National Library of Energy BETA

Sample records for addthis problem red

  1. V-138: Red Hat update for icedtea-web | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    8: Red Hat update for icedtea-web V-138: Red Hat update for icedtea-web April 19, 2013 - 6:00am Addthis PROBLEM: Red Hat has issued an update for icedtea-web PLATFORM: Red Hat ...

  2. U-156: Red Hat update for JBoss Enterprise Portal Platform | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy 56: Red Hat update for JBoss Enterprise Portal Platform U-156: Red Hat update for JBoss Enterprise Portal Platform April 26, 2012 - 7:00am Addthis PROBLEM: Red Hat update for JBoss Enterprise Portal Platform PLATFORM: JBoss Enterprise Portal Platform 5.x ABSTRACT: Update for JBoss Enterprise Portal Platform Reference Links: Secunia Advisory SA48954 CVE-2011-4314 CVE-2012-0818 IMPACT ASSESSMENT: Medium Discussion: Red Hat has issued an update for JBoss Enterprise Portal Platform. This

  3. T-712: Red Hat Enterprise MRG Grid 2.0 security, bug fix and enhancement

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    update | Department of Energy 12: Red Hat Enterprise MRG Grid 2.0 security, bug fix and enhancement update T-712: Red Hat Enterprise MRG Grid 2.0 security, bug fix and enhancement update September 8, 2011 - 10:30am Addthis PROBLEM: A flaw was discovered in Cumin where it would log broker authentication credentials to the Cumin log file. A vulnerability was reported in Red Hat Enterprise MRG Grid. A local user can access the broker password. PLATFORM: Red Hat Enterprise MRG v2 for Red Hat

  4. T-712: Red Hat Enterprise MRG Grid 2.0 security, bug fix and enhancement

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    update | Department of Energy 12: Red Hat Enterprise MRG Grid 2.0 security, bug fix and enhancement update T-712: Red Hat Enterprise MRG Grid 2.0 security, bug fix and enhancement update September 8, 2011 - 10:30am Addthis PROBLEM: A flaw was discovered in Cumin where it would log broker authentication credentials to the Cumin log file. A vulnerability was reported in Red Hat Enterprise MRG Grid. A local user can access the broker password. PLATFORM: Red Hat Enterprise MRG v2 for Red Hat

  5. V-233: Red Hat update for JBoss Fuse | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    3: Red Hat update for JBoss Fuse V-233: Red Hat update for JBoss Fuse September 3, 2013 - 6:00am Addthis PROBLEM: Red Hat has issued an update for JBoss Fuse PLATFORM: Red Hat JBoss Fuse 6.x ABSTRACT: This fixes multiple vulnerabilities, which can be exploited by malicious people to bypass certain security restrictions and cause a DoS. REFERENCE LINKS: Secunia Advisory SA54683 Redhat Advisory RHSA-2013:1185-1 CVE-2013-0269 CVE-2013-1768 CVE-2013-1821 CVE-2013-2160 IMPACT ASSESSMENT: Medium

  6. Rooftop Solar Challenge to Cut Solar's Red Tape | Department...

    Energy Savers [EERE]

    Rooftop Solar Challenge to Cut Solar's Red Tape Rooftop Solar Challenge to Cut Solar's Red Tape December 1, 2011 - 4:35pm Addthis Ginny Simmons Ginny Simmons Former Managing Editor ...

  7. DOE Tour of Zero: The Greenbank Red House (Leganza) by Clifton...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Greenbank Red House (Leganza) by Clifton View Homes DOE Tour of Zero: The Greenbank Red House (Leganza) by Clifton View Homes Addthis 1 of 6 This is a certified U.S. DOE Zero...

  8. T-563: Red Hat Directory Server Bugs Let Local Users Gain Elevated...

    Broader source: Energy.gov (indexed) [DOE]

    server and command line utilities for server administration. Addthis Related Articles T-671: Red Hat system-config-firewall Lets Local Users Gain Root Privileges V-041: Red Hat...

  9. Red Sky with Red Mesa

    ScienceCinema (OSTI)

    None

    2014-06-23

    The Red Sky/Red Mesa supercomputing platform dramatically reduces the time required to simulate complex fuel models, from 4-6 months to just 4 weeks, allowing researchers to accelerate the pace at which they can address these complex problems. Its speed also reduces the need for laboratory and field testing, allowing for energy reduction far beyond data center walls.

  10. Red Sky with Red Mesa

    SciTech Connect (OSTI)

    2011-04-14

    The Red Sky/Red Mesa supercomputing platform dramatically reduces the time required to simulate complex fuel models, from 4-6 months to just 4 weeks, allowing researchers to accelerate the pace at which they can address these complex problems. Its speed also reduces the need for laboratory and field testing, allowing for energy reduction far beyond data center walls.

  11. Problem

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2 Problem Scarcity of clean water leads to disease, death and often international tension. In many parts of the world, access to potable water is limited. The clean water supply...

  12. Energy Secretary Bodman Tours Alabama Red Cross Facility and Attends

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    National Day of Prayer and Remembrance Service with Governor Riley | Department of Energy Tours Alabama Red Cross Facility and Attends National Day of Prayer and Remembrance Service with Governor Riley Energy Secretary Bodman Tours Alabama Red Cross Facility and Attends National Day of Prayer and Remembrance Service with Governor Riley September 16, 2005 - 10:24am Addthis MONTGOMERY, AL - Today, Secretary of Energy Samuel W. Bodman traveled to Montgomery, Alabama, to commemorate a National

  13. Problem

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Tech Transfer Success Stories * 2012 Problem Optical coatings are ubiquitous, appearing on items that range from electronic devices, photographic lenses, and windows to aircraft sensors, photovoltaic cells, and lightweight plastic goggles for troops in the field. The coatings are applied to materials such as glass and ceramics, which protect or alter the way the material reflects and transmits light. However, the two main methods of applying these coatings - sputtering and chemical vapor

  14. Department of Energy Offers $245 Million Conditional Loan Guarantee to Red

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    River Environmental Products | Department of Energy 45 Million Conditional Loan Guarantee to Red River Environmental Products Department of Energy Offers $245 Million Conditional Loan Guarantee to Red River Environmental Products December 9, 2009 - 12:00am Addthis Washington, DC - Energy Secretary Steven Chu today announced the offer of a $245 million conditional loan guarantee to Red River Environmental Products, LLC to build an activated carbon (AC) manufacturing facility near Coushatta,

  15. Energy Department Invests $12 Million to Slash Red Tape and Speed Solar

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Deployment for Homes and Businesses | Department of Energy 2 Million to Slash Red Tape and Speed Solar Deployment for Homes and Businesses Energy Department Invests $12 Million to Slash Red Tape and Speed Solar Deployment for Homes and Businesses November 6, 2013 - 8:30am Addthis News Media Contact (202) 586-4940 WASHINGTON - As part of the Obama Administration's efforts to ensure America's continued leadership in clean energy and double renewable electricity generation once again by 2020,

  16. EERE Success Story-Nationwide: Slashing Red Tape To Speed Solar

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Deployment for Homes and Businesses | Department of Energy Slashing Red Tape To Speed Solar Deployment for Homes and Businesses EERE Success Story-Nationwide: Slashing Red Tape To Speed Solar Deployment for Homes and Businesses January 24, 2014 - 12:00am Addthis EERE Success Story—Nationwide: Slashing Red Tape To Speed Solar Deployment for Homes and Businesses While solar panels, inverters and other hardware are more affordable than ever before (the average cost of solar PV panels has

  17. Red Lake Weatherization Project

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    REVIEW RED LAKE WEATHERIZATION PROJECT BERT VAN WERT ENERGY ACTIVITIES COORDINATOR Project Overview To develop the capacity to conduct energy audits Implement energy efficiency measures into Tribal homes Develop a Tribally administered Energy Efficiency Program and business PROJECT LOCATION Our project is located at Red Lake Housing Authority Red Lake Band of Chippewa Indians Red Lake , MN Red Lake Band of Chippewas Area overview Reservation (Diminished Lands) and Surroundings Red Lake Band of

  18. Rooftop Solar Challenge to Cut Solar's Red Tape | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Challenge to Cut Solar's Red Tape Rooftop Solar Challenge to Cut Solar's Red Tape December 1, 2011 - 4:35pm Addthis Ginny Simmons Ginny Simmons Former Managing Editor for Energy.gov, Office of Public Affairs What does this project do? The 22 teams will implement step-by-step actions throughout the next year to standardize solar permitting processes, update planning and zoning codes, improve standards for connecting solar power to the electric grid, and increase access to financing. Up to 40

  19. 7X performance results - final report : ASCI Red vs Red Storm.

    SciTech Connect (OSTI)

    Dinge, Dennis C.; Davis, Michael E.; Haskell, Karen H.; Ballance, Robert A.; Gardiner, Thomas Anthony; Stevenson, Joel O.; Noe, John P.

    2011-04-01

    The goal of the 7X performance testing was to assure Sandia National Laboratories, Cray Inc., and the Department of Energy that Red Storm would achieve its performance requirements which were defined as a comparison between ASCI Red and Red Storm. Our approach was to identify one or more problems for each application in the 7X suite, run those problems at multiple processor sizes in the capability computing range, and compare the results between ASCI Red and Red Storm. The first part of this report describes the two computer systems, the applications in the 7X suite, the test problems, and the results of the performance tests on ASCI Red and Red Storm. During the course of the testing on Red Storm, we had the opportunity to run the test problems in both single-core mode and dual-core mode and the second part of this report describes those results. Finally, we reflect on lessons learned in undertaking a major head-to-head benchmark comparison.

  20. Crowdsourcing Initiative Seeks Buildings-Related Problems to Solve |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Crowdsourcing Initiative Seeks Buildings-Related Problems to Solve Crowdsourcing Initiative Seeks Buildings-Related Problems to Solve June 30, 2015 - 9:00am Addthis Calling all building technology innovators! The Building Technologies Office is partnering with the successful SunShot Catalyst crowdsourcing initiative to identify and solve problems related to software development, data, and/or automation. In the first, "Ideation" phase of the initiative, those

  1. Open Problems, Solved Problems !

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Problems, Solved Problems and Non-Problems in DOE's Big Data Kathy Y elick Professor o f E lectrical E ngineering a nd C omputer S ciences University o f C alifornia a t B...

  2. Thor's Hammer/Red Storm

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Camp & Jim Tomkins The Design Specification and Initial Implementation of the Red Storm ... technologies Computing domains at Sandia Red Storm is targeting the highest-end market ...

  3. Red | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Red Red Arm Amputation Due to Explosion - University of Hawaii Lessons Learned Read more about Arm Amputation Due to Explosion - University of Hawaii Lessons Learned 2015 LL Chemical Explosion Causes Eye Injury 6-11-15 Read more about 2015 LL Chemical Explosion Causes Eye Injury 6-11-15 12-14-1999 - Sodium Potassium (NaK) Reaction Results in Personnel Injuries Read more about 12-14-1999 - Sodium Potassium (NaK) Reaction Results in Personnel Injuries 11-23-1998 - Update of Type A Investigation of

  4. Walmart Red Bluff | Open Energy Information

    Open Energy Info (EERE)

    Walmart Red Bluff Jump to: navigation, search Name Walmart Red Bluff Facility Walmart Red Bluff Sector Wind energy Facility Type Community Wind Facility Status In Service Owner...

  5. Red Mesa | Open Energy Information

    Open Energy Info (EERE)

    Mesa Jump to: navigation, search Name Red Mesa Facility Red Mesa Sector Wind energy Facility Type Commercial Scale Wind Facility Status In Service Owner NextEra Energy Resources...

  6. Statistics Show Bearing Problems Cause the Majority of Wind Turbine Gearbox

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Failures | Department of Energy Statistics Show Bearing Problems Cause the Majority of Wind Turbine Gearbox Failures Statistics Show Bearing Problems Cause the Majority of Wind Turbine Gearbox Failures September 17, 2015 - 12:29pm Addthis In the past, the wind energy industry has been relatively conservative in terms of data sharing, especially with the general public, which has inhibited the research community's efforts to identify and mitigate the premature failures of wind turbine

  7. Tackling Energy Problems For America's Tribal Nations | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Energy Problems For America's Tribal Nations Tackling Energy Problems For America's Tribal Nations June 20, 2012 - 6:07pm Addthis Julia Bovey, First Wind; Tracey LeBeau; Neil Kiely, First Wind; and Bob Springer (NREL) at First Wind's new Rollins project near Lincoln, Maine. Julia Bovey, First Wind; Tracey LeBeau; Neil Kiely, First Wind; and Bob Springer (NREL) at First Wind's new Rollins project near Lincoln, Maine. Tracey A. LeBeau Former Director, Office of Indian Energy Policy

  8. Red Canyon Wind Farm | Open Energy Information

    Open Energy Info (EERE)

    Canyon Wind Farm Jump to: navigation, search Name Red Canyon Wind Farm Facility Red Canyon Wind Farm Sector Wind energy Facility Type Commercial Scale Wind Facility Status In...

  9. Known Problems

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Known Problems Known Problems No Open Issues There are currently no open issues with Euclid. Read the full post Subscribe via RSS Subscribe Browse by Date January 2016 Last edited: 2016-04-29 11:34:51

  10. Known Problems

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Problems Known Problems Viewing entries posted in 2001 There are no blog entries Subscribe via RSS Subscribe Browse by Date January 2016 Last edited: 2016-04-29 11:34:51

  11. Energy Secretary Bodman Tours Alabama Red Cross Facility and...

    Broader source: Energy.gov (indexed) [DOE]

    For more on the President's proclamation of the National Day of Prayer and Remembrance, please visit www.whitehouse.gov. Media contact: Rebecca Neale, 202586-4940 Addthis Related ...

  12. Red Power Energy Documentary Premiere

    Broader source: Energy.gov [DOE]

    Presented by the Indigenous Film & Arts Festival, the documentary film Red Power Energy, told from the Native perspective, presents a portrait of renewable and nonrenewable energy resources on American Indian lands in five states and examines the challenges involved in balancing economic development interests and cultural and environmental concerns.

  13. EA-1692: Red River Environmental Products, LLC Activated Carbon...

    Office of Environmental Management (EM)

    2: Red River Environmental Products, LLC Activated Carbon Manufacturing Facility, Red River Parish, LA EA-1692: Red River Environmental Products, LLC Activated Carbon Manufacturing ...

  14. Red River Biodiesel Ltd | Open Energy Information

    Open Energy Info (EERE)

    Ltd Jump to: navigation, search Name: Red River Biodiesel, Ltd. Place: Houston, Texas Zip: 77006 Product: Red River operates a biodiesel plant in Houstion, Texas with a capacity of...

  15. Red Sun Energy | Open Energy Information

    Open Energy Info (EERE)

    Red Sun Energy Place: Long An Province, Vietnam Product: A Vietnam-based PV module manufacturer References: Red Sun Energy1 This article is a stub. You can help OpenEI by...

  16. Science On Tap - Red Wine and Mars

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Science On Tap - Red Wine and Mars Science On Tap - Red Wine and Mars WHEN: Jun 18, 2015 5:30 PM - 7:00 PM WHERE: UnQuarked Wine Room 145 Central Park Square, Los Alamos, New...

  17. Red Hills Wind Farm | Open Energy Information

    Open Energy Info (EERE)

    Hills Wind Farm Jump to: navigation, search Name Red Hills Wind Farm Facility Red Hills Wind Farm Sector Wind energy Facility Type Commercial Scale Wind Facility Status In Service...

  18. ORISE Faculty Research Experiences: Dr. Eddie Red

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Eddie Red Professor Makes Important Connections through Research Experience Dr. Eddie Red In ORNL's Chemical Sciences Division, Dr. Eddie Red of Morehouse College studies nanotube characteristics-technology that could impact future solar cells, as well as battery and fuel cells. Eddie C. Red, Ph.D., has longed to set up a functional research laboratory for the training and development of under-represented minorities in physics and engineering at Morehouse College, where he is a professor.

  19. The Red Storm Architecture and Early Experiences with Multi-core Processors

    SciTech Connect (OSTI)

    Tomkins, James L; Brightwell, Ron; Camp, William J; Dosanjh, Sudip; Kelly, Suzanne M; Lin, Paul T.; Vaughan, Courtenay T.; Levesque, John; Tipparaju, Vinod

    2010-01-01

    The Red Storm architecture, which was conceived by Sandia National Laboratories and implemented by Cray, Inc., has become the basis for most successful line of commercial supercomputers in history. The success of the Red Storm architecture is due largely to the ability to effectively and efficiently solve a wide range of science and engineering problems. The Cray XT series of machines that embody the Red Storm architecture have allowed for unprecedented scaling and performance of parallel applications spanning many areas of scientific computing. In this paper, we describe the fundamental characteristics of the architecture and its implementation that have enabled this success, even through successive generations of hardware and software.

  20. Redding, Connecticut: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Redding, Connecticut: Energy Resources Jump to: navigation, search Equivalent URI DBpedia Coordinates 41.3025955, -73.3834532 Show Map Loading map... "minzoom":false,"mappings...

  1. RESOURCE ENERGY DATA - The RED Book

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    16 Page i Bonneville Power Administration Conservation RESOURCE ENERGY DATA (The RED Book) INTRODUCTION On December 5, 1980, the 96 th Congress passed the Pacific Northwest...

  2. Redding Electric - Residential and Commercial Energy Efficiency...

    Broader source: Energy.gov (indexed) [DOE]

    REU for Commercial Program Info Sector Name Utility Administrator Redding Electric Utility Website http:www2.reupower.comrebates.asp State California Program Type Rebate...

  3. EA-1692: Red River Environmental Products, LLC Activated Carbon

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Manufacturing Facility, Red River Parish, LA | Department of Energy 2: Red River Environmental Products, LLC Activated Carbon Manufacturing Facility, Red River Parish, LA EA-1692: Red River Environmental Products, LLC Activated Carbon Manufacturing Facility, Red River Parish, LA June 1, 2010 EA-1692: Final Environmental Assessment Construction and Start-Up of an Activated Carbon Manufacturing Facility in Red River Parish, Louisiana June 11, 2010 EA-1692: Finding of No Significant Impact Red

  4. Modeling and simulation of Red Teaming. Part 1, Why Red Team M&S?

    SciTech Connect (OSTI)

    Skroch, Michael J.

    2009-11-01

    Red teams that address complex systems have rarely taken advantage of Modeling and Simulation (M&S) in a way that reproduces most or all of a red-blue team exchange within a computer. Chess programs, starting with IBM's Deep Blue, outperform humans in that red-blue interaction, so why shouldn't we think computers can outperform traditional red teams now or in the future? This and future position papers will explore possible ways to use M&S to augment or replace traditional red teams in some situations, the features Red Team M&S should possess, how one might connect live and simulated red teams, and existing tools in this domain.

  5. Sigurd Red Butte No2 | Open Energy Information

    Open Energy Info (EERE)

    Sigurd Red Butte No2 Jump to: navigation, search NEPA Document Collection for: Sigurd Red Butte No2 EIS for NA Sigurd to Red Butte No. 2 345kV Transmission Project General NEPA...

  6. City of Redding, California (Utility Company) | Open Energy Informatio...

    Open Energy Info (EERE)

    City of Redding, California (Utility Company) Jump to: navigation, search Name: City of Redding Place: California Phone Number: 530.245.7000 Website: www.reupower.com Outage...

  7. Renewable Energy Development Group Ltd RED | Open Energy Information

    Open Energy Info (EERE)

    Group Ltd RED Jump to: navigation, search Name: Renewable Energy Development Group Ltd (RED) Place: Edinburgh, United Kingdom Zip: EH1 2DP Sector: Biomass, Hydro, Wind energy...

  8. U-200: Red Hat Directory Server Information Disclosure Security...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    0: Red Hat Directory Server Information Disclosure Security Issue and Vulnerability U-200: Red Hat Directory Server Information Disclosure Security Issue and Vulnerability June 27,...

  9. Red River Hot Springs Geothermal Area | Open Energy Information

    Open Energy Info (EERE)

    Red River Hot Springs Geothermal Area Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Red River Hot Springs Geothermal Area Contents 1 Area Overview 2 History and...

  10. Town of Red Springs, North Carolina (Utility Company) | Open...

    Open Energy Info (EERE)

    Help Apps Datasets Community Login | Sign Up Search Page Edit with form History Town of Red Springs, North Carolina (Utility Company) Jump to: navigation, search Name: Red Springs...

  11. T-678: Red Hat Enterprise Virtualization Hypervisor VLAN Packet...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    8: Red Hat Enterprise Virtualization Hypervisor VLAN Packet Processing Flaw Lets Remote Users Deny Service T-678: Red Hat Enterprise Virtualization Hypervisor VLAN Packet...

  12. MHK Technologies/RED HAWK | Open Energy Information

    Open Energy Info (EERE)

    RED HAWK < MHK Technologies Jump to: navigation, search << Return to the MHK database homepage RED HAWK.jpg Technology Profile Primary Organization Natural Currents Energy Services...

  13. Red River Hot Springs Pool & Spa Low Temperature Geothermal Facility...

    Open Energy Info (EERE)

    Springs Pool & Spa Low Temperature Geothermal Facility Jump to: navigation, search Name Red River Hot Springs Pool & Spa Low Temperature Geothermal Facility Facility Red River Hot...

  14. Renewable Energies Development RED 2002 | Open Energy Information

    Open Energy Info (EERE)

    Development RED 2002 Jump to: navigation, search Name: Renewable Energies Development (RED) 2002 Place: Rome, Italy Zip: 142 Product: PV systems integrator. Coordinates:...

  15. City of Red Cloud, Nebraska (Utility Company) | Open Energy Informatio...

    Open Energy Info (EERE)

    Red Cloud, Nebraska (Utility Company) Jump to: navigation, search Name: Red Cloud Municipal Power Place: Nebraska Phone Number: 402-746-2215 Website: www.redcloudnebraska.comgover...

  16. Belgium's Red Electrical Devils Win $1 Million for Innovative...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Belgium's Red Electrical Devils Win 1 Million for Innovative Inverter Design NREL ... Google and IEEE announced today that Belgium's Red Electrical Devils, a team from CE+T ...

  17. Host compounds for red phosphorescent OLEDs

    SciTech Connect (OSTI)

    Xia, Chuanjun; Cheon, Kwang -Ohk

    2015-08-25

    Novel compounds containing a triphenylene moiety linked to an .alpha..beta. connected binaphthyl ring system are provided. These compounds have surprisingly good solubility in organic solvents and are useful as host compounds in red phosphorescent OLEDs.

  18. Redding Electric- Renewable Energy Rebate Program

    Broader source: Energy.gov [DOE]

    The Earth Advantage Rebate Program was designed to offer rebates to residential and business customers of Redding Electric Utility (REU) for solar PV, solar thermal, and geothermal heat pump...

  19. Red Hat Enterprise Virtualization - KVM-based infrastructure services at BNL

    SciTech Connect (OSTI)

    Cortijo, D.

    2011-06-14

    Over the past 18 months, BNL has moved a large percentage of its Linux-based servers and services into a Red Hat Enterprise Virtualization (RHEV) environment. This presentation will address our approach to virtualization, critical decision points, and a discussion of our implementation. Specific topics will include an overview of hardware and software requirements, networking, and storage; discussion of the decision of Red Hat solution over competing products (VMWare, Xen, etc); details on some of the features of RHEV - both current and on their roadmap; Review of performance and reliability gains since deployment completion; path forward for RHEV at BNL and caveats and potential problems.

  20. EERE: VTO - Red Leaf PNG Image | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Red Leaf PNG Image EERE: VTO - Red Leaf PNG Image red_leaf_18215.png (11.54 MB) More Documents & Publications EERE: VTO - Hybrid Bus PNG Image EERE: VTO - UPS Truck PNG Image RedLeaf Resources Ecoshale Project

  1. U-053: Linux kexec Bugs Let Local and Remote Users Obtain Potentially

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Sensitive Information | Department of Energy 53: Linux kexec Bugs Let Local and Remote Users Obtain Potentially Sensitive Information U-053: Linux kexec Bugs Let Local and Remote Users Obtain Potentially Sensitive Information December 7, 2011 - 7:30am Addthis PROBLEM: Linux kexec Bugs Let Local and Remote Users Obtain Potentially Sensitive Information . PLATFORM: Red Hat Enterprise Linux Desktop (v. 6) Red Hat Enterprise Linux HPC Node (v. 6) Red Hat Enterprise Linux Server (v. 6) Red Hat

  2. Red mud characterization using nuclear analytical techniques

    SciTech Connect (OSTI)

    Obhodas, J.; Sudac, D.; Matjacic, L.; Valkovic, V.

    2011-07-01

    Red mud is a toxic waste left as a byproduct in aluminum production Bayer process. Since it contains significant concentrations of other chemical elements interesting for industry, including REE, it is also potential secondary ore source. Recent events in some countries have shown that red mud presents a serious environmental hazard if not properly stored. The subject of our study is the red mud from an ex-aluminum plant in Obrovac, Croatia, left from processing of bauxite mined during late 70's and early 80's at the eastern Adriatic coast and since than stored in open concrete basins for more than 30 years. We have used energy dispersive x-ray fluorescence analysis (both tube and radioactive source excitation), fast neutron activation analysis and passive gamma spectrometry to identify a number of elements present in the red mud, their concentration levels and radioactivity in the red mud. The high concentrations of Al, Si, Ca, Ti and Fe have been measured. Chemical elements Sc, Cr, Mn, Co, Ni, Cu, Zn, Ga, As, Se, Br, Y, La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Pb, Th and U were found in lower concentrations. No significant levels of radioactivity have been measured. (authors)

  3. Application of the FETI Method to ASCI Problems: Scalability Results on One Thousand Processors and Discussion of Highly Heterogeneous Problems

    SciTech Connect (OSTI)

    Bhardwaj, M.; Day, D.; Farhat, C.; Lesoinne, M; Pierson, K.; Rixen, D.

    1999-04-01

    We report on the application of the one-level FETI method to the solution of a class of substructural problems associated with the Department of Energy's Accelerated Strategic Computing Initiative (ASCI). We focus on numerical and parallel scalability issues, and on preliminary performance results obtained on the ASCI Option Red supercomputer configured with as many as one thousand processors, for problems with as many as 5 million degrees of freedom.

  4. Science On Tap - Red Wine and Mars

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Science On Tap - Red Wine and Mars Science On Tap - Red Wine and Mars WHEN: Jun 18, 2015 5:30 PM - 7:00 PM WHERE: UnQuarked Wine Room 145 Central Park Square, Los Alamos, New Mexico 87544, USA SPEAKER: Nina Lanza, Geochemist and Planetary Scientist CONTACT: Jessica Privette 505 667-0375 CATEGORY: Bradbury INTERNAL: Calendar Login Science on Tap series Event Description Science On Tap happens every third Thursday of the month, featuring a new topic each week. It begins with an informal 15-minute

  5. The FIRST-2MASS Red Quasar Survey

    SciTech Connect (OSTI)

    Glikman, E; Helfand, D J; White, R L; Becker, R H; Gregg, M D; Lacy, M

    2007-06-28

    Combining radio observations with optical and infrared color selection--demonstrated in our pilot study to be an efficient selection algorithm for finding red quasars--we have obtained optical and infrared spectroscopy for 120 objects in a complete sample of 156 candidates from a sky area of 2716 square degrees. Consistent with our initial results, we find our selection criteria--J-K > 1.7,R-K > 4.0--yield a {approx} 50% success rate for discovering quasars substantially redder than those found in optical surveys. Comparison with UVX- and optical color-selected samples shows that {approx}> 10% of the quasars are missed in a magnitude-limited survey. Simultaneous two-frequency radio observations for part of the sample indicate that a synchrotron continuum component is ruled out as a significant contributor to reddening the quasars spectra. We go on to estimate extinctions for our objects assuming their red colors are caused by dust. Continuum fits and Balmer decrements suggest E(B-V) values ranging from near zero to 2.5 magnitudes. Correcting the K-band magnitudes for these extinctions, we find that for K {le} 14.0, red quasars make up between 25% and 60% of the underlying quasar population; owing to the incompleteness of the 2MASS survey at fainter K-band magnitudes, we can only set a lower limit to the radio-detected red quasar population of > 20-30%.

  6. ASCI Red for dummies : a recipe book for easy use of the ASCI Red platform.

    SciTech Connect (OSTI)

    Kelly, Suzanne Marie; Quinlan, Gerald F.; Miller, Joel D.; Sault, Allen G.; McAllister, Paula L.

    2003-11-01

    It has been recognized that documentation for new customers of ASCI Red, aka janus or the Intel Teraflops at Sandia National Laboratories, has been sadly lacking. This document has been prepared by a team of subject matter experts to fill that void and to provide a starting point for providing a similar document for ASCI Red Storm in the future. This document is intended for SNL users who need to jumpstart their use of Janus and Janus-s.

  7. Red Lake Electric Coop, Inc | Open Energy Information

    Open Energy Info (EERE)

    Red Lake Electric Coop, Inc Jump to: navigation, search Name: Red Lake Electric Coop, Inc Place: Minnesota Phone Number: 218-253-2168 or 800-245-6068 Website: www.redlakeelectric.c...

  8. V-198: Red Hat Enterprise MRG Messaging Qpid Python Certificate...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    8: Red Hat Enterprise MRG Messaging Qpid Python Certificate Validation Flaw Lets Remote Users Conduct Man-in-the-Middle Attacks V-198: Red Hat Enterprise MRG Messaging Qpid Python...

  9. Red River Valley Coop Pwr Assn | Open Energy Information

    Open Energy Info (EERE)

    Red River Valley Coop Pwr Assn Jump to: navigation, search Name: Red River Valley Coop Pwr Assn Place: Minnesota Website: www.rrvcoop.com Facebook: https:www.facebook.comRRVCPA...

  10. Suzhou Red Maple Wind Blade Mould Co | Open Energy Information

    Open Energy Info (EERE)

    Red Maple Wind Blade Mould Co Jump to: navigation, search Name: Suzhou Red Maple Wind Blade Mould Co Place: Jiangsu Province, China Zip: 215400 Sector: Wind energy Product: Jiangsu...

  11. Characterization and Isolation of Constituents Causing Red Coloration in

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Desert Arroyo Seepage Water | Department of Energy Characterization and Isolation of Constituents Causing Red Coloration in Desert Arroyo Seepage Water Characterization and Isolation of Constituents Causing Red Coloration in Desert Arroyo Seepage Water Characterization and Isolation of Constituents Causing Red Coloration in Desert Arroyo Seepage Water Characterization and Isolation of Constituents Causing Red Coloration in Desert Arroyo Seepage Water (863.48 KB) More Documents &

  12. Red Cliffs Campground, Cedar City District, Utah | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Red Cliffs Campground, Cedar City District, Utah Red Cliffs Campground, Cedar City District, Utah Photo of Field Station at Red Cliffs Campground in Utah's Cedar City District The Bureau of Land Management (BLM) has remote field stations in Arizona, California, Utah, Idaho, and Alaska. This photograph shows the field station at Red Cliffs Campground in Utah's Cedar City District. Photovoltaic power systems allow the people working in these remote areas to have the convenience of continuous

  13. RedLeaf Resources Ecoshale Project | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    RedLeaf Resources Ecoshale Project RedLeaf Resources Ecoshale Project Overview of oil shale reserves, unique oil extraction issues, novel approach for cost-effective extraction deer08_patten.pdf (6.04 MB) More Documents & Publications Secure Fuels from Domestic Resources - Oil Shale and Tar Sands Oil Shale Research in the United States EERE: VTO - Red Leaf PNG Image

  14. Hidden values in bauxite residue (red mud): Recovery of metals

    SciTech Connect (OSTI)

    Liu, Yanju; Naidu, Ravi

    2014-12-15

    Highlights: • Current iron recovery techniques using red mud are depicted. • Advantages and disadvantages exist in different recovering processes. • Economic and environmental friendly integrated usage of red mud is promising. - Abstract: Bauxite residue (red mud) is a hazardous waste generated from alumina refining industries. Unless managed properly, red mud poses significant risks to the local environment due to its extreme alkalinity and its potential impacts on surface and ground water quality. The ever-increasing generation of red mud poses significant challenges to the aluminium industries from management perspectives given the low proportion that are currently being utilized beneficially. Red mud, in most cases, contains elevated concentrations of iron in addition to aluminium, titanium, sodium and valuable rare earth elements. Given the scarcity of iron supply globally, the iron content of red mud has attracted increasing research interest. This paper presents a critical overview of the current techniques employed for iron recovery from red mud. Information on the recovery of other valuable metals is also reviewed to provide an insight into the full potential usage of red mud as an economic resource rather than a waste. Traditional hydrometallurgy and pyrometallurgy are being investigated continuously. However, in this review several new techniques are introduced that consider the process of iron recovery from red mud. An integrated process which can achieve multiple additional values from red mud is much preferred over the single process methods. The information provided here should help to improve the future management and utilization of red mud.

  15. RedLeaf Resources Ecoshale Project

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    RedLeaf Resources Ecoshale Project Overview DEER 2008 Energy demand is exploding but "renewable energy" can't fill gap. Existing conventional oil production is "peaking" Lower extraction costs and demand have accelerated unconventional oil sands. * Unconventional Hydrocarbons - The hidden opportunity, oil industry consultancy Wood Mackenzie: "by 2025 unconventional oil is expected to supply more than 20% of global demand. Canada's UNCONVENTIONAL climb to the top of world

  16. redMaGiC. Selecting Luminous Red Galaxies from the DES Science Verification Data

    SciTech Connect (OSTI)

    Rozo, E.

    2015-07-20

    We introduce redMaGiC, an automated algorithm for selecting Luminous Red Galaxies (LRGs). The algorithm was developed to minimize photometric redshift uncertainties in photometric large-scale structure studies. redMaGiC achieves this by self-training the color-cuts necessary to produce a luminosity-thresholded LRG sam- ple of constant comoving density. Additionally, we demonstrate that redMaGiC photo-zs are very nearly as accurate as the best machine-learning based methods, yet they require minimal spectroscopic training, do not suffer from extrapolation biases, and are very nearly Gaussian. We apply our algorithm to Dark Energy Survey (DES) Science Verification (SV) data to produce a redMaGiC catalog sampling the redshift range z ϵ [0.2,0.8]. Our fiducial sample has a comoving space density of 10-3 (h-1Mpc)-3, and a median photo-z bias (zspec zphoto) and scatter (σz=(1 + z)) of 0.005 and 0.017 respectively.The corresponding 5σ outlier fraction is 1.4%. We also test our algorithm with Sloan Digital Sky Survey (SDSS) Data Release 8 (DR8) and Stripe 82 data, and discuss how spectroscopic training can be used to control photo-z biases at the 0.1% level.

  17. Redding Direct Interconnection Project, Shasta County, California:

    SciTech Connect (OSTI)

    Not Available

    1986-01-01

    As required under the California Environemtnal Quality Act (CEQA), the City of Redding (City) has prepared an Environmental Impact report (EIR) for the proposed Direct interconnection Project. Western Area Power Administration (Western) is also required to prepare an environmental assessment (EA) under the National Environmental Policy Act (NEPA) due to its involvement in the Project. Since the City has alrady prepared their EIR, this EA will briefly summarize the impact assessment field work and findings from the City's EIR. The EIR is attached as an appendix to this EA. 21 refs., 20 figs., 10 tabs.

  18. Blue, green, orange, and red upconversion laser

    DOE Patents [OSTI]

    Xie, Ping; Gosnell, Timothy R.

    1998-01-01

    A laser for outputting visible light at the wavelengths of blue, green, orange and red light. This is accomplished through the doping of a substrate, such as an optical fiber or waveguide, with Pr.sup.3+ ions and Yb.sup.3+ ions. A light pump such as a diode laser is used to excite these ions into energy states which will produce lasing at the desired wavelengths. Tuning elements such as prisms and gratings can be employed to select desired wavelengths for output.

  19. Blue, green, orange, and red upconversion laser

    DOE Patents [OSTI]

    Xie, P.; Gosnell, T.R.

    1998-09-08

    A laser is disclosed for outputting visible light at the wavelengths of blue, green, orange and red light. This is accomplished through the doping of a substrate, such as an optical fiber or waveguide, with Pr{sup 3+} ions and Yb{sup 3+} ions. A light pump such as a diode laser is used to excite these ions into energy states which will produce lasing at the desired wavelengths. Tuning elements such as prisms and gratings can be employed to select desired wavelengths for output. 11 figs.

  20. Solving Petascale Public Health and Safety Problems Using Uintah | Argonne

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Leadership Computing Facility Pressure profile of a deflagration to detonation transition in an array of tightly packed PBX9501 cylinders confined by symmetric boundaries on all sides. Pressure profile of a deflagration to detonation transition in an array of tightly packed PBX9501 cylinders confined by symmetric boundaries on all sides. Detonation can be seen in red. Solving Petascale Public Health and Safety Problems Using Uintah PI Name: Martin Berzins PI Email: mb@sci.utah.edu

  1. The Guderley problem revisited

    SciTech Connect (OSTI)

    Ramsey, Scott D [Los Alamos National Laboratory; Kamm, James R [Los Alamos National Laboratory; Bolstad, John H [NON LANL

    2009-01-01

    The self-similar converging-diverging shock wave problem introduced by Guderley in 1942 has been the source of numerous investigations since its publication. In this paper, we review the simplifications and group invariance properties that lead to a self-similar formulation of this problem from the compressible flow equations for a polytropic gas. The complete solution to the self-similar problem reduces to two coupled nonlinear eigenvalue problems: the eigenvalue of the first is the so-called similarity exponent for the converging flow, and that of the second is a trajectory multiplier for the diverging regime. We provide a clear exposition concerning the reflected shock configuration. Additionally, we introduce a new approximation for the similarity exponent, which we compare with other estimates and numerically computed values. Lastly, we use the Guderley problem as the basis of a quantitative verification analysis of a cell-centered, finite volume, Eulerian compressible flow algorithm.

  2. Redding Electric- Residential and Commercial Energy Efficiency Rebate Program

    Broader source: Energy.gov [DOE]

    Redding Electric Utility offers a variety of financial incentives for energy efficiency through its Residential and Commercial Rebate Programs. Rebates are for weatherization measures, HVAC...

  3. Microsoft Word - RED_Book_FY08_FINAL.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    16 Page i Bonneville Power Administration Conservation RESOURCE ENERGY DATA (The RED Book) INTRODUCTION On December 5, 1980, the 96 th Congress passed the Pacific Northwest...

  4. Red Bank, New Jersey: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    (Redirected from Red Bank, NJ) Jump to: navigation, search Equivalent URI DBpedia Coordinates 40.3470543, -74.0643065 Show Map Loading map... "minzoom":false,"mappingservice":...

  5. Kevin Redding | Center for Bio-Inspired Solar Fuel Production

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Ana Moore Anne Jones Devens Gust Don Seo Giovanna Ghirlanda Hao Yan James Allen Kevin Redding Petra Fromme Thomas Moore Yan Liu Kevin Redding Associate Director of the Center Principal Investigator Phone: 480-965-0136 Fax: 480-965-2747 E-mail: kevin.redding@asu.edu Associate Professor Kevin Redding contributes to the EFRC in the area of management as an Associate Director of the Center. As a Principal Investigator of the Center he is primarily focussed on the area of EPR analysis of the

  6. JLab to host Red Cross Blood Drive | Jefferson Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    to host Red Cross Blood Drive JLab to host Red Cross Blood Drive on Aug. 16 The next American Red Cross Blood Drive taking place at Jefferson Lab will be held on Tuesday, Aug. 16, from 10 a.m. to 4 p.m. in CEBAF Center, Room F113. New and repeat donors are encouraged to attend. Walk-ins are welcome. All participation is appreciated as the Red Cross has a significant blood shortage. Please visit this webpage for eligibility requirements:

  7. Sandia National Laboratories Problem

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Problem Natural disasters such as Hurricane Katrina in New Orleans and the tsunami in Japan in 2011 create emergency situations that must be dealt with quickly and effectively in...

  8. Bicriteria network design problems

    SciTech Connect (OSTI)

    Marathe, M.V.; Ravi, R.; Sundaram, R.; Ravi, S.S.; Rosenkrantz, D.J.; Hunt, H.B. III

    1997-11-20

    The authors study a general class of bicriteria network design problems. A generic problem in this class is as follows: Given an undirected graph and two minimization objectives (under different cost functions), with a budget specified on the first, find a subgraph from a given subgraph class that minimizes the second objective subject to the budget on the first. They consider three different criteria -- the total edge cost, the diameter and the maximum degree of the network. Here, they present the first polynomial-time approximation algorithms for a large class of bicriteria network design problems for the above mentioned criteria. The following general types of results are presented. First, they develop a framework for bicriteria problems and their approximations. Second, when the two criteria are the same they present a black box parametric search technique. This black box takes in as input an (approximation) algorithm for the criterion situation and generates an approximation algorithm for the bicriteria case with only a constant factor loss in the performance guarantee. Third, when the two criteria are the diameter and the total edge costs they use a cluster based approach to devise approximation algorithms. The solutions violate both the criteria by a logarithmic factor. Finally, for the class of treewidth-bounded graphs, they provide pseudopolynomial-time algorithms for a number of bicriteria problems using dynamic programming. The authors show how these pseudopolynomial-time algorithms can be converted to fully polynomial-time approximation schemes using a scaling technique.

  9. Dynamical impurity problems

    SciTech Connect (OSTI)

    Emery, V.J.; Kivelson, S.A.

    1993-12-31

    In the past few years there has been a resurgence of interest in dynamical impurity problems, as a result of developments in the theory of correlated electron systems. The general dynamical impurity problem is a set of conduction electrons interacting with an impurity which has internal degrees of freedom. The simplest and earliest example, the Kondo problem, has attracted interest since the mid-sixties not only because of its physical importance but also as an example of a model displaying logarithmic divergences order by order in perturbation theory. It provided one of the earliest applications of the renormalization group method, which is designed to deal with just such a situation. As we shall see, the antiferromagnetic Kondo model is controlled by a strong-coupling fixed point, and the essence of the renormalization group solution is to carry out the global renormalization numerically starting from the original (weak-coupling) Hamiltonian. In these lectures, we shall describe an alternative route in which we identify an exactly solvable model which renormalizes to the same fixed point as the original dynamical impurity problem. This approach is akin to determining the critical behavior at a second order phase transition point by solving any model in a given universality class.

  10. U-159: Red Hat Enterprise MRG Messaging Qpid Bug Lets Certain...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    9: Red Hat Enterprise MRG Messaging Qpid Bug Lets Certain Remote Users Bypass Authentication U-159: Red Hat Enterprise MRG Messaging Qpid Bug Lets Certain Remote Users Bypass...

  11. V-163: Red Hat Network Satellite Server Inter-Satellite Sync...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    3: Red Hat Network Satellite Server Inter-Satellite Sync Remote Authentication Bypass V-163: Red Hat Network Satellite Server Inter-Satellite Sync Remote Authentication Bypass May...

  12. The inhibiting bisection problem.

    SciTech Connect (OSTI)

    Pinar, Ali

    2010-11-01

    Given a graph where each vertex is assigned a generation or consumption volume, we try to bisect the graph so that each part has a significant generation/consumption mismatch, and the cutsize of the bisection is small. Our motivation comes from the vulnerability analysis of distribution systems such as the electric power system. We show that the constrained version of the problem, where we place either the cutsize or the mismatch significance as a constraint and optimize the other, is NP-complete, and provide an integer programming formulation. We also propose an alternative relaxed formulation, which can trade-off between the two objectives and show that the alternative formulation of the problem can be solved in polynomial time by a maximum flow solver. Our experiments with benchmark electric power systems validate the effectiveness of our methods.

