National Library of Energy BETA

Sample records for analytical querying capabilities

  1. Hanford transuranic analytical capability

    SciTech Connect (OSTI)

    McVey, C.B.

    1995-02-24

    With the current DOE focus on ER/WM programs, an increase in the quantity of waste samples that requires detailed analysis is forecasted. One of the prime areas of growth is the demand for DOE environmental protocol analyses of TRU waste samples. Currently there is no laboratory capacity to support analysis of TRU waste samples in excess of 200 nCi/gm. This study recommends that an interim solution be undertaken to provide these services. By adding two glove boxes in room 11A of 222S the interim waste analytical needs can be met for a period of four to five years or until a front end facility is erected at or near the 222-S facility. The yearly average of samples is projected to be approximately 600 samples. The figure has changed significantly due to budget changes and has been downgraded from 10,000 samples to the 600 level. Until these budget and sample projection changes become firmer, a long term option is not recommended at this time. A revision to this document is recommended by March 1996 to review the long term option and sample projections.

  2. Query optimization for graph analytics on linked data using SPARQL

    SciTech Connect (OSTI)

    Hong, Seokyong; Lee, Sangkeun; Lim, Seung -Hwan; Sukumar, Sreenivas R.; Vatsavai, Ranga Raju

    2015-07-01

    Triplestores that support query languages such as SPARQL are emerging as the preferred and scalable solution to represent data and meta-data as massive heterogeneous graphs using Semantic Web standards. With increasing adoption, the desire to conduct graph-theoretic mining and exploratory analysis has also increased. Addressing that desire, this paper presents a solution that is the marriage of Graph Theory and the Semantic Web. We present software that can analyze Linked Data using graph operations such as counting triangles, finding eccentricity, testing connectedness, and computing PageRank directly on triple stores via the SPARQL interface. We describe the process of optimizing performance of the SPARQL-based implementation of such popular graph algorithms by reducing the space-overhead, simplifying iterative complexity and removing redundant computations by understanding query plans. Our optimized approach shows significant performance gains on triplestores hosted on stand-alone workstations as well as hardware-optimized scalable supercomputers such as the Cray XMT.

  3. ISABELA-QA: query-driven analytics with ISABELA-compressed extreme-scale

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    scientific data | Argonne Leadership Computing Facility ISABELA-QA: query-driven analytics with ISABELA-compressed extreme-scale scientific data Authors: Lakshminarasimhan,S., Jenkins, J., Latham,R., Samatova, N.F., Arkatkar, I., Gong, Z., Kolla, H., Chen, J., Ku, S.H. Chang, C.S., Ethier, S., Klasky, S. Efficient analytics of scientific data from extreme-scale simulations is quickly becoming a top-notch priority. The increasing simulation output data sizes demand for a paradigm shift in how

  4. Existing technology transfer report: analytical capabilities. Appendix B. Volume 3

    SciTech Connect (OSTI)

    Tewari, K.C.

    1984-06-01

    The overall objective of the on-going analytical efforts was to develop in-house expertise and analytical capability for the analysis of coal and coal-derived products in support of SRC-I process technology. The approach taken and work accomplished involved: identification of test methods and associated equipment; review and implementation of analytical facility plan; evaluation of existing instrumentation; evaluation and purchase of new instruments; training of laboratory personnel; validation or development of analytical methods; development of standard product work-up methods and development of analytical protocol for detailed characterization of SRC-I solid and liquid products. This volume contains Appendix B with the following attachments: solvent separation procedure A; Wilsonville solvent separation procedure, distillation separation procedure; solvent separation modified Wilsonville Procedure W; statistical comparison of 3 solvent separation procedures; methods development for column chromatography, and application of gas chromatography to characterization of a hydrogen donor solvent; and high performance liquid chromatographic procedure.

  5. Existing technology transfer report: analytical capabilities. Volume 1

    SciTech Connect (OSTI)

    Tewari, K.C.

    1984-06-01

    The overall objective of the on-going analytical efforts was to develop in-house expertise and analytical capability for the analysis of coal and coal-derived products in support of SRC-I process technology. The approach taken and work accomplished involved: identification of test methods and associated equipment; review and implementation of analytical facility plan; evaluation of existing instrumentation; evaluation and purchase of new instruments; training of laboratory personnel; validation or development of analytical methods; development of standard product work-up methods; and development of analytical protocol for detailed characterization of SRC-I solid and liquid products. Expertise in analytical chemistry was developed by organizing historical knowledge and assimilating new knowledge as it became available from inside and outside research facilities and the chemical literature. The data were then used to define analytical methods, instrumentation, space, staff needed to create a functional coal analysis laboratory. This report summarizes the direction and progress of the analytical development efforts during the period 1974 to 1980. 2 references, 5 figures.

  6. Capabilities

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Capabilities Profile Pages View profiles for scientists and researchers. Explore potential collaborations and project opportunities. Search the extensive range of capabilities by keyword to quickly find who and what you are looking for. Profile Pages Search Capabilities| Employees Capabilities Sort Capabilities Accelerators and Electrodynamics Search High power linear accelerator science and technology Search Accelerator operations Search Accelerator controls Search Neutron science Search Proton

  7. Capabilities

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Capabilities Structures of the zwitterionic coatings synthesized for this study. Permalink Gallery Investigations on Anti-biofouling Zwitterionic Coatings for MHK Is Now in Press Analysis, Capabilities, Energy, News, News & Events, Renewable Energy, Research & Capabilities, Water Power Investigations on Anti-biofouling Zwitterionic Coatings for MHK Is Now in Press Sandia's Marine Hydrokinetic (MHK) Advanced Materials program has a new publication on the antifouling efficacy of

  8. Capabilities

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Stationary Power/Safety, Security & Resilience of Energy Infrastructure/Battery Testing/Capabilities Capabilities admin 2015-10-20T02:29:12+00:00 Facility Description Click to Open Factsheet 2012-3432P [181kb pdf] The Energy Storage Test Pad (ESTP) in conjunction with the Energy Storage Analysis Laboratory (ESAL) provides trusted, independent, third party testing and validation from the cell level up to 1+ MW AC electrical energy storage (EES) systems. In addition to long-term testing,

  9. Query | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Query Query Query Query_1.pdf Query (104.29 KB) More Documents & Publications DOE Retrospective Review Plan and Burden Reduction Report July 29, 2013 DOE EO 13563 January 2014 Update Report and Burden Reduction Efforts DOE Retrospective Review Plan and Burden Reduction Report - December 18, 2012

  10. IN-SITU XRD OF OPERATING LSFC CATHODES: DEVELOPMENT OF A NEW ANALYTICAL CAPABILITY

    SciTech Connect (OSTI)

    Hardy, John S.; Templeton, Jared W.; Stevenson, Jeffry W.

    2012-11-19

    A solid oxide fuel cell (SOFC) research capability has been developed that facilitates measuring the electrochemical performance of an operating SOFC while simultaneously performing x-ray diffraction on its cathode. The evolution of this research tool’s development is discussed together with a description of the instrumentation used for in-situ x-ray diffraction (XRD) measurements of operating SOFC cathodes. The challenges that were overcome in the process of developing this capability, which included seals and cathode current collectors, are described together with the solutions that are presently being applied to mitigate them.

  11. Dynamic Analytical Capability to Better Understand and Anticipate Extremist Shifts Within Populations under Authoritarian Regimes.

    SciTech Connect (OSTI)

    Bernard, Michael Lewis

    2015-11-01

    The purpose of this work is to create a generalizable data- and theory-supported capability to better understand and anticipate (with quantifiable uncertainty): 1) how the dynamics of allegiance formations between various groups and society are impacted by active conflict and by third-party interventions and 2) how/why extremist allegiances co-evolve over time due to changing geopolitical, sociocultural, and military conditions.

  12. Existing technology transfer report: analytical capabilities. Volume 2. Appendix A. [Methods and procedures for analysis

    SciTech Connect (OSTI)

    Tewari, K.C.

    1984-06-01

    This volume contains 10 attachments entitled: Monthly progress reports; Method CHN-4 (Carbon, Hydrogen and Nitrogen analysis by Perkin-Elmer elemental analyses); Method Oxygen-6 (oxygen analyzer); Method Nitrogen-8 (Low level nitrogen analysis by Perkin-Elmer 240 elemental analyzer); Method Sulfur-10 (sulfur analysis by oxidative microcoulometry); Method TGA-3 (thermogravimetric analysis of coal liquefaction products and process solvents); Method DSC-5 (Determination of glass transition temperature by differential scanning calorimetry); Method GC-1 (gas chromatography of Fischer-Tropsch products); Method GC-2 (gas chromatography of distillate products from coal liquefaction); Analytical Method No. 1160 (estimation of OH, NH, NH/sub 2/, concentration in methylene chloride soluble materials from SRC liquids); x-ray diffraction method for determining the orientation tendency in calcined coke; and evaluation of mass spectrometers.

  13. DEVELOPMENT OF TECHNOLOGIES AND ANALYTICAL CAPABILITIES FOR VISION 21 ENERGY PLANTS

    SciTech Connect (OSTI)

    Madhava Syamlal; Maxwell Osawe; Stephen Zitney; Lewis Collins; David Sloan; Woodrow Fiveland; Frank Joop; Philip Simon; K. Joseph Cleetus

    2005-04-01

    To accelerate the development of advanced power plants, DOE's Vision 21 program identified the need for an integrated suite of software tools that could be used to simulate and visualize new plant concepts. Existing process simulation software did not meet this objective of virtual-plant simulation. Sophisticated models of many individual equipment items are available; however, a seamless coupling capability that would integrate the advanced equipment (component) models to the process (system) simulation software remained to be developed. The inability to use models in an integrated manner causes knowledge loss (e.g., knowledge captured in detailed equipment models is usually not available in process simulation) and modeling inconsistencies (e.g., physical properties and reaction kinetics data in different models are not the same). A team consisting of Fluent Inc., ALSTOM Power Inc., Aspen Technology Inc., Intergraph Corporation, and West Virginia University, in collaboration with the National Energy Technology Laboratory (NETL), addressed this challenge in a project performed over the period from October 2000 through December 2004. In this project the integration of the cycle analysis software was based on widely used commercial software: Aspen Plus{reg_sign} for process simulation and FLUENT{reg_sign} for computational fluid dynamics (CFD) modeling of equipment items. The integration software was designed to also include custom (in-house, proprietary, legacy) equipment models that often encapsulate the experience from the many years of designing and operating the equipment. The team adopted CAPE-OPEN (CO) interfaces, the de facto international standard for communication among process models, for exchanging information between software. The software developed in this project is the first demonstration of the use of CO interfaces to link CFD and custom equipment models with process simulators. New interface requirements identified during this project were

  14. DEVELOPMENT OF TECHNOLOGIES AND ANALYTICAL CAPABILITIES FOR VISION 21 ENERGY PLANTS

    SciTech Connect (OSTI)

    Madhava Syamlal, Ph.D.

    2002-07-01

    A software design review meeting was held May 2-3 in Lebanon, NH. The work on integrating a reformer model based on CFD with a fuel cell flow sheet was completed (Task 2.0). The CFD database design was completed and the database API's finalized. A file -based CFD database was implemented and tested (Task 2.8). The task COM-CORBA Bridge-I was completed. The bridge now has CO interfaces for transferring reaction kinetics information from Aspen Plus to Fluent (Task 2.11). The capability for transferring temperature-dependent physical properties from Aspen Plus to Fluent was implemented (Task 2.12). Work on ''Model Selection'' GUI was completed. This GUI allows the process analyst to select models from the CFD database. Work on ''Model Edit'' GUI was started (Task 2.13). A version of Aspen Plus with the capability for using CO parameters in ''design spec'' analysis has become available. With this version being available, work on adding CO wrapper to INDVU code has been started (Task 2.15). A preliminary design for the Solution Strategy class was developed (Task 2.16). The requirements for transferring pressure data between Aspen Plus and Fluent were defined. The ability to include two CFD models in a flow sheet was successfully tested. The capability to handle multiple inlets and outlets in a CO block was tested (Task 2.17). A preliminary version of the Configuration Wizard, which helps a user to make any Fluent model readable from a process simulator, was developed and tested (Task 2.18). Work on constructing a flow sheet model for Demo Case 2 was started. The work on documenting Demo Case 2 is nearing completion (Task 3.2). A Fluent heat exchanger model was installed and tested. Work on calibrating the heat exchanger model was started (Task 4.1). An advisory board meeting was held in conjunction with the Fluent Users Group Meeting on Monday, June 10, 2002. The meeting minutes and presentations for the advisory board meeting have been posted on the project website

  15. Active Storage with Analytics Capabilities and I/O Runtime System for Petascale Systems

    SciTech Connect (OSTI)

    Choudhary, Alok

    2015-03-18

    Computational scientists must understand results from experimental, observational and computational simulation generated data to gain insights and perform knowledge discovery. As systems approach the petascale range, problems that were unimaginable a few years ago are within reach. With the increasing volume and complexity of data produced by ultra-scale simulations and high-throughput experiments, understanding the science is largely hampered by the lack of comprehensive I/O, storage, acceleration of data manipulation, analysis, and mining tools. Scientists require techniques, tools and infrastructure to facilitate better understanding of their data, in particular the ability to effectively perform complex data analysis, statistical analysis and knowledge discovery. The goal of this work is to enable more effective analysis of scientific datasets through the integration of enhancements in the I/O stack, from active storage support at the file system layer to MPI-IO and high-level I/O library layers. We propose to provide software components to accelerate data analytics, mining, I/O, and knowledge discovery for large-scale scientific applications, thereby increasing productivity of both scientists and the systems. Our approaches include 1) design the interfaces in high-level I/O libraries, such as parallel netCDF, for applications to activate data mining operations at the lower I/O layers; 2) Enhance MPI-IO runtime systems to incorporate the functionality developed as a part of the runtime system design; 3) Develop parallel data mining programs as part of runtime library for server-side file system in PVFS file system; and 4) Prototype an active storage cluster, which will utilize multicore CPUs, GPUs, and FPGAs to carry out the data mining workload.

  16. DEVELOPMENT OF TECHNOLOGIES AND ANALYTICAL CAPABILITIES FOR VISION 21 ENERGY PLANTS

    SciTech Connect (OSTI)

    Galen Richards, Ph.D.; David Sloan, Ph.D.; Woodrow Fiveland, Ph.D.

    2002-08-31

    The goal of this DOE Vision-21 project work scope is to develop an integrated suite of software tools that can be used to simulate and visualize advanced plant concepts. Existing process simulation software does not meet the DOE's objective of ''virtual simulation'' which is needed to evaluate complex cycles. The overall intent of the DOE is to improve predictive tools for cycle analysis, and to improve the component models that are used in turn to simulate the cycle. Advanced component models are available; however, a generic coupling capability that will link the advanced component models to the cycle simulation software remains to be developed. In the current project, the coupling of the cycle analysis and cycle component simulation software will be based on an existing suite of programs. The challenge is to develop a general-purpose software and communications link between the cycle analysis software Aspen Plus{reg_sign} (marketed by Aspen Technology, Inc.), and specialized component modeling packages, as exemplified by industrial proprietary codes (utilized by ALSTOM Power Inc.) and the FLUENT{trademark} CFD code (provided by Fluent Inc). ALSTOM Power has a task responsibility to select and run a combined cycle test case (designated as Demonstration Case 2) to demonstrate the feasibility of the linkage concept. This report summarizes and documents the unit selected to represent Case 2, a 250 MW, natural gas-fired, combined cycle power plant. An analogous document for Demonstration Case 1 was previously submitted on April 30, 2001. Sufficient information is available from the plant to adequately benchmark the model. Hence, the proposed unit is deemed to be well suited as a demonstration case. However, as the combined cycle plant selected for this study contains recent technology, sensitivity to the commercial implications of this study prevents the release of the plant name and limits the quantity of operating/design information that can be presented. These

  17. Guideline for Evaluating Analytical Chemistry Capabilities and Recommending Upgraded Methods and Instrumentation for Nuclear Material Control and Accountability at Russian Nuclear Facilities

    SciTech Connect (OSTI)

    Russ, G.P.

    1999-10-21

    Analytical chemistry plays a key role in nuclear material control and accounting (MC and A). A large part of Special Nuclear Material (SNM) inventories and virtually all of the highly attractive SNM inventories are based on sampling bulk materials followed by destructive assay (DA) of these materials. These measurements support MC and A in process control, physical inventory verification, evaluation of the effects of process changes, detecting and resolving shipper-receiver differences, and the resolution of inspector-facility differences. When evaluating these important functions, US Project Teams need to carefully assess the existing Russian analytical chemistry capabilities and to specify appropriate upgrades where needed. This evaluation and the specification of upgrades have proven difficult, in part, because of the highly specialized and technical nature of DA and because of the wide variety of methods and applications. In addition, providing a DA capability to a Russian analytical laboratory requires much more than simply supplying new instrumentation. Experience has shown that DA upgrades at Russian analytical facilities require more support equipment than was originally anticipated by US Teams. The purpose of this guidance document is to: (1) recommend criteria for US Projects Teams to use in their evaluation of Russian DA capabilities; (2) provide a basis for selection of appropriate upgrades where capabilities are inadequate to support MC and A goals; and (3) to provide a list of Da methods suitable for MC and A with the following information: performance and applications information, strengths and limitations, and references and information on cost. Criteria for evaluating existing capabilities and determining appropriate upgrades are difficult to define. However, this is the basic information needed by the US project Teams. Section IV addresses these criteria.

  18. Application of analytical capability to predict rapid cladding cooling and quench during the blowdown phase of a large break loss-of-coolant accident. [PWR

    SciTech Connect (OSTI)

    Aksan, S.N.; Tolman, E.L.; Nelson, R.A.

    1983-01-01

    Large-break Experiments L2-2 and L2-3 conducted in the Loss-of-Fluid Test (LOFT) facility experienced core-wide rapid quenches early in the blowdown transients. To further investigate rapid cladding quenches, separate effects experiments using Semiscale solid-type electric heater rods were conducted in the LOFT Test Support Facility (LTSF) over a wide range of inlet coolant conditions. The analytical capability to predict the cladding temperature response from selected LTSF experiments estimated to bound the hydraulic conditions causing the LOFT early blowdown quenches was investigated using the RELAP4 computer code and was shown to be acceptable over the film boiling cooldown phase. This analytical capability was then used to investigate the behavior of nuclear fuel rods under the same hydraulic conditions. The calculations show that, under rapid cooling conditions, the behaviors of nuclear and electrical heater rods are significantly different because the nuclear rods are conduction limited, while the electrical rods are convection limited.

  19. Towards Optimal Multi-Dimensional Query Processing with BitmapIndices

    SciTech Connect (OSTI)

    Rotem, Doron; Stockinger, Kurt; Wu, Kesheng

    2005-09-30

    Bitmap indices have been widely used in scientific applications and commercial systems for processing complex, multi-dimensional queries where traditional tree-based indices would not work efficiently. This paper studies strategies for minimizing the access costs for processing multi-dimensional queries using bitmap indices with binning. Innovative features of our algorithm include (a) optimally placing the bin boundaries and (b) dynamically reordering the evaluation of the query terms. In addition, we derive several analytical results concerning optimal bin allocation for a probabilistic query model. Our experimental evaluation with real life data shows an average I/O cost improvement of at least a factor of 10 for multi-dimensional queries on datasets from two different applications. Our experiments also indicate that the speedup increases with the number of query dimensions.

