National Library of Energy BETA

Sample records for advanced energy manufacturing

  1. Advanced Manufacturing | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Advanced Manufacturing Advanced Manufacturing EERE leads a robust network of researchers and other partners to continually develop cost-effective energy-saving solutions that help make our country run better through increased efficiency — promoting better plants, manufacturing processes, and products; more efficient new homes and improved older homes; and other solutions to enhance the buildings in which we work, shop, and lead our everyday lives. EERE leads a robust network of researchers

  2. Ohio Advanced Energy Manufacturing Center

    SciTech Connect (OSTI)

    Kimberly Gibson; Mark Norfolk

    2012-07-30

    The program goal of the Ohio Advanced Energy Manufacturing Center (OAEMC) is to support advanced energy manufacturing and to create responsive manufacturing clusters that will support the production of advanced energy and energy-efficient products to help ensure the nation's energy and environmental security. This goal cuts across a number of existing industry segments critical to the nation's future. Many of the advanced energy businesses are starting to make the transition from technology development to commercial production. Historically, this transition from laboratory prototypes through initial production for early adopters to full production for mass markets has taken several years. Developing and implementing manufacturing technology to enable production at a price point the market will accept is a key step. Since these start-up operations are configured to advance the technology readiness of the core energy technology, they have neither the expertise nor the resources to address manufacturing readiness issues they encounter as the technology advances toward market entry. Given the economic realities of today's business environment, finding ways to accelerate this transition can make the difference between success and failure for a new product or business. The advanced energy industry touches a wide range of industry segments that are not accustomed to working together in complex supply chains to serve large markets such as automotive and construction. During its first three years, the Center has catalyzed the communication between companies and industry groups that serve the wide range of advanced energy markets. The Center has also found areas of common concern, and worked to help companies address these concerns on a segment or industry basis rather than having each company work to solve common problems individually. EWI worked with three industries through public-private partnerships to sew together disparate segments helping to promote overall industry health. To aid the overall advanced energy industry, EWI developed and launched an Ohio chapter of the non-profit Advanced Energy Economy. In this venture, Ohio joins with six other states including Colorado, Connecticut, Illinois, Maine, Massachusetts, New Hampshire, Rhode Island and Vermont to help promote technologies that deliver energy that is affordable, abundant and secure. In a more specific arena, EWI's advanced energy group collaborated with the EWI-run Nuclear Fabrication Consortium to promote the nuclear supply chain. Through this project EWI has helped bring the supply chain up to date for the upcoming period of construction, and assisted them in understanding the demands for the next generation of facilities now being designed. In a more targeted manner, EWI worked with 115 individual advanced energy companies that are attempting to bring new technology to market. First, these interactions helped EWI develop an awareness of issues common to companies in different advanced energy sectors. By identifying and addressing common issues, EWI helps companies bring technology to market sooner and at a lower cost. These visits also helped EWI develop a picture of industry capability. This helped EWI provide companies with contacts that can supply commercial solutions to their new product development challenges. By providing assistance in developing supply chain partnerships, EWI helped companies bring their technology to market faster and at a lower cost than they might have been able to do by themselves. Finally, at the most granular level EWI performed dedicated research and development on new manufacturing processes for advanced energy. During discussions with companies participating in advanced energy markets, several technology issues that cut across market segments were identified. To address some of these issues, three crosscutting technology development projects were initiated and completed with Center support. This included reversible welds for batteries and high temperature heat exchangers. It also included a novel advanced weld trainer that EWI has recently commercialized.

  3. Advanced Vehicles Manufacturing Projects | Department of Energy

    Energy Savers [EERE]

    Vehicles Manufacturing Projects Advanced Vehicles Manufacturing Projects Advanced Vehicles Manufacturing Projects Advanced Vehicles Manufacturing Projects Advanced Vehicles Manufacturing Projects Advanced Vehicles Manufacturing Projects Advanced Vehicles Manufacturing Projects Advanced Vehicles Manufacturing Projects Advanced Vehicles Manufacturing Projects Advanced Vehicles Manufacturing Projects DOE-LPO_ATVM-Economic-Growth_Thumbnail.png DRIVING ECONOMIC GROWTH: ADVANCED TECHNOLOGY VEHICLES

  4. Advanced Drivetrain Manufacturing | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Drivetrain Manufacturing Advanced Drivetrain Manufacturing The U.S. Department of Energy (DOE) supports advanced manufacturing techniques that are leading to the "next-generation" of more reliable, affordable, and efficient wind turbine drivetrains. As turbines continue to increase in size, each and every component must also be scaled to meet the demands for renewable energy. What is the Drivetrain? The drivetrain of a wind turbine is composed of the gearbox and the generator, the

  5. Advanced Blade Manufacturing | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Blade Manufacturing Advanced Blade Manufacturing While the blades of a turbine may be one of the most recognizable features of any wind installation, they also represent one of the largest physical challenges in the manufacturing process. Turbine blades can reach up to 75 meters (250 feet) in length, and will continue to increase in size as the demand for renewable energy grows and as wind turbines are deployed offshore. Because of their size and aerodynamic complexity, wind turbine blades are

  6. Advanced Manufacturing Office Overview | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Office Overview Advanced Manufacturing Office Overview PDF icon mw_rf_workshop_july2012.pdf More Documents & Publications Microwave and Radio Frequency Workshop Manufacturing Demonstration Facility Workshop Microwave (MW) and Radio Frequency (RF) as Enabling Technologies for Advanced Manufacturing

  7. Advanced Manufacturing Office | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Advanced Manufacturing Office ISO 50001/SEP Pilot Program - Applications Due 1/8/2016 ISO 50001/SEP Pilot Program - Applications Due 1/8/2016 The U.S. DOE invites applications for a pilot program to help companies implement ISO 50001 and the Superior Energy Performance (SEP) program across multiple facilities throughout North America and worldwide. This pilot program is in partnership with the Commission for Environmental Cooperation and national energy agencies in Canada, Mexico, and the United

  8. Advanced Manufacturing Office | Department of Energy

    Energy Savers [EERE]

    Advanced Manufacturing Office ISO 50001SEP Pilot Program - Applications Due 182016 ISO 50001SEP Pilot Program - Applications Due 182016 The U.S. DOE invites applications for...

  9. Chapter 6: Innovating Clean Energy Technologies in Advanced Manufacturing | Additive Manufacturing Technology Assessment

    Office of Environmental Management (EM)

    6: Innovating Clean Energy Technologies in Advanced Manufacturing Technology Assessments Additive Manufacturing Advanced Materials Manufacturing Advanced Sensors, Controls, Platforms and Modeling for Manufacturing Combined Heat and Power Systems Composite Materials Critical Materials Direct Thermal Energy Conversion Materials, Devices, and Systems Materials for Harsh Service Conditions Process Heating Process Intensification Roll-to-Roll Processing Sustainable Manufacturing - Flow of Materials

  10. Office of Energy Efficiency & Renewable Energy Advanced Manufacturing Office

    Energy Savers [EERE]

    Office of Energy Efficiency & Renewable Energy Advanced Manufacturing Office Quadrennial Technology Review (QTR): Technology Assessment - Sustainable Manufacturing/Flow of Materials Through Industry Joe Cresko - joe.cresko@ee.doe.gov Sustainable Manufacturing Workshop Portland, OR January 6, 2016 2 Quadrennial Technology Review-2015 hOp://www.energy.gov/quadrennial-technology-review-2015 The QTR is a comprehensive assessment of science and energy technology R&D opportuniHes to address

  11. Chapter 6: Innovating Clean Energy Technologies in Advanced Manufacturing

    Office of Environmental Management (EM)

    6: Innovating Clean Energy Technologies in Advanced Manufacturing September 2015 Quadrennial Technology Review 6 Innovating Clean Energy Technologies in Advanced Manufacturing Issues and RDD&D Opportunities  Manufacturing affects the way products are designed, fabricated, used, and disposed; hence, manufacturing technologies have energy impacts extending beyond the industrial sector.  Life-cycle analysis is essential to assess the total energy impact of a manufactured product. 

  12. U.S. Advanced Manufacturing and Clean Energy Technology Challenges

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Advanced Manufacturing and Clean Energy Technology Challenges May 6, 2014 AMO Peer Review Mark Johnson Director Advanced Manufacturing Office www.manufacturing.energy.gov This presentation does not contain any proprietary, confidential, or otherwise restricted information. 2 Outline * Big Picture on Manufacturing in US * Focus on Advanced Manufacturing * AMO Organization * Technical Assistance * R&D Facilities * R&D Projects * Goals for Meeting 3 Products invented here, now made

  13. Advanced Manufacturing: Using Composites for Clean Energy | Department of

    Energy Savers [EERE]

    Energy Advanced Manufacturing: Using Composites for Clean Energy Advanced Manufacturing: Using Composites for Clean Energy Advanced fiber-reinforced polymer composites, which combine strong fibers with tough plastics, are lighter and stronger than steel. These materials could lower overall production costs in U.S. manufacturing and ultimately drive the adoption of a new clean energy way of life. Below is the text version of the video above. The video opens with the title, "Advanced

  14. U.S. Advanced Manufacturing and Clean Energy Technology Challenges

    Energy Savers [EERE]

    U.S. Advanced Manufacturing and Clean Energy Technology Challenges May 6, 2014 AMO Peer ... & Programs: Pilar Thomas * Office of Nuclear Energy: Martha Shields, Alison Hahn, ...

  15. Advanced Methods for Manufacturing | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Methods for Manufacturing Advanced Methods for Manufacturing The overall purpose of the AMM subprogram is to accelerate innovations that reduce the cost and schedule of constructing new nuclear plants and make fabrication of nuclear power plant components faster, cheaper, and more reliable. Based on past industry work and new stakeholder input, this effort will focus on opportunities that provide simplified, standardized, and labor-saving outcomes for manufacturing, fabrication, assembly, and

  16. Advanced Manufacturing Office and Potential Technologies for Clean Energy Manufacturing Innovation

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    | Energy Efficiency and Renewable Energy eere.energy.gov Mark Johnson Director Advanced Manufacturing Office www.manufacturing.energy.gov Advanced Manufacturing Office and Potential Technologies for Clean Energy Manufacturing Innovation October 8, 2014 DOE/DOD Planning Workshop- Fort Worth, TX 2 1. Background on DOE and Manufacturing 2. Technical Assistance 3. R & D Projects 4. Manufacturing R & D Facilities 5. Workshop Meta-Questions and Ground Rules Status Quo: Products invented here,

  17. Contacts for the Advanced Manufacturing Office | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Contacts for the Advanced Manufacturing Office Contacts for the Advanced Manufacturing Office Welcome to the Advanced Manufacturing Office (AMO). Our address, email, and phone number are provided below. U.S. Department of Energy - Advanced Manufacturing Office (formerly Industrial Technologies Program) Room 5F-065, MS EE-5A 1000 Independence Ave, SW Washington, DC 20585 Phone: (202) 586-9488 Nearest Metro stop: Smithsonian (blue/orange line) Get directions Website Contact: Send us your comments,

  18. Chapter 6: Innovating Clean Energy Technologies in Advanced Manufactur...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... from publicly available module price data rather than the calculations described in endnote 78. Acronyms AMO Advanced Manufacturing Office (of the Department of Energy) IUPAC ...

  19. Changing the Advanced Energy Manufacturing Game in America's Heartland |

    Office of Environmental Management (EM)

    Department of Energy Advanced Energy Manufacturing Game in America's Heartland Changing the Advanced Energy Manufacturing Game in America's Heartland December 16, 2010 - 9:32am Addthis Andy Oare Andy Oare Former New Media Strategist, Office of Public Affairs What does this mean for me? Clean energy manufacturing is expanding across the Midwest. This was spurred in large part by the Advanced Energy Manufacturing Tax Credit, also known as 48C, which was part of the Recovery Act. The $2.3

  20. Advanced Manufacturing Office Update, January 2015 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    January 2015 Advanced Manufacturing Office Update, January 2015 January 26, 2015 - 2:00pm Addthis In This Issue Featured Articles Expert Panel Releases Final Report on Strengthening Advanced Manufacturing in America 3D Printed Shelby Cobra Demonstrates Further Advances in Additive Manufacturing Partners in the Spotlight Legrand Energy Marathon Leads to Big Savings Better Plants Welcomes First Five Wastewater Treatment Partners Third Volvo Facility Certified to Superior Energy Performance Honda

  1. Energy Department Trains Veterans in Advanced Manufacturing | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Trains Veterans in Advanced Manufacturing Energy Department Trains Veterans in Advanced Manufacturing August 15, 2014 - 11:30am Addthis Deputy Secretary of Energy Daniel Poneman addresses attendees at a ceremony at Pellissippi State Community College on August 15, 2014. | Energy Department file photo. Deputy Secretary of Energy Daniel Poneman addresses attendees at a ceremony at Pellissippi State Community College on August 15, 2014. | Energy Department file photo. NEWS MEDIA CONTACT

  2. Advanced Manufacturing Office Update, September 2014 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    September 2014 Advanced Manufacturing Office Update, September 2014 September 18, 2014 - 4:34pm Addthis In This Issue Featured Article Veterans Receive Valuable Advanced Manufacturing Training under AMO-Sponsored Internship Partners in the Spotlight Iowa Water and Wastewater Operators Seek SEP Certification in New Pilot Program Darigold Steps Up to the Better Plants Challenge Velocys Advances Small-Scale Gas-to-Liquid Technology with AMO Support HARBEC's $52,000 Annual Energy Savings under SEP

  3. Advanced Manufacturing Office Update, January 2015 | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Articles Expert Panel Releases Final Report on Strengthening Advanced Manufacturing in America 3D Printed Shelby Cobra Demonstrates Further Advances in Additive Manufacturing Partners in the Spotlight Legrand Energy Marathon Leads to Big Savings Better Plants Welcomes First Five Wastewater Treatment Partners Third Volvo Facility Certified to Superior Energy Performance Honda Recognizes Bridgestone Facility with Three Environmental Achievement Awards AMO and Industry News Save the Date for the

  4. Chapter 6: Innovating Clean Energy Technologies in Advanced Manufacturing | Advanced Sensors, Controls, Platforms and Modeling for Manufacturing Technology Assessment

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Advanced Sensors, Controls, Platforms and Modeling for Manufacturing Chapter 6: Technology Assessments NOTE: This technology assessment is available as an appendix to the 2015 Quadrennial Technology Review (QTR). Advanced Sensors, Controls, Platforms and Modeling for Manufacturing is one of fourteen manufacturing-focused technology assessments prepared in support of Chapter 6: Innovating Clean Energy Technologies in Advanced Manufacturing. For context within the 2015 QTR, key connections between

  5. Advanced Manufacturing Office Overview

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    DOE Workshop: Microwave (MW) and Radio Frequency (RF) as Enabling Technologies for Advanced Manufacturing Venue: The 2nd Global Congress on Microwave Energy Applications (2GCMEA) July 25, 2012 Long Beach Hilton Long Beach, CA Advanced Manufacturing Office U.S. Department of Energy Rob Ivester Acting Deputy Program Manager, Advanced Manufacturing Office Advanced Manufacturing Office Advanced Manufacturing Office Agenda Time Activity 2:00-2:30 PM Opening Session - AMO o Presentation of Industry

  6. Advanced Manufacturing Office Update January 2016 | Department of Energy

    Office of Environmental Management (EM)

    Update January 2016 Advanced Manufacturing Office Update January 2016 February 2, 2016 - 4:36pm Addthis In this Issue Partner Spotlight AMO Technology Advances Wind Turbine Research Hilton Joins Superior Energy Performance Partners AMO Success Stories Innovators Find a Home with Cyclotron Road Manufacturing Industry's Role in Grid Modernization The Future of Robotics Scholars IACMI Announces Summer Internship Program A Message from the Director Johnson_280x210.jpg Dear friends of AMO, The

  7. Energy Revolving Loan Fund - Clean Energy Advanced Manufacturing...

    Broader source: Energy.gov (indexed) [DOE]

    this program is available to small businesses located in Michigan who are seeking to invest and diversify in clean energy sectors, manufacturing renewable energy and energy...

  8. A National Strategic Plan For Advanced Manufacturing | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    A National Strategic Plan For Advanced Manufacturing A National Strategic Plan For Advanced Manufacturing PDF icon nstc_feb2012.pdf More Documents & Publications Report to the President on Ensuring American Leadership in Advanced Manufacturing National Network for Manufacturing Innovation: A Preliminary Design National Network for Manufacturing Innovation: A Preliminary Design

  9. Advanced Manufacturing Office Update, November 2014 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    November 2014 Advanced Manufacturing Office Update, November 2014 November 13, 2014 - 12:00pm Addthis In This Issue Featured Articles Better Plants Partners Celebrated at National Conference World's First 3D Printed Car Shows Additive Manufacturing Has Come of Age Partners in the Spotlight Schneider Electric Achieves Superior Energy Performance at Five Facilities O'Fallon Casting, Oshkosh Corporation, Oregon Freeze Dry, and Richmond Industries Join Better Plants Holcim (US) Inc. Steps up to the

  10. Innovative Manufacturing Initiative Recognition Day, Advanced Manufacturing

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Office (AMO) | Department of Energy Day, Advanced Manufacturing Office (AMO) Innovative Manufacturing Initiative Recognition Day, Advanced Manufacturing Office (AMO) PDF icon imi_recogitionday_leo_june2012.pdf More Documents & Publications Innovative Manufacturing Initiative Recognition Day Advanced Manufacturing Office Overview Unlocking the Potential of Additive Manufacturing in the Fuel Cells Industry

  11. Advanced Manufacturing Office, U.S. Department of Energy | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Office, U.S. Department of Energy Advanced Manufacturing Office, U.S. Department of Energy PDF icon Workshop Overview - Leo Christodoulou, DOE Advanced Manufacturing Office More Documents & Publications Sustainable Nanomaterials Workshop Innovative Manufacturing Initiative Recognition Day, Advanced Manufacturing Office (AMO) Innovative Manufacturing Initiative Recognition Day

  12. Advanced Manufacturing Office, U.S. Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... NSF Engineering Research Centers NSF IUCR Centers NSF IUCR Centers SBIRSTTR SBIRSTTR NIST Manufacturing Extension Partnership NIST Manufacturing Extension Partnership Advanced ...

  13. Sandia Energy - Institute for Advanced Composites Manufacturing...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    in East Tennessee and nationally. The five-year IACMI technical goals include a 25% lower carbon fiber-reinforced polymer (CFRP) cost, a 50% reduction in CFRP embodied energy,...

  14. Advanced Manufacturing Office Update, March 2015 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    March 2015 Advanced Manufacturing Office Update, March 2015 March 30, 2015 - 3:13pm Addthis In This Issue Featured Articles Better Plants Welcomes New Partners from Diverse Sectors Better Plants Challenge Partners Share Energy-Saving Solutions Harbec Receives 2014 Environmental Excellence Award from New York State AMO and Industry News Heat Exchange Materials Research Advances Accomplishments Highlighted at Critical Materials Institute Annual Peer Review Benefits of Combined Heat and Power

  15. Chapter 6: Innovating Clean Energy Technologies in Advanced Manufactur...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... (http:www.energy.goveereamostatic-sankey-diagram-proces... (http:www.energy.goveereamodynamic-manufacturing-energy-... Engineering Scoping Study of Thermoelectric ...

  16. 48C Phase II Advanced Energy Manufacturing Tax Credit Program Selections

    Broader source: Energy.gov [DOE]

    The Departments of Energy and the Treasury worked in partnership to develop, launch, and award the funds for 48C Advanced Energy Manufacturing Tax Credit program.  The Advanced Energy Manufacturing...

  17. Advanced Manufacturing Office, U.S. Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    manufacturing methods can change the landscape Advanced Manufacturing Office Innovation Can Change the World 1884: The price of aluminum was 1oz and the price of gold was 20oz. ...

  18. Manufacturing Innovation Institute for Smart Manufacturing: Advanced

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Sensors, Controls, Platforms, and Modeling for Manufacturing | Department of Energy Manufacturing Innovation Institute for Smart Manufacturing: Advanced Sensors, Controls, Platforms, and Modeling for Manufacturing Manufacturing Innovation Institute for Smart Manufacturing: Advanced Sensors, Controls, Platforms, and Modeling for Manufacturing September 23, 2015 - 2:38pm Addthis Posted Date: Sep 15, 2015 Original Closing Date for Applications: Jan 29, 2016 A mandatory Concept Paper is due

  19. Advanced Manufacturing for a U.S. Clean Energy Economy (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2012-03-01

    This fact sheet is an overview of the U.S. Department of Energy's Advanced Manufacturing Office. Manufacturing is central to our economy, culture, and history. The industrial sector produces 11% of U.S. gross domestic product (GDP), employs 12 million people, and generates 57% of U.S. export value. However, U.S. industry consumes about one-third of all energy produced in the United States, and significant cost-effective energy efficiency and advanced manufacturing opportunities remain unexploited. As a critical component of the National Innovation Policy for Advanced Manufacturing, the U.S. Department of Energy's (DOE's) Advanced Manufacturing Office (AMO) is focused on creating a fertile environment for advanced manufacturing innovation, enabling vigorous domestic development of transformative manufacturing technologies, promoting coordinated public and private investment in precompetitive advanced manufacturing technology infrastructure, and facilitating the rapid scale-up and market penetration of advanced manufacturing technologies.

  20. Manufacturing Innovation Institute for Smart Manufacturing: Advanced...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Manufacturing Innovation Institute for Smart Manufacturing: Advanced Sensors, Controls, Platforms, and Modeling for Manufacturing Manufacturing Innovation Institute for Smart...

  1. Project Profile: Advanced Manufacture of Reflectors | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Manufacture of Reflectors Project Profile: Advanced Manufacture of Reflectors University of Arizona logo The University of Arizona and its partners, under the 2012 Concentrating Solar Power (CSP) SunShot R&D funding opportunity announcement (FOA), are developing technology to improve the optical accuracy and reflectivity of the self-supporting glass mirrors used in CSP collector systems. Approach The research team is working to optimize and validate a novel glass-molding technique that

  2. Advanced Materials Manufacturing (AMM) Session

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Eric Miller Department of Energy (DOE) Office of Energy Efficiency and Renewable Energy (EERE) Fuel Cells Technology Office (FTCO) DOE and DoD Multi-topic Workshop Advanced Materials Manufacturing (AMM) Session Fort Worth, TX October 9, 2014 Advanced Materials Manufacturing (AMM) Institute Stakeholders Workshop Advanced Manufacturing Office (AMO) manufacturing.energy.gov 2 WELCOME & THANK YOU! from your friendly support staff: Eric Miller, David Forrest, Fred Crowson, Jessica Savell...

  3. Advanced Manufacturing Office News

    SciTech Connect (OSTI)

    2013-08-08

    News stories about advanced manufacturing, events, and office accomplishments. Subscribe to receive updates.

  4. Selected Activities of the Office of Energy Efficiency and Renewable Energy's Advanced Manufacturing Office

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AUDIT REPORT Selected Activities of the Office of Energy Efficiency and Renewable Energy's Advanced Manufacturing Office OAS-RA-14-04 June 2014 U.S. Department of Energy Office of Inspector General Office of Audits and Inspections Department of Energy Washington, DC 20585 June 17, 2014 MEMORANDUM FOR THE ASSISTANT SECRETARY FOR ENERGY EFFICIENCY AND RENEWABLE ENERGY FROM: Rickey R. Hass Deputy Inspector General for Audits and Inspections Office of Inspector General SUBJECT: INFORMATION: Audit

  5. 48C Phase II Advanced Energy Manufacturing Tax Credit Program Fact Sheet

    Broader source: Energy.gov [DOE]

    The 48C Advanced Energy Manufacturing Tax Credit program was initiated under the American Recovery and Reinvestment Act of 2009 to support investments in projects that establish, expand or re-equip...

  6. Advanced Technology Vehicles Manufacturing Incentive Program | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy Technology Vehicles Manufacturing Incentive Program Advanced Technology Vehicles Manufacturing Incentive Program A fact sheet detailling the advanced technology vehicles manufacturing incentive program. PDF icon Advanced Technology Vehicles Manufacturing Incentive Program More Documents & Publications Advanced Technology Vehicles Manufacturing Incentive Program MEMA: Comments MEMA: Letter

  7. Chapter 6: Innovating Clean Energy Technologies in Advanced Manufactur...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... 5 For the manufacture of printed flexible organic photovoltaics (OPV) used in solar cells, the VTT Technical Research Centre (of Finland) has developed an R2R wet deposition ...

  8. advanced manufacturing office | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Advanced Manufacturing Office The U.S. Department of Energy (DOE) funds the research, development, and demonstration of highly efficient and innovative manufacturing technologies....

  9. Chapter 6: Innovating Clean Energy Technologies in Advanced Manufacturing | Composite Materials Technology Assessment

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Composite Materials Chapter 6: Technology Assessments This technology assessment is available as an appendix to the 2015 Quadrennial Technology Review (QTR). Composite Materials is one of fourteen manufacturing-focused technology assessments prepared in support of Chapter 6: Innovating Clean Energy Technologies in Advanced Manufacturing. For context within the 2015 QTR, key connections between this technology assessment, other QTR technology chapters, and other Chapter 6 technology assessments

  10. Chapter 6: Innovating Clean Energy Technologies in Advanced Manufacturing | Critical Materials Technology Assessment

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Critical Materials Chapter 6: Technology Assessments NOTE: This technology assessment is available as an appendix to the 2015 Quadrennial Technology Review (QTR). Critical Materials is one of fourteen manufacturing-focused technology assessments prepared in support of Chapter 6: Innovating Clean Energy Technologies in Advanced Manufacturing. For context within the 2015 QTR, key connections between this technology assessment, other QTR technology chapters, and other Chapter 6 technology

  11. Chapter 6: Innovating Clean Energy Technologies in Advanced Manufacturing | Process Intensification Technology Assessment

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Process Intensification Chapter 6: Technology Assessments NOTE: This technology assessment is available as an appendix to the 2015 Quadrennial Technology Review (QTR). Process Intensification is one of fourteen manufacturing-focused technology assessments prepared in support of Chapter 6: Innovating Clean Energy Technologies in Advanced Manufacturing. For context within the 2015 QTR, key connections between this technology assessment, other QTR technology chapters, and other Chapter 6 technology

  12. Advanced Manufacturing Office: Case Study - The Challenge: Improving Ventilation System Energy Efficiency in a Textile Plant

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Cotton Fabric Process: Facility Ventilation System: Ventilation Fans Technology: Variable Frequency Drives (VFDs) Project Profile U.S. Department of Energy - Energy Efficiency and Renewable Energy Advanced Manufacturing Office Case Study - The Challenge: Improving Ventilation System Energy Efficiency in a Textile Plant Summary Company Background Project Overview Project Team The Systems Approach Project Implementation Results Lessons Learned Summary In an effort to improve ventilation system

  13. AMO Announces Funding Opportunity for Low-Cost, Energy Efficient Manufacturing and Recycling of Advanced Fiber-Reinforced Polymer Composites

    Broader source: Energy.gov [DOE]

    A new Advanced Composite Manufacturing Institute, one of six National Network for Manufacturing Innovation Institutes to launch in 2014, will receive up to $70 million over five years in Energy Department funding.

  14. Weekly Announcements from the Advanced Manufacturing Office, March 2, 2016

    Broader source: Energy.gov [DOE]

    Summary of weekly announcements from the Office of Energy Efficiency and Renewable Energy's Advanced Manufacturing Office

  15. Advanced Methods for Manufacturing Newslettter- Issue 3

    Broader source: Energy.gov [DOE]

    The Advanced Methods for Manufacturing newsletter includes information about selected projects pertaining to additive manufacturing, concrete technologies, welding innovations and imaging techniques for design reconstruction currently funded by the Department of Energy's Office of Nuclear Energy.

  16. The Advanced Manufacturing Partnership and the Advanced Manufacturing...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Facility Workshop Manufacturing Demonstration Facilities Workshop, March 12, 2012 Report to the President on Capturing Domestic Competitive Advantage in Advanced Manufacturing...

