Sample records for analysis work order

  1. 7.09 ERGONOMIC ANALYSIS IN ORDER TO DESIGN A WORK HELP TOOL : SIGOONS Corinne Chabaud & Sandrine Cazabat

    E-Print Network [OSTI]

    Winckler, Marco Antonio Alba

    7.09 ERGONOMIC ANALYSIS IN ORDER TO DESIGN A WORK HELP TOOL : SIGOONS Corinne Chabaud & Sandrine. INTRODUCTION This study issue is ergonomics part in design processes. We will describe how ergonomics tackle results and ambitions. 2. CONTEXT AND OBJECTIVES 2. 1 Context The present ergonomic study has been

  2. Work Permit # 51012MZ5 Work Order# '

    E-Print Network [OSTI]

    Homes, Christopher C.

    Confined Space· 0 Ergonomics· 0 Material Handling o ,Beryllium· 0 Electrical 0 Hydraulic o Safety Harness o Electrical Working Hot o Electrical Noise 0 Potential to Cause aFalse Alarm o QiCombustible Gas o IHSurvey Dosimeter o LockoutITagout o Spill potential o Self-reading Pencil Dosimeter o Impair Fire Protection

  3. Elmira Stove Works: Order (2011-CE-1407)

    Broader source: Energy.gov [DOE]

    DOE ordered Elmira Stove Works to pay a $6,000 civil penalty after finding Elmira Stove Works had failed to certify that certain models of refrigerator-freezers comply with the applicable energy conservation standard.

  4. Department-wide Quick Reaction Work Order System

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1981-03-12T23:59:59.000Z

    To describe the new Department Wide Quick Reaction Work Order System, to establish the criteria and procedures for its use, and to identify responsibilities for managing and operating the system.

  5. Current work in energy analysis

    SciTech Connect (OSTI)

    NONE

    1998-03-01T23:59:59.000Z

    This report describes the work performed at Berkeley Lab most recently. One of the Labs accomplishments is the publication of Scenarios of US Carbon Reductions, an analysis of the potential of energy technologies to reduce carbon emissions in the US. This analysis is described and played a key role in shaping the US position on climate change in the Kyoto Protocol negotiations. The Labs participation in the fundamental characterization of the climate change issue by the IPCC is described. Described also is a study of leaking electricity, which is stimulating an international campaign for a one-watt ceiling for standby electricity losses from appliances. This ceiling has the potential to save two-thirds of the 5% of US residential electricity currently expended on standby losses. The 54 vignettes contained in the report summarize results of research activities ranging in scale from calculating the efficacy of individual lamp ballasts to estimating the cost-effectiveness of the national Energy Star{reg_sign} labeling program, and ranging in location from a scoping study of energy-efficiency market transformation in California to development of an energy-efficiency project in the auto parts industry in Shandong Province, China.

  6. Policy Flash 2014-30 DOE Order 412.1a, Work Authorization System...

    Broader source: Energy.gov (indexed) [DOE]

    0 DOE Order 412.1a, Work Authorization System Administrative Change Policy Flash 2014-30 DOE Order 412.1a, Work Authorization System Administrative Change Questions concerning this...

  7. Hydrgoen Storage Systems Analysis Working Group Meeting Summary...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Analysis Working Group Meeting Summary Report Summary report from the May 17, 2007 Hydrogen Storage Systems Analysis Working Group Meeting ssawgmaysummary.pdf More...

  8. Seismic Attribute Analysis Using Higher Order Statistics

    E-Print Network [OSTI]

    Greenidge, Janelle Candice

    2009-05-15T23:59:59.000Z

    Seismic data processing depends on mathematical and statistical tools such as convolution, crosscorrelation and stack that employ second-order statistics (SOS). Seismic signals are non-Gaussian and therefore contain information beyond SOS. One...

  9. PRESENTATION OF WORK PERFORMED BY ESReDA "ACCIDENT ANALYSIS" WORKING

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    PRESENTATION OF WORK PERFORMED BY ESReDA "ACCIDENT ANALYSIS" WORKING GROUP AND GOALS FOR THE FUTURE J.P. PINEAU, INERIS, FRANCE Summary The Accident Analysis working group was initiated in January and softwares for consequences assessment of major accidents and a more statistical approach of data collected

  10. Hydrogen Storage Systems Analysis Working Group Meeting: Summary...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Summary of June 11, 2008, biannual meeting of the Hydrogen Storage Systems Analysis Working Group. ssawgsummaryreport0608.pdf More Documents & Publications Hydrgoen Storage...

  11. Analysis of large reflector antennas using CSP fringe formulation and higher-order diffraction

    E-Print Network [OSTI]

    Nehorai, Arye

    Analysis of large reflector antennas using CSP fringe formulation and higher-order diffraction- tric conductor (PEC) objects when illuminated by a Complex Source Points (CSP) beam expansion (S of a CSP-expansion illumination. In this work we discuss an application of the CSP fringe formulation

  12. Hydrogen Storage Systems Analysis Working Group Meeting Argonne DC Offices

    E-Print Network [OSTI]

    Hydrogen Storage Systems Analysis Working Group Meeting Argonne DC Offices L'Enfant Plaza, Washington, DC December 4, 2007 SUMMARY REPORT Compiled by Romesh Kumar Argonne National Laboratory Working Group Meeting December 4, 2007 Argonne DC Offices, L'Enfant Plaza, Washington, DC Meeting

  13. ORDER

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the ContributionsArms Control R&DNuclear fuelOPTICS FOR A PHOTOINJECTEDthe YearORDER

  14. Performance Analysis: Work Control Events Identified January - August 2010

    SciTech Connect (OSTI)

    De Grange, C E; Freeman, J W; Kerr, C E; Holman, G; Marsh, K; Beach, R

    2011-01-14T23:59:59.000Z

    This performance analysis evaluated 24 events that occurred at LLNL from January through August 2010. The analysis identified areas of potential work control process and/or implementation weaknesses and several common underlying causes. Human performance improvement and safety culture factors were part of the causal analysis of each event and were analyzed. The collective significance of all events in 2010, as measured by the occurrence reporting significance category and by the proportion of events that have been reported to the DOE ORPS under the ''management concerns'' reporting criteria, does not appear to have increased in 2010. The frequency of reporting in each of the significance categories has not changed in 2010 compared to the previous four years. There is no change indicating a trend in the significance category and there has been no increase in the proportion of occurrences reported in the higher significance category. Also, the frequency of events, 42 events reported through August 2010, is not greater than in previous years and is below the average of 63 occurrences per year at LLNL since 2006. Over the previous four years, an average of 43% of the LLNL's reported occurrences have been reported as either ''management concerns'' or ''near misses.'' In 2010, 29% of the occurrences have been reported as ''management concerns'' or ''near misses.'' This rate indicates that LLNL is now reporting fewer ''management concern'' and ''near miss'' occurrences compared to the previous four years. From 2008 to the present, LLNL senior management has undertaken a series of initiatives to strengthen the work planning and control system with the primary objective to improve worker safety. In 2008, the LLNL Deputy Director established the Work Control Integrated Project Team to develop the core requirements and graded elements of an institutional work planning and control system. By the end of that year this system was documented and implementation had begun. In 2009, training of the workforce began and as of the time of this report more than 50% of authorized Integration Work Sheets (IWS) use the activity-based planning process. In 2010, LSO independently reviewed the work planning and control process and confirmed to the Laboratory that the Integrated Safety Management (ISM) System was implemented. LLNL conducted a cross-directorate management self-assessment of work planning and control and is developing actions to respond to the issues identified. Ongoing efforts to strengthen the work planning and control process and to improve the quality of LLNL work packages are in progress: completion of remaining actions in response to the 2009 DOE Office of Health, Safety, and Security (HSS) evaluation of LLNL's ISM System; scheduling more than 14 work planning and control self-assessments in FY11; continuing to align subcontractor work control with the Institutional work planning and control system; and continuing to maintain the electronic IWS application. The 24 events included in this analysis were caused by errors in the first four of the five ISMS functions. The most frequent cause was errors in analyzing the hazards (Function 2). The second most frequent cause was errors occurring when defining the work (Function 1), followed by errors during the performance of work (Function 4). Interestingly, very few errors in developing controls (Function 3) resulted in events. This leads one to conclude that if improvements are made to defining the scope of work and analyzing the potential hazards, LLNL may reduce the frequency or severity of events. Analysis of the 24 events resulted in the identification of ten common causes. Some events had multiple causes, resulting in the mention of 39 causes being identified for the 24 events. The most frequent cause was workers, supervisors, or experts believing they understood the work and the hazards but their understanding was incomplete. The second most frequent cause was unclear, incomplete or confusing documents directing the work. Together, these two causes were mentioned 17 times and co

  15. PROCESS ANALYSIS WORK FOR THE DOE HYDROGEN PROGRAM -2001

    E-Print Network [OSTI]

    . Mann National Renewable Energy Laboratory Golden, CO 80401 Abstract In 2001, process analysis work conducted at the National Renewable Energy Laboratory for the Department of Energy's Hydrogen Program, and 3) assessment of the mass production of carbon nanotubes. The first study covers a project

  16. RATE ANALYSIS OF INEXACT DUAL FIRST ORDER METHODS ...

    E-Print Network [OSTI]

    2013-02-12T23:59:59.000Z

    Finally, in Section 5 we provide extensive simulations in order to certify the ...... of iterations obtained with Rd = ?? , where ?? is computed exactly using Matlab's ..... tive control: A tutorial review and future research directions, Computers and Chemical ... control based on agent negotiation, Journal of Process Control, vol.

  17. RETROSPECTIVE: Higher-order control-flow analysis in retrospect

    E-Print Network [OSTI]

    Shivers, Olin

    that the SSA revolution in the traditional com- piler community was essentially CPS in another guise [10 there are interesting program analyses and optimisations that require this kind of extra power. CPS as an intermediate representation based on continuation-passing style (CPS). This continued a line of work originating with Steele

  18. Technical Work Plan For: Meteorological Monitoring Data Analysis

    SciTech Connect (OSTI)

    R. Green

    2006-02-06T23:59:59.000Z

    The meteorological monitoring and analysis program has five objectives. (1) Acquire qualified meteorological data from YMP meteorological monitoring network using appropriate controls on measuring and test equipment. Because this activity is monitoring (i.e., recording naturally occurring events) pre-test predictions are not applicable. All work will be completed in accordance with U.S. Department of Energy (DOE) Office of Repository Development (ORD) administrative procedures and Bechtel SAIC Co., LLC (BSC) line procedures. The meteorological monitoring program includes measuring and test equipment calibrations, operational checks, preventive and corrective maintenance, and data collection. (2) Process the raw monitoring data collected in the field and submit technically reviewed, traceable data to the Technical Data Management System (TDMS) and the Records Processing Center. (3) Develop analyses or calculations to provide information to data requesters and provide data sets as requested. (4) Provide precipitation amounts to Site Operations to support requirements to perform inspections in the Stormwater Pollution Prevention Plan (implemented in LP-OM-050Q-BSC) following storm events of greater than 0.5 inches. The program also provides meteorological data during extreme weather conditions (e.g., high winds, rainstorms, etc.) to support decisions regarding worker safety. (5) Collect samples of precipitation for chemical and isotopic analysis by the United States Geological Survey (USGS). The BSC ES&H Environmental Compliance organization is responsible for performing this work. Data from calendar-year periods are submitted to the TDMS to provide YMP users with qualified meteorological data for scientific modeling and analyses, engineering designs of surface facilities, performance assessment analyses, and operational safety issues.

  19. Second order analysis of state-constrained control-affine problems

    E-Print Network [OSTI]

    M. Soledad Aronna

    2014-11-07T23:59:59.000Z

    Nov 7, 2014 ... Second order analysis of state-constrained control-affine problems. M. Soledad Aronna(aronna ***at*** impa.br) J. Frederic Bonnans(Frederic.

  20. Microscopic analysis of order parameters in nuclear quantum phase transitions

    SciTech Connect (OSTI)

    Li, Z. P. [State Key Laboratory of Nuclear Physics and Technology, School of Physics, Peking University, Beijing 100871 (China); Physics Department, Faculty of Science, University of Zagreb, HR-10000 Zagreb (Croatia); Niksic, T. [Physics Department, Faculty of Science, University of Zagreb, HR-10000 Zagreb (Croatia); Vretenar, D. [Physics Department, Faculty of Science, University of Zagreb, HR-10000 Zagreb (Croatia); Kavli Institute for Theoretical Physics China, CAS, Beijing 100190 (China); Meng, J. [State Key Laboratory of Nuclear Physics and Technology, School of Physics, Peking University, Beijing 100871 (China); Kavli Institute for Theoretical Physics China, CAS, Beijing 100190 (China); School of Physics and Nuclear Energy Engineering, Beihang University, Beijing 100191 (China)

    2009-12-15T23:59:59.000Z

    Microscopic signatures of nuclear ground-state shape phase transitions in Nd isotopes are studied using excitation spectra and collective wave functions obtained by diagonalization of a five-dimensional Hamiltonian for quadrupole vibrational and rotational degrees of freedom, with parameters determined by constrained self-consistent relativistic mean-field calculations for triaxial shapes. As a function of the physical control parameter, the number of nucleons, energy gaps between the ground state and the excited vibrational states with zero angular momentum, isomer shifts, and monopole transition strengths exhibit sharp discontinuities at neutron number N=90, which is characteristic of a first-order quantum phase transition.

  1. Higher-order web link analysis using multilinear algebra.

    SciTech Connect (OSTI)

    Kenny, Joseph P.; Bader, Brett William (Sandia National Laboratories, Albuquerque, NM); Kolda, Tamara Gibson

    2005-07-01T23:59:59.000Z

    Linear algebra is a powerful and proven tool in web search. Techniques, such as the PageRank algorithm of Brin and Page and the HITS algorithm of Kleinberg, score web pages based on the principal eigenvector (or singular vector) of a particular non-negative matrix that captures the hyperlink structure of the web graph. We propose and test a new methodology that uses multilinear algebra to elicit more information from a higher-order representation of the hyperlink graph. We start by labeling the edges in our graph with the anchor text of the hyperlinks so that the associated linear algebra representation is a sparse, three-way tensor. The first two dimensions of the tensor represent the web pages while the third dimension adds the anchor text. We then use the rank-1 factors of a multilinear PARAFAC tensor decomposition, which are akin to singular vectors of the SVD, to automatically identify topics in the collection along with the associated authoritative web pages.

  2. Higher Order Mode Heating Analysis for the ILC Superconducting Linacs

    SciTech Connect (OSTI)

    Bane, K.L.F.; Nantista, C.; Adolphsen, C.; /SLAC; ,

    2010-10-27T23:59:59.000Z

    The superconducting cavities and interconnects in the 11 km long linacs of the International Linear Collider (ILC) are designed to operate at 2K, where cooling costs are very expensive. It is thus important to minimize cryogenic heat loads. In addition to an unavoidable static load and the dynamic load of the fundamental 1.3 GHz accelerating rf, a further heat source is presented by the higher order mode (HOM) power deposited by the beam. Such modes will be damped by specially designed HOM couplers attached to the cavities (for trapped modes), and by ceramic dampers at 70K that are located between the eight or nine cavity cryomodules (for propagating modes). Brute force calculation of the higher frequency modes excited in a string of cryomodules is limited by computing capacity (see, e.g. [1]). M. Liepe has calculated {approx} 400 longitudinal TM modes in 3 superconducting cavities plus absorbers, up to 8 GHz [2]. Joestingmeier, et al., have used a ray tracing calculation to find the effect at higher frequencies, specifically in the range of tens of GHz and above [3]. In this report we present a scattering matrix approach, which we apply to an rf unit comprising 26 cavities and 3 absorbers. We perform calculations at sample frequencies (up to 20 GHz) to predict the effectiveness of the ceramic dampers in limiting HOM heat deposition at 2K.

  3. Higher-Order Mass Defect Analysis for Mass Spectra of Complex Organic Mixtures

    SciTech Connect (OSTI)

    Roach, Patrick J.; Laskin, Julia; Laskin, Alexander

    2011-06-15T23:59:59.000Z

    Higher-order mass defect analysis is introduced as a unique formula assignment and visualization method for the analysis of complex mass spectra. This approach is an extension of the concepts of Kendrick mass transformation widely used for identification of homologous compounds differing only by a number of base units (e.g., CH2, H2, O, CH2O, etc.) in complex mixtures. We present an iterative renormalization routine for defining higher order homologous series and multidimensional clustering of mass spectral features. This approach greatly simplifies visualization of complex mass spectra and increases the number of chemical formulae that can be confidently assigned for given mass accuracy. The potential for using higher-order mass defects for data reduction and visualization is shown. Higher-order mass defect analysis is described and demonstrated through third-order analysis of a de-isotoped high-resolution mass spectrum of crude oil containing nearly 13,000 peaks.

  4. Hydrogen Storage Systems Analysis Working Group Meeting: Summary...

    Broader source: Energy.gov (indexed) [DOE]

    projects and work being presented. Romesh Kumar (ANL) presented the agenda, led the self- identification of those present in the room and the participants who were calling in, and...

  5. Hydrogen Storage Systems Analysis Working Group Meeting: Summary...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    meetings is to bring together the DOE research community involved in systems analysis of hydrogen storage materials and processes. ssawgsummaryreport.pdf More Documents &...

  6. Higher-Order Mass Defect Analysis for Mass Spectra of Complex...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    high-resolution mass spectrum of crude oil containing nearly 13,000 peaks. Citation: Roach PJ, J Laskin, and A Laskin.2011."Higher-Order Mass Defect Analysis for Mass Spectra of...

  7. Hazard Categorization and Accident Analysis Techniques for Compliance with DOE Order 5480.23, Nuclear Safety Analysis Reports

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1997-12-12T23:59:59.000Z

    he purpose of this DOE Standard is to establish guidance for the preparation and review of hazard categorization and accident analyses techniques as required in DOE Order 5480.23, Nuclear Safety Analysis Reports.

  8. analysis working note: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    two telescope systems. Lloyd, Seth 2015-01-01 40 Notes 07. Thermal analysis of finite length journal bearings including fluid inertia Texas A&M University - TxSpace Summary: 1...

  9. E-Print Network 3.0 - analysis working group Sample Search Results

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and Student-Selected Groups: A View from Inside Summary: approach. Deep approaches to work allocation were based on an initial group analysis of the project... ABSTRACT: This...

  10. One Work Analysis, Two Domains: A Display Information Requirements Case Study

    E-Print Network [OSTI]

    Cummings, M. L.

    2012-01-01T23:59:59.000Z

    d observations, among other techniques. Given the time and resources required, we examine how to generalize a work domain analysis technique, namely the hybrid Cognitive Task Analysis (hCTA) method across two domains in ...

  11. RISMC ADVANCED SAFETY ANALYSIS WORKING PLAN FY 2015 FY 2019

    SciTech Connect (OSTI)

    Szilard, Ronaldo H; Smith, Curtis L

    2014-09-01T23:59:59.000Z

    SUMMARY In this report, the Advanced Safety Analysis Program (ASAP) objectives and value proposition is described. ASAP focuses on modernization of nuclear power safety analysis (tools, methods and data); implementing state-of-the-art modeling techniques (which include, for example, enabling incorporation of more detailed physics as they become available); taking advantage of modern computing hardware; and combining probabilistic and mechanistic analyses to enable a risk informed safety analysis process. The modernized tools will maintain the current high level of safety in our nuclear power plant fleet, while providing an improved understanding of safety margins and the critical parameters that affect them. Thus, the set of tools will provide information to inform decisions on plant modifications, refurbishments, and surveillance programs, while improving economics. The set of tools will also benefit the design of new reactors, enhancing safety per unit cost of a nuclear plant. As part of the discussion, we have identified three sets of stakeholders, the nuclear industry, the Department of Energy (DOE), and associated oversight organizations. These three groups would benefit from ASAP in different ways. For example, within the DOE complex, the possible applications that are seen include the safety of experimental reactors, facility life extension, safety-by-design in future generation advanced reactors, and managing security for the storage of nuclear material. This report provides information in five areas: 1. A value proposition (why is this important?) that will make the case for stakeholders use of the ASAP research and development (R&D) products. 2. An identification of likely end users and pathway to adoption of enhanced tools by the end-users. 3. A proposed set of practical and achievable use case demonstrations. 4. A proposed plan to address ASAP verification and validation (V&V) needs. 5. A proposed schedule for the multi-year ASAP.

  12. Analysis of Integrated Safety Management at the Activity Level: Work

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of EnergyEnergy Cooperation |South42.2 (April 2012) 1 DocumentationAnalysis of Crossover Points forNEPA

  13. Model Order Reductions for Stability Analysis of Islanded Microgrids with Droop Control

    E-Print Network [OSTI]

    Vasquez, Juan Carlos

    1 Model Order Reductions for Stability Analysis of Islanded Microgrids with Droop Control V, IEEE Abstract--Three-phase inverters subject to droop control are widely used in islanded microgrids. In this paper, a mathematical model for islanded microgrids with linear loads and inverters under frequency

  14. The Analysis of Large Order Bessel Functions in Gravitational Wave Signals from Pulsars

    E-Print Network [OSTI]

    F. A. Chishtie; S. R. Valluri; K. M. Rao; D. Sikorski; T. Williams

    2005-03-15T23:59:59.000Z

    In this work, we present the analytic treatment of the large order Bessel functions that arise in the Fourier Transform (FT) of the Gravitational Wave (GW) signal from a pulsar. We outline several strategies which employ asymptotic expansions in evaluation of such Bessel functions which also happen to have large argument. Large order Bessel functions also arise in the Peters-Mathews model of binary inspiralling stars emitting GW and several problems in potential scattering theory. Other applications also arise in a variety of problems in Applied Mathematics as well as in the Natural Sciences and present a challenge for High Performance Computing(HPC).

  15. Current Work in Energy Analysis (Energy Analysis Program -1996 Annual Report)

    SciTech Connect (OSTI)

    Energy Analysis Program

    1998-03-01T23:59:59.000Z

    This report describes the work that Environmental Energy Technologies Division of Lawrence Berkeley National Laboratory has been doing most recently. One of our proudest accomplishments is the publication of Scenarios of U.S. Carbon Reductions, an analysis of the potential of energy technologies to reduce carbon emissions in the U.S. This analysis played a key role in shaping the U.S. position on climate change in the Kyoto Protocol negotiations. Our participation in the fundamental characterization of the climate change issue by the IPCC is described. We are also especially proud of our study of ''leaking electricity,'' which is stimulating an international campaign for a one-watt ceiling for standby electricity losses from appliances. This ceiling has the potential to save two-thirds of the 5% of U.S. residential electricity currently expended on standby losses. The 54 vignettes contained in the following pages summarize results of research. activities ranging in scale from calculating the efficacy of individual lamp ballasts to estimating the cost-effectiveness of the national ENERGY STAR{reg_sign} labeling program, and ranging in location from a scoping study of energy-efficiency market transformation in California to development of an energy-efficiency project in the auto parts industry in Shandong Province, China. These are the intellectual endeavors of a talented team of researchers dedicated to public service.

  16. Higher-Order, Space-Time Adaptive Finite Volume Methods: Algorithms, Analysis and Applications

    SciTech Connect (OSTI)

    Minion, Michael

    2014-04-29T23:59:59.000Z

    The four main goals outlined in the proposal for this project were: 1. Investigate the use of higher-order (in space and time) finite-volume methods for fluid flow problems. 2. Explore the embedding of iterative temporal methods within traditional block-structured AMR algorithms. 3. Develop parallel in time methods for ODEs and PDEs. 4. Work collaboratively with the Center for Computational Sciences and Engineering (CCSE) at Lawrence Berkeley National Lab towards incorporating new algorithms within existing DOE application codes.

  17. Hydrogen Storage Systems Analysis Working Group Meeting Argonne National Laboratory DC Offices

    E-Print Network [OSTI]

    Hydrogen Storage Systems Analysis Working Group Meeting Argonne National Laboratory DC Offices 955 by Romesh Kumar Argonne National Laboratory and Laura Verduzco Sentech, Inc. February 28, 2007 #12;SUMMARY

  18. Defining groundwater remediation objectives with cost-1 benefit analysis: does it work?2

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    /or decontamination are related to direct50 groundwater use. Benefits are often considered as avoided costs1 Defining groundwater remediation objectives with cost-1 benefit analysis: does it work?2 3 J.7 *Corresponding author (E-mail: jd.rinaudo@brgm.fr)8 9 Abstract10 The use of cost-benefit analysis

  19. Reduced order models for thermal analysis : final report : LDRD Project No. 137807.

    SciTech Connect (OSTI)

    Hogan, Roy E., Jr.; Gartling, David K.

    2010-09-01T23:59:59.000Z

    This LDRD Senior's Council Project is focused on the development, implementation and evaluation of Reduced Order Models (ROM) for application in the thermal analysis of complex engineering problems. Two basic approaches to developing a ROM for combined thermal conduction and enclosure radiation problems are considered. As a prerequisite to a ROM a fully coupled solution method for conduction/radiation models is required; a parallel implementation is explored for this class of problems. High-fidelity models of large, complex systems are now used routinely to verify design and performance. However, there are applications where the high-fidelity model is too large to be used repetitively in a design mode. One such application is the design of a control system that oversees the functioning of the complex, high-fidelity model. Examples include control systems for manufacturing processes such as brazing and annealing furnaces as well as control systems for the thermal management of optical systems. A reduced order model (ROM) seeks to reduce the number of degrees of freedom needed to represent the overall behavior of the large system without a significant loss in accuracy. The reduction in the number of degrees of freedom of the ROM leads to immediate increases in computational efficiency and allows many design parameters and perturbations to be quickly and effectively evaluated. Reduced order models are routinely used in solid mechanics where techniques such as modal analysis have reached a high state of refinement. Similar techniques have recently been applied in standard thermal conduction problems e.g. though the general use of ROM for heat transfer is not yet widespread. One major difficulty with the development of ROM for general thermal analysis is the need to include the very nonlinear effects of enclosure radiation in many applications. Many ROM methods have considered only linear or mildly nonlinear problems. In the present study a reduced order model is considered for application to the combined problem of thermal conduction and enclosure radiation. The main objective is to develop a procedure that can be implemented in an existing thermal analysis code. The main analysis objective is to allow thermal controller software to be used in the design of a control system for a large optical system that resides with a complex radiation dominated enclosure. In the remainder of this section a brief outline of ROM methods is provided. The following chapter describes the fully coupled conduction/radiation method that is required prior to considering a ROM approach. Considerable effort was expended to implement and test the combined solution method; the ROM project ended shortly after the completion of this milestone and thus the ROM results are incomplete. The report concludes with some observations and recommendations.

  20. Symmetry analysis of a class of autonomous even-order ordinary differential equations

    E-Print Network [OSTI]

    Priscila Leal da Silva; Igor Leite Freire

    2014-03-07T23:59:59.000Z

    A class of autonomous, even-order ordinary differential equations is discussed from the point of view of Lie symmetries. It is shown that for a certain power nonlinearity, the Noether symmetry group coincides with the Lie point symmetry group. First integrals are established and exact solutions are found. Furthermore, this paper complements, for the one-dimensional case, some results in the literature of Lie group analysis of poliharmonic equations and Noether symmetries obtained in the last twenty years. In particular, it is shown that the exceptional negative power discovered in [A. H. Bokhari, F. M. Mahomed and F. D. Zaman, Symmetries and integrability of a fourth-order Euler-Bernoulli beam equation, J. Math. Phys., vol. 51, 053517, (2010)] is a member of an one-parameter family of exceptional powers in which the Lie symmetry group coincides with the Noether symmetry group.

  1. Applying observations of work activity in designing prototype data analysis tools

    SciTech Connect (OSTI)

    Springmeyer, R.R.

    1993-07-06T23:59:59.000Z

    Designers, implementers, and marketers of data analysis tools typically have different perspectives than users. Consequently, data analysis often find themselves using tools focused on graphics and programming concepts rather than concepts which reflect their own domain and the context of their work. Some user studies focus on usability tests late in development; others observe work activity, but fail to show how to apply that knowledge in design. This paper describes a methodology for applying observations of data analysis work activity in prototype tool design. The approach can be used both in designing improved data analysis tools, and customizing visualization environments to specific applications. We present an example of user-centered design for a prototype tool to cull large data sets. We revisit the typical graphical approach of animating a large data set from the point of view of an analysis who is culling data. Field evaluations using the prototype tool not only revealed valuable usability information, but initiated in-depth discussions about user`s work, tools, technology, and requirements.

  2. Hydrogen Storage Systems Analysis Working Group Meeting 2007 Hydrogen Program Annual Review

    E-Print Network [OSTI]

    Hydrogen Storage Systems Analysis Working Group Meeting 2007 Hydrogen Program Annual Review Crystal Laboratory and Elvin Yuzugullu Sentech, Inc. June 28, 2007 #12;SUMMARY REPORT Hydrogen Storage of hydrogen storage materials and processes for information exchange and to update the researchers on related

  3. Adaptive SSL: Design, Implementation and Overhead Analysis submission for Work-in-Progress/Application Paper track.

    E-Print Network [OSTI]

    Newcastle upon Tyne, University of

    Adaptive SSL: Design, Implementation and Overhead Analysis submission for Work an adaptation controller for SSL (Secure Socket Layer), called Adaptive SSL. 1 Introduction Applications adaptation of the Secure Socket Layer (SSL) protocol [3]. Adaptive SSL (ASSL) aims to provide appropriate se

  4. APPENDIX B -GRAPHICS Most computer simulation work produces lots of numerical data. The analysis of

    E-Print Network [OSTI]

    Boal, David

    APPENDIX B - GRAPHICS Most computer simulation work produces lots of numerical data. The analysis. In this section, we describe some elements of computer graphics that are appropriate to the Apple PowerPCs of the Computational Physics Lab. Further editions of these notes will include Windows versions of the graphics. Our

  5. Guidance on Life-Cycle Cost Analysis Required by Executive Order...

    Energy Savers [EERE]

    Documents & Publications Energy Price Indices and Discount Factors for Life-Cycle Cost Analysis - 2010 Energy Price Indices and Discount Factors for Life-Cycle Cost Analysis -...

  6. Fuel-Coolant-Interaction modeling and analysis work for the High Flux Isotope Reactor Safety Analysis Report

    SciTech Connect (OSTI)

    Taleyarkhan, R.P.; Georgevich, V.; Nestor, C.W.; Chang, S.J.; Freels, J.; Gat, U.; Lepard, B.L.; Gwaltney, R.C.; Luttrell, C.; Kirkpatrick, J.

    1993-07-01T23:59:59.000Z

    A brief historical background and a description of short- and long-term task plan development for effective closure of this important safety issue for the HFIR are given. Short-term aspects deal with Fuel-Coolant-Interaction (FCI) issues experimentation, modeling, and analysis for the flow-blockage-induced steam explosion events in direct support of the SAR. Long-term aspects deal with addressing FCI issues resulting from other accidents in conjunction with issues dealing with aluminum ignition, which can result in an order of magnitude increase in overall energetics. Problem formulation, modeling, and computer code simulation for the various phases of steam explosions are described. The evaluation of core melt initiation propagation, and melt superheat are described. Core melt initiation and propagation have been studied using simple conservative models as well as from modeling and analysis using RELAP5. Core debris coolability, heatup, and melting/freezing aspects have been studied by use of the two-dimensional melting/freezing analysis code 2DKO, which was also benchmarked with MELCOR code predictions. Descriptions are provided for the HM, BH, FCIMOD, and CTH computer codes that have been implemented for studying steam explosion energetics from the standpoint of evaluating bounding loads by thermodynamic models or best-estimate loads from one- and two-dimensional simulations of steam explosion energetics. Vessel failure modeling and analysis was conducted using the principles of probabilistic fracture mechanics in conjunction with ADINA code calculations. Top head bolts failure modeling has also been conducted where the failure criterion was based upon stresses in the bolts exceeding the material yield stress for a given time duration. Missile transport modeling and analysis was conducted by setting up a one-dimensional mathematical model that accounts for viscous dissipation, virtual mass effects, and material inertia.

  7. Analysis of the second order exchange self energy of a dense electron gas

    E-Print Network [OSTI]

    M. L. Glasser; George Lamb

    2006-11-02T23:59:59.000Z

    We investigate the evaluation of the six-fold integral representation for the second order exchange contribution to the self energy of a three dimensional electron gas at the Fermi surface.

  8. Global Clock, Physical Time Order and Pending Period Analysis in Multiprocessor Systems

    E-Print Network [OSTI]

    Chen, Yunji; Hu, Weiwu

    2009-01-01T23:59:59.000Z

    In multiprocessor systems, various problems are treated with Lamport's logical clock and the resultant logical time orders between operations. However, one often needs to face the high complexities caused by the lack of logical time order information in practice. In this paper, we utilize the \\emph{global clock} to infuse the so-called \\emph{pending period} to each operation in a multiprocessor system, where the pending period is a time interval that contains the performed time of the operation. Further, we define the \\emph{physical time order} for any two operations with disjoint pending periods. The physical time order is obeyed by any real execution in multiprocessor systems due to that it is part of the truly happened operation orders restricted by global clock, and it is then proven to be independent and consistent with traditional logical time orders. The above novel yet fundamental concepts enables new effective approaches for analyzing multiprocessor systems, which are named \\emph{pending period analy...

  9. Full-wave algorithms for model order reduction and electromagnet analysis of impedance and scattering

    E-Print Network [OSTI]

    Klemas, Thomas J. (Thomas Jonas)

    2005-01-01T23:59:59.000Z

    As technology advances and sophisticated electronic systems achieve ubiquity, the demand for thorough, efficient Electromagnetic (EM) analysis continues to rise. The prohibitive costs of constructing and maintaining ...

