Sample records for analysis tool cvat

  1. Carbon Value Analysis Tool (CVAT) | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual Siteof EnergyInnovation inOpen EnergyCallawayCapara Energia S ACarbon

  2. Figure 2 Analysis Tool Interface Level-1 / PBBT Analysis Tool

    E-Print Network [OSTI]

    Figure 2 ­ Analysis Tool Interface Level-1 / PBBT Analysis Tool Introduction The Level-1/PBBT Analysis Tool (LPAT) was designed to assist in the analysis of North American Standard Level-1 Inspection. The data incorporated into the tool includes the results of Level-1 inspections with accompanying PBBT test

  3. Frequency Response Analysis Tool

    SciTech Connect (OSTI)

    Etingov, Pavel V.; Kosterev, Dmitry; Dai, T.

    2014-12-31T23:59:59.000Z

    Frequency response has received a lot of attention in recent years at the national level, which culminated in the development and approval of North American Electricity Reliability Corporation (NERC) BAL-003-1 Frequency Response and Frequency Bias Setting Reliability Standard. This report is prepared to describe the details of the work conducted by Pacific Northwest National Laboratory (PNNL) in collaboration with the Bonneville Power Administration and Western Electricity Coordinating Council (WECC) Joint Synchronized Information Subcommittee (JSIS) to develop a frequency response analysis tool (FRAT). The document provides the details on the methodology and main features of the FRAT. The tool manages the database of under-frequency events and calculates the frequency response baseline. Frequency response calculations are consistent with frequency response measure (FRM) in NERC BAL-003-1 for an interconnection and balancing authority. The FRAT can use both phasor measurement unit (PMU) data, where available, and supervisory control and data acquisition (SCADA) data. The tool is also capable of automatically generating NERC Frequency Response Survey (FRS) forms required by BAL-003-1 Standard.

  4. Nonstandard Tools for Nonsmooth Analysis

    E-Print Network [OSTI]

    S. S. Kutateladze

    2012-06-11T23:59:59.000Z

    This is an overview of the basic tools of nonsmooth analysis which are grounded on nonstandard models of set theory. By way of illustration we give a criterion for an infinitesimally optimal path of a general discrete dynamic system.

  5. Buildings Performance Database Analysis Tools | Department of...

    Broader source: Energy.gov (indexed) [DOE]

    Performance Database Analysis Tools The Buildings Performance Database offers several analysis tools for exploring building data and forecasting financial and energy savings,...

  6. VCAT: Visual Crosswalk Analysis Tool

    SciTech Connect (OSTI)

    Cleland, Timothy J. [Los Alamos National Laboratory; Forslund, David W. [Los Alamos National Laboratory; Cleland, Catherine A. [Los Alamos National Laboratory

    2012-08-31T23:59:59.000Z

    VCAT is a knowledge modeling and analysis tool. It was synthesized from ideas in functional analysis, business process modeling, and complex network science. VCAT discovers synergies by analyzing natural language descriptions. Specifically, it creates visual analytic perspectives that capture intended organization structures, then overlays the serendipitous relationships that point to potential synergies within an organization or across multiple organizations.

  7. Analysis Models and Tools: Systems Analysis of Hydrogen and Fuel...

    Office of Environmental Management (EM)

    and Fuel Cells Analysis Models and Tools: Systems Analysis of Hydrogen and Fuel Cells The Fuel Cell Technologies Office's systems analysis program uses a consistent set of models...

  8. ADVANCED POWER SYSTEMS ANALYSIS TOOLS

    SciTech Connect (OSTI)

    Robert R. Jensen; Steven A. Benson; Jason D. Laumb

    2001-08-31T23:59:59.000Z

    The use of Energy and Environmental Research Center (EERC) modeling tools and improved analytical methods has provided key information in optimizing advanced power system design and operating conditions for efficiency, producing minimal air pollutant emissions and utilizing a wide range of fossil fuel properties. This project was divided into four tasks: the demonstration of the ash transformation model, upgrading spreadsheet tools, enhancements to analytical capabilities using the scanning electron microscopy (SEM), and improvements to the slag viscosity model. The ash transformation model, Atran, was used to predict the size and composition of ash particles, which has a major impact on the fate of the combustion system. To optimize Atran key factors such as mineral fragmentation and coalescence, the heterogeneous and homogeneous interaction of the organically associated elements must be considered as they are applied to the operating conditions. The resulting model's ash composition compares favorably to measured results. Enhancements to existing EERC spreadsheet application included upgrading interactive spreadsheets to calculate the thermodynamic properties for fuels, reactants, products, and steam with Newton Raphson algorithms to perform calculations on mass, energy, and elemental balances, isentropic expansion of steam, and gasifier equilibrium conditions. Derivative calculations can be performed to estimate fuel heating values, adiabatic flame temperatures, emission factors, comparative fuel costs, and per-unit carbon taxes from fuel analyses. Using state-of-the-art computer-controlled scanning electron microscopes and associated microanalysis systems, a method to determine viscosity using the incorporation of grey-scale binning acquired by the SEM image was developed. The image analysis capabilities of a backscattered electron image can be subdivided into various grey-scale ranges that can be analyzed separately. Since the grey scale's intensity is dependent on the chemistry of the particle, it is possible to map chemically similar areas which can also be related to the viscosity of that compound at temperature. A second method was also developed to determine the elements associated with the organic matrix of the coals, which is currently determined by chemical fractionation. Mineral compositions and mineral densities can be determined for both included and excluded minerals, as well as the fraction of the ash that will be represented by that mineral on a frame-by-frame basis. The slag viscosity model was improved to provide improved predictions of slag viscosity and temperature of critical viscosity for representative Powder River Basin subbituminous and lignite coals.

  9. Tools for Surface Analysis | EMSL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    surface analysis - Because of the importance of clear and unambiguous communications, ISO definitions and concepts related to surface chemical analysis are now freely available....

  10. Virtual Crosswalk Analysis Tool (VCAT)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    synthesized from ideas in functional analysis, business process modeling, and complex network science. VCAT discovers synergies by analyzing natural language descriptions....

  11. Building America Analysis Methods and Tools Standing Technical...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Building America Analysis Methods and Tools Standing Technical Committee Presentation Building America Analysis Methods and Tools Standing Technical Committee Presentation This...

  12. Sandia National Laboratories: Solar Glare Hazard Analysis Tool

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Glare Hazard Analysis Tool Solar Glare Hazard Analysis Tool Available for Download On March 13, 2014, in Energy, News, News & Events, Photovoltaic, Renewable Energy, Solar, Solar...

  13. Built Environment Energy Analysis Tool Overview (Presentation)

    SciTech Connect (OSTI)

    Porter, C.

    2013-04-01T23:59:59.000Z

    This presentation provides an overview of the Built Environment Energy Analysis Tool, which is designed to assess impacts of future land use/built environment patterns on transportation-related energy use and greenhouse gas (GHG) emissions. The tool can be used to evaluate a range of population distribution and urban design scenarios for 2030 and 2050. This tool was produced as part of the Transportation Energy Futures (TEF) project, a Department of Energy-sponsored multi-agency project initiated to pinpoint underexplored strategies for abating GHGs and reducing petroleum dependence related to transportation.

  14. Analysis of Cluster Management Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office511041cloth DocumentationProductsAlternative FuelsSanta FeAuthorization|EnergyAnalysis of

  15. 2010 Solar Market Transformation Analysis and Tools

    Broader source: Energy.gov [DOE]

    This document is an overview describing the solar analysis and tool development projects funded by the DOE Market Transformation team for fiscal year 2010. These quick snapshots are intended to give you a basic look at the scope, timeline, and expected deliverables for each project.

  16. New Mexico: Solar Glare Hazard Analysis Tool Maximizes Energy...

    Office of Environmental Management (EM)

    National Laboratories developed the Solar Glare Hazard Analysis Tool (SGHAT), a free Web-based tool that can quickly calculate potential visual hazards from proposed solar...

  17. Distribution System Analysis Tools for Studying High Penetration of PV

    E-Print Network [OSTI]

    Distribution System Analysis Tools for Studying High Penetration of PV with Grid Support Features Electric Energy System #12;#12;Distribution System Analysis Tools for Studying High Penetration of PV project titled "Distribution System Analysis Tools for Studying High Penetration of PV with Grid Support

  18. Analysis Methods and Tools Standing Technical Committee Strategic...

    Broader source: Energy.gov (indexed) [DOE]

    icplananalysismethodstools212.pdf More Documents & Publications Analysis: Targeting Zero Net Energy - 2014 BTO Peer Review Building America Analysis Methods and Tools...

  19. FUTURE POWER GRID INITIATIVE Market Design Analysis Tool

    E-Print Network [OSTI]

    FUTURE POWER GRID INITIATIVE Market Design Analysis Tool OBJECTIVE Power market design plays to obtain the optimal set of market rules. IMPACT The Market Design Analysis Tool (MDAT) will be used to study the implications of market rules on market outcomes. With MDAT's tools of market design

  20. Data Analysis Tools for NSTX-U Physics Meeting

    E-Print Network [OSTI]

    Princeton Plasma Physics Laboratory

    Data Analysis Tools for NSTX-U Bill Davis Stan Kaye Physics Meeting B-318 Aug. 26, 2013 NSTX LLC #12;NSTX-U Monday Physics Meeting­ Data Analysis Tools, Bill Davis (8/26/2013) 2 Overview ·Web Tools in depth · Overlaying in different ways · Browsing Fast Camera data ·EFITmovies and EFITviewer

  1. Automated Steel Cleanliness Analysis Tool (ASCAT)

    SciTech Connect (OSTI)

    Gary Casuccio (RJ Lee Group); Michael Potter (RJ Lee Group); Fred Schwerer (RJ Lee Group); Dr. Richard J. Fruehan (Carnegie Mellon University); Dr. Scott Story (US Steel)

    2005-12-30T23:59:59.000Z

    The objective of this study was to develop the Automated Steel Cleanliness Analysis Tool (ASCATTM) to permit steelmakers to evaluate the quality of the steel through the analysis of individual inclusions. By characterizing individual inclusions, determinations can be made as to the cleanliness of the steel. Understanding the complicating effects of inclusions in the steelmaking process and on the resulting properties of steel allows the steel producer to increase throughput, better control the process, reduce remelts, and improve the quality of the product. The ASCAT (Figure 1) is a steel-smart inclusion analysis tool developed around a customized next-generation computer controlled scanning electron microscopy (NG-CCSEM) hardware platform that permits acquisition of inclusion size and composition data at a rate never before possible in SEM-based instruments. With built-in customized ''intelligent'' software, the inclusion data is automatically sorted into clusters representing different inclusion types to define the characteristics of a particular heat (Figure 2). The ASCAT represents an innovative new tool for the collection of statistically meaningful data on inclusions, and provides a means of understanding the complicated effects of inclusions in the steel making process and on the resulting properties of steel. Research conducted by RJLG with AISI (American Iron and Steel Institute) and SMA (Steel Manufactures of America) members indicates that the ASCAT has application in high-grade bar, sheet, plate, tin products, pipes, SBQ, tire cord, welding rod, and specialty steels and alloys where control of inclusions, whether natural or engineered, are crucial to their specification for a given end-use. Example applications include castability of calcium treated steel; interstitial free (IF) degasser grade slag conditioning practice; tundish clogging and erosion minimization; degasser circulation and optimization; quality assessment/steel cleanliness; slab, billet or bloom disposition; and alloy development. Additional benefits of ASCAT include the identification of inclusions that tend to clog nozzles or interact with refractory materials. Several papers outlining the benefits of the ASCAT have been presented and published in the literature. The paper entitled ''Inclusion Analysis to Predict Casting Behavior'' was awarded the American Iron and Steel Institute (AISI) Medal in 2004 for special merit and importance to the steel industry. The ASCAT represents a quantum leap in inclusion analysis and will allow steel producers to evaluate the quality of steel and implement appropriate process improvements. In terms of performance, the ASCAT (1) allows for accurate classification of inclusions by chemistry and morphological parameters, (2) can characterize hundreds of inclusions within minutes, (3) is easy to use (does not require experts), (4) is robust, and (5) has excellent image quality for conventional SEM investigations (e.g., the ASCAT can be utilized as a dual use instrument). In summary, the ASCAT will significantly advance the tools of the industry and addresses an urgent and broadly recognized need of the steel industry. Commercialization of the ASCAT will focus on (1) a sales strategy that leverages our Industry Partners; (2) use of ''technical selling'' through papers and seminars; (3) leveraging RJ Lee Group's consulting services, and packaging of the product with a extensive consulting and training program; (4) partnering with established SEM distributors; (5) establishing relationships with professional organizations associated with the steel industry; and (6) an individualized plant by plant direct sales program.

  2. Retrofit Financial Analysis Tool, Version 1.1.01

    Broader source: Energy.gov [DOE]

    Download a zip file containing the Retrofit Financial Analysis Tool, Version 1.1.01, and an example version of the Tool filled in with sample data. Save the file to your computer before opening..

  3. analysis tool extensions: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Student Researcher, University of Texas, Austin, TX ABSTRACT IGATE-E is an industrial energy analysis tool. The tool is intended to be a decision support and planning...Nasr...

  4. Method and tool for network vulnerability analysis

    DOE Patents [OSTI]

    Swiler, Laura Painton (Albuquerque, NM); Phillips, Cynthia A. (Albuquerque, NM)

    2006-03-14T23:59:59.000Z

    A computer system analysis tool and method that will allow for qualitative and quantitative assessment of security attributes and vulnerabilities in systems including computer networks. The invention is based on generation of attack graphs wherein each node represents a possible attack state and each edge represents a change in state caused by a single action taken by an attacker or unwitting assistant. Edges are weighted using metrics such as attacker effort, likelihood of attack success, or time to succeed. Generation of an attack graph is accomplished by matching information about attack requirements (specified in "attack templates") to information about computer system configuration (contained in a configuration file that can be updated to reflect system changes occurring during the course of an attack) and assumed attacker capabilities (reflected in "attacker profiles"). High risk attack paths, which correspond to those considered suited to application of attack countermeasures given limited resources for applying countermeasures, are identified by finding "epsilon optimal paths."

  5. Infrastructure Analysis Tools: A Focus on Cash Flow Analysis (Presentation)

    SciTech Connect (OSTI)

    Melaina, M.; Penev, M.

    2012-09-01T23:59:59.000Z

    NREL has developed and maintains a variety of infrastructure analysis models for the U.S. Department of Energy. Business case analysis has recently been added to this tool set. This presentation focuses on cash flow analysis. Cash flows depend upon infrastructure costs, optimized spatially and temporally, and assumptions about financing and revenue. NREL has incorporated detailed metrics on financing and incentives into the models. Next steps in modeling include continuing to collect feedback on regional/local infrastructure development activities and 'roadmap' dynamics, and incorporating consumer preference assumptions on infrastructure to provide direct feedback between vehicles and station rollout.

  6. Built Environment Analysis Tool: April 2013

    SciTech Connect (OSTI)

    Porter, C.

    2013-05-01T23:59:59.000Z

    This documentation describes the tool development. It was created to evaluate the effects of built environment scenarios on transportation energy and greenhouse gas (GHG) emissions. This documentation also provides guidance on how to apply the tool.

  7. Industrial Geospatial Analysis Tool for Energy Evaluation 

    E-Print Network [OSTI]

    Alkadi, N.; Starke, M.; Ma, O.; Nimbalkar, S.; Cox, D.; Dowling, K.; Johnson, B.; Khan, S.

    2013-01-01T23:59:59.000Z

    . The tool applies statistical modeling to multiple datasets and provides information at the geospatial resolution of zip code using bottom up approaches. Within each zip code, the current version of the tool estimates electrical energy consumption...

  8. Analysis & Tools to Spur Increased Deployment of " Waste Heat...

    Open Energy Info (EERE)

    Analysis & Tools to Spur Increased Deployment of " Waste Heat" RejectionRecycling Hybrid GHP Systems in Hot, Arid or Semiarid Climates Like Texas Geothermal Project Jump to:...

  9. analysis tool based: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Visualization Requirements, Implementation Future Work 12 Weidendorfer, Josef 2 Web-based pre-Analysis Tools CERN Preprints Summary: The project consists in the initial...

  10. A Requirements Analysis for Videogame Design Support Tools

    E-Print Network [OSTI]

    California at Santa Cruz, University of

    A Requirements Analysis for Videogame Design Support Tools Mark J. Nelson School of Interactive fields, such as architecture and mechanical design, that have CAD tools to support designers in reasoning about and visualizing designs, game designers have no tools for reasoning about and visualizing systems

  11. International Interdisciplinary Research Collaboration and Geospatial Analysis as an Integrative Tool

    E-Print Network [OSTI]

    Tool Melinda Laituri, Colorado State University This talk will focus on the role of interdisciplinary new methods and tools for analysis. Geospatial technologies provide useful tools for furthering

  12. Street and Parking Facility Lighting Retrofit Financial Analysis Tool Webinar

    Broader source: Energy.gov [DOE]

    DOE will present a live webinar titled "Using the Street and Parking Facility Lighting Retrofit Financial Analysis Tool" on Thursday, August 22, from 1:00 p.m. to 2:00 p.m. Eastern Daylight Time....

  13. Tools & Strategies for Social Data Analysis

    E-Print Network [OSTI]

    Willett, Wesley Jay

    2012-01-01T23:59:59.000Z

    and Analysis . . . . 2.4 Citizen Science and EnvironmentalKnowledge Generation in Citizen Science 4.2 The Common Senseknowledge generation in citizen science, including personas.

  14. A new tool for contamination analysis

    SciTech Connect (OSTI)

    Meltzer, M.; Gregg, H.

    1996-06-01T23:59:59.000Z

    The Contamination Analysis Unit (CAU) is a sensing system that facilitates a new approach to industrial cleaning. Through use of portable mass spectrometry and various desorption techniques, the CAU provides in-process, near-real-time measurement of surface cleanliness levels. It can be of help in significantly reducing hazardous waste generation and toxic air emissions from manufacturing operations.

  15. Electrical Analysis Tool Suite for Inductrial Energy Audits 

    E-Print Network [OSTI]

    Morelli, F.

    2014-01-01T23:59:59.000Z

    20-23, 2014 AGENDA Current Available Tools Analysis Tools Demand Visualization Weather Disaggregation Demand Aberrations Photovoltaic Optimization Demand Scheduling Automatic Report Generation Demonstration ESL-IE-14-05-39 Proceedings of the Thrity... Orleans, LA. May 20-23, 2014 Photovoltaic Optimization Solar Tracking TMY3 Surface Radiation Data Radiative Power Model Cost Optimization Photovoltaic Array Size PV Array Cost Expected Power Savings Payback Period ESL-IE-14-05-39 Proceedings...

  16. Electrical Analysis Tool Suite for Inductrial Energy Audits

    E-Print Network [OSTI]

    Morelli, F.

    2014-01-01T23:59:59.000Z

    20-23, 2014 AGENDA Current Available Tools Analysis Tools Demand Visualization Weather Disaggregation Demand Aberrations Photovoltaic Optimization Demand Scheduling Automatic Report Generation Demonstration ESL-IE-14-05-39 Proceedings of the Thrity... Orleans, LA. May 20-23, 2014 Photovoltaic Optimization Solar Tracking TMY3 Surface Radiation Data Radiative Power Model Cost Optimization Photovoltaic Array Size PV Array Cost Expected Power Savings Payback Period ESL-IE-14-05-39 Proceedings...

  17. First Annual Conference on Intelligence Analysis Methods and Tools, May 2005 PNNL-SA-44274 Top Ten Needs for Intelligence Analysis Tool Development

    E-Print Network [OSTI]

    First Annual Conference on Intelligence Analysis Methods and Tools, May 2005 PNNL-SA-44274 Top Ten Needs for Intelligence Analysis Tool Development Richard V. Badalamente and Frank L. Greitzer Battelle implications for intelligence analysis software tool develop- ment. 1. Introduction and Background Intelligence

  18. The Adversarial Route Analysis Tool: A Web Application

    SciTech Connect (OSTI)

    Casson, William H. Jr. [Los Alamos National Laboratory

    2012-08-02T23:59:59.000Z

    The Adversarial Route Analysis Tool is a type of Google maps for adversaries. It's a web-based Geospatial application similar to Google Maps. It helps the U.S. government plan operations that predict where an adversary might be. It's easily accessible and maintainble and it's simple to use without much training.

  19. Sparse Component Analysis: a New Tool for Data Mining

    E-Print Network [OSTI]

    Cichocki, Andrzej

    Sparse Component Analysis: a New Tool for Data Mining Pando Georgiev1 , Fabian Theis2 , Andrzej,hova}@bsp.brain.riken.go.jp Summary. In many practical problems for data mining the data X under consid- eration (given as (m × N Separation, cluster- ing. 1 Introduction Data mining techniques can be divided into the following classes [3

  20. A DESIGN AND ANALYSIS TOOL FOR SOLAR ELECTRIC SYSTEMS

    E-Print Network [OSTI]

    Delaware, University of

    PV PLANNER A DESIGN AND ANALYSIS TOOL FOR SOLAR ELECTRIC SYSTEMS Updated User Manual May 2011 University of Delaware #12;Mailing Address: John Byrne Director Center for Energy and Environmental Policy) 831-3098 Website: http://ceep.udel.edu The Center for Energy and Environmental Policy conducts

  1. Orienting the Neighborhood: A Subdivision Energy Analysis Tool; Preprint

    SciTech Connect (OSTI)

    Christensen, C.; Horowitz, S.

    2008-07-01T23:59:59.000Z

    This paper describes a new computerized Subdivision Energy Analysis Tool being developed to allow users to interactively design subdivision street layouts while receiving feedback about energy impacts based on user-specified building design variants and availability of roof surfaces for photovoltaic and solar water heating systems.

  2. A Tool for Efficient Fault Tree Analysis (extended version)

    E-Print Network [OSTI]

    Vellekoop, Michel

    , medical equipment, and power grids are dependable. Also, risk management is often required by law. Fault like system reliability and availability. This paper presents DFTCalc, a powerful tool for FTA the underlying state space small. 1 Introduction Risk analysis is a key feature in reliability engineering

  3. Recurrence time statistics: Versatile tools for genomic DNA sequence analysis

    E-Print Network [OSTI]

    Gao, Jianbo

    Recurrence time statistics: Versatile tools for genomic DNA sequence analysis Yinhe Cao1, Wen, and the genomes of many other organisms waiting to be sequenced, it has become increasingly important to develop from DNA sequences. One of the more important structures in a DNA se- quence is repeat-related. Often

  4. Methodology, Metrics and Measures for Testing and Evaluation of Intelligence Analysis Tools

    E-Print Network [OSTI]

    Tools Frank L. Greitzer March, 2005 Pacific Northwest Division Battelle Memorial Institute #12;FL and Measures for Testing and Evaluation of Intelligence Analysis Tools 1. Introduction The intelligence

  5. Microscopy image segmentation tool: Robust image data analysis

    SciTech Connect (OSTI)

    Valmianski, Ilya, E-mail: ivalmian@ucsd.edu; Monton, Carlos; Schuller, Ivan K. [Department of Physics and Center for Advanced Nanoscience, University of California San Diego, 9500 Gilman Drive, La Jolla, California 92093 (United States)] [Department of Physics and Center for Advanced Nanoscience, University of California San Diego, 9500 Gilman Drive, La Jolla, California 92093 (United States)

    2014-03-15T23:59:59.000Z

    We present a software package called Microscopy Image Segmentation Tool (MIST). MIST is designed for analysis of microscopy images which contain large collections of small regions of interest (ROIs). Originally developed for analysis of porous anodic alumina scanning electron images, MIST capabilities have been expanded to allow use in a large variety of problems including analysis of biological tissue, inorganic and organic film grain structure, as well as nano- and meso-scopic structures. MIST provides a robust segmentation algorithm for the ROIs, includes many useful analysis capabilities, and is highly flexible allowing incorporation of specialized user developed analysis. We describe the unique advantages MIST has over existing analysis software. In addition, we present a number of diverse applications to scanning electron microscopy, atomic force microscopy, magnetic force microscopy, scanning tunneling microscopy, and fluorescent confocal laser scanning microscopy.

  6. AstroStat - A VO Tool for Statistical Analysis

    E-Print Network [OSTI]

    Kembhavi, Ajit K; Kale, Tejas; Jagade, Santosh; Vibhute, Ajay; Garg, Prerak; Vaghmare, Kaustubh; Navelkar, Sharmad; Agrawal, Tushar; Nandrekar, Deoyani; Shaikh, Mohasin

    2015-01-01T23:59:59.000Z

    AstroStat is an easy-to-use tool for performing statistical analysis on data. It has been designed to be compatible with Virtual Observatory (VO) standards thus enabling it to become an integral part of the currently available collection of VO tools. A user can load data in a variety of formats into AstroStat and perform various statistical tests using a menu driven interface. Behind the scenes, all analysis is done using the public domain statistical software - R and the output returned is presented in a neatly formatted form to the user. The analyses performable include exploratory tests, visualizations, distribution fitting, correlation & causation, hypothesis testing, multivariate analysis and clustering. The tool is available in two versions with identical interface and features - as a web service that can be run using any standard browser and as an offline application. AstroStat will provide an easy-to-use interface which can allow for both fetching data and performing power statistical analysis on ...

  7. Industrial Geospatial Analysis Tool for Energy Evaluation (IGATE-E)

    SciTech Connect (OSTI)

    Alkadi, Nasr E [ORNL] [ORNL; Starke, Michael R [ORNL] [ORNL; Ma, Ookie [DOE EERE] [DOE EERE; Nimbalkar, Sachin U [ORNL] [ORNL; Cox, Daryl [ORNL] [ORNL

    2013-01-01T23:59:59.000Z

    IGATE-E is an energy analysis tool for industrial energy evaluation. The tool applies statistical modeling to multiple publicly available datasets and provides information at the geospatial resolution of zip code using bottom up approaches. Within each zip code, the current version of the tool estimates electrical energy consumption of manufacturing industries based on each type of industries using DOE s Industrial Assessment Center database (IAC-DB) and DOE s Energy Information Administration Manufacturing Energy Consumption Survey database (EIA-MECS DB), in addition to other commercially available databases such as the Manufacturing News database (MNI, Inc.). Ongoing and future work include adding modules for the predictions of fuel energy consumption streams, manufacturing process steps energy consumption, major energy intensive processes (EIPs) within each industry type among other metrics of interest. The tool provides validation against DOE s EIA-MECS state level energy estimations and permits several statistical examinations. IGATE-E is intended to be a decision support and planning tool to a wide spectrum of energy analysts, researchers, government organizations, private consultants, industry partners, and alike.

  8. Analysis Tools for Next-Generation Hadron Spectroscopy Experiments

    SciTech Connect (OSTI)

    Battaglieri, Marco; Briscoe, William; Celentano, Andrea; Chung, Suh-Urk; D'Angelo, Annalisa; De Vita, Rafaella; Döring, Michael; Dudek, Jozef; Eidelman, S.; Fegan, Stuart; Ferretti, J.; Filippi, A.; Fox, G.; Galata, G.; García-Tecocoatzi, H.; Glazier, Derek; Grube, B.; Hanhart, C.; Hoferichter, M.; Hughes, S. M.; Ireland, David G.; Ketzer, B.; Klein, Franz J.; Kubis, B.; Liu, B.; Masjuan, P.; Mathieu, Vincent; McKinnon, Brian; Mitchel, R.; Nerling, F.; Paul, S.; Peláez, J. R.; Rademacker, J.; Rizzo, Alessandro; Salgado, Carlos [Norfolk State University; Santopinto, E.; Sarantsev, Andrey V.; Sato, Toru; Schlüter, T.; da Silva, M. L.L.; Stankovic, I.; Strakovsky, Igor [George Washington University; Szczepaniak, Adam; Vassallo, A.; Walford, Natalie K. [Catholic University; Watts, Daniel P.; Zana, Lorenzo

    2015-01-01T23:59:59.000Z

    The series of workshops on New Partial-Wave Analysis Tools for Next-Generation Hadron Spectroscopy Experiments was initiated with the ATHOS 2012 meeting, which took place in Camogli, Italy, June 20-22, 2012. It was followed by ATHOS 2013 in Kloster Seeon near Munich, Germany, May 21-24, 2013. The third, ATHOS3, meeting is planned for April 13-17, 2015 at The George Washington University Virginia Science and Technology Campus, USA. The workshops focus on the development of amplitude analysis tools for meson and baryon spectroscopy, and complement other programs in hadron spectroscopy organized in the recent past including the INT-JLab Workshop on Hadron Spectroscopy in Seattle in 2009, the International Workshop on Amplitude Analysis in Hadron Spectroscopy at the ECT*-Trento in 2011, the School on Amplitude Analysis in Modern Physics in Bad Honnef in 2011, the Jefferson Lab Advanced Study Institute Summer School in 2012, and the School on Concepts of Modern Amplitude Analysis Techniques in Flecken-Zechlin near Berlin in September 2013. The aim of this document is to summarize the discussions that took place at the ATHOS 2012 and ATHOS 2013 meetings. We do not attempt a comprehensive review of the field of amplitude analysis, but offer a collection of thoughts that we hope may lay the ground for such a document.

  9. Analysis of Optics and Mask Contamination in SEMATECH EUV Micro-Exposure Tools

    E-Print Network [OSTI]

    Wuest, Andrea

    2008-01-01T23:59:59.000Z

    Analysis of Optics and Mask Contamination in SEMATECHMioro^Exposure Tools IEUVI Optics Contamination/Lifetime TWG

  10. TA-DA: A TOOL FOR ASTROPHYSICAL DATA ANALYSIS

    SciTech Connect (OSTI)

    Da Rio, Nicola [European Space Agency, Keplerlaan 1, 2200-AG Noordwijk (Netherlands); Robberto, Massimo, E-mail: ndario@rssd.esa.int [Space Telescope Science Institute, 3700 San Martin Dr., Baltimore, MD 21218 (United States)

    2012-12-01T23:59:59.000Z

    We present the Tool for Astrophysical Data Analysis (TA-DA), a new software aimed to greatly simplify and improve the analysis of stellar photometric data in comparison with theoretical models, and allow the derivation of stellar parameters from multi-band photometry. Its flexibility allows one to address a number of such problems: from the interpolation of stellar models, or sets of stellar physical parameters in general, to the computation of synthetic photometry in arbitrary filters or units; from the analysis of observed color-magnitude diagrams to a Bayesian derivation of stellar parameters (and extinction) based on multi-band data. TA-DA is available as a pre-compiled Interactive Data Language widget-based application; its graphical user interface makes it considerably user-friendly. In this paper, we describe the software and its functionalities.

  11. Phys. Plasmas 2 (8), August 1995, 3017 Wavelet bicoherence: A new turbulence analysis tool

    E-Print Network [OSTI]

    Martín-Solís, José Ramón

    1 Phys. Plasmas 2 (8), August 1995, 3017 Wavelet bicoherence: A new turbulence analysis tool B, Madrid, Spain Abstract A recently introduced tool for the analysis of turbulence, wavelet bicoherence [B and usefulness of a new analysis tool for chaos and turbulence that was recently introduced [1]. First, we

  12. Operations other than war: Requirements for analysis tools research report

    SciTech Connect (OSTI)

    Hartley, D.S. III

    1996-12-01T23:59:59.000Z

    This report documents the research effort to determine the requirements for new or improved analysis tools to support decisions at the strategic and operational levels for military Operations Other than War (OOTW). The work was performed for the Commander in Chief, U.S. Pacific Command (USCINCPAC). The data collection was based on workshops attended by experts in OOTWs: analysis personnel from each of the Combatant Commands, the Services, the Office of the Secretary of Defense (OSD), the Joint Staff, and other knowledgeable personnel. Further data were gathered from other workshops and conferences and from the literature. The results of this research begin with the creation of a taxonomy of OOTWs: categories of operations, attributes of operations, and tasks requiring analytical support. The tasks are connected to the Joint Staff`s Universal Joint Task List (UJTL). Historical OOTWs are analyzed to produce frequency distributions by category and responsible CINC. The analysis products are synthesized into a list of requirements for analytical tools and definitions of the requirements. The report concludes with a timeline or roadmap for satisfying the requirements.

  13. Category:EERE Analysis Tools | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual Siteof Energy 2,AUDIT REPORTEnergy Offshore Place: Spain Sector:EERE Analysis Tools Jump

  14. NREL: Hydrogen and Fuel Cells Research - Energy Analysis and Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's Possible for Renewable Energy: Grid Integration NREL isData and ResourcesEnergy Analysis and Tools

  15. Distributed Wind Site Analysis Tool (DSAT) | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnualPropertyd8c-a9ae-f8521cbb8489 No revision| Open Energy InformationSite Analysis Tool (DSAT)

  16. Risk D&D Rapid Prototype: Scenario Documentation and Analysis Tool

    SciTech Connect (OSTI)

    Unwin, Stephen D.; Seiple, Timothy E.

    2009-05-28T23:59:59.000Z

    Report describes process and methodology associated with a rapid prototype tool for integrating project risk analysis and health & safety risk analysis for decontamination and decommissioning projects.

  17. mc4qcd: Online Analysis Tool for Lattice QCD

    E-Print Network [OSTI]

    Massimo Di Pierro; Yaoqian Zhong; Brian Schinazi

    2010-05-19T23:59:59.000Z

    mc4qcd is a web based collaboration tool for analysis of Lattice QCD data. Lattice QCD computations consists of a large scale Markov Chain Monte Carlo. Multiple measurements are performed at each MC step. Our system acquires the data by uploading log files, parses them for results of measurements, filters the data, mines for required information by aggregating results, represents the results as plots and histograms, and it further allows refining and interaction by fitting the results. The system computes moving averages and autocorrelations, builds bootstrap samples and bootstrap errors, and allows modeling the data using Bayesian correlated constrained linear and non-linear fits. It can be scripted to allow real time visualization of results form an ongoing computation. The system is modular and it can be adapted to automating the analysis workflow of different types of MC computations.

  18. A new tool for accelerator system modeling and analysis

    SciTech Connect (OSTI)

    Gillespie, G.H.; Hill, B.W. [G.H. Gillespie Associates, Inc., Del Mar, CA (United States); Jameson, R.A. [Los Alamos National Lab., NM (United States)

    1994-09-01T23:59:59.000Z

    A novel computer code is being developed to generate system level designs of radiofrequency ion accelerators. The goal of the Accelerator System Model (ASM) code is to create a modeling and analysis tool that is easy to use, automates many of the initial design calculations, supports trade studies used in assessing alternate designs and yet is flexible enough to incorporate new technology concepts as they emerge. Hardware engineering parameters and beam dynamics are modeled at comparable levels of fidelity. Existing scaling models of accelerator subsystems were sued to produce a prototype of ASM (version 1.0) working within the Shell for Particle Accelerator Related Codes (SPARC) graphical user interface. A small user group has been testing and evaluating the prototype for about a year. Several enhancements and improvements are now being developed. The current version (1.1) of ASM is briefly described and an example of the modeling and analysis capabilities is illustrated.

  19. Natural Language Processing (NLP) tools for the analysis of incident and accident reports

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Natural Language Processing (NLP) tools for the analysis of incident and accident reports, Analysis of accidents/incidents, Categorization, Textual similarity INTRODUCTION Learning valuable lessons, (ii) the analysis of reports regardless of the categorization in order to expand the analysis

  20. XQCAT: eXtra Quark Combined Analysis Tool

    E-Print Network [OSTI]

    D. Barducci; A. Belyaev; M. Buchkremer; J. Marrouche; S. Moretti; L. Panizzi

    2014-09-10T23:59:59.000Z

    XQCAT (eXtra Quark Combined Analysis Tool) is a tool aimed to determine exclusion Confidence Levels (eCLs) for scenarios of new physics characterised by the presence of one or multiple heavy extra quarks (XQ) which interact through Yukawa couplings with any of the Standard Model (SM) quarks. The code uses a database of efficiencies for pre-simulated processes of Quantum Chromo-Dynamics (QCD) pair production and on-shell decays of extra quarks. In the version 1.0 of XQCAT the efficiencies have been computed for a set of seven publicly available search results by the CMS experiment, and the package is subject to future updates to include further searches by both ATLAS and CMS collaborations. The input for the code is a text file in which masses, branching ratios (BRs) and dominant chirality of the couplings of the new quarks are provided. The output of the code is the eCL of the test point for each implemented experimental analysis considered individually and, when possible, in statistical combination.