  20. Query

    Energy Savers [EERE]

    DOEIN CIA 12182006 12172008 Executive Office of the President, Council on Dixon, Robert K. DOEEE Environmental Quality (CEQ) 10232007 2232009 Dumaine, Carol CIA DOEIN ...

  1. Minimizing I/O Costs of Multi-Dimensional Queries with BitmapIndices

    SciTech Connect (OSTI)

    Rotem, Doron; Stockinger, Kurt; Wu, Kesheng

    2006-03-30

    Bitmap indices have been widely used in scientific applications and commercial systems for processing complex,multi-dimensional queries where traditional tree-based indices would not work efficiently. A common approach for reducing the size of a bitmap index for high cardinality attributes is to group ranges of values of an attribute into bins and then build a bitmap for each bin rather than a bitmap for each value of the attribute. Binning reduces storage costs,however, results of queries based on bins often require additional filtering for discarding it false positives, i.e., records in the result that do not satisfy the query constraints. This additional filtering,also known as ''candidate checking,'' requires access to the base data on disk and involves significant I/O costs. This paper studies strategies for minimizing the I/O costs for ''candidate checking'' for multi-dimensional queries. This is done by determining the number of bins allocated for each dimension and then placing bin boundaries in optimal locations. Our algorithms use knowledge of data distribution and query workload. We derive several analytical results concerning optimal bin allocation for a probabilistic query model. Our experimental evaluation with real life data shows an average I/O cost improvement of at least a factor of 10 for multi-dimensional queries on datasets from two different applications. Our experiments also indicate that the speedup increases with the number of query dimensions.

  2. SPARQL Query Form | OpenEI

    Open Energy Info (EERE)

    where a ?Concept LIMIT 100 Display Results As: Auto HTML Spreadsheet XML JSON Javascript NTriples RDFXML Rigorous check of the query Execution timeout, in milliseconds,...

  3. Bearing Analytics

    Broader source: Energy.gov [DOE]

    Bearing Analytics is a leading-edge equipment monitoring company aimed at pioneering a new era in industrial bearing condition monitoring. Our objective is to consolidate the needs of customers, environment, and manufacturers to improve asset management and energy efficiency capabilities one bearing at a time.

  4. Capabilities | NISAC

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NISACCapabilities content top Capabilities Synopsis of NISAC Modeling Capabilities NISAC designed advanced modeling and simulation capabilities to analyze critical infrastructure vulnerabilities, interdependencies, and complexities. These analyses are used to aid our nation's decisionmakers in policy-making, assessments, mitigation planning, education, training, and real-time assistance to crisis response organizations. The domains in which we work are large, complex, dynamic, adaptive,

  5. compound queries | OpenEI Community

    Open Energy Info (EERE)

    queries developer Google maps maps multicolor result formats results Semantic Mediawiki Hi all, Recently, a couple of people on OpenEI have asked me how to do compound (or...

  6. ask queries | OpenEI Community

    Open Energy Info (EERE)

    queries developer Google maps maps multicolor result formats results Semantic Mediawiki Hi all, Recently, a couple of people on OpenEI have asked me how to do compound (or...

  7. Large-Scale Continuous Subgraph Queries on Streams

    SciTech Connect (OSTI)

    Choudhury, Sutanay; Holder, Larry; Chin, George; Feo, John T.

    2011-11-30

    Graph pattern matching involves finding exact or approximate matches for a query subgraph in a larger graph. It has been studied extensively and has strong applications in domains such as computer vision, computational biology, social networks, security and finance. The problem of exact graph pattern matching is often described in terms of subgraph isomorphism which is NP-complete. The exponential growth in streaming data from online social networks, news and video streams and the continual need for situational awareness motivates a solution for finding patterns in streaming updates. This is also the prime driver for the real-time analytics market. Development of incremental algorithms for graph pattern matching on streaming inputs to a continually evolving graph is a nascent area of research. Some of the challenges associated with this problem are the same as found in continuous query (CQ) evaluation on streaming databases. This paper reviews some of the representative work from the exhaustively researched field of CQ systems and identifies important semantics, constraints and architectural features that are also appropriate for HPC systems performing real-time graph analytics. For each of these features we present a brief discussion of the challenge encountered in the database realm, the approach to the solution and state their relevance in a high-performance, streaming graph processing framework.

  8. Research Capabilities

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Research Capabilities Research Capabilities These capabilities are our science and engineering at work for the national security interest in areas from global climate to cyber security, from nonproliferation to new materials, from clean energy, to supercomputing. thumbnail of Bioscience At Los Alamos, scientists and engineers are working to unlock many of the mechanisms found in nature to improve humanity's ability to battle diseases, create new forms of environmentally friendly and abundant

  9. Requested information regarding remote analytical capabilities

    SciTech Connect (OSTI)

    Steel, R.T.

    1991-09-01

    This document describes a new method for analysis of cyanide in radioactive waste samples from the Hanford Site. The new assay is designed to increase throughput of samples, reduce waste volumes and decrease radiation exposure to analysts. The system is based on the Lachat Micro-Dist{sup TM} microdistillation system. This document contains the reference and methods manual for this kit, and also the specific PNL lab procedures for using this kit. 6 refs., 20 figs. (MHB)

  10. Cybersecurity Capability

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Cybersecurity Capability Maturity Model (C2M2) Office of Electricity Delivery and Energy Reliability Cybersecurity Capability Maturity Model (C2M2) Frequently Asked Questions 1) What is the C2M2 model? The C2M2 is a voluntary evaluation process utilizing industry-accepted cybersecurity practices that can be used to measure the maturity of an organization's cybersecurity capabilities. The C2M2 is designed to measure both the sophistication and sustainment of a cyber security program. The model

  11. Experimental Capabilities

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    experimental capabilities Experimental Capabilities The National Ignition Facility is the premier high energy density science facility in the world, with laser energies 10 times greater than any other high-energy inertial confinement fusion (ICF) laser system. A major focus of NIF is a national effort to demonstrate ignition and thermonuclear burn in the laboratory. NIF also conducts a variety of experiments to study matter at the extremes, including studies of material properties,

  12. CAMS Capabilities

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    cams capabilities CAMS Capabilities HVEC 10 MV Model FN Tandem Of the three accelerators CAMS utilizes the largest is the HVEC 10 MV Model FN Tandem, which was obtained from the University of Washington and installed at LLNL in the mid-80s. During installation the accelerator's belt charging system was replaced with a NEC Pelletron, new Dowlish spiral-inclined beam tubes were installed, as were the gas-handling systems necessary for use of SF6 as the insulating tank gas. The FN accelerator is

  13. NREL: Energy Systems Integration Facility - Capabilities

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    research capabilities include: Systems integration Prototype and component development Manufacturing and material diagnostics High-performance computing and analytics. Photo of...

  14. Increasing ask query limit | OpenEI Community

    Open Energy Info (EERE)

    via json. For example, this query only returns two entries: http:en.openei.orgservicesrestutilityrates?versionlatest&formatjsonplain&offset9998&limit30&detailb...

  15. Oregon Certified Water Right Examiners Query Webpage | Open Energy...

    Open Energy Info (EERE)

    Not Provided DOI Not Provided Check for DOI availability: http:crossref.org Online Internet link for Oregon Certified Water Right Examiners Query Webpage Citation State of...

  16. SUSS PM 5 Analytic Probe

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    SUSS PM 5 Analytic Probe analytic.jpg (63416 bytes) CAMD refurbished a Suss microprobe station to perform resist adhesion test. The apparatus is equipped with a 10 lb. linear motor, two microprobes and a CCD camera for observation. Capabilities: Capable of removing PMMA bonded sheets from Si Fine probing of microstructures Back to Equipment

  17. Sandia National Laboratories: Data Analytics

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Pathfinder Airborne ISR Systems What is SAR? Areas of Expertise Images VideoSAR Publications Facebook Twitter YouTube Flickr RSS Top Areas of Expertise Capabilities Hardware Modes & Frequency Bands of Operation Platforms Missions Tasking, Processing, Exploitation & Dissemination (TPED) Data Analytics Pathfinder Airborne ISR Systems Data Analytics Data Analytics Sandia National Laboratories: Synthetic Apperature Radar (SAR): SAR Hardware PANTHER - Pattern ANalytics To support

  18. Query-Driven Visualization and Analysis

    SciTech Connect (OSTI)

    Ruebel, Oliver; Bethel, E. Wes; Prabhat, Mr.; Wu, Kesheng

    2012-11-01

    This report focuses on an approach to high performance visualization and analysis, termed query-driven visualization and analysis (QDV). QDV aims to reduce the amount of data that needs to be processed by the visualization, analysis, and rendering pipelines. The goal of the data reduction process is to separate out data that is "scientifically interesting'' and to focus visualization, analysis, and rendering on that interesting subset. The premise is that for any given visualization or analysis task, the data subset of interest is much smaller than the larger, complete data set. This strategy---extracting smaller data subsets of interest and focusing of the visualization processing on these subsets---is complementary to the approach of increasing the capacity of the visualization, analysis, and rendering pipelines through parallelism. This report discusses the fundamental concepts in QDV, their relationship to different stages in the visualization and analysis pipelines, and presents QDV's application to problems in diverse areas, ranging from forensic cybersecurity to high energy physics.

  19. HDF5-FastQuery: An API for Simplifying Access to Data Storage,Retrieval, Indexing and Querying

    SciTech Connect (OSTI)

    Bethel, E. Wes; Gosink, Luke; Shalf, John; Stockinger, Kurt; Wu,Kesheng

    2006-06-15

    This work focuses on research and development activities that bridge a gap between fundamental data management technology index, query, storage and retrieval and use of such technology in computational and computer science algorithms and applications. The work has resulted in a streamlined applications programming interface (API) that simplifies data storage and retrieval using the HDF5 data I/O library, and eases use of the FastBit compressed bitmap indexing software for data indexing/querying. The API, which we call HDF5-FastQuery, will have broad applications in domain sciences as well as associated data analysis and visualization applications.

  20. Multicolor Maps from Compound Queries | OpenEI Community

    Open Energy Info (EERE)

    queries developer Google maps maps multicolor result formats results Semantic Mediawiki Hi all, Recently, a couple of people on OpenEI have asked me how to do compound (or...

  1. T-703: Cisco Unified Communications Manager Open Query Interface Lets

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Remote Users Obtain Database Contents | Department of Energy 703: Cisco Unified Communications Manager Open Query Interface Lets Remote Users Obtain Database Contents T-703: Cisco Unified Communications Manager Open Query Interface Lets Remote Users Obtain Database Contents August 26, 2011 - 3:45pm Addthis PROBLEM: A vulnerability was reported in Cisco Unified Communications Manager. A remote user can obtain database contents PLATFORM: Cisco Unified Communications Manager 6.x, 7.x, 8.0, 8.5

  2. Analytical and Radiochemistry for Nuclear Forensics

    SciTech Connect (OSTI)

    Steiner, Robert Ernest; Dry, Donald E.; Kinman, William Scott; Podlesak, David; Tandon, Lav

    2015-05-26

    Information about nonproliferation nuclear forensics, activities in forensics at Los Alamos National Laboratory, radio analytical work at LANL, radiochemical characterization capabilities, bulk chemical and materials analysis capabilities, and future interests in forensics interactions.

  3. Parallel Index and Query for Large Scale Data Analysis

    SciTech Connect (OSTI)

    Chou, Jerry; Wu, Kesheng; Ruebel, Oliver; Howison, Mark; Qiang, Ji; Prabhat,; Austin, Brian; Bethel, E. Wes; Ryne, Rob D.; Shoshani, Arie

    2011-07-18

    Modern scientific datasets present numerous data management and analysis challenges. State-of-the-art index and query technologies are critical for facilitating interactive exploration of large datasets, but numerous challenges remain in terms of designing a system for process- ing general scientific datasets. The system needs to be able to run on distributed multi-core platforms, efficiently utilize underlying I/O infrastructure, and scale to massive datasets. We present FastQuery, a novel software framework that address these challenges. FastQuery utilizes a state-of-the-art index and query technology (FastBit) and is designed to process mas- sive datasets on modern supercomputing platforms. We apply FastQuery to processing of a massive 50TB dataset generated by a large scale accelerator modeling code. We demonstrate the scalability of the tool to 11,520 cores. Motivated by the scientific need to search for inter- esting particles in this dataset, we use our framework to reduce search time from hours to tens of seconds.

  4. Capabilities | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Staff Directory About HEP at Work Career Opportunities Staff Directory Argonne National Laboratory High Energy Physics Research Facilities Capabilities Initiatives Publications News & Events Capabilities Electronics Design and Fabrication High Performance Computing Mechanical Engineering Monte Carlo Simulations Capabilities Argonne's High Energy Physics division maintains a number of key capabilities to augment the research capacities of scientists at Argonne and throughout the high-energy

  5. Capabilities | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Catalysis Partnerships Licensing Sponsored Research Technical Services Technologist in Residence News Press Releases Feature Stories In the News Photos Videos Ombudsman Ombudsman Argonne National Laboratory Technology Development and Commercialization About Technologies Available for Licensing Capabilities Partnerships News Capabilities Catalysis Capabilities Argonne offers a wide range of R&D capabilities that collaborators from private industry, federal agencies, and state and local

  6. Statement of Capabilities

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Statement of Capabilities Statement of Capabilities World-class experts and capabilities countering all aspects of explosive threats, and aiming predominantly at enhanced detection capabilities. What is a SOC Letter? A nonbinding letter, a SOC is written by LACED to a requesting organization. The SOC describes a unique capability or service available from LACED on a non-exclusive basis. A SOC letter is not an endorsement of the requester and does not constitute a guarantee that LACED will

  7. Data Analytics

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    MANTISSA Energy Aware Computing Exascale Computing Partnerships Shifter: User Defined Images Archive APEX Home » R & D » Data Analytics Data Analytics MANTISSA Massive Acceleration of New Techniques In Science with Scalable Algorithms: Scalable Statistics and Machine Learning Algorithms are essential for extracting insights from Big Data. Our interdisciplinary team is trying to address a number of challenging analysis problems from a number of science domains at Lawrence Berkeley National

  8. Secure quantum private information retrieval using phase-encoded queries

    SciTech Connect (OSTI)

    Olejnik, Lukasz

    2011-08-15

    We propose a quantum solution to the classical private information retrieval (PIR) problem, which allows one to query a database in a private manner. The protocol offers privacy thresholds and allows the user to obtain information from a database in a way that offers the potential adversary, in this model the database owner, no possibility of deterministically establishing the query contents. This protocol may also be viewed as a solution to the symmetrically private information retrieval problem in that it can offer database security (inability for a querying user to steal its contents). Compared to classical solutions, the protocol offers substantial improvement in terms of communication complexity. In comparison with the recent quantum private queries [Phys. Rev. Lett. 100, 230502 (2008)] protocol, it is more efficient in terms of communication complexity and the number of rounds, while offering a clear privacy parameter. We discuss the security of the protocol and analyze its strengths and conclude that using this technique makes it challenging to obtain the unconditional (in the information-theoretic sense) privacy degree; nevertheless, in addition to being simple, the protocol still offers a privacy level. The oracle used in the protocol is inspired both by the classical computational PIR solutions as well as the Deutsch-Jozsa oracle.

  9. Federal Technical Capability Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2004-05-18

    Provides requirements and responsibilities to ensure recruitment and hiring of technically capable personnel to retain critical technical capabilities within the Department at all times. Cancels DOE M 426.1-1. Canceled by DOE O 426.1.

  10. NSTec Overview and Capabilities

    SciTech Connect (OSTI)

    Meidinger, A.

    2012-07-27

    This presentation describes the history of the Nevada National Security Site (Nevada Test Site) Contract as well as current capabilities.

  11. Capabilities | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Capabilities To learn about CNM instruments and capabilities, please click on the group names in the left navigation bar. Access to capabilities, tools, and facilities is provided through a peer-reviewed proposal submission process. Although individual capabilities are managed by one of the specific groups, all of them can be used across the CNM scientific portfolio and requested in a user proposal. Before submitting a proposal for access, prospective users are encouraged to contact staff

  12. Analytical Technology

    SciTech Connect (OSTI)

    Goheen, Steven C.

    2001-07-01

    Characterizing environmental samples has been exhaustively addressed in the literature for most analytes of environmental concern. One of the weak areas of environmental analytical chemistry is that of radionuclides and samples contaminated with radionuclides. The analysis of samples containing high levels of radionuclides can be far more complex than that of non-radioactive samples. This chapter addresses the analysis of samples with a wide range of radioactivity. The other areas of characterization examined in this chapter are the hazardous components of mixed waste, and special analytes often associated with radioactive materials. Characterizing mixed waste is often similar to characterizing waste components in non-radioactive materials. The largest differences are in associated safety precautions to minimize exposure to dangerous levels of radioactivity. One must attempt to keep radiological dose as low as reasonably achievable (ALARA). This chapter outlines recommended procedures to safely and accurately characterize regulated components of radioactive samples.

  13. Preliminary Results on Uncertainty Quantification for Pattern Analytics

    SciTech Connect (OSTI)

    Stracuzzi, David John; Brost, Randolph; Chen, Maximillian Gene; Malinas, Rebecca; Peterson, Matthew Gregor; Phillips, Cynthia A.; Robinson, David G.; Woodbridge, Diane

    2015-09-01

    This report summarizes preliminary research into uncertainty quantification for pattern ana- lytics within the context of the Pattern Analytics to Support High-Performance Exploitation and Reasoning (PANTHER) project. The primary focus of PANTHER was to make large quantities of remote sensing data searchable by analysts. The work described in this re- port adds nuance to both the initial data preparation steps and the search process. Search queries are transformed from does the specified pattern exist in the data? to how certain is the system that the returned results match the query? We show example results for both data processing and search, and discuss a number of possible improvements for each.

  14. Science & Engineering Capabilities

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Capabilities Science & Engineering Capabilities These capabilities are our science and engineering at work for the national security interest in areas from global climate to cyber security, from nonproliferation to new materials, from clean energy solutions to supercomputing. Accelerators, Electrodynamics» Energy» Materials Science» Bioscience: Bioenergy, Biosecurity, and Health» Engineering» National Security, Weapons Science» Chemical Science» High-Energy-Density Plasmas, Fluids»

  15. Capabilities: Science Pillars

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Pillars Capabilities: Science Pillars The Lab's four Science Pillars harness our scientific capabilities for national security solutions. What are the Los Alamos National Laboratory's Science Pillars? The Laboratory has established the Science Pillars under four main themes to bring together the Laboratory's diverse array of scientific capabilities and expertise: Information, Science, and Technology Pillar Materials for the Future Pillar Nuclear and Particle Futures Pillar Science of Signatures

  16. NREL: Biomass Research - Capabilities

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    is then separated, purified, and recovered for use as a transportation fuel. NREL biomass researchers and scientists have strong capabilities in many facets of biomass...