  10. Emergency Work Y N LBNL Subcontractor Pre-Task Hazard Analysis Company Name: Project Name: Location: Date: .

    E-Print Network [OSTI]

    Eisen, Michael

    Emergency Work Y N LBNL Subcontractor Pre-Task Hazard Analysis Company Name: Project Name: Location: Company Name: Date: LBNL P/M: LBNL LBNL CSE: LBNL Pg 1 of 2 -Over- 12/12 #12;PTHA Guide Hazards Controls

  11. Theoretical analysis of high-order harmonic generation from a coherent superposition of states

    SciTech Connect (OSTI)

    Milosevic, Dejan B. [Faculty of Science, University of Sarajevo, Zmaja od Bosne 35, 71000 Sarajevo (Bosnia and Herzegowina); Max-Born-Institut, Max-Born-Strasse 2a, Berlin, 12489 (Germany)

    2006-02-15T23:59:59.000Z

    A quantum theory of high-order harmonic generation by a strong laser field in the presence of more bound states is formulated. The obtained numerical and analytical results for a two-state hydrogenlike atom model show that the harmonic spectrum consists of two parts: a usual single-state harmonic spectrum of odd harmonics having the energies (2k+1){omega} and a resonant part with the peaks around the excitation energy {delta}{omega}. The energy of the harmonics in the resonant part of the spectrum is equal to {delta}{omega}{+-}{omega}, {delta}{omega}{+-}3{omega}, .... For energies higher than the excitation energy, the resonant part forms a plateau, followed by a cutoff. The emission rate of the harmonics in this resonant plateau is many orders of magnitude higher than that of the harmonics generated in the presence of the ground state alone. The influence of the depletion of the initial states, as well as of the pulse shape and intensity, is analyzed.

  12. One Work Analysis, Two Domains: A Display Information Requirements Case Study

    E-Print Network [OSTI]

    Cummings, M. L.

    Work domain analyses can be time consuming, requiring extensive interviews, documentation review, and observations, among other techniques. Given the time and resources required, we examine how to generalize a work domain ...

  13. Second order classical perturbation theory for atom surface scattering: Analysis of asymmetry in the angular distribution

    SciTech Connect (OSTI)

    Zhou, Yun, E-mail: zhou.yun.x@gmail.com; Pollak, Eli, E-mail: eli.pollak@weizmann.ac.il [Chemical Physics Department, Weizmann Institute of Science, 76100 Rehovot (Israel)] [Chemical Physics Department, Weizmann Institute of Science, 76100 Rehovot (Israel); Miret-Arts, Salvador, E-mail: s.miret@iff.csic.es [Instituto de Fisica Fundamental, Consejo Superior de Investigaciones Cientificas, Serrano 123, 28006 Madrid (Spain)] [Instituto de Fisica Fundamental, Consejo Superior de Investigaciones Cientificas, Serrano 123, 28006 Madrid (Spain)

    2014-01-14T23:59:59.000Z

    A second order classical perturbation theory is developed and applied to elastic atom corrugated surface scattering. The resulting theory accounts for experimentally observed asymmetry in the final angular distributions. These include qualitative features, such as reduction of the asymmetry in the intensity of the rainbow peaks with increased incidence energy as well as the asymmetry in the location of the rainbow peaks with respect to the specular scattering angle. The theory is especially applicable to soft corrugated potentials. Expressions for the angular distribution are derived for the exponential repulsive and Morse potential models. The theory is implemented numerically to a simplified model of the scattering of an Ar atom from a LiF(100) surface.

  14. Comparative Analysis Between US NRC Requirements and US DOE Orders - 13402

    SciTech Connect (OSTI)

    Chakraborti, Sayan [MRIGlobal, 425 Volker Blvd, Kansas City, MO 64110 (United States)] [MRIGlobal, 425 Volker Blvd, Kansas City, MO 64110 (United States); Stone, Lynn; Hyatt, Jeannette [Savannah River Nuclear Solutions (United States)] [Savannah River Nuclear Solutions (United States)

    2013-07-01T23:59:59.000Z

    Small modular reactor (SMR) is a nuclear reactor design approach that is expected to herald in a new era of clean energy in the U.S. These reactors are less than one-third the size of conventional large nuclear power reactors, and have factory-fabricated components that may be transported by rail or truck to a site selected to house a small nuclear reactor. To facilitate the licensing of these smaller nuclear reactor designs, the Nuclear Regulatory Commission (NRC) is in the process of developing a regulatory infrastructure to support licensing review of these unique reactor designs. As part of these activities, the NRC has been meeting with the Department of Energy (DOE) and with individual SMR designers to discuss potential policy, licensing, and key technical differences in SMR designs. It is anticipated by the NRC that such licensing interaction and guidance early in the design process will contribute towards minimizing complexity while adding stability and predictability in the licensing and subsequent regulation of new reactor designs such as SMRs. In conjunction with the current NRC initiative of developing the SMR licensing process, early communication and collaboration in the identification and resolution of any potential technical and licensing differences between NRC requirements and similar requirements applicable at DOE sites would help to expedite demonstration and implementation of SMR technology in the US. In order to foster such early communication, Savannah River Nuclear Solutions (SRNS) has begun taking the first steps in identifying and evaluating potential licensing gaps that may exist between NRC and DOE requirements in siting SMRs at DOE sites. A comparison between the existing NRC regulations for Early Site Permits and the DOE Orders was undertaken to establish the degree of correlation between NRC requirements and compliance methods in place at DOE sites. The ability to use existing data and information to expedite the development of the Environmental Report is being evaluated at the Savannah River Site as a case study for application across the DOE Complex. This paper will present areas of direct correlation as well as those where the need for site specific data for either DOE operations or NRC compliance warrant additional interaction between the agencies. Areas where further refinement of the SMR technologies may drive collaborative development of revised regulations through such means as industry consensus standards will also be highlighted. Both NRC and DOE have requirements that mandate public involvement in their processes. The importance and value of early engagement with the public as well as collaborating regulatory agencies is of critical importance when deploying new technologies. (authors)

  15. Gain analysis of higher-order-mode amplification in a dielectric-implanted multi-beam traveling wave structure

    SciTech Connect (OSTI)

    Gee, Anthony [Department of Physics, Northern Illinois University, Dekalb, Illinois 60115 (United States)] [Department of Physics, Northern Illinois University, Dekalb, Illinois 60115 (United States); Shin, Young-Min [Department of Physics, Northern Illinois University, Dekalb, Illinois 60115 (United States) [Department of Physics, Northern Illinois University, Dekalb, Illinois 60115 (United States); Accelerator Physics Center (APC), Fermi National Accelerator Laboratory (FNAL), Batavia, Illinois 60510 (United States)

    2013-07-15T23:59:59.000Z

    A multi-beam traveling wave amplifier designed with an overmoded staggered double grating array was examined by small signal analysis combined with simulation. Eigenmode and S-parameter analyses show that the 2 cm long slow wave structure (SWS) has 15 dB insertion loss over the passband (TM{sub 31} mode) with ?28% cold bandwidth. Analytic gain calculation indicates that in the SWS, TM{sub 31}-mode is amplified with 1520 dB/beam at 6484 GHz with three elliptical beams of 10 kV and 150 mA/beam, which was compared with particle-in-cell (PIC) simulations. PIC analysis on the analysis of instability with zero-input driving excitations demonstrated that background noises and non-operating lower order modes are noticeably suppressed by implanting equidistant dielectric absorbers; the overmoded structure only allowed the desired 3rd order mode to propagate in the structure. The designed circuit structure can be widely applied to multi-beam devices for high power RF generation.

  16. IEEE TRANSACTIONS ON WIRELESS COMMUNICATIONS, VOL. 7, NO. 10, OCTOBER 2008 1 On Outage and Error Rate Analysis of the Ordered V-BLAST

    E-Print Network [OSTI]

    Loyka, Sergey

    is a manifestation of the space-time autocoding effect in the V-BLAST. While the sub-optimal ordering (based evaluated. Index Terms-- Multi-antenna (MIMO) system, V-BLAST, per- formance analysis, autocoding effect I Rate Analysis of the Ordered V-BLAST Sergey Loyka, Senior Member, IEEE, and Francois Gagnon, Senior

  17. Performance analysis of a series of hermetic reciprocating compressors working with R290 (propane) and R407C

    E-Print Network [OSTI]

    Fernández de Córdoba, Pedro

    Performance analysis of a series of hermetic reciprocating compressors working with R290 (propane with propane as refrigerant are analyzed in terms of the compressor model developed by [E. Navarro, E. Granryd. In addition, a comparison study between propane and R407C was carried out for one compressor and the observed

  18. Carbon Emissions Analysis of Rail Resurfacing Work: A Case Study, Practical Guideline, and Systems Thinking Approach

    E-Print Network [OSTI]

    Krezo, S.

    Carbon pollution has become a sensitive topic across the globe in recent times. In Australia, incentive has been provided to industry in order to reduce carbon emissions in heavy polluting industries. The railway transportation ...

  19. Work Domain Analysis of a Predecessor Sodium-cooled Reactor as Baseline for AdvSMR Operational Concepts

    SciTech Connect (OSTI)

    Ronald Farris; David Gertman; Jacques Hugo

    2014-03-01T23:59:59.000Z

    This report presents the results of the Work Domain Analysis for the Experimental Breeder Reactor (EBR-II). This is part of the phase of the research designed to incorporate Cognitive Work Analysis in the development of a framework for the formalization of an Operational Concept (OpsCon) for Advanced Small Modular Reactors (AdvSMRs). For a new AdvSMR design, information obtained through Cognitive Work Analysis, combined with human performance criteria, can and should be used in during the operational phase of a plant to assess the crew performance aspects associated with identified AdvSMR operational concepts. The main objective of this phase was to develop an analytical and descriptive framework that will help systems and human factors engineers to understand the design and operational requirements of the emerging generation of small, advanced, multi-modular reactors. Using EBR-II as a predecessor to emerging sodium-cooled reactor designs required the application of a method suitable to the structured and systematic analysis of the plant to assist in identifying key features of the work associated with it and to clarify the operational and other constraints. The analysis included the identification and description of operating scenarios that were considered characteristic of this type of nuclear power plant. This is an invaluable aspect of Operational Concept development since it typically reveals aspects of future plant configurations that will have an impact on operations. These include, for example, the effect of core design, different coolants, reactor-to-power conversion unit ratios, modular plant layout, modular versus central control rooms, plant siting, and many more. Multi-modular plants in particular are expected to have a significant impact on overall OpsCon in general, and human performance in particular. To support unconventional modes of operation, the modern control room of a multi-module plant would typically require advanced HSIs that would provide sophisticated operational information visualization, coupled with adaptive automation schemes and operator support systems to reduce complexity. These all have to be mapped at some point to human performance requirements. The EBR-II results will be used as a baseline that will be extrapolated in the extended Cognitive Work Analysis phase to the analysis of a selected advanced sodium-cooled SMR design as a way to establish non-conventional operational concepts. The Work Domain Analysis results achieved during this phase have not only established an organizing and analytical framework for describing existing sociotechnical systems, but have also indicated that the method is particularly suited to the analysis of prospective and immature designs. The results of the EBR-II Work Domain Analysis have indicated that the methodology is scientifically sound and generalizable to any operating environment.

  20. Hawaii Clean Energy Initiative (HCEI) Scenario Analysis: Quantitative Estimates Used to Facilitate Working Group Discussions (2008-2010)

    SciTech Connect (OSTI)

    Braccio, R.; Finch, P.; Frazier, R.

    2012-03-01T23:59:59.000Z

    This report provides details on the Hawaii Clean Energy Initiative (HCEI) Scenario Analysis to identify potential policy options and evaluate their impact on reaching the 70% HECI goal, present possible pathways to attain the goal based on currently available technology, with an eye to initiatives under way in Hawaii, and provide an 'order-of-magnitude' cost estimate and a jump-start to action that would be adjusted with a better understanding of the technologies and market.

  1. The Moon Glistens: A New Work for Band by Joni Greene: A Conductor's Analysis

    E-Print Network [OSTI]

    Simons, Chad P.

    2014-05-31T23:59:59.000Z

    in the various ensembles within the UT band program. During the spring semester of 2001, Greene met Rafael Hernandez, a masters candidate and a teaching assistant in the UT composition department. After submitting some short works for Hernandez review, she... soon began taking weekly composition lessons with him. This was Greenes first formal training in musical composition and lead to the completion of her first piece: Wave. After meeting with some success studying with Hernandez, Greene auditioned...

  2. Mathematical analysis of temperature accelerated David Aristoff (joint work with T. Leli`evre)

    E-Print Network [OSTI]

    Aristoff, David

    2014 7 / 26 #12;TAD TAD is an algorithm for generating the coarse dynamics at low temperature, proposed by A.F. Voter and M. Sørensen in 2000. TAD is a popular algorithm: the original article is cited 255 analysis focuses on a modified version of TAD which we propose, which we show should decrease error

  3. A comparison of current work-hardening models used in the analysis of plastic deformations

    E-Print Network [OSTI]

    Vaughn, David Kenneth

    1973-01-01T23:59:59.000Z

    stress-strain curve, 6061-T6 aluminum. 91 15 Uniaxial reversed loading of 6061-T6 aluminum, isotropic hardening 92 16 Uniaxial reversed loading of 6061-T6 aluminum, kinematic hardening 93 17 Uniaxial reversed loading of 6061-T6 aluminum, mechanical... sublayer model (4 sublayers) 94 viii LIST OF FIGURES (Continued) FIGURE PAGE 18 Uniaxial reversed loading of 6061-T6 aluminum, mechanical sublayer model (2 sublayers) 95 19 Uniaxial reversed loading of 6061-T6 aluminum, Mroz model (4 work hardening...

  4. The Physics Analysis of a Gas Attenuator with Argon as a Working Gas

    SciTech Connect (OSTI)

    Ryutov,, D.D.

    2010-12-07T23:59:59.000Z

    A gas attenuator is an important element of the LCLS facility. The attenuator must operate in a broad range of x-ray energies, provide attenuation coefficient between 1 and 10{sup 4} with the accuracy of 1% and, at the same time, be reliable and allow for many months of un-interrupted operation. S. Shen has recently carried out a detailed design study of the attenuator based on the use of nitrogen as a working gas. In this note we assess the features of the attenuator based on the use of argon. We concentrate on the physics issues, not the design features.

  5. A Contextual Analysis and Performance Guide of Selected Works for Solo Bass Trombone by Norman Bolter.

    E-Print Network [OSTI]

    Oleksiak, Eric

    2014-05-31T23:59:59.000Z

    guide and analysis allow future bass trombonists to gain a deeper understanding of the music. 1 Norman Bolter and Carol Viera, About Us: Norman Bolter's Biography, March 17, 2014, accessed March... 3 Norman Bolter and Carol Viera, About Us: Norman Bolter's Biography, March 17, 2014, accessed March 17, 2014, http://www.air-ev.com/normanbolter.cfm. 4 Norman Bolter, The Blue of Neptune: Program Notes (Chestnut Hill, MA: Air...

  6. ARM - Engineering Work Request & Engineering Work Order Guidelines

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcal Documentation DataDatastreamswacrspeccmaskcopolDatastreamsxsacrslrAlaskaDefensiveProcesses Engineering

  7. Surfactant/detergent titration analysis method and apparatus for machine working fluids, surfactant-containing wastewater and the like

    DOE Patents [OSTI]

    Smith, Douglas D. (Knoxville, TN); Hiller, John M. (Oak Ridge, TN)

    1998-01-01T23:59:59.000Z

    The present invention is an improved method and related apparatus for quantitatively analyzing machine working fluids and other aqueous compositions such as wastewater which contain various mixtures of cationic, neutral, and/or anionic surfactants, soluble soaps, and the like. The method utilizes a single-phase, non-aqueous, reactive titration composition containing water insoluble bismuth nitrate dissolved in glycerol for the titration reactant. The chemical reaction of the bismuth ion and glycerol with the surfactant in the test solutions results in formation of micelles, changes in micelle size, and the formation of insoluble bismuth soaps. These soaps are quantified by physical and chemical changes in the aqueous test solution. Both classical potentiometric analysis and turbidity measurements have been used as sensing techniques to determine the quantity of surfactant present in test solutions. This method is amenable to the analysis of various types of new, in-use, dirty or decomposed surfactants and detergents. It is a quick and efficient method utilizing a single-phase reaction without needing a separate extraction from the aqueous solution. It is adaptable to automated control with simple and reliable sensing methods. The method is applicable to a variety of compositions with concentrations from about 1% to about 10% weight. It is also applicable to the analysis of waste water containing surfactants with appropriate pre-treatments for concentration.

  8. Surfactant/detergent titration analysis method and apparatus for machine working fluids, surfactant-containing wastewater and the like

    DOE Patents [OSTI]

    Smith, D.D.; Hiller, J.M.

    1998-02-24T23:59:59.000Z

    The present invention is an improved method and related apparatus for quantitatively analyzing machine working fluids and other aqueous compositions such as wastewater which contain various mixtures of cationic, neutral, and/or anionic surfactants, soluble soaps, and the like. The method utilizes a single-phase, non-aqueous, reactive titration composition containing water insoluble bismuth nitrate dissolved in glycerol for the titration reactant. The chemical reaction of the bismuth ion and glycerol with the surfactant in the test solutions results in formation of micelles, changes in micelle size, and the formation of insoluble bismuth soaps. These soaps are quantified by physical and chemical changes in the aqueous test solution. Both classical potentiometric analysis and turbidity measurements have been used as sensing techniques to determine the quantity of surfactant present in test solutions. This method is amenable to the analysis of various types of new, in-use, dirty or decomposed surfactants and detergents. It is a quick and efficient method utilizing a single-phase reaction without needing a separate extraction from the aqueous solution. It is adaptable to automated control with simple and reliable sensing methods. The method is applicable to a variety of compositions with concentrations from about 1% to about 10% weight. It is also applicable to the analysis of waste water containing surfactants with appropriate pre-treatments for concentration. 1 fig.

  9. Analysis of power loss data for the 200 Area Tank Farms in support of K Basin SAR work

    SciTech Connect (OSTI)

    Shultz, M.V. Jr.

    1994-12-01T23:59:59.000Z

    An analysis of power loss data for the 200 Area Tank Farms was performed in support of K Basin safety analysis report work. The purpose of the analysis was to establish a relationship between the length of a power outage and its yearly frequency. This relationship can be used to determine whether the duration of a specific power loss is a risk concern. The information was developed from data contained in unusual occurrence reports (UORs) spanning a continuous period of 19.75 years. The average frequency of power loss calculated from the UOR information is 1.22 events per year. The mean of the power loss duration is 32.5 minutes an the median duration is 2 minutes. Nine events resulted in loss of power to both 200 East and 200 West areas simultaneously. Seven events (not necessarily the same events that resulted in loss of power to both 200 areas) resulted in outage durations exceeding 5 minutes. Approximately one-half of the events were caused by human error. The other half resulted from natural phenomena or equipment failures. None of the outages were reported to have any adverse effect on the tank farms.

  10. An analysis of accident experience at entrance ramps within construction work zones at long-term freeway reconstruction projects in Texas

    E-Print Network [OSTI]

    Casteel, David Bryan

    1991-01-01T23:59:59.000Z

    AN ANALYSIS OF ACCIDENT EXPERIENCE AT ENTRANCE RAMPS WITHIN CONSTRUCTION WORK ZONES AT LONG-TERM FREEWAY RECONSTRUCTION PROJECTS IN TEXAS A Thesis by DAVID BRYAN CASTEEL Submitted to the Office of Graduate Studies of Texas A&M University... in partial fulfillment of the requirements for the degree of MASTER OF SCIENCE August 1991 Major Subject: Civil Engineering AN ANALYSIS OF ACCIDENT EXPERIENCE AT ENTRANCE RAMPS WITHIN CONSTRUCTION WORK ZONES AT LONG-TERM FREEWAY RECONSTRUCTION PROJECTS...

  11. A SHARP ANALYSIS ON THE ASYMPTOTIC BEHAVIOR OF THE DURBIN-WATSON STATISTIC FOR THE FIRST-ORDER

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    A SHARP ANALYSIS ON THE ASYMPTOTIC BEHAVIOR OF THE DURBIN-WATSON STATISTIC FOR THE FIRST a sharp analysis on the as- ymptotic behavior of the Durbin-Watson statistic. We focus our attention for the Durbin-Watson statistic. Finally, we propose a new bilateral statistical test for residual

  12. Directives System Order

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1995-10-16T23:59:59.000Z

    The order prescribes the process for development of Policy Statements, Orders, Notices, Manuals and Guides, which are intended to guide, inform, and instruct employees in the performance of their jobs, and enable them to work effectively within the Department and with agencies, contractors, and the public.

  13. Optimization of high-order harmonic generation by genetic algorithm and wavelet time-frequency analysis of quantum dipole emission

    E-Print Network [OSTI]

    Chu, Xi; Chu, Shih-I

    2001-07-13T23:59:59.000Z

    -order har- monic generation ~HHG! of orders as high as 300 has been observed @5,6#, with photon energies in excess of 500 eV. A novel concept of intra-atomic phase matching has been recently introduced, allowing the enhancement of the inten- sity of a..., as shown in Fig. 2, the major time domain contributing to the total har- monic intensity is the central part of the laser pulse with significant field intensity ~for example, between 24 to 14 optical cycles!. Beyond this central time regime, the har- monic...

  14. Experimental and numerical analysis of pre-compressed masonry walls in two-way-bending with second order effects

    SciTech Connect (OSTI)

    Milani, Gabriele, E-mail: milani@stru.polimi.it [Department of Architecture, Built Environment and Construction Engineering (ABC), Politecnico diMilano, Piazza Leonardo da Vinci 32, 20133 Milan (Italy); Olivito, Renato S. [Dipartimento di Ingegneria Civile - Universit della Calabria Via P Bucci 39 B - 87036 RENDE (CS) (Italy); Tralli, Antonio [Department of Engineering, University of Ferrara, Via Saragat 1, 44100 Ferrara (Italy)

    2014-10-06T23:59:59.000Z

    The buckling behavior of slender unreinforced masonry (URM) walls subjected to axial compression and out-of-plane lateral loads is investigated through a combined experimental and numerical homogenizedapproach. After a preliminary analysis performed on a unit cell meshed by means of elastic FEs and non-linear interfaces, macroscopic moment-curvature diagrams so obtained are implemented at a structural level, discretizing masonry by means of rigid triangular elements and non-linear interfaces. The non-linear incremental response of the structure is accounted for a specific quadratic programming routine. In parallel, a wide experimental campaign is conducted on walls in two way bending, with the double aim of both validating the numerical model and investigating the behavior of walls that may not be reduced to simple cantilevers or simply supported beams. Panels investigated are dry-joint in scale square walls simply supported at the base and on a vertical edge, exhibiting the classical Rondelets mechanism. The results obtained are compared with those provided by the numerical model.

  15. CFHTLenS: A Gaussian likelihood is a sufficient approximation for a cosmological analysis of third-order cosmic shear statistics

    E-Print Network [OSTI]

    Simon, P; van Waerbeke, L; Hoekstra, H; Erben, T; Fu, L; Harnois-Draps, J; Heymans, C; Hildebrandt, H; Kilbinger, M; Kitching, T D; Miller, L; Schrabback, T

    2015-01-01T23:59:59.000Z

    We study the correlations of the shear signal between triplets of sources in the Canada-France-Hawaii Lensing Survey (CFHTLenS) to probe cosmological parameters via the matter bispectrum. In contrast to previous studies, we adopted a non-Gaussian model of the data likelihood which is supported by our simulations of the survey. We find that for state-of-the-art surveys, similar to CFHTLenS, a Gaussian likelihood analysis is a reasonable approximation, albeit small differences in the parameter constraints are already visible. For future surveys we expect that a Gaussian model becomes inaccurate. Our algorithm for a refined non-Gaussian analysis and data compression is then of great utility especially because it is not much more elaborate if simulated data are available. Applying this algorithm to the third-order correlations of shear alone in a blind analysis, we find a good agreement with the standard cosmological model: $\\Sigma_8$=$\\sigma_8$ $(\\Omega_{\\rmm}/0.27)^{0.64}$=$0.79^{+0.08}_{-0.11}$ for a flat $\\La...

  16. Microstructural study and densification analysis of hot work tool steel matrix composites reinforced with TiB{sub 2} particles

    SciTech Connect (OSTI)

    Fedrizzi, A., E-mail: anna.fedrizzi@ing.unitn.it [Department of Industrial Engineering, University of Trento, Via Mesiano 77, 38123 Trento (Italy); Pellizzari, M. [Department of Industrial Engineering, University of Trento, Via Mesiano 77, 38123 Trento (Italy); Zadra, M. [K4Sint, Start-up of the University of Trento, Viale Dante 300, 38057 Pergine Valsugana (Italy); Marin, E. [Department of Chemistry, Physics and Environment, University of Udine, Via Cotonificio 108, 33100 Udine (Italy)

    2013-12-15T23:59:59.000Z

    Hot work tool steels are characterized by good toughness and high hot hardness but are less wear resistant than other tooling materials, such as high speed steel. Metal matrix composites show improved tribological behavior, but not much work has been done in the field of hot work tool steels. In this paper TiB{sub 2}-reinforced hot work tool steel matrix composites were produced by spark plasma sintering (SPS). Mechanical alloying (MA) was proposed as a suited process to improve the composite microstructure. Density measurements and microstructure confirmed that MA promotes sintering and produces a fine and homogeneous dispersion of reinforcing particles. X-ray diffraction patterns of the sintered composites highlighted the formation of equilibrium Fe{sub 2}B and TiC, as predicted by thermodynamic calculations using Thermo-Calc software. Scanning electron microscopy as well as scanning Kelvin probe force microscopy highlighted the reaction of the steel matrix with TiB{sub 2} particles, showing the formation of a reaction layer at the TiB{sub 2}-steel interface. Phase investigations pointed out that TiB{sub 2} is not chemically stable in steel matrix because of the presence of carbon even during short time SPS. - Highlights: TiB{sub 2} reinforced steel matrix composites were produced by spark plasma sintering. TiB{sub 2} was successfully dispersed in the steel matrix by mechanical alloying. Steel and TiB{sub 2} react during sintering forming equilibrium Fe{sub 2}B and TiC. The new phases were investigated by means of AFM, Volta potential and XRD analyses.

  17. A point of order 8

    E-Print Network [OSTI]

    Semjon Adlaj

    2011-10-03T23:59:59.000Z

    A formula expressing a point of order 8 on an elliptic curve, in terms of the roots of the associated cubic polynomial, is given. Doubling such a point yields a point of order 4 distinct from the well-known points of order 4 given in standard references such as "A course of Modern Analysis" by Whittaker and Watson.

  18. Math 100 --Matlab Assignment 1, due at the end of class on Sept.2, 2010 In order to save both your commands and their output while working in the Command window

    E-Print Network [OSTI]

    Fasshauer, Greg

    Math 100 -- Matlab Assignment 1, due at the end of class on Sept.2, 2010 In order to save both your file (a simple text file that you can view with any text editor, such as the Matlab Editor). Before you start doing any of the following assignments do the following: · Make sure you know Matlab's "Current

  19. Analysis of the working process and mechanical losses in a Stirling engine for a solar power unit

    SciTech Connect (OSTI)

    Makhkamov, K.K. [Uzbek Academy of Sciences, Tashkent (Uzbekistan). Physical and Technical Inst.; Ingham, D.B. [Univ. of Leeds (United Kingdom). Dept. of Applied Mathematics

    1999-05-01T23:59:59.000Z

    In this paper a second level mathematical model for the computational simulation of the working process of a 1-kW Stirling engine has been used and the results obtained are presented. The internal circuit of the engine in the calculation scheme was divided into five chambers, namely, the expansion space, heater, regenerator, cooler and the compression space, and the governing system of ordinary differential equations for the energy and mass conservation were solved in each chamber by Euler`s method. In addition, mechanical losses in the construction of the engine have been determined and the computational results show that the mechanical losses for this particular design of the Stirling engine may be up to 50% of the indicated power of the engine.

  20. Working Paper

    E-Print Network [OSTI]

    2010-07-16T23:59:59.000Z

    Jul 2, 2010 ... Working Paper. Branch and Bound Algorithms for ...... interest when evaluating the performance. First, each derived subproblem means usage...

  1. Higher Order Mutation Testing Submitted in fulfilment of the requirements for the

    E-Print Network [OSTI]

    Harman, Mark

    and Analysis: MSR for App Stores" (short paper), in Proceedings of the 9th Work- ing Conference on Mining- posium and the 13th European conference on Foundations of software engineer- ing (ESEC/FSE '11), Szeged faults Using Higher Order Mutation Testing", in Proceedings of the 8th International Working Confer- ence

  2. Work Force Discipline

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1983-03-23T23:59:59.000Z

    The order provides guidance and procedures and states responsibilities for maintaining work force discipline in DOE. Chg 1, dated 3-11-85; Chg 2, dated 1-6-86; Chg 3, dated 3-21-89; Chg 4, dated 8-2-90; Chg 5, dated 3-9-92; Chg 6, dated 8-21-92, cancels Chg 5.

  3. Going To Work: Work Relationships

    E-Print Network [OSTI]

    Hoffman, Rosemarie

    2000-07-20T23:59:59.000Z

    One of a worker's top goals should be to develop good relationships with coworkers and supervisers. This publication discusses five general rules for building good relationships at work and offers advice on handling criticism....

  4. Work Plan

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear SecurityTensile Strain Switched FerromagnetismWaste and MaterialsWenjun1 Table 1.14 Sales of4) MonthlyWork &Work

  5. Working Copy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered energy consumption byAbout PrintableBlenderWhatFellowsWood and4213WorkWork

  6. Fermilab at Work | Work Resources

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation ProposedUsing ZirconiaPolicyFeasibility ofSmall Works:OklahomaatWayneFermilab NowLab LifeWork

  7. Analysis and modeling of Spain's power sector in order to define the best incentive policies for achieving an optimum energy mix

    E-Print Network [OSTI]

    Ibez Lpez, A. Santiago (Antonio Santiago)

    2013-01-01T23:59:59.000Z

    The goal of this thesis is the development of a model of the Spanish energy mix in order to be able to forecast its evolution in function of exogenous variables such as the public opinion about specific technologies, the ...

  8. Solving the viscous hydrodynamics order by order

    E-Print Network [OSTI]

    Jian-Hua Gao; Shi Pu

    2014-09-02T23:59:59.000Z

    In this paper, we propose a method of solving the viscous hydrodynamics order by order in a derivative expansion. In such method, the zero order solution is just the one of the ideal hydrodynamics. All the other higher order corrections satisfy the same first-order partial differential equations but with different inhomogeneous terms. We therefore argue that our method could be easily extended to any orders. The problem of causality and stability will be released if the gradient expansion is guaranteed. This method might be of great help to both theoretical and numerical calculations of relativistic hydrodynamics.

  9. LIVE. WORK. CELEBRATE. Email order to: Beverlyhills@cort.com

    E-Print Network [OSTI]

    Williams, Gary A.

    and Lamp LIVING ROOM: Sofa, Chair, Cocktail Table, End Table, Lamp, plus 32" LCD TV with Stand STUDY: Chair TV with Stand, Accent Pillows and 3 Pieces of Artwork STUDY: Chair and Lamp DINING ROOM: Dining Table drop it off, set it up and pick it up n No heavy lifting or assembly required n Fit a student

  10. Comparative analysis of the high-order harmonic generation in the laser ablation plasmas prepared on the surfaces of complex and atomic targets

    SciTech Connect (OSTI)

    Ganeev, R. A. [Scientific Association Akadempribor, Academy of Sciences of Uzbekistan, Akademgorodok, Tashkent 100125 (Uzbekistan); Institute for Solid State Physics, University of Tokyo, 5-1-5 Kashiwanoha, Kashiwa, Chiba 277-8581 (Japan); Milosevic, D. B. [Faculty of Science, University of Sarajevo, Zmaja od Bosne 35, 71000 Sarajevo (Bosnia and Herzegowina); Max-Born-Institut, Max-Born-Strasse 2a, 12489 Berlin (Germany)

    2008-07-15T23:59:59.000Z

    We analyzed high-order harmonic generation from the plasma plumes prepared on the surfaces of complex targets. The studies of In-Ag targets showed that the characteristics of the high-order harmonics from the double-target plume were the same as those from the single-target plasmas. For the chromium-tellurium plasma, the enhancements of the 29th and 27th harmonics were obtained, thus indicating the appearance of the enhancement properties from both components of the double-target plasma. These comparative studies also showed higher enhancement of a single harmonic in the case of atomic plasma (Sb) with regard to the molecular one (InSb). The additional component can only decrease the enhancement factor of the medium, due to the change of the oscillator strength and spectral distribution of the transitions involved in the resonance enhancement of the specific harmonic order. The theoretical calculations have shown the enhancement of specific harmonics for the Sb, Te, and Cr plasmas in the double-target configurations.

  11. Publications Order Form Order by Mail

    E-Print Network [OSTI]

    Borenstein, Elhanan

    and Improving Nutrition and Growth of Western Forests Global Resources and Markets: Issues and Trends Mineral.00 $10.50 $5.00 $10.00 $35.00 $20.00 Quantity Total books Total $ $ $ $ $ $ $ $ $ $ $ $ $ $ Total Cost Washington State residents add sales tax of 9.0% Total Order with tax if applicable: Order Totals #12

  12. 4096 J. Org. Chem. 1994,59, 4096-4103 A Practical Guide to First-OrderMultipletAnalysis in lH NMR

    E-Print Network [OSTI]

    Gates, Kent. S.

    ., Sternhell, S. In International Series of Monographs in Organic Chemistry;Barton,D. H.R.,Doering,W., Eds Spectroscopy Thomas R. Hoye,*Paul R. Hanson,la and James R. Vyvyanlb Department of Chemistry, University or more stereocenters in a molecule. Most books and treatises that deal with couplingconstant analysis

  13. Cryoelectron Microscopy as a Functional Instrument for Systems Biology, Structural Analysis & Experimental Manipulations with Living Cells. A comprehensive review of the current works

    E-Print Network [OSTI]

    Oleg V. Gradov; Margaret A. Gradova

    2015-01-18T23:59:59.000Z

    The aim of this paper is to give an introductory review of the cryoelectron microscopy as a complex data source for the most of the system biology branches, including the most perspective non-local approaches known as "localomics" and "dynamomics". A brief summary of various cryoelectron mi-croscopy methods and corresponding system biological ap-proaches is given in the text. The above classification can be considered as a useful framework for the primary comprehen-sions about cryoelectron microscopy aims and instrumental tools. We do not discuss any of these concepts in details, but merely point out that their methodological complexity follows only from the structure-functional complexity of biological systems which are investigated in this manner. We also postu-late that one can employ some of the cryoelectron microscopic techniques not only for observation, but also for modification and structural refunctionalization of some biological and similar soft matter objects and microscopic samples. In other worlds, we start with the cryoelectron microscopy as a tool for the sys-tem biology and progress to its applying as an instrument for system biology and functional biomimetics; i.e. "system cryobi-ology" goes over into "synthetic cryobiology" or "cryogenic biomimetics". All these conclusions can be deduced from the most recent works of the latest years, including just submitted foreign papers. This article provides an up-to-date description of the conceptual basis for the novel view on the computational cryoelectron microscopy (in silico) approaches and the data mining principles which lie at the very foundation of modern structural analysis and reconstruction.