  1. automated analysis tool: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and Information Sciences Websites Summary: automating tools or an open source DBMS whose lack of automated tools might increase the operational cost their benefits. We...

  2. Cooperative Testing and Analysis: Human-Tool, Tool-Tool, and Human-Human Cooperations to Get Work Done

    E-Print Network [OSTI]

    Xie, Tao

    Done (Keynote Paper) Tao Xie Department of Computer Science North Carolina State University Raleigh, NC, USA xie@csc.ncsu.edu Abstract--Tool automation to reduce manual effort has been an active research (or even users) to cooperate to help tools such as in the form of crowdsourcing. A new research

  3. EXPERT TOOLS FOR QSAR ANALYSIS AND LEAD OPTIMIZATION The basic tools needed to build powerful, predictive models of biological activity (or any other property) from molecu-

    E-Print Network [OSTI]

    Ferreira, Márcia M. C.

    EXPERT TOOLS FOR QSAR ANALYSIS AND LEAD OPTIMIZATION The basic tools needed to build powerful in SYBYL's QSAR module. These include molecular field generation tools, least-squares (PLS, PCA and SIMCA) and non-linear (hierarchical clustering) analysis tools. The most powerful of these techniques can

  4. A Simulation Tool for Analysis of Alternative Paradigms for the New Electricity Business

    E-Print Network [OSTI]

    A Simulation Tool for Analysis of Alternative Paradigms for the New Electricity Business Thomas J preliminary results on the development of a simulation tool to perform this analysis. Since power systems are ultimately governed by the laws of physics, the heart of the tool is a power system simulation engine, valid

  5. WHY CONVENTIONAL TOOLS FOR POLICY ANALYSIS ARE OFTEN INADEQUATE FOR PROBLEMS OF GLOBAL CHANGE

    E-Print Network [OSTI]

    Risbey, James S.

    WHY CONVENTIONAL TOOLS FOR POLICY ANALYSIS ARE OFTEN INADEQUATE FOR PROBLEMS OF GLOBAL CHANGE of tools for quantitative policy analysis. As policy analysts have turned to the consideration of climate and other problems of global change, they have found it natural to employ such now standard tools as utility

  6. Comparative Usability Study of Two Space Logistics Analysis Tools

    E-Print Network [OSTI]

    Lee, Chairwoo

    Future space exploration missions and campaigns will require sophisticated tools to help plan and analyze logistics. To encourage their use, space logistics tools must be usable: a design concept encompassing terms such ...

  7. Dual-use tools and systematics-aware analysis workflows in the ATLAS Run-II analysis model

    E-Print Network [OSTI]

    FARRELL, Steven; The ATLAS collaboration

    2015-01-01T23:59:59.000Z

    The ATLAS analysis model has been overhauled for the upcoming run of data collection in 2015 at 13 TeV. One key component of this upgrade was the Event Data Model (EDM), which now allows for greater flexibility in the choice of analysis software framework and provides powerful new features that can be exploited by analysis software tools. A second key component of the upgrade is the introduction of a dual-use tool technology, which provides abstract interfaces for analysis software tools to run in either the Athena framework or a ROOT-based framework. The tool interfaces, including a new interface for handling systematic uncertainties, have been standardized for the development of improved analysis workflows and consolidation of high-level analysis tools. This presentation will cover the details of the dual-use tool functionality, the systematics interface, and how these features fit into a centrally supported analysis environment.

  8. RISK MANAGEMENT AND RISK ANALYSIS-BASED DECISION TOOLS FOR ATTACKS ON

    E-Print Network [OSTI]

    Wang, Hai

    RISK MANAGEMENT AND RISK ANALYSIS- BASED DECISION TOOLS FOR ATTACKS ON ELECTRIC POWER Simonoff, J.usc.edu/create Report #04-004DRAFT #12;Risk Management and Risk Analysis-Based Decision Tools for Attacks on Electric for Risk and Economic Analysis of Terrorism Events University of Southern California Los Angeles

  9. Text-Alternative Version: Municipal Solid-State Street Lighting Consortium Retrofit Financial Analysis Tool Webcast

    Broader source: Energy.gov [DOE]

    Below is the text-alternative version of the "Municipal Solid-State Street Lighting Consortium Retrofit Financial Analysis Tool" webcast, held April 3, 2012.

  10. Text-Alternative Version: Using the Street and Parking Facility Lighting Retrofit Financial Analysis Tool

    Broader source: Energy.gov [DOE]

    Below is the text-alternative version of the "Using the Street and Parking Facility Lighting Retrofit Financial Analysis Tool" webcast, held August 22, 2013.

  11. Numerical tools applied to power reactor noise analysis Christophe Demazie`re*, Imre Pazsit

    E-Print Network [OSTI]

    Pázsit, Imre

    Review Numerical tools applied to power reactor noise analysis Christophe Demazie`re*, Imre Pa and application of the numerical tools employed. The code that was developed yields the space and non-critical systems with an external source. Some appli- cations of these tools to power reactor

  12. Researchers at the National Renewable Energy Laboratory (NREL) develop a new complex modeling and analysis tool

    E-Print Network [OSTI]

    and analysis tool capable of analyzing floating platform concepts for offshore wind turbines. The new modeling tool combines the computational methodologies used to analyze land-based wind turbines dynamic simulation tool will enable the development of cost-effective offshore technologies capable

  13. Analysis of the influence of tool dynamics in diamond turning

    SciTech Connect (OSTI)

    Fawcett, S.C.; Luttrell, D.E.; Keltie, R.F.

    1988-12-01T23:59:59.000Z

    This report describes the progress in defining the role of machine and interface dynamics on the surface finish in diamond turning. It contains a review of literature from conventional and diamond machining processes relating tool dynamics, material interactions and tool wear to surface finish. Data from experimental measurements of tool/work piece interface dynamics are presented as well as machine dynamics for the DTM at the Center.

  14. Sandia Energy - Tool for Siting, Planning, and Encroachment Analysis...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    for Renewables (TSPEAR) Viewshed Model Completed Home Renewable Energy Energy News Wind Energy News & Events Computational Modeling & Simulation Tool for Siting, Planning, and...

  15. analysis tool applied: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    CiteSeer Summary: by Edmund V. Aversenti, General Magnaplate Designers tasked with tooling up for new composite parts must consider multiple factors before specifying a...

  16. NREL: Dynamic Maps, GIS Data, and Analysis Tools - Unsubscribe

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    GIS Renewable Energy Technical Potential Maps Data Resources Data Visualization & Geospatial Tools Geospatial Team Publications Mailing List Contact Us Did you find what you...

  17. Webinar May 12: Overview of Station Analysis Tools Developed...

    Energy Savers [EERE]

    Scenario Tool (H2FAST)-developed by Argonne National Laboratory and the National Renewable Energy Laboratory, respectively, to address key technical and financial barriers to...

  18. analysis tool ascat: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Interface) documentation is a significant task for developing a good class library or framework. However, existing documentation tools such as Javadoc provide only limited...

  19. Research Article Towards spatial data quality information analysis tools for experts

    E-Print Network [OSTI]

    Research Article Towards spatial data quality information analysis tools for experts assessing October 2004; in final form 11 November 2005 ) Geospatial data users increasingly face the need to assess data quality analysis. This paper presents the design of such a tool that can manage heterogeneous data

  20. AnalyzeHOLE: An Integrated Wellbore Flow Analysis Tool

    SciTech Connect (OSTI)

    Keith J. Halford

    2009-10-01T23:59:59.000Z

    Conventional interpretation of flow logs assumes that hydraulic conductivity is directly proportional to flow change with depth. However, well construction can significantly alter the expected relation between changes in fluid velocity and hydraulic conductivity. Strong hydraulic conductivity contrasts between lithologic intervals can be masked in continuously screened wells. Alternating intervals of screen and blank casing also can greatly complicate the relation between flow and hydraulic properties. More permeable units are not necessarily associated with rapid fluid-velocity increases. Thin, highly permeable units can be misinterpreted as thick and less permeable intervals or not identified at all. These conditions compromise standard flow-log interpretation because vertical flow fields are induced near the wellbore. AnalyzeHOLE, an integrated wellbore analysis tool for simulating flow and transport in wells and aquifer systems, provides a better alternative for simulating and evaluating complex well-aquifer system interaction. A pumping well and adjacent aquifer system are simulated with an axisymmetric, radial geometry in a two-dimensional MODFLOW model. Hydraulic conductivities are distributed by depth and estimated with PEST by minimizing squared differences between simulated and measured flows and drawdowns. Hydraulic conductivity can vary within a lithology but variance is limited with regularization. Transmissivity of the simulated system also can be constrained to estimates from single-well, pumping tests. Water-quality changes in the pumping well are simulated with simple mixing models between zones of differing water quality. These zones are differentiated by backtracking thousands of particles from the well screens with MODPATH. An Excel spreadsheet is used to interface the various components of AnalyzeHOLE by (1) creating model input files, (2) executing MODFLOW, MODPATH, PEST, and supporting FORTRAN routines, and (3) importing and graphically displaying pertinent results.

  1. Online Analysis of Wind and Solar Part I: Ramping Tool

    SciTech Connect (OSTI)

    Etingov, Pavel V.; Ma, Jian; Makarov, Yuri V.; Subbarao, Krishnappa

    2012-01-31T23:59:59.000Z

    To facilitate wider penetration of renewable resources without compromising system reliability concerns arising from the lack of predictability of intermittent renewable resources, a tool for use by California Independent System Operator (CAISO) power grid operators was developed by Pacific Northwest National Laboratory (PNNL) in conjunction with CAISO with funding from California Energy Commission. This tool predicts and displays additional capacity and ramping requirements caused by uncertainties in forecasts of loads and renewable generation. The tool is currently operational in the CAISO operations center. This is one of two final reports on the project.

  2. Online Analysis of Wind and Solar Part II: Transmission Tool

    SciTech Connect (OSTI)

    Makarov, Yuri V.; Etingov, Pavel V.; Ma, Jian; Subbarao, Krishnappa

    2012-01-31T23:59:59.000Z

    To facilitate wider penetration of renewable resources without compromising system reliability concerns arising from the lack of predictability of intermittent renewable resources, a tool for use by California Independent System Operator (CAISO) power grid operators was developed by Pacific Northwest National Laboratory (PNNL) in conjunction with CAISO with funding from California Energy Commission. The tool analyzes and displays the impacts of uncertainties in forecasts of loads and renewable generation on: (1) congestion, (2)voltage and transient stability margins, and (3)voltage reductions and reactive power margins. The impacts are analyzed in the base case and under user-specified contingencies.A prototype of the tool has been developed and implemented in software.

  3. FAILURE PREDICTION AND STRESS ANALYSIS OF MICROCUTTING TOOLS

    E-Print Network [OSTI]

    Chittipolu, Sujeev

    2010-07-14T23:59:59.000Z

    -based products are limited because silicon is brittle. Products can be made from other engineering materials and need to be machined in microscale. This research deals with predicting microtool failure by studying spindle runout and tool deflection effects...

  4. International Workshop on Analysis Tools and Methodologies for Embedded and Real-time

    E-Print Network [OSTI]

    Lipari, Giuseppe

    1st International Workshop on Analysis Tools and Methodologies for Embedded and Real-time Systems application areas, from Real- Time Operating Systems to distributed systems, from safety critical to soft real of the International Workshop on Anaysis Tools and Methodologies for Embedded and Real-time Systems (WATERS

  5. Synthesis Tools for Structural Dynamics and Partitioned Analysis of Coupled Systems

    E-Print Network [OSTI]

    Felippa, Carlos A.

    . Synthesis Tools for Structural Dynamics and Partitioned Analysis of Coupled Systems C. A. Felippa and K. C. Park Department of Aerospace Engineering Sciences and Center for Aerospace Structures and K. C. Park domain. It can only show that a model works. A "bridging" tool between human analytics

  6. An account of scientific transfer to the industry: the co-development of an incident analysis tool

    E-Print Network [OSTI]

    Boyer, Edmond

    about their need of an incident analysis method. The company wanted a tool that would help them better

  7. analysis tools project: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    A; Sang, M 2001-01-01 40 Design of a Data Analysis System for Walking Robots. A Design Project Report Engineering Websites Summary: Design of a Data Analysis System for Walking...

  8. Applying observations of work activity in designing prototype data analysis tools

    SciTech Connect (OSTI)

    Springmeyer, R.R.

    1993-07-06T23:59:59.000Z

    Designers, implementers, and marketers of data analysis tools typically have different perspectives than users. Consequently, data analysis often find themselves using tools focused on graphics and programming concepts rather than concepts which reflect their own domain and the context of their work. Some user studies focus on usability tests late in development; others observe work activity, but fail to show how to apply that knowledge in design. This paper describes a methodology for applying observations of data analysis work activity in prototype tool design. The approach can be used both in designing improved data analysis tools, and customizing visualization environments to specific applications. We present an example of user-centered design for a prototype tool to cull large data sets. We revisit the typical graphical approach of animating a large data set from the point of view of an analysis who is culling data. Field evaluations using the prototype tool not only revealed valuable usability information, but initiated in-depth discussions about user`s work, tools, technology, and requirements.

  9. An integrated traverse planner and analysis tool for future lunar surface exploration

    E-Print Network [OSTI]

    Johnson, Aaron William

    2010-01-01T23:59:59.000Z

    This thesis discusses the Surface Exploration Traverse Analysis and Navigation Tool (SEXTANT), a system designed to help maximize productivity, scientific return, and safety on future lunar and planetary explorations,. The ...

  10. Webcast: Municipal Solid-State Street Lighting Consortium Retrofit Financial Analysis Tool

    Broader source: Energy.gov [DOE]

    This April 3, 2012 webcast presented information about the Retrofit Financial Analysis Tool developed by DOE"s Municipal Solid-State Street Lighting Consortium. Doug Elliott of Pacific Northwest...

  11. Process-oriented evaluation of user interactions in integrated system analysis tools

    E-Print Network [OSTI]

    Lee, Chaiwoo

    When computer-based tools are used for analysis of complex systems, the design of user interactions and interfaces becomes an essential part of development that determines the overall quality. The objective of this study ...

  12. Using the Street and Parking Facility Lighting Retrofit Financial Analysis Tool

    Broader source: Energy.gov [DOE]

    This August 22, 2013 webinar provided a guided walk-through of the Street and Parking Facility Lighting Retrofit Financial Analysis Tool. Developed by a partnership of the DOE Municipal Solid-State...

  13. Overview of Station Analysis Tools Developed in Support of H2USA

    Broader source: Energy.gov [DOE]

    Access the recording and download presentation slides from the Fuel Cell Technologies Office webinar "Overview of Station Analysis Tools Developed in Support of H2USA" held on May 12, 2015.

  14. A Knowledge Acquisition Tool for Course of Action Analysis* Ken Barker1

    E-Print Network [OSTI]

    Forbus, Kenneth D.

    A Knowledge Acquisition Tool for Course of Action Analysis* Ken Barker1 , Jim Blythe2 , Gary Gil2 , Boris Katz3 , Jihie Kim2 , Gary King6 , Sunil Mishra4 , Clayton Morrison6 , Ken Murray4

  15. THE BUBBLE TRANSFORM: A NEW TOOL FOR ANALYSIS OF FINITE ELEMENT METHODS

    E-Print Network [OSTI]

    THE BUBBLE TRANSFORM: A NEW TOOL FOR ANALYSIS OF FINITE ELEMENT METHODS RICHARD S. FALK AND RAGNAR estimates for various finite element methods. In particular, for the analysis of mixed finite element be very useful, but hard to construct, is the analysis of the so-called p-version of the finite element

  16. VAST: A Human-Centered, Domain-Independent Video Analysis Support Tool

    E-Print Network [OSTI]

    Nordt, Marlo Faye

    2011-08-08T23:59:59.000Z

    VAST: A HUMAN-CENTERED, DOMAIN-INDEPENDENT VIDEO ANALYSIS SUPPORT TOOL A Dissertation by MARLO FAYE NORDT Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment of the requirements... for the degree of DOCTOR OF PHILOSOPHY December 2008 Major Subject: Computer Science VAST: A HUMAN-CENTERED, DOMAIN-INDEPENDENT VIDEO ANALYSIS SUPPORT TOOL A Dissertation by MARLO FAYE NORDT Submitted to the Office of Graduate...

  17. analysis system tool: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    to analyse LCA variability of energy systems Physics Websites Summary: variability in LCA are sensitivity analysis (SA). However, when dealing with environmental impact...

  18. OpenStudio Policy Analysis Tool | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual SiteofEvaluatingGroup |JilinLuOpenNorthOlympia GreenThe community Energy Tools

  19. Building a Community Infrastructure for Scalable On-Line Performance Analysis Tools around Open|Speedshop

    SciTech Connect (OSTI)

    Miller, Barton

    2014-06-30T23:59:59.000Z

    Peta-scale computing environments pose significant challenges for both system and application developers and addressing them required more than simply scaling up existing tera-scale solutions. Performance analysis tools play an important role in gaining this understanding, but previous monolithic tools with fixed feature sets have not sufficed. Instead, this project worked on the design, implementation, and evaluation of a general, flexible tool infrastructure supporting the construction of performance tools as “pipelines” of high-quality tool building blocks. These tool building blocks provide common performance tool functionality, and are designed for scalability, lightweight data acquisition and analysis, and interoperability. For this project, we built on Open|SpeedShop, a modular and extensible open source performance analysis tool set. The design and implementation of such a general and reusable infrastructure targeted for petascale systems required us to address several challenging research issues. All components needed to be designed for scale, a task made more difficult by the need to provide general modules. The infrastructure needed to support online data aggregation to cope with the large amounts of performance and debugging data. We needed to be able to map any combination of tool components to each target architecture. And we needed to design interoperable tool APIs and workflows that were concrete enough to support the required functionality, yet provide the necessary flexibility to address a wide range of tools. A major result of this project is the ability to use this scalable infrastructure to quickly create tools that match with a machine architecture and a performance problem that needs to be understood. Another benefit is the ability for application engineers to use the highly scalable, interoperable version of Open|SpeedShop, which are reassembled from the tool building blocks into a flexible, multi-user interface set of tools. This set of tools targeted at Office of Science Leadership Class computer systems and selected Office of Science application codes. We describe the contributions made by the team at the University of Wisconsin. The project built on the efforts in Open|SpeedShop funded by DOE/NNSA and the DOE/NNSA Tri-Lab community, extended Open|Speedshop to the Office of Science Leadership Class Computing Facilities, and addressed new challenges found on these cutting edge systems. Work done under this project at Wisconsin can be divided into two categories, new algorithms and techniques for debugging, and foundation infrastructure work on our Dyninst binary analysis and instrumentation toolkits and MRNet scalability infrastructure.

  20. An Analysis Tool for Flight Dynamics Monte Carlo Simulations

    E-Print Network [OSTI]

    Restrepo, Carolina 1982-

    2011-05-20T23:59:59.000Z

    and analysis work to understand vehicle operating limits and identify circumstances that lead to mission failure. A Monte Carlo simulation approach that varies a wide range of physical parameters is typically used to generate thousands of test cases...

  1. An integrated data analysis tool for improving measurements on the MST RFP

    SciTech Connect (OSTI)

    Reusch, L. M., E-mail: lmmcguire@wisc.edu; Galante, M. E.; Johnson, J. R.; McGarry, M. B.; Den Hartog, D. J. [Physics Department, University of Wisconsin-Madison, Madison, Wisconsin 53706 (United States); Franz, P. [Consorzio RFX, EURATOM-ENEA Association, Padova (Italy); Stephens, H. D. [Physics Department, University of Wisconsin-Madison, Madison, Wisconsin 53706 (United States); Pierce College Fort Steilacoom, Lakewood, Washington 98498 (United States)

    2014-11-15T23:59:59.000Z

    Many plasma diagnostics contain complementary information. For example, the double-foil soft x-ray system (SXR) and the Thomson Scattering diagnostic (TS) on the Madison Symmetric Torus both measure electron temperature. The complementary information from these diagnostics can be combined using a systematic method based on integrated data analysis techniques, leading to more accurate and sensitive results. An integrated data analysis tool based on Bayesian probability theory was able to estimate electron temperatures that are consistent with both the SXR and TS diagnostics and more precise than either. A Markov Chain Monte Carlo analysis to increase the flexibility of the tool was implemented and benchmarked against a grid search method.

  2. Ultrascale Visualization Climate Data Analysis Tools (UV-CDAT): Semi-Annual Progress Report

    SciTech Connect (OSTI)

    Williams, D N

    2012-02-29T23:59:59.000Z

    This report summarizes work carried out by the Ultrascale Visualization Climate Data Analysis Tools (UV-CDAT) Team for the period of July 1, 2011 through December 31, 2011. It discusses highlights, overall progress, period goals, and collaborations and lists papers and presentations. The UV-CDAT team is positioned to address the following high-level visualization requirements: (1) Alternative parallel streaming statistics and analysis pipelines - Data parallelism, Task parallelism, Visualization parallelism; (2) Optimized parallel input/output (I/O); (3) Remote interactive execution; (4) Advanced intercomparison visualization; (5) Data provenance processing and capture; and (6) Interfaces for scientists - Workflow data analysis and visualization construction tools, Visualization interfaces.

  3. Unsteady, high Reynolds number validation cases for a multi-phase CFD analysis tool have been

    E-Print Network [OSTI]

    Kunz, Robert Francis

    and constituent volume fraction transport/generation for liquid, condensable vapor and non-condensable gas fields1 Abstract Unsteady, high Reynolds number validation cases for a multi-phase CFD analysis tool have of the effect of cavitation number, Reynolds number and turbulence model has been made. Analysis of the modeled

  4. Power Systems Life Cycle Analysis Tool (Power L-CAT).

    SciTech Connect (OSTI)

    Andruski, Joel; Drennen, Thomas E.

    2011-01-01T23:59:59.000Z

    The Power Systems L-CAT is a high-level dynamic model that calculates levelized production costs and tracks environmental performance for a range of electricity generation technologies: natural gas combined cycle (using either imported (LNGCC) or domestic natural gas (NGCC)), integrated gasification combined cycle (IGCC), supercritical pulverized coal (SCPC), existing pulverized coal (EXPC), nuclear, and wind. All of the fossil fuel technologies also include an option for including carbon capture and sequestration technologies (CCS). The model allows for quick sensitivity analysis on key technical and financial assumptions, such as: capital, O&M, and fuel costs; interest rates; construction time; heat rates; taxes; depreciation; and capacity factors. The fossil fuel options are based on detailed life cycle analysis reports conducted by the National Energy Technology Laboratory (NETL). For each of these technologies, NETL's detailed LCAs include consideration of five stages associated with energy production: raw material acquisition (RMA), raw material transport (RMT), energy conversion facility (ECF), product transportation and distribution (PT&D), and end user electricity consumption. The goal of the NETL studies is to compare existing and future fossil fuel technology options using a cradle-to-grave analysis. The NETL reports consider constant dollar levelized cost of delivered electricity, total plant costs, greenhouse gas emissions, criteria air pollutants, mercury (Hg) and ammonia (NH3) emissions, water withdrawal and consumption, and land use (acreage).

  5. Nuclear criticality safety tools in the Chernobyl-4 accident analysis

    SciTech Connect (OSTI)

    Landeyro, P.A.

    1988-01-01T23:59:59.000Z

    The collaboration with the Italian Safety Authority (DISP), started in July 1986, has the aim of studying, from a neutronic point of view, the possible initiator event and the accident dynamics in unit four of the Chernobly nuclear power plant. This report was produced within the framework of that collaboration. A main condition of the present work was making use of standard calculational methods employed in nuclear criticality safety analysis. This means that the neutron multiplication factor calculation should be made with the modules and the cross-section libraries of the SCALE system or in any case with some KENO IV version and the burnup calculation with the ORIGEN code.

  6. Model Analysis ToolKit (MATK), Version 0

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville PowerCherries 82981-1cnHighandSWPA / SPRA /Ml'. William Hirst Hirst Enterprises, Inc.AnalysisModel

  7. Software Tools for Analysis of Concentrated Solar Power Technologies

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What'sis Taking Over Our Instagram Secretary Moniz9MorganYou are hereValueacquisition/analysis

  8. The development of a visualization tool for displaying analysis and test results

    SciTech Connect (OSTI)

    Uncapher, W.L.; Ammerman, D.J.; Ludwigsen, J.S. [Sandia National Labs., Albuquerque, NM (United States). Transportation System Development Dept.; Knight, R.D. [Geo-Centers, Inc., Albuquerque, NM (United States); Wix, S.D. [GRAM, Inc., Albuquerque, NM (United States)

    1995-12-31T23:59:59.000Z

    The evaluation and certification of packages for transportation of radioactive materials is performed by analysis, testing, or a combination of both. Within the last few years, many transport packages that were certified have used a combination of analysis and testing. The ability to combine and display both kinds of data with interactive graphical tools allows a faster and more complete understanding of the response of the package to these environments. Sandia National Laboratories has developed an initial version of a visualization tool that allows the comparison and display of test and of analytical data as part of a Department of Energy-sponsored program to support advanced analytical techniques and test methodologies. The capability of the tool extends to both mechanical (structural) and thermal data.

  9. FRACTAL ANALYSIS TOOLS FOR CHARACTERIZING THE COLORIMETRIC ORGANIZATION OF DIGITAL IMAGES

    E-Print Network [OSTI]

    Chapeau-Blondeau, François

    FRACTAL ANALYSIS TOOLS FOR CHARACTERIZING THE COLORIMETRIC ORGANIZATION OF DIGITAL IMAGES Case.chapeau-blondeau}@univ-angers.fr Keywords: Color image, Color histogram, Fractal, Self-similarity, Capacity dimension, Correlation dimension of algorithms which can characterize fractal organizations in the support and population of their three

  10. Ontology-Based Software Analysis and Reengineering Tool Integration: The OASIS Service-Sharing Methodology

    E-Print Network [OSTI]

    Cordy, James R.

    Ontology-Based Software Analysis and Reengineering Tool Integration: The OASIS Service-Sharing Integration System (OASIS) is a novel approach to integration that makes use of specially constructed through service-sharing. This short pa- per provides an outline of the design and function of OASIS. 2

  11. DRIVE Analysis Tool Generates Custom Vehicle Drive Cycles Based on Real-World Data (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2013-04-01T23:59:59.000Z

    This fact sheet from the National Renewable Energy Laboratory describes the Drive-Cycle Rapid Investigation, Visualization, and Evaluation (DRIVE) analysis tool, which uses GPS and controller area network data to characterize vehicle operation and produce custom vehicle drive cycles, analyzing thousands of hours of data in a matter of minutes.

  12. State-of-the-art Tools and Techniques for Quantitative Modeling and Analysis of Embedded

    E-Print Network [OSTI]

    David, Alexandre

    1 State-of-the-art Tools and Techniques for Quantitative Modeling and Analysis of Embedded Systems¶AalborgCNRS VerimagINRIA/IRISA §Saarland University ¶Embedded Systems Institute and Radboud University Abstract and stochastic aspects. Then, we will overview the BIP framework for modular design and code generation. Finally

  13. 3D Scanning Technology as a Standard Archaeological Tool for Pottery Analysis: Practice and Theory

    E-Print Network [OSTI]

    3D Scanning Technology as a Standard Archaeological Tool for Pottery Analysis: Practice and Theory project, where 3D scanning technology, and newly developed software to optimally identify the rotation potsherds from several sites and periods were scanned, their symmetry axis computed, and their mean profiles

  14. Test data will be used to validate advanced turbine design and analysis tools.

    E-Print Network [OSTI]

    Test data will be used to validate advanced turbine design and analysis tools. NREL signed a Cooperative Research and Development Agreement with Alstom in 2010 to conduct certification testing certification testing in 2011. Tests to be conducted by NREL include a power quality test to finalize

  15. Developing a Training Tool for Intraoperative Mitral Valve Analysis Neil A. Tenenholtz, Robert D. Howe

    E-Print Network [OSTI]

    Developing a Training Tool for Intraoperative Mitral Valve Analysis Neil A. Tenenholtz, Robert D@seas.harvard.edu INTRODUCTION The mitral valve is one of the four valves of the human heart. Serving as a passive check valve, a healthy mitral valve permits the flow of oxygenated blood from the left atrium to the left ventricle while

  16. Save-IDE A Tool for Design, Analysis and Implementation of Component-Based Embedded Systems

    E-Print Network [OSTI]

    Becker, Steffen

    Save-IDE ­ A Tool for Design, Analysis and Implementation of Component-Based Embedded Systems S.nystrom, thomas.nolte, paul.pettersson, ivica.crnkovic}@mdh.se Abstract The paper presents Save-IDE, an Integrated Develop- ment Environment for the development of component-based embedded systems. Save-IDE supports

  17. Mobility analysis tool based on the fundamental principle of conservation of energy.

    SciTech Connect (OSTI)

    Spletzer, Barry Louis; Nho, Hyuchul C.; Salton, Jonathan Robert

    2007-08-01T23:59:59.000Z

    In the past decade, a great deal of effort has been focused in research and development of versatile robotic ground vehicles without understanding their performance in a particular operating environment. As the usage of robotic ground vehicles for intelligence applications increases, understanding mobility of the vehicles becomes critical to increase the probability of their successful operations. This paper describes a framework based on conservation of energy to predict the maximum mobility of robotic ground vehicles over general terrain. The basis of the prediction is the difference between traction capability and energy loss at the vehicle-terrain interface. The mission success of a robotic ground vehicle is primarily a function of mobility. Mobility of a vehicle is defined as the overall capability of a vehicle to move from place to place while retaining its ability to perform its primary mission. A mobility analysis tool based on the fundamental principle of conservation of energy is described in this document. The tool is a graphical user interface application. The mobility analysis tool has been developed at Sandia National Laboratories, Albuquerque, NM. The tool is at an initial stage of development. In the future, the tool will be expanded to include all vehicles and terrain types.

  18. Virtual tool mark generation for efficient striation analysis in forensic science

    SciTech Connect (OSTI)

    Ekstrand, Laura [Ames Laboratory

    2012-11-16T23:59:59.000Z

    In 2009, a National Academy of Sciences report called for investigation into the scienti#12;c basis behind tool mark comparisons (National Academy of Sciences, 2009). Answering this call, Chumbley et al. (2010) attempted to prove or disprove the hypothesis that tool marks are unique to a single tool. They developed a statistical algorithm that could, in most cases, discern matching and non-matching tool marks made at di#11;erent angles by sequentially numbered screwdriver tips. Moreover, in the cases where the algorithm misinterpreted a pair of marks, an experienced forensics examiner could discern the correct outcome. While this research served to con#12;rm the basic assumptions behind tool mark analysis, it also suggested that statistical analysis software could help to reduce the examiner's workload. This led to a new tool mark analysis approach, introduced in this thesis, that relies on 3D scans of screwdriver tip and marked plate surfaces at the micrometer scale from an optical microscope. These scans are carefully cleaned to remove noise from the data acquisition process and assigned a coordinate system that mathematically de#12;nes angles and twists in a natural way. The marking process is then simulated by using a 3D graphics software package to impart rotations to the tip and take the projection of the tip's geometry in the direction of tool travel. The edge of this projection, retrieved from the 3D graphics software, becomes a virtual tool mark. Using this method, virtual marks are made at increments of 5#14; and compared to a scan of the evidence mark. The previously developed statistical package from Chumbley et al. (2010) performs the comparison, comparing the similarity of the geometry of both marks to the similarity that would occur due to random chance. The resulting statistical measure of the likelihood of the match informs the examiner of the angle of the best matching virtual mark, allowing the examiner to focus his/her mark analysis on a smaller range of angles. Preliminary results are quite promising. In a study with both sides of 6 screwdriver tips and 34 corresponding marks, the method distinguished known matches from known non-matches with zero false positive matches and only two matches mistaken for non-matches. For matches, it could predict the correct marking angle within #6;5-10#14;. Moreover, on a standard desktop computer, the virtual marking software is capable of cleaning 3D tip and plate scans in minutes and producing a virtual mark and comparing it to a real mark in seconds. These results support several of the professional conclusions of the tool mark analysis com- munity, including the idea that marks produced by the same tool only match if they are made at similar angles. The method also displays the potential to automate part of the comparison process, freeing the examiner to focus on other tasks, which is important in busy, backlogged crime labs. Finally, the method o#11;ers the unique chance to directly link an evidence mark to the tool that produced it while reducing potential damage to the evidence.

  19. Ultrascale Visualization Climate Data Analysis Tools (UV-CDAT) Final Report

    SciTech Connect (OSTI)

    Williams, Dean N. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2014-05-19T23:59:59.000Z

    A partnership across government, academic, and private sectors has created a novel system that enables climate researchers to solve current and emerging data analysis and visualization challenges. The Ultrascale Visualization Climate Data Analysis Tools (UV-CDAT) software project utilizes the Python application programming interface (API) combined with C/C++/Fortran implementations for performance-critical software that offers the best compromise between "scalability" and “ease-of-use.” The UV-CDAT system is highly extensible and customizable for high-performance interactive and batch visualization and analysis for climate science and other disciplines of geosciences. For complex, climate data-intensive computing, UV-CDAT’s inclusive framework supports Message Passing Interface (MPI) parallelism as well as taskfarming and other forms of parallelism. More specifically, the UV-CDAT framework supports the execution of Python scripts running in parallel using the MPI executable commands and leverages Department of Energy (DOE)-funded general-purpose, scalable parallel visualization tools such as ParaView and VisIt. This is the first system to be successfully designed in this way and with these features. The climate community leverages these tools and others, in support of a parallel client-server paradigm, allowing extreme-scale, server-side computing for maximum possible speed-up.

  20. COLLABORATIVE RESEARCH: Parallel Analysis Tools and New Visualization Techniques for Ultra-Large Climate Data Set

    SciTech Connect (OSTI)

    middleton, Don [Co-PI; Haley, Mary

    2014-12-10T23:59:59.000Z

    ParVis was a project funded under LAB 10-05: “Earth System Modeling: Advanced Scientific Visualization of Ultra-Large Climate Data Sets”. Argonne was the lead lab with partners at PNNL, SNL, NCAR and UC-Davis. This report covers progress from January 1st, 2013 through Dec 1st, 2014. Two previous reports covered the period from Summer, 2010, through September 2011 and October 2011 through December 2012, respectively. While the project was originally planned to end on April 30, 2013, personnel and priority changes allowed many of the institutions to continue work through FY14 using existing funds. A primary focus of ParVis was introducing parallelism to climate model analysis to greatly reduce the time-to-visualization for ultra-large climate data sets. Work in the first two years was conducted on two tracks with different time horizons: one track to provide immediate help to climate scientists already struggling to apply their analysis to existing large data sets and another focused on building a new data-parallel library and tool for climate analysis and visualization that will give the field a platform for performing analysis and visualization on ultra-large datasets for the foreseeable future. In the final 2 years of the project, we focused mostly on the new data-parallel library and associated tools for climate analysis and visualization.

  1. Scalability of Comparative Analysis, Novel Algorithms and Tools (MICW - Metagenomics Informatics Challenges Workshop: 10K Genomes at a Time)

    ScienceCinema (OSTI)

    Mavrommatis, Kostas [JGI

    2013-01-22T23:59:59.000Z

    DOE JGI's Kostas Mavrommatis, chair of the Scalability of Comparative Analysis, Novel Algorithms and Tools panel, at the Metagenomics Informatics Challenges Workshop held at the DOE JGI on October 12-13, 2011.

  2. Scalability of Comparative Analysis, Novel Algorithms and Tools (MICW - Metagenomics Informatics Challenges Workshop: 10K Genomes at a Time)

    SciTech Connect (OSTI)

    Mavrommatis, Kostas [JGI] [JGI

    2011-10-12T23:59:59.000Z

    DOE JGI's Kostas Mavrommatis, chair of the Scalability of Comparative Analysis, Novel Algorithms and Tools panel, at the Metagenomics Informatics Challenges Workshop held at the DOE JGI on October 12-13, 2011.

  3. Analysis of drilling fluid rheology and tool joint effect to reduce errors in hydraulics calculations 

    E-Print Network [OSTI]

    Viloria Ochoa, Marilyn

    2006-10-30T23:59:59.000Z

    .........................................................................45 V HYDRAULICS ....................................................................................49 5.1 Friction Pressure Loss Calculation..........................................50 VI TOOL JOINT... ......................................................................................71 6.1 Weld-On Tool Joint..................................................................71 VII STUDY APPROACHES TO ESTIMATE PRESSURE LOSSES BY CORRECTING FOR TOOL JOINT LOSSES .....................................77 7...

