Sample records for advancing good practice

  1. Low-Carbon Growth Plans: Advancing Good Practice | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual SiteofEvaluatingGroup |Jilin ZhongdiantouLichuanInformationLoremoJobsPlans: Advancing Good

  2. South Carolina Farm Auditing Program Good Agricultural Practices and Good

    E-Print Network [OSTI]

    Duchowski, Andrew T.

    South Carolina Farm Auditing Program Good Agricultural Practices and Good Handling Practices Audit of charts #12;Additional Requirements · Signs must be in English and Spanish · Good hygiene practices Verification Program Jack Dantzler Director of Inspections and Grading South Carolina Department of Agriculture

  3. South Carolina Farm Auditing Good Agricultural Practices and Good Handling

    E-Print Network [OSTI]

    Duchowski, Andrew T.

    South Carolina Farm Auditing Program Good Agricultural Practices and Good Handling Practices Audit of charts #12;Additional Requirements Signs must be in English and Spanish Good hygiene practices Water Verification Program Jack Dantzler Director of Inspections and Grading South Carolina Department of Agriculture

  4. Academic good practice a practical guide The principles of academic good practice go beyond understanding and avoiding plagiarism,

    E-Print Network [OSTI]

    Oxford, University of

    Academic good practice ­ a practical guide The principles of academic good practice go beyond discipline. Contents Academic good practice ­ a practical guide work. This section contains information and advice on attaining academic good practice, including

  5. ESSENCE Good practice document series to improving

    E-Print Network [OSTI]

    Rambaut, Andrew

    ESSENCE Good practice document series 2012 Five keys to improving research costing in low ESSENCE Good practice document series Five keys to improving research costing in low- and middle- income countries 2012 ESSENCE Good practice document series Contents About ESSENCE and this 2 good practise

  6. Good Architecture = Good (ADL + Practices) Vincent Le Gloahec

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Good Architecture = Good (ADL + Practices) Vincent Le Gloahec 1,3 , Regis Fleurquin 2 , and Salah of the software architecture. We treat rst the case of architecture design activity because it's the basis from the context of our indus- trial partner. Key words: Best Practices, Design, Software Architecture

  7. Trinity College Dublin Good Research Practice

    E-Print Network [OSTI]

    O'Mahony, Donal E.

    1 Trinity College Dublin Policy on Good Research Practice Update 1.0 ­ May 2009 Recommended conducted at Trinity College, Dublin for over four centuries. In that time, there has been no indication, to bring Trinity into line with best international practice the Board adopted a policy on Good Research

  8. Energy from Waste: A good practice guide

    E-Print Network [OSTI]

    Columbia University

    including central and local Government, the public and professional waste managers. Since the publication of a more sustainable approach to waste management, involving public participation, greater levels new to municipal waste management, and drawing on good practice from the UK and overseas, I am sure

  9. Good Practice Guide on Firewall Deployment for SCADA and Process...

    Energy Savers [EERE]

    Good Practice Guide on Firewall Deployment for SCADA and Process Control Networks Good Practice Guide on Firewall Deployment for SCADA and Process Control Networks In recent years,...

  10. Guide to good practices for independent verification

    SciTech Connect (OSTI)

    NONE

    1998-12-01T23:59:59.000Z

    This Guide to Good Practices is written to enhance understanding of, and provide direction for, Independent Verification, Chapter X of Department of Energy (DOE) Order 5480.19, Conduct of Operations Requirements for DOE Facilities. The practices in this guide should be considered when planning or reviewing independent verification activities. Contractors are advised to adopt procedures that meet the intent of DOE Order 5480.19. Independent Verification is an element of an effective Conduct of Operations program. The complexity and array of activities performed in DOE facilities dictate the necessity for coordinated independent verification activities to promote safe and efficient operations.

  11. Harvard Open Access Project Good Practices For University

    E-Print Network [OSTI]

    Chen, Yiling

    Talking about a policy 66 Revising this guide 67 Additional resources 71 (Endnotes) #12;Good Practices Practices for University Open-Access Policies Preface This is a guide to good practices for university open2013-09-30 Harvard Open Access Project Good Practices For University Open-Access Policies Edited

  12. Event Registration Form International Good Manufacturing Practices Conference -#71683

    E-Print Network [OSTI]

    Arnold, Jonathan

    Event Registration Form International Good Manufacturing Practices Conference - #71683 03 No Total $______ Please specify any additional dietary restrictions or allergies-884-1419 -- Credit Card Only Mail: International Good Manufacturing Practices Conference ­ #71683 The Georgia Center

  13. Advanced Policy Practice Spring 2014

    E-Print Network [OSTI]

    Grissino-Mayer, Henri D.

    Advanced Policy Practice Spring 2014 SW 548-001 Instructor course that focuses on the theory and evidence-based skill sets of policy analysis, development, implementation, and change. The course focuses on policy

  14. GOOD SCIENTIFIC PRACTICE at Carl von Ossietzky University Oldenburg

    E-Print Network [OSTI]

    Damm, Werner

    GOOD SCIENTIFIC PRACTICE at Carl von Ossietzky University Oldenburg K O M M I S S I O N F Ü R F O R OF RESEARCH EFFECTS #12;1 Guidelines for good scientific practice at Carl von Ossietzky University (30. Guidelines, 1. Allgemeine Prinzipien wissenschaftlicher Arbeit. Good scientific practice at Carl von

  15. Defense programs beryllium good practice guide

    SciTech Connect (OSTI)

    Herr, M.

    1997-07-01T23:59:59.000Z

    Within the DOE, it has recently become apparent that some contractor employees who have worked (or are currently working) with and around beryllium have developed chronic beryllium disease (CBD), an occupational granulomatous lung disorder. Respiratory exposure to aerosolized beryllium, in susceptible individuals, causes an immunological reaction that can result in granulomatous scarring of the lung parenchyma, shortness of breath, cough, fatigue, weight loss, and, ultimately, respiratory failure. Beryllium disease was originally identified in the 1940s, largely in the fluorescent light industry. In 1950, the Atomic Energy Commission (AEC) introduced strict exposure standards that generally curtailed both the acute and chronic forms of the disease. Beginning in 1984, with the identification of a CBD case in a DOE contractor worker, there was increased scrutiny of both industrial hygiene practices and individuals in this workforce. To date, over 100 additional cases of beryllium-specific sensitization and/or CBD have been identified. Thus, a disease previously thought to be largely eliminated by the adoption of permissible exposure standards 45 years ago is still a health risk in certain workforces. This good practice guide forms the basis of an acceptable program for controlling workplace exposure to beryllium. It provides (1) Guidance for minimizing worker exposure to beryllium in Defense Programs facilities during all phases of beryllium-related work, including the decontamination and decommissioning (D&D) of facilities. (2) Recommended controls to be applied to the handling of metallic beryllium and beryllium alloys, beryllium oxide, and other beryllium compounds. (3) Recommendations for medical monitoring and surveillance of workers exposed (or potentially exposed) to beryllium, based on the best current understanding of beryllium disease and medical diagnostic tests available. (4) Site-specific safety procedures for all processes of beryllium that is likely to generate dusts, mists, fumes, or small particulates. A beryllium exposure control program should minimize airborne concentrations, the potential for and spread of contamination, the number of times individuals are exposed to beryllium, and the number of employees who may be potentially exposed.

  16. Twin Cities Metro Advanced Practice Center

    E-Print Network [OSTI]

    Offsite cold storage options (contact info for truck, warehouse) #12;Twin Cities Metro Advanced Practice

  17. Psychologically Healthy Workplace Practices = Good Business

    Broader source: Energy.gov [DOE]

    Creating a psychologically healthy workplace is not just the right thing to do for employees; it’s also the smart thing to do for an organization’s financial well being and productivity. A small investment in psychologically healthy work practices can pay big dividends in years to come.

  18. Good Practice in the Exploitation of Innovative Strategies in Sustainable Urban Transport: City Interview Synthesis

    E-Print Network [OSTI]

    Marsden, Greg; Frick, Karen Trapenberg; May, Anthony D.; Deakin, Elizabeth A

    2009-01-01T23:59:59.000Z

    of interest and good practice guides were also mentioned asdissemination, including good practice guides and web-based

  19. LOCH/ARMA Open Access Good Practice - University of Edinburgh 

    E-Print Network [OSTI]

    Tate, Dominic

    2015-03-19T23:59:59.000Z

    Presentation delivered by Dominic Tate at ARMA Open Access Good Practice event (London 19-03-2015). These slides detail the University of Edinbugh's approach to implementing Open Access requirements for the post-2014 REF....

  20. LOCH/ARMA Open Access Good Practice - St Andrews University 

    E-Print Network [OSTI]

    Aucock, Janet

    2015-03-19T23:59:59.000Z

    Presentation delivered by Janet Aucock at ARMA Open Access Good Practice event (London 19-03-2015). These slides detail St Andrews University's approach to implementing Open Access requirements for the post-2014 REF....

  1. Health physics manual of good practices for tritium facilities

    SciTech Connect (OSTI)

    Blauvelt, R.K.; Deaton, M.R.; Gill, J.T. [and others

    1991-12-01T23:59:59.000Z

    The purpose of this document is to provide written guidance defining the generally accepted good practices in use at Department of Energy (DOE) tritium facilities. A {open_quotes}good practice{close_quotes} is an action, policy, or procedure that enhances the radiation protection program at a DOE site. The information selected for inclusion in this document should help readers achieve an understanding of the key radiation protection issues at tritium facilities and provide guidance as to what characterizes excellence from a radiation protection point of view. The ALARA (As Low as Reasonable Achievable) program at DOE sites should be based, in part, on following the good practices that apply to their operations.

  2. Guide to good practices for operations aspects of unique processes

    SciTech Connect (OSTI)

    Not Available

    1993-06-01T23:59:59.000Z

    This Guide to Good Practices is written to enhance understanding of, and provide direction for, Operations Aspects of Facility Chemistry and Unique Process, Chapter 13 of Department of Energy (DOE) Order 5480.19, ``Conduct of Operations Requirements for DOE Facilities.`` The practices in this guide should be considered when planning or reviewing employee training and facility management programs. Contractors are advised to adopt procedures that meet the intent of DOE Order 5480.19.

  3. Towards an Automation of Software Evolution Good Practices Chouki Tibermacine

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    that software evolution is an inescapable activity in the software lifecycle. In order to prevent the neg- ative of assistance to software evolution. This assistance makes it possible to guide the developer when applyingTowards an Automation of Software Evolution Good Practices Chouki Tibermacine LIRMM, CNRS

  4. Guide to good practices for developing learning objectives. DOE Handbook

    SciTech Connect (OSTI)

    NONE

    1992-07-01T23:59:59.000Z

    This guide to good practices provides information and guidance on the types of and development of learning objectives in a systematic approach to training program. This document can serve as a reference during the development of new learning objectives or refinement of existing ones.

  5. Guide to good practices for operations aspects of unique processes

    SciTech Connect (OSTI)

    NONE

    1998-12-01T23:59:59.000Z

    This Guide to Good Practices is written to enhance understanding of, and provide direction for, Operations Aspects of Facility Chemistry and Unique Processes, Chapter XIII of Department of Energy (DOE) Order 5480.19, Conduct of Operations Requirements for DOE Facilities. The practices in this guide should be considered when planning or reviewing employee training and facility management programs. Contractors are advised to adopt procedures that meet the intent of DOE Order 5480.19. Operations Aspects of Unique Processes is an element of an effective Conduct of Operations program. The complexity and array of activities performed in DOE facilities dictate the necessity for all personnel to coordinate interrelated activities affecting unique processes.

  6. Guide to good practices for on-the-job training

    SciTech Connect (OSTI)

    Not Available

    1992-07-01T23:59:59.000Z

    The purpose of the Department of Energy (DOE) Guide to Good Practices for On-the-Job Training (OJT) is to provide DOE contractor organizations with information that can be used to modify existing programs or to develop new programs. This guide replaces the Guide to Good Practices for On-the-Job Training that was distributed to DOE and DOE contractors in 1987. DOE contractors should not feel obligated to adopt all parts of this guide. Rather, they can use the information in this guide to develop programs that apply to their facility. This guide can be used as an aid in the design and development of a facility's OJT programs and to assist the instructors who conduct OJT and performance tests in the areas of facility operations, maintenance, and technical supports.

  7. Guide to good practices for lockouts and tagouts: DOE standard

    SciTech Connect (OSTI)

    NONE

    1996-05-01T23:59:59.000Z

    (Lockout/tagout ensures the protection of personnel and equipment by installing tagout and/or lockout devices.) This guide has the purpose of providing direction for Lockouts and Tagouts, Chapter IX of DOE Order 5480.19 (Conduct of Operations Requirements for DOE Facilities). (However, OSHA requirements and good practices take precedence.) Primary purpose of the lockout/tagout programs is to protect employees from exposure to potential hazardous energy sources.

  8. Guide to good practices for on-the-job training

    SciTech Connect (OSTI)

    NONE

    1998-04-01T23:59:59.000Z

    Training programs at DOE facilities should prepare personnel to safely and efficiently operate and maintain the facilities in accordance with DOE requirements. This guide presents good practices for a systematic approach to on-the-job training (OJT) and OJT programs and should be used in conjunction with DOE Training Program Handbook: A Systematic Approach to Training, and with the DOE Handbook entitled Alternative Systematic Approaches to Training to develop performance-based OJT programs. DOE contractors may also use this guide to modify existing OJT programs that do not meet the systematic approach to training (SAT) objectives.

  9. APFED-Good Practice Database | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual Siteof Energy 2,AUDITCaliforniaWeifangwiki Home Jweers'sAIRMaster+APFED-Good Practice

  10. Order Module--DOE-HDBK-1203-97, GUIDE TO GOOD PRACTICES FOR TRAINING...

    Office of Environmental Management (EM)

    HDBK-1203-97, GUIDE TO GOOD PRACTICES FOR TRAINING OF TECHNICAL STAFF AND MANAGERS, DOE-HDBK-1204-97, GUIDE TO GOOD PRACTICES FOR THE DEVELOPMENT OF TEST ITEMS,DOE-HDBK-1205-97,...

  11. Good Practices as a Quality-Oriented Modeling Vincent Le Gloahec

    E-Print Network [OSTI]

    Boyer, Edmond

    Good Practices as a Quality-Oriented Modeling Assistant Vincent Le Gloahec Alkante SAS, France. These good practices are often described in software quality manuals that, in this form, do not guarantee framework enables on the one hand to describe the good practices and on the other hand to check

  12. Guide to good practices for the development of test items

    SciTech Connect (OSTI)

    NONE

    1997-01-01T23:59:59.000Z

    While the methodology used in developing test items can vary significantly, to ensure quality examinations, test items should be developed systematically. Test design and development is discussed in the DOE Guide to Good Practices for Design, Development, and Implementation of Examinations. This guide is intended to be a supplement by providing more detailed guidance on the development of specific test items. This guide addresses the development of written examination test items primarily. However, many of the concepts also apply to oral examinations, both in the classroom and on the job. This guide is intended to be used as guidance for the classroom and laboratory instructor or curriculum developer responsible for the construction of individual test items. This document focuses on written test items, but includes information relative to open-reference (open book) examination test items, as well. These test items have been categorized as short-answer, multiple-choice, or essay. Each test item format is described, examples are provided, and a procedure for development is included. The appendices provide examples for writing test items, a test item development form, and examples of various test item formats.

  13. advanced nursing practice: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Domain Chapman, Michael S. 2 PROGRAMME SPECIFICATION Programme name Advanced Practice in Health and Social Care (Ophthalmic Nursing) Computer Technologies and Information Sciences...

  14. advanced practice nurse: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Domain Chapman, Michael S. 2 PROGRAMME SPECIFICATION Programme name Advanced Practice in Health and Social Care (Ophthalmic Nursing) Computer Technologies and Information Sciences...

  15. advanced practice nurses: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Domain Chapman, Michael S. 2 PROGRAMME SPECIFICATION Programme name Advanced Practice in Health and Social Care (Ophthalmic Nursing) Computer Technologies and Information Sciences...

  16. advanced practice nursing: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Domain Chapman, Michael S. 2 PROGRAMME SPECIFICATION Programme name Advanced Practice in Health and Social Care (Ophthalmic Nursing) Computer Technologies and Information Sciences...

  17. advanced practice experience: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Care Advanced Pharmacy Practice Experience SPPS of the pharmacist in the delivery of health care services, the University of California Skaggs School of Pharmacy is a...

  18. Extreme Security Engineering: On Employing XP Practices to Achieve "Good Enough Security"

    E-Print Network [OSTI]

    Extreme Security Engineering: On Employing XP Practices to Achieve "Good Enough Security" without Main Mall, Vancouver, BC Canada V6T 1Z4 beznosov@ece.ubc.ca ABSTRACT This paper examines practices of eXtreme Security Engineering (XSE), an application of XP practices to security engineering, and discuss its

  19. Identification of good practices in the operation of nuclear power plants

    E-Print Network [OSTI]

    Chen, Haibo, 1975-

    2005-01-01T23:59:59.000Z

    This work developed an approach to diagnose problems and identify good practices in the operation of nuclear power plants using the system dynamics technique. The research began with construction of the ORSIM (Nuclear Power ...

  20. Guide of good practices for occupational radiological protection in plutonium facilities

    SciTech Connect (OSTI)

    NONE

    1998-06-01T23:59:59.000Z

    This Technical Standard (TS) does not contain any new requirements. Its purpose is to provide guides to good practice, update existing reference material, and discuss practical lessons learned relevant to the safe handling of plutonium. the technical rationale is given to allow US Department of Energy (DOE) health physicists to adapt the recommendations to similar situations throughout the DOE complex. Generally, DOE contractor health physicists will be responsible to implement radiation protection activities at DOE facilities and DOE health physicists will be responsible for oversight of those activities. This guidance is meant to be useful for both efforts. This TS replaces PNL-6534, Health Physics Manual of Good Practices for Plutonium Facilities, by providing more complete and current information and by emphasizing the situations that are typical of DOE`s current plutonium operations; safe storage, decontamination, and decommissioning (environmental restoration); and weapons disassembly.

  1. Development and Demonstration of Advanced Forecasting, Power and Environmental Planning and Management Tools and Best Practices

    Broader source: Energy.gov [DOE]

    Development and Demonstration of Advanced Forecasting, Power and Environmental Planning and Management Tools and Best Practices

  2. Guide to good practices for control of on-shift training

    SciTech Connect (OSTI)

    NONE

    1998-12-01T23:59:59.000Z

    This Guide to Good Practices is written to enhance understanding of, and provide direction for, Control of On-Shift Training, Chapter 5 of Department of Energy (DOE) Order 5480.19, Conduct of Operations Requirements for DOE Facilities. The practices in this guide should be considered when planning or reviewing on-shift training programs. ``Control of On-Shift Training`` is an element of an effective Conduct of Operations program. The complexity and array of activities performed in DOE facilities dictate the necessary for a coordinated on-shift training program to meet the continuous demand for skilled, well-trained personnel to promote safe and efficient operations.

  3. Guide to good practices for on-the-job training. DOE guideline

    SciTech Connect (OSTI)

    Not Available

    1992-07-01T23:59:59.000Z

    The purpose of the Department of Energy (DOE) Guide to Good Practices for On-the-Job Training (OJT) is to provide DOE contractor organizations with information that can be used to modify existing programs or to develop new programs. This guide replaces the Guide to Good Practices for On-the-Job Training that was distributed to DOE and DOE contractors in 1987. DOE contractors should not feel obligated to adopt all parts of this guide. Rather, they can use the information in this guide to develop programs that apply to their facility. This guide can be used as an aid in the design and development of a facility`s OJT programs and to assist the instructors who conduct OJT and performance tests in the areas of facility operations, maintenance, and technical supports.

  4. Guide to good practices for training and qualification of instructors. DOE handbook

    SciTech Connect (OSTI)

    NONE

    1996-03-01T23:59:59.000Z

    Purpose of this guide is to provide contractor training organizations with information that can be used to verify the adquacy and/or modify existing instructor training programs, or to develop new training programs. It contains good practices for the training and qualification of technical instructors and instructional technologists at DOE reactor and non-reactor nuclear facilities. It addresses the content of initial and continuing instructor training programs, evaluation of instructor training programs, and maintenance of instructor training records.

  5. Health physics manual of good practices for plutonium facilities. [Contains glossary

    SciTech Connect (OSTI)

    Brackenbush, L.W.; Heid, K.R.; Herrington, W.N.; Kenoyer, J.L.; Munson, L.F.; Munson, L.H.; Selby, J.M.; Soldat, K.L.; Stoetzel, G.A.; Traub, R.J.

    1988-05-01T23:59:59.000Z

    This manual consists of six sections: Properties of Plutonium, Siting of Plutonium Facilities, Facility Design, Radiation Protection, Emergency Preparedness, and Decontamination and Decommissioning. While not the final authority, the manual is an assemblage of information, rules of thumb, regulations, and good practices to assist those who are intimately involved in plutonium operations. An in-depth understanding of the nuclear, physical, chemical, and biological properties of plutonium is important in establishing a viable radiation protection and control program at a plutonium facility. These properties of plutonium provide the basis and perspective necessary for appreciating the quality of control needed in handling and processing the material. Guidance in selecting the location of a new plutonium facility may not be directly useful to most readers. However, it provides a perspective for the development and implementation of the environmental surveillance program and the in-plant controls required to ensure that the facility is and remains a good neighbor. The criteria, guidance, and good practices for the design of a plutonium facility are also applicable to the operation and modification of existing facilities. The design activity provides many opportunities for implementation of features to promote more effective protection and control. The application of ''as low as reasonably achievable'' (ALARA) principles and optimization analyses are generally most cost-effective during the design phase. 335 refs., 8 figs., 20 tabs.

  6. Guide to good practices for control of equipment and system status

    SciTech Connect (OSTI)

    NONE

    1998-12-01T23:59:59.000Z

    This Guide to Good Practices is written to enhance understanding of, and provide direction for, Control of Equipment and System Status, Chapter VIII of Department of Energy (DOE) Order 5480.19, Conduct of Operations Requirements for DOE Facilities. The practices in this guide should be considered when planning or reviewing equipment and system status control programs. Contractors are advised to adopt procedures that meet the intent of DOE Order 5480.19. Control of Equipment and System Status is an element of an effective Conduct of Operations program. The complexity and array of activities performed in DOE facilities dictate the need for a formal status control program to promote safe and efficient operations.

  7. Modular glovebox connector and associated good practices for control of radioactive and chemically toxic materials

    SciTech Connect (OSTI)

    Hoover, M.D.; Mewhinney, C.J.; Newton, G.J. [Lovelace Respiratory Research Inst., Albuquerque, NM (United States)

    1999-01-01T23:59:59.000Z

    Design and associated good practices are described for a modular glovebox connector to improve control of radioactive and chemically toxic materials. The connector consists of an anodized aluminum circular port with a mating spacer, gaskets, and retaining rings for joining two parallel ends of commercially available or custom-manufactured glovebox enclosures. Use of the connector allows multiple gloveboxes to be quickly assembled or reconfigured in functional units. Connector dimensions can be scaled to meet operational requirements for access between gloveboxes. Options for construction materials are discussed, along with recommendations for installation of the connector in new or retrofitted systems. Associated good practices include application of surface coatings and caulking, use of disposable glovebags, and proper selection and protection of gasket and glove materials. Use of the connector at an inhalation toxicology research facility has reduced the time and expense required to reconfigure equipment for changing operational requirements, the dispersion of contamination during reconfigurations, and the need for decommissioning and disposal of contaminated enclosures.

  8. Guide to good practices for the design, development, and implementation of examinations

    SciTech Connect (OSTI)

    NONE

    1997-06-01T23:59:59.000Z

    The purpose of this Guide to Good Practices is to provide direction to training personnel in the broad areas of design, development, and implementation of examinations. Nuclear facilities spend a significant amount of training resources testing trainees. Tests are used for employee selection, qualification, requalification, certification and recertification, and promotion. Ineffective testing procedures, or inappropriate interpretation of test results, can have significant effects on both human performance and facility operations. Test development requires unique skills, and as with any skill, training and experience are needed to develop the skills. Test development, test use, test result interpretation, and test refinement, like all other aspects of the systematic approach to training, should be part of an ongoing, systematic process. For some users this document will provide a review of ideas and principles with which they are already familiar; for others it will present new concepts. While not intended to provide in-depth coverage of test theory design and development, it should provide developers, instructors, and evaluators with a foundation on which to develop sound examinations.

  9. DOE handbook: Guide to good practices for training and qualification of maintenance personnel

    SciTech Connect (OSTI)

    NONE

    1996-03-01T23:59:59.000Z

    The purpose of this Handbook is to provide contractor training organizations with information that can be used to verify the adequacy of and/or modify existing maintenance training programs, or to develop new training programs. This guide, used in conjunction with facility-specific job analyses, provides a framework for training and qualification programs for maintenance personnel at DOE reactor and nonreactor nuclear facilities. Recommendations for qualification are made in four areas: education, experience, physical attributes, and training. The functional positions of maintenance mechanic, electrician, and instrumentation and control technician are covered by this guide. Sufficient common knowledge and skills were found to include the three disciplines in one guide to good practices. Contents include: qualifications; on-the-job training; trainee evaluation; continuing training; training effectiveness evaluation; and program records. Appendices are included which relate to: administrative training; industrial safety training; fundamentals training; tools and equipment training; facility systems and component knowledge training; facility systems and component skills training; and specialized skills training.

  10. Editorial for Advanced Theory and Practice for High Performance Computing and Communications Geoffrey Fox

    E-Print Network [OSTI]

    Editorial for Advanced Theory and Practice for High Performance Computing and Communications Theory and Practice for High Performance Computing and Communications. I would like to thank Omer Rana International Conference on High Performance Computing and Communications (HPCC-09) http

  11. advanced pharmacy practice: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Joseph G. 7 SPPSIPPESyllabusNovember2013 Introductory Pharmacy Practice Experience Syllabus Biology and Medicine Websites Summary: SPPSIPPESyllabusNovember2013 Introductory...

  12. Advanced Technologies and Practices - Building America Top Innovations...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    in specific technologies and construction practices that improve the building envelope; heating, ventilation, and air conditioning (HVAC); water heating components; and indoor...

  13. advanced practice roles: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Open Access Theses and Dissertations Summary: ??Professional Practice Leadership (PPL) roles were introduced in response to health care professionals concerns about the...

  14. The practical equity implications of advanced metering infrastructure

    SciTech Connect (OSTI)

    Felder, Frank A.

    2010-07-15T23:59:59.000Z

    Reductions in advanced metering costs and the efficiency benefits of dynamic pricing make a compelling case to adopt both, particularly for industrial and commercial facilities. Regulators should seriously consider such policies for residential households as well. Regulators can take meaningful steps to mitigate, if not entirely offset, the possibility that some low-income ratepayers may have higher electricity bills with AM and DP. (author)

  15. Health physics manual of good practices for reducing radiation exposure to levels that are as low as reasonably achievable (ALARA)

    SciTech Connect (OSTI)

    Herrington, W.N.; Higby, D.P.; Kathren,., R.L.; Merwin, S.E.; Stoetzel, G.A.

    1988-06-01T23:59:59.000Z

    A primary objective of the US Department of Energy (DOE) health physics and radiation protection program has been to limit radiation exposures to those levels that are as low as reasonably achievable (ALARA). As a result, the ALARA concept developed into a program and a set of operational principles to ensure that the objective was consistently met. Implementation of these principles required that a guide be produced. The original ALARA guide was issued by DOE in 1980 to promote improved understanding of ALARA concepts within the DOE community and to assist those responsible for operational ALARA activities in attaining their goals. Since 1980, additional guidance has been published by national and international organizations to provide further definition and clarification to ALARA concepts. As basic ALARA experience increased, the value and role of the original guide prompted the DOE Office of Nuclear Safety (ONS) to support a current revision. The revised manual of good practices includes six sections: 1.0 Introduction, 2.0 Administration, 3.0 Optimization, 4.0 Setting and Evaluating ALARA Goals, 5.0 Radiological Design, and 6.0 Conduct of Operations. The manual is directed primarily to contractor and DOE staff who are responsible for conduct and overview of radiation protection and ALARA programs at DOE facilities. The intent is to provide sufficient guidance such that the manual, if followed, will ensure that radiation exposures are maintained as low as reasonably achievable and will establish the basis for a formally structured and auditable program. 118 refs., 16 figs., 3 tabs.

  16. 9 Principles of Good Practice for Assessing Student Learning 1. The assessment of student learning begins with educational values. Assessment is not an end

    E-Print Network [OSTI]

    9 Principles of Good Practice for Assessing Student Learning 1. The assessment of student learning and accurate picture of learning, and therefore firmer bases for improving our students' educational experience and learned. Clear, shared, implementable goals are the cornerstone for assessment that is focused and useful

  17. Cost-effective facility disposition planning with safety and health lessons learned and good practices from the Oak Ridge Decontamination and Decommissioning Program

    SciTech Connect (OSTI)

    NONE

    1998-05-01T23:59:59.000Z

    An emphasis on transition and safe disposition of DOE excess facilities has brought about significant challenges to managing worker, public, and environmental risks. The transition and disposition activities involve a diverse range of hazardous facilities that are old, poorly maintained, and contain radioactive and hazardous substances, the extent of which may be unknown. In addition, many excess facilities do not have historical facility documents such as operating records, plant and instrumentation diagrams, and incident records. The purpose of this report is to present an overview of the Oak Ridge Decontamination and Decommissioning (D and D) Program, its safety performance, and associated safety and health lessons learned and good practices. Illustrative examples of these lessons learned and good practices are also provided. The primary focus of this report is on the safety and health activities and implications associated with the planning phase of Oak Ridge facility disposition projects. Section 1.0 of this report provides the background and purpose of the report. Section 2.0 presents an overview of the facility disposition activities from which the lessons learned and good practices discussed in Section 3.0 were derived.

  18. Advanced Energy Retrofit Guide: Practical Ways to Improve Energy Performance, K-12 Schools (Book)

    SciTech Connect (OSTI)

    Not Available

    2013-02-01T23:59:59.000Z

    The U.S. Department of Energy developed the K-12 Advanced Energy Retrofit Guide to provide specific methodologies, information, and guidance to help energy managers and other stakeholders plan and execute energy efficiency improvements. We emphasize actionable information, practical methodologies, diverse case studies, and unbiased evaluation of the most promising retrofit measure for each building type. K-12 schools were selected as one of the highest priority building sectors, because schools affect the lives of most Americans. They also represent approximately 8% of the energy use and 10% of the floor area in commercial buildings.

  19. Advanced Energy Retrofit Guide: Practical Ways to Improve Energy Performance; Grocery Stores (Revised) (Book)

    SciTech Connect (OSTI)

    Hendron, B.

    2013-07-01T23:59:59.000Z

    The U.S. Department of Energy developed the Advanced Energy Retrofit Guides (AERGs) to provide specific methodologies, information, and guidance to help energy managers and other stakeholders successfully plan and execute energy efficiency improvements. Detailed technical discussion is fairly limited in these guides. Instead, we emphasize actionable information, practical methodologies, diverse case studies, and unbiased evaluations of the most promising retrofit measures for each building type. A series of AERGs is under development, addressing key segments of the commercial building stock. Grocery stores were selected as one of the highest priority sectors, because they represent one of the most energy-intensive market segments.

  20. Advancing Health Practice and Policy through Collaborative Research 1 Annual Report 2011 www.ihrp.uic.edu

    E-Print Network [OSTI]

    Illinois at Chicago, University of

    and health care practices to ensure the most effective strategies for achieving the U.S. Healthy People 2020 the population of Atlanta, Ga. -- and accounts for $97 billion in health care expenditures. Worldwide, tobaccoAdvancing Health Practice and Policy through Collaborative Research 1 Annual Report 2011 www

  1. SPPS 434_Hospital / Health-System_October 3, 2013 1 Hospital / Health-System Advanced Pharmacy Practice Experience

    E-Print Network [OSTI]

    Gleeson, Joseph G.

    in the preparation of parenteral medications, drug distribution, practice management-related activities as well://pharmacy.ucsd.edu/current/policies.shtml.) II. Prerequisites A. Students must have successfully completed years 1-3. B. Students must be in good Practice Experience SPPS 434 Office of Experiential Education James Colbert, Pharm.D. Farivar Jahansouz

  2. Advanced Energy Retrofit Guide (AERG): Practical Ways to Improve Energy Performance; Healthcare Facilities (Book)

    SciTech Connect (OSTI)

    Hendron, R.; Leach, M.; Bonnema, E.; Shekhar, D.; Pless, S.

    2013-09-01T23:59:59.000Z

    The Advanced Energy Retrofit Guide for Healthcare Facilities is part of a series of retrofit guides commissioned by the U.S. Department of Energy. By presenting general project planning guidance as well as detailed descriptions and financial payback metrics for the most important and relevant energy efficiency measures (EEMs), the guides provide a practical roadmap for effectively planning and implementing performance improvements in existing buildings. The Advanced Energy Retrofit Guides (AERGs) are intended to address key segments of the U.S. commercial building stock: retail stores, office buildings, K-12 schools, grocery stores, and healthcare facilities. The guides' general project planning considerations are applicable nationwide; the energy and cost savings estimates for recommended EEMs were developed based on energy simulations and cost estimates for an example hospital tailored to five distinct climate regions. These results can be extrapolated to other U.S. climate zones. Analysis is presented for individual EEMs, and for packages of recommended EEMs for two project types: existing building commissioning projects that apply low-cost and no-cost measures, and whole-building retrofits involving more capital-intensive measures.