  17. Clean Energy Manufacturing Initiative

    SciTech Connect (OSTI)

    2013-04-01

    The initiative will strategically focus and rally EEREs clean energy technology offices and Advanced Manufacturing Office around the urgent competitive opportunity for the United States to be the leader in the clean energy manufacturing industries and jobs of today and tomorrow.

  18. Advanced Manufacture of Reflectors

    Office of Energy Efficiency and Renewable Energy (EERE)

    The Advance Manufacture of Reflectors fact sheet describes a SunShot Initiative project being conducted research team led by the University of Arizona, which is working to develop a novel method for shaping float glass. The technique developed by this research team can drastically reduce the time required for the shaping step. By enabling mass production of solar concentrating mirrors at high speed, this project should lead to improved performance and as much as a 40% reduction in manufacturing costs for reflectors made in very high volume.

  19. advanced manufacturing office | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Advanced Manufacturing Office The U.S. Department of Energy (DOE) funds the research, development, and demonstration of highly efficient and innovative manufacturing technologies. DOE has supported the development of more than 250 energy-saving industrial technologies that have been commercialized since 1976. DOE is also working to create a network of Manufacturing Innovation Institutes, each of which will create collaborative communities to target a unique technology in advanced manufacturing.

  20. clean energy manufacturing | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Clean Energy Manufacturing Initiative The Clean Energy Manufacturing Initiative is a strategic integration and commitment of manufacturing efforts across the DOE Office of Energy Efficiency & Renewable Energy's (EERE's) clean energy technology offices and Advanced Manufacturing Office, focusing on American competitiveness in clean energy manufacturing. Clean Energy Manufacturing Initiative: http://www1.eere.energy.gov/energymanufacturing

  1. Clean Energy Manufacturing Initiative: Technology Research and...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Clean Energy Manufacturing Initiative: Technology Research and Development Clean Energy ... The Office of Nuclear Energy's Advanced Methods for Manufacturing subprogram accelerates ...

  2. Advanced Manufacturing Initiative Improves Turbine Blade Productivity |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Manufacturing Initiative Improves Turbine Blade Productivity Advanced Manufacturing Initiative Improves Turbine Blade Productivity May 20, 2011 - 2:56pm Addthis This is an excerpt from the Second Quarter 2011 edition of the Wind Program R&D Newsletter. The Advanced Manufacturing Initiative (AMI) at DOE's Sandia National Laboratories is working with industry to improve manufacturing processes and create U.S. jobs by improving labor productivity in wind turbine blade

  3. Driving Economic Growth: Advanced Technology Vehicles Manufacturing |

    Office of Environmental Management (EM)

    Department of Energy Driving Economic Growth: Advanced Technology Vehicles Manufacturing Driving Economic Growth: Advanced Technology Vehicles Manufacturing With $8 billion in loans and commitments to projects that have supported the production of more than 4 million fuel-efficient cars and more than 35,000 direct jobs across eight states, the Advanced Technology Vehicles Manufacturing (ATVM) loan program has played a key role in helping the American auto industry propel the resurgence of

  4. Innovative Manufacturing Initiative Recognition Day, Advanced...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    More Documents & Publications Innovative Manufacturing Initiative Recognition Day Advanced Manufacturing Office Overview Unlocking the Potential of Additive Manufacturing in the ...

  5. Advanced Materials Manufacturing and Innovative Technologies...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ...) - Challenges: * Manufacturing Methodology MUST be Able to Deliver Required ... Research Opportunities & Challenges Advanced Materials Manufacturing & Innovative ...

  6. The Clean Energy Manufacturing Initiative

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    by ensuring critical feedback from the production phase to invention and discovery. Additive manufacturing is just one of several technologies advanced by the Energy...

  7. 3 Reasons Why Advanced Manufacturing Institutes Matter | Department of

    Energy Savers [EERE]

    Energy Reasons Why Advanced Manufacturing Institutes Matter 3 Reasons Why Advanced Manufacturing Institutes Matter February 1, 2016 - 3:06pm Addthis Watch how manufacturing Institutes like the Institute for Advanced Composites Manufacturing Innovation are revolutionizing America's clean energy economy. Paul Lester Paul Lester Digital Content Specialist, Office of Public Affairs KEY FACTS National Network for Manufacturing Innovation aims to drive down the cost of advanced manufacturing

  8. Advanced Manufacturing Technician

    Broader source: Energy.gov [DOE]

    Alternate Title(s):Manufacturing Production Technician; Electro-Mechanical Technician; Electronics Maintenance Technician

  9. Advanced Manufacturing Office: Case Study - The Challenge: Improving the Performance of a Waste-To-Energy Facility

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Refuse Systems Process: Resource Recovery (Solid Waste- to-Energy) System: Induced Draft Fan Technology: VFD Retrofit Project Profile SIC: 4953 Products: Electricity, waste reduction Southeast Resource Recovery Facility U.S. Department of Energy - Energy Efficiency and Renewable Energy Advanced Manufacturing Office Case Study - The Challenge: Improving the Performance of a Waste-To-Energy Facility Summary Plant Overview Project Background Project Team The Old System Project Implementation The

  10. Advanced Methods for Manufacturing Newsletter - Issue 2 | Department of

    Energy Savers [EERE]

    Energy Methods for Manufacturing Newsletter - Issue 2 Advanced Methods for Manufacturing Newsletter - Issue 2 The Advanced Methods for Manufacturing (AMM) newsletter includes information about selected projects pertaining to additive manufacturing, concrete technologies, and welding innovations currently funded by the Department of Energy's Office of Nuclear Energy. PDF icon NEET-Advanced Methods for Manufacturing-Newsletter Issue 2.pdf More Documents & Publications FY 2015 Advanced

  11. Advanced Methods for Manufacturing

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Scientists Computational Resources and Multi- Physics Modeling & Simulation Knowledge & ... Manufacturing Methods R&D Test Bed ... loops, process development...

  12. Chapter 6: Innovating Clean Energy Technologies in Advanced Manufacturing | Wide Bandgap Semiconductors for Power Electronics Technology Assessment

    Energy Savers [EERE]

    Wide Bandgap Semiconductors for Power Electronics Chapter 6: Technology Assessments NOTE: This technology assessment is available as an appendix to the 2015 Quadrennial Technology Review (QTR). Wide Bandgap Semiconductors for Power Electronics is one of fourteen manufacturing-focused technology assessments prepared in support of Chapter 6: Innovating Clean Energy Technologies in Advanced Manufacturing. For context within the 2015 QTR, key connections between this technology assessment, other QTR

  13. Chapter 6: Innovating Clean Energy Technologies in Advanced Manufacturing | Combined Heat and Power Systems Technology Assessment

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Platforms and Modeling for Manufacturing Combined Heat and Power Systems Composite Materials Critical Materials Direct Thermal Energy Conversion Materials, Devices, and Systems Materials for Harsh Service Conditions Process Heating Process Intensification Roll-to-Roll Processing Sustainable Manufacturing - Flow of Materials through Industry Waste Heat Recovery Systems Wide Bandgap Semiconductors for Power Electronics ENERGY U.S. DEPARTMENT OF Quadrennial Technology Review 2015 1 Quadrennial

  14. Chapter 6: Innovating Clean Energy Technologies in Advanced Manufacturing | Materials for Harsh Service Conditions Technology Assessment

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    and Modeling for Manufacturing Combined Heat and Power Systems Composite Materials Critical Materials Direct Thermal Energy Conversion Materials, Devices, and Systems Materials for Harsh Service Conditions Process Heating Process Intensification Roll-to-Roll Processing Sustainable Manufacturing - Flow of Materials through Industry Waste Heat Recovery Systems Wide Bandgap Semiconductors for Power Electronics ENERGY U.S. DEPARTMENT OF Quadrennial Technology Review 2015 1 Quadrennial Technology

  15. Advanced Battery Manufacturing Facilities and Equipment Program |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy 1 DOE Hydrogen and Fuel Cells Program, and Vehicle Technologies Program Annual Merit Review and Peer Evaluation PDF icon arravt002_es_flicker_2011_p.pdf More Documents & Publications Advanced Battery Manufacturing Facilities and Equipment Program Advanced Battery Manufacturing Facilities and Equipment Program Fact Sheet: Grid-Scale Energy Storage Demonstration Using UltraBattery Technology (August 2013)

  16. Upcoming Clean Energy Manufacturing Initiative (CEMI) Southeast...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Showcase innovations in clean energy technology manufacturing and advanced manufacturing ... The Southeast Regional Summit is free of charge and open to the public. Register to attend ...

  17. Office\tof\tEnergy\tEfficiency\t&\tRenewable\tEnergy Advanced\tManufacturing...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    potenYal and enabling science of key technologies out to ... thin- and thick-film substrate producAon; mulAlayer alignment * Sustainable Manufacturing Materials for ...

  18. Advanced Manufacture of Reflectors

    SciTech Connect (OSTI)

    Angel, Roger

    2014-12-17

    The main project objective has been to develop an advanced gravity sag method for molding large glass solar reflectors with either line or point focus, and with long or short focal length. The method involves taking standard sized squares of glass, 1.65 m x 1.65 m, and shaping them by gravity sag into precision steel molds. The method is designed for high volume manufacture when incorporated into a production line with separate pre-heating and cooling. The performance objectives for the self-supporting glass mirrors made by this project include mirror optical accuracy of 2 mrad root mean square (RMS), requiring surface slope errors <1 mrad rms, a target not met by current production of solar reflectors. Our objective also included development of new methods for rapidly shaping glass mirrors and coating them for higher reflectivity and soil resistance. Reflectivity of 95% for a glass mirror with anti-soil coating was targeted, compared to the present ~94% with no anti-soil coating. Our mirror cost objective is ~$20/m2 in 2020, a significant reduction compared to the present ~$35/m2 for solar trough mirrors produced for trough solar plants. During the first year a custom batch furnace was built to develop the method with high power radiative heating to simulate transfer of glass into a hot slumping zone in a production line. To preserve the original high polish of the float glass on both front and back surfaces, as required for a second surface mirror, the mold surface is machined to the required shape as grooves which intersect the glass at cusps, reducing the mold contact area to significantly less than 1%. The mold surface is gold-plated to reflect thermal radiation. Optical metrology of glass replicas made with the system has been carried out with a novel, custom-built test system. This test provides collimated, vertically-oriented parallel beams from a linear array of co-aligned lasers translated in a perpendicular direction across the reflector. Deviations of each reflected beam from the paraboloid focus give a direct measure of surface slope error. Key findings A gravity sag method for large (2.5 m2) second surface glass solar reflectors has been developed and demonstrated to a uniquely high level of accuracy. Mirror surface slope accuracy of 0.65 mrad in one dimension, 0.85 mrad in 2 dimensions (point focus) has been demonstrated by commercial partner REhnu using this process. This accuracy exceeds by a factor of two current solar reflector accuracy. Our replicas meet the Sunshot accuracy objective of 2 mrad optical, which requires better than 1 mrad rms slope error. Point-focus as well as line-focus mirrors have been demonstrated at 1.65 m x 1.65 m square a unique capability. The new process using simple molds is economical. The molds for the 1.65 m square reflectors are bent and machined steel plates on a counter-weighted flotation support. To minimize thermal coupling by radiative heat transfer, the mold surface is grooved and gilded. The molds are simple to manufacture, and have minimal thermal stresses and distortion in use. Lapping and bending techniques have been developed to obtain better than 1 mrad rms surface mold accuracy. Float glass is sagged into the molds by rapid radiative heating, using a custom high power (350 kW) furnace. The method of manufacture is well suited for small as well as large volume production, and as it requires little capital investment and no high technology, it could be used anywhere in the world to make solar concentrating reflectors. A novel slope metrology method for full 1.65 aperture has been demonstrated, with 25 mm resolution across the face of the replicas. The method is null and therefore inherently accurate: it can easily be reproduced without high-tech equipment and does not need sophisticated calibration. We find by cross calibration with reference trough reflectors from RioGlass that our null-test laser system yields a measurement accuracy better than 0.4 mrad rms slope error. Our system is inexpensive and could have broad application for test and alignment of trough or dish reflectors. Ten full size (2.5 m2) cylindrically curved reflectors, molded in 950 seconds and measured with the laser test facility, show shape repeatability to 0.5 mrad rms. These replicas met the Phase I Go/No-Go targets for speed (1000 sec), accuracy (< 5 mrad) and reproducibility (< 2 mrad). Our research and tests show that the hoped-for improvements in mirror reflectivity achievable with titania antisoil coatings are not very effective in dry climates and are therefore unlikely to be economically worthwhile, and that glass with iron in the Fe+3 state to achieve very low absorption cannot be made economically by the float process.

  19. AMO's New Institute for Advanced Composites Manufacturing Innovation...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    for Advanced Composites Manufacturing Innovation Will Focus on Reducing Energy Use AMO's New Institute for ... on advanced composites-materials that are three times as ...

  20. Advanced Manufacturing Office (Formerly Industrial Technologies...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Manufacturing Office (Formerly Industrial Technologies Program) Advanced Manufacturing Office (Formerly Industrial Technologies Program) Presented at the NREL Hydrogen and Fuel...

  1. Advanced Battery Manufacturing Facilities and Equipment Program |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy 2 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Program Annual Merit Review and Peer Evaluation Meeting PDF icon arravt002_es_flicker_2012_p.pdf More Documents & Publications Advanced Battery Manufacturing Facilities and Equipment Program Advanced Battery Manufacturing Facilities and Equipment Program AVTA: 2010 Honda Civic HEV with Experimental Ultra Lead Acid Battery Testing Results

  2. Advanced Battery Manufacturing Facilities and Equipment Program |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy 0 DOE Vehicle Technologies and Hydrogen Programs Annual Merit Review and Peer Evaluation Meeting, June 7-11, 2010 -- Washington D.C. PDF icon esarravt002_flicker_2010_p.pdf More Documents & Publications Advanced Battery Manufacturing Facilities and Equipment Program Advanced Battery Manufacturing Facilities and Equipment Program AVTA: 2010 Honda Civic HEV with Experimental Ultra Lead Acid Battery Testing Results

  3. Clean Energy Manufacturing Initiative | Department of Energy

    Energy Savers [EERE]

    Clean Energy Manufacturing Initiative Energy Materials Network Energy Materials Network The Energy Materials Network (EMN) is an enduring national lab-led initiative that aims to dramatically decrease the time-to-market for advanced materials innovations critical to many clean energy technologies. Read more Leadership Perspectives: The Opportunity for Clean Energy Manufacturing Leadership Perspectives: The Opportunity for Clean Energy Manufacturing There is a tremendous opportunity for the

  4. Revolutionizing Clean Energy Technology with Advanced Composites

    SciTech Connect (OSTI)

    Hockfield, Susan; Holliday Jr, Charles O.; Markell, Brad

    2015-01-13

    Energy conservation and manufacturing leaders discuss manufacturing products with advance composites to revolutionize the future with clean energy technology.

  5. Advanced Qualification of Additive Manufacturing Materials Workshop

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Advanced Qualification of Additive Manufacturing Materials Workshop Advanced Qualification of Additive Manufacturing Materials Workshop WHEN: Jul 20, 2015 8:30 AM - Jul 21, 2015...

  6. Advanced Battery Manufacturing Facilities and Equipment Program...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    PDF icon arravt002esflicker2012p.pdf More Documents & Publications Advanced Battery Manufacturing Facilities and Equipment Program Advanced Battery Manufacturing...

  7. Advanced Battery Manufacturing Facilities and Equipment Program...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    PDF icon arravt002esflicker2011p.pdf More Documents & Publications Advanced Battery Manufacturing Facilities and Equipment Program Advanced Battery Manufacturing...

  8. New Institute for Advanced Composites Manufacturing Innovation Announced |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Institute for Advanced Composites Manufacturing Innovation Announced New Institute for Advanced Composites Manufacturing Innovation Announced January 12, 2015 - 2:00pm Addthis AMO's New Institute for Advanced Composites Manufacturing Innovation will Focus on Reducing Energy Use "Places like this are who we are. We create. We innovate. We build. We do it together." -President Obama, January 9, 2015 The Institute for Advanced Composites Manufacturing Innovation

  9. Energy 101: Clean Energy Manufacturing | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Clean Energy Manufacturing Energy 101: Clean Energy Manufacturing Addthis Description Most of us have a basic understanding of manufacturing. It's how we convert raw materials, components, and parts into finished goods that meet our essential needs and make our lives easier. But what about clean energy manufacturing? Clean energy and advanced manufacturing have the potential to rejuvenate the U.S. manufacturing industry and open pathways to increased American competitiveness. Text version Below

  10. Advanced Methods for Manufacturing Newsletter - Issue 1 | Department of

    Broader source: Energy.gov (indexed) [DOE]

    Energy The Advanced Methods for Manufacturing (AMM) newsletter includes information about selected projects pertaining to additive manufacturing, concrete technologies, and welding innovations currently funded by the Department of Energy's Office of Nuclear Energy. PDF icon NEET-Advanced Methods fo Manufacturing Newsletter - Issue 1.pdf More Documents & Publications FY 2015 Advanced Methods for Manufacturing Program Review Meeting 2015 NEET Crosscutting Award Summaries 2013 Annual DOE-NE

  11. Teaming Up to Apply Advanced Manufacturing Methods to Wind Turbine

    Energy Savers [EERE]

    Production | Department of Energy Teaming Up to Apply Advanced Manufacturing Methods to Wind Turbine Production Teaming Up to Apply Advanced Manufacturing Methods to Wind Turbine Production February 1, 2016 - 4:13pm Addthis A view of the Big Area Additive Manufacturing machine that will 3D print molds used to manufacture wind turbine blades. Photo courtesy of Oak Ridge National Laboratory. A view of the Big Area Additive Manufacturing machine that will 3D print molds used to manufacture wind

  12. Energy Use in Manufacturing

    Reports and Publications (EIA)

    2006-01-01

    This report addresses both manufacturing energy consumption and characteristics of the manufacturing economy related to energy consumption. In addition, special sections on fuel switching capacity and energy-management activities between 1998 and 2002 are also featured in this report.

  13. Joint Fuel Cell Technologies and Advanced Manufacturing Webinar |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Fuel Cell Technologies and Advanced Manufacturing Webinar Joint Fuel Cell Technologies and Advanced Manufacturing Webinar Download the presentation slides from the "Joint Fuel Cell Technologies Office and Advanced Manufacturing Office Webinar" held November 20, 2012. PDF icon Joint Fuel Cell Technologies Office and Advanced Manufacturing Office Webinar Slides More Documents & Publications Hydrogen and Fuel Cell Technologies FY 2014 Budget Request Rollout to

  14. Advanced Manufacturing Office: Smart Manufacturing Industry Day...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... Smart Manufacturing is a network data-driven process that combines innovative automation ... Smart Manufacturing is a network data-driven process that combines innovative automation ...

  15. Sec. Moniz Discusses Advanced Technology Vehicle Manufacturing Loans |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Discusses Advanced Technology Vehicle Manufacturing Loans Sec. Moniz Discusses Advanced Technology Vehicle Manufacturing Loans April 2, 2014 - 4:37pm Addthis NEWS MEDIA CONTACT (202) 586-4940 Washington D.C. - U.S. Secretary of Energy Ernest Moniz today highlighted key improvements to the Department's Advanced Technology Vehicles Manufacturing (ATVM) Loan Program at the Motor & Equipment Manufacturers Association (MEMA) Legislative Summit. The ATVM Loan Program plays

  16. Fuel Cell Manufacturing: American Energy and Manufacturing Competitive...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Fuel Cell Manufacturing: American Energy and Manufacturing Competitiveness Summit Fuel Cell Manufacturing: American Energy and Manufacturing Competitiveness Summit Presentation on...

  17. AMO's New Institute for Advanced Composites Manufacturing Innovation Will

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Focus on Reducing Energy Use | Department of Energy for Advanced Composites Manufacturing Innovation Will Focus on Reducing Energy Use AMO's New Institute for Advanced Composites Manufacturing Innovation Will Focus on Reducing Energy Use January 12, 2015 - 12:40pm Addthis Places like this are who we are. We create. We innovate. We build. We do it together. -President Obama, January 9, 2015 The Institute for Advanced Composites Manufacturing Innovation is a public-private consortium of 122

  18. Advanced Materials and Manufacturing | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Materials and Manufacturing Argonne researchers prepare silicon wafers for full-scale deposition testing of dielectric coatings for large area detectors. Argonne researchers prepare silicon wafers for full-scale deposition testing of dielectric coatings for large area detectors. Argonne's award-winning expertise in the creation and analysis of novel materials contributes to wide-ranging advances that improve industrial processes and manufactured products, saving energy and reducing waste. Many

  19. Notice of Intent (NOI): Clean Energy Manufacturing Innovation...

    Broader source: Energy.gov (indexed) [DOE]

    Energy Manufacturing Innovation Institute on Smart Manufacturing: Advanced Sensors, Controls, Platforms, and Modeling for Manufacturing" (DE-FOA-0001263). This is a Notice of...

  20. Clean Energy Manufacturing Innovation Institute for Composites...

    Broader source: Energy.gov (indexed) [DOE]

    Date: 06192014 Full applications are due. Funding Organization: The Advanced Manufacturing Office of the Office of Energy Efficiency and Renewable Energy Funding Number:...

  1. Manufacturing Energy and Carbon Footprint References

    Broader source: Energy.gov (indexed) [DOE]

    References AMO (Advanced Manufacturing Office), EERE (Energy Efficiency and Renewable Energy). 2012. Consider Installing High-Pressure Boilers with Backpressure Turbine-Generators. ...

  2. Sales and Use Tax Exclusion for Advanced Transportation and Alternative Energy Manufacturing Program

    Broader source: Energy.gov [DOE]

    To date, the Program has approved financial assistance for private entities in the following fields: electric vehicle manufacturing, solar photovoltaic manufacturing, landfill gas capture and...

  3. Manufacturing | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Science & Innovation » Energy Efficiency » Manufacturing Manufacturing Additive manufacturing, also know as 3D printing, has helped spark a creative manufacturing renaissance, allowing companies to create products in new ways while also reducing material waste, saving energy and shortening the time needed to bring products to market. Learn more about this game-changing technology. Manufacturing is the lifeblood of the American economy -- providing jobs for hard working American families

  4. Chapter 6: Innovating Clean Energy Technologies in Advanced Manufacturing | Direct Thermal Energy Conversion Materials, Devices, and Systems Technology Assessment

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    and Modeling for Manufacturing Combined Heat and Power Systems Composite Materials Critical Materials Direct Thermal Energy Conversion Materials, Devices, and Systems Materials for Harsh Service Conditions Process Heating Process Intensification Roll-to-Roll Processing Sustainable Manufacturing - Flow of Materials through Industry Waste Heat Recovery Systems Wide Bandgap Semiconductors for Power Electronics ENERGY U.S. DEPARTMENT OF Quadrennial Technology Review 2015 1 Quadrennial Technology

  5. Advanced Qualification of Additive Manufacturing Workshop

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Additive Manufacturing Workshop Poster Abstract Submission - deadline July 10, 2015 Advanced Qualification of Additive Manufacturing Materials using in situ sensors, diagnostics...

  6. Explore Careers in Manufacturing | Department of Energy

    Office of Environmental Management (EM)

    Manufacturing Explore Careers in Manufacturing The Advanced Manufacturing Office (AMO) invests in public-private research and development partnerships and encourages a culture of continuous improvement in corporate energy management to bring about a transformation in U.S. manufacturing. The Advanced Manufacturing Office (AMO) invests in public-private research and development partnerships and encourages a culture of continuous improvement in corporate energy management to bring about a

  7. In Texas, Energy Sec. Moniz to Echo President’s State of the Union Call to Foster Advanced Manufacturing and Innovation

    Broader source: Energy.gov [DOE]

    Secretary of Energy Ernest Moniz will travel to Austin and San Antonio, Texas to highlight the President’s State of the Union Address and the Administration’s efforts to foster innovation and advanced manufacturing

  8. Request for Information (RFI): Advanced Manufacturing Office (AMO) Software

    Energy Savers [EERE]

    Tools | Department of Energy Advanced Manufacturing Office (AMO) Software Tools Request for Information (RFI): Advanced Manufacturing Office (AMO) Software Tools July 25, 2014 - 1:00pm Addthis Funding: This RFI is not a Funding Opportunity Announcement (FOA); therefore, EERE is not accepting applications at this time. Open Date: 07/25/2014 Close Date: 09/30/2014 Funding Organization: The Advanced Manufacturing Office of the Office of Energy Efficiency and Renewable Energy Funding Number:

  9. Notice of Intent (NOI): Clean Energy Manufacturing Innovation Institute on

    Energy Savers [EERE]

    Smart Manufacturing: Advanced Sensors, Controls, Platforms and Modeling for Manufacturing | Department of Energy Notice of Intent (NOI): Clean Energy Manufacturing Innovation Institute on Smart Manufacturing: Advanced Sensors, Controls, Platforms and Modeling for Manufacturing Notice of Intent (NOI): Clean Energy Manufacturing Innovation Institute on Smart Manufacturing: Advanced Sensors, Controls, Platforms and Modeling for Manufacturing December 11, 2014 - 11:30am Addthis The purpose of

  10. Manufacturing | Department of Energy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    in the production of clean energy technologies like electric vehicles, LED bulbs and solar panels. The Department is also working with manufacturers to increase their energy...

  11. Designing the Future of Advanced Composites Manufacturing | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Designing the Future of Advanced Composites Manufacturing Designing the Future of Advanced Composites Manufacturing June 24, 2015 - 4:46pm Addthis Left: Gary Bertoline, Dean of Purdue Polytechnic Institute; Kelly Visconti, Technology Manager for the U.S. Department of Energy Advanced Manufacturing Office; John Dennis, Mayor of West Lafayette; Mitch Daniels, President of Purdue University; R. Byron Pipes, John Leighton Bray Distinguished Professor of Engineering; Victor Smith, Indiana

  12. Manufacturing Success Stories | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy Advanced Manufacturing Office; John Dennis, Mayor of West Lafayette; Mitch Daniels, President of Purdue University; R. Byron Pipes, John Leighton Bray Distinguished...

  13. Webtrends Archives by Fiscal Year - Advanced Manufacturing Office...

    Broader source: Energy.gov (indexed) [DOE]

    Advanced Manufacturing Office, Webtrends archives by fiscal year. Microsoft Office document icon Advanced Manufacturing FY09 Microsoft Office document icon Advanced Manufacturing ...

  14. Institute for Advanced Composites Manufacturing Innovation Holds Second

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Membership Meeting | Department of Energy Institute for Advanced Composites Manufacturing Innovation Holds Second Membership Meeting Institute for Advanced Composites Manufacturing Innovation Holds Second Membership Meeting January 27, 2016 - 9:56am Addthis On January 13-14, the Institute for Advanced Composites Manufacturing Innovation (IACMI) held its second membership meeting near Detroit, Michigan. IACMI, headquartered in Knoxville, TN is a public-private partnership creating clean

  15. EA-1834: Severstal Dearborn Advanced Technology Vehicle Manufacturing

    Office of Environmental Management (EM)

    Project in Dearborn, MI | Department of Energy ATVM » ATVM Environmental Compliance » EA-1834: Severstal Dearborn Advanced Technology Vehicle Manufacturing Project in Dearborn, MI EA-1834: Severstal Dearborn Advanced Technology Vehicle Manufacturing Project in Dearborn, MI February 1, 2011 EA-1834: Final Environmental Assessment Loan to Severstal Dearborn, Inc., for Advanced Technology Vehicles Manufacturing Project in Dearborn, Michigan February 18, 2011 EA-1834: Finding of No Significant

  16. Manufacturing Energy and Carbon Footprint References | Department of Energy

    Office of Environmental Management (EM)

    References Manufacturing Energy and Carbon Footprint References PDF icon footprint_references.pdf More Documents & Publications 2010 Manufacturing Energy and Carbon Footprints: References 2010 Manufacturing Energy and Carbon Footprints: Definitions and Assumptions Webtrends Archives by Fiscal Year - Advanced Manufacturing Office

  17. Manufacturing Energy and Carbon Footprint

    Office of Environmental Management (EM)

    All Manufacturing (NAICS 31-33) Process Energy Electricity and Steam Generation Losses Process Losses 1,416 Nonprocess Losses 19,237 4,368 Steam Distribution Losses 870 574 Nonprocess Energy 10,903 Electricity Generation Steam Generation 19,237 731 Prepared for the U.S. Department of Energy, Advanced Manufacturing Office by Energetics Incorporated 1,434 10,350 2,430 Generation and Transmission Losses Generation and Transmission Losses 284 4,889 11,785 8,599 5,465 14,064 7,319 1,015 4,055 64.5

  18. Welcome and Advanced Manufacturing Partnership (Text Version)

    Broader source: Energy.gov [DOE]

    This is a text version of the Welcome and Advanced Manufacturing Partnership video, originally presented on March 12, 2012 at the MDF Workshop held in Chicago, Illinois.