  17. Postdoc capability awareness AOT

    SciTech Connect (OSTI)

    Erickson, John L.

    2015-12-18

    This is a summary of the LANL accelerator operations and technology division prepared for the postdoc programmatic capability awareness workshop in engineering and applied sciences.

  18. Federal Technical Capability Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2000-06-05

    The Federal Technical Capability Manual provides the process for the recruitment, deployment, development, and retention of Federal personnel with the demonstrated technical capability to safely accomplish the Departments missions and responsibilities at defense nuclear facilities. Canceled by DOE M 426.1-1A. Does not cancel other directives.

  19. Federal Technical Capability

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2009-11-19

    This directive defines requirements and responsibilities for meeting the Department of Energy (DOE) commitment to recruiting, deploying, developing, and retaining a technically competent workforce that will accomplish DOE missions in a safe and efficient manner through the Federal Technical Capability Program (FTCP). Cancels DOE M 426.1-1A, Federal Technical Capability Manual.

  20. Sandia National Laboratories: Capabilities

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Capabilities Alt text The PSL maintains measurement and calibration expertise in these areas: AC Electrical DC Electrical Electrical Flow and Humidity Acceleration and Shock Gas Leaks Length Mass and Force Mechanical Microwave Pressure Radiation Optics Temperature Vacuum

  1. Sandia National Laboratories: Capabilities

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Top Capabilities Directed Energy Laser Applications Integrated Military Systems (IMS) Capabilities What We Do Supporting Sandia's national security mission in both traditional and emerging areas Alt text Areas of Expertise Integrated Military Systems (IMS) supports Sandia's national security mission in both traditional and emerging areas. Drawing on over six decades of weapons work and expertise, IMS continues to develop and refine many elements of strike systems, targets, and missile defense

  2. NREL: Geothermal Technologies - Capabilities

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Capabilities The NREL geothermal team leverages its capabilities in several different areas to enhance the visibility of geothermal technologies. These areas include low-temperature resources; enhanced geothermal systems; strategic planning, analysis, and modeling; and project assessment. Low-Temperature Geothermal Resources NREL works to develop and deploy innovative new technologies that will help the geothermal community achieve widespread adoption of under-utilized low-temperature resources

  3. NREL: Transportation Research - Capabilities

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Capabilities A Vision for Sustainable Transportation Line graph illustrating three pathways (biofuel, hydrogen, and electric vehicle) to reduce energy use and greenhouse gas emissions. Electric Vehicle Technologies & Targets 3-D illustration of electric car diagramming energy storage, power electronics, and climate control components. NREL uses 100% of its considerable transportation research, development, and deployment (RD&D) capabilities to pursue sustainable solutions that deliver

  4. Sierra/Fuego Capabilities

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Assessment of Existing Sierra/Fuego Capabilities Related to Grid-to-Rod Fretting (GTRF) Salvador Rodriguez and Daniel Z. Turner Sandia National Laboratory June 30, 2011 CASL-U-2011-0023-000-a SANDIA REPORT SAND2011-XXXX Unlimited Release Printed June 30, 2011 Assessment of existing Sierra/Fuego capabilities related to grid-to-rod-fretting (GTRF) Salvador B. Rodriguez and Daniel Z. Turner Prepared by Sandia National Laboratories Albuquerque, New Mexico 87185 and Livermore, California 94550 Sandia

  5. Hydrologic Modeling Capabilities

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Understanding complex hydrologic systems requires the ability to develop, utilize, and interpret both numerical and analytical models. The Defense Waste Management Programs has both experience and technical knowledge to use and develop Earth systems models. Hydrological Modeling Models are simplified representations of reality, which we accept do not capture every detail of reality. Mathematical and numerical models can be used to rigorously test geologic and hydrologic assumptions, determine

  6. Metrology Measurement Capabilities

    SciTech Connect (OSTI)

    Dr. Glen E. Gronniger

    2007-10-02

    This document contains descriptions of Federal Manufacturing & Technologies (FM&T) Metrology capabilities, traceability flow charts, and the measurement uncertainty of each measurement capability. Metrology provides NIST traceable precision measurements or equipment calibration for a wide variety of parameters, ranges, and state-of-the-art uncertainties. Metrology laboratories conform to the requirements of the Department of Energy Development and Production Manual Chapter 13.2, ANSI/ISO/IEC ANSI/ISO/IEC 17025:2005, and ANSI/NCSL Z540-1. FM&T Metrology laboratories are accredited by NVLAP for the parameters, ranges, and uncertainties listed in the specific scope of accreditation under NVLAP Lab code 200108-0. See the Internet at http://ts.nist.gov/Standards/scopes/2001080.pdf. These parameters are summarized. The Honeywell Federal Manufacturing & Technologies (FM&T) Metrology Department has developed measurement technology and calibration capability in four major fields of measurement: (1) Mechanical; (2) Environmental, Gas, Liquid; (3) Electrical (DC, AC, RF/Microwave); and (4) Optical and Radiation. Metrology Engineering provides the expertise to develop measurement capabilities for virtually any type of measurement in the fields listed above. A strong audit function has been developed to provide a means to evaluate the calibration programs of our suppliers and internal calibration organizations. Evaluation includes measurement audits and technical surveys.

  7. Federal Technical Capability

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2009-11-19

    To define requirements and responsibilities for meeting the Department of Energy (DOE) commitment to recruiting, deploying, developing, and retaining a technically competent workforce that will accomplish DOE missions in a safe and efficient manner through the Federal Technical Capability Program (FTCP). Chg 1 dated 9-20-11 supersedes DOE O 426.1 and cancels DOE P 426.1.

  8. Electronic Mail Analysis Capability

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2001-01-08

    Establishes the pilot program to test the Department of Energy (DOE) Electronic Mail Analysis Capability (EMAC), which will be used to monitor and analyze outgoing and incoming electronic mail (e-mail) from the National Nuclear Security Administration (NNSA) and DOE laboratories that are engaged in nuclear weapons design or work involving special nuclear material. No cancellation.

  9. ORISE: Radiochemistry and Environmental Analytical Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Radiochemistry and Environmental Analytical Laboratory ORISE techinican performs a radiochemical analysis To complement our environmental assessment and health physics capabilities, the Oak Ridge Institute for Science and Education (ORISE) maintains a radiochemistry and environmental analytical laboratory that facilitates the analysis of environmental samples and unique matrices. ORISE performs radiochemical analyses exclusively for the U.S. Nuclear Regulatory Commission (NRC), as well as

  10. V-204: A specially crafted query can cause BIND to terminate...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    affected source distributions may crash with assertion failures triggered in the same fashion. IMPACT: A specially crafted DNS query could cause the DNS service to terminate...

  11. Metrology Measurement Capabilities

    SciTech Connect (OSTI)

    Barnes, L.M.

    2003-11-12

    This document contains descriptions of Federal Manufacturing & Technologies (FM&T) Metrology capabilities, traceability flow charts, and the measurement uncertainty of each measurement capability. Metrology provides NIST traceable precision measurements or equipment calibration for a wide variety of parameters, ranges, and state-of-the-art uncertainties. Metrology laboratories conform to the requirements of the Department of Energy Development and Production Manual Chapter 8.4, ANSI/ISO/IEC ANSI/ISO/IEC 17025:2000, and ANSI/NCSL Z540-1 (equivalent to ISO Guide 25). FM&T Metrology laboratories are accredited by NVLAP for the parameters, ranges, and uncertainties listed in the specific scope of accreditation under NVLAP Lab code 200108-0. See the Internet at http://ts.nist.gov/ts/htdocs/210/214/scopes/2001080.pdf. These parameters are summarized in the table at the bottom of this introduction.

  12. NETL Research Capabilities

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    netl research capabilities NETL Research Scientist As the lead field center for the DOE Office of Fossil Energy's R&D program, NETL has established a strong onsite research program conducted by federal scientists and engineers. Onsite R&D is managed by NETL's Office of Research and Development (ORD) and makes important contributions to NETL's mission of implementing a research, development, and demonstration program to resolve the environmental, supply, and reliability constraints of

  13. Chemical Sciences Capabilities

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Modeling and Simulation in the Chemical Sciences Capabilities Modeling and simulation help us transform chemical data into meaningful information: * Develop remote-sensors that detect nuclear materials * Perform large- or small-scaled process modeling * Simulate new chemicals with tailored properties for diverse applications * Analyze chemical reaction rates for complex modeling needs * Examine chemical-sciences data and modeling for nuclear forensics * Analyze high explosive data and perform

  14. Leveraging National Lab Capabilities

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    2/13/2015 eere.energy.gov Fuel Cell Seminar & Energy Exposition Los Angeles, California November 11, 2014 Leveraging National Lab Capabilities Dr. Sunita Satyapal, Director Chris Ainscough, P.E., NREL Fuel Cell Technologies Office U.S. Department of Energy 2 | Fuel Cell Technologies Office Source: US DOE 2/13/2015 eere.energy.gov All-of-the-Above Energy Strategy "We've got to invest in a serious, sustained, all-of-the-above energy strategy that develops every resource available for the

  15. Size separation of analytes using monomeric surfactants

    DOE Patents [OSTI]

    Yeung, Edward S.; Wei, Wei

    2005-04-12

    A sieving medium for use in the separation of analytes in a sample containing at least one such analyte comprises a monomeric non-ionic surfactant of the of the general formula, B-A, wherein A is a hydrophilic moiety and B is a hydrophobic moiety, present in a solvent at a concentration forming a self-assembled micelle configuration under selected conditions and having an aggregation number providing an equivalent weight capable of effecting the size separation of the sample solution so as to resolve a target analyte(s) in a solution containing the same, the size separation taking place in a chromatography or electrophoresis separation system.

  16. Data and Analytics Strategy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and Analytics Strategy --- 1 --- Prabhat Data and Analytics Group Lead February 23, 2015 ... ata S o6ware * Big D ata U sers --- 3 --- Data and Analytics Team --- 4 --- DAS T eam M ...

  17. Electron Microscopy Center Capabilities | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Electron Microscopy Center Capabilities ACAT: Argonne Chromatic Aberration-corrected TEM This FEI Titan 80-300 ST has a CEOS Cc/Cs corrector on the imaging side of the column to correct both spherical and chromatic aberrations. The Cc/Cs corrector also provides greatly-improved resolution and signal for energy filtered imaging and EELS. FEI Tecnai F20ST TEM/STEM This premier analytical transmission electron microscope (AEM) has specialized accessories including an energy-dispersive x-ray

  18. Analytical Services - Hanford Site

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Contracting Wastren Advantage, Inc. Analytical Services Contracting ORP Contracts and Procurements RL Contracts and Procurements CH2M HILL Plateau Remediation Company Mission Support Alliance Washington Closure Hanford HPM Corporation (HPMC) Wastren Advantage, Inc. Analytical Services HASQARD Focus Group Bechtel National, Inc. Washington River Protection Solutions Analytical Services Email Email Page | Print Print Page | Text Increase Font Size Decrease Font Size Analytical laboratory analyses

  19. Cyber Graph Queries for Geographically Distributed Data Centers

    SciTech Connect (OSTI)

    Berry, Jonathan W.; Collins, Michael; Kearns, Aaron; Phillips, Cynthia A.; Saia, Jared

    2015-05-01

    We present new algorithms for a distributed model for graph computations motivated by limited information sharing we first discussed in [20]. Two or more independent entities have collected large social graphs. They wish to compute the result of running graph algorithms on the entire set of relationships. Because the information is sensitive or economically valuable, they do not wish to simply combine the information in a single location. We consider two models for computing the solution to graph algorithms in this setting: 1) limited-sharing: the two entities can share only a polylogarithmic size subgraph; 2) low-trust: the entities must not reveal any information beyond the query answer, assuming they are all honest but curious. We believe this model captures realistic constraints on cooperating autonomous data centers. We have algorithms in both setting for s - t connectivity in both models. We also give an algorithm in the low-communication model for finding a planted clique. This is an anomaly- detection problem, finding a subgraph that is larger and denser than expected. For both the low- communication algorithms, we exploit structural properties of social networks to prove perfor- mance bounds better than what is possible for general graphs. For s - t connectivity, we use known properties. For planted clique, we propose a new property: bounded number of triangles per node. This property is based upon evidence from the social science literature. We found that classic examples of social networks do not have the bounded-triangles property. This is because many social networks contain elements that are non-human, such as accounts for a business, or other automated accounts. We describe some initial attempts to distinguish human nodes from automated nodes in social networks based only on topological properties.

  20. Unique Capabilities | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Unique Capabilities Whether it's finding new materials, processes, applications or the need for specialized analysis of existing materials, Ames Laboratory can utilize its unique capabilities to assist both the public and private sectors. Some of our unique capabilities include: Biofuels Novel Materials for Energy Research Photonic Systems Solid-State NMR Visual Engineering Rare Earth Metals Metals Processing Magnetic Materials Materials Preparation Center

  1. Collaborative Analytical Toolbox version 1.0

    Energy Science and Technology Software Center (OSTI)

    2008-08-21

    The purpose of the Collaborative Analytical Toolbox (CAT) is to provide a comprehensive, enabling, collaborative problem solving environment that enables users to more effectively apply and improve their analytical and problem solving capabilities. CAT is a software framework for integrating other tools and data sources. It includes a set of core services for collaboration and information exploration and analysis, and a framework that facilitates quickly integrating new ideas, techniques, and tools with existing data sources.

  2. Practical private database queries based on a quantum-key-distribution protocol

    SciTech Connect (OSTI)

    Jakobi, Markus; Simon, Christoph; Gisin, Nicolas; Bancal, Jean-Daniel; Branciard, Cyril; Walenta, Nino; Zbinden, Hugo

    2011-02-15

    Private queries allow a user, Alice, to learn an element of a database held by a provider, Bob, without revealing which element she is interested in, while limiting her information about the other elements. We propose to implement private queries based on a quantum-key-distribution protocol, with changes only in the classical postprocessing of the key. This approach makes our scheme both easy to implement and loss tolerant. While unconditionally secure private queries are known to be impossible, we argue that an interesting degree of security can be achieved by relying on fundamental physical principles instead of unverifiable security assumptions in order to protect both the user and the database. We think that the scope exists for such practical private queries to become another remarkable application of quantum information in the footsteps of quantum key distribution.

  3. U-038: BIND 9 Resolver crashes after logging an error in query.c

    Broader source: Energy.gov [DOE]

    A remote server can cause the target connected client to crash. Organizations across the Internet are reporting crashes interrupting service on BIND 9 nameservers performing recursive queries. Affected servers crash after logging an error in query.c with the following message: "INSIST(! dns_rdataset_isassociated(sigrdataset))" Multiple versions are reported as being affected, including all currently supported release versions of ISC BIND 9. ISC is actively investigating the root cause and working to produce patches which avoid the crash.

  4. U-039: ISC Update: BIND 9 Resolver crashes after logging an error in query.c

    Broader source: Energy.gov [DOE]

    A remote server can cause the target connected client to crash. Organizations across the Internet are reporting crashes interrupting service on BIND 9 nameservers performing recursive queries. Affected servers crash after logging an error in query.c with the following message: "INSIST(! dns_rdataset_isassociated(sigrdataset))" Multiple versions are reported as being affected, including all currently supported release versions of ISC BIND 9. ISC is actively investigating the root cause and working to produce patches which avoid the crash.

  5. Multimedia Analysis plus Visual Analytics = Multimedia Analytics

    SciTech Connect (OSTI)

    Chinchor, Nancy; Thomas, James J.; Wong, Pak C.; Christel, Michael; Ribarsky, Martin W.

    2010-10-01

    Multimedia analysis has focused on images, video, and to some extent audio and has made progress in single channels excluding text. Visual analytics has focused on the user interaction with data during the analytic process plus the fundamental mathematics and has continued to treat text as did its precursor, information visualization. The general problem we address in this tutorial is the combining of multimedia analysis and visual analytics to deal with multimedia information gathered from different sources, with different goals or objectives, and containing all media types and combinations in common usage.

  6. On Building Inexpensive Network Capabilities

    SciTech Connect (OSTI)

    Shue, Craig A; Kalafut, Prof. Andrew; Allman, Mark; Taylor, Curtis R

    2011-01-01

    There are many deployed approaches for blocking unwanted traffic, either once it reaches the recipient's network, or closer to its point of origin. One of these schemes is based on the notion of traffic carrying capabilities that grant access to a network and/or end host. However, leveraging capabilities results in added complexity and additional steps in the communication process: Before communication starts a remote host must be vetted and given a capability to use in the subsequent communication. In this paper, we propose a lightweight mechanism that turns the answers provided by DNS name resolution---which Internet communication broadly depends on anyway---into capabilities. While not achieving an ideal capability system, we show the mechanism can be built from commodity technology and is therefore a pragmatic way to gain some of the key benefits of capabilities without requiring new infrastructure.

  7. Actinide Analytical Chemistry

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AAC Actinide Analytical Chemistry We do analyses that range from assay of the major and ... Group Office (505) 667-4087 The Actinide Analytical Chemistry (C-AAC) Group at Los Alamos ...

  8. Trinity / NERSC-8 Capability Improvement

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Trinity / NERSC-8 Capability Improvement Trinity / NERSC-8 Capability Improvement As stated in Section 3.5 of the Technical Requirements, The performance of the ASC and NERSC capability improvement code suites will be evaluated at acceptance and used as acceptance criteria. All performance tests must continue to meet acceptance criteria throughout the lifetime of the system. These spreadsheets are here to provide examples but do not have to be returned with RFP response and will be required of

  9. Reorganization bolsters nuclear nonproliferation capability

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Reorganization bolsters nuclear nonproliferation capability Reorganization bolsters nuclear nonproliferation capability LANL has strengthened its capability in a key aspect of nuclear nonproliferation by combining two groups within its Global Security organization. June 27, 2012 Los Alamos National Laboratory sits on top of a once-remote mesa in northern New Mexico with the Jemez mountains as a backdrop to research and innovation covering multi-disciplines from bioscience, sustainable energy

  10. Graph Analytics for Signature Discovery

    SciTech Connect (OSTI)

    Hogan, Emilie A.; Johnson, John R.; Halappanavar, Mahantesh; Lo, Chaomei

    2013-06-01

    Within large amounts of seemingly unstructured data it can be diffcult to find signatures of events. In our work we transform unstructured data into a graph representation. By doing this we expose underlying structure in the data and can take advantage of existing graph analytics capabilities, as well as develop new capabilities. Currently we focus on applications in cybersecurity and communication domains. Within cybersecurity we aim to find signatures for perpetrators using the pass-the-hash attack, and in communications we look for emails or phone calls going up or down a chain of command. In both of these areas, and in many others, the signature we look for is a path with certain temporal properties. In this paper we discuss our methodology for finding these temporal paths within large graphs.