  3. Advanced Energy Retrofit Guide: Practical Ways to Improve Energy Performance, K-12 Schools (Book)

    SciTech Connect (OSTI)

    Not Available

    2013-12-01T23:59:59.000Z

    The U.S. Department of Energy developed the Advanced Energy Retrofit Guides (AERGs) to provide specific methodologies, information, and guidance to help energy managers and other stakeholders plan and execute energy efficiency improvements. Detailed technical discussion is fairly limited. Instead, we emphasize actionable information, practical methodologies, diverse case studies, and unbiased evaluations of the most promising retrofit energy efficiency measures for each building type. A series of AERGs is under development, addressing key segments of the commercial building stock. K-12 schools were selected as one of the highest priority building sectors, because schools affect the lives of most Americans. They also represent approximately 8% of the energy use and 10% of the floor area in commercial buildings nationwide. U.S. K-12 school districts spend more than $8 billion each year on energy - more than they spend on computers and textbooks combined. Most occupy older buildings that often have poor operational performance - more than 30% of schools were built before 1960. The average age of a school is about 42 years - which is nearly the expected serviceable lifespan of the building. K-12 schools offer unique opportunities for deep, cost-effective energy efficiency improvements, and this guide provides convenient and practical guidance for exploiting these opportunities in the context of public, private, and parochial schools.

  4. As corn-based biofuels reach their practical limits, advanced algae-based biofuels are poised to supply

    E-Print Network [OSTI]

    Reisslein, Martin

    SEMTE abstract As corn-based biofuels reach their practical limits, advanced algae-based biofuels of Energy, General Electric, Algenol Biofuels, and Southern Company. Currently a post-doctoral fellow working for Algenol Biofuels, Dr. Lively is expanding his expertise in gas and liquid separations

  5. Good Research in Network Theory

    E-Print Network [OSTI]

    Chiang, Mung

    Good Research in Network Theory Mung Chiang Princeton University IEEE INFOCOM 2010 Panel #12;There's no Shortage of Answers already · "There's nothing more practical than good theory" · "A good theory is like a good joke" · "Good theory makes a difference: PageRank, CDMA, Dynamic alternate routing, Aloha, Packet

  6. Code of Good Scientific Practice

    E-Print Network [OSTI]

    Pompeu Fabra, Universitat

    www.imim.es Dept. of Experimental and Health Sciences of the UPF www.upf.edu/cexs Centre for Genomic on Environmental Epidemiology www.creal.cat Institute of Evolutionary Biology www.ibe.upf-csic.es Pasqual Maragall (IMIM), the Department of Experimental and Health Sciences of the Pompeu Fabra University (CEXS-UPF

  7. Sandia National Laboratories Advanced Simulation and Computing (ASC) software quality plan : ASC software quality engineering practices Version 3.0.

    SciTech Connect (OSTI)

    Turgeon, Jennifer L.; Minana, Molly A.; Hackney, Patricia; Pilch, Martin M.

    2009-01-01T23:59:59.000Z

    The purpose of the Sandia National Laboratories (SNL) Advanced Simulation and Computing (ASC) Software Quality Plan is to clearly identify the practices that are the basis for continually improving the quality of ASC software products. Quality is defined in the US Department of Energy/National Nuclear Security Agency (DOE/NNSA) Quality Criteria, Revision 10 (QC-1) as 'conformance to customer requirements and expectations'. This quality plan defines the SNL ASC Program software quality engineering (SQE) practices and provides a mapping of these practices to the SNL Corporate Process Requirement (CPR) 001.3.6; 'Corporate Software Engineering Excellence'. This plan also identifies ASC management's and the software project teams responsibilities in implementing the software quality practices and in assessing progress towards achieving their software quality goals. This SNL ASC Software Quality Plan establishes the signatories commitments to improving software products by applying cost-effective SQE practices. This plan enumerates the SQE practices that comprise the development of SNL ASC's software products and explains the project teams opportunities for tailoring and implementing the practices.

  8. Standard practice for radiographic examination of advanced aero and turbine materials and components

    E-Print Network [OSTI]

    American Society for Testing and Materials. Philadelphia

    2009-01-01T23:59:59.000Z

    1.1 This practice establishes the minimum requirements for radiographic examination of metallic and nonmetallic materials and components used in designated applications such as gas turbine engines and flight structures. 1.2 The requirements in this practice are intended to control the radiographic process to ensure the quality of radiographic images produced for use in designated applications such as gas turbine engines and flight structures; this practice is not intended to establish acceptance criteria for material or components. When examination is performed in accordance with this practice, engineering drawings, specifications or other applicable documents shall indicate the acceptance criteria. 1.3 All areas of this practice may be open to agreement between the cognizant engineering organization and the supplier, or specific direction from the cognizant engineering organization. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the respons...

  9. Project Summary Advances in video technology are being incorporated into today's healthcare practice. For example,

    E-Print Network [OSTI]

    Oh, JungHwan

    Project Summary Advances in video technology are being incorporated into today's healthcare a large body of knowledge in medical image analysis, video data generated during these procedures, analyze, and provide user-friendly and efficient access to the medical, scientific, or educational content

  10. Advanced engineering design as practiced today from the view point of the CERN Industrial Liaison Officer

    E-Print Network [OSTI]

    Barone, Michele

    2012-01-01T23:59:59.000Z

    After an introduction about CERN, a brief description of the Large Hadron Collider(LHC) it is reviewed. Pros and cons of a few advanced engineering design cases are taken in consideration together with the involvement of the European Industry. The conclusion is that the LHC project has been an important driving force for Innovation in European Industry.

  11. Advancing the theory and practice of impact assessment: Setting the research agenda

    SciTech Connect (OSTI)

    Pope, Jenny, E-mail: jenny@integral-sustainability.net [Integral Sustainability, PO Box 79, South Fremantle WA 6162 (Australia) [Integral Sustainability, PO Box 79, South Fremantle WA 6162 (Australia); School of Geo and Spatial Sciences, North-West University, Potchefstroom Campus, Private Bag X6001, Potchefstroom 2520 (South Africa); Curtin University Sustainability Policy Institute, GPO Box U1987, Perth WA 6845 (Australia); Bond, Alan, E-mail: alan.bond@uea.ac.uk [School of Geo and Spatial Sciences, North-West University, Potchefstroom Campus, Private Bag X6001, Potchefstroom 2520 (South Africa) [School of Geo and Spatial Sciences, North-West University, Potchefstroom Campus, Private Bag X6001, Potchefstroom 2520 (South Africa); School of Environmental Sciences, University of East Anglia, Norwich Research Park, Norwich, Norfolk NR4 7TJ (United Kingdom); Morrison-Saunders, Angus, E-mail: a.morrison-saunders@murdoch.edu.au [Integral Sustainability, PO Box 79, South Fremantle WA 6162 (Australia) [Integral Sustainability, PO Box 79, South Fremantle WA 6162 (Australia); School of Geo and Spatial Sciences, North-West University, Potchefstroom Campus, Private Bag X6001, Potchefstroom 2520 (South Africa); School of Environmental Science, Murdoch University, South St, Murdoch WA 6150 (Australia); Retief, Francois, E-mail: francois.retief@nwu.ac.za [School of Geo and Spatial Sciences, North-West University, Potchefstroom Campus, Private Bag X6001, Potchefstroom 2520 (South Africa)] [School of Geo and Spatial Sciences, North-West University, Potchefstroom Campus, Private Bag X6001, Potchefstroom 2520 (South Africa)

    2013-07-15T23:59:59.000Z

    Impact assessment has been in place for over 40 years and is now practised in some form in all but two of the world's nations. In this paper we reflect on the state of the art of impact assessment theory and practice, focusing on six well-established forms: EIA, SEA, policy assessment, SIA, HIA and sustainability assessment. We note that although the fundamentals of impact assessment have their roots in the US National Environmental Policy Act 1969 (NEPA) each branch of the field is distinct in also drawing on other theoretical and conceptual bases that in turn shape the prevailing discourse in each case, generating increasing degrees of specialisation within each sub-field. Against this backdrop, we consider the strengths and weaknesses of collective impact assessment practice, concluding that although there are substantial strengths, the plethora of specialist branches is generating a somewhat confusing picture and lack of clarity regarding how the pieces of the impact assessment jigsaw puzzle fit together. We use this review to suggest an overarching research agenda that will enable impact assessment to evolve in line with changing expectations for what it should deliver. -- Highlights: ? Strengths, weakness, opportunities and threats for IA are explored in this paper ? EIA, SEA, policy assessment, SIA, HIA and sustainability assessment are reviewed ? Diversity of practice is both a strength and weakness in the current economic climate ? There are opportunities to simplify IA by focusing on common and fundamental elements ? Continued research into theory related to IA effectiveness is also essential.

  12. Sandia National Laboratories Advanced Simulation and Computing (ASC) software quality plan. Part 1: ASC software quality engineering practices, Version 2.0.

    SciTech Connect (OSTI)

    Sturtevant, Judith E.; Heaphy, Robert; Hodges, Ann Louise; Boucheron, Edward A.; Drake, Richard Roy; Minana, Molly A.; Hackney, Patricia; Forsythe, Christi A.; Schofield, Joseph Richard, Jr. (,; .); Pavlakos, Constantine James; Williamson, Charles Michael; Edwards, Harold Carter

    2006-09-01T23:59:59.000Z

    The purpose of the Sandia National Laboratories Advanced Simulation and Computing (ASC) Software Quality Plan is to clearly identify the practices that are the basis for continually improving the quality of ASC software products. The plan defines the ASC program software quality practices and provides mappings of these practices to Sandia Corporate Requirements CPR 1.3.2 and 1.3.6 and to a Department of Energy document, ASCI Software Quality Engineering: Goals, Principles, and Guidelines. This document also identifies ASC management and software project teams responsibilities in implementing the software quality practices and in assessing progress towards achieving their software quality goals.

  13. Sandia National Laboratories Advanced Simulation and Computing (ASC) software quality plan part 2 mappings for the ASC software quality engineering practices, version 2.0.

    SciTech Connect (OSTI)

    Heaphy, Robert; Sturtevant, Judith E.; Hodges, Ann Louise; Boucheron, Edward A.; Drake, Richard Roy; Minana, Molly A.; Hackney, Patricia; Forsythe, Christi A.; Schofield, Joseph Richard, Jr. (,; .); Pavlakos, Constantine James; Williamson, Charles Michael; Edwards, Harold Carter

    2006-09-01T23:59:59.000Z

    The purpose of the Sandia National Laboratories Advanced Simulation and Computing (ASC) Software Quality Plan is to clearly identify the practices that are the basis for continually improving the quality of ASC software products. The plan defines the ASC program software quality practices and provides mappings of these practices to Sandia Corporate Requirements CPR001.3.2 and CPR001.3.6 and to a Department of Energy document, ''ASCI Software Quality Engineering: Goals, Principles, and Guidelines''. This document also identifies ASC management and software project teams' responsibilities in implementing the software quality practices and in assessing progress towards achieving their software quality goals.

  14. Advances

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office511041cloth DocumentationProducts (VAP) VAP7-0973 1BP-14Scripting for Advanced Workflows Jack

  15. A two-day (11-12 April 2011) will discuss recent advances in plant genomics and will be followed by a combining lectures with practical

    E-Print Network [OSTI]

    Gent, Universiteit

    A two-day (11-12 April 2011) will discuss recent advances in plant genomics and will be followed by a combining lectures with practical sessions covering data integration, comparative genomics-gen genome sequencing genome evolution comparative transcriptomics ChIPprofiling regulatorynetworks

  16. Sandia National Laboratories Advanced Simulation and Computing (ASC) software quality plan. Part 1 : ASC software quality engineering practices version 1.0.

    SciTech Connect (OSTI)

    Minana, Molly A.; Sturtevant, Judith E.; Heaphy, Robert; Hodges, Ann Louise; Boucheron, Edward A.; Drake, Richard Roy; Forsythe, Christi A.; Schofield, Joseph Richard, Jr.; Pavlakos, Constantine James; Williamson, Charles Michael; Edwards, Harold Carter

    2005-01-01T23:59:59.000Z

    The purpose of the Sandia National Laboratories (SNL) Advanced Simulation and Computing (ASC) Software Quality Plan is to clearly identify the practices that are the basis for continually improving the quality of ASC software products. Quality is defined in DOE/AL Quality Criteria (QC-1) as conformance to customer requirements and expectations. This quality plan defines the ASC program software quality practices and provides mappings of these practices to the SNL Corporate Process Requirements (CPR 1.3.2 and CPR 1.3.6) and the Department of Energy (DOE) document, ASCI Software Quality Engineering: Goals, Principles, and Guidelines (GP&G). This quality plan identifies ASC management and software project teams' responsibilities for cost-effective software engineering quality practices. The SNL ASC Software Quality Plan establishes the signatories commitment to improving software products by applying cost-effective software engineering quality practices. This document explains the project teams opportunities for tailoring and implementing the practices; enumerates the practices that compose the development of SNL ASC's software products; and includes a sample assessment checklist that was developed based upon the practices in this document.

  17. Report 1: JISC Good APIs Management Report

    E-Print Network [OSTI]

    Rzepa, Henry S.

    Report 1: JISC Good APIs Management Report A review of good practice in the provision of machine) Document Name: good_api_JISC_report_v0.8.doc Notes: Acknowledgements UKOLN is funded by the MLA to all those who gave up time to help with the report. Vital to this work were the people who filled

  18. Some Guidelines on How to Deliver a Good Presentation

    E-Print Network [OSTI]

    Almulhem, Ahmad

    Some Guidelines on How to Deliver a Good Presentation Some Guidelines on How toSome Guidelines on How to Deliver a Good PresentationDeliver a Good Presentation King Fahd University of Petroleum irrelevant slides Review, rework, revise: Give it your best Practice, practice, ..., and practice your talk

  19. KEYNOTE PAPER Principles of good assessment and feedback

    E-Print Network [OSTI]

    Azzopardi, Leif

    KEYNOTE PAPER Principles of good assessment and feedback: Theory and practice David Nicol for the theory and practice of assessment in higher education. It presents 10 principles of good assessment underpinning good assessment practice in higher education. In one paper, I (with a colleague) formulated seven

  20. Contact: Julie Goode, 0114 222 7018, j.k.goode@sheffield.ac.uk Interpersonal Skills for Community Support

    E-Print Network [OSTI]

    Stevenson, Mark

    revision guides, Kirby Lonsdale #12;Contact: Julie Goode, 0114 222 7018, j.k.goode@sheffield.ac.uk Study: · An awareness of good study practice in higher education; · Experience of communicating effectively, in bothContact: Julie Goode, 0114 222 7018, j.k.goode@sheffield.ac.uk Interpersonal Skills for Community

  1. Reality Check: Cheaper Batteries are GOOD for America's Electric...

    Office of Environmental Management (EM)

    electric vehicle manufacturing. The story says that the price of advanced batteries for electric vehicles is rapidly declining. That's true. And it's also very good news, since...

  2. The STICS model to predict nitrate leaching following agricultural practices

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    scaling approach was used to assess the effectiveness of "Good Agricultural Practice" established within of Good Agricultural Practice" and other additional measures, with the objective of reducing water pollution from nitrogen compounds in "Nitrate Vulnerable Zones" (NVZs). Good agricultural practices

  3. Energy Code Compliance and Enforcement Best Practices (Text Version...

    Broader source: Energy.gov (indexed) [DOE]

    Energy Code Compliance and Enforcement Best Practices (Text Version) Energy Code Compliance and Enforcement Best Practices (Text Version) Curtis Framel: Good afternoon, and good...

  4. Business Practices

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office511041clothAdvanced Materials Advanced MaterialsEnergy,EnvelopeJeffersonBusinessPractices Sign In About |

  5. On Low-Complexity Decodable Universally Good Linear Codes

    E-Print Network [OSTI]

    Médard, Muriel

    ] as well as provably good [For65], [For66]. and try to walk an analogous path to address practical codeOn Low-Complexity Decodable Universally Good Linear Codes Todd P. Coleman University of Illinois and construction of low-complexity decoding algorithms. We discuss the properties of `universally good codes

  6. GUIDELINES: KEEPING GOOD

    E-Print Network [OSTI]

    Fainman, Yeshaiahu

    GUIDELINES: KEEPING GOOD RESEARCH LAB NOTEBOOKSUC San Diego's Technology Transfer Office (TTO to university policies and guidelines thereby providing incentives for the generation of new innovations and initials. · Consider the possibility of theft, damage, or loss of logbook and take appropriate measure (e

  7. PRACTICE INTERVIEWS Policies & Procedures

    E-Print Network [OSTI]

    Das, Suman

    for a Staff Practice Interview. Before signing up, we require all students to complete specific steps. Please and confident. Good luck and let's get started! Regards, GT Career Services Student Copy (1) #12;PRACTICE types of interviews as well as interviewers available. Practice as many times as you wish. Staff

  8. ASSESSMENT POLICY and PRACTICE University of Strathclyde

    E-Print Network [OSTI]

    Azzopardi, Leif

    , the bulk of this section is the presentation of Twelve Principles of Good Assessment Practice in relation ASSESSMENT POLICY and PRACTICE Twelve Principles of Good Assessment Practice Assessment practice has been- 1 - ASSESSMENT POLICY and PRACTICE University of Strathclyde Introduction This document presents

  9. Practicing Precision

    E-Print Network [OSTI]

    Supercinski, Danielle

    2007-01-01T23:59:59.000Z

    Piccinni, PIN project leader and assistant professor of crop physiology with the Texas Agricultural Experiment Station at Uvalde. ?While some growers are doing a very good job using limited irrigation strategies, others are overwatering their crops...tx H 2 O | pg. 24 W intergarden and High Plains researchers and county agents worked with 30 growers from various counties to conduct on-farm research demonstrations evaluating the extent to which limited irrigation practices may provide water...

  10. Enhancing practice Quality Enhancement Themes

    E-Print Network [OSTI]

    Azzopardi, Leif

    .sparqs.org.uk) a national programme of Enhancement Themes aimed at developing and sharing good practice to enhance of establishing a programme of development activities, which draw on national and international good practice Scotland #12;Contents Acknowledgements 1 1 Outline and scope 2 2 A guide for readers 3 3 Practical

  11. Theorizing Practice and Practicing Theory

    E-Print Network [OSTI]

    Feldman, Martha S; Orlikowski, Wanda J

    2011-01-01T23:59:59.000Z

    Practice and Practicing Theory Organization Science 22(5),Practice and Practicing Theory Organization Science 22(5),Practice and Practicing Theory Organization Science 22(5),

  12. RCUK Policy and Guidelines on Governance of Good Research February 2013

    E-Print Network [OSTI]

    Berzins, M.

    . In particular this document: Sets standards of good research practice, with associated guidelines Specifies/science/science-and-society/communication-and-engagement/universal-ethical- code; UK Research Integrity Office, Code of practice for research: Promoting good practice Research Projects: A PRACTICAL GUIDE (2009): www.oecd.org/document/13/0,3343,en_2649

  13. MENTOR-BASED EFFORT TO ADVANCE IMPLEMENTATION OF PREFERRED MANAGEMENT PRACTICES (PMPS) FOR OIL PRODUCERS IN SOUTH MIDCONTINENT (OKLAHOMA/ARKANSAS) AND WEST COAST (CALIFORNIA) REGIONS

    SciTech Connect (OSTI)

    Donald F. Duttlinger; E. Lance Cole

    2004-12-01T23:59:59.000Z

    The Petroleum Technology Transfer Council (PTTC) and cooperating Regional Lead Organizations (RLOs) in its South Midcontinent (Oklahoma Geological Survey, Norman, Oklahoma) and West Coast (University of Southern California, Los Angeles, California) regions conducted a ''Mentor-Based Effort to Advance Implementation of Preferred Management Practices (PMPs) For Oil Producers'' (DE-FC26-01BC15272) under an award in Phase I of Department of Energy's (DOE's) PUMP (Preferred Upstream Management Practices) program. The project's objective was to enable producers in California, Oklahoma and Arkansas to increase oil production, moderating or potentially reversing production declines and extending the life of marginal wells in the near term. PTTC identified the primary constraints inhibiting oil production through surveys and PUMPer direct contacts in both regions. The leading common constraint was excess produced water and associated factors. Approaches for addressing this common constraint were tailored for each region. For Oklahoma and Arkansas, the South Midcontinent Region developed a concise manual titled ''Produced Water And Associated Issues'' that led to multiple workshops across the region, plus workshops in several other regions. In California, the West Coast Region leveraged PUMP funding to receive an award from the California Energy Commission for $300,000 to systematically evaluate water control solutions for the California geological environment. Products include still-developing remedial action templates to help producers identify underlying causes of excess water production and screen appropriate solutions. Limited field demonstrations are being implemented to build producer confidence in water control technologies. Minor leverage was also gained by providing technology transfer support to a Global Energy Partners project that demonstrated affordable approaches for reducing power consumption. PTTC leveraged PUMP project results nationally through expanding workshops to other regions, providing coverage in its newsletter, through columns and case studies in trade journals, and through coordinating presentations at association and professional society meetings. Combined, there were more than 800 participants. Applying ''application percentages'' from PTTC's total technology transfer program, more than 250 participants are likely to be applying technologies (39% of industry participants). Polymer gel water-shutoff (WSO) treatments and wellbore management were a focus in the Midcontinent area. A major provider of polymer gel WSO treatments has experienced a significant increase in treatment activity in Oklahoma, some of which can be logically attributed to this project. A provider of polylined tubing, a product related to wellbore management, has noted a 280% increase in their independent customer base and opening of a new market due to their involvement in PUMP-spinoff technology transfer. Detailed case studies on polymer gel WSO treatments and wellbore management, along with more global analyses, demonstrate the economic value of these technologies to producers. Among the many information sources that producers consider when applying technology, PTTC knows it is an important source in these technology areas.

  14. Compile lessons learned and good practices from ongoing and previous...

    Open Energy Info (EERE)

    plans Previous Step Next Step 2.2 Resources on existing programs, studies, and data Best practicelessons learned documents and related programs Center for Climate...

  15. Uranium hexafluoride: A manual of good handling practices. Revision 7

    SciTech Connect (OSTI)

    NONE

    1995-01-01T23:59:59.000Z

    The United States Enrichment Corporation (USEC) is continuing the policy of the US Department of Energy (DOE) and its predecessor agencies in sharing with the nuclear industry their experience in the area of uranium hexafluoride (UF{sub 6}) shipping containers and handling procedures. The USEC has reviewed Revision 6 or ORO-651 and is issuing this new edition to assure that the document includes the most recent information on UF{sub 6} handling procedures and reflects the policies of the USEC. This manual updates the material contained in earlier issues. It covers the essential aspects of UF{sub 6} handling, cylinder filling and emptying, general principles of weighing and sampling, shipping, and the use of protective overpacks. The physical and chemical properties of UF{sub 6} are also described. The procedures and systems described for safe handling of UF{sub 6} presented in this document have been developed and evaluated during more than 40 years of handling vast quantities of UF{sub 6}. With proper consideration for its nuclear properties, UF{sub 6} may be safely handled in essentially the same manner as any other corrosive and/or toxic chemical.

  16. DOE standard guide to good practices for lockouts and tagouts

    SciTech Connect (OSTI)

    Not Available

    1992-11-01T23:59:59.000Z

    A program for lockout/tagout is important for ensuring worker safety in DOE facilities. The program is designed to identify sources of energy and hazardous materials that could adversely affect maintenance activities, isolate all such sources from the work area, and ensure that the isolation remains effective until the work is completed. Purpose of this guide is to provide DOE contractors with information that can be used to validate and/or modify existing programs relative to Conduct of Operations.

  17. Guidance for Industry E6 Good Clinical Practice

    E-Print Network [OSTI]

    Biederman, Irving

    . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 3. INSTITUTIONAL REVIEW BOARD/INDEPENDENT ETHICS COMMITTEE (IRB/IEC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 4.4 Communication with IRB/IEC

  18. DOE Handbook: Guide to good practices evaluation instrument examples

    SciTech Connect (OSTI)

    NONE

    1997-01-01T23:59:59.000Z

    Training evaluation determines a training program`s effectiveness in meeting its intended purpose: producing competent employees. Evaluation is the quality assurance component of a systematic approach to training program. This guide provides information on evaluation instruments used to gather employee, supervisor, and instructor feedback to identify strengths and weaknesses of training programs at DOE facilities. It should be used in conjunction with ``DOE Training Program Handbook: A Systematic Approach to Training`` and ``DOE Handbook, Alternative Systematic Approaches to Training.``

  19. Good Practices for Ocupational Radiological Protection in Plutonium Facilities

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742Energy ChinaofSchaefer To: CongestionDevelopment of a downholeReactorsgoal andLastNetworks |Not

  20. World Bank Good Practice Guidelines: Financial Analysis of Revenue

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to:Ezfeedflag JumpID-fTriWildcat 1 Wind Project JumpWisconsin:World Agroforestry Centre Jump

  1. World Bank Good Practice Guidelines: Financial Analysis of Revenue

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to:Ezfeedflag JumpID-fTriWildcat 1 Wind Project JumpWisconsin:World Agroforestry Centre

  2. Compile lessons learned and good practices from ongoing and previous

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnualProperty EditCalifornia:PowerCER.png ElColumbia, NorthCommunitySouth JumpCompetitive

  3. The Merchant Shipping (Dangerous Goods) Rules 1965 

    E-Print Network [OSTI]

    Noble, Michael; Mason, Roy

    1965-01-01T23:59:59.000Z

    STATUTORY INSTRUMENTS 1965 No. 1067 MERCHANT Shipping DANGEROUS GOODS The Merchant Shipping (Dangerous Goods) Rules 1965

  4. An introduction to the practical and ethical perspectives on the need to advance and standardize the intracoelomic surgical implantation of electronic tags in fish

    SciTech Connect (OSTI)

    Brown, Richard S.; Eppard, M. B.; Murchie, Karen J.; Nielsen, Jennifer L.; Cooke, Steven J.

    2011-01-01T23:59:59.000Z

    The intracoelomic surgical implantation of electronic tags (including radio and acoustic telemetry transmitters, passive integrated transponders and archival biologgers) is frequently used for conducting studies on fish. Electronic tagging studies provide information on the spatial ecology, behavior and survival of fish in marine and freshwater systems. However, any surgical procedure, particularly one where a laparotomy is performed and the coelomic cavity is opened, has the potential to alter the survival, behavior or condition of the animal which can impair welfare and introduce bias. Given that management, regulatory and conservation decisions are based on the assumption that fish implanted with electronic tags have similar fates and behavior relative to untagged conspecifics, it is critical to ensure that best surgical practices are being used. Also, the current lack of standardized surgical procedures and reporting of specific methodological details precludes cross-study and cross-year analyses which would further progress the field of fisheries science. This compilation of papers seeks to identify the best practices for the entire intracoelomic tagging procedure including pre- and post-operative care, anesthesia, wound closure, and use of antibiotics. Although there is a particular focus on salmonid smolts given the large body of literature available on that group, other life-stages and species of fish are discussed where there is sufficient knowledge. Additional papers explore the role of the veterinarian in fish surgeries, the need for minimal standards in the training of fish surgeons, providing a call for more complete and transparent procedures, and identifying trends in procedures and research needs. Collectively, this body of knowledge should help to improve data quality (including comparability and repeatability), enhance management and conservation strategies, and maintain the welfare status of tagged fish.

  5. Computational Fluid Dynamics Evaluation of Good Combustion Performance in Waste Incinerators

    E-Print Network [OSTI]

    Kim, Yong Jung

    -furnace destruction of pollutants are stated as: good combustion is achieved when 2-second gas residence time at 850 C1 Computational Fluid Dynamics Evaluation of Good Combustion Performance in Waste Incinerators waste incinerators, good combustion practices(GCP or GOP) have been established. These operating (and

  6. Enabling data science and good research to inform ZEV policy

    E-Print Network [OSTI]

    California at Davis, University of

    Enabling data science and good research to inform ZEV policy PREPARED BY JAMIE DAVIES ZERO Headquarters, Diamond Bar, CA #12;Data science 101 Data science is the extraction of actionable ­ Longitudinal ­ Can inform if campaigns are working, or point to possible gaps ­ Help practice adaptive

  7. Good Sources of Nutrients: Iron

    E-Print Network [OSTI]

    Scott, Amanda; Replogle, Jacqueline

    2008-08-28T23:59:59.000Z

    ENP-2881 08-08 Good Sources of Nutrients Iron Buenas fuentes de nutrientes Hierro La funci?n del hierro Transporta ox?geno en la sangre para que su ? cuerpo tenga energ?a Facilita crecimiento? Proporciona energ?a que ayuda a los ni?os a ? jugar y...

  8. Mathematical Forecasting Donald I. Good

    E-Print Network [OSTI]

    Boyer, Robert Stephen

    Mathematical Forecasting Donald I. Good Technical Report 47 September 1989 Computational Logic Inc the physical behavior of computer programs can reduce these risks for software engineering in the same way that it does for aerospace and other fields of engineering. Present forecasting capabilities for computer

  9. Switch for Good Community Program

    SciTech Connect (OSTI)

    Crawford, Tabitha; Amran, Martha

    2013-11-19T23:59:59.000Z

    Switch4Good is an energy-savings program that helps residents reduce consumption from behavior changes; it was co-developed by Balfour Beatty Military Housing Management (BB) and WattzOn in Phase I of this grant. The program was offered at 11 Navy bases. Three customer engagement strategies were evaluated, and it was found that Digital Nudges (a combination of monthly consumption statements with frequent messaging via text or email) was most cost-effective.

  10. Good Nutrition is a Treasure.

    E-Print Network [OSTI]

    Mason, Louise; Cox, Maeona; Reasonover, Frances; Tribble, Marie

    1965-01-01T23:59:59.000Z

    intake. Also, the am-t of digesting enzymes decreases gradually i ' the gestive tract so the aging body cannot hndle as well. Need for protein and milk does nat with advancing age. Minerals and vitamins suffer most many older people make... caloric intake and en- output are balanced. Their current way of life limits exercise tite is smdl, make the food to a minimum for many people. To lose a pound of fat, 3500 calories must be ' slOwly and used by the body or eliminated fmm the diet...

  11. Good Energies | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to: navigation, search OpenEI ReferenceJump to: navigation, search EquivalentGonergyGood Energies

  12. Democratic Institutions and Provision of Public Good

    E-Print Network [OSTI]

    Saha, Sarani

    2007-01-01T23:59:59.000Z

    2003. [3] R. T. Deacon and S. Saha. Public Good Provision byof a Public Good Sarani Saha PhD Candidate Donald Brenof a Public Good Sarani Saha PhD Candidate Donald Bren

  13. A Structured Framework for Assessing the "Goodness" of Agile Methods

    E-Print Network [OSTI]

    Soundararajan, Shvetha

    2010-01-01T23:59:59.000Z

    Agile Methods are designed for customization; they offer an organization or a team the flexibility to adopt a set of principles and practices based on their culture and values. While that flexibility is consistent with the agile philosophy, it can lead to the adoption of principles and practices that can be sub-optimal relative to the desired objectives. We question then, how can one determine if adopted practices are "in sync" with the identified principles, and to what extent those principles support organizational objectives? In this research, we focus on assessing the "goodness" of an agile method adopted by an organization based on (1) its adequacy, (2) the capability of the organization to provide the supporting environment to competently implement the method, and (3) its effectiveness. To guide our assessment, we propose the Objectives, Principles and Practices (OPP) framework. The design of the OPP framework revolves around the identification of the agile objectives, principles that support the achiev...

  14. ECU Physicians Group Practice Policy and Procedure Manual

    E-Print Network [OSTI]

    ECU Physicians Group Practice Policy and Procedure Manual Topic: Advance Care Planning - #C31 Planning practices. IV. Procedure: A. The Social Work and Case Management Department will insure Group Practice Policy and Procedure Manual Topic: Advance Care Planning - #C31 Section No. 2 Section

  15. Human Factors Aspects of Advanced Process Control

    E-Print Network [OSTI]

    Shaw, J. A.

    HUMAN FACTORS ASPECTS OF ADVANCED PRO?CESS CONTROL John A. Shaw Combustion Engineering Taylor Instrument Division Rochester, New York ABSTRACT Energy conservation practices, such as heat recovery and integration, require that many... chemical and related processes use advanced control systems. Many of the more advanced process control strategies and algorithms can cause operator confusion, leading to incorrect operator actions and negating the advantages of the advanced control...

  16. Lung Transplantation for Advanced Bronchiectasis

    E-Print Network [OSTI]

    Turner, Monica G.

    Lung Transplantation for Advanced Bronchiectasis Don Hayes Jr., M.D., F.A.A.P., F.A.C.P., F.C.C.P.1 and Keith C. Meyer, M.D., M.S., F.A.C.P., F.C.C.P.2 ABSTRACT Lung transplant (LT) can be successfully performed on patients with advanced bronchiectatic lung disease with subsequent good posttransplant quality

  17. Theorizing Practice and Practicing Theory

    E-Print Network [OSTI]

    Feldman, Martha S.

    his paper describes the emerging field of practice theory as it is practiced in relation to organizational phenomena. We identify three approaches—empirical, theoretical, and philosophical—that relate to the what, the how, ...

  18. Westinghouse advanced particle filter system

    SciTech Connect (OSTI)

    Lippert, T.E.; Bruck, G.J.; Sanjana, Z.N.; Newby, R.A.

