Powered by Deep Web Technologies
Note: This page contains sample records for the topic "analysis continued operation" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Continuity of Operations  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

The notice defines requirements and responsibilities for continuity of operations planning within the DOE to ensure the capability to continue essential Departmental functions across a wide range of all hazard emergencies. Does not cancel other directives.

2005-01-14T23:59:59.000Z

2

Noise analysis of single-qumode Gaussian operations using continuous-variable cluster states  

E-Print Network [OSTI]

We consider measurement-based quantum computation that uses scalable continuous-variable cluster states with a one-dimensional topology. The physical resource, known here as the dual-rail quantum wire, can be generated using temporally multiplexed offline squeezing and linear optics or by using a single optical parametric oscillator. We focus on an important class of quantum gates, specifically Gaussian unitaries that act on single modes, which gives universal quantum computation when supplemented with multi-mode operations and photon-counting measurements. The dual-rail wire supports two routes for applying single-qumode Gaussian unitaries: the first is to use traditional one-dimensional quantum-wire cluster-state measurement protocols. The second takes advantage of the dual-rail quantum wire in order to apply unitaries by measuring pairs of qumodes called macronodes. We analyze and compare these methods in terms of the suitability for implementing single-qumode Gaussian measurement-based quantum computation.

Rafael N. Alexander; Seiji C. Armstrong; Ryuji Ukai; Nicolas C. Menicucci

2014-10-13T23:59:59.000Z

3

LANL continuity of operations plan  

SciTech Connect (OSTI)

The Los Alamos National Laboratory (LANL) is a premier national security research institution, delivering scientific and engineering solutions for the nation's most crucial and complex problems. Our primary responsibility is to ensure the safety, security, and reliability of the nation's nuclear stockpile. LANL emphasizes worker safety, effective operational safeguards and security, and environmental stewardship, outstanding science remains the foundation of work at the Laboratory. In addition to supporting the Laboratory's core national security mission, our work advances bioscience, chemistry, computer science, earth and environmental sciences, materials science, and physics disciplines. To accomplish LANL's mission, we must ensure that the Laboratory EFs continue to be performed during a continuity event, including localized acts of nature, accidents, technological or attack-related emergencies, and pandemic or epidemic events. The LANL Continuity of Operations (COOP) Plan documents the overall LANL COOP Program and provides the operational framework to implement continuity policies, requirements, and responsibilities at LANL, as required by DOE 0 150.1, Continuity Programs, May 2008. LANL must maintain its ability to perform the nation's PMEFs, which are: (1) maintain the safety and security of nuclear materials in the DOE Complex at fixed sites and in transit; (2) respond to a nuclear incident, both domestically and internationally, caused by terrorist activity, natural disaster, or accident, including mobilizing the resources to support these efforts; and (3) support the nation's energy infrastructure. This plan supports Continuity of Operations for Los Alamos National Laboratory (LANL). This plan issues LANL policy as directed by the DOE 0 150.1, Continuity Programs, and provides direction for the orderly continuation of LANL EFs for 30 days of closure or 60 days for a pandemic/epidemic event. Initiation of COOP operations may be required to support an allhazards event, including a national security emergency, major fire, catastrophic natural disaster, man-made disaster, terrorism event, or technological disaster by rendering LANL buildings, infrastructure, or Technical Areas unsafe, temporarily unusable, or inaccessible.

Senutovitch, Diane M [Los Alamos National Laboratory

2010-12-22T23:59:59.000Z

4

Supplement analysis for continued operation of Lawrence Livermore National Laboratory and Sandia National Laboratories, Livermore. Volume 2: Comment response document  

SciTech Connect (OSTI)

The US Department of Energy (DOE), prepared a draft Supplement Analysis (SA) for Continued Operation of Lawrence Livermore National Laboratory (LLNL) and Sandia National Laboratories, Livermore (SNL-L), in accordance with DOE`s requirements for implementation of the National Environmental Policy Act of 1969 (NEPA) (10 Code of Federal Regulations [CFR] Part 1021.314). It considers whether the Final Environmental Impact Statement and Environmental Impact Report for Continued Operation of Lawrence Livermore National Laboratory and Sandia National Laboratories, Livermore (1992 EIS/EIR) should be supplement3ed, whether a new environmental impact statement (EIS) should be prepared, or no further NEPA documentation is required. The SA examines the current project and program plans and proposals for LLNL and SNL-L, operations to identify new or modified projects or operations or new information for the period from 1998 to 2002 that was not considered in the 1992 EIS/EIR. When such changes, modifications, and information are identified, they are examined to determine whether they could be considered substantial or significant in reference to the 1992 proposed action and the 1993 Record of Decision (ROD). DOE released the draft SA to the public to obtain stakeholder comments and to consider those comments in the preparation of the final SA. DOE distributed copies of the draft SA to those who were known to have an interest in LLNL or SNL-L activities in addition to those who requested a copy. In response to comments received, DOE prepared this Comment Response Document.

NONE

1999-03-01T23:59:59.000Z

5

Supplement Analysis to the 1999 Site-Wide Environmental Impact Statement for Continued Operation of Los Alamos National Laboratory for the Proposed Disposition of Certain Large Containment Vessels  

SciTech Connect (OSTI)

This Supplement Analysis (SA) has been prepared to determine if the Site-Wide Environmental Impact Statement for Continued Operations of Los Alamos National Laboratory (SWEIS) (DOE/EIS-0238) (DOE 1999a) adequately addresses the environmental effects of introducing a proposed project for the clean-out and decontamination (DECON) of certain large containment vessels into the Chemistry and Metallurgy Research (CMR) Building located at Los Alamos National Laboratory (LANL) Technical Area (TA) 3, or if the SWEIS needs to be supplemented. After undergoing the clean-out and DECON steps, the subject containment vessels would be disposed of at LANL's TA-54 low-level waste (LLW) disposal site or, as appropriate, at a DOE or commercial offsite permitted LLW-regulated landfill; after actinides were recovered from the DECON solution within the CMR Building, they would be moved to LANL's TA-55 Plutonium Facility and undergo subsequent processing at that facility for reuse. Council on Environmental Quality regulations at Title 40, Section 1502.9(c) of the Code of Federal Regulations (40 CFR 1502.9[c]) require federal agencies to prepare a supplement to an environmental impact statement (EIS) when an agency makes substantial changes in the proposed action that are relevant to environmental concerns, or there are changed circumstances or new or changed information relevant to concerns and bearing on the proposed action or its impacts. This SA is prepared in accordance with Section 10 CFR 10211.314(c) of the DOE's regulations for National Environmental Policy Act (NEPA) implementation that states: ''When it is unclear whether or not an EIS supplement is required, DOE shall prepare a Supplement Analysis''. This SA specifically compares key impact assessment parameters of the proposed project action with the LANL operations capabilities evaluated in the 1999 SWEIS in support DOE's long-term hydrodynamic testing program at LANL, as well as the waste disposal capabilities evaluated in the SWEIS in support of LANL operations. It also provides an explanation of any differences between the proposed action and activities described in the SWEIS analysis. The SWEIS analyzed the impacts of performing plutonium (Pu) and actinide activities, including hydrodynamic testing support activity, at the Plutonium Facility and at the CMR Building.

N /A

2004-02-12T23:59:59.000Z

6

Operations Expenditures: Historical Trends and Continuing Challenges (Presentation)  

SciTech Connect (OSTI)

In this presentation for the American Wind Energy Association 2013 conference, NREL's Eric Lantz examines historical trends and continuing challenges of wind power operating expenses. Lowering such expenses could increase profitability and contribute to lowering the cost of energy.

Lantz, E.

2013-05-01T23:59:59.000Z

7

Supplement Analysis for the Site-Wide Environmental Impact Statement for Continued Operation of Los Alamos National Laboratory -- Proposed Horizontal Expansion of the Restricted Airspace up to 5,000 feet at Los Alamos National Laboratory  

SciTech Connect (OSTI)

This Supplement Analysis (SA) has been prepared to determine if the Site-Wide Environmental Impact Statement for Continued Operations of Los Alamos National Laboratory (SWEIS) (DOE/EIS-0238) adequately addresses the environmental effects of modifying the horizontal restricted airspace boundaries at the Los Alamos National Laboratory (LANL), to include LANL's Technical Areas (TA)-33 and TA-54, or if the SWEIS needs to be supplemented. Council on Environmental Quality regulations at Title 40, Section 1502.9(c) of the Code of Federal Regulations (40 CFR 1502.9[c]) require federal agencies to prepare a supplement to an EIS when an agency makes substantial changes in the Proposed Action that are relevant to Environmental concerns or when there are new circumstances or information relevant to environmental concerns and bearing on the Proposed Action or its impacts. This SA specifically compares key impact assessment parameters of this proposal to the SWEIS impact analysis, and considers LANL operational accident analyses. The Sa concludes with a finding of fact regarding whether the environmental effects of the Proposed Action are adequately bounded by the analyses of impacts projected by the 1999 Site-Wide Environmental Impact Statement for Continued Operation of the Los Alamos National Laboratory, or whether a Supplemental EIS is required.

N /A

2004-09-21T23:59:59.000Z

8

Performance assessment for continuing and future operations at Solid Waste Storage Area 6  

SciTech Connect (OSTI)

This radiological performance assessment for the continued disposal operations at Solid Waste Storage Area 6 (SWSA 6) on the Oak Ridge Reservation (ORR) has been prepared to demonstrate compliance with the requirements of the US DOE. The analysis of SWSA 6 required the use of assumptions to supplement the available site data when the available data were incomplete for the purpose of analysis. Results indicate that SWSA 6 does not presently meet the performance objectives of DOE Order 5820.2A. Changes in operations and continued work on the performance assessment are expected to demonstrate compliance with the performance objectives for continuing operations at the Interim Waste Management Facility (IWMF). All other disposal operations in SWSA 6 are to be discontinued as of January 1, 1994. The disposal units at which disposal operations are discontinued will be subject to CERCLA remediation, which will result in acceptable protection of the public health and safety.

Not Available

1994-02-01T23:59:59.000Z

9

Justification for Continued Operation for Tank 241-Z-361  

SciTech Connect (OSTI)

This justification for continued operations (JCO) summarizes analyses performed to better understand and control the potential hazards associated with Tank 241-2-361. This revision to the JCO has been prepared to identify and control the hazards associated with sampling the tank using techniques developed and approved for use in the Tank Waste Remediation System (TWRS) at Hanford.

BOGEN, D.M.

1999-09-01T23:59:59.000Z

10

Continuous Operation of Foamed Emulsion Bioreactors Treating Toluene Vapors  

E-Print Network [OSTI]

.interscience.wiley.com). DOI: 10.1002/bit.20619 Abstract: Continuous operation of a new bioreactor for air pollution control Periodicals, Inc. Keywords: VOC control; biofilter; air pollution control; toluene; biologically activated biofilters and biotrickling filters for the treatment of air pollutants such as toluene. Ã? 2005 Wiley

11

High level waste facilities -- Continuing operation or orderly shutdown  

SciTech Connect (OSTI)

Two options for Environmental Impact Statement No action alternatives describe operation of the radioactive liquid waste facilities at the Idaho Chemical Processing Plant at the Idaho National Engineering and Environmental Laboratory. The first alternative describes continued operation of all facilities as planned and budgeted through 2020. Institutional control for 100 years would follow shutdown of operational facilities. Alternatively, the facilities would be shut down in an orderly fashion without completing planned activities. The facilities and associated operations are described. Remaining sodium bearing liquid waste will be converted to solid calcine in the New Waste Calcining Facility (NWCF) or will be left in the waste tanks. The calcine solids will be stored in the existing Calcine Solids Storage Facilities (CSSF). Regulatory and cost impacts are discussed.

Decker, L.A.

1998-04-01T23:59:59.000Z

12

Analysis of the BATSE Continuous MER data  

E-Print Network [OSTI]

The CGRO/BATSE database includes many types of data such as the 16-channel continuous background or medium energy resolution burst data (CONT and MER data types). We have calculated some four hundred burst's medium energy resolution spectra and Principal Component Analysis has been applied. We found five components can describe GRBs' spectra.

P. Veres; I. Horvath; L. G. Balazs

2005-10-11T23:59:59.000Z

13

Supplement Analysis for Site-Wide Environmental Impact Statement for Continued Operation of Los Alamos National Laboratory -- Modification of Management Methods for Transuranic Waste Characterization at Los Alamos National Laboratory  

SciTech Connect (OSTI)

This Supplement Analysis (SA) has been prepared to determine if the Site-Wide Environmental Impact Statement for Continued Operations of Los Alamos National Laboratory (SWEIS) (DOE/EIS-0238) adequately addresses the environmental effects of a waste management proposal for installing and operating modular units for the characterization of transuranic (TRU) waste1 at the Los Alamos National Laboratory (LANL) Technical Area (TA)-54, Area G, or if the SWEIS needs to be supplemented. Council on Environmental Quality regulations at Title 40, Section 1502.9 (c) of the Code of Federal Regulations (40 CFR 1502.9[c]) require federal agencies to prepare a supplement to an EIS when an agency makes substantial changes in the proposed action that are relevant to environmental concerns or there are circumstances or information relevant to concerns and bearing on the proposed action or its impacts. This SA is prepared in accordance with Section 10 CFR 1021.314(c) of the Department of Energy's (DOE's) regulations for NEPA implementation stating that ''When it is unclear whether or not an EIS supplement is required, DOE shall prepare a Supplement Analysis.'' This SA specifically compares key impact assessment parameters of the waste management program evaluated in the SWEIS with those of a proposal that would change the approach of a portion of this management program. It also provides an explanation of any differences between the proposed action and activities described in the previous SWEIS analysis. DOE proposes to expedite the shipment of legacy TRU waste to the Waste Isolation Pilot Plant (WIPP) in Carlsbad, New Mexico. The Cerro Grande Fire in 2000 and events of September 11, 2001, have focused attention on the potential risk to the public and the credible security hazard posed by the amount of plutonium stored above ground at LANL and the increased necessity to safeguard our nation's nuclear waste. The safest place for defense-generated TRU waste has been determined to be DOE's permitted repository for TRU waste 2100 feet underground at WIPP. The proposed accelerated plan to dispose of TRU waste at WIPP would result in the complete disposition of LANL legacy TRU waste by 2010; this accelerated disposition would be 20 years ahead of schedule, at a savings of $500 million in life-cycle costs and result in 3,000 fewer shipments to WIPP. However, the current individual small facilities at LANL lack the buildings, equipment, and trained personnel to conduct efficient characterization activities on an increased scale. Installing new modular structures and equipment close to the drum storage location at TA-54 in housings designed for a large inventory and high throughput would support DOE's expedited shipment program by increasing the repackaging rate, and it would also decrease on-site transportation vulnerabilities.

N /A

2002-08-13T23:59:59.000Z

14

Modal Analysis of Continuous Structrual System with Tapered Cantilevered Members  

E-Print Network [OSTI]

OF CONVENTIONAL CONTINUOUS SYSTEM ............ 9 2.1. Transverse Vibration in Conventional Continuous System Model .................... 9 2.2. Equation of Motion for Flexural Member .......................................................... 9 2.3 Boundary.......................................... 19 2.6 Conclusion ........................................................................................................ 20 3. MODAL ANALYSIS OF DISCRETIZED CONTINUOUS SYSTEM ............... 21 3.1. Transverse Vibration in Discretized Continuous...

Kim, Yoon Mo

2012-02-14T23:59:59.000Z

15

On the continuity of spectra for families of magnetic pseudodifferential operators  

SciTech Connect (OSTI)

For families of magnetic pseudodifferential operators defined by symbols and magnetic fields depending continuously on a real parameter {epsilon}, we show that the corresponding family of spectra also varies continuously with {epsilon}.

Athmouni, Nassim [Faculte des Sciences de l'Universite de Sfax, Route de la Soukra km 4-B.P. n 802-3038, Sfax (Tunisia); Mantoiu, Marius [Departamento de Matematicas, Universidad de Chile, Las Palmeras 3425, Casilla 653, Santiago (Chile); Purice, Radu [Institute of Mathematics Simion Stoilow of the Romanian Academy, P.O. Box 1-764, Bucharest RO-014700 (Romania)

2010-08-15T23:59:59.000Z

16

EIS-0225: Continued Operation of the Pantex Plant and Associated Storage of Nuclear Weapon Components  

Broader source: Energy.gov [DOE]

This EIS evaluates the potential environemental impact of a proposal to continue operation of the Pantex Plant and associated storage of nuclear weapon components. Alternatives considered include: ...

17

EIS-0380: Site-Wide Environmental Impact Statement for Continued Operation of the Los Alamos National Laboratory, New Mexico  

Broader source: Energy.gov [DOE]

This Site-Wide EIS evaluates the continued operation of the Los Alamos National Laboratory (LANL). NNSA identified and assessed three alternatives for continued operation of LANL: (1) No Action, (2) Reduced Operations, and (3) Expanded Operations.

18

Nonlinearity and noise modeling of operational transconductance amplifiers for continuous time analog filters  

E-Print Network [OSTI]

A general framework for performance optimization of continuous-time OTA-C (Operational Transconductance Amplifier-Capacitor) filters is proposed. Efficient procedures for evaluating nonlinear distortion and noise valid for any filter of arbitrary...

Ramachandran, Arun

2006-08-16T23:59:59.000Z

19

EIS-0348: Continued Operation of Lawrence Livermore National Laboratory and Supplement Stockpile Stewardship and Management  

Broader source: Energy.gov [DOE]

This EIS analyzes DOE's decision to continue operation of Lawrence Livermore National Laboratory (LLNL) is critical to National Nuclear Security Administration’s Stockpile Stewardship Program and to preventing the spread and use of nuclear weapons worldwide.

20

EIS-0238: Continued Operation of the Los Alamos National Laboratory, Los Alamos, New Mexico  

Broader source: Energy.gov [DOE]

This EIS evaluates the potential environmental impacts of a proposal to continue operating the Los Alamos National Laboratory (LANL) located in Los Alamos County, in north-central New Mexico. DOE...

Note: This page contains sample records for the topic "analysis continued operation" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

An operational analysis of flashing traffic signal operation  

E-Print Network [OSTI]

AN OPERATIONAL ANALYSIS OF FLASHING TRAFFIC SIGNAL OPERATION A Thesis by ROBERT JOSEPH BENZ Submitted to the Office of Graduate Studies of Texas AEcM University in partial fulfillment of the requirements for the degree of MASTER OF SCIENCE... street volumes are below 250 vph per approach and for main street volume of 500 vph per approach when the main/minor street volume ratio is above two. The volume range exceeds the Warrant 1 the minimum volume warrant for traffic signal installation...

Benz, Robert Joseph

1993-01-01T23:59:59.000Z

22

Employee Job Task Analysis (EJTA) PIA, Richland Operations Office...  

Office of Environmental Management (EM)

Job Task Analysis (EJTA) PIA, Richland Operations Office Employee Job Task Analysis (EJTA) PIA, Richland Operations Office Employee Job Task Analysis (EJTA) PIA, Richland...

23

Reservoir analysis model for battlefield operations  

E-Print Network [OSTI]

RESERVOIR ANALYSIS MODEL FOR BATTLEFIELD OPERATIONS A Thesis by GARRETT JAMES SULLIVAN Submitted to the Graduate College of Texas A&M University in partial fulfillment of the requirements for the degree of MASTER OF SCIENCE December 1988... Major Subject: Civil Engineering RESERVOIR ANALYSIS MODEL FOR BATTLEFIELD OPERATIONS A Thesis by GARRETT JAMES SULLIVAN Approved as to style and content by: Ralp A. Wurbs (Chair of Committee) mes (N er) neth tr ek Nem e Charles . a es...

Sullivan, Garrett James

1988-01-01T23:59:59.000Z

24

Performance assessment for continuing and future operations at solid waste storage area 6  

SciTech Connect (OSTI)

This revised performance assessment (PA) for the continued disposal operations at Solid Waste Storage Area (SWSA) 6 on the Oak Ridge Reservation (ORR) has been prepared to demonstrate compliance with the performance objectives for low-level radioactive waste (LLW) disposal contained in the US Department of Energy (DOE) Order 5820.2A. This revised PA considers disposal operations conducted from September 26, 1988, through the projects lifetime of the disposal facility.

NONE

1997-09-01T23:59:59.000Z

25

EIS-0157: Site-wide for Continued Operation of Lawrence Livermore/Sandia National Laboratory, Livermore  

Broader source: Energy.gov [DOE]

The Department of Energy prepared this environmental impact statement to analyze the potential environmental impacts of the continued operation of Lawrence Livermore National Laboratory and Sandia National Laboratory - Livermore, including programmatic enhancements and facility modifications to occur over the subsequent 10-year term that are pursuant to research and development missions established for the Laboratories by Congress and the President.

26

Development of a hybrid margin angle controller for HVDC continuous operation  

SciTech Connect (OSTI)

The objective of this paper is to present a new hybrid margin angle control method for HVDC continuous operation under AC system fault conditions. For stable continuous operation of HVDC systems, the margin angle controller must be designed to maintain the necessary margin angle to avoid commutation failures. The proposed method uses the open loop margin angle controller (MAC) as the basic controller, and adds output from the closed loop MAC to correct the control angle. A fast voltage detection algorithm is used for open loop control, and margin angle reference correction using harmonics detection for closed loop control are also developed. The combination of open and closed loop control provides quick responses when faults occur with stable and speedy recovery after fault clearance. The effectiveness of the developed controller is confirmed through EMTP digital simulations and also with the experiments using an analogue simulator.

Sato, M. [Kansai Electric Power Co., Osaka (Japan)] [Kansai Electric Power Co., Osaka (Japan); Yamaji, K. [Shikoku Electric Power Co., Takamatsu (Japan)] [Shikoku Electric Power Co., Takamatsu (Japan); Sekita, M. [Electric Power Development Co., Tokyo (Japan)] [Electric Power Development Co., Tokyo (Japan); Amano, M.; Nishimura, M.; Konishi, H.; Oomori, T. [Hitachi, Ltd. (Japan)] [Hitachi, Ltd. (Japan)

1996-11-01T23:59:59.000Z

27

Mitigation Monitoring and Reporting Program for continued operation of Lawrence Livermore National Laboratory  

SciTech Connect (OSTI)

A Mitigation Monitoring and Reporting Program, required by the California Environmental Quality Act, was developed by UC as part of the Final EIS/EIR process. This document describing the program is a companion to the Final Environmental Impact Statement/Environmental Impact Report (EIS/EIR) for the Continued Operation of Lawrence Livermore National Laboratory (LLNL) and Sandia National Laboratories, Livermore (SNL, Livermore). The Final EIS/EIR analyzes the potential environmental impacts of the proposed action, which for the purposes of NEPA is: continued operation, including near-term (within 5 to 1 0 years) proposed projects, of LLNL and SNL, Livermore. The proposed action for the EIR is the renewal of the contract between DOE and UC for UC`s continued operation and management of LLNL. The Mitigation Monitoring and Reporting Program is for implementing and monitoring progress of measures taken to mitigate the significant impacts of the proposed action. A complete description of the impacts and proposed mitigations is in Section 5 of Volume I of the Final EIS/EIR. This report summarizes the mitigation measures, identifies the responsible party at the Laboratory for implementing the mitigation measure, states when monitoring will be implemented, when the mitigation measure will be in place and monitoring completed, and who will verify that the mitigation measure was implemented.

Not Available

1992-08-01T23:59:59.000Z

28

Operator Analysis of Neutrinoless Double Beta Decay  

E-Print Network [OSTI]

We study the effective operators of the standard model fields which would yield an observable rate of neutrinoless double beta decay. We particularly focus on the possibility that neutrinoless double beta decay is dominantly induced by lepton-number-violating higher dimensional operators other than the Majorana neutrino mass. Our analysis can be applied to models in which neutrinoless double beta decay is induced either by a strong dynamics or by quantum gravity effects at a fundamental scale near the TeV scale as well as the conventional models in which neutrinoless double beta decay is induced by perturbative renormalizable interactions.

Kiwoon Choi; Kwang Sik Jeong; Wan Young Song

2002-07-19T23:59:59.000Z

29

Environmental impact report addendum for the continued operation of Lawrence Livermore National Laboratory  

SciTech Connect (OSTI)

An environmental impact statement/environmental impact report (ES/EIR) for the continued operation and management of Lawrence Livermore National Laboratory (LLNL) was prepared jointly by the U.S. Department of Energy (DOE) and the University of California (UC). The scope of the document included near-term (within 5-10 years) proposed projects. The UC Board of Regents, as state lead agency under the California Environmental Quality Act (CEQA), certified and adopted the EIR by issuing a Notice of Determination on November 20, 1992. The DOE, as the lead federal agency under the National Environmental Policy Act (NEPA), adopted a Record of Decision for the ES on January 27, 1993 (58 Federal Register [FR] 6268). The DOE proposed action was to continue operation of the facility, including near-term proposed projects. The specific project evaluated by UC was extension of the contract between UC and DOE for UC`s continued operation and management of LLNL (both sites) from October 1, 1992, through September 30, 1997. The 1992 ES/EIR analyzed impacts through the year 2002. The 1992 ES/EIR comprehensively evaluated the potential environmental impacts of operation and management of LLNL within the near-term future. Activities evaluated included programmatic enhancements and modifications of facilities and programs at the LLNL Livermore site and at LLNL`s Experimental Test Site (Site 300) in support of research and development missions 2048 established for LLNL by Congress and the President. The evaluation also considered the impacts of infrastructure and building maintenance, minor modifications to buildings, general landscaping, road maintenance, and similar routine support activities.

Weston, R. F. [Roy F. Weston, Inc. (United States)

1996-10-01T23:59:59.000Z

30

EIS-0238-S1: Supplemental Environmental Impact Statement to the Final Site-Wide Environmental Impact Statement for Continued Operation of the Los Alamos National Laboratory, New Mexico  

Broader source: Energy.gov [DOE]

The Department of Energy (DOE), Albuquerque Operations Office, has prepared a Supplemental Analysis (SA) to determine if the Site-Wide Environmental Impact Statement for Continued Operations of Los Alamos National Laboratory (SWEIS) adequately addresses the environmental effects of a proposal for modifying current methods utilized to receive and manage certain offsite unwanted radioactive sealed sources at Los Alamos National Laboratory or if additional documentation under the National Environmental Policy Act (NEPA) is needed.

31

DOE/EIS-0238, Site-Wide Environmental Impact Statement for Continued Operation of the Los Alamos National Laboratory (1999)  

Broader source: Energy.gov [DOE]

DOE proposes to continue operating the Los Alamos National Laboratory (LANL) located in Los Alamos County, in north-central New Mexico. DOE has identified and assessed four alternatives for the...

32

Motor current signature analysis for determining operational readiness of motor-operated valves (MOVs)  

SciTech Connect (OSTI)

Motor current signature analysis (MCSA) is a novel diagnostic process for condition monitoring of electric-motor-driven mechanical equipment (e.g., pumps, motor-operated valves, compressors, and processing machinery). The MCSA process identifies, characterizes, and trends over time the instantaneous load variations of mechanical equipment in order to diagnose changes in the condition of the equipment (e.g., due to degradation or service wear), which, if allowed to continue, may lead to failure. It monitors the instantaneous variations (noise content) in the electric current flowing through the power leads to the electric motor that drives the equipment. The motor itself thereby acts as a transducer, sensing both large and small, long-term and rapid, mechanical load variations and converting them to variations in the induced current generated in the motor windings. This motor current noise signature is detected, amplified, and further processed as needed to examine its time domain and frequency domain (spectral) characteristics. The operational principles of MCSA and the nonintrusive data collection apparatus and procedure used with MOVs will be described. Data collected from MOVs in both laboratory and in-plant environments will also be shown to illustrate the ability of MCSA to ''see'' the detailed inner workings of the valve and operator and thus to detect degraded performance at an incipient stage. (Set of 18 vugraphs)

Kryter, R.C.; Haynes, H.D.

1987-01-01T23:59:59.000Z

33

An analysis of nuclear power plant operating costs: A 1995 update  

SciTech Connect (OSTI)

Over the years real (inflation-adjusted) O&M cost have begun to level off. The objective of this report is to determine whether the industry and NRC initiatives to control costs have resulted in this moderation in the growth of O&M costs. Because the industry agrees that the control of O&M costs is crucial to the viability of the technology, an examination of the factors causing the moderation in costs is important. A related issue deals with projecting nuclear operating costs into the future. Because of the escalation in nuclear operating costs (and the fall in fossil fuel prices) many State and Federal regulatory commissions are examining the economics of the continued operation of nuclear power plants under their jurisdiction. The economics of the continued operation of a nuclear power plant is typically examined by comparing the cost of the plants continued operation with the cost of obtaining the power from other sources. This assessment requires plant-specific projections of nuclear operating costs. Analysts preparing these projections look at past industry-wide cost trends and consider whether these trends are likely to continue. To determine whether these changes in trends will continue into the future, information about the causal factors influencing costs and the future trends in these factors are needed. An analysis of the factors explaining the moderation in cost growth will also yield important insights into the question of whether these trends will continue.

NONE

1995-04-21T23:59:59.000Z

34

General purpose dynamic Monte Carlo with continuous energy for transient analysis  

SciTech Connect (OSTI)

For safety assessments transient analysis is an important tool. It can predict maximum temperatures during regular reactor operation or during an accident scenario. Despite the fact that this kind of analysis is very important, the state of the art still uses rather crude methods, like diffusion theory and point-kinetics. For reference calculations it is preferable to use the Monte Carlo method. In this paper the dynamic Monte Carlo method is implemented in the general purpose Monte Carlo code Tripoli4. Also, the method is extended for use with continuous energy. The first results of Dynamic Tripoli demonstrate that this kind of calculation is indeed accurate and the results are achieved in a reasonable amount of time. With the method implemented in Tripoli it is now possible to do an exact transient calculation in arbitrary geometry. (authors)

Sjenitzer, B. L.; Hoogenboom, J. E. [Delft Univ. of Technology, Dept. of Radiation, Radionuclide and Reactors, Mekelweg 15, 2629JB Delft (Netherlands)

2012-07-01T23:59:59.000Z

35

Operator`s guide for VAXGAP, a gamma-ray spectrum analysis package  

SciTech Connect (OSTI)

This report describes the gamma-ray analysis program VAXGAP, which has continually evolved at the Idaho National Engineering Laboratory over a period of several years. It is an integrated suite of computer programs for performing analyses of pulse-height spectra from high-resolution gamma-ray spectrometers and assorted support functions. VAXGAP programs operate on Digital Equipment Corporation (DEC) VAX computers running the VMS operating system, and were written in VAX FORTRAN and DEC Digital Command Language (DCL). These programs make use of DEC GKS and ReGIS for graphical output on standard terminals and printers, and DEC windows for graphics on workstations and terminals that support the X Window System protocol. This report addresses the use of VAXGAP for data acquisition and control, energy scale calibration, and real-time analyses of background and sample pulse-height spectra. Also addressed are the creation and use efficiency tables and isotope libraries, manipulation of spectrum files and their contents, and graphical display of on-going acquisitions, saved spectra, and mathematical fits to spectral peaks.

Killian, E.W.; Femec, D.A.

1992-08-01T23:59:59.000Z

36

Analysis of accidents during flashing operations  

E-Print Network [OSTI]

University, 1976 Federal Highway Administration Study, 1980 San Francisco Study National Study Portland, Oregon Study Summary of Literature Review Studies 13 14 16 17 20 CHAPTER Page III. ACCIDENT ANALYSIS METHODOLOGY . 22 Study Site Location... V. SUMMARY AND FINDINGS 44 REFERENCES 48 VITA 50 LIST OF TABLES TABLE 1. Groupings for Marson's Accident Analysis 2. Groupings for San Francisco Accident Analysis 3. Groupings for Portland Accident Analysis 4. Sample Sizes by Volume Ratio 5...

Obermeyer, Michael Edward

1993-01-01T23:59:59.000Z

37

Statistical pert analysis using integral operators  

E-Print Network [OSTI]

of Optimization Algorithm. IV CONCLUSIONS AND SUMMARY. 23 25 27 BIBLIOGRAPHY' 29 VITA. 30 vi LIST OF FIGURES Figure Page 2. 1 Activities In Parallel. 2. 2 Activities In Series. 2. 3 2. 4 Wheatstone Bridge Double Wheatstone Bridge. 10 10 2. 5...] extended Hartley and Wortham's method by developing integral operators for activities in double wheatstone bridges and in different types of crise-crosses. Ringer [8] also developed integral operators for activities whose completion times...

Ohlendorf, Curtis Gilbert

1969-01-01T23:59:59.000Z

38

EIS-0147: Continued Operation of the K-,L-, and P- Reactors, Savannah River Site, Aiken, South Carolina  

Broader source: Energy.gov [DOE]

This environmental impact statement (EIS) analyzes the environmental impacts of the proposed action, which is to continue operation of K-, L-, and P-Reactors at the Savannah River Site (SRS) to ensure the capability to produce nuclear materials, and to produce nuclear materials as necessary for United States defense and nondefense programs.

39

Integrating UF6 Cylinder RF Tracking With Continuous Load Cell Monitoring for Verifying Declared UF6 Feed and Withdrawal Operations Verifying Declared UF6 Feed and Withdrawal Operations  

SciTech Connect (OSTI)

Oak Ridge National Laboratory is demonstrating the integration of UF6 cylinder tracking, using RF technology, with continuous load cell monitoring (CLCM) at mock UF6 feed and withdrawal (F&W) stations. CLCM and cylinder tracking are two of several continuous-monitoring technologies that show promise in providing integrated safeguards of F&W operations at enrichment plants. Integrating different monitoring technologies allows advanced, automated event processing to screen innocuous events thereby minimizing false alerts to independent inspectors. Traditionally, international inspectors rely on batch verification of material inputs and outputs derived from operator declarations and periodic on-site inspections at uranium enrichment plants or other nuclear processing facilities. Continuously monitoring F&W activities between inspections while providing filtered alerts of significant operational events will substantially increase the amount of valuable information available to inspectors thereby promising to enhance the effectiveness of safeguards and to improve efficiency in conducting on-site inspections especially at large plants for ensuring that all operations are declared.

Krichinsky, Alan M [ORNL; Miller, Paul [ORNL; Pickett, Chris A [ORNL; Richardson, Dave [ORNL; Rowe, Nathan C [ORNL; Whitaker, J Michael [ORNL; Younkin, James R [ORNL

2009-01-01T23:59:59.000Z

40

Operations for inference in continuous Bayesian networks with linear deterministic variables  

E-Print Network [OSTI]

An important class of continuous Bayesian networks are those that have linear conditionally deterministic variables (a variable that is a linear deterministic function of its parents). In this case, the joint density function for the variables...

Cobb, Barry R.; Shenoy, Prakash P.

2006-05-01T23:59:59.000Z

Note: This page contains sample records for the topic "analysis continued operation" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

EIS-0018: Continued Operation of Los Alamos Scientific Laboratory Site, Los Alamos, New Mexico  

Broader source: Energy.gov [DOE]

The U.S. Department of Energy prepared this statement to assesses the potential cumulative environmental impacts associated with current, known future, and continuing activities at the Los Alamos Scientific Laboratory site.

42

The simulation and analysis of continuous single product manufacturing systems  

E-Print Network [OSTI]

there was insufficient time to develop new methods or concepts in ammunition production, even though more ad- vanced techn1ques were being employed by private 1ndustry in similar fields. After the war the Government Owned Contractor Operated (GOCO) Plants were either...

Snyder, Theodore Robert

1974-01-01T23:59:59.000Z

43

Motor current signature analysis method for diagnosing motor operated devices  

DOE Patents [OSTI]

A motor current noise signature analysis method and apparatus for remotely monitoring the operating characteristics of an electric motor-operated device such as a motor-operated valve. Frequency domain signal analysis techniques are applied to a conditioned motor current signal to distinctly identify various operating parameters of the motor driven device from the motor current signature. The signature may be recorded and compared with subsequent signatures to detect operating abnormalities and degradation of the device. This diagnostic method does not require special equipment to be installed on the motor-operated device, and the current sensing may be performed at remote control locations, e.g., where the motor-operated devices are used in accessible or hostile environments.

Haynes, Howard D. (Kingston, TN); Eissenberg, David M. (Oak Ridge, TN)

1990-01-01T23:59:59.000Z

44

Toward demonstrating controlled-X operation based on continuous-variable four-partite cluster states and quantum teleporters  

SciTech Connect (OSTI)

One-way quantum computation based on measurement and multipartite cluster entanglement offers the ability to perform a variety of unitary operations only through different choices of measurement bases. Here we present an experimental study toward demonstrating the controlled-X operation, a two-mode gate in which continuous variable (CV) four-partite cluster states of optical modes are utilized. Two quantum teleportation elements are used for achieving the gate operation of the quantum state transformation from input target and control states to output states. By means of the optical cluster state prepared off-line, the homodyne detection and electronic feeding forward, the information carried by the input control state is transformed to the output target state. The presented scheme of the controlled-X operation based on teleportation can be implemented nonlocally and deterministically. The distortion of the quantum information resulting from the imperfect cluster entanglement is estimated with the fidelity.

Wang Yu; Su Xiaolong; Shen Heng; Tan Aihong; Xie Changde; Peng Kunchi [State Key Laboratory of Quantum Optics and Quantum Optics Devices, Institute of Opto-Electronics, Shanxi University, Taiyuan, 030006 (China)

2010-02-15T23:59:59.000Z

45

Wavelet based analysis of circuit breaker operation  

E-Print Network [OSTI]

and close coil currents (TC or CC in Fig. 4) are most important signals being monitored. Each trip and close coil encloses a plunger that belongs to the operating mechanism. When trip or close coil are energized, the electric-magnetic force on the plunger... ?a? opens the current path to the trip coil. Auxiliary ?a? contact is designed to open when the main contacts begin to open. Trip coil quickly de-energizes and the current returns to zero. 0 50 100 150 200 250 300ms 0 50 100 150 200...

Ren, Zhifang Jennifer

2004-09-30T23:59:59.000Z

46

Vector Zonal Operations for Spatiotemporal Analysis  

E-Print Network [OSTI]

for Total Amount of Phosphorous -------------------------28 5.3.3 Statistical Results for Turbidity --------------------------------------------------38 IV 5.4 Procedures to Perform the Spatiotemporal Analysis.... 5.3.2 Statistical Results for Total Amount of Phosphorous Using these spatiotemporal zones, antecedent precipitation values for each water sample in space and time were extracted. Because the antecedent precipitation values could be zero...

Xu, Tingting

2009-12-11T23:59:59.000Z

47

Results of Continuous Load Cell Monitoring Field Trial for UF6 Withdrawals at an Operating Industrial Plant  

SciTech Connect (OSTI)

Continuous load cell monitoring (CLCM) has been implemented and tested for use as a safeguards tool during a 2009 field trial in an operating UF6 transfer facility. The transfer facility is part of the Portsmouth Gaseous Diffusion Plant in Piketon, Ohio, operated by the United States Enrichment Corporation. During the field trial, two process scales for UF{sub 6} cylinders were continuously monitored for a 6-month period as cylinders were being filled. The collected CLCM data were used in testing an event processor serving as a filter for highlighting measurements representing significant operational activities that are important in verifying declared operations. The collection of CLCM data, coupled with rules-based event processing, can provide inspectors with knowledge of a facility's feed and withdrawal activities occurring between site visits. Such process knowledge promises to enhance the effectiveness of safeguards by enabling inspectors to quantitatively compare declared activities directly with process measurements. Selected results of the field trial and event processing will be presented in the context of their value to an independent inspector and a facility operator.

Krichinsky, Alan M [ORNL] [ORNL; Bell, Lisa S [ORNL] [ORNL; Conchewski, Curtis A [ORNL] [ORNL; Peters, Benjamin R [ORNL] [ORNL; Pickett, Chris A [ORNL] [ORNL; Richardson, Dave [ORNL] [ORNL; Rowe, Nathan C [ORNL] [ORNL; Younkin, James R [ORNL] [ORNL

2010-01-01T23:59:59.000Z

48

Assessing the operational life of flexible printed boards intended for continuous flexing applications : a case study.  

SciTech Connect (OSTI)

Through the vehicle of a case study, this paper describes in detail how the guidance found in the suite of IPC (Association Connecting Electronics Industries) publications can be applied to develop a high level of design assurance that flexible printed boards intended for continuous flexing applications will satisfy specified lifetime requirements.

Beck, David Franklin

2011-01-01T23:59:59.000Z

49

Houston LDAR II network: design, operation, and performance analysis  

E-Print Network [OSTI]

HOUSTON LDAR II NETWORK: DESIGN, OPERATION, AND PERFORMANCE ANALYSIS A Dissertation by BRANDON LEE ELY Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment of the requirements for the degree... of DOCTOR OF PHILOSOPHY August 2008 Major Subject: Atmospheric Sciences HOUSTON LDAR II NETWORK: DESIGN, OPERATION, AND PERFORMANCE ANALYSIS A Dissertation by BRANDON LEE ELY Submitted to the Office of Graduate Studies of Texas A...

Ely, Brandon Lee

2008-10-10T23:59:59.000Z

50

Principal Component Analysis Over Continuous Subspaces and Intersection of Half-spaces ?  

E-Print Network [OSTI]

Principal Component Analysis Over Continuous Subspaces and Intersection of Half-spaces ? Anat Levin for dimensionality reduction of multivariate data with many application areas in image analysis, pattern recog Component Analysis (PCA) is one of the most pop- ular techniques for dimensionality reduction

51

Principal Component Analysis Over Continuous Subspaces and Intersection of Half-spaces?  

E-Print Network [OSTI]

Principal Component Analysis Over Continuous Subspaces and Intersection of Half-spaces? Anat Levin for dimensionality reduction of multivariate data with many application areas in image analysis, pattern recog for data analysis comes from its e cient computational mechanism, the fact that it is well understood

Shashua, Amnon

52

IEEE TRANSACTIONS ON PATTERN ANALYSIS AND MACHINE INTELLIGENCE, VOL. ?, NO. ?, MONTH 201? 1 Continuous Energy Minimization  

E-Print Network [OSTI]

IEEE TRANSACTIONS ON PATTERN ANALYSIS AND MACHINE INTELLIGENCE, VOL. ?, NO. ?, MONTH 201? 1 Continuous Energy Minimization for Multi-Target Tracking Anton Milan, Student Member, IEEE, Stefan Roth-target tracking as minimization of a continuous energy. Contrary to recent approaches, we focus on designing

Schindler, Konrad

53

Meeting the reactor operator's information needs using functional analysis  

SciTech Connect (OSTI)

Since the accident at Three Mile Island, many ideas have been proposed for assisting the reactor operator during emergency situations. However, some of the suggested remedies do not alleviate an important shortcoming of the TMI control room: the operators were not presented with the information they needed in a manner which would allow prompt diagnosis of the problem. To address this problem, functional analysis is being applied at the LOFT facility to ensure that the operator's information needs are being met in his procedures and graphic displays. This paper summarizes the current applications of functional analysis at LOFT.

Nelson, W.R.; Clark, M.T.

1980-01-01T23:59:59.000Z

54

Bootstrap multiscale analysis and localization for multi-particle continuous Anderson Hamiltonians  

E-Print Network [OSTI]

We extend the bootstrap multiscale analysis developed by Germinet and Klein to the multi-particle continuous Anderson Hamiltonian, obtaining Anderson localization with finite multiplicity of eigenvalues, decay of eigenfunction correlations, and a strong form of dynamical localization.

Abel Klein; Son Nguyen

2014-04-15T23:59:59.000Z

55

Continuity of Operations (COOP) Implementation Plan | U.S. DOE Office of  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-Series to User GroupInformationE-Gov Contacts forScience (SC) Continuity of

56

Flammable gas/slurry growth unreviewed safety question:justification for continued operation for the tank farms at the Hanford site  

SciTech Connect (OSTI)

This Justification for Continued Operation (JCO) provides a basis for continued operation in 176 high level waste tanks, double contained receiver tanks (DCRTs), catch tanks, 244-AR Vault, 242-S and 242-T Evaporators and inactive miscellaneous underground storage tanks (IMUSTs) relative to flammable gas hazards. Required controls are specified.

Leach, C.E., Westinghouse Hanford

1996-07-31T23:59:59.000Z

57

Stage Right operational safety analysis and evaluation of Pantex personnel operations  

SciTech Connect (OSTI)

This report documents a study (Stage Right Operational Safety Analysis) that was performed to evaluate the effects of new Stage Right operations on the safety of Pantex personnel who perform the operations and maintain the equipment. The primary concern of the evaluation was for personnel safety during Stage Right operations, but operations equipment damage and degradation also were taken into account. This analysis evaluates safety of the work process in the staging of dismantled nuclear weapon pits within the modified Richmond magazines only. This Stage Right Process and Operational Safety Analysis includes the following processes: moving the pelletized drums from the pallet trailer to the pallet turner, staging of pallets and removal of pallets from the magazine, recovery from an incident in a magazine, setting up, opening, and closing a Zone 4 magazine, inventory of pelletized drums in the magazines, transporting pelletized drums from Zone 12 to Zone 4, and maintenance on the shielded lift truck that involves removal of the cab shielding. The analysis includes the following undesirable consequences: injury to personnel, breach of an AL-R8 container, drop of a loaded pallet, damage to equipment, and equipment unreliability.

