Powered by Deep Web Technologies
Note: This page contains sample records for the topic "advanced joint inversion" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Joint inversion of AVA data for elastic parameters by bootstrapping  

Science Conference Proceedings (OSTI)

A joint inversion method is developed to estimate the elastic constants of two elastic, homogeneous, isotropic media separated by a flat horizontal boundary. The method jointly uses P and S-converted wave reflection amplitude-versus-angle (AVA) data ... Keywords: AVA, Bootstrapping, Elastic parameters, Joint inversion, Zoeppritz equations

Hülya Kurt

2007-03-01T23:59:59.000Z

2

2D Joint Inversion Of Dc And Scalar Audio-Magnetotelluric Data...  

Open Energy Info (EERE)

D Joint Inversion Of Dc And Scalar Audio-Magnetotelluric Data In The Evaluation Of Low Enthalpy Geothermal Fields Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home...

3

2D Joint Inversion Of Dc And Scalar Audio-Magnetotelluric Data In The  

Open Energy Info (EERE)

Joint Inversion Of Dc And Scalar Audio-Magnetotelluric Data In The Joint Inversion Of Dc And Scalar Audio-Magnetotelluric Data In The Evaluation Of Low Enthalpy Geothermal Fields Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Journal Article: 2D Joint Inversion Of DC And Scalar Audio-Magnetotelluric Data In The Evaluation Of Low Enthalpy Geothermal Fields Details Activities (0) Areas (0) Regions (0) Abstract: Audio-magnetotelluric (AMT) and resistivity (dc) surveys are often used in environmental, hydrological and geothermal evaluation. The separate interpretation of those geophysical data sets assuming two-dimensional models frequently produces ambiguous results. The joint inversion of AMT and dc data is advocated by several authors as an efficient method for reducing the ambiguity inherent to each of those

4

Estimation of in-situ petrophysical properties from wireline formation tester and induction logging measurements: A joint inversion approach  

E-Print Network (OSTI)

measurements: A joint inversion approach Faruk O. Alpak a, , Carlos Torres-Verdín a , Tarek M. Habashy b noise-free and noise-contaminated synthetic data. Joint inversion results provide a quantitative proof of measure- ments is jointly inverted to yield saturation-dependent functions. © 2008 Elsevier B.V. All

Torres-Verdín, Carlos

5

Advanced algorithms for coupled and inverse problems in electrical engineering  

Science Conference Proceedings (OSTI)

This paper presents some theoretical and numerical problems that arise in the analysis of coupled electromagnetic-thermal problems, and inverse problems in electromagnetic devices. The principal objective of the paper is to describe some computational ... Keywords: coupled fields, finite element method, inverse problems

Ion Cârstea

2008-06-01T23:59:59.000Z

6

Joint stochastic inversion of 3D pre-stack seismic data and well logs for high-resolution reservoir characterization and petrophysical modeling: application to deepwater hydrocarbon  

E-Print Network (OSTI)

Joint stochastic inversion of 3D pre-stack seismic data and well logs for high-resolution reservoir describes a novel algorithm for the joint stochastic inversion of well logs and multiple angle stacks, and M50, with M-40 being the reservoir with the highest hydrocarbon production. M-10 M-40 M-50 #12;Joint

Torres-Verdín, Carlos

7

Joint inversion of marine seismic AVA and CSEM data using statistical rock-physics models and Markov random fields: Stochastic inversion of AVA and CSEM data  

SciTech Connect

Joint inversion of seismic AVA and CSEM data requires rock-physics relationships to link seismic attributes to electrical properties. Ideally, we can connect them through reservoir parameters (e.g., porosity and water saturation) by developing physical-based models, such as Gassmann’s equations and Archie’s law, using nearby borehole logs. This could be difficult in the exploration stage because information available is typically insufficient for choosing suitable rock-physics models and for subsequently obtaining reliable estimates of the associated parameters. The use of improper rock-physics models and the inaccuracy of the estimates of model parameters may cause misleading inversion results. Conversely, it is easy to derive statistical relationships among seismic and electrical attributes and reservoir parameters from distant borehole logs. In this study, we develop a Bayesian model to jointly invert seismic AVA and CSEM data for reservoir parameter estimation using statistical rock-physics models; the spatial dependence of geophysical and reservoir parameters are carried out by lithotypes through Markov random fields. We apply the developed model to a synthetic case, which simulates a CO{sub 2} monitoring application. We derive statistical rock-physics relations from borehole logs at one location and estimate seismic P- and S-wave velocity ratio, acoustic impedance, density, electrical resistivity, lithotypes, porosity, and water saturation at three different locations by conditioning to seismic AVA and CSEM data. Comparison of the inversion results with their corresponding true values shows that the correlation-based statistical rock-physics models provide significant information for improving the joint inversion results.

Chen, J.; Hoversten, G.M.

2011-09-15T23:59:59.000Z

8

Advanced 3D inverse method for designing turbomachine blades  

DOE Green Energy (OSTI)

To meet the goal of 60% plant-cycle efficiency or better set in the ATS Program for baseload utility scale power generation, several critical technologies need to be developed. One such need is the improvement of component efficiencies. This work addresses the issue of improving the performance of turbo-machine components in gas turbines through the development of an advanced three-dimensional and viscous blade design system. This technology is needed to replace some elements in current design systems that are based on outdated technology.

Dang, T. [Syracuse Univ., NY (United States). Dept. of Mechanical/Aerospace/Manufacturing Engineering

1995-12-31T23:59:59.000Z

9

Joint inversion of P-and SV-wave traveltime error to esimate anisotropy: a CFP approach Robert J. Ferguson, Jackson School of Geosciences, Department of Geological Sciences, University of Texas  

E-Print Network (OSTI)

Joint inversion of P- and SV-wave traveltime error to esimate anisotropy: a CFP approach Robert J. For stability, joint inversion P- and SV-data is employed and, as pure SV-data are relatively rare, the use of mode-converted (PSV) data to represent SV in the joint inversion is suggested. Analytic and synthetic

Ferguson, Robert J.

10

Joint Inversion of Reservoir Production Measurements and 3D Pre-Stack Seismic Data: Proof Carlos Torres-Verdn, Zhan Wu, Omar J. Varela, Mrinal K. Sen, and Indrajit G. Roy.  

E-Print Network (OSTI)

Joint Inversion of Reservoir Production Measurements and 3D Pre-Stack Seismic Data: Proof for estimating three-dimensional (3D) reservoir parameters and initial fluid saturations jointly from pre good lateral and vertical control on lithology and fluid distributions. The proposed joint inversion

Torres-Verdín, Carlos

11

DOE Joint Genome Institute: Exploring Standards to Advance Microbial...  

NLE Websites -- All DOE Office Websites (Extended Search)

July 9, 2009 Exploring Standards to Advance Microbial Genomics WALNUT CREEK, CA-Microbes contribute to manifold human endeavors ranging from bioenergy to agriculture to medicine....

12

Virtual Welded - Joint Design Integrating Advanced Materials and Processing Technology  

Science Conference Proceedings (OSTI)

Virtual Welede-Joint Design, a systematic modeling approach, has been developed in this project to predict the relationship of welding process, microstructure, properties, residual stress, and the ultimate weld fatique strength. This systematic modeling approach was applied in the welding of high strength steel. A special welding wire was developed in this project to introduce compressive residual stress at weld toe. The results from both modeling and experiments demonstrated that more than 10x fatique life improvement can be acheived in high strength steel welds by the combination of compressive residual stress from the special welding wire and the desired weld bead shape from a unique welding process. The results indicate a technology breakthrough in the design of lightweight and high fatique performance welded structures using high strength steels.

Yang, Zhishang; Ludewig, Howard W.; Babu, S. Suresh

2005-06-30T23:59:59.000Z

13

Initial Report on the Development of a Monte Carlo-Markov Chain Joint Inversion Approach for Geothermal Exploration  

DOE Green Energy (OSTI)

Geothermal exploration and subsequent characterization of potential resources typically employ a variety of geophysical, geologic and geochemical techniques. However, since the data collected by each technique provide information directly on only one or a very limited set of the many physical parameters that characterize a geothermal system, no single method can be used to describe the system in its entirety. Presently, the usual approach to analyzing disparate data streams for geothermal applications is to invert (or forward model) each data set separately and then combine or compare the resulting models, for the most part in a more or less ad hoc manner. However, while each inversion may yield a model that fits the individual data set, the models are usually inconsistent with each other to some degree. This reflects uncertainties arising from the inevitable fact that geophysical and other exploration data in general are to some extent noisy, incomplete, and of limited sensitivity and resolution, and so yield non-unique results. The purpose of the project described here is to integrate the different model constraints provided by disparate geophysical, geological and geochemical data in a rigorous and consistent manner by formal joint inversion. The objective is to improve the fidelity of exploration results and reservoir characterization, thus addressing the goal of the DOE Geothermal Program to improve success in exploration for economically viable resources by better defining drilling targets, reducing risk, and improving exploration/drilling success rates.

Foxall, W; Ramirez, A; Carlson, S; Dyer, K; Sun, Y

2007-04-25T23:59:59.000Z

14

Oil shale, tar sand, coal research advanced exploratory process technology, jointly sponsored research  

SciTech Connect

Accomplishments for the past quarter are presented for the following five tasks: oil shale; tar sand; coal; advanced exploratory process technology; and jointly sponsored research. Oil shale research covers oil shale process studies. Tar sand research is on process development of Recycle Oil Pyrolysis and Extraction (ROPE) Process. Coal research covers: coal combustion; integrated coal processing concepts; and solid waste management. Advanced exploratory process technology includes: advanced process concepts;advanced mitigation concepts; and oil and gas technology. Jointly sponsored research includes: organic and inorganic hazardous waste stabilization; CROW field demonstration with Bell Lumber and Pole; development and validation of a standard test method for sequential batch extraction fluid; PGI demonstration project; operation and evaluation of the CO[sub 2] HUFF-N-PUFF Process; fly ash binder for unsurfaced road aggregates; solid state NMR analysis of Mesaverde Group, Greater Green River Basin, tight gas sands; flow-loop testing of double-wall pipe for thermal applications; characterization of petroleum residue; shallow oil production using horizontal wells with enhanced oil recovery techniques; surface process study for oil recovery using a thermal extraction process; NMR analysis of samples from the ocean drilling program; in situ treatment of manufactured gas plant contaminated soils demonstration program; and solid state NMR analysis of naturally and artificially matured kerogens.

Speight, J.G.

1992-01-01T23:59:59.000Z

15

Oil shale, tar sand, coal research, advanced exploratory process technology jointly sponsored research  

SciTech Connect

Accomplishments for the quarter are presented for the following areas of research: oil shale, tar sand, coal, advanced exploratory process technology, and jointly sponsored research. Oil shale research includes; oil shale process studies, environmental base studies for oil shale, and miscellaneous basic concept studies. Tar sand research covers process development. Coal research includes; underground coal gasification, coal combustion, integrated coal processing concepts, and solid waste management. Advanced exploratory process technology includes; advanced process concepts, advanced mitigation concepts, and oil and gas technology. Jointly sponsored research includes: organic and inorganic hazardous waste stabilization; development and validation of a standard test method for sequential batch extraction fluid; operation and evaluation of the CO[sub 2] HUFF-N-PUFF Process; fly ash binder for unsurfaced road aggregates; solid state NMR analysis of Mesa Verde Group, Greater Green River Basin, tight gas sands; flow-loop testing of double-wall pipe for thermal applications; characterization of petroleum residue; shallow oil production using horizontal wells with enhanced recovery techniques; and menu driven access to the WDEQ Hydrologic Data Management Systems.

1992-01-01T23:59:59.000Z

16

Virtual Welded-Joint Design Integrating Advanced Materials and Processing Technologies  

Science Conference Proceedings (OSTI)

The primary goal of this project is to increase the fatigue life of a welded-joint by 10 times and to reduce energy use by 25% through product performance and productivity improvements using an integrated modeling approach. The fatigue strength of a welded-joint is currently the bottleneck to design high performance and lightweight welded structures using advanced materials such as high strength steels. In order to achieve high fatigue strength in a welded-joint it is necessary to manage the weld bead shape for lower stress concentration, produce preferable residual stress distribution, and obtain the desired microstructure for improved material toughness and strength. This is a systems challenge that requires the optimization of the welding process, the welding consumable, the base material, as well as the structure design. The concept of virtual welded-joint design has been proposed and established in this project. The goal of virtual welded-joint design is to develop a thorough procedure to predict the relationship of welding process, microstructure, property, residual stress, and the ultimate weld fatigue strength by a systematic modeling approach. The systematic approach combines five sub-models: weld thermal-fluid model, weld microstructure model, weld material property model, weld residual stress model, and weld fatigue model. The systematic approach is thus based on interdisciplinary applied sciences including heat transfer, computational fluid dynamics, materials science, engineering mechanics, and material fracture mechanics. The sub-models are based on existing models with further development. The results from modeling have been validated with critical experiments. The systematic modeling approach has been used to design high fatigue resistant welds considering the combined effects of weld bead geometry, residual stress, microstructure, and material property. In particular, a special welding wire has been developed in this project to introduce compressive residual stress at weld toe for weld fatigue resistance.

Yang, Z.; Dong, P.; Liu, S.; Babu, S.; Olson, G.; DebRoy, T.

2005-04-15T23:59:59.000Z

17

Validation of the BERT Point Source Inversion Scheme Using the Joint Urban 2003 Tracer Experiment Dataset - Final Report  

SciTech Connect

A terrorist attack in a U.S. city utilizing biological weapons could have severe consequences. A biological agent could be aerosolized and emitted into the air in the middle of a city, invisibly traveling with the winds, and dosing an unknowing populace. The magnitude of the problem would only be revealed as sick people started arriving several days later at hospitals with symptoms, many already too ill to be saved. A national program has deployed a network of biological agent collectors in U.S. cities to provide early detection of a bio-weapon attack, thereby hastening medical intervention and potentially saving many thousands of lives. In fact, the most effective treatment takes place prior to infection or in its early stages and early warning might reduce the disease progression and, consequently, the possibility of an outbreak. If a biological attack were to occur in a city, one or more collectors may register hits with specific dosages and the city would be alerted that an attack had taken place. This piece of information alone, however, would not be enough to determine how serious the attack was, i.e., how much biological agent was released into the air and where the bio-plume traveled. The first responders and public health communities will want to know what regions were impacted, how many persons might get sick, which people most need medical supplies, and where to clean up. The law enforcement community will want to look for forensic evidence at the release location. The Bio-Agent Event Reconstruction Tool (BERT) has been developed in order to recreate what might have happened during an airborne biological agent attack based on biological agent collector measurements and wind collectors mounted around a city. The tool can be used to estimate possible release areas while eliminating other areas, and can estimate bounds on the amount of material released. The tool can then be used to project forward from the possible source areas to estimate potential hazard zones. Due to a unique source inversion technique - called the upwind collector footprint approach - the tool runs fast and the source regions can be determined in a few minutes. In this report, we provide an overview of the BERT framework, followed by a description of the source inversion technique. The Joint URBAN 2003 field experiment held in Oklahoma City that was used to validate BERT is then described. Subsequent sections describe the metrics used for evaluation, the comparison of the experimental data and BERT output, and under what conditions the BERT tool succeeds and performs poorly. Results are aggregated in different ways (e.g., daytime vs. nighttime releases, 1 vs. 2 vs. 3 hit collectors) to determine if BERT shows any systematic errors. Finally, recommendations are given for how to improve the code and procedures for optimizing performance in operational mode.

Brambilla, Sara [Los Alamos National Laboratory; Brown, Michael J. [Los Alamos National Laboratory

2012-06-18T23:59:59.000Z

18

Oil shale, tar sand, coal research, advanced exploratory process technology, jointly sponsored research  

SciTech Connect

Progress made in five research programs is described. The subtasks in oil shale study include oil shale process studies and unconventional applications and markets for western oil shale.The tar sand study is on recycle oil pyrolysis and extraction (ROPE) process. Four tasks are described in coal research: underground coal gasification; coal combustion; integrated coal processing concepts; and sold waste management. Advanced exploratory process technology includes: advanced process concepts; advanced mitigation concepts; and oil and gas technology. Jointly sponsored research covers: organic and inorganic hazardous waste stabilization; CROW field demonstration with Bell Lumber and Pole; development and validation of a standard test method for sequential batch extraction fluid; PGI demonstration project; operation and evaluation of the CO[sub 2] HUFF-N-PUFF process; fly ash binder for unsurfaced road aggregates; solid state NMR analysis of Mesaverde group, Greater Green River Basin, tight gas sands; flow-loop testing of double-wall pipe for thermal applications; shallow oil production using horizontal wells with enhanced oil recovery techniques; NMR analysis of sample from the ocean drilling program; and menu driven access to the WDEQ hydrologic data management system.

Not Available

1992-01-01T23:59:59.000Z

19

Joule-Thomson inversion curves of mixtures by molecular simulation in comparison to advanced equations of state: natural gas as an example  

E-Print Network (OSTI)

Molecular modelling and simulation as well as four equations of state (EOS) are applied to natural gas mixtures regarding Joule-Thomson (JT) inversion. JT inversion curves are determined by molecular simulation for six different natural gas mixtures consisting of methane, nitrogen, carbon dioxide and ethane. These components are also regarded as pure fluids, leading to a total of ten studied systems. The results are compared to four advanced mixture EOS: DDMIX, SUPERTRAPP, BACKONE and the recent GERG-2004 Wide-Range Reference EOS. It is found that molecular simulation is competitive with state-of-the-art EOS in predicting JT inversion curves. The molecular based approaches (simulation and BACKONE) are superior to DDMIX and SUERTRAPP.

Vrabec, J; Hasse, H

2009-01-01T23:59:59.000Z

20

Sensitivity of Solder Joint Fatigue to Sources of Variation in Advanced Vehicular Power Electronics Cooling  

SciTech Connect

This paper demonstrates a methodology for taking variation into account in thermal and fatigue analyses of the die attach for an inverter of an electric traction drive vehicle. This method can be used to understand how variation and mission profile affect parameters of interest in a design. Three parameters are varied to represent manufacturing, material, and loading variation: solder joint voiding, aluminum nitride substrate thermal conductivity, and heat generation at the integrated gate bipolar transistor. The influence of these parameters on temperature and solder fatigue life is presented. The heat generation loading variation shows the largest influence on the results for the assumptions used in this problem setup.

Vlahinos, A.; O' Keefe, M.

2010-06-01T23:59:59.000Z

Note: This page contains sample records for the topic "advanced joint inversion" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Distance learning in advanced military education: Analysis of joint operations course in the Taiwan military  

Science Conference Proceedings (OSTI)

High-ranking officers require advanced military education in war tactics for future combat. However, line officers rarely have time to take such courses on campus. The conventional solution to this problem used to take the inefficient correspondence ... Keywords: Applications in subject areas, Architectures for educational technology system, Distributed learning environments

Ming-Chih Tung; Jiung-yao Huang; Huan-Chao Keh; Shu-shen Wai

2009-11-01T23:59:59.000Z

22

Joint System Prognostics For Increased Efficiency And Risk Mitigation In Advanced Nuclear Reactor Instrumentation and Control  

SciTech Connect

The science of prognostics is analogous to a doctor who, based on a set of symptoms and patient tests, assesses a probable cause, the risk to the patient, and a course of action for recovery. While traditional prognostics research has focused on the aspect of hydraulic and mechanical systems and associated failures, this project will take a joint view in focusing not only on the digital I&C aspect of reliability and risk, but also on the risks associated with the human element. Model development will not only include an approximation of the control system physical degradation but also on human performance degradation. Thus the goal of the prognostic system is to evaluate control room operation; to identify and potentially take action when performance degradation reduces plant efficiency, reliability or safety.

Donald D. Dudenhoeffer; Tuan Q. Tran; Ronald L. Boring; Bruce P. Hallbert

2006-08-01T23:59:59.000Z

23

Proceedings of the joint contractors meeting: FE/EE Advanced Turbine Systems conference FE fuel cells and coal-fired heat engines conference  

SciTech Connect

The joint contractors meeting: FE/EE Advanced Turbine Systems conference FEE fuel cells and coal-fired heat engines conference; was sponsored by the US Department of Energy Office of Fossil Energy and held at the Morgantown Energy Technology Center, P.O. Box 880, Morgantown, West Virginia 26507-0880, August 3--5, 1993. Individual papers have been entered separately.

Geiling, D.W. [ed.

1993-08-01T23:59:59.000Z

24

Advanced thermionic energy conversion. Joint highlights and status report, July-September 1979  

DOE Green Energy (OSTI)

The DOE portion of the effort is directed primarily toward terrestrial applications of thermionic energy converters suitable for use with fossil fueled heat sources in power plants. The NASA program is directed at establishing the technical feasibility of an advanced, light-weight, long-life thermionic conversion system compatible with a remote nuclear or solar heat source. The principal application foreseen at this time is in nuclear electric propulsion (NEP) missions in the mid-1990's. Significant accomplishments for the DOE program include: (1) successfully operating a thermionic converter using a cold insulator seal (Plexiglass and Viton); (2) completed fabrication and testing of SPC-9, a reference planar converter with smooth molybdenum electrodes; (3) created a shooting type analytical ignited mode converter computer model; (4) projected the operating conditions needed to achieve advanced converter performance with a thick cesium oxide collector; and (5) invented a cellular ceramic heat exchanger for obtaining high radiant heat flux from a hot gas. Accomplishments for the NASA program include: (1) achieved over 3100 hours of operation with the cylindrical converter JPL-5 (STR/STR); (2) provided guidelines for definition of optimum lead characteristics in the JPL NEP computer program; and (3) performed a preliminary NEP optimization study which suggests a 400 kWe system with a specific mass of 26 kg/kWe is possible with present converter performance (V/sub B/ = 2.0). Details are presented. (WHK)

Not Available

1979-01-01T23:59:59.000Z

25

DOE Joint Genome Institute: Advancing Next Gen Biofuels by Turning Up the  

NLE Websites -- All DOE Office Websites (Extended Search)

October 2, 2011 October 2, 2011 Advancing Next Gen Biofuels by Turning Up the Heat on Biomass Pretreatment Processes WALNUT CREEK, Calif.-The nation's Renewable Fuels Standard calls for annual production of 36 billion gallons of biofuel by 2022. One of the biggest hurdles to achieving this goal lies in optimizing the multistep process involved in breaking down plant biomass and then converting it into fermentable sugars that can be refined into fuel for our transportation needs. To overcome this challenge, the U.S. Department of Energy supports several projects focused on identifying enzymes from fungi and microbes such as cellulases-that breakdown plant cell walls-and heat-tolerant industrial-strength host cell systems to drive these reactions. Photo: The thermophilic fungus M. thermophila

26

Advanced thermionic energy conversion. Joint highlights and status report, April-June 1979  

DOE Green Energy (OSTI)

The DOE portion of the effort at Rasor Associates is directed primarily toward terrestrial applications of thermionic energy conversion. It focuses on the development of converters suitable for use with fossil fueled heat sources in power plants. The NASA program is directed at establishing the technical feasibility of an advanced light-weight long-life thermionic conversion system compatible with a remote nuclear or solar heat source. The principal application forseen at this time is in nuclear electric propulsion (NEP) missions in the mid-1990's. Significant accomplishments for the three month period include: (1) devised a blade-type distributed lead design with many advantages compared to the stud-type distributed lead; (2) completed design of Marchuk tube test apparatus; (3) concluded, based on current understanding, that residual hydrogen should not contribute to a negative space charge barrier at the collector; (4) modified THX design program to include series-coupled designs as well as inductively-coupled designs; (5) initiated work on the heat transfer technology, THX test module, output power transfer system, heat transfer system, and conceptual plant design tasks; and (6) reached 2200 hours of operation in JPL-5 cylindrical converter envelope test. (WHK)

Not Available

1979-01-01T23:59:59.000Z

27

Oil shale, tar sand, coal research, advanced exploratory process technology, jointly sponsored research. Quarterly technical progress report, January--March 1993  

SciTech Connect

Accomplishments for the past quarter are briefly described for the following areas of research: oil shale; tar sand; coal; advanced exploratory process technology; and jointly sponsored research. Oil shale and tar sand researches cover processing studies. Coal research includes: coal combustion; integrated coal processing concepts; and solid waste management. Advanced exploratory process technology covers: advanced process concepts; advanced mitigation concepts; and oil and gas technology. Jointly sponsored research includes: organic and inorganic hazardous waste stabilization; CROW{sup TM} field demonstration with Bell Lumber and Pole; development and validation of a standard test method for sequential batch extraction fluid; operation and evaluation of the CO{sub 2} HUFF-N-PUFF Process; fly ash binder for unsurfaced road aggregates; solid-state NMR analysis of Mesaverde Group, Greater Green River Basin tight gas sands; characterization of petroleum residue; shallow oil production using horizontal wells with enhanced oil recovery techniques; surface process study for oil recovery using a thermal extraction process; oil field waste cleanup using tank bottom recovery process; remote chemical sensor development; in situ treatment of manufactured gas plant contaminated soils demonstration program; solid-state NMR analysis of naturally and artificially matured kerogens; and development of an effective method for the clean-up of natural gas.

1993-09-01T23:59:59.000Z

28

Oil shale, tar sand, coal research advanced exploratory process technology, jointly sponsored research. Quarterly technical progress report, October--December 1992  

SciTech Connect

Accomplishments for the past quarter are presented for the following five tasks: oil shale; tar sand; coal; advanced exploratory process technology; and jointly sponsored research. Oil shale research covers oil shale process studies. Tar sand research is on process development of Recycle Oil Pyrolysis and Extraction (ROPE) Process. Coal research covers: coal combustion; integrated coal processing concepts; and solid waste management. Advanced exploratory process technology includes: advanced process concepts;advanced mitigation concepts; and oil and gas technology. Jointly sponsored research includes: organic and inorganic hazardous waste stabilization; CROW field demonstration with Bell Lumber and Pole; development and validation of a standard test method for sequential batch extraction fluid; PGI demonstration project; operation and evaluation of the CO{sub 2} HUFF-N-PUFF Process; fly ash binder for unsurfaced road aggregates; solid state NMR analysis of Mesaverde Group, Greater Green River Basin, tight gas sands; flow-loop testing of double-wall pipe for thermal applications; characterization of petroleum residue; shallow oil production using horizontal wells with enhanced oil recovery techniques; surface process study for oil recovery using a thermal extraction process; NMR analysis of samples from the ocean drilling program; in situ treatment of manufactured gas plant contaminated soils demonstration program; and solid state NMR analysis of naturally and artificially matured kerogens.

Speight, J.G.

1992-12-31T23:59:59.000Z

29

Oil shale, tar sand, coal research, advanced exploratory process technology jointly sponsored research. Quarterly technical progress report, April--June 1992  

SciTech Connect

Accomplishments for the quarter are presented for the following areas of research: oil shale, tar sand, coal, advanced exploratory process technology, and jointly sponsored research. Oil shale research includes; oil shale process studies, environmental base studies for oil shale, and miscellaneous basic concept studies. Tar sand research covers process development. Coal research includes; underground coal gasification, coal combustion, integrated coal processing concepts, and solid waste management. Advanced exploratory process technology includes; advanced process concepts, advanced mitigation concepts, and oil and gas technology. Jointly sponsored research includes: organic and inorganic hazardous waste stabilization; development and validation of a standard test method for sequential batch extraction fluid; operation and evaluation of the CO{sub 2} HUFF-N-PUFF Process; fly ash binder for unsurfaced road aggregates; solid state NMR analysis of Mesa Verde Group, Greater Green River Basin, tight gas sands; flow-loop testing of double-wall pipe for thermal applications; characterization of petroleum residue; shallow oil production using horizontal wells with enhanced recovery techniques; and menu driven access to the WDEQ Hydrologic Data Management Systems.

1992-12-01T23:59:59.000Z

30

Joint SSRTNet/ALS-MES Workshop report  

E-Print Network (OSTI)

conclusion of his SRRTNet/ALS-MES Workshop presentation inJoint SSRTNet/ALS-MES Workshop This joint workshop broughtthe Advanced Light Source (ALS) Users’ Association Annual

Shuh, David; Van Hove, Michel

2001-01-01T23:59:59.000Z

31

Oil shale, tar sand, coal research, advanced exploratory process technology, jointly sponsored research. Quarterly technical progress report, April--June 1993  

SciTech Connect

Progress made in five areas of research is described briefly. The subtask in oil shale research is on oil shale process studies. For tar sand the subtask reported is on process development. Coal research includes the following subtasks: Coal combustion; integrated coal processing concepts; and solid waste management. Advanced exploratory process technology includes the following: Advanced process concepts; advanced mitigation concepts; oil and gas technology. Jointly sponsored research includes: Organic and inorganic hazardous waste stabilization; CROW{sup TM} field demonstration with Bell Lumber and Pole; development and validation of a standard test method for sequential batch extraction fluid; operation and evaluation of the CO{sup 2} HUFF-N-PUFF Process; fly ash binder for unsurfaced road aggregates; solid-state NMR analysis of Mesaverde Group, Greater Green River Basin, tight gas sands; characterization of petroleum residua; shallow oil production using horizontal wells with enhanced oil recovery techniques; surface process study for oil recovery using a thermal extraction process;NMR analysis of samples from the ocean drilling program; oil field waste cleanup using tank bottom recovery process; remote chemical sensor development; in situ treatment of manufactured gas plant contaminated soils demonstration program; solid-state NMR analysis of Mowry formation shale from different sedimentary basins; solid-state NMR analysis of naturally and artificially matured kerogens; and development of effective method for the clean-up of natural gas.

1993-09-01T23:59:59.000Z

32

Oil shale, tar sand, coal research, advanced exploratory process technology, jointly sponsored research. Quarterly technical progress report, July--September 1992  

SciTech Connect

Progress made in five research programs is described. The subtasks in oil shale study include oil shale process studies and unconventional applications and markets for western oil shale.The tar sand study is on recycle oil pyrolysis and extraction (ROPE) process. Four tasks are described in coal research: underground coal gasification; coal combustion; integrated coal processing concepts; and sold waste management. Advanced exploratory process technology includes: advanced process concepts; advanced mitigation concepts; and oil and gas technology. Jointly sponsored research covers: organic and inorganic hazardous waste stabilization; CROW field demonstration with Bell Lumber and Pole; development and validation of a standard test method for sequential batch extraction fluid; PGI demonstration project; operation and evaluation of the CO{sub 2} HUFF-N-PUFF process; fly ash binder for unsurfaced road aggregates; solid state NMR analysis of Mesaverde group, Greater Green River Basin, tight gas sands; flow-loop testing of double-wall pipe for thermal applications; shallow oil production using horizontal wells with enhanced oil recovery techniques; NMR analysis of sample from the ocean drilling program; and menu driven access to the WDEQ hydrologic data management system.

Not Available

1992-12-31T23:59:59.000Z

33

ADVANCED BIOMASS REBURNING FOR HIGH EFFICIENCY NOx CONTROL AND BIOMASS REBURNING - MODELING/ENGINEERING STUDIES JOINT FINAL REPORT  

DOE Green Energy (OSTI)

This report presents results of studies under a Phase II SBIR program funded by the U. S. Department of Agriculture, and a closely coordinated project sponsored by the DOE National Energy Technology Laboratory (NETL, formerly FETC). The overall Phase II objective of the SBIR project is to experimentally optimize the biomass reburning technologies and conduct engineering design studies needed for process demonstration at full scale. The DOE project addresses supporting issues for the process design including modeling activities, economic studies of biomass handling, and experimental evaluation of slagging and fouling. The performance of biomass has been examined in a 300 kW (1 x 10{sup 6} Btu/hr) Boiler Simulator Facility under different experimental conditions. Fuels under investigation include furniture waste, willow wood and walnut shells. Tests showed that furniture pellets and walnut shells provided similar NO{sub x} control as that of natural gas in basic reburning at low heat inputs. Maximum NO{sub x} reduction achieved with walnut shell and furniture pellets was 65% and 58% respectively. Willow wood provided a maximum NO{sub x} reduction of 50% and was no better than natural gas at any condition tested. The efficiency of biomass increases when N-agent is injected into reburning and/or burnout zones, or along with OFA (Advanced Reburning). Co-injection of Na{sub 2}CO{sub 3} with N-agent further increases efficiency of NO{sub x} reduction. Maximum NO{sub x} reduction achieved with furniture pellets and willow wood in Advanced Reburning was 83% and 78% respectively. All combustion experiments of the Phase II project have been completed. All objectives of the experimental tasks were successfully met. The kinetic model of biomass reburning has been developed. Model agrees with experimental data for a wide range of initial conditions and thus correctly represents main features of the reburning process. Modeling suggests that the most important factors that provide high efficiency of biomass in reburning are low fuel-N content and high content of alkali metals in ash. These results indicate that the efficiency of biomass as a reburning fuel may be predicted based on its ultimate, proximate, and ash analyses. The results of experimental and kinetic modeling studies were utilized in applying a validated methodology for reburning system design to biomass reburning in a typical coal-fired boiler. Based on the trends in biomass reburning performance and the characteristics of the boiler under study, a preliminary process design for biomass reburning was developed. Physical flow models were applied to specific injection parameters and operating scenarios, to assess the mixing performance of reburning fuel and overfire air jets which is of paramount importance in achieving target NO{sub x} control performance. The two preliminary cases studied showed potential as candidate reburning designs, and demonstrated that similar mixing performance could be achieved in operation with different quantities of reburning fuel. Based upon this preliminary evaluation, EER has determined that reburning and advanced reburning technologies can be successfully applied using biomass. Pilot-scale studies on biomass reburning conducted by EER have indicated that biomass is an excellent reburning fuel. This generic design study provides a template approach for future demonstrations in specific installations.

Vladimir M. Zamansky; Mark S. Sheldon; Vitali V. Lissianski; Peter M. Maly; David K. Moyeda; Antonio Marquez; W. Randall Seeker

2000-10-01T23:59:59.000Z

34

Research investigations in oil shale, tar sand, coal research, advanced exploratory process technology, and advanced fuels research: Volume 2 -- Jointly sponsored research program. Final report, October 1986--September 1993  

DOE Green Energy (OSTI)

Numerous studies have been conducted in five principal areas: oil shale, tar sand, underground coal gasification, advanced process technology, and advanced fuels research. In subsequent years, underground coal gasification was broadened to be coal research, under which several research activities were conducted that related to coal processing. The most significant change occurred in 1989 when the agreement was redefined as a Base Program and a Jointly Sponsored Research Program (JSRP). Investigations were conducted under the Base Program to determine the physical and chemical properties of materials suitable for conversion to liquid and gaseous fuels, to test and evaluate processes and innovative concepts for such conversions, to monitor and determine environmental impacts related to development of commercial-sized operations, and to evaluate methods for mitigation of potential environmental impacts. This report is divided into two volumes: Volume 1 consists of 28 summaries that describe the principal research efforts conducted under the Base Program in five topic areas. Volume 2 describes tasks performed within the JSRP. Research conducted under this agreement has resulted in technology transfer of a variety of energy-related research information. A listing of related publications and presentations is given at the end of each research topic summary. More specific and detailed information is provided in the topical reports referenced in the related publications listings.

Smith, V.E.

1994-09-01T23:59:59.000Z

35

Joint popping  

NLE Websites -- All DOE Office Websites (Extended Search)

Joint popping Name: danb Status: NA Age: NA Location: NA Country: NA Date: Around 1993 Question: Why do your joints pop? For example, when I am walking my ankle always makes a...

36

A budget of inversions  

Science Conference Proceedings (OSTI)

Two problems of inversion are considered. First are the inverses in a stand ard circle of curves based on two fixed points, i.e., Circles of Apollonius, Conic Sections and Ovals of Cassini; then the inverses of lines not passing through the center of ... Keywords: Circles of Apollonius, City block metric, Conies, Inversion, Ovals of Cassini

J. A. Nickel

1995-03-01T23:59:59.000Z

37

Ceramic joints  

DOE Patents (OSTI)

Butt joints between materials having different coefficients of thermal expansion are prepared having a reduced probability of failure of stress facture. This is accomplished by narrowing/tapering the material having the lower coefficient of thermal expansion in a direction away from the joint interface and not joining the narrow-tapered surface to the material having the higher coefficient of thermal expansion.

Miller, Bradley J. (Worcester, MA); Patten, Jr., Donald O. (Sterling, MA)

1991-01-01T23:59:59.000Z

38

Geophysical Prospecting, 2004, 52, 547557 Estimating the elastic parameters of anisotropic media using a joint  

E-Print Network (OSTI)

using a joint inversion of P-wave and SV-wave traveltime error R.J. Ferguson1 and M.K. Sen1,2 1, joint inversion of P and SV data is employed and, as pure SV data are relatively rare, the use of mode-converted (PSV) data to represent SV in the joint inversion is proposed. Analytic and synthetic examples are used

Ferguson, Robert J.

39

The Joint BioEnergy Institute (JBEI): Developing New Biofuels by Overcoming Biomass Recalcitrance  

E-Print Network (OSTI)

010-9086-2 The Joint BioEnergy Institute (JBEI): DevelopingThe mission of the Joint BioEnergy Institute is to advanceJ. D. Keasling Joint BioEnergy Institute, 5885 Hollis St. ,

Scheller, Henrik Vibe; Singh, Seema; Blanch, Harvey; Keasling, Jay D.

2010-01-01T23:59:59.000Z

40

Inverse Problems in Heat Transfer  

E-Print Network (OSTI)

This chapter presents a stochastic modeling and statistical inference approach to the solution of inverse problems in thermal transport systems. Of particular interest is the inverse heat conduction problem (IHCP) of estimating an unknown boundary heat flux in a conducting solid given temperature data within the domain. Even though deterministic sequential and whole time domain estimation methods have been applied with success over the years for the solution of such problems, we herein introduce stochastic approaches to representing and solving the IHCP. As most engineering systems and processes operate in an uncertain environment, it becomes increasingly important to address their analysis and inverse design in a stochastic manner using statistical data-driven prior and concurrent information on the system response. Recent advances in spectral stochastic modeling, computational Bayesian and spatial statistics enable complete and e#cient solution procedures to such problems. Two distinct approaches to the IHCP are presented in this chapter one based on spectral stochastic modeling and the other on Bayesian inference. Although these techniques are discussed in the context of the IHCP, the methodologies presented are general and applicable to design and estimation problems in other more complex problems in thermal transport systems including problems in the presence of convection, radiation and conduction. 1

Nicholas Zabaras

2004-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "advanced joint inversion" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Jointly Sponsored Research Program  

DOE Green Energy (OSTI)

U.S. Department of Energy (DOE) Cooperative Agreement DE-FC26-98FT40321 funded through the Office of Fossil Energy and administered at the National Energy Technology Laboratory (NETL) supported the performance of a Jointly Sponsored Research Program (JSRP) at the Energy & Environmental Research Center (EERC) with a minimum 50% nonfederal cost share to assist industry in commercializing and effectively applying highly efficient, nonpolluting energy systems that meet the nation's requirements for clean fuels, chemicals, and electricity in the 21st century. The EERC in partnership with its nonfederal partners jointly performed 131 JSRP projects for which the total DOE cost share was $22,716,634 (38%) and the nonfederal share was $36,776,573 (62%). Summaries of these projects are presented in this report for six program areas: (1) resource characterization and waste management, (2) air quality assessment and control, (3) advanced power systems, (4) advanced fuel forms, (5) value-added coproducts, and (6) advanced materials. The work performed under this agreement addressed DOE goals for reductions in CO{sub 2} emissions through efficiency, capture, and sequestration; near-zero emissions from highly efficient coal-fired power plants; environmental control capabilities for SO{sub 2}, NO{sub x}, fine respirable particulate (PM{sub 2.5}), and mercury; alternative transportation fuels including liquid synfuels and hydrogen; and synergistic integration of fossil and renewable resources.

Everett A. Sondreal; John G. Hendrikson; Thomas A. Erickson

2009-03-31T23:59:59.000Z

42

The inverse crime  

E-Print Network (OSTI)

The inverse crime occurs when the same (or very nearly the same) theoretical ingredients are employed to synthesize as well as to invert data in an inverse problem. This act has been qualified as trivial and therefore to be avoided by Colton and Kress.