  19. Advanced Battery Manufacturing Facilities and Equipment Program...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    and Equipment Program Advanced Battery Manufacturing Facilities and Equipment Program AVTA: 2010 Honda Civic HEV with Experimental Ultra Lead Acid Battery Testing Results

  20. Clean Energy Manufacturing Initiative | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Clean Energy Manufacturing Initiative Leadership Perspectives: The Opportunity for Clean Energy Manufacturing Leadership Perspectives: The Opportunity for Clean Energy Manufacturing There is a tremendous opportunity for the United States to manufacture clean energy and energy efficiency products. Watch this video to learn more about industry and DOE leaders' vision for a clean energy manufacturing future. Read more Energy 101: Clean Energy Manufacturing Energy 101: Clean Energy Manufacturing

  1. Advanced Manufacture of Second-Surface, Silvered Glass Reflectors for

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    High-Performance, Low-Cost CSP Collector Systems | Department of Energy Manufacture of Second-Surface, Silvered Glass Reflectors for High-Performance, Low-Cost CSP Collector Systems Advanced Manufacture of Second-Surface, Silvered Glass Reflectors for High-Performance, Low-Cost CSP Collector Systems Advanced Manufacture of Second-Surface, Silvered Glass Reflectors for High-Performance, Low-Cost CSP Collector Systems PDF icon csp_review_meeting_042313_angel.pdf More Documents &

  2. Berkeley Lab Highlights HPC at Advanced Manufacturing Event

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Highlights HPC at Advanced Manufacturing Event Berkeley Lab Highlights HPC at Advanced Manufacturing Event September 14, 2015 Peter Nugent, Division Deputy for Scientific Engagement in Berkeley Lab's Computational Research Division, and David Skinner, who leads NERSC's Strategic Partnerships effort, are participating this week in the third annual 2015 American Energy & Manufacturing Competitiveness Summit, where they will be discussing the increasing role of high performance computing in

  3. Stay informed with current announcements from the Advanced Manufacturing

    Energy Savers [EERE]

    Office (AMO). | Department of Energy Stay informed with current announcements from the Advanced Manufacturing Office (AMO). Stay informed with current announcements from the Advanced Manufacturing Office (AMO). September 30, 2015 - 11:30am Addthis Lawrence Livermore National Laboratory Leads DOE's New HPC for Manufacturing Program Lawrence Livermore National Laboratory (LLNL) is collaborating with Lawrence Berkeley and Oak Ridge National Laboratories (LBNL and ORNL) to lead a new US

  4. Institute for Advanced Composites Manufacturing Innovation | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Facilities » Institute for Advanced Composites Manufacturing Innovation Institute for Advanced Composites Manufacturing Innovation Institute Partners Covering 34 states, a consortium of 122 companies, nonprofits, universities, and research laboratories is partnering with the federal government to create a manufacturing hub focused on U.S. leadership in next-generation materials. Click on a state to view the partners working in that area. Thumbnail on opening image of linked video.

  5. About the Clean Energy Manufacturing Initiative | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    About the Clean Energy Manufacturing Initiative About the Clean Energy Manufacturing Initiative The Clean Energy Manufacturing Initiative (CEMI) is a U.S. Department of Energy (DOE)-wide commitment to enhancing U.S. manufacturing competitiveness while advancing the nation's energy goals, boosting the economy, and contributing to energy security. What We Do CEMI strategically rallies experts from across DOE, national laboratories, universities, nonprofit organizations, and private industry around

  6. Manufacturing Consumption of Energy 1994

    U.S. Energy Information Administration (EIA) Indexed Site

    (MECS) > MECS 1994 Combined Consumption and Fuel Switching Manufacturing Energy Consumption Survey 1994 (Combined Consumption and Fuel Switching) Manufacturing Energy Consumption...

  7. Advanced Manufacturing Office Update, July 2015

    Broader source: Energy.gov [DOE]

    Institute for Advanced Composites Manufacturing Innovation Launched The Institute for Advanced Composites Manufacturing Innovation (IACMI) was officially launched last week with the signature of a Cooperative Agreement with the not-for-profit organization established by the University of Tennessee Research Foundation. IACMI, The Composites Institute hosted an initial meeting with Consortium Members in mid-June in Knoxville, Tennessee.

  8. Building a More Competitive American Manufacturing Industry with Advanced

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Composites | Department of Energy a More Competitive American Manufacturing Industry with Advanced Composites Building a More Competitive American Manufacturing Industry with Advanced Composites January 9, 2015 - 10:21am Addthis Pictured above is the Shelby Cobra, a vehicle 3-D printed at Oak Ridge National Laboratory. Using advanced composites and 3-D printing both cut the car's weight in half and improved performance and safety. | Photo by Carlos Jones. Pictured above is the Shelby Cobra,

  9. Energy Saving Melting and Revert Reduction Technology (Energy SMARRT): Manufacturing Advanced Engineered Components Using Lost Foam Casting Technology

    SciTech Connect (OSTI)

    Harry Littleton; John Griffin

    2011-07-31

    This project was a subtask of Energy Saving Melting and Revert Reduction Technology (“Energy SMARRT”) Program. Through this project, technologies, such as computer modeling, pattern quality control, casting quality control and marketing tools, were developed to advance the Lost Foam Casting process application and provide greater energy savings. These technologies have improved (1) production efficiency, (2) mechanical properties, and (3) marketability of lost foam castings. All three reduce energy consumption in the metals casting industry. This report summarizes the work done on all tasks in the period of January 1, 2004 through June 30, 2011. Current (2011) annual energy saving estimates based on commercial introduction in 2011 and a market penetration of 97% by 2020 is 5.02 trillion BTU’s/year and 6.46 trillion BTU’s/year with 100% market penetration by 2023. Along with these energy savings, reduction of scrap and improvement in casting yield will result in a reduction of the environmental emissions associated with the melting and pouring of the metal which will be saved as a result of this technology. The average annual estimate of CO2 reduction per year through 2020 is 0.03 Million Metric Tons of Carbon Equivalent (MM TCE).

  10. Clean Energy Manufacturing Initiative: Technology Research and Development

    Office of Environmental Management (EM)

    | Department of Energy Clean Energy Manufacturing Initiative: Technology Research and Development Clean Energy Manufacturing Initiative: Technology Research and Development Through the Clean Energy Manufacturing Initiative, U.S. Department of Energy offices and programs have increased funding for manufacturing research and development (R&D) across the board with the goal of growing the clean energy manufacturing industry in the United States. The Advanced Manufacturing Office's R&D

  11. 2010 Manufacturing Energy and Carbon Footprints: References | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy References 2010 Manufacturing Energy and Carbon Footprints: References This five-page document provides the references to the Manufacturing Energy and Carbon Footprints (MECS 2010) PDF icon References for the Manufacturing Energy and Carbon Footprints (MECS 2010) More Documents & Publications Manufacturing Energy and Carbon Footprint References 2010 Manufacturing Energy and Carbon Footprints: Definitions and Assumptions Webtrends Archives by Fiscal Year - Advanced Manufacturing

  12. Revitalizing American Manufacturing | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Revitalizing American Manufacturing Revitalizing American Manufacturing September 13, 2010 - 5:30pm Addthis A123 Systems' President David Vieau speaks with Energy Secretary Steven Chu and Michigan Governor Jennifer Granholm at the opening of their Livonia, MI plant. The plant will develop and manufacture advanced batteries systems for electric vehicles. | Department of Energy Photo | A123 Systems' President David Vieau speaks with Energy Secretary Steven Chu and Michigan Governor Jennifer

  13. Advanced Technology Vehicles Manufacturing Loan Program | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Technology Vehicles Manufacturing Loan Program Advanced Technology Vehicles Manufacturing Loan Program PDF icon ATVM-Program-Application-Overview.pdf More Documents & Publications ATVM Program Overview 2015 ATVM Guidance for Applicants 11.4.14 ATVM Interim Final Rule Correction

  14. Advanced manufacturing: Technology and international competitiveness

    SciTech Connect (OSTI)

    Tesar, A.

    1995-02-01

    Dramatic changes in the competitiveness of German and Japanese manufacturing have been most evident since 1988. All three countries are now facing similar challenges, and these challenges are clearly observed in human capital issues. Our comparison of human capital issues in German, Japanese, and US manufacturing leads us to the following key judgments: Manufacturing workforces are undergoing significant changes due to advanced manufacturing technologies. As companies are forced to develop and apply these technologies, the constituency of the manufacturing workforce (especially educational requirements, contingent labor, job content, and continuing knowledge development) is being dramatically and irreversibly altered. The new workforce requirements which result due to advanced manufacturing require a higher level of worker sophistication and responsibility.

  15. Clean Energy Materials EERE's Clean Energy Manufacturing Initiative Launches

    Energy Savers [EERE]

    Sparking a Revolution in Clean Energy Materials EERE's Clean Energy Manufacturing Initiative Launches Energy Materials Network Volume 2, No. 1, January/February 2016 What's Happening @ EERE 2 A Message from Dave............................................ 3 ENERGY MATERIALS NETWORK Accelerating Materials Innovation & Advanced Manufacturing .......................................................... 4 Sparking a Revolution in Clean Energy Materials

  16. Agenda Advanced Methods for Manufacturing Workshop

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Agenda Advanced Methods for Manufacturing Workshop September 29, 2015 Lockheed Martin 2021 Crystal Drive Arlington, Virginia 8:30 Safety, Security and Housekeeping Dr. Scott Anderson 8:45 - 10:45 2012 Projects, 30 minutes with questions Lockheed Martin - Direct manufacturing of Nuclear Power components EPRI - Innovative Manufacturing Process for Nuclear power Plant Components Purdue - Modular Connection Technologies for SC Walls INL - Monitoring and Control of Hybrid Laser-GMAW Process 10:45 -

  17. Advanced Qualification of Additive Manufacturing Workshop

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Additive Manufacturing Workshop Advanced Qualification of Additive Manufacturing Materials (AM) Workshop Our goal is to define opportunities and research gaps within additive manufacturing (AM) and to engage the broader scientific/engineering community to discuss future research directions. thumbnail of thumbnail of Contact Institute Director Dr. Alexander V. Balatsky Institute for Materials Science (505) 665-0077 Email Deputy Director Dr. Jennifer S. Martinez Institute for Materials Science

  18. Advanced Qualification of Additive Manufacturing Materials Workshop

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    July » Advanced Qualification of Additive Manufacturing Materials Workshop Advanced Qualification of Additive Manufacturing Materials Workshop WHEN: Jul 20, 2015 8:30 AM - Jul 21, 2015 7:30 PM WHERE: La Fonda on the Plaza Santa Fe, New Mexico SPEAKER: Multiple speakers CONTACT: Caryll Blount (505) 665-3950 CATEGORY: Science TYPE: Workshop INTERNAL: Calendar Login Event Description Invited speakers from universities and research centers, both US-based and Europe-based, will provide updates on

  19. Advanced Manufacturing Office Small Business Innovation Research...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Manufacturing Office Small Business Innovation Research Small Business Technology ... in thermal and degradation resistance, high-performance, and lower-cost for energy systems. ...

  20. Advanced Battery Manufacturing Making Strides in Oregon | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Advanced Battery Manufacturing Making Strides in Oregon Advanced Battery Manufacturing Making Strides in Oregon February 16, 2012 - 12:09pm Addthis EnerG2 Ribbon Cutting Ceremony for new battery materials plant in Albany, Oregon. Photo courtesy of the Vehicle Technologies Program EnerG2 Ribbon Cutting Ceremony for new battery materials plant in Albany, Oregon. Photo courtesy of the Vehicle Technologies Program What are the key facts? Through the Recovery Act, the Department has

  1. Clean Energy Manufacturing Initiative | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Manufacturing Initiative Clean Energy Manufacturing Initiative Clean Energy Manufacturing Initiative Industrial Efficiency and Energy Productivity Video Clean Energy Manufacturing Initiative Industrial Efficiency and Energy Productivity Video Industrial efficiency and low-cost energy resources are key components to increasing U.S. energy productivity and makes the U.S. manufacturing sector more competitive. Companies find a competitive advantage in implementing efficiency technologies and

  2. Berkeley Lab Highlights HPC at Advanced Manufacturing Event

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Highlights HPC at Advanced Manufacturing Event Berkeley Lab Highlights HPC at Advanced Manufacturing Event September 14, 2015 Peter Nugent, Division Deputy for Scientific...

  3. Manufacturing Consumption of Energy 1994

    U.S. Energy Information Administration (EIA) Indexed Site

    Detailed Tables 28 Energy Information AdministrationManufacturing Consumption of Energy 1994 1. In previous MECS, the term "primary energy" was used to denote the "first use" of...

  4. The Clean Energy Manufacturing Initiative

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    THE OPPORTUNITY OF CLEAN ENERGY MANUFACTURING By 2030, the global market for new energy ... and Counterintelligence, National Nuclear Security Administration, Fossil Energy, ...

  5. The Advanced Manufacturing Partnership and the Advanced Manufacturing National Program Office

    Broader source: Energy.gov [DOE]

    This presentation describes the Advanced Manufacturing Partnership from its beginning as a recommendation of the President's Council of Advisers on Science and Technology to its development and organization.

  6. Fuel Cell Manufacturing: American Energy and Manufacturing Competitiveness Summit

    Broader source: Energy.gov [DOE]

    Presentation on fuel cell manufacturing by Sunita Satyapal at the American Energy and Manufacturing Competitiveness Summit on December 12, 2013.

  7. Advanced Electric Drive Vehicles | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    PDF icon arravt039tischwendeman2012o.pdf More Documents & Publications Advanced Electric Drive Vehicles Advanced Electric Drive Vehicles Energy & Manufacturing Workforce...

  8. Advanced Electric Drive Vehicles | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    D.C. PDF icon tiarravt039schwendeman2010o.pdf More Documents & Publications Advanced Electric Drive Vehicles Advanced Electric Drive Vehicles Energy & Manufacturing Workforce...

  9. Private-Public Partnerships for U.S. Advanced Manufacturing

    Energy Savers [EERE]

    Fiber Reinforced Polymer Composite Manufacturing Workshop Crystal City January 13, 2014 Private-Public Partnerships for U.S. Advanced Manufacturing Dr. Frank W. Gayle Advanced Manufacturing National Program Office www.manufacturing.gov U.S. Trade Balance of Advanced Technology 11% of U.S. GDP 12 million U.S. jobs * ~ half of U.S. Exports U.S. Trade Balance Advanced Technology Manufacturing Products ($ Billions) AMNPO Advanced Manufacturing National Program Office A White House chartered

  10. USCAR LEP ESST Advanced Manufacturing

    SciTech Connect (OSTI)

    Lazarus, L.J.

    2000-09-25

    The objective of this task was to provide processing information data summaries on powder metallurgy (PM) alloys that meet the partner requirements for the production of low mass, highly accurate, near-net-shape powertrain components. This required modification to existing ISO machinability test procedures and development of a new drilling test procedure. These summaries could then be presented in a web page format. When combined with information generated from the USCAR CRADA this would allow chemical, metallurgical, and machining data on PM alloys to be available to all engineering and manufacturing personnel that have access to in-house networks. The web page format also allows for the additions of other wrought materials, making this a valuable tool to the technical staffs.

  11. Increasing U.S. Manufacturing Competitiveness The Clean Energy Manufacturing Initia-

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Increasing U.S. Manufacturing Competitiveness The Clean Energy Manufacturing Initia- tive (CEMI) is a U.S. Department of Energy (DOE)-wide commitment to innovation and breaking down market barriers in order to enhance U.S. manufacturing competitiveness while advancing the nation's energy goals. As a part of this initiative, DOE is committing resources across technol- ogy areas to catalyze clean energy manufacturing research and development (R&D), as well as to catalyze greater energy

  12. Manufacturing consumption of energy 1991

    SciTech Connect (OSTI)

    Not Available

    1994-12-01

    This report provides estimates on energy consumption in the manufacturing sector of the US economy. These estimates are based on data from the 1991 Manufacturing Energy Consumption Survey (MECS). This survey--administered by the Energy End Use and Integrated Statistics Division, Office of Energy Markets and End Use, Energy Information Administration (EIA)--is the most comprehensive source of national-level data on energy-related information for the manufacturing industries.

  13. Advanced Qualification of Additive Manufacturing Workshop

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Additive Manufacturing Workshop Poster Abstract Submission - deadline July 10, 2015 Advanced Qualification of Additive Manufacturing Materials using in situ sensors, diagnostics and modeling Contact Institute Director Dr. Alexander V. Balatsky Institute for Materials Science (505) 665-0077 Email Deputy Director Dr. Jennifer S. Martinez Institute for Materials Science (505) 665-0045 Email Deputy Director Dr. Nathan A. Mara Institute for Materials Science (505) 667 8665 Email Institute

  14. Clean Energy Manufacturing Initiative Events | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Initiative Events Clean Energy Manufacturing Initiative Events

  15. Manufacturing Consumption of Energy 1994

    U.S. Energy Information Administration (EIA) Indexed Site

    Natural Gas to Residual Fuel Oil, by Industry Group and Selected Industries, 1994 369 Energy Information AdministrationManufacturing Consumption of Energy 1994 SIC Residual...

  16. The Clean Energy Manufacturing Initiative

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    around strategic priorities to increase U.S. clean energy manufacturing competitiveness. ... energy technologies toward commercial production. www.cyclotronroad.org Small Business ...

  17. Energy Intensity Indicators: Manufacturing Energy Intensity

    Broader source: Energy.gov [DOE]

    The manufacturing sector comprises 18 industry sectors, generally defined at the three-digit level of the North American Industrial Classification System (NAICS). The manufacturing energy data...

  18. Wind Energy & Manufacturing | Open Energy Information

    Open Energy Info (EERE)

    Wind Energy & Manufacturing Jump to: navigation, search Blades manufactured at Gamesa's factory in Ebensburg, Pennsylvania, will be delivered to wind farms across the United...

  19. clean energy manufacturing | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Clean Energy Manufacturing Initiative The Clean Energy Manufacturing Initiative is a strategic integration and commitment of manufacturing efforts across the DOE Office of Energy...

  20. Webtrends Archives by Fiscal Year — Advanced Manufacturing Office

    Broader source: Energy.gov [DOE]

    From the EERE Web Statistics Archive: Advanced Manufacturing Office, Webtrends archives by fiscal year.

  1. Advanced Manufacturing Office FY14 Budget At-a-Glance | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy FY14 Budget At-a-Glance Advanced Manufacturing Office FY14 Budget At-a-Glance Advanced Manufacturing Office FY14 Budget At-a-Glance, a publication of the U.S. Department of Energy's Office of Energy Efficiency and Renewable Energy. PDF icon manufacturing_ataglance_2014.pdf More Documents & Publications Advanced Manufacturing Office FY 2016 Budget At-A-Glance Advanced Manufacturing Office FY 2015 Budget At-A-Glance Bioenergy Technologies FY14 Budget At-a

  2. Bio-Manufacturing: A Strategic clean energy manufacturing opportunity |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Bio-Manufacturing: A Strategic clean energy manufacturing opportunity Bio-Manufacturing: A Strategic clean energy manufacturing opportunity Breakout Session 1: New Developments and Hot Topics Session 1-A: Biomass and the U.S. Competitive Advantages for Manufacturing Clean Energy Products Libby Wayman, Director, EERE Clean Energy Manufacturing Initiative PDF icon b13_wayman_1-a.pdf More Documents & Publications Amped Up! Volume 1, No.2 NREL/DOE EERE QC/Metrology

  3. Join Us for the Clean Energy Manufacturing Initiative's Western Regional

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Summit | Department of Energy Join Us for the Clean Energy Manufacturing Initiative's Western Regional Summit Join Us for the Clean Energy Manufacturing Initiative's Western Regional Summit March 25, 2014 - 1:45pm Addthis Additive manufacturing is just one of several technologies that are being advanced by the Energy Department’s Clean Energy Manufacturing Initiative, which aims to strengthen U.S. competitiveness in the production of clean energy products | Photo by Oak Ridge National

  4. Revolutionizing Manufacturing | Department of Energy

    Energy Savers [EERE]

    Revolutionizing Manufacturing Revolutionizing Manufacturing Addthis Saving Energy and Resources 1 of 4 Saving Energy and Resources Thanks to additive manufacturing technology, Oak Ridge National Laboratory was able to fabricate a robotic hand with less energy use and material waste. The novel, lightweight, low-cost fluid powered hand was selected for a 2012 R&D 100 award. | Photo courtesy of Oak Ridge National Laboratory. Partnering with Industry 2 of 4 Partnering with Industry The Energy

  5. Wind Program Manufacturing Research Advances Processes and Reduces Costs |

    Broader source: Energy.gov (indexed) [DOE]

    Department of Energy Tower sections being installed for a 2-MW wind turbine. Knowing that reducing the overall cost of wind energy begins on the factory floor, the Department of Energy's (DOE's) Wind Program supports research and development efforts and funding opportunities that integrate new designs, materials, and advanced techniques into the manufacturing process, making wind a more affordable source of renewable energy for communities nationwide. Numerous facilities specializing in the

  6. Energy Department, Treasury Announce Availability of $150 Million in Tax Credits for Clean Energy Manufacturers

    Broader source: Energy.gov [DOE]

    The U.S. Departments of Energy and the Treasury announced the availability of $150 million in Advanced Energy Manufacturing Tax Credits for clean energy and energy efficiency manufacturing projects across the United States.

  7. Chapter 6 - Innovating Clean Energy Technologies in Advanced

    Office of Environmental Management (EM)

    Manufacturing | Department of Energy 6 - Innovating Clean Energy Technologies in Advanced Manufacturing Chapter 6 - Innovating Clean Energy Technologies in Advanced Manufacturing Chapter 6 - Innovating Clean Energy Technologies in Advanced Manufacturing Clean energy manufacturing involves the minimization of the energy and environmental impacts of the production, use, and disposal of manufactured goods, which range from fundamental commodities such as metals and chemicals to sophisticated

  8. Institute for Advanced Composites Manufacturing Innovation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Innovation - Sandia Energy Energy Search Icon Sandia Home Locations Contact Us Employee Locator Energy & Climate Secure & Sustainable Energy Future Stationary Power Energy Conversion Efficiency Solar Energy Wind Energy Water Power Supercritical CO2 Geothermal Natural Gas Safety, Security & Resilience of the Energy Infrastructure Energy Storage Nuclear Power & Engineering Grid Modernization Battery Testing Nuclear Fuel Cycle Defense Waste Management Programs Advanced Nuclear

  9. Manufacturing Consumption of Energy 1994

    U.S. Energy Information Administration (EIA) Indexed Site

    2(94) Distribution Category UC-950 Manufacturing Consumption of Energy 1994 December 1997 Energy Information Administration Office of Energy Markets and End Use U.S. Department of...

  10. Advanced Manufacturing Office FY 2015 Budget At-A-Glance

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of industry-specific and cross- cutting manufacturing technologies to ... come together to develop and leverage cutting-edge cross-cutting advanced manufacturing ...

  11. Manufacturing Consumption of Energy 1994

    U.S. Energy Information Administration (EIA) Indexed Site

    energy data used in this report do not reflect adjustments for losses in electricity generation or transmission. 1 The manufacturing sector is composed of establishments classified...

  12. Advanced Manufacturing Office Peer Review Final Agenda

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ADVANCED MANUFACTURING OFFICE PEER REVIEW MAY 28-29, 2015 Washington Marriott Wardman Park 2660 Woodley Road NW Washington, DC 20008 FINAL AGENDA Day 1 (May 28) 8:00 - 8:45 am Peer Reviewer Briefing Breakfast Mark Johnson, Isaac Chan, Mark Shuart, and Jay Wrobel, DOE-AMO 8:45 - 9:00 am BREAK 8:00 - 9:00 am REGISTRATION FOR ATTENDEES 9:00 - 9:30 am Welcome and AMO Overview Mark Johnson, DOE-AMO 9:30 - 9:50 am Sustainable Manufacturing via Multi-Scale Third Wave Systems Inc. Physics-Based Process

  13. Manufacturing consumption of energy 1994

    SciTech Connect (OSTI)

    1997-12-01

    This report provides estimates on energy consumption in the manufacturing sector of the U.S. economy based on data from the Manufacturing Energy Consumption Survey. The sample used in this report represented about 250,000 of the largest manufacturing establishments which account for approximately 98 percent of U.S. economic output from manufacturing, and an expected similar proportion of manufacturing energy use. The amount of energy use was collected for all operations of each establishment surveyed. Highlights of the report include profiles for the four major energy-consuming industries (petroleum refining, chemical, paper, and primary metal industries), and an analysis of the effects of changes in the natural gas and electricity markets on the manufacturing sector. Seven appendices are included to provide detailed background information. 10 figs., 51 tabs.

  14. MECS 2006 - All Manufacturing | Department of Energy

    Office of Environmental Management (EM)

    All Manufacturing MECS 2006 - All Manufacturing Manufacturing Energy and Carbon Footprint - Sector: All Manufacturing (NAICS 31-33) with Total Energy Input, October 2012 (MECS 2006) All available footprints and supporting documents Manufacturing Energy and Carbon Footprint PDF icon All Manufacturing (NAICS 31-33) More Documents & Publications All Manufacturing (2010 MECS) MECS 2006 - Alumina and Aluminum MECS 2006 - Cement

  15. Advanced Manufacturing and Engineering Equipment at the University of Southern Indiana

    SciTech Connect (OSTI)

    Mitchell, Zane Windsor; Gordon, Scott Allen

    2014-08-04

    Department of Energy grant DE-SC0005231was awarded to the University of Southern Indiana for the purchase of Advanced Manufacturing and Engineering equipment.

  16. Bandwidth Study on Energy Use and Potential Energy Saving Opportunities in U.S. Chemical Manufacturing

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Bandwidth Study on Energy Use and Potential Energy Saving Opportunities in U.S. Chemical Manufacturing i , ii Bandwidth Study on Energy Use and Potential Energy Saving Opportunities in U.S. Chemical Manufacturing THE U.S. DEPARTMENT OF ENERGY (DOE)'S ADVANCED MANUFACTURING OFFICE PROVIDED FUNDING FOR THIS ANALYSIS AND REPORT The DOE Office of Energy Efficiency and Renewable Energy (EERE)'s Advanced Manufacturing Office works with industry, small business, universities, and other stakeholders to

  17. Department of Energy Announces New Partnerships to Support Manufacturing

    Energy Savers [EERE]

    Job Training | Department of Energy Partnerships to Support Manufacturing Job Training Department of Energy Announces New Partnerships to Support Manufacturing Job Training June 29, 2011 - 12:00am Addthis Washington, D.C. - To complement the Obama Administration's launch last week of the Advanced Manufacturing Partnership, U.S. Secretary of Energy Steven Chu today announced a series of new manufacturing job training partnerships using the Department of Energy's National Training and

  18. Clean Energy Manufacturing Innovation Institute for Composite Materials And

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Structures Webinar | Department of Energy Clean Energy Manufacturing Innovation Institute for Composite Materials And Structures Webinar Clean Energy Manufacturing Innovation Institute for Composite Materials And Structures Webinar Slides and transcript of the webinar held on March 6th, 2014 from 3:00pm to 4:30pm EST on DE-FOA-0000977. Through this Funding Opportunity Announcement (FOA) The Advanced Manufacturing Office (AMO) of EERE seeks to establish a Clean Energy Manufacturing Innovation

  19. Draft Advanced Fossil Solicitation | Department of Energy

    Office of Environmental Management (EM)

    Draft Advanced Fossil Solicitation Draft Advanced Fossil Solicitation Federal loan guarantee solicitation announcement -- Advanced Fossil Energy Projects. PDF icon Microsoft Word - Draft Advanced Fossil Solicitation Final Draft.1 More Documents & Publications Federal Loan Guarantees for Projects that Manufacture Commercial Technology Renewable Energy Systems and Components: August 10, 2010 Advanced-Fossil-Energy-Projects-Loan-Guarantee-Solicitation_COMPLETE_22-Apr-2015 Nuclear Power

  20. CFL Manufacturers: ENERGY STAR Letters

    Broader source: Energy.gov [DOE]

    DOE issued letters to 25 manufacturers of compact fluorescent lamps (CFLs) involving various models after PEARL Cycle 9 testing indicated that the models do not meet the ENERGY STAR specification and, therefore, are disqualified from the ENERGY STAR Program.