  14. AIAA 99--1467 LOW ORDER AERODYNAMIC

    E-Print Network [OSTI]

    Peraire, Jaime

    AIAA 99--1467 LOW ORDER AERODYNAMIC MODELS FOR AEROELASTIC CONTROL OF TURBOMACHINES K.E. Willcox, J of Aeronautics and Astronautics 1801 Alexander Bell Drive, Suite 500, Reston, VA 22091 #12; LOW ORDER AERODYNAMIC order aerodynamic model is developed for aeroelastic analysis of turbomachines. The proper or­ thogonal

  15. On the order of general linear methods.

    SciTech Connect (OSTI)

    Constantinescu, E. M.; Mathematics and Computer Science

    2009-09-01T23:59:59.000Z

    General linear (GL) methods are numerical algorithms used to solve ODEs. The standard order conditions analysis involves the GL matrix itself and a starting procedure; however, a finishing method (F) is required to extract the actual ODE solution. The standard order analysis and stability are sufficient for the convergence of any GL method. Nonetheless, using a simple GL scheme, we show that the order definition may be too restrictive. Specifically, the order for GL methods with low order intermediate components may be underestimated. In this note we explore the order conditions for GL schemes and propose a new definition for characterizing the order of GL methods, which is focused on the final result--the outcome of F--and can provide more effective algebraic order conditions.

  16. Ordered involutive operator spaces

    E-Print Network [OSTI]

    Blecher, David P; Neal, Matthew; Werner, Wend

    2007-01-01T23:59:59.000Z

    This is a companion to recent papers of the authors; here we construct the `noncommutative Shilov boundary' of a (possibly nonunital) selfadjoint ordered space of Hilbert space operators. The morphisms in the universal property of the boundary preserve order. As an application, we consider `maximal' and `minimal' unitizations of such ordered operator spaces.

  17. IMPRESS CONNECT DOCUMENT ORDERING

    E-Print Network [OSTI]

    Asaithambi, Asai

    IMPRESS CONNECT DOCUMENT ORDERING USER GUIDE FOR UNF August 2010 #12;OFFICEMAX IMPRESS CONNECT USERMax (case sensitive) Click on "Create New Custom Print Order" under Print & Document Services #12;The first landing page. You will see 3 options across the top of the landing page: Order Jobs, Track Jobs, Manage

  18. LMP-MIT-TGG-03-12-09-2004 (12 December 2004) 1 WORKING DRAFT LIFE CYCLE ANALYSIS OF CONVENTIONAL MANUFACTURING TECHNIQUES

    E-Print Network [OSTI]

    Gutowski, Timothy

    casting uses significant quantities of energy, as well as materials like oil-based lubricants and cooling effects of equipment manufacture can then be amortized over the many years of service. This analysis

  19. Technical Basis for Work Place Air Monitoring for the Plutonium Finishing Plan (PFP)

    SciTech Connect (OSTI)

    JONES, R.A.

    1999-10-06T23:59:59.000Z

    This document establishes the basis for the Plutonium Finishing Plant's (PFP) work place air monitoring program in accordance with the following requirements: Title 10, Code of Federal Regulations (CFR), Part 835 ''Occupational Radiation Protection''; Hanford Site Radiological Control Manual (HSRCM-1); HNF-PRO-33 1, Work Place Air Monitoring; WHC-SD-CP-SAR-021, Plutonium Finishing Plant Final Safety Analysis Report; and Applicable recognized national standards invoked by DOE Orders and Policies.

  20. SECOND ORDER ANALYSIS OF STATE-CONSTRAINED ...

    E-Print Network [OSTI]

    2014-11-06T23:59:59.000Z

    will take advantage of the product structure that one can find in essentially all practical applications ..... heating and cooling by solar energy. Appl. Math. Optim.

  1. Static analysis of Higher-order programs

    E-Print Network [OSTI]

    Might, Matt

    -crime each year. FBI Why: Verification 9 Bugs cost U.S. economy $60 billion annually. NIST #12;Why: Security Source: CSI/FBI Survey 2007 Vulnerabilities Fraud Dumb Employees DoS Cost of cybercrime ($80bn) 10 #12 2008Source: CSI/FBI Survey 2007 Vulnerabilities Fraud Dumb Employees DoS Type of vulnerability

  2. Word Order Variables in Patzun Kaqchikel

    E-Print Network [OSTI]

    Kim, Sok-Ju

    2011-10-03T23:59:59.000Z

    with the previous analysis of word orders in (Patzicia) Kaqchikel by Broadwell (2000).2 In Patzun Kaqchikel, in intransitive clauses, either SV word order or VS word order is possible in statements and questions. (1) a. ri n...-tzih n-anin3 def poss.1sg-dog inc.3sA-run My dog runs. SV+statement Does my dog run? SV+question b. n-anin ri n-tzih inc.3s...

  3. Superconductors with Topological Order

    E-Print Network [OSTI]

    M. C. Diamantini; P. Sodano; C. A. Trugenberger

    2005-11-18T23:59:59.000Z

    We propose a mechanism of superconductivity in which the order of the ground state does not arise from the usual Landau mechanism of spontaneous symmetry breaking but is rather of topological origin. The low-energy effective theory is formulated in terms of emerging gauge fields rather than a local order parameter and the ground state is degenerate on topologically non-trivial manifolds. The simplest example of this mechanism of superconductivty is concretely realized as global superconductivty in Josephson junction arrays.

  4. On Second Order Optimality Conditions in Nonlinear Optimization

    E-Print Network [OSTI]

    Roberto Andreani

    2014-08-15T23:59:59.000Z

    Aug 15, 2014 ... Abstract: In this work we present new weak conditions that ensure the validity of necessary second order optimality conditions (SOC) for...

  5. On ordered $?$-semigroups ($?$-semigroups)

    E-Print Network [OSTI]

    Niovi Kehayopulu

    2014-03-05T23:59:59.000Z

    We add here some further characterizations to the characterizations of strongly regular ordered $\\Gamma$-semigroups already considered in Hacettepe J. Math. 42 (2013), 559--567. Our results generalize the characterizations of strongly regular ordered semigroups given in the Theorem in Math. Japon. 48 (1998), 213--215, in case of ordered $\\Gamma$-semigroups. The aim of writing this paper is not just to add a publication in $\\Gamma$-semigroups but, mainly, as a continuation of the paper "On regular duo $po$-$\\Gamma$-semigroups in Math. Slovaca 61 (2011), 871--884, to publish a paper which serves as an example to show what a $\\Gamma$-semigroup is and give the right information about this structure.

  6. Nested Topological Order

    E-Print Network [OSTI]

    H. Bombin; M. A. Martin-Delgado

    2008-03-30T23:59:59.000Z

    We introduce the concept of nested topological order in a class of exact quantum lattice Hamiltonian models with non-abelian discrete gauge symmetry. The topological order present in the models can be partially destroyed by introducing a gauge symmetry reduction mechanism. When symmetry is reduced in several islands only, this imposes boundary conditions to the rest of the system giving rise to topological ground state degeneracy. This degeneracy is related to the existence of topological fluxes in between islands or, alternatively, hidden charges at islands. Additionally, island deformations give rise to an extension of topological quantum computation beyond quasiparticles.

  7. Review: [Untitled] Reviewed Work(s)

    E-Print Network [OSTI]

    Elman, Benjamin

    Review: [Untitled] Reviewed Work(s): Dodonæus in Japan: Translation and the Scientific Mind to leading academic journals and scholarly literature from around the world. The Archive is supported-for-profit organization with a mission to help the scholarly community take advantage of advances in technology. For more

  8. QEP WORKING GROUP CHARGES Assessment Working Group

    E-Print Network [OSTI]

    Liu, Paul

    and a framework that details timelines, leadership, resource allocation, and an assessment plan that is clearlyQEP WORKING GROUP CHARGES Assessment Working Group The topic of the QEP should fit should be supported by a thorough understanding of the institutional context and by assessment data

  9. Technical change to the work plan for the remedial investigation of the Salmon Site, Lamar County, Mississippi: Sampling and analysis plan background soil and groundwater study

    SciTech Connect (OSTI)

    NONE

    1998-04-01T23:59:59.000Z

    The Salmon Site, formerly known as the Tatum Dome Test Site, is located in south-central Mississippi, southwest of the city of Hattiesburg, in Lamar County. Between 1964 and 1970, two nuclear and two non-nuclear gas explosions were conducted deep underground in the Tatum Salt Dome beneath the site. The tests were performed as part of the former US Atomic Energy Commission`s Vela Uniform Program which was conducted to improve the United States` capability to detect underground nuclear explosions. This document details technical changes to the existing work plan for the remedial investigation of the Salmon Site. A previously conducted Remedial Investigation for the Salmon Site involved the preparation of ecological and human health risk assessments. These risk assessments, which are incorporated into the Remedial Investigation Report, identified several constituents of potential concern (COPC) that could potentially have a negative impact on ecological and human health. These COPC are the primary risk drivers for the Salmon Site; they include arsenic and naturally occurring, gamma-emitting radionuclides. If it can be demonstrated that similar concentrations of these COPCs occur naturally in surrounding areas, they can be removed from consideration in the risk assessments. The purpose of this sampling effort is to collect enough data to prove that the COPCs are naturally occurring and are not a result of the explosives testing activities conducted at the site. This will be accomplished by collecting enough soil samples to have a statistically valid population that can be used to produce defensible comparisons that prove the concentrations identified on site are the same as the background concentrations in surrounding areas.

  10. Team work: Construction

    E-Print Network [OSTI]

    Berdichevsky, Victor

    Team work: Construction Management The Division of Engineering Technology in an construction technology area, an associate degree in construction science, or college- level course work equivalent to an associate degree in construction related area

  11. Interagency Sustainability Working Group

    Broader source: Energy.gov [DOE]

    The Interagency Sustainability Working Group (ISWG) is the coordinating body for sustainable buildings in the federal government.

  12. Effects of Second-Order Hydrodynamics on a Semisubmersible Floating Offshore Wind Turbine: Preprint

    SciTech Connect (OSTI)

    Bayati, I.; Jonkman, J.; Robertson, A.; Platt, A.

    2014-07-01T23:59:59.000Z

    The objective of this paper is to assess the second-order hydrodynamic effects on a semisubmersible floating offshore wind turbine. Second-order hydrodynamics induce loads and motions at the sum- and difference-frequencies of the incident waves. These effects have often been ignored in offshore wind analysis, under the assumption that they are significantly smaller than first-order effects. The sum- and difference-frequency loads can, however, excite eigenfrequencies of the system, leading to large oscillations that strain the mooring system or vibrations that cause fatigue damage to the structure. Observations of supposed second-order responses in wave-tank tests performed by the DeepCwind consortium at the MARIN offshore basin suggest that these effects might be more important than originally expected. These observations inspired interest in investigating how second-order excitation affects floating offshore wind turbines and whether second-order hydrodynamics should be included in offshore wind simulation tools like FAST in the future. In this work, the effects of second-order hydrodynamics on a floating semisubmersible offshore wind turbine are investigated. Because FAST is currently unable to account for second-order effects, a method to assess these effects was applied in which linearized properties of the floating wind system derived from FAST (including the 6x6 mass and stiffness matrices) are used by WAMIT to solve the first- and second-order hydrodynamics problems in the frequency domain. The method has been applied to the OC4-DeepCwind semisubmersible platform, supporting the NREL 5-MW baseline wind turbine. The loads and response of the system due to the second-order hydrodynamics are analysed and compared to first-order hydrodynamic loads and induced motions in the frequency domain. Further, the second-order loads and induced response data are compared to the loads and motions induced by aerodynamic loading as solved by FAST.

  13. Seismic Isolation Working Meeting Gap Analysis Report

    SciTech Connect (OSTI)

    Justin Coleman; Piyush Sabharwall

    2014-09-01T23:59:59.000Z

    The ultimate goal in nuclear facility and nuclear power plant operations is operating safety during normal operations and maintaining core cooling capabilities during off-normal events including external hazards. Understanding the impact external hazards, such as flooding and earthquakes, have on nuclear facilities and NPPs is critical to deciding how to manage these hazards to expectable levels of risk. From a seismic risk perspective the goal is to manage seismic risk. Seismic risk is determined by convolving the seismic hazard with seismic fragilities (capacity of systems, structures, and components (SSCs)). There are large uncertainties associated with evolving nature of the seismic hazard curves. Additionally there are requirements within DOE and potential requirements within NRC to reconsider updated seismic hazard curves every 10 years. Therefore opportunity exists for engineered solutions to manage this seismic uncertainty. One engineered solution is seismic isolation. Current seismic isolation (SI) designs (used in commercial industry) reduce horizontal earthquake loads and protect critical infrastructure from the potentially destructive effects of large earthquakes. The benefit of SI application in the nuclear industry is being recognized and SI systems have been proposed, in the American Society of Civil Engineers (ASCE) 4 standard, to be released in 2014, for Light Water Reactors (LWR) facilities using commercially available technology. However, there is a lack of industry application to the nuclear industry and uncertainty with implementing the procedures outlined in ASCE-4. Opportunity exists to determine barriers associated with implementation of current ASCE-4 standard language.

  14. NREL: Energy Analysis - Working with Us

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas Conchas recoveryLaboratory | National Nuclearover twoPrintable VersionStaff Webmaster

  15. Reimbursable Work for the Department of Homeland Security

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2006-08-17T23:59:59.000Z

    The Order establishes DOE policies and procedures for the acceptance, performance, and administration of reimbursable work directly funded by the Department of Homeland Security.

  16. Interview: LaborWorks@NeighborWorks Provides Vermont Contractors...

    Broader source: Energy.gov (indexed) [DOE]

    Interview: LaborWorks@NeighborWorks Provides Vermont Contractors With Help When They Need It Interview: LaborWorks@NeighborWorks Provides Vermont Contractors With Help When They...

  17. Higher order antibunching is not a rare phenomenon

    E-Print Network [OSTI]

    Prakash Gupta; Pratap Narayan Pandey; Anirban Pathak

    2005-08-08T23:59:59.000Z

    Since the introduction of higher order nonclassical effects, higher order squeezing has been reported in a number of different physical systems but higher order antibunching is predicted only in three particular cases. In the present work, we have shown that the higher order antibunching is not a rare phenomenon rather it can be seen in many simple optical processes. To establish our claim, we have shown it in six wave mixing process, four wave mixing process and in second harmonic generation process.

  18. Negotiating authenticity: a negotiated order study of Valley View Summer Camp

    E-Print Network [OSTI]

    Free, Rebecca J

    2012-06-07T23:59:59.000Z

    The negotiated order framework has frequently been raphics. used to examine the social order of organizations such as hospitals and police departments. It is proposed that negotiation is necessary in order for work to take place because...

  19. Cofinal types of directed orders

    E-Print Network [OSTI]

    Mátrai, Tamás

    , ) directed partial orders #12;Cofinal types (P, ), (Q, ) directed partial orders Tukey reducibility: (P orders Tukey reducibility: (P, ) T (Q, ) if f : P Q X P unbounded = f [X] Q unbounded g : Q P Y Q cofinal = g[Y ] P cofinal #12;Cofinal types (P, ), (Q, ) directed partial orders Tukey reducibility: (P

  20. Work Area Policy

    E-Print Network [OSTI]

    2005-04-19T23:59:59.000Z

    POLICY X.X.X. Volume V, Information Technology. Chapter 6, Acceptable Safety Work Locations. Issuing Office: Department of Mathematics. Responsible...

  1. INL @ work: Archaeologist

    ScienceCinema (OSTI)

    Lowrey, Dino

    2013-05-28T23:59:59.000Z

    INL @ work features jobs performed at the lab. For more information about INL careers, visit http://www.facebook.com/idahonationallaboratory.

  2. INL @ work: Archaeologist

    SciTech Connect (OSTI)

    Lowrey, Dino

    2008-01-01T23:59:59.000Z

    INL @ work features jobs performed at the lab. For more information about INL careers, visit http://www.facebook.com/idahonationallaboratory.

  3. Work Authorization System

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1999-04-20T23:59:59.000Z

    It establishes a work authorization and control process for work performed by designated management and operating (M&O), management and integrating (M&I), environmental restoration management contracts (ERMC) and other contracts determined by the Procurement Executive (hereafter referred to as M&O contractors). Cancels DOE O 5700.7C. Canceled by DOE O 412.1A.

  4. Work Authorization System

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2005-04-21T23:59:59.000Z

    To establish a work authorization and control process for work performed by designated site and facility management contractors, and other contractors as determined by the procurement executive, consistent with the budget execution and program evaluation requirements of the Department of Energy's (DOE's) Planning, Programming, Budgeting, and Evaluation process. Cancels DOE O 412.1.

  5. Work Authorization System

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2005-04-21T23:59:59.000Z

    To establish a work authorization and control process for work performed by designated site and facility management contractors, and other contractors as determined by the procurement executive, consistent with the budget execution and program evaluation requirements of the Department of Energy's Planning, Programming, Budgeting, and Evaluation process. Admin Chg 1, dated 5-21-2014, cancels DOE O 412.1A.

  6. ANOVA-HDMR structure of the higher order nodal diffusion solution

    SciTech Connect (OSTI)

    Bokov, P. M.; Prinsloo, R. H.; Tomasevic, D. I. [South African Nuclear Energy Corporation - Necsa, Building 1900, P.O. Box 582, 0001 Pretoria (South Africa)

    2013-07-01T23:59:59.000Z

    Nodal diffusion methods still represent a standard in global reactor calculations, but employ some ad-hoc approximations (such as the quadratic leakage approximation) which limit their accuracy in cases where reference quality solutions are sought. In this work we solve the nodal diffusion equations utilizing the so-called higher-order nodal methods to generate reference quality solutions and to decompose the obtained solutions via a technique known as High Dimensional Model Representation (HDMR). This representation and associated decomposition of the solution provides a new formulation of the transverse leakage term. The HDMR structure is investigated via the technique of Analysis of Variance (ANOVA), which indicates why the existing class of transversely-integrated nodal methods prove to be so successful. Furthermore, the analysis leads to a potential solution method for generating reference quality solutions at a much reduced calculational cost, by applying the ANOVA technique to the full higher order solution. (authors)

  7. Filiform Lie algebras of order 3

    SciTech Connect (OSTI)

    Navarro, R. M., E-mail: rnavarro@unex.es [Rosa Mara Navarro. Dpto. de Matemticas, Universidad de Extremadura, Cceres (Spain)

    2014-04-15T23:59:59.000Z

    The aim of this work is to generalize a very important type of Lie algebras and superalgebras, i.e., filiform Lie (super)algebras, into the theory of Lie algebras of order F. Thus, the concept of filiform Lie algebras of order F is obtained. In particular, for F = 3 it has been proved that by using infinitesimal deformations of the associated model elementary Lie algebra it can be obtained families of filiform elementary lie algebras of order 3, analogously as that occurs into the theory of Lie algebras [M. Vergne, Cohomologie des algbres de Lie nilpotentes. Application ltude de la varit des algbres de Lie nilpotentes, Bull. Soc. Math. France 98, 81116 (1970)]. Also we give the dimension, using an adaptation of the sl(2,C)-module Method, and a basis of such infinitesimal deformations in some generic cases.

  8. Filiform Lie algebras of order 3

    E-Print Network [OSTI]

    Rosa Navarro

    2014-04-03T23:59:59.000Z

    The aim of this work is to generalize a very important type of Lie algebras and superalgebras, i.e. filiform Lie (super)algebras, into the theory of Lie algebras of order F$. Thus, the concept of filiform Lie algebras of order F is obtained. In particular, for F=3 it has been proved that by using infinitesimal deformations of the associated model elementary Lie algebra it can be obtained families of filiform elementary lie algebras of order 3, analogously as that occurs into the theory of Lie algebras (Vergne, 1970). Also we give the dimension, using an adaptation of the sl(2,C)-module Method, and a basis of such infinitesimal deformations in some generic cases.

  9. Work with Biological Materials

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered energy consumption byAbout PrintableBlenderWhatFellowsWood and4213WorkWork withWork

  10. Construction work process management

    E-Print Network [OSTI]

    Soares, Jorge Barbosa

    1994-01-01T23:59:59.000Z

    -related activities. The study addresses relationships between selected TQM concepts (TQM tools, training, process focus, and teamwork) and work process management, defined in terms of planning, control, and improvement. The investigation was performed in two...

  11. Clean Energy Works (Oregon)

    Broader source: Energy.gov [DOE]

    Clean Energy Works began in 2009 as a pilot program run by the City of Portland. In 2010, the US department of Energy awarded $20 million to create a statewide nonprofit to expand the program...

  12. How Fusion Energy Works

    Broader source: Energy.gov [DOE]

    Fusion energy is the energy source of the sun and all of the stars. As part of How Energy Works, we'll cover everything from fuel sources to plasma physics and beyond.

  13. Fermilab: Science at Work

    ScienceCinema (OSTI)

    Brendan Casey; Herman White; Craig Hogan; Denton Morris; Mary Convery; Bonnie Fleming; Deborah Harris; Dave Schmitz; Brenna Flaugher; Aron Soha

    2013-02-14T23:59:59.000Z

    Six days. Three frontiers. One amazing lab. From 2010 to 2012, a film crew followed a group of scientists at the Department of Energy's Fermilab and filmed them at work and at home. This 40-minute documentary shows the diversity of the people, research and work at Fermilab. Viewers catch a true behind-the-scenes look of the United States' premier particle physics laboratory while scientists explain why their research is important to them and the world.

  14. Fermilab: Science at Work

    SciTech Connect (OSTI)

    Brendan Casey; Herman White; Craig Hogan; Denton Morris; Mary Convery; Bonnie Fleming; Deborah Harris; Dave Schmitz; Brenna Flaugher; Aron Soha

    2013-02-01T23:59:59.000Z

    Six days. Three frontiers. One amazing lab. From 2010 to 2012, a film crew followed a group of scientists at the Department of Energy's Fermilab and filmed them at work and at home. This 40-minute documentary shows the diversity of the people, research and work at Fermilab. Viewers catch a true behind-the-scenes look of the United States' premier particle physics laboratory while scientists explain why their research is important to them and the world.

  15. Form Date 4/4/01 Refrigerant Service Order Form

    E-Print Network [OSTI]

    Russell, Lynn

    Recovery Unit ID # : Added Lbs oz Lbs oz Lbs oz Startup Charge Net Refrigerant Added: Lbs oz Parts UsedForm Date 4/4/01 Refrigerant Service Order Form Service ID: Owner: Work Order #: Building: Date: Issued: Completed: Equipment ID: Technicians: Location: Model: Manufact: Serial #: Refrigerant Type

  16. Toolbox Safety Talk Welding & Metal Work Safety

    E-Print Network [OSTI]

    Pawlowski, Wojtek

    Toolbox Safety Talk Welding & Metal Work Safety Environmental Health & Safety Facilities Safety or harmful emission giving metals. Welding Safety When welding outside of a designated welding booth, ensure injury. Avoid welding on materials such as galvanized or stainless steel in order to minimize toxic fume

  17. Second-Order Fermions and the Standard Model

    E-Print Network [OSTI]

    Espin, Johnny

    2015-01-01T23:59:59.000Z

    We present a construction of a non-hermitian fermionic Lagrangian which has a second-order kinetic term. Despite the non-hermicity of the latter, the theory is unitary and the perturbation theory that can be derived is equivalent to the usual one derived from a first-order formalism. Having this in mind, the construction of a second-order Standard Model allows a more compact description of the theory. This work is based on [1, 2] and citations therein.

  18. Available transfer capability and first order sensitivity

    SciTech Connect (OSTI)

    Gravener, M.H. [PJM Interconnection, L.L.C., Valley Forge, PA (United States)] [PJM Interconnection, L.L.C., Valley Forge, PA (United States); Nwankpa, C. [Drexel Univ., Philadelphia, PA (United States)] [Drexel Univ., Philadelphia, PA (United States)

    1999-05-01T23:59:59.000Z

    A method of calculating Available Transfer Capability and the exploration of the first order effects of certain power system network variables are described. The Federal Energy Regulatory Commission has ordered that bulk electrical control areas must provide to market participants a ``commercially viable`` network transfer capability for the import, export, and through-put of energy. A practical method for deriving this transfer capability utilizing both linear and non-linear power flow analysis methods is developed that acknowledges both thermal and voltage system limitations. The Available Transfer Capability is the incremental transfer capability derived by the method reduced by margins. A procedure for quantifying the first order effect of network uncertainties such as load forecast error and simultaneous transfers on the calculated transfer capability of a power system snapshot are explored. The quantification of these network uncertainties can provide information necessary for system operation, planning, and energy market participation.

  19. Working Title Scientist 3 Auto req ID 1024BR

    E-Print Network [OSTI]

    Mazzotti, Frank

    of these vegetation management efforts. Will work with the staff and management at the field stations. Reports to the Vegetation Management Section's Invasive Species Unit Lead Scientist and will work closely. Prepares required work orders and reports for planning, implementing and documenting vegetation management

  20. Work with Biological Materials

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered energy consumption byAbout PrintableBlenderWhatFellowsWood and4213WorkWork with

  1. Working With Us | NREL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary)morphinanInformation Desert SouthwestTechnologies | Blandine Jerome Careers at WIPPCompletesWork/LifeWorking

  2. ORDER

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of EnergyEnergyENERGY TAXBalanced ScorecardReactor TechnologyOFFICE: NEPA REVIEWS:EnergyORAU

  3. WORK PROGRAMME 2010 COOPERATION

    E-Print Network [OSTI]

    Milano-Bicocca, Università

    , for economic investments, for prosperity and freedom. The Security theme contributes to the implementation , and to policy areas such as transport3 , health4 , civil protection5 , energy6 and environment7 . Through this national and international actors to co-operate and coordinate in order to avoid unnecessary duplication

  4. Public Works Transportation Infrastructure Study

    E-Print Network [OSTI]

    Minnesota, University of

    Public Works Transportation Infrastructure Study Minneapolis City of Lakes Minneapolis Public Works Transportation Infrastructure Study #12;Public Works Transportation Infrastructure Study Minneapolis City Works Transportation Infrastructure Study Minneapolis City of Lakes Background: · Currently, funding

  5. WORK PROGRAMME 2009 COOPERATION

    E-Print Network [OSTI]

    Milano-Bicocca, Universit

    _______ 15 SSH-2009 - 4.1.1. Competition and collaboration in access to oil, gas and mineral resourcesWORK PROGRAMME 2009 COOPERATION THEME 8 SOCIO-ECONOMIC SCIENCES AND HUMANITIES (European Commission and the Humanities Page 1 of 38 OBJECTIVE_______________________________________________________________ 3 I CONTEXT

  6. Moulinath Banerjee Work Address

    E-Print Network [OSTI]

    Banerjee, Moulinath

    .Stat.(Honors) 1995, in First Division with Distinction. Employment Associate Professor of Statistics, UniversityMoulinath Banerjee Work Address University of Michigan Department of Statistics 439, West Hall 1085 estimation, Statistical Methods in Astronomy, Biomedical studies and Epidemiology, Threshold and boundary

  7. Moulinath Banerjee Work Address

    E-Print Network [OSTI]

    Banerjee, Moulinath

    .Stat.(Honors) 1995, in First Division with Distinction. Employment Associate Professor of Statistics, University Methods in Non­standard Problems. Currently employed as Tenure-track Assistant Professor of StatisticsMoulinath Banerjee Work Address University of Michigan Department of Statistics 439, West Hall 1085

  8. Order 430.1D

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Management. 4. IMPLEMENTATION a. The requirements can be found in the document listed in Section 6 of this order. The Office of Institutional Operations through the Site...

  9. Optimal working conditions for thermoelectric generators with realistic thermal coupling

    E-Print Network [OSTI]

    Apertet, Y; Glavatskaya, O; Goupil, C; Lecoeur, P

    2011-01-01T23:59:59.000Z

    We study how maximum output power can be obtained from a thermoelectric generator(TEG) with nonideal heat exchangers. We demonstrate with an analytic approach based on a force-flux formalism that the sole improvement of the intrinsic characteristics of thermoelectric modules including the enhancement of the figure of merit is of limited interest: the constraints imposed by the working conditions of the TEG must be considered on the same footing. Introducing an effective thermal conductance we derive the conditions which permit maximization of both efficiency and power production of the TEG dissipatively coupled to heat reservoirs. Thermal impedance matching must be accounted for as well as electrical impedance matching in order to maximize the output power. Our calculations also show that the thermal impedance does not only depend on the thermal conductivity at zero electrical current: it also depends on the TEG figure of merit. Our analysis thus yields both electrical and thermal conditions permitting optima...

  10. Putting Dollars to Work

    E-Print Network [OSTI]

    Wythe, Kathy

    2006-01-01T23:59:59.000Z

    the extent to which bacteria are present. If these data demonstrate the need for an assessment of total maximum daily loads, experts in bacterial source tracking will help plan and imple- ment appropriate follow-up. Dairy Compost Utilization... This project addresses the elevated concentrations of ammonia, nitrogen, phosphorus and fecal bacteria found in parts of the North Bosque River, Upper North Bosque River and Leon River. Texas A&M agricultural scientists are working with composters...

  11. Location of laccase in ordered mesoporous materials

    SciTech Connect (OSTI)

    Mayoral, lvaro [Laboratorio de Microscopias Avanzadas, Instituto de Nanociencia de Aragon, Universidad de Zaragoza, Edificio I - D, Mariano Esquillor, 50018 Zaragoza (Spain); Gascn, Victoria; Blanco, Rosa M.; Mrquez-lvarez, Carlos; Daz, Isabel, E-mail: idiaz@icp.csic.es [Instituto de Catlisis y Petroleoqumica, CSIC, c/Marie Curie 2, 28049 Madrid (Spain)

    2014-11-01T23:59:59.000Z

    The functionalization with amine groups was developed on the SBA-15, and its effect in the laccase immobilization was compared with that of a Periodic Mesoporous Aminosilica. A method to encapsulate the laccase in situ has now been developed. In this work, spherical aberration (C{sub s}) corrected scanning transmission electron microscopy combined with high angle annular dark field detector and electron energy loss spectroscopy were applied to identify the exact location of the enzyme in the matrix formed by the ordered mesoporous solids.

  12. WORK PROGRAMME 2010 COOPERATION

    E-Print Network [OSTI]

    Milano-Bicocca, Università

    ------------------------ 18 Area 6.1.2.3 Methods and decision support tools for environmental health risk analysis and policy.1.1.1 The Earth System and Climate: Functioning and abrupt changes------------------------------- 12 Area 6 -------------------------------------------------------------------- 23 Area 6.2.1.2 Water resources

  13. WORKING PAPER Resource Economics

    E-Print Network [OSTI]

    -04 ­ Smoke and Mirrors: The Kyoto Protocol and Beyond (van Kooten) 2003-05 ­ Creating Carbon Offsets Offsets? A Meta-Analysis of Forest Carbon Sinks (van Kooten, Eagle, Manley and Smolak) 2004-02 ­ Managing-10 ­ Viability of Carbon Offset Generating Projects in Boreal Ontario (Biggs and Laaksonen- Craig) 2004

  14. HOW TO REPAIR A SECOND-ORDER SURFACE FOR COMPUTER

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    1 HOW TO REPAIR A SECOND-ORDER SURFACE FOR COMPUTER EXPERIMENTS BY KRIGING Astrid JOURDAN and analysis of computer experiments have been widely investigated in the past decade. Two approaches seem describes and compares them briefly in order to present a methodology for computer experiments based

  15. Chimera order in spin systems

    E-Print Network [OSTI]

    Rajeev Singh; Subinay Dasgupta; Sitabhra Sinha

    2010-11-23T23:59:59.000Z

    Homogeneous populations of oscillators have recently been shown to exhibit stable coexistence of coherent and incoherent regions. Generalizing the concept of chimera states to the context of order-disorder transition in systems at thermal equilibrium, we show analytically that such complex ordering can appear in a system of Ising spins, possibly the simplest physical system exhibiting this phenomenon. We also show numerically the existence of chimera ordering in 3-dimensional spin systems that model layered magnetic materials, suggesting possible means of experimentally observing such states.

  16. Hybrid High-Order Methods for Variable-Diffusion Problems on General Daniele A. Di Pietroa

    E-Print Network [OSTI]

    Boyer, Edmond

    ], the Virtual Element Method [5], the Mixed High-Order method [6], and the Hybrid High- Order (HHO) methods [7 work is to extend the HHO method of [7] to the variable-diffusion problem (1). The key idea

  17. INL's '@work' Scientific Glassblower

    SciTech Connect (OSTI)

    Lewis, Russel

    2008-01-01T23:59:59.000Z

    INL's '@work' segments feature INL employees and the jobs they perform. This edition features INL's Russell Lewis, a skilled glassblower. Learn more at http://www.facebook.com/idahonationallaboratory. Prepared by Battelle Energy Alliance, LLC under Contract NO.DE-AC07-05ID14517 with the U.S. Department of Energy. The United States Government retains a nonexclusive paid-up, irrevocable, world-wide license to publish or reproduce this video, or allow others to do so, for United States Government Purposes.

  18. Working Together | Jefferson Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear SecurityTensile Strain Switched FerromagnetismWaste and MaterialsWenjun1 Table 1.14 SalesWorkerWorkforce1:Working

  19. Fermilab at Work | Administration

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation ProposedUsing ZirconiaPolicyFeasibility ofSmall Works:OklahomaatWayne State University

  20. Trails Working Group

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear SecurityTensile Strain Switched Ferromagnetism in Layered NbS2Topo II: An EnzymePersonalTracking LivingTrailerWorking

  1. Work/Life Balance

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary)morphinanInformation Desert SouthwestTechnologies | Blandine Jerome Careers at WIPPCompletesWork/Life Balance

  2. Working with Us | EMSL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary)morphinanInformation Desert SouthwestTechnologies | Blandine Jerome Careers atWorking with Us Overview Proposal

  3. Amerikooler: Order (2013-CE-5307)

    Broader source: Energy.gov [DOE]

    DOE ordered Amerikooler, Inc. to pay a $8,000 civil penalty after finding Amerikooler had failed to certify that certain models of walk-in cooler and freezer components comply with the applicable energy conservation standards.

  4. Trastar: Order (2013-CE-49003)

    Broader source: Energy.gov [DOE]

    DOE ordered Trastar Inc. to pay a $8,000 civil penalty after finding Trastar had failed to certify that certain basic models of traffic signal modules and pedestrian modules comply with the applicable energy conservation standards.