Armand Wirgin

2004-01-28T23:59:59.000Z

43

Statistical Inference in Inverse Problems  

E-Print Network (OSTI)

Inverse problems have gained popularity in statistical research recently. This dissertation consists of two statistical inverse problems: a Bayesian approach to detection of small low emission sources on a large random background, and parameter estimation methods for partial differential equation (PDE) models. Source detection problem arises, for instance, in some homeland security applications. We address the problem of detecting presence and location of a small low emission source inside an object, when the background noise dominates. The goal is to reach the signal-to-noise ratio levels on the order of 10^-3. We develop a Bayesian approach to this problem in two-dimension. The method allows inference not only about the existence of the source, but also about its location. We derive Bayes factors for model selection and estimation of location based on Markov chain Monte Carlo simulation. A simulation study shows that with sufficiently high total emission level, our method can effectively locate the source. Differential equation (DE) models are widely used to model dynamic processes in many fields. The forward problem of solving equations for given parameters that define the DEs has been extensively studied in the past. However, the inverse problem of estimating parameters based on observed state variables is relatively sparse in the statistical literature, and this is especially the case for PDE models. We propose two joint modeling schemes to solve for constant parameters in PDEs: a parameter cascading method and a Bayesian treatment. In both methods, the unknown functions are expressed via basis function expansion. For the parameter cascading method, we develop the algorithm to estimate the parameters and derive a sandwich estimator of the covariance matrix. For the Bayesian method, we develop the joint model for data and the PDE, and describe how the Markov chain Monte Carlo technique is employed to make posterior inference. A straightforward two-stage method is to first fit the data and then to estimate parameters by the least square principle. The three approaches are illustrated using simulated examples and compared via simulation studies. Simulation results show that the proposed methods outperform the two-stage method.

Xun, Xiaolei

2012-05-01T23:59:59.000Z

44

Piecewise Potential Vorticity Inversion  

Science Conference Proceedings (OSTI)

The treatment of the potential vorticity (PV) distribution as a composite of individual perturbations is central to the diagnostic and conceptual utility of PV. Nonlinearity in the inversion operator for Ertel's potential vorticity renders ...

Christopher A. Davis

1992-08-01T23:59:59.000Z

45

The Magnetotelluric Inverse Problem  

E-Print Network (OSTI)

1572–1592. Banks, R. , 1969: Geomagnetic variations and theThe inverse problem in geomagnetic induction. Z. Geophys. ,sound inferences from geomagnetic sounding, doi:10.1016/j.

Medin, Ashley E

2008-01-01T23:59:59.000Z

46

The magnetotelluric inverse problem  

E-Print Network (OSTI)

1572–1592. Banks, R. , 1969: Geomagnetic variations and theThe inverse problem in geomagnetic induction. Z. Geophys. ,sound inferences from geomagnetic sounding, doi:10.1016/j.

Medin, Ashley E.

2008-01-01T23:59:59.000Z

47

Inverse Lighting for Photography  

E-Print Network (OSTI)

We introduce a technique for improving photographs using inverse lighting, a new process based on algorithms developed in computer graphics for computing the reflection of light in 3D space. From a photograph and a 3D surface model for the object pictured, inverse lighting estimates the directional distribution of the incident light. We then use this information to process the photograph digitally to alter the lighting on the object. Inverse lighting is a specific example of the general idea of inverse rendering. This refers to the practice of using the methods of computer graphics, which normally are used to render images from scene information, to infer scene information from images. Our system uses physically based rendering technology to construct a linear least squares system that we solve to find the lighting. As an application, the results are then used to simulate a change in the incident light in the photograph. An implementation is described that uses 3D models from a laser...

Stephen R. Marschner; Donald P. Greenberg

1997-01-01T23:59:59.000Z

48

Generalized Inverse Seesaws  

E-Print Network (OSTI)

The seesaw mechanism can be generalized to a Type-III variant and a quintuplet variant. We present two models that provide analogous generalizations of the inverse seesaw mechanism. The first model employs a fermion triplet F ~ (1,3,0) and requires no additional multiplets or parameters relative to the standard inverse seesaw. We argue that, from a bottom-up perspective, there appears to be no particular reason to preference the usual scenario over this variant. The second model employs a fermion quintuplet F ~ (1,5,0) and requires an additional scalar S ~ (1,4,1). We also show that minimal inverse seesaws with even larger fermionic representations are not expected to realize naturally small neutrino masses.

Law, Sandy S C

2013-01-01T23:59:59.000Z

49

Generalized Inverse Seesaws  

E-Print Network (OSTI)

The seesaw mechanism can be generalized to a Type-III variant and a quintuplet variant. We present two models that provide analogous generalizations of the inverse seesaw mechanism. The first model employs a fermion triplet F ~ (1,3,0) and requires no additional multiplets or parameters relative to the standard inverse seesaw. We argue that, from a bottom-up perspective, there appears to be no particular reason to preference the usual scenario over this variant. The second model employs a fermion quintuplet F ~ (1,5,0) and requires an additional scalar S ~ (1,4,1). We also show that minimal inverse seesaws with even larger fermionic representations are not expected to realize naturally small neutrino masses.

Sandy S. C. Law; Kristian L. McDonald

2013-03-20T23:59:59.000Z

50

WIPP - Joint Information Center  

NLE Websites -- All DOE Office Websites (Extended Search)

The Joint Information Center is located at 4021 National Parks Highway in Carlsbad, N.M. Joint Information Center In the unlikely event of an emergency, the WIPP Joint Information...

51

Why inverse document frequency?  

Science Conference Proceedings (OSTI)

Inverse Document Frequency (IDF) is a popular measure of a word's importance. The IDF invariably appears in a host of heuristic measures used in information retrieval. However, so far the IDF has itself been a heuristic. In this paper, we show IDF to ...

Kishore Papineni

2001-06-01T23:59:59.000Z

52

Advanced Research  

NLE Websites -- All DOE Office Websites (Extended Search)

Super HigH-TemperaTure alloyS and Super HigH-TemperaTure alloyS and CompoSiTeS From nb-W-Cr SySTemS Description The U.S. Department of Energy's Office of Fossil Energy (DOE-FE) has awarded a three-year grant to the University of Texas at El Paso (UTEP) and Argonne National Laboratory (ANL) to jointly explore the high-temperature properties of alloys composed of niobium (Nb), tungsten (W), and chromium (Cr). The grant is administered by the Advanced Research (AR) program of the National

53

Alternative Fuels Data Center: Joint Use of Government Fueling  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Joint Use of Joint Use of Government Fueling Infrastructure to someone by E-mail Share Alternative Fuels Data Center: Joint Use of Government Fueling Infrastructure on Facebook Tweet about Alternative Fuels Data Center: Joint Use of Government Fueling Infrastructure on Twitter Bookmark Alternative Fuels Data Center: Joint Use of Government Fueling Infrastructure on Google Bookmark Alternative Fuels Data Center: Joint Use of Government Fueling Infrastructure on Delicious Rank Alternative Fuels Data Center: Joint Use of Government Fueling Infrastructure on Digg Find More places to share Alternative Fuels Data Center: Joint Use of Government Fueling Infrastructure on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type

54

Institute for Advanced Studies  

NLE Websites -- All DOE Office Websites (Extended Search)

Institute for Advanced Studies Institute for Advanced Studies Institute for Advanced Studies NMC leverages the strengths of three research universities to build joint programs, develop strategic partnerships, provide common organization and facilities. Contact Leader TBD LANL Program Administrator Pam Hundley (505) 663-5453 Email Building regional partnerships in education, leveraging strengths of three research universities The Institute for Advanced Studies (IAS) works with the three New Mexico research universities (University of New Mexico, New Mexico Tech, and New Mexico State University) to develop research and educational collaborations and partnerships. To facilitate interactions between the universities and LANL, the three New Mexico schools established the New Mexico Consortium (NMC), a nonprofit

55

Joint Announcement | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Joint Announcement Joint Announcement Joint Announcement More Documents & Publications Comparing the Impacts of the 2005 and 2008 Hurricanes on U.S. Energy Infrastructure -...

56

PNNL: About PNNL - Joint Appointments  

NLE Websites -- All DOE Office Websites (Extended Search)

Yong Wang WSUPNNL Joint Appointee Yong Wang Named Fellow of American Chemical Society. Read the Full Article Joint Appointments The Joint Appointment Program is one means of...

57

Large displacement spherical joint  

DOE Patents (OSTI)

A new class of spherical joints has a very large accessible full cone angle, a property which is beneficial for a wide range of applications. Despite the large cone angles, these joints move freely without singularities.

Bieg, Lothar F. (Albuquerque, NM); Benavides, Gilbert L. (Albuquerque, NM)

2002-01-01T23:59:59.000Z

58

NREL: Computational Science - Inverse Design  

NLE Websites -- All DOE Office Websites (Extended Search)

Inverse Design Inverse Design The NREL Computational Science Center collaborates with the High Throughput and Inverse Band Structure (HT/IBS) Group within the Center for Inverse Design (CID) to research, design, and create materials with given target properties. The Center for Inverse Design is an Energy Frontier Research Center of the U.S. Department of Energy Office of Science. To address a crucial scientific grand challenge, the Center is pursuing a new approach to material science. Rather than using the conventional direct approach ("Given the structure, find the electronic properties"), we are using a "materials by inverse design" approach ("Given the desired property, find the structure"). Illustration of a blue arrow pointing to a graphic with three curved lines that represent an electronic structure and blue arrow pointing to a red and blue balls that represent an atomic configuration.

59

Inverse Fusion PCR Cloning  

E-Print Network (OSTI)

Inverse fusion PCR cloning (IFPC) is an easy, PCR based three-step cloning method that allows the seamless and directional insertion of PCR products into virtually all plasmids, this with a free choice of the insertion site. The PCR-derived inserts contain a vector-complementary 59-end that allows a fusion with the vector by an overlap extension PCR, and the resulting amplified insert-vector fusions are then circularized by ligation prior transformation. A minimal amount of starting material is needed and experimental steps are reduced. Untreated circular plasmid, or alternatively bacteria containing the plasmid, can be used as templates for the insertion, and clean-up of the insert fragment is not urgently required. The whole cloning procedure can be performed within a minimal hands-on time and results in the generation of hundreds to ten-thousands of positive colonies, with a minimal background.

Markus Spiliotis

2012-01-01T23:59:59.000Z

60

Nuclear Maintenance Applications Center: Assembling Gasketed, Flanged Bolted Joints  

Science Conference Proceedings (OSTI)

Over the years, EPRI has published various reports that provide guidance on bolting usage. As a result of advancements over time in understanding the problems with bolted assembly makeup as well as human performance, these reports presented sometimes-contradictory recommendations. Additional research has addressed gasketed joints and gasketed joint makeup. This report reconciles and consolidates the earlier documents.

2007-12-21T23:59:59.000Z

Note: This page contains sample records for the topic "advanced joint inversion" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

JOINT DEGREE PROGRAM LEADING TO THE  

E-Print Network (OSTI)

programs prior to beginning their graduate work. If a student decides to enter the combined program after with advanced work may be admitted to the Graduate School through the Graduate Program in Urban PlanningJOINT DEGREE PROGRAM LEADING TO THE MASTER OF URBAN PLANNING AND MASTER OF ARTS IN GEOGRAPHY DEGREE

Peterson, Blake R.

62

Inverse problem for Bremsstrahlung radiation  

SciTech Connect

For certain predominantly one-dimensional distribution functions, an analytic inversion has been found which yields the velocity distribution of superthermal electrons given their Bremsstrahlung radiation. 5 refs.

Voss, K.E.; Fisch, N.J.

1991-10-01T23:59:59.000Z

63

Joint Genome Institute (JGI) Projects at NERSC  

NLE Websites -- All DOE Office Websites (Extended Search)

Joint Genome Institute Joint Genome Institute (JGI) Joint Genome Institute (JGI) nicole-illumina-flowcell.jpg Key Challenges: Ensuring that there is a robust computational infrastructure for managing, storing and gleaning scientific insights from the torrent of data that constantly flows from the advanced sequencing platforms at the Department of Energy Joint Genome Institute (JGI). JGI sequencing capacity exceeds 40 billion DNA base pairs per year and is growing at a rate that exceeds computer hardware improvements, with exponential increases in computation and storage needed. JGI will generate about 1 petabyte of data in their first year as a NERSC partner; this is expected to double each year. Why it Matters: JGI is the primary production sequencing facility for the DOE. By revealing the genetic blueprint and fundamental principles that

64

US-Japan Joint Institute for Fusion Theory Annual Report of Activities  

E-Print Network (OSTI)

US-Japan Joint Institute for Fusion Theory Annual Report of Activities April 1, 1992­March 31, 1993 objective of the US-Japan Joint Institute for Fusion Theory (JIFT) program is to advance the theoretical scientist long-term visits, 45 topical workshops, and 45 joint computational projects. The topics and also

Ito, Atsushi

65

US-Japan Joint Institute for Fusion Theory Annual Report of Activities  

E-Print Network (OSTI)

US-Japan Joint Institute for Fusion Theory Annual Report of Activities April 1, 1994­March 31, 1995), and the Joint Institute for Fusion Theory (JIFT). The objectives of the JIFT program are: (1) to advance (three from each country), and a fluctuating number of joint computational projects (on the order

Ito, Atsushi

66

United States and Italy Sign Agreements to Advance Developments...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

nuclear power plants and improved cooperation on advanced nuclear energy systems and fuel cycle technologies in both countries. The U.S.-Italy Joint Declaration Concerning...

67

ABAA - 6th International Conference on Advanced Lithium Batteries...  

NLE Websites -- All DOE Office Websites (Extended Search)

of lithium batteries for transportation applications, organizers from U.S.A., Japan and Korea jointly initiated the International Conference on Advanced Lithium Batteries for...

68

Weather and Joints  

NLE Websites -- All DOE Office Websites (Extended Search)

Humidity and air pressure changes, which accompany changes in weather, can sometimes be felt in the human body, some people are affected more than others. Arthritis in joints...

69

Do Box Inverse Models Work?  

Science Conference Proceedings (OSTI)

The performance of a box inverse model is tested using output from a near-eddy-resolving numerical model. Conservation equations are written in isopycnal layers for three properties: mass, heat, and salt anomaly. If the equations are free of ...

Peter C. McIntosh; Stephen R. Rintoul

1997-02-01T23:59:59.000Z

70

Mesozoic tectonic inversion in the Neuquen Basin of west-central Argentina  

E-Print Network (OSTI)

Mesozoic tectonic inversion in the Neuquen Basin of west-central Argentina produced two main fault systems: (1) deep faults that affected basement and syn-rift strata where preexisting faults were selectively reactivated during inversion based on their length and (2) shallow faults that affected post-rift and syn-inversion strata. Normal faults formed at high angle to the reactivated half-graben bounding fault as a result of hangingwall expansion and internal deformation as it accommodated to the shape of the curved footwall during oblique inversion. Contraction during inversion was initially accommodated by folding and internal deformation of syn-rift sedimentary wedges, followed by displacement along half-graben bounding faults. We suspect that late during inversion the weight of the overburden inhibited additional fault displacement and folding became the shortening-accommodating mechanism. A Middle Jurassic inversion event produced synchronous uplift of inversion structures across the central Neuquen Basin. Later inversion events (during Late Jurassic, Early Cretaceous, and Late Cretaceous time) produced an "inversion front" that advanced north of the Huincul Arch. Synchroneity of fault reactivation during the Callovian inversion event may be related to efficient stress transmission north of the Huincul Arch, probably due to easy reactivation of low-dip listric fault segments. This required little strain accumulation along "proximal" inversion structures before shortening was transferred to more distal structures. Later inversion events found harderto- reactivate fault segments, resulting in proximal structures undergoing significant inversion before transferring shortening. The time between the end of rifting and the different inversion events may have affected inversion. Lithosphere was probably thermally weakened at the onset of the initial Callovian inversion phase, allowing stress transmission over a large distance from the Huincul Arch and causing synchronous inversion across the basin. Later inversion affected a colder and more viscous lithosphere. Significant strain needed to accumulate along proximal inversion structures before shortening was transferred to more distal parts of the basin. Timing of inversion events along the central Neuquen Basin suggest a megaregional control by right-lateral displacement motion along the Gastre Fault Zone, an intracontinental megashear zone thought to have been active prior to and during the opening of the South Atlantic Ocean.

Grimaldi Castro, Gabriel Orlando

2005-12-01T23:59:59.000Z

71

Articular human joint modelling  

Science Conference Proceedings (OSTI)

The work reported in this paper encapsulates the theories and algorithms developed to drive the core analysis modules of the software which has been developed to model a musculoskeletal structure of anatomic joints. Due to local bone surface and contact ... Keywords: 6DOF, Joint Modelling, Software, Tissue wrapping, bilateral, constraints, forced contact based articulation, unilateral

Ibrahim i. Esat; Neviman Ozada

2010-03-01T23:59:59.000Z

72

JOINT ELECTRICAL & COMPUTER ENGINEERING AND  

E-Print Network (OSTI)

JOINT ELECTRICAL & COMPUTER ENGINEERING AND PHYSICS COLLOQUIUM "Speckle Statistics, Coherence confirmation of the increase in the well- defined polarization state of the output radiation. In the joint

73

Joint Institutes | ornl.gov  

NLE Websites -- All DOE Office Websites (Extended Search)

Joint Institutes SHARE Joint Institutes ORNL, in partnership with the Science Alliance of the University of Tennessee, Knoxville, has a number of cooperative ventures in science...

74

Joining of advanced materials by superplastic deformation  

DOE Patents (OSTI)

A method for utilizing superplastic deformation with or without a novel joint compound that leads to the joining of advanced ceramic materials, intermetallics, and cermets. A joint formed by this approach is as strong as or stronger than the materials joined. The method does not require elaborate surface preparation or application techniques.

Goretta, Kenneth C. (Downers Grove, IL); Routbort, Jules L. (Hinsdale, IL); Gutierrez-Mora, Felipe (Woodridge, IL)

2008-08-19T23:59:59.000Z

75

New advances in three dimensional transient electromagnetic inversion  

E-Print Network (OSTI)

Users Guide Version 2.1, Sandia National Laboratories SandFormally affiliated with Sandia National Laboratories,Using 336 processors on the Sandia National Laboratory ASCII

Newman, Gregory A.; Commer, Michael

2004-01-01T23:59:59.000Z

76

Multiphase inverse modeling: An Overview  

DOE Green Energy (OSTI)

Inverse modeling is a technique to derive model-related parameters from a variety of observations made on hydrogeologic systems, from small-scale laboratory experiments to field tests to long-term geothermal reservoir responses. If properly chosen, these observations contain information about the system behavior that is relevant to the performance of a geothermal field. Estimating model-related parameters and reducing their uncertainty is an important step in model development, because errors in the parameters constitute a major source of prediction errors. This paper contains an overview of inverse modeling applications using the ITOUGH2 code, demonstrating the possibilities and limitations of a formalized approach to the parameter estimation problem.

Finsterle, S.

1998-03-01T23:59:59.000Z

77

High pressure ceramic joint  

DOE Patents (OSTI)

Many recuperators have components which react to corrosive gases and are used in applications where the donor fluid includes highly corrosive gases. These recuperators have suffered reduced life, increased service or maintenance, and resulted in increased cost. The present joint when used with recuperators increases the use of ceramic components which do not react to highly corrosive gases. Thus, the present joint used with the present recuperator increases the life, reduces the service and maintenance, and reduces the increased cost associated with corrosive action of components used to manufacture recuperators. The present joint is comprised of a first ceramic member, a second ceramic member, a mechanical locking device having a groove defined in one of the first ceramic member and the second ceramic member. The joint and the mechanical locking device is further comprised of a refractory material disposed in the groove and contacting the first ceramic member and the second ceramic member. The present joint mechanically provides a high strength load bearing joint having good thermal cycling characteristics, good resistance to a corrosive environment and good steady state strength at elevated temperatures.

Ward, Michael E. (Poway, CA); Harkins, Bruce D. (San Diego, CA)

1993-01-01T23:59:59.000Z

78

High pressure ceramic joint  

DOE Patents (OSTI)

Many recuperators have components which react to corrosive gases and are used in applications where the donor fluid includes highly corrosive gases. These recuperators have suffered reduced life, increased service or maintenance, and resulted in increased cost. The present joint when used with recuperators increases the use of ceramic components which do not react to highly corrosive gases. Thus, the present joint used with the present recuperator increases the life, reduces the service and maintenance, and reduces the increased cost associated with corrosive action of components used to manufacture recuperators. The present joint is comprised of a first ceramic member, a second ceramic member, a mechanical locking device having a groove defined in one of the first ceramic member and the second ceramic member. The joint and the mechanical locking device is further comprised of a refractory material disposed in the groove and contacting the first ceramic member and the second ceramic member. The present joint mechanically provides a high strength load bearing joint having good thermal cycling characteristics, good resistance to a corrosive environment and good steady state strength at elevated temperatures. 4 figures.

Ward, M.E.; Harkins, B.D.

1993-11-30T23:59:59.000Z

79

Advanced Materials  

NLE Websites -- All DOE Office Websites (Extended Search)

Advanced Materials Advanced Materials Availability Technology Express Licensing Active Terahertz Metamaterial Devices Express Licensing Anion-Conducting Polymer, Composition, And...

80

Inverse scattering problem with isobars  

SciTech Connect

The inverse scattering problem is solved for a covariant, isobar-dominated scattering amplitude (including inelasticity). Application is made to the ..pi..N P/sub 33/ channel, with the ..pi..N ..delta.. vertex function and isobar bare mass as results.

Londergan, J.T.; Moniz, E.J.

1977-08-01T23:59:59.000Z

Note: This page contains sample records for the topic "advanced joint inversion" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Stress inversion using slip tendency  

Science Conference Proceedings (OSTI)

The in situ stress state is an important controlling factor for the slip behavior of faults and fractures in the earth's crust and hence for the productivity of faulted and fractured hydrocarbon reservoirs. Current methods for stress tensor estimation ... Keywords: Slip tendency, Stress inversion, Stress tensor, Structural geology

John M. McFarland; Alan P. Morris; David A. Ferrill

2012-04-01T23:59:59.000Z

82

A Numerical Study of Inversion-Layer Breakup and the Effects of Topographic Shading in Idealized Valleys  

Science Conference Proceedings (OSTI)

Numerical simulations of inversion-layer breakup in idealized steep valleys are performed using the Advanced Regional Prediction System (ARPS) to investigate the effects of valley width and depth, and topographic shade. Simulations of the diurnal ...

Augustin Colette; Fotini Katopodes Chow; Robert L. Street

2003-09-01T23:59:59.000Z

83

Joint Theory Institute  

NLE Websites -- All DOE Office Websites (Extended Search)

Program General Info Program General Info Registration Info Directions to Argonne Dynamics of Symmetry Breaking A Workshop sponsored by the ANL/UChicago Joint Theory Institute April 13-17, 2009 Argonne National Laboratory, IL The Joint Theory Institute (JTI) is a multi-disciplinary research institution jointly supported at the University of Chicago and Argonne National Laboratory to enhance collaborative research between both institutions in the broad area of theory. This year JTI sponsors a workshop the aim of which is to explore the dynamics of symmetry breaking in a broad range of systems from nuclear physics to string theory, using theoretical insights such as Dyson-Schwinger equations formalism, gauge/gravity duality and lattice QCD. We will focus on systems which exhibit dynamical symmetry breaking and will cover topics essential for understanding nonperturbative QCD and physics of quark-gluon plasma.

84

Temperature Inversions in the Subarctic North Pacific  

Science Conference Proceedings (OSTI)

Hydrographic data from the World Ocean Database 2001 and Argo profiling floats were analyzed to study temperature inversions in the subarctic North Pacific Ocean. The frequency distribution of temperature inversions [F(t-inv)] at a resolution of ...

Hiromichi Ueno; Ichiro Yasuda

2005-12-01T23:59:59.000Z

85

The inversion algorithm for digital simulation  

Science Conference Proceedings (OSTI)

The inversion algorithm is an event-driven algorithm, whose performance rivals or exceeds that of levelized compiled code simulation, even at activity rates of 50% or more. The inversion algorithm has several unique features, the most remarkable of which ...

P. M. Maurer

2006-11-01T23:59:59.000Z

86

Generalized inversion and theory of agree  

E-Print Network (OSTI)

In this thesis I examine some of the fundamental questions surrounding inversion structures. I first provide an analysis of Locative Inversion. I show that the mixed A- and A- syntactic behavior of the fronted PP in English ...

Wu, Hsiao-hung Iris

2008-01-01T23:59:59.000Z

87

Numerical Transform Inversion Using Gaussian Quadrature  

Science Conference Proceedings (OSTI)

Numerical inversion of Laplace transforms is a powerful tool in computational probability. It greatly enhances the applicability of stochastic models in many fields. In this article we present a simple Laplace transform inversion algorithm that can compute ...

Peter Den Iseger

2006-01-01T23:59:59.000Z

88

Theoretical analysis of inverse weibull distribution  

Science Conference Proceedings (OSTI)

In this study we present the theoretical analysis of Inverse weibull distribution. This paper presents the flexibility of the Inverse weibull distribution that approaches to different distributions. Here we compare the relevant parameters such as shape, ... Keywords: graphically analysis, inverse weibull distribution, simulation analysis

M. Shuaib Khan; G. R. Pasha; Ahmed Hesham Pasha

2008-02-01T23:59:59.000Z

89

Weather and Joints  

NLE Websites -- All DOE Office Websites (Extended Search)

Weather and Joints Weather and Joints Name: Brittany Location: N/A Country: N/A Date: N/A Question: Why do people feel the weather changin in their joints? Is it just a superstition? Replies: People feel weather changes in their bodies because storm systems are accompanied by lower air pressure. When a storm system is approaching the barometric pressure or air pressure will drop. Inside the body is air pressure also. The pressure inside the body is approximately 15 lbs per square inch. Normal air pressure on the outside is approximately the same. When both numbers are equal most people don't feel anything. However, when the low pressure system approaches or the air pressure drops, the pressure on the inside of the body is greater than outside and that air on the inside tries to get out because air flows from high pressure to low pressure. This causes swelling and discomfort in some people's joints, especially in the elderly or people who have suffered injuries to those areas (those areas are weakened somewhat due to the injury and less resistant to the changes in pressure).

90

Three-Dimensional Inversion of Magnetotelluric Data on a PC,...  

Open Energy Info (EERE)

additional parameters solved in the inversion. Initial inversion results for the Coso data set qualitatively resemble previous models from 2-D inversion stitches and from massively...

91

JIBS | Joint Institute for Biological Sciences | ORNL  

NLE Websites -- All DOE Office Websites (Extended Search)

Joint Institute for Biological Sciences SHARE Joint Institute for Biological Sciences The Joint Institute of ORNL and the University of Tennessee has a single mission: to enable...

92

Rolling contact orthopaedic joint design  

E-Print Network (OSTI)

Arthroplasty, the practice of rebuilding diseased biological joints using engineering materials, is often used to treat severe arthritis of the knee and hip. Prosthetic joints have been created in a "biomimetic" manner to ...

Slocum, Alexander Henry, Jr

2013-01-01T23:59:59.000Z

93

ADVANCED CUTTINGS TRANSPORT STUDY  

DOE Green Energy (OSTI)

This report includes a review of the progress made in ACTF Flow Loop development and research during 90 days pre-award period (May 15-July 14, 1999) and the following three months after the project approval date (July15-October 15, 1999) The report presents information on the following specific subjects; (a) Progress in Advanced Cuttings Transport Facility design and development, (b) Progress report on the research project ''Study of Flow of Synthetic Drilling Fluids Under Elevated Pressure and Temperature Conditions'', (c) Progress report on the research project ''Study of Cuttings Transport with Foam Under LPAT Conditions (Joint Project with TUDRP)'', (d) Progress report on the research project ''Study of Cuttings Transport with Aerated Muds Under LPAT Conditions (Joint Project with TUDRP)'', (e) Progress report on the research project ''Study of Foam Flow Behavior Under EPET Conditions'', (f) Progress report on the instrumentation tasks (Tasks 11 and 12) (g) Activities towards technology transfer and developing contacts with oil and service company members.

Ergun Kuru; Stefan Miska; Nicholas Takach; Kaveh Ashenayi; Gerald Kane; Len Volk; Mark Pickell; Evren Ozbayoglu; Barkim Demirdal; Paco Vieira; Affonso Lourenco

1999-10-15T23:59:59.000Z

94

Double slotted socket spherical joint  

DOE Patents (OSTI)

A new class of spherical joints is disclosed. These spherical joints are capable of extremely large angular displacements (full cone angles in excess of 270.degree.), while exhibiting no singularities or dead spots in their range of motion. These joints can improve or simplify a wide range of mechanical devices.

Bieg, Lothar F. (Albuquerque, NM); Benavides, Gilbert L. (Albuquerque, NM)

2001-05-22T23:59:59.000Z

95

Advanced drilling systems study  

DOE Green Energy (OSTI)

This work was initiated as part of the National Advanced Drilling and Excavation Technologies (NADET) Program. It is being performed through joint finding from the Department of Energy Geothermal Division and the Natural Gas Technology Branch, Morgantown Energy Technology Center. Interest in advanced drilling systems is high. The Geothermal Division of the Department of Energy has initiated a multi-year effort in the development of advanced drilling systems; the National Research Council completed a study of drilling and excavation technologies last year; and the MIT Energy Laboratory recently submitted a proposal for a national initiative in advanced drilling and excavation research. The primary reasons for this interest are financial. Worldwide expenditures on oil and gas drilling approach $75 billion per year. Also, drilling and well completion account for 25% to 50% of the cost of producing electricity from geothermal energy. There is incentive to search for methods to reduce the cost of drilling. Work on ideas to improve or replace rotary drilling technology dates back at least to the 1930`s. There was a significant amount of work in this area in the 1960`s and 1970`s; and there has been some continued effort through the 1980`s. Undoubtedly there are concepts for advanced drilling systems that have yet to be studied; however, it is almost certain that new efforts to initiate work on advanced drilling systems will build on an idea or a variation of an idea that has already been investigated. Therefore, a review of previous efforts coupled with a characterization of viable advanced drilling systems and the current state of technology as it applies to those systems provide the basis for the current study of advanced drilling.

Pierce, K.G. [Sandia National Labs., Albuquerque, NM (United States); Livesay, B.J. [Livesay Consultants, San Diego, CA (United States)

1995-03-01T23:59:59.000Z

96

Horizontal Advanced Tensiometer  

DOE Patents (OSTI)

An horizontal advanced tensiometer is described that allows the monitoring of the water pressure of soil positions, particularly beneath objects or materials that inhibit the use of previous monitoring wells. The tensiometer includes a porous cup, a pressure transducer (with an attached gasket device), an adaptive chamber, at least one outer guide tube which allows access to the desired horizontal position, a transducer wire, a data logger and preferably an inner guide tube and a specialized joint which provides pressure on the inner guide tube to maintain the seal between the gasket of the transducer and the adaptive chamber.

Hubbell, Joel M.; Sisson, James B.

2004-06-22T23:59:59.000Z

97

Laser Extinction in Laminar Inverse Diffusion Flames  

E-Print Network (OSTI)

Diagnostics, Chapter 9: Laser-Induced Incandescence,Laser Extinction in Laminar Inverse Diffusion Flames WesternFoundation, Arlington, VA Laser Extinction in Laminar

Macko, Kevin; Mikofski, Mark A; Fernandez-Pello, Carlos; Blevins, Linda G; Davis, Ronald W.

2005-01-01T23:59:59.000Z

98

Jet Joint Undertaking  

E-Print Network (OSTI)

Recent experience with the use of tritium fuel in the Tokamak Fusion Test Reactor and the Joint European Torus, together with progress in developing the technical design of the International Thermonuclear Experimental Reactor has expanded the technical knowledge base for tritium issues in fusion. This paper reports on an IEA workshop that brought together scientists and engineers to share experience and expertise on all fusion related tritium issues. Extensive discussion periods were devoted to exploring outstanding issues and identifying potential R&D avenues to address them. This paper summarizes the presentations, discussions and recommendations.

C H Skinner; C Gentile; J Hosea; D Mueller; P Coad; Abingdon Ox Ea; G Federici; Garching Germany; R Haange

1998-01-01T23:59:59.000Z

99

Metal to ceramic sealed joint  

DOE Patents (OSTI)

A metal to ceramic sealed joint which can withstand wide variations in temperature and maintain a good seal is provided for use in a device adapted to withstand thermal cycling from about 20 to about 1000 degrees C. The sealed joint includes a metal member, a ceramic member having an end portion, and an active metal braze forming a joint to seal the metal member to the ceramic member. The joint is positioned remote from the end portion of the ceramic member to avoid stresses at the ends or edges of the ceramic member. The sealed joint is particularly suited for use to form sealed metal to ceramic joints in a thermoelectric generator such as a sodium heat engine where a solid ceramic electrolyte is joined to metal parts in the system.

Lasecki, John V. (Livonia, MI); Novak, Robert F. (Farmington Hills, MI); McBride, James R. (Ypsilanti, MI)

1991-01-01T23:59:59.000Z

100

Metal to ceramic sealed joint  

DOE Patents (OSTI)

A metal to ceramic sealed joint which can withstand wide variations in temperature and maintain a good seal is provided for use in a device adapted to withstand thermal cycling from about 20 to about 1000 degrees C. The sealed joint includes a metal member, a ceramic member having an end portion, and an active metal braze forming a joint to seal the metal member to the ceramic member. The joint is positioned remote from the end portion of the ceramic member to avoid stresses at the ends or edges of the ceramic member. The sealed joint is particularly suited for use to form sealed metal to ceramic joints in a thermoelectric generator such as a sodium heat engine where a solid ceramic electrolyte is joined to metal parts in the system. 11 figures.

Lasecki, J.V.; Novak, R.F.; McBride, J.R.

1991-08-27T23:59:59.000Z

Note: This page contains sample records for the topic "advanced joint inversion" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

DOE-EERC jointly sponsored research program  

Science Conference Proceedings (OSTI)

U.S. Department of Energy (DOE) Cooperative Agreement DE-FC21-93MC30098 funded through the Office of Fossil Energy and administered at the Federal Energy Technology Center (FETC) supported the performance of a Jointly Sponsored Research Program (JSRP) at the Energy and Environmental Research Center (EERC) with a minimum 50% nonfederal cost share to assist industry in commercializing and effectively applying efficient, nonpolluting energy technologies that can compete effectively in meeting market demands for clean fuels, chemical feedstocks, and electricity in the 21st century. The objective of the JSRP was to advance the deployment of advanced technologies for improving energy efficiency and environmental performance through jointly sponsored research on topics that would not be adequately addressed by the private sector alone. Examples of such topics include the barriers to hot-gas cleaning impeding the deployment of high-efficiency power systems and the search for practical means for sequestering CO{sub 2} generated by fossil fuel combustion. The selection of particular research projects was guided by a combination of DOE priorities and market needs, as provided by the requirement for joint venture funding approved both by DOE and the private sector sponsor. The research addressed many different energy resource and related environmental problems, with emphasis directed toward the EERC's historic lead mission in low-rank coals (LRCs), which represent approximately half of the U.S. coal resources in the conterminous states, much larger potential resources in Alaska, and a major part of the energy base in the former U.S.S.R., East Central Europe, and the Pacific Rim. The Base and JSRP agreements were tailored to the growing awareness of critical environmental issues, including water supply and quality, air toxics (e.g., mercury), fine respirable particulate matter (PM{sub 2.5}), and the goal of zero net CO{sub 2} emissions.

Hendrikson, J.G.; Sondreal, E.A.

1999-09-01T23:59:59.000Z

102

JOINT OFFICER MANAGEMENT PROGRAM PROCEDURES  

E-Print Network (OSTI)

implementation of the DOD Joint Officer Management (JOM) and Joint Qualification System (JQS) per references a through c. Reference a delegates the authority to the Chairman of the Joint Chiefs of Staff to establish and publish regulations and procedures to ensure compliance with the statutory and Department policy standards for DOD’s JOM program. 2. Cancellation. CJCSI 1330.02C, 24 February 2006, is cancelled. Required review of promotion selection board results policy guidance has been incorporated in this instruction.

References See Enclosure N; Responsibilities For

2008-01-01T23:59:59.000Z

103

Structural fabric of the Palisades Monocline: a study of positive inversion, Grand Canyon, Arizona  

E-Print Network (OSTI)

A field study of positive inversion is conducted to describe associated structural fabrics and to infer kinematic development of the Palisades Monocline, Grand Canyon, Arizona. These features are then compared to sand, clay and solid rock models of positive inversion to test model results and improve understanding of inversion processes. The N40W 90 oriented Palisades fault underlying the monocline has experienced northeast-southwest Precambrian extension and subsequent northeastsouthwest Laramide contraction. The magnitude of inversion is estimated to be 25% based on vertical offset across the fault, although this does not account for flexure or horizontal shortening. The preferred N50W 90 joint and vein orientation and N50W 68 NE and SW conjugate normal faults are consistent with the Palisades fault and northeastsouthwest extension. The N45E 90 joint orientation and approximately N40W 28 NE and SW conjugate thrust faults are consistent with northeast-southwest contraction. The deformation is characterized by three domains across the fault zone: 1) the hanging wall, 2) the footwall, and 3) an interior, fault-bounded zone between the hanging wall and footwall. Extensional features are preserved and dominate the hanging wall, contractional features define footwall deformation, and the interior, fault-bounded zone is marked by the co-existence of extensional and contractional features. Extension caused a master normal fault and hanging wall roll-over with distributed joints, veinsand normal faults. During inversion, contraction induced reverse reactivation of existing hanging wall faults, footwall folding and footwall thrust-faulting. Precambrian normal slip along the master normal fault and subsequent Laramide reverse slip along the new footwall bounding fault created an uplifted domain of relatively oldest strata between the hanging wall and footwall. Physical models of co-axial inversion suggest consistent development of the three domains of deformation described at the Palisades fault, however the models often require magnitudes of inversion greater than 50%. Although vertical block motion during horizontal compression is not predicted directly by the Mohr-Coulomb criterion, physical models and analytical solutions (incorporating Mohr- Coulomb criterion) suggest maximum stress trajectories and near vertical failure above high angle basement faults that compare favorably with the Palisades fault zone.

Orofino, James Cory

2006-05-01T23:59:59.000Z

104

Approximation of Bayesian Inverse Problems for PDEs  

Science Conference Proceedings (OSTI)

Inverse problems are often ill posed, with solutions that depend sensitively on data. In any numerical approach to the solution of such problems, regularization of some form is needed to counteract the resulting instability. This paper is based on an ... Keywords: Bayesian, Markov chain-Monte Carlo, Stokes flow, data assimilation, inverse problem

S. L. Cotter; M. Dashti; A. M. Stuart

2010-04-01T23:59:59.000Z

105

Department of Mathematics Analysis Inverse Problems  

E-Print Network (OSTI)

McLaughlin In this talk we report the application of level-set techniques for reservoir facies for data inversion in reservoir modeling, Inverse Problems, 25 (2009), 035006. [4] M. A. Iglesias and D. McLaughlin.40­14.05 Anastasia Cornelio (Modena, Italy) Regularized Nonlinear Least Squares Methods for Hit Position

Hofmann, Bernd

106

Positive and inverse isotope effect on superconductivity  

E-Print Network (OSTI)

This article improves the BCS theory to include the inverse isotope effect on superconductivity. An affective model can be deduced from the model including electron-phonon interactions, and the phonon-induced attraction is simply and clearly explained on the electron Green function. The focus of this work is on how the positive or inverse isotope effect occurs in superconductors.

Tian De Cao

2009-09-04T23:59:59.000Z

107

CRUCIFORM CONTROL ROD JOINT  

DOE Patents (OSTI)

An invention is described which relates to nuclear reactor control rod components and more particularly to a joint between cruciform control rod members and cruciform control rod follower members. In one embodiment this invention provides interfitting crossed arms at adjacent ends of a control rod and its follower in abutting relation. This holds the members against relative opposite longitudinal movement while a compression member keys the arms against relative opposite rotation around a common axis. Means are also provided for centering the control rod and its follower on a common axis and for selectively releasing the control rod from its follower for the insertion of a replacement of the control rod and reuse of the follower. (AEC)

Thorp, A.G. II

1962-08-01T23:59:59.000Z

108

Development of an Advanced Hydraulic Fracture Mapping System  

Science Conference Proceedings (OSTI)

The project to develop an advanced hydraulic fracture mapping system consisted of both hardware and analysis components in an effort to build, field, and analyze combined data from tiltmeter and microseismic arrays. The hardware sections of the project included: (1) the building of new tiltmeter housings with feedthroughs for use in conjunction with a microseismic array, (2) the development of a means to use separate telemetry systems for the tilt and microseismic arrays, and (3) the selection and fabrication of an accelerometer sensor system to improve signal-to-noise ratios. The analysis sections of the project included a joint inversion for analysis and interpretation of combined tiltmeter and microseismic data and improved methods for extracting slippage planes and other reservoir information from the microseisms. In addition, testing was performed at various steps in the process to assess the data quality and problems/issues that arose during various parts of the project. A prototype array was successfully tested and a full array is now being fabricated for industrial use.

