    This article concerns recent maneuvers of the major oil companies to control certain gasoline markets. In recent years they have abandoned, or severely reduced their operation in, certain markets to concentrate in others. This has left some regions with only two or three major suppliers of gasoline. Independent operators no longer have the flexibility to shop around for the cheapest gasoline, and are being slowly driven out of business by company-owned stores which sell at artificially low prices. The are several lawsuits in the courts challenging these practices as in violation of the anti-trust laws. The author claims that regional marketing activites of the major companies need closer monitoring by the Federal government.

  17. User antitrust suit alleges utility cabal limits buy-back

    SciTech Connect (OSTI)

    Efron, S.

    1984-10-15

    An antitrust suit against 90 Georgia electric utilities, charging that their monopoly of retail electricity sales should not preclude cogenerators and small power producers from selling surplus power to utilities elsewhere on the network, could set a national precedent allowing cogenerators to shop around for the best buy-back rate. Greensboro Lumber Co. charges that the utilities' refusal to wheel cogenerated power to potential purchasers represents a restraint of trade. The lumber company contends that cogenerators should sell to the wholesale market, where utilities have no state-granted monopoly. Attorneys for the two sides are unsure of the immediate outcome, but predict that antitrust action or threatened action could give cogenerators unfair leverage.

  18. Savannah River Laboratory monthly report

    SciTech Connect (OSTI)

    Not Available

    1985-12-01

    Efforts in the area of nuclear reactors and scientific computations are reported, including: robotics; reactor irradiation of nonend-bonded target slugs; computer link with Los Alamos National Laboratory; L-reactor thermal mitigation; aging of carbon in SRP reactor airborne activity confinement systems; and reactor risk assessment for earthquakes. Activities in chemical processes and environmental technology are reported, including: solids formation in a plutonium product stream; revised safety analysis reporting for F and H-Canyon operations; organic carbon analysis of DWPF samples; applications of Fourier transform infrared spectrometry; water chemistry analyzer for SRP reactors; and study of a biological community in Par Pond. Defense waste and laboratory operations activities include: Pu-238 waste incinerator startup; experimental canister frit blaster; saltstone disposal area design; powder metallurgy core diameter measurement; and a new maintenance shop facility. Nuclear materials planning encompasses decontamination and decommissioning of SRP facilities and a comprehensive compilation of environmental and nuclear safety issues. (LEW)

  19. Assessing the Feasibility of Comprehensive Energy Efficiency Upgrades at Potawatomi Carter Casino Hotel

    SciTech Connect (OSTI)

    Karman, Nathan A.

    2014-03-31

    The Forest County Potawatomi Community, a federally-recognized Indian Tribe with a strong commitment to the natural environment, sought and obtained funding to investigate energy efficient improvements to its Potawatomi Carter Casino & Hotel and the adjacent Potawatomi Carter C-Store and Smoke Shop. The resulting energy studies recommended energy conservation measures that would collectively reduce energy use by more than 30% at the facilities and would save approximately $200,000 per year in energy costs. Consistent with its commitment to the natural environment, and to advance its goal of energy independence using Carbon free or Carbon neutral renewable resources, the Community has already begun implementing certain measures and continues to seek funding sources necessary to implement the remaining measures.

  20. Modernization of open-hearth steelmaking

    SciTech Connect (OSTI)

    1995-05-01

    Most of the steel that has been produced domestically has been made by the open-hearth method - an obsolete technology that is now being phased out. Open-hearth steelmaking is labor- and energy-intensive, consumes large quantities of raw materials, and adversely impacts the environment. Nearly all open-hearth (OH) shops and the equipment therein have been fully amortized, and practical experience and research both here and abroad have shown that further capital investment in these facilities would be inexpedient. The use of OH steelmaking has thus declined rapidly in recent years worldwide (especially in the developed nations), leading to its almost complete disappearance in some countries. The worldwide trend is toward electrical and converter steelmaking processes, and this has significantly reshaped the face of the industry as a whole.

  1. Rotating Liner Engine: Improving Efficiency of Heavy Duty Diesels by Significant Friction Reduction, and Extending the Life of Heavy Duty Engines.

    SciTech Connect (OSTI)

    Dardalis, Dimitrios

    2013-12-31

    This report describes the work on converting a 4 cylinder Cummins ISB engine into a single cylinder Rotating Liner Engine functioning prototype that can be used to measure the friction benefits of rotating the cylinder liner in a high pressure compression ignition engine. A similar baseline engine was also prepared, and preliminary testing was done. Even though the fabrication of the single cylinder prototype was behind schedule due to machine shop delays, the fundamental soundness of the design elements are proven, and the engine has successfully functioned. However, the testing approach of the two engines, as envisioned by the original proposal, proved impossible due to torsional vibration resonance caused by the single active piston. A new approach for proper testing has been proposed,

  2. Progress in passive solar energy systems. Volume 8. Part 1

    SciTech Connect (OSTI)

    Hayes, J.; Andrejko, D.A.

    1983-01-01

    This book presents the papers given at a conference sponsored by the US DOE, the Solar Energy Research Institute, SolarVision, Inc., and the Southern California Solar Energy Society. The topics considered at the conference included sizing solar energy systems for agricultural applications, a farm scale ethanol production plant, the EEC wind energy RandD program, the passive solar performance assessment of an earth-sheltered house, the ARCO 1 MW photovoltaic power plant, the performance of a dendritic web photovoltaic module, second generation point focused concentrators, linear fresnel lens concentrating photovoltaic collectors, photovoltaic conversion efficiency, amorphous silicon thin film solar cells, a photovoltaic system for a shopping center, photovoltaic power generation for the utility industry, spectral solar radiation, and the analysis of insolation data.

  3. LED Lighting in a Performing Arts Building at the University of Florida

    SciTech Connect (OSTI)

    Miller, Naomi J.; Kaye, Stan; Coleman, Patricia; Wilkerson, Andrea M.; Perrin, Tess E.; Sullivan, Gregory P.

    2014-07-01

    The U.S. DOE GATEWAY Demonstration Program supports demonstrations of high-performance solid-state lighting (SSL) products in order to develop empirical data and experience with the in-the-field applications of this advanced lighting technology. This report describes the process and results of the 2013 - 2014 GATEWAY demonstration of SSL technology in the Nadine McGuire Theatre and Dance Pavilion at the University of Florida, Gainesville, FL. The LED solutions combined with dimming controls utilized in four interior spaces - the Acting Studio, Dance Studio, Scene Shop, and Dressing Room - received high marks from instructors, students/performers, and reduced energy use in all cases. The report discusses in depth and detail of each project area including specifications, energy savings, and user observations. The report concludes with lessons learned during the demonstration.

  4. 2012 - 09 | Jefferson Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    September 2012 Wed, 09/26/2012 - 3:00pm JLab Computing: Microsoft Windows Patch Scheduled for Tonight Wed, 09/26/2012 - 3:00pm Machine Shop Work Requests Wed, 09/26/2012 - 3:00pm 2012 Vacation Donation Open Enrollment Wed, 09/26/2012 - 3:00pm Annual United Way Campaign Wed, 09/19/2012 - 3:00pm Don't Use Internet Explorer Unless Necessary: Malware Found Wed, 09/19/2012 - 3:00pm Change in JLab Pay Dates Wed, 09/19/2012 - 3:00pm Performance Appraisal Process Begins 9/25/2012 Wed, 09/12/2012 -

  5. Landlord project multi-year program plan, fiscal year 1999, WBS 1.5

    SciTech Connect (OSTI)

    Dallas, M.D.

    1998-09-22

    The MYWP technical baseline describes the work to be accomplished by the Project and the technical standards which govern that work. The mission of Landlord Project is to provide more maintenance replacement of general infrastructure facilities and systems to facilitate the Hanford Site cleanup mission. Also, once an infrastructure facility or system is no longer needed the Landlord Project transitions the facility to final closure/removal through excess, salvage or demolition. Landlord Project activities will be performed in an environmentally sound, safe, economical, prudent, and reliable manner. The Landlord Project consists of the following facilities systems: steam, water, liquid sanitary waste, electrical distribution, telecommunication, sanitary landfill, emergency services, general purpose offices, general purpose shops, general purpose warehouses, environmental supports facilities, roads, railroad, and the site land. The objectives for general infrastructure support are reflected in two specific areas, (1) Core Infrastructure Maintenance, and (2) Infrastructure Risk Mitigation.

  6. Business Case Analysis of Prototype Fabrication Division Recapitalization PlanSummary

    SciTech Connect (OSTI)

    Booth, Steven Richard; Benson, Faith Ann; Dinehart, Timothy Grant

    2015-04-30

    Business case studies were completed to support procurement of new machines and capital equipment in the Prototype Fabrication (PF) Division SM-39 and TA-03-0102 machine shops. Economic analysis was conducted for replacing the Mazak 30Y Mill-Turn Machine in SM-39, the Haas Vertical CNC Mill in Building 102, and the Hardinge Q10/65-SP Lathe in SM-39. Analysis was also conducted for adding a NanoTech Lathe in Building 102 and a new electrical discharge machine (EDM) in SM-39 to augment current capabilities. To determine the value of switching machinery, a baseline scenario was compared with a future scenario where new machinery was purchased and installed. Costs and benefits were defined via interviews with subject matter experts.

  7. Solarnorth '81 by Tymura Solardesigns: diverse residential, commercial and industrial projects at and above the 48th parallel in Ontario, Canada

    SciTech Connect (OSTI)

    Tymura, E.J.

    1981-01-01

    Solar Energy Heating Applications are On the Rise in and above the Northwestern City of Thunder Bay, on the northern shore of Lake Superior. Unique in their diversifications, the architectural commissions range from pure passive residential design thru hybrid systems; residential Greenhouse-Solarium active swimming pool and commercial hotel pool to inexpensive hybrid system for Canada's First Commercial Solar Lumber Drying Kiln; as well as combined earth sheltered with solar system design for a dormitory complex and shopping center. By May 1981, 7 buildings designed by Tymura Solardesigns in the Thunder Bay area will have been subjected to the Extreme Canadian climate (10,500/sup 0/F degree days, yearly temperature maximums from -41/sup 0/F to 90/sup 0/F, and solar fractions vary from 50% to 75%, with economic payback periods ranging between 7 and 10 years.

  8. QER- Comment of Tremolux

    Broader source: Energy.gov [DOE]

    Dear Sirs, Despite what might have been your best intentions, your 2013 report on Low-E storm windows is Worthless! All of the careful calculations and measurements are Worthless if the actual price of low-E storms is 4X what you claim! Given that a high-quality low-E storm window costs over $220 each, including installation, the payback period is Absurd! Who the hell is responsible for this Bullshit? Go shopping for low-E storms ... we Dare You! You might find some very cheap, plain grey, aluminum units ... but even those will be 3X the price that you claim. Don't you understand what we're saying? Your entire Cost/Benefit analysis is a FRAUD! Time to wake up! Tremolux

  9. Population exposure dose reconstruction for the Urals Region

    SciTech Connect (OSTI)

    Degteva, M.O.; Kozheurov, V.P.; Vorobiova, M.I.; Burmistrov, D.S.; Khokhryakov, V.V.; Suslova, K.G.; Anspaugh, L.R.; Napier, B.A.; Bouville, A.

    1996-06-01

    This presentation describes the first preliminary results of an ongoing joint Russian-US pilot feasibility study. Many people participated in workshops to determine what Russian and United States scientists could do together in the area of dose reconstruction in the Urals population. Most of the results presented here came from a joint work shop in St. Petersburg, Russia (11-13 July 1995). The Russians at the workshop represented the Urals Research Center for Radiation Medicine (URCRM), the Mayak Industrial Association, and Branch One of the Moscow Biophysics Institute. The US Collaborators were Dr. Anspaugh of LLNL, Dr. Nippier of PNL, and Dr. Bouville of the National Cancer Institute. The objective of the first year of collaboration was to look at the source term and levels of radiation contamination, the historical data available, and the results of previous work carried out by Russian scientists, and to determine a conceptual model for dose reconstruction.

  10. Nuclear component horizontal seismic restraint

    DOE Patents [OSTI]

    Snyder, Glenn J. (Lynchburg, VA)

    1988-01-01

    A nuclear component horizontal seismic restraint. Small gaps limit horizontal displacement of components during a seismic occurrence and therefore reduce dynamic loadings on the free lower end. The reactor vessel and reactor guard vessel use thicker section roll-forged rings welded between the vessel straight shell sections and the bottom hemispherical head sections. The inside of the reactor guard vessel ring forging contains local vertical dovetail slots and upper ledge pockets to mount and retain field fitted and installed blocks. As an option, the horizontal displacement of the reactor vessel core support cone can be limited by including shop fitted/installed local blocks in opposing alignment with the reactor vessel forged ring. Beams embedded in the wall of the reactor building protrude into apertures in the thermal insulation shell adjacent the reactor guard vessel ring and have motion limit blocks attached thereto to provide to a predetermined clearance between the blocks and reactor guard vessel ring.

  11. Physics, Computer Science and Mathematics Division. Annual report, 1 January-31 December 1979

    SciTech Connect (OSTI)

    Lepore, J.V.

    1980-09-01

    This annual report describes the research work carried out by the Physics, Computer Science and Mathematics Division during 1979. The major research effort of the Division remained High Energy Particle Physics with emphasis on preparing for experiments to be carried out at PEP. The largest effort in this field was for development and construction of the Time Projection Chamber, a powerful new particle detector. This work took a large fraction of the effort of the physics staff of the Division together with the equivalent of more than a hundred staff members in the Engineering Departments and shops. Research in the Computer Science and Mathematics Department of the Division (CSAM) has been rapidly expanding during the last few years. Cross fertilization of ideas and talents resulting from the diversity of effort in the Physics, Computer Science and Mathematics Division contributed to the software design for the Time Projection Chamber, made by the Computer Science and Applied Mathematics Department.

  12. John Day Fish Passage and Screening; 2003 Annual Report.

    SciTech Connect (OSTI)

    Allen, Steve

    2004-02-01

    The primary goal of the Oregon Screens Project was to implement 20 replacement screens projects in the John Day sub-basin and any projects identified in the Umatilla and Walla Walla sub-basins. A secondary goal is to complete a passage project, if one is identified, in any of the above sub-basins. Mid-Columbia ESU listed steelhead and USF&W listed bull trout inhabit these sub-basins and are present at most locations, along with a variety of resident fish species. We also provide assistance to our Enterprise Screen Shop, in the Grande Ronde/Imnaha sub-basins, if needed. All projects were designed and implemented under current National Marine Fisheries Service screening and passage criteria.

  13. Superfund Record of Decision (EPA Region 2): Forest Glen Subdivision, Niagara Falls, NY. (First remedial action), December 1989

    SciTech Connect (OSTI)

    Not Available

    1989-12-29

    The Forest Glen Subdivision site consists of 21 acres of developed residential properties and undeveloped land in Niagara Fall, Niagara County, New York. Land in the area surrounding the Forest Glen subdivision is used for residential and industrial purposes, including a mobile home park, small shopping mall, and the CECOS Landfill. Chemical companies reportedly disposed of wastes onsite from the early 1950s to the early 1970s. Sampling by EPA's Field Investigation Team revealed the presence of high concentrations of unknown and tentatively identified compounds (TICs) in August 1987, and further soil sampling was conducted to identify the TICs. EPA has executed interim measures to stabilize site conditions including collecting, staging, and securing drums in areas north and east of the subdivision and temporarily covering visibily contaminated soil with concrete. The remedial activity is the first of two planned operable units and addresses resident relocation only. A subsequent operable unit will address the remediation of site contamination once the relocation is complete.

  14. Heat powered refrigeration compressor. Semi-annual technical report

    SciTech Connect (OSTI)

    Goad, R.R.

    1981-01-01

    The objective of this program is to develop and improve the design of previously started prototypes of the Heat Powered Refrigeration Compressor. To build this prototype and ready it for testing by the University of Evansville is another goal. This prototype will be of similar capacity as the compressor that will eventually be commercially produced. This unit can operate on almost any moderate temperature water heat source. This heat source could include such applications as industrial waste heat, solar, wood burning stove, resistance electrical heat produced by a windmill, or even perhaps heat put out by the condenser of another refrigeration system. Work performed in the past four months has consisted of: engineering of HX-1; comparisons of specifications from different companies to ensure state of the art applications of parts for project; coordinating project requirements with machine shop; designing condenser; and partial assembly of HX-1.

  15. End to deficit of LPG. [Argentina

    SciTech Connect (OSTI)

    Andrich, V.

    1980-03-01

    In the Buenos Aires province of Argentina, Gas de Estado is constructing the future heart of the petrochemical complex, Bahia Blanca. The complex contains 2 absorption-refrigeration plants, a gas compressing plant, equipment maintenance shops and an important operations base for the Argentine truck gas pipelines. This will be the largest LPG plant in Latin America. The General Cerri plant, under construction, is located in an area of 40,000 sq m with new installations to extract ethane and higher hydrocarbons. The design optimizes the extraction of hydrocarbons from the natural gas and recovers 76% of the ethane. Selection of the process resulted from an investigation that compared the system with processes that use water cooling and absorption with refrigerated oil.

  16. Low temperature type new TMCP steel plate for LPG carriers

    SciTech Connect (OSTI)

    Suzuki, Shuichi; Bessyo, Kiyoshi; Arimochi, Kazushige; Yajima, Hiroshi; Tada, Masuo; Sakai, Daisuke

    1994-12-31

    New Thermo-Mechanical Control Process (TMCP) steel plate for LPG carriers of completely liquefied type was developed with non-nickel chemistry. The new steel plate has a capability to arrest a long running brittle crack at {minus}46 C (which is the design temperature of the liquefied LPG tanks). A high heat-input one-pass welding can be applied to this steel despite its nickel-less chemistry. These capabilities were enabled by microalloying technology with low aluminum-medium nitrogen-boron, as well as by the advanced Thermo-Mechanical Control Process. This paper describes the new concept of utilizing the trace elements and the evaluation test results as the steel plate for the LPG tank and hull, especially from the standpoints of the fracture safe reliability at high heat input welding and from that of the shop workability.

  17. Retrospective beryllium exposure assessment at the Rocky Flats Environmental Technology site

    SciTech Connect (OSTI)

    Barnard, A.E.; Torma-Krajewski, J.; Viet, S.M.

    1997-05-01

    Since the 1960`s, beryllium machining was performed to make nuclear weapon components at the Department of Energy (DOE) Rocky Flats Plant. Beryllium exposure was assessed via fixed airhead (FAH) sampling in which the filter cassette was affixed to the machine, generally within a few feet of the worker`s breathing zone. Approximately 500,000 FAH samples were collected for beryllium over three decades. From 1984 to 1987, personal breathing zone (PBZ) samples were also collected as part of the evaluation of a new high velocity/low volume local exhaust ventilation (HV/LV LEV) system. The purpose of this study was to determine how the two types of sampling data could be used for an exposure assessment in the beryllium shop.

  18. J,.

    Office of Legacy Management (LM)

    !F .' J,. ,..", .Y/, + . > ,, ?lv., , _ ,I, i A L B A N Y R E S E A R G H C E N T E R F. E . B L O C K , R E S E A R C H D I R E C T O R F O R OFFICIAL U S E 4+--k B 'B L x ? f J ,;' 1 "6 6 kLz2 f--"'7 r a .r7 y--r, /-'"r ! f5 y/ \cJ"( "d:"ij 1 ;g t 1; 1 / ,:' . XI_, b . _ _ i I ADMINISTRATION 2 EDUCATION 6 TRbtINING. --.. .- _~ ~~ TRAINING CENTER 3 MOLD SHOP 4 MELTING LABORATORY -z ~ _.* ,z. .,.... I... ,-.i*.",. ..I . . . _.' OMEN AVENUE 5 MACHINE

  19. Application of Printed Circuit Board Technology to FT-ICR MS Analyzer Cell Construction and Prototyping

    SciTech Connect (OSTI)

    Leach, Franklin E.; Norheim, Randolph V.; Anderson, Gordon A.; Pasa-Tolic, Ljiljana

    2014-12-01

    Although Fourier transform ion cyclotron resonance mass spectrometry (FT-ICRMS) remains themass spectrometry platform that provides the highest levels of performance for mass accuracy and resolving power, there is room for improvement in analyzer cell design as the ideal quadrupolar trapping potential has yet to be generated for a broadband MS experiment. To this end, analyzer cell designs have improved since the field’s inception, yet few research groups participate in this area because of the high cost of instrumentation efforts. As a step towards reducing this barrier to participation and allowing for more designs to be physically tested, we introduce a method of FT-ICR analyzer cell prototyping utilizing printed circuit boards at modest vacuum conditions. This method allows for inexpensive devices to be readily fabricated and tested over short intervals and should open the field to laboratories lacking or unable to access high performance machine shop facilities because of the required financial investment.