  5. Keystone: Order (2013-CE-2601)

    Broader source: Energy.gov [DOE]

    DOE ordered Keystone Technologies, LLC to pay a $8,000 civil penalty after finding Keystone had failed to certify that certain models of fluorescent lamp ballasts comply with the applicable energy conservation standards.

  6. Trojan: Order (2011-CE-2704)

    Broader source: Energy.gov [DOE]

    DOE ordered Trojan, Inc. to pay a $6,000 civil penalty after finding Trojan had failed to certify that certain models of incandescent reflector lamps comply with the applicable energy conservation standards.

  7. Dacor: Order (2014-CE-23010)

    Broader source: Energy.gov [DOE]

    DOE ordered Dacor to pay a $8,000 civil penalty after finding Dacor had failed to certify that certain models of cooking products comply with the applicable energy conservation standards.

  8. Northland: Order (2014-CE-23002)

    Broader source: Energy.gov [DOE]

    DOE ordered Northland Corporation d/b/a AGA Marvel to pay a $16,000 civil penalty after finding Northland had failed to certify that certain models of cooking products comply with the applicable energy conservation standards.

  9. Executive Order 13514 Section 9 Recommendations: Federal Greenhouse Gas Accounting and Reporting

    Broader source: Energy.gov [DOE]

    Presentation covers the Executive Order 13514 Section 9 Recommentdations, and is given at the Spring 2010 Federal Utility Partnership Working Group (FUPWG) meeting in Providence, Rhode Island.

  10. Linking dopaminergic physiology to working memory related neural circuitry

    E-Print Network [OSTI]

    Bolton, Andrew D. (Andrew Donald)

    2014-01-01T23:59:59.000Z

    Working memory is the ability to hold information "online" over a delay in order to perform a task. This kind of memory is thought to be encoded in the brain by persistent neural activity that outlasts the presentation of ...

  11. National Poverty Center Working Paper Series June, 2006

    E-Print Network [OSTI]

    Shyy, Wei

    National Poverty Center Working Paper Series #0608 June, 2006 Justifying Inequality: A Social Psychological Analysis of Beliefs about Poverty and the Poor Heather Bullock, Department Poverty Center Working Paper Series index at: http://www.npc.umich.edu/publications/working_papers/ Any

  12. Working Group Report: Sensors

    SciTech Connect (OSTI)

    Artuso, M.; et al.,

    2013-10-18T23:59:59.000Z

    Sensors play a key role in detecting both charged particles and photons for all three frontiers in Particle Physics. The signals from an individual sensor that can be used include ionization deposited, phonons created, or light emitted from excitations of the material. The individual sensors are then typically arrayed for detection of individual particles or groups of particles. Mounting of new, ever higher performance experiments, often depend on advances in sensors in a range of performance characteristics. These performance metrics can include position resolution for passing particles, time resolution on particles impacting the sensor, and overall rate capabilities. In addition the feasible detector area and cost frequently provides a limit to what can be built and therefore is often another area where improvements are important. Finally, radiation tolerance is becoming a requirement in a broad array of devices. We present a status report on a broad category of sensors, including challenges for the future and work in progress to solve those challenges.

  13. How NIF Works

    SciTech Connect (OSTI)

    2009-07-30T23:59:59.000Z

    The National Ignition Facility, located at Lawrence Livermore National Laboratory, is the world's largest laser system... 192 huge laser beams in a massive building, all focused down at the last moment at a 2 millimeter ball containing frozen hydrogen gas. The goal is to achieve fusion... getting more energy out than was used to create it. It's never been done before under controlled conditions, just in nuclear weapons and in stars. We expect to do it within the next 2-3 years. The purpose is threefold: to create an almost limitless supply of safe, carbon-free, proliferation-free electricity; examine new regimes of astrophysics as well as basic science; and study the inner-workings of the U.S. stockpile of nuclear weapons to ensure they remain safe, secure and reliable without the need for underground testing. More information about NIF can be found at:

  14. How NIF Works

    ScienceCinema (OSTI)

    None

    2010-09-01T23:59:59.000Z

    The National Ignition Facility, located at Lawrence Livermore National Laboratory, is the world's largest laser system... 192 huge laser beams in a massive building, all focused down at the last moment at a 2 millimeter ball containing frozen hydrogen gas. The goal is to achieve fusion... getting more energy out than was used to create it. It's never been done before under controlled conditions, just in nuclear weapons and in stars. We expect to do it within the next 2-3 years. The purpose is threefold: to create an almost limitless supply of safe, carbon-free, proliferation-free electricity; examine new regimes of astrophysics as well as basic science; and study the inner-workings of the U.S. stockpile of nuclear weapons to ensure they remain safe, secure and reliable without the need for underground testing. More information about NIF can be found at:

  15. DECOMPOSITION OF MULTIVARIATE DATASETS WITH STRUCTURE/ORDERING

    E-Print Network [OSTI]

    analysis. However, contrary to Fourier decomposition these new variables are located in frequency as well as location (space, time, wavelength etc). 1 Introduction The maximum autocorrelation factor (MAF) analysisDECOMPOSITION OF MULTIVARIATE DATASETS WITH STRUCTURE/ORDERING OF OBSERVATIONS OR VARIABLES USING

  16. Predicting on-site environmental impacts of municipal engineering works

    SciTech Connect (OSTI)

    Gangolells, Marta, E-mail: marta.gangolells@upc.edu; Casals, Miquel, E-mail: miquel.casals@upc.edu; Forcada, Nria, E-mail: nuria.forcada@upc.edu; Macarulla, Marcel, E-mail: marcel.macarulla@upc.edu

    2014-01-15T23:59:59.000Z

    The research findings fill a gap in the body of knowledge by presenting an effective way to evaluate the significance of on-site environmental impacts of municipal engineering works prior to the construction stage. First, 42 on-site environmental impacts of municipal engineering works were identified by means of a process-oriented approach. Then, 46 indicators and their corresponding significance limits were determined on the basis of a statistical analysis of 25 new-build and remodelling municipal engineering projects. In order to ensure the objectivity of the assessment process, direct and indirect indicators were always based on quantitative data from the municipal engineering project documents. Finally, two case studies were analysed and found to illustrate the practical use of the proposed model. The model highlights the significant environmental impacts of a particular municipal engineering project prior to the construction stage. Consequently, preventive actions can be planned and implemented during on-site activities. The results of the model also allow a comparison of proposed municipal engineering projects and alternatives with respect to the overall on-site environmental impact and the absolute importance of a particular environmental aspect. These findings are useful within the framework of the environmental impact assessment process, as they help to improve the identification and evaluation of on-site environmental aspects of municipal engineering works. The findings may also be of use to construction companies that are willing to implement an environmental management system or simply wish to improve on-site environmental performance in municipal engineering projects. -- Highlights: We present a model to predict the environmental impacts of municipal engineering works. It highlights significant on-site environmental impacts prior to the construction stage. Findings are useful within the environmental impact assessment process. They also help contractors to implement environmental management systems.

  17. Exascale Hardware Architectures Working Group

    SciTech Connect (OSTI)

    Hemmert, S; Ang, J; Chiang, P; Carnes, B; Doerfler, D; Leininger, M; Dosanjh, S; Fields, P; Koch, K; Laros, J; Noe, J; Quinn, T; Torrellas, J; Vetter, J; Wampler, C; White, A

    2011-03-15T23:59:59.000Z

    The ASC Exascale Hardware Architecture working group is challenged to provide input on the following areas impacting the future use and usability of potential exascale computer systems: processor, memory, and interconnect architectures, as well as the power and resilience of these systems. Going forward, there are many challenging issues that will need to be addressed. First, power constraints in processor technologies will lead to steady increases in parallelism within a socket. Additionally, all cores may not be fully independent nor fully general purpose. Second, there is a clear trend toward less balanced machines, in terms of compute capability compared to memory and interconnect performance. In order to mitigate the memory issues, memory technologies will introduce 3D stacking, eventually moving on-socket and likely on-die, providing greatly increased bandwidth but unfortunately also likely providing smaller memory capacity per core. Off-socket memory, possibly in the form of non-volatile memory, will create a complex memory hierarchy. Third, communication energy will dominate the energy required to compute, such that interconnect power and bandwidth will have a significant impact. All of the above changes are driven by the need for greatly increased energy efficiency, as current technology will prove unsuitable for exascale, due to unsustainable power requirements of such a system. These changes will have the most significant impact on programming models and algorithms, but they will be felt across all layers of the machine. There is clear need to engage all ASC working groups in planning for how to deal with technological changes of this magnitude. The primary function of the Hardware Architecture Working Group is to facilitate codesign with hardware vendors to ensure future exascale platforms are capable of efficiently supporting the ASC applications, which in turn need to meet the mission needs of the NNSA Stockpile Stewardship Program. This issue is relatively immediate, as there is only a small window of opportunity to influence hardware design for 2018 machines. Given the short timeline a firm co-design methodology with vendors is of prime importance.

  18. A computational biologically-plausible model of working memory for serial order, repetition and binding

    E-Print Network [OSTI]

    Xie, Danke

    2009-01-01T23:59:59.000Z

    J. A. , Choe, Y. , & Sirosh, J. (2005). Computational mapsMiikkulainen, Bednar, Choe, & Sirosh, To e?ciently test for

  19. Personal Property Retirement Work Order, HQ Form 1400.20 | Department of

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of Energy Power.pdf11-161-LNG |September 15, 2010Energy6 Frontera STAT.Paul L.3 AgencyEnergy Personal

  20. Policy Flash 2014-30 DOE Order 412.1a, Work Authorization System

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of Energy Power.pdf11-161-LNG |September 15, 2010Energy6 FronteraMarijuanaand(EPEAT)

  1. Aerial Work Platform Safety Program

    E-Print Network [OSTI]

    Holland, Jeffrey

    Aerial Work Platform Safety Program Updated: July 22, 2013 #12;Aerial Work Platform Safety Program ..........................................................................................................11 #12;Aerial Work Platform Safety Program 1 The official version of this information will only for establishing and maintaining the Aerial Work Platform Safety Program. Appropriate safety equipment (e

  2. High Temperature Membrane Working Group

    Broader source: Energy.gov [DOE]

    This presentation provides an overview of the High Temperature Membrane Working Group Meeting in May 2007.

  3. Video Shoot Scope of Work

    Broader source: Energy.gov [DOE]

    Video Shoot Scope of Work, from the Tool Kit Framework: Small Town University Energy Program (STEP).

  4. Work Experience Guidance for Managers

    E-Print Network [OSTI]

    Work Experience Guidance for Managers When approached with a request for work experience, managers. Any queries regarding CRB checks should be directed to your designated HR Manager. When a work any work, paid or unpaid: Before 7am or after 7pm For more than two hours on a school day or Sunday

  5. Will NIF Work

    E-Print Network [OSTI]

    Nellis, W J

    2009-01-01T23:59:59.000Z

    It is vital that new clean and abundant sources of energy be developed for the sustainability of modern society. Nuclear fusion of the hydrogen isotopes deuterium and tritium, if successful, might make a major contribution toward satisfying this need. The U.S. has an important effort aimed at achieving practical inertial confinement fusion, ICF, which has been under development for decades at the Lawrence Livermore National Laboratory. The National Ignition Facility (NIF) is a giant laser to multiply-shock and thus quasi-isentropically compress a capsule of deuterium-tritium (DT) to high density and temperature, where the fusion rate is proportional to density squared times temperature to the fourth power. The principal problem that must be solved for NIF to work successfully is elimination of the Rayleigh-Tailor (R-T) instability that originates from the interface between the solid shell and the DT fuel within it. The R-T instability poisons the fusion reaction by reducing the temperature of the DT achieved ...

  6. Low work function thermionic emission materials

    SciTech Connect (OSTI)

    Zavadil, K.R.; King, D.B.; Ruffner, J.A.

    1999-11-01T23:59:59.000Z

    Thermionic energy conversion in a microminiature format shows potential as a viable, high efficiency, on-chip power source. Microminiature thermionic converters (MTC) with inter-electrode spacings on the order of microns are currently being prototyped and evaluated at Sandia. The remaining enabling technology is the development of low work function materials and processes than can be integrated into these converters. In this report, the authors demonstrate a method of incorporating thin film emitters into converters using rf sputtering. They find that the resultant films possess a minimum work function of 1.2 eV. Practical energy conversion is hindered by surface work function non-uniformity. They postulate the source of this heterogeneity to be a result of limited bulk and surface transport of barium. Several methods are proposed for maximizing transport, including increased film porosity and the use of metal terminating layers. They demonstrate a novel method for incorporating film porosity based on metal interlayer coalescence.

  7. Octupolar order in two dimensions

    E-Print Network [OSTI]

    Epifanio G. Virga

    2015-03-16T23:59:59.000Z

    Octupolar order is described in two space dimensions in terms of the maxima (and conjugated minima) of the probability density associated with a third-rank, fully symmetric and traceless tensor. Such a representation is shown to be equivalent to diagonalizing the relevant third-rank tensor, an equivalence which however is only valid in the two-dimensional case.

  8. Executive Order 1083 Attachment C

    E-Print Network [OSTI]

    de Lijser, Peter

    Rev 2/2013 Executive Order 1083 Attachment C California Child Abuse and Neglect Reporting Act Penal, an administrator, or an employee of a licensed community care or child day care facility. (11) A Head Start program in Section 11165.11. (13) A public assistance worker. (14) An employee of a child care institution, including

  9. Executive Order 1083 Attachment C

    E-Print Network [OSTI]

    Eirinaki, Magdalini

    Executive Order 1083 Attachment C California Child Abuse and Neglect Reporting Act Penal Code, an administrator, or an employee of a licensed community care or child day care facility. (11) A Head Start program in Section 11165.11. (13) A public assistance worker. (14) An employee of a child care institution, including

  10. Versonel: Order (2014-CE-21009)

    Broader source: Energy.gov [DOE]

    DOE ordered Smart Surplus, Inc. d/b/a Versonel to pay a $8,000 civil penalty after finding Versonel had failed to certify that certain models of refrigerators and residential clothes dryers comply with the applicable energy conservation standards.

  11. High order beam features and fitting quadrupole scan data to particle code model.

    SciTech Connect (OSTI)

    Lysenko, W. P. (Walter P.); Garnett, R. W. (Robert W.); Gilpatrick, J. D. (John Douglas); Qiang, J. (Ji); Rybarcyk, L. J. (Lawrence J.); Ryne, Robert; Schneider, J. D. (J. David); Smith, H. V. (Horace V.); Young, L. M. (Lloyd M.); Schulze, M. E. (Martin E.)

    2003-01-01T23:59:59.000Z

    Quadrupole scans in the HEBT of the 6.7 MeV LEDA RFQ were analyzed to characterize the RFQ output beam. In previous work, profiles measured by the wire scanner were fit to models (beam parameterizations and HEBT simulations) to determine the transverse Courant-Snyder parameters {alpha}, {beta}, and {epsilon} at the RFQ exit. Unfortunately, at the larger quadrupole settings, the measured profiles showed features that were not present in any of our simulations. Here we describe our latest analysis, which resulted in very good fits by using an improved model for the RFQ output beam. The model beam was generated by the RFQ simulation code TOUTATIS. In our fitting code, this beam was distorted by linear transformations that changed the Courant-Snyder parameters to whatever values were required by the nonlinear optimizer while preserving the high-order features of the phase-space distribution. No new physics in the HEBT was required to explain our quad-scan results, just an improved initial beam. High-order features in the RFQ output beam apparently make a significant difference in behavior downstream of the RFQ. While this result gives us increased confidence in our codes, we still have a mystery: exactly what high-order features in the beam are responsible for the the strange behavior downstream. Understanding this phenomenon may be helpful to understanding our halo-experiment data. We have begun to study this by comparing higher-order moments of the TOUTATIS distribution with other distributions.

  12. Atomic Ordering Enhanced Electrocatalytic Activity of Nanoalloys...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Ordering Enhanced Electrocatalytic Activity of Nanoalloys for Oxygen Reduction Reaction. Atomic Ordering Enhanced Electrocatalytic Activity of Nanoalloys for Oxygen Reduction...

  13. Perturbative Gadgets at Arbitrary Orders

    E-Print Network [OSTI]

    Stephen P. Jordan; Edward Farhi

    2012-01-31T23:59:59.000Z

    Adiabatic quantum algorithms are often most easily formulated using many-body interactions. However, experimentally available interactions are generally two-body. In 2004, Kempe, Kitaev, and Regev introduced perturbative gadgets, by which arbitrary three-body effective interactions can be obtained using Hamiltonians consisting only of two-body interactions. These three-body effective interactions arise from the third order in perturbation theory. Since their introduction, perturbative gadgets have become a standard tool in the theory of quantum computation. Here we construct generalized gadgets so that one can directly obtain arbitrary k-body effective interactions from two-body Hamiltonians. These effective interactions arise from the kth order in perturbation theory.

  14. DOE Order on Quality Assurance

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Deliciouscritical_materials_workshop_presentations.pdf MoreProgram |DOEInfrastructure Working420.1B FACILITY

  15. Flexible Work Arrangements Manager Guidelines

    E-Print Network [OSTI]

    Jones, Michelle

    Flexible Work Arrangements Manager Guidelines The Ohio State University Office of Human Resources Page 1 of 2 Flexible Work Arrangement ­ Manager Assessment Issued 07/15/10 When you receive a proposal your manager to review for a decision. Remember that granting a flexible work arrangement may help

  16. Water Resources Working Group Report

    E-Print Network [OSTI]

    Sheridan, Jennifer

    Water Resources Working Group Report This report provided content for the Wisconsin Initiative in February 2011. #12;Water Resources Working Group Wisconsin Initiative on Climate Change Impacts October 2010 #12;Water Resources Working Group Members ­ WICCI Tim Asplund (Co-Chair) - Wisconsin Department

  17. Public Order and Safety Buildings

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec 2007 10,998 9,933 10,998 10,643 10,998throughThousand CubicWashington Natural Gas Exports2. TypesOrder and

  18. ORDER FOR SUPPLIES OR SERVICES

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the ContributionsArms Control R&DNuclear fuelOPTICS FOR A PHOTOINJECTEDthe YearORDER2

  19. arXiv:1003.5447v2[cs.LO]14May2010 Relating Nominal and Higher-order

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    , nominal logic, higher-order abstract syn- tax This work has been supported by INRIA through the "Equipes]. Formalizing speci- fication based on higher-order abstract syntax requires a frame- work with devicesarXiv:1003.5447v2[cs.LO]14May2010 Relating Nominal and Higher-order Abstract Syntax Specifications

  20. Nuclear World Order and Nonproliferation

    SciTech Connect (OSTI)

    Joeck, N

    2007-02-05T23:59:59.000Z

    The decision by India and Pakistan in May 1998 to conduct nuclear weapon tests and declare themselves as nuclear weapon states challenged South Asian regional stability calculations, US nonproliferation policy, and prevailing assumptions about international security. A decade later, the effects of those tests are still being felt and policies are still adjusting to the changed global conditions. This paper will consider non- and counter-proliferation policy options for the United States and Pakistan as they work as partners to prevent the transfer of nuclear technology and further nuclear proliferation.

  1. Project Work | Tobias Berger | July 2006Page 1 Project Work

    E-Print Network [OSTI]

    ........................................................................................ 6 1.1.3 Working on the Brand Image ................................................................................................... 6 1.1 Brand Communication in International Collaboration at the Vattenfall Group

  2. QCD as a topologically ordered system

    SciTech Connect (OSTI)

    Zhitnitsky, Ariel R., E-mail: arz@physics.ubc.ca

    2013-09-15T23:59:59.000Z

    We argue that QCD belongs to a topologically ordered phase similar to many well-known condensed matter systems with a gap such as topological insulators or superconductors. Our arguments are based on an analysis of the so-called deformed QCD which is a weakly coupled gauge theory, but nevertheless preserves all the crucial elements of strongly interacting QCD, including confinement, nontrivial ? dependence, degeneracy of the topological sectors, etc. Specifically, we construct the so-called topological BF action which reproduces the well known infrared features of the theory such as non-dispersive contribution to the topological susceptibility which cannot be associated with any propagating degrees of freedom. Furthermore, we interpret the well known resolution of the celebrated U(1){sub A} problem where the would be ?{sup ?} Goldstone boson generates its mass as a result of mixing of the Goldstone field with a topological auxiliary field characterizing the system. We then identify the non-propagating auxiliary topological field of the BF formulation in deformed QCD with the Veneziano ghost (which plays the crucial role in resolution of the U(1){sub A} problem). Finally, we elaborate on relation between string-net condensation in topologically ordered condensed matter systems and long range coherent configurations, the skeletons, studied in QCD lattice simulations. -- Highlights: QCD may belong to a topologically ordered phase similar to condensed matter (CM) systems. We identify the non-propagating topological field in deformed QCD with the Veneziano ghost. Relation between string-net condensates in CM systems and the skeletons in QCD lattice simulations is studied.

  3. Code for prompt numerical computation of the leading order GPD evolution

    E-Print Network [OSTI]

    A. V. Vinnikov

    2006-04-27T23:59:59.000Z

    This paper describes the design and work of a set of computer routines capable for numerical computation of generalized parton distributions (GPDs) evolution at the leading order. The main intention of this work is to present a fast-working computer code making possible fitting of GPDs parameters to the data on hard electron-nucleon scattering.

  4. Healthy Housing Opportunities During Weatherization Work

    SciTech Connect (OSTI)

    Wilson, J.; Tohn, E.

    2011-03-01T23:59:59.000Z

    In the summer and early fall of 2010, the National Center for Healthy Housing interviewed people from a selection of state and local agencies that perform weatherizations on low-income housing in order to gauge their approach to improving the health and safety of the homes. The interviews provided a strong cross section of what work agencies can do, and how they go about funding this work when funds from the Weatherization Assistance Program (WAP) do not cover the full extent of the repairs. The report also makes recommendations for WAP in how to assist agencies to streamline and maximize the health and safety repairs they are able to make in the course of a standard weatherization.

  5. REBUILD AMERICA PROGRAM SCOPE OF WORK

    SciTech Connect (OSTI)

    Jeffrey Brown; Bruce Exstrum

    2004-12-01T23:59:59.000Z

    This report summarizes the activities carried out by Aspen Systems Corporation in support of the Department of Energy's Rebuild America program during the period from October 9, 1999 to October 31, 2004. These activities were in accordance with the Scope of Work contained in a GSA MOBIS schedule task order issued by the National Energy Technology Laboratory. This report includes descriptions of activities and results in the following areas: deployment/delivery model; program and project results; program representative support activities; technical assistance; web site development and operation; business/strategic partners; and training/workshop activities. The report includes conclusions and recommendations. Five source documents are also provided as appendices.

  6. Recent advances in ordered intermetallics

    SciTech Connect (OSTI)

    Liu, C.T.

    1992-12-31T23:59:59.000Z

    This paper briefly summarizes recent advances in intermetallic research and development. Ordered intermetallics based on aluminides and silicides possess attractive properties for structural applications at elevated temperatures in hostile environments; however, brittle fracture and poor fracture resistance limit their use as engineering materials in many cases. In recent years, considerable efforts have been devoted to the study of the brittle fracture behavior of intermetallic alloys; as a result, both intrinsic and extrinsic factors governing brittle fracture have been identified. Recent advances in first-principles calculations and atomistic simulations further help us in understanding atomic bonding, dislocation configuration, and alloying effects in intermetallics. The basic understanding has led to the development of nickel, iron, and titanium aluminide alloys with improved mechanical and metallurgical properties for structural use. Industrial interest in ductile intermetallic alloys is high, and several examples of industrial involvement are mentioned.

  7. Fast high-order variation-aware IC interconnect analysis

    E-Print Network [OSTI]

    Ye, Xiaoji

    2009-05-15T23:59:59.000Z

    Interconnects constitute a dominant source of circuit delay for modern chip designs. The variations of critical dimensions in modern VLSI technologies lead to variability in interconnect performance that must be fully accounted for in timing...

  8. The Complexity of Flow Analysis in Higher-Order Languages

    E-Print Network [OSTI]

    Strickland, Stevie

    Smaragdakis. Thomas Reps. Assaf Kfoury. Jef- frey Mark Siskind. David Foster Wallace. Timothy J. Hickey. Myrna

  9. Solution Analysis for the Pseudomonotone Second-order Cone ...

    E-Print Network [OSTI]

    2014-11-17T23:59:59.000Z

    Nov 17, 2014 ... tz) ? r y for all t > 0 and all y ? C. Letting t ? 0 gives r b ? r y, ...... from which it is not difficult to see u g ? 0 for all g ? Kn and thereby u ? Kn.

  10. Notes from the Margin Higher Order Fourier Analysis

    E-Print Network [OSTI]

    de Leon, Alex R.

    integration. Like any sport, math requires hands-on practice. You cannot be competitive if you have only it through a single chicane. Doing the drills, training, conditioning, exerting yourself to push your limits personal best. Skills have to be built up, not "watched" up. Moreover, simply watching someone solve

  11. ICDF Complex Remedial Action Work Plan

    SciTech Connect (OSTI)

    W. M. Heileson

    2006-12-01T23:59:59.000Z

    This Remedial Action Work Plan provides the framework for operation of the Idaho Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) Disposal Facility Complex (ICDF). This facility includes (a) an engineered landfill that meets the substantial requirements of DOE Order 435.1, Resource Conservation and Recovery Act Subtitle C, Idaho Hazardous Waste Management Act, and Toxic Substances Control Act polychlorinated biphenyl landfill requirements; (b) centralized receiving, inspections, administration, storage/staging, and treatment facilities necessary for CERCLA investigation-derived, remedial, and removal waste at the Idaho National Laboratory (INL) prior to final disposition in the disposal facility or shipment off-Site; and (c) an evaporation pond that has been designated as a corrective action management unit. The ICDF Complex, including a buffer zone, will cover approximately 40 acres, with a landfill disposal capacity of approximately 510,000 yd3. The ICDF Complex is designed and authorized to accept INL CERCLA-generated wastes, and includes the necessary subsystems and support facilities to provide a complete waste management system. This Remedial Action Work Plan presents the operational approach and requirements for the various components that are part of the ICDF Complex. Summaries of the remedial action work elements are presented herein, with supporting information and documents provided as appendixes to this work plan that contain specific detail about the operation of the ICDF Complex. This document presents the planned operational process based upon an evaluation of the remedial action requirements set forth in the Operable Unit 3-13 Final Record of Decision.

  12. Finite temperature topological order in 2D topological color codes

    E-Print Network [OSTI]

    Mehdi Kargarian

    2009-07-19T23:59:59.000Z

    In this work the topological order at finite temperature in two-dimensional color code is studied. The topological entropy is used to measure the behavior of the topological order. Topological order in color code arises from the colored string-net structures. By imposing the hard constrained limit the exact solution of the entanglement entropy becomes possible. For finite size systems, by raising the temperature, one type of string-net structure is thermalized and the associative topological entropy vanishes. In the thermodynamic limit the underlying topological order is fragile even at very low temperatures. Taking first the thermodynamic limit and then the zero-temperature limit and vice versa does not commute, and their difference is related only to the topology of regions. The contribution of the colors and symmetry of the model in the topological entropy is also discussed. It is shown how the gauge symmetry of the color code underlies the topological entropy.

  13. Work For Others (Non-Department of Energy Funded Work)

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2001-09-28T23:59:59.000Z

    Work for Others (WFO) is the performance of work for non-Department of Energy (DOE) entities by DOE/National Nuclear Security Administration (NNSA) and/or their respective contractor personnel or the use of DOE/NNSA facilities that is not directly funded by DOE appropriations. Cancels DOE O 481.1A.

  14. Social Work and Women's Studies Social work engages with individuals,

    E-Print Network [OSTI]

    and Women's Studies can lead to careers in child and youth protection services, women's shelters, sexualSocial Work and Women's Studies Social work engages with individuals, families, communities a positive difference in the lives of others. In your fourth year, you will apply what you have learned

  15. Work For Others (Non-Department of Energy Funded Work)

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2001-01-03T23:59:59.000Z

    Work for Others (WFO) is the performance of work for non-Department of Energy (DOE) entities by DOE/National Nuclear Security Administration (NNSA) and/or their respective contractor personnel or the use of DOE/NNSA facilities that is not directly funded by DOE appropriations. WFO has the following objectives. Cancels DOE O 481.1.

  16. International Refrigeration: Order (2012-CE-1510) | Department...

    Broader source: Energy.gov (indexed) [DOE]

    Refrigeration: Order (2012-CE-1510) July 20, 2012 DOE ordered International Refrigeration Products to pay an 8,000 civil penalty after finding International Refrigeration had...

  17. Executive Order 13423: Strengthening Federal Environmental, Energy...

    Broader source: Energy.gov (indexed) [DOE]

    text of Executive Order 13423: Strengthening Federal Environmental, Energy, and Transportation Management. eo13423.pdf More Documents & Publications Executive Order 13423-...

  18. these pages are in correct order

    E-Print Network [OSTI]

    We ?rst list in alphabetical order 10 judg- ... We make angle judgments when we read a pie chart, but we ..... data range over several orders of magnitude.

  19. Coping with Hot Work Environments

    E-Print Network [OSTI]

    Smith, David

    2005-04-28T23:59:59.000Z

    exposed to these conditions. A hot work environment can impair safety and health. Both workers and their employers are responsi- ble for taking steps to prevent heat stress in the work- place. How Your Body Handles Heat Humans are warm-blooded, which... evaporation. Wiping sweat from the skin with a cloth also prevents cooling from evaporation. In hot, humid conditions, hard work becomes harder. The sweat glands release moisture and essential David W. Smith, Extension Safety Program The Texas A...

  20. Transportation External Coordination Working Group:

    Broader source: Energy.gov (indexed) [DOE]

    External Coordination Working Group: Background and Process Judith Holm National Transportation Program Albuquerque, New Mexico April 21, 2004 TEC History * DOE's Office of...

  1. INL @ work: Nuclear Reactor Operator

    ScienceCinema (OSTI)

    Russell, Patty

    2013-05-28T23:59:59.000Z

    INL @ work features jobs at the Idaho National Laboratory. Learn more about careers and energy research at INL's facebook site http://www.facebook.com/idahonationallaboratory

  2. Radiation Safety Work Control Form

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Radiation Safety Work Control Form (see instructions on pg-3) Rev. May 2014 Area: Form : Date: Preliminary Applicability Screen: (a) Will closing the beam line injection stoppers...

  3. Interagency Sustainability Working Group Members

    Broader source: Energy.gov [DOE]

    Chaired by the Federal Energy Management Program, the Interagency Sustainability Working Group is composed of representatives from every major Federal agency.

  4. INL @ work: Nuclear Reactor Operator

    SciTech Connect (OSTI)

    Russell, Patty

    2008-01-01T23:59:59.000Z

    INL @ work features jobs at the Idaho National Laboratory. Learn more about careers and energy research at INL's facebook site http://www.facebook.com/idahonationallaboratory

  5. Infrared Thermography (IRT) Working Group

    Broader source: Energy.gov (indexed) [DOE]

    Infrared Thermography (IRT) Working Group Sco McWilliams U.S. Photovoltaic Manufacturing Consor;um (PVMC) Infrared Thermography Infrared Thermography (IRT) has been demonstrated...

  6. Construction Work in Progress (Kansas)

    Broader source: Energy.gov [DOE]

    This Act allows nuclear power plants to qualify for recovery of Construction Work in Progress (CWIP) and other preconstruction expenditures in rates. Previously, nuclear power plants were excluded...

  7. work

    Broader source: Energy.gov (indexed) [DOE]

    to 9,500 after the first quarter of this year through a reduction in the support service contract. Fund management followed administrative controls that met the expectations...

  8. CERNA WORKING PAPER SERIES Strategic inputs into patent pools

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    1 CERNA WORKING PAPER SERIES Strategic inputs into patent pools Justus Baron Henry Delcamp Working;2 Strategic inputs into patent pools1 Justus BARON2 Henry DELCAMP3 Abstract: This article explores what factors determine the decision of a patent pool to accept new inputs. We propose a dynamic analysis

  9. Rice University HOT WORK PERMIT

    E-Print Network [OSTI]

    Natelson, Douglas

    been taken to prevent fire, and permission is authorized for this work. SIGNED (Project Manager of automatic fire detection systems Requirements within 35 ft. (11m.) of work Flammable liquids, dust, lint and oily deposits removed. Explosive atmosphere in area eliminated. Floors swept clean. Combustible

  10. FY 1987 current fiscal year work plan

    SciTech Connect (OSTI)

    Not Available

    1986-12-01T23:59:59.000Z

    This Current Year Work Plan presents a detailed description of the activities to be performed by the Joint Integration Office during FY87. It breaks down the activities into two major work areas: Program Management and Program Analysis. Program Management is performed by the JIO by providing technical planning and guidance for the development of advanced TRU waste management capabilities. This includes equipment/facility design, engineering, construction, and operations. These functions are integrated to allow transition from interim storage to final disposition. JIO tasks include program requirements identification, long-range technical planning, budget development, program planning document preparation, task guidance, task monitoring, information gathering and task reporting to DOE, interfacing with other agencies and DOE lead programs, integrating public involvement with program efforts, and preparation of program status reports for DOE. Program Analysis is performed by the JIO to support identification and assessment of alternatives, and development of long-term TRU waste program capabilities. This work plan includes: system analyses, requirements analyses, interim and procedure development, legislative and regulatory analyses, dispatch and traffic analyses, and data bases.

  11. Radiological Work Planning and Procedures

    E-Print Network [OSTI]

    Kurtz, J E

    2000-01-01T23:59:59.000Z

    Each facility is tasked with maintaining personnel radiation exposure as low as reasonably achievable (ALARA). A continued effort is required to meet this goal by developing and implementing improvements to technical work documents (TWDs) and work performance. A review of selected TWDs from most facilities shows there is a need to incorporate more radiological control requirements into the TWD. The Radioactive Work Permit (RWP) provides a mechanism to place some of the requirements but does not provide all the information needed by the worker as he/she is accomplishing the steps of the TWD. Requiring the engineers, planners and procedure writers to put the radiological control requirements in the work steps would be very easy if all personnel had a strong background in radiological work planning and radiological controls. Unfortunately, many of these personnel do not have the background necessary to include these requirements without assistance by the Radiological Control organization at each facility. In add...

  12. B Plant Complex preclosure work plan

    SciTech Connect (OSTI)

    ADLER, J.G.

