Powered by Deep Web Technologies
Note: This page contains sample records for the topic "addthis remarks prepared" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Arkansas Preparing for Wind Power | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Arkansas Preparing for Wind Power Arkansas Preparing for Wind Power April 15, 2010 - 5:25pm Addthis Joshua DeLung Renowned science fiction author Isaac Asimov once said, "No...

2

Remarks from the Acting Deputy Secretary  

Broader source: Energy.gov [DOE]

Remarks as prepared for delivery by Acting Deputy Secretary of Energy Jeffrey Kupfer; State of Environmental Justice in America; May 22, 2008; Washington, DC.

3

Energy Secretary Moniz's Remarks at Hampton University in Hampton...  

Office of Environmental Management (EM)

commitment to making America a magnet for good jobs, business investment and innovation. Below are excerpts of the Secretary's remarks as prepared for delivery: "As...

4

Prepared  

Office of Legacy Management (LM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment ofDepartment ofofOxford SiteToledo SiteTonawandaUniversity21Prepared by Oak Ridge

5

Secretary Moniz's Remarks at the QER Stakeholders Meeting, Infrastruct...  

Broader source: Energy.gov (indexed) [DOE]

April 11, 2014 - 11:46am Addthis Dr. Ernest Moniz Dr. Ernest Moniz Secretary of Energy Thank you, John, and thanks to Melanie. I'd like to add my gratitude and...

6

Closing Remarks | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:Year in Review: Top FiveDepartment ofCarrie NoonanClassificationDepartmentClosing Remarks Closing

7

Secretary Steven Chu Remarks as Prepared for Delivery to the...  

Energy Savers [EERE]

obligations. In February, the New START Treaty between the United States and Russia entered into force. Our two nations will reduce the number of deployed warheads to the...

8

Remarks As Prepared for Delivery by Secretary of Energy Samuel...  

Office of Environmental Management (EM)

of liquefied natural gas, and have sought cooperation with potential suppliers in Russia, Australia, Africa, and the Caribbean, as well as the Middle East. But in order to...

9

Secretary Steven Chu's Remarks as Prepared for Delivery at the...  

Office of Environmental Management (EM)

built the first electricity transmission system, China has the highest voltage and capacity transmission lines. We built the first nuclear reactor, the first solar cell, and the...

10

Secretary Steven Chu's Remarks as Prepared for Delivery at the...  

Office of Environmental Management (EM)

and chemistry societies, including the Perkin Medal, the highest honor given by the U.S. industrial chemical industry. The Chemical and Engineering News named him one of the 75...

11

Deputy Secretary Poneman's Remarks as Prepared for Delivery at...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

opportunities to create jobs, save consumers and businesses money, and cut carbon pollution. As Secretary Chu likes to say, energy efficiency is not just low-hanging fruit,...

12

Secretary Chu's Remarks as Prepared for Delivery at the Washington...  

Office of Environmental Management (EM)

Benjamin: You got me. You could drift around for years - and thanks to President Obama's health care plan, you would still be covered on your parent's health insurance I urge you...

13

National Coal Council Presentation/Prepared Remarks | Department of Energy  

Office of Environmental Management (EM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of EnergyEnergyENERGY TAXBalanced Scorecard Federal2 to:DieselEnergy Auditor U.S. Department

14

Secretary Chu's Remarks as Prepared for Delivery at the Washington  

Office of Environmental Management (EM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of Energy Power.pdf11-161-LNG |September2-SCORECARD-01-24-13DiscoversGEPartnerships |Energy and

15

Secretary Chu's Remarks at Detroit Economic Club -- As Prepared for  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administrationcontroller systemsBi (2) Sr (2)ScienceScientistsON THE5,to Visit Pantex PlantDelivery

16

REFF West Presentation/Prepared Remarks | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion | Department ofT ib l L dDepartment ofList? | DepartmentEnergy RECOVERY ACTREFF West

17

Tribal Summit - Secretary Chu's Prepared Remarks | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-Up from theDepartment of EnergyThe

18

Deputy Secretary Poneman's Remarks at TERI - As Prepared for Delivery |  

Broader source: Energy.gov (indexed) [DOE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of EnergyEnergyENERGYWomen Ownedof EnergyAdvanced-30Nuclear Energy ProjectsSelected to ReceiveDepartment

19

12-NIF Dedication: Concluding remarks and video  

SciTech Connect (OSTI)

The National Ignition Facility, the world's largest laser system, was dedicated at a ceremony on May 29, 2009 at Lawrence Livermore National Laboratory. These are the concluding remarks by NIF Director Edward Moses, and a brief video presentation.

Edward Moses

2009-07-02T23:59:59.000Z

20

Remarks by the Acting Secretary of Energy  

Broader source: Energy.gov [DOE]

Remarks by Acting Secretary Daniel B. Poneman concerning the importance of integrated safety management for the protection of workers, the public, and the environment and successfully implementing the Department's missions.

Note: This page contains sample records for the topic "addthis remarks prepared" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Remarks on the cavitation of Thorium-228  

E-Print Network [OSTI]

In this short note we would like to provide some useful remarks on our previous work about the piezonuclear decay of Thorium and in general about the methods and protocols that we used in the experiments on piezonuclear reactions. The purpose of these remarks is to highlight the critical points of the experiments and equipment in order to design future experiments that may obtain positive evidences or that can be as more comparable to previous ones as possible.

F. Cardone; R. Mignani; A. Petrucci

2010-01-31T23:59:59.000Z

22

Deputy Secretary Poneman Delivers Remarks on Nuclear Power at...  

Energy Savers [EERE]

Deputy Secretary Poneman Delivers Remarks on Nuclear Power at Tokyo American Center in Japan Deputy Secretary Poneman Delivers Remarks on Nuclear Power at Tokyo American Center in...

23

Energy Secretary Ernest Moniz's Remarks on Climate Change and...  

Office of Environmental Management (EM)

Energy Secretary Ernest Moniz's Remarks on Climate Change and Resiliency at Columbia University, New York City - As Delivered Energy Secretary Ernest Moniz's Remarks on Climate...

24

Remarks on Liquid Wall Research Mohamed Abdou  

E-Print Network [OSTI]

Remarks on Liquid Wall Research Mohamed Abdou Professor Mechanical and Aerospace Engineering UCLA physicists and engineering scientists · Enhances synergism between IFE and MFE · Provides excellent disciplines. #12;Several "Ideas" Have Been Proposed for Liquid Walls Fluids 1) High-conductivity, low Pr

California at Los Angeles, University of

25

hello, poindexter! THE (UN)REMARKABLE DR. CHARLES LIU  

E-Print Network [OSTI]

hello, poindexter! THE (UN)REMARKABLE DR. CHARLES LIU October 8, 2008 at 12:35 pm · Filed under talk about whatever he thought hello, poindexter! » THE (UN)REMARKABLE DR. CHARLE... http

Liu, Charles

26

Secretary of Energy Ernest Moniz's Remarks at a National Press...  

Office of Environmental Management (EM)

of Energy Ernest Moniz's Remarks at a National Press Club Newsmaker Luncheon in Washington D.C. -- As Delivered Secretary of Energy Ernest Moniz's Remarks at a National Press Club...

27

Hydrology, environment Four remarks on the growth of channel networks  

E-Print Network [OSTI]

Hydrology, environment Four remarks on the growth of channel networks Quatre remarques sur la online xxx Presented by Ghislain de Marsily Keywords: Geomorphology Hydrology River network Mots cle

Kudrolli, Arshad

28

Deputy Secretary Poneman's Remarks at the International Conference...  

Broader source: Energy.gov (indexed) [DOE]

International Conference on Access to Civil Nuclear Energy Deputy Secretary Poneman's Remarks at the International Conference on Access to Civil Nuclear Energy March 8, 2010 -...

29

Introduction Preparation  

E-Print Network [OSTI]

Introduction Motivation Preparation Notos' Components Results Conclusions and Future Work Building Problem Description and Motivation Preparation Notation, Passive DNS trends and Anchor Classes Notos Reputation Results Conclusions and Future Work Special thanks to: Damballa Passive DNS data, Malware and BL

30

Preparing for Hurricane Irene: Follow Local Direction | Department...  

Broader source: Energy.gov (indexed) [DOE]

Local Direction August 25, 2011 - 5:24pm Addthis Coastal watcheswarnings and 5-day forecast cone for storm center of Hurricane Irene, updated on Thursday, Aug. 25, 2011 at 5:00...

31

Page 1 of 4 Prepared Remarks at the American Cancer Society's Press Conference  

E-Print Network [OSTI]

represent the position of the Massachusetts Institute of Technology or the Massachusetts General Hospital. 3 of demand is -0.4, and that, even in the absence of price increases, cigarette consumption will decline responsive to price, the increase in cigarette price anticipated from the Proposed Resolution would

Gabrieli, John

32

Remarks Prepared for Secretary of Energy Samuel Bodman Baku-Tbilisi...  

Broader source: Energy.gov (indexed) [DOE]

and Gentlemen, it is a great pleasure to be with you today to mark the loading of first oil into the Baku-Tbilisi-Ceyhan oil pipeline. This extraordinary project will deliver oil...

33

Secretary Steven Chu Remarks as Prepared for Delivery to the 2011 IAEA  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-Up from the Gridwise Global1WasteRecovery ActResilience andNatural Resources

34

Secretary Steven Chu's Remarks as Prepared for Delivery at the Polytechnic  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-Up from the Gridwise Global1WasteRecovery ActResilience andNatural ResourcesDepartment

35

Secretary Chu's Remarks to the 2011 IAEA General Conference (As Prepared  

Energy Savers [EERE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of Inspector GeneralDepartment of Energyof the Americas | Department ofof Energy Chu to|Department ofoffor

36

Secretary Steven Chu's Remarks as Prepared for Delivery at the Pomona  

Energy Savers [EERE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of Inspector GeneralDepartment of Energyof the Americas | Department ofofDelivered | Department ofAs

37

Secretary Steven Chu's Remarks as Prepared for Delivery to the DOE Tribal  

Energy Savers [EERE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of Inspector GeneralDepartment of Energyof the Americas | Department ofofDelivered | Department ofAsSummit |

38

Remarks As Prepared for Delivery by Secretary of Energy Samuel Bodman  

Office of Environmental Management (EM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of Energy Power.pdf11-161-LNG |September 15,2015 |RebeccaRegionalReliability and Markets Program

39

Remarks Prepared for Secretary of Energy Samuel Bodman Baku-Tbilisi-Ceyhan  

Office of Environmental Management (EM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of Energy Power.pdf11-161-LNG |September 15,2015 |RebeccaRegionalReliability and Markets ProgramPipeline

40

Secretary Chu's Remarks at Vogtle Nuclear Power Plant -- As Prepared for  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administrationcontroller systemsBi (2) Sr (2)ScienceScientistsON THE5,to Visit Pantex

Note: This page contains sample records for the topic "addthis remarks prepared" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Secretary Chu's Remarks at the 2012 IAEA General Conference -- As Prepared  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administrationcontroller systemsBi (2) Sr (2)ScienceScientistsON THE5,to Visit Pantexfor Delivery |

42

Secretary Chu's Remarks at the City Club of Cleveland -- As Prepared for  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administrationcontroller systemsBi (2) Sr (2)ScienceScientistsON THE5,to Visit Pantexfor Delivery

43

TEST - SECRETARY STEVEN CHU'S REMARKS AS PREPARED FOR DELIVERY TO THE DOE TRIBAL SUMMIT  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion |Energy Usage »of Energy StrainClient update resolve008Energy 8 - InDOE Tribal Summit

44

Deputy Secretary Poneman's Remarks as Prepared for Delivery at the American  

Energy Savers [EERE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of Inspector General Office of Audit Services Audit

45

Microsoft Word - Remarks as Prepared for Delivery for Assistant Secretary for Nuclear Energy Dennis R. Spurgeon  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: VegetationEquipment Surfaces andMapping RichlandScatteringWater Vapor Continuum in1 WorkFor ImmediateFOR

46

A Remark About the "Geodesic Principle" in General Relativity  

E-Print Network [OSTI]

A Remark About the "Geodesic Principle" in General Relativity Version 3.0 David B. Malament is the Geodesic Principle: Free massive point particles traverse timelike geodesics. One can think of it as a relativistic version of Newton's first law of motion. It is often claimed that the geodesic principle can

Barrett, Jeffrey A.

47

Remarks on Problem Set 2: Math 201B: Winter, 2011  

E-Print Network [OSTI]

in cylindrical and spherical coordinates. The classic book by G. N. Watson, A Treatise on the Theory of Bessel polynomials are dense in Lp(T). Remarks. · This result follows immediately from the density of C(T) in Lp(T) and the Weierstrass approximation theorem that continuous functions can be approximated continuously by trigonometric

Hunter, John K.

48

Abstracting Preparation  

E-Print Network [OSTI]

Guidelines & Review Manuscript Preparation Submit Your Manuscript Book Reviews Movies & Videos Contact of Biological and Chemical Sciences. Queen Mary, University of London, Mile End Road, London, UK. Abstract Two motive force for energy conversion, providing for metabolism, for active transport, and for synthesis

Allen, John F.

49

RW Prepared  

Office of Legacy Management (LM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment ofDepartment ofofOxford SiteToledo SiteTonawandaUniversity21Prepared by,..~Y-t7 Ii,r

50

Preparing Your  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 - SeptemberMicroneedles for medical point07.06 AgendaPreparation forTrioxide The

51

Remarks on Hamiltonian structures in G{sub 2}-geometry  

SciTech Connect (OSTI)

In this article, we treat G{sub 2}-geometry as a special case of multisymplectic geometry and make a number of remarks regarding Hamiltonian multivector fields and Hamiltonian differential forms on manifolds with an integrable G{sub 2}-structure; in particular, we discuss existence and make a number of identifications of the spaces of Hamiltonian structures associated to the two multisymplectic structures associated to an integrable G{sub 2}-structure. Along the way, we prove some results in multisymplectic geometry that are generalizations of results from symplectic geometry.

Cho, Hyunjoo, E-mail: cho@math.rochester.edu; Salur, Sema, E-mail: salur@math.rochester.edu [Department of Mathematics, University of Rochester, Rochester, New York 14627 (United States)] [Department of Mathematics, University of Rochester, Rochester, New York 14627 (United States); Todd, A. J., E-mail: ajtodd@math.ucr.edu [Department of Mathematics, University of California-Riverside, Riverside, California 92521 (United States)

2013-12-15T23:59:59.000Z

52

Energy Secretary Moniz's Remarks at CSIS in Washington D.C. on...  

Office of Environmental Management (EM)

Energy Secretary Moniz's Remarks at CSIS in Washington D.C. on Energy Security 40 Years after the Embargo - As Delivered Energy Secretary Moniz's Remarks at CSIS in Washington D.C....

53

Deputy Secretary Poneman's Remarks at the Nuclear Energy Assembly - As  

Broader source: Energy.gov (indexed) [DOE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of EnergyEnergyENERGYWomen Ownedof EnergyAdvanced-30Nuclear Energy ProjectsSelected toPreparedPrepared

54

Secretary Chu's Remarks at the Clean Energy Ministerial Opening Session --  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-Up from the Gridwise Global1WasteRecovery Act Fundingfor Delivery |As Prepared for

55

Secretary Moniz's Remarks at the EE Global Forum -- As Delivered |  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-Up from the Gridwise Global1WasteRecovery Act FundingfortheEnergy|PreparedDepartment

56

Deputy Secretary Poneman's Remarks at the FIESP Energy Conference - As  

Broader source: Energy.gov (indexed) [DOE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of EnergyEnergyENERGYWomen Ownedof EnergyAdvanced-30Nuclear Energy ProjectsSelected toPrepared for

57

A function from Diophantine approximations Some remarkable properties of a function defined from consideration of Diophantine approximations  

E-Print Network [OSTI]

remarkable properties similar to those possessed by what physicists call the devil's staircase associated

58

Office Automation Document Preparation  

E-Print Network [OSTI]

.2 Distinctions 1.3 Facilities 1.3.1 Document Preparation 1.3.2 Records Management 1.3.3 Communication 1 organizations contemplating the installation of document-preparation systems. * Administrative managersOffice Automation and Document Preparation for the v' University of North Carolina at Chapel Hill

North Carolina at Chapel Hill, University of

59

Quality Matters: Some Remarks on Internet Service Provisioning and Tariff Design  

E-Print Network [OSTI]

Quality Matters: Some Remarks on Internet Service Provisioning and Tariff Design£ J¨orn AltmannÝ Bj on demand to derive some consequences for Internet service provisioning and tariff design. £This research

Varaiya, Pravin

60

A REMARK ON KAC'S SCATTERING LENGTH FORMULA P. J. FITZSIMMONS, PING HE, JIANGANG YING  

E-Print Network [OSTI]

A REMARK ON KAC'S SCATTERING LENGTH FORMULA P. J. FITZSIMMONS, PING HE, JIANGANG YING Abstract YING discreteness of the spectrum expressed in terms of . The works cited so far concern Brownian

Fitzsimmons, Patrick J.

Note: This page contains sample records for the topic "addthis remarks prepared" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Preparation of acetaldehyde  

DOE Patents [OSTI]

Disclosed is a process for the preparation of acetaldehyde by the hydrogenation of ketene in the presence of a transition metal hydrogenation catalyst.

Tustin, Gerald Charles (Kingsport, TN); Depew, Leslie Sharon (Kingsport, TN)

1997-10-21T23:59:59.000Z

62

Opening Remarks  

Broader source: Energy.gov (indexed) [DOE]

(TEC) Working Group Transportation External Coordination (TEC) Working Group Presented by: Frank Moussa Frank Moussa Office of Logistics Management Office of Logistics Management...

63

Closing Remarks  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-Up fromDepartmentTieCelebrate Earth DayFuelsDepartmentPolicyClean, EERE SmallW

64

Preparing for the Future  

E-Print Network [OSTI]

tx H2O | pg. 12 Preparing for the Future Story by Kathy Wythe Preparing for the Future University establishes water management degree program Texas A&M University launched an interdisci-plinary water management degree programduring the fall... 2005 semester with 12 stu-dents seeking either master?s or doctorate degrees in water management and hydrologic sciences. The degree program, the first in Texas, includes 42 faculty members in 12 departments from four differ- ent colleges, said Ron...

Wythe, Kathy

2006-01-01T23:59:59.000Z

65

Yeast Immunofluorescence Prepare Cells  

E-Print Network [OSTI]

slide. Resuspend in up to 250 µl SPC buffer to prepare up to 5 slides. #12;Prepare Slide: 11. Use clean 15-well slide(s). Start with 25 µl of 2 mg/ml poly-D-lysine (Sigma P-1024) per slide. Pipet on and then off, leaving a thin film on slide well. Hold at room temperature for 1 minute. Wash slide using

Aris, John P.

66

Some Remarks on Cycles in Graphs and Digraphs \\Lambda Martin Loebl  

E-Print Network [OSTI]

Some Remarks on Cycles in Graphs and Digraphs \\Lambda Martin Loebl Department of Applied, Chile mmatamal@dim.uchile.cl Abstract We survey several recent results on cycles of graphs and directed graphs of the following form: 'Does there exist a set of cycles with a property P that generates all

Loebl, Martin

67

REMARKS FOR DEPUTY ADMINISTRATOR LORI GARVER ANNUAL ILAN RAMON INTERNATIONAL SPACE CONFERENCE  

E-Print Network [OSTI]

to be innovative and to work across borders to harness the energies and talents around the world. The U.S. NationalREMARKS FOR DEPUTY ADMINISTRATOR LORI GARVER 6TH ANNUAL ILAN RAMON INTERNATIONAL SPACE CONFERENCE from many countries who have flown on the shuttle and visited the International Space Station are one

68

Monday, March 27th Opening Remarks: Sybille Hellebrand; Paderborn University, Germany  

E-Print Network [OSTI]

Monday, March 27th Opening Remarks: Sybille Hellebrand; Paderborn University, Germany 18 Hellebrand; Paderborn University, Germany Fault Model Driven Functional Test for PowerPC Microprocessor Processor Christian Zöllin; Stuttgart University, Germany Testability Features of a 45nm Processor Design

Hellebrand, Sybille

69

Remarks on Nondeterminism ffl Interesting Nondeterministic TM. A composite number is the  

E-Print Network [OSTI]

Remarks on Nondeterminism ffl Interesting Nondeterministic TM. A composite number is the product of two natural numbers which are greater than one. That is, a composite number is a non­prime other than 1 or 0. Let C denote the set of composite numbers, and set L = f\\Lambda n : n 2 Cg. If restricted

Bringsjord, Selmer

70

Some Remarks on Applied Mathematics and the Imaging of the Brain  

E-Print Network [OSTI]

Some Remarks on Applied Mathematics and the Imaging of the Brain A.S. Fokas Department of Applied. In this note I will use brain imaging as an example of the usefullness of mathematics, and I will use-ray computerized tomography (CT), imaging studies provided only indi- rect visualization of the brain

Fokas, A. S.

71

Remarks by Secretary of Energy Spencer Abraham Luncheon Address to the Keidanren  

E-Print Network [OSTI]

in my job as Secretary is look beyond our borders to examine the energy needs and challengesRemarks by Secretary of Energy Spencer Abraham Luncheon Address to the Keidanren January 9, 2004, and I look forward to a continuation of our fruitful partnership on international energy security issues

72

Opening Remarks by George W. Arnold, National Coordinator for Smart Grid Interoperability  

E-Print Network [OSTI]

Opening Remarks by George W. Arnold, National Coordinator for Smart Grid Interoperability Conference on Smart Grid Interoperability Standards January 31, 2011 Introduction Chairman Wellinghoff the opportunity to escribe NIST's and our partners efforts to develop standards for an interoperable d smart grid

Magee, Joseph W.

73

A REMARK ON BMW ALGEBRA, q-SCHUR ALGEBRAS AND CATEGORIFICATION PEDRO VAZ AND EMMANUEL WAGNER  

E-Print Network [OSTI]

A REMARK ON BMW ALGEBRA, q-SCHUR ALGEBRAS AND CATEGORIFICATION PEDRO VAZ AND EMMANUEL WAGNER ABSTRACT. We prove that the 2-variable BMW algebra embeds into an algebra constructed from the HOMFLY-PT polynomial. We also prove that the so2N -BMW algebra embeds in the q-Schur algebra of type A. We use

Herrmann, Samuel

74

Review: Preparing for Climate Change  

E-Print Network [OSTI]

Review: Preparing for Climate Change By Michael D.Stephen, Preparing for Climate Change. A Boston Review Book.alkaline paper. Climate change is inevitable, but disaster

Kunnas, Jan

2013-01-01T23:59:59.000Z

75

Opening Remarks from the Joint Genome Institute and Argonne Lab High Performance Computing Workshop (2010 JGI/ANL HPC Workshop)  

ScienceCinema (OSTI)

DOE JGI Director Eddy Rubin gives opening remarks at the JGI/Argonne High Performance Computing (HPC) Workshop on January 25, 2010.

Rubin, Eddy

2011-06-03T23:59:59.000Z

76

Opening Remarks from the Joint Genome Institute and Argonne Lab High Performance Computing Workshop (2010 JGI/ANL HPC Workshop)  

SciTech Connect (OSTI)

DOE JGI Director Eddy Rubin gives opening remarks at the JGI/Argonne High Performance Computing (HPC) Workshop on January 25, 2010.

Rubin, Eddy

2010-01-25T23:59:59.000Z

77

Preparation of vinyl acetate  

DOE Patents [OSTI]

This invention pertains to the preparation of vinyl acetate by contacting a mixture of hydrogen and ketene with a heterogeneous catalyst containing a transition metal to produce acetaldehyde, which is then reacted with ketene in the presence of an acid catalyst to produce vinyl acetate.

Tustin, Gerald Charles (Kingsport, TN); Zoeller, Joseph Robert (Kingsport, TN); Depew, Leslie Sharon (Kingsport, TN)

1998-01-01T23:59:59.000Z

78

Preparation of vinyl acetate  

DOE Patents [OSTI]

This invention pertains to the preparation of vinyl acetate by contacting a mixture of hydrogen and ketene with a heterogeneous catalyst containing a transition metal to produce acetaldehyde, which is then reacted with ketene in the presence of an acid catalyst to produce vinyl acetate.

Tustin, G.C.; Zoeller, J.R.; Depew, L.S.

1998-03-24T23:59:59.000Z

79

CAREER FAIR PREPARATION &  

E-Print Network [OSTI]

, NJ #12;BEFORE THE CAREER FAIR · Prepare A Resume Create a resume using the "RBS Undergraduate New Brunswick Student Handbook" as a guide Have your resume reviewed by a Career Counselor Upload resume to Symplicity - RBS Undergraduate Office New Brunswick's career portal system Print plenty copies of your resume

Lin, Xiaodong

80

Lienard-Wiechert potentials for charged tachyons and several remarks on the tachyon Cherenkov radiation  

E-Print Network [OSTI]

The Lienard-Wiechert potentials for charged tachyons are deduced in this note. They turn out to be twice as large as compared to the corresponding potentials for ordinary particles. Several remarks are made on tachyon Cherenkov radiation and its intensity. In particular, it follows in a straightforward way from the derivation of the Lienard-Wiechert potentials that the tachyon Cherenkov radiation angle obeys the same formula as that for ordinary particles.

Perepelitsa, V F

2015-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "addthis remarks prepared" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Lienard-Wiechert potentials for charged tachyons and several remarks on the tachyon Cherenkov radiation  

E-Print Network [OSTI]

The Lienard-Wiechert potentials for charged tachyons are deduced in this note. They turn out to be twice as large as compared to the corresponding potentials for ordinary particles. Several remarks are made on tachyon Cherenkov radiation and its intensity. In particular, it follows in a straightforward way from the derivation of the Lienard-Wiechert potentials that the tachyon Cherenkov radiation angle obeys the same formula as that for ordinary particles.

V. F. Perepelitsa

2015-02-23T23:59:59.000Z

82

Remarks Concerning the Public Utility Commission of Texas Study on Bulk Power Transmission  

E-Print Network [OSTI]

REMARKS CONCERNING THE PUBLIC UTILITY COMMISSION OF TEXAS STUDY ON BULK POWER TRANSMISSION R. T. SWEATMAN Executive Director Electric Reliability Council of Texas The citizens of Texas need reliable electric service. Our economy, our way... amounts of transmission capacity must alwavs be available in the event generation is lost in one area, so that the other utility's power can be transmitted to the utility in need. A pipeline system can suffer equipment outages easily, without loss...

Sweatman, R. T.

83

REMARKS ON THE MAXIMUM ENTROPY METHOD APPLIED TO FINITE TEMPERATURE LATTICE QCD.  

SciTech Connect (OSTI)

We make remarks on the Maximum Entropy Method (MEM) for studies of the spectral function of hadronic correlators in finite temperature lattice QCD. We discuss the virtues and subtlety of MEM in the cases that one does not have enough number of data points such as at finite temperature. Taking these points into account, we suggest several tests which one should examine to keep the reliability for the results, and also apply them using mock and lattice QCD data.

UMEDA, T.; MATSUFURU, H.

2005-07-25T23:59:59.000Z

84

Remarks on the Maximum Entropy Method applied to finite temperature lattice QCD  

E-Print Network [OSTI]

We make remarks on the Maximum Entropy Method (MEM) for studies of the spectral function of hadronic correlators in finite temperature lattice QCD. We discuss the virtues and subtlety of MEM in the cases that one does not have enough number of data points such as at finite temperature. Taking these points into account, we suggest several tests which one should examine to keep the reliability for the results, and also apply them using mock and lattice QCD data.

Takashi Umeda; Hideo Matsufuru

2005-10-05T23:59:59.000Z

85

Grid Transfer Remark 4.1 Contents of this chapter. Consider a grid with grid size h and the  

E-Print Network [OSTI]

Chapter 4 Grid Transfer Remark 4.1 Contents of this chapter. Consider a grid with grid size h that there might be an iterative method for solving this system efficiently, which uses also coarser grids way between the grids. 2 4.1 The Coarse Grid System and the Residual Equa- tion Remark 4.2 Basic idea

John, Volker

86

Secretary Chu and the 'Sputnik Moment' | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

'Sputnik Moment' Addthis Description U.S. Secretary of Energy Steven Chu speaks about China and the Sputnik Moment in US energy Policy at the National Press Club. Remarks...

87

New DOE-NASCAR Partnership Revs Deployment of Pollution Reducing...  

Energy Savers [EERE]

- 4:44pm Addthis Dr. Michael Knotek, Deputy Undersecretary for Science and Energy at the Energy Department, delivers remarks at the NASCAR Green Summit in Chicago, where the...

88

TORIS Data Preparation Guidelines  

SciTech Connect (OSTI)

The objective of this manual is to present guidelines and procedures for the preparation of new data for the Tertiary Oil Recovery Information System (TORIS) data base. TORIS is an analytical system currently maintained by the Department of Energy's (DOE) Bartlesville Project Office. It uses an extensive field- and reservoir-level data base to evaluate the technical and economic recovery potential of specific crude oil reservoirs.

Guinn, H.; Remson, D.

1999-03-11T23:59:59.000Z

89

Preparing for the Unexpected  

E-Print Network [OSTI]

for leaks before continuing service. Inventory ? Account for all livestock, fuels, chemicals, machinery and equipment. Compare this list to the inventory prepared before the incident. 1#24; ? Note any lost livestock, and report to emergency response... the crisis and rely on the public to follow instructions and react quickly. To know exactly what to do if a disaster occurs, you will need to monitor TV, radio or on-line news reports for official news. The health department, county emergency management...

Harris, Janie; Norman, Lisa; Lesikar, Bruce J.; Smith, David

2007-03-26T23:59:59.000Z

90

Thermal oxidation procedure PREPARATION........................................................................................................................................... 2  

E-Print Network [OSTI]

procedure - 2 - Preparation. The preparation procedure sets up the power, gas supplies, cooling water, (DI to check all the supplies. Cooling water Gas supplies Routing DI water for wet oxidation We start........................................................................................................................................... 2 Step 1 Turn on the cooling water

Hochberg, Michael

91

Some remarks on the use of effective Lagrangians in QED and QCD  

E-Print Network [OSTI]

We discuss in this article the usefulness of the effective Lagrangians (L_eff) of QED and QCD within the one-loop approximation. Instead of calculating L_eff via complicated computations with Schwinger's proper-time technique or Feynman graphs, we prefer to employ the energy-momentum tensor and the leading-log model. The advantage is that we do not have to demand the external electromagnetic or color field to be constant. There are also some critical remarks added which cast doubt on the use of LQCD with covariant constant fields in explaining the nature of the QCD vacuum.

Dittrich, Walter

2015-01-01T23:59:59.000Z

92

Some remarks on the use of effective Lagrangians in QED and QCD  

E-Print Network [OSTI]

We discuss in this article the usefulness of the effective Lagrangians (L_eff) of QED and QCD within the one-loop approximation. Instead of calculating L_eff via complicated computations with Schwinger's proper-time technique or Feynman graphs, we prefer to employ the energy-momentum tensor and the leading-log model. The advantage is that we do not have to demand the external electromagnetic or color field to be constant. There are also some critical remarks added which cast doubt on the use of LQCD with covariant constant fields in explaining the nature of the QCD vacuum.

Walter Dittrich

2015-01-29T23:59:59.000Z

93

State of the Union Remarks on Energy in Four Charts | Department of Energy  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administrationcontroller systemsBiSiteNeutron Scattering4 ByWatchingState of the Union Remarks on

94

Surface preparation and plating  

SciTech Connect (OSTI)

This chapter covers electroplating and electroless nickel plating since coatings of this type play an important role in diamond turning technology. Items to be discussed include preparation of substrates prior to coating, plating defects such as pits and nodules and their influence on optics, the influence of stress in coatings, plating details for copper, gold, silver, and electroless nickel, and the importance of additives and their influence on grain size and structure of deposits. Some comments are made on future challenges that could be presented to the plating community to further improve the quality of coatings applied for diamond turning purposes. 60 references, 8 figures, 9 tables.

Dini, J.W.; Waldrop, F.B.; Reno, R.W.

1982-10-06T23:59:59.000Z

95

Introduction to Metagenomics at DOE JGI (Opening Remarks for the Metagenomics Informatics Challenges Workshop: 10K Genomes at a Time)  

ScienceCinema (OSTI)

After a quick introduction by DOE JGI Director Eddy Rubin, DOE JGI's Nikos Kyrpides delivers the opening remarks at the Metagenomics Informatics Challenges Workshop held at the DOE JGI on October 12-13, 2011

Kyrpides, Nikos [DOE JGI

2013-01-22T23:59:59.000Z

96

Concluding Remarks In this work, we have explored in depth many types of radioactive contamination that are  

E-Print Network [OSTI]

Concluding Remarks In this work, we have explored in depth many types of radioactive contamination as radiopurity testing facilities, capable of measuring the radioactivity levels of materials to be used

97

ADMINISTRATIVE RECORDS SCHEDULE 5: BUDGET PREPARATION, PRESENTATION...  