  4. Tools for Accurate and Efficient Analysis of Complex Evolutionary Mechanisms in Microbial Genomes. Final Report

    SciTech Connect (OSTI)

    Nakhleh, Luay

    2014-03-12T23:59:59.000Z

    I proposed to develop computationally efficient tools for accurate detection and reconstruction of microbes' complex evolutionary mechanisms, thus enabling rapid and accurate annotation, analysis and understanding of their genomes. To achieve this goal, I proposed to address three aspects. (1) Mathematical modeling. A major challenge facing the accurate detection of HGT is that of distinguishing between these two events on the one hand and other events that have similar "effects." I proposed to develop a novel mathematical approach for distinguishing among these events. Further, I proposed to develop a set of novel optimization criteria for the evolutionary analysis of microbial genomes in the presence of these complex evolutionary events. (2) Algorithm design. In this aspect of the project, I proposed to develop an array of e#14;cient and accurate algorithms for analyzing microbial genomes based on the formulated optimization criteria. Further, I proposed to test the viability of the criteria and the accuracy of the algorithms in an experimental setting using both synthetic as well as biological data. (3) Software development. I proposed the #12;nal outcome to be a suite of software tools which implements the mathematical models as well as the algorithms developed.

  5. An Analysis of Energy Savings Possible Through Advances in Automotive Tooling Technology

    SciTech Connect (OSTI)

    Rick Schmoyer, RLS

    2004-12-03T23:59:59.000Z

    The use of lightweight and highly formable advanced materials in automobile and truck manufacturing has the potential to save fuel. Advances in tooling technology would promote the use of these materials. This report describes an energy savings analysis performed to approximate the potential fuel savings and consequential carbon-emission reductions that would be possible because of advances in tooling in the manufacturing of, in particular, non-powertrain components of passenger cars and heavy trucks. Separate energy analyses are performed for cars and heavy trucks. Heavy trucks are considered to be Class 7 and 8 trucks (trucks rated over 26,000 lbs gross vehicle weight). A critical input to the analysis is a set of estimates of the percentage reductions in weight and drag that could be achieved by the implementation of advanced materials, as a consequence of improved tooling technology, which were obtained by surveying tooling industry experts who attended a DOE Workshop, Tooling Technology for Low-Volume Vehicle Production, held in Seattle and Detroit in October and November 2003. The analysis is also based on 2001 fuel consumption totals and on energy-audit component proportions of fuel use due to drag, rolling resistance, and braking. The consumption proportions are assumed constant over time, but an allowance is made for fleet growth. The savings for a particular component is then the product of total fuel consumption, the percentage reduction of the component, and the energy audit component proportion. Fuel savings estimates for trucks also account for weight-limited versus volume-limited operations. Energy savings are assumed to be of two types: (1) direct energy savings incurred through reduced forces that must be overcome to move the vehicle or to slow it down in braking. and (2) indirect energy savings through reductions in the required engine power, the production and transmission of which incur thermodynamic losses, internal friction, and other inefficiencies. Total savings for an energy use component are estimated by scaling up the direct savings with an approximate total-to-direct savings ratio. Market penetration for new technology vehicles is estimated from projections about scrappage. Retrofit savings are assumed negligible, but savings are also assumed to accrue with increases in the fleet size, based on economic growth forecasts. It is assumed that as vehicles in the current fleet are scrapped, they are replaced with advanced-technology vehicles. Saving estimates are based on proportions of new vehicles, rather than new-vehicle mileages. In practice, of course, scrapped vehicles are often replaced with used vehicles, and used vehicles are replaced with new vehicles. Because new vehicles are typically driven more than old, savings estimates based on count rather than mileage proportions tend to be biased down (i.e., conservative). Savings are expressed in terms of gallons of fuel saved, metric tons of CO2 emissions reductions, and percentages relative to 2001 levels of fuel and CO2. The sensitivity of the savings projections to inputs such as energy-audit proportions of fuel consumed for rolling resistance, drag, braking, etc. is assessed by considering different scenarios. Though based on many approximations, the estimates approximate the potential energy savings possible because of improvements in tooling. For heavy trucks, annual diesel savings of 2.4-6.8 percent, and cumulative savings on the order of 54-154 percent, of 2001 consumption could accrue by 2050. By 2050, annual gasoline savings of 2.8-12 percent, and cumulative savings on the order of 83-350 percent of 2001 consumption could accrue for cars.

  6. The Use Of Computational Human Performance Modeling As Task Analysis Tool

    SciTech Connect (OSTI)

    Jacuqes Hugo; David Gertman

    2012-07-01T23:59:59.000Z

    During a review of the Advanced Test Reactor safety basis at the Idaho National Laboratory, human factors engineers identified ergonomic and human reliability risks involving the inadvertent exposure of a fuel element to the air during manual fuel movement and inspection in the canal. There were clear indications that these risks increased the probability of human error and possible severe physical outcomes to the operator. In response to this concern, a detailed study was conducted to determine the probability of the inadvertent exposure of a fuel element. Due to practical and safety constraints, the task network analysis technique was employed to study the work procedures at the canal. Discrete-event simulation software was used to model the entire procedure as well as the salient physical attributes of the task environment, such as distances walked, the effect of dropped tools, the effect of hazardous body postures, and physical exertion due to strenuous tool handling. The model also allowed analysis of the effect of cognitive processes such as visual perception demands, auditory information and verbal communication. The model made it possible to obtain reliable predictions of operator performance and workload estimates. It was also found that operator workload as well as the probability of human error in the fuel inspection and transfer task were influenced by the concurrent nature of certain phases of the task and the associated demand on cognitive and physical resources. More importantly, it was possible to determine with reasonable accuracy the stages as well as physical locations in the fuel handling task where operators would be most at risk of losing their balance and falling into the canal. The model also provided sufficient information for a human reliability analysis that indicated that the postulated fuel exposure accident was less than credible.

  7. LogTool: A Flexible, Publicly Available Data Analysis Tool Providing Graphical Analysis, Extraction of Data Subsets and Daytyping for Multiple Data Formats

    E-Print Network [OSTI]

    Qualmann, R. L.; Goudge, P.; Baker, M.

    2007-01-01T23:59:59.000Z

    data collected for use in the AIRMaster+ compressed air simulation software. LogTool v1 was an application comprising Excel VBA modules and Visual Basic 6.0 modules. It stored logger data in hidden Excel worksheets. LogTool v2 is written... and flexible process as described below. Getting Started When LogTool is initiated, a ?splash? screen will appear providing the version and a brief description of the software. Click ?Continue? to open a blank main screen as shown in Figure 1. The ?Help...

  8. DAESA --a Matlab Tool for Structural Analysis of Differential-Algebraic Equations: Theory

    E-Print Network [OSTI]

    Nedialkov, Nedialko S. "Ned"

    design systems (GPROMS, MAPLESIM, SIMULINK, various tools based on the MODELICA language, etc. [Cameron

  9. UV-Laser-Ablation-Combustion-GC-IRMS a tool for on-line analysis of intra-annual

    E-Print Network [OSTI]

    UV-Laser-Ablation-Combustion-GC-IRMS a tool for on-line analysis of intra-annual variation of d13C standards which are also ablated by laser shots and combusted. CO2 Standard gas is needed for mass conventional method (elemental analysis-IRMS) indicated a high level of accuracy of the Laser ablation

  10. Appendix D: Video Analysis of Motion Analyzing pictures (movies or videos) is a powerful tool for understanding how objects move.

    E-Print Network [OSTI]

    Minnesota, University of

    D - 1 Appendix D: Video Analysis of Motion Analyzing pictures (movies or videos) is a powerful tool for understanding how objects move. Like most forms of data, video is most easily analyzed using a computer and data of one such program: the video analysis application written in LabVIEWTM. LabVIEWTM is a general

  11. Test results of a corrosion logging technique using electromagnetic thickness and pipe analysis logging tools

    SciTech Connect (OSTI)

    Iliyan, I.S.; Brown, G.A.; Cotton, W.J. Jr.

    1983-04-01T23:59:59.000Z

    Recent innovations in subsurface corrosion practices of the Arabian American Oil Co. (ARAMCO) have reduced logging and workover costs substantially and have permitted the detection of corrosion in the outer string of two concentric casing strings. At the request of ARAMCO, Schlumberger conducted test under both simulated and field conditions. Results showed that the data required to evaluate casing corrosion in a 7-in.X9 5/8-in. completion can be obtained during a single logging run using a 21.6-in. coil spacing electromagnetic thickness tool (ETT-A /SUP TM/ ) sonde (as opposed to two runs with 17.6-in. and 21.6-in. sondes previously used). In addition, corrosion of the outer string of 9 5/8-in. or 13 3/8-in. casing can be detected by using the results of the ETT-A logs and pipe-analysis tool (PAT) logs or caliper logs. To date, the application of this technique has been very successful in ARAMCO's operations.

  12. Functional-analysis based tool for testing quark-hadron duality

    E-Print Network [OSTI]

    Irinel Caprini; Maarten Golterman; Santiago Peris

    2014-07-09T23:59:59.000Z

    Quark-hadron duality is a key concept in QCD, allowing for the description of physical hadronic observables in terms of quark-gluon degrees of freedom. The modern theoretical framework for its implementation is Wilson's operator product expansion (OPE), supplemented by analytic extrapolation from large Euclidean momenta, where the OPE is defined, to the Minkowski axis, where observable quantities are defined. Recently, the importance of additional terms in the expansion of QCD correlators near the Minkowski axis, responsible for quark-hadron duality violations (DVs), was emphasized. In this paper we introduce a mathematical tool that might be useful for the study of DVs in QCD. It is based on finding the minimal distance, measured in the $L^\\infty$ norm along a contour in the complex momentum plane, between a class of admissible functions containing the physical amplitude and the asymptotic expansion predicted by the OPE. This minimal distance is given by the norm of a Hankel matrix that can be calculated exactly, using as input the experimental spectral function on a finite interval of the timelike axis. We also comment on the relation between the new functional tool and the more commonly used $\\chi^2$-based analysis. The approach is illustrated on a toy model for the QCD polarization function recently proposed in the literature.

  13. New tools for the systematic analysis and visualization of electronic excitations. II. Applications

    SciTech Connect (OSTI)

    Plasser, Felix, E-mail: felix.plasser@iwr.uni-heidelberg.de; Bäppler, Stefanie A.; Wormit, Michael; Dreuw, Andreas [Interdisciplinary Center for Scientific Computing, Ruprecht-Karls-University, Im Neuenheimer Feld 368, 69120 Heidelberg (Germany)

    2014-07-14T23:59:59.000Z

    The excited states of a diverse set of molecules are examined using a collection of newly implemented analysis methods. These examples expose the particular power of three of these tools: (i) natural difference orbitals (the eigenvectors of the difference density matrix) for the description of orbital relaxation effects, (ii) analysis of the one-electron transition density matrix in terms of an electron-hole picture to identify charge resonance and excitonic correlation effects, and (iii) state-averaged natural transition orbitals for a compact simultaneous representation of several states. Furthermore, the utility of a wide array of additional analysis methods is highlighted. Five molecules with diverse excited state characteristics are chosen for these tasks: pyridine as a prototypical small heteroaromatic molecule, a model system of six neon atoms to study charge resonance effects, hexatriene in its neutral and radical cation forms to exemplify the cases of double excitations and spin-polarization, respectively, and a model iridium complex as a representative metal organic compound. Using these examples a number of phenomena, which are at first sight unexpected, are highlighted and their physical significance is discussed. Moreover, the generality of the conclusions of this paper is verified by a comparison of single- and multireference ab initio methods.

  14. Overview of New Tools to Perform Safety Analysis: BWR Station Black Out Test Case

    SciTech Connect (OSTI)

    D. Mandelli; C. Smith; T. Riley; J. Nielsen; J. Schroeder; C. Rabiti; A. Alfonsi; Cogliati; R. Kinoshita; V. Pasucci; B. Wang; D. Maljovec

    2014-06-01T23:59:59.000Z

    Dynamic Probabilistic Risk Assessment (DPRA) methodologies couple system simulator codes (e.g., RELAP, MELCOR) with simulation controller codes (e.g., RAVEN, ADAPT). While system simulator codes accurately model system dynamics deterministically, simulation controller codes introduce both deterministic (e.g., system control logic, operating procedures) and stochastic (e.g., component failures, parameter uncertainties) elements into the simulation. Typically, a DPRA is performed by: 1) sampling values of a set of parameters from the uncertainty space of interest (using the simulation controller codes), and 2) simulating the system behavior for that specific set of parameter values (using the system simulator codes). For complex systems, one of the major challenges in using DPRA methodologies is to analyze the large amount of information (i.e., large number of scenarios ) generated, where clustering techniques are typically employed to allow users to better organize and interpret the data. In this paper, we focus on the analysis of a nuclear simulation dataset that is part of the Risk Informed Safety Margin Characterization (RISMC) Boiling Water Reactor (BWR) station blackout (SBO) case study. We apply a software tool that provides the domain experts with an interactive analysis and visualization environment for understanding the structures of such high-dimensional nuclear simulation datasets. Our tool encodes traditional and topology-based clustering techniques, where the latter partitions the data points into clusters based on their uniform gradient flow behavior. We demonstrate through our case study that both types of clustering techniques complement each other in bringing enhanced structural understanding of the data.

  15. Project Final Report: Building a Community Infrastructure for Scalable On-Line Performance Analysis Tools around Open|SpeedShop

    SciTech Connect (OSTI)

    Galarowicz, James

    2014-01-06T23:59:59.000Z

    In this project we created a community tool infrastructure for program development tools targeting Petascale class machines and beyond. This includes tools for performance analysis, debugging, and correctness tools, as well as tuning and optimization frameworks. The developed infrastructure provides a comprehensive and extensible set of individual tool building components. We started with the basic elements necessary across all tools in such an infrastructure followed by a set of generic core modules that allow a comprehensive performance analysis at scale. Further, we developed a methodology and workflow that allows others to add or replace modules, to integrate parts into their own tools, or to customize existing solutions. In order to form the core modules, we built on the existing Open|SpeedShop infrastructure and decomposed it into individual modules that match the necessary tool components. At the same time, we addressed the challenges found in performance tools for petascale systems in each module. When assembled, this instantiation of community tool infrastructure provides an enhanced version of Open|SpeedShop, which, while completely different in its architecture, provides scalable performance analysis for petascale applications through a familiar interface. This project also built upon and enhances capabilities and reusability of project partner components as specified in the original project proposal. The overall project team’s work over the project funding cycle was focused on several areas of research, which are described in the following sections. The reminder of this report also highlights related work as well as preliminary work that supported the project. In addition to the project partners funded by the Office of Science under this grant, the project team included several collaborators who contribute to the overall design of the envisioned tool infrastructure. In particular, the project team worked closely with the other two DOE NNSA laboratories Los Alamos and Sandia leveraging co-funding for Krell by ASC’s Common Computing Environment (CCE) program as laid out in the original proposal. The ASC CCE co-funding, coordinated through LLNL, was for 50% of the total project funding, with the ASC CCE portion of the funding going entirely to Krell, while the ASCR funding itself was split between Krell and the funded partners. This report covers the entire project from both funding sources. Additionally, the team leveraged the expertise of software engineering researchers from Carnegie Mellon University, who specialize in software framework design, in order to achieve a broadly acceptable component framework. The Component Based Tool Framework (CBTF) software has been released to the community. Information related to the project and the released software can be found on the CBTF wiki page at: http://sourceforge.net/p/cbtf/wiki/Home

  16. SASfit: A comprehensive tool for small-angle scattering data analysis

    E-Print Network [OSTI]

    Breßler, Ingo; Thünemann, Andreas F

    2015-01-01T23:59:59.000Z

    Small-angle X-ray and neutron scattering experiments are used in many fields of the life sciences and condensed matter research to obtain answers to questions about the shape and size of nano-sized structures, typically in the range of 1 to 100 nm. It provides good statistics for large numbers of structural units for short measurement times. With the ever-increasing quantity and quality of data acquisition, the value of appropriate tools that are able to extract valuable information is steadily increasing. SASfit has been one of the mature programs for small-angle scattering data analysis available for many years. We describe the basic data processing and analysis work-flow along with recent developments in the SASfit program package (version 0.94.6). They include (i) advanced algorithms for reduction of oversampled data sets (ii) improved confidence assessment in the optimized model parameters and (iii) a flexible plug-in system for custom user-provided models. A scattering function of a mass fractal model o...

  17. Tool path generation and 3D tolerance analysis for free-form surfaces

    E-Print Network [OSTI]

    Choi, Young Keun

    2005-08-29T23:59:59.000Z

    path calculation is the method by which the trajectories of the tool is constrained to lie on the designed part. Commonly used tool path generations are as follows: 1. planar section curve 2. iso-parametric curve 3. offset curve 4. projection curve 5... sections as tool path 11 Fig. 4. Surfaces in APT are (a) the overall length of tool path is very large, (b) the tool paths do not take into account the geometry of the designed part. 2. Iso-parametric curve: With the introduction of parametric patches...

  18. 7.09 ERGONOMIC ANALYSIS IN ORDER TO DESIGN A WORK HELP TOOL : SIGOONS Corinne Chabaud & Sandrine Cazabat

    E-Print Network [OSTI]

    Winckler, Marco Antonio Alba

    7.09 ERGONOMIC ANALYSIS IN ORDER TO DESIGN A WORK HELP TOOL : SIGOONS Corinne Chabaud & Sandrine. INTRODUCTION This study issue is ergonomics part in design processes. We will describe how ergonomics tackle results and ambitions. 2. CONTEXT AND OBJECTIVES 2. 1 Context The present ergonomic study has been

  19. New test procedure evaluates quality and accuracy of energy analysis tools for the residential building retrofit market.

    E-Print Network [OSTI]

    New test procedure evaluates quality and accuracy of energy analysis tools for the residential the Building Energy Simulation Test for Existing Homes (BESTEST-EX), a method for diagnosing and correcting physics and utility bill calibration test cases, which soft- ware developers can use to compare

  20. Development of a prognostic tool to perform reliability analysis Mohamed El-Koujok, Rafael Gouriveau & Noureddine Zerhouni

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    of the provisional reliability of an equipment as well as its remaining useful life allows avoiding inopportuneDevelopment of a prognostic tool to perform reliability analysis Mohamed El-Koujok, Rafael is recognized as a key feature as the estimation of the remaining useful life of an equipment allows avoiding

  1. A life cycle cost analysis framework for geologic storage of hydrogen : a user's tool.

    SciTech Connect (OSTI)

    Kobos, Peter Holmes; Lord, Anna Snider; Borns, David James; Klise, Geoffrey T.

    2011-09-01T23:59:59.000Z

    The U.S. Department of Energy (DOE) has an interest in large scale hydrogen geostorage, which could offer substantial buffer capacity to meet possible disruptions in supply or changing seasonal demands. The geostorage site options being considered are salt caverns, depleted oil/gas reservoirs, aquifers and hard rock caverns. The DOE has an interest in assessing the geological, geomechanical and economic viability for these types of geologic hydrogen storage options. This study has developed an economic analysis methodology and subsequent spreadsheet analysis to address costs entailed in developing and operating an underground geologic storage facility. This year the tool was updated specifically to (1) incorporate more site-specific model input assumptions for the wells and storage site modules, (2) develop a version that matches the general format of the HDSAM model developed and maintained by Argonne National Laboratory, and (3) incorporate specific demand scenarios illustrating the model's capability. Four general types of underground storage were analyzed: salt caverns, depleted oil/gas reservoirs, aquifers, and hard rock caverns/other custom sites. Due to the substantial lessons learned from the geological storage of natural gas already employed, these options present a potentially sizable storage option. Understanding and including these various geologic storage types in the analysis physical and economic framework will help identify what geologic option would be best suited for the storage of hydrogen. It is important to note, however, that existing natural gas options may not translate to a hydrogen system where substantial engineering obstacles may be encountered. There are only three locations worldwide that currently store hydrogen underground and they are all in salt caverns. Two locations are in the U.S. (Texas), and are managed by ConocoPhillips and Praxair (Leighty, 2007). The third is in Teeside, U.K., managed by Sabic Petrochemicals (Crotogino et al., 2008; Panfilov et al., 2006). These existing H{sub 2} facilities are quite small by natural gas storage standards. The second stage of the analysis involved providing ANL with estimated geostorage costs of hydrogen within salt caverns for various market penetrations for four representative cities (Houston, Detroit, Pittsburgh and Los Angeles). Using these demand levels, the scale and cost of hydrogen storage necessary to meet 10%, 25% and 100% of vehicle summer demands was calculated.

  2. Analysis of Optics and Mask Contamination in SEMATECH EUV Micro-Exposure Tools

    E-Print Network [OSTI]

    Wuest, Andrea

    2008-01-01T23:59:59.000Z

    of Optics and Mask Contamination in SEMATECH EUV MioroTools IEUVI Optics Contamination/Lifetime TWG Sapporo,of spot inside visible contamination. sputter time (min) c

  3. Review and comparison of web- and disk-based tools for residentialenergy analysis

    SciTech Connect (OSTI)

    Mills, Evan

    2002-08-25T23:59:59.000Z

    There exist hundreds of building energy software tools, both web- and disk-based. These tools exhibit considerable range in approach and creativity, with some being highly specialized and others able to consider the building as a whole. However, users are faced with a dizzying array of choices and, often, conflicting results. The fragmentation of development and deployment efforts has hampered tool quality and market penetration. The purpose of this review is to provide information for defining the desired characteristics of residential energy tools, and to encourage future tool development that improves on current practice. This project entails (1) creating a framework for describing possible technical and functional characteristics of such tools, (2) mapping existing tools onto this framework, (3) exploring issues of tool accuracy, and (4) identifying ''best practice'' and strategic opportunities for tool design. evaluated 50 web-based residential calculators, 21 of which we regard as ''whole-house'' tools(i.e., covering a range of end uses). Of the whole-house tools, 13 provide open-ended energy calculations, 5 normalize the results to actual costs (a.k.a ''bill-disaggregation tools''), and 3 provide both options. Across the whole-house tools, we found a range of 5 to 58 house-descriptive features (out of 68 identified in our framework) and 2 to 41 analytical and decision-support features (55 possible). We also evaluated 15 disk-based residential calculators, six of which are whole-house tools. Of these tools, 11 provide open-ended calculations, 1 normalizes the results to actual costs, and 3 provide both options. These tools offered ranges of 18 to 58 technical features (70 possible) and 10 to 40 user- and decision-support features (56 possible). The comparison shows that such tools can employ many approaches and levels of detail. Some tools require a relatively small number of well-considered inputs while others ask a myriad of questions and still miss key issues. The value of detail has a lot to do with the type of question(s) being asked by the user (e.g., the availability of dozens of miscellaneous appliances is immaterial for a user attempting to evaluate the potential for space-heating savings by installing a new furnace). More detail does not, according to our evaluation, automatically translate into a ''better'' or ''more accurate'' tool. Efforts to quantify and compare the ''accuracy'' of these tools are difficult at best, and prior tool-comparison studies have not undertaken this in a meaningful way. The ability to evaluate accuracy is inherently limited by the availability of measured data. Furthermore, certain tool outputs can only be measured against ''actual'' values that are themselves calculated (e.g., HVAC sizing), while others are rarely if ever available (e.g., measured energy use or savings for specific measures). Similarly challenging is to understand the sources of inaccuracies. There are many ways in which quantitative errors can occur in tools, ranging from programming errors to problems inherent in a tool's design. Due to hidden assumptions and non-variable ''defaults'', most tools cannot be fully tested across the desirable range of building configurations, operating conditions, weather locations, etc. Many factors conspire to confound performance comparisons among tools. Differences in inputs can range from weather city, to types of HVAC systems, to appliance characteristics, to occupant-driven effects such as thermostat management. Differences in results would thus no doubt emerge from an extensive comparative exercise, but the sources or implications of these differences for the purposes of accuracy evaluation or tool development would remain largely unidentifiable (especially given the paucity of technical documentation available for most tools). For the tools that we tested, the predicted energy bills for a single test building ranged widely (by nearly a factor of three), and far more so at the end-use level. Most tools over-predicted energy bills and all over-predicted consumption. Var

  4. Analysis of drilling fluid rheology and tool joint effect to reduce errors in hydraulics calculations

    E-Print Network [OSTI]

    Viloria Ochoa, Marilyn

    2006-10-30T23:59:59.000Z

    This study presents a simplified and accurate procedure for selecting the rheological model which best fits the rheological properties of a given non- Newtonian fluid and introduces five new approaches to correct for tool joint losses from expansion...

  5. Case study as a teaching tool integrating design, energy, and economic analysis

    E-Print Network [OSTI]

    McBride, Jacquelin Spangler

    1984-01-01T23:59:59.000Z

    Architecture educators and students are challenging traditional methods of teaching technical subjects related to buildings, seeking new teaching tools and methods. The case method, developed by business and management ...

  6. Development of DOD Process Energy and Pollution Reduction (PERP) Analysis Tool 

    E-Print Network [OSTI]

    Lin, M. C. J.; Northrup, J.; Lorand, R.; Fraser, M.

    1996-01-01T23:59:59.000Z

    Research Laboratories has sponsored a program to: (1) develop a Process Energy and Pollution Reduction (PEPR) screening tool that can provide energy and emissions evaluations, and (2) identify conservation opportunities for reduced energy consumption...

  7. Evaluating state markets for residential wind systems: Results from an economic and policy analysis tool

    SciTech Connect (OSTI)

    Edwards, Jennifer L.; Wiser, Ryan; Bolinger, Mark; Forsyth, Trudy

    2004-12-01T23:59:59.000Z

    The market for small wind systems in the United States, often defined as systems less than or equal to 100 kW that produce power on the customer side of the meter, is small but growing steadily. The installed capacity of domestic small wind systems in 2002 was reportedly 15-18 MW, though the market is estimated to be growing by as much as 40 percent annually (AWEA, 2002). This growth is driven in part by recent technology advancements and cost improvements and, perhaps more importantly, by favorable policy incentives targeted at small wind systems that are offered in several states. Currently, over half of all states have incentive policies for which residential small wind installations are eligible. These incentives range from low-interest loan programs and various forms of tax advantages to cash rebates that cover as much as 60 percent of the total system cost for turbines 10 kW or smaller installed in residential applications. Most of these incentives were developed to support a ran ge of emerging renewable technologies (most notably photovoltaic systems), and were therefore not specifically designed with small wind systems in mind. As such, the question remains as to which incentive types provide the greatest benefit to small wind systems, and how states might appropriately set the level and type of incentives in the future. Furthermore, given differences in incentive types and levels across states, as well as variations in retail electricity rates and other relevant factors, it is not immediately obvious which states offer the most promising markets for small wind turbine manufacturers and installers, as well as potential residential system owners. This paper presents results from a Berkeley Lab analysis of the impact of existing and proposed state and federal incentives on the economics of grid-connected, residential small wind systems. Berkeley Lab has designed the Small Wind Analysis Tool (SWAT) to compare system economics under current incentive structures a cross all 50 states. SWAT reports three metrics to characterize residential wind economics in each state and wind resource class: (1) Break-Even Turnkey Cost (BTC): The BTC is defined as the aggregate installed system cost that would balance total customer payments and revenue over the life of the system, allowing the customer to ''break-even'' while earning a specified rate of return on the small wind ''investment.'' (2) Simple Payback (SP): The SP is the number of years it takes a customer to recoup a cash payment for a wind system and all associated costs, assuming zero discount on future revenue and payments (i.e., ignoring the time value of money). (3) Levelized Cost of Energy (LCOE): The LCOE is the levelized cost of generating a kWh of electricity over the lifetime of the system, and is calculated assuming a cash purchase for the small wind system and a 5.5 percent real discount rate. This paper presents SWAT results for a 10 kW wind turbine and turbine power production is based on a Bergey Excel system. These results are not directly applicable to turbines with different power curves and rated outputs, especially given the fact that many state incentives are set as a fixed dollar amount, and the dollar per Watt amount will vary based on the total rated turbine capacity.

  8. Cost Benefit Analysis Modeling Tool for Electric vs. ICE Airport Ground Support Equipment – Development and Results

    SciTech Connect (OSTI)

    James Francfort; Kevin Morrow; Dimitri Hochard

    2007-02-01T23:59:59.000Z

    This report documents efforts to develop a computer tool for modeling the economic payback for comparative airport ground support equipment (GSE) that are propelled by either electric motors or gasoline and diesel engines. The types of GSE modeled are pushback tractors, baggage tractors, and belt loaders. The GSE modeling tool includes an emissions module that estimates the amount of tailpipe emissions saved by replacing internal combustion engine GSE with electric GSE. This report contains modeling assumptions, methodology, a user’s manual, and modeling results. The model was developed based on the operations of two airlines at four United States airports.

  9. ALBUM: a tool for the analysis of slitless spectra and its application to ESO WFI data

    E-Print Network [OSTI]

    Christophe Martayan; Dietrich Baade; Anne-Marie Hubert; Michele Floquet; Juan Fabregat; Emmanuel Bertin

    2007-03-23T23:59:59.000Z

    ALBUM is a general-purpose tool to visualize and screen large amounts of slitless spectra. It was developed for a search for emission-line stars in SMC and LMC clusters. The observations were obtained with ESO's Wide Field Imager (WFI) and comprise ~8 million low-resolution spectra. The tool as well as the results of its application to the SMC part of the database are presented. The inferred frequency of Be stars is compared to the one in the higher-metallicity environment of the Milky Way.

  10. VEA-bility Security Metric: A Network Security Analysis Tool Melanie Tupper

    E-Print Network [OSTI]

    Zincir-Heywood, Nur

    network configurations. An administrator can then use the VEA-bility scores of different configurations the given options. These tools are important to network administrators as they strive to provide secure, yet by computer networks. For this reason, a primary objective for a network/system administrator is to maintain

  11. TILAS: A Simple Analysis Tool for Estimating Power Losses in an IGBT-Diode Pair under

    E-Print Network [OSTI]

    Kimball, Jonathan W.

    measurements the load current of a converter phase leg and the gate switching waveform of the upper IGBT. The sizing and material of heat sinks, in addition to the choice of blowers, liquid cooling, heat pumps, etc case. In [3], an analytical calculation tool for power losses in both voltage-source and current

  12. Performance Analysis of and Tool Support for Transactional Memory on BG/Q

    SciTech Connect (OSTI)

    Schindewolf, M

    2011-12-08T23:59:59.000Z

    Martin Schindewolf worked during his internship at the Lawrence Livermore National Laboratory (LLNL) under the guidance of Martin Schulz at the Computer Science Group of the Center for Applied Scientific Computing. We studied the performance of the TM subsystem of BG/Q as well as researched the possibilities for tool support for TM. To study the performance, we run CLOMP-TM. CLOMP-TM is a benchmark designed for the purpose to quantify the overhead of OpenMP and compare different synchronization primitives. To advance CLOMP-TM, we added Message Passing Interface (MPI) routines for a hybrid parallelization. This enables to run multiple MPI tasks, each running OpenMP, on one node. With these enhancements, a beneficial MPI task to OpenMP thread ratio is determined. Further, the synchronization primitives are ranked as a function of the application characteristics. To demonstrate the usefulness of these results, we investigate a real Monte Carlo simulation called Monte Carlo Benchmark (MCB). Applying the lessons learned yields the best task to thread ratio. Further, we were able to tune the synchronization by transactifying the MCB. Further, we develop tools that capture the performance of the TM run time system and present it to the application's developer. The performance of the TM run time system relies on the built-in statistics. These tools use the Blue Gene Performance Monitoring (BGPM) interface to correlate the statistics from the TM run time system with performance counter values. This combination provides detailed insights in the run time behavior of the application and enables to track down the cause of degraded performance. Further, one tool has been implemented that separates the performance counters in three categories: Successful Speculation, Unsuccessful Speculation and No Speculation. All of the tools are crafted around IBM's xlc compiler for C and C++ and have been run and tested on a Q32 early access system.

  13. OOTW COST TOOLS

    SciTech Connect (OSTI)

    HARTLEY, D.S.III; PACKARD, S.L.

    1998-09-01T23:59:59.000Z

    This document reports the results of a study of cost tools to support the analysis of Operations Other Than War (OOTW). It recommends the continued development of the Department of Defense (DoD) Contingency Operational Support Tool (COST) as the basic cost analysis tool for 00TWS. It also recommends modifications to be included in future versions of COST and the development of an 00TW mission planning tool to supply valid input for costing.

  14. Real option analysis as a decision tool in oil field developments

    E-Print Network [OSTI]

    Babajide, Abisoye (Abisoye E.)

    2007-01-01T23:59:59.000Z

    This thesis shows the applicability and value of real options analysis in developing an oil field, and how its use along with decision analysis can maximize the returns on a given project and minimize the losses. It focuses ...

  15. Exploring JavaScript and ROOT technologies to create Web-based ATLAS analysis and monitoring tools

    E-Print Network [OSTI]

    Sanchez, Arturo; The ATLAS collaboration

    2015-01-01T23:59:59.000Z

    We explore the potentialities of current web applications to create online interfaces that allow the visualization, interaction and real physics cut-based analysis and monitoring of processes trough a web browser. The project consists in the initial development of web-based and cloud computing services to allow students and researches to perform fast and very useful cut-based analysis on a browser, reading and using real data and official Monte-Carlo simulations stored in ATLAS computing facilities. Several tools are considered: ROOT, JavaScript and HTML. Our study case is the current cut-based H->ZZ->llqq analysis of the ATLAS experiment. Preliminary but satisfactory results have been obtained online; this presentation describes the tests and plans and future upgrades.

  16. Exploring JavaScript and ROOT technologies to create Web-based ATLAS analysis and monitoring tools

    E-Print Network [OSTI]

    Sanchez, Arturo; The ATLAS collaboration

    2015-01-01T23:59:59.000Z

    We explore the potentialities of current web applications to create online interfaces that allow the visualization, interaction and real physics cut-based analysis and monitoring of processes trough a web browser. The project consists in the initial development of web-based and cloud computing services to allow students and researches to perform fast and very useful cut-based analysis on a browser, reading and using real data and official Monte-Carlo simulations stored in ATLAS computing facilities. Several tools are considered: ROOT, JavaScript and HTML. Our study case is the current cut-based $H \\rightarrow ZZ \\rightarrow llqq$ analysis of the ATLAS experiment. Preliminary but satisfactory results have been obtained online.

  17. Modeling of Tool Wear and Tool Fracture in Micromilling

    E-Print Network [OSTI]

    Shiosaki, Dominic

    2012-02-14T23:59:59.000Z

    of aluminum and titanium. Finite element analysis and tool modeling compliment experimental data. Cumulative tool wear based on Taylor model shows decreasing tool life with increasing feed rate and increasing cutting speed on aluminum. Inconsistent results...

  18. arXiv:1312.1524v1[math.NA]5Dec2013 THE BUBBLE TRANSFORM: A NEW TOOL FOR ANALYSIS OF

    E-Print Network [OSTI]

    Winther, Ragnar

    arXiv:1312.1524v1[math.NA]5Dec2013 THE BUBBLE TRANSFORM: A NEW TOOL FOR ANALYSIS OF FINITE ELEMENT estimates for various finite element methods. In particular, for the analysis of mixed finite element be very useful, but hard to construct, is the analysis of the so-called p-version of the finite element

  19. Tools of the Trade Region of interest analysis for fMRI

    E-Print Network [OSTI]

    Poldrack, Russ

    of California Los Angeles, Los Angeles, CA, USA A common approach to the analysis of fMRI data involves on the resulting data if the selection of the ROI was based on the same contrast; because the region was chosen assumptions. The first reason to perform an ROI analysis is simply to explore one's data. In complex designs

  20. Energy Analysis and Diagnostics: A Computer Based Tool for Industrial Self Assessment

    E-Print Network [OSTI]

    Gopalakrishnan, B.; Plummer, R. W.; Nagarajan, S.; Kolluri, R.

    of recommending ECOs in areas such as boilers, motor selection, analysis of belt driven systems, destratification, insulation of heated surfaces, and air compressor operation. The system has been designed so as to query the industrial user on aspects related...

  1. Project Programming and Commissioning as a Risk Mitigation and Threat Analysis Tool

    E-Print Network [OSTI]

    Weiss, M. L.

    2006-01-01T23:59:59.000Z

    beyond traditional disciplines including risk/threat analysis and mitigation programs. This paper discusses the growing trend of using a commissioning approach as a documentation process for the validation requirements, which are documented in the study...