Norm Warpinski; Steve Wolhart; Larry Griffin; Eric Davis

2007-01-31T23:59:59.000Z

109

Joint Fuel Cell Technologies and Advanced Manufacturing Webinar  

NLE Websites -- All DOE Office Websites (Extended Search)

development and demonstration, and diverse efforts to overcome institutional and market challenges. Key Goals : Develop hydrogen and fuel cell technologies for: 1. Early...

110

Advanced thermionic energy conversion: joint highlights and status report  

DOE Green Energy (OSTI)

Research discussed includes the experimental study of the effects of structured electrodes on converter performance, an experimental study of a cylindrical converter, an analysis of the operating characteristics of the plasmatron, and the high current zero power converter (ZEPO) test. (WHK)

Not Available

1976-06-01T23:59:59.000Z

111

Inverse modeling of CO2 sources and sinks using satellite observations of CO2 from TES and surface flask measurements  

SciTech Connect

We infer CO2 surface fluxes using satellite observations of mid-tropospheric CO2 from the Tropospheric Emission Spectrometer (TES) and measurements of CO2 from surface flasks in a time-independent inversion analysis based on the GEOS-Chem model. Using TES CO2 observations over oceans, spanning 40 S 40 N, we find that the horizontal and vertical coverage of the TES and flask data are complementary. This complementarity is demonstrated by combining the datasets in a joint inversion, which provides better constraints than from either dataset alone, when a posteriori CO2 distributions are evaluated against independent ship and aircraft CO2 data. In particular, the joint inversion offers improved constraints in the tropics where surface measurements are sparse, such as the tropical forests of South America. Aggregating the annual surface-to-atmosphere fluxes from the joint inversion for the year 2006 yields 1.13 0.21 PgC for the global ocean, 2.77 0.20 PgC for the global land biosphere and 3.90 0.29 PgC for the total global natural flux (defined as the sum of all biospheric, oceanic, and biomass burning contributions but excluding CO2 emissions from fossil fuel combustion). These global ocean and global land fluxes are shown to be near the median of the broad range of values from other inversion results for 2006. To achieve these results, a bias in TES CO2 in the Southern Hemisphere was assessed and corrected using aircraft flask data, and we demonstrate that our results have low sensitivity to variations in the bias correction approach. Overall, this analysis suggests that future carbon data assimilation systems can benefit by integrating in situ and satellite observations of CO2 and that the vertical information provided by satellite observations of mid-tropospheric CO2 combined with measurements of surface CO2, provides an important additional constraint for flux inversions.

Nassar, Ray [University of Toronto; Jones, DBA [University of Toronto; Kulawik, SS [Jet Propulsion Laboratory, Pasadena, CA; Worden, JR [Jet Propulsion Laboratory, Pasadena, CA; Bowman, K [Jet Propulsion Laboratory, Pasadena, CA; Andres, Robert Joseph [ORNL; Suntharalingam, P [University of East Anglia, Norwich, United Kingdom; Chen, j. [University of Toronto; Brenninkmeijer, CAM [Max Planck Institut fur Chemie, Mainz; Schuck, TJ [Max Planck Institut fur Chemie, Mainz; Conway, T.J. [NOAA, Boulder, CO; Worthy, DE [Environment Canada

2011-01-01T23:59:59.000Z

112

Advanced Gasification  

NLE Websites -- All DOE Office Websites (Extended Search)

Advanced Gasification Carbon feedstock gasification is a promising pathway for high-efficiency, low-pollutant power generation and chemical production. The inability, however, to...

113

Advanced Ceramics  

Science Conference Proceedings (OSTI)

Table 3   Raw materials for advanced structural and magnetic (ferrite) ceramics...conductivity Wear resistance Oxygen sensors, fuel cells (potential), high-temperature

114

Advanced Manufacturing  

Science Conference Proceedings (OSTI)

... new metrologically-based methods for industry as well ... for Advanced Catalyst Development and Durability ... Electron-Beam Irradiation of Solar Cells. ...

2013-07-29T23:59:59.000Z

115

Inverse Raman effect: applications and detection techniques  

SciTech Connect

The processes underlying the inverse Raman effect are qualitatively described by comparing it to the more familiar phenomena of conventional and stimulated Raman scattering. An experession is derived for the inverse Raman absorption coefficient, and its relationship to the stimulated Raman gain is obtained. The power requirements of the two fields are examined qualitatively and quantitatively. The assumption that the inverse Raman absorption coefficient is constant over the interaction length is examined. Advantages of the technique are discussed and a brief survey of reported studies is presented.

Hughes, L.J. Jr.

1980-08-01T23:59:59.000Z

116

Inverse hyperbolic problems and optical black holes  

E-Print Network (OSTI)

In this paper we give a more geometrical formulation of the main theorem in [E1] on the inverse problem for the second order hyperbolic equation of general form with coefficients independent of the time variable. We apply this theorem to the inverse problem for the equation of the propagation of light in a moving medium (the Gordon equation). Then we study the existence of black and white holes for the general hyperbolic and for the Gordon equation and we discuss the impact of this phenomenon on the inverse problems.

Gregory Eskin

2008-09-23T23:59:59.000Z

117

Inversion-free, noiseless Raman echoes  

E-Print Network (OSTI)

Using double optical Raman rephasing, an inversion-free resonant Raman echo is studied in an inhomogeneously broadened spin ensemble of a solid medium, where the Raman optical field-excited spin coherence has a frozen propagation vector. Unlike photon echoes whose quantum memory application is strictly limited due to \\pi rephasing pulse-induced population inversion causing quantum noises, the optical Raman field-excited spin echo is inherently silent owing to the frozen propagation vector. Thus, the doubly rephased Raman echo can be directly applied for quantum interface in a population inversion-free environment.

Byoung S. Ham

2011-11-20T23:59:59.000Z

118

2014 Joint Action Workshop | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

2014 Joint Action Workshop 2014 Joint Action Workshop January 12, 2014 8:00AM EST to January 14, 2014 5:00PM EST Palm Desert, California The Joint Action Workshop is an annual...

119

Geophys. J. Int. (2000) 142, 000000 Nonlinear Bayesian joint inversion of seismic reflection  

E-Print Network (OSTI)

: Measurements in coaxial transmission lines, Water Resour. Res., 16, 574­582, 1980. van Genuchten, M. T conductivity was reported for the site (a standard deviation of 647 cm/d around a mean of 533 cm of clear acrylic plastic and sealed with rubber o-rings and lining. Prior to use, one side of the tank

Ursin, Bjørn

120

Joint inversion of geophysical and hydrological data for improved subsurface characterization  

E-Print Network (OSTI)

Department of Energy (DOE) Hanford site in Washington aslocations at the U.S. DOE Hanford 200 East site (Sisson andduring water injection at Hanford site include (a) water

Kowalsky, Michael B.; Chen, Jinsong; Hubbard, Susan S.

2006-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "advanced joint inversion" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

DOE Joint Genome Institute Completes Soybean Genome- Data Released to  

NLE Websites -- All DOE Office Websites (Extended Search)

Press Release: December 8, 2008 Press Release: December 8, 2008 DOE Joint Genome Institute Completes Soybean Genome- Data Released to Advance Biofuel, Food, & Feed Research WALNUT CREEK, CA- The U.S. Department of Energy Joint Genome Institute (DOE JGI) has released a complete draft assembly of the soybean (Glycine max) genetic code, making it widely available to the research community to advance new breeding strategies for one of the world's most valuable plant commodities. Soybean not only accounts for 70 percent of the world's edible protein, but also is an emerging feedstock for biodiesel production. Soybean is second only to corn as an agricultural commodity and is the leading U.S. agricultural export. DOE JGI's interest in sequencing the soybean centers on its use for biodiesel, a renewable, alternative fuel with the highest energy content of

122

The distribution of inversion lengths in bacteria  

Science Conference Proceedings (OSTI)

The distribution of the lengths of genomic segments inverted during the evolutionary divergence of two species cannot be inferred directly from the output of genome rearrangement algorithms, due to the rapid loss of signal from all but the shortest inversions. ...

David Sankoff; Jean-François Lefebvre; Elisabeth Tillier; Adrian Maler; Nadia El-Mabrouk

2004-10-01T23:59:59.000Z

123

Instrumentation and algorithms for electrostatic inverse problems  

E-Print Network (OSTI)

This thesis describes tracking objects with low-level electric fields. A physical model is presented that describes the important interactions and the required mathematical inversions. Sophisticated hardware used to perform ...

Strachan, John Paul, 1978-

2001-01-01T23:59:59.000Z

124

Efficient Inverse Modeling of Barotropic Ocean Tides  

Science Conference Proceedings (OSTI)

A computationally efficient relocatable system for generalized inverse (GI) modeling of barotropic ocean tides is described. The GI penalty functional is minimized using a representer method, which requires repeated solution of the forward and ...

Gary D. Egbert; Svetlana Y. Erofeeva

2002-02-01T23:59:59.000Z

125

Potential Vorticity Inversion on a Hemisphere  

Science Conference Proceedings (OSTI)

Several different kinds of accurate potential vorticity (PV) inversion operators, and the associated balanced models, are tested for the shallow water equations on a hemisphere in an attempt to approach the ultimate limitations of the balance, ...

Michael E. McIntyre; Warwick A. Norton

2000-05-01T23:59:59.000Z

126

Washington Joint Aquatic Resources Permit Application (JARPA...  

Open Energy Info (EERE)

Washington Joint Aquatic Resources Permit Application (JARPA) Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- OtherOther: Washington Joint...

127

A fluorophosphate-based inverse Keggin structure  

SciTech Connect

An unusual PFO(3)(2-)-templated "inverse Keggin" polyanion, [Mo(12)O(46)(PF)(4)](4-), has been isolated from the degradation reaction of an {Mo(132)}-type Keplerate to [PMo(12)O(40)](3-) by [Cu(MeCN)(4)](PF(6)) in acetonitrile. (31)P-NMR studies suggest a structure-directing role for [Cu(MeCN)(4)](+) in the formation of the highly unusual all-inorganic inverse Keggin structure.

Fielden, John; Quasdorf, Kyle; Cronin, Leroy; Kogerler, Paul

2012-07-17T23:59:59.000Z

128

The second skin approach : skin strain field analysis and mechanical counter pressure prototyping for advanced spacesuit design  

E-Print Network (OSTI)

The primary aim of this thesis is to advance the theory of advanced locomotion mechanical counter pressure (MCP) spacesuits by studying the changes in the human body shape during joint motion. Two experiments take advantage ...

Bethke, Kristen (Kristen Ann)

2005-01-01T23:59:59.000Z

129

Iterative inverse kinematics with manipulator configuration control  

Science Conference Proceedings (OSTI)

A new method, termed the offset modification method (OM method), for solving the manipulator inverse kinematics problem is presented. The OM method works by modifying the link offset values of a manipulator until it is possible to derive closed-form inverse kinematics equations for the resulting manipulator (termed the model manipulator). This procedure allows one to derive a set of three nonlinear equations in three unknowns that, when numerically solved, give an inverse kinematics solution for the original manipulator. The OM method can be applied to manipulators with any number of degrees of freedom, as long as the manipulator satisfies a given set of conditions (Theorem 1). The OM method is tested on a 6-degree-of-freedom manipulator that has no known closed-form inverse kinematics equations. It is shown that the OM method is applicable to real-time manipulator control, can be used to guarantee convergence to a desired endpoint position and orientation (if it exists), and allows one to directly choose which inverse kinematics solution the algorithm will converge to (as specified in the model manipulator closed-form inverse kinematics equations). Applications of the method to other 6-DOF manipulator geometries and to redundant manipulators (i.e. greater than 6 DOF geometries) are discussed.

Grudic, G.Z.; Lawrence, P.D. [Univ. of British Columbia, Vancouver, British Columbia (Canada). Dept. of Electrical Engineering] [Univ. of British Columbia, Vancouver, British Columbia (Canada). Dept. of Electrical Engineering

1993-08-01T23:59:59.000Z

130

Challenges with jointed-pipe underbalanced operations  

Science Conference Proceedings (OSTI)

Successful underbalanced operations demand a systematic approach with integration of engineering, operations, production, reservoir, and geology. There are significant advantages to underbalanced drilling (UD). Formation damage can be minimized if proper circulating fluids and operating parameters are chosen; there is an opportunity for reservoir evaluation and characterization while drilling; lost circulation and differential sticking can be avoided, combined with improvements in drilling rate of penetration (ROP); and it also provides an alternative method of well control. This paper discusses engineering challenges and considerations for underbalanced operations using multiphase flow as well as advances made during UD with rotary jointed pipe. Excluding air, mist, and foam, underbalanced techniques with multiphase fluids are reviewed. Much of the discussion and concepts also apply to coiled-tubing underbalanced operations.

Saponja, J.

1998-06-01T23:59:59.000Z

131

Advanced Materials  

NLE Websites -- All DOE Office Websites (Extended Search)

Advanced Materials Advanced Materials Advanced Materials Express Licensing Active Terahertz Metamaterial Devices Express Licensing Anion-Conducting Polymer, Composition, And Membrane Express Licensing Analysis Of Macromolecule, Liggands And Macromolecule-Lingand Complexes Express Licensing Carbon Microtubes Express Licensing Chemical Synthesis Of Chiral Conducting Polymers Express Licensing Forming Adherent Coatings Using Plasma Processing Express Licensing Hydrogen Scavengers Express Licensing Laser Welding Of Fused Quartz Express Licensing Multiple Feed Powder Splitter Negotiable Licensing Boron-10 Neutron Detectors for Helium-3 Replacement Negotiable Licensing Insensitive Extrudable Explosive Negotiable Licensing Durable Fuel Cell Membrane Electrode Assembly (MEA) Express Licensing Method of Synthesis of Proton Conducting Materials

132

Advanced drilling systems study.  

Science Conference Proceedings (OSTI)

This report documents the results of a study of advanced drilling concepts conducted jointly for the Natural Gas Technology Branch and the Geothermal Division of the U.S. Department of Energy. A number of alternative rock cutting concepts and drilling systems are examined. The systems cover the range from current technology, through ongoing efforts in drilling research, to highly speculative concepts. Cutting mechanisms that induce stress mechanically, hydraulically, and thermally are included. All functions necessary to drill and case a well are considered. Capital and operating costs are estimated and performance requirements, based on comparisons of the costs for alternative systems to conventional drilling technology, are developed. A number of problems common to several alternatives and to current technology are identified and discussed.

Pierce, Kenneth G.; Livesay, Billy Joe; Finger, John Travis (Livesay Consultants, Encintas, CA)

1996-05-01T23:59:59.000Z

133

ADVANCED CUTTINGS TRANSPORT STUDY  

SciTech Connect

This is the second quarterly progress report for Year 2 of the ACTS project. It includes a review of progress made in Flow Loop development and research during the period of time between Oct 1, 2000 and December 31, 2000. This report presents a review of progress on the following specific tasks: (a) Design and development of an Advanced Cuttings Transport Facility (Task 2: Addition of a foam generation and breaker system), (b) Research project (Task 6): ''Study of Cuttings Transport with Foam Under LPAT Conditions (Joint Project with TUDRP)'', (c) Research project (Task 7): ''Study of Cuttings Transport with Aerated Muds Under LPAT Conditions (Joint Project with TUDRP)'', (d) Research project (Task 8): ''Study of Flow of Synthetic Drilling Fluids Under Elevated Pressure and Temperature Conditions'', (e) Research project (Task 9): ''Study of Foam Flow Behavior Under EPET Conditions'', (f) Research project (Task 10): ''Study of Cuttings Transport with Aerated Mud Under Elevated Pressure and Temperature Conditions'', (g) Research on instrumentation tasks to measure: Cuttings concentration and distribution in a flowing slurry (Task 11), and Foam properties while transporting cuttings. (Task 12), (h) Development of a Safety program for the ACTS Flow Loop. Progress on a comprehensive safety review of all flow-loop components and operational procedures. (Task 1S). (i) Activities towards technology transfer and developing contacts with Petroleum and service company members, and increasing the number of JIP members. The tasks Completed During This Quarter are Task 7 and Task 8.

Troy Reed; Stefan Miska; Nicholas Takach; Kaveh Ashenayi; Gerald Kane; Mark Pickell; Len Volk; Mike Volk; Barkim Demirdal; Affonso Lourenco; Evren Ozbayoglu; Paco Vieira; Lei Zhou

2000-01-30T23:59:59.000Z

134

ADVANCED CUTTINGS TRANSPORT STUDY  

Science Conference Proceedings (OSTI)

This is the first quarterly progress report for Year 2 of the ACTS project. It includes a review of progress made in Flow Loop development and research during the period of time between July 14, 2000 and September 30, 2000. This report presents information on the following specific tasks: (a) Progress in Advanced Cuttings Transport Facility design and development (Task 2), (b) Progress on research project (Task 8): ''Study of Flow of Synthetic Drilling Fluids Under Elevated Pressure and Temperature Conditions'', (c) Progress on research project (Task 6): ''Study of Cuttings Transport with Foam Under LPAT Conditions (Joint Project with TUDRP)'', (d) Progress on research project (Task 7): ''Study of Cuttings Transport with Aerated Muds Under LPAT Conditions (Joint Project with TUDRP)'', (e) Progress on research project (Task 9): ''Study of Foam Flow Behavior Under EPET Conditions'', (f) Initiate research on project (Task 10): ''Study of Cuttings Transport with Aerated Mud Under Elevated Pressure and Temperature Conditions'', (g) Progress on instrumentation tasks to measure: Cuttings concentration and distribution (Tasks 11), and Foam properties (Task 12), (h) Initiate a comprehensive safety review of all flow-loop components and operational procedures. Since the previous Task 1 has been completed, we will now designate this new task as: (Task 1S). (i) Activities towards technology transfer and developing contacts with Petroleum and service company members, and increasing the number of JIP members.

Troy Reed; Stefan Miska; Nicholas Takach; Kaveh Ashenayi; Gerald Kane; Mark Pickell; Len Volk; Mike Volk; Barkim Demirdal; Affonso Lourenco; Evren Ozbayoglu; Paco Vieira

2000-10-30T23:59:59.000Z

135

Joint probabilities and quantum cognition  

E-Print Network (OSTI)

In this paper we discuss the existence of joint probability distributions for quantum-like response computations in the brain. We do so by focusing on a contextual neural-oscillator model shown to reproduce the main features of behavioral stimulus-response theory. We then exhibit a simple example of contextual random variables not having a joint probability distribution, and describe how such variables can be obtained from neural oscillators, but not from a quantum observable algebra.

J. Acacio de Barros

2012-06-26T23:59:59.000Z

136

Joint probabilities and quantum cognition  

SciTech Connect

In this paper we discuss the existence of joint probability distributions for quantumlike response computations in the brain. We do so by focusing on a contextual neural-oscillator model shown to reproduce the main features of behavioral stimulus-response theory. We then exhibit a simple example of contextual random variables not having a joint probability distribution, and describe how such variables can be obtained from neural oscillators, but not from a quantum observable algebra.

Acacio de Barros, J. [Liberal Studies, 1600 Holloway Ave., San Francisco State University, San Francisco, CA 94132 (United States)

2012-12-18T23:59:59.000Z

137

DOE, BOEMRE and NOAA Announce Nearly $5 Million for Joint Environmental  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

DOE, BOEMRE and NOAA Announce Nearly $5 Million for Joint DOE, BOEMRE and NOAA Announce Nearly $5 Million for Joint Environmental Research Projects to Advance Ocean Renewable Energy DOE, BOEMRE and NOAA Announce Nearly $5 Million for Joint Environmental Research Projects to Advance Ocean Renewable Energy October 26, 2010 - 12:00am Addthis WASHINGTON, DC - The Department of Energy (DOE), Bureau of Ocean Energy Management, Regulation and Enforcement (BOEMRE), and the Department of Commerce's National Oceanic and Atmospheric Administration (NOAA) today announced eight joint research awards totaling nearly $5 million to support the responsible siting and permitting of offshore wind energy facilities and ocean energy generated from waves, tides, currents and thermal gradients. This critical research will address key information gaps

138

DOE, BOEMRE and NOAA Announce Nearly $5 Million for Joint Environmental  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

DOE, BOEMRE and NOAA Announce Nearly $5 Million for Joint DOE, BOEMRE and NOAA Announce Nearly $5 Million for Joint Environmental Research Projects to Advance Ocean Renewable Energy DOE, BOEMRE and NOAA Announce Nearly $5 Million for Joint Environmental Research Projects to Advance Ocean Renewable Energy October 26, 2010 - 12:00am Addthis WASHINGTON, DC - The Department of Energy (DOE), Bureau of Ocean Energy Management, Regulation and Enforcement (BOEMRE), and the Department of Commerce's National Oceanic and Atmospheric Administration (NOAA) today announced eight joint research awards totaling nearly $5 million to support the responsible siting and permitting of offshore wind energy facilities and ocean energy generated from waves, tides, currents and thermal gradients. This critical research will address key information gaps

139

Advanced Ceramics  

Science Conference Proceedings (OSTI)

Table 2   Classification of advanced ceramics...solid electrolytes, piezoelectrics, dielectrics, superconductors Optical Low absorption coefficient Lamps, windows, fiber optics, infrared optics Nuclear Irradiation resistance, high absorption coefficient,

140

Advanced Manufacturing Office: Solicitations  

NLE Websites -- All DOE Office Websites (Extended Search)

Solicitations on Twitter Bookmark Advanced Manufacturing Office: Solicitations on Google Bookmark Advanced Manufacturing Office: Solicitations on Delicious Rank Advanced...

Note: This page contains sample records for the topic "advanced joint inversion" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Advanced Manufacturing Office: Webcasts  

NLE Websites -- All DOE Office Websites (Extended Search)

Office: Webcasts on Twitter Bookmark Advanced Manufacturing Office: Webcasts on Google Bookmark Advanced Manufacturing Office: Webcasts on Delicious Rank Advanced...

142

Advanced Manufacturing Office: Subscribe  

NLE Websites -- All DOE Office Websites (Extended Search)

Office: Subscribe on Twitter Bookmark Advanced Manufacturing Office: Subscribe on Google Bookmark Advanced Manufacturing Office: Subscribe on Delicious Rank Advanced...

143

Advanced Manufacturing Office: Workshops  

NLE Websites -- All DOE Office Websites (Extended Search)

Office: Workshops on Twitter Bookmark Advanced Manufacturing Office: Workshops on Google Bookmark Advanced Manufacturing Office: Workshops on Delicious Rank Advanced...

144

DOE Announces Funding for U.S.-India Joint Clean Energy Research and  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Funding for U.S.-India Joint Clean Energy Research Funding for U.S.-India Joint Clean Energy Research and Development Center DOE Announces Funding for U.S.-India Joint Clean Energy Research and Development Center May 16, 2011 - 12:00am Addthis Washington, D.C. - As part of the Partnership to Advance Clean Energy announced by President Obama and Prime Minister Singh of India last November, the Department of Energy has committed $25 million over the next five years to support the U.S.-India Joint Clean Energy Research and Development Center (JCERDC). This first-of-a-kind effort is a key component of the U.S. and India's commitment to improve energy access and promote low-carbon growth by facilitating joint research and development of clean energy technologies. Teams of scientists and engineers from the U.S. and India will initially

145

APPOINTMENT OF A JOINT MEMBER New Appointment  

E-Print Network (OSTI)

APPOINTMENT OF A JOINT MEMBER Renewal: New Appointment: "A joint appointment reflects the active with an academic appointment in one academic unit may be given a joint appointment in another academic unit. ..." [Article 13.10.1] In the case of a new hire, where the intention is a Joint Appointment, there needs

Saskatchewan, University of

146

Work-efficient matrix inversion in polylogarithmic time  

Science Conference Proceedings (OSTI)

We present an algorithm for matrix inversion that combines the practical requirement of an optimal number of arithmetic operations and the theoretical goal of a polylogarithmic critical path length. The algorithm reduces inversion to matrix multiplication. ... Keywords: linear algebra, matrix inversion, newton approximation, numerics, parallel algorithms, polylogarithmic time, strassen's inversion algorithm

Peter Sanders, Jochen Speck, Raoul Steffen

2013-07-01T23:59:59.000Z

147

Understanding, Modeling and Predicting Hidden Solder Joint Shape Using Active Thermography  

E-Print Network (OSTI)

Characterizing hidden solder joint shapes is essential for electronics reliability. Active thermography is a methodology to identify hidden defects inside an object by means of surface abnormal thermal response after applying a heat flux. This research focused on understanding, modeling, and predicting hidden solder joint shapes. An experimental model based on active thermography was used to understand how the solder joint shapes affect the surface thermal response (grand average cooling rate or GACR) of electronic multi cover PCB assemblies. Next, a numerical model simulated the active thermography technique, investigated technique limitations and extended technique applicability to characterize hidden solder joint shapes. Finally, a prediction model determined the optimum active thermography conditions to achieve an adequate hidden solder joint shape characterization. The experimental model determined that solder joint shape plays a higher role for visible than for hidden solder joints in the GACR; however, a MANOVA analysis proved that hidden solder joint shapes are significantly different when describe by the GACR. An artificial neural networks classifier proved that the distances between experimental solder joint shapes GACR must be larger than 0.12 to achieve 85% of accuracy classifying. The numerical model achieved minimum agreements of 95.27% and 86.64%, with the experimental temperatures and GACRs at the center of the PCB assembly top cover, respectively. The parametric analysis proved that solder joint shape discriminability is directly proportional to heat flux, but inversely proportional to covers number and heating time. In addition, the parametric analysis determined that active thermography is limited to five covers to discriminate among hidden solder joint shapes. A prediction model was developed based on the parametric numerical data to determine the appropriate amount of energy to discriminate among solder joint shapes for up to five covers. The degree of agreement between the prediction model and the experimental model was determined to be within a 90.6% for one and two covers. The prediction model is limited to only three solder joints, but these research principles can be applied to generate more realistic prediction models for large scale electronic assemblies like ball grid array assemblies having as much as 600 solder joints.

Giron Palomares, Jose

2012-05-01T23:59:59.000Z

148

A feasibility study for experimentally determining dynamic force distribution in a lap joint.  

SciTech Connect

Developing constitutive models of the physics in mechanical joints is currently stymied by inability to measure forces and displacements within the joint. The current state of the art estimates whole joint stiffness and energy loss per cycle from external measured force input and one or two acceleration responses. To validate constitutive models beyond this state requires a measurement of the distributed forces and displacements at the joint interface. Unfortunately, introducing measurement devices at the interface completely disrupts the desired physics. A feasibility study is presented for a non-intrusive method of solving for the interface dynamic forces from an inverse problem using full field measured responses. The responses come from the viewable surface of a beam. The noise levels associated with digital image correlation and continuous scanning laser Doppler velocimetry are evaluated from typical beam experiments. Two inverse problems are simulated. One utilizes the extended Sum of Weighted Accelerations Technique (SWAT). The second is a new approach dubbed the method of truncated orthogonal forces. These methods are much more robust if the contact patch geometry is well identified. Various approaches to identifying the contact patch are investigated, including ion marker tracking, Prussian blue and ultrasonic measurements. A typical experiment is conceived for a beam which has a lap joint at one end with a single bolt connecting it to another identical beam. In a virtual test using the beam finite element analysis, it appears that the SWAT inverse method requires evaluation of too many coefficients to adequately identify the force distribution to be viable. However, the method of truncated orthogonal forces appears viable with current digital image correlation (and probably other) imaging techniques.

Mayes, Randall Lee

2013-11-01T23:59:59.000Z

149

Advanced Systems  

NLE Websites -- All DOE Office Websites (Extended Search)

Advanced Systems: Advanced Systems: high Performance fenestration systems Research areas: Research activities to improve the performance of windows and other fenestration products must address window systems issues as well as Glazing Materials research. LBNL activities in the area of Advanced Systems include research at both the product level and the building envelope and building systems levels. Highly insulating windows - using non structural center layers Lower cost solutions to more insulating three layer glazing systems, with the potential to turn windows in U.S. heating dominated residential applications into net-energy gainers. Highly Insulating Window Frames In collaboration with the Norwegian University of Science and Technology, we are researching the potentials for highly insulating window frames. Our initial work examines European frames with reported U-factors under 0.15 Btu/hr-ft2-F. Future research aims to analyze these designs, verify these performance levels and ensure that procedures used to calculate frame performance are accurate.

150

"Sousveillance": inverse surveillance in multimedia imaging  

Science Conference Proceedings (OSTI)

This is a personal narrative that began 30 years ago as a childhood hobby, of wearing and implanting various sensors, effectors, and multimedia computation in order to re-define personal space and modify sensory perception computationally. This work ... Keywords: computer mediated reality, cyborglog, equiveillance, eyetap, inverse surveillance, sousveillance, surveillance, weblog

Steve Mann

2004-10-01T23:59:59.000Z

151

Designing Optimal Spectral Filters for Inverse Problems  

Science Conference Proceedings (OSTI)

Spectral filtering suppresses the amplification of errors when computing solutions to ill-posed inverse problems; however, selecting good regularization parameters is often expensive. In many applications, data are available from calibration experiments. ... Keywords: Bayes risk, Bayesian risk, Tikhonov, Wiener filter, empirical risk, filtering, ill-posed problem, image deblurring, machine learning, optimal design, optimal filtering, regularization, singular value decomposition, stochastic programming

Julianne Chung; Matthias Chung; Dianne P. O'Leary

2011-11-01T23:59:59.000Z

152

Arctic Inversion Strength in Climate Models  

Science Conference Proceedings (OSTI)

Recent work indicates that climate models have a positive bias in the strength of the wintertime low-level temperature inversion over the high-latitude Northern Hemisphere. It has been argued this bias leads to underestimates of the Arctic’s ...

Brian Medeiros; Clara Deser; Robert A. Tomas; Jennifer E. Kay

2011-09-01T23:59:59.000Z

153

A search for inverse fission of uranium  

SciTech Connect

There is a long-term interest in running the fission reaction backward, i.e., studying the 'inverse fission' of uranium. The recent availability of beams of n-rich fission fragments has stimulated interest in this endeavor. The purpose is to search for inverse fission in the reactions {sup 124,132}Sn + {sup 100}Mo. In the {sup 124}Sn + {sup 100}Mo reaction, evaporation residues were searched for using in-beam detection of evaporation residues, in-beam {alpha} spectroscopy, and post-irradiation {alpha} spectroscopy, while in the {sup 132}Sn + {sup 100}Mo reaction, the evaporation residue {sup 230}U was searched for using post-irradiation {alpha} spectroscopy. No evidence for the occurrence of the inverse fission reactions was found. The upper-limit cross section for the latter reaction is {approx}550 {mu}b, while the experimental upper-limit cross section for the former reaction is about 21{sup -21}{sup +38} nb. The intensity of suitable radioactive beams is not high enough at present to detect inverse fission. For the {sup 124}Sn + {sup 100}Mo reaction, the observed upper limits are below the estimates of current models for these reactions, probably due to fusion hindrance.

Yanez, R [Oregon State University, Corvallis; Loveland, Walter [Oregon State University; Beckerman, J. [Oregon State University, Corvallis; Leonard, M. [Oregon State University, Corvallis; Pettersson, G. [Oregon State University, Corvallis; Gross, Carl J [ORNL; Shapira, Dan [ORNL; Liang, J Felix [ORNL; Kohley, Zachary W [ORNL; Varner Jr, Robert L [ORNL

2012-01-01T23:59:59.000Z

154

Inverse Problems in Classical and Quantum Physics  

E-Print Network (OSTI)

The subject of this thesis is in the area of Applied Mathematics known as Inverse Problems. Inverse problems are those where a set of measured data is analysed in order to get as much information as possible on a model which is assumed to represent a system in the real world. We study two inverse problems in the fields of classical and quantum physics: QCD condensates from tau-decay data and the inverse conductivity problem. We use a functional method which allows us to extract within rather general assumptions phenomenological parameters of QCD (the condensates) from a comparison of the time-like experimental data with asymptotic space-like results from theory. The price to be paid for the generality of assumptions is relatively large errors in the values of the extracted parameters. Although we do not claim that our method is superior to other approaches, we hope that our results lend additional confidence to the numerical results obtained with the help of methods based on QCD sum rules. In this thesis, als...

Almasy, Andrea A

2009-01-01T23:59:59.000Z

155

Joint Staff, and J-Directorate Directives”  

E-Print Network (OSTI)

1. Purpose a. To provide the process and procedures for handling the transition and reconciliation of USJFCOM issuances into CJCS/Joint Staff directives in accordance with (IAW) references a and b. b. For the purpose of this notice, the word “issuances ” refers to USJFCOM policy documents, and the word “directives ” refers to Joint Staff policy documents. 2. Cancellation. None. 3. Applicability. This notice applies to all Joint Staff personnel and to all U.S. Joint Forces Command (USJFCOM) directorates, organizations, or other subordinate activities transitioning to the Joint Staff. It does not apply to USJFCOM entities transitioning to organizations outside the Joint Staff.

Dom/sjs Cjcs Notice

2011-01-01T23:59:59.000Z

156

Inverse Problems in Classical and Quantum Physics  

E-Print Network (OSTI)

The subject of this thesis is in the area of Applied Mathematics known as Inverse Problems. Inverse problems are those where a set of measured data is analysed in order to get as much information as possible on a model which is assumed to represent a system in the real world. We study two inverse problems in the fields of classical and quantum physics: QCD condensates from tau-decay data and the inverse conductivity problem. We use a functional method which allows us to extract within rather general assumptions phenomenological parameters of QCD (the condensates) from a comparison of the time-like experimental data with asymptotic space-like results from theory. The price to be paid for the generality of assumptions is relatively large errors in the values of the extracted parameters. Although we do not claim that our method is superior to other approaches, we hope that our results lend additional confidence to the numerical results obtained with the help of methods based on QCD sum rules. In this thesis, also two approaches of EIT image reconstruction are proposed. The first is based on reformulating the inverse problem in terms of integral equations. This method uses only a single set of measurements for the reconstruction. The second approach is an algorithm based on linearisation which uses more then one set of measurements. A promising result is that one can qualitatively reconstruct the conductivity inside the cross-section of a human chest. Even though the human volunteer is neither two-dimensional nor circular, such reconstructions can be useful in medical applications: monitoring for lung problems such as accumulating fluid or a collapsed lung and noninvasive monitoring of heart function and blood flow.

Andrea A. Almasy

2009-12-02T23:59:59.000Z

157

Jointly Sponsored Research Program Energy Related Research  

DOE Green Energy (OSTI)

Cooperative Agreement, DE-FC26-98FT40323, Jointly Sponsored Research (JSR) Program at Western Research Institute (WRI) began in 1998. Over the course of the Program, a total of seventy-seven tasks were proposed utilizing a total of $23,202,579 in USDOE funds. Against this funding, cosponsors committed $26,557,649 in private funds to produce a program valued at $49,760,228. The goal of the Jointly Sponsored Research Program was to develop or assist in the development of innovative technology solutions that will: (1) Increase the production of United States energy resources - coal, natural gas, oil, and renewable energy resources; (2) Enhance the competitiveness of United States energy technologies in international markets and assist in technology transfer; (3) Reduce the nation's dependence on foreign energy supplies and strengthen both the United States and regional economies; and (4) Minimize environmental impacts of energy production and utilization. Under the JSR Program, energy-related tasks emphasized enhanced oil recovery, heavy oil upgrading and characterization, coal beneficiation and upgrading, coal combustion systems development including oxy-combustion, emissions monitoring and abatement, coal gasification technologies including gas clean-up and conditioning, hydrogen and liquid fuels production, coal-bed methane recovery, and the development of technologies for the utilization of renewable energy resources. Environmental-related activities emphasized cleaning contaminated soils and waters, processing of oily wastes, mitigating acid mine drainage, and demonstrating uses for solid waste from clean coal technologies, and other advanced coal-based systems. Technology enhancement activities included resource characterization studies, development of improved methods, monitors and sensors. In general the goals of the tasks proposed were to enhance competitiveness of U.S. technology, increase production of domestic resources, and reduce environmental impacts associated with energy production and utilization. This report summarizes the accomplishments of the JSR Program.

Western Research Institute

2009-03-31T23:59:59.000Z

158

Importance of Elevation and Temperature Inversions for the Interpretation  

Open Energy Info (EERE)

Importance of Elevation and Temperature Inversions for the Interpretation Importance of Elevation and Temperature Inversions for the Interpretation of Thermal Infrared Satellite Images Used in Geothermal Exploration Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Conference Proceedings: Importance of Elevation and Temperature Inversions for the Interpretation of Thermal Infrared Satellite Images Used in Geothermal Exploration Details Activities (1) Areas (1) Regions (0) Abstract: Examples of nighttime temperature inversions are shown in thermal infrared satellite images collected over the Coso geothermal field in eastern California. Temperature-elevation plots show the normal trend of temperature decrease with elevation, on which temperature inversions appear superimposed as opposite trends. Such inversions are common and they should

159

State Technologies Advancement Collaborative  

DOE Green Energy (OSTI)

The U. S. Department of Energy (DOE), National Association of State Energy Officials (NASEO), and Association of State Energy Research and Technology Transfer Institutions (ASERTTI) signed an intergovernmental agreement on November 14, 2002, that allowed states and territories and the Federal Government to better collaborate on energy research, development, demonstration and deployment (RDD&D) projects. The agreement established the State Technologies Advancement Collaborative (STAC) which allowed the states and DOE to move RDD&D forward using an innovative competitive project selection and funding process. A cooperative agreement between DOE and NASEO served as the contracting instrument for this innovative federal-state partnership obligating funds from DOE's Office of Energy Efficiency and Renewable Energy and Office of Fossil Energy to plan, fund, and implement RDD&D projects that were consistent with the common priorities of the states and DOE. DOE's Golden Field Office provided Federal oversight and guidance for the STAC cooperative agreement. The STAC program was built on the foundation of prior Federal-State efforts to collaborate on and engage in joint planning for RDD&D. Although STAC builds on existing, successful programs, it is important to note that it was not intended to replace other successful joint DOE/State initiatives such as the State Energy Program or EERE Special Projects. Overall the STAC process was used to fund, through three competitive solicitations, 35 successful multi-state research, development, deployment, and demonstration projects with an overall average non-federal cost share of 43%. Twenty-two states were awarded at least one prime contract, and organizations in all 50 states and some territories were involved as subcontractors in at least one STAC project. Projects were funded in seven program areas: (1) Building Technologies, (2) Industrial Technologies, (3) Transportation Technologies, (4) Distributed Energy Resources, (5) Hydrogen Technology Learning Centers, (6) Fossil Energy, and (7) Rebuild America.

David S. Terry

2012-01-30T23:59:59.000Z

160

Technical status of the Dish/Stirling Joint Venture Program  

DOE Green Energy (OSTI)

Initiated in 1991; the Dish/Stirling Joint Venture Program (DSJVP) is a 5-year, $17.2 million joint venture which is funded by Cummins Power Generation, Inc. (CPG) of Columbus, Indiana and the United States Department of Energy`s (DOE) Solar Thermal and Biomass Power Division. Sandia National Laboratories administers and provides technical management for this contract on the DOE`s behalf. In January, 1995; CPG advanced to Phase 3 of this three-phase contract. The objective of the DSJVP is to develop and commercialize a 7-kW. Dish/Stirling System for remote power markets by 1997. In this paper, the technical status of the major subsystems which comprise the CPG 7-kW{sub e} Dish/Stirling System is presented. These subsystems include the solar concentrator, heat pipe receiver, engine/alternator, power conditioning, and automatic controls.