  20. Observed Minimum Illuminance Threshold for Night Market Vendors in Kenya who use LED Lamps

    SciTech Connect (OSTI)

    Johnstone, Peter; Jacobson, Arne; Mills, Evan; Radecsky, Kristen

    2009-03-21

    Creation of light for work, socializing, and general illumination is a fundamental application of technology around the world. For those who lack access to electricity, an emerging and diverse range of LED based lighting products hold promise for replacing and/or augmenting their current fuel-based lighting sources that are costly and dirty. Along with analysis of environmental factors, economic models for total cost-ofownership of LED lighting products are an important tool for studying the impacts of these products as they emerge in markets of developing countries. One important metric in those models is the minimum illuminance demanded by end-users for a given task before recharging the lamp or replacing batteries. It impacts the lighting service cost per unit time if charging is done with purchased electricity, batteries, or charging services. The concept is illustrated in figure 1: LED lighting products are generally brightest immediately after the battery is charged or replaced and the illuminance degrades as the battery is discharged. When a minimum threshold level of illuminance is reached, the operational time for the battery charge cycle is over. The cost to recharge depends on the method utilized; these include charging at a shop at a fixed price per charge, charging on personal grid connections, using solar chargers, and purchasing dry cell batteries. This Research Note reports on the observed"charge-triggering" illuminance level threshold for night market vendors who use LED lighting products to provide general and task oriented illumination. All the study participants charged with AC power, either at a fixed-price charge shop or with electricity at their home.

  1. Warehouse Plan for the Multi Canister Overpack (MC0) and Baskets

    SciTech Connect (OSTI)

    MARTIN, M.K.

    2000-03-27

    The Multi-Canister Overpacks (MCO) will contain spent nuclear fuel (SNF) removed from the K East and West Basins. The SNF will be placed in fuel storage baskets that will be stacked inside the MCOs. Approximately 400 MCOs and 21 70 baskets will be fabricated for this purpose. These MCOs, loaded with SNF, will be placed in interim storage in the Canister Storage Building (CSB) located in the 200 Area of the Hanford Site. The MCOs consist of different components/sub-assemblies that will be manufactured by one or more vendors. All component/sub-assemblies will be shipped to the Hanford Site Central Stores Warehouse, 2355 Stevens Drive, Building 1163 in the 1100 Area, for inspection and storage until these components are required at the CSB and K Basins. The MCO fuel storage baskets will be manufactured in the MCO basket fabrication shop located in Building 328 of the Hanford Site 300 Area. The MCO baskets will be inspected at the fabrication shop before shipment to the Central Stores Warehouse for storage. The MCO components and baskets will be stored as received from the manufacturer with specified protective coatings, wrappings, and packaging intact to maintain mechanical integrity of the components and to prevent corrosion. The components and baskets will be shipped as needed from the warehouse to the CSB and K Basins. This warehouse plan includes the requirements for receipt of MCO components and baskets from the manufacturers and storage at the Hanford Site Central Stores Warehouse. Transportation of the MCO components and baskets from the warehouse, unwrapping, and assembly of the MCOs are the responsibility of SNF Operations and are not included in this plan.

  2. Radioactivity and health: A history

    SciTech Connect (OSTI)

    Stannard, J.N.; Baalman, R.W. Jr.

    1988-10-01

    This book is designed to be primarily a history of research facts, measurements, and ideas and the people who developed them. ''Research'' is defined very broadly to include from bench-top laboratory experiments to worldwide environmental investigations. The book is not a monograph or a critical review. The findings and conclusions are presented largely as the investigators saw and reported them. Frequently, the discussion utilizes the terminology and units of the time, unless they are truly antiquated or potentially unclear. It is only when the work being reported is markedly iconoclastic or obviously wrong that I chose to make special note of it or to correct it. Nevertheless, except for direct quotations, the language is mine, and I take full responsibility for it. The working materials for this volume included published papers in scientific journals, books, published conferences and symposia, personal interviews with over 100 individuals, some of them more than once (see Appendix A), and particularly for the 1940--1950 decade and for the large government-supported laboratories to the present day, ''in-house'' reports. These reports frequently represent the only comprehensive archive of what was done and why. Unfortunately, this source is drying up because of storage problems and must be retrieved by ever more complex and inconvenient means. For this reason, special efforts have been taken to review and document these sources, though even now some sections of the field are partially inaccessible. Nevertheless, the volume of all materials available for this review was surprisingly large and the quality much better than might have been expected for so complex and disparate a fields approached under conditions of considerable urgency.

  3. Unusual Application Of Ion Beam Analysis For The Study Of Surface Layers On Materials Relevant To Cultural Heritage

    SciTech Connect (OSTI)

    Mathis, F.; Salomon, J.; Aucouturier, M.; Trocellier, P.

    2006-12-01

    Recently a new thematic of research -- intentional patinas on antic copper-base objects -- lead the AGLAE (Accelerateur Grand Louvre pour l'Analyse Elementaire) team of the C2RMF (Centre de Recherche et de Restauration des Musees de France) to improve its methods of analyzing thin surface layers both in their elemental composition and in-depth elemental distribution. A new beam extraction set-up containing a particle detector has been developed in order to use a 6 MeV alpha beam both in PIXE and RBS mode and to monitor precisely the ion dose received by the sample. Both RBS and ionization cross sections were assessed in order to make sure that the analysis can be quantitative. This set up allows great progresses in the understanding of both nature and structure of this very particular oxide layer obtained in the antiquity by chemical treatment on copper alloys, containing gold and/or silver and presenting very interesting properties of color and stability.Besides the non destructive properties of the IBA in external beam mode, this method of analyzing allows the study of samples in interaction with its environment. This was used to study the high temperature oxidation of Cu-Sn alloys using a furnace developed in order to heat a sample and analyze it in RBS mode at the same time. This new way of studying the growth of oxide layers permits to understand the oxidation mechanism of this system and to propose an experimental model for the identification of oxide layers due to an exposition to a high temperature, model needed for a long time by curators in charge of the study and the conservation of archaeological bronzes.

  4. Advanced cogeneration and absorption chillers potential for service to Navy bases. Final report

    SciTech Connect (OSTI)

    Andrews, J.W.; Butcher, T.A.; Leigh, R.W.; McDonald, R.J.; Pierce, B.L.

    1996-04-01

    The US military uses millions of Btu`s of thermal energy to heat, cool and deliver process thermal energy to buildings on military bases, much of which is transmitted through a pipeline system incorporating thousands of miles of pipe. Much of this pipeline system is in disrepair and is nearing the end of its useful life, and the boilers which supply it are old and often inefficient. In 1993, Brookhaven National Laboratory (BNL) proposed to SERDP a three-year effort to develop advanced systems of coupled diesel cogenerators and absorption chillers which would be particularly useful in providing a continuation of the services now provided by increasingly antiquated district systems. In mid-February, 1995, BNL learned that all subsequent funding for our program had been canceled. BNL staff continued to develop the Program Plan and to adhere to the requirements of the Execution Plan, but began to look for ways in which the work could be made relevant to Navy and DoD energy needs even without the extensive development plan formerly envisioned. The entire program was therefore re-oriented to look for ways in which small scale cogeneration and absorption chilling technologies, available through procurement rather than development, could provide some solutions to the problem of deteriorated district heating systems. The result is, we believe, a striking new approach to the provision of building services on military bases: in many cases, serious study should be made of the possibility that the old district heating system should be removed or abandoned, and small-scale cogenerators and absorption chillers should be installed in each building. In the remainder of this Summary, we develop the rationale behind this concept and summarize our findings concerning the conditions under which this course of action would be advisable and the economic benefits which will accrue if it is followed. The details are developed in the succeeding sections of the report.

  5. Implementation of Army privatization directives at Forscom installations

    SciTech Connect (OSTI)

    Armstrong, R.C.; Patwardhan, S.

    1997-06-01

    {open_quotes}Privatization{close_quotes} has become the buzzword of the 1990s not only here in the United States but throughout the world. Privatization has been traditionally defined as the sale/transfer of state-owned (i.e. federal, state, county, city or public) assets to the private sector. Although there are numerous reasons for the privatization of state-owned assets, the primary reasons include the generation of a significant amount of cash to the state (Great Britain`s sale of electric power industry); capitalization of the formerly state-owned utility (sale of the utilities within many countries of the former Soviet Union); and state policy goals of eliminating monopolies, encouraging competition, and restructuring (Chile). Several year ago, the Department of Defense (DoD) and specifically the Department of Army (DoA) initiated its own `Privatization Process`. Coupled with shrinking budgets, workforce and funding resources from the Government, the Army was faced with antiquated utility infrastructure in need of significant upgrades and in some cases total replacements. Recognizing that the provision of utility services was not a core mission of the Army, DoA has encouraged its Installations throughout the country to consider the privatization of the Government-owned utility systems. In compliance with DoA policy, Forces Command (FORSCOM) has been at the forefront of the privatization process. To date, FORSCOM has initiated the process of analyzing the potential privatization of over 30 utility systems at 12 FORSCOM Installations located throughout the country. The FORSCOM Installations include Fort Irwin, CA; Fort Campbell, KY; Fort Bragg, NC; Fort McPherson, GA; Fort Hood, TX; Fort Polk, LA; Fort Lewis, WA; Fort Riley, KS; Fort Stewart, GA; Hunter Army Airfield, GA; Fort Carson, CO; Fort Devens, MA; Fort Dix, NJ; and Fort Gillem, GA.

  6. 10 CFR 830 Major Modification Determination for Emergency Firewater Injection System Replacement

    SciTech Connect (OSTI)

    Noel Duckwitz

    2011-05-01

    The continued safe and reliable operation of the ATR is critical to the Department of Energy (DOE) Office of Nuclear Energy (NE) mission. While ATR is safely fulfilling current mission requirements, a variety of aging and obsolescence issues challenge ATR engineering and maintenance personnel’s capability to sustain ATR over the long term. First documented in a series of independent assessments, beginning with an OA Environmental Safety and Health Assessment conducted in 2003, the issues were validated in a detailed Material Condition Assessment (MCA) conducted as a part of the ATR Life Extension Program in 2007.Accordingly, near term replacement of aging and obsolescent original ATR equipment has become important to ensure ATR capability in support of NE’s long term national missions. To that end, a mission needs statement has been prepared for a non-major system acquisition which is comprised of three interdependent sub-projects. The first project will replace the existent diesel-electrical bus (E-3), switchgear, and the fifty year old antiquated marine diesels with commercial power that is backed with safety-related emergency diesel generators (EDGs), switchgear, and uninterruptible power supply. The second project will replace the four, obsolete, original primary coolant pumps and motors. The third project, the subject of this major modification determination, will replace the current emergency firewater injection system (EFIS). The replacement water injection system will function as the primary emergency water injection system with the EFIS being retained as a defense-in-depth backup. Completion of this and the two other age-related projects (replacement of the ATR diesel bus (E-3) and switchgear and replacement of the existent aged primary coolant pumps and motors) will resolve major age-related operational issues plus make a significant contribution in sustaining the ATR safety and reliability profile. The major modification criteria evaluation of the project pre-conceptual design identified several issues that lead to the conclusion that the project is a major modification.

  7. Changes to TSR control set due to changes in mission and lessons learned

    SciTech Connect (OSTI)

    Foppe, T.L.; Olinger, S.J.

    1999-06-01

    Previous Technical Safety Requirements (TSRs) established to support plutonium production activities at the Rocky Flats Environmental Technology Site (RFETS) were heavily focused on engineered safety features that would mitigate potential accidents. With the change in mission in 1992 to Site closure, and considering antiquated equipment nearing the end of their useful life, a change in philosophy was adopted to emphasize preventive controls that are mostly administrative. The new Administrative Controls (ACs) developed in the last few years include discrete attributes of safety management programs (SMPs) that are specifically credited to prevent or mitigate an accident, and include requirements on handling individual deviations, programmatic deficiencies, and TSR AC violations. The primary benefit of these changes is fewer requirements on equipment that allow the contractor more flexibility to maintain the defense-in-depth safety systems in a more cost-effective manner. A disadvantage of these new ACs is that implementation has become cumbersome and difficult to manage, e.g., resulted in an increased burden of demonstrating compliance and required an additional infrastructure to track deviations and deficiencies. In order to improve the efficiency of the authorization basis (AB) process to support accelerated Site closure according to the 2006 Plan, the Site has recently modified the ABs to better focus on the programmatic elements that were credited in the accident analyses, and to rely on the Integrated Safety Management System to implement SMPs via one general TSR AC requirement. At the request of DOE/RFFO, a self-assessment of the Rocky Flats AB program was performed in November 1998 by Victor Stello, DOE Headquarters, along with representatives from other DOE sites and Defense Programs. Results of this self-assessment confirmed that the proposed AC changes would be beneficial and provided specific recommendations.

  8. AN ADVANCED TOOL FOR APPLIED INTEGRATED SAFETY MANAGEMENT

    SciTech Connect (OSTI)

    Potts, T. Todd; Hylko, James M.; Douglas, Terence A.

    2003-02-27

    WESKEM, LLC's Environmental, Safety and Health (ES&H) Department had previously assessed that a lack of consistency, poor communication and using antiquated communication tools could result in varying operating practices, as well as a failure to capture and disseminate appropriate Integrated Safety Management (ISM) information. To address these issues, the ES&H Department established an Activity Hazard Review (AHR)/Activity Hazard Analysis (AHA) process for systematically identifying, assessing, and controlling hazards associated with project work activities during work planning and execution. Depending on the scope of a project, information from field walkdowns and table-top meetings are collected on an AHR form. The AHA then documents the potential failure and consequence scenarios for a particular hazard. Also, the AHA recommends whether the type of mitigation appears appropriate or whether additional controls should be implemented. Since the application is web based, the information is captured into a single system and organized according to the >200 work activities already recorded in the database. Using the streamlined AHA method improved cycle time from over four hours to an average of one hour, allowing more time to analyze unique hazards and develop appropriate controls. Also, the enhanced configuration control created a readily available AHA library to research and utilize along with standardizing hazard analysis and control selection across four separate work sites located in Kentucky and Tennessee. The AHR/AHA system provides an applied example of how the ISM concept evolved into a standardized field-deployed tool yielding considerable efficiency gains in project planning and resource utilization. Employee safety is preserved through detailed planning that now requires only a portion of the time previously necessary. The available resources can then be applied to implementing appropriate engineering, administrative and personal protective equipment controls in the field.

  9. Understanding the cost of power interruptions to U.S. electricity consumers

    SciTech Connect (OSTI)

    LaCommare, Kristina Hamachi; Eto, Joseph H.

    2004-09-01

    The massive electric power blackout in the northeastern United States and Canada on August 14-15, 2003 resulted in the U.S. electricity system being called ''antiquated'' and catalyzed discussions about modernizing the grid. Industry sources suggested that investments of $50 to $100 billion would be needed. This report seeks to quantify an important piece of information that has been missing from these discussions: how much do power interruptions and fluctuations in power quality (power-quality events) cost U.S. electricity consumers? Accurately estimating this cost will help assess the potential benefits of investments in improving the reliability of the grid. We develop a comprehensive end-use framework for assessing the cost to U.S. electricity consumers of power interruptions and power-quality events (referred to collectively as ''reliability events''). The framework expresses these costs as a function of: (1) Number of customers by type in a region; (2) Frequency and type of reliability events experienced annually (including both power interruptions and power-quality events) by these customers; (3) Cost of reliability events; and (4) Vulnerability of customers to these events. The framework is designed so that its cost estimate can be improved as additional data become available. Using our framework, we estimate that the national cost of power interruptions is about $80 billion annually, based on the best information available in the public domain. However, there are large gaps in and significant uncertainties about the information currently available. Notably, we were not able to develop an estimate of power-quality events. Sensitivity analysis of some of these uncertainties suggests that the total annual cost could range from less than $30 billion to more than $130 billion. Because of this large range and the enormous cost of the decisions that may be based on this estimate, we encourage policy makers, regulators, and industry to jointly under take the comparatively modest-cost improvements needed in the information used to estimate the cost of reliability events. Specific areas for improvement include: coordinated, nationwide collection of updated information on the cost of reliability events; consistent definition and recording of the duration and frequency of reliability events, including power-quality events; and improved information on the costs of and efforts by consumers to reduce their vulnerability to reliability events.

  10. 'Green-in-Three' IT Solutions Protecting Workers and the Environment - 12526

    SciTech Connect (OSTI)

    Eckman, Todd [MSA Hanford, Richland, Washington 99354 (United States)

    2012-07-01

    The U.S. Department of Energy (DOE), Environmental Management (EM), DOE Richland Operations Office (RL), Mission Support Alliance (MSA), and Lockheed Martin Services, Inc. (LMSI), Information Technology partnered in an effort to reduce environmental impacts, energy use, and operating costs and improve worker safety through consolidation, centralization, and standardization of Information Technology (IT) assets on the Hanford Site. Green-in-Three is an IT Value strategy, which is moving Hanford from an inefficient, antiquated 20. Century IT architecture to a smart, green, flexible 21. Century IT architecture that delivers information anywhere at any time to Hanford Mission partners. The 'Green-in-three' efforts to date have had a significant impact on meeting and exceeding the overall IT Value Strategy to decrease IT maintenance and delivery costs and move Hanford into a smart, green, and flexible 21. Century IT architecture. Some of the results and impacts are as follows: - Thirteen data centers were reduced to two, freeing up approximately 279 m{sup 2} (3000 ft{sup 2})) of space; - Reduced data center energy use 50%, from 120,000 to 60,000 kW; - Excessed 9 metric tons (10 tons) of server equipment; - Removed and properly disposed of 2871 kg (6,300 lb) lead acid batteries; - Projects saved over $1 M in fiber and copper cable installation through 2011; - Developed or improved partnerships with local, state, and federal agencies, Tribes, and Site contractors; - Increased wireless coverage for improved access to remote areas. Moving forward to 2012, the impact of these accomplishments will be realized in the years to come. IT services will be delivered in days instead of months. Field personnel will have access to information at the point of performance, reducing travel time. Remote monitoring, telemetry, and/or video can be conducted using the wireless network; reducing travel time for field inspections. Emergency personnel have access to critical information at the incident site, saving valuable time. Full deployment of the VoIP technologies will reduce power use by 1,000,000 kWh/yr for telecommunications equipment, driving home the IT Value Strategy of Green-in-Three. (author)

  11. Environmental Field Surveys, EMF Rapid Program, Engineering Project No.3

    SciTech Connect (OSTI)

    Enertech Consultants

    1996-04-01

    The EMF Research and Public Information Dissemination Program (RAPID) includes several engineering research in the area of exposure assessment and source characterization. RAPID engineering project No. 3: ''Environmental Field Surveys'' was performed to obtain information on the levels and characteristics of different environments, for which only limited data were available, especially in comparison to magnetic field data for the residential environment and for electric utility facilities, such as power lines and substations. This project was also to provide information on the contribution of various field sources in the surveyed environments. Magnetic field surveys were performed at four sites for each of five environments: schools, hospitals, office buildings, machine shops, and grocery stores. Of the twenty sites surveyed, 11 were located in the San Francisco Bay Area and 9 in Massachusetts. The surveys used a protocol based on magnetic field measurements and observation of activity patterns, designed to provide estimates of magnetic field exposure by type of people and by type of sources. The magnetic field surveys conducted by this project produced a large amount of data which will form a part of the EMF measurement database Field and exposure data were obtained separately for ''area exposure'' and ''at exposure points''. An exposure point is a location where persons engage in fixed, site specific activities near a local source that creates a significant increase in the area field. The area field is produced by ''area sources'', whose location and field distribution is in general not related to the location of the people in the area.

  12. From comfort to kilowatts: An integrated assessment of electricity conservation in Thailand's commercial sector

    SciTech Connect (OSTI)

    Busch, J.F. Jr.

    1990-08-01

    Thailand serves as a case study of the potential to conserve electricity in the fast-growing commercial sectors of the tropical developing world. We performed a field study of over 1100 Thai office workers in which a questionnaire survey and simultaneous physical measurements were taken. Both air-conditioned and non-air-conditioned buildings were included. We analyzed Thai subjective responses on the ASHRAE, McIntyre and other rating scales, relating them to Effective Temperature, demographics, and to rational indices of warmth such as PMV and TSENS. These results suggest that without sacrificing comfort, significant energy conservation opportunities exist through the relaxation of upper space temperature limits. To investigate the potential for conserving energy in a cost-effective manner, we performed a series of parametric simulations using the DOE-2.1D computer program on three commercial building prototypes based on actual buildings in Bangkok; an office, a hotel, and a shopping center. We investigated a wide range of energy conservation measures appropriate for each building type, from architectural measures to HVAC equipment and control solutions. The best measures applied in combination into high efficiency cases can generate energy savings in excess of 50%. Economic analyses performed for the high efficiency cases, resulted in costs of conserved energy of less than and internal rates of return in excess of 40%. Thermal cool storage, cogeneration, and gas cooling technology showed promise as cost-effective electric load management strategies.

  13. HISTORICAL AMERICAN ENGINEERING RECORD - IDAHO NATIONAL ENGINEERING AND ENVIRONMENTAL LABORATORY, TEST AREA NORTH, HAER NO. ID-33-E

    SciTech Connect (OSTI)

    Susan Stacy; Hollie K. Gilbert

    2005-02-01

    Test Area North (TAN) was a site of the Aircraft Nuclear Propulsion (ANP) Project of the U.S. Air Force and the Atomic Energy Commission. Its Cold War mission was to develop a turbojet bomber propelled by nuclear power. The project was part of an arms race. Test activities took place in five areas at TAN. The Assembly & Maintenance area was a shop and hot cell complex. Nuclear tests ran at the Initial Engine Test area. Low-power test reactors operated at a third cluster. The fourth area was for Administration. A Flight Engine Test facility (hangar) was built to house the anticipated nuclear-powered aircraft. Experiments between 1955-1961 proved that a nuclear reactor could power a jet engine, but President John F. Kennedy canceled the project in March 1961. ANP facilities were adapted for new reactor projects, the most important of which were Loss of Fluid Tests (LOFT), part of an international safety program for commercial power reactors. Other projects included NASA's Systems for Nuclear Auxiliary Power and storage of Three Mile Island meltdown debris. National missions for TAN in reactor research and safety research have expired; demolition of historic TAN buildings is underway.

