Powered by Deep Web Technologies
Note: This page contains sample records for the topic "adjusted sampling weight" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

E-Print Network 3.0 - adjustable electric drives Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

drives Search Powered by Explorit Topic List Advanced Search Sample search results for: adjustable electric drives...

2

E-Print Network 3.0 - adjusted d-dimer cut-off Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

44 Study of the Response Function of the CUORE Bolometers towards a Neutrinoless Double Beta Decay Summary: sampling and cut-off frequency for each bolometer and adjust them...

3

E-Print Network 3.0 - adjustable red-green-blue led Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Powered by Explorit Topic List Advanced Search Sample search results for: adjustable red-green-blue led Page: << < 1 2 3 4 5 > >> 1 The Spectrum of Clean Energy Innovationinnovati...

4

E-Print Network 3.0 - age-adjusted cancer mortality Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

cancer mortality Search Powered by Explorit Topic List Advanced Search Sample search results for: age-adjusted cancer mortality Page: << < 1 2 3 4 5 > >> 1 aallll IIrreell aanndd...

5

E-Print Network 3.0 - adjusted functional principal Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Report "Recommended Detector Lifetime Adjustments" Summary: Technical Evaluation Report "Recommended Detector Lifetime Adjustments" Date: July 16, 1999... Principal...

6

E-Print Network 3.0 - adjusted correlation analysis Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

correlation: shrunken and adjusted r The coefficient of correlation is a descriptive statistic... Coefficients of Correlation, Alienation and Determination Herv Abdi1 1 Overview...

7

Adjustable virtual pore-size filter for automated sample preparation using acoustic radiation force  

SciTech Connect (OSTI)

We present a rapid and robust size-based separation method for high throughput microfluidic devices using acoustic radiation force. We developed a finite element modeling tool to predict the two-dimensional acoustic radiation force field perpendicular to the flow direction in microfluidic devices. Here we compare the results from this model with experimental parametric studies including variations of the PZT driving frequencies and voltages as well as various particle sizes and compressidensities. These experimental parametric studies also provide insight into the development of an adjustable 'virtual' pore-size filter as well as optimal operating conditions for various microparticle sizes. We demonstrated the separation of Saccharomyces cerevisiae and MS2 bacteriophage using acoustic focusing. The acoustic radiation force did not affect the MS2 viruses, and their concentration profile remained unchanged. With optimized design of our microfluidic flow system we were able to achieve yields of > 90% for the MS2 with > 80% of the S. cerevisiae being removed in this continuous-flow sample preparation device.

Jung, B; Fisher, K; Ness, K; Rose, K; Mariella, R

2008-05-22T23:59:59.000Z

8

E-Print Network 3.0 - age birth weight Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

of age we examined weight (in grams... variables from birth to age seven in a large, community-based birth cohort. A sample of white singleton... development, were assessed at...

9

E-Print Network 3.0 - adjustment testing trait Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

results for: adjustment testing trait Page: << < 1 2 3 4 5 > >> 1 cell trait? Know your sickle cell trait status. Summary: What is sickle cell trait? Know your sickle cell trait...

10

E-Print Network 3.0 - areas observed t2-weighted Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

single shot T2*-weighted spiral functional images were acquired using the manufacturer's head... Brain Areas Specific for Attentional Load in a Motion Tracking Task Jorge...

11

E-Print Network 3.0 - age height weight Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

81 Adaptations in humans for assessing physical strength from the voice Summary: and Romanian college students. Regardless of whether raters were told to assess height, weight,...

12

E-Print Network 3.0 - antipsychotic-induced weight gain Sample...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

movement disorders (AIMDs) have been collectively known as extrapyramidal syndromes (EPS... seen with typical antipsychotics (e.g., weight gain, hyperlipidemia, and...

13

E-Print Network 3.0 - antipsychotics-induced weight gain Sample...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

movement disorders (AIMDs) have been collectively known as extrapyramidal syndromes (EPS... seen with typical antipsychotics (e.g., weight gain, hyperlipidemia, and...

14

E-Print Network 3.0 - apparent molecular weight Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Behavior of Partially Miscible Blends of Linear and Branched Polyethylenes Summary: polyethylene (HDPE) of broad molecular weight distribution with a homogeneous ethylene-octene...

15

E-Print Network 3.0 - axis weight loss Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Torque Calculation with Consideration of Cross Saturation of the Interior Permanent Magnet Synchronous Motor with Summary: to bearing outer face Magnet weight Stator lamination...

16

E-Print Network 3.0 - age-dependent weight gain Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

search results for: age-dependent weight gain Page: << < 1 2 3 4 5 > >> 1 On the Political Mechanisms of the Environmental Kuznets Curve for Global Water Quality1 Summary:...

17

E-Print Network 3.0 - allied weight engineers Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Summary: Richard Arkwright's mill on Shude Hill in Manchester used a Newcomen-type steam engine to assist... . 1803 - the first table of atomic weights John Dalton revealed his...

18

E-Print Network 3.0 - annual weight gain Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

3 4 5 6 7 8 0 0.5 1 1.5 2 x 10 -3 Lag (trials) RegressionWeight... on effective Gain Landscape The optimal strategy, maximizing expected gain, requires the subject to shift... of...

19

E-Print Network 3.0 - atypical antipsychotic-induced weight Sample...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

the JAVELIN QA System Laurie S. Hiyakumoto Summary: to the weighted sum of the estimated utilities of each state comprising the belief state: EU(b) X s2STATES(b) P... of atype)....

20

Budget Adjustment Single Sided Budget Adjustment  

E-Print Network [OSTI]

Budget Adjustment & Single Sided Budget Adjustment WELCOME! #12;Accessing Kuali · Campus://busfin.colostate.edu #12;What will be covered today? · When should I use a Budget Adjustment (BA) or Single Sided Budget · Error correction · Onesided vs. singlesided entries #12;When to use a Budget Adjustment · How do I know

Stephens, Graeme L.

Note: This page contains sample records for the topic "adjusted sampling weight" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Purchased Gas Adjustment Rules (Tennessee)  

Broader source: Energy.gov [DOE]

The Purchased Gas Adjustment Rules are implemented by the Tennessee Regulatory Authority (Authority). Purchased Gas Adjustment (PGA) Rules are intended to permit the company/LDC (local gas...

22

Self adjusting inclinometer  

DOE Patents [OSTI]

An inclinometer utilizing synchronous demodulation for high resolution and electronic offset adjustment provides a wide dynamic range without any moving components. A device encompassing a tiltmeter and accompanying electronic circuitry provides quasi-leveled tilt sensors that detect highly resolved tilt change without signal saturation.

Hunter, Steven L. (Livermore, CA)

2002-01-01T23:59:59.000Z

23

Automatic temperature adjustment apparatus  

DOE Patents [OSTI]

An apparatus for increasing the efficiency of a conventional central space heating system is disclosed. The temperature of a fluid heating medium is adjusted based on a measurement of the external temperature, and a system parameter. The system parameter is periodically modified based on a closed loop process that monitors the operation of the heating system. This closed loop process provides a heating medium temperature value that is very near the optimum for energy efficiency.

Chaplin, James E. (66 Overlook Rd., Bloomingdale, NJ 07403)

1985-01-01T23:59:59.000Z

24

Precision adjustable stage  

DOE Patents [OSTI]

An improved mounting stage of the type used for the detection of laser beams is disclosed. A stage center block is mounted on each of two opposite sides by a pair of spaced ball bearing tracks which provide stability as well as simplicity. The use of the spaced ball bearing pairs in conjunction with an adjustment screw which also provides support eliminates extraneous stabilization components and permits maximization of the area of the center block laser transmission hole.

Cutburth, Ronald W. (Tracy, CA); Silva, Leonard L. (Livermore, CA)

1988-01-01T23:59:59.000Z

25

Measurement of the top quark mass at CDF using the "neutrino phi weighting" template method on a lepton plus isolated track sample  

E-Print Network [OSTI]

We present a measurement of the top quark mass with tt? dilepton events produced in pp? collisions at the Fermilab Tevatron (?s=1.96??TeV) and collected by the CDF II detector. A sample of 328 events with a charged ...

Choudalakis, Georgios

26

RELATIONSHIPS BETWEEN ZOOPLANKTON DISPLACEMENT VOLUME, WET WEIGHT, DRY WEIGHT, AND CARBONI  

E-Print Network [OSTI]

of the regression line for log transformed values for carbon vs. dry weight and wet weight vs. displacement volumeRELATIONSHIPS BETWEEN ZOOPLANKTON DISPLACEMENT VOLUME, WET WEIGHT, DRY WEIGHT, AND CARBONI PETER H are identical. We have employed this type of analysis in determinations on samples from diverse sea areas

27

Adjustable Speed Drive Industrial Applications  

E-Print Network [OSTI]

Electric motors are significant users of electricity in the United States. Approximately 66 percent of the total electricity in the U.S. is used by electric motors. Electronic adjustable speed drives (ASDs) can save energy, lower maintenance cost...

Poole, J. N.

28

Adjustable shear stress erosion and transport flume  

DOE Patents [OSTI]

A method and apparatus for measuring the total erosion rate and downstream transport of suspended and bedload sediments using an adjustable shear stress erosion and transport (ASSET) flume with a variable-depth sediment core sample. Water is forced past a variable-depth sediment core sample in a closed channel, eroding sediments, and introducing suspended and bedload sediments into the flow stream. The core sample is continuously pushed into the flow stream, while keeping the surface level with the bottom of the channel. Eroded bedload sediments are transported downstream and then gravitationally separated from the flow stream into one or more quiescent traps. The captured bedload sediments (particles and aggregates) are weighed and compared to the total mass of sediment eroded, and also to the concentration of sediments suspended in the flow stream.

Roberts, Jesse D. (Carlsbad, NM); Jepsen, Richard A. (Carlsbad, NM)

2002-01-01T23:59:59.000Z

29

Sample holder for X-ray diffractometry  

DOE Patents [OSTI]

A sample holder for use with X-ray diffractometers with the capability to rotate the sample, as well as to adjust the position of the sample in the x, y, and z directions. Adjustment in the x direction is accomplished through loosening set screws, moving a platform, and retightening the set screws. Motion translators are used for adjustment in the y and z directions. An electric motor rotates the sample, and receives power from the diffractometer.

Hesch, Victor L. (Los Alamos, NM)

1992-01-01T23:59:59.000Z

30

Improving Regulation Through Incremental Adjustment  

E-Print Network [OSTI]

at the petitioner's facility does not meet any of the criteria under which the waste was listed as hazardous. 70 The CAA contains a similar petition process for the delist ing of pollutants that Congress or EPA has designated as hazardous air pollutants?1 RCRA... adjustment provisions designed to eliminate regulatory restrictions that EPA deems unnecessary to achieve air quality objectives or that may even impair the pursuit of clean air. 79 The 1990 amendments to the statute required all states that had not yet...

Glicksman, Robert L.; Shapiro, Sidney A.

2004-03-01T23:59:59.000Z

31

Virginia Coalbed Methane Proved Reserves Adjustments (Billion...  

U.S. Energy Information Administration (EIA) Indexed Site

Adjustments (Billion Cubic Feet) Virginia Coalbed Methane Proved Reserves Adjustments (Billion Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8...

32

Arkansas Coalbed Methane Proved Reserves Adjustments (Billion...  

U.S. Energy Information Administration (EIA) Indexed Site

Adjustments (Billion Cubic Feet) Arkansas Coalbed Methane Proved Reserves Adjustments (Billion Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8...

33

Montana Coalbed Methane Proved Reserves Adjustments (Billion...  

U.S. Energy Information Administration (EIA) Indexed Site

Adjustments (Billion Cubic Feet) Montana Coalbed Methane Proved Reserves Adjustments (Billion Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8...

34

Wyoming Coalbed Methane Proved Reserves Adjustments (Billion...  

U.S. Energy Information Administration (EIA) Indexed Site

Adjustments (Billion Cubic Feet) Wyoming Coalbed Methane Proved Reserves Adjustments (Billion Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8...

35

Miscellaneous States Coalbed Methane Proved Reserves Adjustments...  

U.S. Energy Information Administration (EIA) Indexed Site

Adjustments (Billion Cubic Feet) Miscellaneous States Coalbed Methane Proved Reserves Adjustments (Billion Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6...

36

Oklahoma Coalbed Methane Proved Reserves Adjustments (Billion...  

U.S. Energy Information Administration (EIA) Indexed Site

Adjustments (Billion Cubic Feet) Oklahoma Coalbed Methane Proved Reserves Adjustments (Billion Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8...

37

Colorado Coalbed Methane Proved Reserves Adjustments (Billion...  

U.S. Energy Information Administration (EIA) Indexed Site

Adjustments (Billion Cubic Feet) Colorado Coalbed Methane Proved Reserves Adjustments (Billion Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8...

38

Pennsylvania Coalbed Methane Proved Reserves Adjustments (Billion...  

U.S. Energy Information Administration (EIA) Indexed Site

Adjustments (Billion Cubic Feet) Pennsylvania Coalbed Methane Proved Reserves Adjustments (Billion Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8...

39

atomic weight values: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

a sample of 10 100 atoms. Sumei Huang; Girish S. Agarwal 2015-01-10 3 Power laws and fractal behavior in nuclear stability, atomic weights and molecular weights Physics Websites...

40

Geographic distribution of unexplained low birth weight  

SciTech Connect (OSTI)

Low birth weight, largely in the form of intrauterine growth retardation, has been used in animal studies as a sensitive indicator of adverse reproductive outcomes to suspect toxic agents. Methodological problems have severely curtailed studies of low birth weight for human risk assessment. For white and black births, we explore the use of statistical techniques to adjust for maternal risk factors and to isolate US counties having a significantly elevated rate of unexplained low-birth-weight births in 1979. The data are derived from individual birth certificate information made available by the National Center for Health Statistics. Removing variation due to socioeconomic and other intrinsic factors available on birth certificates, clusters of high-risk counties appear. This paper discusses the methodology used to identify these counties.

Jason, C.J.; Samuhel, M.E.; Glick, B.J.; Welsh, A.K.

1986-08-01T23:59:59.000Z

Note: This page contains sample records for the topic "adjusted sampling weight" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Robust Risk Adjustment in Health Insurance  

E-Print Network [OSTI]

Aug 7, 2014 ... attacks, heart failures and pneumonia within 30 days of a patient's leaving the hospital [15]. CMS funds the VBP adjustment scheme by ...

2014-08-07T23:59:59.000Z

42

Adjustable Robust Parameter Design with Unknown Distributions  

E-Print Network [OSTI]

Mar 27, 2013 ... Adjustable Robust Parameter Design with Unknown Distributions. ihsan Yanikoglu(i.yanikoglu ***at*** uvt.nl) Dick den Hertog(d.denhertog ...

ihsan Yanikoglu

2013-03-27T23:59:59.000Z

43

Reinforcement Learning to Adjust Robot Movements to New Situations MPI Tbingen, Germany  

E-Print Network [OSTI]

, namely a kernelized version of the reward-weighted regres- sion. We show two robot applications and Peters, 2010], and even in tasks with potential industrial applications [Urbanek et al., 2004Reinforcement Learning to Adjust Robot Movements to New Situations Jens Kober MPI Tübingen, Germany

44

Abstract--This paper describes an approach for choosing and updating measurement weights used in weighted least squares  

E-Print Network [OSTI]

1 Abstract--This paper describes an approach for choosing and updating measurement weights used adjusted to tune the residual based error detection tests. While these approaches may work for most systems of user inter- This work was supported in part by the NSF/PSERC. S. Zhong is a graduate student

45

Equity Mispricing and Leverage Adjustment Costs  

E-Print Network [OSTI]

We find that equity mispricing impacts the speed at which firms adjust to their target leverage (TL) and does so in predictable ways depending on whether the firm is over- or underlevered. For example, firms that are above ...

Warr, Richard S.; Elliott, William B.; Koeter-Kant, Johanna; Ö ztekin, Ö zde

2012-06-01T23:59:59.000Z

46

Design and Fabrication of Ultralight Weight, Adjustable Multi-electrode Probes for Electrophysiological Recordings in Mice  

E-Print Network [OSTI]

The number of physiological investigations in the mouse, mus musculus, has experienced a recent surge, paralleling the growth in methods of genetic targeting for microcircuit dissection and disease modeling. The introduction ...

Brunetti, Philip M.

47

Light weight phosphate cements  

DOE Patents [OSTI]

A sealant having a specific gravity in the range of from about 0.7 to about 1.6 for heavy oil and/or coal bed methane fields is disclosed. The sealant has a binder including an oxide or hydroxide of Al or of Fe and a phosphoric acid solution. The binder may have MgO or an oxide of Fe and/or an acid phosphate. The binder is present from about 20 to about 50% by weight of the sealant with a lightweight additive present in the range of from about 1 to about 10% by weight of said sealant, a filler, and water sufficient to provide chemically bound water present in the range of from about 9 to about 36% by weight of the sealant when set. A porous ceramic is also disclosed.

Wagh, Arun S. (Naperville, IL); Natarajan, Ramkumar, (Woodridge, IL); Kahn, David (Miami, FL)

2010-03-09T23:59:59.000Z

48

Generalized constructive tree weights  

SciTech Connect (OSTI)

The Loop Vertex Expansion (LVE) is a quantum field theory (QFT) method which explicitly computes the Borel sum of Feynman perturbation series. This LVE relies in a crucial way on symmetric tree weights which define a measure on the set of spanning trees of any connected graph. In this paper we generalize this method by defining new tree weights. They depend on the choice of a partition of a set of vertices of the graph, and when the partition is non-trivial, they are no longer symmetric under permutation of vertices. Nevertheless we prove they have the required positivity property to lead to a convergent LVE; in fact we formulate this positivity property precisely for the first time. Our generalized tree weights are inspired by the Brydges-Battle-Federbush work on cluster expansions and could be particularly suited to the computation of connected functions in QFT. Several concrete examples are explicitly given.

Rivasseau, Vincent, E-mail: vincent.rivasseau@th.u-psud.fr, E-mail: adrian.tanasa@ens-lyon.org [LPT, CNRS UMR 8627, Univ. Paris 11, 91405 Orsay Cedex, France and Perimeter Institute for Theoretical Physics, 31 Caroline St. N, Ontario N2L 2Y5, Waterloo (Canada)] [LPT, CNRS UMR 8627, Univ. Paris 11, 91405 Orsay Cedex, France and Perimeter Institute for Theoretical Physics, 31 Caroline St. N, Ontario N2L 2Y5, Waterloo (Canada); Tanasa, Adrian, E-mail: vincent.rivasseau@th.u-psud.fr, E-mail: adrian.tanasa@ens-lyon.org [Université Paris 13, Sorbonne Paris Cité, 99, Avenue Jean-Baptiste Clément LIPN, Institut Galilée, CNRS UMR 7030, F-93430 Villetaneuse, France and Horia Hulubei National Institute for Physics and Nuclear Engineering, P.O.B. MG-6, 077125 Magurele (Romania)] [Université Paris 13, Sorbonne Paris Cité, 99, Avenue Jean-Baptiste Clément LIPN, Institut Galilée, CNRS UMR 7030, F-93430 Villetaneuse, France and Horia Hulubei National Institute for Physics and Nuclear Engineering, P.O.B. MG-6, 077125 Magurele (Romania)

2014-04-15T23:59:59.000Z

49

Weighted control systems  

E-Print Network [OSTI]

) 50 3-10 Defects per Unit Control Charts (Sudden Increase in Number of Defects) 51 3-11 Defects per Unit Control Charts (Slow Increase in Number of Defects) 52 3-12 O. C. Curves of Fraction Defectives Control Charts. 54 3-13 O. C. Curves.... The exponential smoothing principle was introduced to quality control field in 1959. It was first adapted in the mean control chart [25]. Through this control system, the most recent information is weighted and combined with the weighted past observations. 10...

Al-Radhi, Adhi Omar

1974-01-01T23:59:59.000Z

50

Cost of Gas Adjustment for Gas Utilities (Maine)  

Broader source: Energy.gov [DOE]

This rule, applicable to gas utilities, establishes rules for calculation of gas cost adjustments, procedures to be followed in establishing gas cost adjustments and refunds, and describes reports...

51

Adjusting the Thermometer of Race Relations: Physical Warmth Reduces Bias  

E-Print Network [OSTI]

Semin, G. R. (2009). The thermometer of social relations:Adjusting the Thermometer of Race Relations: Physical Warmth2012 Adjusting the Thermometer of Race Relations: Physical

Breines, Juliana

2012-01-01T23:59:59.000Z

52

Adjustable speed drive for residential applications  

SciTech Connect (OSTI)

This paper describes a demonstration of an adjustable speed drive suitable for use in residential applications such as compressors and fans in heat pumps, air conditioners, and refrigerators. The adjustable speed drive uses only a four-diode rectifier and a six-transistor six-diode inverter and does not require a source-frequency filter inductor or capacitor. Motor speed is adjusted with source-frequency phase control eliminating the switching loss and electromagnetic interference caused by the more commonly used high-frequency pulse-width modulation. Low source-current distortion and high power factor are obtained at a full-load operating point which is found using a parametric analysis.

Jungreis, A.M.; Kelley, A.W. [North Carolina State Univ., Raleigh, NC (United States). Dept. of Electrical and Computer Engineering] [North Carolina State Univ., Raleigh, NC (United States). Dept. of Electrical and Computer Engineering

1995-11-01T23:59:59.000Z

53

Investigation of Rheological Impacts on Sludge Batch 3 as Insoluble Solids and Wash Endpoints are Adjusted  

SciTech Connect (OSTI)

The Defense Waste Processing Facility (DWPF) is currently processing and immobilizing radioactive sludge slurry into a durable borosilicate glass. The DWPF has already processed three sludge batches (Sludge Batch 1A, Sludge Batch 1B, and Sludge Batch 2) and is currently processing the fourth sludge batch (Sludge Batch 3). A sludge batch is defined as a single tank of sludge slurry or a combination of sludge slurries from different tanks that has been or will be qualified before being transferred to DWPF. As a part of the Sludge Batch 3 (SB3) qualification task, rheology measurements of the sludge slurry were requested at different insoluble solids loadings. These measurements were requested in order to gain insight into potential processing problems that may occur as the insoluble solids are adjusted up or down (by concentration or dilution) during the process. As a part of this study, a portion of the ''as received'' SB3 sample was washed with inhibited water (0.015 M NaOH and 0.015 M NaNO2) to target 0.5M Na versus a measured 1M Na in the supernate. The purpose of the ''washing'' step was to allow a comparison of the SB3 rheological data to the rheological data collected for Sludge Batch 2 (SB2) and to determine if there was a dependence of the yield stress and consistency as a function of washing. The ''as received'' SB3 rheology data was also compared to SB3 simulants prepared by the Simulant Development Program in order to provide guidance for selecting a simulant that is more representative of the rheological properties of the radioactive sludge slurry. A summary of the observations, conclusions are: (1) The yield stress and plastic viscosity increased as the weight percent insoluble solids were increased for the ''as received'' and ''washed'' SB3 samples, at a fixed pH. (2) For the same insoluble solids loading, the yield stress for the SB2 sample is approximately a factor of three higher than the ''as received'' SB3 sample. There also appears to be small difference in the plastic viscosity. This difference is probably due to the different Na concentrations of the slurries. (3) The yield stress for the SB2 sample at 17.5 wt. % insoluble solids loading is four times higher than the ''washed'' SB3 sample at 16.5 wt. % insoluble solids. There also appears to be small difference in the plastic viscosity. The differences for the yield stress and consistency can be explained by the differences in the Fe and Na concentrations of the sludge slurry and the anion concentrations of the resulting supernates. (4) The rheological properties (i.e. yield stress and plastic viscosity), as the insoluble solids are adjusted, for the ''as received'' and ''washed'' SB3 samples are different. The plastic viscosity curve for the ''as received'' SB3 sample was higher than the plastic viscosity curve for SB3 ''washed'' sample. The yield stress curve for the ''washed'' SB3 sample is slightly lower than the ''as received'' SB3 sample up until {approx}19 wt. % insoluble solids. The ''washed'' SB3 sample then exceeds the yield stress curve for the ''as received'' SB3 sample. This rheological behavior is probably due to the difference in the Na concentration of the supernate for the samples. (5) No unusual behavior, such as air entrainment, was noted for the ''as received'' SB3 sample. (6) The observed physical properties of the SB3 sample changed after washing. The ''washed'' SB3 sample entrained air readily at higher insoluble solids loadings (i.e. 14.1, 16.5, 19.5 wt. %) as it did for SB2. The air entrainment appeared to dissipate for the SB3 sample at the lower insoluble solids loadings (i.e. 9.7 and 11.7 wt. %). (7) The physical behavior of SB3 can be influenced by controlling the Na concentration in the supernate and the wt. % insoluble solids. The cause for the air entrainment in the ''washed'' SB3 sample could be due to a change in the particle size during the washing step. (8) The SB3 simulants prepared for the Simulant Development Program were approximately a factor of 1.6 to 4 times higher for yield stress and 2.6 to 4 times higher

Fellinger, T. L.

2005-07-12T23:59:59.000Z

54

Object Exploration By Purposive, Dynamic Viewpoint Adjustment  

E-Print Network [OSTI]

. Unlike previous approaches where exploration is cast as a discrete process (i.e., asking where to look on the object surface that are occluded when the exploration process is initiated. Our goal is to designObject Exploration By Purposive, Dynamic Viewpoint Adjustment Kiriakos N. Kutulakos Charles R. Dyer

Dyer, Charles R.

55

Weighted Parametric Operational Hydrology Forecasting Thomas E. Croley II1  

E-Print Network [OSTI]

1 Weighted Parametric Operational Hydrology Forecasting Thomas E. Croley II1 1 Great Lakes forecasts in operational hydrology builds a sample of possibilities for the future, of climate series from-parametric method can be extended into a new weighted parametric hydrological forecasting technique to allow

56

The weighted words collector  

E-Print Network [OSTI]

Motivated by applications in bioinformatics, we consider the word collector problem, i.e. the expected number of calls to a random weighted generator of words of length $n$ before the full collection is obtained. The originality of this instance of the non-uniform coupon collector lies in the, potentially large, multiplicity of the words/coupons of a given probability/composition. We obtain a general theorem that gives an asymptotic equivalent for the expected waiting time of a general version of the Coupon Collector. This theorem is especially well-suited for classes of coupons featuring high multiplicities. Its application to a given language essentially necessitates some knowledge on the number of words of a given composition/probability. We illustrate the application of our theorem, in a step-by-step fashion, on three exemplary languages, revealing asymptotic regimes in $\\Theta(\\mu(n)\\cdot n)$ and $\\Theta(\\mu(n)\\cdot \\log n)$, where $\\mu(n)$ is the sum of weights over words of length $n$.

Boisberranger, Jérémie Du; Ponty, Yann

2012-01-01T23:59:59.000Z

57

Hamilton Weights and Petersen Minors  

E-Print Network [OSTI]

Hamilton Weights and Petersen Minors Hong-Jian Lai and Cun-Quan Zhangy DEPARTMENT OF MATHEMATICS@math.wvu.edu Received April 18, 1997 Abstract: A (1, 2)-eulerian weight w of a cubic graph is called a Hamilton weight if every faithful circuit cover of the graph with respect to w is a set of two Hamilton circuits. Let G

Lai, Hong-jian

58

Article mounting and position adjustment stage  

DOE Patents [OSTI]

An improved adjustment and mounting stage of the type used for the detection of laser beams is disclosed. A ring sensor holder has locating pins on a first side thereof which are positioned within a linear keyway in a surrounding housing for permitting reciprocal movement of the ring along the keyway. A rotatable ring gear is positioned within the housing on the other side of the ring from the linear keyway and includes an oval keyway which drives the ring along the linear keyway upon rotation of the gear. Motor-driven single-stage and dual (x, y) stage adjustment systems are disclosed which are of compact construction and include a large laser transmission hole. 6 figs.

Cutburth, R.W.; Silva, L.L.

1988-05-10T23:59:59.000Z

59

Article mounting and position adjustment stage  

DOE Patents [OSTI]

An improved adjustment and mounting stage of the type used for the detection of laser beams is disclosed. A ring sensor holder has locating pins on a first side thereof which are positioned within a linear keyway in a surrounding housing for permitting reciprocal movement of the ring along the keyway. A rotatable ring gear is positioned within the housing on the other side of the ring from the linear keyway and includes an oval keyway which drives the ring along the linear keyway upon rotation of the gear. Motor-driven single-stage and dual (x, y) stage adjustment systems are disclosed which are of compact construction and include a large laser transmission hole.

Cutburth, Ronald W. (Tracy, CA); Silva, Leonard L. (Livermore, CA)

1988-01-01T23:59:59.000Z

60

Remote control for anode-cathode adjustment  

DOE Patents [OSTI]

An apparatus for remotely adjusting the anode-cathode gap in a pulse power machine has an electric motor located within a hollow cathode inside the vacuum chamber of the pulse power machine. Input information for controlling the motor for adjusting the anode-cathode gap is fed into the apparatus using optical waveguides. The motor, controlled by the input information, drives a worm gear that moves a cathode tip. When the motor drives in one rotational direction, the cathode is moved toward the anode and the size of the anode-cathode gap is diminished. When the motor drives in the other direction, the cathode is moved away from the anode and the size of the anode-cathode gap is increased. The motor is powered by batteries housed in the hollow cathode. The batteries may be rechargeable, and they may be recharged by a photovoltaic cell in combination with an optical waveguide that receives recharging energy from outside the hollow cathode. Alternatively, the anode-cathode gap can be remotely adjusted by a manually-turned handle connected to mechanical linkage which is connected to a jack assembly. The jack assembly converts rotational motion of the handle and mechanical linkage to linear motion of the cathode moving toward or away from the anode.

Roose, Lars D. (Albuquerque, NM)

1991-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "adjusted sampling weight" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Adjustable expandable cryogenic piston and ring  

DOE Patents [OSTI]

The operation of a reciprocating expansion engine for cryogenic refrigeration is improved by changing the pistons and rings so that the piston can be operated from outside the engine to vary the groove in which the piston ring is located. This causes the ring, which is of a flexible material, to be squeezed so that its contact with the wall is subject to external control. This control may be made manually or it may be made automatically in response to instruments that sense the amount of blow-by of the cryogenic fluid and adjust for an optimum blow-by.

Mazur, Peter O. (Aurora, IL); Pallaver, Carl B. (Woodridge, IL)

1980-01-01T23:59:59.000Z

62

New Mexico Coalbed Methane Proved Reserves Adjustments (Billion...  

U.S. Energy Information Administration (EIA) Indexed Site

Adjustments (Billion Cubic Feet) New Mexico Coalbed Methane Proved Reserves Adjustments (Billion Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8...

63

West Virginia Coalbed Methane Proved Reserves Adjustments (Billion...  

U.S. Energy Information Administration (EIA) Indexed Site

Adjustments (Billion Cubic Feet) West Virginia Coalbed Methane Proved Reserves Adjustments (Billion Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7...

64

Kansas Coalbed Methane Proved Reserves Adjustments (Billion Cubic...  

U.S. Energy Information Administration (EIA) Indexed Site

Adjustments (Billion Cubic Feet) Kansas Coalbed Methane Proved Reserves Adjustments (Billion Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8...

65

Utah Coalbed Methane Proved Reserves Adjustments (Billion Cubic...  

U.S. Energy Information Administration (EIA) Indexed Site

Adjustments (Billion Cubic Feet) Utah Coalbed Methane Proved Reserves Adjustments (Billion Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9...

66

Rigid or flexible accounting rules? : evidence from purchase price adjustments  

E-Print Network [OSTI]

I examine the negotiation of accounting rules in the purchase price adjustment clause of corporate acquisition agreements. Purchase price adjustments make the deal value contingent on the target's closing working capital ...

Johnson, Derek Christopher

2011-01-01T23:59:59.000Z

67

adjusted clinical groups: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

status, psychiatric symptomatology, various family variables, psychosocial adjustment and knowledge of illness, medication, stress management and problem-solving skills......

68

adjusted clinical group: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

status, psychiatric symptomatology, various family variables, psychosocial adjustment and knowledge of illness, medication, stress management and problem-solving skills......

69

Self-adjusting magnetic bearing systems  

DOE Patents [OSTI]

A self-adjusting magnetic bearing automatically adjusts the parameters of an axially unstable magnetic bearing such that its force balance is maintained near the point of metastable equilibrium. Complete stabilization can be obtained with the application of weak restoring forces either from a mechanical bearing (running at near-zero load, thus with reduced wear) or from the action of residual eddy currents in a snubber bearing. In one embodiment, a torque is generated by the approach of a slotted pole to a conducting plate. The torque actuates an assembly which varies the position of a magnetic shunt to change the force exerted by the bearing. Another embodiment achieves axial stabilization by sensing vertical displacements in a suspended bearing element, and using this information in an electrical servo system. In a third embodiment, as a rotating eddy current exciter approaches a stationary bearing, it heats a thermostat which actuates an assembly to weaken the attractive force between the two bearing elements. An improved version of an electromechanical battery utilizing the designs of the various embodiments is described. 7 figs.

Post, R.F.

1998-07-21T23:59:59.000Z

70

Self-adjusting magnetic bearing systems  

DOE Patents [OSTI]

A self-adjusting magnetic bearing automatically adjusts the parameters of an axially unstable magnetic bearing such that its force balance is maintained near the point of metastable equilibrium. Complete stabilization can be obtained with the application of weak restoring forces either from a mechanical bearing (running at near-zero load, thus with reduced wear) or from the action of residual eddy currents in a snubber bearing. In one embodiment, a torque is generated by the approach of a slotted pole to a conducting plate. The torque actuates an assembly which varies the position of a magnetic shunt to change the force exerted by the bearing. Another embodiment achieves axial stabilization by sensing vertical displacements in a suspended bearing element, and using this information in an electrical servo system. In a third embodiment, as a rotating eddy current exciter approaches a stationary bearing, it heats a thermostat which actuates an assembly to weaken the attractive force between the two bearing elements. An improved version of an electromechanical battery utilizing the designs of the various embodiments is described.

Post, Richard F. (Walnut Creek, CA)

1998-01-01T23:59:59.000Z

71

Weighted likelihood estimation under two-phase sampling  

E-Print Network [OSTI]

University of Washington Seattle, WA 98195-7232 e-mail: tsaegusa@uw.edu and Jon A. Wellner Department

Washington at Seattle, University of

72

Elliptically polarizing adjustable phase insertion device  

DOE Patents [OSTI]

An insertion device for extracting polarized electromagnetic energy from a beam of particles is disclosed. The insertion device includes four linear arrays of magnets which are aligned with the particle beam. The magnetic field strength to which the particles are subjected is adjusted by altering the relative alignment of the arrays in a direction parallel to that of the particle beam. Both the energy and polarization of the extracted energy may be varied by moving the relevant arrays parallel to the beam direction. The present invention requires a substantially simpler and more economical superstructure than insertion devices in which the magnetic field strength is altered by changing the gap between arrays of magnets. 3 figures.

Carr, R.

1995-01-17T23:59:59.000Z

73

Remote adjustable focus Raman spectroscopy probe  

DOE Patents [OSTI]

A remote adjustable focus Raman spectroscopy probe allows for analyzing Raman scattered light from a point of interest external probe. An environmental barrier including at least one window separates the probe from the point of interest. An optical tube is disposed adjacent to the environmental barrier and includes a long working length compound lens objective next to the window. A beam splitter and a mirror are at the other end. A mechanical means is used to translated the prove body in the X, Y, and Z directions resulting in a variable focus optical apparatus. Laser light is reflected by the beam splitter and directed toward the compound lens objective, then through the window and focused on the point of interest. Raman scattered light is then collected by the compound lens objective and directed through the beam splitter to a mirror. A device for analyzing the light, such as a monochrometer, is coupled to the mirror.