    1995-11-01T23:59:59.000Z

    Integrated Gasification Combined Cycles (IGCC), Pressurized Fluidized Bed Combustion (PFBC) and Advanced PFBC (APFB) are being developed and demonstrated for commercial power generation application. Hot gas particulate filters are key components for the successful implementation of IGCC, PFBC and APFB in power generation gas turbine cycles. The objective of this work is to develop and qualify through analysis and testing a practical hot gas ceramic barrier filter system that meets the performance and operational requirements of these advanced, solid fuel power generation cycles.

  19. Sandia National Laboratories: Helping Advance the Scientific...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Major Efficiency Improvements The goal of our SSLS EFRC is not to work on advancing SSL technology itself; that is something that industry is extremely good at. Our goal...

  20. 5.33 Advanced Chemical Experimentation and Instrumentation, Fall 2005

    E-Print Network [OSTI]

    Gheorghiu, Mircea D.

    Advanced experimentation, with particular emphasis on chemical synthesis and the fundamentals of quantum chemistry illustrated through molecular spectroscopy. Instruction and practice in the written and oral presentation ...

  1. advance public health: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Public Health Conference Advancing Environmental Public Health Science Practice in New Frontiers Environmental Sciences and Ecology Websites Summary: to be back here with the...

  2. 5.33 Advanced Chemical Experimentation and Instrumentation, Fall 2002

    E-Print Network [OSTI]

    Gheorghiu, Mircea D.

    Advanced experimentation, with particular emphasis on chemical synthesis and the fundamentals of quantum chemistry illustrated through molecular spectroscopy. Instruction and practice in the written and oral presentation ...

  3. International Monetary Policy Analysis with Durable Goods 

    E-Print Network [OSTI]

    Lee, Kang Koo

    2010-10-12T23:59:59.000Z

    The dissertation studies a model of an economy which produces and exports durable goods. It analyzes the optimal monetary policy for such a country. Generally, monetary policy has a bigger economic effect on durable goods ...

  4. Durable Goods, Price Indexes, and Monetary Policy

    E-Print Network [OSTI]

    Han, Kyoung Soo

    2009-05-15T23:59:59.000Z

    The dissertation studies the relationship among durable goods, price indexes and monetary policy in two sticky-price models with durable goods. One is a one-sector model with only durable goods and the other is a two-sector model with durable...

  5. Movements of Dangerous Goods Across the Credit

    E-Print Network [OSTI]

    Haykin, Simon

    Movements of Dangerous Goods Across the Credit Valley Conservation Watershed Prepared for: Credit understanding of the movement of dangerous goods across the Credit River watershed. It is intended to assist CVCMaster University Hamilton, Ontario September 2011 mitl.mcmaster.ca #12;Dangerous Goods and the Credit Valley

  6. Climate and Institutional Change ADVANCE efforts to improve

    E-Print Network [OSTI]

    Sheridan, Jennifer

    #12;Climate and Institutional Change ADVANCE efforts to improve departmental climate #12;Why Climate? Recruitment--women more likely to come to a department with good climate Retention--women faculty more likely to stay in a department with good climate Advancement--women more likely to be promoted

  7. Planet Hunters and Seafloor Explorers: Legitimate Peripheral Participation Through Practice Proxies in Online Citizen Science

    E-Print Network [OSTI]

    Crowston, Kevin

    contextualized and specific characteristics of primary work practice. Author Keywords Guides; instructions; ACM knowledge about work practices needed for good performance. Such tacit knowledge can be conveyed insteadPlanet Hunters and Seafloor Explorers: Legitimate Peripheral Participation Through Practice Proxies

  8. Advanced Quantitative Methodology PSC 702, Spring 2013

    E-Print Network [OSTI]

    Ahmad, Sajjad

    : the regression analysis. We will investigate the usefulness of the tool as well as its statistical and practical. For students who have turned their assignment in on time and completed in good faith, corrected homework may of others. Most of us "know" that studying hard makes it more likely that we will get good grades. But how

  9. Advanced thermochemical hydrogen cycles

    SciTech Connect (OSTI)

    Hollabaugh, C.M.; Bowman, M.G.

    1981-01-01T23:59:59.000Z

    The overall objective of this program is to contribute to the development of practical thermochemical cycles for the production of hydrogen from water. Specific goals are: investigate and evaluate the technical and economic viability of thermochemical cycles as an advanced technology for producing hydrogen from water; investigate and evaluate the engineering principles involved in interfacing individual thermochemical cycles with the different thermal energy sources (high temperature fission, solar, and fusion); and conduct a continuing research and development effort to evaluate the use of solid sulfates, oxides and other compounds as potentially advanced cycles and as alternates to H/sub 2/SO/sub 4/ based cycles. Basic thermochemistry studies have been completed for two different steps in the decomposition of bismuth sulfate. Two different bismuth sulfate cycles have been defined for different sulfuric acid strengths. The eventual best cycle will depend on energy required to form sulfuric acid at different concentrations. A solids decomposition facility has been constructed and practical studies of solid decompositions are being conducted. The facility includes a rotary kiln system and a dual-particle fluidized bed system. Evaluation of different types of cycles for coupling with different heat sources is continuing.

  10. Advanced Combustion

    SciTech Connect (OSTI)

    Holcomb, Gordon R. [NETL

    2013-03-11T23:59:59.000Z

    The activity reported in this presentation is to provide the mechanical and physical property information needed to allow rational design, development and/or choice of alloys, manufacturing approaches, and environmental exposure and component life models to enable oxy-fuel combustion boilers to operate at Ultra-Supercritical (up to 650{degrees}C & between 22-30 MPa) and/or Advanced Ultra-Supercritical conditions (760{degrees}C & 35 MPa).

  11. Good for the Community, Good for the Globe | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    the Globe Good for the Community, Good for the Globe May 7, 2012 - 10:58am Addthis Lynn Meyer Presidential Management Fellow, Office of Energy Efficiency and Renewable Energy April...

  12. Advanced control documentation for operators

    SciTech Connect (OSTI)

    Ayral, T.E. (Mobil Oil, Torrance, CA (US)); Conley, R.C. (Profimatics, Inc., Thousand Oaks, CA (US)); England, J.; Antis, K. (Ashland Oil, Ashland, KY (US))

    1988-09-01T23:59:59.000Z

    Advanced controls were implemented on Ashland Oil's Reduced Crude Conversion (RCC) and Metals Removal System (MRS) units, the RCC and MRS main fractionators and the unit gas plant. This article describes the format used for the operator documentation at Ashland. Also, a potential process unit problem is described which can be solved by good operator documentation. The situation presented in the paper is hypothetical, however,the type of unit upset described an occur if proper precautions are not taken.

  13. University Farmers Market Rules The Rice University Farmers Market (RUFM) supports activities, goods, and services that promote community

    E-Print Network [OSTI]

    The Rice University Farmers Market (RUFM) supports activities, goods, and services but it is the law (see Deceptive Trade Practices). Farm items produced by other local growers, or conventional) for each product. Agricultural & Nursery ­ fruits, vegetables, herbs

  14. Good Sources of Nutrients: Vitamin B-12

    E-Print Network [OSTI]

    Scott, Amanda; Replogle, Jacqueline

    2008-08-28T23:59:59.000Z

    to retain vitamin B-12. It also lists foods that are good sources of vitamin B-12. (2 pp., 2 charts, 1 illustration). This publication is available to ALL AGENTS....

  15. Choosing transportation alternatives for highly perishable goods

    E-Print Network [OSTI]

    Bourassa, P. Louis (Pierre Louis)

    2006-01-01T23:59:59.000Z

    The selection of a transportation alternative to ship perishable goods is dependent on several interconnected factors, the most important usually being speed of delivery. This study focuses on the distribution operation ...

  16. Going To Work: Make a Good Impression

    E-Print Network [OSTI]

    Hoffman, Rosemarie

    2000-01-07T23:59:59.000Z

    Edited by Rosemarie Hoffman Assistant Professor and Extension Individual and Family Development Specialist, The Texas A&M University System L-2364 12-99 Make a Good Impression Y our goals, self-image, personality, attitude, cleanliness and concern...

  17. A note on three dimensional good sets

    E-Print Network [OSTI]

    K. Gowri Navada

    2008-02-26T23:59:59.000Z

    We show that as in the case of n- fold Cartesian product for n greater than or equal to 4, even in 3-fold Cartesian product, a related component of a good set need not be a full component.

  18. International Monetary Policy Analysis with Durable Goods

    E-Print Network [OSTI]

    Lee, Kang Koo

    2010-10-12T23:59:59.000Z

    INTERNATIONAL MONETARY POLICY ANALYSIS WITH DURABLE GOODS A Dissertation by KANG KOO LEE Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment of the requirements for the degree... of DOCTOR OF PHILOSOPHY August 2009 Major Subject: Economics INTERNATIONAL MONETARY POLICY ANALYSIS WITH DURABLE GOODS A Dissertation by KANG KOO LEE Submitted to the Office of Graduate Studies of Texas A&M University...

  19. Charting Collaborative Practices: Acknowledgements

    E-Print Network [OSTI]

    Belanger, Alisa; Crumly, Allison

    2009-01-01T23:59:59.000Z

    Collaborative Practices: Acknowledgements Each issue ofCollaborative Practices: Acknowledgements Alisa Belanger and

  20. Advanced Combustion

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office511041cloth DocumentationProducts (VAP) VAP7-0973 1BP-14 Power and TransmissionAdolphusAdvanced Energy

  1. Advocate Good Samaritan Hospital Advocate Good Samaritan Hospital, an acute-care medical facility

    E-Print Network [OSTI]

    Magee, Joseph W.

    Improvement recognized it as an international best practice. ·Using Failure Mode and Effects Analysis (FMEA

  2. Bringing IDEAs into Practice: Optimization in a Minimally Invasive

    E-Print Network [OSTI]

    Utrecht, Universiteit

    in practice because of their general applicability and good performance on com- plicated real­world problemsBringing IDEAs into Practice: Optimization in a Minimally Invasive Vascular Intervention Simulation university technical report UU-CS-2004-049 www.cs.uu.nl #12;Bringing IDEAs into Practice: Optimization

  3. Good Energies (Switzerland) | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to: navigation, search OpenEI ReferenceJump to: navigation, search EquivalentGonergy JumpGoodGood

  4. Versioning Information Goods Hal R. Varian

    E-Print Network [OSTI]

    Varian, Hal R.

    , and small variable costs of reproduction. Cost-based pricing makes little sense in this context; value Introduction One prominent feature of information goods is that they have large fixed costs of production-based pricing is much more appropriate. Different consumers may have radically different values for a particular

  5. Versioning Information Goods Hal R. Varian #

    E-Print Network [OSTI]

    Varian, Hal R.

    , and small variable costs of reproduction. Cost­based pricing makes little sense in this context; value Introduction One prominent feature of information goods is that they have large fixed costs of production­based pricing is much more appropriate. Different consumers may have radically different values for a particular

  6. Pricing Information Goods Hal R. Varian

    E-Print Network [OSTI]

    Varian, Hal R.

    on prices except the $1 a copy reproduction costs. Since this price is likely inadequate to recover fixed different prices. As we will see below, this will be true even for a producer who is only interested in costPricing Information Goods by Hal R. Varian University of Michigan June 1995 Current version: June

  7. Good Sources of Nutrients: Vitamin A

    E-Print Network [OSTI]

    Scott, Amanda; Replogle, Jacqueline

    2008-08-28T23:59:59.000Z

    ENP-2888 08-08 Good Sources of Nutrients Vitamin A Buenas fuentes de nutrientes Vitamina A Vitamin A at work Helps improve vision, especially at night? Helps babies grow and develop during ? pregnancy Protects you from infections? Is a source...

  8. Reflections "Welcome back! Have a good

    E-Print Network [OSTI]

    Reflections "Welcome back! Have a good vacation"? "I wasn't on vacation. I was in the field." "I in a dig at the granting agency that spent nearly $1,750 in support of your research. A basic stock of fine, they will sprint to their typewriters and set their two forefingers to banging out near poetry in praise of basic

  9. ITP Metal Casting: Theoretical/Best Practice Energy Use in Metalcastin...

    Broader source: Energy.gov (indexed) [DOE]

    TheoreticalBest Practice Energy Use In Metalcasting Operations J. F. Schifo J.T. Radia KERAMIDA Environmental, Inc. Indianapolis, IN May 2004 Prepared under Contract to Advanced...

  10. DOE-STD-1041-93 CN-1; Guide to Good Practices for Shift Routines and Operating Practices

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny:Revised Finding of No Significant Impact610-94 December8-964-93 March0-93 June

  11. Official Doctor of Nursing Practice Program of Study Form

    E-Print Network [OSTI]

    Hutcheon, James M.

    Clinical Immersion Project 2: Implementation NURS 9923 Clinical Immersion Project 3: Outcomes NURS 9131 Biometrics for Advanced Practice Nursing NURS 9133 Clinical Scholarship and Policy Development NURS 9135 Outcomes Management Strategies for Improved Health Care Outcomes

  12. ADVANCED BUSINESS CERTIFICATE (ABC) HEALTH CARE FINANCE AND INSURANCE

    E-Print Network [OSTI]

    Alpay, S. Pamir

    Management (HSMG 5686) Global Healthcare Systems (HSMG 5687) Risk Management and Quality Across Borders (HSMG Management & Insurance Studies offers an Advanced Business Certificate for business professionals who, hospitals, health plans, pharmaceutical companies, long-term care facilities, physician practice management

  13. Geothermal: Advanced Search

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Advanced Search Geothermal Technologies Legacy Collection HelpFAQ | Site Map | Contact Us HomeBasic Search About Publications Advanced Search New Hot Docs News Related Links You...

  14. Essays on the provision of public goods

    E-Print Network [OSTI]

    Cha, Inkyung

    2004-09-30T23:59:59.000Z

    - cludability property leads to a free rider problem and causes an underprovision of privately produced public goods. This led some authors to consider the possibility that the government could redistribute income to get an e?cient outcome if the gov- ernment..., the discount factor, ?H = 1/(1 + r),wherer is the interest rate, equals one, because they never cheat their donors, meaning ?H =0. When the low-type charity spends some donations on perks, that fact is observed by an audit with probability ?L > 0, and therefore...

  15. Good Company Associates Inc | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to: navigation, search OpenEI ReferenceJump to: navigation, search EquivalentGonergy Jump to:Good

  16. Good Energies (New York) | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to: navigation, search OpenEI ReferenceJump to: navigation, search EquivalentGonergy JumpGood

  17. Conservation is good, preservation is better

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625govInstrumentstdmadapInactiveVisiting theCommercialization andComputerConfirmed:Conservation is good, preservation

  18. FEMA Good Ideas Book | Department of Energy

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 1112011 Strategic Plan| Department of Energy 088:EnergyFAR27.pdfFE DOCKETFEDERALFEMA Good

  19. Good Energies (Washington DC) | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are8COaBulkTransmissionSitingProcess.pdfGetec AG Contracting Jump to:Echo,GEFLakes,Goliad County,Good Energies

  20. Suzhou Good Ark Electronics | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnualProperty Edit with formSoutheastern ILSunseeker Energy HoldingEnergyLand-useSustainxSuzhou Good

  1. Real Goods Solar Ukiah | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghuraji Agro Industries Pvt Ltd Jump to: navigation, searchRay County, Missouri:ReSunReal Goods SolarReal

  2. accounting practice education: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Lynch School of Education: Zane, Robin Lee 2012-01-01 3 on education of Good Practice Energy Storage, Conversion and Utilization Websites Summary: the forum Abroad on education...

  3. Rules to Ensure Good Scientific Practice at DESY Procedures in Case of Scientific Misconduct

    E-Print Network [OSTI]

    (in italics) and are discussed and provided with DESY- specific details as needed (indented, normal to the publication guidelines in the rules of procedure, insofar as DESY employees participate as authors and thus

  4. DOE handbook: Guide to good practices for training and qualification of chemical operators

    SciTech Connect (OSTI)

    NONE

    1996-03-01T23:59:59.000Z

    The purpose of this Handbook is to provide contractor training organizations with information that can be used as a reference to refine existing chemical operator training programs, or develop new training programs where no program exists. This guide, used in conjunction with facility-specific job analyses, will provide a framework for training and qualification programs for chemical operators at DOE reactor and nonreactor facilities. Recommendations for qualification are made in four areas: education, experience, physical attributes, and training. Contents include: initial qualification; administrative training; industrial safety training; specialized skills training; on-the-job training; trainee evaluation; continuing training; training effectiveness evaluation; and program records. Two appendices describe Fundamentals training and Process operations. This handbook covers chemical operators in transportation of fuels and wastes, spent fuel receiving and storage, fuel disassembly, fuel reprocessing, and both liquid and solid low-level waste processing.

  5. ALARA Center of Technology promotes good radiological work practices at Hanford

    SciTech Connect (OSTI)

    Waggoner, L.O., Westinghouse Hanford, Richland, WA

    1997-10-31T23:59:59.000Z

    The central Radiological Control Organization, originally under the previous Management and Operations contractor (Westinghouse Hanford Company) decided that a significant improvement in ALARA implementation would result if examples of engineered controls used for radiological work were assembled in one location to provide a ``showcase`` for workers and managers. The facility would be named the ALARA Center of Technology (ACT) and would include the latest technologies used to accomplish radiological work, as well as proven techniques, tools, and equipment. A location for the Center was selected in the 200 East Area of Hanford in a central location to be easily accessible to all facilities and contractors. Since there was little money available for this project, a decision was made to contact several vendors and request loans of their tools, equipment, and materials. In return, the center would help market products on site and assist with product demonstrations when the vendors visited Hanford. Out of 28 vendors originally contacted, 16 responded with offers to loan products. This included a containment tent, several glove bags, BEPA filtered vacuum cleaners, portable ventilation systems, fixatives, temporary shielding, pumps, and several special tools. Vendors who could not provide products sent videos and brochures. Westinghouse Hanford Company began using the ACT in June 1996. Fluor Daniel Hanford, Inc., the present Management and Integrating Contractor for the Hanford Site, held the formal opening ceremony of the ALARA Center of Technology on October 1, 1996. The Center now has about 1200 ft{sup 2} of floor space fi Iled with tools, equipment and material used to perform radiological work.

  6. Uranium hexafluoride: A manual of good practice ORO 651 revision 6

    SciTech Connect (OSTI)

    Dyer, R.H. [Department of Energy, Oak Ridge, TN (United States)

    1991-12-31T23:59:59.000Z

    The United States Department of Energy publishes a document containing UF{sub 6} handling procedures and descriptions of the approved UF{sub 6} cylinders. Since its initial publication in 1966, it has been frequently revised to provide more and better information. The principle additions to the sixth revision which will be discussed are: (1) more detail on the physical and chemical properties of UF{sub 6}; (2) cold trap description and operation; (3) cylinder emptying and filling concepts; (4) basis for cylinder fill limits; (5) short- and long-term cylinder storage; and (6) cylinder photographs and drawings showing major dimensions.

  7. Guide to good practices for teamwork training and diagnostic skills development

    SciTech Connect (OSTI)

    NONE

    1997-06-01T23:59:59.000Z

    This guide provides assistance in the development, implementation, and improvement of training on teamwork and diagnostics. DOE and contractor representatives identified the need for teamwork and diagnostics training guidance. This need was based on the increasing emphasis of properly applying knowledge and skills to complete assigned tasks. Teamwork and diagnostic skills have become a focal point because of the impact they have on effective facility operation and safety.

  8. DOE Handbook: Guide to good practices for training of technical staff and managers

    SciTech Connect (OSTI)

    NONE

    1997-01-01T23:59:59.000Z

    Training programs at DOE facilities should prepare personnel to safely and efficiently operate the facilities in accordance with DOE requirements. This guide contains information that can be used to develop or validate training programs for technical staff and managers at DOE nuclear facilities. Training programs based on the content of this guide should provide assurance that these personnel perform their jobs safely and competently.

  9. Health physics manual of good practices for the prompt detection of airborne plutonium in the workplace

    SciTech Connect (OSTI)

    Not Available

    1988-07-01T23:59:59.000Z

    This manual provides guidance to US Department of Energy (DOE) facilities on the prompt detection of airborne plutonium in the workplace. Information is first given to aid in detection systems that will function effectively in various workplaces. Steps in designing a system are covered: its general requirements, the plotting of workplace sources of plutonium, and methods of determining workplace airflow patterns. Guidance is provided on the proper numbers and locations of probe sites, the orientation of probes for representative sampling, and the mixture of stationary and portable probes. Recommendations for delivery in sampling systems include examination of particle loss and self-absorption problems, methods of eliminating air leakage in the system, and optimization of decontamination capabilities. System flow rate, requirements in a collection medium, burial loss and pressure drop, and prudent frequency of renewing the collection medium are among air sampling considerations covered. After a discussion of controlling airflow and of vacuum sources and system backups, the checkpoints to ensure system reliability are listed. The manual then discusses instrument specifications that provide correct airborne plutonium concentrations and reliably activate alarms. Focusing on the interrelationship of all components, essential factors in instrument reliability are addressed: the regulatory lower limit of detection and performance specifications of detectors and filters, maintenance and calibration requirements, and features of commonly used plutonium air-sampling instruments. Finally, the manual advises on establishing a documentation program to archive and evaluate the performance of a plutonium air-sampling program.

  10. Good Practice in the Exploitation of Innovative Strategies in Sustainable Urban Transport: City Interview Synthesis

    E-Print Network [OSTI]

    Marsden, Greg; Frick, Karen Trapenberg; May, Anthony D.; Deakin, Elizabeth A

    2009-01-01T23:59:59.000Z

    Vivaldi project with car sharing, introduction of some CNGbuses), smartcards, car sharing, safe routes to school. One

  11. Order Module--DOE-HDBK-1203-97, GUIDE TO GOOD PRACTICES FOR TRAINING OF

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directed offOCHCO2:Introduction toManagementOPAM PolicyOfEnergy Online1of EnergyTECHNICAL STAFF AND

  12. Good Practice Guide on Firewall Deployment for SCADA and Process Control

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742Energy ChinaofSchaefer To: CongestionDevelopment of a downholeReactorsgoal andLastNetworks |

  13. Good practice guide on firewall deployment for SCADA and process control networks

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742Energy ChinaofSchaefer To: CongestionDevelopment of a downholeReactorsgoal andLastNetworks

  14. Guide of Good Practices for Occupational Radiological Protection in Plutonium Facilities

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742Energy ChinaofSchaefer To: CongestionDevelopment ofof EnergyEnvironmentalAnalysis2 December

  15. Guide of Good Practices for Occupational Radiological Protection in Plutonium Facilities

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742Energy ChinaofSchaefer To: CongestionDevelopment ofof EnergyEnvironmentalAnalysis2

  16. Guide of Good Practices for Occupational Radiological Protection in Uranium Facilities

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742Energy ChinaofSchaefer To: CongestionDevelopment ofof EnergyEnvironmentalAnalysis236-2009

  17. Guide of Good Practices for Occupational Radiological Protection in Uranium Facilities

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742Energy ChinaofSchaefer To: CongestionDevelopment ofof

  18. Good Practice Guide on Firewall Deployment for SCADA and Process Control

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 1112011 Strategic2 OPAM Flash2011-12 OPAMGeneral Guidance onGlennNEPA

  19. DOE-HDBK-1001-96; Guide to Good Practices for Training and Qualification of Instructors

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny:Revised Finding of No Significant Impact for Biomass CogenerationFlex Bulletin1-96

  20. DOE-HDBK-1080-97; Guide to Good Practices for Oral Examinations

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny:Revised Finding of No Significant Impact for1-93 JANUARY

  1. DOE-HDBK-1114-98; Guide to Good Practices for Line and Training Manager Activities

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny:Revised Finding of No Significant Impact for1-93 JANUARY092-98REAFFIRMATION4-984-98

  2. DOE-HDBK-1116-98; Guide to Good Practices for Developing and Conducting Case Studies

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny:Revised Finding of No Significant Impact for1-935-98 December 1998 Superseding6-98

  3. DOE-HDBK-1117-99; Guide to Good Practices for Maintenance Supervisor Selection and Development

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny:Revised Finding of No Significant Impact for1-935-98 December 1998

  4. DOE-HDBK-1118-99; Guide to Good Practices for Continuing Training

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny:Revised Finding of No Significant Impact for1-935-98 December 19988-99 October 1999

  5. DOE-HDBK-1200-97; Guide to Good Practices for Developing Learning Objectives

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny:Revised Finding of No Significant Impact6 of 9Control7-1 CHAPTER 7200-97200-97

  6. DOE-HDBK-1201-97; Guide to Good Practices Evaluation Instrument Examples

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny:Revised Finding of No Significant Impact6 of 9Control7-1 CHAPTER 7200-97200-971-97

  7. DOE-HDBK-1204-97; Guide to Good Practices for the Development of Test Items

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny:Revised Finding of No Significant Impact6 of 9Control7-1 CHAPTERMEASUREMENT4-97

  8. DOE-HDBK-1206-98; Guide to Good Practices for On-the-Job Training

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny:Revised Finding of No Significant Impact6 of 9Control7-1

  9. DOE-STD-1030-95; DOE Standard Guide to Good Practices For Lockouts and Tagouts

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny:Revised Finding of No Significant Impact610-94 December8-96 August3-951030-96 May

  10. DOE-STD-1031-92; Guide to Good Practices for Communications

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny:Revised Finding of No Significant Impact610-94 December8-96 August3-951030-96

  11. DOE-STD-1034-93; Guide to Good Practices for Timely Orders to Operators

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny:Revised Finding of No Significant Impact610-94 December8-964-93 March 1993 CHANGE

  12. DOE-STD-1035-93; Guide to Good Practices for Logkeeping

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny:Revised Finding of No Significant Impact610-94 December8-964-93 March 1993

  13. DOE-STD-1036-93; Guide to Good Practices for Independent Verification

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny:Revised Finding of No Significant Impact610-94 December8-964-93 March 19936-93 June

  14. DOE-STD-1037-93; Guide to Good Practices for Operations Aspects of Unique Processes

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny:Revised Finding of No Significant Impact610-94 December8-964-93 March 19936-93

  15. DOE-STD-1038-93; Guide to Good Practices for Operations Turnover

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny:Revised Finding of No Significant Impact610-94 December8-964-93 March 19936-938-93

  16. DOE-STD-1042-93 CN-1; Guide to Good Practices for Control Area Activities

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny:Revised Finding of No Significant Impact610-94 December8-964-93 March0-93 June2-93

  17. DOE-STD-1043-93 CN-1; Guide to Good Practices for Operator Aid Postings

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny:Revised Finding of No Significant Impact610-94 December8-964-93 March0-933-93 June

  18. Making Car Sharing and Car Clubs Work: Good Practice Guide | Open Energy

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal Pwer Plant Jump to:LandownersLuther,Jemez Pueblo Area (DOEMak-Ban /

  19. Good Practice Guidance on the Sustainable Mobilisation of Wood in Europe |

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual SiteofEvaluating AGeothermal/Exploration <GlacialGolden SpreadGomti BiotechUK Jump to:Open

  20. Advancing Toward Test Automation through Effective Manual Testing

    E-Print Network [OSTI]

    . This paper will walk through a best practice scenario for using Manual Tester to more naturally organize test Automation through Effective Manual Testing Bob Levy, Lead Product Manager ­ Functional Test Dennis ElenburgAdvancing Toward Test Automation through Effective Manual Testing May 2005 Advancing Toward Test

  1. Quantifying capital goods for waste incineration

    SciTech Connect (OSTI)

    Brogaard, L.K., E-mail: lksb@env.dtu.dk [Department of Environmental Engineering, Building 115, Technical University of Denmark, DK-2800 Kongens Lyngby (Denmark); Riber, C. [Ramboll, Consulting Engineers, Hannemanns Allé 53, DK-2300 Copenhagen S (Denmark); Christensen, T.H. [Department of Environmental Engineering, Building 115, Technical University of Denmark, DK-2800 Kongens Lyngby (Denmark)

    2013-06-15T23:59:59.000Z

    Highlights: • Materials and energy used for the construction of waste incinerators were quantified. • The data was collected from five incineration plants in Scandinavia. • Included were six main materials, electronic systems, cables and all transportation. • The capital goods contributed 2–3% compared to the direct emissions impact on GW. - Abstract: Materials and energy used for the construction of modern waste incineration plants were quantified. The data was collected from five incineration plants (72,000–240,000 tonnes per year) built in Scandinavia (Norway, Finland and Denmark) between 2006 and 2012. Concrete for the buildings was the main material used amounting to 19,000–26,000 tonnes per plant. The quantification further included six main materials, electronic systems, cables and all transportation. The energy used for the actual on-site construction of the incinerators was in the range 4000–5000 MW h. In terms of the environmental burden of producing the materials used in the construction, steel for the building and the machinery contributed the most. The material and energy used for the construction corresponded to the emission of 7–14 kg CO{sub 2} per tonne of waste combusted throughout the lifetime of the incineration plant. The assessment showed that, compared to data reported in the literature on direct emissions from the operation of incinerators, the environmental impacts caused by the construction of buildings and machinery (capital goods) could amount to 2–3% with respect to kg CO{sub 2} per tonne of waste combusted.

  2. Economic Development Incentive Programs: Some Best Practices

    E-Print Network [OSTI]

    Noble, James S.

    Economic Development Incentive Programs: Some Best Practices Judith I. Stallmann and Thomas G to be concerned about their ability to generate good returns to public investments. First, firms receiving. Johnson is Frank Miller Professor of Agricultural and Applied Economics, and Professor of Public Affairs

  3. FACULTY MENTORING 10 BEST PROGRAM PRACTICES

    E-Print Network [OSTI]

    Rhode Island, University of

    FACULTY MENTORING 10 BEST PROGRAM PRACTICES 1. Visible, overt, regular communication from leadership that good mentoring is a department priority 2. Formal program management 3. Thoughtful mentor matching at hire, and prior to arrival on campus 4. Multiple mentors, one outside department, until tenure

  4. Advanced Quantitative Methodology PSC 702, Spring 2010

    E-Print Network [OSTI]

    Ahmad, Sajjad

    analysis. We will investigate the usefulness of the tool as well as its statistical and practical of others. Most of us "know" that studying hard makes it more likely that we will get good grades. But how of "bad statistics." Course Objectives After completing this course, the successful student will: 1) Know

  5. Fabrication of advanced oxide fuels containing minor actinide for use in fast reactors

    SciTech Connect (OSTI)

    Miwa, Shuhei; Osaka, Masahiko; Tanaka, Kosuke; Ishi, Yohei; Yoshimochi, Hiroshi; Tanaka, Kenya [Oarai Research and Development Center, Japan Atomic Energy Agency, 4002 Oarai-machi, Higashi-ibaraki-gun, Ibaraki, 311-1393 (Japan)

    2007-07-01T23:59:59.000Z

    R and D of advanced fuel containing minor actinide for use in fast reactors is described related to the composite fuel with MgO matrix. Fabrication tests of MgO composite fuels containing Am were done by a practical process that could be adapted to the presently used commercial manufacturing technology. Am-containing MgO composite fuels having good characteristics, i.e., having no defects, a high density, a homogeneous dispersion of host phase, were obtained. As related technology, burn-up characteristics of a fast reactor core loaded with the present MgO composite fuel were also analyzed, mainly in terms of core criticality. Furthermore, phase relations of MA oxide which was assumed to be contained in MgO matrix fuel were experimentally investigated. (authors)

  6. Taught degrees MA in Journalism and Documentary Practice

    E-Print Network [OSTI]

    Sussex, University of

    in the top 10 places to study in the UK in The Complete University Guide 2012-13 and The Times GoodEssentials Taught degrees MA in Journalism and Documentary Practice MA in Journalism and Media Studies MA in Multimedia Journalism Related degrees MA in Creative Media Practice (p119) MA in Digital

  7. Transportation of Dangerous Goods Anyone involved with the Transportation of Dangerous Goods must be trained. This includes shipping

    E-Print Network [OSTI]

    TDG Transportation of Dangerous Goods Anyone involved with the Transportation of Dangerous Goods must be trained. This includes shipping and receiving. All receiving of Dangerous Goods for the Science in Departmental Offices or labs. How do you know if the package is a dangerous goods shipment? Parcels containing

  8. 1. Aim of the Code of Practice 2. Key points

    E-Print Network [OSTI]

    Roelleke, Thomas

    family leave provisions 1August 2011 #12;1 Aim of the Code of Practice The aim is to: 1 promote good1. Aim of the Code of Practice 2. Key points 3. Maternity leave and pay 4. Ante-natal leave 5. Compassionate leave for family and other reasons 1 1 3 4 5 7 8 9 10 HR Code of Practice 14. Maternity and other

  9. Environmental Best Management Practices

    E-Print Network [OSTI]

    Liskiewicz, Maciej

    Environmental Best Management Practices for Virginia's Golf Courses Prepared by Virginia Golf Course Superintendents Association #12;#12;EnvironmEntal BEst managEmEnt PracticEs for virginia's golf III I am pleased to endorse the Environmental Best Management Practices for Virginia's Golf Courses

  10. Institute for ADVANCED STUDY

    E-Print Network [OSTI]

    OF EVENTS 91 · REPORT OF THE INSTITUTE LIBRARIES 93 · INSTITUTE FOR ADVANCED STUDY/PARK CITY MATHEMATICS. The Institute for Advanced Study has sustained this founding principle for more than sixty-five years

  11. Institute Jor ADVANCED STUDY

    E-Print Network [OSTI]

    for advanced study HELENE L. KAPLAN Of Counsel Skiiddcn Arps Slate Meagher & Flam PETER R. KANN Chairman

  12. Advanced Energy Retrofit Guide Retail Buildings

    SciTech Connect (OSTI)

    Liu, Guopeng; Liu, Bing; Zhang, Jian; Wang, Weimin; Athalye, Rahul A.; Moser, Dave; Crowe, Eliot; Bengtson, Nick; Effinger, Mark; Webster, Lia; Hatten, Mike

    2011-09-19T23:59:59.000Z

    The Advanced Energy Retrofit Guide for Retail Buildings is a component of the Department of Energy’s Advanced Energy Retrofit Guides for Existing Buildings series. The aim of the guides is to facilitate a rapid escalation in the number of energy efficiency projects in existing buildings and to enhance the quality and depth of those projects. By presenting general project planning guidance as well as financial payback metrics for the most common energy efficiency measures, these guides provide a practical roadmap to effectively planning and implementing performance improvements for existing buildings.