  1. The President's Manufacturing Initiative | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    The President's Manufacturing Initiative The President's Manufacturing Initiative Presentation prepared by Dale Hall for the Roadmap Workshop on Manufacturing R&D for the Hydrogen Economy. PDF icon mfg_wkshp_hall.pdf More Documents & Publications The Advanced Manufacturing Partnership and the Advanced Manufacturing National Program Office Roadmap on Manufacturing R&D for the Hydrogen Economy Manufacturing R&D for the Hydrogen Economy Roadmap Workshop

  2. Advanced Battery Materials Synthesis and Manufacturing R&D Program...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Advanced Battery Materials Synthesis and Manufacturing R&D Program Argonne's Materials Engineering Research Facility (MERF) supports the laboratory's Advanced Battery Materials...

  3. FHP Manufacturing Company Geothermal | Open Energy Information

    Open Energy Info (EERE)

    FHP Manufacturing Company Geothermal Jump to: navigation, search Name: FHP Manufacturing Company: Geothermal Place: Florida Sector: Geothermal energy Product: FHP Manufacturing...

  4. Manufacturing of Protected Lithium Electrodes for Advanced Batteries

    Broader source: Energy.gov [DOE]

    Manufacturing of Protected Lithium Electrodes for Advanced Lithium-Air, Lithium-Water, and Lithium-Sulfur Batteries

  5. NREL: Energy Systems Integration - Manufacturing

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Manufacturing Manufacturing capabilities at NREL support the production of components for fuel cells and electrochemical cells and the development of methods and technologies that will assist manufacturers of hydrogen and fuel cell technologies, as well as other renewable energy technologies, to scale up their production to meet national goals. Fuel cells cleanly and efficiently convert hydrogen into electricity through an electrochemical process. Fuel cells offer promise in a wide range of

  6. New Institute for Advanced Composites Manufacturing Innovation...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    The Institute will focus on lowering the cost of advanced fiber-reinforced polymer composite materials by 50 percent, reducing the energy used to make composites by 75 percent, and ...

  7. Advanced Solar Power ASP | Open Energy Information

    Open Energy Info (EERE)

    Power (ASP) Place: Israel Sector: Solar Product: Involved in the development and manufacturing of innovative solar energy solutions. References: Advanced Solar Power (ASP)1...

  8. Clean Energy Manufacturing Reports | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Reports Clean Energy Manufacturing Reports The Clean Energy Manufacturing Initiative develops competitiveness analysis and strategies that inform R&D investments and other efforts needed to address key barriers to growing U.S. clean energy manufacturing competitiveness. This unprecedented competitiveness analysis evaluates the costs of producing clean energy products in the U.S. compared to competitor nations to understand factory location decisions and identify key drivers to U.S. clean

  9. Advanced Manufacturing Office FY 2015 Budget At-A-Glance | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy 5 Budget At-A-Glance Advanced Manufacturing Office FY 2015 Budget At-A-Glance The Advanced Manufacturing Office (AMO) partners with industry, small business, universities, and other stakeholders to identify and invest in emerging technologies with the potential to create high-quality U.S. manufacturing jobs, enhance global competitiveness, and reduce energy use by encouraging a culture of continuous improvement in corporate energy management. PDF icon fy15_at-a-glance_amo.pdf More

  10. Advanced Manufacturing Office FY 2016 Budget At-A-Glance | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy FY 2016 Budget At-A-Glance Advanced Manufacturing Office FY 2016 Budget At-A-Glance The Advanced Manufacturing Office (AMO) partners with industry, small business, universities, and other stakeholders to identify and invest in emerging technologies with the potential to create high-quality manufacturing jobs, enhance the global competitiveness of the United States, and reduce energy use by encouraging a culture of continuous enrichment in corporate energy management. PDF icon AMO FY

  11. ADVANCED MANUFACTURING OFFICE HIGH VALUE ROLL TO ROLL (HV R2R) WORKSHOP

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    DECEMBER 2-3, 2015 | Department of Energy ADVANCED MANUFACTURING OFFICE HIGH VALUE ROLL TO ROLL (HV R2R) WORKSHOP DECEMBER 2-3, 2015 ADVANCED MANUFACTURING OFFICE HIGH VALUE ROLL TO ROLL (HV R2R) WORKSHOP DECEMBER 2-3, 2015 PDF icon Draft Agenda More Documents & Publications WORKSHOP: SUSTAINABILITY IN MANUFACTURING AGENDA AND OVERVIEW WORKSHOP: HIGH VALUE ROLL TO ROLL (HV R2R) MANUFACTURING INNOVATION, DECEMBER 2-3, 2015 2015 AMO Peer Review Agenda

  12. Industrial Scale Demonstration of Smart Manufacturing Achieving Transformational Energy Productivity Gains

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Manufacturing ADVANCED MANUFACTURING OFFICE Industrial Scale Demonstration of Smart Manufacturing Achieving Transformational Energy Productivity Gains Development of an Open Architecture, Widely Applicable Smart Manufacturing Platform While many U.S. manufacturing operations utilize optimization for individual unit processes, smart manufacturing (SM) systems that integrate manufacturing intelligence in real time across an entire production operation are rare in large companies and virtually

  13. Alternative Energy Manufacturing Tax Credit

    Broader source: Energy.gov [DOE]

    The Alternative Energy Manufacturing Tax Credit is a nonrefundable tax credit for up to 100% of new state tax revenues (including state, corporate, sales, and withholding taxes) over the life of a...

  14. DOE Announces Webinars on Analysis in Clean Energy Manufacturing and

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Superior Energy Performance | Department of Energy Analysis in Clean Energy Manufacturing and Superior Energy Performance DOE Announces Webinars on Analysis in Clean Energy Manufacturing and Superior Energy Performance September 3, 2015 - 2:21pm Addthis EERE offers webinars to the public on a range of subjects, from adopting the latest energy efficiency and renewable energy technologies, to training for the clean energy workforce. Webinars are free; however, advanced registration is

  15. Innovative Manufacturing Initiative Recognition Day | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Innovative Manufacturing Initiative Recognition Day Innovative Manufacturing Initiative Recognition Day June 20, 2012 The Innovative Manufacturing Initiative (IMI) Recognition Day (held in Washington, DC on June 20, 2012) showcased IMI projects selected by the Energy Department to help American manufacturers dramatically increase the energy efficiency of their operations and reduce costs. Each project will advance transformational technologies and materials that can benefit a broad cross-section

  16. Understanding Manufacturing Energy and Carbon Footprints, October...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    More Documents & Publications Understanding the 2010 Manufacturing Energy and Carbon Footprints U.S. Manufacturing Energy Use and Greenhouse Gas Emissions Analysis MECS 2006 - ...

  17. Clean Energy Manufacturing Initiative Southeast Regional Summit...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Clean Energy Manufacturing Initiative Southeast Regional Summit Clean Energy Manufacturing Initiative Southeast Regional Summit July 9, 2015 8:30AM to 6:00PM EDT Renaissance...

  18. Manufacturing Consumption of Energy 1991--Combined Consumption...

    U.S. Energy Information Administration (EIA) Indexed Site

    call 202-586-8800 for help. Return to Energy Information Administration Home Page. Home > Energy Users > Manufacturing > Consumption and Fuel Switching Manufacturing Consumption of...

  19. Energy Department Invests in Innovative Manufacturing Technologies...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    in Innovative Manufacturing Technologies Energy Department Invests in Innovative Manufacturing Technologies June 13, 2012 - 12:00am Addthis The Energy Department announced on June...

  20. PRESENTATION: BRIEFING ON CLEAN ENERGY MANUFACTURING | Department of Energy

    Energy Savers [EERE]

    PRESENTATION: BRIEFING ON CLEAN ENERGY MANUFACTURING PRESENTATION: BRIEFING ON CLEAN ENERGY MANUFACTURING A briefing to the Secretary's Energy Advisory Board on the clean energy manufacturing delivered by David Danielson, Assistant Secretary for Energy Efficiency and Renewable Energy. PDF icon Briefing on Clean Energy Manufacturing More Documents & Publications National Network for Manufacturing Innovation: A Preliminary Design National Network for Manufacturing Innovation: A Preliminary

  1. Use a Vent Condenser to Recover Flash Steam Energy, Energy Tips: STEAM, Steam Tip Sheet #13 (Fact Sheet), Advanced Manufacturing Office (AMO), Energy Efficiency & Renewable Energy (EERE)

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    3 Use a Vent Condenser to Recover Flash Steam Energy When the pressure of saturated condensate is reduced, a portion of the liquid "fashes" to low-pressure steam. Depending on the pressures involved, the fash steam contains approximately 10% to 40% of the energy content of the original condensate. In most cases, including condensate receivers and deaerators, the fashing steam is vented and its energy content lost. However, a heat exchanger can be placed in the vent to recover this

  2. DOE Announces Effort to Advance U.S. Wind Power Manufacturing Capacity |

    Energy Savers [EERE]

    Department of Energy Effort to Advance U.S. Wind Power Manufacturing Capacity DOE Announces Effort to Advance U.S. Wind Power Manufacturing Capacity June 2, 2008 - 12:51pm Addthis MOU Launches Government-Industry Effort to Define and Develop Technologies and Siting Strategies Necessary to Achieve 20% Wind Energy by 2030 HOUSTON, TEXAS -The U.S. Department of Energy (DOE) Assistant Secretary of Energy Efficiency and Renewable Energy Andy Karsner today announced a Memorandum of Understanding

  3. Sandia Energy - Wind Energy Manufacturing Lab Helps Engineers...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Wind Energy Manufacturing Lab Helps Engineers Improve Wind Power Home Renewable Energy Energy Partnership News Wind Energy Wind Energy Manufacturing Lab Helps Engineers Improve...

  4. Advanced Manufacturing Office: Case Study - The Challenge: Saving Energy at a Sewage Lift Station Through Pump System Modificat

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Sewage System Process: Sewage Pumping System: Pump System Technology: Booster Pump, Energy-Efficient Motor Project Profile SIC: 4952 Products: Sewage Pumping Location: Milford, Connecticut Employees: 26 Showcase Team Leader: Art Berube Company Energy Philosophy: Changes in energy conservation must take place without any detrimental effects on system reliability. Conservation and reliability go hand in hand in the wastewater field. City of Milford, Connecticut U.S. Department of Energy - Energy

  5. Advanced Manufacturing Office FY 2017 Budget At-A-Glance | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    The Advanced Manufacturing Office (AMO) brings together manufacturers, research institutions, suppliers, and universities to investigate manufacturing processes, information, and ...

  6. Supporting Texas Manufacturing to Save Energy Now Program | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy State and Utility Engagement Activities » Supporting Texas Manufacturing to Save Energy Now Program Supporting Texas Manufacturing to Save Energy Now Program Texas The industrial sector in Texas is very energy intensive, with approximately 53% of all energy consumed in the state occurring in industrial plants. Therefore, Texas industrials have a great opportunity to reduce their energy intensity and related carbon emissions. In 2009, the U.S. Department of Energy's (DOE's) Advanced

  7. Upgrade Boilers with Energy-Efficient Burners, Energy Tips: STEAM, Steam Tip Sheet #24 (Fact Sheet), Advanced Manufacturing Office (AMO), Energy Efficiency & Renewable Energy (EERE)

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    4 Upgrade Boilers with Energy-Efficient Burners Background The purpose of the burner is to mix molecules of fuel with molecules of air. A boiler will run only as well as the burner performs. A poorly designed boiler with an effcient burner may perform better than a well-designed boiler with a poor burner. Burners are designed to maximize combustion effciency while minimizing the release of emissions. A power burner mechanically mixes fuel and combustion air and injects the mixture into the

  8. AMO Issues Request for Information on Clean Energy Manufacturing Topics,

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Including Fuel Cell and Hydrogen Applications | Department of Energy AMO Issues Request for Information on Clean Energy Manufacturing Topics, Including Fuel Cell and Hydrogen Applications AMO Issues Request for Information on Clean Energy Manufacturing Topics, Including Fuel Cell and Hydrogen Applications September 19, 2014 - 12:29pm Addthis The Advanced Manufacturing Office (AMO) seeks information on mid-Technology Readiness Level (TRL) research and development (R&D) needs, market

  9. Energy Efficient Thermoplastic Composite Manufacturing

    Broader source: Energy.gov (indexed) [DOE]

    Boeing Research & Technology (Marc Matsen) U.S. DOE Advanced Manufacturing Office Program Review Meeting Washington, D.C. May 28-29, 2015 This presentation does not contain any proprietary, confidential, or otherwise restricted information. Project Objective  The objective of the project is to establish an effective and affordable method to lay- up and consolidate/join large thermoplastic composite aerospace structure with cycle times measured in minutes rather than hours.  Composite

  10. DOE Manufacturing Pre-Solicitation Workshop | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Manufacturing Pre-Solicitation Workshop DOE Manufacturing Pre-Solicitation Workshop The U.S. Department of Energy (DOE) held a Manufacturing Pre-Solicitation Workshop in Arlington, Va., on May 18, 2007. Workshop participants reviewed the application process and discussed proposed topics for a research and development funding opportunity to advance manufacturing technologies for hydrogen and fuel cell systems. The workshop was held in conjunction with the DOE Hydrogen Program's 2007 Annual Merit

  11. National Alliance for Advanced Transportation Battery Cell Manufacture...

    Open Energy Info (EERE)

    Manufacture Product: US-based consortium formed to research, develop, and mass produce lithium ion batteries. References: National Alliance for Advanced Transportation Battery Cell...

  12. Advanced Manufacturing Office FY14 Budget At-a-Glance

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... are all critical parts of the President's effort to accelerate advanced manufacturing and engage colleges and universities and small and medium-sized business enterprises (SMEs). ...

  13. Advanced Sensors, Controls and Platforms for manufacturing (ASCPM...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... and government For more information about AMP, visit http:www.manufacturing.govamp.html 5 What is ASCPM? Advanced networked systems that combine sensors, data, models, and ...

  14. Advanced Manufacture of Second-Surface, Silvered Glass Reflectors...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Advanced Manufacture of Second-Surface, Silvered Glass Reflectors for High-Performance, Low-Cost CSP Collector Systems PDF icon cspreviewmeeting042313angel.pdf More Documents & ...

  15. Institute for Advanced Composites Helping America Lead on Clean Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Manufacturing | Department of Energy Institute for Advanced Composites Helping America Lead on Clean Energy Manufacturing Institute for Advanced Composites Helping America Lead on Clean Energy Manufacturing June 18, 2015 - 4:28pm Addthis Assistant Secretary for Energy Efficiency and Renewable Energy Dr. David Danielson speaks during the launch of the Institute for Advanced Composites Manufacturing Innovation in Knoxville, Tennessee. | Photo courtesy of Oak Ridge National Laboratory.

  16. All Manufacturing (2010 MECS) | Department of Energy

    Energy Savers [EERE]

    All Manufacturing (2010 MECS) All Manufacturing (2010 MECS) Manufacturing Energy and Carbon Footprint for All Manufacturing Sector (NAICS 31-33) Energy use data source: 2010 EIA MECS (with adjustments) Footprint Last Revised: June 2015 View footprints for other sectors here. Manufacturing Energy and Carbon Footprint PDF icon All Manufacturing More Documents & Publications Cement (2010 MECS) Chemicals (2010 MECS) Computers, Electronics and Electrical Equipment

  17. Manufacturing Energy and Carbon Footprints (2006 MECS)

    Broader source: Energy.gov [DOE]

    Energy and Carbon Footprints provide a mapping of energy from supply to end use in manufacturing. They show us where energy is used and lost—and where greenhouse gases (GHGs) are emitted. Footprints are available below for 15 manufacturing sectors (representing 94% of all manufacturing energy use) and for U.S. manufacturing as a whole. Analysis of these footprints is also available in the U.S. Manufacturing Energy Use and Greenhouse Gas Emissions Analysis report.

  18. Manufacturing Success Stories | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Efficiency » Manufacturing Success Stories Manufacturing Success Stories RSS The Office of Energy Efficiency and Renewable Energy's (EERE) successes in developing technologies and processes for more efficient energy management systems create big opportunities for energy savings and new jobs in manufacturing. Explore EERE's manufacturing success stories below. November 17, 2015 Manufacturing Success Stories ORNL Unveils 3D-Printed Home and Vehicle with the Unique Ability to Power One

  19. Clean Energy Manufacturing Analysis Center Webinar

    Broader source: Energy.gov [DOE]

    The U.S. Department of Energy offers a webinar to address clean energy manufacturing on April 5. Register today!

  20. Stronger Manufacturers' Energy Efficiency Standards for Residential...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Efficiency Standards for Residential Air Conditioners Go Into Effect Today Stronger Manufacturers' Energy Efficiency Standards for Residential Air Conditioners...

  1. Bio Solutions Manufacturing Inc | Open Energy Information

    Open Energy Info (EERE)

    Solutions Manufacturing Inc Jump to: navigation, search Name: Bio Solutions Manufacturing Inc Place: Las Vegas, Nevada Zip: 89103 Product: Waste-to-energy bioremediation developer....

  2. Leitner Shriram Manufacturing Ltd | Open Energy Information

    Open Energy Info (EERE)

    Manufacturing Ltd Jump to: navigation, search Name: Leitner Shriram Manufacturing Ltd Place: Chennai, Tamil Nadu, India Zip: 600095 Sector: Wind energy Product: Chennai-based JV...

  3. Manufacturing Energy Consumption Survey (MECS) - Analysis & Projection...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Manufacturing Activity between 2002 and 2010 Released: March 19, 2013 Total energy consumption in the manufacturing sector decreased by 17% from 2002 to 2010, according to data...

  4. References and Appendices: U.S. Manufacturing Energy Use and Greenhouse Gas Emissions Analysis, November 2012

    Energy Savers [EERE]

    4 U.S. Manufacturing Energy Use and Greenhouse Gas Emissions Analysis REFERENCES AMO (Advanced Manufacturing Office), EERE (Energy Efficiency and Renewable Energy). 2012a. Consider Installing High-Pressure Boilers with Backpressure Turbine-Generators. U.S. Department of Energy. http://www1.eere.energy.gov/manufacturing/tech_deployment/pdfs/steam22_backpressure.pdf AMO (Advanced Manufacturing Office), EERE (Energy Efficiency and Renewable Energy). 2012b. Improving Steam System Performance: A

  5. Advanced Li-Ion Polymer Battery Cell Manufacturing Plant in USA |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Li-Ion Polymer Battery Cell Manufacturing Plant in USA Advanced Li-Ion Polymer Battery Cell Manufacturing Plant in USA 2012 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Program Annual Merit Review and Peer Evaluation Meeting PDF icon arravt001_es_koo_2012_p.pdf More Documents & Publications Advanced Li-Ion Polymer Battery Cell Manufacturing Plant in USA Li-Ion Battery Cell Manufacturing 2010 DOE, Li-Ion Battery Cell Manufacturing

  6. Clean Energy Manufacturing Incentive Grant Program

    Broader source: Energy.gov [DOE]

    "Clean energy manufacturer" is defined as a biofuel producer, a manufacturer of renewable energy or nuclear equipment/products, or "products used for energy conservation, storage, or grid efficie...

  7. Mingchuang Energy Manufacturing Co Ltd | Open Energy Information

    Open Energy Info (EERE)

    Mingchuang Energy Manufacturing Co Ltd Jump to: navigation, search Name: Mingchuang Energy Manufacturing Co Ltd Place: China Sector: Wind energy Product: Chinese wind turbine...

  8. Evaluation of advanced polymers for additive manufacturing (Technical

    Office of Scientific and Technical Information (OSTI)

    Report) | SciTech Connect Technical Report: Evaluation of advanced polymers for additive manufacturing Citation Details In-Document Search Title: Evaluation of advanced polymers for additive manufacturing The goal of this Manufacturing Demonstration Facility (MDF) technical collaboration project between Oak Ridge National Laboratory (ORNL) and PPG Industries, Inc. was to evaluate the feasibility of using conventional coatings chemistry and technology to build up material layer-by-layer. The

  9. Next Generation Manufacturing Processes | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Research & Development Projects » Next Generation Manufacturing Processes Next Generation Manufacturing Processes New process technologies can rejuvenate U.S. manufacturing. Novel processing concepts can open pathways to double net energy productivity, enabling rapid manufacture of energy-efficient, high-quality products at competitive cost. Four process technology areas are expected to generate large energy, carbon, and economic benefits across the manufacturing sector. Click the areas

  10. 2014 Manufacturing Energy Consumption Survey

    Gasoline and Diesel Fuel Update (EIA)

    U S C E N S U S B U R E A U 2014 Manufacturing Energy Consumption Survey Sponsored by the Energy Information Administration U.S. Department of Energy Administered and Compiled by the Bureau of the Census U.S. Department of Commerce Form EIA-846 (mm-dd-yy) OMB Approval No. xxxx-xxxx Expires: mm/dd/yyyy Report Electronically: www.census.gov/ econhelp/mecs Username: Password: Reporting electronically allows you to save your work as you go through the form and could save you time If you need

  11. Advanced Manufacturing Office At-A-Glance

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... Computing for Manufacturing R&D assists U.S. industry with their most ... Innovation that includes more than 100 industry, SME, and academic partners and members. ...

  12. Advanced Manufacturing Office (Formerly Industrial Technologies Program)

    Broader source: Energy.gov [DOE]

    Presented at the NREL Hydrogen and Fuel Cell Manufacturing R&D Workshop in Washington, DC, August 11-12, 2011.

  13. American Energy and Manufacturing Competitiveness Summit Introduction |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy American Energy and Manufacturing Competitiveness Summit Introduction American Energy and Manufacturing Competitiveness Summit Introduction Addthis Description Introduction video for the American Energy and Manufacturing Competitiveness Summit. Text Version Below is the text version for the American Energy and Manufacturing Competetitiveness Summit Introduction video. The video opens with an aerial city view as the sun rises, then cuts to time lapse photos of a highway

  14. Clean Energy Manufacturing Initiative Midwest Regional Summit:

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Lightweighting Breakout Session Summary | Department of Energy Clean Energy Manufacturing Initiative Midwest Regional Summit: Lightweighting Breakout Session Summary Clean Energy Manufacturing Initiative Midwest Regional Summit: Lightweighting Breakout Session Summary Clean Energy Manufacturing Initiative Midwest Regional Summit: Lightweighting Breakout Session Summary June 21, 2013 PDF icon Lightweighting Breakout Session Summary More Documents & Publications Fiber Reinforced Polymer

  15. Clean Energy Manufacturing Initiative Industrial Efficiency and...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Industrial Efficiency and Energy Productivity Video Clean Energy Manufacturing Initiative Industrial Efficiency and Energy Productivity Video Addthis An error occurred. Try...

  16. Energy-Related Carbon Emissions in Manufacturing

    Reports and Publications (EIA)

    2000-01-01

    Energy-related carbon emissions in manufacturing analysis and issues related to the energy use, energy efficiency, and carbon emission indicators.

  17. Partnering for Clean Energy Manufacturing Competitiveness

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Libby Wayman Director, Clean Energy Manufacturing Initiative Partnering for Clean Energy ... Increase U.S. competitiveness in the production of clean energy products 2. Increase ...

  18. Sandia Energy - Advanced Research & Development

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Advanced Research & Development Home Stationary Power Energy Conversion Efficiency Solar Energy Photovoltaics Advanced Research & Development Advanced Research & DevelopmentCoryne...

  19. Manufacturing Perspective | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Perspective Manufacturing Perspective Presented at the R&D Strategies for Compressed, Cryo-Compressed and Cryo-Sorbent Hydrogen Storage Technologies Workshops on February 14 and 15, 2011. PDF icon compressed_hydrogen2011_5_nelson.pdf More Documents & Publications BCA Perspective on Fuel Cell APUs Energy Storage Systems 2006 Peer Review - Day 1 morning presentations 2015 SSL R&D WORKSHOP PRESENTATIONS - DAY 3

  20. Fact Sheet: Advanced Natural Gas Systems Manufacturing R&D Initiative |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Advanced Natural Gas Systems Manufacturing R&D Initiative Fact Sheet: Advanced Natural Gas Systems Manufacturing R&D Initiative The following fact sheet outlines one of the Department of Energy's series of actions, partnerships, and stakeholder commitments to help modernize the nation¹s natural gas transmission and distribution systems and reduce methane emissions. DOE will launch a collaborative effort with industry to evaluate and scope high-impact

  1. Energy Department Announces $4.4 Million to Advance Hydropower

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Manufacturing | Department of Energy 4.4 Million to Advance Hydropower Manufacturing Energy Department Announces $4.4 Million to Advance Hydropower Manufacturing December 1, 2014 - 4:09pm Addthis The Energy Department today announced a total of $4.4 million for two projects in Michigan and Pennsylvania to support the use of advanced materials and manufacturing techniques in the development of new "low-head" hydropower technologies. The United States has major opportunities across

  2. Insulate Steam Distribution and Condensate Return Lines, Energy Tips: STEAM, Steam Tip Sheet #2 (Fact Sheet), Advanced Manufacturing Office (AMO), Energy Efficiency & Renewable Energy (EERE)

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    2 Insulate Steam Distribution and Condensate Return Lines Uninsulated steam distribution and condensate return lines are a constant source of wasted energy. The table shows typical heat loss from uninsulated steam distribution lines. Insulation can typically reduce energy losses by 90% and help ensure proper steam pressure at plant equipment. Any surface over 120°F should be insulated, including boiler surfaces, steam and condensate return piping, and fttings. Insulation frequently becomes

  3. Clean Energy Manufacturing Funding Opportunities | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Funding Opportunities Clean Energy Manufacturing Funding Opportunities To accomplish the goals of the Clean Energy Manufacturing Initiative (CEMI), the U.S. Department of Energy (DOE) supports increased funding for manufacturing research and development across the board, specifically with the goal of growing the clean energy manufacturing industry in the United States. Examples include: Photo of carbon fiber rolls being manufactured. Solar Manufacturing Technology Solar Manufacturing Technology

  4. Energy Information Administration (EIA)- Manufacturing Energy Consumption

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Survey (MECS) Steel Analysis Brief Steel Industry Analysis Brief Change Topic: Steel | Chemical JUMP TO: Introduction | Energy Consumption | Energy Expenditures | Producer Prices and Production | Energy Intensity | Energy Management Activities Introduction The steel industry is critical to the U.S. economy. Steel is the material of choice for many elements of construction, transportation, manufacturing, and a variety of consumer products. It is the backbone of bridges, skyscrapers,

  5. Sandia Energy - Advanced Imaging

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Advanced Imaging Home Transportation Energy Predictive Simulation of Engines Reacting Flow Experiments Advanced Imaging Advanced ImagingAshley Otero2015-10-30T01:47:37+00:00...