  11. NREL: Distributed Grid Integration - Capabilities

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Capabilities Photo of a man in safety glasses working with laboratory equipment. NREL's distributed grid integration researchers conduct testing and evaluation at the one-of-a-kind ...

  12. Capability

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    GE, used Swept Frequency Acoustic Interferometry technology to develop Sa re, the ... GE, used Swept Frequency Acoustic Interferometry technology to develop Sa re, the ...

  13. Capabilities

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    include: Airframe modeling Blast event shaping Detonation physics and chemistry Disruptive technologies Electromagnetic Energy (EME) coupling High-performance,...

  14. Capabilities

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2 - Sandia Energy Energy Search Icon Sandia Home Locations Contact Us Employee Locator Energy & Climate Secure & Sustainable Energy Future Stationary Power Energy Conversion Efficiency Solar Energy Wind Energy Water Power Supercritical CO2 Geothermal Natural Gas Safety, Security & Resilience of the Energy Infrastructure Energy Storage Nuclear Power & Engineering Grid Modernization Battery Testing Nuclear Energy Defense Waste Management Programs Advanced Nuclear Energy Nuclear

  15. Capabilities

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    3 - Sandia Energy Energy Search Icon Sandia Home Locations Contact Us Employee Locator Energy & Climate Secure & Sustainable Energy Future Stationary Power Energy Conversion Efficiency Solar Energy Wind Energy Water Power Supercritical CO2 Geothermal Natural Gas Safety, Security & Resilience of the Energy Infrastructure Energy Storage Nuclear Power & Engineering Grid Modernization Battery Testing Nuclear Energy Defense Waste Management Programs Advanced Nuclear Energy Nuclear

  16. Catalysis Capabilities | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Catalysis Research Areas Facilities and Equipment Intellectual Property Publications Staff Partnerships Licensing Sponsored Research Technical Services Technologist in Residence News Press Releases Feature Stories In the News Photos Videos Ombudsman Ombudsman Argonne National Laboratory Technology Development and Commercialization About Technologies Available for Licensing Capabilities Partnerships News Capabilities Catalysis Research Areas Facilities and Equipment Intellectual Property

  17. An Application of Multivariate Statistical Analysis for Query-Driven Visualization

    SciTech Connect (OSTI)

    Gosink, Luke J.; Garth, Christoph; Anderson, John C.; Bethel, E. Wes; Joy, Kenneth I.

    2010-03-01

    Abstract?Driven by the ability to generate ever-larger, increasingly complex data, there is an urgent need in the scientific community for scalable analysis methods that can rapidly identify salient trends in scientific data. Query-Driven Visualization (QDV) strategies are among the small subset of techniques that can address both large and highly complex datasets. This paper extends the utility of QDV strategies with a statistics-based framework that integrates non-parametric distribution estimation techniques with a new segmentation strategy to visually identify statistically significant trends and features within the solution space of a query. In this framework, query distribution estimates help users to interactively explore their query's solution and visually identify the regions where the combined behavior of constrained variables is most important, statistically, to their inquiry. Our new segmentation strategy extends the distribution estimation analysis by visually conveying the individual importance of each variable to these regions of high statistical significance. We demonstrate the analysis benefits these two strategies provide and show how they may be used to facilitate the refinement of constraints over variables expressed in a user's query. We apply our method to datasets from two different scientific domains to demonstrate its broad applicability.

  18. Nanophotonics Capabilities | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Nanophotonics Capabilities Transient absorption spectroscopy Laser excitation: 250-1200 nm Probe wavelength range: 300-1450 nm Delay times <100 fs-0.1 ms Time-resolved emission...

  19. NREL: Water Power Research - Capabilities

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Capabilities NREL supports the development of marine and hydrokinetic technologies and hydropower R&D through the U.S. Department of Energy's Water Power Program. Our activities span a wide spectrum of disciplines, including fluid mechanics; dynamics, structures, and fatigue; power systems and electronics; resource assessment and mapping; economic analysis; and grid interconnection. Read more about NREL's water power R&D capabilities: Design Review and Analysis Device and Component

  20. ORISE Science Education Programs: Capabilities

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Capabilities Science Education Programs Capabilities The Oak Ridge Institute for Science and Education (ORISE) connects the best and most diverse students and faculty members to programs closely aligned with the interests of a variety of research facilities, including those managed for the U.S. Department of Energy (DOE) and more than a dozen other federal agencies. Current ORISE science education program opportunities include: Undergraduate scholarships Graduate fellowships Postgraduate

  1. Web Analytics and Statistics

    Office of Energy Efficiency and Renewable Energy (EERE)

    EERE uses Google Analytics to capture statistics on its websites. These statistics help website managers measure and report on users, sessions, most visited pages, and more.

  2. Accelerator and electrodynamics capability review

    SciTech Connect (OSTI)

    Jones, Kevin W

    2010-01-01

    Los Alamos National Laboratory (LANL) uses capability reviews to assess the science, technology and engineering (STE) quality and institutional integration and to advise Laboratory Management on the current and future health of the STE. Capability reviews address the STE integration that LANL uses to meet mission requirements. The Capability Review Committees serve a dual role of providing assessment of the Laboratory's technical contributions and integration towards its missions and providing advice to Laboratory Management. The assessments and advice are documented in reports prepared by the Capability Review Committees that are delivered to the Director and to the Principal Associate Director for Science, Technology and Engineering (PADSTE). Laboratory Management will use this report for STE assessment and planning. LANL has defined fifteen STE capabilities. Electrodynamics and Accelerators is one of the seven STE capabilities that LANL Management (Director, PADSTE, technical Associate Directors) has identified for review in Fiscal Year (FY) 2010. Accelerators and electrodynamics at LANL comprise a blend of large-scale facilities and innovative small-scale research with a growing focus on national security applications. This review is organized into five topical areas: (1) Free Electron Lasers; (2) Linear Accelerator Science and Technology; (3) Advanced Electromagnetics; (4) Next Generation Accelerator Concepts; and (5) National Security Accelerator Applications. The focus is on innovative technology with an emphasis on applications relevant to Laboratory mission. The role of Laboratory Directed Research and Development (LDRD) in support of accelerators/electrodynamics will be discussed. The review provides an opportunity for interaction with early career staff. Program sponsors and customers will provide their input on the value of the accelerator and electrodynamics capability to the Laboratory mission.

  3. How can I query data on OpenEI and generate a map? | OpenEI Community

    Open Energy Info (EERE)

    How can I query data on OpenEI and generate a map? Home > Groups > Developer I'd like to have an Ask or SPARQL query display as a map in the OpenEI wiki section. What are the...

  4. Joaquin Correa JoaquinCorrea@lbl.gov NERSC Data and Analytics Services

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Joaquin Correa JoaquinCorrea@lbl.gov NERSC Data and Analytics Services NERSC User Meeting August, 2015 Data Analytics at NERSC Data analytics at NERSC Hardware Resource Management Runtime Framework Tools + Libraries Analytics Capabilities Science Applications Climate, Cosmology, Kbase, Materials, BioImaging, Your science! Statistics, Machine Learning R, python, MLBase Image Processing MATLAB OMERO, Fiji Graph Analytics GraphX Database Operations SQL MPI Spark SciDB Filesystems (Lustre),

  5. Research for new UAV capabilities

    SciTech Connect (OSTI)

    Canavan, G.H.; Leadabrand, R.

    1996-07-01

    This paper discusses research for new Unmanned Aerial Vehicles (UAV) capabilities. Findings indicate that UAV performance could be greatly enhanced by modest research. Improved sensors and communications enhance near term cost effectiveness. Improved engines, platforms, and stealth improve long term effectiveness.

  6. Extreme Scale Visual Analytics

    SciTech Connect (OSTI)

    Steed, Chad A; Potok, Thomas E; Pullum, Laura L; Ramanathan, Arvind; Shipman, Galen M; Thornton, Peter E; Potok, Thomas E

    2013-01-01

    Given the scale and complexity of today s data, visual analytics is rapidly becoming a necessity rather than an option for comprehensive exploratory analysis. In this paper, we provide an overview of three applications of visual analytics for addressing the challenges of analyzing climate, text streams, and biosurveilance data. These systems feature varying levels of interaction and high performance computing technology integration to permit exploratory analysis of large and complex data of global significance.

  7. LANL organic analysis detection capabilities for chemical and biological warfare agents

    SciTech Connect (OSTI)

    Ansell, G.B.; Cournoyer, M.E.; Hollis, K.W.; Monagle, M.

    1996-12-31

    Organic analysis is the analytical arm for several Los Alamos National Laboratory (LANL) research programs and nuclear materials processes, including characterization and certification of nuclear and nonnuclear materials used in weapons, radioactive waste treatment and waste certification programs. Organic Analysis has an extensive repertoire of analytical technique within the group including headspace gas, PCBs/pesticides, volatile organics and semivolatile organic analysis. In addition organic analysis has mobile labs with analytic capabilities that include volatile organics, total petroleum hydrocarbon, PCBs, pesticides, polyaromatic hydrocarbons and high explosive screening. A natural extension of these capabilities can be applied to the detection of chemical and biological agents,

  8. Data Intensive Architecture for Scalable Cyber Analytics

    SciTech Connect (OSTI)

    Olsen, Bryan K.; Johnson, John R.; Critchlow, Terence J.

    2011-12-19

    Cyber analysts are tasked with the identification and mitigation of network exploits and threats. These compromises are difficult to identify due to the characteristics of cyber communication, the volume of traffic, and the duration of possible attack. In this paper, we describe a prototype implementation designed to provide cyber analysts an environment where they can interactively explore a month’s worth of cyber security data. This prototype utilized On-Line Analytical Processing (OLAP) techniques to present a data cube to the analysts. The cube provides a summary of the data, allowing trends to be easily identified as well as the ability to easily pull up the original records comprising an event of interest. The cube was built using SQL Server Analysis Services (SSAS), with the interface to the cube provided by Tableau. This software infrastructure was supported by a novel hardware architecture comprising a Netezza TwinFin® for the underlying data warehouse and a cube server with a FusionIO drive hosting the data cube. We evaluated this environment on a month’s worth of artificial, but realistic, data using multiple queries provided by our cyber analysts. As our results indicate, OLAP technology has progressed to the point where it is in a unique position to provide novel insights to cyber analysts, as long as it is supported by an appropriate data intensive architecture.

  9. Renewable Analytics | Open Energy Information

    Open Energy Info (EERE)

    Analytics Jump to: navigation, search Name: Renewable Analytics Place: San Francisco, California Zip: 94104 Product: San francisco-based provider of public market trading...

  10. Web Applications for Data Analytics

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Web Applications for Data Web Applications for Data Analytics Description and Overview NERSC is providing, on an experimental basis, web-based applications for data analytics. This ...

  11. Tool For Editing Structured Query Language Text Within ORACLE Forms Applications

    Energy Science and Technology Software Center (OSTI)

    1991-02-01

    SQTTEXT is an ORACLE SQL*Forms application that allows a programmer to view and edit all the Structured Query Language (SQL) text for a given application on one screen. This application is an outgrowth of the prototyping of an on-line system dictionary for the Worldwide Household Goods Information system for Transportation-Modernization decision support system being prototyped by the Oak Ridge National Laboratory, but it can be applied to all SQL*Forms software development, debugging, and maintenance.

  12. Atmospheric Ionization Mass Spectrometry Capabilities at Sandia...

    Office of Scientific and Technical Information (OSTI)

    Mass Spectrometry Capabilities at Sandia National Labs. Citation Details In-Document Search Title: Atmospheric Ionization Mass Spectrometry Capabilities at Sandia National Labs. ...

  13. OLED Lighting Products: Capabilities, Challenges, Potential

    Energy Savers [EERE]

    Products: Capabilities, Challenges, Potential May 2016 Prepared for: Solid-State Lighting ... Pacific Northwest National Laboratory PNNL-SA-25479 OLED Lighting Products: Capabilities, ...

  14. Designation Memo: Federal Technical Capability Panel Chairperson...

    Energy Savers [EERE]

    Federal Technical Capability Panel Chairperson Designation Memo: Federal Technical Capability Panel Chairperson May 4, 2007, the Deputy Secretary memorandum designating Karen ...

  15. NERSC Enhances PDSF, Genepool Computing Capabilities

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Computing Capabilities NERSC Enhances PDSF, Genepool Computing Capabilities Linux cluster expansion speeds data access and analysis January 3, 2014 Christmas came early for...

  16. Analytical Services Management System

    Energy Science and Technology Software Center (OSTI)

    2005-03-30

    Analytical Services Management System (ASMS) provides sample management services. Sample management includes sample planning for analytical requests, sample tracking for shipping and receiving by the laboratory, receipt of the analytical data deliverable, processing the deliverable and payment of the laboratory conducting the analyses. ASMS is a web based application that provides the ability to manage these activities at multiple locations for different customers. ASMS provides for the assignment of single to multiple samples for standardmore » chemical and radiochemical analyses. ASMS is a flexible system which allows the users to request analyses by line item code. Line item codes are selected based on the Basic Ordering Agreement (BOA) format for contracting with participating laboratories. ASMS also allows contracting with non-BOA laboratories using a similar line item code contracting format for their services. ASMS allows sample and analysis tracking from sample planning and collection in the field through sample shipment, laboratory sample receipt, laboratory analysis and submittal of the requested analyses, electronic data transfer, and payment of the laboratories for the completed analyses. The software when in operation contains business sensitive material that is used as a principal portion of the Kaiser Analytical Management Services business model. The software version provided is the most recent version, however the copy of the application does not contain business sensitive data from the associated Oracle tables such as contract information or price per line item code.« less

  17. Analytical Services Management System

    SciTech Connect (OSTI)

    Church, Shane; Nigbor, Mike; Hillman, Daniel

    2005-03-30

    Analytical Services Management System (ASMS) provides sample management services. Sample management includes sample planning for analytical requests, sample tracking for shipping and receiving by the laboratory, receipt of the analytical data deliverable, processing the deliverable and payment of the laboratory conducting the analyses. ASMS is a web based application that provides the ability to manage these activities at multiple locations for different customers. ASMS provides for the assignment of single to multiple samples for standard chemical and radiochemical analyses. ASMS is a flexible system which allows the users to request analyses by line item code. Line item codes are selected based on the Basic Ordering Agreement (BOA) format for contracting with participating laboratories. ASMS also allows contracting with non-BOA laboratories using a similar line item code contracting format for their services. ASMS allows sample and analysis tracking from sample planning and collection in the field through sample shipment, laboratory sample receipt, laboratory analysis and submittal of the requested analyses, electronic data transfer, and payment of the laboratories for the completed analyses. The software when in operation contains business sensitive material that is used as a principal portion of the Kaiser Analytical Management Services business model. The software version provided is the most recent version, however the copy of the application does not contain business sensitive data from the associated Oracle tables such as contract information or price per line item code.

  18. Project Development and Finance: Capabilities (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2013-01-01

    Capabilities overview of NREL's Project Finance and Development Group within the Deployment and Market Transformation Directorate.

  19. OPSAID improvements and capabilities report.

    SciTech Connect (OSTI)

    Halbgewachs, Ronald D.; Chavez, Adrian R.

    2011-08-01

    Process Control System (PCS) and Industrial Control System (ICS) security is critical to our national security. But there are a number of technological, economic, and educational impediments to PCS owners implementing effective security on their systems. Sandia National Laboratories has performed the research and development of the OPSAID (Open PCS Security Architecture for Interoperable Design), a project sponsored by the US Department of Energy Office of Electricity Delivery and Energy Reliability (DOE/OE), to address this issue. OPSAID is an open-source architecture for PCS/ICS security that provides a design basis for vendors to build add-on security devices for legacy systems, while providing a path forward for the development of inherently-secure PCS elements in the future. Using standardized hardware, a proof-of-concept prototype system was also developed. This report describes the improvements and capabilities that have been added to OPSAID since an initial report was released. Testing and validation of this architecture has been conducted in another project, Lemnos Interoperable Security Project, sponsored by DOE/OE and managed by the National Energy Technology Laboratory (NETL).

  20. Industrial Analytics Corporation

    SciTech Connect (OSTI)

    Industrial Analytics Corporation

    2004-01-30

    The lost foam casting process is sensitive to the properties of the EPS patterns used for the casting operation. In this project Industrial Analytics Corporation (IAC) has developed a new low voltage x-ray instrument for x-ray radiography of very low mass EPS patterns. IAC has also developed a transmitted visible light method for characterizing the properties of EPS patterns. The systems developed are also applicable to other low density materials including graphite foams.

  1. Air Monitoring Network at Tonopah Test Range: Network Description, Capabilities, and Analytical Results

    SciTech Connect (OSTI)

    Hartwell, William T.; Daniels, Jeffrey; Nikolich, George; Shadel, Craig; Giles, Ken; Karr, Lynn; Kluesner, Tammy

    2012-01-01

    During the period April to June 2008, at the behest of the Department of Energy (DOE), National Nuclear Security Administration, Nevada Site Office (NNSA/NSO); the Desert Research Institute (DRI) constructed and deployed two portable environmental monitoring stations at the Tonopah Test Range (TTR) as part of the Environmental Restoration Project Soils Activity. DRI has operated these stations since that time. A third station was deployed in the period May to September 2011. The TTR is located within the northwest corner of the Nevada Test and Training Range (NTTR), and covers an area of approximately 725.20 km2 (280 mi2). The primary objective of the monitoring stations is to evaluate whether and under what conditions there is wind transport of radiological contaminants from Soils Corrective Action Units (CAUs) associated with Operation Roller Coaster on TTR. Operation Roller Coaster was a series of tests, conducted in 1963, designed to examine the stability and dispersal of plutonium in storage and transportation accidents. These tests did not result in any nuclear explosive yield. However, the tests did result in the dispersal of plutonium and contamination of surface soils in the surrounding area.

  2. DEVELOPMENT OF TECHNOLOGIES AND ANALYTICAL CAPABILITIES FOR VISION 21 ENERGY PLANTS

    SciTech Connect (OSTI)

    Madhava Syamlal, Ph.D.

    2001-07-10

    The training of a new project team member was completed (Task 2.1). The Software Requirements Document was written (Task 2.3). It was determined that the CAPE-OPEN interfaces are sufficient for the communication between Fluent and V21 Controller (Task 2.4). The AspenPlus-Fluent prototype on allyl/triacetone alcohol production was further developed to assist the GUI and software design tasks. The prototype was also used to analyze the sensitivity of a process simulation result with respect to a parameter in a CFD model embedded in the process simulation. Thus the integration of process simulation and CFD provides additional process insights and enables the engineer to optimize overall process performance (e.g., product purity and yield) with respect to important CFD design and operation parameters (e.g., CSTR shaft speed). A top-level design of the V21 Controller was developed and discussed. A draft version of the Software Design Document was written (Task 2.5/2.6). A preliminary software development plan was outlined. At first the V21 Controller will be developed and tested in two parts--a part that communicates with Fluent and a part that communicates with Aspen Plus. Then the two parts will be combined and tested with the allyl/triacetone alcohol flow sheet simulation. Much progress was made in writing the code for the two parts (Task 2.7). A requirement for pre-configured models was identified and added to the software requirements document (Task 2.9). Alstom Power's INDVU code was ported to the PC platform and calibrated. Aspen Plus model of the RP&L unit was improved to reflect the latest information received on the unit. Thus the preparation for linking INDVU code with the Aspen Plus model of RP&L unit is complete (Task 2.14). A report describing Demo Case 1 was written and submitted to DOE for review and approval (Task 3.1). The first Advisory Board meeting was held at the Fluent Users Group Meeting on June 6th. At the Advisory Board meeting, the project was reviewed, a demonstration was made, and verbal feedback was received. Meeting minutes have been issued (Task 5.0). Global-CAPE-OPEN organization was contacted for obtaining draft specifications in CORBA that are needed for writing the interfaces between V21 Controller and Fluent. Efforts are underway to establish collaboration with Norsk Hydro, who is leading a Global CAPE-OPEN project on linking CFD and process simulation models. Because of the similarity between that project and the present project, the two project teams can learn much from each other (Task 7.0).