  13. Sandia National Laboratories Problem

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Sandia National Laboratories Problem Natural disasters such as Hurricane Katrina in New Orleans and the tsunami in Japan in 2011 create emergency situations that must be dealt with quickly and effectively in order to minimize injury and loss of life. Simulating such events before they occur can help emergency responders fine-tune their preparations. To create the most accurate modeling scenarios, exercise planners need to know critical details of the event, such as infrastructure damage and

  14. GRAND CHALLENGE PROBLEMS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    GRAND CHALLENGE PROBLEMS Time is the biggest issue. Materials typically become critical in a matter of months, but solutions take years or decades to develop and implement. Our first two grand challenges address this discrepancy. Anticipating Which Materials May Go Critical In an ideal world, users of materials would anticipate supply-chain disruptions before they occur. They would undertake activities to manage the risks of disruption, including R&D to diversify and increase supplies or to

  15. Red River Valley REA- Heat Pump Loan Program

    Broader source: Energy.gov [DOE]

    The Red River Valley Rural Electric Association (RRVREA) offers a loan program to its members for air-source and geothermal heat pumps. Loans are available for geothermal heat pumps at a 5% fixed...

  16. Red River Parish, Louisiana: Energy Resources | Open Energy Informatio...

    Open Energy Info (EERE)

    Hide Map This article is a stub. You can help OpenEI by expanding it. Red River Parish is a county in Louisiana. Its FIPS County Code is 081. It is classified as...

  17. Red Bank, New Jersey: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Hide Map This article is a stub. You can help OpenEI by expanding it. Red Bank is a borough in Monmouth County, New Jersey. It falls under New Jersey's 6th...

  18. Red River Valley Rrl Elec Assn | Open Energy Information

    Open Energy Info (EERE)

    Elec Assn Jump to: navigation, search Name: Red River Valley Rrl Elec Assn Place: Oklahoma Phone Number: 1-800-749-3364 or 580-564-1800 Website: www.rrvrea.com Twitter:...

  19. Red River County, Texas: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Hide Map This article is a stub. You can help OpenEI by expanding it. Red River County is a county in Texas. Its FIPS County Code is 387. It is classified as...

  20. Red Feather Lakes, Colorado: Energy Resources | Open Energy Informatio...

    Open Energy Info (EERE)

    Hide Map This article is a stub. You can help OpenEI by expanding it. Red Feather Lakes is a census-designated place in Larimer County, Colorado.1 References...

  1. Red Willow County, Nebraska: Energy Resources | Open Energy Informatio...

    Open Energy Info (EERE)

    Hide Map This article is a stub. You can help OpenEI by expanding it. Red Willow County is a county in Nebraska. Its FIPS County Code is 145. It is classified as...

  2. City of Red Bud, Illinois (Utility Company) | Open Energy Information

    Open Energy Info (EERE)

    Bud, Illinois (Utility Company) Jump to: navigation, search Name: Red Bud City of Place: Illinois Phone Number: 618.282.3339 or 618.282.2315 Website: www.cityofredbud.orgdepartmen...

  3. Red Mesa, Arizona: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Hide Map This article is a stub. You can help OpenEI by expanding it. Red Mesa is a census-designated place in Apache County, Arizona.1 References US...

  4. Red Hill, Pennsylvania: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Hide Map This article is a stub. You can help OpenEI by expanding it. Red Hill is a borough in Montgomery County, Pennsylvania. It falls under Pennsylvania's...

  5. Red Lake County, Minnesota: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Hide Map This article is a stub. You can help OpenEI by expanding it. Red Lake County is a county in Minnesota. Its FIPS County Code is 125. It is classified as...

  6. Microsoft Word - RED_Book_FY11_FINAL without cover

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    E V I L L E P O W E R A D M I N I S T R A T I O N Conservation Resource Energy Data The RED Book Fiscal Year 2011 Table of Contents INTRODUCTION ......

  7. Red Butte, Wyoming: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Hide Map This article is a stub. You can help OpenEI by expanding it. Red Butte is a census-designated place in Natrona County, Wyoming. It falls under Wyoming's...

  8. Red Bank, Tennessee: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Hide Map This article is a stub. You can help OpenEI by expanding it. Red Bank is a city in Hamilton County, Tennessee. It falls under Tennessee's 3rd...

  9. Red Cliff, Colorado: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Hide Map This article is a stub. You can help OpenEI by expanding it. Red Cliff is a town in Eagle County, Colorado. It falls under Colorado's 2nd congressional...

  10. Western Red-tailed Skink Distribution in Southern Nevada

    SciTech Connect (OSTI)

    Hall, D. B. and Gergor, P. D.

    2011-11-01

    This slide show reports a study to: determine Western Red-tailed Skink (WRTS) distribution on Nevada National Security Site (NNSS); identify habitat where WRTS occur; learn more about WRTS natural history; and document distribution of other species.

  11. Red Storm usage model :Version 1.12.

    SciTech Connect (OSTI)

    Jefferson, Karen L.; Sturtevant, Judith E.

    2005-12-01

    Red Storm is an Advanced Simulation and Computing (ASC) funded massively parallel supercomputer located at Sandia National Laboratories (SNL). The Red Storm Usage Model (RSUM) documents the capabilities and the environment provided for the FY05 Tri-Lab Level II Limited Availability Red Storm User Environment Milestone and the FY05 SNL Level II Limited Availability Red Storm Platform Milestone. This document describes specific capabilities, tools, and procedures to support both local and remote users. The model is focused on the needs of the ASC user working in the secure computing environments at Los Alamos National Laboratory (LANL), Lawrence Livermore National Laboratory (LLNL), and SNL. Additionally, the Red Storm Usage Model maps the provided capabilities to the Tri-Lab ASC Computing Environment (ACE) requirements. The ACE requirements reflect the high performance computing requirements for the ASC community and have been updated in FY05 to reflect the community's needs. For each section of the RSUM, Appendix I maps the ACE requirements to the Limited Availability User Environment capabilities and includes a description of ACE requirements met and those requirements that are not met in that particular section. The Red Storm Usage Model, along with the ACE mappings, has been issued and vetted throughout the Tri-Lab community.

  12. Assessment of Biomass Energy Opportunities for the Red Lake Band of Chippewa Indians

    SciTech Connect (OSTI)

    Scott Haase

    2005-09-30

    Assessment of biomass energy and biobased product manufacturing opportunities for the Red Lake Tribe.

  13. T-678: Red Hat Enterprise Virtualization Hypervisor VLAN Packet Processing Flaw Lets Remote Users Deny Service

    Office of Energy Efficiency and Renewable Energy (EERE)

    Red Hat Enterprise Virtualization Hypervisor VLAN Packet Processing Flaw Lets Remote Users Deny Service.

  14. The Inhibiting Bisection Problem

    SciTech Connect (OSTI)

    Pinar, Ali; Fogel, Yonatan; Lesieutre, Bernard

    2006-12-18

    Given a graph where each vertex is assigned a generation orconsumption volume, we try to bisect the graph so that each part has asignificant generation/consumption mismatch, and the cutsize of thebisection is small. Our motivation comes from the vulnerability analysisof distribution systems such as the electric power system. We show thatthe constrained version of the problem, where we place either the cutsizeor the mismatch significance as a constraint and optimize the other, isNP-complete, and provide an integer programming formulation. We alsopropose an alternative relaxed formulation, which can trade-off betweenthe two objectives and show that the alternative formulation of theproblem can be solved in polynomial time by a maximum flow solver. Ourexperiments with benchmark electric power systems validate theeffectiveness of our methods.

  15. 21PF overpack problems

    SciTech Connect (OSTI)

    Kovac, F.M.

    1995-12-31

    The 21PF overpack has had severe metal corrosion and stress corrosion cracking (SCC) for many years. The US Department of Transportation (DOT) and the US Nuclear Regulatory Commission (NRC) have disallowed the use of overpacks containing high chloride foam. Corrosion and SCC of 21PF overpacks have been documented and papers have been presented at conferences about these issues. Regulatory agencies have restricted 21PF overpack use and have requested data to determine if phenolic foam overpacks not meeting original design specifications will be authorized for continued use. This paper details some of the problems experienced by users and relates actions of the DOT and NRC concerning these packages. Industry is working to correct deficiencies, but if they are not successful, the entire uranium enrichment industry will be severely impacted.

  16. Red phosphors for use in high CRI fluorescent lamps

    DOE Patents [OSTI]

    Srivastava, Alok; Comanzo, Holly; Manivannan, Vankatesan; Setlur, Anant Achyut

    2005-11-15

    Novel red emitting phosphors for use in fluorescent lamps resulting in superior color rendering index values compared to conventional red phosphors. Also disclosed is a fluorescent lamp including a phosphor layer comprising blends of one or more of a blue phosphor, a blue-green phosphor, a green phosphor and a red a phosphor selected from the group consisting of SrY.sub.2 O.sub.4 :Eu.sup.3+, (Y,Gd)Al.sub.3 B.sub.4 O.sub.12 :Eu.sup.3+, and [(Y.sub.1-x-y-m La.sub.y)Gd.sub.x ]BO.sub.3 :Eu.sub.m wherein y<0.50 and m=0.001-0.3. The phosphor layer can optionally include an additional deep red phosphor and a yellow emitting phosphor. The resulting lamp will exhibit a white light having a color rendering index of 90 or higher with a correlated color temperature of from 2500 to 10000 Kelvin. The use of the disclosed red phosphors in phosphor blends of lamps results in high CRI light sources with increased stability and acceptable lumen maintenance over the course of the lamp life.

  17. Smoothing of mixed complementarity problems

    SciTech Connect (OSTI)

    Gabriel, S.A.; More, J.J.

    1995-09-01

    The authors introduce a smoothing approach to the mixed complementarity problem, and study the limiting behavior of a path defined by approximate minimizers of a nonlinear least squares problem. The main result guarantees that, under a mild regularity condition, limit points of the iterates are solutions to the mixed complementarity problem. The analysis is applicable to a wide variety of algorithms suitable for large-scale mixed complementarity problems.

  18. American Red Cross Blood Drive Hanford Health and Safety Exposition

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Red Cross Blood Drive Hanford Health and Safety Exposition 6600 Burden Blvd. - TRAC Center Tuesday,May13,2014 10:00 AM - 3:00 PM To schedule your appointment go online to www.redcrossblood.org/make- donation, enter EXPO for sponsor code and follow further instructions. redcrossblood.org I 1-800-RED CROSS (1-800 - 733-2767) [!] ........ Use your smartphone to scan the OR code at left, or go to redcrossblood .org/social to follow us on Facebook and Twitter. Identif ication is requ ired to don ate.

  19. Method for determining properties of red blood cells

    DOE Patents [OSTI]

    Gourley, Paul L.

    2001-01-01

    A method for quantifying the concentration of hemoglobin in a cell, and indicia of anemia, comprises determining the wavelength of the longitudinal mode of a liquid in a laser microcavity; determining the wavelength of the fundamental transverse mode of a red blood cell in the liquid in the laser microcavity; and determining if the cell is anemic from the difference between the wavelength of the longitudinal mode and the fundamental transverse mode. In addition to measuring hemoglobin, the invention includes a method using intracavity laser spectroscopy to measure the change in spectra as a function of time for measuring the influx of water into a red blood cell and the cell's subsequent rupture.

  20. Los Alamos laser instrument arrives on Red Planet's surface

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Laser instrument arrives on Red Planet's surface Los Alamos laser instrument arrives on Red Planet's surface The ChemCam laser characterization instrument was developed at LANL and the French space institute, IRAP. August 6, 2012 Curiosity zaps Mars for vital signs: ChemCam, designed by Lab team, looks for elements such as carbon, nitrogen, and oxygen, all of which are crucial for life. Curiosity zaps Mars for vital signs: ChemCam, designed by Lab team, looks for elements such as carbon,

  1. About an Optimal Visiting Problem

    SciTech Connect (OSTI)

    Bagagiolo, Fabio Benetton, Michela

    2012-02-15

    In this paper we are concerned with the optimal control problem consisting in minimizing the time for reaching (visiting) a fixed number of target sets, in particular more than one target. Such a problem is of course reminiscent of the famous 'Traveling Salesman Problem' and brings all its computational difficulties. Our aim is to apply the dynamic programming technique in order to characterize the value function of the problem as the unique viscosity solution of a suitable Hamilton-Jacobi equation. We introduce some 'external' variables, one per target, which keep in memory whether the corresponding target is already visited or not, and we transform the visiting problem in a suitable Mayer problem. This fact allows us to overcome the lacking of the Dynamic Programming Principle for the originary problem. The external variables evolve with a hysteresis law and the Hamilton-Jacobi equation turns out to be discontinuous.

  2. New red phosphor for near-ultraviolet light-emitting diodes with high color-purity

    SciTech Connect (OSTI)

    Wang, Zhengliang; He, Pei; Wang, Rui; Zhao, Jishou; Gong, Menglian

    2010-02-15

    New red phosphors, Na{sub 5}Eu(MoO{sub 4}){sub 4} doped with boron oxide were prepared by the solid-state reaction. Their structure and photo-luminescent properties were investigated. With the introduction of boron oxide, the red emission intensity of the phosphors under 395 nm excitation is strengthened, with high color-purity (x = 0.673, y = 0.327). The single red light-emitting diode was obtained by combining InGaN chip with the red phosphor, bright red light can be observed by naked eyes from the red light-emitting diodes under a forward bias of 20 mA.

  3. Magnetic braking of stellar cores in red giants and supergiants

    SciTech Connect (OSTI)

    Maeder, André; Meynet, Georges E-mail: georges.meynet@unige.ch

    2014-10-01

    Magnetic configurations, stable on the long term, appear to exist in various evolutionary phases, from main-sequence stars to white dwarfs and neutron stars. The large-scale ordered nature of these fields, often approximately dipolar, and their scaling according to the flux conservation scenario favor a fossil field model. We make some first estimates of the magnetic coupling between the stellar cores and the outer layers in red giants and supergiants. Analytical expressions of the truncation radius of the field coupling are established for a convective envelope and for a rotating radiative zone with horizontal turbulence. The timescales of the internal exchanges of angular momentum are considered. Numerical estimates are made on the basis of recent model grids. The direct magnetic coupling of the core to the extended convective envelope of red giants and supergiants appears unlikely. However, we find that the intermediate radiative zone is fully coupled to the core during the He-burning and later phases. This coupling is able to produce a strong spin down of the core of red giants and supergiants, also leading to relatively slowly rotating stellar remnants such as white dwarfs and pulsars. Some angular momentum is also transferred to the outer convective envelope of red giants and supergiants during the He-burning phase and later.

  4. AmeriFlux US-Wi4 Mature red pine (MRP) (Dataset) | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    Wi4 Mature red pine (MRP) Citation Details In-Document Search Title: AmeriFlux US-Wi4 Mature red pine (MRP) This is the AmeriFlux version of the carbon flux data for the site ...

  5. RedSeal Comments on "Smart Grid RFI: Addressing Policy and Logistical...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    RedSeal Comments on "Smart Grid RFI: Addressing Policy and Logistical Challenges. RedSeal's core technology is the ability to understand the access control of the network as a ...

  6. EVMS Training Snippet: 5.7 PARSII Analysis: OAPM Red Yellow Report...

    Office of Environmental Management (EM)

    7 PARSII Analysis: OAPM Red Yellow Report EVMS Training Snippet: 5.7 PARSII Analysis: OAPM Red Yellow Report This EVMS Training Snippet, sponsored by the Office of Project ...

  7. EERE Success Story-Nationwide: Slashing Red Tape To Speed Solar...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Slashing Red Tape To Speed Solar Deployment for Homes and Businesses EERE Success Story-Nationwide: Slashing Red Tape To Speed Solar Deployment for Homes and Businesses January 24, ...

  8. T-712: Red Hat Enterprise MRG Grid 2.0 security, bug fix and...

    Office of Environmental Management (EM)

    A local user can access the broker password. PLATFORM: Red Hat Enterprise MRG v2 for Red ... A local user can access the file to obtain the broker username and password. A local user ...

  9. Red Lake Band of Chippewa Indians- 2003 Project

    Broader source: Energy.gov [DOE]

    The Red Lake Band of Chippewa Indians, located in the northwest corner of Minnesota near the Canadian border, will assess the potential to expand the use of biomass resources for energy autonomy and economic development on tribal lands. Specifically, the tribe will evaluate the technical, market, financial, and cultural aspects of using its extensive, forested lands to create a sustainable bioproducts-based business and will develop a business plan to guide tribal industry development.

  10. RedSeal Comments on "Smart Grid RFI: Addressing Policy and Logistical

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Challenges. | Department of Energy RedSeal Comments on "Smart Grid RFI: Addressing Policy and Logistical Challenges. RedSeal Comments on "Smart Grid RFI: Addressing Policy and Logistical Challenges. RedSeal Comments on "Smart Grid RFI: Addressing Policy and Logistical Challenges. RedSeal's core technology is the ability to understand the access control of the network as a whole - not simply the behavior of a single device. RedSeal analyzes the interactions of firewalls,

  11. Problem

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    They can reduce the size and weight of existing next-generation smart grid power electronics systems, allowing greater application in such areas as weapons systems and pulsed...

  12. Problem

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    In addition, Sandia's method is compatible with conventional spray processing and, ... process include high-definition flat panel displays, sensor coatings for both ...

  13. Problem

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    energy solutions, Sandia and Princeton Power Systems have teamed up to develop the Demand Response Inverter (DRI). Innovative Edge The DRI is a power flow control system...

  14. Problem

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    But what if the batteries had the ability to recharge themselves? What if they were covered by a thin photovoltaic (PV) film that could harvest energy from the sun? Just as on ...

  15. Method using CO for extending the useful shelf-life of refrigerated red blood cells

    DOE Patents [OSTI]

    Bitensky, M.W.

    1995-12-19

    A method is disclosed using CO for extending the useful shelf-life of refrigerated red blood cells. Carbon monoxide is utilized for stabilizing hemoglobin in red blood cells to be stored at low temperature. Changes observed in the stored cells are similar to those found in normal red cell aging in the body, the extent thereof being directly related to the duration of refrigerated storage. Changes in cell buoyant density, vesiculation, and the tendency of stored cells to bind autologous IgG antibody directed against polymerized band 3 IgG, all of which are related to red blood cell senescence and increase with refrigerated storage time, have been substantially slowed when red blood cells are treated with CO. Removal of the carbon monoxide from the red blood cells is readily and efficiently accomplished by photolysis in the presence of oxygen so that the stored red blood cells may be safely transfused into a recipient. 5 figs.

  16. Method using CO for extending the useful shelf-life of refrigerated red blood cells

    DOE Patents [OSTI]

    Bitensky, Mark W.

    1995-01-01

    Method using CO for extending the useful shelf-life of refrigerated red blood cells. Carbon monoxide is utilized for stabilizing hemoglobin in red blood cells to be stored at low temperature. Changes observed in the stored cells are similar to those found in normal red cell aging in the body, the extent thereof being directly related to the duration of refrigerated storage. Changes in cell buoyant density, vesiculation, and the tendency of stored cells to bind autologous IgG antibody directed against polymerized band 3 IgG, all of which are related to red blood cell senescence and increase with refrigerated storage time, have been substantially slowed when red blood cells are treated with CO. Removal of the carbon monoxide from the red blood cells is readily and efficiently accomplished by photolysis in the presence of oxygen so that the stored red blood cells may be safely transfused into a recipient.

  17. Quantum Computing: Solving Complex Problems

    ScienceCinema (OSTI)

    DiVincenzo, David [IBM Watson Research Center

    2009-09-01

    One of the motivating ideas of quantum computation was that there could be a new kind of machine that would solve hard problems in quantum mechanics. There has been significant progress towards the experimental realization of these machines (which I will review), but there are still many questions about how such a machine could solve computational problems of interest in quantum physics. New categorizations of the complexity of computational problems have now been invented to describe quantum simulation. The bad news is that some of these problems are believed to be intractable even on a quantum computer, falling into a quantum analog of the NP class. The good news is that there are many other new classifications of tractability that may apply to several situations of physical interest.

  18. Surrogate Guderley Test Problem Definition

    SciTech Connect (OSTI)

    Ramsey, Scott D.; Shashkov, Mikhail J.

    2012-07-06

    The surrogate Guderley problem (SGP) is a 'spherical shock tube' (or 'spherical driven implosion') designed to ease the notoriously subtle initialization of the true Guderley problem, while still maintaining a high degree of fidelity. In this problem (similar to the Guderley problem), an infinitely strong shock wave forms and converges in one-dimensional (1D) cylindrical or spherical symmetry through a polytropic gas with arbitrary adiabatic index {gamma}, uniform density {rho}{sub 0}, zero velocity, and negligible pre-shock pressure and specific internal energy (SIE). This shock proceeds to focus on the point or axis of symmetry at r = 0 (resulting in ostensibly infinite pressure, velocity, etc.) and reflect back out into the incoming perturbed gas.

  19. WHAT DOES CLUSTERING TELL US ABOUT THE BUILDUP OF THE RED SEQUENCE?

    SciTech Connect (OSTI)

    Tinker, Jeremy L.; Wetzel, Andrew R.

    2010-08-10

    We analyze the clustering of red and blue galaxies from four samples spanning a redshift range of 0.4 < z < 2.0 to test the various scenarios by which galaxies evolve onto the red sequence. The data are taken from the UKIDSS Ultra Deep Survey, DEEP2, and COMBO-17. The use of clustering allows us to determine what fraction of the red sequence is made up of central galaxies and satellite galaxies. At all redshifts, including z = 0, the data are consistent with {approx}60% of satellite galaxies being red or quenched, implying that {approx}1/3 of the red sequence is comprised of satellite galaxies. More than three-fourths of red satellite galaxies were moved to the red sequence after they were accreted onto a larger halo. The constant fraction of satellite galaxies that are red yields a quenching time for satellite galaxies that depends on redshift in the same way as halo dynamical times: t{sub Q} {approx} (1 + z){sup -1.5}. In three of the four samples, the data favor a model in which red central galaxies are a random sample of all central galaxies; there is no preferred halo mass scale at which galaxies make the transition from star-forming to red and dead. The large errors on the fourth sample inhibit any conclusions. Theoretical models in which star formation is quenched above a critical halo mass are excluded by these data. A scenario in which mergers create red central galaxies imparts a weaker correlation between halo mass and central galaxy color, but even the merger scenario creates tension with red galaxy clustering at redshifts above 0.5. These results suggest that the mechanism by which central galaxies become red evolves from z = 0.5 to z = 0.

  20. Red Lake Band of Chippewa Indians- 2005 Project

    Broader source: Energy.gov [DOE]

    Nearly 60% of the 1,621 housing units on the reservation lack adequate insulation, ventilation, and efficient and safe furnaces and appliances. The project will achieve the following objectives: (1) to enhance tribal member energy expertise for reducing tribal energy consumption and for implementing energy efficiency measures, (2) to increase the tribe's capacity to secure additional funding for energy conservation, including state-sponsored investments, and (3) to create significant energy savings in tribal homes and promote economic and environmental opportunities to sustain Red Lake.

  1. The digital trigger system for the RED-100 detector

    SciTech Connect (OSTI)

    Naumov, P. P. Akimov, D. Yu.; Belov, V. A.; Bolozdynya, A. I.; Efremenko, Yu. V.; Kaplin, V. A.

    2015-12-15

    The system for forming a trigger for the liquid xenon detector RED-100 is developed. The trigger can be generated for all types of events that the detector needs for calibration and data acquisition, including the events with a single electron of ionization. In the system, a mechanism of event detection is implemented according to which the timestamp and event type are assigned to each event. The trigger system is required in the systems searching for rare events to select and keep only the necessary information from the ADC array. The specifications and implementation of the trigger unit which provides a high efficiency of response even to low-energy events are considered.

  2. Challenge problems for artificial intelligence

    SciTech Connect (OSTI)

    Selman, B.; Brooks, R.A.; Dean, T.

    1996-12-31

    AI textbooks and papers of ten discuss the big questions, such as {open_quotes}how to reason with uncertainty{close_quotes}, {open_quotes}how to reason efficiently{close_quotes}, or {open_quotes}how to improve performance through learning.{close_quotes} It is more difficult, however, to find descriptions of concrete problems or challenges that are still ambitious and interesting, yet not so open-ended. The goal of this panel is to formulate a set of such challenge problems for the field. Each panelist was asked to formulate one or more challenges. The emphasis is on problems for which there is a good chance that they will be resolved within the next five to ten years.

  3. Cosmological information in the intrinsic alignments of luminous red galaxies

    SciTech Connect (OSTI)

    Chisari, Nora Elisa; Dvorkin, Cora E-mail: cdvorkin@ias.edu

    2013-12-01

    The intrinsic alignments of galaxies are usually regarded as a contaminant to weak gravitational lensing observables. The alignment of Luminous Red Galaxies, detected unambiguously in observations from the Sloan Digital Sky Survey, can be reproduced by the linear tidal alignment model of Catelan, Kamionkowski and Blandford (2001) on large scales. In this work, we explore the cosmological information encoded in the intrinsic alignments of red galaxies. We make forecasts for the ability of current and future spectroscopic surveys to constrain local primordial non-Gaussianity and Baryon Acoustic Oscillations (BAO) in the cross-correlation function of intrinsic alignments and the galaxy density field. For the Baryon Oscillation Spectroscopic Survey, we find that the BAO signal in the intrinsic alignments is marginally significant with a signal-to-noise ratio of 1.8 and 2.2 with the current LOWZ and CMASS samples of galaxies, respectively, and increasing to 2.3 and 2.7 once the survey is completed. For the Dark Energy Spectroscopic Instrument and for a spectroscopic survey following the EUCLID redshift selection function, we find signal-to-noise ratios of 12 and 15, respectively. Local type primordial non-Gaussianity, parametrized by f{sub NL} = 10, is only marginally significant in the intrinsic alignments signal with signal-to-noise ratios < 2 for the three surveys considered.

  4. Sour landfill gas problem solved

    SciTech Connect (OSTI)

    Nagl, G.; Cantrall, R.

    1996-05-01

    In Broward County, Fla., near Pompano Beach, Waste Management of North America (WMNA, a subsidiary of WMX Technologies, Oak Brook, IL) operates the Central Sanitary Landfill and Recycling Center, which includes the country`s largest landfill gas-to-energy plant. The landfill consists of three collection sites: one site is closed, one is currently receiving garbage, and one will open in the future. Approximately 9 million standard cubic feet (scf) per day of landfill gas is collected from approximately 300 wells spread over the 250-acre landfill. With a dramatic increase of sulfur-containing waste coming to a South Florida landfill following Hurricane Andrew, odors related to hydrogen sulfide became a serious problem. However, in a matter of weeks, an innovative desulfurization unit helped calm the landfill operator`s fears. These very high H{sub 2}S concentrations caused severe odor problems in the surrounding residential area, corrosion problems in the compressors, and sulfur dioxide (SO{sub 2}) emission problems in the exhaust gas from the turbine generators.

  5. Substation automation problems and possibilities

    SciTech Connect (OSTI)

    Smith, H.L.

    1996-10-01

    The evolutionary growth in the use and application of microprocessors in substations has brought the industry to the point of considering integrated substation protection, control, and monitoring systems. An integrated system holds the promise of greatly reducing the design, documentation, and implementation cost for the substation control, protection, and monitoring systems. This article examines the technical development path and the present implementation problems.

  6. RSE Pulp & Chemical, LLC (Subsidiary of Red Shield Environmental, LLC) |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy RSE Pulp & Chemical, LLC (Subsidiary of Red Shield Environmental, LLC) RSE Pulp & Chemical, LLC (Subsidiary of Red Shield Environmental, LLC) A fact sheet detailling a proposal of a biorefinery facility in an existing pulp mill to demonstrate the production of cellulosic ethanol from lignocellulosic (wood) extract. RSE Pulp & Chemical, LLC (Subsidiary of Red Shield Environmental, LLC) (19.31 KB) More Documents & Publications Pacific Ethanol, Inc EA-1888:

  7. Measurement of interaction forces between red blood cells in aggregates by optical tweezers

    SciTech Connect (OSTI)

    Maklygin, A Yu; Priezzhev, A V; Karmenian, A; Nikitin, Sergei Yu; Obolenskii, I S; Lugovtsov, Andrei E; Kisun Li

    2012-06-30

    We have fabricated double-beam optical tweezers and demonstrated the possibility of their use for measuring the interaction forces between red blood cells (erythrocytes). It has been established experimentally that prolonged trapping of red blood cells in a tightly focused laser beam does not cause any visible changes in their shape or size. We have measured the interaction between red blood cells in the aggregate, deformed by optical tweezers.

  8. Measuring skewness of red blood cell deformability distribution by laser ektacytometry

    SciTech Connect (OSTI)

    Nikitin, S Yu; Priezzhev, A V; Lugovtsov, A E; Ustinov, V D

    2014-08-31

    An algorithm is proposed for measuring the parameters of red blood cell deformability distribution based on laser diffractometry of red blood cells in shear flow (ektacytometry). The algorithm is tested on specially prepared samples of rat blood. In these experiments we succeeded in measuring the mean deformability, deformability variance and skewness of red blood cell deformability distribution with errors of 10%, 15% and 35%, respectively. (laser biophotonics)

  9. U-159: Red Hat Enterprise MRG Messaging Qpid Bug Lets Certain Remote Users Bypass Authentication

    Broader source: Energy.gov [DOE]

    A vulnerability was reported in Red Hat Enterprise MRG Messaging. A remote user can access cluster messages and view the internal configuration.

  10. From: Meredith Brown Subject: Red Alert: Contaminatio...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Meredith Brown Subject: Red Alert: Contamination Spread Outside of RCAs ... Priority Descriptor: REDUrgent (based on the actual spread of contamination offsite) ...

  11. Energy Department Invests $12 Million to Slash Red Tape and Speed...

    Energy Savers [EERE]

    once again by 2020, the Energy Department today announced eight teams to spur solar power deployment by cutting red tape for residential and small commercial rooftop solar systems. ...

  12. Characterization of trace elements and radionuclides and their risk assessment in red mud

    SciTech Connect (OSTI)

    Akinci, Akin; Artir, Recep

    2008-04-15

    Red mud is a waste and tail material from primary aluminum production, and is named for its color, coming from its iron oxide content. The quantity of red mud is almost equal to the primary aluminum production and leads to a considerable environmental issue. Red mud of the ETI Seydisehir Aluminum Plant is considered as detrimental waste for storage due to its content of various metal oxides, elements and caustics. This detrimental effect is classified into two groups: first, environmental health and second, the cost of storage. In order to minimize the negative effect of red mud, there have been or are presently many investigations carried out on usage of red mud in building materials. However, no effective way of utilizing red mud has yet been found. In this study domestic red mud was investigated and chemical analyses were performed by EDAX and XRF techniques. Radioactivity of the samples was also measured with gamma spectroscopy. The concentrations of elemental Na, Al, Si, Ca, Ti, Fe, S and K were determined by EDAX and XRF. In addition, Cr, Zr, Sr, Ni and Y were also identified as impurities. According to gamma spectroscopy results radium, uranium, thorium and potassium were determined as radioactive elements. It was observed that the amounts of the radioactive elements present in the red mud are within safe limits. Therefore, if domestic red mud originated from Seydisehir could be utilized as reinforcement material in composites, and in building materials, it can be considered safe in terms of environmental and human health.

  13. Retrofitting and the mu Problem

    SciTech Connect (OSTI)

    Green, Daniel; Weigand, Timo; /SLAC /Stanford U., Phys. Dept.

    2010-08-26

    One of the challenges of supersymmetry (SUSY) breaking and mediation is generating a {mu} term consistent with the requirements of electro-weak symmetry breaking. The most common approach to the problem is to generate the {mu} term through a SUSY breaking F-term. Often these models produce unacceptably large B{mu} terms as a result. We will present an alternate approach, where the {mu} term is generated directly by non-perturtative effects. The same non-perturbative effect will also retrofit the model of SUSY breaking in such a way that {mu} is at the same scale as masses of the Standard Model superpartners. Because the {mu} term is not directly generated by SUSY breaking effects, there is no associated B{mu} problem. These results are demonstrated in a toy model where a stringy instanton generates {mu}.

  14. Microsoft Word - Pu Disposition Red Team Report.docx

    National Nuclear Security Administration (NNSA)

    Final Report of the Plutonium Disposition Red Team Date: 13 August 2015 Oak Ridge, Tennessee Thom Mason, Chair This r eport w as p repared a s a n a ccount o f w ork s ponsored b y a n a gency o f t he U nited S tates Government. N either t he U nited S tates G overnment n or any a gency t hereof, n or a ny o f t heir employees, m akes a ny w arranty, e xpress o r i mplied, o r a ssumes a ny l egal l iability o r responsibility f or t he a ccuracy, c ompleteness, o r u sefulness o f a ny i

  15. MAGNESIUM ISOTOPE RATIOS IN {omega} CENTAURI RED GIANTS

    SciTech Connect (OSTI)

    Da Costa, G. S.; Norris, John E.; Yong, David

    2013-05-20

    We have used the high-resolution observations obtained at the Anglo-Australian Telescope with Ultra-High Resolution Facility (R {approx} 100,000) and at Gemini-S with b-HROS (R {approx} 150,000) to determine magnesium isotope ratios for seven {omega} Cen red giants that cover a range in iron abundance from [Fe/H] = -1.78 to -0.78 dex, and for two red giants in M4 (NGC 6121). The {omega} Cen stars sample both the ''primordial'' (i.e., O-rich, Na- and Al-poor) and the ''extreme'' (O-depleted, Na- and Al-rich) populations in the cluster. The primordial population stars in both {omega} Cen and M4 show ({sup 25}Mg, {sup 26}Mg)/{sup 24}Mg isotopic ratios that are consistent with those found for the primordial population in other globular clusters with similar [Fe/H] values. The isotopic ratios for the {omega} Cen extreme stars are also consistent with those for extreme population stars in other clusters. The results for the extreme population stars studied indicate that the {sup 26}Mg/{sup 24}Mg ratio is highest at intermediate metallicities ([Fe/H] < -1.4 dex), and for the highest [Al/Fe] values. Further, the relative abundance of {sup 26}Mg in the extreme population stars is notably higher than that of {sup 25}Mg, in contrast to model predictions. The {sup 25}Mg/{sup 24}Mg isotopic ratio in fact does not show any obvious dependence on either [Fe/H] or [Al/Fe] nor, intriguingly, any obvious difference between the primordial and extreme population stars.

  16. Red-emitting manganese-doped aluminum nitride phosphor

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Cherepy, Nerine J.; Payne, Stephen A.; Harvey, Nicholas M.; Aberg, Daniel; Seeley, Zachary M.; Holliday, Kiel S.; Tran, Ich C.; Zhou, Fei; Martinez, H. Paul; Demeyer, Jessica M.; et al

    2016-02-10

    Here, we report high efficiency luminescence with a manganese-doped aluminum nitride red-emitting phosphor under 254 nm excitation, as well as its excellent lumen maintenance in fluorescent lamp conditions, making it a candidate replacement for the widely deployed europium-doped yttria red phosphor. Solid-state reaction of aluminum nitride powders with manganese metal at 1900 °C, 10 atm N2 in a reducing environment results in nitrogen deficiency, as revealed diffuse reflectance spectra. When these powders are subsequently annealed in flowing nitrogen at 1650 °C, higher nitrogen content is recovered, resulting in white powders. Silicon was added to samples as an oxygen getter tomore » improve emission efficiency. NEXAFS spectra and DFT calculations indicate that the Mn dopant is divalent. From DFT calculations, the UV absorption band is proposed to be due to an aluminum vacancy coupled with oxygen impurity dopants, and Mn2+ is assumed to be closely associated with this site. In contrast with some previous reports, we find that the highest quantum efficiency with 254 nm excitation (Q.E. = 0.86 ± 0.14) is obtained in aluminum nitride with a low manganese doping level of 0.06 mol.%. The principal Mn2+ decay of 1.25 ms is assigned to non-interacting Mn sites, while additional components in the microsecond range appear with higher Mn doping, consistent with Mn clustering and resultant exchange coupling. Slower components are present in samples with low Mn doping, as well as strong afterglow, assigned to trapping on shallow traps followed by detrapping and subsequent trapping on Mn.« less

  17. Kit for the selective labeling of red blood cells in whole blood with [sup 99]Tc

    DOE Patents [OSTI]

    Srivastava, S.C.; Babich, J.W.; Straub, R.; Richards, P.

    1992-05-26

    Disclosed herein are a method and kit for the preparation of [sup 99m]Tc labeled red blood cells using whole blood in a closed sterile system containing stannous tin in a form such that it will enter the red blood cells and be available therein for reduction of technetium. No Drawings

  18. Kit for the selective labeling of red blood cells in whole blood with .sup.9 TC

    DOE Patents [OSTI]

    Srivastava, Suresh C.; Babich, John W.; Straub, Rita; Richards, Powell

    1992-01-01

    Disclosed herein are a method and kit for the preparation of .sup.99m Tc labeled red blood cells using whole blood in a closed sterile system containing stannous tin in a form such that it will enter the red blood cells and be available therein for reduction of technetium.

  19. Solving the Dark Matter Problem

    ScienceCinema (OSTI)

    Baltz, Ted

    2009-09-01

    Cosmological observations have firmly established that the majority of matter in the universe is of an unknown type, called 'dark matter'. A compelling hypothesis is that the dark matter consists of weakly interacting massive particles (WIMPs) in the mass range around 100 GeV. If the WIMP hypothesis is correct, such particles could be created and studied at accelerators. Furthermore they could be directly detected as the primary component of our galaxy. Solving the dark matter problem requires that the connection be made between the two. We describe some theoretical and experimental avenues that might lead to this connection.

  20. AmeriFlux US-Wi7 Red pine clearcut (RPCC)

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Chen, Jiquan [Michigan State University

    2016-01-01

    This is the AmeriFlux version of the carbon flux data for the site US-Wi7 Red pine clearcut (RPCC). Site Description - The Wisconsin Clearcut Red Pine site is located in the Washburn Ranger District of the northeastern section of Chequamegon National Forest. A member of the northern coniferous-deciduous biome, surveys from the mid-19th century indicate the region consisted of a mixed stand of red, white, and jack pines. After extensive timber harvesting, wildfires, and farming activity, the region turned into a fragmented mosaic of stands of various ages and composition. The red pine clearcut site is one of ten sites that collectively represent the successional stages of development in the predominant stand types of a physically homogeneous landscape. Thinned every 7 years until they reach 100 to 150 years of age, the red pine plantations or all ages occupy approximately 25% of the region.

  1. AmeriFlux US-Wi2 Intermediate red pine (IRP)

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Chen, Jiquan [Michigan State University

    2016-01-01

    This is the AmeriFlux version of the carbon flux data for the site US-Wi2 Intermediate red pine (IRP). Site Description - The Wisconsin Intermediate Red Pine site is located in the Washburn Ranger District of the northeastern section of Chequamegon National Forest. A member of the northern coniferous-deciduous biome, surveys from the mid-19th century indicate the region consisted of a mixed stand of red, white, and jack pines. After extensive timber harvesting, wildfires, and farming activity, the region turned into a fragmented mosaic of stands of various ages and composition. The intermediate red pine site is one of ten sites that collectively represent the successional stages of development in the predominant stand types of a physically homogeneous landscape. Thinned every 7 years until they reach 100 to 150 years of age, the red pine plantations of all ages occupy approximately 25% of the region.

  2. Common Air Conditioner Problems | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Common Air Conditioner Problems Common Air Conditioner Problems A refrigerant leak is one common air conditioning problem. | Photo courtesy of ©iStockphoto/BanksPhotos. A refrigerant leak is one common air conditioning problem. | Photo courtesy of ©iStockphoto/BanksPhotos. One of the most common air conditioning problems is improper operation. If your air conditioner is on, be sure to close your home's windows and outside doors. For room air conditioners, isolate the room or a group of

  3. Quantum simulations of physics problems

    SciTech Connect (OSTI)

    Somma, R. D.; Ortiz, G.; Knill, E. H.; Gubernatis, J. E.

    2003-01-01

    If a large Quantum Computer (QC) existed today, what type of physical problems could we efficiently simulate on it that we could not efficiently simulate on a classical Turing machine? In this paper we argue that a QC could solve some relevant physical 'questions' more efficiently. The existence of one-to-one mappings between different algebras of observables or between different Hilbert spaces allow us to represent and imitate any physical system by any other one (e.g., a bosonic system by a spin-1/2 system). We explain how these mappings can be performed, and we show quantum networks useful for the efficient evaluation of some physical properties, such as correlation functions and energy spectra.

  4. Inconsistent Investment and Consumption Problems

    SciTech Connect (OSTI)

    Kronborg, Morten Tolver; Steffensen, Mogens

    2015-06-15

    In a traditional Black–Scholes market we develop a verification theorem for a general class of investment and consumption problems where the standard dynamic programming principle does not hold. The theorem is an extension of the standard Hamilton–Jacobi–Bellman equation in the form of a system of non-linear differential equations. We derive the optimal investment and consumption strategy for a mean-variance investor without pre-commitment endowed with labor income. In the case of constant risk aversion it turns out that the optimal amount of money to invest in stocks is independent of wealth. The optimal consumption strategy is given as a deterministic bang-bang strategy. In order to have a more realistic model we allow the risk aversion to be time and state dependent. Of special interest is the case were the risk aversion is inversely proportional to present wealth plus the financial value of future labor income net of consumption. Using the verification theorem we give a detailed analysis of this problem. It turns out that the optimal amount of money to invest in stocks is given by a linear function of wealth plus the financial value of future labor income net of consumption. The optimal consumption strategy is again given as a deterministic bang-bang strategy. We also calculate, for a general time and state dependent risk aversion function, the optimal investment and consumption strategy for a mean-standard deviation investor without pre-commitment. In that case, it turns out that it is optimal to take no risk at all.

  5. ARM: Shortwave Array Spectroradiometer-Hemispheric, Near-InfraRed channel, low-sun angles [a0 data is uncalibrated

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Albert Mendoza; Yan Shi; Connor Flynn

    1990-01-01

    Shortwave Array Spectroradiometer-Hemispheric, Near-InfraRed channel, low-sun angles [a0 data is uncalibrated

  6. ARM: Shortwave Array Spectroradiometer-Hemispheric, Near-InfraRed channel, high-sun angles [a0 data is uncalibrated

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Albert Mendoza; Yan Shi; Connor Flynn

    2011-03-22

    Shortwave Array Spectroradiometer-Hemispheric, Near-InfraRed channel, high-sun angles [a0 data is uncalibrated

  7. ARM: Shortwave Array Spectroradiometer-Hemispheric, Near-InfraRed channel, high-sun angles [a0 data is uncalibrated

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Albert Mendoza; Yan Shi; Connor Flynn

    Shortwave Array Spectroradiometer-Hemispheric, Near-InfraRed channel, high-sun angles [a0 data is uncalibrated

  8. ARM: Shortwave Array Spectroradiometer-Hemispheric, Near-InfraRed channel, low-sun angles [a0 data is uncalibrated

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Albert Mendoza; Yan Shi; Connor Flynn

    Shortwave Array Spectroradiometer-Hemispheric, Near-InfraRed channel, low-sun angles [a0 data is uncalibrated

  9. DRAMATIC CHANGE IN JUPITER'S GREAT RED SPOT FROM SPACECRAFT OBSERVATIONS

    SciTech Connect (OSTI)

    Simon, Amy A.; Wong, Michael H.; De Pater, Imke; Rogers, John H.; Orton, Glenn S.; Carlson, Robert W.; Asay-Davis, Xylar; Marcus, Philip S.