  2. Analysis Tools for Sizing and Placement of Energy Storage for Grid Applications - A Literature Review

    SciTech Connect (OSTI)

    Hoffman, Michael G.; Kintner-Meyer, Michael CW; Sadovsky, Artyom; DeSteese, John G.

    2010-09-24T23:59:59.000Z

    The purpose of this report was to review pertinent literature and studies that might reveal models capable of optimizing the siting, sizing and economic value of energy storage in the future smart grid infrastructure. Energy storage technology and utility system deployment have been subjects of intense research and development for over three decades. During this time, many models have been developed that consider energy storage implementation in the electric power industry and other applications. Nevertheless, this review of literature discovered no actual models and only a few software tools that relate specifically to the application environment and expected requirements of the evolving smart grid infrastructure. This report indicates the existing need for such a model and describes a pathway for developing it.

  3. Interval Data Analysis with the Energy Charting and Metrics Tool (ECAM)

    SciTech Connect (OSTI)

    Taasevigen, Danny J.; Katipamula, Srinivas; Koran, William

    2011-07-07T23:59:59.000Z

    Analyzing whole building interval data is an inexpensive but effective way to identify and improve building operations, and ultimately save money. Utilizing the Energy Charting and Metrics Tool (ECAM) add-in for Microsoft Excel, building operators and managers can begin implementing changes to their Building Automation System (BAS) after trending the interval data. The two data components needed for full analyses are whole building electricity consumption (kW or kWh) and outdoor air temperature (OAT). Using these two pieces of information, a series of plots and charts and be created in ECAM to monitor the buildings performance over time, gain knowledge of how the building is operating, and make adjustments to the BAS to improve efficiency and start saving money.

  4. The Ultra-scale Visualization Climate Data Analysis Tools (UV-CDAT): Data Analysis and Visualization for Geoscience Data

    SciTech Connect (OSTI)

    Doutriaux, Charles [Lawrence Livermore National Laboratory (LLNL); Patchett, John [Los Alamos National Laboratory (LANL); Williams, Dean N. [Lawrence Livermore National Laboratory (LLNL); Miller, Ross G [ORNL; Steed, Chad A [ORNL; Krishnan, Harinarayan [Lawrence Berkeley National Laboratory (LBNL); Silva, Claudio T. [New York University, Center for Urban Sciences; Chaudhary, Aashish [Kitware; Bremer, Peer-Timo [Lawrence Livermore National Laboratory (LLNL); Pugmire, Dave [ORNL; Bethel, E Wes [Lawrence Berkeley National Laboratory (LBNL); Childs, Hank [Lawrence Berkeley National Laboratory (LBNL); Prabhat, [Lawrence Berkeley National Laboratory (LBNL); Geveci, Berk [Kitware; Bauer, Andy [Kitware; Pletzer, Alexander [Tech-X Corporation; Poco, Jorge [Polytechnic Institute of New York University; Ellqvist, Tommy [New York University; Santos, Emanuele [Universidade Federal do Ceara, Ceara, Brazil; Potter, Gerald [National Aeronautics and Space Administration (NASA); Smith, Brian E [ORNL; Maxwell, Thomas P. [National Aeronautics and Space Administration (NASA); Kindig, Dave [Tech-X Corporation; Koop, David [New York University

    2013-01-01T23:59:59.000Z

    To support interactive visualization and analysis of complex, large-scale climate data sets, UV-CDAT integrates a powerful set of scientific computing libraries and applications to foster more efficient knowledge discovery. Connected through a provenance framework, the UV-CDAT components can be loosely coupled for fast integration or tightly coupled for greater functionality and communication with other components. This framework addresses many challenges in interactive visual analysis of distributed large-scale data for the climate community.

  5. The Ultra-scale Visualization Climate Data Analysis Tools (UV-CDAT): Data Analysis and Visualization for Geoscience Data

    SciTech Connect (OSTI)

    Williams, Dean N. [Lawrence Livermore National Laboratory (LLNL); Bremer, Peer-Timo [Lawrence Livermore National Laboratory (LLNL); Doutriaux, Charles [Lawrence Livermore National Laboratory (LLNL); Patchett, John [Los Alamos National Laboratory (LANL); Williams, Sean [Los Alamos National Laboratory (LANL); Shipman, Galen M [ORNL; Miller, Ross G [ORNL; Pugmire, Dave [ORNL; Smith, Brian E [ORNL; Steed, Chad A [ORNL; Bethel, E Wes [Lawrence Berkeley National Laboratory (LBNL); Childs, Hank [Lawrence Berkeley National Laboratory (LBNL); Krishnan, Harinarayan [Lawrence Berkeley National Laboratory (LBNL); Silva, Claudio T. [New York University, Center for Urban Sciences; Santos, Emanuele [Universidade Federal do Ceara, Ceara, Brazil; Koop, David [New York University; Ellqvist, Tommy [New York University; Poco, Jorge [Polytechnic Institute of New York University; Geveci, Berk [Kitware; Chaudhary, Aashish [Kitware; Bauer, Andy [Kitware; Pletzer, Alexander [Tech-X Corporation; Kindig, Dave [Tech-X Corporation; Potter, Gerald [National Aeronautics and Space Administration (NASA); Maxwell, Thomas P. [National Aeronautics and Space Administration (NASA)

    2013-01-01T23:59:59.000Z

    To support interactive visualization and analysis of complex, large-scale climate data sets, UV-CDAT integrates a powerful set of scientific computing libraries and applications to foster more efficient knowledge discovery. Connected through a provenance framework, the UV-CDAT components can be loosely coupled for fast integration or tightly coupled for greater functionality and communication with other components. This framework addresses many challenges in the interactive visual analysis of distributed large-scale data for the climate community.

  6. The Ultra-scale Visualization Climate Data Analysis Tools (UV-CDAT): Data Analysis and Visualization for Geoscience Data

    SciTech Connect (OSTI)

    Williams, Dean [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Doutriaux, Charles [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Patchett, John [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Williams, Sean [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Shipman, Galen [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Miller, Ross [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Steed, Chad [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Krishnan, Harinarayan [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Silva, Claudio [NYU Polytechnic School of Engineering, New York, NY (United States); Chaudhary, Aashish [Kitware, Inc., Clifton Park, NY (United States); Bremer, Peer-Timo [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Pugmire, David [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Bethel, E. Wes [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Childs, Hank [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Prabhat, Mr. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Geveci, Berk [Kitware, Inc., Clifton Park, NY (United States); Bauer, Andrew [Kitware, Inc., Clifton Park, NY (United States); Pletzer, Alexander [Tech-X Corp., Boulder, CO (United States); Poco, Jorge [NYU Polytechnic School of Engineering, New York, NY (United States); Ellqvist, Tommy [NYU Polytechnic School of Engineering, New York, NY (United States); Santos, Emanuele [Federal Univ. of Ceara, Fortaleza (Brazil); Potter, Gerald [NASA Johnson Space Center, Houston, TX (United States); Smith, Brian [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Maxwell, Thomas [NASA Johnson Space Center, Houston, TX (United States); Kindig, David [Tech-X Corp., Boulder, CO (United States); Koop, David [NYU Polytechnic School of Engineering, New York, NY (United States)

    2013-05-01T23:59:59.000Z

    To support interactive visualization and analysis of complex, large-scale climate data sets, UV-CDAT integrates a powerful set of scientific computing libraries and applications to foster more efficient knowledge discovery. Connected through a provenance framework, the UV-CDAT components can be loosely coupled for fast integration or tightly coupled for greater functionality and communication with other components. This framework addresses many challenges in the interactive visual analysis of distributed large-scale data for the climate community.

  7. Appendix D: Video Analysis of Motion Analyzing pictures (movies or videos) is a powerful tool for understanding how objects move. Like

    E-Print Network [OSTI]

    Minnesota, University of

    D - 1 Appendix D: Video Analysis of Motion Analyzing pictures (movies or videos) is a powerful tool for understanding how objects move. Like most forms of data, video is most easily analyzed using a computer and data of one such program: the video analysis application written in LabVIEWTM. LabVIEWTM is a general- purpose

  8. Viewpoints: A High-Performance High-Dimensional Exploratory Data Analysis Tool

    E-Print Network [OSTI]

    of modern graphics boards (GPUs) to run on a single workstation or laptop. View- points is minimalist, we describe the Viewpoints package and show examples of its usage. 1. INTRODUCTION Analysis, photometric magnitude in five bands, energy/width of up to 50 spectral lines, galaxy angular size, bulge

  9. Tool Support for Incremental Failure Mode and Effects Analysis of Component-Based Systems

    E-Print Network [OSTI]

    ¨oping, Sweden {jonel, simin}@ida.liu.se Abstract Failure Mode and Effects Analysis (FMEA) is a well- known technique widely used for safety assessment in the area of safety-critical systems. However, FMEA is tradi systems. Also, small modifications in the design may result in a complete revision of the initial FMEA

  10. Petrofacies analysis - the petrophysical tool for geologic/engineering reservoir characterization

    SciTech Connect (OSTI)

    Watney, W.L.; Guy, W.J.; Gerlach, P.M. [Kansas Geological Survey, Lawrence, KS (United States)] [and others

    1997-08-01T23:59:59.000Z

    Petrofacies analysis is defined as the characterization and classification of pore types and fluid saturations as revealed by petrophysical measures of a reservoir. The word {open_quotes}petrofacies{close_quotes} makes an explicit link between petroleum engineers concerns with pore characteristics as arbiters of production performance, and the facies paradigm of geologists as a methodology for genetic understanding and prediction. In petrofacies analysis, the porosity and resistivity axes of the classical Pickett plot are used to map water saturation, bulk volume water, and estimated permeability, as well as capillary pressure information, where it is available. When data points are connected in order of depth within a reservoir, the characteristic patterns reflect reservoir rock character and its interplay with the hydrocarbon column. A third variable can be presented at each point on the crossplot by assigning a color scale that is based on other well logs, often gamma ray or photoelectric effect, or other derived variables. Contrasts between reservoir pore types and fluid saturations will be reflected in changing patterns on the crossplot and can help discriminate and characterize reservoir heterogeneity. Many hundreds of analyses of well logs facilitated by spreadsheet and object-oriented programming have provided the means to distinguish patterns typical of certain complex pore types for sandstones and carbonate reservoirs, occurrences of irreducible water saturation, and presence of transition zones. The result has been an improved means to evaluate potential production such as bypassed pay behind pipe and in old exploration holes, or to assess zonation and continuity of the reservoir. Petrofacies analysis is applied in this example to distinguishing flow units including discrimination of pore type as assessment of reservoir conformance and continuity. The analysis is facilitated through the use of color cross sections and cluster analysis.

  11. DanteR: an extensible R-based tool for quantitative analysis of -omics data

    SciTech Connect (OSTI)

    Taverner, Thomas; Karpievitch, Yuliya; Polpitiya, Ashoka D.; Brown, Joseph N.; Dabney, Alan R.; Anderson, Gordon A.; Smith, Richard D.

    2012-09-15T23:59:59.000Z

    Motivation: The size and complex nature of LC-MS proteomics data sets motivates development of specialized software for statistical data analysis and exploration. We present DanteR, a graphical R package that features extensive statistical and diagnostic functions for quantitative proteomics data analysis, including normalization, imputation, hypothesis testing, interactive visualization and peptide-to-protein rollup. More importantly, users can easily extend the existing functionality by including their own algorithms under the Add-On tab. Availability: DanteR and its associated user guide are available for download at http://omics.pnl.gov/software/. For Windows, a single click automatically installs DanteR along with the R programming environment. For Linux and Mac OS X, users must first install R and then follow instructions on the DanteR web site for package installation.

  12. A Virtual Observatory Census to Address Dwarfs Origins. AVOCADO - I. Science goals, sample selection and analysis tools

    E-Print Network [OSTI]

    Sánchez-Janssen, R; García-Vargas, M; Gomes, J M; Huertas-Company, M; Jiménez-Esteban, F; Mollá, M; Papaderos, P; Pérez-Montero, E; Rodrigo, C; Almeida, J Sánchez; Solano, E

    2013-01-01T23:59:59.000Z

    (Abridged) AVOCADO aims at establishing firm conclusions on the formation and evolution of dwarf galaxies by constructing and analysing a homogeneous, multiwavelength dataset for a statistically significant sample of approximately 6500 nearby dwarfs (M_i > -18 mag). We present the sample selection criteria and describe the suite of analysis tools, some of them developed in the framework of the Virtual Observatory. We make use of optical spectra and UV-to-NIR imaging of the dwarf sample to derive SFRs, stellar masses, ages and metallicities - which are further supplemented with structural parameters that are used to classify them morphologically. This dataset, coupled with a detailed characterisation of each dwarf's environment, allows for a fully comprehensive investigation of their origins and to track the potential evolutionary paths between the different dwarf types. We characterise the local environment of all dwarfs in our sample, paying special attention to trends with current star formation activity. W...

  13. DESIGN AND ANALYSIS OF THE SNS CCL HOT MODEL WATER COOLING SYSTEM USING THE SINDA/FLUINT NETWORK MODELING TOOL

    SciTech Connect (OSTI)

    C. AMMERMAN; J. BERNARDIN

    1999-11-01T23:59:59.000Z

    This report presents results for design and analysis of the hot model water cooling system for the Spallation Neutron Source (SNS) coupled-cavity linac (CCL). The hot model, when completed, will include segments for both the CCL and coupled-cavity drift-tube linac (CCDTL). The scope of this report encompasses the modeling effort for the CCL portion of the hot model. This modeling effort employed the SINDA/FLUINT network modeling tool. This report begins with an introduction of the SNS hot model and network modeling using SINDA/FLUINT. Next, the development and operation of the SINDA/FLUINT model are discussed. Finally, the results of the SINDA/FLUINT modeling effort are presented and discussed.

  14. Bayes-X: a Bayesian inference tool for the analysis of X-ray observations of galaxy clusters

    E-Print Network [OSTI]

    Olamaie, M; Grainge, K J B; Hobson, M P; Sanders, J S; Saunders, R D E

    2013-01-01T23:59:59.000Z

    We present the first public release of our Bayesian inference tool for the analysis of X-ray observations of galaxy clusters, called Bayes-X. We illustrate the approach of Bayes-X by using it to analyse a set of four simulated clusters at z=0.2-0.9 in the X-ray band as they would be observed by a Chandra-like X-ray observatory. In both the simulations and the analysis pipeline we assume that the dark matter density follows a spherically-symmetric Navarro, Frenk and White (NFW) profile and that the gas pressure is described by a generalised NFW (GNFW) profile. We then perform four sets of analyses. These include prior-only analyses and analyses in which we adopt wide uniform prior probability distributions on f_g(r_{200}) and on the model parameters describing the shape and slopes of the GNFW pressure profile, namely (c_{500}, a, b, c). By numerically exploring the joint probability distribution of the cluster parameters given simulated Chandra-like data, we show that the model and analysis technique can robus...

  15. A quantitative quantum-chemical analysis tool for the distribution of mechanical force in molecules

    SciTech Connect (OSTI)

    Stauch, Tim; Dreuw, Andreas, E-mail: dreuw@uni-heidelberg.de [Interdisciplinary Center for Scientific Computing, University of Heidelberg, Im Neuenheimer Feld 368, 69120 Heidelberg (Germany)] [Interdisciplinary Center for Scientific Computing, University of Heidelberg, Im Neuenheimer Feld 368, 69120 Heidelberg (Germany)

    2014-04-07T23:59:59.000Z

    The promising field of mechanochemistry suffers from a general lack of understanding of the distribution and propagation of force in a stretched molecule, which limits its applicability up to the present day. In this article, we introduce the JEDI (Judgement of Energy DIstribution) analysis, which is the first quantum chemical method that provides a quantitative understanding of the distribution of mechanical stress energy among all degrees of freedom in a molecule. The method is carried out on the basis of static or dynamic calculations under the influence of an external force and makes use of a Hessian matrix in redundant internal coordinates (bond lengths, bond angles, and dihedral angles), so that all relevant degrees of freedom of a molecule are included and mechanochemical processes can be interpreted in a chemically intuitive way. The JEDI method is characterized by its modest computational effort, with the calculation of the Hessian being the rate-determining step, and delivers, except for the harmonic approximation, exact ab initio results. We apply the JEDI analysis to several example molecules in both static quantum chemical calculations and Born-Oppenheimer Molecular Dynamics simulations in which molecules are subject to an external force, thus studying not only the distribution and the propagation of strain in mechanically deformed systems, but also gaining valuable insights into the mechanochemically induced isomerization of trans-3,4-dimethylcyclobutene to trans,trans-2,4-hexadiene. The JEDI analysis can potentially be used in the discussion of sonochemical reactions, molecular motors, mechanophores, and photoswitches as well as in the development of molecular force probes.

  16. The Artificial Neural Networks as a tool for analysis of the individual Extensive Air Showers data

    E-Print Network [OSTI]

    Tadeusz Wibig

    1996-08-03T23:59:59.000Z

    In that paper we discuss possibilities of using the Artificial Neural Network technic for the individual Extensive Air Showers data evaluation. It is shown that the recently developed new computational methods can be used in studies of EAS registered by very large and complex detector systems. The ANN can be used to classify showers due to e.g. primary particle mass as well as to find a particular EAS parameter like e.g. total muon number. The examples of both kinds of analysis are given and discussed.

  17. Enhanced Chemical Incident Response Plan (ECIRP). Appendix F, remediation analysis with Decision Support Tools (DSTs) for wide-area chemical hazards.

    SciTech Connect (OSTI)

    Hassig, Nancy L. (Pacific Northwest National Laboratory, Richland, WA); Pulsipher, Brent A. (Pacific Northwest National Laboratory, Richland, WA); Foltz, Greg W.; Hoette, Trisha Marie

    2011-07-01T23:59:59.000Z

    The Defense Threat Reduction Agency (DTRA) commissioned an assessment of the Consequence Management (CM) plans in place on military bases for response to a chemical attack. The effectiveness of the CM plans for recovering from chemical incidents was modeled using a multiple Decision Support Tools (DSTs). First, a scenario was developed based on an aerial dispersion of a chemical agent over a wide-area of land. The extent of contamination was modeled with the Hazard Prediction and Assessment Capability (HPAC) tool. Subsequently, the Analyzer for Wide Area Restoration Effectiveness (AWARE) tool was used to estimate the cost and time demands for remediation based on input of contamination maps, sampling and decontamination resources, strategies, rates and costs. The sampling strategies incorporated in the calculation were designed using the Visual Sample Plan (VSP) tool. Based on a gaps assessment and the DST remediation analysis, an Enhanced Chemical Incident Response Plan (ECIRP) was developed.

  18. Assessment of HTGR Helium Compressor Analysis Tool Based on Newton-Raphson Numerical Application to Through-flow Analysis

    SciTech Connect (OSTI)

    Ji Hwan Kim; Hyeun Min Kim; Hee Cheon NO [Korea Advanced Institute of Science and Technology, 335 Gwahangno - 373-1 Guseong-dong, Yuseong-gu, Daejeon 305-701 (Korea, Republic of)

    2006-07-01T23:59:59.000Z

    This study describes the development of a computer program for analyzing the off-design performance of axial flow helium compressors, which is one of the major concerns for the power conversion system of a high temperature gas-cooled reactor (HTGR). The compressor performance has been predicted by the aerodynamic analysis of meridional flow with allowances for losses. The governing equations have been derived from Euler turbomachine equation and the streamline curvature method, and then they have been merged into linearized equations based on the Newton-Raphson numerical method. The effect of viscosity is considered by empirical correlations to introduce entropy rises caused by primary loss sources. Use of the method has been illustrated by applying it to a 20-stage helium compressor of the GTHTR300 plant. As a result, the flow throughout the stages of the compressor has been predicted and the compressor characteristics have been also investigated according to the design specification. The program results show much better stability and good convergence with respect to other through-flow methods, and good agreement with the compressor performance map provided by JAEA. (authors)

  19. ICSE Workshop on Green and Sustainable Software Engineering, Zurich, Switzerland, 3rd June 2012 An Energy Consumption Model and Analysis Tool for Cloud Computing

    E-Print Network [OSTI]

    Schneider, Jean-Guy

    system-level optimisation. Keywords-green computing; Cloud computing; energy consumption; performanceIn 1st ICSE Workshop on Green and Sustainable Software Engineering, Zurich, Switzerland, 3rd June 2012 An Energy Consumption Model and Analysis Tool for Cloud Computing Environments FeiFei Chen, Jean

  20. A research tool for long-term and continuous analysis of fish assemblage in coral-reefs using underwater camera footage

    E-Print Network [OSTI]

    Fisher, Bob

    A research tool for long-term and continuous analysis of fish assemblage in coral-reefs using a better understanding of a complex environment such as a coral reef, collecting data for long-term monitoring of these environments is essential. Long-term monitoring of a coral reef environment can however

  1. A Method and Tool Support for Model-based Semi-automated Failure Modes and Effects Analysis of Engineering Designs

    E-Print Network [OSTI]

    Papadopoulos, Yiannis

    and scalability of present algorithms seem to have so far limited the industrial uptake of existing automated FMEA technology. In this paper, we describe a new tool for the automatic synthesis of FMEAs which builds upon our earlier work on fault tree synthesis. The tool constructs FMEAs from engineering diagrams (e.g. developed

  2. Percussion tool

    DOE Patents [OSTI]

    Reed, Teddy R.

    2006-11-28T23:59:59.000Z

    A percussion tool is described and which includes a housing mounting a tool bit; a reciprocally moveable hammer borne by the housing and which is operable to repeatedly strike the tool bit; and a reciprocally moveable piston enclosed within the hammer and which imparts reciprocal movement to the reciprocally moveable hammer.

  3. OOTW Force Design Tools

    SciTech Connect (OSTI)

    Bell, R.E.; Hartley, D.S.III; Packard, S.L.

    1999-05-01T23:59:59.000Z

    This report documents refined requirements for tools to aid the process of force design in Operations Other Than War (OOTWs). It recommends actions for the creation of one tool and work on other tools relating to mission planning. It also identifies the governmental agencies and commands with interests in each tool, from whom should come the user advisory groups overseeing the respective tool development activities. The understanding of OOTWs and their analytical support requirements has matured to the point where action can be taken in three areas: force design, collaborative analysis, and impact analysis. While the nature of the action and the length of time before complete results can be expected depends on the area, in each case the action should begin immediately. Force design for OOTWs is not a technically difficult process. Like force design for combat operations, it is a process of matching the capabilities of forces against the specified and implied tasks of the operation, considering the constraints of logistics, transport and force availabilities. However, there is a critical difference that restricts the usefulness of combat force design tools for OOTWs: the combat tools are built to infer non-combat capability requirements from combat capability requirements and cannot reverse the direction of the inference, as is required for OOTWs. Recently, OOTWs have played a larger role in force assessment, system effectiveness and tradeoff analysis, and concept and doctrine development and analysis. In the first Quadrennial Defense Review (QDR), each of the Services created its own OOTW force design tool. Unfortunately, the tools address different parts of the problem and do not coordinate the use of competing capabilities. These tools satisfied the immediate requirements of the QDR, but do not provide a long-term cost-effective solution.

  4. Models and analysis of yeast mating response : tools for model building, from documentation to time-dependent stimulation

    E-Print Network [OSTI]

    Thomson, Ty M. (Ty Matthew)

    2008-01-01T23:59:59.000Z

    Molecular signaling systems allow cells to sense and respond to environmental stimuli. Quantitative modeling can be a valuable tool for evaluating and extending our understanding of signaling systems. In particular, studies ...

  5. Uniting software tools for the archival, management and analysis of linguistic data: lessons from developing the Language Data Repository

    E-Print Network [OSTI]

    Audenaert, Michael Neal

    2013-02-22T23:59:59.000Z

    and data management, discuss some of the current projects and tools in each of these areas, and present a summary of work currently being conducted by the Open Language Archive Community to support open web based access to the resources available...

  6. The CORAS Tool for Security Risk Analysis Fredrik Vraalsen, Folker den Braber, Mass Soldal Lund, and Ketil Stlen

    E-Print Network [OSTI]

    Stølen, Ketil

    integrates aspects from partly complementary risk analysis techniques, like HazOp [1], FMEA [2], and FTA [3

  7. Supporting visual integration and analysis of geospatially-referenced data through web-deployable, cross-platform tools

    E-Print Network [OSTI]

    Supporting visual integration and analysis of geospatially-referenced data through web-analytical methods that can support agency missions by enabling integrated analysis of geospatial data from within and analysis goals, and provide examples of the kinds of multivariate geospatial data in- tegration

  8. GRAFLAB 2.3 for UNIX - A MATLAB database, plotting, and analysis tool: User`s guide

    SciTech Connect (OSTI)

    Dunn, W.N.

    1998-03-01T23:59:59.000Z

    This report is a user`s manual for GRAFLAB, which is a new database, analysis, and plotting package that has been written entirely in the MATLAB programming language. GRAFLAB is currently used for data reduction, analysis, and archival. GRAFLAB was written to replace GRAFAID, which is a FORTRAN database, analysis, and plotting package that runs on VAX/VMS.

  9. Queer Tools

    E-Print Network [OSTI]

    Hacker, Randi; Tsutsui, William

    2007-11-19T23:59:59.000Z

    Broadcast Transcript: Chindogu. Did someone say "Bless you?" No need. This is a Japanese word that means "queer tools" and it was coined to describe the Japanese penchant for unusual inventions. From toilet paper rolls that attach to the head...

  10. Workflow Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    at NERSC go here. Galaxy - Galaxy is a web based workflow tool that is use by the genomics community. It allows you to define job dependencies via a web based workflow engine....

  11. Tools | JCESR

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Tools JCESR Logos Logos are available for download in jpg format. To view the full-size logo file, click the description under the version of the logo you are interested in. When...

  12. Microstructural study and densification analysis of hot work tool steel matrix composites reinforced with TiB{sub 2} particles

    SciTech Connect (OSTI)

    Fedrizzi, A., E-mail: anna.fedrizzi@ing.unitn.it [Department of Industrial Engineering, University of Trento, Via Mesiano 77, 38123 Trento (Italy); Pellizzari, M. [Department of Industrial Engineering, University of Trento, Via Mesiano 77, 38123 Trento (Italy); Zadra, M. [K4Sint, Start-up of the University of Trento, Viale Dante 300, 38057 Pergine Valsugana (Italy); Marin, E. [Department of Chemistry, Physics and Environment, University of Udine, Via Cotonificio 108, 33100 Udine (Italy)

    2013-12-15T23:59:59.000Z

    Hot work tool steels are characterized by good toughness and high hot hardness but are less wear resistant than other tooling materials, such as high speed steel. Metal matrix composites show improved tribological behavior, but not much work has been done in the field of hot work tool steels. In this paper TiB{sub 2}-reinforced hot work tool steel matrix composites were produced by spark plasma sintering (SPS). Mechanical alloying (MA) was proposed as a suited process to improve the composite microstructure. Density measurements and microstructure confirmed that MA promotes sintering and produces a fine and homogeneous dispersion of reinforcing particles. X-ray diffraction patterns of the sintered composites highlighted the formation of equilibrium Fe{sub 2}B and TiC, as predicted by thermodynamic calculations using Thermo-Calc® software. Scanning electron microscopy as well as scanning Kelvin probe force microscopy highlighted the reaction of the steel matrix with TiB{sub 2} particles, showing the formation of a reaction layer at the TiB{sub 2}-steel interface. Phase investigations pointed out that TiB{sub 2} is not chemically stable in steel matrix because of the presence of carbon even during short time SPS. - Highlights: • TiB{sub 2} reinforced steel matrix composites were produced by spark plasma sintering. • TiB{sub 2} was successfully dispersed in the steel matrix by mechanical alloying. • Steel and TiB{sub 2} react during sintering forming equilibrium Fe{sub 2}B and TiC. • The new phases were investigated by means of AFM, Volta potential and XRD analyses.

  13. A Multi-layer, Data-driven Advanced Reasoning Tool for Intelligent Data Mining and Analysis for Smart Grids

    SciTech Connect (OSTI)

    Lu, Ning; Du, Pengwei; Greitzer, Frank L.; Guo, Xinxin; Hohimer, Ryan E.; Pomiak, Yekaterina G.

    2012-12-31T23:59:59.000Z

    This paper presents the multi-layer, data-driven advanced reasoning tool (M-DART), a proof-of-principle decision support tool for improved power system operation. M-DART will cross-correlate and examine different data sources to assess anomalies, infer root causes, and anneal data into actionable information. By performing higher-level reasoning “triage” of diverse data sources, M-DART focuses on early detection of emerging power system events and identifies highest priority actions for the human decision maker. M-DART represents a significant advancement over today’s grid monitoring technologies that apply offline analyses to derive model-based guidelines for online real-time operations and use isolated data processing mechanisms focusing on individual data domains. The development of the M-DART will bridge these gaps by reasoning about results obtained from multiple data sources that are enabled by the smart grid infrastructure. This hybrid approach integrates a knowledge base that is trained offline but tuned online to capture model-based relationships while revealing complex causal relationships among data from different domains.

  14. WAVELET ANALYSIS AS A TOOL TO LOCALIZE MAGNETIC AND CROSS-HELICITY EVENTS IN THE SOLAR WIND

    SciTech Connect (OSTI)

    Telloni, D. [National Institute for Astrophysics, Astronomical Observatory of Torino, Via Osservatorio 20, 10025 Pino Torinese (Italy); Bruno, R.; D'Amicis, R. [National Institute for Astrophysics, Institute for Interplanetary Space Physics, Via del Fosso del Cavaliere 100, 00133 Roma (Italy); Pietropaolo, E. [Department of Physics, University of L'Aquila, Via Vetoio Localita Coppito, 67100 L'Aquila (Italy); Carbone, V. [Department of Physics, University of Calabria, Via Ponte P. Bucci Cubo 31/C, 87036 Rende (Italy)

    2012-05-20T23:59:59.000Z

    In this paper, we adopt the use of the wavelet transform as a new tool to investigate the time behavior at different scales of reduced magnetic helicity, cross-helicity, and residual energy in space plasmas. The main goal is a better characterization of the fluctuations in which interplanetary flux ropes are embedded. This kind of information is still missing in the present literature, and our tool can represent the basis for a new treatment of in situ measurements of this kind of event. There is a debate about the origins of small-scale flux ropes. It has been suggested that they are formed through magnetic reconnection in the solar wind, such as across the heliospheric current sheet. On the other hand, it has also been suggested that they are formed in the corona, similar to magnetic clouds. Thus, it looks like that there are two populations, one originating in the solar wind via magnetic reconnection across the current sheet in the inner heliosphere and the other originating in the corona. Small-scale flux ropes might be the remnants of the streamer belt blobs formed from disconnection; however, a one-to-one observation of a blob and a small-scale flux rope in the solar wind has yet to be found. Within this panorama of possibilities, this new technique appears to be very promising in investigating the origins of these objects advected by the solar wind.

  15. Workflow Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of ScienceandMesa del SolStrengtheningWildfires may contribute more to &83 3.3 Table3WorkToolsTools

  16. Spatially explicit load enrichment calculation tool and cluster analysis for identification of E. coli sources in Plum Creek Watershed, Texas

    E-Print Network [OSTI]

    Teague, Aarin Elizabeth

    2009-06-02T23:59:59.000Z

    . Another method to identify the source of E. coli contamination is load duration curve (LDC) analysis. Load duration curves are used to characterize water quality concerns and to describe patterns associated with the impairment (Cleland, 2003). Load...

  17. Flammable Gas Refined Safety Analysis Tool Software Verification and Validation Report for Resolve Version 2.5

    SciTech Connect (OSTI)

    BRATZEL, D.R.

    2000-09-28T23:59:59.000Z

    The purpose of this report is to document all software verification and validation activities, results, and findings related to the development of Resolve Version 2.5 for the analysis of flammable gas accidents in Hanford Site waste tanks.

  18. An analysis of winter precipitation in the northeast and a winter weather precipitation type forecasting tool for New York City 

    E-Print Network [OSTI]

    Gordon, Christopher James

    1999-01-01T23:59:59.000Z

    1's accuracy in forecasting frozen precipitation. . . . 60 23 25 Same as FIG. 22 except for model 2 . . . . Same as FIG. 22 except for model 3 . . . . Same as FIG. 22 except for model 4 . . . . 61 62 26 Histogram of responses for snow cases... to the logistic regression analysis of snow cases versus rain cases for model 1. 64 FIGURE Page 27 Histogram of responses for rain cases to the logistic regression analysis of snow cases versus rain cases for model 1 28 Histogram of responses for snow cases...

  19. daVinci Code: A Multi-Model Simulation and Analysis Tool for Multi-Body Systems

    E-Print Network [OSTI]

    Trinkle, Jeff

    , analysis, and virtual design of multibody systems with intermittent unilateral con- tacts with dry friction soft- ware for simulating multibody systems with unilateral con- tacts and dry friction (DADs, Adams of simulat- ing planar systems of bodies experiencing unilateral contacts with friction. Since different

  20. Visual Analysis as a Design and Decision-Making Tool in the Development of a Quarry1

    E-Print Network [OSTI]

    Standiford, Richard B.

    and reclamation plans and (2) analyzing the off-site visual impacts on the surrounding land and community. VISUAL of the mining and reclamation of a proposed hard rock quarry was required. High visibility of the proposed of the project. The Visual Analysis defined design criteria for the min- ing and reclamation plans to minimize

  1. Agricultural Genotyping RAPiD Genomics is a DNA genotyping and genetic data analysis company providing tools for

    E-Print Network [OSTI]

    Jawitz, James W.

    Agricultural Genotyping RAPiD Genomics is a DNA genotyping and genetic data analysis company or animal even before the seed germinates or the animal is born. The system developed by RAPiD Genomics in parallel, at a cost of several hundred dollars per sample. RAPiD Genomics has short- ened this process

  2. Analysis of the Reactor Cavity Cooling System for Very High Temperature Gas-cooled Reactors Using Computational Fluid Dynamics Tools

    E-Print Network [OSTI]

    Frisani, Angelo

    2011-08-08T23:59:59.000Z

    the VHTR performance and safety analysis, one-dimensional (1-D) system type codes, like RELAP5 or MELCOR, and multi-dimensional CFD codes can be used. The choice of 1-D over multi-dimensional codes first involves identifying the main phenomena, and from...

  3. Multi-Dimensional Error Analysis of Nearshore Wave Modeling Tools, with Application Toward Data-Driven Boundary Correction

    E-Print Network [OSTI]

    Jiang, Boyang

    2012-02-14T23:59:59.000Z

    Experiment ........................................................... 6 1.3.2 Nearshore Canyon Experiment (NCEX) ..................................... 8 2. COMPARISON OF FIELD OBSERVATIONS AND MODEL EXPERIMENTS... ................................................................................................ 10 2.1 Model Parameters and Setup ................................................................ 10 2.2 Comparisons of Delft3D Output to Data .............................................. 11 3. ERROR ANALYSIS...

  4. Downhole tool

    DOE Patents [OSTI]

    Hall, David R.; Muradov, Andrei; Pixton, David S.; Dahlgren, Scott Steven; Briscoe, Michael A.

    2007-03-20T23:59:59.000Z

    A double shouldered downhole tool connection comprises box and pin connections having mating threads intermediate mating primary and secondary shoulders. The connection further comprises a secondary shoulder component retained in the box connection intermediate a floating component and the primary shoulders. The secondary shoulder component and the pin connection cooperate to transfer a portion of makeup load to the box connection. The downhole tool may be selected from the group consisting of drill pipe, drill collars, production pipe, and reamers. The floating component may be selected from the group consisting of electronics modules, generators, gyroscopes, power sources, and stators. The secondary shoulder component may comprises an interface to the box connection selected from the group consisting of radial grooves, axial grooves, tapered grooves, radial protrusions, axial protrusions, tapered protrusions, shoulders, and threads.