  13. Advanced Energy Retrofit Guide Office Buildings

    SciTech Connect (OSTI)

    Liu, Guopeng; Liu, Bing; Wang, Weimin; Zhang, Jian; Athalye, Rahul A.; Moser, Dave; Crowe, Eliot; Bengtson, Nick; Effinger, Mark; Webster, Lia; Hatten, Mike

    2011-09-27T23:59:59.000Z

    The Advanced Energy Retrofit Guide for Office Buildings is a component of the Department of Energy’s Advanced Energy Retrofit Guides for Existing Buildings series. The aim of the guides is to facilitate a rapid escalation in the number of energy efficiency projects in existing buildings and to enhance the quality and depth of those projects. By presenting general project planning guidance as well as financial payback metrics for the most common energy efficiency measures, these guides provide a practical roadmap to effectively planning and implementing performance improvements for existing buildings.

  14. Italian Academy Advanced Studies

    E-Print Network [OSTI]

    Qian, Ning

    The Italian Academy for Advanced Studies in America at Columbia University Annual Report 2006­2007 The Italian Academy for Advanced Studies in America at Columbia University Annual Report 2006­2007 #12;italian academy for advanced studies in america 1161 Amsterdam Avenue New York, NY 10027 tel: (212) 854-2306 fax

  15. Annual UMEC Advanced Practice PAs, APRNs (CNMs, CNSs, CRNAs, NPs)

    E-Print Network [OSTI]

    Tipple, Brett

    , Health Sciences Education Bldg, Alumni Hall When: Tuesday March 25, 2014, 5:30-7:30 PM Who: Open to all a friend or spouse. Don't forget your Resume`! This event is brought to you by the Utah Medical Education OPPORTUNITIES AND OTHER UPDATES ON HEALTH WORKFORCE IN UTAH. #12;

  16. advanced radiographic practice: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Summary: We present optical and X-ray radiographical characterization of silica aerogels with refractive index from 1.05 to 1.07 for a Cherenkov radiator. A novel pin-drying...

  17. Advanced Technologies and Practices - Building America Top Innovations |

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directed off Energy.gov. Are you0 ARRA Newsletters 20103-03 AUDITProductsletterInitiativesDepartment

  18. Advances in rapid prototyping

    SciTech Connect (OSTI)

    Atwood, C.L.; McCarty, G.D.; Pardo, B.T.; Bryce, E.A.

    1993-12-31T23:59:59.000Z

    Recent advances in stereolithography and selective laser sintering have had a significant impact on the overall quality of parts produced using these rapid prototyping processes. The development and implementation of 3D System`s QuickCast{trademark} resin and software for building investment casting patterns have proven to be major steps toward fabricating highly accurate patterns with very good surface finishes. Sandia uses patterns generated from rapid prototyping processes to reduce the cycle time and cost of fabricating prototype parts in support of a Sandia National Laboratories managed program called FASTCAST. As participants in the Beta test program for QuickCast{trademark} resin and software, they experienced a steep learning curve and were able to build accurate parts in a short period of time. It is now possible, using this technology, to produce highly accurate prototype parts as well as acceptable firs article and small lots size production parts. They use the Selective Laser Sintering (SLS) process to fabricate prototype wax patterns for investment casting. DTM Corporation recently introduced the use of their polycarbonate material for fabricating investment casting patterns. The polycarbonate material is processed significantly faster, with improved strength, dimensional stability, and without a support structure during the build process. Sandia is currently changing from investment casting wax to polycarbonate for the fabrication of investment casting patterns using the SLS process. This presentation will focus on the successes with these new materials from the standpoints of application, accuracy, surface finish, and post processing. Also presented will be examples of parts manufactured by these processes.

  19. Springfield Utility Board- Super Good Cents Manufactured Homes Rebate Program

    Broader source: Energy.gov [DOE]

    The Springfield Utility Board offers a $600 incentive for the purchase of a Super Good Cents Manufactured Home. Super Good Cents Manufactured Homes offer improve comfort and efficiency. The...

  20. Reducing a Companies Carbon Footprint through Energy Saving Best Practices at a Dairy Manufacturing Facility

    E-Print Network [OSTI]

    Kortan, Michael J.

    2010-12-17T23:59:59.000Z

    , logistics (truck traffic), raw product, finished product), share of best practices data bases, and compare different carbon calculation techniques. - 24 - Reference/Bibliography Energy Efficiency Enquiries Bureau, ETSU, Harwell, Oxforshire, OX11 0RA..., 1995 “Good Practice Guide 160 – Electric lighting controls” Crown Publishing, March 1997. Energy Efficiency Enquiries Bureau, ETSU, Harwell, Oxforshire, OX11 0RA, 1994 “Good Practice Case Study 169 – Energy efficient lighting in factories” Crown...

  1. Shipping and Receiving Dangerous Goods at Georgia Tech

    E-Print Network [OSTI]

    Shipping and Receiving Dangerous Goods at Georgia Tech Contacts: Biological Shipments: Shane://industry.gatech.edu/researchers/forms) GENERAL: The transportation of dangerous goods is regulated by a number of national and international of Dangerous Goods (Flash). PROCESS: 1) All shipments must have a Document Id number as well as a People

  2. Allocating Indivisible Goods IVONA BEZAKOVA and VARSHA DANI

    E-Print Network [OSTI]

    Bezáková, Ivona

    indivisible goods. Each player has a specified valuation function on the subsets of the goods and the goal is to split the goods between the players so as to maximize the minimum valuation. Viewing the problem from a game theoretic perspective, we show that for two players and additive valuations the expected minimum

  3. Good Test Cases Copyright Cem Kaner 2003. All rights reserved. Page 1 What Is a Good Test Case?

    E-Print Network [OSTI]

    Good Test Cases Copyright © Cem Kaner 2003. All rights reserved. Page 1 What Is a Good Test Case of the National Science Foundation (NSF). Abstract Designing good test cases is a complex art. The complexity comes from three sources: Test cases help us discover information. Different types of tests are more

  4. Private Lands, Public Goods: Engaging Landowners in Ecosystem Management

    E-Print Network [OSTI]

    Ferranto, Shasta Patricia

    2012-01-01T23:59:59.000Z

    practice: implementing ecosystem management objectives in2009. Science for managing ecosystem services: Beyondthe Millennium Ecosystem Assessment. Proceedings of the

  5. Advanced Emissions Control Development Program

    SciTech Connect (OSTI)

    A.P.Evans; K.E. Redinger; M.J. Holmes

    1998-04-01T23:59:59.000Z

    The objective of the Advanced Emissions Control Development Program (AECDP) is to develop practical, cost-effective strategies for reducing the emissions of air toxics from coal-fired boilers. Ideally, the project aim is to effectively control air toxic emissions through the use of conventional flue gas cleanup equipment such as electrostatic precipitators (ESPS), fabric filters (baghouse), and wet flue gas desulfurization. Development work to date has concentrated on the capture of mercury, other trace metals, fine particulate and hydrogen chloride. Following the construction and evaluation of a representative air toxics test facility in Phase I, Phase II focused on the evaluation of mercury and several other air toxics emissions. The AECDP is jointly funded by the United States Department of Energy's Federal Energy Technology Center (DOE), the Ohio Coal Development Office within the Ohio Department of Development (oCDO), and Babcock& Wilcox-a McDermott company (B&W).

  6. Advanced Rooftop Unit Control

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Advanced-Rooftop-Unit-Control Sign In About | Careers | Contact | Investors | bpa.gov Search Policy & Reporting Expand Policy & Reporting EE Sectors Expand EE Sectors...

  7. DOE Advanced Protection Project

    Broader source: Energy.gov (indexed) [DOE]

    protection logic in each relay 17 Copyright 2010, Southern California Edison Advanced Protection on the System of the Future * Use fault-interrupting switches with relays...

  8. Advanced Studies Institute

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Engineering Institute Advanced Studies Institute Contact Institute Director Charles Farrar (505) 663-5330 Email UCSD EI Director Michael Todd (858) 534-5951 Professional Staff...

  9. Advanced Thermal Control

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Potential Thermal Control Technologies Advanced Vehicle Systems Technology Transfer Jet Cooling Alternative Coolants TIM Low R Structure Phase Change Spray Cooling Air Cooling...

  10. Advanced Propulsion Technology Strategy

    Broader source: Energy.gov (indexed) [DOE]

    Alternative Sources) Hydrogen Time ADVANCED PROPULSION TECHNOLOGY STRATEGY DOWNSIZED TURBO GAS ENGINE CHEVROLET CRUZE 1.4L TURBO ECOTEC Downsized SIDI Turbo Boosting HCCI -...

  11. Community Power Works: Good Jobs, Green Jobs Conference | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    given by Community Power Works at the Good Jobs, Green Jobs Conference cpwgoodjobsgreenjobs-1.pdf More Documents & Publications Community Power Works Better Buildings...

  12. The spatial range of public goods revealed through referendum voting

    E-Print Network [OSTI]

    Deacon, Robert T; Schläpfer, Felix

    2007-01-01T23:59:59.000Z

    of the contingent valuation method. Regional Studies, 31(6),method for the generic problem of measuring public good benefits is contingent valuation,

  13. admittance means goods: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    efficient method Frey, Brendan J. 76 INFORMATION QUALITY: HOW GOOD ARE OFF-THE-SHELF DBMS? Computer Technologies and Information Sciences Websites Summary: INFORMATION...

  14. Chemical Kinetic Modeling of Advanced Transportation Fuels

    SciTech Connect (OSTI)

    PItz, W J; Westbrook, C K; Herbinet, O

    2009-01-20T23:59:59.000Z

    Development of detailed chemical kinetic models for advanced petroleum-based and nonpetroleum based fuels is a difficult challenge because of the hundreds to thousands of different components in these fuels and because some of these fuels contain components that have not been considered in the past. It is important to develop detailed chemical kinetic models for these fuels since the models can be put into engine simulation codes used for optimizing engine design for maximum efficiency and minimal pollutant emissions. For example, these chemistry-enabled engine codes can be used to optimize combustion chamber shape and fuel injection timing. They also allow insight into how the composition of advanced petroleum-based and non-petroleum based fuels affect engine performance characteristics. Additionally, chemical kinetic models can be used separately to interpret important in-cylinder experimental data and gain insight into advanced engine combustion processes such as HCCI and lean burn engines. The objectives are: (1) Develop detailed chemical kinetic reaction models for components of advanced petroleum-based and non-petroleum based fuels. These fuels models include components from vegetable-oil-derived biodiesel, oil-sand derived fuel, alcohol fuels and other advanced bio-based and alternative fuels. (2) Develop detailed chemical kinetic reaction models for mixtures of non-petroleum and petroleum-based components to represent real fuels and lead to efficient reduced combustion models needed for engine modeling codes. (3) Characterize the role of fuel composition on efficiency and pollutant emissions from practical automotive engines.

  15. Advanced Demand Responsive Lighting

    E-Print Network [OSTI]

    Advanced Demand Responsive Lighting Host: Francis Rubinstein Demand Response Research Center demand responsive lighting systems ­ Importance of dimming ­ New wireless controls technologies · Advanced Demand Responsive Lighting (commenced March 2007) #12;Objectives · Provide up-to-date information

  16. Kansas Advanced Semiconductor Project

    SciTech Connect (OSTI)

    Baringer, P.; Bean, A.; Bolton, T.; Horton-Smith, G.; Maravin, Y.; Ratra, B.; Stanton, N.; von Toerne, E.; Wilson, G.

    2007-09-21T23:59:59.000Z

    KASP (Kansas Advanced Semiconductor Project) completed the new Layer 0 upgrade for D0, assumed key electronics projects for the US CMS project, finished important new physics measurements with the D0 experiment at Fermilab, made substantial contributions to detector studies for the proposed e+e- international linear collider (ILC), and advanced key initiatives in non-accelerator-based neutrino physics.

  17. FREQFIT: Computer program which performs numerical regression and statistical chi-squared goodness of fit analysis

    SciTech Connect (OSTI)

    Hofland, G.S.; Barton, C.C.

    1990-10-01T23:59:59.000Z

    The computer program FREQFIT is designed to perform regression and statistical chi-squared goodness of fit analysis on one-dimensional or two-dimensional data. The program features an interactive user dialogue, numerous help messages, an option for screen or line printer output, and the flexibility to use practically any commercially available graphics package to create plots of the program`s results. FREQFIT is written in Microsoft QuickBASIC, for IBM-PC compatible computers. A listing of the QuickBASIC source code for the FREQFIT program, a user manual, and sample input data, output, and plots are included. 6 refs., 1 fig.

  18. Pesticide safety risk, food chain organization, and the adoption of sustainable farming practices. The case of Moroccan early tomatoes

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    standards and more recently process standards (Good agricultural practices and integrated pest management in safeguarding specific investments, which results in greater diffusion of biocontrol and good agricultural1 Pesticide safety risk, food chain organization, and the adoption of sustainable farming practices

  19. Grid Logging: Best Practices Guide

    SciTech Connect (OSTI)

    Tierney, Brian L; Tierney, Brian L; Gunter, Dan

    2008-04-01T23:59:59.000Z

    The purpose of this document is to help developers of Grid middleware and application software generate log files that will be useful to Grid administrators, users, developers and Grid middleware itself. Currently, most of the currently generated log files are only useful to the author of the program. Good logging practices are instrumental to performance analysis, problem diagnosis, and security auditing tasks such as incident tracing and damage assessment. This document does not discuss the issue of a logging API. It is assumed that a standard log API such as syslog (C), log4j (Java), or logger (Python) is being used. Other custom logging API or even printf could be used. The key point is that the logs must contain the required information in the required format. At a high level of abstraction, the best practices for Grid logging are: (1) Consistently structured, typed, log events; (2) A standard high-resolution timestamp; (3) Use of logging levels and categories to separate logs by detail and purpose; (4) Consistent use of global and local identifiers; and (5) Use of some regular, newline-delimited ASCII text format. The rest of this document describes each of these recommendations in detail.

  20. Radioactive Material Transportation Practices

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2002-09-23T23:59:59.000Z

    Establishes standard transportation practices for Departmental programs to use in planning and executing offsite shipments of radioactive materials including radioactive waste. Does not cancel other directives.

  1. Pearson's Goodness of Fit Statistic as a Score Test Statistic

    E-Print Network [OSTI]

    Smyth, Gordon K.

    Pearson's Goodness of Fit Statistic as a Score Test Statistic Gordon K. Smyth Abstract For any generalized linear model, the Pearson goodness of fit statistic is the score test statistic for testing and the residual deviance is therefore the relationship between the score test and the likelihood ratio test

  2. Empirical Essays on the Efficiency of Heterogeneous Good Auction 

    E-Print Network [OSTI]

    Martin, Thomas A., IV

    2010-01-14T23:59:59.000Z

    A recent pursuit of the auction design literature has been the development of an auction mechanism which performs well in a multi-good setting, when the goods are not substitutes. This work began in earnest with the Federal Communications Commission...

  3. How To Identify a Good Research Topic? Marek J. Druzdzel

    E-Print Network [OSTI]

    Brusilovsky, Peter

    ... But everybody who wants to succeed works hard. "Because I have a secret weapon" Much better! #12;How To Identify a Good Research Topic? Finding a research topic: Secret weapon What is a secret weapon? · A good problem are not completely on your own here ... · Listen to your advisor: He/she is (or should be) one of your secret weapons

  4. Portugal's Budget Austerity May Do More Harm Than Good

    E-Print Network [OSTI]

    Instituto de Sistemas e Robotica

    Portugal's Budget Austerity May Do More Harm Than Good July 02, 2013 4:00 AM by LAUREN FRAYER severe budget austerity does more harm than good. LAUREN FRAYER, BYLINE: Of all the bailed-out countries. Portuguese Finance Minister Vitor Gaspar took it even further - doubling budget cuts and tax hikes. Last year

  5. TECHNICAL ADVANCE EVE (external variance estimation) increases statistical power

    E-Print Network [OSTI]

    Buehlmann, Peter

    TECHNICAL ADVANCE EVE (external variance estimation) increases statistical power for detecting Institute of Plant Sciences & Zurich­Basel Plant Science Center, ETH Zurich, CH-8092 Zurich, Switzerland, our simulation studies suggest that even limited numbers of replicates will usually result in good

  6. advanced reactors advanced: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

  7. advanced ceramics advanced: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

  8. Advanced Vehicle Electrification and Transportation Sector Electrifica...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Advanced Vehicle Electrification and Transportation Sector Electrification Plug-in Hybrid (PHEV) Vehicle Technology Advancement and Demonstration Activity Advanced Vehicle...

  9. Battery concepts for high density energy storage: Principles and practice. C. Austen Angell

    E-Print Network [OSTI]

    Angell, C. Austen

    Battery concepts for high density energy storage: Principles and practice. C. Austen Angell Dept such as the lithium-air battery, and the more advanced zinc-air battery in which only the source needs to be "bottled

  10. Advance Patent Waiver W(A)2010-007 | Department of Energy

    Office of Environmental Management (EM)

    0-007 Advance Patent Waiver W(A)2010-007 This document waives certain patent rights the Department of Energy (DOE) has to inventions conceived or first actually reduced to practice...

  11. Advanced energy design and operation technologies

    SciTech Connect (OSTI)

    Brambley, M.R.; Crawley, D.B.

    1988-09-01T23:59:59.000Z

    Current practice in design of commercial buildings does not adequately consider the relationships between design decisions and energy performance. Estimates indicate that if energy criteria were integral to the design process, more than 15% of the energy used in new buildings could be conserved. This could be done using readily available energy-efficient design knowledge, without any increase in first costs. Furthermore, building design necessarily involves assumptions concerning use and operation of the building once it is built. Currently, operations practices intended by the designer are not adequately transferred during commissioning to building operators for use as guides during operation. Advanced technologies for overcoming these problems are described in this paper. The advanced energy design and operations technologies will consist of an intelligent automated design advisor that utilizes artificial intelligence and other advanced computer technologies to provide assistance to and encourage interaction among all participants in the design process. Assistance will be provided at all points in the building design process, especially in the early phases of design (e.g., during building programming) where decisions can have particularly significant impacts on energy consumption. The technology used for the design advisor will facilitate transfer of critical operation guidance to building operators and, coupled with monitoring technology, provide feedback on performance to the design process. 4 refs., 1 fig.

  12. Science and the Human Good, Schmitt Lecture, Notre Dame, April 21, 2009 Science and the Human Good

    E-Print Network [OSTI]

    Howard, Don

    Science and the Human Good, Schmitt Lecture, Notre Dame, April 21, 2009 Science and the Human Good: How to Think Philosophically about the Place of Values in Science Don Howard Department of Philosophy and Program in History and Philosophy of Science Arthur J. Schmitt Lecture Center for Ethics and Culture

  13. Renewable Chemicals and Advanced Biofuels

    Broader source: Energy.gov [DOE]

    Afternoon Plenary Session: Current Trends in the Advanced Bioindustry Advanced Biofuels & Policy—Brett Lund, Executive Vice President, General Counsel and Secretary, Gevo Inc.

  14. Advanced Materials | More Science | ORNL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Advanced Materials SHARE Advanced Materials ORNL has the nation's most comprehensive materials research program and is a world leader in research that supports the development of...

  15. Institute /or ADVANCED STUDY

    E-Print Network [OSTI]

    OF THE INSTITUTE LIBRARIES 63 INSTITUTE FOR ADVANCED STUDY/PARK CITY MATHEMATICS INSTITUTE 66 · MENTORING PROGRAM sustained and has yielded an unsurpassed record of definitive scholarship. Although small in scale

  16. Institute for ADVANCED STUDY

    E-Print Network [OSTI]

    · PROGRAM IN THEORETICAL BIOLOGY 103 · REPORT OF THE INSTITUTE LIBRARIES 107 INSTITUTE FOR ADVANCED STUDY Study has sustained its founding principle for seventy years. This com- mitment his yielded

  17. The Advanced Manufacturing Partnership

    E-Print Network [OSTI]

    Das, Suman

    ;ve Manufacturing Technologies (led by Dow, Honeywell and MIT) Manufacturing Ins;tutes (led, Honeywell and MIT GOALS § To launch public-private ini:a:ves to advance transforma

  18. Advanced Review Geometry optimization

    E-Print Network [OSTI]

    Schlegel, H. Bernhard

    Advanced Review Geometry optimization H. Bernhard Schlegel Geometry optimization is an important part of most quantum chemical calcu- lations. This article surveys methods for optimizing equilibrium geometries, lo- cating transition structures, and following reaction paths. The emphasis is on optimizations

  19. Advanced Energy Design Guides

    Energy Savers [EERE]

    hotels up to 80 rooms and 4 stories Advanced Energy Design Guide for Small Hospitals and Health- care Facilities ASHE, ASHRAE, AIA, IES, USGBC, DOE Small healthcare facilities up...

  20. The Problem of Evil or the Goodness of God

    E-Print Network [OSTI]

    Reagan, Joshua Allen

    2013-06-04T23:59:59.000Z

    individuals. Whatever else we may claim of this world, we cannot reasonably dispute the existence of various kinds of evil of incredible magnitude. The existence of these evils leads some to infer that a good God cannot exist. After all, if He did exist... of creating a world with moral good. The question is about whether (3) is consistent with (1). That is, the question is about whether we can coherently claim that it is beyond the power of an omnipotent, omniscient, and wholly good God to create a world...

  1. Advanced Distillation Final Report

    SciTech Connect (OSTI)

    Maddalena Fanelli; Ravi Arora; Annalee Tonkovich; Jennifer Marco; Ed Rode

    2010-03-24T23:59:59.000Z

    The Advanced Distillation project was concluded on December 31, 2009. This U.S. Department of Energy (DOE) funded project was completed successfully and within budget during a timeline approved by DOE project managers, which included a one year extension to the initial ending date. The subject technology, Microchannel Process Technology (MPT) distillation, was expected to provide both capital and operating cost savings compared to conventional distillation technology. With efforts from Velocys and its project partners, MPT distillation was successfully demonstrated at a laboratory scale and its energy savings potential was calculated. While many objectives established at the beginning of the project were met, the project was only partially successful. At the conclusion, it appears that MPT distillation is not a good fit for the targeted separation of ethane and ethylene in large-scale ethylene production facilities, as greater advantages were seen for smaller scale distillations. Early in the project, work involved flowsheet analyses to discern the economic viability of ethane-ethylene MPT distillation and develop strategies for maximizing its impact on the economics of the process. This study confirmed that through modification to standard operating processes, MPT can enable net energy savings in excess of 20%. This advantage was used by ABB Lumus to determine the potential impact of MPT distillation on the ethane-ethylene market. The study indicated that a substantial market exists if the energy saving could be realized and if installed capital cost of MPT distillation was on par or less than conventional technology. Unfortunately, it was determined that the large number of MPT distillation units needed to perform ethane-ethylene separation for world-scale ethylene facilities, makes the targeted separation a poor fit for the technology in this application at the current state of manufacturing costs. Over the course of the project, distillation experiments were performed with the targeted mixture, ethane-ethylene, as well as with analogous low relative volatility systems: cyclohexane-hexane and cyclopentane-pentane. Devices and test stands were specifically designed for these efforts. Development progressed from experiments and models considering sections of a full scale device to the design, fabrication, and operation of a single-channel distillation unit with integrated heat transfer. Throughout the project, analytical and numerical models and Computational Fluid Dynamics (CFD) simulations were validated with experiments in the process of developing this platform technology. Experimental trials demonstrated steady and controllable distillation for a variety of process conditions. Values of Height-to-an-Equivalent Theoretical Plate (HETP) ranging from less than 0.5 inch to a few inches were experimentally proven, demonstrating a ten-fold performance enhancement relative to conventional distillation. This improvement, while substantial, is not sufficient for MPT distillation to displace very large scale distillation trains. Fortunately, parallel efforts in the area of business development have yielded other applications for MPT distillation, including smaller scale separations that benefit from the flowsheet flexibility offered by the technology. Talks with multiple potential partners are underway. Their outcome will also help determine the path ahead for MPT distillation.

  2. Complex Fluid Analysis with the Advanced Distillation Curve Approach

    E-Print Network [OSTI]

    Complex Fluid Analysis with the Advanced Distillation Curve Approach Thomas J. Bruno, Lisa S. Ott for measuring distillation curves reveals the physicochemical properties of complex fluids such as fuels distillation curves of complex fluids. The distillation curve provides the only practical avenue to assess

  3. On Approximately Fair Allocations of Indivisible Goods Richard Lipton

    E-Print Network [OSTI]

    Procaccia, Ariel

    Mossel Amin Saberi ABSTRACT We study the problem of fairly allocating a set of indivis- ible goods-0002299. College of Computing, Georgia Tech. Email: {vangelis, saberi}@cc.gatech.edu Department

  4. Three essays in the economics of local public goods

    E-Print Network [OSTI]

    Lutz, Byron F

    2005-01-01T23:59:59.000Z

    This thesis is a collection of three empirical essays on the economics of local public goods. Chapter One examines the marginal propensity of local governments to spend out of lump- sum grant income. Economic theory predicts ...

  5. Good Programming in Transactional Memory$ Game Theory Meets Multicore Architecture

    E-Print Network [OSTI]

    Good Programming in Transactional Memory$ Game Theory Meets Multicore Architecture Raphael compatible. Keywords: transactional memory, game theory, multicore architecture, concurrency, contention management, mechanism design, human factors 1. Introduction In traditional single core architecture

  6. Fuel costs and the retirement of capital goods

    E-Print Network [OSTI]

    Goolsbee, Austan Dean

    1993-01-01T23:59:59.000Z

    This paper explores the effect that energy prices and market conditions have on the retirement rates of capital goods using new micro data on aircraft lifetimes and fuel costs. The oil shocks of the 1970s made fuel intensive ...

  7. A Core Equilibrium Convergence in a Public Goods Economy

    E-Print Network [OSTI]

    Allouch, N

    A core-equilibrium convergence in a public goods economy? Nizar Allouch Queen Mary University of London School of Economics and Finance n.allouch@qmul.ac.uk April 15, 2010 Abstract This paper shows a core-equilibrium convergence in a public goods... economy where consumers’ preferences display warm glow effects. We demonstrate that if each consumer becomes satiated to other con- sumers’ provision, then as the economy grows large the core shrinks to the set of Edgeworth allocations. Moreover, we show...

  8. Task 8.9 - Advanced ceramic materials

    SciTech Connect (OSTI)

    NONE

    1997-06-30T23:59:59.000Z

    Advanced ceramic materials such as Continuous Fiber Reinforced Ceramic Matrix Composites (CFCCs) have had promising results on the companion program entitled ``Ceramic Stationary Gas Turbine`` (CSGT). In particular, CFCCs have outperformed monolithic tiles in structural integrity as a combustor liner. Also, CFCCs have provided the higher temperature operation and improved emissions performance that is required for the ATS combustor. The demonstrated advantages on CSGT justified work to explore the use of advanced ceramic composite materials in other gas turbine components. Sub-tasks include development of a practical, cost effective component fabrication process, development of finite element stress analysis to assure 30,000 hours of component life, and fabrication of a demonstration article.

  9. MATHS 370SC: Advanced Numerical Methods TEST RESULTS

    E-Print Network [OSTI]

    Sharp, Philip

    . It is in any case good practice to plan a calculation. For example, one student wrote down the appropriate A, x.5. Orthogonal polynomials were well done. Least-squares via QR-factorization was OK. Students who did not notice this equation by back substitution. The student began but did not complete the actual numerial calculation

  10. 372 PRACTICE EXAM 2

    E-Print Network [OSTI]

    372 PRACTICE EXAM 2. 13. In a survey of males over the age of 30, it is found 50% are married, 40% smoke, 30% own a home and 60% own a car. It is also ...

  11. Advanced brachytherapy dosimetric considerations

    E-Print Network [OSTI]

    Melhus, Christopher S. (Christopher Scott), 1974-

    2008-01-01T23:59:59.000Z

    The practice of brachytherapy and brachytherapy dosimetry was investigated with emphasis on evaluations of dose distributions and shielding considerations for both photon- and neutron-emitting radionuclides. Monte Carlo ...

  12. Border fixity : when good fences make bad neighbors

    E-Print Network [OSTI]

    Atzili, Boaz

    2006-01-01T23:59:59.000Z

    Since the end of the Second World War, a norm of "border fixity" - a proscription of foreign conquest and annexation of homeland territory - has become prevalent in world politics. Such practices are no longer acceptable ...

  13. Advanced Worker Protection System

    SciTech Connect (OSTI)

    NONE

    1996-04-01T23:59:59.000Z

    The Advanced Worker Protection System (AWPS) is a liquid-air-based, self-contained breathing and cooling system with a duration of 2 hrs. AWPS employs a patented system developed by Oceaneering Space Systems (OSS), and was demonstrated at their facility in Houston, TX as well as at Kansas State University, Manhattan. The heart of the system is the life-support backpack that uses liquid air to provide cooling as well as breathing gas to the worker. The backpack is combined with advanced protective garments, an advanced liquid cooling garment (LCG), a respirator, and communications and support equipment. The prototype unit development and testing under Phase 1 has demonstrated that AWPS has the ability to meet performance criteria. These criteria were developed with an understanding of both the AWPS capabilities and the DOE decontamination and decommissioning (D and D) activities protection needs.

  14. Advanced Hydride Laboratory

    SciTech Connect (OSTI)

    Motyka, T.

    1989-01-01T23:59:59.000Z

    Metal hydrides have been used at the Savannah River Tritium Facilities since 1984. However, the most extensive application of metal hydride technology at the Savannah River Site is being planned for the Replacement Tritium Facility, a $140 million facility schedules for completion in 1990 and startup in 1991. In the new facility, metal hydride technology will be used to store, separate, isotopically purify, pump, and compress hydrogen isotopes. In support of the Replacement Tritium Facility, a $3.2 million, cold,'' process demonstration facility, the Advanced Hydride Laboratory began operation in November of 1987. The purpose of the Advanced Hydride Laboratory is to demonstrate the Replacement Tritium Facility's metal hydride technology by integrating the various unit operations into an overall process. This paper will describe the Advanced Hydride Laboratory, its role and its impact on the application of metal hydride technology to tritium handling.

  15. Advanced Hydride Laboratory

    SciTech Connect (OSTI)

    Motyka, T.

    1989-12-31T23:59:59.000Z

    Metal hydrides have been used at the Savannah River Tritium Facilities since 1984. However, the most extensive application of metal hydride technology at the Savannah River Site is being planned for the Replacement Tritium Facility, a $140 million facility schedules for completion in 1990 and startup in 1991. In the new facility, metal hydride technology will be used to store, separate, isotopically purify, pump, and compress hydrogen isotopes. In support of the Replacement Tritium Facility, a $3.2 million, ``cold,`` process demonstration facility, the Advanced Hydride Laboratory began operation in November of 1987. The purpose of the Advanced Hydride Laboratory is to demonstrate the Replacement Tritium Facility`s metal hydride technology by integrating the various unit operations into an overall process. This paper will describe the Advanced Hydride Laboratory, its role and its impact on the application of metal hydride technology to tritium handling.

  16. Safety Culture And Best Practices At Japan's Fusion Research Facilities

    SciTech Connect (OSTI)

    Rule, K. [Princeton Plasma Physics Lab., Princeton, NJ (United States); King, M. [General Atomics, San Diego, CA (United States); Takase, Y. [Univ. of Tokyo (Japan); Oshima, Y. [Univ. of Tokyo (Japan); Nishimura, K. [National Institute for Fusion Science, Toki (Japan); Sukegawa, A. [Japan Atomic Energy Agency, Naka (Japan)

    2014-04-01T23:59:59.000Z

    The Safety Monitor Joint Working Group (JWG) is one of the magnetic fusion research collaborations between the US Department of Energy and the government of Japan. Visits by occupational safety personnel are made to participating institutions on a biennial basis. In the 2013 JWG visit of US representatives to Japan, the JWG members noted a number of good safety practices in the safety walkthroughs. These good practices and safety culture topics are discussed in this paper. The JWG hopes that these practices for worker safety can be adopted at other facilities. It is a well-known, but unquantified, safety principle that well run, safe facilities are more productive and efficient than other facilities (Rule, 2009). Worker safety, worker productivity, and high quality in facility operation all complement each other (Mottel, 1995).