Rountree, S.L.K.; Whitehurst, H.O.; Tomlin, E.H.; Restrepo, L.F. [Sandia National Labs., Albuquerque, NM (United States); White, J. [Sandia National Labs., Albuquerque, NM (United States)]|[Intera, Albuquerque, NM (United States)

1995-01-01T23:59:59.000Z

58

Environmental analysis of the operation of Oak Ridge National Laboratory (X-10 site)  

SciTech Connect (OSTI)

An environmental analysis of the operation of the Oak Ridge National Laboratory (ORNL) facilities in Bethel Valley and Melton Valley was conducted to present to the public information concerning the extent to which recognizable effects, or potential effects, on the environment may occur. The analysis addresses current operations of the ORNL X-10 site and completed operations that may continue to have residual effects. Solid wastes from ORNL operations at the Y-12 site which are transported to the X-10 site for burial (e.g., Biology Division animal wastes) are included as part of X-10 site operation. Socioeconomic effects are associated primarily with the communities where employees live and with the Knoxville Bureau of Economic Analysis economic area as a whole. Therefore, ORNL employees at both Y-12 and X-10 sites are included in the ORNL socioeconomic impact analysis. An extensive base of environmental data was accumulated for this report. Over 80 reports related to ORNL facilities and/or operations are cited as well as many open-literature citations. Environmental effects of the operation of ORNL result from operational discharges from the onsite facilities; construction and/or modification of facilities, transportation to and from the site of persons, goods and services; socioeconomic impacts to the local, regional, and general population; and accidental discharges if they should occur. Operational discharges to the environnment are constrained by federal, state, and local regulations and by criteria established by the US Department of Energy to minimize adverse impacts. It is the purpose of this document to evaluate the operation of the ORNL insofar as impacts beyond the site boundary may occur or have the potential for occurrence.

Boyle, J.W.; Blumberg, R.; Cotter, S.J.

1982-11-01T23:59:59.000Z

59

MANGO – Modal Analysis for Grid Operation: A Method for Damping Improvement through Operating Point Adjustment  

SciTech Connect (OSTI)

Small signal stability problems are one of the major threats to grid stability and reliability in the U.S. power grid. An undamped mode can cause large-amplitude oscillations and may result in system breakups and large-scale blackouts. There have been several incidents of system-wide oscillations. Of those incidents, the most notable is the August 10, 1996 western system breakup, a result of undamped system-wide oscillations. Significant efforts have been devoted to monitoring system oscillatory behaviors from measurements in the past 20 years. The deployment of phasor measurement units (PMU) provides high-precision, time-synchronized data needed for detecting oscillation modes. Measurement-based modal analysis, also known as ModeMeter, uses real-time phasor measurements to identify system oscillation modes and their damping. Low damping indicates potential system stability issues. Modal analysis has been demonstrated with phasor measurements to have the capability of estimating system modes from both oscillation signals and ambient data. With more and more phasor measurements available and ModeMeter techniques maturing, there is yet a need for methods to bring modal analysis from monitoring to actions. The methods should be able to associate low damping with grid operating conditions, so operators or automated operation schemes can respond when low damping is observed. The work presented in this report aims to develop such a method and establish a Modal Analysis for Grid Operation (MANGO) procedure to aid grid operation decision making to increase inter-area modal damping. The procedure can provide operation suggestions (such as increasing generation or decreasing load) for mitigating inter-area oscillations.

Huang, Zhenyu; Zhou, Ning; Tuffner, Francis K.; Chen, Yousu; Trudnowski, Daniel J.; Diao, Ruisheng; Fuller, Jason C.; Mittelstadt, William A.; Hauer, John F.; Dagle, Jeffery E.

2010-10-18T23:59:59.000Z

60

Analysis and Modeling of Ground Operations at Hub Airports  

E-Print Network [OSTI]

constraint in the departure process at busy airports like Boston Logan International airport. For example1 Analysis and Modeling of Ground Operations at Hub Airports Kari Andersson1 , Francis Carr2 , Eric Feron3 and William D. Hall4 Abstract: Building simple and accurate models of hub airports can

Feron, Eric

Note: This page contains sample records for the topic "analysis continued operation" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Continuous Energy Management of the HVAC&R System in an Office Building System Operation and Energy Consumption for the Eight Years after Building Completion  

E-Print Network [OSTI]

The authors continuously studied the energy consumption of a heating, ventilating, air- conditioning and refrigerating (HVAC&R) system in an office for the operation of the system in terms of its expected performance. A fault in the system control...

Akashi, Y.; Shinozaki, M.; Kusuda, R.; Ito, S.

2006-01-01T23:59:59.000Z

62

Operations other than war: Requirements for analysis tools research report  

SciTech Connect (OSTI)

This report documents the research effort to determine the requirements for new or improved analysis tools to support decisions at the strategic and operational levels for military Operations Other than War (OOTW). The work was performed for the Commander in Chief, U.S. Pacific Command (USCINCPAC). The data collection was based on workshops attended by experts in OOTWs: analysis personnel from each of the Combatant Commands, the Services, the Office of the Secretary of Defense (OSD), the Joint Staff, and other knowledgeable personnel. Further data were gathered from other workshops and conferences and from the literature. The results of this research begin with the creation of a taxonomy of OOTWs: categories of operations, attributes of operations, and tasks requiring analytical support. The tasks are connected to the Joint Staff`s Universal Joint Task List (UJTL). Historical OOTWs are analyzed to produce frequency distributions by category and responsible CINC. The analysis products are synthesized into a list of requirements for analytical tools and definitions of the requirements. The report concludes with a timeline or roadmap for satisfying the requirements.

Hartley, D.S. III

1996-12-01T23:59:59.000Z

63

Silicon avalanche photodiode operation and lifetime analysis for small satellites  

E-Print Network [OSTI]

Silicon avalanche photodiodes (APDs) are sensitive to operating temperature fluctuations and are also susceptible to radiation flux expected in satellite-based quantum experiments. We introduce a low power voltage adjusting mechanism to overcome the effects of in-orbit temperature fluctuations. We also present data on the performance of Si APDs after irradiation (gamma-ray and proton beam). Combined with an analysis of expected orbital irradiation, we propose that a Si APD in a 400 km equatorial orbit may operate beyond the lifetime of the satellite.

Tan, Yue Chuan; Cheng, Cliff; Ling, Alexander

2013-01-01T23:59:59.000Z

64

Silicon avalanche photodiode operation and lifetime analysis for small satellites  

E-Print Network [OSTI]

Silicon avalanche photodiodes (APDs) are sensitive to operating temperature fluctuations and are also susceptible to radiation flux expected in satellite-based quantum experiments. We introduce a low power voltage adjusting mechanism to overcome the effects of in-orbit temperature fluctuations. We also present data on the performance of Si APDs after irradiation (gamma-ray and proton beam). Combined with an analysis of expected orbital irradiation, we propose that a Si APD in a 400 km equatorial orbit may operate beyond the lifetime of the satellite.

Yue Chuan Tan; Rakhitha Chandrasekara; Cliff Cheng; Alexander Ling

2013-06-28T23:59:59.000Z

65

An analysis of repository waste-handling operations  

SciTech Connect (OSTI)

This report has been prepared to document the operational analysis of waste-handling facilities at a geologic repository for high-level nuclear waste. The site currently under investigation for the geologic repository is located at Yucca Mountain, Nye County, Nevada. The repository waste-handling operations have been identified and analyzed for the year 2011, a steady-state year during which the repository receives spent nuclear fuel containing the equivalent of 3000 metric tons of uranium (MTU) and defense high-level waste containing the equivalent of 400 MTU. As a result of this analysis, it has been determined that the waste-handling facilities are adequate to receive, prepare, store, and emplace the projected quantity of waste on an annual basis. In addition, several areas have been identified where additional work is required. The recommendations for future work have been divided into three categories: items that affect the total waste management system, operations within the repository boundary, and the methodology used to perform operational analyses for repository designs. 7 refs., 48 figs., 11 tabs.

Dennis, A.W.

1990-09-01T23:59:59.000Z

66

Final Environmental Impact Statement and Environmental Impact Report for continued operation of Lawrence Livermore National Laboratory and Sandia National Laboratories, Livermore. Executive summary  

SciTech Connect (OSTI)

The US Department of Energy (DOE) and the Regents of the University of California (UC) propose the continued operation, including near-term proposed projects, of the Lawrence Livermore National Laboratory (LLNL). In addition, DOE proposes the continued operation, including near-term proposed projects, of Sandia National Laboratories, Livermore (SNL, Livermore). Continued operation plus proposed projects at the two Laboratories is needed so that the research and development missions established by Congress and the President can continue to be supported. As provided and encouraged by the National Environmental Policy Act (NEPA) and the California Environmental Quality Act (CEQA), DOE and UC have prepared this document as a joint Environmental Impact Statement (EIS) and Environmental Impact Report (EIR) to analyze the impacts of the proposed action. In addition, this document discusses a no action alternative for continuing operations at FY 1992 funding levels without further growth, a modification of operations alternative focused on specific adverse environmental impacts of operations or facilities, and a shutdown and decommissioning alternative. This document also examines the alternative of UC discontinuing its management of LLNL after the current contract expires on September 30, 1992. The environmental documentation process provides information to the public, government agencies, and decision makers about the environmental impacts of implementing the proposed and alternative actions. In addition, this environmental documentation identifies alternatives and possible ways to reduce or prevent environmental impacts. A list of the issues raised through the EIS/EIR scoping process is presented.

Not Available

1992-08-01T23:59:59.000Z

67

Site-Wide Environmental Impact Statement for the Continued Operation of the Los Alamos National Laboratory, Los Alamos, New Mexico (Final)  

SciTech Connect (OSTI)

DOE proposes to continue operating the Los Alamos National Laboratory (LANL) located in Los Alamos County, in north-central New Mexico. DOE has identified and assessed four alternatives for the operation of LANL: (1) No Action, (2) Expanded Operations, (3) Reduced Operations, and (4) Greener. Expanded Operations is DOE's Preferred Alternative, with the exception that DOE would only implement pit manufacturing at a level of 20 pits per year. In the No Action Alternative, DOE would continue the historical mission support activities LANL has conducted at planned operational levels. In the Expanded Operations Alternative, DOE would operate LANL at the highest levels of activity currently foreseeable, including full implementation of the mission assignments from recent programmatic documents. Under the Reduced Operations Alternative, DOE would operate LANL at the minimum levels of activity necessary to maintain the capabilities to support the DOE mission in the near term. Under the Greener Alternative, DOE would operate LANL to maximize operations in support of nonproliferation, basic science, materials science, and other nonweapons areas, while minimizing weapons activities. Under all of the alternatives, the affected environment is primarily within 50 miles (80 kilometers) of LANL. Analyses indicate little difference in the environmental impacts among alternatives. The primary discriminators are: collective worker risk due to radiation exposure, socioeconomic effects due to LANL employment changes, and electrical power demand.

N /A

1999-02-19T23:59:59.000Z

68

Continued Evaluation of the Pulse-Echo Ultrasonic Instrument for Critical Velocity Determination during Hanford Tank Waste Transfer Operations  

SciTech Connect (OSTI)

Laboratory (PNNL) conducted an extensive evaluation of the ability of three ultrasonic instruments to detect critical velocity for a broad range of simulated Hanford nuclear waste streams containing particles with mean particle sizes of >50 microns. Evaluations were perform using the pipe loop at the Process Development Laboratory – East (PDL-E) at PNNL that was designed and built to evaluate the pipeline plugging issue during slurry transfer operations at the Hanford Waste Treatment Plant. In 2011 the ability of the ultrasonic PulseEcho system to detect critical velocity continued to be evaluated using the PDL-E flow loop and new simulants containing high-density particles with a mean particle size of < 15 microns. The PDL-E flow loop was modified for the 2011 testing to include a new test section that contained 5-MHz and 10-MHz ultrasonic transducers non-invasively mounted to schedule 40 pipe. The test section also contained reference instrumentation to facilitate direct comparison of the real-time PulseEcho transducer responses with experimentally observed critical velocities. This paper presents the results from the 2011 PulseEcho evaluation using a variety of simulated Hanford nuclear waste streams that were selected to encompass the expected high-level waste feed properties.

Denslow, Kayte M.; Bontha, Jagannadha R.; Adkins, Harold E.; Jenks, Jeromy WJ; Burns, Carolyn A.; Schonewill, Philip P.; Hopkins, Derek F.; Thien, Michael G.; Wooley, Theodore A.

2012-04-01T23:59:59.000Z

69

Job Task Analysis: Building Operations Professional; February - December 2014  

SciTech Connect (OSTI)

This report describes the process for and results of a comprehensive job task analysis of Building Operations Professionals. This study was performed by Professional Testing on behalf of the National Renewable Energy Laboratory (NREL). The competency (domains, tasks and associated knowledge) list, which defines the work performed by practitioners, was initially developed by a representative panel of practitioners during a meeting held on February 10-12, 2014 in Orlando Florida. Following the identification of the job tasks and associated knowledge and skills, a validation survey was conducted of the finding of the JTA and the results of the validation study were reviewed by a representative panel of practitioners during a conference call held on May 30, 2014. The committee finalized the JTA and examination blueprints for the Building Operations Professional credential scheme based on the survey results.

Woodley, C. D.

2015-01-01T23:59:59.000Z

70

Hazardous-waste analysis plan for LLNL operations  

SciTech Connect (OSTI)

The Lawrence Livermore National Laboratory is involved in many facets of research ranging from nuclear weapons research to advanced Biomedical studies. Approximately 80% of all programs at LLNL generate hazardous waste in one form or another. Aside from producing waste from industrial type operations (oils, solvents, bottom sludges, etc.) many unique and toxic wastes are generated such as phosgene, dioxin (TCDD), radioactive wastes and high explosives. One key to any successful waste management program must address the following: proper identification of the waste, safe handling procedures and proper storage containers and areas. This section of the Waste Management Plan will address methodologies used for the Analysis of Hazardous Waste. In addition to the wastes defined in 40 CFR 261, LLNL and Site 300 also generate radioactive waste not specifically covered by RCRA. However, for completeness, the Waste Analysis Plan will address all hazardous waste.

Roberts, R.S.

1982-02-12T23:59:59.000Z

71

Continuity Programs  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

The order provides requirements and responsibilities to ensure that the Department is ready to respond promptly, efficiently, and effectively to a continuity event involving facilities, activities, or operations. Cancels DOE O 150.1.

2014-03-31T23:59:59.000Z

72

Continuity Programs  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

The order provides requirements and responsibilities to ensure that the Department is ready to respond promptly, efficiently, and effectively to a continuity event involving facilities, activities, or operations. No cancellation. Canceled by DOE O 150.1A.

2008-05-08T23:59:59.000Z

73

FREEWAY PERFORMANCE MEASUREMENT SYSTEM (PeMS): AN OPERATIONAL ANALYSIS TOOL  

E-Print Network [OSTI]

and calibrate simulation models. The paper describes the use of PeMS in conducting operational analysis from case studies on conducting freeway operational analyses, bottleneck identification, Level and researchers in conducting freeway operational analyses, bottleneck identification, determining the Level

Varaiya, Pravin

74

A continuous traffic study as a source of input data for the computation of operating ratios for selected weight brackets  

E-Print Network [OSTI]

Purpose Scope Need for Adequate Cost Data Methods and Procedures HISTORICAL DEVELOPMENT OF FREIGHT TRAFFIC STUDIES Xn tro due t ion Waybill Studies Special Purpose Studies General Purpose Studies Continuous Waybi, ll Sample Sample Selection... Uses of Waybill Data Freight Bill Studies One' Day Studies Fixed Period Studies Continuous Traffic Studies Continuous Traffic Study and the Regulatory Body Summary METHODOLOGY sge 1 2 4 ) 'I 1 1 2i 21 22 26 27 27 37 38 40 42...

Jones, James Davis

1966-01-01T23:59:59.000Z

75

Using Information from Operating Experience to Inform Human Reliability Analysis  

SciTech Connect (OSTI)

This paper reports on efforts being sponsored by the U.S. NRC and performed by INEEL to develop a technical basis and perform work to extract information from sources for use in HRA. The objectives of this work are to: 1) develop a method for conducting risk-informed event analysis of human performance information that stems from operating experience at nuclear power plants and for compiling and documenting the results in a structured manner; 2) provide information from these analyses for use in risk-informed and performance-based regulatory activities; 3) create methods for information extraction and a repository for this information that, likewise, support HRA methods and their applications.

Bruce P. Hallbert; David I. Gertman; Julie Marble; Erasmia Lois; Nathan Siu

2004-06-01T23:59:59.000Z

76

Safety analysis, 200 Area, Savannah River Plant: Separations area operations  

SciTech Connect (OSTI)

The nev HB-Line, located on the fifth and sixth levels of Building 221-H, is designed to replace the aging existing HB-Line production facility. The nev HB-Line consists of three separate facilities: the Scrap Recovery Facility, the Neptunium Oxide Facility, and the Plutonium Oxide Facility. There are three separate safety analyses for the nev HB-Line, one for each of the three facilities. These are issued as supplements to the 200-Area Safety Analysis (DPSTSA-200-10). These supplements are numbered as Sup 2A, Scrap Recovery Facility, Sup 2B, Neptunium Oxide Facility, Sup 2C, Plutonium Oxide Facility. The subject of this safety analysis, the, Plutonium Oxide Facility, will convert nitrate solutions of {sup 238}Pu to plutonium oxide (PuO{sub 2}) powder. All these new facilities incorporate improvements in: (1) engineered barriers to contain contamination, (2) barriers to minimize personnel exposure to airborne contamination, (3) shielding and remote operations to decrease radiation exposure, and (4) equipment and ventilation design to provide flexibility and improved process performance.

Perkins, W.C.; Lee, R.; Allen, P.M.; Gouge, A.P.

1991-07-01T23:59:59.000Z

77

An analysis of mobile feed milling operations in Texas  

E-Print Network [OSTI]

or lf it is inoperative due to repairs. We operator who owned twc mobilss vas considering the pxacticality of removing one of the rills frvz its truck chasis and operating it as a stationary mill at his feed store, Another operator operates his mill...

Cunningham, William Carroll

1962-01-01T23:59:59.000Z

78

Operating Experience and Teardown Analysis for Engines Operated on Biodiesel Blends (B20)  

SciTech Connect (OSTI)

In this study, eight engines and fuel systems were removed from trucks operating on B20 or diesel. Results indicate little difference in operational and maintenance costs between the B20- and diesel.

Fraer, R.; Dinh, H.; Proc, K.; McCormick, R. L.; Chandler, K.; Buchholz, B.

2005-11-01T23:59:59.000Z

79

Analysis and evaluation of operational data. Annual report, 1996  

SciTech Connect (OSTI)

The United States Nuclear Regulatory Commission`s Office for Analysis and Evaluation of Operational Data (AEOD) has published reports of its activities since 1984. The first report covered January through June of 1984, and the second report covered July through December of 1984. After those first two semiannual reports, AEOD published annual reports of its activities from 1985 through 1993. Beginning with report for 1986, AEOD Annual Reports have been published as NUREG-1272. Beginning with the report for 1987, NUREG-1272 has been published in two parts, No. 1 covering power reactors and No. 2 covering nonreactors (changed to `nuclear materials` with the 1993 report). AEOD changed its annual report from a calendar year (CY) to a fiscal year report, and added part No. 3 covering technical training, beginning with the combined Annual Report for CY 1994 and fiscal year 1995, NUREG-1272, Vol. 9, Nos. 1-3. This report, NUREG-1272, Vol. 10, No. 2, covers nuclear materials and presents a review of the events and concerns associated with the use of licensed material in applications other than power reactores. NUREG-1272, Vol. 10, No. 1, covers power reactors and presents an overview of the fiscal year 1996 operating experience of the nuclear power industry from the NRC perspective. NUREG-1272, Vol. 10, No. 3, covers technical training and presents the activities of the Technical Training Center in support of the NRC`s mission. Throughout these reports, whenever information is presented for a calendar year, it is so designated. Fiscal year information is designated by the four digits of the fiscal year.

NONE

1997-12-01T23:59:59.000Z

80

Decorrelation estimates for some continuous and discrete random schrödinger operators in dimension one and applications to spectral statistics  

E-Print Network [OSTI]

The purpose of the present work is to establish decorrelation estimates at distinct energies for some random Schr\\"odinger operator in dimension one. In particular, we establish the result for some random operators on the continuum with alloy-type potential. These results are used to give a description of the spectral statistics.

Christopher Shirley

2014-09-30T23:59:59.000Z

Note: This page contains sample records for the topic "analysis continued operation" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Final Environmental Impact Statement and Environmental Impact Report for continued operation of Lawrence Livermore National Laboratory and Sandia National Laboratories, Livermore. Volume 4, Comments and responses  

SciTech Connect (OSTI)

This Environmental Impact Statement/Environmental Impact Report (EIS/EIR) is prepared pursuant to the National Environmental Policy Act (NEPA) and the California Environmental Quality Act (CEQA). This document analyzes the potential environmental impacts of the proposed action: continued operation, including near-term (within 5 to 10 years) proposed projects, of Lawrence Livermore National Laboratory (LLNL) and Sandia National Laboratories, Livermore (SNL, Livermore). Additionally, this document analyzes a no action alternative involving continuing operations at FY 1992 funding levels without further growth, a modification of operations alternative to reduce adverse environmental impacts of operations or facilities, and a shutdown and decommissioning alternative of UC discontinuing its management of LLNL after the current contract expires on September 30, 1992. This document assesses the environmental impacts of the Laboratories` operations on air and water quality, geological and ecological systems, occupational and public health risks, prehistoric and historic resources, endangered species, floodplains and wetlands, socioeconomic resources, hazardous waste management, site contamination, and other environmental issues. The EIS/EIR is divided into five volumes and two companion reports. This volume contains copies of the written comments and transcripts of individual statements at the public hearing and the responses to them.

Not Available

1992-08-01T23:59:59.000Z

82

Final Environmental Impact Statement and Environmental Impact Report for continued operation of Lawrence Livermore National Laboratory and Sandia National Laboratories, Livermore. Volume 1, Text  

SciTech Connect (OSTI)

This Environmental Impact Statement/Environmental Impact Report (EIS/EIR) is prepared pursuant to the National Environmental Policy Act (NEPA) and the California Environmental Quality Act (CEQA). This document analyzes the potential environmental impacts of the proposed action: continued operation, including near-term (within 5 to 10 years) proposed projects, of Lawrence Livermore National Laboratory (LLNL) and Sandia National Laboratories, Livermore (SNL, Livermore). Additionally, this document analyzes a no action alternative involving continuing operations at FY 1992 funding levels without further growth, a modification of operations alternative to reduce adverse environmental impacts of operations or facilities, and a shutdown and decommissioning alternative of UC discontinuing its management of LLNL after the current contract expires on September 30, 1992. This document assesses the environmental impacts of the Laboratories` operations on air and water quality, geological and ecological systems, occupational and public health risks, prehistoric and historic resources, endangered species, floodplains and wetlands, socioeconomic resources, hazardous waste management, site contamination, and other environmental issues. The EIS/EIR is divided into five volumes and two companion reports. This volume contains the Final EIS/EIR, which in part relies on the detailed information in the appendices, and comprehensively discusses the proposed action, the alternatives, and the existing conditions and impacts of the proposed action and the alternatives.

Not Available

1992-08-01T23:59:59.000Z

83

Final Environmental Impact Statement and Environmental Impact Report for continued operation of Lawrence Livermore National Laboratory and Sandia National Laboratories, Livermore. Volume 3, Appendices F--M  

SciTech Connect (OSTI)

This Environmental Impact Statement/Environmental Impact Report (EIS/EIR) is prepared pursuant to the National Environmental Policy Act (NEPA) and the California Environmental Quality Act (CEQA). This document analyzes the potential environmental impacts of the proposed action: continued operation, including near-term (within 5 to 10 years) proposed projects, of Lawrence Livermore National Laboratory (LLNL) and Sandia National Laboratories, Livermore (SNL, Livermore). Additionally, this document analyzes a no action alternative involving continuing operations at FY 1992 funding levels without further growth, a modification of operations alternative to reduce adverse environmental impacts of operations or facilities, and a shutdown and decommissioning alternative of UC discontinuing its management of LLNL after the current contract expires on September 30, 1992. This document assesses the environmental impacts of the Laboratories` operations on air and water quality, geological and ecological systems, occupational and public health risks, prehistoric and historic resources, endangered species, floodplains and wetlands, socioeconomic resources, hazardous waste management, site contamination, and other environmental issues. The EIS/EIR is divided into five volumes and two companion reports. This volume contains the Final EIS/EIR technical appendices F through M. Appendix L has been revised to reflect public information activities since publication of the Draft EIS/EIR. These appendices provide technical support for the analyses in Volume 1 and also provide additional information and references.

Not Available

1992-08-01T23:59:59.000Z

84

Final Environmental Impact Statement/Environmental Impact Report for continued operation of Lawrence Livermore National Laboratory and Sandia National Laboratories, Livermore. Volume 2, Appendices A--D  

SciTech Connect (OSTI)

This Environmental Impact Statement/Environmental Impact Report (EIS/EIR) is prepared pursuant to the National Environmental Policy Act (NEPA) and the California Environmental Quality Act (CEQA). This document analyzes the potential environmental impacts of the proposed action: continued operation, including near-term (within 5 to 10 years) proposed projects, of Lawrence Livermore National Laboratory (LLNL) and Sandia National Laboratories, Livermore (SNL, Livermore). Additionally, this document analyzes a no action alternative involving continuing operations at FY 1992 funding levels without further growth, a modification of operations alternative to reduce adverse environmental impacts of operations or facilities, and a shutdown and decommissioning alternative of UC discontinuing its management of LLNL after the current contract expires on September 30, 1992. This document assesses the environmental impacts of the Laboratories` operations on air and water quality, geological and ecological systems, occupational and public health risks, prehistoric and historic resources, endangered species, floodplains and wetlands, socioeconomic resources, hazardous waste management, site contamination, and other environmental issues. The EIS/EIR is divided into five volumes and two companion reports. This volume contains the Final EIS/EIR technical appendices which provide technical support for the analyses in Volume 1 and also provide additional information and references.

Not Available

1992-08-01T23:59:59.000Z

85

High Performance Class-AB Output Stage Operational Amplifiers for Continuous-time Sigma-delta ADC  

E-Print Network [OSTI]

One of the most critical blocks in a wide-band continuous time sigma delta (CTSD) analog-to-digital converter (ADC) is the loop filter. For most loop filter topologies, the performance of the filter depends largely on the performance...

Krishnan, Lakshminarasimhan

2012-10-19T23:59:59.000Z

86

An optimal Wegner estimate and its application to the global continuity of the integrated density of states for random Schrödinger operators  

E-Print Network [OSTI]

We prove that the integrated density of states (IDS) of random Schr\\"{o}dinger operators with Anderson-type potentials on $L^2 (\\R^d)$, for $d \\geq1$, is locally H\\"{o}lder continuous at all energies with the same H\\"{o}lder exponent $0energies. The single-site potential $u\\in L\\_0^\\infty (\\R^d)$ must be nonnegative and compactly-supported. The unperturbed Hamiltonian must be periodic and satisfy a unique continuation principle. We also prove analogous continuity results for the IDS of random Anderson-type perturbations of the Landau Hamiltonian in two-dimensions. All of these results follow from a new Wegner estimate for local random Hamiltonians with rather general probability measures.

Jean-Michel Combes; Peter Hislop; Frédéric Klopp

2006-10-14T23:59:59.000Z

87

Periodic orbit analysis of a system with continuous symmetry - a tutorial  

E-Print Network [OSTI]

Dynamical systems with translational or rotational symmetry arise frequently in studies of spatially extended physical systems, such as Navier-Stokes flows on periodic domains. In these cases, it is natural to express the state of the fluid in terms of a Fourier series truncated to a finite number of modes. Here, we study a 4-dimensional two-mode SO(2)-equivariant model of this type, the smallest possible truncation that retains the symmetry but is high-dimensional enough to allow for chaotic dynamics. A crucial step in the analysis of such a system is symmetry reduction. We use the model to illustrate different symmetry-reduction techniques. Its relative equilibria are conveniently determined by rewriting the dynamics in terms of a symmetry-invariant polynomial basis. However, for the analysis of its chaotic dynamics, the `method of slices', which is applicable to very high-dimensional problems, is preferable. We show that a Poincar\\'e section taken on the `slice' can be used to further reduce this flow to what is for all practical purposes a unimodal map. This enables us to systematically determine all relative periodic orbits and their symbolic dynamics up to any desired period. We then present cycle averaging formulas adequate for systems with continuous symmetry and use them to compute dynamical averages using relative periodic orbits. The convergence of such computations is discussed.

Nazmi Burak Budanur; Daniel Borrero-Echeverry; Predrag Cvitanovi?

2015-02-06T23:59:59.000Z

88

Graphical Models for Wide-Area Activity Analysis in Continuous Videos  

E-Print Network [OSTI]

2 Multi-person Activity Recognition in Wide-area Videos 2.1Context Modeling in Continuous Videos Using Graphical Modelsmethod. Given a continuous video with computed tracklets, a

Nayak, Nandita Miyar

2014-01-01T23:59:59.000Z

89

Operator's guide for VAXGAP, a gamma-ray spectrum analysis package  

SciTech Connect (OSTI)

This report describes the gamma-ray analysis program VAXGAP, which has continually evolved at the Idaho National Engineering Laboratory over a period of several years. It is an integrated suite of computer programs for performing analyses of pulse-height spectra from high-resolution gamma-ray spectrometers and assorted support functions. VAXGAP programs operate on Digital Equipment Corporation (DEC) VAX computers running the VMS operating system, and were written in VAX FORTRAN and DEC Digital Command Language (DCL). These programs make use of DEC GKS and ReGIS for graphical output on standard terminals and printers, and DEC windows for graphics on workstations and terminals that support the X Window System protocol. This report addresses the use of VAXGAP for data acquisition and control, energy scale calibration, and real-time analyses of background and sample pulse-height spectra. Also addressed are the creation and use efficiency tables and isotope libraries, manipulation of spectrum files and their contents, and graphical display of on-going acquisitions, saved spectra, and mathematical fits to spectral peaks.

Killian, E.W.; Femec, D.A.

1992-08-01T23:59:59.000Z

90

Technical information report: Plasma melter operation, reliability, and maintenance analysis  

SciTech Connect (OSTI)

This document provides a technical report of operability, reliability, and maintenance of a plasma melter for low-level waste vitrification, in support of the Hanford Tank Waste Remediation System (TWRS) Low-Level Waste (LLW) Vitrification Program. A process description is provided that minimizes maintenance and downtime and includes material and energy balances, equipment sizes and arrangement, startup/operation/maintence/shutdown cycle descriptions, and basis for scale-up to a 200 metric ton/day production facility. Operational requirements are provided including utilities, feeds, labor, and maintenance. Equipment reliability estimates and maintenance requirements are provided which includes a list of failure modes, responses, and consequences.

Hendrickson, D.W. [ed.

1995-03-14T23:59:59.000Z

91

A Pragmatic Business Analysis Model for Telecom Operators  

E-Print Network [OSTI]

.................................................................................................................... 36 Expense to Revenue Ratio .................................................................................................................. 36 E/R Calculation... .................................................................................................................................... 39 E/R Implementation Challenges ......................................................................................................... 40 Subscriber Trend Analysis...

Kwete, Eric Kwete Mwana

2010-05-14T23:59:59.000Z

92

Draft Site-wide Environmental Impact Statement for Continued Operation of Lawrence Livermore National Laboratory and Supplemental Stockpile Stewardship and Management Programmatic Environmental Impact Statement  

SciTech Connect (OSTI)

This ''Site-wide Environmental Impact Statement for Continued Operation of Lawrence Livermore National Laboratory and Supplemental Stockpile Stewardship and Management Programmatic Environmental Impact Statement'' (LLNL SW/SPEIS) describes the purpose and need for agency action for the continued operation of LLNL and analyzes the environmental impacts of these operations. The primary purpose of continuing operation of LLNL is to provide support for the National Nuclear Security Administration's (NNSA's) nuclear weapons stockpile stewardship missions. LLNL, located about 40 miles east of San Francisco, California, is also needed to support other U.S. Department of Energy (DOE) programs and Federal agencies such as the U.S. Department of Defense, Nuclear Regulatory Commission, U.S. Environmental Protection Agency (EPA), and the newly established U.S. Department of Homeland Security. This LLNL SW/SPEIS analyzes the environmental impacts of reasonable alternatives for ongoing and foreseeable future operations, facilities, and activities at LLNL. The reasonable alternatives include the No Action Alternative, Proposed Action, and the Reduced Operation Alternative. The major decision to be made by DOE/NNSA is to select one of the alternatives for the continued operation of the LLNL. As part of the Proposed Action, DOE/NNSA is considering: using additional materials including plutonium on the National Ignition Facility (NIF); increasing the administrative limit for plutonium in the Superblock, which includes the Plutonium Facility, the Tritium Facility, and the Hardened Engineering Test Building; conducting the Integrated Technology Project, using laser isotope separation to provide material for Stockpile Stewardship experiments, in the Plutonium Facility; increasing the material-at-risk limit for the Plutonium Facility; and increasing the Tritium Facility material-at-risk. A discussion of these issues is presented in Section S.5.2, Proposed Action. The ''National Environmental Policy Act'' (NEPA) establishes environmental policy, sets goals, and provides means for implementing the policy. NEPA contains provisions to ensure that Federal agencies adhere to the letter and spirit of the Act. The key provision requires preparation of an environmental impact statement on ''major Federal actions significantly affecting the quality of the human environment'' (40 ''Code of Federal Regulations'' [CFR] {section}1502.3). NEPA ensures that environmental information is available to public officials and citizens before decisions are made and actions are taken (40 CFR {section}1500.1[b]). DOE has a policy to prepare sitewide environmental impact statements documents for certain large, multiple-facility sites such as LLNL (10 CFR {section}1021.330). In August 1992, DOE released the ''Final Environmental Impact Statement and Environmental Impact Report for Continued Operations of Lawrence Livermore National Laboratory and Sandia National Laboratories, Livermore'' (LLNL EIS/EIR). A Record of Decision (ROD) (58 ''Federal Register'' [FR] 6268) was issued in January 1993. With the passage of more than 10 years since the publication of the 1992 LLNL EIS/EIR (DOE/EIS-0157) and because of proposed modifications to existing projects and new programs, NNSA determined that it was appropriate to prepare a new LLNL SW/SPEIS.

N /A

2004-02-27T23:59:59.000Z

93

An operational and institutional modular analysis framework of Transmission and System Operator  

E-Print Network [OSTI]

to internalise network externality in energy price. The nodal pricing is in theory the most efficient method since the power flows externality is internalised in the energy market. It gives an energy price per PLUMEL Energy Department at Supelec Abstract Transmission and System Operator (TSO) is the power flows

Paris-Sud XI, Université de

94

Sensitivity Analysis of Optimal Operation of an Activated Sludge Process Model for Economic Controlled Variable Selection  

E-Print Network [OSTI]

Sensitivity Analysis of Optimal Operation of an Activated Sludge Process Model for Economic operation conducted on an activated sludge process model based on the test-bed benchmark simulation model no structure that leads to optimal economic operation, while promptly rejecting disturbances at lower layers

Skogestad, Sigurd

95

Advanced Pipe Replacement Procedure for a Defective CRDM Housing Nozzle Enables Continued Normal Operation of a Nuclear Power Plant  

SciTech Connect (OSTI)

During the 2003 outage at the Ringhals Nuclear Plant in Sweden, a leak was found in the vicinity of a Control Rod Drive Mechanism (CRDM) housing nozzle at Unit 1. Based on the ALARA principle for radioactive contamination, a unique repair process was developed. The repair system includes utilization of custom, remotely controlled GTAW-robots, a CNC cutting and finishing machine, snake-arm robots and NDE equipment. The success of the repair solution was based on performing the machining and welding operations from the inside of the SCRAM pipe through the CRDM housing since accessibility from the outside was extremely limited. Before the actual pipe replacement procedure was performed, comprehensive training programs were conducted. Training was followed by certification of equipment, staff and procedures during qualification tests in a full scale mock-up of the housing nozzle. Due to the ingenuity of the overall repair solution and training programs, the actual pipe replacement procedure was completed in less than half the anticipated time. As a result of the successful pipe replacement, the nuclear power plant was returned to normal operation. (authors)

Gilmore, Geoff; Becker, Andrew [Climax Portable Machine Tools, Inc., 2712 East Second Street, Newberg, OR 97132 (United States)

2006-07-01T23:59:59.000Z

96

OPERATIONAL MODAL ANALYSIS AND WAVELET TRANSFORMATION FOR DAMAGE IDENTIFICATION IN WIND TURBINE BLADES  

E-Print Network [OSTI]

OPERATIONAL MODAL ANALYSIS AND WAVELET TRANSFORMATION FOR DAMAGE IDENTIFICATION IN WIND TURBINE turbine blade. A trail- ing edge debonding was introduced to a SSP 34 m blade mounted on a test rig. Op-frequency modes. KEYWORDS : Wind Turbine Blades, Debonding, Wavelet Transformation, Operational Modal Analysis

Paris-Sud XI, Université de

97

STANDARD OPERATING PROCEDURES X-Ray Fluorescence Analysis  

E-Print Network [OSTI]

.................................................................................6 3.1 XRF System ........................................................................................................................................7 4.1 Overview of the XRF System................................................................................ 7 4.2 Preparation for XRF Analysis-- XRF Laboratory

Fischer, Emily V.

98

International Microwave Power Institute 127 ANALYSIS OF OPERATIONAL REGIMES  

E-Print Network [OSTI]

for microwave heating. KEY WORDS: Electric field, dissipated power, micro- wave power, model, permittivity heating systems oper ating at 915 MHz is a standard feature protecting the magnetron from reflections LOAD E. Eves and V. Yakovlev Reflections, electric field and dissipated power of a 915 MHz water load

Yakovlev, Vadim

99

Continued Evaluation of the Pulse-Echo Ultrasonic Instrument for Critical Velocity Determination during Hanford Tank Waste Transfer Operations - 12518  

SciTech Connect (OSTI)

The delivery of Hanford double-shell tank waste to the Hanford Tank Waste Treatment and Immobilization Plant (WTP) will be governed by specific Waste Acceptance Criteria that are identified in ICD 19 - Interface Control Document for Waste Feed. Waste must be certified as acceptable before it can be delivered to the WTP. The fluid transfer velocity at which solid particulate deposition occurs in waste slurry transport piping (critical velocity) is a key waste parameter that must be accurately characterized to determine if the waste is acceptable for transfer to the WTP. In 2010 Washington River Protection Solutions and the Pacific Northwest National Laboratory began evaluating the ultrasonic PulseEcho instrument to accurately identify critical velocities in a horizontal slurry transport pipeline for slurries containing particles with a mean particle diameter of >50 micrometers. In 2011 the PulseEcho instrument was further evaluated to identify critical velocities for slurries containing fast-settling, high-density particles with a mean particle diameter of <15 micrometers. This two-year evaluation has demonstrated the ability of the ultrasonic PulseEcho instrument to detect the onset of critical velocity for a broad range of physical and rheological slurry properties that are likely encountered during the waste feed transfer operations between the Hanford tank farms and the WTP. (authors)

Denslow, Kayte M.; Bontha, Jagannadha R.; Adkins, Harold E.; Jenks, Jeromy W.J.; Burns, Carolyn A.; Schonewill, Philip P.; Hopkins, Derek F. [Pacific Northwest National Laboratory, Richland, Washington 99354 (United States); Thien, Michael G.; Wooley, Theodore A. [Washington River Protection Solutions, Richland, Washington 99354 (United States)

2012-07-01T23:59:59.000Z

100

4.6 MATLAB Laboratory Experiment Purpose: This experiment presents the frequency domain analysis of continuous-time  

E-Print Network [OSTI]

4.6 MATLAB Laboratory Experiment Purpose: This experiment presents the frequency domain analysis of continuous-time linear systems using MATLAB. The impulse, step, sinusoidal, and exponential responses. In addition, MATLAB will be used to perform the partial fraction expansion and to find the inverse Laplace

Gajic, Zoran

Note: This page contains sample records for the topic "analysis continued operation" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

POWER GRID DYNAMICS: ENHANCING POWER SYSTEM OPERATION THROUGH PRONY ANALYSIS  

SciTech Connect (OSTI)

Prony Analysis is a technique used to decompose a signal into a series consisting of weighted complex exponentials and promises to be an effi cient way of recognizing sensitive lines during faults in power systems such as the U.S. Power grid. Positive Sequence Load Flow (PSLF) was used to simulate the performance of a simple two-area-four-generator system and the reaction of the system during a line fault. The Dynamic System Identifi cation (DSI) Toolbox was used to perform Prony analysis and use modal information to identify key transmission lines for power fl ow adjustment to improve system damping. The success of the application of Prony analysis methods to the data obtained from PSLF is reported, and the key transmission line for adjustment is identifi ed. Future work will focus on larger systems and improving the current algorithms to deal with networks such as large portions of the Western Electricity Coordinating Council (WECC) power grid.

Ray, C.; Huang, Z.

2007-01-01T23:59:59.000Z

102

Deriving the continuity of maximum-entropy basis functions via variational analysis  

E-Print Network [OSTI]

and V. J. DellaPietra, A maximum entropy approach to naturalJ. and R. K. Bryan, Maximum entropy image reconstruction:Heidelberg, Continuity of maximum-entropy basis functions p

Sukumar, N.; Wets, R. J. -B.

2007-01-01T23:59:59.000Z

103

Analysis, testing, and operation of the MAGI thermal control system  

SciTech Connect (OSTI)

The Aerospace Corporation has completed the development of the Mineral and Gas Identifier (MAGI) sensor - an airborne multi-spectral infrared instrument that is designed to discriminate surface composition and to detect gas emissions from the environment. Sensor performance was demonstrated in a series of flights aboard a Twin Otter aircraft in December 2011 as a stepping stone to a future satellite sensor design. To meet sensor performance requirements the thermal control system was designed to operate the HgCdTe focal plane array (FPA) at 50 K with a 1.79 W heat rejection load to a 44.7 K sink and the optical assembly at 100 K with a 7.5 W heat load to a 82.3 K sink. Two commercial off-theshelf (COTS) Sunpower Stirling cryocoolers were used to meet the instrument’s cooling requirements. A thermal model constructed in Thermal Desktop was used to run parametric studies that guided the mechanical design and sized the two cryocoolers. This paper discusses the development, validation, and operation of the MAGI thermal control system. Detailed energy balances and temperature predictions are presented for various test cases to demonstrate the utility and accuracy of the thermal model. Model inputs included measured values of heat lift as a function of input power and cold tip temperature for the two cryocoolers. These measurements were also used to make predictions of the cool-down behavior from ambient conditions. Advanced heater software was developed to meet unique requirements for both sensor cool-down rate and stability at the set point temperatures.

Yi, Sonny; Hall, Jeffrey L.; Kasper, Brian P. [The Aerospace Corporation, El Segundo, CA 90245 (United States)

2014-01-29T23:59:59.000Z

104

Incorporating operational flexibility into electric generation planning : impacts and methods for system design and policy analysis  

E-Print Network [OSTI]

This dissertation demonstrates how flexibility in hourly electricity operations can impact long-term planning and analysis for future power systems, particularly those with substantial variable renewables (e.g., wind) or ...

Palmintier, Bryan S. (Bryan Stephen)

2013-01-01T23:59:59.000Z

105

2014 Annual Workforce Analysis and Staffing Plan Report- Idaho Operations Office  

Broader source: Energy.gov [DOE]

Managers perform an annual workforce analysis of their organization and develop staffing plans that identify technical capabilities and positions they need to ensure safe operation of defense nuclear facilities.

106

2014 Annual Workforce Analysis and Staffing Plan Report- Savannah River Operations Office  

Broader source: Energy.gov [DOE]

Managers perform an annual workforce analysis of their organization and develop staffing plans that identify technical capabilities and positions they need to ensure safe operation of defense nuclear facilities.

107

2012 Annual Workforce Analysis and Staffing Plan Report- Idaho Operations Office  

Broader source: Energy.gov [DOE]

Managers perform an annual workforce analysis of their organization and develop staffing plans that identify technical capabilities and positions they need to ensure safe operation of defense nuclear facilities.

108

2013 Annual Workforce Analysis and Staffing Plan Report- Richland Operations Office  

Broader source: Energy.gov [DOE]

Managers perform an annual workforce analysis of their organization and develop staffing plans that identify technical capabilities and positions they need to ensure safe operation of defense nuclear facilities.

109

2014 Annual Workforce Analysis and Staffing Plan Report- Richland Operations Office  

Broader source: Energy.gov [DOE]

Managers perform an annual workforce analysis of their organization and develop staffing plans that identify technical capabilities and positions they need to ensure safe operation of defense nuclear facilities.

110

Joint-Frequency Bins versus Conventional Bin Weather Data in Analysis of HVAC System Operation  

E-Print Network [OSTI]

this study the use of joint-frequency bins has relative added value to the analysis of HVAC system operation depending on whether the system is dominated by ventilation loads....

Jones, A.; Baltazar, J. C.; Claridge, D. E.

111

2010 Annual Workforce Analysis and Staffing Plan Report- Savannah River Operations Office  

Broader source: Energy.gov [DOE]

Managers perform an annual workforce analysis of their organization and develop staffing plans that identify technical capabilities and positions they need to ensure safe operation of defense nuclear facilities.

112

2012 Annual Workforce Analysis and Staffing Plan Report- Richland Operations Office  

Broader source: Energy.gov [DOE]

Managers perform an annual workforce analysis of their organization and develop staffing plans that identify technical capabilities and positions they need to ensure safe operation of defense nuclear facilities.

113

2011 Annual Workforce Analysis and Staffing Plan Report- Savannah River Operations Office  

Broader source: Energy.gov [DOE]

Managers perform an annual workforce analysis of their organization and develop staffing plans that identify technical capabilities and positions they need to ensure safe operation of defense nuclear facilities.