  5. Innovative and Advanced Coupled Neutron Transport and Thermal Hydraulic Method (Tool) for the Design, Analysis and Optimization of VHTR/NGNP Prismatic Reactors

    SciTech Connect (OSTI)

    Rahnema, Farzad; Garimeela, Srinivas; Ougouag, Abderrafi; Zhang, Dingkang

    2013-11-29T23:59:59.000Z

    This project will develop a 3D, advanced coarse mesh transport method (COMET-Hex) for steady- state and transient analyses in advanced very high-temperature reactors (VHTRs). The project will lead to a coupled neutronics and thermal hydraulic (T/H) core simulation tool with fuel depletion capability. The computational tool will be developed in hexagonal geometry, based solely on transport theory without (spatial) homogenization in complicated 3D geometries. In addition to the hexagonal geometry extension, collaborators will concurrently develop three additional capabilities to increase the code’s versatility as an advanced and robust core simulator for VHTRs. First, the project team will develop and implement a depletion method within the core simulator. Second, the team will develop an elementary (proof-of-concept) 1D time-dependent transport method for efficient transient analyses. The third capability will be a thermal hydraulic method coupled to the neutronics transport module for VHTRs. Current advancements in reactor core design are pushing VHTRs toward greater core and fuel heterogeneity to pursue higher burn-ups, efficiently transmute used fuel, maximize energy production, and improve plant economics and safety. As a result, an accurate and efficient neutron transport, with capabilities to treat heterogeneous burnable poison effects, is highly desirable for predicting VHTR neutronics performance. This research project’s primary objective is to advance the state of the art for reactor analysis.

  6. Tools for Authentication

    SciTech Connect (OSTI)

    White, G

    2008-07-09T23:59:59.000Z

    Many recent Non-proliferation and Arms Control software projects include a software authentication component. In this context, 'authentication' is defined as determining that a software package performs only its intended purpose and performs that purpose correctly and reliably over many years. In addition to visual inspection by knowledgeable computer scientists, automated tools are needed to highlight suspicious code constructs both to aid the visual inspection and to guide program development. While many commercial tools are available for portions of the authentication task, they are proprietary, and have limited extensibility. An open-source, extensible tool can be customized to the unique needs of each project (projects can have both common and custom rules to detect flaws and security holes). Any such extensible tool must be based on a complete language compiler infrastructure, that is, one that can parse and digest the full language through its standard grammar. ROSE is precisely such a compiler infrastructure developed within DOE. ROSE is a robust source-to-source analysis and optimization infrastructure currently addressing large, million-line DOE applications in C, C++, and FORTRAN. This year, it has been extended to support the automated analysis of binaries. We continue to extend ROSE to address a number of security-specific requirements and apply it to software authentication for Non-proliferation and Arms Control projects. We will give an update on the status of our work.

  7. Workflow Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of ScienceandMesa del SolStrengtheningWildfires may contribute more to &83 3.3 Table3WorkTools

  8. Java Vertexing Tools

    SciTech Connect (OSTI)

    Strube, Jan; /Oregon U.; Graf, Norman; /SLAC

    2006-03-03T23:59:59.000Z

    This document describes the implementation of the topological vertex finding algorithm ZVTOP within the org.lcsim reconstruction and analysis framework. At the present date, Java vertexing tools allow users to perform topological vertexing on tracks that have been obtained from a Fast MC simulation. An implementation that will be able to handle fully reconstructed events is being designed from the ground up for longevity and maintainability.

  9. Tool fabrication system for micro/nano milling—function analysis and design of a six-axis Wire EDM machine

    E-Print Network [OSTI]

    Cheng, X.; Wang, Z. G.; Kobayashi, S.; Nakamoto, K.; Yamazaki, K.

    2010-01-01T23:59:59.000Z

    axis Wire EDM machine X. Cheng & Z. G. Wang & S. Kobayashi &Tool fabrication X. Cheng (*) : Z. G. Wang : K. Yamazaki

  10. Efficient Integration of Old and New Research Tools for Automating the Identification and Analysis of Seismic Reference Events

    SciTech Connect (OSTI)

    Wagner, Robert; Rivers, Wilmer

    2005-01-25T23:59:59.000Z

    any single computer program for seismic data analysis will not have all the capabilities needed to study reference events, since hese detailed studies will be highly specialized. It may be necessary to develop and test new algorithms, and then these special ;odes must be integrated with existing software to use their conventional data-processing routines. We have investigated two neans of establishing communications between the legacy and new codes: CORBA and XML/SOAP Web services. We have nvestigated making new Java code communicate with a legacy C-language program, geotool, running under Linux. Both methods vere successful, but both were difficult to implement. C programs on UNIX/Linux are poorly supported for Web services, compared vith the Java and .NET languages and platforms. Easier-to-use middleware will be required for scientists to construct distributed applications as easily as stand-alone ones. Considerable difficulty was encountered in modifying geotool, and this problem shows he need to use component-based user interfaces instead of large C-language codes where changes to one part of the program nay introduce side effects into other parts. We have nevertheless made bug fixes and enhancements to that legacy program, but t remains difficult to expand it through communications with external software.

  11. Geographic Information Systems- Tools For Geotherm Exploration...

    Open Energy Info (EERE)

    Systems- Tools For Geotherm Exploration, Tracers Data Analysis, And Enhanced Data Distribution, Visualization, And Management Jump to: navigation, search OpenEI Reference...

  12. Tools | Department of Energy

    Office of Environmental Management (EM)

    Tools Tools logofemp.png The Federal Energy Management Program (FEMP) offers links to tools that can help agencies reduce energy use and meet federal laws and requirements. Tools...

  13. The second iteration of the Systems Prioritization Method: A systems prioritization and decision-aiding tool for the Waste Isolation Pilot Plant: Volume 3, Analysis for final programmatic recommendations

    SciTech Connect (OSTI)

    Prindle, N.H.; Boak, D.M.; Weiner, R.F. [and others] [and others

    1996-05-01T23:59:59.000Z

    Systems Prioritization Method (SPM) is a decision-aiding tool developed by Sandia National Laboratories for the US DOE Carlsbad Area Office (DOE/CAO). This tool provides an analytical basis for programmatic decision making for the Waste Isolation Pilot Plant (WIPP). SPM integrates decision-analysis techniques, performance,a nd risk-assessment tools, and advanced information technology. Potential outcomes of proposed activities and combination of activities are used to calculate a probability of demonstrating compliance (PDC) with selected regulations. The results are presented in a decision matrix showing cost, duration, and maximum PDC for all activities in a given cost and duration category. This is the third and final volume in the series which presents the analysis for final programmatic recommendations.

  14. Algal functional annotation tool

    SciTech Connect (OSTI)

    Lopez, D. [UCLA; Casero, D. [UCLA; Cokus, S. J. [UCLA; Merchant, S. S. [UCLA; Pellegrini, M. [UCLA

    2012-07-01T23:59:59.000Z

    The Algal Functional Annotation Tool is a web-based comprehensive analysis suite integrating annotation data from several pathway, ontology, and protein family databases. The current version provides annotation for the model alga Chlamydomonas reinhardtii, and in the future will include additional genomes. The site allows users to interpret large gene lists by identifying associated functional terms, and their enrichment. Additionally, expression data for several experimental conditions were compiled and analyzed to provide an expression-based enrichment search. A tool to search for functionally-related genes based on gene expression across these conditions is also provided. Other features include dynamic visualization of genes on KEGG pathway maps and batch gene identifier conversion.

  15. Evaluation of Emerging Diagnostic Tools for Commercial HVAC Systems

    E-Print Network [OSTI]

    Friedman, H.; Piette, M. A.

    2001-01-01T23:59:59.000Z

    six tools in our analysis: Architectural Energy Corporation's ENFORMA? software, Facility Dynamics Engineering's Performance And Continuous Re-commissioning Analysis Tool (PACRAT), Pacific Northwest National Laboratory's Whole Building Diagnostician...

  16. Virtual Crosswalk Analysis Tool (VCAT)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What'sis Taking Over OurThe Iron SpinPrincetonUsing Maps1 - USAFofEmail Mr.VirginiaInformation Technology

  17. Analysis Tools | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: Alternative Fuels DataEnergyDepartment ofATVMAgriculturalAn Earth-Friendly Wind

  18. Global Pathways Analysis Tool (GPAT)

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page onYouTube YouTube Note: Since the.pdf Flash2006-52.pdf0.pdfDepartmentCounselGlass Coating Makes SolarTransformation

  19. Moving from Status to Trends: Forest Inventory and Analysis Symposium 2012 74GTR-NRS-P-105 USING FIESTA, AN R-BASED TOOL FOR ANALYSTS,

    E-Print Network [OSTI]

    Development Core Team 2011). R is a powerful statistical computing and graphical program language a flexible, cross-platform environment for statistical tool development and application through R package FIESTA, AN R-BASED TOOL FOR ANALYSTS, TO LOOK AT TEMPORAL TRENDS IN FOREST ESTIMATES Tracey S. Frescino

  20. TNA Data Collection Tool

    Broader source: Energy.gov [DOE]

    The TNA Data Collection Tool Instructions provides guidance on how to complete the TNA Data Collection Tool. The TNA Data Collection Tool is an Excel spreadsheet that the organization's designating training POC will use to populate their organizations training needs.

  1. The power tool

    SciTech Connect (OSTI)

    HAYFIELD, J.P.

    1999-02-01T23:59:59.000Z

    POWER Tool--Planning, Optimization, Waste Estimating and Resourcing tool, a hand-held field estimating unit and relational database software tool for optimizing disassembly and final waste form of contaminated systems and equipment.

  2. The Tariff Analysis Project: A Database and Analysis Platform...

    Open Energy Info (EERE)

    search Tool Summary LAUNCH TOOL Name: The Tariff Analysis Project: A Database and Analysis Platform for Electricity Tariffs Focus Area: Renewable Energy Topics: Policy...

  3. Screening and Evaluation Tool (SET) Users Guide

    SciTech Connect (OSTI)

    Layne Pincock

    2014-10-01T23:59:59.000Z

    This document is the users guide to using the Screening and Evaluation Tool (SET). SET is a tool for comparing multiple fuel cycle options against a common set of criteria and metrics. It does this using standard multi-attribute utility decision analysis methods.

  4. analytical tool supporting: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    an Analytical Tool for Track Component Response (I-TRACK) Thiago B. do Carmo, J, NV 7 October 2013 12;Slide 2Simplified Analytical Tool and Parametric Analysis Outline ...

  5. Foundational Tools for Petascale Computing

    SciTech Connect (OSTI)

    Miller, Barton

    2014-05-19T23:59:59.000Z

    The Paradyn project has a history of developing algorithms, techniques, and software that push the cutting edge of tool technology for high-end computing systems. Under this funding, we are working on a three-year agenda to make substantial new advances in support of new and emerging Petascale systems. The overall goal for this work is to address the steady increase in complexity of these petascale systems. Our work covers two key areas: (1) The analysis, instrumentation and control of binary programs. Work in this area falls under the general framework of the Dyninst API tool kits. (2) Infrastructure for building tools and applications at extreme scale. Work in this area falls under the general framework of the MRNet scalability framework. Note that work done under this funding is closely related to work done under a contemporaneous grant, “High-Performance Energy Applications and Systems”, SC0004061/FG02-10ER25972, UW PRJ36WV.

  6. DEVELOPMENT OF A SOFTWARE DESIGN TOOL FOR

    Broader source: Energy.gov [DOE]

    This project focuses on the development of a stand-alone software tool for the design and economic analysis of hybrid geothermal heat pump systems for heating-and cooling dominated buildings using solar collectors in both operating modes.

  7. Ootw Tool Requirements in Relation to JWARS

    SciTech Connect (OSTI)

    Hartley III, D.S.; Packard, S.L.

    1998-01-01T23:59:59.000Z

    This document reports the results of the CMke of the Secretary of Defense/Program Analysis & Evaluation (OSD/PA&E) sponsored project to identify how Operations Other Than War (OOTW) tool requirements relate to the Joint Warfare Simulation (JWARS) and, more generally, to joint analytical modeling and simulation (M&S) requirements. It includes recommendations about which OOTW tools (and functionality within tools) should be included in JWARS, which should be managed as joint analytical modeling and simulation (M&S) tools, and which should be left for independent development.

  8. Applications (Grid Tools)

    E-Print Network [OSTI]

    Buyya, Rajkumar

    Grid Fabric Software Grid Applications Core Grid Middleware User-Level Middleware (Grid Tools) !"# $ %& ' ( ) * #& + '& ' , - . / # ) ) 0 # * 1 PDB CDB Grid Fabric Hardware &+ '' + ) , '1 '1 ' % - * # ( Grid Fabric Software Grid Applications Core Grid Middleware User-Level Middleware (Grid Tools) !"# $ %& ' ( ) * #& + '& ' , - . / # ) ) 0

  9. Adjustable cutting tool holder

    SciTech Connect (OSTI)

    Steinhour, William Lee III; West, Drew; Honeycutt, Steve; Frank, Steven; Krishnamurthy, Kallutla

    2000-09-21T23:59:59.000Z

    This patent application describes a device for varying the geometry of a cutting tool for use in machining operations.

  10. 3rd Annual Earth System Grid Federation and 3rd Annual Earth System Grid Federation and Ultrascale Visualization Climate Data Analysis Tools Face-to-Face Meeting Report December 2013

    SciTech Connect (OSTI)

    Williams, Dean N. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2014-02-21T23:59:59.000Z

    The climate and weather data science community gathered December 3–5, 2013, at Lawrence Livermore National Laboratory, in Livermore, California, for the third annual Earth System Grid Federation (ESGF) and Ultra-scale Visualization Climate Data Analysis Tools (UV-CDAT) Face-to-Face (F2F) Meeting, which was hosted by the Department of Energy, National Aeronautics and Space Administration, National Oceanic and Atmospheric Administration, the European Infrastructure for the European Network of Earth System Modelling, and the Australian Department of Education. Both ESGF and UV-CDAT are global collaborations designed to develop a new generation of open-source software infrastructure that provides distributed access and analysis to observed and simulated data from the climate and weather communities. The tools and infrastructure developed under these international multi-agency collaborations are critical to understanding extreme weather conditions and long-term climate change, while the F2F meetings help to build a stronger climate and weather data science community and stronger federated software infrastructure. The 2013 F2F meeting determined requirements for existing and impending national and international community projects; enhancements needed for data distribution, analysis, and visualization infrastructure; and standards and resources needed for better collaborations.

  11. ImpactMiner: A Tool for Change Impact Analysis Bogdan Dit, Michael Wagner, Shasha Wen, Weilin Wang, Mario Linares-Vsquez,

    E-Print Network [OSTI]

    Poshyvanyk, Denys

    , and mining software repositories techniques. ImpactMiner is available from our online appendix http://www.cs.wm.edu/semeru/ImpactMiner/ Categories and Subject Descriptors D.2.7 [Software Engineering]: Distribution, Maintenance, and Enhancement Keywords Change impact analysis, repository mining, subversion, dynamic analysis, information retrieval 1

  12. Abstract--Presented are a methodology and a DFII-based tool for AC-stability analysis of a wide variety of closed-loop

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    variety of closed-loop continuous-time (operational amplifiers and other linear circuits). The methodology loop identification and full- circuit stability analysis, which gives better picture of the circuit use a technique that may be viewed as analogous to time- domain analysis1 of circuit's transfer

  13. Wachs Cutter Tooling Station (4495)

    Broader source: Energy.gov (indexed) [DOE]

    purchase, build and install Wachs cutter tooling. The Wachs Cutter Tooling Station is similar to previously operated facility tooling and will utilize an existing hydraulic unit....

  14. Building America Webinar: BEopt Optimization Tool and National...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Optimization Tool (BEopt) Training DOE Zero Energy Ready Home Webinar: Building Energy Optimization (BEopt) Software Analysis: Targeting Zero Net Energy - 2014 BTO Peer Review...

  15. Development of Design and Simulation Tool for Hybrid Geothermal...

    Broader source: Energy.gov (indexed) [DOE]

    * Estimated funding for FY10 is 225,000 - Barriers * Lack of sufficient design and energy analysis tool for hybrid ground source heat pump (HGSHP) systems - Partners * James...

  16. Tips and Tricks for Using the 3D Interpolation Tool

    E-Print Network [OSTI]

    Wright, Dawn Jeannine

    Tips and Tricks for Using the 3D Interpolation Tool This document describes how to download the 3D interpolation tool and use it for the purpose of performing multidimensional analysis on Marine, Atmospheric, Petroleum, Geological, and Groundwater point data. The 3D interpolation tool leverages new methods to solve

  17. Machine tool locator

    DOE Patents [OSTI]

    Hanlon, John A. (Los Alamos, NM); Gill, Timothy J. (Stanley, NM)

    2001-01-01T23:59:59.000Z

    Machine tools can be accurately measured and positioned on manufacturing machines within very small tolerances by use of an autocollimator on a 3-axis mount on a manufacturing machine and positioned so as to focus on a reference tooling ball or a machine tool, a digital camera connected to the viewing end of the autocollimator, and a marker and measure generator for receiving digital images from the camera, then displaying or measuring distances between the projection reticle and the reference reticle on the monitoring screen, and relating the distances to the actual position of the autocollimator relative to the reference tooling ball. The images and measurements are used to set the position of the machine tool and to measure the size and shape of the machine tool tip, and examine cutting edge wear. patent

  18. Certification Status Search Tool

    E-Print Network [OSTI]

    Certification Status Search Tool (SB/DVBE) Illustrated User Manual #12;2 Certification Status Search Tool (SB/DVBE) Rev. 5/14/09 Copyright © 2008 RFP Depot, LLC dba BidSync All Rights Reserved://www.bidsync.com #12;3 Certification Status Search Tool (SB/DVBE) Rev. 5/14/09 Introduction BidSync is a powerful e

  19. Wireline logging tool catalog

    SciTech Connect (OSTI)

    Verdier, M.

    1986-01-01T23:59:59.000Z

    This book provides discussions on wireline logging tools. The contents are resistivity, radioactivity, acoustic, formation dip and borehold geometry, formation sampling, and auxiliary services.

  20. STEP Utility Bill Analysis Report

    Broader source: Energy.gov [DOE]

    STEP Utility Bill Analysis Report, from the Tool Kit Framework: Small Town University Energy Program (STEP).

  1. EISA 432 Energy Audits Best Practices: Software Tools

    SciTech Connect (OSTI)

    Maryl Fisher

    2014-11-01T23:59:59.000Z

    Five whole building analysis software tools that can aid an energy manager with fulfilling energy audit and commissioning/retro-commissioning requirements were selected for review in this best practices study. A description of each software tool is provided as well as a discussion of the user interface and level of expertise required for each tool, a review of how to use the tool for analyzing energy conservation opportunities, the format and content of reports generated by the tool, and a discussion on the applicability of the tool for commissioning.

  2. Assessment of the effectiveness of the advanced programmatic risk analysis and management model (apram) as a decision support tool for construction projects

    E-Print Network [OSTI]

    Imbeah, William Kweku Ansah

    2007-09-17T23:59:59.000Z

    to determine the best construction system that can minimize the expected cost of failure. A risk analysis performed using a more standard approach yielded an expected cost of failure that is almost eight times the expected cost of failure yielded by APRAM...

  3. Transmission genetics of pancreatic acinar atrophy in the German Shepherd Dog and development of microsatellite DNA-based tools for canine forensics and linkage analysis

    E-Print Network [OSTI]

    Clark, Leigh Anne

    2004-09-30T23:59:59.000Z

    potential to identify the marker(s) that segregate with canine hereditary diseases for which no reasonable candidate genes exist. The Minimal Screening Set-1 (MSS-1) was the first set of microsatellite markers described for linkage analysis in the dog...

  4. Fluid sampling tool

    DOE Patents [OSTI]

    Johnston, Roger G. (Los Alamos, NM); Garcia, Anthony R. E. (Espanola, NM); Martinez, Ronald K. (Santa Cruz, NM)

    2001-09-25T23:59:59.000Z

    The invention includes a rotatable tool for collecting fluid through the wall of a container. The tool includes a fluid collection section with a cylindrical shank having an end portion for drilling a hole in the container wall when the tool is rotated, and a threaded portion for tapping the hole in the container wall. A passageway in the shank in communication with at least one radial inlet hole in the drilling end and an opening at the end of the shank is adapted to receive fluid from the container. The tool also includes a cylindrical chamber affixed to the end of the shank opposite to the drilling portion thereof for receiving and storing fluid passing through the passageway. The tool also includes a flexible, deformable gasket that provides a fluid-tight chamber to confine kerf generated during the drilling and tapping of the hole. The invention also includes a fluid extractor section for extracting fluid samples from the fluid collecting section.

  5. Global Solar Opportunity Tool: A Tool for Policy Makers and Energy...

    Open Energy Info (EERE)

    Global Solar Opportunity Tool: A Tool for Policy Makers and Energy Analysts Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Global Solar Opportunity Tool: A Tool for...

  6. An Integrated Suite of Tools to support Human Factors Engineering

    SciTech Connect (OSTI)

    Jacques V Hugo

    2001-08-01T23:59:59.000Z

    Human Factors Engineering (HFE) work for the nuclear industry imposes special demands on the practitioner in terms of the scope, complexity and safety requirements for humans in nuclear installations. Unfortunately HFE lags behind other engineering disciplines in the development and use of modern, powerful tools for the full range of analysis and design processes. HFE does not appear to be an attractive market for software and hardware developers and as a result, HFE practitioners usually have to rely on inefficient general-purpose tools like standard office software, or they have to use expensive special-purpose tools that offer only part of the solution they require and which also do not easily integrate with other tools. There have been attempts to develop generic software tools to support the HFE analyst and also to achieve some order and consistency in format and presentation. However, in spite of many years of development, very few tools have emerged that have achieved these goals. This would suggest the need for special tools, but existing commercial products have been found inadequate and to date not a single tool has been developed that adequately supports the special requirements of HFE work for the nuclear industry. This paper describes an integrated suite of generic as well as purpose-built tools that facilitate information solicitation, issues tracking, work domain analysis, functional requirements analysis, function allocation, operational sequence analysis, task analysis and development of HSI design requirements. In combination, this suite of tools supports the analytical as well as the representational aspects of key HFE activities primarily for new NPPs, including capturing information from subject matter experts and various source documents directly into the appropriate tool and then linking, analyzing and extending that information further to represent detailed functional and task information, and ultimately HSI design requirements. The paper also describes a tool developed especially for functional requirements analysis, function allocation, and task analysis.

  7. Minds, Brains and Tools 

    E-Print Network [OSTI]

    Clark, Andy

    2002-01-01T23:59:59.000Z

    The selected texts for this discussion were two recent pieces by Dennett (“Things About Things” and “Making Tools for Thinking” – henceforth TAT and MTT respectively) and one oldie-but-goodie (“Styles of Mental Representation”, ...

  8. Friction stir welding tool

    DOE Patents [OSTI]

    Tolle, Charles R. (Idaho Falls, ID); Clark, Denis E. (Idaho Falls, ID); Barnes, Timothy A. (Ammon, ID)

    2008-04-15T23:59:59.000Z

    A friction stir welding tool is described and which includes a shank portion; a shoulder portion which is releasably engageable with the shank portion; and a pin which is releasably engageable with the shoulder portion.

  9. Sandia Modeling Tool Webinar

    Broader source: Energy.gov [DOE]

    Hosted by the Energy Department and Western Area Power Administration, this webinar will show attendees about what collaborative, stakeholder-driven modeling is and how the modeling tools and process developed by Sandia can be used in Indian Country.

  10. UNIX Public Tools

    Broader source: Energy.gov [DOE]

    SATAN, the System Administrator Tool for Analyzing Networks, is a network security analyzer designed by Dan Farmer and Wietse Venema. SATAN scans systems connected to the network noting the...

  11. Smart tool holder

    DOE Patents [OSTI]

    Day, Robert Dean (Los Alamos, NM); Foreman, Larry R. (Los Alamos, NM); Hatch, Douglas J. (Los Alamos, NM); Meadows, Mark S. (Boston, MA)

    1998-01-01T23:59:59.000Z

    There is provided an apparatus for machining surfaces to accuracies within the nanometer range by use of electrical current flow through the contact of the cutting tool with the workpiece as a feedback signal to control depth of cut.

  12. PPA Tools and Update

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    PPA Tools & Update Chandra Shah chandra.shah@nel.gov October 21, 2010 2 | FEDERAL ENERGY MANAGEMENT PROGRAM femp.energy.gov * PPA (15 minutes) - Resources - Discussion * URESC (15...

  13. Program Development Tools and Infrastructures

    SciTech Connect (OSTI)

    Schulz, M

    2012-03-12T23:59:59.000Z

    Exascale class machines will exhibit a new level of complexity: they will feature an unprecedented number of cores and threads, will most likely be heterogeneous and deeply hierarchical, and offer a range of new hardware techniques (such as speculative threading, transactional memory, programmable prefetching, and programmable accelerators), which all have to be utilized for an application to realize the full potential of the machine. Additionally, users will be faced with less memory per core, fixed total power budgets, and sharply reduced MTBFs. At the same time, it is expected that the complexity of applications will rise sharply for exascale systems, both to implement new science possible at exascale and to exploit the new hardware features necessary to achieve exascale performance. This is particularly true for many of the NNSA codes, which are large and often highly complex integrated simulation codes that push the limits of everything in the system including language features. To overcome these limitations and to enable users to reach exascale performance, users will expect a new generation of tools that address the bottlenecks of exascale machines, that work seamlessly with the (set of) programming models on the target machines, that scale with the machine, that provide automatic analysis capabilities, and that are flexible and modular enough to overcome the complexities and changing demands of the exascale architectures. Further, any tool must be robust enough to handle the complexity of large integrated codes while keeping the user's learning curve low. With the ASC program, in particular the CSSE (Computational Systems and Software Engineering) and CCE (Common Compute Environment) projects, we are working towards a new generation of tools that fulfill these requirements and that provide our users as well as the larger HPC community with the necessary tools, techniques, and methodologies required to make exascale performance a reality.

  14. SUSTAINABLE REMEDIATION SOFTWARE TOOL EXERCISE AND EVALUATION

    SciTech Connect (OSTI)

    Kohn, J.; Nichols, R.; Looney, B.

    2011-05-12T23:59:59.000Z

    The goal of this study was to examine two different software tools designed to account for the environmental impacts of remediation projects. Three case studies from the Savannah River Site (SRS) near Aiken, SC were used to exercise SiteWise (SW) and Sustainable Remediation Tool (SRT) by including both traditional and novel remediation techniques, contaminants, and contaminated media. This study combined retrospective analysis of implemented projects with prospective analysis of options that were not implemented. Input data were derived from engineering plans, project reports, and planning documents with a few factors supplied from calculations based on Life Cycle Assessment (LCA). Conclusions drawn from software output were generally consistent within a tool; both tools identified the same remediation options as the 'best' for a given site. Magnitudes of impacts varied between the two tools, and it was not always possible to identify the source of the disagreement. The tools differed in their quantitative approaches: SRT based impacts on specific contaminants, media, and site geometry and modeled contaminant removal. SW based impacts on processes and equipment instead of chemical modeling. While SW was able to handle greater variety in remediation scenarios, it did not include a measure of the effectiveness of the scenario.

  15. Data Mining Tools Irfan Altas

    E-Print Network [OSTI]

    Turlach, Berwin A.

    Data Mining Tools Irfan Altas School of Information Studies, Charles Sturt University Wagga Wagga discuss several scalable and parallel discovery and predictive data mining tools. They successfully Data mining tools, thin plate splines, BMARS, revolver, regression, smoothing, addi­ tive models

  16. Computational Tools to Accelerate Commercial Development

    SciTech Connect (OSTI)

    Miller, David C.

    2013-01-01T23:59:59.000Z

    The goals of the work reported are: to develop new computational tools and models to enable industry to more rapidly develop and deploy new advanced energy technologies; to demonstrate the capabilities of the CCSI Toolset on non-proprietary case studies; and to deploy the CCSI Toolset to industry. Challenges of simulating carbon capture (and other) processes include: dealing with multiple scales (particle, device, and whole process scales); integration across scales; verification, validation, and uncertainty; and decision support. The tools cover: risk analysis and decision making; validated, high-fidelity CFD; high-resolution filtered sub-models; process design and optimization tools; advanced process control and dynamics; process models; basic data sub-models; and cross-cutting integration tools.

  17. Qualitative and Quantitative Management Tools Used by Financial Officers in Public Research Universities

    E-Print Network [OSTI]

    Trexler, Grant 1961-

    2012-11-16T23:59:59.000Z

    /or hypotheses (Hanacek, 2010). Quantitative tools may include activity based costing, cost-benefit analysis, trend analysis, responsibility centered management, ratio analysis, strengths-weaknesses-opportunities and threats (SWOT) analysis, data mining...

  18. BEAM EMITTANCE MEASUREMENT TOOL FOR CEBAF OPERATIONS

    SciTech Connect (OSTI)

    Chevtsov, Pavel; Tiefenback, Michael

    2008-10-01T23:59:59.000Z

    A new software tool was created at Jefferson Lab to measure the emittance of the CEBAF electron beams. The tool consists of device control and data analysis applications. The device control application handles the work of wire scanners and writes their measurement results as well as the information about accelerator settings during these measurements into wire scanner data files. The data analysis application reads these files and calculates the beam emittance on the basis of a wire scanner data processing model. Both applications are computer platform independent but are mostly used on LINUX PCs recently installed in the accelerator control room. The new tool significantly simplifies beam emittance measurement procedures for accelerator operations and contributes to a very high availability of the CEBAF machine for the nuclear physics program at Jefferson Lab.

  19. 15.13 A Hierarchical Volume Renderer Tool for the Atmospheric Sciences G. Romine*,1

    E-Print Network [OSTI]

    Wilhelmson, Robert

    15.13 A Hierarchical Volume Renderer Tool for the Atmospheric Sciences G. Romine*,1 , D. Porter2 rendering tool in meteorology. While an excellent tool, the interactive surface rendering performance visualization tools for interactive analysis. The Hierarchical Volume Renderer (HVR) is an alternative

  20. Drum lid removal tool

    DOE Patents [OSTI]

    Pella, Bernard M. (Martinez, GA); Smith, Philip D. (North Augusta, SC)

    2010-08-24T23:59:59.000Z

    A tool for removing the lid of a metal drum wherein the lid is clamped over the drum rim without protruding edges, the tool having an elongated handle with a blade carried by an angularly positioned holder affixed to the midsection of the handle, the blade being of selected width to slice between lid lip and the drum rim and, when the blade is so positioned, upward motion of the blade handle will cause the blade to pry the lip from the rim and allow the lid to be removed.

  1. Tools | Department of Energy

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33Frequently AskedEnergyIssuesEnergy SolarRadioactiveI Disposal Sites25, 2015ToolkitTools Tools

  2. Tools | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn'tOriginEducationVideoStrategic|Industrial Sector,DepartmentFebruary 19, 2015TonyTools for theTools

  3. Utility planning tools catalog. Final report

    SciTech Connect (OSTI)

    Diamond, M.

    1985-02-01T23:59:59.000Z

    Planning methods new to the industry can help utilities steer a sound course in today's complex business environment. This catalog offers an overview of 23 innovative techniques drawn from other industries. The tools selected focus on supporting strategic analysis and decision making for utilities.

  4. MICROFLUIDIC: AN INNOVATIVE TOOL FOREFFICIENT CELL SORTING

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    MICROFLUIDIC: AN INNOVATIVE TOOL FOREFFICIENT CELL SORTING Julien Auteberta , Benoit Couderta-louis.viovy@curie.frmailto:. Abstract At first mostly dedicated to molecular analysis, microfluidic systems are rapidly expanding, biological and fluidic environment at the scale of the cells. A number of new concepts based on microfluidics

  5. Using artificial neural network tools to analyze microbial biomarker data

    SciTech Connect (OSTI)

    Brandt, C.C.; Schryver, J.C.; Almeida, J.S.; Pfiffner, S.M.; Palumbo, A.V.

    2004-03-17T23:59:59.000Z

    A major challenge in the successful implementation of bioremediation is understanding the structure of the indigenous microbial community and how this structure is affected by environmental conditions. Culture-independent approaches that use biomolecular markers have become the key to comparative microbial community analysis. However, the analysis of biomarkers from environmental samples typically generates a large number of measurements. The large number and complex nonlinear relationships among these measurements makes conventional linear statistical analysis of the data difficult. New data analysis tools are needed to help understand these data. We adapted artificial neural network (ANN) tools for relating changes in microbial biomarkers to geochemistry. ANNs are nonlinear pattern recognition methods that can learn from experience to improve their performance. We have successfully applied these techniques to the analysis of membrane lipids and nucleic acid biomarker data from both laboratory and field studies. Although ANNs typically outperform linear data analysis techniques, the user must be aware of several considerations and issues to ensure that analysis results are not misleading: (1) Overfitting, especially in small sample size data sets; (2) Model selection; (3) Interpretation of analysis results; and (4) Availability of tools (code). This poster summarizes approaches for addressing each of these issues. The objectives are: (1) Develop new nonlinear data analysis tools for relating microbial biomolecular markers to geochemical conditions; (2) Apply these nonlinear tools to field and laboratory studies relevant to the NABIR Program; and (3) Provide these tools and guidance in their use to other researchers.

  6. Electrically powered hand tool

    DOE Patents [OSTI]

    Myers, Kurt S.; Reed, Teddy R.

    2007-01-16T23:59:59.000Z

    An electrically powered hand tool is described and which includes a three phase electrical motor having a plurality of poles; an electrical motor drive electrically coupled with the three phase electrical motor; and a source of electrical power which is converted to greater than about 208 volts three-phase and which is electrically coupled with the electrical motor drive.

  7. Smart tool holder

    DOE Patents [OSTI]

    Day, R.D.; Foreman, L.R.; Hatch, D.J.; Meadows, M.S.

    1998-09-08T23:59:59.000Z

    There is provided an apparatus for machining surfaces to accuracies within the nanometer range by use of electrical current flow through the contact of the cutting tool with the workpiece as a feedback signal to control depth of cut. 3 figs.

  8. applying performance analysis: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    with the Vampir performance analysis tool suite that examines the application behavior as well as the fundamental. The performance analysis tool suite Vampir is used to gain deeper...

  9. The Practice of Cost Benefit Analysis in the Transport Sector...

    Open Energy Info (EERE)

    Practice of Cost Benefit Analysis in the Transport Sector a Mexican Perspective Jump to: navigation, search Tool Summary LAUNCH TOOL Name: The Practice of Cost Benefit Analysis in...

  10. Using XFRACAS as a PVROM database tool.

    SciTech Connect (OSTI)

    Hamman, Colin Joseph

    2014-04-01T23:59:59.000Z

    ReliaSofts XFRACAS is a tool chosen by Sandia National Laboratories (SNL) for the purpose of collecting and organizing photovoltaic (PV) system field data that is to be used in assessing PV system reliability. It is a Web-based, closed-loop, incident (failure) reporting, analysis, and corrective action system software package designed for the acquisition, management and analysis of quality and reliability data from multiple sources. The ability to export PV system times-to-failure and times-to-suspension for ready analysis by ReliaSofts Weibull++ and RGA was a primary consideration in choosing XFRACAS as a reliability data collection tool.

  11. FACILITATOR TOOL KIT A GUIDE FOR HELPING GROUPS GET RESULTS

    E-Print Network [OSTI]

    Shapiro, Vadim

    : Implementation Plan Template 66 Appendix I: Sample Project Schedule 67 Appendix J: Customer Survey Process 68 Stakeholder Input Tools Focus Groups 25 Web Survey Options 29 7 Data Collection and Analysis Tools Data T APPENDICES Appendix A: BrainWriting 6-3-5 Worksheet 59 Appendix B: Meeting Agenda Template 60 Appendix C

  12. Vehicle Technologies Office: Transportation System Analysis Tools...

    Broader source: Energy.gov (indexed) [DOE]

    fuel technologies. GREET1, the fuel cycle model, allows users to estimate well-to-wheels energy consumption, fossil fuel consumption, greenhouse gas emissions, and criteria air...

  13. Industrial Geospatial Analysis Tool for Energy Evaluation

    E-Print Network [OSTI]

    Alkadi, N.; Starke, M.; Ma, O.; Nimbalkar, S.; Cox, D.; Dowling, K.; Johnson, B.; Khan, S.

    2013-01-01T23:59:59.000Z

    of manufacturing industries based on each type of industries using information from DOE's Industrial Assessment Center database (IAC-DB) and DOE's Energy Information Administration Manufacturing Energy Consumption Survey database (EIA-MECS DB), in addition...

  14. Tools & Strategies for Social Data Analysis

    E-Print Network [OSTI]

    Willett, Wesley Jay

    2012-01-01T23:59:59.000Z

    scores for each comparison and used k-means clustering tothat use k-means. Figure 5.6: In the distributed comparison

  15. Sandia National Laboratories: Hydrogen Financial Analysis Tool

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and the National Renewable Energy Laboratory (NREL) announce the publication of two new Hydrogen Fueling Infrastructure Research and Station Technology (H2FIRST) reports on...