Schmucker, John E. (Hurt, VA); Blasi, Raymond J. (Harrison City, PA); Archer, William B. (Bethel Park, PA)

1999-01-01T23:59:59.000Z

74

Permanent magnet multipole with adjustable strength  

DOE Patents [OSTI]

Two or more magnetically soft pole pieces are symmetrically positioned along a longitudinal axis to provide a magnetic field within a space defined by the pole pieces. Two or more permanent magnets are mounted to an external magnetically-soft cylindrical sleeve which rotates to bring the permanent magnets into closer coupling with the pole pieces and thereby adjustably control the field strength of the magnetic field produced in the space defined by the pole pieces. The permanent magnets are preferably formed of rare earth cobalt (REC) material which has a high remanent magnetic field and a strong coercive force. The pole pieces and the permanent magnets have corresponding cylindrical surfaces which are positionable with respect to each other to vary the coupling therebetween. Auxiliary permanent magnets are provided between the pole pieces to provide additional magnetic flux to the magnetic field without saturating the pole pieces.

Halbach, Klaus (Berkeley, CA)

1985-01-01T23:59:59.000Z

75

Permanent-magnet multipole with adjustable strength  

DOE Patents [OSTI]

Two or more magnetically soft pole pieces are symmetrically positioned along a longitudinal axis to provide a magnetic field within a space defined by the pole pieces. Two or more permanent magnets are mounted to an external magnetically-soft cylindrical sleeve which rotates to bring the permanent magnets into closer coupling with the pole pieces and thereby adjustably control the field strength of the magnetic field produced in the space defined by the pole pieces. The permanent magnets are preferably formed of rare earth cobalt (REC) material which has a high remanent magnetic field and a strong coercive force. The pole pieces and the permanent magnets have corresponding cylindrical surfaces which are positionable with respect to each other to vary the coupling there between. Auxiliary permanent magnets are provided between the pole pieces to provide additional magnetic flux to the magnetic field without saturating the pole pieces.

Halbach, K.

1982-09-20T23:59:59.000Z

76

Scheme for rapid adjustment of network impedance  

DOE Patents [OSTI]

A static controlled reactance device is inserted in series with an AC electric power transmission line to adjust its transfer impedance. An inductor (reactor) is serially connected with two back-to-back connected thyristors which control the conduction period and hence the effective reactance of the inductor. Additional reactive elements are provided in parallel with the thyristor controlled reactor to filter harmonics and to obtain required range of variable reactance. Alternatively, the static controlled reactance device discussed above may be connected to the secondary winding of a series transformer having its primary winding connected in series to the transmission line. In a three phase transmission system, the controlled reactance device may be connected in delta configuration on the secondary side of the series transformer to eliminate triplen harmonics.

Vithayathil, John J. (3814 NE. 136th Pl., Portland, OR 97230)

1991-01-01T23:59:59.000Z

77

,"New York Dry Natural Gas Reserves Adjustments (Billion Cubic...  

U.S. Energy Information Administration (EIA) Indexed Site

Name","Description"," Of Series","Frequency","Latest Data for" ,"Data 1","New York Dry Natural Gas Reserves Adjustments (Billion Cubic Feet)",1,"Annual",2013 ,"Release...

78

Ohio Coalbed Methane Proved Reserves Adjustments (Billion Cubic...  

U.S. Energy Information Administration (EIA) Indexed Site

Available; W Withheld to avoid disclosure of individual company data. Release Date: 1242014 Next Release Date: 12312015 Referring Pages: Coalbed Methane Reserves Adjustments...

79

,"U.S. Coalbed Methane Proved Reserves Adjustments (Billion Cubic...  

U.S. Energy Information Administration (EIA) Indexed Site

Name","Description"," Of Series","Frequency","Latest Data for" ,"Data 1","U.S. Coalbed Methane Proved Reserves Adjustments (Billion Cubic Feet)",1,"Annual",2013...

80

Optimization Online - Robust risk adjustment in health insurance  

E-Print Network [OSTI]

Aug 8, 2014 ... Abstract: Risk adjustment is used to calibrate payments to health plans based on the relative health status of insured populations and helps ...

Tengjiao Xiao

2014-08-08T23:59:59.000Z

Note: This page contains sample records for the topic "adjusted sampling weight" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Molecular weight and molecular weight distribution of kraft lignins  

SciTech Connect (OSTI)

Kraft lignins are the lignin degradation products from kraft pulping. They are complex, heterogeneous polymers with some polar character. The molecular weight of kraft lignins greatly affect the physical properties of black liquors, and are of primary importance in separation from black liquor and in evaluating potential uses. Several purified kraft lignins from slash pine were analyzed for number average molecular weight by vapor pressure osmometry (VPO), for weight average molecular weight by low angle laser light scattering (LALLS), and for the molecular weight distribution by high temperature size exclusion chromatography (SEC). The lignins were run in tetrahydrofuran (THF), N,N-dimethyl formamide (DMF), DMF with 0.1M LiBr, and pyridine at conditions above the Theta temperature. Experimental methods are discussed. The results show that VPO may be used to determine M[sub n] for kraft lignins if the purity of the lignins and the identity of the impurities are known. LALLS can be used to determine M[sub w] for kraft lignins if measurements are made at or above the Theta temperature of the lignin-solvent pair. SEC should be used at temperatures at, or above, the Theta temperature of the lignin-solvent pair. Size separation is highly dependent on the solvent used, and DMF is a much better solvent than THF for high temperature SEC. Future work using moment resolution procedures to derive an accurate calibration curve are also discussed.

Schmidl, W.; Dong, D.; Fricke, A.L. (Univ. of Florida, Gainesville, FL (United States))

1990-01-01T23:59:59.000Z

82

Weighted Watson-Crick automata  

SciTech Connect (OSTI)

There are tremendous works in biotechnology especially in area of DNA molecules. The computer society is attempting to develop smaller computing devices through computational models which are based on the operations performed on the DNA molecules. A Watson-Crick automaton, a theoretical model for DNA based computation, has two reading heads, and works on double-stranded sequences of the input related by a complementarity relation similar with the Watson-Crick complementarity of DNA nucleotides. Over the time, several variants of Watson-Crick automata have been introduced and investigated. However, they cannot be used as suitable DNA based computational models for molecular stochastic processes and fuzzy processes that are related to important practical problems such as molecular parsing, gene disease detection, and food authentication. In this paper we define new variants of Watson-Crick automata, called weighted Watson-Crick automata, developing theoretical models for molecular stochastic and fuzzy processes. We define weighted Watson-Crick automata adapting weight restriction mechanisms associated with formal grammars and automata. We also study the generative capacities of weighted Watson-Crick automata, including probabilistic and fuzzy variants. We show that weighted variants of Watson-Crick automata increase their generative power.

Tamrin, Mohd Izzuddin Mohd [Department of Information System, Kulliyyah of Information and Communication Technology, International Islamic University Malaysia, 50728 Gombak, Selangor (Malaysia); Turaev, Sherzod; Sembok, Tengku Mohd Tengku [Department of Computer Science, Kulliyyah of Information and Communication Technology, International Islamic University Malaysia, 50728 Gombak, Selangor (Malaysia)

2014-07-10T23:59:59.000Z

83

E-Print Network 3.0 - american cancer survivors Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Powered by Explorit Topic List Advanced Search Sample search results for: american cancer survivors Page: << < 1 2 3 4 5 > >> 1 Psychosocial Adjustment Among Cancer Survivors:...

84

Risk adjusted control charts for health care Willem Albers  

E-Print Network [OSTI]

)) strongly suggest to apply SPC methods, in particular control charts, and we shall follow that line hereRisk adjusted control charts for health care monitoring Willem Albers Department of Applied membership can be used to adjust the basic negative binomial charts to the actual risk incurred. Attention

Al Hanbali, Ahmad

85

Would Border Carbon Adjustments prevent carbon leakage and heavy industry  

E-Print Network [OSTI]

No 52-2013 Would Border Carbon Adjustments prevent carbon leakage and heavy industry halshs-00870689,version1-7Oct2013 #12;Would Border Carbon Adjustments prevent carbon leakage and heavy The efficiency of unilateral climate policies may be hampered by carbon leakage and competitiveness losses

Paris-Sud XI, Université de

86

Wage adjustment, competitiveness and unemployment East Germany after unification  

E-Print Network [OSTI]

Wage adjustment, competitiveness and unemployment ­ East Germany after unification Werner Smolny years after unification large differences of the labor market situation in East and West Germany persist adjustment in East Germany and the resulting development of competitiveness and unemployment differentials

Pfeifer, Holger

87

CSEM WP 120 Asymmetric Price Adjustment and Consumer Search  

E-Print Network [OSTI]

CSEM WP 120 Asymmetric Price Adjustment and Consumer Search: An Examination of the Retail Gasoline of Economics November 13, 2003 Abstract It has been documented that retail gasoline prices respond more quickly theoretical model of asymmetric adjustment that empiri- cally matches observed retail gasoline price behavior

California at Berkeley. University of

88

Comparison of the accuracy of two methods of adjusting weaning weights of lambs to a constant age  

E-Print Network [OSTI]

? at ~ 05 level L?S?D? ca 11?6 5?? 11 ?7? 0 IV, Between linea Line 1 Line 2 I. ine3 L!ns 4 Line 9 Lin? 10 Line Line Line Line Line Line 1 0 3? 2 0 4 9 10 l?7 5 ~ 1 0 7 ~ 3 ?7 2?3 10?7 2?7 5?7 5 ~ 6 2, 4 ~ 6 0 8 5 0 3 0 L?S?D?at ?01...

Ragsdale, Bobby Joe

1957-01-01T23:59:59.000Z

89

An asset-pricing view of external adjustment  

E-Print Network [OSTI]

Recent literature has argued that conventional measures of external sustainability – the trade balance and current account – are misleading because they omit capital gains on net foreign asset positions. We adjust the ...

Pavlova, Anna

90

Ihsan Yaniko No. 2013-022 ADJUSTABLE ROBUST PARAMETER ...  

E-Print Network [OSTI]

Mar 21, 2013 ... may be performed with either real or simulated systems; we focus on simulation .... Examples are the adjustment of several controllable chemical process ...... problems, we use KNITRO 8.0 embedded in MATLAB (2012a) and.

BruijnC

2013-03-21T23:59:59.000Z

91

Support assembly having three dimension position adjustment capabilities  

DOE Patents [OSTI]

An assembly for supporting an apparatus such as a microscope or laser to and against a planer surface is disclosed herein. This apparatus includes three specific arrangements for adjusting the positions of three segments of the apparatus so as to adjust the position of the overall apparatus with respect to the planer surface in the x-, y- and z-directions, where the x-direction and the y-direction are both parallel with the planer surface and perpendicular to one another and where the z-direction is perpendicular to the planer surface and the x- and y-directions. Each of two of the three arrangements includes its own means for providing x-, y- and z-adjustments (which includes rotation in the x, y plane) while it is only necessary for the third arrangement to provide adjustments in the z-direction.

Cutburth, R.W.; House, F.A.

1985-11-08T23:59:59.000Z

92

The Impact of Border Carbon Adjustments under Alternative Producer Responses  

E-Print Network [OSTI]

Border carbon adjustments (BCAs) have been proposed to address leakage and competitiveness concerns. In traditional assessments, firms regard BCAs as output taxes rather than implicit emissions taxes. Using a stylized ...

Winchester, Niven

93

Method for preparing membranes with adjustable separation performance  

DOE Patents [OSTI]

Methods for adjustable separation of solutes and solvents involve the combination of the use of a maximally swollen membrane and subsequent vacuum depressurization exerted on the permeate side of that membrane. By adjusting the extent of depressurization it is possible to separate solvent from solutes and solutes from each other. Improved control of separation parameters as well as improved flux rates characterize the present invention. 2 figs.

Peterson, E.S.; Orme, C.J.; Stone, M.L.

1995-01-31T23:59:59.000Z

94

Apparatus and methods for installing, removing and adjusting an inner turbine shell section relative to an outer turbine shell section  

DOE Patents [OSTI]

A turbine includes upper and lower inner shell sections mounting the nozzles and shrouds and which inner shell is supported by pins secured to a surrounding outer shell. To disassemble the turbine for access to the inner shell sections and rotor, an alignment fixture is secured to the lower outer shell section and has pins engaging the inner shell section. To disassemble the turbine, the inner shell weight is transferred to the lower outer shell section via the alignment fixture and cradle pins. Roller assemblies are inserted through access openings vacated by support pins to permit rotation of the lower inner shell section out of and into the lower outer shell section during disassembly and assembly. The alignment fixture includes adjusting rods for adjusting the inner shell axially, vertically, laterally and about a lateral axis. A roller over-cage is provided to rotate the inner shell and a dummy shell to facilitate assembly and disassembly in the field.

Leach, David (Niskayuna, NY); Bergendahl, Peter Allen (Scotia, NY); Waldo, Stuart Forrest (Salem, NC); Smith, Robert Leroy (Milford, OH); Phelps, Robert Kim (Milford, OH)

2001-01-01T23:59:59.000Z

95

Method, system and apparatus for monitoring and adjusting the quality of indoor air  

DOE Patents [OSTI]

A system, method and apparatus is provided for monitoring and adjusting the quality of indoor air. A sensor array senses an air sample from the indoor air and analyzes the air sample to obtain signatures representative of contaminants in the air sample. When the level or type of contaminant poses a threat or hazard to the occupants, the present invention takes corrective actions which may include introducing additional fresh air. The corrective actions taken are intended to promote overall health of personnel, prevent personnel from being overexposed to hazardous contaminants and minimize the cost of operating the HVAC system. The identification of the contaminants is performed by comparing the signatures provided by the sensor array with a database of known signatures. Upon identification, the system takes corrective actions based on the level of contaminant present. The present invention is capable of learning the identity of previously unknown contaminants, which increases its ability to identify contaminants in the future. Indoor air quality is assured by monitoring the contaminants not only in the indoor air, but also in the outdoor air and the air which is to be recirculated. The present invention is easily adaptable to new and existing HVAC systems. In sum, the present invention is able to monitor and adjust the quality of indoor air in real time by sensing the level and type of contaminants present in indoor air, outdoor and recirculated air, providing an intelligent decision about the quality of the air, and minimizing the cost of operating an HVAC system.

Hartenstein, Steven D.; Tremblay, Paul L.; Fryer, Michael O.; Hohorst, Frederick A.

2004-03-23T23:59:59.000Z

96

E-Print Network 3.0 - adjustable adaptive compact Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

one... mobicast is to let the protocol adapt to a ... Source: Huang, Qingfeng - Palo Alto Research Center (PARC) Collection: Computer Technologies and Information Sciences 31...

97

E-Print Network 3.0 - auto-adjusting positive airway Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

history: Accepted 7 May 2008 Keywords: Pulmonary airway closure Liquid lining Surface tension a b s t r... to pulmonary airway closure via the formation of liquid...

98

E-Print Network 3.0 - adjustable pore size Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

by the rigid material alone. The difference in pore size distribution before and after heat... are observed in the larger pore range of the pore size distribution while the...

99

E-Print Network 3.0 - adjustment model based Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Information Technologies Department, University of Maryland at College Park Collection: Energy Storage, Conversion and Utilization 4 Software effort estimation by analogy and...

100

E-Print Network 3.0 - active-front-end adjustable speed Sample...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

- Department of Electrical and Computer Engineering, Texas A&M University Collection: Energy Storage, Conversion and Utilization ; Engineering 3 724 IEEE TRANSACTIONS ON POWER...

Note: This page contains sample records for the topic "adjusted sampling weight" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

E-Print Network 3.0 - adjusted blood requirement Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

... Source: Shenoy, Prashant - Department of Computer Science, University of Massachusetts at Amherst Collection: Computer Technologies and Information Sciences 3 Always...

102

E-Print Network 3.0 - ac adjustable speed Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

speed wind turbine concept 50 4.1 Variable speed wind turbine... of a variable speed wind turbine with DFIG 54 4.4 Doubly-fed induction generator control 57 4.4.1 System......

103

E-Print Network 3.0 - adjustable speed ac Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

speed wind turbine concept 50 4.1 Variable speed wind turbine... of a variable speed wind turbine with DFIG 54 4.4 Doubly-fed induction generator control 57 4.4.1 System......

104

E-Print Network 3.0 - adjustments affect interactions Sample...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Information Processing Labs, ATR... be used to guide development of natural and affective robot motions. References Fidopiastis, C... , A.J. & Sandford, A.J. (1999) The perception...

105

E-Print Network 3.0 - adjustable bandwidth quantum Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Collection: Engineering ; Materials Science 5 Resonant-cavity-enhanced Schottky photodiode detects from 800 to 850 nm Resonant-cavity-enhanced Schottky photodiode detects from...

106

E-Print Network 3.0 - adjustable strength permanent Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Stress can also create magnetic alignment Information is stored... field strength 1 Tesla 10,000 Gauss 1T 20,000X the earth's field (0.4 Gauss) Earth's magnetic field......

107

E-Print Network 3.0 - adjusted life years Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Collection: Plasma Physics and Fusion 80 November 4, 2010 Open Enrollment for Patient Care Technical (EX) and Service (SX) Unit Employees Summary: suspended and subject to the...

108

E-Print Network 3.0 - adjustment method suggested Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

impact of the urban... evidence suggests that the dispersive stress is two orders of magnitude smaller than the other terms (Cheng Source: Reading, University of - Department of...

109

E-Print Network 3.0 - adjustable inductive decoupling Sample...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

University of Rochester Collection: Engineering 52 Development of Induction Machines in Wind Power Stefan Soter, Member, IEEE, Ralf Wegener, Student Member, IEEE Summary: an...

110

E-Print Network 3.0 - adjusted cross section Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

overhead triggered by this cross-layered ... Source: Jaffrs-Runser, Katia - Centre of Innovation in Telecommunications and Integration of Services, INSA Lyon Collection:...

111

E-Print Network 3.0 - albumin-adjusted ischemia modified Sample...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Lipid Mediator Lipidomics: New Pathways in Mapping Resolution Summary: . Keywor ds: Acrolein, arachidonic acid, cerebral ischemia, cytidine-5-diphosphocholine, CDP......

112

An introduction to price-adjusted single sampling with quadratic indifference  

E-Print Network [OSTI]

+BaX+BeX A, = 0 100E 01 B, = 0. 1OGE 01 A, = 0 QOQE 00 B, = 0 263K-02 A =-0 1QOE 01 Be=-0 263E-02 BO z BO 4J 0 C) so I? bJ R LLJ 20 10 0 10 20 ~ 40 50 B3 70 BO B0100 PERCENT OEFECTI VE ~E SIZE = 20 ALPHA =0 CED BETA =0 100 Fi ~i" 3 ~ 9... 3. ). 0 - Conc ve Do, uxvari Plan N)th n=lpp, ~-. = ~ "5, a . Xp=. . &p H (P) =A ~+A, P+A ~P L (X) =B, +H, X+B, X A, -- 0 100E 01 B, = 0 1. 00E 01 A, =-0 2OCE 01 H, =-G 1~ 00 A = 0 1GOE 01 B~= 0 2E3E-02 100 o z BD 70 0 C3 5O 5 10 0 10...

Jacobi, John Albert

1970-01-01T23:59:59.000Z

113

E-Print Network 3.0 - adjustable ellipsoid nanoparticles Sample...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

for ... Source: Jonsson, Fredrik - Micronic Laser Systems; Zheludev, Nikolay - Optoelectronics Research Centre & School of Physics and Astronomy, University of Southampton...

114

E-Print Network 3.0 - adjustable permanent quadrupoles Sample...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

developed on a dedicated beam line at RARAF... . The permanent quadrupole lenses (STI Optronics, Inc., Bellevue, WA) form a double triplet Russian quadrupole... by a fine...

115

E-Print Network 3.0 - adjusted indirect comparison Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Technologies and Information Sciences 49 Summary of the August 2009 Forum Center for BioEnergy Sustainability (CBES) Summary: )? And how much would the indirect land-use...

116

E-Print Network 3.0 - adjustment 100-k reactors Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

, and J.F. Stubbins4) Title: Final Report on In-reactor Creep-fatigue Deformation... , Finland 3) Reactor Technology Design Department, SCKCEN, 200 Boeretang, B-2400 Mol,...

117

E-Print Network 3.0 - adjustable microchip ring Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

DS21483B-page 1 TC940094019402 Summary: : 33-1-69-53-63-20 Fax: 33-1-69-30-90-79 Germany Microchip Technology GmbH Gustav-Heinemann Ring 125 D... 2002 Microchip Technology...

118

E-Print Network 3.0 - adjusted intelligent physical Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

<< < 1 2 3 4 5 > >> 1 Invited Plenary Speech, Second International Conference on Cognitive Science. July 2730, 1999. Japan. 1 Artificial Intelligence for Improving Children's...

119

E-Print Network 3.0 - anticipatory postural adjustments Sample...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

19... Anticipatory Planning 1 Running head: ... Source: Butz, Martin - Department of Cognitive Psychology, Universitt Wrzburg Collection: Computer Technologies and Information...

120

E-Print Network 3.0 - age-adjusted seer incidence Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

University of California, Irvine Collection: Physics ; Biotechnology 17 A Service-Oriented Architecture for Digital Libraries Yves Petinot1,2 Summary: The Pennsylvania State...

Note: This page contains sample records for the topic "adjusted sampling weight" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

E-Print Network 3.0 - adjust total dose Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

to the total dose received from all internal and external sources, but does... such as uranium mining. In addition, the total dose at the site boundary of nuclear facilities may...

122

E-Print Network 3.0 - adjustable virtual pore-size Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Research Group Collection: Materials Science 95 Nitrogen Adsorption in Carbon Aerogels: A Molecular Simulation Study Summary: -ray diffraction. The resulting model aerogel...

123

E-Print Network 3.0 - adjustable rare earth Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

au n04, Tome 24, a v r i l 1989 Summary: obtenus. Les constantes de Verdet de ces aerogels o n t Bt6 determinees. Abstract - Rare-earth s i l i c... a t e s and TMOS. The...

124

E-Print Network 3.0 - adjustable passive constraint Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Energy Efficiency of Directed Diffusion Using Passive Clustering Summary: Improving the Energy Efficiency of Directed Diffusion Using Passive Clustering Vlado Handziski... is by...

125

E-Print Network 3.0 - adjusted pixel features Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

pixel refresh enabled by amorphous-silicon non... -- An active-matrix organic light-emitting-diode (AMOLED) display which does not require pixel refresh... -volatile memory TFT,...

126

E-Print Network 3.0 - adjustable single-sided portable Sample...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Materials Science 28 spectroscopic techniques A Multi-Source Portable Light Emitting Diode Spectrofluorometer Summary: spectroscopic techniques A Multi-Source Portable...

127

E-Print Network 3.0 - adjustment disorders Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Research The unfoldomics decade: an update on intrinsically disordered proteins A Keith Dunker*1, Christopher J Oldfield2... of Medicine, Indianapolis, IN 46202, USA,...

128

E-Print Network 3.0 - adjustable penetration depth Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

MgB2 single crystals CATALIN MARTIN, MATTHEW VAN... , Laboratory for Solid State Physics, ETH, 8093 Zurich, Switzerland -- Magnetic penetration depth was studied... on ns, thus on...

129

E-Print Network 3.0 - adjusting plasma temperature Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Collection: Mathematics 4 Lower hybrid current drive at densities required for thermonuclear reactors R. Cesario 1), L. Amicucci 2), M. L. Apicella 1), G. Calabr 1), A....

130

E-Print Network 3.0 - agricultural adjustment act of 1933 Sample...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

are depicted... storage volume characteristics, (2) infiltration of agricultural and urban applied water, (3) local... inflows (recharge sources excluding agricultural and...

131

E-Print Network 3.0 - adjustable gravitational valves Sample...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

with a discussion of control valve calibration, optimization of control constants... valve recovery coefficient CG control valve gas sizing coefficient cV specific heat at...

132

E-Print Network 3.0 - adjusted deposit insurance Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

such as checking, savings, trust and money market deposit accounts, as well... as certificates of deposit (CDs) and IRAs. Bank accounts generally are insured by the FDIC up...

133

E-Print Network 3.0 - adjusting exterior magnetic Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Xueti Tang, Mutsuhiro... of 3D microstructures. Hard magnets are arranged in a novel 120 offset configuration, ... Source: Akella, Srinivas - Department of Computer Science,...

134

E-Print Network 3.0 - adjustment psychology Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Science? Bachelor of Arts (Psychology) (N051PSY... ) Bachelor of Arts (Psychology & Forensic Science) (N0515FOR) Bachelor of Science ... Source: Liley, David - School of...

135

Weighted Guidelines | Department of Energy  

Office of Environmental Management (EM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of EnergyEnergyENERGYWomen Owned SmallOf The 2012NuclearBradleyBudgetFurnaces andWebmasterEnergyWeighted

136

A computer test bench for checking and adjusting the automatic regulators of generator excitation systems  

SciTech Connect (OSTI)

A computer test bench for testing and debugging natural samples of the automatic excitation regulation systems of generators, the protection units and the power part of the excitation system is described. The bench includes a personal computer with specialized input-output circuit boards for analog and digital signals, and enables the time and cost involved in developing and checking control systems to be reduced considerably. The program employed operates in real time and enables the automatic excitation regulators of synchronous generators and generators with longitudinal-transverse excitation in a specific power system to be adjusted.

Dovganyuk, I. Ya.; Labunets, I. A.; Plotnikova, T. V.; Sokur, P. V. [Affiliate of the 'NTTs Elektroenergetiki' Company - Scientific Research Institute of Electric Power (VNIIE) (Russian Federation)

2008-05-15T23:59:59.000Z

137

Energy Aware Scheduling for Weighted Completion Time and Weighted Tardiness  

E-Print Network [OSTI]

The ever increasing adoption of mobile devices with limited energy storage capacity, on the one hand, and more awareness of the environmental impact of massive data centres and server pools, on the other hand, have both led to an increased interest in energy management algorithms. The main contribution of this paper is to present several new constant factor approximation algorithms for energy aware scheduling problems where the objective is to minimize weighted completion time plus the cost of the energy consumed, in the one machine non-preemptive setting, while allowing release dates and deadlines.Unlike previous known algorithms these new algorithms can handle general job-dependent energy cost functions, extending the application of these algorithms to settings outside the typical CPU-energy one. These new settings include problems where in addition, or instead, of energy costs we also have maintenance costs, wear and tear, replacement costs, etc., which in general depend on the speed at which the machine r...

Carrasco, Rodrigo A; Stein, Cliff

2011-01-01T23:59:59.000Z

138

Effects of dairy intake on weight maintenance  

E-Print Network [OSTI]

, randomized trial. Weight loss was baseline to 3 months, weight maintenance was 4 to 9 months. Participants were maintained randomly assigned to low dairy ( 3 servings/d) diets for the maintenance phase. Three...

Zemel, Michael B.; Donnelly, Joseph E.; Smith, Bryan K.; Sullivan, Debra K.; Richards, Joanna; Morgan-Hanusa, Danielle; Mayo, Matthew S.; Sun, Xiaocun; Cook-Wiens, Galen; Bailey, Bruce W.; Van Walleghen, Emily L.; Washburn, Richard A.

2008-10-24T23:59:59.000Z

139

The number of individuals sampled (n), coefficient values (a, loge(b)), standard errors for values (SE[a], SE[loge(b)]), and correlation coefficient (r2) of the relationship between prosomal width and weight for horseshoe crabs (Limulus polyphemus),  

E-Print Network [OSTI]

conversion factors used to estimate landings Page 238, Equation 1. The y-intercept variable reads "b. These numbers were converted to pounds using various conversion factors. The number of horseshoe Prosomal-width-to-weight relationships in American horseshoe crabs (Limulus polyphemus): examining conversion factors used to estimate

140

Weighted Marshall-Olkin Bivariate Exponential Distribution  

E-Print Network [OSTI]

Weighted Marshall-Olkin Bivariate Exponential Distribution Ahad Jamalizadeh§ & Debasis Kundu of weighted Marshall-Olkin bivariate exponential distribu- tions. This new singular distribution has of this paper is to introduce a weighted Marshall-Olkin bivariate exponential (WMOBE) distribution, using

Kundu, Debasis

Note: This page contains sample records for the topic "adjusted sampling weight" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Role of Experiment Covariance in Cross Section Adjustments  

SciTech Connect (OSTI)

This paper is dedicated to the memory of R. D. McKnight, which gave a seminal contribution in establishing methodology and rigorous approach in the evaluation of the covariance of reactor physics integral experiments. His original assessment of the ZPPR experiment uncertainties and correlations has made nuclear data adjustments, based on these experiments, much more robust and reliable. In the present paper it has been shown with some numerical examples the actual impact on an adjustment of accounting for or neglecting such correlations.

Giuseppe Palmiotti; M. Salvatores

2014-06-01T23:59:59.000Z

142

Saving Energy by Adjusting Transmission Power in Wireless Sensor Networks  

E-Print Network [OSTI]

and communication areas. Energy-efficient communication is an important issue in WSNs because of the limited power distributed algorithms to reduce communication energy consumption in WSNs by minimizing the total transmissionSaving Energy by Adjusting Transmission Power in Wireless Sensor Networks Xiao Chen Department

Rowe, Neil C.

143

LM137/LM337 3-Terminal Adjustable Negative Regulators  

E-Print Network [OSTI]

LM137/LM337 3-Terminal Adjustable Negative Regulators General Description The LM137/LM337 design has been opti- mized for excellent regulation and low thermal transients. Further, the LM137 virtually blowout-proof against overloads. The LM137/LM337 serve a wide variety of applications in- cluding

Ravikumar, B.

144

LM137/LM337 3-Terminal Adjustable Negative Regulators  

E-Print Network [OSTI]

LM137/LM337 3-Terminal Adjustable Negative Regulators General Description The LM137/LM337. The circuit design has been opti- mized for excellent regulation and low thermal transients. Further, the LM them virtually blowout-proof against overloads. The LM137/LM337 serve a wide variety of applications in

Berns, Hans-Gerd

145

Developing and Executing Goal-Based, Adjustably Autonomous Procedures  

E-Print Network [OSTI]

Developing and Executing Goal-Based, Adjustably Autonomous Procedures David Kortenkamp, R. Peter@jsc.nasa.gov This paper describes an approach to representing, authoring and executing procedures during human spaceflight missions. The approach allows for the explicit incorporation of goals into procedures. The approach also

Kortenkamp, David

146

GLOBAL GLACIAL ISOSTATIC ADJUSTMENT: TARGET FIELDS FOR SPACE GEODESY  

E-Print Network [OSTI]

GLOBAL GLACIAL ISOSTATIC ADJUSTMENT: TARGET FIELDS FOR SPACE GEODESY W.R. Peltier Department of Physics, University of Toronto, Toronto, Ontario, Canada M5S-1A7 peltier) and Sabadini and Peltier (1981) whose analysis was based upon the application of a homogeneous viscoelastic

Peltier, W. Richard

147

OPERATIONAL BUDGET ADJUSTMENTS: FOCUSING RESOURCES TO 2016 AND BEYOND  

E-Print Network [OSTI]

OPERATIONAL BUDGET ADJUSTMENTS: FOCUSING RESOURCES TO 2016 AND BEYOND EMMA LAKE KENDERDINE CAMPUS. This decision, while difficult, was necessary in a time of budget restraint. In addition to saving budget, in 2008 the Provost's Committee on Integrated Planning (PCIP) began providing an annual

Saskatchewan, University of

148

Upgrade LCDs or TVs with improved ergonomic adjustability  

E-Print Network [OSTI]

Highlights · Upgrade LCDs or TVs with improved ergonomic adjustability · Constant Force (CFTM comfort and productivity · 5 (130 mm) height range easily meets the ergonomic height needs of the average compliant Product Sheet Affordable desktop ergonomics Neo-FlexTM LCD Stand 870-05-067, rev. 03/08/07 www

Saskatchewan, University of

149

Respiratory and Cardiovascular Adjustments to Exercise in Reptiles  

E-Print Network [OSTI]

challenges to the respiratory system of reptiles. Incrementing aerobic metabolism above resting levelsRespiratory and Cardiovascular Adjustments to Exercise in Reptiles T.T. GLEESON ' and A.F. BEN NETT all levels of activity (Fig. lb). The mechanism for an- aerobic energy production during exercise

Bennett, Albert F.

150

Sensitivity of health risk estimates to air quality adjustment procedure  

SciTech Connect (OSTI)

This letter is a summary of risk results associated with exposure estimates using two-parameter Weibull and quadratic air quality adjustment procedures (AQAPs). New exposure estimates were developed for children and child-occurrences, six urban areas, and five alternative air quality scenarios. In all cases, the Weibull and quadratic results are compared to previous results, which are based on a proportional AQAP.

Whitfield, R.G.

1997-06-30T23:59:59.000Z

151

Estimation in Covariate Adjusted Regression Damla Senturk1  

E-Print Network [OSTI]

confounder in a multiplicative fashion. One example is data collected for a study on diabetes, where adjusted for the effects of the confounders. One example is data collected for a study on diabetes (Willems for diabetes, including cholesterol and hypertension, and diagnostic variables, such as glycosolated hemoglobin

Sentürk, Damla

152

Movement Planning and Simulation for Attitude Adjustment of a Drilling Robot  

E-Print Network [OSTI]

Movement Planning and Simulation for Attitude Adjustment of a Drilling Robot Chengkun Wang planning method for attitude adjustment of a drilling robot is presented in this paper. The double eccentric discs normal adjustment mechanism is used in the robot to adjust the attitude of the drill axis

153

COLORADO NATIONAL GUARD TUITION ADJUSTMENT FORM Indicate the term for which you are requesting the Colorado National Guard Tuition Adjustment: Term Year  

E-Print Network [OSTI]

COLORADO NATIONAL GUARD TUITION ADJUSTMENT FORM Indicate the term for which you are requesting the Colorado National Guard Tuition Adjustment: Term Year Certification of this form must be signed classification for the semester without right to appeal. Colorado National Guard tuition adjustment eligibility

Rutledge, Steven

154

COLORADO NATIONAL GUARD TUITION ADJUSTMENT FORM Indicate the term for which you are requesting the Colorado National Guard Tuition Adjustment: Term Year  

E-Print Network [OSTI]

COLORADO NATIONAL GUARD TUITION ADJUSTMENT FORM Indicate the term for which you are requesting the Colorado National Guard Tuition Adjustment: Term Year Certification of this form must be signed to appeal. Colorado National Guard tuition adjustment eligibility expires the first term following Colorado

155

MILITARY TUITION ADJUSTMENT FORM Indicate the term for which you are requesting the Military Adjustment Form: Term Year  

E-Print Network [OSTI]

­ provide copy of birth certificate or adoption certificate _____My spouse listed above as the student. Attach copies of all required documentation including birth certificates, adoption certificate, marriage Adjustment Form: Term Year Attention: Certification of this form must be signed and submitted to Student

Rutledge, Steven

156

Sampling box  

DOE Patents [OSTI]

An air sampling box that uses a slidable filter tray and a removable filter cartridge to allow for the easy replacement of a filter which catches radioactive particles is disclosed.

Phillips, Terrance D. (617 Chestnut Ct., Aiken, SC 29803); Johnson, Craig (100 Midland Rd., Oak Ridge, TN 37831-0895)

2000-01-01T23:59:59.000Z

157

atomic weights table: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

stability, atomic weights and molecular weights V. Paar, Bijeniccka 32, 10000 Zagreb, Croatia Accepted 15 January 2002 Abstract A power law is introduced weights. The power law...

158

atomic weights tables: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

stability, atomic weights and molecular weights V. Paar, Bijeniccka 32, 10000 Zagreb, Croatia Accepted 15 January 2002 Abstract A power law is introduced weights. The power law...

159

Computational procedures for weighted projective spaces  

E-Print Network [OSTI]

This is a pdf print of the homonymous Maple file, freely available at http://www.maplesoft.com/applications/view.aspx?SID=127621, providing procedures which are able to produce the toric data associated with a (polarized) weighted projective space i.e. fans, polytopes and their equivalences. More originally it provides procedures which are able to detect a weights vector Q starting from either a fan or a polytope: we will call this process the recognition of a (polarized) weighted projective space. Moreover it gives procedures connecting polytopes of a polarized weighted projective space with an associated fan and viceversa.