  3. DEVELOPMENT OF TECHNOLOGIES AND ANALYTICAL CAPABILITIES FOR VISION 21 ENERGY PLANTS

    SciTech Connect (OSTI)

    Madhava Syamlal, Ph.D.

    2002-12-31

    A software design review meeting was conducted (Task 2.0). A CFD Viewer was developed, to allow the process analyst to view CFD results from the process simulator (Task 2.14). Work on developing a CO wrapper for the INDVU code was continued (Task 2.15). The model-edit GUI was modified to allow the user to specify a solution strategy. Enhancements were made to the solution strategy implementation (Task 2.16). Testing of the integrated software was continued and several bug fixes and enhancements were made: ability to expose CFD parameters to the process analyst and support for velocity and pressure inlet boundary conditions (Task 2.21). Work on preparing the release version progressed: Version 0.3 of V21 Controller was released, a global configuration dialog was implemented, and a code review process was initiated (Task 2.24). The calibration of the tube bank CFD model for the RP&L case was completed. While integrating the tube bank CFD model into the flow sheet model, several development requirements were identified and communicated to the developers. The requirements of porting V21 Controller and Configuration Wizard to FLUENT 6.1, turning off the transfer of temperature dependent properties, exposing CFD parameters in Aspen Plus and supporting velocity boundary conditions have been implemented (Task 4.1). An initial grid for the HRSG component has been prepared (Task 4.2). A web-based advisory board meeting was conducted on December 18, 2003 (Task 5.0). Project personnel attended and gave presentations at the Aspen World Conference, October 28-30, 2002; AIChE Annual Meeting, November 8, 2002; and the Vision 21 Simulation meeting at Iowa State University, November 19-20, 2002 (Task 7.0).

  4. DEVELOPMENT OF TECHNOLOGIES AND ANALYTICAL CAPABILITIES FOR VISION 21 ENERGY PLANTS

    SciTech Connect (OSTI)

    Maxwell Osawe; Madhava Syamlal; Krishna Thotapalli; Stephen Zitney

    2003-07-30

    This is the eleventh Quarterly Technical Report for DOE Cooperative Agreement No: DE-FC26-00NT40954. The goal of the project is to develop and demonstrate a software framework to enable virtual simulation of Vision 21 plants. During the last quarter much progress was made in software development. The CO wrapper for the integration of Alstom Power proprietary code INDVU was upgraded to CO V1.0.0 and was successfully integrated with an Aspen Plus flowsheet. The V21-Controller and the Fluent CO wrapper were upgraded to CO V.1.0.0, and the testing and debugging of the upgraded V21-Controller was completed. Two Aspen Plus analysis tools (sensitivity analysis and optimization) were successfully tested in an integrated simulation. Extensive testing of the integrated software was continued. A list of suggested enhancements was given to the software development team. Work on software documentation was started. Work on preparing the release version progressed: Several enhancements were made in the V21-Controller and the Fluent Configuration Wizard GUIs. Work to add persistence functionality to the V21-Controller was started. During the last quarter good progress was made in software demonstration. Demo Case 1 simulations were completed. This case, a conventional steam cycle with a CFD model representing the boiler module, was successfully demonstrated at 9 distinct load points from 33 MW to 19 MW. Much progress was made with Demo Case 2. Work on adding a CO wrapper to the HRSGSIM code was completed, and integrated simulations with the HRSGSIM code were conducted. The CFD heat exchanger model for Demo Case 2 was calibrated with HRSGSIM results. An Advisory Board meeting was held in Manchester, NH on May 6 during the Fluent Users Group Meeting. The preparation of the project final report was started.

  5. DEVELOPMENT OF TECHNOLOGIES AND ANALYTICAL CAPABILITIES FOR VISION 21 ENERGY PLANTS

    SciTech Connect (OSTI)

    Madhava Syamlal, Ph.D.

    2001-01-23

    To complete project planning, various project groups conducted several meetings and teleconferences. As a result a draft project management plan was written and circulated. The plan will be finalized in a project kick off meeting to be held on January 16, 2001 in Lebanon, NH, which will be attended by all project participants (Task 1.0). Various project personnel have been trained in the use of Fluent and Aspen Plus, which completes all the training tasks except for Aspen Plus and IDL training for Alstom Power (Task 2.1). A preliminary version of User Requirements Document (preURD) was written. This document will be sent to key users of Aspen Plus and FLUENT and their responses will be collected in January (Task 2.3). A prototype of Fluent integration with Aspen Plus was constructed for understanding the required software design. The development of a general architecture for the integrated software suite has been started (Task 2.6). Invitation letters for participation in an Advisory Board were sent out to several Vision 21 contractors. Their responses will be used to form an Advisory Board in January (Task 5.0). Fluent has awarded subcontracts to Alstom Power, CERC, and Aspen Tech and negotiations with Intergraph are underway. Aspen Plus and FLUENT were installed on a computer at CERC. The design of a project web site was completed, and the site setup was started (Task 7.0).

  6. DEVELOPMENT OF TECHNOLOGIES AND ANALYTICAL CAPABILITIES FOR VISION 21 ENERGY PLANTS

    SciTech Connect (OSTI)

    Madhava Syamlal, Ph.D.

    2001-10-20

    DOE Vision 21 project requirements for the support of Global CAPE-OPEN Reaction Kinetics interfaces in Aspen Plus 12 was written (Task 2.4). The software design document was written and posted on the project web site. Intergraph started work on a proof of concept demo of the physical domain software (Task 2.6). The COM-side (Aspen Plus) and CORBA-side (Fluent) pieces of the Vision 21 controller code were written and independently verified. The two pieces of the code were then combined. Debugging of the combined code is underway (Task 2.7). Papers on fuel cell processes were read in preparation for developing an example based on a fuel cell process (Task 2.8). The INDVU code has been used to replace the boiler component in the Aspen Plus flowsheet of the RP&L power plant. The INDVU code receives information from Aspen Plus and iterates on the split backpass LTSH bypass and excess air quantities until the stipulated superheat outlet temperature is satisfied. The combined INDVU-Aspen Plus model has been run for several load conditions (Task 2.14). Work on identifying a second demonstration case involving an advanced power cycle has been started (Task 3.2). Plans for the second Advisory Board meeting in November were made (Task 5.0). Intergraph subcontract was signed and work on a physical domain software demo was started. A second teleconference with Norsk Hydro was conducted to discuss Global CAPE-OPEN standards and issues related to COM-CORBA Bridge (Task 7.0).

  7. DEVELOPMENT OF TECHNOLOGIES AND ANALYTICAL CAPABILITIES FOR VISION 21 ENERGY PLANTS

    SciTech Connect (OSTI)

    Madhava Syamlal, Ph.D.

    2002-04-01

    A software review meeting was held at Fluent Inc. in Lebanon, NH on January 31-February 1, 2002. The team reviewed the current status of the software and its compliance with the software requirements (Task 2). Work on a fuel cell based power-plant flow sheet that incorporates a reformer CFD model was started. This test case includes more features (multiple ports, temperature dependent properties) than the mixing tank test case developed earlier and will be used for the further testing of the software (Task 2). The software development plan was finalized (Task 2.7). The design and implementation of a CFD database was commenced. The CFD database would store various models that a process analyst can use in the flowsheet model (Task 2.8). The COM-CORBA Bridge was upgraded to use the recently published version 0.9.3 CAPE-OPEN specifications. Work on transferring reaction kinetics data from Aspen Plus to Fluent was started (Task 2.11). The requirements for extending CAPE-OPEN interfaces in Aspen Plus to transfer temperature dependent properties to Fluent was written and communicated to the Aspen Tech developer of CAPE-OPEN interfaces (Task 2.12). A prototype of low-order model based on the Multiple Regression technique was written. A low-order model is required to speed up the calculations with the integrated model (Task 2.19). The Berkshire Power (Agawam, MA) combined-cycle power plant was selected as the Demonstration Case 2 (Task 3.2). A CFD model of the furnace in Demonstration Case 1 was developed. The furnace model will be incorporated into the flowsheet model already developed for this case (Task 4.1). A new hire joined the Fluent development team for this project. The project management plan was revised based on the software development plan. A presentation on the project status was made at the Clearwater Conference, March 4-7, 2002. The final manuscript for ESCAPE-12 conference was submitted (Task 7.0).

  8. Subsidence due to fluid withdrawal: a survey of analytical capabilities. [1225 citations

    SciTech Connect (OSTI)

    Engi, D.

    1985-08-01

    An extensive review of the literature was conducted in the area of land subsidence due to the withdrawal of fluids. A method of categorizing the citations was developed to facilitate identification of references relating to specific fields of interest. A brief review of the materials represented by the bibliography indicates the state-of-the-art within this area. The bibliography (containing 1225 citations) is presented in its categorized form. 5 figs., 3 tabs.

  9. Development of an analysis capability for the National Transportation System

    SciTech Connect (OSTI)

    Anson, D.; Nelson, R.

    1997-10-24

    The purpose of this report is to examine the Department of Transportation`s (DOT) National Transportation System (NTS) initiative, to document what has been learned, and to outline a National Transportation Network Analysis Capability (NTNAC) based on a ``TRANSIMS-like`` approach. This study was conducted over a two month period at the end of FY1997. The scope of the effort was carefully defined to accommodate the short time horizon and to provide focus to a very large analytical problem. The objectives were to: (1) define the NTS and the NTS problem; (2) identify problem characteristics; (3) describe an analytical solution based on the TRANSIMS approach; (4) identify data requirements and availability; (5) develop criteria for a scenario to be used in a prototype demonstration; and (6) select a scenario for the prototype demonstration.

  10. A METHOD FOR ESTIMATING GAS PRESSURE IN 3013 CONTAINERS USING AN ISP DATABASE QUERY

    SciTech Connect (OSTI)

    Friday, G; L. G. Peppers, L; D. K. Veirs, D

    2008-07-31

    The U.S. Department of Energy's Integrated Surveillance Program (ISP) is responsible for the storage and surveillance of plutonium-bearing material. During storage, plutonium-bearing material has the potential to generate hydrogen gas from the radiolysis of adsorbed water. The generation of hydrogen gas is a safety concern, especially when a container is breached within a glove box during destructive evaluation. To address this issue, the DOE established a standard (DOE, 2004) that sets the criteria for the stabilization and packaging of material for up to 50 years. The DOE has now packaged most of its excess plutonium for long-term storage in compliance with this standard. As part of this process, it is desirable to know within reasonable certainty the total maximum pressure of hydrogen and other gases within the 3013 container if safety issues and compliance with the DOE standards are to be attained. The principal goal of this investigation is to document the method and query used to estimate total (i.e. hydrogen and other gases) gas pressure within a 3013 container based on the material properties and estimated moisture content contained in the ISP database. Initial attempts to estimate hydrogen gas pressure in 3013 containers was based on G-values (hydrogen gas generation per energy input) derived from small scale samples. These maximum G-values were used to calculate worst case pressures based on container material weight, assay, wattage, moisture content, container age, and container volume. This paper documents a revised hydrogen pressure calculation that incorporates new surveillance results and includes a component for gases other than hydrogen. The calculation is produced by executing a query of the ISP database. An example of manual mathematical computations from the pressure equation is compared and evaluated with results from the query. Based on the destructive evaluation of 17 containers, the estimated mean absolute pressure was significantly higher

  11. Computer systems and methods for the query and visualization of multidimensional databases

    DOE Patents [OSTI]

    Stolte, Chris; Tang, Diane L.; Hanrahan, Patrick

    2006-08-08

    A method and system for producing graphics. A hierarchical structure of a database is determined. A visual table, comprising a plurality of panes, is constructed by providing a specification that is in a language based on the hierarchical structure of the database. In some cases, this language can include fields that are in the database schema. The database is queried to retrieve a set of tuples in accordance with the specification. A subset of the set of tuples is associated with a pane in the plurality of panes.

  12. Computer systems and methods for the query and visualization of multidimensional database

    DOE Patents [OSTI]

    Stolte, Chris; Tang, Diane L.; Hanrahan, Patrick

    2010-05-11

    A method and system for producing graphics. A hierarchical structure of a database is determined. A visual table, comprising a plurality of panes, is constructed by providing a specification that is in a language based on the hierarchical structure of the database. In some cases, this language can include fields that are in the database schema. The database is queried to retrieve a set of tuples in accordance with the specification. A subset of the set of tuples is associated with a pane in the plurality of panes.

  13. Electrospray ion source with reduced analyte electrochemistry

    DOE Patents [OSTI]

    Kertesz, Vilmos; Van Berkel, Gary J

    2013-07-30

    An electrospray ion (ESI) source and method capable of ionizing an analyte molecule without oxidizing or reducing the analyte of interest. The ESI source can include an emitter having a liquid conduit, a working electrode having a liquid contacting surface, a spray tip, a secondary working electrode, and a charge storage coating covering partially or fully the liquid contacting surface of the working electrode. The liquid conduit, the working electrode and the secondary working electrode can be in liquid communication. The electrospray ion source can also include a counter electrode proximate to, but separated from, said spray tip. The electrospray ion source can also include a power system for applying a voltage difference between the working electrodes and a counter-electrode. The power system can deliver pulsed voltage changes to the working electrodes during operation of said electrospray ion source to minimize the surface potential of the charge storage coating.

  14. Electrospray ion source with reduced analyte electrochemistry

    DOE Patents [OSTI]

    Kertesz, Vilmos [Knoxville, TN; Van Berkel, Gary [Clinton, TN

    2011-08-23

    An electrospray ion (ESI) source and method capable of ionizing an analyte molecule without oxidizing or reducing the analyte of interest. The ESI source can include an emitter having a liquid conduit, a working electrode having a liquid contacting surface, a spray tip, a secondary working electrode, and a charge storage coating covering partially or fully the liquid contacting surface of the working electrode. The liquid conduit, the working electrode and the secondary working electrode can be in liquid communication. The electrospray ion source can also include a counter electrode proximate to, but separated from, said spray tip. The electrospray ion source can also include a power system for applying a voltage difference between the working electrodes and a counter-electrode. The power system can deliver pulsed voltage changes to the working electrodes during operation of said electrospray ion source to minimize the surface potential of the charge storage coating.

  15. Spark Distributed Analytic Framework

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Apache Spark Spark Distributed Analytic Framework Description and Overview Apache Spark(tm) is a fast and general engine for large-scale data processing. How to Use Spark Because of its high memory and I/O bandwidth requirements, we recommend you run your spark jobs on Cori. Follow the steps below to use spark, note that the order of the commands matters. DO NOT load the spark module until you are inside a batch job. Interactive mode Submit an interactive batch job with at least 2 nodes: salloc

  16. Materials Characterization Capabilities at the High Temperature...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Lightweighting Materials Materials Characterization Capabilities at the High Temperature Materials Laboratory: Focus Lightweighting Materials 2011 DOE Hydrogen and Fuel Cells ...

  17. Materials Characterization Capabilities at the High Temperature...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    More Documents & Publications Materials Characterization Capabilities at the High Temperature Materials Laboratory and HTML User Program Success Stories Materials Characterization ...

  18. "Multiscale Capabilities for Exploring Transport Phenomena in...

    Office of Scientific and Technical Information (OSTI)

    Country of Publication: United States Language: English Subject: 36 MATERIALS SCIENCE; 37 INORGANIC, ORGANIC, PHYSICAL AND ANALYTICAL CHEMISTRY; 37 INORGANIC, ORGANIC, PHYSICAL AND ...

  19. Destructive analysis capabilities for plutonium and uranium characterization at Los Alamos National Laboratory

    SciTech Connect (OSTI)

    Tandon, Lav; Kuhn, Kevin J; Drake, Lawrence R; Decker, Diana L; Walker, Laurie F; Colletti, Lisa M; Spencer, Khalil J; Peterson, Dominic S; Herrera, Jaclyn A; Wong, Amy S

    2010-01-01

    Los Alamos National Laboratory's (LANL) Actinide Analytical Chemistry (AAC) group has been in existence since the Manhattan Project. It maintains a complete set of analytical capabilities for performing complete characterization (elemental assay, isotopic, metallic and non metallic trace impurities) of uranium and plutonium samples in different forms. For a majority of the customers there are strong quality assurance (QA) and quality control (QC) objectives including highest accuracy and precision with well defined uncertainties associated with the analytical results. Los Alamos participates in various international and national programs such as the Plutonium Metal Exchange Program, New Brunswick Laboratory's (NBL' s) Safeguards Measurement Evaluation Program (SME) and several other inter-laboratory round robin exercises to monitor and evaluate the data quality generated by AAC. These programs also provide independent verification of analytical measurement capabilities, and allow any technical problems with analytical measurements to be identified and corrected. This presentation will focus on key analytical capabilities for destructive analysis in AAC and also comparative data between LANL and peer groups for Pu assay and isotopic analysis.

  20. VERDE Analytic Modules

    Energy Science and Technology Software Center (OSTI)

    2008-01-15

    The Verde Analytic Modules permit the user to ingest openly available data feeds about phenomenology (storm tracks, wind, precipitation, earthquake, wildfires, and similar natural and manmade power grid disruptions and forecast power outages, restoration times, customers outaged, and key facilities that will lose power. Damage areas are predicted using historic damage criteria of the affected area. The modules use a cellular automata approach to estimating the distribution circuits assigned to geo-located substations. Population estimates servedmore » within the service areas are located within 1 km grid cells and converted to customer counts by conversion through demographic estimation of households and commercial firms within the population cells. Restoration times are estimated by agent-based simulation of restoration crews working according to utility published prioritization calibrated by historic performance.« less

  1. Appendix C, Analytical Data | Department of Energy

    Energy Savers [EERE]

    C, Analytical Data Appendix C, Analytical Data Docket No. EO-05-01: Appendix C, Analytical Data from Final Report: Particulate Emissions Testing, Unit 1, Potomac River Generating ...