  16. Sustainable value analysis tool for value creation

    E-Print Network [OSTI]

    Yang, Miying; Vladimirova, Doroteya; Rana, Padmakshi; Evans, Steve

    2014-01-01T23:59:59.000Z

    opportunities in the company. For example, the waste of low-grade heat and water was identified to be a major value uncaptured in the MOL, and the value opportunity is that it can be used to produce electricity or drive the compressor, or vaporize the liquid O2... to environment and society. However, the concept of value missed needs further clarity – value currently squandered, wasted or inadequately captured by a current business model. Besides, selling service is intangible, flexible and unpredictable, therefore...

  17. NREL: Energy Analysis - Models and Tools Archive

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC)Integrated CodesTransparency Visit | NationalWebmaster To contactK-12BSM -JEDI

  18. Retrofit Financial Analysis Tool | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn'tOrigin ofEnergy at Waste-to-Energy usingof EnhancedRestructuringNinth

  19. Sandia Energy - Solar Glare Hazard Analysis Tool

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of ScienceandMesa del Sol Home Distribution GridDocumentsInstitute ofSiting andSolar Glare Hazard

  20. NREL: Energy Analysis - Models and Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOnItemResearch > The EnergyCenterDioxide CaptureSee theOilNREL in the

  1. LIGHTEnUp Tool & Analysis Framework

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page onYouTube YouTube Note: Since the.pdfBreaking ofOil & Gas » MethaneJohnsonKristina Pflanz About UsT8LES'About

  2. Built Environment Analysis Tool: April 2013

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office511041clothAdvanced Materials Advanced MaterialsEnergy,Envelope SHAREManufacturingBuildings Buildings

  3. SWERA/Analysis Tools | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to:Ezfeedflag JumpID-f < RAPID‎ |Rippey Jump to:WY) JumpLandSRT Jump to:STIL2FROM THE

  4. Graphical Contingency Analysis Tool - Energy Innovation Portal

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville Power AdministrationField8,Dist.NewofGeothermal Heat Annual Report,Graphene's

  5. Fluid blade disablement tool

    DOE Patents [OSTI]

    Jakaboski, Juan-Carlos (Albuquerque, NM); Hughs, Chance G. (Albuquerque, NM); Todd, Steven N. (Rio Rancho, NM)

    2012-01-10T23:59:59.000Z

    A fluid blade disablement (FBD) tool that forms both a focused fluid projectile that resembles a blade, which can provide precision penetration of a barrier wall, and a broad fluid projectile that functions substantially like a hammer, which can produce general disruption of structures behind the barrier wall. Embodiments of the FBD tool comprise a container capable of holding fluid, an explosive assembly which is positioned within the container and which comprises an explosive holder and explosive, and a means for detonating. The container has a concavity on the side adjacent to the exposed surface of the explosive. The position of the concavity relative to the explosive and its construction of materials with thicknesses that facilitate inversion and/or rupture of the concavity wall enable the formation of a sharp and coherent blade of fluid advancing ahead of the detonation gases.

  6. Pneumatic soil removal tool

    DOE Patents [OSTI]

    Neuhaus, J.E.

    1992-10-13T23:59:59.000Z

    A soil removal tool is provided for removing radioactive soil, rock and other debris from the bottom of an excavation, while permitting the operator to be located outside of a containment for that excavation. The tool includes a fixed jaw, secured to one end of an elongate pipe, which cooperates with a movable jaw pivotably mounted on the pipe. Movement of the movable jaw is controlled by a pneumatic cylinder mounted on the pipe. The actuator rod of the pneumatic cylinder is connected to a collar which is slidably mounted on the pipe and forms part of the pivotable mounting assembly for the movable jaw. Air is supplied to the pneumatic cylinder through a handle connected to the pipe, under the control of an actuator valve mounted on the handle, to provide movement of the movable jaw. 3 figs.

  7. Pneumatic soil removal tool

    DOE Patents [OSTI]

    Neuhaus, John E. (Newport News, VA)

    1992-01-01T23:59:59.000Z

    A soil removal tool is provided for removing radioactive soil, rock and other debris from the bottom of an excavation, while permitting the operator to be located outside of a containment for that excavation. The tool includes a fixed jaw, secured to one end of an elongate pipe, which cooperates with a movable jaw pivotably mounted on the pipe. Movement of the movable jaw is controlled by a pneumatic cylinder mounted on the pipe. The actuator rod of the pneumatic cylinder is connected to a collar which is slidably mounted on the pipe and forms part of the pivotable mounting assembly for the movable jaw. Air is supplied to the pneumatic cylinder through a handle connected to the pipe, under the control of an actuator valve mounted on the handle, to provide movement of the movable jaw.

  8. aisi h13 tool: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    R.; Kerr, C.; Farrukh, C.; Probert, D. 2014-01-01 20 Prediction of Thermal Fatigue in Tooling for Die-casting Copper via Finite Element Analysis CiteSeer Summary: Abstract. Recent...

  9. Development of quantitative tools for assessment of cerebellar dysfunction

    E-Print Network [OSTI]

    Garg, Aditi

    2005-01-01T23:59:59.000Z

    Two tools for the quantitative assessment of cerebellar dysfunction are developed and explored. One is based on a battery of laptop tests desgined for clinical use. Extensive analysis of one of the tests using a speed/accuracy ...

  10. TWO SIMPLE TOOLS FOR DESIGN OF FIXED SHADES

    E-Print Network [OSTI]

    Nawrocki, Dave

    2013-01-01T23:59:59.000Z

    Kammerud Passive Solar Analysis and Design Group LawrencePassive Solar Group at Lawrence Berkeley Laboratory (LBL) is involved in the designPassive Solar Conference, Amherst, MA, October 19-26, 1980 TWO SIMPLE TOOLS FOR DESIGN

  11. Community Solar Scenario Tool: Planning for a Fruitful Solar Garden

    Office of Energy Efficiency and Renewable Energy (EERE)

    As part of a Do-It-Yourself Solar Market Analysis summer series, NREL's Solar Technical Assistance Team (STAT) is presenting a live webinar titled, "Community Solar Scenario Tool: Planning for a...

  12. Comparative guide to emerging diagnostic tools for large commercial HVAC systems

    SciTech Connect (OSTI)

    Friedman, Hannah; Piette, Mary Ann

    2001-05-01T23:59:59.000Z

    This guide compares emerging diagnostic software tools that aid detection and diagnosis of operational problems for large HVAC systems. We have evaluated six tools for use with energy management control system (EMCS) or other monitoring data. The diagnostic tools summarize relevant performance metrics, display plots for manual analysis, and perform automated diagnostic procedures. Our comparative analysis presents nine summary tables with supporting explanatory text and includes sample diagnostic screens for each tool.

  13. Development Tools at NERSC

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625govInstrumentstdmadapInactiveVisitingContract Management FermiDavid Turner David3DepthDetectingNERSC Helps3Tools

  14. 5, 12291261, 2012 diagnostic tool

    E-Print Network [OSTI]

    Gettelman, Andrew

    GMDD 5, 1229­1261, 2012 Community diagnostic tool A. Gettelman et al. Title Page Abstract to the corresponding final paper in GMD if available. A community diagnostic tool for Chemistry Climate Model Community diagnostic tool A. Gettelman et al. Title Page Abstract Introduction Conclusions References Tables

  15. Command Line Tools Cloud Computing

    E-Print Network [OSTI]

    Ferrara, Katherine W.

    Command Line Tools Cloud Computing #12;Everybody (or nearly everybody) loves GUI. AWS Command Line of advanced features. After surviving the cloud computing class till now, Your are almost a command line guru! You need AWS command line tools, ec2-api-tools, to maximize the power of AWS cloud computing. Plugging

  16. EMP (electromagnetic pulse) representational tools for personal workstations

    SciTech Connect (OSTI)

    Riley, A.; Shafer, D.

    1987-01-01T23:59:59.000Z

    The ability to rapidly provide a visual representation of a problem set, its accompanying environment, and the variables that directly impact the analysis is of enormous value to the weapons analyst. Parametric, first-principle tools are directly and immediately usable by the analyst to represent the systems under investigation and the effects on those systems by the weapons under analysis. The three tools described, GEOREP, 3-AXIS, and G RANGE, provide these visual, analytic tools directly to the analyst on personal computer workstations. The simplicity and rapidity with which these tools may be used are especially beneficial to weapons analysts dealing with complex phenomena such as EMP. The potential flexibility of these representational tools is shown through examples of notional weapons applications. Use of GEOREP, 3-AXIS, and G RANGE, which augment, rather than supplant, complex weapons effects physics codes, can help provide the necessary, cost-effective guidance for making decisions on detailed case studies.

  17. Tools and Equipment Modeling for Automobile Interactive Assembling Operating Simulation

    SciTech Connect (OSTI)

    Wu Dianliang; Zhu Hongmin [Shanghai Jiao Tong University (China); Shanghai Key Laboratory of Advance Manufacturing Environment (China)

    2010-05-21T23:59:59.000Z

    Tools and equipment play an important role in the simulation of virtual assembly, especially in the assembly process simulation and plan. Because of variety in function and complexity in structure and manipulation, the simulation of tools and equipments remains to be a challenge for interactive assembly operation. Based on analysis of details and characteristics of interactive operations for automobile assembly, the functional requirement for tools and equipments of automobile assembly is given. Then, a unified modeling method for information expression and function realization of general tools and equipments is represented, and the handling methods of manual, semi-automatic, automatic tools and equipments are discussed. Finally, the application in assembly simulation of rear suspension and front suspension of Roewe 750 automobile is given. The result shows that the modeling and handling methods are applicable in the interactive simulation of various tools and equipments, and can also be used for supporting assembly process planning in virtual environment.

  18. Butt Joint Tool Commissioning

    SciTech Connect (OSTI)

    Martovetsky, N N

    2007-12-06T23:59:59.000Z

    ITER Central Solenoid uses butt joints for connecting the pancakes in the CS module. The principles of the butt joining of the CICC were developed by the JAPT during CSMC project. The difference between the CSMC butt joint and the CS butt joint is that the CS butt joint is an in-line joint, while the CSMC is a double joint through a hairpin jumper. The CS butt joint has to carry the hoop load. The straight length of the joint is only 320 mm, and the vacuum chamber around the joint has to have a split in the clamp shell. These requirements are challenging. Fig.1 presents a CSMC joint, and Fig.2 shows a CS butt joint. The butt joint procedure was verified and demonstrated. The tool is capable of achieving all specified parameters. The vacuum in the end was a little higher than the target, which is not critical and readily correctable. We consider, tentatively that the procedure is established. Unexpectedly, we discover significant temperature nonuniformity in the joint cross section, which is not formally a violation of the specs, but is a point of concern. All testing parameters are recorded for QA purposes. We plan to modify the butt joining tool to improve its convenience of operation and provide all features necessary for production of butt joints by qualified personnel.

  19. Downhole tool adapted for telemetry

    DOE Patents [OSTI]

    Hall, David R. (Provo, UT); Fox, Joe (Provo, UT)

    2010-12-14T23:59:59.000Z

    A cycleable downhole tool such as a Jar, a hydraulic hammer, and a shock absorber adapted for telemetry. This invention applies to other tools where the active components of the tool are displaced when the tool is rotationally or translationally cycled. The invention consists of inductive or contact transmission rings that are connected by an extensible conductor. The extensible conductor permits the transmission of the signal before, after, and during the cycling of the tool. The signal may be continuous or intermittent during cycling. The invention also applies to downhole tools that do not cycle, but in operation are under such stress that an extensible conductor is beneficial. The extensible conductor may also consist of an extensible portion and a fixed portion. The extensible conductor also features clamps that maintain the conductor under stresses greater than that seen by the tool, and seals that are capable of protecting against downhole pressure and contamination.

  20. Decision Analysis for EGS | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Decision Analysis for EGS Decision Analysis for EGS Project objectives: DEVELOPMENT OF ANALYSIS TOOLS TO ASSESS: Uncertainties associated with exploration for EGS; Uncertainties...

  1. Electronic authoring tools

    SciTech Connect (OSTI)

    Hurford, J.M.

    1987-01-01T23:59:59.000Z

    More than a decade ago, word processing software revolutionized the way documents were prepared, and productivity was increased. But the editing and formatting capabilities of most word processors did very little to prevent errors in spelling, typing, grammar, diction, style, or organization from slipping through to the final documents. In the past few years, the number of software tools that aid the author has increased substantially. They now vary in scope from simple spelling checkers to sophisticated diction analyzers and idea processors. Moreover, writing-aid-software described in this report is now available for many types of computing systems, including personal computers, scientific workstations, and mainframes. The various pieces of software can be used in interactive or non-interactive (batch) modes.

  2. Steam System Tool Suite Introduction Guide

    E-Print Network [OSTI]

    Oak Ridge National Laboratory

    Steam System Tool Suite Introduction Guide Alternate Text Narratives and Graphic.............................................................................................................................6 Modules Steam System Scoping Tool (SSST)........................................................................................8 Steam System Assessment Tool (SSAT

  3. Sandia Energy - Smart Grid Tools and Technology

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Smart Grid Tools and Technology Home Stationary Power Grid Modernization Renewable Energy Integration Smart Grid Tools and Technology Smart Grid Tools and TechnologyTara...

  4. ORISE: Media Analysis and Monitoring

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Media Analysis and Monitoring The Oak Ridge Institute for Science and Education (ORISE) uses comprehensive media analysis and monitoring tools to define media interest and the...

  5. Just tooling around: Experiences with arctools

    SciTech Connect (OSTI)

    Tuttle, M.A. [Tennessee Univ., Knoxville, TN (United States). Dept. of Computer Sciences

    1994-06-01T23:59:59.000Z

    The three US Department of Energy (DOE) Installations on the Oak Ridge Reservation (Oak Ridge National Laboratory, Y-12 and K-25) were established during World War II as part of the Manhattan Project to build ``the bomb.`` In later years, the work at these facilities involved nuclear energy research, defense-related activities, and uranium enrichment, resulting in the generation of radioactive material and other toxic by-products. Work is now in progress to identify and clean up the environmental contamination from these and other wastes. Martin Marietta Energy Systems, Inc., which manages the Oak Ridge sites as well as DOE installations at Portsmouth, Ohio and Paducah, Kentucky, has been charged with creating and maintaining a comprehensive environmental information system in order to comply with the Federal Facility Agreement (FFA) for the Oak Ridge Reservation and the State of Tennessee Oversight Agreement between the US Department of Energy and the State of Tennessee. As a result, the Oak Ridge Environmental Information System (OREIS) was conceived and is currently being implemented. The tools chosen for the OREIS system are Oracle for the relational database, SAS for data analysis and graphical representation, and Arc/INFO and ArcView for the spatial analysis and display component. Within the broad scope of ESRI`s Arc/Info software, ArcTools was chosen as the graphic user interface for inclusion of Arc/Info into OREIS. The purpose of this paper is to examine in the advantages and disadvantages of incorporating ArcTools for the presentation of Arc/INFO in the OREIS system. The immediate and mid-term development goals of the OREIS system as they relate to ArcTools will be presented. A general discussion of our experiences with the ArcTools product is also included.

  6. New Applications of Gamma Spectroscopy: Characterization Tools for D&D Process Development, Inventory Reduction Planning & Shipping, Safety Analysis & Facility Management During the Heavy Element Facility Risk Reduction Program

    SciTech Connect (OSTI)

    Mitchell, M; Anderson, B; Gray, L; Vellinger, R; West, M; Gaylord, R; Larson, J; Jones, G; Shingleton, J; Harris, L; Harward, N

    2006-01-23T23:59:59.000Z

    Novel applications of gamma ray spectroscopy for D&D process development, inventory reduction, safety analysis and facility management are discussed in this paper. These applications of gamma spectroscopy were developed and implemented during the Risk Reduction Program (RPP) to successfully downgrade the Heavy Element Facility (B251) at Lawrence Livermore National Laboratory (LLNL) from a Category II Nuclear Facility to a Radiological Facility. Non-destructive assay in general, gamma spectroscopy in particular, were found to be important tools in project management, work planning, and work control (''Expect the unexpected and confirm the expected''), minimizing worker dose, and resulted in significant safety improvements and operational efficiencies. Inventory reduction activities utilized gamma spectroscopy to identify and confirm isotopics of legacy inventory, ingrowth of daughter products and the presence of process impurities; quantify inventory; prioritize work activities for project management; and to supply information to satisfy shipper/receiver documentation requirements. D&D activities utilize in-situ gamma spectroscopy to identify and confirm isotopics of legacy contamination; quantify contamination levels and monitor the progress of decontamination efforts; and determine the point of diminishing returns in decontaminating enclosures and glove boxes containing high specific activity isotopes such as {sup 244}Cm and {sup 238}Pu. In-situ gamma spectroscopy provided quantitative comparisons of several decontamination techniques (e.g. TLC-free Stripcoat{trademark}, Radiac{trademark} wash, acid wash, scrubbing) and was used as a part of an iterative process to determine the appropriate level of decontamination and optimal cost to benefit ratio. Facility management followed a formal, rigorous process utilizing an independent, state certified, peer-reviewed gamma spectroscopy program, in conjunction with other characterization techniques, process knowledge, and historical records, to provide information for work planning, work prioritization, work control, and safety analyses (e.g. development of hold points, stop work points); and resulted in B251 successfully achieving Radiological status on schedule. Gamma spectroscopy helped to define operational approaches to achieve radiation exposure ALARA, e.g. hold points, appropriate engineering controls, PPE, workstations, and time/distance/shielding in the development of ALARA plans. These applications of gamma spectroscopy can be used to improve similar activities at other facilities.

  7. A Retrofit Tool for Improving Energy Efficiency of Commercial Buildings

    SciTech Connect (OSTI)

    Levine, Mark; Feng, Wei; Ke, Jing; Hong, Tianzhen; Zhou, Nan

    2013-06-06T23:59:59.000Z

    Existing buildings will dominate energy use in commercial buildings in the United States for three decades or longer and even in China for the about two decades. Retrofitting these buildings to improve energy efficiency and reduce energy use is thus critical to achieving the target of reducing energy use in the buildings sector. However there are few evaluation tools that can quickly identify and evaluate energy savings and cost effectiveness of energy conservation measures (ECMs) for retrofits, especially for buildings in China. This paper discusses methods used to develop such a tool and demonstrates an application of the tool for a retrofit analysis. The tool builds on a building performance database with pre-calculated energy consumption of ECMs for selected commercial prototype buildings using the EnergyPlus program. The tool allows users to evaluate individual ECMs or a package of ECMs. It covers building envelope, lighting and daylighting, HVAC, plug loads, service hot water, and renewable energy. The prototype building can be customized to represent an actual building with some limitations. Energy consumption from utility bills can be entered into the tool to compare and calibrate the energy use of the prototype building. The tool currently can evaluate energy savings and payback of ECMs for shopping malls in China. We have used the tool to assess energy and cost savings for retrofit of the prototype shopping mall in Shanghai. Future work on the tool will simplify its use and expand it to cover other commercial building types and other countries.

  8. Make the Most of Your Time: How Should the Analyst Work with Automated Traceability Tools?

    E-Print Network [OSTI]

    Dekhtyar, Alexander

    software engineer or analyst to make decisions or judgments based on the output of an automated tool. For example, a software architect may examine the outputs of a cost benefit analysis tool to decide on a particular architecture; a project manager may examine the output of a risk assessment tool to determine what

  9. Slide system for machine tools

    DOE Patents [OSTI]

    Douglass, S.S.; Green, W.L.

    1980-06-12T23:59:59.000Z

    The present invention relates to a machine tool which permits the machining of nonaxisymmetric surfaces on a workpiece while rotating the workpiece about a central axis of rotation. The machine tool comprises a conventional two-slide system (X-Y) with one of these slides being provided with a relatively short travel high-speed auxiliary slide which carries the material-removing tool. The auxiliary slide is synchronized with the spindle speed and the position of the other two slides and provides a high-speed reciprocating motion required for the displacement of the cutting tool for generating a nonaxisymmetric surface at a selected location on the workpiece.

  10. Automated energy monitoring of machine tools

    E-Print Network [OSTI]

    Vijayaraghavan, Athulan; Dornfeld, David

    2010-01-01T23:59:59.000Z

    in manufacturing the tooling for many consumer products,process parameters, tooling, and cutting ?uid based on

  11. Information Technology Tools for Multifamily Building Programs...

    Energy Savers [EERE]

    Information Technology Tools for Multifamily Building Programs Information Technology Tools for Multifamily Building Programs Better Buildings Neighborhood Program Multifamily ...

  12. Natural System Evaluation and Tool Development: International...

    Energy Savers [EERE]

    Natural System Evaluation and Tool Development: International Collaborations - FY'13 Progress Report Natural System Evaluation and Tool Development: International Collaborations -...

  13. Your UNIX Account Basic Unix Tools

    E-Print Network [OSTI]

    Qiu, Weigang

    Your UNIX Account 2 Basic Unix Tools 3 Unix Power Tools Weigang Qiu Introduction & UNIX Tutorial #12 & UNIX Tutorial #12;Your UNIX Account Basic Unix Tools Unix Power Tools UNIX Directory Structure FileYour UNIX Account Basic Unix Tools Unix Power Tools Introduction & UNIX Tutorial Weigang Qiu

  14. Vehicle assisted harpoon breaching tool

    DOE Patents [OSTI]

    Pacheco, James E. (Albuquerque, NM); Highland, Steven E. (Albuquerque, NM)

    2011-02-15T23:59:59.000Z

    A harpoon breaching tool that allows security officers, SWAT teams, police, firemen, soldiers, or others to forcibly breach metal doors or walls very quickly (in a few seconds), without explosives. The harpoon breaching tool can be mounted to a vehicle's standard receiver hitch.

  15. Computational Tools for Supersymmetry Calculations

    E-Print Network [OSTI]

    Howard Baer

    2009-12-16T23:59:59.000Z

    I present a brief overview of a variety of computational tools for supersymmetry calculations, including: spectrum generators, cross section and branching fraction calculators, low energy constraints, general purpose event generators, matrix element event generators, SUSY dark matter codes, parameter extraction codes and Les Houches interface tools.

  16. Tools for charged Higgs bosons

    E-Print Network [OSTI]

    Oscar Stål

    2010-12-13T23:59:59.000Z

    We review the status of publicly available software tools applicable to charged Higgs physics. A selection of codes are highlighted in more detail, focusing on new developments that have taken place since the previous charged Higgs workshop in 2008. We conclude that phenomenologists now have the tools ready to face the LHC data. A new webpage collecting charged Higgs resources is presented.

  17. KLA-Tencor's Inspection Tool Reduces LED Manufacturing Costs

    Broader source: Energy.gov [DOE]

    With the help of DOE funding, KLA-Tencor is developing an improved inspection tool for LED manufacturing that promises to significantly increase overall process yields and minimize expensive waste. The power of the inspection tool lies in optical detection techniques coupled with defect source analysis software to statistically correlate front-end geometric anomalies in the substrate to killer defects on the back end of the manufacturing line, which give rise to an undesirable or unusable end product.

  18. 9. Analysis a. Analysis tools for dam removal

    E-Print Network [OSTI]

    Tullos, Desiree

    (Randle 2003). Mechanical removal, or dredging, involves removing some or all of the reservoir sediment infrastructure and landowners, downstream confinement, presence of threatened and endangered species, and cost in stages) and type (fine or contaminated sediment can be removed through dredging prior to sediment release

  19. DBridge: A Program Rewrite Tool for Set-Oriented Query Execution

    E-Print Network [OSTI]

    Sudarshan, S.

    -- We present DBridge, a novel static analysis and program transformation tool to optimize database from static analysis of the program. The proposed program transformation rules are powerful enough optimzier and the language compiler re- spectively, leaving out many optimization opportunities. Our tool

  20. Electrical contact tool set station

    DOE Patents [OSTI]

    Byers, M.E.

    1988-02-22T23:59:59.000Z

    An apparatus is provided for the precise setting to zero of electrically conductive cutting tools used in the machining of work pieces. An electrically conductive cylindrical pin, tapered at one end to a small flat, rests in a vee-shaped channel in a base so that its longitudinal axis is parallel to the longitudinal axis of the machine's spindle. Electronic apparatus is connected between the cylindrical pin and the electrically conductive cutting tool to produce a detectable signal when contact between tool and pin is made. The axes of the machine are set to zero by contact between the cutting tool and the sides, end or top of the cylindrical pin. Upon contact, an electrical circuit is completed, and the detectable signal is produced. The tool can then be set to zero for that axis. Should the tool contact the cylindrical pin with too much force, the cylindrical pin would be harmlessly dislodged from the vee-shaped channel, preventing damage either to the cutting tool or the cylindrical pin. 5 figs.

  1. Tools for the Mentee | Department of Energy

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directed offOCHCO Overview OCHCOSystems Analysis Success| Department of EnergyTimothy J.TonyTools for the

  2. Design Tool for Cryogenic Thermal Insulation Systems

    SciTech Connect (OSTI)

    Demko, Jonathan A [ORNL] [ORNL; Fesmire, J. E. [NASA Kennedy Space Center, Kennedy Space Center, Florida] [NASA Kennedy Space Center, Kennedy Space Center, Florida; Augustynowicz, S. D. [Sierra Lobo Inc., Kennedy Space Center, Florida] [Sierra Lobo Inc., Kennedy Space Center, Florida

    2008-01-01T23:59:59.000Z

    Thermal isolation of low-temperature systems from ambient environments is a constant issue faced by practitioners of cryogenics. For energy-efficient systems and processes to be realized, thermal insulation must be considered as an integrated system, not merely an add-on element. A design tool to determine the performance of insulation systems for comparative trade-off studies of different available material options was developed. The approach is to apply thermal analysis to standard shapes (plane walls, cylinders, spheres) that are relatively simple to characterize with a one-dimensional analytical or numerical model. The user describes the system hot and cold boundary geometry and the operating environment. Basic outputs such as heat load and temperature profiles are determined. The user can select from a built-in insulation material database or input user defined materials. Existing information has been combined with the new experimental thermal conductivity data produced by the Cryogenics Test Laboratory for cryogenic and vacuum environments, including high vacuum, soft vacuum, and no vacuum. Materials in the design tool include multilayer insulation, aerogel blankets, aerogel bulk-fill, foams, powders, composites, and other insulation system constructions. A comparison of the design tool to a specific composite thermal insulation system is given.

  3. Strategic Analysis of the Global Status of Carbon Capture and...

    Open Energy Info (EERE)

    Strategic Analysis of the Global Status of Carbon Capture and Storage (CCS): Country Studies, United Arab Emirates Jump to: navigation, search Tool Summary LAUNCH TOOL Name:...

  4. Cost-Benefit Analysis of Smart Grid Technologies Through System...

    Open Energy Info (EERE)

    Simulations Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Spain Installed Wind Capacity Website Focus Area: Renewable Energy Topics: Market Analysis Website:...

  5. State Clean Energy Policies Analysis (SCEPA): State Policy and...

    Open Energy Info (EERE)

    Manufacturing Jump to: navigation, search Tool Summary LAUNCH TOOL Name: State Clean Energy Policies Analysis (SCEPA): State Policy and the Pursuit of Renewable Energy...

  6. NETL - Petroleum-Based Fuels Life Cycle Greenhouse Gas Analysis...

    Open Energy Info (EERE)

    Tool Summary LAUNCH TOOL Name: NETL - Petroleum-Based Fuels Life Cycle Greenhouse Gas Analysis 2005 Baseline Model AgencyCompany Organization: National Energy Technology...

  7. Tools for dynamic model development

    E-Print Network [OSTI]

    Schaber, Spencer Daniel

    2014-01-01T23:59:59.000Z

    For this thesis, several tools for dynamic model development were developed and analyzed. Dynamic models can be used to simulate and optimize the behavior of a great number of natural and engineered systems, from the ...

  8. Management System Verification (MSV) Tool

    Broader source: Energy.gov [DOE]

    The MSV process developed by ACC is a tool (not a requirement) that DOE sites may consider to help determine whether their ES&H program is truly integrated into all work at all levels by all employees.

  9. Running tool for liner hanger

    SciTech Connect (OSTI)

    Melenyzer, G.J.

    1990-03-27T23:59:59.000Z

    This patent describes a running tool. It is for a liner hanger having an annular groove in its bore, and upwardly facing slots in its upper end, and a liner string depending therefrom.

  10. Design tools for passive solar applications

    SciTech Connect (OSTI)

    Balcomb, J.D.

    1986-04-01T23:59:59.000Z

    Examples of passive solar design tools are given, categorized as either evaluation tools or guidance tools. A trend toward microcomputer-based tools is noted; however, these are usually developed for use by engineers rather than architects. The need for more instructive tools targeted specifically to designers is emphasized.

  11. Seal for fluid forming tools

    DOE Patents [OSTI]

    Golovashchenko, Sergey Fedorovich (Beverly Hills, MI); Bonnen, John Joseph Francis (Milford, MI)

    2012-03-20T23:59:59.000Z

    An electro-hydraulic forming tool for forming a sheet metal blank in a one-sided die has first and second rigid rings that engage opposite sides of a sheet metal blank. The rigid rings are contained within slots on a die portion and a hydraulic force applicator portion of the forming tool. The seals are either resiliently biased by an elastomeric member or inherently resiliently biased into contact with the blank.

  12. Eastern Energy Zones Mapping Tool

    Broader source: Energy.gov [DOE]

    The Eastern Interconnection States’ Planning Council (EISPC) has released the Energy Zones (EZ) Mapping Tool, a free, web-based interactive tool that will help states and other stakeholders in the Eastern Interconnection identify geographic areas suitable for the development of clean energy resources (natural gas, sequestration or utilitization locations for C02 from coal, nuclear, and renewable) which can potentially provide significant amounts of new electric power generation.

  13. Finite element analyses of tool stresses in metal cutting processes

    SciTech Connect (OSTI)

    Kistler, B.L. [Sandia National Labs., Livermore, CA (United States)

    1997-01-01T23:59:59.000Z

    In this report, we analytically predict and examine stresses in tool tips used in high speed orthogonal machining operations. Specifically, one analysis was compared to an existing experimental measurement of stresses in a sapphire tool tip cutting 1020 steel at slow speeds. In addition, two analyses were done of a carbide tool tip in a machining process at higher cutting speeds, in order to compare to experimental results produced as part of this study. The metal being cut was simulated using a Sandia developed damage plasticity material model, which allowed the cutting to occur analytically without prespecifying the line of cutting/failure. The latter analyses incorporated temperature effects on the tool tip. Calculated tool forces and peak stresses matched experimental data to within 20%. Stress contours generally agreed between analysis and experiment. This work could be extended to investigate/predict failures in the tool tip, which would be of great interest to machining shops in understanding how to optimize cost/retooling time.

  14. Introduction Two Applications Basic Operations Tools Overview of the Tools A Survey of Techniques Used in

    E-Print Network [OSTI]

    Agrawal, Manindra

    Introduction Two Applications Basic Operations Tools Overview of the Tools A Survey of Techniques and IIT Kanpur Kunming Tutorial, May 2005 #12;Introduction Two Applications Basic Operations Tools Cryptography Application: RSA Cryptosystem Complexity of Basic Operations Tools for Designing Algorithms

  15. Computational Tools for Accelerating Carbon Capture Process Development

    SciTech Connect (OSTI)

    Miller, David

    2013-01-01T23:59:59.000Z

    The goals of the work reported are: to develop new computational tools and models to enable industry to more rapidly develop and deploy new advanced energy technologies; to demonstrate the capabilities of the CCSI Toolset on non-proprietary case studies; and to deploy the CCSI Toolset to industry. Challenges of simulating carbon capture (and other) processes include: dealing with multiple scales (particle, device, and whole process scales); integration across scales; verification, validation, and uncertainty; and decision support. The tools cover: risk analysis and decision making; validated, high-fidelity CFD; high-resolution filtered sub-models; process design and optimization tools; advanced process control and dynamics; process models; basic data sub-models; and cross-cutting integration tools.

  16. VISTA - computational tools for comparative genomics

    E-Print Network [OSTI]

    Frazer, Kelly A.; Pachter, Lior; Poliakov, Alexander; Rubin, Edward M.; Dubchak, Inna

    2004-01-01T23:59:59.000Z

    tools for comparative genomics Kelly A. Frazer 1 , LiorBerkeley, CA, 94720 Genomics Division, Lawrence Berkeleymultiple comparative genomics tools and provides users with

  17. Tools for Living and Tools for Learning Stefan Carmien and Gerhard Fischer

    E-Print Network [OSTI]

    Fischer, Gerhard

    Tools for Living and Tools for Learning Stefan Carmien and Gerhard Fischer University of Colorado as tools, particularly computational artifacts. We introduce the notions of tools for living and tools for the design of artifacts. The tools concept is then studied in the context of the Memory Aiding Prompting

  18. Combination drilling and skiving tool

    DOE Patents [OSTI]

    Stone, William J. (Kansas City, MO)

    1989-01-01T23:59:59.000Z

    A combination drilling and skiving tool including a longitudinally extending hollow skiving sleeve slidably and concentrically mounted on a right-handed twist drill. Dogs or pawls provided on the internal periphery of the skiving sleeve engage with the helical grooves of the drill. During a clockwise rotation of the tool, the drill moves downwardly and the sleeve translates upwardly, so that the drill performs a drilling operation on a workpiece. On the other hand, the drill moves upwardly and the sleeve translates downwardly, when the tool is rotated in a counter-clockwise direction, and the sleeve performs a skiving operation. The drilling and skiving operations are separate, independent and exclusive of each other.

  19. Tools for measuring surface cleanliness

    DOE Patents [OSTI]

    Schroder, Mark Stewart (Hendersonville, NC); Woodmansee, Donald Ernest (Simpsonville, SC); Beadie, Douglas Frank (Greenville, SC)

    2002-01-01T23:59:59.000Z

    A procedure and tools for quantifying surface cleanliness are described. Cleanliness of a target surface is quantified by wiping a prescribed area of the surface with a flexible, bright white cloth swatch, preferably mounted on a special tool. The cloth picks up a substantial amount of any particulate surface contamination. The amount of contamination is determined by measuring the reflectivity loss of the cloth before and after wiping on the contaminated system and comparing that loss to a previous calibration with similar contamination. In the alternative, a visual comparison of the contaminated cloth to a contamination key provides an indication of the surface cleanliness.

  20. Analytic tools for information warfare

    SciTech Connect (OSTI)

    Vandewart, R.L.; Craft, R.L.

    1996-05-01T23:59:59.000Z

    Information warfare and system surety (tradeoffs between system functionality, security, safety, reliability, cost, usability) have many mechanisms in common. Sandia`s experience has shown that an information system must be assessed from a {ital system} perspective in order to adequately identify and mitigate the risks present in the system. While some tools are available to help in this work, the process is largely manual. An integrated, extensible set of assessment tools would help the surety analyst. This paper describes one approach to surety assessment used at Sandia, identifies the difficulties in this process, and proposes a set of features desirable in an automated environment to support this process.

  1. InfoCrystal: A visual tool for information retrieval

    E-Print Network [OSTI]

    Spoerri, Anselm

    of interest. The lnfocrystal allows users to specify Boolean as well as vector- space queries graphically C r y s t a l T M ,that can be used as a visualization tool as well as a visual query lan- guage more readily than a direct analysis of the numbers would. Similarly, information visualization seeks

  2. WebSPN: NonMarkovian Stochastic Petri Net Tool

    E-Print Network [OSTI]

    Telek, Miklós

    browser. Keywords: Non­Markovian SPN, transient analysis, Java technology, Word Wide Web. 1 Introduction concurrently enabled generally distributed transitions. WebSPN makes wide use of Java technologyWebSPN: Non­Markovian Stochastic Petri Net Tool A. Bobbio x, A. Puliafito *, M. Scarpa x, M. Telek

  3. Human Factors Evaluation of Advanced Electric Power Grid Visualization Tools

    SciTech Connect (OSTI)

    Greitzer, Frank L.; Dauenhauer, Peter M.; Wierks, Tamara G.; Podmore, Robin

    2009-04-01T23:59:59.000Z

    This report describes initial human factors evaluation of four visualization tools (Graphical Contingency Analysis, Force Directed Graphs, Phasor State Estimator and Mode Meter/ Mode Shapes) developed by PNNL, and proposed test plans that may be implemented to evaluate their utility in scenario-based experiments.

  4. Freiburg RNA Tools: a web server integrating IntaRNA, ExpaRNA and LocARNA

    E-Print Network [OSTI]

    Smith, Cameron

    The Freiburg RNA tools web server integrates three tools for the advanced analysis of RNA in a common web-based user interface. The tools IntaRNA, ExpaRNA and LocARNA support the prediction of RNA–RNA interaction, exact ...