Bean, J.R. [Cummins Power Generation, Inc., Columbus, IN (United States); Diver, R.B. [Sandia National Labs., Albuquerque, NM (United States)

1995-06-01T23:59:59.000Z

Note: This page contains sample records for the topic "advanced joint inversion" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Advanced Combustion  

NLE Websites -- All DOE Office Websites (Extended Search)

Systems Systems Advanced Combustion Background Conventional coal-fired power plants utilize steam turbines to generate electricity, which operate at efficiencies of 35-37 percent. Operation at higher temperatures and pressures can lead to higher efficiencies, resulting in reduced fuel consumption and lower greenhouse gas emissions. Higher efficiency also reduces CO2 production for the same amount of energy produced, thereby facilitating a reduction in greenhouse gas emissions. When combined, oxy-combustion comes with an efficiency hit, so it will actually increase the amount of CO2 to be captured. But without so much N2 in the flue gas, it will be easier and perhaps more efficient to capture, utilize and sequester. NETL's Advanced Combustion Project and members of the NETL-Regional University

162

Advanced Search  

NLE Websites -- All DOE Office Websites (Extended Search)

Publications Publications Advanced Search Most publications by Environmental Energy Technologies Division authors are searchable from this page, including peer-reviewed publications, book chapters, conference proceedings and LBNL reports. Filter Advanced Search Publications list This publications database is an ongoing project, and not all Division publications are represented here yet. For additional help see the bottom of this page. Documents Found: 4418 Title Keyword LBNL Number Author - Any - Abadie, Marc O Abbey, Chad Abdolrazaghi, Mohamad Aberg, Annika Abhyankar, Nikit Abraham, Marvin M Abshire, James B Abushakra, Bass Acevedo-Ruiz, Manuel Aceves, Salvador Ache, Hans J Ackerly, David D Ackerman, Andrew S Adamkiewicz, Gary Adams, J W Adams, Carl Adamson, Bo Addy, Nathan Addy, Susan E Aden, Nathaniel T Adesola, Bunmi Adhikari,

163

United States and France Sign Joint Statement on Civil Liability...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

United States and France Sign Joint Statement on Civil Liability for Nuclear Damage United States and France Sign Joint Statement on Civil Liability for Nuclear Damage Joint...

164

Joint Environmental Management System (EMS) | Department of Energy  

NLE Websites -- All DOE Office Websites (Extended Search)

Joint Environmental Management System (EMS) Joint Environmental Management System (EMS) Joint Environmental Management System (EMS) The environmental management system (EMS) has...

165

Scanned_Joint_Declaration_(Italian).pdf | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

JointDeclaration(Italian).pdf ScannedJointDeclaration(Italian).pdf ScannedJointDeclaration(Italian).pdf More Documents & Publications FTCP Face to Face Meeting - March 30,...

166

International Power Girasolar joint company | Open Energy Information  

Open Energy Info (EERE)

Girasolar joint company Jump to: navigation, search Name International Power Girasolar joint company Sector Solar Product Joint venture announced between US IPWG and...

167

Joint Outreach Task Group Former Workers Screening Program |...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Joint Outreach Task Group Former Workers Screening Program Joint Outreach Task Group Former Workers Screening Program The Joint Outreach Task Group (JOTG) includes representatives...

168

2010_Nuclear_Security_Joint_Statement.pdf | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

NuclearSecurityJointStatement.pdf 2010NuclearSecurityJointStatement.pdf 2010NuclearSecurityJointStatement.pdf More Documents & Publications United States and France...

169

Advanced Combustion  

Science Conference Proceedings (OSTI)

The activity reported in this presentation is to provide the mechanical and physical property information needed to allow rational design, development and/or choice of alloys, manufacturing approaches, and environmental exposure and component life models to enable oxy-fuel combustion boilers to operate at Ultra-Supercritical (up to 650{degrees}C & between 22-30 MPa) and/or Advanced Ultra-Supercritical conditions (760{degrees}C & 35 MPa).

Holcomb, Gordon R. [NETL

2013-03-11T23:59:59.000Z

170

Data Management Group Joint Program in Transportation  

E-Print Network (OSTI)

Data Management Group Joint Program in Transportation University of Toronto System Access Request will the University of Toronto, the Joint Program in Transportation Data Management Group or any of its funding

Toronto, University of

171

Optimization Online - Distributionally Robust Joint Chance ...  

E-Print Network (OSTI)

Aug 12, 2010 ... Abstract: We develop tractable semidefinite programming (SDP) based approximations for distributionally robust individual and joint chance ...

172

Alternative Transmission Technologies for Joint Planning Studies  

Science Conference Proceedings (OSTI)

This report describes a detailed analysis of joint transmission planning needs and capabilities, including an assessment of current research in the area. The report has value as a starting point and reference for transmission planners engaged in joint planning exercises because it focuses on technologies that could facilitate joint transmission planning of a bulk power grid. A joint planning exercise involves the collaboration of multiple transmission planning groups that may each have ...

2013-12-09T23:59:59.000Z

173

TMS/ASM Joint Distinguished Lectureship Award  

Science Conference Proceedings (OSTI)

Professional Honors and Awards Recipients of the TMS/ASM Joint Distinguished Lectureship Award. 2011, Subra Suresh. 2010, Mildred Dresselhaus.

174

Optical inverse-square displacement sensor  

DOE Patents (OSTI)

This invention comprises an optical displacement sensor that uses the inverse-square attenuation of light reflected from a diffused surface to calculate the distance from the sensor to the reflecting surface. Light emerging from an optical fiber or the like is directed onto the surface whose distance is to be measured. The intensity I of reflected light is angle dependent, but within a sufficiently small solid angle it falls off as the inverse square of the distance from the surface. At least a pair of optical detectors are mounted to detect the reflected light within the small solid angle, their ends being at different distances R and R + [Delta]R from the surface. The distance R can then be found in terms of the ratio of the intensity measurements and the separation length as given in an equation. 10 figs.

Howe, R.D.; Kychakoff, G.

1989-09-12T23:59:59.000Z

175

Optical inverse-square displacement sensor  

DOE Patents (OSTI)

This invention comprises an optical displacement sensor that uses the inverse-square attenuation of light reflected from a diffused surface to calculate the distance from the sensor to the reflecting surface. Light emerging from an optical fiber or the like is directed onto the surface whose distance is to be measured. The intensity I of reflected light is angle dependent, but within a sufficiently small solid angle it falls off as the inverse square of the distance from the surface. At least a pair of optical detectors are mounted to detect the reflected light within the small solid angle, their ends being at different distances R and R+.DELTA.R from the surface. The distance R can then be found in terms of the ratio of the intensity measurements and the separation length as ##EQU1##

Howe, Robert D. (San Mateo County, CA); Kychakoff, George (King County, WA)

1989-01-01T23:59:59.000Z

176

University of Toronto Joint Program in Transportation  

E-Print Network (OSTI)

University of Toronto Joint Program in Transportation Data Management Group GTA A.M. PEAK HOUR ­ Notation page i University of Toronto Joint Program in Transportation Data Management Group Preface the joint efforts of transportation planning staff of the Regional Municipalities of York, Peel, Durham

Toronto, University of

177

Joint News Release ELEVENTH ITER NEGOTIATIONS MEETING  

E-Print Network (OSTI)

Joint News Release ELEVENTH ITER NEGOTIATIONS MEETING CHENGDU , CHINA, 24OCTOBER 2005 Delegations of America met in CHENGDU on 24October 2005 to continue their work to reach agreement on the joint the project and its procurements, and the continuing joint drafting of the agreement on establishing

178

JOINT PROGRAM IN TRANSPORTATION UNIVERSITY OF TORONTO  

E-Print Network (OSTI)

JOINT PROGRAM IN TRANSPORTATION UNIVERSITY OF TORONTO 2001 TRANSPORTATION TOMORROW SURVEY not to participate) #12;JOINT PROGRAM IN TRANSPORTATION UNIVERSITY OF TORONTO 2001 TRANSPORTATION TOMORROW SURVEY Survey Area 2001 only 1996 only 1996 and 2001 1986, 1991, 1996 and 2001 #12;JOINT PROGRAM

Toronto, University of

179

Evaluation of Medium-Voltage Cable Joints  

Science Conference Proceedings (OSTI)

This research is a continuation of work evaluating performance of state-of-the-art joints. Three single-phase cold shrink joints and three "I"-type premolded separable connector joints were evaluated. Two of the separable connectors were rated 600 A and one was rated 900 A; both were installed on ethylene propylene rubber (EPR) 15-kV cables.

2006-09-27T23:59:59.000Z

180

High-Inversion Fog Episodes in Central California  

Science Conference Proceedings (OSTI)

The meteorological conditions associated with the high-inversion fog episode on 23–28 December 1978 near Chico, California, are described. In general, the meteorological conditions throughout the fog and inversion layers were characterized by ...

Stephen Holets; Robert N. Swanson

1981-08-01T23:59:59.000Z

Note: This page contains sample records for the topic "advanced joint inversion" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Waves on a Marine Inversion Undergoing Mountain Leeside Wind Shear  

Science Conference Proceedings (OSTI)

Inland penetration of a shallow layer of marine air is a common occurrence along the coast of southern California. The marine air generally is confined to the coastal basin by surrounding mountains and a capping inversion. Air above the inversion ...

William T. Sommers

1981-06-01T23:59:59.000Z

182

Error Budget of Inverse Box Models: The North Atlantic  

Science Conference Proceedings (OSTI)

Linear inverse box models based on hydrographic data are widely used to estimate the ocean circulation and associated transports of heat and of other important quantities. The inverse method permits calculation of a circulation that is consistent ...

Alexandre Ganachaud

2003-11-01T23:59:59.000Z

183

Antarctic Low-Tropospheric Humidity Inversions: 10-Yr Climatology  

Science Conference Proceedings (OSTI)

Humidity inversions are nearly permanently present in the coastal Antarctic atmosphere. This is shown based on an investigation of statistical characteristics of humidity inversions at 11 Antarctic coastal stations using radiosonde data from the ...

Tiina Nygård; Teresa Valkonen; Timo Vihma

2013-07-01T23:59:59.000Z

184

Wrist-Partitioned Inverse Kinematic Accelerations and Manipulator Dynamics  

E-Print Network (OSTI)

An efficient algorithm is presented for the calculation of the inverse kinematic accelerations for a 6 degree-of-freedom manipulator with a spherical wrist. The inverse kinematic calculation is shown to work synergistically ...

Hollerbach, John M.

1983-04-01T23:59:59.000Z

185

Joint interaction with embedded concretions: joint loading congurations inferred from propagation paths  

E-Print Network (OSTI)

Joint interaction with embedded concretions: joint loading con®gurations inferred from propagation The interaction between propagating joints and embedded concretions in a Devonian black shale near Seneca Lake, NY, permits identi®cation of the loading con®gurations responsible for two joint sets of dierent ages striking

Engelder, Terry

186

Computationally efficient Bayesian inference for inverse problems.  

SciTech Connect

Bayesian statistics provides a foundation for inference from noisy and incomplete data, a natural mechanism for regularization in the form of prior information, and a quantitative assessment of uncertainty in the inferred results. Inverse problems - representing indirect estimation of model parameters, inputs, or structural components - can be fruitfully cast in this framework. Complex and computationally intensive forward models arising in physical applications, however, can render a Bayesian approach prohibitive. This difficulty is compounded by high-dimensional model spaces, as when the unknown is a spatiotemporal field. We present new algorithmic developments for Bayesian inference in this context, showing strong connections with the forward propagation of uncertainty. In particular, we introduce a stochastic spectral formulation that dramatically accelerates the Bayesian solution of inverse problems via rapid evaluation of a surrogate posterior. We also explore dimensionality reduction for the inference of spatiotemporal fields, using truncated spectral representations of Gaussian process priors. These new approaches are demonstrated on scalar transport problems arising in contaminant source inversion and in the inference of inhomogeneous material or transport properties. We also present a Bayesian framework for parameter estimation in stochastic models, where intrinsic stochasticity may be intermingled with observational noise. Evaluation of a likelihood function may not be analytically tractable in these cases, and thus several alternative Markov chain Monte Carlo (MCMC) schemes, operating on the product space of the observations and the parameters, are introduced.

Marzouk, Youssef M.; Najm, Habib N.; Rahn, Larry A.

2007-10-01T23:59:59.000Z

187

Advanced Energy Storage Publications  

NLE Websites -- All DOE Office Websites (Extended Search)

Advanced Energy Storage Publications Reports: Advanced Technology Development Program For Lithium-Ion Batteries: Gen 2 Performance Evaluation Final Report Advanced Technology...

188

Advanced Manufacturing Office: News  

NLE Websites -- All DOE Office Websites (Extended Search)

Manufacturing Office: News on Twitter Bookmark Advanced Manufacturing Office: News on Google Bookmark Advanced Manufacturing Office: News on Delicious Rank Advanced Manufacturing...

189

From Hot Towers to TRMM: Joanne Simpson and Advances in Tropical Convection Research  

Science Conference Proceedings (OSTI)

Joanne Simpson began contributing to advances in tropical convection about half a century ago. The hot tower hypothesis jointly put forth by Joanne Simpson and Herbert Riehl postulated that deep convective clouds populating the “equatorial trough ...

Robert A. Houze Jr.

2003-01-01T23:59:59.000Z

190

Modeling Direct and Inverse Problems in Ferritic Heat-Exchanger ...  

Science Conference Proceedings (OSTI)

Symposium, Data Analytics for Materials Science and Manufacturing. Presentation Title, Modeling Direct and Inverse Problems in Ferritic Heat- Exchanger Tubes.

191

Mission Advancing  

NLE Websites -- All DOE Office Websites (Extended Search)

NETL Accomplishments NETL Accomplishments - the lab 2 Mission Advancing energy options to fuel our economy, strengthen our security, and improve our environment. Renewed Prosperity Through Technological Innovation - Letter from the Director NETL: the ENERGY lab 4 6 3 Contents Technology Transfer Patents and Commercialization Sharing Our Expertise Noteworthy Publications 60 62 63 64 66 Environment, Economy, & Supply Carbon Capture and Storage Partnerships Work to Reduce Atmospheric CO 2 Demand-Side Efficiencies New NETL Facility Showcases Green Technologies Environment & Economy Materials Mercury Membranes NETL Education Program Produces Significant Achievement Monitoring Water Economy & Supply NETL's Natural Gas Prediction Tool Aids Hurricane Recovery Energy Infrastructure

192

Advanced Research  

NLE Websites -- All DOE Office Websites (Extended Search)

Ductility EnhancEmEnt of molybDEnum Ductility EnhancEmEnt of molybDEnum PhasE by nano-sizED oxiDE DisPErsions Description Using computational modeling techniques, this research aims to develop predictive capabilities to facilitate the design and optimization of molybdenum (Mo), chromium (Cr), and other high-temperature structural materials to enable these materials to withstand the harsh environments of advanced power generation systems, such as gasification-based systems. These types of materials are essential to the development of highly efficient, clean energy technologies such as low-emission power systems that use coal or other fossil fuels.

193

Metal-ceramic joint assembly  

DOE Patents (OSTI)

A metal-ceramic joint assembly in which a brazing alloy is situated between metallic and ceramic members. The metallic member is either an aluminum-containing stainless steel, a high chromium-content ferritic stainless steel or an iron nickel alloy with a corrosion protection coating. The brazing alloy, in turn, is either an Au-based or Ni-based alloy with a brazing temperature in the range of 9500 to 1200.degree. C.

Li, Jian (New Milford, CT)

2002-01-01T23:59:59.000Z

194

Hydraulic fracturing of jointed formations  

DOE Green Energy (OSTI)

Measured by volume, North America's largest hydraulic fracturing operations have been conducted at Fenton Hill, New Mexico to create geothermal energy reservoirs. In the largest operation 21,000 m/sup 3/ of water were injected into jointed granitic rock at a depth of 3.5 km. Microearthquakes induced by this injection were measured with geophones placed in five wells drilled into, or very close, to the reservoir, as well as 11 surface seismometers. The large volume of rock over which the microearthquakes were distributed indicates a mechanism of hydraulic stimulation which is at odds with conventional fracturing theory, which predicts failure along a plane which is perpendicular to the least compressive earth stress. A coupled rock mechanics/fluid flow model provides much of the explanation. Shear slippage along pre-existing joints in the rock is more easily induced than conventional tensile failure, particularly when the difference between minimum and maximum earth stresses is large and the joints are oriented at angles between 30 and 60 degrees to the principal earth stresses, and a low viscosity fluid like water is injected. Shear slippage results in local redistribution of stresses, which allows a branching, or dendritic, stimulation pattern to evolve, in agreement with the patterns of microearthquake locations. These results are qualitatively similar to the controversial process known as ''Kiel'' fracturing, in which sequential injections and shut-ins are repeated to create dendritic fractures for enhanced oil and gas recovery. However, we believe that the explanation is shear slippage of pre-existing joints and stress redistribution, not proppant bridging and fluid blocking as suggested by Kiel. 15 refs., 10 figs.

Murphy, H.D.; Fehler, M.C.

1986-01-01T23:59:59.000Z

195

Jointly Sponsored Research Program. Final report  

SciTech Connect

The Jointly Sponsored Research Program (JSRP) is a US Department of Energy (DOE) program funded through the Office of Fossil Energy and administered at the Morgantown Energy Technology Center. Under this program, which has been in place since Fiscal Year 1990, DOE makes approximately $2.5 million available each year to the Energy and Environmental Research Center (EERC) to fund projects that are of current interest to industry but which still involve significant risk, thus requiring some government contribution to offset the risk if the research is to move forward. The program guidelines require that at least 50% of the project funds originate from nonfederal sources. Projects funded under the JSRP often originate under a complementary base program, which funds higher-risk projects. The projects funded in Fiscal Year 1996 addressed a wide range of Fossil Energy interests, including hot-gas filters for advanced power systems; development of cleaner, more efficient processing technologies; development of environmental control technologies; development of environmental remediation and reuse technologies; development of improved analytical techniques; and development of a beneficiation technique to broaden the use of high-sulfur coal. Descriptions and status for each of the projects funded during the past fiscal year are included in Section A of this document, Statement of Technical Progress.

NONE

1997-07-01T23:59:59.000Z

196

Joint Environmental Management System (EMS) Declaration of Conformance...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Services Environmental Management System Joint Environmental Management System (EMS) Declaration of Conformance Joint Environmental Management System (EMS) Declaration of...

197

Malibu Joint Venture | Open Energy Information  

Open Energy Info (EERE)

Malibu Joint Venture Malibu Joint Venture Jump to: navigation, search Name Malibu Joint Venture Place Germany Sector Solar Product String representation "German utility ... e of next year." is too long. References Malibu Joint Venture[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Malibu Joint Venture is a company located in Germany . References ↑ "Malibu Joint Venture" Retrieved from "http://en.openei.org/w/index.php?title=Malibu_Joint_Venture&oldid=348612" Categories: Clean Energy Organizations Companies Organizations Stubs What links here Related changes Special pages Printable version Permanent link Browse properties 429 Throttled (bot load) Error 429 Throttled (bot load)

198

ADVANCED CUTTINGS TRANSPORT STUDY  

SciTech Connect

This is the fourth quarterly progress report for Year-3 of the ACTS Project. It includes a review of progress made in: (1) Flow Loop construction and development and (2) research tasks during the period of time between April 1, 2002 and June 30, 2002. This report presents a review of progress on the following specific tasks: (a) Design and development of an Advanced Cuttings Transport Facility (Task 3: Addition of a Cuttings Injection/Separation System), (b) Research project (Task 6): ''Study of Cuttings Transport with Foam Under LPAT Conditions (Joint Project with TUDRP)''; (c) Research project (Task 9b): ''Study of Foam Flow Behavior Under EPET Conditions''; (d) Research project (Task 10): ''Study of Cuttings Transport with Aerated Mud Under Elevated Pressure and Temperature Conditions''; (e) Research on three instrumentation tasks to measure: Cuttings concentration and distribution in a flowing slurry (Task 11), Foam texture while transporting cuttings. (Task 12), and Viscosity of Foam under EPET (Task 9b); (f) Development of a Safety program for the ACTS Flow Loop. Progress on a comprehensive safety review of all flow-loop components and operational procedures. (Task 1S); (g) Activities towards technology transfer and developing contacts with Petroleum and service company members, and increasing the number of JIP members.

Troy Reed; Stefan Miska; Nicholas Takach; Kaveh Ashenayi; Mark Pickell; Len Volk; Mike Volk; Evren Ozbayoglu; Lei Zhou

2002-07-30T23:59:59.000Z

199

ADVANCED CUTTINGS TRANSPORT STUDY  

Science Conference Proceedings (OSTI)

This is the third quarterly progress report for Year 3 of the ACTS Project. It includes a review of progress made in: (1) Flow Loop construction and development and (2) research tasks during the period of time between Jan. 1, 2002 and Mar. 31, 2002. This report presents a review of progress on the following specific tasks: (a) Design and development of an Advanced Cuttings Transport Facility (Task 3: Addition of a Cuttings Injection/Separation System), (b) Research project (Task 6): ''Study of Cuttings Transport with Foam Under LPAT Conditions (Joint Project with TUDRP)'', (c) Research project (Task 9b): ''Study of Foam Flow Behavior Under EPET Conditions'', (d) Research project (Task 10): ''Study of Cuttings Transport with Aerated Mud Under Elevated Pressure and Temperature Conditions'', (e) Research on three instrumentation tasks to measure: Cuttings concentration and distribution in a flowing slurry (Task 11), Foam texture while transporting cuttings. (Task 12), and Viscosity of Foam under EPET (Task 9b); (f) Development of a Safety program for the ACTS Flow Loop, progress on a comprehensive safety review of all flow-loop components and operational procedures. (Task 1S); and (g) Activities towards technology transfer and developing contacts with Petroleum and service company members, and increasing the number of JIP members.

Troy Reed; Stefan Miska; Nicholas Takach; Kaveh Ashenayi; Mark Pickell; Len Volk; Mike Volk; Evren Ozbayoglu; Lei Zhou

2002-04-30T23:59:59.000Z

200

ADVANCED CUTTINGS TRANSPORT STUDY  

Science Conference Proceedings (OSTI)

This is the second quarterly progress report for Year 3 of the ACTS project. It includes a review of progress made in: (1) Flow Loop development and (2) research tasks during the period of time between Oct 1, 2001 and Dec. 31, 2001. This report presents a review of progress on the following specific tasks: (a) Design and development of an Advanced Cuttings Transport Facility (Task 3: Addition of a Cuttings Injection/Collection System), (b) Research project (Task 6): ''Study of Cuttings Transport with Foam Under LPAT Conditions (Joint Project with TUDRP)'', (c) Research project (Task 9): ''Study of Foam Flow Behavior Under EPET Conditions'', (d) Research project (Task 10): ''Study of Cuttings Transport with Aerated Mud Under Elevated Pressure and Temperature Conditions'', (e) Research on instrumentation tasks to measure: Cuttings concentration and distribution in a flowing slurry (Task 11), and Foam properties while transporting cuttings. (Task 12), (f) Development of a Safety program for the ACTS Flow Loop. Progress on a comprehensive safety review of all flow-loop components and operational procedures. (Task 1S). (g) Activities towards technology transfer and developing contacts with Petroleum and service company members, and increasing the number of JIP members.

Troy Reed; Stefan Miska; Nicholas Takach; Kaveh Ashenayi; Gerald Kane; Mark Pickell; Len Volk; Mike Volk; Affonso Lourenco; Evren Ozbayoglu; Lei Zhou

2002-01-30T23:59:59.000Z

Note: This page contains sample records for the topic "advanced joint inversion" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

3-D Inversion Of Borehole-To-Surface Electrical Data Using A  

Open Energy Info (EERE)

source source History View New Pages Recent Changes All Special Pages Semantic Search/Querying Get Involved Help Apps Datasets Community Login | Sign Up Search Page Edit History Facebook icon Twitter icon » 3-D Inversion Of Borehole-To-Surface Electrical Data Using A Back-Propagation Neural Network Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Journal Article: 3-D Inversion Of Borehole-To-Surface Electrical Data Using A Back-Propagation Neural Network Details Activities (0) Areas (0) Regions (0) Abstract: The "fluid-flow tomography", an advanced technique for geoelectrical survey based on the conventional mise-a-la-masse measurement, has been developed by Exploration Geophysics Laboratory at the Kyushu University. This technique is proposed to monitor fluid-flow behavior

202

Advanced Research  

NLE Websites -- All DOE Office Websites (Extended Search)

05/2007 05/2007 NitrogeN evolutioN aNd CorrosioN MeChaNisMs With oxyCoMbustioN of Coal Description Under a grant from the University Coal Research (UCR) program, Brigham Young University (BYU) is leading a three-year research effort to investigate the physical processes that several common types of coal undergo during oxy-fuel combustion. Specifically, research addresses the mixture of gases emitted from burning, particularly such pollutants as nitrogen oxides (NO X ) and carbon dioxide (CO 2 ), and the potential for corrosion at the various stages of combustion. The UCR program is administered by the Advanced Research Program at the National Energy Technology Laboratory (NETL), under the U.S. Department of Energy's Office of

203

Joint inversion of marine seismic AVA and CSEM data using statistical rock-physics models and Markov random fields: Stochastic inversion of AVA and CSEM data  

E-Print Network (OSTI)

e.g. , CO2 sand and non-CO2 sand and shale) or three (e.g. ,CO2 sand, shale and brine sand). Let vectors ? and S be theif the lithotype is not shale, we have f ( S i | L i ) N ( ?

Chen, J.

2013-01-01T23:59:59.000Z

204

Joint inversion of marine seismic AVA and CSEM data using statistical rock-physics models and Markov random fields: Stochastic inversion of AVA and CSEM data  

E-Print Network (OSTI)

impedance, density, electrical resistivity, lithotypes,are inverted for electrical resistivity. Secondly, physical-and logarithmic electrical resistivity, between depths 2100

Chen, J.

2013-01-01T23:59:59.000Z

205

Joint torsion of several commuting operators.  

E-Print Network (OSTI)

We introduce the notion of joint torsion for several commuting operators satisfying a Fredholm condition. This new secondary invariant takes values in the group of invertibles of a field. It is constructed by comparing determinants associated with different filtrations of a Koszul complex. Our notion of joint torsion generalizes the Carey-Pincus joint torsion of a pair of commuting Fredholm operators. As an example, under more restrictive invertibility assumptions, we show that the joint torsion recovers the multiplicative Lefschetz numbers. Furthermore, in the case of Toeplitz operators over the polydisc we provide a link between the joint torsion and the Cauchy integral formula. We will also consider the algebraic properties of the joint torsion. They include a cocycle property, a symmetry property, a triviality property and a multiplicativity property. The proof of these results relies on a quite general comparison theorem for vertical and horizontal torsion isomorphisms associated with certain diagrams of chain complexes.

Jens Kaad

206

NIST Joint Cloud and Big Data Workshop  

Science Conference Proceedings (OSTI)

NIST Joint Cloud and Big Data Workshop. Purpose: ... The second and third days of the workshop focused on the intersection of Cloud and Big Data. ...

2013-01-31T23:59:59.000Z

207

Joint Outreach Task Group Calendar: September 2013  

Energy.gov (U.S. Department of Energy (DOE))

Joint Outreach Task Group (JOTG)has created a monthly calendar of community events to facilitate interagency and community involvement in these events. September 2013

208

U.S.-Japan Joint Statement  

NLE Websites -- All DOE Office Websites (Extended Search)

Release August 7, 2003 2003817 STATEMENT BY PHILIP T. REEKER, DEPUTY SPOKESMAN Joint Statement of The United States and Japan on High-Level Consultations on Climate Change...

209

A ”JOINT+MARGINAL” APPROACH TO PARAMETRIC ...  

E-Print Network (OSTI)

the cost vector (of the objective function to optimize) are random variables with joint distribution ?, some bounds on the expected optimal value have been ...

210

High-temperature brazed ceramic joints  

DOE Patents (OSTI)

High-temperature joints formed from metallized ceramics are disclosed wherein the metal coatings on the ceramics are vacuum sputtered thereon.

Jarvinen, Philip O. (Amherst, NH)

1986-01-01T23:59:59.000Z

211

Joint minimization with alternating Bregman proximity operators  

E-Print Network (OSTI)

Dec 28, 2004 ... Joint minimization with alternating Bregman proximity operators. H. H. Bauschke (hbauschk ***at*** uoguelph.ca) P. L. Combettes (plc ***at*** ...

212

Collaborations and Joint R&D  

Collaborations and Joint R&D. R&D Collaborations Map. These stories highlight some of the ways Argonne has worked with industrial companies to improve processes ...

213

Joint Actinide Shock Physics Experimental Research | National...  

National Nuclear Security Administration (NNSA)

Home > About Us > Our Programs > Defense Programs > Office of Research, Development, Test Capabilities and Evaluation > Office of Research and Development > Facilities > Joint...

214

Genomic Advances to Improve Biomass for Biofuels (Genomics and Bioenergy)  

DOE Green Energy (OSTI)

Lawrence Berkeley National Lab bioscientist Daniel Rokhsar discusses genomic advances to improve biomass for biofuels. He presented his talk Feb. 11, 2008 in Berkeley, California as part of Berkeley Lab's community lecture series. Rokhsar works with the U.S. Department of Energy's Joint Genome Institute and Berkeley Lab's Genomics Division.

Rokhsar, Daniel

2008-02-11T23:59:59.000Z

215

Joint Statement of the U.S.-Iraq Joint Coordinating Committee on Energy |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Joint Statement of the U.S.-Iraq Joint Coordinating Committee on Joint Statement of the U.S.-Iraq Joint Coordinating Committee on Energy Joint Statement of the U.S.-Iraq Joint Coordinating Committee on Energy April 23, 2012 - 2:25pm Addthis The governments of the United States of America and the Republic of Iraq reaffirmed their commitment to joint cooperation in the areas of oil production and export, natural gas, electricity, and critical energy infrastructure protection during the inaugural meeting of the Joint Coordinating Committee (JCC) on Energy on April 23, 2012. This meeting, held at the U.S. Department of Energy, was co-chaired by Iraqi Deputy Prime Minister for Energy Dr. Hussain Al Shahristani and U.S. Deputy Secretary of Energy Daniel Poneman and Special Envoy and Coordinator for International Energy Affairs at the U.S. Department of State Ambassador

216

Joint Statement of the U.S.-Iraq Joint Coordinating Committee on Energy |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Joint Statement of the U.S.-Iraq Joint Coordinating Committee on Joint Statement of the U.S.-Iraq Joint Coordinating Committee on Energy Joint Statement of the U.S.-Iraq Joint Coordinating Committee on Energy April 23, 2012 - 2:25pm Addthis The governments of the United States of America and the Republic of Iraq reaffirmed their commitment to joint cooperation in the areas of oil production and export, natural gas, electricity, and critical energy infrastructure protection during the inaugural meeting of the Joint Coordinating Committee (JCC) on Energy on April 23, 2012. This meeting, held at the U.S. Department of Energy, was co-chaired by Iraqi Deputy Prime Minister for Energy Dr. Hussain Al Shahristani and U.S. Deputy Secretary of Energy Daniel Poneman and Special Envoy and Coordinator for International Energy Affairs at the U.S. Department of State Ambassador

217

Analysis of boiling experiment using inverse modeling  

DOE Green Energy (OSTI)

Numerical predictions of geothermal reservoir behavior strongly depend on the assumed steam-water relative permeabilities, which are difficult and time-consuming to measure in the laboratory. This paper describes the esti- mation of the parameters of the relative per- meability and capillary pressure functions by automatically matching simulation results to data from a transient boiling experiment performed on a Berea sandstone. A sensitivity analysis reveals the strong dependence of the observed system behavior on effects such as heat transfer from the heater to the core, as well as heat losses through the insulation. Parameters of three conceptual models were estimated by inverse modeling. Each calibra- tion yields consistent effective steam perme- abilities, but the shape of the liquid relative permeability remains ambiguous.

Finsterle, S.; Guerrero, M.; Satik, C.

1998-05-01T23:59:59.000Z

218

The twin bilinear diffie-Hellman inversion problem and applications  

Science Conference Proceedings (OSTI)

We propose a new computational problem and call it the twin bilinear Diffie-Hellman inversion (BDHI) problem. Inspired by the technique proposed by Cash, Kiltz and Shoup, we have developed a new trapdoor test which enables us to prove that the twin BDHI ... Keywords: bilinear diffie-Hellman inversion problem, identity-based encryption, identity-based key encapsulation, trapdoor test, twin bilinear diffie-Hellman inversion problem

Yu Chen; Liqun Chen

2010-12-01T23:59:59.000Z

219

Butamax Advanced Biofuels LLC | Open Energy Information  

Open Energy Info (EERE)

Butamax Advanced Biofuels LLC Butamax Advanced Biofuels LLC Jump to: navigation, search Name Butamax Advanced Biofuels LLC Place Wilmington, Delaware Zip 19880-0268 Sector Biofuels Product Delaware-based biofuels joint venture between Dupont and BP that was formed in 2009 to develop biobutanol. Coordinates 42.866922°, -72.868494° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":42.866922,"lon":-72.868494,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

220

Illinois Center for Advanced Tribology  

NLE Websites -- All DOE Office Websites (Extended Search)

t t r i b o l o g y Health and BioTribology A virtual center that brings together the skills and talents of multiple investigators and unique facilities from Argonne National Laboratory and three partnering universities to resolve critical friction, wear, and lubrication issues in Biomedical Implants, Alternative Energy Technologies, and Extreme Environments. The Center's tribology experts will work closely with industry, and with state and federal agencies through jointly funded research projects, to perform leading-edge research on the impact of materials, coatings, and fluids on energy efficiency, durability, and reliability. The work will culminate in the development of * Advanced models of the fundamental mechanisms responsible for friction and wear,

Note: This page contains sample records for the topic "advanced joint inversion" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Inversion of synthetic aperture radar interferograms for sources...  

Open Energy Info (EERE)

Inversion of synthetic aperture radar interferograms for sources of production-related subsidence at the Dixie Valley geothermal field Jump to: navigation, search OpenEI Reference...

222

Importance of Elevation and Temperature Inversions for the Interpretat...  

Open Energy Info (EERE)

Importance of Elevation and Temperature Inversions for the Interpretation of Thermal Infrared Satellite Images Used in Geothermal Exploration Jump to: navigation, search GEOTHERMAL...

223

Joint Institute for High Temperatures  

National Nuclear Security Administration (NNSA)

Joint Institute for High Temperatures of Russian Academy of Sciences Moscow Institute of Physics and Technology Extended title Extended title Excited state of warm dense matter or Exotic state of warm dense matter or Novel form of warm dense matter or New form of plasma Three sources of generation similarity: solid state density, two temperatures: electron temperature about tens eV, cold ions keep original crystallographic positions, but electron band structure and phonon dispersion are changed, transient but steady (quasi-stationary for a short time) state of non-equilibrium, uniform plasmas (no reference to non-ideality, both strongly and weakly coupled plasmas can be formed) spectral line spectra are emitted by ion cores embedded in plasma environment which influences the spectra strongly,

224

Joint NOAA, Navy, NASA Hurricane Test Bed Terms of Reference  

E-Print Network (OSTI)

(JHT) to advance the transfer of new research and technology into operational hurricane prediction. The JHT will routinely serve as a conduit between the operational, academic, and research communities. This facility will be located at the National Hurricane Center (NHC) in Miami, FL. Whereas the operational center and associated personnel could be the NHC, the Joint Typhoon Warning Center (JTWC, Navy), or the Central Pacific Hurricane Center (CPHC), and NHC will be specified in this document, both for brevity and to acknowledge the current focus of the JHT on that organization. Use of other facilities is possible depending on requirements, workload, and opportunity. II. Mission Statement The mission of the Joint (NOAA, Navy, and NASA) Hurricane Test Bed is to transfer more rapidly and smoothly new technology, research results, and observational advances of the USWRP, its sponsoring agencies, the academic community and other groups into improved tropical cyclone analysis and prediction at operational centers. III. Concept of Operations The JHT is the initial test bed activity funded by the USWRP and is established to accelerate the technology infusion focused on hurricane analysis and prediction. Until all test beds are organized under a national test bed activity, the USWRP Interagency Program Office (IPO) provides coordination and oversight. The USWRP/IPO will facilitate outreach, the proposal process, and interaction with the oversight board, funding, and other tasks common to the test beds. The JHT will work with the USWRP/IPO to accomplish those tasks appropriate for administration of the hurricane test bed. The JHT mission will be accomplished by the following: • assessing scientific breakthroughs and new techniques to identify advanced, realtime, data-analysis techniques, forecast models, and observational systems that have potential for significantly improving the forecast guidance provided to hurricane forecasters; completing tests of the codes, products, and observations in a quasi-operational information technology (IT) environment subject to metrics that mandate good scientific performance while meeting ease-of use criteria and time constraints;

unknown authors

2012-01-01T23:59:59.000Z

225

Biofluid lubrication for artificial joints  

E-Print Network (OSTI)

This research investigated biofluid lubrication related to artificial joints using tribological and rheological approaches. Biofluids studied here represent two categories of fluids, base fluids and nanostructured biofluids. Base fluids were studied through comparison of synthetic fluids (simulated body fluid and hyaluronic acid) as well as natural biofluids (from dogs, horses, and humans) in terms of viscosity and fluid shear stress. The nano-structured biofluids were formed using molecules having well-defined shapes. Understanding nano-structured biofluids leads to new ways of design and synthesis of biofluids that are beneficial for artificial joint performance. Experimental approaches were utilized in the present research. This includes basic analysis of biofluids’ property, such as viscosity, fluid shear stress, and shear rate using rheological experiments. Tribological investigation and surface characterization were conducted in order to understand effects of molecular and nanostructures on fluid lubrication. Workpiece surface structure and wear mechanisms were investigated using a scanning electron microscope and a transmission electron microscope. The surface topography was examined using a profilometer. The results demonstrated that with the adding of solid additives, such as crown ether or fullerene acted as rough as the other solids in the 3-body wear systems. In addition, the fullerene supplied low friction and low wear, which designates the lubrication purpose of this particular particle system. This dissertation is constructed of six chapters. The first chapter is an introduction to body fluids, as mentioned earlier. After Chapter II, it examines the motivation and approach of the present research, Chapter III discusses the experimental approaches, including materials, experimental setup, and conditions. In Chapter IV, lubrication properties of various fluids are discussed. The tribological properties and performance nanostructured biofluids are discussed in Chapter V, followed by summary and conclusions in Chapter VI.

Pendelton, Alice Mae

2008-12-01T23:59:59.000Z

226

II.AdvancedTcl Advanced Tcl  

E-Print Network (OSTI)

119 P A R T II.AdvancedTcl II Advanced Tcl Part II describes advanced programming techniques that support sophisticated applications. The Tcl interfaces remain simple, so you can quickly construct pow- erful applications. Chapter 10 describes eval, which lets you create Tcl programs on the fly

Chen, Yuanzhu Peter

227

High temperature ceramic/metal joint structure  

DOE Patents (OSTI)

A high temperature turbine engine includes a hybrid ceramic/metallic rotor member having ceramic/metal joint structure. The disclosed joint is able to endure higher temperatures than previously possible, and aids in controlling heat transfer in the rotor member.

Boyd, Gary L. (Tempe, AZ)

1991-01-01T23:59:59.000Z

228

Integrated Joint Actuator for Serpentine Robots  

E-Print Network (OSTI)

Abstract—Serpentine robots, also sometimes called “snake robots, ” are slender, multisegmented vehicles designed to provide greater mobility than conventional wheeled or tracked robots. Serpentine robots are typically comprised of three or more rigid segments connected by two or three degrees of freedom joints. The segments typically have powered wheels, tracks, or legs to propel the vehicle forward; the joints may be powered or unpowered. We have developed a joint actuator system that is highly optimized for use in serpentine robots. This article first presents an analysis of the particular requirements for joint actuators in serpentine robots. We then compare existing actuators against those requirements and show that pneumatic bellows are ideally suited for this application. Following this analysis, this paper introduces our fully functional, pneumatically operated actuation system that is efficiently integrated in the space occupied by a joint. This system,

Grzegorz Granosik; Johann Borenstein; Senior Member

2005-01-01T23:59:59.000Z

229

Alternative and Advanced Fuels  

Energy.gov (U.S. Department of Energy (DOE))

There are a variety of alternative and advanced fuels available, which are used to fuel alternative and advanced vehicles. Learn more about:

230

Help - Advanced Search  

NLE Websites -- All DOE Office Websites (Extended Search)

Advanced Search The advanced search form will help you create a more specific search in the Publications database. First, specify your search criteria. You can search by author,...

