Sample records for advance notice application

  1. EIS-0396: Advance Notice of Intent o Prepare an Environmental...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    EIS-0396: Advance Notice of Intent o Prepare an Environmental Impact Statement Global Nuclear Energy Partnership Technology Demonstration Program Advance Notice of Intent To...

  2. EIS-0394: Advance Notice of Intent to Prepare an Environmental...

    Energy Savers [EERE]

    Advance Notice of Intent to Prepare an Environmental Impact Statement EIS-0394: Advance Notice of Intent to Prepare an Environmental Impact Statement Implementation of the...

  3. REVISED NOTICE OF PROPOSED AWARDS Advanced Natural Gas Engine Research and Development for Class 3

    E-Print Network [OSTI]

    REVISED NOTICE OF PROPOSED AWARDS Advanced Natural Gas Engine Research and Development for Class 3 Notice (PON-12-504) entitled "Advanced Natural Gas Engine research and Development for Class 3 through of natural gas engine concepts for application in light heavy-duty vehicles (LHDV) and medium heavy duty

  4. Privacy notice Applicability

    E-Print Network [OSTI]

    Zhou, Yaoqi

    to other university web sites should review the privacy notices for the particular sites they visit. IUPUI Health Services is not responsible for the content of other web sites or for the privacy practices of web notice. Collection and Use Passive/Automatic Collection When you view pages on our site, the web server

  5. EIS-0402: Advance Notice of Intent to Prepare an Environmental...

    Office of Environmental Management (EM)

    Advance Notice of Intent to Prepare an Environmental Impact Statement Remediation of Area IV of the Santa Susana Field Laboratory The U.S. Department of Energy (DOE) is...

  6. Washington Notice of Construction Application under New Source...

    Open Energy Info (EERE)

    Washington Notice of Construction Application under New Source Review (Form ECY 070-410) Jump to: navigation, search OpenEI Reference LibraryAdd to library Form: Washington Notice...

  7. 2012 Advanced Applications Research & Development Peer Review...

    Broader source: Energy.gov (indexed) [DOE]

    2012 Advanced Applications R&D Peer Review - Mode Meter Development - Ning Zhou, PNNL 2012 Advanced Applications R&D Peer Review - Oscillation Monitoring System - Mani...

  8. Advanced Boost System Development for Diesel HCCI/LTC Application...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    More Documents & Publications Advanced Boost System Development for Diesel HCCILTC Application Advanced Boost System Development for Diesel HCCILTC Application...

  9. Application for SAS Certificate Advanced Statistics

    E-Print Network [OSTI]

    Dahl, David B.

    Application for SAS Certificate Advanced Statistics ___________________________________________________________________________________ Student Signature _________________________________________ Date I am a Statistics Major at Brigham Young of Statistics to access my academic information. Brigham Young University Department of Statistics offers

  10. 2012 Advanced Applications Research & Development Peer Review...

    Broader source: Energy.gov (indexed) [DOE]

    Peer Review - Real-Time Wide-Area Montoring Tool Based on CELL Method - Yuri Makarov, PNNL 2012 Advanced Applications R&D Peer Review - Modal Analysis for Grid Operations (MANGO)...

  11. A. Bringing Plants Into BTI The Greenhouse Manager must be given reasonable, advance notice before

    E-Print Network [OSTI]

    Pawlowski, Wojtek

    10 8.0 PLANTS A. Bringing Plants Into BTI The Greenhouse Manager must be given reasonable, advance notice before plants are brought into the growth facility. Incoming plants will be inspected for pests and diseases. Pest control measures or quarantine may be required before moving plants into the assigned

  12. Nanoscale Advances in Catalysis and Energy Applications

    SciTech Connect (OSTI)

    Li, Yimin; Somorjai, Gabor A.

    2010-05-12T23:59:59.000Z

    In this perspective, we present an overview of nanoscience applications in catalysis, energy conversion, and energy conservation technologies. We discuss how novel physical and chemical properties of nanomaterials can be applied and engineered to meet the advanced material requirements in the new generation of chemical and energy conversion devices. We highlight some of the latest advances in these nanotechnologies and provide an outlook at the major challenges for further developments.

  13. Advanced Boost System Development for Diesel HCCI/LTC Application...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Boost System Development for Diesel HCCILTC Application Advanced Boost System Development for Diesel HCCILTC Application Optimization of a turbocharger for high EGR applications...

  14. advanced electronic applications: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

  15. advanced applications singapore: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

  16. advanced application examples: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

  17. advanced accelerator applications: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

  18. advanced manufacturing applications: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

  19. advanced vehicle applications: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

  20. advanced technology applications: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

  1. advanced applications kyoto: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

  2. COMBUSTION SYNTHESIS OF ADVANCED MATERIALS: PRINCIPLESAND APPLICATIONS

    E-Print Network [OSTI]

    Mukasyan, Alexander

    COMBUSTION SYNTHESIS OF ADVANCED MATERIALS: PRINCIPLESAND APPLICATIONS Arvind Varma, Alexander S. Gasless Combustion SynthesisFrom Elements B. Combustion Synthesis in Gas-Solid Systems C. Products of Thermite-vpe SHS D. Commercial Aspects IV. Theoretical Considerations A. Combustion Wave Propagation Theory

  3. ECE 6050 ADVANCED MICROPROCESSOR APPLICATIONS SPRING 2012

    E-Print Network [OSTI]

    Grantner, Janos L.

    ECE 6050 ADVANCED MICROPROCESSOR APPLICATIONS SPRING 2012 Instructor: Dr. Janos Grantner Office The objective of this course is to survey current microprocessors and to discuss various aspects of memory and in microprocessor/microcontroller systems design. Though some software topics will also be covered, the primary

  4. Signature molecular descriptor : advanced applications.

    SciTech Connect (OSTI)

    Visco, Donald Patrick, Jr. (Tennessee Technological University, Cookeville, TN)

    2010-04-01T23:59:59.000Z

    In this work we report on the development of the Signature Molecular Descriptor (or Signature) for use in the solution of inverse design problems as well as in highthroughput screening applications. The ultimate goal of using Signature is to identify novel and non-intuitive chemical structures with optimal predicted properties for a given application. We demonstrate this in three studies: green solvent design, glucocorticoid receptor ligand design and the design of inhibitors for Factor XIa. In many areas of engineering, compounds are designed and/or modified in incremental ways which rely upon heuristics or institutional knowledge. Often multiple experiments are performed and the optimal compound is identified in this brute-force fashion. Perhaps a traditional chemical scaffold is identified and movement of a substituent group around a ring constitutes the whole of the design process. Also notably, a chemical being evaluated in one area might demonstrate properties very attractive in another area and serendipity was the mechanism for solution. In contrast to such approaches, computer-aided molecular design (CAMD) looks to encompass both experimental and heuristic-based knowledge into a strategy that will design a molecule on a computer to meet a given target. Depending on the algorithm employed, the molecule which is designed might be quite novel (re: no CAS registration number) and/or non-intuitive relative to what is known about the problem at hand. While CAMD is a fairly recent strategy (dating to the early 1980s), it contains a variety of bottlenecks and limitations which have prevented the technique from garnering more attention in the academic, governmental and industrial institutions. A main reason for this is how the molecules are described in the computer. This step can control how models are developed for the properties of interest on a given problem as well as how to go from an output of the algorithm to an actual chemical structure. This report provides details on a technique to describe molecules on a computer, called Signature, as well as the computer-aided molecule design algorithm built around Signature. Two applications are provided of the CAMD algorithm with Signature. The first describes the design of green solvents based on data in the GlaxoSmithKline (GSK) Solvent Selection Guide. The second provides novel non-steroidal glucocorticoid receptor ligands with some optimally predicted properties. In addition to using the CAMD algorithm with Signature, it is demonstrated how to employ Signature in a high-throughput screening study. Here, after classifying both active and inactive inhibitors for the protein Factor XIa using Signature, the model developed is used to screen a large, publicly-available database called PubChem for the most active compounds.

  5. Advanced boost system development for diesel HCCI/LTC applications...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    boost system development for diesel HCCILTC applications Advanced boost system development for diesel HCCILTC applications 2009 DOE Hydrogen Program and Vehicle Technologies...

  6. Advanced boost system development for diesel HCCI/LTC applications...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    boost system development for diesel HCCILTC applications Advanced boost system development for diesel HCCILTC applications Presentation from the U.S. DOE Office of Vehicle...

  7. Notices

    U.S. Energy Information Administration (EIA) Indexed Site

    24, 2013 Notices Module Shipments Report,'' move into this clearance package to permit EIA to better align its surveys and programs. In addition, EIA's proposed new Form...

  8. Notices

    Energy Savers [EERE]

    Impact Statement AGENCY: U.S. Department of Energy. ACTION: Notice of availability and public hearings. SUMMARY: The U.S. Department of Energy (DOE) announces the availability...

  9. Notices

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Western Area Power Administration, DOE. ACTION: Notice of Extension of Non-Firm Power Formula Rate. SUMMARY: The Western Area Power Administration (Western) extends, on an interim...

  10. Application to Export Electric Energy OE Docket No. EA-318-B AEP Energy Partners Inc: Federal Register Notice, Volume 77, No. 6- Jan. 10, 2012

    Broader source: Energy.gov [DOE]

    Application from AEP Energy Partners Inc. to export electric energy to Mexico. Federal Register Notice.

  11. Acoustic Waveform Logging - Advances In Theory And Application

    E-Print Network [OSTI]

    Cheng, C. H.

    Full-waveform acoustic logging has made significant advances in both theory and application in recent years, and these advances have greatly increased the capability of log analysts to measure the physical properties of ...

  12. 31320-2014-EN Member states -Service contract -Prior Information Notice -Not applicable 1/2

    E-Print Network [OSTI]

    Crowther, Paul

    OJ/S S20 29/01/2014 31320-2014-EN Member states - Service contract - Prior Information Notice - Not applicable 1/2 29/01/2014 S20 http://ted.europa.eu/TED Member states - Service contract - Prior Information/S S20 29/01/2014 31320-2014-EN Member states - Service contract - Prior Information Notice

  13. Notices

    Broader source: Energy.gov (indexed) [DOE]

    Notices 1 75 FR 66078 (October 10, 2010). 2 The Final EIS can be found on Western's Web site at: http:ww2.wapa.govsitesWestern transmissioninterconnDocumentsricesolar...

  14. Notices

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Friday, February 22, 2013 Notices 1 73 FR 42,565 (July 22, 2008). 2 See U.S. Dept. of Energy, Western Area Power Admin., Docket No. EF08-5161-000, 127 FERC 62,043 (2009)....

  15. Notices

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    517 Federal Register Vol. 77, No. 38 Monday, February 27, 2012 Notices Issued at Washington, DC, on February 21, 2012. LaTanya R. Butler, Acting Deputy Committee Management...

  16. Notices

    Energy Savers [EERE]

    511 Federal Register Vol. 79, No. 124 Friday, June 27, 2014 Notices interventions in lieu of paper using the ''eFiling'' link at http:www.ferc.gov. Persons unable to file...

  17. Notices

    U.S. Energy Information Administration (EIA) Indexed Site

    362 Federal Register Vol. 77, No. 51 Thursday, March 15, 2012 Notices telephone (TTY), call the Federal Relay Service (FRS), toll free, at 1-800-877- 8339. Individuals with...

  18. Notices

    Energy Savers [EERE]

    000 Federal Register Vol. 80, No. 58 Thursday, March 26, 2015 Notices 1 American LNG states that the Hialeah Facility is being constructed, and will be owned and operated, by...

  19. Notices

    Broader source: Energy.gov (indexed) [DOE]

    Register Vol. 79, No. 156 Wednesday, August 13, 2014 Notices 1 See Freeport LNG Expansion, L.P., et al., DOE FE Order Nos. 3282-B, 3357-A, Docket Nos. 10- 161-LNG,...

  20. Notices

    Broader source: Energy.gov (indexed) [DOE]

    Federal Register Vol. 79, No. 180 Wednesday, September 17, 2014 Notices 1 Alaska LNG states that the conversion factor of 46.467 Bcf per million metric ton is appropriate...

  1. Notices

    National Nuclear Security Administration (NNSA)

    9 Federal Register Vol. 76, No. 2 Tuesday, January 4, 2011 Notices quarter of the Northeast quarter of said Section 8; thence South 191.0 feet; thence East 228.0 feet; thence...

  2. Notices

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    FR Doc. 2013-31220 Filed 12-27-13; 8:45 am BILLING CODE 6450-01-P FEDERAL COMMUNICATIONS COMMISSION Notice of Public Information Collection(s) Being Reviewed by the...

  3. Advanced Mechanical Heat Pump Technologies for Industrial Applications

    E-Print Network [OSTI]

    Mills, J. I.; Chappell, R. N.

    , advanced chemical and mechanical heat pump technologies are being developed for industrial application. Determining which technologies are appropriate for particular industrial applications and then developing those technologies is a stepped process which...

  4. Polymers as advanced materials for desiccant applications

    SciTech Connect (OSTI)

    Czanderna, A.W.

    1990-12-01T23:59:59.000Z

    This research is concerned with solid materials used as desiccants for desiccant cooling systems (DCSs) that process water vapor in an atmosphere to produce cooling. Background information includes an introduction to DCSs and the role of the desiccant as a system component. The water vapor sorption performance criteria used for screening the modified polymers prepared include the water sorption capacity from 5% to 80% relative humidity (R.H.), isotherm shape, and rate of adsorption and desorption. Measurements are presented for the sorption performance of modified polymeric advanced desiccant materials with the quartz crystal microbalance. Isotherms of polystyrene sulfonic acid (PSSA) taken over a 5-month period show that the material has a dramatic loss in capacity and that the isotherm shape is time dependent. The adsorption and desorption kinetics for PSSA and all the ionic salts of it studied are easily fast enough for commercial DCS applications with a wheel rotation speed of 6 min per revolution. Future activities for the project are addressed, and a 5-year summary of the project is included as Appendix A. 34 refs., 20 figs., 3 tabs.

  5. Application of advanced hydrocarbon characterization and its...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Research on future fuels chemistry and effects on combustion in advanced internal combustion engines p-14gieleciak.pdf More Documents & Publications Effect of the Composition...

  6. Using advanced applications in a control center environment

    SciTech Connect (OSTI)

    Hunter, M.B.; Muchlinski, S.L. (Puget Sound Power and Light Co., Bellevue, WA (United States))

    1990-01-01T23:59:59.000Z

    Puget Power is currently implementing advanced power system applications with the goals to efficiently operate the power system while minimizing losses and maintaining security. This paper reports the progress Puget Power has made on these customer service oriented goals.

  7. Advances in Geosynthetics Materials and Applications for Soil Reinforcement

    E-Print Network [OSTI]

    Zornberg, Jorge G.

    in environmental protection projects, including geomembranes, geosynthetic clay liners (GCL), geonets barriers. Geosynthetic clay liners (GCLs) are geocomposites that are prefabricated with a bentonite clayAdvances in Geosynthetics Materials and Applications for Soil Reinforcement and Environmental

  8. Notices

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC)Integrated CodesTransparencyDOE Project TapsDOE Directives, Delegations,Notice to

  9. Notices

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC)Integrated CodesTransparencyDOE Project TapsDOE Directives, Delegations,Notice to843

  10. Notices

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC)Integrated CodesTransparencyDOE Project TapsDOE Directives, Delegations,Notice to84336

  11. Notices

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC)Integrated CodesTransparencyDOE Project TapsDOE Directives, Delegations,Notice

  12. Notices

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC)Integrated CodesTransparencyDOE Project TapsDOE Directives, Delegations,Notice424

  13. LBB application in the US operating and advanced reactors

    SciTech Connect (OSTI)

    Wichman, K.; Tsao, J.; Mayfield, M.

    1997-04-01T23:59:59.000Z

    The regulatory application of leak before break (LBB) for operating and advanced reactors in the U.S. is described. The U.S. Nuclear Regulatory Commission (NRC) has approved the application of LBB for six piping systems in operating reactors: reactor coolant system primary loop piping, pressurizer surge, safety injection accumulator, residual heat removal, safety injection, and reactor coolant loop bypass. The LBB concept has also been applied in the design of advanced light water reactors. LBB applications, and regulatory considerations, for pressurized water reactors and advanced light water reactors are summarized in this paper. Technology development for LBB performed by the NRC and the International Piping Integrity Research Group is also briefly summarized.

  14. Advanced Boost System Developing for High EGR Applications

    SciTech Connect (OSTI)

    Sun, Harold

    2012-09-30T23:59:59.000Z

    To support industry efforts of clean and efficient internal combustion engine development for passenger and commercial applications • This program focuses on turbocharger improvement for medium and light duty diesel applications, from complete system optimization percepective to enable commercialization of advanced diesel combustion technologies, such as HCCI/LTC. • Improve combined turbocharger efficiency up to 10% or fuel economy by 3% on FTP cycle at Tier II Bin 5 emission level.

  15. Notices

    Office of Environmental Management (EM)

    gas volume proposed to be exported will be consumed in Canada and not exported as LNG liquefied natural gas''); id. at 12 (description of project). 4 In the Application,...

  16. Advanced Pattern Material for Investment Casting Applications

    SciTech Connect (OSTI)

    F. Douglas Neece Neil Chaudhry

    2006-02-08T23:59:59.000Z

    Cleveland Tool and Machine (CTM) of Cleveland, Ohio in conjunction with Harrington Product Development Center (HPDC) of Cincinnati, Ohio have developed an advanced, dimensionally accurate, temperature-stable, energy-efficient and cost-effective material and process to manufacture patterns for the investment casting industry. In the proposed technology, FOPAT (aFOam PATtern material) has been developed which is especially compatible with the investment casting process and offers the following advantages: increased dimensional accuracy; increased temperature stability; lower cost per pattern; less energy consumption per pattern; decreased cost of pattern making equipment; decreased tooling cost; increased casting yield. The present method for investment casting is "the lost wax" process, which is exactly that, the use of wax as a pattern material, which is then melted out or "lost" from the ceramic shell. The molten metal is then poured into the ceramic shell to produce a metal casting. This process goes back thousands of years and while there have been improvements in the wax and processing technology, the material is basically the same, wax. The proposed technology is based upon an established industrial process of "Reaction Injection Molding" (RIM) where two components react when mixed and then "molded" to form a part. The proposed technology has been modified and improved with the needs of investment casting in mind. A proprietary mix of components has been formulated which react and expand to form a foam-like product. The result is an investment casting pattern with smooth surface finish and excellent dimensional predictability along with the other key benefits listed above.

  17. ECE 6050 ADVANCED MICROPROCESSOR APPLICATIONS Summer II 2009

    E-Print Network [OSTI]

    Grantner, Janos L.

    ECE 6050 ADVANCED MICROPROCESSOR APPLICATIONS Summer II 2009 Instructor: Professor Janos Grantner Description The objective of this course is to survey current microprocessors and to discuss various aspects design and in microprocessor/microcontroller systems design. Though some software topics will also

  18. Marketing Ground Source Heat Pump Advanced Applications that

    E-Print Network [OSTI]

    Marketing Ground Source Heat Pump Advanced Applications that Deliver Competitive Advantage Al is the fastest growing market with the available capital and need for the benefits of ground source heat pumps Heating ... and Cooling n Comfort & Indoor Air Quality n Homes have domestic hot water - DHW n Less

  19. An advanced unmanned vehicle for remote applications

    SciTech Connect (OSTI)

    Pletta, J.B.; Sackos, J.

    1998-03-01T23:59:59.000Z

    An autonomous mobile robotic capability is critical to developing remote work applications for hazardous environments. A few potential applications include humanitarian demining and ordnance neutralization, extraterrestrial science exploration, and hazardous waste cleanup. The ability of the remote platform to sense and maneuver within its environment is a basic technology requirement which is currently lacking. This enabling technology will open the door for force multiplication and cost effective solutions to remote operations. The ultimate goal of this work is to develop a mobile robotic platform that can identify and avoid local obstacles as it traverses from its current location to a specified destination. This goal directed autonomous navigation scheme uses the Global Positioning System (GPS) to identify the robot`s current coordinates in space and neural network processing of LADAR range images for local obstacle detection and avoidance. The initial year funding provided by this LDRD project has developed a small exterior mobile robotic development platform and a fieldable version of Sandia`s Scannerless Range Imager (SRI) system. The robotic testbed platform is based on the Surveillance And Reconnaissance ground Equipment (SARGE) robotic vehicle design recently developed for the US DoD. Contingent upon follow-on funding, future enhancements will develop neural network processing of the range map data to traverse unstructured exterior terrain while avoiding obstacles. The SRI will provide real-time range images to a neural network for autonomous guidance. Neural network processing of the range map data will allow real-time operation on a Pentium based embedded processor board.

  20. WAC 173-400-111 - Processing Notice of Construction Applications...

    Open Energy Info (EERE)

    and Portable SourcesLegal Abstract Construction application requirements for sources of air pollution. Published NA Year Signed or Took Effect 2011 Legal Citation WAC...

  1. Nanoscience and Nanotechnology: From Energy Applications to Advanced Medical Therapies

    ScienceCinema (OSTI)

    Tijana Rajh

    2010-01-08T23:59:59.000Z

    Dr. Rajh will present a general talk on nanotechnology ? an overview of why nanotechnology is important and how it is useful in various fields. The specific focus will be on Solar energy conversion, environmental applications and advanced medical therapies. She has broad expertise in synthesis and characterization of nanomaterials that are used in nanotechnology including novel hybrid systems connecting semiconductors to biological molecules like DNA and antibodies. This technology could lead to new gene therapy procedures, cancer treatments and other medical applications. She will also discuss technologies made possible by organizing small semiconductor particles called quantum dots, materials that exhibit a rich variety of phenomena that are size and shape dependent. Development of these new materials that harnesses the unique properties of materials at the 1-100 nanometer scale resulted in the new field of nanotechnology that currently affects many applications in technological and medical fields.

  2. Advanced Electric Submersible Pump Design Tool for Geothermal Applications

    SciTech Connect (OSTI)

    Xuele Qi; Norman Turnquist; Farshad Ghasripoor

    2012-05-31T23:59:59.000Z

    Electrical Submersible Pumps (ESPs) present higher efficiency, larger production rate, and can be operated in deeper wells than the other geothermal artificial lifting systems. Enhanced Geothermal Systems (EGS) applications recommend lifting 300 C geothermal water at 80kg/s flow rate in a maximum 10-5/8-inch diameter wellbore to improve the cost-effectiveness. In this paper, an advanced ESP design tool comprising a 1D theoretical model and a 3D CFD analysis has been developed to design ESPs for geothermal applications. Design of Experiments was also performed to optimize the geometry and performance. The designed mixed-flow type centrifugal impeller and diffuser exhibit high efficiency and head rise under simulated EGS conditions. The design tool has been validated by comparing the prediction to experimental data of an existing ESP product.

  3. Joining SI3N4 for Advanced Turbomachinery Applications

    SciTech Connect (OSTI)

    GLASS, S. JILL; LOEHMAN, RONALD E.; HOSKING, F. MICHAEL; STEPHENS JR., JOHN J.; VIANCO, PAUL T.; NEILSEN, MICHAEL K.; WALKER, CHARLES A.; POLLINGER, J.P.; MAHONEY, F.M.; QUILLEN, B.G.

    2000-07-01T23:59:59.000Z

    The main objective of this project was to develop reliable, low-cost techniques for joining silicon nitride (Si{sub 3}N{sub 4}) to itself and to metals. For Si{sub 3}N{sub 4} to be widely used in advanced turbomachinery applications, joining techniques must be developed that are reliable, cost-effective, and manufacturable. This project addressed those needs by developing and testing two Si{sub 3}N{sub 4} joining systems; oxynitride glass joining materials and high temperature braze alloys. Extensive measurements were also made of the mechanical properties and oxidation resistance of the braze materials. Finite element models were used to predict the magnitudes and positions of the stresses in the ceramic regions of ceramic-to-metal joints sleeve and butt joints, similar to the geometries used for stator assemblies.

  4. Advanced Power Batteries for Renewable Energy Applications 3.09

    SciTech Connect (OSTI)

    Rodney Shane

    2011-09-30T23:59:59.000Z

    This report describes the research that was completed under project title â?? Advanced Power Batteries for Renewable Energy Applications 3.09, Award Number DE-EE0001112. The report details all tasks described in the Statement of Project Objectives (SOPO). The SOPO includes purchasing of test equipment, designing tooling, building cells and batteries, testing all variables and final evaluation of results. The SOPO is included. There were various types of tests performed during the project, such as; gas collection, float current monitoring, initial capacity, high rate partial state of charge (HRPSoC), hybrid pulse power characterization (HPPC), high rate capacity, corrosion, software modeling and solar life cycle tests. The grant covered a period of two years starting October 1, 2009 and ending September 30, 2011.