    2014-12-20

    Jupiter's Great Red Spot (GRS) is one of its most distinct and enduring features. Since the advent of modern telescopes, keen observers have noted its appearance and documented a change in shape from very oblong to oval, confirmed in measurements from spacecraft data. It currently spans the smallest latitude and longitude size ever recorded. Here we show that this change has been accompanied by an increase in cloud/haze reflectance as sensed in methane gas absorption bands, increased absorption at wavelengths shorter than 500nm, and increased spectral slope between 500 and 630nm. These changes occurred between 2012 and 2014, without a significant change in internal tangential wind speeds; the decreased size results in a 3.2day horizontal cloud circulation period, shorter than previously observed. As the GRS has narrowed in latitude, it interacts less with the jets flanking its north and south edges, perhaps allowing for less cloud mixing and longer UV irradiation of cloud and aerosol particles. Given its long life and observational record, we expect that future modeling of the GRS's changes, in concert with laboratory flow experiments, will drive our understanding of vortex evolution and stability in a confined flow field crucial for comparison with other planetary atmospheres.

  10. RED CLUMP STARS IN THE SAGITTARIUS TIDAL STREAMS

    SciTech Connect (OSTI)

    Carrell, Kenneth; Chen Yuqin; Wilhelm, Ronald

    2012-07-15

    We have probed a section (l {approx} 150, b {approx} -60) of the trailing tidal arm of the Sagittarius dwarf spheroidal galaxy by identifying a sample of Red Clump (RC) stream stars. RC stars are not generally found in the halo field, but are found in significant numbers in both the Sagittarius galaxy and its tidal streams, making them excellent probes of stream characteristics. Our target sample was selected using photometric data from the Sloan Digital Sky Survey, Data Release 6, which was constrained in color to match the Sagittarius RC stars. Spectroscopic observations of the target stars were conducted at Kitt Peak National Observatory using the WIYN telescope. The resulting spectroscopic sample is magnitude limited and contains both main-sequence disk stars and evolved RC stars. We have developed a method to systematically separate these two stellar classes using kinematic information and a Bayesian approach for surface gravity determination. The resulting RC sample allows us to determine an absolute stellar density of {rho} = 2.7 {+-} 0.5 RC stars kpc{sup -3} at this location in the stream. Future measurements of stellar densities for a variety of populations and at various locations along the streams will lead to a much improved understanding of the original nature of the Sagittarius galaxy and the physical processes controlling its disruption and subsequent stream generation.

  11. DISCOVERY OF SUPER-Li-RICH RED GIANTS IN DWARF SPHEROIDAL GALAXIES

    SciTech Connect (OSTI)

    Kirby, Evan N.; Fu, Xiaoting; Deng, Licai; Guhathakurta, Puragra

    2012-06-10

    Stars destroy lithium (Li) in their normal evolution. The convective envelopes of evolved red giants reach temperatures of millions of kelvin, hot enough for the {sup 7}Li(p, {alpha}){sup 4}He reaction to burn Li efficiently. Only about 1% of first-ascent red giants more luminous than the luminosity function bump in the red giant branch exhibit A(Li) > 1.5. Nonetheless, Li-rich red giants do exist. We present 15 Li-rich red giants-14 of which are new discoveries-among a sample of 2054 red giants in Milky Way dwarf satellite galaxies. Our sample more than doubles the number of low-mass, metal-poor ([Fe/H] {approx}< -0.7) Li-rich red giants, and it includes the most-metal-poor Li-enhanced star known ([Fe/H] = -2.82, A(Li){sub NLTE} = 3.15). Because most of the stars have Li abundances larger than the universe's primordial value, the Li in these stars must have been created rather than saved from destruction. These Li-rich stars appear like other stars in the same galaxies in every measurable regard other than Li abundance. We consider the possibility that Li enrichment is a universal phase of evolution that affects all stars, and it seems rare only because it is brief.

  12. Characterization of red mud-epoxy intumescent char using surface imaging and micro analysis

    SciTech Connect (OSTI)

    Arogundade, A. I. Megat-Yusoff, P. S. M. Faiz, A.; Bhat, A. H.

    2015-07-22

    In this study, red mud (RM), an oxide waste was proposed as reinforcing, synergistic filler for the traditional epoxy intumescent coating (IC). 5.5 wt% of acid-modified and unmodified red mud were introduced into the basic intumescent formulation of ammonium polyphosphate (APP), pentaerythritol (PER) and melamine (MEL). In order to predict effect of modification on its suitability, Field emission electron scanning microscopy and Fourier transform infra red were used to obtain detailed characteristics such as the cell size, pore distribution, homogeneity and chemical composition of the red mud-epoxy carbonaceous char. Both acid-modified and unmodified RM-filled ICs produced chars with smaller and more closely packed cells compared to chars from the unfilled coating. Both coating types had hard carbonaceous metal phosphate coverings that could act as heat barriers. The unmodified red mud was found to be antagonistic to the intumescent action with an expansion of only 2 times the initial thickness. The leached, low iron-red mud produced an expansion of 15 times the initial thickness, but possessed a hollow interior. From these findings, it may be deduced that while acid leaching of red mud may improve intumescent expansion, it would be necessary to optimize the percent filler loading to improve residual mass.

  13. Microsoft Word - RedSeal_Smart Grid Policy Logistics RFI-sd.docx

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    on Smart Grid RFI RedSeal Systems, Inc. 1 October 29, 2010 Office of Electricity Delivery and Energy Reliability US Department of Energy Room 8H033 1000 Independence Avenue, SW Washington, DC 20585 Re: Comments on "Smart Grid RFI: Addressing Policy and Logistical Challenges" 75 FR 57006 [FR Doc. 2010-23251] From: Steve Dauber Vice-President, Marketing RedSeal Systems 2121 South El Camino Real, Suite 300 San Mateo, CA 94403 Ph: 650-645-6209 sdauber@redseal.net www.redseal.net RedSeal

  14. Method for extending the useful shelf-life of refrigerated red blood cells by flushing with inert gas

    DOE Patents [OSTI]

    Bitensky, M.W.; Yoshida, Tatsuro

    1997-04-29

    A method is disclosed using oxygen removal for extending the useful shelf-life of refrigerated red blood cells. A cost-effective, 4 C storage procedure that preserves red cell quality and prolongs post-transfusion in vivo survival is described. Preservation of adenosine triphosphate levels and reduction in hemolysis and in membrane vesicle production of red blood cells stored at 4 C for prolonged periods of time is achieved by removing oxygen from the red blood cells at the time of storage; in particular, by flushing with an inert gas. Adenosine triphosphate levels of the stored red blood cells are boosted in some samples by addition of ammonium phosphate. 4 figs.

  15. Hydrocarbon Liquid Production via Catalytic Hydroprocessing of Phenolic Oils Fractionated from Fast Pyrolysis of Red Oak and Corn Stover

    SciTech Connect (OSTI)

    Elliott, Douglas C.; Wang, Huamin; Rover, Majorie; Whitmer, Lysle; Smith, Ryan; Brown, Robert C.

    2015-04-13

    Phenolic oils were produced from fast pyrolysis of two different biomass feedstocks, red oak and corn stover and evaluated in hydroprocessing tests for production of liquid hydrocarbon products. The phenolic oils were produced with a bio-oil fractionating process in combination with a simple water wash of the heavy ends from the fractionating process. Phenolic oils derived from the pyrolysis of red oak and corn stover were recovered with yields (wet biomass basis) of 28.7 wt% and 14.9 wt%, respectively, and 54.3% and 58.6% on a carbon basis. Both precious metal catalysts and sulfided base metal catalyst were evaluated for hydrotreating the phenolic oils, as an extrapolation from whole bio-oil hydrotreatment. They were effective in removing heteroatoms with carbon yields as high as 81% (unadjusted for the 90% carbon balance). There was nearly complete heteroatom removal with residual O of only 0.4% to 5%, while N and S were reduced to less than 0.05%. Use of the precious metal catalysts resulted in more saturated products less completely hydrotreated compared to the sulfided base metal catalyst, which was operated at higher temperature. The liquid product was 42-52% gasoline range molecules and about 43% diesel range molecules. Particulate matter in the phenolic oils complicated operation of the reactors, causing plugging in the fixed-beds especially for the corn stover phenolic oil. This difficulty contrasts with the catalyst bed fouling and plugging, which is typically seen with hydrotreatment of whole bio-oil. This problem was substantially alleviated by filtering the phenolic oils before hydrotreating. More thorough washing of the phenolic oils during their preparation from the heavy ends of bio-oil or on-line filtration of pyrolysis vapors to remove particulate matter before condensation of the bio-oil fractions is recommended.

  16. Hydrocarbon Liquid Production via Catalytic Hydroprocessing of Phenolic Oils Fractionated from Fast Pyrolysis of Red Oak and Corn Stover

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Elliott, Douglas C.; Wang, Huamin; Rover, Majorie; Whitmer, Lysle; Smith, Ryan; Brown, Robert C.

    2015-04-13

    Phenolic oils were produced from fast pyrolysis of two different biomass feedstocks, red oak and corn stover and evaluated in hydroprocessing tests for production of liquid hydrocarbon products. The phenolic oils were produced with a bio-oil fractionating process in combination with a simple water wash of the heavy ends from the fractionating process. Phenolic oils derived from the pyrolysis of red oak and corn stover were recovered with yields (wet biomass basis) of 28.7 wt% and 14.9 wt%, respectively, and 54.3% and 58.6% on a carbon basis. Both precious metal catalysts and sulfided base metal catalyst were evaluated for hydrotreatingmore » the phenolic oils, as an extrapolation from whole bio-oil hydrotreatment. They were effective in removing heteroatoms with carbon yields as high as 81% (unadjusted for the 90% carbon balance). There was nearly complete heteroatom removal with residual O of only 0.4% to 5%, while N and S were reduced to less than 0.05%. Use of the precious metal catalysts resulted in more saturated products less completely hydrotreated compared to the sulfided base metal catalyst, which was operated at higher temperature. The liquid product was 42-52% gasoline range molecules and about 43% diesel range molecules. Particulate matter in the phenolic oils complicated operation of the reactors, causing plugging in the fixed-beds especially for the corn stover phenolic oil. This difficulty contrasts with the catalyst bed fouling and plugging, which is typically seen with hydrotreatment of whole bio-oil. This problem was substantially alleviated by filtering the phenolic oils before hydrotreating. More thorough washing of the phenolic oils during their preparation from the heavy ends of bio-oil or on-line filtration of pyrolysis vapors to remove particulate matter before condensation of the bio-oil fractions is recommended.« less

  17. Reservoir characterization of the Ordovician Red River Formation in southwest Williston Basin Bowman County, ND and Harding County, SD

    SciTech Connect (OSTI)

    Sippel, M.A.; Luff, K.D.; Hendricks, M.L.; Eby, D.E.

    1998-07-01

    This topical report is a compilation of characterizations by different disciplines of the Red River Formation in the southwest portion of the Williston Basin and the oil reservoirs which it contains in an area which straddles the state line between North Dakota and South Dakota. Goals of the report are to increase understanding of the reservoir rocks, oil-in-place, heterogeneity, and methods for improved recovery. The report is divided by discipline into five major sections: (1) geology, (2) petrography-petrophysical, (3) engineering, (4) case studies and (5) geophysical. Interwoven in these sections are results from demonstration wells which were drilled or selected for special testing to evaluate important concepts for field development and enhanced recovery. The Red River study area has been successfully explored with two-dimensional (2D) seismic. Improved reservoir characterization utilizing 3-dimensional (3D) and has been investigated for identification of structural and stratigraphic reservoir compartments. These seismic characterization tools are integrated with geological and engineering studies. Targeted drilling from predictions using 3D seismic for porosity development were successful in developing significant reserves at close distances to old wells. Short-lateral and horizontal drilling technologies were tested for improved completion efficiency. Lateral completions should improve economics for both primary and secondary recovery where low permeability is a problem and higher density drilling is limited by drilling cost. Low water injectivity and widely spaced wells have restricted the application of waterflooding in the past. Water injection tests were performed in both a vertical and a horizontal well. Data from these tests were used to predict long-term injection and oil recovery.

  18. Availability and abundance of prey for the red-cockaded woodpecker.

    SciTech Connect (OSTI)

    Hanula, James, L.; Horn, Scott.

    2004-12-31

    Red-cockaded woodpecker; Road to Recovery. Proceedings of the 4th Red-cockaded woodpecker Symposium. Ralph Costa and Susan J. Daniels, eds. Savannah, Georgia. January, 2003. Chapter 11. Prey, Fire, and Community Ecology. Pp 633-645. Abstract: Over a 10-year period we investigated red-cockaded woodpecker (Picoides borealis) prey use, sources of prey, prey distribution within trees and stands, and how forest management decisions affect prey abundance in South Carolina, Alabama, Georgia and Florida. Cameras were operated at 31 nest cavities to record nest visits with prey in 4 locations that ranged in foraging habitat from pine stands established in old fields to an old-growth stand in South Georgia. Examination of nearly 12,000 photographs recorded over 5 years revealed that, although red-cockaded woodpeckers used over 40 arthropods for food, the majority of the nestling diet is comprised of a relatively small number of common arthropods.

  19. The Red Storm Architecture and Early Experiences With Multi-Core...

    Office of Scientific and Technical Information (OSTI)

    With Multi-Core Processors Citation Details In-Document Search Title: The Red Storm Architecture and Early Experiences With Multi-Core Processors Authors: Tomkins, James L 1 ; ...

  20. Color stable white phosphorescent organic light emitting diodes with red emissive electron transport layer

    SciTech Connect (OSTI)

    Wook Kim, Jin; Yoo, Seung Il; Sung Kang, Jin; Eun Lee, Song; Kwan Kim, Young; Hwa Yu, Hyeong; Turak, Ayse; Young Kim, Woo

    2015-06-28

    We analyzed the performance of multi-emissive white phosphorescent organic light-emitting diodes (PHOLEDs) in relation to various red emitting sites of hole and electron transport layers (HTL and ETL). The shift of the recombination zone producing stable white emission in PHOLEDs was utilized as luminance was increased with red emission in its electron transport layer. Multi-emissive white PHOLEDs including the red light emitting electron transport layer yielded maximum external quantum efficiency of 17.4% with CIE color coordinates (−0.030, +0.001) shifting only from 1000 to 10 000 cd/m{sup 2}. Additionally, we observed a reduction of energy loss in the white PHOLED via Ir(piq){sub 3} as phosphorescent red dopant in electron transport layer.

  1. AmeriFlux US-Wi0 Young red pine (YRP)

    SciTech Connect (OSTI)

    Chen, Jiquan

    2016-01-01

    This is the AmeriFlux version of the carbon flux data for the site US-Wi0 Young red pine (YRP). Site Description - The Wisconsin Young Red Pine site is located in the Washburn Ranger District of the northeastern section of Chequamegon National Forest. A member of the northern coniferous-deciduous biome, surveys from the mid-19th century indicate the region consisted of a mixed stand of red, white, and jack pines. After extensive timber harvesting, wildfires, and farming activity, the region turned into a fragmented mosaic of stands of various ages and composition. As an assemblage, the ten Wisconsin sites are indicative of the successional stages of development in the predominant stand types of a physically homogeneous landscape. Thinned every 7 years until they reach 100 to 150 years of age, the red pine plantations of all ages occupy approximately 25% of the region.

  2. AmeriFlux US-Wi4 Mature red pine (MRP)

    SciTech Connect (OSTI)

    Chen, Jiquan

    2016-01-01

    This is the AmeriFlux version of the carbon flux data for the site US-Wi4 Mature red pine (MRP). Site Description - The Wisconsin Mature Red Pine site is located in the Washburn Ranger District of the northeastern section of Chequamegon National Forest. A member of the northern coniferous-deciduous biome, surveys from the mid-19th century indicate the region consisted of a mixed stand of red, white, and jack pines. After extensive timber harvesting, wildfires, and farming activity, the region turned into a fragmented mosaic of stands of various ages and composition. As an assemblage, the ten Wisconsin sites are indicative of the successional stages of development in the predominant stand types of a physically homogeneous landscape. Thinned every 7 years until they reach 100 to 150 years of age, the red pine plantations of all ages occupy approximately 25% of the region.

  3. EVOLUTION OF GROUP GALAXIES FROM THE FIRST RED-SEQUENCE CLUSTER SURVEY

    SciTech Connect (OSTI)

    Li, I. H.; Yee, H. K. C.; Hsieh, B. C.; Gladders, M. E-mail: hyee@astro.utoronto.ca E-mail: gladders@oddjob.uchicago.edu

    2012-04-20

    We study the evolution of the red-galaxy fraction (f{sub red}) in 905 galaxy groups with 0.15 {<=} z < 0.52. The galaxy groups are identified by the 'probability friends-of-friends' algorithm from the first Red-Sequence Cluster Survey (RCS1) photometric-redshift sample. There is a high degree of uniformity in the properties of the red sequence of the group galaxies, indicating that the luminous red-sequence galaxies in the groups are already in place by z {approx} 0.5 and that they have a formation epoch of z {approx}> 2. In general, groups at lower redshifts exhibit larger f{sub red} than those at higher redshifts, showing a group Butcher-Oemler effect. We investigate the evolution of f{sub red} by examining its dependence on four parameters, one of which can be classified as intrinsic and three of which can be classified as environmental: galaxy stellar mass (M{sub *}), total group stellar mass (M{sub *,grp}, a proxy for group halo mass), normalized group-centric radius (r{sub grp}), and local galaxy density ({Sigma}{sub 5}). We find that M{sub *} is the dominant parameter such that there is a strong correlation between f{sub red} and galaxy stellar mass. Furthermore, the dependence of f{sub red} on the environmental parameters is also a strong function of M{sub *}. Massive galaxies (M{sub *} {approx}> 10{sup 11} M{sub Sun }) show little dependence of f{sub red} on r{sub grp}, M{sub *,grp}, and {Sigma}{sub 5} over the redshift range. The dependence of f{sub red} on these parameters is primarily seen for galaxies with lower masses, especially for M{sub *} {approx}< 10{sup 10.6} M{sub Sun }. We observe an apparent 'group down-sizing' effect, in that galaxies in lower-mass halos, after controlling for galaxy stellar mass, have lower f{sub red}. We find a dependence of f{sub red} on both r{sub grp} and {Sigma}{sub 5} after the other parameters are controlled. At a fixed r{sub grp}, there is a significant dependence of f{sub red} on {Sigma}{sub 5}, while r{sub grp

  4. Redding Regional High School Science Bowl | U.S. DOE Office of Science (SC)

    Office of Science (SC) Website

    Redding Regional High School Science Bowl National Science Bowl® (NSB) NSB Home About Regional Competitions Rules, Forms, and Resources High School Regionals Middle School Regionals National Finals Volunteers Key Dates Frequently Asked Questions News Media Contact Us WDTS Home Contact Information National Science Bowl® U.S. Department of Energy SC-27/ Forrestal Building 1000 Independence Ave., SW Washington, DC 20585 E: Email Us High School Regionals Redding Regional High School Science Bowl

  5. Redding Regional Middle School Science Bowl | U.S. DOE Office of Science

    Office of Science (SC) Website

    (SC) Redding Regional Middle School Science Bowl National Science Bowl® (NSB) NSB Home About Regional Competitions Rules, Forms, and Resources High School Regionals Middle School Regionals National Finals Volunteers Key Dates Frequently Asked Questions News Media Contact Us WDTS Home Contact Information National Science Bowl® U.S. Department of Energy SC-27/ Forrestal Building 1000 Independence Ave., SW Washington, DC 20585 E: Email Us Middle School Regionals Redding Regional Middle School

  6. EVMS Training Snippet: 5.7 PARSII Analysis: OAPM Red Yellow Report |

    Office of Environmental Management (EM)

    Department of Energy 7 PARSII Analysis: OAPM Red Yellow Report EVMS Training Snippet: 5.7 PARSII Analysis: OAPM Red Yellow Report This EVMS Training Snippet, sponsored by the Office of Project Management (PM) is one in a series regarding PARS II Analysis reports. PARS II offers direct insight into EVM project data from the contractor's internal systems. The reports were developed with the users in mind, organized and presented in an easy to follow manner, with analysis results and key

  7. Red & Black Ball raises nearly $82,000 for youth

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Red & Black Ball raises $81,000 for youth Community Connections: Your link to news and opportunities from Los Alamos National Laboratory Latest Issue: September 1, 2016 all issues All Issues » submit Red & Black Ball raises nearly $82,000 for youth The Family YMCA receives windfall for Española and Los Alamos teen centers. April 4, 2016 From left: LANL Government Affairs Office Director Patrick Woehrle, LANL Community Programs Office Director Kathy Keith, Laboratory Director Charles

  8. Red-Emitting Phosphors for Solid-State Lighting - Energy Innovation Portal

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Industrial Technologies Industrial Technologies Electricity Transmission Electricity Transmission Advanced Materials Advanced Materials Find More Like This Return to Search Red-Emitting Phosphors for Solid-State Lighting Sandia National Laboratories Contact SNL About This Technology Publications: PDF Document Publication Market Sheet (851 KB) Technology Marketing SummarySandia has developed red-emitting phosphors that will help to transform the cold blue of many current light-emitting diodes

  9. SUPERNOVA 2008bk AND ITS RED SUPERGIANT PROGENITOR

    SciTech Connect (OSTI)

    Van Dyk, Schuyler D.; Elias-Rosa, Nancy [Spitzer Science Center/Caltech, Mailcode 220-6, Pasadena, CA 91125 (United States); Davidge, Tim J., E-mail: vandyk@ipac.caltech.edu, E-mail: tim.davidge@nrc.ca [Herzberg Institute of Astrophysics, National Research Council of Canada, Victoria, B.C., V9E 2E7 (Canada); and others

    2012-01-15

    We have obtained limited photometric and spectroscopic data for supernova (SN) 2008bk in NGC 7793, primarily at {approx}> 150 days after explosion. We find that it is a Type II-Plateau (II-P) SN that most closely resembles the low-luminosity SN 1999br in NGC 4900. Given the overall similarity between the observed light curves and colors of SNe 2008bk and 1999br, we infer that the total visual extinction to SN 2008bk (A{sub V} = 0.065 mag) must be almost entirely due to the Galactic foreground, similar to what has been assumed for SN 1999br. We confirm the identification of the putative red supergiant (RSG) progenitor star of the SN in high-quality g'r'i' images we had obtained in 2007 at the Gemini-South 8 m telescope. Little ambiguity exists in this progenitor identification, qualifying it as the best example to date, next to the identification of the star Sk -69 Degree-Sign 202 as the progenitor of SN 1987A. From a combination of photometry of the Gemini images with that of archival, pre-SN, Very Large Telescope JHK{sub s} images, we derive an accurate observed spectral energy distribution (SED) for the progenitor. We find from nebular strong-intensity emission-line indices for several H II regions near the SN that the metallicity in the environment is likely subsolar (Z Almost-Equal-To 0.6 Z{sub Sun }). The observed SED of the star agrees quite well with synthetic SEDs obtained from model RSG atmospheres with effective temperature T{sub eff} = 3600 {+-} 50 K. We find, therefore, that the star had a bolometric luminosity with respect to the Sun of log (L{sub bol}/L{sub Sun} ) = 4.57 {+-} 0.06 and radius R{sub *} = 496 {+-} 34 R{sub Sun} at {approx}6 months prior to explosion. Comparing the progenitor's properties with theoretical massive-star evolutionary models, we conclude that the RSG progenitor had an initial mass in the range of 8-8.5 M{sub Sun }. This mass is consistent with, albeit at the low end of, the inferred range of initial masses for SN II

  10. Student's algorithm solves real-world problem

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Student's algorithm solves real-world problem Supercomputing Challenge: student's algorithm solves real-world problem Students learn how to use powerful computers to analyze, model, and solve real-world problems. April 3, 2012 Jordon Medlock of Albuquerque's Manzano High School won the 2012 Lab-sponsored Supercomputing Challenge Jordon Medlock of Albuquerque's Manzano High School won the 2012 Lab-sponsored Supercomputing Challenge by creating a computer algorithm that automates the process of

  11. design problem | OpenEI Community

    Open Energy Info (EERE)

    design problem Home Dc's picture Submitted by Dc(266) Contributor 15 November, 2013 - 13:26 Living Walls ancient building system architect biomimicry building technology cooling cu...

  12. PCx: Optimization Problem Solver | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    programming problems. Windows 95 version includes a user-friendly graphical interface Java graphical interface is available for all environments Source code is available and...

  13. Statewide Power Problems May Affect SSRL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Statewide Power Problems May Affect SSRL The power crisis affecting California and the northwestern US may have some implication for SSRL users during the current run. As the...

  14. Engineering report standard hydrogen monitoring system problems

    SciTech Connect (OSTI)

    Golberg, R.L.

    1996-09-25

    Engineering Report to document moisture problems found during the sampling of the vapors in the dome space for hydrogen in the storage tanks and a recommended solution.

  15. Approximate resolution of hard numbering problems

    SciTech Connect (OSTI)

    Bailleux, O.; Chabrier, J.J.

    1996-12-31

    We present a new method for estimating the number of solutions of constraint satisfaction problems. We use a stochastic forward checking algorithm for drawing a sample of paths from a search tree. With this sample, we compute two values related to the number of solutions of a CSP instance. First, an unbiased estimate, second, a lower bound with an arbitrary low error probability. We will describe applications to the Boolean Satisfiability problem and the Queens problem. We shall give some experimental results for these problems.

  16. Frequency Instability Problems in North American Interconnections

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Instability Problems in North American Interconnections Prepared by: Energy Sector Planning and Analysis (ESPA) ... would make the situation worse during an emergency event. ...

  17. Anomalously Large Polarization Effect Responsible for Excitonic Red Shifts in PbSe Quantum Dot Solids

    SciTech Connect (OSTI)

    A Wolcott; V Doyeux; C Nelson; R Gearba; K Lei; K Yager; A dolocan; K Williams; D Nguyen; X Zhu

    2011-12-31

    The formation of solid thin films from colloidal semiconductor quantum dots (QDs) is often accompanied by red shifts in excitonic transitions, but the mechanisms responsible for the red shifts are under debate. We quantitatively address this issue using optical absorption spectroscopy of two-dimensional (2D) and three-dimensional (3D) arrays of PbSe QDs with controlled inter-QD distance, which was determined by the length of alkanedithiol linking molecules. With decreasing inter-QD distance, the first and second exciton absorption peaks show increasing red shifts. Using thin films consisting of large and isolated QDs embedded in a matrix of small QDs, we determine that a dominant contribution to the observed red shift is due to changes in polarization of the dielectric environment surrounding each QD ({approx}88%), while electronic or transition dipole coupling plays a lesser role. However, the observed red shifts are more than 1 order of magnitude larger than theoretical predictions based on the dielectric polarization effect for spherical QDs. We attribute this anomalously large polarization effect to deviations of the exciton wave functions from eigenfunctions of the idealized spherical quantum well model.

  18. THE SIZE DIFFERENCE BETWEEN RED AND BLUE GLOBULAR CLUSTERS IS NOT DUE TO PROJECTION EFFECTS

    SciTech Connect (OSTI)

    Webb, Jeremy J.; Harris, William E.; Sills, Alison

    2012-11-10

    Metal-rich (red) globular clusters in massive galaxies are, on average, smaller than metal-poor (blue) globular clusters. One of the possible explanations for this phenomenon is that the two populations of clusters have different spatial distributions. We test this idea by comparing clusters observed in unusually deep, high signal-to-noise images of M87 with a simulated globular cluster population in which the red and blue clusters have different spatial distributions, matching the observations. We compare the overall distribution of cluster effective radii as well as the relationship between effective radius and galactocentric distance for both the observed and simulated red and blue sub-populations. We find that the different spatial distributions does not produce a significant size difference between the red and blue sub-populations as a whole or at a given galactocentric distance. These results suggest that the size difference between red and blue globular clusters is likely due to differences during formation or later evolution.

  19. Enhanced visible light photocatalytic property of red phosphorus via surface roughening

    SciTech Connect (OSTI)

    Li, Weibing; Yue, Jiguang; Hua, Fangxia; Feng, Chang; Bu, Yuyu; Chen, Zhuoyuan

    2015-10-15

    Highlights: • Photocatalytic RhB degradation of red phosphorus was studied for the first time. • Surface rough can increase the photocatalysis reaction active sites. • Surface rough red phosphorus possesses high photocatalytic performance. • Surface rough red phosphorus has high industrial application value. - Abstract: Red phosphorus with rough surface (SRP) was prepared by catalyst-assisted hydrothermal synthesis using Co{sup 2+} catalyst. The photocatalytic Rhodamine B (RhB) degradation of red phosphorus (RP) and SRP was studied for the first time in this work. Rough surface can enhance the dye adsorption ability of RP. About 75% RhB was absorbed by SRP after 30-min adsorption in 100 ml RhB solution with concentration of 10 mg l{sup −1} in dark. After only 10 min of illumination by visible light, more than 95% RhB was degraded, indicating that SRP has a great application potential in the area of photocatalysis. The photocatalytic RhB degradation properties of RP are much weaker than those of SRP. The increase of the number of the active sites for the photocatalytic reactions, the electron mobility and the lifetime of the photogenerated electrons cause the significant improvement of the photocatalytic performance of SRP based on the experimental results obtained.

  20. Tracing recent star formation of red early-type galaxies out to z ∼ 1

    SciTech Connect (OSTI)

    Ko, Jongwan; Lee, Jong Chul; Hwang, Ho Seong; Im, Myungshin; Le Borgne, Damien; Elbaz, David

    2014-08-20

    We study the mid-infrared (IR) excess emission of early-type galaxies (ETGs) on the red sequence at z < 1 using a spectroscopic sample of galaxies in the fields of Great Observatories Origins Deep Survey (GOODS). In the mass-limited sample of 1025 galaxies with M {sub star} > 10{sup 10.5} M {sub ☉} and 0.4 < z < 1.05, we identify 696 Spitzer 24 μm detected (above the 5σ) galaxies and find them to have a wide range of NUV-r and r-[12 μm] colors despite their red optical u – r colors. Even in the sample of very massive ETGs on the red sequence with M {sub star} > 10{sup 11.2} M {sub ☉}, more than 18% show excess emission over the photospheric emission in the mid-IR. The combination with the results of red ETGs in the local universe suggests that the recent star formation is not rare among quiescent, red ETGs at least out to z ∼ 1 if the mid-IR excess emission results from intermediate-age stars or/and from low-level ongoing star formation. Our color-color diagram including near-UV and mid-IR emissions are efficient not only for identifying ETGs with recent star formation, but also for distinguishing quiescent galaxies from dusty star-forming galaxies.

  1. Integrated network design and scheduling problems :

    SciTech Connect (OSTI)

    Nurre, Sarah G.; Carlson, Jeffrey J.

    2014-01-01

    We consider the class of integrated network design and scheduling problems. These problems focus on selecting and scheduling operations that will change the characteristics of a network, while being speci cally concerned with the performance of the network over time. Motivating applications of INDS problems include infrastructure restoration after extreme events and building humanitarian distribution supply chains. While similar models have been proposed, no one has performed an extensive review of INDS problems from their complexity, network and scheduling characteristics, information, and solution methods. We examine INDS problems under a parallel identical machine scheduling environment where the performance of the network is evaluated by solving classic network optimization problems. We classify that all considered INDS problems as NP-Hard and propose a novel heuristic dispatching rule algorithm that selects and schedules sets of arcs based on their interactions in the network. We present computational analysis based on realistic data sets representing the infrastructures of coastal New Hanover County, North Carolina, lower Manhattan, New York, and a realistic arti cial community CLARC County. These tests demonstrate the importance of a dispatching rule to arrive at near-optimal solutions during real-time decision making activities. We extend INDS problems to incorporate release dates which represent the earliest an operation can be performed and exible release dates through the introduction of specialized machine(s) that can perform work to move the release date earlier in time. An online optimization setting is explored where the release date of a component is not known.

  2. AMRH and High Energy Reinicke Problem

    SciTech Connect (OSTI)

    Shestakov, A I; Greenough, J A

    2001-05-14

    The authors describe AMRH results on a version of the Reinicke problem specified by the V and V group of LLNL's A-Div. The simulation models a point explosion with heat conduction. The problem specification requires that the heat conduction be replaced with diffusive radiation transport. The matter and radiation energy densities are tightly coupled.

  3. Red Lake Band of Chippewa Indians - First Steps Toward an Energy Efficient Future and MAP Biomass Project

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    OVERVIEW To develop the capacity to conduct energy audits Implement energy efficiency measures into Tribal homes Develop a Tribally administered Energy Efficiency Program and business PROJECT PARTICIPANTS Red Lake Housing Employees Energy Cents Coalition Staff Red Lake Band Members RELEVANT BACKGROUND INFORMATION The Red Lake Band of Chippewa Indians recognizes the need to develop a more sustainable, affordable and autonomous energy future for Tribal members Nearly 60% of the 1,621 housing units

  4. U-230: Sudo on Red Hat Enterprise Linux %postun Symlink Flaw Lets Local Users Gain Elevated Privileges

    Office of Energy Efficiency and Renewable Energy (EERE)

    An updated sudo package that fixes one security issue and several bugs is now available for Red Hat Enterprise Linux 5.

  5. U-217: Red Hat Certificate System Bugs Let Remote Users Conduct Cross-Site Scripting and Denial of Service Attacks

    Office of Energy Efficiency and Renewable Energy (EERE)

    Two vulnerabilities were reported in Red Hat Certificate System. A remote user can conduct cross-site scripting attacks. A remote authenticated user can revoke the CA certificate.

  6. Method for extending the useful shelf-life of refrigerated red blood cells by flushing with inert gas

    DOE Patents [OSTI]

    Bitensky, Mark W.; Yoshida, Tatsuro

    1997-01-01

    Method using oxygen removal for extending the useful shelf-life of refrigerated red blood cells. A cost-effective, 4.degree. C. storage procedure that preserves red cell quality and prolongs post-transfusion in vivo survival is described. Preservation of adenosine triphosphate levels and reduction in hemolysis and in membrane vesicle production of red blood cells stored at 4.degree. C. for prolonged periods of time is achieved by removing oxygen therefrom at the time of storage; in particular, by flushing with an inert gas. Adenosine triphosphate levels of the stored red blood cells are boosted in some samples by addition of ammonium phosphate.

  7. Prolonged cold storage of red blood cells by oxygen removal and additive usage

    DOE Patents [OSTI]

    Bitensky, M.W.; Yoshida, Tatsuro

    1998-08-04

    Prolonged cold storage of red blood cells by oxygen removal and additive usage. A cost-effective, 4 C storage procedure that preserves red cell quality and prolongs post-transfusion in vivo survival is described. The improved in vivo survival and the preservation of adenosine triphosphate levels, along with reduction in hemolysis and membrane vesicle production of red blood cells stored at 4 C for prolonged periods of time, is achieved by reducing the oxygen level therein at the time of storage; in particular, by flushing the cells with an inert gas, and storing them in an aqueous solution which includes adenine, dextrose, mannitol, citrate ion, and dihydrogen phosphate ion, but no sodium chloride, in an oxygen-permeable container which is located in an oxygen-free environment containing oxygen-scavenging materials. 8 figs.

  8. Prolonged cold storage of red blood cells by oxygen removal and additive usage

    DOE Patents [OSTI]

    Bitensky, Mark W.; Yoshida, Tatsuro

    1998-01-01

    Prolonged cold storage of red blood cells by oxygen removal and additive usage. A cost-effective, 4.degree. C. storage procedure that preserves red cell quality and prolongs post-transfusion in vivo survival is described. The improved in vivo survival and the preservation of adenosine triphosphate levels, along with reduction in hemolysis and membrane vesicle production of red blood cells stored at 4.degree. C. for prolonged periods of time, is achieved by reducing the oxygen level therein at the time of storage; in particular, by flushing the cells with an inert gas, and storing them in an aqueous solution which includes adenine, dextrose, mannitol, citrate ion, and dihydrogen phosphate ion, but no sodium chloride, in an oxygen-permeable container which is located in an oxygen-free environment containing oxygen-scavenging materials.

  9. Hydrothermal synthesis and characteristics of anions-doped calcium molybdate red powder phosphors

    SciTech Connect (OSTI)

    Shi, Shikao; Zhang, Yan; Liu, Qing; Zhou, Ji

    2013-10-15

    Graphical abstract: - Highlights: Four anion-doped CaMoO{sub 4}:Eu{sup 3+} red phosphors were prepared by hydrothermal approach. Some samples exhibit nearly spherical morphology and well-distributed fine particles. The red luminescence can be obviously enhanced after certain amount of anion doping. The improved phosphor system is a potential candidate for white LED applications. - Abstract: Applying hydrothermal and subsequent heat-treatment process, CaMoO{sub 4}:Eu{sup 3+} was doped with four anions (SiO{sub 3}{sup 2?}, PO{sub 4}{sup 3?}, SO{sub 4}{sup 2?} and ClO{sub 3}{sup ?}) to prepare fine red powder phosphors. The introduction of small amount of anions into the host had little influence on the structure, which was confirmed by X-ray diffraction patterns. The anion-doped phosphor samples (except SiO{sub 3}{sup 2?}) exhibited nearly spherical morphology, and the particle sizes were in the range of 0.30.4 ?m for SO{sub 4}{sup 2?}-doped samples, and 0.81.2 ?m for PO{sub 4}{sup 3?} and ClO{sub 3}{sup ?}-doped samples. Excited with 395 nm near-UV light, all samples showed typical Eu{sup 3+} red emission at 615 nm, and PO{sub 4}{sup 3?}, SO{sub 4}{sup 2?} and ClO{sub 3}{sup ?}-doped samples enhanced the red luminescence as compared with the individual CaMoO{sub 4}:Eu{sup 3+} sample. In particular, relative emission intensity for optimum ClO{sub 3}{sup ?}-doped phosphors reached more than 6-fold that of the commercial red phosphor, which is highly desirable for the powder phosphors used in the solid-state lighting industry.

  10. redMaPPer. I. Algorithm and SDSS DR8 catalog

    SciTech Connect (OSTI)

    Rykoff, E. S.; Rozo, E.; Reddick, R.; Wechsler, R. H.; Busha, M. T.; Cunha, C. E.; Finoguenov, A.; Evrard, A.; Koester, B. P.; Hao, J.; Nord, B.; Leauthaud, A.; Pierre, M.; Sadibekova, T.; Sheldon, E. S.

    2014-04-20

    We describe redMaPPer, a new red sequence cluster finder specifically designed to make optimal use of ongoing and near-future large photometric surveys. The algorithm has multiple attractive features: (1) it can iteratively self-train the red sequence model based on a minimal spectroscopic training sample, an important feature for high-redshift surveys. (2) It can handle complex masks with varying depth. (3) It produces cluster-appropriate random points to enable large-scale structure studies. (4) All clusters are assigned a full redshift probability distribution P(z). (5) Similarly, clusters can have multiple candidate central galaxies, each with corresponding centering probabilities. (6) The algorithm is parallel and numerically efficient: it can run a Dark Energy Survey-like catalog in ?500 CPU hours. (7) The algorithm exhibits excellent photometric redshift performance, the richness estimates are tightly correlated with external mass proxies, and the completeness and purity of the corresponding catalogs are superb. We apply the redMaPPer algorithm to ?10, 000 deg{sup 2} of SDSS DR8 data and present the resulting catalog of ?25,000 clusters over the redshift range z in [0.08, 0.55]. The redMaPPer photometric redshifts are nearly Gaussian, with a scatter ? {sub z} ? 0.006 at z ? 0.1, increasing to ? {sub z} ? 0.02 at z ? 0.5 due to increased photometric noise near the survey limit. The median value for |?z|/(1 + z) for the full sample is 0.006. The incidence of projection effects is low (?5%). Detailed performance comparisons of the redMaPPer DR8 cluster catalog to X-ray and Sunyaev-Zel'dovich catalogs are presented in a companion paper.

  11. Crystallographic study of red fluorescent protein eqFP578 and its far-red variant Katushka reveals opposite pH-induced isomerization of chromophore

    SciTech Connect (OSTI)

    Pletneva, Nadya V.; Pletnev, Vladimir Z.; Shemiakina, Irina I.; Chudakov, Dmitriy M.; Artemyev, Igor; Wlodawer, Alexander; Dauter, Zbigniew; Pletnev, Sergei

    2012-08-10

    The wild type red fluorescent protein eqFP578 (from sea anemone Entacmaea quadricolor, {lambda}{sub ex} = 552 nm, {lambda}{sub em} = 578 nm) and its bright far-red fluorescent variant Katushka ({lambda}{sub ex} = 588 nm, {lambda}{sub em} = 635 nm) are characterized by the pronounced pH dependence of their fluorescence. The crystal structures of eqFP578f (eqFP578 with two point mutations improving the protein folding) and Katushka have been determined at the resolution ranging from 1.15 to 1.85 {angstrom} at two pH values, corresponding to low and high level of fluorescence. The observed extinguishing of fluorescence upon reducing pH in eqFP578f and Katushka has been shown to be accompanied by the opposite trans-cis and cis-trans chromophore isomerization, respectively. Asn143, Ser158, His197 and Ser143, Leu174, and Arg197 have been shown to stabilize the respective trans and cis fluorescent states of the chromophores in eqFP578f and Katushka at higher pH. The cis state has been suggested as being primarily responsible for the observed far-red shift of the emission maximum of Katushka relative to that of eqFP578f.

  12. Efficient utilization of red maple lumber in glued-laminated timber beams. Forest Service research paper

    SciTech Connect (OSTI)

    Janowiak, J.J.; Manbeck, H.B.; Hernandez, R.; Moody, R.C.; Blankenhorn, P.R.

    1995-09-01

    The feasibility of utilizing cant-sawn hardwood lumber, which would not usually be desired for furniture manufacture, was studied for the manufacture of structural glue-laminated (glulam) timber. Two red maple beam combinations were evaluated. Test results of 42 red maple glulam beams showed that it was feasible to develop structural glulam timber from cant-swan lumber. The glulam combinations made from E-rated lumber exceeded the target design bending stress of 2,400 lb/in 2 and met the target modulus of elasticity (MOE) of 1.8 x 106 lb/in 2.

  13. Mitigating PQ Problems in Legacy Data Centers

    SciTech Connect (OSTI)

    Ilinets, Boris; /SLAC

    2011-06-01

    The conclusions of this presentation are: (1) Problems with PQ in legacy data centers still exist and need to be mitigated; (2) Harmonics generated by non-linear IT load can be lowered by passive, active and hybrid cancellation methods; (3) Harmonic study is necessary to find the best way to treat PQ problems; (4) AHF's and harmonic cancellation transformers proved to be very efficient in mitigating PQ problems; and (5) It is important that IT leaders partner with electrical engineering to appropriate ROI statements, justifying many of these expenditures.