Rossi, Michele

2011-01-01T23:59:59.000Z

160

Adjustable Speed AC Motor Drives-Applications Problems  

E-Print Network [OSTI]

Adjustable Speed AC Motor Drives Applications Problems by Dr. P. Enjeti Power Quality Laboratory Department ofElectrical Engineering Texas A&M University College Station, TX 77843 Tel: 409-845-7466 Fax: 409-845-6259 Email..., it generates side effects, some which have been recognized only recently. This paper presents a comprehensive coverage of application issues of PWM inverter controlled ac motor drives which include damage to motor insulation due to reflected voltages caused...

Enjeti, P.

Note: This page contains sample records for the topic "adjusted sampling weight" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Energy and Reliability Considerations For Adjustable Speed Driven Pumps  

E-Print Network [OSTI]

ENERGY AND RELIABILITY CONSIDERATIONS FOR ADJUSTABLE SPEED DRIVEN PUMPS Don Casada Senior Development Associate ABSTRACT Centrifugal devices such as pumps, fans, and compressors follow a general set of speed affinity laws: Q2 = QI *( N z... there is no static head, the system head, like the pump head, is proportional to the velocity, or flow rate, squared. As a result. the pump affinity laws also indicate how the pump and system will work together to define the operating point in such a system...

Casada, D.

162

Chapter 11Chapter 11 Estimating the Weighted  

E-Print Network [OSTI]

Chapter 11Chapter 11 Estimating the Weighted Average Cost of Capital DES Chapter 11 1 #12;U i th C.xls for shortfor short. DES Chapter 11 2 #12;S i l i hSteps to estimate value using the Corporate Valuation stockholders DES Chapter 11 7 #12;Estimating Target Weights Page 223: To calculate WACC, we need to estimate

Schubart, Christoph

163

A weighted ?{sub 1}-minimization approach for sparse polynomial chaos expansions  

SciTech Connect (OSTI)

This work proposes a method for sparse polynomial chaos (PC) approximation of high-dimensional stochastic functions based on non-adapted random sampling. We modify the standard ?{sub 1}-minimization algorithm, originally proposed in the context of compressive sampling, using a priori information about the decay of the PC coefficients, when available, and refer to the resulting algorithm as weighted?{sub 1}-minimization. We provide conditions under which we may guarantee recovery using this weighted scheme. Numerical tests are used to compare the weighted and non-weighted methods for the recovery of solutions to two differential equations with high-dimensional random inputs: a boundary value problem with a random elliptic operator and a 2-D thermally driven cavity flow with random boundary condition.

Peng, Ji [Mechanical Engineering Department, University of Colorado, Boulder, CO 80309 (United States); Hampton, Jerrad [Aerospace Engineering Sciences Department, University of Colorado, Boulder, CO 80309 (United States); Doostan, Alireza, E-mail: alireza.doostan@colorado.edu [Aerospace Engineering Sciences Department, University of Colorado, Boulder, CO 80309 (United States)

2014-06-15T23:59:59.000Z

164

Effects of fine particulate matter and its constituents on low birth weight among full-term infants in California  

SciTech Connect (OSTI)

Relationships between prenatal exposure to fine particles (PM{sub 2.5}) and birth weight have been observed previously. Few studies have investigated specific constituents of PM{sub 2.5}, which may identify sources and major contributors of risk. We examined the effects of trimester and full gestational prenatal exposures to PM{sub 2.5} mass and 23 PM{sub 2.5} constituents on birth weight among 646,296 term births in California between 2000 and 2006. We used linear and logistic regression models to assess associations between exposures and birth weight and risk of low birth weight (LBW; <2500 g), respectively. Models were adjusted for individual demographic characteristics, apparent temperature, month and year of birth, region, and socioeconomic indicators. Higher full gestational exposures to PM{sub 2.5} mass and several PM{sub 2.5} constituents were significantly associated with reductions in term birth weight. The largest reductions in birth weight were associated with exposure to vanadium, sulfur, sulfate, iron, elemental carbon, titanium, manganese, bromine, ammonium, zinc, and copper. Several of these PM{sub 2.5} constituents were associated with increased risk of term LBW. Reductions in birth weight were generally larger among younger mothers and varied by race/ethnicity. Exposure to specific constituents of PM{sub 2.5}, especially traffic-related particles, sulfur constituents, and metals, were associated with decreased birth weight in California. -- Highlights: • Examine full gestational and trimester fine particle and its constituents on term birth weight. • Fine particles and several of its constituents associated with birth weight reductions. • Largest reductions for traffic-related particles, sulfur constituents, and metals. • Greater birth weight reductions for younger mothers, and varied by race/ethnicity.

Basu, Rupa, E-mail: Rupa.Basu@oehha.ca.gov [California Office of Environmental Health Hazard Assessment, Air Pollution Epidemiology Section, Oakland, CA (United States)] [California Office of Environmental Health Hazard Assessment, Air Pollution Epidemiology Section, Oakland, CA (United States); Harris, Maria [School of Public Health, Boston University, Boston, MA (United States)] [School of Public Health, Boston University, Boston, MA (United States); Sie, Lillian [School of Public Health, University of California, Berkeley, CA (United States)] [School of Public Health, University of California, Berkeley, CA (United States); Malig, Brian; Broadwin, Rachel; Green, Rochelle [California Office of Environmental Health Hazard Assessment, Air Pollution Epidemiology Section, Oakland, CA (United States)] [California Office of Environmental Health Hazard Assessment, Air Pollution Epidemiology Section, Oakland, CA (United States)

2014-01-15T23:59:59.000Z

165

Power laws and fractal behavior in nuclear stability, atomic weights and molecular weights  

E-Print Network [OSTI]

Power laws and fractal behavior in nuclear stability, atomic weights and molecular weights V. Paar and molecular weights. In Section 2 we introduce the power law for the description of the line of nuclear, Bijeniccka 32, 10000 Zagreb, Croatia Accepted 15 January 2002 Abstract A power law is introduced

Pavin, Nenad

166

Using Brain Weight to Predict Gestation in Mammals Bivariate Fit of Gestation By Brain Weight  

E-Print Network [OSTI]

1 Using Brain Weight to Predict Gestation in Mammals Bivariate Fit of Gestation By Brain Weight 0 100 200 300 400 500 Gestation 0 500 1000 1500 BrainWgt Linear Fit (All 50 mammals) Predicted Gestation = 85.248543 + 0.299867 Brain Weight Summary of Fit RSquare 0.372483 RSquare Adj 0.35941 Root Mean

Carriquiry, Alicia

167

Adjustable speed drives: Applications and R&D needs  

SciTech Connect (OSTI)

The largest opportunity for the growth of adjustable speed drives (ASDs) during the next 5-6 years is in pump, fan and compressor (PFC) applications where a constant, fixed speed operation is converted to adjustable speed in order to realize energy savings. Inverter supplied induction motors are and will continue to be predominately used in these applications. Over the long term (10-15 years), the greatest ASD growth is expected in large volume consumer applications: first in hybrid electric vehicles (EVs) and in residential heating, ventilation and air-conditioning (HVAC). Both induction and a variety of AC Permanent Magnet motors are expected to be the dominant technology in this new field. The traditional ASD applications in industries which require adjustable speed (such as machine tools, robotics, steel rolling, extruders, paper mill finishing lines, etc.) offer a relatively limited potential for above average ASD growth since most of these applications have already converted to electronic speed control. As a result, ASD growth in this sector will essentially track the growth of the corresponding industries. If realized, both short and long term ASD growth opportunities will result in significant advancements of ASD technology, which will then substantially affect all other, more fragmented, ASD applications. In fact, any single large volume ASD application will serve as a catalyst for improving ASD characteristics in all other ASD applications with the same voltage rating. ASD cost and reliability (defined in the context of application compatibility) are the two most important factors which will determine whether the ASD growth opportunities are realized. Conversely, any technological improvement which carries a cost increase will be restricted to niche applications, at best. Consequently, future R & D efforts should be directed to secure reduction in ASD cost and improvement in ASD reliability. A specific action plan is outlined in this report.

Stefanovic, V.R.

1995-09-01T23:59:59.000Z

168

Sonde Adjust Value-Added Product Technical Report  

SciTech Connect (OSTI)

The Sonde Adjust (SONDEADJUST) value-added product (VAP) creates a file that includes all fields from original Atmospheric Radiation Measurement Climate Research Facility (ARM Facility) radiosonde files and contains several value-added fields that provide adjustments related to well-known humidity issues. SONDEADJUST produces data that correct documented biases in radiosonde humidity measurements. Previous efforts towards applying some of these corrections are available via the discontinued PI product sgpsondecorr1miloC1. Unique fields contained within this datastream include smoothed original relative humidity, dry bias corrected relative humidity, and final corrected relative humidity. The smoothed RH field refines the relative humidity from integers-the resolution of the instrument-to fractions of a percent. This profile is then used to calculate the dry bias corrected field. The final correction fixes the time-lag problem and uses the dry-bias field as input into the algorithm. In addition to dry bias, solar heating is another correction that is encompassed in the final corrected RH field. Output from SONDEADJUST differs from the previous RH-corrected datastreams in important ways. First, all three types of ARM radiosondes-Vaisala RS-80, RS-90, and RS-92-are corrected using dedicated procedures and/or parameters. Second, the output variables include all of those found in the original radiosonde file: dry bulb temperature, dewpoint temperature, wind speed, wind direction, eastward wind component, northward wind component, wind status (a Vaisala-produced field used in conjunction with the Loran system), ascent rate, and original relative humidity. Additional humidity fields are smoothed relative humidity, dry biased corrected relative humidity, final ambient relative humidity, and scaled adjusted relative humidity. Third, quality control (QC) flags of the fields from the original radiosonde datastream are brought into the SONDEADJUST output file. Additional QC variables are created for the new fields.

Troyan, D

2012-01-09T23:59:59.000Z

169

Wyoming Dry Natural Gas Reserves Adjustments (Billion Cubic Feet)  

Gasoline and Diesel Fuel Update (EIA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines About U.S.30NaturalThousandExtensions (Billion2008 2009230,456 271,785,781Adjustments

170

New Mexico Dry Natural Gas Reserves Adjustments (Billion Cubic Feet)  

U.S. Energy Information Administration (EIA) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec 2007 10,998 9,933 10,998 10,643 10,998through 1996) in KansasYear JanDecade Year-0Vehicle780Adjustments

171

New York Dry Natural Gas Reserves Adjustments (Billion Cubic Feet)  

U.S. Energy Information Administration (EIA) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec 2007 10,998 9,933 10,998 10,643 10,998through 1996) in KansasYearDecadeYear Jan Feb136Adjustments (Billion

172

Alabama Dry Natural Gas Reserves Adjustments (Billion Cubic Feet)  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelinesProved Reserves (Billion CubicCubic Feet) Base Gas)1,727 1,342 1,298 1,210Adjustments

173

Alaska Dry Natural Gas Reserves Adjustments (Billion Cubic Feet)  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelinesProved Reserves (Billion CubicCubic Feet) BaseSep-14 Oct-14perCubic3,566Adjustments

174

Texas Dry Natural Gas Reserves Adjustments (Billion Cubic Feet)  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelinesProved ReservesFeet)per Thousand Cubic4,630.2per ThousandBarrels)0 0 0Adjustments

175

Kansas Dry Natural Gas Reserves Adjustments (Billion Cubic Feet)  

Gasoline and Diesel Fuel Update (EIA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines About U.S.30Natural Gas Glossary529 6330 0 14 15 0 0 0YearDecadeThousandAdjustments

176

Mississippi Dry Natural Gas Reserves Adjustments (Billion Cubic Feet)  

Gasoline and Diesel Fuel Update (EIA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines About U.S.30Natural Gas Glossary529 6330 04 19 15 15Thousand CubicYear46Adjustments

177

Engine control system having fuel-based adjustment  

DOE Patents [OSTI]

A control system for an engine having a cylinder is disclosed having an engine valve configured to affect a fluid flow of the cylinder, an actuator configured to move the engine valve, and an in-cylinder sensor configured to generate a signal indicative of a characteristic of fuel entering the cylinder. The control system also has a controller in communication with the actuator and the sensor. The controller is configured to determine the characteristic of the fuel based on the signal and selectively regulate the actuator to adjust a timing of the engine valve based on the characteristic of the fuel.

Willi, Martin L. (Dunlap, IL); Fiveland, Scott B. (Metamora, IL); Montgomery, David T. (Edelstein, IL); Gong, Weidong (Dunlap, IL)

2011-03-15T23:59:59.000Z

178

Florida Dry Natural Gas Reserves Adjustments (Billion Cubic Feet)  

Gasoline and Diesel Fuel Update (EIA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines About U.S.30Natural Gas Glossary529 633 6221,2372003ofDec.Adjustments (Billion Cubic

179

U.S. Shale Proved Reserves Adjustments (Billion Cubic Feet)  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelinesProved ReservesFeet)per Thousand28 198 18Biomass GasPropane, No.1 and No.Adjustments

180

West Virginia Dry Natural Gas Reserves Adjustments (Billion Cubic Feet)  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelinesProved ReservesFeet)perAdjustments (Billion Cubic Feet) West Virginia Dry Natural Gas

Note: This page contains sample records for the topic "adjusted sampling weight" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Adjustable Speed Pumping Applications: Industrial Technologies Program (ITP) Pumping Systems Tip Sheet #11  

SciTech Connect (OSTI)

This two-page tip sheet provides practical tips on application of Adjustable Speed Drives in industrial settings.

Not Available

2007-01-01T23:59:59.000Z

182

Highest weight Macdonald and Jack Polynomials  

E-Print Network [OSTI]

Fractional quantum Hall states of particles in the lowest Landau levels are described by multivariate polynomials. The incompressible liquid states when described on a sphere are fully invariant under the rotation group. Excited quasiparticle/quasihole states are member of multiplets under the rotation group and generically there is a nontrivial highest weight member of the multiplet from which all states can be constructed. Some of the trial states proposed in the literature belong to classical families of symmetric polynomials. In this paper we study Macdonald and Jack polynomials that are highest weight states. For Macdonald polynomials it is a (q,t)-deformation of the raising angular momentum operator that defines the highest weight condition. By specialization of the parameters we obtain a classification of the highest weight Jack polynomials. Our results are valid in the case of staircase and rectangular partition indexing the polynomials.

Th. Jolicoeur; J. G. Luque

2011-01-05T23:59:59.000Z

183

QUANTITY SEX AGE WEIGHT WITH: VENDOR  

E-Print Network [OSTI]

QUANTITY SEX AGE WEIGHT NUMBER/ CAGE WITH: VENDOR: REFERENCE No: PO No: FACILITY: RECEIVED ON PLACED BY: DATE: SUGGESTED VENDOR: AUP No: USER's PHONE No: USER's NAME: USER's EMAIL: ANIMAL REQUEST

Arnold, Jonathan

184

Weight Perception Discrepancy Among Ethnically Diverse Youth  

E-Print Network [OSTI]

not feel they are, may be at risk for negative health conditions. Social Comparison Theory may provide a tool for evaluating identified discrepancies. Given that minorities have higher obesity rates, it is hypothesized that weight perception discrepancy...

Cromwell, Kate Duncan

2012-10-19T23:59:59.000Z

185

E-Print Network 3.0 - algorithm incorporating preference Sample...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Nottingham Collection: Computer Technologies and Information Sciences 23 Articulating User Preferences in Many-Objective Problems by Sampling the Weighted Hypervolume Summary: ....

186

adjustment personal characteristics: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

the unincarcerated addict sample, almost half of whom were compulsory candidates for treatment, and presents data to show that volunteer and nonvplunteer applicants were more...

187

Programmable Differential Delay Circuit With Fine Delay Adjustment  

DOE Patents [OSTI]

Circuitry that provides additional delay to early arriving signals such that all data signals arrive at a receiving latch with same path delay. The delay of a forwarded clock reference is also controlled such that the capturing clock edge will be optimally positioned near quadrature (depending on latch setup/hold requirements). The circuitry continuously adapts to data and clock path delay changes and digital filtering of phase measurements reduce errors brought on by jittering data edges. The circuitry utilizes only the minimum amount of delay necessary to achieve objective thereby limiting any unintended jitter. Particularly, this programmable differential delay circuit with fine delay adjustment is designed to allow the skew between ASICS to be minimized. This includes skew between data bits, between data bits and clocks as well as minimizing the overall skew in a channel between ASICS.

DeRyckere, John F. (Eau Claire, WI); Jenkins, Philip Nord (Eau Claire, WI); Cornett, Frank Nolan (Chippewa Falls, WI)

2002-07-09T23:59:59.000Z

188

Raman scheme for adjustable-bandwidth quantum memory  

SciTech Connect (OSTI)

We propose a scenario of quantum memory for light based on Raman scattering. The storage medium is a vapor and the different spectral components of the input pulse are stored in different atomic velocity classes. One uses appropriate pulses to reverse the resulting Doppler phase shift and to regenerate the input pulse, without distortion, in the backward direction. The different stages of the protocol are detailed and the recovery efficiency is calculated in the semiclassical picture. Since the memory bandwidth is determined by the Raman transition Doppler width, it can be adjusted by changing the angle between the input pulse wave vector and the control beams. The optical depth also depends on the beam angle. As a consequence the available optical depth can be optimized depending on the needed bandwidth. The predicted recovery efficiency is close to 100% for large optical depth.

Le Goueet, J.-L.; Berman, P. R. [Laboratoire Aime Cotton, CNRS UPR3321, Universite Paris Sud, Batiment 505, Campus Universitaire, 91405 Orsay (France); Department of Physics and Michigan Center for Theoretical Physics, University of Michigan, Ann Arbor, Michigan 48109-1040 (United States)

2009-07-15T23:59:59.000Z

189

E-Print Network 3.0 - aisi-348 h2o b4c Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

of Summary: . The sample is transferred with 2*10 ml H2O and weighted into in a polyethylene container. Total weight... is dissolved in 10 ml 1:1 mixture of 65% HNO3H2O with...

190

Response Surfaces for Optimal Weight of  

E-Print Network [OSTI]

Two levels of fidelity are used for minimum weight design of a composite bladestiffened panel subject to crack propagation constraints. The low fidelity approach makes use of an equivalent strain constraint calculated by a closed form solution for the stress intensity factor. The high fidelity approach uses the stress intensity factor directly as the constraint and computes it from the stress distribution around the crack. A number of panels were optimized by both approaches for different values of applied load, crack length, and blade height, and response surface approximations for optimal weight as function of these configuration variables were constructed. Computational cost, noise and accuracy for the results are compared.

Cracked Composite Panels; Melih Papila; Raphael T. Haftka

2000-01-01T23:59:59.000Z

191

MULTIMODE TREE CODING OF SPEECH WITH PERCEPTUAL PRE-WEIGHTING AND POST-WEIGHTING  

E-Print Network [OSTI]

Multimode Tree Coder, a simple mode classification method along with frame energy are used to classifyMULTIMODE TREE CODING OF SPEECH WITH PERCEPTUAL PRE-WEIGHTING AND POST-WEIGHTING Pravin Ramadas, Ying-Yi Li, and Jerry D. Gibson Department of Electrical and Computer Engineering, University

Liebling, Michael

192

No. 2014-056 MULTI-STAGE ADJUSTABLE ROBUST MIXED ...  

E-Print Network [OSTI]

Sep 29, 2014 ... ?CentER and Department of Econometrics and Operations ...... We sample 50 instances for each N and conduct 8 splitting rounds for N = 5,10,.

2014-10-02T23:59:59.000Z

193

Nutrition, Weight Control and Fast Food.  

E-Print Network [OSTI]

Page in Original Bulletin] Nutrition, Weight Control and Fast Food Mary K. Sweeten* The Fast Food Trend More people are eating fewer meals at home and more snack-type meals at fast food ' restaurants. Fast food sales in 1978 in the United States...

Sweeten, Mary K.

1980-01-01T23:59:59.000Z

194

Adjustable Shock Test Sled for Haversine Pulses at 250 fps  

SciTech Connect (OSTI)

New test requirements were developed by Sandia National Laboratory to simulate a regime of shock testing not previously performed at the Kansas City Plant operated by Honeywell Federal Manufacturing & Technologies. These environments were unique in that they involved amplitude of shock >1000g with relatively long pulse durations (greater 5 ms but less than 10 ms) and involved velocity changes up to 235 ft/sec. Ten months were available to develop, design, manufacture and prove-in this new capability. We designed a new shock sled to deliver this new family of shock environments in a laboratory test. The performance range of the new sled includes five specific shocks (1000 g – 8 ms, 1300 - 6 ms, 1500 g – 5.4 ms, 1950 g – 6 ms, 2250 g – 5.4 ms; all haversine shaped), and it also incorporates adjustability to accommodate new shocks within this range. These shock environments result in velocity changes ranging from 160 fps to 250 fps. The test sled accommodates test articles weighing up to 20 lbs and measuring up to 10” along any axis.

Troy Hartwig; Brent Hower; Aaron Seaholm

2008-05-05T23:59:59.000Z

195

Capacitor charging FET switcher with controller to adjust pulse width  

DOE Patents [OSTI]

A switching power supply includes an FET full bridge, a controller to drive the FETs, a programmable controller to dynamically control final output current by adjusting pulse width, and a variety of protective systems, including an overcurrent latch for current control. Power MOSFETS are switched at a variable frequency from 20-50 kHz to charge a capacitor load from 0 to 6 kV. A ferrite transformer steps up the DC input. The transformer primary is a full bridge configuration with the FET switches and the secondary is fed into a high voltage full wave rectifier whose output is connected directly to the energy storage capacitor. The peak current is held constant by varying the pulse width using predetermined timing resistors and counting pulses. The pulse width is increased as the capacitor charges to maintain peak current. A digital ripple counter counts pulses, and after the desired number is reached, an up-counter is clocked. The up-counter output is decoded to choose among different resistors used to discharge a timing capacitor, thereby determining the pulse width. A current latch shuts down the supply on overcurrent due to either excessive pulse width causing transformer saturation or a major bridge fault, i.e., FET or transformer failure, or failure of the drive circuitry.

Mihalka, Alex M. (Livermore, CA)

1986-01-01T23:59:59.000Z

196

Weight Watchers on prescription: An observational study of weight change among adults referred to Weight Watchers by the NHS  

E-Print Network [OSTI]

the attitudes of the sponsor. Competing interests This data analysis presented here was funded by Weight Watchers through a grant to the Medical Research Council. None of the authors has benefitted personally from this research or received remuneration from... . London: The Health and Social Care Information Centre; 2009. 2. Foresight: Tackling Obesities: Future Choices - Project Report. Government Office for Science; 2007. 3. McCormick B, Stone I: Economic costs of obesity and the case for government...

Ahern, Amy L; Olson, Ashley D; Aston, Louise M; Jebb, Susan A

2011-06-06T23:59:59.000Z

197

ADJUSTMENT COSTS, LEARNING-BY-DOING, AND TECHNOLOGY ADOPTION UNDER UNCERTAINTY  

E-Print Network [OSTI]

We consider a variety of vintage capital models of a firm's choice of technology under uncertainty in the presence of adjustment costs and technology-specific learning. ...

Pavlova, Anna

2003-01-27T23:59:59.000Z

198

Asymmetric Price Adjustment and Consumer Search: An Examination of the Retail Gasoline Market  

E-Print Network [OSTI]

The Behavior of Retail Gasoline Prices: Symmetric or Not? ”Adjustment of U.K. Retail Gasoline Prices to Cost Changes. ”documented that retail gasoline prices respond more quickly

Lewis, Matt

2003-01-01T23:59:59.000Z

199

Asymmetric Price Adjustment and Consumer Search: An Examination of the Retail Gasoline Industry  

E-Print Network [OSTI]

Adjustment of U.K. Retail Gasoline Prices to Cost Changes. ”The Behavior of Retail Gasoline Prices: Symmetric or Not? ”documented that retail gasoline prices respond more quickly

Lewis, Matt

2003-01-01T23:59:59.000Z

200

2014 Across-Breed EPD Adjustment Factors Released When using EPDs, bulls from one breed cannot be compared to another unless an adjustment factor is used. Since 1993,  

E-Print Network [OSTI]

Research Center in Clay Center, Nebraska have released adjustment factors for growth traits and maternal Tough Decisions I have heard several questions concerning 1.) Should I sell my calves at weaning?, And 2

Florida, University of

Note: This page contains sample records for the topic "adjusted sampling weight" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Replication regulates volume weighting in quantum cosmology  

SciTech Connect (OSTI)

Probabilities for observations in cosmology are conditioned both on the Universe's quantum state and on local data specifying the observational situation. We show the quantum state defines a measure for prediction through such conditional probabilities that is well-behaved for spatially large or infinite universes when the probabilities that our data are replicated are taken into account. In histories where our data are rare volume weighting connects top-down probabilities conditioned on both the data and the quantum state to the bottom-up probabilities conditioned on the quantum state alone. We apply these principles to a calculation of the number of inflationary e-folds in a homogeneous, isotropic minisuperspace model with a single scalar field moving in a quadratic potential. We find that volume weighting is justified and the top-down probabilities favor a large number of e-folds, hereby predicting the curvature of our Universe at the present time to be approximately zero.

Hartle, James [Department of Physics, University of California, Santa Barbara, California 93106 (United States); Hertog, Thomas [APC, UMR 7164 (CNRS, Universite Paris 7), 10 rue A.Domon et L.Duquet, 75205 Paris (France) and Intl Solvay Institutes, Boulevard du Triomphe, ULB-C.P. 231, 1050 Brussels (Belgium)

2009-09-15T23:59:59.000Z

202

Information weights of nucleotides in DNA sequences  

E-Print Network [OSTI]

The coding sequence in DNA molecule is considered as a message to be transferred to receiver, the proteins, through a noisy information channel and each nucleotide is assigned a respective information weight. With the help of the nucleotide substitution matrix we estimated the lower bound of the amount of information carried out by nucleotides which is not subject of mutations. We used the calculated weights to reconstruct k-oligomers of genes from the Borrelia burgdorferi genome. We showed, that to this aim there is sufficient a simple rule, that the number of bits of the carried information cannot exceed some threshold value. The method introduced by us is general and applies to every genome.

M. R. Dudek; S. Cebrat; M. Kowalczuk; P. Mackiewicz; A. Nowicka; D. Mackiewicz; M. Dudkiewicz

2003-01-21T23:59:59.000Z

203

Optimal transition from coal to gas and renewable power under capacity constraints and adjustment costs  

E-Print Network [OSTI]

Optimal transition from coal to gas and renewable power under capacity constraints and adjustment existing coal power plants to gas and renewable power under a carbon budget. It solves a model of polluting, exhaustible resources with capacity constraints and adjustment costs (to build coal, gas, and renewable power

Paris-Sud XI, Université de

204

Precise Timing Adjustment for the ATLAS Level1 Endcap Muon Trigger System , O. Sasakia  

E-Print Network [OSTI]

Precise Timing Adjustment for the ATLAS Level1 Endcap Muon Trigger System Y. Suzukia , O. Sasakia by Yu Suzuki yu.suzuki@cern.ch Abstract The ATLAS level-1 endcap muon trigger system consists of about alignment of individual channels with the timing adjust- ment facility embedded in the TGC electronics

Fukunaga, Chikara

205

Section 1 (For Expenditure Adjustments) EXPENDITURES FOR BUSINESS BUDGET BUDGET BUDGET BUDGET OFFICE USE  

E-Print Network [OSTI]

DATE Section 1 (For Expenditure Adjustments) EXPENDITURES FOR BUSINESS BUDGET BUDGET BUDGET BUDGET AMOUNT AMOUNT AMOUNT CODE TOTAL FOR BUSINESS Section 2 (For Revenue and Other Adjustments) BUDGET BUDGET/Chief Administrative Officer Department Head Chief Business Officer Dean or Director Vice President for Budget

Tennessee, University of

206

Ergonomics Self-Evaluation: Computer Workstation Step 1: Adjust the Chair  

E-Print Network [OSTI]

Ergonomics Self-Evaluation: Computer Workstation Step 1: Adjust the Chair a. Seat height ­ Adjust medical condition or ergonomic concern, contact the UT at Austin Occupational Health Program at 512.471.4OHP(4647). http://www.utexas.edu/hr/current/services/ohp.html Ergonomic evaluation services

Johnston, Daniel

207

EN-012 Ecology September 2003 Using Line Intersect Sampling for Coarse Woody Debris  

E-Print Network [OSTI]

EN-012 Ecology September 2003 Using Line Intersect Sampling for Coarse Woody Debris: Practitioners, coarse woody debris, CWD, piece length, forest ecology, sampling methods, survey design, field to adjust pile volume to wood volume (Little 1982; Hardy 1996). Extension Note Research Disciplines: Ecology

208

Control Your Weight While Eating Out.  

E-Print Network [OSTI]

Station ? Texas [Blank Page in Original Bulletin] Control Your Weight While Eating Out Mary K. Sweeten* Eating Out Trend The eating out trend is here to stay. Approximately $61 billion was spent for food eaten away from home in 1978. In 1975, 56... or tea. Avoid using cream or sugar to flavor coffee or tea; substitute a dietetic sweetener if desi red. Stop eating when full and when you have eaten your allotted calories. Then ask the waitress to remove your plate and the remaining food from...

Sweeten, Mary K.

1980-01-01T23:59:59.000Z

209

Light-weight analyzer for odor recognition  

DOE Patents [OSTI]

The invention provides a light weight analyzer, e.g., detector, capable of locating clandestine graves. The detector utilizes the very specific and unique chemicals identified in the database of human decompositional odor. This detector, based on specific chemical compounds found relevant to human decomposition, is the next step forward in clandestine grave detection and will take the guess-work out of current methods using canines and ground-penetrating radar, which have historically been unreliable. The detector is self contained, portable and built for field use. Both visual and auditory cues are provided to the operator.

Vass, Arpad A; Wise, Marcus B

2014-05-20T23:59:59.000Z

210

Weight Management Program - HPMC Occupational Health Services  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear SecurityTensile Strain Switched FerromagnetismWaste and Materials Disposition3February 2015Program > Weight

211

E-Print Network 3.0 - age body weight Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

a teachable moment'' when his body composition was assessed... Journal by Wayne Westcott, Ph.D. (10). The data pre- sented below include 20 years of ... Source: Arnold,...

212

E-Print Network 3.0 - average molecular weights Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

of California at Berkeley Collection: Physics 17 Crystallization of quenched polyethylene. Part III : Mixtures of fractions Laboratoire de Physique des Solides, Bt. 510,...

213

E-Print Network 3.0 - acute weight loss Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Life Sciences, Arizona State University Collection: Environmental Sciences and Ecology 71 Acrolein-Mediated Mechanisms of Neuronal Death Summary: with these events in the acute...

214

E-Print Network 3.0 - assigning individual weights Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Summary: - tation of assignments. The second problem is the one of es- timating the id of individual objects... . The assignments of individual observations to objects are...

215

E-Print Network 3.0 - attenuates weight gain Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

at Stony Brook, Department of Computer Science, Visualization Laboratory Collection: Computer Technologies and Information Sciences 35 Mantle Q structure from S-P differential...

216

E-Print Network 3.0 - adolescence weight status Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

through adolescence, with a current focus on the emergence of dieting and problems of energy balance... in girls during middle childhood and early adolescence. Chalandra Bryant...

217

Load-Based (LB) CRAC (rates/adjustments)  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: VegetationEquipment Surfaces and Interfaces Sample6, 2011LiisaInnovationorganizationLiz HartmanLoad-Based

218

atomic weight determinations: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

14 15 16 17 18 19 20 21 22 23 24 25 Next Page Last Page Topic Index 1 Power laws and fractal behavior in nuclear stability, atomic weights and molecular weights Physics Websites...

219

The Complexity of Weighted Boolean #CSP , Sangxia Huang2  

E-Print Network [OSTI]

The Complexity of Weighted Boolean #CSP Modulo k Heng Guo1 , Sangxia Huang2 , Pinyan Lu3@gmail.com Abstract We prove a complexity dichotomy theorem for counting weighted Boolean CSP modulo k for any similar to the one for the complex weighted Boolean #CSP, found by [Cai, Lu and Xia, STOC 2009]. Then we

Paris-Sud XI, Université de

220

Complexity of Counting CSP with Complex Weights  

E-Print Network [OSTI]

We give a complexity dichotomy theorem for the counting Constraint Satisfaction Problem (#CSP in short) with complex weights. To this end, we give three conditions for its tractability. Let F be any finite set of complex-valued functions, then we prove that #CSP(F) is solvable in polynomial time if all three conditions are satisfied; and is #P-hard otherwise. Our complexity dichotomy generalizes a long series of important results on counting problems: (a) the problem of counting graph homomorphisms is the special case when there is a single symmetric binary function in F; (b) the problem of counting directed graph homomorphisms is the special case when there is a single not-necessarily-symmetric binary function in F; and (c) the standard form of #CSP is when all functions in F take values in {0,1}.

Cai, Jin-Yi

2011-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "adjusted sampling weight" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Adjustment and Sensitivity Analyses of a Beta Global Rangeland Model Randall B. Boone1  

E-Print Network [OSTI]

1 Adjustment and Sensitivity Analyses of a Beta Global Rangeland Model Randall B. Boone1 , Richard Institute, P.O. Box 30709, Nairobi 00100, Kenya Contact R.B. Boone at: Randall.Boone@ColoState.edu August 31

Boone, Randall B.

222

The subnational politics of structured adjustment in Argentina : the case of San Luis  

E-Print Network [OSTI]

The launching of liberal economic reforms in emerging democratic societies during the 1980s and 1990s arouse widespread scholarly interest. The Argentine policy shift to structural adjustment under President Carlos Menem ...

Guiñazú, María Clelia

2003-01-01T23:59:59.000Z

223

Is the hourly data I get from NREL's PV Watts program adjusted...  

Open Energy Info (EERE)

get from NREL's PV Watts program adjusted for daylight savings time. Home I take the hourly AC output numbers and apply them to a program I built that assigns a dollar value to the...

224

Adjustable Speed Drives in the U.S. Petroleum Refining, Petrochemical, and Chemical Industries  

E-Print Network [OSTI]

This paper describes applications and incentives for the use of variable frequency drivers (VFD) in the petroleum refining, petrochemical, and chemical industries. VFDs are a particular type of adjustable speed driver (ASD) found prevalently...

Foley, D. J.; Chodorowski, A.

225

Assessment of Dancoff adjusted Wigner-Seitz cells for self-shielding LWR lattices  

E-Print Network [OSTI]

The objective of this thesis was to assess the effectiveness of using a Wigner-Seitz (WS) cell with an adjusted moderator thickness to produce more accurate resonance self-shielded cross sections for light water reactor ...

Roomy, Thomas Hayward

2012-01-01T23:59:59.000Z

226

A uniform price auction with locational price adjustments for competitive electricity markets  

E-Print Network [OSTI]

; Competitive electricity markets; Poolco Alternatively, the Market Coordinator could ask the private generatingA uniform price auction with locational price adjustments for competitive electricity markets b School of Electrical Engineering, Phillips Hall, Cornell University, Ithaca, NY 14853, USA c

227

Asymmetric Price Adjustment and Consumer Search: An Examination of the Retail Gasoline Industry  

E-Print Network [OSTI]

Adjustment of U.K. Retail Gasoline Prices to Cost Changes. ”C. and R. Gilbert (1997) “Do Gasoline Prices Respond Asym-Asymmetries in Local Gasoline Markets” Energy Economics

Lewis, Matt

2003-01-01T23:59:59.000Z

228

Asymmetric Price Adjustment and Consumer Search: An Examination of the Retail Gasoline Market  

E-Print Network [OSTI]

Adjustment of U.K. Retail Gasoline Prices to Cost Changes. ”C. and R. Gilbert (1997) “Do Gasoline Prices Respond Asym-Asymmetries in Local Gasoline Markets” Energy Economics

Lewis, Matt

2003-01-01T23:59:59.000Z

229

31.01.01.V1.05 SALARY ADJUSTMENTS FOR INTERNATIONAL ASSIGNMENTS  

E-Print Network [OSTI]

administered by the employee, or other measure of increased responsibility resulting from the assignment. 1 associated with a change in position. 2.00 GUIDELINES AND PROCEDURES 2.01 All salary adjustments

230

The relation between family functioning and psychological adjustment in children with asthma and children with diabetes  

E-Print Network [OSTI]

The goals of this study were to evaluate the relationships among family functioning, psychological adjustment, and health-related quality of life in children with asthma and children with diabetes. A secondary goal of this study was to examine...