Broader source: Energy.gov (indexed) [DOE]

5: BUDGET PREPARATION, PRESENTATION, AND APPORTIONMENT RECORDS ADMINISTRATIVE RECORDS SCHEDULE 5: BUDGET PREPARATION, PRESENTATION, AND APPORTIONMENT RECORDS Budget and...

98

ADMINISTRATIVE RECORDS SCHEDULE 5: BUDGET PREPARATION, PRESENTATION...  

Broader source: Energy.gov (indexed) [DOE]

5: BUDGET PREPARATION, PRESENTATION, AND APPORTIONMENT ADMINISTRATIVE RECORDS SCHEDULE 5: BUDGET PREPARATION, PRESENTATION, AND APPORTIONMENT Budget and apportionment records...

99

Process for preparing liquid wastes  

DOE Patents [OSTI]

A process for preparing radioactive and other hazardous liquid wastes for treatment by the method of vitrification or melting is provided for.

Oden, Laurance L. (Albany, OR); Turner, Paul C. (Albany, OR); O'Connor, William K. (Lebanon, OR); Hansen, Jeffrey S. (Corvallis, OR)

1997-01-01T23:59:59.000Z

100

CIP Preparation Course Summer 2008  

E-Print Network [OSTI]

CIP Preparation Course Summer 2008 Project Lead: Susan Rose, Ph.D. Office for the Protection, and support needed to prepare for and successfully pass the Certified IRB Professional (CIP) examination, State Law (Marlene) Week 9 (8/11/08) *Pre-post practice test, Q&A, CIP Discussion, Test Strategies

Biederman, Irving

Note: This page contains sample records for the topic "addthis remarks prepared" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Atoms in Flight: The Remarkable Connections between Atomic and Hadronic Physics  

SciTech Connect (OSTI)

Atomic physics and hadron physics are both based on Yang Mills gauge theory; in fact, quantum electrodynamics can be regarded as the zero-color limit of quantum chromodynamics. I review a number of areas where the techniques of atomic physics provide important insight into the theory of hadrons in QCD. For example, the Dirac-Coulomb equation, which predicts the spectroscopy and structure of hydrogenic atoms, has an analog in hadron physics in the form of light-front relativistic equations of motion which give a remarkable first approximation to the spectroscopy, dynamics, and structure of light hadrons. The renormalization scale for the running coupling, which is unambiguously set in QED, leads to a method for setting the renormalization scale in QCD. The production of atoms in flight provides a method for computing the formation of hadrons at the amplitude level. Conversely, many techniques which have been developed for hadron physics, such as scaling laws, evolution equations, and light-front quantization have equal utility for atomic physics, especially in the relativistic domain. I also present a new perspective for understanding the contributions to the cosmological constant from QED and QCD.

Brodsky, Stanley J.; /SLAC

2012-02-16T23:59:59.000Z

102

Welcome Remarks and Introduction from the DOE Under Secretary for Science, Steve Koonin (2011 EFRC Summit)  

ScienceCinema (OSTI)

In this video the DOE Under Secretary for Science, Steve Koonin, opened the 2011 EFRC Summit and Forum with welcoming remarks and an introduction of the keynote address. The 2011 EFRC Summit and Forum brought together the EFRC community and science and policy leaders from universities, national laboratories, industry and government to discuss "Science for our Nation's Energy Future." In August 2009, the Office of Science established 46 Energy Frontier Research Centers. The EFRCs are collaborative research efforts intended to accelerate high-risk, high-reward fundamental research, the scientific basis for transformative energy technologies of the future. These Centers involve universities, national laboratories, nonprofit organizations, and for-profit firms, singly or in partnerships, selected by scientific peer review. They are funded at $2 to $5 million per year for a total planned DOE commitment of $777 million over the initial five-year award period, pending Congressional appropriations. These integrated, multi-investigator Centers are conducting fundamental research focusing on one or more of several ?grand challenges? and use-inspired ?basic research needs? recently identified in major strategic planning efforts by the scientific community. The purpose of the EFRCs is to integrate the talents and expertise of leading scientists in a setting designed to accelerate research that transforms the future of energy and the environment.

Koonin, Steve

2012-03-14T23:59:59.000Z

103

1:17 p.m. August 25, 2012 [Macdonald] Remarks on Macdonald's book on p-adic spherical functions  

E-Print Network [OSTI]

1:17 p.m. August 25, 2012 [Macdonald] Remarks on Macdonald's book on p-adic spherical functions Bill Casselman University of British Columbia cass@math.ubc.ca When Ian Macdonald's book Spherical of some of Macdonald's themes I shall necessarily restrict myself only to things closely related to them

Casselman, William

104

What a remarkable species to be so obsessed with the absence of something. I came to this  

E-Print Network [OSTI]

What a remarkable species ­ to be so obsessed with the absence of something. I came found myself saying something like, "No, no Professor, you've got them wrong ­ it's the perception of space that's largely ventral...". But what did I actually mean by "perception of space"? Did I mean

Aberdeen, University of

105

9:30 am-Welcome reception, snacks & refreshments! 10:00 am-Opening remarks, Eric Triplett!  

E-Print Network [OSTI]

-2 for direct bioconversion of methyglucurono-arabinoxylan from sorghum to biofuels and chemicals. Eric Triplett)! ! 2:15 pm- Deepika Awasthi - Engineering Bacillus subtilis for the production of D the missing pieces! 11:15 am- Closing remarks! 11:20 am- Dr. Jamie Foster - Grant writing workshop! 12:20 pm

Watson, Craig A.

106

A REMARK ON THE HOMOTOPY EQUIVALENCE Abstract. Being a maximal compact subgroup of SLn C, SUn is  

E-Print Network [OSTI]

A REMARK ON THE HOMOTOPY EQUIVALENCE SUn SLn C JUAN SOUTO Abstract. Being a maximal compact subgroup of SLn C, SUn is a deformation retract of the former group. In this note we prove that, for sufficiently large n, there is no retraction of SLn C to SUn which preserves commutativity. 1. Introduction

Souto, Juan

107

Preparing for Transfer Biological Engineering  

E-Print Network [OSTI]

Environmental Engineering Game Design Industrial Systems & Information Technology Information Science MaterialsPreparing for Transfer Majors: Biological Engineering Chemical Engineering Civil Engineering Computer Science Electrical & Computer Engineering Engineering Physics Environmental Engineering

Walter, M.Todd

108

Secretary Moniz's Remarks at the 2014 White House Solar Summit | Department  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-Up from the Gridwise Global1WasteRecovery Act FundingfortheEnergy|Prepared forof

109

Microsoft Word - Department of Energy QER Remarks Tom King FINAL.docx  

Energy Savers [EERE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of Inspector General Office0-72.pdfGeorgeDoesn't32 Master EMAZ AUTOMOTIVECR-091MEMORANDUM To:InspectionsPrepared

110

Preparation, Characterization, and Catalytic Properties of Tungsten...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Preparation, Characterization, and Catalytic Properties of Tungsten Trioxide Cyclic Trimers on FeO(111)Pt(111). Preparation, Characterization, and Catalytic Properties of Tungsten...

111

Business Owners: Prepare for Utility Disruptions | Department...  

Broader source: Energy.gov (indexed) [DOE]

Utility Disruptions Business Owners: Prepare for Utility Disruptions Business Owners: Prepare for Utility Disruptions Have a plan in place in case a natural disaster or other...

112

PREPARED BY: Regional Freight Data  

E-Print Network [OSTI]

.5% Truck, ocean, rail, air Milled grain products and preparations and bakery products 3.3% Truck, rail instruments and apparatus 3.1% Truck, air Printed products 2.9% Truck, rail, air Nonmetallic mineral products for 60% of Oregon jobs · Transportation and logistics account for 20-25% of product cost · Average

Bertini, Robert L.

113

prepared at INRIA Sophia Antipolis  

E-Print Network [OSTI]

PhD THESIS prepared at INRIA Sophia Antipolis and presented at the University of Nice-Sophia Maxime DESCOTEAUX Adviser Rachid Deriche INRIA Sophia Antipolis, France Reviewers Peter Basser NICHD, USA Ayache INRIA Sophia Antipolis, France Habib Benali INSERM / Pitié-Salpêtrière, France Denis Le Bihan

Paris-Sud XI, Université de

114

prepared at INRIA Sophia Antipolis  

E-Print Network [OSTI]

PhD THESIS prepared at INRIA Sophia Antipolis and presented at the University of Nice-Sophia Wassermann Advisor Dr. Rachid Deriche INRIA Sophia-Antipolis, France Reviewers Dr. Cyril Poupon CEA Neuro l' INRIA Sophia Antipolis et present´ee ´a l' Universit´e de Nice-Sophia Antipolis ´Ecole Doctorale

Paris-Sud XI, Université de

115

prepared at INRIA Sophia Antipolis  

E-Print Network [OSTI]

PhD THESIS prepared at INRIA Sophia Antipolis and presented at the University of Nice-Sophia Sophia Antipolis, France Pr. Val´erie Perrier University of Grenoble, France Dr. Fabrice Wallois;UNIVERSIT ´E NICE-SOPHIA ANTIPOLIS - UFR Sciences ´Ecole Doctorale STIC (Sciences et Technologies de l

Paris-Sud XI, Université de

116

prepared at INRIA Sophia Antipolis  

E-Print Network [OSTI]

PhD THESIS prepared at INRIA Sophia Antipolis and presented at the University of Nice-Sophia Voronoi Diagrams and Applications Camille WORMSER Advisors Pr. Jean-Daniel Boissonnat INRIA Sophia Antipolis, France Pr. Mariette Yvinec INRIA Sophia Antipolis, France Reviewers Pr. Aurenhammer Technische

Paris-Sud XI, Université de

117

prepared at INRIA Sophia Antipolis  

E-Print Network [OSTI]

PhD THESIS prepared at INRIA Sophia Antipolis and presented at the University of Nice-Sophia NUNDLOLL Defense date: 30 March 2010. Jury Members Jean Luc GOUZ? INRIA Sophia Antipolis, France Advisor Frédéric GROGNARD INRIA Sophia Antipolis, France Co-advisor Ludovic MAILLERET INRA Sophia Antipolis, France

Paris-Sud XI, Université de

118

prepared at INRIA Sophia Antipolis  

E-Print Network [OSTI]

PhD THESIS prepared at INRIA Sophia Antipolis and presented at the University of Nice-Sophia Pr. Rachid Deriche INRIA Sophia Antipolis, France Pr. Olivier Faugeras INRIA Sophia Antipolis, France-Fredrik Westin Harvard University, USA Examiners Pr. Nicholas Ayache INRIA Sophia Antipolis, France Dr. Maher

Paris-Sud XI, Université de

119

Safety Manual Prepared by the  

E-Print Network [OSTI]

IMS Safety Manual Prepared by the IMS Safety Committee January 1991 (revised 1/2009) Institute 2 Introduction 3 IMS Laboratory Safety Reporting Policy 4 IMS Safety Committee 5 Fire Safety and Emergency Procedures 6 First Aid and Emergency Response 8 General Laboratory Safety 10 Chemical Spills

Alpay, S. Pamir

120

Preparation of gas selective membranes  

DOE Patents [OSTI]

Gas separation membranes which possess improved characteristics as exemplified by selectivity and flux may be prepared by coating a porous organic polymer support with a solution or emulsion of a plasticizer and an organic polymer, said coating being effected at subatmospheric pressures in order to increase the penetration depth of the coating material.

Kulprathipanja, S.; Kulkarni, S.S.; Funk, E.W.

1988-06-14T23:59:59.000Z

Note: This page contains sample records for the topic "addthis remarks prepared" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Preparation of gas selective membranes  

DOE Patents [OSTI]

Gas separation membranes which possess improved characteristics as exemplified by selectivity and flux may be prepared by coating a porous organic polymer support with a solution or emulsion of a plasticizer and an organic polymer, said coating being effected at subatmospheric pressures in order to increase the penetration depth of the coating material.

Kulprathipanja, Santi (Hoffman Estates, IL); Kulkarni, Sudhir S. (Hoffman Estates, IL); Funk, Edward W. (Highland Park, IL)

1988-01-01T23:59:59.000Z

122

Arduino Sustainability Project Prepared for  

E-Print Network [OSTI]

Arduino Sustainability Project Prepared for: Dr. Pushkin Kachroo EE 290 UNLV Christian Calvo 2009 by the Arduino microcontroller to satisfy the theme of sustainability. The device I decided to construct is determined by the LDR. The LDR output signal is fed into an analog input of the Arduino. The value is read

Kachroo, Pushkin

123

Preparation of asymmetric porous materials  

DOE Patents [OSTI]

A method for preparing an asymmetric porous material by depositing a porous material film on a flexible substrate, and applying an anisotropic stress to the porous media on the flexible substrate, where the anisotropic stress results from a stress such as an applied mechanical force, a thermal gradient, and an applied voltage, to form an asymmetric porous material.

Coker, Eric N. (Albuquerque, NM)

2012-08-07T23:59:59.000Z

124

RECYCLING RATE STUDY Prepared by  

E-Print Network [OSTI]

NATIONAL RECYCLING RATE STUDY Prepared by: Smith, Bucklin and Associates, Inc. Market Research and Statistics Division Chicago, Illinois July 2003 PRINTED ON RECYCLED PAPER #12;BCI RECYCLING RATE STUDY TABLE ....................................................................................................1 II. METHODOLOGY A. Total Pounds of Lead Recycled from Batteries

Laughlin, Robert B.

125

preparation  

E-Print Network [OSTI]

Uranium can be removed from groundwater by adding an electron donor to the subsurface that stimulates growth of native bacteria, generating conditions that result in precipitation of uranium. The long-term efficacy of this technology is unproven. Numerical modeling results for uranium bioremediation in a shallow, alluvial aquifer are provided to establish a broad framework for understanding processes associated with bioremediation of uranium and to bound conditions under which bioremediation could succeed in the long-term and conditions under which it is likely to fail. The models are benchmarked against experiments conducted at the Rifle, Colorado site. Sensitivity analysis of model parameters were conducted, examining: alternatives to the acetate electron donor (lactate and ethanol), oxygen and nitrate terminal electron acceptors, multiphase flow, density and gas entrapment processes, and hypothetical flood events. Sensitivity of simulated aqueous U(VI) concentrations to process model parameters suggest that groundwater flow rate, uranium bioreduction rate, and sulfate bioreduction parameters exert the most impact on bioremediation effectiveness. The simulated scenarios are used to assess potential performance issues for site conditions and other bioremediation approaches.

Bioremediation Of Uranium In; Shallow Alluvial Aquifers; Shallow Alluvial Aquifers; S. B. Yabusaki; Y. Fang; S. R. Waichler; P. E. Long

126

Prepared  

E-Print Network [OSTI]

The demand for energy continues to grow in North America. Canada plays a key role in balancing the demand and supply requirements. As the conventional oil reserves are declining in the world, there will be an ever-growing need for exploring the oil resources at remote locations including the vast oil sands deposits in the Athabasca region of northern Alberta and deep water. This paper will present an overview of Canadas conventional oil, oil sands and offshore industry, with primary focus on current production levels, future production forecasts, pipeline issues, and current and potential markets. BUEC 663: NRE Capstone-Group Project

Kaleem Shakir; Mohammed Riaz; Jacob Oommachan

127

Preparation of superconductor precursor powders  

DOE Patents [OSTI]

A process for the preparation of a precursor metallic powder composition for use in the subsequent formation of a superconductor. The process comprises the steps of providing an electrodeposition bath comprising an electrolyte medium and a cathode substrate electrode, and providing to the bath one or more soluble salts of one or more respective metals which are capable of exhibiting superconductor properties upon subsequent appropriate treatment. The bath is continually energized to cause the metallic and/or reduced particles formed at the electrode to drop as a powder from the electrode into the bath, and this powder, which is a precursor powder for superconductor production, is recovered from the bath for subsequent treatment. The process permits direct inclusion of all metals in the preparation of the precursor powder, and yields an amorphous product mixed on an atomic scale to thereby impart inherent high reactivity. Superconductors which can be formed from the precursor powder include pellet and powder-in-tube products.

Bhattacharya, Raghunath (Littleton, CO)

1998-01-01T23:59:59.000Z

128

Method for preparing ceramic composite  

DOE Patents [OSTI]

A process is disclosed for preparing ceramic composite comprising blending TiC particulates, Al{sub 2}O{sub 3} particulates and nickel aluminide and consolidating the mixture at a temperature and pressure sufficient to produce a densified ceramic composite having fracture toughness equal to or greater than 7 MPa m{sup 1/2}, a hardness equal to or greater than 18 GPa. 5 figs.

Alexander, K.B.; Tiegs, T.N.; Becher, P.F.; Waters, S.B.

1996-01-09T23:59:59.000Z

129

Method for preparing ceramic composite  

DOE Patents [OSTI]

A process for preparing ceramic composite comprising blending TiC particulates, Al.sub.2 O.sub.3 particulates and nickle aluminide and consolidating the mixture at a temperature and pressure sufficient to produce a densified ceramic composite having fracture toughness equal to or greater than 7 MPa m.sup.1/2, a hardness equal to or greater than 18 GPa.

Alexander, Kathleen B. (Oak Ridge, TN); Tiegs, Terry N. (Lenoir City, TN); Becher, Paul F. (Oak Ridge, TN); Waters, Shirley B. (Knoxville, TN)

1996-01-01T23:59:59.000Z

130

The preparation of phosphine tellurides  

E-Print Network [OSTI]

THE PREPARATION OF PHOSPHINE TELLURIDES A Thesis Brian Howard Steeves Submitted to the Graduate C o lie ge of the Texas A@M University in partial fulfillment of the requirements for the degree of MASTER OF SCIENCE January 1965 Major Subject...: Chemistry THE PRKPARATLGN GF PHGSPHINE TELLUREDKS Brian Howard Steeves Approved as to style and content by: (Chairman of Com itte ) (Member) (Head of Dep r nt) (Member (Member) (Mem r) January 1965 ACKNOWLEDGMENT I would like to express my sincere...

Steeves, Brian Howard

2012-06-07T23:59:59.000Z

131

Preparation of high purity vanadium  

SciTech Connect (OSTI)

The paper reviews the various reduction and refining methods that have been used to prepare vanadium metal. Earlier work on metallothermic and carbothermic reduction processes is discussed. Recent work on improving the scaling up the aluminothermic reduction process is described in detail. Iron and silicon are first removed from commercial V/sub 2/O/sub 5/ by an ion exchange separation technique and the purified oxide is then exothermically reduced with aluminum metal. The resulting V-Al ingot is heated in a vacuum to 1700/sup 0/C to remove the aluminum and dissolved oxygen, and the sponge is then electron-beam melted to remove residual volatile impurities to yield vanadium metal of 99.98% purity. Precautions taken during each processing stage to minimize carbon, nitrogen and oxygen contamination are described. Metal containing < 50 ppmw each of C, N and O, < 20 ppmw Si, and < 10 ppmw of Fe and Al has been prepared in kilogram quantities by this method. The hardness of the beam melted is 60 to 70 DPH. Experiments designed to scale up the reduction process and to increase the efficiency of the separation and melting steps are described. Various refining techniques that have been applied to the preparation of high purity vanadium are described and comparisons made between the quality of metal obtained by each.

Carlson, O.N.; Burkholder, H.R.; Martsching, G.A.; Schmidt, F.A.

1981-01-01T23:59:59.000Z

132

Stormwater Pollution Prevention Plan Prepared by  

E-Print Network [OSTI]

Stormwater Pollution Prevention Plan Prepared by: Environment, Health, Safety, and Security .....................................................16 3.0 Potential Sources of Pollution

Eisen, Michael

133

A REMARKABLE LONG-TERM LIGHT CURVE AND DEEP, LOW-STATE SPECTROSCOPY: SWIFT AND XMM-NEWTON MONITORING OF THE NLS1 GALAXY Mkn 335  

E-Print Network [OSTI]

The narrow-line Seyfert 1 galaxy (NLS1) Mkn 335 is remarkable because it has repeatedly shown deep, long X-ray low states that show pronounced spectral structure. It has become one of the prototype active galactic nuclei ...

Grupe, Dirk

134

PREPARED FOR: The National Renewable Energy Laboratory  

E-Print Network [OSTI]

Wind and solar integration study May 2010 Prepared for NREL by GE Energy 1 River Road Schenectady, New York 12345PREPARED FOR: The National Renewable Energy Laboratory A national laboratory of the U.S. Department of Energy PREPARED BY: GE Energy MAY 2010 WESTERNWIND AND SOLAR INTEGRATION STUDY #12;#12;Western

135

Chapter 6 List of Preparers  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-Up fromDepartmentTieCelebrate Earth Day with SecretaryDerivedof&6. LIST OF PREPARERS

136

Preparation of superconductor precursor powders  

DOE Patents [OSTI]

A process for the preparation of a precursor metallic powder composition for use in the subsequent formation of a superconductor. The process comprises the steps of providing an electrodeposition bath comprising an electrolyte medium and a cathode substrate electrode, and providing to the bath one or more soluble salts of one or more respective metals which are capable of exhibiting superconductor properties upon subsequent appropriate treatment. The bath is continually energized to cause the metallic and/or reduced particles formed at the electrode to drop as a powder from the electrode into the bath, and this powder, which is a precursor powder for superconductor production, is recovered from the bath for subsequent treatment. The process permits direct inclusion of all metals in the preparation of the precursor powder, and yields an amorphous product mixed on an atomic scale to thereby impart inherent high reactivity. Superconductors which can be formed from the precursor powder include pellet and powder-in-tube products. 7 figs.

Bhattacharya, R.

1998-08-04T23:59:59.000Z

137

Preparation of superconductor precursor powders  

DOE Patents [OSTI]

A process for the preparation of a precursor metallic powder composition for use in the subsequent formation of a superconductor. The process comprises the steps of providing an electrodeposition bath comprising an electrolyte medium and a cathode substrate electrode, and providing to the bath one or more soluble salts of one or more respective metals, such as nitrate salts of thallium, barium, calcium, and copper, which are capable of exhibiting superconductor properties upon subsequent appropriate treatment. The bath is continually energized to cause the metallic particles formed at the electrode to drop as a powder from the electrode into the bath, and this powder, which is a precursor powder for superconductor production, is recovered from the bath for subsequent treatment. The process permits direct inclusion of thallium in the preparation of the precursor powder, and yields an amorphous product mixed on an atomic scale to thereby impart inherent high reactivity. Superconductors which can be formed from the precursor powder include pellet and powder-in-tube products.

Bhattacharya, Raghunath (Littleton, CO); Blaugher, Richard D. (Evergreen, CO)

1995-01-01T23:59:59.000Z

138

Preparation of hydrophobic organic aeorgels  

DOE Patents [OSTI]

Synthetic methods for the preparation of hydrophobic organics aerogels. One method involves the sol-gel polymerization of 1,3-dimethoxybenzene or 1,3,5-trimethoxybenzene with formaldehyde in non-aqueous solvents. Using a procedure analogous to the preparation of resorcinol-formaldehyde (RF) aerogels, this approach generates wet gels that can be dried using either supercritical solvent extraction to generate the new organic aerogels or air dried to produce an xerogel. Other methods involve the sol-gel polymerization of 1,3,5 trihydroxy benzene (phloroglucinol) or 1,3 dihydroxy benzene (resorcinol) and various aldehydes in non-aqueous solvents. These methods use a procedure analogous to the one-step base and two-step base/acid catalyzed polycondensation of phloroglucinol and formaldehyde, but the base catalyst used is triethylamine. These methods can be applied to a variety of other sol-gel precursors and solvent systems. These hydrophobic organics aerogels have numerous application potentials in the field of material absorbers and water-proof insulation.

Baumann, Theodore F. (Tracy, CA); Satcher, Jr., Joe H. (Patterson, CA); Gash, Alexander E. (Livermore, CA)

2007-11-06T23:59:59.000Z

139

Preparation of hydrophobic organic aeorgels  

DOE Patents [OSTI]

Synthetic methods for the preparation of hydrophobic organics aerogels. One method involves the sol-gel polymerization of 1,3-dimethoxybenzene or 1,3,5-trimethoxybenzene with formaldehyde in non-aqueous solvents. Using a procedure analogous to the preparation of resorcinol-formaldehyde (RF) aerogels, this approach generates wet gels that can be dried using either supercritical solvent extraction to generate the new organic aerogels or air dried to produce an xerogel. Other methods involve the sol-gel polymerization of 1,3,5 trihydroxy benzene (phloroglucinol) or 1,3 dihydroxy benzene (resorcinol) and various aldehydes in non-aqueous solvents. These methods use a procedure analogous to the one-step base and two-step base/acid catalyzed polycondensation of phloroglucinol and formaldehyde, but the base catalyst used is triethylamine. These methods can be applied to a variety of other sol-gel precursors and solvent systems. These hydrophobic organics aerogels have numerous application potentials in the field of material absorbers and water-proof insulation.

Baumann, Theodore F.; Satcher Jr., Joe H.; Gash, Alexander E.

2004-10-19T23:59:59.000Z

140

Aerosol preparation of intact lipoproteins  

DOE Patents [OSTI]

A medical diagnostic method and instrumentation system for analyzing noncovalently bonded agglomerated biological particles is described. The method and system comprises: a method of preparation for the biological particles; an electrospray generator; an alpha particle radiation source; a differential mobility analyzer; a particle counter; and data acquisition and analysis means. The medical device is useful for the assessment of human diseases, such as cardiac disease risk and hyperlipidemia, by rapid quantitative analysis of lipoprotein fraction densities. Initially, purification procedures are described to reduce an initial blood sample to an analytical input to the instrument. The measured sizes from the analytical sample are correlated with densities, resulting in a spectrum of lipoprotein densities. The lipoprotein density distribution can then be used to characterize cardiac and other lipid-related health risks.

Benner, W. Henry (Danville, CA); Krauss, Ronald M (Berkeley, CA); Blanche, Patricia J (Berkeley, CA)

2012-01-17T23:59:59.000Z

Note: This page contains sample records for the topic "addthis remarks prepared" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

PREPARING FOR A SUCCESSFUL EVMS CERTIFICATION  

SciTech Connect (OSTI)

The client, a government agency, requires its contractor to obtain an Earned Value Management System (EVMS) certification that meets the intent of ANSI/EIA-748-B, Earned Value Management Systems. The contractor has extensive experience with certification preparation, having completed two certifications within two years. Information from a previous EVMS certification and internal system surveillances are used to prepare for client-based EVMS certifications and bi-annual surveillances. The contractor also sent members of its group to assist other companies preparing for surveillances and certifications to perform 'Black Hat Reviews.' This paper is a lessons learned on preparing a team for EVMS certification. The information is also applicable for surveillances, since the contractor prepares its team for the surveillance in the same manner as the initial certification. Some of the areas covered include required documents, tracing the data through the systems, Control Account Manager (CAM) preparation, and system verification.

CROWE SL; BASCHE AD

2011-02-09T23:59:59.000Z

142

Synthesis and Optical Properties of Sulfide Nanoparticles Prepared...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Optical Properties of Sulfide Nanoparticles Prepared in Dimethylsulfoxide. Synthesis and Optical Properties of Sulfide Nanoparticles Prepared in Dimethylsulfoxide. Abstract: Many...

143

Preparing for Project Implementation Assigning Accountability...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Assigning Accountability for Each Project, April 14, 2010 Preparing for Project Implementation Assigning Accountability for Each Project, April 14, 2010 Assigning Accountability...

144

Document prepared by APIC Bioterrorism Task Force  

E-Print Network [OSTI]

ATTACHMENT Document prepared by APIC Bioterrorism Task Force Judith F. English, Mae Y. Cundiff of civilian populations not recommended. 3. Infection Control Practices for Patient Management Symptomatic

Oliver, Douglas L.

145

Process for preparing energetic materials  

DOE Patents [OSTI]

Sol-gel chemistry is used for the preparation of energetic materials (explosives, propellants and pyrotechnics) with improved homogeneity, and/or which can be cast to near-net shape, and/or made into precision molding powders. The sol-gel method is a synthetic chemical process where reactive monomers are mixed into a solution, polymerization occurs leading to a highly cross-linked three dimensional solid network resulting in a gel. The energetic materials can be incorporated during the formation of the solution or during the gel stage of the process. The composition, pore, and primary particle sizes, gel time, surface areas, and density may be tailored and controlled by the solution chemistry. The gel is then dried using supercritical extraction to produce a highly porous low density aerogel or by controlled slow evaporation to produce a xerogel. Applying stress during the extraction phase can result in high density materials. Thus, the sol-gel method can be used for precision detonator explosive manufacturing as well as producing precision explosives, propellants, and pyrotechnics, along with high power composite energetic materials.

Simpson, Randall L. (Livermore, CA); Lee, Ronald S. (Livermore, CA); Tillotson, Thomas M. (Tracy, CA; , Hrubesh, Lawrence W. (Pleasanton, CA); Swansiger, Rosalind W. (Livermore, CA); Fox, Glenn A. (Livermore, CA)

2011-12-13T23:59:59.000Z

146

DOE JGI Welcome Remarks  

SciTech Connect (OSTI)

Jim Bristow, Deputy Director of Programs at the DOE Joint Genome Institute, discusses the impact of advances in sequencing technologies on large genome centers on June 3, 2010 at the "Sequencing, Finishing, Analysis in the Future" meeting in Santa Fe, NM

Bristow, Jim [DOE Joint Genome Institute

2010-06-03T23:59:59.000Z

147

Concluding Remarks Andreas Zilges  

E-Print Network [OSTI]

Mitchell @DANCE and n_TOF Stefano Marrone Two step cascade method Milan Krticka (n capture + dicebox) #12 densities Monte Carlo Yoram Alhassid Hitoshi Nakada #12;Shell Model Monte Carlo #12;Theoretical Approaches The Brink hypothesis David Brink IBA folded with intrinsic Roberto Capote level densities Monte Carlo Yoram

Zilges, Andreas

148

Remarks on Superenergy Tensors  

E-Print Network [OSTI]

We define super-energy tensors for arbitrary physical fields, including the gravitational, electromagnetic and massless scalar fields. We also define super-super-energy tensors, and so on. All these tensors satisfy the so-called "Dominant Superenergy Property" among other interesting and good properties. The possibility of interchange of superenergy between gravitational and other fields is considered.

J M M Senovilla

1999-01-07T23:59:59.000Z

149

Women accomplishing remarkable feats  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear SecurityTensile Strain Switched FerromagnetismWaste and MaterialsWenjun DengWISPWind

150

PREPARATION OF A DRY PRODUCT FROM CONDENSED  

E-Print Network [OSTI]

PREPARATION OF A DRY PRODUCT FROM CONDENSED MENHADEN SOLUBLES Statistical Supplement WOODS HOI CONDENSED MENHADEN SOLUBLES: STATISTICAL ANALYSIS OF THE DATA (Supplement to the Fish and Wildlife Service. Fish and Wildlife Service Research Report k^, Preparation of a Dry Product from Condensed Menhaden

151

NOTICE OF PREPARATION: DRAFT ENVIRONMENTAL IMPACT REPORT  

E-Print Network [OSTI]

NOTICE OF PREPARATION: DRAFT ENVIRONMENTAL IMPACT REPORT DATE: September 25, 2013 TO: Responsible (Trustees) will be the lead agency for the preparation of an environmental impact report (EIR to: CSU Board of Trustees c/o Nicole Carter, Senior Planner SWCA Environmental Consultants 1422

Sze, Lawrence

152

Energy Audit Procedures Prepared for the  

E-Print Network [OSTI]

Energy Audit Procedures Prepared for the U.S. Department of Energy Office of Electricity Delivery Subtask 3.5.1: Residential Energy Efficiency Deliverable 1 Prepared by The University of Hawai or reflect those of the United States Government or any agency thereof. #12;Project Report 1: Energy Audit

153

Preparation of irregular mesoporous hydroxyapatite  

SciTech Connect (OSTI)

An irregular mesoporous hydroxyapatite (meso-HA), Ca{sub 10}(PO{sub 4}){sub 6}(OH){sub 2}, is successfully prepared from Ca(NO{sub 3}){sub 2}.4H{sub 2}O and NH{sub 4}H{sub 2}PO{sub 4} using surfactant cetyltrimethyl ammonium bromide (CTAB) as template. Fourier transform infrared spectroscopy (FTIR) and differential scanning calorimetry (DSC) results reveal that the positive head of CTAB is assembled on the surface precipitated HA and much NH{sub 4}{sup +} is enclosed in precipitated HA before calcination. Field scanning electron microscope (FSEM) reveals that there exist many interconnected pores throughout the HA reticular skeleton. Nitrogen adsorption-desorption experiment exhibits a mesoporous material type IV curve, and pore size distribution calculated from the desorption branch of the isotherms based on Barrett-Joyner-Halenda (BJH) model shows that most pores throughout the HA reticular skeleton are sized at about 40 nm, but the pores are not uniform on the whole, owning to decomposition of the 'organic' CTAB templating structures and ammonium salt enclosed in the precipitated HA. The specific surface area of irregular meso-HA is calculated to be 37.6 m{sup 2}/g according to the Brunauer-Emmett-Teller (BET) equation. Moreover, after polylactic acid/meso-HA (PLA/meso-HA) composites degraded 12 weeks in normal saline at 37 deg. C, the interconnected pores throughout the HA skeleton were enlarged and sized in micron degree, which resemble trabecular bone structure very much.