  14. SIENA Customer Problem Statement and Requirements

    SciTech Connect (OSTI)

    L. Sauer; R. Clay; C. Adams; H. Walther; B. Allan; R. Mariano; C. Poore; B. Whiteside; B. Boughton; J. Dike; E. Hoffman; R. Hogan; C. LeGall

    2000-08-01

    This document describes the problem domain and functional requirements of the SIENA framework. The software requirements and system architecture of SIENA are specified in separate documents (called SIENA Software Requirement Specification and SIENA Software Architecture, respectively). While currently this version of the document describes the problems and captures the requirements within the Analysis domain (concentrating on finite element models), it is our intention to subsequent y expand this document to describe problems and capture requirements from the Design and Manufacturing domains. In addition, SIENA is designed to be extendible to support and integrate elements from the other domains (see SIENA Software Architecture document).

  15. Standard Problems for CFD Validation for NGNP - Status Report

    SciTech Connect (OSTI)

    Richard W. Johnson; Richard R. Schultz

    2010-08-01

    optics used for data gathering. Particle image velocimetry (PIV) is used to take the data. The first standard problem represents several flow physics expected to be present in the lower plenum of the prismatic VHTR. In the lower plenum, heated helium coolant in the form of jets issues downward into the plenum and is then forced to turn ninety degrees and flow toward the exit duct. The lower plenum is filled with cylindrical graphite posts that hold up the core. Figure S-1 provides a plan view of the lower plenum. The red circles represent support posts holding up columns of heated blocks. Grey circles represent support posts under columns of reflector blocks. Helium enters the lower plenum at the junctions of the hexagonal blocks.

  16. Creative problem solving at Rocky Reach

    SciTech Connect (OSTI)

    Bickford, B.M.; Garrison, D.H.

    1997-04-01

    Tainter gate inspection and thrust bearing cooling system problems at the 1287-MW Rocky Reach hydroelectric project on the Columbia River in Washington are described. Gate inspection was initiated in response to a failure of similar gates at Folsom Dam. The approach involved measuring the actual forces on the gates and comparing them to original model study parameters, rather than the traditional method of building a hydraulic model. Measurement and visual inspection was completed in one day and had no effect on migration flows. Two problems with the thrust bearing cooling system are described. First, whenever a generating unit was taken off line, cooling water continued circulating and lowered oil temperatures. The second problem involved silt buildup in flow measuring device tubes on the cooling water system. Modifications to correct cooling system problems and associated costs are outlined.

  17. Modeling the black hole excision problem

    SciTech Connect (OSTI)

    Szilagyi, B.; Winicour, J.; Kreiss, H.-O.

    2005-05-15

    We analyze the excision strategy for simulating black holes. The problem is modeled by the propagation of quasilinear waves in a 1-dimensional spatial region with timelike outer boundary, spacelike inner boundary and a horizon in between. Proofs of well-posed evolution and boundary algorithms for a second differential order treatment of the system are given for the separate pieces underlying the finite-difference problem. These are implemented in a numerical code which gives accurate long term simulations of the quasilinear excision problem. Excitation of long wavelength exponential modes, which are latent in the problem, are suppressed using conservation laws for the discretized system. The techniques are designed to apply directly to recent codes for the Einstein equations based upon the harmonic formulation.

  18. Frequency Instability Problems in North American Interconnections

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Frequency Instability Problems in North American Interconnections May 1, 2011 DOE/NETL-2011/1473 Frequency Instability Problems in North American Interconnections Disclaimer This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness

  19. Geological problems in radioactive waste isolation

    SciTech Connect (OSTI)

    Witherspoon, P.A.

    1991-01-01

    The problem of isolating radioactive wastes from the biosphere presents specialists in the fields of earth sciences with some of the most complicated problems they have ever encountered. This is especially true for high level waste (HLW) which must be isolated in the underground and away from the biosphere for thousands of years. Essentially every country that is generating electricity in nuclear power plants is faced with the problem of isolating the radioactive wastes that are produced. The general consensus is that this can be accomplished by selecting an appropriate geologic setting and carefully designing the rock repository. Much new technology is being developed to solve the problems that have been raised and there is a continuing need to publish the results of new developments for the benefit of all concerned. The 28th International Geologic Congress that was held July 9--19, 1989 in Washington, DC provided an opportunity for earth scientists to gather for detailed discussions on these problems. Workshop W3B on the subject, Geological Problems in Radioactive Waste Isolation -- A World Wide Review'' was organized by Paul A Witherspoon and Ghislain de Marsily and convened July 15--16, 1989 Reports from 19 countries have been gathered for this publication. Individual papers have been cataloged separately.

  20. Thick diffusion limit boundary layer test problems

    SciTech Connect (OSTI)

    Bailey, T. S.; Warsa, J. S.; Chang, J. H.; Adams, M. L.

    2013-07-01

    We develop two simple test problems that quantify the behavior of computational transport solutions in the presence of boundary layers that are not resolved by the spatial grid. In particular we study the quantitative effects of 'contamination' terms that, according to previous asymptotic analyses, may have a detrimental effect on the solutions obtained by both discontinuous finite element (DFEM) and characteristic-method (CM) spatial discretizations, at least for boundary layers caused by azimuthally asymmetric incident intensities. Few numerical results have illustrated the effects of this contamination, and none have quantified it to our knowledge. Our test problems use leading-order analytic solutions that should be equal to zero in the problem interior, which means the observed interior solution is the error introduced by the contamination terms. Results from DFEM solutions demonstrate that the contamination terms can cause error propagation into the problem interior for both orthogonal and non-orthogonal grids, and that this error is much worse for non-orthogonal grids. This behavior is consistent with the predictions of previous analyses. We conclude that these boundary layer test problems and their variants are useful tools for the study of errors that are introduced by unresolved boundary layers in diffusive transport problems. (authors)

  1. Method and kit for the selective labeling of red blood cells in whole blood with TC-99M

    DOE Patents [OSTI]

    Srivastava, Suresh C.; Babich, John W.; Straub, Rita; Richards, Powell

    1988-01-01

    Disclosed herein are a method and kit for the preparation of .sup.99m Tc labeled red blood cells using whole blood in a closed sterile system containing stannous tin in a form such that it will enter the red blood cells and be available therein for the reduction of technetium.

  2. Method and kit for the selective labeling of red blood cells in whole blood with Tc-99m

    DOE Patents [OSTI]

    Srivastava, S.C.; Babich, J.W.; Straub, R.; Richards, P.

    1988-07-05

    Disclosed herein are a method and kit for the preparation of [sup 99m]Tc labeled red blood cells using whole blood in a closed sterile system containing stannous tin in a form such that it will enter the red blood cells and be available for the reduction of technetium. No Drawings

  3. Hydrogen-terminated silicon nanowire photocatalysis: Benzene oxidation and methyl red decomposition

    SciTech Connect (OSTI)

    Lian, Suoyuan; School of Chemical Engineering and Materials, Dalian Polytechnic University, Dalian 116034 ; Tsang, Chi Him A.; Centre of Super Diamond and Advanced Films, City University of Hong Kong, Hong Kong ; Kang, Zhenhui; Liu, Yang; Wong, Ningbew; Lee, Shuit-Tong; Centre of Super Diamond and Advanced Films, City University of Hong Kong, Hong Kong

    2011-12-15

    Graphical abstract: H-SiNWs can catalyze hydroxylation of benzene and degradation of methyl red under visible light irradiation. Highlights: Black-Right-Pointing-Pointer Hydrogen-terminated silicon nanowires were active photocatalyst in the hydroxylation of benzene under light. Black-Right-Pointing-Pointer Hydrogen-terminated silicon nanowires were also effective in the decomposition of methyl red dye. Black-Right-Pointing-Pointer The Si/SiO{sub x} core-shell structure is the main reason of the obtained high selectivity during the hydroxylation. -- Abstract: Hydrogen-terminated silicon nanowires (H-SiNWs) were used as heterogeneous photocatalysts for the hydroxylation of benzene and for the decomposition of methyl red under visible light irradiation. The above reactions were monitored by GC-MS and UV-Vis spectrophotometry, respectively, which shows 100% selectivity for the transformation of benzene to phenol. A complete decomposition of a 2 Multiplication-Sign 10{sup -4} M methyl red solution was achieved within 30 min. The high selectivity for the hydroxylation of benzene and the photodecomposition demonstrate the catalytic activity of ultrafine H-SiNWs during nanocatalysis.

  4. Raman scattering and red fluorescence in the photochemical transformation of dry tryptophan particles

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Lai, Chih Wei; Schwab, Mark; Hill, Steven C.; Santarpia, Joshua; Pan, Yong -Le

    2016-05-19

    Tryptophan is a fluorescent amino acid common in proteins. Its absorption is largest for wavelengths λ ≲ 290 nm and its fluorescence emissions peak around 300–350 nm, depending upon the local environment. Here we report the observation of red fluorescence near 600 nm emerging from 488-nm continuous-wave (CW) laser photoexcitation of dry tryptophan (Trp) particles. With an excitation intensity below 0.5 kW/cm2, dry Trp particles yield distinctive Raman scattering peaks in the presence of relatively weak and spectrally broad emissions with λ ~500–700 nm, allowing estimation of particle temperature at low excitation intensities. When the photoexcitation intensity is increased tomore » 1 kW/cm2 or more for a few minutes, fluorescence intensity dramatically increases by more than two orders of magnitude. The fluorescence continues to increase in intensity and gradually shift to the red when photoexcitation intensity and the duration of exposure are increased. The resulting products absorb at visible wavelengths and generate red fluorescence with λ ~ 650–800 nm with 633-nm CW laser excitation. In conclusion, we attribute the emergence of orange and red fluorescence in the Trp products to a photochemical transformation that is instigated by weak optical transitions to triplet states in Trp with 488-nm excitation and which may be expedited by a photothermal effect.« less

  5. ASTEROSEISMIC CLASSIFICATION OF STELLAR POPULATIONS AMONG 13,000 RED GIANTS OBSERVED BY KEPLER

    SciTech Connect (OSTI)

    Stello, Dennis; Bedding, Timothy R.; Benomar, Othman; White, Timothy R.; Huber, Daniel; Bildsten, Lars; Paxton, Bill; Elsworth, Yvonne P.; Gilliland, Ronald L.; Mosser, Benoit

    2013-03-10

    Of the more than 150,000 targets followed by the Kepler Mission, about 10% were selected as red giants. Due to their high scientific value, in particular for Galaxy population studies and stellar structure and evolution, their Kepler light curves were made public in late 2011. More than 13,000 (over 85%) of these stars show intrinsic flux variability caused by solar-like oscillations making them ideal for large-scale asteroseismic investigations. We automatically extracted individual frequencies and measured the period spacings of the dipole modes in nearly every red giant. These measurements naturally classify the stars into various populations, such as the red giant branch, the low-mass (M/M{sub Sun} {approx}< 1.8) helium-core-burning red clump, and the higher-mass (M/M{sub Sun} {approx}> 1.8) secondary clump. The period spacings also reveal that a large fraction of the stars show rotationally induced frequency splittings. This sample of stars will undoubtedly provide an extremely valuable source for studying the stellar population in the direction of the Kepler field, in particular when combined with complementary spectroscopic surveys.

  6. MULTI-EPOCH OBSERVATIONS OF THE RED WING EXCESS IN THE SPECTRUM OF 3C 279

    SciTech Connect (OSTI)

    Punsly, Brian E-mail: brian.punsly@comdev-usa.com

    2013-01-10

    It has been previously determined that there is a highly significant correlation between the spectral index from 10 GHz to 1350 A and the amount of excess luminosity in the red wing of quasar C IV {lambda}1549 broad emission lines (BELs). Ostensibly, the prominence of the red excess is associated with the radio jet emission mechanism and is most pronounced for lines of sight close to the jet axis. Studying the scant significant differences in the UV spectra of radio-loud and radio-quiet quasars might provide vital clues to the origin of the unknown process that creates powerful relativistic jets that appear in only about 10% of quasars. In this study, the phenomenon is explored with multi-epoch observations of the Mg II {lambda}2798 broad line in 3C 279 which has one of the largest known red wing excesses in a quasar spectrum. The amount of excess that is detected appears to be independent of all directly observed optical continuum, radio, or submillimeter properties (fluxes or polarizations). The only trend that occurs in this sparse data is: the stronger the BEL, the larger the fraction of flux that resides in the red wing. It is concluded that more monitoring is needed and spectropolarimetry with a large telescope is essential during low states to understand more.

  7. May 12 EXPO Event Schedule 8:00-11:00 Red Cross Blood Drive Bloodmobil...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    May 12 EXPO Event Schedule 8:00-11:00 Red Cross Blood Drive Bloodmobile 10:00 & 3:30 Vehicle Accident Demo Arena 5:00-6:30 Bike Rodeo Arena May 13 EXPO Event Schedule 7:30-9:00 MSA...

  8. Stacked white OLED having separate red, green and blue sub-elements

    SciTech Connect (OSTI)

    Forrest, Stephen; Qi, Xiangfei; Slootsky, Michael

    2015-06-23

    The present invention relates to efficient organic light emitting devices (OLEDs). More specifically, the present invention relates to white-emitting OLEDs, or WOLEDs. The devices of the present invention employ three emissive sub-elements, typically emitting red, green and blue, to sufficiently cover the visible spectrum. The sub-elements are separated by charge generating layers.

  9. Using red clump stars to decompose the galactic magnetic field with distance

    SciTech Connect (OSTI)

    Pavel, Michael D.

    2014-09-01

    A new method for measuring the large-scale structure of the Galactic magnetic field is presented. The Galactic magnetic field has been probed through the Galactic disk with near-infrared starlight polarimetry; however, the distance to each background star is unknown. Using red clump stars as near-infrared standard candles, this work presents the first attempt to decompose the line-of-sight structure of the sky-projected Galactic magnetic field. Two example lines of sight are decomposed: toward a field with many red clump stars and toward a field with few red clump stars. A continuous estimate of magnetic field orientation over several kiloparsecs of distance is possible in the field with many red clump stars, while only discrete estimates are possible in the sparse example. Toward the outer Galaxy, there is a continuous field orientation with distance that shows evidence of perturbation by the Galactic warp. Toward the inner Galaxy, evidence for a large-scale change in the magnetic field geometry is consistent with models of magnetic field reversals, independently derived from Faraday rotation studies. A photo-polarimetric method for identifying candidate intrinsically polarized stars is also presented. The future application of this method to large regions of the sky will begin the process of mapping the Galactic magnetic field in a way never before possible.

  10. Radial velocity curves of ellipsoidal red giant binaries in the Large Magellanic Cloud

    SciTech Connect (OSTI)

    Nie, J. D.; Wood, P. R. E-mail: peter.wood@anu.edu.au

    2014-12-01

    Ellipsoidal red giant binaries are close binary systems where an unseen, relatively close companion distorts the red giant, leading to light variations as the red giant moves around its orbit. These binaries are likely to be the immediate evolutionary precursors of close binary planetary nebula and post-asymptotic giant branch and post-red giant branch stars. Due to the MACHO and OGLE photometric monitoring projects, the light variability nature of these ellipsoidal variables has been well studied. However, due to the lack of radial velocity curves, the nature of their masses, separations, and other orbital details has so far remained largely unknown. In order to improve this situation, we have carried out spectral monitoring observations of a large sample of 80 ellipsoidal variables in the Large Magellanic Cloud and we have derived radial velocity curves. At least 12 radial velocity points with good quality were obtained for most of the ellipsoidal variables. The radial velocity data are provided with this paper. Combining the photometric and radial velocity data, we present some statistical results related to the binary properties of these ellipsoidal variables.

  11. Infra-red detector and method of making and using same

    DOE Patents [OSTI]

    Craig, Richard A.; Griffin, Jeffrey W.

    2007-02-20

    A low-cost infra-red detector is disclosed including a method of making and using the same. The detector employs a substrate, a filtering layer, a converting layer, and a diverter to be responsive to wavelengths up to about 1600 nm. The detector is useful for a variety of applications including spectroscopy, imaging, and defect detection.

  12. Red, green, and blue lasing enabled by single-exciton gain in colloidal quantum dot films

    DOE Patents [OSTI]

    Nurmikko, Arto V.; Dang, Cuong

    2016-06-21

    The methods and materials described herein contemplate the use films of colloidal quantum dots as a gain medium in a vertical-cavity surface-emitting laser. The present disclosure demonstrates a laser with single-exciton gain in the red, green, and blue wavelengths. Leveraging this nanocomposite gain, the results realize a significant step toward full-color single-material lasers.

  13. Surface activity and oscillation amplitudes of red giants in eclipsing binaries

    SciTech Connect (OSTI)

    Gaulme, P.; Jackiewicz, J.; Appourchaux, T.; Mosser, B.

    2014-04-10

    Among the 19 red-giant stars belonging to eclipsing binary systems that have been identified in Kepler data, 15 display solar-like oscillations. We study whether the absence of mode detection in the remaining 4 is an observational bias or possibly evidence of mode damping that originates from tidal interactions. A careful analysis of the corresponding Kepler light curves shows that modes with amplitudes that are usually observed in red giants would have been detected if they were present. We observe that mode depletion is strongly associated with short-period systems, in which stellar radii account for 16%-24% of the semi-major axis, and where red-giant surface activity is detected. We suggest that when the rotational and orbital periods synchronize in close binaries, the red-giant component is spun up, so that a dynamo mechanism starts and generates a magnetic field, leading to observable stellar activity. Pressure modes would then be damped as acoustic waves dissipate in these fields.

  14. Stacked white OLED having separate red, green and blue sub-elements

    DOE Patents [OSTI]

    Forrest, Stephen; Qi, Xiangfei; Slootsky, Michael

    2016-06-28

    The present invention relates to efficient organic light emitting devices (OLEDs). More specifically, the present invention relates to white-emitting OLEDs, or WOLEDs. The devices of the present invention employ three emissive sub-elements, typically emitting red, green and blue, to sufficiently cover the visible spectrum. The sub-elements are separated by charge generating layers.

  15. Protect and Restore Red River Watershed, 2007-2008 Annual Report.

    SciTech Connect (OSTI)

    Bransford, Stephanie

    2009-05-04

    The Nez Perce Tribe Department of Fisheries Resource Management, Watershed Division approaches watershed restoration with a ridge-top to ridge-top approach. The Nez Perce Tribe (NPT) and the Nez Perce National Forest (NPNF) have formed a partnership in completing watershed restoration activities, and through this partnership more work is accomplished by sharing funding and resources in our effort. The Nez Perce Tribe began watershed restoration projects within the Red River Watershed of the South Fork Clearwater River in 2001. Progress has been made in restoring the watershed through road decommissioning and culvert replacement. From completing a watershed assessment to two NEPA efforts and a final stream restoration design, we will begin the effort of restoring the mainstem channel of Red River to provide spawning and rearing habitat for anadromous and resident fish species. Roads have been surveyed and prioritized for removal or improvement as well as culverts being prioritized for replacement to accommodate fish passage throughout the watershed. Another major, and extremely, important component of this project is the Red River Meadow Conservation Easement. We have begun the process of pursuing a conservation easement on approximately 270 acres of prime meadow habitat (Red River runs through this meadow and is prime spawning and rearing habitat).

  16. DYNA3D example problem manual

    SciTech Connect (OSTI)

    Lovejoy, S.C.; Whirley, R.G.

    1990-10-10

    This manual describes in detail the solution of ten example problems using the explicit nonlinear finite element code DYNA3D. The sample problems include solid, shell, and beam element types, and a variety of linear and nonlinear material models. For each example, there is first an engineering description of the physical problem to be studied. Next, the analytical techniques incorporated in the model are discussed and key features of DYNA3D are highlighted. INGRID commands used to generate the mesh are listed, and sample plots from the DYNA3D analysis are given. Finally, there is a description of the TAURUS post-processing commands used to generate the plots of the solution. This set of example problems is useful in verifying the installation of DYNA3D on a new computer system. In addition, these documented analyses illustrate the application of DYNA3D to a variety of engineering problems, and thus this manual should be helpful to new analysts getting started with DYNA3D. 7 refs., 56 figs., 9 tabs.

  17. Particle physics confronts the solar neutrino problem

    SciTech Connect (OSTI)

    Pal, P.B.

    1991-06-01

    This review has four parts. In Part I, we describe the reactions that produce neutrinos in the sun and the expected flux of those neutrinos on the earth. We then discuss the detection of these neutrinos, and how the results obtained differ from the theoretical expectations, leading to what is known as the solar neutrino problem. In Part II, we show how neutrino oscillations can provide a solution to the solar neutrino problem. This includes vacuum oscillations, as well as matter enhanced oscillations. In Part III, we discuss the possibility of time variation of the neutrino flux and how a magnetic moment of the neutrino can solve the problem. WE also discuss particle physics models which can give rise to the required values of magnetic moments. In Part IV, we present some concluding remarks and outlook for the recent future.

  18. Transport Test Problems for Hybrid Methods Development

    SciTech Connect (OSTI)

    Shaver, Mark W.; Miller, Erin A.; Wittman, Richard S.; McDonald, Benjamin S.

    2011-12-28

    This report presents 9 test problems to guide testing and development of hybrid calculations for the ADVANTG code at ORNL. These test cases can be used for comparing different types of radiation transport calculations, as well as for guiding the development of variance reduction methods. Cases are drawn primarily from existing or previous calculations with a preference for cases which include experimental data, or otherwise have results with a high level of confidence, are non-sensitive, and represent problem sets of interest to NA-22.

  19. THE ARAUCARIA PROJECT. POPULATION EFFECTS ON THE V- AND I-BAND MAGNITUDES OF RED CLUMP STARS

    SciTech Connect (OSTI)

    Pietrzynski, Grzegorz; Gieren, Wolfgang; Gorski, Marek; Udalski, Andrzej; Ciechanowska, Anna; Laney, David E-mail: pietrzyn@astrouw.edu.p E-mail: udalski@astrouw.edu.p E-mail: cdl@saao.ac.z

    2010-10-15

    We present measurements of the V- and I-band magnitudes of red clump stars in 15 nearby galaxies obtained from recently published homogeneous Hubble Space Telescope photometry. Supplementing these results with similar data for another eight galaxies available in the literature, the populational effects on the V- and I-band magnitudes of red clump stars were investigated. Comparing red clump magnitudes with the I-band magnitude of the tip of the red giant branch in a total sample of 23 galaxies possessing very different environments, we demonstrate that population effects strongly affect both the V- and I-band magnitude of red clump stars in a complex way. Our empirical results basically confirm the theoretical results of Girardi and Salaris, and show that optical (V - I) photometry of red clump stars is not an accurate method for the determination of distances to nearby galaxies at the present moment, as long as the population effects are not better calibrated, both empirically and theoretically. Near-infrared photometry is a much better way to measure galaxy distances with red clump stars given its smaller sensitivity to population effects.

  20. Motor operated valves problems tests and simulations

    SciTech Connect (OSTI)

    Pinier, D.; Haas, J.L.

    1996-12-01

    An analysis of the two refusals of operation of the EAS recirculation shutoff valves enabled two distinct problems to be identified on the motorized valves: the calculation methods for the operating torques of valves in use in the power plants are not conservative enough, which results in the misadjustement of the torque limiters installed on their motorizations, the second problem concerns the pressure locking phenomenon: a number of valves may entrap a pressure exceeding the in-line pressure between the disks, which may cause a jamming of the valve. EDF has made the following approach to settle the first problem: determination of the friction coefficients and the efficiency of the valve and its actuator through general and specific tests and models, definition of a new calculation method. In order to solve the second problem, EDF has made the following operations: identification of the valves whose technology enables the pressure to be entrapped: the tests and numerical simulations carried out in the Research and Development Division confirm the possibility of a {open_quotes}boiler{close_quotes} effect: determination of the necessary modifications: development and testing of anti-boiler effect systems.

  1. Solving the problems of infectious waste disposal

    SciTech Connect (OSTI)

    Hoffman, S.L.; Cabral, N.J. )

    1989-06-01

    Lawmakers are increasing pressures to ensure safe, appropriate disposal of infectious waste. This article discusses the problems, the regulatory climate, innovative approaches, and how to pay for them. The paper discusses the regulatory definition of infectious waste, federal and state regulations, and project finance.

  2. The scattering problem for nonlocal potentials

    SciTech Connect (OSTI)

    Zolotarev, V A

    2014-11-30

    We solve the direct and inverse scattering problems for integro-differential operators which are one-dimensional perturbations of the self-adjoint second derivative operator on the half-axis. We also describe the scattering data for this class of operators. Bibliography: 28 titles.

  3. Microsoft PowerPoint - SAND2005-2351C_RedStormEarlyExperiences [Read-Only]

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    multiprogram laboratory operated by Sandia Corporation, a Lockheed Martin Company, for the United States Department of Energy's National Nuclear Security Administration under contract DE-AC04-94AL85000. Early Experience with Red Storm April 19, 2005 Sue Kelly and Bob Ballance Sandia National Laboratories smkelly@sandia.gov, 505-845-9770 Outline of Talk * Overview of Red Storm * Where we are * How we got here * Where we're going * What we learned Red Storm is a Massively Parallel Processor Users

  4. A LITHIUM-RICH RED GIANT BELOW THE CLUMP IN THE KEPLER CLUSTER, NGC 6819

    SciTech Connect (OSTI)

    Anthony-Twarog, Barbara J.; Rich, Evan; Twarog, Bruce A.; Deliyannis, Constantine P. E-mail: evan66210@gmail.com E-mail: con@astro.indiana.edu

    2013-04-10

    WIYN/HYDRA spectra in the Li 6708 A region have been obtained for 332 probable members of the old open cluster, NGC 6819. Preliminary analysis shows a pattern of Li depletion from the top of the turnoff to the base of the giant branch. Starting 1 mag below the level of the clump, all brighter giants have A(Li) below 1.0, with most having upper limits below 0.5. Star W007017, located below the first-ascent red giant bump is Li-rich with A(Li) = 2.3. As a highly probable single-star astrometric and radial-velocity cluster member, its discrepant asteroseismic membership could be a by-product of the processes that triggered Li enhancement. Its color-magnitude diagram location is consistent with only one proposed enhanced mixing process among first-ascent red giants.

  5. Red Lake Band of Chippewa Indians: Biomass Energy Feasiblity Study Update

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Health and Bioenergy: Technology Opportunities and Barriers Scott Haase McNeil Technologies June 20, 2003 Red Lake Band of Chippewa Indians: Biomass Energy Feasibility Study Update Presented to DOE Tribal Energy Program Scott Haase October 19, 2004 * Project overview * Resource assessment * Assess on-site electric and thermal applications * Assess local/regional utility market * Economic analysis * Alternative products Presentation Outline * Evaluate and determine potential options for creating

  6. Redbird Red Habitat for Humanity Net Zero Energy Home Project Summary

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Redbird Red Habitat for Humanity Net Zero Energy Home Project Summary The Illinois State University team incorporated Habitat for Humanity's goals and constraints during the design process, as well as designing it to be zero barrier and ADA compliant. Throughout the process the team utilized the existing plan to have a direct comparison to the typical home Habitat for Humanity builds. In addition, the team designed the exterior of the home to compliment the surrounding architecture as well as

  7. Project Reports for Red Lake Band of Chippewa Indians- 2003 Project

    Broader source: Energy.gov [DOE]

    The Red Lake Band of Chippewa Indians, located in the northwest corner of Minnesota near the Canadian border, will assess the potential to expand the use of biomass resources for energy autonomy and economic development on tribal lands. Specifically, the tribe will evaluate the technical, market, financial, and cultural aspects of using its extensive, forested lands to create a sustainable bioproducts-based business and will develop a business plan to guide tribal industry development.

  8. Synthesis and characterization of black, red and yellow nanoparticles pigments from the iron sand

    SciTech Connect (OSTI)

    Mufti, Nandang Atma, T. Fuad, A.; Sutadji, E.

    2014-09-25

    The aim of this research is to synthesize nanoparticles of black pigment of Magnetite (Fe{sub 3}O{sub 4}), red pigment of hematite (α-Fe{sub 2}O{sub 3}), and yellow pigment of ghoetite (α-FeOOH) from the iron sand. The black pigment of Fe{sub 3}O{sub 4} and the yellow pigment α-FeOOH nanoparticles were synthesized by coprecipitation method with variation of pH. Whereas, the red pigment Fe{sub 2}O{sub 3} was synthesized by sintering Fe{sub 3}O{sub 4} nanoparticles at temperature between 400 °C and 700 7°C for 1 hour. All the pigments has been characterized using X-ray diffraction and SEM. The XRD results shown that the particle size of the black pigmen Fe{sub 3}O{sub 4}, red pigment Fe{sub 3}O{sub 4} and yellow pigment α-FeOOH are around 12, 32, and 30 nm respectively. The particle size of Fe{sub 2}O{sub 3} nanoparticles increase by increasing sintering temperature from 32 nm at 400 °C to 39 nm at 700 °C. For yellow pigment of α-FeOOH, the particle size increase by increasing pH from 30,54 nm at pH 4 to 48,60 nm at pH 7. The SEM results shown that the morphologies of black, yellow and red pigments are aglomarated.

  9. Impact of P and T on geological repositories an overview of the EURATOM red impact project

    SciTech Connect (OSTI)

    Westlen, Daniel; Norris, Simon; Gonzalez-Romero, Enrique M.; Greneche, Dominique; Boucher, Lionel; Marivoet, Jan; Zimmerman, Colin; von Lensa, Werner

    2007-07-01

    The European Commission project Red Impact is in a state of conclusion after three years. Within the project, the consequences of P and T on, mainly, geological disposal have been investigated. Six scenarios have been developed, including three considered to be deployable today, and three more advanced scenarios including P and T in different ways. The scenarios all have different strengths and weaknesses, which are discussed in the present paper. (authors)

  10. INTELLIGENT COMPUTING SYSTEM FOR RESERVOIR ANALYSIS AND RISK ASSESSMENT OF THE RED RIVER FORMATION

    SciTech Connect (OSTI)

    Mark A. Sippel; William C. Carrigan; Kenneth D. Luff; Lyn Canter

    2003-11-12

    Integrated software has been written that comprises the tool kit for the Intelligent Computing System (ICS). The software tools in ICS have been developed for characterization of reservoir properties and evaluation of hydrocarbon potential using a combination of inter-disciplinary data sources such as geophysical, geologic and engineering variables. The ICS tools provide a means for logical and consistent reservoir characterization and oil reserve estimates. The tools can be broadly characterized as (1) clustering tools, (2) neural solvers, (3) multiple-linear regression, (4) entrapment-potential calculator and (5) file utility tools. ICS tools are extremely flexible in their approach and use, and applicable to most geologic settings. The tools are primarily designed to correlate relationships between seismic information and engineering and geologic data obtained from wells, and to convert or translate seismic information into engineering and geologic terms or units. It is also possible to apply ICS in a simple framework that may include reservoir characterization using only engineering, seismic, or geologic data in the analysis. ICS tools were developed and tested using geophysical, geologic and engineering data obtained from an exploitation and development project involving the Red River Formation in Bowman County, North Dakota and Harding County, South Dakota. Data obtained from 3D seismic surveys, and 2D seismic lines encompassing nine prospective field areas were used in the analysis. The geologic setting of the Red River Formation in Bowman and Harding counties is that of a shallow-shelf, carbonate system. Present-day depth of the Red River formation is approximately 8000 to 10,000 ft below ground surface. This report summarizes production results from well demonstration activity, results of reservoir characterization of the Red River Formation at demonstration sites, descriptions of ICS tools and strategies for their application.

  11. Biographical sketch - Kevin Redding | Center for Bio-Inspired Solar Fuel

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Production Kevin Redding a. Professional Preparation Rice University Biochemistry B. S., 1987 Stanford University Biochemistry Ph. D., 1993 University of Geneva Mol. Biology Postdoctoral studies, 1994 - 1998 b. Area of Specialization: Structure/function analysis of biological electron transfer c. Appointments Arizona State University, Associate Professor of Chemistry (1/1/08 - present) Chercheur associé (CNRS), Institut de Biologie Physico-Chimique, Paris (8/15/07-7/20/08) and Fulbright

  12. A z ∼ 5.7 Lyα emission line with an ultrabroad red wing

    SciTech Connect (OSTI)

    Yang, Huan; Wang, JunXian; Zheng, Zhen-Ya; Malhotra, Sangeeta; Rhoads, James E.; Infante, Leopoldo E-mail: jxw@mail.ustc.edu.cn E-mail: smalhotr@asu.edu E-mail: linfante@astro.puc.cl

    2014-03-20

    Using the Lyα emission line as a tracer of high-redshift, star-forming galaxies, hundreds of Lyα emission line galaxies (LAEs) at z > 5 have been detected. These LAEs are considered to be low-mass young galaxies, critical to the re-ionization of the universe and the metal enrichment of the circumgalactic medium (CGM) and the intergalactic medium (IGM). It is assumed that outflows in LAEs can help both ionizing photons and Lyα photons escape from galaxies. However, we still know little about the outflows in high-redshift LAEs due to observational difficulties, especially at redshift >5. Models of Lyα radiative transfer predict asymmetric Lyα line profiles with broad red wings in LAEs with outflows. Here, we report a z ∼ 5.7 Lyα emission line with a broad red wing extending to >1000 km s{sup –1} relative to the peak of Lyα line, which has been detected in only a couple of z > 5 LAEs until now. If the broad red wing is ascribed to gas outflow instead of active galactic nucleus activity, the outflow velocity could be larger than the escape velocity (∼500 km s{sup –1}) of a typical halo mass of z ∼ 5.7 LAEs, which is consistent with the idea that outflows in LAEs disperse metals to CGM and IGM.

  13. The red-cockaded woodpecker on the Savannah River Site: Aspects of reproductive success.

    SciTech Connect (OSTI)

    Johnston, Peter A.; Imm, Donald, W.; Jarvis, William L.

    2004-12-31

    Red-cockaded woodpecker; Road to Recovery. Proceedings of the 4th Red-cockaded woodpecker Symposium. Ralph Costa and Susan J. Daniels, eds. Savannah, Georgia. January, 2003. Chapter 5. Status and Trends of Populations. Pp 224-229. Abstract: The red-cockaded woodpecker (Picoides borealis) population on the Savannah River Site has been closely monitored and studied over the last 17 years. In 1985, the USDA Forest Service Southern Research Station was given responsibility to study and manage this population in an effort to prevent its extirpation. In December 1985, there were only 4 individuals on the site: 1 pair and 2 solitary males. The population had increased to a total of 175 individuals in 42 active clusters in 2002. Although this represents a very successful recovery effort, there has been substantial annual variation in nesting survival from banding to fledging. Data were analyzed to more completely understand the factors affecting reproduction. No significant effects of age of the breeding male and female, years paired, number of helpers, habitat quality, number of nestings, and time of nest initiation were found when comparing reproductive success in 117 nesting attempts from 1999 to 2002. However, the number of neighboring groups had a direct effect on mortality rates, possibly demonstrating the importance of cluster spacing.

  14. Aleph Field Solver Challenge Problem Results Summary.

    SciTech Connect (OSTI)

    Hooper, Russell; Moore, Stan Gerald

    2015-01-01

    Aleph models continuum electrostatic and steady and transient thermal fields using a finite-element method. Much work has gone into expanding the core solver capability to support enriched mod- eling consisting of multiple interacting fields, special boundary conditions and two-way interfacial coupling with particles modeled using Aleph's complementary particle-in-cell capability. This report provides quantitative evidence for correct implementation of Aleph's field solver via order- of-convergence assessments on a collection of problems of increasing complexity. It is intended to provide Aleph with a pedigree and to establish a basis for confidence in results for more challeng- ing problems important to Sandia's mission that Aleph was specifically designed to address.

  15. Heavy crudes, stocks pose desalting problems

    SciTech Connect (OSTI)

    Bartley, D.

    1982-02-02

    The design of electrostatic desalters for crudes lighter than 30 API is well established and is no longer considered a problem. However, since 1970, the number of desalting applications involving heavy crudes (less than 20 API), syncrudes, and residual fuels has increased markedly. These stocks present unique problems that require additional design considerations. All produced crude oils, including synthetic crude from shale, tar sands, and coal liquefaction, contain impurities that adversely affect production and refining processes, the equipment used in these processes, and the final products. The most common of these impurities are water, salt, solids, metals, and sulfur. The desalting process consists of (1) adding water with a low salt content (preferably fresh) to the feedstock; (2) adequately mixing this added water with the feedstock, which already contains some quantities of salty water, sediment, and/or crystalline salt; and (3) extracting as much water as possible from the feedstock.

  16. Scalable Adaptive Multilevel Solvers for Multiphysics Problems

    SciTech Connect (OSTI)

    Xu, Jinchao

    2014-12-01

    In this project, we investigated adaptive, parallel, and multilevel methods for numerical modeling of various real-world applications, including Magnetohydrodynamics (MHD), complex fluids, Electromagnetism, Navier-Stokes equations, and reservoir simulation. First, we have designed improved mathematical models and numerical discretizaitons for viscoelastic fluids and MHD. Second, we have derived new a posteriori error estimators and extended the applicability of adaptivity to various problems. Third, we have developed multilevel solvers for solving scalar partial differential equations (PDEs) as well as coupled systems of PDEs, especially on unstructured grids. Moreover, we have integrated the study between adaptive method and multilevel methods, and made significant efforts and advances in adaptive multilevel methods of the multi-physics problems.

  17. Are shorted pipeline casings a problem

    SciTech Connect (OSTI)

    Gibson, W.F. )

    1994-11-01

    The pipeline industry has many road and railroad crossings with casings which have been in service for more than 50 years without exhibiting any major problems, regardless of whether the casing is shorted to or isolated from the carrier pipe. The use of smart pigging and continual visual inspection when retrieving a cased pipeline segment have shown that whether shorted or isolated, casings have no significant bearing on the presence or absence of corrosion on the carrier pipe.

  18. Ergonomics problems and solutions in biotechnology laboratories

    SciTech Connect (OSTI)

    Coward, T.W.; Stengel, J.W.; Fellingham-Gilbert, P.

    1995-03-01

    The multi-functional successful ergonomics program currently implemented at Lawrence Livermore National Laboratory (LLNL) will be presented with special emphasis on recent findings in the Biotechnology laboratory environment. In addition to a discussion of more traditional computer-related repetitive stress injuries and associated statistics, the presentation will cover identification of ergonomic problems in laboratory functions such as pipetting, radiation shielding, and microscope work. Techniques to alleviate symptoms and prevent future injuries will be presented.

  19. Diabaticity of nuclear motion: problems and perspectives

    SciTech Connect (OSTI)

    Nazarewicz, W [Joint Inst. for Heavy Ion Research, Oak Ridge, TN (United States)] [Joint Inst. for Heavy Ion Research, Oak Ridge, TN (United States)

    1992-12-31

    The assumption of adiabatic motion lies in foundations of many models of nuclear collective motion. To what extend can nuclear modes be treated adiabatically? Due to the richness and complexity of the nuclear many-body problem there is no unique answer to this question. The challenges of nuclear collective dynamics invite exciting interactions between several areas of physics such as nuclear structure, field theory, nonlinear dynamics, transport theory, and quantum chaos.

  20. CMI Grand Challenge Problems | Critical Materials Institute

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    CMI Grand Challenge Problems Time is the biggest issue. Materials typically become critical in a matter of months, but solutions take years or decades to develop and implement. Our first two grand challenges address this discrepancy. Anticipating Which Materials May Go Critical In an ideal world, users of materials would anticipate supply-chain disruptions before they occur. They would undertake activities to manage the risks of disruption, including R&D to diversify and increase supplies or

  1. RELAP5-3D User Problems

    SciTech Connect (OSTI)

    Riemke, Richard Allan

    2001-09-01

    The Reactor Excursion and Leak Analysis Program with 3D capability1 (RELAP5-3D) is a reactor system analysis code that has been developed at the Idaho National Engineering and Environmental Laboratory (INEEL) for the U. S. Department of Energy (DOE). The 3D capability in RELAP5-3D includes 3D hydrodynamics2 and 3D neutron kinetics3,4. Assessment, verification, and validation of the 3D capability in RELAP5-3D is discussed in the literature5,6,7,8,9. Additional assessment, verification, and validation of the 3D capability of RELAP5-3D will be presented in other papers in this users seminar. As with any software, user problems occur. User problems usually fall into the categories of input processing failure, code execution failure, restart/renodalization failure, unphysical result, and installation. This presentation will discuss some of the more generic user problems that have been reported on RELAP5-3D as well as their resolution.

  2. RELAP5-3D User Problems

    SciTech Connect (OSTI)

    Riemke, Richard Allan

    2002-09-01

    The Reactor Excursion and Leak Analysis Program with 3D capability1 (RELAP5-3D) is a reactor system analysis code that has been developed at the Idaho National Engineering and Environmental Laboratory (INEEL) for the U. S. Department of Energy (DOE). The 3D capability in RELAP5-3D includes 3D hydrodynamics2 and 3D neutron kinetics3,4. Assessment, verification, and validation of the 3D capability in RELAP5-3D is discussed in the literature5,6,7,8,9,10. Additional assessment, verification, and validation of the 3D capability of RELAP5-3D will be presented in other papers in this users seminar. As with any software, user problems occur. User problems usually fall into the categories of input processing failure, code execution failure, restart/renodalization failure, unphysical result, and installation. This presentation will discuss some of the more generic user problems that have been reported on RELAP5-3D as well as their resolution.

  3. Red emission phosphor for real-time skin dosimeter for fluoroscopy and interventional radiology

    SciTech Connect (OSTI)

    Nakamura, Masaaki Chida, Koichi; Zuguchi, Masayuki

    2014-10-15

    Purpose: There are no effective real-time direct skin dosimeters for interventional radiology. Such a scintillation dosimeter would be available if there was a suitable red emission phosphor in the medical x-ray range, since the silicon photodiode is a highly efficient device for red light. However, it is unknown whether there is a suitable red emission phosphor. The purpose of this study is to find a suitable red emission phosphor that can be used in x-ray dosimeters. Methods: Five kinds of phosphors which emit red light when irradiated with electron beams or ultraviolet rays in practical devices were chosen. For the brightness measurement, phosphor was put into transparent plastic cells or coated onto plastic sheets. The phosphors were irradiated with medical range x-rays [60–120 kV(peak), maximum dose rate of 160 mGy min{sup −1}], and the emission was measured by a luminance meter. Several characteristics, such as brightness, dose rate dependence, tube voltage dependence, and brightness stability, were investigated. Results: The luminescence of Y V O{sub 4}:Eu, (Y,Gd,Eu) BO{sub 3}, and Y{sub 2}O{sub 3}:Eu significantly deteriorated by 5%–10% when irradiated with continuous 2 Gy x-rays. The 0.5MgF{sub 2}⋅3.5MgO⋅GeO{sub 2}:Mn phosphor did not emit enough. Only the Y{sub 2}O{sub 2}S:Eu,Sm phosphor had hardly any brightness deterioration, and it had a linear relationship so that the x-ray dose rate could be determined from the brightness with sufficient accuracy. For the tube voltage dependence of the Y{sub 2}O{sub 2}S:Eu,Sm phosphor, the brightness per unit dose rate with 120 kV(peak) x-rays was 30% higher than that with 60 kV(peak) x-rays. Conclusions: Five kinds of phosphors were chosen as an x-ray scintillator for a real-time direct skin dosimeter. The Y V O{sub 4}:Eu, (Y,Gd,Eu)BO{sub 3}, and Y{sub 2}O{sub 3}:Eu phosphors had brightness deterioration caused by the x-rays. Only the Y{sub 2}O{sub 2}S:Eu,Sm phosphor had hardly any brightness deterioration

  4. T-563: Red Hat Directory Server Bugs Let Local Users Gain Elevated Privileges and Remote and Local Users Deny Service

    Broader source: Energy.gov [DOE]

    Several vulnerabilities were reported in Red Hat Directory Server. A local user can obtain elevated privileges on the target system. A remote user can cause denial of service conditions. A local user can cause denial of service conditions.