  17. Safety Culture and Best Practices at Japan's Fusion Research Facilities

    SciTech Connect (OSTI)

    Rule, Keith [PPPL

    2014-05-01T23:59:59.000Z

    The Safety Monitor Joint Working Group (JWG) is one of the magnetic fusion research collaborations between the US Department of Energy and the government of Japan. Visits by occupational safety personnel are made to participating institutions on a biennial basis. In the 2013 JWG visit of US representatives to Japan, the JWG members noted a number of good safety practices in the safety walkthroughs. These good practices and safety culture topics are discussed in this paper. The JWG hopes that these practices for worker safety can be adopted at other facilities. It is a well-known, but unquantified, safety principle that well run, safe facilities are more productive and efficient than other facilities (Rule, 2009). Worker safety, worker productivity, and high quality in facility operation all complement each other (Mottel, 1995).

  18. Advanced fuel chemistry for advanced engines.

    SciTech Connect (OSTI)

    Taatjes, Craig A.; Jusinski, Leonard E.; Zador, Judit; Fernandes, Ravi X.; Miller, James A.

    2009-09-01T23:59:59.000Z

    Autoignition chemistry is central to predictive modeling of many advanced engine designs that combine high efficiency and low inherent pollutant emissions. This chemistry, and especially its pressure dependence, is poorly known for fuels derived from heavy petroleum and for biofuels, both of which are becoming increasingly prominent in the nation's fuel stream. We have investigated the pressure dependence of key ignition reactions for a series of molecules representative of non-traditional and alternative fuels. These investigations combined experimental characterization of hydroxyl radical production in well-controlled photolytically initiated oxidation and a hybrid modeling strategy that linked detailed quantum chemistry and computational kinetics of critical reactions with rate-equation models of the global chemical system. Comprehensive mechanisms for autoignition generally ignore the pressure dependence of branching fractions in the important alkyl + O{sub 2} reaction systems; however we have demonstrated that pressure-dependent 'formally direct' pathways persist at in-cylinder pressures.

  19. Advanced emissions control development program: Phase 2 final report, February 29, 1996--August 31, 1997. Revision 1

    SciTech Connect (OSTI)

    Evans, A.P.; Holmes, M.J.; Redinger, K.E.

    1998-04-01T23:59:59.000Z

    The objective of the advanced emissions control development program (AECDP) is to develop practical, cost-effective strategies for reducing the emissions of air toxics from coal-fired boilers. Ideally, the project aim is to effectively control air toxic emissions through the use of conventional flue gas cleanup equipment such as electrostatic precipitators (ESPs), fabric filters (baghouse), and wet flue gas desulfurization. Development work to date has concentrated on the capture of mercury, other trace metals [antimony, arsenic, barium, cadmium, chromium, cobalt, lead, manganese, nickel, and selenium], fine particulate and hydrogen chloride. Some general comments that can be made about the control of air toxics while burning a high-sulfur bituminous coal are as follows: (1) particulate control devices such as ESP`s and baghouses do a good job of removing non-volatile trace metals; (2) mercury goes through particulate control devices almost entirely uncontrolled; (3) wet scrubbing can effectively remove hydrogen chloride; and (4) wet scrubbers show good potential for the removal of mercury when operated under certain conditions, however additional work is needed to understand the relationship between the wet scrubber`s operating conditions and mercury capture.

  20. Gills Onions Advanced Energy

    E-Print Network [OSTI]

    !!! One-third incoming onions discarded as tail, top, and peel! #12;The Solution... Advanced Energy honor from the American CouncilThe highest honor from the American Council of Engineering Companies Residential & Food Service Anaerobic Digestion Fats, Oil, and Grease (FOG) from Food Service Anaerobic Methane

  1. Advanced Test Reactor Tour

    SciTech Connect (OSTI)

    Miley, Don

    2011-01-01T23:59:59.000Z

    The Advanced Test Reactor at Idaho National Laboratory is the foremost nuclear materials test reactor in the world. This virtual tour describes the reactor, how experiments are conducted, and how spent nuclear fuel is handled and stored. For more information about INL research, visit http://www.facebook.com/idahonationallaboratory.

  2. Search Asia Advanced Search

    E-Print Network [OSTI]

    on state-run forestry companies. Illegal logging activities have cost the Indonesian government some US$600Asia Times Search Asia Times Advanced Search Southeast Asia Indonesia looks to curb log smuggling to discuss the issue of log smuggling, Forestry Minister M Prakosa said. "We will hold bilateral dialogues

  3. Advanced fossil energy utilization

    SciTech Connect (OSTI)

    Shekhawat, D.; Berry, D.; Spivey, J.; Pennline, H.; Granite, E.

    2010-01-01T23:59:59.000Z

    This special issue of Fuel is a selection of papers presented at the symposium ‘Advanced Fossil Energy Utilization’ co-sponsored by the Fuels and Petrochemicals Division and Research and New Technology Committee in the 2009 American Institute of Chemical Engineers (AIChE) Spring National Meeting Tampa, FL, on April 26–30, 2009.

  4. Advanced Test Reactor Tour

    ScienceCinema (OSTI)

    Miley, Don

    2013-05-28T23:59:59.000Z

    The Advanced Test Reactor at Idaho National Laboratory is the foremost nuclear materials test reactor in the world. This virtual tour describes the reactor, how experiments are conducted, and how spent nuclear fuel is handled and stored. For more information about INL research, visit http://www.facebook.com/idahonationallaboratory.

  5. Advances in Lung Volume

    E-Print Network [OSTI]

    Jones, Michelle

    Advances in Lung Volume Reduction Surgery The Ohio University Medical Center Lung Volume Reduction LungVolumeReductionSurgery Spring 2010 © 2010 The Ohio State University Medical Center ­ 04 Consult Ohio State's #12;The Ohio State University Medical Center Lung Volume Reduction Surgery Patient

  6. Advanced lighting guidelines: 1993. Final report

    SciTech Connect (OSTI)

    Eley, C.; Tolen, T.M. [Eley Associates, San Francisco, CA (United States); Benya, J.R. [Luminae Souter Lighting Design, San Francisco, CA (United States); Rubinstein, F.; Verderber, R. [Lawrence Berkeley Lab., CA (United States)

    1993-12-31T23:59:59.000Z

    The 1993 Advanced Lighting Guidelines document consists of twelve guidelines that provide an overview of specific lighting technologies and design application techniques utilizing energy-efficient lighting practice. Lighting Design Practice assesses energy-efficient lighting strategies, discusses lighting issues, and explains how to obtain quality lighting design and consulting services. Luminaires and Lighting Systems surveys luminaire equipment designed to take advantage of advanced technology lamp products and includes performance tables that allow for accurate estimation of luminaire light output and power input. The additional ten guidelines -- Computer-Aided Lighting Design, Energy-Efficient Fluorescent Ballasts, Full-Size Fluorescent Lamps, Compact Fluorescent Lamps, Tungsten-Halogen Lamps, Metal Halide and HPS Lamps, Daylighting and Lumen Maintenance, Occupant Sensors, Time Scheduling Systems, and Retrofit Control Technologies -- each provide a product technology overview, discuss current products on the lighting equipment market, and provide application techniques. This document is intended for use by electric utility personnel involved in lighting programs, lighting designers, electrical engineers, architects, lighting manufacturers` representatives, and other lighting professionals.

  7. Advanced Liquid Natural Gas Onboard Storage System

    SciTech Connect (OSTI)

    Greg Harper; Charles Powars

    2003-10-31T23:59:59.000Z

    Cummins Westport Incorporated (CWI) has designed and developed a liquefied natural gas (LNG) vehicle fuel system that includes a reciprocating pump with the cold end submerged in LNG contained in a vacuum-jacketed tank. This system was tested and analyzed under the U.S. Department of Energy (DOE) Advanced LNG Onboard Storage System (ALOSS) program. The pumped LNG fuel system developed by CWI and tested under the ALOSS program is a high-pressure system designed for application on Class 8 trucks powered by CWI's ISX G engine, which employs high-pressure direct injection (HPDI) technology. A general ALOSS program objective was to demonstrate the feasibility and advantages of a pumped LNG fuel system relative to on-vehicle fuel systems that require the LNG to be ''conditioned'' to saturation pressures that exceeds the engine fuel pressure requirements. These advantages include the capability to store more fuel mass in given-size vehicle and station tanks, and simpler lower-cost LNG refueling stations that do not require conditioning equipment. Pumped LNG vehicle fuel systems are an alternative to conditioned LNG systems for spark-ignition natural gas and port-injection dual-fuel engines (which typically require about 100 psi), and they are required for HPDI engines (which require over 3,000 psi). The ALOSS program demonstrated the feasibility of a pumped LNG vehicle fuel system and the advantages of this design relative to systems that require conditioning the LNG to a saturation pressure exceeding the engine fuel pressure requirement. LNG tanks mounted on test carts and the CWI engineering truck were repeatedly filled with LNG saturated at 20 to 30 psig. More fuel mass was stored in the vehicle tanks as well as the station tank, and no conditioning equipment was required at the fueling station. The ALOSS program also demonstrated the general viability and specific performance of the CWI pumped LNG fuel system design. The system tested as part of this program is designed to be used on Class 8 trucks with CWI ISX G HPDI engines. Extensive test cart and engineering truck tests of the pump demonstrated good durability and the high-pressure performance needed for HPDI application. The LNG tanks manufactured by Taylor-Wharton passed SAE J2343 Recommended Practice drop tests and accelerated road-load vibration tests. NER and hold-time tests produced highly consistent results. Additional tests confirmed the design adequacy of the liquid level sensor, vaporizer, ullage volume, and other fuel system components. While the testing work performed under this program focused on a high-pressure pumped LNG fuel system design, the results also validate the feasibility of a low-pressure pumped fuel system. A low-pressure pumped fuel system could incorporate various design refinements including a simpler and lighter-weight pump, which would decrease costs somewhat relative to a high-pressure system.

  8. BLUE VIEW VISION INSIGHT! Good news--your vision plan

    E-Print Network [OSTI]

    California at Santa Cruz, University of

    WELCOME TO BLUE VIEW VISION INSIGHT! Good news--your vision plan is flexible and easy to use, your discounts, and much more! Blue View Vision InsightSM University of California Student Health Insurance Plan (UC SHIP) 2013/14 Your Blue View Vision Insight Network Blue View Vision Insight offers you

  9. BLUE VIEW VISION INSIGHT! Good news--your vision plan

    E-Print Network [OSTI]

    Barrett, Jeffrey A.

    WELCOME TO BLUE VIEW VISION INSIGHT! Good news--your vision plan is flexible and easy to use, your discounts, and much more! Blue View Vision InsightSM University of California Student Health Insurance Plan (UC SHIP) 2012/13 Your Blue View Vision Insight Network Blue View Vision Insight offers you

  10. It Has to be Good A History of the

    E-Print Network [OSTI]

    Reynolds, Albert C.

    for the petroleum exploration and production industry. Following the resolution of the Suez crisis in 1956 petroleum technology. These seemed to fit well into the industry quest for a exploration and productionIt Has to be Good A History of the Petroleum Abstracts Service at The University of Tulsa John A

  11. Who Gets Diabetes? Good health is your most valuable asset

    E-Print Network [OSTI]

    Who Gets Diabetes? Good health is your most valuable asset ­ make the most of it. Millions, blindness and many other health problems if it is not controlled. By managing this condition with the right care, treatment and lifestyle changes, a patient diagnosed with diabetes can continue to live a happy

  12. Good Fonts for Dyslexia NLP & Web Research Groups

    E-Print Network [OSTI]

    Good Fonts for Dyslexia Luz Rello NLP & Web Research Groups Universitat Pompeu Fabra Barcelona@acm.org ABSTRACT Around 10% of the people have dyslexia, a neurological dis- ability that impairs a person on a text's accessibility for people with dyslexia. However, to the best of our knowledge

  13. Writing a Good Success Story for Your Health Program

    E-Print Network [OSTI]

    Writing a Good Success Story for Your Health Program You may be wondering why, with all that you a success story about the health program in your county. The short answer is that if you don't let others Services's role in improving the health of Texans. Additionally, Health Specialists with the Family

  14. Digital mathematics libraries: The good, the bad, the ugly

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Digital mathematics libraries: The good, the bad, the ugly Thierry Bouche Universit´e de Grenoble I. The mathematicians' Digital mathematics library (DML), which is not to be confused with libraries of mathematical. It is not obvious how much of the traditional library functions we should give up while going digital. The point

  15. INFORMATION QUALITY: HOW GOOD ARE OFF-THE-SHELF DBMS?

    E-Print Network [OSTI]

    Weske, Mathias

    INFORMATION QUALITY: HOW GOOD ARE OFF-THE-SHELF DBMS? Felix Naumann Humboldt-Universität zu Berlin: Commercial database management systems (DBMS) have come a long way with re- spect to efficiency and more to store large amounts of data and intuitive query languages to ac- cess the data; popular DBMS also

  16. Debt bad, surplus good, right? Not necessarily, economists say

    E-Print Network [OSTI]

    Belogay, Eugene A.

    something about it, government debt and deficit spending are not necessarily dirty words. "They allow us not a good thing," Emery said. In other words, having money lying around for a rainy day might work for a family. But having tax money lying around is not a popular way to do things in government because

  17. How good are the Common Core Mathematics Standards?

    E-Print Network [OSTI]

    Wu, Hung-Hsi

    the grade 8 CA standards. Rather, there is a trade-off: each does some things that the other doesn't. #12How good are the Common Core Mathematics Standards? Concord, CA October 29, 2012 H. Wu sets of math standards in the nation, maybe the best. Why did it adopt the CCSSM (Common Core State

  18. Empirical Essays on the Efficiency of Heterogeneous Good Auction

    E-Print Network [OSTI]

    Martin, Thomas A., IV

    2010-01-14T23:59:59.000Z

    to a multi-good setting, performs poorly in the presence of such a value structure. The setting for this analysis is an auction for financial transmission rights held in Texas in 2002. The auction involved twenty two firms and collected almost $70...

  19. “Pay What You Want” as Threshold Public Good Provision

    E-Print Network [OSTI]

    Mak, Vincent; Zwick, Rami; Rao, Akshay R.; Pattaratanakun, Jake A.

    2014-12-31T23:59:59.000Z

    ; feedback; market information “PAY WHAT YOU WANT” 2 “Pay What You Want” as Threshold Public Good Provision In a recent post on the Wikimedia Foundation website, Jimmy Wales, co-founder of Wikipedia, pleaded with users to donate to the website so...

  20. Raising awareness for energy efficiency in the service sector: learning from success stories to disseminate good practices

    E-Print Network [OSTI]

    Boyer, Edmond

    the residential sector. In the UK, the energy consumption growth of the service sector is assessed to be three time higher than for residential sector (SCRASE ­ 2001). Energy efficiency in the service sector1/15 Raising awareness for energy efficiency in the service sector: learning from success stories

  1. DOE-HDBK-1002-96; Guide to Good Practices for Training and Qualification of Chemical Operators

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny:Revised Finding of No Significant Impact for Biomass CogenerationFlex

  2. DOE-HDBK-1003-96; Guide to Good Practices for Training and Qualification of Maintenance Personnel

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny:Revised Finding of No Significant Impact for Biomass CogenerationFlex3-96 March

  3. DOE-HDBK-1202-97; Guide to Good Practices for Teamwork Training and Diagnostic Skills Development

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny:Revised Finding of No Significant Impact6 of 9Control7-1 CHAPTER

  4. DOE-HDBK-1203-97; Guide to Good Practices for Training of Technical Staff and Managers

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny:Revised Finding of No Significant Impact6 of 9Control7-1 CHAPTERMEASUREMENT

  5. DOE-HDBK-1205-97; Guide to Good Practices for the Design, Development, and Implementation of Examinations

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny:Revised Finding of No Significant Impact6 of 9Control7-1 CHAPTERMEASUREMENT4-975-97

  6. DOE-HDBK-3012-2003; DOE Handbook Guide to Good Practices for Operational Readiness Reviews (ORR) Team Leader's Guide

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny:Revised Finding of No Significant Impact610-94 December 1994 CHANGE NOTICE NO. 1NOT

  7. DOE-STD-1012-92; DOE Guideline Guide to Good Practices for On-the-Job Training

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny:Revised Finding of No Significant Impact610-94 December8-96 August 199600T12-92

  8. DOE-STD-1032-92 CN 1; Guide to Good Practices for Operations Organization and Administration

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny:Revised Finding of No Significant Impact610-94 December8-96 August3-951030-962-92

  9. DOE-STD-1033-92; Guide to Good Practices for Operations and Administration Updates Through Required Reading

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny:Revised Finding of No Significant Impact610-94 December8-96

  10. DOE-STD-1039-93; Guide to Good Practices for Control of Equipment and System Status

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny:Revised Finding of No Significant Impact610-94 December8-964-93 March

  11. DOE-STD-1040-93 CN-1; Guide to Good Practices for Control of On-Sight Training

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny:Revised Finding of No Significant Impact610-94 December8-964-93 March0-93 June 1993

  12. DOE-STD-1044-93 CN-1; Guide to Good Practices for Equipment and Piping Labeling

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny:Revised Finding of No Significant Impact610-94 December8-964-93 March0-933-93

  13. DOE-STD-1045-93 CN-1; Guide to Good Practices for Notifications and Investigation of Abnormal Events

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny:Revised Finding of No Significant Impact610-94 December8-964-93 March0-933-935-93

  14. DOE-STD-1055-93; DOE Standard Guideline to Good Practices For Maintenance Management Involvement at DOE Nuclear Facilities

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny:Revised Finding of No Significant Impact610-94 December8-964-931-93 March5-93NOT

  15. DOE-STD-1058-93; DOE Standard Guide to Good Practices For Developing and Conducting Case Studies

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny:Revised Finding of No Significant Impact610-94 December8-964-931-938-93 February

  16. DOE-STD-1064-94; DOE Standard Guideline to Good Practices For Seasonal Facility Preservation at DOE Nuclear Facilities

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny:Revised Finding of No Significant Impact610-9464-94 June 1994 DOE STANDARD

  17. DOE-STD-1065-94; DOE Standard Guideline to Good Practices For Postmaintenance Testing at DOE Nuclear Facilities

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny:Revised Finding of No Significant Impact610-9464-94 June 1994 DOE STANDARD5-94 June

  18. DOE-STD-1067; DOE Standard Guideline to Good Practices for Maintenance Facilities, Equipment, and Tools at DOE Nuclear Facilities

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny:Revised Finding of No Significant Impact610-9464-94 June 1994 DOE STANDARD5-947-94

  19. DOE-STD-1068-94; DOE Standard Guideline to Good Practices For Maintenance History at DOE Nuclear Facilities

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny:Revised Finding of No Significant Impact610-9464-94 June 1994 DOE

  20. DOE-STD-1069-94; Guideline to Good Practices for Maintenance Tools and Equipment Control at DOE Nuclear Facilities

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny:Revised Finding of No Significant Impact610-9464-94 June 1994 DOE9-94 June 1994 DOE

  1. DOE-STD-1072-94; DOE Standard Guideline to Good Practices for Facility Condition Inspections at DOE Nuclear Facilities

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny:Revised Finding of No Significant Impact610-9464-94 June 1994 DOE9-94 June2-94 June

  2. DOE-STD-1128-98 CH 1; Guide of Good Practices for Occupational Radiological Protection in Plutonium Facilities

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny:Revised Finding of No Significant Impact610-9464-941 February 2005 DOE STANDARD

  3. DOE-STD-1136-2004; Guide of Good Practices for Occupational Radiological Protection in Uranium Facilities

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny:Revised Finding of No Significant Impact610-9464-941 February 2005Changes

  4. Herty Advanced Materials Development Center

    Broader source: Energy.gov [DOE]

    Session 1-B: Advancing Alternative Fuels for the Military and Aviation Sector Breakout Session 1: New Developments and Hot Topics Jill Stuckey, Acting Director, Herty Advanced Materials Development Center

  5. ADVANCE! Leadership Experience Project Guidelines

    E-Print Network [OSTI]

    Hone, James

    ADVANCE! Leadership Experience Project Guidelines Fieldwork Practicum Description: The fieldwork component of the ADVANCE! leadership program offers students the opportunity to integrate theory exposure to that industry. Together, they design a leadership project in which the student takes an active

  6. Best Environmental Management Practices

    E-Print Network [OSTI]

    Best Environmental Management Practices Farm Animal Production Comprehensive Nutrient Management with regulatory guidelines by addressing items such as manure management, field crop nutrients, and storm water What is a CNMP? A Comprehensive Nutrient Management Plan (CNMP) is a total planning tool that details

  7. Advanced Photon Source Upgrade Project

    ScienceCinema (OSTI)

    Mitchell, John; Gibson, Murray; Young, Linda; Joachimiak, Andrzej

    2013-04-19T23:59:59.000Z

    Upgrade to Advanced Photon Source announced by Department Of Energy. Read more: http://go.usa.gov/ivZ

  8. Vehicle Technologies Office: 2014 Advanced Combustion Engine...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Advanced Combustion Engine Annual Progress Report Vehicle Technologies Office: 2014 Advanced Combustion Engine Annual Progress Report The Advanced Combustion Engine research and...

  9. Advanced Gasoline Turbocharged Direct Injection (GTDI) Engine...

    Broader source: Energy.gov (indexed) [DOE]

    "Advancing The Technology" Advanced Gasoline Turbocharged Direct Injection (GTDI) Engine Development Corey E. Weaver Ford Research and Advanced Engineering 05132011 Project...

  10. Advanced Gasoline Turbocharged Direct Injection (GTDI) Engine...

    Broader source: Energy.gov (indexed) [DOE]

    "Advancing The Technology" Advanced Gasoline Turbocharged Direct Injection (GTDI) Engine Development Corey E. Weaver Ford Research and Advanced Engineering 05182012 Project...

  11. Advanced Gasoline Turbocharged Direct Injection (GTDI) Engine...

    Broader source: Energy.gov (indexed) [DOE]

    "Advancing The Technology" Advanced Gasoline Turbocharged Direct Injection (GTDI) Engine Development Corey E. Weaver Ford Research and Advanced Engineering 06192014 Project...

  12. Advanced Energy Design Guides | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Advanced Energy Design Guides Advanced Energy Design Guides EERE Building Technologies Program - This fact sheet discusses the Advanced Energy Design Guides (AEDGs) and how they...

  13. Advanced Separation Consortium

    SciTech Connect (OSTI)

    NONE

    2006-01-01T23:59:59.000Z

    The Center for Advanced Separation Technologies (CAST) was formed in 2001 under the sponsorship of the US Department of Energy to conduct fundamental research in advanced separation and to develop technologies that can be used to produce coal and minerals in an efficient and environmentally acceptable manner. The CAST consortium consists of seven universities - Virginia Tech, West Virginia University, University of Kentucky, Montana Tech, University of Utah, University of Nevada-Reno, and New Mexico Tech. The consortium brings together a broad range of expertise to solve problems facing the US coal industry and the mining sector in general. At present, a total of 60 research projects are under way. The article outlines some of these, on topics including innovative dewatering technologies, removal of mercury and other impurities, and modelling of the flotation process. 1 photo.

  14. Eco-Efficiency in Practice: Aligning Business and Environmental Interests in the Upstream Oil and Gas Sector 

    E-Print Network [OSTI]

    Lukacs, J.; Munroe, V.

    2005-01-01T23:59:59.000Z

    , CETAC-WEST (Canadian Environmental Technology Advancement Corporation - West), in mid-2000, introduced a practical approach to eco-efficiency to Western Canada's upstream oil and gas sector. The CETAC-WEST Eco-Efficiency Program, focused primarily...

  15. Eco-Efficiency in Practice: Aligning Business and Environmental Interests in the Upstream Oil and Gas Sector

    E-Print Network [OSTI]

    Lukacs, J.; Munroe, V.

    2005-01-01T23:59:59.000Z

    , CETAC-WEST (Canadian Environmental Technology Advancement Corporation - West), in mid-2000, introduced a practical approach to eco-efficiency to Western Canada's upstream oil and gas sector. The CETAC-WEST Eco-Efficiency Program, focused primarily...

  16. Advances in Parametric X-Ray Production at the RPI Linear Accelerator B. Sones, Y. Danon, and R. Block

    E-Print Network [OSTI]

    Danon, Yaron

    Advances in Parametric X-Ray Production at the RPI Linear Accelerator B. Sones, Y. Danon, and R-ray source for practical applications such as medical imaging and material characterization. This phenomenon

  17. Advanced Polymer Processing Facility

    SciTech Connect (OSTI)

    Muenchausen, Ross E. [Los Alamos National Laboratory

    2012-07-25T23:59:59.000Z

    Some conclusions of this presentation are: (1) Radiation-assisted nanotechnology applications will continue to grow; (2) The APPF will provide a unique focus for radiolytic processing of nanomaterials in support of DOE-DP, other DOE and advanced manufacturing initiatives; (3) {gamma}, X-ray, e-beam and ion beam processing will increasingly be applied for 'green' manufacturing of nanomaterials and nanocomposites; and (4) Biomedical science and engineering may ultimately be the biggest application area for radiation-assisted nanotechnology development.

  18. Advanced worker protection system

    SciTech Connect (OSTI)

    Caldwell, B.; Duncan, P.; Myers, J.

    1995-12-01T23:59:59.000Z

    The Department of Energy (DOE) is in the process of defining the magnitude and diversity of Decontamination and Decommissioning (D&D) obligations at its numerous sites. The DOE believes that existing technologies are inadequate to solve many challenging problems such as how to decontaminate structures and equipment cost effectively, what to do with materials and wastes generated, and how to adequately protect workers and the environment. Preliminary estimates show a tremendous need for effective use of resources over a relatively long period (over 30 years). Several technologies are being investigated which can potentially reduce D&D costs while providing appropriate protection to DOE workers. The DOE recognizes that traditional methods used by the EPA in hazardous waste site clean up activities are insufficient to provide the needed protection and worker productivity demanded by DOE D&D programs. As a consequence, new clothing and equipment which can adequately protect workers while providing increases in worker productivity are being sought for implementation at DOE sites. This project will result in the development of an Advanced Worker Protection System (AWPS). The AWPS will be built around a life support backpack that uses liquid air to provide cooling as well as breathing gas to the worker. The backpack will be combined with advanced protective garments, advanced liquid cooling garment, respirator, communications, and support equipment to provide improved worker protection, simplified system maintenance, and dramatically improve worker productivity through longer duration work cycles. Phase I of the project has resulted in a full scale prototype Advanced Worker Protection Ensemble (AWPE, everything the worker will wear), with sub-scale support equipment, suitable for integrated testing and preliminary evaluation. Phase II will culminate in a full scale, certified, pre-production AWPS and a site demonstration.

  19. Advanced thyristor valve project

    SciTech Connect (OSTI)

    Damsky, B.L.

    1984-01-01T23:59:59.000Z

    General Electrics's thyristor valve project incorporates the most advanced technologies available. With joint funding from the Electric Power Research Institute, commercial application of the separate light-triggered thyristor is now underway. The cesium vapor lamp source to trigger the light sensitive thyristors will reduce component complexity and cost. A unique thermal management feature relies on forced vaporization cooling with Freon-113, which equals the thermal performance of water without posing insulation reliability problems. 7 figures.

  20. Advanced Microturbine Systems

    SciTech Connect (OSTI)

    None

    2005-12-31T23:59:59.000Z

    Dept. of Energy (DOE) Cooperative Agreement DE-FC02-00-CH11061 was originally awarded to Honeywell International, Inc. â?? Honeywell Power Systems Inc. (HPSI) division located in Albuquerque, NM in October 2000 to conduct a program titled Advanced Microturbine Systems (AMS). The DOE Advanced Microturbines Systems Program was originally proposed as a five-year program to design and develop a high efficiency, low emissions, durable microturbine system. The period of performance was to be October 2000 through September 2005. Program efforts were underway, when one year into the program Honeywell sold the intellectual property of Honeywell Power Systems Inc. and HPSI ceased business operations. Honeywell made an internal decision to restructure the existing program due to the HPSI shutdown and submitted a formal request to DOE on September 24, 2001 to transfer the Cooperative Agreement to Honeywell Engines, Systems and Services (HES&S) in Phoenix, AZ in order to continue to offer support for DOE's Advanced Microturbine Program. Work continued on the descoped program under Cooperative Agreement No. DE-FC26-00-CH11061 and has been completed.

  1. Directional learning and the provisioning of public goods

    E-Print Network [OSTI]

    Nax, Heinrich H

    2015-01-01T23:59:59.000Z

    We consider an environment where players are involved in a public goods game and must decide repeatedly whether to make an individual contribution or not. However, players lack strategically relevant information about the game and about the other players in the population. The resulting behavior of players is completely uncoupled from such information, and the individual strategy adjustment dynamics are driven only by reinforcement feedbacks from each player's own past. We show that the resulting "directional learning" is sufficient to explain cooperative deviations away from the Nash equilibrium. We introduce the concept of k-strong equilibria, which nest both the Nash equilibrium and the Aumann-strong equilibrium as two special cases, and we show that, together with the parameters of the learning model, the maximal k-strength of equilibrium determines the stationary distribution. The provisioning of public goods can be secured even under adverse conditions, as long as players are sufficiently responsive to ...

  2. Advanced Modular Inverter Technology Development

    SciTech Connect (OSTI)

    Adam Szczepanek

    2006-02-04T23:59:59.000Z

    Electric and hybrid-electric vehicle systems require an inverter to convert the direct current (DC) output of the energy generation/storage system (engine, fuel cells, or batteries) to the alternating current (AC) that vehicle propulsion motors use. Vehicle support systems, such as lights and air conditioning, also use the inverter AC output. Distributed energy systems require an inverter to provide the high quality AC output that energy system customers demand. Today's inverters are expensive due to the cost of the power electronics components, and system designers must also tailor the inverter for individual applications. Thus, the benefits of mass production are not available, resulting in high initial procurement costs as well as high inverter maintenance and repair costs. Electricore, Inc. (www.electricore.org) a public good 501 (c) (3) not-for-profit advanced technology development consortium assembled a highly qualified team consisting of AeroVironment Inc. (www.aerovironment.com) and Delphi Automotive Systems LLC (Delphi), (www.delphi.com), as equal tiered technical leads, to develop an advanced, modular construction, inverter packaging technology that will offer a 30% cost reduction over conventional designs adding to the development of energy conversion technologies for crosscutting applications in the building, industry, transportation, and utility sectors. The proposed inverter allows for a reduction of weight and size of power electronics in the above-mentioned sectors and is scalable over the range of 15 to 500kW. The main objective of this program was to optimize existing AeroVironment inverter technology to improve power density, reliability and producibility as well as develop new topology to reduce line filter size. The newly developed inverter design will be used in automotive and distribution generation applications. In the first part of this program the high-density power stages were redesigned, optimized and fabricated. One of the main tasks was to design and validate new gate drive circuits to provide the capability of high temp operation. The new power stages and controls were later validated through extensive performance, durability and environmental tests. To further validate the design, two power stages and controls were integrated into a grid-tied load bank test fixture, a real application for field-testing. This fixture was designed to test motor drives with PWM output up to 50kW. In the second part of this program the new control topology based on sub-phases control and interphase transformer technology was successfully developed and validated. The main advantage of this technology is to reduce magnetic mass, loss and current ripple. This report summarizes the results of the advanced modular inverter technology development and details: (1) Power stage development and fabrication (2) Power stage validation testing (3) Grid-tied test fixture fabrication and initial testing (4) Interphase transformer technology development

  3. Training environment in General Practice and preparedness for practice 

    E-Print Network [OSTI]

    Wiener-Ogilvie, Sharon; Ogilvie, Sharon Wiener

    2014-07-04T23:59:59.000Z

    This thesis explores the way General Practice trainees and early career General Practitioners describe their training environment in General Practice, the meaning they attach to the notion of preparedness and their ...

  4. Draft Advanced Nuclear Energy Projects Solicitation | Department...

    Broader source: Energy.gov (indexed) [DOE]

    Federal loan guarantee solicitation announcement -- Advanced Nuclear Energy Projects. Draft Advanced Nuclear Energy Projects Solicitation More Documents & Publications Draft...

  5. Northeast Energy Efficiency Partnerships: Advanced Lighting Controls...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Northeast Energy Efficiency Partnerships: Advanced Lighting Controls - 2015 Peer Review Northeast Energy Efficiency Partnerships: Advanced Lighting Controls - 2015 Peer Review...

  6. Southface Energy Institute: Advanced Commercial Buildings Initiative...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Southface Energy Institute: Advanced Commercial Buildings Initiative - 2015 Peer Review Southface Energy Institute: Advanced Commercial Buildings Initiative - 2015 Peer Review...

  7. Enhancing Transportation Energy Security through Advanced Combustion...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Transportation Energy Security through Advanced Combustion and Fuels Technologies Enhancing Transportation Energy Security through Advanced Combustion and Fuels Technologies 2005...

  8. Advanced Battery Materials Characterization: Success stories...

    Broader source: Energy.gov (indexed) [DOE]

    Advanced Battery Materials Characterization: Success stories from the High Temperature Materials Laboratory (HTML) User Program Advanced Battery Materials Characterization: Success...

  9. Department of Mathematics: Advanced Graduate Course ...

    E-Print Network [OSTI]

    Advanced Graduate Course Advertisements. Descriptions of advanced graduate courses for specific semesters. The course advertisements are PDF documents.