231

Materials Science & Tech Division | Advanced Materials | ORNL  

NLE Websites -- All DOE Office Websites (Extended Search)

Supporting Organizations Supporting Organizations Center for Nanophase Materials Sciences Chemical Sciences Division Materials Science and Technology BES Chemical Sciences, Geosciences, and Biosciences Program BES Materials Sciences and Engineering Program Joint Institute For Advanced Materials Advanced Materials Home | Science & Discovery | Advanced Materials | Supporting Organizations | Materials Science and Technology SHARE Materials Science and Technology Division The Materials Science and Technology Division is unique within the Department of Energy (DOE) System with mission goals that extend from fundamental materials science to applied materials science and technology. One key component of the division is a strong Basic Energy Sciences (BES) portfolio that pushes the frontiers of materials theory, synthesis

232

Secretary Chu Announces $37.5 Million Available for Joint U.S.-Chinese  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

7.5 Million Available for Joint 7.5 Million Available for Joint U.S.-Chinese Clean Energy Research Secretary Chu Announces $37.5 Million Available for Joint U.S.-Chinese Clean Energy Research March 29, 2010 - 12:00am Addthis Washington, DC - U.S. Energy Secretary Steven Chu announced today the availability of $37.5 million in U.S. funding over the next five years to support the U.S.-China Clean Energy Research Center. Funding from the Department of Energy will be matched by the grantees to support $75 million in total U.S. research that will focus on advancing technologies for building energy efficiency, clean coal including carbon capture and storage, and clean vehicles. The Clean Energy Research Center (CERC) will be located in existing facilities in both the U.S. and China and will

233

Secretary Chu Announces $37.5 Million Available for Joint U.S.-Chinese  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Announces $37.5 Million Available for Joint Announces $37.5 Million Available for Joint U.S.-Chinese Clean Energy Research Secretary Chu Announces $37.5 Million Available for Joint U.S.-Chinese Clean Energy Research March 29, 2010 - 12:00am Addthis Washington, DC - U.S. Energy Secretary Steven Chu announced today the availability of $37.5 million in U.S. funding over the next five years to support the U.S.-China Clean Energy Research Center. Funding from the Department of Energy will be matched by the grantees to support $75 million in total U.S. research that will focus on advancing technologies for building energy efficiency, clean coal including carbon capture and storage, and clean vehicles. The Clean Energy Research Center (CERC) will be located in existing facilities in both the U.S. and China and will

234

Fact Sheet: United States-Japan Joint Nuclear Energy Action Plan  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

United States-Japan Joint Nuclear Energy Action Plan United States-Japan Joint Nuclear Energy Action Plan The United States-Japan Joint Nuclear Energy Action Plan is intended to provide a framework for bilateral collaboration in nuclear energy. This Action Plan builds upon our significant, longstanding civilian nuclear cooperation, and will contribute to increasing energy security and managing nuclear waste, addressing nuclear nonproliferation and climate change, advancing goals put forth in President Bush's Global Nuclear Energy Partnership (GNEP) initiative. The Action Plan was signed by representatives of both nations in April 2007. The Action Plan will be implemented by Steering Committee Co-Chairs. Assistant Secretary of Energy Dennis Spurgeon, or his designee, will serve as the U.S. Co-Chair. Japanese Co-Chairs will be selected

235

Parallel implementation of stochastic inversion of seismic tomography data  

Science Conference Proceedings (OSTI)

In this paper parallel implementation of stochastic inversion of seismic tomography data was presented. Classical approach to travel time tomography assumes straight line of seismic rays between sources and receives points and isotropy of geological ... Keywords: inverse problem, master-slave paradigm, seismic anisotropy, seismic tomography

Maciej Dwornik; Anna Pi?ta

2011-09-01T23:59:59.000Z

236

Distribution et association des inversions chromosomiques dans trois populations naturelles  

E-Print Network (OSTI)

, one on each of the major autosome arms, are cosmopolitan. The Tunisian popu- lation shows the greatest distribution of cosmopolitan inversions between individuals of the French population is observed in the Tunisian lines. Linkage disequilibrium exists between pair of cosmopolitan inversions of the #12;second

Recanati, Catherine

237

Parallel algorithms for solution of air pollution inverse problems  

Science Conference Proceedings (OSTI)

Parallelization of Marchuk's method for solution of inverse problems based on adjoint equations and dual representation of contaminant concentration functional is considered here. There are N individual adjoint equations independently solved at each ... Keywords: air pollution, domain decomposition, functional decomposition, inverse problems, parallel algorithms

Alexander Starchenko; Elena Panasenko

2010-05-01T23:59:59.000Z

238

Inverse Modelling of the Kawerau Geothermal Reservoir, NZ  

DOE Green Energy (OSTI)

In this paper we describe an existing model of the Kawerau geothermal field and attempts to improve this model using inverse modeling techniques. A match of model results to natural state temperatures and pressures at three reference depths are presented. These are used to form and ''objective function'' to be minimized by inverse modeling.

White, S.P.

1995-01-01T23:59:59.000Z

239

Inverse problem of time-dependent heat sources numerical reconstruction  

Science Conference Proceedings (OSTI)

Abstract: This work studies the inverse problem of reconstructing a time-dependent heat source in the heat conduction equation using the temperature measurement specified at an internal point. Problems of this type have important applications in several ... Keywords: 35R30, 49J20, Green function, Heat source, Inverse problem, Landweber iteration, Numerical results

Liu Yang; Mehdi Dehghan; Jian-Ning Yu; Guan-Wei Luo

2011-04-01T23:59:59.000Z

240

Aerosol Size Distributions from Genetic Inversion of Polar Nephelometer Data  

Science Conference Proceedings (OSTI)

It is shown that genetic inversions can be used to recover lognormal aerosol size distributions from multiangle optical scattering cross-section data measured by a polar nephelometer at a wavelength of 0.532 ?m. The inversions can also be used to ...

B. R. Lienert; J. N. Porter; S. K. Sharma

2003-10-01T23:59:59.000Z

Note: This page contains sample records for the topic "advanced joint inversion" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

United States-Japan Joint Nuclear Energy Action Plan | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

United States-Japan Joint Nuclear Energy Action Plan United States-Japan Joint Nuclear Energy Action Plan An outline on the United States and Japan's joint nuclear energy action...

242

U.S.-Brazil Strategic Energy Dialogue Joint Report | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Brazil Strategic Energy Dialogue Joint Report U.S.-Brazil Strategic Energy Dialogue Joint Report First Joint Report to Presidents on U.S.-Brazil Strategic Energy Dialogue.pdf More...

243

Inversion of synthetic aperture radar interferograms for sources of  

Open Energy Info (EERE)

Inversion of synthetic aperture radar interferograms for sources of Inversion of synthetic aperture radar interferograms for sources of production-related subsidence at the Dixie Valley geothermal field Jump to: navigation, search OpenEI Reference LibraryAdd to library Journal Article: Inversion of synthetic aperture radar interferograms for sources of production-related subsidence at the Dixie Valley geothermal field Authors Bill Foxall and D. W. Vasco Published Journal Journal of Volcanology and Geothermal Research, 2008 DOI Not Provided Check for DOI availability: http://crossref.org Online Internet link for Inversion of synthetic aperture radar interferograms for sources of production-related subsidence at the Dixie Valley geothermal field Citation Bill Foxall,D. W. Vasco. 2008. Inversion of synthetic aperture radar interferograms for sources of production-related subsidence at the Dixie

244

New advances in three-dimensional controlled-source electromagnetic inversion  

E-Print Network (OSTI)

base funding provided by the ExxonMobil Corporation and thedata, and Dmitriy A. Pavlov of ExxonMobil for many fruitful

Commer, Michael; Newman, Gregory A.

2007-01-01T23:59:59.000Z

245

New results on the resistivity structure of Merapi Volcano(Indonesia), derived from 3D restricted inversion of long-offsettransient electromagnetic data  

SciTech Connect

Three long-offset transient electromagnetic (LOTEM) surveyswerecarried out at the active volcano Merapi in Central Java (Indonesia)during the years 1998, 2000, and 2001. The measurements focused on thegeneral resistivity structure of the volcanic edifice at depths of 0.5-2km and the further investigation of a southside anomaly. The measurementswere insufficient for a full 3D inversion scheme, which could enable theimaging of finely discretized resistivity distributions. Therefore, astable, damped least-squares joint-inversion approach is used to optimize3D models with a limited number of parameters. The mode ls feature therealistic simulation of topography, a layered background structure, andadditional coarse 3D blocks representing conductivity anomalies.Twenty-eight LOTEM transients, comprising both horizontal and verticalcomponents of the magnetic induction time derivative, were analyzed. Inview of the few unknowns, we were able to achieve reasonable data fits.The inversion results indicate an upwelling conductor below the summit,suggesting hydrothermal activity in the central volcanic complex. Ashallow conductor due to a magma-filled chamber, at depths down to 1 kmbelow the summit, suggested by earlier seismic studies, is not indicatedby the inversion results. In conjunction with an anomalous-density model,derived from arecent gravity study, our inversion results provideinformation about the southern geological structure resulting from amajor sector collapse during the Middle Merapi period. The density modelallows to assess a porosity range andthus an estimated vertical salinityprofile to explain the high conductivities on a larger scale, extendingbeyond the foothills of Merapi.

Commer, Michael; Helwig, Stefan, L.; Hordt, Andreas; Scholl,Carsten; Tezkan, Bulent

2006-06-14T23:59:59.000Z

246

Linearized Functional Minimization for Inverse Modeling  

SciTech Connect

Heterogeneous aquifers typically consist of multiple lithofacies, whose spatial arrangement significantly affects flow and transport. The estimation of these lithofacies is complicated by the scarcity of data and by the lack of a clear correlation between identifiable geologic indicators and attributes. We introduce a new inverse-modeling approach to estimate both the spatial extent of hydrofacies and their properties from sparse measurements of hydraulic conductivity and hydraulic head. Our approach is to minimize a functional defined on the vectors of values of hydraulic conductivity and hydraulic head fields defined on regular grids at a user-determined resolution. This functional is constructed to (i) enforce the relationship between conductivity and heads provided by the groundwater flow equation, (ii) penalize deviations of the reconstructed fields from measurements where they are available, and (iii) penalize reconstructed fields that are not piece-wise smooth. We develop an iterative solver for this functional that exploits a local linearization of the mapping from conductivity to head. This approach provides a computationally efficient algorithm that rapidly converges to a solution. A series of numerical experiments demonstrates the robustness of our approach.

Wohlberg, Brendt [Los Alamos National Laboratory; Tartakovsky, Daniel M. [University of California, San Diego; Dentz, Marco [Institute of Environmental Assessment and Water Research, Barcelona, Spain

2012-06-21T23:59:59.000Z

247

Sealed joint structure for electrochemical device  

DOE Patents (OSTI)

Several members make up a joint in a high-temperature electrochemical device, wherein the various members perform different functions. The joint is useful for joining multiple cells (generally tubular modules) of an electrochemical device to produce a multi-cell segment-in-series stack for a solid oxide fuel cell, for instance. The joint includes sections that bond the joining members to each other; one or more seal sections that provide gas-tightness, and sections providing electrical connection and/or electrical insulation between the various joining members. A suitable joint configuration for an electrochemical device has a metal joint housing, a first porous electrode, a second porous electrode, separated from the first porous electrode by a solid electrolyte, and an insulating member disposed between the metal joint housing and the electrolyte and second electrode. One or more brazes structurally and electrically connects the first electrode to the metal joint housing and forms a gas tight seal between the first electrode and the second electrode.

Tucker, Michael C; Jacobson, Craig P; De Jonghe, Lutgard C; Visco, Steven J

2013-05-21T23:59:59.000Z

248

Joint nuclear safety research projects between the US and Russian Federation International Nuclear Safety Centers  

SciTech Connect

The Russian Federation Ministry for Atomic Energy (MINATOM) and the US Department of Energy (USDOE) formed international Nuclear Safety Centers in October 1995 and July 1996, respectively, to collaborate on nuclear safety research. Since January 1997, the two centers have initiated the following nine joint research projects: (1) INSC web servers and databases; (2) Material properties measurement and assessment; (3) Coupled codes: Neutronic, thermal-hydraulic, mechanical and other; (4) Severe accident management for Soviet-designed reactors; (5) Transient management and advanced control; (6) Survey of relevant nuclear safety research facilities in the Russian Federation; (8) Advanced structural analysis; and (9) Development of a nuclear safety research and development plan for MINATOM. The joint projects were selected on the basis of recommendations from two groups of experts convened by NEA and from evaluations of safety impact, cost, and deployment potential. The paper summarizes the projects, including the long-term goals, the implementing strategy and some recent accomplishments for each project.

Bougaenko, S.E.; Kraev, A.E. [International Nuclear Safety Center of the Russian MINATOM, Moscow (Russian Federation); Hill, D.L.; Braun, J.C.; Klickman, A.E. [Argonne National Lab., IL (United States). International Nuclear Safety Center

1998-08-01T23:59:59.000Z

249

Advanced Materials in MML  

Science Conference Proceedings (OSTI)

... Advanced Materials Characterization. Fusion Wall Development Research by Neutron Depth Profiling. < Previous 1 2 3 Next ». ...

2012-06-12T23:59:59.000Z

250

Advanced turbine systems program overview  

SciTech Connect

The US Department of Energy`s (DOE) Office of Fossil Energy and Office of Energy Efficiency & Renewable Energy are jointly supporting a program to develop Advanced Turbine Systems (ATS). Demonstrations of commercial prototypes will be completed by the year 2000 for both utility- and industrial-scale applications. The program is primarily directed toward natural gas utilization, but eventual application of the technology to coal-fired systems is not overlooked. In major procurements, contractors are required to address (in paper studies though not in testing) the eventual adaptation of their systems to coal firing. Implementation of the program is proceeding well. Phase 1 systems studies have been completed, and Phase 2 concept development has been underway for about a year. Release of solicitation for Phase 3 proposals has been announced for July, 1994. This phase of the program will see teams led by turbine manufacturers move into full scale testing of critical components. Generic research and development has been proceeding in parallel with the major development effort. METC has started testing in their Advanced Turbine Combustion test facility, and Oak Ridge National Laboratory has initiated a materials test program. The industry/university consortium established by the South Carolina Energy Research and Development Center has completed their second round of university awards, with 23 university projects now underway.

Webb, H.A.

1994-10-01T23:59:59.000Z

251

United States and Japan Sign Joint Nuclear Energy Action Plan...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Japan Sign Joint Nuclear Energy Action Plan to Promote Nuclear Energy Cooperation United States and Japan Sign Joint Nuclear Energy Action Plan to Promote Nuclear Energy...

252

Enjoy The Benefits of Joint ASM/TMS Chapter Membership  

Science Conference Proceedings (OSTI)

Enjoy The Benefits of Joint ASM/TMS Chapter Membership. There are many benefits of being a part of the Joint ASM/TMS Student Program—scholarships, ...

253

EA-1945: Northern Mid-Columbia Joint Project; Grant, Douglas...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

5: Northern Mid-Columbia Joint Project; Grant, Douglas, and Chelan Counties, Washington EA-1945: Northern Mid-Columbia Joint Project; Grant, Douglas, and Chelan Counties,...

254

Second National Report for the Joint Convention on the Safety...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Second National Report for the Joint Convention on the Safety of Spent Fuel Management and on the Safety of Radioactive Waste Management Second National Report for the Joint...

255

Fracture Mechanics of Solder Joint under Mechanical Fatigue  

Science Conference Proceedings (OSTI)

Structural similarities in solder joint used in these studies yet varying locations of cracking site suggest that fracture in solder joint is affected greatly by a subtle ...

256

United States -Japan Joint Nuclear Energy Action Plan | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

United States -Japan Joint Nuclear Energy Action Plan United States -Japan Joint Nuclear Energy Action Plan President Bush of the United States and Prime Minister Koizumi of Japan...

257

OMB and CEQ Joint Memorandum on Environmental Collaboration and...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

OMB and CEQ Joint Memorandum on Environmental Collaboration and Conflict Resolution OMB and CEQ Joint Memorandum on Environmental Collaboration and Conflict Resolution This Office...

258

Joint Institute for Neutron Sciences | ornl.gov  

NLE Websites -- All DOE Office Websites (Extended Search)

Joint Institute for Neutron Sciences SHARE Joint Institute for Neutron Sciences JINS is located on Chestnut Ridge within the 80-acre SNS site, part of Oak Ridge National...

259

Fourth National Report for the Joint Convention on the Safety...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Fourth National Report for the Joint Convention on the Safety of Spent Fuel Management and on the Safety of Radioactive Waste Management Fourth National Report for the Joint...

260

Projects Selected for Funding Under the Joint NYSERDA / DOE Energy...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Projects Selected for Funding Under the Joint NYSERDA DOE Energy Storage Initiative Projects Selected for Funding Under the Joint NYSERDA DOE Energy Storage Initiative New York...

Note: This page contains sample records for the topic "advanced joint inversion" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Transcript of March 4, 2011 Joint Public Meeting | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Transcript of March 4, 2011 Joint Public Meeting Transcript of March 4, 2011 Joint Public Meeting Official Transcript of Proceedings - Nuclear Regulatory Commission Transcript of...

262

TMS/ASM Joint Commission on Metallurgical Transactions  

Science Conference Proceedings (OSTI)

TMS/ASM Joint Commission on Metallurgical Transactions. The function of the Joint Commission is as follows: Consistent with the Purpose and Scope of ...

263

Third National Report for the Joint Convention on the Safety...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Third National Report for the Joint Convention on the Safety of Spent Fuel Management and on the Safety of Radioactive Waste Management Third National Report for the Joint...

264

Joint Urban 2003: Indoor Measurements Final Data Report  

NLE Websites -- All DOE Office Websites (Extended Search)

Joint Urban 2003: Indoor Measurements Final Data Report Title Joint Urban 2003: Indoor Measurements Final Data Report Publication Type Report Year of Publication 2004 Authors...

265

Rooted in Wonder: Joint Genome Institute Study Reveals Amazing...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Rooted in Wonder: Joint Genome Institute Study Reveals Amazing World Underfoot Rooted in Wonder: Joint Genome Institute Study Reveals Amazing World Underfoot August 13, 2012 -...

266

National Report Joint Convention on the Safety of Spent Fuel...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

National Report Joint Convention on the Safety of Spent Fuel Management and on the Safety of Radioactive Waste Management National Report Joint Convention on the Safety of Spent...

267

Secretary Bodman, Director Rumyantsev Issue Joint Statement on...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Bodman, Director Rumyantsev Issue Joint Statement on Bratislava Nuclear Security Initiatives Secretary Bodman, Director Rumyantsev Issue Joint Statement on Bratislava Nuclear...

268

Joint Maintenance Status Report of Potomac Electric Power Company...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Joint Maintenance Status Report of Potomac Electric Power Company amd PJM Interconnection, LLC Joint Maintenance Status Report of Potomac Electric Power Company amd PJM...

269

Application of High Performance Computing to the DOE Joint Genomic...  

NLE Websites -- All DOE Office Websites (Extended Search)

Application of High Performance Computing to the DOE Joint Genomic Institute's Data Challenges January 25-26, 2010 DOE Joint Genome Institute, Walnut Creek, CA USA -by invitation...

270

US - Brazil Binational Energy Working Group Joint Action Plan...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

US - Brazil Binational Energy Working Group Joint Action Plan US - Brazil Binational Energy Working Group Joint Action Plan brazilactionplan7202010.pdf More Documents &...

271

Joint Electrical Utilities (Iowa) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Joint Electrical Utilities (Iowa) Joint Electrical Utilities (Iowa) Joint Electrical Utilities (Iowa) < Back Eligibility Investor-Owned Utility Local Government Municipal/Public Utility Rural Electric Cooperative Tribal Government Utility Savings Category Alternative Fuel Vehicles Hydrogen & Fuel Cells Buying & Making Electricity Water Home Weatherization Solar Wind Program Info State Iowa Program Type Environmental Regulations Provider Iowa Utilities Board Cities may establish utilities to acquire existing electric generating facilities or distribution systems. Acquisition, in this statute, is defined as city involvement, and includes purchase, lease, construction, reconstruction, extension, remodeling, improvement, repair, and equipping of the facility. This chapter does not limit the powers or authority of

272

Behaviour of GFRP Adhesive Pipe Joints Subjected to Pressure and Axial Loadings  

E-Print Network (OSTI)

represent an attractive alternative for pipelines subjected to severe internal or external environments in onshore or offshore applications. One important issue in the design of GFRP pipe systems is the material anisotropy, which poses certain... properties, the fibre volume fraction and the winding angle. For pipe applications, ± 55° (with respect to the axial direction) fibre winding angles are commonly used. A further aspect in the design of any advanced composite system is the joint detail...

Lees, J. M.

2005-07-05T23:59:59.000Z

273

Estimation of field-scale soil hydraulic and dielectric parameters through joint inversion of GPR and hydrological data  

E-Print Network (OSTI)

Catalog of Vadose Zone Hydraulic Properties for the Hanfordand Measurement of the Hydraulic Properties of UnsaturatedEstimation for Soil Hydraulic Properties Using Zero-Offset

2005-01-01T23:59:59.000Z

274

Estimation of field-scale soil hydraulic and dielectric parameters through joint inversion of GPR and hydrological data  

E-Print Network (OSTI)

Zone Hydraulic Properties for the Hanford Site, Report PNNL-Percolation Theory: Tests of Hanford Site Soils, Vadose Zone200 East Vadose Test Site Hanford, Washington, Electrical

2005-01-01T23:59:59.000Z

275

Estimation of field-scale soil hydraulic and dielectric parameters through joint inversion of GPR and hydrological data  

E-Print Network (OSTI)

for model validation testing. NUREG/CR-5996 , U. S. Nuclearof unsaturated flow models, NUREG/CR-6411 , U. S. Nuclear

2005-01-01T23:59:59.000Z

276

Estimation of field-scale soil hydraulic and dielectric parameters through joint inversion of GPR and hydrological data  

E-Print Network (OSTI)

for the Hanford Site, Report PNNL-13672 , Pacific Northwestfield study, Report PNNL- 13982 , Pacific Northwest Nationaland Seismic Methods, Report PNNL-13791 , Pacific Northwest

2005-01-01T23:59:59.000Z

277

Time-lapse gravity: A numerical demonstration using robust inversion and joint interpretation of 4D surface and borehole data  

E-Print Network (OSTI)

(Davis et al., 2008), waterflood surveillance (Meyer, 2008; Ferguson et al., 2008; Nind et al., 2007b

278

Effect of PCC Joint Skew on Reflective Cracking in HMA Overlays  

E-Print Network (OSTI)

Reflective cracking is a relatively premature distress that occurs in HMA materials overlaying cracked and jointed underlying pavements. The high concentration of stresses and strains in the vicinity of the discontinuity of the old pavement causes the cracks to reflect into the newly placed HMA overlay. While it is a common practice to use skewed transverse joints in rigid pavements to improve the latter's performance, the impact of such a practice on the cracking of a potential HMA overlay has not been examined so far. In this context, this study investigates the effect of using skewed transverse joints in rigid pavements on reflective cracking development in the HMA overlay. Advanced three-dimensional Finite Element models including viscoelastic material properties for the HMA overlay, 3D beam modeling of dowel bars, non-uniform tire-pavement contact stresses, friction interfaces, and infinite boundary elements were constructed for both normal and skewed transverse joints using ABAQUS v-6.11. The potential for reflective cracking was monitored through the fracture mechanics J-integral parameter. Results obtained show, among other things, that the practice of skewing transverse joints increases the potential for reflective cracking development in the asphalt concrete overlay.

Ziad G. Ghauch

2011-10-14T23:59:59.000Z

279

DOE Joint Genome Institute: DOE JGI Releases Expanded Version of  

NLE Websites -- All DOE Office Websites (Extended Search)

28, 2009 28, 2009 DOE JGI Releases Expanded Version of Phytozome.net: Clearinghouse for Comparative Plant Genomics Data WALNUT CREEK, CA-An enhanced version of Phytozome.net, a web portal for comparative plant genomics geared to advance biofuel, food, feed, and fiber research, has been released by the U.S. Department of Energy (DOE) Joint Genome Institute (JGI). Phytozome provides a central "hub" for web access to a rapidly growing number of plant genomes, and includes tools for visualization of plant genomes and associated annotations, sequence analysis, and bulk, as well as targeted, plant data retrieval. The gene families available in Phytozome, defined at several evolutionarily significant epochs, provide a framework for the transfer of functional information to important biofuel and

280

Fuel Cell Technologies Office: Joint Fuel Cell Bus Workshop  

NLE Websites -- All DOE Office Websites (Extended Search)

Fuel Cell Bus Workshop Fuel Cell Bus Workshop The U.S. Department of Energy (DOE) and the U.S. Department of Transportation (DOT) held a Fuel Cell Bus Workshop on June 7, 2010 in Washington, D.C. in conjunction with the DOE Hydrogen and Fuel Cell Program Annual Merit Review. The workshop plenary and breakout session brought together technical experts from industry, end users, academia, DOE national laboratories, and other government agencies to address the status and technology needs of fuel cell powered buses. Meeting Summary Joint Fuel Cell Bus Workshop Summary Report Presentations Fuel Cell Bus Workshop Overview & Purpose, Dimitrios Papageorgopoulos, DOE Users Perspective on Advanced Fuel Cell Bus Technology, Nico Bouwkamp, CaFCP and Leslie Eudy, NREL Progress and Challenges for PEM Transit Fleet Applications, Tom Madden, UTC Power, LLC

Note: This page contains sample records for the topic "advanced joint inversion" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Energy Department Requests Proposals for Advanced Scientific Computing  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Requests Proposals for Advanced Scientific Requests Proposals for Advanced Scientific Computing Research Energy Department Requests Proposals for Advanced Scientific Computing Research December 27, 2005 - 4:55pm Addthis WASHINGTON, DC - The Department of Energy's Office of Science and the National Nuclear Security Administration (NNSA) have issued a joint Request for Proposals for advanced scientific computing research. DOE expects to fund $67 million annually for three years to five years under its Scientific Discovery through Advanced Computing (SciDAC) research program. Scientific computing, including modeling and simulation, has become crucial for research problems that are insoluble by traditional theoretical and experimental approaches, hazardous to study in the laboratory, or time-consuming or expensive to solve by traditional means.

282

Carbon sequestration monitoring with acoustic double-difference waveform inversion: A case study on SACROC walkaway VSP data  

Science Conference Proceedings (OSTI)

Geological carbon sequestration involves large-scale injection of carbon dioxide into underground geologic formations and is considered as a potential approach for mitigating global warming. Changes in reservoir properties resulting from the CO{sub 2} injection and migration can be characterized using waveform inversions of time-lapse seismic data. The conventional approach for analysis using waveform tomography is to take the difference of the images obtained using baseline and subsequent time-lapse datasets that are inverted independently. By contrast, double-difference waveform inversion uses timelapse seismic datasets to jointly invert for reservoir changes. We apply this method to a field time-lapse walkaway VSP data set acquired in 2008 and 2009 for monitoring CO{sub 2} injection at an enhanced oil recovery field at SACROC, Texas. The double-difference waveform inversion gives a cleaner and more easily interpreted image of reservoir changes, as compared to that obtained with the conventional scheme. Our results from the applicatoin of acoustic double-difference waveform tomography shows some zones with decreased P-wave velocity within the reservoir due to CO{sub 2} injection and migration.

Huang, Lianjie [Los Alamos National Laboratory; Fehler, Michael [MIT; Malcolm, Alison [MIT; Yang, Di [MIT

2011-01-01T23:59:59.000Z

283

Advances in welding science - a perspective  

SciTech Connect

The ultimate goal of welding technology is to improve the joint integrity and increase productivity. Over the years, welding has been more of an art than a science, but in the last few decades major advances have taken place in welding science and technology. With the development of new methodologies at the crossroads of basic and applied sciences, enormous opportunities and potential exist to develop a science-based tailoring of composition, structure, and properties of welds with intelligent control and automation of the welding processes.

David, S.A.; Vitek, J.M. [Oak Ridge National Lab., TN (United States); Babu, S.S.; DebRoy, T. [Pennsylvania State Univ., University Park, PA (United States)

1995-02-01T23:59:59.000Z

284

Nome Joint Utility Systems | Open Energy Information  

Open Energy Info (EERE)

Joint Utility Systems Joint Utility Systems Jump to: navigation, search Name Nome Joint Utility Systems Place Alaska Utility Id 13642 Utility Location Yes Ownership M NERC Location AK Operates Generating Plant Yes Activity Generation Yes Activity Transmission Yes References EIA Form EIA-861 Final Data File for 2010 - File1_a[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Utility Rate Schedules Grid-background.png Electrical Charge Residential Power Cost Equalization Average Rates Residential: $0.3600/kWh Commercial: $0.3310/kWh References ↑ "EIA Form EIA-861 Final Data File for 2010 - File1_a" Retrieved from "http://en.openei.org/w/index.php?title=Nome_Joint_Utility_Systems&oldid=411195

285

Climate Leaders Joint Venture | Open Energy Information  

Open Energy Info (EERE)

Leaders Joint Venture Leaders Joint Venture Jump to: navigation, search Name Climate Leaders' Joint Venture Place Dallas, Texas Product Tudor Investment and Camco International have partnered to create Climate Leaders' Joint Venture. They will have inital working capital of USD 10m, with Camco owning 60%. Coordinates 32.778155°, -96.795404° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":32.778155,"lon":-96.795404,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

286

ELEMENTS OF JOINT DESIGN FOR WELDING  

SciTech Connect

The design of joints which are to be fusion welded by any of the arc or gas processes is discussed. The designs are applicable to either manual or machine welding. (A.C.)

Koopman, K.H.

1958-06-01T23:59:59.000Z

287

Predictability of Seasonal Precipitation Using Joint Probabilities  

Science Conference Proceedings (OSTI)

This paper tests whether seasonal mean precipitation is predictable using a new method that estimates and analyzes joint probabilities. The new estimation method is to partition the globe into boxes, pool all data within the box to estimate a ...

M. Tugrul Yilmaz; Timothy DelSole

2010-04-01T23:59:59.000Z

288

The Joint Airport Weather Studies Project  

Science Conference Proceedings (OSTI)

The Joint Airport Weather Studies (JAWS) Project will investigate the microburst event, having 2–10 km spatial and 2–10 min temporal scales, at Denver's Stapleton International Airport during the summer of 1982. JAWS applications and technology ...

John McCarthy; James W. Wilson; T. Theodore Fujita

1982-01-01T23:59:59.000Z

289

Combined Borehole Seismic and Electromagnetic Inversion For High-Resolution Petrophysical Assessment Of Hydocarbon Reservoirs  

Science Conference Proceedings (OSTI)

This report summarizes the work performed between January 2005 and December 2007, under DOE research contract DE-FC26-04NT15507. The project is was performed by the Center for Petroleum and Geosystems Engineering of The University of Texas at Austin and Lawrence Berkeley National Laboratory under the auspices of the National Energy Technology Office (NETL) and the Strategic Center for Natural Gas and Oil (SCNGO). During the three-year project, we developed new methods to combine borehole sonic and electromagnetic (EM) measurements for the improved assessment of elastic and petrophysical properties of rock formations penetrated by a well. Sonic measurements consisted of full waveform acoustic amplitudes acquired with monopole and dipole sources, whereas EM measurements consisted of frequency-domain voltages acquired with multi-coil induction systems. The combination of sonic and EM measurements permitted the joint estimation of elastic and petrophysical properties in the presence of mud-filtrate invasion. It was conclusively shown that the combined interpretation of sonic and EM measurements reduced non-uniqueness in the estimation of elastic and petrophysical properties and improved the spatial resolution of the estimations compared to estimations yielded separately from the two types of measurements. Moreover, this approach enabled the assessment of dynamic petrophysical properties such as permeability, as it incorporated the physics of mud-filtrate invasion in the interpretation of the measurements. The first part of the project considered the development of fast and reliable numerical algorithms to simulate borehole sonic waveforms in 2D, 3D, and radial 1D media. Such algorithms were subsequently used in the quantitative estimation of elastic properties jointly from borehole sonic and EM measurements. In the second part of the project we developed a new algorithm to estimate water saturation, porosity, and dry-rock elastic moduli jointly from borehole sonic and EM measurements. This algorithm assumed radial 1D variations of fluid saturation due to mud-filtrate invasion. Subsequently, we adapted the estimation method to interpret borehole field measurements acquired in both a shaly-sand sedimentary sequence and a tight-gas sandstone formation. In the two cases, we simulated the process of mud-filtrate invasion and concomitantly honored sonic and EM measurements. We produced reliable estimates of permeability and dry-rock moduli that were successfully validated with rock-core measurements. Finally, we introduced a new stochastic inversion procedure to estimate elastic, electrical, and petrophysical properties of layered media jointly from waveform sonic and frequency-domain EM measurements. The procedure was based on Bayesian statistical inversion and delivered estimates of uncertainty under various forms of a-priori information about the unknown properties. Tests on realistic synthetic models confirmed the reliability of this procedure to estimate elastic and petrophysical properties jointly from sonic and EM measurements. Several extended abstracts and conference presentations stemmed from this project, including 2 SEG extended abstracts, 1 SPE extended abstract, and 2 SPWLA extended abstracts. Some of these extended abstracts have been submitted for publication in peer-reviewed journals.

Carlos Torres-Verdin; G. Michael Hoversten; Ki Ha Lee; Gregory Newman; Kurt Nihei

2008-12-31T23:59:59.000Z

290

INTEGRATED APPROACH FOR THE PETROPHYSICAL INTERPRETATION OF POST-AND PRE-STACK 3-D SEISMIC DATA, WELL-LOG DATA, CORE DATA, GEOLOGICAL INFORMATION AND RESERVOIR PRODUCTION DATA VIA BAYESIAN STOCHASTIC INVERSION  

SciTech Connect

The present report summarizes the work carried out between September 30, 2000 and September 30, 2004 under DOE research contract No. DE-FC26-00BC15305. During the three-year project period, we carried out extensive studies on the inversion post-stack and pre-stack data together with well logs, petrophysical information and fluid flow data. We have achieved all the project goals including development of algorithm for joint inversion of pre-stack seismic data, well logs, and time records of fluid production measurements using stochastic inversion algorithms which were demonstrated on realistic synthetic and field data. Our accomplishments are: (1) Joint inversion of post-stack seismic, well log, fluid flow, and petrophysical data: we demonstrated the technique with application to data from the Gulf of Mexico. (2) Development of a robust pre-stack full waveform inversion algorithm: A new approach based on iteration-adaptive regularization that makes use of plane wave transformed seismic data, was developed and applied to OBC dataset from the Gulf of Thailand. The algorithm was also implemented on a cluster of personal computers. (3) Joint inversion of pre-stack seismic and well-log data: A new stochastic optimization algorithm that makes use of the essential features of seismic and well log data was developed and tested on realistic synthetic dataset. (4) Joint inversion of pre-stack seismic and fluid flow data: A novel technique was developed to optimally combine seismic and flow data. The technique makes very realistic estimate of porosity; sensitivity of the flow parameters to two disparate datasets was studied extensively. (5) Direct estimation of petrophysical parameters from seismic data: The pre-stack waveform inversion was modified to invert directly for porosity and saturation using the Biot-Gassmann equation at each iteration step. The final report contains abridged versions of some of our inventions. The works resulted in several peer-reviewed publications. Five papers have been communicated for peer-reviewed publication, and seven papers were presented at conferences. All of these publications and presentations stemmed from work directly related to the goals of our DOE project.

Carlos Torres-Verdin; Mrinal K. Sen

2004-09-01T23:59:59.000Z

291

New inversion methods for the Lorentz Integral Transform  

E-Print Network (OSTI)

The Lorentz Integral Transform approach allows microscopic calculations of electromagnetic reaction cross sections without explicit knowledge of final state wave functions. The necessary inversion of the transform has to be treated with great care, since it constitutes a so-called ill-posed problem. In this work new inversion techniques for the Lorentz Integral Transform are introduced. It is shown that they all contain a regularization scheme, which is necessary to overcome the ill-posed problem. In addition it is illustrated that the new techniques have a much broader range of application than the present standard inversion method of the Lorentz Integral Transform.

Diego Andreasi; Winfried Leidemann; Christoph Reiss; Michael Schwamb

2005-03-11T23:59:59.000Z

292

A simulation tool for the study of symmetric inversions in bacterial genomes  

Science Conference Proceedings (OSTI)

We present the tool SIB that simulates genomic inversions in bacterial chromosomes. The tool simulates symmetric inversions but allows the appearance of nonsymmetric inversions by simulating small syntenic blocks frequently observed on bacterial genome ...

Ulisses Dias; Zanoni Dias; João C. Setubal

2010-10-01T23:59:59.000Z

293

Fluid Imaging of Enhanced Geothermal Systems through Joint 3D Geophysical  

Open Energy Info (EERE)

Imaging of Enhanced Geothermal Systems through Joint 3D Geophysical Imaging of Enhanced Geothermal Systems through Joint 3D Geophysical Inverse Modeling Geothermal Lab Call Project Jump to: navigation, search Last modified on July 22, 2011. Project Title Fluid Imaging of Enhanced Geothermal Systems through Joint 3D Geophysical Inverse Modeling Project Type / Topic 1 Laboratory Call for Submission of Applications for Research, Development and Analysis of Geothermal Technologies Project Type / Topic 2 Fluid Imaging Project Description EGS has been defined as enhanced reservoirs that have been created to extract economical amounts of heat from low permeability and/or porosity geothermal resources. Critical to the success of EGS is the successful manipulation of fluids in the subsurface to enhance permeability. Knowledge in the change in volume and location of fluids in the rocks and fractures (both natural and induced) will be needed to manage injection strategies such as the number and location of step out wells, in-fill wells and the ratio of injection to production wells. The key difficulty in manipulating fluids has been our inability to reliably predict their locations, movements and concentrations. We believe combining data from MEQ and electrical surveys has the potential to overcome these problems and can meet many of the above needs, economically. Induced seismicity is currently viewed as one of the essential methods for inferring the success of creating fracture permeability and fluid paths during large scale EGS injections. Fluids are obviously playing a critical role in inducing the seismicity, however, other effects such as thermal, geochemical and stress redistribution, etc. may also play a role.

294

Joint sets that enhance production from Middle and  

E-Print Network (OSTI)

E&P NOTE Joint sets that enhance production from Middle and Upper Devonian gas shales joint sets (J1 and J2 sets) as observed in outcrop, core, and borehole images. These joints formed close thermal matura- tion of organic matter. When present together, earlier J1 joints are crosscut by later J2

Engelder, Terry

295

NRDC and Sierra Club Joint Petition November 14, 2011  

E-Print Network (OSTI)

1 NRDC and Sierra Club Joint Petition November 14, 2011 JOINT PETITION OF THE NATURAL RESOURCES the Natural Resources Defense Council (NRDC) and Sierra Club jointly file this petition to request;2 NRDC and Sierra Club Joint Petition November 14, 2011 SB 1368 was signed into law on September 29, 2006

296

On the inverse problem of entropy maximizations (Corresp.)  

Science Conference Proceedings (OSTI)

The inverse isoperimetric problem of the entropy functional is considered in this Correspondence. This problem can be stated as follows: Given a known probability density function (pdf), what prior constraints are needed in order for this pdf to be the ...

J. Noonan; N. Tzannes; T. Costello

1976-01-01T23:59:59.000Z

297

Modeling and inversion of self-potential data  

E-Print Network (OSTI)

This dissertation presents data processing techniques relevant to the acquisition, modeling, and inversion of self-potential data. The primary goal is to facilitate the interpretation of self-potentials in terms of the ...

Minsley, Burke J

2007-01-01T23:59:59.000Z

298

Inversion Breakup in Small Rocky Mountain and Alpine Basins  

Science Conference Proceedings (OSTI)

Comparisons are made between the postsunrise breakup of temperature inversions in two similar closed basins in very different climate settings, one in the eastern Alps and one in the Rocky Mountains. The small, high-altitude, limestone sinkholes ...

C. David Whiteman; Bernhard Pospichal; Stefan Eisenbach; Philipp Weihs; Craig B. Clements; Reinhold Steinacker; Erich Mursch-Radlgruber; Manfred Dorninger

2004-08-01T23:59:59.000Z

299

Inversion of Marine Radar Images for Surface Wave Analysis  

Science Conference Proceedings (OSTI)

A method to estimate sea surface elevation maps from marine radar image sequences is presented. This method is the extension of an existing inverse modeling technique to derive wave spectra from marine radar images, which assumes linear wave ...

JoséC. Nieto Borge; Germán RodrÍguez RodrÍguez; Katrin Hessner; Paloma Izquierdo González

2004-08-01T23:59:59.000Z

300

Global Datasets of Rooting Zone Depth Inferred from Inverse Methods  

Science Conference Proceedings (OSTI)

Two inverse methods are applied to a land surface model to infer global patterns of the hydrologically active depth of the vegetation's rooting zone. The first method is based on the assumption that vegetation is optimally adapted to its ...