Wang Hualin [School of Chemical Technology, Hefei University of Technology, Hefei, Anhui 230009 (China)], E-mail: hlwang@hfut.edu.cn; Zhai Linfeng; Li Yanhong; Shi Tiejun [School of Chemical Technology, Hefei University of Technology, Hefei, Anhui 230009 (China)

2008-06-03T23:59:59.000Z

154

Hedva_roffe@edwards.com# to be send to4120CVs remarking position R&D Delivery systems Engineer Position #1204  

E-Print Network [OSTI]

Position #1204 R&D Delivery systems EngineerPosition' title: Develop and design Delivery systems systems design in the medical devices industry Proven Solid-works experience Lab testing mustHedva_roffe@edwards.com# to be send to4120CVs remarking position R&D Delivery systems Engineer

Rimon, Elon

155

Coal preparation: The essential clean coal technology  

SciTech Connect (OSTI)

This chapter is a brief introduction to a broad topic which has many highly specialized areas. The aim is to summarize the essential elements of coal preparation and illustrate its important role in facilitating the clean use of coal. Conventional coal preparation is the essential first step in ensuring the economic and environmentally acceptable use of coal. The aim of coal preparation is to produce saleable products of consistent, specified quality which satisfy customer requirements while optimizing the utilization of the coal resource. Coal preparation covers all aspects of preparing coal for the market. It includes size reduction, blending and homogenization and, most importantly, the process of physical beneficiation or washing, which involves separation of undesirable mineral matter from the coal substance itself. Coal preparation can be performed at different levels of sophistication and cost. The degree of coal preparation required is decided by considering the quality of the raw coal, transport costs and, in particular, the coal quality specified by the consumer. However, the cost of coal beneficiation rises rapidly with the complexity of the process and some coal is lost with the waste matter because of process inefficiencies, therefore each situation requires individual study to determine the optimum coal preparation strategy. The necessary expertise is available within APEC countries such as Australia. Coals destined for iron making are almost always highly beneficiated. Physical beneficiation is mostly confined to the higher rank, hard coals, but all other aspects of coal preparation can be applied to subbituminous and lignitic coals to improve their utilization. Also, there are some interesting developments aimed specifically at reducing the water content of lower rank coals.

Cain, D.

1993-12-31T23:59:59.000Z

156

Numerically Efficient Parallel Algorithms Prepared for the  

E-Print Network [OSTI]

Simulation using High Performance Computing Prepared by New Mexico Tech New Mexico Institute of Mining agency thereof. #12;Final Report for Task One Project: Application of High Performance Computing

157

a amework for change Prepared by  

E-Print Network [OSTI]

a amework for change Prepared by the California Air Resources Board for the State of California D. Nichols Chairman, Air Resources Board James N. Goldstene Executive O cer, Air Resources Board_____________________________________ C-138 Industry____________________________________________C-150 Recycling and Waste

158

a amework for change Prepared by  

E-Print Network [OSTI]

a amework for change Prepared by the California Air Resources Board for the State of California D. Nichols Chairman, Air Resources Board James N. Goldstene Executive O cer, Air Resources Board____________________________________________C-150 Recycling and Waste_________________________________ C-158 Forests

159

DOE Signs Notice to Prepare Environmental Assessment on Proposed...  

Broader source: Energy.gov (indexed) [DOE]

DOE Signs Notice to Prepare Environmental Assessment on Proposed Project with Germany DOE Signs Notice to Prepare Environmental Assessment on Proposed Project with Germany June 30,...

160

President Issues Executive Order Aimed at Preparing for the Impacts...  

Broader source: Energy.gov (indexed) [DOE]

President Issues Executive Order Aimed at Preparing for the Impacts of Climate Change; Tribal Leaders to Serve on Task Force President Issues Executive Order Aimed at Preparing for...

Note: This page contains sample records for the topic "addthis remarks prepared" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

EIS-0472: Notice of Intent to Prepare a Programmatic Environmental...  

Energy Savers [EERE]

Notice of Intent to Prepare a Programmatic Environmental Impact Statement EIS-0472: Notice of Intent to Prepare a Programmatic Environmental Impact Statement Uranium Leasing...

162

DOE to Prepare a Supplemental Environmental Impact Statement...  

Energy Savers [EERE]

Prepare a Supplemental Environmental Impact Statement for Proposed Surplus Plutonium Disposition at the Savannah River Site DOE to Prepare a Supplemental Environmental Impact...

163

EIS-0469: Notice of Intent To Prepare an Environmental Impact...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

69: Notice of Intent To Prepare an Environmental Impact Statement and to Conduct Scoping Meetings EIS-0469: Notice of Intent To Prepare an Environmental Impact Statement and to...

164

EIS-0509: Notice of Intent to Prepare Environmental Impact Statement...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

EIS-0509: Notice of Intent to Prepare Environmental Impact Statement EIS-0509: Notice of Intent to Prepare Environmental Impact Statement The Federal Energy Regulatory Commission...

165

EIS-0500: Notice of Intent to Prepare Environmental Impact Statement...  

Energy Savers [EERE]

Notice of Intent to Prepare Environmental Impact Statement EIS-0500: Notice of Intent to Prepare Environmental Impact Statement Crystal Springs Hatchery Program; Bingham, Custer,...

166

EIS-0502: Notice of Intent to Prepare Environmental Impact Statement...  

Energy Savers [EERE]

Notice of Intent to Prepare Environmental Impact Statement EIS-0502: Notice of Intent to Prepare Environmental Impact Statement Hot Springs to Anaconda Transmission Line Rebuild...

167

EIS-0310: Notice of Intent to Prepare a Programmatic Environmental...  

Energy Savers [EERE]

Notice of Intent to Prepare a Programmatic Environmental Impact Statement EIS-0310: Notice of Intent to Prepare a Programmatic Environmental Impact Statement Accomplishing Expanded...

168

EIS-0428: Notice of Intent to Prepare an Environmental Impact...  

Energy Savers [EERE]

28: Notice of Intent to Prepare an Environmental Impact Statement EIS-0428: Notice of Intent to Prepare an Environmental Impact Statement Construction and Startup of the...

169

EIS-0402: Advance Notice of Intent to Prepare an Environmental...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

EIS-0402: Advance Notice of Intent to Prepare an Environmental Impact Statement EIS-0402: Advance Notice of Intent to Prepare an Environmental Impact Statement Remediation of Area...

170

EIS-0510: FERC Notice of Intent to Prepare Environmental Impact...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

510: FERC Notice of Intent to Prepare Environmental Impact Statement EIS-0510: FERC Notice of Intent to Prepare Environmental Impact Statement Calcasieu Pass Project, Cameron...

171

EIS-0481: Notice of Intent to Prepare a Programmatic Environmental...  

Energy Savers [EERE]

81: Notice of Intent to Prepare a Programmatic Environmental Impact Statement EIS-0481: Notice of Intent to Prepare a Programmatic Environmental Impact Statement Engineered High...

172

EIS-0483: Notice of Intent to Prepare an Environmental Impact...  

Energy Savers [EERE]

Notice of Intent to Prepare an Environmental Impact Statement EIS-0483: Notice of Intent to Prepare an Environmental Impact Statement Estes to Flatiron Substation Transmission...

173

EIS-0504: Notice of Intent to Prepare Environmental Impact Statement...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Notice of Intent to Prepare Environmental Impact Statement EIS-0504: Notice of Intent to Prepare Environmental Impact Statement Gulf LNG Liquefaction Project, Jackson County,...

174

EIS-0494: Notice of Intent to Prepare an Environmental Impact...  

Energy Savers [EERE]

94: Notice of Intent to Prepare an Environmental Impact Statement EIS-0494: Notice of Intent to Prepare an Environmental Impact Statement Excelerate Liquefaction Solutions Lavaca...

175

EIS-0481: Notice of Intent to Prepare a Programmatic Environmental...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Notice of Intent to Prepare a Programmatic Environmental Impact Statement EIS-0481: Notice of Intent to Prepare a Programmatic Environmental Impact Statement Engineered High Energy...

176

EIS-0496: Notice of Intent to Prepare an Environmental Impact...  

Energy Savers [EERE]

6: Notice of Intent to Prepare an Environmental Impact Statement EIS-0496: Notice of Intent to Prepare an Environmental Impact Statement DOE's Western Area Power Administration...

177

EIS-0499: Notice of Intent to Prepare Environmental Impact Statement...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

499: Notice of Intent to Prepare Environmental Impact Statement EIS-0499: Notice of Intent to Prepare Environmental Impact Statement Great Northern Transmission Line Project The...

178

EIS-0491: Notice of Intent to Prepare an Environmental Impact...  

Energy Savers [EERE]

Notice of Intent to Prepare an Environmental Impact Statement EIS-0491: Notice of Intent to Prepare an Environmental Impact Statement Lake Charles Liquefaction Project, Calcasieu...

179

EIS-0510: FERC Notice of Intent to Prepare Environmental Impact...  

Energy Savers [EERE]

FERC Notice of Intent to Prepare Environmental Impact Statement EIS-0510: FERC Notice of Intent to Prepare Environmental Impact Statement Calcasieu Pass Project, Cameron Parish,...

180

EIS-0503: Notice of Intent to Prepare Environmental Impact Statement...  

Energy Savers [EERE]

Notice of Intent to Prepare Environmental Impact Statement EIS-0503: Notice of Intent to Prepare Environmental Impact Statement New England Clean Power Link, Vermont DOE announces...

Note: This page contains sample records for the topic "addthis remarks prepared" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Preparation and Characterisation of Vertically Aligned Carbon Nanotubes.  

E-Print Network [OSTI]

??This thesis presents the preparation of vertically aligned carbon nanotubes using porous anodic alumina templates via thermal chemical vapour deposition. The characteristics of prepared carbon (more)

Xu, Rui

2010-01-01T23:59:59.000Z

182

Redox Chemistry in Thin Layers of Organometallic Complexes Prepared...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Redox Chemistry in Thin Layers of Organometallic Complexes Prepared Using Ion Soft Landing. Redox Chemistry in Thin Layers of Organometallic Complexes Prepared Using Ion Soft...

183

EIS-0394: Advance Notice of Intent to Prepare an Environmental...  

Energy Savers [EERE]

Advance Notice of Intent to Prepare an Environmental Impact Statement EIS-0394: Advance Notice of Intent to Prepare an Environmental Impact Statement Implementation of the...

184

EIS-0301: Notice of Intent to Prepare an Environmental Impact...  

Broader source: Energy.gov (indexed) [DOE]

of Intent to Prepare an Environmental Impact Statement and Notice of Floodplain and Wetlands Involvement EIS-0301: Notice of Intent to Prepare an Environmental Impact Statement...

185

EIS-0390: Notice of Intent to Prepare an Environmental Impact...  

Broader source: Energy.gov (indexed) [DOE]

Intent to Prepare an Environmental Impact Statement; Floodplain and Wetlands Involvement; and Public Scoping Meetings EIS-0390: Notice of Intent to Prepare an Environmental Impact...

186

EIS-0409: Notice of Intent to Prepare an Environmental Impact...  

Broader source: Energy.gov (indexed) [DOE]

to Prepare an Environmental Impact Statement and Notice of Proposed Floodplain and Wetlands Involvement EIS-0409: Notice of Intent to Prepare an Environmental Impact Statement...

187

EIS-0475: Notice of Intent To Prepare an Environmental Impact...  

Broader source: Energy.gov (indexed) [DOE]

5: Notice of Intent To Prepare an Environmental Impact Statement and Notice of Wetlands Involvement EIS-0475: Notice of Intent To Prepare an Environmental Impact Statement and...

188

Preparation and screening of crystalline inorganic materials  

DOE Patents [OSTI]

Methods and apparatus for the preparation and use of a substrate having an array of diverse materials in predefined regions thereon. A substrate having an array of diverse materials thereon is generally prepared by delivering components of materials to predefined regions on a substrate, and simultaneously reacting the components to form at least two materials. Materials which can be prepared using the methods and apparatus of the present invention include, for example, covalent network solids, ionic solids and molecular solids. More particularly, materials which can be prepared using the methods and apparatus of the present invention include, for example, inorganic materials, intermetallic materials, metal alloys, ceramic materials, organic materials, organometallic materials, non-biological organic polymers, composite materials (e.g., inorganic composites, organic composites, or combinations thereof), etc. Once prepared, these materials can be screened for useful properties including, for example, electrical, thermal, mechanical, morphological, optical, magnetic, chemical, or other properties. Thus, the present invention provides methods for the parallel synthesis and analysis of novel materials having useful properties.

Schultz, Peter G. (La Jolla, CA); Xiang, Xiaodong (Danville, CA); Goldwasser, Isy (Palo Alto, CA); Brice{hacek over (n)}o, Gabriel (Baldwin Park, CA); Sun, Xiao-Dong (Fremont, CA); Wang, Kai-An (Cupertino, CA)

2008-10-28T23:59:59.000Z

189

Characterization of gels prepared from silicon ethoxide  

E-Print Network [OSTI]

by heating to a high temperature, with low heating rates. Tg and Tc were correlated to water gt alcohol contents in presence of HCI or HF. Aerogels were found to have high pore volume, low bulk density, large pore size, and weak mechanical strength.... Structures of dried gels 2. 3, Densification 13 14 15 19 19 CHAPTER III 3. 1. Raw materials 3. 2. Xerogel preparation 3. 3. Aerogel preparation 3. 4. Characterization of dried gels 3, 4. 1. Mercury porosimetry 3. 4. 2. BET analysis 3. 4, 3...

Yun, Su-Jin

2012-06-07T23:59:59.000Z

190

Method of preparing meso-haloalkylporphyrins  

DOE Patents [OSTI]

Transition metal complexes of meso-haloalkylporphyrins, wherein the haloalkyl groups contain 2 to 8 carbon atoms have been found to be highly effective catalysts for oxidation of alkanes and for the decomposition of hydroperoxides. Also disclosed is a process for the preparation of meso-halocarbyl-porphyrins which comprises contacting a halocarbyl dipyrromethane with a halocarbyl-substituted aldehyde in the presence of an acid granular solid catalyst. Also disclosed is a process for the preparation of meso-halocarbyl-porphyrins which comprises contacting a halocarbyl dipyrromethane with a halocarbyl-substituted aldehyde in the presence of an acid granular solic catalyst.

Wijesekera, Tilak (Glen Mills, PA); Lyons, James E. (Wallingford, PA); Ellis, Jr., Paul E. (Downingtown, PA); Bhinde, Manoj V. (Boothwyn, PA)

1998-01-01T23:59:59.000Z

191

JOURNAL DE PHYSIQUE Colloque C2, supplkment a u no 7, Tome 38, Juillet 1977, page C2-185 REMARKS ON THE SIZE DISTRIBUTION FUNCTION OF ULTRAFINE  

E-Print Network [OSTI]

. - The results of an detailed analysis of experimental size distributions of particle samples prepared by the gas tvaporation et condensation en gaz inerte (GET). En tenant compte des deux mbcanismes de croissance par distribution of ultrafine metal particles prepared by the gas evaporation technique (GET) can be ascribed

Boyer, Edmond

192

A remark on the role of indeterminism and non-locality in the violation of Bells inequalities  

SciTech Connect (OSTI)

Diederik Aerts was the first in the eighties to develop a concrete example of a macroscopic classical entity violating Bells inequalities (BI). In more recent years, he also developed a macroscopic model in which the amount of non-locality and indeterminism can be continuously varied, and used it to show that by increasing non-locality one increases the degree of violation of BI, whereas by increasing indeterminism one decreases the degree of violation of BI. In this article we introduce and analyze a different macroscopic model in which the amount of non-locality and indeterminism can also be parameterized, and therefore varied, and find that, in accordance with the model of Aerts, an increase of non-locality does produce a stronger violation of BI. However, differently from his model, we also find that, depending on the initial state in which the system is prepared, an increase of indeterminism can either strengthen or weaken the degree of violation of BI. -- Highlights: There are macroscopic models that can violate Bells inequalities (BI). We describe a model in which non-locality and indeterminism can be continuously varied. An increase of non-locality produces a stronger violation of BI. An increase of indeterminism can either produce a stronger or weaker violation of BI, depending on the initial state.

Sassoli de Bianchi, Massimiliano, E-mail: autoricerca@gmail.com

2014-03-15T23:59:59.000Z

193

Process for the preparation of an energetic nitrate ester  

DOE Patents [OSTI]

A process for the preparation of an energetic nitrate ester compound and related intermediates is provided.

Chavez, David E; Naud, Darren L; Hiskey, Michael A

2013-12-17T23:59:59.000Z

194

PREPARATION AND SPECTROSCOPIC PROPERTIES OF THREE NEW ACTINIDE (IV) BOROHYDRIDES  

E-Print Network [OSTI]

uranium tetrakis-borohydrides were prepared by a different reaction which involves the actinide tetrafluoride

Banks, Rodney Howard

2010-01-01T23:59:59.000Z

195

Energy Simulation Training Prepared for the  

E-Print Network [OSTI]

`i Natural Energy Institute University of Hawai`i Manoa #12;#12;TABLE OF CONTENTS HNEI FUNDING Program Subtask 3.5.1: Residential Energy Efficiency Deliverable 3 Prepared by The University of Hawai and Earth Science and Technology University of Hawai`i April 2013 #12;Acknowledgement: This material

196

Preparation of a semiconductor thin film  

DOE Patents [OSTI]

A process for the preparation of a semiconductor film. The process comprises depositing nanoparticles of a semiconductor material onto a substrate whose surface temperature during nanoparticle deposition thereon is sufficient to cause substantially simultaneous fusion of the nanoparticles to thereby coalesce with each other and effectuate film growth.

Pehnt, Martin (TuBingen, DE); Schulz, Douglas L. (Denver, CO); Curtis, Calvin J. (Lakewood, CO); Ginley, David S. (Evergreen, CO)

1998-01-01T23:59:59.000Z

197

Leafy Green Preparation and Cooling Study  

E-Print Network [OSTI]

Leafy Green Preparation and Cooling Study Dominique N. Bibbins #12;Background : Leafy Greens z In the past, leafy greens have been the source of food borne-illnesses and outbreaks. z It is important Lasting knowledge of survey practices, procedures, and protocol. #12;Acknowledgements z Laura Green, Ph

198

Process for the preparation of vinyl acetate  

DOE Patents [OSTI]

This invention pertains to the preparation of vinyl acetate by contacting within a contact zone a mixture of ketene and acetaldehyde with an acid catalyst at about one bar pressure and between about 85.degree. and 200.degree. C. and removing the reaction products from the contact zone.

Tustin, Gerald Charles (Kingsport, TN); Zoeller, Joseph Robert (Kingsport, TN); Depew, Leslie Sharon (Kingsport, TN)

1998-01-01T23:59:59.000Z

199

Process for the preparation of vinyl acetate  

DOE Patents [OSTI]

This invention pertains to the preparation of vinyl acetate by contacting within a contact zone a mixture of ketene and acetaldehyde with an acid catalyst at about one bar pressure and between about 85 and 200 C and removing the reaction products from the contact zone.

Tustin, G.C.; Zoeller, J.R.; Depew, L.S.

1998-02-17T23:59:59.000Z

200

Energy Efficient Data Centers Prepared by  

E-Print Network [OSTI]

Board - Equinix · Pacific Gas and Electric Company · New York State Energy Research and DevelopmentEnergy Efficient Data Centers Prepared by William Tschudi, Tengfang Xu, Dale Sartor, Bruce Nordman, Jon Koomey, and Osman Sezgen Environmental Energy Technologies Division Lawrence Berkeley National

Note: This page contains sample records for the topic "addthis remarks prepared" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Methods for preparation of catalytic materials  

SciTech Connect (OSTI)

To establish guidelines for the development of a scientific basis for catalyst preparation is perhaps a very ambitious goal. One would re required first to answer the following rhetorical questions: what are the properties which determine the performance of a catalytic material; how can these properties be introduced, developed, and/or improved during preparation? The answer to these questions involves a comprehensive discussion of the theories of catalysis, which is beyond the scope of this review. The authors will attempt, instead, to provide a rationale for each reader to answer these questions on the basis of his/her own interests. They start the discussion by describing the fundamental steps in producing bulk catalysts and/or catalyst supports. The fundamental processes involved are those derived from traditional three-dimensional chemistry. The topic areas will include single-component and multicomponent metal oxides. Unsupported metallic catalysts are formed by transformations involving physical or chemical processes, and the preparation methods for this class of materials will be discussed next. Attention will then turn to the preparation of supported catalytic materials. The main topics to be discussed will be those related to the interaction between the support and the active phase when they are put together to generate the catalyst. In this approach, the authors exploit the virtually unexplored field of surface, or two-dimensional, physical chemistry. The materials considered include dispersed metals and alloys and composite oxides. 366 refs.

Schwarz, J.A. [Syracuse Univ., NY (United States). Dept. of Chemical Engineering and Materials Science; Contescu, C.; Contescu, A. [Romanian Academy, Bucharest (Romania). Inst. of Physical Chemistry

1995-05-01T23:59:59.000Z

202

Preparation of a semiconductor thin film  

DOE Patents [OSTI]

A process is disclosed for the preparation of a semiconductor film. The process comprises depositing nanoparticles of a semiconductor material onto a substrate whose surface temperature during nanoparticle deposition thereon is sufficient to cause substantially simultaneous fusion of the nanoparticles to thereby coalesce with each other and effectuate film growth.

Pehnt, M.; Schulz, D.L.; Curtis, C.J.; Ginley, D.S.

1998-01-27T23:59:59.000Z

203

prepared at INRIA Sophia-Antipolis  

E-Print Network [OSTI]

PhD THESIS prepared at INRIA Sophia-Antipolis and presented at the University of Nice Sophia-Electrodes acquisitions in the retina Hassan NASSER Advisor Pr. Bruno Cessac INRIA Sophia-Antipolis Reviewers Pr. Stefano Statistique de l'ENS Examiners Pr. Pierre Kornprobst INRIA Sophia-Antipolis Pr. Adrián Palacios University

Paris-Sud XI, Université de

204

prepared at INRIA Sophia-Antipolis Mediterranee  

E-Print Network [OSTI]

PhD THESIS prepared at INRIA Sophia-Antipolis M´editerran´ee and presented at the University of Nice-Sophia Antipolis Graduate School of Information and Communication Sciences A dissertation´e-Salp^etri`ere, Paris, France Dr. Pierre Comon I3S / CNRS / University of Nice, France Dr. Rachid Deriche INRIA Sophia

Paris-Sud XI, Université de

205

prepared at Inria Sophia Antipolis -Mediterranee  

E-Print Network [OSTI]

PhD THESIS prepared at Inria Sophia Antipolis - M´editerran´ee and presented at the University of Nice-Sophia Antipolis Graduate School of Information and Communication Sciences A dissertation. Rachid Deriche, Inria Sophia Antipolis-M´editerran´ee, France Reviewers Dr. Christian Barillot, CNRS

Recanati, Catherine

206

prepared at INRIA Sophia-Antipolis Mediterranee  

E-Print Network [OSTI]

PhD THESIS prepared at INRIA Sophia-Antipolis M´editerran´ee and presented at the University of Nice-Sophia Antipolis Graduate School of Information and Communication Sciences A dissertation Features in Diffusion MRI Jian CHENG Advisers Dr. Rachid Deriche INRIA Sophia Antipolis, France Dr. Tianzi

Paris-Sud XI, Université de

207

prepared at INRIA Sophia Antipolis -Mditerrane  

E-Print Network [OSTI]

PhD THESIS prepared at INRIA Sophia Antipolis - Méditerranée and presented at the University of Nice-Sophia Antipolis Graduate School of Information and Communication Sciences A dissertation INRIA Sophia Antipolis, France Thierry VI?VILLE INRIA Sophia Antipolis, France President Rachid DERICHE

Paris-Sud XI, Université de

208

Think about it Preparing for Graduate School  

E-Print Network [OSTI]

Think about it Preparing for Graduate School Selecting Schools to Which You'll Apply Applying for Admittance The G.R.E. Writing Sample Campus Visits Graduate School Programs Your reasons for going to graduate school in English should go beyond simply that you like to read and write, that you like school

Sheridan, Jennifer

209

Test Preparation Options Free Test Prep Websites  

E-Print Network [OSTI]

Test Preparation Options Free Test Prep Websites ACT: http: http://www.collegeboard.com/student/testing/sat/prep_one/test.html http://www.number2.com://testprep.princetonreview.com/CourseSearch/Search.aspx?itemCode=17&productType=F&rid=1&zip=803 02 Test Prep Classes Front Range Community College: Classes

Stowell, Michael

210

CURRICULUM VITAE DATE PREPARED: September 5, 2007  

E-Print Network [OSTI]

CURRICULUM VITAE DATE PREPARED: September 5, 2007 PART I: General Information Education 2000- Organization for Human Brain Mapping (OHBM), Member HMS Curriculum Vitae Page 1 of 14 #12;2005- Society for Neuroscience (SFN), Member HMS Curriculum Vitae Page 2 of 14 #12;Part II: Research, Teaching

Boas, David

211

Photocatalytic methods for preparation of electrocatalyst materials  

DOE Patents [OSTI]

The invention relates to methods of preparing metal particles on a support material, including platinum-containing nanoparticles on a carbon support. Such materials can be used as electrocatalysts, for example as improved electrocatalysts in proton exchange membrane fuel cells (PEM-FCs).

Nwoga, Tochi Tudor; Kawahara, Kazuo; Li, Wen; Song, Yujiang; Shelnutt, John A; Miller, James E; Medforth, Craig John; Ueno, Yukiyoshi; Kawamura, Tetsuo

2013-12-17T23:59:59.000Z

212

Photocatalytic methods for preparation of electrocatalyst materials  

DOE Patents [OSTI]

The invention relates to methods of preparing metal particles on a support material, including platinum-containing nanoparticles on a carbon support. Such materials can be used as electrocatalysts, for example as improved electrocatalysts in polymer electrolyte membrane fuel cells (PEM-FCs).

Li, Wen; Kawamura, Tetsuo; Nagami, Tetsuo; Takahashi, Hiroaki; Muldoon, John; Shelnutt, John A; Song, Yujiang; Miller, James E; Hickner, Michael A; Medforth, Craig

2013-09-24T23:59:59.000Z

213

Data Update for Paxton, MA Prepared for  

E-Print Network [OSTI]

Data Update for Paxton, MA May, 2006 Prepared for Massachusetts Technology Collaborative, 75 North Drive, Westborough, MA 01581 By Kai Wu Monthly Data Summary for May, 2006 This update summarizes the monthly data results for the Paxton MA monitoring site at 42-18-11.6 N, 71-53-50.9 W per the WSG84

Massachusetts at Amherst, University of

214

Data Update for Paxton, MA Prepared for  

E-Print Network [OSTI]

Data Update for Paxton, MA June, 2006 Prepared for Massachusetts Technology Collaborative, 75 North Drive, Westborough, MA 01581 By Kai Wu Monthly Data Summary for June, 2006 This update summarizes the monthly data results for the Paxton MA monitoring site at 42-18-11.6 N, 71-53-50.9 W per the WSG84

Massachusetts at Amherst, University of

215

Data Update for Paxton, MA Prepared for  

E-Print Network [OSTI]

Data Update for Paxton, MA May, 2005 Prepared for Massachusetts Technology Collaborative, 75 North Drive, Westborough, MA 01581 By Kai Wu Monthly Data Summary for May, 2005 This update summarizes the monthly data results for the Paxton MA monitoring site at 42-18-11.6 N, 71-53-50.9 W per the WSG84

Massachusetts at Amherst, University of

216

Data Update for Paxton, MA Prepared for  

E-Print Network [OSTI]

Data Update for Paxton, MA July, 2005 Prepared for Massachusetts Technology Collaborative, 75 North Drive, Westborough, MA 01581 By Kai Wu Monthly Data Summary for July, 2005 This update summarizes the monthly data results for the Paxton MA monitoring site at 42-18-11.6 N, 71-53-50.9 W per the WSG84

Massachusetts at Amherst, University of

217

Data Update for Paxton, MA Prepared for  

E-Print Network [OSTI]

Data Update for Paxton, MA June, 2005 Prepared for Massachusetts Technology Collaborative, 75 North Drive, Westborough, MA 01581 By Kai Wu Monthly Data Summary for June, 2005 This update summarizes the monthly data results for the Paxton MA monitoring site at 42-18-11.6 N, 71-53-50.9 W per the WSG84

Massachusetts at Amherst, University of

218

Data Update for Paxton, MA Prepared for  

E-Print Network [OSTI]

Data Update for Paxton, MA July, 2006 Prepared for Massachusetts Technology Collaborative, 75 North Drive, Westborough, MA 01581 By Kai Wu Monthly Data Summary for July, 2006 This update summarizes the monthly data results for the Paxton MA monitoring site at 42-18-11.6 N, 71-53-50.9 W per the WSG84

Massachusetts at Amherst, University of

219

Steps in Preparing an Extension Publication.  

E-Print Network [OSTI]

- TDOC Z TA24S.7 B873 , nO.1296 _~J Stepsin Preparing an Extension Publication 1 A . It I University System gncu ura B-1296 ~ Texas Th~ Te~as A&M Extension Daniel C. Pfannstiel, Director '\\.... ~Arvice College Station, Texas 77843... CONTENTS Foreword.. . ......... ........... ........... 3 Approval Procedures for r--- Numbered Publications . ......... ,' . . . . . . . . 4 New Publications. . . . . . . . . . . . . . . . . . . . . .. 4 Reprints and Revisions...

Anonymous,

1980-01-01T23:59:59.000Z

220

The Economic State of Milwaukee, Prepared by  

E-Print Network [OSTI]

The Economic State of Milwaukee, 1990-2008 Prepared by: Center for Economic Development University of Wisconsin-Milwaukee December 2010 For further information contact: Joel Rast UWM Center for Economic of a two-year study by the University of Wisconsin-Milwaukee Center for Economic Development (CED

Saldin, Dilano

Note: This page contains sample records for the topic "addthis remarks prepared" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Process of preparing tritiated porous silicon  

DOE Patents [OSTI]

A process of preparing tritiated porous silicon is described in which porous silicon is equilibrated with a gaseous vapor containing HT/T{sub 2} gas in a diluent for a time sufficient for tritium in the gas phase to replace hydrogen present in the pore surfaces of the porous silicon. 1 fig.

Tam, S.W.

1997-02-18T23:59:59.000Z

222

Process of preparing tritiated porous silicon  

DOE Patents [OSTI]

A process of preparing tritiated porous silicon in which porous silicon is equilibrated with a gaseous vapor containing HT/T.sub.2 gas in a diluent for a time sufficient for tritium in the gas phase to replace hydrogen present in the pore surfaces of the porous silicon.

Tam, Shiu-Wing (Downers Grove, IL)

1997-01-01T23:59:59.000Z

223

Prepared by Ryan T. Kennelly, Economic Analyst  

E-Print Network [OSTI]

Prepared by Ryan T. Kennelly, Economic Analyst Center for Business and Economic Research Lee Business School University of Nevada, Las Vegas October 2012 #12;The Center for Business and Economic new economic indexes for the metropolitan area of Las Vegas, Nevada. We first construct a coincident

Hemmers, Oliver

224

Conventional coal preparation in the United States  

SciTech Connect (OSTI)

Processing of bituminous and anthracite coal is widely practiced in the United States and, as mentioned earlier, about 80 percent of the production of these coals is processed as clean coal in preparation plants. Subbituminous coal is not widely processed, primarily because these low rank raw coals are low in sulfur (0.5 to 1.0 percent) and relatively low in ash (8 to 15 percent). They are also relatively low in heat content due to their high inherent moisture. Lignite coals, to the best of the authors{close_quote} knowledge, are not presently being processed in Conventional Coal Preparation plants. This is due to their unstable nature and putting them in water in a coal preparation plant is likely to cause severe degradation in particle size and add to their already high inherent moisture content. The following are the benefits of clean coal processing: produces a uniform product which can be utilized more efficiently; produces a higher quality product which results in higher efficiency at the power station or the steel mill; reduces sulfur dioxide and other adverse stack emissions during coal firing which is a very important environmental consideration; reduces ash or slag handling costs by the user; reduces shipping costs; and reduces handling and storage costs. Processing any stable raw coal in a coal preparation plant will always produce a higher grade product which is a more efficient and a more environmentally acceptable fuel for use at power stations, steel mills, home heating or industrial boilers.