    1999-02-02T23:59:59.000Z

    This preclosure work plan describes the condition of the dangerous waste treatment storage, and/or disposal (TSD) unit after completion of the B Plant Complex decommissioning Transition Phase preclosure activities. This description includes waste characteristics, waste types, locations, and associated hazards. The goal to be met by the Transition Phase preclosure activities is to place the TSD unit into a safe and environmentally secure condition for the long-term Surveillance and Maintenance (S&M) Phase of the facility decommissioning process. This preclosure work plan has been prepared in accordance with Section 8.0 of the Hanford Federal Facility Agreement and Consent Order (Tri-Party Agreement) (Ecology et al. 1996). The preclosure work plan is one of three critical Transition Phase documents, the other two being: B Plant End Points Document (WHC-SD-WM-TPP-054) and B Plant S&M plan. These documents are prepared by the U.S. Department of Energy, Richland Operations Office (DOE-RL) and its contractors with the involvement of Washington State Department of Ecology (Ecology). The tanks and vessels addressed by this preclosure work plan are limited to those tanks end vessels included on the B Plant Complex Part A, Form 3, Permit Application (DOE/RL-88-21). The criteria for determining which tanks or vessels are in the Part A, Form 3, are discussed in the following. The closure plan for the TSD unit will not be prepared until the Disposition Phase of the facility decommissioning process is initiated, which follows the long-term S&M Phase. Final closure will occur during the Disposition Phase of the facility decommissioning process. The Waste Encapsulation Storage Facility (WESF) is excluded from the scope of this preclosure work plan.

  13. Work for Others (Non-Department of Energy Funded Work)

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2005-01-24T23:59:59.000Z

    Work for Others is the performance of work for non-Department of Energy (DOE) entities by DOE/National Nuclear Security Administration (NNSA) and/or their respective contractor personnel or the use of DOE/NNSA facilities that is not directly funded by DOE appropriations. Cancels DOE O 481.1B. Certified 1-13-11. Admin Chg 1, dated 3-14-11, cancels DOE O 481.1C.

  14. Work for Others (Non-Department of Energy Funded Work)

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2005-01-24T23:59:59.000Z

    Work for Others is the performance of work for non-Department of Energy (DOE) entities by DOE/National Nuclear Security Administration (NNSA) and/or their respective contractor personnel or the use of DOE/NNSA facilities that is not directly funded by DOE appropriations. Cancels DOE O 481.1B. Certified 1-13-11. Admin Chg 1, dated 3-14-11.

  15. Electromagnetic field at Finite Temperature: A first order approach

    E-Print Network [OSTI]

    R. Casana; B. M. Pimentel; J. S. Valverde

    2007-02-04T23:59:59.000Z

    In this work we study the electromagnetic field at Finite Temperature via the massless DKP formalism. The constraint analysis is performed and the partition function for the theory is constructed and computed. When it is specialized to the spin 1 sector we obtain the well-known result for the thermodynamic equilibrium of the electromagnetic field.

  16. Impact of jumps on returns and realised variances: econometric analysis of time-deformed Levy processes

    E-Print Network [OSTI]

    Wolfe, Patrick J.

    Impact of jumps on returns and realised variances: econometric analysis of time-deformed L In order to assess the effect of jumps on realised variance calculations, we study some of the econometric econometric work on realised variance. Keywords: Kalman filter, Levy process, Long-memory, Quasi

  17. FY 1994 Annual Work Plan

    SciTech Connect (OSTI)

    Not Available

    1993-09-30T23:59:59.000Z

    In accordance with the Inspector General`s Strategic Planning Policy directive, the Office of Inspector General (OIG) annually updates its Strategic Plan with budgetary and program guidance for the next fiscal year. The program guidance identifies and establishes priorities for OIG coverage of important DOE issues and operations, provides the basis for assigning OIG resources, and is the source for issues covered in Assistant Inspectors General annual work plans. The Office of the Assistant Inspector General for Audits (AIGA) publishes an Annual Work Plan in September of each year. The plan includes the OIG program guidance and shows the commitment of resources necessary to accomplish the assigned work and meet our goals. The program guidance provides the framework within which the AIGA work will be planned and accomplished. Audits included in this plan are designed to help insure that the requirements of our stakeholders have been considered and blended into a well balanced audit program.

  18. Recovery Act Funds at Work

    Broader source: Energy.gov [DOE]

    Funds from the American Recovery and Reinvestment Act of 2009 (Recovery Act) are being put to work to improve safety, reliability, and service in systems across the country. Here are case studies from a variety of Recovery Act programs.

  19. Utility Security & Resiliency: Working Together

    Broader source: Energy.gov [DOE]

    Presentationgiven at the Federal Utility Partnership Working Group (FUPWG) Fall 2008 meetingdiscusses Edison Electric Institute (EEI), including its key security objectives, key activities, cybersecurity activities, and spare transformer equipment program (STEP).

  20. Categorical Exclusion for Maintenance Work

    Broader source: Energy.gov (indexed) [DOE]

    Maintenance Work along the Electrical District 5 to Saguaro segment (414 to 585) of the Maricopa-Saguaro 115-kV Transmission Line, between Friendly Comers and Marana, Pinal...

  1. Appendix A - Statement of Work

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ATTACHMENT 1 to NREL RFP No. RXL-4-42172 APPENDIX A STATEMENT OF WORK "U.S. Department of Energy Solar Decathlon 2015 Construction Cost Estimates" 071614 1.0 BACKGROUND The U.S....

  2. CSREES Nutrient Management Working Meeting

    E-Print Network [OSTI]

    planning process Nutrient management training P-Indexes and tools developed Educational materials #12Welcome CSREES Nutrient Management Working Meeting May 4 and 5, 2004 Atlanta, GA #12;University Objectives Information Sharing Among States Nutrient management regulations Nutrient management

  3. Working with CFTF | ornl.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered energy consumption byAbout PrintableBlenderWhatFellowsWoodAnalysisCFTF Working with

  4. Working with MDF | ornl.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered energy consumption byAbout PrintableBlenderWhatFellowsWoodAnalysisCFTF Working

  5. K-inflationary power spectra at second order

    SciTech Connect (OSTI)

    Martin, Jrme; Vennin, Vincent [Institut d'Astrophysique de Paris, UMR 7095-CNRS, Universit Pierre et Marie Curie, 98bis boulevard Arago, 75014 Paris (France); Ringeval, Christophe, E-mail: jmartin@iap.fr, E-mail: christophe.ringeval@uclouvain.be, E-mail: vennin@iap.fr [Centre for Cosmology, Particle Physics and Phenomenology, Institute of Mathematics and Physics, Louvain University, 2 Chemin du Cyclotron, 1348 Louvain-la-Neuve (Belgium)

    2013-06-01T23:59:59.000Z

    Within the class of inflationary models, k-inflation represents the most general single field framework that can be associated with an effective quadratic action for the curvature perturbations and a varying speed of sound. The incoming flow of high-precision cosmological data, such as those from the Planck satellite and small scale Cosmic Microwave Background (CMB) experiments, calls for greater accuracy in the inflationary predictions. In this work, we calculate for the first time the next-to-next-to-leading order scalar and tensor primordial power spectra in k-inflation needed in order to obtain robust constraints on the inflationary theory. The method used is the uniform approximation together with a second order expansion in the Hubble and sound flow functions. Our result is checked in various limits in which it reduces to already known situations.

  6. Generalized structure of higher order nonclassicality

    E-Print Network [OSTI]

    Amit Verma; Anirban Pathak

    2009-01-21T23:59:59.000Z

    A generalized notion of higher order nonclassicality (in terms of higher order moments) is introduced. Under this generalized framework of higher order nonclassicality, conditions of higher order squeezing and higher order subpoissonian photon statistics are derived. A simpler form of the Hong-Mandel higher order squeezing criterion is derived under this framework by using an operator ordering theorem introduced by us in [J. Phys. A. 33 (2000) 5607]. It is also generalized for multi-photon Bose operators of Brandt and Greenberg. Similarly, condition for higher order subpoissonian photon statistics is derived by normal ordering of higher powers of number operator. Further, with the help of simple density matrices, it is shown that the higher order antibunching (HOA) and higher order subpoissonian photon statistics (HOSPS) are not the manifestation of the same phenomenon and consequently it is incorrect to use the condition of HOA as a test of HOSPS. It is also shown that the HOA and HOSPS may exist even in absence of the corresponding lower order phenomenon. Binomial state, nonlinear first order excited squeezed state (NLESS) and nonlinear vacuum squeezed state (NLVSS) are used as examples of quantum state and it is shown that these states may show higher order nonclssical characteristics. It is observed that the Binomial state which is always antibunched, is not always higher order squeezed and NLVSS which shows higher order squeezing does not show HOSPS and HOA. The opposite is observed in NLESS and consequently it is established that the HOSPS and HOS are two independent signatures of higher order nonclassicality

  7. Mathematical problems in higher order gravity and cosmology

    E-Print Network [OSTI]

    S. Cotsakis

    1997-12-10T23:59:59.000Z

    We discuss the issue of motivating the analysis of higher order gravity theories and their cosmologies and introduce a rule which states that these theories may be considered as a vehicle for testing whether certain properties may be of relevance to quantum theory. We discuss the physicality issue arising as a consequence of the conformal transformation theorem, the question of formulating a consistent first order formalism of such theories and also the isotropization problem for a class of generalized cosmologies. We point out that this field may have an important role to play in clarifying issues arising also in general relativity.

  8. Executive Order 13423- Strengthening Federal Environmental, Energy...

    Energy Savers [EERE]

    423- Strengthening Federal Environmental, Energy, and Transportation Management Executive Order 13423- Strengthening Federal Environmental, Energy, and Transportation Management It...

  9. President Truman Orders Development of Thermonuclear Weapon ...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Orders Development of Thermonuclear Weapon | National Nuclear Security Administration Facebook Twitter Youtube Flickr RSS People Mission Managing the Stockpile Preventing...

  10. Radiological Work Planning and Procedure

    SciTech Connect (OSTI)

    KURTZ, J.E.

    2000-01-01T23:59:59.000Z

    Each facility is tasked with maintaining personnel radiation exposure as low as reasonably achievable (ALARA). A continued effort is required to meet this goal by developing and implementing improvements to technical work documents (TWDs) and work performance. A review of selected TWDs from most facilities shows there is a need to incorporate more radiological control requirements into the TWD. The Radioactive Work Permit (RWP) provides a mechanism to place some of the requirements but does not provide all the information needed by the worker as he/she is accomplishing the steps of the TWD. Requiring the engineers, planners and procedure writers to put the radiological control requirements in the work steps would be very easy if all personnel had a strong background in radiological work planning and radiological controls. Unfortunately, many of these personnel do not have the background necessary to include these requirements without assistance by the Radiological Control organization at each facility. In addition, there seems to be confusion as to what should be and what should not be included in the TWD.

  11. Reimbursable Work for the Department of Homeland Security

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2006-08-17T23:59:59.000Z

    The Order establishes DOE policies and procedures for the acceptance, performance, and administration of reimbursable work directly funded by the Department of Homeland Security. Admin Chg 2, dated 6-30-14, cancels DOE O 484.1 Admin Chg 1.

  12. Reimbursable Work for the Department of Homeland Security

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2006-08-17T23:59:59.000Z

    The Order establishes DOE policies and procedures for the acceptance, performance, and administration of reimbursable work directly funded by the Department of Homeland Security. Cancels DOE N 481.1 and DOE N 251.62. Admin Chg 1, dated 3-14-11.

  13. Canister Storage Building (CSB) Hazard Analysis Report

    SciTech Connect (OSTI)

    POWERS, T.B.

    2000-03-16T23:59:59.000Z

    This report describes the methodology used in conducting the Canister Storage Building (CSB) Hazard Analysis to support the final CSB Safety Analysis Report and documents the results. This report describes the methodology used in conducting the Canister Storage Building (CSB) hazard analysis to support the CSB final safety analysis report (FSAR) and documents the results. The hazard analysis process identified hazardous conditions and material-at-risk, determined causes for potential accidents, identified preventive and mitigative features, and qualitatively estimated the frequencies and consequences of specific occurrences. The hazard analysis was performed by a team of cognizant CSB operations and design personnel, safety analysts familiar with the CSB, and technical experts in specialty areas. The material included in this report documents the final state of a nearly two-year long process. Attachment A provides two lists of hazard analysis team members and describes the background and experience of each. The first list is a complete list of the hazard analysis team members that have been involved over the two-year long process. The second list is a subset of the first list and consists of those hazard analysis team members that reviewed and agreed to the final hazard analysis documentation. The material included in this report documents the final state of a nearly two-year long process involving formal facilitated group sessions and independent hazard and accident analysis work. The hazard analysis process led to the selection of candidate accidents for further quantitative analysis. New information relative to the hazards, discovered during the accident analysis, was incorporated into the hazard analysis data in order to compile a complete profile of facility hazards. Through this process, the results of the hazard and accident analyses led directly to the identification of safety structures, systems, and components, technical safety requirements, and other controls required to protect the public, workers, and environment.

  14. CFCC working group meeting: Proceedings

    SciTech Connect (OSTI)

    NONE

    1997-12-31T23:59:59.000Z

    This report is a compilation of the vugraphs presented at this meeting. Presentations covered are: CFCC Working Group; Overview of study on applications for advanced ceramics in industries for the future; Design codes and data bases: The CFCC program and its involvement in ASTM, ISO, ASME, and military handbook 17 activities; CFCC Working Group meeting (McDermott Technology); CFCC Working Group meeting (Textron); CFCC program for DMO materials; Developments in PIP-derived CFCCs; Toughened Silcomp (SiC-Si) composites for gas turbine engine applications; CFCC program for CVI materials; Self-lubricating CFCCs for diesel engine applications; Overview of the CFCC program`s supporting technologies task; Life prediction methodologies for CFCC components; Environmental testing of CFCCs in combustion gas environments; High-temperature particle filtration ORNL/DCC CRADA; HSCT CMC combustor; and Case study -- CFCC shroud for industrial gas turbines.

  15. Long working distance interference microscope

    DOE Patents [OSTI]

    Sinclair, Michael B.; DeBoer, Maarten P.; Smith, Norman F.

    2004-04-13T23:59:59.000Z

    Disclosed is a long working distance interference microscope suitable for three-dimensional imaging and metrology of MEMS devices and test structures on a standard microelectronics probe station. The long working distance of 10-30 mm allows standard probes or probe cards to be used. This enables nanometer-scale 3-D height profiles of MEMS test structures to be acquired across an entire wafer. A well-matched pair of reference/sample objectives is not required, significantly reducing the cost of this microscope, as compared to a Linnik microinterferometer.

  16. Work Force Discipline--Withdrawn

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2012-04-05T23:59:59.000Z

    Withdrawn 4-26-14. Significant changes from the Order include the deletion of material included in other documents such as statutes and Federal regulations. In addition, an updated Table of Penalties now includes Smoking, Cyber Security, Standards of Conduct or other Ethical Violations, and the incorporation of the Travel and Purchase Card Guidance dated January 2003.

  17. Chemical Master versus Chemical Langevin for First-Order Reaction Networks

    E-Print Network [OSTI]

    Mottram, Nigel

    Chemical Master versus Chemical Langevin for First-Order Reaction Networks Desmond J. Higham Raya in computational cell biology, and in this case, the interactions are typically first-order. The Chemical Langevin effectively. In this work, we obtain expressions for the first and second moments of the Chemical Langevin

  18. Order Module--NNSA Orders Self-Study Program Safety Basis Documentatio...

    Broader source: Energy.gov (indexed) [DOE]

    NNSA Orders Self-Study Program Safety Basis Documentation Order Module--NNSA Orders Self-Study Program Safety Basis Documentation The familiar level of this module is divided into...

  19. Arbeidslivets lover Act relating to working environment,

    E-Print Network [OSTI]

    Johansen, Tom Henning

    Arbeidslivets lover Act relating to working environment, working hours and employment protection, etc. (Working Environment Act). as subsequently amended, last by the Act of 14. December 2012 No. 80.notification................................................................... 6 Chapter 3. Working environment measures..................................... 6 Section.3

  20. Idaho CERCLA Disposal Facility Complex Compliance Demonstration for DOE Order 435.1

    SciTech Connect (OSTI)

    J. Simonds

    2006-09-01T23:59:59.000Z

    This compliance demonstration document provides an analysis of the Idaho CERCLA Disposal Facility (ICDF) Complex compliance with DOE Order 435.1. The ICDF Complex includes the disposal facility (landfill), evaporation pond, admin facility, weigh scale, decon building, treatment systems, and various staging/storage areas. These facilities were designed and are being constructed to be compliant with DOE Order 435.1, Resource Conservation and Recovery Act Subtitle C, and Toxic Substances Control Act polychlorinated biphenyl design and construction standards. The ICDF Complex is designated as the central Idaho National Laboratory (INL) facilityyy for the receipt, staging/storage, treatment, and disposal of INL Comprehensive Environmental Response, Compensation and Liability Act (CERCLA) waste streams. This compliance demonstration document discusses the conceptual site model for the ICDF Complex area. Within this conceptual site model, the selection of the area for the ICDF Complex is discussed. Also, the subsurface stratigraphy in the ICDF Complex area is discussed along with the existing contamination beneath the ICDF Complex area. The designs for the various ICDF Complex facilities are also included in this compliance demonstration document. These design discussions are a summary of the design as presented in the Remedial Design/Construction Work Plans for the ICDF landfill and evaporation pond and the Staging, Storage, Sizing, and Treatment Facility. Each of the major facilities or systems is described including the design criteria.

  1. Ionic Conductivity of Block Copolymer Electrolytes in the Vicinity of Order?Disorder and Order?Order Transitions

    SciTech Connect (OSTI)

    Wanakule, Nisita S.; Panday, Ashoutosh; Mullin, Scott A.; Gann, Eliot; Hexemer, Alex; Balsara, Nitash P.; (UCB); (LBNL)

    2009-09-15T23:59:59.000Z

    Order-order and order-disorder phase transitions in mixtures of poly(styrene-block-ethylene oxide) (SEO) copolymers and lithium bis(trifluoromethylsulfonimide) (LiTFSI), a common lithium salt used in polymer electrolytes, were studied using a combination of small-angle X-ray scattering (SAXS), birefringence, and ac impedance spectroscopy. The SEO/LiTFSI mixtures exhibit lamellar, hexagonally packed cylinders, and gyroid microphases. The molecular weight of the blocks and the salt concentration was adjusted to obtain order-order and order-disorder transition temperatures within the available experimental window. The ionic conductivities of the mixtures, normalized by the ionic conductivity of a 20 kg/mol homopolymer PEO sample at the salt concentration and temperature of interest, were independent of temperature, in spite of the presence of the above-mentioned phase transitions.

  2. Federal Utility Partnership Working Group

    Broader source: Energy.gov [DOE]

    The Federal Utility Partnership Working Group (FUPWG) establishes partnerships and facilitates communications among Federal agencies, utilities, and energy service companies. The group develops strategies to implement cost-effective energy efficiency and water conservation projects through utility incentive programs at Federal sites.

  3. working with industry Engineering and

    E-Print Network [OSTI]

    Painter, Kevin

    of interests including: · laser physics · semiconductor optoelectronics · photonics in manufacturing · solar · micromechanics and condition monitoring · renewable energy modelling · carbon capture and storage Our institute to applied systems. We have a wide ranging programme of current work with many industrial companies in key

  4. The Examination of Factors Associated in Motorcycle Crashes in Work Zones.

    E-Print Network [OSTI]

    Stakleff, Brandon Alexander

    2013-01-01T23:59:59.000Z

    ??This paper analyzes the factors associated in motorcycle crashes in work zones. This analysis was completed through the collection and inspection of three types of (more)

  5. Reservoir and stimulation analysis of a Devonian Shale gas field

    E-Print Network [OSTI]

    Shaw, James Stanley

    1986-01-01T23:59:59.000Z

    . The Gas Research Institute (GRI) which sponsored this work under GRI Contract No. 5084-213-0980, "Analysis of Eastern Devonian Gas Shales Production Data;" 2. Doug Terry and Joe Petty with Union Drilling, Inc. who showed great interest in this study... and enhance productivity. ~St h The Devonian Shales in the Mason County Field study area can be subdivided using gamma ray logs as follows (in descending order): Upper Devonian Undivided, Huron Shale Member of the Ohio Shale, Java Formation, Angola Shale...

  6. Low Rem 3D MHD Hypersonic Equilibrium Flow Using High Order WENO Schemes

    E-Print Network [OSTI]

    Zha, Gecheng

    Low Rem 3D MHD Hypersonic Equilibrium Flow Using High Order WENO Schemes Jaejin Lee , Manuel A. Huerta , and Gecheng Zha University of Miami Coral Gables, Florida 33124 We present work on 3D hypersonic our work beyond the results presented in our previous paper, Lee, Huerta, and Zha.2 Hypersonic

  7. High-order Spatio-temporal Schemes for Coupled, Multi-physics Reactor Simulations

    SciTech Connect (OSTI)

    Mr. Vijay S. Mahadevan; Dr. Jean C. Ragusa

    2008-09-01T23:59:59.000Z

    This report summarizes the work done in the summer of 08 by the Ph.D. student Vijay Mahadevan. The main focus of the work was to coupled 3-D neutron difusion to 3-D heat conduction in parallel with accuracy greater than or equal to 2nd order in space and time. Results show that the goal was attained.

  8. NEAMS Software Licensing, Release, and Distribution: Implications for FY2013 Work Package Planning

    SciTech Connect (OSTI)

    Bernholdt, David E [ORNL

    2012-06-01T23:59:59.000Z

    The vision of the NEAMS program is to bring truly predictive modeling and simulation (M&S) capabilities to the nuclear engineering community in order to enable a new approach to the analysis of nuclear systems. NEAMS anticipates issuing in FY 2018 a full release of its computational 'Fermi Toolkit' aimed at advanced reactor and fuel cycles. The NEAMS toolkit involves extensive software development activities, some of which have already been underway for several years, however, the Advanced Modeling and Simulation Office (AMSO), which sponsors the NEAMS program, has not yet issued any official guidance regarding software licensing, release, and distribution policies. This motivated an FY12 task in the Capability Transfer work package to develop and recommend an appropriate set of policies. The current preliminary report is intended to provide awareness of issues with implications for work package planning for FY13. We anticipate a small amount of effort associated with putting into place formal licenses and contributor agreements for NEAMS software which doesn't already have them. We do not anticipate any additional effort or costs associated with software release procedures or schedules beyond those dictated by the quality expectations for the software. The largest potential costs we anticipate would be associated with the setup and maintenance of shared code repositories for development and early access to NEAMS software products. We also anticipate an opportunity, with modest associated costs, to work with the Radiation Safety Information Computational Center (RSICC) to clarify export control assessment policies for software under development.

  9. Hydrgoen Storage Systems Analysis Working Group Meeting Summary...

    Broader source: Energy.gov (indexed) [DOE]

    dusts (including the concentration of the powder and its ignition temperature and energy). Details of the respective test methods and test protocol development were...

  10. Hydrogen Storage Systems Analysis Working Group Meeting: Summary...

    Broader source: Energy.gov (indexed) [DOE]

    developers need a spreadsheet-type model that includes system-level components, such as tanks and heat exchangers, so that the developers can gauge the impact of such...

  11. HAMMER Budget Analysis (09-001) STATEMENT OF WORK

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation ProposedUsingFun with Big Sky LearningGetGraphene'sEMSLonly)EnergyP.Oc t o7COO.306?,

  12. Storage Systems Analysis Working Group | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment of Energy U.S.Improve Emitter4-01 ADMINISTRATIVEbriefSteveThe Storage Systems

  13. Hydrgoen Storage Systems Analysis Working Group Meeting Summary Report |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-UpHeatMulti-Dimensional Subject:Groundto Apply forInstitute Mission and Vision:

  14. Hydrogen Storage Systems Analysis Working Group Meeting: Summary Report |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-UpHeatMulti-Dimensional Subject:GroundtoProduction TechnicalSensor WorkshopM MDepartment

  15. Hydrogen Storage Systems Analysis Working Group Meeting: Summary Report |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-UpHeatMulti-Dimensional Subject:GroundtoProduction TechnicalSensor WorkshopM

  16. A PERFORMER'S ANALYSIS OF SELECTED JAZZ WORKS FOR SAXOPHONE QUARTET

    E-Print Network [OSTI]

    Spaeth, Carl Thomas

    2014-05-31T23:59:59.000Z

    Mintzer, Three Pieces for Saxophone Quartet, Swingin, soprano part, mm. 57-64 ........... 7 Example 3 - Piano reduction of Mintzer Movement 1, m. 1 ......................................................................... 9 Example 4 - Mintzer, Three... Pieces for Saxophone Quartet, Swingin, soprano part, mm. 13-14 ............ 9 Example 5 - Mintzer, Three Pieces for Saxophone Quartet, Softly, alto part, m. 36 .............................. 11 Example 6 - Mintzer, Three Pieces for Saxophone...

  17. Analysis of clerical operation by application of work sampling

    E-Print Network [OSTI]

    Springer, Joy Victor

    2012-06-07T23:59:59.000Z

    Number 15L AaBbCcDdLeff 'gRhliJ 2:Lli rl'. . ''& p q Date arne of C'perator Pay- 1 roll 2 3 4 Close 5 out 6 7 9 10 &r ? 11 riv- 12 ing 13 14 De- 15 part 16 ing 17 18 Bub 19 Doc 20 0th- 21 ers 22 23 24 iddre ssogra nh 115 Type..., 6, Nadler and D, H. Denholm applied the P Chart to oharting the delays 3 acd improving the accuracy~ cnd in the study three assumptions vere m=. dei "An estimation of down time for the group of machines~ the degree of accuracy desired...

  18. An overview of task order 10

    SciTech Connect (OSTI)

    Rousculp, Christopher L [Los Alamos National Laboratory

    2011-01-12T23:59:59.000Z

    Task Order 10 formalizes a collaboration in high explosive pulsed power (HEPP) experiments between LANL and VNIIEF. The focus is the VNIIEF disk explosive magnetic generator (DEMG) technology. The task order outlines a sequence of tasks and deliverables culminating in an experiment which takes place in the US utilizing US explosives and a Russian DEMG. This talk summarizes task order 10. It gives a brief history and present status in terms of the proposed high pressure EOS experiment (ALT-3).

  19. PUREX facility preclosure work plan

    SciTech Connect (OSTI)

    Engelmann, R.H.

    1997-04-24T23:59:59.000Z

    This preclosure work plan presents a description of the PUREX Facility, the history of the waste managed, and addresses transition phase activities that position the PUREX Facility into a safe and environmentally secure configuration. For purposes of this documentation, the PUREX Facility does not include the PUREX Storage Tunnels (DOE/RL-90/24). Information concerning solid waste management units is discussed in the Hanford Facility Dangerous Waste Permit Application, General Information Portion (DOE/RL-91-28, Appendix 2D).

  20. Hilbert's machine and w-order

    E-Print Network [OSTI]

    Antonio Leon

    2006-08-14T23:59:59.000Z

    Hilbert's machine is a supertask machine inspired by Hilbert's Hotel whose functioning leads to a contradictory result involving w-ordering.

  1. Intertwined Orders in High Temperature Superconductors

    E-Print Network [OSTI]

    Ostoja-Starzewski, Martin

    Intertwined Orders in High Temperature Superconductors ! Eduardo Fradkin University of Illinois · Electronic liquid crystal phases have also been seen heavy fermions and iron superconductors 7 #12

  2. Engineered Solutions: Order (2010-CE-2112)

    Broader source: Energy.gov [DOE]

    DOE issued an Order after entering into a Compromise Agreement with Engineered Solutions, Inc. to resolve a case involving the failure to certify dehumidifier basic model SD109.

  3. Second Order Geodesic Corrections to Cosmic Shear

    E-Print Network [OSTI]

    S. Dodelson; E. W. Kolb; S. Matarrese; A. Riotto; P. Zhang

    2005-03-07T23:59:59.000Z

    We consider the impact of second order corrections to the geodesic equation governing gravitational lensing. We start from the full second order metric, including scalar, vector and tensor perturbations, and retain all relevant contributions to the cosmic shear corrections that are second order in the gravitational potential. The relevant terms are: the nonlinear evolution of the scalar gravitational potential, the Born correction, and lens-lens coupling. No other second order terms contribute appreciably to the lensing signal. Since ray-tracing algorithims currently include these three effects, this derivation serves as rigorous justification for the numerical predictions.

  4. High-Order Energy Stable WENO Schemes

    E-Print Network [OSTI]

    A third-order Energy Stable Weighted Essentially Non--Oscillatory (ESWENO) finite difference scheme developed by the authors of the paper [N. K. Yamaleev...

  5. Ordered nanostructures through colloidal self assembly.

    E-Print Network [OSTI]

    Koh, Yaw Koon.

    2008-01-01T23:59:59.000Z

    ??The fabrication of ordered nanostructures plays an important role in the realization of the potential of nanotechnology and consequently, it has become an intense field (more)

  6. Innovative Corridors Initiative: Business Model Analysis

    E-Print Network [OSTI]

    Shaheen, Susan; Lingham, Viginia; Finson, Rachel S.

    2007-01-01T23:59:59.000Z

    Wenger, Joyce. Business Models for Vehicle InfrastructureCorridors Initiative: Business Model Analysis Rachel S.Corridors Initiative: Business Model Analysis Task Order

  7. July 2012, Work Force Retention Work Group Status Overview

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of EnergyEnergyENERGY TAX POLICIES7.pdfFuel2007 | Department7January 2015JimJulie Crenshaw Van10TrainingWork

  8. Work Force Retention Work Group Charter | Department of Energy

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of Inspector GeneralDepartment of EnergyofProject isNovember 07, 2007WhatJennifer B.RobinTerriYahelWork Force

  9. K Basins Hazard Analysis

    SciTech Connect (OSTI)

    WEBB, R.H.

    1999-12-29T23:59:59.000Z

    This report describes the methodology used in conducting the K Basins Hazard Analysis, which provides the foundation for the K Basins Safety Analysis Report (HNF-SD-WM-SAR-062, Rev.4). This hazard analysis was performed in accordance with guidance provided by DOE-STD-3009-94, Preparation Guide for U. S. Department of Energy Nonreactor Nuclear Facility Safety Analysis Reports and implements the requirements of DOE Order 5480.23, Nuclear Safety Analysis Report.

  10. K Basin Hazard Analysis

    SciTech Connect (OSTI)

    PECH, S.H.

    2000-08-23T23:59:59.000Z

    This report describes the methodology used in conducting the K Basins Hazard Analysis, which provides the foundation for the K Basins Final Safety Analysis Report. This hazard analysis was performed in accordance with guidance provided by DOE-STD-3009-94, Preparation Guide for U. S. Department of Energy Nonreactor Nuclear Facility Safety Analysis Reports and implements the requirements of DOE Order 5480.23, Nuclear Safety Analysis Report.

  11. THE TUKEY ORDER FOR GRAPHS 1. Introduction

    E-Print Network [OSTI]

    Nyikos, Peter J.

    THE TUKEY ORDER FOR GRAPHS 1. Introduction Given a graph G, we let VG stand for the vertex set of G. For graphs G without isolated vertices, the Tukey order can be characterized thus: () G H iff there exist) is called a (generalized) Galois-Tukey connection (abbreviated GT-connection) from R to S if the following

  12. FirstOrder CarnegieMellon

    E-Print Network [OSTI]

    Sandholm, Tuomas W.

    the order of universal quantifiers does not change the meaning: (Ax)(Ay)P(x,y) is logically equivalent of universals and existentials does change meaning: -- Everyone likes someone: (Ax)(Ey)likes(x,y) -- SomeoneFirst­Order Logic (FOL) aka. predicate calculus Tuomas Sandholm CarnegieMellon University Computer

  13. Constraints on topological order in Mott Insulators

    E-Print Network [OSTI]

    Michael P. Zaletel; Ashvin Vishwanath

    2015-04-18T23:59:59.000Z

    We point out certain symmetry induced constraints on topological order in Mott Insulators (quantum magnets with an odd number of spin $\\tfrac{1}{2}$ per unit cell). We show, for example, that the double semion topological order is incompatible with time reversal and translation symmetry in Mott insulators. This sharpens the Hastings-Oshikawa-Lieb-Schultz-Mattis theorem for 2D quantum magnets, which guarantees that a fully symmetric gapped Mott insulator must be topologically ordered, but is silent on which topological order is permitted. An application of our result is the Kagome lattice quantum antiferromagnet where recent numerical calculations of entanglement entropy indicate a ground state compatible with either toric code or double semion topological order. Our result rules out the latter possibility.

  14. The Work for Others Agreement

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear SecurityTensile Strain Switched Ferromagnetism in Layered NbS2 andThe MolecularPlaceThe publication of theWork for

  15. Working with SRNL - Technology Partnerships

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered energy consumption byAbout SRNL Home SRNL main campus Working with SRNL Our0/2015

  16. Working with SRNL - Technology Partnerships

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered energy consumption byAbout SRNL Home SRNL main campus Working with SRNL

  17. Working with SRNL - Technology Transfer

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered energy consumption byAbout SRNL Home SRNL main campus Working with SRNL05/07/2014

  18. Fermilab at Work | Fermilab Now

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation ProposedUsing ZirconiaPolicyFeasibility ofSmall Works:OklahomaatWayneFermilab Now Accelerator

  19. Fermilab at Work | Job Opportunities

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation ProposedUsing ZirconiaPolicyFeasibility ofSmall Works:OklahomaatWayneFermilab Now

  20. Fermilab at Work | Lab Life

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation ProposedUsing ZirconiaPolicyFeasibility ofSmall Works:OklahomaatWayneFermilab NowLab Life Abri

  1. Fermilab at Work | Physics Links

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation ProposedUsing ZirconiaPolicyFeasibility ofSmall Works:OklahomaatWayneFermilab NowLab Life AIP

  2. Fermilab | Fermilab at Work | Home

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary)morphinanInformation Desert Southwest Region service area. TheEPSCI Home It isGasERPSpunphoto Fermilab at Work Main

  3. An Arnoldi Approach for Generation of Reduced Order Models for Turbomachinery

    E-Print Network [OSTI]

    Willcox, Karen

    1999-01-01T23:59:59.000Z

    A linear reduced-order aerodynamic model is developed for aeroelastic analysis of turbo-machines. The basis vectors are constructed using a block Arnoldi method. Although the model is cast in the time domain in state-space ...

  4. Forces on a fixed barge due to Stokes 5th-Order laboratory waves

    E-Print Network [OSTI]

    Choi, Nag Joon

    2001-01-01T23:59:59.000Z

    This paper presents the results of experiment of nonlinear Stokes 5th order waves and forces measured in the Ocean Engineering Hydrodynamic Laboratory. It also presents analysis of the data and the comparison with hydrodynamic theory. We...