Axel Kleidon

2004-07-01T23:59:59.000Z

Note: This page contains sample records for the topic "advanced joint inversion" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Integrated Forward Simulation and Inverse Design of Materials - TMS  

Science Conference Proceedings (OSTI)

Jul 18, 2007 ... Topic Title: Webcast: Integrated Forward Simulation and Inverse Design of ... Industry/University Cooperative Research Center for Computational ... (Materials Computation and Simulation Environment) project at PSU and the ...

302

Simulations of Trade Wind Cumuli under a Strong Inversion  

Science Conference Proceedings (OSTI)

The fifth intercomparison of the Global Water and Energy Experiment Cloud System Studies Working Group 1 is used as a vehicle for better understanding the dynamics of trade wind cumuli capped by a strong inversion. The basis of the ...

Bjorn Stevens; Andrew S. Ackerman; Bruce A. Albrecht; Andrew R. Brown; Andreas Chlond; Joan Cuxart; Peter G. Duynkerke; David C. Lewellen; Malcolm K. Macvean; Roel A. J. Neggers; Enrique Sánchez; A. Pier Siebesma; David E. Stevens

2001-07-01T23:59:59.000Z

303

Row-Action Inversion of the Barrick–Weber Equations  

Science Conference Proceedings (OSTI)

The Barrick–Weber equations describe the interaction of radar signals with the dynamic ocean surface, and so provide a mathematical basis for oceanic remote sensing. This report considers the inversion of these equations with several of the row-...

J. J. Green; L. R. Wyatt

2006-03-01T23:59:59.000Z

304

A Bernoulli Inverse Method for Determining the Ocean Circulation  

Science Conference Proceedings (OSTI)

A new inverse method for finding the large-scale ocean circulation is described. Unlike most previous methods it uses no horizontal gradient information, and is designed for widely spaced data. The method assumes that density, (linear) potential ...

Peter D. Killworth

1986-12-01T23:59:59.000Z

305

Forecasting Pacific SSTs: Linear Inverse Model Predictions of the PDO  

Science Conference Proceedings (OSTI)

A linear inverse model (LIM) is used to predict Pacific (30°S–60°N) sea surface temperature anomalies (SSTAs), including the Pacific decadal oscillation (PDO). The LIM is derived from the observed simultaneous and lagged covariance statistics of ...

Michael A. Alexander; Ludmila Matrosova; Cécile Penland; James D. Scott; Ping Chang

2008-01-01T23:59:59.000Z

306

Dynamical Adjustment of the Trade Wind Inversion Layer  

Science Conference Proceedings (OSTI)

In schematic north–south cross sections the trade inversion layer is often depicted as sloping upward as air flows toward the intertropical convergence zone. This conceptual view is consistent with purely thermodynamic boundary-layer models, ...

Wayne H. Schubert; Paul E. Ciesielski; Chungu Lu; Richard H. Johnson

1995-08-01T23:59:59.000Z

307

A Particle Filter for Inverse Lagrangian Prediction Problems  

Science Conference Proceedings (OSTI)

The authors present a numerical method for the inverse Lagrangian prediction problem, which addresses retrospective estimation of drifter trajectories through a turbulent flow, given their final positions and some knowledge of the flow field. Of ...

T. Mike Chin; Arthur J. Mariano

2010-02-01T23:59:59.000Z

308

Forward and inverse metabolic engineering strategies for improving polyhydroxybyrate production  

E-Print Network (OSTI)

Forward metabolic engineering (FME) is a rational approach to cellular engineering, relying on an understanding of the entire metabolic network to direct perturbations for phenotype improvement. Conversely, inverse metabolic ...

Tyo, Keith E. J

2008-01-01T23:59:59.000Z

309

Inverse Optimization: An Application to the Capacitated Plant Location Problem  

E-Print Network (OSTI)

Inverse optimization refers to the fact that each time a Lagrangean derived from a given mathematical programming problem is solved, it produces an optimal solution to some problem with a different right hand side. This ...

Bitran, Gabriel R.

310

The Inverse Ocean Modeling System. Part I: Implementation  

Science Conference Proceedings (OSTI)

The Inverse Ocean Modeling (IOM) system constructs and runs weak-constraint, four-dimensional variational data assimilation (W4DVAR) for any dynamical model and any observing array. The dynamics and the observing algorithms may be nonlinear but ...

A. F. Bennett; B. S. Chua; B. L. Pflaum; M. Erwig; Z. Fu; R. D. Loft; J. C. Muccino

2008-09-01T23:59:59.000Z

311

Bayesian inverse problems with Monte Carlo forward models  

E-Print Network (OSTI)

The full application of Bayesian inference to inverse problems requires exploration of a posterior distribution that typically does not possess a standard form. In this context, Markov chain Monte Carlo (MCMC) methods are ...

Bal, Guillaume

312

The Inverse Ocean Modeling System. Part II: Applications  

Science Conference Proceedings (OSTI)

The Inverse Ocean Modeling (IOM) System is a modular system for constructing and running weak-constraint four-dimensional variational data assimilation (W4DVAR) for any linear or nonlinear functionally smooth dynamical model and observing array. ...

J. C. Muccino; H. Luo; H. G. Arango; D. Haidvogel; J. C. Levin; A. F. Bennett; B. S. Chua; G. D. Egbert; B. D. Cornuelle; A. J. Miller; E. Di Lorenzo; A. M. Moore; E. D. Zaron

2008-09-01T23:59:59.000Z

313

Advanced Accessory Power Supply Topologies  

SciTech Connect

This Cooperative Research and Development Agreement (CRADA) began December 8, 2000 and ended September 30, 2009. The total funding provided by the Participant (General Motors Advanced Technology Vehicles [GM]) during the course of the CRADA totaled $1.2M enabling the Contractor (UT-Battelle, LLC [Oak Ridge National Laboratory, a.k.a. ORNL]) to contribute significantly to the joint project. The initial task was to work with GM on the feasibility of developing their conceptual approach of modifying major components of the existing traction inverter/drive to develop low cost, robust, accessory power. Two alternate methods for implementation were suggested by ORNL and both were proven successful through simulations and then extensive testing of prototypes designed and fabricated during the project. This validated the GM overall concept. Moreover, three joint U.S. patents were issued and subsequently licensed by GM. After successfully fulfilling the initial objective, the direction and duration of the CRADA was modified and GM provided funding for two additional tasks. The first new task was to provide the basic development for implementing a cascaded inverter technology into hybrid vehicles (including plug-in hybrid, fuel cell, and electric). The second new task was to continue the basic development for implementing inverter and converter topologies and new technology assessments for hybrid vehicle applications. Additionally, this task was to address the use of high temperature components in drive systems. Under this CRADA, ORNL conducted further research based on GM’s idea of using the motor magnetic core and windings to produce bidirectional accessory power supply that is nongalvanically coupled to the terminals of the high voltage dc-link battery of hybrid vehicles. In order not to interfere with the motor’s torque, ORNL suggested to use the zero-sequence, highfrequency harmonics carried by the main fundamental motor current for producing the accessory power. Two studies were conducted at ORNL. One was to put an additional winding in the motor slots to magnetically link with the high frequency of the controllable zero-sequence stator currents that do not produce any zero-sequence harmonic torques. The second approach was to utilize the corners of the square stator punching for the high-frequency transformers of the dc/dc inverter. Both approaches were successful. This CRADA validated the feasibility of GM’s desire to use the motor’s magnetic core and windings to produce bidirectional accessory power supply. Three joint U.S. patents with GM were issued to ORNL and GM by the U.S. Patent Office for the research results produced by this CRADA.

Marlino, L.D.

2010-06-15T23:59:59.000Z

314

Qualification of the Joints for ITER Central Solenoid  

SciTech Connect

The ITER Central Solenoid has 36 interpancake joints, 12 bus joints, and 12 feeder joints in the magnet. The joints are required to have resistance below 4 nOhm at 45 kA at 4.5 K. The US ITER Project Office developed two different types of interpancake joints with some variations in details in order to find a better design, qualify the joints, and establish a fabrication process. We built and tested four samples of the sintered joints and two samples with butt-bonded joints (a total of eight joints). Both designs met the specifications. Results of the joint development, test results, and selection of the baseline design are presented and discussed in the paper.

Martovetsky, Nicolai N [ORNL; Berryhill, Adam B [Cryomagnetics, Inc.; Kenney, Steven J [ORNL

2012-01-01T23:59:59.000Z

315

Nuclear fusion advances  

Science Conference Proceedings (OSTI)

The last decade has seen advances in the shaping and confinement of plasmas, and in approaches to noninductive current drive. Here, the author presents an overview of nuclear fusion advances between 1983-93 examining: fusion milestones; plasma shaping; ...

W. Sweet

1994-02-01T23:59:59.000Z

316

AdvAnced  

NLE Websites -- All DOE Office Websites (Extended Search)

AdvAnced test reActor At the InL advanced Unlike large, commercial power reactors, ATR is a low- temperature, low-pressure reactor. A nuclear reactor is basically an elaborate tool...

317

Joint spacing criterion for equivalent continuum model  

Science Conference Proceedings (OSTI)

Currently, the Yucca Mountain Site Characterization Project is investigating the feasibility of the disposal of high-level radioactive waste in the unsaturated Topopah Spring formation. The Topopah Spring formation is a heavily fractured, predominantly vertically jointed, welded tuff, and the potential disposal area is cut by the Ghost Dance fault and bounded by several other faults structures. The joints in the tuff and the faults may have an impact on the emplacement drift or borehole stability, as well as on the movement of fluids through the rock mass. The design of the repository drifts and layout, the waste emplacement scheme, and the thermomechanical performance of the rock mass will be analyzed using various numerical models. These models may be based on different assumptions regarding the representation of the fracture behavior under given applied stresses, and will range from discrete models where individual mechanically active fractures are treated distinctly, to continuum models where the joint behavior is smeared over a representative volume. There is always the question of applicability of a model with respect to a given material domain to be analyzed. For the mechanical analysis of the rock mass response around a repository drift, the applicability of an equivalent continuum model is dependent on the joint spacing in the rock mass. Considering the joint spacings that may be encountered at the potential repository site, a ratio of joint spacing to the planned drift diameter may be adopted as a criterion for evaluating the applicability of the Compliant Joint Model (CJM) in the Yucca Mountain Site Characterization Project. In this paper, this criterion is established by reviewing basic continuum concepts and numerical approximation implications used to build the CJM and by examining rock mass conditions that may be encountered at the potential Yucca Mountain repository site.

Tsai, F.C.

1995-12-31T23:59:59.000Z

318

Maps and inverse maps in open quantum dynamics  

Science Conference Proceedings (OSTI)

Two kinds of maps that describe evolution of states of a subsystem coming from dynamics described by a unitary operator for a larger system, maps defined for fixed mean values and maps defined for fixed correlations, are found to be quite different for the same unitary dynamics in the same situation in the larger system. An affine form is used for both kinds of maps to find necessary and sufficient conditions for inverse maps. All the different maps with the same homogeneous part in their affine forms have inverses if and only if the homogeneous part does. Some of these maps are completely positive; others are not, but the homogeneous part is always completely positive. The conditions for an inverse are the same for maps that are not completely positive as for maps that are. For maps defined for fixed mean values, the homogeneous part depends only on the unitary operator for the dynamics of the larger system, not on any state or mean values or correlations. Necessary and sufficient conditions for an inverse are stated several different ways: in terms of the maps of matrices, basis matrices, density matrices, or mean values. The inverse maps are generally not tied to the dynamics the way the maps forward are. A trace-preserving completely positive map that is unital cannot have an inverse that is obtained from any dynamics described by any unitary operator for any states of a larger system.

Jordan, Thomas F., E-mail: tjordan@d.umn.ed [Physics Department, University of Minnesota, Duluth, MN 55812 (United States)

2010-10-15T23:59:59.000Z

319

Passive Plant Natural Circulation BWR Core Studies: Joint EPRI/CRIEPI Advanced LWR Studies: Joint EPRI/CRIEPI Advanced LWR Studies  

Science Conference Proceedings (OSTI)

This report summarizes a study to optimize the core and fuel design for a natural circulation BWR with passive safety features and to establish the feasible range of power level which can be practically achieved under natural circulation conditions using optimized design parameters.Detailed core and fuel, natural circulation flow, loss-of-coolant, and transient analyses support the feasibility of natural circulation BWRs with electrical output in excess of 1000 MWe.

1991-05-15T23:59:59.000Z

320

ADVANCED DATA SECURITY  

Science Conference Proceedings (OSTI)

ADVANCED DATA SECURITY. NVLAP Lab Code: 200968-0. Address and Contact Information: 1933 O'Toole Avenue San ...

2013-11-08T23:59:59.000Z

Note: This page contains sample records for the topic "advanced joint inversion" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Fatigue of Advanced Materials  

Science Conference Proceedings (OSTI)

Oct 19, 2011... isolate the internal components from the external environment while ... overall thermal efficiency of advanced internal combustion engines ...

322

Advancement of Electrochromic Windows  

E-Print Network (OSTI)

advanced spectrally selective low-e double-pane windows and the same type of daylighting control system

2006-01-01T23:59:59.000Z

323

Advanced High Frequency Devices  

Science Conference Proceedings (OSTI)

... External agencies, including the Defense Advanced Research Projects Agency (DARPA) and the Office of Naval Research (ONR), have ...

2010-10-05T23:59:59.000Z

324

Supporting Advanced Communications Networks  

Science Conference Proceedings (OSTI)

... it will rely on revolutionary advances in network architecture. ... telemedicine), sensor and control networks (eg, Smart Grid, environmental monitoring ...

2012-02-13T23:59:59.000Z

325

Qualification of the Joints for the ITER Central Solenoid  

SciTech Connect

The ITER Central Solenoid has 36 interpancake joints, 12 bus joints, and 12 feeder joints in the magnet. The joints are required to have resistance below 4 nOhm at 45 kA at 4.5 K. The US ITER Project Office developed two different types of interpancake joints with some variations in details in order to find a better design, qualify the joints, and establish a fabrication process. We built and tested four samples of the sintered joints and two samples with butt-bonded joints (a total of eight joints). Both designs met the specifications. Results of the joint development, test results, and selection of the baseline design are presented and discussed in the paper. The ITER Central Solenoid (CS) consists of six modules. Each module is composed of six wound hexapancakes and one quadrapancake. The multipancakes are connected electrically and hydraulically by in-line interpancake joints. The joints are located at the outside diameter (OD) of the module. Cable in conduit conductor (CICC) high-current joints are critical elements in the CICC magnets. In addition to low resistivity, the CS joints must fit a space envelope equivalent to the regular conductor cross section and must have low hydraulic impedance and enough structural strength to withstand the hoop and compressive forces during operation, including cycling. This paper is the continuation of the work reported on the intermodule joints.

Martovetsky, N; Berryhill, A; Kenney, S

2011-09-01T23:59:59.000Z

326

Handbook on dynamics of jointed structures.  

Science Conference Proceedings (OSTI)

The problem of understanding and modeling the complicated physics underlying the action and response of the interfaces in typical structures under dynamic loading conditions has occupied researchers for many decades. This handbook presents an integrated approach to the goal of dynamic modeling of typical jointed structures, beginning with a mathematical assessment of experimental or simulation data, development of constitutive models to account for load histories to deformation, establishment of kinematic models coupling to the continuum models, and application of finite element analysis leading to dynamic structural simulation. In addition, formulations are discussed to mitigate the very short simulation time steps that appear to be required in numerical simulation for problems such as this. This handbook satisfies the commitment to DOE that Sandia will develop the technical content and write a Joints Handbook. The content will include: (1) Methods for characterizing the nonlinear stiffness and energy dissipation for typical joints used in mechanical systems and components. (2) The methodology will include practical guidance on experiments, and reduced order models that can be used to characterize joint behavior. (3) Examples for typical bolted and screw joints will be provided.

Ames, Nicoli M.; Lauffer, James P.; Jew, Michael D.; Segalman, Daniel Joseph; Gregory, Danny Lynn; Starr, Michael James; Resor, Brian Ray

2009-07-01T23:59:59.000Z

327

Advanced Manufacturing Office: Better Plants  

NLE Websites -- All DOE Office Websites (Extended Search)

Better Plants on Twitter Bookmark Advanced Manufacturing Office: Better Plants on Google Bookmark Advanced Manufacturing Office: Better Plants on Delicious Rank Advanced...

328

Advanced Manufacturing Office: Pump Systems  

NLE Websites -- All DOE Office Websites (Extended Search)

Pump Systems on Twitter Bookmark Advanced Manufacturing Office: Pump Systems on Google Bookmark Advanced Manufacturing Office: Pump Systems on Delicious Rank Advanced...

329

Session: CSP Advanced Systems -- Advanced Overview (Presentation)  

DOE Green Energy (OSTI)

The project description is: (1) it supports crosscutting activities, e.g. advanced optical materials, that aren't tied to a single CSP technology and (2) it supports the 'incubation' of new concepts in preliminary stages of investigation.

Mehos, M.

2008-04-01T23:59:59.000Z

330

Order and disorder in columnar joints  

E-Print Network (OSTI)

Columnar joints are three-dimensional fracture networks that form in cooling basalt and several other media. The network organizes itself into ordered, mostly hexagonal columns. The same pattern can be observed on a smaller scale in desiccating starch. We show how surface boundary conditions in the desiccation of starch affect the formation of columnar joints. Under constant drying power conditions, we find a power law dependence of columnar cross-sectional area with depth, while under constant drying rate conditions this coarsening is eventually halted. Discontinuous transitions in pattern scale can be observed under constant external conditions, which may prompt a reinterpretation of similar transitions found in basalt. Starch patterns are statistically similar to those found in basalt, suggesting that mature columnar jointing patterns contain inherent residual disorder, but are statistically scale invariant.

Lucas Goehring; Stephen W. Morris

2005-01-03T23:59:59.000Z

331

Energy Department Requests Proposals for Advanced Scientific Computing  

Office of Science (SC) Website

Energy Energy Department Requests Proposals for Advanced Scientific Computing Research News Featured Articles Science Headlines 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 Presentations & Testimony News Archives Contact Information Office of Science U.S. Department of Energy 1000 Independence Ave., SW Washington, DC 20585 P: (202) 586-5430 12.27.05 Energy Department Requests Proposals for Advanced Scientific Computing Research Print Text Size: A A A Subscribe FeedbackShare Page WASHINGTON, DC - The Department of Energy's Office of Science and the National Nuclear Security Administration (NNSA) have issued a joint Request for Proposals for advanced scientific computing research. DOE expects to fund $67 million annually for three years to five years under its Scientific Discovery through Advanced Computing (SciDAC) research program.'

332

R. Shane Johnson, Associate Director Office of Advanced Nuclear Research  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Advanced Nuclear Research Advanced Nuclear Research September 30, 2002 Generation IV International Forum Generation IV International Forum Presentation to the Nuclear Energy Research Advisory Committee Office of Nuclear Energy, Science and Technology Generation IV International Forum Generation IV International Forum 6 Government-sanctioned organization working together to plan the future of nuclear energy * Chartered in July 2002 * Conduct joint R&D on next-generation nuclear energy systems * Voluntary member participation in specific projects 6 Observer Organizations * OECD-NEA * IAEA * Euratom South Korea U.S.A. Argentina Brazil Canada France Japan South Africa United Kingdom Switzerland Office of Nuclear Energy, Science and Technology

333

Friction Stir Spot Welding of Advanced High Strength Steels  

Science Conference Proceedings (OSTI)

Friction stir spot welding techniques were developed to successfully join several advanced high strength steels. Two distinct tool materials were evaluated to determine the effect of tool materials on the process parameters and joint properties. Welds were characterized primarily via lap shear, microhardness, and optical microscopy. Friction stir spot welds were compared to the resistance spot welds in similar strength alloys by using the AWS standard for resistance spot welding high strength steels. As further comparison, a primitive cost comparison between the two joining processes was developed, which included an evaluation of the future cost prospects of friction stir spot welding in advanced high strength steels.

Hovanski, Yuri; Grant, Glenn J.; Santella, M. L.

2009-11-13T23:59:59.000Z

334

DOE Joint Genome Institute 2008 Progress Report  

Science Conference Proceedings (OSTI)

While initially a virtual institute, the driving force behind the creation of the DOE Joint Genome Institute in Walnut Creek, California in the Fall of 1999 was the Department of Energy's commitment to sequencing the human genome. With the publication in 2004 of a trio of manuscripts describing the finished 'DOE Human Chromosomes', the Institute successfully completed its human genome mission. In the time between the creation of the Department of Energy Joint Genome Institute (DOE JGI) and completion of the Human Genome Project, sequencing and its role in biology spread to fields extending far beyond what could be imagined when the Human Genome Project first began. Accordingly, the targets of the DOE JGI's sequencing activities changed, moving from a single human genome to the genomes of large numbers of microbes, plants, and other organisms, and the community of users of DOE JGI data similarly expanded and diversified. Transitioning into operating as a user facility, the DOE JGI modeled itself after other DOE user facilities, such as synchrotron light sources and supercomputer facilities, empowering the science of large numbers of investigators working in areas of relevance to energy and the environment. The JGI's approach to being a user facility is based on the concept that by focusing state-of-the-art sequencing and analysis capabilities on the best peer-reviewed ideas drawn from a broad community of scientists, the DOE JGI will effectively encourage creative approaches to DOE mission areas and produce important science. This clearly has occurred, only partially reflected in the fact that the DOE JGI has played a major role in more than 45 papers published in just the past three years alone in Nature and Science. The involvement of a large and engaged community of users working on important problems has helped maximize the impact of JGI science. A seismic technological change is presently underway at the JGI. The Sanger capillary-based sequencing process that dominated how sequencing was done in the last decade is being replaced by a variety of new processes and sequencing instruments. The JGI, with an increasing number of next-generation sequencers, whose throughput is 100- to 1,000-fold greater than the Sanger capillary-based sequencers, is increasingly focused in new directions on projects of scale and complexity not previously attempted. These new directions for the JGI come, in part, from the 2008 National Research Council report on the goals of the National Plant Genome Initiative as well as the 2007 National Research Council report on the New Science of Metagenomics. Both reports outline a crucial need for systematic large-scale surveys of the plant and microbial components of the biosphere as well as an increasing need for large-scale analysis capabilities to meet the challenge of converting sequence data into knowledge. The JGI is extensively discussed in both reports as vital to progress in these fields of major national interest. JGI's future plan for plants and microbes includes a systematic approach for investigation of these organisms at a scale requiring the special capabilities of the JGI to generate, manage, and analyze the datasets. JGI will generate and provide not only community access to these plant and microbial datasets, but also the tools for analyzing them. These activities will produce essential knowledge that will be needed if we are to be able to respond to the world's energy and environmental challenges. As the JGI Plant and Microbial programs advance, the JGI as a user facility is also evolving. The Institute has been highly successful in bending its technical and analytical skills to help users solve large complex problems of major importance, and that effort will continue unabated. The JGI will increasingly move from a central focus on 'one-off' user projects coming from small user communities to much larger scale projects driven by systematic and problem-focused approaches to selection of sequencing targets. Entire communities of scientists working in a particular field, such as feeds

Gilbert, David

2009-03-12T23:59:59.000Z

335

Delivery Massager: A tool for propagating seismic inversion information into reservoir models  

Science Conference Proceedings (OSTI)

We introduce a new open-source program for transforming inversion data from the open-source Delivery seismic inversion software to industry-standard cornerpoint grid formats suitable for reservoir modelling and flow simulations. The seismic inversion ... Keywords: Bayesian, Cornerpoint grid, Downscaling, Geostatistics, Inversion, Open-source, Seismic, Shared earth model, Stochastic

James Gunning; Michael E. Glinsky; Chris White

2007-05-01T23:59:59.000Z

336

Advanced Manufacturing Office: Technical Assistance  

NLE Websites -- All DOE Office Websites (Extended Search)

Assistance on Twitter Bookmark Advanced Manufacturing Office: Technical Assistance on Google Bookmark Advanced Manufacturing Office: Technical Assistance on Delicious Rank...

337

Advanced Manufacturing Office: Financial Opportunities  

NLE Websites -- All DOE Office Websites (Extended Search)

on Twitter Bookmark Advanced Manufacturing Office: Financial Opportunities on Google Bookmark Advanced Manufacturing Office: Financial Opportunities on Delicious Rank...

338

Pacific Northwest National Laboratory The Joint Global Change  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Pacific Northwest Pacific Northwest National Laboratory The Joint Global Change The Joint Global Change Research Institute Research Institute Nuclear Power and Stabilizing CO 2 Concentrations Jae Edmonds and Sonny Kim Nuclear Energy Research Advisory Committee Meeting April 15 and 16, 2002 Alexandria, VA Pacific Northwest National Laboratory 2 The Joint Global Change The Joint Global Change Research Institute Research Institute CLIMATE CHANGE Pacific Northwest National Laboratory 3 The Joint Global Change The Joint Global Change Research Institute Research Institute CLIMATE CHANGE Multiple gases * CO 2 (fossil fuel, land-use) * CH 4 (rice paddies, ruminant livestock, landfills, coal mining, oil and gas production, incomplete combustion) * N 2 O (nitrogen fertilizers, industrial processes, other??)

339

Adaptive Core Simulation Employing Discrete Inverse Theory - Part I: Theory  

Science Conference Proceedings (OSTI)

Technical Paper / Advances in Nuclear Fuel Management - Core Physics and Fuel Management Methods, Analytical Tools, and Benchmarks

Hany S. Abdel-Khalik; Paul J. Turinsky

340

Joint unsupervised structure discovery and information extraction  

Science Conference Proceedings (OSTI)

In this paper we present JUDIE (Joint Unsupervised Structure Discovery and Information Extraction), a new method for automatically extracting semi-structured data records in the form of continuous text (e.g., bibliographic citations, postal addresses, ... Keywords: data management, information extraction, text segmentation

Eli Cortez; Daniel Oliveira; Altigran S. da Silva; Edleno S. de Moura; Alberto H.F. Laender

2011-06-01T23:59:59.000Z

Note: This page contains sample records for the topic "advanced joint inversion" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Applications of explosion-welded transition joints  

SciTech Connect

Explosion welding is presented as an alternate process of joining dissimilar metals. The process is compared with brazing, the most appropriate process for comparison, and the bond zone obtained through explosion welding is characterized. Several applications are described where transition joints were made from explosion-bonded dissimilar-metal combinations for subsequent assembly through fusion welding.

Popoff, A.A.; Casey, H.

1977-01-01T23:59:59.000Z

342

Joint with application in electrochemical devices  

DOE Patents (OSTI)

A joint for use in electrochemical devices, such as solid oxide fuel cells (SOFCs), oxygen separators, and hydrogen separators, that will maintain a hermetic seal at operating temperatures of greater than 600.degree. C., despite repeated thermal cycling excess of 600.degree. C. in a hostile operating environment where one side of the joint is continuously exposed to an oxidizing atmosphere and the other side is continuously exposed to a wet reducing gas. The joint is formed of a metal part, a ceramic part, and a flexible gasket. The flexible gasket is metal, but is thinner and more flexible than the metal part. As the joint is heated and cooled, the flexible gasket is configured to flex in response to changes in the relative size of the metal part and the ceramic part brought about by differences in the coefficient of thermal expansion of the metal part and the ceramic part, such that substantially all of the tension created by the differences in the expansion and contraction of the ceramic and metal parts is absorbed and dissipated by flexing the flexible gasket.

Weil, K Scott [Richland, WA; Hardy, John S [Richland, WA

2010-09-14T23:59:59.000Z

343

Temperbead Qualification: Joint P3 Weld Qualification  

Science Conference Proceedings (OSTI)

This report outlines the procedure qualification for a new temperbead weld repair. After an initial failed qualification, the EPRI Repair and Replacement Applications Center (RRAC) teamed with Calvert Cliffs Nuclear Power Plant to perform a joint procedure qualification and, in doing so, assisted the industry by enabling general use of the new weld procedure.

2002-12-29T23:59:59.000Z

344

Joint resummation for heavy quark production  

E-Print Network (OSTI)

We present joint threshold and recoil resummed transverse momentum distributions for heavy quark hadroproduction, at next-to-leading logarithmic accuracy. We study the dependence of these distributions on the production channel, the color configurations and the differences with the pure threshold-resummed distribution.

Andrea Banfi; Eric Laenen

2004-11-18T23:59:59.000Z

345

The Joint Center for Satellite Data Assimilation  

Science Conference Proceedings (OSTI)

The Joint Center for Satellite Data Assimilation (JCSDA) was established by NASA and NOAA in 2001, with Department of Defense (DoD) agencies becoming partners in 2002. The goal of JCSDA is to accelerate the use of observations from Earth-orbiting ...

John Le Marshall; Louis Uccellini; Franco Einaudi; Lars-Peters Riishojgaard; Marie Colton; Fuzhong Weng; James G. Yoe; Simon Chang; Patricia Phoebus; Michael Uhart; Stephen Lord

2007-03-01T23:59:59.000Z

346

Jointly organised by HKU CIVIL ENGRG. DEPT.  

E-Print Network (OSTI)

SEMINAR Jointly organised by and HKU CIVIL ENGRG. DEPT. Centre for Infrastructure and Construction men first walked on the moon yet, in this age of rapid technological development, we persist in undertaking the task of installing and maintaining our underground utility services using what is essentially

Tam, Vincent W. L.

347

Joint Distributions for Interacting Fluid Queues  

Science Conference Proceedings (OSTI)

Motivated by recent traffic control models in ATM systems, we analyse three closely related systems of fluid queues, each consisting of two consecutive reservoirs, in which the first reservoir is fed by a two-state (on and off) Markov source. The first ... Keywords: feedback, fluid queue, joint distribution, stationary distribution, tandem queue, traffic shaper

Dirk P. Kroese; Werner R. W. Scheinhardt

2001-03-01T23:59:59.000Z

348

A Target-Oriented Magnetotelluric Inversion Approach For Characterizing The  

Open Energy Info (EERE)

Target-Oriented Magnetotelluric Inversion Approach For Characterizing The Target-Oriented Magnetotelluric Inversion Approach For Characterizing The Low Enthalpy Gross Schonebeck Geothermal Reservoir Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Journal Article: A Target-Oriented Magnetotelluric Inversion Approach For Characterizing The Low Enthalpy Gross Schonebeck Geothermal Reservoir Details Activities (0) Areas (0) Regions (0) Abstract: Electrical conductivity is a key parameter for the exploration and characterization of geothermal reservoirs as hot mineralized formation water of active geothermal areas usually exhibits significantly higher conductivity than the surrounding host rock. Here we present results of a magnetotelluric (MT) exploration experiment carried out in the vicinity of the Gross Schonebeck geothermal test site in Northern Germany, where a

349

Development of inverse modeling techniques for geothermal applications  

DOE Green Energy (OSTI)

We have developed inverse modeling capabilities for the non-isothermal, multiphase, multicomponent numerical simulator TOUGH2 to facilitate automatic history matching and parameter estimation based on data obtained during testing and exploitation of geothermal fields. The TOUGH2 code allows one to estimate TOUGH2 input parameters based on any type of observation for which a corresponding simulation output can be calculated. In addition, a detailed residual and error analysis is performed, and the uncertainty of model predictions can be evaluated. One of the advantages of inverse modeling is that it overcomes the time and labor intensive tedium of trial- and error model calibration. Furthermore, the estimated parameters refer directly to the numerical model used for the subsequent predictions and optimization studies. This paper describes the methodology of inverse modeling and demonstrates an application of the method to data from a synthetic geothermal reservoir. We also illustrate its use for the optimization of fluid reinjection into a partly depleted reservoir.

Finsterle, S.; Pruess, K.

1997-03-01T23:59:59.000Z

350

DOE and NYSERDA Join in $7.1 Million Program to Demonstrate Advanced  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

DOE and NYSERDA Join in $7.1 Million Program to Demonstrate DOE and NYSERDA Join in $7.1 Million Program to Demonstrate Advanced Electric Energy Storage Devices DOE and NYSERDA Join in $7.1 Million Program to Demonstrate Advanced Electric Energy Storage Devices Two major energy storage projects to demonstrate advanced electric energy storage devices in New York State have been selected as part of a joint initiative between the Department of Energy's (DOE) Energy Storage Research Program and the New York State Energy Research and Development Authority(NYSERDA). DOE and NYSERDA Join in $7.1 Million Program to Demonstrate Advanced Electric Energy Storage Devices More Documents & Publications Projects Selected for Funding Under the Joint NYSERDA / DOE Energy Storage Initiative Energy Storage Systems 2007 Peer Review - Utility & Commercial Applications

351

Advanced Concepts Breakout Group  

NLE Websites -- All DOE Office Websites (Extended Search)

Workshop Workshop Advanced Concepts Working Group Facilitator: John J. Petrovic Scribe: Sherry Marin Advanced Storage Techniques/ Approaches in Priority Order 1. Crystalline Nanoporous Materials (15) 2. Polymer Microspheres (12) Self-Assembled Nanocomposites (12) 3. Advanced Hydrides (11) Metals - Organic (11) 4. BN Nanotubes (5) Hydrogenated Amorphous Carbon (5) 5. Mesoporous materials (4) Bulk Amorphous Materials (BAMs) (4) 6. Iron Hydrolysis (3) 7. Nanosize powders (2) 8. Metallic Hydrogen (1) Hydride Alcoholysis (1) Overarching R&D Questions for All Advanced Materials * Maximum storage capacity - theoretical model * Energy balance / life cycle analysis * Hydrogen absorption / desorption kinetics * Preliminary cost analysis - potential for low cost, high

352

Advanced Materials | ORNL  

NLE Websites -- All DOE Office Websites (Extended Search)

Research Areas Research Areas Research Highlights Facilities and Capabilities Science to Energy Solutions News & Awards Events and Conferences Supporting Organizations Directionally Solidified Materials Using high-temperature optical floating zone furnace to produce monocrystalline molybdenum alloy micro-pillars Home | Science & Discovery | Advanced Materials Advanced Materials | Advanced Materials SHARE ORNL has the nation's most comprehensive materials research program and is a world leader in research that supports the development of advanced materials for energy generation, storage, and use. We have core strengths in three main areas: materials synthesis, characterization, and theory. In other words, we discover and make new materials, we study their structure,

353

Advanced Research Materials Program  

NLE Websites -- All DOE Office Websites (Extended Search)

materials requirements for all fossil energy systems, including materials for advanced power generation and coal fuels technologies. Examples of these technologies include coal...

354

Project: Advanced Fire Detection  

Science Conference Proceedings (OSTI)

... residential fire deaths through development of measurement ... Beyond advances in sensing technologies, a key ... data will be used to develop and test ...

2013-05-30T23:59:59.000Z

355

advance meeting brochure  

Science Conference Proceedings (OSTI)

May 23, 1999 ... Ponte Vedra Beach, Florida, USA. ADVANCE PROGRAM ..... but she has two enclosed glass-sided decks, an out- side balcony and the ...

356

Brochures | Advanced Photon Source  

NLE Websites -- All DOE Office Websites (Extended Search)

Podcasts Image Gallery external site Video Library Syndicated Feeds (RSS) The Advanced Photon Source: Lighting the Way to a Better Tomorrow aps brochure The APS helps...

357

Divisions | Advanced Photon Source  

NLE Websites -- All DOE Office Websites (Extended Search)

Chart Argonne Research Divisions APS Research Divisions In May 2002, The Advanced Photon Source was reorganized into three divisions: the Accelerator Systems Division...

358

Advanced Mixing Models  

Propose mixing indicators. Turbulence kinetic energy ... (Turbulence intensity observed at Point 8 in Tank B & C) Advanced Mixing Models. Computational Sciences. 13.

359

Advancement in Battery Materials  

Science Conference Proceedings (OSTI)

Oct 18, 2010 ... Advanced Electrochemical Storage for Renewable Integration and Utility Applications: Zhenguo "Gary" Yang1; Dawon Choi1; Gordon Graff1; ...

360

OpenADR Advances  

NLE Websites -- All DOE Office Websites (Extended Search)

Volume 54 Issue 11 Date Published 112012 Keywords communication and standards, openadr, smart grid Abstract An important goal for the advancement of smart grid deployments is to...

Note: This page contains sample records for the topic "advanced joint inversion" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

DOE Advanced Protection Project  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Task 3 - Advanced Protection - Evaluate measures - 2009 - Design, model Irvine Smart Grid Demo protection system - 2010 6 Copyright 2010, Southern California Edison Task 1 -...

362

Stochastic spectral methods for efficient Bayesian solution of inverse problems  

SciTech Connect

We present a reformulation of the Bayesian approach to inverse problems, that seeks to accelerate Bayesian inference by using polynomial chaos (PC) expansions to represent random variables. Evaluation of integrals over the unknown parameter space is recast, more efficiently, as Monte Carlo sampling of the random variables underlying the PC expansion. We evaluate the utility of this technique on a transient diffusion problem arising in contaminant source inversion. The accuracy of posterior estimates is examined with respect to the order of the PC representation, the choice of PC basis, and the decomposition of the support of the prior. The computational cost of the new scheme shows significant gains over direct sampling.

Marzouk, Youssef M. [Sandia National Laboratories, Livermore, CA 94551 (United States)]. E-mail: ymarz@alum.mit.edu; Najm, Habib N. [Sandia National Laboratories, Livermore, CA 94551 (United States)]. E-mail: hnnajm@sandia.gov; Rahn, Larry A. [Sandia National Laboratories, Livermore, CA 94551 (United States)]. E-mail: rahn@sandia.gov

2007-06-10T23:59:59.000Z

363

Stochastic spectral methods for efficient Bayesian solution of inverse problems.  

SciTech Connect

We present a reformulation of the Bayesian approach to inverse problems, that seeks to accelerate Bayesian inference by using polynomial chaos (PC) expansions to represent random variables. Evaluation of integrals over the unknown parameter space is recast, more efficiently, as Monte Carlo sampling of the random variables underlying the PC expansion. We evaluate the utility of this technique on a transient diffusion problem arising in contaminant source inversion. The accuracy of posterior estimates is examined with respect to the order of the PC representation, the choice of PC basis, and the decomposition of the support of the prior. The computational cost of the new scheme shows significant gains over direct sampling.

Marzouk, Youssef M.; Najm, Habib N.; Rahn, Larry A.

2005-08-01T23:59:59.000Z

364

Variation in joint fluid composition and its effect on the tribology of replacement joint articulation  

E-Print Network (OSTI)

Polyethylene wear is a significant clinical problem limiting the long-term survival of joint replacement prostheses, particularly in total hip arthroplasty (THA) and total knee arthroplasty (TKA). Although the tribology ...

Mazzucco, Daniel Clarke, 1976-

2003-01-01T23:59:59.000Z

365

Addressing the Need for Alternative Transportation Fuels: The Joint BioEnergy Institute  

E-Print Network (OSTI)

Fuels: The Joint BioEnergy Institute Harvey W. Blanch †,‡,§,¶, * † Joint BioEnergy Institute, ‡ Department of Chemicalbiomass monomers. The Joint BioEnergy Institute (JBEI) is a

Blanch, Harvey

2010-01-01T23:59:59.000Z

366

PP-82-3 The Joint Owners of the Highgate Interconnection Facilities...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

3 The Joint Owners of the Highgate Interconnection Facilities PP-82-3 The Joint Owners of the Highgate Interconnection Facilities Presidential Permit authorizing The Joint Owners...

367

Fuel Cell Technologies Office: Joint Fuel Cell Bus Workshop  

NLE Websites -- All DOE Office Websites (Extended Search)

Joint Fuel Cell Bus Joint Fuel Cell Bus Workshop to someone by E-mail Share Fuel Cell Technologies Office: Joint Fuel Cell Bus Workshop on Facebook Tweet about Fuel Cell Technologies Office: Joint Fuel Cell Bus Workshop on Twitter Bookmark Fuel Cell Technologies Office: Joint Fuel Cell Bus Workshop on Google Bookmark Fuel Cell Technologies Office: Joint Fuel Cell Bus Workshop on Delicious Rank Fuel Cell Technologies Office: Joint Fuel Cell Bus Workshop on Digg Find More places to share Fuel Cell Technologies Office: Joint Fuel Cell Bus Workshop on AddThis.com... Publications Program Publications Technical Publications Educational Publications Newsletter Program Presentations Multimedia Conferences & Meetings Annual Merit Review Proceedings Workshop & Meeting Proceedings Webinars

368

Evaluation of Pipe-Type Cable Joint Restraint Systems  

Science Conference Proceedings (OSTI)

Joints in underground transmission pipe-type cables must be designed to accommodate the thermomechanical forces created as a cable heats and cools in operation. This report details an investigation of several joint restraining designs and recommends one design.