  10. Smith Electric Vehicles: Advanced Vehicle Electrification + Transporta...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Smith Electric Vehicles: Advanced Vehicle Electrification + Transportation Sector Electrification Smith Electric Vehicles: Advanced Vehicle Electrification + Transportation Sector...

  11. Electrolytes - Advanced Electrolyte and Electrolyte Additives...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    More Documents & Publications Electrolytes - Advanced Electrolyte and Electrolyte Additives Electrolytes - Advanced Electrolyte and Electrolyte Additives Develop & Evaluate...

  12. Electrolytes - Advanced Electrolyte and Electrolyte Additives...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    More Documents & Publications Development of Advanced Electrolytes and Electrolyte Additives Electrolytes - Advanced Electrolyte and Electrolyte Additives Develop & evaluate...

  13. ADVANCED SULFUR CONTROL CONCEPTS

    SciTech Connect (OSTI)

    Apostolos A. Nikolopoulos; Santosh K. Gangwal; William J. McMichael; Jeffrey W. Portzer

    2003-01-01T23:59:59.000Z

    Conventional sulfur removal in integrated gasification combined cycle (IGCC) power plants involves numerous steps: COS (carbonyl sulfide) hydrolysis, amine scrubbing/regeneration, Claus process, and tail-gas treatment. Advanced sulfur removal in IGCC systems involves typically the use of zinc oxide-based sorbents. The sulfides sorbent is regenerated using dilute air to produce a dilute SO{sub 2} (sulfur dioxide) tail gas. Under previous contracts the highly effective first generation Direct Sulfur Recovery Process (DSRP) for catalytic reduction of this SO{sub 2} tail gas to elemental sulfur was developed. This process is currently undergoing field-testing. In this project, advanced concepts were evaluated to reduce the number of unit operations in sulfur removal and recovery. Substantial effort was directed towards developing sorbents that could be directly regenerated to elemental sulfur in an Advanced Hot Gas Process (AHGP). Development of this process has been described in detail in Appendices A-F. RTI began the development of the Single-step Sulfur Recovery Process (SSRP) to eliminate the use of sorbents and multiple reactors in sulfur removal and recovery. This process showed promising preliminary results and thus further process development of AHGP was abandoned in favor of SSRP. The SSRP is a direct Claus process that consists of injecting SO{sub 2} directly into the quenched coal gas from a coal gasifier, and reacting the H{sub 2}S-SO{sub 2} mixture over a selective catalyst to both remove and recover sulfur in a single step. The process is conducted at gasifier pressure and 125 to 160 C. The proposed commercial embodiment of the SSRP involves a liquid phase of molten sulfur with dispersed catalyst in a slurry bubble-column reactor (SBCR).

  14. Advanced Manufacture of Reflectors

    Broader source: Energy.gov [DOE]

    The Advance Manufacture of Reflectors fact sheet describes a SunShot Initiative project being conducted research team led by the University of Arizona, which is working to develop a novel method for shaping float glass. The technique developed by this research team can drastically reduce the time required for the shaping step. By enabling mass production of solar concentrating mirrors at high speed, this project should lead to improved performance and as much as a 40% reduction in manufacturing costs for reflectors made in very high volume.

  15. Horizontal Advanced Tensiometer

    DOE Patents [OSTI]

    Hubbell, Joel M.; Sisson, James B.

    2004-06-22T23:59:59.000Z

    An horizontal advanced tensiometer is described that allows the monitoring of the water pressure of soil positions, particularly beneath objects or materials that inhibit the use of previous monitoring wells. The tensiometer includes a porous cup, a pressure transducer (with an attached gasket device), an adaptive chamber, at least one outer guide tube which allows access to the desired horizontal position, a transducer wire, a data logger and preferably an inner guide tube and a specialized joint which provides pressure on the inner guide tube to maintain the seal between the gasket of the transducer and the adaptive chamber.

  16. Advanced NTR options. [Ta

    SciTech Connect (OSTI)

    Davis, J.W.; Mills, J.C.; Glass, J.F.; Tu, W. (Rockwell International/Rocketdyne Division, 6633 Canoga Avenue, MS HB23 Canoga Park, California 81303 (US))

    1991-01-05T23:59:59.000Z

    Advanced NTR concepts which offer performance improvements over the ROVER/NERVA designs have been investigated. In addition, the deliverable performance of low pressure operation and materials issues have been investigated. Based on current experience, a maximum exit gas temperature of 3200 K is likely achievable with a ZrC based PBR design. At 3200 K a low pressure NTR would have marginal performance advantage (Isp) over a high pressure system. If tantalum or other high melting point carbides are used then an exit gas temperature of 3500 K may be feasible. At 3500 K low pressure operation offers more significant performance improvements which could outweigh associated size and mass penalties.

  17. Advanced Simulation Capability

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 111 1,613Portsmouth SitePresentations |StateNuclear Energy Projects4 Status Report The Advanced

  18. Advanced Simulation Capability

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 111 1,613Portsmouth SitePresentations |StateNuclear Energy Projects4 Status Report The Advanced2

  19. Advanced Conversion Roadmap Workshop

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page onYouTube YouTube Note: Since the YouTube platform is alwaysISO 50001Energy Efficiency Grants |Energy|AdvancedLeslie

  20. Advanced Combustion FAQs

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office511041cloth DocumentationProducts (VAP) VAP7-0973 1BP-14 Power and TransmissionAdolphusAdvanced

  1. Advanced Materials Manufacturing | ORNL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office511041cloth DocumentationProducts (VAP) VAP7-0973 1BP-14 Power andAdvancedCMWG

  2. Advanced Rooftop Unit Control

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office511041cloth DocumentationProducts (VAP) VAP7-0973 1BP-14 PowerAdvanced ModelingNuclear

  3. Advanced Studies Institute

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office511041cloth DocumentationProducts (VAP) VAP7-0973 1BP-14 PowerAdvanced

  4. Advanced Studies Institute

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office511041cloth DocumentationProducts (VAP) VAP7-0973 1BP-14 PowerAdvancedInstitute Engineering Institute

  5. Advanced Target Effects Modeling

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office511041cloth DocumentationProducts (VAP) VAP7-0973 1BP-14 PowerAdvancedInstitute Engineering

  6. Advanced Feedstock Supply System

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny: The Future of1 AAccelerated agingDepartmentDevelopment and1 | BioenergyAdvanced

  7. Zebra: An advanced PWR lattice code

    SciTech Connect (OSTI)

    Cao, L.; Wu, H.; Zheng, Y. [School of Nuclear Science and Technology, Xi'an Jiaotong Univ., No. 28, Xianning West Road, Xi'an, ShannXi, 710049 (China)

    2012-07-01T23:59:59.000Z

    This paper presents an overview of an advanced PWR lattice code ZEBRA developed at NECP laboratory in Xi'an Jiaotong Univ.. The multi-group cross-section library is generated from the ENDF/B-VII library by NJOY and the 361-group SHEM structure is employed. The resonance calculation module is developed based on sub-group method. The transport solver is Auto-MOC code, which is a self-developed code based on the Method of Characteristic and the customization of AutoCAD software. The whole code is well organized in a modular software structure. Some numerical results during the validation of the code demonstrate that this code has a good precision and a high efficiency. (authors)

  8. Good Earths and Rare Earths | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't YourTransport(Fact Sheet), Geothermal TechnologiesGeothermalGo for the Gold inDepartmentGood

  9. Good Earths and Rare Earths | Department of Energy

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directed offOCHCO2: FinalOffers3.pdf0-45.pdf0 BudgetGoals and Requirements Goals and RequirementsOtherGood

  10. Gooding County, Idaho: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are8COaBulkTransmissionSitingProcess.pdfGetec AG Contracting Jump to:Echo,GEFLakes,Goliad County,Good

  11. Real Goods Solar San Rafael | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghuraji Agro Industries Pvt Ltd Jump to: navigation, searchRay County, Missouri:ReSunReal Goods Solar San

  12. Real Goods Solar Santa Cruz | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghuraji Agro Industries Pvt Ltd Jump to: navigation, searchRay County, Missouri:ReSunReal Goods Solar

  13. `Perfect ventilation, good sewerage and effective water closets': Urban factors in the development

    E-Print Network [OSTI]

    `Perfect ventilation, good sewerage and effective water closets': Urban factors in the development sanitation ``Perfect ventilation, good sewerage and effective water closets': Urban factors ventilation, good sewerage and effective water closets': Urban factors in the development of modern nursing

  14. Supply chain network considerations for e-retail of luxury goods in Canada

    E-Print Network [OSTI]

    Tansoy, Dilek

    2012-01-01T23:59:59.000Z

    The Internet has changed the way people purchase goods in the 21st century: many types of goods and services have become available online. Luxury goods followed this trend after an initial delay, primarily due to the nature ...

  15. Digitization Best Practices

    SciTech Connect (OSTI)

    Xue, Fei [Los Alamos National Laboratory; Holtkamp, Irma S. [Los Alamos National Laboratory; Knudson, Frances L. [Los Alamos National Laboratory

    2012-07-31T23:59:59.000Z

    This project involved performing tests and documenting results to determine best practices for digitizing older print documents. The digitization process is complicated, especially when original documents exhibit non-standard fonts and are faded. Tests focused on solutions to improve high quality scanning, increase OCR accuracy, and efficiently use embedded metadata. Results are summarized. From the test results on the right sides, we know that when we plan to digitize documents, we should balance Quantity and Quality based on our expectation, and then make final decision for the digitization process.

  16. Some Principles and Practices in the Irrigation of Texas Soils.

    E-Print Network [OSTI]

    Bloodworth, Morris E.

    1959-01-01T23:59:59.000Z

    exist among soil, water and plants. Good irrigation practices also must take into ac- t such important factors as soil fertility. amount and quality of water, adapted crops and varieties, land xration for irrigation, water distribution over the land..., irrigation timing to suit crop needs, rate of water application for a particular soil type, capacity of soils to store and release water, rates of seeding and root development and distribution within the soil storage reservoir for obtaining both water...

  17. ADVANCED TURBINE SYSTEMS PROGRAM

    SciTech Connect (OSTI)

    Gregory Gaul

    2004-04-21T23:59:59.000Z

    Natural gas combustion turbines are rapidly becoming the primary technology of choice for generating electricity. At least half of the new generating capacity added in the US over the next twenty years will be combustion turbine systems. The Department of Energy has cosponsored with Siemens Westinghouse, a program to maintain the technology lead in gas turbine systems. The very ambitious eight year program was designed to demonstrate a highly efficient and commercially acceptable power plant, with the ability to fire a wide range of fuels. The main goal of the Advanced Turbine Systems (ATS) Program was to develop ultra-high efficiency, environmentally superior and cost effective competitive gas turbine systems for base load application in utility, independent power producer and industrial markets. Performance targets were focused on natural gas as a fuel and included: System efficiency that exceeds 60% (lower heating value basis); Less than 10 ppmv NO{sub x} emissions without the use of post combustion controls; Busbar electricity that are less than 10% of state of the art systems; Reliability-Availability-Maintainability (RAM) equivalent to current systems; Water consumption minimized to levels consistent with cost and efficiency goals; and Commercial systems by the year 2000. In a parallel effort, the program was to focus on adapting the ATS engine to coal-derived or biomass fuels. In Phase 1 of the ATS Program, preliminary investigators on different gas turbine cycles demonstrated that net plant LHV based efficiency greater than 60% was achievable. In Phase 2 the more promising cycles were evaluated in greater detail and the closed-loop steam-cooled combined cycle was selected for development because it offered the best solution with least risk for achieving the ATS Program goals for plant efficiency, emissions, cost of electricity and RAM. Phase 2 also involved conceptual ATS engine and plant design and technology developments in aerodynamics, sealing, combustion, cooling, materials, coatings and casting development. The market potential for the ATS gas turbine in the 2000-2014 timeframe was assessed for combined cycle, simple cycle and integrated gasification combined cycle, for three engine sizes. The total ATS market potential was forecasted to exceed 93 GW. Phase 3 and Phase 3 Extension involved further technology development, component testing and W501ATS engine detail design. The technology development efforts consisted of ultra low NO{sub x} combustion, catalytic combustion, sealing, heat transfer, advanced coating systems, advanced alloys, single crystal casting development and determining the effect of steam on turbine alloys. Included in this phase was full-load testing of the W501G engine at the McIntosh No. 5 site in Lakeland, Florida.

  18. Field practice internship final report

    SciTech Connect (OSTI)

    Foster, T.

    1994-05-01T23:59:59.000Z

    This field practice internship final report gives an overview of the field practice, which was completed at the Oak Ridge Y-12 Plant, Martin Marietta Energy Systems, Inc., Environmental Management Department, Oak Ridge, Tennessee. The field practice focused on the completion of the Superfund Amendments and Reauthorization Act (SARA) Title III, Emergency Planning and Community Right-to-Know Act Section 312, Tier II Report. The field practice internship was conducted on a full-time basis between December 13, 1993 through February 18, 1994. Sheila Poligone, Emergency Planning and Community Right-to-Know Act (EPCRA) Coordinator served as the field practice preceptor.

  19. New Media Practices in Korea

    E-Print Network [OSTI]

    Ok, Hyeryoung

    2011-01-01T23:59:59.000Z

    P. , & Kerr, A. (2001). Digital media, nation-states andmost advanced IT and digital media culture, Korean youths’construction of the global digital media scene. Introduction

  20. Sandia National Laboratories: advanced combustion

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    combustion Sandia and General Motors: Advancing Clean Combustion Engines with Predictive Simulation Tools On February 14, 2013, in CRF, Energy, Partnership, Transportation Energy...

  1. Advanced Combustion | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Combustion Advanced Combustion Combustion engines drive a large percentage of our nation's transportation vehicles and power generation and manufacturing facilities. Today's...

  2. ADVANCED NUCLEAR TRANSFORMATION TECHNOLOGY SUBCOMMITTEE

    Broader source: Energy.gov (indexed) [DOE]

    AND ENGINEERING Under the Advanced Fuels Cycle Initiative, Transmutation Science and Engineering is divided into four subprograms: Physics, Structural Materials, Materials...

  3. Video Library | Advanced Photon Source

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    APS Brochure Annual Reports Posters Podcasts Image Gallery external site Video Library Syndicated Feeds (RSS) Now Playing: The Advanced Photon Source More videos: Building...

  4. Video Library | Advanced Photon Source

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    APS Brochure Annual Reports Posters Podcasts Image Gallery external site Video Library Syndicated Feeds (RSS) Featured Videos: Introduction to the Advanced Photon Source...

  5. Sandia National Laboratories: Advanced Biofuels

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Advanced Biofuels Biofuels Blend Right In: Researchers Show Ionic Liquids Effective for Pretreating Mixed Blends of Biofuel Feedstocks On February 26, 2013, in Biofuels, Biomass,...

  6. Video Library | Advanced Photon Source

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Video Library Related Links: APS Colloquium APS Podcasts APS Today More videos: Introduction to the APS Physics of the Blues Now Playing: Building the Advanced Photon Source This...

  7. Advanced HEV/PHEV Concepts

    Broader source: Energy.gov (indexed) [DOE]

    - In-kind Barriers Addressed * Cost * Settingvalidating technical targets * Design optimization for maximum mpg * Infrastructure and convenience for advanced technology vehicle...

  8. Fuels for Advanced Combustion Engines

    Broader source: Energy.gov (indexed) [DOE]

    Fuels for Advanced Combustion Engines Bradley T. Zigler National Renewable Energy Laboratory 15 May 2012 Project ID FT002 This presentation does not contain any proprietary,...

  9. Advanced drilling systems study.

    SciTech Connect (OSTI)

    Pierce, Kenneth G.; Livesay, Billy Joe; Finger, John Travis (Livesay Consultants, Encintas, CA)

    1996-05-01T23:59:59.000Z

    This report documents the results of a study of advanced drilling concepts conducted jointly for the Natural Gas Technology Branch and the Geothermal Division of the U.S. Department of Energy. A number of alternative rock cutting concepts and drilling systems are examined. The systems cover the range from current technology, through ongoing efforts in drilling research, to highly speculative concepts. Cutting mechanisms that induce stress mechanically, hydraulically, and thermally are included. All functions necessary to drill and case a well are considered. Capital and operating costs are estimated and performance requirements, based on comparisons of the costs for alternative systems to conventional drilling technology, are developed. A number of problems common to several alternatives and to current technology are identified and discussed.

  10. The Advanced Light Source

    SciTech Connect (OSTI)

    Jackson, A.

    1991-05-01T23:59:59.000Z

    The Advanced Light Source (ALS), a national user facility currently under construction at the Lawrence Berkeley Laboratory (LBL), is a third-generation synchrotron light source designed to produce extremely bright beams of synchrotron radiation in the energy range from a few eV to 10 keV. The design is based on a 1--1.9-GeV electron storage ring (optimized at 1.5 GeV), and utilizes special magnets, known as undulators and wigglers (collectively referred to as insertion devices), to generate the radiation. The facility is scheduled to begin operating in April 1993. In this paper we describe the progress in the design, construction, and commissioning of the accelerator systems, insertion devices, and beamlines. Companion presentations at this conference give more detail of specific components in the ALS, and describe the activities towards establishing an exciting user program. 3 figs., 2 tabs.

  11. Advanced thyristor valve project

    SciTech Connect (OSTI)

    Flairty, C. (General Electric Co., Malvern, PA (USA))

    1991-04-01T23:59:59.000Z

    An advanced thyristor value was developed HVDC conversion applications. New features incorporated in the design include: improved heat transfer from the thyristors, two phase cooling of components, and light firing required the development of both a separate light triggered thyristor with a full forward blocking voltage rating and a special flash lamp employing cesium vapor as the associated light source. A valve rated 133 kV and 2200 A bridge current was constructed and lab tested before shipment to the Sylmar Converter Station, which is the southern terminus of the Pacific DC Intertie. The Los Angeles Department of Water and Power, which operates the Sylmar Station, installed the valve and operated it to gain experience. 36 figs., 5 tabs.

  12. Advanced servo manipulator

    DOE Patents [OSTI]

    Holt, W.E.; Kuban, D.P.; Martin, H.L.

    1988-10-25T23:59:59.000Z

    An advanced servo manipulator has modular parts. Modular motor members drive individual input gears to control shoulder roll, shoulder pitch, elbow pitch, wrist yaw, wrist pitch, wrist roll, and tong spacing. The modules include a support member, a shoulder module for controlling shoulder roll, and a sleeve module attached to the shoulder module in fixed relation thereto. The shoulder roll sleeve module has an inner cylindrical member rotatable relative to the outer cylindrical member, and upon which a gear pod assembly is mounted. A plurality of shafts are driven by the gears, which are in turn driven by individual motor modules to transmit rotary power to control elbow pitch as well as to provide four different rotary shafts across the bendable elbow joint to supply rotary motive power to a wrist member and tong member. 41 figs.

  13. Advanced Containment System

    DOE Patents [OSTI]

    Kostelnik, Kevin M. (Idaho Falls, ID); Kawamura, Hideki (Tokyo, JP); Richardson, John G. (Idaho Falls, ID); Noda, Masaru (Tokyo, JP)

    2004-10-12T23:59:59.000Z

    An advanced containment system for containing buried waste and associated leachate. A trench is dug on either side of the zone of interest containing the buried waste so as to accommodate a micro tunnel boring machine. A series of small diameter tunnels are serially excavated underneath the buried waste. The tunnels are excavated by the micro tunnel boring machine at a consistent depth and are substantially parallel to each other. As tunneling progresses, steel casing sections are connected end to end in the excavated portion of the tunnel so that a steel tube is formed. Each casing section has complementary interlocking structure running its length that interlocks with complementary interlocking structure on the adjacent casing section. Thus, once the first tube is emplaced, placement of subsequent tubes is facilitated by the complementary interlocking structure on the adjacent, previously placed, casing sections.

  14. Advanced Containment System

    DOE Patents [OSTI]

    Kostelnik, Kevin M. (Idaho Falls, ID); Kawamura, Hideki (Tokyo, JP); Richardson, John G. (Idaho Falls, ID); Noda, Masaru (Tokyo, JP)

    2005-05-24T23:59:59.000Z

    An advanced containment system for containing buried waste and associated leachate. A trench is dug on either side of the zone of interest containing the buried waste so as to accommodate a micro tunnel boring machine. A series of small diameter tunnels are serially excavated underneath the buried waste. The tunnels are excavated by the micro tunnel boring machine at a consistent depth and are substantially parallel to each other. As tunneling progresses, steel casing sections are connected end to end in the excavated portion of the tunnel so that a steel tube is formed. Each casing section has complementary interlocking structure running its length that interlocks with complementary interlocking structure on the adjacent casing section. Thus, once the first tube is emplaced, placement of subsequent tubes is facilitated by the complementary interlocking structure on the adjacent, previously placed, casing sections.

  15. Manufacture of radiopharmaceuticals-recent advances

    SciTech Connect (OSTI)

    Krieger, J.K.

    1996-12-31T23:59:59.000Z

    Trends in radiopharmaceutical manufacturing have been influenced by the demands of the regulatory agencies, the demands of the customers, and the ever-increasing complexity of new products. Process improvements resulting from automation in the production of radionuclides for diagnostic imaging products, {sup 99m}/Tc generators, {sup 67}Ga, and {sup 201}Tl have been introduced to enhance compliance with current good manufacturing practices and to improve worker safety, both by reducing dose in accord with as low as reasonably achievable levels of radiation and by providing an ergonomically sound environment. Tighter process control has resulted in less lot-to-lot variability and ensures reliability of supply. Reduced manufacturing lapse time for {sup 99m}Tc generators minimizes decay and conserves the supply of {sup 99}Mo. Automation has resulted in an even greater degree of remote operation and has led to reductions in dose, improved process control, and faster throughput in the manufacture of radionuclides.

  16. Energy transport faster than light in good conductors and superconductors

    E-Print Network [OSTI]

    Z. Y. Wang

    2012-02-09T23:59:59.000Z

    People need a model to study tachyons whose prediction can be tested easily. The dispersion relation w^2=k^2C^2-a^2C^2 of a low-frequency electromagnetic field in good conductors is equivalent to the energy-momentum equation E^2=p^2C^2-m^2C^4 of a tachyon where the proportionality coefficient is h^2. An experiment in 1980s to measure the phase velocity Vp [1] can be regarded as an indirect evidence of the superluminal velocity V>>c of those photons just equals the rate of energy flow S/w of the field.Instability of the tachyonic field corresponds to the Joule heat. To detect the speed of energy is difficult and we plan to modulate signals to observe the information velocity (speed of points of non-analyticity)[2].

  17. Good Samaritan Hospital`s energy efficiency improvements

    SciTech Connect (OSTI)

    Sterrett, R.; Dobberpuhl, W.; Gernet, B.; O`Brien, T.

    1995-06-01T23:59:59.000Z

    Arizona Public Service (APS) encourages its customers to use energy wisely by providing incentives to install energy efficient systems. APS provided an incentive to the Good Samaritan Hospital, located in Phoenix, Arizona, to install a Waste Heat Recovery Unit and an Economizer Cooling System to improve the performance of the hospital`s central plant. Waste heat recovered from the boilers stacks is used to preheat combustion air and boiler feed water. The Economizer Cooling System uses a plate and frame heat exchanger to cool the hospital with cold water produced by the cooling tower rather than an electrical chiller. To determine the effectiveness of these two systems APS initiated a project to monitor their performance. Alternative Energy Systems Consulting, Inc. (AESC) has installed instrumentation to monitor the performance of the above systems and will document their energy savings and effectiveness at reducing energy costs.

  18. Protecting Your Farm's Markets and Profitability: Writing a Practical Food Safety Plan for Small and Diversified Farms

    E-Print Network [OSTI]

    Hayden, Nancy J.

    the foundation to help you prepare for a Good Agricultural Practices (GAPs) audit certification, it is designedProtecting Your Farm's Markets and Profitability: Writing a Practical Food Safety Plan for Small and Diversified Farms CENTER FOR SUSTAINABLE AGRICULTURE UVM Extension's Center for Sustainable Agriculture

  19. ENVIRONMENTAL REMEDIAL ACTION – ARE WE DOING MORE HARM THAN GOOD?

    E-Print Network [OSTI]

    Bruce W. Church

    The International Commission on Radiological Protection (ICRP) (1) has stated that interventions i.e., remedial actions should do more good than harm. This paper examines completed cleanup projects to answer the question posed in the title. Various researchers have published that toxins in the environment only cause a small percentage of cancers i.e., 1-3 percent (2,3). Estimates of hypothetical fatal cancers are inflated because primarily it is assumed that people will change their living habits and move onto or near uncontrolled waste sites. An occupancy factor of 100 % is used and by using large populations exposed to miniscule levels of radiation (4) unreal levels of fatal cancers are predicted. What we observe are technically indefensible numbers of cancers being calculated for these hypothetical people. This and other maximizing assumptions inflate the risk. The inflated risk, along with very conservative criteria, drives the removal of large volumes of soil and debris. An unintended consequence of these costly well-intentioned (5) remedial actions is the real fatalities and injuries that occur to workers doing the construction and to members of the public through transportation activities. Even though some analysis include the estimates of worker risk, there is little or no discussion which highlights the fact that real risk is being traded for hypothetical risk. This paper is an attempt to review this situation and through cited literature and case studies, come to a better understanding of what if any good is really being done. Maybe it is time to consider this transfer of risk from hypothetical victims to the real victims in remedial action decision-making.

  20. Passive research and practice

    SciTech Connect (OSTI)

    Balcomb, J.D.

    1983-01-01T23:59:59.000Z

    Passive-solar applications in buildings are described and examples are given to illustrate how research in the field has been approached. The major emphasis of the research has been on devising mathematical models to characterize heat flow within buildings, on the validation of these models by comparison with test results, and on the subsequent use of the models to investigate the influence of both various design parameters and the weather on system performance. Results from both test modules and monitored buildings are given. Simulation analysis, the development of simplified methods, and systems analysis are outlined. Passive-solar practice is described and the key elements that have led to successful passive-solar applications are discussed.

  1. Laser Direct Drive: Scientific Advances,

    E-Print Network [OSTI]

    1 Laser Direct Drive: Scientific Advances, Technical Achievements, and the Road To Fusion Energy energy gain ( 40) at 1 MJ laser energy · Advanced lasers/ target designs overcome uniformity requirements, medical applications) Gas laser medium is easy to cool (tough to break gas) Nike single beam focus #12

  2. Advanced LBB methodology and considerations

    SciTech Connect (OSTI)

    Olson, R.; Rahman, S.; Scott, P. [Battelle, Columbus, OH (United States)] [and others

    1997-04-01T23:59:59.000Z

    LBB applications have existed in many industries and more recently have been applied in the nuclear industry under limited circumstances. Research over the past 10 years has evolved the technology so that more advanced consideration of LBB can now be given. Some of the advanced considerations for nuclear plants subjected to seismic loading evaluations are summarized in this paper.

  3. Systems Engineering Advancement Research Initiative

    E-Print Network [OSTI]

    de Weck, Olivier L.

    Systems Engineering Advancement Research Initiative RESEARCH PORTFOLIO Fall 2008 About SEAri http://seari.mit.edu The Systems Engineering Advancement Research Initiative brings together a set of sponsored research projects and a consortium of systems engineering leaders from industry, government, and academia. SEAri is positioned within

  4. Advanced Hydrogen Turbine Development

    SciTech Connect (OSTI)

    Joesph Fadok

    2008-01-01T23:59:59.000Z

    Siemens has developed a roadmap to achieve the DOE goals for efficiency, cost reduction, and emissions through innovative approaches and novel technologies which build upon worldwide IGCC operational experience, platform technology, and extensive experience in G-class operating conditions. In Phase 1, the technologies and concepts necessary to achieve the program goals were identified for the gas turbine components and supporting technology areas and testing plans were developed to mitigate identified risks. Multiple studies were conducted to evaluate the impact in plant performance of different gas turbine and plant technologies. 2015 gas turbine technologies showed a significant improvement in IGCC plant efficiency, however, a severe performance penalty was calculated for high carbon capture cases. Thermodynamic calculations showed that the DOE 2010 and 2015 efficiency targets can be met with a two step approach. A risk management process was instituted in Phase 1 to identify risk and develop mitigation plans. For the risks identified, testing and development programs are in place and the risks will be revisited periodically to determine if changes to the plan are necessary. A compressor performance prediction has shown that the design of the compressor for the engine can be achieved with additional stages added to the rear of the compressor. Tip clearance effects were studied as well as a range of flow and pressure ratios to evaluate the impacts to both performance and stability. Considerable data was obtained on the four candidate combustion systems: diffusion, catalytic, premix, and distributed combustion. Based on the results of Phase 1, the premixed combustion system and the distributed combustion system were chosen as having the most potential and will be the focus of Phase 2 of the program. Significant progress was also made in obtaining combustion kinetics data for high hydrogen fuels. The Phase 1 turbine studies indicate initial feasibility of the advanced hydrogen turbine that meets the aggressive targets set forth for the advanced hydrogen turbine, including increased rotor inlet temperature (RIT), lower total cooling and leakage air (TCLA) flow, higher pressure ratio, and higher mass flow through the turbine compared to the baseline. Maintaining efficiency with high mass flow Syngas combustion is achieved using a large high AN2 blade 4, which has been identified as a significant advancement beyond the current state-of-the-art. Preliminary results showed feasibility of a rotor system capable of increased power output and operating conditions above the baseline. In addition, several concepts were developed for casing components to address higher operating conditions. Rare earth modified bond coat for the purpose of reducing oxidation and TBC spallation demonstrated an increase in TBC spallation life of almost 40%. The results from Phase 1 identified two TBC compositions which satisfy the thermal conductivity requirements and have demonstrated phase stability up to temperatures of 1850 C. The potential to join alloys using a bonding process has been demonstrated and initial HVOF spray deposition trials were promising. The qualitative ranking of alloys and coatings in environmental conditions was also performed using isothermal tests where significant variations in alloy degradation were observed as a function of gas composition. Initial basic system configuration schematics and working system descriptions have been produced to define key boundary data and support estimation of costs. Review of existing materials in use for hydrogen transportation show benefits or tradeoffs for materials that could be used in this type of applications. Hydrogen safety will become a larger risk than when using natural gas fuel as the work done to date in other areas has shown direct implications for this type of use. Studies were conducted which showed reduced CO{sub 2} and NOx emissions with increased plant efficiency. An approach to maximize plant output is needed in order to address the DOE turbine goal for 20-30% reduction o

  5. Dangerous Goods Storage Guideline Page 1 of 18 Version: 1.1, 16/12/2010

    E-Print Network [OSTI]

    New South Wales, University of

    Dangerous Goods Storage Guideline Page 1 of 18 Version: 1.1, 16/12/2010 OHS 404 Dangerous Goods Hazardous substances and Dangerous Goods Procedure Responsible Officer Director of Human Resources Contact.................................................................................................................................. 1 3. General principles for storage for dangerous goods

  6. Advanced robot locomotion.

    SciTech Connect (OSTI)

    Neely, Jason C.; Sturgis, Beverly Rainwater; Byrne, Raymond Harry; Feddema, John Todd; Spletzer, Barry Louis; Rose, Scott E.; Novick, David Keith; Wilson, David Gerald; Buerger, Stephen P.

    2007-01-01T23:59:59.000Z

    This report contains the results of a research effort on advanced robot locomotion. The majority of this work focuses on walking robots. Walking robot applications include delivery of special payloads to unique locations that require human locomotion to exo-skeleton human assistance applications. A walking robot could step over obstacles and move through narrow openings that a wheeled or tracked vehicle could not overcome. It could pick up and manipulate objects in ways that a standard robot gripper could not. Most importantly, a walking robot would be able to rapidly perform these tasks through an intuitive user interface that mimics natural human motion. The largest obstacle arises in emulating stability and balance control naturally present in humans but needed for bipedal locomotion in a robot. A tracked robot is bulky and limited, but a wide wheel base assures passive stability. Human bipedal motion is so common that it is taken for granted, but bipedal motion requires active balance and stability control for which the analysis is non-trivial. This report contains an extensive literature study on the state-of-the-art of legged robotics, and it additionally provides the analysis, simulation, and hardware verification of two variants of a proto-type leg design.

  7. ADVANCED CUTTINGS TRANSPORT STUDY

    SciTech Connect (OSTI)

    Troy Reed; Stefan Miska; Nicholas Takach; Kaveh Ashenayi; Mark Pickell; Len Volk; Mike Volk; Lei Zhou; Zhu Chen; Crystal Redden; Aimee Washington

    2003-01-30T23:59:59.000Z

    This is the second quarterly progress report for Year-4 of the ACTS Project. It includes a review of progress made in: (1) Flow Loop construction and development and (2) research tasks during the period of time between October 1, 2002 and December 30, 2002. This report presents a review of progress on the following specific tasks. (a) Design and development of an Advanced Cuttings Transport Facility Task 3: Addition of a Cuttings Injection/Separation System, Task 4: Addition of a Pipe Rotation System. (b) New research project (Task 9b): ''Development of a Foam Generator/Viscometer for Elevated Pressure and Elevated Temperature (EPET) Conditions''. (d) Research project (Task 10): ''Study of Cuttings Transport with Aerated Mud Under Elevated Pressure and Temperature Conditions''. (e) Research on three instrumentation tasks to measure: Cuttings concentration and distribution in a flowing slurry (Task 11), Foam texture while transporting cuttings. (Task 12), and Viscosity of Foam under EPET (Task 9b). (f) New Research project (Task 13): ''Study of Cuttings Transport with Foam under Elevated Pressure and Temperature Conditions''. (g) Development of a Safety program for the ACTS Flow Loop. Progress on a comprehensive safety review of all flow-loop components and operational procedures. (Task 1S). (h) Activities towards technology transfer and developing contacts with Petroleum and service company members, and increasing the number of JIP members.