  5. Conservation and solar: working together

    SciTech Connect (OSTI)

    Balcomb, J.D.

    1980-01-01T23:59:59.000Z

    A methodology is developed for optimally allocating resources between conservation and solar strategies in building design. Formulas are presented for a constrained optimum in which the initial investment is limited. A global optimum procedure is also described in which life-cycle cost is minimized. The procedure is amenable to hand analysis if tables are available which give the Solar Savings Fraction as a function of the Load Collector Ratio for the locality. A numerical example is given.

  6. Order-by-order convergence of nuclear matter, neutron matter, and symmetry energy predictions in chiral effective theory

    E-Print Network [OSTI]

    F. Sammarruca; L. Coraggio; J. W. Holt; N. Itaco; R. Machleidt; L. E. Marcucci

    2014-11-01T23:59:59.000Z

    We report on microscopic calculations of the nuclear and neutron matter equations of state at zero temperature obtained from NLO, N$^2$LO, and N$^3$LO (next-to-next-to-next-to-leading order) nucleon-nucleon forces derived within the framework of chiral effective field theory. The leading N$^2$LO chiral three-nucleon force, with low-energy constants $c_D$ and $c_E$ fitted in the present work to reproduce the binding energies of $^3$H and $^3$He as well as the beta-decay lifetime of $^3$H, is also taken into account. The energy per particle of nuclear and neutron matter is then computed in the particle-particle ladder approximation up to densities several times that of saturated nuclear matter. We focus attention on the order-by-order convergence of the predicted nuclear and neutron matter equations of state, as well as the symmetry energy. Our study assesses the relevance of missing higher-order contributions in the chiral expansion that provide an important source of uncertainty not normally considered in nuclear many-body calculations.

  7. Toolbox Safety Talk Articulating Boom Work Platforms

    E-Print Network [OSTI]

    Pawlowski, Wojtek

    Toolbox Safety Talk Articulating Boom Work Platforms Environmental Health & Safety Facilities sign-in sheet to Environmental Health & Safety for recordkeeping. Articulating boom work platforms Articulating Boom Work Platforms Environmental Health & Safety Facilities Safety & Health Section 395 Pine Tree

  8. How Fuel Cells Work | Department of Energy

    Energy Savers [EERE]

    Fuel Cells Work How Energy Works 30 likes How Fuel Cells Work Fuel cells produce electrical power without any combustion and operate on fuels like hydrogen, natural gas and...

  9. THE HIGGS WORKING GROUP: SUMMARY REPORT.

    SciTech Connect (OSTI)

    DAWSON, S.; ET AL.

    2005-08-01T23:59:59.000Z

    This working group has investigated Higgs boson searches at the Tevatron and the LHC. Once Higgs bosons are found their properties have to be determined. The prospects of Higgs coupling measurements at the LHC and a high-energy linear e{sup +}e{sup -} collider are discussed in detail within the Standard Model and its minimal supersymmetric extension (MSSM). Recent improvements in the theoretical knowledge of the signal and background processes are presented and taken into account. The residual uncertainties are analyzed in detail. Theoretical progress is discussed in particular for the gluon-fusion processes gg {yields} H(+j), Higgs-bremsstrahlung off bottom quarks and the weak vector-boson-fusion (VBF) processes. Following the list of open questions of the last Les Houches workshop in 2001 several background processes have been calculated at next-to-leading order, resulting in a significant reduction of the theoretical uncertainties. Further improvements have been achieved for the Higgs sectors of the MSSM and NMSSM. This report summarizes our work performed before and after the workshop in Les Houches. Part A describes the theoretical developments for signal and background processes. Part B presents recent progress in Higgs boson searches at the Tevatron collider. Part C addresses the determination of Higgs boson couplings, part D the measurement of tan {beta} and part E Higgs boson searches in the VBF processes at the LHC. Part F summarizes Higgs searches in supersymmetric Higgs decays, part G photonic Higgs decays in Higgs-strahlung processes at the LHC, while part H concentrates on MSSM Higgs bosons in the intense-coupling regime at the LHC. Part I presents progress in charged Higgs studies and part J the Higgs discovery potential in the NMSSM at the LHC. The last part K describes Higgs coupling measurements at a 1 TeV linear e{sup +}e{sup -} collider.

  10. WORKING PAPER N 2008 -23 Education in Russia

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    WORKING PAPER N° 2008 - 23 Education in Russia: The evolution of theory and practice Natalia Kuznetsova Irina Peaucelle JEL Codes: I21; Z1 Keywords: analysis of education, cultural economics, Russia ­ ?COLE NORMALE SUP?RIEURE halshs-00586750,version1-18Apr2011 #12;1 Education in Russia: The Evolution

  11. CERNA WORKING PAPER SERIES Innovation and international technology transfer

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    1 CERNA WORKING PAPER SERIES Innovation and international technology transfer: The case technology transfer: The case of the Chinese photovoltaic industry Arnaud de la Tour, Matthieu Glachant, Yann emphasis on the role of technology transfers and innovation. Our analysis combines a review

  12. CERNA WORKING PAPER SERIES Assessing Indicators of Patent Quality

    E-Print Network [OSTI]

    1 CERNA WORKING PAPER SERIES Assessing Indicators of Patent Quality: Complex vs. Discrete-00488275,version1-1Jun2010 #12;2 Assessing Indicators of Patent Quality: Complex vs. Discrete Technologies indicators of patent quality in complex and discrete technologies using factor analysis and econometric

  13. WORK PLAN FOR ENVIRONMENTAL WORK PLAN FOR ENVIRONMENTAL WORK PLAN FOR ENVIRONMENTAL

    Office of Legacy Management (LM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment ofDepartment ofof EnergyYou$0.C.Greentnv~ronmenrar ivronrrorrng L V ~ / O UiWORK

  14. Transportation Protocols Working Group First Conference Call...

    Broader source: Energy.gov (indexed) [DOE]

    Call March 1, 1999 Conference Call Summary The first conference call of the Transportation External Coordination Working Group (TECWG) DOE Transportation Protocols Working...

  15. Federal Utility Partnership Working Group Utility Partners

    Broader source: Energy.gov [DOE]

    Federal Utility Partnership Working Group (FUPWG) utility partners are eager to work closely with Federal agencies to help achieve energy management goals.

  16. Covariance evaluation work at LANL

    SciTech Connect (OSTI)

    Kawano, Toshihiko [Los Alamos National Laboratory; Talou, Patrick [Los Alamos National Laboratory; Young, Phillip [Los Alamos National Laboratory; Hale, Gerald [Los Alamos National Laboratory; Chadwick, M B [Los Alamos National Laboratory; Little, R C [Los Alamos National Laboratory

    2008-01-01T23:59:59.000Z

    Los Alamos evaluates covariances for nuclear data library, mainly for actinides above the resonance regions and light elements in the enUre energy range. We also develop techniques to evaluate the covariance data, like Bayesian and least-squares fitting methods, which are important to explore the uncertainty information on different types of physical quantities such as elastic scattering angular distribution, or prompt neutron fission spectra. This paper summarizes our current activities of the covariance evaluation work at LANL, including the actinide and light element data mainly for the criticality safety study and transmutation technology. The Bayesian method based on the Kalman filter technique, which combines uncertainties in the theoretical model and experimental data, is discussed.

  17. FY 1996 annual work plan

    SciTech Connect (OSTI)

    NONE

    1995-09-30T23:59:59.000Z

    In April 1994, the Department of Energy (DOE) Strategic Plan was issued. This Plan presents the Department`s strategic outlook in response to a changing world. It discusses the Department`s unique capabilities; its mission, vision, and core values; and key customer and stakeholder considerations. The DOE Strategic Plan lists business strategies and critical success factors which are intended to aid the Department in accomplishing its mission and reaching its vision of itself in the future. The Office of Inspector General (OIG) has an important role in carrying out the goals and objectives of the Secretary`s Strategic Plan. The ultimate goal of the OIG is to facilitate positive change by assisting its customers, responsible Government officials, in taking actions to improve programs and operations. The Inspector General annually issues his own Strategic Plan that contains program guidance for the next fiscal year. As part of its responsibility in carrying out the OIG mission, the Office of the Deputy Inspector General for Audit Services (Office of Audit Services) publishes an Annual Work Plan that sets forth audits that are planned for the next fiscal year. Selection of these audits is based on the overall budget of the Department, analyses of trends in Departmental operations, guidance contained in the agency`s strategic plans, statutory requirements, and the expressed needs and audit suggestions of Departmental program managers and OIG managers and staff. This work plan includes audits that are carried over from FY 1995 and audits scheduled to start during FY 1996. Audits included in the plan will be performed by OIG staff.

  18. Working Remotely | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered energy consumption byAbout PrintableBlenderWhatFellowsWoodAnalysis &

  19. Working at ORNL | Careers | ORNL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered energy consumption byAbout PrintableBlenderWhatFellowsWoodAnalysis &Careers

  20. Working with Modules within Python

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered energy consumption byAbout PrintableBlenderWhatFellowsWoodAnalysisCFTF

  1. National Comfort Products: Order (2010-SE-0307)

    Broader source: Energy.gov [DOE]

    DOE ordered National Comfort Products to pay an $8,000 civil penalty after finding NCP had failed to conduct the required testing to certify that certain models of central air conditioners comply with the applicable energy conservation standard.

  2. Minka-Aire: Order (2014-CE-32018)

    Broader source: Energy.gov [DOE]

    DOE ordered Minka Lighting Inc. to pay a $8,000 civil penalty after finding Minka had failed to certify that certain models of ceiling fans comply with the applicable energy conservation standards.

  3. Kold Pack: Order (2013-CE-5323)

    Broader source: Energy.gov [DOE]

    DOE ordered Kold Pack, Inc. to pay a $8,000 civil penalty after finding Kold Pack had failed to certify that certain models of walk-in cooler and freezer components comply with the applicable energy conservation standards.

  4. Artisan Manufacturing: Order (2010-CW-0712)

    Broader source: Energy.gov [DOE]

    DOE ordered Artisan Manufacturing Company, Inc., to pay a $5,000 civil penalty after finding Artisan Manufacturing had failed to certify that certain models of faucets comply with the applicable water conservation standard.

  5. Explosive Safety Manual, to a New Order

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2010-12-02T23:59:59.000Z

    This memorandum provides justification for the conversion of Department of Energy (DOE) Manual (M) 440.1-1A, DOE Explosives Safety Manual, dated 1-9-06, into a new DOE Order.

  6. Dade Engineering: Order (2013-CE-5316)

    Broader source: Energy.gov [DOE]

    DOE ordered Dade Engineering Corp. to pay a $8,000 civil penalty after finding Dade Engineering had failed to certify that certain models of walk-in cooler and freezer (WICF) components comply with the applicable energy conservation standards.

  7. Engineered Products: Order (2012-SE-5401)

    Broader source: Energy.gov [DOE]

    DOE ordered Engineered Products Company to pay a $480 civil penalty after finding EPCO had manufactured/privately labeled and distributed in commerce in the U.S. 19 units of basic model 15701, a metal halide lamp fixture.

  8. Polar King: Order (2013-CE-5328)

    Broader source: Energy.gov [DOE]

    DOE ordered Polar King International Inc. to pay a $8,000 civil penalty after finding Polar King had failed to certify that certain models of walk-in cooler and freezer components comply with the applicable energy conservation standards.

  9. Goodman Manufacturing: Order (2012-CE-1509)

    Broader source: Energy.gov [DOE]

    DOE ordered Goodman Manufacturing Company L.P. to pay an $8,000 civil penalty after finding Goodman Manufacturing had failed to certify that certain room air conditioners comply with the applicable energy conservation standard.

  10. Midea Washing Appliance: Order (2011-CE-1903)

    Broader source: Energy.gov [DOE]

    DOE ordered Midea Washing Appliance Mfg. Co., Ltd. to pay a $6,000 civil penalty after finding Midea Washing Appliance had failed to certify that certain models of dishwashers comply with the applicable energy conservation standards.

  11. Order-Sorted Dependency Pairs Salvador Lucas

    E-Print Network [OSTI]

    Lucas, Salvador

    Order-Sorted Dependency Pairs Salvador Lucas DSIC, Universidad Polit´ecnica de Valencia, Spain modeled as many-sorted or, more Salvador Lucas was partially supported by the EU (FEDER) and the Spanish

  12. Anthony International: Order (2013-CE-5357)

    Broader source: Energy.gov [DOE]

    DOE ordered Anthony International to pay a $8,000 civil penalty after finding Anthony International had failed to certify that any basic models of walk-in cooler and freezer components comply with the applicable energy conservation standards.

  13. Hisense USA: Order (2010-CE-1211)

    Broader source: Energy.gov [DOE]

    DOE issued an Order after entering into a Compromise Agreement with Hisense USA Corp. after finding Hisense USA had failed to certify that certain models of residential refrigerators, refrigerator-freezers, and freezers comply with the applicable energy conservation standards.

  14. On perfect order subsets in finite groups

    E-Print Network [OSTI]

    Tuan, Nguyen Trong

    2010-01-01T23:59:59.000Z

    If $G$ is a finite group and $x\\in G$ then the set of all elements of $G$ having the same order as $x$ is called {\\em an order subset of $G$ determined by $x$} (see [2]). We say that $G$ is a {\\em group with perfect order subsets} or briefly, $G$ is a {\\em $POS$-group} if the number of elements in each order subset of $G$ is a divisor of $|G|$. In this paper we prove that for any $n\\geq 4$, the symmetric group $S_n$ is not $POS$-group. This gives the positive answer to one of two questions rising from Conjecture 5.2 in [3].

  15. Fagor America: Order (2013-CEW-19001)

    Broader source: Energy.gov [DOE]

    DOE ordered Fagor America, Inc. to pay a $13,000 civil penalty after finding Fagor America had failed to certify that certain models of residential refrigerator-freezers and dishwashers comply with the applicable energy and water conservation standards.

  16. Danby Products: Order (2012-CE-1415)

    Broader source: Energy.gov [DOE]

    DOE ordered Danby Products to pay a $9,900 civil penalty after finding Danby had failed to certify that certain models of refrigerators and freezers comply with the applicable energy conservation standard.

  17. Barclay Products: Order (2013-CW-3005)

    Broader source: Energy.gov [DOE]

    DOE ordered Barclay Products, Ltd. to pay a $8,000 civil penalty after finding Barclay Products had failed to certify that certain models of water closets comply with the applicable water conservation standards.

  18. Commercial Cooler: Order (2013-CE-5343)

    Broader source: Energy.gov [DOE]

    DOE ordered Commercial Cooler, Inc. to pay a $8,000 civil penalty after finding Commercial Cooler had failed to certify that certain models of walk-in cooler and freezer components comply with the applicable energy conservation standards.

  19. Southeast Cooler: Order (2013-CE-5331)

    Broader source: Energy.gov [DOE]

    DOE ordered Southeast Cooler Corp. to pay a $8,000 civil penalty after finding Southeast Cooler had failed to certify that certain models of walk-in cooler and freezer components comply with the applicable energy conservation standards.

  20. Golden Cooler: Order (2013-CE-5345)

    Broader source: Energy.gov [DOE]

    DOE ordered Golden Cooler to pay a $8,000 civil penalty after finding Golden Cooler had failed to certify that certain models of walk-in cooler and freezer components comply with the applicable energy conservation standards.

  1. Custom Coolers: Order (2013-CE-5315)

    Broader source: Energy.gov [DOE]

    DOE ordered Custom Coolers, LLC to pay a $8,000 civil penalty after finding Custom Coolers had failed to certify that certain models of walk-in cooler and freezer components comply with the applicable energy conservation standards.

  2. Topstar International: Order (2011-CE-2703)

    Broader source: Energy.gov [DOE]

    DOE ordered Topstar International, Inc. to pay a $6,000 civil penalty after finding Topstar International had failed to certify that certain models of incandescent reflector lamps comply with the applicable energy conservation standards.

  3. EiKO: Order (2011-CE-2702)

    Broader source: Energy.gov [DOE]

    DOE ordered EiKO Ltd. - North America to pay a $6,000 civil penalty after finding EiKO had failed to certify that certain models of incandescent reflector lamps comply with the applicable energy conservation standards.

  4. National Comfort Products: Order (2014-SE-16014)

    Broader source: Energy.gov [DOE]

    DOE ordered National Comfort Products to pay a $16,000 civil penalty after finding National Comfort Products had failed to certify that certain models of central air conditioners and heat pumps comply with the applicable energy conservation standards.

  5. Viking Range: Order (2014-CE-23014)

    Broader source: Energy.gov [DOE]

    DOE ordered Viking Range, LLC to pay a $8,000 civil penalty after finding Viking Range had failed to certify that certain models of cooking products comply with the applicable energy conservation standards.

  6. Euro Chef USA: Order (2014-CE-23004)

    Broader source: Energy.gov [DOE]

    DOE ordered Euro Chef USA Inc. to pay a $8,000 civil penalty after finding Euro Chef USA had failed to certify that certain models of cooking products comply with the applicable energy conservation standards.

  7. American Range: Order (2014-CE-23006)

    Broader source: Energy.gov [DOE]

    DOE ordered American Range Corporation to pay a $8,000 civil penalty after finding American Range had failed to certify that certain models of cooking products comply with the applicable energy conservation standards.

  8. Peerless-Premier: Order (2014-CE-23007)

    Broader source: Energy.gov [DOE]

    DOE ordered Peerless-Premier Appliance Co. to pay a $8,000 civil penalty after finding Peerless-Premier had failed to certify that certain models of cooking products comply with the applicable energy conservation standards.

  9. Nostalgia Products: Order (2014-CE-14017)

    Broader source: Energy.gov [DOE]

    DOE ordered Nostalgia Products Group, LLC to pay a $8,000 civil penalty after finding Nostalgia Products had failed to certify that certain models of refrigerators and refrigerator-freezers comply with the applicable energy conservation standards.

  10. MC Appliance: Order (2014-CE-20002)

    Broader source: Energy.gov [DOE]

    DOE ordered MC Appliance Corporation to pay a $16,000 civil penalty after finding MC Appliance had failed to certify that certain models of residential clothes washers and residential clothes dryers comply with the applicable energy conservation standards.

  11. American Valve: Order (2010-CW-1411)

    Broader source: Energy.gov [DOE]

    DOE ordered American Valve, Inc. to pay a $5,000 civil penalty after finding American Valve had failed to certify that certain showerhead models comply with the applicable water conservation standards.

  12. Ordered bed modular reactor design proposal

    SciTech Connect (OSTI)

    Tian, J. [Inst. of Nuclear Energy Technology, Tsinghua Univ., Beijing 100084 (China)

    2006-07-01T23:59:59.000Z

    The Ordered Bed Modular Reactor (OBMR) is a design as an advanced modular HTGR in which the annular reactor core is filled with an ordered bed of fuel spheres. This arrangement allows fuel elements to be poured into the core cavity which is shaped so that an ordered bed is formed and to be discharged from the core through the opening holes in the reactor top. These operations can be performed in a shutdown shorter time. The OBMR has the most of advantages from both the pebble bed reactor and block type reactor. Its core has great structural flexibility and stability, which allow increasing reactor output power and outlet gas temperature as well as decreasing core pressure drop. This paper introduces ordered packing bed characteristics, unloading and loading technique of the fuel spheres and predicted design features of the OBMR. (authors)

  13. USA Manufacturing: Order (2013-CE-5336)

    Broader source: Energy.gov [DOE]

    DOE ordered USA Manufacturing to pay a $8,000 civil penalty after finding USA Manufacturing had failed to certify that certain models of walk-in cooler and freezer components comply with the applicable energy conservation standards.

  14. Mackle Company: Order (2010-SE-0106)

    Broader source: Energy.gov [DOE]

    DOE ordered Mackle Company, Inc. to pay a $27,200 civil penalty after finding the company had failed to certify that a variety of refrigerators, refrigerator-freezers, and freezers comply with the applicable energy conservation standards.

  15. Hunter Fan: Order (2014-CE-32008)

    Broader source: Energy.gov [DOE]

    DOE ordered Hunter Fan Company to pay a $8,000 civil penalty after finding Hunter Fan had failed to certify that certain models of ceiling fans comply with the applicable energy conservation standards.

  16. Cospolich Refrigerator: Order (2013-CE-5314)

    Broader source: Energy.gov [DOE]

    DOE ordered Cospolich Refrigerator Co, Inc. to pay a $8,000 civil penalty after finding Cospolich Refrigerator had failed to certify that certain models of walk-in cooler and freezer components comply with the applicable energy conservation standards.

  17. International Refrigeration: Order (2012-CE-1510)

    Broader source: Energy.gov [DOE]

    DOE ordered International Refrigeration Products to pay an $8,000 civil penalty after finding International Refrigeration had failed to certify that certain room air conditioners comply with the applicable energy conservation standard.

  18. Refrigerator Manufacturers: Order (2013-CE-5341)

    Broader source: Energy.gov [DOE]

    DOE ordered Refrigerator Manufacturers, LLC to pay a $8,000 civil penalty after finding Refrigerator Manufacturers had failed to certify that certain models of walk-in cooler and freezer components comply with the applicable energy conservation standards.

  19. Propagation Plane waves -High order Modes

    E-Print Network [OSTI]

    Berlin,Technische Universität

    1 Propagation · Plane waves - High order Modes y x a One wave: p(x,y,t)=p0 cos(k y)e-jk x e j t vy(y,t)= 0 ; y=0,a xy } ky = n a Propagation · Plane waves - High order Modes x n a p(x,y,t)=pn cos( y + - +- + + - +- + - + + +- - - (m,n) #12;4 Propagation · Circular duct ­ Helical waves (spiralling waves) kc=m/a kz k

  20. Propagation Plane waves -High order Modes

    E-Print Network [OSTI]

    Berlin,Technische Universität

    1 Propagation · Plane waves - High order Modes y x a ky = n a One wave: p(x,y,t)=p0 cos(k y)e-jk x e j t vy(y,t)= 0 ; y=0,a xy } Propagation · Plane waves - High order Modes x n a p(x,y,t)=pn cos( y;4 Propagation · Circular duct ­ Helical waves (spiralling waves) kc=m/a kz kH Projection: Propagation #12

  1. Order and disorder in calciumsilicatehydrate

    SciTech Connect (OSTI)

    Bauchy, M., E-mail: bauchy@mit.edu [Concrete Sustainability Hub, Department of Civil and Environmental Engineering, Massachusetts Institute of Technology, 77 Massachusetts Avenue, Cambridge, Massachusetts 02139 (United States); MIT-CNRS Joint Laboratory at Massachusetts Institute of Technology, 77 Massachusetts Avenue, Cambridge, Massachusetts 02139 (United States); Qomi, M. J. Abdolhosseini; Ulm, F.-J. [Concrete Sustainability Hub, Department of Civil and Environmental Engineering, Massachusetts Institute of Technology, 77 Massachusetts Avenue, Cambridge, Massachusetts 02139 (United States); Pellenq, R. J.-M. [Concrete Sustainability Hub, Department of Civil and Environmental Engineering, Massachusetts Institute of Technology, 77 Massachusetts Avenue, Cambridge, Massachusetts 02139 (United States); MIT-CNRS Joint Laboratory at Massachusetts Institute of Technology, 77 Massachusetts Avenue, Cambridge, Massachusetts 02139 (United States); Centre Interdisciplinaire des Nanosciences de Marseille, CNRS and Aix-Marseille University, Campus de Luminy, 13288 Marseille Cedex 09 (France)

    2014-06-07T23:59:59.000Z

    Despite advances in the characterization and modeling of cement hydrates, the atomic order in CalciumSilicateHydrate (CSH), the binding phase of cement, remains an open question. Indeed, in contrast to the former crystalline model, recent molecular models suggest that the nanoscale structure of CSH is amorphous. To elucidate this issue, we analyzed the structure of a realistic simulated model of CSH, and compared the latter to crystalline tobermorite, a natural analogue of CSH, and to an artificial ideal glass. The results clearly indicate that CSH appears as amorphous, when averaged on all atoms. However, an analysis of the order around each atomic species reveals that its structure shows an intermediate degree of order, retaining some characteristics of the crystal while acquiring an overall glass-like disorder. Thanks to a detailed quantification of order and disorder, we show that, while CSH retains some signatures of a tobermorite-like layered structure, hydrated species are completely amorphous.

  2. An Economic Evaluation of the Hass Avocado Promotion Orders First Five Years

    E-Print Network [OSTI]

    Carman, Hoy; Li, Lan; Sexton, Richard J.

    2009-01-01T23:59:59.000Z

    An Economic Evaluation of the Hass Avocado Promotion Orders19 ii An Economic Evaluation of the Hass Avocado Promotionand R.K. Craft. An Economic Evaluation of California Avocado

  3. Using high-order methods on adaptively refined block-structured meshes - discretizations, interpolations, and filters.

    SciTech Connect (OSTI)

    Ray, Jaideep; Lefantzi, Sophia; Najm, Habib N.; Kennedy, Christopher A.

    2006-01-01T23:59:59.000Z

    Block-structured adaptively refined meshes (SAMR) strive for efficient resolution of partial differential equations (PDEs) solved on large computational domains by clustering mesh points only where required by large gradients. Previous work has indicated that fourth-order convergence can be achieved on such meshes by using a suitable combination of high-order discretizations, interpolations, and filters and can deliver significant computational savings over conventional second-order methods at engineering error tolerances. In this paper, we explore the interactions between the errors introduced by discretizations, interpolations and filters. We develop general expressions for high-order discretizations, interpolations, and filters, in multiple dimensions, using a Fourier approach, facilitating the high-order SAMR implementation. We derive a formulation for the necessary interpolation order for given discretization and derivative orders. We also illustrate this order relationship empirically using one and two-dimensional model problems on refined meshes. We study the observed increase in accuracy with increasing interpolation order. We also examine the empirically observed order of convergence, as the effective resolution of the mesh is increased by successively adding levels of refinement, with different orders of discretization, interpolation, or filtering.

  4. Impact assessment of draft DOE Order 5820.2B. Radioactive Waste Technical Support Program

    SciTech Connect (OSTI)

    NONE

    1995-04-01T23:59:59.000Z

    The Department of Energy (DOE) has prepared a revision to DOE Order 5820.2A, entitled ``Radioactive Waste Management.`` DOE issued DOE Order 5820.2A in September 1988 and, as the title implies, it covered only radioactive waste forms. The proposed draft order, entitled ``Waste Management,`` addresses the management of both radioactive and nonradioactive waste forms. It also includes spent nuclear fuel, which DOE does not consider a waste. Waste forms covered include hazardous waste, high-level waste, transuranic (TRU) waste, low-level radioactive waste, uranium and thorium mill tailings, mixed waste, and sanitary waste. The Radioactive Waste Technical Support Program (TSP) of Leached Idaho Technologies Company (LITCO) is facilitating the revision of this order. The EM Regulatory Compliance Division (EM-331) has requested that TSP estimate the impacts and costs of compliance with the revised order. TSP requested Dames & Moore to aid in this assessment by comparing requirements in Draft Order 5820.2B to ones in DOE Order 5820.2A and other DOE orders and Federal regulations. The assessment started with a draft version of 5820.2B dated January 14, 1994. DOE has released three updated versions of the draft order since then (dated May 20, 1994; August 26, 1994; and January 23, 1995). Each time DOE revised the order, Dames and Moore updated the assessment work to reflect the text changes. This report reflects the January 23, 1995 version of the draft order.

  5. Toolbox Safety Talk Hot Work Safety Procedures

    E-Print Network [OSTI]

    Pawlowski, Wojtek

    Toolbox Safety Talk Hot Work Safety Procedures Environmental Health & Safety Facilities Safety-in sheet to Environmental Health & Safety for recordkeeping. "Hot Work" is defined as any temporary WORK Obtain a hot work permit from your supervisor or safety rep. Ensure fire/smoke detection

  6. ASBESTOS GUIDANCE FOR CONTRACTORS WORKING ON

    E-Print Network [OSTI]

    Guo, Zaoyang

    are broadly defined as anyone carrying out work or managing work on behalf of the University and could range Executive (HSE) are allowed to work on ACMs on University premises. 3. ASBESTOS REGULATIONS 3.1 Work, equipment, fume cupboards etc) are properly managed so that any person, who may be affected, is not exposed

  7. Work Force Planning for Public Power Utilities

    E-Print Network [OSTI]

    Work Force Planning for Public Power Utilities: Ensuring Resources to Meet Projected Utilities Need to Do More to Prepare for Their Future Work Force Needs.............................................................................20 #12;ii Work Force Planning for Public Power Utilities #12;1 Work Force Planning for Public Power

  8. EFCOG Work Management Sub-Working Group Session on Overview and...

    Broader source: Energy.gov (indexed) [DOE]

    EFCOG Work Management Sub-Working Group Session on Overview and Results from WP&C Assist Visits across Complex EFCOG Work Management Sub-Working Group Session on Overview and...

  9. KANSAS WIND POWERING AMERICAN STATE OUTREACH: KANSAS WIND WORKING GROUP

    SciTech Connect (OSTI)

    HAMMARLUND, RAY

    2010-10-27T23:59:59.000Z

    The Kansas Wind Working Group (WWG) is a 33-member group announced by former Governor Kathleen Sebelius on Jan. 7, 2008. Formed through Executive Order 08-01, the WWG will educate stakeholder groups with the current information on wind energy markets, technologies, economics, policies, prospects and issues. Governor Mark Parkinson serves as chair of the Kansas Wind Working Group. The group has been instrumental in focusing on the elements of government and coordinating government and private sector efforts in wind energy development. Those efforts have moved Kansas from 364 MW of wind three years ago to over 1000 MW today. Further, the Wind Working Group was instrumental in fleshing out issues such as a state RES and net metering, fundamental parts of HB 2369 that was passed and is now law in Kansas. This represents the first mandatory RES and net metering in Kansas history.

  10. Reduced order modeling of fluid/structure interaction.

    SciTech Connect (OSTI)

    Barone, Matthew Franklin; Kalashnikova, Irina; Segalman, Daniel Joseph; Brake, Matthew Robert

    2009-11-01T23:59:59.000Z

    This report describes work performed from October 2007 through September 2009 under the Sandia Laboratory Directed Research and Development project titled 'Reduced Order Modeling of Fluid/Structure Interaction.' This project addresses fundamental aspects of techniques for construction of predictive Reduced Order Models (ROMs). A ROM is defined as a model, derived from a sequence of high-fidelity simulations, that preserves the essential physics and predictive capability of the original simulations but at a much lower computational cost. Techniques are developed for construction of provably stable linear Galerkin projection ROMs for compressible fluid flow, including a method for enforcing boundary conditions that preserves numerical stability. A convergence proof and error estimates are given for this class of ROM, and the method is demonstrated on a series of model problems. A reduced order method, based on the method of quadratic components, for solving the von Karman nonlinear plate equations is developed and tested. This method is applied to the problem of nonlinear limit cycle oscillations encountered when the plate interacts with an adjacent supersonic flow. A stability-preserving method for coupling the linear fluid ROM with the structural dynamics model for the elastic plate is constructed and tested. Methods for constructing efficient ROMs for nonlinear fluid equations are developed and tested on a one-dimensional convection-diffusion-reaction equation. These methods are combined with a symmetrization approach to construct a ROM technique for application to the compressible Navier-Stokes equations.

  11. CHAPTER 5: CONCLUSIONS AND FUTURE WORK Theoretical predictions of the mechanical properties of carbon nanotubes, and

    E-Print Network [OSTI]

    Fisher, Frank

    of multifunctional composite materials with controllable electrical and thermal properties, in addition to order to these material systems within the last few years. Initial experimental work on carbon nanotube properties of carbon nanotubes, and in particular their predicted high strengths (on the order of 60 GPa

  12. Second Order draft Fourth Assessment Report, Working Group III Do Not Cite or Quote 1 Summary for Policy Makers

    E-Print Network [OSTI]

    decreases in energy use per unit of GDP, while carbon intensity of energy did not change much (Figure SPM.2) (Figure SPM.1). This has occurred because increases in population and10 GDP per capita have outweighed-2003 Decade GtCO2 CO2/Energy Energy/GDP(PPP) GDP(PPP)/POP POP Net change -1.5 -1 -0.5 0 0.5 1 1.5 2 2.5 1973

  13. Supplier Identify Need Determine Best Value & Select Supplier Place Order Receive Order Payment Close Order, Inventory, Recycle Non-Preferred

    E-Print Network [OSTI]

    Shull, Kenneth R.

    Close Order, Inventory, Recycle Non-Preferred Vendor/Non-Catalog REQuisition Approver(s) receive or service by an external company For purchases of goods over $5000, follow inventory process Ready to dispose or recycle? See Equipment Inventory & Disposal policy Yes Requestor creates a non

  14. Edinburgh Research Explorer Identity work and face work across linguistic and cultural

    E-Print Network [OSTI]

    Millar, Andrew J.

    ­54 John E. Joseph Identity work and face work across linguistic and cultural boundaries Abstract:1Edinburgh Research Explorer Identity work and face work across linguistic and cultural boundaries Citation for published version: Joseph, JE 2013, 'Identity work and face work across linguistic

  15. Conformal higher-order viscoelastic fluid mechanics

    E-Print Network [OSTI]

    Masafumi Fukuma; Yuho Sakatani

    2012-05-28T23:59:59.000Z

    We present a generally covariant formulation of conformal higher-order viscoelastic fluid mechanics with strain allowed to take arbitrarily large values. We give a general prescription to determine the dynamics of a relativistic viscoelastic fluid in a way consistent with the hypothesis of local thermodynamic equilibrium and the second law of thermodynamics. We then elaborately study the transient time scales at which the strain almost relaxes and becomes proportional to the gradients of velocity. We particularly show that a conformal second-order fluid with all possible parameters in the constitutive equations can be obtained without breaking the hypothesis of local thermodynamic equilibrium, if the conformal fluid is defined as the long time limit of a conformal second-order viscoelastic system. We also discuss how local thermodynamic equilibrium could be understood in the context of the fluid/gravity correspondence.

  16. An order-theoretic quantification of contextuality

    E-Print Network [OSTI]

    Ian T. Durham

    2014-09-23T23:59:59.000Z

    In this essay, I develop order-theoretic notions of determinism and contextuality on domains and topoi. In the process, I develop a method for quantifying contextuality and show that the order-theoretic sense of contextuality is analogous to the sense embodied in the topos-theoretic statement of the Kochen-Specker theorem. Additionally, I argue that this leads to a relation between the entropy associated with measurements on quantum systems and the second law of thermodynamics. The idea that the second law has its origin in the ordering of quantum states and processes dates to at least 1958 and possibly earlier. The suggestion that the mechanism behind this relation is contextuality, is made here for the first time.