1990-04-06T23:59:59.000Z

369

Electric Vehicle Preparedness - Task 2: Identification of Joint...  

NLE Websites -- All DOE Office Websites (Extended Search)

PROGRAM Electric Vehicle Preparedness Task 2: Identification of Joint Base Lewis McChord Vehicles for Installation of Data Loggers June 2013 Prepared for: Joint Base Lewis McChord...

370

ORISE: Providing Support to the DOE Joint Information Center  

NLE Websites -- All DOE Office Websites (Extended Search)

ORISE Provides Support to DOE's Oak Ridge Office Joint Information Center (JIC) In the event of an emergency, the U.S. Department of Energy (DOE) Oak Ridge Office (ORO) Joint...

371

YAKIMA BASIN JOINT BOARD A Partnership of Public Entities Promoting  

E-Print Network (OSTI)

YAKIMA BASIN JOINT BOARD A Partnership of Public Entities Promoting the Multiple Uses of the Yakima for the opportunity to comment. Sincerely, Jim Trull, President Yakima Basin Joint Board #12;

372

Dual position locking joint design for a medical walker  

E-Print Network (OSTI)

In this thesis we analyzed a joint created for a medical walker currently in the prototyping stage of development. The walker is designed to help a user stand up from a seated position. The joint holds two legs of the ...

Beecher, Eric M

2010-01-01T23:59:59.000Z

373

Joint Center for Energy Storage Research | Argonne National Laboratory  

NLE Websites -- All DOE Office Websites (Extended Search)

Joint Center for Energy Storage Research Share Description The Joint Center for Energy Storage Research (JCESR) is a major public-private research partnership that integrates U.S....

374

NIST, NASA Launch Joint Effort to Develop New Climate ...  

Science Conference Proceedings (OSTI)

NIST, NASA Launch Joint Effort to Develop New Climate Satellites. For ... space. The balance between them affects the climate. ...

2010-10-05T23:59:59.000Z

375

Joint Quantum Institute Created by University of Maryland ...  

Science Conference Proceedings (OSTI)

... establishing the Joint Quantum Institute at the University of Maryland, College Park. Credit: Thai Nguyen, University of Maryland. ...

2012-02-29T23:59:59.000Z

376

Microbial Genomics Data from the DOE Joint Genome Institute (JGI)  

DOE Data Explorer (OSTI)

As of March 2008, The Joint Genome Institute has released 296 Prokaryotic microbial sites, with 216 in finished status.

377

Kansas Advanced Semiconductor Project  

SciTech Connect

KASP (Kansas Advanced Semiconductor Project) completed the new Layer 0 upgrade for D0, assumed key electronics projects for the US CMS project, finished important new physics measurements with the D0 experiment at Fermilab, made substantial contributions to detector studies for the proposed e+e- international linear collider (ILC), and advanced key initiatives in non-accelerator-based neutrino physics.

Baringer, P.; Bean, A.; Bolton, T.; Horton-Smith, G.; Maravin, Y.; Ratra, B.; Stanton, N.; von Toerne, E.; Wilson, G.

2007-09-21T23:59:59.000Z

378

Advanced Turbine Systems Program and coal applications  

Science Conference Proceedings (OSTI)

The US Department of Energy (DOE) is conducting a program to develop ultra high-efficiency, cost-effective, environmentally benign gas turbine systems for industrial and utility applications. The Advanced Turbine Systems (ATS) Program, jointly managed by the DOE's Office of Fossil Energy (DOE/FE) and Office of Conservation and Renewable Energy (DOE/CE), will lead to the commercial offering by industry of systems meeting full program goals by the years 2000--2002. It is expected that some advanced technology will already have been commercialized in intermediate systems before that time. Teams, led by US turbine manufacturers, will conduct most of the development work in the ATS Program. However, a substantial technology base element of the program see universities and others conduct significant research and development (R D) on generic technology issues relevant to the program. The program is primarily aimed at developing natural gas-fired turbine systems. Although the conversion of ATS to firing with coal or biomass fuels will be addressed in the analysis of ATS, tests will not be conducted in the program to verify conversion to alternate fuel firing. The program will however, include work to transfer advanced technology to the coal- and biomass-fueled systems being developed in other DOE programs.

Webb, H.A. Jr.; Bajura, R.A.; Parsons, E.L. Jr.

1993-01-01T23:59:59.000Z

379

Advanced Turbine Systems Program and coal applications  

Science Conference Proceedings (OSTI)

The US Department of Energy (DOE) is conducting a program to develop ultra high-efficiency, cost-effective, environmentally benign gas turbine systems for industrial and utility applications. The Advanced Turbine Systems (ATS) Program, jointly managed by the DOE`s Office of Fossil Energy (DOE/FE) and Office of Conservation and Renewable Energy (DOE/CE), will lead to the commercial offering by industry of systems meeting full program goals by the years 2000--2002. It is expected that some advanced technology will already have been commercialized in intermediate systems before that time. Teams, led by US turbine manufacturers, will conduct most of the development work in the ATS Program. However, a substantial technology base element of the program see universities and others conduct significant research and development (R&D) on generic technology issues relevant to the program. The program is primarily aimed at developing natural gas-fired turbine systems. Although the conversion of ATS to firing with coal or biomass fuels will be addressed in the analysis of ATS, tests will not be conducted in the program to verify conversion to alternate fuel firing. The program will however, include work to transfer advanced technology to the coal- and biomass-fueled systems being developed in other DOE programs.

Webb, H.A. Jr.; Bajura, R.A.; Parsons, E.L. Jr.

1993-06-01T23:59:59.000Z

380

The Paper Industry: Strategic Alliances, Joint Ventures, and  

E-Print Network (OSTI)

The Paper Industry: Strategic Alliances, Joint Ventures, and Electronic Commerce Are Reshaping Our may take the form of a collaborative effort, licensing of technology, or joint venture (Berryman, 1998 technology is affected when one company licenses its production or service methods to another firm. A joint

Note: This page contains sample records for the topic "advanced joint inversion" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Ring Bolted Joint NSTX-CALC-132-11  

E-Print Network (OSTI)

NSTX Ring Bolted Joint NSTX-CALC-132-11 Rev 0 March 2011 Prepared By assemblies which are connected through a stepped lap joint with four stainless steel bolts. These bolts, must provide sufficient compressive force, through combined preload, to resist the joint separation for all

Princeton Plasma Physics Laboratory

382

JOINT BOX-CONSTRAINT AND DEREGULARIZATION IN MULTIUSER Y. Zakharov  

E-Print Network (OSTI)

JOINT BOX-CONSTRAINT AND DEREGULARIZATION IN MULTIUSER DETECTION Y. Zakharov , J. Luo , and C- ciation (PDA) detectors. We propose a novel iterative multiuser de- tection technique based on joint technique is based on joint deregularized and box-constrained solution to quadratic op- timization

383

FY11 Joint Research Target: Status and Planning on  

E-Print Network (OSTI)

FY11 Joint Research Target: Status and Planning on Alcator C-Mod Jerry Hughes Including slides from: (1) ECC Meeting on FY2010 and FY2011 Joint Research Milestones, April 12, 2010 (2) Alcator C-Mod FY10 capability for the H-mode pedestal is the subject of the FY11 JRT Statement of the FY2011 FES Joint Theory

Princeton Plasma Physics Laboratory

384

3D porosity prediction from seismic inversion and neural networks  

Science Conference Proceedings (OSTI)

In this work, we address the problem of transforming seismic reflection data into an intrinsic rock property model. Specifically, we present an application of a methodology that allows interpreters to obtain effective porosity 3D maps from post-stack ... Keywords: Feed-forward neural network, Matlab, Reservoir characterization, Seismic inversion

Emilson Pereira Leite; Alexandre Campane Vidal

2011-08-01T23:59:59.000Z

385

Inversion of Newberry Volcano high-resolution traveltime residuals  

SciTech Connect

Inversion of the 1984 traveltime data from the array at Newberry Crater was accomplished using a variant of the method presented by Aki and others (1973). Five-hundred-sixty-five traveltime observations for Pg and a deeper reflection, weighted by their variance estimates, were included in the inversion. Azimuths from receiver-to-source range from 80 to 280. The initial-velocity model for the inversion has four layers. The top layer, starting at the surface and extending to an elevation of 1300 meters above sea level, had a P-velocity of 2.5 km/s. There are three layers below this one, each 1500-m thick, with P-velocities of 4.0, 4.6, and 5.2 km/s. The predominant feature in the inversion result in the upper two layers (surface to 200-m below sea level), is the ring of high velocities coincident with the caldera ring-fracture system. This high-velocity ring is up to 11% faster than the average for these two layers. In these layers velocities are a few percent slower than average in the center of the caldera and range from 5 to 10% slower outside the caldera to the south, east, and north. In the third layer (-200 to 1700 m elevation), the magnitude of the high-velocity anomaly around the ring-fracture system is reduced, but the bin in the center of the caldera is nearly 9% slower than the layer average.

Stauber, D.A.

1986-01-01T23:59:59.000Z

386

Ph.D.Thesis Binary inversion of gravity  

E-Print Network (OSTI)

Ph.D.Thesis Binary inversion of gravity data for salt imaging Richard A. Krahenbuhl Center for Gravity, Electrical & Magnetic Studies Colorado School of Mines Department of Geophysics Colorado School of gravity data for salt imaging Richard A. Krahenbuhl Center for Gravity, Electrical & Magnetic Studies

387

Adaptive and reverse adaptive responses for chromosomal inversions...  

NLE Websites -- All DOE Office Websites (Extended Search)

a response which can protect from inversion induction within four hours of high dose irradiation. 0 1 2 3 4 5 6 0 0.01 1 1000 1000+0.01 1000+1 Dose (mGy) M e a n in v e r s io n fr...

388

Intelligent seismic inversion workflow for high-resolution reservoir characterization  

Science Conference Proceedings (OSTI)

Developing a geological model is the first and a very important step during the reservoir simulation and modeling process. The geological model usually represents our best interpretation of the reservoir characteristics that extends beyond the well where ... Keywords: Buffalo Valley Field, Neural networks, Reservoir characterization, Seismic inversion

E. Artun; S. Mohaghegh

2011-02-01T23:59:59.000Z

389

Refactoring Composite to Visitor and Inverse Transformation in Java  

E-Print Network (OSTI)

We describe how to use refactoring tools to transform a Java program conforming to the Composite design pattern into a program conforming to the Visitor design pattern with the same external behavior. We also describe the inverse transformation. We use the refactoring tools provided by IntelliJ IDEA and Eclipse.

Ajouli, Akram

2011-01-01T23:59:59.000Z

390

Molecular pulses: Population inversion with positively chirped short pulses  

E-Print Network (OSTI)

Molecular pulses: Population inversion with positively chirped short pulses Jianshu Cao of molecular systems can be achieved with intense positively chirped broadband laser pulses. To provide and a four-level model is designed to demonstrate for molecular systems the correlation between the sign

Cao, Jianshu

391

Move-to-Front, Distance Coding, and Inversion Frequencies revisited  

Science Conference Proceedings (OSTI)

Move-to-Front, Distance Coding and Inversion Frequencies are three simple and effective techniques used to process the output of the Burrows-Wheeler Transform. In this paper we provide the first complete comparative analyses of these techniques, establishing ... Keywords: Burrows-Wheeler Transform, Data Compression, Empirical entropy

Travis Gagie; Giovanni Manzini

2010-06-01T23:59:59.000Z

392

On a class of inverse electrostatic and elasticity problems  

E-Print Network (OSTI)

We study the inverse electrostatic and elasticity problems associated with Poisson and Navier equations. The uniqueness of solutions of these problems is proved for piecewise constant electric charge and internal stress distributions having a checkered structure: they are constant on rectangular blocks. Such distributions appear naturally in practical applications. We also discuss computational challenges arising in the numerical implementation of our method.

Andrei Artemev; Leonid Parnovski; Iosif Polterovich

2012-09-29T23:59:59.000Z

393

DYNAMIC INVERSE PROBLEM IN A WEAKLY LATERALLY INHOMOGENEOUS MEDIUM.  

E-Print Network (OSTI)

the earth's crust which contain gas, oil or other minerals as well as determination of their physical costs and outcomes in exploitation. In practice, in e.g. oil exploration and seismology this inverse applications, a pure layered structure occurs rare. However, in many cases in seismology and oil exploration

394

Advanced Windows Test Facility  

NLE Websites -- All DOE Office Websites (Extended Search)

Exterior of Advanced Windows Test Facility Exterior of Advanced Windows Test Facility Advanced Windows Test Facility This multi-room laboratory's purpose is to test the performance and properties of advanced windows and window systems such as electrochromic windows, and automatically controlled shutters and blinds. The lab simulates real-world office spaces. Embedded instrumentation throughout the lab records solar gains and losses for specified time periods, weather conditions, energy use, and human comfort indicators. Electrochromic glazings promise to be a major advance in energy-efficient window technology, helping to achieve the goal of transforming windows and skylights from an energy liability in buildings to an energy source. The glazing can be reversibly switched from a clear to a transparent, colored

395

Advanced Fuels Synthesis  

NLE Websites -- All DOE Office Websites (Extended Search)

Advanced Fuels Synthesis Advanced Fuels Synthesis Coal and Coal/Biomass to Liquids Advanced Fuels Synthesis The Advanced Fuels Synthesis Key Technology is focused on catalyst and reactor optimization for producing liquid hydrocarbon fuels from coal/biomass mixtures, supports the development and demonstration of advanced separation technologies, and sponsors research on novel technologies to convert coal/biomass to liquid fuels. Active projects within the program portfolio include the following: Fischer-Tropsch fuels synthesis Small Scale Coal Biomass Liquids Production Using Highly Selective Fischer Tropsch Catalyst Small Scale Pilot Plant for the Gasification of Coal and Coal/Biomass Blends and Conversion of Derived Syngas to Liquid Fuels Via Fischer-Tropsch Synthesis Coal Fuels Alliance: Design and Construction of Early Lead Mini Fischer-Tropsch Refinery

396

Evaluation of Medium-Voltage Cable Joints: Single-Phase, Three-Phase, and Branch Transition Joints  

Science Conference Proceedings (OSTI)

This report evaluates three single-phase transition joints, three three-phase trifurcating transition joints, and one three-phase trifurcating transition branch joint between ethylene propylene rubber (EPR) and paper-insulated lead-covered (PILC) 15-kV cables. Among installation parameters evaluated are time to install, complexity, skill required, ease of assembly, margin for error, and space needed for joint assembly and fabrication.

2003-05-19T23:59:59.000Z

397

Sensitivity study on hydraulic well testing inversion using simulated annealing  

DOE Green Energy (OSTI)

For environmental remediation, management of nuclear waste disposal, or geothermal reservoir engineering, it is very important to evaluate the permeabilities, spacing, and sizes of the subsurface fractures which control ground water flow. Cluster variable aperture (CVA) simulated annealing has been used as an inversion technique to construct fluid flow models of fractured formations based on transient pressure data from hydraulic tests. A two-dimensional fracture network system is represented as a filled regular lattice of fracture elements. The algorithm iteratively changes an aperture of cluster of fracture elements, which are chosen randomly from a list of discrete apertures, to improve the match to observed pressure transients. The size of the clusters is held constant throughout the iterations. Sensitivity studies using simple fracture models with eight wells show that, in general, it is necessary to conduct interference tests using at least three different wells as pumping well in order to reconstruct the fracture network with a transmissivity contrast of one order of magnitude, particularly when the cluster size is not known a priori. Because hydraulic inversion is inherently non-unique, it is important to utilize additional information. The authors investigated the relationship between the scale of heterogeneity and the optimum cluster size (and its shape) to enhance the reliability and convergence of the inversion. It appears that the cluster size corresponding to about 20--40 % of the practical range of the spatial correlation is optimal. Inversion results of the Raymond test site data are also presented and the practical range of spatial correlation is evaluated to be about 5--10 m from the optimal cluster size in the inversion.

Nakao, Shinsuke; Najita, J.; Karasaki, Kenzi

1997-11-01T23:59:59.000Z

398

Joint Outreach Task Group (JOTG) Calendar: June  

NLE Websites -- All DOE Office Websites (Extended Search)

Former Worker Program (FWP) Home Covered Sites/Populations › Construction Worker Screening Projects › Production Worker Screening Projects › Supplemental Screening Program › Beryllium Vendor Screening Program Upcoming Events Program Implementation Outreach Medical Screening - Conventional Medical Screening - Early Lung Cancer Detection Communicating Results Protecting Participant Information Sharing De-identified Data Chronic Beryllium Disease Awareness Joint Outreach Task Group (JOTG) Worker Testimonials Contact Us FWP Scientific Publications FWP Documents Related Links Office of Health and Safety Home Page HSS Logo Joint Outreach Task Group Calendar: June 2013 Sunday Monday Tuesday Wednesday Thursday Friday Saturday 26 27 28 29 30 31 1 2 3 4 FWP Event Mound Miamisburg, OH

399

U.S.-Sweden Joint PHEV Research  

NLE Websites -- All DOE Office Websites (Extended Search)

to jointly develop new plug-in to jointly develop new plug-in hybrid vehicle (PHEV) technology and accelerate its consumer acceptance and commercialization, the U.S. Department of Energy (DOE) and Sweden signed a Memorandum of Understanding (MOU) in July for a one year, $1 million cost-sharing agreement to be equally funded by DOE and the Swedish Energy Agency. Through contacts developed over many years conducting international technology assessment for the Department of Energy, Argonne National Laboratory initiated the MOU, which was signed by DOE Assistant Secretary Alexander Karsner and Director General of the Swedish Energy Agency Tomas KÃ¥berger, on the Swedish island of Gotland. The ceremony included comments by Swedish Deputy Prime Minister Maud Olofsson and U.S. Ambassador to Sweden Michael

400

Transfer maps and nonexistence of joint determinant.  

E-Print Network (OSTI)

Transfer Maps, sometimes called norm maps, for Milnor's $K$-theory were first defined by Bass and Tate (1972) for simple extensions of fields via tame symbol and Weil's reciprocity law, but their functoriality had not been settled until Kato (1980). On the other hand, functorial transfer maps for the Goodwillie group are easily defined. We show that these natural transfer maps actually agree with the classical but difficult transfer maps by Bass and Tate. With this result, we build an isomorphism from the Goodwillie groups to Milnor's $K$-groups of fields, which in turn provides a description of joint determinants for the commuting invertible matrices. In particular, we explicitly determine certain joint determinants for the commuting invertible matrices over a finite field, the field of rational numbers, real numbers and complex numbers into the respective group of units of given field.

Sung Myung

Note: This page contains sample records for the topic "advanced joint inversion" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Genomic Advances to Improve Biomass for Biofuels (LBNL Science at the Theater)  

DOE Green Energy (OSTI)

Lawrence Berkeley National Lab bioscientist Daniel Rokhsar discusses genomic advances to improve biomass for biofuels. He presented his talk Feb. 11, 2008 in Berkeley, California as part of Berkeley Lab's community lecture series. Rokhsar works with the U.S. Department of Energy's Joint Genome Institute and Berkeley Lab's Genomics Division.

Rokhsar, Daniel

2008-02-11T23:59:59.000Z

402

Joint quantum measurements with minimum uncertainty  

E-Print Network (OSTI)

Quantum physics constrains the accuracy of joint measurements of incompatible observables. Here we test tight measurement-uncertainty relations using single photons. We implement two independent, idealized uncertainty-estimation methods, the 3-state method and the weak-measurement method, and adapt them to realistic experimental conditions. Exceptional quantum state fidelities of up to 0.99998(6) allow us to verge upon the fundamental limits of measurement uncertainty.

Martin Ringbauer; Devon N. Biggerstaff; Matthew A. Broome; Alessandro Fedrizzi; Cyril Branciard; Andrew G. White

2013-08-26T23:59:59.000Z

403

Physical metallurgy issues in solder joint performance  

Science Conference Proceedings (OSTI)

In order to simulate solder fabrication, a simplified axisymmetric ''microcell'' model of the assembly was used. Results of constant temperature compressive creep experiments were fitted to the Sherby-Dorn steady state creep equation for use in the analyses. Experimental studies have been performed to evaluate the effect of material layup, solder joint thickness, and number of thermal cycles on the tensile strength of solder bonds. (LEW)

Stephens, J.J. Jr.; Bourcier, R.J.

1986-01-01T23:59:59.000Z

404

Joint Radio Resource Management and QoS Implications of Software Downloading for SDR Terminals  

E-Print Network (OSTI)

This paper presents research on advanced spectrum sharing techniques lead in TRUST and focuses on Radio Access Technologies' (RaTs) joint radio resource management (JRRM). This paper provides details on cellular FDD/TDD JRRM and addresses the different sources of traffic (regular asymmetric and download) to be considered in an SDR context. The TRUST research on impact of sot'tware downloads on UMTS system resources is introduced and some of the future research topics to be investigated in the TRUST follow-up project SCOUT are presented.

Nicolas Motte; Robert Rümmler; David Grandblaise; David Gr; Lucas Elicegui; Didier Bourse; Eiko Seidel

2002-01-01T23:59:59.000Z

405

Joint reconstructions of CO2 plumes using a Markov Chain Monte Carlo approach  

SciTech Connect

We describe a stochastic inversion method for mapping subsurface regions where CO{sub 2} saturation is changing. The technique combines prior information with measurements of injected CO{sub 2} volume, reservoir deformation and electrical resistivity. Bayesian inference and a Metropolis simulation algorithm form the basis for this approach. The method can (a) jointly reconstruct disparate data types such as surface or subsurface tilt, electrical resistivity, and injected CO{sub 2} volume measurements, (b) provide quantitative measures of the result uncertainty, (c) identify competing models when the available data are insufficient to definitively identify a single optimal model and (d) rank the alternative models based on how well they fit available data. We use measurements collected during CO{sub 2} injection for enhanced oil recovery to illustrate the method's performance. The stochastic inversions provide estimates of the most probable location, shape, volume of the plume and most likely CO{sub 2} saturation. The results suggest that the method can reconstruct data with poor signal to noise ratio.

Ramirez, A; Friedmann, S J; Foxall, W; Dyer, K; Kirkendall, B; Aines, R; Daily, W

2006-04-07T23:59:59.000Z

406

Look at this: the neural correlates of initiating and responding to bids for joint attention  

E-Print Network (OSTI)

When engaging in joint attention, one person directs another person's attention to an object (Initiating Joint Attention, IJA), and the second person's attention follows (Responding to Joint Attention, RJA). As such, joint ...

Redcay, Elizabeth

407

Perestroika, Soviet oil, and joint ventures  

SciTech Connect

Glaznost, the freedom of expression in both the public and private sectors of the Soviet Union, has rapidly transformed the country form a largely isolated and closed society to one that is rapidly becoming more cosmopolitan and open to the West. Now that the Soviet Union is moving toward a free-market economy, a number of new laws are being generated to create a favorable environment for Western investment, especially joint ventures. First, crude oil sales have provided over 75% of much-needed hard currency, and oil has been the principal barter for manufactured goods produced in eastern Europe. Second, joint oil ventures with Western companies can reverse declining production levels and provide sufficient stimulus to turn around the economic recession. The Soviet Union has a very large inventory of discovered but undeveloped oil and gas fields. Most of these fields are difficult for the Soviets to produce technically, financially, and environmentally safely, and they are actively seeking appropriate Western partners. From an exploration point of view, the Soviet Union has probably the largest number of undrilled and highly prospective oil basins, which may replenish declining reserves in the West. Finally, the Soviet Union represents in the long term a large unsaturated market eager to absorb the surplus of goods and services in the Western world. Again, joint oil ventures could provide the convertible currency to increase East-West trade.

Churkin, M. Jr.

1991-08-01T23:59:59.000Z

408

Advancing Innovation and Industrial Competitiveness  

Science Conference Proceedings (OSTI)

... institutions to run the Hollings Marine Laboratory in Charleston, SC, and jointly ... NIST that would double its core laboratory program budget over time ...

2013-04-12T23:59:59.000Z

409

Joint Global Change Research Institute | Open Energy Information  

Open Energy Info (EERE)

Global Change Research Institute Global Change Research Institute Jump to: navigation, search Logo: Joint Global Change Research Institute Name Joint Global Change Research Institute Agency/Company /Organization Pacific Northwest National Laboratory Sector Energy, Land Focus Area Energy Efficiency Topics Policies/deployment programs, Resource assessment, Pathways analysis Website http://www.globalchange.umd.ed References Global Change Research Institute [1] Abstract The Joint Global Change Research Institute (JGCRI) houses an interdisciplinary team dedicated to understanding the problems of global climate change and their potential solutions. Joint Institute staff bring decades of experience and expertise to bear in science, technology, economics, and policy. "The Joint Global Change Research Institute (JGCRI) houses an

410

Materials - Coatings & Lubricants - Illinois Center for Advanced Tribology  

NLE Websites -- All DOE Office Websites (Extended Search)

Illinois Center for Advanced Tribology Illinois Center for Advanced Tribology ICAT brochure cover TRI - BOL*O*GY (N) -- the science and technology of friction, wear, and lubrication of interacting surfaces in relative motion. The Illinois Center for Advanced Tribology (ICAT) is a virtual center that brings together the skills and talents of multiple investigators and unique facilities from Argonne National Laboratory and three partnering universities to resolve critical friction, wear, and lubrication issues in biomedical implants, alternative energy technologies, and extreme environments. The Center's tribology experts work closely with industry, and with state and federal agencies through jointly funded research projects, to perform leading-edge research on the impact of materials, coatings, and fluids on

411

The New Center for Advanced Energy Studies  

SciTech Connect

A secure and affordable energy supply is essential for achieving U.S. national security, in continuing U.S. prosperity and in laying the foundation to enable future economic growth. The next generation energy workforce in the U.S. is a critical element in meeting both national and global energy needs. The Center for Advanced Energy Studies (CAES) was established in 2005 in response to U.S. Department of Energy (DOE) requirements. CAES, located at the new Idaho National Laboratory (INL), will address critical energy education, research, policy study and training needs. CAES is a unique joint partnership between the Battelle Energy Alliance (BEA), the State of Idaho, an Idaho University Consortium (IUC), and a National University Consortium (NUC). CAES will be based in a new facility that will foster collaborative academic and research efforts among participating institutions.

L.J. Bond; K. Kostelnik; R.A. Wharton; A. Kadak

2006-06-01T23:59:59.000Z

412

NETL: Advanced Research  

NLE Websites -- All DOE Office Websites (Extended Search)

AR AR Coal and Power Systems Advanced Research 12.11.13: Request for Information entitled "Novel Crosscutting Research and Development to Support Advanced Energy Systems". Application due date is January 15, 2014. The RFI and/or instructions can be found on the FedConnect site at FedConnect. Achieving Successes in High Performance Materials, Coal Utilization Sciences, Sensors & Controls Innovations, Computational Energy Sciences, Cooperative Research and Development, and sponsoring Education Initiatives. The Advanced Research (AR) program within NETL's Office of Coal and Power Systems fosters the development of innovative, cost-effective technologies for improving the efficiency and environmental performance of advanced coal and power systems. In addition, AR bridges the gap between fundamental

413

Advanced Chlorophyll Fluorometer  

To advance miniaturization of the AquaSentinel environmental monitoring technology, ORNL and the University of Tennessee researchers developed a microfluidics-based pulse amplitude modulation (PAM) chlorophyll fluorometer—the first of its ...

414

Advancement of Electrochromic Windows  

E-Print Network (OSTI)

Research Energy Systems Integration Advancement ofintegration issues related to using EC windows within a whole building energy efficient systemenergy- savings benefit with EC-daylighting-HVAC integration (assuming a conventional VAV system

2006-01-01T23:59:59.000Z

415

Advanced Cathode Catalysts  

NLE Websites -- All DOE Office Websites (Extended Search)

Fuel Cell Research 1 HFCIT Program Kick-off Meeting, Arlington, VA, February 13-14, 2007 Program Kick-off Meeting Arlington, Virginia, February 13-14, 2007 Advanced Cathode...

416

Search Asia Advanced Search  

E-Print Network (OSTI)

Asia Times Search Asia Times Advanced Search Southeast Asia Malaysia tackles illegal logging:52:14 AM Search #12;Asia Times illegal logging," he said, adding that nine Malaysians had been arrested

417

Search Asia Advanced Search  

E-Print Network (OSTI)

Asia Times Search Asia Times Advanced Search Southeast Asia Indonesia looks to curb log smuggling.html (1 of 2)9/4/2007 12:59:34 PM Search #12;Asia Times No material from Asia Times Online may

418

About | Advanced Photon Source  

NLE Websites -- All DOE Office Websites (Extended Search)

the APS Welcome to the Advanced Photon Source Here you will find an introduction and tour of the facility, as well as information about the organizations and opportunities at...

419

Nanostructured Materials for Advanced  

E-Print Network (OSTI)

of electric vehicles (EVs) and hybrid electric vehicles (HEVs). High energy and high power densitiesT Nanostructured Materials for Advanced Li-Ion Rechargeable Batteries THE RECENT INCREASE IN demand

Cao, Guozhong

420

DOE-WRI Jointly Sponsored Research Program on Energy-Related Topics  

NLE Websites -- All DOE Office Websites (Extended Search)

Power Systems Power Systems Advanced Research ContaCts Kamalendu Das Project Manager Gasification and Combustion Projects Division National Energy Technology Laboratory 3610 Collins Ferry Road P.O. Box 880 Morgantown, WV 26507 304-285-4065 kamal.das@netl.doe.gov Robert R. Romanosky Technology Manager Advanced Research National Energy Technology Laboratory 3610 Collins Ferry Road P.O. Box 880 Morgantown, WV 26507 304-285-4721 robert.romanosky@netl.doe.gov Vijay K. sethi Western Research Institute 365 North 9th Street P.O. Box 3395 Laramie, WY 82072-3380 307-721-2376 vsethi@uwyo.edu http://wri.uwyo.edu/ DOE-WRI JOIntly SpOnSORED RESEaRch pROgRam On EnERgy-RElatED tOpIcS Description For over two decades, the University of Wyoming Research Corporation - doing business as the Western Research Institute (WRI) - has been supporting the

Note: This page contains sample records for the topic "advanced joint inversion" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

DOE-EERC Fossil Energy Base Program and Jointly Sponsored Research Program  

NLE Websites -- All DOE Office Websites (Extended Search)

DOE-EERC FOssil EnERgy BasE PROgRam DOE-EERC FOssil EnERgy BasE PROgRam anD JOintly sPOnsORED REsEaRCh PROgRam Description Since 1998, the U.S. Department of Energy (DOE), through the Advanced Research Program of the National Energy Technology Laboratory (NETL), has been providing financial support to the University of North Dakota's Energy and Environmental Research Center (EERC). Within the framework of two cooperative agreements, the EERC performs research, development, and demonstration (RD&D) projects aimed at advancing the deployment of technologies that will improve energy efficiency and environmental performance of fossil energy systems in areas that would otherwise not be adequately addressed by the private sector. Under a Base agreement, the EERC focuses on new concepts for highly efficient,

422

Advanced Distribution Monitoring  

Science Conference Proceedings (OSTI)

Advanced Distribution Automation (ADA) is a concept for a fully controllable and flexible distribution system that will facilitate the exchange of electrical energy AND information between participants and system components. Advances in the monitoring of system parameters like voltages, currents and breaker/switch positions as well as environmental variables like temperature and wind speed will be required in order to fully implement ADA. This report presents background information on distribution monito...

2005-12-05T23:59:59.000Z

423

Joint Session with Neutron and X-Ray Studies of Advanced Materials  

Science Conference Proceedings (OSTI)

Feb 28, 2011 ... A new generation of MW spallation neutron sources is providing unprecedented measurements of the dynamics of systems in, and away from, ...

424

Advanced thermionic energy conversion. Joint highlights and status report, November--December 1977  

DOE Green Energy (OSTI)

Studies of negative ion effects in thermionic converters are outlined. It was found that adverse negative ion effects were caused primarily by hydrogen impurities. Plans for an experiment with better cesium distillation and gas gettering schemes are discussed. (WHK)

Not Available

1977-01-01T23:59:59.000Z

425

III JOINT SYMPOSIUM OF TAIWAN-RUSSIA RESEARCH COOPERATION ON ADVANCED PROBLEMS IN  

E-Print Network (OSTI)

of Lomonosov Moscow State University 18 time operating system. The sampling time in our control system is 1 velocity and a #12;Institute of Mechanics of Lomonosov Moscow State University 4 positive average system with two internal bodies #12;Institute of Mechanics of Lomonosov Moscow State University 6

Kaplan, Alexander

426

Application of inverse modeling to geothermal reservoir simulation  

DOE Green Energy (OSTI)

The authors have developed inverse modeling capabilities for the non-isothermal, multiphase, multicomponent numerical simulator TOUGH2 to facilitate automatic history matching and parameter estimation based on data obtained during testing and exploitation of geothermal fields.The ITOUGH2 code allows one to estimate TOUGH2 input parameters based on any type of observation for which a corresponding simulation output can be calculated. Furthermore, a detailed residual and error analysis is performed, and the uncertainty of model predictions can be evaluated. Automatic history matching using ITOUGH2 is robust and efficient so that model parameters affecting geothermal field performance can reliably be estimated based on a variety of field measurements such as pressures, temperatures, flow rates, and enthalpies. The paper describes the methodology of inverse modeling and provides a detailed discussion of sample problems to demonstrate the application of the method to data from geothermal reservoirs.

Finsterle, S.; Pruess, K. [Lawrence Berkeley National Lab., CA (United States). Earth Sciences Div.; Bullivant, D.P.; O`Sullivan, M.J. [Univ. of Auckland (New Zealand). Dept. of Engineering Science

1997-01-01T23:59:59.000Z

427

Radiative inverse seesaw neutrino mass and dark matter  

SciTech Connect

Seesaw mechanism provides a natural explanation of light neutrino masses through suppression of heavy seesaw scale. In inverse seesaw models the seesaw scale can be much lower than that in the usual seesaw models. If terms inducing seesaw masses are further induced by loop corrections, the seesaw scale can be lowered to be in the range probed by experiments at the LHC without fine tuning. This talk, presented by X-G He, discuss models constructed in a recent preprint by us (arxiv:201207.6308) in which neutrino masses are generated at two loop level through inverse seesaw mechanism. These models also naturally have dark matter candidates. Although the recent data from Xenon100 put stringent constraint on the models, they can be consistent with data on neutrino masses, mixing, dark matter relic density and direct detection.

Guo Gang [INPAC, Department of Physics and Shanghai Key Laboratory for Particle Physics and Cosmology Shanghai Jiao Tong University, Shanghai (China); He Xiaogang [INPAC, Department of Physics and Shanghai Key Laboratory for Particle Physics and Cosmology Shanghai Jiao Tong University, Shanghai (China) and Department of Physics, National Tsing Hua University, and NCTS, Hsinchu, Taiwan (China); Li Guannan [INPAC, Department of Physics and Shanghai Key Laboratory for Particle Physics and Cosmology Shanghai Jiao Tong University, Shanghai, Taiwan (China)

2013-05-23T23:59:59.000Z

428

Inverse variational problem for non-standard Lagrangians  

E-Print Network (OSTI)

The non-standard Lagrangians (NSLs) for dissipative-like dynamical systems were introduced in an ad hoc fashion rather than being derived from the solution of the inverse problem of variational calculus. We begin with the first integral of the equation of motion and solve the associated inverse problem to obtain some of the existing results for NSLs. In addition, we provide a number of alternative Lagrangian representations. The case studies envisaged by us include (i) the usual modified Emden-type equation, (ii) Emden-type equation with dissipative term quadratic in velocity and (iii) Lokta-Volterra model. We point out that our method is quite general for applications to other physical systems.

Aparna Saha; B Talukdar

2013-05-28T23:59:59.000Z

429

The use of Bayesian inversion to resolve plasma equilibrium  

SciTech Connect

Recently, Bayesian probability theory has been used at a number of experiments to fold uncertainties and interdependencies in the diagnostic data and forward models, together with prior knowledge of the state of the plasma, to increase accuracy of inferred physics variables. A new probabilistic framework, MINERVA, based on Bayesian graphical models, has been used at JET and W7-AS to yield predictions of internal magnetic structure. A feature of the framework is the Bayesian inversion for poloidal magnetic flux without the need for an explicit equilibrium assumption. Building on this, we discuss results from a new project to develop Bayesian inversion tools that aim to (1) distinguish between competing equilibrium theories, which capture different physics, using the MAST spherical tokamak, and (2) test the predictions of MHD theory, particularly mode structure, using the H-1 Heliac. Specifically, we report on correction of the motional Stark effect, pickup coils, flux-loop constrained Bayesian inferred equilibrium for varying toroidal flux.

Hole, M. J.; Nessi, G. von; Pretty, D.; Howard, J.; Blackwell, B. [Research School of Physics and Engineering, Australian National University, ACT 0200 (Australia); Svensson, J. [Max Planck Institute for Plasma Physics, Teilinstitut Greifswald D17491 (Germany); Appel, L. C. [Euratom/CCFE, Culham Science Centre, Abingdon, Oxon OX143DB (United Kingdom)

2010-10-15T23:59:59.000Z

430

NETL: Advanced NOx Emissions Control  

NLE Websites -- All DOE Office Websites (Extended Search)

Home > Technologies > Coal & Power Systems > Innovations for Existing Plants > Advanced NOx Emissions Control Innovations for Existing Plants Advanced NOx Emissions Control Adv....

431

Advance Electronics | Open Energy Information  

Open Energy Info (EERE)

Advance Electronics Jump to: navigation, search Name Advance Electronics Place United Kingdom Zip LL14 3YR Product Develop and deliver power conditioners, transient suppressors,...

432

Joint electric power alternatives study. Appendix G. Joint parallel nuclear alternatives study for Russia. Final report  

Science Conference Proceedings (OSTI)

The Joint Parallel Nuclear Alternatives Study for Russia (JPNAS) is a parallel study to the Joint Electric Power Alternatives Study (JEPAS). The JPNAS assessed the costs of enhancing the safety level of Russian nuclear power plants (NPPs), decommissioning of RBMK-1000 and first generation VVER-440 units, completion of NPP construction, NPP repowering into fossil fuel plants, and construction of new generation NPPs. In the framework of the JEPAS, the JPNAS provides data on the nuclear sector which is needed to formulate an integrated resources plan and schedule for investments for the development of Russia`s power sector.

NONE

1995-06-01T23:59:59.000Z

433

Effects of Inversion Height and Surface Heat Flux on Downslope Windstorms  

Science Conference Proceedings (OSTI)

Simulations are presented focusing on the role of temperature inversions in controlling the formation and strength of downslope wind storms. Three mechanisms are examined depending on the relative height of the inversion with respect to the ...

Craig M. Smith; Eric D. Skyllingstad

2011-12-01T23:59:59.000Z

434

Skill in an Inversion Solution: CONVEX-91 Hydrographic Results Compared with ADCP Measurements  

Science Conference Proceedings (OSTI)

This paper demonstrates skill in simple linear inversion solutions in two ways: first, qualitatively, by showing that the inversion method can put in place a known feature of the deep circulation of the study region when initialized with ...

Sheldon Bacon

1994-12-01T23:59:59.000Z

435

Analysis of the Impact of Model Nonlinearities in Inverse Problem Solving  

Science Conference Proceedings (OSTI)

In this study, the relationship between nonlinear model properties and inverse problem solutions is analyzed using a numerical technique based on the inverse problem theory formulated by Mosegaard and Tarantola. According to this theory, the ...

T. Vukicevic; D. Posselt

2008-09-01T23:59:59.000Z

436

Parameterization of Inversion Breakup in Idealized Valleys. Part II: Thermodynamic Model  

Science Conference Proceedings (OSTI)

A simple thermodynamic parameterization based on a modified version of the Whiteman and McKee inversion destruction model is presented to simulate the evolution of vertical temperature structure during the inversion breakup period in idealized ...

N. M. Zoumakis; G. A. Efstathiou

2006-04-01T23:59:59.000Z

437

Data Assimilation and Inverse Methods in Terms of a Probabilistic Formulation  

Science Conference Proceedings (OSTI)

The weak constraint inverse for nonlinear dynamical models is discussed and derived in term of a probabilistic formulation. The well-known result that for Gaussian error statistics the minimum of the weak constraint inverse is equal to the ...