114

2011 Annual Workforce Analysis and Staffing Plan Report- Richland Operations Office  

Broader source: Energy.gov [DOE]

Managers perform an annual workforce analysis of their organization and develop staffing plans that identify technical capabilities and positions they need to ensure safe operation of defense nuclear facilities.

115

2011 Annual Workforce Analysis and Staffing Plan Report- Idaho Operations Office  

Broader source: Energy.gov [DOE]

Managers perform an annual workforce analysis of their organization and develop staffing plans that identify technical capabilities and positions they need to ensure safe operation of defense nuclear facilities.

116

2013 Annual Workforce Analysis and Staffing Plan Report- Idaho Operations Office  

Broader source: Energy.gov [DOE]

Managers perform an annual workforce analysis of their organization and develop staffing plans that identify technical capabilities and positions they need to ensure safe operation of defense nuclear facilities.

117

2013 Annual Workforce Analysis and Staffing Plan Report- Savannah River Operations Office  

Broader source: Energy.gov [DOE]

Managers perform an annual workforce analysis of their organization and develop staffing plans that identify technical capabilities and positions they need to ensure safe operation of defense nuclear facilities.

118

2012 Annual Workforce Analysis and Staffing Plan Report- Savannah River Operations Office  

Broader source: Energy.gov [DOE]

Managers perform an annual workforce analysis of their organization and develop staffing plans that identify technical capabilities and positions they need to ensure safe operation of defense nuclear facilities.

119

Preliminary analysis of fission gas behavior and fuel response during an LMFBR operational transient  

SciTech Connect (OSTI)

This summary presents results obtained from a preliminary analysis of gas behavior and oxide fuel response during an LMFBR operational transient. The DiMelfi and Deitrich model is extrapolated to operational transient regimes to delineate brittle versus ductile fuel response modes. All pertinent parameters necessary for application of the DiMelfi and Deitrich model were obtained from the LIFE-3 code.

Liu, Y.Y.

1983-01-01T23:59:59.000Z

120

TRANSIENT HEAT TRANSFER ANALYSIS FOR SRS RADIOACTIVE TANK OPERATION  

SciTech Connect (OSTI)

The primary objective of the present work is to perform a heat balance study for type-I waste tank to assess the impact of using submersible mixer pumps during waste removal. The temperature results calculated by the model will be used to evaluate the temperatures of the slurry waste under various tank operating conditions. A parametric approach was taken to develop a transient model for the heat balance study for type-I waste tanks such as Tank 11, during waste removal by SMP. The tank domain used in the present model consists of two SMP?s for sludge mixing, one STP for the waste removal, cooling coil system with 36 coils, and purge gas system. The sludge waste contained in Tank 11 also has a decay heat load of about 43 W/m{sup 3} mainly due to the emission of radioactive gamma rays. All governing equations were established by an overall energy balance for the tank domain, and they were numerically solved. A transient heat balance model used single waste temperature model, which represents one temperature for the entire waste liquid domain contained in the tank at each transient time.

Lee, S.

2013-06-27T23:59:59.000Z

Note: This page contains sample records for the topic "analysis continued operation" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Continuity of Operations Plan (COOP)  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary)morphinanInformation InInformationCenterResearchCASLNanoporousTestimonyContact Us - News Media Assembling A You

122

Roughness-induced Transient Growth: Continuous-spectrum Receptivity and Secondary Instability Analysis  

E-Print Network [OSTI]

. . . . . . . . . . . . . . . . 6 C. Approach and Organization . . . . . . . . . . . . . . . . . 15 II TRANSIENT GROWTH THEORY . . . . . . . . . . . . . . . . 17 A. Linearized Equations and Continuous Spectrum . . . . . . 18 B. The Receptivity Problem... . . . . . . . . . . . . . . . . . . . 92 C. Far Wake . . . . . . . . . . . . . . . . . . . . . . . . . . . 95 D. Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . 98 VI CONCLUSIONS AND FUTURE WORK . . . . . . . . . . . . . 99 A. Does Path C Exist...

Denissen, Nicholas Allen

2012-07-16T23:59:59.000Z

123

Comparative analysis of continuous-wave surface-plasma negative ion sources with various discharge geometry  

SciTech Connect (OSTI)

Negative ion extraction from continuous-wave (CW) magnetron and semiplanotron discharges was studied and it was compared with that for the source with Penning electrode geometry. The CW negative ion beam up current to 13 mA was extracted from the magnetron source with emission aperture of 3.5 mm in diameter, while the beam with current up to 8 mA was obtained from the semiplanotron source modification. Characteristics of CW magnetron and semiplanotron sources are presented and analyzed.

Belchenko, Yu, E-mail: belchenko@inp.nsk.su [Budker Institute of Nuclear Physics, Siberian Branch of Russian Academy of Sciences, Novosibirsk (Russian Federation)] [Budker Institute of Nuclear Physics, Siberian Branch of Russian Academy of Sciences, Novosibirsk (Russian Federation); Sanin, A.; Sotnikov, O. [Budker Institute of Nuclear Physics, Siberian Branch of Russian Academy of Sciences, Novosibirsk (Russian Federation) [Budker Institute of Nuclear Physics, Siberian Branch of Russian Academy of Sciences, Novosibirsk (Russian Federation); Novosibirsk State University, Novosibirsk, 630090 (Russian Federation)

2014-02-15T23:59:59.000Z

124

Analysis of continuously rotating quadrupole focusing channels using generalized Courant-Snyder theory  

SciTech Connect (OSTI)

By extending the recently developed generalized Courant-Snyder theory for coupled transverse beam dynamics, we have constructed the Gaussian beam distribution and its projections with arbitrary mode emittance ratios. The new formulation has been applied to a continuously-rotating quadrupole focusing channel because the basic properties of this channel are known theoretically and could also be investigated experimentally in a compact setup such as the linear Paul trap configuration. The new formulation retains a remarkably similar mathematical structure to the original Courant-Snyder theory, and thus provides a powerful theoretical tool to investigate coupled transverse beam dynamics in general and more complex linear focusing channels.

Chung, Moses; Qin, Hong; Gilson, Erik; Davidson, Ronald C.

2013-01-01T23:59:59.000Z

125

Experimental demonstration of differing impacts of pulsed and continuous operation of a deuterium-tritium neutron source on induced radioactivity in the context of ITER  

SciTech Connect (OSTI)

The work reported herein was conducted in response to an ITER Task to demonstrate experimentally that pulsed and continous operations of a D-T neutron source lead, in general, to differing impacts on inventory of induced radioactivity, on one hand, and to verify calculational methods, on the other. In a series of experiments conducted for the purpose, half lives of observed radioisotopes varied from 1 minute ({sup 25}Na) to 271 days ({sup 57}Co). Relatively short pulse lengths, 1 minute to 3 minute duration, were chosen. A pneumatic transport system was employed to transport foils of niobium, iron, aluminum, vanadium, nickel, and magnesium for irradiation close to the D-T neutron source. Three duty factors and two kinds of power levels were used for various neutron pulse trains. The experimental data was processed to obtain ratio of inventories in pulsed to continuous operation scenarios for each of the observed radioisotope. We observe a large reduction in radioactive inventories for values of t{sub 1/2}/p (half life/pulse duration) lying in the range of 1 to 10. Interestingly, random power pulse trains show even larger reduction in radioactive inventory: the ratio of inventories drops to approx.0.14 for t{sub 1/2}/p = 3.15 ({sup 27}Mg) for a duty factor of 20% and a train of 10 pulses, whereas it would have hit a minimum of 0.33 for t{sub 1/2}/p = 3.53 for constant power level. 14 refs., 10 figs., 1 tab.

Kumar, A.; Youssef, M.Z.; Abdou, M.A. [Univ. of California, Los Angeles, CA (United States); Ikeda, Yujiro; Uno, Yoshitomo; Maekawa, Hiroshi [Japan Atomic Energy Research Inst., Ibaraki (Japan)

1996-12-31T23:59:59.000Z

126

Geographic and Operational Site Parameters List (GOSPL) for the 2004 Composite Analysis  

SciTech Connect (OSTI)

This report briefly describes each of the key data fields, including the source(s) of data, and provides the resulting inputs to be used for the 2004 Composite Analysis. A master spreadsheet termed the Geographic and Operational Site Parameters List (GOSPL) was assembled to facilitate the generation of keyword input files containing general information on each waste site, its operational/disposal history, and its environmental settings (past, current, and future).

Last, George V.; Nichols, William E.; Kincaid, Charles T.

2004-07-01T23:59:59.000Z

127

Process hazards analysis (PrHA) program, bridging accident analyses and operational safety  

SciTech Connect (OSTI)

Recently the Final Safety Analysis Report (FSAR) for the Plutonium Facility at Los Alamos National Laboratory, Technical Area 55 (TA-55) was revised and submitted to the US. Department of Energy (DOE). As a part of this effort, over seventy Process Hazards Analyses (PrHAs) were written and/or revised over the six years prior to the FSAR revision. TA-55 is a research, development, and production nuclear facility that primarily supports US. defense and space programs. Nuclear fuels and material research; material recovery, refining and analyses; and the casting, machining and fabrication of plutonium components are some of the activities conducted at TA-35. These operations involve a wide variety of industrial, chemical and nuclear hazards. Operational personnel along with safety analysts work as a team to prepare the PrHA. PrHAs describe the process; identi fy the hazards; and analyze hazards including determining hazard scenarios, their likelihood, and consequences. In addition, the interaction of the process to facility systems, structures and operational specific protective features are part of the PrHA. This information is rolled-up to determine bounding accidents and mitigating systems and structures. Further detailed accident analysis is performed for the bounding accidents and included in the FSAR. The FSAR is part of the Documented Safety Analysis (DSA) that defines the safety envelope for all facility operations in order to protect the worker, the public, and the environment. The DSA is in compliance with the US. Code of Federal Regulations, 10 CFR 830, Nuclear Safety Management and is approved by DOE. The DSA sets forth the bounding conditions necessary for the safe operation for the facility and is essentially a 'license to operate.' Safely of day-to-day operations is based on Hazard Control Plans (HCPs). Hazards are initially identified in the PrI-IA for the specific operation and act as input to the HCP. Specific protective features important to worker safety are incorporated so the worker can readily identify the safety parameters of the their work. System safety tools such as Preliminary Hazard Analysis, What-If Analysis, Hazard and Operability Analysis as well as other techniques as necessary provide the groundwork for both determining bounding conditions for facility safety, operational safety, and day-to-clay worker safety.

Richardson, J. A. (Jeanne A.); McKernan, S. A. (Stuart A.); Vigil, M. J. (Michael J.)

2003-01-01T23:59:59.000Z

128

Ex post power economic analysis of record of decision operational restrictions at Glen Canyon Dam.  

SciTech Connect (OSTI)

On October 9, 1996, Bruce Babbitt, then-Secretary of the U.S. Department of the Interior signed the Record of Decision (ROD) on operating criteria for the Glen Canyon Dam (GCD). Criteria selected were based on the Modified Low Fluctuating Flow (MLFF) Alternative as described in the Operation of Glen Canyon Dam, Colorado River Storage Project, Arizona, Final Environmental Impact Statement (EIS) (Reclamation 1995). These restrictions reduced the operating flexibility of the hydroelectric power plant and therefore its economic value. The EIS provided impact information to support the ROD, including an analysis of operating criteria alternatives on power system economics. This ex post study reevaluates ROD power economic impacts and compares these results to the economic analysis performed prior (ex ante) to the ROD for the MLFF Alternative. On the basis of the methodology used in the ex ante analysis, anticipated annual economic impacts of the ROD were estimated to range from approximately $15.1 million to $44.2 million in terms of 1991 dollars ($1991). This ex post analysis incorporates historical events that took place between 1997 and 2005, including the evolution of power markets in the Western Electricity Coordinating Council as reflected in market prices for capacity and energy. Prompted by ROD operational restrictions, this analysis also incorporates a decision made by the Western Area Power Administration to modify commitments that it made to its customers. Simulated operations of GCD were based on the premise that hourly production patterns would maximize the economic value of the hydropower resource. On the basis of this assumption, it was estimated that economic impacts were on average $26.3 million in $1991, or $39 million in $2009.

Veselka, T. D.; Poch, L. A.; Palmer, C. S.; Loftin, S.; Osiek, B; Decision and Information Sciences; Western Area Power Administration

2010-07-31T23:59:59.000Z

129

Continuous time random walk analysis of solute transport in fractured porous media  

SciTech Connect (OSTI)

The objective of this work is to discuss solute transport phenomena in fractured porous media, where the macroscopic transport of contaminants in the highly permeable interconnected fractures can be strongly affected by solute exchange with the porous rock matrix. We are interested in a wide range of rock types, with matrix hydraulic conductivities varying from almost impermeable (e.g., granites) to somewhat permeable (e.g., porous sandstones). In the first case, molecular diffusion is the only transport process causing the transfer of contaminants between the fractures and the matrix blocks. In the second case, additional solute transfer occurs as a result of a combination of advective and dispersive transport mechanisms, with considerable impact on the macroscopic transport behavior. We start our study by conducting numerical tracer experiments employing a discrete (microscopic) representation of fractures and matrix. Using the discrete simulations as a surrogate for the 'correct' transport behavior, we then evaluate the accuracy of macroscopic (continuum) approaches in comparison with the discrete results. However, instead of using dual-continuum models, which are quite often used to account for this type of heterogeneity, we develop a macroscopic model based on the Continuous Time Random Walk (CTRW) framework, which characterizes the interaction between the fractured and porous rock domains by using a probability distribution function of residence times. A parametric study of how CTRW parameters evolve is presented, describing transport as a function of the hydraulic conductivity ratio between fractured and porous domains.

Cortis, Andrea; Cortis, Andrea; Birkholzer, Jens

2008-06-01T23:59:59.000Z

130

ANALYSIS OF EMERGING NDE TECHNIQUES: METHODS FOR EVALUATING AND IMPLEMENTING CONTINUOUS ONLINE MONITORING  

SciTech Connect (OSTI)

One of the goals of the program for the proactive management of materials degradation (PMMD) is to manage proactively the in-service degradation of metallic components in aging NPPs. As some forms of degradation, such as stress corrosion cracking, are characterized by a long initiation time followed by a rapid growth phase, new inspection or monitoring technologies may be required. New nondestructive evaluation (NDE) techniques that may be needed include techniques to find stress corrosion cracking (SCC) precursors, on-line monitoring techniques to detect cracks as they initiate and grow, as well as advances in NDE technologies. This paper reports on the first part of the development of a methodology to determine the effectiveness of these emerging NDE techniques for managing metallic degradation. This methodology will draw from experience derived from evaluating techniques that have "emerged" in the past. The methodology will follow five stages: a definition of inspection parameters, a technical evaluation, laboratory testing, round robin testing, and the design of a performance demonstration program. This methodology will formalize the path taken for previous techniques and set a predictable course for future NDE techniques. This paper then applies the expert review section of the methodology to the acoustic emission technique to evaluate the use of acoustic emission in performing continuous online monitoring of reactor components.

Cumblidge, Stephen E.; Doctor, Steven R.; Bond, Leonard J.; Taylor, Theodore T.; Lupold, Timothy R.; Hull, Amy; Malik, Shah

2009-08-05T23:59:59.000Z

131

Data Collection for Class-8 Long-Haul Operations and Fuel Economy Analysis  

E-Print Network [OSTI]

Data Collection for Class-8 Long-Haul Operations and Fuel Economy Analysis A s part of a long Research Company ­ Michelin), have collected data and information related to Class-8 heavy truck long-haul-world data for the heavy-truck research community. An initial fuel efficiency study was conducted with regard

132

Structural Analysis Results of Thermal, Operating and Seismic Analysis for Hanford Single-Shell Tank Integrity - 12261  

SciTech Connect (OSTI)

Since Hanford's 149 Single-Shell Tanks (SSTs) are well beyond their design life, the U.S. Department of Energy has commissioned a state of the art engineering analysis to assess the structural integrity of the tanks to ensure that they are fit for service during the cleanup and closure phase. The structural integrity analysis has several challenging factors. There are four different tank sizes in various configurations that require analysis. Within each tank type there are different waste level and temperature histories, soil overburden depths, tank floor arrangements, riser sizes and locations, and other on-tank structures that need to be addressed. Furthermore, soil properties vary throughout the tank farms. This paper describes the structural integrity analysis that was performed for the SSTs using finite element models that incorporate the detailed design features of each tank type. The analysis was performed with two different models: an ANSYS static model for the Thermal and Operating Loads Analysis, and an ANSYS dynamic model for the seismic analysis. The TOLA analyses simulate the waste level and thermal history and it included a matrix of analysis cases that bounded the material property uncertainties. The TOLA also predicts the occurrence of concrete thermal degradations and cracking, reinforcement yielding, and soil plasticity. The seismic analysis matrix included uncertainty in waste properties, waste height and the soil modulus. In seismic analysis the tank concrete was modeled as a linear elastic material that was adjusted for the present day degraded conditions. Also, the soil was treated as a linear elastic material while special modeling techniques were used to avoid soil arching and achieve proper soil pressure on the tank walls. Seismic time histories in both the horizontal and vertical directions were applied to the seismic model. Structural demands from both Thermal and Operating Loads Analysis and seismic models were extracted in the form of section forces and moments for sections throughout the tank under the appropriate load combinations. These demands were evaluated against the American Concrete Institute (ACI) code requirements for nuclear safety-related concrete structures as defined in ACI-349-06. Structural integrity analysis of Hanford's Type II and Type III Single-Shell Tanks (SSTs) was performed using finite element models (ANSYS software) that incorporate the detailed design features of each tank type. The analysis was performed with two different models: a static model for the Thermal and Operating Loads Analysis, and a dynamic model for the seismic analysis. Structural demands from both Thermal and Operating Loads Analysis and seismic models were evaluated against the American Concrete Institute (ACI) code requirements for nuclear safety-related concrete structures as defined in ACI-349-06. The ratio of demand to capacity (D/C) was reported as a measure of structural integrity for the applicable ACI-349-06 load combinations. Although the Type II and Type III analysis matrix showed varying demands depending on the material combinations, all of the tank regions that are critical to structural stability passed the ACI 349-06 acceptance criteria. This was true for the conservative combination of maximum recorded thermal loads and maximum soil overburden depth combined with the analysis matrix of bounding material property combinations. (authors)

Pilli, Siva P.; Rinker, Michael W. [Pacific Northwest National Laboratory, P.O. Box 999, Richland, WA 99352 (United States)

2012-07-01T23:59:59.000Z

133

EIS-0426: Site-Wide Environmental Impact Statement for Continued Operation of the Department of Energy / National Nuclear Security Administration Nevada National Security Site and Off-Site Locations in the State of Nevada  

Broader source: Energy.gov [DOE]

This Site-Wide EIS evaluates the potential environmental impacts of proposed alternatives for continued management and operation of the Nevada National Security Site (NNSS) (formerly known as the Nevada Test Site) and other U.S. Department of Energy/National Nuclear Security Administration (DOE/NNSA)-managed sites in Nevada.

134

Safety analysis -- 200 Area Savannah River Plant, F-Canyon Operations. Supplement 4  

SciTech Connect (OSTI)

The F-Canyon facility is located in the 200 Separations Area and uses the Purex process to recover plutonium from reactor-irradiated uranium. The irradiated uranium is normally in the form of solid or hollow cylinders called slugs. These slugs are encased in aluminum cladding and are sent to the F-Canyon from the Savannah River Plant (SRP) reactor areas or from the Receiving Basin for Offsite Fuels (RBOF). This Safety Analysis Report (SAR) documents an analysis of the F-Canyon operations and is an update to a section of a previous SAR. The previous SAR documented an analysis of the entire 200 Separations Area operations. This SAR documents an analysis of the F-Canyon and is one of a series of documents for the Separations Area as specified in the Savannah River Implementation Plans. A substantial amount of the information supporting the conclusions of this SAR is found in the Systems Analysis. Some F-Canyon equipment has been updated during the time between the Systems Analysis and this SAR and a complete description of this equipment is included in this report. The primary purpose of the analysis was to demonstrate that the F-Canyon can be operated without undue risk to onsite or offsite populations and to the environment. In this report, risk is defined as the expected frequency of an accident, multiplied by the resulting radiological consequence in person-rem. The units of risk for radiological dose are person-rem/year. Maximum individual exposure values have also been calculated and reported.

Beary, M.M.; Collier, C.D.; Fairobent, L.A.; Graham, R.F.; Mason, C.L.; McDuffee, W.T.; Owen, T.L.; Walker, D.H.

1986-02-01T23:59:59.000Z

135

Sampling and analysis plan for the site characterization of the waste area Grouping 1 groundwater operable unit at Oak Ridge National Laboratory  

SciTech Connect (OSTI)

Waste Area Grouping (WAG) 1 at Oak Ridge National Laboratory (ORNL) includes all of the former ORNL radioisotope research, production, and maintenance facilities; former waste management areas; and some former administrative buildings. Site operations have contaminated groundwater, principally with radiological contamination. An extensive network of underground pipelines and utilities have contributed to the dispersal of contaminants to a known extent. In addition, karst geology, numerous spills, and pipeline leaks, together with the long and varied history of activities at specific facilities at ORNL, complicate contaminant migration-pathway analysis and source identification. To evaluate the extent of contamination, site characterization activity will include semiannual and annual groundwater sampling, as well as monthly water level measurements (both manual and continuous) at WAG 1. This sampling and analysis plan provides the methods and procedures to conduct site characterization for the Phase 1 Remedial Investigation of the WAG 1 Groundwater Operable Unit.

NONE

1994-11-01T23:59:59.000Z

136

Continuous wavelet transform analysis and modal location analysis acoustic emission source location for nuclear piping crack growth monitoring  

SciTech Connect (OSTI)

Source location is an important feature of acoustic emission (AE) damage monitoring in nuclear piping. The ability to accurately locate sources can assist in source characterisation and early warning of failure. This paper describe the development of a novelAE source location technique termed 'Wavelet Transform analysis and Modal Location (WTML)' based on Lamb wave theory and time-frequency analysis that can be used for global monitoring of plate like steel structures. Source location was performed on a steel pipe of 1500 mm long and 220 mm outer diameter with nominal thickness of 5 mm under a planar location test setup using H-N sources. The accuracy of the new technique was compared with other AE source location methods such as the time of arrival (TOA) techniqueand DeltaTlocation. Theresults of the study show that the WTML method produces more accurate location resultscompared with TOA and triple point filtering location methods. The accuracy of the WTML approach is comparable with the deltaT location method but requires no initial acoustic calibration of the structure.

Mohd, Shukri [Nondestructive Testing Group, Industrial Technology Division, Malaysian Nuclear Agency, 43000, Bangi, Selangor (Malaysia); Holford, Karen M.; Pullin, Rhys [Cardiff School of Engineering, Cardiff University, Queen's Buildings, The Parade, CARDIFF CF24 3AA (United Kingdom)

2014-02-12T23:59:59.000Z

137

Office of Analysis and Evaluation of Operational Data 1989 annual report, Power reactors  

SciTech Connect (OSTI)

The annual report of the US Nuclear Regulatory Commission's Office for Analysis and Evaluation of Operational Data (AEOD) is devoted to the activities performed during 1989. The report is published in two separate parts. This document, NUREG-1272, Vol. 4, No. 1, covers power reactors and presents an overview of the operating experience of the nuclear power industry from the NRC perspective, including comments about the trends of some key performance measures. The report also includes the principal findings and issues identified in AEOD studies over the past year and summarizes information from such sources as licensee event reports, diagnostic evaluations, and reports to the NRC's Operations Center. This report also compiles the status of staff actions resulting from previous Incident Investigation Team (IIT) reports. 16 figs., 9 tabs.

None

1990-07-01T23:59:59.000Z

138

Report to the US Nuclear Regulatory Commission on Analysis and Evaluation of Operational Data, 1986  

SciTech Connect (OSTI)

This annual report of the US Nuclear Regulatory Commission's Office for Analysis and Evaluation of Operational Data (AEOD) is devoted to the activities performed during calendar year 1986. Comments and observations are provided on operating experience at nuclear power plants and other NRC licensees, including results from selected AEOD studies; summaries of abnormal occurrences involving US nuclear plants; reviews of licensee event reports and their quality, reactor scram experience from 1984 to 1986, engineered safety features actuations, and the trends and patterns analysis program; and assessments of nonreactor and medical misadministration events. In addition, the report provides the year-end status of all recommendations included in AEOD studies, and listings of all AEOD reports issued from 1980 through 1986.

none,

1987-05-01T23:59:59.000Z

139

Life Cycle cost Analysis of Waste Heat Operated Absorption Cooling Systems for Building HVAC Applications  

E-Print Network [OSTI]

effect from CO2 emission resulting from the combustion of fossil fuels in utility power plants and the use of chlorofluorocarbon refrigerants, which is currently thought to affect depletion of the ozone layer. The ban on fluorocarbon fluids has been...LIFE CYCLE COST ANALYSIS OF WASTE HEAT OPERATED ABSORPTION COOLING SYSTEMS FOR BUILDING HVAC APPLICATIONS V. Murugavel and R. Saravanan Refrigeration and Air conditioning Laboratory Department of Mechanical Engineering, Anna University...

Saravanan, R.; Murugavel, V.

2010-01-01T23:59:59.000Z

140

Introduction to continuous emission monitoring programs. Final report  

SciTech Connect (OSTI)

This document provides a general introduction to continuous emission monitoring for those persons not previously involved in this field. Information is presented on continuous opacity monitoring, as well as instrumental and alternative monitoring techniques for SO2 and NOx (i.e., continuous wet-chemical measurement methods and fuel sampling and analysis methods). This document presents an outline and review of the fundamental concepts, terminology, and procedures used in a continuous emission monitoring program. Also presented are selected technical details necessary to understand the operation of emission monitors, the use of continuous emission monitoring data by air pollution control agencies, and references to other available documents which provide additional information.

Peeler, J.W.

1983-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "analysis continued operation" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

A two-dimensional finite element thermomechanical approach to a global stress-strain analysis of steel continuous casting  

E-Print Network [OSTI]

of steel continuous casting Michel Bellet, Alban Heinrich Ecole des Mines de Paris, Centre de Mise en Forme.bellet@ensmp.fr Synopsis This paper addresses the two-dimensional finite element simulation of steel continuous casting state (temperature, deformation, stresses) of steel all along the continuous casting machine. Both plane

Boyer, Edmond

142

Sandia National Laboratories: Continuous Reliability Enhancement...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

StandardsContinuous Reliability Enhancement for Wind (CREW) Database and Analysis Program Continuous Reliability Enhancement for Wind (CREW) Database and Analysis Program 2013 CREW...

143

Continual Learning  

Broader source: Energy.gov [DOE]

Continual Learning is a change initiative which is used to help develop and grow a learning culture within DOE.

144

Analysis of the Impact of Balancing Area Cooperation on the Operation of WECC and the Compounding Effect of Wind and Solar Generation  

SciTech Connect (OSTI)

It is the intent of this analysis to examine the operational benefits of increased cooperation between a large number of WECC operating regions.

Jordan, G.; Piwko, D.

2013-02-01T23:59:59.000Z

145

Process systems engineering of continuous pharmaceutical manufacturing  

E-Print Network [OSTI]

Continuous manufacturing offers a number of operational and financial benefits to pharmaceutical companies. This research examines the critical blending step for continuous pharmaceutical manufacturing and the characteristics ...

Abel, Matthew J

2010-01-01T23:59:59.000Z

146

Designing and Operating Through Compromise: Architectural Analysis of CKMS for the Advanced Metering Infrastructure  

SciTech Connect (OSTI)

Compromises attributable to the Advanced Persistent Threat (APT) highlight the necessity for constant vigilance. The APT provides a new perspective on security metrics (e.g., statistics based cyber security) and quantitative risk assessments. We consider design principals and models/tools that provide high assurance for energy delivery systems (EDS) operations regardless of the state of compromise. Cryptographic keys must be securely exchanged, then held and protected on either end of a communications link. This is challenging for a utility with numerous substations that must secure the intelligent electronic devices (IEDs) that may comprise complex control system of systems. For example, distribution and management of keys among the millions of intelligent meters within the Advanced Metering Infrastructure (AMI) is being implemented as part of the National Smart Grid initiative. Without a means for a secure cryptographic key management system (CKMS) no cryptographic solution can be widely deployed to protect the EDS infrastructure from cyber-attack. We consider 1) how security modeling is applied to key management and cyber security concerns on a continuous basis from design through operation, 2) how trusted models and key management architectures greatly impact failure scenarios, and 3) how hardware-enabled trust is a critical element to detecting, surviving, and recovering from attack.

Duren, Mike [Sypris Electronics, LLC] [Sypris Electronics, LLC; Aldridge, Hal [ORNL] [ORNL; Abercrombie, Robert K [ORNL] [ORNL; Sheldon, Frederick T [ORNL] [ORNL

2013-01-01T23:59:59.000Z

147

Operations and compositions in transrecursive operators  

SciTech Connect (OSTI)

The present study is a continuation of a study focusing on introduction and analysis of operations on transrecursive operators, which are similar to the operators considered in the theory of algorithms. Such operations may be standard product of algorithms) or special ({alpha}-disjunction and {alpha}-iteration. In some respects, these operations in the class of transrecursive operators are similar to their traditional analogs. In other respects, however, they are essentially different. For instance, they may have different types and modes. Specific features of operations on transrecursive operators are attributable to explicit omission of some restrictions on their construction compared with the construction of algorithms. The standard approaches to mathematical modeling of the concept of algorithm assume a number of essential restrictions. Specifically, they assume finiteness of (1) the input data arriving during a finite time interval; (2) the list of rules underlying the operations of the algorithm; (3) the transformations executed by a single operation; (4) the description of each rule; (5) the time to execute one operation; (6) the time to execute one operation; (7) the number of cycles that the algorithm executes in order to realize the mapping. In application to Turing machines, these restrictions imply finiteness of the initial word, finiteness of the command table of the read head, and ultimate stopping when the result is obtained after finitely many steps. Various classes of transrecursive operators are constructed by dropping various combinations of the {open_quotes}finiteness{close_quotes} restrictions. Two classes of transrecursive operators - the limit (inductive) Turing machines and transalgorithms - have been obtained by dropping respectively the assumption of finiteness of the number of execution cycles and the assumption of finiteness of the list of rules.

Burgin, M.S.; Borodyanskii, Yu.M.

1995-03-01T23:59:59.000Z

148

An operational analysis of protected-permitted lead-lag left-turn phasing  

E-Print Network [OSTI]

Chair of Advisory Committee: Dr. Daniel B. Fambro This thesis documents an operational analysis of a special type of protected- permitted lead-lag left-turn phasing sequence developed and used by traffic engineers in Dallas, Texas. This phasing, known... as the Dallas phasing, does not follow existing standards for left-turn phasing set forth in the Manual for Uniform Trajfic Control Devices (MUTCD). The objective of this research was to determine whether existing left-turn models can be used to analyze...

Gaston, Gilmer D

2012-06-07T23:59:59.000Z

149

High-Performance Computing for Real-Time Grid Analysis and Operation  

SciTech Connect (OSTI)

Power grids worldwide are undergoing an unprecedented transition as a result of grid evolution meeting information revolution. The grid evolution is largely driven by the desire for green energy. Emerging grid technologies such as renewable generation, smart loads, plug-in hybrid vehicles, and distributed generation provide opportunities to generate energy from green sources and to manage energy use for better system efficiency. With utility companies actively deploying these technologies, a high level of penetration of these new technologies is expected in the next 5-10 years, bringing in a level of intermittency, uncertainties, and complexity that the grid did not see nor design for. On the other hand, the information infrastructure in the power grid is being revolutionized with large-scale deployment of sensors and meters in both the transmission and distribution networks. The future grid will have two-way flows of both electrons and information. The challenge is how to take advantage of the information revolution: pull the large amount of data in, process it in real time, and put information out to manage grid evolution. Without addressing this challenge, the opportunities in grid evolution will remain unfulfilled. This transition poses grand challenges in grid modeling, simulation, and information presentation. The computational complexity of underlying power grid modeling and simulation will significantly increase in the next decade due to an increased model size and a decreased time window allowed to compute model solutions. High-performance computing is essential to enable this transition. The essential technical barrier is to vastly increase the computational speed so operation response time can be reduced from minutes to seconds and sub-seconds. The speed at which key functions such as state estimation and contingency analysis are conducted (typically every 3-5 minutes) needs to be dramatically increased so that the analysis of contingencies is both comprehensive and real time. An even bigger challenge is how to incorporate dynamic information into real-time grid operation. Today’s online grid operation is based on a static grid model and can only provide a static snapshot of current system operation status, while dynamic analysis is conducted offline because of low computational efficiency. The offline analysis uses a worst-case scenario to determine transmission limits, resulting in under-utilization of grid assets. This conservative approach does not necessarily lead to reliability. Many times, actual power grid scenarios are not studied, and they will push the grid over the edge and resulting in outages and blackouts. This chapter addresses the HPC needs in power grid analysis and operations. Example applications such as state estimation and contingency analysis are given to demonstrate the value of HPC in power grid applications. Future research directions are suggested for high performance computing applications in power grids to improve the transparency, efficiency, and reliability of power grids.

Huang, Zhenyu; Chen, Yousu; Chavarría-Miranda, Daniel

2013-10-31T23:59:59.000Z

150

Office for Analysis and Evaluation of Operational Data 1990 annual report  

SciTech Connect (OSTI)

The annual report of the US Nuclear Regulatory Commission's Office for Analysis and Evaluation of Operational Data (AEOD) is devoted to the activities performed during 1990. The report is published in two separate parts. This document NUREG-1272, Vol. 5, No. 1, covers power reactors and presents an overview of the operating experience of the nuclear power industry from the NRC perspective, including comments about the trends of some key performance measures. The report also includes the principal findings and issues identified in AEOD studies over the past year and summarizes information from such sources as licensee event reports, diagnostic evaluations, and reports to the NRC's Operations Center. NUREG-1272, Vol.5, No. 2, covers nonreactors and presents a review of the events and concerns during 1990 associated with the use of licensed material in nonreactor applications, such as personnel overexposures and medical misadministrations. The reports contain a discussion of the Incident Investigation Team program and summarize the Incident Investigation Team and Augmented Inspection Team reports for that group of licensees. Each volume contains a list of the AEOD reports issued for 1980 through 1990. 9 figs., 8 tabs.

None

1991-07-01T23:59:59.000Z

151

Office for Analysis and Evaluation of Operational Data. 1992 annual report: Nonreactors: Volume 7, No. 2  

SciTech Connect (OSTI)

The annual report of the US Nuclear Regulatory Commission`s Office for Analysis and Evaluation of Operational Data (AEOD) is devoted to the activities performed during 1992. The report is published in two separate parts. NUREG-1272, Vol. 7, No. 1, covers power reactors and presents an overview of the operating experience of the nuclear power industry from the NRC perspective, including comments about the trends of some key performance measures. The report also includes the principal findings and issues identified in AEOD studies over the past year and summarizes information from such sources as licensee event reports, diagnostic evaluations, and reports to the NRC`s Operations Center. NUREG-1272, Vol. 7, No. 2, covers nonreactors and presents a review of the events and concerns during 1992 associated with the use of licensed material in nonreactor applications, such as personnel overexposures and medical misadministrations. Both reports also contain a discussion of the Incident Investigation Team program and summarize both the Incident Investigation Team and Augmented Inspection Team reports. Each volume contains a list of the AEOD reports issued for 1981--1992.

Not Available

1993-10-01T23:59:59.000Z

152

Office for Analysis and Evaluation of Operational Data 1996 annual report. Volume 10, Number 1: Reactors  

SciTech Connect (OSTI)

This annual report of the US Nuclear Regulatory Commission`s Office for Analysis and Evaluation of Operational Data (AEOD) describes activities conducted during 1996. The report is published in three parts. NUREG-1272, Vol. 10, No. 1, covers power reactors and presents an overview of the operating experience of the nuclear power industry from the NRC perspective, including comments about trends of some key performance measures. The report also includes the principal findings and issues identified in AEOD studies over the past year and summarizes information from such sources as licensee event reports and reports to the NRC`s Operations Center. NUREG-1272, Vol. 10, No. 2, covers nuclear materials and presents a review of the events and concerns during 1996 associated with the use of licensed material in nonreactor applications, such as personnel overexposures and medical misadministrations. Both reports also contain a discussion of the Incident Investigation Team program and summarize both the Incident Investigation Team and Augmented Inspection Team reports. Each volume contains a list of the AEOD reports issued from CY 1980 through 1996. NUREG-1272, Vol. 10, No. 3, covers technical training and presents the activities of the Technical Training Center in support of the NRC`s mission in 1996.

NONE

1997-12-01T23:59:59.000Z

153

Running time variability and resource allocation : a data-driven analysis of high-frequency bus operations  

E-Print Network [OSTI]

Running time variability is one of the most important factors determining service quality and operating cost of high-frequency bus transit. This research aims to improve performance analysis tools currently used in the bus ...

Sánchez-Martínez, Gabriel Eduardo

2013-01-01T23:59:59.000Z

154

Analysis of 2011 Meteorological Data from the Knolls Atomic Power Laboratory and Kesselring Site Operations Facilities  

SciTech Connect (OSTI)

Both the Knolls Atomic Power Laboratory (KAPL) in Schenectady, NY and the Kesselring Site Operations (KSO) facility near Ballston Spa, NY are required to estimate the effects of hypothetical emissions of radiological material from their respective facilities by the US Environmental Protection Agency (EPA), which regulates these facilities. An atmospheric dispersion model known as CAP88, which was developed and approved by the EPA for such purposes, is used by KAPL and KSO to meet this requirement. CAP88 calculations over a given time period are based on statistical data on the meteorological conditions for that period. Both KAPL and KSO have on-site meteorological towers which take atmospheric measurements at a frequency ideal for EPA regulatory model input. However, an independent analysis and processing of the meteorological data from each tower is required to derive a data set appropriate for use in the CAP88 model. The National Atmospheric Release Advisory Center (NARAC) was contracted by KAPL to process the on-site data for the calendar year 2011. The purpose of this document is to: (1) summarize the procedures used in the preparation/analysis of the 2011 meteorological data; and (2) document adherence of these procedures to the guidance set forth in 'Meteorological Monitoring Guidance for Regulatory Modeling Applications', EPA document - EPA-454/R-99-005 (EPA-454). This document outlines the steps in analyzing and processing meteorological data from the Knolls Atomic Power Laboratory and Kesselring Site Operations facilities into a format that is compatible with the steady state dispersion model CAP88. This process is based on guidance from the EPA regarding the preparation of meteorological data for use in regulatory dispersion models. The analysis steps outlined in this document can be easily adapted to process data sets covering time period other than one year. The procedures will need to be modified should the guidance in EPA-454 be updated or revised.

Aluzzi, F J

2012-02-27T23:59:59.000Z

155

Integrated Molecular Analysis Indicates Undetectable Change in DNA Damage in Mice after Continuous Irradiation at ~ 400-fold Natural Background Radiation  

E-Print Network [OSTI]

Background: In the event of a nuclear accident, people are exposed to elevated levels of continuous low dose-rate radiation. Nevertheless, most of the literature describes the biological effects of acute radiation.

Olipitz, Werner

156

GTRI Remote Monitoring System: Training and Operational Needs Assessment Analysis Report  

SciTech Connect (OSTI)

The mission of the United States Department of Energy (DOE) National Nuclear Security Administrations (NNSA's) Global Threat Reduction Initiative (GTRI) is to identify, secure, recover and facilitate the disposition of vulnerable nuclear and high-risk radioactive materials around the world that pose a threat to the United States and the international community. The GTRI's unique mission to reduce and protect vulnerable nuclear and radiological materials located at civilian sites worldwide directly addresses recommendations of the 9/11 Commission1, and is a vital part of the President's National Security Strategy and the Global Initiative. The GTRI Remote Monitoring System (RMS) is a standalone security system that includes radiation and tamper alarms, and CCTV; which can be transmitted securely over the Internet to multiple on-site and off-site locations. Through our experiences during installation of the system at 162 sites, plus feedback received from Alarm Response Training course participants, site input to project teams and analysis of trouble calls; indications were that current system training was lacking and inconsistent. A survey was undertaken to gather information from RMS users across the nation, to evaluate the current level of training and determine what if any improvements needed to be made. Additional questions were focused on the operation of the RMS software. The training survey was initially sent electronically to 245 users at the RMS sites and achieved a 37.6% return rate. Analysis of the resulting data revealed that 34.6% of the respondents had not received training or were unsure if they had, despite the fact that vendor engineers provide training at installation of the system. Any training received was referred to as minimal, and brief, not documented, and nothing in writing. 63.7% of respondents said they were either not at all prepared or only somewhat prepared to use the RMS software required to effectively operate the system. As a result of this analysis, a formal training curriculum will be designed and implemented to include several blended learning delivery options. This training will be piloted at RMS sites; initial training will become a required element of RMS installation and refresher training will be considered for sustainability of operations.

Day, Debra E.; Fox, Sorcha

2012-04-20T23:59:59.000Z

157

Detailed analysis of an endoreversible fuel cell : Maximum power and optimal operating temperature determination  

E-Print Network [OSTI]

Producing useful electrical work in consuming chemical energy, the fuel cell have to reject heat to its surrounding. However, as it occurs for any other type of engine, this thermal energy cannot be exchanged in an isothermal way in finite time through finite areas. As it was already done for various types of systems, we study the fuel cell within the finite time thermodynamics framework and define an endoreversible fuel cell. Considering different types of heat transfer laws, we obtain an optimal value of the operating temperature, corresponding to a maximum produced power. This analysis is a first step of a thermodynamical approach of design of thermal management devices, taking into account performances of the whole system.

A. Vaudrey; P. Baucour; F. Lanzetta; R. Glises

2010-08-30T23:59:59.000Z

158

Detailed analysis of an endoreversible fuel cell : Maximum power and optimal operating temperature determination  

E-Print Network [OSTI]

Producing useful electrical work in consuming chemical energy, the fuel cell have to reject heat to its surrounding. However, as it occurs for any other type of engine, this thermal energy cannot be exchanged in an isothermal way in finite time through finite areas. As it was already done for various types of systems, we study the fuel cell within the finite time thermodynamics framework and define an endoreversible fuel cell. Considering different types of heat transfer laws, we obtain an optimal value of the operating temperature, corresponding to a maximum produced power. This analysis is a first step of a thermodynamical approach of design of thermal management devices, taking into account performances of the whole system.

Vaudrey, A; Lanzetta, F; Glises, R

2009-01-01T23:59:59.000Z

159

Analysis of a transformer-less, multi-level DC-DC converter for HVDC operation  

SciTech Connect (OSTI)

HVDC systems require DC step up and DC step down units. The traditional approach is the application of twelve-pulse thyristor bridges with transformers. The developments of fast switching IGBT devices permit the development of transformer-less, multi-level converters. A multi-level circuit was suggested by Limpaecher. This paper presents a detailed simulation of the proposed circuit together with the analysis of its performance. The converter consists of a set of capacitors, air core inductors and solid state switches arranged in a ladder network. In the step-up mode, the closing of solid state switches resonantly charges the capacitors in parallel through an air-cored inductor. Then solid state switches resonantly charges the capacitors in parallel through an air-cored inductor. Then solid state switches connect the capacitors in series and discharge them through an air-core inductor to the load. In the step-down mode the capacitors are charged in series and discharged in parallel. The circuit has three modes of operation in each cycle: charge, inversion, and discharge. The circuit operation is analyzed in each mode using SPICE simulations. The selection of the components is discussed and output voltage regulation is analyzed. The results show that the proposed circuit promises significant reduction of losses, because of the zero current switching. The investment cost is reduced because of the elimination of transformers.

Karady, G.G.; Devarajan, S. [Arizona State Univ., Tempe, AZ (United States)

1998-12-31T23:59:59.000Z

160

SWEIS annual review - CY2002 : a comparison of CY2002 operations to projections included in the site-wide environmental impact statement for continued operation of Sandia National Laboratories/New Mexico.  

SciTech Connect (OSTI)

The SNL/NM CY2002 SWEIS Annual Review discusses changes in facilities and facility operations that have occurred in selected and notable facilities since source data were collected for the SNL/NM SWEIS (DOE/EIS-0281). The following information is presented: {sm_bullet} An updated overview of SNL/NM selected and notable facilities and infrastructure capabilities. {sm_bullet} An overview of SNL/NM environment, safety, and health programs, including summaries of the purpose, operations, activities, hazards, and hazard controls at relevant facilities and risk management methods for SNL/NM. {sm_bullet} Updated base year activities data, together with related inventories, material consumption, emissions, waste, and resource consumption. {sm_bullet} Appendices summarizing activities and related hazards at SNL/NM individual special, general, and highbay laboratories, and chemical purchases.

Bayliss, Linda Sue (Outrider Environmental Planning & Technical Services, Cedar Crest, NM); White, Brenda Bailey (The Plus Group, Inc., Albuquerque, NM); Guerrero, Joseph Vincent; Catechis, Christopher Spyros (Outrider Environmental Planning & Technical Services, Cedar Crest, NM)

2003-10-01T23:59:59.000Z

Note: This page contains sample records for the topic "analysis continued operation" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Continuous Flow Liquid Microjunction Surface Sampling Probe Connected On-line with HPLC/MS for Spatially Resolved Analysis of Small Molecules and Proteins  

SciTech Connect (OSTI)

RATIONALE: A continuous flow liquid microjunction surface sampling probe extracts soluble material from surfaces for direct ionization and detection by MS. Demonstrated here is the on-line coupling of such a probe with HPLC/MS enabling extraction, separation and detection of small molecules and proteins from surfaces in a spatially resolved (~0.5 mm diameter spots) manner. Methods: A continuous flow liquid microjunction surface sampling probe was connected to a 6-port, 2-position valve for extract collection and injection to an HPLC column. A QTRAP 5500 hybrid triple quadrupole linear ion trap equipped with a Turbo V ion source operated in positive ESI mode was used for all experiments. System operation was tested with extraction, separation and detection of propranolol and associated metabolites from drug dosed tissues and proteins from dried sheep blood spots on paper. Results: Confirmed in the tissue were the parent drug and two different hydroxypropranolol glucuronides. The mass spectrometric response for these compounds from different locations in the liver showed an increase with increasing extraction time (5, 20 and 40 s extractions). For on-line separation and detection/identification of extracted proteins from dried sheep blood spots, two major protein peaks dominated the chromatogram and could be correlated with the expected masses for the hemoglobin and chains. Conclusions: Spatially resolved sampling, separation, and detection of small molecules and proteins from surfaces can be accomplished using a continuous flow liquid microjunction surface sampling probe coupled on-line with HPLC/MS detection.