  5. Current Perspectives Recent advances in processing and applications of microwave ferrites

    E-Print Network [OSTI]

    Current Perspectives Recent advances in processing and applications of microwave ferrites Vincent G: Ferrites Spinel Garnet Hexaferrite Ferromagnetic resonance Pulsed laser deposition Liquid phase epitaxy-of-the-art. For this to become a reality advances in ferrite materials must first be realized. These advances include self

  6. Advanced gas engine cogeneration technology for special applications

    SciTech Connect (OSTI)

    Plohberger, D.C.; Fessl, T.; Gruber, F.; Herdin, G.R. [Jenbacher Energiesystem AG, Jenbach (Austria)

    1995-10-01T23:59:59.000Z

    In recent years gas Otto-cycle engines have become common for various applications in the field of power and heat generation. Gas engines are chosen sometimes even to replace diesel engines, because of their clean exhaust emission characteristics and the ample availability of natural gas in the world. The Austrian Jenbacher Energie Systeme AG has been producing gas engines in the range of 300 to 1,600 kW since 1960. The product program covers state-of-the-art natural gas engines as well as advanced applications for a wide range of alterative gas fuels with emission levels comparable to Low Emission (LEV) and Ultra Low Emission Vehicle (ULEV) standards. In recent times the demand for special cogeneration applications is rising. For example, a turnkey cogeneration power plant for a total 14.4 MW electric power and heat output consisting of four JMS616-GSNLC/B spark-fired gas engines specially tuned for high altitude operation has been delivered to the well-known European ski resort of Sestriere. Sestriere is situated in the Italian Alps at an altitude of more than 2,000 m above sea level. The engines feature a turbocharging system tuned to an ambient air pressure of only 80 kPa to provide an output and efficiency of each 1.6 MW and up to 40% {at} 1,500 rpm, respectively. The ever-increasing demand for lower pollutant emissions in the US and some European countries initiates developments in new exhaust aftertreatment technologies. Thermal reactor and Selective Catalytic Reduction (SCR) systems are used to reduce tailpipe CO and NO{sub x} emissions of engines. Both SCR and thermal reactor technology will shift the engine tuning to achieve maximum efficiency and power output. Development results are presented, featuring the ultra low emission potential of biogas and natural gas engines with exhaust aftertreatment.

  7. Applications and advances of positron beam spectroscopy: appendix a

    SciTech Connect (OSTI)

    Howell, R. H., LLNL

    1997-11-05T23:59:59.000Z

    Over 50 scientists from DOE-DP, DOE-ER, the national laboratories, academia and industry attended a workshop held on November 5-7, 1997 at Lawrence Livermore National Laboratory jointly sponsored by the DOE-Division of Materials Science, The Materials Research Institute at LLNL and the University of California Presidents Office. Workshop participants were charged to address two questions: Is there a need for a national center for materials analysis using positron techniques and can the capabilities at Lawrence Livermore National Laboratory serve this need. To demonstrate the need for a national center the workshop participants discussed the technical advantages enabled by high positron currents and advanced measurement techniques, the role that these techniques will play in materials analysis and the demand for the data. There were general discussions lead by review talks on positron analysis techniques, and their applications to problems in semiconductors, polymers and composites, metals and engineering materials, surface analysis and advanced techniques. These were followed by focus sessions on positron analysis opportunities in these same areas. Livermore now leads the world in materials analysis capabilities by positrons due to developments in response to demands of science based stockpile stewardship. There was a detailed discussion of the LLNL capabilities and a tour of the facilities. The Livermore facilities now include the worlds highest current beam of keV positrons, a scanning pulsed positron microprobe under development capable of three dimensional maps of defect size and concentration, an MeV positron beam for defect analysis of large samples, and electron momentum spectroscopy by positrons. This document is a supplement to the written summary report. It contains a complete schedule, list of attendees and the vuegraphs for the presentations in the review and focus sessions.

  8. Polymers as advanced materials for desiccant applications, 1988

    SciTech Connect (OSTI)

    Czanderna, A.W.; Neidlinger, H.H.

    1990-09-01T23:59:59.000Z

    This report documents work to identify a next-generation, low-cost material with which solar energy or heat from another low-cost energy source can be used for regenerating the water vapor sorption activity of the desiccant. The objective of the work is to determine how the desired sorption performance of advanced desiccant materials can be predicted by understanding the role of the material modifications and material surfaces. The work concentrates on solid materials to be used for desiccant cooling systems and which process water vapor in an atmosphere to produce cooling. The work involved preparing modifications of polystyrene sulfonic acid sodium salt, synthesizing a hydrogel, and evaluating the sorption performances of these and similar commercially available polymeric materials; all materials were studied for their potential application in solid commercial desiccant cooling systems. Background information is also provided on desiccant cooling systems and the role of a desiccant material within such a system, and it includes the use of polymers as desiccant materials. 31 refs., 16 figs., 5 tabs.

  9. An Advanced Economizer Controller for Dual Duct Air Handling Systems - with a Case Application

    E-Print Network [OSTI]

    Liu, M.; Claridge, D. E.

    1996-01-01T23:59:59.000Z

    penalty, advanced economizers are developed in this paper. The application of the advanced economizer has resulted in $7,00O/yr savings in one 95,000 ft2 school building since 1993. The impacts of cold and hot deck settings on the energy consumption...

  10. Advanced Boost System Development for Diesel HCCI/LTC Application...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    1 DOE Hydrogen and Fuel Cells Program, and Vehicle Technologies Program Annual Merit Review and Peer Evaluation ace037sun2011o.pdf More Documents & Publications Advanced Boost...

  11. Multi-Feature Fusion in Advanced Robotics Applications Zahid Riaz, Christoph Mayer, Michael Beetz,

    E-Print Network [OSTI]

    Cremers, Daniel

    Multi-Feature Fusion in Advanced Robotics Applications Zahid Riaz, Christoph Mayer, Michael Beetz, Germany {riaz,mayerc,beetz,radig}@in.tum.de Computer Vision Research Group (COMVis) Department

  12. Location-Tracking Applications ecent technological advances in wireless loca-

    E-Print Network [OSTI]

    Gruteser, Marco

    areas they have visited. #12;Location-Tracking Applications broker as part of their service contract

  13. Evaluation of Advanced PSA and Oxygen Combustion System for Industrial Furnace Applications

    E-Print Network [OSTI]

    Delano, M. A.; Lagree, D.; Kwan, Y.

    M. A. Delano Union Carbide Corp. Tarrytown, NY ABSTRACT EVALUATION OF ADVANCED PSA AND OXYGEN COMBUSTION SYSTEM FOR INDUSTRIAL FURNACE APPLICATIONS D. Lagree Union Carbide Corp. Tonawanda, NY The performance of a pilot scale advanced PSA... oxygen generation system and a low NO x oxygen burner was evaluated for industrial furnace applications. The PSA system employs a two-bed vacuum cycle design with a capacity of 1.3 TPD at 90% O 2 purity. The oxygen generated from the PSA system...

  14. Advances in gas avalanche radiation detectors for biomedical applications

    E-Print Network [OSTI]

    , either Wire Chambers [3] or more recent advanced Micro-pattern Detectors [4,5], have been widely employed- getic X-ray or gamma photons, they often age un- der long-term operation at high radiation #ux and su beam, have shown to successfully compete with traditional "lm-screen imagers. These line-scanning

  15. Recent Advances in Application of Biosensors in Tissue Engineering

    E-Print Network [OSTI]

    Hasan, Anwarul

    Biosensors research is a fast growing field in which tens of thousands of papers have been published over the years, and the industry is now worth billions of dollars. The biosensor products have found their applications ...

  16. Advanced Mechanical Heat Pump Technologies for Industrial Applications 

    E-Print Network [OSTI]

    Mills, J. I.; Chappell, R. N.

    1985-01-01T23:59:59.000Z

    is currently being jointly explored by MTI, DOE, and the Electric Power Research Institute (EPRI). Marketing efforts are currently under way to place this hybrid heat pump in an industrial application. Companies who need help in determining whether...

  17. Advanced Fuels in HDV Applications | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny: The Future of1 AAccelerated agingDepartmentDevelopment and1 |AdvancedDepartment

  18. Responses to Questions and Answers Advanced Vehicle Technology Manufacturing Solicitation

    E-Print Network [OSTI]

    1 Responses to Questions and Answers Advanced Vehicle Technology Manufacturing Solicitation PON successful applicants after the Notice of Proposed Awards to confirm this role and obtain any additional definition of "manufacturing equipment?" For example, would purchases of tooling or assembly line equipment

  19. Enabling Advanced Environmental Conditioning with a Building Application Stack

    E-Print Network [OSTI]

    Culler, David E.

    consumption by over 80%, while the DCF application can reduce recirculating fan power consumption by half% of our electricity in the U.S. [2], are a prime opportunity for information technology to improve that govern building operation are vertically-integrated, barely programmable, and not extensible

  20. High-Performance Computing for Advanced Smart Grid Applications

    SciTech Connect (OSTI)

    Huang, Zhenyu; Chen, Yousu

    2012-07-06T23:59:59.000Z

    The power grid is becoming far more complex as a result of the grid evolution meeting an information revolution. Due to the penetration of smart grid technologies, the grid is evolving as an unprecedented speed and the information infrastructure is fundamentally improved with a large number of smart meters and sensors that produce several orders of magnitude larger amounts of data. How to pull data in, perform analysis, and put information out in a real-time manner is a fundamental challenge in smart grid operation and planning. The future power grid requires high performance computing to be one of the foundational technologies in developing the algorithms and tools for the significantly increased complexity. New techniques and computational capabilities are required to meet the demands for higher reliability and better asset utilization, including advanced algorithms and computing hardware for large-scale modeling, simulation, and analysis. This chapter summarizes the computational challenges in smart grid and the need for high performance computing, and present examples of how high performance computing might be used for future smart grid operation and planning.

  1. Advances

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office511041cloth DocumentationProducts (VAP) VAP7-0973 1BP-14Scripting for Advanced Workflows Jack

  2. Recent advances in wavefront shaping techniques for biomedical applications

    E-Print Network [OSTI]

    Yu, Hyeonseung; Lee, KyoReh; Yoon, Jonghee; Kim, KyungDuk; Lee, Shinwha; Park, YongKeun

    2015-01-01T23:59:59.000Z

    Due to the highly inhomogeneous distributions of refractive indexes, light propagation in complex media such as biological tissue experiences multiple light scattering events. The suppression and control of multiple light scattering events are investigated because they offer the possibility of optical focusing and imaging through biological tissues, and they may open new avenues for diagnosis and treatment of several human diseases. In order to provide insight into how new optical techniques can address the issues of multiple light scattering in biomedical applications, the recent progress in optical wavefront-shaping techniques is summarized.

  3. Advanced High Energy and High Power Battery Systems for Automotive Applications Khalil Amine

    E-Print Network [OSTI]

    Levi, Anthony F. J.

    -dependent Industry 41% Oil-dependent 17% Oil-dependent 72% 22% 1% 5% U.S. Oil Consumption by End-use Sector 199.30am Advanced High Energy and High Power Battery Systems for Automotive Applications Khalil Amine Argonne National Laboratory Abstract To meet the high-energy requirem ent that can enab le the 40-miles

  4. Enabling Process Support for Advanced Applications with the AristaFlow BPM Suite

    E-Print Network [OSTI]

    Pfeifer, Holger

    Enabling Process Support for Advanced Applications with the AristaFlow BPM Suite Andreas Lanz1. In this software demonstration we show how the AristaFlow BPM Suite ­ an adaptive process management system) as offered by AristaFlow. 1 Introduction In many domains IT support can benefit from BPM technologies

  5. Advanced Developments and Applications of the Fuzzy ARTMAP Neural Network in Pattern

    E-Print Network [OSTI]

    Lerner, Boaz

    Advanced Developments and Applications of the Fuzzy ARTMAP Neural Network in Pattern Classification-Gurion University, Beer-Sheva 84105, Israel Abstract. Since its inception in 1992, the fuzzy ARTMAP (FAM) neural network (NN) has attracted researchers' attention as a fast, accurate, off and online pattern classifier

  6. Saving Energy and Improving IAQ through Application of Advanced Air Cleaning Technologies

    E-Print Network [OSTI]

    Saving Energy and Improving IAQ through Application of Advanced Air Cleaning Technologies Table 1 equipment and people from particles. Criteria for Air Cleaning Reducing ventilation rates to save energy, we may be able use air cleaning systems and reduce rates of ventilation (i.e., reduce rates

  7. Application of metallic nanoparticle suspensions in advanced cooling systems

    SciTech Connect (OSTI)

    Lee, S.; Choi, S.U.S.

    1996-12-31T23:59:59.000Z

    In the development of energy-efficient heat transfer fluids that are required in many cooling applications, low thermal conductivity is a primary limitation. However, it is well known that at room temperature, metals in solid form have orders-of-magnitude higher thermal conductivities than those of fluids. Therefore, the thermal conductivities of fluids that contain suspended solid metallic particles are expected to be significantly enhanced over those of conventional heat transfer fluids. In fact, numerous theoretical and experimental studies of the effective thermal conductivity of dispersions that contain solid particles have been conducted since Maxwell`s theoretical was published more than 100 years ago. However, all of the studies on thermal conductivity of suspensions have been confined to millimeter- or micrometer-sized particles.

  8. ADVANCED CERAMIC MATERIALS FOR NEXT-GENERATION NUCLEAR APPLICATIONS

    SciTech Connect (OSTI)

    Marra, J.

    2010-09-29T23:59:59.000Z

    Rising global energy demands coupled with increased environmental concerns point to one solution; they must reduce their dependence on fossil fuels that emit greenhouse gases. As the global community faces the challenge of maintaining sovereign nation security, reducing greenhouse gases, and addressing climate change nuclear power will play a significant and likely growing role. In the US, nuclear energy already provides approximately one-fifth of the electricity used to power factories, offices, homes, and schools with 104 operating nuclear power plants, located at 65 sites in 31 states. Additionally, 19 utilities have applied to the US Nuclear Regulatory Commission (NRC) for construction and operating licenses for 26 new reactors at 17 sites. This planned growth of nuclear power is occurring worldwide and has been termed the 'nuclear renaissance.' As major industrial nations craft their energy future, there are several important factors that must be considered about nuclear energy: (1) it has been proven over the last 40 years to be safe, reliable and affordable (good for Economic Security); (2) its technology and fuel can be domestically produced or obtained from allied nations (good for Energy Security); and (3) it is nearly free of greenhouse gas emissions (good for Environmental Security). Already an important part of worldwide energy security via electricity generation, nuclear energy can also potentially play an important role in industrial processes and supporting the nation's transportation sector. Coal-to-liquid processes, the generation of hydrogen and supporting the growing potential for a greatly increased electric transportation system (i.e. cars and trains) mean that nuclear energy could see dramatic growth in the near future as we seek to meet our growing demand for energy in cleaner, more secure ways. In order to address some of the prominent issues associated with nuclear power generation (i.e., high capital costs, waste management, and proliferation), the worldwide community is working to develop and deploy new nuclear energy systems and advanced fuel cycles. These new nuclear systems address the key challenges and include: (1) extracting the full energy value of the nuclear fuel; (2) creating waste solutions with improved long term safety; (3) minimizing the potential for the misuse of the technology and materials for weapons; (4) continually improving the safety of nuclear energy systems; and (5) keeping the cost of energy affordable.

  9. Application of the LBB regulatory approach to the steamlines of advanced WWER 1000 reactor

    SciTech Connect (OSTI)

    Kiselyov, V.A.; Sokov, L.M.

    1997-04-01T23:59:59.000Z

    The LBB regulatory approach adopted in Russia in 1993 as an extra safety barrier is described for advanced WWER 1000 reactor steamline. The application of LBB concept requires the following additional protections. First, the steamline should be a highly qualified piping, performed in accordance with the applicable regulations and guidelines, carefully screened to verify that it is not subjected to any disqualifying failure mechanism. Second, a deterministic fracture mechanics analysis and leak rate evaluation have been performed to demonstrate that postulated through-wall crack that yields 95 1/min at normal operation conditions is stable even under seismic loads. Finally, it has been verified that the leak detection systems are sufficiently reliable, diverse and sensitive, and that adequate margins exist to detect a through wall crack smaller than the critical size. The obtained results are encouraging and show the possibility of the application of the LBB case to the steamline of advanced WWER 1000 reactor.

  10. Advanced I/O for large-scale scientific applications.

    SciTech Connect (OSTI)

    Klasky, Scott (Oak Ridge National Laboratory, Oak Ridge, TN); Schwan, Karsten (Georgia Institute of Technology, Atlanta, GA); Oldfield, Ron A.; Lofstead, Gerald F., II (Georgia Institute of Technology, Atlanta, GA)

    2010-01-01T23:59:59.000Z

    As scientific simulations scale to use petascale machines and beyond, the data volumes generated pose a dual problem. First, with increasing machine sizes, the careful tuning of IO routines becomes more and more important to keep the time spent in IO acceptable. It is not uncommon, for instance, to have 20% of an application's runtime spent performing IO in a 'tuned' system. Careful management of the IO routines can move that to 5% or even less in some cases. Second, the data volumes are so large, on the order of 10s to 100s of TB, that trying to discover the scientifically valid contributions requires assistance at runtime to both organize and annotate the data. Waiting for offline processing is not feasible due both to the impact on the IO system and the time required. To reduce this load and improve the ability of scientists to use the large amounts of data being produced, new techniques for data management are required. First, there is a need for techniques for efficient movement of data from the compute space to storage. These techniques should understand the underlying system infrastructure and adapt to changing system conditions. Technologies include aggregation networks, data staging nodes for a closer parity to the IO subsystem, and autonomic IO routines that can detect system bottlenecks and choose different approaches, such as splitting the output into multiple targets, staggering output processes. Such methods must be end-to-end, meaning that even with properly managed asynchronous techniques, it is still essential to properly manage the later synchronous interaction with the storage system to maintain acceptable performance. Second, for the data being generated, annotations and other metadata must be incorporated to help the scientist understand output data for the simulation run as a whole, to select data and data features without concern for what files or other storage technologies were employed. All of these features should be attained while maintaining a simple deployment for the science code and eliminating the need for allocation of additional computational resources.

  11. Current status of environmental, health, and safety issues of electrochemical capacitors for advanced vehicle applications

    SciTech Connect (OSTI)

    Vimmerstedt, L.J.; Hammel, C.J.

    1997-04-01T23:59:59.000Z

    Electrochemical capacitors are a candidate for traction power assists in hybrid electric vehicles (HEVs). Other advanced automotive applications, while not the primary focus of current development efforts, are also possible. These include load leveling high-energy batteries, power conditioning electronics, electrically hated catalysts, electric power steering, and engine starter power. Higher power and longer cycle life are expected for electrochemical capacitors than for batteries. Evaluation of environmental, health, and safety (EH and S) issues of electrochemical capacitors is an essential part of the development and commercialization of electrochemical capacitors for advanced vehicles. This report provides an initial EH and S assessment. This report presents electrochemical capacitor electrochemistry, materials selection, intrinsic material hazards, mitigation of those hazards, environmental requirements, pollution control options, and shipping requirements. Most of the information available for this assessment pertains to commercial devices intended for application outside the advanced vehicle market and to experiment or prototype devices. Electrochemical capacitors for power assists in HEVs are not produced commercially now. Therefore, materials for advanced vehicle electrochemical capacitors may change, and so would the corresponding EH and S issues. Although changes are possible, this report describes issues for likely electrochemical capacitor designs.

  12. Notice of Construction (NOC) Application for Criteria and Toxic Air Pollutant Emissions from Thermal Stabilization of Polycubes at the PFP

    SciTech Connect (OSTI)

    RANADE, D.G.

    2000-11-01T23:59:59.000Z

    This is a notice of construction (NOC) application for thermal stabilization of plutonium in a polystyrene matrix (polycubes) in the muffle furnaces at the Plutonium Finishing Plant (PFP). This NOC application is required by Washington Administrative Code (WAC) 173-460-040. During the 1960's and 1970's, polycubes were thermally stabilized using a pyrolysis process at PFP. The proposed process of thermal stabilization of polycubes in muffle furnaces results in emissions of air contaminants not emitted since implementation of WAC 173-460 (effective 9/18/91). The new process and related air contaminants are the basis for this NOC application. The proposed activity would use the muffle furnaces in the 234-52 Building to stabilize polycubes. The resulting plutonium oxides would be packaged to meet storage requirements specified in Stabilization, Packaging, and Storage of Plutonium Bearing Materials (DOE-STD-3013). The PFP is located in the 200 West Area of the Hanford Site. The PFP consists of several large and small buildings that are grouped to form the processing complex. The PFP activities are focused on the stabilization of plutonium-bearing materials to a form suitable for long-term storage; immobilization of residual plutonium-bearing materials; and removal of readily retrievable, plutonium-bearing materials left behind in process equipment and process areas.

  13. Tokamaks with high-performance resistive magnets: advanced test reactors and prospects for commercial applications

    SciTech Connect (OSTI)

    Bromberg, L.; Cohn, D.R.; Williams, J.E.C.; Becker, H.; Leclaire, R.; Yang, T.

    1981-10-01T23:59:59.000Z

    Scoping studies have been made of tokamak reactors with high performance resistive magnets which maximize advantages gained from high field operation and reduced shielding requirements, and minimize resistive power requirements. High field operation can provide very high values of fusion power density and n tau/sub e/ while the resistive power losses can be kept relatively small. Relatively high values of Q' = Fusion Power/Magnet Resistive Power can be obtained. The use of high field also facilitates operation in the DD-DT advanced fuel mode. The general engineering and operational features of machines with high performance magnets are discussed. Illustrative parameters are given for advanced test reactors and for possible commercial reactors. Commercial applications that are discussed are the production of fissile fuel, electricity generation with and without fissioning blankets and synthetic fuel production.

  14. Advanced Sensors and Controls for Building Applications: Market Assessment and Potential R&D Pathways

    SciTech Connect (OSTI)

    Brambley, Michael R.; Haves, Philip; McDonald, Sean C.; Torcellini, Paul; Hansen, David G.; Holmberg, David; Roth, Kurt

    2005-04-13T23:59:59.000Z

    Significant energy savings can be achieved in commercial building operation, along with increased comfort and control for occupants, through the implementation of advanced technologies. This document provides a market assessment of existing building sensors and controls and presents a range of technology pathways (R&D options) for pursuing advanced sensors and building control strategies. This paper is actually a synthesis of five other white papers: the first describes the market assessment including estimates of market potential and energy savings for sensors and control strategies currently on the market as well as a discussion of market barriers to these technologies. The other four cover technology pathways: (1) current applications and strategies for new applications, (2) sensors and controls, (3) networking, security, and protocols and standards, and (4) automated diagnostics, performance monitoring, commissioning, optimal control and tools. Each technology pathway chapter gives an overview of the technology or application. This is followed by a discussion of needs and the current status of the technology. Finally, a series of research topics is proposed.

  15. Development of advanced magnetic resonance sensor for industrial applications. Final report

    SciTech Connect (OSTI)

    De Los Santos, A.

    1997-06-01T23:59:59.000Z

    Southwest Research Institute (SwRI) and various subcontractors, in a cooperative agreement with the DOE, have developed and tested an advanced magnetic resonance (MR) sensor for several industrial applications and made various market surveys. The original goal of the program was to develop an advanced moisture sensor to allow more precise and rapid control of drying processes so that energy and/or product would not be wasted. Over the course of the program, it was shown that energy savings were achievable but in many processes the return in investment did not justify the cost of a magnetic resonance sensor. However, in many processes, particularly chemical, petrochemical, paper and others, the return in investment can be very high as to easily justify the cost of a magnetic resonance sensor. In these industries, substantial improvements in product yield, quality, and efficiency in production can cause substantial energy savings and reductions in product wastage with substantial environmental effects. The initial applications selected for this program included measurement of corn gluten at three different points and corn germ at one point in an American Maize corn processing plant. During the initial phases (I and II) of this program, SwRI developed a prototype advanced moisture sensor utilizing NMR technology capable of accurately and reliably measuring moisture in industrial applications and tested the sensor in the laboratory under conditions simulating on-line products in the corn wet milling industry. The objective of Phase III was to test the prototype sensor in the plant environment to determine robustness, reliability and long term stability. Meeting these objectives would permit extended field testing to improve the statistical database used to calibrate the sensor and subject the sensor to true variations in operating conditions encountered in the process rather than those which could only be simulated in the laboratory.

  16. Advancement of Energy Storage Devices and Applications in Electrical Power System

    SciTech Connect (OSTI)

    Smith, S. C.; Sen, P. K.; Kroposki, B.

    2008-01-01T23:59:59.000Z

    Overall structure of electrical power system is in the process of changing. For incremental growth, it is moving away from fossil fuel based operations to renewable energy resources that are more environmentally friendly and sustainable. At the same time it has to grow to meet the ever increasing need for more energy. These changes bring very unique opportunities and obstacles. Over the past few decades many new and innovative ideas have been explored in the broad area of energy storage. They range in size, capacity and complexity in design. Some of the systems are designed for applications in large scale power and others are performing short term energy storage ride through capabilities for critical manufacturing and technology systems. Energy storage technology has become an enabling technology for renewable energy applications and enhancing power quality in the transmission and distribution power systems. This paper summarizes all the advancements made and provide a composite picture of costs and trends in storage technologies.

  17. Recent advances in phosphate laser glasses for high power applications. Revision 1

    SciTech Connect (OSTI)

    Campbell, J.H.

    1996-05-01T23:59:59.000Z

    Recent advances in Nd-doped phosphate laser glasses for high-peak-power and high-average-power applications are reviewed. Compositional studies have progressed to the point that glasses can be tailored to have specific properties for specific applications. Non-radiative relaxation effects can be accurately modeled and empirical expressions have been developed to evaluate both intrinsic (structural) and extrinsic (contamination induced) relaxation effects. Losses due to surface scattering and bulk glass absorption have been carefully measured and can be accurately predicted. Improvements in processing have lead to high damage threshold (e.g. Pt inclusion free) and high thermal shock resistant glasses with improved edge claddings. High optical quality pieces up to 79 x 45 x 4 cm{sup 3} have been made and methods for continuous melting laser glass are under development.

  18. Application of advanced laser diagnostics to hypersonic wind tunnels and combustion systems.

    SciTech Connect (OSTI)

    North, Simon W. (Texas A& M University, College Station, TX); Hsu, Andrea G. (Texas A& M University, College Station, TX); Frank, Jonathan H.