Peter Jan van Leeuwen; Geir Evensen

1996-12-01T23:59:59.000Z

438

Parameterization of Inversion Breakup in Idealized Valleys. Part I: The Adjustable Model Parameters  

Science Conference Proceedings (OSTI)

The factors that affect the atmospheric energy budget approach used in the thermodynamic valley inversion destruction model of Whiteman and McKee are investigated theoretically. The height at which the sinking inversion top meets the rising ...

N. M. Zoumakis; G. A. Efstathiou

2006-04-01T23:59:59.000Z

439

Simulated synchrotron and Inverse Compton emission from Pulsar Wind Nebulae  

E-Print Network (OSTI)

We present a complete set of diagnostic tools aimed at reproducing synthetic non-thermal (synchrotron and/or Inverse Compton, IC) emissivity, integrated flux energy, polarization and spectral index simulated maps in comparison to observations. The time dependent relativistic magnetohydrodynamic (RMHD) equations are solved with a shock capturing code together with the evolution of the maximum particles energy. Applications to Pulsar Wind Nebulae (PWNe) are shown.

Volpi, Delia; Amato, Elena; Bucciantini, Niccolo

2007-01-01T23:59:59.000Z

440

The Inverse Problem of Remote Neutrino Diagnostics of Intrareactor Processes  

E-Print Network (OSTI)

Using the well-known experimental data the inverse problem of neutrino diagnostics of reactor core is considered. The solution of this problem makes it possible to determine distantly the current value of nuclear density of each nuclear fuel components with known accuracy and also opens up the possibility for the development of neutrino online technology of temporal evolution of nuclear fuel isotopic structure and reactor power.

V. D. Rusov; T. N. Zelentsova; V. A. Tarasov; D. A. Litvinov

2004-03-19T23:59:59.000Z

Note: This page contains sample records for the topic "advanced joint inversion" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Three-dimensional induced polarization data inversion for complex resistivity  

DOE Green Energy (OSTI)

The conductive and capacitive material properties of the subsurface can be quantified through the frequency-dependent complex resistivity. However, the routine three-dimensional (3D) interpretation of voluminous induced polarization (IP) data sets still poses a challenge due to large computational demands and solution nonuniqueness. We have developed a flexible methodology for 3D (spectral) IP data inversion. Our inversion algorithm is adapted from a frequency-domain electromagnetic (EM) inversion method primarily developed for large-scale hydrocarbon and geothermal energy exploration purposes. The method has proven to be efficient by implementing the nonlinear conjugate gradient method with hierarchical parallelism and by using an optimal finite-difference forward modeling mesh design scheme. The method allows for a large range of survey scales, providing a tool for both exploration and environmental applications. We experimented with an image focusing technique to improve the poor depth resolution of surface data sets with small survey spreads. The algorithm's underlying forward modeling operator properly accounts for EM coupling effects; thus, traditionally used EM coupling correction procedures are not needed. The methodology was applied to both synthetic and field data. We tested the benefit of directly inverting EM coupling contaminated data using a synthetic large-scale exploration data set. Afterward, we further tested the monitoring capability of our method by inverting time-lapse data from an environmental remediation experiment near Rifle, Colorado. Similar trends observed in both our solution and another 2D inversion were in accordance with previous findings about the IP effects due to subsurface microbial activity.

Commer, M.; Newman, G.A.; Williams, K.H.; Hubbard, S.S.

2011-03-15T23:59:59.000Z

442

Bayesian Uncertainty Quantification for Large Scale Spatial Inverse Problems  

E-Print Network (OSTI)

We considered a Bayesian approach to nonlinear inverse problems in which the unknown quantity is a high dimension spatial field. The Bayesian approach contains a natural mechanism for regularization in the form of prior information, can incorporate information from heterogeneous sources and provides a quantitative assessment of uncertainty in the inverse solution. The Bayesian setting casts the inverse solution as a posterior probability distribution over the model parameters. Karhunen-Lo'eve expansion and Discrete Cosine transform were used for dimension reduction of the random spatial field. Furthermore, we used a hierarchical Bayes model to inject multiscale data in the modeling framework. In this Bayesian framework, we have shown that this inverse problem is well-posed by proving that the posterior measure is Lipschitz continuous with respect to the data in total variation norm. The need for multiple evaluations of the forward model on a high dimension spatial field (e.g. in the context of MCMC) together with the high dimensionality of the posterior, results in many computation challenges. We developed two-stage reversible jump MCMC method which has the ability to screen the bad proposals in the first inexpensive stage. Channelized spatial fields were represented by facies boundaries and variogram-based spatial fields within each facies. Using level-set based approach, the shape of the channel boundaries was updated with dynamic data using a Bayesian hierarchical model where the number of points representing the channel boundaries is assumed to be unknown. Statistical emulators on a large scale spatial field were introduced to avoid the expensive likelihood calculation, which contains the forward simulator, at each iteration of the MCMC step. To build the emulator, the original spatial field was represented by a low dimensional parameterization using Discrete Cosine Transform (DCT), then the Bayesian approach to multivariate adaptive regression spline (BMARS) was used to emulate the simulator. Various numerical results were presented by analyzing simulated as well as real data.

Mondal, Anirban

2011-08-01T23:59:59.000Z

443

A GPU-COMPUTING APPROACH TO SOLAR STOKES PROFILE INVERSION  

Science Conference Proceedings (OSTI)

We present a new computational approach to the inversion of solar photospheric Stokes polarization profiles, under the Milne-Eddington model, for vector magnetography. Our code, named GENESIS, employs multi-threaded parallel-processing techniques to harness the computing power of graphics processing units (GPUs), along with algorithms designed to exploit the inherent parallelism of the Stokes inversion problem. Using a genetic algorithm (GA) engineered specifically for use with a GPU, we produce full-disk maps of the photospheric vector magnetic field from polarized spectral line observations recorded by the Synoptic Optical Long-term Investigations of the Sun (SOLIS) Vector Spectromagnetograph (VSM) instrument. We show the advantages of pairing a population-parallel GA with data-parallel GPU-computing techniques, and present an overview of the Stokes inversion problem, including a description of our adaptation to the GPU-computing paradigm. Full-disk vector magnetograms derived by this method are shown using SOLIS/VSM data observed on 2008 March 28 at 15:45 UT.

Harker, Brian J. [National Solar Observatory, Tucson, AZ 85719 (United States); Mighell, Kenneth J., E-mail: bharker@nso.edu, E-mail: mighell@noao.edu [National Optical Astronomy Observatory, Tucson, AZ 85719 (United States)

2012-09-20T23:59:59.000Z

444

Advanced Vehicle Technologies Awards | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Advanced Vehicle Technologies Awards Advanced Vehicle Technologies Awards Microsoft Word - VTP 175 Advanced Vehicle Tech project descriptions draft v5 8-2-11 AdvancedVehiclesTechn...

445

CS4353 Course Outline Advanced Graphics ?  

E-Print Network (OSTI)

• Introduce advanced interactive computer graphics concepts • Introduce advanced architecture of computer graphics devices • Introduce advanced mathematical representation of graphic images • Develop advanced graphics programming skills

Instructor John; E. Howl

2009-01-01T23:59:59.000Z

446

Adaptive fuzzy model based inverse controller design using BB-BC optimization algorithm  

Science Conference Proceedings (OSTI)

The use of inverse system model as a controller might be an efficient way in controlling non-linear systems. It is also a known fact that fuzzy logic modeling is a powerful tool in representing nonlinear systems. Therefore, inverse fuzzy model can be ... Keywords: Big Bang-Big Crunch optimization, Fuzzy logic controller, Fuzzy model inversion, Heat transfer process, Inverse model based control, pH process

Tufan Kumbasar; Ibrahim Eksin; Mujde Guzelkaya; Engin Yesil

2011-09-01T23:59:59.000Z

447

STATEMENT OF CONSIDERATIONS REQUEST BY CATERPILLAR, INC. (CATERPILLAR) FOR AN ADVANCE  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

AN ADVANCE AN ADVANCE WAIVER OF DOMESTIC AND FOREIGN PATENT RIGHTS UNDER DOE COOPERATIVE AGREEMENT NO. DE-FC07-01ID14242; W(A)-02-012; CH-1096 The Petitioner, Caterpillar, Inc, has requested a waiver of domestic and foreign patent rights for all subject inventions arising from its participation under the above referenced cooperative agreement entitled "Virtual Welded-Joint Design Integrating Advanced Materials and Processing Technology." The objective of this cooperative agreement is to integrate multiple models for high performance weld joint design, including a weld thermo-fluid model, a weld micro- structural model, a weld material property model, weld structural model, and a weld fatigue model. The total anticipated cost of the cooperative agreement is about $1.5 million,

448

The application research of compound control based on the fuzzy neural network inverse method  

Science Conference Proceedings (OSTI)

Through the study of the boiler-turbine coordination and control network, this paper analysis the difficulties of the inverse system analytical method in practical use. A structure and learning method with close to the dynamic inverse system capacity ... Keywords: compound control, decoupling control instruction, inverse system, neural network

Qingli Wang; Yuanwei Jing; Lifu Wang; Zhi Kong

2009-06-01T23:59:59.000Z

449

Efficient scalable VLSI architecture for Montgomery inversion in GF(p)  

Science Conference Proceedings (OSTI)

The multiplicative inversion operation is a fundamental computation in several cryptographic applications. In this work, we propose a scalable VLSI hardware to compute the Montgomery modular inverse in GF(p). We suggest a new correction phase ... Keywords: Montgomery inverse, elliptic curve cryptography, scalable hardware design

Adnan Abdul-Aziz Gutub; Alexandre Ferreira Tenca

2004-05-01T23:59:59.000Z

450

Inversion of Robin coefficient by a spectral stochastic finite element approach  

Science Conference Proceedings (OSTI)

This paper investigates a variational approach to the nonlinear stochastic inverse problem of probabilistically calibrating the Robin coefficient from boundary measurements for the steady-state heat conduction. The problem is formulated into an optimization ... Keywords: Conjugate gradient method, Robin inverse problem, Spectral stochastic finite element method, Stochastic inverse problems, Uncertainty quantification

Bangti Jin; Jun Zou

2008-03-01T23:59:59.000Z

451

EPRI-CRIEPI Joint Human Factors Program Summary Report: Joint EPRI-CRIEPI Human Factors Studies  

Science Conference Proceedings (OSTI)

The EPRI-CRIEPI Joint Human Factors Program developed an array of intervention products that provide logical solutions to performance problems confronting nuclear power plant maintenance workers. These products, designed to reduce the incidence of errors and increase productivity, range from job performance cards to a software-based authoring system for training material.

1995-01-24T23:59:59.000Z

452

Berkeley India Joint Leadership on Energy and Environment | Open Energy  

Open Energy Info (EERE)

India Joint Leadership on Energy and Environment India Joint Leadership on Energy and Environment Jump to: navigation, search Logo: Berkeley India Joint Leadership on Energy and Environment Name Berkeley India Joint Leadership on Energy and Environment Agency/Company /Organization Lawrence Berkeley National Laboratory Sector Energy Focus Area Energy Efficiency Topics Policies/deployment programs, Pathways analysis, Background analysis Website http://india.lbl.gov/ Country India Southern Asia References Program Homepage[1] Abstract The Berkeley India Joint Leadership on Energy and Environment (BIJLEE) is a Lawrence Berkeley National Laboratory joint research and development program in which researchers work with the government and private sector of India to assist in the adoption of pathways and approaches for reducing the emissions of greenhouse gases while pursuing sustainable economic development.

453

Comments of the Joint Center for Political and Economic Studies |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Joint Center for Political and Economic Studies Joint Center for Political and Economic Studies Comments of the Joint Center for Political and Economic Studies The Media and Technology Institute and the Climate Change Initiative at the Joint Center for Political and Economic Studies ("Joint Center")1 respectfully submit these comments in response to the United States Department of Energy's ("DoE") Request for Information regarding its implementation of the Smart Grid provisions of Federal Communications Commission's ("FCC") National Broadband Plan. Comments of the Joint Center for Political and Economic Studies More Documents & Publications Re: NBP RFI: Data Access Implementing the National Broadband Plan by Empowering Consumers and the Smart Grid: Data Access, Third Party Use, and Privacy- Request for

454

Tubular spring slip joint and jar  

SciTech Connect

The present invention comprises a pressure balanced tubular spring slip-joint and jar including a generally tubular outer housing having longitudinal slot means in the wall thereof, and a hammer area of increased wall thickness at one end thereof, within which housing slidably extends a jar mandrel means having first and second longitudinally spaced enlarged diameter anvil areas, at least one fastener tapped into one of those anvil areas, the heads of said fastener protruding into said slot means. Both said housing and said mandrel means possesses axial bores therethrough, which are placed in communication via the bore of a tubular spring within the housing, whereby during extension and contraction of the slip-joint and jar means of the present invention the area within said axial bores and said spring bore is of a constant volume. The invention may be employed to provide force impulses in either longitudinal direction, said tubular spring aiding the application of those impulses when said housing and said mandrel means move relatively toward each other. By proper selection of spring length and use of a coiled spring having spaced coils, the present invention may also be employed as a bi-directional shock absorber.

Heemstra, T. R.

1985-04-23T23:59:59.000Z

455

Development of the bus joint for the ITER Central Solenoid  

SciTech Connect

The terminations of the Central Solenoid (CS) modules are connected to the bus extensions by joints located outside the CS in the gap between the CS and Torodial Field (TF) assemblies. These joints have very strict space limitations. Low resistance is a common requirement for all ITER joints. In addition, the CS bus joints will experience and must be designed to withstand significant variation in the magnetic field of several tenths of a Tesla per second during initiation of plasma. The joint resistance is specified to be less than 4 nOhm. The joints also have to be soldered in the field and designed with the possibility to be installed and dismantled in order to allow cold testing in the cold test facility. We have developed coaxial joints that meet these requirements and have demonstrated the feasibility to fabricate and assemble them in the vertical configuration. We introduced a coupling cylinder with superconducting strands soldered to the surface of the cable that can be installed in the ITER assembly hall and at the Cold Test Facility. This cylinder serves as a transition area between the CS module and the bus extension. We made two racetrack samples and tested four bus joints in our Joint Test Apparatus. Resistance of the bus joints was measured by a decay method and by a microvoltmeter; the value of the current was measured by the Hall probes. This measurement method was verified in the previous tests. The resistance of the joints varied insignificantly from 1.5 to 2 nOhm. One of the challenges associated with a soldered joint is the inability to use corrosive chemicals that are difficult to clean. This paper describes our development work on cable preparation, chrome removal, compaction, soldering, and final assembly and presents the test results.

Martovetsky, Nicolai N [ORNL] [ORNL; Irick, David Kim [ORNL] [ORNL; Kenney, Steven J [ORNL] [ORNL

2013-01-01T23:59:59.000Z

456

Development of hip joint prostheses with modular stems  

Science Conference Proceedings (OSTI)

Minimally invasive surgery for THR (Total Hip joint Replacement) is attractive for both surgeons and patients. Since such surgery needs an incision of only 3-4 inches around the hip joint for THR instead of the traditional, large incision of 10-12 inches, ... Keywords: Finite element method, Hip joint replacement, Minimal invasive surgery, Prototypical polymer model, Ti-6Al-4V modular stem

Ji-Yong Bae; Umar Farooque; Kyung-won Lee; Gyu-Ha Kim; Insu Jeon; Taek-Rim Yoon

2011-09-01T23:59:59.000Z

457

NETL: Advanced Research - Successes  

NLE Websites -- All DOE Office Websites (Extended Search)

Successes Successes Advanced Research Successes Sensors & Controls "...Optical grade single-crystal sapphire optical fiber waveguides are especially attractive for fabricating sensors for the harsh high-temperature, corrosive environments found in gasifiers." Read More... "Industry adoption of CCADS will open the door to a new generation of more efficient, ultra-low emission turbines in advanced energy systems" Read More... Bioprocessing " Successful development and commercial application of this environmentally safe bacterial toxin will allow power plants to reduce or eliminate the use of chlorination, reducing the risk of harmful effects on aquatic ecosystems." Advanced Materials " This project will benefit gasification technology development and deployment by improving materials to contain and monitor gasification processes." Read More...

458

Geothermal: Advanced Search  

NLE Websites -- All DOE Office Websites (Extended Search)

Advanced Search Advanced Search Geothermal Technologies Legacy Collection Help/FAQ | Site Map | Contact Us | Admin Log On Home/Basic Search About Publications Advanced Search New Hot Docs News Related Links You may need to turn on Javascript in your browser to use the Find Subject and Find Author features. Sort By: Relevance Publication Date System Entry Date Document Type Title Research Org Sponsoring Org OSTI Identifier Report Number DOE Contract Number Ascending Descending Enter search criteria into as few or as many fields as desired. Search In For Term(s) (Place phrase in "double quotes") All Fields: Bibliographic Data: Full Text: Creator/Author Select : Title: Subject Select : Identifier Numbers: Journal Info.: Conference Info.: Patent Info.: Research Org.: Sponsoring Org.:

459

NIST's Advanced Technology Program  

NLE Websites -- All DOE Office Websites (Extended Search)

NIST's Advanced NIST's Advanced Technology Program NIST's Advanced Technology Program DOE Workshop on Hydrogen Separation and Purification Technologies Arlington, VA, Sept. 8-9, 2004 Jason Huang 301-975-4197 National Institute of Standards and Technology 100 Bureau Drive Stop 4730 Gaithersburg, MD 20899-4730 http://www.atp.nist.gov National Institute of Standards and Technology * Technology Administration * U.S. Department of Commerce ATP is part of NIST Helping America Measure Up NIST Mission ATP is part of NIST NIST Mission: Strengthen the U.S. economy and improve the quality of life by working with industry to develop and apply technology, measurements, and standards. * * * * * * 3,000 employees $771 million annual budget 2,000 field agents 1,800 guest researchers $2.2 billion co-funding of

460

Advanced Hydride Laboratory  

DOE Green Energy (OSTI)

Metal hydrides have been used at the Savannah River Tritium Facilities since 1984. However, the most extensive application of metal hydride technology at the Savannah River Site is being planned for the Replacement Tritium Facility, a $140 million facility schedules for completion in 1990 and startup in 1991. In the new facility, metal hydride technology will be used to store, separate, isotopically purify, pump, and compress hydrogen isotopes. In support of the Replacement Tritium Facility, a $3.2 million, cold,'' process demonstration facility, the Advanced Hydride Laboratory began operation in November of 1987. The purpose of the Advanced Hydride Laboratory is to demonstrate the Replacement Tritium Facility's metal hydride technology by integrating the various unit operations into an overall process. This paper will describe the Advanced Hydride Laboratory, its role and its impact on the application of metal hydride technology to tritium handling.

Motyka, T.

1989-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "advanced joint inversion" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Advanced fuel chemistry for advanced engines.  

SciTech Connect

Autoignition chemistry is central to predictive modeling of many advanced engine designs that combine high efficiency and low inherent pollutant emissions. This chemistry, and especially its pressure dependence, is poorly known for fuels derived from heavy petroleum and for biofuels, both of which are becoming increasingly prominent in the nation's fuel stream. We have investigated the pressure dependence of key ignition reactions for a series of molecules representative of non-traditional and alternative fuels. These investigations combined experimental characterization of hydroxyl radical production in well-controlled photolytically initiated oxidation and a hybrid modeling strategy that linked detailed quantum chemistry and computational kinetics of critical reactions with rate-equation models of the global chemical system. Comprehensive mechanisms for autoignition generally ignore the pressure dependence of branching fractions in the important alkyl + O{sub 2} reaction systems; however we have demonstrated that pressure-dependent 'formally direct' pathways persist at in-cylinder pressures.

Taatjes, Craig A.; Jusinski, Leonard E.; Zador, Judit; Fernandes, Ravi X.; Miller, James A.

2009-09-01T23:59:59.000Z

462

Advanced Simulation and Computing  

National Nuclear Security Administration (NNSA)

NA-ASC-117R-09-Vol.1-Rev.0 NA-ASC-117R-09-Vol.1-Rev.0 Advanced Simulation and Computing PROGRAM PLAN FY09 October 2008 ASC Focal Point Robert Meisner, Director DOE/NNSA NA-121.2 202-586-0908 Program Plan Focal Point for NA-121.2 Njema Frazier DOE/NNSA NA-121.2 202-586-5789 A Publication of the Office of Advanced Simulation & Computing, NNSA Defense Programs i Contents Executive Summary ----------------------------------------------------------------------------------------------- 1 I. Introduction -------------------------------------------------------------------------------------------------------- 2 Realizing the Vision ------------------------------------------------------------------------------------------------- 2 The Future of the Nuclear Weapons Complex ---------------------------------------------------------------- 2

463

Advanced Containment System  

SciTech Connect

An advanced containment system for containing buried waste and associated leachate. The advanced containment system comprises a plurality of casing sections with each casing section interlocked to an adjacent casing section. Each casing section includes a complementary interlocking structure that interlocks with the complementary interlocking structure on an adjacent casing section. A barrier filler substantially fills the casing sections and may substantially fill the spaces of the complementary interlocking structure to form a substantially impermeable barrier. Some of the casing sections may include sensors so that the casing sections and the zone of interest may be remotely monitored after the casing sections are emplaced in the ground.

Kostelnik, Kevin M. (Idaho Falls, ID); Kawamura, Hideki (Tokyo, JP); Richardson, John G. (Idaho Falls, ID); Noda, Masaru (Tokyo, JP)

2005-02-08T23:59:59.000Z

464

Advanced Monitoring systems initiative  

SciTech Connect

The Advanced Monitoring Systems Initiative (AMSI) actively searches for promising technologies and aggressively moves them from the research bench into DOE/NNSA end-user applications. There is a large unfulfilled need for an active element that reaches out to identify and recruit emerging sensor technologies into the test and evaluation function. Sensor research is ubiquitous, with the seeds of many novel concepts originating in the university systems, but at present these novel concepts do not move quickly and efficiently into real test environments. AMSI is a widely recognized, self-sustaining ''business'' accelerating the selection, development, testing, evaluation, and deployment of advanced monitoring systems and components.

R.J. Venedam; E.O. Hohman; C.F. Lohrstorfer; S.J. Weeks; J.B. Jones; W.J. Haas

2004-09-30T23:59:59.000Z

465

Joint Environmental Management System (EMS) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Joint Environmental Management System (EMS) Joint Environmental Management System (EMS) Joint Environmental Management System (EMS) Joint Environmental Management System (EMS) The environmental management system (EMS) has two areas of focus: environmental compliance and environmental sustainability. The environmental compliance aspect of the EMS consists of regulatory compliance and monitoring programs that implement federal, state, local, and tribal requirements; agreements; and permits under the Legacy Management contract. The environmental sustainability aspect promotes and integrates sustainability initiatives such as energy and natural resource conservation, waste minimization, green construction, and use of eco-friendly products and services into all phases of work. U.S. Department of Energy (DOE) Office of Legacy Management (LM) EMS was

466

Joint Working Group for Fusion Safety | Princeton Plasma Physics...  

NLE Websites -- All DOE Office Websites (Extended Search)

Human Resources Environment, Safety & Health Sustainable PPPL Joint Working Group for Fusion Safety Procurement Division Technology Transfer Furth Plasma Physics Library Contact...

467

2010 Joint Effectiveness Review of Hanford Bldg 336 Corrective...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Joint Assessment of the Effectiveness of Corrective Actions for the Building 336 Accident, July 2010 The U.S. Department of Energy, Office of Independent Oversight, within the...

468

Argonne CNM: Joint NSRC Workshop on Nanoparticle Science  

NLE Websites -- All DOE Office Websites (Extended Search)

2012 NSRC Workshop on Nanoparticle Science Joint NSRC Workshop on Nanoparticle Science November 5-6, 2012 Argonne National Laboratory Agenda Posters Report This invitation-only...

469

Joint Actinide Shock Physics Experimental Research Facility Restart...  

NLE Websites -- All DOE Office Websites (Extended Search)

Office of Safety and Emergency Management Evaluations Activity Report for the Joint Actinide Shock Physics Experimental Research Facility Restart Operational Readiness...

470

Optimization Online - A General Heuristic Method for Joint Chance ...  

E-Print Network (OSTI)

Aug 21, 2007 ... A General Heuristic Method for Joint Chance-Constrained Stochastic Programs with Discretely Distributed Parameters. Matthew W. Tanner ...

471

Optimization Online - Threshold Boolean Form for Joint Probabilistic ...  

E-Print Network (OSTI)

Sep 14, 2012 ... Abstract: We develop a new modeling and exact solution method for stochastic programming problems that include a joint probabilistic ...

472

Joint Spectral Radius and Path-Complete Graph Lyapunov Functions  

E-Print Network (OSTI)

Nov 22, 2011 ... Abstract: We introduce the framework of path-complete graph Lyapunov functions for approximation of the joint spectral radius. The approach is ...

473

JOINT SPECTRAL RADIUS AND PATH-COMPLETE GRAPH ...  

E-Print Network (OSTI)

proximation of the joint spectral radius. The approach is based on the analysis of the underlying switched system via inequalities imposed among multiple ...

474

Professional Preface, 4 (1): TMS Approves Five Chapters as Joint ...  

Science Conference Proceedings (OSTI)

At the October 9, 1996, meeting of the TMS Board of Directors, five student chapters were approved as Joint ASM/TMS Student Chapters. They are: University of ...

475

A "joint+marginal" approach to parametric polynomial optimization  

E-Print Network (OSTI)

Jan 13, 2010 ... A "joint+marginal" approach to parametric polynomial optimization. Jean B. Lasserre(lasserre ***at*** laas.fr). Abstract: Given a compact ...

476

DOE Joint Genome Institute: IMG ER Goes Primetime: Provides Expert...  

NLE Websites -- All DOE Office Websites (Extended Search)

that regulate our environment. Scientists at the U.S. Department of Energy (DOE) Joint Genome Institute (JGI) and the Biological Data Management and Technology Center...

477

Joint EFCOG/DOE Chemical Management 2013 Workshop - March 19...  

NLE Websites -- All DOE Office Websites (Extended Search)

3 Workshop Information Health and Safety POSTPONED. Future events will be announced. Joint EFCOGDOE Chemical Management 2013 Workshop March 19-21, 2013 DOE Forrestal...

478

Joint Motion to Intervene of Northern States Power Company (Minnesota...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

States Power Company (Minnesota) et al. on the Proposed Open Access Requirements Joint Motion to Intervene of Northern States Power Company (Minnesota) et al. on the...

479

DOE Joint Genome Institute: JGI's Susannah Tringe Receives Prestigious...  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy (DOE) Office of Science Early Career Research Program has awarded a grant to DOE Joint Genome Institute scientist Susannah Green Tringe to conduct genomic studies of...

480

EMSL: Joint Call for Exploratory Collaborations between EMSL...  

NLE Websites -- All DOE Office Websites (Extended Search)

regarding the proposal format, attachments, and submittal process are unique to this joint Collaborative Science initiative, and returning applicants to either user facility...

Note: This page contains sample records for the topic "advanced joint inversion" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Fatigue Predictions of Various Joints of Magnesium Alloys  

Science Conference Proceedings (OSTI)

Currently, a front shock tower of passenger vehicle is developed with various magnesium alloys and joining methods. To predict the fatigue behavior of the joints ...

482

Failure of railhead material of insulated rail joints.  

E-Print Network (OSTI)

??"Aim of this research is to examine the impact fatigue failure of the railhead of the IRJ [insulated rail joints] and determine actions that can… (more)

Mandal, Nirmal Kumar.

2011-01-01T23:59:59.000Z

483

A coupled model of fluid flow in jointed rock  

SciTech Connect

We present a fully coupled model of fluid flow in jointed rock, where the fluid flow depends on the joint openings and the joint openings depend on the fluid pressure. The joints and rock blocks are modeled discretely using the finite element method. Solutions for the fluid and rock are obtained and iteration is performed until both solutions converge. Example applications include an examination of the effects of back-pressure on flow in a geothermal reservoir and transient fluid injection into a reservoir.

Swenson, Daniel; Martineau, Rick; James, Mark; Brown, Don

1991-01-01T23:59:59.000Z

484

ALCF and MCS Establish Joint Lab for Evaluating Computing Platforms...  

NLE Websites -- All DOE Office Websites (Extended Search)

version To centralize research activities aimed at evaluating future high performance computing platforms, a new joint laboratory at Argonne will provide significant...

485

WEB RESOURCE: Joint Electron Device Enginnering Council - TMS  

Science Conference Proceedings (OSTI)

Feb 12, 2007 ... "The web site of The JEDEC Solid State Technology Association (Once known as the Joint Electron Device Engineering Council). JEDEC is the ...

486

Joint Genome Institute Progress Report 2002-2005  

SciTech Connect

Progress report covering activities at the DOE-Joint Genome Institute in Walnut Creek, California for the period 2002-2005.

Gilbert, David

2005-10-03T23:59:59.000Z

487

Joint Statement by President Barack Obama of the United States...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

and Prime Minister Stephen Harper of Canada on Accelerating Economic Recovery and Job Creation Joint Statement by President Barack Obama of the United States of America and...

488

Joint pricing and inventory control under reference price effects.  

E-Print Network (OSTI)

??In many firms the pricing and inventory control functions are separated. However, a number of theoretical models suggest a joint determination of inventory levels and… (more)

Gimpl-Heersink, Lisa

2008-01-01T23:59:59.000Z

489

Joint Technical Operations Team | National Nuclear Security Administra...  

National Nuclear Security Administration (NNSA)

Joint Technical Operations Team | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response...

490

Joint Actinide Shock Physics Experimental Research Facility Restart...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

and Emergency Management Evaluations Activity Report for the Joint Actinide Shock Physics Experimental Research Facility Restart Operational Readiness Review Pre- Visit Dates...

491

Nuclear Maintenance Applications Center: Bolted Joint Fundamentals  

Science Conference Proceedings (OSTI)

Over the years, EPRI has published various reports that provide guidance on bolting usage. As a result of advancements over time in understanding the problems with bolted assembly makeup as well as human performance, these reports presented sometimes-contradictory recommendations. This report reconciles and consolidates the earlier documents.

2007-12-21T23:59:59.000Z

492

Identifying Isotropic Events Using a Regional Moment Tensor Inversion  

SciTech Connect

We calculate the deviatoric and isotropic source components for 17 explosions at the Nevada Test Site, as well as 12 earthquakes and 3 collapses in the surrounding region of the western US, using a regional time-domain full waveform inversion for the complete moment tensor. The events separate into specific populations according to their deviation from a pure double-couple and ratio of isotropic to deviatoric energy. The separation allows for anomalous event identification and discrimination between explosions, earthquakes, and collapses. Confidence regions of the model parameters are estimated from the data misfit by assuming normally distributed parameter values. We investigate the sensitivity of the resolved parameters of an explosion to imperfect Earth models, inaccurate event depths, and data with low signal-to-noise ratio (SNR) assuming a reasonable azimuthal distribution of stations. In the band of interest (0.02-0.10 Hz) the source-type calculated from complete moment tensor inversion is insensitive to velocity models perturbations that cause less than a half-cycle shift (<5 sec) in arrival time error if shifting of the waveforms is allowed. The explosion source-type is insensitive to an incorrect depth assumption (for a true depth of 1 km), and the goodness-of-fit of the inversion result cannot be used to resolve the true depth of the explosion. Noise degrades the explosive character of the result, and a good fit and accurate result are obtained when the signal-to-noise ratio (SNR) is greater than 5. We assess the depth and frequency dependence upon the resolved explosive moment. As the depth decreases from 1 km to 200 m, the isotropic moment is no longer accurately resolved and is in error between 50-200%. However, even at the most shallow depth the resultant moment tensor is dominated by the explosive component when the data have a good SNR.

Ford, S R; Dreger, D S; Walter, W R

2008-11-04T23:59:59.000Z

493

Advanced Coal Wind Hybrid: Economic Analysis  

E-Print Network (OSTI)

feasibility of combining wind farms with advanced coalfeasibility of combining wind farms with advanced coal

Phadke, Amol

2008-01-01T23:59:59.000Z

494

Joint Institute for Nanoscience Annual Report 2004  

Science Conference Proceedings (OSTI)

Due to the inherently interdisciplinary nature of nanoscience and nanotechnology, research in this arena is often significantly enhanced through creative cooperative activities. The Joint Institute for Nanoscience (JIN) is a venture of the University of Washington (UW) and Pacific Northwest National Laboratory (PNNL) to encourage and enhance high impact and high quality nanoscience and nanotechnology research that leverages the strengths and capabilities of both institutions, and to facilitate education in these areas. This report summarizes JIN award activities that took place during fiscal year 2004 and provides a historical list of JIN awardees, their resulting publications, and JIN-related meetings. Major portions of the JIN efforts and resources are dedicated to funding graduate students and postdoctoral research associates to perform research in collaborations jointly directed by PNNL staff scientists and UW professors. JIN fellowships are awarded on the basis of applications that include research proposals. They have been very successful in expanding collaborations between PNNL and UW, which have led to many excellent joint publications and presentations and enhanced the competitiveness of both institutions for external grant funding. JIN-based interactions are playing a significant role in creating new research directions and reshaping existing research programs at both the UW and PNNL. The JIN also co-sponsors workshops on Nanoscale Science and Technology, four of which have been held in Seattle and one in Richland. In addition to involving PNNL staff in various UW nanoscience courses and seminars, a National Science Foundation grant, Development of UW-PNL Collaborative Curriculums in Nano-Science and Technology, has allowed the development of three intensive short courses that are taught by UW faculty, PNNL staff, and faculty from other institutions, including Washington State University, the University of Idaho, Stanford University, and the University of Alaska. The JIN agreement recognizes that cooperation beyond UW and PNNL is highly valuable. Starting in early 2003, efforts were initiated to form a regional communication link called the Northwest Nanoscience and Nanotechnology Network (N4). In concept, N4 is a tool to encourage communication and help identify regional resources and nanoscience and technology activities.

Baer, Donald R.; Campbell, Charles

2005-02-01T23:59:59.000Z

495

Matrix Inversion Lemma and Information Filter Mohammad Emtiyaz Khan  

E-Print Network (OSTI)

Matrix Inversion Lemma and Information Filter Mohammad Emtiyaz Khan Honeywell Technology Solutions) zt+1|t = (I -JtBT t )A-T t zt|t, Zt+1|t = (I -JtBT t )St (8) where St = A-T t P-1 t|t A-1 t and Jt = StBt(BT t StBt +Q-1 t )-1. The Kalman gain is given as Kt = Zt|tCT t R-1 t . For detailed proof see

Mitchell, Ian

496

Inverse problems for symmetric matrices with a submatrix constraint  

Science Conference Proceedings (OSTI)

This paper is concerned with the following problems: Problem I(a). Given a full column rank matrix X@?R^n^x^p and symmetric matrices B@?R^p^x^p and A"0@?R^r^x^r, find an nxn symmetric matrix A such thatX^TAX=B,A([1,r])=A"0, where A([1,r]) is the rxr ... Keywords: Canonical correlation decomposition, Generalized singular value decomposition, Inverse problem, Least-squares solution, Optimal approximation, Symmetric matrix

Yongxin Yuan; Hua Dai

2007-05-01T23:59:59.000Z

497

Gravitational radiation from primordial helical inverse cascade magnetohydrodynamic turbulence  

SciTech Connect

We consider the generation of gravitational waves by primordial helical inverse-cascade magnetohydrodynamic (MHD) turbulence produced by bubble collisions at the electroweak phase transition. We extend the previous study 1 by considering both currently discussed models of MHD turbulence. For popular electroweak phase transition parameter values, the generated gravitational wave spectrum is only weakly dependent on the MHD turbulence model. Compared with the unmagnetized electroweak phase transition case, the spectrum of MHD-turbulence-generated gravitational waves peaks at lower frequency with larger amplitude and can be detected by the proposed Laser Interferometer Space Antenna.

Kahniashvili, Tina [Department of Physics, Kansas State University, 116 Cardwell Hall, Manhattan, Kansas 66506 (United States); Department of Physics, Laurentian University, Ramsey Lake Road, Sudbury, ON P3E 2C6 (Canada); National Astrophysical Observatory, Ilia Chavchavadze State University, 2A Kazbegi Ave, Tbilisi, GE-0160 (Georgia); Campanelli, Leonardo [Dipartimento di Fisica, Universita di Bari, I-70126 Bari (Italy); INFN - Sezione di Bari, I-70126 Bari (Italy); Gogoberidze, Grigol [Department of Physics, Kansas State University, 116 Cardwell Hall, Manhattan, Kansas 66506 (United States); National Astrophysical Observatory, Ilia Chavchavadze State University, 2A Kazbegi Ave, Tbilisi, GE-0160 (Georgia); Centre for Plasma Astrophysics, K.U. Leuven, Celestijnenlaan 200B, 3001 Leuven (Belgium); Maravin, Yurii; Ratra, Bharat [Department of Physics, Kansas State University, 116 Cardwell Hall, Manhattan, Kansas 66506 (United States)

2008-12-15T23:59:59.000Z

498

The LLNL/UCLA high gradient inverse free electron laser  

SciTech Connect

We describe the Inverse Free Electron Accelerator currently under construction at Lawrence Livermore National Lab. Upon completion of this accelerator, high brightness electrons generated in the photoinjector blowout regime and accelerated to 50 MeV by S-band accelerating sections will interact with > 4 TW peak power Ti:Sapphire laser in a highly tapered 50 cm undulator and experience an acceleration gradient of > 200 MeV/m. We present the final design of the accelerator as well as the results of start-to-end simulations investigating preservation of beam quality and tolerances involved with this accelerator.

Moody, J. T.; Musumeci, P.; Anderson, G.; Anderson, S.; Betts, S.; Fisher, S.; Gibson, D.; Tremaine, A.; Wu, S. [Department of Physics and Astronomy, UCLA, Los Angeles California, 90095 (United States); Lawrence Livermore National Laboratory (United States)

2012-12-21T23:59:59.000Z

499

Advanced turbine systems program  

SciTech Connect

In accordance with the goals of the DOE program, improvements in the gas turbine are the primary focus of Allison activity during Phase I. To this end Allison conducted a survey of potentially applicable gas turbine cycles and selected the advanced combined cycle as reference system. Extensive analysis of two versions of the advanced combined cycle was performed against the requirement for a 60% thermal efficiency (LHV) utility-sized, natural gas fired system. This analysis resulted in technology requirements for this system. Additional analysis determined emissions potential for the system, established a coal-fueled derivative system and a commercialization plan. This report deals with the technical requirements for a system that meets the thermal efficiency goal. Allison initially investigated four basic thermodynamic cycles: Humid air turbine, intercalate-recuperated systems, advanced combined cycle, chemically recuperated cycle. Our survey and cycle analysis indicated that au had the potential of reaching 60% thermal efficiency. We also concluded that engine hot section technology would be a critical technology regardless of which cycle was chosen. Based on this result Allison chose to concentrate on the advanced combined cycle. This cycle is well known and understood by the utility turbine user community and is therefore likely to be acceptable to users.

Wilkes, C.; Mukavetz, D.W.; Knickerbocker, T.K.; Ali, S.A.

1992-12-31T23:59:59.000Z

500

Advanced turbine systems program  

SciTech Connect

In accordance with the goals of the DOE program, improvements in the gas turbine are the primary focus of Allison activity during Phase I. To this end Allison conducted a survey of potentially applicable gas turbine cycles and selected the advanced combined cycle as reference system. Extensive analysis of two versions of the advanced combined cycle was performed against the requirement for a 60% thermal efficiency (LHV) utility-sized, natural gas fired system. This analysis resulted in technology requirements for this system. Additional analysis determined emissions potential for the system, established a coal-fueled derivative system and a commercialization plan. This report deals with the technical requirements for a system that meets the thermal efficiency goal. Allison initially investigated four basic thermodynamic cycles: Humid air turbine, intercalate-recuperated systems, advanced combined cycle, chemically recuperated cycle. Our survey and cycle analysis indicated that au had the potential of reaching 60% thermal efficiency. We also concluded that engine hot section technology would be a critical technology regardless of which cycle was chosen. Based on this result Allison chose to concentrate on the advanced combined cycle. This cycle is well known and understood by the utility turbine user community and is therefore likely to be acceptable to users.

Wilkes, C.; Mukavetz, D.W.; Knickerbocker, T.K.; Ali, S.A.

1992-01-01T23:59:59.000Z