  2. National Criticality Experiments Research Center (NCERC) capabilities

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NCERC capabilities National Criticality Experiments Research Center (NCERC) capabilities WHEN: Feb 20, 2015 6:00 PM - 8:00 PM WHERE: Courtyard by Marriott Santa Fe, NM CONTACT: Evelyn Mullen 505-665-7576 CATEGORY: Science INTERNAL: Calendar Login Event Description This talk will provide an overview of the capabilities and machines of NCERC followed by a description of the process of restarting Godiva in a new location as presented at the 2014 ANS Winter Meeting. Los Alamos National Laboratory

  3. Advanced Simulation Capability for Environmental Management (ASCEM) |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Advanced Simulation Capability for Environmental Management (ASCEM) Advanced Simulation Capability for Environmental Management (ASCEM) Advanced Simulation Capability for Environmental Management (ASCEM) ASCEM is being developed to provide a tool and approach to facilitate robust and standardized development of performance and risk assessments for cleanup and closure activities throughout the EM complex. The ASCEM team is composed of scientists from eight National

  4. ORISE: Capabilities in Scientific Peer Review

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Related Link Best Practices in Peer Review Assure Quality, Value, Objectivity (PDF, 330KB) Journal of the National Grants Management Association Oak Ridge Institute for Science Education Capabilities in Scientific Peer Review ORISE Provides Extensive Capabilities in Managing Competitive Scientific Peer Reviews The Oak Ridge Institute for Science and Education (ORISE) manages scientific peer reviews for the U.S. Department of Energy (DOE) and other government agencies. Our capabilities span the

  5. Nanobio Interfaces Capabilities | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Nanobio Interfaces Capabilities Synthesis Synthesis of metal oxide, semiconducting, metallic, and magnetic nanoparticles Self-assembly of monodisperse nanoparticles into two- and...

  6. "Multiscale Capabilities for Exploring Transport Phenomena in...

    Office of Scientific and Technical Information (OSTI)

    in Batteries": Ab Initio Calculations on Defective LiFePO4 Citation Details In-Document Search Title: "Multiscale Capabilities for Exploring Transport Phenomena in Batteries": Ab ...

  7. Materials Characterization Capabilities at the High Temperature...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Temperature Materials Laboratory (HTML) User Program Materials Characterization Capabilities at the High Temperature Materials Laboratory and HTML User Program Success Stories ...

  8. Materials Characterization Capabilities at the High Temperature...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Laboratory and HTML User Program Success Stories Materials Characterization Capabilities at the High Temperature Materials Laboratory and HTML User Program Success Stories 2012 DOE ...

  9. Materials Characterization Capabilities at the High Temperature...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Materials Laboratory and HTML User Program Success Stories Materials Characterization Capabilities at the High Temperature Materials Laboratory and HTML User Program Success ...

  10. Materials Characterization Capabilities at the HTML: Surface...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    HTML: SurfaceSub-surface dislocation density analysis of forming samples using advanced characterization techniques Materials Characterization Capabilities at the HTML: Surface...

  11. NREL: Concentrating Solar Power Research - Laboratory Capabilities

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    To research, develop, and test a variety of concentrating solar power technologies, NREL features the following laboratory capabilities: Concentrated Solar Radiation Facility Large ...

  12. Electronic & Magnetic Materials & Devices Capabilities | Argonne...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Electronic & Magnetic Materials & Devices Capabilities Synthesis Colloidal chemistry and self-assembly techniques Complex oxide film synthesis via molecular beam epitaxy (DCA R450...

  13. The Cielo Petascale Capability Supercomputer: Providing Large...

    Office of Scientific and Technical Information (OSTI)

    Title: The Cielo Petascale Capability Supercomputer: Providing Large-Scale Computing for Stockpile Stewardship Authors: Vigil, Benny Manuel 1 ; Doerfler, Douglas W. 1 + Show ...

  14. Materials Characterization Capabilities at the High Temperature...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    -- Washington D.C. PDF icon lm028laracurzio2010o.pdf More Documents & Publications Materials Characterization Capabilities at the High Temperature Materials Laboratory and...

  15. Electricity Subsector Cybersecurity Capability Maturity Model...

    Office of Environmental Management (EM)

    and prioritize their actions and investments to improve cybersecurity, combines ... 2013 - Wednesday, June 5, 2013 Oil and Natural Gas Subsector Cybersecurity Capability ...

  16. Federal Technical Capability Panel Conference Call Minutes -...

    Energy Savers [EERE]

    Federal Technical Capability Panel Conference Call Minutes January 20, 2016 Karen Boardman, Chair, not in attendance. Participating in DOE HQ Conference Call. Dave Chaney, Deputy ...

  17. Stiff DAE integrator with sensitivity analysis capabilities

    Energy Science and Technology Software Center (OSTI)

    2007-11-26

    IDAS is a general purpose (serial and parallel) solver for differential equation (ODE) systems with senstivity analysis capabilities. It provides both forward and adjoint sensitivity analysis options.

  18. ADVANCED SIMULATION CAPABILITY FOR ENVIRONMENTAL MANAGEMENT

    Office of Scientific and Technical Information (OSTI)

    Key words: Environmental management; Simulation; Model; ... (GS-3, GS-4). 5. Develop predictive capabilities to ... to queue systems that control access Usability ...

  19. ASCEM Software Capabilities and Performance Assessment Deployments...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ASCEM Software Capabilities and Performance Assessment Deployments Greg Flach ASCEM Site Applications Team Performance & Risk Assessment Community of Practice Technical Exchange ...

  20. Advanced simulation capability for environmental management ...

    Office of Scientific and Technical Information (OSTI)

    environmental management (ASCEM): An overview of initial results Citation Details In-Document Search Title: Advanced simulation capability for environmental management (ASCEM): An ...

  1. Electricity Subsector Cybersecurity Capability Maturity Model...

    Broader source: Energy.gov (indexed) [DOE]

    The Electricity Subsector Cybersecurity Capability Maturity Model (ES-C2M2) Version 1.1, which allows electric utilities and grid operators to assess their cybersecurity...

  2. Integrated Data Analysis to expand measurement capability

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Data Analysis to expand measurement capability Whitepaper submitted to DOE Workshop on Integrated Simulations for Magnetic Fusion Energy Sciences Primary topic: F (Data management, ...

  3. Cybersecurity Capability Maturity Model - Frequently Asked Questions...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    The Cybersecurity Capability Maturity Model (C2M2) program is intended to aid organizations of all types evaluate and make improvements to their cybersecurity programs. The model ...

  4. Cybersecurity Capability Maturity Model - Facilitator Guide ...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    The Cybersecurity Capability Maturity Model (C2M2) program is intended to aid organizations of all types evaluate and make improvements to their cybersecurity programs. The model ...

  5. ORISE: Helping Strengthen Emergency Response Capabilities for...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Ridge Institute for Science and Education (ORISE) helps strengthen government agencies' emergency response capabilities through a variety of exercises, from tabletop training to...

  6. NREL: Process Development and Integration Laboratory - Capabilities

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Most of these research and development (R&D) capabilities are associated with specific cluster tools for modular deposition, processing, and characterization techniques. The...

  7. Ecologic Analytics | Open Energy Information

    Open Energy Info (EERE)

    Analytics Place: Bloomington, Minnesota Zip: 55425 Product: Minnesota-based meter data management company. Coordinates: 42.883574, -90.926122 Show Map Loading map......

  8. Analytical Modeling | Open Energy Information

    Open Energy Info (EERE)

    & Analytical Models Website - University of Washington, Department of Economic Business and Geography Page Area Activity Start Date Activity End Date Reference Material...

  9. Y-12 completes $10M upgrades to Analytical Chemistry facility | Y-12

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    National Security Complex $10M ... Y-12 completes $10M upgrades to Analytical Chemistry facility Posted: April 14, 2016 - 12:02pm OAK RIDGE, Tenn. - The Y-12 National Security Complex has completed significant infrastructure upgrades to the plant's Analytical Chemistry facility to improve mission capability and reliability. The year-long effort was completed on schedule and budget. Built in 1957, Building 9995 provides comprehensive analytical services in support of core missions,

  10. advanced radiographic capability | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    advanced radiographic capability ARC will make tiny "movies" of thermonuclear and stockpile experiments The National Ignition Facility's (NIF) performed the first programmatic experiments with Advanced Radiographic Capability (ARC) on December 1-3, 2015. ARC, a petawatt-class laser with peak power that will exceed a quadrillion watts, is designed to produce brighter, more penetrating, higher-energy

  11. Analytical laboratory quality audits

    SciTech Connect (OSTI)

    Kelley, William D.

    2001-06-11

    Analytical Laboratory Quality Audits are designed to improve laboratory performance. The success of the audit, as for many activities, is based on adequate preparation, precise performance, well documented and insightful reporting, and productive follow-up. Adequate preparation starts with definition of the purpose, scope, and authority for the audit and the primary standards against which the laboratory quality program will be tested. The scope and technical processes involved lead to determining the needed audit team resources. Contact is made with the auditee and a formal audit plan is developed, approved and sent to the auditee laboratory management. Review of the auditee's quality manual, key procedures and historical information during preparation leads to better checklist development and more efficient and effective use of the limited time for data gathering during the audit itself. The audit begins with the opening meeting that sets the stage for the interactions between the audit team and the laboratory staff. Arrangements are worked out for the necessary interviews and examination of processes and records. The information developed during the audit is recorded on the checklists. Laboratory management is kept informed of issues during the audit so there are no surprises at the closing meeting. The audit report documents whether the management control systems are effective. In addition to findings of nonconformance, positive reinforcement of exemplary practices provides balance and fairness. Audit closure begins with receipt and evaluation of proposed corrective actions from the nonconformances identified in the audit report. After corrective actions are accepted, their implementation is verified. Upon closure of the corrective actions, the audit is officially closed.

  12. CTH reference manual : composite capability and technologies.

    SciTech Connect (OSTI)

    Key, Christopher T.; Schumacher, Shane C.

    2009-02-01

    The composite material research and development performed over the last year has greatly enhanced the capabilities of CTH for non-isotropic materials. The enhancements provide the users and developers with greatly enhanced capabilities to address non-isotropic materials and their constitutive model development. The enhancements to CTH are intended to address various composite material applications such as armor systems, rocket motor cases, etc. A new method for inserting non-isotropic materials was developed using Diatom capabilities. This new insertion method makes it possible to add a layering capability to a shock physics hydrocode. This allows users to explicitly model each lamina of a composite without the overhead of modeling each lamina as a separate material to represent a laminate composite. This capability is designed for computational speed and modeling efficiency when studying composite material applications. In addition, the layering capability also allows a user to model interlaminar mechanisms. Finally, non-isotropic coupling methods have been investigated. The coupling methods are specific to shock physics where the Equation of State (EOS) is used with a nonisotropic constitutive model. This capability elastically corrects the EOS pressure (typically isotropic) for deviatoric pressure coupling for non-isotropic materials.

  13. Innovative technology summary report: Road Transportable Analytical Laboratory (RTAL)

    SciTech Connect (OSTI)

    1998-10-01

    The Road Transportable Analytical Laboratory (RTAL) has been used in support of US Department of Energy (DOE) site and waste characterization and remediation planning at Fernald Environmental Management Project (FEMP) and is being considered for implementation at other DOE sites, including the Paducah Gaseous Diffusion Plant. The RTAL laboratory system consists of a set of individual laboratory modules deployable independently or as an interconnected group to meet each DOE site`s specific analysis needs. The prototype RTAL, deployed at FEMP Operable Unit 1 Waste Pits, has been designed to be synergistic with existing analytical laboratory capabilities, thereby reducing the occurrence of unplanned rush samples that are disruptive to efficient laboratory operations.

  14. PCI Capability Development and Challenge Problem Progress

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    BISON Fuel Performance Code: Capability Overview and V&V Status and Plans Rich Williamson, ... Assurance - V&V Status and Plans for LWR fuel - PCMI and RIA Benchmarks - Uncertainty ...

  15. Sandia National Laboratories: Other Facilities and Capabilities

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Other Facilities and Capabilities High Voltage Breakdown Testing We can perform high voltage standoff testing with DC and pulsed voltages. DC testing can be conducted up to 200 kV....

  16. NREL: Biomass Research - Biomass Characterization Capabilities

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Biomass Characterization Capabilities A photo of a man wearing a white lab coat and looking into a large microscope. A researcher uses an Atomic Force Microscope to image enzymes...

  17. NERSC Enhances PDSF, Genepool Computing Capabilities

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Enhances PDSF, Genepool Computing Capabilities NERSC Enhances PDSF, Genepool Computing Capabilities Linux cluster expansion speeds data access and analysis January 3, 2014 Christmas came early for users of the Parallel Distributed Systems Facility (PDSF) and Genepool systems at Department of Energy's National Energy Research Scientific Computer Center (NERSC). Throughout November members of NERSC's Computational Systems Group were busy expanding the Linux computing resources that support PDSF's

  18. IBM Probes Material Capabilities at the ALS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    IBM Probes Material Capabilities at the ALS IBM Probes Material Capabilities at the ALS Print Wednesday, 12 February 2014 11:05 Vanadium dioxide, one of the few known materials that acts like an insulator at low temperatures but like a metal at warmer temperatures, is a somewhat futuristic material that could yield faster and much more energy-efficient electronic devices. Researchers from IBM's forward-thinking Spintronic Science and Applications Center (SpinAps) recently used the ALS to gain

  19. Science, Technology, and Engineering Capability Reviews

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    PADSTE » Capability Reviews Science, Technology, and Engineering Capability Reviews Measuring and continuously improving the quality of the Laboratory's science, technology, and engineering Contact Us Point of Contact Cathy Christoffersen Email Point of Contact Teresa Garcia Email Time-lapse images of supercritical CO2 displacing water in a shale fracture Time-lapse images of supercritical CO2 displacing water in a shale fracture Assessing the quality of the Lab's ST&E Los Alamos uses

  20. Theory and Modeling Capabilities | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Theory and Modeling Capabilities Theory and multiscale computer simulations provide the interpretive and predictive framework to understand fundamental processes and to aid in the design of functional nanoscale systems. Our primary facility is a high-performance computing cluster accommodating parallel computer-intensive applications. Capabilities Carbon High-Performance Computing Cluster (3000 cores, 30 GPUs, ~30 TeraFLOPS) Development tools (GNU and Intel compilers and math libraries) Density

  1. Audit Report - Office of Secure Transportation Capabilities

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Office of Secure Transportation Capabilities OAS-M-12-05 June 2012 Department of Energy Washington, DC 20585 June 29, 2012 UN MEMORANDUM FOR THE ASSISTANT DEPUTY ADMINISTRATOR, OFFICE OF SECURE TRANSPORTATION FROM: George W. Collard Assistant Inspector General for Audits Office of Inspector General SUBJECT: INFORMATION: Audit Report on "Office of Secure Transportation Capabilities" BACKGROUND The National Nuclear Security Administration's Office of Secure Transportation (OST) is

  2. Facility Interface Capability Assessment (FICA) project report

    SciTech Connect (OSTI)

    Pope, R.B.; MacDonald, R.R.; Viebrock, J.M.; Mote, N.

    1995-09-01

    The US Department of Energy`s (DOE) Office of Civilian Radioactive Waste Management (OCRWM) is responsible for developing the Civilian Radioactive Waste Management System (CRWMS) to accept spent nuclear fuel from commercial facilities. The objective of the Facility Interface Capability Assessment (FICA) project was to assess the capability of each commercial spent nuclear fuel (SNF) storage facility, at which SNF is stored, to handle various SNF shipping casks. The purpose of this report is to present and analyze the results of the facility assessments completed within the FICA project. During Phase 1, the data items required to complete the facility assessments were identified and the database for the project was created. During Phase 2, visits were made to 122 facilities on 76 sites to collect data and information, the database was updated, and assessments of the cask-handling capabilities at each facility were performed. Each assessment of cask-handling capability contains three parts: the current capability of the facility (planning base); the potential enhanced capability if revisions were made to the facility licensing and/or administrative controls; and the potential enhanced capability if limited physical modifications were made to the facility. The main conclusion derived from the planning base assessments is that the current facility capabilities will not allow handling of any of the FICA Casks at 49 of the 122 facilities evaluated. However, consideration of potential revisions and/or modifications showed that all but one of the 49 facilities could be adapted to handle at least one of the FICA Casks. For this to be possible, facility licensing, administrative controls, and/or physical aspects of the facility would need to be modified.

  3. Sandia National Laboratories: Research: Bioscience Enabling Capabilities

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Enabling Capabilities Leveraging biology and engineering for new solutions Sandia's ability to form and optimize multidisciplinary teams is a key enabler behind many of our high-impact solutions to the nation's most pressing security challenges. In keeping with this tradition, Sandia bioscientists work closely with experts in other science and engineering fields to enlarge capabilities for biological exploration. Drawing on their combined knowledge and ideas, teams work to translate their

  4. Cybersecurity Capability Maturity Model - Frequently Asked Questions

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    (February 2014) | Department of Energy - Frequently Asked Questions (February 2014) Cybersecurity Capability Maturity Model - Frequently Asked Questions (February 2014) The Cybersecurity Capability Maturity Model (C2M2) program is intended to aid organizations of all types evaluate and make improvements to their cybersecurity programs. The model focuses on the implementation and management of cybersecurity practices associated with the information technology (IT) and operational technology

  5. IBM Probes Material Capabilities at the ALS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    IBM Probes Material Capabilities at the ALS IBM Probes Material Capabilities at the ALS Print Wednesday, 12 February 2014 11:05 Vanadium dioxide, one of the few known materials that acts like an insulator at low temperatures but like a metal at warmer temperatures, is a somewhat futuristic material that could yield faster and much more energy-efficient electronic devices. Researchers from IBM's forward-thinking Spintronic Science and Applications Center (SpinAps) recently used the ALS to gain

  6. Chapter 9 - Enabling Capabilities for Science and Energy | Department...

    Energy Savers [EERE]

    9 - Enabling Capabilities for Science and Energy Chapter 9 - Enabling Capabilities for Science and Energy Chapter 9 - Enabling Capabilities for Science and Energy Basic science ...

  7. Functionalized magnetic nanoparticle analyte sensor

    DOE Patents [OSTI]

    Yantasee, Wassana; Warner, Maryin G; Warner, Cynthia L; Addleman, Raymond S; Fryxell, Glen E; Timchalk, Charles; Toloczko, Mychailo B

    2014-03-25

    A method and system for simply and efficiently determining quantities of a preselected material in a particular solution by the placement of at least one superparamagnetic nanoparticle having a specified functionalized organic material connected thereto into a particular sample solution, wherein preselected analytes attach to the functionalized organic groups, these superparamagnetic nanoparticles are then collected at a collection site and analyzed for the presence of a particular analyte.