    2009-09-01T23:59:59.000Z

    This LDRD was a Sandia Fellowship that supported Andrea Hsu's PhD research at Texas A&M University and her work as a visitor at Sandia's Combustion Research Facility. The research project at Texas A&M University is concerned with the experimental characterization of hypersonic (Mach>5) flowfields using experimental diagnostics. This effort is part of a Multidisciplinary University Research Initiative (MURI) and is a collaboration between the Chemistry and Aerospace Engineering departments. Hypersonic flight conditions often lead to a non-thermochemical equilibrium (NTE) state of air, where the timescale of reaching a single (equilibrium) Boltzmann temperature is much longer than the timescale of the flow. Certain molecular modes, such as vibrational modes, may be much more excited than the translational or rotational modes of the molecule, leading to thermal-nonequilibrium. A nontrivial amount of energy is therefore contained within the vibrational mode, and this energy cascades into the flow as thermal energy, affecting flow properties through vibrational-vibrational (V-V) and vibrational-translational (V-T) energy exchanges between the flow species. The research is a fundamental experimental study of these NTE systems and involves the application of advanced laser and optical diagnostics towards hypersonic flowfields. The research is broken down into two main categories: the application and adaptation of existing laser and optical techniques towards characterization of NTE, and the development of new molecular tagging velocimetry techniques which have been demonstrated in an underexpanded jet flowfield, but may be extended towards a variety of flowfields. In addition, Andrea's work at Sandia National Labs involved the application of advanced laser diagnostics to flames and turbulent non-reacting jets. These studies included quench-free planar laser-induced fluorescence measurements of nitric oxide (NO) and mixture fraction measurements via Rayleigh scattering.

  19. HTGR applications program advanced systems. Semiannual report, October 1, 1982-March 31, 1983

    SciTech Connect (OSTI)

    None

    1983-05-01T23:59:59.000Z

    Work Breakdown Structure (WBS 41) activities emphasize the advanced HTGR modular reactor system (MRS) for reformer (R) and steam cycle/-cogeneration (SC/C) applications. This report describes progress in system performance for a 250-MW(t) MRS-R and a 300-MW(t) MRS-SC/C plant; it details the groundrules and parameters for the FY-83 nuclear core design and examines and compares fuel cycle economics. This report gives results from a study on decay heat removal transients for the MRS-R and MRS-SC/C variants. It evaluates the bypass valve system and the number and location of helium circulators, and it describes the progress on circulator component design, a prestressed concrete vessel steel closure design, and plant licensing and safety. Under the Advanced Technology Transfer Task (WBS 15), this report includes a section on a pebble bed reactor (PBR) MRS core heatup thermal model analysis. This report also gives the results of a survey on candidate reformer tube materials from GA Technologies Inc. to identify acceptable substitute materials for Inconel 617 to alleviate possible cobalt activation and carburization problems.

  20. Application of high temperature air heaters to advanced power generation cycles

    SciTech Connect (OSTI)

    Thompson, T R [Tennessee Valley Authority, Chattanooga, TN (United States)] [Tennessee Valley Authority, Chattanooga, TN (United States); Boss, W H; Chapman, J N [Tennessee Univ., Tullahoma, TN (United States). Space Inst.] [Tennessee Univ., Tullahoma, TN (United States). Space Inst.

    1992-03-01T23:59:59.000Z

    Recent developments in ceramic composite materials open up the possibility of recuperative air heaters heating air to temperatures well above the feasible with metal tubes. A high temperature air heater (HTAH) has long been recognized as a requirement for the most efficient MHD plants in order to reach high combustor flame temperatures. The application of gas turbines in coal-fired plants of all types has been impeded because of the problems in cleaning exhaust gas sufficiently to avoid damage to the turbine. With a possibility of a HTAH, such plants may become feasible on the basis of air turbine cycles, in which air is compressed and heated in the HTAH before being applied to turbine. The heat exchanger eliminates the need for the hot gas cleanup system. The performance improvement potential of advanced cycles with HTAH application including the air turbine cycle in several variations such as the DOE program on ``Coal-Fired Air Furnace Combined Cycle...,`` variations originated by the authors, and the MHD combined cycle are presented. The status of development of ceramic air heater technology is included.

  1. Engineering development of advanced physical fine coal cleaning for premium fuel applications. Quarterly report, April 1--June 30, 1997

    SciTech Connect (OSTI)

    Moro, N.; Shields, G.L.; Smit, F.J.; Jha, M.C.

    1997-12-31T23:59:59.000Z

    The primary goal of this project is the engineering development of two advanced physical fine coal cleaning processes, column flotation and selective agglomeration, for premium fuel applications. The project scope includes laboratory research and bench-scale testing on six coals to optimize these processes, followed by the design, construction, and operation of a 2 t/hr process development unit (PDU). Accomplishments during the quarter are described on the following tasks and subtasks: Development of near-term applications (engineering development and dewatering studies); Engineering development of selective agglomeration (bench-scale testing and process scale-up); PDU and advanced column flotation module (coal selection and procurement and advanced flotation topical report); Selective agglomeration module (module operation and clean coal production with Hiawatha, Taggart, and Indiana 7 coals); Disposition of the PDU; and Project final report. Plans for next quarter are discussed and agglomeration results of the three tested coals are presented.

  2. Advanced Turbine Technology Applications Project (ATTAP) and Hybrid Vehicle Turbine Engine Technology Support project (HVTE-TS): Final summary report

    SciTech Connect (OSTI)

    NONE

    1998-12-01T23:59:59.000Z

    This final technical report was prepared by Rolls-Royce Allison summarizing the multiyear activities of the Advanced Turbine Technology Applications Project (ATTAP) and the Hybrid Vehicle Turbine Engine Technology Support (HVTE-TS) project. The ATTAP program was initiated in October 1987 and continued through 1993 under sponsorship of the US Department of Energy (DOE), Energy Conservation and Renewable Energy, Office of Transportation Technologies, Propulsion Systems, Advanced Propulsion Division. ATTAP was intended to advance the technological readiness of the automotive ceramic gas turbine engine. The target application was the prime power unit coupled to conventional transmissions and powertrains. During the early 1990s, hybrid electric powered automotive propulsion systems became the focus of development and demonstration efforts by the US auto industry and the Department of energy. Thus in 1994, the original ATTAP technology focus was redirected to meet the needs of advanced gas turbine electric generator sets. As a result, the program was restructured to provide the required hybrid vehicle turbine engine technology support and the project renamed HVTE-TS. The overall objective of the combined ATTAP and HVTE-TS projects was to develop and demonstrate structural ceramic components that have the potential for competitive automotive engine life cycle cost and for operating 3,500 hr in an advanced high temperature turbine engine environment. This report describes materials characterization and ceramic component development, ceramic components, hot gasifier rig testing, test-bed engine testing, combustion development, insulation development, and regenerator system development. 130 figs., 12 tabs.

  3. University programs of the U.S. Department of Energy advanced accelerator applications program

    SciTech Connect (OSTI)

    Beller, D. E. (Denis E.); Ward, T. E. (Thomas E.); Bresee, J. C.

    2001-01-01T23:59:59.000Z

    The Advanced Accelerator Applications (AAA) Program was initiated in fiscal year 2001 (FY-01) by the U.S. Congress, the U.S. Department of Energy (DOE), and the Los Alamos National Laboratory (LANL) in partnership with other national laboratories. The primary goal of this program is to investigate the feasibility of transmutation of nuclear waste. An Accelerator-Driven Test Facility (ADTF), which may be built during the first decade of the 21st Century, is a major component of this effort. The ADTF would include a large, state-of-the-art charged-particle accelerator, proton-neutron target systems, and accelerator-driven R&D systems. This new facility and its underlying science and technology will require a large cadre of educated scientists and trained technicians. In addition, other applications of nuclear science and engineering (e.g., proliferation monitoring and defense, nuclear medicine, safety regulation, industrial processes, and many others) require increased academic and national infrastructure and student populations. Thus, the AAA Program Office has begun a multi-year program to involve university faculty and students in various phases of the Project to support the infrastructure requirements of nuclear energy, science and technology fields as well as the special needs of the DOE transmutation program. In this paper we describe university programs that have supported, are supporting, and will support the R&D necessary for the AAA Project. Previous work included research for the Accelerator Transmutation of Waste (ATW) project, current (FY-01) programs include graduate fellowships and research for the AAA Project, and it is expected that future programs will expand and add to the existing programs.

  4. Diamond and Hydrogenated Carbons for Advanced Batteries and Fuel Cells: Fundamental Studies and Applications.

    SciTech Connect (OSTI)

    Swain; Greg M.

    2009-04-13T23:59:59.000Z

    The original funding under this project number was awarded for a period 12/1999 until 12/2002 under the project title Diamond and Hydrogenated Carbons for Advanced Batteries and Fuel Cells: Fundamental Studies and Applications. The project was extended until 06/2003 at which time a renewal proposal was awarded for a period 06/2003 until 06/2008 under the project title Metal/Diamond Composite Thin-Film Electrodes: New Carbon Supported Catalytic Electrodes. The work under DE-FG02-01ER15120 was initiated about the time the PI moved his research group from the Department of Chemistry at Utah State University to the Department of Chemistry at Michigan State University. This DOE-funded research was focused on (i) understanding structure-function relationships at boron-doped diamond thin-film electrodes, (ii) understanding metal phase formation on diamond thin films and developing electrochemical approaches for producing highly dispersed electrocatalyst particles (e.g., Pt) of small nominal particle size, (iii) studying the electrochemical activity of the electrocatalytic electrodes for hydrogen oxidation and oxygen reduction and (iv) conducting the initial synthesis of high surface area diamond powders and evaluating their electrical and electrochemical properties when mixed with a Teflon binder.

  5. Federal Register Notice EPAct 2005 Section 242 Hydroelectric Incentive Program: January 2015

    Broader source: Energy.gov [DOE]

    Federal Register Notice for the EPAct 2005 Section 242 Hydroelectric Incentive Program application period announcement: January, 2015.

  6. Development and Application of Advanced Models for Steam Hydrogasification: Process Design and Economic Evaluation

    E-Print Network [OSTI]

    Lu, Xiaoming

    2012-01-01T23:59:59.000Z

    Gas Turbine Power (MWe) Steam Turbine Power (MWe) Total (for the 2015 advanced steam turbine configuration for powerthe LP section of the steam turbine set. Finally, the fuel

  7. EIS-0463: Notice of Intent to Prepare an Environmental Impact...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    an Environmental Impact Statement and Conduct Public Scoping Meetings Presidential Permit Application for Northern Pass Transmission, New Hampshire Notice of Intent To Prepare...

  8. EIS-0463: Notice of Public Meeting Location Change | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Location Change EIS-0463: Notice of Public Meeting Location Change Presidential Permit Application for Northern Pass Transmission, New Hampshire On September 6, 2013, DOE...

  9. EIS-0463: Notice of Intent to Prepare an Environmental Impact...

    Energy Savers [EERE]

    Intent to Prepare an Environmental Impact Statement and Conduct Public Scoping Meetings Presidential Permit Application for Northern Pass Transmission, New Hampshire Notice of...

  10. Development and Application of Advanced Models for Steam Hydrogasification: Process Design and Economic Evaluation

    E-Print Network [OSTI]

    Lu, Xiaoming

    2012-01-01T23:59:59.000Z

    the same 2015 advanced gas turbine and RTI warm gas cleanupis used as fuel in a gas turbine which produces electricalcycle, flue gas from the gas turbine exhaust is used in a

  11. Solar energy power generators with advanced thermionic converters for spacecraft applications

    SciTech Connect (OSTI)

    Sahin, S.

    1981-01-01T23:59:59.000Z

    This study presents (1) a 50 kW/sub e/ solar energy generator in a geostationary orbit for direct tv-broadcasting and (2) a 10 GW/sub e/ space power plant, with the basic engineering outlines using an advanced thermionic converter proposal given for each. Further, a comparison of the main technical data for the generators with corresponding energy output using (1) advanced thermionic converter and (2) ordinary thermionic converter without auxiliary emitter is shown. 25 refs.

  12. Assessment of Metal Media Filters for Advanced Coal-Based Power Generation Applications

    SciTech Connect (OSTI)

    Alvin, M.A.

    2002-09-19T23:59:59.000Z

    Advanced coal and biomass-based gas turbine power generation technologies (IGCC, PFBC, PCFBC, and Hipps) are currently under development and demonstration. Efforts at Siemens Westinghouse Power Corporation (SWPC) have been focused on the development and demonstration of hot gas filter systems as an enabling technology for power generation. This paper reviews SWPC's material and component assessment efforts, identifying the performance, stability, and life of porous metal, advanced alloy, and intermetallic filters under simulated, pressurized fluidized-bed combustion conditions.

  13. Application for Presidential Permit OE Docket No. PP-387 Soule...

    Energy Savers [EERE]

    Hydro: Notice of Intervention by Department of Agriculture Application for Presidential Permit OE Docket No. PP-387 Soule Hydro: Notice of Intervention by Department of Agriculture...

  14. Application for Presidential Permit OE Docket No. PP-229 Tucson...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Company: Federal Register Notice Volume 65, No. 183 - Sep. 20, 2000 Application for Presidential Permit OE Docket No. PP-229 Tucson Electric Power Company: Federal Register Notice...

  15. Application for presidential permit OE Docket No. PP-371 Northern...

    Office of Environmental Management (EM)

    LLC: Federal Register Notice Volume 75, No. 220 - Nov. 16, 2010 Application for presidential permit OE Docket No. PP-371 Northern Pass Transmission LLC: Federal Register Notice...

  16. Comparative analysis of compact heat exchangers for application as the intermediate heat exchanger for advanced nuclear reactors

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Bartel, N.; Chen, M.; Utgikar, V. P.; Sun, X.; Kim, I. H.; Christensen, R.; Sabharwall, P.

    2015-07-01T23:59:59.000Z

    A comparative evaluation of alternative compact heat exchanger designs for use as the intermediate heat exchanger in advanced nuclear reactor systems is presented in this article. Candidate heat exchangers investigated included the Printed circuit heat exchanger (PCHE) and offset strip-fin heat exchanger (OSFHE). Both these heat exchangers offer high surface area to volume ratio (a measure of compactness [m2/m3]), high thermal effectiveness, and overall low pressure drop. Helium–helium heat exchanger designs for different heat exchanger types were developed for a 600 MW thermal advanced nuclear reactor. The wavy channel PCHE with a 15° pitch angle was found to offer optimummore »combination of heat transfer coefficient, compactness and pressure drop as compared to other alternatives. The principles of the comparative analysis presented here will be useful for heat exchanger evaluations in other applications as well.« less

  17. ADVANCED SORBENT DEVELOPMENT PROGRAM DEVELOPMENT OF SORBENTS FOR MOVING-BED AND FLUIDIZED-BED APPLICATIONS

    SciTech Connect (OSTI)

    R.E Ayala; V.S. Venkataramani; Javad Abbasian; Rachid B. Slimane; Brett E. Williams; Minoo K. Zarnegar; James R. Wangerow; Andy H. Hill

    2000-03-31T23:59:59.000Z

    The integrated gasification combined cycle (IGCC) power system using high-temperature coal gas cleanup is one of the most promising advanced technologies for the production of electric power from coal in an environmentally acceptable manner. Unlike conventional low-temperature cleanup systems that require costly heat exchangers, high-temperature coal gas cleanup systems can be operated near 482-538 C (900-1000 F) or higher, conditions that are a closer match with the gasifier and turbine components in the IGCC system, thus resulting is a more efficient overall system. GE is developing a moving-bed, high-temperature desulfurization system for the IGCC power cycle in which zinc-based regenerable sorbents are currently being used as desulfurization sorbents. Zinc titanate and other proprietary zinc-based oxides are being considered as sorbents for use in the Clean Coal Technology Demonstration Program at Tampa Electric Co.'s (TECo) Polk Power Station. Under cold startup conditions at TECo, desulfurization and regeneration may be carried out at temperatures as low as 343 C (650 F), hence a versatile sorbent is desirable to perform over this wide temperature range. A key to success in the development of high-temperature desulfurization systems is the matching of sorbent properties for the selected process operating conditions, namely, sustainable desulfurization kinetics, high sulfur capacity, and mechanical durability over multiple cycles. Additionally, the sulfur species produced during regeneration of the sorbent must be in a form compatible with sulfur recovery systems, such as sulfuric acid or elemental sulfur processes. The overall objective of this program is to develop regenerable sorbents for hydrogen sulfide removal from coal-derived fuel gases in the temperature range 343-538 C (650-1000 F). Two categories of reactor configurations are being considered: moving-bed reactors and fluidized-bed (bubbling and circulating) reactors. In addition, a cost assessment and a market plan for large-scale fabrication of sorbents were developed. As an optional task, long-term bench-scale tests of the best moving-bed sorbents were conducted. Starting from thermodynamic calculations, several metal oxides were identified for potential use as hot gas cleanup sorbents using constructed phase stability diagrams and laboratory screening of various mixed-metal oxide formulations. Modified zinc titanates and other proprietary metal oxide formulations were evaluated at the bench scale and many of them found to be acceptable for operation in the target desulfurization temperature range of 370 C (700 F) to 538 C (1000 F) and regeneration temperatures up to 760 C (1400 F). Further work is still needed to reduce the batch-to-batch repeatability in the fabrication of modified zinc titanates for larger scale applications. The information presented in this Volume 1 report contains the results of moving-bed sorbent development at General Electric's Corporate Research and Development (GE-CRD). A separate Volume 2 report contains the results of the subcontract on fluidized-bed sorbent development at the Institute of Gas Technology (IGT).

  18. advanced reactors advanced: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

  19. advanced ceramics advanced: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

  20. Radioactive Air Emissions Notice of Construction Application for Installation and Operation of a Waste Retrieval System in Tanks 241-AN-101

    SciTech Connect (OSTI)

    HILL, J.S.

    2000-05-15T23:59:59.000Z

    This document serves as a notice of construction (NOC) pursuant to the requirements of Washington Administrative Code (WAC) 246-247-060, and as a request for approval to modify pursuant to 40 Code of Federal Regulations (CFR) 61.07, for the installation and operation of one waste retrieval system in each of the following tanks; 241-AN-101, -AN-102, -AN-103, -AN-104, -AN-105 and -AN-107. Pursuant to 40 CFR 61.09 (aXI), this application is also intended to provide anticipated initial start-up notification. It is requested that EPA approval of this application will also constitute EPA acceptance of the initial start-up notification. This NOC covers the installation and operation o f a waste retrieval system in tanks 241-AN-101, -AN-102, -AN-103, -AN-104, -AN-105 and -AN-107, and the 241-AN-A/-B Valve Pits. Generally, this includes removal of existing equipment, installation of new equipment, and construction of new ancillary equipment and buildings between now and the year2011. Tanks 241-AN-101, -AN-102, -AN-103, -AN-104, -AN-105 and -AN-107 will provide waste feed for immobilization into a low activity waste (LAW) product.

  1. Development and Application of Advanced Models for Steam Hydrogasification: Process Design and Economic Evaluation

    E-Print Network [OSTI]

    Lu, Xiaoming

    2012-01-01T23:59:59.000Z

    Bell D, Towler B. Coal Gasification and Its Applications.C, Chaney R. Alaskan coal gasification feasibility studies -Task 2 Topical Report: Coke/Coal Gasification with Liquids

  2. Application of a Tractive Energy Analysis to Quantify the Benefits of Advanced Efficiency Technologies Using Characteristic Drive Cycle Data

    SciTech Connect (OSTI)

    LaClair, Tim J [ORNL

    2012-01-01T23:59:59.000Z

    Accurately predicting the fuel savings that can be achieved with the implementation of various technologies developed for fuel efficiency can be very challenging, particularly when considering combinations of technologies. Differences in the usage of highway vehicles can strongly influence the benefits realized with any given technology, which makes generalizations about fuel savings inappropriate for different vehicle applications. A model has been developed to estimate the potential for reducing fuel consumption when advanced efficiency technologies, or combinations of these technologies, are employed on highway vehicles, particularly medium- and heavy-duty trucks. The approach is based on a tractive energy analysis applied to drive cycles representative of the vehicle usage, and the analysis specifically accounts for individual energy loss factors that characterize the technologies of interest. This tractive energy evaluation is demonstrated by analyzing measured drive cycles from a long-haul trucking fleet and the results of an assessment of the fuel savings potential for combinations of technologies are presented. The results of this research will enable more reliable estimates of the fuel savings benefits that can be realized with particular technologies and technology combinations for individual trucking applications so that decision makers can make informed investment decisions for the implementation of advanced efficiency technologies.

  3. Advanced Corrosion-Resistant Zr Alloys for High Burnup and Generation IV Applications

    SciTech Connect (OSTI)

    Arthur Motta; Yong Hwan Jeong; R.J. Comstock; G.S. Was; Y.S. Kim

    2006-10-31T23:59:59.000Z

    The objective of this collaboration between four institutions in the US and Korea is to demonstrate a technical basis for the improvement of the corrosion resistance of zirconium-based alloys in more extreme operating environments (such as those present in severe fuel duty,cycles (high burnup, boiling, aggressive chemistry) andto investigate the feasibility (from the point of view of corrosion rate) of using advanced zirconium-based alloys in a supercritical water environment.

  4. Development and application of a probabilistic evaluation method for advanced process technologies

    SciTech Connect (OSTI)

    Frey, H.C.; Rubin, E.S.

    1991-04-01T23:59:59.000Z

    The objective of this work is to develop and apply a method for research planning for advanced process technologies. To satisfy requirements for research planning, it is necessary to: (1) identify robust solutions to process design questions in the face of uncertainty to eliminate inferior design options; (2) identify key problem areas in a technology that should be the focus of further research to reduce the risk of technology failure; (3) compare competing technologies on a consistent basis to determine the risks associated with adopting a new technology; and (4) evaluate the effects that additional research might have on comparisons with conventional technology. An important class of process technologies are electric power plants. In particular, advanced clean coal technologies are expected to play a key role in the energy and environmental future of the US, as well as in other countries. Research planning for advanced clean coal technology development is an important part of energy and environmental policy. Thus, the research planning method developed here is applied to case studies focusing on a specific clean coal technology. The purpose of the case studies is both to demonstrate the research planning method and to obtain technology-specific conclusions regarding research strategies.

  5. Development and application of a probabilistic evaluation method for advanced process technologies. Final report

    SciTech Connect (OSTI)

    Frey, H.C.; Rubin, E.S.

    1991-04-01T23:59:59.000Z

    The objective of this work is to develop and apply a method for research planning for advanced process technologies. To satisfy requirements for research planning, it is necessary to: (1) identify robust solutions to process design questions in the face of uncertainty to eliminate inferior design options; (2) identify key problem areas in a technology that should be the focus of further research to reduce the risk of technology failure; (3) compare competing technologies on a consistent basis to determine the risks associated with adopting a new technology; and (4) evaluate the effects that additional research might have on comparisons with conventional technology. An important class of process technologies are electric power plants. In particular, advanced clean coal technologies are expected to play a key role in the energy and environmental future of the US, as well as in other countries. Research planning for advanced clean coal technology development is an important part of energy and environmental policy. Thus, the research planning method developed here is applied to case studies focusing on a specific clean coal technology. The purpose of the case studies is both to demonstrate the research planning method and to obtain technology-specific conclusions regarding research strategies.

  6. Topping combustor application to the Wilsonville Advanced Power Systems Development Facility

    SciTech Connect (OSTI)

    Domeracki, W.F. [Westinghouse Electric Corp., Orlando, FL (United States); Bachovchin, D.M. [Westinghouse Electric Corp., Pittsburgh, PA (United States); Crumm, C.J. [Foster Wheeler USA Corp., Clinton, NJ (United States); Morton, F.C. [Southern Co. Services, Wilsonville, AL (United States)

    1997-12-31T23:59:59.000Z

    The Advanced Power Systems Development Facility (PSDF) located at Wilsonville Alabama is a Department of Energy (DOE) and Industry cost-shared facility which will be operated by Southern Company Services. This facility is designed to provide long-term hot gas cleanup and process testing for an Advanced Pressurized Fluidized Bed Combustion (PFBC) and Gasification System. It incorporates carbonization with a circulating fluidized bed and topping combustion system. The plant will produce 4 MW of electricity. It is being designed by Foster Wheeler and is scheduled to commence operation in 1998. As in any new technology or project there is usually a number of critical components whose successful development form the foundation for the overall success of the concept. In the development of advanced (PFBC) power generation plants, one of those critical components is the topping combustion system. This paper presents the criteria for the Westinghouse developed Topping Combustor that will fire a coal derived high temperature, ammonia-rich syngas into a high temperature vitiated air stream to drive an Allison Model 501-KM gas turbine.

  7. The dynamic information architecture system : an advanced simulation framework for military and civilian applications.

    SciTech Connect (OSTI)

    Campbell, A. P.; Hummel, J. R.

    1998-01-08T23:59:59.000Z

    DIAS, the Dynamic Information Architecture System, is an object-oriented simulation system that was designed to provide an integrating framework in which new or legacy software applications can operate in a context-driven frame of reference. DIAS provides a flexible and extensible mechanism to allow disparate, and mixed language, software applications to interoperate. DIAS captures the dynamic interplay between different processes or phenomena in the same frame of reference. Finally, DIAS accommodates a broad range of analysis contexts, with widely varying spatial and temporal resolutions and fidelity.

  8. Advancing Plug-In Hybrid Technology and Flex Fuel Application on a Chrysler Minivan

    SciTech Connect (OSTI)

    Bazzi, Abdullah; Barnhart, Steven

    2014-12-31T23:59:59.000Z

    FCA US LLC viewed this DOE funding as a historic opportunity to begin the process of achieving required economies of scale on technologies for electric vehicles. The funding supported FCA US LLC’s light-duty electric drive vehicle and charging infrastructure-testing activities and enabled FCA US LLC to utilize the funding on advancing Plug-in Hybrid Electric Vehicle (PHEV) technologies to future programs. FCA US LLC intended to develop the next generations of electric drive and energy batteries through a properly paced convergence of standards, technology, components, and common modules, as well as first-responder training and battery recycling. To support the development of a strong, commercially viable supplier base, FCA US LLC also used this opportunity to evaluate various designated component and sub-system suppliers. The original project proposal was submitted in December 2009 and selected in January 2010. The project ended in December 2014.