Van Berkel, Gary J [ORNL; Kertesz, Vilmos [ORNL

2013-01-01T23:59:59.000Z

162

IEEE TRANSACTIONS ON POWER SYSTEMS, VOL. 21, NO. 1, FEBRUARY 2006 171 Continuation-Based Quasi-Steady-State Analysis  

E-Print Network [OSTI]

-term load characteristic does not intersect the system PV curve (see Fig. 2). In Scenario One (see Fig. 1 the bifurcation points. Pa- rameterization of the load exponents through continuation method makes it possible to simulate dynamic load recovery models in the system without numerical integration. The tap dynamics

163

Office for Analysis and Evaluation of Operational Data. Annual report, 1994-FY 95  

SciTech Connect (OSTI)

The United States Nuclear Regulatory Commission`s Office for Analysis and Evaluation of Operational Data (AEOD) has published reports of its activities since 1984. The first report covered January through June of 1984, and the second report covered July through December 1984. Since those first two semiannual reports, AEOD has published annual reports of its activities from 1985 through 1993. Beginning with the report for 1986, AEOD Annual Reports have been published as NUREG-1272. Beginning with the report for 1987, NUREG-1272 has been published in two parts, No. 1 covering power reactors and No. 2 covering nonreactors (changed to {open_quotes}nuclear materials{close_quotes} with the 1993 report). The 1993 AEOD Annual Report was NUREG-1272, Volume 8. AEOD has changed its annual report from a calendar year to a fiscal year report to be consistent with the NRC Annual Report and to conserve staff resources. NUREG-1272, Volume 9, No. 1 and No. 2, therefore, are combined calendar year 1994 (1994) and fiscal year 1995 (FY 95) reports which describe activities conducted between January 1, 1994, and September 30, 1995. Certain data which have historically been reported on a calendar year basis, however, are complete through calendar year 1995. Throughout this report, whenever information is presented for fiscal year 1995, it is designated as FY 95 data. Calendar year information is always designated by the four digits of the calendar year. This report, NUREG-1272, Volume 9, No. 1, covers power reactors and presents an overview of the operating experience of the nuclear power industry from the NRC perspective. NUREG-1272, Vol. 9, No. 2, covers nuclear materials and presents a review of the events and concerns associated with the use of licensed material in non-power reactor applications. A new part has been added, NUREG-1272, Volume 9, No. 3, which covers technical training and presents the activities of the Technical Training Center in FY 95 in support of the NRC`s mission.

none,

1996-07-01T23:59:59.000Z

164

Work Domain Analysis of a Predecessor Sodium-cooled Reactor as Baseline for AdvSMR Operational Concepts  

SciTech Connect (OSTI)

This report presents the results of the Work Domain Analysis for the Experimental Breeder Reactor (EBR-II). This is part of the phase of the research designed to incorporate Cognitive Work Analysis in the development of a framework for the formalization of an Operational Concept (OpsCon) for Advanced Small Modular Reactors (AdvSMRs). For a new AdvSMR design, information obtained through Cognitive Work Analysis, combined with human performance criteria, can and should be used in during the operational phase of a plant to assess the crew performance aspects associated with identified AdvSMR operational concepts. The main objective of this phase was to develop an analytical and descriptive framework that will help systems and human factors engineers to understand the design and operational requirements of the emerging generation of small, advanced, multi-modular reactors. Using EBR-II as a predecessor to emerging sodium-cooled reactor designs required the application of a method suitable to the structured and systematic analysis of the plant to assist in identifying key features of the work associated with it and to clarify the operational and other constraints. The analysis included the identification and description of operating scenarios that were considered characteristic of this type of nuclear power plant. This is an invaluable aspect of Operational Concept development since it typically reveals aspects of future plant configurations that will have an impact on operations. These include, for example, the effect of core design, different coolants, reactor-to-power conversion unit ratios, modular plant layout, modular versus central control rooms, plant siting, and many more. Multi-modular plants in particular are expected to have a significant impact on overall OpsCon in general, and human performance in particular. To support unconventional modes of operation, the modern control room of a multi-module plant would typically require advanced HSIs that would provide sophisticated operational information visualization, coupled with adaptive automation schemes and operator support systems to reduce complexity. These all have to be mapped at some point to human performance requirements. The EBR-II results will be used as a baseline that will be extrapolated in the extended Cognitive Work Analysis phase to the analysis of a selected advanced sodium-cooled SMR design as a way to establish non-conventional operational concepts. The Work Domain Analysis results achieved during this phase have not only established an organizing and analytical framework for describing existing sociotechnical systems, but have also indicated that the method is particularly suited to the analysis of prospective and immature designs. The results of the EBR-II Work Domain Analysis have indicated that the methodology is scientifically sound and generalizable to any operating environment.

Ronald Farris; David Gertman; Jacques Hugo

2014-03-01T23:59:59.000Z

165

A Posteriori Analysis of Adaptive Multiscale Operator Decomposition Methods for Multiphysics Problems  

SciTech Connect (OSTI)

This project was concerned with the accurate computational error estimation for numerical solutions of multiphysics, multiscale systems that couple different physical processes acting across a large range of scales relevant to the interests of the DOE. Multiscale, multiphysics models are characterized by intimate interactions between different physics across a wide range of scales. This poses significant computational challenges addressed by the proposal, including: (1) Accurate and efficient computation; (2) Complex stability; and (3) Linking different physics. The research in this project focused on Multiscale Operator Decomposition methods for solving multiphysics problems. The general approach is to decompose a multiphysics problem into components involving simpler physics over a relatively limited range of scales, and then to seek the solution of the entire system through some sort of iterative procedure involving solutions of the individual components. MOD is a very widely used technique for solving multiphysics, multiscale problems; it is heavily used throughout the DOE computational landscape. This project made a major advance in the analysis of the solution of multiscale, multiphysics problems.

Donald Estep; Michael Holst; Simon Tavener

2010-02-08T23:59:59.000Z

166

Nonlinear dynamics analysis of a membrane Stirling engine: Starting and stable operation  

E-Print Network [OSTI]

This paper presents the work devoted to the study of the operation of a miniaturized membrane Stirling engine. Indeed, such an engine relies on the dynamic coupling of the motion of two membranes to achieve a prime mover Stirling thermodynamic cycle. The modelling of the system introduces the large vibration amplitudes of the membrane as well as the nonlinear dissipative effects associated to the fluid flow within the engine. The nonlinearities are expressed as polynomial functions with quadratic and cubic terms. This paper displays the stability analysis to predict the starting of the engine and the instability problem which leads to the steady state behaviour. The centre manifold - normal form theory is used to obtain the simplest expression for the limit cycle amplitudes. The approach allows the reduction of the number of equations of the original system in order to obtain a simplified system, without loosing the dynamics of the original system as well as the contributions of non-linear terms. The model in...

Formosa, Fabien

2013-01-01T23:59:59.000Z

167

Safety analysis--200 Area Savannah River Site: Separations Area operations Building 211-H Outside Facilities. Supplement 11, Revision 1  

SciTech Connect (OSTI)

The H-Area Outside Facilities are located in the 200-H Separations Area and are comprised of a number of processes, utilities, and services that support the separations function. Included are enriched uranium loadout, bulk chemical storage, water handling, acid recovery, general purpose evaporation, and segregated solvent facilities. In addition, services for water, electricity, and steam are provided. This Safety Analysis Report (SAR) documents an analysis of the H-Area Outside Facilities and is one of a series of documents for the Separations Area as specified in the SR Implementation Plan for DOE order 5481.1A. The primary purpose of the analysis was to demonstrate that the facility can be operated without undue risk to onsite or offsite populations, to the environment, and to operating personnel. In this report, risks are defined as the expected frequencies of accidents, multiplied by the resulting radiological consequences in person-rem. Following the summary description of facility and operations is the site evaluation including the unique features of the H-Area Outside Facilities. The facility and process design are described in Chapter 3.0 and a description of operations and their impact is given in Chapter 4.0. The accident analysis in Chapter 5.0 is followed by a list of safety related structures and systems (Chapter 6.0) and a description of the Quality Assurance program (Chapter 7.0). The accident analysis in this report focuses on estimating the risk from accidents as a result of operation of the facilities. The operations were evaluated on the basis of three considerations: potential radiological hazards, potential chemical toxicity hazards, and potential conditions uniquely different from normal industrial practice.

Not Available

1993-01-01T23:59:59.000Z

168

LoanSTAR Monitoring and Analysis Program: Presentation Summary of the State Capitol Complex Building Operation and Maintenance Field Test  

E-Print Network [OSTI]

requests, only 58% to 95% of AHUs identified in earlier report were shut off S. F. Austin Whole Building Electricity & Chilled Water Consumption Over 600 kW reduction when AHUs and lights turned off L.B. Johnson Whole Building Electricity & Chilled Water...LoanSTAR Monitoring and Analysis Program Presentation Summary of the State Capitol Complex Building Operation and Maintenance Field Test Presented to the State Purchasing and General Services Commission By the Monitoring Analysis Task E Dr. W. D...

Turner, W. D.; Houcek, J. K.; Liu, M.; Claridge, D. E.

1993-01-01T23:59:59.000Z

169

Analysis of the Impact of Balancing Area Cooperation on the Operation of the Western Interconnection with Wind and Solar Generation (Presentation)  

SciTech Connect (OSTI)

This presentation describes the analysis of the impact of balancing area cooperation on the operation of the Western Interconnection with wind and solar generation, including a discussion of operating reserves, ramping, production simulation, and conclusions.

Milligan, M.; Lew, D.; Jordan, G.; Piwko, R.; Kirby, B.; King, J.; Beuning, S.

2011-05-01T23:59:59.000Z

170

The Joint Institute for Strategic Energy Analysis is operated by the Alliance for Sustainable Energy, LLC, on behalf of the U.S. Department of Energy's  

E-Print Network [OSTI]

The Joint Institute for Strategic Energy Analysis is operated by the Alliance for Sustainable Analysis is operated by the Alliance for Sustainable Energy, LLC, on behalf of the U.S. Department Energy, LLC. The Joint Institute for Strategic Energy Analysis 15013 Denver West Parkway Golden, Colorado

171

The Joint Institute for Strategic Energy Analysis is operated by the Alliance for Sustainable Energy, LLC, on behalf of the U.S. Department of Energy's  

E-Print Network [OSTI]

The Joint Institute for Strategic Energy Analysis is operated by the Alliance for Sustainable Institute for Strategic Energy Analysis is operated by the Alliance for Sustainable Energy, LLC, on behalf of the Alliance for Sustainable Energy, LLC. The Joint Institute for Strategic Energy Analysis 15013 Denver West

172

The Joint Institute for Strategic Energy Analysis is operated by the Alliance for Sustainable Energy, LLC, on behalf of the U.S. Department of Energy's  

E-Print Network [OSTI]

The Joint Institute for Strategic Energy Analysis is operated by the Alliance for Sustainable/TP-6A50-60052 February 2014 #12;The Joint Institute for Strategic Energy Analysis is operated Institute for Strategic Energy Analysis 15013 Denver West Parkway Golden, CO 80401 303-275-3000 · www

173

Systems Modeling and Analysis Industrial Engineers are interested in optimizing the design and operation of complex systems  

E-Print Network [OSTI]

Systems Modeling and Analysis Industrial Engineers are interested in optimizing the design and operation of complex systems composed of people and machines using information, materials and energy to produce goods and services. Analyzing such systems with information-driven models is an essential step

Dyer, Bill

174

Survey Results and Analysis of the Cost and Efficiency of Various Operating Hydrogen Fueling Stations  

SciTech Connect (OSTI)

Existing Hydrogen Fueling Stations were surveyed to determine capital and operational costs. Recommendations for cost reduction in future stations and for research were developed.

Cornish, John

2011-03-05T23:59:59.000Z

175

Microsoft Word - Environmental Document for Continued Operation...  

National Nuclear Security Administration (NNSA)

(enter East Gate on Greenville Road), and the following websites: DOE website: http:www.doeal.govlso Laboratory website: https:www-envirinfo.llnl.govenviroRecent.php -30-...

176

Both construction and operations continue to increase  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth (AOD)ProductssondeadjustsondeadjustAboutScienceCareers Apply forBiosurveillanceBorrowing fromBorup winsBoth

177

CONTINUATION, O DOCUMENT BEING CONTINUED  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-Series to someone6Energy, science,PrinciplesPlasma& RecordsCONTINUATION

178

Analysis of Actual Operating Conditions of an Off-grid Solid Oxide Fuel Cell  

SciTech Connect (OSTI)

Fuel cells have been proposed as ideal replacements for other technologies in remote locations such as Rural Alaska. A number of suppliers have developed systems that might be applicable in these locations, but there are several requirements that must be met before they can be deployed: they must be able to operate on portable fuels, and be able to operate with little operator assistance for long periods of time. This project was intended to demonstrate the operation of a 5 kW fuel cell on propane at a remote site (defined as one without access to grid power, internet, or cell phone, but on the road system). A fuel cell was purchased by the National Park Service for installation in their newly constructed visitor center at Exit Glacier in the Kenai Fjords National Park. The DOE participation in this project as initially scoped was for independent verification of the operation of this demonstration. This project met with mixed success. The fuel cell has operated over 6 seasons at the facility with varying degrees of success, with one very good run of about 1049 hours late in the summer of 2006, but in general the operation has been below expectations. There have been numerous stack failures, the efficiency of electrical generation has been lower than expected, and the field support effort required has been far higher than expected. Based on the results to date, it appears that this technology has not developed to the point where demonstrations in off road sites are justified.

Dennis Witmer; Thomas Johnson; Jack Schmid

2008-12-31T23:59:59.000Z

179

Analysis of damage mechanisms in boronized TZM tiles from Alcator C-Mod fusion reactor operations  

E-Print Network [OSTI]

Alcator C-Mod is a deuterium tokamak reactor experiment operated by the MIT Plasma Science and Fusion Center. Following the 2008 Alcator C-Mod campaign, the reactor was shut down and opened for maintenance and upgrades. ...

Hubley, Joseph Michael

2010-01-01T23:59:59.000Z

180

Entropic analysis of a dual-mode scramjet engine for system performance/operability enhancement .  

E-Print Network [OSTI]

??"Recent analytical advances in understanding the performance range (thermodynamic spectrum) for air-breathing engines based upon fundamental second-law considerations have clarified scramjet and ramjet operation, performance,… (more)

Tackett, Regan, 1978-

2007-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "analysis continued operation" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Operational profiling and statistical analysis of Arleigh Burke-class destroyers  

E-Print Network [OSTI]

Ship operational profiles are a valuable tool for ship designers and engineers when analyzing potential designs and ship system selections. The most common is the speed-time profile, normally depicted as a histogram showing ...

Anderson, Travis J. (Travis John)

2013-01-01T23:59:59.000Z

182

Observation and analysis of departure operations at Boston Logan International Airport  

E-Print Network [OSTI]

In order to support the development of improved methods for departure operations, the flow constraints and their causalities --primarily responsible for inefficiencies and delays-- need to be identified. This thesis is an ...

Idris, Husni Rifat

2001-01-01T23:59:59.000Z

183

Observation and Analysis of Departure Planning Operations at Boston Logan International Airport  

E-Print Network [OSTI]

The Departure Planner (DP) is a concept for a decision-aiding tool that is aimed at improving the departure operations performance at major congested airports. In order to support the development of the DP tool, the flow ...

Idris, Husni R.

2011-10-14T23:59:59.000Z

184

The Operation Management and Energy Consumption Analysis of the District Cooling System  

E-Print Network [OSTI]

for the operation management. It can be concluded that the district cooling system not only can save energy and protect the environment, but also is economically feasible. It should be developed and popularized in China because of its significant advantages....

Xu, Q.; Li, D.; Xu, W.

2006-01-01T23:59:59.000Z

185

Multifamily Building Operator Job/Task Analysis and Report: September 2013  

SciTech Connect (OSTI)

The development of job/task analyses (JTAs) is one of three components of the Guidelines for Home Energy Professionals project and will allow industry to develop training resources, quality assurance protocols, accredited training programs, and professional certifications. The Multifamily Building Operator JTA identifies and catalogs all of the tasks performed by multifamily building operators, as well as the knowledge, skills, and abilities (KSAs) needed to perform the identified tasks.

Owens, C. M.

2013-09-01T23:59:59.000Z

186

Report to the US Nuclear Regulatory Commission on analysis and evaluation of operational data - 1987: Power reactors  

SciTech Connect (OSTI)

This annual report of the US Nuclear Regulatory Commission's Office for Analysis and Evaluation of Operational Data (AEOD) is devoted to the activities performed during 1987. The report is published in two volumes. NUREG-1272, Vol. 2, No. 1, covers Power Reactors and presents an overview of the operating experience of the nuclear power industry, with comments regarding the trends of some key performance measures. The report also includes the principal findings and issues identified in AEOD studies over the past year, and summarizes information from Licensee Event Reports, the NRC's Operations Center, and Diagnostic Evaluations. NUREG-1272, Vol. 2, No. 2, covers Nonreactors and presents a review of the nonreactors events and misadministration reports that were reported in 1987 and a brief synopsis of AEOD studies published in 1987. Each volume contains a list of the AEOD Reports issued for 1980-1987.

none,

1988-10-01T23:59:59.000Z

187

Degraded Modes and the `Culture of Coping' in Military Operations: An Analysis of a Fatal Incident On-Board HMS Tireless on 20/21 March 2007  

E-Print Network [OSTI]

was following Standard operating Procedures (SOPs) using Self Contained Oxygen Generators (SCOGs) to maintain and operators must work together to ensure that maintenance intervals are scheduled so that critical componentsDegraded Modes and the `Culture of Coping' in Military Operations: An Analysis of a Fatal Incident

Johnson, Chris

188

Evaluation of potential severe accidents during low power and shutdown operations at Surry, Unit 1: Analysis of core damage frequency from internal events during mid-loop operations. Appendix E (Sections E.9-E.16), Volume 2, Part 3B  

SciTech Connect (OSTI)

Traditionally, probabilistic risk assessments (PRA) of severe accidents in nuclear power plants have considered initiating events potentially occurring only during full power operation. Some previous screening analyses that were performed for other modes of operation suggested that risks during those modes were small relative to full power operation. However, more recent studies and operational experience have implied that accidents during low power and shutdown could be significant contributors to risk. Two plants, Surry (pressurized water reactor) and Grand Gulf (boiling water reactor), were selected as the plants to be studied. The objectives of the program are to assess the risks of severe accidents initiated during plant operational states other than full power operation and to compare the estimated core damage frequencies, important accident sequences and other qualitative and quantitative results with those accidents initiated during full power operation as assessed in NUREG-1150. The scope of the program includes that of a level-3 PRA. In phase 2, mid-loop operation was selected as the plant configuration to be analyzed based on the results of the phase 1 study. The objective of the phase 2 study is to perform a detailed analysis of the potential accident scenarios that may occur during mid-loop operation, and compare the results with those of NUREG-1150. The scope of the level-1 study includes plant damage state analysis, and uncertainty analysis. Volume 1 summarizes the results of the study. Internal events analysis is documented in Volume 2. It also contains an appendix that documents the part of the phase 1 study that has to do with POSs other than mid-loop operation. Internal fire and internal flood analyses are documented in Volumes 3 and 4. A separate study on seismic analysis, documented in Volume 5, was performed for the NRC by Future Resources Associates, Inc. Volume 6 documents the accident progression, source terms, and consequence analysis.

Chu, T.L.; Musicki, Z.; Kohut, P.; Yang, J.; Bozoki, G.; Hsu, C.J.; Diamond, D.J.; Wong, S.M. [Brookhaven National Lab., Upton, NY (United States); Bley, D.; Johnson, D. [PLG Inc., Newport Beach, CA (United States)] [and others

1994-06-01T23:59:59.000Z

189

Evaluation of potential severe accidents during low power and shutdown operations at Surry, Unit-1: Analysis of core damage frequency from internal events during mid-loop operations. Appendices F-H, Volume 2, Part 4  

SciTech Connect (OSTI)

Traditionally, probabilistic risk assessments (PRA) of severe accidents in nuclear power plants have considered initiating events potentially occurring only during full power operation. Some previous screening analyses that were performed for other modes of operation suggested that risks during those modes were small relative to full power operation. However, more recent studies and operational experience have implied that accidents during low power and shutdown could be significant contributors to risk. Two plants, Surry (pressurized water reactor) and Grand Gulf (boiling water reactor), were selected as the plants to be studied. The objectives of the program are to assess the risks of severe accidents initiated during plant operational states other than full power operation and to compare the estimated core damage frequencies, important accident sequences and other qualitative and quantitative results with those accidents initiated during full power operation as assessed in NUREG-1150. The scope of the program includes that of a level-3 PRA. In phase 2, mid-loop operation was selected as the plant configuration to be analyzed based on the results of the phase 1 study. The objective of the phase 2 study is to perform a detailed analysis of the potential accident scenarios that may occur during mid-loop operation, and compare the results with those of NUREG-1150. The scope of the level-1 study includes plant damage state analysis, and uncertainty analysis. Volume 1 summarizes the results of the study. Internal events analysis is documented in Volume 2. It also contains an appendix that documents the part of the phase 1 study that has to do with POSs other than mid-loop operation. Internal fire and internal flood analyses are documented in Volumes 3 and 4. A separate study on seismic analysis, documented in Volume 5, was performed for the NRC by Future Resources Associates, Inc. Volume 6 documents the accident progression, source terms, and consequence analysis.

Chu, T.L.; Musicki, Z.; Kohut, P.; Yang, J.; Bozoki, G.; Hsu, C.J.; Diamond, D.J. [Brookhaven National Lab., Upton, NY (United States); Bley, D.; Johnson, D. [PLG Inc., Newport Beach, CA (United States); Holmes, B. [AEA Technology, Dorset (United Kingdom)] [and others

1994-06-01T23:59:59.000Z

190

CAMEA ESS - The Continuous Angle Multi-Energy Analysis Indirect Geometry Spectrometer for the European Spallation Source  

E-Print Network [OSTI]

The CAMEA ESS neutron spectrometer is designed to achieve a high detection efficiency in the horizontal scattering plane, and to maximize the use of the long pulse European Spallation Source. It is an indirect geometry time-of-flight spectrometer that uses crystal analysers to determine the final energy of neutrons scattered from the sample. Unlike other indirect gemeotry spectrometers CAMEA will use ten concentric arcs of analysers to analyse scattered neutrons at ten different final energies, which can be increased to 30 final energies by use of prismatic analysis. In this report we will outline the CAMEA instrument concept, the large performance gain, and the potential scientific advancements that can be made with this instrument.

Freeman, P G; Markó, M; Bertelsen, M; Larsen, J; Christensen, N B; Lefmann, K; Jacobsen, J; Niedermayer, Ch; Juranyi, F; Ronnow, H M

2014-01-01T23:59:59.000Z

191

Transient thermal analysis for radioactive liquid mixing operations in a large-scaled tank  

DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

A transient heat balance model was developed to assess the impact of a Submersible Mixer Pump (SMP) on radioactive liquid temperature during the process of waste mixing and removal for the high-level radioactive materials stored in Savannah River Site (SRS) tanks. The model results will be mainly used to determine the SMP design impacts on the waste tank temperature during operations and to develop a specification for a new SMP design to replace existing longshaft mixer pumps used during waste removal. The present model was benchmarked against the test data obtained by the tank measurement to examine the quantitative thermal response of the tank and to establish the reference conditions of the operating variables under no SMP operation. The results showed that the model predictions agreed with the test data of the waste temperatures within about 10%.

Lee, S. Y.; Smith, III, F. G.

2014-10-01T23:59:59.000Z

192

Impact of Operational Practices on Rail Line Capacity: A Simulation Analysis  

E-Print Network [OSTI]

@illinois.edu, yclai@ntu.edu.tw, cbarkan@illinois.edu ABSTRACT Long-term demand for freight and passenger is critical for cost-effective planning of new capacity. A key aspect of this is the effect of heterogeneous conducted to evaluate the effectiveness of various operational changes to reduce delays. The trade

Barkan, Christopher P.L.

193

Threshold analysis with fault-tolerant operations for nonbinary quantum error correcting codes  

E-Print Network [OSTI]

Quantum error correcting codes have been introduced to encode the data bits in extra redundant bits in order to accommodate errors and correct them. However, due to the delicate nature of the quantum states or faulty gate operations, there is a...

Kanungo, Aparna

2005-11-01T23:59:59.000Z

194

A Complexity Science-Based Framework for Global Joint Operations Analysis to Support Force Projection: LDRD Final Report.  

SciTech Connect (OSTI)

The military is undergoing a significant transformation as it modernizes for the information age and adapts to address an emerging asymmetric threat beyond traditional cold war era adversaries. Techniques such as traditional large-scale, joint services war gaming analysis are no longer adequate to support program evaluation activities and mission planning analysis at the enterprise level because the operating environment is evolving too quickly. New analytical capabilities are necessary to address modernization of the Department of Defense (DoD) enterprise. This presents significant opportunity to Sandia in supporting the nation at this transformational enterprise scale. Although Sandia has significant experience with engineering system of systems (SoS) and Complex Adaptive System of Systems (CASoS), significant fundamental research is required to develop modeling, simulation and analysis capabilities at the enterprise scale. This report documents an enterprise modeling framework which will enable senior level decision makers to better understand their enterprise and required future investments.

Lawton, Craig R.

2015-01-01T23:59:59.000Z

195

Applications of ENDF/B-VI and JENDL-3.1 iron data to reactor pressure vessel fluence analysis using continuous energy Monte Carlo code MCNP  

SciTech Connect (OSTI)

A comparison is made of results obtained from neutron transmissions analysis of RPV performed by MCNP with ENDF/B-VI and JENDL-3.1 iron data. At first, a one-dimensional discrete ordinates transport calculation using VITAMIN-C fine-group library based on ENDF/B-IV was performed for a cylindrical model of a PWR to generate the source spectrum at the front of the RPV. And then, the transmission of neutrons through RPV was calculated by MCNP with the moderated fission spectrum incident on the vessel face. For these ENDF/B-IV, -VI and JENDL-3.1 iron data were processed into continuous energy point data form by NJOY91.91. The fast neutron fluxes and dosimeter reaction rates through RPV using each iron data were intercompared.

Kim, Jungo-Do; Gil, Choong-Sup [Korea Atomic Energy Research Institute, Taejon (Korea, Democratic People`s Republic of)

1994-12-31T23:59:59.000Z

196

Simulation of a continuous rotary dissolver  

SciTech Connect (OSTI)

This paper describes the simulation of a rotating, multistage chemical reactor that dissolves spent nuclear fuel for reprocessing in a breeder cycle. The continuous, time-dependent process model of a dissolver was developed using the Advanced Continuous Simulation Language (ACSL) to calculate various temperatures and the masses of the chemical constituents of the solution in each stage. The Gear integration algorithm (Gear 1971) was used to accommodate the stiff dynamics. An arrangement of interacting discrete sections was employed to cause fresh fuel to be added and dissolver rotations to occur at appropriate times. By changing various constants, the model can simulate the effect of different fuel compositions and operational scenarios. The model code is a valuable tool for analysis of the performance of the dissolution system and has been instrumental in its design. 5 refs., 7 figs.

Carnal, C.L.; Hardy, J.E.; Lewis, B.E.

1989-01-01T23:59:59.000Z

197

Analysis, Design, and Operation of a Spherical Inverted-F Antenna  

E-Print Network [OSTI]

This thesis presents the analysis, design, and fabrication of a spherical inverted-F antenna (SIFA). The SIFA consists of a spherically conformal rectangular patch antenna recessed into a quarter section of a metallic sphere. The sphere acts as a...

McDonald, Jacob J.

2010-07-14T23:59:59.000Z

198

Analysis of operating data related to power and flow distribution in a PWR  

E-Print Network [OSTI]

The analysis of the effects of the uncertainties associated with temperature and power measurements in the Connecticut Yankee Reactor leads to the evaluation of the uncertainty associated with the effective flow factor. ...

Herbin, Henry Christophe

1974-01-01T23:59:59.000Z

199

Analysis of high-burnup fuel performance during load-follow operation  

SciTech Connect (OSTI)

In Japan, an objective of the burnup extension of nuclear fuel is to raise the licensing limit of burnup from 39 to 48 GWd/t for pressurized water reactors (PWRs) in the near future. Because of an increasing ratio of nuclear power generation, the necessity of the load-follow operation, which responds flexibly to changing power demands, is more apparent. To evaluate accurately the mechanical integrity of PWR fuel at high burnup during a load-follow operation, the FEMAXI-III code, originally developed for analyses of fuel experiments, was modified, improving submodels to evaluate PWR fuel; the new code was named IRON. The results of verification work on the code using data on PWR fuel covering wide ranges of burnup and linear heat rate show that it has good predictability and, therefore, that the improvement was confirmed as effective.

Matsui, T.; Fukuya, K.; Kinoshita, M.

1987-01-01T23:59:59.000Z

200

Analysis of oscillation characteristics and optimal conditions for high power operation of Gyrotron FU CW GIII  

SciTech Connect (OSTI)

The oscillation characteristics of Gyrotron FU CW GIII and its wave frequency and output power dependences on the magnetic field strength, the gun coil current, and the anode voltage were investigated experimentally. The experimental results were analyzed theoretically using a self-consistent code that included the electron properties in the cavity, corresponding to the actual operating conditions in the experiments. As a result, it was found that the variation in frequency with the magnetic field strength was related to an axial profile change in the electromagnetic wave in the cavity. In addition, the optimal condition that gives the maximum output power was found to be determined by the pitch factor rather than by the electron beam radius under the given operating conditions.

Tatematsu, Y., E-mail: tatema@fir.u-fukui.ac.jp; Yamaguchi, Y.; Kawase, T.; Ichioka, R.; Ogawa, I.; Saito, T.; Idehara, T. [Research Center for Development of Far-Infrared Region, University of Fukui, Fukui 910-8507 (Japan)

2014-08-15T23:59:59.000Z

Note: This page contains sample records for the topic "analysis continued operation" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Dairy Outreach Program Training and Continuing Education Program  

E-Print Network [OSTI]

This publication describes the training and continuing education required for those who own or operate concentrated animal feeding operations in Texas....

Mukhtar, Saqib

1999-10-30T23:59:59.000Z

202

Ensemble operational air quality assessments in Europe Improving modeling platforms with statistical analysis  

E-Print Network [OSTI]

with statistical analysis Anthony Ung, Laure Malherbe, Frederik Meleux, Bertrand Bessagnet, Laurence Rouil and MACCII modeling team INERIS institut, Paris, France Corresponding author: Anthony.ung@ineris.fr Abstract/QC dossiers and available on the MACC project website for each model. All models have also very significant

Paris-Sud XI, Université de

203

Preliminary Accident Analysis for Construction and Operation of the Chornobyl New Safety Confinement  

SciTech Connect (OSTI)

Analysis of potential exposure of personal and population during construction and exploitation of the New Safe Confinement was made. Scenarios of hazard event development were ranked. It is shown, that as a whole construction and exploitation of the NSC are in accordance with actual radiation safety norms of Ukraine.

Batiy, Valeriy; Rubezhansky, Yruiy; Rudko, Vladimir; shcherbin, vladimir; Yegorov, V; Schmieman, Eric A.; Timmins, Douglas C.

2005-08-08T23:59:59.000Z

204

Analysis of radiation exposure for naval personnel at Operation Ivy. Technical report  

SciTech Connect (OSTI)

The radiological environments are reconstructed for eighteen ships and the residence islands of Enewetak, Kwajalein, and Bikini Atolls that received fallout following Shots MIKE and KING during Operation IVY (November 1952). Secondary (late-time) fallout from Shot MIKE was the primary contributor to the low-level radiation encountered on the majority of the ships and atolls; only the M/V HORIZON received primary (early-time) fallout from this event. Fallout from Shot KING was minimal. From the reconstructed operations and radiological environments, equivalent personnel film badge doses are calculated and compared with available dosimetry data for fourteen of the ships. Calculated doses for the majority of the ships are in good agreement with the film badge data; however, for three of the participating destroyers (DDEs), calculated doses are significantly lower than the dosimetry data indicates. Calculated mean doses for typical shipboard personnel range from a high of 0.062 rem on the HORIZON to a low of 0.001 rem on the SPENCER F. BAIRD; for island-based personnel, calculated mean doses are less than 0.06 rem.

Thomas, C.; Goetz, J.; Stuart, J.; Klemm, J.

1983-03-15T23:59:59.000Z

205

Deutsch-Jozsa algorithm for continuous variables  

E-Print Network [OSTI]

We present an idealized quantum continuous variable analog of the Deutsch-Jozsa algorithm which can be implemented on a perfect continuous variable quantum computer. Using the Fourier transformation and XOR gate appropriate for continuous spectra we show that under ideal operation to infinite precision that there is an infinite reduction in number of query calls in this scheme.

Arun K. Pati; Samuel L. Braunstein

2002-07-18T23:59:59.000Z

206

Probabilistic analysis and operational data in response to NUREG-0737, Item II. K. 3. 2 for Westinghouse NSSS plants. [Modifications to reduce LOCA due to stuck-open power-operated relief valve  

SciTech Connect (OSTI)

This report describes various modifications to Westinghouse plants since TMI and, using probabilistic analysis via event trees, estimates the effect of the post-TMI changes, including an automatic (PORV) (power operated relief valve) isolation concept identified in NUREG-0731 item II.K.3.1. The requested safety valve operational data is included as an appendix. A significant reduction in the frequency of a small break LOCA, due to a stuck open PORV has already been achieved by the modifications made subsequent to TMI. Domestic Westinghouse operating plant data (based on 181 reactor years of operation) has been collected and evaluated. An auto block valve closure system has been evaluated. The analysis is generally applicable to all Westinghouse plants which have incorporated the post-TMI hardware and procedural changes relative to stuck-open PORVs.

Wood, D.C.; Gottshall, C.L.

1981-02-01T23:59:59.000Z

207

Assessing the Impacts of Reduced Noise Operations of Wind Turbines on Neighbor Annoyance: A Preliminary Analysis in Vinalhaven, Maine  

E-Print Network [OSTI]

Noise Operations of Wind Turbines on Neighbor Annoyance: ANoise Operations of Wind Turbines on Neighbor Annoyance: A

Hoen, Ben

2010-01-01T23:59:59.000Z

208

Office for Analysis and Evaluation of Operational Data 1992 annual report: Power reactors. Volume 7, No. 1  

SciTech Connect (OSTI)

The annual report of the US Nuclear Regulatory Commission`s Office for Analysis and Evaluation of Operational Data (AEOD) is devoted to the activities performed during 1992. The report is published in two separate parts. NUREG-1272, Vol. 7, No. 1, covers power reactors and presents an overview of the operating experience of the nuclear power industry from the NRC perspective, including comments about the trends of some key performance, measures. The report also includes the principal findings and issues identified in AEOD studies over the past year, and summarizes information from such sources as licensee event report% diagnostic evaluations, and reports to the NRC`s Operations Center. The reports contain a discussion of the Incident Investigation Team program and summarize the Incident Investigation Team and Augmented Inspection Team reports for that group of licensees. NUREG-1272, Vol. 7, No. 2, covers nonreactors and presents a review of the events and concerns during 1992 associated with the use of licensed material in nonreactor applications, such as personnel overexposures and medical misadministrations. Each volume contains a list of the AEOD reports issued for 1984--1992.

none,

1993-07-01T23:59:59.000Z

209

Office for Analysis and Evaluation of Operational Data 1996 annual report. Volume 10, Number 3: Technical training  

SciTech Connect (OSTI)

This annual report of the US Nuclear Regulatory Commission`s Office for Analysis and Evaluation of Operational Data (AEOD) describes activities conducted during 1996. The report is published in three parts. NUREG-1272, Vol. 10, No. 1, covers power reactors and presents an overview of the operating experience of the nuclear power industry from the NRC perspective, including comments about trends of some key performance measures. The report also includes the principal findings and issues identified in AEOD studies over the past year and summarizes information from such sources as licensee event reports and reports to the NRC`s Operations Center. NUREG-1272, Vol. 10, No. 2, covers nuclear materials and presents a review of the events and concerns during 1996 associated with the use of licensed material in nonreactor applications, such as personnel overexposures and medical misadministrations. Both reports also contain a discussion of the Incident Investigation Team program and summarize both the Incident Investigation Team and Augmented Inspection Team reports. Each volume contains a list of the AEOD reports issued from CY 1980 through 1996. NUREG-1272, Vol. 10, No. 3, covers technical training and presents the activities of the Technical Training Center in support of the NRC`s mission in 1996.

NONE

1997-12-01T23:59:59.000Z

210

Office for Analysis and Evaluation of Operational Data 1994-FY 95 annual report. Volume 9, Number 2  

SciTech Connect (OSTI)

This annual report of the US Nuclear Regulatory Commission`s Office for Analysis and Evaluation of Operational Data (AEOD) describes activities conducted during CY 1994 and FY 1995. The report is published in three parts. NUREG-1272, Vol. 9, No. 1, covers power reactors and presents an overview of the operating experience of the nuclear power industry from the NRC perspective, including comments about the trends of some key performance measures. The report also includes the principal findings and issues identified in AEOD studies over the past year and summarizes information from such sources as licensee event reports, diagnostic evaluations, and reports to the NRC`s Operations Center. NUREG-1272, Vol. 9, No. 2, covers nuclear materials and presents a review of the events and concerns associated with the use of licensed material in nonreactor applications, such as personnel overexposures and medical misadministrations. Both reports also contain a discussion of the Incident Investigation Team program and summarize both the Incident Investigation Team and Augmented Inspection Team reports. Each volume contains a list of the AEOD reports issued from 1980 through FY 1995. NUREG-1272, Vol. 9, No. 3, covers technical training and presents the activities of the Technical Training Center in support of the NRC`s mission.

NONE

1996-09-01T23:59:59.000Z

211

Dynamic Analysis of Hybrid Energy Systems under Flexible Operation and Variable Renewable Generation -- Part I: Dynamic Performance Analysis and Part II: Dynamic Cost  

SciTech Connect (OSTI)

Dynamic analysis of hybrid energy systems (HES) under flexible operation and variable renewable generation is considered in order to better understand various challenges and opportunities associated with the high system variability arising from the integration of renewable energy into the power grid. Unique consequences are addressed by devising advanced HES solutions in which multiple forms of energy commodities, such as electricity and chemical products, may be exchanged. Dynamic models of various unit operations are developed and integrated within two different HES options. One HES option, termed traditional, produces electricity only and consists of a primary heat generator (PHG) (e.g., a small modular reactor), a steam turbine generator, a wind farm, and a battery storage. The other HES option, termed advanced, includes not only the components present in the traditional option but also a chemical plant complex to repurpose excess energy for non-electricity services, such as for the production of chemical goods (e.g., transportation fuel). In either case, a given HES is connected to the power grid at a point of common coupling and requested to deliver a certain electricity generation profile as dictated by a regional power grid operator based on a predicted demand curve. Dynamic analysis of these highly-coupled HES are performed to identify their key dynamical properties and limitations and to prescribe solutions for best managing and mitigating the high variability introduced from incorporating renewable energy into the energy mix. A comparative dynamic cost analysis is also conducted to determine best HES options. The cost function includes a set of metrics for computing fixed costs, such as fixed operations and maintenance (O&M) and overnight capital costs, and also variable operational costs, such as cost of variability, variable O&M cost, and cost of environmental impact, together with revenues. Assuming different options for implementing PHG (e.g., natural gas, coal, nuclear), preliminary results identify the level of renewable penetration at which a given advanced HES option (e.g., a nuclear hybrid) becomes increasingly more economical than a traditional electricity-only generation solution. Conditions are also revealed under which carbon resources may be better utilized as carbon sources for chemical production rather than as combustion material for electricity generation.

Humberto E. Garcia; Amit Mohanty; Wen-Chiao Lin; Robert S. Cherry

2013-04-01T23:59:59.000Z

212

Plug-In Electric Vehicle Fast Charge Station Operational Analysis with Integrated Renewables: Preprint  

SciTech Connect (OSTI)

The growing, though still nascent, plug-in electric vehicle (PEV) market currently operates primarily via level 1 and level 2 charging in the United States. Fast chargers are still a rarity, but offer a confidence boost to oppose 'range anxiety' in consumers making the transition from conventional vehicles to PEVs. Because relatively no real-world usage of fast chargers at scale exists yet, the National Renewable Energy Laboratory developed a simulation to help assess fast charging needs based on real-world travel data. This study documents the data, methods, and results of the simulation run for multiple scenarios, varying fleet sizes, and the number of charger ports. The grid impact of this usage is further quantified to assess the opportunity for integration of renewables; specifically, a high frequency of fast charging is found to be in demand during the late afternoons and evenings coinciding with grid peak periods. Proper integration of a solar array and stationary battery thus helps ease the load and reduces the need for new generator construction to meet the demand of a future PEV market.

Simpson, M.; Markel, T.

2012-08-01T23:59:59.000Z

213

Analysis of radiation exposure for naval units of Operation CROSSROADS. Volume 1. Basic report. Technical report  

SciTech Connect (OSTI)

External radiation doses are reconstructed for crews of support and target ships of Joint Task Force One at Operation CROSSROADS, 1946. Volume I describes the reconstruction methodology, which consists of modeling the radiation environment, to include the radioactivity of lagoon water, target ships, and support ship contamination; retracing ship paths through this environment; and calculating the doses to shipboard personnel. The USS RECLAIMER, a support ship, is selected as a representative ship to demonstrate this methodology. Doses for all other ships are summarized. Volume II (Appendix A) details the results for target ship personnel. Volume III (Appendix B) details the results for support ship personnel. Calculated doses for more than 36,000 personnel aboard support ships while at Bikini range from zero to 1.7 rem. Of those approximately 34,000 are less than 0.5 rem. From the models provided, doses due to target ship reboarding and doses accrued after departure from Bikini can be calculated, based on the individual circumstances of exposure.

Weitz, R.; Thomas, C.; Klemm, J.; Stuart, J.; Knowles, M.

1982-03-03T23:59:59.000Z

214

Analysis of Unit-Level Changes in Operations with Increased SPP Wind from EPRI/LCG Balancing Study  

SciTech Connect (OSTI)

Wind power development in the United States is outpacing previous estimates for many regions, particularly those with good wind resources. The pace of wind power deployment may soon outstrip regional capabilities to provide transmission and integration services to achieve the most economic power system operation. Conversely, regions such as the Southeastern United States do not have good wind resources and will have difficulty meeting proposed federal Renewable Portfolio Standards with local supply. There is a growing need to explore innovative solutions for collaborating between regions to achieve the least cost solution for meeting such a renewable energy mandate. The Department of Energy funded the project 'Integrating Midwest Wind Energy into Southeast Electricity Markets' to be led by EPRI in coordination with the main authorities for the regions: SPP, Entergy, TVA, Southern Company and OPC. EPRI utilized several subcontractors for the project including LCG, the developers of the model UPLAN. The study aims to evaluate the operating cost benefits of coordination of scheduling and balancing for Southwest Power Pool (SPP) wind transfers to Southeastern Electric Reliability Council (SERC) Balancing Authorities (BAs). The primary objective of this project is to analyze the benefits of regional cooperation for integrating mid-western wind energy into southeast electricity markets. Scenarios were defined, modeled and investigated to address production variability and uncertainty and the associated balancing of large quantities of wind power in SPP and delivery to energy markets in the southern regions of the SERC. DOE funded Oak Ridge National Laboratory to provide additional support to the project, including a review of results and any side analysis that may provide additional insight. This report is a unit-by-unit analysis of changes in operations due to the different scenarios used in the overall study. It focuses on the change in capacity factors and the number of start-ups required for each unit since those criteria summarize key aspects of plant operations, how often are they called upon and how much do they operate. The primary analysis of the overall project is based on security-constrained unit commitment (SCUC) and economic dispatch (SCED) simulations of the SPP-SERC regions as modeled for the year 2022. The SCUC/SCED models utilized for the project were developed through extensive consultation with the project utility partners, to ensure the various regions and operational practices are represented as best as possible in the model. SPP, Entergy, Oglethorpe Power Company (OPC), Southern Company, and the Tennessee Valley Authority (TVA) actively participated in the project providing input data for the models and review of simulation results and conclusions. While other SERC utility systems are modeled, the listed SERC utilities were explicitly included as active participants in the project due to the size of their load and relative proximity to SPP for importing wind energy.