  14. Single taphole blast furnace casthouse performance optimizing cost and availability

    SciTech Connect (OSTI)

    Fowles, R.D.; Searls, J.B.; Peay, W.R.; Brenneman, R.G.

    1995-12-01

    The No. 2 blast furnace is a single taphole furnace with a convection air-cooled iron trough. The iron runner system is designed to fill four 90 ton open-top ladles per cast, which are transported by locomotive to the steel shop. The slag runner system is capable of filling three 800 ft{sup 3} slag pots per cast. The No. 2 blast furnace was blown in from mini-reline with this new casthouse configuration in early December 1991. It was operated for nearly three years until it was banked for planned stove repairs and a trough rebuild in late September 1994. During this period, the furnace produced just over 2.5 million tons of hot metal across the original trough refractory lining system, with 13 intermediate hot patch castable repairs. The entire casthouse refractory usage (main trough, runner systems, and covers) during this campaign was 1.06 pounds per net ton of hot metal. Investigation of the lining during demolition indicated that the trough lining campaign could have been extended to at least 3.0 million tons. This paper will discuss how operating practices, mechanical design, refractory design, maintenance philosophy, and attention to detail synergistically contributed to the long campaign life and low refractory consumption rate.

  15. Use of coal in Z-BOP steelmaking technologies

    SciTech Connect (OSTI)

    Boutchenkov, A.; Oppelt, R.

    1994-12-31

    Z-BOP steelmaking technologies are a family of modifications to traditional Basic Oxygen Process (BOP) steelmaking. Z-BOP was developed and initially implemented at the West Siberian Steel Works (ZapSib), Russia. In 1992, the technology became available for commercialization and was successfully implemented at Bethlehem Steel, Bethlehem, Pennsylvania, and at ISCOR, Limited, Newcastle Works, Republic of South Africa. The family of Z-BOP technologies provides for greater flexibility in the type and quantity of the solid metallic charge to the BOP without costly expenditures for equipment. Z-BOP technologies achieve the results by effectively and expeditiously releasing and utilizing auxiliary heat in the steelmaking process. The selection of the Z-BOP modifications to be utilized is custom designed for each implementation. The selection criteria are driven by the objectives and limitation of each BOP shop. Some of the Z-BOP modifications utilize coal as a source of auxiliary heat. The coal additions can be anthracite or bituminous, or a combination of the two, depending upon the design. In order to be effective, the coal used must be within specified properties and be introduced into the process with specific control. The amount of coal addition is one method of providing for additional flexibility in the solid metallic charge and will vary according to the amount of auxiliary heat required. The amount of coal addition will also vary to accommodate fluctuations in the temperature and chemistry of the hot metal component of the charge.

  16. INTEGRATED SYSTEM TO CONTROL PRIMARY PM 2.5 FROM ELECTRIC POWER PLANTS

    SciTech Connect (OSTI)

    Unknown

    2001-01-01

    The fabrication drawings for the Advanced ElectroCore module and the water-cooled precharger were completed during this reporting period. The drawings were sent to four fabrication shops as part of a bid package. Of the three companies that chose to participate, the contract to fabricate the two components was awarded to Advanced Fabrication Services of Lemoyne, PA on 3 November 2000. Fabrication began the following week. The components are scheduled to be completed in mid to late January 2001. The design of the dry scrubber was delayed while the problem of low dew point spread in the exhaust stream was resolved. The temperature of the exhaust gas from the outlet of the existing ESP is only 260 F. Some of the sorbents to be tested are liquid and therefore, the amount of sorbent that can be added before the exhaust gas reaches the due point is limited. The solution was to use a combustor to burn LPG and mix the two exhaust streams to get the desired temperature. Calculations indicated that burning LPG at the rate of 500,000 Btu/hr would be sufficient to raise the gas temperature to 400 F.

  17. Evaluation of permanent die coatings to improve the wear resistance of die casting dies. Final project report, January 1, 1995--April 30, 1997

    SciTech Connect (OSTI)

    Shivpuri, R.

    1997-09-18

    Die Casting dies are subject to severe service conditions during the die casting operation. While these severe conditions are necessary to achieve high production rates, they cause the dies which are commonly made of H13 die steel, to suffer frequent failures. The major die failure mechanisms are erosion or washout, Heat checking, soldering and corrosion. Due to their geometrical complexity, die casting dies are very expensive (some dies cost over a million dollars), and thus a large number of parts have to be produced by a die, to justify this cost and leverage the advantages of the die casting process (high production rates, low manpower costs). A potential increase in the die service life, thus has a significant impact on the economics of the die; casting operation. There are many ways to extend die life: developing new wear resistant die materials, developing new surface treatments including coatings, improving heat treatment of existing H13 dies, using better lubricants that can protect the die material, or modifying the die geometry and process parameters to reduce the intensity of wear. Of these the use of coatings to improve the wear resistance of the die surface has shown a lot of promise. Consequently, use of coatings in the die casting industry and their wide use to decrease die wear can improve significantly the productivity of shop operations resulting in large savings in material and energy usage.

  18. Putting Carbon in its Place: What You Can Do (LBNL Science at the Theater)

    ScienceCinema (OSTI)

    Walker, Iain; Regnier, Cindy [LBNL, Environmental Energy Technologies Division

    2011-04-28

    Science at the Theater: Berkeley Lab scientists reveal the latest research on how to reduce your carbon footprint at home, work, and when you shop. Learn how even small choices can have a big impact. Iain Walker's research focuses on optimizing the energy use and comfort of buildings. He's a staff scientist in the Energy Performance of Buildings Group, which is part of Berkeley Lab's Environmen...tal Energy Technologies Division. He's also executive editor of Home Energy Magazine. Cindy Regnier is a Project Manager in the Environmental Energy Technologies Division at Berkeley Lab. She has over 13 years of mechanical engineering design experience, with a focus on low-energy buildings. Her projects have included several LEED Platinum buildings and the design of a 200,000 sf carbon neutral, net-zero energy science museum in San Francisco. Eric Masanet is Acting Deputy Leader of the International Energy Studies Group at Berkeley Lab. His research focuses on life-cycle assessments and energy efficiency analysis. He holds a joint research appointment in the Institute of Transportation Studies at UC Berkeley.

  19. Review of the Lujan neutron scattering center: basic energy sciences prereport February 2009

    SciTech Connect (OSTI)

    Hurd, Alan J; Rhyne, James J; Lewis, Paul S

    2009-01-01

    The Lujan Neutron Scattering Center (Lujan Center) at LANSCE is a designated National User Facility for neutron scattering and nuclear physics studies with pulsed beams of moderated neutrons (cold, thermal, and epithermal). As one of five experimental areas at the Los Alamos Neutron Science Center (LANSCE), the Lujan Center hosts engineers, scientists, and students from around the world. The Lujan Center consists of Experimental Room (ER) 1 (ERl) built by the Laboratory in 1977, ER2 built by the Office of Basic Energy Sciences (BES) in 1989, and the Office Building (622) also built by BES in 1989, along with a chem-bio lab, a shop, and other out-buildings. According to a 1996 Memorandum of Agreement (MOA) between the Defense Programs (DP) Office of the National Nuclear Security Agency (NNSA) and the Office of Science (SC, then the Office of Energy Research), the Lujan Center flight paths were transferred from DP to SC, including those in ERI. That MOA was updated in 2001. Under the MOA, NNSA-DP delivers neutron beam to the windows of the target crypt, outside of which BES becomes the 'landlord.' The leveraging nature of the Lujan Center on the LANSCE accelerator is a substantial annual leverage to the $11 M BES operating fund worth approximately $56 M operating cost of the linear accelerator (LINAC)-in beam delivery.

  20. Engineering task plan for five portable exhausters

    SciTech Connect (OSTI)

    Rensink, G.E.

    1997-10-01

    Exhausters will be employed to ventilate certain single-shell tanks (SSTs) during salt well pumping campaigns. Active ventilation is necessary to reduce the potential flammable gas inventory (LANL 1996a) in the dome space that may accumulate during steady-state conditions or during/after postulated episodic gas release events. The tanks described in this plan support the activities required to fabricate and test three 500 cfm portable exhausters in the 200 W area shops, and to procure, design, fabricate and test two 1000 cfm units. Appropriate Notice of Construction (NOC) radiological and toxic air pollutant permits will be obtained for the portable exhausters. The portable exhauster design media to be employed to support this task was previously developed for the 241-A-101 exhauster. The same design as A101 will be fabricated with only minor improvements to the design based upon operator input/lessons learned. The safety authorization basis for this program effort will follow SAD 36 (LANL 1996b), and each tank will be reviewed against this SAD for changes or updates. The 1000 cfm units will be designed by the selected offsite contractor according to the specification requirements in KHC-S-O490. The offsite units have been specified to utilize as many of the same components as the 500 cfm units to ensure a more cost effective operation and maintenance through the reduction of spare parts and additional procedures.

  1. Guidelines for Estimating Unmetered Landscaping Water Use

    SciTech Connect (OSTI)

    McMordie Stoughton, Kate

    2010-07-28

    The document lays-out step by step instructions to estimate landscaping water using two alternative approaches: evapotranspiration method and irrigation audit method. The evapotranspiration method option calculates the amount of water needed to maintain a healthy turf or landscaped area for a given location based on the amount of water transpired and evaporated from the plants. The evapotranspiration method offers a relatively easy one-stop-shop for Federal agencies to develop an initial estimate of annual landscape water use. The document presents annual irrigation factors for 36 cities across the U.S. that represents the gallons of irrigation required per square foot for distinct landscape types. By following the steps outlined in the document, the reader can choose a location that is a close match their location and landscape type to provide a rough estimate of annual irrigation needs without the need to research specific data on their site. The second option presented in the document is the irrigation audit method, which is the physical measurement of water applied to landscaped areas through irrigation equipment. Steps to perform an irrigation audit are outlined in the document, which follow the Recommended Audit Guidelines produced by the Irrigation Association.[5] An irrigation audit requires some knowledge on the specific procedures to accurately estimate how much water is being consumed by the irrigation equipment.

  2. Scenario of solid waste reuse in Khulna city of Bangladesh

    SciTech Connect (OSTI)

    Bari, Quazi H.; Mahbub Hassan, K.; Haque, R.

    2012-12-15

    The reuse and recycling of waste materials are now sincerely considered to be an integral part of solid waste management in many parts of the world. In this context, a vast number of options ranging from small scale decentralized to larger scale centralized plants have been adopted. This study aimed at investigating the waste reuse schemes in Khulna city located in the southern part of Bangladesh and ranked third largest city in the country. The shops for reusable material (SRM) were mostly situated around railway, waterway, and truck station markets which provided easy transportation to further locations. For the reuses of waste materials and products, a chain system was found to collect reusable wastes under a total number of 310 identified SRM with 859 persons directly or indirectly involved in the scheme. This was a decentralized waste management system with self sufficient (autonomous) management. According to mass balance, about 38.52 tons d{sup -1} solid wastes were reused in Khulna city area, accounting for 7.65% of the total generated wastes. This study revealed that apparently a silent, systematic, smooth, and clean reuse chain has been established in Khulna city area under private initiatives, whose sustainability was confirmed over the years in the country without any official or formal funds. However, proper adjustment between the higher and lower chain in the materials flow path, as well as personal hygiene training for the workers, would further improve the achievements of the established reuse scheme.

  3. Conceptual Design of a 100 MWe Modular Molten Salt Power Tower Plant

    SciTech Connect (OSTI)

    James E. Pacheco; Carter Moursund, Dale Rogers, David Wasyluk

    2011-09-20

    A conceptual design of a 100 MWe modular molten salt solar power tower plant has been developed which can provide capacity factors in the range of 35 to 75%. Compared to single tower plants, the modular design provides a higher degree of flexibility in achieving the desired customer's capacity factor and is obtained simply by adjusting the number of standard modules. Each module consists of a standard size heliostat field and receiver system, hence reengineering and associated unacceptable performance uncertainties due to scaling are eliminated. The modular approach with multiple towers also improves plant availability. Heliostat field components, receivers and towers are shop assembled allowing for high quality and minimal field assembly. A centralized thermal-storage system stores hot salt from the receivers, allowing nearly continuous power production, independent of solar energy collection, and improved parity with the grid. A molten salt steam generator converts the stored thermal energy into steam, which powers a steam turbine generator to produce electricity. This paper describes the conceptual design of the plant, the advantages of modularity, expected performance, pathways to cost reductions, and environmental impact.

  4. Indoor Localization Algorithms for an Ambulatory Human Operated 3D Mobile Mapping System

    SciTech Connect (OSTI)

    Corso, N; Zakhor, A

    2013-12-03

    Indoor localization and mapping is an important problem with many applications such as emergency response, architectural modeling, and historical preservation. In this paper, we develop an automatic, off-line pipeline for metrically accurate, GPS-denied, indoor 3D mobile mapping using a human-mounted backpack system consisting of a variety of sensors. There are three novel contributions in our proposed mapping approach. First, we present an algorithm which automatically detects loop closure constraints from an occupancy grid map. In doing so, we ensure that constraints are detected only in locations that are well conditioned for scan matching. Secondly, we address the problem of scan matching with poor initial condition by presenting an outlier-resistant, genetic scan matching algorithm that accurately matches scans despite a poor initial condition. Third, we present two metrics based on the amount and complexity of overlapping geometry in order to vet the estimated loop closure constraints. By doing so, we automatically prevent erroneous loop closures from degrading the accuracy of the reconstructed trajectory. The proposed algorithms are experimentally verified using both controlled and real-world data. The end-to-end system performance is evaluated using 100 surveyed control points in an office environment and obtains a mean accuracy of 10 cm. Experimental results are also shown on three additional datasets from real world environments including a 1500 meter trajectory in a warehouse sized retail shopping center.

  5. Paso del Norte ozone study VOC measurements, 1996

    SciTech Connect (OSTI)

    Seila, R.L.; Main, H.; Arriaga, J.L.; Martinez, G.V.; Ramadan, A.B.

    1999-11-01

    The results of VOC determinations of ambient air samples collected at surface air quality monitoring sites and near sources of interest on the US and Mexican side of the border during six weeks of the 1996 Paso del Norte Ozone Study are reported. Carbonyl samples were collected on DNPH impregnated cartridges at three surface sites and analyzed by HPLC to quantify 13, C-1 to C-8 species. Whole air samples were collected in electro-polished stainless steel canisters which were returned to laboratory for determination of C-2 to C-10+ hydrocarbons by cryogenic preconcentration capillary gas chromatography with flame ionization detection (gc-fid). Several sources were sampled: rush hour traffic, propane-powered bus exhaust, automobile paint shop emissions, propane fuel, petroleum refinery, and industrial manufacturing site. Spatial and temporal characteristics of VOC species concentrations and compositions are presented. Overall surface TNMOC values ranged from 0.1 to 3.4 ppmC with the highest concentrations recorded in the morning at three vehicle-dominated sites, two in Cuidad Juarez and one in downtown El Paso. Toluene in El Paso samples and propane, which is used as a cooking and transportation fuel in Cuidad Juarez, were the most abundant hydrocarbons.

  6. Paso del Norte ozone study VOC measurements, 1996

    SciTech Connect (OSTI)

    Seila, R.L.; Main, H.; Arriaga, J.L.; Martinez, G.V.; Ramadan, A.B.

    1999-01-01

    The results of VOC determinations of ambient air samples collected at surface air quality monitoring sites and near sources of interest on the US and Mexican side of the border during six weeks of the 1996 Paso del Norte Ozone Study are reported. Carbonyl samples were collected on DNPH impregnated cartridges at three surface sites and analyzed by HPLC to quantify 13, C-1 to C-8 species. Whole air samples were collected in electro-polished stainless steel canisters which were returned to laboratory for determination of C-2 to C-10+ hydrocarbons by cryogenic preconcentration capillary gas chromatography with flame ionization detection (gc-fid). Several sources were sampled: rush hour traffic, propane-powered bus exhaust, automobile paint shop emissions, propane fuel, petroleum refinery, and industrial manufacturing site. Spatial and temporal characteristics of VOC species concentrations and compositions are presented. Overall surface TNMOC values ranged from 0.1 to 3.4 ppmC with the highest concentrations recorded in the morning at three vehicle-dominated sites, two in Cuidad Juarez and one in downtown El Paso. Toluene in El Paso samples and propane, which is used as a cooking and transportation fuel in Cuidad Juarez, were the most abundant hydrocarbons.

  7. Financing earth-sheltered housing: a report on a project to facilitate the loan process

    SciTech Connect (OSTI)

    Not Available

    1982-02-01

    The problem of financing innovative energy-conserving dwellings is exacerbated by two key factors. The first is that borrowers (potential homebuilders) do not understand the mortgage process and needs of the lenders and are therefore unable to communicate effectively the various issues of interest to lenders. The second is that lenders do not have a familiarity with the concept and are therefore unable to evaluate the potential marketability should the borrower default. This situation is compounded by the fact that there are, in general, few or no earth-sheltered comparables on which to verify the market value. This borrower's guide is presented to explore the situation and with the help of financial agencies, to develop means to mitigate the problems. Information is presented on options available for short- and long-term financing; lenders' obligations and concerns; criteria lenders' use in deciding eligibility for a loan; shopping for a lending institution; and making the presentation to a lending institution for an earth-covered building. (MCW)

  8. Soybean Knowledge Base (SoyKB): a Web Resource for Soybean Translational Genomics

    SciTech Connect (OSTI)

    Joshi, Trupti; Patil, Kapil; Fitzpatrick, Michael R.; Franklin, Levi D.; Yao, Qiuming; Cook, Jeffrey R.; Wang, Zhem; Libault, Marc; Brechenmacher, Laurent; Valliyodan, Babu; Wu, Xiaolei; Cheng, Jianlin; Stacey, Gary; Nguyen, Henry T.; Xu, Dong

    2012-01-17

    Background: Soybean Knowledge Base (SoyKB) is a comprehensive all-inclusive web resource for soybean translational genomics. SoyKB is designed to handle the management and integration of soybean genomics, transcriptomics, proteomics and metabolomics data along with annotation of gene function and biological pathway. It contains information on four entities, namely genes, microRNAs, metabolites and single nucleotide polymorphisms (SNPs). Methods: SoyKB has many useful tools such as Affymetrix probe ID search, gene family search, multiple gene/ metabolite search supporting co-expression analysis, and protein 3D structure viewer as well as download and upload capacity for experimental data and annotations. It has four tiers of registration, which control different levels of access to public and private data. It allows users of certain levels to share their expertise by adding comments to the data. It has a user-friendly web interface together with genome browser and pathway viewer, which display data in an intuitive manner to the soybean researchers, producers and consumers. Conclusions: SoyKB addresses the increasing need of the soybean research community to have a one-stop-shop functional and translational omics web resource for information retrieval and analysis in a user-friendly way. SoyKB can be publicly accessed at http://soykb.org/.

  9. An engineering-economic analysis of combined heat and power technologies in a (mu)grid application

    SciTech Connect (OSTI)

    Bailey, Owen; Ouaglal, Boubekeur; Bartholomew, Emily; Marnay, Chris; Bourassa, Norman

    2002-03-01

    This report describes an investigation at Ernesto Orlando Lawrence Berkeley National Laboratory (Berkeley Lab) of the potential for coupling combined heat and power (CHP) with on-site electricity generation to provide power and heating, and cooling services to customers. This research into distributed energy resources (DER) builds on the concept of the microgrid (mGrid), a semiautonomous grouping of power-generating sources that are placed and operated by and for the benefit of its members. For this investigation, a hypothetical small shopping mall (''Microgrid Oaks'') was developed and analyzed for the cost effectiveness of installing CHP to provide the mGrid's energy needs. A mGrid consists of groups of customers pooling energy loads and installing a combination of generation resources that meets the particular mGrid's goals. This study assumes the mGrid is seeking to minimize energy costs. mGrids could operate independently of the macrogrid (the wider power network), but they are usually assumed to be connected, through power electronics, to the macrogrid. The mGrid in this study is assumed to be interconnected to the macrogrid, and can purchase some energy and ancillary services from utility providers.

  10. Contamination source review for Building E3180, Edgewood Area, Aberdeen Proving Ground, Maryland

    SciTech Connect (OSTI)

    Zellmer, S.D.; Smits, M.P.; Rueda, J.; Zimmerman, R.E.

    1995-09-01

    This report was prepared by Argonne National Laboratory (ANL) to document the results of a contamination source review of Building E3180 at the Aberdeen Proving Ground (APG) in Maryland. The report may be used to assist the US Army in planning for the future use or disposition of this building. The review included a historical records search, physical inspection, photographic documentation, geophysical investigation, collection of air samples, and review of available records regarding underground storage tanks associated with Building E3180. The field investigations were performed by ANL during 1994. Building,E3180 (current APG designation) is located near the eastern end of Kings Creek Road, north of Kings Creek, and about 0.5 miles east of the airstrip within APG`s Edgewood Area. The building was constructed in 1944 as a facsimile of a Japanese pillbox and used for the development of flame weapons systems until 1957 (EAI Corporation 1989). The building was not used from 1957 until 1965, when it was converted and used as a flame and incendiary laboratory. During the 1970s, the building was converted to a machine (metal) shop and used for that purpose until 1988.