  5. Amplifying the Red-Emission of Upconverting Nanoparticles for Biocompatible Clinically Used Prodrug-Induced Photodynamic Therapy

    SciTech Connect (OSTI)

    Punjabi, Amol; Wu, Xiang; Tokatli-Apollon, Amira; El-Rifai, Mahmoud; Lee, Hyungseok; Zhang, Yuanwei; Wang, Chao; Liu, Zhuang; Chan, Emory M.; Duan, Chunying; Han, Gang

    2014-09-25

    A class of biocompatible upconverting nanoparticles (UCNPs) with largely amplified red-emissions was developed. The optimal UCNP shows a high absolute upconversion quantum yield of 3.2% in red-emission, which is 15-fold stronger than the known optimal β-phase core/shell UCNPs. When conjugated to aminolevulinic acid, a clinically used photodynamic therapy (PDT) prodrug, significant PDT effect in tumor was demonstrated in a deep-tissue (>1.2 cm) setting in vivo at a biocompatible laser power density. Furthermore, we show that our UCNP–PDT system with NIR irradiation outperforms clinically used red light irradiation in a deep tumor setting in vivo. This study marks a major step forward in photodynamic therapy utilizing UCNPs to effectively access deep-set tumors.Lastly, it also provides an opportunity for the wide application of upconverting red radiation in photonics and biophotonics.

  6. Effects of storage on irradiated red blood cells: An in-vitro and in-vivo study. Master's thesis

    SciTech Connect (OSTI)

    Knoll, S.E.

    1991-08-01

    Irradiation of red blood cell units has recently become a topic of special concern as the result of increasing reports of graft versus host disease in immunocompetent blood transfusion recipients. This study was designed to evaluate the potassium elevations observed in stored irradiated red blood cells and to evaluate the in vivo survival of stored irradiated red blood cells using a dog model. In the in vitro study ten units of human CPDA-1 packed red blood cells were made into paired aliquots; one aliquot of each pair was irradiated with 3000 rads of gamma radiation and the potassium content measured at points throughout 35 days of storage. A significant increase in potassium levels in the irradiated aliquots was observed from the first day after irradiation and continued through the entire storage period.

  7. Amplifying the Red-Emission of Upconverting Nanoparticles for Biocompatible Clinically Used Prodrug-Induced Photodynamic Therapy

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Punjabi, Amol; Wu, Xiang; Tokatli-Apollon, Amira; El-Rifai, Mahmoud; Lee, Hyungseok; Zhang, Yuanwei; Wang, Chao; Liu, Zhuang; Chan, Emory M.; Duan, Chunying; et al

    2014-09-25

    A class of biocompatible upconverting nanoparticles (UCNPs) with largely amplified red-emissions was developed. The optimal UCNP shows a high absolute upconversion quantum yield of 3.2% in red-emission, which is 15-fold stronger than the known optimal β-phase core/shell UCNPs. When conjugated to aminolevulinic acid, a clinically used photodynamic therapy (PDT) prodrug, significant PDT effect in tumor was demonstrated in a deep-tissue (>1.2 cm) setting in vivo at a biocompatible laser power density. Furthermore, we show that our UCNP–PDT system with NIR irradiation outperforms clinically used red light irradiation in a deep tumor setting in vivo. This study marks a major stepmore » forward in photodynamic therapy utilizing UCNPs to effectively access deep-set tumors.Lastly, it also provides an opportunity for the wide application of upconverting red radiation in photonics and biophotonics.« less

  8. Exact Overlaps in the Kondo Problem (Journal Article) | DOE PAGES

    Office of Scientific and Technical Information (OSTI)

    Exact Overlaps in the Kondo Problem Prev Next Title: Exact Overlaps in the Kondo Problem Authors: Lukyanov, Sergei L. ; Saleur, Hubert ; Jacobsen, Jesper L. ; Vasseur, Romain ...

  9. Approaching Problems in Particle and Nuclear Physics with Time...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Approaching Problems in Particle and Nuclear Physics with Time-Dependent Quantum Mechanics (Wednesday, Jan 20) Approaching Problems in Particle and Nuclear Physics with...

  10. Statistics Show Bearing Problems Cause the Majority of Wind Turbine...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Statistics Show Bearing Problems Cause the Majority of Wind Turbine Gearbox Failures Statistics Show Bearing Problems Cause the Majority of Wind Turbine Gearbox Failures September ...

  11. Solving a Class of Nonlinear Eigenvalue Problems by Newton's...

    Office of Scientific and Technical Information (OSTI)

    We examine the possibility of using the standard Newton's method for solving a class of ... NONLINEAR PROBLEMS nonlinear eigenvalue problem, Newton's method Word Cloud More Like ...

  12. Problems with propagation and time evolution in f ( T ) gravity...

    Office of Scientific and Technical Information (OSTI)

    Problems with propagation and time evolution in f ( T ) gravity Citation Details In-Document Search Title: Problems with propagation and time evolution in f ( T ) gravity Authors: ...

  13. Red Sky

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    National Solar Thermal Test Facility Nuclear ... Climate & Earth Systems Climate Measurement & Modeling ... Tribal Energy Program Intellectual Property Current EC ...

  14. Organic solution-processible electroluminescent molecular glasses for non-doped standard red OLEDs with electrically stable chromaticity

    SciTech Connect (OSTI)

    Bi, Xiaoman; Zuo, Weiwei; Liu, Yingliang Zhang, Zhenru; Zeng, Cen; Xu, Shengang; Cao, Shaokui

    2015-10-15

    Highlights: • The D–A–D electroluminescent molecular glasses are synthesized. • Non-doped red electroluminescent film is fabricated by spin-coating. • Red OLED shows stable wavelength, luminous efficiency and chromaticity. • CIE1931 coordinate is in accord with standard red light in PAL system. - Abstract: Organic light-emitting molecular glasses (OEMGs) are synthesized through the introduction of nonplanar donor and branched aliphatic chain into electroluminescent emitters. The target OEMGs are characterized by {sup 1}H NMR, {sup 13}C NMR, IR, UV–vis and fluorescent spectra as well as elemental analysis, TG and DSC. The results indicated that the optical, electrochemical and electroluminescent properties of OEMGs are adjusted successfully by the replacement of electron-donating group. The non-doped OLED device with a standard red electroluminescent emission is achieved by spin-coating the THF solution of OEMG with a triphenylamine moiety. This non-doped red OLED device takes on an electrically stable electroluminescent performance, including the stable maximum electroluminescent wavelength of 640 nm, the stable luminous efficiency of 2.4 cd/A and the stable CIE1931 coordinate of (x, y) = (0.64, 0.35), which is basically in accord with the CIE1931 coordinate (x, y) = (0.64, 0.33) of standard red light in PAL system.

  15. CrowdPhase: crowdsourcing the phase problem

    SciTech Connect (OSTI)

    Jorda, Julien; Sawaya, Michael R.; Yeates, Todd O.

    2014-06-01

    The idea of attacking the phase problem by crowdsourcing is introduced. Using an interactive, multi-player, web-based system, participants work simultaneously to select phase sets that correspond to better electron-density maps in order to solve low-resolution phasing problems. The human mind innately excels at some complex tasks that are difficult to solve using computers alone. For complex problems amenable to parallelization, strategies can be developed to exploit human intelligence in a collective form: such approaches are sometimes referred to as ‘crowdsourcing’. Here, a first attempt at a crowdsourced approach for low-resolution ab initio phasing in macromolecular crystallography is proposed. A collaborative online game named CrowdPhase was designed, which relies on a human-powered genetic algorithm, where players control the selection mechanism during the evolutionary process. The algorithm starts from a population of ‘individuals’, each with a random genetic makeup, in this case a map prepared from a random set of phases, and tries to cause the population to evolve towards individuals with better phases based on Darwinian survival of the fittest. Players apply their pattern-recognition capabilities to evaluate the electron-density maps generated from these sets of phases and to select the fittest individuals. A user-friendly interface, a training stage and a competitive scoring system foster a network of well trained players who can guide the genetic algorithm towards better solutions from generation to generation via gameplay. CrowdPhase was applied to two synthetic low-resolution phasing puzzles and it was shown that players could successfully obtain phase sets in the 30° phase error range and corresponding molecular envelopes showing agreement with the low-resolution models. The successful preliminary studies suggest that with further development the crowdsourcing approach could fill a gap in current crystallographic methods by making it

  16. Studies in nonlinear problems of energy

    SciTech Connect (OSTI)

    Matkowsky, B.J.

    1992-07-01

    Emphasis has been on combustion and flame propagation. The research program was on modeling, analysis and computation of combustion phenomena, with emphasis on transition from laminar to turbulent combustion. Nonlinear dynamics and pattern formation were investigated in the transition. Stability of combustion waves, and transitions to complex waves are described. Combustion waves possess large activation energies, so that chemical reactions are significant only in thin layers, or reaction zones. In limit of infinite activation energy, the zones shrink to moving surfaces, (fronts) which must be found during the analysis, so that (moving free boundary problems). The studies are carried out for limiting case with fronts, while the numerical studies are carried out for finite, though large, activation energy. Accurate resolution of the solution in the reaction zones is essential, otherwise false predictions of dynamics are possible. Since the the reaction zones move, adaptive pseudo-spectral methods were developed. The approach is based on a synergism of analytical and computational methods. The numerical computations build on and extend the analytical information. Furthermore, analytical solutions serve as benchmarks for testing the accuracy of the computation. Finally, ideas from analysis (singular perturbation theory) have induced new approaches to computations. The computational results suggest new analysis to be considered. Among the recent interesting results, was spatio-temporal chaos in combustion. One goal is extension of the adaptive pseudo-spectral methods to adaptive domain decomposition methods. Efforts have begun to develop such methods for problems with multiple reaction zones, corresponding to problems with more complex, and more realistic chemistry. Other topics included stochastics, oscillators, Rysteretic Josephson junctions, DC SQUID, Markov jumps, laser with saturable absorber, chemical physics, Brownian movement, combustion synthesis, etc.

  17. PCI Capability Development and Challenge Problem Progress

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    6-000 PCI Capability Development and Challenge Problem Progress Joe Rashid 1 , Brian D. Wirth 2 , Rich Williamson 3 1 ANATECH Corp 2 University of Tennessee 3 Idaho National Laboratory 2 CASL-U-2016-1086-000 Outline * State of the art of PCI & Fuel Performance Codes (FPCs) * FPCs compatibility with Utilities needs - what are the gaps? Can BISON close these gaps? * PCI Capability Development: BISON progress to-date * BISON as a Phase-2 product - will it fulfill its promise? 3

  18. Analytical solutions to matrix diffusion problems

    SciTech Connect (OSTI)

    Keklinen, Pekka

    2014-10-06

    We report an analytical method to solve in a few cases of practical interest the equations which have traditionally been proposed for the matrix diffusion problem. In matrix diffusion, elements dissolved in ground water can penetrate the porous rock surronuding the advective flow paths. In the context of radioactive waste repositories this phenomenon provides a mechanism by which the area of rock surface in contact with advecting elements is greatly enhanced, and can thus be an important delay mechanism. The cases solved are relevant for laboratory as well for in situ experiments. Solutions are given as integral representations well suited for easy numerical solution.

  19. THE MID-INFRARED AND NEAR-ULTRAVIOLET EXCESS EMISSIONS OF QUIESCENT GALAXIES ON THE RED SEQUENCE

    SciTech Connect (OSTI)

    Ko, Jongwan; Lee, Jong Chul; Hwang, Ho Seong; Sohn, Young-Jong

    2013-04-10

    We study the mid-infrared (IR) and near-ultraviolet (UV) excess emissions of spectroscopically selected quiescent galaxies on the optical red sequence. We use the Wide-field Infrared Survey Explorer mid-IR and Galaxy Evolution Explorer near-UV data for a spectroscopic sample of galaxies in the Sloan Digital Sky Survey Data Release 7 to study the possible connection between quiescent red-sequence galaxies with and without mid-IR/near-UV excess. Among 648 12 {mu}m detected quiescent red-sequence galaxies without H{alpha} emission, 26% and 55% show near-UV and mid-IR excess emissions, respectively. When we consider only bright (M{sub r} < -21.5) galaxies with an early-type morphology, the fraction of galaxies with recent star formation is still 39%. The quiescent red-sequence galaxies with mid-IR and near-UV excess emissions are optically fainter and have slightly smaller D{sub n} 4000 than those without mid-IR and near-UV excess emissions. We also find that mid-IR weighted mean stellar ages of quiescent red-sequence galaxies with mid-IR excess are larger than those with near-UV excess, and smaller than those without mid-IR and near-UV excess. The environmental dependence of the fraction of quiescent red-sequence galaxies with mid-IR and near-UV excess seems strong even though the trends of quiescent red-sequence galaxies with near-UV excess differ from those with mid-IR excess. These results indicate that the recent star formation traced by near-UV ({approx}< 1 Gyr) and mid-IR ({approx}< 2 Gyr) excess is not negligible among nearby, quiescent, red, early-type galaxies. We suggest a possible evolutionary scenario of quiescent red-sequence galaxies from quiescent red-sequence galaxies with near-UV excess to those with mid-IR excess to those without near-UV and mid-IR excess.

  20. RED GIANTS IN ECLIPSING BINARY AND MULTIPLE-STAR SYSTEMS: MODELING AND ASTEROSEISMIC ANALYSIS OF 70 CANDIDATES FROM KEPLER DATA

    SciTech Connect (OSTI)

    Gaulme, P.; McKeever, J.; Rawls, M. L.; Jackiewicz, J.; Mosser, B.; Guzik, J. A.

    2013-04-10

    Red giant stars are proving to be an incredible source of information for testing models of stellar evolution, as asteroseismology has opened up a window into their interiors. Such insights are a direct result of the unprecedented data from space missions CoRoT and Kepler as well as recent theoretical advances. Eclipsing binaries are also fundamental astrophysical objects, and when coupled with asteroseismology, binaries provide two independent methods to obtain masses and radii and exciting opportunities to develop highly constrained stellar models. The possibility of discovering pulsating red giants in eclipsing binary systems is therefore an important goal that could potentially offer very robust characterization of these systems. Until recently, only one case has been discovered with Kepler. We cross-correlate the detected red giant and eclipsing-binary catalogs from Kepler data to find possible candidate systems. Light-curve modeling and mean properties measured from asteroseismology are combined to yield specific measurements of periods, masses, radii, temperatures, eclipse timing variations, core rotation rates, and red giant evolutionary state. After using three different techniques to eliminate false positives, out of the 70 systems common to the red giant and eclipsing-binary catalogs we find 13 strong candidates (12 previously unknown) to be eclipsing binaries, one to be a non-eclipsing binary with tidally induced oscillations, and 10 more to be hierarchical triple systems, all of which include a pulsating red giant. The systems span a range of orbital eccentricities, periods, and spectral types F, G, K, and M for the companion of the red giant. One case even suggests an eclipsing binary composed of two red giant stars and another of a red giant with a {delta}-Scuti star. The discovery of multiple pulsating red giants in eclipsing binaries provides an exciting test bed for precise astrophysical modeling, and follow-up spectroscopic observations of many

  1. Public problems: Still waiting on the marketplace for solutions

    SciTech Connect (OSTI)

    Gover, J.; Carayannis, E.; Huray, P.

    1997-10-01

    This report addresses the need for government sponsored R and D to address real public problems. The motivation is that a public benefit of the money spent must be demonstrated. The areas identified as not having appropriate attention resulting in unmet public needs include healthcare cost, cost and benefits of regulations, infrastructure problems, defense spending misaligned with foreign policy objectives, the crime problem, energy impact on the environment, the education problem, low productivity growth industry sectors, the income distribution problem, the aging problem, the propagation of disease and policy changes needed to address the solution of these problems.

  2. DYNA3D Non-reflecting Boundary Conditions - Test Problems

    SciTech Connect (OSTI)

    Zywicz, E

    2006-09-28

    Two verification problems were developed to test non-reflecting boundary segments in DYNA3D (Whirley and Engelmann, 1993). The problems simulate 1-D wave propagation in a semi-infinite rod using a finite length rod and non-reflecting boundary conditions. One problem examines pure pressure wave propagation, and the other problem explores pure shear wave propagation. In both problems the non-reflecting boundary segments yield results that differ only slightly (less than 6%) during a short duration from their corresponding theoretical solutions. The errors appear to be due to the inability to generate a true step-function compressive wave in the pressure wave propagation problem and due to segment integration inaccuracies in the shear wave propagation problem. These problems serve as verification problems and as regression test problems for DYNA3D.

  3. Engineering problems of tandem-mirror reactors

    SciTech Connect (OSTI)

    Moir, R.W.; Barr, W.L.; Boghosian, B.M.

    1981-10-22

    We have completed a comparative evaluation of several end plug configurations for tandem mirror fusion reactors with thermal barriers. The axi-cell configuration has been selected for further study and will be the basis for a detailed conceptual design study to be carried out over the next two years. The axi-cell end plug has a simple mirror cell produced by two circular coils followed by a transition coil and a yin-yang pair, which provides for MHD stability. This paper discusses some of the many engineering problems facing the designer. We estimated the direct cost to be 2$/W/sub e/. Assuming total (direct and indirect) costs to be twice this number, we need to reduce total costs by factors between 1.7 and 2.3 to compete with future LWRs levelized cost of electricity. These reductions may be possible by designing magnets producing over 20T made possible by use of combinations of superconducting and normal conducting coils as well as improvements in performance and cost of neutral beam and microwave power systems. Scientific and technological understanding and innovation are needed in the area of thermal barrier pumping - a process by which unwanted particles are removed (pumped) from certain regions of velocity and real space in the end plug. Removal of exhaust fuel ions, fusion ash and impurities by action of a halo plasma and plasma dump in the mirror end region is another challenging engineering problem discussed in this paper.

  4. The PHEV Charging Infrastructure Planning (PCIP) Problem

    SciTech Connect (OSTI)

    Dashora, Yogesh; Barnes, J. Wesley; Pillai, Rekha S; Combs, Todd E; Hilliard, Michael R; Chinthavali, Madhu Sudhan

    2010-01-01

    Increasing debates over a gasoline independent future and the reduction of greenhouse gas (GHG) emissions has led to a surge in plug-in hybrid electric vehicles (PHEVs) being developed around the world. The majority of PHEV related research has been directed at improving engine and battery operations, studying future PHEV impacts on the grid, and projecting future PHEV charging infrastructure requirements. Due to the limited all-electric range of PHEVs, a daytime PHEV charging infrastructure will be required for most PHEV daily usage. In this paper, for the first time, we present a mixed integer mathematical programming model to solve the PHEV charging infrastructure planning (PCIP) problem for organizations with thousands of people working within a defined geographic location and parking lots well suited to charging station installations. Our case study, based on the Oak Ridge National Laboratory (ORNL) campus, produced encouraging results, indicates the viability of the modeling approach and substantiates the importance of considering both employee convenience and appropriate grid connections in the PCIP problem.

  5. Modeling a Typical Winter-time Dust Event over the Arabian Peninsula and the Red Sea

    SciTech Connect (OSTI)

    Kalenderski, S.; Stenchikov, G.; Zhao, Chun

    2013-02-20

    We used WRF-Chem, a regional meteorological model coupled with an aerosol-chemistry component, to simulate various aspects of the dust phenomena over the Arabian Peninsula and Red Sea during a typical winter-time dust event that occurred in January 2009. The model predicted that the total amount of emitted dust was 18.3 Tg for the entire dust outburst period and that the two maximum daily rates were ~2.4 Tg/day and ~1.5 Tg/day, corresponding to two periods with the highest aerosol optical depth that were well captured by ground- and satellite-based observations. The model predicted that the dust plume was thick, extensive, and mixed in a deep boundary layer at an altitude of 3-4 km. Its spatial distribution was modeled to be consistent with typical spatial patterns of dust emissions. We utilized MODIS-Aqua and Solar Village AERONET measurements of the aerosol optical depth (AOD) to evaluate the radiative impact of aerosols. Our results clearly indicated that the presence of dust particles in the atmosphere caused a significant reduction in the amount of solar radiation reaching the surface during the dust event. We also found that dust aerosols have significant impact on the energy and nutrient balances of the Red Sea. Our results showed that the simulated cooling under the dust plume reached 100 W/m2, which could have profound effects on both the sea surface temperature and circulation. Further analysis of dust generation and its spatial and temporal variability is extremely important for future projections and for better understanding of the climate and ecological history of the Red Sea.

  6. Ogaden Basin subsidence history: Another key to the Red Sea-Gulf of Aden tectonic puzzle

    SciTech Connect (OSTI)

    Pigott, J.D.; Neese, D.; Carsten, G.

    1995-08-01

    Previous work has attempted to understand the tectonic evolution of the Red Sea-Gulf of Aden region through a focus upon plate kinematics and reconstruction of plate interactions in a two dimensional sense. A significant complement to the three dimensional puzzle can be derived from a critical examination of the vertical component, tectonic subsidence analysis. By removing the isostatic contributions of sediment loading and unloading, and fluctuations in sea level, the remaining thermal-mechanical contribution to a basin`s subsidence can be determined. Such an analysis of several Ogaden Basin wells reveals multiple pulses of tectonic subsidence and uplift which correspond to far-field tectonic activities in the Red Sea and Gulf of Aden. One of the more dramatic is a Jurassic tectonic pulse circa 145-130 m.a., and a later extensional event which correlates to a major subsidence event ubiquitous through-out the Gulf of Aden, related to Gondwana Land breakup activities. Tectonic uplift during the Tertiary coincides with early Red Sea rifting episodes. Such activities suggest the Ogaden Basin has been a relatively stable East African cratonic basin, but with heating-extension events related to nearby plate interactions. In terms of hydrocarbon generation, the use of steady state present day geothermal gradients, coupled with subsidence analysis shows that potential Paleozoic and Mesozoic source rocks initiated generation as early as the Jurassic. The generating potential of Paleozoic source rocks would only be exacerbated by later heating events. Furthermore, cooling and tectonic uplift during the Tertiary would tend to arrest on-going hydrocarbon generation for Jurassic source rocks in the Ogaden area.

  7. OBSERVABLE SIGNATURES OF PLANET ACCRETION IN RED GIANT STARS. I. RAPID ROTATION AND LIGHT ELEMENT REPLENISHMENT

    SciTech Connect (OSTI)

    Carlberg, Joleen K.; Cunha, Katia; Smith, Verne V.; Majewski, Steven R. E-mail: srm4n@virginia.edu E-mail: cunha@noao.edu

    2012-10-01

    The orbital angular momentum of a close-orbiting giant planet can be sufficiently large that, if transferred to the envelope of the host star during the red giant branch (RGB) evolution, it can spin-up the star's rotation to unusually large speeds. This spin-up mechanism is one possible explanation for the rapid rotators detected among the population of generally slow-rotating red giant stars. These rapid rotators thus comprise a unique stellar sample suitable for searching for signatures of planet accretion in the form of unusual stellar abundances due to the dissemination of the accreted planet in the stellar envelope. In this study, we look for signatures of replenishment in the Li abundances and (to a lesser extent) {sup 12}C/{sup 13}C, which are both normally lowered during RGB evolution. Accurate abundances were measured from high signal-to-noise echelle spectra for samples of both slow and rapid rotator red giant stars. We find that the rapid rotators are on average enriched in lithium compared to the slow rotators, but both groups of stars have identical distributions of {sup 12}C/{sup 13}C within our measurement precision. Both of these abundance results are consistent with the accretion of planets of only a few Jupiter masses. We also explore alternative scenarios for understanding the most Li-rich stars in our sample-particularly Li regeneration during various stages of stellar evolution. Finally, we find that our stellar samples show non-standard abundances even at early RGB stages, suggesting that initial protostellar Li abundances and {sup 12}C/{sup 13}C may be more variable than originally thought.

  8. Red light-emitting diodes based on InP/GaP quantum dots

    SciTech Connect (OSTI)

    Hatami, F.; Lordi, V.; Harris, J.S.; Kostial, H.; Masselink, W.T.

    2005-05-01

    The growth, fabrication, and device characterization of InP quantum-dot light-emitting diodes based on GaP are described and discussed. The diode structures are grown on gallium phosphide substrates using gas-source molecular-beam epitaxy and the active region of the diode consists of self-assembled InP quantum dots embedded in a GaP matrix. Red electroluminescence originating from direct band-gap emission from the InP quantum dots is observed at low temperatures.With increasing temperature, however, the emission line shifts to the longer wavelength. The emission light is measured to above room temperature.

  9. Kit for the rapid preparation of .sup.99m Tc red blood cells

    DOE Patents [OSTI]

    Richards, Powell; Smith, Terry D.

    1976-01-01

    A method and sample kit for the preparation of .sup.99m Tc-labeled red blood cells in a closed, sterile system. A partially evacuated tube, containing a freeze-dried stannous citrate formulation with heparin as an anticoagulant, allows whole blood to be automatically drawn from the patient. The radioisotope is added at the end of the labeling sequence to minimize operator exposure. Consistent 97% yields in 20 minutes are obtained with small blood samples. Freeze-dried kits have remained stable after five months.

  10. Project Reports for Red Lake Band of Chippewa Indians- 2005 Project

    Office of Energy Efficiency and Renewable Energy (EERE)

    Nearly 60% of the 1,621 housing units on the reservation lack adequate insulation, ventilation, and efficient and safe furnaces and appliances. The project will achieve the following objectives: (1) to enhance tribal member energy expertise for reducing tribal energy consumption and for implementing energy efficiency measures, (2) to increase the tribe's capacity to secure additional funding for energy conservation, including state-sponsored investments, and (3) to create significant energy savings in tribal homes and promote economic and environmental opportunities to sustain Red Lake.

  11. Permafrost problems as they affect gas pipelines (the frost heave problem)

    SciTech Connect (OSTI)

    Lipsett, G.B.

    1980-01-01

    The major problems associated with the construction of a large diameter gas pipeline in a permafrost region are outlined in this presentation. Data pertains to the design and construction of the Alaska Highway Gas Pipeline Project. One of the main problems is maintaining the permafrost in its frozen state. Large diameter pipelines operating at high capacity are heat generators. Therefore, it is necessary to refrigerate the gas to ensure that it remains below 0/sup 0/C at all points in the pipeline system. The pipeline also passes through unfrozen ground where the potential for frost heave exists. The conditions under which frost heave occurs are listed. The extent and location of potential frost heave problem areas must be determined and a frost heave prediction method must be established before construction begins. Another task involves development of design criteria for the pipeline/soil interaction analysis. Remedial methods for use during the operational phase are also discussed. (DMC)

  12. Current problems in plasma spray processing

    SciTech Connect (OSTI)

    Berndt, C.C.; Brindley, W.; Goland, A.N.; Herman, H.; Houck, D.L.; Jones, K.; Miller, R.A.; Neiser, R.; Riggs, W.; Sampath, S.; Smith, M.; Spanne, P.

    1991-12-31

    This detailed report summarizes 8 contributions from a thermal spray conference that was held in late 1991 at Brookhaven National Laboratory (Upton, Long Island, NY, USA). The subject of ``Plasma Spray Processing`` is presented under subject headings of Plasma-particle interactions, Deposit formation dynamics, Thermal properties of thermal barrier coatings, Mechanical properties of coatings, Feed stock materials, Porosity: An integrated approach, Manufacture of intermetallic coatings, and Synchrotron x-ray microtomographic methods for thermal spray materials. Each section is intended to present a concise statement of a specific practical and/or scientific problem, then describe current work that is being performed to investigate this area, and finally to suggest areas of research that may be fertile for future activity.

  13. Current problems in plasma spray processing

    SciTech Connect (OSTI)

    Berndt, C.C.; Brindley, W.; Goland, A.N.; Herman, H.; Houck, D.L.; Jones, K.; Miller, R.A.; Neiser, R.; Riggs, W.; Sampath, S.; Smith, M.; Spanne, P. . Thermal Spray Lab.)

    1991-01-01

    This detailed report summarizes 8 contributions from a thermal spray conference that was held in late 1991 at Brookhaven National Laboratory (Upton, Long Island, NY, USA). The subject of Plasma Spray Processing'' is presented under subject headings of Plasma-particle interactions, Deposit formation dynamics, Thermal properties of thermal barrier coatings, Mechanical properties of coatings, Feed stock materials, Porosity: An integrated approach, Manufacture of intermetallic coatings, and Synchrotron x-ray microtomographic methods for thermal spray materials. Each section is intended to present a concise statement of a specific practical and/or scientific problem, then describe current work that is being performed to investigate this area, and finally to suggest areas of research that may be fertile for future activity.

  14. Municipal solid waste (garbage): problems and benefits

    SciTech Connect (OSTI)

    Stillman, G.I.

    1983-05-01

    The average person in the USA generates from 3 1/2 to 7 lb of garbage/day. The combustible portion of garbage consists primarily of paper products, plastics, textiles, and wood. Problems connected with energy production from municipal solid waste (garbage), and the social, economic, and environmental factors associated with this technology are discussed. The methods for using garbage as a fuel for a combustion process are discussed. One method processes the garbage to produce a fuel that is superior to raw garbage, the other method of using garbage as a fuel is to burn it directly - the mass burning approach. The involvement of the Power Authority of the State of New York in garbage-to-energy technology is discussed.

  15. New tools attack Permian basin stimulation problems

    SciTech Connect (OSTI)

    Ely, J.W.; Schubarth, S.K.; Wolters, B.C.; Kromer, C. )

    1992-06-08

    This paper reports that profitable stimulation treatments in the Permian basin of the southwestern U.S. combine new tools with technology and fluids previously available. This paper reports that a wide selection of fracturing fluids and techniques needs to be considered to solve the varied problems associated with stimulating hydrocarbon reservoirs that are at diverse depths, temperatures, pressures, and lithologies. The Permian basin of West Texas and New Mexico is the most fertile ground in the U.S. for some of the newer stimulation technologies. In this basin, these new tools and techniques have been applied in many older producing areas that previously were treated with more conventional stimulation techniques, including acidizing and conventional fracturing procedures.

  16. Stochastic inverse problems: Models and metrics

    SciTech Connect (OSTI)

    Sabbagh, Elias H.; Sabbagh, Harold A.; Murphy, R. Kim; Aldrin, John C.; Annis, Charles; Knopp, Jeremy S.

    2015-03-31

    In past work, we introduced model-based inverse methods, and applied them to problems in which the anomaly could be reasonably modeled by simple canonical shapes, such as rectangular solids. In these cases the parameters to be inverted would be length, width and height, as well as the occasional probe lift-off or rotation. We are now developing a formulation that allows more flexibility in modeling complex flaws. The idea consists of expanding the flaw in a sequence of basis functions, and then solving for the expansion coefficients of this sequence, which are modeled as independent random variables, uniformly distributed over their range of values. There are a number of applications of such modeling: 1. Connected cracks and multiple half-moons, which we have noted in a POD set. Ideally we would like to distinguish connected cracks from one long shallow crack. 2. Cracks of irregular profile and shape which have appeared in cold work holes during bolt-hole eddy-current inspection. One side of such cracks is much deeper than other. 3. L or C shaped crack profiles at the surface, examples of which have been seen in bolt-hole cracks. By formulating problems in a stochastic sense, we are able to leverage the stochastic global optimization algorithms in NLSE, which is resident in VIC-3D®, to answer questions of global minimization and to compute confidence bounds using the sensitivity coefficient that we get from NLSE. We will also address the issue of surrogate functions which are used during the inversion process, and how they contribute to the quality of the estimation of the bounds.

  17. Effects of radio transmitters on the behavior of Red-headed Woodpeckers.

    SciTech Connect (OSTI)

    Vukovich, Mark; Kilgo, John, C.

    2009-05-01

    ABSTRACT. Previous studies have revealed that radio-transmitters may affect bird behaviors, including feeding rates, foraging behavior, vigilance, and preening behavior. In addition, depending on the method of attachment, transmitters can potentially affect the ability of cavity-nesting birds to use cavities. Our objective was to evaluate effects of transmitters on the behavior of and use of cavities byRed-headedWoodpeckers (Melanerpes erythrocephalus). Using backpack harnesses, we attached 2.1-g transmitter packages that averaged 3.1% of body weight (range = 2.53.6%) to Red-headed Woodpeckers. We observed both radio-tagged (N = 23) and nonradio-tagged (N = 28) woodpeckers and determined the percentage of time spent engaged in each of five behaviors: flight, foraging, perching, preening, and territorial behavior. We found no difference between the two groups in the percentage of time engaged in each behavior. In addition, we found that transmitters had no apparent effect on use of cavities for roosting by radio-tagged woodpeckers (N = 25).We conclude that backpack transmitters weighing less than 3.6% of body weight had no impact on either their behavior or their ability to use cavities.

  18. Electronic structure descriptor for the discovery of narrow-band red-emitting phosphors

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Wang, Zhenbin; Chu, Iek -Heng; Zhou, Fei; Ong, Shyue Ping

    2016-05-09

    Narrow-band red-emitting phosphors are a critical component of phosphor-converted light-emitting diodes for highly efficient illumination-grade lighting. In this work, we report the discovery of a quantitative descriptor for narrow-band Eu2+-activated emission identified through a comparison of the electronic structures of known narrow-band and broad-band phosphors. We find that a narrow emission bandwidth is characterized by a large splitting of more than 0.1 eV between the two highest Eu2+ 4f7 bands. By incorporating this descriptor in a high-throughput first-principles screening of 2259 nitride compounds, we identify five promising new nitride hosts for Eu2+-activated red-emitting phosphors that are predicted to exhibit goodmore » chemical stability, thermal quenching resistance, and quantum efficiency, as well as narrow-band emission. Lastly, our findings provide important insights into the emission characteristics of rare-earth activators in phosphor hosts and a general strategy to the discovery of phosphors with a desired emission peak and bandwidth.« less

  19. Adsorption of basic Red 46 using sea mango (Cerbera odollam) based activated carbon

    SciTech Connect (OSTI)

    Azmi, Nur Azira Iqlima; Zainudin, Nor Fauziah; Ali, Umi Fazara Md

    2015-05-15

    Sea mango or Cerbera Odollam is another source of carbonaceous material that can be found abundantly in Malaysia. In this research, it is used as a new agricultural source of activated carbon. Sea mango activated carbon was prepared by chemical activation using potassium hydroxide (KOH). The sea mango was soaked in KOH at impregnation ratio of 1:1 and followed by carbonization at temperature of 600°C for 1 hour. The sample was then characterized using Scanning Electron Microscope (SEM) for surface morphology, while Brunauer-Emmett-Teller (BET) was used to study the surface area. The result shown that sea mango activated carbon (SMAC) developed new pores on its surface and the BET surface area measured was 451.87 m{sup 2}/g. The SMAC performance was then tested for the removal of Basic Red 46 in batch process. The removal of Basic Red 46 (50 mg/L, natural pH, 0.1 g SMAC) was more than 99% in 15 minutes where it reached equilibrium in 30 minutes.

  20. INTELLIGENT COMPUTING SYSTEM FOR RESERVOIR ANALYSIS AND RISK ASSESSMENT OF THE RED RIVER FORMATION

    SciTech Connect (OSTI)

    Kenneth D. Luff

    2002-09-30

    Integrated software has been written that comprises the tool kit for the Intelligent Computing System (ICS). Luff Exploration Company is applying these tools for analysis of carbonate reservoirs in the southern Williston Basin. The integrated software programs are designed to be used by small team consisting of an engineer, geologist and geophysicist. The software tools are flexible and robust, allowing application in many environments for hydrocarbon reservoirs. Keystone elements of the software tools include clustering and neural-network techniques. The tools are used to transform seismic attribute data to reservoir characteristics such as storage (phi-h), probable oil-water contacts, structural depths and structural growth history. When these reservoir characteristics are combined with neural network or fuzzy logic solvers, they can provide a more complete description of the reservoir. This leads to better estimates of hydrocarbons in place, areal limits and potential for infill or step-out drilling. These tools were developed and tested using seismic, geologic and well data from the Red River Play in Bowman County, North Dakota and Harding County, South Dakota. The geologic setting for the Red River Formation is shallow-shelf carbonate at a depth from 8000 to 10,000 ft.

  1. A Photometric redshift galaxy catalog from the Red-Sequence Cluster Survey

    SciTech Connect (OSTI)

    Hsieh, Bau-Ching; Yee, H.K.C.; Lin, H.; Gladders, M.D.; /Carnegie Inst. Observ.

    2005-02-01

    The Red-Sequence Cluster Survey (RCS) provides a large and deep photometric catalog of galaxies in the z' and R{sub c} bands for 90 square degrees of sky, and supplemental V and B data have been obtained for 33.6 deg{sup 2}. They compile a photometric redshift catalog from these 4-band data by utilizing the empirical quadratic polynomial photometric redshift fitting technique in combination with CNOC2 and GOODS/HDF-N redshift data. The training set includes 4924 spectral redshifts. The resulting catalog contains more than one million galaxies with photometric redshifts < 1.5 and R{sub c} < 24, giving an rms scatter {delta}({Delta}z) < 0.06 within the redshift range 0.2 < z < 0.5 and {sigma}({Delta}z) < 0.11 for galaxies at 0.0 < z < 1.5. They describe the empirical quadratic polynomial photometric redshift fitting technique which they use to determine the relation between red-shift and photometry. A kd-tree algorithm is used to divide up the sample to improve the accuracy of the catalog. They also present a method for estimating the photometric redshift error for individual galaxies. They show that the redshift distribution of the sample is in excellent agreement with smaller and much deeper photometric and spectroscopic redshift surveys.

  2. An experimental study of the impact of location on the effectiveness of recruitment clusters for Red-cockaded Woodpeckers at the Savannah River Site.

    SciTech Connect (OSTI)

    Walters, Jeffrey, R.; Johnston, Peter, A.; Crowder, Larry, B.; Priddy, Jeffrey, A.

    2008-05-31

    An experimental study of the impact of location on the effectiveness of recruitment clusters for Red-Cockaded Woodpeckers at the Savannah River Site.

  3. A Lattice Boltzmann Fictitious Domain Method for Modeling Red Blood Cell Deformation and Multiple-Cell Hydrodynamic Interactions in Flow

    SciTech Connect (OSTI)

    Shi, Xing; Lin, Guang; Zou, Jianfeng; Fedosov, Dmitry A.

    2013-07-20

    To model red blood cell (RBC) deformation in flow, the recently developed LBM-DLM/FD method ([Shi and Lim, 2007)29], derived from the lattice Boltzmann method and the distributed Lagrange multiplier/fictitious domain methodthe fictitious domain method, is extended to employ the mesoscopic network model for simulations of red blood cell deformation. The flow is simulated by the lattice Boltzmann method with an external force, while the network model is used for modeling red blood cell deformation and the fluid-RBC interaction is enforced by the Lagrange multiplier. To validate parameters of the RBC network model, sThe stretching numerical tests on both coarse and fine meshes are performed and compared with the corresponding experimental data to validate the parameters of the RBC network model. In addition, RBC deformation in pipe flow and in shear flow is simulated, revealing the capacity of the current method for modeling RBC deformation in various flows.

  4. The light curve shapes as a key to resolving the origin of long secondary periods in red giant stars

    SciTech Connect (OSTI)

    Soszyński, I.; Udalski, A. E-mail: udalski@astrouw.edu.pl

    2014-06-10

    We present a study of Optical Gravitational Lensing Experiment light curves of red giant stars exhibiting long secondary periods (LSPs)—an enigmatic phenomenon commonly observed in stars on the upper red giant branch and asymptotic giant branch. We show that the light curves of LSP stars are essentially identical to those of the spotted variables with one dark spot on their photospheres. Such behavior can be explained by the presence of a dusty cloud orbiting the red giant together with a low-mass companion in a close, circular orbit. We argue that the binary scenario is in agreement with most of the observational properties of LSP variables, including non-sinusoidal shapes of their radial velocity curves.

  5. U-082: McAfee SaaS 'myCIOScn.dll' ActiveX Control Lets Remote...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Lets Remote Users Execute Arbitrary Code January 17, 2012 - 1:00pm Addthis PROBLEM: PHP Null Pointer Dereference in zendstrndup() Lets Local Users Deny Service PLATFORM: PHP...

  6. V-224: Google Chrome Multiple Vulnerabilities | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    4: Google Chrome Multiple Vulnerabilities V-224: Google Chrome Multiple Vulnerabilities August 22, 2013 - 1:05am Addthis PROBLEM: Multiple vulnerabilities have been reported in...

  7. V-121: Google Chrome Multiple Vulnerabilities | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    1: Google Chrome Multiple Vulnerabilities V-121: Google Chrome Multiple Vulnerabilities March 28, 2013 - 12:29am Addthis PROBLEM: Google Chrome Multiple Vulnerabilities PLATFORM:...

  8. V-207: Wireshark Multiple Denial of Service Vulnerabilities ...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    7: Wireshark Multiple Denial of Service Vulnerabilities V-207: Wireshark Multiple Denial of Service Vulnerabilities July 31, 2013 - 1:59am Addthis PROBLEM: Multiple vulnerabilities...

  9. V-145: IBM Tivoli Federated Identity Manager Products Java Multiple...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    V-145: IBM Tivoli Federated Identity Manager Products Java Multiple Vulnerabilities April 30, 2013 - 12:09am Addthis PROBLEM: IBM Tivoli Federated Identity Manager Products Java ...

  10. U-228: BlackBerry Tablet OS Flash Player Multiple Vulnerabilities...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Addthis PROBLEM: BlackBerry Tablet OS Flash Player Multiple Vulnerabilities PLATFORM: Adobe Flash Player versions included with BlackBerry PlayBook tablet software versions...

  11. U-277: Google Chrome Multiple Flaws Let Remote Users Execute...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Addthis PROBLEM: Google Chrome Multiple Flaws Let Remote Users Execute Arbitrary Code PLATFORM: Version(s): prior to 22.0.1229.92 ABSTRACT: Several vulnerabilities were...

  12. U-237: Mozilla Firefox CVE-2012-1950 Address Bar URI Spoofing...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Addthis PROBLEM: Mozilla Firefox CVE-2012-1950 Address Bar URI Spoofing Vulnerability PLATFORM: Version(s): Mozilla Firefox 6 - 12 ABSTRACT: To exploit this issue, an attacker...

  13. Open problems in condensed matter physics, 1987 (Conference)...

    Office of Scientific and Technical Information (OSTI)

    Conference: Open problems in condensed matter physics, 1987 Citation Details In-Document Search Title: Open problems in condensed matter physics, 1987 The 1970's and 1980's can be ...

  14. Quantum mechanics problems in observer's mathematics

    SciTech Connect (OSTI)

    Khots, Boris; Khots, Dmitriy

    2012-11-06

    This work considers the ontology, guiding equation, Schrodinger's equation, relation to the Born Rule, the conditional wave function of a subsystem in a setting of arithmetic, algebra and topology provided by Observer's Mathematics (see www.mathrelativity.com). Observer's Mathematics creates new arithmetic, algebra, geometry, topology, analysis and logic which do not contain the concept of continuum, but locally coincide with the standard fields. Certain results and communications pertaining to solutions of these problems are provided. In particular, we prove the following theorems: Theorem I (Two-slit interference). Let {Psi}{sub 1} be a wave from slit 1, {Psi}{sub 2} - from slit 2, and {Psi} = {Psi}{sub 1}+{Psi}{sub 2}. Then the probability of {Psi} being a wave equals to 0.5. Theorem II (k-bodies solution). For W{sub n} from m-observer point of view with m>log{sub 10}((2 Multiplication-Sign 10{sup 2n}-1){sup 2k}+1), the probability of standard expression of Hamiltonian variation is less than 1 and depends on n,m,k.