Fontaine, Eve Nicole

2007-04-25T23:59:59.000Z

231

Retrofit Installations of Adjustable Speed Drives to Conserve Energy at Industrial Facilities  

E-Print Network [OSTI]

Meeting of the Cooling Tower Institute, January 19-21, 1981 (9) Variable Frequency Converters Bruce Safron Louis Allis Division, Litton Industrial Products, Inc. (10) Application of the Current Source Adjustable Frequency Converter to Waste... Characteristics & Economic Industrial Controls Corp. Considerations of Electric Pump Drives (IEEE-PCIC-1982) R. E. Sieck, Westinghouse Elec. Corp. C. L. Bechnel, Westinghouse Elec. Corp. (41) A 10,000 hp AC Adjustable-Frequency (IEEE-PCIC-1979) Compressor...

Porcaro, C. R.; Galstaun, L. S.; Holmes, M. L.

1984-01-01T23:59:59.000Z

232

Uncertainty-based Estimation of the Secure Range for ISO New England Dynamic Interchange Adjustment  

SciTech Connect (OSTI)

The paper proposes an approach to estimate the secure range for dynamic interchange adjustment, which assists system operators in scheduling the interchange with neighboring control areas. Uncertainties associated with various sources are incorporated. The proposed method is implemented in the dynamic interchange adjustment (DINA) tool developed by Pacific Northwest National Laboratory (PNNL) for ISO New England. Simulation results are used to validate the effectiveness of the proposed method.

Etingov, Pavel V.; Makarov, Yuri V.; Wu, Di; Hou, Zhangshuan; Sun, Yannan; Maslennikov, S.; Luo, Xiaochuan; Zheng, T.; George, S.; Knowland, T.; Litvinov, E.; Weaver, S.; Sanchez, E.

2014-04-14T23:59:59.000Z

233

ESPC IDIQ Contract Sample  

Broader source: Energy.gov [DOE]

Document displays a sample indefinite delivery, indefinite quantity (IDIQ) energy savings performance contract (ESPC).

234

Characterization of light weight composite proppants  

E-Print Network [OSTI]

of polymer coat on the particles. Only the coated walnut shell particles were studied. Briefly the sample preparation procedure is discussed. ? Particles were placed in 5% Acrolein for 24 hours. Acrolin is a fixative ? fixation is carried out... to preserve the cell structure. ? Acrolein is replaced with the HEPES buffer. ? Replace HEPES with Osmium tetroxide (OsO4) to enhance contrast during image acquisition. Particles are stored for 24 hours in refrigerator at 4 ?C. ? Dehydration...

Kulkarni, Mandar Chaitanya

2009-05-15T23:59:59.000Z

235

CT effective dose per dose length product using ICRP 103 weighting factors  

SciTech Connect (OSTI)

Purpose: To generate effective dose per unit dose length product (E/DLP) conversion factors incorporating ICRP Publication 103 tissue weighting factors. Methods: Effective doses for CT examinations were obtained using the IMPACT Dosimetry Calculator using all 23 dose data sets that are offered by this spreadsheet. CT examinations were simulated for scans performed along the patient long axis for each dosimetry data set using a 4 cm beam width ranging from the upper thighs to top of the head. Five basic body regions (head, neck, chest, abdomen, and pelvis), as well as combinations of the regions (head/neck, chest/abdomen, abdomen/pelvis, and chest/abdomen/pelvis) and whole body CT scans were investigated. Correction factors were generated that can be applied to convert E/DLP conversion factors based on ICRP 60 data to conversion factors that are valid for ICRP 103 data (i.e., E{sub 103}/E{sub 60}). Results: Use of ICRP 103 weighting factors increase effective doses for head scans by {approx}11%, for chest scans by {approx}20%, and decrease effective doses for pelvis scans by {approx}25%. Current E/DLP conversion factors are estimated to be 2.4 {mu}Sv/mGy cm for head CT examinations and range between 14 and 20 {mu}Sv/mGy cm for body CT examinations. Conclusions: Factors that enable patient CT doses to be adjusted to account for ICRP 103 tissue weighting factors are provided, which result in E/DLP factors that were increased in head and chest CT, reduced in pelvis CT, and showed no marked change in neck and abdomen CT.

Huda, Walter; Magill, Dennise; He Wenjun [Department of Radiology and Radiological Science, Medical University of South Carolina, Charleston, South Carolina 29425 (United States); Department of Bioengineering, Clemson-MUSC Bioengineering Program, Clemson University, Charleston, South Carolina 29425 (United States)

2011-03-15T23:59:59.000Z

236

Rain sampling device  

DOE Patents [OSTI]

The present invention constitutes a rain sampling device adapted for independent operation at locations remote from the user which allows rainfall to be sampled in accordance with any schedule desired by the user. The rain sampling device includes a mechanism for directing wet precipitation into a chamber, a chamber for temporarily holding the precipitation during the process of collection, a valve mechanism for controllably releasing samples of the precipitation from the chamber, a means for distributing the samples released from the holding chamber into vessels adapted for permanently retaining these samples, and an electrical mechanism for regulating the operation of the device. 11 figures.

Nelson, D.A.; Tomich, S.D.; Glover, D.W.; Allen, E.V.; Hales, J.M.; Dana, M.T.

1991-05-14T23:59:59.000Z

237

Rain sampling device  

DOE Patents [OSTI]

The present invention constitutes a rain sampling device adapted for independent operation at locations remote from the user which allows rainfall to be sampled in accordance with any schedule desired by the user. The rain sampling device includes a mechanism for directing wet precipitation into a chamber, a chamber for temporarily holding the precipitation during the process of collection, a valve mechanism for controllably releasing samples of said precipitation from said chamber, a means for distributing the samples released from the holding chamber into vessels adapted for permanently retaining these samples, and an electrical mechanism for regulating the operation of the device.

Nelson, Danny A. (Richland, WA); Tomich, Stanley D. (Richland, WA); Glover, Donald W. (Prosser, WA); Allen, Errol V. (Benton City, WA); Hales, Jeremy M. (Kennewick, WA); Dana, Marshall T. (Richland, WA)

1991-01-01T23:59:59.000Z

238

Sample Desorption/Onization From Mesoporous Silica  

DOE Patents [OSTI]

Mesoporous silica is shown to be a sample holder for laser desorption/ionization of mass spectrometry. Supported mesoporous silica was prepared by coating an ethanolic silicate solution having a removable surfactant onto a substrate to produce a self-assembled, ordered, nanocomposite silica thin film. The surfactant was chosen to provide a desired pore size between about 1 nanometer diameter and 50 nanometers diameter. Removal of the surfactant resulted in a mesoporous silica thin film on the substrate. Samples having a molecular weight below 1000, such as C.sub.60 and tryptophan, were adsorbed onto and into the mesoporous silica thin film sample holder and analyzed using laser desorption/ionization mass spectrometry.

Iyer, Srinivas (Los Alamos, NM); Dattelbaum, Andrew M. (Los Alamos, NM)

2005-10-25T23:59:59.000Z

239

March 2014 Visual Sample Plan Version 7.08.1 8.0 References  

E-Print Network [OSTI]

, 56, 149- 155. Cleveland W.S. 1979. "Robust Locally Weighted Regression and Smoothing Scatterplots 13:629-59. Chernick, M. R., and Liu, C. Y. (2002). The saw-toothed behavior of power versus sample

240

E-Print Network 3.0 - amplitude collective motion Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

amplitude from 0 to agxyzd across reps, allowing for a sampling of the b value curve in one run. For all... for diffusion weighting pwgd ??? is pwgd + 400us agxd 0 or...

Note: This page contains sample records for the topic "adjusted sampling weight" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

affects body weight: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

weight perceptions may be influ- enced by food habits and food environments, nutritional knowledge, cultural norms and expectations and mass media Mikolajczyk, Rafael T; Maxwell,...

242

Light weight and economical exhaust heat exchanger for waste...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

exhaust heat exchanger for waste heat recovery using mixed radiant and convective heat transfer Light weight and economical exhaust heat exchanger for waste heat recovery...

243

CHARACTERIZATION OF CORE SAMPLE COLLECTED FROM THE SALTSTONE DISPOSAL FACILITY  

SciTech Connect (OSTI)

During the month of September 2008, grout core samples were collected from the Saltstone Disposal Facility, Vault 4, cell E. This grout was placed during processing campaigns in December 2007 from Deliquification, Dissolution and Adjustment Batch 2 salt solution. The 4QCY07 Waste Acceptance Criteria sample collected on 11/16/07 represents the salt solution in the core samples. Core samples were retrieved to initiate the historical database of properties of emplaced Saltstone and to demonstrate the correlation between field collected and laboratory prepared samples. Three samples were collected from three different locations. Samples were collected using a two-inch diameter concrete coring bit. In April 2009, the core samples were removed from the evacuated sample container, inspected, transferred to PVC containers, and backfilled with nitrogen. Samples furthest from the wall were the most intact cylindrically shaped cored samples. The shade of the core samples darkened as the depth of coring increased. Based on the visual inspection, sample 3-3 was selected for all subsequent analysis. The density and porosity of the Vault 4 core sample, 1.90 g/cm{sup 3} and 59.90% respectively, were comparable to values achieved for laboratory prepared samples. X-ray diffraction analysis identified phases consistent with the expectations for hydrated Saltstone. Microscopic analysis revealed morphology features characteristic of cementitious materials with fly ash and calcium silicate hydrate gel. When taken together, the results of the density, porosity, x-ray diffraction analysis and microscopic analysis support the conclusion that the Vault 4, Cell E core sample is representative of the expected waste form.

Cozzi, A.; Duncan, A.

2010-01-28T23:59:59.000Z

244

COMPUTER SCIENCE SAMPLE PROGRAM  

E-Print Network [OSTI]

COMPUTER SCIENCE SAMPLE PROGRAM (First Math Course MATH 198) This sample program suggests one way CS 181: Foundations of Computer Science II CS 180: Foundations of Computer Science I CS 191

Gering, Jon C.

245

Influence of Age, Type and Fertility in Rambouillet Ewes on Fineness of Fibers, Fleece Weight, Staple Length, and Body Weight.  

E-Print Network [OSTI]

- - PEXAS AGRICULTURAL EXPERIMENT STATION A. B. CONNER, DIRECTOR College Station. Texas BULLETIN NO. 657 AUGUST 1944 ' INFLUENCE OF AGE, TYPE AND FERTILITY IN RAMBOUILLET EWES ON FINENESS I 1 OF FIBER, FLEECE WEIGHT, STAPLE LENGTH... type in Rambouillet ewes on fleece weight, length staple, fineness of fiber and body weight. Heaviest scoured fleeces .e produced during the third age year, however when considered on rer an unscoured or scoured basis the differences in production...

Patterson, R.E.; Warwick, B.L.; Davis, S. P; Dameron, W. H.; Jones, J. M. (John McKinley)

1944-01-01T23:59:59.000Z

246

Surface Tension Adjustment in a Pseudo-Potential Lattice Boltzmann Model  

E-Print Network [OSTI]

Pseudo-potential lattice Boltzmann models have been widely applied in many multiphase simulations. However, most of these models still suffer from some drawbacks such as spurious velocities and untunable surface tension. In this paper, we aim to discuss the surface tension of a popular pseudo-potential model proposed by Kupershtokh et al., which has attracted much attention due to its simplicity and stability. The influence of a parameter on the surface tension in the model is analyzed. Based on the analysis, we proposed a method to adjust surface tension by changing the parameter in the model. However, the density distribution and the stability of the model also depend on the parameter. To adjust the surface tension independently, the pressure tensor modifying method is introduced and numerically tested. The simulation results show that, by applying the pressure tensor modifying method, the surface tension can be adjusted with little influence on the stability and density distributions.

Hu, Anjie; Uddin, Rizwan

2014-01-01T23:59:59.000Z

247

The relation of body weight, egg weight, rate of production and breeding to feed efficiency for egg production  

E-Print Network [OSTI]

"+ Significant at the . 01 level of probability Body Weight Gtns. White Leghorn DeKatb 1st Hyline 934 2200 2100 2000 1900 1800 1700 1600 1500 I 2 3 4 S 6 7 Periods Figure I. Average Body Weights by 4-Week Periods Av. Egg Weight Gree Wiute... Leghorn DeKalb igl Hyline 934 63 61 59 57 55 53 1 2 3 4 5 6 7 Periods Figure Z. Average Egg Weighte by 4-Week Period Percent Egg Production Hen-Day White leghorn DeKatb 101 Hyline 934 76 72 68 60 56 52 2 3 4 5 6 7 Periods Figure 3...

McCracken, Don Frederick

2012-06-07T23:59:59.000Z

248

The Influence of Weight Concerns and Weight Control Expectancies in the Smoking Behavior of Spanish Adolescents  

E-Print Network [OSTI]

smoking in college-student samples (Brandon & Baker, 1991, Downey & Kilbey, 1995) and in nicotine-dependent community samples (Copeland, Brandon & Quinn, 1995). Hine, Tilleczek, Lewko, McKenzie-Ritcher, & Perreault (2005) found that individuals who... smoking initiation to regular smoking (Chassin et al., 1981; Chassin, Presson, & Sherman, 1984). In addition, positive expectancies are linked to greater smoking rates, levels of nicotine dependence, and relapse after quitting (Copeland, Brandon...

Berrios-Hernandez, Mayra

2012-07-16T23:59:59.000Z

249

Characteristics of the samples in the FNG fission deposit collection  

SciTech Connect (OSTI)

Information concerning the samples in the Fast Neutron Generator (FNG) Group's fission deposit collection has been assembled. This includes the physical dimensions, isotopic analyses, half-lives, alpha emission rates specific activities and deposit weights. 10 refs., 9 figs., 5 tabs.

Meadows, J.W.

1990-12-01T23:59:59.000Z

250

Some Economic Effects of Adjusting to a Changing Water Supply, Texas High Plains.  

E-Print Network [OSTI]

. the following categories. Shifting from butane (L. P. gas) to natural gas Areas not particularly affected by water-lev4 for pump engine fuel is another significant eco- decline include about 194,000 acres, or 5.4 percr:!:: nomic adjustment... the decline in water level and decI:rs- from butane to natural gas for pumping fuel. induced adjustments have seriously depietd ::x Elimination or of transmission losses water supply, sharply increased the investms:: :r pcrrticulcrrly has had a effect...

Hughes, William F.; Magee, A. C.

1960-01-01T23:59:59.000Z

251

A component GARCH model with time varying weights  

E-Print Network [OSTI]

2007/19 A component GARCH model with time varying weights Luc Bauwens and Giuseppe Storti #12;CORE DISCUSSION PAPER 2007/19 A component GARCH model with time varying weights Luc BAUWENS1 and Giuseppe STORTI2 March2007 Abstract We present a novel GARCH model that accounts for time varying, state dependent

Nesterov, Yurii

252

Computing Symmetrized Weight Enumerators for Lifted Quadratic Residue Codes  

E-Print Network [OSTI]

Computing Symmetrized Weight Enumerators for Lifted Quadratic Residue Codes I. M. Duursma Dept for the computation of structural parameters for ring-linear codes. This article therefore presents a method to eÃ?ciently compute weight enumerators of linear codes over primary integer residue rings. For the lifted QR-codes

Duursma, Iwan M.

253

Codes of constant Lee or Euclidean weight Jay A. Wood  

E-Print Network [OSTI]

Codes of constant Lee or Euclidean weight Jay A. Wood Department of Mathematics, Computer Science & Statistics Purdue University Calumet Hammond, Indiana 46323 2094 USA wood@calumet.purdue.edu http: www.calumet.purdue.edu public math wood Abstract. Carlet 2 has determined the linear codes over Z=4 of constant Lee weight

Wood, Jay

254

Weighted Hypothesis Testing Larry Wasserman and Kathryn Roeder1  

E-Print Network [OSTI]

loss remains nearly constant. specified weights, but minute power loss for poorly specified weights; and (ii) in the non-sparse case, under weak conditions, the worst case power loss for poorly specified the potential power loss. Figure 2 shows the non-sparse case. The plots on the left show the power as a function

255

A Nonempirical Test on the Weight of Pseudorandom Number Generators  

E-Print Network [OSTI]

A Nonempirical Test on the Weight of Pseudorandom Number Generators Makoto Matsumoto1 and Takuji introduce a theoretical test, named weight discrepancy test, on pseu- dorandom number generators. This test selected. This test can be performed for most generators based on a linear recursion over the two

Matsumoto, Makoto

256

The Complexity of Weighted Boolean #CSP with Mixed Signs  

E-Print Network [OSTI]

The Complexity of Weighted Boolean #CSP with Mixed Signs Andrei Bulatova , Martin Dyerb , Leslie constraint satisfaction problem (CSP), which corresponds to the case where all functions in have range {0, 1}. The problem we consider here is to compute the partition function of a given instance of weighted CSP; that is

Bulatov, Andrei

257

STATE OF CALIFORNIA AREA WEIGHTED AVERAGE CALCULATION WORKSHEET: RESIDENTIAL  

E-Print Network [OSTI]

STATE OF CALIFORNIA AREA WEIGHTED AVERAGE CALCULATION WORKSHEET: RESIDENTIAL CEC-WS-2R (Revised 08/09) CALIFORNIA ENERGY COMMISSION Area Weighted Average Calculation Worksheet WS-2R Residential (Page 1 of 1) Site/Time: ____________________ HERS Provider: __________________ 2008 Residential Compliance Forms August 2009 This worksheet should

258

Implementing Weighted Abduction in Markov Logic James Blythe  

E-Print Network [OSTI]

Implementing Weighted Abduction in Markov Logic James Blythe USC ISI blythe@isi.edu Jerry R. Hobbs@cs.utexas.edu Abstract Abduction is a method for finding the best explanation for observations. Arguably the most advanced approach to abduction, especially for natural language processing, is weighted abduction, which

Anderson, Richard

259

Extreme pressure fluid sample transfer pump  

DOE Patents [OSTI]

A transfer pump for samples of fluids at very low or very high pressures comprising a cylinder having a piston sealed with an O-ring, the piston defining forward and back chambers, an inlet and exit port and valve arrangement for the fluid to enter and leave the forward chamber, and a port and valve arrangement in the back chamber for adjusting the pressure across the piston so that the pressure differential across the piston is essentially zero and approximately equal to the pressure of the fluid so that the O-ring seals against leakage of the fluid and the piston can be easily moved, regardless of the pressure of the fluid. The piston may be actuated by a means external to the cylinder with a piston rod extending through a hole in the cylinder sealed with a bellows attached to the piston head and the interior of the back chamber.

Halverson, Justin E. (Grovertown, GA); Bowman, Wilfred W. (North Augusta, SC)

1990-01-01T23:59:59.000Z

260

Applications of adjustable speed drives. (Latest citations from the EI Compendex*plus database). Published Search  

SciTech Connect (OSTI)

The bibliography contains citations concerning types and applications of adjustable speed drives (ASD). Uses in heat pumps, fans, compressors, electric motors, boiler feed systems, and power transmission are described. Coverage includes AC-DC motors, induction motors, and brushless electric motors. Energy cost savings are also examined. (Contains a minimum of 102 citations and includes a subject term index and title list.)

Not Available

1994-06-01T23:59:59.000Z

Note: This page contains sample records for the topic "adjusted sampling weight" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

The Adjustment of Avian Metabolic Rates and Water Fluxes to Desert Environments  

E-Print Network [OSTI]

ambient air temperatures (Ta), low primary productivity, and lack of surface water place deserts among and Seely 1982; Williams and Tieleman 2000b). Likewise, lack of surface water ostensibly limits water intake461 The Adjustment of Avian Metabolic Rates and Water Fluxes to Desert Environments B. Irene

Williams, Jos. B.

262

Hydraulic adjustment of Scots pine across Europe J. Martnez-Vilalta1,2  

E-Print Network [OSTI]

Research Hydraulic adjustment of Scots pine across Europe J. Martínez-Vilalta1,2 , H. Cochard3), 8903 Birmensdorf, Switzerland Summary · The variability of branch-level hydraulic properties, xylem anatomy, sapwood- and leaf-specific hydraulic conductivity (KS and KL), vulnerability to embolism

Mencuccini, Maurizio

263

Estimating Carbon Leakage and the Efficiency of Border Adjustments in General Equilibrium -  

E-Print Network [OSTI]

emissions, it is feared that production of carbon-intensive goods will be shifted to countries which have-right rebating schemes or border carbon adjustments (BCAs) - which can include carbon-intensity based tariffs in highly carbon-intensive sectors. Indeed, another strand of literature relying on sector-specific partial

264

Mode-Locked Fiber Lasers Using Adjustable Saturable Absorption in Vertically Aligned Carbon Nanotubes  

E-Print Network [OSTI]

Mode-Locked Fiber Lasers Using Adjustable Saturable Absorption in Vertically Aligned Carbon, carbon nanotube Passively mode-locked fiber lasers have been used in many applications in various fields or the cleaved fiber end.5) In these studies, we used single-walled carbon nanotubes (SWNTs) whose axial

Maruyama, Shigeo

265

Contrasted sediment processes and morphological adjustments in three successive cutoff meanders of the Danube delta  

E-Print Network [OSTI]

Contrasted sediment processes and morphological adjustments in three successive cutoff meanders impacts on the local distribution of river flow velocities, discharge, and sediment fluxes between and sediment and its impact on the hydrosedimentary processes in each channelized reach and adjacent former

266

Cyclical adjustment, capital-labor substitution and total factor productivity convergence East Germany after unification  

E-Print Network [OSTI]

Germany after unification Werner Smolny, University of Ulm June 22, 2011 Abstract Despite rapid economic of Ulm 89069 Ulm, GERMANY Tel.: (49) 731 50 24260, Fax: (49) 731 50 24262 e-mail: Werner.Smolny@uni-ulm.de This paper is part of the research projects "Productivity adjustment in East Germany"and "Investment in East

Pfeifer, Holger

267

LM117/LM317A/LM317 3-Terminal Adjustable Regulator  

E-Print Network [OSTI]

LM117/LM317A/LM317 3-Terminal Adjustable Regulator General Description The LM117 series, the LM117 is packaged in standard transistor packages which are easily mounted and handled. In addition to higher performance than fixed regulators, the LM117 series offers full overload protection available only

Jain, Amit

268

A Bias-Adjusted LM Test of Error Cross Section Independence  

E-Print Network [OSTI]

. The exact mean and variance of the Lagrange multiplier (LM) test statistic are provided for the purpose of the bias-adjustments, and it is shown that the proposed tests have a standard normal distribution for the fixed time series dimension (T) as the cross...

Pesaran, M Hashem; Ullah, Aman; Yamagata, Takashi

269

Structuring and integrating human knowledge in demand forecasting: a judgmental adjustment approach  

E-Print Network [OSTI]

1 Structuring and integrating human knowledge in demand forecasting: a judgmental adjustment.cheikhrouhou@epfl.ch Abstract Demand forecasting consists of using data of the past demand to obtain an approximation of the future demand. Mathematical approaches can lead to reliable forecasts in deterministic context through

Paris-Sud XI, Université de

270

A Nonparametric Matching Method for Covariate Adjustment with Application to Economic Evaluation  

E-Print Network [OSTI]

A Nonparametric Matching Method for Covariate Adjustment with Application to Economic Evaluation of propensity score and Mahalanobis distance matching. We apply Genetic Matching to an economic evaluation and nonparametric methods; observational stud- ies; health economic evaluation #12;1 Introduction Progress has been

Sekhon, Jasjeet S.

271

Impact of Inductor Placement on the Performance of Adjustable Speed Drives Under Input Voltage Unbalance and  

E-Print Network [OSTI]

Engineering Dr. Madison, WI 53706 #12;IEEE 2005 International Electric Machines and Drives Conference (IEMDC on the induction machine performance characteristics, but the presence of an LC filter in the drive's input2005-07 Impact of Inductor Placement on the Performance of Adjustable Speed Drives Under Input

Lipo, Thomas

272

Using Electronic Adjustable Speed Drives for Efficiency Improvement and Cost Reduction  

E-Print Network [OSTI]

U.S. industry and utilities have been using ac adjustable speed drives (ASDs) for more than 50 years. ASDs utilize power electronics technology to control the flow of power to an ac motor, thereby controlling the motor’s speed and rate of energy...

Friedman, N. R.

273

Z .Global and Planetary Change 20 1999 93123 Global sea level rise and glacial isostatic adjustment  

E-Print Network [OSTI]

adjustment W.R. Peltier ) Department of Physics, UniÕersity of Toronto, 60 St. George Street, Toronto-mail: peltier@atmosp.physics.utoronto.ca Z .rather recently Peltier and Tushingham, 1989 , it was not clearly;( )W.R. PeltierrGlobal and Planetary Change 20 1999 93­12394 Z .existed at that time e.g., Peltier

Peltier, W. Richard

274

The Adjustable Grid: A Grid-Based Cursor Control Solution using Speech Recognition  

E-Print Network [OSTI]

The Adjustable Grid: A Grid-Based Cursor Control Solution using Speech Recognition Tarif Haque1 of grid-based cursor control systems using speech recognition have been developed. These systems typically overlay a numbered 3x3 grid on the screen and allow the user to recursively drill the cursor down

Gray, Jeffrey G.

275

Consumption-Based Adjustment of China's Emissions-Intensity Targets: An  

E-Print Network [OSTI]

China's Twelfth Five-Year Plan (2011­2015) aims to achieve a national carbon intensity reduction of 17Consumption-Based Adjustment of China's Emissions-Intensity Targets: An Analysis of its Potential & Climate Project TSINGHUA - MIT #12;The MIT Joint Program on the Science and Policy of Global Change

276

Department of Mechanical and Nuclear Engineering Fall 2010 Wind Tunnel Automated Bicycle Adjustment System  

E-Print Network [OSTI]

PENN STATE Department of Mechanical and Nuclear Engineering Fall 2010 Wind Tunnel Automated Bicycle with the development of Aerofit's prototype portable wind tunnel used in the aerodynamic testing of bicycles was to automate this adjustment of the bicycle seat and aerobars in order to decrease the time for fitting each

Demirel, Melik C.

277

Gage for measuring displacements in rock samples  

DOE Patents [OSTI]

A gage for measuring diametral displacement within a rock sample for use in a rock mechanics laboratory and in the field, comprises a support ring housing a linear variable differential transformer, a mounting screw, and a leaf spring. The mounting screw is adjustable and defines a first point of contact with the rock sample. The leaf spring has opposite ends fixed to the inner periphery of the mounting ring. An intermediate portion of the leaf spring projecting radially inward from the ring is formed with a dimple defining a second point of contact with the sample. The first and second points of contact are diametrically opposed to each other. The LVDT is mounted in the ring with its axis parallel to the line of measurement and its core rod received in the dimple of the leaf spring. Any change in the length of the line between the first and second support points is directly communicated to the LVDT. The leaf spring is rigid to completely support lateral forces so that the LVDT is free of all load for improved precision.

Holcomb, David J. (Albuquerque, NM); McNamee, Michael J. (Albuquerque, NM)

1986-01-01T23:59:59.000Z

278

Sampled data lattice filters  

E-Print Network [OSTI]

SAMPLED DATA LATTICE FILTERS A Thesis by WILLIAM TERRY THRIFT III Submitted to the Graduate College of Texas A&M University in partial fulfillment of the requirements for the degree of MASTER OF SCIENCE December 1979 Major Subfect...: Electrical Engineering SAMPLED DATA LATTICE FILTERS A Thesis by WILLIAM TERRY THRIFT III Approved as to style and content by: (Chair an of Committee) (Hea f Department) (Member) (Member) (Member) (Member) December 1979 ABSTRACT Sampled Data...

Thrift, William Terry

1980-01-01T23:59:59.000Z

279

Rehabilitation Services Sample Occupations  

E-Print Network [OSTI]

/Industries Correction Agencies Drug Treatment Centers Addiction Counselor Advocacy Occupations Art Therapist BehavioralRehabilitation Services Sample Occupations Sample Work Settings Child & Day Care Centers Clinics................................ IIB 29-1000 E4 Careers in Counseling and Human Services .........IIB 21-1010 C7 Careers in Health Care

Ronquist, Fredrik

280

Sampling system and method  

DOE Patents [OSTI]

The present disclosure provides an apparatus and method for coupling conduit segments together. A first pump obtains a sample and transmits it through a first conduit to a reservoir accessible by a second pump. The second pump further conducts the sample from the reservoir through a second conduit.

Decker, David L.; Lyles, Brad F.; Purcell, Richard G.; Hershey, Ronald Lee

2013-04-16T23:59:59.000Z

Note: This page contains sample records for the topic "adjusted sampling weight" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

On-line microdialysis sample cleanup for electrospray ionization mass spectrometry of nucleic acid samples  

SciTech Connect (OSTI)

A major limitation of electrospray ionization mass spectrometry (ESI-MS) for oligonucleotide analysis arises due to sodium adduction, a problem that increases with molecular weight. Sodium adduction can preclude useful measurements when limited sample sizes prevent off-line cleanup. A novel and generally useful on-line microdialysis technique is described for the rapid (nearly 1-5 min) DNA sample cleanup for ESI-MS. Mass spectra of oligonucleotides of different size and sequence showing no significant sodium adduct peaks were obtained using the on-line microdialysis system with sodium chloride concentrations as high as 250 mM. Signal-to-noise ratios were also greatly enhanced compared to direct infusion of the original samples. By using ammonium acetate as the dialysis buffer, it was also found that the noncovalent association of double-stranded oligonucleotides could be preserved during the microdialysis process, allowing analysis by ESI-MS. 33 refs., 6 figs.

Liu, C.; Wu, Q.; Harms, A.C.; Smith, R.D. [Pacific Northwest National Lab., Richland, WA (United States)] [Pacific Northwest National Lab., Richland, WA (United States)

1996-09-15T23:59:59.000Z

282

Application of Quadrature Methods for Re-Weighting in Lattice QCD  

SciTech Connect (OSTI)

Re-weighting is a useful tool that has been employed in Lattice QCD in different contexts including, tuning the strange quark mass, approaching the light quark mass regime, and simulating electromagnetic fields on top of QCD gauge configurations. In case of re-weighting the sea quark mass, the re-weighting factor is given by the ratio of the determinants of two Dirac operators D{sub a} and D{sub b}. A popular approach for computing this ratio is to use a pseudofermion representation of the determinant of the composite operator {Omega} = D{sub a}(D{sub b}{sup {dagger}}D{sub b}){sup -1} D{sub a}{sup {dagger}}. Here, we study using quadrature methods together with noise vectors to compute the ratio of determinants. We show that, with quadrature methods each determinant can be computed separately using the operators {Omega}{sub a} = D{sub a}{sup {dagger}}D{sub a} and {Omega}{sub b} = D{sub b}{sup {dagger}} D{sub b}. We also discuss using bootstrap re-sampling to remove the bias from the determinant estimator.

Abdou Abdel-Rehim, William Detmold, Kostas Orginos

2011-12-01T23:59:59.000Z

283

Trends and inferred emissions of atmospheric high molecular weight perfluorocarbons  

E-Print Network [OSTI]

Atmospheric observations and atmospheric observation-based global emission estimates are presented for the five high molecular weight perfluorocarbons (PFCs): decafluorobutane (C 4 F 1 0 ), dodecafluoropentane (C5 F1 2 ), ...

Ivy, Diane Jean

2012-01-01T23:59:59.000Z

284

Optimization of parameters for coverage of low molecular weight proteins  

E-Print Network [OSTI]

Proteins with molecular weights of <25 kDa are involved in major biological processes such as ribosome formation, stress adaption (e.g., temperature reduction) and cell cycle control. Despite their importance, the coverage ...

Muller, Stephan A.

285

Human Growth and Body Weight Dynamics: An Integrative Systems Model  

E-Print Network [OSTI]

Quantifying human weight and height dynamics due to growth, aging, and energy balance can inform clinical practice and policy analysis. This paper presents the first mechanism-based model spanning full individual life and ...

Rahmandad, Hazhir

286

RELATIVE ONE-WEIGHT LINEAR CODES JAY A. WOOD  

E-Print Network [OSTI]

RELATIVE ONE-WEIGHT LINEAR CODES JAY A. WOOD In memory of Professor F. E. P. Hirzebruch, 17 October University. 1 #12;2 JAY A. WOOD G thus defines a linear functional (a "coordinate functional") on the k

Wood, Jay

287

An improved method for weighted least squares IIR filter design  

E-Print Network [OSTI]

Recently, a new method for IIR weighted least squares filter design has been proposed. In this method, the problem of approximating a desired frequency response using a rational function is solved using an iterative approach. After studying...

Davila-Pazmino, Javier

1999-01-01T23:59:59.000Z

288

abnormally weighting energy: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Next Page Last Page Topic Index 1 Is Dark Energy Abnormally Weighting? Astrophysics (arXiv) Summary: We present a new interpretation of...

289

Approximating the Minimum Spanning Tree Weight in Sublinear Time  

E-Print Network [OSTI]

Approximating the Minimum Spanning Tree Weight in Sublinear Time Bernard Chazelle #3; Ronitt a parameter 0 minimum spanning tree- components algorithm picks O(1=#15; 2 ) vertices in the graph and then grows \\local spanning trees" whose

Trevisan, Luca

290

Technology Portfolio Planning by Weighted Graph Analysis of System Architectures  

E-Print Network [OSTI]

Technology Portfolio Planning by Weighted Graph Analysis of System Architectures Peter Davison and Bruce Cameron Massachusetts Institute of Technology, Cambridge, MA 02139 Edward F. Crawley Skolkovo Institute of Science and Technology, Skolkovo 143025, Russia Abstract5 Many systems undergo significant

de Weck, Olivier L.

291

Weighted Flow Algorithms (WFA) for stochastic particle coagulation  

SciTech Connect (OSTI)

Stochastic particle-resolved methods are a useful way to compute the time evolution of the multi-dimensional size distribution of atmospheric aerosol particles. An effective approach to improve the efficiency of such models is the use of weighted computational particles. Here we introduce particle weighting functions that are power laws in particle size to the recently-developed particle-resolved model PartMC-MOSAIC and present the mathematical formalism of these Weighted Flow Algorithms (WFA) for particle coagulation and growth. We apply this to an urban plume scenario that simulates a particle population undergoing emission of different particle types, dilution, coagulation and aerosol chemistry along a Lagrangian trajectory. We quantify the performance of the Weighted Flow Algorithm for number and mass-based quantities of relevance for atmospheric sciences applications.

DeVille, R.E.L., E-mail: rdeville@illinois.edu [Department of Mathematics, University of Illinois at Urbana-Champaign, 1409 W. Green Street, Urbana, IL 61801 (United States); Riemer, N., E-mail: nriemer@illinois.edu [Department of Atmospheric Science, University of Illinois at Urbana-Champaign, 105 S. Gregory Street, Urbana, IL 61801 (United States); West, M., E-mail: mwest@illinois.edu [Department of Mechanical Science and Engineering, University of Illinois at Urbana-Champaign, 1206 W. Green Street, Urbana, IL 61801 (United States)

2011-09-20T23:59:59.000Z

292

Biological sample collector  

DOE Patents [OSTI]

A biological sample collector is adapted to a collect several biological samples in a plurality of filter wells. A biological sample collector may comprise a manifold plate for mounting a filter plate thereon, the filter plate having a plurality of filter wells therein; a hollow slider for engaging and positioning a tube that slides therethrough; and a slide case within which the hollow slider travels to allow the tube to be aligned with a selected filter well of the plurality of filter wells, wherein when the tube is aligned with the selected filter well, the tube is pushed through the hollow slider and into the selected filter well to sealingly engage the selected filter well and to allow the tube to deposit a biological sample onto a filter in the bottom of the selected filter well. The biological sample collector may be portable.