  8. Analytical Tools | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Information Resources » Analytical Tools Analytical Tools The Bioenergy Technologies Office and its national lab partners provide a variety of online tools to help analyze data and facilitate decision making. This page links to several of them and includes a widget that calculates the potential volume of ethanol produced from biomass feedstocks. Knowledge Discovery Framework (KDF): The Bioenergy Knowledge Discovery Framework (KDF) facilitates informed decision making by providing a means to

  9. Laboratory Analytical Procedures | Bioenergy | NREL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Laboratory Analytical Procedures NREL develops laboratory analytical procedures (LAPs) to provide validated methods for biofuels and pyrolysis bio-oils research. Biomass Compositional Analysis These lab procedures provide tested and accepted methods for performing analyses commonly used in biofuels research. Bio-Oil Analysis These lab procedures allow for the analysis of raw and upgraded pyrolysis bio-oils. Microalgae Compositional Analysis These lab procedures help scientists and researchers

  10. General analytical evaluation program (GAE): Final report, 1979--1984

    SciTech Connect (OSTI)

    Not Available

    1989-05-01

    The General Analytical Evaluation Program monitored measurement capabilities of nine participating laboratories on uranium materials representative of those commonly encountered in scrap recovery and fuel production operations. This report presents and evaluates measurement data produced by the participants from October 1979 through June 1984. Two types of measurements are presented: measurements of the uranium in the sample (both uranium concentration and U-235 isotopic abundance) and measurements of twelve nonvolatile impurities contained in the sample. 237 figs., 8 tabs.

  11. OCIO Technology Summit: Data Analytics | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    at the Energy Information Administration demonstrated the Electricity Data Browser influence on creating the visualization of data, bringing together maps, query tools, and...

  12. Web-based Visual Analytics for Extreme Scale Climate Science

    SciTech Connect (OSTI)

    Steed, Chad A; Evans, Katherine J; Harney, John F; Jewell, Brian C; Shipman, Galen M; Smith, Brian E; Thornton, Peter E; Williams, Dean N.

    2014-01-01

    In this paper, we introduce a Web-based visual analytics framework for democratizing advanced visualization and analysis capabilities pertinent to large-scale earth system simulations. We address significant limitations of present climate data analysis tools such as tightly coupled dependencies, ineffi- cient data movements, complex user interfaces, and static visualizations. Our Web-based visual analytics framework removes critical barriers to the widespread accessibility and adoption of advanced scientific techniques. Using distributed connections to back-end diagnostics, we minimize data movements and leverage HPC platforms. We also mitigate system dependency issues by employing a RESTful interface. Our framework embraces the visual analytics paradigm via new visual navigation techniques for hierarchical parameter spaces, multi-scale representations, and interactive spatio-temporal data mining methods that retain details. Although generalizable to other science domains, the current work focuses on improving exploratory analysis of large-scale Community Land Model (CLM) and Community Atmosphere Model (CAM) simulations.

  13. Facility Interface Capability Assessment (FICA) summary report

    SciTech Connect (OSTI)

    Viebrock, J.M.; Mote, N. ); Pope, R.B. )

    1992-05-01

    The Office of Civilian Radioactive Waste Management (OCRWM) is responsible for developing the Civilian Radioactive Waste Management System (CRWMS) to accept spent nuclear fuel from the commercial facilities. In support of the development of the CRWMS, OCRWM sponsored the Facility Interface Capability Assessment (FICA) project. The objective of this project was to assess the capability of each commercial facility to handle various spent nuclear fuel shipping casks. The purpose of this report is to summarize the results of the facility assessments completed within the FICA project. The project was conducted in two phases. During Phase I, the data items required to complete the facility assessments were identified and the data base for the project was created. During Phase II, visits were made to 122 facilities on 76 sites to collect data and information, the data base was updated, and assessments of the cask-handling capabilities at each facility were performed.

  14. Trends in Microfabrication Capabilities & Device Architectures.

    SciTech Connect (OSTI)

    Bauer, Todd; Jones, Adam; Lentine, Anthony L.; Mudrick, John; Okandan, Murat; Rodrigues, Arun F.

    2015-06-01

    The last two decades have seen an explosion in worldwide R&D, enabling fundamentally new capabilities while at the same time changing the international technology landscape. The advent of technologies for continued miniaturization and electronics feature size reduction, and for architectural innovations, will have many technical, economic, and national security implications. It is important to anticipate possible microelectronics development directions and their implications on US national interests. This report forecasts and assesses trends and directions for several potentially disruptive microfabrication capabilities and device architectures that may emerge in the next 5-10 years.

  15. PCI Capability Development and Challenge Problem Progress

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    6-000 PCI Capability Development and Challenge Problem Progress Joe Rashid 1 , Brian D. Wirth 2 , Rich Williamson 3 1 ANATECH Corp 2 University of Tennessee 3 Idaho National Laboratory 2 CASL-U-2016-1086-000 Outline * State of the art of PCI & Fuel Performance Codes (FPCs) * FPCs compatibility with Utilities needs - what are the gaps? Can BISON close these gaps? * PCI Capability Development: BISON progress to-date * BISON as a Phase-2 product - will it fulfill its promise? 3

  16. Cloud-based Architecture Capabilities Summary Report

    SciTech Connect (OSTI)

    Vang, Leng; Prescott, Steven R; Smith, Curtis

    2014-09-01

    In collaborating scientific research arena it is important to have an environment where analysts have access to a shared of information documents, software tools and be able to accurately maintain and track historical changes in models. A new cloud-based environment would be accessible remotely from anywhere regardless of computing platforms given that the platform has available of Internet access and proper browser capabilities. Information stored at this environment would be restricted based on user assigned credentials. This report reviews development of a Cloud-based Architecture Capabilities (CAC) as a web portal for PRA tools.

  17. PV Performance and Reliability Validation Capabilities at Sandia...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Performance and Reliability Validation Capabilities at Sandia National Laboratories PV Performance and Reliability Validation Capabilities at Sandia National Laboratories This ...

  18. Combined Heat and Power Systems (CHP): Capabilities (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2013-07-01

    D&MT Capabilities fact sheet that describes the NREL capabilities related to combined heat and power (CHP).

  19. Connectivity To Atmospheric Release Advisory Capability

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2001-02-26

    To establish DOE and NNSA connectivity to Atmospheric Release Advisory Capability (ARAC) for sites and facilities that have the potential for releasing hazardous materials sufficient to generate certain emergency declarations and to promote efficient use of resources for consequence assessment activities at DOE sites, facilities, operations, and activities in planning for and responding to emergency events. No cancellations.

  20. Fuel Fabrication Capability Research and Development Plan

    SciTech Connect (OSTI)

    Senor, David J.; Burkes, Douglas

    2013-06-28

    The purpose of this document is to provide a comprehensive review of the mission of the Fuel Fabrication Capability (FFC) within the Global Threat Reduction Initiative (GTRI) Convert Program, along with research and development (R&D) needs that have been identified as necessary to ensuring mission success. The design and fabrication of successful nuclear fuels must be closely linked endeavors.

  1. EM Leads with Advanced Simulation Capability Technology

    Broader source: Energy.gov [DOE]

    WASHINGTON, D.C. – Since 2010, EM’s Office of Soil and Groundwater Remediation has initiated technology development programs such as the Advanced Simulation Capability for Environmental Management (ASCEM) and the Applied Field Research Initiatives to enhance characterization and remediation technologies and create cost savings.

  2. Plutonium Oxide Process Capability Work Plan

    SciTech Connect (OSTI)

    Meier, David E.; Tingey, Joel M.

    2014-02-28

    Pacific Northwest National Laboratory (PNNL) has been tasked to develop a Pilot-scale Plutonium-oxide Processing Unit (P3U) providing a flexible capability to produce 200g (Pu basis) samples of plutonium oxide using different chemical processes for use in identifying and validating nuclear forensics signatures associated with plutonium production. Materials produced can also be used as exercise and reference materials.

  3. Superhydrophobic analyte concentration utilizing colloid-pillar...

    Office of Scientific and Technical Information (OSTI)

    Superhydrophobic analyte concentration utilizing colloid-pillar array SERS substrates Citation Details In-Document Search Title: Superhydrophobic analyte concentration utilizing ...

  4. Hydrogen Fuel Quality - Focus: Analytical Methods Development...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Fuel Quality - Focus: Analytical Methods Development & Hydrogen Fuel Quality Results Hydrogen Fuel Quality - Focus: Analytical Methods Development & Hydrogen Fuel Quality Results ...

  5. Analytical Chemistry Laboratory | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Chemistry Laboratory provides a broad range of analytical chemistry support services to the scientific and engineering programs. AnalyticalChemistryLaboratoryfactsheet...

  6. Savannah River Analytical Laboratories Achieve International...

    National Nuclear Security Administration (NNSA)

    Savannah River Analytical Laboratories Achieve International Standard Accreditation Tuesday, September 8, 2015 - 12:55pm Savannah River National Laboratory's FH Analytical ...

  7. Testing the Delayed Gamma Capability in MCNP6

    SciTech Connect (OSTI)

    Weldon, Robert A.; Fensin, Michael L.; Mckinney, Gregg W.

    2014-01-01

    The mission of the Domestic Nuclear Detection Office is to quickly and reliably detect unauthorized attempts to import or transport special nuclear material for use against the United States. Developing detection equipment to meet this objective requires accurate simulation of both the detectable signature and detection mechanism. A delayed particle capability was initially added to MCNPX 2.6.A in 2005 to sample the radioactive fission product parents and emit decay particles resulting from the decay chain. To meet the objectives of detection scenario modelling, the capability was designed to sample a particular time for emitting particular multiplicity of a particular energy. Because the sampling process of selecting both time and energy is interdependent, to linearize the time and emission sampling, atom densities are computed at several discrete time steps, and the time integrated production is computed by multiplying the atom density by the decay constant and time step size to produce a cumulative distribution function for sampling the emission time, energy and multiplicity. The delayed particle capability was initially given a time bin structure to help reasonably reproduce, from a qualitative sense, a fission benchmark by D. Beddingfield, which examined the delayed gamma emission. This original benchmark was only qualitative and did not contain the magnitudes of the actual measured data, but did contain relative graphical representation of the spectra. A better benchmark with measured data was later provided by A. W.Hunt, Vladimir Mozin, E.T.E. Reedy, H.A. Selpel and Steve Tobin at the Idaho Accelerator Center; however, due to the complexity of the benchmark setup, sizable systematic errors were expected in the modeling, and initial results compared to MCNPX 2.7.0 showed errors outside of statistical fluctuation. Presented here is a more simplified approach to benchmarking, utilizing closed form analytic solutions to the granddaughter equations for 2

  8. Leak detection capability in CANDU reactors

    SciTech Connect (OSTI)

    Azer, N.; Barber, D.H.; Boucher, P.J.

    1997-04-01

    This paper addresses the moisture leak detection capability of Ontario Hydro CANDU reactors which has been demonstrated by performing tests on the reactor. The tests confirmed the response of the annulus gas system (AGS) to the presence of moisture injected to simulate a pressure tube leak and also confirmed the dew point response assumed in leak before break assessments. The tests were performed on Bruce A Unit 4 by injecting known and controlled rates of heavy water vapor. To avoid condensation during test conditions, the amount of moisture which could be injected was small (2-3.5 g/hr). The test response demonstrated that the AGS is capable of detecting and annunciating small leaks. Thus confidence is provided that it would alarm for a growing pressure tube leak where the leak rate is expected to increase to kg/hr rapidly. The measured dew point response was close to that predicted by analysis.

  9. Analytical Spectroscopy - Energy Innovation Portal

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Industrial Technologies Industrial Technologies Find More Like This Return to Search Analytical Spectroscopy Idaho National Laboratory Contact INL About This Technology Technology Marketing Summary The use of lasers has become increasingly widespread, especially for manufacturing products and material analysis. Recently, laser desorption (LD) techniques for mass spectrometry have attracted attention because it produces intact molecular ions, avoids surface charging issues, and allows tuning of

  10. Sandia National Laboratories: Other Facilities and Capabilities

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Other Facilities and Capabilities High Voltage Breakdown Testing We can perform high voltage standoff testing with DC and pulsed voltages. DC testing can be conducted up to 200 kV. Pulsed voltage from 140 - 400 kV can be attained, with a typical lightning waveform - unipolar, 1.2 microsecond risetime and 50 microsecond pulse width. Testing is conducted in humidity-controlled chambers. Breakdown voltage and current can be measured. Small TEM Cell We have a small transverse electromagnetic (TEM)

  11. Nanofabrication and Devices Capabilities | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Nanofabrication and Devices Capabilities The CNM's ability to fabricate complex nanostructures and devices is based on the advanced tool set housed within the Nanofabrication & Devices Group's clean room. The bay-and-chase configured clean room spans over 11,500 sq. ft. and contains a remarkable depth and breadth of nanofabrication equipment. The clean room staff have over 100 combined years of experience in fabrication, processing, and MEMS design, development, and manufacturing. See below

  12. Manufacturing fuel-switching capability, 1988

    SciTech Connect (OSTI)

    Not Available

    1991-09-01

    Historically, about one-third of all energy consumed in the United States has been used by manufacturers. About one-quarter of manufacturing energy is used as feedstocks and raw material inputs that are converted into nonenergy products; the remainder is used for its energy content. During 1988, the most recent year for which data are available, manufacturers consumed 15.5 quadrillion British thermal units (Btu) of energy to produce heat and power and to generate electricity. The manufacturing sector also has widespread capabilities to switch from one fuel to another for either economic or emergency reasons. There are numerous ways to define fuel switching. For the purposes of the Manufacturing Energy Consumption Survey (MECS), fuel switching is defined as the capability to substitute one energy source for another within 30 days with no significant modifications to the fuel-consuming equipment, while keeping production constant. Fuel-switching capability allows manufacturers substantial flexibility in choosing their mix of energy sources. The consumption of a given energy source can be maximized if all possible switching into that energy source takes place. The estimates in this report are based on data collected on the 1988 Manufacturing Energy Consumption Survey (MECS), Forms 846 (A through C). The EIA conducts this national sample survey of manufacturing energy consumption on a triennial basis. The MECS is the only comprehensive source of national-level data on energy-related information for the manufacturing industries. The MECS was first conducted in 1986 to collect data for 1985. This report presents information on the fuel-switching capabilities of manufacturers in 1988. This report is the second of a series based on the 1988 MECS. 8 figs., 31 tabs.

  13. Recombinant organisms capable of fermenting cellobiose

    DOE Patents [OSTI]

    Ingram, Lonnie O.; Lai, Xiaokuang; Moniruzzaman, Mohammed; York, Sean W.

    2000-01-01

    This invention relates to a recombinant microorganism which expresses pyruvate decarboxylase, alcohol dehydrogenase, Klebsiella phospho-.beta.-glucosidase and Klebsiella (phosphoenolpyruvate-dependent phosphotransferase system) cellobiose-utilizing Enzyme II, wherein said phospho-.beta.-glucosidase and said (phosphoenolpyruvate-dependent phosphotransferase) cellobiose-utilizing Enzyme II are heterologous to said microorganism and wherein said microorganism is capable of utilizing both hemicellulose and cellulose, including cellobiose, in the production of ethanol.

  14. LANSCE | Lujan Center | Instruments | ASTERIX | Capabilities

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Capabilities Surfaces and Interfaces Scientific Mission: Magnetic order with length scales ranging from nanometers to microns is critically important in technological applications. Examples include: exchange bias (the shift of the magnetic hysteresis loop about zero applied field)-a phenomenon used to establish the magnetic reference state for magnetic sensors, tunnel junctions etc., and pinned magnetic domains critical to large coercivity required of permanent magnets. Scattering of polarized

  15. Sandia National Laboratories: Programs & Capabilities

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Programs & Capabilities EM Program Areas Broadband EM response (EMR), electromagnetic pulse (EMP), electrostatic discharge (ESD), and Lightning System response to hostile (X-ray) environments, such as system-generated EM pulse (SGEMP) Lightning environment assessment of facilities and processes Pulsed Power model and analysis High voltage breakdown and arcing Terawatt beams and power flow analysis Antenna evaluation Development of validated, high physical-fidelity EM modeling and simulation

  16. Integrated Data Analysis to expand measurement capability

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Data Analysis to expand measurement capability Whitepaper submitted to DOE Workshop on Integrated Simulations for Magnetic Fusion Energy Sciences Primary topic: F (Data management, analysis, and assimilation) Secondary topic: C (Whole device modeling, especially validation) Oral presentation requested if time available D. J. Den Hartog, M. E. Galante, L. M. Reusch, M. D. Nornberg, and the MST Team University of Wisconsin-Madison, djdenhar@wisc.edu, April 2015 Challenge: Data produced by large

  17. A Visual Analytics Approach to Structured Data Analysis to Enhance Nonproliferation and Arms Control Verification Activities

    SciTech Connect (OSTI)

    Gillen, David S.

    2014-08-07

    Analysis activities for Nonproliferation and Arms Control verification require the use of many types of data. Tabular structured data, such as Excel spreadsheets and relational databases, have traditionally been used for data mining activities, where specific queries are issued against data to look for matching results. The application of visual analytics tools to structured data enables further exploration of datasets to promote discovery of previously unknown results. This paper discusses the application of a specific visual analytics tool to datasets related to the field of Arms Control and Nonproliferation to promote the use of visual analytics more broadly in this domain. Visual analytics focuses on analytical reasoning facilitated by interactive visual interfaces (Wong and Thomas 2004). It promotes exploratory analysis of data, and complements data mining technologies where known patterns can be mined for. Also with a human in the loop, they can bring in domain knowledge and subject matter expertise. Visual analytics has not widely been applied to this domain. In this paper, we will focus on one type of data: structured data, and show the results of applying a specific visual analytics tool to answer questions in the Arms Control and Nonproliferation domain. We chose to use the T.Rex tool, a visual analytics tool developed at PNNL, which uses a variety of visual exploration patterns to discover relationships in structured datasets, including a facet view, graph view, matrix view, and timeline view. The facet view enables discovery of relationships between categorical information, such as countries and locations. The graph tool visualizes node-link relationship patterns, such as the flow of materials being shipped between parties. The matrix visualization shows highly correlated categories of information. The timeline view shows temporal patterns in data. In this paper, we will use T.Rex with two different datasets to demonstrate how interactive exploration of

  18. Synthetic aperture radar capabilities in development

    SciTech Connect (OSTI)

    Miller, M.

    1994-11-15

    The Imaging and Detection Program (IDP) within the Laser Program is currently developing an X-band Synthetic Aperture Radar (SAR) to support the Joint US/UK Radar Ocean Imaging Program. The radar system will be mounted in the program`s Airborne Experimental Test-Bed (AETB), where the initial mission is to image ocean surfaces and better understand the physics of low grazing angle backscatter. The Synthetic Aperture Radar presentation will discuss its overall functionality and a brief discussion on the AETB`s capabilities. Vital subsystems including radar, computer, navigation, antenna stabilization, and SAR focusing algorithms will be examined in more detail.

  19. Chapter 9: Enabling Capabilities for Science and Energy | High-Performance Computing Capabilities and Allocations Supplemental Information

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Capabilities and Allocations User Facility Statistics Examples and Case Studies ENERGY U.S. DEPARTMENT OF Quadrennial Technology Review 2015 1 Quadrennial Technology Review 2015 High Performance Computing Capabilities and Resource Allocations Chapter 9: Enabling Capabilities for Science and Energy High Performance Computing Capabilities The Department of Energy (DOE) laboratories integrate high performance computing (HPC) capabilities into their energy, science, and national security missions.