Beck, M.K.; Taylor, B.

1993-12-31T23:59:59.000Z

225

Preparation of fullerene/glass composites  

DOE Patents [OSTI]

Synthesis of fullerene/glass composites is described. A direct method for preparing solid solutions of C{sub 60} in silicon dioxide (SiO{sub 2}) glass matrices by means of sol-gel chemistry is described. In order to produce highly concentrated fullerene-sol-gel-composites it is necessary to increase the solubility of these ``guests`` in a delivery solvent which is compatible with the starter sol (receiving solvent). Sonication results in aggregate disruption by treatment with high frequency sound waves, thereby accelerating the rate of hydrolysis of the alkoxide precursor, and the solution process for the C{sub 60}. Depending upon the preparative procedure, C{sub 60} dispersed within the glass matrix as microcrystalline domains, or dispersed as true molecular solutions of C{sub 60} in a solid glass matrix, is generated by the present method.

Mattes, B.R.; McBranch, D.W.; Robinson, J.M.; Koskelo, A.C.; Love, S.P.

1995-05-30T23:59:59.000Z

226

Novel hard compositions and methods of preparation  

DOE Patents [OSTI]

Novel very hard compositions of matter are prepared by using in all embodiments only a minor amount of a particular carbide (or materials which can form the carbide in situ when subjected to heat and pressure); and no strategic cobalt is needed. Under a particular range of conditions, densified compositions of matter of the invention are prepared having hardnesses on the Rockwell A test substantially equal to the hardness of pure tungsten carbide and to two of the hardest commercial cobalt-bonded tungsten carbides. Alternately, other compositions of the invention which have slightly lower hardnesses than those described above in one embodiment also possess the advantage of requiring no tungsten and in another embodiment possess the advantage of having a good fracture toughness value.

Sheinberg, H.

1981-02-03T23:59:59.000Z

227

Preparation of fullerene/glass composites  

DOE Patents [OSTI]

Synthesis of fullerene/glass composites. A direct method for preparing solid solutions of C.sub.60 in silicon dioxide (SiO.sub.2) glass matrices by means of sol-gel chemistry is described. In order to produce highly concentrated fullerene-sol-gel-composites it is necessary to increase the solubility of these "guests" in a delivery solvent which is compatible with the starter sol (receiving solvent). Sonication results in aggregate disruption by treatment with high frequency sound waves, thereby accelerating the rate of hydrolysis of the alkoxide precursor, and the solution process for the C.sub.60. Depending upon the preparative procedure, C.sub.60 dispersed within the glass matrix as microcrystalline domains, or dispersed as true molecular solutions of C.sub.60 in a solid glass matrix, is generated by the present method.

Mattes, Benjamin R. (Santa Fe, NM); McBranch, Duncan W. (Santa Fe, NM); Robinson, Jeanne M. (Los Alamos, NM); Koskelo, Aaron C. (Los Alamos, NM); Love, Steven P. (Los Alamos, NM)

1995-01-01T23:59:59.000Z

228

Preparation and structure of hexagonal molybdenum trioxide  

SciTech Connect (OSTI)

The phase widely known as hexagonal MoO/sub 3/ is shown to correspond to the dehydrated and de-ammoniated decamolybdate. The latter material has the ideal stoichiometry NH/sub 4/Mo/sub 5/ O/sub 15/OH x 2H/sub 2/O. Relationships between a variety of materials with the decamolybdate structure are discussed. A novel preparative route to ammonium decamolybdate is described.

Caiger, N.A.; Crouch-Baker, S.; Dickens, P.G.; James, G.S.

1987-04-01T23:59:59.000Z

229

Method for preparing porous metal hydride compacts  

DOE Patents [OSTI]

A method for preparing porous metallic-matrix hydride compacts which can be repeatedly hydrided and dehydrided without disintegration. A mixture of a finely divided metal hydride and a finely divided matrix metal is contacted with a poison which prevents the metal hydride from dehydriding at room temperature and atmospheric pressure. The mixture of matrix metal and poisoned metal hydride is then compacted under pressure at room temperature to form porous metallic-matrix hydride compacts.

Ron, M.; Gruen, D.M.; Mendelsohn, M.H.; Sheft, I.

1980-01-21T23:59:59.000Z

230

LEAM Film Development Test Report Prepared by  

E-Print Network [OSTI]

Solar Test Test Item No. l Film Development Tests Test Item No. 2 Film Development Tests Test Item No. 3~~ ··········~~~ LEAM Film Development Test Report Prepared by: R. Sii'r'...ms ~1 rf\\:'3· ~ ij ATM Film Development Test Report -~~'·.· ··..· .··. . ~...=-~ ~ IWitJY~W ' ~· CONTENTS 1. PURPOSE 2. SCOPE

Rathbun, Julie A.

231

Process for preparing improved silvered glass mirrors  

DOE Patents [OSTI]

Glass mirrors having improved weathering properties are prepared by an improvement in the process for making the mirrors. The glass surface after it has been cleaned but before it is silvered, is contacted with a solution of lanthanide rare earths in addition to a sensitization solution of tin or palladium. The addition of the rare earths produces a mirror which has increased resistance to delamination of the silver from the glass surface in the presence of water.

Buckwalter, C.Q. Jr.

1980-01-28T23:59:59.000Z

232

Method for preparing porous metal hydride compacts  

DOE Patents [OSTI]

A method for preparing porous metallic-matrix hydride compacts which can be repeatedly hydrided and dehydrided without disintegration. A mixture of a finely divided metal hydride and a finely divided matrix metal is contacted with a poison which prevents the metal hydride from dehydriding at room temperature and atmospheric pressure. The mixture of matrix metal and poisoned metal hydride is then compacted under pressure at room temperature to form porous metallic-matrix hydride compacts.

Ron, Moshe (Haifa, IL); Gruen, Dieter M. (Downers Grove, IL); Mendelsohn, Marshall H. (Woodridge, IL); Sheft, Irving (Oak Park, IL)

1981-01-01T23:59:59.000Z

233

HEART SMART NUTRITION Prepare Food Right--Ensure It's Light  

E-Print Network [OSTI]

Lesson 4 HEART SMART NUTRITION Prepare Food Right--Ensure It's Light To prepare foods lower in fat Heart Smart? True or False ______ 1. A cholesterol- free product is also fat-free. True or False

234

Optimization of proteomic sample preparation procedures for comprehens...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

procedures for comprehensive protein characterization of pathogenic systems. Optimization of proteomic sample preparation procedures for comprehensive protein...

235

advanced coal preparation: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

... 15 1.6.2 Implement advanced clean coal technologies for production of energy products ... 15 An SAIC Report Prepared...

236

AGAROSE GEL PREPARATION AND DNA QUANTIFICATION  

E-Print Network [OSTI]

/µL concentration from the stock solution available 2. E.g., Promega, comes in a concentration of 450 ng/µL solution, to make a 2 ng/µL (prepare: Stock lambda (450 ng/µL) = 4.45 µL 3:1 buffer (TE:5X dye) = 995.55µL StoreL of each lambda (10, 25, 50ng) in the first 3 wells, which will serve as standards. 5. Take 1 µL of total

Gill, Kulvinder

237

Process for preparing silicon carbide foam  

DOE Patents [OSTI]

A method of preparing near net shape, monolithic, porous SiC foams is disclosed. Organosilicon precursors are used to produce polymeric gels by thermally induced phase separation, wherein, a sufficiently concentrated solution of an organosilicon polymer is cooled below its solidification temperature to form a gel. Following solvent removal from the gel, the polymer foam is pretreated in an oxygen plasma in order to raise its glass transition temperature. The pretreated foam is then pyrolyzed in an inert atmosphere to form a SiC foam. 9 figs.

Whinnery, L.L.; Nichols, M.C.; Wheeler, D.R.; Loy, D.A.

1997-09-16T23:59:59.000Z

238

Process for preparing silicon carbide foam  

DOE Patents [OSTI]

A method of preparing near net shape, monolithic, porous SiC foams is disclosed. Organosilicon precursors are used to produce polymeric gels by thermally induced phase separation, wherein, a sufficiently concentrated solution of an organosilicon polymer is cooled below its solidification temperature to form a gel. Following solvent removal from the gel, the polymer foam is pretreated in an oxygen plasma in order to raise its glass transition temperature. The pretreated foam is then pyrolized in an inert atmosphere to form a SiC foam.

Whinnery, LeRoy Louis (Livermore, CA); Nichols, Monte Carl (Livermore, CA); Wheeler, David Roger (Albuquerque, NM); Loy, Douglas Anson (Albuquerque, NM)

1997-01-01T23:59:59.000Z

239

Improved method for preparing rare earth sesquichalcogenides  

DOE Patents [OSTI]

An improved method for the preparation of high purity rare earth sesquichalcogenides is described. The rare earth, as one or more pieces of the metal, is sealed under a vacuum with a stoichiometric amount of sulfur or selenium and a small amount of iodine into a quartz reaction vessel. The sealed vessel is then heated to above the vaporization temperature of the chalcogen and below the melting temperature of the rare earth metal and maintained until the product has been formed. The iodine is then vaporized off leaving a pure product. The rare earth sulfides and selenides thus formed are useful as semiconductors and as thermoelectric generators. 3 tables.

Takeshita, T.; Beaudry, B.J.; Gschneidner, K.A. Jr.

1982-04-14T23:59:59.000Z

240

Method for preparing high purity vanadium  

DOE Patents [OSTI]

A method for preparing high purity vanadium having a low silicon content has been developed. Vanadium pentoxide is reduced with a stoichiometric, or slightly deficient amount of aluminum to produce a vanadium-aluminum alloy containing an excess of oxygen. Silicon is removed by electron-beam melting the alloy under oxidizing conditions to promote the formation of SiO which is volatile at elevated temperatures. Excess oxygen is removed by heating the alloy in the presence of calcium metal to form calcium oxide.

Schmidt, Frederick (Ames, IA); Carlson, O. Norman (Ames, IA)

1986-09-09T23:59:59.000Z

Note: This page contains sample records for the topic "addthis remarks prepared" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Method for preparing high purity vanadium  

DOE Patents [OSTI]

A method for preparing high purity vanadium having a low silicon content has been developed. Vanadium pentoxide is reduced with a stoichiometric, or slightly deficient amount of aluminum to produce a vanadium-aluminum alloy containing an excess of oxygen. Silicon is removed by electron-beam melting the alloy under oxidizing conditions to promote the formation of SiO which is volatile at elevated temperatures. Excess oxygen is removed by heating the alloy in the presence of calcium metal to form calcium oxide.

Schmidt, F.; Carlson, O.N.

1984-05-16T23:59:59.000Z

242

Preparation of thorium-uranium gel spheres  

SciTech Connect (OSTI)

Ceramic oxide spheres with diameters of 15 to 1500 ..mu..m are being evaluated for fabrication of power reactor fuel rods. (Th,U)O/sub 2/ spheres can be prepared by internal or external chemical gelation of nitrate solutions or oxide sols. Two established external gelation techniques were tested but proved to be unsatisfactory for the intended application. Established internal gelation techniques for UO/sub 2/ spheres were applied with minor modifications to make 75% ThO/sub 2/-25% UO/sub 2/ spheres that sinter to diameters of 200 to 1400 ..mu..m (99% T.D.).

Spence, R.D.; Haas, P.A.

1980-01-01T23:59:59.000Z

243

Preparation of diallyl phthalate prepolymer solutions  

SciTech Connect (OSTI)

A process is claimed for preparing prepolymers of a diallyl phthalate at room temperature. The process is characterized by the fact that the solution of a diallyl phthalate alone or a diallyl phthalate and another copolymerizable monomer, in a liquid ketone at ambient temperature, is heated in the presence of a free radical-forming catalyst, preferably hydrogen peroxide, as well as in the presence of a small amount of a strong acid until at least 60% and advantageously at least 90% of the monomer initially present has been converted to the prepolymer.

Not Available

1982-12-01T23:59:59.000Z

244

Method to prepare nanoparticles on porous mediums  

DOE Patents [OSTI]

A method to prepare porous medium decorated with nanoparticles involves contacting a suspension of nanoparticles in an ionic liquid with a porous medium such that the particles diffuse into the pores of the medium followed by heating the resulting composition to a temperature equal to or greater than the thermal decomposition temperature of the ionic liquid resulting in the removal of the liquid portion of the suspension. The nanoparticles can be a metal, an alloy, or a metal compound. The resulting compositions can be used as catalysts, sensors, or separators.

Vieth, Gabriel M. (Knoxville, TN) [Knoxville, TN; Dudney, Nancy J. (Oak Ridge, TN) [Oak Ridge, TN; Dai, Sheng (Knoxville, TN) [Knoxville, TN

2010-08-10T23:59:59.000Z

245

Conductive ceramic composition and method of preparation  

DOE Patents [OSTI]

A ceramic anode composition is formed of a multivalent metal oxide or oxygenate such as an alkali metal, transition metal oxygenate. The anode is prepared as a non-stoichiometric crystalline structure by reaction and conditioning in a hydrogen gas cover containing minor proportions of carbon dioxide and water vapor. The structure exhibits a single phase and substantially enhanced electrical conductivity over that of the corresponding stoichiometric structure. Unexpectedly, such oxides and oxygenates are found to be stable in the reducing anode fuel gas of a molten carbonate fuel cell.

Smith, James L. (Lemont, IL); Kucera, Eugenia H. (Downers Grove, IL)

1991-01-01T23:59:59.000Z

246

Preparation of Papers for AIAA Technical Conferences  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 - SeptemberMicroneedles for medical point07.06 AgendaPreparation for a

247

Preparation, Characterization, and Catalytic Properties of Tungsten  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 - SeptemberMicroneedles for medical point07.06 AgendaPreparation forTrioxide Cyclic

248

Preparation of reactive beta-dicalcium silicate  

DOE Patents [OSTI]

This invention relates to the preparation of fine particles of reactive beta-dicalcium silicate by means of a solid state process which comprises firing a mixture of calcium sulfate, silica and a reducing additive selected from the group consisting of calcium sulfide, carbon, carbon monoxide, methane and hydrogen, at a temperature of about 850.degree.-1000.degree. C. A carrier gas such as nitrogen or carbon dioxide may also be added, if desired. A high concentration of sulfur dioxide is a by-product of this process.

Shen, Ming-Shing (Laramie, WY, NJ); Chen, James M. (Rahway, NJ); Yang, Ralph T. (Amherst, NY)

1982-01-01T23:59:59.000Z

249

Preparation of reactive beta-dicalcium silicate  

DOE Patents [OSTI]

This invention relates to the preparation of fine particles of reactive beta-dicalcium silicate by means of a solid state process which comprises firing a mixture of calcium sulfate, silica, and a reducing additive selected from the group consisting of calcium sulfide, carbon, carbon monoxide, methane, and hydrogen, at a temperature of about 850 to 1000/sup 0/C. A carrier gas such as nitrogen or carbon dioxide may also be added, if desired. A high concentration of sulfur dioxide is a by-product of this process.

Shen, M.S.; Chen, J.M.; Yang, R.T.

1980-02-28T23:59:59.000Z

250

Conductive ceramic composition and method of preparation  

DOE Patents [OSTI]

A ceramic anode composition is formed of a multivalent metal oxide or oxygenate such as an alkali metal, transition metal oxygenate. The anode is prepared as a non-stoichiometric crystalline structure by reaction and conditioning in a hydrogen gas cover containing minor proportions of carbon dioxide and water vapor. The structure exhibits a single phase and substantially enhanced electrical conductivity over that of the corresponding stoichiometric structure. Unexpectedly, such oxides and oxygenates are found to be stable in the reducing anode fuel gas of a molten carbonate fuel cell. 4 figures.

Smith, J.L.; Kucera, E.H.

1991-04-16T23:59:59.000Z

251

Novel hard compositions and methods of preparation  

DOE Patents [OSTI]

Novel very hard compositions of matter are prepared by using in all embodiments only a minor amount of a particular carbide (or materials which can form the carbide in situ when subjected to heat and pressure); and no strategic cobalt is needed. Under a particular range of conditions, densified compositions of matter of the invention are prepared having hardnesses on the Rockwell A test substantially equal to the hardness of pure tungsten carbide and to two of the hardest commercial cobalt-bonded tungsten carbides. Alternately, other compositions of the invention which have slightly lower hardnesses than those described above in one embodiment also possess the advantage of requiring no tungsten and in another embodiment possess the advantage of having a good fracture toughness value. Photomicrographs show that the shapes of the grains of the alloy mixture with which the minor amount of carbide (or carbide-formers) is mixed are radically altered from large, rounded to small, very angular by the addition of the carbide. Superiority of one of these hard compositions of matter over cobalt-bonded tungsten carbide for ultra-high pressure anvil applications was demonstrated. 3 figs.

Sheinberg, H.

1983-08-23T23:59:59.000Z

252

Novel hard compositions and methods of preparation  

DOE Patents [OSTI]

Novel very hard compositions of matter are prepared by using in all embodiments only a minor amount of a particular carbide (or materials which can form the carbide in situ when subjected to heat and pressure); and no strategic cobalt is needed. Under a particular range of conditions, densified compositions of matter of the invention are prepared having hardnesses on the Rockwell A test substantially equal to the hardness of pure tungsten carbide and to two of the hardest commercial cobalt-bonded tungsten carbides. Alternately, other compositions of the invention which have slightly lower hardnesses than those described above in one embodiment also possess the advantage of requiring no tungsten and in another embodiment possess the advantage of having a good fracture toughness value. Photomicrographs show that the shapes of the grains of the alloy mixture with which the minor amount of carbide (or carbide-formers) is mixed are radically altered from large, rounded to small, very angular by the addition of the carbide. Superiority of one of these hard compositions of matter over cobalt-bonded tungsten carbide for ultra-high pressure anvil applications was demonstrated.

Sheinberg, Haskell (Los Alamos, NM)

1983-08-23T23:59:59.000Z

253

Ambient pressure process for preparing aerogel thin films reliquified sols useful in preparing aerogel thin films  

DOE Patents [OSTI]

A method for preparing aerogel thin films by an ambient-pressure, continuous process. The method of this invention obviates the use of an autoclave and is amenable to the formation of thin films by operations such as dip coating. The method is less energy intensive and less dangerous than conventional supercritical aerogel processing techniques.

Brinker, Charles Jeffrey (Albuquerque, NM); Prakash, Sai Sivasankaran (Minneapolis, MN)

1999-01-01T23:59:59.000Z

254

Remotely prepared entanglement: a quantum web page  

E-Print Network [OSTI]

In quantum teleportation, an unknown quantum state is transmitted from one party to another using only local operations and classical communication, at the cost of shared entanglement. Is it possible similarly, using an $N$ party entangled state, to have the state retrievable by {\\it any} of the $N-1$ possible receivers? If the receivers cooperate, and share a suitable state, this can be done reliably. The $N$ party GHZ is one such state; I derive a large class of such states, and show that they are in general not equivalent to the GHZ. I also briefly discuss the problem where the parties do not cooperate, and the relationship to multipartite entanglement quantification. I define a new set of entanglement monotones, the entanglements of preparation.

Todd A. Brun

2001-07-05T23:59:59.000Z

255

Method of preparing composite superconducting wire  

DOE Patents [OSTI]

An improved method of preparing composite multifilament superconducting wire of Nb.sub.3 Sn in a copper matrix which eliminates the necessity of coating the drawn wire with tin. A generalized cylindrical billet of an alloy of copper containing at least 15 weight percent niobium, present in the copper as discrete, randomly distributed and oriented dendritic-shaped particles, is provided with at least one longitudinal opening which is filled with tin to form a composite drawing rod. The drawing rod is then drawn to form a ductile composite multifilament wire containing a filament of tin. The ductile wire containing the tin can then be wound into magnet coils or other devices before heating to diffuse the tin through the wire to react with the niobium forming Nb.sub.3 Sn. Also described is an improved method for making large billets of the copper-niobium alloy by consumable-arc casting.

Verhoeven, John D. (Ames, IA); Gibson, Edwin D. (Ames, IA); Finnemore, Douglas K. (Ames, IA); Ostenson, Jerome E. (Ames, IA); Schmidt, Frederick A. (Ames, IA); Owen, Charles V. (Ames, IA)

1985-08-06T23:59:59.000Z

256

Preparation of stable crude oil transport emulsions  

SciTech Connect (OSTI)

A process for preparing an oil-in-water emulsion for pipeline transmission is described comprising: (a) shearing and mixing statically, without any dynamic shearing and mixing preceding or following the shearing and mixing statically, a hydrocarbon with an emulsifying composition comprising water and a minor amount of an emulsifying agent at a temperature of from about 100/sup 0/F. to about 200/sup 0/F. to form an oil-in-water emulsion having a viscosity sufficiently low for pipeline transmission, wherein the amount of water in the oil-in-water emulsion is from about 15% to about 60% by weight, and wherein the emulsifying agent is used in an amount sufficient to assist in the formation of the oil-in-water emulsion that is sufficiently stable for pipeline transmission; and wherein the emulsifying agent comprises about 50 percent by weight of an ethoxylated nonyl phenol compound.

Gregoli, A.A.; Hamshar, J.A.; Olah, A.M.; Riley, C.J.; Rimmer, D.P.

1988-02-16T23:59:59.000Z

257

Summary and concluding remarks Summary and concluding remarks  

E-Print Network [OSTI]

cholesterol secretion, indicating that ABCB4 plays an essential role in cellular lipid efflux. Since, including ABCA1 and ABCG1. ABCA1 is implicated in the cholesterol and phospholipid transfer to lipid and phospholipid to mature HDL. Plasma membranes of eukaryotic cells are asymmetrically composed of lipids, where

van den Brink, Jeroen

258

Section 6 Concluding Remarks 31 6. Concluding Remarks  

E-Print Network [OSTI]

and a rotor bearing R. The rotor consists of a permanent magnet P and a shaft S. Current I in the coil results permanent magnets and controlled by low cost microcontrollers. The motors have low friction, small size Figure 8). The finger joints are primitive permanent magnet DC motors consisting of a single stator coil

Mishra, Bud

259

Craig Western Undergraduate Valedictorian Remarks  

E-Print Network [OSTI]

at midnight last night, threw back a couple energy drinks, and came up with what you're about to hear. It the committed and hardworking employees of Salvatori Computer Science Hall, for without you, we would have afternoon you're studying by the fountain in the quad and that night you're swimming in it with your whole

Southern California, University of

260

Preparation and in situ Characterization of Surfaces Using Soft...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

in situ Characterization of Surfaces Using Soft-Landing in a Fourier Transform Ion Cyclotron Resonance Mass Preparation and in situ Characterization of Surfaces Using Soft-Landing...

Note: This page contains sample records for the topic "addthis remarks prepared" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Student Design Competition Guide to Project Preparation and Submittal...  

Broader source: Energy.gov (indexed) [DOE]

Guide to Project Preparation and Submittal DOE Challenge Home Student Competition Procuring Architectural and Engineering Services for Energy Efficiency and Sustainability...

262

EIS-0402: Amended Notice of Intent to Prepare an Environmental...  

Energy Savers [EERE]

to prepare an environmental impact statement (EIS) for cleanup of Area IV, including the Energy Technology Engineering Center (ETEC), as well as the Northern Buffer Zone of the...

263

activated carbon preparation: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

mesoporous carbon-based composites for confinement of Eue Mesoporous polymer-carbon composite (CMPEICMK-3) materials were successfully prepared. After Eu(III) ions were loaded...

264

activated carbon prepared: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

mesoporous carbon-based composites for confinement of Eue Mesoporous polymer-carbon composite (CMPEICMK-3) materials were successfully prepared. After Eu(III) ions were loaded...

265

Preparations of rare earth-iron alloys by thermite reduction  

DOE Patents [OSTI]

An improved method for the preparation of high-purity rare earth-iron alloys by the aluminothermic reduction of a mixture of rare earth and iron fluorides.

Schmidt, Frederick A. (Ames, IA); Peterson, David T. (Ames, IA); Wheelock, John T. (Nevada, IA)

1986-09-16T23:59:59.000Z

266

BPA Fact Sheet - Preparing for reliability entity registration...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Preparing for reliability entity registration Based on the NERC Functional Model The Energy Policy Act of 2005 (EPAct 2005) strongly emphasized reliability of the nation's bulk...

267

EIS-0355: Notice of Intent to Prepare an Environmental Impact...  

Broader source: Energy.gov (indexed) [DOE]

and Notice of Floodplain and Wetlands Involvement Remediation of the Moab Uranium Mill Tailings Site in Grand County, UT DOE announces its intent to prepare an Environmental...

268

Virginia, Maryland teams prepare for Regional Middle School Science...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Virginia, Maryland teams prepare for Regional Middle School Science Bowl March 3, 2005 The Department of Energy's Jefferson Lab, in Newport News, Va., hosts the VirginiaMaryland...

269

Jefferson Lab's Science Education Website Helps Students Prepare...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Jefferson Lab's Science Education Website Helps Students Prepare for Upcoming Standards of Learning Tests April 12, 2004 Usage of Jefferson Lab's Science Education website is...

270

RUS Bulletin 1794A-601: Preparing an Environmental Report for...  

Open Energy Info (EERE)

601: Preparing an Environmental Report for an Environmental Assessment Jump to: navigation, search OpenEI Reference LibraryAdd to library PermittingRegulatory Guidance -...

271

ATP: polynucleotide adenylyltransferase enzyme and method of preparation thereof  

DOE Patents [OSTI]

The invention relates to ATP: polynucleotide adenylyltransferase enzyme and a method for its preparation comprising extraction from monocotyledonous plant tissue and chromatographic separation.

Mans, Rusty J. (Gainesville, FL)

1987-01-01T23:59:59.000Z

272

Dominican Republic-Support for the Preparation of National Climate...  

Open Energy Info (EERE)

National Climate Change Strategy Jump to: navigation, search Name Dominican Republic-Argentina-Support for the Preparation of National Climate Change Strategy AgencyCompany...

273

Bay Bridge Lights Presentation prepared by Zoon Engineering  

Energy Savers [EERE]

2015 BAY BRIDGE LIGHTS Presentation prepared by Zoon Engineering Presentation Outline Lighting of the New East Span of the Bay Bridge Brief Over view Lighting Facts ...

274

EIS-0498: Notice of Intent to Prepare an Environmental Impact...  

Energy Savers [EERE]

Notice of Intent to Prepare an Environmental Impact Statement Magnolia Liquefied Natural Gas Project, Calcasieu Parish, Louisiana The Federal Energy Regulatory Commission...

275

Jefferson Lab Website Offers Preparation Help For Virginia Standards...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Preparation Help For Virginia Standards of Learning Tests NEWPORT NEWS, Va., April 27, 2009 - Along with the return of warm weather and blooming flowers, another sure sign of...

276

ORNL staff help students prepare for FIRST LEGO League competition...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

staff help students prepare for FIRST LEGO League competition Brian Peters, right, a design engineer for nuclear systems with US ITER at Oak Ridge National Laboratory, works with...

277

p-Type transparent conducting oxides and methods for preparation  

DOE Patents [OSTI]

A facile, low temperature and low pressure method for the preparation of a wide range of phase pure ABO.sub.2 compositions.

Shahriari, Dean Y. (Evanston, IL); Barnabe, Antoine (Toulouse, FR); Mason, Thomas O. (Evanston, IL); Poeppelmeier, Kenneth R. (Evanston, IL)

2011-05-31T23:59:59.000Z

278

RUS Bulletin 1794-A-600: Preparing an Environmental Report for...  

Open Energy Info (EERE)

RUS Bulletin 1794-A-600: Preparing an Environmental Report for Categorically Excluded Projects Jump to: navigation, search OpenEI Reference LibraryAdd to library Permitting...

279

EIS-0361: Notice of Intent to Prepare an Environmental Impact...  

Broader source: Energy.gov (indexed) [DOE]

West Virginia The U.S. Department of Energy (DOE) announces its intent to prepare an Environmental Impact Statement (EIS) to assess the potential environmental impacts of a...

280

EIS-0269: Notice of Intent to Prepare a Programmatic Environmental...  

Energy Savers [EERE]

EIS-0269: Notice of Intent to Prepare a Programmatic Environmental Impact Statement Alternative Strategies for the Long-Term Management and Use of Depleted Uranium Hexafluoride,...

Note: This page contains sample records for the topic "addthis remarks prepared" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

EIS-0463: Notice of Intent to Prepare an Environmental Impact...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

an Environmental Impact Statement and Conduct Public Scoping Meetings Presidential Permit Application for Northern Pass Transmission, New Hampshire Notice of Intent To Prepare...

282

Surveillance Guides - PTS 13.2 Packaging and Preparation for...  

Broader source: Energy.gov (indexed) [DOE]

Facility Representative RL Facility Representative Program April 10, 1995 Surveillance Guide PTS 13.2 Revision 0 Packaging and Preparation for Shipment Page 1 of...

283

EIS-0323: Notice of Intent to Prepare a Supplemental Environmental...  

Broader source: Energy.gov (indexed) [DOE]

Project in California The Western Area Power Administration (Western), Department of Energy (DOE), intends to prepare a Supplemental Environmental Impact Statement (SEIS) to...

284

Controlled environment vitrification system for preparation of liquids  

DOE Patents [OSTI]

A system is described for preparing specimens in a controlled environment to insure that a liquid or partially liquid specimen is maintained in its original state while it is being prepared, and once prepared the specimen is vitrified or solidified with minimal alteration of its microstructure. The controlled environment is provided within a chamber where humidity and temperature can be controlled precisely while the specimen is prepared. The specimen is mounted on a plunger and a shutter controlled opening is opened substantially simultaneously with release of the plunger so the specimen is propelled through the shutter into an adjacent cryogenic bath. 7 figs.

Bellare, J.R.; Davis, H.T.; Scriven, L.E. II; Talmon, Y.

1988-06-28T23:59:59.000Z

285

Advanced Post-Combustion CO2 Capture Prepared for the  

E-Print Network [OSTI]

Advanced Post-Combustion CO2 Capture Prepared for the Clean Air Task Force under a grant from...................................................................................... 3 2. Current Status of Post-Combustion Capture

286

EIS-0403: Notice of Intent to Prepare a Programmatic Environmental...  

Broader source: Energy.gov (indexed) [DOE]

EIS-0403: Notice of Intent to Prepare a Programmatic Environmental Impact Statement Solar Energy Development in Six Southwestern States The Agencies have determined that a...

287

Nevada National Security Site Groundwater Program Prepares for...  

Energy Savers [EERE]

the site in preparation for an independent peer review of the historic underground test area, Frenchman Flat. In August 2010, the peer review panel found model projections to...

288

EIS-0366: Notice of Intent to Prepare a Programmatic Environmental...  

Broader source: Energy.gov (indexed) [DOE]

of Intent to Prepare a Programmatic Environmental Impact Statement Implementation of the Carbon Sequestration Program The U.S. Department of Energy (DOE) announces its intent to...

289

Final Guidance on Improving the Process for Preparing Efficient...  

Broader source: Energy.gov (indexed) [DOE]

the Process for Preparing Efficient and Timely Environmental Reviews under the National Environmental Policy Act. The National Environmental Policy Act (NEPA) and CEQ Regulations...

290

EIS-0429: Notice of Intent to Prepare an Environmental Impact...  

Energy Savers [EERE]

Statement EIS-0429: Notice of Intent to Prepare an Environmental Impact Statement Construction and Startup of the Indiana Gasification, LLC, Industrial Gasification Facility in...

291

EIS-0432: Notice of Intent to Prepare an Environmental Impact...  

Energy Savers [EERE]

to Prepare an Environmental Impact Statement Federal Loan Guarantee to Support the Construction and Startup of the Medicine Bow Fuel & Power Coal-to-Liquid Facility in Carbon...

292

EIS-0389: Notice of Intent To Prepare an Environmental Impact...  

Broader source: Energy.gov (indexed) [DOE]

Environmental Impact Statement and Conduct Scoping Meetings; Notice of Floodplain and Wetlands Involvement EIS-0389: Notice of Intent To Prepare an Environmental Impact Statement...

293

EIS-0395: Notice of Intent to Prepare an Environmental Impact...  

Broader source: Energy.gov (indexed) [DOE]

Impact Statement and to Conduct Public Scoping Meetings and Notice of Floodplain and Wetlands Involvement EIS-0395: Notice of Intent to Prepare an Environmental Impact Statement...