Murphy, Gloria A. (French Camp, CA)

2010-09-07T23:59:59.000Z

293

Characterization Of Sample HTF-13-13-128  

SciTech Connect (OSTI)

Savannah River Remediation (SRR) has requested that Savannah River National Laboratory (SRNL) characterize a sample of Tank 13 in preparation for Sludge Batch 9 (SB9). A 200 mL sample of Tank 13 was received by SRNL on July 22, 2013 (Tank Farm sample ID HTF-13-13-128). Characterization of the sample to meet the requirements of the request is complete. Results include: visual observations; slurry and supernatant density; weight percent total and insoluble solids; supernatant characterization; total alpha, total beta, and several radionuclide analyses; and elemental analyses of the dried solids. The sample was very fluid. After settling overnight, there was a small layer of solids on the bottom of the sample container (a 250 mL HDPE bottle) with the remainder being clear supernatant. To better show the sludge solids relative to the overall sample, 25 mL of slurry was placed in a graduated cylinder and allowed to settle over a weekend (approximately 90 hours). The sludge layer was at the approximately 4 mL. The small visually observed quantity of insoluble solids was confirmed with a low weight percent insoluble solids of 0.94%.

Pareizs, J. M.

2013-09-25T23:59:59.000Z

294

SmartNode: Achieving 802.11 MAC Interoperability in Power-efficient Ad Hoc Networks with Dynamic Range Adjustments  

E-Print Network [OSTI]

, energy conservation may be achieved by dynamically adjusting transmission ranges on the fly at each node Range Adjustments Edmond Poon, Baochun Li£ Abstract The standard CSMA/CA based IEEE 802.11 protocol as conservation and higher system throughput through better spatial reuse of spectrum. In this work, we propose

Li, Baochun

295

890 IEEE TRANSACTIONS ON POWER ELECTRONICS, VOL. 21, NO. 4, JULY 2006 A Self-Adjusting Sinusoidal Power Source  

E-Print Network [OSTI]

Mordechai Peretz Abstract--A new self-adjusting current-fed push­pull parallel inverter (SA the amplitude, waveform and efficiency of the power driver. The current-fed push­pull resonant inverter (CFPPRI890 IEEE TRANSACTIONS ON POWER ELECTRONICS, VOL. 21, NO. 4, JULY 2006 A Self-Adjusting Sinusoidal

296

Adjustment of the Remote Tropical Climate to El Nio Conditions BENJAMIN R. LINTNER* AND JOHN C. H. CHIANG  

E-Print Network [OSTI]

convective heating anomalies that in turn cause remote tropical changes through a suite of tele- connectedAdjustment of the Remote Tropical Climate to El Niño Conditions BENJAMIN R. LINTNER* AND JOHN C. H) ABSTRACT The adjustment of the tropical climate outside the Pacific (the "remote Tropics") to the abrupt

Lintner, Benjamin Richard

297

Waste classification sampling plan  

SciTech Connect (OSTI)

The purpose of this sampling is to explain the method used to collect and analyze data necessary to verify and/or determine the radionuclide content of the B-Cell decontamination and decommissioning waste stream so that the correct waste classification for the waste stream can be made, and to collect samples for studies of decontamination methods that could be used to remove fixed contamination present on the waste. The scope of this plan is to establish the technical basis for collecting samples and compiling quantitative data on the radioactive constituents present in waste generated during deactivation activities in B-Cell. Sampling and radioisotopic analysis will be performed on the fixed layers of contamination present on structural material and internal surfaces of process piping and tanks. In addition, dose rate measurements on existing waste material will be performed to determine the fraction of dose rate attributable to both removable and fixed contamination. Samples will also be collected to support studies of decontamination methods that are effective in removing the fixed contamination present on the waste. Sampling performed under this plan will meet criteria established in BNF-2596, Data Quality Objectives for the B-Cell Waste Stream Classification Sampling, J. M. Barnett, May 1998.

Landsman, S.D.

1998-05-27T23:59:59.000Z

298

Cyclostrophic adjustment in swirling gas flows and the Ranque-Hilsch vortex tube effect  

SciTech Connect (OSTI)

A theoretical analysis of cyclostrophic adjustment is presented; i.e., adjustment to balance between pressure gradient and centrifugal force in axisymmetric flow of an inviscid gas is examined. The solution to the problem is represented as the sum of a time-independent (balanced) and time-dependent (wave) components. It is shown that the wave component of the flow in an unbounded domain decays with time, and the corresponding solution reduces to the balanced component. In a bounded domain, the balanced flow component exists against the background of undamped acoustic waves. It is found that the balanced flow is thermally stratified at Mach numbers close to unity, with a substantial decrease in gas temperature (to between -50 and -100 deg. C) in the axial region. This finding, combined with the results of special experiments, is used to explain the Ranque-Hilsch vortex tube effect.

Kalashnik, M. V., E-mail: lingel@obninsk.com; Visheratin, K. N. [SPA Typhoon (Russian Federation)], E-mail: kvisher@typhoon.obninsk.ru

2008-04-15T23:59:59.000Z

299

Use of parameter adjustment techniques in the simulation of multi-echelon inventory/distribution system  

E-Print Network [OSTI]

USE OF PARAMETER ADJUSTI4IENT TECHNIQUES IN THE SIMULATION OF A 11ULTI-ECHELON INVENTORY/DISTRIBUTION SYSTEM A Thesis by THOMAS JOHN DER TATEVASION Submitted to the Graduate College of Texas ARM University in partial fulfillment... of the requirement for the degree of MASTER OF SCIENCE August 1981 Major Subject: Industrial Engineering USE OF PARAMETER ADJUSTMENT TECHNIQUES IN THE SIMULATION OF A MULTI-ECHELOI'I INVENTORY/DISTRIBUTION SYSTEM A Thes1s by THOMAS JOHN DER TATEVASION...

Der Tatevasion, Thomas John

1981-01-01T23:59:59.000Z

300

Model 923-B Mouse Gas Anesthesia Head Holder Adaptor Adjustment Features  

E-Print Network [OSTI]

Model 923-B Mouse Gas Anesthesia Head Holder Adaptor Adjustment Features Dorsal/Ventral dial.352.3139 Toll Free: 1.877.352.3275 ^^ci&ion Q)e&i^n^^^r ^esea/H^/i Model 923-B Mouse Gas Anesthesia Head Holder 923B-1/07 #12;MODEL 923-B MOUSE GAS ANESTHESIA HEAD HOLDER The KOPF Mouse Gas Anesthesia Head Holder

Kleinfeld, David

Note: This page contains sample records for the topic "adjusted sampling weight" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

An investigation of irregular switching in three phase adjustable speed motor drives without neutral connection  

E-Print Network [OSTI]

Phase Adjustable Speed Motor Drives without Neutral Connection. (May 1990) Md. Shamsul Arefeen, B. S. , Bangladesh Univ. of Engg. 8z Technology Chair of Advisory Committee: Dr. M. Ehsani There are many industrial applications where variable speed... There are many industrial application where variable speed drives of electrical ma, - chines are needed. This requirement of high performance electric drives can be met either by a. dc or by an ac machine. Due to cost and ease of control, high performance...

Arefeen, Shamsal

1990-01-01T23:59:59.000Z

302

Water Sample Concentrator  

ScienceCinema (OSTI)

Automated portable device that concentrates and packages a sample of suspected contaminated water for safe, efficient transport to a qualified analytical laboratory. This technology will help safeguard against pathogen contamination or chemical and biolog

Idaho National Laboratory

2010-01-08T23:59:59.000Z

303

Evolving Adjustments to External (Gamma) Slope Factors for CERCLA Risk and Dose Assessments - 12290  

SciTech Connect (OSTI)

To model the external exposure pathway in risk and dose assessments of radioactive contamination at Superfund sites, the U.S. Environmental Protection Agency (EPA) uses slope factors (SFs), also known as risk coefficients, and dose conversion factors (DCFs). Without any adjustment these external radiation exposure pathways effectively assumes that an individual is exposed to a source geometry that is effectively an infinite slab. The concept of an 'infinite slab' means that the thickness of the contaminated zone and its aerial extent are so large that it behaves as if it were infinite in its physical dimensions. EPA has been making increasingly complex adjustments to account for the extent of the contamination and its corresponding radiation field to provide more accurate risk and dose assessment modeling when using its calculators. In most instances, the more accurate modeling results derived from these gamma adjustments are less conservative. The notable exception are for some radionuclides in rooms with contaminated walls, ceiling, and floors, and the receptor is in location of the room with the highest amount of radiation exposure, usually the corner of small rooms and the center of large conference rooms. (authors)

Walker, Stuart [U.S. Environmental Protection Agency (United States)

2012-07-01T23:59:59.000Z

304

Characterization of various bitumen samples from tar sands  

SciTech Connect (OSTI)

The authors have investigated twenty three bitumen samples obtained using different separation methods such as: ultracentrifugation, Dean-Stark extraction, solvent extraction employing vigorous agitation, hot water separation and the Solvent Extraction Spherical Agglomeration technique. These samples were extracted from oil sand feedstocks of different grades, Suncor sludge pond tailings and mineral agglomerates obtained form the Solvent Extraction Spherical Agglomeration process. All of the bitumen samples were examined on a comparative basis using various analytical techniques. These included: fractionation into asphaltenes and maltenes: elemental analyses; molecular weight determination using vapour pressure osmometry and gel permeation chromatography, infrared, proton and /sup 13/C nuclear magnetic resonance spectroscopy. Proton /sup 13/C n.m.r. spectroscopic data were used to determine the distribution of various types of hydrogens and carbons in the samples. These data were also used to derive various molecular parameters in order to investigate average molecular structures of different bitumen samples and some of their asphaltene fractions.

Majid, A.; Bornais, J.; Hutchison, R.A. (National Research Council of Canada, Ottawa, ON (Canada). Div. of Chemistry)

1989-01-01T23:59:59.000Z

305

Dissolution actuated sample container  

DOE Patents [OSTI]

A sample collection vial and process of using a vial is provided. The sample collection vial has an opening secured by a dissolvable plug. When dissolved, liquids may enter into the interior of the collection vial passing along one or more edges of a dissolvable blocking member. As the blocking member is dissolved, a spring actuated closure is directed towards the opening of the vial which, when engaged, secures the vial contents against loss or contamination.

Nance, Thomas A.; McCoy, Frank T.

2013-03-26T23:59:59.000Z

306

SAMPLING AND ANALYSIS PROTOCOLS  

SciTech Connect (OSTI)

Radiological sampling and analyses are performed to collect data for a variety of specific reasons covering a wide range of projects. These activities include: Effluent monitoring; Environmental surveillance; Emergency response; Routine ambient monitoring; Background assessments; Nuclear license termination; Remediation; Deactivation and decommissioning (D&D); and Waste management. In this chapter, effluent monitoring and environmental surveillance programs at nuclear operating facilities and radiological sampling and analysis plans for remediation and D&D activities will be discussed.

Jannik, T; P Fledderman, P

2007-02-09T23:59:59.000Z

307

Liquid sampling system  

DOE Patents [OSTI]

A conduit extends from a reservoir through a sampling station and back to the reservoir in a closed loop. A jet ejector in the conduit establishes suction for withdrawing liquid from the reservoir. The conduit has a self-healing septum therein upstream of the jet ejector for receiving one end of a double-ended cannula, the other end of which is received in a serum bottle for sample collection. Gas is introduced into the conduit at a gas bleed between the sample collection bottle and the reservoir. The jet ejector evacuates gas from the conduit and the bottle and aspirates a column of liquid from the reservoir at a high rate. When the withdrawn liquid reaches the jet ejector the rate of flow therethrough reduces substantially and the gas bleed increases the pressure in the conduit for driving liquid into the sample bottle, the gas bleed forming a column of gas behind the withdrawn liquid column and interrupting the withdrawal of liquid from the reservoir. In the case of hazardous and toxic liquids, the sample bottle and the jet ejector may be isolated from the reservoir and may be further isolated from a control station containing remote manipulation means for the sample bottle and control valves for the jet ejector and gas bleed. 5 figs.

Larson, L.L.

1984-09-17T23:59:59.000Z

308

Fixture for supporting and aligning a sample to be analyzed in an x-ray diffraction apparatus  

DOE Patents [OSTI]

A fixture is provided for supporting and aligning small samples of material on a goniometer for x-ray diffraction analysis. A sample-containing capillary is accurately positioned for rotation in the x-ray beam by selectively adjusting the fixture to position the capillary relative to the x and y axes thereof to prevent wobble and position the sample along the z axis or the axis of rotation. By employing the subject fixture relatively small samples of materials can be analyzed in an x-ray diffraction apparatus previously limited to the analysis of much larger samples.

Green, L.A.; Heck, J.L. Jr.

1985-04-23T23:59:59.000Z

309

Fluid sampling system  

DOE Patents [OSTI]

An fluid sampling system allows sampling of radioactive liquid without spillage. A feed tank is connected to a liquid transfer jet powered by a pumping chamber pressurized by compressed air. The liquid is pumped upwardly into a sampling jet of a venturi design having a lumen with an inlet, an outlet, a constricted middle portion, and a port located above the constricted middle portion. The liquid is passed under pressure through the constricted portion causing its velocity to increase and its pressure to be decreased, thereby preventing liquid from escaping. A septum sealing the port can be pierced by a two pointed hollow needle leading into a sample bottle also sealed by a pierceable septum affixed to one end. The bottle is evacuated by flow through the sample jet, cyclic variation in the sampler jet pressure periodically leaves the evacuated bottle with lower pressure than that of the port, thus causing solution to pass into the bottle. The remaining solution in the system is returned to the feed tank via a holding tank. 4 figs.

Houck, E.D.

1994-10-11T23:59:59.000Z

310

Fluid sampling system  

DOE Patents [OSTI]

An fluid sampling system allows sampling of radioactive liquid without spillage. A feed tank is connected to a liquid transfer jet powered by a pumping chamber pressurized by compressed air. The liquid is pumped upwardly into a sampling jet of a venturi design having a lumen with an inlet, an outlet, a constricted middle portion, and a port located above the constricted middle portion. The liquid is passed under pressure through the constricted portion causing its velocity to increase and its pressure to decreased, thereby preventing liquid from escaping. A septum sealing the port can be pierced by a two pointed hollow needle leading into a sample bottle also sealed by a pierceable septum affixed to one end. The bottle is evacuated by flow through the sample jet, cyclic variation in the sampler jet pressure periodically leaves the evacuated bottle with lower pressure than that of the port, thus causing solution to pass into the bottle. The remaining solution in the system is returned to the feed tank via a holding tank.

Houck, Edward D. (Idaho Falls, ID)

1994-01-01T23:59:59.000Z

311

Development of age of dam and sex adjustment factors for preweaning traits of Brangus cattle  

E-Print Network [OSTI]

supplied on Brangus cattle enrolled in the BHIR by the IBBA. The data consisted of 103, 620 preweaning records from 1962 through 1988. Variables pertinent to the analyses were sire, age of dam, sex of calf, month of birth, year of birth, age at weaning... calf records reduced the data set size to approximately 55, 000 records. Further editing included records with birth weights less than 18. 14 kg and greater than 63. 50 kg, because calves outside of this weight range would be very rare or would...

Cravey, Matthew David

1989-01-01T23:59:59.000Z

312

Viscous sludge sample collector  

DOE Patents [OSTI]

A vertical core sample collection system for viscous sludge. A sample tube's upper end has a flange and is attached to a piston. The tube and piston are located in the upper end of a bore in a housing. The bore's lower end leads outside the housing and has an inwardly extending rim. Compressed gas, from a storage cylinder, is quickly introduced into the bore's upper end to rapidly accelerate the piston and tube down the bore. The lower end of the tube has a high sludge entering velocity to obtain a full-length sludge sample without disturbing strata detail. The tube's downward motion is stopped when its upper end flange impacts against the bore's lower end inwardly extending rim.

Beitel, George A [Richland, WA

1983-01-01T23:59:59.000Z

313

Low-temperature oxidative degradation of PBX 9501 and its components determined via molecular weight analysis of the poly [ester urethane] binder  

SciTech Connect (OSTI)

The results of following the oxidative degradation of a plastic-bonded explosive (PBX 9501) are reported. Into over 1100 sealed containers were placed samples of PBX 9501 and combinations of its components and aged at relatively low temperatures to induce oxidative degradation of the samples. One of the components of the explosive is a poly(ester urethane) polymer and the oxidative degradation of the samples were following by measuring the molecular weight change of the polymer by gel permeation chromatography (coupled with both differential refractive index and multiangle laser light scattering detectors). Multiple temperatures between 40 and 64 {sup o}C were used to accelerate the aging of the samples. Interesting induction period behavior, along with both molecular weight increasing (crosslinking) and decreasing (chain scissioning) processes, were found at these relatively mild conditions. The molecular weight growth rates were fit to a random crosslinking model for all the combinations of components. The fit rate coefficients show Arrhenius behavior and activation energies and frequency factors were obtained. The kinetics of molecular weight growth shows a compensatory effect between the Arrhenius prefactors and activation energies, suggesting a common degradation process between PBX 9501 and the various combinations of its constituents. An oxidative chemical mechanism of the polymer is postulated, consistent with previous experimental results, that involves a competition between urethane radical crosslinking and carbonyl formation.

Kress, Joel D [Los Alamos National Laboratory

2008-01-01T23:59:59.000Z

314

Temperature and magnetic field dependent optical spectral weight in the cation-deficient colossal-magnetoresistance material La0.936Mn0.982O3  

E-Print Network [OSTI]

with the general arguments, a broad peak has been observed in 1 various Mn-based CMR materials by several groupsTemperature and magnetic field dependent optical spectral weight in the cation-deficient colossal on single-crystal samples as a function of temperature and at zero and 0.5 T magnetic fields

Homes, Christopher C.

315

Environmental Science: Sample Pathway  

E-Print Network [OSTI]

Environmental Science: Sample Pathway Semester I Semester II Freshman Year CGS Core CGS Core GE 100 Intro to Env Science ES 105 Env Earth Science Sophomore Year CGS Core (CGS NS201 will fulfill CAS BI107 & 124) MA 115 Statistics Summer Environmental Internship Junior Year CH 171 Chem for Health Sciences CH

Goldberg, Bennett

316

Denial of Service attacks: path reconstruction for IP traceback using Adjusted Probabilistic Packet Marking  

E-Print Network [OSTI]

and Ramamohanarao [18] propose a marking scheme wherein routers mark the packets with a adjusted probability. The packet marking probability is inversely proportional to the number of hops of the router from the source of the packet. The marking probability..., Peng, Leckie and Ramamohanarao [18] propose a mark- ing probability, pd = 1/d, where d is the distance (number of hops) of the router from the source of the packet. Assume an attack path of length k. By this we mean that there are k routers...

Dube, Raghav

2005-02-17T23:59:59.000Z

317

Information Basic to Farm Adjustments in the High Plains Cotton Area of Texas.  

E-Print Network [OSTI]

by the Texas Agricultural Experiment Station. A limited number of these machines were manufactured for distribution in 1943 and more will be available in 1944. Two men using a two-row ma- chine of this type will harvest as much cotton per day as 14 to 16... duced tion : the o. was I result Study Area earnil the n en t~ri these 'I opera 2:-. 11i-e r recorc ductic Seven --- motor the S. to ch: metho F the st area, FOK~VIATION BASIC TO FARM ADJUSTMENTS IN THE HIGH PLAINS COTTON AREA...

Thibodeaux, B. H. (Ben Hur); Bonnen, C. A. (Clarence Alfred); Magee, A. C. (Aden Combs)

1944-01-01T23:59:59.000Z

318

Liquid fuel vaporizer and combustion chamber having an adjustable thermal conductor  

DOE Patents [OSTI]

The efficiency and effectiveness of apparatuses for vaporizing and combusting liquid fuel can be improved using thermal conductors. For example, an apparatus having a liquid fuel vaporizer and a combustion chamber can be characterized by a thermal conductor that conducts heat from the combustion chamber to the vaporizer. The thermal conductor can be a movable member positioned at an insertion depth within the combustion chamber that corresponds to a rate of heat conduction from the combustion chamber to the vaporizer. The rate of heat conduction can, therefore, be adjusted by positioning the movable member at a different insertion depth.

Powell, Michael R; Whyatt, Greg A; Howe, Daniel T; Fountain, Matthew S

2014-03-04T23:59:59.000Z

319

Adjustable, rapidly switching microfluidic gradient generation using focused travelling surface acoustic waves  

SciTech Connect (OSTI)

We demonstrate a simple device to generate chemical concentration gradients in a microfluidic channel using focused travelling surface acoustic waves (F-TSAW). A pair of curved interdigitated metal electrodes deposited on the surface of a piezoelectric (LiNbO{sub 3}) substrate disseminate high frequency sound waves when actuated by an alternating current source. The F-TSAW produces chaotic acoustic streaming flow upon its interaction with the fluid inside a microfluidic channel, which mixes confluent streams of chemicals in a controlled fashion for an adjustable and rapidly switching gradient generation.

Destgeer, Ghulam; Im, Sunghyuk; Hang Ha, Byung; Ho Jung, Jin; Ahmad Ansari, Mubashshir; Jin Sung, Hyung, E-mail: hjsung@kaist.ac.kr [Department of Mechanical Engineering, KAIST, 291 Daejak-ro, Yuseong-gu, Daejeon 305-701 (Korea, Republic of)

2014-01-13T23:59:59.000Z

320

Information Basic to Farm Adjustments in the Rolling Plains Area of Texas.  

E-Print Network [OSTI]

, affeptiny but few farms. Because of the local nature of hail storms they may have no widespread effect upon farm incomes, but may cause partial or complete crop failures on a few farms. Damage to young crors from wind results through the rapid movement...A. B. CONNER. DIRECTOR \\ College Station, Texas \\ i 'i RULLETIS SO. 61'1 SEPTEJPEER 1942 I -4. INFORMATION BASIC TO FARM ADJUST- BTENTS IN THE ROLLING PLAIXS AREA4 OF TEXAS Di~sion of Farm nncl Xwnch Economics 3ULTURAL AND MECH...

Bonnen, C. A. (Clarence Alfred); Czarowitz, P. H. (Philmore Hempel)

1942-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "adjusted sampling weight" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

U.S. Coalbed Methane Proved Reserves Adjustments (Billion Cubic Feet)  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelinesProved ReservesFeet)per Thousand28 198 18 Q 10 14.0 12.2 1.1 QPDFL1.Adjustments

322

U.S. Dry Natural Gas Reserves Adjustments (Billion Cubic Feet)  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines AboutDecemberSteamYearTexas--State OffshoreProductionAdjustments (Billion Cubic Feet)

323

U.S. Natural Gas Plant Liquids, Reserves Adjustments (Million Barrels)  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines AboutDecemberSteamYearTexas--StateWinter 2013-14DeliveriesProved ReservesAdjustments

324

Property:OpenEI/UtilityRate/DemandRateStructure/Tier6Adjustment | Open  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy ResourcesLoadingPenobscot County,ContAddr2NumberOfPrograms JumpEnergy Information Tier6Adjustment

325

STANDARD STRATIFICATIONS OF EI CATEGORIES AND ALPERIN'S WEIGHT CONJECTURE  

E-Print Network [OSTI]

STANDARD STRATIFICATIONS OF EI CATEGORIES AND ALPERIN'S WEIGHT CONJECTURE PETER WEBB Abstract. We characterize the finite EI categories whose rep­ resentations are standardly stratified with respect and a theorem of Dlab, which have elsewhere been described for standardly stratified algebras where

Webb, Peter

326

STANDARD STRATIFICATIONS OF EI CATEGORIES AND ALPERIN'S WEIGHT CONJECTURE  

E-Print Network [OSTI]

STANDARD STRATIFICATIONS OF EI CATEGORIES AND ALPERIN'S WEIGHT CONJECTURE PETER WEBB Abstract. We characterize the finite EI categories whose rep- resentations are standardly stratified with respect and a theorem of Dlab, which have elsewhere been described for standardly stratified algebras where

Webb, Peter

327

Codes of constant Lee or Euclidean weight Jay A. Wood  

E-Print Network [OSTI]

Codes of constant Lee or Euclidean weight Jay A. Wood Department of Mathematics, Computer Science & Statistics Purdue University Calumet Hammond, Indiana 46323--2094 USA wood@calumet.purdue.edu http://www.calumet.purdue.edu/public/math/wood Scholarly Research Awards. #12; JAY A. WOOD 1. Linear codes as modules Throughout this extended abstract

Wood, Jay

328

Maximum Likelihood Sub-band Weighting for Robust Speech Recognition  

E-Print Network [OSTI]

, bins of log filter-band energy (FBE) in each sub-band are multiplied with a weighting factor depending on the reliability of the sub-band. For each sub-band, zero padding is performed on the log FBE vector lengthening. For the DCT has the size of full-band FBE vector, the feature vector consists of the correlations across

329

The Weight of Words Construction and Implications of  

E-Print Network [OSTI]

The Weight of Words Construction and Implications of Genocide Discourse in Bosnia and Sudan #12 Genocide 1975-1979 - 2,000,000 Deaths Rwanda 1994 - 800,000 Deaths Bosnia Genocide 1992-1995 - 200 INEVITABLITY #12;Bosnia- background #12;"Ethnic Cleansing" Massacres Plundering of villages Rape Camps #12

New Hampshire, University of

330

Weights of Exact Threshold Functions Laszlo Babai1  

E-Print Network [OSTI]

, supported by a Villum Kann Rasmussen postdoc fellowship. Partially supported by grant 09-01-00709-a from of China Grant 60553001,60603005 and 60621062 and the National Basic Research Program of China Grant 2007CB807900,2007CB807901. #12;2 weights, and t is a real valued threshold. A threshold function on n Boolean

Babai, László

331

Stochastic Online Learning for Network Optimization under Unknown Random Weights  

E-Print Network [OSTI]

the results to general network optimization problems (e.g., minimum spanning tree and dominating set minimum spanning tree and minimum (connected) dominating set. Consider a communication network where1 Stochastic Online Learning for Network Optimization under Unknown Random Weights Keqin Liu

Zhao, Qing

332

Approximating the Minimum Spanning Tree Weight in Sublinear Time  

E-Print Network [OSTI]

Approximating the Minimum Spanning Tree Weight in Sublinear Time #3; Bernard Chazelle y Ronitt a parameter 0 minimum span- ning tree in the graph and then grows \\local spanning trees" whose sizes are speci#12;ed by a stochastic process. From

Goldwasser, Shafi

333

Weight and volume changing device with liquid metal transfer  

E-Print Network [OSTI]

This paper presents a weight-changing device based on the transfer of mass. We chose liquid metal (Ga-In-Tin eutectic) and a bi-directional pump to control the mass that is injected into or removed from a target object. ...

Niiyama, Ryuma

334

Fair Labor Standard Act and Service Contract Act Price Adjustment UT-B Contracts Div Page 1 of 1  

E-Print Network [OSTI]

Fair Labor Standard Act and Service Contract Act ­ Price Adjustment UT-B Contracts Div Sept 2009 Page 1 of 1 flsa-price-adj-ext-sept09.doc FAIR LABOR STANDARDS ACT AND SERVICE CONTRACT ACT - PRICE

Pennycook, Steve

335

Decoupled Sampling for Graphics Pipelines  

E-Print Network [OSTI]

We propose a generalized approach to decoupling shading from visibility sampling in graphics pipelines, which we call decoupled sampling. Decoupled sampling enables stochastic supersampling of motion and defocus blur at ...

Ragan-Kelley, Jonathan Millar

336

Fluid sampling apparatus and method  

DOE Patents [OSTI]

Incorporation of a bellows in a sampling syringe eliminates ingress of contaminants, permits replication of amounts and compression of multiple sample injections, and enables remote sampling for off-site analysis. 3 figs.

Yeamans, D.R.

1998-02-03T23:59:59.000Z

337

Sample introducing apparatus and sample modules for mass spectrometer  

DOE Patents [OSTI]

An apparatus for introducing gaseous samples from a wide range of environmental matrices into a mass spectrometer for analysis of the samples is described. Several sample preparing modules including a real-time air monitoring module, a soil/liquid purge module, and a thermal desorption module are individually and rapidly attachable to the sample introducing apparatus for supplying gaseous samples to the mass spectrometer. The sample-introducing apparatus uses a capillary column for conveying the gaseous samples into the mass spectrometer and is provided with an open/split interface in communication with the capillary and a sample archiving port through which at least about 90 percent of the gaseous sample in a mixture with an inert gas that was introduced into the sample introducing apparatus is separated from a minor portion of the mixture entering the capillary discharged from the sample introducing apparatus.

Thompson, Cyril V. (Knoxville, TN); Wise, Marcus B. (Kingston, TN)

1993-01-01T23:59:59.000Z

338

Sample introducing apparatus and sample modules for mass spectrometer  

DOE Patents [OSTI]

An apparatus for introducing gaseous samples from a wide range of environmental matrices into a mass spectrometer for analysis of the samples is described. Several sample preparing modules including a real-time air monitoring module, a soil/liquid purge module, and a thermal desorption module are individually and rapidly attachable to the sample introducing apparatus for supplying gaseous samples to the mass spectrometer. The sample-introducing apparatus uses a capillary column for conveying the gaseous samples into the mass spectrometer and is provided with an open/split interface in communication with the capillary and a sample archiving port through which at least about 90 percent of the gaseous sample in a mixture with an inert gas that was introduced into the sample introducing apparatus is separated from a minor portion of the mixture entering the capillary discharged from the sample introducing apparatus. 5 figures.

Thompson, C.V.; Wise, M.B.

1993-12-21T23:59:59.000Z

339

Expanded Prussian Blue Analogues Incorporating [Re6Se8(CN)6]3-/4-Clusters: Adjusting Porosity via Charge Balance  

E-Print Network [OSTI]

Expanded Prussian Blue Analogues Incorporating [Re6Se8(CN)6]3-/4- Clusters: Adjusting Porosity via of octahedral [M(CN)6]3-/4- complexes for the synthesis of microporous Prussian blue type solids with adjustable to be a direct expansion of Prussian blue (Fe4[Fe(CN)6]3,14H2O), with [Re6Se8(CN)6]4- clusters connected through

Shores, Matthew P.

340

Soil sampling kit and a method of sampling therewith  

DOE Patents [OSTI]

A soil sampling device and a sample containment device for containing a soil sample is disclosed. In addition, a method for taking a soil sample using the soil sampling device and soil sample containment device to minimize the loss of any volatile organic compounds contained in the soil sample prior to analysis is disclosed. The soil sampling device comprises two close fitting, longitudinal tubular members of suitable length, the inner tube having the outward end closed. With the inner closed tube withdrawn a selected distance, the outer tube can be inserted into the ground or other similar soft material to withdraw a sample of material for examination. The inner closed end tube controls the volume of the sample taken and also serves to eject the sample. The soil sample containment device has a sealing member which is adapted to attach to an analytical apparatus which analyzes the volatile organic compounds contained in the sample. The soil sampling device in combination with the soil sample containment device allow an operator to obtain a soil sample containing volatile organic compounds and minimizing the loss of the volatile organic compounds prior to analysis of the soil sample for the volatile organic compounds.

Thompson, Cyril V. (Knoxville, TN)

1991-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "adjusted sampling weight" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Soil sampling kit and a method of sampling therewith  

DOE Patents [OSTI]

A soil sampling device and a sample containment device for containing a soil sample is disclosed. In addition, a method for taking a soil sample using the soil sampling device and soil sample containment device to minimize the loss of any volatile organic compounds contained in the soil sample prior to analysis is disclosed. The soil sampling device comprises two close fitting, longitudinal tubular members of suitable length, the inner tube having the outward end closed. With the inner closed tube withdrawn a selected distance, the outer tube can be inserted into the ground or other similar soft material to withdraw a sample of material for examination. The inner closed end tube controls the volume of the sample taken and also serves to eject the sample. The soil sample containment device has a sealing member which is adapted to attach to an analytical apparatus which analyzes the volatile organic compounds contained in the sample. The soil sampling device in combination with the soil sample containment device allows an operator to obtain a soil sample containing volatile organic compounds and minimizing the loss of the volatile organic compounds prior to analysis of the soil sample for the volatile organic compounds. 11 figures.

Thompson, C.V.

1991-02-05T23:59:59.000Z

342

Bulk Data Movement for Climate Dataset: Efficient Data Transfer Management with Dynamic Transfer Adjustment  

SciTech Connect (OSTI)

Many scientific applications and experiments, such as high energy and nuclear physics, astrophysics, climate observation and modeling, combustion, nano-scale material sciences, and computational biology, generate extreme volumes of data with a large number of files. These data sources are distributed among national and international data repositories, and are shared by large numbers of geographically distributed scientists. A large portion of data is frequently accessed, and a large volume of data is moved from one place to another for analysis and storage. One challenging issue in such efforts is the limited network capacity for moving large datasets to explore and manage. The Bulk Data Mover (BDM), a data transfer management tool in the Earth System Grid (ESG) community, has been managing the massive dataset transfers efficiently with the pre-configured transfer properties in the environment where the network bandwidth is limited. Dynamic transfer adjustment was studied to enhance the BDM to handle significant end-to-end performance changes in the dynamic network environment as well as to control the data transfers for the desired transfer performance. We describe the results from the BDM transfer management for the climate datasets. We also describe the transfer estimation model and results from the dynamic transfer adjustment.

Sim, Alexander; Balman, Mehmet; Williams, Dean; Shoshani, Arie; Natarajan, Vijaya

2010-07-16T23:59:59.000Z

343

Resonant frequency detection and adjustment method for a capacitive transducer with differential transformer bridge  

SciTech Connect (OSTI)

The capacitive transducer with differential transformer bridge is widely used in ultra-sensitive space accelerometers due to their simple structure and high resolution. In this paper, the front-end electronics of an inductive-capacitive resonant bridge transducer is analyzed. The analysis result shows that the performance of this transducer depends upon the case that the AC pumping frequency operates at the resonance point of the inductive-capacitive bridge. The effect of possible mismatch between the AC pumping frequency and the actual resonant frequency is discussed, and the theoretical analysis indicates that the output voltage noise of the front-end electronics will deteriorate by a factor of about 3 due to either a 5% variation of the AC pumping frequency or a 10% variation of the tuning capacitance. A pre-scanning method to determine the actual resonant frequency is proposed followed by the adjustment of the operating frequency or the change of the tuning capacitance in order to maintain expected high resolution level. An experiment to verify the mismatching effect and the adjustment method is provided.

Hu, M.; Bai, Y. Z., E-mail: abai@mail.hust.edu.cn; Zhou, Z. B., E-mail: zhouzb@mail.hust.edu.cn; Li, Z. X.; Luo, J. [MOE Key Laboratory of Fundamental Physical Quantities Measurement, School of Physics, Huazhong University of Science and Technology, Wuhan 430074 (China)] [MOE Key Laboratory of Fundamental Physical Quantities Measurement, School of Physics, Huazhong University of Science and Technology, Wuhan 430074 (China)

2014-05-15T23:59:59.000Z

344

Sample holder with optical features  

DOE Patents [OSTI]

A sample holder for holding a sample to be observed for research purposes, particularly in a transmission electron microscope (TEM), generally includes an external alignment part for directing a light beam in a predetermined beam direction, a sample holder body in optical communication with the external alignment part and a sample support member disposed at a distal end of the sample holder body opposite the external alignment part for holding a sample to be analyzed. The sample holder body defines an internal conduit for the light beam and the sample support member includes a light beam positioner for directing the light beam between the sample holder body and the sample held by the sample support member.