  8. ADVANCED HYBRID PARTICULATE COLLECTOR

    SciTech Connect (OSTI)

    Stanley J. Miller; Grant L. Schelkoph; Grant E. Dunham

    2000-12-01T23:59:59.000Z

    A new concept in particulate control, called an advanced hybrid particulate collector (AHPC), is being developed under funding from the US Department of Energy. The AHPC combines the best features of electrostatic precipitators (ESPs) and baghouses in an entirely novel manner. The AHPC concept combines fabric filtration and electrostatic precipitation in the same housing, providing major synergism between the two methods, both in the particulate collection step and in transfer of dust to the hopper. The AHPC provides ultrahigh collection efficiency, overcoming the problem of excessive fine-particle emissions with conventional ESPs, and solves the problem of reentrainment and recollection of dust in conventional baghouses. Phase I of the development effort consisted of design, construction, and testing of a 5.7-m{sup 3}/min (200-acfm) working AHPC model. Results from both 8-hour parametric tests and 100-hour proof-of-concept tests with two different coals demonstrated excellent operability and greater than 99.99% fine-particle collection efficiency.

  9. University of Rochester Medical Center Advancement Director for Advancement and Alumni Relations

    E-Print Network [OSTI]

    Portman, Douglas

    University of Rochester Medical Center Advancement Director for Advancement 58 Overview: Reporting to the Sr. Assistant Vice President for Medical Center Advancement for Academic Programs (SAVP), the Director of Advancement

  10. UESC Best Practices Subcontractor Selection

    Broader source: Energy.gov (indexed) [DOE]

    Best Practices Subcontractor Selection Presented by: Patricia Nardone FEDERAL UTILITY PARTNERSHIP WORKING GROUP SEMINAR May 7 - 8, 2014 Virginia Beach, VA Main Approaches * Utility...

  11. http://rcc.its.psu.edu/hpc Advanced CFD Models for Next-Generation Combustion Systems

    E-Print Network [OSTI]

    Bjørnstad, Ottar Nordal

    http://rcc.its.psu.edu/hpc Advanced CFD Models for Next-Generation Combustion Systems S: Requirements for next-generation combustion systems include: Increased performance, Reduced fuel consumption, and for direct-injection diesel engines Models carried intact from simulations of laboratory flames give good

  12. Analysis of advanced biofuels.

    SciTech Connect (OSTI)

    Dec, John E.; Taatjes, Craig A.; Welz, Oliver; Yang, Yi

    2010-09-01T23:59:59.000Z

    Long chain alcohols possess major advantages over ethanol as bio-components for gasoline, including higher energy content, better engine compatibility, and less water solubility. Rapid developments in biofuel technology have made it possible to produce C{sub 4}-C{sub 5} alcohols efficiently. These higher alcohols could significantly expand the biofuel content and potentially replace ethanol in future gasoline mixtures. This study characterizes some fundamental properties of a C{sub 5} alcohol, isopentanol, as a fuel for homogeneous-charge compression-ignition (HCCI) engines. Wide ranges of engine speed, intake temperature, intake pressure, and equivalence ratio are investigated. The elementary autoignition reactions of isopentanol is investigated by analyzing product formation from laser-photolytic Cl-initiated isopentanol oxidation. Carbon-carbon bond-scission reactions in the low-temperature oxidation chemistry may provide an explanation for the intermediate-temperature heat release observed in the engine experiments. Overall, the results indicate that isopentanol has a good potential as a HCCI fuel, either in neat form or in blend with gasoline.

  13. Making Sequential Consistency Practical in TitaniumPractical in Titanium

    E-Print Network [OSTI]

    California at Berkeley, University of

    Making Sequential Consistency Practical in TitaniumPractical in Titanium Amir Kamil, Jimmy Su, and Katherine Yelick, y , Titanium Group http://titanium.cs.berkeley.edu U.C. Berkeley November 15 2005November by another threadthread · Titanium, Java, UPC, and many other languages do not provide sequentiallanguages do

  14. Draft Advanced Nuclear Energy Solicitation Public Meeting Presentation...

    Office of Environmental Management (EM)

    Draft Advanced Nuclear Energy Solicitation Public Meeting Presentation Draft Advanced Nuclear Energy Solicitation Public Meeting Presentation Draft Advanced Nuclear Solicitation...

  15. Advanced Materials Center of Excellence Jason Boehm

    E-Print Network [OSTI]

    Advanced Materials Center of Excellence Webinar Jason Boehm Program Coordination Office National · Materials Genome Initiative · Advanced Materials Center of Excellence · Overview Federal Funding Opportunity one Center focused on Advanced Materials Depending on FY2014 Funding NIST expects to announce

  16. Advanced Light Source Activity Report 2005

    E-Print Network [OSTI]

    Tamura Ed., Lori S.

    2010-01-01T23:59:59.000Z

    upgrade on the Advanced Light Source," Nucl. Instrum. Meth.n photoemission at the Advanced Light Source," Radiât. Phys.high-pressure studies at the Advanced Light Source w i t h a

  17. State Technologies Advancement Collaborative

    SciTech Connect (OSTI)

    David S. Terry

    2012-01-30T23:59:59.000Z

    The U. S. Department of Energy (DOE), National Association of State Energy Officials (NASEO), and Association of State Energy Research and Technology Transfer Institutions (ASERTTI) signed an intergovernmental agreement on November 14, 2002, that allowed states and territories and the Federal Government to better collaborate on energy research, development, demonstration and deployment (RDD&D) projects. The agreement established the State Technologies Advancement Collaborative (STAC) which allowed the states and DOE to move RDD&D forward using an innovative competitive project selection and funding process. A cooperative agreement between DOE and NASEO served as the contracting instrument for this innovative federal-state partnership obligating funds from DOE's Office of Energy Efficiency and Renewable Energy and Office of Fossil Energy to plan, fund, and implement RDD&D projects that were consistent with the common priorities of the states and DOE. DOE's Golden Field Office provided Federal oversight and guidance for the STAC cooperative agreement. The STAC program was built on the foundation of prior Federal-State efforts to collaborate on and engage in joint planning for RDD&D. Although STAC builds on existing, successful programs, it is important to note that it was not intended to replace other successful joint DOE/State initiatives such as the State Energy Program or EERE Special Projects. Overall the STAC process was used to fund, through three competitive solicitations, 35 successful multi-state research, development, deployment, and demonstration projects with an overall average non-federal cost share of 43%. Twenty-two states were awarded at least one prime contract, and organizations in all 50 states and some territories were involved as subcontractors in at least one STAC project. Projects were funded in seven program areas: (1) Building Technologies, (2) Industrial Technologies, (3) Transportation Technologies, (4) Distributed Energy Resources, (5) Hydrogen Technology Learning Centers, (6) Fossil Energy, and (7) Rebuild America.

  18. ADVANCED TURBINE SYSTEMS PROGRAM

    SciTech Connect (OSTI)

    Sy Ali

    2002-03-01T23:59:59.000Z

    The market for power generation equipment is undergoing a tremendous transformation. The traditional electric utility industry is restructuring, promising new opportunities and challenges for all facilities to meet their demands for electric and thermal energy. Now more than ever, facilities have a host of options to choose from, including new distributed generation (DG) technologies that are entering the market as well as existing DG options that are improving in cost and performance. The market is beginning to recognize that some of these users have needs beyond traditional grid-based power. Together, these changes are motivating commercial and industrial facilities to re-evaluate their current mix of energy services. One of the emerging generating options is a new breed of advanced fuel cells. While there are a variety of fuel cell technologies being developed, the solid oxide fuel cells (SOFC) and molten carbonate fuel cells (MCFC) are especially promising, with their electric efficiency expected around 50-60 percent and their ability to generate either hot water or high quality steam. In addition, they both have the attractive characteristics of all fuel cells--relatively small siting footprint, rapid response to changing loads, very low emissions, quiet operation, and an inherently modular design lending itself to capacity expansion at predictable unit cost with reasonably short lead times. The objectives of this project are to:(1) Estimate the market potential for high efficiency fuel cell hybrids in the U.S.;(2) Segment market size by commercial, industrial, and other key markets;(3) Identify and evaluate potential early adopters; and(4) Develop results that will help prioritize and target future R&D investments. The study focuses on high efficiency MCFC- and SOFC-based hybrids and competing systems such as gas turbines, reciprocating engines, fuel cells and traditional grid service. Specific regions in the country have been identified where these technologies and the corresponding early adopters are likely to be located.

  19. Advanced Geothermal Turbodrill

    SciTech Connect (OSTI)

    W. C. Maurer

    2000-05-01T23:59:59.000Z

    Approximately 50% of the cost of a new geothermal power plant is in the wells that must be drilled. Compared to the majority of oil and gas wells, geothermal wells are more difficult and costly to drill for several reasons. First, most U.S. geothermal resources consist of hot, hard crystalline rock formations which drill much slower than the relatively soft sedimentary formations associated with most oil and gas production. Second, high downhole temperatures can greatly shorten equipment life or preclude the use of some technologies altogether. Third, producing viable levels of electricity from geothermal fields requires the use of large diameter bores and a high degree of fluid communication, both of which increase drilling and completion costs. Optimizing fluid communication often requires creation of a directional well to intersect the best and largest number of fracture capable of producing hot geothermal fluids. Moineau motor stators made with elastomers cannot operate at geothermal temperatures, so they are limited to the upper portion of the hole. To overcome these limitations, Maurer Engineering Inc. (MEI) has developed a turbodrill that does not use elastomers and therefore can operate at geothermal temperatures. This new turbodrill uses a special gear assembly to reduce the output speed, thus allowing a larger range of bit types, especially tri-cone roller bits, which are the bits of choice for drilling hard crystalline formations. The Advanced Geothermal Turbodrill (AGT) represents a significant improvement for drilling geothermal wells and has the potential to significantly reduce drilling costs while increasing production, thereby making geothermal energy less expensive and better able to compete with fossil fuels. The final field test of the AGT will prepare the tool for successful commercialization.

  20. DOE - Office of Legacy Management -- Westinghouse Advanced Reactors...

    Office of Legacy Management (LM)

    Advanced Reactors Div Plutonium and Advanced Fuel Labs - PA 10 FUSRAP Considered Sites Site: WESTINGHOUSE ADVANCED REACTORS DIV., PLUTONIUM FUEL LABORATORIES, AND THE ADVANCED FUEL...

  1. Colorado Forestry Best Management Practices

    E-Print Network [OSTI]

    Stephens, Graeme L.

    Colorado Forestry Best Management Practices Forest Stewardship Guidelines for Water Quality Management Practices (BMPs) for forestry activities. BMPs are a set of water-quality protection measures-harvest sites in southwest Colorado to assess Colorado forestry BMP application and effectiveness. Sites were

  2. UNITED NATIONS BEST PRACTICES IN

    E-Print Network [OSTI]

    Catholic University of Chile (Universidad Católica de Chile)

    UNITED NATIONS BEST PRACTICES IN INVESTMENT FOR DEVELOPMENT CASE STUDIES IN FDI How to Utilize FDI Practices in Investment for Development is a programme of case studies in making foreign direct investment and development. UNCTAD's approach is to undertake case studies of a pair of developed and developing

  3. Advanced Technology Vehicles Manufacturing Incentive Program...

    Broader source: Energy.gov (indexed) [DOE]

    Advanced Technology Vehicles Manufacturing Incentive Program Advanced Technology Vehicles Manufacturing Incentive Program This is an interim final rule that establishes the...

  4. Advanced Coal Wind Hybrid: Economic Analysis

    E-Print Network [OSTI]

    Phadke, Amol

    2008-01-01T23:59:59.000Z

    of Figures Figure ES-1. Advanced Coal Wind Hybrid: Basicviii Figure 1. Advanced-Coal Wind Hybrid: Basic29 Figure 9. Sensitivity to Coal

  5. Advanced Computational Methods for Turbulence and Combustion...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Advanced Computational Methods for Turbulence and Combustion Advanced Computational Methods for Turbulence and Combustion Bell.png Key Challenges: Development and application of...

  6. Advanced Coal Wind Hybrid: Economic Analysis

    E-Print Network [OSTI]

    Phadke, Amol

    2008-01-01T23:59:59.000Z

    farms with advanced coal generation facilities and operatingfarms with advanced coal generation facilities and operatingin the stand-alone coal generation option (IGCC+CCS plant)

  7. Recent Device Developments with Advanced Bulk Thermoelectric...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Device Developments with Advanced Bulk Thermoelectric Materials at RTI Recent Device Developments with Advanced Bulk Thermoelectric Materials at RTI Reviews work in engineered...

  8. 2012 Advanced Applications Research & Development Peer Review...

    Broader source: Energy.gov (indexed) [DOE]

    2012 Advanced Applications R&D Peer Review - Mode Meter Development - Ning Zhou, PNNL 2012 Advanced Applications R&D Peer Review - Oscillation Monitoring System - Mani...

  9. Improved Solvers for Advanced Engine Combustion Simulation |...

    Broader source: Energy.gov (indexed) [DOE]

    Improved Solvers for Advanced Engine Combustion Simulation Improved Solvers for Advanced Engine Combustion Simulation 2013 DOE Hydrogen and Fuel Cells Program and Vehicle...

  10. Chemical Kinetic Models for Advanced Engine Combustion

    Broader source: Energy.gov (indexed) [DOE]

    Models for Advanced Engine Combustion William J. Pitz (PI) Marco Mehl, Charles K. Westbrook Lawrence Livermore National Laboratory June 17, 2014 DOE National Laboratory Advanced...

  11. Advanced Coal Wind Hybrid: Economic Analysis

    E-Print Network [OSTI]

    Phadke, Amol

    2008-01-01T23:59:59.000Z

    Renewable Energy and Energy Efficiency, DOE. LBNL 275-E Advanced Coal Wind Hybrid:Renewable Energy Laboratory), and Ryan Wiser ( LBNL). i Advanced Coal Wind Hybrid:

  12. Development of Advanced Electrolytes and Electrolyte Additives...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Component R&D within the ABR Program, 2009 thru 2013 Electrolytes - Advanced Electrolyte and Electrolyte Additives Advanced Electrolyte Additives for PHEVEV Lithium-ion Battery...

  13. Advanced Materials for Proton Exchange Membranes | Department...

    Broader source: Energy.gov (indexed) [DOE]

    Advanced Materials for Proton Exchange Membranes Advanced Materials for Proton Exchange Membranes A presentation to the High Temperature Membranes Working Group meeting, May 19,...

  14. ALS Ceramics Materials Research Advances Engine Performance

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ALS Ceramics Materials Research Advances Engine Performance ALS Ceramics Materials Research Advances Engine Performance Print Thursday, 27 September 2012 00:00 ritchie ceramics...

  15. Nick Wright Named Advanced Technologies Group Lead

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Nick Wright Named Advanced Technologies Group Lead Nick Wright Named Advanced Technologies Group Lead February 4, 2013 Nick Nick Wright has been named head of the National Energy...

  16. Advanced Coal Wind Hybrid: Economic Analysis

    E-Print Network [OSTI]

    Phadke, Amol

    2008-01-01T23:59:59.000Z

    of Figures Figure ES-1. Advanced Coal Wind Hybrid: Basicviii Figure 1. Advanced-Coal Wind Hybrid: Basic21 Figure 6. Comparison of ACWH and CCGT-Wind

  17. Advancing Transportation Through Vehicle Electrification - PHEV...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Meeting arravt067vssbazzi2012o.pdf More Documents & Publications Advancing Transportation Through Vehicle Electrification - PHEV Advancing Plug In Hybrid Technology and...

  18. Ecology Action: Small Market Advanced Retrofit Transformation...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Ecology Action: Small Market Advanced Retrofit Transformation Program - 2015 Peer Review Ecology Action: Small Market Advanced Retrofit Transformation Program - 2015 Peer Review...

  19. Advances in understanding solar energy collection materials

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Understanding solar energy collection materials Advances in understanding solar energy collection materials A LANL team and collaborators have made advances in the understanding of...

  20. Advanced Engine Development | ornl.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Advanced Engine Development High-performance computing accelerates advanced engine development July 11, 2014 Oak Ridge National Laboratory's (ORNL's) Dean Edwards and a...

  1. Advanced Hybrid Water Heater using Electrochemical Compressor...

    Energy Savers [EERE]

    Advanced Hybrid Water Heater using Electrochemical Compressor Advanced Hybrid Water Heater using Electrochemical Compressor Xergy is using its Electro Chemical Compression (ECC)...

  2. Advanced Manufacturing Initiative Improves Turbine Blade Productivity...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Advanced Manufacturing Initiative Improves Turbine Blade Productivity Advanced Manufacturing Initiative Improves Turbine Blade Productivity May 20, 2011 - 2:56pm Addthis This is an...

  3. Advanced Natural Gas Reciprocating Engines (ARES) - Presentation...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Cummins, Inc., June 2011 Advanced Natural Gas Reciprocating Engines (ARES) - Presentation by Cummins, Inc., June 2011 Presentation on Advanced Natural Gas Reciprocating Engines...

  4. Advanced Natural Gas Reciprocating Engines (ARES) - Presentation...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Dresser Waukesha, June 2011 Advanced Natural Gas Reciprocating Engines (ARES) - Presentation by Dresser Waukesha, June 2011 Presentation on Advanced Natural Gas Reciprocating...

  5. Advanced Natural Gas Reciprocating Engines (ARES) - Presentation...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Caterpillar, Inc., June 2011 Advanced Natural Gas Reciprocating Engines (ARES) - Presentation by Caterpillar, Inc., June 2011 Presentation on Advanced Natural Gas Reciprocating...

  6. Optimization of Advanced Diesel Engine Combustion Strategies

    Broader source: Energy.gov (indexed) [DOE]

    - UW-ERC 1 "University Research in Advanced Combustion and Emissions Control" Optimization of Advanced Diesel Engine Combustion Strategies Profs. Rolf Reitz, D. Foster, J....

  7. Optimization of Advanced Diesel Engine Combustion Strategies...

    Broader source: Energy.gov (indexed) [DOE]

    Optimization of Advanced Diesel Engine Combustion Strategies Optimization of Advanced Diesel Engine Combustion Strategies 2010 DOE Vehicle Technologies and Hydrogen Programs Annual...

  8. Three Offshore Wind Advanced Technology Demonstration Projects...

    Office of Environmental Management (EM)

    Offshore Wind Advanced Technology Demonstration Projects Receive Phase 2 Funding Three Offshore Wind Advanced Technology Demonstration Projects Receive Phase 2 Funding September...

  9. Advanced Membrane Systems: Recovering Wasteful and Hazardous...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Advanced Membrane Systems: Recovering Wasteful and Hazardous Fuel Vapors at the Gasoline Tank Advanced Membrane Systems: Recovering Wasteful and Hazardous Fuel Vapors at the...

  10. Webinar: Systems Performance Advancement II Funding Opportunity...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Webinar: Systems Performance Advancement II Funding Opportunity Announcement Webinar: Systems Performance Advancement II Funding Opportunity Announcement January 22, 2015 2:00PM to...

  11. Advanced Low Temperature Absorption Chiller Module Integrated...

    Broader source: Energy.gov (indexed) [DOE]

    Advanced Low Temperature Absorption Chiller Module Integrated with a CHP System at a Distributed Data Center - Presentation by Exergy Partners Corp., June 2011 Advanced Low...

  12. Trilinos developers SQE guide : ASC software quality engineering practices.

    SciTech Connect (OSTI)

    Willenbring, James Michael; Heroux, Michael Allen

    2013-05-01T23:59:59.000Z

    The Trilinos Project is an effort to develop algorithms and enabling technologies within an object-oriented software framework for the solution of large-scale, complex multi-physics engineering and scientific problems. A new software capability is introduced into Trilinos as a package. A Trilinos package is an integral unit and, although there are exceptions such as utility packages, each package is typically developed by a small team of experts in a particular algorithms area such as algebraic preconditioners, nonlinear solvers, etc. The Trilinos Developers SQE Guide is a resource for Trilinos package developers who are working under Advanced Simulation and Computing (ASC) and are therefore subject to the ASC Software Quality Engineering Practices as described in the Sandia National Laboratories Advanced Simulation and Computing (ASC) Software Quality Plan: ASC Software Quality Engineering Practices Version 3.0 document [1]. The Trilinos Developer Policies webpage [2] contains a lot of detailed information that is essential for all Trilinos developers. The Trilinos Software Lifecycle Model [3]defines the default lifecycle model for Trilinos packages and provides a context for many of the practices listed in this document.

  13. Deputy Director, Advanced Manufacturing Office

    Broader source: Energy.gov [DOE]

    This position is located in the Advanced Manufacturing Office (AMO), within the Office of Energy Efficiency and Renewable Energy (EERE). EERE leads the U.S. Department of Energy's efforts to...

  14. SERI advanced wind turbine blades

    SciTech Connect (OSTI)

    Tangler, J.; Smith, B.; Jager, D.

    1992-02-01T23:59:59.000Z

    The primary goal of the Solar Energy Research Institute`s (SERI) advanced wind turbine blades is to convert the kinetic energy in the wind into mechanical energy in an inexpensive and efficient manner. To accomplish this goal, advanced wind turbine blades have been developed by SERI that utilize unique airfoil technology. Performance characteristics of the advanced blades were verified through atmospheric testing on fixed-pitch, stall-regulated horizontal-axis wind turbines (HAWTs). Of the various wind turbine configurations, the stall-regulated HAWT dominates the market because of its simplicity and low cost. Results of the atmospheric tests show that the SERI advanced blades produce 10% to 30% more energy than conventional blades. 6 refs.

  15. SERI advanced wind turbine blades

    SciTech Connect (OSTI)

    Tangler, J.; Smith, B.; Jager, D.

    1992-02-01T23:59:59.000Z

    The primary goal of the Solar Energy Research Institute's (SERI) advanced wind turbine blades is to convert the kinetic energy in the wind into mechanical energy in an inexpensive and efficient manner. To accomplish this goal, advanced wind turbine blades have been developed by SERI that utilize unique airfoil technology. Performance characteristics of the advanced blades were verified through atmospheric testing on fixed-pitch, stall-regulated horizontal-axis wind turbines (HAWTs). Of the various wind turbine configurations, the stall-regulated HAWT dominates the market because of its simplicity and low cost. Results of the atmospheric tests show that the SERI advanced blades produce 10% to 30% more energy than conventional blades. 6 refs.

  16. Georgia Power- Advanced Solar Initiative

    Broader source: Energy.gov [DOE]

    Note: According to Georgia Power's website, the Advanced Solar Initiative's final program guidelines are due to be published on June 25th and the bidding period for is expected to open on July 10,...

  17. Ohio Advanced Energy Manufacturing Center

    SciTech Connect (OSTI)

    Kimberly Gibson; Mark Norfolk

    2012-07-30T23:59:59.000Z

    The program goal of the Ohio Advanced Energy Manufacturing Center (OAEMC) is to support advanced energy manufacturing and to create responsive manufacturing clusters that will support the production of advanced energy and energy-efficient products to help ensure the nation's energy and environmental security. This goal cuts across a number of existing industry segments critical to the nation's future. Many of the advanced energy businesses are starting to make the transition from technology development to commercial production. Historically, this transition from laboratory prototypes through initial production for early adopters to full production for mass markets has taken several years. Developing and implementing manufacturing technology to enable production at a price point the market will accept is a key step. Since these start-up operations are configured to advance the technology readiness of the core energy technology, they have neither the expertise nor the resources to address manufacturing readiness issues they encounter as the technology advances toward market entry. Given the economic realities of today's business environment, finding ways to accelerate this transition can make the difference between success and failure for a new product or business. The advanced energy industry touches a wide range of industry segments that are not accustomed to working together in complex supply chains to serve large markets such as automotive and construction. During its first three years, the Center has catalyzed the communication between companies and industry groups that serve the wide range of advanced energy markets. The Center has also found areas of common concern, and worked to help companies address these concerns on a segment or industry basis rather than having each company work to solve common problems individually. EWI worked with three industries through public-private partnerships to sew together disparate segments helping to promote overall industry health. To aid the overall advanced energy industry, EWI developed and launched an Ohio chapter of the non-profit Advanced Energy Economy. In this venture, Ohio joins with six other states including Colorado, Connecticut, Illinois, Maine, Massachusetts, New Hampshire, Rhode Island and Vermont to help promote technologies that deliver energy that is affordable, abundant and secure. In a more specific arena, EWI's advanced energy group collaborated with the EWI-run Nuclear Fabrication Consortium to promote the nuclear supply chain. Through this project EWI has helped bring the supply chain up to date for the upcoming period of construction, and assisted them in understanding the demands for the next generation of facilities now being designed. In a more targeted manner, EWI worked with 115 individual advanced energy companies that are attempting to bring new technology to market. First, these interactions helped EWI develop an awareness of issues common to companies in different advanced energy sectors. By identifying and addressing common issues, EWI helps companies bring technology to market sooner and at a lower cost. These visits also helped EWI develop a picture of industry capability. This helped EWI provide companies with contacts that can supply commercial solutions to their new product development challenges. By providing assistance in developing supply chain partnerships, EWI helped companies bring their technology to market faster and at a lower cost than they might have been able to do by themselves. Finally, at the most granular level EWI performed dedicated research and development on new manufacturing processes for advanced energy. During discussions with companies participating in advanced energy markets, several technology issues that cut across market segments were identified. To address some of these issues, three crosscutting technology development projects were initiated and completed with Center support. This included reversible welds for batteries and high temperature heat exchangers. It also included a novel advanced weld trainer that EWI

  18. February 2000 Advanced Technology Program

    E-Print Network [OSTI]

    of Standards and Technology (NIST) is a cost-sharing program designed to partner the federal governmentFebruary 2000 Advanced Technology Program Information Infrastructure for Healthcare Focused Program: A Brief History ADADVANCEDANCED TECHNOLOGY PRTECHNOLOGY PROGRAMOGRAM NISTIR 6477 National Institute

  19. GEOSCIENCES 585 ADVANCED REMOTE SENSING

    E-Print Network [OSTI]

    Wright, Dawn Jeannine

    . Topics covered include: field methods, field spectroscopy, textural analysis, spectral mixture analysis analysis (3) Perform advanced concepts in digital image processing including texture analysis, atmospheric reasons (e.g. illness, accident, etc.), the instructor will, at her discretion, decide whether

  20. Advancing Measurement of Family Leisure

    E-Print Network [OSTI]

    Melton, Karen

    2014-08-06T23:59:59.000Z

    This study advanced knowledge of the measurement properties of the Family Leisure Activity Profile (FLAP). The FLAP is a sixteen-item index based on the Core and Balance Model of Family Functioning. This study assessed three distinct scaling...

  1. Advanced Process Management and Implementation

    E-Print Network [OSTI]

    Robinson, J.

    Advanced Process Management is a method to achieve optimum process performance during the life cycle of a plant through proper design, effective automation, and adequate operator decision support. Developing a quality process model is an effective...

  2. Recent advances in hydraulic fracturing

    SciTech Connect (OSTI)

    Gidley, J.L.

    1989-01-01T23:59:59.000Z

    This book is a reference to the application of significant technological advances in hydraulic fracturing. It features illustrative problems to demonstrate specific applications of advanced technologies. Chapters examine pretreatment formation evaluation, rock mechanics and fracture geometry, 2D and 3D fracture-propagation models, propping agents and fracture conductivity, fracturing fluids and additives, fluid leakoff, flow behavior, proppant transport, treatment design, well completions, field implementation, fracturing-pressure analysis, postfracture formation evaluation, fracture azimuth and geometry determination, and economics of fracturing.

  3. Permitting Best Practices Make Installing Solar Easier: Technical Assistance (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2013-01-01T23:59:59.000Z

    NREL's deployment and market transformation activities encompass the laboratory's full range of technologies, which span the energy efficiency and renewable energy spectrum. This fact sheet educates partners on how they can advance sustainable energy applications and also provide clients with best practices for reducing barriers to innovation and market transformation.

  4. Practical Parallel SimulationApplied to Aviation Modeling Dr. Frederick Wieland

    E-Print Network [OSTI]

    Tropper, Carl

    Federal Aviation Administration (FAA) has itself performed a detailed validation study of DPAT [3Practical Parallel SimulationApplied to Aviation Modeling Dr. Frederick Wieland Centerfor Advanced Aviation Systems Development The MITRE Corporation 1820 Dolley Madison Dr., McLean, VA22102 fwieland

  5. 330: 519 Advanced Topics in Systems Engineering, Spring 1997 Kalman Filtering

    E-Print Network [OSTI]

    Gajic, Zoran

    330: 519 Advanced Topics in Systems Engineering, Spring 1997 Kalman Filtering Instructor: Zoran, Kalman Filtering: Theory and Practice, Prentice Hall, Englewood Cliffs, 1993 Office Hours: After: Introduction to Kalman Filtering and Linear Dynamic Systems (Chapters 1 and 2) Week 2: Review of Probability

  6. Web Unit Mining Finding and Classifying Subgraphs of Centre for Advanced Information Systems

    E-Print Network [OSTI]

    Aixin, Sun

    Web Unit Mining ­ Finding and Classifying Subgraphs of Web Pages Aixin Sun Centre for Advanced Technological University Singapore, 639798 aseplim@ntu.edu.sg ABSTRACT In web classification, most researchers assume that the ob- jects to classify are individual web pages from one or more web sites. In practice

  7. ADVANCED INORGANIC LABORATORY FALL 2008 CHEMISTRY 410 (CRN 11299:), CHEMISTRY 510 (CRN 11315)

    E-Print Network [OSTI]

    Richmond, Geraldine L.

    materials and announcements will be posted on the site. Required Text: "Synthesis and Technique in InorganicADVANCED INORGANIC LABORATORY ­ FALL 2008 CHEMISTRY 410 (CRN 11299:), CHEMISTRY 510 (CRN 11315 to a wide range of conceptual and practical (laboratory) inorganic chemistry. Because of the introductory

  8. LSUHSC-NO Academy for the Advancement of Educational Scholarship Member Profile

    E-Print Network [OSTI]

    LSUHSC-NO Academy for the Advancement of Educational Scholarship Member Profile Angela C. Johnson, M.D. Academy Fellow Assistant Professor of Clinical Medicine Department of Internal Medicine School incorporated into the practice of medicine. Last Update: 5/5/10 Educational Domains Represented in Academy

  9. Advanced modeling and simulation to design and manufacture high performance and reliable advanced microelectronics and microsystems.

    SciTech Connect (OSTI)

    Nettleship, Ian (University of Pittsburgh, Pittsburgh, PA); Hinklin, Thomas; Holcomb, David Joseph; Tandon, Rajan; Arguello, Jose Guadalupe, Jr. (,; .); Dempsey, James Franklin; Ewsuk, Kevin Gregory; Neilsen, Michael K.; Lanagan, Michael (Pennsylvania State University, University Park, PA)

    2007-07-01T23:59:59.000Z

    An interdisciplinary team of scientists and engineers having broad expertise in materials processing and properties, materials characterization, and computational mechanics was assembled to develop science-based modeling/simulation technology to design and reproducibly manufacture high performance and reliable, complex microelectronics and microsystems. The team's efforts focused on defining and developing a science-based infrastructure to enable predictive compaction, sintering, stress, and thermomechanical modeling in ''real systems'', including: (1) developing techniques to and determining materials properties and constitutive behavior required for modeling; (2) developing new, improved/updated models and modeling capabilities, (3) ensuring that models are representative of the physical phenomena being simulated; and (4) assessing existing modeling capabilities to identify advances necessary to facilitate the practical application of Sandia's predictive modeling technology.

  10. Advanced Battery Manufacturing (VA)

    SciTech Connect (OSTI)

    Stratton, Jeremy

    2012-09-30T23:59:59.000Z

    LiFeBATT has concentrated its recent testing and evaluation on the safety of its batteries. There appears to be a good margin of safety with respect to overheating of the cells and the cases being utilized for the batteries are specifically designed to dissipate any heat built up during charging. This aspect of LiFeBATT’s products will be even more fully investigated, and assuming ongoing positive results, it will become a major component of marketing efforts for the batteries. LiFeBATT has continued to receive prismatic 20 Amp hour cells from Taiwan. Further testing continues to indicate significant advantages over the previously available 15 Ah cells. Battery packs are being assembled with battery management systems in the Danville facility. Comprehensive tests are underway at Sandia National Laboratory to provide further documentation of the advantages of these 20 Ah cells. The company is pursuing its work with Hybrid Vehicles of Danville to critically evaluate the 20 Ah cells in a hybrid, armored vehicle being developed for military and security applications. Results have been even more encouraging than they were initially. LiFeBATT is expanding its work with several OEM customers to build a worldwide distribution network. These customers include a major automotive consulting group in the U.K., an Australian maker of luxury off-road campers, and a number of makers of E-bikes and scooters. LiFeBATT continues to explore the possibility of working with nations that are woefully short of infrastructure. Negotiations are underway with Siemens to jointly develop a system for using photovoltaic generation and battery storage to supply electricity to communities that are not currently served adequately. The IDA has continued to monitor the progress of LiFeBATT’s work to ensure that all funds are being expended wisely and that matching funds will be generated as promised. The company has also remained current on all obligations for repayment of an IDA loan and lease payments for space to the IDA. A commercial venture is being formed to utilize the LiFeBATT product for consumer use in enabling photovoltaic powered boat lifts. Field tests of the system have proven to be very effective and commercially promising. This venture is expected to result in significant sales within the next six months.