  9. Application of advanced composites for efficient on-board storage of fuel in natural gas vehicles

    SciTech Connect (OSTI)

    Sirosh, S.N. [EDO Canada Ltd., Calgary, Alberta (Canada)

    1995-11-01T23:59:59.000Z

    The following outlines the performance requirements for high pressure containers for on-board storage of fuel in Natural Gas Vehicles. The construction of state-of-the-art carbon-fiber reinforced all-composite cylinders is described and the validation testing and key advantages are discussed. Carbon-fiber reinforced advanced composite technology offers a number of key advantages to the NGV industry, by providing: improved range, including up to 30% more fuel storage for a given storage envelope and up to 300% more fuel storage for a given weight allowance; life-cycle cost advantages, including savings in non-recurring costs (installation), savings in recurring costs (fuel and maintenance), and increased revenues from more passengers/payload; and uncompromising safety, namely, superior resistance to degradation from fatigue or stress rupture and inherent resistance to corrosion; proven toughness/impact resistance.

  10. Application to Export Electric Energy OE Docket No. EA-403 Frontera...

    Energy Savers [EERE]

    LLC: Federal Register Notice, Volume 79, No. 207 - October 27, 2014 Application to Export Electric Energy OE Docket No. EA-403 Frontera Marketing, LLC: Federal Register Notice,...

  11. Application to Export Electric Energy OE Docket No. EA-387 Energia...

    Broader source: Energy.gov (indexed) [DOE]

    LLC: Federal Register Notice, Volume 77, No. 241 - Dec. 14, 2012 Application from Energia Renovable to export electric energy to Mexico. Federal Register Notice. EA-387 Energia...

  12. Application to Export Electric Energy OE Docket No. EA-289 Intercom...

    Energy Savers [EERE]

    Inc: Federal Register Notice Volume 76, No. 14 - Jan. 21 - 2011 Application to Export Electric Energy OE Docket No. EA-289 Intercom Energy, Inc: Federal Register Notice Volume...

  13. Application to Export Electric Energy OE Docket No. EA-390 Global...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    LLC.: Federal Register Notice, Volume 79, No. 9 - Jan. 14, 2014 Application to Export Electric Energy OE Docket No. EA-390 Global Pure Energy, LLC.: Federal Register Notice,...

  14. Application to Export Electric Energy OE Docket No. EA-401 Lonestar...

    Energy Savers [EERE]

    Federal Register Notice, Volume 79, No. 116 - June 17, 2014 Application to Export Electric Energy OE Docket No. EA-401 Lonestar Power Marketing LLC: Federal Register Notice, Volume...

  15. Application to Export Electric Energy OE Docket No. EA-306-A...

    Broader source: Energy.gov (indexed) [DOE]

    Solutions to esport electric energy to Canada. Federal Register Notice. Application to Export Electric Energy OE Docket No. EA-3060-A MAG Energy Solutions, Federal Register Notice...

  16. Application to Export Electric Energy OE Docket No. EA-257-D...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    : Federal Register Notice, Volume 79, No. 43 - March 5, 2014 Application to Export Electric Energy OE Docket No. EA-257-D Emera Energy Services, Inc.: Federal Register Notice,...

  17. Application for Presidential Permit OE Docket No. PP-230-4 Internation...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Filing: Federal Register Notice Volume 76, No. 164 - Aug. 24, 2011 Application for Presidential Permit OE Docket No. PP-230-4 International Transmission Company - Notice of...

  18. Application for presidential permit OE Docket No. PP-230-4 Internation...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Federal Register Notice Volume 74, No. 26 - Feb. 10, 2009 Application for presidential permit OE Docket No. PP-230-4 International Transmission Company: Federal Register Notice...

  19. Trends in Energy Management Technology - Part 4: Review ofAdvanced Applications in Energy Management, Control, and InformationSystems

    SciTech Connect (OSTI)

    Yee, Gaymond; Webster, Tom

    2003-08-01T23:59:59.000Z

    In this article, the fourth in a series, we provide a review of advanced applications in Energy Management, Control, and Information Systems (EMCIS). The available features for these products are summarized and analyzed with regard to emerging trends in EMCIS and potential benefits to the Federal sector. The first article [1] covered enabling technologies for emerging energy management systems. The second article [2] serves as a basic reference for building control system (BCS) networking fundamentals and includes an assessment of current approaches to open communications. The third article [3] evaluated several products that exemplify the current state of practice in EMCIS. It is important for energy managers in the Federal sector to have a high level of knowledge and understanding of these complex energy management systems. This series of articles provides energy practitioners with some basic informational and educational tools to help make decisions relative to energy management systems design, specification, procurement, and energy savings potential.

  20. Advanced finite-element methods for design and analysis of nanooptical structures: Applications

    E-Print Network [OSTI]

    Burger, S; Pomplun, J; Blome, M; Schmidt, F; 10.1117/12.2001094

    2013-01-01T23:59:59.000Z

    An overview on recent applications of the finite-element method Maxwell-solver JCMsuite to simulation tasks in nanooptics is given. Numerical achievements in the fields of optical metamaterials, plasmonics, photonic crystal fibers, light emitting devices, solar cells, optical lithography, optical metrology, integrated optics, and photonic crystals are summarized.

  1. Studies of space-charge physics in beams for advanced accelerator applications

    SciTech Connect (OSTI)

    Wang, J. G.; Bernal, S.; Chin, P.; Kishek, R. A.; Li, Y.; Reiser, M.; Venturini, M.; Zhang, W. W.; Zou, Y.; Godlove, T.; Kehne, D.; Haber, I.; York, R. C. [Institute for Plasma Research, University of Maryland, College Park, Maryland 20742 (United States); FM Technologies, Fairfax, Virginia 22032 (United States); Naval Research Laboratory, Washington, District of Columbia 20375 (United States); NSCL, Michigan State University, East Lansing, Michigan 48824 (United States)

    1998-11-05T23:59:59.000Z

    We review experimental observations of space-charge effects and collective phenomena in charged particle beams for accelerator applications. These include halo formation and emittance growth, bunch profile evolution, space-charge waves, and longitudinal instabilities. We also report on the development of the University of Maryland Electron Ring for the study of space-charge physics in a circular lattice.

  2. Electricity Advisory Committee - Federal Register Notices | Department...

    Energy Savers [EERE]

    Federal Register Notices Electricity Advisory Committee - Federal Register Notices Electricity Advisory Committee - Federal Register Notices February 17, 2015 Electricity Advisory...

  3. Advanced thermoelectric materials and systems for automotive applications in the next millennium

    SciTech Connect (OSTI)

    Morelli, D.T.

    1997-07-01T23:59:59.000Z

    A combination of environmental, economic, and technological drivers has led to a reassessment of the potential for using thermoelectric devices in several automotive applications. In order for this technology to achieve its ultimate potential, new materials with enhanced thermoelectric properties are required. Experimental results on the fundamental physical properties of some new thermoelectric materials, including filled skutterudites and 1-1-1 intermetallic semiconductors, are presented.

  4. Recent advances in fabrication of high-T{sub c} superconductors for electric power applications.

    SciTech Connect (OSTI)

    Balachandran, U.

    1998-03-25T23:59:59.000Z

    The U.S. Department of Energy (DOE) supports an applied superconductivity program entitled ''Superconductivity Program for Electric Power Systems.'' Activities within this program contribute to development of the high-temperature superconductor (HTS) technology needed for industry to proceed with the commercial development of electric power applications such as motors, generators, transformers, transmission cables, and current limiters. Research is conducted in three categories: wire development, systems technology development, and Superconductivity Partnership Initiative (SPI). Wire development activities are devoted to improving the critical current density (J{sub c}) of short-length HTS wires, whereas systems technology development focuses on fabrication of long-length wires, coils, and on magnets. The SPI activities are aimed at development of prototype products. Significant progress has been made in the development of (HTSs) for various applications: some applications have already made significant strides in the marketplace, while others are still in the developmental stages. For successful electric power applications, it is very important that the HTS be fabricated into long-length conductors that exhibit desired superconducting and mechanical properties. Several parameters of the PIT technique must be carefully controlled to obtain the desired properties. Long lengths of Bi-2223 tapes with respectable superconducting properties have been fabricated by a carefully designed thermomechanical treatment process. A 1-MVA capacity fault current limiter, a 286-hp motor, and 630-kVA transformers, and a 50-m-long conductor, all using HTSs, have already been demonstrated. While the use of HTS devices in the electric utility area has clear advantages, impediments to successful commercialization remain. Issues such as AC losses, conductor cost, and reliable superconducting joints must be addressed. The cost of HTS conductors are still quite high, and significant R and D effort must be focused on this issue. The general acceptance of HTS power equipment will ultimately be based on system performance, reliability and maintenance, efficiency, and installed cost relative to those of conventional technologies.

  5. Studies of space-charge physics in beams for advanced accelerator applications

    SciTech Connect (OSTI)

    Wang, J.G.; Bernal, S.; Chin, P.; Kishek, R.A.; Li, Y.; Reiser, M.; Venturini, M.; Zhang, W.W.; Zou, Y. [Institute for Plasma Research, University of Maryland, College Park, Maryland 20742 (United States); Godlove, T.; Kehne, D. [FM Technologies, Fairfax, Virginia 22032 (United States); Haber, I. [Naval Research Laboratory, Washington, District of Columbia 20375 (United States); York, R.C. [NSCL, Michigan State University, East Lansing, Michigan 48824 (United States)

    1998-11-01T23:59:59.000Z

    We review experimental observations of space-charge effects and collective phenomena in charged particle beams for accelerator applications. These include halo formation and emittance growth, bunch profile evolution, space-charge waves, and longitudinal instabilities. We also report on the development of the University of Maryland Electron Ring for the study of space-charge physics in a circular lattice. {copyright} {ital 1998 American Institute of Physics.}

  6. Assessment of instrumentation needs for advanced coal power plant applications: Final report

    SciTech Connect (OSTI)

    Nelson, E.T.; Fischer, W.H.; Lipka, J.V.; Rutkowski, M.D.; Zaharchuk, R.

    1987-10-01T23:59:59.000Z

    The purpose of this study was to identify contaminants, identify instrumentation needs, assess available instrumentation and identify instruments that should be developed for controlling and monitoring gas streams encountered in the following power plants: Integrated Gasification Combined Cycle, Pressurized Fluidized Bed Combustion, and Gasification Molten Carbonate Fuel Cell. Emphasis was placed on hot gas cleanup system gas stream analysis, and included process control, research and environmental monitoring needs. Commercial process analyzers, typical of those currently used for process control purposes, were reviewed for the purpose of indicating commercial status. No instrument selection guidelines were found which were capable of replacing user interaction with the process analyzer vendors. This study leads to the following conclusions: available process analyzers for coal-derived gas cleanup applications satisfy current power system process control and regulatory requirements, but they are troublesome to maintain; commercial gas conditioning systems and in situ analyzers continue to be unavailable for hot gas cleanup applications; many research-oriented gas stream characterization and toxicity assessment needs can not be met by commercially available process analyzers; and greater emphasis should be placed on instrumentation and control system planning for future power plant applications. Analyzers for specific compounds are not recommended other than those needed for current process control purposes. Instead, some generally useful on-line laser-based and inductively coupled plasma methods are recommended for further development because of their potential for use in present hot gas cleanup research and future optimization, component protection and regulation compliance activities. 48 refs., 21 figs., 26 tabs.

  7. Performance Characteristics Of An Intensity Modulated Advanced X-Ray Source (IMAXS) For Homeland Security Applications

    SciTech Connect (OSTI)

    Langeveld, Willem G. J.; Brown, Craig; Condron, Cathie; Ingle, Mike [Rapiscan Laboratories, Inc., 520 Almanor Ave., Sunnyvale, CA 94085 (United States); Christensen, Phil A.; Johnson, William A.; Owen, Roger D. [HESCO/PTSE Inc., 2501 Monarch St., Alameda, CA 94501 (United States); Hernandez, Michael; Schonberg, Russell G. [XScell Corp., 2134 Old Middlefield Way, Mountain View, CA 94043 (United States); Ross, Randy [Stangenes Industries, Inc., 1052 East Meadow Circle, Palo Alto, CA 94303 (United States)

    2011-06-01T23:59:59.000Z

    X-ray cargo inspection systems for the detection and verification of threats and contraband must address stringent, competitive performance requirements. High x-ray intensity is needed to penetrate dense cargo, while low intensity is desirable to minimize the radiation footprint, i.e. the size of the controlled area, required shielding and the dose to personnel. In a collaborative effort between HESCO/PTSE Inc., XScell Corp., Stangenes Industries, Inc. and Rapiscan Laboratories, Inc., an Intensity Modulated Advanced X-ray Source (IMAXS) was designed and produced. Cargo inspection systems utilizing such a source have been projected to achieve up to 2 inches steel-equivalent greater penetration capability, while on average producing the same or smaller radiation footprint as present fixed-intensity sources. Alternatively, the design can be used to obtain the same penetration capability as with conventional sources, but reducing the radiation footprint by about a factor of three. The key idea is to anticipate the needed intensity for each x-ray pulse by evaluating signal strength in the cargo inspection system detector array for the previous pulse. The IMAXS is therefore capable of changing intensity from one pulse to the next by an electronic signal provided by electronics inside the cargo inspection system detector array, which determine the required source intensity for the next pulse. We report on the completion of a 9 MV S-band (2998 MHz) IMAXS source and comment on its performance.

  8. Outdoor testing of advanced optical materials for solar thermal electric applications

    SciTech Connect (OSTI)

    Wendelin, T.J.; Jorgensen, G.; Goggin, R.M.

    1992-05-01T23:59:59.000Z

    The development of low-cost, durable advanced optical materials is an important element in making solar energy viable for electricity production. It is important to determine the expected lifetime of candidate reflector materials in real-world service conditions. The demonstration of the optical durability of such materials in outdoor environments is critical to the successful commercialization of solar thermal electric technologies. For many years optical performance data have been collected and analyzed by the National Renewable Energy Laboratory (NREL) for candidate reflector materials subjected to simulated outdoor exposure conditions. Much of this testing is accelerated in order to predict service durability. Some outdoor testing has occurred but not in a systematic manner. To date, simulated/accelerated testing has been limited correlation with actual outdoor exposure testing. Such a correlation is desirable to provide confidence in lifetime predictions based upon accelerated weathering methods. To obtain outdoor exposure data for realistic environments and to establish a data base for correlating simulated/accelerated outdoor exposure data with actual outdoor exposure data, the development of an expanded outdoor testing program has recently been initiated by NREL. Several outdoor test sites will be selected based on the solar climate, potential for solar energy utilization by industry, and cost of installation. Test results are site dependent because exposure conditions vary with geographical location. The importance of this program to optical materials development is outlined, and the process used to determine and establish the outdoor test sites is described. Candidate material identification and selection is also discussed. 10 refs.

  9. GaSb substrates with extended IR wavelength for advanced space based applications

    SciTech Connect (OSTI)

    Allen, Lisa P.; Flint, Patrick; Dallas, Gordon; Bakken, Daniel; Blanchat, Kevin; Brown, Gail J.; Vangala, Shivashankar R.; Goodhue, William D.; Krishnaswami, Kannan

    2009-05-01T23:59:59.000Z

    GaSb substrates have advantages that make them attractive for implementation of a wide range of infrared (IR) detectors with higher operating temperatures for stealth and space based applications. A significant aspect that would enable widespread commercial application of GaSb wafers for very long wavelength IR (VLWIR) applications is the capability for transmissivity beyond 15 m. Due largely to the GaSb (antisite) defect and other point defects in undoped GaSb substrates, intrinsic GaSb is still slightly p-type and strongly absorbs in the VLWIR. This requires backside thinning of the GaSb substrate for IR transmissivity. An extremely low n-type GaSb substrate is preferred to eliminate thinning and provide a substrate solution for backside illuminated VLWIR devices. By providing a more homogeneous radial distribution of the melt solute to suppress GaSb formation and controlling the cooling rate, ultra low doped n:GaSb has been achieved. This study examines the surface properties and IR transmission spectra of ultra low doped GaSb substrates at both room and low temperatures. Atomic force microscopy (AFM), homoepitaxy by MBE, and infrared Fourier transform (FTIR) analysis was implemented to examine material quality. As compared with standard low doped GaSb, the ultra low doped substrates show over 50% transmission and consistent wavelength transparency past 23 m with improved %T at low temperature. Homoepitaxy and AFM results indicate the ultra low doped GaSb has a low thermal desorbtion character and qualified morphology. In summary, improvements in room temperature IR transmission and extended wavelength characteristics have been shown consistently for ultra low doped n:GaSb substrates.

  10. Analysis of Advanced Actinide-Fueled Energy Systems for Deep Space Propulsion Applications

    E-Print Network [OSTI]

    Guy, Troy Lamar

    2011-02-22T23:59:59.000Z

    in our solar system and in exosolar applications. Investigation of interstellar space regions have yet to be achieved beyond 200 astronomical units (AU), where one AU is the average distance between Earth and the Sun (approximately 150 million km... with Kiwi-B4E. A second series of reactors developed in the 1960's under the ROVER program were known as the Phoebus series. The Phoebus 1 reactor was designed for up to 2.2 x 105 N of thrust and 1500 MW power. Phoebus 2A was designed for up to 5000 MW...

  11. Advanced Artificial Science. The development of an artificial science and engineering research infrastructure to facilitate innovative computational modeling, analysis, and application to interdisciplinary areas of scientific investigation.

    SciTech Connect (OSTI)

    Saffer, Shelley (Sam) I.

    2014-12-01T23:59:59.000Z

    This is a final report of the DOE award DE-SC0001132, Advanced Artificial Science. The development of an artificial science and engineering research infrastructure to facilitate innovative computational modeling, analysis, and application to interdisciplinary areas of scientific investigation. This document describes the achievements of the goals, and resulting research made possible by this award.

  12. APAC'03 on Advanced Computing, Grid Applications and eResearch Gold Coast, Australia, 29th Sep2nd Oct 2003

    E-Print Network [OSTI]

    Phipps, Steven J.

    , Hobart, Australia 2 CSIRO Marine Research, Hobart, Australia 1 #12;incoming solar radiation [Ebert et al., 1995] and consequently reduces the absorption of solar energy into the upper ocean. The thermodynamicAPAC'03 on Advanced Computing, Grid Applications and eResearch Gold Coast, Australia, 29th Sep­2nd

  13. Huang and Nicol Journal of Cloud Computing: Advances, Systems and Applications 2013, 2:9 http://www.journalofcloudcomputing.com/content/2/1/9

    E-Print Network [OSTI]

    Chen, Ing-Ray

    Huang and Nicol Journal of Cloud Computing: Advances, Systems and Applications 2013, 2:9 http://www.journalofcloudcomputing.com/content/2/1/9 RESEARCH Open Access Trust mechanisms for cloud computing Jingwei Huang* and David M Nicol Abstract Trust is a critical factor in cloud computing; in present practice it depends largely

  14. Modular Inverter for Advanced Control Applications In the fall of 2003, a team of graduate students was assembled to design and construct a

    E-Print Network [OSTI]

    Kimball, Jonathan W.

    Modular Inverter for Advanced Control Applications May 2006 In the fall of 2003, a team of graduate necessary functionality. #12;Modular Inverter System Specification Specification Document Issue 002 SD00004 students was assembled to design and construct a research-grade inverter. The goal was to have available

  15. Industry and the APS | Advanced Photon Source

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    important applications, including advances in manufacturing, information technology, nanotechnology, pharmaceuticals, biomedicine, oil and gas, transportation, agriculture,...

  16. Reference: RGL 83-04 Subject: PUBLIC NOTICE-AGRICULTURE

    E-Print Network [OSTI]

    US Army Corps of Engineers

    Reference: RGL 83-04 Subject: PUBLIC NOTICE-AGRICULTURE Title: DISTRIBUTION OF PUBLIC NOTICES FOR ACTIVITIES INVOLVING AGRICULTURAL CONVERSIONS Issued: 03/04/83 Expires: 12/31/85 Originator: DAEN AGRICULTURAL USE OF LAND. 1. If an applicant's proposal involves the conversion of land so as to increase

  17. EIS-0463: Amended Notice of Intent To Modify the Scope of the...

    Energy Savers [EERE]

    Scoping Meetings, Notice of Floodplains and Wetlands Involvement Department of Energy - Presidential Permit Application for Northern Pass Transmission, New Hampshire DOE...

  18. Zimbra Web Client User Guide Advanced Web Client

    E-Print Network [OSTI]

    Zimbra Web Client User Guide Advanced Web Client Release 7.2 #12;Legal Notices Copyright ©2005 Table of Contents Table of Contents 1 Getting Started with the Zimbra Web Client Zimbra Web Client Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Browser

  19. Comprehensive report to Congress: Proposals received in response to the Clean Coal Technology V Program Opportunity Notice

    SciTech Connect (OSTI)

    Not Available

    1993-06-01T23:59:59.000Z

    This report is a comprehensive overview of all proposals received and the projects that were selected in response to the Program Opportunity Notice (PON) for the Clean Coal Technology V (CCT-V) Demonstration Projects (solicitation number DE-PS01-92FE62647). The Department of Energy (DOE) issued the solicitation on July 6, 1992. Through this PON, DOE solicited proposals to conduct cost-shared Clean Coal Technology (CCT) projects that advance significantly the efficiency and environmental performance of coal-using technologies and that are applicable to either new or existing facilities.

  20. EPA's Recent Advance Notice on Greenhouse Gases

    Broader source: Energy.gov (indexed) [DOE]

    authority for EPA to address air Provides statutory authority for EPA to address air pollution from mobile sources and mobile source fuels pollution from mobile sources...

  1. Atmospheric fluidized bed combustion advanced system concepts applicable to small industrial and commercial markets. Topical report, Level 2

    SciTech Connect (OSTI)

    Ake, T.R.; Dixit, V.B.; Mongeon, R.K.

    1992-09-01T23:59:59.000Z

    As part of an overall strategy to promote FBC coal combustion and to improve the marketability of the eastern coals, the US Department of Energy`s Morgantown Energy Research Center awarded a three level contract to Riley Stoker Corporation to develop advanced Multi Solids Fluidized Bed (MSFB) boiler designs. The first level of this contract targeted the small package boiler (10,000--50,000 lb/hr steam) and industrial size boiler (75,000--150,000 lb/hr steam) markets. Two representative sizes, 30,000 lb/hr and 110,000 lb/hr of steam, were selected for the two categories for a detailed technical and economic evaluation. Technically, both the designs showed promise, however, the advanced industrial design was favored on economic considerations. It was thus selected for further study in the second level of the contract. Results of this Level-2 effort, presented in this report, consisted of testing the design concept in Riley`s 4.4 MBtu/hr pilot MSFB facility located at Riley Research Center in Worcester, Mass. The design and economics of the proof of concept facility developed in Level-1 of the contract were then revised in accordance with the findings of the pilot test program. A host site for commercial demonstration in Level-3 of the contract was also secured. It was determined that co-firing coal in combination with paper de-inking sludge will broaden the applicability of the design beyond conventional markets. International Paper (IP), the largest paper company in the world, is willing to participate in this part of the program. IP has offered its Hammermill operation at Lockhaven, Pa, site of a future paper de-inking plant, for the proof of concept installation. This plant will go in operation in 1994. It is recommended that METC proceed to the commercial demonstration of the design developed. The approach necessary to satisfy the needs of the customer while meeting the objectives of this program is presented along with a recommended plan of action.

  2. Vehicle Technologies Office Merit Review 2015: Development of Advanced High-Performance Batteries for 12V Start Stop Vehicle Applications

    Broader source: Energy.gov [DOE]

    Presentation given by Maxwell at 2015 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about development of advanced high...

  3. Vehicle Technologies Office Merit Review 2014: Advancement in Fuel Spray and Combustion Modeling for Compression Ignition Engine Applications

    Broader source: Energy.gov [DOE]

    Presentation given by Argonne National Laboratory at 2014 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about advancement in...

  4. EIS-0391: DOE Notice of Availability of a Final Environmental...

    Broader source: Energy.gov (indexed) [DOE]

    IS-0391-FEIS-DOENOA-2012.pdf More Documents & Publications Application to Export Electric Energy OE Docket No. EA-387 Energia Renovable S.C., LLC: Federal Register Notice, Volume...

  5. NOTICE OF FACULTY VACANCY IN ART EDUCATION The Lamar Dodd School of Art at The University of Georgia invites applications for the

    E-Print Network [OSTI]

    Arnold, Jonathan

    NOTICE OF FACULTY VACANCY IN ART EDUCATION The Lamar Dodd School of Art at The University Education Search Committee Lamar Dodd School of Art The University of Georgia 270 River Rd. Athens, Ga in regard to both outdoor and urban activities (www.exploregeorgia.org). The Lamar Dodd School of Art

  6. UNIVERSITY OF MICHIGAN NONDISCRIMINATION POLICY NOTICE The University of Michigan, as an equal opportunity/affirmative action employer, complies with all applicable federal and

    E-Print Network [OSTI]

    Michigan, University of

    UNIVERSITY OF MICHIGAN NONDISCRIMINATION POLICY NOTICE The University of Michigan, as an equal nondiscrimination and affirmative action. The University of Michigan is committed to a policy of equal opportunity Coordinator, Office of Institutional Equity, 2072 Administrative Services Building, Ann Arbor, Michigan 48109

  7. Advanced Computational Methods for Turbulence and Combustion...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Advanced Computational Methods for Turbulence and Combustion Advanced Computational Methods for Turbulence and Combustion Bell.png Key Challenges: Development and application of...