  15. Fundamental Scientific Problems in Magnetic Recording

    SciTech Connect (OSTI)

    Schulthess, T.C.; Miller, M.K.

    2007-06-27

    Magnetic data storage technology is presently leading the high tech industry in advancing device integration--doubling the storage density every 12 months. To continue these advancements and to achieve terra bit per inch squared recording densities, new approaches to store and access data will be needed in about 3-5 years. In this project, collaboration between Oak Ridge National Laboratory (ORNL), Center for Materials for Information Technology (MINT) at University of Alabama (UA), Imago Scientific Instruments, and Seagate Technologies, was undertaken to address the fundamental scientific problems confronted by the industry in meeting the upcoming challenges. The areas that were the focus of this study were to: (1) develop atom probe tomography for atomic scale imaging of magnetic heterostructures used in magnetic data storage technology; (2) develop a first principles based tools for the study of exchange bias aimed at finding new anti-ferromagnetic materials to reduce the thickness of the pinning layer in the read head; (3) develop high moment magnetic materials and tools to study magnetic switching in nanostructures aimed at developing improved writers of high anisotropy magnetic storage media.

  16. THE INFLUENCE OF RED SPIRAL GALAXIES ON THE SHAPE OF THE LOCAL K-BAND LUMINOSITY FUNCTION

    SciTech Connect (OSTI)

    Bonne, Nicolas J.; Brown, Michael J. I.; Jones, Heath; Pimbblet, Kevin A.

    2015-02-01

    We have determined K-band luminosity functions for 13,325 local universe galaxies as a function of morphology and color (for K {sub tot} ≤ 10.75). Our sample is drawn from the Two Micron All Sky Survey Extended Source Catalog, with all sample galaxies having measured morphologies and distances (including 4219 archival redshift-independent distances). The luminosity function for our total sample is in good agreement with previous works, but is relatively smooth at faint magnitudes (due to bulk flow distance corrections). We investigated the differences due to morphological and color selection using 5417 sample galaxies with NASA Sloan Atlas optical colors and find that red spirals comprise 20%-50% of all spirals with –25 ≤ M{sub K}  < –20. Fainter than M{sub K} = –24, red spirals are as common as early types, explaining the different faint end slopes (α = –0.87 and –1.00 for red and early-types, respectively). While we find red spirals comprise more than 50% of all M{sub K}  < –25 spiral galaxies, they do not dominate the bright end of the overall red galaxy luminosity function, which is dominated by early-type galaxies. The brightest red spirals have ongoing star formation and those without are frequently misclassified as early-types. The faintest ones have an appearance and Sérsic indices consistent with faded disks, rather than true bulge-dominated galaxies.

  17. Role of manganese in red long-lasting phosphorescence of manganese-doped diopside for in vivo imaging

    SciTech Connect (OSTI)

    Lecointre, A.; Bessire, A.; Priolkar, K.R.; Gourier, D.; Wallez, G.; Viana, B.

    2013-05-15

    Highlights: ? Long-lasting phosphorescence of CaMgSi{sub 2}O{sub 6}:Mn is studied for bioimaging application. ? CaMgSi{sub 2}O{sub 6}:Mn yields orange and red luminescence of Mn{sup II}{sub Ca} and Mn{sup II}{sub Mg}, respectively. ? Red Mn{sup II}{sub Mg} emission dominates long-lasting phosphorescence spectra. ? Mn mainly substitutes Mg. ? Mn{sup II}{sub Mg} plays the role of hole trap in the persistent luminescence mechanism. - Abstract: Materials with red long-lasting phosphorescence, such as Mn{sup II}-doped diopsides, can be used for small animal in vivo imaging. CaMgSi{sub 2}O{sub 6}:Mn powders with various amounts of Mn were prepared by solgel to investigate their long-lasting phosphorescence mechanism. X-ray diffraction, X-ray absorption fine and near-edge structure and electron paramagnetic resonance showed that manganese is quantitatively introduced in the structure as Mn{sup II}. Most of the Mn doping ions substitute Mg and possess a highly elongated octahedral environment. While photoluminescence and X-ray excited optical luminescence spectra show both orange (585 nm) and red (685 nm) {sup 4}T{sub 1} ({sup 4}G) ? {sup 6}A{sub 1} ({sup 6}S) emission of Mn{sup II}{sub Ca} and Mn{sup II}{sub Mg}, respectively, Mn{sup II}{sub Mg} red emission dominates long-lasting phosphorescence and thermally stimulated luminescence spectra. These results point to Mn{sup II}{sub Mg} as the preferential hole trap and recombination center in the long-lasting phosphorescence mechanism. An intense persistent red emission suitable for in vivo imaging probes is obtained for the highest nominal Mn content (7.5%)

  18. Some Lessons Learned from 20 Years in RedOx Flow Battery R&d | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy Some Lessons Learned from 20 Years in RedOx Flow Battery R&d Some Lessons Learned from 20 Years in RedOx Flow Battery R&d Presentation by Steve Clarke, Applied Intellectual Capital, at the Flow Cells for Energy Storage Workshop held March 7-8, 2012, in Washington, DC. flowcells2012_clarke.pdf (1.38 MB) More Documents & Publications Flow Cells for Energy Storage Workshop Summary Report Flow Cells for Energy Storage Workshop Overview Energy Storage Systems 2014 Peer

  19. Possible problems in ENDF/B-VI.r8

    SciTech Connect (OSTI)

    Brown, D; Hedstrom, G

    2003-10-30

    This document lists the problems that we encountered in processing ENDF/B-VI.r8 that we suspect are problems with ENDF/B-VI.r8 itself. It also contains a comparison of linear interpolation methods. Finally, this documents proposes an alternative to the current scheme of reporting problems to the ENDF community.

  20. LED Traffic Lights Get Buy American Stamp | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Red. Yellow. Green. What LED traffic signals don't say: Made in USA. That is changing. ... Lindsey Gsell is a Staff Writer for Energy Empowers. Addthis Related Articles LED traffic ...

  1. A class of ejecta transport test problems

    SciTech Connect (OSTI)

    Hammerberg, James E; Buttler, William T; Oro, David M; Rousculp, Christopher L; Morris, Christopher; Mariam, Fesseha G

    2011-01-31

    Hydro code implementations of ejecta dynamics at shocked interfaces presume a source distribution function ofparticulate masses and velocities, f{sub 0}(m, v;t). Some of the properties of this source distribution function have been determined from extensive Taylor and supported wave experiments on shock loaded Sn interfaces of varying surface and subsurface morphology. Such experiments measure the mass moment of f{sub o} under vacuum conditions assuming weak particle-particle interaction and, usually, fully inelastic capture by piezo-electric diagnostic probes. Recently, planar Sn experiments in He, Ar, and Kr gas atmospheres have been carried out to provide transport data both for machined surfaces and for coated surfaces. A hydro code model of ejecta transport usually specifies a criterion for the instantaneous temporal appearance of ejecta with source distribution f{sub 0}(m, v;t{sub 0}). Under the further assumption of separability, f{sub 0}(m,v;t{sub 0}) = f{sub 1}(m)f{sub 2}(v), the motion of particles under the influence of gas dynamic forces is calculated. For the situation of non-interacting particulates, interacting with a gas via drag forces, with the assumption of separability and simplified approximations to the Reynolds number dependence of the drag coefficient, the dynamical equation for the time evolution of the distribution function, f(r,v,m;t), can be resolved as a one-dimensional integral which can be compared to a direct hydro simulation as a test problem. Such solutions can also be used for preliminary analysis of experimental data. We report solutions for several shape dependent drag coefficients and analyze the results of recent planar dsh experiments in Ar and Xe.

  2. Evaluation of replacement thread lubricants for red lead and graphite in mineral oil

    SciTech Connect (OSTI)

    Jungling, T.L.; Rauth, D.R.; Goldberg, D.

    1998-04-30

    Eight commercially available thread lubricants were evaluated to determine the best replacement for Red Lead and Graphite in Mineral Oil (RLGMO). The evaluation included coefficient of friction testing, high temperature anti-seizing testing, room temperature anti-galling testing, chemical analysis for detrimental impurities, corrosion testing, off-gas testing, and a review of health and environmental factors. The coefficient of friction testing covered a wide variety of factors including stud, nut, and washer materials, sizes, manufacturing methods, surface coatings, surface finishes, applied loads, run-in cycles, and relubrication. Only one lubricant, Dow Corning Molykote P37, met all the criteria established for a replacement lubricant. It has a coefficient of friction range similar to RLGMO. Therefore, it can be substituted directly for RLGMO without changing the currently specified fastener torque values for the sizes, materials and conditions evaluated. Other lubricants did not perform as well as Molykote P37 in one or more test or evaluation categories.

  3. IS DUST FORMING ON THE RED GIANT BRANCH IN 47 Tuc?

    SciTech Connect (OSTI)

    Boyer, Martha L.; Gordon, Karl D.; Meixner, Margaret; Sewilo, Marta; Shiao, Bernie; Van Loon, Jacco Th.; McDonald, Iain; Babler, Brian; Bracker, Steve; Meade, Marilyn; Block, Miwa; Engelbracht, Charles; Misselt, Karl; Hora, Joe; Indebetouw, Remy; Whitney, Barbara

    2010-03-10

    Using Spitzer Infrared Array Camera (IRAC) observations from the SAGE-SMC Legacy program and archived Spitzer IRAC data, we investigate dust production in 47 Tuc, a nearby massive Galactic globular cluster. A previous study detected infrared excess, indicative of circumstellar dust, in a large population of stars in 47 Tuc, spanning the entire red giant branch (RGB). We show that those results suffered from effects caused by stellar blending and imaging artifacts and that it is likely that no stars below {approx}1 mag from the tip of the RGB are producing dust. The only stars that appear to harbor dust are variable stars, which are also the coolest and most luminous stars in the cluster.

  4. Surface plasmon polariton assisted red shift in excitonic emission of semiconductor microflowers

    SciTech Connect (OSTI)

    Parameswaran, Chithra; Warrier, Anita R. Bingi, Jayachandra Vijayan, C.

    2014-10-15

    We report on the study of metal nanoparticle-semiconductor hybrid system composed of β-indium sulfide (β-In{sub 2}S{sub 3}) and gold (Au) nanoparticles. β-In{sub 2}S{sub 3} micron sized flower like structures (∼1 μm) and Au nanoparticles (∼10 nm) were synthesized by chemical route. These Au nanoparticles have surface plasmon resonance at ∼ 520 nm. We study the influence of Au surface plasmon polaritons on the radiative properties of the β-In{sub 2}S{sub 3} microflowers. As a result of the coupling between the surface plasmon polaritons and the excitons there is a red shift ∼ 50 nm in emission spectrum of hybrid β-In{sub 2}S{sub 3}-Au system. Such hybrid systems provide scope for a control on the optical properties of semiconductor microstructures, thus rendering them suitable for specific device applications in optoelectronics and photovoltaics.

  5. Computational design of a red fluorophore ligase for site-specific protein labeling in living cells

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Liu, Daniel S.; Nivon, Lucas G.; Richter, Florian; Goldman, Peter J.; Deerinck, Thomas J.; Yao, Jennifer Z.; Richardson, Douglas; Phipps, William S.; Ye, Anne Z.; Ellisman, Mark H.; et al

    2014-10-13

    In this study, chemical fluorophores offer tremendous size and photophysical advantages over fluorescent proteins but are much more challenging to target to specific cellular proteins. Here, we used Rosetta-based computation to design a fluorophore ligase that accepts the red dye resorufin, starting from Escherichia coli lipoic acid ligase. X-ray crystallography showed that the design closely matched the experimental structure. Resorufin ligase catalyzed the site-specific and covalent attachment of resorufin to various cellular proteins genetically fused to a 13-aa recognition peptide in multiple mammalian cell lines and in primary cultured neurons. We used resorufin ligase to perform superresolution imaging of themore » intermediate filament protein vimentin by stimulated emission depletion and electron microscopies. This work illustrates the power of Rosetta for major redesign of enzyme specificity and introduces a tool for minimally invasive, highly specific imaging of cellular proteins by both conventional and superresolution microscopies.« less

  6. Stacked white OLED having separate red, green and blue sub-elements

    SciTech Connect (OSTI)

    Forrest, Stephen; Qi, Xiangfei; Slootsky, Michael

    2014-07-01

    The present invention relates to efficient organic light emitting devices (OLEDs). The devices employ three emissive sub-elements, typically emitting red, green and blue, to sufficiently cover the visible spectrum. Thus, the devices may be white-emitting OLEDs, or WOLEDs. Each sub-element comprises at least one organic layer which is an emissive layer--i.e., the layer is capable of emitting light when a voltage is applied across the stacked device. The sub-elements are vertically stacked and are separated by charge generating layers. The charge-generating layers are layers that inject charge carriers into the adjacent layer(s) but do not have a direct external connection.

  7. Establishment of a viable population of red-cockaded woodpeckers at the Savannah River Site

    SciTech Connect (OSTI)

    Allen, D.H.

    1989-01-01

    In 1985 the Southeastern Forest Experiment Station in cooperation with the Department of Energy (DOE), the Savannah River Forest Station (SRFS) and the Savannah River Ecology Laboratory (SREL) initiated a research/management program to restore a viable population of red-cockaded woodpeckers (RCW) to the Savannah River Site (SRS). The program has progresses in two phases. The first phase (1985-1987) focused on stabilizing the declining RCW population at SRS. The second phase (1988-present) has focused on facilitating population expansion. In 1989 we have focused our efforts on development of techniques for excavating new RCW cavities, identification of old-growth stands with the potential of providing new nesting habitat to support population expansion, continued flying squirrel control, continued translocations of RCW's as needed, and monitoring clan composition and reproduction.

  8. Computational design of a red fluorophore ligase for site-specific protein labeling in living cells

    SciTech Connect (OSTI)

    Liu, Daniel S.; Nivon, Lucas G.; Richter, Florian; Goldman, Peter J.; Deerinck, Thomas J.; Yao, Jennifer Z.; Richardson, Douglas; Phipps, William S.; Ye, Anne Z.; Ellisman, Mark H.; Drennan, Catherine L.; Baker, David; Ting, Alice Y.

    2014-10-13

    In this study, chemical fluorophores offer tremendous size and photophysical advantages over fluorescent proteins but are much more challenging to target to specific cellular proteins. Here, we used Rosetta-based computation to design a fluorophore ligase that accepts the red dye resorufin, starting from Escherichia coli lipoic acid ligase. X-ray crystallography showed that the design closely matched the experimental structure. Resorufin ligase catalyzed the site-specific and covalent attachment of resorufin to various cellular proteins genetically fused to a 13-aa recognition peptide in multiple mammalian cell lines and in primary cultured neurons. We used resorufin ligase to perform superresolution imaging of the intermediate filament protein vimentin by stimulated emission depletion and electron microscopies. This work illustrates the power of Rosetta for major redesign of enzyme specificity and introduces a tool for minimally invasive, highly specific imaging of cellular proteins by both conventional and superresolution microscopies.

  9. RED SUPERGIANT STARS IN THE LARGE MAGELLANIC CLOUD. I. THE PERIOD-LUMINOSITY RELATION

    SciTech Connect (OSTI)

    Yang Ming; Jiang, B. W. E-mail: bjiang@bnu.edu.cn

    2011-01-20

    From previous samples of red supergiants (RSGs) by various groups, 191 objects are assembled to compose a large sample of RSG candidates in LMC. For 189 of them, the identity as an RSG is verified by their brightness and color indexes in several near- and mid-infrared bands related to the Two Micron All Sky Survey (2MASS) JHK{sub S} bands and the Spitzer/IRAC and Spitzer/MIPS bands. From the visual time-series photometric observations by the ASAS and MACHO projects which cover nearly 8-10 years, the period and amplitude of light variation are analyzed carefully using both the phase dispersion minimization and Period04 methods. According to the properties of light variation, these objects are classified into five categories: (1) 20 objects are saturated in photometry or located in crowded stellar field with poor photometric results, (2) 35 objects with too complex variation to have any certain period, (3) 23 objects with irregular variation, (4) 16 objects with semi-regular variation, and (5) 95 objects with long secondary period (LSP) among which 31 have distinguishable short period and 51 have a long period shorter than 3000 days that can be determined with reasonable accuracy. For the semi-regular variables and the LSP variables with distinguishable short periods, the period-luminosity (P-L) relation is analyzed in the visual, near-infrared, and mid-infrared bands. It is found that the P-L relation is tight in the infrared bands such as the 2MASS JHK{sub S} bands and the Spitzer/IRAC bands, in particular in the Spitzer/IRAC [3.6] and [4.5] bands; meanwhile, the P-L relation is relatively sparse in the V band which may be caused by inhomogeneous interstellar extinction. The results are compared with others' P-L relationships for RSGs and the P-L sequences of red giants in LMC.

  10. Continuous sea-floor spreading in Red Sea: an alternative interpretation of magnetic anomaly pattern

    SciTech Connect (OSTI)

    La Brecque, J.L.; Zitellini

    1985-04-01

    The magnetic anomaly pattern over the Red Sea can be modeled as a continuous system of sea-floor spreading from the early Miocene to the present by using a timevarying process filter. The half spreading rate is approximately 1 cm/yr (0.4 in./yr) since initial rifting. The parameters that determine the process filter and development of the transition zone are the intrusion parameter (a measure of the dispersion of feeder dikes or horizontal strain about the rift axis), a flow parameter (a measure of the average flow width), and the effusion parameter (a measure of the volcanic effusion and thickness of layer 2). The authors estimate the flow parameter to be 2.7km(1.7 mi) and the intrusion parameter to be 7.5km(4.7 mi) at early rifting. These values suggest that a wide distribution of axial dikes or horizontal strain is the dominant factor in forming the magnetic anomaly pattern. Reduction in the width of the intrusion parameter and the effusion rate as rifting proceeded resulted in focusing of the strain, thinning of layer 2, and formation of the Red Sea deeps. Their modeling suggests that phase 2, or the stratoid phase, began about the time of anomaly 5C or chron C5C approximately 16 Ma. This age is compatible with geologic estimates of the initial rifting at the late Oligocene to early Miocene (Coleman, 1974; Gass, 1977). The opening rate for Africa-Arabia plate motion has remained relatively constant since early rifting although the African margin appears to be accreting faster than the Arabian plate.

  11. Factors affecting breeding season survival of Red-Headed Woodpeckers in South Carolina.

    SciTech Connect (OSTI)

    Kilgo, John, C.; Vukovich, Mark

    2011-11-18

    Red-headed woodpecker (Melanerpes erythrocephalus) populations have declined in the United States and Canada over the past 40 years. However, few demographic studies have been published on the species and none have addressed adult survival. During 2006-2007, we estimated survival probabilities of 80 radio-tagged red-headed woodpeckers during the breeding season in mature loblolly pine (Pinus taeda) forests in South Carolina. We used known-fate models in Program MARK to estimate survival within and between years and to evaluate the effects of foliar cover (number of available cover patches), snag density treatment (high density vs. low density), and sex and age of woodpeckers. Weekly survival probabilities followed a quadratic time trend, being lowest during mid-summer, which coincided with the late nestling and fledgling period. Avian predation, particularly by Cooper's (Accipiter cooperii) and sharp-shinned hawks (A. striatus), accounted for 85% of all mortalities. Our best-supported model estimated an 18-week breeding season survival probability of 0.72 (95% CI = 0.54-0.85) and indicated that the number of cover patches interacted with sex of woodpeckers to affect survival; females with few available cover patches had a lower probability of survival than either males or females with more cover patches. At the median number of cover patches available (n = 6), breeding season survival of females was 0.82 (95% CI = 0.54-0.94) and of males was 0.60 (95% CI = 0.42-0.76). The number of cover patches available to woodpeckers appeared in all 3 of our top models predicting weekly survival, providing further evidence that woodpecker survival was positively associated with availability of cover. Woodpecker survival was not associated with snag density. Our results suggest that protection of {ge}0.7 cover patches per ha during vegetation control activities in mature pine forests will benefit survival of this Partners In Flight Watch List species.

  12. FROM BLUE STAR-FORMING TO RED PASSIVE: GALAXIES IN TRANSITION IN DIFFERENT ENVIRONMENTS

    SciTech Connect (OSTI)

    Vulcani, Benedetta; Poggianti, Bianca M.; Fasano, Giovanni; Moretti, Alessia; Fritz, Jacopo; Calvi, Rosa; Paccagnella, Angela

    2015-01-01

    Exploiting a mass-complete (M {sub *}>10{sup 10.25} M {sub ?}) sample at 0.03red passive late types, and blue star-forming early types. Color fractions depend on mass and only for M {sub *}< 10{sup 10.7} M {sub ?} on environment. The incidence of red galaxies increases with increasing mass, and, for M {sub *}< 10{sup 10.7} M {sub ?}, decreases toward the group outskirts and in binary and single galaxies. The relative abundance of green and blue galaxies is independent of environment and increases monotonically with galaxy mass. We also inspect galaxy structural parameters, star-formation properties, histories, and ages and propose an evolutionary scenario for the different subpopulations. Color transformations are due to a reduction and suppression of the star-formation rate in both bulges and disks that does not noticeably affect galaxy structure. Morphological transitions are linked to an enhanced bulge-to-disk ratio that is due to the removal of the disk, not to an increase of the bulge. Our modeling suggests that green colors might be due to star-formation histories declining with long timescales, as an alternative scenario to the classical ''quenching'' processes. Our results suggest that galaxy transformations in star-formation activity and morphology depend neither on the environment nor on being a satellite or the most massive galaxy of a halo. The only environmental dependence we find is the higher fast quenching efficiency in groups giving origin to poststarburst signatures.

  13. Studies on reaction runaways for Urex/Purex solvent-nitric acid and red-oil synthesis

    SciTech Connect (OSTI)

    Kumar, Shekhar; Kumar, Rajnish; Koganti, S.B.

    2008-07-01

    In PUREX/UREX processes for recycling of spent nuclear fuels, 30% TBP solvent is used, This solvent has a small solubility in the aqueous phase. During concentration of the process solutions by an evaporation route, a runaway reaction between TBP and nitric acid is initiated at above 130 deg. C, leading to rapid pressurization and finally containment failure if proper venting is not provided. Red oil was synthesized for the first time in India, and its physical properties as well as thermodynamic parameters for the reaction were determined. It was experimentally established that the presence of metallic nitrates was not essential for red-oil formation as thought earlier. Various experiments have been completed for single-phase as well as two-phase runs. The most important finding of this work was lowering of the limiting acid concentration from the conventional values. In fact, in these experiments, red oil could be formed even at 2 N aqueous acidity. Thus, safety guidelines based on the classical literature are obsolete. New guidelines for the red-oil-safety are required. (authors)

  14. T-649: Red Hat Network Satellite Server Request Validation Flaw Permits Cross-Site Request Forgery Attacks

    Broader source: Energy.gov [DOE]

    The Red Hat Network (RHN) Satellite and Spacewalk services do not properly validate user-supplied. A remote user can create specially crafted HTML that, when loaded by a target authenticated user, will take actions on the target site acting as the target user.

  15. Investigation of intrinsic and extrinsic defects effective role on producing intense red emission in ZnO:Eu nanostructures

    SciTech Connect (OSTI)

    Najafi, Mehrdad Haratizadeh, Hamid

    2015-05-15

    Highlights: • Effective role of defects on producing red emission at indirect excitation. • V{sub Zn} and V{sub O} defects have important role on energy transfer. • Mg related defects and Zn{sub i} defects were responsible for blue emission. • Extrinsic and intrinsic defects mediated energy transfer to sensitize Eu{sup 3+} ions. • Decrease of red emission because of diminishing in oxygen vacancy. - Abstract: Europium doped ZnO nanorads and nanosheets were synthesized by hydrothermal method. Effects of Mg doping, morphology and annealing in oxygen ambient on structural and optical properties of ZnO nanostructures were investigated using X-ray diffraction (XRD), particle size analysis (PSA), thermo gravimetric analysis (TGA), differential thermal analysis (DTA), differential thermo gravimetry (DTG), scanning electron microscopy (SEM) and photoluminescence spectroscopy (PL). This study recommends that both of intrinsic and extrinsic defects facilitate energy transfer (ET) from the ZnO host to Eu{sup 3+} ions and consequently have efficient role on producing intense red emission at indirect excitation. The results also showed that annealing process improved the crystal structure of ZnO nanosheets due to decrease of surface defects; however decreased ET and red emission because of diminishing in oxygen vacancy. In addition in ZnO nanorods sample with more surface area in comparison with ZnO nanosheets sample deep level emissions are enhanced.

  16. Neutral red interlinked gold nanoparticles/multiwalled carbon nanotubes hybrid nanomaterial and its application for the detection of NADH

    SciTech Connect (OSTI)

    Tiwari, Ida Gupta, Mandakini

    2014-01-01

    Graphical abstract: - Highlights: • Fabricated a nanostructured hybrid material of GNPs/neutral red/MWCNTs. • GNPs decorated on MWCNT template by using neutral red as interlinker for first time. • Nanocomposite modified electrode employed successfully as sensor for NADH. • The electrode has high stability as it does not involve any biological entity. - Abstract: A novel nanocomposite of gold nanoparticles/neutral red/MWCNTs was prepared which was used to modify glassy carbon electrode. The prepared nanocomposite was physically characterized by scanning electron microscopy, transmission electron microscopy, zeta potential measurement, energy dispersive X-ray, FTIR spectroscopy, UV–visible spectroscopy. Electrochemical characterization was done using cyclic voltammetry technique. The modified glassy carbon electrode showed electrocatalytic activity toward the oxidation of NADH in 0.1 M phosphate buffer solution, pH 5.0. The modified electrode has better adhesion over the electrode surface, good stability as no leaching of neutral red based nanocomposite was observed. The oxidation of NADH started at 0.37 V and reached maxima at 0.52 V at the modified electrode surface. So the prepared composite modified electrode can be applied as electrochemical sensor for NADH. The sensitivity and detection limits of the modified glassy carbon electrode were found to be 0.588 μA/mM and 5 × 10{sup −7} at signal to noise ratio 3.

  17. Numerical solution of control problems governed by nonlinear differential equations

    SciTech Connect (OSTI)

    Heinkenschloss, M.

    1994-12-31

    In this presentation the author investigates an iterative method for the solution of optimal control problems. These problems are formulated as constrained optimization problems with constraints arising from the state equation and in the form of bound constraints on the control. The method for the solution of these problems uses the special structure of the problem arising from the bound constraint and the state equation. It is derived from SQP methods and projected Newton methods and combines the advantages of both methods. The bound constraint is satisfied by all iterates using a projection, the nonlinear state equation is satisfied in the limit. Only a linearized state equation has to be solved in every iteration. The solution of the linearized problems are done using multilevel methods and GMRES.

  18. On the computational complexity of sequence design problems

    SciTech Connect (OSTI)

    Hart, W.E. [Sandia National Labs., Albuquerque, NM (United States)

    1997-12-01

    Inverse protein folding concerns the identification of an amino acid sequence that folds to a given structure. Sequence design problems attempt to avoid the apparant difficulty of inverse protein folding by defining an energy that can be minimized to find protein-like sequences. We evaluate the practical relevance of two sequence design problems by analyzing their computational complexity. We show that the canonical method of sequence design is intractable and describe approximation algorithms for this problem. We also describe an efficient algorithm that exactly solves the grand canonical method. Our analysis shows how sequence design problems can fail to reduce the difficulty of the inverse protein folding problem and highlights the need to analyze these problems to evaluate their practical relevance. 10 refs., 8 figs.

  19. On the computational complexity of sequence design problems

    SciTech Connect (OSTI)

    Hart, W.E. [Sandia National Labs., Albuquerque, NM (United States). Algorithms and Discrete Mathematics Dept.

    1996-12-31

    Inverse protein folding concerns the identification of an amino acid sequence that folds to a given structure. Sequence design problems attempt to avoid the apparent difficulty of inverse protein folding by defining an energy that can be minimized to find protein-like sequences. The authors evaluate the practical relevance of two sequence design problems by analyzing their computation complexity. They show that the canonical method of sequence design is intractable, and describe approximation algorithms for this problem. The authors also describe an efficient algorithm that exactly solves the grand canonical method. The analysis shows how sequence design problems can fail to reduce the difficulty of the inverse protein folding problem, and highlights the need to analyze these problems to evaluate their practical relevance.

  20. A K{sub S} AND IRAC SELECTION OF HIGH-REDSHIFT EXTREMELY RED OBJECTS

    SciTech Connect (OSTI)

    Wang, Wei-Hao; Barger, Amy J.; Cowie, Lennox L.

    2012-01-10

    In order to find the most extreme dust-hidden high-redshift galaxies, we select 196 extremely red objects in the K{sub S} and Infrared Array Camera (IRAC) bands (KIEROs, [K{sub s} - 4.5 {mu}m]{sub AB} > 1.6) in the 0.06 deg{sup 2} Great Observatories Origins Deep Surveys-North (GOODS-N) region. This selection avoids the Balmer breaks of galactic spectra at z < 4 and picks up red galaxies with strong dust extinction. The photometric redshifts of KIEROs are between 1.5 and 5, with {approx}70% at z {approx} 2-4. KIEROs are very massive, with M{sub *} {approx} 10{sup 10}-10{sup 12} M{sub Sun }. They are optically faint and usually cannot be picked out by the Lyman break selection. On the other hand, the KIERO selection includes approximately half of the known millimeter and submillimeter galaxies in the GOODS-N. Stacking analyses in the radio, millimeter, and submillimeter all show that KIEROs are much more luminous than average 4.5 {mu}m-selected galaxies. Interestingly, the stacked fluxes for Advanced Camera for Surveys (ACS)-undetected KIEROs in these wave bands are 2.5-5 times larger than those for ACS-detected KIEROs. With the stacked radio fluxes and the local radio-FIR correlation, we derive mean infrared luminosities of (2-7) Multiplication-Sign 10{sup 12} L{sub Sun} and mean star formation rates (SFRs) of 400-1200 M{sub Sun} yr{sup -1} for KIEROs with redshifts. We do not find evidence of a significant subpopulation of passive KIEROs. The large stellar masses and SFRs imply that KIEROs are z > 2 massive galaxies in rapid formation. Our results show that a large sample of dusty ultraluminous sources can be selected in this way and that a large fraction of high-redshift star formation is hidden by dust.

  1. On parameterization of the inverse problem for estimating aquifer...

    Office of Scientific and Technical Information (OSTI)

    Title: On parameterization of the inverse problem for estimating aquifer properties using tracer data Authors: Kowalsky, M. B. ; Finsterle, S. ; Commer, M. ; Williams, K. H. ; ...

  2. FELIX: advances in modeling forward and inverse icesheet problems...

    Office of Scientific and Technical Information (OSTI)

    icesheet problems. Authors: Perego, Mauro ; Eldred, Michael S. ; Gunazburger, Max ; Salinger, Andrew G. ; Kalashnikova, Irina ; Ju, L. ; Hoffman, M. ; Leng, W. ; Price, S ;...

  3. Crowdsourcing Initiative Seeks Buildings-Related Problems to...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    The Building Technologies Office is partnering with the successful SunShot Catalyst crowdsourcing initiative to identify and solve problems related to software development, data, ...

  4. European Geothermal Drilling Experience-Problem Areas and Case...

    Office of Scientific and Technical Information (OSTI)

    Drilling Experience-Problem Areas and Case Studies Baron, G.; Ungemach, P. 15 GEOTHERMAL ENERGY; BOREHOLES; DRILLING; EVALUATION; EXPLORATION; GEOTHERMAL RESOURCES; ITALY;...

  5. Tesla Tackling Problem of Power Storage: Chamberlain - Joint...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    May 1, 2015, Videos Tesla Tackling Problem of Power Storage: Chamberlain Jeff Chamberlain and Bloomberg's David Gura speak on Bloomberg West discussing the potential global impact ...

  6. History, Applications, Numerical Values and Problems with the...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Numerical Values and Problems with the Calculation of EROI (Energy Return on Energy Investment) Professor Charles Hall State University of NY College of Environmental Science and...

  7. Synthetic fossil fuel technologies: health problems and intersociety...

    Office of Scientific and Technical Information (OSTI)

    Conference: Synthetic fossil fuel technologies: health problems and intersociety cooperation Citation Details In-Document Search Title: Synthetic fossil fuel technologies: health ...

  8. Trending and root cause analysis of TWRS radiological problem reports

    SciTech Connect (OSTI)

    Brown, R.L.

    1997-07-31

    This document provides a uniform method for trending and performing root cause analysis for radiological problem reports at Tank Waste Remediation System (TWRS).

  9. Using Energy-Filtered TEM to Solve Practical Materials Problems...

    Office of Scientific and Technical Information (OSTI)

    Title: Using Energy-Filtered TEM to Solve Practical Materials Problems With Inspirations from Gareth Thomas. Abstract not provided. Authors: Sugar, Joshua Daniel ; El Gabaly ...

  10. Assessment of stormwater impoundments as contaminant hazards to red-winged blackbirds

    SciTech Connect (OSTI)

    Eisemann, J.D.; Spading, D.

    1995-12-31

    Stormwater impoundments, a recent engineering solution to the treatment of stormwater, slow runoff and allow the settling of sediments and associated contaminants. They also provide valuable habitat in urban settings. In this study, the authors used red-winged blackbirds (Agelaius phoeniceus) to indicate potential contaminant hazards to avian species reared in stormwater impoundments. The authors studied four types of impoundments, grouped by the development in the supplying drainage; residential, commercial and highway development and a reference site with no development. They examined physiological biomarkers of 56, 8-day old nestlings, nesting parameters and foraging location of parent birds, food items delivered to nestlings, water chemistry, and sediments. Biomarker analysis included whole blood analysis for ALAD, blood serum chemistry (i.e., ALT, AST, CK, LDH, glucose, triglycerides, cholesterol, uric acid) and oxidative stress enzymes in liver tissue. Hepatic EROD and brain acetylcholinesterase levels were analyzed to assess exposure to contaminants other than metals. All samples were assayed for heavy metals by atomic absorption. A total of 198 nests were located. Overall nest success was significantly higher at the impoundment with no development in the supplying drainage. Focal parent feeding observations indicated females foraged less often in impoundments in highway locations. Preliminary analyses indicate sediments are not accumulating high metal levels. Serum and hepatic biomarker analyses indicate no statistically significant effects among drainage types.

  11. THE PERIOD-LUMINOSITY RELATION OF RED SUPERGIANT STARS IN THE SMALL MAGELLANIC CLOUD

    SciTech Connect (OSTI)

    Yang Ming; Jiang, B. W. E-mail: bjiang@bnu.edu.cn

    2012-07-20

    The characteristics of light variation of red supergiant (RSG) stars in the Small Magellanic Cloud (SMC) are analyzed based on the nearly 8-10 year data collected by the ASAS and MACHO projects. The 126 identified RSGs are classified into five categories accordingly: 20 with poor photometry, 55 with no reliable period, 6 with semi-regular variation, 15 with a long secondary period (LSP) and distinguishable short period, and 30 with only an LSP. For the semi-regular variables and the LSP variables with distinguishable short period, the K{sub S} -band period-luminosity (P-L) relation is analyzed and compared with that of the Galaxy, the Large Magellanic Cloud, and M33. It is found that the RSGs in these galaxies obey a similar P-L relation except for those in the Galaxy. In addition, the P-L relations in the infrared bands, namely, the 2MASS JHK{sub S} , Spitzer/IRAC, and Spitzer/MIPS 24 {mu}m bands, are derived with high reliability. The best P-L relation occurs in the Spitzer/IRAC [3.6] and [4.5] bands. Based on the comparison with the theoretical calculation of the P-L relation, the mode of pulsation of RSGs in the SMC is suggested to be the first-overtone radial mode.

  12. DUST IS FORMING ALONG THE RED GIANT BRANCH OF 47 Tuc

    SciTech Connect (OSTI)

    Origlia, Livia; Fusi Pecci, Flavio; Rood, Robert T.; Fabbri, Sara; Ferraro, Francesco R.; Dalessandro, Emanuele; Rich, R. Michael E-mail: flavio.fusipecci@oabo.inaf.i E-mail: sara.fabbri@studio.unibo.i E-mail: emanuele.dalessandr2@unibo.i

    2010-07-20

    We present additional evidence that dust is really forming along the red giant branch (RGB) of 47 Tuc at luminosities ranging from above the horizontal branch to the RGB tip. The presence of dust had been inferred from an infrared excess in the (K - 8) color, with K measured from high spatial resolution ground-based near-IR photometry and '8' referring to Spitzer-Infrared Array Camera (IRAC) 8 {mu}m photometry. We show how (K - 8) is a far more sensitive diagnostic for detecting tiny circumstellar envelopes around warm giants than colors using only the Spitzer-IRAC bands, for example, the (3.6 - 8) color used by Boyer et al. In addition, we also show high-resolution Hubble Space Telescope Advanced Camera for Surveys I-band images of the giant stars that have (K - 8) color excess. These images clearly demonstrate that the Boyer et al. statement that our detections of color excess associated with stars below the RGB tip arise from blends and artifacts is simply not valid.

  13. CYANOGEN IN NGC 1851 RED GIANT BRANCH AND ASYMPTOTIC GIANT BRANCH STARS: QUADRIMODAL DISTRIBUTIONS

    SciTech Connect (OSTI)

    Campbell, S. W.; Stancliffe, R. J.; Lattanzio, J. C.; Angelou, G. C.; D'Orazi, V.; Yong, D.; Wylie-de Boer, E. C.; Martell, S. L.; Grundahl, F.; Sneden, C. E-mail: david.yong@anu.edu.au

    2012-12-10

    The Galactic globular cluster NGC 1851 has raised much interest since Hubble Space Telescope photometry revealed that it hosts a double subgiant branch. Here we report on our homogeneous study into the cyanogen (CN) band strengths in the red giant branch (RGB) population (17 stars) and asymptotic giant branch (AGB) population (21 stars) using AAOmega/2dF spectra with R {approx} 3000. We discover that NGC 1851 hosts a quadrimodal distribution of CN band strengths in its RGB and AGB populations. This result supports the merger formation scenario proposed for this cluster, such that the CN quadrimodality could be explained by the superposition of two 'normal' bimodal populations. A small sample overlap with an abundance catalog allowed us to tentatively explore the relationship between our CN populations and a range of elemental abundances. We found a striking correlation between CN and [O/Na]. We also found that the four CN peaks may be paired-the two CN-weaker populations being associated with low Ba and the two CN-stronger populations with high Ba. If true, then s-process abundances would be a good diagnostic for disentangling the two original clusters in the merger scenario. More observations are needed to confirm the quadrimodality and also the relationship between the subpopulations. We also report CN results for NGC 288 as a comparison. Our relatively large samples of AGB stars show that both clusters have a bias toward CN-weak AGB populations.

  14. Red giant stars from the Sloan digital sky survey. II. Distances

    SciTech Connect (OSTI)

    Tan, Kefeng; Chen, Yuqin; Carrell, Kenneth; Zhao, Jingkun; Zhao, Gang

    2014-10-10

    We present distance determinations for a large and clean sample of red giant branch stars selected from the ninth data release of the Sloan Digital Sky Survey. The distances are calculated based on both observational cluster fiducials and theoretical isochrones. Distributions of distances from the two methods are very similar with peaks at about 10 kpc and tails extending to more than 70 kpc. We find that distances from the two methods agree well for the majority of the sample stars; though, on average, distances based on isochrones are 10% higher than those based on fiducials. We test the accuracy of our distance determinations using 332 stars from 10 Galactic globular and open clusters. The average relative deviation from the literature cluster distances is 4% for the fiducial-based distances and 8% for the isochrone-based distances, both of which are within the uncertainties. We find that the effective temperature and surface gravity derived from low-resolution spectra are not accurate enough to essentially improve the performance of distance determinations. However, for stars with significant extinction, effective temperature may help to better constrain their distances to some extent. We make our sample stars and their distances available from an online catalog. The catalog comprises 17,941 stars with reasonable distance estimations reaching to more than 70 kpc, which is suitable for the investigation of the formation and evolution of the Galaxy, especially the Galactic halo.

  15. METALLICITY AND KINEMATIC DISTRIBUTIONS OF RED HORIZONTAL-BRANCH STARS FROM THE SDSS SURVEY

    SciTech Connect (OSTI)

    Chen, Y. Q.; Zhao, G.; Zhao, J. K.; Xue, X. X.; Schuster, W. J. E-mail: schuster@astrosen.unam.m

    2010-08-15

    On the basis of a recently derived color-metallicity relation and stellar parameters from the Sloan Digital Sky Survey Data Release 7 spectroscopic survey, a large sample of red horizontal-branch (RHB) candidates have been selected to serve as standard candles. The metallicity and kinematic distributions of these stars indicate that they mainly originate from the thick-disk and the halo populations. The typical thick disk is characterized by the first group peaking at [Fe/H] {approx} -0.6, V{sub rot} {approx} 170 km s{sup -1} with a vertical scale height around |Z| {approx} 1.2 kpc, while stars with [Fe/H] < -0.9 are dominated by the halo population. Two sub-populations of the halo are suggested by the RHB stars peaking at [Fe/H] {approx} -1.3: one component with V{sub rot} > 0 km s{sup -1} (Halo I) shows a sign of metallicity gradient in the [Fe/H] versus |Z| diagram, while the other with V{sub rot} < 0 km s{sup -1} (Halo II) does not. The Halo I mainly clumps at the inner halo with R < 10 kpc and the Halo II comes both from the inner halo with R < 10 kpc and the outer halo with R > 10 kpc based on the star distribution in the R versus |Z| diagram.

  16. Infrared tip of the red giant branch and distances to the MAFFEI/IC 342 group

    SciTech Connect (OSTI)

    Wu, Po-Feng; Tully, R. Brent; Jacobs, Bradley A.; Rizzi, Luca; Dolphin, Andrew E.; Karachentsev, Igor D.

    2014-07-01

    In this paper, we extend the use of the tip of the red giant branch (TRGB) method to near-infrared wavelengths from the previously used I-band, using the Hubble Space Telescope (HST) Wide Field Camera 3 (WFC3). Upon calibration of a color dependency of the TRGB magnitude, the IR TRGB yields a random uncertainty of ∼5% in relative distance. The IR TRGB methodology has an advantage over the previously used Advance Camera for Surveys F606W and F814W filter set for galaxies that suffer from severe extinction. Using the IR TRGB methodology, we obtain distances toward three principal galaxies in the Maffei/IC 342 complex, which are located at low Galactic latitudes. New distance estimates using the TRGB method are 3.45{sub −0.13}{sup +0.13} Mpc for IC 342, 3.37{sub −0.23}{sup +0.32} Mpc for Maffei 1, and 3.52{sub −0.30}{sup +0.32} Mpc for Maffei 2. The uncertainties are dominated by uncertain extinction, especially for Maffei 1 and Maffei 2. Our IR calibration demonstrates the viability of the TRGB methodology for observations with the James Webb Space Telescope.