  6. Manufacturing Energy and Carbon Footprints Scope

    Office of Environmental Management (EM)

    Manufacturing Energy and Carbon Footprint Scope The footprint analysis looks at a large subset of U.S. manufacturing, with the objective of capturing the bulk share of energy consumption and carbon emissions. Table 1 lists the fifteen manufacturing sectors selected for analysis; a sixteenth footprint has also been prepared for the entire manufacturing sector. Manufacturing sectors are listed by their respective NAICS (North American Industry Classification System) codes. NAICS descriptions of

  7. Wind Manufacturing and Supply Chain | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    You are here Home » Research & Development » Wind Manufacturing and Supply Chain Wind Manufacturing and Supply Chain The U.S. Department of Energy (DOE) works with wind technology suppliers to promote advanced manufacturing capabilities. Its goals are to increase reliability while lowering production costs, and to promote an industry that can meet all demands domestically while competing in the global market. The Wind Program supports industry partnerships and targeted R&D investments

  8. Advanced Manufacturing Office Update, July 2014 | Department...

    Office of Environmental Management (EM)

    ... The winner, Michele Ano of Italy, will receive a 5,000 cash prize and see his concept built from scratch at the International Manufacturing Technology Show in September 2014. ...

  9. Minimize Boiler Short Cycling Losses, Energy Tips: STEAM, Steam Tip Sheet #16 (Fact Sheet), Advanced Manufacturing Office (AMO), Energy Efficiency & Renewable Energy (EERE)

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    6 Minimize Boiler Short Cycling Losses Boiler "short cycling" occurs when an oversized boiler quickly satisfes process or space heating demands, and then shuts down until heat is again required. Process heating demands can change over time. Boilers may have been oversized for additions or expansions that never occurred. Installing energy conservation or heat recovery measures may also reduce the heat demand. As a result, a facility may have multiple boilers, each rated at several times

  10. Replace Pressure-Reducing Valves with Backpressure Turbogenerators, Energy Tips: STEAM, Steam Tip Sheet #20 (Fact Sheet), Advanced Manufacturing Office (AMO), Energy Efficiency & Renewable Energy (EERE)

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    0 Replace Pressure-Reducing Valves with Backpressure Turbogenerators Many industrial facilities produce steam at a pressure higher than that demanded by process requirements. Steam passes through pressure-reducing valves (PRVs, also known as letdown valves) at various locations in the steam distribution system to let down or reduce its pressure. A noncondensing or backpressure steam turbine can perform the same pressure-reducing function as a PRV while converting steam energy into electrical

  11. Clean Firetube Boiler Waterside Heat Transfer Surfaces, Energy Tips: STEAM, Steam Tip Sheet #7 (Fact Sheet), Advanced Manufacturing Office (AMO), Energy Efficiency & Renewable Energy (EERE)

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    7 Clean Firetube Boiler Waterside Heat Transfer Surfaces The prevention of scale formation in fretube boilers can result in substantial energy savings. Scale deposits occur when calcium, magnesium, and silica, commonly found in most water supplies, react to form a continuous layer of material on the waterside of the boiler heat exchange tubes. Scale creates a problem because it typically possesses a thermal conductivity, an order of magnitude less than the corresponding value for bare steel.

  12. Consider Installing a Condensing Economizer, Energy Tips: STEAM, Steam Tip Sheet #26A (Fact Sheet), Advanced Manufacturing Office (AMO), Energy Efficiency & Renewable Energy (EERE)

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    A Suggested Actions ■ ■ Determine your boiler capacity, average steam production, combustion efficiency, stack gas temperature, annual hours of operation, and annual fuel consumption. ■ ■ Identify in-plant uses for heated water, such as boiler makeup water heating, preheating, or domestic hot water or process water heating requirements. ■ ■ Determine the thermal requirements that can be met through installation of a condensing economizer. Determine annual fuel energy and cost

  13. Recover Heat from Boiler Blowdown, Energy Tips: STEAM, Steam Tip Sheet #10 (Fact Sheet), Advanced Manufacturing Office (AMO), Energy Efficiency & Renewable Energy (EERE)

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    0 Recover Heat from Boiler Blowdown Heat can be recovered from boiler blowdown by using a heat exchanger to preheat boiler makeup water. Any boiler with continuous blowdown exceeding 5% of the steam rate is a good candidate for the introduction of blowdown waste heat recovery. Larger energy savings occur with high-pressure boilers. The following table shows the potential for heat recovery from boiler blowdown. Example In a plant where the fuel cost is $8.00 per million Btu ($8.00/MMBtu), a con-

  14. Cover Heated, Open Vessels, Energy Tips: STEAM, Steam Tip Sheet #19 (Fact Sheet), Advanced Manufacturing Office (AMO), Energy Efficiency & Renewable Energy (EERE)

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    9 Cover Heated, Open Vessels Open vessels that contain heated liquids often have high heat loss due to surface evaporation. Both energy and liquid losses are reduced by covering open vessels with insulated lids. The table below provides an estimate of the evaporative heat loss per square foot (ft 2 ) of uncovered vessel surface area for various water and dry ambient air temperatures. It is assumed that the ambient air is dry with no wind currents. A fan pulling air over the uncovered tank could

  15. Use Feedwater Economizers for Waste Heat Recovery, Energy Tips: STEAM, Steam Tip Sheet #3 (Fact Sheet), Advanced Manufacturing Office (AMO), Energy Efficiency & Renewable Energy (EERE)

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    PROGRAM Energy Tips: STEAM Steam Tip Sheet #3 Use Feedwater Economizers for Waste Heat Recovery A feedwater economizer reduces steam boiler fuel requirements by transferring heat from the fue gas to incoming feedwater. Boiler fue gases are often rejected to the stack at temperatures more than 100°F to 150°F higher than the temperature of the generated steam. Generally, boiler effciency can be increased by 1% for every 40°F reduction in fue gas temperature. By recovering waste heat, an

  16. Bandwidth Study on Energy Use and Potential Energy Saving Opportunities in U.S. Iron and Steel Manufacturing

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Iron and Steel Manufacturing i , ii Bandwidth Study on Energy Use and Potential Energy Saving Opportunities in U.S. Iron and Steel Manufacturing THE U.S. DEPARTMENT OF ENERGY (DOE)'S ADVANCED MANUFACTURING OFFICE PROVIDED FUNDING FOR THIS ANALYSIS AND REPORT The DOE Office of Energy Efficiency and Renewable Energy (EERE)'s Advanced Manufacturing Office works with industry, small business, universities, and other stakeholders to identify and invest in emerging technologies with the potential to

  17. Bandwidth Study on Energy Use and Potential Energy Saving Opportunities in U.S. Pulp and Paper Manufacturing

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Pulp and Paper Manufacturing i , ii Bandwidth Study on Energy Use and Potential Energy Saving Opportunities in U.S. Pulp and Paper Manufacturing THE U.S. DEPARTMENT OF ENERGY (DOE)'S ADVANCED MANUFACTURING OFFICE PROVIDED FUNDING FOR THIS ANALYSIS AND REPORT The DOE Office of Energy Efficiency and Renewable Energy (EERE)'s Advanced Manufacturing Office works with industry, small business, universities, and other stakeholders to identify and invest in emerging technologies with the potential to

  18. Energy Department Announces $2 Million to Support Manufacturing of Taller

    Office of Environmental Management (EM)

    Wind Turbine Towers | Department of Energy Million to Support Manufacturing of Taller Wind Turbine Towers Energy Department Announces $2 Million to Support Manufacturing of Taller Wind Turbine Towers September 18, 2014 - 10:38am Addthis The Energy Department today announced $2 million for two organizations that will advance technologies to harness stronger winds available at higher heights, potentially increasing the amount of clean, renewable electricity the nation produces. Through

  19. Clean Energy Manufacturing Resources - Technology Maturation | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy Maturation Clean Energy Manufacturing Resources - Technology Maturation Clean Energy Manufacturing Resources - Technology Maturation Find resources to help you commercialize and market your clean energy technology or product. For technology maturation, areas to consider include regulations and standards; exporting; product testing or demonstration; energy-efficient product qualifications; and energy efficiency and performance improvements for plants. For more resources, see the

  20. Clean Energy Manufacturing Resources - Technology Feasibility | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy Feasibility Clean Energy Manufacturing Resources - Technology Feasibility Clean Energy Manufacturing Resources - Technology Feasibility Find resources to help you evaluate the feasibility of your idea for a new clean energy technology or product. For determining feasibility, areas to consider include U.S. Department of Energy (DOE) priorities, licensing, R&D funding, and strategic project partnerships. For more resources, see the Clean Energy Manufacturing Federal Resource

  1. 2014 Manufacturing Energy and Carbon Footprints: Scope

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Scope The energy and carbon footprint analysis examines fifteen individual manufacturing sectors that together consume 95% of U.S. manufacturing primary energy consumption and account for 94% of U.S. manufacturing combustion greenhouse gas (GHG) emissions. Manufacturing sectors are defined by their respective NAICS (North American Industry Classification System) codes. i Individual sectors were selected for analysis based on their relative energy intensities, contribution to the U.S. economy,

  2. Advanced Blade Manufacturing Project - Final Report

    SciTech Connect (OSTI)

    POORE, ROBERT Z.

    1999-08-01

    The original scope of the project was to research improvements to the processes and materials used in the manufacture of wood-epoxy blades, conduct tests to qualify any new material or processes for use in blade design and subsequently build and test six blades using the improved processes and materials. In particular, ABM was interested in reducing blade cost and improving quality. In addition, ABM needed to find a replacement material for the mature Douglas fir used in the manufacturing process. The use of mature Douglas fir is commercially unacceptable because of its limited supply and environmental concerns associated with the use of mature timber. Unfortunately, the bankruptcy of FloWind in June 1997 and a dramatic reduction in AWT sales made it impossible for ABM to complete the full scope of work. However, sufficient research and testing were completed to identify several promising changes in the blade manufacturing process and develop a preliminary design incorporating these changes.

  3. 2010 Manufacturing Energy and Carbon Footprints: Definitions...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy and Carbon Footprints (MECS 2010) More Documents & Publications U.S. Manufacturing Energy Use and Greenhouse Gas Emissions Analysis MECS 2006 - Computer, ...

  4. 2014 Manufacturing Energy and Carbon Footprints: Definitions...

    Broader source: Energy.gov (indexed) [DOE]

    Definitions and Assumptions A number of key terms are used to interpret the manufacturing energy and carbon footprints. The terms associated with the energy footprint analysis are ...

  5. Clean Energy Manufacturing Initiative: Increasing American Competitive...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    The SunShot Initiative's efforts to improve manufacturing of solar energy systems; The Wind Program's work on taller wind energy towers; and The Vehicle Technologies Office's ...

  6. 1991 Manufacturing Consumption of Energy 1991 Executive Summary

    U.S. Energy Information Administration (EIA) Indexed Site

    Summary The Manufacturing Consumption of Energy 1991 report presents statistics about the energy consumption of the manufacturing sector, based on the 1991 Manufacturing Energy...

  7. Energy Department Launches New Clean Energy Manufacturing Initiative |

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Department of Energy New Clean Energy Manufacturing Initiative Energy Department Launches New Clean Energy Manufacturing Initiative March 26, 2013 - 10:56am Addthis News Media Contact (202) 586-4940 OAK RIDGE - As part of the Obama Administration's commitment to revitalizing America's manufacturing sector, today the Energy Department launched the Clean Energy Manufacturing Initiative (CEMI), a new Department initiative focused on growing American manufacturing of clean energy products and

  8. FY 2015 Advanced Methods for Manufacturing Program Review Meeting

    Broader source: Energy.gov [DOE]

    The Advanced Methods for Manufacturing (AMM) program held its annual review meeting on September 29, 2015 in Arlington, Va. The purpose of this meeting was to review the 17 currently funded projects encompassing additive manufacturing, welding and joining technologies, concrete materials and rebar innovations, surface modification and cladding processes, and imaging techniques for design reconstruction. The presentations are available here.

  9. Purdue, GE Collaborate On Advanced Manufacturing | GE Global Research

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Purdue, GE to collaborate on advanced manufacturing to enable faster, efficient brilliant factories Click to email this to a friend (Opens in new window) Share on Facebook (Opens in new window) Click to share (Opens in new window) Click to share on LinkedIn (Opens in new window) Click to share on Tumblr (Opens in new window) Purdue, GE to collaborate on advanced manufacturing to enable faster, efficient brilliant factories WEST LAFAYETTE, Ind. - Purdue University announced Thursday (Dec. 4,

  10. Worldwide Energy and Manufacturing USA Inc formerly Worldwide...

    Open Energy Info (EERE)

    and Manufacturing USA Inc formerly Worldwide Manufacturing USA Jump to: navigation, search Name: Worldwide Energy and Manufacturing USA Inc (formerly Worldwide Manufacturing USA)...

  11. Advanced Manufacturing Processes Laboratory Building 878 hazards assessment document

    SciTech Connect (OSTI)

    Wood, C.; Thornton, W.; Swihart, A.; Gilman, T.

    1994-07-01

    The introduction of the hazards assessment process is to document the impact of the release of hazards at the Advanced Manufacturing Processes Laboratory (AMPL) that are significant enough to warrant consideration in Sandia National Laboratories` operational emergency management program. This hazards assessment is prepared in accordance with the Department of Energy Order 5500.3A requirement that facility-specific hazards assessments be prepared, maintained, and used for emergency planning purposes. This hazards assessment provides an analysis of the potential airborne release of chemicals associated with the operations and processes at the AMPL. This research and development laboratory develops advanced manufacturing technologies, practices, and unique equipment and provides the fabrication of prototype hardware to meet the needs of Sandia National Laboratories, Albuquerque, New Mexico (SNL/NM). The focus of the hazards assessment is the airborne release of materials because this requires the most rapid, coordinated emergency response on the part of the AMPL, SNL/NM, collocated facilities, and surrounding jurisdiction to protect workers, the public, and the environment.

  12. Wind Program Manufacturing Research Advances Processes and Reduces...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    The Wind Program's recent Taller Hub Heights to Access Higher Wind Resources and Lower the ... Energy Department Announces 2 Million to Support Manufacturing of Taller Wind Turbine ...

  13. Energy & Manufacturing Workforce Training Topics List - Version...

    Office of Environmental Management (EM)

    & Manufacturing Workforce Training Topics List - Version 1.7 (02.11.14) Energy & Manufacturing Workforce Training Topics List - Version 1.7 (02.11.14) View this searchable list of...

  14. Energy-Efficient Manufactured Homes | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Design » Types of Homes » Energy-Efficient Manufactured Homes Energy-Efficient Manufactured Homes There are many opportunities to improve the energy efficiency of manufactured homes. | Photo courtesy of ©iStockphoto.com/Marje There are many opportunities to improve the energy efficiency of manufactured homes. | Photo courtesy of ©iStockphoto.com/Marje Like site-built homes, new manufactured homes (formerly known as mobile homes) can be designed for energy efficiency and renewable energy.

  15. Clean Energy Manufacturing Initiative Midwest Regional Summit: Lightweighting Breakout Session Summary June 21, 2013

    Office of Environmental Management (EM)

    ADVANCED MANUFACTURING OFFICE Clean Energy Manufacturing Initiative Midwest Regional Summit: Lightweighting Breakout Session Summary June 21, 2013 The DOE Office of Energy Efficiency and Renewable Energy (EERE)'s Advanced Manufacturing Office works with industry, small business, universities, and other stakeholders to identify and invest in emerging technologies with the potential to create high-quality domestic manufacturing jobs and enhance the global competitiveness of the United States.

  16. Advanced Manufacture of Reflectors (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2012-09-01

    The University of Arizona is one of the 2012 SunShot CSP R&D awardees for their advanced collectors. This fact sheet explains the motivation, description, and impact of the project.

  17. A National Strategic Plan For Advanced Manufacturing

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... and is in the public domain (see 17 U.S.C. 105). ... President on Ensuring American Leadership in Advanced ... this vital sector and challenges to its continuing health. ...

  18. Advanced Manufacturing Office Update, July 2015 | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Innovation Launched 2015 Better Buildings Summit Celebrates Continued Energy and Cost Savings DOE Recognizes High-Achieving Better Plants and Superior Energy Performance...

  19. Clean Energy Manufacturing Analysis Center (CEMAC)

    SciTech Connect (OSTI)

    2015-12-01

    The U.S. Department of Energy's Clean Energy Manufacturing Analysis Center (CEMAC) provides objective analysis and up-to-date data on global supply chains and manufacturing of clean energy technologies. Policymakers and industry leaders seek CEMAC insights to inform choices to promote economic growth and the transition to a clean energy economy.

  20. Manufacturing Energy and Carbon Footprint Definitions and Assumptions...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    More Documents & Publications Understanding Manufacturing Energy and Carbon Footprints, October 2012 2010 Manufacturing Energy and Carbon Footprints:...

  1. Advanced Nuclear Energy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Nuclear Energy - Sandia Energy Energy Search Icon Sandia Home Locations Contact Us Employee Locator Energy & Climate Secure & Sustainable Energy Future Stationary Power Energy Conversion Efficiency Solar Energy Wind Energy Water Power Supercritical CO2 Geothermal Natural Gas Safety, Security & Resilience of the Energy Infrastructure Energy Storage Nuclear Power & Engineering Grid Modernization Battery Testing Nuclear Fuel Cycle Defense Waste Management Programs Advanced Nuclear

  2. Solar Manufacturing Technology 2 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Manufacturing Technology 2 Solar Manufacturing Technology 2 The PV awards span the supply chain from novel methods to make silicon wafers, to advanced cell and metallization processes, to innovative module packaging and processing. The CSP award demonstrates manufacturability of an innovative CSP reflective-trough receiver. The first round of the SolarMat program was launched in September 2013 supporting five projects. The second round, announced on October 22, 2014, funds nine photovoltaics

  3. Energy-Saving Homes, Buildings, and Manufacturing | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy-Saving Homes, Buildings, and Manufacturing Energy-Saving Homes, Buildings, and Manufacturing Buildings Buildings Read more Government Energy Management Government Energy Management Read more Homes Homes Read more Manufacturing Manufacturing Read more The Office of Energy Efficiency and Renewable Energy (EERE) leads a robust community of researchers and other partners to continually develop innovative, cost-effective energy-saving solutions, which helps make our country run better through

  4. Manufacturing Energy Consumption Survey (MECS) - U.S. Energy Information

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Administration (EIA) ‹ Consumption & Efficiency Manufacturing Energy Consumption Survey (MECS) Glossary › FAQS › Overview Data 2010 2006 2002 1998 1994 1991 Archive Analysis & Projections Cost of Natural Gas Used in Manufacturing Sector Has Fallen Graph showing Cost of Natural Gas Used in Manufacturing Sector Has Fallen Source: U.S. Energy Information Administration, Manufacturing Energy Consumption Survey (MECS) 1998-2010, September 6, 2013. New 2010 Manufacturing Energy

  5. Energy-Saving Homes, Buildings, & Manufacturing (Fact Sheet), Office of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Efficiency and Renewable Energy, U.S. Department of Energy (DOE) | Department of Energy Energy-Saving Homes, Buildings, & Manufacturing (Fact Sheet), Office of Energy Efficiency and Renewable Energy, U.S. Department of Energy (DOE) Energy-Saving Homes, Buildings, & Manufacturing (Fact Sheet), Office of Energy Efficiency and Renewable Energy, U.S. Department of Energy (DOE) This document highlights DOE's Office of Energy Efficiency and Renewable Energy's advancements in saving

  6. Advanced Renewable Energy | Open Energy Information

    Open Energy Info (EERE)

    Renewable Energy Jump to: navigation, search Name: Advanced Renewable Energy Place: Italy Sector: Biomass, Renewable Energy, Wind energy Product: Advanced Renewable Energy Ltd...

  7. Understanding Manufacturing Energy and Carbon Footprints, October 2012

    Broader source: Energy.gov (indexed) [DOE]

    Understanding Manufacturing Energy and Carbon Footprints The Manufacturing Energy and Carbon Footprints map energy use and carbon emissions from energy supply to end use. Footprints are published for 15 manufacturing sectors (representing 94% of all manufacturing energy use) and for U.S. manufacturing as a whole. These sectors are described in more detail in the document Manufacturing Energy and Carbon Footprint Scope. Manufacturing Energy and Carbon Footprint Sectors: All Manufacturing

  8. 2014 American Energy & Manufacturing Competitiveness Summit in...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Summit. Image: John Harrington, Council on Competitiveness 6 of 10 Local Motors CEO Jay Rogers demonstrates the 3D-printed car during the American Energy & Manufacturing...

  9. Derived Annual Estimates of Manufacturing Energy Consumption...

    U.S. Energy Information Administration (EIA) Indexed Site

    > Derived Annual Estimates - Executive Summary Derived Annual Estimates of Manufacturing Energy Consumption, 1974-1988 Figure showing Derived Estimates Executive Summary This...

  10. Low Energy Ion Implantationin Semiconductor Manufacturing | U...

    Office of Science (SC) Website

    Low Energy Ion Implantation in Semiconductor Manufacturing Nuclear Physics (NP) NP Home About Research Facilities Science Highlights Benefits of NP Applications of Nuclear Science ...

  11. Industrial Assessment Centers Small Manufacturers Reduce Energy...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    DOEEE-1278 Industrial Assessment Centers Small Manufacturers Reduce Energy & Increase Productivity Since 1976, the Industrial Assessment Centers (IACs), administered by the US...

  12. American Energy and Manufacturing Competitiveness Summit

    Broader source: Energy.gov [DOE]

    The American Energy and Manufacturing Competitiveness Summit will bring together leaders and perspectives from industry, government, academia, national laboratories, labor, and policy organizations...

  13. 2015 American Energy and Manufacturing Competitiveness Summit

    Broader source: Energy.gov [DOE]

    The 2015 American Energy & Manufacturing Competitiveness (AEMC) Summit is a gathering of preeminent leaders from industry, academia, labor, the national laboratories, government and media to:

  14. Advanced ceramic manufacturing of SiAlON exhaust valves

    SciTech Connect (OSTI)

    Bright, E.; Eckalbar, J.F.; McEntire, B.J.; Pujari, V.K.; Tricard, M.

    1996-09-01

    Norton Advanced Ceramic`s (NAC) is performing ceramic manufacturing development as part of the DOE-sponsored Advanced Ceramic Manufacturing Technology (ACMT) Program. NAC`s ACMT effort is focused on developing a cost effective manufacturing process for a ceramic exhaust valve. An industry team has been assembled to address cost reduction for this ceramic component. Technical progress made by NAC`s ACMT industry team in reducing the cost of ceramic valves is summarized within this communication. Particular emphasis is placed on describing progress in the development of intelligent processing systems for the powder processing, spray drying, and forming operations. Ceramic valve manufacturing process enhancements including continuous sintering, high-speed diamond grinding, and cost effective proof testing are summarized as well.

  15. Advanced Manufacturing Office Update, May 2014 | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Partners with DOE to Advance Supply Chain Energy Efficiency General Dynamics and Nissan Case Studies Highlight Benefits of Superior Energy Performance Volvo Recognized for ...

  16. Energy-Saving Homes, Buildings, & Manufacturing

    SciTech Connect (OSTI)

    2012-09-01

    This document highlights DOE's Office of Energy Efficiency and Renewable Energy's advancements in saving energy in homes, buildings, and industrial plants.

  17. Manufacturing Consumption of Energy 1994

    U.S. Energy Information Administration (EIA) Indexed Site

    the CM, the ASM contains two components. The first component is the mail portion, a probability sample of manufacturing establishments selected from the list of establishments...

  18. Articles about Manufacturing | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Manufacturing Articles about Manufacturing RSS Below are stories about manufacturing featured by the U.S. Department of Energy (DOE) Wind Program. September 17, 2015 Statistics Show Bearing Problems Cause the Majority of Wind Turbine Gearbox Failures In the past, the wind energy industry has been relatively conservative in terms of data sharing, especially with the general public, which has inhibited the research community's efforts to identify and mitigate the premature failures of wind turbine

  19. Clean Energy Manufacturing Resources - Technology Prototyping | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy Prototyping Clean Energy Manufacturing Resources - Technology Prototyping Clean Energy Manufacturing Resources - Technology Prototyping Find resources to help you design and refine a prototype of a new clean energy technology or product. For prototyping, areas to consider include materials characterization; models and tools; intellectual property protection; small-scale production; R&D funding; and regional, state, and local resources. For more resources, see the Clean Energy

  20. Energy-Efficient Manufactured Homes | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    (formerly known as mobile homes) can be designed for energy efficiency and renewable energy. You can also remodel or retrofit older manufactured homes to improve energy...

  1. Energy Department Recognizes 11 Manufacturers for Energy Efficiency

    Office of Environmental Management (EM)

    Achievements | Department of Energy 11 Manufacturers for Energy Efficiency Achievements Energy Department Recognizes 11 Manufacturers for Energy Efficiency Achievements October 2, 2014 - 1:30am Addthis News Media Contact 202-586-4940 Energy Department Recognizes 11 Manufacturers for Energy Efficiency Achievements Better Plants Partners Rack Up Energy Savings as Partnership Continues to Grow Washington, D.C.-Building on the Administration's efforts to double energy productivity and help

  2. Renewable Energy Tax Credit for Manufacturers (Personal)

    Broader source: Energy.gov [DOE]

    SB 1484 of 2014 provides a tax credit for new renewable energy systems that produce energy for self-consumption and are used primarily for manufacturing. HB 2670 of 2015 expanded this credit to i...

  3. Renewable Energy Tax Credit for Manufacturers (Corporate)

    Broader source: Energy.gov [DOE]

    SB 1484 of 2014 provides a tax credit for new renewable energy systems that produce energy for self-consumption and are used primarily for manufacturing. HB 2670 of 2015 expanded this credit to i...

  4. New Request for Information (RFI) on Clean Energy Manufacturing Topic Areas

    Broader source: Energy.gov [DOE]

    The Advanced Manufacturing Office (AMO) seeks information on mid-Technology Readiness Level (TRL) research and development (R&D) needs, market challenges, supply chain challenges, and shared facility needs for clean energy manufacturing. This new Request for Information (RFI) is a follow-on to a recently completed RFI broadly covering advanced manufacturing. AMO would now like to know more about the challenges associated with advanced manufacturing technology which potentially could be overcome by pre-competitive collaboration as part of a Clean Energy Manufacturing Innovation Institute.