  17. Effect of Second-Order Hydrodynamics on a Floating Offshore Wind Turbine

    SciTech Connect (OSTI)

    Roald, L.; Jonkman, J.; Robertson, A.

    2014-05-01T23:59:59.000Z

    The design of offshore floating wind turbines uses design codes that can simulate the entire coupled system behavior. At the present, most codes include only first-order hydrodynamics, which induce forces and motions varying with the same frequency as the incident waves. Effects due to second- and higher-order hydrodynamics are often ignored in the offshore industry, because the forces induced typically are smaller than the first-order forces. In this report, first- and second-order hydrodynamic analysis used in the offshore oil and gas industry is applied to two different wind turbine concepts--a spar and a tension leg platform.

  18. Smectic Order in Double-Twist Cylinders

    E-Print Network [OSTI]

    Randall D. Kamien

    1996-11-04T23:59:59.000Z

    I propose a double-twist texture with local smectic order, which may have been seen in recent experiments. As in the Renn-Lubensky TGB phase, the smectic order is broken only through a lattice of screw dislocations. A melted lattice of screw dislocations can produce a double-twist texture as can an unmelted lattice. In the latter case I show that geometry only allows for certain angles between smectic regions. I discuss the possibility of connecting these double-twist tubes together to form a smectic blue phase.

  19. Representations of the groups of order 64

    E-Print Network [OSTI]

    Hansen, Roger Finn

    1967-01-01T23:59:59.000Z

    -seven groups of order 64 are divided into twenty-seven families, . The families are denoted by 0, i = 1 2, . . . , 27. 1 Definition 2. 9. Two groups belong to the same ~famil if they are isoclinic. Definition 2. 10. The groups of lowest order in a family.... Then Z (G) = C 0( C and G/Z (G) = 16 I'2 al. As in the previous example G/2 (G) consists of the following cosets: g ' = (1, 2, 3, 4) g ' = (5678) 16' = (61, 62, 63, 64) 15 The following table was calculated using a representative ele- ment from...

  20. Lumiram Electric: Order (2010-CE-1014) | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Lumiram Electric: Order (2010-CE-1014) Lumiram Electric: Order (2010-CE-1014) November 23, 2010 DOE issued an Order and entered into a Compromise Agreement with Lumiram Electric...

  1. ITER MHD stability analysis. Final report

    SciTech Connect (OSTI)

    Turnbull, A.D.

    1996-05-01T23:59:59.000Z

    This report summarizes the final results and conclusions from work done for ITER under the DOE Task 18 (Raytheon Task ITER-GA 4002E). The work was performed in collaboration with D. Pearlstein and R. Bulmer of the Lawrence Livermore National Laboratory (LLNL), in close conjunction with D. Boucher of the ITER Joint Central Team (JCT). The work was partly done at General Atomics in San Diego and partly at LLNL. Approximately eight hours per week were spent from August 1994 through June 1995, with a no-cost extension through December 1995. The report covers work on the ideal MHD stability analysis for the ITER TAC scenarios and DIII-D ITER Demonstration Discharges, code modifications performed in order to efficiently and accurately complete the stability calculations, and additional collaborative efforts involving code benchmarking and dissemination of the DIII-D ITER Demonstration Discharge data. The work spawned several presentations and reports, including significant contributions to published IAEA Proceedings, and these are also summarized. 8 refs., 9 figs.

  2. Estimating the spectral indices of correlated astrophysical foregrounds by a second-order statistical approach

    E-Print Network [OSTI]

    Bonaldi, A; Salerno, E; Baccigalupi, C; De Zotti, G

    2006-01-01T23:59:59.000Z

    We present the first tests of a new method, the Correlated Component Analysis (CCA) based on second-order statistics, to estimate the mixing matrix, a key ingredient to separate astrophysical foregrounds superimposed to the Cosmic Microwave Background (CMB). In the present application, the mixing matrix is parameterized in terms of the spectral indices of Galactic synchrotron and thermal dust emissions, while the free-free spectral index is prescribed by basic physics, and is thus assumed to be known. We consider simulated observations of the microwave sky with angular resolution and white stationary noise at the nominal levels for the PLANCK satellite, and realistic foreground emissions, with a position dependent synchrotron spectral index. We work with two sets of PLANCK frequency channels: the low frequency set, from 30 to 143 GHz, complemented with the Haslam 408 MHz map, and the high frequency set, from 217 to 545 GHz. The concentration of intense free-free emission on the Galactic plane introduces a ste...

  3. Ornament after the orders : Percier, Fontaine and the rise of the architectural interior in post-revolutionary France

    E-Print Network [OSTI]

    Moon, Iris (Iris Jee)

    2013-01-01T23:59:59.000Z

    This dissertation explores the collaborative work in interior decoration undertaken by the French architects Charles Percier (1764-1838) and Pierre-Franois-Lonard Fontaine (1762- 1853), in order to argue that their shared ...

  4. Topological Order in Frustrated Josephson Junction Arrays

    E-Print Network [OSTI]

    M. C. Diamantini; P. Sodano; C. A. Trugenberger

    2008-06-02T23:59:59.000Z

    We show that electrically and magnetically frustrated Josephson junction arrays (JJAs) realize topological order with a non-trivial ground state degeneracy on manifolds with non-trivial topology. The low-energy theory has the same gauge dynamics of the unfrustrated JJAs but for different, "fractional" degrees of freedom, a principle reminescent of Jain's composite electrons in the fractional quantum Hall effect.

  5. First-order MDPs Scott Sanner

    E-Print Network [OSTI]

    Sanner, Scott

    , truck2}, City = {paris, berlin, rome} · Ground Fluents(i.e., binary statevariables): ­ BoxIn: {BoxFirst-order MDPs Scott Sanner NICTA / ANU Motivation #12;FOMDP Tutorial Outline · Motivation... ­ Refer to relational fluents: · e.g., BIn(?b,?c), OnTable(?b) · specify relations between objects

  6. R-Cold: Order (2013-CE-5354)

    Broader source: Energy.gov [DOE]

    DOE ordered R-Cold, Inc. to pay a $8,000 civil penalty after finding R-Cold had failed to certify that any basic models of walk-in cooler or freezer components comply with the applicable energy conservation standards.

  7. Lutron Electronics: Order (2012-SE-3796)

    Broader source: Energy.gov [DOE]

    DOE ordered Lutron Electronics Co., Inc. to pay a $13,000 civil penalty after finding Lutron Electronics had manufactured and distributed in commerce in the U.S. at least 79,000 units of various basic models, noncompliant Class A external power supplies.

  8. Side Orders Potato Wedges 1.60

    E-Print Network [OSTI]

    Dixon, Peter

    Side Orders Potato Wedges £1.60 Choose your dip from: Soured Cream, Spicy Salsa or Barbecue Potato Wedges topped with Cheese £2.00 Choose your dip from: Soured Cream, Spicy Salsa or Barbecue Potato Wedges leaf salad, potato wedges and a soured cream dip. Refried Bean Burrito £5.25 Refried beans, onions

  9. Thermo Products: Order (2011-SE-1603)

    Broader source: Energy.gov [DOE]

    DOE ordered Thermo Products, LLC, to pay a $6,000 civil penalty after finding Thermo Products had failed to conduct the required testing to certify that certain models of central air conditioning heat pumps comply with the applicable energy conservation standard.

  10. American Cooler Technologies: Order (2013-CE-5305)

    Broader source: Energy.gov [DOE]

    DOE ordered American Cooler Technologies to pay a $8,000 civil penalty after finding American Cooler Technologies had failed to certify that certain models of walk-in coolers or freezers (WICF) components comply with the applicable energy conservation standards.

  11. General Restaurant Equipment: Order (2013-CE-5344)

    Broader source: Energy.gov [DOE]

    DOE ordered General Restaurant Equipment Co. to pay a $8,000 civil penalty after finding General Restaurant Equipment had failed to certify that certain models of walk-in cooler and freezer components comply with the applicable energy conservation standards.

  12. Metl-Span: Order (2013-CE-5352)

    Broader source: Energy.gov [DOE]

    DOE ordered Metl-Span LLC to pay a $8,000 civil penalty after finding Metl-Span had failed to certify that any basic models of walk-in cooler and freezer components comply with the applicable energy conservation standards.

  13. Kingspan Insulated Panels: Order (2013-CE-5353)

    Broader source: Energy.gov [DOE]

    DOE ordered Kingspan Insulated Panels, Inc. to pay a $8,000 civil penalty after finding Kingspan Insulated Panels had failed to certify that any basic models of walk-in cooler and freezer components comply with the applicable energy conservation standards.

  14. Matthews Fan: Order (2014-CE-32012)

    Broader source: Energy.gov [DOE]

    DOE ordered Matthews-Gerbar, Ltd. d/b/a Matthews Fan Company to pay a $8,000 civil penalty after finding Matthews had failed to certify that certain models of ceiling fans comply with the applicable energy conservation standards.

  15. Duracold Refrigeration Manufacturing: Order (2013-CE-5342)

    Broader source: Energy.gov [DOE]

    DOE ordered Duracold Refrigeration Manufacturing Company, LLC to pay a $8,000 civil penalty after finding Duracold Refrigeration Manufacturing had failed to certify that certain models of walk-in cooler and freezer components comply with the applicable energy conservation standards.

  16. Commercial Refrigerator Door: Order (2013-CE-5351)

    Broader source: Energy.gov [DOE]

    DOE ordered Commercial Refrigerator Door Company, Inc. to pay a $8,000 civil penalty after finding Commercial Refrigerator Door had failed to certify that a variety of models of walk-in cooler and freezer components comply with the applicable energy conservation standards.

  17. North Star Refrigerator: Order (2013-CE-5355)

    Broader source: Energy.gov [DOE]

    DOE ordered North Star Refrigerator Co., Inc. to pay a $8,000 civil penalty after finding North Star Refrigerator had failed to certify that any basic models of walk-in cooler and freezer components comply with the applicable energy conservation standards.

  18. On Programs with Linearly Ordered Multiple Preferences

    E-Print Network [OSTI]

    Vermeir, Dirk

    programs allows for the defeat of rules to resolve contradictions. We propose a refinement of these se the following extended answer sets: N 1 = {local , politics} N 2 = {local , sports} N 3 = {national , economy} N 4 = {international , economy} . The redaction wishes to order them according to their preferences

  19. Report on all ARRA Funded Technical Work

    SciTech Connect (OSTI)

    None

    2013-10-05T23:59:59.000Z

    The main focus of this American Recovery and Reinvestment Act of 2009 (ARRA) funded project was to design an energy efficient carbon capture and storage (CCS) process using the Recipient?s membrane system for H{sub 2} separation and CO{sub 2} capture. In the ARRA-funded project, the Recipient accelerated development and scale-up of ongoing hydrogen membrane technology research and development (R&D). Specifically, this project focused on accelerating the current R&D work scope of the base program-funded project, involving lab scale tests, detail design of a 250 lb/day H{sub 2} process development unit (PDU), and scale-up of membrane tube and coating manufacturing. This project scope included the site selection and a Front End Engineering Design (FEED) study of a nominally 4 to 10 ton-per-day (TPD) Pre-Commercial Module (PCM) hydrogen separation membrane system. Process models and techno-economic analysis were updated to include studies on integration of this technology into an Integrated Gasification Combined Cycle (IGCC) power generation system with CCS.

  20. ACTIVE GALACTIC NUCLEUS FEEDBACK WORKS BOTH WAYS

    SciTech Connect (OSTI)

    Zinn, P.-C.; Middelberg, E.; Dettmar, R.-J. [Astronomical Institute of Ruhr-University Bochum, Universitaetsstrasse 150, D-44801 Bochum (Germany); Norris, R. P. [CSIRO Astronomy and Space Science, P.O. Box 76, Epping, NSW 1710 (Australia)

    2013-09-01T23:59:59.000Z

    Simulations of galaxy growth need to invoke strong negative feedback from active galactic nuclei (AGNs) to suppress the formation of stars and thus prevent the over-production of very massive systems. While some observations provide evidence for such negative feedback, other studies find either no feedback or even positive feedback, with increased star formation associated with higher AGN luminosities. Here we report an analysis of several hundred AGNs and their host galaxies in the Chandra Deep Field South using X-ray and radio data for sample selection. Combined with archival far-infrared data as a reliable tracer of star formation activity in the AGN host galaxies, we find that AGNs with pronounced radio jets exhibit a much higher star formation rate (SFR) than the purely X-ray-selected ones, even at the same X-ray luminosities. This difference implies that positive AGN feedback plays an important role, too, and therefore has to be accounted for in all future simulation work. We interpret this to indicate that the enhanced SFR of radio-selected AGNs arises because of jet-induced star formation, as is suggested by the different jet powers among our AGN samples, while the suppressed SFR of X-ray selected AGN is caused by heating and photo-dissociation of molecular gas by the hot AGN accretion disk.

  1. Order acceptance and scheduling at a make-to-order system using revenue management

    E-Print Network [OSTI]

    Jalora, Anshu

    2006-10-30T23:59:59.000Z

    opportunity cost for processing the order. Discrete time formulations based on stochastic dynamic programming (SDP) approach are common in RM literature [14]. The way this approach is executed is as follows. Under the assumptions of a Poisson arrival process... is rejected and is 21 accepted is compared with the profits earned by processing the order at hand. If the comparison is in favor of the order, the order is accepted, otherwise it is rejected. Following this general approach, we develop SDP formulation for our...

  2. Visualizing Higher Order Finite Elements: FY05 Yearly Report.

    SciTech Connect (OSTI)

    Thompson, David; Pebay, Philippe Pierre

    2005-11-01T23:59:59.000Z

    This report contains an algorithm for decomposing higher-order finite elementsinto regions appropriate for isosurfacing and proves the conditions under which thealgorithm will terminate. Finite elements are used to create piecewise polynomialapproximants to the solution of partial differential equations for which no analyticalsolution exists. These polynomials represent fields such as pressure, stress, and mo-mentim. In the past, these polynomials have been linear in each parametric coordinate.Each polynomial coefficient must be uniquely determined by a simulation, and thesecoefficients are called degrees of freedom. When there are not enough degrees of free-dom, simulations will typically fail to produce a valid approximation to the solution.Recent work has shown that increasing the number of degrees of freedom by increas-ing the order of the polynomial approximation (instead of increasing the number offinite elements, each of which has its own set of coefficients) can allow some typesof simulations to produce a valid approximation with many fewer degrees of freedomthan increasing the number of finite elements alone. However, once the simulation hasdetermined the values of all the coefficients in a higher-order approximant, tools donot exist for visual inspection of the solution.This report focuses on a technique for the visual inspection of higher-order finiteelement simulation results based on decomposing each finite element into simplicialregions where existing visualization algorithms such as isosurfacing will work. Therequirements of the isosurfacing algorithm are enumerated and related to the placeswhere the partial derivatives of the polynomial become zero. The original isosurfacingalgorithm is then applied to each of these regions in turn.3 AcknowledgementThe authors would like to thank David Day and Louis Romero for their insight into poly-nomial system solvers and the LDRD Senior Council for the opportunity to pursue thisresearch. The authors were supported by the United States Department of Energy, Officeof Defense Programs by the Labratory Directed Research and Development Senior Coun-cil, project 90499. Sandia is a multiprogram laboratory operated by Sandia Corporation,a Lockheed-Martin Company, for the United States Department of Energy under contractDE-AC04-94-AL85000.4

  3. Elements of doing work at SSRL (rev

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    follow JHAMs, safety procedures, and work plans (e.g., non-routine JHAMs, equipment lockout procedures, and radiation safety work control forms). 2. Ensure STAs are up to date...

  4. From Higher Education To Work In West

    E-Print Network [OSTI]

    Mohaghegh, Shahab

    From Higher Education To Work In West Virginia 2009 Summary Results For Work Participation Virginia Higher Education Policy Commission By George W. Hammond, Associate Director Adam Hoffer, Graduate Virginia Higher Education Policy Commission. Opinions expressed herein are the responsibility

  5. WorkLife Office Choosing Child Care

    E-Print Network [OSTI]

    Straight, Aaron

    and Communication....................................................... 22 Recycled ResourcesWorkLife Office Choosing Child Care Resources for Making Child Care Decisions WorkLife Office 3160 an Employer ............................. 14 IV. CHILD CARE RESOURCES Child Care Drop

  6. How Solar Works | Department of Energy

    Energy Savers [EERE]

    Learn More How Fusion Energy Works 33 likes Fusion energy is the energy source of the sun and all of the stars. As part of How Energy Works, we'll cover everything from fuel...

  7. Identity work and control in occupational communities

    E-Print Network [OSTI]

    Van Maanen, John

    This chapter is about three highly intertwined concepts. The first concerns occupational communities and the work cultures they nourish. The second concerns the work identities that are valued (and devalued) in such ...

  8. Implementation of Executive Order 13514, Federal Leadership in...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Executive Order 13514, Federal Leadership in Environmental, Energy, and Economic Performance Implementation of Executive Order 13514, Federal Leadership in...

  9. How to Work With the Media Webinar

    Broader source: Energy.gov [DOE]

    How to Work With the Media Webinar, from the U.S. Department of Energy's Better Buildings Neighborhood Program.

  10. Solar Industry at Work | Laila Mattos

    ScienceCinema (OSTI)

    Mattos, Laila

    2013-05-29T23:59:59.000Z

    Laila Mattos, a technology manager at Alta Devices, talks about what it means to work for a "disruptive" solar company.

  11. Agenda: High Temperature Membrane Working Group Meeting

    Broader source: Energy.gov [DOE]

    Agenda for the High Temperature Membrane Working Group (HTMWG) meeting on May 18, 2009, in Arlington, Virginia

  12. Solar Industry at Work | Laila Mattos

    SciTech Connect (OSTI)

    Mattos, Laila

    2012-01-01T23:59:59.000Z

    Laila Mattos, a technology manager at Alta Devices, talks about what it means to work for a "disruptive" solar company.

  13. @ work' video segment features Robotic Software Engineer

    ScienceCinema (OSTI)

    Idaho National Laboratory

    2010-01-08T23:59:59.000Z

    @ work highlights Idaho National Laboratory employees and the jobs they perform.This segment features Robotic Software Engineer Miles Walton.

  14. Automated Job Hazards Analysis

    Broader source: Energy.gov [DOE]

    AJHA Program - The Automated Job Hazard Analysis (AJHA) computer program is part of an enhanced work planning process employed at the Department of Energy's Hanford worksite. The AJHA system is routinely used to performed evaluations for medium and high risk work, and in the development of corrective maintenance work packages at the site. The tool is designed to ensure that workers are fully involved in identifying the hazards, requirements, and controls associated with tasks.

  15. Eye Safety At Work Is Everyone's Business.

    E-Print Network [OSTI]

    Baker, Chris I.

    Eye Safety At Work Is Everyone's Business. Preventing Work-Related Eye Injuries Each day, about 2,000 U.S. workers receive medical treatment because of eye injuries sustained at work. Workplace injury is a leading cause of eye trauma, vision loss, disability, and blindness, and can interfere with your ability

  16. STUDY OF WORKING FLUID MIXTURES AND HIGH TEMPERATURE WORKING FLUIDS FOR COMPRESSOR DRIVEN SYSTEMS

    E-Print Network [OSTI]

    Oak Ridge National Laboratory

    FILE COPY DO NOT REWMOVE STUDY OF WORKING FLUID MIXTURES AND HIGH TEMPERATURE WORKING FLUIDS is the Step 2 product of the project "Study of working fluid mixtures and high temperature working fluids-ECONOMICAL EVALUATIONS ON COMPRESSION HEAT PUMPS WORKING WITH NONAZEOTROPIC MIXTURES OF FLUIDS 79 6.1 Introduction 79 6

  17. Work as coordination and coordination as work: A process perspective on FLOSS development projects

    E-Print Network [OSTI]

    Crowston, Kevin

    and coordination as work: A process perspective on FLOSS development projects Abstract Coordination in work teamsWork as coordination and coordination as work: A process perspective on FLOSS development projects Dipartimento Impresa e Lavoro Università degli Studi di Cassino Cassino Italy #12;Work as coordination

  18. Conversion to organic farming and consequences on work organisation and work perception

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    : Organic farming, work organization, work relationship Abstract With organic farming accounting for only 31 Conversion to organic farming and consequences on work organisation and work perception B% of the national agricultural surface area, France will not reach its conversion objective of 6% in 2012. Work

  19. Environmental embrittlement in ordered intermetallic alloys

    SciTech Connect (OSTI)

    Liu, C.T. [Oak Ridge National Lab., TN (United States); Stoloff, N.S. [Rensselaer Polytechnic Inst., Troy, NY (United States). Dept. of Materials Engineering

    1992-12-31T23:59:59.000Z

    Ordered intermetallics based on aluminides and silicides possess many promising properties for elevated-temperature applications; however, poor fracture resistance and limited fabricability restrict their use as engineering material. Recent studies have shown that environmental embrittlement is a major cause of low ductility and brittle fracture in many ordered intermetallic alloys. There are two types of environmental embrittlement observed in intermetallic alloys. One is hydrogen-induced embrittlement occurring at ambient temperatures in air. The other is oxygen-induced embrittlement in oxidizing atmospheres at elevated temperatures. In most cases, the embrittlements are due to a dynamic effect involving generation and penetration of embrittling agents (i.e., hydrogen or oxygen ) during testing. Diffusion of embrittling agents plays a dominant role in fracture of these intermetallic alloys. This chapter summarizes recent progress in understanding and reducing environmental embrittlement in these alloys.

  20. Growing quantum states with topological order

    E-Print Network [OSTI]

    Letscher, Fabian; Fleischhauer, Michael

    2015-01-01T23:59:59.000Z

    We discuss a protocol for growing states with topological order in interacting many-body systems using a sequence of flux quanta and particle insertion. We first consider a simple toy model, the superlattice Bose Hubbard model, to explain all required ingredients. Our protocol is then applied to fractional quantum Hall systems in both, continuum and lattice. We investigate in particular how the fidelity, with which a topologically ordered state can be grown, scales with increasing particle number N. For small systems exact diagonalization methods are used. To treat large systems with many particles, we introduce an effective model based on the composite fermion description of the fractional quantum Hall effect. This model also allows to take into account the effects of dispersive bands and edges in the system, which will be discussed in detail.

  1. Ordered transport and identification of particles

    DOE Patents [OSTI]

    Shera, E.B.

    1993-05-11T23:59:59.000Z

    A method and apparatus are provided for application of electrical field gradients to induce particle velocities to enable particle sequence and identification information to be obtained. Particle sequence is maintained by providing electroosmotic flow for an electrolytic solution in a particle transport tube. The transport tube and electrolytic solution are selected to provide an electroosmotic radius of >100 so that a plug flow profile is obtained for the electrolytic solution in the transport tube. Thus, particles are maintained in the same order in which they are introduced in the transport tube. When the particles also have known electrophoretic velocities, the field gradients introduce an electrophoretic velocity component onto the electroosmotic velocity. The time that the particles pass selected locations along the transport tube may then be detected and the electrophoretic velocity component calculated for particle identification. One particular application is the ordered transport and identification of labeled nucleotides sequentially cleaved from a strand of DNA.

  2. Ordered transport and identification of particles

    DOE Patents [OSTI]

    Shera, E. Brooks (Los Alamos, NM)

    1993-01-01T23:59:59.000Z

    A method and apparatus are provided for application of electrical field gradients to induce particle velocities to enable particle sequence and identification information to be obtained. Particle sequence is maintained by providing electroosmotic flow for an electrolytic solution in a particle transport tube. The transport tube and electrolytic solution are selected to provide an electroosmotic radius of >100 so that a plug flow profile is obtained for the electrolytic solution in the transport tube. Thus, particles are maintained in the same order in which they are introduced in the transport tube. When the particles also have known electrophoretic velocities, the field gradients introduce an electrophoretic velocity component onto the electroosmotic velocity. The time that the particles pass selected locations along the transport tube may then be detected and the electrophoretic velocity component calculated for particle identification. One particular application is the ordered transport and identification of labeled nucleotides sequentially cleaved from a strand of DNA.

  3. Cooperativity and Contact Order in Protein Folding

    E-Print Network [OSTI]

    Marek Cieplak

    2004-01-11T23:59:59.000Z

    The effects of cooperativity are studied within Go-Lennard-Jones models of proteins by making the contact interactions dependent on the proximity to the native conformation. The kinetic universality classes are found to remain the same as in the absence of cooperativity. For a fixed native geometry, small changes in the effective contact map may affect the folding times in a chance way and to the extent that is comparable to the shift in the folding times due to cooperativity. The contact order controlls folding scenarios: the average times necessary to bring pairs of amino acids into their near native separations depend on the sequential distances within the pairs. This dependence is largely monotonic, regardless of the cooperativity, and the dominant trend could be described by a single parameter like the average contact order. However, it is the deviations from the trend which are usually found to set the net folding times.

  4. Revising partial pre-orders with partial pre-orders: A unit-based revision framework

    E-Print Network [OSTI]

    Liu, Weiru

    Revising partial pre-orders with partial pre-orders: A unit-based revision framework Jianbing Ma1, Queen's University Belfast, Belfast BT9 5BN, UK, email: {jma03, w.liu}@qub.ac.uk 2 CRIL-CNRS, UMR 8188@cril.fr Abstract Belief revision studies strategies about how agents revise their belief states when receiving new

  5. Optical waveguides having flattened high order modes

    DOE Patents [OSTI]

    Messerly, Michael Joseph; Beach, Raymond John; Heebner, John Edward; Dawson, Jay Walter; Pax, Paul Henry

    2014-08-05T23:59:59.000Z

    A deterministic methodology is provided for designing optical fibers that support field-flattened, ring-like higher order modes. The effective and group indices of its modes can be tuned by adjusting the widths of the guide's field-flattened layers or the average index of certain groups of layers. The approach outlined here provides a path to designing fibers that simultaneously have large mode areas and large separations between the propagation constants of its modes.

  6. Technology Transfer Working Group (TTWG) | Department of Energy

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of Inspector GeneralDepartment of Energyof theRestoration atStandardsAnalysis »Technology Transfer Working

  7. Gradual Ordering in Red Abalone Nacre

    SciTech Connect (OSTI)

    Gilbert, P. U. P. A.; Metzler, Rebecca A.; Zhou, Dong; Scholl, Andreas; Doran, Andrew; Young, Anthony; Kunz, Martin; Tamura, Nobumichi; Coppersmith, Susan N.

    2008-09-03T23:59:59.000Z

    Red abalone (Haliotis rufescens) nacre is a layered composite biomineral that contains crystalline aragonite tablets confined by organic layers. Nacre is intensely studied because its biologically controlled microarchitecture gives rise to remarkable strength and toughness, but the mechanisms leading to its formation are not well understood. Here we present synchrotron spectromicroscopy experiments revealing that stacks of aragonite tablet crystals in nacre are misoriented with respect to each other. Quantitative measurements of crystal orientation, tablet size, and tablet stacking direction show that orientational ordering occurs not abruptly but gradually over a distance of 50 {micro}m. Several lines of evidence indicate that different crystal orientations imply different tablet growth rates during nacre formation. A theoretical model based on kinetic and gradual selection of the fastest growth rates produces results in qualitative and quantitative agreement with the experimental data and therefore demonstrates that ordering in nacre is a result of crystal growth kinetics and competition either in addition or to the exclusion of templation by acidic proteins as previously assumed. As in other natural evolving kinetic systems, selection of the fastest-growing stacks of tablets occurs gradually in space and time. These results suggest that the self-ordering of the mineral phase, which may occur completely independently of biological or organic-molecule control, is fundamental in nacre formation.

  8. Analysis of Modular Arithmetic Markus MullerOlm 1 and Helmut Seidl 2

    E-Print Network [OSTI]

    Seidl, Helmut

    Analysis of Modular Arithmetic Markus M?uller­Olm 1 and Helmut Seidl 2 1 Universit?at Dortmund, Fachbereich Informatik, LS 5 Baroper Str. 301, 44221 Dortmund, Germany markus.mueller­olm@cs.uni­dortmund.de 2 . In order to work with mathematical structures #12; 2 Markus M?uller­Olm and Helmut Seidl x := 2x + 1 x

  9. Speed and surge control for a low order centrifugal compressor model Jan Tommy Gravdahl and Olav Egeland

    E-Print Network [OSTI]

    Gravdahl, Jan Tommy

    Speed and surge control for a low order centrifugal compressor model Jan Tommy Gravdahl and Olav Previous work on stabilization of compressor surge is extended to include control of the angular velocity of the compressor. First a low order centrifugal compressor model is presented where the states are mass ow

  10. Mathematics & Statistics Coop Program Students from the Mathematics & Statistics Coop Program have conducted work terms in the fields of actuarial

    E-Print Network [OSTI]

    Hitchcock, Adam P.

    Mathematics & Statistics Coop Program Students from the Mathematics & Statistics Coop Program have design and data analysis, medical imaging, mathematical finance and statistical modeling. They have of Mathematics & Statistics Coop Work Terms Duties: Performed data mapping and analysis activities Derived

  11. Going To Work: Meeting the Public

    E-Print Network [OSTI]

    Hoffman, Rosemarie

    2000-07-20T23:59:59.000Z

    . It usually sets the overall tone of the work area for the day. Employees enjoy their work if they have friendly, but not inti- mate, work relationships. Other workers also want them on their team. Here is an example of a conversation between employees: Paul... sees his friend Sam before work. Paul: ?Morning, Sam. How are you doing?? Sam: ?Pretty good. And you?? Paul: ?Not bad. How?s the work going?? Sam: ?Good.? Paul: ?See you at lunch.? Sam: ?Okay. See you later.? Notice that they greet each other...

  12. A Model to Predict Work-Related Fatigue Based on Hours of Work

    E-Print Network [OSTI]

    A Model to Predict Work-Related Fatigue Based on Hours of Work Gregory D. Roach, Adam Fletcher, and Drew Dawson ROACH GD, FLETCHER A, DAWSON D. A model to predict work- related fatigue based on hours

  13. Safety Basis Requirements for Nonnuclear Facilities at Lawrence Livermore National Laboratory Site-Specific Work Smart Standards Revision 1

    SciTech Connect (OSTI)

    Beach, R; Brereton, S; Failor, R; Hildum, S; Spagnolo, S; Van Warmerdam, C

    2003-02-24T23:59:59.000Z

    This standard establishes requirements that, when coupled with Lawrence Livermore National Laboratory's (LLNL's) Integrated Safety Management System (ISMS) methods and other Work Smart Standards for assuring worker safety, assure that the impacts of nonnuclear operations authorized in LLNL facilities are well understood and controlled in a manner that protects the health of workers, the public, and the environment. All LLNL facilities shall be classified based on potential for adverse impact of operations to the health of co-located (i.e., nearby) workers and the public in accordance with this standard, Title 10 Code of Federal Regulations (10 CFR) 830, Subpart B, and Department of Energy Order (DOE O) 420.2A. This standard provides information on: Objectives; Applicability; Safety analysis requirements; Control selection and maintenance; Documentation requirements; Safety basis review, approval, and renewal; and Safety basis implementation.

  14. Analysis of Integrated Safety Management at the Activity Level...

    Broader source: Energy.gov (indexed) [DOE]

    Integrated Safety Management at the Activity Level: Work Planning and Control, Final Report Analysis of Integrated Safety Management at the Activity Level: Work Planning and...

  15. Ordering Transactions with Prediction in Distributed Object Stores Ittay Eyal1

    E-Print Network [OSTI]

    Keidar, Idit

    Nodes (ACID-RAIN). This preliminary ordering decreases abort rate, and eliminates aborts in error using the Transactional-YCSB work- loads show the scalability and benefits of ACID- RAIN. 1 Introduction. In this paper, we present ACID-RAIN -- an architecture for ACID transactions in a Resilient Archive

  16. Competition between s-wave order and d-wave order in holographic superconductors

    E-Print Network [OSTI]

    Li-Fang Li; Rong-Gen Cai; Li Li; Yong-Qiang Wang

    2014-08-12T23:59:59.000Z

    We study competition between s-wave order and d-wave order through two holographic superconductor models. We find that once the coexisting phase appears, it is always thermodynamically favored, and that the coexistence phase is narrow and one condensate tends to kill the other. The phase diagram is constructed for each model in terms of temperature and the ratio of charges of two orders. We further compare the behaviors of some thermodynamic quantities, and discuss the different aspects and identical ones between two models.

  17. Materials characterization activities for %E2%80%9CTake Our Sons&Daughters to Work Day%E2%80%9D 2013.

    SciTech Connect (OSTI)

    Mowry, Curtis Dale; Pimentel, Adam S.; Sparks, Elizabeth Schares; Hanlon, Brittany Paula

    2013-09-01T23:59:59.000Z

    We created interactive demonstration activities for Take Our Daughters&Sons to Work Day (TODSTWD) 2013 in order to promote general interest in chemistry and also generate awareness of the type of work our laboratories can perform. %E2%80%9CCurious about Mars Rover Curiosity?%E2%80%9D performed an elemental analysis on rocks brought to our lab using the same technique utilized on the planet Mars by the NASA robotic explorer Curiosity. %E2%80%9CFood is Chemistry?%E2%80%9D utilized a mass spectrometer to measure, in seconds, each participant's breath in order to identify the food item consumed for the activity. A total of over 130 children participated in these activities over a 3 hour block, and feedback was positive. This document reports the materials (including handouts), experimental procedures, and lessons learned so that future demonstrations can benefit from the baseline work performed. We also present example results used to prepare the Food activity and example results collected during the Curiosity demo.

  18. Formation of long-range ordered quantum dots arrays in amorphous matrix by ion beam irradiation

    SciTech Connect (OSTI)

    Buljan, M. [Charles University in Prague, Prague 12116 (Czech Republic); Ruder Boskovic Institute, Zagreb 10000 (Croatia); Bogdanovic-Radovic, I.; Karlusic, M.; Desnica, U. V.; Radic, N.; Dubcek, P. [Ruder Boskovic Institute, Zagreb 10000 (Croatia); Drazic, G. [Jozef Stefan Institute, Ljubljana 1000 (Slovenia); Salamon, K. [Institute of Physics, Zagreb 10000 (Croatia); Bernstorff, S. [Sincrotrone Trieste, Basovizza 34012 (Italy); Holy, V. [Charles University in Prague, Prague 12116 (Czech Republic)

    2009-08-10T23:59:59.000Z

    We demonstrate the production of a well ordered three-dimensional array of Ge quantum dots in amorphous silica matrix. The ordering is achieved by ion beam irradiation and annealing of a multilayer film. Structural analysis shows that quantum dots nucleate along the direction of the ion beam used for irradiation, while the mutual distance of the quantum dots is determined by the diffusion properties of the multilayer material rather than the distances between traces of ions that are used for irradiation.