  5. Study of residential dehumidifiers results in practical performance curves for use in whole-building simulation tools.

    E-Print Network [OSTI]

    -building simulation tools. Dehumidifiers remove moisture from a home's indoor environment, thereby increasing occupant dehumidifier to be simulated in whole-building analysis tools. NREL researchers also defined a new, generalized determine moisture removal capacities and efficiencies.Whole-building simulation tool performance curves

  6. Energy Performance Certification of Buildings: A Policy Tool...

    Open Energy Info (EERE)

    Buildings: A Policy Tool to Improve Energy Efficiency Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Energy Performance Certification of Buildings: A Policy Tool to...

  7. DREAM tool increases space weather predictions

    E-Print Network [OSTI]

    - 1 - DREAM tool increases space weather predictions April 13, 2012 Predicting space weather improved by new DREAM modeling tool Earth's radiation belts can now be studied with a new modeling tool DREAM comes into play. Radiation belt structure and dynamics revealed DREAM is a modeling tool

  8. Search Tool for Leveraged Procurement Agreements

    E-Print Network [OSTI]

    Search Tool for Leveraged Procurement Agreements (LPA) Illustrated User Manual #12;2 Search Tool://www.bidsync.com #12;3 Search Tool for Leveraged Procurement Agreements (LPA) Rev. 5/5/09 Introduction Bid: Select Search Contracts/Leveraged Procurement Agreements (LPA's). #12;4 Search Tool for Leveraged

  9. Article Tools Printer-friendly

    E-Print Network [OSTI]

    Espinosa, Horacio D.

    disease detection combines Nature's diagnostic tools with nanotechnology and electronics Posted: Nov 7th nanomaterials design and production Posted: Nov 6th, 2008 New research fuels continued growth of San Diego Clean-Tech cluster Posted: Nov 6th, 2008 Tiny solar cells power carbon nanotube sensor Posted: Nov 6th, 2008 Thailand

  10. TITANium Tips Assignment Tool tips

    E-Print Network [OSTI]

    de Lijser, Peter

    TITANium Tips Assignment Tool tips: 1. Due Date: If a due date is set, this information(s). For more Assignment tips, go to: FDC FAQ page: http://fdc.fullerton.edu/titanium/faqs.html#assessing FDC Assignment support page: http://fdc.fullerton.edu/titanium/tii_support.html Tips for TurnItIn Assignment 1

  11. From Metaphor to Analytic Tool

    E-Print Network [OSTI]

    Process Tracing From Metaphor to Analytic Tool Edited by ANDREW BENNETT and JEFFREY T. CHECKEL process tracing." Andrew Bennett is Professor of Government at Georgetown Uni versity. He is also: © VvoeVale/iStock.com series cover design: sue watson "Bennett and Checkel have assembled an im- pressive

  12. Bioenergy 2015: Attendee Networking Tool

    Broader source: Energy.gov [DOE]

    For the Bioenergy 2015 Conference, this tool offers a concise listing of participants' background, areas of expertise, areas of need, and business contact information. Users can sort the information by clicking on the arrows in the header rows. Users can also filter by keywords by typing them into the search field in order to find individuals with skill sets complementary to their own.

  13. Interactive graphical tools for three-dimensional mesh redistribution

    SciTech Connect (OSTI)

    Dobbs, L.A.

    1996-03-01T23:59:59.000Z

    Three-dimensional meshes modeling nonlinear problems such as sheet metal forming, metal forging, heat transfer during welding, the propagation of microwaves through gases, and automobile crashes require highly refined meshes in local areas to accurately represent areas of high curvature, stress, and strain. These locally refined areas develop late in the simulation and/or move during the course of the simulation, thus making it difficult to predict their exact location. This thesis is a systematic study of new tools scientists can use with redistribution algorithms to enhance the solution results and reduce the time to build, solve, and analyze nonlinear finite element problems. Participatory design techniques including Contextual Inquiry and Design were used to study and analyze the process of solving such problems. This study and analysis led to the in-depth understanding of the types of interactions performed by FEM scientists. Based on this understanding, a prototype tool was designed to support these interactions. Scientists participated in evaluating the design as well as the implementation of the prototype tool. The study, analysis, prototype tool design, and the results of the evaluation of the prototype tool are described in this thesis.

  14. Better IAQ through integrating design tools for the HVACindustry

    SciTech Connect (OSTI)

    Laine, Tuomas; Kosonen, Risto; Hagstrom, Kim; Mustakallio, Panu; Yin, De-Wei; Haves, Philip; Chen, Qingyan

    2000-06-01T23:59:59.000Z

    There is currently no effective combination of interoperable design tools to cover all critical aspects of the HVAC design process. Existing design tools are separately available, but require expertise and operating time that is beyond the scope of a normal design project. For example, energy analysis and computational fluid dynamics (CFD) tools are not used in practical design, leading to poor indoor air quality and/or unnecessary energy consumption in buildings. A prototype integrated software tool for demonstration, process mapping and proof-of-concept purposes was developed under a new international, Finland/USA jointly funded development project BildIT. Individual design tools were simplified and adapted to specific applications and also integrated so that they can be used in a timely and effective manner by the designer. The core of the prototype linked together an architectural CAD system, a 3D space model, a CFD program and a building energy simulation program and it utilizes real product data from manufacturer's software. Also the complex building design, construction, maintenance and retrofit processes were mapped to get a template for the structure of the integrated design tool.

  15. An evaluation of the use of a tool balancer with pneumatic screwdrivers

    E-Print Network [OSTI]

    Phillips, Laura Leigh

    1989-01-01T23:59:59.000Z

    result in temporary or permanent disabilities. The frequent occurrence of these disorders has led to an increased awareness of the causes of cumulative trauma disorders and to further research in the prevention of cumulative trauma disorders. ulative.... 6) Assess subjective ranking of the tool set-ups used to perform the task. Analysis of this data will allow the determination of the utility of the tool balancer for this type of task and the more effective screwdriver/tool balancer combination...

  16. June 15-16, 2001 SPLST 2001 -Szeged, Hungary 1 Columbus -Tool for Reverse Engineering

    E-Print Network [OSTI]

    Ferenc, Rudolf

    June 15-16, 2001 SPLST 2001 - Szeged, Hungary 1 Columbus - Tool for Reverse Engineering Large;June 15-16, 2001 SPLST 2001 - Szeged, Hungary 2 Introduction · Software systems are rapidly growing" [Chikofsky et al.] #12;June 15-16, 2001 SPLST 2001 - Szeged, Hungary 3 Assessment of RE tools · Analysis

  17. PIR Web-Based Tools and Databases for Genomic and Proteomic Research

    E-Print Network [OSTI]

    PIR Web-Based Tools and Databases for Genomic and Proteomic Research Barker, W.C., Chen, Y., Hu, Z 20007-2195 We have recently expanded the Web site of the Protein Information Resource (PIR) with new web-based tools to facilitate data retrieval, sequence analysis and protein annotation. The PIR

  18. USING VIDEO FOR ANALYZING DAYLIGHT SIMULATION TOOLS Daniel C. Glaser1

    E-Print Network [OSTI]

    Varela, Carlos

    USING VIDEO FOR ANALYZING DAYLIGHT SIMULATION TOOLS Daniel C. Glaser1 , F. Whitney Smith2 , Barb socio-technical techniques can be employed to analyze video data of people using daylight simulation, a classic daylighting analysis tool; and in the second a lighting professional is asked to use a new data

  19. Experimental Evaluation of Electric Power Grid Visualization Tools in the EIOC

    SciTech Connect (OSTI)

    Greitzer, Frank L.; Dauenhauer, Peter M.; Wierks, Tamara G.; Podmore, Robin; Dalton, Angela C.

    2009-12-01T23:59:59.000Z

    The present study follows an initial human factors evaluation of four electric power grid visualization tools and reports on an empirical evaluation of two of the four tools: Graphical Contingency Analysis, and Phasor State Estimator. The evaluation was conducted within specific experimental studies designed to measure the impact on decision making performance.

  20. Wrought iron hand tools from the underwater archaelogical excavations of colonial Port Royal, Jamaica, C. 1692

    E-Print Network [OSTI]

    Custer, Katie Michelle

    2004-01-01T23:59:59.000Z

    was brought back to life and interpreted. A large collection of iron hand tools from this site was preserved. These conserved and replicated artifacts are now available for analysis. This thesis is a continuation of the catalog of hand tools from...

  1. A Semi-automated Commissioning Tool for VAV Air Handling Units

    E-Print Network [OSTI]

    and that faults in HVAC systems are widespread in commercial buildings. There is a lack of skilled people between the data analysis tool and the building energy management and control system (EMCS) is harderA Semi-automated Commissioning Tool for VAV Air Handling Units: Functional Test Analyzer 1 2 3 4 5

  2. TECHNICAL ADVANCE The ethanol switch: a tool for tissue-specic gene induction

    E-Print Network [OSTI]

    Murray, J.A.H.

    TECHNICAL ADVANCE The ethanol switch: a tool for tissue-speci®c gene induction during plant is a powerful tool for the analysis of gene function during plant development. Here, we report ethanol inducible of an ethanol-regulated transcription factor, ALCR, is restricted to precise domains using speci®c promoters

  3. Intrusion detection sensor testing tools

    SciTech Connect (OSTI)

    Hayward, D.R.

    1994-08-01T23:59:59.000Z

    Intrusion detection sensors must be frequently tested to verify that they are operational, and they must be periodically tested to verify that they are functioning at required performance levels. Concerns involving this testing can include: The significant amount of manpower required, inconsistent results due to variability in methods and personnel, exposure of personnel to hazardous environments, and difficulty in obtaining access to the areas containing some of the intrusion sensors. To address these concerns, the Department of Energy directed Sandia National Labs. to develop intrusion detection sensor testing tools. Over the past two years Sandia has developed several sensor testing tool prototypes. This paper describes the evolution of an exterior intrusion detection sensor tester and automatic data logger, and also describes various interior intrusion detection sensor test fixtures that can be remotely activated to simulate an intruder.

  4. A new well surveying tool

    E-Print Network [OSTI]

    Haghighi, Manuchehr Mehdizabeh

    1966-01-01T23:59:59.000Z

    A NEW WELL SURVEYING TOOL A Thesis By MANUCHEHR MEHDIZABEH HAGHIGHI Submitted to the Graduate College of the Texas ANM University in partial fulfillment of the requirements for the degree of MASTER OF SCIENCE Major Subject: PETROLEUM... by Surveying Device for S and 19 , N and 41 . 21 3. Comparison of Measured Angles and Angles Indicated by Surveying Device for NE snd 9 , W and 45 . . . . . . . ~ 22 ABSTRNl T Ever since the advent of rotary drilling the petroleum industry has been...

  5. Terascale Simulation Tools and Technologies

    SciTech Connect (OSTI)

    Li, Xiaolin

    2007-03-09T23:59:59.000Z

    We report the development of front tracking method as a simulation tool and technology for the computation on several important SciDAC and SciDAC associated applications. The progress includes the extraction of an independent software library from the front tracking code, conservative front tracking, applications of front tracking to the simulation of fusion pellet injection in a magnetically confined plasma, the study of a fuel injection jet, and the study of fluid chaotic mixing, among other problems.

  6. Top Solar Tools: What are they and how do they help policymakers?

    Broader source: Energy.gov [DOE]

    As part of a Do-It-Yourself Solar Analysis summer series, NREL's Solar Technical Assistance Team (STAT) is presenting a live webinar titled, "Top Solar Tools: What are they and how do they help policymakers?"

  7. Haddad, T., Wright, D., Dailey, M., Klarin, P., Dana, R., Marra, J., and Revell, D., in press. The tools of the Oregon Coastal Atlas, in Wright, D.J. and Scholz, A.J. (eds.), Place Matters--Geospatial Tools for Marine Science, Conservation, and Management

    E-Print Network [OSTI]

    Wright, Dawn Jeannine

    . The tools of the Oregon Coastal Atlas, in Wright, D.J. and Scholz, A.J. (eds.), Place Matters--Geospatial geospatial analysis tools, and direct download access to an array of natural resource data sets relating for viewing data, some that are used for geospatial analysis; and tools for a diverse audience­ some best

  8. Material feedback in digital design tools

    E-Print Network [OSTI]

    Stanton, Christian J

    2009-01-01T23:59:59.000Z

    How do design tools feedback material behavior to the designer? Digital design tools in use by designers today provide a rich environment for design of form but offer little feedback of the material that ultimately realize ...

  9. Remixing physical objects through tangible tools

    E-Print Network [OSTI]

    Follmer, Sean (Sean Weston)

    2011-01-01T23:59:59.000Z

    In this document we present new tools for remixing physical objects. These tools allow users to copy, edit and manipulate the properties of one or more objects to create a new physical object. We already have these ...

  10. D&D and Risk Assessment Tools

    Broader source: Energy.gov [DOE]

    ORISE and PNNL both developed tools to assist in the risk assessment and planning of D&D activities. PNNL developed a Risk D&D tool, a rapid prototype computerbased model, to evaluate...

  11. Software tools for the graphic designer

    E-Print Network [OSTI]

    Henigan, Nardy

    1983-01-01T23:59:59.000Z

    This thesis describes three packages of programs of interest to the graphic designers: (l) a tool for pointing at objects on the display monitor, (2) a tool for organizing sets of programs into interactive menus, and (3) ...

  12. A Tool for Life Cycle Climate Performance (LCCP) Based Design of Residential Air Source Heat Pumps

    SciTech Connect (OSTI)

    Beshr, Mohamed [University of Maryland, College Park; Aute, Vikrant [University of Maryland, College Park; Abdelaziz, Omar [ORNL; Fricke, Brian A [ORNL; Radermacher, Reinhard [University of Maryland, College Park

    2014-01-01T23:59:59.000Z

    A tool for the design of air source heat pumps (ASHP) based on their life cycle climate performance (LCCP) analysis is presented. The LCCP model includes direct and indirect emissions of the ASHP. The annual energy consumption of the ASHP is determined based on AHRI Standard 210/240. The tool can be used as an evaluation tool when the user inputs the required performance data based on the ASHP type selected. In addition, this tool has system design capability where the user inputs the design parameters of the different components of the heat pump and the tool runs the system simulation software to calculate the performance data. Additional features available in the tool include the capability to perform parametric analysis and sensitivity study on the system. The tool has 14 refrigerants, and 47 cities built-in with the option for the user to add more refrigerants, based on NIST REFPROP, and cities, using TMY-3 database. The underlying LCCP calculation framework is open source and can be easily customized for various applications. The tool can be used with any system simulation software, load calculation tool, and weather and emissions data type.

  13. Decision Support:Decision Support: Decision AnalysisDecision Analysis

    E-Print Network [OSTI]

    Bohanec, Marko

    -Making under Risk · Expected Value · Sensitivity Analysis Decision Analysis Decision Analysis: Applied Decision Decision-Making Process Source: Decision Analysis ­ A Tool to Deal with Uncertainty, http Succeed Fail Decision Trees OR/MS · Multi-Criteria Optimisation · Risk Analysis and Simulation · Bayesian

  14. Better Buildings Neighborhood Program Decision Tool

    Broader source: Energy.gov [DOE]

    Provides an overview of the development of the Better Buildings Neighborhood Program decision tool, purpose, and scope.

  15. Marketing & Driving Demand Collaborative - Social Media Tools...

    Energy Savers [EERE]

    drivingdemandsocialmedia010611.pdf More Documents & Publications Marketing & Driving Demand: Social Media Tools & Strategies - January 16, 2011 Social Media for Natural...

  16. Development of a HT Seismic Tool

    Broader source: Energy.gov [DOE]

    The program objective is to design; fabricate and field test two high temperature (HT) seismic tools in an EGS application.

  17. Cooperative Testing and Analysis

    E-Print Network [OSTI]

    Xie, Tao

    Cooperative Testing and Analysis: Tao Xie Peking University, China (2011-2012) North Carolina State Account for even half the total cost of software development [Beizer 90] Automated testing reduces manual to the user to get her help? Tool Human How does the user help the tool based on the info? Iterations

  18. Nuclear Tools For Oilfield Logging-While-Drilling Applications

    SciTech Connect (OSTI)

    Reijonen, Jani [Schlumberger PTC, 20 Wallace Rd., Princeton Junction, NJ 08550 (United States)

    2011-06-01T23:59:59.000Z

    Schlumberger is an international oilfield service company with nearly 80,000 employees of 140 nationalities, operating globally in 80 countries. As a market leader in oilfield services, Schlumberger has developed a suite of technologies to assess the downhole environment, including, among others, electromagnetic, seismic, chemical, and nuclear measurements. In the past 10 years there has been a radical shift in the oilfield service industry from traditional wireline measurements to logging-while-drilling (LWD) analysis. For LWD measurements, the analysis is performed and the instruments are operated while the borehole is being drilled. The high temperature, high shock, and extreme vibration environment of LWD imposes stringent requirements for the devices used in these applications. This has a significant impact on the design of the components and subcomponents of a downhole tool. Another significant change in the past few years for nuclear-based oilwell logging tools is the desire to replace the sealed radioisotope sources with active, electronic ones. These active radiation sources provide great benefits compared to the isotopic sources, ranging from handling and safety to nonproliferation and well contamination issues. The challenge is to develop electronic generators that have a high degree of reliability for the entire lifetime of a downhole tool. LWD tool testing and operations are highlighted with particular emphasis on electronic radiation sources and nuclear detectors for the downhole environment.

  19. Boosted top: experimental tools overview

    E-Print Network [OSTI]

    Emanuele Usai; for the ATLAS; CMS Collaborations

    2015-01-05T23:59:59.000Z

    An overview of tools and methods for the reconstruction of high-boost top quark decays at the LHC is given in this report. The focus is on hadronic decays, in particular an overview of the current status of top quark taggers in physics analyses is presented. The most widely used jet substructure techniques, normally used in combination with top quark taggers, are reviewed. Special techniques to treat pileup in large cone jets are described, along with a comparison of the performance of several boosted top quark reconstruction techniques.

  20. The Xygra gun simulation tool.

    SciTech Connect (OSTI)

    Garasi, Christopher Joseph; Lamppa, Derek C.; Aubuchon, Matthew S.; Shirley, David Noyes; Robinson, Allen Conrad; Russo, Thomas V.

    2008-12-01T23:59:59.000Z

    Inductive electromagnetic launchers, or coilguns, use discrete solenoidal coils to accelerate a coaxial conductive armature. To date, Sandia has been using an internally developed code, SLINGSHOT, as a point-mass lumped circuit element simulation tool for modeling coilgun behavior for design and verification purposes. This code has shortcomings in terms of accurately modeling gun performance under stressful electromagnetic propulsion environments. To correct for these limitations, it was decided to attempt to closely couple two Sandia simulation codes, Xyce and ALEGRA, to develop a more rigorous simulation capability for demanding launch applications. This report summarizes the modifications made to each respective code and the path forward to completing interfacing between them.

  1. Sandia Energy - Models & Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOnItemResearch > TheNuclear PressLaboratory Fellows Jerry SimmonsModels & Tools

  2. Alternative Fuels Data Center: Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOnItem NotEnergy,ARMForms About BecomeTechnologies |HydrogenPublicationsStateTools to

  3. Tool | OpenEI Community

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnualProperty Edit withTianlin Baxin Hydropower Station Jump to:TiogaTongdaoTool Home Graham7781's

  4. ROOT CAUSE ANALYSIS PROGRAM MANUAL

    E-Print Network [OSTI]

    Gravois, Melanie C.

    2007-01-01T23:59:59.000Z

    It provides a systematic accident analysis tool to aid inanalysis is valuable in understanding the accident and theAccident or Incident Table 4.2 Method Barrier Analysis When

  5. Puerto Rico Disaster Decision Support Tool

    E-Print Network [OSTI]

    Firestone, Jeremy

    Puerto Rico Disaster Decision Support Tool: An innovative step towards community resilience Support Tool Pilot Internet-based scalable mapping server Emergency management geo-referenced information for all municipalities in Puerto Rico #12;Disaster Decision Support Tool (DDST) What is a GIS

  6. Reporting Tools Course ID: FMS121

    E-Print Network [OSTI]

    Shull, Kenneth R.

    Reporting Tools Course ID: FMS121 PS Query 03/31/2009 © 2009 Northwestern University FMS121 0 Introduction to Query For Query Developers Query is an ad-hoc reporting tool that allows you to retrieve data will have access to both query viewer and query manager pages. #12;Reporting Tools Course ID: FMS121 PS

  7. Reporting Tools Course ID: FMS121

    E-Print Network [OSTI]

    Shull, Kenneth R.

    Reporting Tools Course ID: FMS121 PS Query 03/31/2009 © 2009 Northwestern University FMS121 0 Introduction to Query For Query Viewers Query is an ad-hoc reporting tool that allows you to retrieve data will have access to both query viewer and query manager pages. #12;Reporting Tools Course ID: FMS121 PS

  8. Commercial Motor Vehicle Brake Assessment Tools

    E-Print Network [OSTI]

    Commercial Motor Vehicle Brake Assessment Tools Commercial Motor Vehicle Roadside Technology to deceleration in g's ­ Passing score: BE43.5 · Enforcement tool for only 3 years. · Based solely on brake Brake Research · CMVRTC research built on these enforcement tools ­ Correlation Study ­ Level-1 / PBBT

  9. Briefing Topic: Geologic Tools for the Moon

    E-Print Network [OSTI]

    Rathbun, Julie A.

    Briefing Topic: Geologic Tools for the Moon Review of Apollo David A. Kring 29 December 2009 #12 Apollo Lunar Sample Return Container 55 Small Tool Carrier 58 Large Tool Carrier 62 Crew Training on Apollo · Apollo 11 and 12 · 860 g (1.9 lb) · 41 cm hammer length · 16 cm head length · Apollo 14, 15, 16

  10. Development of an Automated Security Risk Assessment Methodology Tool for Critical Infrastructures.

    SciTech Connect (OSTI)

    Jaeger, Calvin D.; Roehrig, Nathaniel S.; Torres, Teresa M.

    2008-12-01T23:59:59.000Z

    This document presents the security automated Risk Assessment Methodology (RAM) prototype tool developed by Sandia National Laboratories (SNL). This work leverages SNL's capabilities and skills in security risk analysis and the development of vulnerability assessment/risk assessment methodologies to develop an automated prototype security RAM tool for critical infrastructures (RAM-CITM). The prototype automated RAM tool provides a user-friendly, systematic, and comprehensive risk-based tool to assist CI sector and security professionals in assessing and managing security risk from malevolent threats. The current tool is structured on the basic RAM framework developed by SNL. It is envisioned that this prototype tool will be adapted to meet the requirements of different CI sectors and thereby provide additional capabilities.

  11. Validating the Melusine Gamma Spectroscopy Tool

    SciTech Connect (OSTI)

    Erikson, Luke E.; Keillor, Martin E.; Stavenger, Timothy J.

    2013-11-26T23:59:59.000Z

    This technical report describes testing to evaluate the gamma spectroscopy tool, Melusine, under development by Pacific Northwest National Laboratory. The goal was to verify that the software can successfully be used to provide accurate results and statistical uncertainties for the detection of isotopes of interest and their activities. Of special interest were spectra similar to those produced by radionuclide stations that contribute to the Comprehensive Nuclear Test Ban Treaty Organization’s International Monitoring System. Two data sets were used to test Melusine’s capabilities. The first was the result of a multi-lab calibration effort based on neutron activations produced at the University of California at Davis. The second was taken from the Proficiency Test Exercises conducted by the CTBTO directly in 2005. In 37 of 42 cases, Melusine produced results in agreement with the best answer presently available, in most cases with calculated uncertainties comparable to or better than competing analyses. In fact, Melusine technically provided one more result than CTBTO’s PTE analyses that agreed with the “book answer” (Monte Carlo simulation). Despite these promising results, the Melusine software is still under development. Effort is especially needed to simplify its analysis process, improve stability, and provide user documentation. Some significant analysis tasks require further vetting, such as those to address summing effects. However, our test results indicate that Melusine’s calculations as presently implemented are sound and can be used to reliably analyze spectra from the CTBTO’s radionuclide stations.

  12. Commissioning tools for life-cycle building performance assurance

    SciTech Connect (OSTI)

    Piette, M.A. [Lawrence Berkeley National Lab., CA (United States). Energy and Environment Div.

    1996-05-01T23:59:59.000Z

    This paper discusses information systems for building life-cycle performance analysis and the use of computer-based commissioning tools within this context. There are many reasons why buildings do not perform in practice as well as intended at the design stage. One reason is the lack of commissioning. A second reason is that design intent is not well documented, and performance targets for building components and systems are not well specified. Thus, criteria for defining verification and functional tests is unclear. A third reason is that critical information is often lost throughout the building life-cycle, which causes problems such as misunderstanding of operational characteristics and sequences and reduced overall performance. The life-cycle building performance analysis tools project discussed in this paper are focused on chillers and cooling systems.

  13. Verification and Validation Strategy for LWRS Tools

    SciTech Connect (OSTI)

    Carl M. Stoots; Richard R. Schultz; Hans D. Gougar; Thomas K Larson; Michael Corradini; Laura Swiler; David Pointer; Jess Gehin

    2012-09-01T23:59:59.000Z

    One intension of the Department of Energy (DOE) Light Water Reactor Sustainability (LWRS) program is to create advanced computational tools for safety assessment that enable more accurate representation of a nuclear power plant safety margin. These tools are to be used to study the unique issues posed by lifetime extension and relicensing of the existing operating fleet of nuclear power plants well beyond their first license extension period. The extent to which new computational models / codes such as RELAP-7 can be used for reactor licensing / relicensing activities depends mainly upon the thoroughness with which they have been verified and validated (V&V). This document outlines the LWRS program strategy by which RELAP-7 code V&V planning is to be accomplished. From the perspective of developing and applying thermal-hydraulic and reactivity-specific models to reactor systems, the US Nuclear Regulatory Commission (NRC) Regulatory Guide 1.203 gives key guidance to numeric model developers and those tasked with the validation of numeric models. By creating Regulatory Guide 1.203 the NRC defined a framework for development, assessment, and approval of transient and accident analysis methods. As a result, this methodology is very relevant and is recommended as the path forward for RELAP-7 V&V. However, the unique issues posed by lifetime extension will require considerations in addition to those addressed in Regulatory Guide 1.203. Some of these include prioritization of which plants / designs should be studied first, coupling modern supporting experiments to the stringent needs of new high fidelity models / codes, and scaling of aging effects.

  14. Method for machining steel with diamond tools

    DOE Patents [OSTI]

    Casstevens, J.M.

    1984-01-01T23:59:59.000Z

    The present invention is directed to a method for machine optical quality finishes and contour accuracies of workpieces of carbon-containing metals such as steel with diamond tooling. The wear rate of the diamond tooling is significantly reduced by saturating the atmosphere at the interface of the workpiece and the diamond tool with a gaseous hydrocarbon during the machining operation. The presence of the gaseous hydrocarbon effectively eliminates the deterioration of the diamond tool by inhibiting or preventing the conversion of the diamond carbon to graphite carbon at the point of contact between the cutting tool and the workpiece.

  15. Method for machining steel with diamond tools

    DOE Patents [OSTI]

    Casstevens, John M. (Greenville, TX)

    1986-01-01T23:59:59.000Z

    The present invention is directed to a method for machining optical quality inishes and contour accuracies of workpieces of carbon-containing metals such as steel with diamond tooling. The wear rate of the diamond tooling is significantly reduced by saturating the atmosphere at the interface of the workpiece and the diamond tool with a gaseous hydrocarbon during the machining operation. The presence of the gaseous hydrocarbon effectively eliminates the deterioration of the diamond tool by inhibiting or preventing the conversion of the diamond carbon to graphite carbon at the point of contact between the cutting tool and the workpiece.

  16. Corporate Analysis of DOE Safety Performance

    Broader source: Energy.gov [DOE]

    The Office of Environment, Health, Safety and Security (EHSS), Office of Analysis develops analysis tools and performance dashboards, and conducts analysis of DOE safety performance corporately and on a variety of specific environment, safety and health topics.

  17. A tool for phase resolved spectroscopy with ISGRI

    E-Print Network [OSTI]

    A. Segreto; C. Ferrigno

    2007-09-26T23:59:59.000Z

    INTEGRAL observations provide a large amount of data on accreting binary systems. The interpretation of the spectral emission of these sources needs timing analysis and phase resolved spectroscopy, which are really cumbersome tasks if performed with tools based on the imaging extraction methods usually used for coded mask instruments. Here we present a software for the ISGRI instrument which allows to extract in a fast way, light curves, pulse profiles, and phase resolved spectra, making data reduction a much easier task.

  18. NAQSAT National Air Quality Site Assessment Tool NAQSAT National Air Quality Site Assessment Tool

    E-Print Network [OSTI]

    NAQSAT National Air Quality Site Assessment Tool NAQSAT National Air Quality Site Assessment Tool Air Quality Assessment Tool For Livestock Producers & Advisors #12;NAQSAT The National Air Quality Site Assessment Tool (NAQSAT) was developed for livestock producers and their advisors interested

  19. Your FAFSA and the IRS Data Retrieval Tool What is the IRS Data Retrieval Tool?

    E-Print Network [OSTI]

    Moore, Paul A.

    Your FAFSA and the IRS Data Retrieval Tool What is the IRS Data Retrieval Tool? The U.S. Department of Education and the Internal Revenue Service (IRS) have collaborated to develop a tool that simplifies the completion of the FAFSA application. The IRS Data Retrieval tool allows FAFSA applicants and parents

  20. Process for selecting engineering tools : applied to selecting a SysML tool.

    SciTech Connect (OSTI)

    De Spain, Mark J.; Post, Debra S. (Sandia National Laboratories, Livermore, CA); Taylor, Jeffrey L.; De Jong, Kent

    2011-02-01T23:59:59.000Z

    Process for Selecting Engineering Tools outlines the process and tools used to select a SysML (Systems Modeling Language) tool. The process is general in nature and users could use the process to select most engineering tools and software applications.

  1. A Smart Home Simulation Tool The Development of a Simulation Tool for Measuring

    E-Print Network [OSTI]

    A Smart Home Simulation Tool The Development of a Simulation Tool for Measuring the Impact of a Smart Grid on a Private Home Michael Nysteen & Henrik Mynderup Kongens Lyngby 2012 IMM-M.Sc.-2012-117 #12;A Smart Home Simulation Tool The Development of a Simulation Tool for Measuring the Impact

  2. Verification of the coupled fluid/solid transfer in a CASL grid-to-rod-fretting simulation : a technical brief on the analysis of convergence behavior and demonstration of software tools for verification.

    SciTech Connect (OSTI)

    Copps, Kevin D.

    2011-12-01T23:59:59.000Z

    For a CASL grid-to-rod fretting problem, Sandia's Percept software was used in conjunction with the Sierra Mechanics suite to analyze the convergence behavior of the data transfer from a fluid simulation to a solid mechanics simulation. An analytic function, with properties relatively close to numerically computed fluid approximations, was chosen to represent the pressure solution in the fluid domain. The analytic pressure was interpolated on a sequence of grids on the fluid domain, and transferred onto a separate sequence of grids in the solid domain. The error in the resulting pressure in the solid domain was measured with respect to the analytic pressure. The error in pressure approached zero as both the fluid and solids meshes were refined. The convergence of the transfer algorithm was limited by whether the source grid resolution was the same or finer than the target grid resolution. In addition, using a feature coverage analysis, we found gaps in the solid mechanics code verification test suite directly relevant to the prototype CASL GTRF simulations.

  3. Building Information Modeling (BIM)-Based Daylighting Simulation and Analysis

    E-Print Network [OSTI]

    Kota, S.; Haberl, J.S.; Clayton, M.; Yan, W.

    tools Radiance and DAYSIM. Keywords: Building Information Modeling, BIM, Daylighting Simulation, Radiance, DAYSIM 1 Introduction Building performance analyses are important aspects of designing sustainable buildings. One of the performance analyses...) with daylighting analysis tools (Radiance and DAYSIM as sample simulation tools, which are widely used to study the daylighting performance of buildings). 2 Literature review 2.1 Daylighting simulation tools Over the years many analysis tools have been...

  4. New airport liquid analysis system undergoes testing at Albuquerque...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    New airport liquid analysis system New airport liquid analysis system undergoes testing at Albuquerque International Sunport A new tool that distinguishes potential-threat liquids...

  5. Improving Surface Analysis Methods for Characterization of Advanced...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    useful information from a variety of different analysis tools. The International Organization for Standardization (ISO) Committee TC 201 on Surface Chemical Analysis and ASTM...

  6. STEP Utility Bill Analysis Report | Department of Energy

    Energy Savers [EERE]

    STEP Utility Bill Analysis Report, from the Tool Kit Framework: Small Town University Energy Program (STEP). G5d STEP Utility Bill Analysis Report.pdf More Documents &...

  7. automated computer analysis: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    tool for the analysis of software quality Zhu, Hong 4 Please do not quote. In press, Handbook of affective computing. New York, NY: Oxford Automated Face Analysis for...

  8. MC&A System Effectiveness Tool (MSET) (Presentation 2)

    SciTech Connect (OSTI)

    Powell, Danny H [ORNL] [ORNL; Elwood Jr, Robert H [ORNL] [ORNL

    2011-01-01T23:59:59.000Z

    MSET is a self-assessment or inspection tool utilizing probabilistic risk assessment (PRA) methodology to calculate the system effectiveness of a nuclear facility's material control and accountability (MC&A) system. MSET analyzes the effectiveness of an MC&A system based on defined performance metrics for MC&A functions defined based on U.S. and international best practices and regulations. MSET analysis is based on performance of the entire MC&A system including defense-in-depth attributes and sensitivity analysis of changes in the system, both positive and negative. MSET analysis considers: accounting; containment; access control; surveillance capabilities of the system; and other interfaces with the physical protection systems that provide detection of an unauthorized action. MSET performs a system effectiveness calculation evaluation against a defined performance metric. MSET uses PRA techniques to analyze the MC&A system. MSET is a tool for evaluating the system effectiveness of MC&A systems during self-assessment or external inspection. MSET has been developed, tested, and benchmarked by the U.S. DOE. In collaboration with the U.S. DOE, Rosatom is developing a Russian version (MSET-R) planned for pilot implementation at select material balance areas in 2011. MSET has been shown to be an effective training and communication tool for MC&A.

  9. Augmented reality building operations tool

    DOE Patents [OSTI]

    Brackney, Larry J.

    2014-09-09T23:59:59.000Z

    A method (700) for providing an augmented reality operations tool to a mobile client (642) positioned in a building (604). The method (700) includes, with a server (660), receiving (720) from the client (642) an augmented reality request for building system equipment (612) managed by an energy management system (EMS) (620). The method (700) includes transmitting (740) a data request for the equipment (612) to the EMS (620) and receiving (750) building management data (634) for the equipment (612). The method (700) includes generating (760) an overlay (656) with an object created based on the building management data (634), which may be sensor data, diagnostic procedures, or the like. The overlay (656) is configured for concurrent display on a display screen (652) of the client (642) with a real-time image of the building equipment (612). The method (700) includes transmitting (770) the overlay (656) to the client (642).

  10. Building America Webinar: Building America Research Tools | Department...

    Energy Savers [EERE]

    Building America Research Tools Building America Webinar: Building America Research Tools This webinar was held on March 18, 2015, and reviewed Building America research tools,...

  11. DEVELOPMENT OF AN INTRA-FACILITY CONTINUING EDUCATION PLANNING TOOL

    E-Print Network [OSTI]

    Maxwell, Bruce D.

    DEVELOPMENT OF AN INTRA-FACILITY CONTINUING EDUCATION PLANNING TOOL by Lori Anne Chovanak EDUCATION PLANNING TOOL............................................................................... 1..................................................................................... 8 Value of the Intra-facility Continuing Education Tool

  12. CLEAN-Technology Roadmapping: Lessons, Experiences and Tools...

    Open Energy Info (EERE)

    Experiences and Tools Webinar Jump to: navigation, search Tool Summary Name: Technology Roadmapping: Lessons, Experiences and Tools Webinar AgencyCompany Organization:...