Hadley, Stanton W [ORNL

2012-01-01T23:59:59.000Z

215

Laser Ablation Sampling of Materials Directly into the Formed Liquid Microjunction of a Continuous Flow Surface Sampling Probe/Electrospray Ionization Emitter for Mass Spectral Analysis and Imaging  

SciTech Connect (OSTI)

Transmission geometry laser ablation directly into a formed liquid microjunction of a continuous flow liquid microjunction surface sampling probe/electrospray ionization emitter was utilized for molecular and elemental detection and mass spectrometry imaging. The ability to efficiently capture and ionize ablated material was demonstrated by the detection of various small soluble n-mers of polyaniline and silver ion solvent clusters formed from laser ablation of electropolymerized polyaniline and silver thin films, respectively. In addition, analysis of surfaces that contain soluble components was accomplished by coating or laminating the sample with an insoluble film to enable liquid junction formation without directly extracting material from the surface. The ability to perform mass spectrometry imaging at a spatial resolution of about 50 m was illustrated by using laminated inked patterns on a microscope slide. In general, these data demonstrate at least an order of magnitude signal enhancement compared to the non-contact, laser ablation droplet capture-based surface sampling/ionization approaches that have been previously presented.

Ovchinnikova, Olga S [ORNL] [ORNL; Lorenz, Matthias [ORNL] [ORNL; Kertesz, Vilmos [ORNL] [ORNL; Van Berkel, Gary J [ORNL] [ORNL

2013-01-01T23:59:59.000Z

216

Evaluation of potential severe accidents during low power and shutdown operations at Surry, Unit-1: Analysis of core damage frequency from internal events during mid-loop operations. Appendix I, Volume 2, Part 5  

SciTech Connect (OSTI)

Traditionally, probabilistic risk assessments (PRA) of severe accidents in nuclear power plants have considered initiating events potentially occurring only during full power operation. Some previous screening analyses that were performed for other modes of operation suggested that risks during those modes were small relative to full power operation. However, more recent studies and operational experience have implied that accidents during low power and shutdown could be significant contributors to risk. During 1989, the Nuclear Regulatory Commission (NRC) initiated an extensive program to carefully examine the potential risks during low power and shutdown operations. The program includes two parallel projects being performed by Brookhaven National Lab. (BNL) and Sandia National Labs. (SNL). Two plants, Surry (pressurized water reactor) and Grand Gulf (boiling water reactor), were selected as the plants to be studied. The objectives of the program are to assess the risks of severe accidents initiated during plant operational states other than full power operation and to compare the estimated core damage frequencies, important accident sequences and other qualitative and quantitative results with those accidents initiated during full power operation as assessed in NUREG-1150. The objective of this volume of the report is to document the approach utilized in the level-1 internal events PRA for the Surry plant, and discuss the results obtained. A phased approach was used in the level-1 program. In phase 1, which was completed in Fall 1991, a coarse screening analysis examining accidents initiated by internal events (including internal fire and flood) was performed for all plant operational states (POSs). The objective of the phase 1 study was to identify potential vulnerable plant configurations, to characterize (on a high, medium, or low basis) the potential core damage accident scenarios, and to provide a foundation for a detailed phase 2 analysis.

Chu, T.L.; Musicki, Z.; Kohut, P.; Yang, J.; Bozoki, G.; Hsu, C.J.; Diamond, D.J. [Brookhaven National Lab., Upton, NY (United States); Bley, D.; Johnson, D. [PLG Inc., Newport Beach, CA (United States); Holmes, B. [AEA Technology, Dorset (United Kingdom)] [and others

1994-06-01T23:59:59.000Z

217

IBRD Operational Decision Framework  

SciTech Connect (OSTI)

The IBRD Operational Decision Framework in this document is an expansion of an emerging general risk management framework under development by an interagency working group. It provides the level of detail necessary to develop a general Consequence Management Guidance Document for biological contamination remediation and restoration. It is the intent of this document to support both wide area and individual site remediation and restoration activities. This product was initiated as a portion of the IBRD Task 1 Systems Analysis to aid in identification of wide area remediation and restoration shortcomings and gaps. The draft interagency general risk management framework was used as the basis for the analysis. The initial Task 1 analysis document expanded the draft interagency framework to a higher level of resolution, building on both the logic structure and the accompanying text explanations. It was then employed in a qualitative manner to identify responsible agencies, data requirements, tool requirements, and current capabilities for each decision and task. This resulted in identifying shortcomings and gaps needing resolution. Several meetings of a joint LLNL/SNL working group reviewed and approved the initial content of this analysis. At the conclusion of Task 1, work continued on the expanded framework to generate this Operational Decision Framework which is consistent with the existing interagency general risk management framework. A large LLNL task group met repeatedly over a three-month period to develop the expanded framework, coordinate the framework with the biological remediation checklist, and synchronize the logic with the Consequence Management Plan table of contents. The expanded framework was briefed at a large table top exercise reviewing the interagency risk management framework. This exercise had representation from major US metropolitan areas as well as national agencies. This product received positive comments from the participants. Upon completion of the Operational Decision Framework, another joint LLNL/SNL working group conducted a day-long review. Identified modifications were made to the document, resulting in the included product.

Greenwalt, R; Hibbard, W; Raber, E; Carlsen, T; Folks, K; MacQueen, D; Mancieri, S; Bunt, T; Richards, J; Hirabayashi-Dethier, J

2010-11-12T23:59:59.000Z

218

Assessing the Impacts of Reduced Noise Operations of Wind Turbines on Neighbor Annoyance: A Preliminary Analysis in Vinalhaven, Maine  

E-Print Network [OSTI]

of Reduced Noise Operations of Wind Turbines on Neighborof Reduced Noise Operations of Wind Turbines on NeighborWind Speed (m/s) 3 Turbines (in operation at the time) Noise

Hoen, Ben

2010-01-01T23:59:59.000Z

219

Technical documentation in support of the project-specific analysis for construction and operation of the National Ignition Facility  

SciTech Connect (OSTI)

This document provides information that supports or supplements the data and impact analyses presented in the National Ignition Facility (NIF) Project-Specific Analysis (PSA). The purposes of NIF are to achieve fusion ignition in the laboratory for the first time with inertial confinement fusion (ICF) technology and to conduct high- energy-density experiments ins support of national security and civilian application. NIF is an important element in the DOE`s science-based SSM Program, a key mission of which is to ensure the reliability of the nation`s enduring stockpile of nuclear weapons. NIF would also advance the knowledge of basic and applied high-energy- density science and bring the nation a large step closer to developing fusion energy for civilian use. The NIF PSA includes evaluations of the potential environmental impacts of constructing and operating the facility at one of five candidate site and for two design options.

Lazaro, M.A.; Vinikour, W. [Argonne National Lab., IL (United States). Environmental Assessment Div.; Allison, T. [Argonne National Lab., IL (United States). Decision and Information Sciences Div.] [and others

1996-09-01T23:59:59.000Z

220

Regulatory analysis for amendments to regulations for the environmental review for renewal of nuclear power plant operating licenses. Final report  

SciTech Connect (OSTI)

This regulatory analysis provides the supporting information for a proposed rule that will amend the Nuclear Regulatory Commission`s environmental review requirements for applications for renewal of nuclear power plant operating licenses. The objective of the proposed rulemaking is to improve regulatory efficiency by providing for the generic evaluation of certain environmental impacts associated with nuclear plant license renewal. After considering various options, the staff identified and analyzed two major alternatives. With Alternative A, the existing regulations would not be amended. This option requires that environmental reviews be performed under the existing regulations. Alternative B is to assess, on a generic basis, the environmental impacts of renewing the operating license of individual nuclear power plants, and define the issues that will need to be further analyzed on a case-by-case basis. In addition, Alternative B removes from NRC`s review certain economics-related issues. The findings of this assessment are to be codified in 10 CFR 51. The staff has selected Alternative B as the preferred alternative.

NONE

1996-05-01T23:59:59.000Z

Note: This page contains sample records for the topic "analysis continued operation" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

HANFORD DOUBLE SHELL TANK THERMAL AND SEISMIC PROJECT SUMMARY OF COMBINED THERMAL AND OPERATING LOADS WITH SEISMIC ANALYSIS  

SciTech Connect (OSTI)

This report summarizes the results of the Double-Shell Tank Thermal and Operating Loads Analysis (TaLA) combined with the Seismic Analysis. This combined analysis provides a thorough, defensible, and documented analysis that will become a part of the overall analysis of record for the Hanford double-shell tanks (DSTs). The bases of the analytical work presented herein are two ANSYS{reg_sign} finite element models that were developed to represent a bounding-case tank. The TaLA model includes the effects of temperature on material properties, creep, concrete cracking, and various waste and annulus pressure-loading conditions. The seismic model considers the interaction of the tanks with the surrounding soil including a range of soil properties, and the effects of the waste contents during a seismic event. The structural evaluations completed with the representative tank models do not reveal any structural deficiencies with the integrity of the DSTs. The analyses represent 60 years of use, which extends well beyond the current date. In addition, the temperature loads imposed on the model are significantly more severe than any service to date or proposed for the future. Bounding material properties were also selected to provide the most severe combinations. While the focus of the analyses was a bounding-case tank, it was necessary during various evaluations to conduct tank-specific analyses. The primary tank buckling evaluation was carried out on a tank-specific basis because of the sensitivity to waste height, specific gravity, tank wall thickness, and primary tank vapor space vacuum limit. For this analysis, the occurrence of maximum tank vacuum was classified as a service level C, emergency load condition. The only area of potential concern in the analysis was with the buckling evaluation of the AP tank, which showed the current limit on demand of l2-inch water gauge vacuum to exceed the allowable of 10.4 inches. This determination was based on analysis at the design waste temperature of 350 F and the full 60-year corrosion allowance on the tank wall of 0.060 inch. However, analysis at a more realistic temperature of 250 F or corrosion allowance of 0.025 inch results in an acceptable demand/capacity ratio according to the ASME code criteria. Thus, buckling of the primary tank is judged to be unlikely for the current lack of corrosion in the tanks, and the expectation that the maximum waste temperature will not exceed 210 F. The reinforced concrete structure was evaluated as specified by the American Concrete Institute (ACI) code requirements for nuclear safety-related structures (ACI-349). The demand was demonstrated to be lower than the capacity at all locations. Revision 1 is being issued to document changes to the anchor bolt evaluation. RPP-RPT-32237 Rev. 1, Hanford Double-Shell Tank Thermal and Seismic Project-Increased Liquid Level Analysis for 241AP Tank Farms, described changes to the anchor bolt modeling and evaluation which were implemented in response to the independent reviewer's comments. Similar changes have been made in the bounding tank analysis and are documented in RPP-RPT-28968 Rev. 1. The conclusions of the previous releases of this report remain unchanged.

MACKEY TC; DEIBLER JE; RINKER MW; JOHNSON KI; ABATT FG; KARRI NK; PILLI SP; STOOPS KL

2009-01-15T23:59:59.000Z

222

Bohmian Mechanics with Discrete Operators  

E-Print Network [OSTI]

A deterministic Bohmian mechanics for operators with continuous and discrete spectra is presented. Randomness enters only through initial conditions. Operators with discrete spectra are incorporated into Bohmian mechanics by associating with each operator a continuous variable in which a finite range of the continuous variable correspond to the same discrete eigenvalue. In this way Bohmian mechanics can handle the creation and annihilation of particles. Examples are given and generalizations are discussed.

R. A. Hyman; Shane A. Caldwell; Edward Dalton

2004-01-02T23:59:59.000Z

223

ANALYSIS OF TRITIUM/DEUTERIUM RETENTION AND PERMEATION IN FW/DIVERTOR INCLUDING GEOMETRIC AND TEMPERATURE OPERATING FEATURES  

E-Print Network [OSTI]

AND TEMPERATURE OPERATING FEATURES Alice Ying, Haibo Liu, Mohamed Abdou Mechanical and Aerospace Engineering

Abdou, Mohamed

224

SINGLE-SHELL TANK INTEGRITY PROJECT ANALYSIS OF RECORD-PRELIMINARY MODELING PLAN FOR THERMAL AND OPERATING LOADS  

SciTech Connect (OSTI)

This document is a Phase I deliverable for the Single-Shell Tank Analysis of Record effort. This document is not the Analysis of Record. The intent of this document is to guide the Phase II detailed modeling effort. Preliminary finite element models for each of the tank types were developed and different case studies were performed on one or more of these tank types. Case studies evaluated include thermal loading, waste level variation, the sensitivity of boundary effects (soil radial extent), excavation slope or run to rise ratio, soil stratigraphic (property and layer thickness) variation at different farm locations, and concrete material property variation and their degradation under thermal loads. The preliminary analysis document reviews and preliminary modeling analysis results are reported herein. In addition, this report provides recommendations for the next phase of the SST AOR project, SST detailed modeling. Efforts and results discussed in this report do not include seismic modeling as seismic modeling is covered by a separate report. The combined results of both static and seismic models are required to complete this effort. The SST AOR project supports the US Department of Energy's (DOE) Office of River Protection (ORP) mission for obtaining a better understanding of the structural integrity of Hanford's SSTs. The 149 SSTs, with six different geometries, have experienced a range of operating histories which would require a large number of unique analyses to fully characterize their individual structural integrity. Preliminary modeling evaluations were conducted to determine the number of analyses required for adequate bounding of each of the SST tank types in the Detailed Modeling Phase of the SST AOR Project. The preliminary modeling was conducted in conjunction with the Evaluation Criteria report, Johnson et al. (2010). Reviews of existing documents were conducted at the initial stage of preliminary modeling. These reviews guided the topics that were explored in the SST preliminary modeling. The reviews determined the level of detail necessary to perform the analyses of the SSTs. To guide the Phase II detailed modeling effort, preliminary finite element models for each of the tank types were developed and different case studies were performed on one or more of these tank types. Case studies evaluated include thermal loading, waste level variation, the sensitivity of boundary effects (soil radial extent), excavation slope or run to rise ratio, soil stratigraphic (property and layer thickness) variation at different farm locations, and concrete material property variation and their degradation under thermal loads. Conclusions were derived from case studies on one of the tank types when no additional runs of similar cases on other types of tanks were found necessary to derive those conclusions. The document reviews provided relatively complete temperature histories for Type IV tanks. The temperature history data for Type I, II, and III tanks was almost nonexistent for years prior to 1975. Document reviews indicate that there might be additional useful data in the US Department of Energy, Richland Operations Office (DOE-RL) records in Seattle, WA, and these records need to be reviewed to extract data that might have been disregarded during previous reviews. Thermal stress analyses were conducted using different temperature distribution scenarios on Type IV tanks. Such studies could not be carried out for other tank types due to lack of temperature history data. The results from Type IV tank analyses indicate that factors such as temperature distribution in the tank waste and rate of rise in waste temperature have a significant impact on the thermal stresses in the tank structures. Overall, the conclusion that can drawn from the thermal stress analyses is that these studies should be carried out for all tank types during the detailed analysis phase with temperature values that are reasonably close to the typical temperature histories of the respective tank types. If and/or when additional waste temperature data

RAST RS; RINKER MW; BAPANAALLI SK; DEIBLER JE; GUZMAN-LEONG CE; JOHNSON KI; KARRI NK; PILLI SP; SANBORN SE

2010-10-22T23:59:59.000Z

225

Continuous Improvement Energy Projects Reduce Energy Consumption  

E-Print Network [OSTI]

Continuous Improvement Energy Projects Reduce Energy Consumption Eric Niemeyer, Operations Superintendent Drilling Specialties Company A division of Chevron Phillips Chemical Company LP ESL-IE-14-05-31 Proceedings of the Thrity...

Niemeyer, E.

2014-01-01T23:59:59.000Z

226

Continuous-wave, pair-pumped laser  

SciTech Connect (OSTI)

We report room-temperature operation of what we believe is the first continuous-wave laser that relies exclusively on cooperative upconversion by coupled ion pairs to achieve population inversion.

Xie, P.; Rand, S.C. (Department of Electrical Engineering and Computer Science, University of Michigan, 1301 Beal Avenue, Ann Arbor, MI (USA))

1990-08-01T23:59:59.000Z

227

Assessing the Impacts of Reduced Noise Operations of Wind Turbines on Neighbor Annoyance: A Preliminary Analysis in Vinalhaven, Maine  

E-Print Network [OSTI]

only self-reported wind and turbine sound levels were used.Noise Operations of Wind Turbines on Neighbor Annoyance: ANoise Operations of Wind Turbines on Neighbor Annoyance: A

Hoen, Ben

2010-01-01T23:59:59.000Z

228

Comparative Performance Analysis of IADR Operating in Natural Gas-Fired and Waste-Heat CHP Modes  

SciTech Connect (OSTI)

Fuel utilization can be dramatically improved through effective recycle of 'waste' heat produced as a by-product of on-site or near-site power generation technologies. Development of modular compact cooling, heating, and power (CHP) systems for end-use applications in commercial and institutional buildings is a key part of the Department of Energy's (DOE) energy policy. To effectively use the thermal energy from a wide variety of sources which is normally discarded to the ambient, many components such as heat exchangers, boilers, absorption chillers, and desiccant dehumidification systems must be further developed. Recently a compact, cost-effective, and energy-efficient integrated active-desiccant vapor-compression hybrid rooftop (IADR) unit has been introduced in the market. It combines the advantages of an advanced direct-expansion cooling system with the dehumidification capability of an active desiccant wheel. The aim of this study is to compare the efficiency of the IADR operation in baseline mode, when desiccant wheel regeneration is driven by a natural gas burner, and in CHP mode, when the waste heat recovered from microturbine exhaust gas is used for desiccant regeneration. Comparative analysis shows an excellent potential for more efficient use of the desiccant dehumidification as part of a CHP system and the importance of proper sizing of the CHP components. The most crucial factor in exploiting the efficiency of this application is the maximum use of thermal energy recovered for heating of regeneration air.

Petrov, Andrei Y [ORNL; Sand, James R [ORNL; Zaltash, Abdolreza [ORNL

2006-01-01T23:59:59.000Z

229

Exergy Analysis and Operational Efficiency of a Horizontal Ground Source Heat Pump System Operated in a Low-Energy Test House under Simulated Occupancy Conditions  

SciTech Connect (OSTI)

This paper presents data, analyses, measures of performance, and conclusions for a ground-source heat pump (GSHP) providing space conditioning to a 345m2 house whose envelope is made of structural insulated panels (SIP). The entire thermal load of this SIP house with RSI-3.7 (RUS-21) walls, triple pane windows with a U-factor of 1.64 W/m2 K (0.29 Btu/h ft2 oF) and solar heat gain coefficient (SHGC) of 0.25, a roof assembly with overall thermal resistance of about RSI-8.8 (RUS-50) and low leakage rates of 0.74 ACH at 50Pa was satisfied with a 2.16-Ton (7.56 kW) GSHP unit consuming negligible (9.83kWh) auxiliary heat during peak winter season. The highest and lowest heating COP achieved was 4.90 (October) and 3.44 (February), respectively. The highest and lowest cooling COP achieved was 6.09 (April) and 3.88 (August). These COPs are calculated on the basis of the total power input (including duct, ground loop, and control power losses ). The second Law (Exergy) analysis provides deep insight into how systemic inefficiencies are distributed among the various GSHP components. Opportunities for design and further performance improvements are identified. Through Exergy analysis we provide a true measure of how closely actual performance approaches the ideal, and it unequivocally identifies, better than energy analysis does, the sources and causes of lost work, the root cause of system inefficiencies.

Ally, Moonis Raza [ORNL; Baxter, Van D [ORNL; Munk, Jeffrey D [ORNL; Gehl, Anthony C [ORNL

2012-01-01T23:59:59.000Z

230

THERMAL ANALYSIS OF A SOLID BREEDER TBM UNDER ITER OPERATIONAL CONDITIONS A. Abou-Sena, A. Ying, M. Youssef, M. Abdou  

E-Print Network [OSTI]

@engineering.ucla.edu The Quarter Port Submodule (QPS) was proposed as a Solid Breeder (SB) Test Blanket Module under the US program candidates to serve as tritium breeder for the SB blankets. The SB and Be, in form of pebble bedsTHERMAL ANALYSIS OF A SOLID BREEDER TBM UNDER ITER OPERATIONAL CONDITIONS A. Abou-Sena, A. Ying, M

Abdou, Mohamed

231

To cite this document: Gouache, Thibault and Morlier, Joseph and Michon, Guilhem and Coulange, Baptiste Operational modal analysis with non stationnary  

E-Print Network [OSTI]

-situ and uncontrolled vibrations to be used to lead modal analysis of structures. In reality operational vibrations are a combination of numerous excitations sources that are much more complex than a random white noise or a harmonic hypothesis that the input or force applied to the structure to be analyzed is a stationary white noise

Mailhes, Corinne

232

Hanford year 2000 Business Continuity Plan  

SciTech Connect (OSTI)

The goal of Department of Energy Richland Operations (DOE-RL) Year 2000 (Y2K) effort is to ensure that the Hanford site successfully continues its mission as we approach and enter the 21th century. The Y2K Business Continuity Planning process provides a structured approach to identify Y2K risks to the site and to mitigate these risks through Y2K Contingency Planning, ''Zero-Day'' Transition Planning and Emergency Preparedness. This document defines the responsibilities, processes and plans for Hanford's Y2K Business Continuity. It identifies proposed business continuity drills, tentative schedule and milestones.

ROGGENKAMP, S.L.

1999-11-01T23:59:59.000Z

233

EIS-0426: Site-Wide Environmental Impact Statement for Continued...  

Office of Environmental Management (EM)

Site-Wide Environmental Impact Statement for Continued Operation of the Department of Energy National Nuclear Security Administration Nevada National Security Site and Off-Site...

234

EIS-0426: Site-Wide Environmental Impact Statement for Continued...  

Energy Savers [EERE]

6: Site-Wide Environmental Impact Statement for Continued Operation of the Department of Energy National Nuclear Security Administration Nevada National Security Site and...

235

Atomizing, continuous, water monitoring module  

DOE Patents [OSTI]

A system for continuously analyzing volatile constituents of a liquid is described. The system contains a pump for continuously pumping the liquid to be tested at a predetermined flow rate into an extracting container through a liquid directing tube having an orifice at one end and positioned to direct the liquid into the extracting container at a flow rate sufficient to atomize the liquid within the extracting container. A continuous supply of helium carrier gas at a predetermined flow rate is directed through a tube into the extracting container and co-mingled with the atomized liquid to extract the volatile constituents contained within the atomized liquid. The helium containing the extracted volatile constituents flows out of the extracting container into a mass spectrometer for an analysis of the volatile constituents of the liquid.

Thompson, Cyril V. (Knoxville, TN); Wise, Marcus B. (Kingston, TN)

1997-01-01T23:59:59.000Z

236

Atomizing, continuous, water monitoring module  

DOE Patents [OSTI]

A system for continuously analyzing volatile constituents of a liquid is described. The system contains a pump for continuously pumping the liquid to be tested at a predetermined flow rate into an extracting container through a liquid directing tube having an orifice at one end and positioned to direct the liquid into the extracting container at a flow rate sufficient to atomize the liquid within the extracting container. A continuous supply of helium carrier gas at a predetermined flow rate is directed through a tube into the extracting container and co-mingled with the atomized liquid to extract the volatile constituents contained within the atomized liquid. The helium containing the extracted volatile constituents flows out of the extracting container into a mass spectrometer for an analysis of the volatile constituents of the liquid. 3 figs.

Thompson, C.V.; Wise, M.B.

1997-07-08T23:59:59.000Z

237

Melt extrusion and continuous manufacturing of pharmaceutical materials  

E-Print Network [OSTI]

Melt extrusion is an alternative processing technique that operates continuously, reduces the total number of unit operations, allows for incorporation of difficult-to-process drug substances, and has the potential to ...

Bell, Erin R

2011-01-01T23:59:59.000Z

238

Evaluation of potential severe accidents during low power and shutdown operations at Surry, Unit 1. Volume 5: Analysis of core damage frequency from seismic events during mid-loop operations  

SciTech Connect (OSTI)

In 1989 the US Nuclear Regulatory Commission (NRC) initiated an extensive program to examine carefully the potential risks during low-power and shutdown operations. The program included two parallel projects, one at Brookhaven National Laboratory studying a pressurized water reactor (Surry Unit 1) and the other at Sandia National Laboratories studying a boiling water reactor (Grand Gulf). Both the Brookhaven and Sandia projects have examined only accidents initiated by internal plant faults--so-called ``internal initiators.`` This project, which has explored the likelihood of seismic-initiated core damage accidents during refueling shutdown conditions, is complementary to the internal-initiator analyses at Brookhaven and Sandia. This report covers the seismic analysis at Surry Unit 1. All of the many systems modeling assumptions, component non-seismic failure rates, and human error rates that were used in the internal-initiator study at Surry have been adopted here, so that the results of the two studies can be as comparable as possible. Both the Brookhaven study and this study examine only two shutdown plant operating states (POSs) during refueling outages at Surry, called POS 6 and POS 10, which represent mid-loop operation before and after refueling, respectively. This analysis has been limited to work analogous to a level-1 seismic PRA, in which estimates have been developed for the core-damage frequency from seismic events during POSs 6 and 10. The results of the analysis are that the core-damage frequency of earthquake-initiated accidents during refueling outages in POS 6 and POS 10 is found to be low in absolute terms, less than 10{sup {minus}6}/year.

Budnitz, R.J. [Future Resources Associates, Inc., Berkeley, CA (United States); Davis, P.R. [PRD Consulting (United States); Ravindra, M.K.; Tong, W.H. [EQE International, Inc., Irvine, CA (United States)

1994-08-01T23:59:59.000Z

239

MANUFACTURING & SERVICE OPERATIONS MANAGEMENT  

E-Print Network [OSTI]

MANUFACTURING & SERVICE OPERATIONS MANAGEMENT Vol. 14, No. 4, Fall 2012, pp. 495­511 ISSN 1523 research directions, expanding upon the key points raised by Green [Green LV (2012) The vital role of operations analysis in improving healthcare delivery. Manufacturing Service Oper. Management 14

Boucherie, Richard J.

240

Equipment Operational Requirements  

SciTech Connect (OSTI)

The Iraq Department of Border Enforcement is rich in personnel, but poor in equipment. An effective border control system must include detection, discrimination, decision, tracking and interdiction, capture, identification, and disposition. An equipment solution that addresses only a part of this will not succeed, likewise equipment by itself is not the answer without considering the personnel and how they would employ the equipment. The solution should take advantage of the existing in-place system and address all of the critical functions. The solutions are envisioned as being implemented in a phased manner, where Solution 1 is followed by Solution 2 and eventually by Solution 3. This allows adequate time for training and gaining operational experience for successively more complex equipment. Detailed descriptions of the components follow the solution descriptions. Solution 1 - This solution is based on changes to CONOPs, and does not have a technology component. It consists of observers at the forts and annexes, forward patrols along the swamp edge, in depth patrols approximately 10 kilometers inland from the swamp, and checkpoints on major roads. Solution 2 - This solution adds a ground sensor array to the Solution 1 system. Solution 3 - This solution is based around installing a radar/video camera system on each fort. It employs the CONOPS from Solution 1, but uses minimal ground sensors deployed only in areas with poor radar/video camera coverage (such as canals and streams shielded by vegetation), or by roads covered by radar but outside the range of the radar associated cameras. This document provides broad operational requirements for major equipment components along with sufficient operational details to allow the technical community to identify potential hardware candidates. Continuing analysis will develop quantities required and more detailed tactics, techniques, and procedures.

Greenwalt, B; Henderer, B; Hibbard, W; Mercer, M

2009-06-11T23:59:59.000Z

Note: This page contains sample records for the topic "analysis continued operation" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

OESYS : a simulation tool for non-conventional energy applications analysis : theoretical and operational description with user documentation  

E-Print Network [OSTI]

A method is developed for assessing both the operational and economic performance of variable mixes of energy conversion technologies within their specific service environments. This method is incorporated into OESYS ...

Dinwoodie, Thomas L.

1980-01-01T23:59:59.000Z

242

Nickel-based superalloy operating temperature determination via analysis of gamma/gamma' microstructure and coating/base material interdiffusion  

E-Print Network [OSTI]

The average operating temperature of RENÉ N5® high pressure turbine blades was evaluated via [gamma]/[gamma]' microstructure and coating/base metal interdiffusion methods. The [gamma]' volume fraction was measured by point ...

Ham, Wendy D. (Wendy Decker)

2005-01-01T23:59:59.000Z

243

Engineering Design, Construction, Operation and Analysis of the 2007 Texas A&M University Solar Decathlon House  

E-Print Network [OSTI]

This report presents the design, construction, and operation of a 100% solar-powered house from an engineering perspective. This includes energy simulation results, selection of systems, design of systems, assembly of systems, integration between...

Ramirez, Eduardo

2008-06-10T23:59:59.000Z

244

Engineering Design, Construction, Operation and Analysis of the 2007 Texas A&M University Solar Decathlon House  

E-Print Network [OSTI]

This report presents the design, construction, and operation of a 100% solar-powered house from an engineering perspective. This includes energy simulation results, selection of systems, design of systems, assembly of systems, integration between...

Ramirez, E. J.

245

A Robust Four-Fluid Transient Flow Simulator as an Analysis and Decision Making Tool for Dynamic Kill Operation  

E-Print Network [OSTI]

The worst scenario of drilling operation is blowout which is uncontrolled flow of formation fluid into the wellbore. Blowouts result in environmental damage with potential risk of injuries and fatalities. Although not all blowouts result in disaster...

Haghshenas, Arash

2013-04-24T23:59:59.000Z

246

An Analysis of the health impacts from PM and NOx emissions resulting from train operations in the Alameda Corridor, CA  

E-Print Network [OSTI]

2009). Estimating PM and NOx Train Emissions in the AlamedaAuthority. Number of Trains Running on the Alameda Corridor.x emissions resulting from train operations in the Alameda

Sangkapichai, Mana; Saphores, Jean-Daniel M; Ogunseitan, Oladele; Ritchie, Stephen G.; You, Soyoung Iris; Lee, Gunwoo

2010-01-01T23:59:59.000Z

247

Fractions continues Michel Waldschmidt  

E-Print Network [OSTI]

´erentes oeuvres d'art, 2 appara^it aussi dans des oeuvres artistiques persanes. 2 #12;Figure 1. Fraction continue

Waldschmidt, Michel

248

Safety analysis for operating the Annular Core Research Reactor with Cintichem-type targets installed in the central region of the core  

SciTech Connect (OSTI)

Production of the molybdenum-99 isotope at the Annular Core Research Reactor requires highly enriched, uranium oxide loaded targets to be irradiated for several days in the high neutron-flux region of the core. This report presents the safety analysis for the irradiation of up to seven Cintichem-type targets in the central region of the core and compares the results to the Annular Core Research Reactor Safety Analysis Report. A 19 target grid configuration is presented that allows one to seven targets to be irradiated, with the remainder of the grid locations filled with aluminum ''void'' targets. Analyses of reactor, neutronic, thermal hydraulics, and heat transfer calculations are presented. Steady-state operation and accident scenarios are analyzed with the conclusion that the reactor can be operated safely with seven targets in the grid, and no additional risk to the public.

PARMA JR.,EDWARD J.

2000-01-01T23:59:59.000Z

249

Evaluation of potential severe accidents during low power and shutdown operations at Grand Gulf, Unit 1. Volume 5: Analysis of core damage frequency from seismic events for plant operational state 5 during a refueling outage  

SciTech Connect (OSTI)

In 1989 the US Nuclear Regulatory Commission (NRC) initiated an extensive program to examine carefully the potential risks during low-power and shutdown operations. The program included two parallel projects, one at Sandia National Laboratories studying a boiling water reactor (Grand Gulf), and the other at Brookhaven National Laboratory studying a pressurized water reactor (Surry Unit 1). Both the Sandia and Brookhaven projects have examined only accidents initiated by internal plant faults---so-called ``internal initiators.`` This project, which has explored the likelihood of seismic-initiated core damage accidents during refueling outage conditions, is complementary to the internal-initiator analyses at Brookhaven and Sandia. This report covers the seismic analysis at Grand Gulf. All of the many systems modeling assumptions, component non-seismic failure rates, and human effort rates that were used in the internal-initiator study at Grand Gulf have been adopted here, so that the results of the study can be as comparable as possible. Both the Sandia study and this study examine only one shutdown plant operating state (POS) at Grand Gulf, namely POS 5 representing cold shutdown during a refueling outage. This analysis has been limited to work analogous to a level-1 seismic PRA, in which estimates have been developed for the core-damage frequency from seismic events during POS 5. The results of the analysis are that the core-damage frequency for earthquake-initiated accidents during refueling outages in POS 5 is found to be quite low in absolute terms, less than 10{sup {minus}7}/year.

Budnitz, R.J. [Future Resources Associates, Inc., Berkeley, CA (United States); Davis, P.R. [PRD Consulting (United States); Ravindra, M.K.; Tong, W.H. [EQE International, Inc., Irvine, CA (United States)

1994-08-01T23:59:59.000Z

250

An analysis of processing methods and a comparison of operational efficiencies in ten Texas broiler processing plants  

E-Print Network [OSTI]

OF CONTENTS INTHODUCTIONe ~ e ~ ~ ~ ~ ~ i ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ oe ~ 1 REVIEW OF LITEHATUHEo ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ 2 METHOD OF PHOCEDUHE ~ ~ ~ ~ ~ ~ ~ i ~ ~ e ~ ~ ~ ~ e ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ 5 RESULTS... TABLE 19 Number of Workers Used in the Ice Packing Operation in Ten Processing Plants ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ 1 ~ ~ ~ ~ ~ ~ i ~ ~ ~ ~ ~ ~ ~ ~ 0 40 Broilers Packed per Man Hour in Ten Processing Plants - Ice Pack. . . i...

Gardner, Frederick Albert

1955-01-01T23:59:59.000Z

251

The continuous knapsack set  

E-Print Network [OSTI]

that when n = 3, the non-zero coefficients of the continuous variables can take ... Vachani [6] studied the single arc design problem as a subproblem of the net-.

2014-08-29T23:59:59.000Z

252

What is Continual Learning?  

Broader source: Energy.gov [DOE]

Continual Learning is a change initiative which is used to help develop and grow a learning culture within DOE. Employee development in any organization and at any level is never ending.

253

Continuous sulfur removal process  

DOE Patents [OSTI]

A continuous process for the removal of hydrogen sulfide from a gas stream using a membrane comprising a metal oxide deposited on a porous support is disclosed. 4 figures.

Jalan, V.; Ryu, J.

1994-04-26T23:59:59.000Z

254

Evaluation of potential severe accidents during low power and shutdown operations at Surry, Unit 1: Analysis of core damage frequency from internal floods during mid-loop operations. Volume 4  

SciTech Connect (OSTI)

The major objective of the Surry internal flood analysis was to provide an improved understanding of the core damage scenarios arising from internal flood-related events. The mean core damage frequency of the Surry plant due to internal flood events during mid-loop operations is 4.8E-06 per year, and the 5th and 95th percentiles are 2.2E-07 and 1.8E-05 per year, respectively. Some limited sensitivity calculations were performed on three plant improvement options. The most significant result involves modifications of intake-level structure on the canal, which reduced core damage frequency contribution from floods in mid-loop by about 75%.

Kohut, P. [Brookhaven National Lab., Upton, NY (United States)

1994-07-01T23:59:59.000Z

255

Analysis of radiation exposure for Naval personnel at Operation Castle. Technical report, 1 January 1983-31 January 1984  

SciTech Connect (OSTI)

Film-badge doses are reconstructed for sixteen ships and the residence islands of Enewetak and Kwajalein Atolls resulting from the six nuclear detonations comprising Operation CASTLE (March-May 1954). Fallout from Shots BRAVO and ROMEO was the major source of contamination on most of the ships and islands. Varying amounts of fallout from Shots UNION, YANKEE, and NECTAR contributed somewhat to the total doses of the shipboard and island-based personnel; no fallout was experienced as a result of Shot KOON. Shipboard personnel received additional exposure from hulls and salt water piping systems that had become contaminated from operating in the radioactive waters of Bikini Lagoon. From the reconstructed radiation environments, both topside and below, an equivalent film badge dose is calculated and compared to actual dosimetry data. Agreement is very good during badged periods when the ships received significant fallout. When topside intensities were not documented, generally late in the operation when intensity levels were low, agreement is not as good. Calculated ship contamination doses of significance are in excellent agreement with limited available dosimetry data. Calculated average doses for shipboard personnel range from a low of 0.19 rem for the crew of the USS LST-825 to a high of 3.56 rem for the crew of the USS PHILIP. Average doses on the residence islands of Enewetak and Kwajalein Atolls are 1.09 rem and 0.32 rem, respectively.

Thomas, C.; Goetz, J.; Klemm, J.; Weitz, R.

1984-02-28T23:59:59.000Z

256

TESTING AND PERFORMANCE ANALYSIS OF NASA 5 CM BY 5 CM BI-SUPPORTED SOLID OXIDE ELECTROLYSIS CELLS OPERATED IN BOTH FUEL CELL AND STEAM ELECTROLYSIS MODES  

SciTech Connect (OSTI)

A series of 5 cm by 5 cm bi-supported Solid Oxide Electrolysis Cells (SOEC) were produced by NASA for the Idaho National Laboratory (INL) and tested under the INL High Temperature Steam Electrolysis program. The results from the experimental demonstration of cell operation for both hydrogen production and operation as fuel cells is presented. An overview of the cell technology, test apparatus and performance analysis is also provided. The INL High Temperature Steam Electrolysis laboratory has developed significant test infrastructure in support of single cell and stack performance analyses. An overview of the single cell test apparatus is presented. The test data presented in this paper is representative of a first batch of NASA's prototypic 5 cm by 5 cm SOEC single cells. Clearly a significant relationship between the operational current density and cell degradation rate is evident. While the performance of these cells was lower than anticipated, in-house testing at NASA Glenn has yielded significantly higher performance and lower degradation rates with subsequent production batches of cells. Current post-test microstructure analyses of the cells tested at INL will be published in a future paper. Modification to cell compositions and cell reduction techniques will be altered in the next series of cells to be delivered to INL with the aim to decrease the cell degradation rate while allowing for higher operational current densities to be sustained. Results from the testing of new batches of single cells will be presented in a future paper.

R. C. O'Brien; J. E. O'Brien; C. M. Stoots; X. Zhang; S. C. Farmer; T. L. Cable; J. A. Setlock

2011-11-01T23:59:59.000Z

257

Jefferson Lab accelerator upgrade completed: Initial operations...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

DOE to begin initial operations of the Continuous Electron Beam Accelerator Facility (CEBAF) as part of its ongoing 338 million upgrade. With the approval of Critical...

258

Voluntary Protection Program Onsite Review, Livermore Operations- January 2012  

Broader source: Energy.gov [DOE]

Evaluation to determine whether the Livermore Operations is continuing to perform at a level deserving DOE-VPP Star recognition.

259

Voluntary Protection Program Onsite Review, Los Alamos Operations- November 2011  

Broader source: Energy.gov [DOE]

Evaluation to determine whether Los Alamos Operations is continuing to perform at a level deserving DOE-VPP Star recognition.

260

A Continuity Theorem for Stinespring's Dilation  

E-Print Network [OSTI]

We show a continuity theorem for Stinespring's dilation: two completely positive maps between arbitrary C*-algebras are close in cb-norm iff we can find corresponding dilations that are close in operator norm. The proof establishes the equivalence of the cb-norm distance and the Bures distance for completely positive maps. We briefly discuss applications to quantum information theory.

Kretschmann, Dennis; Werner, Reinhard F

2007-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "analysis continued operation" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Design, Construction, Transportation, Operation and Post-Occupancy Analysis for the Texas A&M Solar Decathlon House  

E-Print Network [OSTI]

configurations, yet be completely powered from the solar radiation that falls on the footprint of the structure. To accomplish this, the Texas A&M team designed and simulated varying designs using building energy simulation (DOE-2), solar thermal analysis (F...

Malhotra, M.; Ramirez, E.; Im, P.; Cho, S.; Canez, J.; Haberl, J.; Schaider, N.; Fisk, P.; Feigenbaum, L.

262

A Multi-Scale Analysis Scheme on Abelian Groups with an Application to Operators Dual to Hill's Equation  

E-Print Network [OSTI]

We present an abstract multiscale analysis scheme for matrix functions $(H_{\\varepsilon}(m,n))_{m,n\\in \\mathfrak{T}}$, where $\\mathfrak{T}$ is an Abelian group equipped with a distance $|\\cdot|$. This is an extension of the scheme developed by Damanik and Goldstein for the special case $\\mathfrak{T} = \\mathbb{Z}^\

David Damanik; Michael Goldstein; Milivoje Lukic

2014-09-28T23:59:59.000Z

263

Analysis of operations and cyber security policies for a system of cooperating Flexible Alternating Current Transmission System (FACTS) devices.  

SciTech Connect (OSTI)

Flexible Alternating Current Transmission Systems (FACTS) devices are installed on electric power transmission lines to stabilize and regulate power flow. Power lines protected by FACTS devices can increase power flow and better respond to contingencies. The University of Missouri Rolla (UMR) is currently working on a multi-year project to examine the potential use of multiple FACTS devices distributed over a large power system region in a cooperative arrangement in which the FACTS devices work together to optimize and stabilize the regional power system. The report describes operational and security challenges that need to be addressed to employ FACTS devices in this way and recommends references, processes, technologies, and policies to address these challenges.

Phillips, Laurence R.; Tejani, Bankim; Margulies, Jonathan; Hills, Jason L.; Richardson, Bryan T.; Baca, Micheal J.; Weiland, Laura

2005-12-01T23:59:59.000Z

264

Evaluation of potential severe accidents during low power and shutdown operations at Grand Gulf, Unit 1. Volume 2, Part 1C: Analysis of core damage frequency from internal events for plant operational State 5 during a refueling outage, Main report (Sections 11--14)  

SciTech Connect (OSTI)

This document contains the accident sequence analysis of internally initiated events for Grand Gulf, Unit 1 as it operates in the Low Power and Shutdown Plant Operational State 5 during a refueling outage. The report documents the methodology used during the analysis, describes the results from the application of the methodology, and compares the results with the results from two full power analyses performed on Grand Gulf.

Whitehead, D. [Sandia National Labs., Albuquerque, NM (United States); Darby, J. [Science and Engineering Associates, Inc., Albuquerque, NM (United States); Yakle, J. [Science Applications International Corp., Albuquerque, NM (United States)] [and others

1994-06-01T23:59:59.000Z

265

Continuously variable focal length lens  

DOE Patents [OSTI]

A material preferably in crystal form having a low atomic number such as beryllium (Z=4) provides for the focusing of x-rays in a continuously variable manner. The material is provided with plural spaced curvilinear, optically matched slots and/or recesses through which an x-ray beam is directed. The focal length of the material may be decreased or increased by increasing or decreasing, respectively, the number of slots (or recesses) through which the x-ray beam is directed, while fine tuning of the focal length is accomplished by rotation of the material so as to change the path length of the x-ray beam through the aligned cylindrical slows. X-ray analysis of a fixed point in a solid material may be performed by scanning the energy of the x-ray beam while rotating the material to maintain the beam's focal point at a fixed point in the specimen undergoing analysis.

Adams, Bernhard W; Chollet, Matthieu C

2013-12-17T23:59:59.000Z

266

2013 (COOP) Continuity of Operations Awareness Annual Training  

Broader source: Energy.gov [DOE]

Date: Must be completed by September 30, 2013.Time: Online (30-45 min)Registration link: DOE/NNSA employees can access OLC directly through ESS. Others need to use the OLC link

267

Continuity of Operations at Bonneville Power Administration, IG-0781 |  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-Up fromDepartmentTieCelebrate Earth CodestheatforContacts ContactsDepartment of

268

Relativistic Heavy Ion Collider | The Case for Continuing Operations  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 -the Mid-Infrared at 278, 298,NIST31 ORV 15051 Modification MOThe Case for

269

Drilling continues upward momentum  

SciTech Connect (OSTI)

This paper discusses how the drilling recovery that began during the second half of 1989 is continuing into 1990. On top of this, the Iraqi invasion of Kuwait has caused disarray in oil markets, driving up oil prices, and disrupting access to oil supplies. Potentially, this upheaval could lead to an upward spike in worldwide drilling activity.

Moritis, G.

1990-09-24T23:59:59.000Z

270

PROGRESS REPORT CONTINUATION REQUEST  

E-Print Network [OSTI]

PROGRESS REPORT and CONTINUATION REQUEST SUBMITTED TO THE U.S. DEPARTMENT OF ENERGY BY Prof (year 2): $135,000 Unexpended Balance from Previous Year: $0 #12;2 Abstract of FY 2005 Research City. Prof. Odile Eisenstein and Dr. Eric Clot at the University of Montpellier, France Overview

Jones, William D.

271

Analysis of radiation exposure for naval units of Operation Crossroads. Volume 2. (Appendix A) target ships. Technical report  

SciTech Connect (OSTI)

External radiation doses are reconstructed for crews of support and target ships of Joint Task Force One at Operation CROSSROADS, 1946. Volume I describes the reconstruction methodology, which consists of modeling the radiation environment, to include the radioactivity of lagoon water, target ships, and support ship contamination; retracing ship paths through this environment; and calculating the doses to shipboard personnel. The USS RECLAIMER, a support ship, is selected as a representative ship to demonstrate this methodology. Doses for all other ships are summarized. Volume II (Appendix A) details the results for target ship personnel. Volume III (Appendix B) details the results for support ship personnel. Calculated doses for more than 36,000 personnel aboard support ships while at Bikini range from zero to 1.7 rem. Of those, approximately 34,000 are less than 0.5 rem. From the models provided, doses due to target ship reboarding and doses accrued after departure from Bikini can be calculated, based on the individual circumstances of exposure.

Weitz, R.; Thomas, C.; Klemm, J.; Stuart, J.; Knowles, M.