  11. Best management practices plan for the Lower East Fork Poplar Creek Operable Unit, Oak Ridge, Tennessee

    SciTech Connect (OSTI)

    NONE

    1996-04-01T23:59:59.000Z

    This plan was prepared in support of the Phase II Remedial Design Report (DOE/OR/01-1449&D1) and in accordance with requirements under CERCLA to present the plan for best management practices to be followed during the remediation. This document provides the Environmental Restoration Program with information about spill prevention and control, water quality monitoring, good housekeeping practices, sediment and erosion control measures, and inspections and environmental compliance practices to be used during Phase II of the remediation project for the Lower East Fork Poplar Creek Operable Unit.

  12. Advanced Metering Implementations - A Perspective from Federal Sector

    SciTech Connect (OSTI)

    Eaarni, Shankar

    2014-08-11T23:59:59.000Z

    Federal mandate (EPACT 2005) requires that federal buildings install advanced electrical meters-meters capable of providing data at least daily and measuring the consumption of electricity at least hourly. This work presents selected advanced metering implementations to understand some of the existing practices related to data capture and to understand how the data is being translated into information and knowledge that can be used to improve building energy and operational performance to meet federal energy reduction mandates. This study highlights case studies to represent some of the various actions that are being taken based on the data that are being collected to improve overall energy performance of these buildings. Some of these actions include- individualized tenant billing and energy forecasting, benchmarking, identifying energy conservation measures, measurement and verification.

  13. General Relativity Problem of Mercury's Perihelion Advance Revisited

    E-Print Network [OSTI]

    Vankov, Anatoli A

    2010-01-01T23:59:59.000Z

    The work is devoted to the critical analysis of theoretical prediction and astronomical observation of GR effects, first of all, the Mercury's perihelion advance. In the first part, the methodological issues of observations are discussed including a practice of observations, a method of recognizing the relativistic properties of the effect and recovering it from bulk of raw data, a parametric observational model, and finally, methods of assessment of the effect value and statistical level of confidence. In the second part, the Mercury's perihelion advance and other theoretical problems are discussed in relationship with the GR physical foundations. Controversies in literature devoted to the GR tests are analyzed. The unified GR approach to particles and photons is discussed with the emphasis on the GR classical tests. Finally, the alternative theory of relativistic effect treatment is presented.

  14. General Relativity Problem of Mercury's Perihelion Advance Revisited

    E-Print Network [OSTI]

    Anatoli A. Vankov

    2010-08-10T23:59:59.000Z

    The work is devoted to the critical analysis of theoretical prediction and astronomical observation of GR effects, first of all, the Mercury's perihelion advance. In the first part, the methodological issues of observations are discussed including a practice of observations, a method of recognizing the relativistic properties of the effect and recovering it from bulk of raw data, a parametric observational model, and finally, methods of assessment of the effect value and statistical level of confidence. In the second part, the Mercury's perihelion advance and other theoretical problems are discussed in relationship with the GR physical foundations. Controversies in literature devoted to the GR tests are analyzed. The unified GR approach to particles and photons is discussed with the emphasis on the GR classical tests. Finally, the alternative theory of relativistic effect treatment is presented.

  15. ADVANCED CUTTINGS TRANSPORT STUDY

    SciTech Connect (OSTI)

    Stefan Miska; Troy Reed; Ergun Kuru

    2004-09-30T23:59:59.000Z

    The Advanced Cuttings Transport Study (ACTS) was a 5-year JIP project undertaken at the University of Tulsa (TU). The project was sponsored by the U.S. Department of Energy (DOE) and JIP member companies. The objectives of the project were: (1) to develop and construct a new research facility that would allow three-phase (gas, liquid and cuttings) flow experiments under ambient and EPET (elevated pressure and temperature) conditions, and at different angle of inclinations and drill pipe rotation speeds; (2) to conduct experiments and develop a data base for the industry and academia; and (3) to develop mechanistic models for optimization of drilling hydraulics and cuttings transport. This project consisted of research studies, flow loop construction and instrumentation development. Following a one-year period for basic flow loop construction, a proposal was submitted by TU to the DOE for a five-year project that was organized in such a manner as to provide a logical progression of research experiments as well as additions to the basic flow loop. The flow loop additions and improvements included: (1) elevated temperature capability; (2) two-phase (gas and liquid, foam etc.) capability; (3) cuttings injection and removal system; (4) drill pipe rotation system; and (5) drilling section elevation system. In parallel with the flow loop construction, hydraulics and cuttings transport studies were preformed using drilling foams and aerated muds. In addition, hydraulics and rheology of synthetic drilling fluids were investigated. The studies were performed under ambient and EPET conditions. The effects of temperature and pressure on the hydraulics and cuttings transport were investigated. Mechanistic models were developed to predict frictional pressure loss and cuttings transport in horizontal and near-horizontal configurations. Model predictions were compared with the measured data. Predominantly, model predictions show satisfactory agreements with the measured data. As a part of this project, instrumentation was developed to monitor cuttings beds and characterize foams in the flow loop. An ultrasonic-based monitoring system was developed to measure cuttings bed thickness in the flow loop. Data acquisition software controls the system and processes the data. Two foam generating devices were designed and developed to produce foams with specified quality and texture. The devices are equipped with a bubble recognition system and an in-line viscometer to measure bubble size distribution and foam rheology, respectively. The 5-year project is completed. Future research activities will be under the umbrella of Tulsa University Drilling Research Projects. Currently the flow loop is being used for testing cuttings transport capacity of aqueous and polymer-based foams under elevated pressure and temperature conditions. Subsequently, the effect of viscous sweeps on cuttings transport under elevated pressure and temperature conditions will be investigated using the flow loop. Other projects will follow now that the ''steady state'' phase of the project has been achieved.

  16. ADVANCED WORKER PROTECTION SYSTEM

    SciTech Connect (OSTI)

    Judson Hedgehock

    2001-03-16T23:59:59.000Z

    From 1993 to 2000, OSS worked under a cost share contract from the Department of Energy (DOE) to develop an Advanced Worker Protection System (AWPS). The AWPS is a protective ensemble that provides the user with both breathing air and cooling for a NIOSH-rated duration of two hours. The ensemble consists of a liquid air based backpack, a Liquid Cooling Garment (LCG), and an outer protective garment. The AWPS project was divided into two phases. During Phase 1, OSS developed and tested a full-scale prototype AWPS. The testing showed that workers using the AWPS could work twice as long as workers using a standard SCBA. The testing also provided performance data on the AWPS in different environments that was used during Phase 2 to optimize the design. During Phase 1, OSS also performed a life-cycle cost analysis on a representative clean up effort. The analysis indicated that the AWPS could save the DOE millions of dollars on D and D activities and improve the health and safety of their workers. During Phase 2, OSS worked to optimize the AWPS design to increase system reliability, to improve system performance and comfort, and to reduce the backpack weight and manufacturing costs. To support this design effort, OSS developed and tested several different generations of prototype units. Two separate successful evaluations of the ensemble were performed by the International Union of Operation Engineers (IUOE). The results of these evaluations were used to drive the design. During Phase 2, OSS also pursued certifying the AWPS with the applicable government agencies. The initial intent during Phase 2 was to finalize the design and then to certify the system. OSS and Scott Health and Safety Products teamed to optimize the AWPS design and then certify the system with the National Institute of Occupational Health and Safety (NIOSH). Unfortunately, technical and programmatic difficulties prevented us from obtaining NIOSH certification. Despite the inability of NIOSH to certify the design, OSS was able to develop and successfully test, in both the lab and in the field, a prototype AWPS. They clearly demonstrated that a system which provides cooling can significantly increase worker productivity by extending the time they can function in a protective garment. They were also able to develop mature outer garment and LCG designs that provide considerable benefits over current protective equipment, such as self donning and doffing, better visibility, and machine washable. A thorough discussion of the activities performed during Phase 1 and Phase 2 is presented in the AWPS Final Report. The report also describes the current system design, outlines the steps needed to certify the AWPS, discusses the technical and programmatic issues that prevented the system from being certified, and presents conclusions and recommendations based upon the seven year effort.

  17. Advanced Integrated Traction System

    SciTech Connect (OSTI)

    Greg Smith; Charles Gough

    2011-08-31T23:59:59.000Z

    The United States Department of Energy elaborates the compelling need for a commercialized competitively priced electric traction drive system to proliferate the acceptance of HEVs, PHEVs, and FCVs in the market. The desired end result is a technically and commercially verified integrated ETS (Electric Traction System) product design that can be manufactured and distributed through a broad network of competitive suppliers to all auto manufacturers. The objectives of this FCVT program are to develop advanced technologies for an integrated ETS capable of 55kW peak power for 18 seconds and 30kW of continuous power. Additionally, to accommodate a variety of automotive platforms the ETS design should be scalable to 120kW peak power for 18 seconds and 65kW of continuous power. The ETS (exclusive of the DC/DC Converter) is to cost no more than $660 (55kW at $12/kW) to produce in quantities of 100,000 units per year, should have a total weight less than 46kg, and have a volume less than 16 liters. The cost target for the optional Bi-Directional DC/DC Converter is $375. The goal is to achieve these targets with the use of engine coolant at a nominal temperature of 105C. The system efficiency should exceed 90% at 20% of rated torque over 10% to 100% of maximum speed. The nominal operating system voltage is to be 325V, with consideration for higher voltages. This project investigated a wide range of technologies, including ETS topologies, components, and interconnects. Each technology and its validity for automotive use were verified and then these technologies were integrated into a high temperature ETS design that would support a wide variety of applications (fuel cell, hybrids, electrics, and plug-ins). This ETS met all the DOE 2010 objectives of cost, weight, volume and efficiency, and the specific power and power density 2015 objectives. Additionally a bi-directional converter was developed that provides charging and electric power take-off which is the first step towards enabling a smart-grid application. GM under this work assessed 29 technologies; investigated 36 configurations/types power electronics and electric machines, filed 41 invention disclosures; and ensured technology compatibility with vehicle production. Besides the development of a high temperature ETS the development of industrial suppliers took place because of this project. Suppliers of industrial power electronic components are numerous, but there are few that have traction drive knowledge. This makes it difficult to achieve component reliability, durability, and cost requirements necessary of high volume automotive production. The commercialization of electric traction systems for automotive industry requires a strong diverse supplier base. Developing this supplier base is dependent on a close working relationship between the OEM and supplier so that appropriate component requirements can be developed. GM has worked closely with suppliers to develop components for electric traction systems. Components that have been the focus of this project are power modules, capacitors, heavy copper boards, current sensors, and gate drive and controller chip sets. Working with suppliers, detailed component specifications have been developed. Current, voltage, and operation environment during the vehicle drive cycle were evaluated to develop higher resolution/accurate component specifications.

  18. Advanced Microturbine Systems

    SciTech Connect (OSTI)

    Rosfjord, T; Tredway, W; Chen, A; Mulugeta, J; Bhatia, T

    2008-12-31T23:59:59.000Z

    In July 2000, the United Technologies Research Center (UTRC) was one of five recipients of a US Department of Energy contract under the Advanced Microturbine System (AMS) program managed by the Office of Distributed Energy (DE). The AMS program resulted from several government-industry workshops that recognized that microturbine systems could play an important role in improving customer choice and value for electrical power. That is, the group believed that electrical power could be delivered to customers more efficiently and reliably than the grid if an effective distributed energy strategy was followed. Further, the production of this distributed power would be accomplished with less undesirable pollutants of nitric oxides (NOx) unburned hydrocarbons (UHC), and carbon monoxide (CO). In 2000, the electrical grid delivered energy to US customers at a national average of approximately 32% efficiency. This value reflects a wide range of powerplants, but is dominated by older, coal burning stations that provide approximately 50% of US electrical power. The grid efficiency is also affected by transmission and distribution (T&D) line losses that can be significant during peak power usage. In some locations this loss is estimated to be 15%. Load pockets can also be so constrained that sufficient power cannot be transmitted without requiring the installation of new wires. New T&D can be very expensive and challenging as it is often required in populated regions that do not want above ground wires. While historically grid reliability has satisfied most customers, increasing electronic transactions and the computer-controlled processes of the 'digital economy' demand higher reliability. For them, power outages can be very costly because of transaction, work-in-progress, or perishable commodity losses. Powerplants that produce the grid electrical power emit significant levels of undesirable NOx, UHC, and CO pollutants. The level of emission is quoted as either a technology metric or a system-output metric. A common form for the technology metric is in the units of PPM {at} 15% O2. In this case the metric reflects the molar fraction of the pollutant in the powerplant exhaust when corrected to a standard exhaust condition as containing 15% (molar) oxygen, assuring that the PPM concentrations are not altered by subsequent air addition or dilution. Since fuel combustion consumes oxygen, the output oxygen reference is equivalent to a fuel input reference. Hence, this technology metric reflects the moles of pollutant per mole of fuel input, but not the useful output of the powerplant-i.e. the power. The system-output metric does embrace the useful output and is often termed an output-based metric. A common form for the output-based metric is in the units of lb/MWh. This is a system metric relating the pounds of pollutant to output energy (e.g., MWh) of the powerplant.

  19. The optimal suppression of a low-cost technology by a durable-good monopoly

    E-Print Network [OSTI]

    Karp, Larry; Perloff, Jeffrey M

    1994-01-01T23:59:59.000Z

    SUPPRESSION OF A LOW-COST TECHNOLOGY BY A DURABLE-GOODsuppression of a low-cost technology by a durable-goodSuppression of a Low-Cost Technology by a Durable-Good

  20. Effects of purchase and presentation order on the valuation of physical and digital good bundles

    E-Print Network [OSTI]

    Duan, Tianzhou

    2014-01-01T23:59:59.000Z

    Many digital goods also come on physical mediums, such as movies and games on discs. We investigate how the order of purchase (buying a digital copy of a good already owned in physical form or vice versa) and order of ...

  1. Strategy for advancement of IRP in public power, Volume 1: IRP advancement strategy

    SciTech Connect (OSTI)

    Garrick, C.J. [Garrick & Associates, Morrison, CO (United States)

    1995-10-01T23:59:59.000Z

    The nation`s 3,000 publicly and cooperatively owned utilities have a documented need for assistance in integrated resource planning (IRP) and related strategic business planning practices. The availability of appropriate and sufficient assistance will be an important factor influencing the ability of these utilities to face the challenges and opportunities of today`s competitive electric utility environment. The U.S. Department of Energy (DOE) actively supports IRP advancement in the investor-owned utility (IOU) sector. This is accomplished through multiple vehicles, including grant funding to the state energy offices, to the National Conference of State Legislatures (NCSL), and to the National Association of Regulatory Utility Commissioners (NARUC). However, public utilities typically are not impacted by these DOE efforts. As consumer-controlled organizations, many publicly and cooperatively owned utilities are not regulated by state public utility commissions (PUCs). To advance IRP as an essential approach for publicly and cooperatively owned utility operation in a drastically changing industry, DOE must develop additional vehicles of assistance, including the federal power agencies and key industry organizations such as the American Public Power Association (APPA) and the National Rural Electric Cooperatives Association (NRECA).

  2. ADVANCED MIXING MODELS

    SciTech Connect (OSTI)

    Lee, S.; Dimenna, R.; Tamburello, D.

    2011-02-14T23:59:59.000Z

    The process of recovering and processing High Level Waste (HLW) the waste in storage tanks at the Savannah River Site (SRS) typically requires mixing the contents of the tank with one to four mixers (pumps) located within the tank. The typical criteria to establish a mixed condition in a tank are based on the number of pumps in operation and the time duration of operation. To ensure that a mixed condition is achieved, operating times are typically set conservatively long. This approach results in high operational costs because of the long mixing times and high maintenance and repair costs for the same reason. A significant reduction in both of these costs might be realized by reducing the required mixing time based on calculating a reliable indicator of mixing with a suitably validated computer code. The focus of the present work is to establish mixing criteria applicable to miscible fluids, with an ultimate goal of addressing waste processing in HLW tanks at SRS and quantifying the mixing time required to suspend sludge particles with the submersible jet pump. A single-phase computational fluid dynamics (CFD) approach was taken for the analysis of jet flow patterns with an emphasis on the velocity decay and the turbulent flow evolution for the farfield region from the pump. Literature results for a turbulent jet flow are reviewed, since the decay of the axial jet velocity and the evolution of the jet flow patterns are important phenomena affecting sludge suspension and mixing operations. The work described in this report suggests a basis for further development of the theory leading to the identified mixing indicators, with benchmark analyses demonstrating their consistency with widely accepted correlations. Although the indicators are somewhat generic in nature, they are applied to Savannah River Site (SRS) waste tanks to provide a better, physically based estimate of the required mixing time. Waste storage tanks at SRS contain settled sludge which varies in height from zero to 10 ft. The sludge has been characterized and modeled as micron-sized solids, typically 1 to 5 microns, at weight fractions as high as 20 to 30 wt%, specific gravities to 1.4, and viscosities up to 64 cp during motion. The sludge is suspended and mixed through the use of submersible slurry jet pumps. To suspend settled sludge, water is added to the tank as a slurry medium and stirred with the jet pump. Although there is considerable technical literature on mixing and solid suspension in agitated tanks, very little literature has been published on jet mixing in a large-scale tank. One of the main objectives in the waste processing is to provide feed of a uniform slurry composition at a certain weight percentage (e.g. typically {approx}13 wt% at SRS) over an extended period of time. In preparation of the sludge for slurrying, several important questions have been raised with regard to sludge suspension and mixing of the solid suspension in the bulk of the tank: (1) How much time is required to prepare a slurry with a uniform solid composition? (2) How long will it take to suspend and mix the sludge for uniform composition in any particular waste tank? (3) What are good mixing indicators to answer the questions concerning sludge mixing stated above in a general fashion applicable to any waste tank/slurry pump geometry and fluid/sludge combination?

  3. Specification of advanced safety modeling requirements (Rev. 0).

    SciTech Connect (OSTI)

    Fanning, T. H.; Tautges, T. J.

    2008-06-30T23:59:59.000Z

    The U.S. Department of Energy's Global Nuclear Energy Partnership has lead to renewed interest in liquid-metal-cooled fast reactors for the purpose of closing the nuclear fuel cycle and making more efficient use of future repository capacity. However, the U.S. has not designed or constructed a fast reactor in nearly 30 years. Accurate, high-fidelity, whole-plant dynamics safety simulations will play a crucial role by providing confidence that component and system designs will satisfy established design limits and safety margins under a wide variety of operational, design basis, and beyond design basis transient conditions. Current modeling capabilities for fast reactor safety analyses have resulted from several hundred person-years of code development effort supported by experimental validation. The broad spectrum of mechanistic and phenomenological models that have been developed represent an enormous amount of institutional knowledge that needs to be maintained. Complicating this, the existing code architectures for safety modeling evolved from programming practices of the 1970s. This has lead to monolithic applications with interdependent data models which require significant knowledge of the complexities of the entire code in order for each component to be maintained. In order to develop an advanced fast reactor safety modeling capability, the limitations of the existing code architecture must be overcome while preserving the capabilities that already exist. To accomplish this, a set of advanced safety modeling requirements is defined, based on modern programming practices, that focuses on modular development within a flexible coupling framework. An approach for integrating the existing capabilities of the SAS4A/SASSYS-1 fast reactor safety analysis code into the SHARP framework is provided in order to preserve existing capabilities while providing a smooth transition to advanced modeling capabilities. In doing this, the advanced fast reactor safety models will target leadership-class computing architectures for massively-parallel high-fidelity computations while providing continued support for rapid prototyping using modest fidelity computations on multiple-core desktop platforms.

  4. Industry and the APS | Advanced Photon Source

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    important applications, including advances in manufacturing, information technology, nanotechnology, pharmaceuticals, biomedicine, oil and gas, transportation, agriculture,...

  5. ABPDU - Advanced Biofuels Process Demonstration Unit

    SciTech Connect (OSTI)

    None

    2011-01-01T23:59:59.000Z

    Lawrence Berkeley National Lab opened its Advanced Biofuels Process Demonstration Unit on Aug. 18, 2011.

  6. WORKING PAPER N 2008 -52 Trade in services and trade in goods

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    WORKING PAPER N° 2008 - 52 Trade in services and trade in goods: Differences and complementarities Carolina Lennon JEL Codes: F12, F15, L8 Keywords: International trade in services, trade in goods, gravity ­ ÉCOLE NORMALE SUPÉRIEURE halshs-00586223,version1-15Apr2011 #12;Trade in Services and Trade in Goods

  7. Dangerous Goods Shipping Federal and international shipping rules require that anyone wishing to ship biological materials,

    E-Print Network [OSTI]

    Jiang, Huiqiang

    Dangerous Goods Shipping Federal and international shipping rules require that anyone wishing to ship biological materials, infectious substances, or dry ice must complete training in Dangerous Goods. In order to receive the required certification for shipping Dangerous Goods, you must: 1. Review

  8. Proper pond management practices should always start with an assessment and inspection of the

    E-Print Network [OSTI]

    Boyer, Elizabeth W.

    1 Proper pond management practices should always start with an assessment and inspection that collects surface runoff from the surrounding land. College of Agricultural Sciences · Cooperative Extension source, it is a good idea to establish a buffer strip of vegetation around the pond to trap sediment

  9. Decision-theoretic consideration of robust hashing: link to practical algorithms

    E-Print Network [OSTI]

    Genève, Université de

    of digital and analog content as well as goods and products justifying an urgent need for reliable document privacy as well as universality to provide asymptotic independence to a complete or partial lack of priorDecision-theoretic consideration of robust hashing: link to practical algorithms Oleksiy Koval

  10. Attic or Roof? An Evaluation of Two Advanced Weatherization Packages

    SciTech Connect (OSTI)

    Neuhauser, K.

    2012-06-01T23:59:59.000Z

    This project examines implementation of advanced retrofit measures in the context of a large-scale weatherization program and the archetypal Chicago brick bungalow. One strategy applies best practice air sealing methods and a standard insulation method to the attic floor. The other strategy creates an unvented roof assembly using materials and methods typically available to weatherization contractors. Through implementations of the retrofit strategies in a total of eight (8) test homes, the research found that the two different strategies achieve similar reductions in air leakage measurement (55%) and predicted energy performance (18%) relative to the pre-retrofit conditions.

  11. Implementation of Boiler Best Practices

    E-Print Network [OSTI]

    Blake, N. R.

    Boilers are an essential part of any industrial plant, and their efficient, economical operation can significantly affect the reliability and profitability of the entire plant. Best Practices for Boilers include tools to determine where a plant...

  12. National Training and Education Resource Advanced Authoring Training

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Advanced Authoring Training Participant Guide NTER Advanced Authoring Training Participant Guide (032012 pw) 2 Contents OBJECTIVES ......

  13. Energy Efficiency Best Practice Guide©

    E-Print Network [OSTI]

    Rouse, S.

    ENERGY EFFICIENCY BEST PRACTICE GUIDE@ Scott Rouse Manager Energy Efficiency Department Ontario Power Generation Inc. Toronto, Ontario, Canada (416) 592-8044 srouse@ontariopowergeneration.com ABSTRACT 'Setting the bar above mere... mediocrity!' The goal of the Energy Efficiency (EE) Best Practice Guide is to help business units meet and exceed their energy efficiency targets through continuous improvement using seven key criteria. The objectives are threefold: - to provide an easy...

  14. Advanced Manufacture of Reflectors

    SciTech Connect (OSTI)

    Angel, Roger [University of Arizona

    2014-12-17T23:59:59.000Z

    The main project objective has been to develop an advanced gravity sag method for molding large glass solar reflectors with either line or point focus, and with long or short focal length. The method involves taking standard sized squares of glass, 1.65 m x 1.65 m, and shaping them by gravity sag into precision steel molds. The method is designed for high volume manufacture when incorporated into a production line with separate pre-heating and cooling. The performance objectives for the self-supporting glass mirrors made by this project include mirror optical accuracy of 2 mrad root mean square (RMS), requiring surface slope errors <1 mrad rms, a target not met by current production of solar reflectors. Our objective also included development of new methods for rapidly shaping glass mirrors and coating them for higher reflectivity and soil resistance. Reflectivity of 95% for a glass mirror with anti-soil coating was targeted, compared to the present ~94% with no anti-soil coating. Our mirror cost objective is ~$20/m2 in 2020, a significant reduction compared to the present ~$35/m2 for solar trough mirrors produced for trough solar plants. During the first year a custom batch furnace was built to develop the method with high power radiative heating to simulate transfer of glass into a hot slumping zone in a production line. To preserve the original high polish of the float glass on both front and back surfaces, as required for a second surface mirror, the mold surface is machined to the required shape as grooves which intersect the glass at cusps, reducing the mold contact area to significantly less than 1%. The mold surface is gold-plated to reflect thermal radiation. Optical metrology of glass replicas made with the system has been carried out with a novel, custom-built test system. This test provides collimated, vertically-oriented parallel beams from a linear array of co-aligned lasers translated in a perpendicular direction across the reflector. Deviations of each reflected beam from the paraboloid focus give a direct measure of surface slope error. Key findings • A gravity sag method for large (2.5 m2) second surface glass solar reflectors has been developed and demonstrated to a uniquely high level of accuracy. Mirror surface slope accuracy of 0.65 mrad in one dimension, 0.85 mrad in 2 dimensions (point focus) has been demonstrated by commercial partner REhnu using this process. This accuracy exceeds by a factor of two current solar reflector accuracy. Our replicas meet the Sunshot accuracy objective of 2 mrad optical, which requires better than 1 mrad rms slope error. • Point-focus as well as line-focus mirrors have been demonstrated at 1.65 m x 1.65 m square – a unique capability. • The new process using simple molds is economical. The molds for the 1.65 m square reflectors are bent and machined steel plates on a counter-weighted flotation support. To minimize thermal coupling by radiative heat transfer, the mold surface is grooved and gilded. The molds are simple to manufacture, and have minimal thermal stresses and distortion in use. Lapping and bending techniques have been developed to obtain better than 1 mrad rms surface mold accuracy. Float glass is sagged into the molds by rapid radiative heating, using a custom high power (350 kW) furnace. The method of manufacture is well suited for small as well as large volume production, and as it requires little capital investment and no high technology, it could be used anywhere in the world to make solar concentrating reflectors. • A novel slope metrology method for full 1.65 aperture has been demonstrated, with 25 mm resolution across the face of the replicas. The method is null and therefore inherently accurate: it can easily be reproduced without high-tech equipment and does not need sophisticated calibration. We find by cross calibration with reference trough reflectors from RioGlass that our null-test laser system yields a measurement accuracy better than 0.4 mrad rms slope error. Our system is inexpensive and could have broad application for test

  15. ADVANCED MIXING MODELS

    SciTech Connect (OSTI)

    Lee, S; Richard Dimenna, R; David Tamburello, D

    2008-11-13T23:59:59.000Z

    The process of recovering the waste in storage tanks at the Savannah River Site (SRS) typically requires mixing the contents of the tank with one to four dual-nozzle jet mixers located within the tank. The typical criteria to establish a mixed condition in a tank are based on the number of pumps in operation and the time duration of operation. To ensure that a mixed condition is achieved, operating times are set conservatively long. This approach results in high operational costs because of the long mixing times and high maintenance and repair costs for the same reason. A significant reduction in both of these costs might be realized by reducing the required mixing time based on calculating a reliable indicator of mixing with a suitably validated computer code. The work described in this report establishes the basis for further development of the theory leading to the identified mixing indicators, the benchmark analyses demonstrating their consistency with widely accepted correlations, and the application of those indicators to SRS waste tanks to provide a better, physically based estimate of the required mixing time. Waste storage tanks at SRS contain settled sludge which varies in height from zero to 10 ft. The sludge has been characterized and modeled as micron-sized solids, typically 1 to 5 microns, at weight fractions as high as 20 to 30 wt%, specific gravities to 1.4, and viscosities up to 64 cp during motion. The sludge is suspended and mixed through the use of submersible slurry jet pumps. To suspend settled sludge, water is added to the tank as a slurry medium and stirred with the jet pump. Although there is considerable technical literature on mixing and solid suspension in agitated tanks, very little literature has been published on jet mixing in a large-scale tank. If shorter mixing times can be shown to support Defense Waste Processing Facility (DWPF) or other feed requirements, longer pump lifetimes can be achieved with associated operational cost and schedule savings. The focus of the present work is to establish mixing criteria associated with the waste processing at SRS and to quantify the mixing time required to suspend sludge particles with the submersible jet pump. Literature results for a turbulent jet flow are reviewed briefly, since the decay of the axial jet velocity and the evolution of the jet flow patterns are important phenomena affecting sludge suspension and mixing operations. One of the main objectives in the waste processing is to provide the DWPF a uniform slurry composition at a certain weight percentage (typically {approx}13 wt%) over an extended period of time. In preparation of the sludge for slurrying to DWPF, several important questions have been raised with regard to sludge suspension and mixing of the solid suspension in the bulk of the tank: (1) How much time is required to prepare a slurry with a uniform solid composition for DWPF? (2) How long will it take to suspend and mix the sludge for uniform composition in any particular waste tank? (3) What are good mixing indicators to answer the questions concerning sludge mixing stated above in a general fashion applicable to any waste tank/slurry pump geometry and fluid/sludge combination? Grenville and Tilton (1996) investigated the mixing process by giving a pulse of tracer (electrolyte) through the submersible jet nozzle and by monitoring the conductivity at three locations within the cylindrical tank. They proposed that the mixing process was controlled by the turbulent kinetic energy dissipation rate in the region far away from the jet entrance. They took the energy dissipation rates in the regions remote from the nozzle to be proportional to jet velocity and jet diameter at that location. The reduction in the jet velocity was taken to be proportional to the nozzle velocity and distance from the nozzle. Based on their analysis, a correlation was proposed. The proposed correlation was shown to be valid over a wide range of Reynolds numbers (50,000 to 300,000) with a relative standard deviation of {+-} 11.83%. An improved correlat

  16. Process for producing advanced ceramics

    DOE Patents [OSTI]

    Kwong, Kyei-Sing (Tuscaloosa, AL)

    1996-01-01T23:59:59.000Z

    A process for the synthesis of homogeneous advanced ceramics such as SiC+AlN, SiAlON, SiC+Al.sub.2 O.sub.3, and Si.sub.3 N.sub.4 +AlN from natural clays such as kaolin, halloysite and montmorillonite by an intercalation and heat treatment method. Included are the steps of refining clays, intercalating organic compounds into the layered structure of clays, drying the intercalated mixture, firing the treated atmospheres and grinding the loosely agglomerated structure. Advanced ceramics produced by this procedure have the advantages of homogeneity, cost effectiveness, simplicity of manufacture, ease of grind and a short process time. Advanced ceramics produced by this process can be used for refractory, wear part and structure ceramics.

  17. Best Practices Implementation for Hydropower Efficiency and Utilization Improvement

    SciTech Connect (OSTI)

    Smith, Brennan T [ORNL] [ORNL; Zhang, Qin Fen [ORNL] [ORNL; March, Patrick [Hydro Performance Processes, Inc.] [Hydro Performance Processes, Inc.; Cones, Marvin [Mesa Associates, Inc.] [Mesa Associates, Inc.; Dham, Rajesh [U.S. Department of Energy] [U.S. Department of Energy; Spray, Michael [New West Technologies, LLC.] [New West Technologies, LLC.

    2012-01-01T23:59:59.000Z

    By using best practices to manage unit and plant efficiency, hydro owner/operators can achieve significant improvements in overall plant performance, resulting in increased generation and profitability and, frequently, reduced maintenance costs. The Hydropower Advancement Project (HAP) was initiated by the Wind and Hydropower Technologies Program within the U.S. Department of Energy (DOE) Office of Energy Efficiency and Renewable Energy to develop and implement a systematic process with standard methodology, based on the best practices of operations, maintenance and upgrades; to identify the improvement opportunities at existing hydropower facilities; and to predict and trend the overall condition and improvement opportunity within the U.S. hydropower fleet. The HAP facility assessment includes both quantitative condition ratings and data-based performance analyses. However, this paper, as an overview document for the HAP, addresses the general concepts, project scope and objectives, best practices for unit and plant efficiency, and process and methodology for best practices implementation for hydropower efficiency and utilization improvement.

  18. Advanced Nuclear Fuel Cycle Options

    SciTech Connect (OSTI)

    Roald Wigeland; Temitope Taiwo; Michael Todosow; William Halsey; Jess Gehin

    2010-06-01T23:59:59.000Z

    A systematic evaluation has been conducted of the potential for advanced nuclear fuel cycle strategies and options to address the issues ascribed to the use of nuclear power. Issues included nuclear waste management, proliferation risk, safety, security, economics and affordability, and sustainability. The two basic strategies, once-through and recycle, and the range of possibilities within each strategy, are considered for all aspects of the fuel cycle including options for nuclear material irradiation, separations if needed, and disposal. Options range from incremental changes to today’s implementation to revolutionary concepts that would require the development of advanced nuclear technologies.

  19. Advanced Manufacturing | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33Frequently20,000 Russian NuclearandJune 17, 2015EnergyTheAdvanced BiofuelsAdvanced DOEfunds

  20. Advanced Materials | More Science | ORNL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office511041cloth DocumentationProducts (VAP) VAP7-0973 1BP-14 Power andAdvancedCMWGLaboratoryAdvanced