  11. Nuclear rapprochement in Argentina and Brazil: Workshop summary

    SciTech Connect (OSTI)

    James E. Doyle

    1999-10-01

    On October 21 and 22, 1998, the Center for International Security Affairs at Los Alamos National Laboratory and the Center for Global Security and Cooperation at Science Applications International Corporation hosted the first of a series of work-shops on states that have chosen to roll back their pursuit of nuclear arms. The objective of the workshop series is to conduct a systematic evaluation of the roles played by U.S. nonproliferation policy in cases of nuclear rollback or restraint and to provide recommendations for future nonproliferation efforts based on lessons learned. Key attendees at the workshop included officials and former officials from the foreign ministries of Argentina and Brazil, and current and former officials from the U.S. Department of State, the Arms Control and Disarmament Agency (ACDA), and the Department of Energy (DOE). Scholars and independent researchers who have examined nuclear policy in Argentina and Brazil also participated. This workshop report includes important background information that helps set the stage for assessing nuclear policies in Argentina and Brazil. It describes national perspectives and areas of consensus and debate among the participants, particularly on the questions of lessons learned and their salience to proliferation challenges in other states. It also summarizes key questions and propositions regarding the roles played in these cases by U.S. nonproliferation policy.

  12. Novel injector techniques for coal-fueled diesel engines

    SciTech Connect (OSTI)

    Badgley, P.R.

    1992-09-01

    This report, entitled Novel Injector Techniques for Coal-Fueled Diesel Engines,'' describes the progress and findings of a research program aimed at development of a dry coal powder fuel injector in conjunction with the Thermal Ignition Combustion System (TICS) concept to achieve autoignition of dry powdered coal in a single-cylinder high speed diesel engine. The basic program consisted of concept selection, analysis and design, bench testing and single cylinder engine testing. The coal injector concept which was selected was a one moving part dry-coal-powder injector utilizing air blast injection. Adiabatics has had previous experience running high speed diesel engines on both direct injected directed coal-water-slurry (CWS) fuel and also with dry coal powder aspirated into the intake air. The Thermal Ignition Combustion System successfully ignited these fuels at all speeds and loads without requiring auxiliary ignition energy such as pilot diesel fuel, heated intake air or glow or spark plugs. Based upon this prior experience, it was shown that the highest efficiency and fastest combustion was with the dry coal, but that the use of aspiration of coal resulted in excessive coal migration into the engine lubrication system. Based upon a desire of DOE to utilize a more modern test engine, the previous naturally-aspirated Caterpillar model 1Y73 single cylinder engine was replaced with a turbocharged (by use of shop air compressor and back pressure control valve) single cylinder version of the Cummins model 855 engine.

  13. Treatment of EBR-I NaK mixed waste at Argonne National Laboratory and subsequent land disposal at the Idaho National Engineering and Environmental Laboratory.

    SciTech Connect (OSTI)

    Herrmann, S. D.; Buzzell, J. A.; Holzemer, M. J.

    1998-02-03

    Sodium/potassium (NaK) liquid metal coolant, contaminated with fission products from the core meltdown of Experimental Breeder Reactor I (EBR-I) and classified as a mixed waste, has been deactivated and converted to a contact-handled, low-level waste at Argonne's Sodium Component Maintenance Shop and land disposed at the Radioactive Waste Management Complex. Treatment of the EBR-I NaK involved converting the sodium and potassium to its respective hydroxide via reaction with air and water, followed by conversion to its respective carbonate via reaction with carbon dioxide. The resultant aqueous carbonate solution was solidified in 55-gallon drums. Challenges in the NaK treatment involved processing a mixed waste which was incompletely characterized and difficult to handle. The NaK was highly radioactive, i.e. up to 4.5 R/hr on contact with the mixed waste drums. In addition, the potential existed for plutonium and toxic characteristic metals to be present in the NaK, resultant from the location of the partial core meltdown of EBR-I in 1955. Moreover, the NaK was susceptible to degradation after more than 40 years of storage in unmonitored conditions. Such degradation raised the possibility of energetic exothermic reactions between the liquid NaK and its crust, which could have consisted of potassium superoxide as well as hydrated sodium/potassium hydroxides.

  14. Standard terminal panel and UPS (uninterruptible power supply) design for exterior intrusion detectors and data collection applications

    SciTech Connect (OSTI)

    Wolfenbarger, F.M.

    1989-01-01

    Need for standardization has been discussed for years by many government agencies. In the past, every perimeter site upgrade resulted in the design, specification, procurement, and fabrication of a unique power and signal junction box. To save design and specification cost, a standard terminal panel and uninterruptible power supply (UPS) design for an exterior intrusion sensor detection system was developed for a security system within the Sandia National Laboratories complex at Albuquerque, New Mexico. In facilitating this requirement a design was sought that could easily be modified for other government or commercial applications and one that could easily be fabricated in the shop. Also of primary importance was the need for lightning protection for both the communications and voltage sources. A 12V dc UPS with a current capacity of up to 4 amperes complements the standard terminal design and allows uninterrupted sensor operation for a number of hours should the primary ac source be interrupted. This report encompasses the features of the designs. The designs are also being used and continuously evaluated in Sandia's Area III exterior test field. 7 figs.

  15. Energy Saving Melting and Revert Reduction Technology: Melting Efficiency in Die Casting Operations

    SciTech Connect (OSTI)

    David Schwam

    2012-12-15

    This project addressed multiple aspects of the aluminum melting and handling in die casting operations, with the objective of increasing the energy efficiency while improving the quality of the molten metal. The efficiency of melting has always played an important role in the profitability of aluminum die casting operations. Consequently, die casters need to make careful choices in selecting and operating melting equipment and procedures. The capital cost of new melting equipment with higher efficiency can sometimes be recovered relatively fast when it replaces old melting equipment with lower efficiency. Upgrades designed to improve energy efficiency of existing equipment may be well justified. Energy efficiency is however not the only factor in optimizing melting operations. Melt losses and metal quality are also very important. Selection of melting equipment has to take into consideration the specific conditions at the die casting shop such as availability of floor space, average quantity of metal used as well as the ability to supply more metal during peaks in demand. In all these cases, it is essential to make informed decisions based on the best available data.

  16. The CO-OP Guide

    SciTech Connect (OSTI)

    Michael, J.; /Fermilab

    1991-08-16

    You are at D0, the newest and most advanced experiment at Fermilab. Its goal is to find the 'top quark', nicknamed 'truth'. theoretically one of the six fundamental building blocks of matter. Combinations of the six quarks are said to make up electrons, protons and neutrons. Your group at D0 is the cryogenic division. Its goal is to provide and maintain a cryogenic system which ultimately supplies and controls the liquid argon used in the giant cryostats for the experiment. The high purity liquid argon is needed to keep the detector modules inside the cryostats cold, so that they will operate properly. Your job at D0 is to be a co-op for the research and development group of the cryogenics division. Your goals are dependent on the needs of the cryo group. D0 is where you will spend most of your time. The co-op office is located on what is known as the 3rd floor, but is actually on the ground floor. The floor directly above the 3rd floor is the 5th floor, which contains your immediate superiors and the D0 secretary. The 6th and top floor is above that, and contains the D0 secretary for official and important business. On the other side of the D0 assembly building is the cryo control room. This is where the cryogenic piping system is remotely monitored and controlled. Other important sites at D0 include the trailer city on the north parking lot, which has the D0 secretary who handles all the payroll matters (among other duties), and the portakamp in the south parking lot. Besides D0, which is named for its location on the particle accelerator ring. the most important place is Wilson Hall. That is the large building shaped like a big Atact symbol. It contains various important people such as the safety group. the personnel department (which you have already encountered. being hired), the minor stock room, the cafeteria, the Fermi library. Ramsey Auditorium. etc. Behind Wilson Hall is the Booster Ring, which accelerates particles before they are injected into the main ring. Inside the booster ring are the East and West Booster towers, which contain cryogenic support groups. The D0 cryo group offices used to be in the West Booster Portakamps. Away from Wilson Hall, there are various buildings strewn about the Fermilab property that have important functional uses to D0. One such example is Lab A. This is where the now unused bubble chamber resides. which was used to take pictures of particle motion. Many of our group is from the bubble chamber, and occasionally stories from the 'bubble chamber days' can be heard as someone waxes nostalgic. Lab A has a machine shop and many technicians. All three of the cryostats used in the D0 experiment went through Lab A for preparation and installation work. Lab A is located directly up the road from the front of Wilson Hall (north-east). Its unmistakable dark geodesic dome makes it easy to find. The Feynman Computer building, located east and just a little bit north of Wilson Hall, houses the computer repair people. If any of the computers used in our group crash and burn, we must take them to the third floor of Feynman to be fixed or exchanged. On one side is the Prep department, which handles the VAX mainframe computers, and on the other is personal computer repair, which handles Fermi Macs and IBMs. Directly north of Wilson Hall is Site 38. This site is the location of many important Fermilab facilities, such as the Fermi fire department, the carpenter's shop, the Fermi gas pumps, the main stock room, and shipping and receiving. Lastly, but perhaps most significantly, is the Fermilab Village. In addition to the machine shops, the cut shop, welding facilities, and the garishly painted physicist dorms, there are such things as a gym, a pool and other facilities to take the edge off a weary mind. The village is located just north off Batavia road on the east side of Fermilab. The village barn is the first and most notable building as one approaches.

  17. TITLE III EVALUATION REPORT FOR THE SURFACE AND SUBSURFACE POWER SYSTEM

    SciTech Connect (OSTI)

    W.J. REED

    1999-08-16

    The objective of this evaluation is to provide recommendations to ensure consistency between the technical baseline requirements, baseline design, and the alternate constructed power system. Recommendations for resolving discrepancies between the alternate constructed power system, the technical baseline requirements, and the baseline design are included in this report. Cost and schedule estimates are provided for all recommended modifications. This report does not address items which do not meet current safety or code requirements. These items are identified to the CMO and immediate action is taken to correct the situation. The report does identify safety and code items for which the A/E is recommending improvements. The recommended improvements will exceed the minimum requirements of applicable code and safety guidelines. These recommendations are intended to improve and enhance the operation and maintenance of the facility. This Title III Evaluation Report (TER) does not include evaluation of surface electrical construction support facilities used to provide temporary construction power where the intent to remove such facilities when construction is completed such as tent storage buildings, shop buildings, fuel storage area etc. Furthermore, this TER does not include the extension of the existing overhead power lines to the booster pump station that was designed, installed, and is maintained by Nevada Test Site (NTS).

  18. DOWNHOLE POWER GENERATION AND WIRELESS COMMUNICATIONS FOR INTELLIGENT COMPLETIONS APPLICATIONS

    SciTech Connect (OSTI)

    Paul Tubel

    2003-07-05

    The third quarter of the project was dedicated to creating the detailed design for the manufacturing of the mechanical system for wireless communications and the power generation module. Another emphasis for the quarter was the development of the surface system and acoustic detector for the downhole tool for 2 way communications. The tasks accomplished during this report period were: (1) All detailed drawings for manufacturing of the wireless communications gauge and power generator were completed and the drawings were forward to a machine shop for manufacturing. (2) The power generator was incorporated to the mandrel of the wireless gauge reducing the length of the tool by 25% and manufacturing cost by about 35%. (3) The new piezoelectric acoustic generator was manufactured successfully and it was delivered during this quarter. The assembly provides a new technique to manufacture large diameter piezoelectric based acoustic generators. (4) The acoustic two-way communications development progressed significantly. The real time firmware for the surface system was developed and the processor was able to detect and process the data frame transmitted from downhole. The analog section of the tool was also developed and it is being tested for filtering capabilities and signal detection and amplification. (5) The new transformer to drive the piezoelectric wafer assembly was designed and manufactured. The transformer has been received and it will go through testing and evaluation during the next quarter.

  19. Shock and Detonation Physics at Los Alamos National Laboratory

    SciTech Connect (OSTI)

    Robbins, David L; Dattelbaum, Dana M; Sheffield, Steve A

    2012-08-22

    WX-9 serves the Laboratory and the Nation by delivering quality technical results, serving customers that include the Nuclear Weapons Program (DOE/NNSA), the Department of Defense, the Department of Homeland Security and other government agencies. The scientific expertise of the group encompasses equations-of-state, shock compression science, phase transformations, detonation physics including explosives initiation, detonation propagation, and reaction rates, spectroscopic methods and velocimetry, and detonation and equation-of-state theory. We are also internationally-recognized in ultra-fast laser shock methods and associated diagnostics, and are active in the area of ultra-sensitive explosives detection. The facility capital enabling the group to fulfill its missions include a number of laser systems, both for laser-driven shocks, and spectroscopic analysis, high pressure gas-driven guns and powder guns for high velocity plate impact experiments, explosively-driven techniques, static high pressure devices including diamond anvil cells and dilatometers coupled with spectroscopic probes, and machine shops and target fabrication facilities.

  20. Customer adoption of small-scale on-site power generation

    SciTech Connect (OSTI)

    Siddiqui, Afzal S.; Marnay, Chris; Hamachi, Kristina S.; Rubio, F. Javier

    2001-04-01

    The electricity supply system is undergoing major regulatory and technological change with significant implications for the way in which the sector will operate (including its patterns of carbon emissions) and for the policies required to ensure socially and environmentally desirable outcomes. One such change stems from the rapid emergence of viable small-scale (i.e., smaller than 500 kW) generators that are potentially competitive with grid delivered electricity, especially in combined heat and power configurations. Such distributed energy resources (DER) may be grouped together with loads in microgrids. These clusters could operate semi-autonomously from the established power system, or macrogrid, matching power quality and reliability more closely to local end-use requirements. In order to establish a capability for analyzing the effect that microgrids may have on typical commercial customers, such as office buildings, restaurants, shopping malls, and grocery stores, an economic mod el of DER adoption is being developed at Berkeley Lab. This model endeavors to indicate the optimal quantity and type of small on-site generation technologies that customers could employ given their electricity requirements. For various regulatory schemes and general economic conditions, this analysis produces a simple operating schedule for any installed generators. Early results suggest that many commercial customers can benefit economically from on-site generation, even without considering potential combined heat and power and reliability benefits, even though they are unlikely to disconnect from the established power system.

  1. Repowering with pressurized fluidized-bed combustion units

    SciTech Connect (OSTI)

    Goidich, S.J. ); Rubow, L.N. ); Kumar, S. . Environmental Services and Technologies Div.); Mukherjee, D. ); Childress, N.B. )

    1991-05-01

    Turbocharged pressurized fluidized bed combustion (PFBC) power plants operating with a gas turbine inlet temperature lower than 800{degrees}F can produce electricity more efficiently (34.2 vs. 33.5% net plant efficiency) and at a lower cost of electricity (87.8 vs. 96. 6 mill/kWh over 30 years) than conventional pulverized-coal-fired plants with scrubbers. Since the PFBC process produces lower NO{sub x} emissions than conventional pulverized-coal combustion systems and captures sulfur as part of the combustion process, and since major equipment components can be shop-assembled and shipped by barge, retrofit of an existing unit with a turbocharged PFBC boiler can be a cost-effective means for extending the life of the unit and meeting NSPS without retrofitting flue gas desulfurization systems. Using the Wisconsin Electric Power Company's Port Washington Unit 5 as an example, preliminary engineering and economic evaluations were made to investigate the merits of turbocharged PFBC retrofits. This report describes the conceptual designs of the new, major plant components; discusses how the new components are integrated with the existing balance-of-plant equipment; describes the proposed plant control system; and presents an overall economic evaluation. Because design and economic evaluations were prepared on the basis of a commercial design, first-of-a-kind costs and test programs are not included. 5 refs., 58 figs., 55 tabs.

  2. Health-hazard evaluation report HETA 90-232-2138, Schulte Corporation, Cincinnati, Ohio

    SciTech Connect (OSTI)

    Venable, H.L.; Kawamoto, M.M.

    1991-09-01

    In response to a confidential request from employees of the Schulte Corporation (SIC-3496), Cincinnati, Ohio, an evaluation was undertaken of complaints of chest tightness, itching, metallic taste in the mouth, and discharge of black dust from the noses of workers in the machine shop of the facility. The facility was involved in the manufacturing and shipping of epoxy coated steel wire shelving. Total dust samples taken in the breathing zone of the workers ranged from 0.49 to 4.78mg/cu m, well below the permissible limits. Respirable dust samples ranged from 0.05 to 0.43mg/cu m. Exposures to nitrogen oxides were well below acceptable limits. Aldehydes were not detected in samples evaluating exposure to two resistance welders. The NIOSH ceiling level of 0.1 part per million for ozone (10028156) was exceeded near welders. Six workers interviewed reported symptoms including black nasal discharge, headaches, sore throat, cough, hoarseness of voice, metallic taste and chest tightness. There was a potential ergonomic problem due to repetitive wrist motion. The authors conclude that a potential hazard from ozone exposure existed. The authors recommend measures to reduce exposures and development of a program for the prevention of cumulative trauma.

  3. Novel injector techniques for coal-fueled diesel engines. Final report

    SciTech Connect (OSTI)

    Badgley, P.R.

    1992-09-01

    This report, entitled ``Novel Injector Techniques for Coal-Fueled Diesel Engines,`` describes the progress and findings of a research program aimed at development of a dry coal powder fuel injector in conjunction with the Thermal Ignition Combustion System (TICS) concept to achieve autoignition of dry powdered coal in a single-cylinder high speed diesel engine. The basic program consisted of concept selection, analysis and design, bench testing and single cylinder engine testing. The coal injector concept which was selected was a one moving part dry-coal-powder injector utilizing air blast injection. Adiabatics has had previous experience running high speed diesel engines on both direct injected directed coal-water-slurry (CWS) fuel and also with dry coal powder aspirated into the intake air. The Thermal Ignition Combustion System successfully ignited these fuels at all speeds and loads without requiring auxiliary ignition energy such as pilot diesel fuel, heated intake air or glow or spark plugs. Based upon this prior experience, it was shown that the highest efficiency and fastest combustion was with the dry coal, but that the use of aspiration of coal resulted in excessive coal migration into the engine lubrication system. Based upon a desire of DOE to utilize a more modern test engine, the previous naturally-aspirated Caterpillar model 1Y73 single cylinder engine was replaced with a turbocharged (by use of shop air compressor and back pressure control valve) single cylinder version of the Cummins model 855 engine.

  4. Finite element analyses of tool stresses in metal cutting processes

    SciTech Connect (OSTI)

    Kistler, B.L.

    1997-01-01

    In this report, we analytically predict and examine stresses in tool tips used in high speed orthogonal machining operations. Specifically, one analysis was compared to an existing experimental measurement of stresses in a sapphire tool tip cutting 1020 steel at slow speeds. In addition, two analyses were done of a carbide tool tip in a machining process at higher cutting speeds, in order to compare to experimental results produced as part of this study. The metal being cut was simulated using a Sandia developed damage plasticity material model, which allowed the cutting to occur analytically without prespecifying the line of cutting/failure. The latter analyses incorporated temperature effects on the tool tip. Calculated tool forces and peak stresses matched experimental data to within 20%. Stress contours generally agreed between analysis and experiment. This work could be extended to investigate/predict failures in the tool tip, which would be of great interest to machining shops in understanding how to optimize cost/retooling time.

  5. ActivitySim: large-scale agent based activity generation for infrastructure simulation

    SciTech Connect (OSTI)

    Gali, Emmanuel; Eidenbenz, Stephan; Mniszewski, Sue; Cuellar, Leticia; Teuscher, Christof

    2008-01-01

    The United States' Department of Homeland Security aims to model, simulate, and analyze critical infrastructure and their interdependencies across multiple sectors such as electric power, telecommunications, water distribution, transportation, etc. We introduce ActivitySim, an activity simulator for a population of millions of individual agents each characterized by a set of demographic attributes that is based on US census data. ActivitySim generates daily schedules for each agent that consists of a sequence of activities, such as sleeping, shopping, working etc., each being scheduled at a geographic location, such as businesses or private residences that is appropriate for the activity type and for the personal situation of the agent. ActivitySim has been developed as part of a larger effort to understand the interdependencies among national infrastructure networks and their demand profiles that emerge from the different activities of individuals in baseline scenarios as well as emergency scenarios, such as hurricane evacuations. We present the scalable software engineering principles underlying ActivitySim, the socia-technical modeling paradigms that drive the activity generation, and proof-of-principle results for a scenario in the Twin Cities, MN area of 2.6 M agents.