  8. Engineering development of advanced physical fine coal cleaning for premium fuel applications. Quarterly technical progress report 16, July--September, 1996

    SciTech Connect (OSTI)

    Shields, G.L.; Moro, N.; Smit, F.J.; Jha, M.C.

    1996-10-30T23:59:59.000Z

    The primary goal of this project is the engineering development of two advanced physical fine coal cleaning processes, column flotation and selective agglomeration, for premium fuel applications. The project scope includes laboratory research and bench-scale testing on six coals to optimize these processes, followed by the design, construction, and operation of a 2-t/hr process development unit (PDU). The project began in October, 1992, and is scheduled for completion by September 1997. 28 refs., 13 figs., 19 tabs.

  9. Application of USNRC NUREG/CR-6661 and draft DG-1108 to evolutionary and advanced reactor designs

    SciTech Connect (OSTI)

    Chang 'Apollo', Chen [Apollo Consulting, Inc., Surprise, AZ 85374-4605 (United States)

    2006-07-01T23:59:59.000Z

    For the seismic design of evolutionary and advanced nuclear reactor power plants, there are definite financial advantages in the application of USNRC NUREG/CR-6661 and draft Regulatory Guide DG-1108. NUREG/CR-6661, 'Benchmark Program for the Evaluation of Methods to Analyze Non-Classically Damped Coupled Systems', was by Brookhaven National Laboratory (BNL) for the USNRC, and Draft Regulatory Guide DG-1108 is the proposed revision to the current Regulatory Guide (RG) 1.92, Revision 1, 'Combining Modal Responses and Spatial Components in Seismic Response Analysis'. The draft Regulatory Guide DG-1108 is available at http://members.cox.net/apolloconsulting, which also provides a link to the USNRC ADAMS site to search for NUREG/CR-6661 in text file or image file. The draft Regulatory Guide DG-1108 removes unnecessary conservatism in the modal combinations for closely spaced modes in seismic response spectrum analysis. Its application will be very helpful in coupled seismic analysis for structures and heavy equipment to reduce seismic responses and in piping system seismic design. In the NUREG/CR-6661 benchmark program, which investigated coupled seismic analysis of structures and equipment or piping systems with different damping values, three of the four participants applied the complex mode solution method to handle different damping values for structures, equipment, and piping systems. The fourth participant applied the classical normal mode method with equivalent weighted damping values to handle differences in structural, equipment, and piping system damping values. Coupled analysis will reduce the equipment responses when equipment, or piping system and structure are in or close to resonance. However, this reduction in responses occurs only if the realistic DG-1108 modal response combination method is applied, because closely spaced modes will be produced when structure and equipment or piping systems are in or close to resonance. Otherwise, the conservatism in the current Regulatory Guide 1.92, Revision 1, will overshadow the advantage of coupled analysis. All four participants applied the realistic modal combination method of DG-1108. Consequently, more realistic and reduced responses were obtained. (authors)

  10. USABC Development of Advanced High-Performance Batteries for...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Development of Advanced High-Performance Batteries for EV Applications USABC Development of Advanced High-Performance Batteries for EV Applications 2012 DOE Hydrogen and Fuel Cells...

  11. Advanced Materials and Processing of Composites for High Volume...

    Broader source: Energy.gov (indexed) [DOE]

    Advanced Materials and Processing of Composites for High Volume Applications Advanced Materials and Processing of Composites for High Volume Applications 2011 DOE Hydrogen and Fuel...

  12. Vehicle Technologies Office Merit Review 2014: Advanced High Energy Li-Ion Cell for PHEV and EV Applications

    Broader source: Energy.gov [DOE]

    Presentation given by 3M at 2014 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about advanced high energy Li-ion cell for PHEV...

  13. Vehicle Technologies Office Merit Review 2014: ICME Guided Development of Advanced Cast Aluminum Alloys For Automotive Engine Applications

    Broader source: Energy.gov [DOE]

    Presentation given by Ford at 2014 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about ICME guided development of advanced cast...

  14. Required Annual Notices

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Required Annual Notices The Women's Health and Cancer Rights Act of 1998 (WHCRA) The medical programs sponsored by LANS will not restrict benefits if you or your dependent...

  15. Required Annual Notices

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Annual Notices The Women's Health and Cancer Rights Act of 1998 (WHCRA) The medical programs sponsored by LANS will not restrict benefits if you or your dependent receives...

  16. Federal Register Notices | Department of Energy

    Office of Environmental Management (EM)

    Information Center Library Federal Register Notices Federal Register Notices May 22, 2015 Electricity Advisory Committee Notice of Open Meeting June 29 and 30, 2015: Federal...

  17. Application of Robust Design and Advanced Computer Aided Engineering Technologies: Cooperative Research and Development Final Report, CRADA Number CRD-04-143

    SciTech Connect (OSTI)

    Thornton, M.

    2013-06-01T23:59:59.000Z

    Oshkosh Corporation (OSK) is taking an aggressive approach to implementing advanced technologies, including hybrid electric vehicle (HEV) technology, throughout their commercial and military product lines. These technologies have important implications for OSK's commercial and military customers, including fleet fuel efficiency, quiet operational modes, additional on-board electric capabilities, and lower thermal signature operation. However, technical challenges exist with selecting the optimal HEV components and design to work within the performance and packaging constraints of specific vehicle applications. SK desires to use unique expertise developed at the Department of Energy?s (DOE) National Renewable Energy Laboratory (NREL), including HEV modeling and simulation. These tools will be used to overcome technical hurdles to implementing advanced heavy vehicle technology that meet performance requirements while improving fuel efficiency.

  18. Application of Reservoir Characterization and Advanced Technology to Improve Recovery and Economics in a Lower Quality Shallow Shelf Carbonate Reservoir

    SciTech Connect (OSTI)

    Taylor, Archie R.

    1996-07-01T23:59:59.000Z

    The Class 2 Project at West Welch was designed to demonstrate the use of advanced technologies to enhance the economics of improved oil recovery (IOR) projects in lower quality Shallow Shelf Carbonate (SSC) reservoirs, resulting in recovery of additional oil that would otherwise be left in the reservoir at project abandonment. Accurate reservoir description is critical to the effective evaluation and efficient design of IOR projects in the heterogeneous SSC reservoirs. Therefore, the majority of Budget Period 1 was devoted to reservoir characterization. Technologies being demonstrated include: (1) Advanced petrophysics; (2) Three dimensional (3-D) seismic; (3) Cross-well bore tomography; (4) Advanced reservoir simulation; (5) Carbon dioxide (CO{sub 2}) stimulation treatments; (6) Hydraulic fracturing design and monitoring; and (7) Mobility control agents.

  19. APPLICATION OF RESERVOIR CHARACTERIZATION AND ADVANCED TECHNOLOGY TO IMPROVE RECOVERY AND ECONOMICS IN A LOWER QUALITY SHALLOW SHELF SANANDRES RESERVOIR

    SciTech Connect (OSTI)

    Unknown

    2003-01-15T23:59:59.000Z

    The Class 2 Project at West Welch was designed to demonstrate the use of advanced technologies to enhance the economics of improved oil recovery (IOR) projects in lower quality Shallow Shelf Carbonate (SSC) reservoirs, resulting in recovery of additional oil that would otherwise be left in the reservoir at project abandonment. Accurate reservoir description is critical to the effective evaluation and efficient design of IOR projects in the heterogeneous SSC reservoirs. Therefore, the majority of Budget Period 1 was devoted to reservoir characterization. Technologies being demonstrated include: (1) Advanced petrophysics; (2) Three-dimensional (3-D) seismic; (3) Crosswell bore tomography; (4) Advanced reservoir simulation; (5) Carbon dioxide (CO{sub 2}) stimulation treatments; (6) Hydraulic fracturing design and monitoring; (7) Mobility control agents.

  20. Report on the workshop "Decay spectroscopy at CARIBU: advanced fuel cycle applications, nuclear structure and astrophysics". 14-16 April 2011, Argonne National Laboratory, USA.

    SciTech Connect (OSTI)

    Kondev, F.; Carpenter, M.P.; Chowdhury, P.; Clark, J.A.; Lister, C.J.; Nichols, A.L.; Swewryniak, D. (Nuclear Engineering Division); (Univ. of Massachusetts); (Univ. of Surrey)

    2011-10-06T23:59:59.000Z

    A workshop on 'Decay Spectroscopy at CARIBU: Advanced Fuel Cycle Applications, Nuclear Structure and Astrophysics' will be held at Argonne National Laboratory on April 14-16, 2011. The aim of the workshop is to discuss opportunities for decay studies at the Californium Rare Isotope Breeder Upgrade (CARIBU) of the ATLAS facility with emphasis on advanced fuel cycle (AFC) applications, nuclear structure and astrophysics research. The workshop will consist of review and contributed talks. Presentations by members of the local groups, outlining the status of relevant in-house projects and availabile equipment, will also be organized. time will also be set aside to discuss and develop working collaborations for future decay studies at CARIBU. Topics of interest include: (1) Decay data of relevance to AFC applications with emphasis on reactor decay heat; (2) Discrete high-resolution gamma-ray spectroscopy following radioactive decya and related topics; (3) Calorimetric studies of neutron-rich fission framgents using Total ABsorption Gamma-Ray Spectrometry (TAGS) technique; (4) Beta-delayed neutron emissions and related topics; and (5) Decay data needs for nuclear astrophysics.

  1. Collaboration Suite Advanced Web Client User Guide

    E-Print Network [OSTI]

    Shepp, Larry

    ZimbraTM Collaboration Suite Advanced Web Client User Guide Version 5.0 #12;Zimbra Web Client User Guide Copyright Notice Copyright © 2008 Zimbra, Inc. All rights reserved materials, onscreen publication, or Web documentation--is expressly forbidden. Zimbra and the Zimbra logo

  2. Application for Presidential Permit OE Docket No. PP-395 Emera...

    Office of Environmental Management (EM)

    Maine: Federal Register Notice, Volume 79, No. 81 - April 28, 2014 Application for Presidential Permit OE Docket No. PP-395 Emera Maine: Federal Register Notice, Volume 79, No. 81...

  3. Application for Presidential Permit OE Docket No. PP-397 Emera...

    Energy Savers [EERE]

    Maine: Federal Register Notice, Volume 79, No. 81 - April 28, 2014 Application for Presidential Permit OE Docket No. PP-397 Emera Maine: Federal Register Notice, Volume 79, No. 81...

  4. Application for Presidential Permit OE Docket No. PP-394 Emera...

    Office of Environmental Management (EM)

    Maine: Federal Register Notice, Volume 79, No. 81 - April 28, 2014 Application for Presidential Permit OE Docket No. PP-394 Emera Maine: Federal Register Notice, Volume 79, No. 81...

  5. Application for Presidential Permit OE Docket No. PP-396 Emera...

    Office of Environmental Management (EM)

    Maine: Federal Register Notice, Volume 79, No. 81 - April 28, 2014 Application for Presidential Permit OE Docket No. PP-396 Emera Maine: Federal Register Notice, Volume 79, No. 81...

  6. Evaluation of the applicability of existing nuclear power plant regulatory requirements in the U.S. to advanced small modular reactors.

    SciTech Connect (OSTI)

    LaChance, Jeffrey L.; Wheeler, Timothy A.; Farnum, Cathy Ottinger; Middleton, Bobby D.; Jordan, Sabina Erteza; Duran, Felicia Angelica; Baum, Gregory A.

    2013-05-01T23:59:59.000Z

    The current wave of small modular reactor (SMR) designs all have the goal of reducing the cost of management and operations. By optimizing the system, the goal is to make these power plants safer, cheaper to operate and maintain, and more secure. In particular, the reduction in plant staffing can result in significant cost savings. The introduction of advanced reactor designs and increased use of advanced automation technologies in existing nuclear power plants will likely change the roles, responsibilities, composition, and size of the crews required to control plant operations. Similarly, certain security staffing requirements for traditional operational nuclear power plants may not be appropriate or necessary for SMRs due to the simpler, safer and more automated design characteristics of SMRs. As a first step in a process to identify where regulatory requirements may be met with reduced staffing and therefore lower cost, this report identifies the regulatory requirements and associated guidance utilized in the licensing of existing reactors. The potential applicability of these regulations to advanced SMR designs is identified taking into account the unique features of these types of reactors.

  7. IMPROVEMENT OF WEAR COMPONENT'S PERFORMANCE BY UTILIZING ADVANCED MATERIALS AND NEW MANUFACTURING TECHNOLOGIES: CASTCON PROCESS FOR MINING APPLICATIONS

    SciTech Connect (OSTI)

    Xiaodi Huang; Richard Gertsch

    2005-02-04T23:59:59.000Z

    Michigan Technological University, together with The Robbins Group, Advanced Ceramic Research, Advanced Ceramic Manufacturing, and Superior Rock Bits, evaluated a new process and a new material for producing drill bit inserts and disc cutters for the mining industry. Difficulties in the material preparation stage slowed the research initially. Prototype testing of the drill bit inserts showed that the new inserts did not perform up to the current state of the art. Due to difficulties in the prototype production of the disc cutters, the disc cutter was manufactured but not tested. Although much promising information was obtained as a result of this project, the objective of developing an effective means for producing rock drill bits and rock disc cutters that last longer, increase energy efficiency and penetration rate, and lower overall production cost was not met.

  8. Analytical and experimental evaluation of joining silicon carbide to silicon carbide and silicon nitride to silicon nitride for advanced heat engine applications Phase 2. Final report

    SciTech Connect (OSTI)

    Sundberg, G.J.; Vartabedian, A.M.; Wade, J.A.; White, C.S. [Norton Co., Northboro, MA (United States). Advanced Ceramics Div.

    1994-10-01T23:59:59.000Z

    The purpose of joining, Phase 2 was to develop joining technologies for HIP`ed Si{sub 3}N{sub 4} with 4wt% Y{sub 2}O{sub 3} (NCX-5101) and for a siliconized SiC (NT230) for various geometries including: butt joins, curved joins and shaft to disk joins. In addition, more extensive mechanical characterization of silicon nitride joins to enhance the predictive capabilities of the analytical/numerical models for structural components in advanced heat engines was provided. Mechanical evaluation were performed by: flexure strength at 22 C and 1,370 C, stress rupture at 1,370 C, high temperature creep, 22 C tensile testing and spin tests. While the silicon nitride joins were produced with sufficient integrity for many applications, the lower join strength would limit its use in the more severe structural applications. Thus, the silicon carbide join quality was deemed unsatisfactory to advance to more complex, curved geometries. The silicon carbide joining methods covered within this contract, although not entirely successful, have emphasized the need to focus future efforts upon ways to obtain a homogeneous, well sintered parent/join interface prior to siliconization. In conclusion, the improved definition of the silicon carbide joining problem obtained by efforts during this contract have provided avenues for future work that could successfully obtain heat engine quality joins.

  9. SB 4 Interim Well Stimulation Treatment Regulations Notice of Proposed Emergency Rulemaking Action

    E-Print Network [OSTI]

    . DIVISION OF OIL, GAS, AND GEOTHERMAL RESOURCES Notice Published December 11, 2013 NOTICE IS HEREBY GIVEN of Oil, Gas and Geothermal Resources to conduct well stimulation treatment. The permit application must RULEMAKING ACTION REGARDING TITLE 14. NATURAL RESOURCES DIVISION 2. DEPARTMENT OF CONSERVATION CHAPTER 4

  10. Analytical and experimental evaluation of joining silicon nitride to metal and silicon carbide to metal for advanced heat engine applications. Final report

    SciTech Connect (OSTI)

    Kang, S.; Selverian, J.H.; O`Neil, D.; Kim, H. [GTE Labs., Inc., Waltham, MA (US); Kim, K. [Brown Univ., Providence, RI (US). Div. of Engineering

    1993-05-01T23:59:59.000Z

    This report summarizes the results of Phase 2 of Analytical and Experimental Evaluation of Joining Silicon Nitride to Metal and Silicon Carbide to Metal for Advanced Heat Engine Applications. A general methodology was developed to optimize the joint geometry and material systems for 650{degrees}C applications. Failure criteria were derived to predict the fracture of the braze and ceramic. Extensive finite element analyses (FEA) were performed to examine various joint geometries and to evaluate the affect of different interlayers on the residual stress state. Also, material systems composed of coating materials, interlayers, and braze alloys were developed for the program based on the chemical stability and strength of the joints during processing, and service. The FEA results were compared with experiments using two methods: (1) an idealized strength relationship of the ceramic, and (2) a probabilistic analysis of the ceramic strength (NASA CARES). The results showed that the measured strength of the joint reached 30--80% of the strength predicted by FEA. Also, potential high-temperature braze alloys were developed and evaluated for the high-temperature application of ceramic-metal joints. 38 tabs, 29 figs, 20 refs.

  11. Monte Carlo simulation of a Bonner sphere spectrometer for application to the determination of neutron field in the Experimental Advanced Superconducting Tokamak experimental hall

    SciTech Connect (OSTI)

    Hu, Z. M.; Xie, X. F.; Chen, Z. J.; Peng, X. Y.; Du, T. F.; Cui, Z. Q.; Ge, L. J.; Li, T.; Yuan, X.; Zhang, X.; Li, X. Q.; Zhang, G. H.; Chen, J. X.; Fan, T. S., E-mail: tsfan@pku.edu.cn [State Key Laboratory of Nuclear Physics and Technology, Peking University, Beijing 100871 (China); Hu, L. Q.; Zhong, G. Q.; Lin, S. Y.; Wan, B. N. [Institute of Plasma Physics, CAS, Hefei 230031 (China); Gorini, G. [Dipartimento di Fisica, Universitŕ di Milano-Bicocca, Milano 20126 (Italy); Istituto di Fisica del Plasma “P. Caldirola,” Milano 20126 (Italy)

    2014-11-15T23:59:59.000Z

    To assess the neutron energy spectra and the neutron dose for different positions around the Experimental Advanced Superconducting Tokamak (EAST) device, a Bonner Sphere Spectrometer (BSS) was developed at Peking University, with totally nine polyethylene spheres and a SP9 {sup 3}He counter. The response functions of the BSS were calculated by the Monte Carlo codes MCNP and GEANT4 with dedicated models, and good agreement was found between these two codes. A feasibility study was carried out with a simulated neutron energy spectrum around EAST, and the simulated “experimental” result of each sphere was obtained by calculating the response with MCNP, which used the simulated neutron energy spectrum as the input spectrum. With the deconvolution of the “experimental” measurement, the neutron energy spectrum was retrieved and compared with the preset one. Good consistence was found which offers confidence for the application of the BSS system for dose and spectrum measurements around a fusion device.

  12. advanced stability control: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Introduction In current robotic applications, advances in artificial intelligence and system to allow the advances in artificial intelligence to be applied to more environments....

  13. Advancement in Fuel Spray and Combustion Modeling for Compression...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Advancement in Fuel Spray and Combustion Modeling for Compression Ignition Engine Applications Advancement in Fuel Spray and Combustion Modeling for Compression Ignition Engine...

  14. advanced atpg flow: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    OPPORTUNITIES ADVANCE THE UNDERSTANDING OF AUTISM 12;Marcus Autism Center Adams, Mark 126 Advanced Review Emerging applications Biology and Medicine Websites Summary:...

  15. advanced 3d power: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

  16. aicd advanced: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

  17. advanced quantra fticr: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

  18. advanced power plant: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

  19. advanced nuclear reactor: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

  20. advanced nuclear plant: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

  1. advanced safety modeling: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

  2. abwr advanced boiling: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

  3. advanced nuclear power: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

  4. advanced computational model: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

  5. advanced pressurized reactor: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

  6. advanced metal-membrane technology-commercialization: Topics...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

  7. advanced boiling curve: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

  8. advanced thermal reactor: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

  9. advanced dynamic models: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

  10. advanced power group: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

  11. advanced power converters: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

  12. advanced reactor analyses: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

  13. advanced modeling technology: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

  14. advanced burner reactors: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

  15. advanced power train: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

  16. advanced fast reactor: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

  17. advanced water reactor: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

  18. applying advanced model: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

  19. areva advanced mox: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

  20. advanced nuclear plants: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

  1. advanced integrated modeling: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

  2. advanced integral reactor: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

  3. advanced cervix carcinoma: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

  4. advanced reactor study: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

  5. advanced power systems: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

  6. advanced development model: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

  7. advanced burner reactor: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

  8. advanced tca backplane: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

  9. advanced modeling tool: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

  10. advanced oropharyngeal carcinoma: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

  11. advanced unresectable rectal: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

  12. advanced diffusion model: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

  13. advanced steam plant: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

  14. advanced model based: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

  15. advanced reactors coupled: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

  16. advanced reactor instrumentation: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

  17. advanced vulvar carcinomas: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

  18. advanced maxillary sinus: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

  19. advanced epidermoid carcinoma: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

  20. advanced nsclc patients: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

  1. advanced hypopharyngeal carcinoma: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

  2. advanced reactor mixed: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

  3. advanced utility simulation: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

  4. advanced intrahepatic cholangiocarcinoma: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

  5. advanced power sources: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

  6. advanced boiling water: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

  7. advanced large power: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

  8. advanced reactors transition: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

  9. advanced radioisotope power: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

  10. advanced steam plants: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

  11. advanced hanaro reactor: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

  12. advanced candu reactor: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

  13. advanced vectorial simulation: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

  14. advanced power production: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

  15. advanced power reactor: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

  16. advanced melanoma results: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

  17. advanced reactor development: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

  18. advanced passive plant: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

  19. analysis advanced simulation: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

  20. advanced hippotherapy simulator: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

  1. advanced power plants: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

  2. advanced model approaches: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

  3. advanced nuclear reactors: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

  4. advanced astroculture plant: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

  5. advanced orthotopic hepatocellular: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

  6. advanced nasopharyngeal carcinoma: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

  7. advanced thermal reactor fugen: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

  8. advanced coolside sorbent: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

  9. advanced power system: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

  10. advanced computational modeling: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

  11. advanced fimbrial ectopic: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

  12. advanced mixing models: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

  13. aries advanced power: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

  14. advanced instrumentation information: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of advance demand information on inventory systems with exoge- nous replenishment lead times Karaesmen, Fikri 18 An Information Food Chain for Advanced Applications on the...

  15. advanced information components: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of advance demand information on inventory systems with exoge- nous replenishment lead times Karaesmen, Fikri 9 An Information Food Chain for Advanced Applications on the...

  16. advanced server klasterdamise: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Next Page Last Page Topic Index 1 Advanced SQL Injection In SQL Server Applications Computer Technologies and Information Sciences Websites Summary: Advanced SQL Injection In SQL...

  17. 30 TAC, part 1, chapter 39, rule 39.418 Notice of Receipt of...

    Open Energy Info (EERE)

    Notice of Receipt of Application and Intent to Obtain Permit Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- RegulationRegulation: 30 TAC, part...

  18. 30 TAC, part 1, chapter 39, rule 39.603 Newspaper Notice for...

    Open Energy Info (EERE)

    Newspaper Notice for Air Quality Permit Applications Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- RegulationRegulation: 30 TAC, part 1,...

  19. Reactor physics methods, models, and applications used to support the conceptual design of the Advanced Neutron Source

    SciTech Connect (OSTI)

    Gehin, J.C.; Worley, B.A.; Renier, J.P. [Oak Ridge National Lab., TN (United States); Wemple, C.A.; Jahshan, S.N.; Ryskammp, J.M. [Idaho National Engineering Lab., Idaho Falls, ID (United States)

    1995-08-01T23:59:59.000Z

    This report summarizes the neutronics analysis performed during 1991 and 1992 in support of characterization of the conceptual design of the Advanced Neutron Source (ANS). The methods used in the analysis, parametric studies, and key results supporting the design and safety evaluations of the conceptual design are presented. The analysis approach used during the conceptual design phase followed the same approach used in early ANS evaluations: (1) a strong reliance on Monte Carlo theory for beginning-of-cycle reactor performance calculations and (2) a reliance on few-group diffusion theory for reactor fuel cycle analysis and for evaluation of reactor performance at specific time steps over the fuel cycle. The Monte Carlo analysis was carried out using the MCNP continuous-energy code, and the few- group diffusion theory calculations were performed using the VENTURE and PDQ code systems. The MCNP code was used primarily for its capability to model the reflector components in realistic geometries as well as the inherent circumvention of cross-section processing requirements and use of energy-collapsed cross sections. The MCNP code was used for evaluations of reflector component reactivity effects and of heat loads in these components. The code was also used as a benchmark comparison against the diffusion-theory estimates of key reactor parameters such as region fluxes, control rod worths, reactivity coefficients, and material worths. The VENTURE and PDQ codes were used to provide independent evaluations of burnup effects, power distributions, and small perturbation worths. The performance and safety calculations performed over the subject time period are summarized, and key results are provided. The key results include flux and power distributions over the fuel cycle, silicon production rates, fuel burnup rates, component reactivities, control rod worths, component heat loads, shutdown reactivity margins, reactivity coefficients, and isotope production rates.

  20. Application to Export Electric Energy OE Docket No. EA-410 CWP...

    Energy Savers [EERE]

    Energy: Federal Register Notice, Volume 80, No. 80 - April 27, 2015 Application to Export Electric Energy OE Docket No. EA-410 CWP Energy: Federal Register Notice, Volume 80, No....

  1. Application to Export Electric Energy OE Docket No. EA-384 NRG...

    Office of Environmental Management (EM)

    LLC: Federal Register Notice Volume 77, No. 38 - Feb. 27, 2012 Application to Export Electric Energy OE Docket No. EA-384 NRG Power Marketing LLC: Federal Register Notice Volume...