Milas, Mirko; Zhu, Yimei; Rameau, Jonathan David

2013-07-30T23:59:59.000Z

345

1. Prepare 200g of each protein sample in SDS-page loading buffer. 2. Load sample, flanked by prestained molecular weight markers onto a 10% acrylamide gel,  

E-Print Network [OSTI]

. 4. Remove supernatant and wash gel bands 2-3x 15' in 500µL 50:50 acetonitrile:100mM ammonium bicarbonate. 5. Remove supernatant and add 50 µL acetonitrile to completely dry gel band (should turn opaque). Remove acetonitrile and speed vac for ~5 minutes or until slices are completely dry. 6. Resuspend a 20µg

Cravatt, Benjamin

346

Mapping Transmission Risk of Lassa Fever in West Africa: The Importance of Quality Control, Sampling Bias, and Error Weighting  

E-Print Network [OSTI]

–78. 21. Panning M, Emmerich P, Olschlager S, Bojenko S, Koivogui L, et al. (2010) Laboratory diagnosis of Lassa fever, Liberia. Emerg Infect Dis 16: 1041–1043. 22. Fielding AH, Bell JF (1997) A review of methods for the assessment of prediction errors...

Peterson, A. Townsend; Moses, Lina M.; Bausch, Daniel G.

2014-08-08T23:59:59.000Z

347

Sample Environment Plans and Progress  

E-Print Network [OSTI]

Sample Environment Plans and Progress at the SNS & HFIR SNS HFIR User Group Meeting American Conference on Neutron Scattering Ottawa, Canada June 26 ­ 30, 2010 Lou Santodonato Sample Environment Group our sample environment capabilities Feedback SHUG meetings User surveys Sample Environment Steering

Pennycook, Steve

348

Crystallization of polyethylene by modified weighted density approximation(MWDA)  

E-Print Network [OSTI]

In this article, we use the modified weighted density approximation to study the crystallization of polyethylene. We also use a direct correlation function of polyethylene based on RISM theory. The free energy of a polyethylene is calculated using density functional theory. The crystallization and solid and liquid density are calculated and finally compared with the prism simulation and experimental results. That shown the result obtained by MWDA is in better agreement, compared with the experimental result than the prism.

Razeghizadeh, Alireza; Lavafpour, Farhad

2015-01-01T23:59:59.000Z

349

Crystallization of polyethylene by modified weighted density approximation(MWDA)  

E-Print Network [OSTI]

In this article, we use the modified weighted density approximation to study the crystallization of polyethylene. We also use a direct correlation function of polyethylene based on RISM theory. The free energy of a polyethylene is calculated using density functional theory. The crystallization and solid and liquid density are calculated and finally compared with the prism simulation and experimental results. That shown the result obtained by MWDA is in better agreement, compared with the experimental result than the prism.

Alireza Razeghizadeh; Vahdat Rafee; Farhad Lavafpour

2015-02-07T23:59:59.000Z

350

High molecular weight polysaccharide that binds and inhibits virus  

DOE Patents [OSTI]

This invention provides a high molecular weight polysaccharide capable of binding to and inhibiting virus and related pharmaceutical formulations and methods on inhibiting viral infectivity and/or pathogenicity, as well as immunogenic compositions. The invention further methods of inhibiting the growth of cancer cells and of ameliorating a symptom of aging. Additionally, the invention provides methods of detecting and/or quantifying and/or isolating viruses.

Konowalchuk, Thomas W

2014-01-14T23:59:59.000Z

351

GOALS, EXPECTATIONS, AND SATISFACTION IN THE MAINTENANCE OF WEIGHT LOSS  

E-Print Network [OSTI]

, gallbladder disease, respiratory dysfunction, gout, osteoarthritis, and certain cancers (Fontaine, Redden, Wang, Westfall, & Allison, 2003; Must et al., 1999). Obesity is attributable to an estimated 112,000 to 280,000 deaths in the United States each year... various interventions, such as very low calorie 3 diets and pharmacotherapy, with behavior modification to accomplish more significant weight losses (Brownell, 1982; Brownell & Wadden, 1986; 1992). Thus, the philosophy of obesity treatment...

Chang, Olivia L.

2009-08-19T23:59:59.000Z

352

Use of Implanted Markers and Interportal Adjustment With Real-Time Tracking Radiotherapy System to Reduce Intrafraction Prostate Motion  

SciTech Connect (OSTI)

Purpose: Interportal adjustment was applied to patients with prostate cancer using three fiducial markers and two sets of fluoroscopy in a real-time tumor-tracking radiotherapy (RTRT) system. The incidence of table position adjustment required to keep intrafractional uncertainty within 2.0 mm was investigated in this study. Methods and Materials: The coordinates of the center of gravity of the three fiducial markers were measured at the start of every portal irradiation in intensity-modulated radiotherapy (IMRT) with seven ports. The table position was adjusted to the planned position if the discrepancy was larger than 2.0 mm in the anterior-posterior (AP), cranial-caudal (CC), or left-right (LR) directions. In total, we analyzed 4,541 observations in 20 patients who received 70 Gy in 30 fractions (7.6 times a day on average). Results: The incidence of table position adjustment at 10 minutes from the initial setup of each treatment was 14.2%, 12.3%, and 5.0% of the observations in the AP, CC, and LR directions, respectively. The accumulated incidence of the table position adjustment was significantly higher at 10 minutes than at 2 minutes for AP (p = 0.0033) and CC (p = 0.0110) but not LR (p = 0.4296). An adjustment greater than 5 mm was required at least once in the treatment period in 11 (55%) patients. Conclusions: Interportal adjustment of table position was required in more than 10% of portal irradiations during the 10-minute period after initial setup to maintain treatment accuracy within 2.0 mm.

Shimizu, Shinichi, E-mail: sshimizu-rad@umin.ac.jp [Department of Radiation Medicine, Hokkaido University School of Medicine, Sapporo (Japan); Osaka, Yasuhiro [Department of Radiation Medicine, Hokkaido University School of Medicine, Sapporo (Japan); Shinohara, Nobuo; Sazawa, Ataru [Department of Urology, Hokkaido University School of Medicine, Sapporo (Japan); Nishioka, Kentaro [Department of Radiation Medicine, Hokkaido University School of Medicine, Sapporo (Japan); Suzuki, Ryusuke [Department of Medical Physics, Hokkaido University School of Medicine, Sapporo (Japan); Onimaru, Rikiya; Shirato, Hiroki [Department of Radiation Medicine, Hokkaido University School of Medicine, Sapporo (Japan)

2011-11-15T23:59:59.000Z

353

Studies of transverse momentum dependent parton distributions and Bessel weighting  

DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

In this paper we present a new technique for analysis of transverse momentum dependent parton distribution functions, based on the Bessel weighting formalism. The procedure is applied to studies of the double longitudinal spin asymmetry in semi-inclusive deep inelastic scattering using a new dedicated Monte Carlo generator which includes quark intrinsic transverse momentum within the generalized parton model. Using a fully differential cross section for the process, the effect of four momentum conservation is analyzed using various input models for transverse momentum distributions and fragmentation functions. We observe a few percent systematic offset of the Bessel-weighted asymmetry obtained from Monte Carlo extraction compared to input model calculations, which is due to the limitations imposed by the energy and momentum conservation at the given energy/Q2. We find that the Bessel weighting technique provides a powerful and reliable tool to study the Fourier transform of TMDs with controlled systematics due to experimental acceptances and resolutions with different TMD model inputs.

Aghasyan, M; Avakian, H; De Sanctis, E; Gamberg, L; Mirazita, M; Musch, B; Prokudin, A; Rossi, P

2015-03-01T23:59:59.000Z

354

Buckling in polymer monolayers: Molecular-weight dependence  

SciTech Connect (OSTI)

We present systematic investigations of buckling in Langmuir monolayers of polyvinyl acetate formed at the air-water interface. On compression the polymer monolayers are converted to a continuous membrane with a thickness of {approx}2-3 nm of well-defined periodicity, {lambda}{sub b}. Above a certain surface concentration the membrane undergoes a morphological transition buckling, leading to the formation of striped patterns. The periodicity seems to depend on molecular weight as per the predictions of the gravity-bending buckling formalism of Milner et al. for fluidlike films on water. However anomalously low values of bending rigidity and Young's modulus are obtained using this formalism. Hence we have considered an alternative model of buckling-based solidlike films on viscoelastic substrates. The values of bending rigidity and Young's modulus obtained by this method, although lower than expected, are closer to the bulk values. Remarkably, no buckling is found to occur above a certain molecular weight. We have tried to explain the observed molecular-weight dependence in terms of the variation in isothermal compressive modulus of the monolayers with surface concentration as well as provided possible explanations for the obtained low values of mechanical properties similar to that observed for ultrathin polymer films.

Srivastava, S.; Basu, J.K.; (IIS)

2010-11-12T23:59:59.000Z

355

Stack sampling apparatus  

SciTech Connect (OSTI)

An apparatus for obtaining samples from a structure includes a support member, at least one stabilizing member, and at least one moveable member. The stabilizing member has a first portion coupled to the support member and a second portion configured to engage with the structure to restrict relative movement between the support member and the structure. The stabilizing member is radially expandable from a first configuration where the second portion does not engage with a surface of the structure to a second configuration where the second portion engages with the surface of the structure.

Lind, Randall F; Lloyd, Peter D; Love, Lonnie J; Noakes, Mark W; Pin, Francois G; Richardson, Bradley S; Rowe, John C

2014-09-16T23:59:59.000Z

356

September 2004 Water Sampling  

Office of Legacy Management (LM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment ofDepartment ofofOxford SiteToledoSampling at the Grand Junction, Colorado, Disposal

357

September 2004 Water Sampling  

Office of Legacy Management (LM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment ofDepartment ofofOxford SiteToledoSampling at the Grand Junction, Colorado,

358

September 2004 Water Sampling  

Office of Legacy Management (LM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment ofDepartment ofofOxford SiteToledoSampling at the Grand Junction, Colorado,and

359

September 2004 Water Sampling  

Office of Legacy Management (LM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment ofDepartment ofofOxford SiteToledoSampling at the Grand Junction, Colorado,andOld

360

September 2004 Water Sampling  

Office of Legacy Management (LM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment ofDepartment ofofOxford SiteToledoSampling at the Grand Junction, Colorado,andOld

Note: This page contains sample records for the topic "adjusted sampling weight" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

September 2004 Water Sampling  

Office of Legacy Management (LM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment ofDepartment ofofOxford SiteToledoSampling at the Grand Junction, Colorado,andOldOld

362

September 2004 Water Sampling  

Office of Legacy Management (LM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment ofDepartment ofofOxford SiteToledoSampling at the Grand Junction,

363

September 2004 Water Sampling  

Office of Legacy Management (LM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment ofDepartment ofofOxford SiteToledoSampling at the Grand Junction,Groundwater and

364

Sample Changes and Issues  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines AboutDecemberSteamYear Jan FebThousand Cubic Feet)Year JanC.9.3. Receipts8.160Sample

365

September 2004 Water Sampling  

Office of Legacy Management (LM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment ofDepartment ofof EnergyYou$0.C.Green River, Utah, DisposalRulison,Sampling at

366

September 2004 Water Sampling  

Office of Legacy Management (LM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment ofDepartment ofof EnergyYou$0.C.Green River, Utah, DisposalRulison,Sampling at4

367

September 2004 Water Sampling  

Office of Legacy Management (LM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment ofDepartment ofof EnergyYou$0.C.Green River, Utah, DisposalRulison,Sampling

368

September 2004 Water Sampling  

Office of Legacy Management (LM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment ofDepartment ofof EnergyYou$0.C. 20545 OCT 28Sacandaga SiteSep NovWater Sampling

369

September 2004 Water Sampling  

Office of Legacy Management (LM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment ofDepartment ofof EnergyYou$0.C. 20545 OCT 28Sacandaga SiteSep NovWaterSampling

370

Self-adjustable supplemental support system for a cylindrical container in a housing  

DOE Patents [OSTI]

A self-adjustable supplementary support system for a cylindrical container coaxially disposed in a cylindrical housing by upper flanged supports has a plurality of outwardly extending bracket units on the external surface of the container which coact with inwardly extending resiliently outwardly extending bracket units on the inner wall of the cylindrical housing. The bracket units have flanges which form a concave surface that seats on support bars, attached by links to torsion bars that are secured to ring segments annularly spaced about the inner wall of the cylindrical housing and the bracket units and support bars coact with each other to radially position and support the container in the housing during movement of the two components from a vertical to a horizontal position, and during transportation of the same.

Blaushild, Ronald M. (Wilkinsburg, PA)

1987-01-01T23:59:59.000Z

371

Methods, systems and apparatus for adjusting duty cycle of pulse width modulated (PWM) waveforms  

DOE Patents [OSTI]

Embodiments of the present invention relate to methods, systems and apparatus for controlling operation of a multi-phase machine in a vector controlled motor drive system when the multi-phase machine operates in an overmodulation region. The disclosed embodiments provide a mechanism for adjusting a duty cycle of PWM waveforms so that the correct phase voltage command signals are applied at the angle transitions. This can reduce variations/errors in the phase voltage command signals applied to the multi-phase machine so that phase current may be properly regulated thus reducing current/torque oscillation, which can in turn improve machine efficiency and performance, as well as utilization of the DC voltage source.

Gallegos-Lopez, Gabriel; Kinoshita, Michael H; Ransom, Ray M; Perisic, Milun

2013-05-21T23:59:59.000Z

372

Self-adjustable supplemental support system for a cylindrical container in a housing  

DOE Patents [OSTI]

A self-adjustable supplementary support system for a cylindrical container coaxially disposed in a cylindrical housing by upper flanged supports has a plurality of outwardly extending bracket units on the external surface of the container which coact with inwardly extending resiliently outwardly extending bracket units on the inner wall of the cylindrical housing. The bracket units have flanges which form a concave surface that seats on support bars, attached by links to torsion bars that are secured to ring segments annularly spaced about the inner wall of the cylindrical housing and the bracket units and support bars coact with each other to radially position and support the container in the housing during movement of the two components from a vertical to a horizontal position, and during transportation of the same. 14 figs.

Blaushild, R.M.

1987-01-30T23:59:59.000Z

373

Fluid sampling tool  

DOE Patents [OSTI]

A fluid sampling tool is described for sampling fluid from a container. The tool has a fluid collecting portion which is drilled into the container wall, thereby affixing it to the wall. The tool may have a fluid extracting section which withdraws fluid collected by the fluid collecting section. The fluid collecting section has a fluted shank with an end configured to drill a hole into a container wall. The shank has a threaded portion for tapping the borehole. The shank is threadably engaged to a cylindrical housing having an inner axial passageway sealed at one end by a septum. A flexible member having a cylindrical portion and a bulbous portion is provided. The housing can be slid into an inner axial passageway in the cylindrical portion and sealed to the flexible member. The bulbous portion has an outer lip defining an opening. The housing is clamped into the chuck of a drill, the lip of the bulbous section is pressed against a container wall until the shank touches the wall, and the user operates the drill. Wall shavings (kerf) are confined in a chamber formed in the bulbous section as it folds when the shank advances inside the container. After sufficient advancement of the shank, an o-ring makes a seal with the container wall. 6 figs.

Garcia, A.R.; Johnston, R.G.; Martinez, R.K.

1999-05-25T23:59:59.000Z

374

Small Mammal Sampling in Mortandad and Los Alamos Canyons, 2005  

SciTech Connect (OSTI)

As part of an ongoing ecological field investigation at Los Alamos National Laboratory, a study was conducted that compared measured contaminant concentrations in sediment to population parameters for small mammals in the Mortandad Canyon watershed. Mortandad Canyon and its tributary canyons have received contaminants from multiple solid waste management units and areas of concern since establishment of the Laboratory in the 1940s. The study included three reaches within Effluent and Mortandad canyons (E-1W, M-2W, and M-3) that had a spread in the concentrations of metals and radionuclides and included locations where polychlorinated biphenyls and perchlorate had been detected. A reference location, reach LA-BKG in upper Los Alamos Canyon, was also included in the study for comparison purposes. A small mammal study was initiated to assess whether potential adverse effects were evident in Mortandad Canyon due to the presence of contaminants, designated as contaminants of potential ecological concern, in the terrestrial media. Study sites, including the reference site, were sampled in late July/early August. Species diversity and the mean daily capture rate were the highest for E-1W reach and the lowest for the reference site. Species composition among the three reaches in Mortandad was similar with very little overlap with the reference canyon. Differences in species composition and diversity were most likely due to differences in habitat. Sex ratios, body weights, and reproductive status of small mammals were also evaluated. However, small sample sizes of some species within some sites affected the analysis. Ratios of males to females by species of each site (n = 5) were tested using a Chi-square analysis. No differences were detected. Where there was sufficient sample size, body weights of adult small mammals were compared between sites. No differences in body weights were found. Reproductive status of species appears to be similar across sites. However, sample size prevents a detailed examination of reproduction composition. Because of small sample size of some species and differences that might occur on a seasonal basis, additional sampling would need to be conducted to further evaluate sex ratios, body weights, and reproductive characteristics.

Kathy Bennett, Sherri Sherwood, and Rhonda Robinson

2006-08-15T23:59:59.000Z

375

Precision tool holder with flexure-adjustable, three degrees of freedom for a four-axis lathe  

DOE Patents [OSTI]

A precision tool holder for precisely positioning a single point cutting tool on 4-axis lathe, such that the center of the radius of the tool nose is aligned with the B-axis of the machine tool, so as to facilitate the machining of precision meso-scale components with complex three-dimensional shapes with sub-.mu.m accuracy on a four-axis lathe. The device is designed to fit on a commercial diamond turning machine and can adjust the cutting tool position in three orthogonal directions with sub-micrometer resolution. In particular, the tool holder adjusts the tool position using three flexure-based mechanisms, with two flexure mechanisms adjusting the lateral position of the tool to align the tool with the B-axis, and a third flexure mechanism adjusting the height of the tool. Preferably, the flexures are driven by manual micrometer adjusters. In this manner, this tool holder simplifies the process of setting a tool with sub-.mu.m accuracy, to substantially reduce the time required to set the tool.

Bono, Matthew J. (Pleasanton, CA); Hibbard, Robin L. (Livermore, CA)

2008-03-04T23:59:59.000Z

376

Standard practice for bulk sampling of liquid uranium hexafluoride  

E-Print Network [OSTI]

1.1 This practice covers methods for withdrawing representative samples of liquid uranium hexafluoride (UF6) from bulk quantities of the material. Such samples are used for determining compliance with the applicable commercial specification, for example Specification C787 and Specification C996. 1.2 It is assumed that the bulk liquid UF6 being sampled comprises a single quality and quantity of material. This practice does not address any special additional arrangements that might be required for taking proportional or composite samples, or when the sampled bulk material is being added to UF6 residues already in a container (“heels recycle”). 1.3 The number of samples to be taken, their nominal sample weight, and their disposition shall be agreed upon between the parties. 1.4 The scope of this practice does not include provisions for preventing criticality incidents. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of th...

American Society for Testing and Materials. Philadelphia

2001-01-01T23:59:59.000Z

377

Fluid sampling tool  

DOE Patents [OSTI]

The invention includes a rotatable tool for collecting fluid through the wall of a container. The tool includes a fluid collection section with a cylindrical shank having an end portion for drilling a hole in the container wall when the tool is rotated, and a threaded portion for tapping the hole in the container wall. A passageway in the shank in communication with at least one radial inlet hole in the drilling end and an opening at the end of the shank is adapted to receive fluid from the container. The tool also includes a cylindrical chamber affixed to the end of the shank opposite to the drilling portion thereof for receiving and storing fluid passing through the passageway. The tool also includes a flexible, deformable gasket that provides a fluid-tight chamber to confine kerf generated during the drilling and tapping of the hole. The invention also includes a fluid extractor section for extracting fluid samples from the fluid collecting section.

Johnston, Roger G. (Los Alamos, NM); Garcia, Anthony R. E. (Espanola, NM); Martinez, Ronald K. (Santa Cruz, NM)

2001-09-25T23:59:59.000Z

378

Specified assurance level sampling procedure  

SciTech Connect (OSTI)

In the nuclear industry design specifications for certain quality characteristics require that the final product be inspected by a sampling plan which can demonstrate product conformance to stated assurance levels. The Specified Assurance Level (SAL) Sampling Procedure has been developed to permit the direct selection of attribute sampling plans which can meet commonly used assurance levels. The SAL procedure contains sampling plans which yield the minimum sample size at stated assurance levels. The SAL procedure also provides sampling plans with acceptance numbers ranging from 0 to 10, thus, making available to the user a wide choice of plans all designed to comply with a stated assurance level.

Willner, O.

1980-11-01T23:59:59.000Z

379

A Monte Carlo Investigation of Three Different Estimation Methods in Multilevel Structural Equation Modeling Under Conditions of Data Nonnormality and Varied Sample Sizes  

E-Print Network [OSTI]

various sample sizes and differing estimators (maximum likelihood, generalized least squares, and weighted least squares). The finding revealed that the regression coefficients were estimated with little to no bias among the study design conditions...

Byrd, Jimmy

2010-01-14T23:59:59.000Z

380

Dosimetric effects of weight loss or gain during volumetric modulated arc therapy and intensity-modulated radiation therapy for prostate cancer  

SciTech Connect (OSTI)

Weight loss or gain during the course of radiation therapy for prostate cancer can alter the planned dose to the target volumes and critical organs. Typically, source-to-surface distance (SSD) measurements are documented by therapists on a weekly basis to ensure that patients' exterior surface and isocenter-to-skin surface distances remain stable. The radiation oncology team then determines whether the patient has undergone a physical change sufficient to require a new treatment plan. The effect of weight change (SSD increase or decrease) on intensity-modulated radiation therapy (IMRT) or volumetric modulated arc therapy (VMAT) dosimetry is not well known, and it is unclear when rescanning or replanning is needed. The purpose of this study was to determine the effects of weight change (SSD increase or decrease) on IMRT or VMAT dose delivery in patients with prostate cancer and to determine the SSD change threshold for replanning. Whether IMRT or VMAT provides better dose stability under weight change conditions was also determined. We generated clinical IMRT and VMAT prostate and seminal vesicle treatment plans for varying SSDs for 10 randomly selected patients with prostate cancer. The differences due to SSD change were quantified by a specific dose change for a specified volume of interest. The target mean dose, decreased or increased by 2.9% per 1-cm SSD decrease or increase in IMRT and by 3.6% in VMAT. If the SSD deviation is more than 1 cm, the radiation oncology team should determine whether to continue treatment without modifications, to adjust monitor units, or to resimulate and replan.

Pair, Matthew L. [Department of Radiation Oncology, University of Texas MD Anderson Cancer Center, Houston, TX (United States); Du, Weiliang [Department of Radiation Physics, University of Texas MD Anderson Cancer Center, Houston, TX (United States); Rojas, Hector D.; Kanke, James E.; McGuire, Sean E.; Lee, Andrew K.; Kuban, Deborah A. [Department of Radiation Oncology, University of Texas MD Anderson Cancer Center, Houston, TX (United States); Kudchadker, Rajat J., E-mail: rkudchad@mdanderson.org [Department of Radiation Physics, University of Texas MD Anderson Cancer Center, Houston, TX (United States)

2013-10-01T23:59:59.000Z

Note: This page contains sample records for the topic "adjusted sampling weight" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Examining International Students’ Psychosocial Adjustment to Life in the United States  

E-Print Network [OSTI]

?s major conceptual model and hypothesis. Appendix B2 contains the sample?s demographic profile. Appendix B3 presents psychometric properties (i.e., reliability and validity) of data as measured the instrument utilized in Chapter III. Appendix B4... of research reporting these predictors. He pointed out limitations such as a) the underdeveloped concepts and theories utilized in the studies; b) the lack of longitudinal designs; and c) the absence of baseline data or adequate control groups (Church, 1982...

Zhang, Jing

2011-08-08T23:59:59.000Z

382

Spin-weighted Green's functions in a conical space  

E-Print Network [OSTI]

We give an analysis of the spin-weighted Green's functions well-defined in a conical space. We apply these results in the case of a straight cosmic string and in the Rindler space in order to determine generally the Euclidean Green's functions for the massless spin 1/2 field and for the electromagnetic field. We give also the corresponding Green's functions at zero temperature. However, except for the scalar field, it seems that these Euclidean Green's functions do not correspond to the thermal Feynman Green's functions.

B. Linet

1996-11-04T23:59:59.000Z

383

Multi-point functions of weighted cubic maps  

E-Print Network [OSTI]

We study the geodesic two- and three-point functions of random weighted cubic maps, which are obtained by assigning random edge lengths to random cubic planar maps. Explicit expressions are obtained by taking limits of recently established bivariate multi-point functions of general planar maps. We give an alternative interpretation of the two-point function in terms of an Eden model exploration process on a random planar triangulation. Finally, the scaling limits of the multi-point functions are studied, showing in particular that the two- and three-point functions of the Brownian map are recovered as the number of faces is taken to infinity.

Jan Ambjorn; Timothy Budd

2014-08-13T23:59:59.000Z

384

Analysis of ISO NE Balancing Requirements: Uncertainty-based Secure Ranges for ISO New England Dynamic Inerchange Adjustments  

SciTech Connect (OSTI)

The document describes detailed uncertainty quantification (UQ) methodology developed by PNNL to estimate secure ranges of potential dynamic intra-hour interchange adjustments in the ISO-NE system and provides description of the dynamic interchange adjustment (DINA) tool developed under the same contract. The overall system ramping up and down capability, spinning reserve requirements, interchange schedules, load variations and uncertainties from various sources that are relevant to the ISO-NE system are incorporated into the methodology and the tool. The DINA tool has been tested by PNNL and ISO-NE staff engineers using ISO-NE data.

Etingov, Pavel V.; Makarov, Yuri V.; Wu, Di; Hou, Zhangshuan; Sun, Yannan; Maslennikov, S.; Luo, X.; Zheng, T.; George, S.; Knowland, T.; Litvinov, E.; Weaver, S.; Sanchez, E.

2013-01-31T23:59:59.000Z

385

Chemical and Radiochemical Analysis of Consolidated Sludge Samples from the K East Basin  

SciTech Connect (OSTI)

Consolidated sludge samples described in this report were collected from the Hanford K East Basin fuel storage pool in March and April 1999. Material for the samples was collected from both the basin floor and fuel canisters within the basin. Analyses persented include weight percent solids determination, uranium analysis by kinetic phosphorescence (KPA), plutonium isotope analysis by alpha energy analysis (AEA), gross beta analysis, gamma energy analysis (GEA), and metals analysis by inductively coupled plasma atomic emission spectroscopy (ICP-AES).

Elmore, Monte R.; Schmidt, Andrew J.; Silvers, Kurt L.; Thornton, Brenda M.; Gano, Susan R.

2000-10-31T23:59:59.000Z

386

Sampling for Bacteria in Wells  

E-Print Network [OSTI]

This publication will instruct you on the proper procedures for collecting a sample from a water well for bacteriological analysis....

Lesikar, Bruce J.

2001-11-15T23:59:59.000Z

387

Sample Residential Program Term Sheet  

Broader source: Energy.gov (indexed) [DOE]

Goal DRAFT U.S. DOE Sample Residential Program Term Sheet - DRAFT Introduction is seeking to develop an energy...

388

Coordinated Vehicle Platoon Control: Weighted and Constrained Consensus and Communication Network Topologies  

E-Print Network [OSTI]

Coordinated Vehicle Platoon Control: Weighted and Constrained Consensus and Communication Network a new method for enhancing highway safety and efficiency by coordinated control of vehicle platoons. One performance. Vehicle deployment is formulated as a weighted and constrained consensus control problem

Zhang, Hongwei

389

Automatic Generation of Initial Weights and Estimation of Hidden Units for Pattern Classifcation Using Neural Networks   

E-Print Network [OSTI]

This study high lights on the subject of weight initialization in back-propagation feed-forward networks. Training data is analyzed and the notion of critical points is introduced for determining the initial weights and ...

Keeni, Kanad; Nakayama, Kenji; Shimodaira, Hiroshi

390

A study of the trophodynamic relationships among zooplankton groups in the Gulf of Mexico utilizing biomass determined by dry weight and ash-free dry weight analyses  

E-Print Network [OSTI]

A STUDY OF THE TROPHODYNAMIC RELATIONSHIPS AMONG ZOOPLANKTON GROUPS IN THE GULF OF MEXICO UTILIZING BIOMASS DETERMINED BY DRY WEIGHT AND ASH-FREE DRY WEIGHT ANALYSES A Thesis by ALAN YAUTAK KWOK Submitted to the Graduate College of Texas A... WEIGHT AND ASH-FREE DRY WEIGHT ANALYSES A Thesis by ALAN YAUTAK KWOK Approved as to style and content by: '7 (Chairman of Committee) )l&z J( ii (Member) ember) (Head of Department) May 1980 ABSTRACT A Study of the Trophodynamic Relat1onships...

Kwok, Alan Yautak

1980-01-01T23:59:59.000Z

391

Comparison of Two Foreign Body Retrieval Devices with Adjustable Loops in a Swine Model  

SciTech Connect (OSTI)

The purpose of the study was to compare two similar foreign body retrieval devices, the Texan{sup TM} (TX) and the Texan LONGhorn{sup TM} (TX-LG), in a swine model. Both devices feature a {<=}30-mm adjustable loop. Capture times and total procedure times for retrieving foreign bodies from the infrarenal aorta, inferior vena cava, and stomach were compared. All attempts with both devices (TX, n = 15; TX-LG, n = 14) were successful. Foreign bodies in the vasculature were captured quickly using both devices (mean {+-} SD, 88 {+-} 106 sec for TX vs 67 {+-} 42 sec for TX-LG) with no significant difference between them. The TX-LG, however, allowed significantly better capture times than the TX in the stomach (p = 0.022), Overall, capture times for the TX-LG were significantly better than for the TX (p = 0.029). There was no significant difference between the total procedure times in any anatomic region. TX-LG performed significantly better than the TX in the stomach and therefore overall. The better torque control and maneuverability of TX-LG resulted in better performance in large anatomic spaces.

Konya, Andras [University of Texas M. D. Anderson Cancer Center, Section of Interventional Radiology, Division of Diagnostic Imaging (United States)], E-mail: akonya@mdanderson.org

2006-12-15T23:59:59.000Z

392

Assessment of net lost revenue adjustment mechanisms for utility DSM programs  

SciTech Connect (OSTI)

Utility shareholders can lose money on demand-side management (DSM) investments between rate cases. Several industry analysts argue that the revenues lost from utility DSM programs are an important financial disincentive to utility DSM investment. A key utility regulatory reform undertaken since 1989 allows utilities to recover the lost revenues incurred through successful operation of DSM programs. Explicitly defined net lost revenue adjustment (NLRA) mechanisms are states` preferred approach to lost revenue recovery from DSM programs. This report examines the experiences states and utilities are having with the NLRA approach. The report has three objectives. First, we determine whether NLRA is a feasible and successful approach to removing the lost-revenue disincentive to utility operation of DSM programs. Second, we identify the conditions linked to successful implementation of NLRA mechanisms in different states and assess whether NLRA has changed utility investment behavior. Third, we suggest improvements to NLRA mechanisms. We first identify states with NLRA mechanisms where utilities are recovering lost revenues from DSM programs. We interview staff at regulatory agencies in all these states and utility staff in four states. These interviews focus on the status of NLRA, implementation issues, DSM measurement issues, and NLRA results. We also analyze regulatory agency orders on NLRA, as well as associated testimony, reports, and utility lost revenue recovery filings. Finally, we use qualitative and quantitative indicators to assess NLRA`s effectiveness. Contrary to the concerns raised by some industry analysts, our results indicate NLRA is a feasible approach to the lost-revenue disincentive.

Baxter, L.W.

1995-01-01T23:59:59.000Z

393

2007 Wholesale Power Rate Adjustment Proceeding (WP-07) : Administrator's Final Record of Decision.  

SciTech Connect (OSTI)

This Record of Decision (ROD) contains the decisions of the Bonneville Power Administration (BPA), based on the record compiled in this rate proceeding, with respect to the adoption of power rates for the three-year rate period commencing October 1, 2006, through September 30, 2009. This ''2007 Wholesale Power Rate Adjustment Proceeding'' is designed to establish replacement rate schedules and General Rate Schedule Provisions (GRSPs) for those that expire on September 30, 2006. This power rate case also establishes the General Transfer Agreement (GTA) Delivery Charge for the period of October 1, 2007, through September 30, 2009. BPA's Power Subscription Strategy and Record of Decision (Subscription Strategy), as well as other Agency processes, provide much of the policy context for this rate case and are described in Section 2. This ROD follows a full evidentiary hearing and briefing, including an Oral Argument before the BPA Administrator. Sections 3 through 18, including any appendices or attachments, present the issues raised by parties in this proceeding, the parties positions, BPA staff positions on the issues, BPA's evaluations of the positions, and the Administrator's decisions. Parties had the opportunity to file briefs on exceptions to the Draft ROD, before issuance of this Final Record of Decision.

United States. Bonneville Power Administration.

2006-07-01T23:59:59.000Z

394

Designing, implementing and monitoring social impact mitigation strategies: Lessons from Forest Industry Structural Adjustment Packages  

SciTech Connect (OSTI)

Social impact mitigation strategies are implemented by the proponents of policies and projects with the intent of reducing the negative, and increasing the positive social impacts of their activities, and facilitating the achievement of policy/project goals. Evaluation of mitigation strategies is critical to improving their future success and cost-effectiveness. This paper evaluates two Forest Industry Structural Adjustment Packages (FISAP) implemented in Australia in the 1990s to 2000s as part of broader policy changes that reduced access to timber from publicly owned native forests. It assesses the effectiveness of the structure, design, implementation and monitoring of the FISAPs, and highlights the interactions between these four elements and their influence on social impacts. The two FISAPs were found to be effective in terms of reducing negative impacts, encouraging positive impacts and contributing towards policy goals, although they did not mitigate negative impacts in all cases, and sometimes interacted with external factors and additional policy changes to contribute to significant short and long term negative impacts. -- Highlights: ? Mitigation strategies aim to reduce negative and enhance positive social impacts ? Mitigation strategy design, implementation, and monitoring are critical to success ? Effective mitigation enhanced the capacity of recipients to respond to change ? Mitigation strategies influenced multiple interacting positive and negative impacts ? Success required good communication, transparency, support, resources and timing.

Loxton, Edwina A., E-mail: Edwina.Loxton@anu.edu.au [Fenner School of Environment and Society, The Australian National University, Canberra, 0200 (Australia); Schirmer, Jacki, E-mail: Jacki.Schirmer@canberra.edu.au [Fenner School of Environment and Society, The Australian National University, Canberra, 0200 (Australia) [Fenner School of Environment and Society, The Australian National University, Canberra, 0200 (Australia); Cooperative Research Centre for Forestry, Hobart, 7001 (Australia); Kanowski, Peter, E-mail: P.Kanowski@cgiar.org [Fenner School of Environment and Society, The Australian National University, Canberra, 0200 (Australia) [Fenner School of Environment and Society, The Australian National University, Canberra, 0200 (Australia); Cooperative Research Centre for Forestry, Hobart, 7001 (Australia)

2013-09-15T23:59:59.000Z

395

Factors affecting birth weight, gestation length and dystocia in Charolais cattle  

E-Print Network [OSTI]

SIRE . . 20 21 22 ANALYSIS OF VARIANCE OF BIRTH WEIGHT AS INFLUENCED BY PERCENTACiE OF FRENCH CHAROLAIS WITHIN PERCENTAGE OF CHAROLAIS. . . . . . . . . . . . . . . . . . . . Z3 ANALYSIS OF VARIANCE OF BIRTH WEIGHT AS INFLUENCED BY PERCENTAGE... herd must efficiently produce the maximum total pounds of a saleable product, i. e. calves. To increase his production, he has culled and selected for heav1er weaning weights and heavier yearling weights. In h1s efforts to increase the size...