1982-03-03T23:59:59.000Z

272

Analysis of radiation exposure for naval units of Operation Crossroads. Volume 3. (Appendix B) support ships. Technical report  

SciTech Connect (OSTI)

External radiation doses are reconstructed for crews of support and target ships of Joint Task Force One at Operation CROSSROADS, 1946. Volume I describes the reconstruction methodology, which consists of modeling the radiation environment, to include the radioactivity of lagoon water, target ships, and support ship contamination; retracing ship paths through this environment; and calculating the doses to shipboard personnel. The USS RECLAIMER, a support ship, is selected as a representative ship to demonstrate this methodology. Doses for all other ships are summarized. Volume II (Appendix A) details the results for target ship personnel. Volume III (Appendix B) details the results for support ship personnel. Calculated doses for more than 36,000 personnel aboard support ships while at Bikini range from zero to 1.7 rem. Of those approximately 34,000 are less than 0.5 rem. From the models provided, doses due to target ship reboarding and doses accrued after departure from Bikini can be calculated, based on the individual circumstances of exposure.

Weitz, R.; Thomas, C.; Klemm, J.; Stuart, J.; Knowles, M.

1982-03-03T23:59:59.000Z

273

Continuous steel production and apparatus  

SciTech Connect (OSTI)

A process for continuous refining of steel via multiple distinct reaction vessels for melting, oxidation, reduction, and refining for delivery of steel continuously to, for example, a tundish of a continuous caster system, and associated apparatus.

Peaslee, Kent D. (Rolla, MO); Peter, Jorg J. (McMinnville, OR); Robertson, David G. C. (Rolla, MO); Thomas, Brian G. (Champaign, IL); Zhang, Lifeng (Trondheim, NO)

2009-11-17T23:59:59.000Z

274

EPR-Steering measure for two-mode continuous variable states  

E-Print Network [OSTI]

Steering is a manifestation of quantum correlations that embodies the Einstein-Podolsky-Rosen (EPR) paradox. While there have been recent attempts to quantify steering, continuous variable systems remained elusive. We introduce a steering measure for two-mode continuous variable systems that is valid for arbitrary states. The measure is based on the violation of an optimized variance test for the EPR paradox, and admits a computable and experimentally friendly lower bound only depending on the second moments of the state, which reduces to a recently proposed quantifier of steerability by Gaussian measurements. We further show that Gaussian states are extremal with respect to our measure, minimizing it among all continuous variable states with fixed second moments. As a byproduct of our analysis, we generalize and relate well-known EPR-steering criteria. Finally an operational interpretation is provided, as the proposed measure is shown to quantify the optimal guaranteed key rate in semi-device independent qua...

Kogias, Ioannis

2014-01-01T23:59:59.000Z

275

EPR-Steering measure for two-mode continuous variable states  

E-Print Network [OSTI]

Steering is a manifestation of quantum correlations that embodies the Einstein-Podolsky-Rosen (EPR) paradox. While there have been recent attempts to quantify steering, continuous variable systems remained elusive. We introduce a steering measure for two-mode continuous variable systems that is valid for arbitrary states. The measure is based on the violation of an optimized variance test for the EPR paradox, and admits a computable and experimentally friendly lower bound only depending on the second moments of the state, which reduces to a recently proposed quantifier of steerability by Gaussian measurements. We further show that Gaussian states are extremal with respect to our measure, minimizing it among all continuous variable states with fixed second moments. As a byproduct of our analysis, we generalize and relate well-known EPR-steering criteria. Finally an operational interpretation is provided, as the proposed measure is shown to quantify the optimal guaranteed key rate in semi-device independent quantum key distribution.

Ioannis Kogias; Gerardo Adesso

2014-11-03T23:59:59.000Z

276

Continuous Fiber Ceramic Composites  

SciTech Connect (OSTI)

Fiber-reinforced ceramic composites demonstrate the high-temperature stability of ceramics--with an increased fracture toughness resulting from the fiber reinforcement of the composite. The material optimization performed under the continuous fiber ceramic composites (CFCC) included a series of systematic optimizations. The overall goals were to define the processing window, to increase the robustinous of the process, to increase process yield while reducing costs, and to define the complexity of parts that could be fabricated.

None

2002-09-01T23:59:59.000Z

277

Ohio incinerator battle continues  

SciTech Connect (OSTI)

Waste Technologies Industries (WTI; East Liverpool, Ohio) is trying to wing what it hopes will be its final battle in a 13-year, $160 million war with the government, and community and environmental groups. The company since 1980 has sought EPA approval to operate a hazardous waste incinerator in East Liverpool, Ohio. WTI late last year conducted a pre-test burn, or shakedown, during which the incinerator burned certain types of hazardous waste. The test demonstrates the incinerator's performance under normal operating conditions, Regulatory authorities, including EPA and the Ohio Environmental Protection Agency (OEPA), monitored activity during the shakedown, which was limited to 720 hours of operation. In accordance with RCRA requirements, the company in March conducted a trial burn to demonstrate that the incinerator meets permit standards. WTI's permit specifies three performance parameters the incinerator must meet -- particulate and hydrogen chloride emissions limits, and destruction removal efficiencies (DREs).

Melody, M.

1993-05-01T23:59:59.000Z

278

EIS-0157-SA-01: Supplement Analysis  

Broader source: Energy.gov [DOE]

Continued Operation of Lawrence Livermore National Laboratory and Sandia National Laboratories, Livermore, Oakland Operations Office, Oakland, California

279

Three-dimensional Numerical Analysis on Blade Response of Vertical Axis Tidal Current Turbine Under Operational Condition  

SciTech Connect (OSTI)

Tidal power as a large-scale renewable source of energy has been receiving significant attention recently because of its advantages over the wind and other renewal energy sources. The technology used to harvest energy from tidal current is called a tidal current turbine. Though some of the principles of wind turbine design are applicable to tidal current turbines, the design of latter ones need additional considerations like cavitation damage, corrosion etc. for the long-term reliability of such turbines. Depending up on the orientation of axis, tidal current turbines can be classified as vertical axis turbines or horizontal axis turbines. Existing studies on the vertical axis tidal current turbine focus more on the hydrodynamic aspects of the turbine rather than the structural aspects. This paper summarizes our recent efforts to study the integrated hydrodynamic and structural aspects of the vertical axis tidal current turbines. After reviewing existing methods in modeling tidal current turbines, we developed a hybrid approach that combines discrete vortex method -finite element method that can simulate the integrated hydrodynamic and structural response of a vertical axis turbine. This hybrid method was initially employed to analyze a typical three-blade vertical axis turbine. The power coefficient was used to evaluate the hydrodynamic performance, and critical deflection was considered to evaluate the structural reliability. A sensitivity analysis was also conducted with various turbine height-to-radius ratios. The results indicate that both the power output and failure probability increase with the turbine height, suggesting a necessity for optimal design. An attempt to optimize a 3-blade vertical axis turbine design with hybrid method yielded a ratio of turbine height to radius (H/R) about 3.0 for reliable maximum power output.

Li, Ye; Karri, Naveen K.; Wang, Qi

2014-04-30T23:59:59.000Z

280

Business Continuity Planning Checklist  

E-Print Network [OSTI]

of your business, making sure you can recover the technology and processes required to operate after/Security, Physical Plant, Insurance, Legal Affairs, Public Affairs, Personnel Department, Comptroller, Audit Division the event. ­ Conduct a technology asset inventory to determine and document the mission-critical technology

Greenberg, Albert

Note: This page contains sample records for the topic "analysis continued operation" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Continuous Commissioning of a Central Chilled Water & Hot Water System  

E-Print Network [OSTI]

the campus loops and the building loops. Some optimization of the plant chiller 1 boiler operation is also necessary and beneficial. In general, through Continuous Commissioning, chilled water and hot water loop temperature differences will be improved...

Deng, S.; Turner, W. D.; Batten, T.; Liu, M.

2000-01-01T23:59:59.000Z

282

Business continuity planning for a U.S. supply chain  

E-Print Network [OSTI]

The research objective was to provide a directional sense of some key considerations for business continuity planning (BCP) specific to a company's downstream distribution operations in the U.S. This was achieved via a ...

Chee, Arthur K. L. (Arthur Kuan Loong)

2014-01-01T23:59:59.000Z

283

Exploration of parameters for the continuous blending of pharmaceutical powders  

E-Print Network [OSTI]

The transition from traditional batch blending to continuous blending is an opportunity for the pharmaceutical industry to reduce costs and improve quality control. This operational shift necessitates a deeper understanding ...

Lin, Ben Chien Pang

2011-01-01T23:59:59.000Z

284

Embedding Continuous Commissioning in an Energy Efficiency Retrofit Program  

E-Print Network [OSTI]

his paper presents a case study where Continuous Commissioning (CC), a process that optimizes the HVAC system operation and controls to reduce the building energy consumption and improve comfort, was embedded as one Energy Cost Reduction Measure...

Martinez, J. T.; Claridge, D.; Baltazar-Cervantes, J. C.; Turner, W. D.; Wei, G.; Verdict, M.

2006-01-01T23:59:59.000Z

285

Personal continuous air monitor  

DOE Patents [OSTI]

A personal continuous air monitor capable of giving immediate warning of the presence of radioactivity has a filter/detector head to be worn in the breathing zone of a user, containing a filter mounted adjacent to radiation detectors, and a preamplifier. The filter/detector head is connected to a belt pack to be worn at the waist or on the back of a user. The belt pack contains a signal processor, batteries, a multichannel analyzer, a logic circuit, and an alarm. An air pump also is provided in the belt pack for pulling air through the filter/detector head by way of an air tube.

Morgan, Ronald G. (Los Alamos, NM); Salazar, Samuel A. (Albuquerque, NM)

2000-01-01T23:59:59.000Z

286

Nuclear testing continues  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the ContributionsArms Control R&DNuclear fuel recycling in 4 minutestesting continues

287

Continuous Commissioning Measures  

E-Print Network [OSTI]

/2 0 12 Te m p e ra tu re ( °F ) SCHWR SCHWS CH1 Leaving Temp Air Separator Chiller - 1 Chiller - 2 Chiller - 3 PCHP-1 PCHP-2 PCHP-3 SCHP-1 SCHP-2 Bypass CHWR CHWS ESL-KT-14-11-38 CATEE 2014: Clean Air Through Efficiency Conference, Dallas, Texas...Workshop on the Continuous Commissioning® Process Joseph T. Martinez, PCC Carlos Yagua, PE Hiroko Masuda, Juan-Carlos Baltazar, PhD, PE Ahmet Ugursal, PhD Clean Air Through Energy Efficiency (CATEE) Conference, Dallas, Texas. November 18, 2014...

Yugua, C.

2014-01-01T23:59:59.000Z

288

UNIVERSITY OF TORONTO SCHOOL OF CONTINUING STUDIES  

E-Print Network [OSTI]

UNIVERSITY OF TORONTO SCHOOL OF CONTINUING STUDIES Learn more. 2013 2014 CALENDAR #12;Contents 3 Professional Development Programs 44 Courses 44 Accounting & Finance 48 Auditing 50 Business Analysis 52 Science 114 Building Science 116 Business Information Technology Management 117 Cloud Computing 118 Energy

Sokolowski, Marla

289

Spatial Analysis of Contaminants in 200 West Area Groundwater in Support of the 200-ZP-1 Operable Unit Pre-Conceptual Remedy Design  

SciTech Connect (OSTI)

This report documents a preliminary spatial and geostatistical analysis of the distribution of several contaminants of interest (COIs) in groundwater within the unconfined aquifer beneath the 200 West Area of the Hanford Site. The contaminant plumes of interest extend within the 200-ZP-1 and 200-UP-1 groundwater operable units. The COIs included in the PNNL study were carbon tetrachloride (CTET), technetium-99 (Tc-99), iodine-129 (I-129), chloroform, plutonium, uranium, trichloroethylene (TCE), and nitrate. The project included three tasks. Task 1 involved the development of a database that includes all relevant depth-discrete data on the distribution of COIs in the study area. The second task involved a spatial analysis of the three-dimensional (3D) distribution of data for the COIs in the study area. The main focus of the task was to determine if sufficient data are available for geostatistical mapping of the COIs in 3D. Task 3 involved the generation of numerical grids of the concentration of CTET, chloroform, and Tc-99.

Murray, Christopher J.; Bott, Yi-Ju

2008-12-30T23:59:59.000Z

290

Continuous pressure letdown system  

DOE Patents [OSTI]

A continuous pressure letdown system connected to a hopper decreases a pressure of a 2-phase (gas and solid) dusty gas stream flowing through the system. The system includes a discharge line for receiving the dusty gas from the hopper, a valve, a cascade nozzle assembly positioned downstream of the discharge line, a purge ring, an inert gas supply connected to the purge ring, an inert gas throttle, and a filter. The valve connects the hopper to the discharge line and controls introduction of the dusty gas stream into the discharge line. The purge ring is connected between the discharge line and the cascade nozzle assembly. The inert gas throttle controls a flow rate of an inert gas into the cascade nozzle assembly. The filter is connected downstream of the cascade nozzle assembly.

Sprouse, Kenneth M.; Matthews, David R.; Langowski, Terry

2010-06-08T23:59:59.000Z

291

Continuous cryopump with a device for regenerating the cryosurface  

DOE Patents [OSTI]

A high throughput continuous cryopump is provided. The cryopump (10) incorporates an improved method for regenerating the cryopumping surface (22) while the pump is in continuous operation. The regeneration of the cryopumping surface (22) does not thermally cycle the pump, and to this end a small chamber (91) connected to a secondary pumping source (60) serves to contain and exhaust frost removed from the cryopumping surface (22) during such regeneration. The frost is exhausted at a rate substantially independent of the speed of the cryopump which enhances the capability of the pump to achieve a high compression ratio and allow the pump to operate continuously while the cryopumping surface is being regenerated.

Foster, Christopher A. (Rte. 5, Box 101-B, Clinton, TN 37716)

1988-01-01T23:59:59.000Z

292

Continuous cryopump with a device for regenerating the cryosurface  

DOE Patents [OSTI]

A high throughput continuous cryopump is provided. The cryopump incorporates an improved method for regenerating the cryopumping surface while the pump is in continuous operation. The regeneration of the cryopumping surface does not thermally cycle the pump, and to this end a small chamber connected to a secondary pumping source serves to contain and exhaust frost removed from the cryopumping surface during such regeneration. The frost is exhausted at a rate substantially independent of the speed of the cryopump which enhances the capability of the pump to achieve a high compression ratio and allow the pump to operate continuously while the cryopumping surface is being regenerated. 8 figs.

Foster, C.A.

1988-02-16T23:59:59.000Z

293

Internship continued on page 6 Congestion continued on page 7  

E-Print Network [OSTI]

Internship continued on page 6 Congestion continued on page 7 BICYCLE COMMUTING page 2 CROSS September 2013 Catalystcts.umn.edu Internship program continues its success in second year Participants in the 2013 Summer Transportation Internship Program gained valuable experience in the transportation industry

Minnesota, University of

294

OPERATIONS (OPS)  

Broader source: Energy.gov (indexed) [DOE]

OPS) OBJECTIVE OPS.1 The formality and discipline of operations is adequate to conduct work safely and programs are in place to maintain this formality and discipline. (CR 13)...

295

Design operators  

E-Print Network [OSTI]

Design operators is a thesis that investigates the nature and characteristics of the design process by examining the interaction of computation with architectural design. The effects of the introduction of these media in ...

Dritsas, Stylianos, 1978-

2004-01-01T23:59:59.000Z

296

Operating Costs  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

This chapter is focused on capital costs for conventional construction and environmental restoration and waste management projects and examines operating cost estimates to verify that all elements of the project have been considered and properly estimated.

1997-03-28T23:59:59.000Z

297

Reasoning with Continuations III: A Complete Calculus of Control  

E-Print Network [OSTI]

of the â??­calculus for reasoning about languages with powerful control operators, the â?? v ­C­calculus and the first DRAFT 1 1 The Expressive Power of CPS The continuation­passing style (CPS) transformation constitutes functional abstractions. We consider two aspects of the expressive power of CPS: the control operators

Sabry, Amr

298

A Novel, Web-Driven Continuous Mining Steven J. Schafrik  

E-Print Network [OSTI]

A Novel, Web-Driven Continuous Mining Simulator By Steven J. Schafrik and Michael Karmis Department geometry of operations as well as other constraints. This paper presents WebConSim, a newly developed, Web underground and open-pit mining operations. OBJECTIVES AND DESIGN OF THE NEW WEB- BASED SIMULATOR One

299

Project Analysis Standard Operating Procedure  

Office of Environmental Management (EM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of Energy Power.pdf11-161-LNG |September 15,2015 | Department ofThatGrid3 Program Update: 4thDecemberand

300

Continuous production of conducting polymer  

E-Print Network [OSTI]

A device to continuously produce polypyrrole was designed, manufactured, and tested. Polypyrrole is a conducting polymer which has potential artificial muscle applications. The objective of continuous production was to ...

Gaige, Terry A. (Terry Alden), 1981-

2004-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "analysis continued operation" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Evaluation of potential severe accidents during low power and shutdown operations at Surry, Unit 1: Analysis of core damage frequency from internal events during mid-loop operations, Appendices A--D. Volume 2, Part 2  

SciTech Connect (OSTI)

During 1989, the Nuclear Regulatory Commission (NRC) initiated an extensive program to carefully examine the Potential risks during low Power and shutdown operations. The program includes two parallel projects being performed by Brookhaven National Laboratory (BNL) and Sandia National Laboratories (SNL). Two plants, Surry (pressurized water reactor) and Grand Gulf (boiling water reactor), were selected as the Plants to be studied. The objectives of the program are to assess the risks of severe accidents initiated during plant operational states other than full power operation and to compare the estimated core damage frequencies, important accident sequences and other qualitative and quantitative results with those accidents initiated during full power operation as assessed in NUREG-1150. The objective of this report is to document the approach utilized in the Surry plant and discuss the results obtained. A parallel report for the Grand Gulf plant is prepared by SNL. This study shows that the core-damage frequency during mid-loop operation at the Surry plant is comparable to that of power operation. We recognize that there is very large uncertainty in the human error probabilities in this study. This study identified that only a few procedures are available for mitigating accidents that may occur during shutdown. Procedures written specifically for shutdown accidents would be useful. This document, Volume 2, Pt. 2 provides appendices A through D of this report.

Chu, T.L.; Musicki, Z.; Kohut, P. [Brookhaven National Lab., Upton, NY (United States)] [and others

1994-06-01T23:59:59.000Z

302

ANNUAL REPORT 2012 CONTINUING EDUCATION  

E-Print Network [OSTI]

-13 tuition rates IMAGINING POSSIBILITIES CONNECTING COMMUNITIES2012 SAw TwO BIG UPdATES fOr CONTINUING EdUCATIONANNUAL REPORT 2012 CONTINUING EDUCATION AT THE UNIVERSITY OF UTAH #12;As one of the top knowledge the U) becomes. For well over 100 years, Continuing Education at the University of Utah has been opening

303

Design of hot extrusion molding device for the continuous production of pharmaceutical tablets  

E-Print Network [OSTI]

Currently, pharmaceutical tablets are manufactured in large batch operations that have inefficiencies associated with the stopping, re-configuration and testing between batches. Continuous manufacturing has the potential ...

Zampierollo, Giorgio (Giorgio Romano)

2010-01-01T23:59:59.000Z

304

EVALUATION OF SPRING OPERATED RELIEF VALVE MAINTENANCE INTERVALS AND EXTENSION OF MAINTENANCE TIMES USING A WEIBULL ANALYSIS WITH MODIFIED BAYESIAN UPDATING  

SciTech Connect (OSTI)

The Savannah River Site (SRS) spring operated pressure relief valve (SORV) maintenance intervals were evaluated using an approach provided by the American Petroleum Institute (API RP 581) for risk-based inspection technology (RBI). In addition, the impact of extending the inspection schedule was evaluated using Monte Carlo Simulation (MCS). The API RP 581 approach is characterized as a Weibull analysis with modified Bayesian updating provided by SRS SORV proof testing experience. Initial Weibull parameter estimates were updated as per SRS's historical proof test records contained in the Center for Chemical Process Safety (CCPS) Process Equipment Reliability Database (PERD). The API RP 581 methodology was used to estimate the SORV's probability of failing on demand (PFD), and the annual expected risk. The API RP 581 methodology indicates that the current SRS maintenance plan is conservative. Cost savings may be attained in certain mild service applications that present low PFD and overall risk. Current practices are reviewed and recommendations are made for extending inspection intervals. The paper gives an illustration of the inspection costs versus the associated risks by using API RP 581 Risk Based Inspection (RBI) Technology. A cost effective maintenance frequency balancing both financial risk and inspection cost is demonstrated.

Harris, S.; Gross, R.; Mitchell, E.

2011-01-18T23:59:59.000Z

305

Institute of Nuclear Power Operations 1994 annual report  

SciTech Connect (OSTI)

This annual report highlights the activities of the Institute of Nuclear Power Operations. The topics of the report include the president and chairmen`s joint message, overview of programs serving as the foundation for most of its activities, performance indicators for the US nuclear utility industry, and INPO`s 1994 financial reports and rosters. INPO has four technical cornerstone programs that serve as the foundation for most of its activities. (1) Evaluations of nuclear power plants operated by member utilities are conducted on a regularly scheduled basis. (2) INPO supports its member utilities in their work to achieve and maintain accreditation of training programs. (3) Events analysis programs identify and communicate lessons learned from plant events so utilities can take action to prevent similar events at their plants. (4) INPO helps members improve in nuclear operations areas through assistance programs and other activities that continually evolve to meet the changing needs of the nuclear industry

NONE

1994-12-31T23:59:59.000Z

306

Integration of Continuous Commissioning as a Measure in LoanSTAR and Energy Services Contracts  

E-Print Network [OSTI]

Continuous Commissioning (CC) is a process that resolves operating problems, optimizes the HVAC system operation and controls to reduce building energy consumption and improve comfort based on current building conditions and requirements...

Wei, G.; Zhou, J.; Turner, D.

307

Integration of Continuous Commissioning as a Measure in LoanSTAR and Energy Services Contracts  

E-Print Network [OSTI]

Continuous Commissioning® (CC®) is a process that resolves operating problems, optimizes the HVAC system operation and controls to reduce building energy consumption and improve comfort based on current building conditions and requirements...

Wei, G.; Zhou, J.; Turner, D.; Lilley, D.

308

The continuity of the output entropy of positive maps  

SciTech Connect (OSTI)

Global and local continuity conditions for the output von Neumann entropy for positive maps between Banach spaces of trace-class operators in separable Hilbert spaces are obtained. Special attention is paid to completely positive maps: infinite dimensional quantum channels and operations. It is shown that as a result of some specific properties of the von Neumann entropy (as a function on the set of density operators) several results on the output entropy of positive maps can be obtained, which cannot be derived from the general properties of entropy type functions. In particular, it is proved that global continuity of the output entropy of a positive map follows from its finiteness. A characterization of positive linear maps preserving continuity of the entropy (in the following sense: continuity of the entropy on an arbitrary subset of input operators implies continuity of the output entropy on this subset) is obtained. A connection between the local continuity properties of two completely positive complementary maps is considered. Bibliography: 21 titles.

Shirokov, Maxim E [Steklov Mathematical Institute, Russian Academy of Sciences, Moscow (Russian Federation)

2011-10-31T23:59:59.000Z

309

Distribution of Wind Power Forecasting Errors from Operational Systems (Presentation)  

SciTech Connect (OSTI)

This presentation offers new data and statistical analysis of wind power forecasting errors in operational systems.

Hodge, B. M.; Ela, E.; Milligan, M.

2011-10-01T23:59:59.000Z

310

Emergency Operating Records Protection Program  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

To establish the policy, responsibilities, and requirements for a Departmental Emergency Operating Records Protection Program to safeguard that core or records deemed necessary to assure continuity of essential Governmental activities during and following disaster and attack-related emergency conditions. Cancels DOE 5500.7A. Chanceled by DOE O 151.1 of 9-25-1995.

1991-10-23T23:59:59.000Z

311

NREL is a national laboratory of the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, operated by the Alliance for Sustainable Energy, LLC. NREL Planning & Analysis  

E-Print Network [OSTI]

increase in electricity prices #12;Innovation for Our Energy FutureNational Renewable Energy LaboratoryNREL is a national laboratory of the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, operated by the Alliance for Sustainable Energy, LLC. NREL Planning & Analysis NREL

312

VOLUME 81, NUMBER 25 P H Y S I C A L R E V I E W L E T T E R S 21 DECEMBER 1998 Receiver-Operating-Characteristic Analysis Reveals Superiority of Scale-Dependent Wavelet  

E-Print Network [OSTI]

effect of eliminating nonstationarities [13,14]. It is therefore ideal for examining both scale-Operating-Characteristic Analysis Reveals Superiority of Scale-Dependent Wavelet and Spectral Measures for Assessing Cardiac or revealing the presence of heart failure. Scale-dependent HRV measures were found to be substantially

Teich, Malvin C.

313

Intelligent Potroom Operation  

SciTech Connect (OSTI)

The Intelligent Potroom Operation project focuses on maximizing the performance of an aluminum smelter by innovating components for an intelligent manufacturing system. The Intelligent Potroom Advisor (IPA) monitors process data to identify reduction cells exhibiting behaviors that require immediate attention. It then advises operational personnel on those heuristic-based actions to bring the cell back to an optimal operating state in order to reduce the duration and frequency of substandard reduction cell performance referred to as ''Off-Peak Modes'' (OPMs). Techniques developed to identify cells exhibiting OPMs include the use of a finite element model-based cell state estimator for defining the cell's current operating state via advanced cell noise analyses. In addition, rule induction was also employed to identify statistically significant complex behaviors that occur prior to OPMs. The intelligent manufacturing system design, concepts and formalisms developed in this project w ere used as a basis for an intelligent manufacturing system design. Future research will incorporate an adaptive component to automate continuous process improvement, a technology platform with the potential to improve process performance in many of the other Industries of the Future applications as well.

Jan Berkow; Larry Banta

2003-07-29T23:59:59.000Z

314

Continuous Change Institutional Change Principle  

Broader source: Energy.gov [DOE]

Because it takes time to establish institutional change, Federal agencies need multiyear plans that continuously work to achieve, reinforce, and improve significant and persistent sustainability...

315

Continuous Forcing Data, Darwin, Australia  

DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

Long term, large scale continuous forcing data set for three complete wet seasons (2004-2005, 2005-2006 and 2006-2007) in Darwin, Australia.

Jakob, Christian

316

Microscale controlled continuous cell culture  

E-Print Network [OSTI]

Measurements of metabolic and cellular activity through substrate and product interactions are highly dependent on environmental conditions and cellular metabolic state. For such experiments to be feasible, continuous ...

Lee, Kevin Shao-Kwan

2011-01-01T23:59:59.000Z

317

Mercury Continuous Emmission Monitor Calibration  

SciTech Connect (OSTI)

Mercury continuous emissions monitoring systems (CEMs) are being implemented in over 800 coal-fired power plant stacks throughput the U.S. Western Research Institute (WRI) is working closely with the Electric Power Research Institute (EPRI), the National Institute of Standards and Technology (NIST), and the Environmental Protection Agency (EPA) to facilitate the development of the experimental criteria for a NIST traceability protocol for dynamic elemental mercury vapor calibrators/generators. These devices are used to calibrate mercury CEMs at power plant sites. The Clean Air Mercury Rule (CAMR) which was published in the Federal Register on May 18, 2005 and vacated by a Federal appeals court in early 2008 required that calibration be performed with NIST-traceable standards. Despite the vacature, mercury emissions regulations in the future will require NIST traceable calibration standards, and EPA does not want to interrupt the effort towards developing NIST traceability protocols. The traceability procedures will be defined by EPA. An initial draft traceability protocol was issued by EPA in May 2007 for comment. In August 2007, EPA issued a conceptual interim traceability protocol for elemental mercury calibrators. The protocol is based on the actual analysis of the output of each calibration unit at several concentration levels ranging initially from about 2-40 {micro}g/m{sup 3} elemental mercury, and in the future down to 0.2 {micro}g/m{sup 3}, and this analysis will be directly traceable to analyses by NIST. The EPA traceability protocol document is divided into two separate sections. The first deals with the qualification of calibrator models by the vendors for use in mercury CEM calibration. The second describes the procedure that the vendors must use to certify the calibrators that meet the qualification specifications. The NIST traceable certification is performance based, traceable to analysis using isotope dilution inductively coupled plasma/mass spectrometry (ID/ICP/MS) performed by NIST in Gaithersburg, MD. The outputs of mercury calibrators are compared to one another using a nesting procedure which allows direct comparison of one calibrator with another at specific concentrations and eliminates analyzer variability effects. The qualification portion of the EPA interim traceability protocol requires the vendors to define calibrator performance as affected by variables such as pressure, temperature, line voltage, and shipping. In 2007 WRI developed and conducted a series of simplified qualification experiments to determine actual calibrator performance related to the variables defined in the qualification portion of the interim protocol.

John Schabron; Eric Kalberer; Ryan Boysen; William Schuster; Joseph Rovani

2009-03-12T23:59:59.000Z

318

Operation Poorman  

SciTech Connect (OSTI)

The objectives of Operation Poorman were to design and build a portable seismic system and to set up and use this system in a cold-weather environment. The equipment design uses current technology to achieve a low-power, lightweight system that is configured into three modules. The system was deployed in Alaska during wintertime, and the results provide a basis for specifying a mission-ready seismic verification system.

Pruvost, N.; Tsitouras, J.

1981-03-18T23:59:59.000Z

319

Operations Videos  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas Conchas recoveryLaboratorySpeeding access1 TechnicalOilOnlineandOperations

320

Continuing engineering education for software engineering professionals  

SciTech Connect (OSTI)

Designers of software for safety-critical applications are impelled to supplement their education through continuing engineering studies in the areas of requirements analysis, hazard identification, risk analysis, fault tolerance, failure modes, and psychology. Today's complex level of design is contributing to opportunities for catastrophic design errors in computer functions where failure of such functions is capable of causing injury and death. A syllabus of post-graduate, core studies within the curricula of five engineering specialties is suggested. Software Engineers are exhorted to undertake a professional, responsible role in safety-critical software design.

Davis, P.I.

1992-02-19T23:59:59.000Z

Note: This page contains sample records for the topic "analysis continued operation" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Continuing engineering education for software engineering professionals  

SciTech Connect (OSTI)

Designers of software for safety-critical applications are impelled to supplement their education through continuing engineering studies in the areas of requirements analysis, hazard identification, risk analysis, fault tolerance, failure modes, and psychology. Today`s complex level of design is contributing to opportunities for catastrophic design errors in computer functions where failure of such functions is capable of causing injury and death. A syllabus of post-graduate, core studies within the curricula of five engineering specialties is suggested. Software Engineers are exhorted to undertake a professional, responsible role in safety-critical software design.

Davis, P.I.

1992-02-19T23:59:59.000Z

322

Continuous air monitor filter changeout apparatus  

DOE Patents [OSTI]

An apparatus and corresponding method for automatically changing out a filter cartridge in a continuous air monitor. The apparatus includes: a first container sized to hold filter cartridge replacements; a second container sized to hold used filter cartridges; a transport insert connectively attached to the first and second containers; a shuttle block, sized to hold the filter cartridges that is located within the transport insert; a transport driver mechanism means used to supply a motive force to move the shuttle block within the transport insert; and, a control means for operating the transport driver mechanism.

Rodgers, John C. (Santa Fe, NM)

2008-07-15T23:59:59.000Z

323

EXPERIMENTAL VERIFICATION OF DYNAMIC OPERATION OF  

E-Print Network [OSTI]

- ponent mixtures can be separated into a number of product fractions, whereas in continuous distillationEXPERIMENTAL VERIFICATION OF DYNAMIC OPERATION OF CONTINUOUS AND MULTIVESSEL BATCH DISTILLATION to the paper "Evaluation of Dynamic Models of Distillation Columns with Emphasis on the Initial Response

Skogestad, Sigurd

324

Applications of a fast, continuous wavelet transform  

SciTech Connect (OSTI)

A fast, continuous, wavelet transform, based on Shannon`s sampling theorem in frequency space, has been developed for use with continuous mother wavelets and sampled data sets. The method differs from the usual discrete-wavelet approach and the continuous-wavelet transform in that, here, the wavelet is sampled in the frequency domain. Since Shannon`s sampling theorem lets us view the Fourier transform of the data set as a continuous function in frequency space, the continuous nature of the functions is kept up to the point of sampling the scale-translation lattice, so the scale-translation grid used to represent the wavelet transform is independent of the time- domain sampling of the signal under analysis. Computational cost and nonorthogonality aside, the inherent flexibility and shift invariance of the frequency-space wavelets has advantages. The method has been applied to forensic audio reconstruction speaker recognition/identification, and the detection of micromotions of heavy vehicles associated with ballistocardiac impulses originating from occupants` heart beats. Audio reconstruction is aided by selection of desired regions in the 2-D representation of the magnitude of the transformed signal. The inverse transform is applied to ridges and selected regions to reconstruct areas of interest, unencumbered by noise interference lying outside these regions. To separate micromotions imparted to a mass-spring system (e.g., a vehicle) by an occupants beating heart from gross mechanical motions due to wind and traffic vibrations, a continuous frequency-space wavelet, modeled on the frequency content of a canonical ballistocardiogram, was used to analyze time series taken from geophone measurements of vehicle micromotions. By using a family of mother wavelets, such as a set of Gaussian derivatives of various orders, features such as the glottal closing rate and word and phrase segmentation may be extracted from voice data.

Dress, W.B.

1997-02-01T23:59:59.000Z

325

Operations Information  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 - September 2006 The 2002 WholesaleEnergy'sRunning jobsOPERATING PLANOperations

326

Continuous profiling of magnetotelluric fields  

SciTech Connect (OSTI)

The magnetotelluric (MT) method of mapping ground electrical conductivity is traditionally based on measurement of the surface impedance at widely spaced stations to infer models of the subsurface through a suitable pseudo 1-D inverse or with linearized least-squares inversion for 2- or 3-D geoelectric media. It is well known that small near-surface inhomogeneities can produce spatial discontinuities in the measured electric fields over a wide frequency range and may consequently bias the impedance on a very local scale. Inadequate station spacing effectively aliases the electric field measurements and results in distortions that cannot be removed in subsequent processing or modelling. In order to fully exploit the benefits of magnetotellurics in complex geological environments, closely spaced measurements must be used routinely. This thesis entertains an analysis of MT data taken along continuous profiles and is a first step that will allow more encompassing 2-D sampling techniques to become viable in the years to come. The developments presented here are to a large extent motivated by the physical insight gained from low-contrast solutions to the forward MT problem. These solutions describe the relationship between a perturbation in the electrical conductivity of the subsurface and the ensuing perturbation of the MT response as the output of a linear system. Albeit strictly accurate in a limited subset of practical exploration problems, the linearized solutions allow one to pursue a model independent study of the response characteristics of MT data. In fact, these solutions yield simple expressions for 1-,2-, and 3-D resistivity models which are here examined in progressive sequence.

Verdin, C.T.

1991-05-01T23:59:59.000Z

327

Reactor operation safety information document  

SciTech Connect (OSTI)

The report contains a reactor facility description which includes K, P, and L reactor sites, structures, operating systems, engineered safety systems, support systems, and process and effluent monitoring systems; an accident analysis section which includes cooling system anomalies, radioactive materials releases, and anticipated transients without scram; a summary of onsite doses from design basis accidents; severe accident analysis (reactor core disruption); a description of operating contractor organization and emergency planning; and a summary of reactor safety evolution. (MB)

Not Available

1990-01-01T23:59:59.000Z

328

The higher spin Laplace operator  

E-Print Network [OSTI]

This paper deals with a certain class of second-order conformally invariant operators acting on functions taking values in particular (finite-dimensional) irreducible representations of the orthogonal group. These operators can be seen as a generalisation of the Laplace operator to higher spin as well as a second order analogue of the Rarita-Schwinger operator. To construct these operators, we will use the framework of Clifford analysis, a multivariate function theory in which arbitrary irreducible representations for the orthogonal group can be realised in terms of polynomials satisfying a system of differential equations. As a consequence, the functions on which this particular class of operators act are functions taking values in the space of harmonics homogeneous of degree k. We prove the ellipticity of these operators and use this to investigate their kernel, focusing on both polynomial solutions and the fundamental solution.

Hendrik De Bie; David Eelbode; Matthias Roels

2015-01-24T23:59:59.000Z

329

Operations Task Management (OTM)  

SciTech Connect (OSTI)

This paper reviews the steps taken by management at Ashland Oil to reduce expenses, including an analysis of every aspect of the refinery. It was determined that the areas most adaptable to improvement were the maintenance department, storerooms, the laboratory and energy utilization. The authors focus, however, on the difficulties met in implementing an effective cost control program in the operations area, detailing the reasons why and examining the system ultimately installed in this area.

Miller, C.B.; Duck, C.H.

1985-10-01T23:59:59.000Z

330

Unsteady-state material balance model for a continuous rotary dissolver  

SciTech Connect (OSTI)

The unsteady-state continuous rotary dissolver material balance code (USSCRD) is a useful tool with which to study the performance of the rotary dissolver under a wide variety of operating conditions. The code does stepwise continuous material balance calculations around each dissolver stage and the digester tanks. Output from the code consists of plots and tabular information on the stagewise concentration profiles of UO{sub 2}, PuO{sub 2}, fission products, Pu(NO{sub 3}){sub 4}, UO{sub 2}(NO{sub 3}){sub 2}, fission product nitrates, HNO{sub 3}, H{sub 2}O, stainless steel, total particulate, and total fuel in pins. Other information about material transfers, stagewise liquid volume, material inventory, and dissolution performance is also provided. This report describes the development of the code, its limitations, key operating parameters, usage procedures, and the results of the analysis of several sets of operating conditions. Of primary importance in this work was the estimation of the steady-state heavy metal inventory in a 0.5-t/d dissolver drum. Values ranging from {similar_to}12 to >150 kg of U + Pu were obtained for a variety of operating conditions. Realistically, inventories are expected to be near the lower end of this range. Study of the variation of operating parameters showed significant effects on dissolver product composition from intermittent solids feed. Other observations indicated that the cycle times for the digesters and shear feed should be closely coupled in order to avoid potential problems with off-specification product. 19 references, 14 tables.

Lewis, B.E.

1984-09-01T23:59:59.000Z

331

Supplemental analysis of accident sequences and source terms for waste treatment and storage operations and related facilities for the US Department of Energy waste management programmatic environmental impact statement  

SciTech Connect (OSTI)

This report presents supplemental information for the document Analysis of Accident Sequences and Source Terms at Waste Treatment, Storage, and Disposal Facilities for Waste Generated by US Department of Energy Waste Management Operations. Additional technical support information is supplied concerning treatment of transuranic waste by incineration and considering the Alternative Organic Treatment option for low-level mixed waste. The latest respirable airborne release fraction values published by the US Department of Energy for use in accident analysis have been used and are included as Appendix D, where respirable airborne release fraction is defined as the fraction of material exposed to accident stresses that could become airborne as a result of the accident. A set of dominant waste treatment processes and accident scenarios was selected for a screening-process analysis. A subset of results (release source terms) from this analysis is presented.

Folga, S.; Mueller, C.; Nabelssi, B.; Kohout, E.; Mishima, J.

1996-12-01T23:59:59.000Z

332

Continuous space-time transformations  

E-Print Network [OSTI]

We prove that every continuous map acting on the four-dimensional Minkowski space and preserving light cones in one direction only is either a Poincar\\'e similarity, that is, a product of a Lorentz transformation and a dilation, or it is of a very special degenerate form. In the presence of the continuity assumption the main tool in the proof is a basic result from the homotopy theory of spheres.

Clément de Seguins Pazzis; Peter Šemrl

2015-02-04T23:59:59.000Z

333

Schrödinger operators on armchair nanotubes. II  

E-Print Network [OSTI]

We consider the Schr\\"odinger operator with a periodic potential on quasi-1D models of armchair single-wall nanotubes. The spectrum of this operator consists of an absolutely continuous part (intervals separated by gaps) plus an infinite number of eigenvalues with infinite multiplicity. We describe the absolutely continuous spectrum of the Schr\\"odinger operator: 1) the multiplicity, 2) endpoints of the gaps, they are given by periodic or antiperiodic eigenvalues or resonances (branch points of the Lyapunov function), 3) resonance gaps, where the Lyapunov function is non-real. We determine the asymptotics of the gaps at high energy.

Andrey Badanin; Jochen Brüning; Evgeny Korotyaev

2007-07-26T23:59:59.000Z

334

Survey your options: Continuous emissions monitoring  

SciTech Connect (OSTI)

In the US the public`s growing concern for air quality over the last twenty-five years has led to a complex patchwork of federal, state and local regulations aimed at controlling the emissions of pollutants from manufacturing facilities, power plants and municipal waste-incineration facilities. Like a shadow on the heels of a sprinter, the continuous emissions monitoring (CEM) industry has developed as a direct result of these regulations. In just two and a half decades, the CEM market has grown from a few specialized instrument firms to a billion-dollar business today--a remarkable feat considering there were few true CEM systems in existence prior to the enactment of the original US Clean Air Act of 1970. Despite the emergence of so many vendors offering so many different monitoring techniques, operators still face a host of complex issues when trying to select the right CEM. For facilities operating in today`s competitive, highly regulated environment, cost and performance pressures are stronger than ever. These pressures have forced CEM developers toward innovation to improve performance while containing capital and plant operating costs. This article provides an overview of the current status of CEM systems, and provides a glimpse at some of the new developments that will affect future monitoring configurations. Noteworthy new techniques include continuous emissions monitoring using Fourier Transform Infrared (FTIR) analyzers, laser-based opacity monitors, and the growing use of software-based, predictive CEMs. Also discussed is a new approach that overcomes the problems associated with measuring SO{sub 2} in fluegas streams downstream of NOx-reduction systems that use ammonia or urea injection.

White, J.R. [KVB/Analect, Irvine, CA (United States)

1995-07-01T23:59:59.000Z

335

Office of Enterprise Assessments Operational Awareness Record...  

Energy Savers [EERE]

HA sessions of select LMP HA events to clarify the hazards of the glass-water reaction, maintenance operations, and potential criticality. The HAT discussed updated analysis to...

336

Evaluation audit report. Romanian petroleum refinery, Petrotel, Ploiesti. A selective refinery analysis for operation, energy use, environmental impacts, and improvement opportunities, May 1992. Export trade information  

SciTech Connect (OSTI)

The objective of the report is to present opportunities for energy improvement and reduction of emissions for the Petrotel Refinery in Brazi near Ploiesti, Romania. Other defined and specified goals of the study include a consideration of refinery operating flexibility, an evaluation of fuel switching opportunities, including the use of coal as a substitute for energy supply, and an observation of the plants general condition and of its maintenance practice for its effect on operations. A further objective is to characterize the modifications for achieving expected benefits in accordance with the magnitude of effort and capital requirements anticipated.

Not Available

1992-05-01T23:59:59.000Z

337

Evaluation audit report. Romanian petroleum refinery, Petrobrazi, Ploiesti. A selective refinery analysis for operation, energy use, environmental impacts, and improvement opportunities, May 1992. Export trade information  

SciTech Connect (OSTI)

The objective of the report is to present opportunities for energy improvement and reduction of emissions for the Petrobrazi refinery which is located 12 kilometers southwest of Ploiesti, Romania. Other defined and specified goals of the study include a consideration of the refinery's operating flexibility; an evaluation of fuel switching including the use of coal as a substitute for energy supply; and an observation of the refinery's general condition and its maintenance practice for its effect on operations. A further objective is to characterize the modifications for achieving expected benefits in accordance with the magnitude of effort and the capital requirements anticipated.

Jurish, R.A.

1992-05-01T23:59:59.000Z

338

Experimental Investigation of Microbially Induced Corrosion of Test Samples and Effect of Self-Assembled Hydrophobic Monolayers. Exposure of Test Samples to Continuous Microbial Cultures, Chemical Analysis, and Biochemical Studies  

SciTech Connect (OSTI)

The study of biocorrosion of aluminum and beryllium samples were performed under conditions of continuous fermentation of thermophilic anaerobic microorganisms of different groups. This allowed us to examine the effect of various types of metabolic reactions of reduction-oxidation proceeding at different pH and temperatures under highly reduced conditions on aluminum and beryllium corrosion and effect of self-assembled hydrophobic monolayers.

Laurinavichius, K.S.

1998-09-30T23:59:59.000Z

339

Continuing Development of Models Based on Spherical Geodesic Grids  

E-Print Network [OSTI]

Continuing Development of Models Based on Spherical Geodesic Grids Ross Heikes, Joon-Hee Jung, C to finite-difference operators 3) Some numerical results from an aqua-planet simulation #12;Part1: Geodesic -- array based The geodesic grid can be mapped to a set of square arrays. 1 3 4 5 6 7 8 9 10 11 12 13 14 15

Collett Jr., Jeffrey L.

340

Post-doc: Modelling & Control of Continuous Reactors  

E-Print Network [OSTI]

development in mechatronics and microsystems, sustainable industrial processes, transportation systems scope is a demonstration of continuous reactors with in-line analytics for fine chemical production for improvement of operation and actuation and will provide data for sensor development and control guidelines. 4

Langendoen, Koen

Note: This page contains sample records for the topic "analysis continued operation" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Office of Headquarters Security Operations  

Broader source: Energy.gov [DOE]

The Office of Headquarters Security Operations strengthens national security by protecting personnel, facilities, property, classified information, and sensitive unclassified information for DOE Headquarters facilities in the National Capital Area under normal and abnormal (i.e., emergency) conditions; managing access authorization functions for Headquarters; ensuring that executives and dignitaries are fully protected, and supporting efforts to ensure the continuity of government in all circumstances as mandated by Presidential Decision Directive.