  2. Application to Export Electric Energy OE Docket No. EA-406 Sempra...

    Office of Environmental Management (EM)

    Notice, Volume 80, No. 42 - March 4, 2015 Application to Export Electric Energy OE Docket No. EA-405 Del Norte Energy LLC: Federal Register Notice, Volume 80, No. 21 - Feb. 2, 2015...

  3. Application to Export Electric Energy OE Docket No. EA-385 Dynasty...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Inc: Federal Register Notice, Volume 77, No. 129 - July 5, 2012 Application to Export Electric Energy OE Docket No. EA-385 Dynasty Power, Inc: Federal Register Notice, Volume 77,...

  4. Application to export electric energy OE Docket No. EA-315-A...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy: Federal Register Notice Volume 76, No. 217 - Nov. 9, 2011 Application to export electric energy OE Docket No. EA-315-A BP Energy: Federal Register Notice Volume 76, No. 217...

  5. Application to Export Electric Energy OE Docket No. EA-211-C...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Inc: Federal Register Notice, Volume 77, No. 50 -March 14, 2012 Application to Export Electric Energy OE Docket No. EA-211-C DTE Energy Trading Inc: Federal Register Notice, Volume...

  6. Application to Export Electric Energy OE Docket No. EA-407 Vitol...

    Energy Savers [EERE]

    : Federal Register Notice, Volume 80, No. 42 - March 4, 2015 Application to Export Electric Energy OE Docket No. EA-407 Vitol Inc.: Federal Register Notice, Volume 80, No. 42 -...

  7. Application to export electric energy OE Docket No. EA-314-A...

    Broader source: Energy.gov (indexed) [DOE]

    Notice. EA-314-A BP EnergyMX..pdf More Documents & Publications Application to export electric energy OE Docket No. EA-315-A BP Energy: Federal Register Notice Volume 76, No....

  8. Application to Export Electric Energy OE Docket No. EA-359 Louis...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    : Federal Register Notice Volume 74, No. 162 - Aug. 24, 2009 Application to Export Electric Energy OE Docket No. EA-359 Louis Dreyfus Energy Services L.P.: Federal Register Notice...

  9. Application to Export Electric Energy OE Docket No. EA-260-E...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    : Federal Register Notice, Volume 79, No. 65 - April 4, 2014 Application to Export Electric Energy OE Docket No. EA-260-E CP Energy Marketing (US) Inc.: Federal Register Notice,...

  10. Application to Export Electric Energy OE Docket No. EA-409 Saracen...

    Energy Savers [EERE]

    LP: Federal Register Notice, Volume 80, No. 70 - April 13, 2015 Application to Export Electric Energy OE Docket No. EA-409 Saracen Power LP: Federal Register Notice, Volume 80,...

  11. Application to Export Electric Energy OE Docket No. EA-349-A...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    : Federal Register Notice, Volume 79, No. 43 - March 5, 2014 Application to Export Electric Energy OE Docket No. EA-349-A Bruce Power Inc.: Federal Register Notice, Volume 79, No....

  12. Application to Export Electric Energy OE Docket No. EA-354 Endure...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    : Federal Register Notice Volume 74, No. 105 - Jun. 3, 2009 Application to Export Electric Energy OE Docket No. EA-354 Endure Energy, L.L.C.: Federal Register Notice Volume 74, No....

  13. Application to Export Electric Energy OE Docket No. EA-327-A...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    LLC: Federal Register Notice, Volume 77, No. 102 - May 25, 2012 Application to Export Electric Energy OE Docket No. EA-327-A DC Energy LLC: Federal Register Notice, Volume 77,...

  14. Application to Export Electric Energy OE Docket No. EA-383 Pilot...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Inc.: Federal Register Notice Volume 77, No. 38 - Feb. 27, 2012 Application to Export Electric Energy OE Docket No. EA-383 Pilot Power Group, Inc.: Federal Register Notice Volume...

  15. Application to Export Electric Energy OE Docket No. EA-294-B...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    LLC, Federal Register Notice, Volume 77, No. 162 - Aug. 21, 2012 Application to Export Electric Energy OE Docket No. EA-294-B TexMex Energy LLC, Federal Register Notice, Volume 77,...

  16. Final Report on DOE Project entitled Dynamic Optimized Advanced Scheduling of Bandwidth Demands for Large-Scale Science Applications

    SciTech Connect (OSTI)

    Ramamurthy, Byravamurthy [University of Nebraska-Lincoln

    2014-05-05T23:59:59.000Z

    In this project, developed scheduling frameworks for dynamic bandwidth demands for large-scale science applications. In particular, we developed scheduling algorithms for dynamic bandwidth demands in this project. Apart from theoretical approaches such as Integer Linear Programming, Tabu Search and Genetic Algorithm heuristics, we have utilized practical data from ESnet OSCARS project (from our DOE lab partners) to conduct realistic simulations of our approaches. We have disseminated our work through conference paper presentations and journal papers and a book chapter. In this project we addressed the problem of scheduling of lightpaths over optical wavelength division multiplexed (WDM) networks. We published several conference papers and journal papers on this topic. We also addressed the problems of joint allocation of computing, storage and networking resources in Grid/Cloud networks and proposed energy-efficient mechanisms for operatin optical WDM networks.

  17. Bilinear Control Systems: Theory and Applications Instructor: Claudio Altafini, SISSA (Int. School for Advanced Studies), Trieste. e-mail: altafini@sissa.it

    E-Print Network [OSTI]

    Altafini, Claudio

    for Advanced Studies), Trieste. e-mail: altafini@sissa.it Aim: Bilinear Systems are an important class

  18. Advanced Polymer Processing Facility

    SciTech Connect (OSTI)

    Muenchausen, Ross E. [Los Alamos National Laboratory

    2012-07-25T23:59:59.000Z

    Some conclusions of this presentation are: (1) Radiation-assisted nanotechnology applications will continue to grow; (2) The APPF will provide a unique focus for radiolytic processing of nanomaterials in support of DOE-DP, other DOE and advanced manufacturing initiatives; (3) {gamma}, X-ray, e-beam and ion beam processing will increasingly be applied for 'green' manufacturing of nanomaterials and nanocomposites; and (4) Biomedical science and engineering may ultimately be the biggest application area for radiation-assisted nanotechnology development.

  19. Advanced Hydride Laboratory

    SciTech Connect (OSTI)

    Motyka, T.

    1989-01-01T23:59:59.000Z

    Metal hydrides have been used at the Savannah River Tritium Facilities since 1984. However, the most extensive application of metal hydride technology at the Savannah River Site is being planned for the Replacement Tritium Facility, a $140 million facility schedules for completion in 1990 and startup in 1991. In the new facility, metal hydride technology will be used to store, separate, isotopically purify, pump, and compress hydrogen isotopes. In support of the Replacement Tritium Facility, a $3.2 million, cold,'' process demonstration facility, the Advanced Hydride Laboratory began operation in November of 1987. The purpose of the Advanced Hydride Laboratory is to demonstrate the Replacement Tritium Facility's metal hydride technology by integrating the various unit operations into an overall process. This paper will describe the Advanced Hydride Laboratory, its role and its impact on the application of metal hydride technology to tritium handling.

  20. Advanced Hydride Laboratory

    SciTech Connect (OSTI)

    Motyka, T.

    1989-12-31T23:59:59.000Z

    Metal hydrides have been used at the Savannah River Tritium Facilities since 1984. However, the most extensive application of metal hydride technology at the Savannah River Site is being planned for the Replacement Tritium Facility, a $140 million facility schedules for completion in 1990 and startup in 1991. In the new facility, metal hydride technology will be used to store, separate, isotopically purify, pump, and compress hydrogen isotopes. In support of the Replacement Tritium Facility, a $3.2 million, ``cold,`` process demonstration facility, the Advanced Hydride Laboratory began operation in November of 1987. The purpose of the Advanced Hydride Laboratory is to demonstrate the Replacement Tritium Facility`s metal hydride technology by integrating the various unit operations into an overall process. This paper will describe the Advanced Hydride Laboratory, its role and its impact on the application of metal hydride technology to tritium handling.

  1. Climate VISION: Security and Privacy Notices

    Office of Scientific and Technical Information (OSTI)

    SECURITY AND PRIVACY NOTICES Security Notice This website is part of a Federal computer system used to accomplish Federal functions. The Department of Energy uses software programs...

  2. Electricity Advisory Committee Notice of Open Teleconference...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    January 24 2014: Federal Register Notice Volume 78, No. 246 - December 23, 2013 Electricity Advisory Committee Notice of Open Teleconference January 24 2014: Federal Register...

  3. Preliminary Notice of Violation, National Security Technologies...

    Office of Environmental Management (EM)

    Preliminary Notice of Violation, National Security Technologies, LLC - NEA-2011-03 Preliminary Notice of Violation, National Security Technologies, LLC - NEA-2011-03 August 11,...

  4. Application to Amend Presidential Permit OE Docket No. PP-022...

    Energy Savers [EERE]

    to construct, operate and maintain electric transmission facilities at the U.S. - Canada Border: Federal Register Notice Application to Amend Presidential Permit OE Docket No....

  5. Application for presidential permit OE Docket No. PP-299 Sea...

    Broader source: Energy.gov (indexed) [DOE]

    facilities at the U.S-Canada border. - Federal Register Notice Application for presidential permit OE Docket No. PP-299 Sea Breeze Pacific Regional Transmission System...

  6. Application for presidential permit OE Docket No. PP-305 Montana...

    Broader source: Energy.gov (indexed) [DOE]

    at the U.S-Canada border. Federal Register Notice Vol 70 No 210. Application for presidential permit OE Docket No. 305 Montana Alberta Tie Ltd More Documents &...

  7. Amended Application for Presidential Permit OE Docket No. PP...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Line: Federal Register Notice, Volume 79, No. 222 - Nov. 18, 2014 Amended Application for Presidential Permit OE Docket No. PP-398 Minnesota Power - Great Northern Transmission...

  8. Application for presidential permit OE Docket No. PP-362 Champlain...

    Broader source: Energy.gov (indexed) [DOE]

    Federal Register Notice Volume 75, No. 43 More Documents & Publications Application for Presidential Permit OE Docket No. PP-362 Champlain Hudson Power Express, Inc. EIS-0447:...

  9. Application for Presidential Permit OE Docket No. PP-387 Soule...

    Broader source: Energy.gov (indexed) [DOE]

    from Dept of Agriculture 08-28-13.pdf More Documents & Publications Application for Presidential Permit OE Docket No. PP-387 Soule Hydro: Notice of Intervention by Department...

  10. Application for Presidential Permit OE Docket No. PP-398 Minnesota...

    Office of Environmental Management (EM)

    Federal Register Notice, Vol. 79, No. 93 - May 14, 2014 Application for Presidential Permit OE Docket No. PP-398 Minnesota Power - Great Northern Transmission Line: Federal...

  11. Application for Presidential Permit OE Docket No. PP-362 Champlain...

    Office of Environmental Management (EM)

    : Record of Decision for Issuing a Presidential Permit for the CHPE Transmission Line Project: Federal Register Notice, Volume 79, No. 190 - Oct. 1, 2014 Application for...

  12. Laser Direct Drive: Scientific Advances,

    E-Print Network [OSTI]

    1 Laser Direct Drive: Scientific Advances, Technical Achievements, and the Road To Fusion Energy energy gain ( 40) at 1 MJ laser energy · Advanced lasers/ target designs overcome uniformity requirements, medical applications) Gas laser medium is easy to cool (tough to break gas) Nike single beam focus #12

  13. Advanced LBB methodology and considerations

    SciTech Connect (OSTI)

    Olson, R.; Rahman, S.; Scott, P. [Battelle, Columbus, OH (United States)] [and others

    1997-04-01T23:59:59.000Z

    LBB applications have existed in many industries and more recently have been applied in the nuclear industry under limited circumstances. Research over the past 10 years has evolved the technology so that more advanced consideration of LBB can now be given. Some of the advanced considerations for nuclear plants subjected to seismic loading evaluations are summarized in this paper.

  14. Development of improved processing and evaluation methods for high reliability structural ceramics for advanced heat engine applications Phase II. Final report

    SciTech Connect (OSTI)

    Pujari, V.J.; Tracey, D.M.; Foley, M.R. [and others

    1996-02-01T23:59:59.000Z

    The research program had as goals the development and demonstration of significant improvements in processing methods, process controls, and nondestructive evaluation (NDE) which can be commercially implemented to produce high reliability silicon nitride components for advanced heat engine applications at temperatures to 1370{degrees}C. In Phase I of the program a process was developed that resulted in a silicon nitride - 4 w% yttria HIP`ed material (NCX 5102) that displayed unprecedented strength and reliability. An average tensile strength of 1 GPa and a strength distribution following a 3-parameter Weibull distribution were demonstrated by testing several hundred buttonhead tensile specimens. The Phase II program focused on the development of methodology for colloidal consolidation producing green microstructure which minimizes downstream process problems such as drying, shrinkage, cracking, and part distortion during densification. Furthermore, the program focused on the extension of the process to gas pressure sinterable (GPS) compositions. Excellent results were obtained for the HIP composition processed for minimal density gradients, both with respect to room-temperature strength and high-temperature creep resistance. Complex component fabricability of this material was demonstrated by producing engine-vane prototypes. Strength data for the GPS material (NCX-5400) suggest that it ranks very high relative to other silicon nitride materials in terms of tensile/flexure strength ratio, a measure of volume quality. This high quality was derived from the closed-loop colloidal process employed in the program.

  15. Recent advances in hydraulic fracturing

    SciTech Connect (OSTI)

    Gidley, J.L.

    1989-01-01T23:59:59.000Z

    This book is a reference to the application of significant technological advances in hydraulic fracturing. It features illustrative problems to demonstrate specific applications of advanced technologies. Chapters examine pretreatment formation evaluation, rock mechanics and fracture geometry, 2D and 3D fracture-propagation models, propping agents and fracture conductivity, fracturing fluids and additives, fluid leakoff, flow behavior, proppant transport, treatment design, well completions, field implementation, fracturing-pressure analysis, postfracture formation evaluation, fracture azimuth and geometry determination, and economics of fracturing.

  16. Numerical Investigation of Advanced Compressor Technologies

    Broader source: Energy.gov [DOE]

    The purpose of the work was to explore advanced boost technologies to support clean diesel combustion, such as HCCI/LTC applications.

  17. Max Planck Society for the Advancement of Science

    E-Print Network [OSTI]

    Max Planck Society for the Advancement of Science Pressand features are hardly noticeable when the whole face is inverted (rotated 180°), but strikingly grotesque are still important. "Although we look at the eyes first our neural functions still grasp the whole picture

  18. Electricity Advisory Committee Notice of Open Meeting July 12...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    July 12, 2011: Federal Register Notice Volume 76, No. 122 - Jun. 24, 2011 Electricity Advisory Committee Notice of Open Meeting July 12, 2011: Federal Register Notice Volume 76,...

  19. EIS-0424: EPA Notice of Availability of the Draft Environmental...

    Broader source: Energy.gov (indexed) [DOE]

    Notice of Cancellation of an Environmental Impact Statement EIS-0365: EPA Notice of Availability of the Final Environmental Impact Statement EIS-0472: EPA Notice of Availability of...

  20. EIS-0414: DOE Notice of Availability of the Draft Environmental...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    DOE Notice of Availability of the Draft Environmental Impact Statement and Notice of Public Hearing EIS-0414: DOE Notice of Availability of the Draft Environmental Impact Statement...

  1. advanced robot control: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Symposium on Measurement and Control in Robotics -Toward Advanced Robots: Design, Sensors, Control and Applications - Computer Technologies and Information Sciences...

  2. CONSTRUCTION NOTICE SUPPLEMENT Additional Notice to Ongoing Project

    E-Print Network [OSTI]

    Dong, Yingfei

    CONSTRUCTION NOTICE SUPPLEMENT Additional Notice to Ongoing Project TO: Deans, Directors 23, 2011 HOURS OF CONSTRUCTION: Monday to Friday 7:30 a.m. to 4:00 p.m. ACCESSIBLE ROUTES: Accessible routes shall be maintained. ADVISORY: All persons in the vicinity of this construction project

  3. CONSTRUCTION NOTICE SUPPLEMENT Additional Notice to Ongoing Project

    E-Print Network [OSTI]

    CONSTRUCTION NOTICE SUPPLEMENT Additional Notice to Ongoing Project TO: Deans, Directors on the roof to June 30, 2011. DURATION OF PROJECT: May 21, 2011 to June 30, 2011 HOURS OF CONSTRUCTION: Monday persons in the vicinity of this construction project are advised to respect all construction barricades

  4. CONSTRUCTION NOTICE SUPPLEMENT Additional Notice to Ongoing Project

    E-Print Network [OSTI]

    CONSTRUCTION NOTICE SUPPLEMENT Additional Notice to Ongoing Project TO: Deans, Directors. DURATION OF PROJECT: May 31, 2011 to June 21, 2011 HOURS OF CONSTRUCTION: Monday to Friday 7:30 a.m. to 4. The loading area will be closed on May 31, 2011. ADVISORY: All persons in the vicinity of this construction

  5. Advancement in Fuel Spray and Combustion Modeling for Compression...

    Broader source: Energy.gov (indexed) [DOE]

    Applications Advancement in Fuel Spray and Combustion Modeling for Compression Ignition Engine Applications 2013 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies...

  6. Advanced Materials and Processing of Composites for High Volume...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Applications (ACC932) Advanced Materials and Processing of Composites for High Volume Applications (ACC932) 2012 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies...

  7. Development of improved processing and evaluation methods for high reliability structural ceramics for advanced heat engine applications, Phase 1. Final report

    SciTech Connect (OSTI)

    Pujari, V.K.; Tracey, D.M.; Foley, M.R.; Paille, N.I.; Pelletier, P.J.; Sales, L.C.; Wilkens, C.A.; Yeckley, R.L. [Norton Co., Northboro, MA (United States)

    1993-08-01T23:59:59.000Z

    The program goals were to develop and demonstrate significant improvements in processing methods, process controls and non-destructive evaluation (NDE) which can be commercially implemented to produce high reliability silicon nitride components for advanced heat engine applications at temperatures to 1,370{degrees}C. The program focused on a Si{sub 3}N{sub 4}-4% Y{sub 2}O{sub 3} high temperature ceramic composition and hot-isostatic-pressing as the method of densification. Stage I had as major objectives: (1) comparing injection molding and colloidal consolidation process routes, and selecting one route for subsequent optimization, (2) comparing the performance of water milled and alcohol milled powder and selecting one on the basis of performance data, and (3) adapting several NDE methods to the needs of ceramic processing. The NDE methods considered were microfocus X-ray radiography, computed tomography, ultrasonics, NMR imaging, NMR spectroscopy, fluorescent liquid dye penetrant and X-ray diffraction residual stress analysis. The colloidal consolidation process route was selected and approved as the forming technique for the remainder of the program. The material produced by the final Stage II optimized process has been given the designation NCX 5102 silicon nitride. According to plan, a large number of specimens were produced and tested during Stage III to establish a statistically robust room temperature tensile strength database for this material. Highlights of the Stage III process demonstration and resultant database are included in the main text of the report, along with a synopsis of the NCX-5102 aqueous based colloidal process. The R and D accomplishments for Stage I are discussed in Appendices 1--4, while the tensile strength-fractography database for the Stage III NCX-5102 process demonstration is provided in Appendix 5. 4 refs., 108 figs., 23 tabs.

  8. Engineering development of advanced physical fine coal cleaning for premium fuel applications. Quarterly technical progress report 14, January--March 1996

    SciTech Connect (OSTI)

    Moro, N.; Shields, G.L.; Smit, F.J.; Jha, M.C.

    1996-04-30T23:59:59.000Z

    The primary goal of this project is the engineering development of two advanced physical fine coal cleaning processes, column flotation and selective agglomeration, for premium fuel applications. The project scope includes laboratory research and bench-scale testing on six coals to optimize these processes, followed by the design, construction, and operation of a 2-t/hr process development unit (PDU). The project began in October, 1992, and is scheduled for completion by June 1997. During Quarter 14 (January--March 1996), parametric testing of the 30-inch Microcel{trademark} flotation column at the Lady Dunn Plant continued under Subtask 3.2. Subtask 3. 3 testing, investigating a novel Hydrophobic Dewatering process (HD), continued this quarter with parametric testing of the batch dewatering unit. Coal product moistures of 3 to 12 percent were achieved, with higher percent solids slurry feeds resulting in lower product moistures. For a given percent solids feed, the product moisture decreased with increasing butane to dry coal ratios. Stirring time, stirring rate, and settling time were all found to have little effect on the final moisture content. Continuing Subtask 6.4 work, investigating coal-water-fuel slurry formulation for coals cleaned by selective agglomeration, indicated that pH adjustment to 10 resulted in marginally better (lower viscosity) slurries for one of the two coals tested. Subtask 6.5 agglomeration bench-scale testing results indicate that the new Taggart coal requires a grind with a d{sub 80} of approximately 33 microns to achieve the 1 lb ash/MBtu product quality specification. Also under Subtask 6.5, reductions in the various trace element concentrations accomplished during selective agglomeration were determined. Work was essentially completed on the detailed design of the PDU selective agglomeration module under Task 7 with the issuing of a draft report.

  9. Advanced thyristor valve project

    SciTech Connect (OSTI)

    Damsky, B.L.

    1984-01-01T23:59:59.000Z

    General Electrics's thyristor valve project incorporates the most advanced technologies available. With joint funding from the Electric Power Research Institute, commercial application of the separate light-triggered thyristor is now underway. The cesium vapor lamp source to trigger the light sensitive thyristors will reduce component complexity and cost. A unique thermal management feature relies on forced vaporization cooling with Freon-113, which equals the thermal performance of water without posing insulation reliability problems. 7 figures.

  10. Application of Reservoir Characterization and Advanced Technology to Improve Recovery and Economics in a Lower Quality Shallow Shelf Carbonate Reservoir, Class II

    SciTech Connect (OSTI)

    Hickman, T. Scott; Justice, James J.; Egg, Rebecca

    2001-08-07T23:59:59.000Z

    The Oxy operated Class 2 Project at West Welch Project is designed to demonstrate how the use of advanced technology can improve the economics of miscible CO2 injection projects in lower quality Shallow Shelf Carbonate reservoirs. The research and design phase (Budget Period 1) primarily involved advanced reservoir demonstration characterization. The current demonstration phase (Budget Period 2) is the implementation of the reservoir management plan for an optimum miscible CO2 flood design based on the reservoir characterization.

  11. Westinghouse advanced particle filter system

    SciTech Connect (OSTI)

    Lippert, T.E.; Bruck, G.J.; Sanjana, Z.N.; Newby, R.A.

    1995-11-01T23:59:59.000Z

    Integrated Gasification Combined Cycles (IGCC), Pressurized Fluidized Bed Combustion (PFBC) and Advanced PFBC (APFB) are being developed and demonstrated for commercial power generation application. Hot gas particulate filters are key components for the successful implementation of IGCC, PFBC and APFB in power generation gas turbine cycles. The objective of this work is to develop and qualify through analysis and testing a practical hot gas ceramic barrier filter system that meets the performance and operational requirements of these advanced, solid fuel power generation cycles.

  12. Application to Export Electric Energy OE Docket No. EA-375-A...

    Energy Savers [EERE]

    Corporation: Federal Register Notice, Volume 80, No. 80 - April 27, 2015 Application to Export Electric Energy OE Docket No. EA-375-A Rainbow Energy Marketing Corporation: Federal...

  13. Application for Presidental Permit OE Docket No. PP-230-4 Internationa...

    Office of Environmental Management (EM)

    Supplemental Filing - Extension of Comments: Federal Register Notice Volume 76, No. 187 - Sep. 27, 2011 Application for Presidental Permit OE Docket No. PP-230-4 International...

  14. Application to Export Electric Energy OE Docket No. EA-296-B...

    Office of Environmental Management (EM)

    4, 2012 Application from Rainbow Energy Marketing Corp to export electric energy to Canada. Federal Register Notice. EA-296-B RainbowCN.pdf More Documents & Publications...

  15. Application to Export Electric Energy OE Docket No. EA-297-B...

    Office of Environmental Management (EM)

    Enterprises, Canada Ltd: Federal Register Notice Volume 76, No. 41 - Mar. 2, 2011 Application to Export Electric Energy OE Docket No. EA-297-B SESCO Enterprises, Canada Ltd:...

  16. Application to Export Electric Energy OE Docket No. EA-290-B...

    Broader source: Energy.gov (indexed) [DOE]

    Generation to export electric energy to Canada. Federal Register Notice Vol 76 No 41 EA-290-B Ontario Power Generation More Documents & Publications Application to Export Electric...

  17. Application to export electric energy OE Docket No. EA-164-C...

    Broader source: Energy.gov (indexed) [DOE]

    Energy Commodities Group, Inc Application to Export Electric Energy OE Docket No. EA-353 Boralex Fort Fairfield LP & Boralex Ashland LP: Federal Register Notice Vol 74 No 151...

  18. Application to Export Electric Energy OE Docket No. EA-389 Great...

    Broader source: Energy.gov (indexed) [DOE]

    Applicaiton from Great Bay Energy to export electric energy to Canada. Federal Register Notice. EA-389 Great Bay Energy (CN).pdf More Documents & Publications Application to Export...

  19. Application to Export Electric Energy OE Docket No. EA-408 Nalcor...

    Energy Savers [EERE]

    Federal Register Notice, Volume 80, No. 42 - March 4, 2015 Application to Export Electric Energy OE Docket No. EA-408 Nalcor Energy Marketing Corporation: Federal Register...

  20. Application to Export Electric Energy OE Docket No. EA-264-C...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Inc.: Federal Register Notice, Volume 79, No. 116 - June 17, 2014 Application to Export Electric Energy OE Docket No. EA-264-C ENMAX Energy Marketing Inc.: Federal Register...