  20. Federal Radiological Monitoring and Assessment Center Analytical Response

    SciTech Connect (OSTI)

    E.C. Nielsen

    2003-04-01

    The Federal Radiological Monitoring and Assessment Center (FRMAC) is authorized by the Federal Radiological Emergency Response Plan to coordinate all off-site radiological response assistance to state and local government s, in the event of a major radiological emergency in the United States. The FRMAC is established by the U.S. Department of Energy, National Nuclear Security Administration, to coordinate all Federal assets involved in conducting a comprehensive program of radiological environmental monitoring, sampling, radioanalysis, quality assurance, and dose assessment. During an emergency response, the initial analytical data is provided by portable field instrumentation. As incident responders scale up their response based on the seriousness of the incident, local analytical assets and mobile laboratories add additional capability and capacity. During the intermediate phase of the response, data quality objectives and measurement quality objectives are more rigorous. These higher objectives will require the use of larger laboratories, with greater capacity and enhanced capabilities. These labs may be geographically distant from the incident, which will increase sample management challenges. This paper addresses emergency radioanalytical capability and capacity and its utilization during FRMAC operations.

  1. Analyte detection using an active assay

    DOE Patents [OSTI]

    Morozov, Victor; Bailey, Charles L.; Evanskey, Melissa R.

    2010-11-02

    Analytes using an active assay may be detected by introducing an analyte solution containing a plurality of analytes to a lacquered membrane. The lacquered membrane may be a membrane having at least one surface treated with a layer of polymers. The lacquered membrane may be semi-permeable to nonanalytes. The layer of polymers may include cross-linked polymers. A plurality of probe molecules may be arrayed and immobilized on the lacquered membrane. An external force may be applied to the analyte solution to move the analytes towards the lacquered membrane. Movement may cause some or all of the analytes to bind to the lacquered membrane. In cases where probe molecules are presented, some or all of the analytes may bind to probe molecules. The direction of the external force may be reversed to remove unbound or weakly bound analytes. Bound analytes may be detected using known detection types.

  2. Low background screening capability in the UK

    SciTech Connect (OSTI)

    Ghag, Chamkaur

    2015-08-17

    Low background rare event searches in underground laboratories seeking observation of direct dark matter interactions or neutrino-less double beta decay have the potential to profoundly advance our understanding of the physical universe. Successful results from these experiments depend critically on construction from extremely radiologically clean materials and accurate knowledge of subsequent low levels of expected background. The experiments must conduct comprehensive screening campaigns to reduce radioactivity from detector components, and these measurements also inform detailed characterisation and quantification of background sources and their impact, necessary to assign statistical significance to any potential discovery. To provide requisite sensitivity for material screening and characterisation in the UK to support our rare event search activities, we have re-developed our infrastructure to add ultra-low background capability across a range of complementary techniques that collectively allow complete radioactivity measurements. Ultra-low background HPGe and BEGe detectors have been installed at the Boulby Underground Laboratory, itself undergoing substantial facility re-furbishment, to provide high sensitivity gamma spectroscopy in particular for measuring the uranium and thorium decay series products. Dedicated low-activity mass spectrometry instrumentation has been developed at UCL for part per trillion level contaminant identification to complement underground screening with direct U and Th measurements, and meet throughput demands. Finally, radon emanation screening at UCL measures radon background inaccessible to gamma or mass spectrometry techniques. With this new capability the UK is delivering half of the radioactivity screening for the LZ dark matter search experiment.

  3. NUCLEAR INCIDENT CAPABILITIES, KNOWLEDGE & ENABLER LEVERAGING

    SciTech Connect (OSTI)

    Kinney, J.; Newman, J.; Goodwyn, A.; Dewes, J.

    2011-04-18

    The detonation of a 10 Kiloton Improvised Nuclear Device (IND) is a serious scenario that the United States must be prepared to address. The likelihood of a single nuclear bomb exploding in a single city is greater today than at the height of the Cold War. Layered defenses against domestic nuclear terrorism indicate that our government continues to view the threat as credible. The risk of such an event is further evidenced by terrorists desire to acquire nuclear weapons. The act of nuclear terrorism, particularly an act directed against a large population center in the United States, will overwhelm the capabilities of many local and state governments to respond, and will seriously challenge existing federal response capabilities. A 10 Kiloton IND detonation would cause total infrastructure damage in a 3-mile radius and levels of radiation spanning out 3,000 square miles. In a densely populated urban area, the anticipated casualties would be in excess of several hundred thousand. Although there would be enormous loss of life, housing and infrastructure, an IND detonation is a recoverable event. We can reduce the risk of these high-consequence, nontraditional threats by enhancing our nuclear detection architecture and establishing well planned and rehearsed plans for coordinated response. It is also important for us to identify new and improved ways to foster collaboration regarding the response to the IND threat to ensure the demand and density of expertise required for such an event is postured and prepared to mobilize, integrate, and support a myriad of anticipated challenges. We must be prepared to manage the consequences of such an event in a deliberate manner and get beyond notions of total devastation by adopting planning assumptions around survivability and resiliency. Planning for such a scenario needs to be decisive in determining a response based on competencies and desired outcomes. It is time to synthesize known threats and plausible consequences into

  4. Guided Text Search Using Adaptive Visual Analytics

    SciTech Connect (OSTI)

    Steed, Chad A; Symons, Christopher T; Senter, James K; DeNap, Frank A

    2012-10-01

    This research demonstrates the promise of augmenting interactive visualizations with semi- supervised machine learning techniques to improve the discovery of significant associations and insights in the search and analysis of textual information. More specifically, we have developed a system called Gryffin that hosts a unique collection of techniques that facilitate individualized investigative search pertaining to an ever-changing set of analytical questions over an indexed collection of open-source documents related to critical national infrastructure. The Gryffin client hosts dynamic displays of the search results via focus+context record listings, temporal timelines, term-frequency views, and multiple coordinate views. Furthermore, as the analyst interacts with the display, the interactions are recorded and used to label the search records. These labeled records are then used to drive semi-supervised machine learning algorithms that re-rank the unlabeled search records such that potentially relevant records are moved to the top of the record listing. Gryffin is described in the context of the daily tasks encountered at the US Department of Homeland Security s Fusion Center, with whom we are collaborating in its development. The resulting system is capable of addressing the analysts information overload that can be directly attributed to the deluge of information that must be addressed in the search and investigative analysis of textual information.

  5. Deployment and Overview of RAVEN capabilities for (Technical...

    Office of Scientific and Technical Information (OSTI)

    Deployment and Overview of RAVEN capabilities for Citation Details In-Document Search Title: Deployment and Overview of RAVEN capabilities for Since the Beginning of 2012 Idaho ...

  6. Verification of J-integral capability in Sierra Mechanics. (Technical...

    Office of Scientific and Technical Information (OSTI)

    Verification of J-integral capability in Sierra Mechanics. Citation Details In-Document Search Title: Verification of J-integral capability in Sierra Mechanics. You are...

  7. Nuclear reaction and decay data evaluation capabilities at LANL...

    Office of Scientific and Technical Information (OSTI)

    Conference: Nuclear reaction and decay data evaluation capabilities at LANL Citation Details In-Document Search Title: Nuclear reaction and decay data evaluation capabilities at ...

  8. Development of Numerical Simulation Capabilities for In Situ...

    Office of Scientific and Technical Information (OSTI)

    Development of Numerical Simulation Capabilities for In Situ Heating of Oil Shale Citation Details In-Document Search Title: Development of Numerical Simulation Capabilities for In ...

  9. Improving Department of Energy Capabilities for Mitigating Beyond...

    Energy Savers [EERE]

    Improving Department of Energy Capabilities for Mitigating Beyond Design Basis Events Improving Department of Energy Capabilities for Mitigating Beyond Design Basis Events April ...

  10. Bubble Radiation Detection: Current and Future Capability (Technical...

    Office of Scientific and Technical Information (OSTI)

    Bubble Radiation Detection: Current and Future Capability Citation Details In-Document Search Title: Bubble Radiation Detection: Current and Future Capability Despite a number of ...

  11. ORISE: Capabilities in National Security and Emergency Management

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Capabilities ORISE Emergency Management Capabilities In preparation for a natural or man-made disaster, the Oak Ridge Institute for Science and Education (ORISE) provides national...

  12. DOE Efforts in Preparing and Improving First Response Capabilities...

    Office of Environmental Management (EM)

    Efforts in Preparing and Improving First Response Capabilities and Performance through Drills and Exercises DOE Efforts in Preparing and Improving First Response Capabilities and...

  13. FTCP Quarterly Report on Federal Technical Capability, February...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    3, 2011 FTCP Quarterly Report on Federal Technical Capability, February 23, 2011 This Quarterly Report on the Federal Technical Capability Program (FTCP) contains information on ...

  14. FTCP Quarterly Report on Federal Technical Capability, June 8...

    Office of Environmental Management (EM)

    8, 2010 FTCP Quarterly Report on Federal Technical Capability, June 8, 2010 This Quarterly Report on the Federal Technical Capability Program (FTCP) contains information on the ...

  15. FTCP Quarterly Report on Federal Technical Capability, March...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    22, 2010 FTCP Quarterly Report on Federal Technical Capability, March 22, 2010 This Quarterly Report on the Federal Technical Capability Program (FTCP) contains information on the ...

  16. FTCP Quarterly Report on Federal Technical Capability, August...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    0 FTCP Quarterly Report on Federal Technical Capability, August 16, 2010 This Quarterly Report on the Federal Technical Capability Program (FTCP) contains information on the status ...

  17. FTCP Quarterly Report on Federal Technical Capability, November...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    10, 2011 FTCP Quarterly Report on Federal Technical Capability, November 10, 2011 This Quarterly Report on the Federal Technical Capability Program (FTCP) contains information on ...

  18. FTCP Quarterly Report on Federal Technical Capability, August...

    Broader source: Energy.gov (indexed) [DOE]

    24-2011 (1.12 MB) More Documents & Publications FTCP Quarterly Report on Federal Technical Capability, August 16, 2010 FTCP Quarterly Report on Federal Technical Capability, ...

  19. FTCP Quarterly Report on Federal Technical Capability, November...

    Broader source: Energy.gov (indexed) [DOE]

    9-2010 (205.7 KB) More Documents & Publications FTCP Quarterly Report on Federal Technical Capability, August 16, 2010 FTCP Quarterly Report on Federal Technical Capability, June ...

  20. LANL Space Environment Capability (Technical Report) | SciTech...

    Office of Scientific and Technical Information (OSTI)

    Technical Report: LANL Space Environment Capability Citation Details In-Document Search Title: LANL Space Environment Capability Authors: Larsen, Brian Arthur 1 + Show Author ...

  1. Survey of Biomass Resource Assessments and Assessment Capabilities...

    Open Energy Info (EERE)

    Biomass Resource Assessments and Assessment Capabilities in APEC Economies Jump to: navigation, search Logo: Survey of Biomass Resource Assessments and Assessment Capabilities in...

  2. Nuclear reaction and decay data evaluation capabilities at LANL...

    Office of Scientific and Technical Information (OSTI)

    Nuclear reaction and decay data evaluation capabilities at LANL Citation Details In-Document Search Title: Nuclear reaction and decay data evaluation capabilities at LANL You ...

  3. Capabilities A.M. Jokisaari and K. Thornton

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Demonstration of Hyrax Capabilities A.M. Jokisaari and K. Thornton University of Michigan ... CASL-MPO Deliverable: Demonstration of Hyrax Capabilities A. M. Jokisaari, ...

  4. Local Energy Alliance Program Adds Green Appraisal Capabilities...

    Energy Savers [EERE]

    Local Energy Alliance Program Adds Green Appraisal Capabilities to its Energy Efficiency Services Local Energy Alliance Program Adds Green Appraisal Capabilities to its Energy ...

  5. Query and Visualization of extremely large network datasets over the web using Quadtree based KML Regional Network Links

    SciTech Connect (OSTI)

    Dadi, Upendra; Liu, Cheng; Vatsavai, Raju

    2009-01-01

    Geographic data sets are often very large in size. Interactive visualization of such data at all scales is not easy because of the limited resolution of the monitors and inability of visualization applications to handle the volume of data. This is especially true for large vector datasets. The end user s experience is frequently unsatisfactory when exploring such data over the web using a naive application. Network bandwidth is another contributing factor to the low performance. In this paper, a Quadtree based technique to visualize extremely large spatial network datasets over the web is described. It involves using custom developed algorithms leveraging a PostGIS database as the data source and Google Earth as the visualization client. This methodology supports both point and range queries along with non-spatial queries. This methodology is demonstrated using a network dataset consisting of several million links. The methodology is based on using some of the powerful features of KML (Keyhole Markup Language). Keyhole Markup Language (KML) is an Open Geospatial Consortium (OGC) standard for displaying geospatial data on Earth browsers. One of the features of KML is the notion of Network Links. Using network links, a wide range of geospatial data sources such as geodatabases, static files and geospatial data services can be simultaneously accessed and visualized seamlessly. Using the network links combined with Level of Detail principle, view based rendering and intelligent server and client-side caching, scalability in visualizing extremely large spatial datasets can be achieved.

  6. A Roadmap for NEAMS Capability Transfer

    SciTech Connect (OSTI)

    Bernholdt, David E

    2011-11-01

    The vision of the Nuclear Energy Advanced Modeling and Simulation (NEAMS) program is to bring truly predictive modeling and simulation (M&S) capabilities to the nuclear engineering community in order to enable a new approach to the design and analysis of nuclear energy systems. From its inception, the NEAMS program has always envisioned a broad user base for its software and scientific products, including researchers within the DOE complex, nuclear industry technology developers and vendors, and operators. However activities to date have focused almost exclusively on interactions with NEAMS sponsors, who are also near-term users of NEAMS technologies. The task of the NEAMS Capability Transfer (CT) program element for FY2011 is to develop a comprehensive plan to support the program's needs for user outreach and technology transfer. In order to obtain community input to this plan, a 'NEAMS Capability Transfer Roadmapping Workshop' was held 4-5 April 2011 in Chattanooga, TN, and is summarized in this report. The 30 workshop participants represented the NEAMS program, the DOE and industrial user communities, and several outside programs. The workshop included a series of presentations providing an overview of the NEAMS program and presentations on the user outreach and technology transfer experiences of (1) The Advanced Simulation and Computing (ASC) program, (2) The Standardized Computer Analysis for Licensing Evaluation (SCALE) project, and (3) The Consortium for Advanced Simulation of Light Water Reactors (CASL), followed by discussion sessions. Based on the workshop and other discussions throughout the year, we make a number of recommendations of key areas for the NEAMS program to develop the user outreach and technology transfer activities: (1) Engage not only DOE, but also industrial users sooner and more often; (2) Engage with the Nuclear Regulatory Commission to facilitate their understanding and acceptance of NEAMS approach to predictive M&S; (3) Place

  7. Analytical solution for two-phase flow in a wellbore using the drift-flux model

    SciTech Connect (OSTI)

    Pan, L.; Webb, S.W.; Oldenburg, C.M.

    2011-11-01

    This paper presents analytical solutions for steady-state, compressible two-phase flow through a wellbore under isothermal conditions using the drift flux conceptual model. Although only applicable to highly idealized systems, the analytical solutions are useful for verifying numerical simulation capabilities that can handle much more complicated systems, and can be used in their own right for gaining insight about two-phase flow processes in wells. The analytical solutions are obtained by solving the mixture momentum equation of steady-state, two-phase flow with an assumption that the two phases are immiscible. These analytical solutions describe the steady-state behavior of two-phase flow in the wellbore, including profiles of phase saturation, phase velocities, and pressure gradients, as affected by the total mass flow rate, phase mass fraction, and drift velocity (i.e., the slip between two phases). Close matching between the analytical solutions and numerical solutions for a hypothetical CO{sub 2} leakage problem as well as to field data from a CO{sub 2} production well indicates that the analytical solution is capable of capturing the major features of steady-state two-phase flow through an open wellbore, and that the related assumptions and simplifications are justified for many actual systems. In addition, we demonstrate the utility of the analytical solution to evaluate how the bottomhole pressure in a well in which CO{sub 2} is leaking upward responds to the mass flow rate of CO{sub 2}-water mixture.

  8. Advanced composites enhance coiled tubing capabilities

    SciTech Connect (OSTI)

    Sas-Jaworsky, A.; Williams, J.G.

    1994-04-01

    From early coiled tubing (CT) use to recent operations, most concerns have been about tube damage from past service and remaining safe working life. Composite CT (CCT) is designed and constructed to exhibit unique anisotropic characteristics relative to steel or alternative isotropic materials that expand burst, collapse, tensile and compressive load performance capabilities. In 1988, Conoco Inc. began a development effort focused on using high-performance composite materials to meet numerous challenges associated with current and future oil and gas exploration and development. At that time, Conoco initiated a project to explore composite materials use for high-pressure, long-length, non-corroding tubulars with primary application as onshore water injection lines. In 1989, Conoco awarded a contract to AMAT a/s in Sandefjord, Norway to develop spoolable composite pipe for small diameter subsea lines. Concurrent with ongoing spoolable composite subsea lines, Conoco also began to explore high-performance CCT development in 1989.

  9. Stable Isotope Enrichment Capabilities at ORNL

    SciTech Connect (OSTI)

    Egle, Brian; Aaron, W Scott; Hart, Kevin J

    2013-01-01

    The Oak Ridge National Laboratory (ORNL) and the US Department of Energy Nuclear Physics Program have built a high-resolution Electromagnetic Isotope Separator (EMIS) as a prototype for reestablishing a US based enrichment capability for stable isotopes. ORNL has over 60 years of experience providing enriched stable isotopes and related technical services to the international accelerator target community, as well as medical, research, industrial, national security, and other communities. ORNL is investigating the combined use of electromagnetic and gas centrifuge isotope separation technologies to provide research quantities (milligram to several kilograms) of enriched stable isotopes. In preparation for implementing a larger scale production facility, a 10 mA high-resolution EMIS prototype has been built and tested. Initial testing of the device has simultaneously collected greater than 98% enriched samples of all the molybdenum isotopes from natural abundance feedstock.

  10. Turbine vane with high temperature capable skins

    DOE Patents [OSTI]

    Morrison, Jay A.

    2012-07-10

    A turbine vane assembly includes an airfoil extending between an inner shroud and an outer shroud. The airfoil can include a substructure having an outer peripheral surface. At least a portion of the outer peripheral surface is covered by an external skin. The external skin can be made of a high temperature capable material, such as oxide dispersion strengthened alloys, intermetallic alloys, ceramic matrix composites or refractory alloys. The external skin can be formed, and the airfoil can be subsequently bi-cast around or onto the skin. The skin and the substructure can be attached by a plurality of attachment members extending between the skin and the substructure. The skin can be spaced from the outer peripheral surface of the substructure such that a cavity is formed therebetween. Coolant can be supplied to the cavity. Skins can also be applied to the gas path faces of the inner and outer shrouds.