342

Continuous Reliability Enhancement for Wind (CREW) database : wind plant reliability benchmark.  

SciTech Connect (OSTI)

To benchmark the current U.S. wind turbine fleet reliability performance and identify the major contributors to component-level failures and other downtime events, the Department of Energy funded the development of the Continuous Reliability Enhancement for Wind (CREW) database by Sandia National Laboratories. This report is the third annual Wind Plant Reliability Benchmark, to publically report on CREW findings for the wind industry. The CREW database uses both high resolution Supervisory Control and Data Acquisition (SCADA) data from operating plants and Strategic Power Systems' ORAPWind%C2%AE (Operational Reliability Analysis Program for Wind) data, which consist of downtime and reserve event records and daily summaries of various time categories for each turbine. Together, these data are used as inputs into CREW's reliability modeling. The results presented here include: the primary CREW Benchmark statistics (operational availability, utilization, capacity factor, mean time between events, and mean downtime); time accounting from an availability perspective; time accounting in terms of the combination of wind speed and generation levels; power curve analysis; and top system and component contributors to unavailability.

Hines, Valerie Ann-Peters; Ogilvie, Alistair B.; Bond, Cody R.

2013-09-01T23:59:59.000Z

343

Continuous lengths of oxide superconductors  

DOE Patents [OSTI]

A layered oxide superconductor prepared by depositing a superconductor precursor powder on a continuous length of a first substrate ribbon. A continuous length of a second substrate ribbon is overlaid on the first substrate ribbon. Sufficient pressure is applied to form a bound layered superconductor precursor powder between the first substrate ribbon and the second substrate ribbon. The layered superconductor precursor is then heat treated to establish the oxide superconducting phase. The layered oxide superconductor has a smooth interface between the substrate and the oxide superconductor.

Kroeger, Donald M. (Knoxville, TN); List, III, Frederick A. (Andersonville, TN)

2000-01-01T23:59:59.000Z

344

Continuous production of polymethylpentene membranes  

DOE Patents [OSTI]

Gas separation membranes may be prepared in a continuous manner by passing a porous support which may, if so desired, be backed by a fabric through a solution of polymethylpentene dissolved in an organic solvent such as hexane. The support member is passed through the solution while one side thereof is in contact with a roller, thereby permitting only one side of the support member to be coated with the polymer. After continuously withdrawing the support member from the bath, the solvent is allowed to evaporate and the resulting membrane is recovered.

Epperson, Bonnie J. (San Diego, CA); Burnett, Lowell J. (San Diego, CA); Helm, Verne D. (Plains, MT)

1983-11-15T23:59:59.000Z

345

Linking Continuous Energy Management and Open Automated Demand Response  

E-Print Network [OSTI]

Linking Continuous Energy Management and Open AutomatedKeywords: Continuous Energy Management, Automated Demandlinking continuous energy management and continuous

Piette, Mary Ann

2009-01-01T23:59:59.000Z

346

Prognostic Analysis of the Tactical Quiet Generator  

SciTech Connect (OSTI)

The U.S. Army needs prognostic analysis of mission-critical equipment to enable condition-based maintenance before failure. ORNL has developed and patented prognostic technology that quantifies condition change from noisy, multi-channel, time-serial data. This report describes an initial application of ORNL's prognostic technology to the Army's Tactical Quiet Generator (TQG), which is designed to operate continuously at 10 kW. Less-than-full power operation causes unburned fuel to accumulate on internal components, thereby degrading operation and eventually leading to failure. The first objective of this work was identification of easily-acquired, process-indicative data. Two types of appropriate data were identified, namely output-electrical current and voltage, plus tri-axial acceleration (vibration). The second objective of this work was data quality analysis to avoid the garbage-in-garbage-out syndrome. Quality analysis identified more than 10% of the current data as having consecutive values that are constant, or that saturate at an extreme value. Consequently, the electrical data were not analyzed further. The third objective was condition-change analysis to indicate operational stress under non-ideal operation and machine degradation in proportion to the operational stress. Application of ORNL's novel phase-space dissimilarity measures to the vibration power quantified the rising operational stress in direct proportion to the less-than-full-load power. We conclude that ORNL's technology is an excellent candidate to meet the U.S. Army's need for equipment prognostication.

Hively, Lee M [ORNL

2008-09-01T23:59:59.000Z

347

Continuous-wave organic dye lasers and methods  

DOE Patents [OSTI]

An organic dye laser produces a continuous-wave (cw) output without any moving parts (e.g., without using flowing dye streams or spinning discs of solid-state dye media to prevent photobleaching) and with a pump beam that is stationary with respect to the organic dye medium. The laser's resonant cavity, organic dye medium, and pump beam are configured to excite a lasing transition over a time scale longer than the associated decay lifetimes in the organic dye medium without photobleaching the organic dye medium. Because the organic dye medium does not photobleach when operating in this manner, it may be pumped continuously so as to emit a cw output beam. In some examples, operation in this manner lowers the lasing threshold (e.g., to only a few Watts per square centimeter), thereby facilitating electrical pumping for cw operation.

Shapira, Ofer; Chua, Song-Liang; Zhen, Bo; Lee, Jeongwon; Soljacic, Marin

2014-09-16T23:59:59.000Z

348

K Basin Hazard Analysis  

SciTech Connect (OSTI)

The K East (KE)/K West (KW) Basins in the 100 K Area of the Hanford Site have been used for storage of irradiated N Reactor and single-pass reactor fuel. Remaining spent fuel is continuing to be stored underwater in racks and canisters in the basins while fuel retrieval activities proceed to remove the fuel from the basins. The Spent Nuclear Fuel (SNF) Project is adding equipment to the facility in preparation for removing the fuel and sludge from the basins In preparing this hazard analysis, a variety of hazard analysis techniques were used by the K Basins hazard analysis team, including hazard and operability studies, preliminary hazard analyses, and ''what if'' analyses (WHC-SD-SNF-PHA-001, HNF-2032, HNF-2456, and HNF-SD-SNF-SAD-002). This document summarizes the hazard analyses performed as part of the safety evaluations for the various modification projects and combines them with the original hazard analyses to create a living hazard analysis document. As additional operational activities and modifications are developed, this document will be updated as needed to ensure it covers all the hazards at the K Basins in a summary form and to ensure the subsequent safety analysis is bounding. This hazard analysis also identifies the preliminary set of design features and controls that the facility could rely on to prevent or reduce the frequency or mitigate consequences of identified accident conditions based on their importance and significance to safety. The operational controls and institutional programs relied on for prevention or mitigation of an uncontrolled release are identified as potential technical safety requirements. All operational activities and energy sources at the K Basins are evaluated in this hazard analysis. Using a systematic approach, this document identifies hazards created by abnormal operating conditions and external events (e.g., earthquakes) that have the potential for causing undesirable consequences to the facility worker, the onsite individual, or the public. This report describes the methodology used in conducting the K Basins Hazard Analysis, which provides the foundation for the K Basins Final Safety Analysis Report. This hazard analysis was performed in accordance with guidance provided by DOE-STD-3009-94, Preparation Guide for U.S. Department of Energy Nonreactor Nuclear Facility Safety Analysis Reports and complies with the requirements of 10 CFR 830.

SEMMENS, L.S.

2001-04-20T23:59:59.000Z

349

Main Riff (continue pattern) E-|-----------------------------------------------------------|  

E-Print Network [OSTI]

Main Riff (continue pattern) E-|-----------------------------------------------------------| B-|-----------------------------------------------------------| A-|-2--2----2--4--5----5--5--4--2--2--------------------------| E-|-----------------------------------------------------------| CHORUS (guitar chords are weak/intermittent): E A E A I can't get no satisfaction I can't get

Reiners, Peter W.

350

CONTROVERSIES in Continuous Glucose Monitoring  

E-Print Network [OSTI]

Science and Technology Volume 2, Issue 3, May 2008 © Diabetes Technology Society Abstract Continuous Sci Technol 2008;2(3):490-494 CGM: An Enabling Technology In Need of a Killer App In the jargon may not sell. On the other hand, the application is useless without the sophisticated device to run it

351

Concluding evaluation of a continuous haulage guidance sensor. Report of investigations, 1998  

SciTech Connect (OSTI)

The mining industry has the highest average annual fatality rate among major US industries. To address this, the National Institute for Occupational Safety and Health, Pittsburgh Research Laboratory (PRL), is conducting major research programs to reduce the hazard exposure of miners. One of the recently concluded programs at PRL developed the enabling technology for remote-controlled mining. An application involves the manual process of extracting and hauling coal where operators, in the tight confines of a mine, can be struck or caught by mobile machinery. The approach to remedy this problem uses a guidance system on the continuous haulage equipment so that it follows the continuous mining machine that extracts coal. This, in essence, involves sensor-based docking of the machines. Sensors functioning in the hostile mine environment of dust, methane gas, and water play the key role. Computer analysis of the mining machine`s movements and empirical machine characterizations established operating requirements and spatial limitations to ensure proper loading of coal into the haulage equipment. These data served in the selection of a guidance sensor. Technologies such as scanning laser systems and ultrasonic sensors have frequently been used in other applications, but were found unacceptable. However, a near-infrared sensor employing active targets met the requirements.

Sammarco, J.J.

1998-10-01T23:59:59.000Z

352

Plant-life extension planning for an operating LMFBR  

SciTech Connect (OSTI)

The study concluded that continued EBR-II operation is certainly feasible for well beyond 10 more years, and that continued demonstration of the unique inherent safety and operability features of a pool-type liquid-metal-cooled reactor and the demonstration of a reasonable operating lifetime are very important and will provide invaluable information for the design and development of the next generation nuclear power plants.

King, R.W.

1985-01-01T23:59:59.000Z

353

An Attentional Theory of Continuity Editing   

E-Print Network [OSTI]

The intention of most film editing is to create the impression of continuous action (“continuity”) by presenting discontinuous visual information. The techniques used to achieve this, the continuity editing rules, are ...

Smith, Tim J

354

EIS-0225-SA-01: Supplement Analysis  

Broader source: Energy.gov [DOE]

Continued Operation of the Pantex Plant and Associated Storage of Nuclear Weapon Components - AL-R8 Sealed Insert Container

355

Methods for Automated and Continuous Commissioning of Building Systems  

SciTech Connect (OSTI)

Avoidance of poorly installed HVAC systems is best accomplished at the close of construction by having a building and its systems put ''through their paces'' with a well conducted commissioning process. This research project focused on developing key components to enable the development of tools that will automatically detect and correct equipment operating problems, thus providing continuous and automatic commissioning of the HVAC systems throughout the life of a facility. A study of pervasive operating problems reveled the following would most benefit from an automated and continuous commissioning process: (1) faulty economizer operation; (2) malfunctioning sensors; (3) malfunctioning valves and dampers, and (4) access to project design data. Methodologies for detecting system operation faults in these areas were developed and validated in ''bare-bones'' forms within standard software such as spreadsheets, databases, statistical or mathematical packages. Demonstrations included flow diagrams and simplified mock-up applications. Techniques to manage data were demonstrated by illustrating how test forms could be populated with original design information and the recommended sequence of operation for equipment systems. Proposed tools would use measured data, design data, and equipment operating parameters to diagnosis system problems. Steps for future research are suggested to help more toward practical application of automated commissioning and its high potential to improve equipment availability, increase occupant comfort, and extend the life of system equipment.

Larry Luskay; Michael Brambley; Srinivas Katipamula

2003-04-30T23:59:59.000Z

356

Rational analysis of mass, momentum, and heat transfer phenomena in liquid storage tanks under realistic operating conditions: 2. Application to a feasibility study  

SciTech Connect (OSTI)

This is the second part of a two-part paper that deals with modeling the thermal performances of storage tanks of liquid water coupled with solar-assisted heatpump systems. The computer code THESTA, described in detail in the first part, has been applied to compare configurations which differ from one another in the distribution and thickness of the insulating panels. These numerical experiments show very clearly the capability of the code in simulating realistic operating conditions. The validity of the present release is also discussed. The results obtained have been assumed to be a reliable theoretical support to the definition of the features of the storage device of a pilot plant.

Parrini, F.; Vitale, S. (ENEL-Italian National Electricity Board-CRTN, Milan (Italy)); Castellano, L. (MATEC S.r.l., Milan (Italy))

1992-08-01T23:59:59.000Z

357

Office of Enterprise Assessments Operational Awareness Record for the Waste Treatment and Immobilization Plant Low Activity Waste Facility Waste Handling Systems Hazard Analysis Activities Observations - December 2014  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion | Department ofT ib l L d F SSales LLC OrderEfficiencyOceanOctober XX,/2012noteOperational(EA)

358

Sandia National Laboratories: Third Annual Continuous Reliability...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

ClimateECEnergyThird Annual Continuous Reliability Enhancement for Wind (CREW) Database Report Now Available Third Annual Continuous Reliability Enhancement for Wind (CREW)...

359

REAL TIME SYSTEM OPERATIONS 2006-2007  

SciTech Connect (OSTI)

The Real Time System Operations (RTSO) 2006-2007 project focused on two parallel technical tasks: (1) Real-Time Applications of Phasors for Monitoring, Alarming and Control; and (2) Real-Time Voltage Security Assessment (RTVSA) Prototype Tool. The overall goal of the phasor applications project was to accelerate adoption and foster greater use of new, more accurate, time-synchronized phasor measurements by conducting research and prototyping applications on California ISO's phasor platform - Real-Time Dynamics Monitoring System (RTDMS) -- that provide previously unavailable information on the dynamic stability of the grid. Feasibility assessment studies were conducted on potential application of this technology for small-signal stability monitoring, validating/improving existing stability nomograms, conducting frequency response analysis, and obtaining real-time sensitivity information on key metrics to assess grid stress. Based on study findings, prototype applications for real-time visualization and alarming, small-signal stability monitoring, measurement based sensitivity analysis and frequency response assessment were developed, factory- and field-tested at the California ISO and at BPA. The goal of the RTVSA project was to provide California ISO with a prototype voltage security assessment tool that runs in real time within California ISO?s new reliability and congestion management system. CERTS conducted a technical assessment of appropriate algorithms, developed a prototype incorporating state-of-art algorithms (such as the continuation power flow, direct method, boundary orbiting method, and hyperplanes) into a framework most suitable for an operations environment. Based on study findings, a functional specification was prepared, which the California ISO has since used to procure a production-quality tool that is now a part of a suite of advanced computational tools that is used by California ISO for reliability and congestion management.

Eto, Joseph H.; Parashar, Manu; Lewis, Nancy Jo

2008-08-15T23:59:59.000Z

360

Hermitian Young operators  

SciTech Connect (OSTI)

Starting from conventional Young operators, we construct Hermitian operators which project orthogonally onto irreducible representations of the (special) unitary group.

Keppeler, Stefan, E-mail: stefan.keppeler@uni-tuebingen.de [Mathematisches Institut, Universität Tübingen, Auf der Morgenstelle 10, 72076 Tübingen (Germany)] [Mathematisches Institut, Universität Tübingen, Auf der Morgenstelle 10, 72076 Tübingen (Germany); Sjödahl, Malin, E-mail: malin.sjodahl@thep.lu.se [Department of Astronomy and Theoretical Physics, Lund University, Sölvegatan 14A, 223 62 Lund (Sweden)] [Department of Astronomy and Theoretical Physics, Lund University, Sölvegatan 14A, 223 62 Lund (Sweden)

2014-02-15T23:59:59.000Z

Note: This page contains sample records for the topic "analysis continued operation" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

SPECTRAL INCLUSION AND ANALYTIC CONTINUATION  

E-Print Network [OSTI]

A. Markushevich, Moscow, 1961) 113–131 (Russian). 5. P. Henrici, Applied and computational complex analysis, Vol. III (Wiley, 1993). 6. T. Ransford, Potential ...

A. ATZMON, A. EREMENKO and M. SODIN

362

Geological structures from downward continuation of gravity anomalies  

E-Print Network [OSTI]

operator and two grid spacings (2 and 4 km), the depth to the upper surface of the source is about 4 km, with the center of' mass located at about 8 km. Comparison of these results with those for a sphere yield a density contrast of 0. 3 g/cc . Both... km 18. Downward-continuation residual gravity map and profile at the depth of 6 km. Contours in mGals. Grid spacing 4 km by 4 km 19. Downward-continuation residual gravity map and profile at the depth of 8 km. Contours in mGals. Grid spacing 4 km...

Yao, Chia-Chi George

2012-06-07T23:59:59.000Z

363

NLO BFKL and Anomalous Dimensions of Light-Ray Operators  

SciTech Connect (OSTI)

The anomalous dimensions of light-ray operators of twist two are obtained by analytical continuation of the anomalous dimensions of corresponding local operators. I demonstrate that the asymptotics of these anomalous dimensions at the "BFKL point" j ? 1 can be obtained by comparing the light-cone operator expansion with the high-energy expansion in Wilson lines.

Balitsky, Ian [JLAB, Newport News, VA (United States)

2014-01-01T23:59:59.000Z

364

CONTINUATION S EFIIERENCE NO OF DOCUMENT BEING CONTINUED AEO  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-Series to someone6Energy, science,PrinciplesPlasma& RecordsCONTINUATION S

365

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-Series to someone6Energy, science,PrinciplesPlasma& RecordsCONTINUATION SNSN

366

Magnetic Schrödinger operators on armchair nanotubes  

E-Print Network [OSTI]

We consider the Schr\\"odinger operator with a periodic potential on a quasi 1D continuous periodic model of armchair nanotubes in $\\R^3$ in a uniform magnetic field (with amplitude $B\\in \\R$), which is parallel to the axis of the nanotube. The spectrum of this operator consists of an absolutely continuous part (spectral bands separated by gaps) plus an infinite number of eigenvalues with infinite multiplicity. We describe all eigenfunctions with the same eigenvalue including compactly supported. We describe the spectrum as a function of $B$. For some specific potentials we prove an existence of gaps independent on the magnetic field. If $B\

Evgeny Korotyaev; Andrey Badanin

2008-04-01T23:59:59.000Z

367

Operations research and systems analysis of geopressured-geothermal energy in Louisiana. Final report for the period June 1, 1978-August 31, 1979  

SciTech Connect (OSTI)

The primary purpose was to provide a projection of the probable future contribution of the geopressured-geothermal energy resource in Louisiana to the overall energy requirements of the nation. A number of associated objectives were emphasized: namely, development of the tools and methodology for performing economic analyses, application of these tools to specific prospects about which adequate resource assessments have been made, identification of the impediments to resource development, and socio-economic analysis of the impact of development of the resource on these specific prospects. An overview of the geopressured-geothermal resource activities in Louisiana is provided first, followed by a detailed discussion and review of the achievements of this project. Finally the major conclusions and findings of this project with respect to commercial viability, impediments, and social and economic impact are presented, and recommendations are made for future systems analysis work.

Johnson, A.E. Jr.

1980-11-01T23:59:59.000Z

368

Lessons and Measures Learned from Continuous Commissioning(SM) of Central Chilled/Hot Water Systems  

E-Print Network [OSTI]

water and hot water system operation. It can be performed before, during, or after building side continuous commissioning. Successful central chilled/hot water system CC not only results in improved production and distribution, but also achieves...

Deng, S.; Turner, W. D.; Claridge, D. E.; Bruner, H.; Chen, H.; Wei, G.

2001-01-01T23:59:59.000Z

369

Battelle Energy Alliance, LLC, Continuity Readiness Assurance Report — Fiscal Year 2014  

SciTech Connect (OSTI)

This is a report generated for DOE-ID to summarize accomplishments made by the BEA Continuity of Operations program as a part of BEA Emergency Management at the INL during the past fiscal year.

Brandon C. Stucki; Sherman S. Campbell

2014-09-01T23:59:59.000Z

370

An evaluation of the effectiveness of the US Department of Energy Integrated Safety Process (SS-21) for Nuclear Explosive Operations using quantitative hazard analysis  

SciTech Connect (OSTI)

This paper evaluates the effectiveness of the US Department of Energy Integrated Safety Process or ``Seamless Safety (SS-21)`` program for reducing risk associated with nuclear explosive operations. A key element in the Integrated Safety Process is the use of hazard assessment techniques to evaluate process design changes in parallel or concurrently with process design and development. This concurrent hazard assessment method recently was employed for the B61-0, 2 & 5 and W69 nuclear explosive dismantlement activities. This paper reviews the SS-21 hazard assessment process and summarizes the results of the concurrent hazard assessments performed for the B61 and W69 dismantlement programs. Comparisons of quantitative hazard assessment results before and after implementation of the SS-21 design process shed light on the effectiveness of the SS-21 program for achieving risk reduction.

Fischer, S.R.; Konkel, H.; Bott, T.; Eisenhawer, S.; Auflick, J.; Houghton, K.; Maloney, K.; DeYoung, L.; Wilson, M. [Los Alamos National Lab., NM (United States)]|[Sandia National Labs., Albuquerque, NM (United States)

1996-03-01T23:59:59.000Z

371

JOB DESCRIPTION Title: Continuous Improvement Specialist  

E-Print Network [OSTI]

or Six Sigma-based continuous improvement methods. Certification: Six Sigma Black Belt or Green Belt

Heller, Barbara

372

Enhancements in Continuous-Energy Monte Carlo Capabilities in SCALE  

SciTech Connect (OSTI)

Monte Carlo tools in SCALE are commonly used in criticality safety calculations as well as sensitivity and uncertainty analysis, depletion, and criticality alarm system analyses. Recent improvements in the continuous-energy data generated by the AMPX code system and significant advancements in the continuous-energy treatment in the KENO Monte Carlo eigenvalue codes facilitate the use of SCALE Monte Carlo codes to model geometrically complex systems with enhanced solution fidelity. The addition of continuous-energy treatment to the SCALE Monaco code, which can be used with automatic variance reduction in the hybrid MAVRIC sequence, provides significant enhancements, especially for criticality alarm system modeling. This paper describes some of the advancements in continuous-energy Monte Carlo codes within the SCALE code system.

Bekar, Kursat B [ORNL] [ORNL; Celik, Cihangir [ORNL] [ORNL; Wiarda, Dorothea [ORNL] [ORNL; Peplow, Douglas E. [ORNL] [ORNL; Rearden, Bradley T [ORNL] [ORNL; Dunn, Michael E [ORNL] [ORNL

2013-01-01T23:59:59.000Z

373

Diesel prices continue to decrease  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-Series to UserProduct: CrudeOfficeNERSC Helps DevelopDiesel prices continue to

374

Diesel prices continue to decrease  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-Series to UserProduct: CrudeOfficeNERSC Helps DevelopDiesel prices continue

375

Diesel prices continue to decrease  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-Series to UserProduct: CrudeOfficeNERSC Helps DevelopDiesel prices continueDiesel

376

Diesel prices continue to fall  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-Series to UserProduct: CrudeOfficeNERSC Helps DevelopDieselDiesel prices continue

377

Diesel prices continue to increase  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-Series to UserProduct: CrudeOfficeNERSC HelpsDiesel prices continue to increase

378

Diesel prices continue to increase  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-Series to UserProduct: CrudeOfficeNERSC HelpsDiesel prices continue to

379

Diesel prices continue to rise  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-Series to UserProduct: CrudeOfficeNERSC HelpsDiesel prices continue

380

Analysis of RHIC beam dump pre-fires  

SciTech Connect (OSTI)

It has been speculated that the beam may cause instability of the RHIC Beam Abort Kickers. In this study, we explore the available data of past beam operations, the device history of key modulator components, and the radiation patterns to examine the correlations. The RHIC beam abort kicker system was designed and built in the 90's. Over last decade, we have made many improvements to bring the RHIC beam abort kicker system to a stable operational state. However, the challenge continues. We present the analysis of the pre-fire, an unrequested discharge of kicker, issues which relates to the RHIC machine safety and operational stability.

Zhang, W.; Ahrens, L.; Fischer, W.; Hahn, H.; Mi, J.; Sandberg, J.; Tan, Y.

2011-03-28T23:59:59.000Z

Note: This page contains sample records for the topic "analysis continued operation" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Continuous austempering fluidized bed furnace. Final report  

SciTech Connect (OSTI)

The intended objective of this project was to show the benefits of using a fluidized bed furnace for austenitizing and austempering of steel castings in a continuous manner. The division of responsibilities was as follows: (1) design of the fluidized bed furnace--Kemp Development Corporation; (2) fabrication of the fluidized bed furnace--Quality Electric Steel, Inc.; (3) procedure for austempering of steel castings, analysis of the results after austempering--Texas A and M University (Texas Engineering Experiment Station). The Department of Energy provided funding to Texas A and M University and Kemp Development Corporation. The responsibility of Quality Electric Steel was to fabricate the fluidized bed, make test castings and perform austempering of the steel castings in the fluidized bed, at their own expense. The project goals had to be reviewed several times due to financial constraints and technical difficulties encountered during the course of the project. The modifications made and the associated events are listed in chronological order.

Srinivasan, M.N. [Lamar Univ., Beaumont, TX (United States). Dept. of Mechanical Engineering] [Lamar Univ., Beaumont, TX (United States). Dept. of Mechanical Engineering

1997-09-23T23:59:59.000Z

382

Use of continuous emission monitoring in the electric utility industry. Paper 81. 48. 3  

SciTech Connect (OSTI)

Steam electric generating plants are subject to continuous monitoring regulations. Reliable emission data are recorded to be reported to regulatory agencies. The continuous monitor is being used as a diagnostic tool for optimizing operation of control equipment also. Monitored data identify the magnitude, duration, and time of any emissions exceeding compliance standards so that corrective actions may be taken.

Van Gieson, J.

1981-01-01T23:59:59.000Z

383

Numerical Study of Steady Turbulent Flow through Bifurcated Nozzles in Continuous Casting  

E-Print Network [OSTI]

. The effects of nozzle design and casting process operating variables on the jet characteristics exitingNumerical Study of Steady Turbulent Flow through Bifurcated Nozzles in Continuous Casting FADY M. NAJJAR, BRIAN G. THOMAS, and DONALD E. HERSHEY Bifurcated nozzles are used in continuous casting

Thomas, Brian G.

384

Continuous Precipitation of Ceria Nanoparticles from a Continuous Flow Micromixer  

SciTech Connect (OSTI)

Cerium oxide nanoparticles were continuously precipitated from a solution of cerium(III) nitrate and ammonium hydroxide using a micro-scale T-mixer. Findings show that the method of mixing is important in the ceria precipitation process. In batch mixing and deposition, disintegration and agglomeration dominates the deposited film. In T-mixing and deposition, more uniform nanorod particles are attainable. In addition, it was found that the micromixing approach reduced the exposure of the Ce(OH)3 precipates to oxygen, yielding hydroxide precipates in place of CeO2 precipitates. Advantages of the micro-scale T-mixing approach include shorter mixing times, better control of nanoparticle shape and less agglomeration.

Tseng, Chih Heng; Paul, Brian; Chang, Chih-hung; Engelhard, Mark H.

2013-01-01T23:59:59.000Z

385

Drilling operations change gear  

SciTech Connect (OSTI)

Predicts that several technological developments (e.g. measurement-while-drilling tools, computer data-gathering systems, improved drill bits, muds, downhole mud motors, and more efficient rigs) will have a major effect on drilling operations in the not-too-distant future. While several companies manufacture MWD systems and most can boast of successful runs, the major problem with the MWD system is cost. Manufacturers continue to make advances in both turbine and positive displacement mud motors. As the life span of downhole mud motors improves, these motors can economically compete with a rotary rig in drilling certain straight-hole intervals. Prototype bit designs include the use of lasers, electronic beams, flames, sparks, explosives, rocket exhaust, chains, projectiles, abrasive jets, and high-pressure erosion. Because drilling fluids are taking a large share of the drilling budget, mud engineers are trying to optimize costs, while maintaining well bore stability and increasing penetration rates. Many companies are taking the strategy of designing the simplest mud program possible and increasing additives only as needed. Air and foam drilling techniques are gaining attention. Concludes that as crude oil prices increase and the rig count begins to rebound, attention will once again turn to drilling technology and methodology.

Moore, S.D.

1982-08-01T23:59:59.000Z

386

Measured Performance and Analysis of Ground Source Heat Pumps for Space Conditioning and for Water Heating in a Low-Energy Test House Operated under Simulated Occupancy Conditions  

SciTech Connect (OSTI)

In this paper we present measured performance and efficiency metrics of Ground Source Heat Pumps (GSHPs) for space conditioning and for water heating connected to a horizontal ground heat exchanger (GHX) loop. The units were installed in a 345m2 (3700ft2) high-efficiency test house built with structural insulated panels (SIPs), operated under simulated occupancy conditions, and located in Oak Ridge, Tennessee (USA) in US Climate Zone 4 . The paper describes distinctive features of the building envelope, ground loop, and equipment, and provides detailed monthly performance of the GSHP system. Space conditioning needs of the house were completely satisfied by a nominal 2-ton (7.0 kW) water-to-air GSHP (WA-GSHP) unit with almost no auxiliary heat usage. Recommendations for further improvement through engineering design changes are identified. The comprehensive set of data and analyses demonstrate the feasibility and practicality of GSHPs in residential applications and their potential to help achieve source energy and greenhouse gas emission reduction targets set under the IECC 2012 Standard.

Ally, Moonis Raza [ORNL] [ORNL; Munk, Jeffrey D [ORNL] [ORNL; Baxter, Van D [ORNL] [ORNL; Gehl, Anthony C [ORNL] [ORNL

2012-01-01T23:59:59.000Z

387

Hierarchical clustering using correlation metric and spatial continuity constraint  

DOE Patents [OSTI]

Large data sets are analyzed by hierarchical clustering using correlation as a similarity measure. This provides results that are superior to those obtained using a Euclidean distance similarity measure. A spatial continuity constraint may be applied in hierarchical clustering analysis of images.

Stork, Christopher L.; Brewer, Luke N.

2012-10-02T23:59:59.000Z

388

Case Study of Continuous Commissioning in an Office Building  

E-Print Network [OSTI]

ICEBO2006, Shenzhen, China Building Commissioning for Energy Efficiency and Comfort, Vol.VI-9-3 Case Study of Continuous Commissioning? in an Office Building Xiufeng Pang Bin Zheng Mingsheng Liu Graduate Student Graduate...&M University examined system operations in a number of newly retrofitted buildings and found that optimizing the system can double energy savings and improve building comfort [Liu et al.]. In 1996, the CC? process was first developed. While most...

Pang, X.; Zheng, B.; Liu, M.

2006-01-01T23:59:59.000Z

389

School Conditions Will Continue to Earn Failing Grades  

E-Print Network [OSTI]

School Conditions Will Continue to Earn Failing Grades Jeffrey K. Sonne Senior Research Engineer Robin K. Vieira Director, Buildings Research Division Florida Solar Energy Center Cocoa, Florida James B. Cummings Program Manager ABSTRACT... This study addresses indoor air quality and general conditions problems in schools throughout the United States. Tools employed to investigate conditions include a nationwide, web-based survey, characterization of actual operating conditions in schools...

Sonne, J. K.; Vieira, R. K.; Cummings, J. B.

2006-01-01T23:59:59.000Z

390

Continuous Commissioning® Leading Energy Project Process - An Industry Approach  

E-Print Network [OSTI]

State Energy Office ABSTRACT Continuous Commissioning (CC ® ) is an ongoing process to resolve operating problems, improve comfort, optimize energy use, and identify retrofits for existing commercial and institutional buildings and central plant..., P. E., is a Senior Engineer at an electric utility and has over 20 years of experience in building energy system design/consulting, energy measurement and verification. She is a registered Professional Engineer. A. Selzer is a program manager...

Liu, M.; Wang, J.; Hansen, K.; Seltzer, A.

2005-01-01T23:59:59.000Z

391

Multi-stage microbial system for continuous hydrogen production  

DOE Patents [OSTI]

A method of using sequential chemostat culture vessels to provide continuous H.sub.2 production, in which photosynthetic O.sub.2 evolution and H.sub.2 photoproduction are separated physically into two separate bioreactors, comprising: a) growing a microorganism culture able to continuously generate H.sub.2 by photosynthetically producing cells at about the early-to-late log state in a first photobioreactor operating as a sulfur chemostat under aerobic and/or conditions; b) continuously feeding cells from the first photobioreactor to a second photobioreactor operating under anaerobic conditions and sulfur deprivation conditions resulting from constant uptake of sulfate in the first bioreactor and a low rate of culture flow between the first and second bioreactors, for induction of hydrogenase and H.sub.2 photoproduction to allow for continuous cultivation of the microorganism's cells in the first photobioreactor and constant H.sub.2 production in the second photobioreactor, and c) H.sub.2 gas from the second photobioreactor.

Kosourov, Sergey; Ghirardi, Maria L.; Seibert, Michael

2010-06-08T23:59:59.000Z

392

Operating Permits (New Jersey)  

Broader source: Energy.gov [DOE]

The owner or operator of a facility subject to this article shall obtain and maintain an operating permit for the facility. The owner or operator of a facility subject to this article shall ensure...

393

Cogeneration Operational Issues  

E-Print Network [OSTI]

operations. Other operational issues also include utility transmission planning, generation planning and fuel mix decisions. All of these operational problems have an impact on the ratepayer in regard to quality of electric service and future rates. Both...

Williams, M.

394

Air Carrier Flight Operations  

E-Print Network [OSTI]

Most air carriers operate under a system of prioritized goals including safety, customer service (on-time departures and arrivals) and operating economics. The flight operations department is responsible for the safe and ...

Midkif, Alan H.

395

Continuous magnetic separator and process  

DOE Patents [OSTI]

A continuous magnetic separator and process for separating a slurry comprising magnetic particles into a clarified stream and a thickened stream. The separator has a container with a slurry inlet, an overflow outlet for the discharge of the clarified slurry stream, and an underflow outlet for the discharge of a thickened slurry stream. Magnetic particles in the slurry are attracted to, and slide down, magnetic rods within the container. The slurry is thus separated into magnetic concentrate and clarified slurry. Flow control means can be used to control the ratio of the rate of magnetic concentrate to the rate of clarified slurry. Feed control means can be used to control the rate of slurry feed to the slurry inlet.

Oder, Robin R. (Export, PA); Jamison, Russell E. (Lower Burrell, PA)

2008-04-22T23:59:59.000Z

396

Heat Transfer Operators Associated with Quantum Operations  

E-Print Network [OSTI]

Any quantum operation applied on a physical system is performed as a unitary transformation on a larger extended system. If the extension used is a heat bath in thermal equilibrium, the concomitant change in the state of the bath necessarily implies a heat exchange with it. The dependence of the average heat transferred to the bath on the initial state of the system can then be found from the expectation value of a hermitian operator, which is named as the heat transfer operator (HTO). The purpose of this article is the investigation of the relation between the HTOs and the associated quantum operations. Since, any given quantum operation on a system can be realized by different baths and unitaries, many different HTOs are possible for each quantum operation. On the other hand, there are also strong restrictions on the HTOs which arise from the unitarity of the transformations. The most important of these is the Landauer erasure principle. This article is concerned with the question of finding a complete set of restrictions on the HTOs that are associated with a given quantum operation. An answer to this question has been found only for a subset of quantum operations. For erasure operations, these characterizations are equivalent to the generalized Landauer erasure principle. For the case of generic quantum operations however, it appears that the HTOs obey further restrictions which cannot be obtained from the entropic restrictions of the generalized Landauer erasure principle.

Ç. Aksak; S. Turgut

2011-04-14T23:59:59.000Z

397

Finance, IT Operations & Information Security Dear Colleagues,  

E-Print Network [OSTI]

1 Finance, IT Operations & Information Security Dear Colleagues, It is hard not to be mindful with the guidance of their senior administrators. The re-organization in some of the finance offices continues the intranet site. #12;2 Harry Dumay, PhD MBA Chief Financial Officer/ Associate Dean for Finance

398

Department of Energy Oakland Operations Office  

E-Print Network [OSTI]

no change in ratings from FY 1999, three (Personal Property, Facilities Management, and Safeguards contract with the Board of Trustees for the Leland Stanford Jr., University forde management and operation to commend SLAC for your continued Outstanding performance in Science and Technology (S&T) Program (e.g. B

Wechsler, Risa H.

399

Building Operator Certification  

E-Print Network [OSTI]

Building Operator Certification Energy Efficiency through Operator Training CATEE December 18, 2013 – San Antonio, TX Dennis Lilley, CEM, PMP ESL-KT-13-12-49 CATEE 2013: Clean Air Through Energy Efficiency Conference, San Antonio, Texas Dec. 16...-18 Building Operator Certification Energy Efficiency through Operator Training What is Building Operator Certification? Industry-recognized credential in energy efficient building operation practices Created with 100 industry experts Launched in 1996 9...

Lilley, D.

2013-01-01T23:59:59.000Z

400

Operations Research Analyst  

Broader source: Energy.gov [DOE]

The incumbent in this position will serve as an Operations Research Analyst in the Generation Scheduling (PGS). The Operations Research Analyst is responsible for analytical work that involves...

Note: This page contains sample records for the topic "analysis continued operation" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Spectrum of the volume integral operator of electromagnetic scattering  

E-Print Network [OSTI]

Spectrum of the volume integral operator of the three-dimensional electromagnetic scattering is analyzed. The operator has both continuous essential spectrum, which dominates at lower frequencies, and discrete eigenvalues, which spread out at higher ones. The explicit expression of the operator's symbol provides exact outline of the essential spectrum for any inhomogeneous anisotropic scatterer with Holder continuous constitutive parameters. Geometrical bounds on the location of discrete eigenvalues are derived for various physical scenarios. Numerical experiments demonstrate good agreement between the predicted spectrum of the operator and the eigenvalues of its discretized version.

Neil V. Budko; Alexander B. Samokhin

2005-05-04T23:59:59.000Z

402

Analysis of accident sequences and source terms at treatment and storage facilities for waste generated by US Department of Energy waste management operations  

SciTech Connect (OSTI)

This report documents the methodology, computational framework, and results of facility accident analyses performed for the US Department of Energy (DOE) Waste Management Programmatic Environmental Impact Statement (WM PEIS). The accident sequences potentially important to human health risk are specified, their frequencies assessed, and the resultant radiological and chemical source terms evaluated. A personal-computer-based computational framework and database have been developed that provide these results as input to the WM PEIS for the calculation of human health risk impacts. The WM PEIS addresses management of five waste streams in the DOE complex: low-level waste (LLW), hazardous waste (HW), high-level waste (HLW), low-level mixed waste (LLMW), and transuranic waste (TRUW). Currently projected waste generation rates, storage inventories, and treatment process throughputs have been calculated for each of the waste streams. This report summarizes the accident analyses and aggregates the key results for each of the waste streams. Source terms are estimated, and results are presented for each of the major DOE sites and facilities by WM PEIS alternative for each waste stream. Key assumptions in the development of the source terms are identified. The appendices identify the potential atmospheric release of each toxic chemical or radionuclide for each accident scenario studied. They also discuss specific accident analysis data and guidance used or consulted in this report.

Mueller, C.; Nabelssi, B.; Roglans-Ribas, J.; Folga, S.; Policastro, A.; Freeman, W.; Jackson, R.; Mishima, J.; Turner, S.

1996-12-01T23:59:59.000Z

403

Continuous chain bit with downhole cycling capability  

DOE Patents [OSTI]

A continuous chain bit for hard rock drilling is capable of downhole cycling. A drill head assembly moves axially relative to a support body while the chain on the head assembly is held in position so that the bodily movement of the chain cycles the chain to present new composite links for drilling. A pair of spring fingers on opposite sides of the chain hold the chain against movement. The chain is held in tension by a spring-biased tensioning bar. A head at the working end of the chain supports the working links. The chain is centered by a reversing pawl and piston actuated by the pressure of the drilling mud. Detent pins lock the head assembly with respect to the support body and are also operated by the drilling mud pressure. A restricted nozzle with a divergent outlet sprays drilling mud into the cavity to remove debris. Indication of the centered position of the chain is provided by noting a low pressure reading indicating proper alignment of drilling mud slots on the links with the corresponding feed branches.

Ritter, Don F. (Albuquerque, NM); St. Clair, Jack A. (Albuquerque, NM); Togami, Henry K. (Albuquerque, NM)

1983-01-01T23:59:59.000Z

404

Continuous wave laser irradiation of explosives  

SciTech Connect (OSTI)

Quantitative measurements of the levels of continuous wave (CW) laser light that can be safely applied to bare explosives during contact operations were obtained at 532 nm, 785 nm, and 1550 nm wavelengths. A thermal camera was used to record the temperature of explosive pressed pellets and single crystals while they were irradiated using a measured laser power and laser spot size. A visible light image of the sample surface was obtained before and after the laser irradiation. Laser irradiation thresholds were obtained for the onset of any visible change to the explosive sample and for the onset of any visible chemical reaction. Deflagration to detonation transitions were not observed using any of these CW laser wavelengths on single crystals or pressed pellets in the unconfined geometry tested. Except for the photochemistry of DAAF, TATB and PBX 9502, all reactions appeared to be thermal using a 532 nm wavelength laser. For a 1550 nm wavelength laser, no photochemistry was evident, but the laser power thresholds for thermal damage in some of the materials were significantly lower than for the 532 nm laser wavelength. No reactions were observed in any of the studied explosives using the available 300 mW laser at 785 nm wavelength. Tables of laser irradiance damage and reaction thresholds are presented for pressed pellets of PBX9501, PBX9502, Composition B, HMX, TATB, RDX, DAAF, PETN, and TNT and single crystals of RDX, HMX, and PETN for each of the laser wavelengths.

McGrane, Shawn D.; Moore, David S.

2010-12-01T23:59:59.000Z

405

Using Whole-Building Electric Load Data in Continuous or Retro-Commissioning  

SciTech Connect (OSTI)

Whole-building electric load data can often reveal problems with building equipment or operations. In this paper, we present methods for analyzing 15-minute-interval electric load data. These methods allow building operators, energy managers, and commissioning agents to better understand a building's electricity consumption over time and to compare it to other buildings, helping them to 'ask the right questions' to discover opportunities for electricity waste elimination, energy efficiency, peak load management, and demand response. For example: Does the building use too much energy at night, or on hot days, or in the early evening? Knowing the answer to questions like these can help with retro-commissioning or continuous commissioning. The methods discussed here can also be used to assess how building energy performance varies with time. Comparing electric load before and after fixing equipment or changing operations can help verify that the fixes have the intended effect on energy consumption. Analysis methods discussed in this paper include: ways to graphically represent electric load data; the definition of various parameters that characterize facility electricity loads; and a regression-based electricity load model that accounts for both time of week and outdoor air temperature. The methods are illustrated by applying them to data from commercial buildings. We demonstrate the ability to recognize changes in building operation, and to quantify changes in energy performance. Some key findings are: 1) Plotting time series electric load data is useful for understanding electricity consumption patterns and changes to those patterns, but results may be misleading if data from different time intervals are not weather-normalized. 2) Parameter plots can highlight key features of electric load data and may be easier to interpret than plots of time series data themselves. 3) A time-of-week indicator variable (as compared to time-of-day and day-of-week indicator variables) improves the accuracy of regression models of electric load. 4) A piecewise linear and continuous outdoor air temperature dependence can be derived without the use of a change-point model (which would add complexity to the modeling algorithm) or assumptions about when structural changes occur (which could introduce inaccuracy). 5) A model that includes time-of-week and temperature dependence can be used for weather normalization and can determine whether the building is unusually temperature-sensitive, which can indicate problems with HVAC operation.

Price, Phillip N.; Mathieu, Johanna L.; Kiliccote, Sila; Piette, Mary Ann

2011-07-01T23:59:59.000Z

406

Distributed analysis in ATLAS  

E-Print Network [OSTI]

The ATLAS experiment accumulated more than 140 PB of data during the first run of the Large Hadron Collider (LHC) at CERN. The analysis of such an amount of data for the distributed physics community is a challenging task. The Distributed Analysis (DA) system of the ATLAS experiment is an established and stable component of the ATLAS distributed computing operations. About half a million user jobs are daily running on DA resources, submitted by more than 1500 ATLAS physicists. The reliability of the DA system during the first run of the LHC and the following shutdown period has been high thanks to the continuous automatic validation of the distributed analysis sites and the user support provided by a dedicated team of expert shifters. During the LHC shutdown, the ATLAS computing model has undergone several changes to improve the analysis workflows, including the re-design of the production system, a new analysis data format and event model, and the development of common reduction and analysis frameworks. We r...

Dewhurst, Alastair; The ATLAS collaboration

2015-01-01T23:59:59.000Z

407

Catalyst immobilization techniques for continuous flow synthesis  

E-Print Network [OSTI]

Catalytic processes are ubiquitous in both research and industrial settings. As continuous flow processes continue to gain traction in research labs and fine and pharmaceutical chemical processes, new opportunities exist ...

Nagy, Kevin David

2012-01-01T23:59:59.000Z

408

Plan for Operating in the Event of a Lapse in Appropriations  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

The order established plans and procedures for continuing operations during a lapse in appropriations. Cancels DOE O 137.1A

2011-09-30T23:59:59.000Z

409

CONTINUING AND PROFESSIONAL EDUCATION Business and  

E-Print Network [OSTI]

cover FREE CERTIFICATE PROGRAM INFO SESSIONS Find out how continuing education through UC Davis.................................................................................................. 12 ENERGY RESOURCE m

Ferrara, Katherine W.