  1. Application to Export Electric Energy OE Docket No. EA-364-A...

    Energy Savers [EERE]

    Federal Register Notice, Volume 80, No. 42 - March 4, 2015 Application to Export Electric Energy OE Docket No. EA-364-A Noble Americas Gas & Power Corporation: Federal...

  2. Application to Export Electric Energy OE Docket No. EA-258-D...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Inc.: Federal Register Notice, Volume 78. No. 213 - Nov. 4, 2013 Application to Export Electric Energy OE Docket No. EA-258-D Brookfield Energy Marketing Inc.: Federal Register...

  3. Application to Export Electric Energy OE Docket No. EA-386 IPR...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Federal Register Notice, Volume 77, No. 129 - July 5, 2012 Application to Export Electric Energy OE Docket No. EA-386 IPR-GDF SUEZ Energy Marketing (GSEMNA): Federal...

  4. Application to Export Electric Energy OE Docket No. EA-296-A...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Federal Register Notice Volume 72, No. 158 - Aug. 16, 2007 Application to Export Electric Energy OE Docket No. EA-296-A Rainbow Energy Marketing Corporation: Federal...

  5. Application to Export Electric Energy OE Docket No. EA-363-A...

    Energy Savers [EERE]

    Federal Register Notice, Volume 80, No. 42 - March 4, 2015 Application to Export Electric Energy OE Docket No. EA-363-A Noble Americas Gas & Power Corporation: Federal...

  6. Application to Export Electric Energy OE Docket No. EA-388 TEC...

    Broader source: Energy.gov (indexed) [DOE]

    TEC Energy to export electric energy to Canada. Federal Register Notice. EA-388 TEC CN.pdf More Documents & Publications Application to Export Electric Energy OE Docket No....

  7. Application to Export Electric Energy OE Docket No. EA-368-A...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    LP: Federal Register Notice, Volume 80, No. 42 - March 4, 2015 Application to Export Electric Energy OE Docket No. EA-368-A Brookfield Energy Marketing LP: Federal Register...

  8. Application to Export Electric Energy OE Docket No. EA-185-D...

    Energy Savers [EERE]

    Inc.: Federal Register Notice, Volume 80, No. 17 - Jan. 27, 2015 Amended Application for Presidential Permit OE Docket No. PP-398 Minnesota Power - Great Northern Transmission...

  9. Application for Presidential Permit OE Docket No. PP-230-4 Internation...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Comments: Federal Register Notice Volume 76, No. 204 - Oct. 21, 2011 Application for Presidential Permit OE Docket No. PP-230-4 International Transmission Company:...

  10. Application for a Presidential Permit OE Docket No. PP-362 Champlain...

    Broader source: Energy.gov (indexed) [DOE]

    canada Border. Amendment to Presidential Permit Application Letter. LetterPermitAmendmentof28Feb12.pdf More Documents & Publications EIS-0447: Amended Notice of Intent to...

  11. advanced water-cooled reactors: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

  12. advanced gas-cooled reactor: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

  13. advanced coal-based power: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

  14. advanced test-analysis model: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

  15. advanced self-shielding models: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

  16. advanced light-water reactors: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

  17. advanced t-stage nasopharyngeal: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

  18. advanced glass-mat thermoplastic: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

  19. advanced coal-fired low-emission: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

  20. advanced liquid-cooling garment: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

  1. advanced beam-dynamics simulation: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

  2. advanced in-duct sorbent: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

  3. advanced coal-fueled gas: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

  4. advanced physics-based modeling: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

  5. advanced unresectable non-small: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

  6. advanced gas-cooled reactors: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . . . . 18 3.4.1 Heat Exchanger - Code description . . . . . . . . . . . . . . . 18 3.4.2 Simulation ResultsADVANCED POWER PLANT MODELING WITH APPLICATIONS TO THE ADVANCED BOILING...

  7. Coherent Research Plan for the 3rd Generation Advanced high Strength...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Coherent Research Plan for the 3rd Generation Advanced high Strength Steels for Automotive Applications Coherent Research Plan for the 3rd Generation Advanced high Strength Steels...

  8. APPLICATION OF RESERVOIR CHARACTERIZATION AND ADVANCED TECHNOLOGY TO IMPROVE RECOVERY AND ECONOMICS IN A LOWER QUALITY SHALLOW SHELF SAN ANDRES RESERVOIR

    SciTech Connect (OSTI)

    T. Scott Hickman; James J. Justice

    2001-06-16T23:59:59.000Z

    The Class 2 Project at West Welch was designed to demonstrate the use of advanced technologies to enhance the economics of improved oil recovery (IOR) projects in lower quality Shallow Shelf Carbonate (SSC) reservoirs, resulting in recovery of additional oil that would otherwise be left in the reservoir at project abandonment. Accurate reservoir description is critical to the effective evaluation and efficient design of IOR projects in the heterogeneous SSC reservoirs. Therefore, the majority of Budget Period 1 was devoted to reservoir characterization. Technologies being demonstrated include: (1) Advanced petrophysics; (2) Three-dimensional (3-D) seismic; (3) Crosswell bore tomography; (4) Advanced reservoir simulation; (5) Carbon dioxide (CO{sub 2}) stimulation treatments; (6) Hydraulic fracturing design and monitoring; and (7) Mobility control agents.

  9. APPLICATION OF RESERVOIR CHARACTERIZATION AND ADVANCED TECHNOLOGY TO IMPROVE RECOVERY AND ECONOMICS IN A LOWER QUALITY SHALLOW SHELF SAN ANDRES RESERVOIR

    SciTech Connect (OSTI)

    T. Scott Hickman; James J. Justice

    2001-08-10T23:59:59.000Z

    The Class 2 Project at West Welch was designed to demonstrate the use of advanced technologies to enhance the economics of improved oil recovery (IOR) projects in lower quality Shallow Shelf Carbonate (SSC) reservoirs, resulting in recovery of additional oil that would otherwise be left in the reservoir at project abandonment. Accurate reservoir description is critical to the effective evaluation and efficient design of IOR projects in the heterogeneous SSC reservoirs. Therefore, the majority of Budget Period 1 was devoted to reservoir characterization. Technologies being demonstrated include: (1) Advanced petrophysics; (2) Three-dimensional (3-D) seismic; (3) Crosswell bore tomography; (4) Advanced reservoir simulation; (5) Carbon dioxide (CO{sub 2}) stimulation treatments; (6) Hydraulic fracturing design and monitoring; and (7) Mobility control agents.

  10. APPLICATION OF RESERVOIR CHARACTERIZATION AND ADVANCED TECHNOLOGY TO IMPROVE RECOVERY AND ECONOMICS IN A LOWER QUALITY SHALLOW SHELF SAN ANDRES RESERVOIR

    SciTech Connect (OSTI)

    T. Scott Hickman

    2003-01-17T23:59:59.000Z

    The Class 2 Project at West Welch was designed to demonstrate the use of advanced technologies to enhance the economics of improved oil recovery (IOR) projects in lower quality Shallow Shelf Carbonate (SSC) reservoirs, resulting in recovery of additional oil that would otherwise be left in the reservoir at project abandonment. Accurate reservoir description is critical to the effective evaluation and efficient design of IOR projects in the heterogeneous SSC reservoirs. Therefore, the majority of Budget Period 1 was devoted to reservoir characterization. Technologies being demonstrated include: (1) Advanced petrophysics; (2) Three-dimensional (3-D) seismic; (3) Crosswell bore tomography; (4) Advanced reservoir simulation; (5) Carbon dioxide (CO{sub 2}) stimulation treatments; (6) Hydraulic fracturing design and monitoring; and (7) Mobility control agents.

  11. APPLICATION OF RESERVOIR CHARACTERIZATION AND ADVANCED TECHNOLOGY TO IMPROVE RECOVERY AND ECONOMICS IN A LOWER QUALITY SHALLOW SHELF SAN ANDRES RESERVOIR

    SciTech Connect (OSTI)

    T. Scott Hickman; James J. Justice

    2001-12-11T23:59:59.000Z

    The Class 2 Project at West Welch was designed to demonstrate the use of advanced technologies to enhance the economics of improved oil recovery (IOR) projects in lower quality Shallow Shelf Carbonate (SSC) reservoirs, resulting in recovery of additional oil that would otherwise be left in the reservoir at project abandonment. Accurate reservoir description is critical to the effective evaluation and efficient design of IOR projects in the heterogeneous SSC reservoirs. Therefore, the majority of Budget Period 1 was devoted to reservoir characterization. Technologies being demonstrated include: (1) Advanced petrophysics; (2) Three-dimensional (3-D) seismic; (3) Crosswell bore tomography; (4) Advanced reservoir simulation; (5) Carbon dioxide (CO{sub 2}) stimulation treatments; (6) Hydraulic fracturing design and monitoring; and (7) Mobility control agents.

  12. APPLICATION OF RESERVOIR CHARACTERIZATION AND ADVANCED TECHNOLOGY TO IMPROVE RECOVERY AND ECONOMICS IN A LOWER QUALITY SHALLOW SHELF SAN ANDRES RESERVOIR

    SciTech Connect (OSTI)

    Raj. Kumar; Keith Brown; T. Scott Hickman; James J. Justice

    2000-04-27T23:59:59.000Z

    The Class 2 Project at West Welch was designed to demonstrate the use of advanced technologies to enhance the economics of improved oil recovery (IOR) projects in lower quality Shallow Shelf Carbonate (SSC) reservoirs, resulting in recovery of additional oil that would otherwise be left in the reservoir at project abandonment. Accurate reservoir description is critical to the effective evaluation and efficient design of IOR projects in the heterogeneous SSC reservoirs. Therefore, the majority of Budget Period 1 was devoted to reservoir characterization. Technologies being demonstrated include: (1) Advanced petrophysics; (2) Three-dimensional (3-D) seismic; (3) Crosswell bore tomography; (4) Advanced reservoir simulation; (5) Carbon dioxide (CO{sub 2}) stimulation treatments; (6) Hydraulic fracturing design and monitoring; and (7) Mobility control agents.

  13. Idaho Application for Permit to Convert a Geothermal Injection...

    Open Energy Info (EERE)

    navigation, search OpenEI Reference LibraryAdd to library Form: Idaho Application for Permit to Convert a Geothermal Injection Well - Form 4003-3 Form Type ApplicationNotice Form...

  14. Idaho Right-of-Way Encroachment Application and Permit - Other...

    Open Energy Info (EERE)

    Jump to: navigation, search OpenEI Reference LibraryAdd to library Form: Idaho Right-of-Way Encroachment Application and Permit - Other Encroachments Form Type ApplicationNotice...

  15. Advanced natural gas-fired turbine system utilizing thermochemical recuperation and/or partial oxidation for electricity generation, greenfield and repowering applications

    SciTech Connect (OSTI)

    NONE

    1997-03-01T23:59:59.000Z

    The performance, economics and technical feasibility of heavy duty combustion turbine power systems incorporating two advanced power generation schemes have been estimated to assess the potential merits of these advanced technologies. The advanced technologies considered were: Thermochemical Recuperation (TCR), and Partial Oxidation (PO). The performance and economics of these advanced cycles are compared to conventional combustion turbine Simple-Cycles and Combined-Cycles. The objectives of the Westinghouse evaluation were to: (1) simulate TCR and PO power plant cycles, (2) evaluate TCR and PO cycle options and assess their performance potential and cost potential compared to conventional technologies, (3) identify the required modifications to the combustion turbine and the conventional power cycle components to utilize the TCR and PO technologies, (4) assess the technical feasibility of the TCR and PO cycles, (5) identify what development activities are required to bring the TCR and PO technologies to commercial readiness. Both advanced technologies involve the preprocessing of the turbine fuel to generate a low-thermal-value fuel gas, and neither technology requires advances in basic turbine technologies (e.g., combustion, airfoil materials, airfoil cooling). In TCR, the turbine fuel is reformed to a hydrogen-rich fuel gas by catalytic contact with steam, or with flue gas (steam and carbon dioxide), and the turbine exhaust gas provides the indirect energy required to conduct the endothermic reforming reactions. This reforming process improves the recuperative energy recovery of the cycle, and the delivery of the low-thermal-value fuel gas to the combustors potentially reduces the NO{sub x} emission and increases the combustor stability.

  16. Advanced Combustion

    SciTech Connect (OSTI)

    Holcomb, Gordon R. [NETL

    2013-03-11T23:59:59.000Z

    The activity reported in this presentation is to provide the mechanical and physical property information needed to allow rational design, development and/or choice of alloys, manufacturing approaches, and environmental exposure and component life models to enable oxy-fuel combustion boilers to operate at Ultra-Supercritical (up to 650{degrees}C & between 22-30 MPa) and/or Advanced Ultra-Supercritical conditions (760{degrees}C & 35 MPa).

  17. EIS-0375: Advance Notice of Intent to Prepare an Environmental...

    Broader source: Energy.gov (indexed) [DOE]

    an Environmental Impact Statement Third National Report for the Joint Convention on the Safety of Spent Fuel Management and on the Safety of Radioactive Waste Management EIS-0375...

  18. EIS-0406: Advance Notice of Intent to Prepare an Environmental...

    Broader source: Energy.gov (indexed) [DOE]

    Lands in 39 States The Department of Energy must identify energy corridors in 39 states, other than the 11 contiguous Western states that might be used for oil, gas, and hydrogen...

  19. EPA's Recent Advance Notice on Greenhouse Gases | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny:RevisedAdvisory Board Contributions EMEM STAR CertifiedRed5101States |EPA's Recent

  20. HOUSING SERVICES NOTICE OF INTENTION TO CANCEL

    E-Print Network [OSTI]

    Seldin, Jonathan P.

    HOUSING SERVICES NOTICE OF INTENTION TO CANCEL SINGLE STUDENT HOUSING LICENSE AGREEMENT DATE RECEIVED:_______________________ TO: Housing Services FROM:_________________________________ ID NUMBER:___________________________ In accordance with the RESIDENCE CANCELLATION POLICY/LICENSE AGREEMENT, I hereby give Housing Services notice

  1. 30-Day Federal Register Notice - Proposed

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Revised 11-2009 30-Day Federal Register Notice - Proposed 6450-01-P DEPARTMENT OF ENERGY Proposed Agency Information Collection AGENCY: U.S. Department of Energy. ACTION: Notice...

  2. Notices of Availability (NOA) | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    May 11, 2015 EIS-0283-S2: EPA Notice of Availability of the Final Supplemental Environmental Impact Statement Surplus Plutonium Disposition May 1, 2015 EIS-0408: DOE Notice of...

  3. Privacy & Security Notice | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Privacy & Security Notice Security Notice October 31, 2000 This web site is part of a federal computer system used to accomplish federal functions. The U.S. Department of Energy...

  4. Public Notice Applicability Table | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to:Ezfeedflag Jump to:ID8/OrganizationTechProbSolutionsPublic Art Generates

  5. Federal Register Notice: National Nuclear Security Administration...

    Office of Environmental Management (EM)

    Site-Wide Environmental Impact Statement for Sandia National Laboratories, New Mexico (SNLNM) Federal Register Notice: National Nuclear Security Administration...

  6. Advanced Combustion

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office511041cloth DocumentationProducts (VAP) VAP7-0973 1BP-14 Power and TransmissionAdolphusAdvanced Energy

  7. Update on mobile applications in dermatology

    E-Print Network [OSTI]

    Patel, Shivani; Eluri, Madhu; Boyers, Lindsay N; Karimkhani, Chante; Dellavalle, Robert

    2015-01-01T23:59:59.000Z

    FDA regulation of mobile health technologies. N Engl J Med.providers. As technology advances, mobile applications maytechnology continues to advance and physicians have greater access to mobile-

  8. Copyright 2013 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. ContinuousAssuranceModel

    E-Print Network [OSTI]

    Lin, Xiaodong

    · Security · Incidents · Outliers and Transactions IT General Controls: · Database · Operating System · Manual business process controls Optimized by monitoring change to a baseline #12;© Copyright 2013 notice. HP confidential.6 Business Process Control Objectives Automated (Application) Controls · Changes

  9. Reducing Safety Flaring through Advanced Control 

    E-Print Network [OSTI]

    Hokanson, D.; Lehman, K.; Matsumoto, S.; Takai, N.; Takase, F.

    2010-01-01T23:59:59.000Z

    An advanced process control application, using DMCplus® (Aspen Technology, Inc.), was developed to substantially reduce fuel gas losses to the flare at a large integrated refining / petrochemical complex. Fluctuations in internal fuel gas system...

  10. Reducing Safety Flaring through Advanced Control

    E-Print Network [OSTI]

    Hokanson, D.; Lehman, K.; Matsumoto, S.; Takai, N.; Takase, F.

    2010-01-01T23:59:59.000Z

    An advanced process control application, using DMCplus® (Aspen Technology, Inc.), was developed to substantially reduce fuel gas losses to the flare at a large integrated refining / petrochemical complex. Fluctuations in internal fuel gas system...

  11. Computational Optimization and Applications

    E-Print Network [OSTI]

    15

    2015-04-02T23:59:59.000Z

    Pitman Advanced Publishing Program, Boston, 1984. [10] M. Hanke, Regularizing Levenberg-Marquardt scheme, with applications to inverse groundwater. 19. 1.

  12. Application of Reservoir Characterization and Advanced Technology to Improve Recovery and Economics in a Lower Quality Shallow Shelf San Andres Reservoir.

    SciTech Connect (OSTI)

    Taylor, A.R.; Hickman, T.S. [T. SCOTT HICKMAN AND ASSOCIATES 550 WEST TEXAS STREET SUITE 950 MIDLAND, TX (United States) 79701; Justice, J.J. [ADVANCED RESERVOIR TECHNOLOGIES P. O. BOX 985 ADDISON, TX (United States) 75001-0985

    1997-07-30T23:59:59.000Z

    The Class 2 Project at West Welch was designed to demonstrate the use of advanced technologies to enhance the economics of improved oil recovery (IOR) projects in lower quality Shallow Shelf Carbonate (SSC) reservoirs, resulting in recovery of additional oil that would otherwise be left in the reservoir at project abandonment. Accurate reservoir description is critical to the effective evaluation and efficient design of IOR projects in the heterogeneous SSC reservoirs. Therefore, the majority of Budget Period 1 was devoted to reservoir characterization. Technologies being demonstrated include: l. Advanced petrophysics 2. Three-dimensional (3-D) seismic 3. Cross-well bore tomography 4. Advanced reservoir simulation 5. Carbon dioxide (CO{sub 2}) stimulation treatments 6. Hydraulic fracturing design and monitoring 7. Mobility control agents. West Welch Unit is one of four large waterflood units in the Welch Field in the northwestern portion of Dawson County, Texas. The Welch Field was discovered in the early 1940`s and produces oil under a solution gas drive mechanism from the San Andres formation at approximately 4800 ft. The field has been under waterflood for 30 years and a significant portion has been infill-drilled on 20-ac density. A 1982-86 Pilot C0{sub 2} injection project in the offsetting South Welch Unit yielded positive results. Recent installation of a C0{sub 2} pipeline near the field allowed the phased development of a miscible C0 injection project at the South Welch Unit. The reservoir quality at the West Welch Unit is poorer than other San Andres reservoirs due to its relative position to sea level during deposition. Because of the proximity of a C0{sub 2} source and the C0{sub 2} operating experience that would be available from the South Welch Unit, West Welch Unit is an ideal location for demonstrating methods for enhancing economics of IOR projects in lower quality SSC reservoirs. This Class 2 project concentrates on the efficient design of a miscible C0{sub 2} project based on detailed reservoir characterization from advanced petrophysics, 3- D seismic interpretations and cross wellbore tomography interpretations. During the quarter, the project area was expanded to include an area where the seismic attribute mapping indicated potential for step-out locations. Progress was made on interpreting the crosswell seismic data and the C0{sub 2} performance simulation was further improved. Construction of facilities required for C0{sub 2} injection were completed.

  13. Electricity Advisory Committee Notice of Open Meeting March 12...

    Energy Savers [EERE]

    12 and 13, 2014: Federal Register Notice Volume 79, No. 37 - February 25, 2014 Electricity Advisory Committee Notice of Open Meeting March 12 and 13, 2014: Federal Register Notice...

  14. Electricity Advisory Committee Notice of Open Meeting June 5...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    5 and 6, 2013: Federal Register Notice Volume 78, No. 93 - May 14, 2013 Electricity Advisory Committee Notice of Open Meeting June 5 and 6, 2013: Federal Register Notice Volume 78,...

  15. Electricity Advisory Committee Notice of Open Meeting March 6...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    6 and 7, 2013: Federal Register Notice Volume 78, No. 26 - Feb. 7, 2013 Electricity Advisory Committee Notice of Open Meeting March 6 and 7, 2013: Federal Register Notice Volume...

  16. Electricity Advisory Committee Notice of Open Meeting March 5...

    Energy Savers [EERE]

    5 and 6, 2012: Federal Register Notice Volume 77, No. 35 - Feb. 22, 2012 Electricity Advisory Committee Notice of Open Meeting March 5 and 6, 2012: Federal Register Notice Volume...

  17. Electricity Advisory Committee Notice of Open Meeting October...

    Office of Environmental Management (EM)

    19 and 20, 2011: Federal Register Notice Volume 76, No. 187 - Sep. 27, 2011 Electricity Advisory Committee Notice of Open Meeting October 19 and 20, 2011: Federal Register Notice...

  18. Electricity Advisory Committee Notice of Open Meeting March 26...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    26 and 27, 2015: Federal Register Notice Volume 80, No. 31 - February 17, 2015 Electricity Advisory Committee Notice of Open Meeting March 26 and 27, 2015: Federal Register Notice...

  19. INSTRUCTIONS FOR OVERNIGHT EXPERIMENT NOTICE When to complete this notice?

    E-Print Network [OSTI]

    Shull, Kenneth R.

    requiring this notice include those involving highly reactive chemicals; highly exothermic reactions for unexpected interruptions in utility services (e.g., electricity, cooling water, inert gas) and train all lab of leaks or spills. Place protective shielding around reactive processes. · Keep c

  20. Integrated CHP/Advanced Reciprocating Internal Combustion Engine...

    Broader source: Energy.gov (indexed) [DOE]

    restrictions. Integrated Combined Heat and PowerAdvanced Reciprocating Internal Combustion Engine System for Landfill Gas to Power Applications More Documents & Publications...

  1. advanced fingerprint analysis: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    CSR Microbunching Zhirong Huang and Kwang302 Advanced Photon Source Derivation: KJK Application: ZRH Based on ZRH & KJK Main References SSY (Saldin, Schneidmiller,...

  2. advanced photon radiotherapy: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    CSR Microbunching Zhirong Huang and Kwang302 Advanced Photon Source Derivation: KJK Application: ZRH Based on ZRH & KJK Main References SSY (Saldin, Schneidmiller,...

  3. advanced analysis methods: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    CSR Microbunching Zhirong Huang and Kwang302 Advanced Photon Source Derivation: KJK Application: ZRH Based on ZRH & KJK Main References SSY (Saldin, Schneidmiller,...

  4. advanced main control: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    CSR Microbunching Zhirong Huang and Kwang302 Advanced Photon Source Derivation: KJK Application: ZRH Based on ZRH & KJK Main References SSY (Saldin, Schneidmiller,...

  5. aps advanced photon: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    CSR Microbunching Zhirong Huang and Kwang302 Advanced Photon Source Derivation: KJK Application: ZRH Based on ZRH & KJK Main References SSY (Saldin, Schneidmiller,...

  6. advanced analysis techniques: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    CSR Microbunching Zhirong Huang and Kwang302 Advanced Photon Source Derivation: KJK Application: ZRH Based on ZRH & KJK Main References SSY (Saldin, Schneidmiller,...

  7. advanced photon source: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    CSR Microbunching Zhirong Huang and Kwang302 Advanced Photon Source Derivation: KJK Application: ZRH Based on ZRH & KJK Main References SSY (Saldin, Schneidmiller,...

  8. advanced neutron source: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    CSR Microbunching Zhirong Huang and Kwang302 Advanced Photon Source Derivation: KJK Application: ZRH Based on ZRH & KJK Main References SSY (Saldin, Schneidmiller,...

  9. advanced photonic devices: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    CSR Microbunching Zhirong Huang and Kwang302 Advanced Photon Source Derivation: KJK Application: ZRH Based on ZRH & KJK Main References SSY (Saldin, Schneidmiller,...

  10. advanced neutron sources: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    CSR Microbunching Zhirong Huang and Kwang302 Advanced Photon Source Derivation: KJK Application: ZRH Based on ZRH & KJK Main References SSY (Saldin, Schneidmiller,...

  11. 2014 Advanced Grid Modeling Program Peer Review Presentations...

    Broader source: Energy.gov (indexed) [DOE]

    Modeling Research Program leverages scientific research in mathematics for application to power system models and software tools. 17 projects were presented at the 2014 Advanced...

  12. Saft America Advanced Batteries Plant Celebrates Grand Opening...

    Energy Savers [EERE]

    Florida, factory, which will produce advanced lithium-ion batteries to power electric vehicles and other applications. Saft America estimates it will create nearly 280...

  13. Advanced Materials and Processing of Composites for High Volume...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    -- Washington D.C. lm021zaluzec2010o.pdf More Documents & Publications Advanced Materials and Processing of Composites for High Volume Applications ACC115 High Volume...

  14. Advanced Materials and Processing of Composites for High Volume...

    Broader source: Energy.gov (indexed) [DOE]

    Focal Project 4: Structural Automotive Components from Composite Materials Advanced Materials and Processing of Composites for High Volume Applications Libby Berger (General...

  15. advanced hybrid imaging: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Systems with Applications in Advanced Hybrid Electric Vehicles and Wind Farms with Battery Storage. Open Access Theses and Dissertations Summary: ??Modern hybrid electric vehicles...