  6. Validation of an Integrated Hydrogen Energy Station

    SciTech Connect (OSTI)

    Edward C. Heydorn

    2012-10-26

    This report presents the results of a 10-year project conducted by Air Products and Chemicals, Inc. (Air Products) to determine the feasibility of coproducing hydrogen with electricity. The primary objective was to demonstrate the technical and economic viability of a hydrogen energy station using a high-temperature fuel cell designed to produce power and hydrogen. This four-phase project had intermediate go/no-go decisions and the following specific goals: • Complete a technical assessment and economic analysis of the use of high-temperature fuel cells, including solid oxide and molten carbonate, for the co-production of power and hydrogen (energy park concept). • Build on the experience gained at the Las Vegas H2 Energy Station and compare/contrast the two approaches for co-production. • Determine the applicability of co-production from a high-temperature fuel cell for the existing merchant hydrogen market and for the emerging hydrogen economy. • Demonstrate the concept on natural gas for six months at a suitable site with demand for both hydrogen and electricity. • Maintain safety as the top priority in the system design and operation. • Obtain adequate operational data to provide the basis for future commercial activities, including hydrogen fueling stations. Work began with the execution of the cooperative agreement with DOE on 30 September 2001. During Phase 1, Air Products identified high-temperature fuel cells as having the potential to meet the coproduction targets, and the molten carbonate fuel cell system from FuelCell Energy, Inc. (FuelCell Energy) was selected by Air Products and DOE following the feasibility assessment performed during Phase 2. Detailed design, construction and shop validation testing of a system to produce 250 kW of electricity and 100 kilograms per day of hydrogen, along with site selection to include a renewable feedstock for the fuel cell, were completed in Phase 3. The system also completed six months of demonstration operation at the wastewater treatment facility operated by Orange County Sanitation District (OCSD, Fountain Valley, CA). As part of achieving the objective of operating on a renewable feedstock, Air Products secured additional funding via an award from the California Air Resources Board. The South Coast Air Quality Management District also provided cost share which supported the objectives of this project. System operation at OCSD confirmed the results from shop validation testing performed during Phase 3. Hydrogen was produced at rates and purity that met the targets from the system design basis, and coproduction efficiency exceeded the 50% target set in conjunction with input from the DOE. Hydrogen production economics, updated from the Phase 2 analysis, showed pricing of $5 to $6 per kilogram of hydrogen using current gas purification systems. Hydrogen costs under $3 per kilogram are achievable if next-generation electrochemical separation technologies become available.

  7. Proceedings of the Office of Fusion Energy/DOE workshop on ceramic matrix composites for structural applications in fusion reactors

    SciTech Connect (OSTI)

    Jones, R.H. ); Lucas, G.E. )

    1990-11-01

    A workshop to assess the potential application of ceramic matrix composites (CMCs) for structural applications in fusion reactors was held on May 21--22, 1990, at University of California, Santa Barbara. Participants included individuals familiar with materials and design requirements in fusion reactors, ceramic composite processing and properties and radiation effects. The primary focus was to list the feasibility issues that might limit the application of these materials in fusion reactors. Clear advantages for the use of CMCs are high-temperature operation, which would allow a high-efficiency Rankine cycle, and low activation. Limitations to their use are material costs, fabrication complexity and costs, lack of familiarity with these materials in design, and the lack of data on radiation stability at relevant temperatures and fluences. Fusion-relevant feasibility issues identified at this workshop include: hermetic and vacuum properties related to effects of matrix porosity and matrix microcracking; chemical compatibility with coolant, tritium, and breeder and multiplier materials, radiation effects on compatibility; radiation stability and integrity; and ability to join CMCs in the shop and at the reactor site, radiation stability and integrity of joints. A summary of ongoing CMC radiation programs is also given. It was suggested that a true feasibility assessment of CMCs for fusion structural applications could not be completed without evaluation of a material tailored'' to fusion conditions or at least to radiation stability. It was suggested that a follow-up workshop be held to design a tailored composite after the results of CMC radiation studies are available and the critical feasibility issues are addressed.

  8. Sampling for Beryllium Surface Contamination using Wet, Dry and Alcohol Wipe Sampling

    SciTech Connect (OSTI)

    Kerr, Kent

    2004-12-17

    This research project was conducted at the National Nuclear Security Administration's Kansas City Plant, operated by Honeywell Federal Manufacturing and Technologies, in conjunction with the Safety Sciences Department of Central Missouri State University, to compare relative removal efficiencies of three wipe sampling techniques currently used at Department of Energy facilities. Efficiencies of removal of beryllium contamination from typical painted surfaces were tested by wipe sampling with dry Whatman 42 filter paper, with water-moistened (Ghost Wipe) materials, and by methanol-moistened wipes. Test plates were prepared using 100 mm X 15 mm Pyrex Petri dishes with interior surfaces spray painted with a bond coat primer. To achieve uniform deposition over the test plate surface, 10 ml aliquots of solution containing 1 beryllium and 0.1 ml of metal working fluid were transferred to the test plates and subsequently evaporated. Metal working fluid was added to simulate the slight oiliness common on surfaces in metal working shops where fugitive oil mist accumulates over time. Sixteen test plates for each wipe method (dry, water, and methanol) were processed and sampled using a modification of wiping patterns recommended by OSHA Method 125G. Laboratory and statistical analysis showed that methanol-moistened wipe sampling removed significantly more (about twice as much) beryllium/oil-film surface contamination as water-moistened wipes (p< 0.001), which removed significantly more (about twice as much) residue as dry wipes (p <0.001). Evidence for beryllium sensitization via skin exposure argues in favor of wipe sampling with wetting agents that provide enhanced residue removal efficiency.

  9. Transport growth in Bangkok: Energy, environment, and traffic congestion. Workshop proceedings

    SciTech Connect (OSTI)

    Philpott, J.

    1995-07-01

    Bangkok, the capital of Thailand, is a physically and economically complexcity with a complicated transport system. With daily traffic congestion averaging 16 hours, the air quality is such that to breathe street level pollution for 8 eight hours is roughly equivalent to smoking nine cigarettes per day. Estimates suggest idling traffic costs up to $1.6 billion annually. Energy use within the transport sector is on a steady rise with an estimated increase in 11 years of two and one half times. Severe health impacts have begun to effect many residents - young children and the elderly being particularly vulnerable. Bangkok`s air quality and congestion problems are far from hopeless. Great potential exists for Bangkok to remedy its transport-related problems. The city has many necessary characteristics that allow an efficient, economical system of transport. For example, its high density level makes the city a prime candidate for an efficient system of mass transit and the multitude and close proximity of shops, street vendors, restaurants, and residential areas is highly conducive to walking and cycling. Technical knowledge and capacity to devise and implement innovative policies and projects to address air quality and congestion problems is plentiful. There is also consensus among Bangkokians that something needs to be done immediately to clear the air and the roads. However, little has been done. This report proposes a new approach to transport planning for Bangkok that integrates consideration of ecological, social, and financial viability in the process of making decisions regarding managing existing infrastructure and investments in new infrastructure. Selected papers have been indexed separately for inclusion in the Energy Science and Technology Database.

  10. Quality and Performance of LED Flashlights in Kenya: Common End User Preferences and Complaints

    SciTech Connect (OSTI)

    Tracy, Jenny; Jacobson, Arne; Mills, Evan

    2009-09-14

    Flashlights that use LED technology have quickly emerged as the dominant source of portable lighting in Kenya. While flashlights do not normally provide a substitute for kerosene and other highly inefficient fuels, they are an important early manifestation of LED lighting in the developing world that can serve as a platform - or deterrent - to the diffusion of the technology into the broader off-grid lighting market. The lead acid batteries embedded in flashlights also represent an important source of hazardous waste, and flashlight durability is thus an important determinant of the rate of waste disposal. Low-cost LED flashlights with prices from $1 to $4 are now widely available in shops and markets throughout Kenya. The increased penetration of LED technology in the flashlight market is significant, as over half of all Kenyan households report owning a flashlight (Kamfor, 2002). While this shift from conventional incandescent technology to modern LEDs may appear to be a promising development, end users that our research team interviewed expressed a number of complaints about the quality and performance of these new flashlights. This raises concerns about the interests of low-income flashlight users, and it may also indicate the onset of a broader market spoiling effect for off-grid lighting products based on LED technology (Mills and Jacobson, 2008; Lighting Africa, 2007). The quality of low-cost LED flashlights can contribute to market spoiling because these products appear to represent the first contact that most Kenyans have with LED technology. In this report, our team uses interviews with 46 end users of flashlights to collect information about their experiences, perceptions, and preferences. We focus especially on highlighting common complaints from respondents about the flashlights that they have used, as well as on noting the features that they indicated were important when evaluating the quality of a flashlight. In previous laboratory tests, researchers from our team found a wide range of quality and performance among battery powered LED lights (Granderson, et al. 2008).

  11. Reuse of secondhand TVs exported from Japan to the Philippines

    SciTech Connect (OSTI)

    Yoshida, Aya; Terazono, Atsushi

    2010-06-15

    The trade of secondhand electrical and electronic equipment (EEE) from developed to developing countries has become a growing environmental issue owing to concerns about improper recycling of these goods in developing countries. We followed a 12-m cargo container of cathode-ray-tube color TVs exported from Japan to the Philippines in February 2008. We surveyed the number of TVs damaged in transport, as well as the number of malfunctioning TVs from this shipment. In addition, we present the results of interviews with 113 Filipino consumers who intended to buy secondhand EEE at nine secondhand shops in Metro Manila. Approximately 3% of the imported TVs were damaged upon arrival. The importer sold some of the units directly to local dealers, and kept the rest to repair, refurbish and resell. Approximately 40% of the imported TVs malfunctioned and needed repair in addition to basic reconditioning. Most interviewees indicated that they prefer to buy secondhand EEE because the prices are lower than those of brand-new products. Consumers indicated that they planned on using the product for an average of about 5 years, but the actual period of use may be lower. Most end-of-life EEE in the Philippines is dismantled and recycled by unregulated companies and untrained individuals in markets or near landfill sites, and it is clear that a proper collection system and treatment methods are needed for e-waste. In addition to the material flow of secondhand TVs, we also discuss several economic aspects and appropriate control measures of the international reuse of secondhand TVs.

  12. Some problems in sequencing and scheduling utilizing branch and bound algorithms

    SciTech Connect (OSTI)

    Gim, B.

    1988-01-01

    This dissertation deals with branch and bound algorithms which are applied to the two-machine flow-shop problem with sparse precedence constraints and the optimal sequencing and scheduling of multiple feedstocks in a batch-type digester problem. The problem studied here is to find a schedule which minimizes the maximum flow time with the requirement that the schedule does not violate a set of sparse precedence constraints. This research provides a branch and bound algorithm which employs a lower bounding rule and is based on an adjustment of the sequence obtained by applying Johnson's algorithm. It is demonstrated that this lower bounding procedure in conjunction with Kurisu's branching rule is effective for the sparse precedence constraints problem case. Biomass to methane production systems have the potential of supplying 25% of the national gas demand. The optimal operation of a batch digester system requires the sequencing and scheduling of all batches from multiple feedstocks during a fixed time horizon. A significant characteristic of these systems is that the feedstock decays in storage before use in the digester system. The operational problem is to determine the time to allocate to each batch of several feedstocks and then sequence the individual batches so as to maximize biogas production for a single batch type digester over a fixed planning horizon. This research provides a branch and bound algorithm for sequencing and a two-step hierarchical dynamic programming procedure for time allocation scheduling. An efficient heuristic algorithm is developed for large problems and demonstrated to yield excellent results.

  13. Thermodynamic analysis of a possible CO{sub 2}-laser plant included in a heat engine cycle

    SciTech Connect (OSTI)

    Bisio, G.; Rubatto, G.

    1998-07-01

    In these last years, several plants have been realized in some industrialized countries to recover pressure exergy from various fluids. That has been done by means of suitable turbines in particular for blast-furnace top gas and natural gas. Various papers have examined the topic, considering pros and cons. High-power CO{sub 2}-lasers are being more and more widely used for welding, drilling and cutting in machine shops. In the near future different kinds of metal surface treatments will probably become routine practice with laser units. The industries benefiting most from high power lasers will be: the automotive industry, shipbuilding, the offshore industry, the aerospace industry, the nuclear and the chemical processing industries. Both degradation and cooling problems may be alleviated by allowing the gas to flow through the laser tube and by reducing its pressure outside this tube. Thus, a thermodynamic analysis on high-power CO{sub 2}-lasers with particular reference to a possible energy recovery is justified. In previous papers the critical examination of the concept of efficiency has led one of the present authors to the definition of an operational domain in which the process can be achieved. This domain is confined by regions of no entropy production (upper limit) and no useful effects (lower limit). On the basis of these concepts and of what has been done for pressure exergy recovery from other fluids, exergy investigations and an analysis of losses are performed for a cyclic process including a high performance CO2 laser. Thermodynamic analysis of flow processes in a CO{sub 2}-laser plant shows that the inclusion of a turbine in this plant allows us to recover the most part of the exergy necessary for the compressor; in addition, the water consumption for the refrigeration in the heat exchanger is reduced.

  14. Corrective action decision document, Second Gas Station, Tonopah test range, Nevada (Corrective Action Unit No. 403)

    SciTech Connect (OSTI)

    1997-11-01

    This Corrective Action Decision Document (CADD) for Second Gas Station (Corrective Action Unit [CAU] No. 403) has been developed for the U.S. Department of Energy`s (DOE) Nevada Environmental Restoration Project to meet the requirements of the Federal Facility Agreement and Consent Order (FFACO) of 1996 as stated in Appendix VI, {open_quotes}Corrective Action Strategy{close_quotes} (FFACO, 1996). The Second Gas Station Corrective Action Site (CAS) No. 03-02-004-0360 is the only CAS in CAU No. 403. The Second Gas Station CAS is located within Area 3 of the Tonopah Test Range (TTR), west of the Main Road at the location of former Underground Storage Tanks (USTs) and their associated fuel dispensary stations. The TTR is approximately 225 kilometers (km) (140 miles [mi]) northwest of Las Vegas, Nevada, by air and approximately 56 km (35 mi) southeast of Tonopah, Nevada, by road. The TTR is bordered on the south, east, and west by the Nellis Air Force Range and on the north by sparsely populated public land administered by the Bureau of Land Management and the U.S. Forest Service. The Second Gas Station CAS was formerly known as the Underground Diesel Tank Site, Sandia Environmental Restoration Site Number 118. The gas station was in use from approximately 1965 to 1980. The USTs were originally thought to be located 11 meters (m) (36 feet [ft]) east of the Old Light Duty Shop, Building 0360, and consisted of one gasoline UST (southern tank) and one diesel UST (northern tank) (DOE/NV, 1996a). The two associated fuel dispensary stations were located northeast (diesel) and southeast (gasoline) of Building 0360 (CAU 423). Presently the site is used as a parking lot, Building 0360 is used for mechanical repairs of vehicles.

  15. Level III baseline risk evaluation for Building 3505 at Oak Ridge National Laboratory, Oak Ridge, Tennessee

    SciTech Connect (OSTI)

    Mostella, W.B. Jr.

    1994-12-01

    The Level III Baseline Risk Evaluation (BRE) for Building 3505, the ORNL Metal Recovery Facility, provides an analysis of the potential for adverse health effects, current or future, associated with the presence of hazardous substances in the building. The Metal Recovery Facility was used from 1952 through 1960 to process large quantities of radioactive material using the PUREX process for the recovery of uranium-238, plutonium-239, neptunium-237, and americium-241. The facility consists of seven process cells (A through G), a canal, a dissolver room, a dissolver pit, an office, locker room, storage area, control room, electrical gallery, shop, and makeup area. The cells were used to house the nuclear fuel reprocessing equipment, and the canal was constructed to be used as a water-shielded transfer canal. Currently, there are no known releases of radioactive contaminants from Building 3505. To perform the BRE, historical radiological survey data were used to estimate the concentration of alpha- and beta/gamma emitting radionuclides in the various cells, rooms, and other areas in Building 3505. Data from smear surveys were used to estimate the amount of transferable contamination (to which receptors can be exposed via inhalation and ingestion), and data from probe surveys were used to estimate the amount of both fixed and transferable contamination (from which receptors can receive external exposure). Two land use scenarios, current and future, and their subsequent exposure scenarios were explored in the BRE. Under the current land use scenario, two exposure scenarios were evaluated. The first was a worst-case industrial exposure scenario in which the receptor is a maintenance worker who works 8 hours/day, 350 days/year in the building for 25 years. In the second, more realistic exposure scenario, the receptor is a surveillance and maintenance (S&M) worker who spends two 8-hour days/year in the building for 25 years.

  16. Self-reported Impacts of LED Lighting Technology Compared to Fuel-based Lighting on Night Market Business Prosperity in Kenya

    SciTech Connect (OSTI)

    Johnstone, Peter; Jacobson, Arne; Mills, Evan; Mumbi, Maina

    2009-02-11

    The notion of"productive use" is often invoked in discussions about whether new technologies improve productivity or otherwise enhance commerce in developing-country contexts. It an elusive concept,especially when quantitative measures are sought. Improved and more energy efficient illumination systems for off-gridapplication--the focus of the Lumina Project--provide a case in which a significant productivity benefit can be imagined, given the importance of light to the successful performance of many tasks, and the very low quality of baseline illumination provided by flame-based source. This Research Note summarizes self-reported quantitative and qualitative impacts of switching to LED lighting technology on the prosperity of night-market business owners and operators. The information was gathered in the context of our 2008 market testing field work in Kenya?s Rift Valley Province, which was performed in the towns of Maai Mahiu and Karagita by Arne Jacobson, Kristen Radecsky, Peter Johnstone, Maina Mumbi, and others. Maai Mahiu is a crossroads town; provision of services to travelers and freight carriers is a primary income source for the residents. In contrast, the primary income for Karagita's residents is from work in the large, factory style flower farms on the eastern shores of Lake Naivasha that specialize in producing cut flowers for export to the European market. According to residents, both towns had populations of 6,000 to 8,000 people in June 2008. We focused on quantifying the economics of fuel-based and LED lighting technology in the context of business use by night market vendors and shop keepers. Our research activities with the business owners and operators included baseline measurement of their fuel-based lighting use, an initial survey, offering for sale data logger equipped rechargeable LED lamps, monitoring the adoption of the LED lamps, and a follow-up survey.

  17. Environmental assessment: Warren Air Force Base 115-kV transmission line, Cheyenne, Wyoming

    SciTech Connect (OSTI)

    Not Available

    1986-03-01

    The Western Area Power Administration (Western), is propsoing to construct a new electrical tranmission line and substation in southeastern Wyoming. This proposed line, called the Warren Air Force Base Tranmission Line, will supply power for Western's system to Francis E.Warren Air Force Base (F.E. Warren AFB) near Cheyenne. It would allow for increased tranmission capacity to the air base. F.E. Warren AFB currently is served electrically be Western via a 13.8-kv line. It is a wood-pole, double-circuit line without an overhead ground wire, which extends from Western's Cheyenne Substation, through an urban area, and onto the air base. The Cheyenne Substation is located on the south side of the city of Cheyenne. The electrical load on the base is increasing from 4 megawatts (MW) to 11 or 12 MW, an approximate three-fold increase. Voltage problems occasionally occur at the base due to the present electrial loads and to the age and inadequacy of the 13.8-kv line, which was placed in service in 1941. The existing line has served beyond its designed service life and requires replacement. Replacement would be necessary even without an increasing load. F.E. Warren AFB has several new and expanding programs, including additional housing, shopping centers, and the Peacekeeper Missile Program. Part of this expansion already has occured; the remainder is expected by early 1988. This expansion has created the need for additional electrical service. The present 13.8-kV line is not capable of supporting the additional load. 28 refs., 4 figs., 2 tabs.

  18. Principles of Faithful Execution in the implementation of trusted objects.

    SciTech Connect (OSTI)

    Tarman, Thomas David; Campbell, Philip LaRoche; Pierson, Lyndon George

    2003-09-01

    We begin with the following definitions: Definition: A trusted volume is the computing machinery (including communication lines) within which data is assumed to be physically protected from an adversary. A trusted volume provides both integrity and privacy. Definition: Program integrity consists of the protection necessary to enable the detection of changes in the bits comprising a program as specified by the developer, for the entire time that the program is outside a trusted volume. For ease of discussion we consider program integrity to be the aggregation of two elements: instruction integrity (detection of changes in the bits within an instruction or block of instructions), and sequence integrity (detection of changes in the locations of instructions within a program). Definition: Faithful Execution (FE) is a type of software protection that begins when the software leaves the control of the developer and ends within the trusted volume of a target processor. That is, FE provides program integrity, even while the program is in execution. (As we will show below, FE schemes are a function of trusted volume size.) FE is a necessary quality for computing. Without it we cannot trust computations. In the early days of computing FE came for free since the software never left a trusted volume. At that time the execution environment was the same as the development environment. In some circles that environment was referred to as a ''closed shop:'' all of the software that was used there was developed there. When an organization bought a large computer from a vendor the organization would run its own operating system on that computer, use only its own editors, only its own compilers, only its own debuggers, and so on. However, with the continuing maturity of computing technology, FE becomes increasingly difficult to achieve

  19. Pressurized fluidized bed combustion low temperature cycle demonstration plant

    SciTech Connect (OSTI)

    Mukherjee, D.K.

    1984-06-01

    The merits of the turbocharged PFBC cycle are well known. Brown Boveri have been working in the past on a concept to commercialize this technology. As the leader of a team, with Foster Wheeler, Burns and Roe and Research Cottrell, Brown Boveri have conceived a turbocharged PFBC retrofit demonstration plant (20 MWe/40 MWe, net heat rate 11,000 BTU/kWh) which is discussed below. Several old power stations in the USA have small coal-fired electric generatin units which are inactive. The boilers are usually unreliable and their overhauling is uneconomical. The balance of the systems is quite often in a relatively good condition. In this retrofit concept the existing conventional boiler is replaced by a field-assembled PFBC steam generator with pneumatic feed system. It is considered that the steam turbogenerator with its complete condensing plant, together with the coal handling and the storage system can be used. The estimated total construction cost for the retrofit installation amounts to $28,000,000 for the 20 MWe and to $40,200,000 for the 40 MWe plant. This price is accurate to within plus/minus 20%. An extrapolation of these costs for a 80 MWe retrofit unit using barge transport for shop-fabricated and assembled components and applying coal-water slurry feed system result in an investment cost of $600/kW approximately. The cost of a retrofit plant looks attractive and indicates that the PFBC turbocharged cycle is economical compared to the conventional plant with FGD, as has been reported before. Improved cost prediction for a 80 MWe unit is only possible if a conceptual design is carried out.