  17. Measuring subhalo mass in redMaPPer clusters with CFHT Stripe 82 Survey

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Li, Ran; Shan, Huanyuan; Kneib, Jean -Paul; Mo, Houjun; Rozo, Eduardo; Leauthaud, Alexie; Moustakas, John; Xie, Lizhi; Erben, Thomas; Van Waerbeke, Ludovic; et al

    2016-03-07

    Here, we use the shear catalogue from the CFHT Stripe-82 Survey to measure the subhalo masses of satellite galaxies in redMaPPer clusters. Assuming a Chabrier initial mass function and a truncated NFW model for the subhalo mass distribution, we find that the subhalo mass to galaxy stellar mass ratio increases as a function of projected halo-centric radius rp, from Msub/Mstar = 4.43+6.63–2.23 at rp ε [0.1, 0.3] h–1 Mpc to Msub/Mstar = 75.40+19.73–19.09 at rp ε [0.6, 0.9] h–1 Mpc. We also investigate the dependence of subhalo masses on stellar mass by splitting satellite galaxies into two stellar mass bins:more » 10 < log (Mstar/h–1M⊙) < 10.5 and 11 < log (Mstar/h–1 M⊙) < 12. The best-fitting subhalo mass of the more massive satellite galaxy bin is larger than that of the less massive satellites: log(Msub/h–1M⊙) = 11.14+0.66–0.73 (Msub/Mstar = 19.5+19.8–17.9) versus log(Msub/h–1M⊙) = 12.38+0.16–0.16 (Msub/Mstar = 21.1+7.4–7.7).« less

  18. Photoactive transparent nano-crystalline glass-ceramic for remazole red dye degradation

    SciTech Connect (OSTI)

    Gad-Allah, Tarek A.; Margha, Fatma H.

    2012-12-15

    Graphical abstract: Display Omitted Highlights: ? Preparation and characterization of novel transparent nanocrystalline glass-ceramic. ? Precipitation of photoactive phases by using controlled heat-treatment. ? Conservation of transparency along with photoactivity. ? Using the prepared nanocrystalline glass-ceramic in water purification. -- Abstract: Transparent glass ceramic material was prepared from alkali-borosilicate glass containing titania by proper heat treatment scheme. The prepared samples were characterized using differential thermal analysis, X-ray diffraction, transmission electron microscope, selected area electron diffraction and UVvisible spectroscopy. The applied heat treatment program allowed the crystallization of nano-crystalline anatase, rutile, barium titanate, titanium borate and silicate phases while maintaining the transparency. The precipitated nano-crystalline anatase and rutile phases were responsible for the observed high photocatalytic activity of the prepared samples. Samples of 24.29 and 32.39 TiO{sub 2} wt% showed better efficiency for the decolorization of remazole red dye compared with commercial-TiO{sub 2} used in preparation of glass-ceramic. The reuse of prepared glass-ceramic photocatalyst with nearly same efficiency for different times was also proved.

  19. On a Highly Nonlinear Self-Obstacle Optimal Control Problem

    SciTech Connect (OSTI)

    Di Donato, Daniela; Mugnai, Dimitri

    2015-10-15

    We consider a non-quadratic optimal control problem associated to a nonlinear elliptic variational inequality, where the obstacle is the control itself. We show that, fixed a desired profile, there exists an optimal solution which is not far from it. Detailed characterizations of the optimal solution are given, also in terms of approximating problems.

  20. A TALE OF DWARFS AND GIANTS: USING A z = 1.62 CLUSTER TO UNDERSTAND HOW THE RED SEQUENCE GREW OVER THE LAST 9.5 BILLION YEARS

    SciTech Connect (OSTI)

    Rudnick, Gregory H.; Tran, Kim-Vy; Papovich, Casey; Momcheva, Ivelina; Willmer, Christopher

    2012-08-10

    We study the red sequence in a cluster of galaxies at z = 1.62 and follow its evolution over the intervening 9.5 Gyr to the present day. Using deep YJK{sub s} imaging with the HAWK-I instrument on the Very Large Telescope, we identify a tight red sequence and construct its rest-frame i-band luminosity function (LF). There is a marked deficit of faint red galaxies in the cluster that causes a turnover in the LF. We compare the red-sequence LF to that for clusters at z < 0.8, correcting the luminosities for passive evolution. The shape of the cluster red-sequence LF does not evolve between z = 1.62 and z = 0.6 but at z < 0.6 the faint population builds up significantly. Meanwhile, between z = 1.62 and 0.6 the inferred total light on the red sequence grows by a factor of {approx}2 and the bright end of the LF becomes more populated. We construct a simple model for red-sequence evolution that grows the red sequence in total luminosity and matches the constant LF shape at z > 0.6. In this model the cluster accretes blue galaxies from the field whose star formation is quenched and who are subsequently allowed to merge. We find that three to four mergers among cluster galaxies during the 4 Gyr between z = 1.62 and z = 0.6 match the observed LF evolution between the two redshifts. The inferred merger rate is consistent with other studies of this cluster. Our result supports the picture that galaxy merging during the major growth phase of massive clusters is an important process in shaping the red-sequence population at all luminosities.

  1. Domain wall and isocurvature perturbation problems in axion models

    SciTech Connect (OSTI)

    Kawasaki, Masahiro; Yoshino, Kazuyoshi; Yanagida, Tsutomu T. E-mail: tsutomu.tyanagida@ipmu.jp

    2013-11-01

    Axion models have two serious cosmological problems, domain wall and isocurvature perturbation problems. In order to solve these problems we investigate the Linde's model in which the field value of the Peccei-Quinn (PQ) scalar is large during inflation. In this model the fluctuations of the PQ field grow after inflation through the parametric resonance and stable axionic strings may be produced, which results in the domain wall problem. We study formation of axionic strings using lattice simulations. It is found that in chaotic inflation the axion model is free from both the domain wall and the isocurvature perturbation problems if the initial misalignment angle ?{sub a} is smaller than O(10{sup ?2}). Furthermore, axions can also account for the dark matter for the breaking scale v ? 10{sup 12?16}GeV and the Hubble parameter during inflation H{sub inf}?<10{sup 11?12}GeV in general inflation models.

  2. Shell Element Verification & Regression Problems for DYNA3D

    SciTech Connect (OSTI)

    Zywicz, E

    2008-02-01

    A series of quasi-static regression/verification problems were developed for the triangular and quadrilateral shell element formulations contained in Lawrence Livermore National Laboratory's explicit finite element program DYNA3D. Each regression problem imposes both displacement- and force-type boundary conditions to probe the five independent nodal degrees of freedom employed in the targeted formulation. When applicable, the finite element results are compared with small-strain linear-elastic closed-form reference solutions to verify select aspects of the formulations implementation. Although all problems in the suite depict the same geometry, material behavior, and loading conditions, each problem represents a unique combination of shell formulation, stabilization method, and integration rule. Collectively, the thirty-six new regression problems in the test suite cover nine different shell formulations, three hourglass stabilization methods, and three families of through-thickness integration rules.

  3. Russian Doll Search for solving Constraint Optimization problems

    SciTech Connect (OSTI)

    Verfaillie, G.; Lemaitre, M.

    1996-12-31

    If the Constraint Satisfaction framework has been extended to deal with Constraint Optimization problems, it appears that optimization is far more complex than satisfaction. One of the causes of the inefficiency of complete tree search methods, like Depth First Branch and Bound, lies in the poor quality of the lower bound on the global valuation of a partial assignment, even when using Forward Checking techniques. In this paper, we introduce the Russian Doll Search algorithm which replaces one search by n successive searches on nested subproblems (n being the number of problem variables), records the results of each search and uses them later, when solving larger subproblems, in order to improve the lower bound on the global valuation of any partial assignment. On small random problems and on large real scheduling problems, this algorithm yields surprisingly good results, which greatly improve as the problems get more constrained and the bandwidth of the used variable ordering diminishes.

  4. Workshops and problems for benchmarking eddy current codes

    SciTech Connect (OSTI)

    Turner, L.R.; Davey, K.; Ida, N.; Rodger, D.; Kameari, A.; Bossavit, A.; Emson, C.R.I.

    1988-08-01

    A series of six workshops was held in 1986 and 1987 to compare eddy current codes, using six benchmark problems. The problems included transient and steady-state ac magnetic fields, close and far boundary conditions, magnetic and non-magnetic materials. All the problems were based either on experiments or on geometries that can be solved analytically. The workshops and solutions to the problems are described. Results show that many different methods and formulations give satisfactory solutions, and that in many cases reduced dimensionality or coarse discretization can give acceptable results while reducing the computer time required. A second two-year series of TEAM (Testing Electromagnetic Analysis Methods) workshops, using six more problems, is underway. 12 refs., 15 figs., 4 tabs.

  5. Color tuning of light-emitting-diodes by modulating the concentration of red-emitting silicon nanocrystal phosphors

    SciTech Connect (OSTI)

    Barillaro, G. Strambini, L. M.

    2014-03-03

    Luminescent forms of nanostructured silicon have received significant attention in the context of quantum-confined light-emitting devices thanks to size-tunable emission wavelength and high-intensity photoluminescence, as well as natural abundance, low cost, and non-toxicity. Here, we show that red-emitting silicon nanocrystal (SiN) phosphors, obtained by electrochemical erosion of silicon, allow for effectively tuning the color of commercial light-emitting-diodes (LEDs) from blue to violet, magenta, and red, by coating the LED with polydimethylsiloxane encapsulating different SiN concentrations. High reliability of the tuning process, with respect to SiN fabrication and concentration, and excellent stability of the tuning color, with respect to LED bias current, is demonstrated through simultaneous electrical/optical characterization of SiN-modified commercial LEDs, thus envisaging exciting perspectives for silicon nanocrystals in the field of light-emitting applications.

  6. SDSS J001641-000925: THE FIRST STABLE RED DWARF CONTACT BINARY WITH A CLOSE-IN STELLAR COMPANION

    SciTech Connect (OSTI)

    Qian, S.-B.; Jiang, L.-Q.; Zhu, L.-Y.; Zhao, E. G.; He, J.-J.; Liao, W.-P.; Wang, J.-J.; Liu, L.; Zhou, X.; Liu, N. P.; Fernández Lajús, E.; Soonthornthum, B.; Rattanasoon, S.; Aukkaravittayapun, S.

    2015-01-10

    SDSS J001641-000925 is the first red dwarf contact binary star with an orbital period of 0.19856 days that is one of the shortest known periods among M-dwarf binary systems. The orbital period was detected to be decreasing rapidly at a rate of P-dot ∼8 s yr{sup −1}. This indicated that SDSS J001641-000925 was undergoing coalescence via a dynamical mass transfer or loss and thus this red dwarf contact binary is dynamically unstable. To understand the properties of the period change, we monitored the binary system photometrically from 2011 September 2 to 2014 October 1 by using several telescopes in the world and 25 eclipse times were determined. It is discovered that the rapid decrease of the orbital period is not true. This is contrary to the prediction that the system is merging driven by rapid mass transfer or loss. Our preliminary analysis suggests that the observed minus calculated (O–C) diagram shows a cyclic oscillation with an amplitude of 0.00255 days and a period of 5.7 yr. The cyclic variation can be explained by the light travel time effect via the presence of a cool stellar companion with a mass of M {sub 3}sin i' ∼ 0.14 M {sub ☉}. The orbital separation between the third body and the central binary is about 2.8 AU. These results reveal that the rarity of red dwarf contact binaries could not be explained by rapidly dynamical destruction and the presence of the third body helps to form the red dwarf contact binary.

  7. Engineering ESPT Pathways Based on Structural Analysis of LSSmKate Red Fluorescent Proteins with Large Stokes Shift

    SciTech Connect (OSTI)

    Piatkevich, K.; Malashkevich, V; Almo, S; Verkhusha, V

    2010-01-01

    LSSmKate1 and LSSmKate2 are monomeric red fluorescent proteins (RFPs) with large Stokes shifts (LSSs), which allows for efficient separation of absorbance and emission maxima, as well as for excitation with conventional two-photon laser sources. These LSSmKates differ by a single amino acid substitution at position 160 and exhibit absorbance maxima around 460 nm, corresponding to a neutral DsRed-like chromophore. However, excitation at 460 nm leads to fluorescence emission above 600 nm. Structures of LSSmKate1 and LSSmKate2, determined at resolutions of 2.0 and 1.5 {angstrom}, respectively, revealed that the predominant DsRed-chromophore configurations are cis for LSSmKate1 but trans for LSSmKate2. Crystallographic and mutagenesis analyses, as well as isotope and temperature dependences, suggest that an excited-state proton transfer (ESPT) is responsible for the LSSs observed in LSSmKates. Hydrogen bonding between the chromophore hydroxyl and Glu160 in LSSmKate1 and a proton relay involving the chromophore tyrosine hydroxyl, Ser158, and the Asp160 carboxylate in LSSmKate2 represent the putative ESPT pathways. Comparisons with mKeima LSS RFP suggest that similar proton relays could be engineered in other FPs. Accordingly, we mutated positions 158 and 160 in several conventional red-shifted FPs, including mNeptune, mCherry, mStrawberry, mOrange, and mKO, and the resulting FP variants exhibited LSS fluorescence emission in a wide range of wavelengths from 560 to 640 nm. These data suggest that different chromophores formed by distinct tripeptides in different environments can be rationally modified to yield RFPs with novel photochemical properties.

  8. Rotational and radial velocities of 1.3-2.2 M {sub ☉} red giants in open clusters

    SciTech Connect (OSTI)

    Carlberg, Joleen K.

    2014-06-01

    This study presents the rotational distribution of red giant (RG) stars in 11 old to intermediate age open clusters. The masses of these stars are all above the Kraft break, so they lose negligible amounts of their birth angular momentum (AM) during the main-sequence (MS) evolution. However, they do span a mass range with quite different AM distributions imparted during formation, with the stars less massive than ∼1.6M {sub ☉} arriving on the MS with lower rotation rates than the more massive stars. The majority of RGs in this study are slow rotators across the entire red giant branch regardless of mass, supporting the picture that intermediate-mass stars rapidly spin down when they evolve off the MS and develop convection zones capable of driving a magnetic dynamo. Nevertheless, a small fraction of RGs in open clusters show some level of enhanced rotation, and faster rotators are as common in these clusters as in the field RG population. Most of these enhanced rotators appear to be red clump stars, which is also true of the underlying stellar sample, while others are clearly RGs that are above or below the clump. In addition to rotational velocities, the radial velocities (RVs) and membership probabilities of individual stars are also presented. Cluster heliocentric RVs for NGC 6005 and Pismis 18 are reported for the first time.

  9. Various forms of indexing HDMR for modelling multivariate classification problems

    SciTech Connect (OSTI)

    Aksu, a?r?; Tunga, M. Alper

    2014-12-10

    The Indexing HDMR method was recently developed for modelling multivariate interpolation problems. The method uses the Plain HDMR philosophy in partitioning the given multivariate data set into less variate data sets and then constructing an analytical structure through these partitioned data sets to represent the given multidimensional problem. Indexing HDMR makes HDMR be applicable to classification problems having real world data. Mostly, we do not know all possible class values in the domain of the given problem, that is, we have a non-orthogonal data structure. However, Plain HDMR needs an orthogonal data structure in the given problem to be modelled. In this sense, the main idea of this work is to offer various forms of Indexing HDMR to successfully model these real life classification problems. To test these different forms, several well-known multivariate classification problems given in UCI Machine Learning Repository were used and it was observed that the accuracy results lie between 80% and 95% which are very satisfactory.

  10. Primer on Use of Multi-Spectral and Infra Red Imaging for On-Site Inspections

    SciTech Connect (OSTI)

    Henderson, J R

    2010-10-26

    The purpose of an On-Site Inspection (OSI) is to determine whether a nuclear explosion has occurred in violation of the Comprehensive Nuclear Test Ban Treaty (CTBT), and to gather information which might assist in identifying the violator (CTBT, Article IV, Paragraph 35) Multi-Spectral and Infra Red Imaging (MSIR) is allowed by the treaty to detect observables which might help reduce the search area and thus expedite an OSI and make it more effective. MSIR is permitted from airborne measurements, and at and below the surface to search for anomalies and artifacts (CTBT, Protocol, Part II, Paragraph 69b). The three broad types of anomalies and artifacts MSIR is expected to be capable of observing are surface disturbances (disturbed earth, plant stress or anomalous surface materials), human artifacts (man-made roads, buildings and features), and thermal anomalies. The purpose of this Primer is to provide technical information on MSIR relevant to its use for OSI. It is expected that this information may be used for general background information, to inform decisions about the selection and testing of MSIR equipment, to develop operational guidance for MSIR use during an OSI, and to support the development of a training program for OSI Inspectors. References are provided so readers can pursue a topic in more detail than the summary information provided here. The following chapters will provide more information on how MSIR can support an OSI (Section 2), a short summary what Multi-Spectral Imaging and Infra Red Imaging is (Section 3), guidance from the CTBT regarding the use of MSIR (Section 4), and a description of several nuclear explosion scenarios (Section 5) and consequent observables (Section 6). The remaining sections focus on practical aspects of using MSIR for an OSI, such as specification and selection of MSIR equipment, operational considerations for deployment of MISR equipment from an aircraft, and the conduct of field exercises to mature MSIR for an OSI

  11. EVIDENCE FOR (AND AGAINST) PROGENITOR BIAS IN THE SIZE GROWTH OF COMPACT RED GALAXIES

    SciTech Connect (OSTI)

    Keating, Stephanie K.; Abraham, Roberto G.; Schiavon, Ricardo; Graves, Genevieve; Damjanov, Ivana; Yan, Renbin; Newman, Jeffrey; Simard, Luc

    2015-01-01

    Most massive, passive galaxies are compact at high redshifts, but similarly compact massive galaxies are rare in the local universe. The most common interpretation of this phenomenon is that massive galaxies have grown in size by a factor of about five since redshift z = 2. An alternative explanation is that recently quenched massive galaxies are larger (a {sup p}rogenitor bias{sup )}. In this paper, we explore the importance of progenitor bias by looking for systematic differences in the stellar populations of compact early-type galaxies in the DEEP2 survey as a function of size. Our analysis is based on applying the statistical technique of bootstrap resampling to constrain differences in the median ages of our samples and to begin to characterize the distribution of stellar populations in our co-added spectra. The light-weighted ages of compact early-type galaxies at redshifts 0.5 < z < 1.4 are compared to those of a control sample of larger galaxies at similar redshifts. We find that massive compact early-type galaxies selected on the basis of red color and high bulge-to-total ratio are younger than similarly selected larger galaxies, suggesting that size growth in these objects is not driven mainly by progenitor bias, and that individual galaxies grow as their stellar populations age. However, compact early-type galaxies selected on the basis of image smoothness and high bulge-to-total ratio are older than a control sample of larger galaxies. Progenitor bias will play a significant role in defining the apparent size changes of early-type galaxies if they are selected on the basis of the smoothness of their light distributions.

  12. PLANET ENGULFMENT BY {approx}1.5-3 M{sub sun} RED GIANTS

    SciTech Connect (OSTI)

    Kunitomo, M.; Ikoma, M.; Sato, B.; Ida, S.; Katsuta, Y.

    2011-08-20

    Recent radial-velocity surveys for GK clump giants have revealed that planets also exist around {approx}1.5-3 M{sub sun} stars. However, no planets have been found inside 0.6 AU around clump giants, in contrast to solar-type main-sequence stars, many of which harbor short-period planets such as hot Jupiters. In this study, we examine the possibility that planets were engulfed by host stars evolving on the red-giant branch (RGB). We integrate the orbital evolution of planets in the RGB and helium-burning phases of host stars, including the effects of stellar tide and stellar mass loss. Then we derive the critical semimajor axis (or the survival limit) inside which planets are eventually engulfed by their host stars after tidal decay of their orbits. Specifically, we investigate the impact of stellar mass and other stellar parameters on the survival limit in more detail than previous studies. In addition, we make detailed comparisons with measured semimajor axes of planets detected so far, which no previous study has done. We find that the critical semimajor axis is quite sensitive to stellar mass in the range between 1.7 and 2.1 M{sub sun}, which suggests a need for careful comparison between theoretical and observational limits of the existence of planets. Our comparison demonstrates that all planets orbiting GK clump giants that have been detected are beyond the survival limit, which is consistent with the planet-engulfment hypothesis. However, on the high-mass side (>2.1M{sub sun}), the detected planets are orbiting significantly far from the survival limit, which suggests that engulfment by host stars may not be the main reason for the observed lack of short-period giant planets. To confirm our conclusion, the detection of more planets around clump giants, especially with masses {approx}> 2.5M{sub sun}, is required.

  13. THE RED SUPERGIANT PROGENITOR OF SUPERNOVA 2012aw (PTF12bvh) IN MESSIER 95

    SciTech Connect (OSTI)

    Van Dyk, Schuyler D. [Spitzer Science Center/Caltech, Mailcode 220-6, Pasadena, CA 91125 (United States); Cenko, S. Bradley; Filippenko, Alexei V., E-mail: vandyk@ipac.caltech.edu, E-mail: cenko@berkeley.edu, E-mail: afilippenko@berkeley.edu [Department of Astronomy, University of California, Berkeley, CA 94720-3411 (United States); and others

    2012-09-10

    We report on the direct detection and characterization of the probable red supergiant (RSG) progenitor of the intermediate-luminosity Type II-Plateau (II-P) supernova (SN) 2012aw in the nearby (10.0 Mpc) spiral galaxy Messier 95 (M95; NGC 3351). We have identified the star in both Hubble Space Telescope images of the host galaxy, obtained 17-18 yr prior to the explosion, and near-infrared ground-based images, obtained 6-12 yr prior to the SN. The luminous supergiant showed evidence for substantial circumstellar dust, manifested as excess line-of-sight extinction. The effective total-to-selective ratio of extinction to the star was R'{sub V} Almost-Equal-To 4.35, which is significantly different from that of diffuse interstellar dust (i.e., R{sub V} = 3.1), and the total extinction to the star was therefore, on average, A{sub V} Almost-Equal-To 3.1 mag. We find that the observed spectral energy distribution for the progenitor star is consistent with an effective temperature of 3600 K (spectral type M3), and that the star therefore had a bolometric magnitude of -8.29. Through comparison with recent theoretical massive-star evolutionary tracks we can infer that the RSG progenitor had an initial mass 15 {approx}< M{sub ini}(M{sub Sun }) < 20. Interpolating by eye between the available tracks, we surmise that the star had initial mass {approx}17-18 M{sub Sun }. The circumstellar dust around the progenitor must have been destroyed in the explosion, as the visual extinction to the SN is found to be low (A{sub V} = 0.24 mag with R{sub V} = 3.1).

  14. CHEMICAL ABUNDANCE ANALYSIS OF A NEUTRON-CAPTURE ENHANCED RED GIANT IN THE BULGE PLAUT FIELD

    SciTech Connect (OSTI)

    Johnson, Christian I.; Rich, R. Michael [Department of Physics and Astronomy, UCLA, 430 Portola Plaza, Box 951547, Los Angeles, CA 90095-1547 (United States)] [Department of Physics and Astronomy, UCLA, 430 Portola Plaza, Box 951547, Los Angeles, CA 90095-1547 (United States); McWilliam, Andrew, E-mail: cijohnson@astro.ucla.edu, E-mail: rmr@astro.ucla.edu, E-mail: cjohnson@cfa.harvard.edu, E-mail: andy@obs.carnegiescience.edu [Observatories of the Carnegie Institution of Washington, Pasadena, CA 91101 (United States)] [Observatories of the Carnegie Institution of Washington, Pasadena, CA 91101 (United States)

    2013-09-20

    We present chemical abundances for 27 elements ranging from oxygen to erbium in the metal-poor ([Fe/H] = 1.67) bulge red giant branch star 2MASS 18174532-3353235. The results are based on equivalent width and spectrum synthesis analyses of a high-resolution (R ? 30, 000) spectrum obtained with the Magellan-MIKE spectrograph. While the light (Z ?< 30) element abundance patterns match those of similar metallicity bulge and halo stars, the strongly enhanced heavy element abundances are more similar to 'r-II' halo stars (e.g., CS 22892-052) typically found at [Fe/H] ?< 2.5. We find that the heaviest elements (Z ? 56) closely follow the scaled-solar r-process abundance pattern. We do not find evidence supporting significant s-process contributions; however, the intermediate mass elements (e.g., Y and Zr) appear to have been produced through a different process than the heaviest elements. The light and heavy element abundance patterns of 2MASS 18174532-3353235 are in good agreement with the more metal-poor r-process enhanced stars CS 22892-052 and BD +17{sup o}3248. 2MASS 18174532-3353235 also shares many chemical characteristics with the similar metallicity but comparatively ?-poor Ursa Minor dwarf galaxy giant COS 82. Interestingly, the Mo and Ru abundances of 2MASS 18174532-3353235 are also strongly enhanced and follow a similar trend recently found to be common in moderately metal-poor main-sequence turn-off halo stars.

  15. Fish debris record the hydrothermal activity in the Atlantis II deep sediments (Red Sea)

    SciTech Connect (OSTI)

    Oudin, E.; Cocherie, A.

    1988-01-01

    The REE and U, Th, Zr, Hf, Sc have been analyzed in samples from Atlantis II and Shaban/Jean Charcot Deeps in the Red Sea. The high Zr/Hf ratio in some sediments indicates the presence of fish debris or of finely crystallized apatite. The positive ..sigma..REE vs P/sub 2/O/sub 5/ and ..sigma..REE vs Zr/Hf correlations show that fish debris and finely crystallized apatite are the main REE sink in Atlantis II Deep sediments as in other marine environments. The hydrothermal sediments and the fish debris concentrates have similar REE patterns, characterized by a LREE enrichment and a large positive Eu anomaly. This REE pattern is also observed in E.P.R. hydrothermal solutions. Fish debris from marine environments acquire their REE content and signature mostly from sea water during early diagenesis. The hydrothermal REE signature of Atlantis II Deep fish debris indicate that they probably record the REE signature of their hydrothermal sedimentation and diagenetic environment. The different REE signatures of the Shaban/Jean Charcot and Atlantis II Deep hydrothermal sediments suggest a sea water-dominated brine in the Shaban/Jean Charcot Deep as opposed to the predominantly hydrothermal brine in Atlantis II Deep. Atlantis II Deep fish debris are also characterized by their high U but low Th contents. Their low Th contents probably reflect the low Th content of the various possible sources (sea water, brine, sediments). Their U contents are probably controlled by the redox conditions of sedimentation.

  16. X-ray observation of the shocked red supergiant wind of Cassiopeia A

    SciTech Connect (OSTI)

    Lee, Jae-Joon; Park, Sangwook; Hughes, John P.; Slane, Patrick O.

    2014-07-01

    Cas A is a Galactic supernova remnant whose supernova explosion is observed to be of Type IIb from spectroscopy of its light echo. Having its SN type known, observational constraints on the mass-loss history of Cas A's progenitor can provide crucial information on the final fate of massive stars. In this paper, we study X-ray characteristics of the shocked ambient gas in Cas A using the 1 Ms observation carried out with the Chandra X-Ray Observatory and try to constrain the mass-loss history of the progenitor star. We identify thermal emission from the shocked ambient gas along the outer boundary of the remnant. Comparison of measured radial variations of spectroscopic parameters of the shocked ambient gas to the self-similar solutions of Chevalier show that Cas A is expanding into a circumstellar wind rather than into a uniform medium. We estimate a wind density n {sub H} ? 0.9 0.3 cm{sup 3} at the current outer radius of the remnant (?3 pc), which we interpret as a dense slow wind from a red supergiant (RSG) star. Our results suggest that the progenitor star of Cas A had an initial mass around 16 M {sub ?}, and its mass before the explosion was about 5 M {sub ?}, with uncertainties of several tens of percent. Furthermore, the results suggest that, among the mass lost from the progenitor star (?11 M {sub ?}), a significant amount (more than 6 M {sub ?}) could have been via its RSG wind.

  17. Red giant stars from Sloan Digital Sky Survey. I. The general field

    SciTech Connect (OSTI)

    Chen, Y. Q.; Zhao, G.; Carrell, K.; Zhao, J. K.; Tan, K. F.; Nissen, P. E.; Wei, P. E-mail: pen@phys.au.dk

    2014-11-01

    We have obtained a sample of ∼22,000 red giant branch (RGB) stars based on stellar parameters, provided by the ninth data release of the Sloan Digital Sky Survey, and the CH(G)/MgH indices, measured from the included spectra. The Galactic rest-frame velocity of V {sub gsr} versus longitude for the sample shows the existence of several groups of stars from globular clusters and known streams. Excluding these substructures, a sample of ∼16,000 RGB stars from the general field is used to investigate the properties of the thick disk, the inner halo, and the outer halo of our Galaxy. The metallicity and rotational velocity distributions are investigated for stars at 0 kpc < |Z| < 10 kpc. It is found that the canonical thick disk dominates at 0 kpc < |Z| < 2 kpc and its contribution becomes negligible at |Z| > 3 kpc. The MWTD is present and overlaps with the inner halo at 1 kpc < |Z| < 3 kpc. The inner halo starts at 2 kpc < |Z| < 3 kpc and becomes the dominated population for 4 kpc < |Z| < 10 kpc. For halo stars with |Z| > 5 kpc, bimodal metallicity distributions are found for 20 kpc < |Z| < 25 kpc and 35 kpc < RR < 45 kpc, which suggests a dual halo, the inner and the outer halo, as reported in Carollo et al. at low |Z| values. The peak of metallicity for the inner halo is at [Fe/H] ∼ –1.6 and appears to be at [Fe/H] ∼ –2.3 for the outer halo. The transition point from the inner to the outer halo is located at |Z| ∼ 20 kpc and RR ∼ 35 kpc.

  18. Genetic stratigraphy and reservoir characterization of the Spiro sandstone, Red Oak Field, Arkoma Basin, southeastern Oklahoma

    SciTech Connect (OSTI)

    Horn, B.W. )

    1996-01-01

    The Lower Atokan Spiro sandstone is a mixed carbonate-silicilastic reservoir that produces hydrocarbons from three discrete stratigraphic intervals at the Red Oak Field. Reservoir-quality sandstones develop in the seaward stepping sub-Spiro sequence (highstand system tract), landward stepping Foster [open quote]channel,[close quotes] and upper Spiro depositional sequences (transgressive and highstand system tract). The sub-Spiro and Foster [open quote]channel[close quote] sequences are separated by regional unconformity interpreted as a sequence boundary. Regressive marine shoreface cycles, genetically related to the sub-Spiro shale, comprise the lowermost producing interval. Fluvial/estuarine valley-fill (Foster channel) sandstones progressively onlap the sequence boundary overlying the regressive shoreface cycles and juxtapose reservoir-quality sandstones of different sequences, creating a complex reservoir architecture. Upper Spiro reservoir sandstones are developed within marine shoreface cycles that are deposited in a landward-stepping succession (highstand systems tract) following the drowning of incised paleovalleys. These aggradational / retrogradational successions downlap onto the valley-fill and sub-Spiro sequences representing the final stages of Spiro deposition prior to the high stand of sea level during Middle Atokan time. Regional stratigraphic correlations demonstrate progressive basinward truncation of the sub-Spiro regressive shoreface cycles by an erosional surface, creating a network of incised paleovalleys across the Pennsylvanian shelf. Based on core, well log, and outcrop interpretations, the magnitude of the facies offset across this sequence boundary indicates that a significant volume of reservoir-quality sediment has been partitioned basinward of the current producing areas.

  19. Monomeric [alpha]-Synuclein Binds Congo Red Micelles in a Disordered Manner

    SciTech Connect (OSTI)

    Maltsev, Alexander S.; Grishaev, Alexander; Bax, Ad

    2012-03-15

    The histological dye Congo Red (CR) previously has been shown to inhibit {alpha}-synuclein (aS) fibrillation, but the mode of this inhibition remained unclear. Because of favorable exchange kinetics, interaction between CR and aS lends itself to a detailed nuclear magnetic resonance study, and relaxation dispersion measurements yield the bound fraction and time scales for the interaction of aS with CR. We find that at pH 6, CR exists as a micelle, and at a CR:aS molar ratio of {approx}1, only a small fraction of aS ({approx}2%) is bound to these micelles. Rapid exchange (k{sub ex} {approx} 3000 s{sup -1}) between the free and CR-bound states broadens and strongly attenuates resonances of aS by two processes: a magnetic field-dependent contribution, caused by the chemical shift difference between the two states, and a nearly field-independent contribution caused by slower tumbling of aS bound to the CR micelle. The salt dependence of the interaction suggests a predominantly electrostatic mechanism for the 60 N-terminal residues, while the weaker interaction between residues 61-100 and CR is mostly hydrophobic. Chemical shift and transferred NOE data indicate that aS becomes slightly more helical but remains largely disordered when bound to CR. Results indicate that inhibition of fibril formation does not result from binding of CR to free aS and, therefore, must result from interaction of aS fibrils or protofibrils with CR micelles.

  20. Systematic review of the influence of foraging habitat on red-cockaded woodpecker reproductive success.

    SciTech Connect (OSTI)

    Garabedian, James E.

    2014-04-01

    Relationships between foraging habitat and reproductive success provide compelling evidence of the contribution of specific vegetative features to foraging habitat quality, a potentially limiting factor for many animal populations. For example, foraging habitat quality likely will gain importance in the recovery of the threatened red-cockaded woodpecker Picoides borealis (RCW) in the USA as immediate nesting constraints are mitigated. Several researchers have characterized resource selection by foraging RCWs, but emerging research linking reproductive success (e.g. clutch size, nestling and fledgling production, and group size) and foraging habitat features has yet to be synthesized. Therefore, we reviewed peer-refereed scientific literature and technical resources (e.g. books, symposia proceedings, and technical reports) that examined RCW foraging ecology, foraging habitat, or demography to evaluate evidence for effects of the key foraging habitat features described in the species’ recovery plan on group reproductive success. Fitness-based habitat models suggest foraging habitat with low to intermediate pine Pinus spp. densities, presence of large and old pines, minimal midstory development, and herbaceous groundcover support more productive RCW groups. However, the relationships between some foraging habitat features and RCW reproductive success are not well supported by empirical data. In addition, few regression models account for > 30% of variation in reproductive success, and unstandardized multiple and simple linear regression coefficient estimates typically range from -0.100 to 0.100, suggesting ancillary variables and perhaps indirect mechanisms influence reproductive success. These findings suggest additional research is needed to address uncertainty in relationships between foraging habitat features and RCW reproductive success and in the mechanisms underlying those relationships.

  1. Nonlinear eigenvalue problems in Density Functional Theory calculations

    SciTech Connect (OSTI)

    Fattebert, J

    2009-08-28

    Developed in the 1960's by W. Kohn and coauthors, Density Functional Theory (DFT) is a very popular quantum model for First-Principles simulations in chemistry and material sciences. It allows calculations of systems made of hundreds of atoms. Indeed DFT reduces the 3N-dimensional Schroedinger electronic structure problem to the search for a ground state electronic density in 3D. In practice it leads to the search for N electronic wave functions solutions of an energy minimization problem in 3D, or equivalently the solution of an eigenvalue problem with a non-linear operator.

  2. Robust Consumption-Investment Problem on Infinite Horizon

    SciTech Connect (OSTI)

    Zawisza, Dariusz

    2015-12-15

    In our paper we consider an infinite horizon consumption-investment problem under a model misspecification in a general stochastic factor model. We formulate the problem as a stochastic game and finally characterize the saddle point and the value function of that game using an ODE of semilinear type, for which we provide a proof of an existence and uniqueness theorem for its solution. Such equation is interested on its own right, since it generalizes many other equations arising in various infinite horizon optimization problems.

  3. A Schwarz alternating procedure for singular perturbation problems

    SciTech Connect (OSTI)

    Garbey, M.; Kaper, H.G.

    1994-12-31

    The authors show that the Schwarz alternating procedure offers a good algorithm for the numerical solution of singular perturbation problems, provided the domain decomposition is properly designed to resolve the boundary and transition layers. They give sharp estimates for the optimal position of the domain boundaries and present convergence rates of the algorithm for various second-order singular perturbation problems. The splitting of the operator is domain-dependent, and the iterative solution of each subproblem is based on a modified asymptotic expansion of the operator. They show that this asymptotic-induced method leads to a family of efficient massively parallel algorithms and report on implementation results for a turning-point problem and a combustion problem.

  4. Domain decomposition methods for solving an image problem

    SciTech Connect (OSTI)

    Tsui, W.K.; Tong, C.S.

    1994-12-31

    The domain decomposition method is a technique to break up a problem so that ensuing sub-problems can be solved on a parallel computer. In order to improve the convergence rate of the capacitance systems, pre-conditioned conjugate gradient methods are commonly used. In the last decade, most of the efficient preconditioners are based on elliptic partial differential equations which are particularly useful for solving elliptic partial differential equations. In this paper, the authors apply the so called covering preconditioner, which is based on the information of the operator under investigation. Therefore, it is good for various kinds of applications, specifically, they shall apply the preconditioned domain decomposition method for solving an image restoration problem. The image restoration problem is to extract an original image which has been degraded by a known convolution process and additive Gaussian noise.

  5. ALCF's new data science program targets "big data" problems ...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ALCF's new data science program targets "big data" problems Author: Laura Wolf April 1, 2016 Facebook Twitter LinkedIn Google E-mail Printer-friendly version The Argonne Leadership ...

  6. Accelerating PDE-Constrained Optimization Problems using Adaptive...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Accelerating PDE-Constrained Optimization Problems using Adaptive Reduced-Order Models January 15, 2016 10:30AM to 11:30AM Presenter Matthew Zahr, Wilkinson Interviewee Location...

  7. Simulation and Analysis of Converging Shock Wave Test Problems

    SciTech Connect (OSTI)

    Ramsey, Scott D.; Shashkov, Mikhail J.

    2012-06-21

    Results and analysis pertaining to the simulation of the Guderley converging shock wave test problem (and associated code verification hydrodynamics test problems involving converging shock waves) in the LANL ASC radiation-hydrodynamics code xRAGE are presented. One-dimensional (1D) spherical and two-dimensional (2D) axi-symmetric geometric setups are utilized and evaluated in this study, as is an instantiation of the xRAGE adaptive mesh refinement capability. For the 2D simulations, a 'Surrogate Guderley' test problem is developed and used to obviate subtleties inherent to the true Guderley solution's initialization on a square grid, while still maintaining a high degree of fidelity to the original problem, and minimally straining the general credibility of associated analysis and conclusions.

  8. "Upcycling": A Green Solution to the Problem of Plastic - Energy...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Find More Like This Return to Search "Upcycling": A Green Solution to the Problem of ... At Argonne, chemist Vilas Pol has devised an environmentally green method that breaks down ...

  9. The problem of living in a world contaminated with chemicals

    SciTech Connect (OSTI)

    Metcalf, R.L.

    1990-12-31

    The proliferation of xenobiotic chemicals in the global environment poses living problems for each of us aboard {open_quotes}spaceship earth.{close_quotes} Seven case studies are presented that illustrate the magnitude of the problem that can result from waiting to identify toxic hazards until there have been decades of {open_quotes}human guinea pig{close_quotes} exposure. 25 refs., 5 tabs.

  10. Capacitated arc routing problem and its extensions in waste collection

    SciTech Connect (OSTI)

    Fadzli, Mohammad; Najwa, Nurul; Luis, Martino

    2015-05-15

    Capacitated arc routing problem (CARP) is the youngest generation of graph theory that focuses on solving the edge/arc routing for optimality. Since many years, operational research devoted to CARP counterpart, known as vehicle routing problem (VRP), which does not fit to several real cases such like waste collection problem and road maintenance. In this paper, we highlighted several extensions of capacitated arc routing problem (CARP) that represents the real-life problem of vehicle operation in waste collection. By purpose, CARP is designed to find a set of routes for vehicles that satisfies all pre-setting constraints in such that all vehicles must start and end at a depot, service a set of demands on edges (or arcs) exactly once without exceeding the capacity, thus the total fleet cost is minimized. We also addressed the differentiation between CARP and VRP in waste collection. Several issues have been discussed including stochastic demands and time window problems in order to show the complexity and importance of CARP in the related industry. A mathematical model of CARP and its new version is presented by considering several factors such like delivery cost, lateness penalty and delivery time.

  11. Geothermal drilling problems and their impact on cost

    SciTech Connect (OSTI)

    Carson, C.C.

    1982-01-01

    Historical data are presented that demonstrate the significance of unexpected problems. In extreme cases, trouble costs are the largest component of well costs or severe troubles can lead to abandonment of a hole. Drilling experiences from US geothermal areas are used to analyze the frequency and severity of various problems. In addition, average trouble costs are estimated based on this analysis and the relationship between trouble and depth is discussed. The most frequent drilling and completion problem in geothermal wells is lost circulation. This is especially true for resources in underpressured, fractured formations. Serious loss of circulation can occur during drilling - because of this, the producing portions of many wells are drilled with air or aerated drilling fluid and the resulting corrosion/erosion problems are tolerated - but it can also affect the cementing of well casing. Problems in bonding the casing to the formation result from many other causes as well, and are common in geothermal wells. Good bonds are essential because of the possibility of casing collapse due to thermal cycling during the life of the well. Several other problems are identified and their impacts are quantified and discussed.

  12. Tracing chemical evolution over the extent of the Milky Way's disk with apogee red clump stars

    SciTech Connect (OSTI)

    Nidever, David L.; Bovy, Jo; Bird, Jonathan C.; Andrews, Brett H.; Johnson, Jennifer A.; Weinberg, David H.; Hayden, Michael; Holtzman, Jon; Feuillet, Diane; Majewski, Steven R.; García Pérez, Ana E.; Smith, Verne; Robin, Annie C.; Sobeck, Jennifer; Cunha, Katia; Allende Prieto, Carlos; Zasowski, Gail; Schiavon, Ricardo P.; Schneider, Donald P.; Shetrone, Matthew; and others

    2014-11-20

    We employ the first two years of data from the near-infrared, high-resolution SDSS-III/APOGEE spectroscopic survey to investigate the distribution of metallicity and α-element abundances of stars over a large part of the Milky Way disk. Using a sample of ≈10, 000 kinematically unbiased red-clump stars with ∼5% distance accuracy as tracers, the [α/Fe] versus [Fe/H] distribution of this sample exhibits a bimodality in [α/Fe] at intermediate metallicities, –0.9 < [Fe/H] <–0.2, but at higher metallicities ([Fe/H] ∼+0.2) the two sequences smoothly merge. We investigate the effects of the APOGEE selection function and volume filling fraction and find that these have little qualitative impact on the α-element abundance patterns. The described abundance pattern is found throughout the range 5 < R < 11 kpc and 0 < |Z| < 2 kpc across the Galaxy. The [α/Fe] trend of the high-α sequence is surprisingly constant throughout the Galaxy, with little variation from region to region (∼10%). Using simple galactic chemical evolution models, we derive an average star-formation efficiency (SFE) in the high-α sequence of ∼4.5 × 10{sup –10} yr{sup –1}, which is quite close to the nearly constant value found in molecular-gas-dominated regions of nearby spirals. This result suggests that the early evolution of the Milky Way disk was characterized by stars that shared a similar star-formation history and were formed in a well-mixed, turbulent, and molecular-dominated ISM with a gas consumption timescale (SFE{sup –1}) of ∼2 Gyr. Finally, while the two α-element sequences in the inner Galaxy can be explained by a single chemical evolutionary track, this cannot hold in the outer Galaxy, requiring, instead, a mix of two or more populations with distinct enrichment histories.