294

Public Scoping for Preparation of a Programmatic Environmental Impact  

E-Print Network [OSTI]

0 Public Scoping for Preparation of a Programmatic Environmental Impact Statement for the Deepwater........................................................................................................................................1 III. Natural Resources Damage Assessment..........................................................................................................................7 VIII. Environmental Consequences of Restoration Types

295

Preparation and Characterization of Graphene Oxide Paper  

SciTech Connect (OSTI)

Free-standing paper-like or foil-like materials are an integral part of our technological society. Their uses include protective layers, chemical filters, components of electrical batteries or supercapacitors, adhesive layers, electronic or optoelectronic components, and molecular storage. Inorganic 'paper-like' materials based on nanoscale components such as exfoliated vermiculite or mica platelets have been intensively studied and commercialized as protective coatings, high-temperature binders, dielectric barriers and gas-impermeable membranes. Carbon-based flexible graphite foils composed of stacked platelets of expanded graphite have long been used in packing and gasketing applications because of their chemical resistivity against most media, superior sealability over a wide temperature range, and impermeability to fluids. The discovery of carbon nanotubes brought about bucky paper, which displays excellent mechanical and electrical properties that make it potentially suitable for fuel cell and structural composite applications. Here we report the preparation and characterization of graphene oxide paper, a free-standing carbon-based membrane material made by flow-directed assembly of individual graphene oxide sheets. This new material outperforms many other paper-like materials in stiffness and strength. Its combination of macroscopic flexibility and stiffness is a result of a unique interlocking-tile arrangement of the nanoscale graphene oxide sheets.

Dikin,D.; Stankovich, S.; Zimney, E.; Piner, R.; Dommett, G.; Evmenenko, G.; Nguyen, S.; Ruoff, R.

2007-01-01T23:59:59.000Z

296

Method of preparation of removable syntactic foam  

DOE Patents [OSTI]

Easily removable, environmentally safe, low-density, syntactic foams are disclosed which are prepared by mixing insoluble microballoons with a solution of water and/or alcohol-soluble polymer to produce a pourable slurry, optionally vacuum filtering the slurry in varying degrees to remove unwanted solvent and solute polymer, and drying to remove residual solvent. The properties of the foams can be controlled by the concentration and physical properties of the polymer, and by the size and properties of the microballoons. The suggested solute polymers are non-toxic and soluble in environmentally safe solvents such as water or low-molecular weight alcohols. The syntactic foams produced by this process are particularly useful in those applications where ease of removability is beneficial, and could find use in packaging recoverable electronic components, in drilling and mining applications, in building trades, in art works, in the entertainment industry for special effects, in manufacturing as temporary fixtures, in agriculture as temporary supports and containers and for delivery of fertilizer, in medicine as casts and splints, as temporary thermal barriers, as temporary protective covers for fragile objects, as filters for particulate matter, which matter may be easily recovered upon exposure to a solvent, as in-situ valves (for one-time use) which go from maximum to minimum impedance when solvent flows through, and for the automatic opening or closing of spring-loaded, mechanical switches upon exposure to a solvent, among other applications. 1 fig.

Arnold, C. Jr.; Derzon, D.K.; Nelson, J.S.; Rand, P.B.

1995-07-11T23:59:59.000Z

297

Method for preparing high purity vanadium  

SciTech Connect (OSTI)

A method is described of preparing high-purity, low-silicon vanadium metal from vanadium pentoxide containing silicon, iron and other impurities comprising: mixing the vanadium pentoxide with aluminum to form a reaction mixture, the quantity of aluminum in the mixture being from about stoichiometric to about 10% deficient in the amount necessary to completely reduce the vanadium pentoxide to vanadium metal: heating the mixture under reducing conditions to a temperature sufficient to react the mixture to reduce the vanadium pentoxide and form a vanadium-aluminum alloy containing silicon, iron and from about 0.6 to about 3 weight percent oxygen; heating the alloy under reduced pressure to a temperature sufficient to vaporize the aluminum and iron in the alloy and to react the silicon with some of the oxygen to form volatile silicon monoxide which vaporizes away from the alloy thereby removing aluminum, iron, silicon and some of the oxygen from the vanadium metal, and heating the vanadium metal in the presence of calcium metal to a temperature and for a period of time sufficient for the oxygen to diffuse from the vanadium and react with the calcium to form calcium oxide, thereby removing oxygen from the vanadium metal, forming a high-purity, low-silicon vanadium metal.

Schmidt, F.; Carlson, O.N.

1986-09-09T23:59:59.000Z

298

Preparation for upgrading western subbituminous coal  

SciTech Connect (OSTI)

The objective of this project was to establish the physical and chemical characteristics of western coal and determine the best preparation technologies for upgrading this resource. Western coal was characterized as an abundant, easily mineable, clean, low-sulfur coal with low heating value, high moisture, susceptibility to spontaneous ignition, and considerable transit distances from major markets. Project support was provided by the Morgantown Energy Technology Center (METC) of the US Department of Energy (DOE). The research was conducted by the Western Research Institute, (WRI) in Laramie, Wyoming. The project scope of work required the completion of four tasks: (1) project planning, (2) literature searches and verbal contacts with consumers and producers of western coal, (3) selection of the best technologies to upgrade western coal, and (4) identification of research needed to develop the best technologies for upgrading western coals. The results of this research suggest that thermal drying is the best technology for upgrading western coals. There is a significant need for further research in areas involving physical and chemical stabilization of the dried coal product. Excessive particle-size degradation and resulting dustiness, moisture reabsorption, and high susceptibility to spontaneous combustion are key areas requiring further research. Improved testing methods for the determination of equilibrium moisture and susceptibility to spontaneous ignition under various ambient conditions are recommended.

Grimes, R.W.; Cha, C.Y.; Sheesley, D.C.

1990-11-01T23:59:59.000Z

299

Preparation and characterization of gradient polymer films  

SciTech Connect (OSTI)

Gradient polymers are multicomponent polymers whose chemical constitution varies with depth in the sample. Although these polymers may possess unique mechanical, optical, and barrier properties they remain relatively unexplored. This work is a study of the preparation of gradient polymers by sequential exposure of films to a diffusing monomer followed by electron beam irradiation. Initial experiments involved immersion of poly(vinyl chloride) (PVC) films in styrene or n-butyl methacrylate (BMA) for various time periods followed by irradiation with 1 or 10 megarads of accelerated electrons. A significant amount of poly(n-butyl methacrylate) (PBMA) formed in PVC/BMA systems, but little polystyrene could be found in the PVC/styrene films. A second set of experiments involved immersion of PVC and polyethylene (PE) films in BMA for 20, 40, 60, and 720 minutes followed by irradiation with 10 megarads of electrons. These films were then characterized using optical microscopy, quantitative transmission Fourier transform infrared spectroscopy (FTIR), and a depth profiling procedure based on quantitative attenuated total reflection (ATR) FTIR. It was concluded that the mechanism of PBMA formation in the polyethylene films was a result of events immediately following irradiation. Atmospheric oxygen diffusing into irradiated films trapped free radicals at the film surfaces. This was followed by storage in an evacuated desiccator where unintentional exposure to BMA vapor took place. This BMA reacted with free radicals that remained within the film cores, polymerizing to PBMA.

Smith, S.C.

1987-01-01T23:59:59.000Z

300

Method of preparation of removable syntactic foam  

DOE Patents [OSTI]

Easily removable, environmentally safe, low-density, syntactic foams are disclosed which are prepared by mixing insoluble microballoons with a solution of water and/or alcohol-soluble polymer to produce a pourable slurry, optionally vacuum filtering the slurry in varying degrees to remove unwanted solvent and solute polymer, and drying to remove residual solvent. The properties of the foams can be controlled by the concentration and physical properties of the polymer, and by the size and properties of the microballoons. The suggested solute polymers are non-toxic and soluble in environmentally safe solvents such as water or low-molecular weight alcohols. The syntactic foams produced by this process are particularly useful in those applications where ease of removability is beneficial, and could find use in packaging recoverable electronic components, in drilling and mining applications, in building trades, in art works, in the entertainment industry for special effects, in manufacturing as temporary fixtures, in agriculture as temporary supports and containers and for delivery of fertilizer, in medicine as casts and splints, as temporary thermal barriers, as temporary protective covers for fragile objects, as filters for particulate matter, which matter may be easily recovered upon exposure to a solvent, as in-situ valves (for one-time use) which go from maximum to minimum impedance when solvent flows through, and for the automatic opening or closing of spring-loaded, mechanical switches upon exposure to a solvent, among other applications.

Arnold, Jr., Charles (Albuquerque, NM); Derzon, Dora K. (Albuquerque, NM); Nelson, Jill S. (Albuquerque, NM); Rand, Peter B. (Albuquerque, NM)

1995-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "addthis remarks prepared" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Preparation and Analysis of Biomass Lignins  

SciTech Connect (OSTI)

Lignin, comprised primarily of three randomly polymerized phenylpropenyl monomers, is, arguably, the second most common organic molecule on earth. In current biorefinery applications, lignin is burned, usually in concentrated pulping or hydrolysis liquor, as a source of process steam and both internal and exported electricity. The aromatic content of lignin makes it a potentially attractive feedstock for highly-valued aromatic chemicals, polymers, and carbon products (graphite, activated carbon, and carbon fiber). Revenue from production of lignin-based chemicals could play a major role in biorefinery profitability if cost-effective methods for lignin separation and purification can be developed. This article presents descriptions of methods for assessing and purifying biorefinery lignins so that they can be evaluated for use as feedstocks for production of chemical products. Areas covered are: 1) initial evaluations of as-received lignin samples (visual, microscopic, separable organics), 2) analysis of common contaminants (bulk and filterable ash and particulate contaminants in liquid and dry lignin samples), 3) preparation of lignins for experimental use as chemical feedstocks (prefiltration, filtration using bench-scale chemical apparatus and larger scale bag filters, one-step lignin precipitation, two-step carbohydrate and lignin precipitation, desalting of dry powdered or precipitated lignin, and lyophilization). These methods have been used successfully at bench-scale to produce the 1 50 kg amounts of wood and grass lignins typically required for bench-scale assessment as chemical feedstocks

Compere, A L [ORNL; Griffith, William {Bill} L [ORNL

2009-01-01T23:59:59.000Z

302

Microfluidic DNA sample preparation method and device  

DOE Patents [OSTI]

Manipulation of DNA molecules in solution has become an essential aspect of genetic analyses used for biomedical assays, the identification of hazardous bacterial agents, and in decoding the human genome. Currently, most of the steps involved in preparing a DNA sample for analysis are performed manually and are time, labor, and equipment intensive. These steps include extraction of the DNA from spores or cells, separation of the DNA from other particles and molecules in the solution (e.g. dust, smoke, cell/spore debris, and proteins), and separation of the DNA itself into strands of specific lengths. Dielectrophoresis (DEP), a phenomenon whereby polarizable particles move in response to a gradient in electric field, can be used to manipulate and separate DNA in an automated fashion, considerably reducing the time and expense involved in DNA analyses, as well as allowing for the miniaturization of DNA analysis instruments. These applications include direct transport of DNA, trapping of DNA to allow for its separation from other particles or molecules in the solution, and the separation of DNA into strands of varying lengths.

Krulevitch, Peter A. (Pleasanton, CA); Miles, Robin R. (Danville, CA); Wang, Xiao-Bo (San Diego, CA); Mariella, Raymond P. (Danville, CA); Gascoyne, Peter R. C. (Bellaire, TX); Balch, Joseph W. (Livermore, CA)

2002-01-01T23:59:59.000Z

303

Remarkably reduced efficiency droop by using staircase thin InGaN quantum barriers in InGaN based blue light emitting diodes  

SciTech Connect (OSTI)

The efficiency droop of InGaN/GaN(InGaN) multiple quantum well (MQW) light emitting diodes (LEDs) with thin quantum barriers (QB) is studied. With thin GaN QB (3?nm6?nm thickness), the efficiency droop is not improved, which indicates that hole transport cannot be significantly enhanced by the thin GaN QBs. On the contrary, the efficiency droop was remarkably reduced by using a InGaN staircase QB (InGaN SC-QB) MQWs structure where InGaN SC-QBs lower the transport energy barrier of holes. The efficiency droop ratio was as low as 3.3% up to 200?A/cm{sup 2} for the InGaN SC-QB LED. By using monitoring QW with longer wavelength we observe a much uniform carrier distribution in the InGaN SC-QB LEDs, which reveals the mechanism of improvement in the efficiency droop.

Zhou, Kun; Ikeda, Masao, E-mail: mikeda2013@sinano.ac.cn, E-mail: jpliu2010@sinano.ac.cn; Liu, Jianping, E-mail: mikeda2013@sinano.ac.cn, E-mail: jpliu2010@sinano.ac.cn; Zhang, Shuming; Li, Deyao; Zhang, Liqun; Yang, Hui [Suzhou Institute of Nano-tech and Nano-bionics, Chinese Academy of Sciences, Suzhou (China); Key Laboratory of Nanodevices and Applications, Chinese Academy of Sciences, Suzhou (China); Cai, Jin; Wang, Hui; Wang, H. B. [Suzhou Institute of Nano-tech and Nano-bionics, Chinese Academy of Sciences, Suzhou (China); Key Laboratory of Nanodevices and Applications, Chinese Academy of Sciences, Suzhou (China); Suzhou Nanojoin Photonics Co., Ltd., Suzhou (China)

2014-10-27T23:59:59.000Z

304

A Pilot Project in Preparation of an Aerodynamic Optimization Workshop  

E-Print Network [OSTI]

A Pilot Project in Preparation of an Aerodynamic Optimization Workshop with Lessons Learned John C-scale Aerodynamic Optimization Workshop. Three independent optimization efforts were conducted concurrently, each in the preparation of a possible future workshop on aerodynamic shape optimization. 1.0 Introduction During AIAA

Jameson, Antony

305

Formulation and method for preparing gels comprising hydrous hafnium oxide  

DOE Patents [OSTI]

Formulations useful for preparing hydrous hafnium oxide gels contain a metal salt including hafnium, an acid, an organic base, and a complexing agent. Methods for preparing gels containing hydrous hafnium oxide include heating a formulation to a temperature sufficient to induce gel formation, where the formulation contains a metal salt including hafnium, an acid, an organic base, and a complexing agent.

Collins, Jack L; Hunt, Rodney D; Montgomery, Frederick C

2013-08-06T23:59:59.000Z

306

Formulation and method for preparing gels comprising hydrous cerium oxide  

DOE Patents [OSTI]

Formulations useful for preparing hydrous cerium oxide gels contain a metal salt including cerium, an organic base, and a complexing agent. Methods for preparing gels containing hydrous cerium oxide include heating a formulation to a temperature sufficient to induce gel formation, where the formulation contains a metal salt including cerium, an organic base, and a complexing agent.

Collins, Jack L; Chi, Anthony

2013-05-07T23:59:59.000Z

307

u DATA PREPARATION FOR DATA SHICHAO ZHANG and CHENGQI ZHANG  

E-Print Network [OSTI]

u DATA PREPARATION FOR DATA MINING SHICHAO ZHANG and CHENGQI ZHANG Faculty of Information of Science andTechnology, Kowloon, Hong Kong, China Data preparation is a fundamental stage of data analysis. While a lot of low-quality information is available in various data sources and on the Web, many

Yang, Qiang

308

Formulation and method for preparing gels comprising hydrous aluminum oxide  

SciTech Connect (OSTI)

Formulations useful for preparing hydrous aluminum oxide gels contain a metal salt including aluminum, an organic base, and a complexing agent. Methods for preparing gels containing hydrous aluminum oxide include heating a formulation to a temperature sufficient to induce gel formation, where the formulation contains a metal salt including aluminum, an organic base, and a complexing agent.

Collins, Jack L.

2014-06-17T23:59:59.000Z

309

Notice of Preparation, Comments, and Scoping Meeting Transcript  

E-Print Network [OSTI]

DRAFT ENVIRONMENTAL IMPACT REPORT Project Title: Richmond Bay Campus 2013 Long Range Development Plan of the California Environmental Quality Act (CEQA), this Notice of Preparation is hereby sent to inform you that UC is preparing a Draft Environmental Impact Report (EIR) on the RBC 2013 LRDP and Phase 1 development. The EIR

Lee, Jason R.

310

Observation of a remarkable temperature effect in the hydrogen bonding structure and dynamics of the CN-(H2O) cluster  

SciTech Connect (OSTI)

The CN-(H2O) cluster represents a model diatomic monohydrate with multiple solvation sites. We report joint experimental and theoretical studies of its structure and dynamics using temperature-controlled photoelectron spectroscopy (PES) and ab-initio electronic structure calculations. The observed PES spectra of CN-(H2O) display a remarkable temperature effect, namely that the T=12 K spectrum shows an unexpectedly large blue shift of 0.25 eV in the electron binding energy relative to the Room Temperature (RT) spectrum. Extensive theoretical analysis of the potential energy function (PEF) of the cluster at the CCSD(T) level of theory reveal the existence of two nearly isoenergetic isomers corresponding to H2O forming a H-bond with either the C or the N atom, respectively. This results in four topologically distinct minima, i.e., CN-(HaOHb), CN-(HbOHa), NC-(HaOHb) and NC-(HbOHa). There are two main pathways connecting these minima: (i) CN- tumbling relative to water and (ii) water rocking relative to CN-. The relative magnitude of the barriers associated with these two motions reverses between low [pathway (i) is preferred] and high [pathway (ii) is preferred] temperatures. As a result, at T=12 K the cluster adopts a structure that is close to the minimum energy CN-(H2O) configuration, while at RT it can effectively access regions of the PEF close to the transition state for pathway (ii), explaining the surprisingly large spectral shift between the 12 K and RT PES spectra. This work was supported by the Division of Chemical Sciences, Geosciences and Biosciences, Office of Basic Energy Sciences, US Department of Energy. Battelle operates Pacific Northwest National Laboratory for the US Department of Energy.

Wang, Xue B.; Werhahn, Jasper C.; Wang, Lai S.; Kowalski, Karol; Laubereau, Alfred; Xantheas, Sotiris S.

2009-09-03T23:59:59.000Z

311

Method for loading lipsomes with ionizable phosphorylated hydrophobic compounds, pharmaceutical preparations and a method for administering the preparations  

DOE Patents [OSTI]

A method of entrapping ionizable compounds, preferably phosphorylated hydrophobic compounds, into liposomes having transmembrane gradients is disclosed. The procedures involve forming liposomes in an acidic medium or a basic medium, adding to the acidic medium a cationic compound or to the basic medium an anionic compound and then adding a base to the cationic-containing medium or an acid to the anionic-containing medium, thereby inducing the ionizable compound into the liposomes` internal aqueous phase. The compound-entrapped liposomes prepared in accordance with the disclosed methods may be used as pharmaceutical preparations. Methods of administering such pharmaceutical preparations are also disclosed. 2 figs.

Mehlhorn, R.J.

1998-10-27T23:59:59.000Z

312

Method for loading lipsomes with ionizable phosphorylated hydrophobic compounds, pharmaceutical preparations and a method for administering the preparations  

DOE Patents [OSTI]

A method of entrapping ionizable compounds, preferably phosphorylated hydrophobic compounds, into liposomes having transmembrane gradients is disclosed. The procedures involve forming liposomes in an acidic medium or a basic medium, adding to the acidic medium a cationic compound or to the basic medium an anionic compound and then adding a base to the cationic-containing medium or an acid to the anionic-containing medium, thereby inducing the ionizable compound into the liposomes' internal aqueous phase. The compound-entrapped liposomes prepared in accordance with the disclosed methods may be used as pharmaceutical preparations. Methods of administering such pharmaceutical preparations are also disclosed.

Mehlhorn, Rolf Joachim (Richmond, CA)

1998-10-27T23:59:59.000Z

313

STAFFREPORT Prepared for the Bioenergy Interagency Working Group  

E-Print Network [OSTI]

STAFFREPORT Prepared for the Bioenergy Interagency Working Group: Air Resources Board 2010 2009 PROGRESS TO PLAN BIOENERGY ACTION PLAN FOR CALIFORNIA CALIFORNIA ENERGY COMMISSION #12, and et. al. 2010. 2009 Progress to Plan Bioenergy Action Plan for California. California Energy

314

Jefferson Lab's Science Education Website Helps Students Prepare...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

is the "Who Wants to Win 1,000,000 Math and Science Quiz Jefferson Lab's Science Education Website Helps Students Prepare for Upcoming Standards of Learning Tests April 7,...

315

Hamilton Truck Route Study Prepared for the City of Hamilton  

E-Print Network [OSTI]

Hamilton Truck Route Study Prepared for the City of Hamilton March 2012 #12;#12;Hamilton Truck and Logistics McMaster University Hamilton, Ontario March 2012 mitl.mcmaster.ca #12;#12;McMaster Institute

Haykin, Simon

316

Appendix A. Notice of Inquiry: Preparation of Report to Congress...  

Office of Environmental Management (EM)

of Report to Congress on Price-Anderson Act. 62 Federal Register 68,272 (December 31, 1997) Appendix A. Notice of Inquiry: Preparation of Report to Congress on Price-Anderson...

317

Preparations of rare earth-iron alloys by thermite reduction  

DOE Patents [OSTI]

Disclosed is an improved method for the preparation of high-purity rare earth-iron alloys by the aluminothermic reduction of a mixture of rare earth and iron fluorides.

Schmidt, F.A.; Peterson, D.T.; Wheelock, J.T.

1985-10-28T23:59:59.000Z

318

Career Preparation for Handicapped Adolescents: A Matter of Appropriate Education  

E-Print Network [OSTI]

A complete individualization concept is presented as the avenue to achieve "appropriate education" for handicapped adolescents. Exemplified within the context of the educational goal of career preparation, this concept ...

Clark, Gary M.

1980-01-01T23:59:59.000Z

319

Data Preparation Process for the Buildings Performance Database  

SciTech Connect (OSTI)

The Buildings Performance Database (BPD) includes empirically measured data from a variety of data sources with varying degrees of data quality and data availability. The purpose of the data preparation process is to maintain data quality within the database and to ensure that all database entries have sufficient data for meaningful analysis and for the database API. Data preparation is a systematic process of mapping data into the Building Energy Data Exchange Specification (BEDES), cleansing data using a set of criteria and rules of thumb, and deriving values such as energy totals and dominant asset types. The data preparation process takes the most amount of effort and time therefore most of the cleansing process has been automated. The process also needs to adapt as more data is contributed to the BPD and as building technologies over time. The data preparation process is an essential step between data contributed by providers and data published to the public in the BPD.

Walter, Travis; Dunn, Laurel; Mercado, Andrea; Brown, Richard E.; Mathew, Paul

2014-06-30T23:59:59.000Z

320

Methods and apparatuses for preparing upgraded pyrolysis oil  

DOE Patents [OSTI]

Methods and apparatuses for preparing upgraded pyrolysis oil are provided herein. In an embodiment, a method of preparing upgraded pyrolysis oil includes providing a biomass-derived pyrolysis oil stream having an original oxygen content. The biomass-derived pyrolysis oil stream is hydrodeoxygenated under catalysis in the presence of hydrogen to form a hydrodeoxygenated pyrolysis oil stream comprising a cyclic paraffin component. At least a portion of the hydrodeoxygenated pyrolysis oil stream is dehydrogenated under catalysis to form the upgraded pyrolysis oil.

Brandvold, Timothy A; Baird, Lance Awender; Frey, Stanley Joseph

2013-10-01T23:59:59.000Z

Note: This page contains sample records for the topic "addthis remarks prepared" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

CARRIER PREPARATION BUILDING MATERIALS HANDLING SYSTEM DESCRIPTION DOCUMENT  

SciTech Connect (OSTI)

The Carrier Preparation Building Materials Handling System receives rail and truck shipping casks from the Carrier/Cask Transport System, and inspects and prepares the shipping casks for return to the Carrier/Cask Transport System. Carrier preparation operations for carriers/casks received at the surface repository include performing a radiation survey of the carrier and cask, removing/retracting the personnel barrier, measuring the cask temperature, removing/retracting the impact limiters, removing the cask tie-downs (if any), and installing the cask trunnions (if any). The shipping operations for carriers/casks leaving the surface repository include removing the cask trunnions (if any), installing the cask tie-downs (if any), installing the impact limiters, performing a radiation survey of the cask, and installing the personnel barrier. There are four parallel carrier/cask preparation lines installed in the Carrier Preparation Building with two preparation bays in each line, each of which can accommodate carrier/cask shipping and receiving. The lines are operated concurrently to handle the waste shipping throughputs and to allow system maintenance operations. One remotely operated overhead bridge crane and one remotely operated manipulator is provided for each pair of carrier/cask preparation lines servicing four preparation bays. Remotely operated support equipment includes a manipulator and tooling and fixtures for removing and installing personnel barriers, impact limiters, cask trunnions, and cask tie-downs. Remote handling equipment is designed to facilitate maintenance, dose reduction, and replacement of interchangeable components where appropriate. Semi-automatic, manual, and backup control methods support normal, abnormal, and recovery operations. Laydown areas and equipment are included as required for transportation system components (e.g., personnel barriers and impact limiters), fixtures, and tooling to support abnormal and recovery operations. The Carrier Preparation Building Materials Handling System interfaces with the Cask/Carrier Transport System to move the carriers to and from the system. The Carrier Preparation Building System houses the equipment and provides the facility, utility, safety, communications, and auxiliary systems supporting operations and protecting personnel.

E.F. Loros

2000-06-28T23:59:59.000Z

322

THE REMARKABLE XRAY JET IN THE QUASAR 4C 20.24 D.A. Schwartz 1 , H.L. Marshall 2 , J. Gelbord 2 , E.S. Perlman 3 , M. Georganopoulos 3 , M. Birkinshaw 4 ,  

E-Print Network [OSTI]

1 THE REMARKABLE XRAY JET IN THE QUASAR 4C 20.24 D.A. Schwartz 1 , H.L. Marshall 2 , J. Gelbord 2 by Chandra as part of a snapshot survey of ra dio jets (Marshall et al., 2005a). The survey, which is on the radio jet to the north (Marshall et al., 2006). The Xray flux was roughly 6.5 #22;Jy, only about 20

Schwartz, Daniel

323

E-Print Network 3.0 - alice photocathode preparation Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

and waveguides - are b e i i produced using MOCVD prepared Ga... examples of optoelectronic devices and OEICs will be discussed and the MOCVD equipment employed to prepare...

324

Effect of different intravenous iron preparations on lymphocyte intracellular reactive oxygen species generation and subpopulation survival.  

E-Print Network [OSTI]

IV iron compounds induced greater intracellular ROS generation,IV iron preparations on intracellular reactive oxygen species generationIV iron preparations on intracellular immune cell ROS generation

Gupta, Ajay; Zhuo, Jiaying; Zha, Junli; Reddy, Srinivasa; Olp, Jonathan; Pai, Amy

2010-01-01T23:59:59.000Z

325

EIS-0082-S2: Notice of Intent to Prepare a Supplemental Environmental...  

Office of Environmental Management (EM)

082-S2: Notice of Intent to Prepare a Supplemental Environmental Impact Statement EIS-0082-S2: Notice of Intent to Prepare a Supplemental Environmental Impact Statement...

326

EIS-0236: Notice of Intent to Prepare a Supplement to the Programmatic...  

Energy Savers [EERE]

: Notice of Intent to Prepare a Supplement to the Programmatic Environmental Impact Statement EIS-0236: Notice of Intent to Prepare a Supplement to the Programmatic Environmental...

327

Preparing for a Water Emergency A tool for food processors, food manufacturers,  

E-Print Network [OSTI]

volume water users to be better prepared for water shortage and contamination emergencies Good business you become better prepared for a water shortage or water contamination situation. #12;PreparingPreparing for a Water Emergency A tool for food processors, food manufacturers, and other large

Keinan, Alon

328

Neural Dynamics of Reaching following Incorrect or Absent Motor Preparation  

E-Print Network [OSTI]

, Stanford University, Stanford, CA 94305, USA 2Department of Neurosurgery, Palo Alto Medical Foundation, Palo Alto, CA 94301, USA 3Department of Electrical Engineering, Stanford University, Stanford, CA 94305 percentage of trials. Neural population activity bypassed the prepare- and-hold state both in the absence

Shenoy, Krishna V.

329

Quantum Turing Machines: Local Transition, Preparation, Measurement, and Halting  

E-Print Network [OSTI]

Foundations of the theory of quantum Turing machines are investigated. The protocol for the preparation and the measurement of quantum Turing machines is discussed. The local transition functions are characterized for fully general quantum Turing machines. A new halting protocol is proposed without augmenting the halting qubit and is shown to work without spoiling the computation.

Masanao Ozawa

1998-09-14T23:59:59.000Z

330

Video Article Preparation of Complaint Matrices for Quantifying Cellular Contraction  

E-Print Network [OSTI]

solutions should be disposed as hazardous waste. 6. Dry coverslips in incubator at warm temperature (~37°C and remodeling with traction forces. Here we present a detailed experimental protocol for the preparation of two mechanical stiffness, which is suitable for measuring cellular contraction. These protocols include

Gardel, Margaret

331

Future STEM Leaders Prepare for the National Science Bowl  

SciTech Connect (OSTI)

Each year, students from across the country converge on Washington, DC, for the National Science Bowl, an intense academic competition that tests the students' knowledge in science, engineering, chemistry, math and Earth science. Follow one team, from Washington DC's Woodrow Wilson High School, as they prepare for and compete in the 2014 National Science Bowl.

Benjamin, Angela

2014-06-11T23:59:59.000Z

332

Planning Health Into Your Meals Unit Preparation Materials and  

E-Print Network [OSTI]

UNIT 14: Planning Health Into Your Meals Unit Preparation Materials and Facilitator Guide #12; #12;Navigating for Success Planning Health into Your Meals Copyright 2007. Do not reproduce or distribute without Planning Health into Your Meals WHO: Participants and Leaders Up to 12 nutrition educators working

333

Autosub missions beneath Polar Ice: Preparation and Experience  

E-Print Network [OSTI]

Autosub missions beneath Polar Ice: Preparation and Experience Gwyn Griffiths Southampton, May 2004 #12;Autosub Polar Campaigns J 2001 - Krill distribution and sea ice thickness studies in the northern Weddell Sea (Brierley, Fernandes and Brandon). J 2003 - Sea ice thickness, Bellingshausen Sea

Griffiths, Gwyn

334

Sixth annual coal preparation, utilization, and environmental control contractors conference  

SciTech Connect (OSTI)

A conference was held on coal preparation, utilization and environmental control. Topics included: combustion of fuel slurries; combustor performance; desulfurization chemically and by biodegradation; coal cleaning; pollution control of sulfur oxides and nitrogen oxides; particulate control; and flue gas desulfurization. Individual projects are processed separately for the databases. (CBS).

Not Available

1990-01-01T23:59:59.000Z

335

Anomalous Phase Inversion in Polymer Blends Prepared by Cryogenic Mechanical  

E-Print Network [OSTI]

, as well as interpenetrating and bicontinu- ous networks.7,8 Phase inversion occurs when the mi- norityAnomalous Phase Inversion in Polymer Blends Prepared by Cryogenic Mechanical Alloying Archie P strategies for producing highly dis- persed multicomponent polymer blends. By their very nature

336

Preparation of .alpha., .beta.-unsaturated carboxylic acids and anhydrides  

DOE Patents [OSTI]

Disclosed is a process for the preparation of .alpha.,.beta.-unsaturated carboxylic acids and anhydrides thereof which comprises contacting formaldehyde or a source of formaldehyde with a carboxylic anhydride in the presence of a catalyst comprising mixed oxides of vanadium, phosphorus and, optionally, a third component selected from titanium, aluminum or, preferably silicon.

Spivey, James Jerry (Cary, NC); Gogate, Makarand Ratnakav (Durham, NC); Zoeller, Joseph Robert (Kingsport, TN); Tustin, Gerald Charles (Kingsport, TN)

1998-01-01T23:59:59.000Z

337

Preparation of .alpha.,.beta.-unsaturated carboxylic acids and esters  

DOE Patents [OSTI]

Disclosed is a process for the preparation of .alpha.,.beta.-unsaturated carboxylic acids and esters thereof which comprises contacting formaldehyde or a source of formaldehyde with a carboxylic acid, ester or anhydride in the presence of a catalyst comprising an oxide of niobium.

Gogate, Makarand Ratnakar (Durham, NC); Spivey, James Jerry (Cary, NC); Zoeller, Joseph Robert (Kingsport, TN)

1998-01-01T23:59:59.000Z

338

Squalane and isosqualane compositions and methods for preparing the same  

DOE Patents [OSTI]

Provided herein are methods comprising catalytic dimerization of .beta.-farnesene to obtain squalane and/or isosqualane. Compositions comprising squalane and/or isosqualane are provided. In certain embodiments, squalane and isosqualane prepared by the methods provided herein can be useful for applications in cosmetic industry and/or in the lubricants industry.