  20. PFBC (pressurized fluidized bed combustion) turbocharged boiler design and economic study: Volume 1, Executive summary: Final report

    SciTech Connect (OSTI)

    Not Available

    1987-11-01

    A coal combustion technology that promises to reduce the cost of electrical power is pressurized fluidized bed combustion (PFBC). Since a PFBC boiler is physically smaller than a conventional pulverized coal fired boiler with a flue gas desulfurization system (PC/FGD) and the same power rating shop assembly and modularized shipment to the power plant site can be considered. Modular construction can substantially reduce the overall design/construction time. Emission controls are equivalent to, or better than, conventional PC/FGD units, and the PFBC combustor can tolerate coals with a wider range of characteristics. Two PFBC plants and the reference PC/FGD plant were each to have four nominal 250 MW(e) units to be completed for start-up at one year intervals. To establish a well defined consistent design basis for all units, the turbine-generator and steam cycle of a recently constructed 250 MW(e) unit (designed by Fluor and built under Fluor construction management) was selected and made the common element in both of the PFBC plants and the reference PC/FGD plant. Steam conditions of 2400 psia, 1000/sup 0/F were to be identical for all units as were the steam flows for the design load range of 50% to steam turbine valves-wide-open with inlet steam pressure 5% over design pressure (VWO 5% OP). The study produced three plant designs - a 4-unit turbocharged PFBC using bubbling bed technology, a 4-unit turbocharged PFBC using circulating bed technology, and a 4-unit PC/FGD reference plant using conventional pulverized coal technology coupled with wet limestone scrubber technology. The hot gas clean-up system, operating at these more modest temperatures, is capable of reducing the particulate in the gas to a level which meets EPA/NSPS standards without further cleanup. With this level of cleanup, service conditions for the turbocharger turbine are tolerable in commercially available designs and materials. 48 figs., 14 tabs.

  1. Viability of Existing INL Facilities for Dry Storage Cask Handling

    SciTech Connect (OSTI)

    Bohachek, Randy; Wallace, Bruce; Winston, Phil; Marschman, Steve

    2013-04-30

    This report evaluates existing capabilities at the INL to determine if a practical and cost effective method could be developed for opening and handling full-sized dry storage casks. The Idaho Nuclear Technology and Engineering Center (INTEC) CPP-603, Irradiated Spent Fuel Storage Facility, provides the infrastructure to support handling and examining casks and their contents. Based on a reasonable set of assumptions, it is possible to receive, open, inspect, remove samples, close, and reseal large bolted-lid dry storage casks at the INL. The capability can also be used to open and inspect casks that were last examined at the TAN Hot Shop over ten years ago. The Castor V/21 and REA-2023 casks can provide additional confirmatory information regarding the extended performance of low-burnup (<45 GWD/MTU) used nuclear fuel. Once a dry storage cask is opened inside CPP-603, used fuel retrieved from the cask can be packaged in a shipping cask, and sent to a laboratory for testing. Testing at the INLs Materials and Fuels Complex (MFC) can occur starting with shipment of samples from CPP-603 over an on-site road, avoiding the need to use public highways. This reduces cost and reduces the risk to the public. The full suite of characterization methods needed to establish the condition of the fuel exists and MFC. Many other testing capabilities also exist at MFC, but when those capabilities are not adequate, samples can be prepared and shipped to other laboratories for testing. This report discusses how the casks would be handled, what work needs to be done to ready the facilities/capabilities, and what the work will cost.

  2. Viability of Existing INL Facilities for Dry Storage Cask Handling

    SciTech Connect (OSTI)

    Randy Bohachek; Charles Park; Bruce Wallace; Phil Winston; Steve Marschman

    2013-04-01

    This report evaluates existing capabilities at the INL to determine if a practical and cost effective method could be developed for opening and handling full-sized dry storage casks. The Idaho Nuclear Technology and Engineering Center (INTEC) CPP-603, Irradiated Spent Fuel Storage Facility, provides the infrastructure to support handling and examining casks and their contents. Based on a reasonable set of assumptions, it is possible to receive, open, inspect, remove samples, close, and reseal large bolted-lid dry storage casks at the INL. The capability can also be used to open and inspect casks that were last examined at the TAN Hot Shop over ten years ago. The Castor V/21 and REA-2023 casks can provide additional confirmatory information regarding the extended performance of low-burnup (<45 GWD/MTU) used nuclear fuel. Once a dry storage cask is opened inside CPP-603, used fuel retrieved from the cask can be packaged in a shipping cask, and sent to a laboratory for testing. Testing at the INLs Materials and Fuels Complex (MFC) can occur starting with shipment of samples from CPP-603 over an on-site road, avoiding the need to use public highways. This reduces cost and reduces the risk to the public. The full suite of characterization methods needed to establish the condition of the fuel exists and MFC. Many other testing capabilities also exist at MFC, but when those capabilities are not adequate, samples can be prepared and shipped to other laboratories for testing. This report discusses how the casks would be handled, what work needs to be done to ready the facilities/capabilities, and what the work will cost.

  3. Better Buildings Neighborhood Program: BetterBuildings Lowell Final Report

    SciTech Connect (OSTI)

    Heslin, Thomas

    2014-01-31

    The City of Lowell set four goals at the beginning of the Better Buildings Neighborhood Program: 1. Improve the Downtown Historic Park District’s Carbon Footprint 2. Develop a sustainable and replicable model for energy efficiency in historic buildings 3. Create and retain jobs 4. Promote multi‐stakeholder partnerships The City of Lowell, MA was awarded $5 million in May 2010 to conduct energy efficiency retrofits within the downtown National Historical Park (NHP). The City’s target was to complete retrofits in 200,000 square feet of commercial space and create 280 jobs, while adhering to the strict historical preservation regulations that govern the NHP. The development of a model for energy efficiency in historic buildings was successfully accomplished. BetterBuildings Lowell’s success in energy efficiency in historic buildings was due to the simplicity of the program. We relied strongly on the replacement of antiquated HVAC systems and air sealing and a handful of talented energy auditors and contractors. BetterBuildings Lowell was unique for the Better Buildings Neighborhood Program because it was the only program that focused solely on commercial properties. BetterBuildings Lowell did target multi‐family properties, which were reported as commercial, but the majority of the building types and uses were commercial. Property types targeted were restaurants, office buildings, museums, sections of larger buildings, mixed use buildings, and multifamily buildings. This unique fabric of building type and use allows for a deeper understanding to how different properties use energy. Because of the National Historical Park designation of downtown Lowell, being able to implement energy efficiency projects within a highly regulated historical district also provided valuable research and precedent proving energy efficiency projects can be successfully completed in historical districts and historical buildings. Our program was very successful in working with the local Historic Board, which has jurisdiction in the NHP. The Historic Board was cooperative with any exterior renovations as long as they were not changing the existing aesthetics of the property. If we were replacing a rooftop condenser it needed to be placed where the existing rooftop condenser was located. Receiving proper approval from the Historic Board for any external energy conservation measures was known by all the participating contractors. One area of the retrofits that was contentious regarded venting of the new HVAC equipment. Installing external stacks was not allowed so the contractors had to negotiate with the Historic Board regarding the proper way to vent the equipment that met the needs mechanically and aesthetically. Overall BetterBuildings Lowell was successful at implementing energy and cost saving measures into 31 commercial properties located within the NHP. The 31 retrofits had 1,554,768 square feet of commercial and multifamily housing and a total predicted energy savings exceeding 22,869 a year. Overall the City of Lowell achieved its target goals and is satisfied with the accomplishments of the BetterBuildings program. The City will continue to pursue energy efficient programs and projects.

  4. DEVELOPMENT OF REMOTE HANFORD CONNECTOR GASKET REPLACEMENT TOOLING FOR DWPF

    SciTech Connect (OSTI)

    Krementz, D.; Coughlin, Jeffrey

    2009-05-05

    The Defense Waste Processing Facility (DWPF) requested the Savannah River National Laboratory (SRNL) to develop tooling and equipment to remotely replace gaskets in mechanical Hanford connectors to reduce personnel radiation exposure as compared to the current hands-on method. It is also expected that radiation levels will continually increase with future waste streams. The equipment is operated in the Remote Equipment Decontamination Cell (REDC), which is equipped with compressed air, two master-slave manipulators (MSM's) and an electro-mechanical manipulator (EMM) arm for operation of the remote tools. The REDC does not provide access to electrical power, so the equipment must be manually or pneumatically operated. The MSM's have a load limit at full extension of ten pounds, which limited the weight of the installation tool. In order to remotely replace Hanford connector gaskets several operations must be performed remotely, these include: removal of the spent gasket and retaining ring (retaining ring is also called snap ring), loading the new snap ring and gasket into the installation tool and installation of the new gasket into the Hanford connector. SRNL developed and tested tools that successfully perform all of the necessary tasks. Removal of snap rings from horizontal and vertical connectors is performed by separate air actuated retaining ring removal tools and is manipulated in the cell by the MSM. In order install a new gasket, the snap ring loader is used to load a new snap ring into a groove in the gasket installation tool. A new gasket is placed on the installation tool and retained by custom springs. An MSM lifts the installation tool and presses the mounted gasket against the connector block. Once the installation tool is in position, the gasket and snap ring are installed onto the connector by pneumatic actuation. All of the tools are located on a custom work table with a pneumatic valve station that directs compressed air to the desired tool and vents the tools as needed. Extensive testing of tooling operation was performed in the DWPF manipulator repair shop. This testing allowed the operators to gain confidence before the equipment was exposed to radioactive contamination. The testing also led to multiple design improvements. On July 17 and 29, 2008 the Remote Gasket Replacement Tooling was successfully demonstrated in the REDC at the DWPF of The Savannah River Site.

  5. Smart Grid Information Clearinghouse (SGIC)

    SciTech Connect (OSTI)

    Rahman, Saifur

    2014-08-31

    Since the Energy Independence and Security Act of 2007 was enacted, there has been a large number of websites that discusses smart grid and relevant information, including those from government, academia, industry, private sector and regulatory. These websites collect information independently. Therefore, smart grid information was quite scattered and dispersed. The objective of this work was to develop, populate, manage and maintain the public Smart Grid Information Clearinghouse (SGIC) web portal. The information in the SGIC website is comprehensive that includes smart grid information, research & development, demonstration projects, technical standards, costs & benefit analyses, business cases, legislation, policy & regulation, and other information on lesson learned and best practices. The content in the SGIC website is logically grouped to allow easily browse, search and sort. In addition to providing the browse and search feature, the SGIC web portal also allow users to share their smart grid information with others though our online content submission platform. The Clearinghouse web portal, therefore, serves as the first stop shop for smart grid information that collects smart grid information in a non-bias, non-promotional manner and can provide a missing link from information sources to end users and better serve users’ needs. The web portal is available at www.sgiclearinghouse.org. This report summarizes the work performed during the course of the project (September 2009 – August 2014). Section 2.0 lists SGIC Advisory Committee and User Group members. Section 3.0 discusses SGIC information architecture and web-based database application functionalities. Section 4.0 summarizes SGIC features and functionalities, including its search, browse and sort capabilities, web portal social networking, online content submission platform and security measures implemented. Section 5.0 discusses SGIC web portal contents, including smart grid 101, smart grid projects, deployment experience (i.e., use cases, lessons learned, cost-benefit analyses and business cases), in-depth information (i.e., standards, technology, cyber security, legislation, education and training and demand response), as well as international information. Section 6.0 summarizes SGIC statistics from the launch of the portal on July 07, 2010 to August 31, 2014. Section 7.0 summarizes publicly available information as a result of this work.

  6. LANL OPERATING EXPERIENCE WITH THE WAND AND HERCULES PROTOTYPE SYSTEMS

    SciTech Connect (OSTI)

    K. M. GRUETZMACHER; C. L. FOXX; S. C. MYERS

    2000-09-01

    The Waste Assay for Nonradioactive Disposal (WAND) and the High Efficiency Radiation Counters for Ultimate Low Emission Sensitivity (HERCULES) prototype systems have been operating at Los Alamos National Laboratory's (LANL's) Solid Waste Operation's (SWO'S) non-destructive assay (NDA) building since 1997 and 1998, respectively. These systems are the cornerstone of the verification program for low-density Green is Clean (GIC) waste at the Laboratory. GIC waste includes all non-regulated waste generated in radiological controlled areas (RCAS) that has been actively segregated as clean (i.e., nonradioactive) through the use of waste generator acceptable knowledge (AK). The use of this methodology alters LANL's past practice of disposing of all room trash generated in nuclear facilities in radioactive waste landfills. Waste that is verified clean can be disposed of at the Los Alamos County Landfill. It is estimated that 50-90% of the low-density room trash from radioactive material handling areas at Los Alamos might be free of contamination. This approach avoids the high cost of disposal of clean waste at a radioactive waste landfill. It also reduces consumption of precious space in the radioactive waste landfill where disposal of this waste provides no benefit to the public or the environment. Preserving low level waste (LLW) disposal capacity for truly radioactive waste is critical in this era when expanding existing radioactive waste landfills or permitting new ones is resisted by regulators and stakeholders. This paper describes the operating experience with the WAND and HERCULES since they began operation at SWO. Waste for verification by the WAND system has been limited so far to waste from the Plutonium Facility and the Solid Waste Operations Facility. A total of461 ft3 (13.1 m3) of low-density shredded waste and paper have been verified clean by the WAND system. The HERCULES system has been used to verify waste from four Laboratory facilities. These are the Solid Waste Operations Facility, the TA-48 Chemistry Facility, the Shops Facility, and the Environmental Facility. A total of 3150 ft3 (89.3 m3) of low-density waste has been verified clean by the HERCULES system.

  7. Heart to heart - a custodian journal on grassroots ergonomics

    SciTech Connect (OSTI)

    Zalk, D. M., LLNL

    1998-03-04

    When we first requested to speak at the American Society of Safety Engineer`s Professional Development Conference in Seattle, Washington, the theme we had in mind for this program paper was quite different. It definitely was not anything like our title, `Heart to Heart` implies. It was more formal and traditional. Give you figures, diagrams and the like. But two years later, we have come to another conclusion, to tell you the story about how a group of custodians and health & safety professionals dreamed big dreams and they came true. In order to understand what occurred, we first need to start at the very beginning with the Custodian Quality Improvement Team (CQIT). This group had been formed by the Plant Engineering Department at the Lawrence Livermore National Laboratory (LLNL) located in Livermore, California. LLNL is operated by the University of California for The U.S.Department of Energy. It is the premier applied physics research laboratory in the world. Plant Engineering (PE) is much like a Public Works Department. PE has all of the crafts, such as plumbers and electricians, who do maintenance-type work, as well as the engineering and construction employees. PE maintain the utilities, constructs new buildings and takes care of old ones. They take of the roads and clean the buildings and landscape the campus. So the Custodian Shop and its some 150 employees is a member of the PE family so to speak. The CQIT had decided to investigate ways they could reduce the number of injuries they were having. They invited health and safety professionals, David Zalk (an Industrial Hygienist) and Jack Tolley (Safety Engineer) to consult with them about this. They are both Hazards Control Team 4 members at LLNL. They were both interested in ergonomics and suggested that an approach to reducing their injuries might lie in studying how the custodians actually do their work. David has extensive training in ergonomics, and Jack simply had a long-time interest in ergonomics for some 30 years, describing himself as a `learned layman.`

  8. Design of precision mounts for optimizing the conversion efficiency of KDP crystals for the National Ignition Facility

    SciTech Connect (OSTI)

    Hibbard, R.L., LLNL

    1998-03-30

    A key design challenge for the National Ignition Facility (NIF), being constructed at Lawrence Livermore National Laboratory (LLNL), [Hibbard, R L , 1998], is the frequency converter consisting of two KDP crystals and a focusing lens Frequency conversion is a critical performance factor for NIF and the optical mount design for this plays a key role in meeting design specifications The frequency converter is a monolithic cell that mounts the optics and is the point on the beamline where the frequency conversion crystals are optimally aligned and the cell is focused on target The lasing medium is neodymium in phosphate glass with a fundamental frequency (1{omega}) of 1 053 {micro}m Sum frequency generation in a pair of conversion crystals (KDP/KD*P) produces 1 8 MJ of the third harmonic light (3{omega} or {lambda}=O 35 pm). The phase-matching scheme on NIF is type I second harmonic generation followed by type II sum-frequency-mixing of the residual fundamental and the second harmonic light This laser unlike previous laser system designs, must achieve high conversion efficiency, 85%, which is close to the 90 8% theoretical maximum As a result, this design is very sensitive to angular variations in beam propagation and in the crystal axes orientation. Factors that influence the phase matching angle include crystal inhomogeneity, residual and induced stress in the crystals, the crystals` natural and mounted surface figure, mounting imperfections and gravity sag These angular variations need to be controlled within a 40 {micro}rad error budget. The optical mount contributions to the angular error budget are 20 {micro}rad and are what make the frequency converter in the Final Optics Cell (FOC) such a challenging precision design. The premise of using full edge support in the FOC design is primarily driven by the spherical target chamber design that has optics mounted at multiple longitudinal angles and thus gravity sag in the crystals that needs to be minimized To meet the angular performance requirements, a precision monolithic cell with full edge support for mounting the optics to 10 {micro}rad angular and 1-5 {micro}m flatness tolerances is required The NIF frequency converter design is a major step in improving both conversion efficiency and precision of the mount design Another major consideration in the FOC design is the trade-off between cost of manufacturing the cell and the performance of the mount An interesting balance of what can be accomplished with a conventional machine tool in a commercial shop to produce prototype FOC` s will be discussed Metrology issues involved in qualifying the FOC are also discussed.

  9. FOILFEST :community enabled security.

    SciTech Connect (OSTI)

    Moore, Judy Hennessey; Johnson, Curtis Martin; Whitley, John B.; Drayer, Darryl Donald; Cummings, John C., Jr.

    2005-09-01

    The Advanced Concepts Group of Sandia National Laboratories hosted a workshop, ''FOILFest: Community Enabled Security'', on July 18-21, 2005, in Albuquerque, NM. This was a far-reaching look into the future of physical protection consisting of a series of structured brainstorming sessions focused on preventing and foiling attacks on public places and soft targets such as airports, shopping malls, hotels, and public events. These facilities are difficult to protect using traditional security devices since they could easily be pushed out of business through the addition of arduous and expensive security measures. The idea behind this Fest was to explore how the public, which is vital to the function of these institutions, can be leveraged as part of a physical protection system. The workshop considered procedures, space design, and approaches for building community through technology. The workshop explored ways to make the ''good guys'' in public places feel safe and be vigilant while making potential perpetrators of harm feel exposed and convinced that they will not succeed. Participants in the Fest included operators of public places, social scientists, technology experts, representatives of government agencies including DHS and the intelligence community, writers and media experts. Many innovative ideas were explored during the fest with most of the time spent on airports, including consideration of the local airport, the Albuquerque Sunport. Some provocative ideas included: (1) sniffers installed in passage areas like revolving door, escalators, (2) a ''jumbotron'' showing current camera shots in the public space, (3) transparent portal screeners allowing viewing of the screening, (4) a layered open/funnel/open/funnel design where open spaces are used to encourage a sense of ''communitas'' and take advantage of citizen ''sensing'' and funnels are technological tunnels of sensors (the tunnels of truth), (5) curved benches with blast proof walls or backs, (6) making it easy for the public to report, even if not sure/''non-event'' (e.g. ''I'm uncomfortable'') and processing those reports in aggregate not individually, (7) transforming the resident working population into a part-time undercover security/sensor force through more innovative training and (8) adding ambassadors/security that engage in unexpected conversation with the public. The group recommended that we take actions to pursue the following ideas next: (a) A concept for a mobile sensor transport (JMP); (b) Conduct a follow-on workshop; (c) Conduct social experiments/activities to see how people would react to the concepts related to community and security; (d) Explore further aesthetically pleasing, blast-resistance seating areas; and (e) The Art of Freedom (an educational, multi-media campaign).

  10. Project Plan 7930 Cell G PaR Remote Handling System Replacement

    SciTech Connect (OSTI)

    Kinney, Kathryn A

    2009-10-01

    For over 40 years the US Department of Energy (DOE) and its predecessors have made Californium-252 ({sup 252}Cf) available for a wide range of industries including medical, nuclear fuels, mining, military and national security. The Radiochemical Engineering Development Center (REDC) located within the Oak Ridge National Laboratory (ORNL) processes irradiated production targets from the High Flux Isotope Reactor (HFIR). Operations in Building 7930, Cell G provide over 70% of the world's demand for {sup 252}Cf. Building 7930 was constructed and equipped in the mid-1960s. Current operations for {sup 252}Cf processing in Building 7930, Cell G require use of through-the-wall manipulators and the PaR Remote Handling System. Maintenance and repairs for the manipulators is readily accomplished by removal of the manipulator and relocation to a repair shop where hands-on work can be performed in glove boxes. Contamination inside cell G does not currently allow manned entry and no provisions were created for a maintenance area inside the cell. There has been no maintenance of the PaR system or upgrades, leaving operations vulnerable should the system have a catastrophic failure. The Cell G PaR system is currently being operated in a run to failure mode. As the manipulator is now 40+ years old there is significant risk in this method of operation. In 2006 an assessment was completed that resulted in recommendations for replacing the manipulator operator control and power centers which are used to control and power the PaR manipulator in Cell G. In mid-2008 the chain for the bridge drive failed and subsequent examinations indicated several damaged links (see Figure 1). To continue operations the PaR manipulator arm is being used to push and pull the bridge as a workaround. A retrieval tool was fabricated, tested and staged inside Cell G that will allow positioning of the bridge and manipulator arm for removal from the cell should the PaR system completely fail. A fully functioning and reliable Par manipulator arm is necessary for uninterrupted {sup 252}Cf operations; a fully-functioning bridge is needed for the system to function as intended.