Schroeder, Charles

2012-06-07T23:59:59.000Z

396

Electronic copy available at: http://ssrn.com/abstract=2065816 Ultimate Ownership Structure and Bank Regulatory Capital Adjustment  

E-Print Network [OSTI]

their capital structure (debt/equity), firms in general and banks more specifically take control dilution costs into consideration, beyond the asymmetric information and transaction costs considered in prior research on capital and Bank Regulatory Capital Adjustment: Evidence from European Commercial Banks Laetitia Lepetita , Amine

Boyer, Edmond

397

Instructions and Data Form for Local Authority Having Jurisdiction to Submit Adjustments to Default Outdoor Lighting Zones  

E-Print Network [OSTI]

Outdoor Lighting Zones Adjustments to Default Outdoor Lighting Zones A local Authority Having Jurisdiction (AHJ) may officially adopt changes to the default Outdoor Lighting Zone designation of an area the proposed change. For example, the AHJ may determine areas where Outdoor Lighting Zone 4 is applicable

398

Comparing Two Types of Magnetically- Coupled Adjustable Speed Drives with Variable Frequency Drives in Pump and Fan Applications  

E-Print Network [OSTI]

This paper presents the results from laboratory tests on MagnaDrive Corporations fixed-magnet magnetically-coupled adjustable speed drive (MC-ASD) and Coyote Electronics electromagnetic MC-ASD as compared to a typical variable frequency drive (VFD...

Anderson, K. J.; Chvala, W. D.

399

The influence of phosphorus nutrition and water stress on the osmotic adjustment and growth of loblolly pine  

E-Print Network [OSTI]

LITERATURE REVIEW Water Stress Osmotic Adjustment Phosphorus MATERIALS AND METHODS Experimental Design Sowing Preparation Sowing and Seedling Cultivation Treatments . . . . . . . ~ Measurements . . . . . . - ~ ~ ~ Statistical Analysis RESULTS... three days. Fertilizer was applied every other time the seedlings received water. Treatments were initiated to provide three levels of phos- phorus nutrition (10, 100, 200 ppm) and three levels of water stress. Water stress was imposed...

Wilson, Alan Byron

1985-01-01T23:59:59.000Z

400

On the postglacial isostatic adjustment of the British Isles and the shallow viscoelastic structure of the Earth  

E-Print Network [OSTI]

of the Earth W. R. Peltier,1 I. Shennan,2 R. Drummond1 and B. Horton2 1 Department of Physics, University viscoelastic theory of the glacial isostatic adjustment (GIA) process, most recently reviewed in Peltier (1998a on the inverse problem for mantle viscosity (see the papers by Peltier 1998b and Wieczerkowski et al. 1999

Peltier, W. Richard

Note: This page contains sample records for the topic "adjusted sampling weight" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

THE SELF-ADJUSTING CURRENT-FED PUSH-PULL PARALLEL RESONANT INVERTER AS A HIGH FREQUENCY AC BUS DRIVER  

E-Print Network [OSTI]

. The power inverter is based on a Current-Fed Push-Pull Parallel-Resonant Inverter (CFPPRI), which includes power eliminates some of the conversion units, it poses new design challenges [1]: (a) ElectromagneticTHE SELF-ADJUSTING CURRENT-FED PUSH-PULL PARALLEL RESONANT INVERTER AS A HIGH FREQUENCY AC BUS

402

ORIGINAL PAPER Tomato fruit weight 11.3 maps close to fasciated on the bottom  

E-Print Network [OSTI]

ORIGINAL PAPER Tomato fruit weight 11.3 maps close to fasciated on the bottom of chromosome 11 online: 4 May 2011 Ã? Springer-Verlag 2011 Abstract Fruit weight is an important character in many crops. In tomato (Solanum lycopersicum), fruit weight is controlled by many loci, some of which have a major effect

van der Knaap, Esther

403

TDA Progress Report 42-122 August 15, 1995 Weight Distributions for Turbo Codes Using  

E-Print Network [OSTI]

TDA Progress Report 42-122 August 15, 1995 Weight Distributions for Turbo Codes Using Random takes a preliminary look at the weight distributions achievable for turbo codes using random, nonrandom to being foiled by higher-weight inputs. I. Introduction Turbo codes are constructed by applying two

Li, Tiffany Jing

404

Method for Weight Control Engineering Management to Evaluate Single Engine Aircraft Weighing Activities  

E-Print Network [OSTI]

Nose Gear Weight Plot................................................................................................. 51 Figure 31 Measurement of Distance ?A? Plot............................................................................... 51... measurement of everything from the thickness of a coat of paint to how much an aircraft weighs and where its CG is located. 1 The problem of determining an aircraft?s weight and CG is the focus of this investigation. It is a primary concern for Weight...

Brown, Patrick M.

2007-05-18T23:59:59.000Z

405

Approximate Weighted Matching On Emerging Manycore and Multithreaded Architectures  

SciTech Connect (OSTI)

Graph matching is a prototypical combinatorial problem with many applications in computer science and scientific computing, but algorithms for computing optimal matchings are challenging to parallelize. Approximate matching algorithms provide an alternate route for parallelization, and in many contexts compute near-optimal matchings for large-scale graphs. We present sharedmemory parallel implementations for computing half-approximate weighted matching on state-of-the-art multicore (Intel Nehalem and AMD Magny-Cours), manycore (Nvidia Tesla and Nvidia Fermi) and massively multithreaded (Cray XMT) platforms. We provide two implementations: the first implementation uses shared work queues, and is suited to all these platforms; the second implementation is based on dataflow principles, and exploits the architectural features of the Cray XMT. Using a carefully chosen dataset that exhibits characteristics from a wide range of real-world applications, we show scalable performance across different platforms. In particular, for one instance of the input, an R-MAT graph (RMAT-G), we show speedups of: about 32 on 48 cores of an AMD Magny-Cours; 7 on 8 cores of Intel Nehalem; 3 on Nvidia Tesla and 10 on Nvidia Fermi relative to one core of Intel Nehalem; and 60 on 128 processors of Cray XMT. We demonstrate good weak and strong scaling for graphs with up to a billion edges using up to 12, 800 threads. Given the breadth of this work, we focus on simplicity and portability of software rather than excessive fine-tuning for each platform. To the best of our knowledge, this is the first such large-scale study of the half-approximate weighted matching problem on shared-memory platforms. Driven by the critical enabling role of combinatorial algorithms such as matching in scientific computing and the emergence of informatics applications, there is a growing demand to support irregular computations on current and future computing platforms. In this context, we evaluate the capability of emerging multithreaded platforms to tolerate latency induced by irregular memory access patterns, and to support fine-grained parallelism via light-weight synchronization mechanisms. By contrasting the architectural features of these platforms against the Cray XMT, which is specifically designed to support irregular memory-intensive applications, we delineate the impact of these choices on performance.

Halappanavar, Mahantesh; Feo, John T.; Villa, Oreste; Tumeo, Antonino; Pothen, Alex

2012-11-30T23:59:59.000Z

406

Post-Award Deliverables Sample (Second Part of Sample Deliverables...  

Broader source: Energy.gov (indexed) [DOE]

Task Orders (IDIQ Attachment. J-4) Sample Statement of Work - Standard Service Offerings for Contractor-Identified Project ESPC TASK ORDER REQUEST FOR PROPOSAL (TO RFP) TEMPLATE...

407

Light weight underground pipe or cable installing device  

SciTech Connect (OSTI)

This invention pertains to a light weight underground pipe or cable installing device adapted for use in a narrow and deep operating trench. More particularly this underground pipe installing device employs a pair of laterally movable gates positioned adjacent the bottom of the operating trench where the earth is more solid to securely clamp the device in the operating trench to enable it to withstand the forces exerted as the actuating rod is forced through the earth from the so-called operating trench to the target trench. To accommodate the laterally movable gates positioned adjacent the bottom of the narrow pipe installing device, a pair of top operated double-acting rod clamping jaws, operated by a hydraulic cylinder positioned above the actuating rod are employed.

Schosek, W. O.

1985-01-08T23:59:59.000Z

408

Apparatus and method of determining molecular weight of large molecules  

DOE Patents [OSTI]

A mass spectrometer determines the mass of multiply charged high molecular weight molecules. This spectrometer utilizes an ion detector which is capable of simultaneously measuring the charge z and transit time of a single ion as it passes through the detector. From this transit time, the velocity of the single ion may then be derived, thus providing the mass-to-charge ratio m/z for a single ion which has been accelerated through a known potential. Given z and m/z, the mass m of the single ion can then be calculated. Electrospray ions with masses in excess of 1 MDa and charge numbers greater than 425 e.sup.- are readily detected. The on-axis single ion detection configuration enables a duty cycle of nearly 100% and extends the practical application of electrospray mass spectrometry to the analysis of very large molecules with relatively inexpensive instrumentation.

Fuerstenau, Stephen (Montrose, CA); Benner, W. Henry (Danville, CA); Madden, Norman (Livermore, CA); Searles, William (Fremont, CA)

1998-01-01T23:59:59.000Z

409

Apparatus and method of determining molecular weight of large molecules  

DOE Patents [OSTI]

A mass spectrometer determines the mass of multiply charged high molecular weight molecules. This spectrometer utilizes an ion detector which is capable of simultaneously measuring the charge z and transit time of a single ion as it passes through the detector. From this transit time, the velocity of the single ion may then be derived, thus providing the mass-to-charge ratio m/z for a single ion which has been accelerated through a known potential. Given z and m/z, the mass m of the single ion can then be calculated. Electrospray ions with masses in excess of 1 MDa and charge numbers greater than 425 e{sup {minus}} are readily detected. The on-axis single ion detection configuration enables a duty cycle of nearly 100% and extends the practical application of electrospray mass spectrometry to the analysis of very large molecules with relatively inexpensive instrumentation. 14 figs.

Fuerstenau, S.; Benner, W.H.; Madden, N.M.; Searles, W.

1998-06-23T23:59:59.000Z

410

Weighted Soft Decision for Cooperative Sensing in Cognitive Radio Networks  

E-Print Network [OSTI]

Enhancing the current services or deploying new services operating in RF spectrum requires more licensed spectrum which may not be provided by the regulatory bodies because of spectrum scarcity. On the contrary, recent studies suggest that many portions of the licensed spectrum remains unused or underused for significant period of time raising the issue of spectrum access without license in an opportunistic manner. Among all the spectrum accessing techniques, sensing based methods are considered optimal for their simplicity and cost effectiveness. In this paper, we introduce a new cooperative spectrum sensing technique which considers the spatial variation of secondary (unlicensed) users and each user's contribution is weighted by a factor that depends on received power and path loss. Compared to existing techniques, the proposed one increases the sensing ability and spectrum utilization, and offers greater robustness to noise uncertainty. Moreover, this cooperative technique uses very simple energy detector ...

Shahid, Mohammad Iqbal Bin

2010-01-01T23:59:59.000Z

411

Adjustment patterns to commodity terms of trade shocks: the role of exchange rate and international reserves policies  

E-Print Network [OSTI]

in our sample: Argentina, Bolivia, Brazil, Chile, Colombia,In our sample, only Bolivia displays a negative andcurrency. In effect, only Bolivia and Nicaragua show

Aizenman, Joshua; Edwards, Sebastian; Riera-Crichton, Daniel

2012-01-01T23:59:59.000Z

412

Relationship of the weaning weight of beef calves to the size of their dams  

E-Print Network [OSTI]

of MASTER OF SCIENCE August 1964 Major Subject; Animal Breeding REIATIONSHIP OF THE WEANING WEIGHT OF BEEF CALVES TO THE SIZE OF THEIR DAMS A Thesis By JAMES EDWARD TANNER Approved as to style and content by: ';/ . (Chatrman o Committee) (Head... of age of dam within weight groups of Angus cows 20 Analyses of covariance of 200-day weight (lb. ? of Angus calves. Estimated least-squares constants for 200-day weight (lb. ) of Angus calves Least-squares means of 200-day weight (lb. ) of Angus...

Tanner, James Edward

1964-01-01T23:59:59.000Z

413

Acceptance sampling using judgmental and randomly selected samples  

SciTech Connect (OSTI)

We present a Bayesian model for acceptance sampling where the population consists of two groups, each with different levels of risk of containing unacceptable items. Expert opinion, or judgment, may be required to distinguish between the high and low-risk groups. Hence, high-risk items are likely to be identifed (and sampled) using expert judgment, while the remaining low-risk items are sampled randomly. We focus on the situation where all observed samples must be acceptable. Consequently, the objective of the statistical inference is to quantify the probability that a large percentage of the unsampled items in the population are also acceptable. We demonstrate that traditional (frequentist) acceptance sampling and simpler Bayesian formulations of the problem are essentially special cases of the proposed model. We explore the properties of the model in detail, and discuss the conditions necessary to ensure that required samples sizes are non-decreasing function of the population size. The method is applicable to a variety of acceptance sampling problems, and, in particular, to environmental sampling where the objective is to demonstrate the safety of reoccupying a remediated facility that has been contaminated with a lethal agent.

Sego, Landon H.; Shulman, Stanley A.; Anderson, Kevin K.; Wilson, John E.; Pulsipher, Brent A.; Sieber, W. Karl

2010-09-01T23:59:59.000Z

414

Adaptive Sampling for Environmental Robotics  

E-Print Network [OSTI]

186, 2003. S. Thrun, “Robotics Mapping: A survey”, Exploringtechnique to environmental robotics applications includingSampling for Environmental Robotics Mohammad Rahimi †,‡‡ ,

Mohammad Rahimi; Richard Pon; Deborah Estrin; William J. Kaiser; Mani Srivastava; Gaurav S. Sukhatme

2003-01-01T23:59:59.000Z

415

Sample Residential Program Term Sheet  

Broader source: Energy.gov [DOE]

A sample for defining and elaborating on the specifics of a clean energy loan program. Author: U.S. Department of Energy

416

Homeowner Soil Sample Information Form  

E-Print Network [OSTI]

Homeowners should submit this form with their soil samples when requesting a soil test from the Texas A&M Soil Testing Laboratory....

Provin, Tony

2007-04-11T23:59:59.000Z

417

ISOLOK VALVE ACCEPTANCE TESTING FOR DWPF SME SAMPLING PROCESS  

SciTech Connect (OSTI)

Evaluation of the Defense Waste Processing Facility (DWPF) Chemical Process Cell (CPC) cycle time identified several opportunities to improve the CPC processing time. Of the opportunities, a focus area related to optimizing the equipment and efficiency of the sample turnaround time for DWPF Analytical Laboratory was identified. The Mechanical Systems & Custom Equipment Development (MS&CED) Section of the Savannah River National Laboratory (SRNL) evaluated the possibility of using an Isolok{reg_sign} sampling valve as an alternative to the Hydragard{reg_sign} valve for taking process samples. Previous viability testing was conducted with favorable results using the Isolok sampler and reported in SRNL-STI-2010-00749 (1). This task has the potential to improve operability, reduce maintenance time and decrease CPC cycle time. This report summarizes the results from acceptance testing which was requested in Task Technical Request (TTR) HLW-DWPF-TTR-2010-0036 (2) and which was conducted as outlined in Task Technical and Quality Assurance Plan (TTQAP) SRNL-RP-2011-00145 (3). The Isolok to be tested is the same model which was tested, qualified, and installed in the Sludge Receipt Adjustment Tank (SRAT) sample system. RW-0333P QA requirements apply to this task. This task was to qualify the Isolok sampler for use in the DWPF Slurry Mix Evaporator (SME) sampling process. The Hydragard, which is the current baseline sampling method, was used for comparison to the Isolok sampling data. The Isolok sampler is an air powered grab sampler used to 'pull' a sample volume from a process line. The operation of the sampler is shown in Figure 1. The image on the left shows the Isolok's spool extended into the process line and the image on the right shows the sampler retracted and then dispensing the liquid into the sampling container. To determine tank homogeneity, a Coliwasa sampler was used to grab samples at a high and low location within the mixing tank. Data from the two locations were compared to determine if the contents of the tank were well mixed. The Coliwasa sampler is a tube with a stopper at the bottom and is designed to obtain grab samples from specific locations within the drum contents. A position paper (4) was issued to address the prototypic flow loop issues and simulant selections. A statistically designed plan (5) was issued to address the total number of samples each sampler needed to pull, to provide the random order in which samples were pulled and to group samples for elemental analysis. The TTR required that the Isolok sampler perform as well as the Hydragard sampler during these tests to ensure the acceptability of the Isolok sampler for use in the DWPF sampling cells. Procedure No.L9.4-5015 was used to document the sample parameters and process steps. Completed procedures are located in R&D Engineering job folder 23269.

Edwards, T.; Hera, K.; Coleman, C.; Jones, M.; Wiedenman, B.

2011-12-05T23:59:59.000Z

418

Defining And Characterizing Sample Representativeness For DWPF Melter Feed Samples  

SciTech Connect (OSTI)

Representative sampling is important throughout the Defense Waste Processing Facility (DWPF) process, and the demonstrated success of the DWPF process to achieve glass product quality over the past two decades is a direct result of the quality of information obtained from the process. The objective of this report was to present sampling methods that the Savannah River Site (SRS) used to qualify waste being dispositioned at the DWPF. The goal was to emphasize the methodology, not a list of outcomes from those studies. This methodology includes proven methods for taking representative samples, the use of controlled analytical methods, and data interpretation and reporting that considers the uncertainty of all error sources. Numerous sampling studies were conducted during the development of the DWPF process and still continue to be performed in order to evaluate options for process improvement. Study designs were based on use of statistical tools applicable to the determination of uncertainties associated with the data needs. Successful designs are apt to be repeated, so this report chose only to include prototypic case studies that typify the characteristics of frequently used designs. Case studies have been presented for studying in-tank homogeneity, evaluating the suitability of sampler systems, determining factors that affect mixing and sampling, comparing the final waste glass product chemical composition and durability to that of the glass pour stream sample and other samples from process vessels, and assessing the uniformity of the chemical composition in the waste glass product. Many of these studies efficiently addressed more than one of these areas of concern associated with demonstrating sample representativeness and provide examples of statistical tools in use for DWPF. The time when many of these designs were implemented was in an age when the sampling ideas of Pierre Gy were not as widespread as they are today. Nonetheless, the engineers and statisticians used carefully thought out designs that systematically and economically provided plans for data collection from the DWPF process. Key shared features of the sampling designs used at DWPF and the Gy sampling methodology were the specification of a standard for sample representativeness, an investigation that produced data from the process to study the sampling function, and a decision framework used to assess whether the specification was met based on the data. Without going into detail with regard to the seven errors identified by Pierre Gy, as excellent summaries are readily available such as Pitard [1989] and Smith [2001], SRS engineers understood, for example, that samplers can be biased (Gy?s extraction error), and developed plans to mitigate those biases. Experiments that compared installed samplers with more representative samples obtained directly from the tank may not have resulted in systematically partitioning sampling errors into the now well-known error categories of Gy, but did provide overall information on the suitability of sampling systems. Most of the designs in this report are related to the DWPF vessels, not the large SRS Tank Farm tanks. Samples from the DWPF Slurry Mix Evaporator (SME), which contains the feed to the DWPF melter, are characterized using standardized analytical methods with known uncertainty. The analytical error is combined with the established error from sampling and processing in DWPF to determine the melter feed composition. This composition is used with the known uncertainty of the models in the Product Composition Control System (PCCS) to ensure that the wasteform that is produced is comfortably within the acceptable processing and product performance region. Having the advantage of many years of processing that meets the waste glass product acceptance criteria, the DWPF process has provided a considerable amount of data about itself in addition to the data from many special studies. Demonstrating representative sampling directly from the large Tank Farm tanks is a difficult, if not unsolvable enterprise due to li

Shine, E. P.; Poirier, M. R.

2013-10-29T23:59:59.000Z

419

Friction and Wear Behavior of Ultrahigh Molecular Weight Polyethylene as a Function of Crystallinity in the Presence of the  

E-Print Network [OSTI]

Friction and Wear Behavior of Ultrahigh Molecular Weight Polyethylene as a Function: In this study, the friction and wear behavior of ultrahigh molecular weight polyethylene (UHMWPE) were evaluated Words: ultrahigh molecular weight polyethylene (UHMWPE), crystallinity, friction, wear, phospholipid

Lin, Zhiqun

420

Eric Gobe, "Deceptive Liberal Reforms: Institutional Adjustments and the Dynamics of Authoritarianism in Tunisia (19972005)", in Kienle Eberhard (ed.), Democracy Building & Democracy Erosion. Political  

E-Print Network [OSTI]

1 Eric Gobe, "Deceptive Liberal Reforms: Institutional Adjustments and the Dynamics Reforms: Institutional Adjustments and the Dynamics of Authoritarianism in Tunisia (1997­2005) Eric Gobe of political forces. In Ben Ali's Tunisia, the institutional reforms introduced in the 1990s

Boyer, Edmond

Note: This page contains sample records for the topic "adjusted sampling weight" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Fair Labor Standards Act and Service Contract Act-Price Adjustment UT-B Contracts Div (Multiple Year and Option Contracts)  

E-Print Network [OSTI]

Fair Labor Standards Act and Service Contract Act-Price Adjustment UT-B Contracts Div (Multiple STANDARDS ACT AND SERVICE CONTRACT ACT - PRICE ADJUSTMENT (MULTIPLE YEAR AND OPTION CONTRACTS) (Sept 2009 is provided under this clause. (c) The wage determination, issued under the Service Contract Act of 1965

Pennycook, Steve

422

Database Sampling with Functional Dependencies  

E-Print Network [OSTI]

Database Sampling with Functional Dependencies Jes´us Bisbal, Jane Grimson Department of Computer there is a need to prototype the database which the applications will use when in operation. A prototype database can be built by sampling data from an existing database. Including relevant semantic information when

Riera, Jesús Bisbal

423

Sample push-out fixture  

DOE Patents [OSTI]

This invention generally relates to the remote removal of pelletized samples from cylindrical containment capsules. V-blocks are used to receive the samples and provide guidance to push out rods. Stainless steel liners fit into the v-channels on the v-blocks which permits them to be remotely removed and replaced or cleaned to prevent cross contamination between capsules and samples. A capsule holder securely holds the capsule while allowing manual up/down and in/out movement to align each sample hole with the v-blocks. Both end sections contain identical v-blocks; one that guides the drive out screw and rods or manual push out rods and the other to receive the samples as they are driven out of the capsule.

Biernat, John L. (Scotia, NY)

2002-11-05T23:59:59.000Z

424

Weight and volume relationships in fluid dairy products  

E-Print Network [OSTI]

~ ~ ~ Estimates of the Solids-not the Watson Lactometex in Commexcial Dairy -fat Content Using ~ e ~ 100 CONCLUSIONS 104 SUMMARY ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ o e ~ ~ LITERATURE CITED 108 110 LEAST 0P TABLES Table Change in mean specific gxavity per lop... to milk fat, solids-not-fat, and total solids content . . . . . , , , . . . . . , . 43 Multiple regression equations xelating specific gravity at given temperatuxes by the Babcock bottle method to the fat and solids-not-fat percentages in 50 samples...

Wilson, Robert Ray

2012-06-07T23:59:59.000Z

425

Characterizing system dynamics with a weighted and directed network constructed from time series data  

SciTech Connect (OSTI)

In this work, we propose a novel method to transform a time series into a weighted and directed network. For a given time series, we first generate a set of segments via a sliding window, and then use a doubly symbolic scheme to characterize every windowed segment by combining absolute amplitude information with an ordinal pattern characterization. Based on this construction, a network can be directly constructed from the given time series: segments corresponding to different symbol-pairs are mapped to network nodes and the temporal succession between nodes is represented by directed links. With this conversion, dynamics underlying the time series has been encoded into the network structure. We illustrate the potential of our networks with a well-studied dynamical model as a benchmark example. Results show that network measures for characterizing global properties can detect the dynamical transitions in the underlying system. Moreover, we employ a random walk algorithm to sample loops in our networks, and find that time series with different dynamics exhibits distinct cycle structure. That is, the relative prevalence of loops with different lengths can be used to identify the underlying dynamics.

Sun, Xiaoran, E-mail: sxr0806@gmail.com [Shenzhen Graduate School, Harbin Institute of Technology, Shenzhen 518055 (China) [Shenzhen Graduate School, Harbin Institute of Technology, Shenzhen 518055 (China); School of Mathematics and Statistics, The University of Western Australia, Crawley WA 6009 (Australia); Small, Michael, E-mail: michael.small@uwa.edu.au [School of Mathematics and Statistics, The University of Western Australia, Crawley WA 6009 (Australia)] [School of Mathematics and Statistics, The University of Western Australia, Crawley WA 6009 (Australia); Zhao, Yi [Shenzhen Graduate School, Harbin Institute of Technology, Shenzhen 518055 (China)] [Shenzhen Graduate School, Harbin Institute of Technology, Shenzhen 518055 (China); Xue, Xiaoping [Department of Mathematics, Harbin Institute of Technology, Harbin 150025 (China)] [Department of Mathematics, Harbin Institute of Technology, Harbin 150025 (China)

2014-06-15T23:59:59.000Z

426

Sample rotating turntable kit for infrared spectrometers  

DOE Patents [OSTI]

An infrared spectrometer sample rotating turntable kit has a rotatable sample cup containing the sample. The infrared spectrometer has an infrared spectrometer probe for analyzing the sample and the rotatable sample cup is adapted to receive the infrared spectrometer probe. A reflectance standard is located in the rotatable sample cup. A sleeve is positioned proximate the sample cup and adapted to receive the probe. A rotator rotates the rotatable sample cup. A battery is connected to the rotator.

Eckels, Joel Del (Livermore, CA); Klunder, Gregory L. (Oakland, CA)

2008-03-04T23:59:59.000Z

427

Genotoxicity of soil and sediment samples as measured by the Salmonella mutagenicity and E. coli Prophage-induction assays  

E-Print Network [OSTI]

and Extracts Obtained from Industrial Shipping Facility QSF 1) . Dose Resonse of S. typhimurium strain TA98 to Sample Extracts from ISF 1, Total TA98 his+ Revertants . . . . . . . . . . 37 Specific activity of CH2C12 and CHsOH Fractions Extracted from... Sediment samples from Industrial Shipping Facility QSF I) . 38 Weighted Activity of CH2C12 and CHsOH Fractions Extracted from Sediment Samples from Industrial Shipping Facility QSF1) . 38 Dose Response of Prophage-induction to Samples Obtained from...

Krause, Erica Shannon

2012-06-07T23:59:59.000Z

428

Estimation of body composition in channel catfish utilizing relative weight and total body electrical conductivity  

E-Print Network [OSTI]

) of channel catfish based on TOBEC, total length (L), and weight (W) measurements (Ps 0. 0001). . 31 7 Individual fish codes, body measurements, and observed (0) and predicted (P) ash and lean body mass components for channel catfish used to evaluate... on measurements such as weight, length, or body condition factors have been previously employed to estimate body composition (Brown and Murphy, 1991). In bluegill (Lepomis macrochirus), components such as lipid, protein, ash, and dry weight have been...

Jaramillo, Francisco

1993-01-01T23:59:59.000Z

429

Sample Business Plan Framework 3  

Broader source: Energy.gov [DOE]

U.S. Department of Energy Better Buildings Neighborhood Program: Sample Business Plan Framework 1: A program seeking to continue operations in the post-grant period as a not-for-profit (NGO) entity.

430

Sample Business Plan Framework 2  

Broader source: Energy.gov [DOE]

U.S. Department of Energy Better Buildings Neighborhood Program: Sample Business Plan Framework 1: A program seeking to continue operations in the post-grant period as a not-for-profit (NGO) entity.

431

Sample Business Plan Framework 4  

Broader source: Energy.gov [DOE]

U.S. Department of Energy Better Buildings Neighborhood Program: Sample Business Plan Framework 1: A program seeking to continue operations in the post-grant period as a not-for-profit (NGO) entity.

432

Sample Business Plan Framework 1  

Broader source: Energy.gov [DOE]

U.S. Department of Energy Better Buildings Neighborhood Program: Sample Business Plan Framework 1: A program seeking to continue operations in the post-grant period as a not-for-profit (NGO) entity.

433

Sampling based on local bandwidth  

E-Print Network [OSTI]

The sampling of continuous-time signals based on local bandwidth is considered in this thesis. In an intuitive sense, local bandwidth refers to the rate at which a signal varies locally. One would expect that signals should ...

Wei, Dennis

2007-01-01T23:59:59.000Z

434

Depth-discrete sampling port  

DOE Patents [OSTI]

A sampling port is provided which has threaded ends for incorporating the port into a length of subsurface pipe. The port defines an internal receptacle which is in communication with subsurface fluids through a series of fine filtering slits. The receptacle is in further communication through a bore with a fitting carrying a length of tubing there which samples are transported to the surface. Each port further defines an additional bore through which tubing, cables, or similar components of adjacent ports may pass.

Pemberton, Bradley E. (Aiken, SC); May, Christopher P. (Columbia, MD); Rossabi, Joseph (Aiken, SC); Riha, Brian D. (Augusta, GA); Nichols, Ralph L. (North Augusta, SC)

1999-01-01T23:59:59.000Z

435

Depth-discrete sampling port  

DOE Patents [OSTI]

A sampling port is provided which has threaded ends for incorporating the port into a length of subsurface pipe. The port defines an internal receptacle which is in communication with subsurface fluids through a series of fine filtering slits. The receptacle is in further communication through a bore with a fitting carrying a length of tubing there which samples are transported to the surface. Each port further defines an additional bore through which tubing, cables, or similar components of adjacent ports may pass.

Pemberton, Bradley E. (Aiken, SC); May, Christopher P. (Columbia, MD); Rossabi, Joseph (Aiken, SC); Riha, Brian D. (Augusta, GA); Nichols, Ralph L. (North Augusta, SC)

1998-07-07T23:59:59.000Z

436

Characterization and analysis of the molecular weight of lignin for biorefining studies  

SciTech Connect (OSTI)

The molecular weight of lignin is a fundamental property that infl uences the recalcitrance of biomass and the valorization of lignin. The determination of the molecular weight of lignin in native biomass is dependent on the bioresources used and the isolation and purifi cation procedures employed. The three most commonly employed isolation methods are milled wood lignin (MWL), cellulolytic enzyme lignin (CEL), and enzymatic mild acidolysis lignin (EMAL). Common characterization techniques for determining the molecular weight of lignin will be addressed, with an emphasis on gel permeation chromatography (GPC). This review also examines the mechanisms behind several biological, physical, and chemical pre-treatments and their impact on the molecular weight of lignin. The number average molecular weight (Mn), weight average molecular weight (Mw) and polydispersity index (D) all vary in magnitude depending on the biomass source, pre-treatment conditions, and isolation method. Additionally, there is a growing body of literature that supports changes in the molecular weight of lignin in response to genetic modifi cations in the lignin biosynthetic pathways. This review summarizes different procedures for obtaining the molecular weight of lignin that have been used in recent years and highlight future opportunities for applications of lignin.

Tolbert, Allison [Georgia Institute of Technology, Atlanta] [Georgia Institute of Technology, Atlanta; Akinosho, Hannah [Georgia Institute of Technology, Atlanta] [Georgia Institute of Technology, Atlanta; Khunsupat, Taya Ratayakorn [ORNL] [ORNL; Naskar, Amit K [ORNL] [ORNL; Ragauskas, Arthur [Georgia Institute of Technology, Atlanta] [Georgia Institute of Technology, Atlanta

2014-01-01T23:59:59.000Z

437

Control of the positional relationship between a sample collection instrument and a surface to be analyzed during a sampling procedure using a laser sensor  

DOE Patents [OSTI]

A system and method utilizes distance-measuring equipment including a laser sensor for controlling the collection instrument-to-surface distance during a sample collection process for use, for example, with mass spectrometric detection. The laser sensor is arranged in a fixed positional relationship with the collection instrument, and a signal is generated by way of the laser sensor which corresponds to the actual distance between the laser sensor and the surface. The actual distance between the laser sensor and the surface is compared to a target distance between the laser sensor and the surface when the collection instrument is arranged at a desired distance from the surface for sample collecting purposes, and adjustments are made, if necessary, so that the actual distance approaches the target distance.

Van Berkel, Gary J. (Clinton, TN); Kertesz, Vilmos (Knoxville, TN)

2012-02-21T23:59:59.000Z

438

Reference Potential source Data type Sampling site Type of samples Number of samples Method of source  

E-Print Network [OSTI]

samples for Saharan dust from Libya back trajectory analysis Kandler et al. 2009 PSA NAF-2 Illite NAF-4 Illite/kaolinite ratio Chlorite/kaolinite ratio Carbonate content Libya (here: central

Meskhidze, Nicholas

439

Computing Weight Distributions of Binary Linear Block Codes on a CCM ?  

E-Print Network [OSTI]

Computing Weight Distributions of Binary Linear Block Codes on a CCM ? Markus Weinhardt Universit codes on an FPGA­based Custom Computing Machine (CCM). It consists of a heavily pipelined circuit optimality of a code family. Due to the exponential complexity of the weight distribution computation, fast

Weinhardt, Markus

440

Adaptive Fuzzy Weighted Template Matching Using Invariant Features for a Tracking Application  

E-Print Network [OSTI]

to the cited literature, fuzzy logic is also frequently used in pattern recognition and image processingAdaptive Fuzzy Weighted Template Matching Using Invariant Features for a Tracking Application aerial vehicle. Adaptive-fuzzy weighted sum of square distances (SSDs) are utilized for template matching

Efe, Mehmet Ã?nder

Note: This page contains sample records for the topic "adjusted sampling weight" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Comparison of the Monte Carlo adjoint-weighted and differential operator perturbation methods  

SciTech Connect (OSTI)

Two perturbation theory methodologies are implemented for k-eigenvalue calculations in the continuous-energy Monte Carlo code, MCNP6. A comparison of the accuracy of these techniques, the differential operator and adjoint-weighted methods, is performed numerically and analytically. Typically, the adjoint-weighted method shows better performance over a larger range; however, there are exceptions.

Kiedrowski, Brian C [Los Alamos National Laboratory; Brown, Forrest B [Los Alamos National Laboratory

2010-01-01T23:59:59.000Z

442

ORIGINAL PAPER Fine mapping of fw3.2 controlling fruit weight in tomato  

E-Print Network [OSTI]

ORIGINAL PAPER Fine mapping of fw3.2 controlling fruit weight in tomato Na Zhang · Marin Talbot in the Solanaceae family. One of the key traits selected during domestication is fruit mass which is con- trolled by many quantitative trait loci. The fruit weight locus fw3.2 is one of the major loci responsible

van der Knaap, Esther

443

High-Molecular-Weight Polyethylene Glycol Prevents Lethal Sepsis Due to Intestinal Pseudomonas aeruginosa  

E-Print Network [OSTI]

High-Molecular-Weight Polyethylene Glycol Prevents Lethal Sepsis Due to Intestinal Pseudomonas of this study were to test the ability of a high-molecular- weight polyethylene glycol compound, polyethylene: The ability of polyethylene glycol 15­20 to protect the intestinal epi- thelium against the opportunistic

Lee, Ka Yee C.

444

Comparison of the Efficacy of Popular Weight Loss Programs in Sedentary Overweight Women  

E-Print Network [OSTI]

This study compared the efficacy of the Curves® Complete 90-day Challenge (CC), Weight Watchers® Points Plus (WW), Jenny Craig® At Home (JC), and Nutrisystem® Advance Select™ (NS) on weight loss, body composition and/or markers of health and fitness...

Baetge, Claire

2014-08-06T23:59:59.000Z

445

Factors affecting weaning weights of calves produced in Hereford and rotational crossbred herds  

E-Print Network [OSTI]

nursing of their hybrid calves. Godley et al. (1960), after observing the birth weights of Brahman, Hereford, and Aberdeen Angus cattle and their crosses, found that the increase of weight shown by the crossbred types of cattle during early life until...