  5. Clean Energy Manufacturing Initiative Partnerships | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Partnerships Clean Energy Manufacturing Initiative Partnerships The Clean Energy Manufacturing Initiative (CEMI) engages in partnerships to improve U.S. clean energy manufacturing competitiveness. Growing U.S. clean energy manufacturing competitiveness requires an "all hands on deck" approach, with the nation's private and public sectors, universities, think tanks, and labor leaders working together to identify and commit to a path forward. Initial partnerships include: Council on

  6. Advanced Energy Guides

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Guides Shanti Pless National Renewable Energy Laboratory shanti.pless@nrel.gov 303-384-6365 April 4 2013 2 | Building Technologies Office eere.energy.gov Advanced Energy Design Guides Provide prescriptive energy savings guidance and recommendations by building type and geographic location: * Design packages and strategies to help owners and designers achieve 50% site energy savings over Standard 90.1 * Two series: - 30% savings over 90.1-1999 - 50% savings over 90.1-2004 * Educational

  7. Manufacturing Energy Consumption Survey (MECS) - U.S. Energy Information

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Administration (EIA) U. S. Census Regions and Divisions: census map About the MECS Survey forms Maps MECS Terminology Archives Features First 2010 Data Press Release 2010 Data Brief Other End Use Surveys Commercial Buildings - CBECS Residential - RECS Transportation DOE Uses MECS Data Manufacturing Energy and Carbon Footprints Associated Analysis Manufacturing Energy Sankey Diagrams Manufacturing Energy Flows Tool

  8. Static Sankey Diagram Full Sector Manufacturing | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Full Sector Manufacturing Static Sankey Diagram Full Sector Manufacturing The U.S. Manufacturing Sector Static Sankey diagram shows how total primary energy is used by U.S. manufacturing plants. Click on the Onsite Generation, Process Energy or Nonprocess Energy thumbnails below the diagram to see further detail on energy flows in manufacturing. Also, see the Dynamic Manufacturing Energy Sankey Tool to pan, zoom, and customize the manufacturing Sankey data and compare energy consumption across

  9. Improving Steam System Performance: A Sourcebook for Industry, Second Edition (Book) (Revised), Advanced Manufacturing Office (AMO)

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Steam System Performance: A Sourcebook for Industry Second Edition The Office of Energy Efficiency and Renewable Energy (EERE) invests in clean energy technologies that strengthen the economy, protect the environment, and reduce dependence on foreign oil. IMPROVING STEAM SYSTEM PERFORMANCE: A SOURCEBOOK FOR INDUSTRY ACKNOWLEDGMENTS Improving Steam System Performance: A Sourcebook for Industry was developed for the U.S. Department of Energy's (DOE) Advanced Manufacturing Office (AMO), formerly

  10. Manufacturing Demonstration Facility Workshop | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    March 12, 2012 The Manufacturing Demonstration Facility Workshop (held in Chicago, IL, on March 12, 2012, and simultaneously broadcast as a webinar) invited stakeholders to discuss key foundational aspects of planning a series of Manufacturing Demonstration Facilities (MDFs). MDFs will create a collaborative, shared infrastructure around targeted technical areas that will develop, use, and promote energy efficient, rapid, flexible manufacturing technologies. Work at the MDFs will target specific

  11. Energy Department Takes First Step to Spur U.S. Manufacturing of Small

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Modular Nuclear Reactors | Department of Energy Takes First Step to Spur U.S. Manufacturing of Small Modular Nuclear Reactors Energy Department Takes First Step to Spur U.S. Manufacturing of Small Modular Nuclear Reactors January 20, 2012 - 10:48am Addthis Washington, D.C. - The U.S. Department of Energy today announced the first step toward manufacturing small modular nuclear reactors (SMRs) in the United States, demonstrating the Administration's commitment to advancing U.S. manufacturing

  12. Energy Department Takes First Step to Spur U.S. Manufacturing of Small

    Office of Environmental Management (EM)

    Modular Nuclear Reactors | Department of Energy Takes First Step to Spur U.S. Manufacturing of Small Modular Nuclear Reactors Energy Department Takes First Step to Spur U.S. Manufacturing of Small Modular Nuclear Reactors January 20, 2012 - 2:06pm Addthis The U.S. Department of Energy today announced the first step toward manufacturing small modular nuclear reactors (SMRs) in the United States, demonstrating the Administration's commitment to advancing U.S. manufacturing leadership in

  13. Clean Energy Manufacturing Initiative Southeast Regional Summit

    Broader source: Energy.gov [DOE]

    As part of the Clean Energy Manufacturing Initiative (CEMI), the U.S. Department of Energy (DOE) organizes regional summits around the country to expand its partnerships, share resources and successes, and refine its strategy to boost U.S. competitiveness in clean energy manufacturing. The CEMI Southeast Regional Summit, which will be held on July 9, 2015 at the Renaissance Atlanta Midtown Hotel in Atlanta, Georgia, is the third in this series.

  14. Energy Department Launches Bold New Clean Energy Manufacturing Initiative |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Bold New Clean Energy Manufacturing Initiative Energy Department Launches Bold New Clean Energy Manufacturing Initiative March 26, 2013 - 11:00am Addthis As part of the Energy Department's launch of the Clean Energy Manufacturing Initiative, Assistant Secretary David Danielson toured the new Carbon Fiber Facility at Oak Ridge National Laboratory. Carbon fiber has the potential to improve the fuel efficiency of vehicles. | Photo courtesy of Jason Richards, Oak Ridge

  15. New Investment in Energy-Efficient Manufacturing | Department of Energy

    Office of Environmental Management (EM)

    Investment in Energy-Efficient Manufacturing New Investment in Energy-Efficient Manufacturing March 26, 2013 - 11:30am Addthis The Energy Department is supporting new research and development projects that focus on reducing energy use and costs for U.S. manufacturers. One project is expected to dramatically reduce the cost and lower the energy needed to produce aircrafts. | Photo courtesy of ARM Climate Research Facility. The Energy Department is supporting new research and development projects

  16. Understanding the 2014 Manufacturing Energy and Carbon Footprints

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Understanding the 2010 Manufacturing Energy and Carbon Footprints The Manufacturing Energy and Carbon Footprints map energy use and combustion greenhouse gas (GHG) emissions from energy supply to end use. Footprints are published for 15 manufacturing sectors (representing 95% of all manufacturing energy use and 94% of U.S. manufacturing combustion GHG emissions) and for U.S. manufacturing as a whole (NAICS 31 - 33). These sectors are described in more detail in the document 2010 Manufacturing

  17. Process development status report for advanced manufacturing projects

    SciTech Connect (OSTI)

    Brinkman, J.R.; Homan, D.A.

    1990-03-30

    This is the final status report for the approved Advanced Manufacturing Projects for FY 1989. Five of the projects were begun in FY 1987, one in FY 1988, and one in FY 1989. The approved projects cover technology areas in welding, explosive material processing and evaluation, ion implantation, and automated manufacturing. It is expected that the successful completion of these projects well result in improved quality and/or reduced cost for components produced by Mound. Those projects not brought to completion will be continued under Process development in FY 1990.

  18. Manufacturing Energy and Carbon Footprints (2006 MECS) | Department of

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Energy Manufacturing Energy and Carbon Footprints (2006 MECS) Manufacturing Energy and Carbon Footprints (2006 MECS) Energy and Carbon Footprints provide a mapping of energy from supply to end use in manufacturing. They show us where energy is used and lost-and where greenhouse gases (GHGs) are emitted. Footprints are available below for 15 manufacturing sectors (representing 94% of all manufacturing energy use) and for U.S. manufacturing as a whole. Analysis of these footprints is also

  19. DOE Advanced Manufacturing Office EnPI V3.0 Webinar Transcription

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Advanced Manufacturing Office EnPI V3.0 Webinar Transcription December 11, 2012 Lindsay Southerland: Good Afternoon. My name is Lindsay Southerland and I'm with BCS, Incorporated. It is my pleasure to welcome you to this afternoon's webcast, which is sponsored by the U.S. Department of Energy's Advanced Manufacturing Office, or AMO for short. Today's presenters are Andre de Fontaine of AMO and Ashly Spevacek of the Project Performance Corporation. Ashly and Andre will provide an overview and

  20. 3 Ways Our Manufacturing Institutes Are Changing the Clean Energy Game |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Our Manufacturing Institutes Are Changing the Clean Energy Game 3 Ways Our Manufacturing Institutes Are Changing the Clean Energy Game September 24, 2015 - 3:30pm Addthis National Network for Manufacturing Innovation institute Power America focuses on advanced power electronics based on wide bandgap semiconductors. Learn how wide bandgap semiconductors could impact clean energy technology and our daily lives. | Video by Sarah Gerrity and Matty Greene, Energy Department.

  1. Manufacturing Energy and Carbon Footprint - Sector: Transportation...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    2.4 2.6 < 0.1 Manufacturing Energy and Carbon Footprint Sector: Transportation ... Steam Distribution Losses 1 3 23 1 3 7 6 23 16 0 3 0 275 44 132 0 1 2 Conventional Boilers ...

  2. Energy Department Supports Manufacturing Day | Department of...

    Energy Savers [EERE]

    he is discussing technologies such as additive manufacturing, better known as 3D-printing, an energy-efficient technology with potential to change the way we think about...

  3. Advanced Manufacturing Office: Case Study - The Challenge: Improving Sewage Pump System Performance

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Municipal Sewage System Process: Sewage Pumping System: Pump System Technology: Downsized pump, direct on-line pump controls Project Profile SIC: 4952 Products: Sewage Pumping Location: Trumbull, Connecticut Showcase Team Leaders: Paul Kallmeyer, Town of Trumbull Three employees in the wastewater treatment department. Town of Trumbull U.S. Department of Energy - Energy Efficiency and Renewable Energy Advanced Manufacturing Office Case Study - The Challenge: Improving Sewage Pump System

  4. American Energy and Manufacturing Competitiveness Summit

    Broader source: Energy.gov [DOE]

    The 2015 American Energy and Manufacturing Competitiveness Summit will be hosted September 15–16; this gathering of preeminent leaders from industry, academia, labor, the national laboratories, government, and media aims to increase American competitiveness in clean energy and manufacturing. Bioenergy Technologies Office Technology Manager Jay Fitzgerald will be representing the Office, and the Lawrence Berkeley National Lab will be exhibiting a special hands-on demonstration of the latest bioenergy equipment, models, and other research, development, and demonstration tools.

  5. Goodman Manufacturing Company Comment | Department of Energy

    Energy Savers [EERE]

    Goodman Manufacturing Company Comment Goodman Manufacturing Company Comment These comments are submitted by Goodman Global, Inc. ("Goodman") in response to the U.S. Department of Energy's (DOE) request for information (RFI) appearing in the Federal Register on July 3, 2014. PDF icon 07-18-2014 Goodman Comments on Regulatory Burden RFI.PDF More Documents & Publications 2014-06-25 Issuance: Energy Conservation Standards for Residential Furnace Fans; Final Rule ISSUANCE 2015-08-21:

  6. Goodman Manufacturing Company Comment | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Goodman Manufacturing Company Comment Goodman Manufacturing Company Comment These comments are submitted by Goodman Global, Inc. ("Goodman") in response to the U.S. Department of Energy's (DOE) request for information (RFI) appearing in the Federal Register on July 3, 2014. PDF icon 07-18-2014 Goodman Comments on Regulatory Burden RFI.PDF More Documents & Publications 2014-06-25 Issuance: Energy Conservation Standards for Residential Furnace Fans; Final Rule 2014-08-28 Issuance:

  7. Manufacturing Consumption of Energy 1994

    U.S. Energy Information Administration (EIA) Indexed Site

    A24. Total Inputs of Energy for Heat, Power, and Electricity Generation by Program Sponsorship, Industry Group, Selected Industries, and Type of Energy- Management Program, 1994:...

  8. Understanding Manufacturing Energy and Carbon Footprints, October 2012 |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Understanding Manufacturing Energy and Carbon Footprints, October 2012 Understanding Manufacturing Energy and Carbon Footprints, October 2012 PDF icon understanding_energy_footprints_2012.pdf More Documents & Publications Understanding the 2010 Manufacturing Energy and Carbon Footprints U.S. Manufacturing Energy Use and Greenhouse Gas Emissions Analysis MECS 2006 - Cement

  9. Energy Department to Work with National Association of Manufacturers...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department to Work with National Association of Manufacturers to Increase Industrial Energy Efficiency Energy Department to Work with National Association of Manufacturers to ...

  10. Ningxia Yinxing Energy PV Power Equipment Manufacturing Co Ltd...

    Open Energy Info (EERE)

    Yinxing Energy PV Power Equipment Manufacturing Co Ltd Jump to: navigation, search Name: Ningxia Yinxing Energy PV Power Equipment Manufacturing Co Ltd Place: Yinchuan, Ningxia...

  11. Metal and Glass Manufacturers Reduce Costs by Increasing Energy...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Metal and Glass Manufacturers Reduce Costs by Increasing Energy Efficiency in Process Heating Systems Metal and Glass Manufacturers Reduce Costs by Increasing Energy Efficiency in...

  12. Advanced Nuclear Energy Projects | Department of Energy

    Energy Savers [EERE]

    Projects Advanced Nuclear Energy Projects Advanced Nuclear Energy Projects Advanced Nuclear Energy Projects Advanced Nuclear Energy Projects Advanced Nuclear Energy Projects ADVANCED NUCLEAR ENERGY 1 PROJECT in 1 LOCATION 2,200 MW GENERATION CAPACITY 17,200,000 MWh PROJECTED ANNUAL GENERATION * 10,000,000 METRIC TONS OF CO2 EMISSIONS PREVENTED ANNUALLY ALL FIGURES AS OF MARCH 2015 * Calculated using the project's and NREL Technology specific capacity factors. For cases in which NREL's capacity

  13. Secretary Bodman Highlights Advanced Energy Initiative in Peoria, IL |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Advanced Energy Initiative in Peoria, IL Secretary Bodman Highlights Advanced Energy Initiative in Peoria, IL April 6, 2006 - 10:15am Addthis PEORIA, IL - Secretary of Energy Samuel W. Bodman today highlighted the goals of President Bush's Advanced Energy Initiative after consulting on an energy savings assessment at Caterpillar Inc.'s manufacturing facility in Peoria, Illinois. To answer President Bush's call for Americans to be more energy efficient, the Department of

  14. CLEAN VEHICLE MANUFACTURING | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    DOE-LPO_Illustrated-Posters_02_ATVM_Full.pdf More Documents & Publications ECONOMIC DEVELOPMENT GEOTHERMAL POWER ADVANCED NUCLEAR ENERGY

  15. NREL: Energy Analysis - Manufacturing Analysis

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Energy Analysis Home Capabilities & Expertise Key Activities Analysis of Project Finance ... Supply Constraints Analysis Workforce Development Analysis Resource Assessment Models & ...

  16. Advanced Energy Retrofit Guides | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    implemented similar measures in commercial buildings. All of the AERGs are available for free download: Advanced Energy Retrofit Guide for Office Buildings Advanced Energy...

  17. Advanced Energy Company | Open Energy Information

    Open Energy Info (EERE)

    Company Jump to: navigation, search Name: Advanced Energy Company Place: Japan Product: Established March 19, 2010, Advanced Energy Company (AEC) aims to install EV power stations...

  18. Manufacturing Energy and Carbon Footprint Definitions and Assumptions,

    Office of Environmental Management (EM)

    October 2012 | Department of Energy Definitions and Assumptions, October 2012 Manufacturing Energy and Carbon Footprint Definitions and Assumptions, October 2012 PDF icon footprints_assumptions_definitions_2012.pdf More Documents & Publications Understanding Manufacturing Energy and Carbon Footprints, October 2012 2010 Manufacturing Energy and Carbon Footprints: Definitions and Assumptions U.S. Manufacturing Energy Use and Greenhouse Gas Emissions Analysis

  19. Manufacturing Consumption of Energy 1994

    U.S. Energy Information Administration (EIA) Indexed Site

    in hydro- power. During that time period, there was an unusual number of hydropower projects up for license renewal by the Federal Energy Regulatory Commission; hydropower...

  20. Clean Energy Manufacturing Initiative News | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Clean Energy Manufacturing Initiative News Clean Energy Manufacturing Initiative News January 7, 2016 Clean Energy Manufacturing Initiative News In Case You Missed Them: Our Top Blog Posts from December As we start the new year, we're taking a look back at December 2015--our top blog posts and some favorites we want to share with you. Happy New Year! December 30, 2015 Argonne National Laboratory and Capstone Turbine Corporation are exploring using microturbines in combined heat and power (CHP)

  1. Understanding the 2010 Manufacturing Energy and Carbon Footprints |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Understanding the 2010 Manufacturing Energy and Carbon Footprints Understanding the 2010 Manufacturing Energy and Carbon Footprints This five-page document provides detailed instruction to read and understand the Manufacturing Energy and Carbon Footprints (MECS 2010) PDF icon Understanding Energy and Carbon Footprints More Documents & Publications U.S. Manufacturing Energy Use and Greenhouse Gas Emissions Analysis Understanding Manufacturing Energy and Carbon

  2. Manufacturing Energy Consumption Survey (MECS) - Analysis & Projections -

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    U.S. Energy Information Administration (EIA) Manufacturing Energy Consumption Data Show Large Reductions in Both Manufacturing Energy Use and the Energy Intensity of Manufacturing Activity between 2002 and 2010 MECS 2010 - Release date: March 19, 2013 Total energy consumption in the manufacturing sector decreased by 17 percent from 2002 to 2010 (Figure 1), according to data from the U.S. Energy Information Administration's (EIA) Manufacturing Energy Consumption Survey (MECS). line chart:air

  3. Clean Energy Manufacturing Initiative Southeast Regional Summit

    Broader source: Energy.gov [DOE]

    Registration is now open for the Clean Energy Manufacturing Initiatives (CEMI) Southeast Regional Summit! The all-day conference, hosted by the U.S. Department of Energy (DOE), will take place on July 9 in Atlanta, Georgia, at the Renaissance Atlanta Midtown Hotel. The Southeast Regional Summit will bring together leaders from industry, academia, and government to focus on competitiveness and innovation in clean energy manufacturing throughout the southeastern United States. The Summit is the third in a series organized around the country, and will convene key stakeholders to:

  4. Energy Department Supports Manufacturing Day | Department of Energy

    Office of Environmental Management (EM)

    Supports Manufacturing Day Energy Department Supports Manufacturing Day October 2, 2015 - 2:09pm Addthis Students participate in FirstBuild's "hackathon" event Friday, October 2, in Louisville, Kentucky as part of Manufacturing Day. Image courtesy Deloitte. Students participate in FirstBuild's "hackathon" event Friday, October 2, in Louisville, Kentucky as part of Manufacturing Day. Image courtesy Deloitte. What are the key facts? To celebrate American industry, today we join

  5. Manufacturing Innovation in the DOE

    Office of Environmental Management (EM)

    Manufacturing Innovation in the DOE January 13, 2014 Mark Johnson Director Advanced Manufacturing Office manufacturing.energy.gov Advanced Manufacturing Office (AMO) manufacturing.energy.gov 2 What is Advanced Manufacturing? A family of activities that: * Depend on the use and coordination of information, automation, computation, software, sensing, and networking; and/or * Make use of cutting edge materials and emerging capabilities. Advanced Manufacturing involves both: * New ways to

  6. Clean Energy Manufacturing Initiative Industrial Efficiency and Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Productivity Video | Department of Energy Industrial Efficiency and Energy Productivity Video Clean Energy Manufacturing Initiative Industrial Efficiency and Energy Productivity Video Addthis Description Industrial efficiency and low-cost energy resources are key components to increasing U.S. energy productivity and makes the U.S. manufacturing sector more competitive. Companies find a competitive advantage in implementing efficiency technologies and practices, and technologies developed and

  7. Manufacturing Consumption of Energy 1994

    U.S. Energy Information Administration (EIA) Indexed Site

    , X Y X X M. Hansen, W. Hurwitz, and W. Madlow, "Sample and Survey Methods and Theory, Volume I" (New York: John Wiley & Sons, Inc., 1953), 49 p. 166. 440 Energy...

  8. Manufacturing Consumption of Energy 1994

    U.S. Energy Information Administration (EIA) Indexed Site

    A9. Total Inputs of Energy for Heat, Power, and Electricity Generation by Fuel Type, Census Region, and End Use, 1994: Part 1 (Estimates in Btu or Physical Units) See footnotes at...

  9. Energy-Saving Homes, Buildings, & Manufacturing (Fact Sheet)...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy-Saving Homes, Buildings, & Manufacturing (Fact Sheet), Office of Energy Efficiency and Renewable Energy, U.S. Department of Energy (DOE) Energy-Saving Homes, Buildings, & ...

  10. Clean Energy Manufacturing Initiative: Regional and National Summit Series

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    | Department of Energy Clean Energy Manufacturing Initiative: Regional and National Summit Series Clean Energy Manufacturing Initiative: Regional and National Summit Series The Clean Energy Manufacturing Initiative (CEMI) is a Department of Energy initiative focused on increasing American competitiveness in Clean Energy Manufacturing. CEMI is hosting a series of regional and national summits to gather input on manufacturing priorities, identify barriers and opportunities for growing clean

  11. Celebrating Two Years of Building America's Clean Energy Manufacturing

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Future | Department of Energy Two Years of Building America's Clean Energy Manufacturing Future Celebrating Two Years of Building America's Clean Energy Manufacturing Future March 27, 2015 - 3:23pm Addthis Watch the video above to find out how the federal government and private sector partners are working together to strengthen U.S. clean energy manufacturing competitiveness. | Video courtesy of the Clean Energy Manufacturing Initiative. It's an exciting time for clean energy manufacturing

  12. 2010 Manufacturing Energy and Carbon Footprints: Scope | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Scope 2010 Manufacturing Energy and Carbon Footprints: Scope This five-page document provides detailed descriptions of the manufacturing sectors examined in the Energy and Carbon Footprints (MECS 2010) PDF icon Scope of the Manufacturing Energy and Carbon Footprints (MECS 2010) More Documents & Publications Manufacturing Energy and Carbon Footprints Scope End-Use Sector Flowchart U.S. Manufacturing Energy Use and Greenhouse Gas Emissions Analysis

  13. Public-Private Partnerships for Clean Energy Manufacturing Fact Sheet |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Public-Private Partnerships for Clean Energy Manufacturing Fact Sheet Public-Private Partnerships for Clean Energy Manufacturing Fact Sheet PDF icon Public-Private Partnerships for Clean Energy Manufacturing More Documents & Publications Introduction to CEMI Fact Sheet Process Intensification Workshop - September 29-30, 2015 Manufacturing Demonstration Facility Workshop

  14. Fact Sheet: Energy Storage Technology Advancement Partnership...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Technology Advancement Partnership (October 2012) Fact Sheet: Energy Storage Technology Advancement Partnership (October 2012) The Energy Storage Technology Advancement Partnership ...

  15. Energy-Saving Homes, Buildings, and Manufacturing Success Stories |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Energy-Saving Homes, Buildings, and Manufacturing Success Stories Energy-Saving Homes, Buildings, and Manufacturing Success Stories Energy-Saving Homes, Buildings, and Manufacturing Success Stories The Office of Energy Efficiency and Renewable Energy's (EERE) successes in converting tax dollars into more efficient energy solutions for our nation's buildings and manufacturing supply lines mean large-scale energy and cost savings. Learn how EERE's investments in energy

  16. Energy Systems Integration: NREL + Advanced Energy (Fact Sheet), NREL (National Renewable Energy Laboratory)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ADVANCED ENERGY Solar inverter manufacturer Advanced Energy Industries is using the ESIF's Power Systems Integration Laboratory (PSIL) to test its advanced photovoltaic (PV) inverter technology with the ESIF's power hardware-in-the-loop system and megawatt- scale grid simulators. Solar inverters are responsible for a number of critical functions within a solar PV system, including converting the direct current output into alternating current for the grid. Advanced Energy's inverter will help

  17. Coatings and Process Development for Reduced Energy Automotive OEM Manufacturing

    Broader source: Energy.gov (indexed) [DOE]

    Furar, PPG Industries, Inc. U.S. DOE Advanced Manufacturing Office Program Review Meeting Washington, D.C. May 28-29, 2015 1 This presentation does not contain any proprietary, confidential, or otherwise restricted information. Project Objective  Develop coatings, processes and facility design to reduce energy consumption in automotive OEM paint shops  Technical Barriers  Maintaining coating properties at lower temperature cure  Low temperature cross-link chemistries not commercial

  18. DOE Distributes Energy-Saving Tools to Help Manufacturers Save...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Distributes Energy-Saving Tools to Help Manufacturers Save Energy DOE Distributes Energy-Saving Tools to Help Manufacturers Save Energy July 26, 2006 - 4:41pm Addthis WASHINGTON, ...

  19. Energy Department Announces $10 Million to Advance Innovative,

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy-Saving Lighting Technologies | Department of Energy $10 Million to Advance Innovative, Energy-Saving Lighting Technologies Energy Department Announces $10 Million to Advance Innovative, Energy-Saving Lighting Technologies December 6, 2013 - 1:48pm Addthis As part of cutting energy waste and doubling energy productivity by 2030, the Energy Department today announced nearly $10 million to support research, development, and manufacturing of solid-state lighting (SSL) technologies across

  20. Revitalizing Innovation in Michigan for Clean Energy Manufacturing |

    Energy Savers [EERE]

    Department of Energy Revitalizing Innovation in Michigan for Clean Energy Manufacturing Revitalizing Innovation in Michigan for Clean Energy Manufacturing April 25, 2011 - 4:33pm Addthis Senator Debbie Stabenow at the Revitalizing Innovation in Michigan for Clean Energy Manufacturing Workshop Senator Debbie Stabenow at the Revitalizing Innovation in Michigan for Clean Energy Manufacturing Workshop Kerry Duggan Kerry Duggan What does this mean for me? Michigan has expanded its manufacturing

  1. Clean Energy Manufacturing Initiative Industrial Efficiency and Energy Productivity

    ScienceCinema (OSTI)

    Selldorff, John; Atwell, Monte

    2014-12-03

    Industrial efficiency and low-cost energy resources are key components to increasing U.S. energy productivity and makes the U.S. manufacturing sector more competitive. Companies find a competitive advantage in implementing efficiency technologies and practices, and technologies developed and manufactured in the U.S. enable greater competitiveness economy-wide.

  2. Clean Energy Manufacturing Initiative Industrial Efficiency and Energy Productivity

    SciTech Connect (OSTI)

    Selldorff, John; Atwell, Monte

    2014-09-23

    Industrial efficiency and low-cost energy resources are key components to increasing U.S. energy productivity and makes the U.S. manufacturing sector more competitive. Companies find a competitive advantage in implementing efficiency technologies and practices, and technologies developed and manufactured in the U.S. enable greater competitiveness economy-wide.

  3. Manufacturing Energy and Carbon Footprints (2010 MECS) | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Manufacturing Energy and Carbon Footprints (2010 MECS) Manufacturing Energy and Carbon Footprints (2010 MECS) Energy and carbon footprints map energy use and carbon emissions in manufacturing from energy supply to end use. The footprints show where energy is used and lost-and the associated greenhouse gases (GHGs) that are emitted. Each footprint visualizes the flow of energy (in the form of fuel, electricity, or steam) to major end uses in manufacturing, including boilers, power

  4. Request for Information (RFI): Specific Clean Energy Manufacturing...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    (RFI): Specific Clean Energy Manufacturing Focus Areas Suitable for a Manufacturing Innovation Institute August 29, 2014 - 10:13am Addthis Funding: This RFI is not a Funding...

  5. 20% Wind Energy by 2030 - Chapter 3: Manufacturing, Materials...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    3: Manufacturing, Materials, and Resources Summary Slides 20% Wind Energy by 2030 - Chapter 3: Manufacturing, Materials, and Resources Summary Slides Summary Slides for Chapter 3: ...

  6. Indian Wind Turbine Manufacturers Association | Open Energy Informatio...

    Open Energy Info (EERE)

    Turbine Manufacturers Association Jump to: navigation, search Name: Indian Wind Turbine Manufacturers Association Place: Chennai, India Zip: 600 041 Sector: Wind energy Product:...

  7. Iskra Wind Turbine Manufacturers Ltd | Open Energy Information

    Open Energy Info (EERE)

    Iskra Wind Turbine Manufacturers Ltd Jump to: navigation, search Name: Iskra Wind Turbine Manufacturers Ltd Place: Nottingham, United Kingdom Sector: Wind energy Product: Iskra...

  8. Miracle Wind Power Components Manufacture Co Ltd | Open Energy...

    Open Energy Info (EERE)

    Wind Power Components Manufacture Co Ltd Jump to: navigation, search Name: Miracle Wind Power Components Manufacture Co Ltd Place: Wuxi, Jiangsu Province, China Sector: Wind energy...

  9. Energy Department Announces $2 Million to Support Manufacturing...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    2 Million to Support Manufacturing of Taller Wind Turbine Towers Energy Department Announces 2 Million to Support Manufacturing of Taller Wind Turbine Towers September 17, 2014 - ...

  10. A.J. Rose Manufacturing Company | Open Energy Information

    Open Energy Info (EERE)

    search Name: A.J. Rose Manufacturing Company Address: 38000 Chester Road Place: Avon, OH Zip: 44011 Sector: Renewable Energy Product: Manufacturing Phone Number:...

  11. Sandia Energy - 2015 Wind Turbine Blade ManufactureConference...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    5 Wind Turbine Blade Manufacture Conference-Dusseldorf, Germany Home Wind Energy Conferences Wind News 2015 Wind Turbine Blade Manufacture Conference-Dusseldorf, Germany Previous...

  12. Advanced Solar Photonics | Open Energy Information

    Open Energy Info (EERE)

    Advanced Solar Photonics Place: Lake Mary, Florida Zip: 32746 Product: Florida-based thin film PV module manufacturer. References: Advanced Solar Photonics1 This article is...