Fisher, Karl; Schofer, Susan Jessica; Kanne, David B

2013-11-19T23:59:59.000Z

339

Preparation of 3,3'-diamino-4,4'-azofurazan  

DOE Patents [OSTI]

A method of preparing 3,3'-diamino-4,4'-azofurazan is provided together with a composition of matter including a mixture of 3,3'-diamino-4,4'-azofurazan and 1,3,5-triamino-2,4,6-trinitrobenzene.

Hiskey, Michael A. (Los Alamos, NM); Chavez, David E. (Ranchos de Taos, NM); Bishop, Robert L. (Santa Fe, NM); Kramer, John F. (Santa Fe, NM); Kinkead, Scott A. (Los Alamos, NM)

2003-04-22T23:59:59.000Z

340

Preparation and characterization of low-defect surfaces  

SciTech Connect (OSTI)

Silver crystal surfaces with low defect densities were prepared electrochemically from aqueous solutions using capillary-growth techniques. These surfaces had low rates for the nucleation of new silver layers. The impedance of these inert silver/aqueous silver nitrate interfaces was used to determine silver adatom concentration and water dipole reorientation energetics.

Robinson, T.O.

1991-12-01T23:59:59.000Z

Note: This page contains sample records for the topic "addthis remarks prepared" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

A Suggested Format for Preparing a Thesis/Project Proposal  

E-Print Network [OSTI]

completion of the thesis/project and graduation of the student. The proposal should address the items's graduation plans? For any further guidance in this regard, the student must contact his/her Thesis/ProjectA Suggested Format for Preparing a Thesis/Project Proposal A thesis/project proposal must

Ravikumar, B.

342

Data Update for Mt. Tom, Holyoke, MA Prepared for  

E-Print Network [OSTI]

Data Update for Mt. Tom, Holyoke, MA June 2005 Prepared for Massachusetts Technology Collaborative 75 North Drive, Westborough, MA 01581 By Melissa Ray Monthly Data Summary for June 2005 This update summarizes the monthly data results for the Mt. Tom monitoring site in Holyoke, MA, at 42 14' 59.2" N, 72

Massachusetts at Amherst, University of

343

Data Update for Mt. Tom, Holyoke, MA Prepared for  

E-Print Network [OSTI]

Data Update for Mt. Tom, Holyoke, MA May 2007 Prepared for Massachusetts Technology Collaborative 75 North Drive, Westborough, MA 01581 By Puneet Malhotra Monthly Data Summary for May 2007 This update summarizes the monthly data results for the Mt. Tom monitoring site in Holyoke, MA, at 42 14' 59

Massachusetts at Amherst, University of

344

Data Update for Mt. Tom, Holyoke, MA Prepared for  

E-Print Network [OSTI]

Data Update for Mt. Tom, Holyoke, MA July 2007 Prepared for Massachusetts Technology Collaborative 75 North Drive, Westborough, MA 01581 By Puneet Malhotra Monthly Data Summary for July 2007 This update summarizes the monthly data results for the Mt. Tom monitoring site in Holyoke, MA, at 42 14' 59

Massachusetts at Amherst, University of

345

Data Update for Mt. Tom, Holyoke, MA Prepared for  

E-Print Network [OSTI]

Data Update for Mt. Tom, Holyoke, MA July 2006 Prepared for Massachusetts Technology Collaborative 75 North Drive, Westborough, MA 01581 By Melissa Elkinton Monthly Data Summary for July 2006 This update summarizes the monthly data results for the Mt. Tom monitoring site in Holyoke, MA, at 42 14' 59

Massachusetts at Amherst, University of

346

Data Update for Mt. Tom, Holyoke, MA Prepared for  

E-Print Network [OSTI]

Data Update for Mt. Tom, Holyoke, MA July 2005 Prepared for Massachusetts Technology Collaborative 75 North Drive, Westborough, MA 01581 By Melissa Ray Monthly Data Summary for July 2005 This update summarizes the monthly data results for the Mt. Tom monitoring site in Holyoke, MA, at 42 14' 59.2" N, 72

Massachusetts at Amherst, University of

347

Data Update for Mt. Tom, Holyoke, MA Prepared for  

E-Print Network [OSTI]

Data Update for Mt. Tom, Holyoke, MA March 2007 Prepared for Massachusetts Technology Collaborative 75 North Drive, Westborough, MA 01581 By Puneet Malhotra Monthly Data Summary for March 2007 This update summarizes the monthly data results for the Mt. Tom monitoring site in Holyoke, MA, at 42 14' 59

Massachusetts at Amherst, University of

348

Data Update for Mt. Tom, Holyoke, MA Prepared for  

E-Print Network [OSTI]

Data Update for Mt. Tom, Holyoke, MA May 2006 Prepared for Massachusetts Technology Collaborative 75 North Drive, Westborough, MA 01581 By Melissa Ray Monthly Data Summary for May 2006 This update summarizes the monthly data results for the Mt. Tom monitoring site in Holyoke, MA, at 42 14' 59.2" N, 72

Massachusetts at Amherst, University of

349

Data Update for Mt. Tom, Holyoke, MA Prepared for  

E-Print Network [OSTI]

Data Update for Mt. Tom, Holyoke, MA April 2007 Prepared for Massachusetts Technology Collaborative 75 North Drive, Westborough, MA 01581 By Puneet Malhotra Monthly Data Summary for April 2007 This update summarizes the monthly data results for the Mt. Tom monitoring site in Holyoke, MA, at 42 14' 59

Massachusetts at Amherst, University of

350

Data Update for Mt. Tom, Holyoke, MA Prepared for  

E-Print Network [OSTI]

Data Update for Mt. Tom, Holyoke, MA June 2007 Prepared for Massachusetts Technology Collaborative 75 North Drive, Westborough, MA 01581 By Puneet Malhotra Monthly Data Summary for June 2007 This update summarizes the monthly data results for the Mt. Tom monitoring site in Holyoke, MA, at 42 14' 59

Massachusetts at Amherst, University of

351

Data Update for Mt. Tom, Holyoke, MA Prepared for  

E-Print Network [OSTI]

Data Update for Mt. Tom, Holyoke, MA April 2008 Prepared for Massachusetts Technology Collaborative 75 North Drive, Westborough, MA 01581 By Puneet Malhotra Monthly Data Summary for April 2008 This update summarizes the monthly data results for the Mt. Tom monitoring site in Holyoke, MA, at 42 14' 59

Massachusetts at Amherst, University of

352

Data Update for Mt. Tom, Holyoke, MA Prepared for  

E-Print Network [OSTI]

Data Update for Mt. Tom, Holyoke, MA March 2008 Prepared for Massachusetts Technology Collaborative 75 North Drive, Westborough, MA 01581 By Puneet Malhotra Monthly Data Summary for March 2008 This update summarizes the monthly data results for the Mt. Tom monitoring site in Holyoke, MA, at 42 14' 59

Massachusetts at Amherst, University of

353

Data Update for Mt. Tom, Holyoke, MA Prepared for  

E-Print Network [OSTI]

Data Update for Mt. Tom, Holyoke, MA June 2006 Prepared for Massachusetts Technology Collaborative 75 North Drive, Westborough, MA 01581 By Melissa Elkinton Monthly Data Summary for June 2006 This update summarizes the monthly data results for the Mt. Tom monitoring site in Holyoke, MA, at 42 14' 59

Massachusetts at Amherst, University of

354

Data Update for Mt. Tom, Holyoke, MA Prepared for  

E-Print Network [OSTI]

Data Update for Mt. Tom, Holyoke, MA April 2006 Prepared for Massachusetts Technology Collaborative 75 North Drive, Westborough, MA 01581 By Melissa Ray Monthly Data Summary for April 2006 This update summarizes the monthly data results for the Mt. Tom monitoring site in Holyoke, MA, at 42 14' 59.2" N, 72

Massachusetts at Amherst, University of

355

Data Update for Mt. Tom, Holyoke, MA Prepared for  

E-Print Network [OSTI]

Data Update for Mt. Tom, Holyoke, MA March 2006 Prepared for Massachusetts Technology Collaborative 75 North Drive, Westborough, MA 01581 By Melissa Ray Monthly Data Summary for March 2006 This update summarizes the monthly data results for the Mt. Tom monitoring site in Holyoke, MA, at 42 14' 59.2" N, 72

Massachusetts at Amherst, University of

356

Data Update for Mt. Tom, Holyoke, MA Prepared for  

E-Print Network [OSTI]

Data Update for Mt. Tom, Holyoke, MA May 2008 Prepared for Massachusetts Technology Collaborative 75 North Drive, Westborough, MA 01581 By Puneet Malhotra Monthly Data Summary for May 2008 This update summarizes the monthly data results for the Mt. Tom monitoring site in Holyoke, MA, at 42 14' 59

Massachusetts at Amherst, University of

357

Fluorinated epoxides 6. Chemoselectivity in the preparation of  

E-Print Network [OSTI]

to allyl acetate) and fluorinated iodohydrin (CF3)2CFCH2CHICH2OH (2) (prepared from 1) were converted with allyl acetate [13­16] followed by epoxide formation. In contrast to the former report [9], we have found and iodohydrin 2 The dibenzoyl peroxide (DBP) induced addition of perfluoroisopropyl iodide to allyl acetate

Cirkva, Vladimir

358

Ganoderma in South Africa Article prepared by Dr Martin Coetzee  

E-Print Network [OSTI]

Ganoderma in South Africa Article prepared by Dr Martin Coetzee Ganoderma is a genus of wood-wide. In South Africa, a number of Ganoderma species have been reported from various indigenous and introduced linked with this disease in South Africa are G. lucidum and G. applinatum. It is known, however

359

Method for the preparation of ferrous low carbon porous material  

SciTech Connect (OSTI)

A method for preparing a porous metal article using a powder metallurgy forming process is provided which eliminates the conventional steps associated with removing residual carbon. The method uses a feedstock that includes a ferrous metal powder and a polycarbonate binder. The polycarbonate binder can be removed by thermal decomposition after the metal article is formed without leaving a carbon residue.

Miller, Curtis Jack

2014-05-27T23:59:59.000Z

360

Data Preparation Process for the Buildings Performance Database  

E-Print Network [OSTI]

LBNL-6724E Data Preparation Process for the Buildings Performance Database Claudine Y. Custodio Performance Database (BPD) includes empirically measured data from a variety of data sources with varying data quality within the database and to ensure that all database entries have sufficient data

Note: This page contains sample records for the topic "addthis remarks prepared" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Keith E. Woeste, Ph.D. a. Professional Preparation  

E-Print Network [OSTI]

Keith E. Woeste, Ph.D. a. Professional Preparation B.S. Botany 1980 University of Florida M, Davis, CA Ph.D. Genetics 1995 University of California, Davis, CA Post-doctoral Studies 1995 ­ 1998 4157 USDA Forest Service North Central Research Station Hardwood Tree Improvement and Regeneration

362

Timely Delivery of Laser Inertial Fusion Energy Presentation prepared for  

E-Print Network [OSTI]

plant design · Delivery soon enough to make a difference to global energy imperatives. · Design basedTimely Delivery of Laser Inertial Fusion Energy Presentation prepared for Town Hall meeting must directly address the end-user requirement for commercial power 3 Plant Primary Criteria (partial

363

White Salmon Subbasin Plan Prepared for the Northwest Power and  

E-Print Network [OSTI]

#12;i White Salmon Subbasin Plan 5/28/2004 Prepared for the Northwest Power and Conservation Rawding, Washington Department of Fish and Wildlife Wildlife Heather Simmons-Rigdon, Yakama Nation White Nation, Steve VanderPloeg, WDFW, Lee VanTussenbrook, WDFW, and Joe Zendt, Yakama Nation White Salmon

364

White Salmon Subbasin Plan Prepared for the Northwest Power and  

E-Print Network [OSTI]

#12;White Salmon Subbasin Plan 5/28/2004 Prepared for the Northwest Power and Conservation Council Rawding, Washington Department of Fish and Wildlife Wildlife Heather Simmons-Rigdon, Yakama Nation White Nation, Steve VanderPloeg, WDFW, Lee VanTussenbrook, WDFW, and Joe Zendt, Yakama Nation White Salmon

365

Preparation and characterization of TL-based superconducting thin films  

E-Print Network [OSTI]

A simple method for growth of Tl-based superconducting thin films is described. In this method, the precursor was prepared in a vacuum chamber by deposition of Ba, Ca and Cu metals or a Ba-Ca alloy and Cu metal. The precursor was then oxidized...

Wang, Pingshu

1995-01-01T23:59:59.000Z

366

Land Acquisition Prepared by: Ben Floyd, Economic & Engineering Services  

E-Print Network [OSTI]

Land Acquisition Prepared by: Ben Floyd, Economic & Engineering Services May 2004 Introduction Land taxpayer pockets"), and require no specific economic return to justify the expenditure. · There is also a general perception that long-term negative economic impacts may result if additional lands are taken out

367

DIOXIN CASE STUDY Prepared in Conjunction with the  

E-Print Network [OSTI]

DIOXIN CASE STUDY Prepared in Conjunction with the Commission for Environmental Cooperation;1 Case Study Dioxin Authors: Mark Cohen, CBNS, Queens College, Flushing, NY, USA Barry Commoner, CBNS Importance of Dioxin Exposure from Different Foods 17 Figure 3. Exposure to PCDD/F's: Food Consumption vs

368

Preparation of U.sub.3 O.sub.8  

DOE Patents [OSTI]

A method is described for the preparation of U.sub.3 O.sub.8 nuclear fuel material by direct precipitation of uranyl formate monohydrate from uranyl nitrate solution. The uranyl formate monohydrate precipitate is removed, dried and calcined to produce U.sub.3 O.sub.8 having a controlled particle size distribution.

Johnson, David R. (Aiken, SC)

1980-01-01T23:59:59.000Z

369

Geosynthetics in Landfills Prepared by M. Bouazza and J. Zornberg  

E-Print Network [OSTI]

; · geosynthetic clay liners (GCLs), which are composite materials consisting of bentonite and geosynthetics and a #12;geomembrane/compacted clay liner composite as the secondary liner system. The leak detectionGeosynthetics in Landfills Prepared by M. Bouazza and J. Zornberg Geosynthetics are extensively

Zornberg, Jorge G.

370

Preparation of {alpha},{beta}-unsaturated carboxylic acids and esters  

DOE Patents [OSTI]

Disclosed is a process for the preparation of {alpha},{beta}-unsaturated carboxylic acids and esters thereof which comprises contacting formaldehyde or a source of formaldehyde with a carboxylic acid, ester or anhydride in the presence of a catalyst comprising an oxide of niobium.

Gogate, M.R.; Spivey, J.J.; Zoeller, J.R.

1998-09-15T23:59:59.000Z

371

PETROLEUM ENGINEERING With an international reputation for preparing students for  

E-Print Network [OSTI]

PETROLEUM ENGINEERING With an international reputation for preparing students for successful entry into the petroleum industry, the graduate program in petroleum engineering at Texas Tech gives students a competitive design, and petroleum engineering software. The department is located in a geographical area

Gelfond, Michael

372

Future STEM Leaders Prepare for the National Science Bowl  

ScienceCinema (OSTI)

Each year, students from across the country converge on Washington, DC, for the National Science Bowl, an intense academic competition that tests the students' knowledge in science, engineering, chemistry, math and Earth science. Follow one team, from Washington DC's Woodrow Wilson High School, as they prepare for and compete in the 2014 National Science Bowl.

Benjamin, Angela

2014-09-15T23:59:59.000Z

373

Healthcare MBA Prepare to Find Healthcare Management Solutions  

E-Print Network [OSTI]

.5 Macroeconomics for the Global Economy 1.5 International Management 1.5 Management of Information Systems 1 and Healthcare 1.5 Disaster Management in Healthcare Organizations 1.5 Quality and Performance Improvement 1Healthcare MBA onLine #12;Prepare to Find Healthcare Management Solutions Healthcare is changing

Vertes, Akos

374

FEEDING POULTRY WASTES TO CATTLE PREPARED BY: JOSEPH P. FONTENOT  

E-Print Network [OSTI]

FEEDING POULTRY WASTES TO CATTLE PREPARED BY: JOSEPH P. FONTENOT DEPARTMENT OF ANIMAL AND POULTRY Animal Wastes in Canada Economic Considerations of Feeding Animal Wastes Practical Feeding of Poultry Litter 23 Literature Cited 26 Page 1 4 6 11 13 13 15 18 19 21 21 Appendix 37 #12;FEEDING POULTRY WASTES

375

Europium-doped yttrium silicate nanophosphors prepared by flame synthesis  

E-Print Network [OSTI]

Europium-doped yttrium silicate nanophosphors prepared by flame synthesis Xiao Qin a,*, Yiguang Ju; accepted 7 November 2006 Available online 22 December 2006 Abstract Europium-doped yttrium silicate (Y2SiO5 properties 1. Introduction Yttrium silicate (Y2SiO5) is an important luminescent host material for various

Bernhard, Stefan

376

Preparation and Properties of Recycled HDPE/Clay Hybrids  

E-Print Network [OSTI]

on recycled high density poly- ethylene (RHDPE) and organic clay were made by melt com- pounding; recycling INTRODUCTION Plastics account for an increasing fraction of municipal solid waste around the worldPreparation and Properties of Recycled HDPE/Clay Hybrids Yong Lei,1 Qinglin Wu,1 Craig M. Clemons2

377

(Levitation Trains) Prepared for Dr. Husain M. Masoudi  

E-Print Network [OSTI]

(Levitation Trains) Prepared for Dr. Husain M. Masoudi Electrical Engineering Department(EE 340 and historical information about magnetic or maglev train. This is followed by discussing the technology used in the train and its purpose. Figure1.(a demo of magnetic levitation train in museum in Chinghai) I

Masoudi, Husain M.

378

Fuel Cell Vehicles and Hydrogen in Preparing for market launch  

E-Print Network [OSTI]

Fuel Cell Vehicles and Hydrogen in California Preparing for market launch Catherine Dunwoody June 27, 2012 #12;2 A fuel cell vehicle is electric! 2 · 300-400 mile range · Zero-tailpipe emissions · To launch market and build capacity #12;12 H2 stations and vehicle growth #12;13 California Fuel Cell

California at Davis, University of

379

Preparing Non-nuclear Engineers for the Nuclear Field  

E-Print Network [OSTI]

Preparing Non-nuclear Engineers for the Nuclear Field Elizabeth K. Ervin The University. An understanding of power generation is important for all modern-day engineers, and nuclear energy serves as a good-four universities have nuclear- related programs, including Nuclear or Radiological Engineering, Nuclear Science

Ervin, Elizabeth K.

380

PREPARING FOR YOUR CONDUCT APPEAL PURPOSE OF THE APPEAL PROCESS  

E-Print Network [OSTI]

PREPARING FOR YOUR CONDUCT APPEAL 9/15/11 PURPOSE OF THE APPEAL PROCESS The purpose of the appeal process is to ensure that students who engage in the University of Vermont's conduct process, through in and are treated fairly in this process. The appeal process is not a rehearing of the original conduct case

Hayden, Nancy J.

Note: This page contains sample records for the topic "addthis remarks prepared" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Denaturing Urea PAGE -Large Gel Preparation of Glass Plates  

E-Print Network [OSTI]

for short glass plate. Wear gloves. 3. Place long glass plate on 2 foam rectangles. Set up spacers and short32 Denaturing Urea PAGE - Large Gel Preparation of Glass Plates 1. Clean glass plates and comb pipette, add 5 drops of dichlorodimethylsilane (Aldrich D6,082-6) to 5 mls of acetone in diposable glass

Aris, John P.

382

Document prepared 1/8/09 The Department of Biology  

E-Print Network [OSTI]

Document prepared 1/8/09 The Department of Biology Comprehensive Feasibility of Dissertation to this document. Distribute the proposal to the committee 1-2 weeks prior to the meeting. Obtain a copy Administrative Assistant. The Oral Exam: Comprehensive exams are managed by the student's thesis committee

Crews, Stephen

383

Preparation and X-Ray diffraction studies of curium hydrides  

SciTech Connect (OSTI)

Curium hydrides were prepared by reaction of curium-248 metal with hydrogen and characterized by X-ray powder diffraction. Several of the syntheses resulted in a hexagonal compound with average lattice parameters of a/sub 0/ = 0.3769(8) nm and c/sub 0/ = 0.6732(12) nm. These products are considere to be CmH/sub 3//sup -//sub 8/ by analogy with the behavior of lanthanide-hydrogen and lighter actinide-hydrogen systems. Face-centered cubic products with an average lattice parameter of a/sub 0/ = 0.5322(4) nm were obtained from other curium hydride preparations. This parameter is slightly smaller than that reported previously for cubic curium dihydride, CmH /SUB 2-x/ (B.M. Bansal and D. Damien. Inorg. Nucl. Chem. Lett. 6 603, 1970). The present results established a continuation of typical heavy trivalent lanthanidelike behavior of the transuranium actinide-hydrogen systems through curium.

Gibson, J.K.; Maire, R.G.

1985-10-01T23:59:59.000Z

384

Porous metal hydride composite and preparation and uses thereof  

DOE Patents [OSTI]

A composite formed from large pieces of aggregate formed from (1) metal hydride (or hydride-former) powder and (2) either metal powder or plastic powder or both is prepared. The composite has large macroscopic interconnected pores (much larger than the sizes of the powders which are used) and will have a very fast heat transfer rate and low windage loss. It will be useful, for example, in heat engines, hydrogen storage devices, and refrigerator components which depend for their utility upon both a fast rate of hydriding and dehydriding. Additionally, a method of preparing the composite and a method of increasing the rates of hydriding and dehydriding of metal hydrides are also given.

Steyert, William A. (Los Alamos, NM); Olsen, Clayton E. (Los Alamos, NM)

1982-01-01T23:59:59.000Z

385

Fluidics platform and method for sample preparation and analysis  

DOE Patents [OSTI]

Herein provided are fluidics platform and method for sample preparation and analysis. The fluidics platform is capable of analyzing DNA from blood samples using amplification assays such as polymerase-chain-reaction assays and loop-mediated-isothermal-amplification assays. The fluidics platform can also be used for other types of assays and analyzes. In some embodiments, a sample in a sealed tube can be inserted directly. The following isolation, detection, and analyzes can be performed without a user's intervention. The disclosed platform may also comprises a sample preparation system with a magnetic actuator, a heater, and an air-drying mechanism, and fluid manipulation processes for extraction, washing, elution, assay assembly, assay detection, and cleaning after reactions and between samples.

Benner, W. Henry; Dzenitis, John M.; Bennet, William J.; Baker, Brian R.

2014-08-19T23:59:59.000Z

386

Process for preparing zinc oxide-based sorbents  

DOE Patents [OSTI]

The disclosure relates to zinc oxide-based sorbents, and processes for preparing and using them. The sorbents are preferably used to remove one or more reduced sulfur species from gas streams. The sorbents comprise an active zinc component, optionally in combination with one or more promoter components and/or one or more substantially inert components. The active zinc component is a two phase material, consisting essentially of a zinc oxide (ZnO) phase and a zinc aluminate (ZnAl.sub.2O.sub.4) phase. Each of the two phases is characterized by a relatively small crystallite size of typically less than about 500 Angstroms. Preferably the sorbents are prepared by converting a precursor mixture, comprising a precipitated zinc oxide precursor and a precipitated aluminum oxide precursor, to the two-phase, active zinc oxide containing component.

Gangwal, Santosh Kumar (Cary, NC); Turk, Brian Scott (Durham, NC); Gupta, Raghubir Prasad (Durham, NC)

2011-06-07T23:59:59.000Z

387

Porous metal hydride composite and preparation and uses thereof  

DOE Patents [OSTI]

A composite formed from large pieces of aggregate formed from (1) metal hydride (or hydride-former) powder and (2) either metal powder or plastic powder or both is prepared. The composite has large macroscopic interconnected pores (much larger than the sizes of the powders which are used) and will have a very fast heat transfer rate and low windage loss. It will be useful, for example, in heat engines, hydrogen storage devices, and refrigerator components which depend for their utility upon both a fast rate of hydriding and dehydriding. Additionally, a method of preparing the composite and a method of increasing the rates of hydriding and dehydriding of metal hydrides are also given.

Steyert, W.A.; Olsen, C.E.

1980-03-12T23:59:59.000Z

388

Targets and methods for target preparation for radionuclide production  

DOE Patents [OSTI]

The invention relates to nuclear technology, and to irradiation targets and their preparation. One embodiment of the present invention includes a method for preparation of a target containing intermetallic composition of antimony Ti--Sb, Al--Sb, Cu--Sb, or Ni--Sb in order to produce radionuclides (e.g., tin-117 m) with a beam of accelerated particles. The intermetallic compounds of antimony can be welded by means of diffusion welding to a copper backing cooled during irradiation on the beam of accelerated particles. Another target can be encapsulated into a shell made of metallic niobium, stainless steel, nickel or titanium cooled outside by water during irradiation. Titanium shell can be plated outside by nickel to avoid interaction with the cooling water.

Zhuikov, Boris L; Konyakhin, Nicolai A; Kokhanyuk, Vladimir M; Srivastava, Suresh C

2012-10-16T23:59:59.000Z

389

Method for preparing corrosion-resistant ceramic shapes  

DOE Patents [OSTI]

Ceramic shapes having impermeable tungsten coatings can be used for containing highly corrosive molten alloys and salts. The shapes are prepared by coating damp green ceramic shapes containing a small amount of yttria with a tungsten coating slip which has been adjusted to match the shrinkage rate of the green ceramic and which will fire to a theoretical density of at least 80% to provide a impermeable coating.

Arons, Richard M. (Wheaton, IL); Dusek, Joseph T. (Downers Grove, IL)

1983-09-13T23:59:59.000Z

390

Raw material preparation for ultra high production rate sintering  

SciTech Connect (OSTI)

An R and D program in pot grate sintering showed, that an intensive preparation of ores, additives and coke breeze improves the sintering capacity. The tests were conducted using an ore mixture composed of typical ores imported to Europe. The highest capacities were attained up to 63.8 t/m{sup 2} {times} 24 h maximum for a sinter which well fulfills the high requirements on chemical, physical and metallurgical properties.

Kortmann, H.A.; Ritz, V.J. [Studiengesellschaft fuer Eisenerzaufbereitung, Liebenburg-Othfresen (Germany); Cappel, F.; Weisel, H.; Richter, G. [LURGI AG, Frankfurt (Germany)

1995-12-01T23:59:59.000Z

391

Condensed phase preparation of 2,3-pentanedione  

DOE Patents [OSTI]

A condensed phase process for the preparation of purified 2,3-pentanedione from lactic acid and an alkali metal lactate is described. The process uses elevated temperatures between about 200.degree. to 360.degree. C. for heating a reaction mixture of lactic acid and an alkali metal lactate to produce the 2,3-pentanedione in a reaction vessel. The 2,3-pentanedione produced is vaporized from the reaction vessel and condensed with water.

Miller, Dennis J. (Okemos, MI); Perry, Scott M. (Beaumont, TX); Fanson, Paul T. (Stockbridge, MI); Jackson, James E. (Haslett, MI)

1998-01-01T23:59:59.000Z

392

Condensed phase preparation of 2,3-pentanedione  

DOE Patents [OSTI]

A condensed phase process for the preparation of purified 2,3-pentanedione from lactic acid and an alkali metal lactate is described. The process uses elevated temperatures between about 200 to 360 C for heating a reaction mixture of lactic acid and an alkali metal lactate to produce the 2,3-pentanedione in a reaction vessel. The 2,3-pentanedione produced is vaporized from the reaction vessel and condensed with water. 5 figs.

Miller, D.J.; Perry, S.M.; Fanson, P.T.; Jackson, J.E.

1998-11-03T23:59:59.000Z

393

Gel-forming reagents and uses thereof for preparing microarrays  

DOE Patents [OSTI]

New gel-forming reagents including monomers and cross-linkers, which can be applied to gel-drop microarray manufacturing by using co-polymerization approaches are disclosed. Compositions for the preparation of co-polymerization mixtures with new gel-forming monomers and cross-linker reagents are described herein. New co-polymerization compositions and cross-linkers with variable length linker groups between unsaturated C.dbd.C bonds that participate in the formation of gel networks are disclosed.

Golova, Julia (Burr Ridge, IL); Chernov, Boris (Burr Ridge, IL); Perov, Alexander (Woodridge, IL)

2010-11-09T23:59:59.000Z

394

Preparation of supported electrocatalyst comprising multiwalled carbon nanotubes  

DOE Patents [OSTI]

A process for preparing a durable non-precious metal oxygen reduction electrocatalyst involves heat treatment of a ball-milled mixture of polyaniline and multiwalled carbon nanotubes in the presence of a Fe species. The catalyst is more durable than catalysts that use carbon black supports. Performance degradation was minimal or absent after 500 hours of operation at constant cell voltage of 0.40 V.

Wu, Gang; Zelenay, Piotr

2013-08-27T23:59:59.000Z

395

Nano-structured polymer composites and process for preparing same  

DOE Patents [OSTI]

A process for preparing a polymer composite that includes reacting (a) a multi-functional monomer and (b) a block copolymer comprising (i) a first block and (ii) a second block that includes a functional group capable of reacting with the multi-functional monomer, to form a crosslinked, nano-structured, bi-continuous composite. The composite includes a continuous matrix phase and a second continuous phase comprising the first block of the block copolymer.

Hillmyer, Marc; Chen, Liang

2013-04-16T23:59:59.000Z

396

Adiabatic Preparation of a Heisenberg Antiferromagnet Using an Optical Superlattice  

E-Print Network [OSTI]

We analyze the possibility to prepare a Heisenberg antiferromagnet with cold fermions in optical lattices, starting from a band insulator and adiabatically changing the lattice potential. The numerical simulation of the dynamics in 1D allows us to identify the conditions for success, and to study the influence that the presence of holes in the initial state may have on the protocol. We also extend our results to two-dimensional systems.

Michael Lubasch; Valentin Murg; Ulrich Schneider; J. Ignacio Cirac; Mari-Carmen Bauls

2011-11-06T23:59:59.000Z

397

Adiabatic preparation of a Heisenberg antiferromagnet using an optical superlattice  

E-Print Network [OSTI]

We analyze the possibility to prepare a Heisenberg antiferromagnet with cold fermions in optical lattices, starting from a band insulator and adiabatically changing the lattice potential. The numerical simulation of the dynamics in 1D allows us to identify the conditions for success, and to study the influence that the presence of holes in the initial state may have on the protocol. We also extend our results to two-dimensional systems.

Lubasch, Michael; Schneider, Ulrich; Cirac, J Ignacio; Bauls, Mari-Carmen

2011-01-01T23:59:59.000Z

398

Method for preparing salt solutions having desired properties  

DOE Patents [OSTI]

The specification discloses a method for preparing salt solutions which exhibit desired thermodynamic properties. The method enables prediction of the value of the thermodynamic properties for single and multiple salt solutions over a wide range of conditions from activity data and constants which are independent of concentration and temperature. A particular application of the invention is in the control of salt solutions in a process to provide a salt solution which exhibits the desired properties.

Ally, Moonis R. (Oak Ridge, TN); Braunstein, Jerry (Clinton, TN)

1994-01-01T23:59:59.000Z

399

Data Preparation Process for the Buildings Performance Database |  

Energy Savers [EERE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Deliciouscritical_materials_workshop_presentations.pdfSTD-1040-93DecemberofDepartment of Energy Preparation Process

400

Method of preparing nuclear wastes for tansportation and interim storage  

DOE Patents [OSTI]

Nuclear waste is formed into a substantially water-insoluble solid for temporary storage and transportation by mixing the calcined waste with at least 10 weight percent powdered anhydrous sodium silicate to form a mixture and subjecting the mixture to a high humidity environment for a period of time sufficient to form cementitious bonds by chemical reaction. The method is suitable for preparing an interim waste form from dried high level radioactive wastes.

Bandyopadhyay, Gautam (Naperville, IL); Galvin, Thomas M. (Darien, IL)

1984-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "addthis remarks prepared" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Preparation for Early Termination of Ignalina NPP Operation  

SciTech Connect (OSTI)

Seimas (Parliament of Lithuania) approved updated National Energy strategy where it is indicated that first Unit will be shutdown before the year 2005 and second Unit in 2009 if funding for decommissioning is available from EU and other donors. In accordance to Ignalina NPP Unit 1 Closure Law the Government of Lithuania approved the Ignalina NPP Unit 1 Decommissioning Program until year 2005. For enforcement of this program, the plan of measures for implementation of the program was prepared and approved by the Minister of Economy. The plan consists of two parts, namely technical- environmental and social-economic. Technical-environmental measures are mostly oriented to the safe management of spent nuclear fuel and operational radioactive waste stored at the plant and preparation of licensing documents for Unit 1 decommissioning. Social-economic measures are oriented to mitigate negative social and economic impact on Lithuania, inhabitants of the region, and, particularly, o n the staff of Ignalina NPP by means of creating favorable conditions for a balanced social and economic development of the region. In this paper analysis of planned activities, licensing requirements for decommissioning, progress in preparation of the Final Decommissioning Plan is discussed.