  11. A method to estimate the fractional fat volume within a ROI of a breast biopsy for WAXS applications: Animal tissue evaluation

    SciTech Connect (OSTI)

    Tang, Robert Y.; McDonald, Nancy Laamanen, Curtis; LeClair, Robert J.

    2014-11-01

    Purpose: To develop a method to estimate the mean fractional volume of fat (?{sup }{sub fat}) within a region of interest (ROI) of a tissue sample for wide-angle x-ray scatter (WAXS) applications. A scatter signal from the ROI was obtained and use of ?{sup }{sub fat} in a WAXS fat subtraction model provided a way to estimate the differential linear scattering coefficient ?{sub s} of the remaining fatless tissue. Methods: The efficacy of the method was tested using animal tissue from a local butcher shop. Formalin fixed samples, 5 mm in diameter 4 mm thick, were prepared. The two main tissue types were fat and meat (fibrous). Pure as well as composite samples consisting of a mixture of the two tissue types were analyzed. For the latter samples, ?{sub fat} for the tissue columns of interest were extracted from corresponding pixels in CCD digital x-ray images using a calibration curve. The means ?{sup }{sub fat} were then calculated for use in a WAXS fat subtraction model. For the WAXS measurements, the samples were interrogated with a 2.7 mm diameter 50 kV beam and the 6 scattered photons were detected with a CdTe detector subtending a solid angle of 7.75 10{sup ?5} sr. Using the scatter spectrum, an estimate of the incident spectrum, and a scatter model, ?{sub s} was determined for the tissue in the ROI. For the composite samples, a WAXS fat subtraction model was used to estimate the ?{sub s} of the fibrous tissue in the ROI. This signal was compared to ?{sub s} of fibrous tissue obtained using a pure fibrous sample. Results: For chicken and beef composites, ?{sup }{sub fat}=0.330.05 and 0.32 0.05, respectively. The subtractions of these fat components from the WAXS composite signals provided estimates of ?{sub s} for chicken and beef fibrous tissue. The differences between the estimates and ?{sub s} of fibrous obtained with a pure sample were calculated as a function of the momentum transfer x. A t-test showed that the mean of the differences did not vary from zero in a statistically significant way thereby validating the methods. Conclusions: The methodology to estimate ?{sup }{sub fat} in a ROI of a tissue sample via CCD x-ray imaging was quantitatively accurate. The WAXS fat subtraction model allowed ?{sub s} of fibrous tissue to be obtained from a ROI which had some fat. The fat estimation method coupled with the WAXS models can be used to compare ?{sub s} coefficients of fibroglandular and cancerous breast tissue.

  12. Facility Decontamination and Decommissioning Program Surveillance and Maintenance Plan, Revision 2

    SciTech Connect (OSTI)

    Poderis, Reed J.; King, Rebecca A.

    2013-09-30

    This Surveillance and Maintenance (S&M) Plan describes the activities performed between deactivation and final decommissioning of the following facilities located on the Nevada National Security Site, as documented in the Federal Facility Agreement and Consent Order under the Industrial Sites program as decontamination and decommissioning sites: ? Engine Maintenance, Assembly, and Disassembly (EMAD) Facility: o EMAD Building (Building 25-3900) o Locomotive Storage Shed (Building 25-3901) ? Test Cell C (TCC) Facility: o Equipment Building (Building 25-3220) o Motor Drive Building (Building 25-3230) o Pump Shop (Building 25-3231) o Cryogenic Lab (Building 25-3232) o Ancillary Structures (e.g., dewars, water tower, piping, tanks) These facilities have been declared excess and are in various stages of deactivation (low-risk, long-term stewardship disposition state). This S&M Plan establishes and implements a solid, cost-effective, and balanced S&M program consistent with federal, state, and regulatory requirements. A graded approach is used to plan and conduct S&M activities. The goal is to maintain the facilities in a safe condition in a cost-effective manner until their final end state is achieved. This plan accomplishes the following: ? Establishes S&M objectives and framework ? Identifies programmatic guidance for S&M activities to be conducted by National Security Technologies, LLC, for the U.S. Department of Energy, National Nuclear Security Administration Nevada Field Office (NNSA/NFO) ? Provides present facility condition information and identifies hazards ? Identifies facility-specific S&M activities to be performed and their frequency ? Identifies regulatory drivers, NNSA/NFO policies and procedures, and best management practices that necessitate implementation of S&M activities ? Provides criteria and frequencies for revisions and updates ? Establishes the process for identifying and dispositioning a condition that has not been previously identified or documented ? Provides instructions for implementing annual S&M inspections and activities The following facilities that were included in Revision 1 of this plan have reached final disposition and are no longer in the S&M program: ? Reactor Maintenance, Assembly, and Disassembly Facility, Building 25-3110 ? Test Cell A Facility, Building 25-3113 ? TCC Facility, Building 25-3210 ? Pluto Disassembly Facility, Building 26-2201 ? Super Kukla Facility, Building 27-5400

  13. Application of Two Phase (Liquid/Gas) Xenon Gamma-Camera for the Detection of Special Nuclear Material and PET Medical Imaging

    SciTech Connect (OSTI)

    McKinsey, Daniel Nicholas

    2013-08-27

    The McKinsey group at Yale has been awarded a grant from DTRA for the building of a Liquid Xenon Gamma Ray Color Camera (LXe-GRCC), which combines state-of-the-art detection of LXe scintillation light and time projection chamber (TPC) charge readout. The DTRA application requires a movable detector and hence only a single phase (liquid) xenon detector can be considered in this case. We propose to extend the DTRA project to applications that allow a two phase (liquid/gas) xenon TPC. This entails additional (yet minimal) hardware and extension of the research effort funded by DTRA. The two phase detector will have better energy and angular resolution. Such detectors will be useful for PET medical imaging and detection of special nuclear material in stationary applications (e.g. port of entry). The expertise of the UConn group in gas phase TPCs will enhance the capabilities of the Yale group and the synergy between the two groups will be very beneficial for this research project as well as the education and research projects of the two universities. The LXe technology to be used in this project has matured rapidly over the past few years, developed for use in detectors for nuclear physics and astrophysics. This technology may now be applied in a straightforward way to the imaging of gamma rays. According to detailed Monte Carlo simulations recently performed at Yale University, energy resolution of 1% and angular resolution of 3 degrees may be obtained for 1.0 MeV gamma rays, using existing technology. With further research and development, energy resolution of 0.5% and angular resolution of 1.3 degrees will be possible at 1.0 MeV. Because liquid xenon is a high density, high Z material, it is highly efficient for scattering and capturing gamma rays. In addition, this technology scales elegantly to large detector areas, with several square meter apertures possible. The Yale research group is highly experienced in the development and use of noble liquid detectors for astrophysics, most recently in the XENON10 experiment. The existing facilities at Yale are fully adequate for the completion of this project. The facilities of the UConn group at the LNS at Avery Point include a (clean) lab for detector development and this group recently delivered an Optical Readout TPC (O-TPC) for research in Nuclear Astrophysics at the TUNL in Duke University. The machine shop at UConn will be used (free of charge) for producing the extra hardware needed for this project including grids and frames.

  14. Transportation Statistics Annual Report 1997

    SciTech Connect (OSTI)

    Fenn, M.

    1997-01-01

    This document is the fourth Transportation Statistics Annual Report (TSAR) prepared by the Bureau of Transportation Statistics (BTS) for the President and Congress. As in previous years, it reports on the state of U.S. transportation system at two levels. First, in Part I, it provides a statistical and interpretive survey of the systemits physical characteristics, its economic attributes, aspects of its use and performance, and the scale and severity of unintended consequences of transportation, such as fatalities and injuries, oil import dependency, and environment impacts. Part I also explores the state of transportation statistics, and new needs of the rapidly changing world of transportation. Second, Part II of the report, as in prior years, explores in detail the performance of the U.S. transportation system from the perspective of desired social outcomes or strategic goals. This year, the performance aspect of transportation chosen for thematic treatment is Mobility and Access, which complements past TSAR theme sections on The Economic Performance of Transportation (1995) and Transportation and the Environment (1996). Mobility and access are at the heart of the transportation systems performance from the users perspective. In what ways and to what extent does the geographic freedom provided by transportation enhance personal fulfillment of the nations residents and contribute to economic advancement of people and businesses? This broad question underlies many of the topics examined in Part II: What is the current level of personal mobility in the United States, and how does it vary by sex, age, income level, urban or rural location, and over time? What factors explain variations? Has transportation helped improve peoples access to work, shopping, recreational facilities, and medical services, and in what ways and in what locations? How have barriers, such as age, disabilities, or lack of an automobile, affected these accessibility patterns? How are commodity flows and transportation services responding to global competition, deregulation, economic restructuring, and new information technologies? How do U.S. patterns of personal mobility and freight movement compare with other advanced industrialized countries, formerly centrally planned economies, and major newly industrializing countries? Finally, how is the rapid adoption of new information technologies influencing the patterns of transportation demand and the supply of new transportation services? Indeed, how are information technologies affecting the nature and organization of transportation services used by individuals and firms?

  15. QER- Comment of Liberty Goodwin

    Broader source: Energy.gov [DOE]

    As suggested by Sen. Jack Reed, below and attached are my comments on energy policy for now and the future: ***************************************************************************** AN OUTLINE FOR PRACTICAL & FRUITFUL ENERGY DEVELOPMENT WITH SPECIAL ATTENTION TO SENSIBLE PUBLIC INVESTMENT (Thoughts on intelligent action for energy that is abundant, affordable, associated with many jobs and economic health in New England and the nation) ** CLINGING TO OUTMODED & DESTRUCTIVE TECHNOLOGIES – WE DON'T NEED TO ARGUE ABOUT CLIMATE CHANGE TO SEE THE WAY FORWARD 1. Fossil fuels and nuclear have clear and present dangers and damaging effects, on human and environmental health. This includes the uncontestable pollution involved in production and use, and the risks of greater disasters, along with concerns about toxic waste that can contaminate our water and more. 2. Renewable sources offer a vast number of possibilities for energy production for a variety of uses. To not explore them is wasteful. To stick to same-old, same-old is foolish, and will leave us at the rear of the pack re: future energy development. **SMALL IS BEAUTIFUL – LESS RISKY – MORE PRODUCTIVE – MORE LOCAL 1 Solyndra is the bad apple that makes the point. Because something costs millions, or even billions of dollars doesn't mean it is the way to achieve huge results. The only thing that is huge about propping up mega-corporations is the risk. 2 Making the money available in far smaller amounts to a variety of solar efforts is both less risky and more promising – gives more chance of positive results. And, to anyone who can do the math – millions of small installations is as productive as one giant. 3 Smaller projects tend to be more labor-intensive – and offer local employment in a bunch of different places, benefiting the economies of all. **BENEFICIAL INNOVATION IS NOT BORN IN A CORPORATE THINK TANK, BUT IN THE MINDS OF INDIVIDUAL GENIUSES. 1. History tells us that great inventions have been developed by unknowns working in garages, bike shops, etc. We need to look beyond the elite in corporate money tanks and prestigious academia to find the gems in our own backyards. 2. One such, Paul Klinkman, has at least 50 inventions on hand, is developing several, has one patent and a few more in process, most related to alternative energy production. 3. The point is that we would find many like him – if we would only look. 4. Also, we should be seeking not just new technologies, but new business models. Check out the example from our greenhouse flyer, below. **SAVVY INVESTORS DON'T PUT THE BULK OF THEIR FORTUNES IN JUST A COUPLE OF STOCKS. THEY SPREAD THE RISK BY DIVERSIFYING. LET US BE LIKEWISE SMART IN USE OF PUBLIC MONEY 1 "Renewable energy" is not just about electricity, or even that and hot water. It is not even just those and wind, and certainly more than "solar panels". 2 We need to explore and use the many different types of alternatives, just as we do in most other aspects of our society. 3 Taking the kind of money that was allocated to Solyndra (or even to 38 Studios here in Rhode Island, and instead investing it in even 10 small projects, is a much wiser choice than betting it on another big boondoggle. **WHAT TO DO? PUT OUR MONEY INTO SUPPORT FOR WIDESPREAD USE OF CURRENT "GREEN" ENERGY TECHNOLOGY, AND EVALUATION & DEVELOPMENT OF NEW, TRULY INNOVATIVE OPTIONS 1 Make renewable energy credits available for all solar, wind and other technologies that show promise for meeting our energy needs. 2 Consider setting up an Important Innovations Center like the one described on the other side. TWO EXAMPLES OF NEW & EXCITING RESEARCH & BUSINESS MODELS A. PROPOSED NEW KSD NON-PROFIT IMPORTANT INNOVATIONS CENTER PURPOSES **Provide a place where small inventors can get help in evaluating and developing their ideas. **Provide a place which will focus specifically on inventions that have the potential to benefit the world and its people. **Provide a place which will especially focus on solutions to energy needs – and to environmental pollution and other damage. **Provide a place to enable people interested in doing good rather than getting rich to network and cooperate on accomplishing this kind of change in our world. MEANS **Invite ideas to be submitted and considered. **Focus on those inventors who don't have a large corporation or prestigious university behind them. **Vet the submissions for both efficacy and social value. **Locate funding sources that will support such work. **Locate local and regional businesses interested in marketing and/or manufacturing new and beneficial designs and products. **Connect resources with inventors and their ideas. **Support projects that utilize such innovations for good. WHAT NOT TO DO: Turn these to large multi-national corporations to exploit for their own gain. ****************************************************************************** **** B. THE UNIQUE KSD BUSINESS MODEL FOR SOLAR GREENHOUSE DEVELOPMENT **Provide a KSD design package kit that will allow farmers & other handy people to build their own greenhouses **Include expert consultation & tech support to assist them throughout the process of building.. **Train able local people as helpers to do the on-site assistance in various parts of the country. **Provide training to locally owned small businesses such as sheet metal shops to manufacture desired parts, such as the solar concentrating collectors. **Work to develop a network of local resources that could market, manufacture & install greenhouses. Some might also produce & sell biofuel from algae. **Include non-profit organizations, as partners that could raise money from selling the kits & subsidize or give units to community gardens, food banks, etc.) **Develop a residential version that could provide gardening & sun space, as well as supplementary heat to an adjacent house. ****************************************************************************** ********* SUBMITTED BY: LIBERTY GOODWIN, CO-OWNER, (WITH PAUL KLINKMAN) KLINKMAN SOLAR DESIGN (KSD), P.O. Box 40572, Providence, RI 02940, Tel. 401-351-9193, E-Mail: info@klinkmansolar.com, Website: www.klinkmansolar.com ******************************************************************************

  16. Dubose CRADA

    SciTech Connect (OSTI)

    Schuttler, G.L.

    2000-01-25

    In phase one of this project, Mr. Dubose needed assistance to evaluate his Minimal Crevice Volume (MCV) Piston Ring concept to see if it showed enough technical merit to warrant the expenditure of time and money into patenting the concept and commercializing it. He initially enlisted the help of Texas Tech University, and subsequently Honeywell FM and T, to evaluate the concept for technical feasibility. This evaluation included engineering evaluations of the concept's functionality and manufacturability, along with design analysis and refinement through finite element analysis and other methods. The Principal Investigator at FM and T (Greg Schuttler) and Dr. Maxwell at Texas Tech provided feedback to Mr. Dubose on the functional feasibility of the concept, and the Principal Investigator at FM and T provided manufacturability guidance. Dr. Maxwell had engineering students and a graduate student at Texas Tech conduct static finite element studies to further evaluate the concept; and an extensive dynamic finite element evaluation of the concept, including design refinement, was carried out at FM and T by the Principal Investigator and Jim Mahoney. The results of the FM and T finite element analysis were used as a justification for Mr. Dubose to pursue patent application for this concept. The dynamic finite element study pushed the state-of-the-art for this type of study at FM and T. It also served as a vehicle to facilitate the familiarization of FM and T associates outside the Finite Elements group in Engineering with finite element techniques and capabilities, a plant goal. In phase two of this project, Mr. Dubose was attempting to prove the viability of his already patented ''Variable Orbital Aperture'' concept. All three of the major US automotive corporations had expressed an interest in Mr. Dubose's multiple valve disc concept, if it could be proven that an effective sealing method could be found, since rotary valve engines have historically been nearly impossible to seal. To accomplish this, Mr. Dubose proposed to build a functional single-disc cylinder head to try different seal designs. Texas Tech had a Kawasaki single cylinder engine that was suitable for this use, and it was decided that a rotary valve cylinder head would be fabricated to fit this engine. To this end, Texas Tech provided assistance in creating the cylinder head design, assisted by Honeywell FM and T. Several design iterations were created, and both wax and stereolithography models were created at FM and T to assist the design process. The wax and stereolithography models were used for conceptual visualization of the designs, fit-up checks of the various components with the actual engine, and even flow testing of the intake and exhaust ports. When the design was finalized, two prototype cylinder head assemblies were machined, from aluminum and steel supplied by Texas Tech and Mr. Dubose, in the FM and T Model Shop. The engine was then to be assembled and tested at Texas Tech. At the time that this project was closed, the engine had not yet been completely assembled and tested.

  17. Annual Site Environmental Report, 2007(ASER)

    SciTech Connect (OSTI)

    Sabba, D

    2008-10-07

    This report provides information about environmental programs during the calendar year (CY) of 2007 at the Stanford Linear Accelerator Center (SLAC), Menlo Park, California. Activities that span the calendar year, i.e., stormwater monitoring covering the winter season of 2007/2008 (October 2007 through May 2008), are also included. Production of an annual site environmental report (ASER) is a requirement established by the United States Department of Energy (DOE) for all management and operating (M&O) contractors throughout the DOE complex. SLAC is a federally-funded research and development center with Stanford University as the M&O contractor. Under Executive Order (EO) 13423 and DOE Order 450.1, 'Environmental Protection Program', SLAC effectively implemented and integrated the key elements of an Environmental Management System (EMS) to achieve the site's integrated safety and environmental management system goals. For normal daily activities, SLAC managers and supervisors are responsible for ensuring that policies and procedures are understood and followed so that: (1) Worker safety and health are protected; (2) The environment is protected; and (3) Compliance is ensured. Throughout 2007, SLAC focused on development and implementation of SLAC management systems to ensure continual improvement. These systems provided a structured framework for SLAC to implement 'greening of the government' initiatives such as EO 13148. Overall, management systems at SLAC are effective, supporting compliance with all relevant statutory and regulatory requirements. SLAC continues to demonstrate significant progress in implementing and integrating EMS into day-to-day operations at SLAC. The annual management review and ranking of environmental aspects were completed this year by SLAC's EMS Steering Committee, the Environmental Safety Committee (ESC) and thirteen objectives and targets were established for 2007. For each objective and target, a work plan, or Environmental Management Program (EMP) was completed and progress reports were routinely provided to SLAC senior management. During 2007, there were no reportable releases to the environment from SLAC operations. In addition, many improvements in waste minimization, recycling, stormwater management, groundwater restoration, and SLAC's chemical management system (CMS) were continued during 2007. SLAC replaced two process tanks at the Plating Shop which previously contained chromium solutions with non-chromium containing solutions, reducing the overall use of hazardous chemicals. In addition, 346 polychlorinated biphenyl (PCB)-contaminated capacitors were replaced with non-PCB capacitors, reducing the potential of a release of oil with PCBs during an event such as a fire or an earthquake. SLAC operates its industrial and sanitary wastewater management program in compliance with established permit conditions. During 2007, SLAC obtained a new facility-wide wastewater discharge permit which replaced four separate permits that were previously issued to SLAC. In 2007, no radiological incidents occurred that increased radiation levels or released radioactivity to the environment. In addition to managing its radioactive wastes safely and responsibly, SLAC worked to reduce the amount of waste generated. SLAC has implemented programs and systems to ensure compliance with all radiological requirements related to the environment. Specifically, the Radiation Protection Radiological Waste Management (RPRWM) Group developed a training course to certify Radioactive Waste Generators, conducted a training pilot, and developed a list of potential radioactive waste generators to train. In 2007, the SLAC Environmental Restoration Program continued work on site characterization and evaluation of remedial alternatives at four sites with volatile organic compounds in groundwater and several areas with polychlorinated biphenyls and low concentrations of lead in soil. SLAC is regulated under a site cleanup requirements order (board order) issued by the California Regional Water Quality Control Board (RWQCB), San Francisco Bay Region in May 2005 for the investigation and remediation of impacted soil and groundwater at SLAC. The board order lists specific tasks and deadlines for completion of groundwater and soil characterization and other remediation activities. All 2007 submittals to the RWQCB were completed and submitted on time.