  13. Lightweight Object Oriented Structure Analysis: Tools for Building Tools to Analyze Molecular Dynamics Simulations

    E-Print Network [OSTI]

    , such as carma/ grcarma. There are nearly 14,000 lines of C code in carma and grcarma, the graphical front. The "actions" module, which contains many analy- sis routines, consists of nearly 20,000 lines of C code units. Actions use a common programming interface via subclassing and the "command" design pattern

  14. Rotary fast tool servo system and methods

    DOE Patents [OSTI]

    Montesanti, Richard C. (Cambridge, MA); Trumper, David L. (Plaistow, NH)

    2007-10-02T23:59:59.000Z

    A high bandwidth rotary fast tool servo provides tool motion in a direction nominally parallel to the surface-normal of a workpiece at the point of contact between the cutting tool and workpiece. Three or more flexure blades having all ends fixed are used to form an axis of rotation for a swing arm that carries a cutting tool at a set radius from the axis of rotation. An actuator rotates a swing arm assembly such that a cutting tool is moved in and away from the lathe-mounted, rotating workpiece in a rapid and controlled manner in order to machine the workpiece. A pair of position sensors provides rotation and position information for a swing arm to a control system. A control system commands and coordinates motion of the fast tool servo with the motion of a spindle, rotating table, cross-feed slide, and in-feed slide of a precision lathe.

  15. Survey of tools for risk assessment of cascading outages

    SciTech Connect (OSTI)

    Papic, Milorad; Bell, Keith; Chen, Yousu; Dobson, Ian; Fonte, Louis; Haq, Enamul; Hines, Paul; Kirschen, Daniel; Luo, Xiaochuan; Miller, Stephen; Samaan, Nader A.; Vaiman, Marianna; Varghese, Matthew; Zhang, Pei

    2011-10-01T23:59:59.000Z

    Abstract-This paper is a result of ongoing activity carried out by Understanding, Prediction, Mitigation and Restoration of Cascading Failures Task Force under IEEE Computer Analytical Methods Subcommittee (CAMS). The task force's previous papers [1, 2] are focused on general aspects of cascading outages such as understanding, prediction, prevention and restoration from cascading failures. This is the second of two new papers, which extend this previous work to summarize the state of the art in cascading failure risk analysis methodologies and modeling tools. The first paper reviews the state of the art in methodologies for performing risk assessment of potential cascading outages [3]. This paper describes the state of the art in cascading failure modeling tools, documenting the view of experts representing utilities, universities and consulting companies. The paper is intended to constitute a valid source of information and references about presently available tools that deal with prediction of cascading failure events. This effort involves reviewing published literature and other documentation from vendors, universities and research institutions. The assessment of cascading outages risk evaluation is in continuous evolution. Investigations to gain even better understanding and identification of cascading events are the subject of several research programs underway aimed at solving the complexity of these events that electrical utilities face today. Assessing the risk of cascading failure events in planning and operation for power transmission systems require adequate mathematical tools/software.

  16. Accelerating Battery Design Using Computer-Aided Engineering Tools: Preprint

    SciTech Connect (OSTI)

    Pesaran, A.; Heon, G. H.; Smith, K.

    2011-01-01T23:59:59.000Z

    Computer-aided engineering (CAE) is a proven pathway, especially in the automotive industry, to improve performance by resolving the relevant physics in complex systems, shortening the product development design cycle, thus reducing cost, and providing an efficient way to evaluate parameters for robust designs. Academic models include the relevant physics details, but neglect engineering complexities. Industry models include the relevant macroscopic geometry and system conditions, but simplify the fundamental physics too much. Most of the CAE battery tools for in-house use are custom model codes and require expert users. There is a need to make these battery modeling and design tools more accessible to end users such as battery developers, pack integrators, and vehicle makers. Developing integrated and physics-based CAE battery tools can reduce the design, build, test, break, re-design, re-build, and re-test cycle and help lower costs. NREL has been involved in developing various models to predict the thermal and electrochemical performance of large-format cells and has used in commercial three-dimensional finite-element analysis and computational fluid dynamics to study battery pack thermal issues. These NREL cell and pack design tools can be integrated to help support the automotive industry and to accelerate battery design.

  17. Life cycle assessment: A stewardship tool

    SciTech Connect (OSTI)

    Not Available

    1992-12-09T23:59:59.000Z

    As the chemical industry searches for tools to practice product stewardship. it is getting more involved in life cycle assessment (LCA) techniques, which examine the full environmental impact of a product or process over its lifetime and identify areas for improvement. The industry views LCA as a component of product stewardship,' says James P. Mieure, Monsanto's product safety director/chemicals group, who is the liaison between the Chemical manufacturers Association's (CMA; Washington) LCA and product stewardship work groups. Product stewardship includes examining energy used and waste produced as key parameters to consider when developing a new product or process or in modifying an existing one, Mieure says, which is part of what an LCA does. The work being done by the LCA group at CMA, cautions Mieure, doesn't lend itself to practical applications. The group hopes to help companies implement LCA when the time is right, he says. The time is not right yet, Mieure adds, mostly because of the slowness with which the impact analysis stage is progressing. Although the LCA concept has been around for more than 20 years, activity in applying it in industry has taken off since 1990.

  18. EERE's State & Local Energy Data Tool

    SciTech Connect (OSTI)

    Shambarger, Erick; DeCesaro, Jennifer

    2014-06-23T23:59:59.000Z

    EERE's State and Local Energy Data (SLED) Tool provides basic energy market information that can help state and local governments plan and implement clean energy projects, including electricity generation; fuel sources and costs; applicable policies, regulations, and financial incentives; and renewable energy resource potential. Watch this video to learn more about the tool and hear testimonials from real users about the benefits of using this tool.

  19. EERE's State & Local Energy Data Tool

    ScienceCinema (OSTI)

    Shambarger, Erick; DeCesaro, Jennifer

    2014-06-26T23:59:59.000Z

    EERE's State and Local Energy Data (SLED) Tool provides basic energy market information that can help state and local governments plan and implement clean energy projects, including electricity generation; fuel sources and costs; applicable policies, regulations, and financial incentives; and renewable energy resource potential. Watch this video to learn more about the tool and hear testimonials from real users about the benefits of using this tool.

  20. Precision replenishable grinding tool and manufacturing process

    DOE Patents [OSTI]

    Makowiecki, Daniel M. (Livermore, CA); Kerns, John A. (Livermore, CA); Blaedel, Kenneth L. (Livermore, CA); Colella, Nicholas J. (Livermore, CA); Davis, Pete J. (Pleasanton, CA); Juntz, Robert S. (Hayward, CA)

    1998-01-01T23:59:59.000Z

    A reusable grinding tool consisting of a replaceable single layer of abrasive particles intimately bonded to a precisely configured tool substrate, and a process for manufacturing the grinding tool. The tool substrate may be ceramic or metal and the abrasive particles are preferably diamond, but may be cubic boron nitride. The manufacturing process involves: coating a configured tool substrate with layers of metals, such as titanium, copper and titanium, by physical vapor deposition (PVD); applying the abrasive particles to the coated surface by a slurry technique; and brazing the abrasive particles to the tool substrate by alloying the metal layers. The precision control of the composition and thickness of the metal layers enables the bonding of a single layer or several layers of micron size abrasive particles to the tool surface. By the incorporation of an easily dissolved metal layer in the composition such allows the removal and replacement of the abrasive particles, thereby providing a process for replenishing a precisely machined grinding tool with fine abrasive particles, thus greatly reducing costs as compared to replacing expensive grinding tools.

  1. Precision replenishable grinding tool and manufacturing process

    DOE Patents [OSTI]

    Makowiecki, D.M.; Kerns, J.A.; Blaedel, K.L.; Colella, N.J.; Davis, P.J.; Juntz, R.S.

    1998-06-09T23:59:59.000Z

    A reusable grinding tool consisting of a replaceable single layer of abrasive particles intimately bonded to a precisely configured tool substrate, and a process for manufacturing the grinding tool are disclosed. The tool substrate may be ceramic or metal and the abrasive particles are preferably diamond, but may be cubic boron nitride. The manufacturing process involves: coating a configured tool substrate with layers of metals, such as titanium, copper and titanium, by physical vapor deposition (PVD); applying the abrasive particles to the coated surface by a slurry technique; and brazing the abrasive particles to the tool substrate by alloying the metal layers. The precision control of the composition and thickness of the metal layers enables the bonding of a single layer or several layers of micron size abrasive particles to the tool surface. By the incorporation of an easily dissolved metal layer in the composition such allows the removal and replacement of the abrasive particles, thereby providing a process for replenishing a precisely machined grinding tool with fine abrasive particles, thus greatly reducing costs as compared to replacing expensive grinding tools. 11 figs.

  2. Cooling airflow design tool for displacement ventilation.

    E-Print Network [OSTI]

    Schiavon, Stefano; Bauman, Fred

    2009-01-01T23:59:59.000Z

    Tool for Displacement Ventilation: User Notes 2|Page 5.air  temperature.   Ventilation effectiveness is equivalent for Displacement  Ventilation (Chen and Glicksman 2003).  

  3. Disposal Systems Evaluations and Tool Development - Engineered...

    Broader source: Energy.gov (indexed) [DOE]

    stability at repository-relevant conditions, thermodynamic database development for cement and clay phases, and THMC coupled phenomena along with the development of tools and...

  4. Cooling load design tool for UFAD systems.

    E-Print Network [OSTI]

    Bauman, Fred; Schiavon, Stefano; Webster, Tom; Lee, Kwang Ho

    2010-01-01T23:59:59.000Z

    De- velopment of a Simplified Cooling Load Design Tool forand C. Benedek. 2007. “Cooling airflow design calculationscalculation method for design cooling loads in underfloor

  5. Tools and Strategies to Data Understanding

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    may be interchangeable. VisualizationAnalyticsVisit Matlab Python tools: Numpy, Scipy, iPython, matplotlib Paraview Mathematica Perl IDL Python TCLTK... Read More peg High...

  6. Understanding teacher beliefs with reflective tools

    E-Print Network [OSTI]

    Karwan, Vanessa Ann

    2009-01-01T23:59:59.000Z

    Reflective Tools by Vanessa Ann Karwan Doctor of EducationLeadership by Vanessa Ann Karwan Committee in charge:Kathleen Cohn Copyright Vanessa Ann Karwan, 2009 All rights

  7. Identify Institutional Change Tools for Sustainability

    Broader source: Energy.gov [DOE]

    After identifying institutional change rules and roles, a Federal agency should identify the tools that create the infrastructural context within which it can achieve its sustainability goals.

  8. Building Energy Optimization Tool (BEopt) Training

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Tool (BEopt) 2 | INNOVATION & INTEGRATION: Transforming the Energy Efficiency Market Buildings.Energy.gov The Home of the Future....Today 3 | INNOVATION & INTEGRATION:...

  9. Science with Virtual Observatory Tools

    E-Print Network [OSTI]

    P. Padovani

    2004-11-12T23:59:59.000Z

    The Virtual Observatory is now mature enough to produce cutting-edge science results. The exploitation of astronomical data beyond classical identification limits with interoperable tools for statistical identification of sources has become a reality. I present the discovery of 68 optically faint, obscured (i.e., type 2) active galactic nuclei (AGN) candidates in the two GOODS fields using the Astrophysical Virtual Observatory (AVO) prototype. Thirty-one of these sources have high estimated X-ray powers (>10^44 erg/s) and therefore qualify as optically obscured quasars, the so-called QSO 2. The number of these objects in the GOODS fields is now 40, an improvement of a factor > 4 when compared to the only 9 such sources previously known. By going ~ 3 magnitudes fainter than previously known type 2 AGN in the GOODS fields the AVO is sampling a region of redshift -- power space much harder to reach with classical methods. I also discuss the AVO move to our next phase, the EURO-VO, and our short-term plans to continue doing science with the Virtual Observatory.

  10. Online tools for sequence retrieval and multivariate statistics in molecular biology

    E-Print Network [OSTI]

    Thioulouse, Jean

    On­line tools for sequence retrieval and multivariate statistics in molecular biology Guy Perrière@biomserv.univ­lyon1.fr Keywords: World­Wide Web; Sequence data banks; Retrieval system; Multivariate analysis; Sequence analysis. * To whom reprint requests should be sent. #12; Abstract We have developed a World

  11. Energy Systems Analysis | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Energy Systems Analysis All stages of energy production have inputs and outputs. Argonne researchers analyze the total production picture and develop tools for members of the...

  12. Full 3D visualization tool-kit for Monte Carlo and deterministic transport codes

    SciTech Connect (OSTI)

    Frambati, S.; Frignani, M. [Ansaldo Nucleare S.p.A., Corso F.M. Perrone 25, 1616 Genova (Italy)

    2012-07-01T23:59:59.000Z

    We propose a package of tools capable of translating the geometric inputs and outputs of many Monte Carlo and deterministic radiation transport codes into open source file formats. These tools are aimed at bridging the gap between trusted, widely-used radiation analysis codes and very powerful, more recent and commonly used visualization software, thus supporting the design process and helping with shielding optimization. Three main lines of development were followed: mesh-based analysis of Monte Carlo codes, mesh-based analysis of deterministic codes and Monte Carlo surface meshing. The developed kit is considered a powerful and cost-effective tool in the computer-aided design for radiation transport code users of the nuclear world, and in particular in the fields of core design and radiation analysis. (authors)

  13. Tool Support for Inspecting the Code Quality of HPC Applications

    SciTech Connect (OSTI)

    Panas, T; Quinlan, D; Vuduc, R

    2007-03-16T23:59:59.000Z

    The nature of HPC application development encourages ad hoc design and implementation, rather than formal requirements analysis and design specification as is typical in software engineering. However, we cannot simply expect HPC developers to adopt formal software engineering processes wholesale, even while there is a need to improve software structure and quality to ensure future maintainability. Therefore, we propose tools that HPC developers can use at their discretion to obtain feedback on the structure and quality of their codes. This feedback would come in the form of code quality metrics and analyses, presented when necessary in intuitive and interactive visualizations. This paper summarizes our implementation of just such a tool, which we apply to a standard HPC benchmark as ''proof-of-concept.''

  14. Advanced Electric Submersible Pump Design Tool for Geothermal Applications

    SciTech Connect (OSTI)

    Xuele Qi; Norman Turnquist; Farshad Ghasripoor

    2012-05-31T23:59:59.000Z

    Electrical Submersible Pumps (ESPs) present higher efficiency, larger production rate, and can be operated in deeper wells than the other geothermal artificial lifting systems. Enhanced Geothermal Systems (EGS) applications recommend lifting 300 C geothermal water at 80kg/s flow rate in a maximum 10-5/8-inch diameter wellbore to improve the cost-effectiveness. In this paper, an advanced ESP design tool comprising a 1D theoretical model and a 3D CFD analysis has been developed to design ESPs for geothermal applications. Design of Experiments was also performed to optimize the geometry and performance. The designed mixed-flow type centrifugal impeller and diffuser exhibit high efficiency and head rise under simulated EGS conditions. The design tool has been validated by comparing the prediction to experimental data of an existing ESP product.

  15. GEOMECHANICAL MODELING AS A RESERVOIR CHARACTERIZATION TOOL

    E-Print Network [OSTI]

    GEOMECHANICAL MODELING AS A RESERVOIR CHARACTERIZATION TOOL AT RULISON FIELD, PICEANCE BASIN _______________ ____________________ Dr. Terence K. Young Department Head Department of Geophysics ii #12;ABSTRACT Geomechanics is a powerful reservoir characterization tool. Geomechanical modeling is used here to understand how the in

  16. Ceramic-bonded abrasive grinding tools

    DOE Patents [OSTI]

    Holcombe, Jr., Cressie E. (Farragut, TN); Gorin, Andrew H. (Knoxville, TN); Seals, Roland D. (Oak Ridge, TN)

    1994-01-01T23:59:59.000Z

    Abrasive grains such as boron carbide, silicon carbide, alumina, diamond, cubic boron nitride, and mullite are combined with a cement primarily comprised of zinc oxide and a reactive liquid setting agent and solidified into abrasive grinding tools. Such grinding tools are particularly suitable for grinding and polishing stone, such as marble and granite.

  17. Ceramic-bonded abrasive grinding tools

    DOE Patents [OSTI]

    Holcombe, C.E. Jr.; Gorin, A.H.; Seals, R.D.

    1994-11-22T23:59:59.000Z

    Abrasive grains such as boron carbide, silicon carbide, alumina, diamond, cubic boron nitride, and mullite are combined with a cement primarily comprised of zinc oxide and a reactive liquid setting agent and solidified into abrasive grinding tools. Such grinding tools are particularly suitable for grinding and polishing stone, such as marble and granite.

  18. Chip breaking system for automated machine tool

    DOE Patents [OSTI]

    Arehart, Theodore A. (Clinton, TN); Carey, Donald O. (Oak Ridge, TN)

    1987-01-01T23:59:59.000Z

    The invention is a rotary selectively directional valve assembly for use in an automated turret lathe for directing a stream of high pressure liquid machining coolant to the interface of a machine tool and workpiece for breaking up ribbon-shaped chips during the formation thereof so as to inhibit scratching or other marring of the machined surfaces by these ribbon-shaped chips. The valve assembly is provided by a manifold arrangement having a plurality of circumferentially spaced apart ports each coupled to a machine tool. The manifold is rotatable with the turret when the turret is positioned for alignment of a machine tool in a machining relationship with the workpiece. The manifold is connected to a non-rotational header having a single passageway therethrough which conveys the high pressure coolant to only the port in the manifold which is in registry with the tool disposed in a working relationship with the workpiece. To position the machine tools the turret is rotated and one of the tools is placed in a material-removing relationship of the workpiece. The passageway in the header and one of the ports in the manifold arrangement are then automatically aligned to supply the machining coolant to the machine tool workpiece interface for breaking up of the chips as well as cooling the tool and workpiece during the machining operation.

  19. Tool to Prioritize Energy Efficiency Investments

    SciTech Connect (OSTI)

    Farese, P.; Gelman, R.; Hendron, R.

    2012-08-01T23:59:59.000Z

    To provide analytic support of the U.S. Department of Energy's Office of the Building Technology Program (BTP), NREL developed a Microsoft Excel-based tool to provide an open and objective comparison of the hundreds of investment opportunities available to BTP. This tool uses established methodologies to evaluate the energy savings and cost of those savings.

  20. Screening Tool for Desiccant Dehumidification Applications

    E-Print Network [OSTI]

    Czachorski, M.; Worek, W. M.

    1998-01-01T23:59:59.000Z

    A state-of-the-art software tool that calculates the benefits of desiccant-based air-treatment equipment is described. The software, a Desiccant Systems Application Screening Tool, is written in the WindowsTM environment to promote user...

  1. New Modeling Tool Analyzes Floating Platform Concepts for Offshore Wind Turbines (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2011-02-01T23:59:59.000Z

    Researchers at the National Renewable Energy Laboratory (NREL) developed a new complex modeling and analysis tool capable of analyzing floating platform concepts for offshore wind turbines. The new modeling tool combines the computational methodologies used to analyze land-based wind turbines with the comprehensive hydrodynamic computer programs developed for offshore oil and gas industries. This new coupled dynamic simulation tool will enable the development of cost-effective offshore technologies capable of harvesting the rich offshore wind resources at water depths that cannot be reached using the current technology.

  2. Knoxville startup Fiveworx licenses ORNL energy analysis tool...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    about resource allocation and marketing of energy efficiency, demand-side management, and demand response programs. Additionally, Fiveworx will use the technology to enhance its...

  3. New Methods and Tools to Perform Safety Analysis within RISMC

    SciTech Connect (OSTI)

    Diego Mandelli; Curtis Smith; Cristian Rabiti; Andrea Alfonsi; Robert Kinoshita; Joshua Cogliati

    2013-11-01T23:59:59.000Z

    The Risk Informed Safety Margins Characterization (RISMC) Pathway uses a systematic approach developed to characterize and quantify safety margins of nuclear power plant structures, systems and components. What differentiates the RISMC approach from traditional probabilistic risk assessment (PRA) is the concept of safety margin. In PRA, a safety metric such as core damage frequency (CDF) is generally estimated using static fault-tree and event-tree models. However, it is not possible to estimate how close we are to physical safety limits (say peak clad temperature) for most accident sequences described in the PRA. In the RISMC approach, what we want to understand is not just the frequency of an event like core damage, but how close we are (or not) to this event and how we might increase our safety margin through margin management strategies in a Dynamic PRA (DPRA) fashion. This paper gives an overview of methods that are currently under development at the Idaho National Laboratory (INL) with the scope of advance the current state of the art of dynamic PRA.

  4. Simple Payback: The Wrong Tool for Energy Project Analysis?

    E-Print Network [OSTI]

    Russell, C.

    2008-01-01T23:59:59.000Z

    will want to know the risk of losing their investment, or at least the risk of failing to invest in more valuable alternatives. Here?s how payback measures can frustrate energy management efforts. The greater the investor?s concern with investment loss..., or paying the cost to avoid it. The energy at-risk concept is depicted here: Figure 1: Energy At-Risk Annual energy use, current application in-place Annual energy use, energy-efficient alternative Energy consumption avoided...

  5. The Jet Energy Profile: A BSM Analysis Tool

    E-Print Network [OSTI]

    Chivukula, R Sekhar; Vignaroli, Natascia

    2015-01-01T23:59:59.000Z

    A new heavy di-jet resonance could be discovered at the 14 TeV LHC. In this talk we present a strategy to reveal the nature of such a particle; in particular to discern whether it is a quark-antiquark (q qbar), quark-gluon (qg), or gluon-gluon (gg) resonance. The strategy is based on the study of the energy profiles of the two leading jets in the di-jet channel. Including statistical uncertainties in the signal and the QCD backgrounds, we show that one can distinguish between gg, qg, and q bar resonances; an evaluation of systematic uncertainties in the measurement of the jet energy profile will require a detailed detector study once sufficient 14 TeV di-jet data is in hand.

  6. The Jet Energy Profile: A BSM Analysis Tool

    E-Print Network [OSTI]

    R. Sekhar Chivukula; Elizabeth H. Simmons; Natascia Vignaroli

    2015-07-23T23:59:59.000Z

    A new heavy di-jet resonance could be discovered at the 14 TeV LHC. In this talk we present a strategy to reveal the nature of such a particle; in particular to discern whether it is a quark-antiquark (q qbar), quark-gluon (qg), or gluon-gluon (gg) resonance. The strategy is based on the study of the energy profiles of the two leading jets in the di-jet channel. Including statistical uncertainties in the signal and the QCD backgrounds, we show that one can distinguish between gg, qg, and q bar resonances; an evaluation of systematic uncertainties in the measurement of the jet energy profile will require a detailed detector study once sufficient 14 TeV di-jet data is in hand.

  7. Retrospective Testing of an Automated Building Commissioning Analysis Tool (ABCAT)

    E-Print Network [OSTI]

    Claridge, D. E.; Lin, G.

    Laboratory Texas A&M University System College Station, Texas 777843-3581 January 2009 2 Disclaimer This report was prepared by the Energy Systems Laboratory (ESL) for the Lawrence Berkeley National Laboratory (LBNL). Neither the ESL... or LBNL or any of their employees, makes any warranty, express or implies or assumes any legal liability or responsibility for the accuracy, completeness or usefulness of any information, apparatus, product, or process disclosed, or represents that its...

  8. NREL: Dynamic Maps, GIS Data, and Analysis Tools - GIS Mailing...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Geothermal and Wind Prospectors Releasing from Beta, Marine & Hydrokinetic (MHK) Atlas, Solar Prospector, GIS Website Updates Third Quarter 2012 Contents: An Estimate of the...

  9. Hybrid Ground Source System Analysis and Tool Development

    Broader source: Energy.gov [DOE]

    Project objectives: 1. Compile filtered hourly data for three monitored hybrid installations. 2.Validate existing HyGCHP model. 3.Refine and enhance the HyGCHP model (usability / capability). 4. Demonstrate impact of actual hybrid installations. 5. Report lessons learned and impacts of HyGSHPs to design/engineering community.

  10. Development of a global facility location analysis tool

    E-Print Network [OSTI]

    Johnson, Briana F

    2008-01-01T23:59:59.000Z

    With an economy and customer base that is global, companies are increasingly expanding outside their home country's borders. Many times this is done to take advantage of lower labor or material rates, to increase proximity ...

  11. Analysis & Tools to Spur Increased Deployment | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    shpmasadawasteheattexas.pdf More Documents & Publications National Certification Standard Geothermal Academy: Focus Center BSU GHP District Heating and Cooling System (Phase I)...

  12. Introducing an Online Cooling Tower Performance Analysis Tool

    E-Print Network [OSTI]

    Muller, M.R.; Muller, M.B.; Rao, P.

    2012-01-01T23:59:59.000Z

    and variable nature of all of the factors that can influence performance; fan speed, wind speed, sump temperature, heat load, ambient temperature, relative humidity, etc. This can be overwhelming for a regular operator resulting in many cooling towers being set...

  13. Application of Simple Approximate System AvailabilityAnalysisTools

    E-Print Network [OSTI]

    Borissova, Daniela

    NPP are presented in this paper. For comparison, values,calculated using other methods are also model of the system is developed by constructing a Markov model of each redundant subsystem and finding

  14. Webinar: Overview of Station Analysis Tools Developed in Support...

    Broader source: Energy.gov (indexed) [DOE]

    Energy Laboratory, respectively, to address key technical and financial barriers to hydrogen fueling infrastructure deployment. HRSAM will help to assess the impact of...

  15. DOE Announces Webinars on Hydrogen Station Analysis Tools and...

    Office of Environmental Management (EM)

    the latest energy efficiency and renewable energy technologies, to training for the clean energy workforce. Webinars are free; however, advanced registration is typically required....

  16. analysis software tools: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    version control systems that track the age, programmer, and purpose of the code, e.g., control ISDN lamps, fix hug in call forwarding; * static analyses, e.g., locations where...

  17. Cash flow analysis: a tool for the dairy farmer 

    E-Print Network [OSTI]

    McMorrough, Mark D

    1985-01-01T23:59:59.000Z

    -of-business altogether. "3 When you combine lower or no price support with the current economic crisis facing agricultural producers, the outlook for the next few years is bleak. The Governor of Minnesota, Rudy Perpick, stated that the current farm situation "ts... included in this bill would reduce milk price supports over the next three years. A second proposal issued by the Office of Management and Budget would completely terminate the dairy price support program. Without any reduction at all in the dairy price...

  18. Field Quality Analysis as a Tool to Monitor Magnet Production

    E-Print Network [OSTI]

    Gupta, R.

    2011-01-01T23:59:59.000Z

    Press Case I Age Difference between Upper and Lower Coils (Days) Figure 4: A correlation plot with a least square fit

  19. Los Alamos creates bioinformatics tool for metagenome analysis

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and our own guts. "Metagenomics is the study of entire microbial communities using genomics, such as when you sequence the DNA of a whole community of organisms at once," said...

  20. An environmental change detection and analysis tool using terrestrial video

    E-Print Network [OSTI]

    Velez, Javier, M. Eng. Massachusetts Institute of Technology

    2006-01-01T23:59:59.000Z

    We developed a prototype system to detect and flag changes between pairs of geo-tagged videos of the same scene with similar camera trajectories. The purpose of the system is to help human video analysts detect threats ...

  1. Cash flow analysis: a tool for the dairy farmer

    E-Print Network [OSTI]

    McMorrough, Mark D

    1985-01-01T23:59:59.000Z

    in the prices that they receive for their outputs. Interest rates, although down slightly from the 1981 peak, are at levels far above those experienced in the sixties and seventies. Even the weather has been an adversary of agriculture. Due to abnormally dry... TOTAL CASK AVAILASI. K Cash Re ulred: Feed Jsn. Feb. Narch April Nsy June July August Sept. October Nov. ec. 101AL 12 13 14 15 16 ly 14 19 20 21 22 23 25 27 2$ 29 30 31 32 33 35 36 37 38 graeding 4 Vet. Ned ~ Supplies...

  2. Water Optimizer Suite: Tools for Decision Support and Policy Analysis

    E-Print Network [OSTI]

    Nebraska-Lincoln, University of

    , irrigation system options, well and pump characteristics and water supply. Irrigation options include center pivot or gravity irrigation systems, well or canal delivery, and systems powered by electricity, diesel irrigation water when water supplies are limited. The Water Optimizer Suite consists of four separate

  3. Comparative genomic analysis as a tool for biologicaldiscovery

    SciTech Connect (OSTI)

    Nobrega, Marcelo A.; Pennacchio, Len A.

    2003-03-30T23:59:59.000Z

    Biology is a discipline rooted in comparisons. Comparative physiology has assembled a detailed catalogue of the biological similarities and differences between species, revealing insights into how life has adapted to fill a wide-range of environmental niches. For example, the oxygen and carbon dioxide carrying capacity of vertebrate has evolved to provide strong advantages for species respiring at sea level, at high elevation or within water. Comparative- anatomy, -biochemistry, -pharmacology, -immunology and -cell biology have provided the fundamental paradigms from which each discipline has grown.

  4. FAILURE PREDICTION AND STRESS ANALYSIS OF MICROCUTTING TOOLS 

    E-Print Network [OSTI]

    Chittipolu, Sujeev

    2010-07-14T23:59:59.000Z

    Miniaturized devices are the key producing next-generation microelectro-mechanical products. The applications extend to many fields that demand high-level tolerances from microproducts and component functional and structural integrity. Silicon...

  5. Sandia National Laboratories: Solar Glare Hazard Analysis Tool

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Biofuels Biofuels Publications Biochemical Conversion Program Lignocellulosic Biomass Microalgae Thermochemical Conversion Sign up for our E-Newsletter Required.gif?3.21 Email...

  6. Duty Cycle Analysis & Tools: Maximizing Vehicle Performance (Presentation)

    SciTech Connect (OSTI)

    Walkowicz, K.

    2009-10-28T23:59:59.000Z

    Shows that the benefits of using hybrid vehicle trucks in fleets depends on the duty cycle, or how the vehicles will be driven (e.g., stop and go) over a particular route (e.g., urban or rural).

  7. Building Performance Database Analysis Tools | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742Energy China U.S. Department ofJune 2,The BigSiding RetrofitforCamberlyDepartmentBPD

  8. Battery Lifetime Analysis and Simulation Tool (BLAST) Documentation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office511041cloth DocumentationProductsAlternativeOperationalAugustDecade5-F,INITIALoperatorBassiBattery

  9. Energy Analysis Models, Tools and Software Technologies Available for

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOnItem NotEnergy,ARMFormsGasRelease Date:researchEmerging ThreatsEmployment

  10. Building America Analysis Methods and Tools Standing Technical Committee

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny: Theof Energy Future of CSP:Brookhaven Teaching FellowsBuilder PartnerAmerica

  11. NREL: Dynamic Maps, GIS Data, and Analysis Tools - Biomass Maps

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC)Integrated CodesTransparency Visit | National Nuclear13Summer 2015 / IssueAbout GIS

  12. NREL: Dynamic Maps, GIS Data, and Analysis Tools - Data Resources

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC)Integrated CodesTransparency Visit | National Nuclear13Summer 2015 / IssueAbout

  13. NREL: Dynamic Maps, GIS Data, and Analysis Tools - Federal Energy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC)Integrated CodesTransparency Visit | National Nuclear13Summer 2015 /Management Program

  14. NREL: Dynamic Maps, GIS Data, and Analysis Tools - Geospatial Team

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC)Integrated CodesTransparency Visit | National Nuclear13Summer 2015 /Management

  15. NREL: Dynamic Maps, GIS Data, and Analysis Tools - Geothermal Maps

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC)Integrated CodesTransparency Visit | National Nuclear13Summer 2015

  16. NREL: Dynamic Maps, GIS Data, and Analysis Tools - Geothermal Prospector

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC)Integrated CodesTransparency Visit | National Nuclear13Summer 2015Geothermal

  17. NREL: Dynamic Maps, GIS Data, and Analysis Tools - Hydrogen Maps

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC)Integrated CodesTransparency Visit | National Nuclear13Summer 2015GeothermalHydrogen

  18. NREL: Dynamic Maps, GIS Data, and Analysis Tools - International Maps

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC)Integrated CodesTransparency Visit | National Nuclear13Summer

  19. NREL: Dynamic Maps, GIS Data, and Analysis Tools - Maps

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC)Integrated CodesTransparency Visit | National Nuclear13SummerBookmark and

  20. NREL: Dynamic Maps, GIS Data, and Analysis Tools - Publications

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC)Integrated CodesTransparency Visit | National Nuclear13SummerBookmark

  1. NREL: Dynamic Maps, GIS Data, and Analysis Tools - Renewable Energy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC)Integrated CodesTransparency Visit | National Nuclear13SummerBookmarkTechnical

  2. NREL: Dynamic Maps, GIS Data, and Analysis Tools - Solar Data

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC)Integrated CodesTransparency Visit | National Nuclear13SummerBookmarkTechnicalSolar

  3. NREL: Dynamic Maps, GIS Data, and Analysis Tools - Webmaster

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC)Integrated CodesTransparency Visit | NationalWebmaster To contact the Webmaster,

  4. NREL: Dynamic Maps, GIS Data, and Analysis Tools - Wind Maps

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC)Integrated CodesTransparency Visit | NationalWebmaster To contact the

  5. NREL: Dynamic Maps, GIS Data, and Analysis Tools Home Page

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC)Integrated CodesTransparency Visit | NationalWebmaster To contact the The Dynamic

  6. Hamiltonian tools for the analysis of optical polarization control

    E-Print Network [OSTI]

    Boyer, Edmond

    with conventional polarizers that unavoidably waste 50% of unpolarized light [1]. By using a photorefractive two unpolarized signal beam, almost without any loss of energy. Along the same way, an arbitrary polarization a "universal polarizer" perform- ing polarization of unpolarized light with 100% efficiency, in contrast

  7. NetViewer: A Network Traffic Visualization and Analysis Tool

    E-Print Network [OSTI]

    Reddy, Narasimha

    . NetViewer can be employed to detect and identify network anomalies such as DoS/DDoS attacks, worms from both the commercial and free soft- ware communities. To study and classify traffic on the network most of the time. In such cases, attack traffic may not induce significant overshoot in traffic volume

  8. Solar Glare Hazard Analysis Tool (SGHAT) - Energy Innovation Portal

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What'sis Taking Over Our Instagram Secretary Moniz9MorganYou areInnovationPriority |GoingSolarForSolar

  9. 2010 Solar Market Transformation Analysis and Tools | Open Energy

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnualProperty Edit withTianlinPapersWindey Wind HometcdbInformationInformation Solar Market

  10. CrayPat Performance Analysis Tool at NERSC

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625govInstrumentstdmadapInactiveVisitingContract Management Fermi Site OfficeCourse Clusters CourseN N O VCray

  11. DOE Announces Webinars on Hydrogen Station Analysis Tools and Interoperable

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 111 1,613PortsmouthBartlesvilleAbout » ContactDepartment of

  12. Darshan I/O Performance Analysis Tool at NERSC

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625govInstrumentstdmadapInactiveVisitingContract Management Fermi SitePARTOfficeOctoberDaniel Wood Dark

  13. New Tool Yields Custom Environmental Data for Lifecycle Analysis |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn'tOrigin of Contamination in Many DevilsForumEngines |New Technology for Hydroprocessing

  14. Novel Tool Allows Quicker, More Versatile Analysis of Energy Production

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn'tOrigin of Contamination in ManyDepartment of Energy NorthB O| DepartmentMEAs | Department

  15. Battery Lifetime Analysis and Simulation Tool (BLAST) Documentation |

    Office of Scientific and Technical Information (OSTI)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOn AprilAElectronic Input Options Garyand TechnicalAbout About

  16. Novel Tool Allows Quicker, More Versatile Analysis of Energy Production

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page onYouTube YouTube Note: Since the.pdfBreaking ofOilNEW HAMPSHIREofNewsletterEnergySeptemberTechnologies | Department

  17. New Mexico: Solar Glare Hazard Analysis Tool Maximizes Energy Production,

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directed offOCHCO2:Introduction toManagement ofConverDynNet-Zero Campus atEnergy NewofSummaryAnnounceWins

  18. NREL: Dynamic Maps, GIS Data, and Analysis Tools - Solar Maps

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOnItemResearch > The EnergyCenterDioxide CaptureSee theOilNREL in the Community

  19. Climate Analysis Indicators Tool (CAIT) | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual Siteof EnergyInnovationin UrbanCity ofCityClean EconomyLLC SmartTracker JumpClimate

  20. Materials Flows through Industry (MFI) Tool Â… AMO Analysis Review

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page onYouTube YouTube Note: Since the.pdfBreaking ofOil & GasTechnical Publications »of EnergyMaterials Flows through