Tovar-Rodriguez, Jorge

1965-01-01T23:59:59.000Z

446

DATALITE: a Distributed Architecture for Traffic Analysis via Light-weight Traffic Digest  

E-Print Network [OSTI]

DATALITE: a Distributed Architecture for Traffic Analysis via Light-weight Traffic Digest for Traffic Analysis via LIght- weight Traffic digEst, which introduces a set of new distributed algorithms digests (TD's) amongst the network nodes. A TD for N packets only requires O(loglog N) bits of memory

Chao, Jonathan

447

USING WEIGHTED SUM METHOD FOR THE CHOICE OF THE NIGHT VISION GOGGLES BATTERY POWER SUPPLY  

E-Print Network [OSTI]

electrical battery power supply lifetime, pric and weight. © ~1mKeHepllH llayKH, rOA. XUV, 2007,.N'] I into account device working range, weight and price and also electrical battery power supply lifetime, temperature working range and its mechanics. The multicriteria optimization choice of the electrical battery

Mustakerov, Ivan

448

THE WEIGHT FILTRATION FOR REAL ALGEBRAIC VARIETIES CLINT MCCRORY AND ADAM PARUSINSKI  

E-Print Network [OSTI]

. Using the work of Guill´en and Navarro Aznar we associate to each real algebraic variety a filtered by Totaro [37]. He used the work of Guill´en and Navarro Aznar [15] to show the existence, and more recent unpublished work on weight filtrations by Guill´en and Navarro Aznar [16]. Totaro's weight

Parusinski, Adam

449

Inertial impaction air sampling device  

DOE Patents [OSTI]

An inertial impactor to be used in an air sampling device for collection of respirable size particles in ambient air which may include a graphite furnace as the impaction substrate in a small-size, portable, direct analysis structure that gives immediate results and is totally self-contained allowing for remote and/or personal sampling. The graphite furnace collects suspended particles transported through the housing by means of the air flow system, and these particles may be analyzed for elements, quantitatively and qualitatively, by atomic absorption spectrophotometry. 3 figs.

Dewhurst, K.H.

1987-12-10T23:59:59.000Z

450

Spent nuclear fuel sampling strategy  

SciTech Connect (OSTI)

This report proposes a strategy for sampling the spent nuclear fuel (SNF) stored in the 105-K Basins (105-K East and 105-K West). This strategy will support decisions concerning the path forward SNF disposition efforts in the following areas: (1) SNF isolation activities such as repackaging/overpacking to a newly constructed staging facility; (2) conditioning processes for fuel stabilization; and (3) interim storage options. This strategy was developed without following the Data Quality Objective (DQO) methodology. It is, however, intended to augment the SNF project DQOS. The SNF sampling is derived by evaluating the current storage condition of the SNF and the factors that effected SNF corrosion/degradation.

Bergmann, D.W.

1995-02-08T23:59:59.000Z

451

Inertial impaction air sampling device  

DOE Patents [OSTI]

An inertial impactor to be used in an air sampling device for collection of respirable size particles in ambient air which may include a graphite furnace as the impaction substrate in a small-size, portable, direct analysis structure that gives immediate results and is totally self-contained allowing for remote and/or personal sampling. The graphite furnace collects suspended particles transported through the housing by means of the air flow system, and these particles may be analyzed for elements, quantitatively and qualitatively, by atomic absorption spectrophotometry.

Dewhurst, Katharine H. (13150 Wenonah SE. Apt. 727, Albuquerque, NM 87123)

1990-01-01T23:59:59.000Z

452

Inertial impaction air sampling device  

DOE Patents [OSTI]

An inertial impactor is designed which is to be used in an air sampling device for collection of respirable size particles in ambient air. The device may include a graphite furnace as the impaction substrate in a small-size, portable, direct analysis structure that gives immediate results and is totally self-contained allowing for remote and/or personal sampling. The graphite furnace collects suspended particles transported through the housing by means of the air flow system, and these particles may be analyzed for elements, quantitatively and qualitatively, by atomic absorption spectrophotometry. 3 figs.

Dewhurst, K.H.

1990-05-22T23:59:59.000Z

453

Sample Licensing Agreements | Partnerships | ORNL  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 -the Mid-Infrared0 ResourceAwardsSafeguards and SecuritySafety Salt LakeSampleSample

454

E-Print Network 3.0 - acute toxicity screening Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

(1) Steady-state compensatory adjustments by an organism to the alteration of environmental conditions. Adjustments can be behavioral, physiological, or biochemical. (2)...

455

Managing Commodity Risks in Highway Contracts: Quantifying Premiums, Accounting for Correlations Among Risk Factors, and Designing Optimal Price-Adjustment Contracts  

E-Print Network [OSTI]

fixed-price contracts. In turn, the contractors respond by adding premiums in bid prices. If the contractors overprice the risk, the price of fixed-price contract could exceed the price of the contract with adjustment clauses. Consequently, highway...

Zhou, Xue

2012-02-14T23:59:59.000Z

456

Offline solid phase microextraction sampling system  

DOE Patents [OSTI]

An offline solid phase microextraction (SPME) sampling apparatus for enabling SPME samples to be taken a number of times from a previously collected fluid sample (e.g. sample atmosphere) stored in a fused silica lined bottle which keeps volatile organics in the fluid sample stable for weeks at a time. The offline SPME sampling apparatus has a hollow body surrounding a sampling chamber, with multiple ports through which a portion of a previously collected fluid sample may be (a) released into the sampling chamber, (b) SPME sampled to collect analytes for subsequent GC analysis, and (c) flushed/purged using a fluidically connected vacuum source and purging fluid source to prepare the sampling chamber for additional SPME samplings of the same original fluid sample, such as may have been collected in situ from a headspace.

Harvey, Chris A. (French Camp, CA)

2008-12-16T23:59:59.000Z

457

Waste tank characterization sampling limits  

SciTech Connect (OSTI)

This document is a result of the Plant Implementation Team Investigation into delayed reporting of the exotherm in Tank 241-T-111 waste samples. The corrective actions identified are to have immediate notification of appropriate Tank Farm Operations Shift Management if analyses with potential safety impact exceed established levels. A procedure, WHC-IP-0842 Section 12.18, ``TWRS Approved Sampling and Data Analysis by Designated Laboratories`` (WHC 1994), has been established to require all tank waste sampling (including core, auger and supernate) and tank vapor samples be performed using this document. This document establishes levels for specified analysis that require notification of the appropriate shift manager. The following categories provide numerical values for analysis that may indicate that a tank is either outside the operating specification or should be evaluated for inclusion on a Watch List. The information given is intended to translate an operating limit such as heat load, expressed in Btu/hour, to an analysis related limit, in this case cesium-137 and strontium-90 concentrations. By using the values provided as safety flags, the analytical laboratory personnel can notify a shift manager that a tank is in potential violation of an operating limit or that a tank should be considered for inclusion on a Watch List. The shift manager can then take appropriate interim measures until a final determination is made by engineering personnel.

Tusler, L.A.

1994-09-02T23:59:59.000Z

458

Sample Internship Posting Department Name  

E-Print Network [OSTI]

Sample Internship Posting Department Name: Internship Title: Location: Description of Organization are examples from other internship postings Interns will: · Analyze potential investments · Shadow team members(s) in ________ is desirable For a list of majors see http://admissions.vanderbilt.edu/major Internship Period: The following

Bordenstein, Seth

459

Environmental surveillance master sampling schedule  

SciTech Connect (OSTI)

This document contains the planned 1994 schedules for routine collection of samples for the Surface Environmental Surveillance Project (SESP), Drinking Water Project, and Ground-Water Surveillance Project. Samples are routinely collected for the SESP and analyzed to determine the quality of air, surface water, soil, sediment, wildlife, vegetation, foodstuffs, and farm products at Hanford Site and surrounding communities. The responsibility for monitoring the onsite drinking water falls outside the scope of the SESP. The Hanford Environmental Health Foundation is responsible for monitoring the nonradiological parameters as defined in the National Drinking Water Standards while PNL conducts the radiological monitoring of the onsite drinking water. PNL conducts the drinking water monitoring project concurrent with the SESP to promote efficiency and consistency, utilize the expertise developed over the years, and reduce costs associated with management, procedure development, data management, quality control and reporting. The ground-water sampling schedule identifies ground-water sampling events used by PNL for environmental surveillance of the Hanford Site.

Bisping, L.E.

1994-02-01T23:59:59.000Z

460

Environmental Analysis & Policy: Sample Pathway  

E-Print Network [OSTI]

Environmental Analysis & Policy: Sample Pathway Semester I Semester II Freshman Year CGS Core CGS Sustainable Development OR Spring GE 425 U.S. Environmental Policy (Senior) GE 309 Intermediate Env Analysis (Fall) EAP Elective Summer Environmental Internship Senior Year GE 420 Env Policy Analysis 4 th Semester

Goldberg, Bennett

Note: This page contains sample records for the topic "adjusted sampling weight" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

AUTOMATING GROUNDWATER SAMPLING AT HANFORD  

SciTech Connect (OSTI)

Until this past October, Fluor Hanford managed Hanford's integrated groundwater program for the U.S. Department of Energy (DOE). With the new contract awards at the Site, however, the CH2M HILL Plateau Remediation Company (CHPRC) has assumed responsibility for the groundwater-monitoring programs at the 586-square-mile reservation in southeastern Washington State. These programs are regulated by the Resource Conservation and Recovery Act (RCRA) and the Comprehensive Environmental Response Compensation and Liability Act (CERCLA). The purpose of monitoring is to track existing groundwater contamination from past practices, as well as other potential contamination that might originate from RCRA treatment, storage, and disposal (TSD) facilities. An integral part of the groundwater-monitoring program involves taking samples of the groundwater and measuring the water levels in wells scattered across the site. More than 1,200 wells are sampled each year. Historically, field personnel or 'samplers' have been issued pre-printed forms that have information about the well(s) for a particular sampling evolution. This information is taken from the Hanford Well Information System (HWIS) and the Hanford Environmental Information System (HEIS)--official electronic databases. The samplers used these hardcopy forms to document the groundwater samples and well water-levels. After recording the entries in the field, the samplers turned the forms in at the end of the day and the collected information was posted onto a spreadsheet that was then printed and included in a log book. The log book was then used to make manual entries of the new information into the software application(s) for the HEIS and HWIS databases. This is a pilot project for automating this tedious process by providing an electronic tool for automating water-level measurements and groundwater field-sampling activities. The automation will eliminate the manual forms and associated data entry, improve the accuracy of the information recorded, and enhance the efficiency and sampling capacity of field personnel. The goal of the effort is to eliminate 100 percent of the manual input to the database(s) and replace the management of paperwork by the field and clerical personnel with an almost entirely electronic process. These activities will include the following: scheduling the activities of the field teams, electronically recording water-level measurements, electronically logging and filing Groundwater Sampling Reports (GSR), and transferring field forms into the site-wide Integrated Document Management System (IDMS).

CONNELL CW; HILDEBRAND RD; CONLEY SF; CUNNINGHAM DE

2009-01-16T23:59:59.000Z

462

Hanford Site Environmental Surveillance Master Sampling Schedule  

SciTech Connect (OSTI)

This document contains the CY2000 schedules for the routine collection of samples for the Surface Environmental Surveillance Project (SESP) and Drinking Water Monitoring Project. Each section includes sampling locations, sample types, and analyses to be performed.

Bisping, Lynn E.

2000-01-27T23:59:59.000Z

463

Impacts of the extended-weight coal haul road system. Final research report, December 1995  

SciTech Connect (OSTI)

The Extended-Weight Coal Haul Road System, created by the Kentucky Legislature in 1986, consists of all roads which carry over 50,000 tons of coal in a calendar year. Trucks hauling coal on this system are authorized to exceed normal weight limits through the payment of an annual decal fee. A research study was initiated in July of 1992 to analyze the impacts of the extended-weight system. Analyses in this report are based on the following: historical data on coal production and transportation: data from coal decal applications; interviews of legislators, transportation officials, coal company representatives, and coal trucking representatives; newspaper articles; vehicle classification data; analyses of pavement costs; pavement rideability data; and accident data. Primary conclusions include; (1) The extended-weight system has apparently been somewhat successful in accomplishing the objective of enhancing the competitiveness and economic viability of the Kentucky coal industry; (2) Overall accident rates did not increase as a result of implementation of the extended-weight system, but the fatal accident injury rates were significantly higher on the extended-weight system and for trucks operating with the coal decal; (3) Advance-warning flashers have been evaluated and recommended as a means of reducing intersection accidents involving heavy/coal trucks; (4) The coal-decal fee structure results in a net annual loss in Road Fund revenue of approximately $2 million; (5) Forty percent of revenue from decal fees are allocated to counties even though county-maintained roads comprise only eight percent of the extended-weight system; (6) Heavier weights of coal-decal trucks add approximately $9 million annually to the pavement overlay costs; (7) Road users throughout the state are subsidizing the movement of Kentucky coal by participating in the cost of maintaining and improving the highway system; and (8) Possibly reflecting the increased funding of extended-weight roads.

Pigman, J.; Crabtree, J.; Agent, K.; Graves, C.; Deacon, J.

1995-12-01T23:59:59.000Z

464

Tank farm backlog soil sample analysis plan  

SciTech Connect (OSTI)

This document describes the measures to collect samples, perform testing on samples, and make decisions to obtain a Contained- in Determination for tank farms backlog soil.

Ahlers, J.D., Westinghouse Hanford

1996-07-17T23:59:59.000Z

465

Human birth weight patterns as an indicator of populations subject to environmental stress  

SciTech Connect (OSTI)

The present study was undertaken to address two questions of central importance to the possibility of using birth weight as a monitor of the health status of populations. First, can one discern consistent effects of known influencing factors while controlling for only a small number of other influencing factors. This is important because standard birth certificates provide only a few variables in addition to weight. If known effects are obscured by noise from unknown sources, the effects of environmental stress may likewise be obscured. Second, if known effects are discernable, do known stressed populations show predictable patterns of depressed birth weight.

Curtiss, J.R.B.; Ginevan, M.E.; Brown, C.D.

1981-01-01T23:59:59.000Z

466

Occupational requirements as compared to worker capabilities with respect to total weight lifted per day  

E-Print Network [OSTI]

: Gender r resentation in each wei ht rou Weight Group 0- 7000- 11500-22500 22500-34000 34000-45500 7000 k 11500 kg k kg 'lo of Females '/o of Males 38 62 4 96 6 94 2 98 6 94 13 Male A erage Age p=o. cool Female Average Age p =-0. 07 87...). Females in the jobs with the lowest weight demands had significantly lower working VO& measurements than those in jobs with higher weight demands. Females in the 0-7000 kg group had a mean working VOq value of 0. 8 L/min, which was significantly...

Narvaez, Angela Marae

2012-06-07T23:59:59.000Z

467

Adaptive Sampling in Hierarchical Simulation  

SciTech Connect (OSTI)

We propose an adaptive sampling methodology for hierarchical multi-scale simulation. The method utilizes a moving kriging interpolation to significantly reduce the number of evaluations of finer-scale response functions to provide essential constitutive information to a coarser-scale simulation model. The underlying interpolation scheme is unstructured and adaptive to handle the transient nature of a simulation. To handle the dynamic construction and searching of a potentially large set of finer-scale response data, we employ a dynamic metric tree database. We study the performance of our adaptive sampling methodology for a two-level multi-scale model involving a coarse-scale finite element simulation and a finer-scale crystal plasticity based constitutive law.

Knap, J; Barton, N R; Hornung, R D; Arsenlis, A; Becker, R; Jefferson, D R

2007-07-09T23:59:59.000Z

468

Environmental surveillance master sampling schedule  

SciTech Connect (OSTI)

Environmental surveillance of the Hanford Site and surrounding areas is conducted by the Pacific Northwest Laboratory (PNL) for the US Department of Energy (DOE). This document contains the planned schedule for routine sample collection for the Surface Environmental Surveillance Project (SESP) and Ground-Water Monitoring Project. Samples for radiological analyses include Air-Particulate Filter, gases and vapor; Water/Columbia River, Onsite Pond, Spring, Irrigation, and Drinking; Foodstuffs/Animal Products including Whole Milk, Poultry and Eggs, and Beef; Foodstuffs/Produce including Leafy Vegetables, Vegetables, and Fruit; Foodstuffs/Farm Products including Wine, Wheat and Alfalfa; Wildlife; Soil; Vegetation; and Sediment. Direct Radiation Measurements include Terrestrial Locations, Columbia River Shoreline Locations, and Onsite Roadway, Railway and Aerial, Radiation Surveys.

Bisping, L E

1992-01-01T23:59:59.000Z

469

Rock Sampling | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia:FAQ < RAPID Jump to: navigation, searchVirginia BlueRiverwoods,Rock Sampling Details Activities (18) Areas

470

INCOHERENCE AND THE PARAMETRIC TEST FRAMEWORK: MISCONCEIVED RELATIONSHIPS AMONG SAMPLE, SAMPLING DISTRIBUTION, AND POPULATION  

E-Print Network [OSTI]

INCOHERENCE AND THE PARAMETRIC TEST FRAMEWORK: MISCONCEIVED RELATIONSHIPS AMONG SAMPLE, SAMPLING Keywords: Parametric test, sample, population, sampling distributions Parametric tests are frequently parametric tests, nor hold beliefs that are consistent with that framework. The parametric test framework

Yu, Alex

471

Cognitive and Representational Cues for Assigning Weight to Numerical Information in Decision-Making  

E-Print Network [OSTI]

Beware of samples! A cognitive-ecological sampling approachexperience. Journal of Cognitive Neuroscience, 16(7), 1131-factors method. Journal of Cognitive Neuroscience, 8(1), 47-

Rinne, Luke Frederick

2010-01-01T23:59:59.000Z

472

Fusion and singular vectors in A1{(1)} highest weight cyclic modules  

E-Print Network [OSTI]

We show how the interplay between the fusion formalism of conformal field theory and the Knizhnik--Zamolodchikov equation leads to explicit formulae for the singular vectors in the highest weight representations of A1{(1)}.

M. Bauer; N. Sochen

1992-01-31T23:59:59.000Z

473

T2*-weighted magnetic resonance imaging used to detect coagulative necrosis in tissue  

E-Print Network [OSTI]

to prevent unnecessary collateral damage to surrounding healthy tissue. This research focuses on using T2*-weighted FLASH magnetic resonance imaging to detect irreversible changes in i . n vitro bovine liver tissue and tissuesimulating polyacrylamide gel...

Van Hyfte, John Bruce

1997-01-01T23:59:59.000Z

474

Delay Analysis of Maximum Weight Scheduling in Wireless Ad Hoc Networks  

E-Print Network [OSTI]

This paper studies delay properties of the well-known maximum weight scheduling algorithm in wireless ad hoc networks. We consider wireless networks with either one-hop or multihop flows. Specifically, this paper shows ...

Modiano, Eytan H.

475

Musculoskeletal adaptation to Partial Weight Suspension : studies of Lunar and Mars loading  

E-Print Network [OSTI]

As human spaceflight extends in both duration and scope, it is critical to better understand the physiologic effects of this novel environment. In the weight bearing structures of the body, bone loss and muscle atrophy far ...

Wagner, Erika Brown

2007-01-01T23:59:59.000Z

476

Improved performance of ultra-high molecular weight polyethylene for orthopedic applications  

E-Print Network [OSTI]

A considerable number of total-joint replacement devices used in orthopedic medicine involve articulation between a metallic alloy and ultra-high molecular weight polyethylene (UHMWPE). Though this polymer has excellent wear resistance, the wear...

Plumlee, Kevin Grant

2009-05-15T23:59:59.000Z

477

Methods for increasing the thermal conductivity of ultra-high molecular weight polyethylene (UHMWPE)  

E-Print Network [OSTI]

A two-part study was conducted to determine methods for producing ultra-high molecular weight polyethylene with high thermal conductivity by way of polymer chain orientation. The first portion of this report surveys current ...

Miler, Josef L

2006-01-01T23:59:59.000Z

478

Role of viscosity in the accurate prediction of source-terms for high molecular weight substances  

E-Print Network [OSTI]

This study shows that using better material property predictions results in better source-term modeling for high molecular weight substances. Viscosity, density, and enthalpy are used as a function of process variables, namely, temperature...

Shaikh, Irfan Yusuf

1999-01-01T23:59:59.000Z

479

Online Supplement to "Bounding Distributions for the Weight of a Minimum Spanning Tree in Stochastic  

E-Print Network [OSTI]

Online Supplement to "Bounding Distributions for the Weight of a Minimum Spanning Tree in Stochastic Networks" Kevin R. Hutson · Douglas R. Shier Department of Mathematics & Computer Science, Denison

Shier, Douglas R.

480

Light-Weight, Low-Cost, Single-Phase, Liquid-Cooled Cold Plate (Presentation)  

SciTech Connect (OSTI)

This presentation, 'Light-Weight, Low-Cost, Single-Phase Liquid-Cooled Cold Plate,' directly addresses program goals of increased power density, specific power, and lower cost of power electronics components through improved thermal management.

Narumanchi, S.

2013-07-01T23:59:59.000Z

Note: This page contains sample records for the topic "adjusted sampling weight" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Light-Weight, Single-Phase, Liquid-Cooled Cold Plate (Presentation)  

SciTech Connect (OSTI)

This presentation, 'Light-Weight, Low-Cost, Single-Phase Liquid-Cooled Cold Plate,' directly addresses program goals of increased power density, specific power, and lower cost of power electronics components through improved thermal management.

Narumanchi, S.

2013-07-01T23:59:59.000Z

482

An evaluation of gender-based weighting factors for internal dosimetry  

E-Print Network [OSTI]

body irradiation. Weighting factors are used in the calculation of effective dose formerly called the effective dose equivalent. The 1990 recommendations of International Commission on Radiological Protection (ICRP) Publication 60 introduce a set...

Spiars, Joanna Hamilton

1994-01-01T23:59:59.000Z

483

Texas Adapted Genetic Strategies for Beef Cattle X: Frame Score, Frame Size, and Weight  

E-Print Network [OSTI]

Body size is an important genetic factor in beef cattle production. Size is most accurately estimated by considering several factors, such as weight, skeletal size and body condition. Frame Scores are a way of estimating skeletal size based on hip...

Hammack, Stephen P.; Gill, Ronald J.

2009-04-02T23:59:59.000Z

484

Statistical Review of Data from DWPF's Process Samples for Batches 19 Through 30  

SciTech Connect (OSTI)

The measurements derived from samples taken during the processing of batches 19 through 30 at the Defense Waste Processing Facility (DWPF) affords an opportunity for review and comparisons. This report has looked at some of the statistics from these data. Only the data reported by the DWPF lab (that is, the data provided by the lab as representative of the samples taken) are available for this analysis. In some cases, the sample results reported may be a subset of the sample results generated by the analytical procedures. A thorough assessment of the DWPF lab's analytical procedures would require the complete set of data. Thus, the statistics reported here, specifically, as they relate to analytical uncertainties, are limited to the reported data for these samples, A fell for the consistency of the incoming slurry is the estimation of the components of variation for the Sludge Receipt and Adjustment Tank (SRAT) receipts. In general, for all of the vessels, the data from batches after 21 show smaller batch-to-batch variation than the data from all the batches. The relative contributions of batch-to-batch versus residual, which includes analytical, are presented in these analyses.

Edwards, T.B.

1999-04-06T23:59:59.000Z

485

New Environmentally Friendly Dispersants for High Temperature Invert-Emulsion Drilling Fluids Weighted by Manganese Tetraoxide  

E-Print Network [OSTI]

filtration. 3. Specific fluid weight is required to hydrostatically balance formation pressures and to control the well column. The desired fluid density is attained by addition of weighting agents like barite and calcium carbonate. OBMs are water...) minimized drilling problems related to water-sensitive shales. Also, Bennett (1984) mentioned that mineral-oil based invert-emulsion fluids have greater tolerance to the contaminants such as carbonates, hydrogen sulfide, anhydrite, salt, or cement...

Rehman, Abdul

2012-02-14T23:59:59.000Z

486

Limiting diffusion coefficients of heavy molecular weight organic contaminants in supercritical carbon dioxide  

E-Print Network [OSTI]

LIMITING DIFFUSION COEFFICIENTS OF HEAVY MOLECULAR WEIGHT ORGANIC CONTAMINANTS IN SUPERCRITICAL CARBON DIOXIDE A Thesis by MAURICIO OREJUELA Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment... of the requirements for the degree of MASTER OF SCIENCE August 1994 Major Subject: Chemical Engineering LIMITING DIFFUSION COEFFICIENTS OF HEAVY MOLECULAR WEIGHT ORGANIC CONTAMINANTS IN SUPERCRITICAL CARBON DIOXIDE A Thesis by MAURICIO OREJUELA Submitted...

Orejuela, Mauricio

1994-01-01T23:59:59.000Z

487

Cocaine’s Appetite for Fat and the Consequences on Body Weight  

E-Print Network [OSTI]

. There are currently no guidelines for health care professionals on how to address weight change in cocaine-dependent individuals receiving treatment. Instead, clinical practice seems to be dominated by the view that this weight gain during recovery reflects a... (?1-R and ?2-R), increases thermogenesis and reduces leptin production respectively. 10 References 1. VanBuskirk KA, Potenza MN 2010 The Treatment of Obesity and Its Co-Occurrence With Substance Use Disorders. Journal of Addiction Medicine...

Billing, L.; Ersche, K. D.

2014-01-01T23:59:59.000Z

488

Impacts of the extended-weight coal haul road system (interim report). Research report  

SciTech Connect (OSTI)

The Extended-Weight Coal Haul Road System, created by Kentucky`s Legislature in 1986, consists of all roads which carry over 50,000 tons of coal in a calendar year. Trucks hauling coal on this system are authorized to exceed normal weight limits through the payment of an annual decal fee. A research study was initiated in July of 1992 to analyze the impacts of the extended-weight system. This interim report prepared after one year of a three-year study, describes the analyses performed thus far and presents preliminary findings, recommendations, and a discussion of future work. Analyses in this report are based on: historical data on coal production and transportation; data from coal decal applications; interviews of legislators, transportation officials, coal company representatives, and coal trucking representatives: newspaper articles; vehicle classification data; a pavement cost analysis; and accident data. Preliminary conclusions include: (1) The extended-weight system has apparently been somewhat successful in accomplishing the primary objectives: to enhance the competitiveness and economic viability of Kentucky`s coal industry and to eliminate the perceived need for cal haulers to violate the law in order to be competitive; (2) Overall accident rates are no higher on the extended-weight system than on other comparable routes, but the fatal accident rate is significantly higher on the extended-weight system; (3) The coal-decal fee structure results in a net annual loss in Road Fund revenue of approximately $2 million; (4) Forty percent of the revenue from decal sales is allocated to the counties, although less than ten percent of the extended-weight system in county-maintained; (5) The heavier weights of coal-decal trucks add approximately $9 million annually to pavement overlay costs and increase other highway costs. (6) Road users throughout the state are subsidizing the movement of Kentucky coal by underwriting the increased costs.

Crabtree, J.D.; Pigman, J.G.; Deacon, J.A.; Agent, K.R.

1993-10-01T23:59:59.000Z

489

Factors affecting calf and dam weights and their effects on breeding programs  

E-Print Network [OSTI]

FACTORS AFFECTING CALF AND DAM WEIGHTS AND THEIR EFFECTS ON BREEDING PROGRAMS A Thesis By LAMRENCE ALLEN MADDOX, JR. Submitted to the Graduate College of the Texas A&M University in partial fulf illment of the requirements for the degree... of MASTER OF SCIENCE May, 1964 Major Subject: Animal Breeding FACTORS AFFECTING CALF AND DAM WEIGHTS AND THEIR EFFECTS ON BREEDING PROGRAMS A Thesis By IAWRENCE ALLEN MADDOX, JR Approved as to style and content by: (Chairman of Commit ee) (Head...

Maddox, Lawrence Allen

1964-01-01T23:59:59.000Z

490

Mature weights and lean maturing patterns of diverse breedtypes of cattle  

E-Print Network [OSTI]

MATURE WEIGHTS AND LEAN MATURING PATTERNS OF DIVERSE BREEDTYPES OF CATTLE A Thesis by MOHAMMAD HASAN RAJAB Submitted to the Graduate College of Texas ABM University in partial fulfullment of the requirement for the degree of MASTER... OF SCIENCE May 1983 Major Subject: Animal Breeding MATURE WEIGHTS AND LEAN MATURING PATTERNS OF DIVERSE BREEDTYPES OF CATTLE A Thesis by MOHAMMAD HASAN RAJAB Approved as to style and content by: (Co-Chairman of Committee) Gerald M. Smith (Co...

Rajab, Mohammad Hasan

1983-01-01T23:59:59.000Z

491

Discrete quantum gravity: the Lorentz invariant weight for the Barrett-Crane model  

E-Print Network [OSTI]

In a recent paper [1] we have constructed the spin and tensor representations of SO(4) from which the invariant weight can be derived for the Barrett-Crane model in quantum gravity. By analogy with the SO(4) group, we present the complexified Clebsch-Gordan coefficients in order to construct the Biedenharn-Dolginov function for the SO(3,1) group and the spherical function as the Lorentz invariant weight of the model.

M. Lorente

2004-11-14T23:59:59.000Z

492

Characterization of various bitumen samples from tar sands  

SciTech Connect (OSTI)

Bitumen is a complex mixture of a large of number of organic molecules. The composition of bitumen and the nature of their various individual components has been the subject of considerable research during the past two decades. Various modes of extraction of bitumen from oil sands such as heat, extreme mechanical force, chemical agents and solvents could significantly affect some properties of bitumen. Variations in the composition of the oil sands feed stock could also affect the properties of the extracted bitumen. However, the most commonly used analytical techniques such as elemental analyses, density and viscosity cannot detect small compositional differences in the various samples of bitumen. With developments in instrumentation and techniques the structural characterization of complex petroleum fractions employing high resolution proton and 13/sub C/ nuclear magnetic resonance (NMR) spectroscopy is becoming more popular. The parameters describe structural features, such as the fraction of carbon that is aromatic, the number and length of alkyl substituents in an average molecule, the percentage of aromatic carbons that are substituted and the number of aromatic rings per molecule. Given sufficient data these parameters can provide useful characterization of a hydrocarbon mixture. In the authors' laboratories, the authors have collected a number of bitumen samples obtained from different feedstocks employing a variety of extraction techniques. It was of interest to investigate any differences between these samples from different sources. This paper reports a detailed investigation of average structural parameters by the combined use of elemental analyses, molecular weight determinations and proton and 13/sub C/NMR spectroscopy. A total of twenty three butimen samples have been studied.

Majid, A.; Bornais, J.; Hutchison, R.A.

1988-06-01T23:59:59.000Z

493

Cars on a diet : the material and energy impacts of passenger vehicle weight reduction in the U.S.  

E-Print Network [OSTI]

Vehicle weight reduction is a known strategy to address growing concerns about greenhouse gas emissions and fuel use by passenger vehicles. We find that every 10% reduction in vehicle weight can cut fuel consumption by ...

Cheah, Lynette W. (Lynette Wan Ting)

2010-01-01T23:59:59.000Z

494

Sample introduction apparatus for a flow cytometer  

DOE Patents [OSTI]

A sample introduction system for a flow cytometer allows easy change of sample containers such as test tubes and facilitates use in high pressure environments. The sample container includes a cap having a pressure supply chamber and a sample container attachment cavity. A sample container may be automatically positioned into the attachment cavity so as to sealably engage the end of the sample container as its outer surface. This positioning may be accomplished through some sample introduction mechanism. To facilitate cleaning HPLC tubing and fittings may be used in a manner which facilitates removable of the entire tubing from both the nozzle container and other sample container cap to permit its replacement to avoid contamination. The sample container support may include horizontal stops which loosely limit the movement of the sample container and thus avoid further stresses upon it.

Van den Engh, Ger (Seattle, WA)

1998-01-01T23:59:59.000Z

495

Sample introduction system for a flow cytometer  

DOE Patents [OSTI]

A sample introduction system for a flow cytometer allows easy change of sample containers such as test tubes and facilitates use in high pressure environments. The sample container includes a cap having a pressure supply chamber and a sample container attachment cavity. A sample container may be automatically positioned into the attachment cavity so as to sealably engage the end of the sample container as its outer surface. This positioning may be accomplished through some sample introduction mechanism. To facilitate cleaning, HPLC tubing and fittings may be used in a manner which facilitates removing of the entire tubing from both the nozzle container and other sample container cap to permit its replacement to avoid contamination. The sample container support may include horizontal stops which loosely limit the movement of the sample container and thus avoid further stresses upon it. 3 figs.

Engh, G. van den

1997-02-11T23:59:59.000Z

496

Sample introduction system for a flow cytometer  

DOE Patents [OSTI]

A sample introduction system for a flow cytometer allows easy change of sample containers such as test tubes and facilitates use in high pressure environments. The sample container includes a cap having a pressure supply chamber and a sample container attachment cavity. A sample container may be automatically positioned into the attachment cavity so as to sealably engage the end of the sample container as its outer surface. This positioning may be accomplished through some sample introduction mechanism. To facilitate cleaning, HPLC tubing and fittings may be used in a manner which facilitates removing of the entire tubing from both the nozzle container and other sample container cap to permit its replacement to avoid contamination. The sample container support may include horizontal stops which loosely limit the movement of the sample container and thus avoid further stresses upon it.

Van den Engh, Ger (Seattle, WA)

1997-01-01T23:59:59.000Z

497

Sample introduction apparatus for a flow cytometer  

DOE Patents [OSTI]

A sample introduction system for a flow cytometer allows easy change of sample containers such as test tubes and facilitates use in high pressure environments. The sample container includes a cap having a pressure supply chamber and a sample container attachment cavity. A sample container may be automatically positioned into the attachment cavity so as to sealably engage the end of the sample container as its outer surface. This positioning may be accomplished through some sample introduction mechanism. To facilitate cleaning HPLC tubing and fittings may be used in a manner which facilitates removable of the entire tubing from both the nozzle container and other sample container cap to permit its replacement to avoid contamination. The sample container support may include horizontal stops which loosely limit the movement of the sample container and thus avoid further stresses upon it. 3 figs.

Van den Engh, G.

1998-03-10T23:59:59.000Z

498

Synchronized sampling improves fault location  

SciTech Connect (OSTI)

Transmission line faults must be located accurately to allow maintenance crews to arrive at the scene and repair the faulted section as soon as possible. Rugged terrain and geographical layout cause some sections of power transmission lines to be difficult to reach. In the past, a variety of fault location algorithms were introduced as either an add-on feature in protective relays or stand-alone implementation in fault locators. In both cases, the measurements of current and voltages were taken at one terminal of a transmission line only. Under such conditions, it may become difficult to determine the fault location accurately, since data from other transmission line ends are required for more precise computations. In the absence of data from the other end, existing algorithms have accuracy problems under several circumstances, such as varying switching and loading conditions, fault infeed from the other end, and random value of fault resistance. Most of the one-end algorithms were based on estimation of voltage and current phasors. The need to estimate phasors introduces additional difficulty in high-speed tripping situations where the algorithms may not be fast enough in determining fault location accurately before the current signals disappear due to the relay operation and breaker opening. This article introduces a unique concept of high-speed fault location that can be implemented either as a simple add-on to the digital fault recorders (DFRs) or as a stand-alone new relaying function. This advanced concept is based on the use of voltage and current samples that are synchronously taken at both ends of a transmission line. This sampling technique can be made readily available in some new DFR designs incorporating receivers for accurate sampling clock synchronization using the satellite Global Positioning System (GPS).

Kezunovic, M. [Texas A and M Univ., College Station, TX (United States)] [Texas A and M Univ., College Station, TX (United States); Perunicic, B. [Lamar Univ., Beaumont, TX (United States)] [Lamar Univ., Beaumont, TX (United States)

1995-04-01T23:59:59.000Z

499

Licensing Guide and Sample License  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: VegetationEquipment Surfaces and Interfaces Sample6, 2011 LawrenceE CAnalytical InstrumentationEnergy

500

Sample Environments at Sector 30  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 -the Mid-Infrared0 ResourceAwardsSafeguards and SecuritySafety Salt LakeSample