  18. Deterministic, Nanoscale Fabrication of Mesoscale Objects

    SciTech Connect (OSTI)

    Jr., R M; Shirk, M; Gilmer, G; Rubenchik, A

    2004-09-24

    Neither LLNL nor any other organization has the capability to perform deterministic fabrication of mm-sized objects with arbitrary, {micro}m-sized, 3-dimensional features with 20-nm-scale accuracy and smoothness. This is particularly true for materials such as high explosives and low-density aerogels. For deterministic fabrication of high energy-density physics (HEDP) targets, it will be necessary both to fabricate features in a wide variety of materials as well as to understand and simulate the fabrication process. We continue to investigate, both in experiment and in modeling, the ablation/surface-modification processes that occur with the use of laser pulses that are near the ablation threshold fluence. During the first two years, we studied ablation of metals, and we used sub-ps laser pulses, because pulses shorter than the electron-phonon relaxation time offered the most precise control of the energy that can be deposited into a metal surface. The use of sub-ps laser pulses also allowed a decoupling of the energy-deposition process from the ensuing movement/ablation of the atoms from the solid, which simplified the modeling. We investigated the ablation of material from copper, gold, and nickel substrates. We combined the power of the 1-D hydrocode ''HYADES'' with the state-of-the-art, 3-D molecular dynamics simulations ''MDCASK'' in our studies. For FY04, we have stretched ourselves to investigate laser ablation of carbon, including chemically-assisted processes. We undertook this research, because the energy deposition that is required to perform direct sublimation of carbon is much higher than that to stimulate the reaction 2C + O{sub 2} => 2CO. Thus, extremely fragile carbon aerogels might survive the chemically-assisted process more readily than ablation via direct laser sublimation. We had planned to start by studying vitreous carbon and move onto carbon aerogels. We were able to obtain flat, high-quality vitreous carbon, which was easy to work on, experimentally and relatively easy to model. We were provided with bulk samples of carbon aerogel by Dr. Joe Satcher, but the shop that would have prepared mounted samples for us was overwhelmed by programmatic assignments. We are pursuing aligned carbon nanotubes, provided to us by colleagues at NASA Ames Research Center, as an alternative to aerogels. Dr. Gilmer started modeling the laser/thermally accelerated reactions of carbon with H{sub 2}, rather than O{sub 2}, due to limited information on equation of state for CO. We have extended our molecular dynamics models of ablation to include carbon in the form of graphite, vitreous carbon, and aerogels. The computer code has features that allow control of temperature, absorption of shock waves, and for the ejection of material from the computational cell. We form vitreous carbon atomic configurations by melting graphite in a microcanonical cell at a temperature of about 5000K. Quenching the molten carbon at a controlled rate of cooling yields material with a structure close to that of the vitreous carbon produced in the laboratory. To represent the aerogel, we have a computer code that connects ''graphite'' rods to randomly placed points in the 3-D computational cell. Ablation simulations yield results for vitreous carbon similar to our previous results with copper, usually involving the transient melting of the material above the threshold energy density. However, some fracturing in the solid regions occurs in this case, but was never observed in copper. These simulations are continuing, together with studies of the reaction of hydrogen with vitreous graphite at high temperatures. These reactions are qualitatively similar to that of oxygen with the carbon atoms at the surface, and the simulations should provide insight into the applicability of the use of chemical reactions to shape the surfaces of aerogels.

  19. Eight plane IPND mechanical testing.

    SciTech Connect (OSTI)

    Zhao, A.; Guarino, V.; Wood, K.; Nephew, T.; Ayres, D.; Lee, A.; High Energy Physics; FNAL

    2008-03-18

    A mechanical test of an 8 plane IPND mechanical prototype, which was constructed using extrusions from the testing/tryout of the 16 cell prototype extrusion die in Argonne National Laboratory, was conducted. There were 4 vertical and 4 horizontal planes in this 8 plane IPND prototype. Each vertical plane had four 16 cell extrusions, while each horizontal plane had six 16 cell extrusions. Each plane was glued together using the formulation of Devcon adhesive, Devcon 60. The vertical extrusions used in the vertical planes shares the same dimensions as the horizontal extrusions in the horizontal planes with the average web thickness of 2.1 mm and the average wall thickness of 3.1 mm. This mechanical prototype was constructed with end-seals on the both ends of the vertical extrusions. The gaps were filled with epoxy between extrusions and end-seals. The overall dimension of IPND is 154.8 by 103.1 by 21.7 inches with the weight of approximately 1200 kg, as shown in a figure. Two similar mechanical tests of 3 layer and 11 layer prototypes have been done in order to evaluate the strength of the adhesive joint between extrusions in the NOvA detector. The test showed that the IPND prototype was able to sustain under the loading of weight of itself and scintillator. Two FEA models were built to verify the measurement data from the test. The prediction from FEA slice model seems correlated reasonably well to the test result, even under a 'rough' estimated condition for the wall thickness (from an untuned die) and an unknown property of 'garage type' extrusion. A full size of FEA 3-D model also agrees very well with the test data from strain gage readings. It is worthy to point out that the stress distribution of the structure is predominantly determined by the internal pressure, while the buckling stability relies more on the loading weight from the extrusions themselves and scintillate. Results of conducted internal pressure tests, including 3- cell, 11-cell and the IPND prototypes, have been correlated to the FEA analysis very well. The authors believe they have quite good understanding of response of the NOvA structures subjected to the internal pressure, while the understanding of buckling stability is far behind. Therefore, more effect should be laid to improve the buckling considering that the FEA analysis usually is not able accurately modeling the stability as good as the stress analysis. The IPND structure was mostly built using 'scrape' piece extrusions (whatever available in shop). Therefore, a future test should be more focus on by using a actual real extrusions, for example like Nova -27 (if a final choice is made) and extrusion from a tuned die (very important). The authors should/will repeat 11 layers test with an actual thicker piece for the vertical to verify the adhesive joint and similar large scale prototype with a symmetry case, either 9 or 11 layers with the dial indicator on the both side.

  20. Transportation Anslysis Simulation System

    Energy Science and Technology Software Center (OSTI)

    2004-08-23

    TRANSIMS version 3.1 is an integrated set of analytical and simulation models and supporting databases. The system is designed to create a virtual metropolitan region with representation of each of the region’s individuals, their activities and the transportation infrastructure they use. TRANSIMS puts into practice a new, disaggregate approach to travel demand modeling using agent-based micro-simulation technology. TRANSIMS methodology creates a virtual metropolitan region with representation of the transportation infrastructure and the population, at themore » level of households and individual travelers. Trips a planned to satisfy the population’s activity pattems at the individual traveler level. TRANSIMS then simulates the movement of travelers and vehicles across the transportation network using multiple modes, including car, transit, bike and walk, on a second-by-second basis. Metropolitan planners must plan growth of their cities according to the stringent transportation system planning requirements of the Interniodal Surface Transportation Efficiency Act of 1991, the Clean Air Act Amendments of 1990 and other similar laws and regulations. These require each state and its metropotitan regions to work together to develop short and long term transportation improvement plans. The plans must (1) estimate the future transportation needs for travelers and goods movements, (2) evaluate ways to manage and reduce congestion, (3) examine the effectiveness of building new roads and transit systems, and (4) limit the environmental impact of the various strategies. The needed consistent and accurate transportation improvement plans require an analytical capability that properly accounts for travel demand, human behavior, traffic and transit operations, major investments, and environmental effects. Other existing planning tools use aggregated information and representative behavior to predict average response and average use of transportation facilities. They do not account for individual traveler response to the dynamic transportation environment. In contrast, TRANSIMS provides disaggregated information that more explicitly represents the complex nature of humans interacting with the transportation system. It first generates a synthetic population that represents individuals and their households in the metropolitan region in a statistically valid way. The demographic makeup and spatial distribution of this synthetic population is derived from census data so that it matches that of the region’s real population. From survey data, a model is built of household and individual activities that may occur at home, in the workplace, school or shopping centers, for example. Trip plans including departure times, travel modes, and specific routes are created for each individual to get to his or her daily activities. TRANSIMS then simulates the movement of millions of individuals, following their trip plans throughout the transportation network, including their use of vehicles such as cars or buses, on a second-by-second basis. The virtual travel in TRANSIMS mimics the traveling and driving behavior of real people in the metropolitan region. The interactions of individual vehicles produce realistic traffic dynamics from which analysts can judge to performance of the transportation sysime and estimate vehicle emissions. Los Alamos, in cooperation with the Department of Transportation, Federal HIghway Administration and the local Metropolitan Planning Offices, has done TRANSIMS micro-simulations of auto traffic patterns in these two urban areas and completed associated scenario-based studies.« less

  1. MOLTEN CARBONATE FUEL CELL PRODUCT DESIGN IMPROVEMENT

    SciTech Connect (OSTI)

    H.C. Maru; M. Farooque

    2002-02-01

    The carbonate fuel cell promises highly efficient, cost-effective and environmentally superior power generation from pipeline natural gas, coal gas, biogas, and other gaseous and liquid fuels. FuelCell Energy, Inc. has been engaged in the development of this unique technology, focusing on the development of the Direct Fuel Cell (DFC{reg_sign}). The DFC{reg_sign} design incorporates the unique internal reforming feature which allows utilization of a hydrocarbon fuel directly in the fuel cell without requiring any external reforming reactor and associated heat exchange equipment. This approach upgrades waste heat to chemical energy and thereby contributes to a higher overall conversion efficiency of fuel energy to electricity with low levels of environmental emissions. Among the internal reforming options, FuelCell Energy has selected the Indirect Internal Reforming (IIR)--Direct Internal Reforming (DIR) combination as its baseline design. The IIR-DIR combination allows reforming control (and thus cooling) over the entire cell area. This results in uniform cell temperature. In the IIR-DIR stack, a reforming unit (RU) is placed in between a group of fuel cells. The hydrocarbon fuel is first fed into the RU where it is reformed partially to hydrogen and carbon monoxide fuel using heat produced by the fuel cell electrochemical reactions. The reformed gases are then fed to the DIR chamber, where the residual fuel is reformed simultaneously with the electrochemical fuel cell reactions. FuelCell Energy plans to offer commercial DFC power plants in various sizes, focusing on the subMW as well as the MW-scale units. The plan is to offer standardized, packaged DFC power plants operating on natural gas or other hydrocarbon-containing fuels for commercial sale. The power plant design will include a diesel fuel processing option to allow dual fuel applications. These power plants, which can be shop-fabricated and sited near the user, are ideally suited for distributed power generation, industrial cogeneration, marine applications and uninterrupted power for military bases. FuelCell Energy operated a 1.8 MW plant at a utility site in 1996-97, the largest fuel cell power plant ever operated in North America. This proof-of-concept power plant demonstrated high efficiency, low emissions, reactive power control, and unattended operation capabilities. Drawing on the manufacture, field test, and post-test experience of the full-size power plant; FuelCell Energy launched the Product Design Improvement (PDI) program sponsored by government and the private-sector cost-share. The PDI efforts are focused on technology and system optimization for cost reduction, commercial design development, and prototype system field trials. The program was initiated in December 1994. Year 2000 program accomplishments are discussed in this report.

  2. Building Toxic Metal Characterization and Decontamination Report: Area 6, Building 914

    SciTech Connect (OSTI)

    NSTec Industrial Hygiene

    2011-08-15

    The purpose of this report is to outline the toxic metal characterization and decontamination efforts in Area 6, Building 914. This includes the initial building inspection, the hotspot sampling, results/findings, building cleanup, and the verification sampling. Building 914 is a steel light frame building that was constructed in 1992. It is about 16,454 square feet, and five employees are assigned to this building. According to the building's floor plan blueprints, it could be inferred that this building was once a Wiremen/Lineman shop. In 2002-2004, the National Nuclear Security Administration Nevada Site Office embarked on a broad characterization of beryllium (Be) surface concentrations throughout the North Las Vegas Facility, the Nevada National Security Site (NNSS), and ancillary facilities like the Special Technologies Laboratory, Remote Sensing Laboratory, etc. Building 914 was part of this characterization. The results of the 2002 study illustrated that the metal housekeeping limits were within acceptable limits and from a Be standpoint, the building was determined to be fit for occupancy. On March 2, 2011, based on a request from Building 914 users, National Security Technologies, LLC (NSTec) Industrial Hygiene (IH) collected bulk samples from the southwest corner of Building 914 at heights above 6 feet where black dust had been noticed on this particular wall. IH conducted surface swipe sampling of the area and analyzed the samples for toxic metals, namely, beryllium (Be), cadmium (Cd), chromium (Cr), lead (Pb), and manganese (Mn). The sample results indicated values two to four times above the housekeeping threshold for Be, Cd, Cr, Pb, and Mn. Subsequently, the facility was closed and posted; the necessary personnel were notified; and controls were instituted for ingress and egress of the building. On March 17, 2011, IH performed an extensive sampling event involving the entire warehouse in accordance with NSTec Organization Procedure OP-P250.004, Sampling Procedures. Analysis of the results from this exercise illustrated that toxic metal contamination was ubiquitous throughout the warehouse section of this building but did not extend into the office, restroom, and break room areas. On March 22, 2011, a planning meeting was held with Environment, Safety, Health & Quality management; Operations & Infrastructure (O&I) mangement; Facility Management; Occupational Medicine; O&I Operations; and IH. After a brief discussion concerning the salient facts of the surface sample results, it was agreed that the facility and its contents required cleaning. The facility would then be re-sampled to verify cleanliness and suitability for re-occupancy. On April 18, 2011, warehouse cleanup activites began. On July 5, 2011, upon receipt of the results from the last cleaned section, the cleanup operations were concluded. The building was statistically determined to be clean; thus, it could be reoccupied and the warehouse operations could resume immediately.

  3. Fiscal Year 2008 Phased Construction Completion Report for EU Z2-33 in Zone 2, East Tennessee Technology Park, Oak Ridge, Tennessee

    SciTech Connect (OSTI)

    Bechtel Jacobs

    2008-09-11

    The Record of Decision for Soil, Buried Waste, and Subsurface Structure Actions in Zone 2, East Tennessee Technology Park, Oak Ridge, Tennessee (DOE/OR/01-2161&D2) (Zone 2 ROD) acknowledged that most of the 800 acres in Zone 2 were contaminated, but that sufficient data to confirm the levels of contamination were lacking. The Zone 2 ROD further specified that a sampling strategy for filling the data gaps would be developed. The Remedial Design Report/Remedial Action Work Plan for Zone 2 Soils, Slabs, and Subsurface Structures, East Tennessee Technology Park, Oak Ridge, Tennessee (DOE/OR/01-2224&D3) (Zone 2 RDR/RAWP) defined the sampling strategy as the Dynamic Verification Strategy (DVS), generally following the approach used for characterization of the Zone 1 exposure units (EUs). The Zone 2 ROD divided the Zone 2 area into seven geographic areas and 44 EUs. To facilitate the data quality objectives (DQOs) of the DVS process, the Zone 2 RDR/RAWP regrouped the 44 EUs into 12 DQO scoping EU groups. These groups facilitated the DQO process by placing similar facilities and their support facilities together and allowing identification of data gaps. The EU groups were no longer pertinent after DQO planning was completed and characterization was conducted as areas became accessible. As the opportunity to complete characterization became available, the planned DVS program and remedial actions (RAs) were completed for EU Z2-33. Remedial action was also performed at two additional areas in adjacent EU Z2-42 because of their close proximity and similar nature to a small surface soil RA in EU Z2-33. Remedial actions for building slabs performed in EU Z2-33 during fiscal year (FY) 2007 were reported in the Fiscal Year 2007 Phased Construction Completion Report for the Zone 2 Soils, Slabs, and Subsurface Structures at East Tennessee Technology Park, Oak Ridge, Tennessee (DOE/OR/01-2723&D1). Recommended RAs for EU Z2-42 were described in the Fiscal Year 2006 Phased Construction Completion Report for the Zone 2 Soils, Slabs, and Subsurface Structures at East Tennessee Technology Park, Oak Ridge, Tennessee (DOE/OR/01-2317&D2). Remedial actions performed in the Balance of Site (BOS) Laboratory Area of EU Z2-33 and two small areas in EU Z2-42 are described in Sects. 5 through 10 of this Phased Construction Completion Report (PCCR). The purpose of this PCCR is to address the following: (1) Document DVS characterization results for EU Z2-33; (2) Describe and document the risk evaluation and determine if the EU meets the Zone 2 ROD requirements for unrestricted industrial use to 10 ft bgs; (3) Identify additional areas not defined in the Zone 2 ROD that require remediation based on the DVS evaluation results; and (4) Describe RAs performed in the EU Z2-33 BOS Laboratory Area and two small areas in EU Z2-42. Approximately 18 acres in EU Z2-33 are addressed in this PCCR. Based on the results of the DVS evaluation and RAs performed, all 18 acres are recommended for unrestricted industrial use to 10 ft bgs. Three Federal Facility Agreement sites are addressed and recommended for no further action within this acreage, including: (1) K-1004-L Recirculating Cooling Water Lines Leak Sites; (2) K-1044 Heavy Equipment Repair Shop; and (3) K-1015-A Laundry Pit. Remedial actions for EU Z2-33 were developed in response to DVS characterization results described in the EU Z2-33 Technical Memorandum (Appendix A) and to support reindustrialization of the East Tennessee Technology Park as a commercial industrial park. Remediation criteria were designed for the protection of a future industrial worker who normally would not have the potential for exposure to soil below 10ft bgs. Accordingly, the Zone 2 ROD required land use controls to prevent disturbance of soils below 10 ft deep and to restrict future land use to industrial/commercial activities. In response to stakeholder comments, the U.S. Department of Energy agreed to re-evaluate the need for such land use restrictions. This document includes a screening evaluation to determine the likelihood of land use controls in EU Z2-33 being modified to: (1) eliminate the restriction on disturbance of soils below 10 ft bgs where data indicate the absence of residual contamination at any depth that would result in an unacceptable risk to the future industrial worker, and (2) permit alternative land uses that would be protective of future site occupants. Results of this screening evaluation indicate a low probability that restrictions on disturbing soil below 10 ft bgs could be safely eliminated for EU Z2-33. A qualitative screening evaluation considered the likelihood of unrestricted land use being protective of future site occupants. Based on this qualitative assessment, all 18 acres addressed in this PCCR were assigned a low probability for consideration of release for unrestricted land use.

  4. Final Technical Report: Intensive Quenching Technology for Heat Treating and Forging Industries

    SciTech Connect (OSTI)

    Aronov, Michael A.

    2005-12-21

    Intensive quenching (IQ) process is an alternative way of hardening (quenching) steel parts through the use of highly agitated water and then still air. It was developed by IQ Technologies, Inc. (IQT) of Akron, Ohio. While conventional quenching is usually performed in environmentally unfriendly oil or water/polymer solutions, the IQ process uses highly agitated environmentally friendly water or low concentration water/mineral salt solutions. The IQ method is characterized by extremely high cooling rates of steel parts. In contrast to conventional quenching, where parts cool down to the quenchant temperature and usually have tensile or neutral residual surface stresses at the end of quenching. The IQ process is interrupted when the part core is still hot and when there are maximum compressive stresses deep into the parts, thereby providing hard, ductile, better wear resistant parts. The project goal was to advance the patented IQ process from feasibility to commercialization in the heat-treating and forging industries to reduce significantly energy consumption and environmental impact, to increase productivity and to enhance economic competitiveness of these industries as well as Steel, Metal Casting and Mining industries. To introduce successfully the IQ technology in the U.S. metal working industry, the project team has completed the following work over the course of this project: A total of 33 manufacturers of steel products provided steel parts for IQ trails. IQT conducted IQ demonstrations for 34 different steel parts. Our customers tested intensively quenched parts in actual field conditions to evaluate the product service life and performance improvement. The data obtained from the field showed the following: Service life (number of holes punched) of cold-work punches (provided by EHT customer and made of S5 shock-resisting steel) was improved by two to eight times. Aluminum extrusion dies provided by GAM and made of hot work H-13 steel outperformed the standard dies by at least 50%. Dies provided by an AST customer, made of plain carbon 1045 steel and used for pellet manufacturing outperformed the standard dies by more than 100%. Concrete crusher liner wear plates provided by an EHT customer and made of 1045 steel, had the same surface hardness as the plates made of more expensive, pre-hardened high alloy HARDOX-500 material supplied by a Swedish company and used currently by the EHT customer. The 1045 material intensively quenched wear plates are currently in the field. Concrete block molding machine wear plates provided by an IQT customer and made of 8620 steel were processed at the AST production IQ system using a 40% reduced carburization cycle. An effective case depth in the intensively quenched wear plates was the same as in the standard, oil quenched parts. Base keys provided by an EHT customer and made of 8620 steel were processed using a 40% reduced carburization cycle. The intensively quenched parts showed the same performance as standard parts. IQT introduced the IQ process in heat treat practices of three commercial heat-treating shops: Akron Steel Treating Co., Summit Heat Treating Co. and Euclid Heat Treating Co. CWRU conducted a material characterization study for a variety of steels to develop a database to support changing/modification of recognized standards for quenching steel parts. IQT conducted a series of IQ workshops, published seven technical papers and participated in ASM Heat Treating Society conference and exposition and in Furnace North America Show. IQT designed and built a fully automated new IQ system installed at the Center for Intensive Quenching. This system includes the following major components: a stand-alone 1,900-gallon IQ water system, a 24'' x 24'' atmosphere pit furnace, and an automated load transfer mechanism. IQT established a ''Center for Intensive Quenching'' at the AST facilities. The 4,000 square feet Center includes the following equipment: High-velocity single part quenching IQ unit developed and built previously under EMTEC CT-65 project. The unit is equipped w