  19. Seismic imaging using higher order statistics

    E-Print Network [OSTI]

    Srinivasan, Karthik

    1999-01-01T23:59:59.000Z

    weather, Gaussian noise example: (a) measurement x(t), (b) measurement y(t), (c) cross-correlation, (d) coherence-correlation, (e) bispectral-correlation, (f) bicoherence-correlation . . 21 Non-Gaussian noise example: (a) measurement x(t), (b... in the later sections. 2. SECOND ORDER STATISTICS 2. 1. Cross-correlation Given two real random signals x(t), y(t), and their Fourier transforms X(tu), Y(tu), the cross-correlation is given by v (r) = E[x(t)y(t+r)] = F '[P (m)], where F' is the Fourier...

  20. Higher--Order Lagrangian Perturbation Theory

    E-Print Network [OSTI]

    T. Buchert

    1994-03-11T23:59:59.000Z

    Fundamental assumptions which form the basis of models for large-scale structure in the Universe are sketched in light of a Lagrangian description of inhomogeneities. This description is introduced for Newtonian self-gravitating flows. On its basis a Lagrangian perturbation approach is discussed and compared with the standard Eulerian theory of gravitational instability. The performance of Lagrangian perturbation solutions up to the third order is demonstrated in comparison with numerical N-body simulations. First results of this comparison are presented for large scales (PM-code) and for small scales (tree-code).

  1. O:\ELECTRIC\ORDERS\EA-223.PDF

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of EnergyEnergyENERGY TAXBalanced ScorecardReactor Technology SubcommitteeWilliamsOn April 1, Order No.CMS

  2. Guidance document for revision of DOE Order 5820.2A, Radioactive Waste Technical Support Program. Revision 1

    SciTech Connect (OSTI)

    Kudera, D.E.; McMurtrey, C.D.; Meagher, B.G.

    1993-04-01T23:59:59.000Z

    This document provides guidance for the revision of DOE Order 5820.2A, ``Radioactive Waste Management.`` Technical Working Groups have been established and are responsible for writing the revised order. The Technical Working Groups will use this document as a reference for polices and procedures that have been established for the revision process. The overall intent of this guidance is to outline how the order will be revised and how the revision process will be managed. In addition, this document outlines technical issues considered for inclusion by a Department of Energy Steering Committee.

  3. Computational Analysis of Merchant Marine GPS Data* CASOS Technical Report

    E-Print Network [OSTI]

    Sadeh, Norman M.

    . Keywords: Geospatial analysis, network analysis, clustering * This work was supported in partComputational Analysis of Merchant Marine GPS Data* CASOS Technical Report George B. Davis ISRI - Institute for Software Research International CASOS - Center for Computational Analysis

  4. Infinitely robust order and local order-parameter tulips in Apollonian networks with quenched disorder

    E-Print Network [OSTI]

    Kaplan, C. Nadir

    For a variety of quenched random spin systems on an Apollonian network, including ferromagnetic and antiferromagnetic bond percolation and the Ising spin glass, we find the persistence of ordered phases up to infinite ...

  5. Dissolution of ordered precipitates under ion irradiation

    SciTech Connect (OSTI)

    Camus, E.; Bourdeau, F.; Abromeit, C.; Wanderka, N.; Wollenberger, H. [Hahn-Meitner-Institut Berlin GmbH (Germany)

    1995-09-01T23:59:59.000Z

    The stability of the ordered {gamma}{prime} precipitates under 300-keV Ni{sup +} irradiation was investigated between room temperature and 623 K. The two competing mechanisms of destabilization by cascade producing irradiation, i.e. disordering and dissolution of the {gamma}{prime} precipitates in Nimonic PE16 alloy, has been studied separately by electron microscopy and field-ion microscopy with atom probe. At high temperatures, the precipitates are stable. At intermediate temperatures, the precipitates dissolve by ballistic mixing into the matrix, but the interface is restored by the radiation-enhanced atomic jumps. The order in the precipitates remains stable. At low temperatures, the precipitates are dissolved by atomic mixing. The dissolution proceeds in a diffusional manner with a diffusion coefficient normalized by the displacement rate D/K = 0.75 nm{sup 2}dpa{sup {minus}1}. The precipitates become disordered by a fluence of 0.1 dpa, whereas precipitate dissolution needs much higher fluences.

  6. Ordering of carbon atoms in boron carbide structure

    SciTech Connect (OSTI)

    Ponomarev, V. I., E-mail: i2212@yandex.ru; Kovalev, I. D.; Konovalikhin, S. V.; Vershinnikov, V. I. [Russian Academy of Sciences, Institute of Structural Macrokinetics and Materials Science (Russian Federation)

    2013-05-15T23:59:59.000Z

    Boron carbide crystals have been obtained in the entire compositional range according to the phase diagram by self-propagating high-temperature synthesis (SHS). Based on the results of X-ray diffraction investigations, the samples were characterized by the unit-cell metric and reflection half-width in the entire range of carbon concentrations. A significant spread in the boron carbide unit-cell parameters for the same carbon content is found in the data in the literature; this spread contradicts the structural concepts for covalent compounds. The SHS samples have not revealed any significant spread in the unit-cell parameters. Structural analysis suggests that the spread of parameters in the literary data is related to the unique process of ordering of carbon atoms in the boron carbide structure.

  7. Mobile machine hazardous working zone warning system

    DOE Patents [OSTI]

    Schiffbauer, W.H.; Ganoe, C.W.

    1999-08-17T23:59:59.000Z

    A warning system is provided for a mobile working machine to alert an individual of a potentially dangerous condition in the event the individual strays into a hazardous working zone of the machine. The warning system includes a transmitter mounted on the machine and operable to generate a uniform magnetic field projecting beyond an outer periphery of the machine in defining a hazardous working zone around the machine during operation. A receiver, carried by the individual and activated by the magnetic field, provides an alarm signal to alert the individual when he enters the hazardous working zone of the machine. 3 figs.

  8. Mobile machine hazardous working zone warning system

    DOE Patents [OSTI]

    Schiffbauer, William H. (Connellsville, PA); Ganoe, Carl W. (Pittsburgh, PA)

    1999-01-01T23:59:59.000Z

    A warning system is provided for a mobile working machine to alert an individual of a potentially dangerous condition in the event the individual strays into a hazardous working zone of the machine. The warning system includes a transmitter mounted on the machine and operable to generate a uniform magnetic field projecting beyond an outer periphery of the machine in defining a hazardous working zone around the machine during operation thereof. A receiver, carried by the individual and activated by the magnetic field, provides an alarm signal to alert the individual when he enters the hazardous working zone of the machine.

  9. Working With the Federal Fleets (Presentation)

    SciTech Connect (OSTI)

    Daley, R.

    2010-10-25T23:59:59.000Z

    Presentation about federal fleet data, working with the federal government, and results from a survey of Clean Cities coordinators about their experiences with regulated fleets.

  10. Work For Others Agreements | Partnerships | ORNL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Agreement science Work For Others (WFO) agreements provide an excellent way for companies, universities, and other entities to access the unique facilities, technologies, and...

  11. High Temperature Membrane Working Group Meeting Minutes

    Broader source: Energy.gov (indexed) [DOE]

    membranes. He discussed the motivation for the work; electrochemistry and mechanical loads co-exist but are usually modeled separately. Additionally, there is a concern...

  12. Federal Utility Partnership Working Group Participants | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    in the Federal Utility Partnership Working Group or engaged in a utility energy service contract project. General Services Administration National Aeronautics and Space...

  13. Federal Utility Partnership Working Group Participants

    Broader source: Energy.gov [DOE]

    The following Federal agencies have participated in the Federal Utility Partnership Working Group or engaged in a utility energy service contract project.

  14. Room temperature and productivity in office work

    E-Print Network [OSTI]

    Seppanen, O.; Fisk, W.J.; Lei, Q.H.

    2006-01-01T23:59:59.000Z

    2003. Proceedings of Healthy Buildings 2003 Conference.building, Proceedings of Healthy Buildings 2003 Conference.work. Proceedings of Healthy Buildings Conference 2003.

  15. Better Buildings Neighborhood Program Working with Utilities...

    Broader source: Energy.gov (indexed) [DOE]

    August 2, 2012 Better Buildings Neighborhood Program Working with Utilities Peer Exchange Call: Effective Strategies for Participating in Utility Planning Call Slides and...

  16. How Fusion Energy Works | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Fuel Cells Work 30 likes Fuel cells produce electrical power without any combustion and can provide power for virtually any application -- from cars and buses to commercial...

  17. WIPP Facility Work Plan for Solid Waste Management Units

    SciTech Connect (OSTI)

    Washington TRU Solutions LLC

    2000-02-25T23:59:59.000Z

    This Facility Work Plan (FWP) has been prepared as required by Module VII,Section VII.M.1 of the Waste Isolation Pilot Plant (WIPP) Hazardous Waste Permit, NM4890139088-TSDF (the Permit); (NMED, 1999a). This work plan describes the programmatic facility-wide approach to future investigations at Solid Waste Management Units (SWMUs) and Areas of Concern (AOCs) specified in the Permit. This FWP addresses the current Permit requirements. It uses the results of previous investigations performed at WIPP and expands the investigations as required by the Permit. As an alternative to the Resource Conservation and Recovery Act (RCRA) Facility Investigation (RFI) specified in Module VII of the Permit, current New Mexico Environment Department (NMED) guidance identifies an Accelerated Corrective Action Approach (ACAA) that may be used for any SWMU or AOC (NMED, 1998). This accelerated approach is used to replace the standard RFI Work Plan and Report sequence with a more flexible decision-making approach. The ACAA process allows a Facility to exit the schedule of compliance contained in the Facilitys Hazardous and Solid Waste Amendments (HSWA) permit module and proceed on an accelerated time frame. Thus, the ACAA process can be entered either before or after an RFI Work Plan. According to NMEDs guidance, a facility can prepare an RFI Work Plan or Sampling and Analysis Plan (SAP) for any SWMU or AOC (NMED, 1998). Based on this guidance, a SAP constitutes an acceptable alternative to the RFI Work Plan specified in the Permit. The scope of work for the RFI Work Plan or SAP is being developed by the Permittees. The final content of the RFI Work Plan or SAP will be coordinated with the NMED for submittal on May 24, 2000. Specific project-related planning information will be included in the RFI Work Plan or SAP. The SWMU program at WIPP began in 1994 under U.S. Environmental Protection Agency (EPA) regulatory authority. NMED subsequently received regulatory authority from EPA. A Phase I RFI was completed at WIPP as part of a Voluntary Release Assessment (VRA). The risk-based decision criteria recommended by EPA for the VRA were contained in a proposed Corrective Action rule for SWMUs (EPA, 1990). EPA Region VI has issued new risk-based screening criteria applicable to the WIPP SWMUs and AOCs.

  18. Energy Advisors at Work: Charity Work Practices to Support People in Fuel Poverty

    E-Print Network [OSTI]

    Energy Advisors at Work: Charity Work Practices to Support People in Fuel Poverty Joel E. Fischer present an ethnographic study of energy advisors working for a charity that provides support, particularly, interactional work of energy advisors and clients during home visits, supplemented with interviews

  19. 2014.12-Web of ScienceRefWorks [] RefWorks

    E-Print Network [OSTI]

    Miyashita, Yasushi

    2014.12- Web of ScienceRefWorks [] 1 RefWorks Web of Science CORE COLLECTION [] TEL: 03-5841-2649:22649 : literacy@lib.u-tokyo.ac.jp Web of Science RefWorks UTokyo Article Link p. 3-4 p. 5 p. 3 p. 6 RefWorks p. 6 Web of Science

  20. Working for a healthier tomorrow: a Review of the health of Britain's working age population

    E-Print Network [OSTI]

    Mumby, Peter J.

    of her clinical work sprang a research interest in Systemic Sclerosis, a disorder for which little couldWorking for a healthier tomorrow: a Review of the health of Britain's working age population University followed by a diploma in medical social work. She entered medical school as a mature student

  1. Ruth Yeoman Meaningful Work and Workplace Democracy Meaningful Work and Workplace Democracy

    E-Print Network [OSTI]

    Sheldon, Nathan D.

    Contents Page Number Abstract 8 Introduction 9 Chapter One Meaningful Work as a Fundamental Human Need 1Ruth Yeoman Meaningful Work and Workplace Democracy Page 1 Meaningful Work and Workplace Democracy;Ruth Yeoman Meaningful Work and Workplace Democracy Page 2 Declaration I hereby declare that all

  2. How to get mechanical work from a capacitor and two batteries

    E-Print Network [OSTI]

    Miranda, E N

    2012-01-01T23:59:59.000Z

    The work done by a parallel plate capacitor is evaluated when the plate separation is changed. Two cases are considered: 1) the capacitor has a constant charge; 2) the capacitor is at constant voltage. The net work is calculated when the device follows a closed cycle in the charge-voltage space. For certain conditions a net mechanical work can be obtained from the cycling capacitor. The analysis is simple enough to be explained in a general physics course.

  3. How to get mechanical work from a capacitor and two batteries

    E-Print Network [OSTI]

    E. N. Miranda

    2012-08-10T23:59:59.000Z

    The work done by a parallel plate capacitor is evaluated when the plate separation is changed. Two cases are considered: 1) the capacitor has a constant charge; 2) the capacitor is at constant voltage. The net work is calculated when the device follows a closed cycle in the charge-voltage space. For certain conditions a net mechanical work can be obtained from the cycling capacitor. The analysis is simple enough to be explained in a general physics course.

  4. Accelerated gravitational-wave parameter estimation with reduced order modeling

    E-Print Network [OSTI]

    Priscilla Canizares; Scott E. Field; Jonathan Gair; Vivien Raymond; Rory Smith; Manuel Tiglio

    2015-01-27T23:59:59.000Z

    Inferring the astrophysical parameters of coalescing compact binaries is a key science goal of the upcoming advanced LIGO-Virgo gravitational-wave detector network and, more generally, gravitational-wave astronomy. However, current parameter estimation approaches for such scenarios can lead to computationally intractable problems in practice. Therefore there is a pressing need for new, fast and accurate Bayesian inference techniques. In this letter we demonstrate that a reduced order modeling approach enables rapid parameter estimation studies. By implementing a reduced order quadrature scheme within the LIGO Algorithm Library, we show that Bayesian inference on the 9-dimensional parameter space of non-spinning binary neutron star inspirals can be sped up by a factor of 30 for the early advanced detectors' configurations. This speed-up will increase to about $150$ as the detectors improve their low-frequency limit to 10Hz, reducing to hours analyses which would otherwise take months to complete. Although these results focus on gravitational detectors, the techniques are broadly applicable to any experiment where fast Bayesian analysis is desirable.

  5. Ordered dust structures in a glow discharge

    SciTech Connect (OSTI)

    Karasev, V. Yu., E-mail: plasmadust@yandex.ru; Ivanov, A. Yu.; Dzlieva, E. S.; Eikhval'd, A. I. [St. Petersburg State University, Institute of Physics (Russian Federation)

    2008-02-15T23:59:59.000Z

    Highly ordered three-dimensional dust structures are created in a striated glow discharge, and their horizontal cross-sectional images are analyzed. Calculated correlation functions, local correlation parameters, and corresponding approximations are used to classify the state of a structure according to the Kosterlitz-Thouless-Halperin-Nelson-Young (KTHNY) two-dimensional melting theory and a phenomenological approach. An orientational map based on an orientational parameter is proposed to expose domains in a cross section of a structure. It is shown that a plasma crystal is a polycrystal consisting of hexagonal domains (crystallites). Thermophoretic forces are used to create corners of various angles in the perimeter of the structure. Transition between hexagonal and square cell shapes is observed.

  6. Modulated order in classical magnetoelastic chains

    SciTech Connect (OSTI)

    Marchand, M.; Caille, A.

    1988-09-01T23:59:59.000Z

    We investigate the nature of modulated lattice distortions that can occur in a two-dimensional array of classical magnetoelastic chains coupled together by elastic interactions only. The phase diagram for the lattice structure is obtained by numerically minimizing a one-dimensional, temperature-dependent, effective-free-energy functional of the elastic variables. At zero temperature, only phases where the winding number is uniquely defined are found, and the transitions among these phases are suggestive of a complete devil's-staircase behavior. These numerical results are consistent with N. Ishimura's analytic demonstration that such a staircase exists (J. Phys. Soc. Jpn. 54, 4752 (1985)). At finite temperatures, phases where the winding number is not uniquely defined are found and, in addition, first- and second-order transitions appear. Also of interest are superdegenerate lines where the equilibrium phase is composed of noninteracting solitons of zero energy.

  7. American Power: Order (2010-CE-0911) | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Power: Order (2010-CE-0911) American Power: Order (2010-CE-0911) October 5, 2010 DOE issued an Order and entered into a Compromise Agreement with American Power Solutions, Inc....

  8. Quarterly Analysis Review February 2015 | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    The Quarterly Analysis Review (QAR) surveys both work supported by the Vehicle Technologies Office Analysis Program within the broader context of energy and automotive U.S. and...

  9. Hydrogen Storage Systems Analysis Meeting: Summary Report, March...

    Broader source: Energy.gov (indexed) [DOE]

    Meeting: Summary Report, March 29, 2005 Hydrogen Storage Systems Analysis Meeting: Summary Report, March 29, 2005 This report highlights DOE's systems analysis work related to...

  10. Using the Web for Name Authority Work

    E-Print Network [OSTI]

    Whittaker, Beth M.; Spillane, Jodi Lynn

    2001-01-01T23:59:59.000Z

    While many catalogers are using the Web to find the information they need to perform authority work quickly and accurately, the full potential of the Web to assist catalogers in name authority work has yet to be realized. The ever-growing nature...

  11. RISK ASSESSMENT FORM FIELD / LOCATION WORK

    E-Print Network [OSTI]

    Lummaa, Virpi

    the work. Detail such risks in the final section. ENVIRONMENT The environment always represents a safety weather, illness, hypothermia, assault, getting lost. Is the risk high/medium/low? CONTROL MEASURES environment trained leaders accompany the trip refuge is available work in outside organisations is subject

  12. Fusion Technology Working Group Presented by

    E-Print Network [OSTI]

    Abdou, Mohamed

    Snowmass Fusion Technology Working Group Summary Presented by M. Abdou, S. Milora Snowmass July 23, 1999 #12;Technology Working Group Subgroup # 1 Subgroup # 2 Solid Walls Ulrickson / Mattas Liquid Walls / Ying Chamber Technology Abdou / Ulrickson Heating/CD/Fueling Swain / Temkin Magnets Schultz / Woolley

  13. From Higher Education To Work In West

    E-Print Network [OSTI]

    Mohaghegh, Shahab

    From Higher Education To Work In West Virginia 2008 Summary Results For Work Participation Achievement, Tuition Assistance, and Nearby States March 2010 Prepared for the West Virginia Higher Education Higher Education Policy Commission. Opinions expressed herein are the responsibility of the authors. #12

  14. From Higher Education To Work In West

    E-Print Network [OSTI]

    Mohaghegh, Shahab

    From Higher Education To Work In West Virginia 2007 Summary Results For Work Participation Prepared for the West Virginia Higher Education Policy Commission By George W. Hammond, Associate Director This research was conducted under contract with the West Virginia Higher Education Policy Commission. Opinions

  15. Lone Working Procedure Procedure Revision No

    E-Print Network [OSTI]

    Glasgow, University of

    , Heads of School, Directors of Research Institutes and Heads of Service 5.2 Line Managers 5.3 Health legislation in respect of working alone, the Management of Health and Safety at Work Regulations 1999' risks that employees might face in the course of their duties. The Health & Safety Executive (HSE) has

  16. NZER WORKING PAPER SERIES BOLIVIA'S ECONOMIC CRISIS

    E-Print Network [OSTI]

    NZER WORKING PAPER SERIES BOLIVIA'S ECONOMIC CRISIS Juan Antonio Morales Jeffrey Sachs Working Paper No. 2620 NATIONAL BUREAU OF ECONOMIC RESEARCH 1050 Massachusetts Avenue Cambridge, MA 02138 of a monograph on "Bolivian Economic Performance and Foreign Debt", undertaken as part of the NBER project

  17. Earnings inequality and in-work-poverty

    E-Print Network [OSTI]

    Gutirrez Palacios, Rodolfo; Guilln Rodrguez, Ana Marta; Pea-Casas, Ramn

    2009-01-01T23:59:59.000Z

    . The first deals with our level of knowledge about the impact of economic globalization on earnings inequalities. Sections 2 and 3 are devoted to the dynamics and present situation of the incidence of low paid work and in-work poverty respectively. Section 4...

  18. Working Copy Specification E-I-474

    E-Print Network [OSTI]

    Working Copy Specification E-I-474 Revision Number 0 Revision Date 07/30/07 ECO Number 11818.7 Packaging and Shipping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 3.8 Final #12;Working Copy E-I-474, Rev. 0 SPECIFICATION E-X-XXX RECORD OF REVISION ECO/REV NUMBER DATE PAGES

  19. Caringscapes: experiences of caring and working

    E-Print Network [OSTI]

    McKie, Linda; Gregory, Susan; Bowlby, Sophie

    There is growing interest in ways in which people combine working with caring, and what can be done to make the balance of work and care more manageable. In this paper, Linda McKie, Susan Gregory and Sophia Bowlby explore experiences of caring...

  20. 2007 WORK PROGRAMME COOPERATION THEME 5: ENERGY

    E-Print Network [OSTI]

    Meju, Max

    on the proposed hydrogen and fuel cell JTI will have a significant effect on the overall content of this work of contents) #12;3 2007 WORK PROGRAMME COOPERATION THEME 5: ENERGY Objective: Adapting the current fossil-fuel based energy system into a more sustainable one, less dependent of imported fuels, based on a diverse

  1. Second Proof Work, Power, and Energy

    E-Print Network [OSTI]

    Kostic, Milivoje M.

    ) energy sources, such as solar energy, wind, water flows, ocean and tidal waves, and biomassSecond Proof Work, Power, and Energy M. KOSTIC Northern Illinois University DeKalb, Illinois, United States 1. Basic Concepts 2. Forms, Classifications, and Conservation of Energy 3. Work

  2. CATERING ORDER;SA 4500-CCC

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-Series to someone6Energy, science, andAnalysis ofLink4500-CCC (4-2015) Supersedes

  3. Translation invariant time-dependent massive gravity: Hamiltonian analysis

    E-Print Network [OSTI]

    Jihad Mourad; Karim Noui; Danile A. Steer

    2014-07-10T23:59:59.000Z

    The canonical structure of the massive gravity in the first order moving frame formalism is studied. We work in the simplified context of translation invariant fields, with mass terms given by general non-derivative interactions, invariant under the diagonal Lorentz group, depending on the moving frame as well as a fixed reference frame. We prove that the only mass terms which give 5 propagating degrees of freedom are the dRGT mass terms, namely those which are linear in the lapse. We also complete the Hamiltonian analysis with the dynamical evolution of the system.

  4. Low work function, stable thin films

    DOE Patents [OSTI]

    Dinh, Long N. (Concord, CA); McLean, II, William (Oakland, CA); Balooch, Mehdi (Berkeley, CA); Fehring, Jr., Edward J. (Dublin, CA); Schildbach, Marcus A. (Livermore, CA)

    2000-01-01T23:59:59.000Z

    Generation of low work function, stable compound thin films by laser ablation. Compound thin films with low work function can be synthesized by simultaneously laser ablating silicon, for example, and thermal evaporating an alkali metal into an oxygen environment. For example, the compound thin film may be composed of Si/Cs/O. The work functions of the thin films can be varied by changing the silicon/alkali metal/oxygen ratio. Low work functions of the compound thin films deposited on silicon substrates were confirmed by ultraviolet photoelectron spectroscopy (UPS). The compound thin films are stable up to 500.degree. C. as measured by x-ray photoelectron spectroscopy (XPS). Tests have established that for certain chemical compositions and annealing temperatures of the compound thin films, negative electron affinity (NEA) was detected. The low work function, stable compound thin films can be utilized in solar cells, field emission flat panel displays, electron guns, and cold cathode electron guns.

  5. INITIAL -COMPACTNESS IN LINEARLY ORDERED SPACES PAOLO LIPPARINI

    E-Print Network [OSTI]

    Lipparini, Paolo

    equipped with a linear order and with a base of order-convex sets. See, e. g., Bennet and Lutzer [BL

  6. Energy Department Awards First Major Task Order Under Streamlined...

    Energy Savers [EERE]

    First Major Task Order Under Streamlined Contracting System Energy Department Awards First Major Task Order Under Streamlined Contracting System October 17, 2005 - 11:59am Addthis...

  7. New Executive Order Establishes a Federal Flood Risk Management...

    Energy Savers [EERE]

    New Executive Order Establishes a Federal Flood Risk Management Standard New Executive Order Establishes a Federal Flood Risk Management Standard February 5, 2015 - 10:55am Addthis...

  8. President Issues Executive Order Aimed at Preparing for the Impacts...

    Broader source: Energy.gov (indexed) [DOE]

    President Issues Executive Order Aimed at Preparing for the Impacts of Climate Change; Tribal Leaders to Serve on Task Force President Issues Executive Order Aimed at Preparing for...

  9. OVERVIEW OF EXECUTIVE ORDER 13XXX Federal Leadership in Environmental...

    Office of Environmental Management (EM)

    OVERVIEW OF EXECUTIVE ORDER 13XXX Federal Leadership in Environmental, Energy and Economic Performance OVERVIEW OF EXECUTIVE ORDER 13XXX Federal Leadership in Environmental, Energy...

  10. FY 2006 Executive Order 13101 Report: Department of Energy Affirmative...

    Broader source: Energy.gov (indexed) [DOE]

    6 Executive Order 13101 Report: Department of Energy Affirmative Procurement and Recycling Fiscal Year 2006 Report, 31207 FY 2006 Executive Order 13101 Report: Department of...

  11. Predicting and Detecting Emerging Cyberattack Patterns Using StreamWorks

    SciTech Connect (OSTI)

    Chin, George; Choudhury, Sutanay; Feo, John T.; Holder, Larry

    2014-06-30T23:59:59.000Z

    The number and sophistication of cyberattacks on industries and governments have dramatically grown in recent years. To counter this movement, new advanced tools and techniques are needed to detect cyberattacks in their early stages such that defensive actions may be taken to avert or mitigate potential damage. From a cybersecurity analysis perspective, detecting cyberattacks may be cast as a problem of identifying patterns in computer network traffic. Logically and intuitively, these patterns may take on the form of a directed graph that conveys how an attack or intrusion propagates through the computers of a network. Such cyberattack graphs could provide cybersecurity analysts with powerful conceptual representations that are natural to express and analyze. We have been researching and developing graph-centric approaches and algorithms for dynamic cyberattack detection. The advanced dynamic graph algorithms we are developing will be packaged into a streaming network analysis framework known as StreamWorks. With StreamWorks, a scientist or analyst may detect and identify precursor events and patterns as they emerge in complex networks. This analysis framework is intended to be used in a dynamic environment where network data is streamed in and is appended to a large-scale dynamic graph. Specific graphical query patterns are decomposed and collected into a graph query library. The individual decomposed subpatterns in the library are continuously and efficiently matched against the dynamic graph as it evolves to identify and detect early, partial subgraph patterns. The scalable emerging subgraph pattern algorithms will match on both structural and semantic network properties.

  12. Optimization Online - Solution Analysis for the Pseudomonotone ...

    E-Print Network [OSTI]

    Yang Wei Hong

    2014-11-18T23:59:59.000Z

    Nov 18, 2014 ... Solution Analysis for the Pseudomonotone Second-order Cone Linear Complementarity Problem. Yang Wei Hong(whyang ***at***...

  13. Technical Work Plan for: Fracture and Lithophysal Studies

    SciTech Connect (OSTI)

    n

    2006-09-11T23:59:59.000Z

    The primary objective of the work scope described in this technical work plan (TWP) is to enhance the descriptions of fracture and lithophysal parameters for the repository host horizon (RHH) over the repository footprint utilizing a predictive model. This work is planned to address U.S. Nuclear Regulatory Commission (NRC) additional information needs (AINs) associated with the Structural Deformation and Seismicity (SDS) Key Technical Issues (KTI) agreement SDS 3.03 (Schlueter 2000 [DIRS 166615]). The results of the planned work are expected to enhance the technical basis and confirm the results of the fracture analyses presented in ''Drift Degradation Analysis'' (BSC 2004 [DIRS 166107], Section 6.1.6). This model is not intended to provide an alternative for the unsaturated zone and saturated zone flow and transport models currently used by the Yucca Mountain Project (YMP). Nor are the outputs of this model intended to address the SDS 3.03 AINs related to the unsaturated zone and saturated zone flow and transport models.

  14. Internal temperature monitor for work pieces

    DOE Patents [OSTI]

    Berthold, J.W.

    1993-07-13T23:59:59.000Z

    A method and apparatus for measuring the internal temperature of a work piece comprises an excitation laser for generating laser pulses which are directed through a water cooled probe, and in an optical fiber, to a first surface of the work piece. The laser is of sufficient intensity to ablate the surface of the work piece, producing a displacement and a resulting ultrasonic pulse which propagates within the thickness of the work piece to an opposite surface. The ultrasonic pulse is reflected from the opposite surface and returns to the first surface to create a second displacement. A second continuous laser also shines its light through an optical fiber in the probe into the first surface and is used in conjunction with signal processing equipment to measure the time between the first and second displacements. This time is proportional to the time-of-flight of the ultrasonic pulse in the work piece which, with a known or detected thickness of the work piece, can be used to calculate the internal temperature of the work piece.

  15. The FERC EBB working group: Put a fork in us, we`re done

    SciTech Connect (OSTI)

    White, B.

    1995-12-31T23:59:59.000Z

    The Federal Energy Regulatory Commission`s (FERC) Order 636 required interstate pipelines to set up electronic bulletin boards for trading released capacity. Their goal was to foster an efficient and competitive secondary market for pipeline capacity. Five working groups were created to address the issues of core capacity, operationally available capacity, customer specific gas flows, communications protocols/operational logistics, and common codes. This paper describes the scope of the working groups and their accomplishments.

  16. Measurement of work function in CF? gas

    E-Print Network [OSTI]

    Wolfe, Ian C

    2010-01-01T23:59:59.000Z

    CF4 gas is useful in many applications, especially as a drift gas in particle detection chambers. In order to make accurate measurements of incident particles the properties of the drift gas must be well understood. An ...

  17. Estimating the spectral indices of correlated astrophysical foregrounds by a second-order statistical approach

    E-Print Network [OSTI]

    A. Bonaldi; L. Bedini; E. Salerno; C. Baccigalupi; G. De Zotti

    2006-09-26T23:59:59.000Z

    We present the first tests of a new method, the Correlated Component Analysis (CCA) based on second-order statistics, to estimate the mixing matrix, a key ingredient to separate astrophysical foregrounds superimposed to the Cosmic Microwave Background (CMB). In the present application, the mixing matrix is parameterized in terms of the spectral indices of Galactic synchrotron and thermal dust emissions, while the free-free spectral index is prescribed by basic physics, and is thus assumed to be known. We consider simulated observations of the microwave sky with angular resolution and white stationary noise at the nominal levels for the PLANCK satellite, and realistic foreground emissions, with a position dependent synchrotron spectral index. We work with two sets of PLANCK frequency channels: the low frequency set, from 30 to 143 GHz, complemented with the Haslam 408 MHz map, and the high frequency set, from 217 to 545 GHz. The concentration of intense free-free emission on the Galactic plane introduces a steep dependence of the spectral index of the global Galactic emission with Galactic latitude, close to the Galactic equator. This feature makes difficult for the CCA to recover the synchrotron spectral index in this region, given the limited angular resolution of PLANCK, especially at low frequencies. A cut of a narrow strip around the Galactic equator (|b|<3 deg), however, allows us to overcome this problem. We show that, once this strip is removed, the CCA allows an effective foreground subtraction, with residual uncertainties inducing a minor contribution to errors on the recovered CMB power spectrum.

  18. Generation of higher order nonclassical states via interaction of intense electromagnetic field with third order nonlinear medium

    E-Print Network [OSTI]

    Anirban Pathak

    2007-02-24T23:59:59.000Z

    Interaction of intense laser beam with an inversion symmetric third order nonlinear medium is modeled as a quartic anharmonic oscillator. A first order operator solution of the model Hamiltonian is used to study the possibilities of generation of higher order nonclassical states. It is found that the higher order squeezed and higher order antibunched states can be produced by this interaction. It is also shown that the higher order nonclassical states may appear separately, i.e. a higher order antibunched state is not essentially higher order squeezed state and vice versa.

  19. Representations of groups of order 32

    E-Print Network [OSTI]

    Ruud, Paul Gordon

    2012-06-07T23:59:59.000Z

    8 7 1 2 4 3 6 5 7 8 Z 1 3 4 7 8 5 6 3 4 1 2 & 7 6 5 4 3 2 1 (Step 3) Obtain quadrant III by operating on quadrant I. In computing quadrant III, the following products must be solved: a3(1;al ' 2' 1 2 ' 1 2 '*1' 2' 1 2 ' Za3)(1; l, a2' ala2...), (alaZa3)(1;al, aZ, alaZ). Observe that all elements commute with 1 and al thus leaving columns 1 and Z unchanged. But col- umns 3 and 4 are interchanged since aZa3+a3aZ. 25 (Step 4) Obtain quadrant IV from quadrant II. Using the system of analysis...

  20. The work function of elastic solids

    E-Print Network [OSTI]

    Jozsef Garai; Alexandre Laugier

    2005-11-02T23:59:59.000Z

    In solid phase the pressure correlates to the elastic related volume change while the temperature to the thermal related volume change. These volume changes are not compatible with the exception of constant volume condition when the expanded volume converts completely compressed volume. Separating the thermal and elastic related volume changes the work functions for each of the thermodynamic conditions are derived. Based on theoretical consideration it is suggested that the thermal related volume change do not result mechanical work. Homogeneous model, both the system and the surrounding have the same phase, can completely explain the lack of the thermal related work and provide a self-consistent thermodynamic description for the elastic solids.