410

Miniature electrically operated diaphragm valve  

DOE Patents [OSTI]

The present invention provides a miniature electrically operated valve that can stand off significant pressures, that can be inexpensively produced, and that can be made to operate without continuous electrical power. A valve according to the present invention comprises a housing and a beam mounted with the housing. A diaphragm mounted with the housing forms a sealed fluid volume. An electromagnetic energy source, such as an electromagnetic coil, mounts with the housing and when energized urges the beam in one direction. The beam can be urged in the opposing direction by passive means or by reversing the polarity of the electromagnetic energy source or by a second electromagnetic energy source. Two fluid ports mount with the housing. A first fluid port mounts so that, as the beam is urged in one direction or the opposite, the beam urges the diaphragm to move between engaging and substantially sealing the fluid port and disengaging and not substantially sealing the fluid port. A seat can be mounted with the diaphragm to aid in sealing the fluid port. Latching mechanisms such as permanent magnets can be mounted so that the valve remains in the open or closed positions without continuous electrical power input. Fluid can flow through the housing between the two fluid ports when the diaphragm does not seal the first fluid port, but can be prevented from flowing by urging the beam so that the diaphragm seals the first fluid port. Various embodiments accommodate various latching mechanisms, electromagnetic energy sources, number of fluid ports, and diaphragm design considerations.

Adkins, Douglas R. (Albuquerque, NM); Spletzer, Barry L. (Albuquerque, NM); Wong, Chungnin C. (Albuquerque, NM); Frye-Mason, Gregory C. (Cedar Crest, NM); Fischer, Gary J. (Albuquerque, NM); Hesketh, Peter J. (Atlanta, GA)

2001-01-01T23:59:59.000Z

411

NUCLEAR PLANT OPERATIONS AND  

E-Print Network [OSTI]

NUCLEAR PLANT OPERATIONS AND CONTROL KEYWORDS: neutron flux, cur- rent noise, vibration diagnostics: Swedish Nuclear Powe

Pázsit, Imre

412

Continuous cofinal maps on ultrafilters Natasha Dobrinen  

E-Print Network [OSTI]

An ultrafilter U on a countable base has continuous Tukey reductions if when- ever an ultrafilter V is Tukey continuous Tukey reductions is inherited under Tukey reducibility. In particular, if U is Tukey reducible to a p-point then U has continuous Tukey reductions. In the second part, we show that any count- able

Dobrinen, Natasha

413

Solving Nonlinear Equations by Adaptive Homotopy Continuation*  

E-Print Network [OSTI]

continuation. Section 3 takes up the sequential generation of continuation paths for the continuation the grid is determined step by step in accordance with two objectives: short path length, and avoidance centered at 1+ Oi. The actual path through the grid is determined within the algorithm on a step-by-step

Tesfatsion, Leigh

414

Operator pencil passing through a given operator  

SciTech Connect (OSTI)

Let ? be a linear differential operator acting on the space of densities of a given weight ?{sub 0} on a manifold M. One can consider a pencil of operators ?-circumflex(?)=(?{sub ?}) passing through the operator ? such that any ?{sub ?} is a linear differential operator acting on densities of weight ?. This pencil can be identified with a linear differential operator ?-circumflex acting on the algebra of densities of all weights. The existence of an invariant scalar product in the algebra of densities implies a natural decomposition of operators, i.e., pencils of self-adjoint and anti-self-adjoint operators. We study lifting maps that are on one hand equivariant with respect to divergenceless vector fields, and, on the other hand, with values in self-adjoint or anti-self-adjoint operators. In particular, we analyze the relation between these two concepts, and apply it to the study of diff?(M)-equivariant liftings. Finally, we briefly consider the case of liftings equivariant with respect to the algebra of projective transformations and describe all regular self-adjoint and anti-self-adjoint liftings. Our constructions can be considered as a generalisation of equivariant quantisation.

Biggs, A., E-mail: khudian@manchester.ac.uk, E-mail: adam.biggs@student.manchester.ac.uk; Khudaverdian, H. M., E-mail: khudian@manchester.ac.uk, E-mail: adam.biggs@student.manchester.ac.uk [School of Mathematics, University of Manchester, Oxford Road, Manchester M13 9PL (United Kingdom)

2013-12-15T23:59:59.000Z

415

Simulated Energy Savings Comparison Between Two Continuous Commissioning® Methods Applied to a Retrofitted Office Building  

E-Print Network [OSTI]

The 8 th International Conference for Enhanced Building Operations (ICEBO 2008) October 20-22, 2008, Berlin, Germany Simulated Energy Savings Comparison Between Two Continuous Commissioning ? Methods Applied to a Retrofitted Office Building... and the cold and hot 1 ESL-IC-08-10-30 Proceedings of the Eighth International Conference for Enhanced Building Operations, Berlin, Germany, October 20-22, 2008 The 8 th International Conference for Enhanced Building Operations (ICEBO 2008) October 20...

Texas A& M Campus Building CC® Team

416

Market characteristics of future oil tanker operations  

E-Print Network [OSTI]

This work analyzes the market characteristics of future oil tanker operations with a particular emphasis on those aspects which will have a potential impact on the design of future vessels. The market analysis model used ...

Willemann, Simmy Dhawan

2014-01-01T23:59:59.000Z

417

Facilities Operations, Planning, and Engineering Services  

E-Print Network [OSTI]

Facilities Operations, Planning, and Design Engineering Services Energy Management & Water and In- house Engineering Mechanical Electrical Engineering Data Analysis Construction Services In Conservation Capital Project-Bldg Systems Review Commissioning BSL3/DLAM Engineer Building Systems Engineering

McLaughlin, Richard M.

418

DEVELOPMENT, INSTALLATION AND OPERATION OF THE MPC&A OPERATIONS MONITORING (MOM) SYSTEM AT THE JOINT INSTITUTE FOR NUCLEAR RESEARCH (JINR) DUBNA, RUSSIA  

SciTech Connect (OSTI)

The Material Protection, Control and Accounting (MPC&A) Operations Monitoring (MOM) systems handling at the International Intergovernmental Organization - Joint Institute for Nuclear Research (JINR) is described in this paper. Category I nuclear material (plutonium and uranium) is used in JINR research reactors, facilities and for scientific and research activities. A monitoring system (MOM) was installed at JINR in April 2003. The system design was based on a vulnerability analysis, which took into account the specifics of the Institute. The design and installation of the MOM system was a collaborative effort between JINR, Brookhaven National Laboratory (BNL) and the U.S. Department of Energy (DOE). Financial support was provided by DOE through BNL. The installed MOM system provides facility management with additional assurance that operations involving nuclear material (NM) are correctly followed by the facility personnel. The MOM system also provides additional confidence that the MPC&A systems continue to perform effectively.

Kartashov,V.V.; Pratt,W.; Romanov, Y.A.; Samoilov, V.N.; Shestakov, B.A.; Duncan, C.; Brownell, L.; Carbonaro, J.; White, R.M.; Coffing, J.A.

2009-07-12T23:59:59.000Z

419

Efficiency Vermont's Enhanced Building Operations Programs  

E-Print Network [OSTI]

assistance, economic analysis, and financial incentives to help Vermont households and businesses reduce their energy costs 4 Efficiency Vermont?s Commercial & Industrial Programs New Construction Program ? Prescriptive - Rebates ? Core Performance... ? Custom Market Opportunity Program ? Prescriptive - Rebates ? Custom Retrofit Program ? Custom* * includes improving building operations programs More Information at www.efficiencyvermont.com 5 Efficiency Vermont?s Operational Improvement...

Laflamme, S.

2011-01-01T23:59:59.000Z

420

In-situ continuous water monitoring system  

DOE Patents [OSTI]

An in-situ continuous liquid monitoring system for continuously analyzing volatile components contained in a water source comprises: a carrier gas supply, an extraction container and a mass spectrometer. The carrier gas supply continuously supplies the carrier gas to the extraction container and is mixed with a water sample that is continuously drawn into the extraction container by the flow of carrier gas into the liquid directing device. The carrier gas continuously extracts the volatile components out of the water sample. The water sample is returned to the water source after the volatile components are extracted from it. The extracted volatile components and the carrier gas are delivered continuously to the mass spectrometer and the volatile components are continuously analyzed by the mass spectrometer. 2 figs.

Thompson, C.V.; Wise, M.B.

1998-03-31T23:59:59.000Z

Note: This page contains sample records for the topic "analysis continued operation" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

National Aeronautics and Space Administration Human Exploration & Operations  

E-Print Network [OSTI]

)/Ground Operations. · Continue strong momentum on Commercial activities. · Conduct remaining launches in LaunchNational Aeronautics and Space Administration Human Exploration & Operations Reorganization Status capabilities to conduct NASA's aeronautics and space activities. 6. Share NASA with the public, educators

Waliser, Duane E.

422

GA Tech Campus Emergency Response Team STANDARD OPERATING PROCEDURE  

E-Print Network [OSTI]

GA Tech Campus Emergency Response Team GT-CERT STANDARD OPERATING PROCEDURE 09/29/2010 #12;2 Table as a condition for the appointment and continuing maintenance of membership. GT-CERT members operate for and to respond to emergency/disaster situations. 2.0 Purpose To establish procedures for the activation

423

CONDUCT OF OPERATIONS (CO)  

Broader source: Energy.gov (indexed) [DOE]

CONDUCT OF OPERATIONS (CO) OBJECTIVE TA-55 SST Facility NNSA ORR Implementation Plan 1 1 CO.1 The formality and discipline of operations is adequate to conduct work safely and...

424

Reservoir Operation in Texas  

E-Print Network [OSTI]

management of the surface water resources of the various river basins of the state. The operation of these essential water control facilities is examined in this report. Reservoir operation is viewed here from the perspective of deciding how much water...

Wurbs, Ralph A.

425

Aerosol Sampler Operations Manual  

E-Print Network [OSTI]

-1123 Laboratory FAX (916) 752-4107 Standard Operating Procedures Technical Information Document TI 201A #12;TI 201.................................................................................................................................................. 3 1.0 Weekly Maintenance ProceduresIMPROVE Aerosol Sampler Operations Manual February 10, 1997 Air Quality Group Crocker Nuclear

Fischer, Emily V.

426

SWPF Crane Lift Operation  

SciTech Connect (OSTI)

A multiple vview shot of the SWPF crane lift operation at the Savannah River Site. Funded by the Recovery Act.

None

2010-01-01T23:59:59.000Z

427

Quantum Operations and Measurement  

E-Print Network [OSTI]

the Stinespring dilation form of E . 6 #12; II: operator­sum representation E(#) = Tr env # U(## # env )U

Seevinck, Michiel

428

Performance Indicators and Analysis of Operations Information  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

To identify, monitor, and analyze data that measures the Environment, Safety and Health (ES&H) performance of facilities, programs, and organizations. Cancels DOE 5480.26

1995-09-27T23:59:59.000Z

429

Performance Indicators and Analysis of Operations Information  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

To identify, monitor, and analyze data that measures the Environment, Safety and Health (ES&H) performance of facilities, programs, and organizations. Chg 2, 5-1-96.

1996-05-01T23:59:59.000Z

430

Performance Indicators and Analysis of Operations Information  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

To identify, monitor, and analyze data that measures the Environment, Safety and Health (ES&H) performance of facilities, programs, and organization. Cancels DOE 5480.26. Chg 1, 10-26-95.

1995-09-27T23:59:59.000Z

431

Hazard Analysis Reports for Nuclear Explosive Operations  

Broader source: Energy.gov (indexed) [DOE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarly Career Scientists'Montana.ProgramJulietip sheetK-4In 2013 many autoThisThe Hawaii

432

Operational analysis of the Port City Stockyards  

E-Print Network [OSTI]

of bwperst Port Citp StocdcPsrgst first fall weak cash montb, 195185000 ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ 000 ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ P~ of lkveshoeh ~ed bF tppes of bwPersc bP speoies, Perh Citp She~st first AU. weeh sash mentbt... ~ ~ ' ~ I 0 0 f ~ ~ ~ II ~ ~ 1 4 1 ~ ' f 0 e BsliverP aQey at nev trask cattle doehs+. ~ ~ . ~ i. . . . ~ . Inkivsring settle bp Ssyrsss elle@ flu new ~ settle doohs to co~0 ~ ~ I ~ 0 ~ 11 tl ~ 1 ~ ~ ~ ~ ~ 0 ~ ~ ~ ~ ~ ~ ~ ~ ~ VeighLng esXKI'at seals Coo...

Smith, Houston Edward

1957-01-01T23:59:59.000Z

433

BPAT Operational Analysis DSO216 Report  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

as 24, no matter when in the hour the action occurred.) 4709 4626 4543 4709 Installed Wind Capacity (as of the end of each month) Report Created On: 1052012 at 11:15 AM BPAT...

434

BPAT Operational Analysis DSO216 Report  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth (AOD)ProductssondeadjustsondeadjustAboutScience Program CumulusA tC:\Documents10.Benjamin0,Albert,John2 Act

435

Operations and maintenance philosophy  

SciTech Connect (OSTI)

This Operations and Maintenance (O&M) Philosophy document is intended to establish a future O&M vision, with an increased focus on minimizing worker exposure, ensuring uninterrupted retrieval operations, and minimizing operation life-cycle cost. It is intended that this document would incorporate O&M lessons learned into on-going and future project upgrades.

DUNCAN, G.P.

1999-10-28T23:59:59.000Z

436

DOE Continues Aggressive Energy Efficiency Enforcement Effort...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Aggressive Energy Efficiency Enforcement Effort with Nearly 30 New Proposed Penalties DOE Continues Aggressive Energy Efficiency Enforcement Effort with Nearly 30 New Proposed...

437

Stationary distributions of continuous time Markov chains  

E-Print Network [OSTI]

Apr 13, 2012 ... stationary distribution as the limiting fraction of time spent in states. 1 Stationary measures in continuous time. The following theorem is an ...

2012-04-13T23:59:59.000Z

438

Continuous Processing of High Thermal Conductivity Polyethylene...  

Broader source: Energy.gov (indexed) [DOE]

Processing of High Thermal Conductivity Polyethylene Fibers and Sheets Continuous Processing of High Thermal Conductivity Polyethylene Fibers and Sheets Massachusetts Institute of...

439

ONE-PARAMETER CONTINUOUS FIELDS OF KIRCHBERG ...  

E-Print Network [OSTI]

One-parameter separable unital continuous fields of Kirchberg algebras (nuclear purely infinite simple C*-algebras) with torsion free Ki-groups and trivial ...

2008-09-05T23:59:59.000Z

440

Theoretical Ecology: Continued growth and success  

E-Print Network [OSTI]

EDITORIAL Theoretical Ecology: Continued growth and successof areas in theoretical ecology. Among the highlights areyear represent theoretical ecology from around the world: 20

Hastings, Alan

2010-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "analysis continued operation" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

National Security Technology Incubator Operations Plan  

SciTech Connect (OSTI)

This report documents the operations plan for developing the National Security Technology Incubator (NSTI) program for southern New Mexico. The NSTI program will focus on serving businesses with national security technology applications by nurturing them through critical stages of early development. The NSTI program is being developed as part of the National Security Preparedness Project (NSPP), funded by Department of Energy (DOE)/National Nuclear Security Administration (NNSA). The operation plan includes detailed descriptions of the structure and organization, policies and procedures, scope, tactics, and logistics involved in sustainable functioning of the NSTI program. Additionally, the operations plan will provide detailed descriptions of continuous quality assurance measures based on recommended best practices in incubator development by the National Business Incubation Association (NBIA). Forms that assist in operations of NSTI have been drafted and can be found as an attachment to the document.

None

2008-04-30T23:59:59.000Z

442

Analysis of Signalling Pathways using Continuous Time Markov Chains  

E-Print Network [OSTI]

Calder,M. Vyshemirsky,V. Gilbert,D. Orton,R. Trans.on Computat. Syst. Biol. VI, volume 4220 pp 44-67 Springer Verlag

Calder, M.

443

Stability Analysis of Continuous-Time Macroeconometic Systems  

E-Print Network [OSTI]

+ 2 flog(Q #3; e y 4 + P #3; e y 11 ) #0; log(Q #3; + P #3; )#0; #12; 2 y 7 + (#12; 2 #0; #12; 3 )Dy 5 #0; y 1 g (2.15) D 2 y 2 = #0; 3 Dy 2 + 4 #26; 1 #12; 6 log " (Q #3; ) #0;#12; 6 #0; #12; 5 (K #3; ) #0;#12; 6 (Q #3; ) #0;#12; 6 e #0;#12; 6 y 4 #0...; #21; 2 ) + #12; 8 ] #27; (2.17) D 2 y 4 = #0; 7 Dy 4 + 8 #26; log " 1#0; #12; 9 (q #3; p #3; =p #3; i ) #12; 10 e #12; 10 (y 5 +y 14 ) 1#0; #12; 9 (q #3; p #3; =p #3; i ) #12; 10 # + log (C #3; e y 1 + g #3; (Q #3; e y 4 + P #3; e y 11 ) +K #3; e y 3...

Barnett, William A.; He, Yijun

1999-01-01T23:59:59.000Z

444

Visualization and continuous simulation of a space nuclear power system  

E-Print Network [OSTI]

2 Design of reactor system developed using graphical editor 17 3 Front end of Omega 4 Color Scale Editor . 19 21 5 Color Scale Editor with a more continuous scale 23 6 User Interface of Xcigs 25 7 Selection of particular component and cell... mathematical model is used to represent a physical or a hypothetical design of a space nuclear reactor. Thermal hydraulic analysis programs (such as CENTAR [5, 4], TRAC [2], and RELAP [6]) perform analysis on such models and produce simulation results...

Rawal, Rajiv

1992-01-01T23:59:59.000Z

445

A Single Continuous Function as a Model for Fast Rise Exponential Decay Gamma-Ray Bursts.  

E-Print Network [OSTI]

??A quantitative analysis was performed on a sample of Fast-Rise Exponential-Decay gamma-ray bursts using a continuous fitting function. The data were obtained from the Large… (more)

Logue, Daniel B

2006-01-01T23:59:59.000Z

446

First all-sky search for continuous gravitational waves from unknown sources in binary systems  

E-Print Network [OSTI]

We present the first results of an all-sky search for continuous gravitational waves from unknown spinning neutron stars in binary systems using LIGO and Virgo data. Using a specially developed analysis program, the TwoSpect ...

Aggarwal, Nancy

447

Method and apparatus for chemically altering fluids in continuous flow  

DOE Patents [OSTI]

The present invention relates to a continuous flow fluid reactor for chemically altering fluids. The reactor operates on standard frequency (50 to 60 Hz) electricity. The fluid reactor contains particles that are energized by the electricity to form a corona throughout the volume of the reactor and subsequently a non-equilibrium plasma that interacts with the fluid. Particles may form a fixed bed or a fluid bed. Electricity may be provided through electrodes or through an inductive coil. Fluids include gases containing exhaust products and organic fuels requiring oxidation.

Heath, William O. (Richland, WA); Virden, Jr., Judson W. (Richland, WA); Richardson, R. L. (West Richland, WA); Bergsman, Theresa M. (Richland, WA)

1993-01-01T23:59:59.000Z

448

Method and apparatus for chemically altering fluids in continuous flow  

DOE Patents [OSTI]

The present invention relates to a continuous flow fluid reactor for chemically altering fluids. The reactor operates on standard frequency (50 to 60 Hz) electricity. The fluid reactor contains particles that are energized by the electricity to form a corona throughout the volume of the reactor and subsequently a non-equilibrium plasma that interacts with the fluid. Particles may form a fixed bed or a fluid bed. Electricity may be provided through electrodes or through an inductive coil. Fluids include gases containing exhaust products and organic fuels requiring oxidation. 4 figures.

Heath, W.O.; Virden, J.W. Jr.; Richardson, R.L.; Bergsman, T.M.

1993-10-19T23:59:59.000Z

449

Schrödinger operators on armchair nanotubes. I  

E-Print Network [OSTI]

We consider the Schr\\"odinger operator with a periodic potential on quasi-1D models of armchair single-wall nanotubes. The spectrum of this operator consists of an absolutely continuous part (intervals separated by gaps) plus an infinite number of eigenvalues with infinite multiplicity. We describe all eigenfunctions with the same eigenvalue. We define a Lyapunov function, which is analytic on some Riemann surface. On each sheet, the Lyapunov function has the same properties as in the scalar case, but it has branch points, which we call resonances. In example we show the existence of real and complex resonances for some specific potentials.

Andrey Badanin; Jochen Brüning; Evgeny Korotyaev; Igor Lobanov

2007-07-26T23:59:59.000Z

450

Reactor operation environmental information document  

SciTech Connect (OSTI)

The Savannah River Site (SRS) is a large United States Department of Energy installation on the upper Atlantic Coastal Plain of South Carolina. The SRS contains diverse habitats, flora, and fauna. Habitats include upland terrestrial areas, varied wetlands including Carolina Bays, the Savannah River swamp system, and impoundment related and riparian wetlands, and the aquatic habitats of several stream systems, two large cooling reservoirs, and the Savannah River. These diverse habitats support a large variety of plants and animals including many commercially or recreational valuable species and several rare, threatened or endangered species. This volume describes the major habitats and their biota found on the SRS, and discuss the impacts of continued operation of the K, L, and P production reactors.

Wike, L.D.; Specht, W.L.; Mackey, H.E.; Paller, M.H.; Wilde, E.W.; Dicks, A.S.

1989-12-01T23:59:59.000Z

451

Long term performance of 137 stack gas continuous emission monitors  

SciTech Connect (OSTI)

Performance data were obtained on 137 monitors representing a total operating time of 1,600,000 hours. The monitors were classified as follows: 74 NO/sub x/, 37 SO/sub 2/, 7 combination NO/sub x//SO/sub 2/, 8 O/sub 2/, and 11 opacity. Results show that data processor failure accounted for 84% of O/sub 2/, 74% of the opacity, and 61% of the combination SO/sub 2//NO/sub x/ continuous emission monitor malfunctions. Each of these three types of moniters had the same average malfunction time (17 hours). Data from one source, a refinery, estimated operation, calibration, and maintenance costs to be $70,000/yr/monitor. (JMT)

Hebert, R.P. (Scott Environmental Tech., Inc., San Bernardino, CA); Mitchell, W.J.

1983-02-01T23:59:59.000Z

452

Energy Harvesting Communications with Continuous Energy Arrivals  

E-Print Network [OSTI]

Energy Harvesting Communications with Continuous Energy Arrivals Burak Varan Kaya Tutuncuoglu Aylin--This work considers an energy harvesting transmit- ter that gathers a continuous flow of energy from intermittent sources, thus relaxing the modeling assumption of discrete amounts of harvested energy present

Yener, Aylin

453

CONTINUOUS COFINAL MAPS ON ULTRAFILTERS NATASHA DOBRINEN  

E-Print Network [OSTI]

continuous cofinal maps if whenever an ultrafilter V is Tukey reducible to U, then there is a monotone of supporting continuous cofinal maps is inherited under Tukey reducibility. Second, we show that countable of the first part. Thus, if U is Tukey reducible to a countable iter- ation of Fubini products of p

Dobrinen, Natasha

454

Development of a Multi-Step Synthesis and Workup Sequence for an Integrated, Continuous Manufacturing Process of a Pharmaceutical  

E-Print Network [OSTI]

The development and operation of the synthesis and workup steps of a fully integrated, continuous manufacturing plant for synthesizing aliskiren, a small molecule pharmaceutical, are presented. The plant started with ...

Heider, Patrick L.

455

Method for reliability analysis of complex reactor systems. [LMFBR  

SciTech Connect (OSTI)

A method and a computer code for efficient and accurate reliability analyses of complex reactor systems are described and illustrated through an example. The method permits realistic analyses through its ability to accurately model and evaluate instantaneous and average unavailabilities for large systems with dependencies. The component models can include continuously monitored, non-repairable, and periodically tested components which are subject to failures resulting from components which are subject to failures resulting from component demands, stand-by conditions, human errors associated with testing and repair, as well as failures during actual operation. The numerical process used is efficient and allows analysis of general system configurations with arbitrary scheduling of maintenance operations.

Elerath, J.G.; Vaurio, J.K.; Wood, A.P.

1982-01-01T23:59:59.000Z

456

Hybrid method of deterministic and probabilistic approaches for continuous energy neutron transport problem  

SciTech Connect (OSTI)

This paper presents a new hybrid method of continuous energy Monte Carlo (MC) and multi-group Method of Characteristics (MOC). For a continuous energy neutron transport analysis, the hybrid method employs a continuous energy MC for resonance energy range to treat the resonances accurately and a multi-group MOC for high and low energy ranges for efficiency. Numerical test with a model problem confirms that the hybrid method can produce consistent results with the reference continuous energy MC-only calculation as well as multi-group MOC-only calculation. (authors)

Lee, H.; Lee, D. [Ulsan National Institute of Science and Technology UNIST, gil 50, Eonyang-eup, Ulju-gun, Ulsan, 689-798 (Korea, Republic of)

2013-07-01T23:59:59.000Z

457

Potential for supplying solar thermal energy to industrial unit operations  

SciTech Connect (OSTI)

Previous studies have identified major industries deemed most appropriate for the near-term adoption of solar thermal technology to provide process heat; these studies have been based on surveys that followed standard industrial classifications. This paper presents an alternate, perhaps simpler analysis of this potential, considered in terms of the end-use of energy delivered to industrial unit operations. For example, materials, such as animal feed, can be air dried at much lower temperatures than are currently used. This situation is likely to continue while economic supplies of natural gas are readily available. However, restriction of these supplies could lead to the use of low-temperature processes, which are more easily integrated with solar thermal technology. The adoption of solar technology is also favored by other changes, such as the relative rates of increase of the costs of electricity and natural gas, and by energy conservation measures. Thus, the use of low-pressure steam to provide process heat could be replaced economically with high-temperature hot water systems, which are more compatible with solar technology. On the other hand, for certain operations such as high-temperature catalytic and distillation processes employed in petroleum refining, there is no ready alternative to presently employed fluid fuels.

May, E.K.

1980-04-01T23:59:59.000Z

458

LBL CONTINUOUS BIOMASS LIQUEFACTION PROCESS ENGINEERING UNIT (PEU)  

E-Print Network [OSTI]

0092 UC-61 ORNIA LBL CONTINUOUS BIOMASS LIQUEFACTION PROCESSLBL~l0092 LBL CONTINUOUS BIOMASS LIQUEFACTION PROCESSof Energy LBL CONTINUOUS BIOMASS LIQUEFACTION PROCESS

Figueroa, Carlos

2012-01-01T23:59:59.000Z

459

Cask fleet operations study  

SciTech Connect (OSTI)

The Nuclear Waste Policy Act of 1982 assigned to the Department of Energy's (DOE) Office of Civilian Waste Management the responsibility for disposing of high-level waste and spent fuel. A significant part of that responsibility involves transporting nuclear waste materials within the federal waste management system; that is, from the waste generator to the repository. The lead responsibility for transportation operations has been assigned to Oak Ridge Operations, with Oak Ridge National Laboratory (ORNL) providing technical support through the Transportation Operations Support Task Group. One of the ORNL support activities involves assessing what facilities, equipment and services are required to assure that an acceptable, cost-effective and safe transportation operations system can be designed, operated and maintained. This study reviews, surveys and assesses the experience of Nuclear Assurance Corporation (NAC) in operating a fleet of spent-fuel shipping casks to aid in developing the spent-fuel transportation system.

Not Available

1988-01-01T23:59:59.000Z

460

Pipeline Operations Program (Louisiana)  

Broader source: Energy.gov [DOE]

The Pipeline Operations Program regulates the construction, acquisition, abandonment and interconnection of natural gas pipelines, as well as, the transportation and use of natural gas supplies.

Note: This page contains sample records for the topic "analysis continued operation" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Hyponormality of Toeplitz Operators  

E-Print Network [OSTI]

Amer. Math. Soc. 82(1976), 494-496. [12] S. C. Power. Hankel Operators on Hilbert Space, Pitman, Boston, 1982. [13] D. Sarason. Generalized interpolation in H.

1910-40-52T23:59:59.000Z

462

Semicausal operations are semilocalizable  

E-Print Network [OSTI]

We prove a conjecture by DiVincenzo, which in the terminology of Preskill et al. [quant-ph/0102043] states that ``semicausal operations are semilocalizable''. That is, we show that any operation on the combined system of Alice and Bob, which does not allow Bob to send messages to Alice, can be represented as an operation by Alice, transmitting a quantum particle to Bob, and a local operation by Bob. The proof is based on the uniqueness of the Stinespring representation for a completely positive map. We sketch some of the problems in transferring these concepts to the context of relativistic quantum field theory.

Eggeling, T; Werner, R F

2002-01-01T23:59:59.000Z

463

Efficient salt removal in a continuously operated upflow microbial desalination cell with an air cathode  

E-Print Network [OSTI]

., 2006). Since ion transport is needed to maintain charge bal- ance and generate electricity (Rozend and proton transport in the UMDC were discussed. These results demonstrated the potential of the UMDC be accomplished using thermal technology and membrane technology, both of which have been commercialized

464

Equality of bulk and edge Hall conductances for continuous magnetic random Schrödinger operators  

E-Print Network [OSTI]

In this note, we prove the equality of the quantum bulk and the edge Hall conductances in mobility edges and in presence of disorder. The bulk and edge perturbations can be either of electric or magnetic nature. The edge conductance is regularized in a suitable way to enable the Fermi level to lie in a region of localized states.

Amal Taarabt

2014-03-30T23:59:59.000Z

465

Settle legal disputes to assure the contin-ued operation and growth of business and  

E-Print Network [OSTI]

of airports, port facilities, high- way and dam projects, and electrical power plants. Assist correlations between climate and disease/physical dis- orders. public utilities Determine levels of electrical. Public 13%Academic 4% Government 6% Business 77% WHO ARE OUR USERS? LITIGATION MEDICAL MISSION STATEMENT

466

Improving Building Control and System Operation Through the Continuous Commissioning® Process: A Case Study  

E-Print Network [OSTI]

Constant remote static pressure setpoint (varied by season) 0.75 - 1.75 in. w.c. Supply air temperature Constant setpoint (varied by season) 62 - 70?F Cooling coil valve 3-way mixing N/A Economizer enable Enabled when Toa manual ball valves in the bypass line from the bottom or normally open port of the 3- way valves...

Redmann, N.; Liu, M.

2003-01-01T23:59:59.000Z

467

The Business and Technical Case for Continuous Commissioning for Enhanced Building Operations  

E-Print Network [OSTI]

problems, improve comfort, optimize energy use, and identify retrofits in existing commercial and institutional buildings, and central plant facilities. It is also known as retro-commissioning. A summary of the Energy Systems Laboratory (ESL) experience...

Verdict, M.

2006-01-01T23:59:59.000Z

468

EIS-0380: Site-Wide Environmental Impact Statement for Continued Operation  

Broader source: Energy.gov (indexed) [DOE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarly Career Scientists'Montana.Program - LibbyofThis EIS evaluates the potentialTheTheStatement |Nationalof

469

Microsoft Word - Environmental Document for Continued Operation of LLNL August 2011.docx  

National Nuclear Security Administration (NNSA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartmentNational Nuclear SecurityNationalApplyMaintaining theMembershipFiscalMarch 28,

470

Microsoft Word - Attachment J-5 Continuity of Operations Plan.doc  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: VegetationEquipment Surfaces andMappingENVIRONMENTAL IMPACT STATEMENTbelow).A3PM-10978,B toPD -5-1

471

Sample Business Plan Framework 1: A program seeking to continue operations  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion | Department ofT ib l LPROJECTS IN7 RoadmapProgram 2013:Safety2 DOE Hydrogen andSalt Wasteofin

472

Managing the Business Continuity of Information Technology  

E-Print Network [OSTI]

the Public's Business: Continuity Planning & NYS Government As the title describes, this work deals with continuity planning for the New York State government, and it goes through its evolution over a twenty year period of continuity planning until after... to be purchased anyway after a disaster. If the building where an organization’s digital data is destroyed, even after retrieving an off-site backup of that data, they would need the hardware to retrieve the data from the backup and to use it effectively in a...

Kissell, Jeremy

2008-12-19T23:59:59.000Z

473

Operating System Resource Management  

E-Print Network [OSTI]

Operating System Resource Management Date: Monday, September 27, 2010 Time: 2:00 ­ 3:00 pm Location constrained. This talk will propose a scheme for addressing the operating system resource management problem Sciences Seminar Series presents Pacific Northwest National Laboratory Resource management is the dynamic

474

Ordered involutive operator spaces  

E-Print Network [OSTI]

This is a companion to recent papers of the authors; here we construct the `noncommutative Shilov boundary' of a (possibly nonunital) selfadjoint ordered space of Hilbert space operators. The morphisms in the universal property of the boundary preserve order. As an application, we consider `maximal' and `minimal' unitizations of such ordered operator spaces.

Blecher, David P; Neal, Matthew; Werner, Wend

2007-01-01T23:59:59.000Z

475

Operations Research + Information Engineering  

E-Print Network [OSTI]

and the equipment they operate to perform most efficiently. The allocation of resources may be represented of the techniques and modeling concepts needed to analyze and design complex systems. As an operations researcher. All business systems are complex and need sophisticated decision-making methods that enable employees

Keinan, Alon

476

MANUFACTURING & SERVICE OPERATIONS MANAGEMENT  

E-Print Network [OSTI]

;Green and Soares: Note Manufacturing & Service Operations Management 9(1), pp. 54­61, © 2007 INFORMS 55MANUFACTURING & SERVICE OPERATIONS MANAGEMENT Vol. 9, No. 1, Winter 2007, pp. 54­61 issn 1523-Dependent Waiting Time Probabilities in M t /M/s t Queuing Systems Linda V. Green Graduate School of Business

Soares, João Luís Cardoso

477

OPERATIONS MANAGEMENT Spring 2008  

E-Print Network [OSTI]

1 MGSC 395 OPERATIONS MANAGEMENT Spring 2008 Course Syllabus Instructor: Professor Anand Nair Class MATERIALS Required Text Books Textbook: Krajewski, Lee, Ritzman, Larry, and Malhotra, Manoj. Operations Management: Processes and Value Chains, 8 th edition, Prentice Hall, 2007. (ISBN: 0-13-187294-X). Novel

Almor, Amit

478

Naturalistic Decision Making for Power System Operators  

SciTech Connect (OSTI)

Motivation – Investigations of large-scale outages in the North American interconnected electric system often attribute the causes to three T’s: Trees, Training and Tools. To document and understand the mental processes used by expert operators when making critical decisions, a naturalistic decision making (NDM) model was developed. Transcripts of conversations were analyzed to reveal and assess NDM-based performance criteria. Findings/Design – An item analysis indicated that the operators’ Situation Awareness Levels, mental models, and mental simulations can be mapped at different points in the training scenario. This may identify improved training methods or analytical/ visualization tools. Originality/Value – This study applies for the first time, the concepts of Recognition Primed Decision Making, Situation Awareness Levels and Cognitive Task Analysis to training of electric power system operators. Take away message – The NDM approach provides a viable framework for systematic training management to accelerate learning in simulator-based training scenarios for power system operators and teams.

Greitzer, Frank L.; Podmore, Robin; Robinson, Marck; Ey, Pamela

2010-02-01T23:59:59.000Z

479

CNMS Operations/ESH Highlights  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation Proposed New Substation Sites Proposed Route BTRIC CNMS CSMBLynda NicelyAnalysisOperations/ESH

480

U.S. Nuclear Power Plants: Continued Life or Replacement After 60? (released in AEO2010)  

Reports and Publications (EIA)

Nuclear power plants generate approximately 20% of U.S. electricity, and the plants in operation today are often seen as attractive assets in the current environment of uncertainty about future fossil fuel prices, high construction costs for new power plants (particularly nuclear plants), and the potential enactment of greenhouse gas regulations. Existing nuclear power plants have low fuel costs and relatively high power output. However, there is uncertainty about how long they will be allowed to continue operating.

2010-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "analysis continued operation" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Continuous Commissioning Based on the European Energy Performance of Buildings Directive and Intelligent Monitoring  

E-Print Network [OSTI]

H, Stuttgart/Kornwestheim Germany Christian Neumann Operating agent Building EQ Fraunhofer-Institute for Solar Energy Systems Freiburg, Germany ABSTRACT The Save Project BuildingEQ ?Tools and methods for linking EPBD and continuous commissioning... behaviour of the building available at this state. ESL-IC-08-10-08 Proceedings of the Eighth International Conference for Enhanced Building Operations, Berlin, Germany, October 20-22, 2008 Page 2 of paper submitted to ICEBO 2008 Berlin Figure 1...

Schmidt, F.; Neumann, C.

482

Automatic tuning of continuous-time filters  

E-Print Network [OSTI]

Integrated high-Q continuous-time filters require adaptive tuning circuits that will correct the filter parameters such as center frequency and quality factor (Q). Three different automatic tuning techniques are introduced. In all of the proposed...

Sumesaglam, Taner

2004-11-15T23:59:59.000Z

483

Partnerships to continue moving toward zero emissions  

E-Print Network [OSTI]

Partnerships to continue moving toward zero emissions Zero Emission transportation goals Zero Emission MAP makes available technical assistance to states and cities to support the growth of zero emission mobility markets. 1 Research shows

California at Davis, University of

484

Invertible Program Restructurings for Continuing Modular Maintenance  

E-Print Network [OSTI]

Invertible Program Restructurings for Continuing Modular Maintenance Julien Cohen ASCOLA team (EMN in main- tenance with invertible program transformations. We illustrate this on the typical Expression problems with our approach. Keywords-modular maintenance; restructuring; invertible pro- gram

Paris-Sud XI, Université de

485

Evaluation of continuous glucose monitoring systems  

E-Print Network [OSTI]

There has been much hype in the research and development of continuous glucose monitoring technologies, driven by the enormous and rapidly expanding glucose monitoring market and the large and growing base of diabetes ...

Li, Guang, M. Eng. Massachusetts Institute of Technology

2008-01-01T23:59:59.000Z

486

Continuous Growth of Vertically Aligned Carbon Nanotubes  

E-Print Network [OSTI]

Vertically aligned carbon nanotubes (VACNTs), sometimes called forests or carpets, are a promising material due to their unique physical and scale-dependent physical properties [1-3]. Continuous production of VACNTs is ...

Guzman de Villoria, R.

487

Alpha-environmental continuous air monitor inlet  

DOE Patents [OSTI]

A wind deceleration and protective shroud that provides representative samples of ambient aerosols to an environmental continuous air monitor (ECAM) has a cylindrical enclosure mounted to an input on the continuous air monitor, the cylindrical enclosure having shrouded nozzles located radially about its periphery. Ambient air flows, often along with rainwater flows into the nozzles in a sampling flow generated by a pump in the continuous air monitor. The sampling flow of air creates a cyclonic flow in the enclosure that flows up through the cylindrical enclosure until the flow of air reaches the top of the cylindrical enclosure and then is directed downward to the continuous air monitor. A sloped platform located inside the cylindrical enclosure supports the nozzles and causes any moisture entering through the nozzle to drain out through the nozzles.

Rodgers, John C. (Santa Fe, NM)

2003-01-01T23:59:59.000Z

488

Continuous flow separation techniques for microchemical synthesis  

E-Print Network [OSTI]

Performing multistep microchemical synthesis requires many techniques from combining micromixers in series to the development of continuous microfluidic separation tools. Safety, high heat and mass transfer rates, and cost ...

Kralj, Jason G

2006-01-01T23:59:59.000Z

489

Method for the continuous production of hydrogen  

DOE Patents [OSTI]

The present invention is a method for the continuous production of hydrogen. The present method comprises reacting a metal catalyst with a degassed aqueous organic acid solution within a reaction vessel under anaerobic conditions at a constant temperature of .ltoreq.80.degree. C. and at a pH ranging from about 4 to about 9. The reaction forms a metal oxide when the metal catalyst reacts with the water component of the organic acid solution while generating hydrogen, then the organic acid solution reduces the metal oxide thereby regenerating the metal catalyst and producing water, thus permitting the oxidation and reduction to reoccur in a continual reaction cycle. The present method also allows the continuous production of hydrogen to be sustained by feeding the reaction with a continuous supply of degassed aqueous organic acid solution.

Getty, John Paul (Knoxville, TN); Orr, Mark T. (Kingsport, TN); Woodward, Jonathan (Kingston, TN)

2002-01-01T23:59:59.000Z

490

Magnetically enhanced centrifugation for continuous biopharmaceutical processing  

E-Print Network [OSTI]

Effective separation and purification of biopharmaceutical products from the media in which they are produced continues to be a challenging task. Such processes usually involve multiple steps and the overall product loss ...

Chen, Fei, Ph. D. Massachusetts Institute of Technology

2009-01-01T23:59:59.000Z

491

QuarterlyCouncil Continued on page 2  

E-Print Network [OSTI]

QuarterlyCouncil Continued on page 2 98 > In this issue Council Decisions > Updates on Council ­ or mishandled, in his opinion ­ important issues such as education funding. He's concerned about

492

SPEAR 3: the First Year of Operation  

SciTech Connect (OSTI)

The first electrons were accumulated in the newly completed 3-GeV SPEAR 3 storage ring on December 15, 2003, five days after the beginning of commissioning. By mid-January of 2004, 100 mA were stored, the maximum current allowed in the first phase of SPEAR 3 operation, and ring characterization and tuning continued until early March when the first photon beam line was opened for users. After the first year of operation the SPEAR 3 beam properties and ring performance had been extensively measured. These include micron stability using slow orbit feedback, an emittance coupling of {approx}0.1% and 50-h lifetimes. The performance of SPEAR 3 during its first year of commissioning and operation and the improvement plans are described.

Hettel, R.O.; /SLAC

2006-02-10T23:59:59.000Z

493

RADCAL Operations Manual Radiation Calibration Laboratory Protocol  

SciTech Connect (OSTI)

The Life Sciences Division (LSD) of Oak Ridge National Laboratory (ORNL) has a long record of radiation dosimetry research, primarily using the Health Physics Research Reactor (HPRR) and the Radiation Calibration Laboratory (RADCAL) in its Dosimetry Applications Research (DOSAR) Program. These facilities have been used by a broad segment of the research community to perform a variety of experiments in areas including, but not limited to, radiobiology, radiation dosimeter and instrumentation development and calibration, and the testing of materials in a variety of radiation environments. Operations of the HPRR were terminated in 1987 and the reactor was moved to storage at the Oak Ridge Y-12 Plant; however, RADCAL will continue to be operated in accordance with the guidelines of the National Institute of Standards and Technology (NIST) Secondary Calibration Laboratory program and will meet all requirements for testing dosimeters under the National Voluntary Laboratory Accreditation Program (NVLAP). This manual is to serve as the primary instruction and operation manual for the Oak Ridge National Laboratory's RADCAL facility. Its purpose is to (1) provide operating protocols for the RADCAL facility, (2) outline the organizational structure, (3) define the Quality Assurance Action Plan, and (4) describe all the procedures, operations, and responsibilities for the safe and proper operation of all routine aspects of the calibration facility.

Bogard, J.S.

1998-12-01T23:59:59.000Z

494

Occurrence reporting and processing of operations information  

SciTech Connect (OSTI)

DOE O 232.1A, Occurrence Reporting and Processing of Operations Information, and 10 CFR 830.350, Occurrence Reporting and Processing of Operations Information (when it becomes effective), along with this manual, set forth occurrence reporting requirements for Department of Energy (DOE) Departmental Elements and contractors responsible for the management and operation of DOE-owned and -leased facilities. These requirements include categorization of occurrences related to safety, security, environment, health, or operations (``Reportable Occurrences``); DOE notification of these occurrences; and the development and submission of documented follow-up reports. This Manual provides detailed information for categorizing and reporting occurrences at DOE facilities. Information gathered by the Occurrence Reporting and processing System is used for analysis of the Department`s performance in environmental protection, safeguards and security, and safety and health of its workers and the public. This information is also used to develop lessons learned and document events that significantly impact DOE operations.

NONE

1997-07-21T23:59:59.000Z

495

Operating experience with 100% pellet burden on Amanda blast furnace  

SciTech Connect (OSTI)

A number of significant changes in operations at the Ashland Works of the Armco Steel Company occurred in 1992 which directly impacted the Amanda Blast Furnace operation. These changes included the shutdown of the hot strip mill which resulted in coke oven gas enrichment of the Amanda stoves and an increase of 75 C in hot blast temperature, transition to 100% continuous cast operation which resulted in increased variation of the hot metal demand, and the July idling of the sinter plant. Historically, the Amanda Blast Furnace burden was 30% fluxed sinter and 70% acid pellet. It was anticipated that the change to 100% pellet burden would require changes in charging practice and alter furnace performance. The paper gives a general furnace description and then describes the burden characteristics, operating practice with 30% sinter/70% acid pellet burden, preparations for the 100% acid pellet burden operation, the 100% acid pellet operation, and the 100% fluxed pellet burden operation.

Keaton, D.E.; Minakawa, T. (Armco Steel Co., Middletown, OH (United States). Ironmaking Dept.)

1993-01-01T23:59:59.000Z

496

Continuous Dynamic Constrained Optimisation - The Challenges  

E-Print Network [OSTI]

T.T. Nguyen is with The School of Engineering, Technology and Maritime. Operations ...... such as SRES [38], [41] and SMES [39] become much less effective in ...

2011-10-25T23:59:59.000Z

497

Earned Value Management System (EVMS) and Project Analysis Standard...  

Broader source: Energy.gov (indexed) [DOE]

Management System (EVMS) and Project Analysis Standard Operating Procedure (EPASOP)- March 2014 Earned Value Management System (EVMS) and Project Analysis Standard Operating...

498

Headquarters Security Operations  

Broader source: Energy.gov [DOE]

DOE strengthens national security by protecting personnel, facilities, property, classified information, and sensitive unclassified information for DOE Headquarters facilities in the National Capital Area under normal and abnormal (i.e., emergency) conditions; manages access authorization functions; ensures that executives and dignitaries are fully protected, and supports efforts to ensure the continuity of government in all circumstances as mandated by Presidential Decision Directive.