  13. Advanced Energy Systems Ltd | Open Energy Information

    Open Energy Info (EERE)

    Systems Ltd Place: Welshpool, Western Australia, Australia Zip: 6016 Sector: Solar, Wind energy Product: Manufacturer and distributor of micro wind turbines, solar systems, gas...

  14. Advanced Critical Advanced Energy Retrofit Education and Training...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Critical Advanced Energy Retrofit Education and Training and Credentialing - 2014 BTO Peer Review Advanced Critical Advanced Energy Retrofit Education and Training and...

  15. PEM Stack Manufacturing: Industry Status | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Stack Manufacturing: Industry Status PEM Stack Manufacturing: Industry Status Presented at the NREL Hydrogen and Fuel Cell Manufacturing R&D Workshop in Washington, DC, August 11-12, 2011. PDF icon PEM Stack Manufacturing: Industry Status More Documents & Publications Fuel Cell Manufacturing: American Energy and Manufacturing Competitiveness Summit Low Temperature PEM Fuel Cell Manufacturing Needs A Total Cost of Ownership Model for Low Temperature PEM Fuel Cells in Combined Heat and

  16. DYNAMIC MANUFACTURING ENERGY SANKEY TOOL (2010, UNITS: TRILLION BTU) |

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Department of Energy Information Resources » Energy Analysis » DYNAMIC MANUFACTURING ENERGY SANKEY TOOL (2010, UNITS: TRILLION BTU) DYNAMIC MANUFACTURING ENERGY SANKEY TOOL (2010, UNITS: TRILLION BTU) About the Energy Data Use this diagram to explore (zoom, pan, select) and compare energy flows across U.S. manufacturing and key subsectors. Line widths indicate the volume of energy flow in trillions of British thermal units (TBtu). The 15 manufacturing subsectors together consume 95% of all

  17. New CEMAC Report Examines Global Dynamics of Energy Manufacturing |

    Energy Savers [EERE]

    Department of Energy CEMAC Report Examines Global Dynamics of Energy Manufacturing New CEMAC Report Examines Global Dynamics of Energy Manufacturing March 11, 2016 - 1:14pm Addthis New CEMAC Report Examines Global Dynamics of Energy Manufacturing David Danielson David Danielson Assistant Secretary for Energy Efficiency and Renewable Energy The Clean Energy Manufacturing Analysis Center's (CEMAC) first annual Research Highlights report offers fresh insights on key challenges and opportunities

  18. Leadership Perspectives: The Opportunity for Clean Energy Manufacturing |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Leadership Perspectives: The Opportunity for Clean Energy Manufacturing Leadership Perspectives: The Opportunity for Clean Energy Manufacturing Addthis Description There is a tremendous opportunity for the United States to manufacture clean energy and energy efficiency products. Leaders from U.S. industry and the U.S. Department of Energy (DOE) discuss the vision for a U.S. clean energy manufacturing future as well as factors that exist today that point to the potential

  19. Ensuring American Leadership in Clean Energy Manufacturing | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy American Leadership in Clean Energy Manufacturing Ensuring American Leadership in Clean Energy Manufacturing December 11, 2013 - 1:40pm Addthis Manufacturing is the bedrock of the American economy, representing nearly 12 percent of our gross domestic product and providing good, high-paying jobs for middle class families. That's why the Energy Department is working to boost U.S. manufacturing competitiveness. | Photo courtesy of Alcoa. Manufacturing is the bedrock of the American

  20. Influence of Manufacturing Processes and Microstructures on the Performance and Manufacturability of Advanced High Strength Steels

    SciTech Connect (OSTI)

    Choi, Kyoo Sil; Liu, Wenning N.; Sun, Xin; Khaleel, Mohammad A.

    2009-10-01

    Advanced high strength steels (AHSS) are performance-based steel grades and their global material properties can be achieved with various steel chemistries and manufacturing processes, leading to various microstructures. In this paper, we investigate the influence of supplier variation and resulting microstructure difference on the overall mechanical properties as well as local formability behaviors of advanced high strength steels (AHSS). For this purpose, we first examined the basic material properties and the transformation kinetics of TRansformation Induced Plasticity (TRIP) 800 steels from three different suppliers under different testing temperatures. The experimental results show that there is a significant supplier (i.e., manufacturing process) dependency of the TRIP 800 steel mechanical and microstructure properties. Next, we examined the local formability of two commercial Dual Phase (DP) 980 steels during stamping process. The two commercial DP 980 steels also exhibit noticeably different formability during stamping process in the sense that one of them shows severe tendency for shear fracture. Microstructure-based finite element analyses are carried out next to simulate the localized deformation process with the two DP 980 microstructures, and the results suggest that the possible reason for the difference in formability lies in the morphology of the hard martensite phase in the DP microstructure.

  1. National Network for Manufacturing Innovation | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    National Network for Manufacturing Innovation National Network for Manufacturing Innovation Image of Energy Department's Assistant Secretary David Danielson standing at podium speaking in front of workshop participants. The National Network for Manufacturing Innovation (NNMI) is an interagency initiative made up of public/private partnerships devoted to manufacturing excellence. Under the NNMI, each institute will bring together innovative manufacturers, university engineering schools, community

  2. Webinar: Overview of the Clean Energy Manufacturing Analysis Center

    Broader source: Energy.gov [DOE]

    As part of the Clean Energy Manufacturing Initiative, the U.S. Department of Energy recently launched the Clean Energy Manufacturing Analysis Center (CEMAC). CEMAC is a collaboration across the...

  3. Clean Energy Manufacturing Initiative Current Activities | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Current Activities Clean Energy Manufacturing Initiative Current Activities The Clean Energy Manufacturing Initiative (CEMI) takes concrete actions to build momentum around American innovation, growth, and competitiveness in clean energy manufacturing. Activity areas include technology research and development (R&D); new innovation models; competitiveness analysis; stakeholder engagement; and energy productivity technical assistance. Technology Research and Development Investment

  4. Northeast Energy Efficiency Partnerships: Advanced Lighting Controls...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Northeast Energy Efficiency Partnerships: Advanced Lighting Controls Northeast Energy Efficiency Partnerships: Advanced Lighting Controls Credit: Northeast Energy Efficiency ...

  5. Northeast Energy Efficiency Partnerships: Advanced Lighting Controls...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Northeast Energy Efficiency Partnerships: Advanced Lighting Controls Northeast Energy Efficiency Partnerships: Advanced Lighting Controls Credit: Northeast Energy Efficiency...

  6. Revolutionizing Clean Energy Technology with Advanced Composites |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Revolutionizing Clean Energy Technology with Advanced Composites Revolutionizing Clean Energy Technology with Advanced Composites Addthis

  7. Teksun PV Manufacturing Inc | Open Energy Information

    Open Energy Info (EERE)

    Teksun PV Manufacturing Inc Jump to: navigation, search Logo: Teksun PV Manufacturing Inc Name: Teksun PV Manufacturing Inc Address: 401 Congress Ave Place: Austin, Texas Zip:...

  8. Fuel Cell Technologies Office American Energy and Manufacturing Competitiveness Parternship: Fuel Cell Manufacturing

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    2/19/2013 eere.energy.gov Fuel Cell Technologies Office American Energy & Manufacturing Competitiveness Partnership http://www.aemcsummit.compete.org/ Fuel Cell Manufacturing Dr. Sunita Satyapal Director, Fuel Cell Technologies Office Dr. Nancy Garland Technology Development Manager, Manufacturing R&D, Fuel Cell Technologies Office 2 | Fuel Cell Technologies Program Source: US DOE 12/19/2013 eere.energy.gov The Future of Fuel Cell Manufacturing Panel Session * Federal program: DOE Fuel

  9. Clean Energy Manufacturing Federal Resource Guide | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Clean Energy Manufacturing Federal Resource Guide Clean Energy Manufacturing Federal Resource Guide Find federal resources to help you design, scale up, and commercialize your technology with this guide. Technology Feasibility Evaluate your idea U.S. Department of Energy priorities R&D funding Business creation and development Licensing technologies Strategic partnerships Technology Prototyping Materials characterization Modeling and tools Intellectual property protection Product testing and

  10. Advanced Energy Design Guides | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Commercial Buildings » Design & Decision Support Tools » Advanced Energy Design Guides Advanced Energy Design Guides Cover of Advanced Energy Design Guide for Small to Medium Office Buildings The 50% AEDGs provide practical approaches to achieve 50% energy savings compared to base code requirements. Download them free from ASHRAE: Small to Medium Office Buildings K-12 School Buildings Medium to Big Box Retail Buildings Large Hospitals Grocery Stores The Advanced Energy Design Guides

  11. Oak Ridge Manufacturing Demonstration Facility (MDF) | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Facilities » Oak Ridge Manufacturing Demonstration Facility (MDF) Oak Ridge Manufacturing Demonstration Facility (MDF) The Manufacturing Demonstration Facility (MDF) is a collabora-tive manufacturing community that shares a common RD&D infrastructure. This shared infrastructure provides affordable access to advanced physical and virtual tools for rapidly demonstrating new manufacturing technologies and optimizing critical processes. Oak Ridge National Laboratory is home to AMO's MDF focused

  12. Manufacturing Energy Consumption Survey (MECS) - Residential - U.S. Energy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Information Administration (EIA) Early-release estimates from the 2010 MECS show that energy consumption in the manufacturing sector decreased between 2006 and 2010 MECS 2006-2010 - Release date: March 28, 2012 Energy consumption in the U.S. manufacturing sector fell from 21,098 trillion Btu (tBtu) in 2006 to 19,062 tBtu in 2010, a decline of almost 10 percent, based on preliminary estimates released from the 2010 Manufacturing Energy Consumption Survey (MECS). This decline continues the

  13. Request for Information (RFI): Specific Clean Energy Manufacturing Focus

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Areas Suitable for a Manufacturing Innovation Institute | Department of Energy Request for Information (RFI): Specific Clean Energy Manufacturing Focus Areas Suitable for a Manufacturing Innovation Institute Request for Information (RFI): Specific Clean Energy Manufacturing Focus Areas Suitable for a Manufacturing Innovation Institute August 29, 2014 - 10:13am Addthis Funding: This RFI is not a Funding Opportunity Announcement (FOA); therefore, EERE is not accepting applications at this

  14. Request for Information (RFI): Clean Energy Manufacturing Topics Suitable

    Energy Savers [EERE]

    for a Manufacturing Innovation Institute | Department of Energy Clean Energy Manufacturing Topics Suitable for a Manufacturing Innovation Institute Request for Information (RFI): Clean Energy Manufacturing Topics Suitable for a Manufacturing Innovation Institute April 17, 2014 - 11:04am Addthis Funding: This RFI is not a Funding Opportunity Announcement (FOA); therefore, EERE is not accepting applications at this time. Open Date: 04/17/2014 Close Date: 05/20/2014 Funding Organization: The

  15. Advanced Li-Ion Polymer Battery Cell Manufacturing Plant in USA...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Li-Ion Polymer Battery Cell Manufacturing Plant in USA Advanced Li-Ion Polymer Battery Cell Manufacturing Plant in USA 2012 DOE Hydrogen and Fuel Cells Program and Vehicle ...

  16. Semiconductor Manufacturing International Corp SMIC | Open Energy...

    Open Energy Info (EERE)

    Manufacturing International Corp SMIC Jump to: navigation, search Name: Semiconductor Manufacturing International Corp (SMIC) Place: Shanghai, Shanghai Municipality, China Zip:...

  17. Clean Energy Manufacturing Initiative Midwest Regional Summit...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Breakout Session Summary More Documents & Publications Fiber Reinforced Polymer Composite Manufacturing Workshop Multimaterial Joining Workshop Manufacturing Innovation ...

  18. Nakagawa Electric Machinery Manufacturer | Open Energy Information

    Open Energy Info (EERE)

    navigation, search Name: Nakagawa Electric Machinery Manufacturer Place: Saku, Nagano, Japan Product: A company engages in electrical equipment manufacture. Coordinates:...

  19. Energy Information Administration (EIA)- Manufacturing Energy Consumption

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Survey (MECS) Steel Analysis Brief Chemical Industry Analysis Brief Change Topic: Steel | Chemical JUMP TO: Introduction | Energy Consumption | Energy Expenditures | Producer Prices and Production | Energy Intensity | Energy Management Activities | Fuel Switching Capacity Introduction The chemical industries are a cornerstone of the U.S. economy, converting raw materials such as oil, natural gas, air, water, metals, and minerals into thousands of various products. Chemicals are key materials

  20. Manufacturing Energy and Carbon Footprints Scope | Department of Energy

    Energy Savers [EERE]

    Footprints Scope Manufacturing Energy and Carbon Footprints Scope PDF icon footprint_scope.pdf More Documents & Publications Microsoft Word - Horizon Wind Energy Comments.docx Proceedings of the Computational Needs for the Next Generation Electric Grid Workshop, April 19-20, 2011 Before the House Energy and Commerce Subcommittee on Energy and Power

  1. Bandwidth Study U.S. Chemical Manufacturing | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Chemical Manufacturing Bandwidth Study U.S. Chemical Manufacturing Chemicals.jpg Energy bandwidth studies of U.S. manufacturing sectors can serve as foundational references in framing the range (or bandwidth) of potential energy savings opportunities. This bandwidth study examines energy consumption and potential energy savings opportunities in U.S. chemical manufacturing. The study relies on multiple sources to estimate the energy used in the production of 74 individual chemicals, representing

  2. 2010 Manufacturing Energy and Carbon Footprints: Definitions and

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Assumptions | Department of Energy Definitions and Assumptions 2010 Manufacturing Energy and Carbon Footprints: Definitions and Assumptions This 13-page document defines key terms and details assumptions and references used in the Manufacturing Energy and Carbon Footprints (2010 MECS) PDF icon Definitions and Assumptions for the Manufacturing Energy and Carbon Footprints (MECS 2010) More Documents & Publications U.S. Manufacturing Energy Use and Greenhouse Gas Emissions Analysis MECS

  3. Bandwidth Study U.S. Chemical Manufacturing | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    of potential energy savings opportunities. This bandwidth study examines energy consumption and potential energy savings opportunities in U.S. chemical manufacturing. The...

  4. Design and Manufacture of Energy Absorbing Materials

    ScienceCinema (OSTI)

    Duoss, Eric

    2014-05-30

    Learn about an ordered cellular material that has been designed and manufactured using direct ink writing (DIW), a 3-D printing technology being developed at LLNL. The new material is a patterned cellular material that can absorb mechanical energy-a cushion-while also providing protection against sheering. This material is expected to find utility in application spaces that currently use unordered foams, such as sporting and consumer goods as well as defense and aerospace.

  5. Design and Manufacture of Energy Absorbing Materials

    SciTech Connect (OSTI)

    Duoss, Eric

    2014-05-28

    Learn about an ordered cellular material that has been designed and manufactured using direct ink writing (DIW), a 3-D printing technology being developed at LLNL. The new material is a patterned cellular material that can absorb mechanical energy-a cushion-while also providing protection against sheering. This material is expected to find utility in application spaces that currently use unordered foams, such as sporting and consumer goods as well as defense and aerospace.

  6. Manufacturing Demonstration Facility

    Office of Environmental Management (EM)

    ORNL is managed by UT-Battelle for the US Department of Energy Manufacturing Demonstration Facility DOE Advanced Manufacturing Office Merit Review Craig Blue Director, Manufacturing Demonstration Facility Energy and Environmental Sciences Directorate May 6-7, 2014 Washington, DC This presentation does not include proprietary, confidential, or otherwise restricted information. Outline * Manufacturing Demonstration Facility * Impacts with Industry - Metal additive manufacturing - Polymer additive

  7. Fuel Cell Technologies Manufacturing Related Links | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Manufacturing » Fuel Cell Technologies Manufacturing Related Links Fuel Cell Technologies Manufacturing Related Links The following resources provide details about U.S. Department of Energy (DOE)-funded fuel cell technologies manufacturing activities, other EERE and federal manufacturing activities and initiatives, research plans and roadmaps, workshops, and additional related links. DOE-Funded Fuel Cell Technologies Manufacturing Activities Each year, hydrogen and fuel cell projects funded by

  8. Report to the President: Capturing a Domestic Competitive Advantage in Advanced Manufacturing

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    REPORT TO THE PRESIDENT CAPTURING A DOMESTIC COMPETITIVE ADVANTAGE IN ADVANCED MANUFACTURING Report of the Advanced Manufacturing Partnership Steering Committee Annex 2: Shared Infrastructure and Facilities Workstream Report Executive Office of the President President's Council of Advisors on Science and Technology JULY 2012 PREFACE In June 2011, the President established the Advanced Manufacturing Partnership (AMP), which is led by a Steering Committee that operates within the framework of the

  9. Report to the President: Capturing a Domestic Competitive Advantage in Advanced Manufacturing

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    REPORT TO THE PRESIDENT CAPTURING A DOMESTIC COMPETITIVE ADVANTAGE IN ADVANCED MANUFACTURING Report of the Advanced Manufacturing Partnership Steering Committee Annex 3: Education and Workforce Development Workstream Report Executive Office of the President President's Council of Advisors on Science and Technology JULY 2012 PREFACE In June 2011, the President established the Advanced Manufacturing Partnership (AMP), which is led by a Steering Committee that operates within the framework of the

  10. Energy-Saving Homes, Buildings, and Manufacturing Success Stories |

    Broader source: Energy.gov (indexed) [DOE]

    Department of Energy Energy-Saving Homes, Buildings, and Manufacturing Success Stories The Office of Energy Efficiency and Renewable Energy's (EERE) successes in converting tax dollars into more efficient energy solutions for our nation's buildings and manufacturing supply lines mean large-scale energy and cost savings. Learn how EERE's investments in energy solutions for homes, buildings, manufacturing, and the federal energy management sector translate into significant cost savings and a

  11. Video: Clean Energy Manufacturing Boosting U.S. Competitiveness |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Video: Clean Energy Manufacturing Boosting U.S. Competitiveness Video: Clean Energy Manufacturing Boosting U.S. Competitiveness September 14, 2015 - 3:40pm Addthis Watch the Energy 101 video above to learn how clean energy manufacturing is changing the kinds of products we make and how they are built. Eric Barendsen Energy Technology Program Specialist, Office of Energy Efficiency and Renewable Energy KEY FACTS The United States has an important opportunity to be the

  12. Manufacturing Energy and Carbon Footprint - Sector: All Manufacturing (NAICS 31-33), October 2012 (MECS 2006)

    Broader source: Energy.gov (indexed) [DOE]

    582 Nonprocess Losses 21,972 4,807 Steam Distribution Losses 937 647 Nonprocess Energy 11,789 Electricity Generation Steam Generation 21,972 855 Prepared for the Advanced Manufacturing Office (AMO) by Energetics Incorporated 1,647 11,327 2,850 Generation and Transmission Losses Generation and Transmission Losses 318 6,161 Onsite Generation 12,974 9,639 5,855 15,494 9,011 1,173 4,276 74.3 544.3 618.6 330.7 322.9 290.6 788.0 142.6 1,261 642.8 1,261.3 29.3 Fuel Total Energy Total Primary Energy

  13. Appalachian Advanced Energy Association | Open Energy Information

    Open Energy Info (EERE)

    search Name: Appalachian Advanced Energy Association Address: 4 E. Hunter St. Place: Logan, Ohio Zip: 43138 Sector: Efficiency, Renewable Energy, Services Phone Number:...

  14. Ohio Advanced Energy | Open Energy Information

    Open Energy Info (EERE)

    Energy Jump to: navigation, search Name: Ohio Advanced Energy Address: 100 S. Third Street Place: Columbus, Ohio Zip: 43201 Website: www.ohioadvancedenergy.orgnew References: Ohio...

  15. Solar Manufacturing Projects | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Solar Manufacturing Projects Solar Manufacturing Projects Solar Manufacturing Projects Solar Manufacturing Projects Solar Manufacturing Projects Solar Manufacturing Projects SOLAR MANUFACTURING 1 PROJECT in 1 LOCATION 1,000 MW GENERATION CAPACITY 1,927,000 MWh PROJECTED ANNUAL GENERATION * 1,100,000 METRIC TONS OF CO2 EMISSIONS PREVENTED ANNUALLY ALL FIGURES AS OF MARCH 2015 * Calculated using the project's and NREL Technology specific capacity factors. For cases in which NREL's capacity factors

  16. Number of Large Energy User Manufacturing Facilities by Sector and State (with Industrial Energy Consumption by State and Manufacturing Energy Consumption by Sector)

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Number of Large Energy User Manufacturing Facilities by Sector and State (with Industrial Energy Consumption by State and Manufacturing Energy Consumption by Sector) State Industrial Site Energy Consumption (TBtu) by State in 2010* Estimated Number of Large Energy User Manufacturing Facilities** by Sector (NAICS Code) and by State in 2005 Food Manufacturing & Beverage and Tobacco Product Manufacturing Wood Product Manufacturing & Paper Manufacturing Petroleum and Coal Products

  17. Clean Energy Manufacturing Initiative Solid-State Lighting | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Solid-State Lighting Clean Energy Manufacturing Initiative Solid-State Lighting Addthis Description Across the country, companies developing innovative clean energy technologies find competitive advantages to manufacturing in the United States. The Department of Energy's Building Technology Office SSL Manufacturing Roadmap is just one example of how we support manufacturing through convening industry perspectives on opportunities to significantly reduce risk, improve quality, increase

  18. Microwave (MW) and Radio Frequency (RF) as Enabling Technologies for Advanced Manufacturing

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Workshop: Microwave (MW) and Radio Frequency (RF) as Enabling Technologies for Advanced Manufacturing Workshop Date: July 25, 2012, 2:00 - 5:30 PM Venue: The 2 nd World Congress on Microwave Energy Applications July 23-27, 2012, Hilton Long Beach, Long Beach, CA http://www.mrs.org/2gcmea-2012/ PURPOSE The purpose of this workshop is to provide input that can help DOE strategically assess the potential for electrotechnologies such as microwave (MW) and radio frequency (RF) energy to impact

  19. Retooling and Manufacturing Program Guidance Using State Energy Program

    Energy Savers [EERE]

    Funds | Department of Energy Retooling and Manufacturing Program Guidance Using State Energy Program Funds Retooling and Manufacturing Program Guidance Using State Energy Program Funds U.S. Department of Energy (DOE) guidelines for states and U.S. territories sponsoring energy efficiency and renewable energy projects involving retooling and manufacturing that are funded by the 2009 Recovery Act and administered through the DOE State Energy Program (SEP). PDF icon

  20. Educated and Equipped: Energy & Manufacturing Training | Department of

    Office of Environmental Management (EM)

    Energy Energy & Manufacturing Training Educated and Equipped: Energy & Manufacturing Training May 8, 2014 - 1:01pm Addthis Workers install photovoltaic modules on top of a parking structure at National Renewable Energy Laboratory in Golden, Colorado. The Energy Department has several training resources for energy and manufacturing workers. | Photo by Dennis Schroeder, National Renewable Energy Laboratory Workers install photovoltaic modules on top of a parking structure at National

  1. Enhancing Transportation Energy Security through Advanced Combustion...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Transportation Energy Security through Advanced Combustion and Fuels Technologies Enhancing Transportation Energy Security through Advanced Combustion and Fuels Technologies 2005 ...

  2. Purdue, GE Collaborate On Advanced Manufacturing | GE Global...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    to GE transformational." Providing more detail on the partnership's focus on digitalization, decentralization and democratization in manufacturing, Abhijit Deshmukh, the...

  3. Processing and Manufacturing Equipment | Open Energy Information

    Open Energy Info (EERE)

    Processing and Manufacturing Equipment Jump to: navigation, search TODO: Add description List of Processing and Manufacturing Equipment Incentives Retrieved from "http:...

  4. Aurora Photovoltaics Manufacturing | Open Energy Information

    Open Energy Info (EERE)

    Photovoltaics Manufacturing Jump to: navigation, search Name: Aurora Photovoltaics Manufacturing Place: Lawrenceville, New Jersey Zip: 8648 Sector: Solar Product: A subsidiary of...

  5. American Wind Manufacturing | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    American Wind Manufacturing Addthis 1 of 9 Nordex USA -- a global manufacturer of wind turbines -- delivered and installed turbine components for the Power County Wind...

  6. Miraial formerly Kakizaki Manufacturing | Open Energy Information

    Open Energy Info (EERE)

    to: navigation, search Name: Miraial (formerly Kakizaki Manufacturing) Place: Tokyo, Japan Zip: 171-0021 Product: Manufacturer of wafer handling products and other components...

  7. Advanced Telemetry | Open Energy Information

    Open Energy Info (EERE)

    search Name: Advanced Telemetry Place: San Diego, California Zip: 92131-2435 Sector: Buildings Product: San Diego-based provider of energy management software, communication and...

  8. American Energy and Manufacturing Competitiveness Summit | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy American Energy and Manufacturing Competitiveness Summit American Energy and Manufacturing Competitiveness Summit Addthis AEMC Summit 1 of 12 AEMC Summit In partnership with the Council on Competitiveness, the Energy Department hosted the first American Energy and Manufacturing Competitiveness (AEMC) Summit in Washington, DC. A culmination of a series of dialogues held across the country over the past year, the summit focused on how we can increase U.S. competitiveness in clean energy

  9. Third Annual American Energy and Manufacturing Competitiveness Summit |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Third Annual American Energy and Manufacturing Competitiveness Summit Third Annual American Energy and Manufacturing Competitiveness Summit Addthis 1 of 5 Assistant Secretary for Energy Efficiency and Renewable Energy Dave Danielson addresses the American Energy and Manufacturing Competitiveness Summit held earlier this month at the Arena Stage in Washington, D.C. Image: Photo courtesy of Attlee Photography 2 of 5 Assistant Secretary Danielson discusses the innovative

  10. NREL: Energy Systems Integration Facility - Manufacturing and Material

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Diagnostics Manufacturing and Material Diagnostics Manufacturing and material diagnostics help manufacturers of clean energy technologies scale up production to volumes that meet U.S. Department of Energy and industry targets. The Energy Systems Integration Facility provides an array of instrumentation and diagnostic tools that allows highly skilled researchers to perform novel experimentation that would be cost- and time-prohibitive for most institutions. Currently, manufacturing activities

  11. Retooling and Manufacturing Program Guidance Using State Energy...

    Broader source: Energy.gov (indexed) [DOE]

    sponsoring energy efficiency and renewable energy projects involving retooling and manufacturing that are funded by the 2009 Recovery Act and administered through the DOE State...

  12. Manufacturing Energy and Carbon Footprint Definitions and Assumptions...

    Broader source: Energy.gov (indexed) [DOE]

    Definitions and Assumptions A number of key terms are used to interpret the manufacturing energy and carbon footprints. The terms associated with the energy footprint analysis are ...

  13. 2002 Manufacturing Energy Consumption Survey - User Needs Survey

    U.S. Energy Information Administration (EIA) Indexed Site

    2002 Manufacturing Energy Consumption Survey: User-Needs Survey View current results. We need your help in designing the next Energy Consumption Survey (MECS) As our valued...

  14. Celebrating Two Years of Building America's Clean Energy Manufacturing...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Two Years of Building America's Clean Energy Manufacturing Future Celebrating Two Years of ... work together to boost and improve production of clean energy technologies; Provides ...

  15. Clean Energy Manufacturing Initiative: Increasing American Competitiveness Through Innovation

    Broader source: Energy.gov [DOE]

    Find out how the Energy Department's Clean Energy Manufacturing Initiative is helping to boost American competitiveness, grow the economy and protect the environment.