Poskas, P.; Poskas, R.

2003-02-26T23:59:59.000Z

402

Cold Dissolved Saltcake Waste Simulant Development, Preparation, and Analysis  

SciTech Connect (OSTI)

CH2M HILL Hanford Group, Inc. is identifying and developing supplemental process technologies to accelerate the Hanford tank waste cleanup mission. Bulk vitrification, containerized grout, and steam reforming are three technologies under consideration for treatment of the radioactive saltcake wastes in 68 single-shell tanks. To support development and testing of these technologies, Pacific Northwest National Laboratory (PNNL) was tasked with developing a cold dissolved saltcake simulant formulation to be representative of an actual saltcake waste stream, preparing 25- and 100-L batches of the simulant, and analyzing the composition of the batches to ensure conformance to formulation targets. Lacking a defined composition for dissolved actual saltcake waste, PNNL used available tank waste composition information and an equilibrium chemistry model (Environmental Simulation Program [ESP{trademark}]) to predict the concentrations of analytes in solution. Observations of insoluble solids in initial laboratory preparations for the model-predicted formulation prompted reductions in the concentration of phosphate and silicon in the final simulant formulation. The analytical results for the 25- and 100-L simulant batches, prepared by an outside vendor to PNNL specifications, agree within the expected measurement accuracy ({approx}10%) of the target concentrations and are highly consistent for replicate measurements, with a few minor exceptions. In parallel with the production of the 2nd simulant batch (100-L), a 1-L laboratory control sample of the same formulation was carefully prepared at PNNL to serve as an analytical standard. The instrumental analyses indicate that the vendor prepared batches of solution adequately reflect the as-formulated simulant composition. In parallel with the simulant development effort, a nominal 5-M (molar) sodium actual waste solution was prepared at the Hanford Site from a limited number of tank waste samples. Because this actual waste solution w as also to be used for testing the supplemental treatment technologies, the modeled simulant formulation was predicated on the composite of waste samples used to prepare it. Subsequently, the actual waste solution was filtered and pretreated to remove radioactive cesium at PNNL and then analyzed using the same instrumentation and procedures applied to the simulant samples. The overall agreement of measured simulant and actual waste solution compositions is better than {+-}10% for the most concentrated species including sodium, nitrate, hydroxide, carbonate, and nitrite. While the magnitude of the relative difference in the simulant and actual waste composition is large (>20% difference) for a few analytes (aluminum, chromium, fluoride, potassium, and total organic carbon), the absolute differences in concentration are in general not appreciable. Our evaluation is that these differences in simulant and actual waste solutions should have a negligible impact on bulk vitrification and containerized grout process testing, while the impact of the low aluminum concentration on steam reforming is yet to be determined.

Rassat, Scot D.; Mahoney, Lenna A.; Russell, Renee L.; Bryan, Samuel A.; Sell, Rachel L.

2003-05-13T23:59:59.000Z

403

Effects of site preparation for afforestation on soil properties and greenhouse gas emission  

E-Print Network [OSTI]

Forest plantations in the UK are often established on seasonally waterlogged peaty gley soils which often require site preparation (drainage and mounding) to lower the water table and prepare planting positions. Substantial ...

Mojeremane, Witness

2009-01-01T23:59:59.000Z

404

Workshop on the preparation of climate change action plans. Workshop summary  

SciTech Connect (OSTI)

Over 130 participants from more than 27 countries shared experiences of developing and transition countries in preparation and development of their climate change national action plans. International experts guided countries in preparation of their climate change national action plans.

NONE

1999-05-24T23:59:59.000Z

405

EIS-0281: Notice of Intent to Prepare a Site-Wide Environmental...  

Office of Environmental Management (EM)

281: Notice of Intent to Prepare a Site-Wide Environmental Impact Statement EIS-0281: Notice of Intent to Prepare a Site-Wide Environmental Impact Statement Sandia National...

406

AUTOMATED, ACCURATE, AND INEXPENSIVE SOLUTION-PREPARATION ON A DIGITAL MICROFLUIDIC BIOCHIP*  

E-Print Network [OSTI]

AUTOMATED, ACCURATE, AND INEXPENSIVE SOLUTION- PREPARATION ON A DIGITAL MICROFLUIDIC BIOCHIP* Tao propose an electrowetting-based "digital" microfluidic biochip design for automated solution-crystallization application. Index Terms: Digital microfluidics, droplets, laboratory automation, sample preparation. I

Chakrabarty, Krishnendu

407

Effect Of Preparation Methods On The Performance Of Co/Al2O3...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Of Preparation Methods On The Performance Of CoAl2O3 Catalysts For Dry Reforming Of Methane. Effect Of Preparation Methods On The Performance Of CoAl2O3 Catalysts For Dry...

408

Evaluating the Effectiveness of Mathematics, Science, and Technology Teacher Preparation Academies in Texas  

E-Print Network [OSTI]

1 EVALUATING THE EFFECTIVENESS OF MATHEMATICS, SCIENCE, AND TECHNOLOGY TEACHER PREPARATION ACADEMIES IN TEXAS A Dissertation by DANIELLE BAIRRINGTON BROWN Submitted to the Office of Graduate Studies of Texas A&M University..., and Technology Teacher Preparation Academies in Texas Copyright 2011 Danielle Bairrington Brown 3 EVALUATING THE EFFECTIVENESS OF MATHEMATICS, SCIENCE, AND TECHNOLOGY TEACHER PREPARATION ACADEMIES IN TEXAS A Dissertation by DANIELLE...

Brown, Danielle Bairrington

2012-07-16T23:59:59.000Z

409

The Prepared Partner: Can a Video Game Teach Labor and Childbirth Support Techniques?  

E-Print Network [OSTI]

The Prepared Partner: Can a Video Game Teach Labor and Childbirth Support Techniques? Alexandra, we developed The Prepared Partner, an educational video game about labor and childbirth. Because The Prepared Partner is an online video game, it can be distributed to a much larger area and thereby can

California at Santa Cruz, University of

410

Process for preparing fine grain titanium carbide powder  

DOE Patents [OSTI]

A method for preparing finely divided titanium carbide powder in which an organotitanate is reacted with a carbon precursor polymer to provide an admixture of the titanium and the polymer at a molecular-level due to a crosslinking reaction between the organotitanate and the polymer. The resulting gel is dried, pyrolyzed to drive off volatile components and provide carbon. The resulting solids are then heated at an elevated temperature to convert the titanium and carbon to high-purity titanium carbide powder in a submicron size range.

Janey, Mark A. (Concord, TN)

1986-01-01T23:59:59.000Z

411

Process for preparing multilayer enzyme coating on a fiber  

DOE Patents [OSTI]

A process for preparing high stability, high activity biocatalytic materials is disclosed and processes for using the same. The process involves coating of a material or fiber with enzymes and enzyme aggregate providing a material or fiber with high biocatalytic activity and stability useful in heterogeneous environments. In one illustrative approach, enzyme "seeds" are covalently attached to polymer nanofibers followed by treatment with a reagent that crosslinks additional enzyme molecules to the seed enzymes forming enzyme aggregates thereby improving biocatalytic activity due to increased enzyme loading and enzyme stability. This approach creates a useful new biocatalytic immobilized enzyme system with potential applications in bioconversion, bioremediation, biosensors, and biofuel cells.

Kim, Jungbae (Richland, WA); Kwak, Ja Hun (Richland, WA); Grate, Jay W. (West Richland, WA)

2009-11-03T23:59:59.000Z

412

Method for the preparation of photochromic insulating crystals  

DOE Patents [OSTI]

A method for preparing reversible-photochromic magnesium oxide (MgO) crystals is disclosed. Single crystals of MgO doped with both lithium (Li) and nickel (Ni) are grown by a conventional arc fusion method. The as-grown crystals are characterized by an amber coloration. The crystals lose the amber coloration and become photochromic when they are thermochemically reduced by heating at temperatures greater then 1000/sup 0/K in a hydrogen atmosphere. Alternate irradiation with uv and visible light result in rejuvenation and bleaching of the amber coloration, respectively.

Abraham, M.M.; Boldu, J.L.; Chen, Y.; Orera, V.M.

1984-09-28T23:59:59.000Z

413

Methods for preparation of three-dimensional bodies  

DOE Patents [OSTI]

Processes for mechanically fabricating two and three-dimensional fibrous monolith composites include preparing a fibrous monolith filament from a core composition of a first powder material and a boundary material of a second powder material. The filament includes a first portion of the core composition surrounded by a second portion of the boundary composition. One or more filaments are extruded through a mechanically-controlled deposition nozzle onto a working surface to create a fibrous monolith composite object. The objects may be formed directly from computer models and have complex geometries.

Mulligan, Anthony C. (Tucson, AZ); Rigali, Mark J. (Carlsbad, NM); Sutaria, Manish P. (Malden, MA); Artz, Gregory J. (Tucson, AZ); Gafner, Felix H. (Tucson, AZ); Vaidyanathan, K. Ranji (Tucson, AZ)

2008-06-17T23:59:59.000Z

414

Method for preparing hydride configurations and reactive metal surfaces  

DOE Patents [OSTI]

A method for preparing highly hydrogen-reactive surfaces on metals which normally require substantial heating, high pressures, or an extended induction period, which involves pretreatment of said surfaces with either a non-oxidizing acid or hydrogen gas to form a hydrogen-bearing coating on said surfaces, and subsequently heating said coated metal in the absence of moisture and oxygen for a period sufficient to decompose said coating and cooling said metal to room temperature. Surfaces so treated will react almost instantaneously with hydrogen gas at room temperature and low pressure. The method is particularly applicable to uranium, thorium, and lanthanide metals.

Silver, Gary L. (Centerville, OH)

1988-08-16T23:59:59.000Z

415

Sample preparation and detection device for infectious agents  

DOE Patents [OSTI]

A sample preparation and analysis device which incorporates both immunoassays and PCR assays in one compact, field-portable microchip. The device provides new capabilities in fluid and particle control which allows the building of a fluidic chip with no moving parts, thus decreasing fabrication cost and increasing the robustness of the device. The device can operate in a true continuous (not batch) mode. The device incorporates magnetohydrodynamic (MHD) pumps to move the fluid through the system, acoustic mixing and fractionation, dielectropheretic (DEP) sample concentration and purification, and on-chip optical detection capabilities.

Miles, Robin R.; Wang, Amy W.; Fuller, Christopher K.; Lemoff, Asuncion V.; Bettencourt, Kerry A.; Yu, June

2003-06-10T23:59:59.000Z

416

Teachers take time to prepare for RoboRAVE  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security AdministrationcontrollerNanocrystallineForeign ObjectOUR8, 2013 FINALTatianaJeffersonTeachers Prepare

417

Preparing for the 2012 Nuclear Security Summit | National Nuclear Security  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas ConchasPassive Solar Home Design PassivePostdoctoralKanareykin,URobotsProcessPreparing for

418

Preparation for a Software Quality Audit, SQAS | Department of Energy  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 - SeptemberMicroneedles for medical point07.06 AgendaPreparation for a Software

419

Preparation of Surface Organometallic Catalysts by Gas-Phase Ligand  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 - SeptemberMicroneedles for medical point07.06 AgendaPreparation for aFatty

420

Preparation of homogeneous gold-silver alloy nanoparticles using the  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 - SeptemberMicroneedles for medical point07.06 AgendaPreparation for

Note: This page contains sample records for the topic "addthis remarks prepared" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Prepare for Winter with Energy Department Resources | Department of Energy  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 - SeptemberMicroneedles for medical point07.06 AgendaPreparation forTrioxide

422

Preparing the Nuclear Security Science Minds of Tomorrow | National Nuclear  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 - SeptemberMicroneedles for medical point07.06 AgendaPreparation

423

Data Preparation Process for the Buildings Performance Database  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:Year in Review: TopEnergy DOE Theory9-9260-2003OctoberLBNL-6724E Data Preparation Process for

424

Department of Energy Prepares for Hurricane Season | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:Year in Review: TopEnergy DOEDealing WithDevelopment ofNoPrepares for Hurricane Season

425

Y-12 plant prepares to separate lithium isotopes  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear SecurityTensile Strain Switched FerromagnetismWaste and MaterialsWenjun1ofRadiative1grows andlithium-6plant prepares

426

Local Leaders: Prepare for an Energy Emergency | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:Year in3.pdfEnergy Health andofIanJenniferLeslieEnergy Loan Loss ReserveSelected |Prepare

427

Method for the preparation of photochromic insulating crystals  

DOE Patents [OSTI]

A method for preparing reversible-photochromic magnesium oxide (MgO) crystals. Single crystals of MgO doped with both lithium (Li) and nickel (Ni) are grown by a conventional arc fusion method. The as-grown crystals are characterized by an amber coloration. The crystals lose the amber coloration and become photochromic when they are thermochemically reduced by heating at temperatures greater than 1000.degree. K. in a hydrogen atmosphere. Alternate irradiation with UV and visible light result in rejuvenation and bleaching of the amber coloration, respectively.

Abraham, Marvin M. (Oak Ridge, TN); Boldu, Jose L. (Mexico City, MX); Chen, Yok (Oak Ridge, TN); Orera, Victor M. (Zaragosa, ES)

1986-01-01T23:59:59.000Z

428

The Origins of Extinction  

E-Print Network [OSTI]

services' : [ {'service': 'facebook', 'id': 'pages/loading AddThis Sharing Facebook Twitter Email More OptionsAddThis Privacy Follow Hide Facebook Twitter Show AddThis

Petryna, Adriana

2013-01-01T23:59:59.000Z

429

The Noise of the World: The Apocalypse and the Crazy Farm Scenario  

E-Print Network [OSTI]

AddThis Privacy Follow Hide Facebook Twitter Show AddThisWhat's Next Follow on Facebook AddThis Hide Show Followservices' : [ {'service': 'facebook', 'id': 'pages/

Houdart, Sophie

2013-01-01T23:59:59.000Z

430

Method for preparing hydrous iron oxide gels and spherules  

DOE Patents [OSTI]

The present invention is directed to methods for preparing hydrous iron oxide spherules, hydrous iron oxide gels such as gel slabs, films, capillary and electrophoresis gels, iron monohydrogen phosphate spherules, hydrous iron oxide spherules having suspendable particles homogeneously embedded within to form composite sorbents and catalysts, iron monohydrogen phosphate spherules having suspendable particles of at least one different sorbent homogeneously embedded within to form a composite sorbent, iron oxide spherules having suspendable particles homogeneously embedded within to form a composite of hydrous iron oxide fiber materials, iron oxide fiber materials, hydrous iron oxide fiber materials having suspendable particles homogeneously embedded within to form a composite, iron oxide fiber materials having suspendable particles homogeneously embedded within to form a composite, dielectric spherules of barium, strontium, and lead ferrites and mixtures thereof, and composite catalytic spherules of barium or strontium ferrite embedded with oxides of Mg, Zn, Pb, Ce and mixtures thereof. These variations of hydrous iron oxide spherules and gel forms prepared by the gel-sphere, internal gelation process offer more useful forms of inorganic ion exchangers, catalysts, getters, dielectrics, and ceramics.

Collins, Jack L.; Lauf, Robert J.; Anderson, Kimberly K.

2003-07-29T23:59:59.000Z

431

Metathesis process for preparing an alpha, omega-functionalized olefin  

DOE Patents [OSTI]

A cross-metathesis process for preparing an .alpha.,.omega.-functionalized olefin, such as methyl 9-decenoate, and an .alpha.-olefin having three or more carbon atoms, such as 1-decene. The process involves contacting in a first reaction zone an .alpha.-functionalized internal olefin, such as methyl oleate, and an .alpha.-olefinic monomer having three or more carbon atoms, such as 1-decene, with a first metathesis catalyst to prepare an effluent stream containing the .alpha.,.omega.-functionalized olefin, such as methyl 9-decenoate, an unfunctionalized internal olefin, such as 9-octadecene, unconverted reactant olefins, and optionally, an .alpha.,.omega.-difunctionalized internal olefinic dimer, such as dimethyl 9-octadecen-1,18-dioate; separating said effluent streams; then contacting in a second reaction zone the unfunctionalized internal olefin with ethylene in the presence of a second metathesis catalyst to obtain a second product effluent containing the .alpha.-olefinic monomer having three or more carbon atoms; and cycling a portion of the .alpha.-olefinic monomer stream(s) to the first zone.

Burdett, Kenneth A. (Midland, MI); Mokhtarzadeh, Morteza (Charleston, WV); Timmers, Francis J. (Midland, MI)

2010-10-12T23:59:59.000Z

432

Preparation of environmental analyses for synfuel and unconventional gas technologies  

SciTech Connect (OSTI)

Government agencies that offer financial incentives to stimulate the commercialization of synfuel and unconventional gas technologies usually require an analysis of environmental impacts resulting from proposed projects. This report reviews potentially significant environmental issues associated with a selection of these technologies and presents guidance for developing information and preparing analyses to address these issues. The technologies considered are western oil shale, tar sand, coal liquefaction and gasification, peat, unconventional gas (western tight gas sands, eastern Devonian gas shales, methane from coal seams, and methane from geopressured aquifers), and fuel ethanol. Potentially significant issues are discussed under the general categories of land use, air quality, water use, water quality, biota, solid waste disposal, socioeconomics, and health and safety. The guidance provided in this report can be applied to preparation and/or review of proposals, environmental reports, environmental assessments, environmental impact statements, and other types of environmental analyses. The amount of detail required for any issue discussed must, by necessity, be determined on a case-by-case basis.

Reed, R.M. (ed.)

1982-09-01T23:59:59.000Z

433

Process for preparing a stabilized coal-water slurry  

DOE Patents [OSTI]

A process is described for preparing a stabilized coal particle suspension which includes the steps of providing an aqueous media substantially free of coal oxidizing constituents, reducing, in a nonoxidizing atmosphere, the particle size of the coal to be suspended to a size sufficiently small to permit suspension thereof in the aqueous media and admixing the coal of reduced particle size with the aqueous media to release into the aqueous media coal stabilizing constituents indigenous to and carried by the reduced coal particles in order to form a stabilized coal particle suspension. The coal stabilizing constituents are effective in a nonoxidizing atmosphere to maintain the coal particle suspension at essentially a neutral or alkaline pH. The coal is ground in a nonoxidizing atmosphere such as an inert gaseous atmosphere to reduce the coal to a sufficient particle size and is admixed with an aqueous media that has been purged of oxygen and acid-forming gases. 2 figs.

Givens, E.N.; Kang, D.

1987-06-23T23:59:59.000Z

434

Preparation Of Copper Indium Gallium Diselenide Films For Solar Cells  

DOE Patents [OSTI]

High quality thin films of copper-indium-gallium-diselenide useful in the production of solar cells are prepared by electrodepositing at least one of the constituent metals onto a glass/Mo substrate, followed by physical vapor deposition of copper and selenium or indium and selenium to adjust the final stoichiometry of the thin film to approximately Cu(In,Ga)Se.sub.2. Using an AC voltage of 1-100 KHz in combination with a DC voltage for electrodeposition improves the morphology and growth rate of the deposited thin film. An electrodeposition solution comprising at least in part an organic solvent may be used in conjunction with an increased cathodic potential to increase the gallium content of the electrodeposited thin film.

Bhattacharya, Raghu N. (Littleton, CO); Contreras, Miguel A. (Golden, CO); Keane, James (Lakewood, CO); Tennant, Andrew L. (Denver, CO), Tuttle, John R. (Denver, CO); Ramanathan, Kannan (Lakewood, CO); Noufi, Rommel (Golden, CO)

1998-08-08T23:59:59.000Z

435

Electrochemical process for the preparation of nitrogen fertilizers  

DOE Patents [OSTI]

The present invention provides methods and apparatus for the preparation of nitrogen fertilizers including ammonium nitrate, urea, urea-ammonium nitrate, and/or ammonia utilizing a source of carbon, a source of nitrogen, and/or a source of hydrogen. Implementing an electrolyte serving as ionic charge carrier, (1) ammonium nitrate is produced via the reduction of a nitrogen source at the cathode and the oxidation of a nitrogen source at the anode; (2) urea or its isomers are produced via the simultaneous cathodic reduction of a carbon source and a nitrogen source; (3) ammonia is produced via the reduction of nitrogen source at the cathode and the oxidation of a hydrogen source at the anode; and (4) urea-ammonium nitrate is produced via the simultaneous cathodic reduction of a carbon source and a nitrogen source, and anodic oxidation of a nitrogen source. The electrolyte can be solid.

Aulich, Ted R.; Olson, Edwin S.; Jiang, Junhua

2013-03-19T23:59:59.000Z

436

Apparatus for preparing a sample for mass spectrometry  

DOE Patents [OSTI]

An apparatus is described for preparing a sample for analysis by a mass spectrometer system. The apparatus has an entry chamber and an ionization chamber separated by a skimmer. A capacitor having two space-apart electrodes followed by one or more ion-imaging lenses is disposed in the ionization chamber. The chamber is evacuated and the capacitor is charged. A valve injects a sample gas in the form of sample pulses into the entry chamber. The pulse is collimated by the skimmer and enters the ionization chamber. When the sample pulse passes through the gap between the electrodes, it discharges the capacitor and is thereby ionized. The ions are focused by the imaging lenses and enter the mass analyzer, where their mass and charge are analyzed. 1 figures.

Villa-Aleman, E.

1994-05-10T23:59:59.000Z

437

Diamond-Silicon Carbide Composite And Method For Preparation Thereof  

DOE Patents [OSTI]

Fully dense, diamond-silicon carbide composites are prepared from ball-milled microcrystalline diamond/amorphous silicon powder mixture. The ball-milled powder is sintered (P=5-8 GPa, T=1400K-2300K) to form composites having high fracture toughness. A composite made at 5 GPa/1673K had a measured fracture toughness of 12 MPa.multidot.m.sup.1/2. By contrast, liquid infiltration of silicon into diamond powder at 5 GPa/1673K produces a composite with higher hardness but lower fracture toughness. X-ray diffraction patterns and Raman spectra indicate that amorphous silicon is partially transformed into nanocrystalline silicon at 5 GPa/873K, and nanocrystalline silicon carbide forms at higher temperatures.

Qian, Jiang (Los Alamos, NM); Zhao, Yusheng (Los Alamos, NM)

2005-09-06T23:59:59.000Z

438

Preparation and characterization of chiral metal-metal bonded compounds  

E-Print Network [OSTI]

(LL)2 Complexes. Reactio~ of Re2(02CCSHS)4012 rrith dPcp . Resolution of Optical Isomers of B-Mo C14(dpcp)2 2 Preparation of Rh2(02CCM3)4L2 ComPlexes. Physical Measurements. X-ray Crystallography. III RESULTS. 12 12 12 14 18 18 20 20 48... )] Positional and Isotropic Equivalent Thermal Parameters for Rh2(02CCH3)4[(R)-(+)-N(CH )2CH(CH )(C6H )]2 Anisotropic Temperature Factor s (B's) for Rh (0 CCH ) [(R)-(+)-N(CH 2CH CH C6H 47 LIST OF TABLES (continued) TABLE PAGE XVI Important Torsion Angles...

Gibson, Elaine Claire

1985-01-01T23:59:59.000Z

439

PHYSICAL PROPERTY MEASUREMENTS OF LABORATORY PREPARED SALTSTONE GROUT  

SciTech Connect (OSTI)

The Saltstone Production Facility (SPF) built two new Saltstone Disposal Units (SDU), SDU 3 and SDU 5, in 2013. The variable frequency drive (VFD) for the grout transfer hose pump tripped due to high current demand by the motor during the initial radioactive saltstone transfer to SDU 5B on 12/5/2013. This was not observed during clean cap processing on July 5, 2013 to SDU 3A, which is a slightly longer distance from the SPF than is SDU 5B. Saltstone Design Authority (SDA) is evaluating the grout pump performance and capabilities to transfer the grout processed in SPF to SDU 3/5. To assist in this evaluation, grout physical properties are required. At this time, there are no rheological data from the actual SPF so the properties of laboratory prepared samples using simulated salt solution or Tank 50 salt solution will be measured. The physical properties of grout prepared in the laboratory with de-ionized water (DI) and salt solutions were obtained at 0.60 and 0.59 water to premix (W/P) ratios, respectively. The yield stress of the DI grout was greater than any salt grout. The plastic viscosity of the DI grout was lower than all of the salt grouts (including salt grout with admixture). When these physical data were used to determine the pressure drop and fluid horsepower for steady state conditions, the salt grouts without admixture addition required a higher pressure drop and higher fluid horsepower to transport. When 0.00076 g Daratard 17/g premix was added, both the pressure drop and fluid horsepower were below that of the DI grout. Higher concentrations of Daratard 17 further reduced the pressure drop and fluid horsepower. The uncertainty in the single point Bingham Plastic parameters is + 4% of the reported values and is the bounding uncertainty. Two different mechanical agitator mixing protocols were followed for the simulant salt grout, one having a total mixing time of three minutes and the other having a time of 10 minutes. The Bingham Plastic parameters were essentially the same for the salt grout without admixture. When Daratard 17 was added, the Bingham Plastic yield stress increased for the 10 minute mix. The simulant salt used in this task had similar physical properties of the Tank 50 3Q13 salt grout and is recommended for future use, if the salt solution in Tank 50 does not change. The design basis physical properties used to size the pumps and mixers at SPF were obtained from DPST-85-312. The grouts characterized in this report are bounded by the design basis density and Bingham Plastic yield stress. The opposite is true for the plastic viscosity. Steady state pressure drop calculations were performed for the design basis values using the flow rate for the clean cap and salt grouts and they bound the pressure drop of the grouts characterized in this report. A comparison of the lab prepared samples to PI ProcessBook data, specifically average pressure drop, indicate that the lab prepared samples are more viscous in nature than what is processed in the facility. This difference could be due to the applied shear rates which could be lower in the lab as compared to the facility and that fact the SPF added flush water, making this comparison more difficult. A perfunctory review of the PI ProcessBook data was discussed. It may be possible that the frequency that the distributed control system alters the grout pump speed to maintain grout hopper volume can negatively affect the efficiency of the grout pump.

Hansen, E.; Cozzi, A.; Edwards, T.

2014-05-05T23:59:59.000Z

440

Boron-copper neutron absorbing material and method of preparation  

DOE Patents [OSTI]

A composite, copper clad neutron absorbing material is comprised of copper powder and boron powder enriched with boron 10. The boron 10 content can reach over 30 percent by volume, permitting a very high level of neutron absorption. The copper clad product is also capable of being reduced to a thickness of 0.05 to 0.06 inches and curved to a radius of 2 to 3 inches, and can resist temperatures of 900.degree. C. A method of preparing the material includes the steps of compacting a boron-copper powder mixture and placing it in a copper cladding, restraining the clad assembly in a steel frame while it is hot rolled at 900.degree. C. with cross rolling, and removing the steel frame and further rolling the clad assembly at 650.degree. C. An additional sheet of copper can be soldered onto the clad assembly so that the finished sheet can be cold formed into curved shapes.

Wiencek, Thomas C. (Bolingbrook, IL); Domagala, Robert F. (Indian Head Park, IL); Thresh, Henry (Palos Hts., IL)

1991-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "addthis remarks prepared" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

A simple procedure to prepare spherical {alpha}-alumina powders  

SciTech Connect (OSTI)

Spherical {alpha}-alumina powders were prepared by the controlled hydrolysis of aluminum isopropoxide in a hydrolysis system consisting of octanol and acetonitrile. Diverse solvents to dissolve reactant formed diverse hydrolysis systems and affected particle shape of {alpha}-alumina powders. The precursors crystallized to {gamma}-alumina at 1000 deg. C and converted to {alpha}-alumina at 1150 deg. C without intermediate phases. The particle morphology of precursor was retained after it crystallized to {alpha}-alumina. The heating rate influenced the particle shape and the state of agglomeration during calcination process. The thermal properties of the precursors were characterized by thermal gravimetric and differential thermal analysis. X-ray diffraction technique was used to confirm the conversion of crystalline phase of alumina powders from amorphous to {alpha}-phase. Transmission electron microscopy was used to investigate the morphologies and size of the precursors and products.

Liu Hongyu [State Key Laboratory of Fine Chemicals, Dalian University of Technology, Dalian 116012 (China); Ning Guiling [State Key Laboratory of Fine Chemicals, Dalian University of Technology, Dalian 116012 (China)], E-mail: ninggl@dlut.edu.cn; Gan Zhihong; Lin Yuan [State Key Laboratory of Fine Chemicals, Dalian University of Technology, Dalian 116012 (China)

2009-04-02T23:59:59.000Z

442

Method of preparing mercury with an arbitrary isotopic distribution  

DOE Patents [OSTI]

This invention provides for a process for preparing mercury with a predetermined, arbitrary, isotopic distribution. In one embodiment, different isotopic types of Hg[sub 2]Cl[sub 2], corresponding to the predetermined isotopic distribution of Hg desired, are placed in an electrolyte solution of HCl and H[sub 2]O. The resulting mercurous ions are then electrolytically plated onto a cathode wire producing mercury containing the predetermined isotopic distribution. In a similar fashion, Hg with a predetermined isotopic distribution is obtained from different isotopic types of HgO. In this embodiment, the HgO is dissolved in an electrolytic solution of glacial acetic acid and H[sub 2]O. The isotopic specific Hg is then electrolytically plated onto a cathode and then recovered. 1 fig.

Grossman, M.W.; George, W.A.

1986-12-16T23:59:59.000Z

443

Method of preparing mercury with an arbitrary isotopic distribution  

DOE Patents [OSTI]

This invention provides for a process for preparing mercury with a predetermined, arbitrary, isotopic distribution. In one embodiment, different isotopic types of Hg.sub.2 Cl.sub.2, corresponding to the predetermined isotopic distribution of Hg desired, are placed in an electrolyte solution of HCl and H.sub.2 O. The resulting mercurous ions are then electrolytically plated onto a cathode wire producing mercury containing the predetermined isotopic distribution. In a similar fashion, Hg with a predetermined isotopic distribution is obtained from different isotopic types of HgO. In this embodiment, the HgO is dissolved in an electrolytic solution of glacial acetic acid and H.sub.2 O. The isotopic specific Hg is then electrolytically plated onto a cathode and then recovered.

Grossman, Mark W. (Belmont, MA); George, William A. (Rockport, MA)

1986-01-01T23:59:59.000Z

444

Method for low temperature preparation of a noble metal alloy  

DOE Patents [OSTI]

A method for producing fine, essentially contamination free, noble metal alloys is disclosed. The alloys comprise particles in a size range of 5 to 500 nm. The method comprises 1. A method for preparing a noble metal alloy at low temperature, the method comprising the steps of forming solution of organometallic compounds by dissolving the compounds into a quantity of a compatible solvent medium capable of solvating the organometallic, mixing a portion of each solution to provide a desired molarity ratio of ions in the mixed solution, adding a support material, rapidly quenching droplets of the mixed solution to initiate a solute-solvent phase separation as the solvent freezes, removing said liquid cryogen, collecting and freezing drying the frozen droplets to produce a dry powder, and finally reducing the powder to a metal by flowing dry hydrogen over the powder while warming the powder to a temperature of about 150.degree. C.

Even, Jr., William R. (Livermore, CA)

2002-01-01T23:59:59.000Z

445

Preparation and gasification of a Thailand coal-water fuel  

SciTech Connect (OSTI)

In response to an inquiry by the Department of Mineral Resources (DMR) in Thailand, the Energy and Environmental Research Center (EERC) prepared a four-task program to assess the responsiveness of Wiang Haeng coal to the temperature and pressure conditions of hot-water drying (HWD). The results indicate that HWD made several improvements in the coal, notably increases in heating value and carbon content and reductions in equilibrium moisture and oxygen content. The equilibrium moisture content decreased from 37.4 wt% for the raw coal to about 20 wt% for the HWD coals. The energy density, determined at 500 cP, indicates an increase from 4450 to 6650 Btu/lb by hydrothermal treatment. Raw and HWD coal were then gasified at various mild gasification conditions of 700 C and 30 psig. The tests indicated that the coal is probably similar to other low-rank coals and will produce high levels of hydrogen and be fairly reactive.