  16. Advanced Methods Approach to Hybrid Powertrain Systems Optimization...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Methods Approach to Hybrid Powertrain Systems Optimization of a Transit Bus Application Advanced Methods Approach to Hybrid Powertrain Systems Optimization of a Transit Bus...

  17. advanced plutonium lmfbr: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and determine the applicability of regulatory limitations prior to use. American Society for Testing and Materials. Philadelphia 2005-01-01 52 The Advanced Manufacturing...

  18. advanced heat engines: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    project is funded by the Singapore National Research Foundation 16 Advanced Mechanical Heat Pump Technologies for Industrial Applications Texas A&M University - TxSpace Summary:...

  19. advanced heat engine: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    project is funded by the Singapore National Research Foundation 16 Advanced Mechanical Heat Pump Technologies for Industrial Applications Texas A&M University - TxSpace Summary:...

  20. DOE Issues Notice of Proposed Rulemaking for Electric Motors...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Notice of Proposed Rulemaking for Electric Motors Energy Conservation Standards DOE Issues Notice of Proposed Rulemaking for Electric Motors Energy Conservation Standards November...

  1. EERE Announces Notice of Intent to Issue Fuel Cell Technologies...

    Energy Savers [EERE]

    EERE Announces Notice of Intent to Issue Fuel Cell Technologies Incubator: Innovations in Fuel Cell and Hydrogen Fuels Technologies FOA EERE Announces Notice of Intent to Issue...

  2. Text Processing a Policy or Notice - DOE Directives, Delegations...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Processing a Policy or Notice Processing a Policy or Notice Processing an Order or Guide Canceling a Directive by Website Administrator Development from justification memorandum...

  3. Preliminary Notice of Violation,Savannah River Nuclear Solutions...

    Office of Environmental Management (EM)

    Preliminary Notice of Violation, Savannah River Nuclear Solutions, LLC - WEA-2012-04 Preliminary Notice of Violation, Savannah River Nuclear Solutions, LLC - WEA-2010-05...

  4. Energy Efficiency and Conservation Program Notice 09-001, November...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Guidance for Energy Efficiency and Conservation Block Grant Program Recipients on Formula Grants SEP Notice 10-011 EECBG Program Notice 10-013 Better Buildings Neighborhood...

  5. Electricity Advisory Committee Notice of Open Meeting September...

    Broader source: Energy.gov (indexed) [DOE]

    More Documents & Publications Federal Register Notice for March 27-28, 2014 Meeting Electricity Advisory Committee Notice of Open Meeting October 2 and 3, 2013: Federal Register...

  6. Electricity Advisory Committee Notice of Open Meeting June 16...

    Broader source: Energy.gov (indexed) [DOE]

    Register. EAC Notice of Open Meeting June 16-17, 2014 More Documents & Publications Electricity Advisory Committee Notice of Open Meeting June 5 and 6, 2013: Federal Register...

  7. Electricity Advisory Committee Meeting Notice of Open Meeting...

    Energy Savers [EERE]

    Meeting March 10, 2011: Federal Register Notice Volume 76, No. 38 - Feb. 25, 2011 Electricity Advisory Committee Meeting Notice of Open Meeting March 10, 2011: Federal Register...

  8. Electricity Advisory Committee Meeting Notice of Open Meeting...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Meeting October 29, 2010: Federal Register Notice Volume 75, No. 192 - Oct. 5, 2010 Electricity Advisory Committee Meeting Notice of Open Meeting October 29, 2010: Federal Register...

  9. Notice of Reestablishment of the Electricity Advisory Committee...

    Energy Savers [EERE]

    Reestablishment of the Electricity Advisory Committee: Federal Register Notice Volume 75, No. 135 - Jul. 15, 2010 Notice of Reestablishment of the Electricity Advisory Committee:...

  10. EIS-0455: EPA Notice of Availability of the Draft Environmental...

    Broader source: Energy.gov (indexed) [DOE]

    More Documents & Publications EIS-0404: EPA Notice of Availability of the Final Environmental Impact Statement EIS-0455: EPA Notice of Availability of the Final Environmental...

  11. EIS-0439: EPA Notice of Availability of the Final Environmental...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Final Environmental Impact Statement EIS-0439: EPA Notice of Availability of the Final Environmental Impact Statement Rice Solar Energy Project, Riverside County, CA Notice of...

  12. EIS-0403: EPA Notice of Availability of the Draft Programmatic...

    Broader source: Energy.gov (indexed) [DOE]

    Notice of Availability, Draft Environmental Impact Statement: Programmatic-Solar Energy Development in Six Southwestern States. Notice of Availability, Draft Environmental Impact...

  13. Vehicle Technologies Office Issues Notice of Intent for Medium...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Vehicle Technologies Office Issues Notice of Intent for Medium and Heavy-Duty Vehicle Demonstration Funding Opportunity Vehicle Technologies Office Issues Notice of Intent for...

  14. DOE Secretarial Notice: National Environmental Policy Act (February...

    Broader source: Energy.gov (indexed) [DOE]

    Notice: National Environmental Policy Act (February 5, 1990, status: cancelled) DOE Secretarial Notice: National Environmental Policy Act (February 5, 1990, status: cancelled) This...

  15. WEATHERIZATION PROGRAM NOTICE 10-10: REPROGRAMMING TRAINING AND...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    WEATHERIZATION PROGRAM NOTICE 10-10: REPROGRAMMING TRAINING AND TECHNICAL ASSISTANCE FUNDS TO PROGRAM OPERATIONS WEATHERIZATION PROGRAM NOTICE 10-10: REPROGRAMMING TRAINING AND...

  16. DOE Publishes Notice of Proposed Rulemaking for Residential Furnace...

    Broader source: Energy.gov (indexed) [DOE]

    Addthis Related Articles DOE Publishes Notice of Proposed Rulemaking for Residential Water Heater and Certain Commercial Water Heater Test Procedures DOE Publishes Notice of...

  17. NNSA issues Preliminary Notice of Violation to National Security...

    Office of Environmental Management (EM)

    NNSA issues Preliminary Notice of Violation to National Security Technologies, LLC, for Nuclear Safety Violations, Fact Sheet NNSA issues Preliminary Notice of Violation to...

  18. EIS-0483: EPA Notice of Availability of Draft Environmental Impact...

    Office of Environmental Management (EM)

    3: EPA Notice of Availability of Draft Environmental Impact Statement EIS-0483: EPA Notice of Availability of Draft Environmental Impact Statement Estes to Flatiron Substation...

  19. EIS-0505: EPA Notice of Availability of Supplemental Draft Environment...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    5: EPA Notice of Availability of Supplemental Draft Environmental Impact Statement EIS-0505: EPA Notice of Availability of Supplemental Draft Environmental Impact Statement...

  20. EIS-0447: DOE Notice of Availability of Draft Environmental Impact...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    DOE Notice of Availability of Draft Environmental Impact Statement EIS-0447: DOE Notice of Availability of Draft Environmental Impact Statement Champlain Hudson Power Express...

  1. EIS-0441: EPA Notice of Availability of a Draft Environmental...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    EPA Notice of Availability of a Draft Environmental Impact Statement EIS-0441: EPA Notice of Availability of a Draft Environmental Impact Statement Mohave County Wind Farm Project,...

  2. EIS-0481: EPA Notice of Availability of Draft Programmatic Environment...

    Office of Environmental Management (EM)

    EPA Notice of Availability of Draft Programmatic Environmental Impact Statement EIS-0481: EPA Notice of Availability of Draft Programmatic Environmental Impact Statement Engineered...

  3. EIS-0336: DOE Notice of Availability of the Draft Environmental...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    DOE Notice of Availability of the Draft Environmental Impact Statement and Public Hearings EIS-0336: DOE Notice of Availability of the Draft Environmental Impact Statement and...

  4. EIS-0423: DOE Notice of Availability of the Final Environmental...

    Broader source: Energy.gov (indexed) [DOE]

    28, 2011) More Documents & Publications EIS-0423-S1: DOE Notice of Availability of a Draft Supplemental Environmental Impact Statement EIS-0423: EPA Notice of...

  5. EIS-0489: FERC Notice of Availability of Draft Environmental...

    Energy Savers [EERE]

    FERC Notice of Availability of Draft Environmental Impact Statement EIS-0489: FERC Notice of Availability of Draft Environmental Impact Statement Jordan Cove Liquefaction Project...

  6. EIS-0489: EPA Notice of Availability of Draft Environmental Impact...

    Energy Savers [EERE]

    89: EPA Notice of Availability of Draft Environmental Impact Statement EIS-0489: EPA Notice of Availability of Draft Environmental Impact Statement Jordan Cove Liquefaction Project...

  7. EIS-0404: EPA Notice of Availability of the Final Environmental...

    Broader source: Energy.gov (indexed) [DOE]

    FEIS-2010.pdf More Documents & Publications EIS-0455: EPA Notice of Availability of the Draft Environmental Impact Statement EIS-0407: EPA Notice of Availability of the Final...

  8. EIS-0284: EPA Notice of Availability of the Draft Environmental...

    Energy Savers [EERE]

    EPA Notice of Availability of the Draft Environmental Impact Statement EIS-0284: EPA Notice of Availability of the Draft Environmental Impact Statement Low Emission Boiler System...

  9. EIS-0396: DOE Notice of Availability of the Draft Programmatic...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    DOE Notice of Availability of the Draft Programmatic Environmental Impact Statement EIS-0396: DOE Notice of Availability of the Draft Programmatic Environmental Impact Statement...

  10. EIS-0495: EPA Notice of Availability of Draft Environmental Impact...

    Office of Environmental Management (EM)

    EPA Notice of Availability of Draft Environmental Impact Statement EIS-0495: EPA Notice of Availability of Draft Environmental Impact Statement EIS-0495: Walla Walla Basin Spring...

  11. EIS-0481: DOE Notice of Availability of Draft Programmatic Environment...

    Energy Savers [EERE]

    DOE Notice of Availability of Draft Programmatic Environmental Impact Statement EIS-0481: DOE Notice of Availability of Draft Programmatic Environmental Impact Statement Engineered...

  12. EIS-0419: EPA Notice of Availability of the Draft Environmental...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    EPA Notice of Availability of the Draft Environmental Impact Statement EIS-0419: EPA Notice of Availability of the Draft Environmental Impact Statement Whistling Ridge Energy...

  13. EIS-0370: EPA Notice of Availability of the Final Environmental...

    Broader source: Energy.gov (indexed) [DOE]

    EPANOA-2011.pdf More Documents & Publications EIS-0440: DOE and EPA Notice of Availability of a Draft Environmental Impact Statement EIS-0440: EPA Notice of Availability of the...

  14. EIS-0357: EPA Notice of Availability of the Final Environmental...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    EPA Notice of Availability of the Final Environmental Impact Statement EIS-0357: EPA Notice of Availability of the Final Environmental Impact Statement Gilberton Coal-to-Clean...

  15. EIS-0491: EPA Notice of Availability of Draft Environmental Impact...

    Energy Savers [EERE]

    1: EPA Notice of Availability of Draft Environmental Impact Statement EIS-0491: EPA Notice of Availability of Draft Environmental Impact Statement Lake Charles Liquefaction...

  16. EIS-0426: EPA Notice of Availability of the Final Environmental...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    EPA Notice of Availability of the Final Environmental Impact Statement EIS-0426: EPA Notice of Availability of the Final Environmental Impact Statement The Environmental Protection...

  17. EA-1566: DOE Notice of Availability of the Draft Environmental...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    DOE Notice of Availability of the Draft Environmental Assessment EA-1566: DOE Notice of Availability of the Draft Environmental Assessment Proposed Infrastructure Improvements for...

  18. EIS-0421: EPA Notice of Availability of the Final Environmental...

    Broader source: Energy.gov (indexed) [DOE]

    More Documents & Publications EIS-0421EPANOA2011.pdf EIS-0424: EPA Notice of Availability of the Draft Environmental Impact Statement EIS-0486: EPA Notice of Availability of...

  19. EIS-0361: EPA Notice of Availability of the Final Environmental...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Final Environmental Impact Statement EIS-0361: EPA Notice of Availability of the Final Environmental Impact Statement Western Greenbrier Co-Production Demonstration Project Notices...

  20. EIS-0472: DOE Notice of Availability of a Draft Programmatic...

    Energy Savers [EERE]

    DOE Notice of Availability of a Draft Programmatic Environmental Impact Statement EIS-0472: DOE Notice of Availability of a Draft Programmatic Environmental Impact Statement...

  1. EIS-0444: EPA Notice of Availability of the Final Environmental...

    Broader source: Energy.gov (indexed) [DOE]

    Ector, Texas 2011-19917.pdf More Documents & Publications EIS-0375: EPA Notice of Availability of the Draft Environmental Impact Statement EIS-0487: Notices of Availability of...

  2. EIS-0441: Amended Notice of Availability of a Draft Environmental...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Amended Notice of Availability of a Draft Environmental Impact Statement EIS-0441: Amended Notice of Availability of a Draft Environmental Impact Statement Mohave County Wind Farm...

  3. EIS-0451: EPA Notice of Availability of a Draft Environmental...

    Office of Environmental Management (EM)

    1: EPA Notice of Availability of a Draft Environmental Impact Statement EIS-0451: EPA Notice of Availability of a Draft Environmental Impact Statement Hooper Springs Transmission...

  4. EIS-0444: DOE Notice of Availability of the Draft Environmental...

    Broader source: Energy.gov (indexed) [DOE]

    Notice of Availability of the Draft Environmental Impact Statement and Public Hearing Notice for the Texas Clean Energy Project, near Odessa, Ector County, Texas, DOEEIS-0444...

  5. EIS-0375: DOE Notice of Availability of the Draft Environmental...

    Office of Environmental Management (EM)

    5: DOE Notice of Availability of the Draft Environmental Impact Statement EIS-0375: DOE Notice of Availability of the Draft Environmental Impact Statement Disposal of...

  6. Notice of Availability, Federal Register, 64 FR 3492, January...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    64 FR 3492, January 22, 1999 Notice of Availability, Federal Register, 64 FR 3492, January 22, 1999 Document displays a notice of availability pertaining to the Availability of...

  7. EIS-0404: EPA Notice of Availability of the Draft Environmental...

    Broader source: Energy.gov (indexed) [DOE]

    DEIS-2009.pdf More Documents & Publications EIS-0361: EPA Notice of Availability of the Draft Environmental Impact Statement EIS-0382: EPA Notice of Availability of the Final...

  8. EIS-0336: EPA Notice of Availability of the Final Environmental...

    Office of Environmental Management (EM)

    EPA Notice of Availability of the Final Environmental Impact Statement EIS-0336: EPA Notice of Availability of the Final Environmental Impact Statement Tucson Electric Power...

  9. Energy Conservation Program: Test Procedure for Pumps, Notice...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Conservation Program: Test Procedure for Pumps, Notice of Proposed Rulemaking Energy Conservation Program: Test Procedure for Pumps, Notice of Proposed Rulemaking This document is...

  10. EA-1947: Notice of Intent to Prepare an Environmental Assessment...

    Energy Savers [EERE]

    Notice of Intent to Prepare an Environmental Assessment and Cancellation of an Environmental Impact Statement EA-1947: Notice of Intent to Prepare an Environmental Assessment and...

  11. EIS-0467: Notice of Intent to Prepare an Environmental Impact...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    and Notice of Floodplains and Wetlands Involvement Acquisition of a Natural Gas Pipeline and Natural Gas Utility Service at the Hanford Site, Richland, WA, and Notice of...

  12. Enforcement Notice of Intent to Investigate, Los Alamos National...

    Office of Environmental Management (EM)

    Los Alamos National Security, LLC Enforcement Notice of Intent to Investigate, National Security Technologies, LLC Enforcement Notice of Intent to Investigate, UT-Battelle...

  13. Preliminary Notice of Violation, Babcock & Wilcox Technical Services...

    Office of Environmental Management (EM)

    Babcock & Wilcox Technical Services Y-12, LLC - July 10, 2009 Notice of Violation, Battelle Energy Alliance, LLC - WEA-2008-01 Preliminary Notice of Violation, Battelle Energy...

  14. EIS-0481: EPA Notice of Availability of Draft Programmatic Environment...

    Energy Savers [EERE]

    481: EPA Notice of Availability of Draft Programmatic Environmental Impact Statement EIS-0481: EPA Notice of Availability of Draft Programmatic Environmental Impact Statement...

  15. EIS-0486: EPA Notice of Availability of Draft Environmental Impact...

    Energy Savers [EERE]

    486: EPA Notice of Availability of Draft Environmental Impact Statement EIS-0486: EPA Notice of Availability of Draft Environmental Impact Statement Plains & Eastern Clean Line...

  16. EIS-0496: Notice of Intent to Prepare an Environmental Impact...

    Energy Savers [EERE]

    6: Notice of Intent to Prepare an Environmental Impact Statement EIS-0496: Notice of Intent to Prepare an Environmental Impact Statement DOE's Western Area Power Administration...

  17. EIS-0481: Notice of Intent to Prepare a Programmatic Environmental...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Notice of Intent to Prepare a Programmatic Environmental Impact Statement EIS-0481: Notice of Intent to Prepare a Programmatic Environmental Impact Statement Engineered High Energy...

  18. EIS-0500: Notice of Intent to Prepare Environmental Impact Statement...

    Energy Savers [EERE]

    Notice of Intent to Prepare Environmental Impact Statement EIS-0500: Notice of Intent to Prepare Environmental Impact Statement Crystal Springs Hatchery Program; Bingham, Custer,...

  19. EIS-0481: Notice of Intent to Prepare a Programmatic Environmental...

    Energy Savers [EERE]

    81: Notice of Intent to Prepare a Programmatic Environmental Impact Statement EIS-0481: Notice of Intent to Prepare a Programmatic Environmental Impact Statement Engineered High...

  20. Federal Register Notice for Life Cycle Greenhouse Gas Perspective...

    Energy Savers [EERE]

    Federal Register Notice for Life Cycle Greenhouse Gas Perspective on Exporting Liquefied Natural Gas from the United States Federal Register Notice for Life Cycle Greenhouse Gas...

  1. Notice of Availability of Preliminary Plan for Retrospective...

    Energy Savers [EERE]

    Analysis of Existing Rules Notice of Availability of Preliminary Plan for Retrospective Analysis of Existing Rules Through this notice, the Department of Energy (DOE) announces...

  2. Enforcement Notice of Intent to Investigate, Brookhaven Science...

    Energy Savers [EERE]

    LLC More Documents & Publications Enforcement Notice of Intent to Investigate, Armor Tower, Inc. Enforcement Notice of Intent to Investigate, Construction Consultants L.I., Inc....

  3. EIS-0359: Notice of Change in National Environmental Policy ...

    Energy Savers [EERE]

    EIS-0359: Notice of Change in National Environmental Policy (NEPA) Compliance Approach Depleted Uranium Hexafluoride (DUF6) Conversion Facilities Project Notice of Change in...

  4. August 30, 2000 In Proceedings of the MC2000. An International Conference on Advanced Monte Carlo PNNL-SA-33487 for Radiation Physics, Particle Transport Simulation and Applications

    E-Print Network [OSTI]

    Duncan, James S.

    PNNL-SA-33487 for Radiation Physics, Particle Transport Simulation and Applications 23-26 October, 2000 Laboratory (PNNL) is developing new software to estimate tumor control probabilities (TCPs) using three. To improve tumor response modeling, the Pacific Northwest National Laboratory (PNNL) is developing new

  5. The Clemson University School of Materials Science and Engineering is soliciting applications and nominations for the J. E. Sirrine Textile Foundation Endowed Chair in Advanced Polymer Fibers.

    E-Print Network [OSTI]

    Bolding, M. Chad

    The Clemson University School of Materials Science and Engineering is soliciting applications and Engineering, with a distinguished track record of scholarship in polymer materials science, who can lead the efforts in the development of fundamental science and engineering of new fiber-based polymeric materials

  6. Geothermal: Advanced Search

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Advanced Search Geothermal Technologies Legacy Collection HelpFAQ | Site Map | Contact Us HomeBasic Search About Publications Advanced Search New Hot Docs News Related Links You...

  7. Institute for Software Technology Ad anced RoboticsAdvanced Robotics

    E-Print Network [OSTI]

    Interaction #12;Institute for Software Technology Application Areas Gerald Steinbauer 3 Advanced RoboticsInstitute for Software Technology Ad anced RoboticsAdvanced Robotics Human Robot Interaction Gerald Steinbauer Institute for Software Technology Gerald Steinbauer 1 Advanced Robotics ­ Human Robot Interaction

  8. Preliminary Notice of Violation, National Security Technologies...

    Office of Environmental Management (EM)

    National Security Technologies, LLC - September 26, 2014 Preliminary Notice of Violation, National Security Technologies, LLC - September 26, 2014 September 26, 2014 Security...

  9. Preliminary Notice of Violation, Brookhaven Science Associates...

    Office of Environmental Management (EM)

    Brookhaven Science Associates, LLC - WEA-2013-01 Preliminary Notice of Violation, Brookhaven Science Associates, LLC - WEA-2013-01 August 29, 2013 Issued to Brookhaven Science...

  10. Preliminary Notice of Violation, Westinghouse Savannah River...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Notice of Violation, Westinghouse Savannah River Company - EA-2000-08 Type B Accident Investigation Board Report on the September 1, 1999, Plutonium Intakes at the...

  11. Preliminary Notice of Violation, Washington Closure Hanford,...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Notice of Violation, Savannah River Nuclear Solutions, LLC - WEA-2012-04 Type B Accident Investigation At Washington Closure Hanford, LLC, Employee Fall Injury on July 1,...

  12. Preliminary Notice of Violation, Lawrence Livermore National...

    Energy Savers [EERE]

    Preliminary Notice of Violation, University of California - EA-2006-01 Type B Accident Investigation Board Report on the June 2002 High Radiation Dose to Extremities in...

  13. Preliminary Notice of Violation, Pacific Underground Construction...

    Broader source: Energy.gov (indexed) [DOE]

    Pacific Underground Construction, Inc. - WEA-2009-02 Preliminary Notice of Violation, Pacific Underground Construction, Inc. - WEA-2009-02 April 7, 2009 Issued to Pacific...

  14. Application to export electric energy OE Docket No. EA-212-C...

    Broader source: Energy.gov (indexed) [DOE]

    Documents & Publications Application to export electric energy OE Docket No. EA-210-B PPL EnergyPlus, LLC: Federal Register Notice Volume 72, No. 118 - Jun. 20, 2010 Application...

  15. Application to export electric energy OE Docket No. EA-210-B...

    Broader source: Energy.gov (indexed) [DOE]

    72, No. 118 - Jun. 20, 2010 Application to export electric energy OE Docket No. EA-210-B PPL EnergyPlus, LLC: Federal Register Notice Volume 72, No. 118 - Jun. 20, 2010 Application...

  16. Application to Export Electric Energy OE Docket No. EA-336-A...

    Broader source: Energy.gov (indexed) [DOE]

    Application from ConocoPhillips Company to export electric energy to Mexico. Federal Register Notice. EA-336-A ConocoPhillips (MX).pdf More Documents & Publications Application to...

  17. EIS-0236-S4: DOE Notice of Availability of the Draft Supplemental...

    Office of Environmental Management (EM)

    DOE Notice of Availability of the Draft Supplemental Programmatic Environmental Impact Statement and Notice of Public Hearings EIS-0236-S4: DOE Notice of Availability of the Draft...

  18. Application of reservoir characterization and advanced technology to improve recovery and economics in a lower quality Shallow Shelf Carbonate reservoir. Quarterly report, October 1, 1996--December 31, 1996

    SciTech Connect (OSTI)

    Taylor, A.R.

    1996-07-01T23:59:59.000Z

    West Welch Unit is one of four large waterflood units in the Welch field in the northwestern portion of Dawson County, Texas. The Welch Field was discovered in the early 1940`s and produces oil under a solution gas drive mechanism from the San Andres formation at approximately 4800 ft. The field has been under waterflood for 30 years and a significant portion has been infill-drilled on 20-ac density. A 1982-86 pilot CO{sub 2} injection project in the offsetting South Welch Unit yielded positive results. Recent installation of CO{sub 2} pipeline near the field allowed the phased development of a miscible CO{sub 2} injection project at the South Welch Unit. This Class 2 project concentrates on the efficient design of a miscible CO{sub 2} project based on detailed reservoir characterization from advanced petrophysics, 3-D seismic interpretations and cross wellbore tomography interpretations. During the quarter, simulation performance forecasts were made using the base geologic model. The surface seismic and wellbore data were combined to develop an improved geologic model for the simulator. Efforts to integrate the wellbore seismic results into the reservoir characterization continue. Problems with the wellbore seismic processing were traced to the processing software which is being corrected.

  19. Optimization Online - Applications — Science and Engineering ...

    E-Print Network [OSTI]

    Basic Sciences Applications Economic Impacts of Advanced Weather Forecasting on Energy System Operations Victor M. Zavala, Emil M. Constantinescu, Mihai ...

  20. Advanced thyristor valve project

    SciTech Connect (OSTI)

    Flairty, C. (General Electric Co., Malvern, PA (USA))

    1991-04-01T23:59:59.000Z

    An advanced thyristor value was developed HVDC conversion applications. New features incorporated in the design include: improved heat transfer from the thyristors, two phase cooling of components, and light firing required the development of both a separate light triggered thyristor with a full forward blocking voltage rating and a special flash lamp employing cesium vapor as the associated light source. A valve rated 133 kV and 2200 A bridge current was constructed and lab tested before shipment to the Sylmar Converter Station, which is the southern terminus of the Pacific DC Intertie. The Los Angeles Department of Water and Power, which operates the Sylmar Station, installed the valve and operated it to gain experience. 36 figs., 5 tabs.