  16. Consider Installing Turbulators on Two- and Three-Pass Firetube Boilers, Energy Tips: STEAM, Steam Tip Sheet #25 (Fact Sheet), Advanced Manufacturing Office (AMO), Energy Efficiency & Renewable Energy (EERE)

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    5 Consider Installing Turbulators on Two- and Three-Pass Firetube Boilers Firetube Boilers The packaged fretube boiler is the most common boiler design used to provide heating or process steam in industrial and heavy commercial applications. The American Boiler Manufacturers Association (ABMA) surveyed sales of high-pressure [15- to 350-pounds-per-square-inch-gauge (psig)] fretube and small watertube boilers between 1978 and 1994. ABMA found that fretube boilers comprised more than 85% of the

  17. Goodman Manufacturing: Order (2012-CE-1509) | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    2-CE-1509) Goodman Manufacturing: Order (2012-CE-1509) August 7, 2012 DOE ordered Goodman Manufacturing Company L.P. to pay an $8,000 civil penalty after finding Goodman Manufacturing had failed to certify that certain room air conditioners comply with the applicable energy conservation standard. The Order adopted a Compromise Agreement, which reflected settlement terms between DOE and Goodman Manufacturing. PDF icon Goodman Manufacturing: Order (2012-CE-1509) More Documents & Publications

  18. Fact Sheet: Advanced Natural Gas Systems Manufacturing R&D initiative

    Energy Savers [EERE]

    Fact Sheet: Advanced Natural Gas Systems Manufacturing R&D initiative 1 of 1 Summary: DOE will launch a collaborative effort with industry to evaluate and scope high- impact manufacturing R&D to improve natural gas system efficiency and reduce leaks with the goal of establishing an advanced manufacturing initiative. This will include a formal request for information, public workshops, and technical analysis and will leverage technology development areas already in progress through DOE's

  19. ZAP Advanced Battery Technologies JV | Open Energy Information

    Open Energy Info (EERE)

    battery manufacturer Advanced Battery Technologies focusing on manufacturing and marketing of advanced batteries for electric cars using the latest in nanotechnology....

  20. Stronger Manufacturers' Energy Efficiency Standards for Residential Air

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Conditioners Go Into Effect Today | Department of Energy Stronger Manufacturers' Energy Efficiency Standards for Residential Air Conditioners Go Into Effect Today Stronger Manufacturers' Energy Efficiency Standards for Residential Air Conditioners Go Into Effect Today January 23, 2006 - 11:09am Addthis WASHINGTON, DC -- To increase the energy efficiency of residential air conditioners, the U.S. Department of Energy (DOE) has issued new manufacturing standards that go into effect today,

  1. Energy Department Announces $2 Million to Support Manufacturing of Taller

    Office of Environmental Management (EM)

    Wind Turbine Towers | Department of Energy 2 Million to Support Manufacturing of Taller Wind Turbine Towers Energy Department Announces $2 Million to Support Manufacturing of Taller Wind Turbine Towers September 17, 2014 - 9:53am Addthis This Morning at the American Energy and Manufacturing Competitiveness Summit, Assistant Secretary for Energy Efficiency and Renewable Energy, Dr. David Danielson, announced $2 million through the Taller Hub Heights funding opportunity, for two organizations

  2. Pennsylvania Manufacturing Plants Recognized as Leaders in Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Management | Department of Energy Technical Assistance » Superior Energy Performance » Pennsylvania Manufacturing Plants Recognized as Leaders in Energy Management Pennsylvania Manufacturing Plants Recognized as Leaders in Energy Management April 9, 2015 - 2:33pm Addthis SEM Showcase Group_250 wide.jpg On April 7, 2015, the U.S. Department of Energy (DOE) recognized four Pennsylvania manufacturing plants owned by Curtiss-Wright, General Dynamics, Land O'Lakes, and Mack Trucks for their

  3. Federal Energy and Manufacturing Workforce Training Programs | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy Federal Energy and Manufacturing Workforce Training Programs Federal Energy and Manufacturing Workforce Training Programs Looking for opportunities in your area? Check out these federally funded programs supporting energy and manufacturing related workforce training programs. Funded by the National Science Foundation, the Department of Labor and the Department of Energy these programs provide workforce and training opportunities. Click on a grey circle on the map or filter by

  4. Upcoming Clean Energy Manufacturing Initiative (CEMI) Southeast Regional

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Summit on July 9 in Atlanta, GA | Department of Energy Upcoming Clean Energy Manufacturing Initiative (CEMI) Southeast Regional Summit on July 9 in Atlanta, GA Upcoming Clean Energy Manufacturing Initiative (CEMI) Southeast Regional Summit on July 9 in Atlanta, GA June 25, 2015 - 8:19am Addthis On July 9, the U.S. Department of Energy will be holding the Clean Energy Manufacturing Initiative (CEMI) Southeast Regional Summit at the Renaissance Atlanta Midtown Hotel in Atlanta, Georgia. The

  5. Clean Energy Manufacturing Resources - Technology Full-Scale Production |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Full-Scale Production Clean Energy Manufacturing Resources - Technology Full-Scale Production Clean Energy Manufacturing Resources - Technology Full-Scale Production Find resources to help you design a production and manufacturing process for a new clean energy technology or product. For full-scale production, other areas to consider include workforce development; R&D funding; and regional, state, and local resources. For more resources, see the Clean Energy

  6. Solar Manufacturing Technology | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Technology to Market » Solar Manufacturing Technology Solar Manufacturing Technology The SunShot Solar Manufacturing Technology (SolarMat) program funds the development of innovative manufacturing technologies that can achieve a significant market impact in one to four years. Launched in September 2013, the SolarMat program is supporting five projects working in two topic areas: photovoltaics (PV) and concentrating solar power (CSP). Both topics focus on driving down the cost of manufacturing

  7. Advanced Capacitor Technologies Inc | Open Energy Information

    Open Energy Info (EERE)

    Inc Jump to: navigation, search Name: Advanced Capacitor Technologies Inc Place: Tokyo, Japan Zip: 196-8558 Sector: Carbon Product: Japanese manufacturer of ultracapacitors from...

  8. MIT - Center for Advanced Nuclear Energy Systems | Open Energy...

    Open Energy Info (EERE)

    - Center for Advanced Nuclear Energy Systems Jump to: navigation, search Logo: MIT - Center for Advanced Nuclear Energy Systems Name: MIT - Center for Advanced Nuclear Energy...

  9. NREL: Energy Systems Integration - Advanced Energy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Advanced Energy Photo of a large gray inverter connected to numerous power cords. 500-kilowatt Advanced Energy inverter at the ESIF PSIL. Photo by Dennis Schroeder, NREL As the first industry partner to use the ESIF, Advanced Energy Industries is using the ESIF's Power Systems Integration Laboratory (PSIL) to test its new solar photovoltaic (PV) inverter technology with the facility's hardware-in-the-loop system and megawatt-scale grid simulators. Solar inverters are responsible for a number of

  10. Advanced Manufacturing Office FY 2016 Budget At-A-Glance

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Office uses an integrated approach that relies on three ... Generation Manufacturing Research and Development (R&D) ... and replicable quantitative analysis and ...

  11. Manufacturing of Protected Lithium Electrodes for Advanced Lithium...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    the largest manufacturer of rechargeable lead-acid batteries in the world and recognized as ... entirely petroleum-based > 20B battery industry PLE-based batteries provide ...

  12. Manufacturing Innovation and Scale-up | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Technology to Market » Manufacturing Innovation and Scale-up Manufacturing Innovation and Scale-up The SunShot Initiative funds cutting-edge research and development that will help the solar industry to reach specific manufacturing-related cost goals and supports cost-cutting advances in the solar supply chain, across system components, and in manufacturing processes. SunShot works to de-risk both near and long-term innovations in the private sector as well as manufacturing-oriented consortia.

  13. Energy Department to Work with National Association of Manufacturers to

    Energy Savers [EERE]

    Increase Industrial Energy Efficiency | Department of Energy Department to Work with National Association of Manufacturers to Increase Industrial Energy Efficiency Energy Department to Work with National Association of Manufacturers to Increase Industrial Energy Efficiency June 12, 2007 - 1:40pm Addthis WASHINGTON, DC - U.S. Department of Energy (DOE) Secretary Samuel W. Bodman today expanded DOE's work to maximize energy efficiency by increasing cooperation among U.S. industry and energy

  14. Energy Department Announces New Investments in Innovative Manufacturing

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Technologies | Department of Energy Innovative Manufacturing Technologies Energy Department Announces New Investments in Innovative Manufacturing Technologies June 12, 2012 - 9:00am Addthis News Media Contact (202) 586-4940 WASHINGTON - As part of the Obama Administration's blueprint for an American economy built to last, the Energy Department today announced new investments that support American leadership and global competiveness in manufacturing. The Energy Department awarded more than

  15. DOE and Federal Energy and Manufacturing Workforce Programs and

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Infrastructure Location List | Department of Energy DOE and Federal Energy and Manufacturing Workforce Programs and Infrastructure Location List DOE and Federal Energy and Manufacturing Workforce Programs and Infrastructure Location List View a list of DOE and federal workforce programs and infrastructure, cataloged by city and state. This list contains most of the programs included in our Energy & Manufacturing Topics list and Trade Adjustment Assistance Community College and Career

  16. 20% Wind Energy by 2030 - Chapter 3: Manufacturing, Materials, and

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Resources Summary Slides | Department of Energy 3: Manufacturing, Materials, and Resources Summary Slides 20% Wind Energy by 2030 - Chapter 3: Manufacturing, Materials, and Resources Summary Slides Summary Slides for Chapter 3: Manufacturing, Material Resources, and Impacts on the Nation's Economy PDF icon 20percent_summary_chap3.pdf More Documents & Publications 20% Wind Energy by 2030 - Chapter 2: Wind Turbine Technology Summary Slides 20% Wind Energy by 2030 - Chapter 1: Executive

  17. Clean Energy Manufacturing Boosting U.S. Competitiveness

    SciTech Connect (OSTI)

    2015-09-14

    Clean energy manufacturing is booming in the United States. U.S. clean energy investment topped $51 billion in 2014 alone, and even more growth is expected in the $250 billion clean energy market worldwide in coming years. America has an important opportunity to continue growing clean energy manufacturing industries, along with the high quality jobs and stronger local economies that come with them.

  18. Secretary Moniz Speaks at the American Energy and Manufacturing

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Competitiveness (AEMC) Summit | Department of Energy Secretary Moniz Speaks at the American Energy and Manufacturing Competitiveness (AEMC) Summit Secretary Moniz Speaks at the American Energy and Manufacturing Competitiveness (AEMC) Summit Addthis Speakers Secretary Ernest Moniz Duration 20:52 Topic Energy Sector Jobs Building Design Innovation Tax Credits, Rebates, Savings

  19. Advancing Clean Energy Technology (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2010-07-01

    DOE/EERE Solar Energy Technologies Program Fact Sheet - Advancing Clean Energy Technology, May 2010.

  20. National Manufacturing Day | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    anticipated 400,000 people who want to experience U.S. manufacturing up close and in person. On October 2, the U.S. Department of Commerce's fourth annual Manufacturing Day will...

  1. Advancing Women in Clean Energy

    Broader source: Energy.gov [DOE]

    As part of the Clean Energy Ministerial, C3E and its ambassadors have made it their mission to advance the leadership of women in clean energy around the world. In this series, we will leverage the experience and wisdom of some of the amazing C3E ambassadors who will share advice or suggestions that may be helpful for women seeking to advance their careers in clean energy.

  2. Lightweighting Automotive Materials for Increased Fuel Efficiency and Delivering Advanced Modeling and Simulation Capabilities to U.S. Manufacturers

    SciTech Connect (OSTI)

    Hale, Steve

    2013-09-11

    Abstract The National Center for Manufacturing Sciences (NCMS) worked with the U.S. Department of Energy (DOE), National Energy Technology Laboratory (NETL), to bring together research and development (R&D) collaborations to develop and accelerate the knowledgebase and infrastructure for lightweighting materials and manufacturing processes for their use in structural and applications in the automotive sector. The purpose/importance of this DOE program: 2016 CAF standards. Automotive industry technology that shall adopt the insertion of lightweighting material concepts towards manufacturing of production vehicles. Development and manufacture of advanced research tools for modeling and simulation (M&S) applications to reduce manufacturing and material costs. U.S. competitiveness that will help drive the development and manufacture of the next generation of materials. NCMS established a focused portfolio of applied R&D projects utilizing lightweighting materials for manufacture into automotive structures and components. Areas that were targeted in this program: Functionality of new lightweighting materials to meet present safety requirements. Manufacturability using new lightweighting materials. Cost reduction for the development and use of new lightweighting materials. The automotive industrys future continuously evolves through innovation, and lightweight materials are key in achieving a new era of lighter, more efficient vehicles. Lightweight materials are among the technical advances needed to achieve fuel/energy efficiency and reduce carbon dioxide (CO2) emissions: Establish design criteria methodology to identify the best materials for lightweighting. Employ state-of-the-art design tools for optimum material development for their specific applications. Match new manufacturing technology to production volume. Address new process variability with new production-ready processes.

  3. Clean Energy Manufacturing Innovation Institute for Composite...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    and Fuel Cell Technologies Research, Development, and Demonstrations Funding Opportunity Announcement Webinar Slides Fiber Reinforced Polymer Composite Manufacturing Workshop

  4. Tennessee-based IAC Helps Manufacturer Become More Energy Efficient |

    Energy Savers [EERE]

    Department of Energy Tennessee-based IAC Helps Manufacturer Become More Energy Efficient Tennessee-based IAC Helps Manufacturer Become More Energy Efficient November 14, 2011 - 12:22pm Addthis April Saylor April Saylor Former Digital Outreach Strategist, Office of Public Affairs What does this mean for me? With 50+ assessments and 500+ total recommendations made, this IAC's recommendations could save the average manufacturer evaluated an average $118,636 in electrical, natural gas, waste and

  5. Use Steam Jet Ejectors or Thermocompressors to Reduce Venting of Low-Pressure Steam, Energy Tips: STEAM, Steam Tip Sheet #29 (Fact Sheet), Advanced Manufacturing Office (AMO), Energy Efficiency & Renewable Energy (EERE)

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    9 Use Steam Jet Ejectors or Thermocompressors to Reduce Venting of Low-Pressure Steam Large industrial plants often vent signifcant quantities of low-pressure steam to the atmosphere, wasting energy, water, and water-treatment chemicals. Recovery of the latent heat content of low-pressure steam reduces the boiler load, resulting in energy and fuel cost savings. Low-pressure steam's potential uses include driving evaporation and distillation processes, producing hot water, space heating,

  6. Exploring the Wind Manufacturing Map | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Exploring the Wind Manufacturing Map Exploring the Wind Manufacturing Map August 15, 2012 - 5:01pm Addthis America's wind energy industry supports a growing domestic industrial base. Check out this map to find manufacturing facilities in your state. Matthew Loveless Matthew Loveless Data Integration Specialist, Office of Public Affairs What are the key facts? The domestic wind manufacturing industry has grown dramatically in the last 5 years, and now nearly 70 percent of the turbines installed

  7. Advanced Critical Advanced Energy Retrofit Education and Training and

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Credentialing - 2014 BTO Peer Review | Department of Energy Critical Advanced Energy Retrofit Education and Training and Credentialing - 2014 BTO Peer Review Advanced Critical Advanced Energy Retrofit Education and Training and Credentialing - 2014 BTO Peer Review Presenter: David Riley, Penn State Targeting professionals, employers, and education program leaders in selected advanced energy retrofit (AER) project fields (including energy auditors, building operators, energy managers, and

  8. Treasury, Energy Announce More Than $2 Billion in Recovery Act Tax Credits for Energy Manufacturers

    Broader source: Energy.gov [DOE]

    Tax Credit Program Will Increase Economic Development, Promote Manufacturing of Clean Energy Equipment

  9. Southface Energy Institute: Advanced Commercial Buildings Initiative...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Southface Energy Institute: Advanced Commercial Buildings Initiative Southface Energy Institute: ... More Documents & Publications Georgia and Arkansas Residential Energy Code ...

  10. Innovative Manufacturing Initiative Project Selections

    Broader source: Energy.gov [DOE]

    The Department announced nearly $23 million for 12 projects across the country to advance technologies aimed at helping American manufacturers dramatically increase the energy efficiency of their manufacturing facilities, lower costs, and develop new manufacturing technologies.

  11. Advanced RenewableEnergy Company ARC Energy | Open Energy Information

    Open Energy Info (EERE)

    (ARC Energy) Place: Nashua, New Hampshire Product: New Hampshire-based stealth mode LED substrate manufacture equipment provider which aims to lower the cost of LEDs....

  12. Join Us for the Clean Energy Manufacturing Initiative's Western...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... clean energy innovators to scale up innovations to manufacturing processes Foster ... The Summit is free of charge and open to the public. Register for the CEMI Western ...

  13. Manufacturing Energy and Carbon Footprint - Sector: Iron and...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    - Sector: Iron and Steel (NAICS 3311, 3312), October 2012 (MECS 2006) Manufacturing Energy and Carbon Footprint - Sector: Iron and Steel (NAICS 3311, 3312), October 2012 (MECS ...

  14. Public-Private Partnerships for Clean Energy Manufacturing Fact...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Partnerships for Clean Energy Manufacturing More Documents & Publications Introduction to CEMI Fact Sheet Process Intensification Workshop - September 29-30, 2015...

  15. Manufacturing-Industrial Energy Consumption Survey(MECS) Historical...

    U.S. Energy Information Administration (EIA) Indexed Site

    reports, data tables and questionnaires Released: May 2008 The Manufacturing Energy Consumption Survey (MECS) is a periodic national sample survey devoted to measuring...

  16. Energy Use Loss and Opportunities Analysis: U.S. Manufacturing...

    Broader source: Energy.gov (indexed) [DOE]

    energyuselossopportunitiesanalysis.pdf More Documents & Publications U.S. Manufacturing Energy Use and Greenhouse Gas Emissions Analysis Bandwidth Study U.S. Chemical...

  17. ADVANCED RESEARCH PROJECTS AGENCY - ENERGY ...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    5 - 2013 2014 2015 2016 ADVANCED RESEARCH PROJECTS AGENCY - ENERGY Jan Feb Mar Apr May Jun July Aug Sep Oct Nov Dec Jan Feb Mar Apr May Jun July Aug Sep Oct Nov Dec Jan Feb Mar Apr...

  18. Pika Energy Develops Innovative Manufacturing Process and Lowers Production

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Cost Under DOE Competitiveness Improvement Project | Department of Energy Pika Energy Develops Innovative Manufacturing Process and Lowers Production Cost Under DOE Competitiveness Improvement Project Pika Energy Develops Innovative Manufacturing Process and Lowers Production Cost Under DOE Competitiveness Improvement Project September 16, 2015 - 6:24pm Addthis The U.S. Department of Energy's (DOE's) National Renewable Energy Laboratory (NREL) recently awarded Pika Energy of Westbrook,

  19. Advanced Wind Energy Systems AWES | Open Energy Information

    Open Energy Info (EERE)

    Wind Energy Systems AWES Jump to: navigation, search Name: Advanced Wind Energy Systems (AWES) Place: Toms River, New Jersey Sector: Wind energy Product: Advanced Wind Energy...

  20. Advanced Research Projects Agency - Energy | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    recovery act Advanced Research Projects Agency - Energy More Documents & Publications Advanced Research Projects Agency -EnergyDepartment A presentation by the Advanced Research...

  1. Energy-Saving Homes, Buildings, & Manufacturing (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2012-09-01

    This document highlights DOE's Office of Energy Efficiency and Renewable Energy's advancements in saving energy in homes, buildings, and industrial plants.

  2. DOE Announces Webinars on Analysis in Clean Energy Manufacturing...

    Office of Environmental Management (EM)

    the latest energy efficiency and renewable energy technologies, to training for the clean energy workforce. Webinars are free; however, advanced registration is typically required. ...

  3. Manufactured Home Energy Audit user`s manual

    SciTech Connect (OSTI)

    1997-09-01

    The Manufactured Home Energy Audit (MHEA) is a software tool that predicts manufactured home energy consumption and recommends weatherization retrofit measures. It was developed to assist local weatherization agencies working with the US Department of Energy (DOE) Weatherization Assistance Program. Whether new or experienced, employed within or outside the Weatherization Assistance Program, all users can benefit from incorporating MHEA into their manufactured home weatherization programs. DOE anticipates that the state weatherization assistance programs that incorporate MHEA into their programs will find significant growth in the energy and cost savings achieved from manufactured home weatherization. The easy-to-use MHEA displays a colorful, graphical interface for entering simple inputs and provides understandable, usable results. The user enters information about the manufactured home construction, heating equipment, cooling equipment, and weather site. MHEA then calculates annual energy consumption using a simplified building energy analysis technique. MHEA stands apart from other building energy analysis tools in many ways. Calculations incorporated into the computer code specifically address manufactured home heating and cooling load trends. The retrofit measures evaluated by MHEA are all applicable to manufactured homes. Help messages describe common manufactured home weatherization practices as well as provide hints on how to install retrofit measures. These and other features help make MHEA easy to use when evaluating energy consumption and the effects of weatherization retrofit measures for manufactured homes.

  4. LightManufacturing | Open Energy Information

    Open Energy Info (EERE)

    greenhouse gas emissions resulting from rotational molding. 6 Unlike concentrated solar power firms which focus on utility-scale electric production 7 , LightManufacturing...

  5. Clean Energy Manufacturing Initiative: Technology Research and...

    Energy Savers [EERE]

    manufacturers take advantage of this lower-priced fuel by modernizing the nations natural gas transmission and distribution systems and improving natural gas system efficiency....

  6. Advanced Energy Design Guides

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    way to infuence above-code exemplary energy performance in commercial buildings is to provide architects, engineers, and other design practitioners prescriptive guidance that indicates, measure by measure, how to do it. To this end, the U.S. Department of Energy (DOE) actively supports development of a series of AEDGs- publications designed to provide recommendations for achieving 30 to 50 percent energy savings over the minimum code requirements of ANSI/ASHRAE/ IESNA Standard 90.1-1999. AEDGs

  7. Use Low-Grade Waste Steam to Power Absorption Chillers, Energy Tips: STEAM, Steam Tip Sheet #14 (Fact Sheet), Advanced Manufacturing Office (AMO), Energy Efficiency & Renewable Energy (EERE)

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    4 Use Low-Grade Waste Steam to Power Absorption Chillers Absorption chillers use heat, instead of mechanical energy, to provide cooling. The mechanical vapor compressor is replaced by a thermal compressor (see fgure) that consists of an absorber, a generator, a pump, and a throttling device. The refrigerant vapor from the evaporator is absorbed by a solution mixture in the absorber. This solution is then pumped to the generator where the refrigerant is revaporized using a waste steam heat

  8. Department of Energy to Invest $50 Million to Advance Domestic Solar

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Manufacturing Market, Achieve SunShot Goal | Department of Energy Invest $50 Million to Advance Domestic Solar Manufacturing Market, Achieve SunShot Goal Department of Energy to Invest $50 Million to Advance Domestic Solar Manufacturing Market, Achieve SunShot Goal August 2, 2011 - 3:53pm Addthis August 2, 2011 Department of Energy to Invest $50 Million to Advance Domestic Solar Manufacturing Market, Achieve SunShot GoalSUNPATH Program Will Boost American Competitiveness, Lower Cost of Solar

  9. Strengthening U.S. Leadership in Advanced Manufacturing | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    a corporate research and development contract, the National Labs work as the research arm for desalination advancement while CAP develops the technologies. When asked about the...

  10. Tribal Renewable Energy Advanced Course: Project Development...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Development and Financing Essentials Tribal Renewable Energy Advanced Course: Project Development and Financing Essentials Watch the DOE Office of Indian Energy advanced course ...

  11. Advances in understanding solar energy collection materials

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Understanding solar energy collection materials Advances in understanding solar energy collection materials A LANL team and collaborators have made advances in the understanding of...

  12. DOE Reaches Settlement with Freezer Manufacturer | Department of Energy

    Energy Savers [EERE]

    Settlement with Freezer Manufacturer DOE Reaches Settlement with Freezer Manufacturer May 29, 2015 - 9:20am Addthis The General Counsel's enforcement office settled an enforcement action against Perlick Corporation for $168,200. Perlick agreed to the settlement after manufacturing and distributing 841 units of freezer model HP24F. DOE found that the model consumed over 20% more energy than permitted under the applicable energy conservation standard. Documents related to the distribution of

  13. Slideshow: Innovation in the Manufacturing Sector | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Slideshow: Innovation in the Manufacturing Sector Slideshow: Innovation in the Manufacturing Sector December 12, 2013 - 5:00pm Addthis AEMC Summit 1 of 12 AEMC Summit In partnership with the Council on Competitiveness, the Energy Department hosted the first American Energy and Manufacturing Competitiveness (AEMC) Summit in Washington, DC. A culmination of a series of dialogues held across the country over the past year, the summit focused on how we can increase U.S. competitiveness in clean

  14. Recovery Act Incentives for Wind Energy Equipment Manufacturing |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Recovery Act Incentives for Wind Energy Equipment Manufacturing Recovery Act Incentives for Wind Energy Equipment Manufacturing Document that lists some of the major federal incentives for wind power deployment. PDF icon federal_incentives_wind_deployment.pdf More Documents & Publications Qualified Energy Conservation Bonds (QECBs) & New Clean Renewable Energy Bonds (New CREBs) Solar Photovoltaic Financing: Deployment on Public Property by State and Local

  15. Institute for Advanced Composites Manufacturing Innovation-Inaugural

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Members Meeting Innovation-Inaugural Members Meeting - Sandia Energy Energy Search Icon Sandia Home Locations Contact Us Employee Locator Energy & Climate Secure & Sustainable Energy Future Stationary Power Energy Conversion Efficiency Solar Energy Wind Energy Water Power Supercritical CO2 Geothermal Natural Gas Safety, Security & Resilience of the Energy Infrastructure Energy Storage Nuclear Power & Engineering Grid Modernization Battery Testing Nuclear Fuel Cycle Defense

  16. Advanced Manufacturing pipeline brings NSC and Minority Serving

    National Nuclear Security Administration (NNSA)

    Institutions together | National Nuclear Security Administration Manufacturing pipeline brings NSC and Minority Serving Institutions together | National Nuclear Security Administration Facebook Twitter Youtube Flickr RSS People Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our Infrastructure Countering Nuclear Terrorism About Our Programs Our History Who We Are Our Leadership Our Locations Budget Our Operations Library

  17. Appalachian Advanced Energy | Open Energy Information

    Open Energy Info (EERE)

    4 E Hunter Street Place: Logan, Ohio Zip: 43138 Website: www.ohioaaea.orgAAEAHome.html References: Appalachian Advanced Energy1 This article is a stub. You can help OpenEI...

  18. Manufacturing technologies

    SciTech Connect (OSTI)

    1995-09-01

    The Manufacturing Technologies Center is an integral part of Sandia National Laboratories, a multiprogram engineering and science laboratory, operated for the Department of Energy (DOE) with major facilities at Albuquerque, New Mexico, and Livermore, California. Our Center is at the core of Sandia`s Advanced Manufacturing effort which spans the entire product realization process.

  19. DYNAMIC MANUFACTURING ENERGY FLOWS TOOL (2010, UNITS: TRILLION...

    Broader source: Energy.gov (indexed) [DOE]

    this diagram to explore (zoom, pan, select) and compare energy flows across U.S. manufacturing and key subsectors. Line widths indicate the volume of energy flow in trillions of...

  20. Advanced Materials in Support of EERE Needs to Advance Clean Energy Technologies Program Implementation

    SciTech Connect (OSTI)

    Liby, Alan L; Rogers, Hiram

    2013-10-01

    The goal of this activity was to carry out program implementation and technical projects in support of the ARRA-funded Advanced Materials in Support of EERE Needs to Advance Clean Energy Technologies Program of the DOE Advanced Manufacturing Office (AMO) (formerly the Industrial Technologies Program (ITP)). The work was organized into eight projects in four materials areas: strategic materials, structural materials, energy storage and production materials, and advanced/field/transient processing. Strategic materials included work on titanium, magnesium and carbon fiber. Structural materials included work on alumina forming austentic (AFA) and CF8C-Plus steels. The advanced batteries and production materials projects included work on advanced batteries and photovoltaic devices. Advanced/field/transient processing included work on magnetic field processing. Details of the work in the eight projects are available in the project final reports which have been previously submitted.