Ness, R.O. Jr.; Anderson, C.M.; Musich, M.A.; Richter, J.J.; Dewall, R.A.; Young, B.C. [Univ. of North Dakota, Grand Forks, ND (United States). Energy and Environmental Research Center; Nakanart, A. [Ministry of Industry, Bangkok (Thailand)

1996-12-31T23:59:59.000Z

446

Preparation and characterization of boro-tellurite glasses  

SciTech Connect (OSTI)

Glass samples of the system: xB{sub 2}O{sub 3}?(100?x) TeO{sub 2}; x= 15, 20, 25 and 30 mol% were prepared by melt quenching and characterized by X-ray diffraction, density measurements, Differential Scanning Calorimetry and FTIR spectroscopy. XRD confirmed the amorphous structure of all samples. Density of glasses decreased with increase in B{sub 2}O{sub 3} concentration due to the replacement of heavier TeO{sub 2} with lighter B{sub 2}O{sub 3} whereas the glass transition temperature increased from 339C to 366C; the later effect was due to increase in the concentration of stronger B-O bonds in the glass network. FTIR studies found that BO{sub 4} units convert into BO{sub 3} with the addition of B{sub 2}O{sub 3}.

Kaur, Nirmal, E-mail: akphysics@yahoo.com; Khanna, Atul, E-mail: akphysics@yahoo.com [Glass Physics and Sensors Laboratory, Department of Physics, Guru Nanak Dev University, Amritsar-143005, Punjab (India); Krishna, P. S. R. [Solid State Physics Division, Bhabha Atomic Research Centre, Mumbai-400085, Maharashtra (India)

2014-04-24T23:59:59.000Z

447

Method for the preparation of radon-211. [Patent application  

DOE Patents [OSTI]

A method is claimed for the production of /sup 211/Rn which can be easily isolated from the target and obtained in high yields. It is claimed that the radioisotope /sup 211/Rn can be prepared by the bombardment of /sup 209/Bi with /sup 7/Li particles using the nuclear reaction /sup 209/Bi(/sup 7/Li,5n)/sup 211/Rn. The /sup 211/Rn can be isolated from the target quite easily by degassing at elevated temperatures and the radiochemical purity of the product is better than 98%. It can thus be used as a generator system for /sup 211/At which is of potential interest in biomedical applications. The excitation function for this reaction is about from 40 to 60 MeV and the cross section for /sup 211/Rn production reaches 650 mb at 53 MeV producing a saturation yield of 5.5 ..mu..Ci/nA.

Meyer, G.J.; Lambrecht, R.M.

1980-10-10T23:59:59.000Z

448

Simple, rapid method for the preparation of isotopically labeled formaldehyde  

DOE Patents [OSTI]

Isotopically labeled formaldehyde (*C.sup..sctn.H.sub.2O) is prepared from labeled methyl iodide (*C.sup..sctn.H.sub.3I) by reaction with an oxygen nucleophile having a pendant leaving group. The mild and efficient reaction conditions result in good yields of *C.sup..sctn.H.sub.2O with little or no *C isotopic dilution. The simple, efficient production of .sup.11CH.sub.2O is described. The use of the .sup.11CH.sub.2O for the formation of positron emission tomography tracer compounds is described. The reaction can be incorporated into automated equipment available to radiochemistry laboratories. The isotopically labeled formaldehyde can be used in a variety of reactions to provide radiotracer compounds for imaging studies as well as for scintillation counting and autoradiography.

Hooker, Jacob Matthew (Port Jefferson, NY); Schonberger, Matthias (Mains, DE); Schieferstein, Hanno (Aabergen, DE); Fowler, Joanna S. (Bellport, NY)

2011-10-04T23:59:59.000Z

449

Process for preparing a stabilized coal-water slurry  

DOE Patents [OSTI]

A process for preparing a stabilized coal particle suspension which includes the steps of providing an aqueous media substantially free of coal oxidizing constituents, reducing, in a nonoxidizing atmosphere, the particle size of the coal to be suspended to a size sufficiently small to permit suspension thereof in the aqueous media and admixing the coal of reduced particle size with the aqueous media to release into the aqueous media coal stabilizing constituents indigenous to and carried by the reduced coal particles in order to form a stabilized coal particle suspension. The coal stabilizing constituents are effective in a nonoxidizing atmosphere to maintain the coal particle suspension at essentially a neutral or alkaline pH. The coal is ground in a nonoxidizing atmosphere such as an inert gaseous atmosphere to reduce the coal to a sufficient particle size and is admixed with an aqueous media that has been purged of oxygen and acid-forming gases.

Givens, Edwin N. (Bethlehem, PA); Kang, Doohee (Macungie, PA)

1987-01-01T23:59:59.000Z

450

Californium-252: a remarkable versatile radioisotope  

SciTech Connect (OSTI)

A product of the nuclear age, Californium-252 ({sup 252}Cf) has found many applications in medicine, scientific research, industry, and nuclear science education. Californium-252 is unique as a neutron source in that it provides a highly concentrated flux and extremely reliable neutron spectrum from a very small assembly. During the past 40 years, {sup 252}Cf has been applied with great success to cancer therapy, neutron radiography of objects ranging from flowers to entire aircraft, startup sources for nuclear reactors, fission activation for quality analysis of all commercial nuclear fuel, and many other beneficial uses, some of which are now ready for further growth. Californium-252 is produced in the High Flux Isotope Reactor (HFIR) and processed in the Radiochemical Engineering Development Center (REDC), both of which are located at the Oak Ridge National Laboratory (ORNL) in Oak Ridge, Tennessee. The REDC/HFIR facility is virtually the sole supplier of {sup 252}Cf in the western world and is the major supplier worldwide. Extensive exploitation of this product was made possible through the {sup 252}Cf Market Evaluation Program, sponsored by the United States Department of Energy (DOE) [then the Atomic Energy Commission (AEC) and later the Energy Research and Development Administration (ERDA)]. This program included training series, demonstration centers, seminars, and a liberal loan policy for fabricated sources. The Market Evaluation Program was instituted, in part, to determine if large-quantity production capability was required at the Savannah River Laboratory (SRL). Because of the nature of the product and the means by which it is produced, {sup 252}Cf can be produced only in government-owned facilities. It is evident at this time that the Oak Ridge research facility can meet present and projected near-term requirements. The production, shipment, and sales history of {sup 252}Cf from ORNL is summarized herein.

Osborne-Lee, I.W.; Alexander, C.W.

1995-10-10T23:59:59.000Z

451

Opening Remarks, California Energy Commission Overview  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

C A L I F O R N I A E N E R G Y C O M M I S S I O N Hydrogen Energy Storage For Grid and Transportation Services Fernando Pina, Manager Energy Research and Development Division Jim...

452

Remarkable Teacher Raises Bar for Building Students  

Broader source: Energy.gov [DOE]

The Arizona teacher's expertise draws from technologies and strategies in residential efficiency and renewable energy developed through the Energy Departments Building America program. His class' first home generates more power than it uses.

453

Some remarks on black hole thermodynamics  

E-Print Network [OSTI]

Two thermodynamic "paradoxes" of black hole physics are re-examined. The first is that there is a thermal instability involving two coupled blackbody cavities containing two black holes, and second is that a classical black hole can swallow up entropy in the form of ambient blackbody photons without increasing its mass. The resolution of the second paradox by Bekenstein and by Hawking is re-visited. The link between Hawking radiation and Wigner's superluminal tunneling time is discussed using two equivalent Feynman diagrams, and Feynman's re-interpretation principle.

R. Y. Chiao

2011-02-04T23:59:59.000Z

454

Page 1 of 3 Convocation Remarks  

E-Print Network [OSTI]

-security -- Nasir Memon #12;Page 2 of 3 Advancing the smart grid -- Farshad Khorrami Developing the next and medical procedures Build intelligent cities here in the US and around the world In every case, you of NYU -- at NYUs Radio City Music Hall student welcome. Next spring, our graduates will be with fellow

Aronov, Boris

455

An unforgettable wedding reception requires a remarkable  

E-Print Network [OSTI]

..................................................................... 2,500 Maximum Capacity (depending upon room layout and food service selected................................................................................ 2,500 Maximum Capacity (depending upon room layout and food service selected................................................................................3,000 Maximum Capacity (depending upon room layout and food service selected

Arnold, Jonathan

456

A remark on the Primakoff effect  

E-Print Network [OSTI]

The coherent-nuclear reaction a + A -> a* + A is in the small-angle region dominated by the one-photon-exchange mechanism, often referred to as the Primakoff effect. In this region information about the electromagnetic decay a* -> a + gamma can be obtained. Well-known examples are the two-photon decays of the pi- and eta-mesons. Also decays of charged hadrons can be studied. For charged hadrons the one-photon-exchange amplitude comes with a Coulomb-phase factor and a Coulomb-form factor, which depend on the ratio between transverse- and logitudinal-momentum transfers, the latter being fixed. At the peak of the cross-section distribution, where the two momentum transfers are equal, the form factor could cut down the cross-section value by as much as 40 %. Consequently, a determination of a radiative-decay rate that relies on the peak value becomes sensitive to a proper treatment of the Coulomb-form factor.

Gran Fldt

2010-05-31T23:59:59.000Z

457

Opening Remarks, Grid Integration Initiative Overview  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Loads Power Systems Integration Lab PV and Grid Simulators Energy Systems Integration Lab Fuel Cells, Electrolyzers Outdoor Test Area EVs, MV equipment Rooftop PV & Wind Energy...

458

Brief Remarks on Status and Progress  

E-Print Network [OSTI]

of Innovative Solid Wall Concept Cooling: Vaporization of Lithium at ~1200& Structure: High Plasma-Liquid Interactions Modeling (PPPL, U. Texas) 2.Edge Plasma-liquid Surface Interactions (Largest at Snowmass... Presence of conductor close to plasma boundary (Kotschenreuther) - Case considered 4 cm lithium

California at Los Angeles, University of

459

Brief Remarks on Status and Progress  

E-Print Network [OSTI]

of Innovative Solid Wall Concept Cooling: Vaporization of Lithium at ~1200C Structure: High Plasma-Liquid Interactions Modeling (PPPL, U. Texas) 2.Edge Plasma-liquid Surface Interactions (Largest considered 4 cm lithium with a SOL 20% of minor radius Plasma Elongation > 3 possible with > 20

Abdou, Mohamed

460

Fundamentals of Color 1 Notes and Remarks  

E-Print Network [OSTI]

.2) and (3.1) that the energy per unit time radiated in the same range of wave­ lengths is hc# -1 n(#) d#. We thus get a spectral distribution for the energy, that is, a function that associates to each wavelength its energy (see Figure 3.2). We can consider spectral distributions for di#erent colorimetric

Note: This page contains sample records for the topic "addthis remarks prepared" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Fundamentals of Color 1 Notes and Remarks  

E-Print Network [OSTI]

range (, + d), we conclude from (3.2) and (3.1) that the energy per unit time radiated in the same range of wave- lengths is hc-1 n() d. We thus get a spectral distribution for the energy, that is, a function that associates to each wavelength its energy (see Figure 3.2). We can consider spectral

462

SOME REMARKS ON THE UNIVERSAL COEFFICIENT THEOREM ...  

E-Print Network [OSTI]

If a nuclear separable C*-algebra A can be approximated by C*-subalgebras ... all separable nuclear C*-algebras is equivalent to a certain finite dimensional...

2002-12-23T23:59:59.000Z

463

Some remarks on stability of generalized equations  

E-Print Network [OSTI]

Acknowledgement. The research was partially supported by the Grant Agency of the. Czech Academy of Sciences, project IAA 100750802; the DFG Research...

2011-11-25T23:59:59.000Z

464

Coping with Drought on Rangelands: Concluding Remarks  

E-Print Network [OSTI]

of information disseminated... From David Kraft #12;Reflections · So, this is our socio ecological system · We spheres of interactions of drought Impacts: ­ Biophysical landscape ­ Economic landscape ­ Institutional provoked liquidation ­ 64% of producers are 55 or older & average farm/ranch size of older producers is 75

465

REMARKS FOR ADMINISTRATOR BOLDEN INTERNATIONAL ASTRONAUTICAL CONGRESS  

E-Print Network [OSTI]

as a people on this planet. I could cite many examples of how exploration technology has benefited people to young people who are interested in space. You are our future. We tend to think of the future in terms your reports. Students who are just starting their college careers and people who have just taken

Waliser, Duane E.

466

Remarks on statistical errors in equivalent widths  

E-Print Network [OSTI]

Equivalent width measurements for rapid line variability in atomic spectral lines are degraded by increasing error bars with shorter exposure times. We derive an expression for the error of the line equivalent width $\\sigma(W_\\lambda)$ with respect to pure photon noise statistics and provide a correction value for previous calculations.

Klaus Vollmann; Thomas Eversberg

2006-07-03T23:59:59.000Z

467

Remarks on Renormalization of Black Hole Entropy  

E-Print Network [OSTI]

We elaborate the renormalization process of entropy of a nonextremal and an extremal Reissner-Nordstr\\"{o}m black hole by using the Pauli-Villars regularization method, in which the regulator fields obey either the Bose-Einstein or Fermi-Dirac distribution depending on their spin-statistics. The black hole entropy involves only two renormalization constants. We also discuss the entropy and temperature of the extremal black hole.

Sang Pyo Kim; Sung Ku Kim; Kwang-Sup Soh; Jae Hyung Yee

1996-07-07T23:59:59.000Z

468

Opening Remarks, California Energy Commission Overview  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion | Department ofT ib l L d F SSales LLCDiesel Engines |Open Source Software Messner,Air

469

Opening Remarks, Grid Integration Initiative Overview  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion | Department ofT ib l L d F SSales LLCDiesel Engines |Open Source Software Messner,AirLynn

470

Opening Remarks1. ..............................................................................................................1 Emilio Panarella  

E-Print Network [OSTI]

Soto,PatricioSilva,JoséMoreno,MarceloZambra, GustavoSylvester,andCristianPavez Advances Towards pB11 Fusion with the Dense Plasma Focus6

Zeitlin, Michael &Fedorova, Antonina

471

Remarkable effects are observed if light  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 -the Mid-Infrared at 278, 298,NIST31 ORV 15051 Modification MOThe Case

472

Process for the preparation of protected 3-amino-1,2-dihydroxypropane acetal and derivatives thereof  

DOE Patents [OSTI]

A process for producing protected 3-amino-1,2-dihydroxypropane acetal, particularly in chiral forms, for use as an intermediate in the preparation of various 3-carbon compounds which are chiral. In particular, the present invention relates to the process for preparation of 3-amino-1,2-dihydroxypropane isopropylidene acetal. The protected 3-amino-1,2-dihydroxypropane acetal is a key intermediate to the preparation of chiral 3-carbon compounds which in turn are intermediates to various pharmaceuticals.

Hollingsworth, Rawle I. (Haslett, MI); Wang, Guijun (East Lansing, MI)

2000-01-01T23:59:59.000Z

473

E-Print Network 3.0 - avid radioprobes preparation Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

and plasmids used in this study... of their preparation, by LC-electrospray ionization (ESI)-MSMS on a Thermo Exactive Orbitrap mass spectrometer, using... . Mathematical models...

474

From Artificial Atoms to Nanocrystal Molecules: Preparation and Properties of More Complex Nanostructures  

E-Print Network [OSTI]

from artificial atoms to artificial molecules. Angew.quantum dot as an artificial atom. (a) Density of states inFrom Artificial Atoms to Nanocrystal Molecules: Preparation

Choi, Charina L

2010-01-01T23:59:59.000Z

475

Procedures for preparation, printing, and distribution of UMTRA Project National Environmental Policy Act documents  

SciTech Connect (OSTI)

This paper discusses the procedures for preparation, printing and distribution of Uranium Mill Tailings Remedial Action (UMTRA) Project National Environmental Policy Act documents. (KJD)

Not Available

1988-08-01T23:59:59.000Z

476

Boron containing compounds and their preparation and use in neutron capture therapy  

DOE Patents [OSTI]

The present invention pertains to boron containing thiouracil derivatives, their method of preparations, and their use in the therapy of malignant melanoma using boron neutron capture therapy.

Gabel, Detlef (Bremen, DE)

1992-01-01T23:59:59.000Z

477

Thiourea derivatives, methods of their preparation and their use in neutron capture therapy of malignant melanoma  

DOE Patents [OSTI]

The present invention pertains to boron containing thiouracil derivatives, their method of preparations, and their use in the therapy of malignant melanoma using boron neutron capture therapy.

Gabel, Detlef (Bremen, DE)

1991-01-01T23:59:59.000Z

478

Selected Physical Characteristics of Polystyrene/High Density Polyethylene Composites Prepared from Virgin  

E-Print Network [OSTI]

Selected Physical Characteristics of Polystyrene/High Density Polyethylene Composites Prepared from: Mixtures of polystyrene and high density polyethylene were injection molded from recycled and virgin

479

EIS-0309: Notice of Intent to Prepare a Site-Wide Environmental...  

Energy Savers [EERE]

EIS-0309: Notice of Intent to Prepare a Site-Wide Environmental Impact Statement Oak Ridge Y-12 Plant Pursuant to the National Environmental Policy Act (NEPA), DOE...

480

How ORISE is Making a Difference: Preparing for the Threat of...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Amber Waves ORISE coordinates tabletop exercise to help agencies prepare for the threat of dirty bombs Radiological dispersion devices (RDDs), also known as dirty bombs, are...

Note: This page contains sample records for the topic "addthis remarks prepared" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Preparation, characterization and in vitro evaluation of a new nucleotide analogue prodrug cyclodextrin inclusion complexes.  

E-Print Network [OSTI]

Preparation, characterization and in vitro evaluation of a new nucleotide analogue prodrug for potential therapeutic applications of co-formulation of this new nucleotide analogue with hydroxypropyl

Boyer, Edmond

482

Preparation of most promising braided and/or textile-based adsorbents for seawater testing  

SciTech Connect (OSTI)

Progress Report...Prepare the most promising braided and/or textile-based adsorbents for seawater testing. M3FT-14OR0310012

Janke, Chris [ORNL] [ORNL; Sadananda, Das [ORNL] [ORNL; Mayes, Richard [ORNL] [ORNL

2014-02-26T23:59:59.000Z

483

EIS-0350-S1: Notice of Intent to Prepare a Supplemental Environmental...  

Broader source: Energy.gov (indexed) [DOE]

Prepare a Supplemental Environmental Impact Statement Nuclear Facility Portion of the Chemistry and Metallurgy Research Building Replacement Project at Los Alamos National...

484

EIS-0423-S1: Notice of Intent to Prepare a Supplemental Environmental...  

Office of Environmental Management (EM)

Environmental Impact Statement Long-Term Management and Storage of Elemental Mercury DOE announces it intent to prepare a supplement to the January 2011 Environmental...

485

EIS-0469: Notice of Intent to Prepare a Supplemental Draft Environment...  

Energy Savers [EERE]

Intent to Prepare a Supplemental Draft Environmental Impact Statement Proposed Wilton IV Wind Energy Center Project, Burleigh County, North Dakota Western Area Power...

486

Detroit Edison's Fermi 1 - Preparation for Reactor Removal  

SciTech Connect (OSTI)

This paper is intended to provide information about the ongoing decommissioning tasks at Detroit Edison's Fermi 1 plant, and in particular, the work being performed to prepare the reactor for removal and disposal. In 1972 Fermi 1 was shutdown and the fuel returned to the Atomic Energy Commission. By the end of 1975, a retirement plan was prepared, the bulk sodium removed, and the plant placed in a safe store condition. The plant systems were left isolated with the sodium containing systems inert with carbon dioxide in an attempt to form a carbonate layer, thus passivating the underlying reactive sodium. In 1996, Detroit Edison determined to evaluate the condition of the plant and to make recommendations in relation to the Fermi 1 future plans. At the end of 1997 approval was obtained to remove the bulk asbestos and residual alkali-metals (i.e., sodium and sodium potassium (NaK)). In 2000, full nuclear decommissioning of the plant was approved. To date, the bulk asbestos insulation has been removed, and the only NaK remaining is located in six capillary instrument tubes. The remaining sodium is contained within the reactor, two of the three primary loops, and miscellaneous removed pipes and equipment to be processed. The preferred method for removing or reacting sodium at Fermi 1 is by injecting superheated steam into a heated, nitrogen inert system. The byproducts of this reaction are caustic sodium hydroxide, hydrogen gas, and heat. The decision was made to separate the three primary loops from the reactor for better control prior to processing each loop and the reactor separately. The first loop has already been processed. The main focus is now to process the reactor to allow removal and disposal of the Class C waste prior to the anticipated June 2008 closure of the Barnwell radioactive waste disposal facility located in South Carolina. Lessons learnt are summarized and concern: the realistic schedule and adherence to the schedule, time estimates, personnel accountability, back up or fill in work, work packages, condensation control, radiological contamination control, and organization of the waste stream.

Swindle, Danny [Sargent and Lundy Engineers, LLC, 55 E. Monroe Street, Chicago, IL 60603 (United States)

2008-01-15T23:59:59.000Z

487

Guide to preparing SAND reports and other communication products.  

SciTech Connect (OSTI)

This guide describes the R&A process, Common Look and Feel requirements, and preparation and publishing procedures for communication products at Sandia National Laboratories. Samples of forms and examples of published communications products are provided. This guide takes advantage of the wealth of material now available on the Web as a resource. Therefore, it is best viewed as an electronic document. If some of the illustrations are too small to view comfortably, you can enlarge them on the screen as needed. The format of this document is considerably different than that usually expected of a SAND Report. It was selected to permit the large number of illustrations and examples to be placed closer to the text that references them. In the case of forms, covers, and other items that are included as examples, a link to the Web is provided so that you can access the items and download them for use. This guide details the processes for producing a variety of communication products at Sandia National Laboratories. Figure I-1 shows the general publication development process. Because extensive supplemental material is available from Sandia on the internal web or from external sources (Table I-1), the guide has been shortened to make it easy to find information that you need.

Not Available

2011-09-01T23:59:59.000Z

488

Method of preparing doped oxide catalysts for lean NOx exhaust  

DOE Patents [OSTI]

The lean NOx catalyst includes a substrate, an oxide support material, preferably .gamma.-alumina deposited on the substrate and a metal or metal oxide promoter or dopant introduced into the oxide support material. The metal promoters or dopants are selected from the group consisting of indium, gallium, tin, silver, germanium, gold, nickel, cobalt, copper, iron, manganese, molybdenum, chromium cerium, and vanadium, and oxides thereof, and any combinations thereof. The .gamma.-alumina preferably has a pore volume of from about 0.5 to about 2.0 cc/g; a surface area of between 80 and 350 m.sup.2 /g; an average pore size diameter of between about 3 to 30 nm; and an impurity level of less than or equal to about 0.2 weight percent. In a preferred embodiment the .gamma.-alumina is prepared by a sol-gel method, with the metal doping of the .gamma.-alumina preferably accomplished using an incipient wetness impregnation technique.

Park, Paul W.

2004-03-09T23:59:59.000Z

489

In Situ Type Study of Hydrothermally Prepared Titanates and Silicotitanates  

SciTech Connect (OSTI)

One of the most vexing problems facing the nuclear industry and countries with nuclear weapons is the safe disposal of the generated nuclear waste. Huge quantities of nuclear waste arising from weapons manufacture are stored at the Hanford and Savannah River sites in the USA. The general method of remediation involves the removal of Cs-137, Sr-90 and actinides from a huge quantity of salts, principally NaNO{sub 3}, organics and complexing agents. It has been found that a sodium silicotitanate is able to remove Cs{sup +} selectively from the waste and certain sodium titanates remove Sr{sup 2+} and actinides. These compounds have been prepared by ex-situ hydrothermal methods. We have studied the In situ growth of these materials at the National Synchrotron Light Source, Brookhaven National Laboratory. In addition we will describe the mechanism of ion exchange in the titanosilicate as observed by In situ methods and how the combination of these techniques coupled with an intimate knowledge of the structure of the solids is helping to solve the remediation process. In general, the In situ method allows the investigator to follow the nucleation and crystal growth or phase transformations occurring in hydrothermal reactions.

Clearfield,A.; Tripathi, A.; Medvedev, D.; Celestian, A.; Parise, J.

2006-01-01T23:59:59.000Z

490

Bibliography of marine radiation ecology prepared for the Seabed Program  

SciTech Connect (OSTI)

References on the effects of ionizing radiation on aquatic organisms have been obtained from a number of sources. Many were obtained from reviews and other publications. Although the primary purpose of preparing this bibliography was to obtain information related to the nuclear wastes Seabed Disposal Biology Program of Sandia Laboratories, freshwater organisms are included as a matter of convenience and also with the belief that such a bibliography would be of interest to a wider audience than that restricted to the Seabed Program. While compilation of a list in an area broad in scope is often somewhat arbitrary, an attempt was made to reference publications that were related to field or laboratory studies of wild species of plants and animals with respect to radiation effects. Complete information concerning each reference are provided without excessive library search. Since one often finds references listed in the literature that are incompletely cited, it was not always possible to locate the reference for verification or completion of the citation. Such references are included where they appeared to be of possible value. When known, a reference is followed with its Nuclear Science Abstract designation, or rarely other abstract sources. Those desiring additional information should check Nuclear Science Abstracts utilizing the abstract number presented or other abstracting sources. In addition, the language of the article, other than English, is given when it is known to me.

Schultz, V.S.

1980-02-01T23:59:59.000Z

491

Process for preparing superconducting film having substantially uniform phase development  

DOE Patents [OSTI]

A process is disclosed for preparing a superconducting film, such as a thallium-barium-calcium-copper oxide superconducting film, having substantially uniform phase development. The process comprises providing an electrodeposition bath having one or more soluble salts of one or more respective potentially superconducting metals in respective amounts adequate to yield a superconducting film upon subsequent appropriate treatment. Should all of the metals required for producing a superconducting film not be made available in the bath, such metals can be a part of the ambient during a subsequent annealing process. A soluble silver salt in an amount between about 0.1% and about 4.0% by weight of the provided other salts is also provided to the bath, and the bath is electrically energized to thereby form a plated film. The film is annealed in ambient conditions suitable to cause formation of a superconductor film. Doping with silver reduces the temperature at which the liquid phase appears during the annealing step, initiates a liquid phase throughout the entire volume of deposited material, and influences the nucleation and growth of the deposited material. 3 figs.

Bharacharya, R.; Parilla, P.A.; Blaugher, R.D.

1995-12-19T23:59:59.000Z

492

Handbook for preparation of Individual Procurement Action Report  

SciTech Connect (OSTI)

The Procurement and Assistance Data System (PADS) provides a mechanism for collecting, assembling, organizing, and presenting acquisition and assistance data for the Department of Energy (DOE). This handbook and associated documents establish a uniform system to report acquisition/assistance data to PADS for the collection, processing, and dissemination of official statistical data on the Department`s acquisition and assistance actions. The data provides, based on information available at the time of request, a basis for any recurring and special reports to the senior procurement executive, Congress, General Accounting Office (GAO), Federal executive agencies, Office of management and Budget (OMB), and the general public. It provides information for measuring and assessing the extent to which small business firms and small disadvantages business enterprises are sharing in DOE placement, and for other acquisition and assistance policy and management control purposes. The Handbook for the Preparation of the Individual Procurement Action Report (IPAR) has been designed in two sections; Procurement and Financial Assistance to support the individual forms.

NONE

1996-10-01T23:59:59.000Z

493

Electrochemical process for the preparation of nitrogen fertilizers  

DOE Patents [OSTI]

The present invention provides methods and apparatus for the preparation of nitrogen fertilizers including ammonium nitrate, urea, urea-ammonium nitrate, and/or ammonia, at low temperature and pressure, preferably at ambient temperature and pressure, utilizing a source of carbon, a source of nitrogen, and/or a source of hydrogen or hydrogen equivalent. Implementing an electrolyte serving as ionic charge carrier, (1) ammonium nitrate is produced via the reduction of a nitrogen source at the cathode and the oxidation of a nitrogen source at the anode; (2) urea or its isomers are produced via the simultaneous cathodic reduction of a carbon source and a nitrogen source; (3) ammonia is produced via the reduction of nitrogen source at the cathode and the oxidation of a hydrogen source or a hydrogen equivalent such as carbon monoxide or a mixture of carbon monoxide and hydrogen at the anode; and (4) urea-ammonium nitrate is produced via the simultaneous cathodic reduction of a carbon source and a nitrogen source, and anodic oxidation of a nitrogen source. The electrolyte can be aqueous, non-aqueous, or solid.

Aulich, Ted R. (Grand Forks, ND); Olson, Edwin S. (Grand Forks, ND); Jiang, Junhua (Grand Forks, ND)

2012-04-10T23:59:59.000Z

494

Haloporphyrins and their preparation and use as catalysts  

DOE Patents [OSTI]

The invention provides novel catalyst compositions, useful in the oxidation of hydrocarbons with air or oxygen to form hydroxy-group containing compounds and in the decomposition of hydroperoxides to form hydroxy-group containing compounds. The catalysts comprise transition metal complexes of a porphyrin ring having 1 to 12 halogen substituents on the porphyrin ring, at least one of said halogens being in a meso position and/or the catalyst containing no aryl group in a meso position. The compositions are prepared by halogenating a transition metal complex of a porphyrin. In one embodiment, a complex of a porphyrin with a metal whose porphyrin complexes are not active for oxidation of hydrocarbons is halogenated, thereby to obtain a haloporphyrin complex of that metal, the metal is removed from the haloporphyrin complex to obtain the free base form of the haloporphyrin, and a metal such as iron whose porphyrin complexes are active for oxidation of hydrocarbons and for the decomposition of alkyl hydroperoxides is complexed with the free base to obtain an active catalyst for oxidation of hydrocarbons and decomposition of alkyl hydroperoxides.

Ellis, P.E. Jr.; Lyons, J.E.

1997-09-02T23:59:59.000Z

495

11/21/2006 01:20 PMThe Office of Science -Remarks on behalf of the United States Government Page 1 of 2http://www.sc.doe.gov/News_Information/News_Room/2006/ITER/RLO_Remarksfor_ITER_Signing_Ceremony.html  

E-Print Network [OSTI]

11/21/2006 01:20 PMThe Office of Science - Remarks on behalf of the United States Government Page 1 Universities National Laboratories Scientific User Facilities Budget and Planning Grants and Contracts Project of the United States Government by Dr. Raymond Orbach Under Secretary for Science U.S. Department of Energy

496

Guidance Manual for K-12 SchoolsGuidance Manual for K-12 Schools prepared for  

E-Print Network [OSTI]

Compliance and Best Management Practices prepared by: October 2006 Facilities O peration and Ma intenanceAreas .............................................................................................1-5 1.3 Best Management PracticesGuidance Manual for K-12 SchoolsGuidance Manual for K-12 Schools prepared for: Environmental

Jia, Songtao

497

R/V KILO MOANA SAFETY MANAGEMENT MANUAL TITLE PREPARED BY: REVISION NO. PROCEDURE NO.  

E-Print Network [OSTI]

R/V KILO MOANA SAFETY MANAGEMENT MANUAL TITLE PREPARED BY: REVISION NO. PROCEDURE NO. SHIP and safe shipboard management practices towards ensuring new crewmembers, embarked science personnel of the indoctonation and orientation process. #12;R/V KILO MOANA SAFETY MANAGEMENT MANUAL TITLE PREPARED BY: REVISION

Wang, Yuqing

498

Silicon nitride/silicon carbide composite densified materials prepared using composite powders  

DOE Patents [OSTI]

Prepare silicon nitride-silicon carbide composite powders by carbothermal reduction of crystalline silica powder, carbon powder and, optionally, crystalline silicon nitride powder. The crystalline silicon carbide portion of the composite powders has a mean number diameter less than about 700 nanometers and contains nitrogen. The composite powders may be used to prepare sintered ceramic bodies and self-reinforced silicon nitride ceramic bodies.

Dunmead, S.D.; Weimer, A.W.; Carroll, D.F.; Eisman, G.A.; Cochran, G.A.; Susnitzky, D.W.; Beaman, D.R.; Nilsen, K.J.

1997-07-01T23:59:59.000Z

499

Focused ion beam specimen preparation for electron holography of electrically biased thin film solar cells  

E-Print Network [OSTI]

, biased TEM specimen, thin film solar cell, FIB Thin films of hydrogenated Si (Si:H) can be used as active for electron holography of a thin film solar cell using conventional lift-out specimen preparation and a homeFocused ion beam specimen preparation for electron holography of electrically biased thin film

Dunin-Borkowski, Rafal E.

500

2011 Bioenergy Action Plan Prepared by the California Energy Commission for the  

E-Print Network [OSTI]

2011 Bioenergy Action Plan Prepared by the California Energy Commission for the Bioenergy Commission Renewables Committee as part of the Preparation of the 2011 Bioenergy Action Plan ­ docket # 10 policy of the Energy Commission until the report is adopted. #12;i ACKNOWLEDGEMENTS The 2011 Bioenergy