  13. ABUNDANCES OF C, N, Sr, AND Ba ON THE RED GIANT BRANCH OF {omega} CENTAURI

    SciTech Connect (OSTI)

    Stanford, Laura M.; Da Costa, G. S.; Norris, John E. E-mail: gdc@mso.anu.edu.a

    2010-05-10

    Abundances relative to iron for carbon, nitrogen, strontium, and barium are presented for 33 stars on the red giant branch (RGB) of the globular cluster {omega} Centauri. They are based on intermediate-resolution spectroscopic data covering the blue spectral region analyzed using spectrum synthesis techniques. The data reveal the existence of a broad range in the abundances of these elements, and a comparison with similar data for main-sequence stars enables insight into the evolutionary history of the cluster. The majority of the RGB stars were found to be depleted in carbon, i.e., [C/Fe] < 0, while [N/Fe] for the same stars shows a range of {approx}1 dex, from [N/Fe] {approx} 0.7 to 1.7 dex. The strontium-to-iron abundance ratios varied from solar to mildly enhanced (0.0 {<=} [Sr/Fe] {<=} 0.8), with [Ba/Fe] generally equal to or greater than [Sr/Fe]. The carbon and nitrogen abundance ratios for the one known CH star in the sample, ROA 279, are [C/Fe] = 0.6 and [N/Fe] = 0.5 dex. Evidence for evolutionary mixing on the RGB is found from the fact that the relative carbon abundances on the main sequence are generally higher than those on the RGB. However, comparison of the RGB and main-sequence samples shows that the upper level of nitrogen enhancement is similar in both sets at [N/Fe] {approx} 2.0 dex. This is most likely the result of primordial rather than evolutionary mixing processes. One RGB star, ROA 276, was found to have Sr and Ba abundance ratios similar to the anomalous Sr-rich main-sequence star S2015448. High-resolution spectra of ROA 276 were obtained with the Magellan Telescope/MIKE spectrograph combination to confirm this result, revealing that ROA 276 is indeed an unusual star. For this star, calculations of the depletion effect, the potential change in surface abundance that results from the increased depth of the convective envelope as a star moves from the main sequence to the RGB, strongly suggest that the observed Sr enhancement in ROA 276 is of

  14. COMPLEXITY & APPROXIMABILITY OF QUANTIFIED & STOCHASTIC CONSTRAINT SATISFACTION PROBLEMS

    SciTech Connect (OSTI)

    H. B. HUNT; M. V. MARATHE; R. E. STEARNS

    2001-06-01

    Let D be an arbitrary (not necessarily finite) nonempty set, let C be a finite set of constant symbols denoting arbitrary elements of D, and let S and T be an arbitrary finite set of finite-arity relations on D. We denote the problem of determining the satisfiability of finite conjunctions of relations in S applied to variables (to variables and symbols in C) by SAT(S) (by SATc(S).) Here, we study simultaneously the complexity of decision, counting, maximization and approximate maximization problems, for unquantified, quantified and stochastically quantified formulas. We present simple yet general techniques to characterize simultaneously, the complexity or efficient approximability of a number of versions/variants of the problems SAT(S), Q-SAT(S), S-SAT(S),MAX-Q-SAT(S) etc., for many different such D,C,S,T. These versions/variants include decision, counting, maximization and approximate maximization problems, for unquantified, quantified and stochastically quantified formulas. Our unified approach is based on the following two basic concepts: (i) strongly-local replacements/reductions and (ii) relational/algebraic representability. Some of the results extend the earlier results in [Pa85,LMP99,CF+93,CF+94] Our techniques and results reported here also provide significant steps towards obtaining dichotomy theorems, for a number of the problems above, including the problems MAX-Q-SAT(S), and MAX-S-SAT(S). The discovery of such dichotomy theorems, for unquantified formulas, has received significant recent attention in the literature [CF+93, CF+94, Cr95, KSW97]. Keywords: NP-hardness; Approximation Algorithms; PSPACE-hardness; Quantified and Stochastic Constraint Satisfaction Problems.

  15. Seismic Velocity Structure and Depth-Dependence of Anisotropy in the Red Sea and Arabian Shield from Surface Wave Analysis

    SciTech Connect (OSTI)

    Hansen, S; Gaherty, J; Schwartz, S; Rodgers, A; Al-Amri, A

    2007-07-25

    We investigate the lithospheric and upper mantle structure as well as the depth-dependence of anisotropy along the Red Sea and beneath the Arabian Peninsula using receiver function constraints and phase velocities of surface waves traversing two transects of stations from the Saudi Arabian National Digital Seismic Network. Frequency-dependent phase delays of fundamental-mode Love and Rayleigh waves, measured using a cross-correlation procedure, require very slow shear velocities and the presence of anisotropy throughout the upper mantle. Linearized inversion of these data produce path-averaged 1D radially anisotropic models with about 4% anisotropy in the lithosphere, increasing to about 4.8% anisotropy across the lithosphere-asthenosphere boundary (LAB). Models with reasonable crustal velocities in which the mantle lithosphere is isotropic cannot satisfy the data. The lithospheric lid, which ranges in thickness from about 70 km near the Red Sea coast to about 90 km beneath the Arabian Shield, is underlain by a pronounced low-velocity zone with shear velocities as low as 4.1 km/s. Forward models, which are constructed from previously determined shear-wave splitting estimates, can reconcile surface and body wave observations of anisotropy. The low shear velocity values are similar to many other continental rift and oceanic ridge environments. These low velocities combined with the sharp velocity contrast across the LAB may indicate the presence of partial melt beneath Arabia. The anisotropic signature primarily reflects a combination of plate- and density-driven flow associated with active rifting processes in the Red Sea.

  16. The inverse problems of wing panel manufacture processes

    SciTech Connect (OSTI)

    Oleinikov, A. I.; Bormotin, K. S.

    2013-12-16

    It is shown that inverse problems of steady-state creep bending of plates in both the geometrically linear and nonlinear formulations can be represented in a variational formulation. Steady-state values of the obtained functionals corresponding to the solutions of the problems of inelastic deformation and springback are determined by applying a finite element procedure to the functionals. Optimal laws of creep deformation are formulated using the criterion of minimizing damage in the functionals of the inverse problems. The formulated problems are reduced to the problems solved by the finite element method using MSC.Marc software. Currently, forming of light metals poses tremendous challenges due to their low ductility at room temperature and their unusual deformation characteristics at hot-cold work: strong asymmetry between tensile and compressive behavior, and a very pronounced anisotropy. We used the constitutive models of steady-state creep of initially transverse isotropy structural materials the kind of the stress state has influence. The paper gives basics of the developed computer-aided system of design, modeling, and electronic simulation targeting the processes of manufacture of wing integral panels. The modeling results can be used to calculate the die tooling, determine the panel processibility, and control panel rejection in the course of forming.

  17. Real time detection and correction of distribution feeder operational problems

    SciTech Connect (OSTI)

    Subramanian, A.K.; Huang, J.C.

    1995-12-31

    The paper presents a new technique that detects and corrects distribution operational problems using closed loop control of substation transformers, capacitors and reactors by an online computer. This allows the distribution system to be operated close to its capacity without sacrificing the quality of power supply. Such operations help defer the additional cost of installing new substations. The technique integrates the Distribution Feeder Analysis (DFA) and the Distribution Substation Control (DSC) functions to achieve this. The DFA function provides the topology and power flow results for the feeders using the substation real time measurements. It does not require feeder section measurements. The realtime feeder results are used in detecting any currently existing feeder operational problems such as feeder section voltages and currents outside their limits. The detected feeder problems are transformed into substation distribution bus objectives and then corrected by the DSC function using controls available at the substation. The DSC function has been performing successfully for several years at Potomac Electric Power Company (PEPCO) in Washington, D.C. It uses a closed loop control scheme that controls the substation transformer taps and shunt capacitor and reactor breakers and optimizes the substation operation. By combining the DFA and DSC functions into a single function and with proper transformation of feeder problems into substation objectives, a new closed loop control scheme for the substation controls is achieved. This scheme corrects the detected feeder problems and optimizes the substation operation. This technique is implemented and tested using the actual substation and feeder models of PEPCO.

  18. Economic penalties of problems and errors in solar energy systems

    SciTech Connect (OSTI)

    Raman, K.; Sparkes, H.R.

    1983-01-01

    Experience with a large number of installed solar energy systems in the HUD Solar Program has shown that a variety of problems and design/installation errors have occurred in many solar systems, sometimes resulting in substantial additional costs for repair and/or replacement. In this paper, the effect of problems and errors on the economics of solar energy systems is examined. A method is outlined for doing this in terms of selected economic indicators. The method is illustrated by a simple example of a residential solar DHW system. An example of an installed, instrumented solar energy system in the HUD Solar Program is then discussed. Detailed results are given for the effects of the problems and errors on the cash flow, cost of delivered heat, discounted payback period, and life-cycle cost of the solar energy system. Conclusions are drawn regarding the most suitable economic indicators for showing the effects of problems and errors in solar energy systems. A method is outlined for deciding on the maximum justifiable expenditure for maintenance on a solar energy system with problems or errors.

  19. Integration of Long-Term Research into a GIS Based Landscape Habitat Model for the Red-Cockaded Woodpecker

    SciTech Connect (OSTI)

    Franzreb, K.; Lloyd, F.T.

    2000-10-01

    The red cockaded woodpecker has been intensively studied since 1985 when the population was on the verge of extinction. The population decline is primarily the result of timber harvesting prior to 1950 and restricted burning. Construction of artificial cavities, translocations, competitor control, and removal of hardwood mid-story has provided suitable habitat. Since 1985, the population has increased from 4 to 99 birds. A GIS model is being developed to simulate the development of habitat at SRS in relation to management and existing vegetation.

  20. Low Power, Red, Green and Blue Carbon Nanotube Enabled Vertical Organic Light Emitting Transistors for Active Matrix OLED Displays

    SciTech Connect (OSTI)

    McCarthy, M. A. [University of Florida, Gainesville; Liu, B. [University of Florida, Gainesville; Donoghue, E. P. [University of Florida, Gainesville; Kravchenko, Ivan I [ORNL; Kim, D. Y. [University of Florida, Gainesville; So, Franky [University of Florida, Gainesville; Rinzler, A. G. [University of Florida, Gainesville

    2011-01-01

    Organic semiconductors are potential alternatives to polycrystalline silicon as the semiconductor used in the backplane of active matrix organic light emitting diode displays. Demonstrated here is a light-emitting transistor with an organic channel, operating with low power dissipation at low voltage, and high aperture ratio, in three colors: red, green and blue. The single-wall carbon nanotube network source electrode is responsible for the high level of performance demonstrated. A major benefit enabled by this architecture is the integration of the drive transistor, storage capacitor and light emitter into a single device. Performance comparable to commercialized polycrystalline-silicon TFT driven OLEDs is demonstrated.

  1. Cosmological moduli problem in large volume scenario and thermal inflation

    SciTech Connect (OSTI)

    Choi, Kiwoon; Park, Wan-Il; Shin, Chang Sub E-mail: wipark@kias.re.kr

    2013-03-01

    We show that in a large volume scenario of type IIB string or F-theory compactifications, single thermal inflation provides only a partial solution to the cosmological problem of the light volume modulus. We then clarify the conditions for double thermal inflation, being a simple extension of the usual single thermal inflation scenario, to solve the cosmological moduli problem in the case of relatively light moduli masses. Using a specific example, we demonstrate that double thermal inflation can be realized in large volume scenario in a natural manner, and the problem of the light volume modulus can be solved for the whole relevant mass range. We also find that right amount of baryon asymmetry and dark matter can be obtained via a late-time Affleck-Dine mechanism and the decays of the visible sector NLSP to flatino LSP.

  2. A survey of problems in divertor and edge plasma theory

    SciTech Connect (OSTI)

    Boozer, A. ); Braams, B.; Weitzner, H. . Courant Inst. of Mathematical Sciences); Cohen, R. ); Hazeltine, R. . Inst. for Fusion Studies); Hinton, F. ); Houlberg, W. (Oak

    1992-12-22

    Theoretical physics problems related to divertor design are presented, organized by the region in which they occur. Some of the open questions in edge physics are presented from a theoretician's point of view. After a cursory sketch of the fluid models of the edge plasma and their numerical realization, the following topics are taken up: time-dependent problems, non-axisymmetric effects, anomalous transport in the scrape-off layer, edge kinetic theory, sheath effects and boundary conditions in divertors, electric field effects, atomic and molecular data issues, impurity transport in the divertor region, poloidally localized power dissipation (MARFEs and dense gas targets), helium ash removal, and neutral transport. The report ends with a summary of selected problems of particular significance and a brief bibliography of survey articles and related conference proceedings.

  3. A survey of problems in divertor and edge plasma theory

    SciTech Connect (OSTI)

    Boozer, A.; Braams, B.; Weitzner, H.; Cohen, R.; Hazeltine, R.; Hinton, F.; Houlberg, W.; Oktay, E.; Sadowski, W.; Post, D.; Sigmar, D.; Wootton, A.

    1992-12-22

    Theoretical physics problems related to divertor design are presented, organized by the region in which they occur. Some of the open questions in edge physics are presented from a theoretician`s point of view. After a cursory sketch of the fluid models of the edge plasma and their numerical realization, the following topics are taken up: time-dependent problems, non-axisymmetric effects, anomalous transport in the scrape-off layer, edge kinetic theory, sheath effects and boundary conditions in divertors, electric field effects, atomic and molecular data issues, impurity transport in the divertor region, poloidally localized power dissipation (MARFEs and dense gas targets), helium ash removal, and neutral transport. The report ends with a summary of selected problems of particular significance and a brief bibliography of survey articles and related conference proceedings.

  4. Operating experience review of service water system problems

    SciTech Connect (OSTI)

    Lam, P.

    1989-01-01

    In a recent paper, selected results of a comprehensive review and evaluation of service water system problems conducted by the Office for Analysis and Evaluation of Operational Data (AEOD) of the US Nuclear Regulatory Commission (NRC) were presented. The results of this review and evaluation indicated that service water system problems have significant safety implications. These system problems are attributable to a great variety of causes and have adverse impacts on a large number of safety-related systems and components. To provide additional feedback of operating experience, this paper presents an overview of the dominant mechanisms leading to service water system degradations and failures. The failures and degradations of service water systems observed in the 276 operating events are grouped into six general categories. The six general categories are (1) fouling due to various mechanisms, (2) single-failure and other design deficiencies, (3) flooding, (4) equipment failures, (5) personnel and procedural errors, and (6) seismic deficiencies.

  5. Rekindle the Fire: Building Supercomputers to Solve Dynamic Problems

    SciTech Connect (OSTI)

    Studham, Scott S. )

    2004-02-16

    Seymour Cray had a Lets go to the moon attitude when it came to building high-performance computers. His drive was to create architectures designed to solve the most challenging problems. Modern high-performance computer architects, however, seem to be focusing on building the largest floating-point-generation machines by using truckloads of commodity parts. Don't get me wrong; current clusters can solve a class of problems that are untouchable by any other system in the world, including the supercomputers of yesteryear. Many of the worlds fastest clusters provide new insights into weather forecasting, our understanding of fundamental sciences and provide the ability to model our nuclear stockpiles. Lets call this class of problem a first-principles simulation because the simulations are based on a fundamental physical understanding or model.

  6. COAL-FIRED UTILITY BOILERS: SOLVING ASH DEPOSITION PROBLEMS

    SciTech Connect (OSTI)

    Christopher J. Zygarlicke; Donald P. McCollor; Steven A. Benson; Jay R. Gunderson

    2001-04-01

    The accumulation of slagging and fouling ash deposits in utility boilers has been a source of aggravation for coal-fired boiler operators for over a century. Many new developments in analytical, modeling, and combustion testing methods in the past 20 years have made it possible to identify root causes of ash deposition. A concise and comprehensive guidelines document has been assembled for solving ash deposition as related to coal-fired utility boilers. While this report accurately captures the current state of knowledge in ash deposition, note that substantial research and development is under way to more completely understand and mitigate slagging and fouling. Thus, while comprehensive, this document carries the title ''interim,'' with the idea that future work will provide additional insight. Primary target audiences include utility operators and engineers who face plant inefficiencies and significant operational and maintenance costs that are associated with ash deposition problems. Pulverized and cyclone-fired coal boilers are addressed specifically, although many of the diagnostics and solutions apply to other boiler types. Logic diagrams, ash deposit types, and boiler symptoms of ash deposition are used to aid the user in identifying an ash deposition problem, diagnosing and verifying root causes, determining remedial measures to alleviate or eliminate the problem, and then monitoring the situation to verify that the problem has been solved. In addition to a step-by-step method for identifying and remediating ash deposition problems, this guideline document (Appendix A) provides descriptions of analytical techniques for diagnostic testing and gives extensive fundamental and practical literature references and addresses of organizations that can provide help in alleviating ash deposition problems.

  7. COMPLEXITY&APPROXIMABILITY OF QUANTIFIED&STOCHASTIC CONSTRAINT SATISFACTION PROBLEMS

    SciTech Connect (OSTI)

    Hunt, H. B.; Marathe, M. V.; Stearns, R. E.

    2001-01-01

    Let D be an arbitrary (not necessarily finite) nonempty set, let C be a finite set of constant symbols denoting arbitrary elements of D, and let S and T be an arbitrary finite set of finite-arity relations on D. We denote the problem of determining the satisfiability of finite conjunctions of relations in S applied to variables (to variables and symbols in C) by SAT(S) (by SATc(S).) Here, we study simultaneously the complexity of decision, counting, maximization and approximate maximization problems, for unquantified, quantified and stochastically quantified formulas. We present simple yet general techniques to characterize simultaneously, the complexity or efficient approximability of a number of versions/variants of the problems SAT(S), Q-SAT(S), S-SAT(S),MAX-Q-SAT(S) etc., for many different such D,C ,S, T. These versions/variants include decision, counting, maximization and approximate maximization problems, for unquantified, quantified and stochastically quantified formulas. Our unified approach is based on the following two basic concepts: (i) strongly-local replacements/reductions and (ii) relational/algebraic represent ability. Some of the results extend the earlier results in [Pa85,LMP99,CF+93,CF+94O]u r techniques and results reported here also provide significant steps towards obtaining dichotomy theorems, for a number of the problems above, including the problems MAX-&-SAT( S), and MAX-S-SAT(S). The discovery of such dichotomy theorems, for unquantified formulas, has received significant recent attention in the literature [CF+93,CF+94,Cr95,KSW97

  8. Simple methods solve vacuum column problems using plant data

    SciTech Connect (OSTI)

    Golden, S.W.; Sloley, A.W. )

    1992-09-14

    This paper reports that simple methods can be used to evaluate common vacuum column problems using actual field measurements. All that is required is an enthalpy table, a calculator, and an absolute pressure manometer, which can be purchased for about $100. The key to troubleshooting refinery crude or lube vacuum columns is basic plant data. Although many techniques may be used to increase cutpoint, many times the largest yield improvements can be achieved on existing units simply by eliminating such problems, as leaking collector trays or overflowing liquid distributors.

  9. Tabu search techniques for large high-school timetabling problems

    SciTech Connect (OSTI)

    Schaerf, A.

    1996-12-31

    The high-school timetabling problem consists in assigning all the lectures of a high school to the time periods in such a way that no teacher (or class) is involved in more than one lecture at a time and other side constraints are satisfied. The problem is NP-complete and is usually tackled using heuristic methods. This paper describes a solution algorithm (and its implementation) based on Tabu Search. The algorithm interleaves different types of moves and makes use of an adaptive relaxation of the hard constraints. The implementation of the algorithm has been successfully experimented in some large high schools with various kinds of side constraints.

  10. Channeling problem for charged particles produced by confining environment

    SciTech Connect (OSTI)

    Chuluunbaatar, O.; Gusev, A. A.; Derbov, V. L.; Krassovitskiy, P. M.; Vinitsky, S. I.

    2009-05-15

    Channeling problem produced by confining environment that leads to resonance scattering of charged particles via quasistationary states imbedded in the continuum is examined. Nonmonotonic dependence of physical parameters on collision energy and/or confining environment due to resonance transmission and total reflection effects is confirmed that can increase the rate of recombination processes. The reduction of the model for two identical charged ions to a boundary problem is considered together with the asymptotic behavior of the solution in the vicinity of pair-collision point and the results of R-matrix calculations. Tentative estimations of the enhancement factor and the total reflection effect are discussed.

  11. How to Solve Schroedinger Problems by Approximating the Potential Function

    SciTech Connect (OSTI)

    Ledoux, Veerle; Van Daele, Marnix

    2010-09-30

    We give a survey over the efforts in the direction of solving the Schroedinger equation by using piecewise approximations of the potential function. Two types of approximating potentials have been considered in the literature, that is piecewise constant and piecewise linear functions. For polynomials of higher degree the approximating problem is not so easy to integrate analytically. This obstacle can be circumvented by using a perturbative approach to construct the solution of the approximating problem, leading to the so-called piecewise perturbation methods (PPM). We discuss the construction of a PPM in its most convenient form for applications and show that different PPM versions (CPM,LPM) are in fact equivalent.

  12. National Energy Software Center: benchmark problem book. Revision

    SciTech Connect (OSTI)

    none,

    1985-12-01

    Computational benchmarks are given for the following problems: (1) Finite-difference, diffusion theory calculation of a highly nonseparable reactor, (2) Iterative solutions for multigroup two-dimensional neutron diffusion HTGR problem, (3) Reference solution to the two-group diffusion equation, (4) One-dimensional neutron transport transient solutions, (5) To provide a test of the capabilities of multi-group multidimensional kinetics codes in a heavy water reactor, (6) Test of capabilities of multigroup neutron diffusion in LMFBR, and (7) Two-dimensional PWR models.

  13. Problems of millipound thrust measurement. The "Hansen Suspension"

    SciTech Connect (OSTI)

    Carta, David G.

    2014-03-31

    Considered in detail are problems which led to the need and use of the 'Hansen Suspension'. Also discussed are problems which are likely to be encountered in any low level thrust measuring system. The methods of calibration and the accuracies involved are given careful attention. With all parameters optimized and calibration techniques perfected, the system was found capable of a resolution of 10 {mu} lbs. A comparison of thrust measurements made by the 'Hansen Suspension' with measurements of a less sophisticated device leads to some surprising results.

  14. Cation Uptake and Allocation by Red Pine Seedlings under Cation-Nutrient Stress in a Column Growth Experiment

    SciTech Connect (OSTI)

    Shi, Zhenqing; Balogh-Brunstad, Zsuzsanna; Grant, Michael R.; Harsh, James B.; Gill, Richard; Thomashow, Linda; Dohnalkova, Alice; Stacks, Daryl; Letourneau, Melissa; Keller, Chester K.

    2014-01-10

    Background and Aims Plant nutrient uptake is affected by environmental stress, but how plants respond to cation-nutrient stress is poorly understood. We assessed the impact of varying degrees of cation-nutrient limitation on cation uptake in an experimental plant-mineral system. Methods Column experiments, with red pine (Pinus resinosa Ait.) seedlings growing in sand/mineral mixtures, were conducted for up to nine months under a range of Ca- and K-limited conditions. The Ca and K were supplied from both minerals and nutrient solutions with varying Ca and K concentrations. Results Cation nutrient stress had little impact on carbon allocation after nine months of plant growth and K was the limiting nutrient for biomass production. The Ca/Sr and K/Rb ratio results allowed independent estimation of dissolution incongruency and discrimination against Sr and Rb during cation uptake processes. The fraction of K in biomass from biotite increased with decreasing K supply from nutrient solutions. The mineral anorthite was consistently the major source of Ca, regardless of nutrient treatment. Conclusions Red pine seedlings exploited more mineral K in response to more severe K deficiency. This did not occur for Ca. Plant discrimination factors must be carefully considered to accurately identify nutrient sources using cation tracers.

  15. Navier-Stokes Solvers and Generalizations for Reacting Flow Problems

    SciTech Connect (OSTI)

    Elman, Howard C

    2013-01-27

    This is an overview of our accomplishments during the final term of this grant (1 September 2008 -- 30 June 2012). These fall mainly into three categories: fast algorithms for linear eigenvalue problems; solution algorithms and modeling methods for partial differential equations with uncertain coefficients; and preconditioning methods and solvers for models of computational fluid dynamics (CFD).

  16. On the RA research reactor fuel management problems

    SciTech Connect (OSTI)

    Matausek, M.V.; Marinkovic, N.

    1997-12-01

    After 25 yr of operation, the Soviet-origin 6.5-MW heavy water RA research reactor was shut down in 1984. Basic facts about RA reactor operation, aging, reconstruction, and spent-fuel disposal have been presented and discussed in earlier papers. The following paragraphs present recent activities and results related to important fuel management problems.

  17. DYNA3D Material Model 71 - Solid Element Test Problem

    SciTech Connect (OSTI)

    Zywicz, E

    2008-01-24

    A general phenomenological-based elasto-plastic nonlinear isotropic strain hardening material model was implemented in DYNA3D for use in solid, beam, truss, and shell elements. The constitutive model, Model 71, is based upon conventional J2 plasticity and affords optional temperature and rate dependence (visco-plasticity). The expressions for strain hardening, temperature dependence, and rate dependence allow it to represent a wide variety of material responses. Options to capture temperature changes due to adiabatic heating and thermal straining are incorporated into the constitutive framework as well. The verification problem developed for this constitutive model consists of four uni-axial right cylinders subject to constant true strain-rate boundary conditions. Three of the specimens have different constant strain rates imposed, while the fourth specimen is subjected to several strain rate jumps. The material parameters developed by Fehlmann (2005) for 21-6-9 Nitronic steel are utilized. As demonstrated below, the finite element (FE) simulations are in excellent agreement with the theoretical responses and indicated the model is functioning as desired. Consequently, this problem serves as both a verification problem and regression test problem for DYNA3D.

  18. Practical control strategy eliminates FCCU compressor surge problems

    SciTech Connect (OSTI)

    Campos, M.C.M.M.; Rodriques, P.S.B. )

    1993-01-11

    This paper reports that the control system originally designed for the fluid catalytic cracking unit (FCCU) compressor at Petroleo Brasileiro SA's (Petrobras) Presidente Bernardes refinery, in Sao Paulo, Brazil, was inadequate. The system required almost permanent flow recirculation to prevent surge. An improved antisurge control strategy was implemented in mid-1990. Since then, the unit has operated without the former surge problems.

  19. A VLSI structure for the deadlock avoidance problem

    SciTech Connect (OSTI)

    Bertolazzi, P.; Bongiovanni, G.

    1985-11-01

    In this paper the authors present two VLSI structures implementing the banker's algorithm for the deadlock avoidance problem, and we derive the area x (time)/sup 2/ lower bound for such an algorithm. The first structure is based on the VLSI mesh of trees. The second structure is a modification of the first one, and it approaches more closely the theoretical lower bound.

  20. EPA Environmental Justice Collaborative Problem-Solving Cooperative Agreement RFP

    Broader source: Energy.gov [DOE]

    The U.S. Environmental Protection Agency (EPA) issued a request for proposals for the Environmental Justice Collaborative Problem-Solving (EJCPS) Cooperative Agreement to support community-based organization to collaborate and partner with industry, government, academia, and other stakeholders to develop and implement solutions that address local environmental and public health issues.

  1. Waste site characterization and remediation: Problems in developing countries

    SciTech Connect (OSTI)

    Kalavapudi, M.; Iyengar, V.

    1996-12-31

    Increased industrial activities in developing countries have degraded the environment, and the impact on the environment is further magnified because of an ever-increasing population, the prime receptors. Independent of the geographical location, it is possible to adopt effective strategies to solve environmental problems. In the United States, waste characterization and remediation practices are commonly used for quantifying toxic contaminants in air, water, and soil. Previously, such procedures were extraneous, ineffective, and cost-intensive. Reconciliation between the government and stakeholders, reinforced by valid data analysis and environmental exposure assessments, has allowed the {open_quotes}Brownfields{close_quotes} to be a successful approach. Certified reference materials and standard reference materials from the National Institute of Standards (NIST) are indispensable tools for solving environmental problems and help to validate data quality and the demands of legal metrology. Certified reference materials are commonly available, essential tools for developing good quality secondary and in-house reference materials that also enhance analytical quality. This paper cites examples of environmental conditions in developing countries, i.e., industrial pollution problems in India, polluted beaches in Brazil, and deteriorating air quality in countries, such as Korea, China, and Japan. The paper also highlights practical and effective approaches for remediating these problems. 23 refs., 7 figs., 1 tab.

  2. Genetic algorithms and their use in Geophysical Problems

    SciTech Connect (OSTI)

    Parker, Paul B.

    1999-04-01

    Genetic algorithms (GAs), global optimization methods that mimic Darwinian evolution are well suited to the nonlinear inverse problems of geophysics. A standard genetic algorithm selects the best or ''fittest'' models from a ''population'' and then applies operators such as crossover and mutation in order to combine the most successful characteristics of each model and produce fitter models. More sophisticated operators have been developed, but the standard GA usually provides a robust and efficient search. Although the choice of parameter settings such as crossover and mutation rate may depend largely on the type of problem being solved, numerous results show that certain parameter settings produce optimal performance for a wide range of problems and difficulties. In particular, a low (about half of the inverse of the population size) mutation rate is crucial for optimal results, but the choice of crossover method and rate do not seem to affect performance appreciably. Optimal efficiency is usually achieved with smaller (< 50) populations. Lastly, tournament selection appears to be the best choice of selection methods due to its simplicity and its autoscaling properties. However, if a proportional selection method is used such as roulette wheel selection, fitness scaling is a necessity, and a high scaling factor (> 2.0) should be used for the best performance. Three case studies are presented in which genetic algorithms are used to invert for crustal parameters. The first is an inversion for basement depth at Yucca mountain using gravity data, the second an inversion for velocity structure in the crust of the south island of New Zealand using receiver functions derived from teleseismic events, and the third is a similar receiver function inversion for crustal velocities beneath the Mendocino Triple Junction region of Northern California. The inversions demonstrate that genetic algorithms are effective in solving problems with reasonably large numbers of free

  3. Complexity analysis of pipeline mapping problems in distributed heterogeneous networks

    SciTech Connect (OSTI)

    Lin, Ying; Wu, Qishi; Zhu, Mengxia; Rao, Nageswara S

    2009-04-01

    Largescale scientific applications require using various system resources to execute complex computing pipelines in distributed networks to support collaborative research. System resources are typically shared in the Internet or over dedicated connections based on their location, availability, capability, and capacity. Optimizing the network performance of computing pipelines in such distributed environments is critical to the success of these applications. We consider two types of largescale distributed applications: (1) interactive applications where a single dataset is sequentially processed along a pipeline; and (2) streaming applications where a series of datasets continuously flow through a pipeline. The computing pipelines of these applications consist of a number of modules executed in a linear order in network environments with heterogeneous resources under different constraints. Our goal is to find an efficient mapping scheme that allocates the modules of a pipeline to network nodes for minimum endtoend delay or maximum frame rate. We formulate the pipeline mappings in distributed environments as optimization problems and categorize them into six classes with different optimization goals and mapping constraints: (1) Minimum Endtoend Delay with No Node Reuse (MEDNNR), (2) Minimum Endtoend Delay with Contiguous Node Reuse (MEDCNR), (3) Minimum Endtoend Delay with Arbitrary Node Reuse (MEDANR), (4) Maximum Frame Rate with No Node Reuse or Share (MFRNNRS), (5) Maximum Frame Rate with Contiguous Node Reuse and Share (MFRCNRS), and (6) Maximum Frame Rate with Arbitrary Node Reuse and Share (MFRANRS). Here, 'contiguous node reuse' means that multiple contiguous modules along the pipeline may run on the same node and 'arbitrary node reuse' imposes no restriction on node reuse. Note that in interactive applications, a node can be reused but its resource is not shared. We prove that MEDANR is polynomially solvable and the rest are NP-complete. MEDANR, where either

  4. Qualification of the Lasentec M600P Particle Size Analyzer and the Red Valve Model 1151 Pressure Sensor

    SciTech Connect (OSTI)

    JR Bontha; NG Colton; EA Daymo; TD Hylton; CK Bayne; TH May

    2000-01-28

    The Lasentec M600 in-line particle size analyzer was installed at Oak Ridge National Laboratory (ORNL) in August 1998 to support retrieval of the Gunite and Associated Tanks (GAAT). Before installation at ORNL, the sensor underwent validation testing at the Pacific Northwest National Laboratory (PNNL) Instrument Validation facility. Mechanically, the instrument worked well during validation testing and met all expectations. Operationally, much was learned about optimum ways to display and interpret the data. Slurry samples taken during the in-line tests at PNNL were shipped to the vendor for analysis with a benchtop Lasentec sensor. These experiments were performed to determine if off-line analyses yield particle size distributions similar to those generated by the in-line sensor. It was determined that the Lasentec sensor measures repeatable chord lengths as long as particles are ''presenter'' to the sensor window the same way. After the initial non-radioactive simulant testing at PNNL, the instrument was shipped for radioactive validation and acceptance testing in the Slurry Monitoring Test System (SMTS) connected to the Tank W-9 of the GAATs at ORNL. For all acceptance tests conducted at ORNL, the variation in the chord length distribution and the total particle count corresponded very well with the slurry density data as determined using an in-line Promass 63M Coriolis meter. Based on the performance results obtained, the Lasentec M600P FBRM is expected to meet the requirements for measuring the particle size distribution during the slurry transfer operations at Hanford and the Oak Ridge GAAT remediation project. The Red Valve pressure sensor was endorsed at the Hanford Site following instrument validation tests at PNNL and is currently in operation in the Tank 241-C-106 pump pit. While this instrument measures pressure within a transfer line, this type of pressure sensor could be configured to measure pressure drop over time. In turn, the status of a slurry

  5. Monolithic integration of InGaN segments emitting in the blue, green, and red spectral range in single ordered nanocolumns

    SciTech Connect (OSTI)

    Albert, S.; Bengoechea-Encabo, A.; Sanchez-Garcia, M. A.; Calleja, E.

    2013-05-06

    This work reports on the selective area growth by plasma-assisted molecular beam epitaxy and characterization of InGaN/GaN nanocolumnar heterostructures. The optimization of the In/Ga and total III/V ratios, as well as the growth temperature, provides control on the emission wavelength, either in the blue, green, or red spectral range. An adequate structure tailoring and monolithic integration in a single nanocolumnar heterostructure of three InGaN portions emitting in the red-green-blue colors lead to white light emission.

  6. Progress on PRONGHORN Application to NGNP Related Problems

    SciTech Connect (OSTI)

    Dana A. Knoll

    2009-08-01

    We are developing a multiphysics simulation tool for Very High-Temperature gascooled Reactors (VHTR). The simulation tool, PRONGHORN, takes advantages of the Multiphysics Object-Oriented Simulation library, and is capable of solving multidimensional thermal-fluid and neutronics problems implicitly in parallel. Expensive Jacobian matrix formation is alleviated by the Jacobian-free Newton-Krylov method, and physics-based preconditioning is applied to improve the convergence. The initial development of PRONGHORN has been focused on the pebble bed corec concept. However, extensions required to simulate prismatic cores are underway. In this progress report we highlight progress on application of PRONGHORN to PBMR400 benchmark problems, extension and application of PRONGHORN to prismatic core reactors, and progress on simulations of 3-D transients.

  7. MODEL 9975 SHIPPING PACKAGE FABRICATION PROBLEMS AND SOLUTIONS

    SciTech Connect (OSTI)

    May, C; Allen Smith, A

    2008-05-07

    The Model 9975 Shipping Package is the latest in a series (9965, 9968, etc.) of radioactive material shipping packages that have been the mainstay for shipping radioactive materials for several years. The double containment vessels are relatively simple designs using pipe and pipe cap in conjunction with the Chalfont closure to provide a leak-tight vessel. The fabrication appears simple in nature, but the history of fabrication tells us there are pitfalls in the different fabrication methods and sequences. This paper will review the problems that have arisen during fabrication and precautions that should be taken to meet specifications and tolerances. The problems and precautions can also be applied to the Models 9977 and 9978 Shipping Packages.

  8. Dynamic extension of the Simulation Problem Analysis Kernel (SPANK)

    SciTech Connect (OSTI)

    Sowell, E.F. . Dept. of Computer Science); Buhl, W.F. )

    1988-07-15

    The Simulation Problem Analysis Kernel (SPANK) is an object-oriented simulation environment for general simulation purposes. Among its unique features is use of the directed graph as the primary data structure, rather than the matrix. This allows straightforward use of graph algorithms for matching variables and equations, and reducing the problem graph for efficient numerical solution. The original prototype implementation demonstrated the principles for systems of algebraic equations, allowing simulation of steady-state, nonlinear systems (Sowell 1986). This paper describes how the same principles can be extended to include dynamic objects, allowing simulation of general dynamic systems. The theory is developed and an implementation is described. An example is taken from the field of building energy system simulation. 2 refs., 9 figs.

  9. Raymond Davis Jr., Solar Neutrinos, and the Solar Neutrino Problems

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Raymond Davis, Jr., Solar Neutrinos, and the Solar Neutrino Problem Resources with Additional Information Raymond Davis, Jr. Photo Courtesy of Brookhaven National Laboratory (BNL) Raymond Davis, Jr., who conducted research in the Chemistry Department at Brookhaven National Laboratory (BNL) from 1948 through 1984, was awarded the 2002 Nobel Prize in Physics "for pioneering contributions to astrophysics, in particular for the detection of cosmic neutrinos." Dr. Davis is also a recipient

  10. A Lie algebraic approach to the Kondo problem

    SciTech Connect (OSTI)

    Rajeev, S.G.

    2010-04-15

    The Kondo problem is approached using the unitary Lie algebra of spin-singlet fermion bilinears. In the limit when the number of values of the spin N goes to infinity the theory approaches a classical limit, which still requires a renormalization. We determine the ground state of this renormalized theory. Then we construct a quantum theory around this classical limit, which amounts to recovering the case of finite N.

  11. Exascale Computing Allows Scientists to Approach New Class of Problems |

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Princeton Plasma Physics Lab Exascale Computing Allows Scientists to Approach New Class of Problems By Gale Scott March 19, 2012 Tweet Widget Google Plus One Share on Facebook From left are Venkatramani Balaji, Jeroen Tromp, and Bill Tang at the Visualization Laboratory, created by the Princeton Institute for Computational Science and Engineering (PICSciE), in the Lewis Library on main campus. (Photo by Elle Starkman, PPPL Office of Communications) From left are Venkatramani Balaji, Jeroen

  12. Combined approach to the inverse protein folding problem. Final report

    SciTech Connect (OSTI)

    Ruben A. Abagyan

    2000-06-01

    The main scientific contribution of the project ''Combined approach to the inverse protein folding problem'' submitted in 1996 and funded by the Department of Energy in 1997 is the formulation and development of the idea of the multilink recognition method for identification of functional and structural homologues of newly discovered genes. This idea became very popular after they first announced it and used it in prediction of the threading targets for the CASP2 competition (Critical Assessment of Structure Prediction).

  13. Adaptive domain decomposition methods for advection-diffusion problems

    SciTech Connect (OSTI)

    Carlenzoli, C.; Quarteroni, A.

    1995-12-31

    Domain decomposition methods can perform poorly on advection-diffusion equations if diffusion is dominated by advection. Indeed, the hyperpolic part of the equations could affect the behavior of iterative schemes among subdomains slowing down dramatically their rate of convergence. Taking into account the direction of the characteristic lines we introduce suitable adaptive algorithms which are stable with respect to the magnitude of the convective field in the equations and very effective on bear boundary value problems.

  14. Tensile strengths of problem shales and clays. Master's thesis

    SciTech Connect (OSTI)

    Rechner, F.J.

    1990-01-01

    The greatest single expense faced by oil companies involved in the exploration for crude oil is that of drilling wells. The most abundant rock drilled is shale. Some of these shales cause wellbore stability problems during the drilling process. These can range from slow rate of penetration and high torque up to stuck pipe and hole abandonment. The mechanical integrity of the shale must be known when the shalers are subjected to drilling fluids to develop an effective drilling plan.

  15. Quality problems in waters used for drinking purposes in Italy

    SciTech Connect (OSTI)

    Funari, E.; Bastone, A.; Bottoni, P.; De Donno, D.; Donati, L. )

    1991-12-01

    With a grant from the Italian Ministry of the Environment, the National Institute of Health (Istituto Superiore di Sanita) promoted and coordinated some activities aimed at determining the extent and the intensity of contamination of waters used for human consumption by some chemical agents, and describing causes and modalities of contamination and human health implications. The chemical agents examined were herbicides, nitrates, trihalomethanes, asbestos, manganese and fluoride. In this paper a first nationwide picture of these problems is reported.

  16. COLLOQUIUM: History, Applications, Numerical Values and Problems with the

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Calculation of EROI - Energy Return on (Energy) Investment | Princeton Plasma Physics Lab March 2, 2016, 4:15pm to 5:30pm Colloquia MBG Auditorium COLLOQUIUM: History, Applications, Numerical Values and Problems with the Calculation of EROI - Energy Return on (Energy) Investment Professor Charles Hall State University of NY College of Environmental Science and Forestry Plants and animals are subjected to fierce selective pressure to do the "right thing" energetically, that is to

  17. General Solution of the Kenamond HE Problem 3

    SciTech Connect (OSTI)

    Kaul, Ann

    2015-12-15

    A general solution for programmed burn calculations of the light times produced by a singlepoint initiation of a single HE region surrounding an inert region has been developed. In contrast to the original solutions proposed in References 1 and 2, the detonator is no longer restricted to a location on a Cartesian axis and can be located at any point inside the HE region. This general solution has been implemented in the ExactPack suite of exact solvers for verification problems.

  18. Geological problems in radioactive waste isolation - A world wide review

    SciTech Connect (OSTI)

    Witherspoon, P.A.

    1991-06-01

    The problem of isolating radioactive wastes from the biosphere presents specialists in the earth sciences with some of the most complicated problems they have ever encountered. This is especially true for high-level waste (HLW), which must be isolated in the underground and away from the biosphere for thousands of years. The most widely accepted method of doing this is to seal the radioactive materials in metal canisters that are enclosed by a protective sheath and placed underground in a repository that has been carefully constructed in an appropriate rock formation. Much new technology is being developed to solve the problems that have been raised, and there is a continuing need to publish the results of new developments for the benefit of all concerned. Table 1 presents a summary of the various formations under investigation according to the reports submitted for this world wide review. It can be seen that in those countries that are searching for repository sites, granitic and metamorphic rocks are the prevalent rock type under investigation. Six countries have developed underground research facilities that are currently in use. All of these investigations are in saturated systems below the water table, except the United States project, which is in the unsaturated zone of a fractured tuff.

  19. Collaboration Results - Applying Technical Solutions To Environmental Remediation Problems

    SciTech Connect (OSTI)

    Boyd, G.; Fiore, J.; Walker, J.; DeRemer, C.; Wight, E.

    2002-02-26

    Within the Department of Energy's Office of Environmental Management (EM), the Office of Science and Technology (OST) identifies and develops innovative technologies that accelerate cleanup of high-priority environmental contamination problems and enable EM closure sites to meet closure schedules. OST manages an integrated research and development program that is essential to completing timely and cost-effective cleanup and stewardship of DOE sites. While innovative technologies can make significant contributions to the cleanup process, in some cases, EM has encountered unexpected barriers to their implementation. Technical obstacles are expected, but administrative challenges-such as regulatory, organizational, and stakeholder issues-must also be addressed. OST has found that collaborative needs identification and problem solving are essential components in overcoming these barriers. Collaboration helps EM meet its cleanup goals, close sites, and reduce the overall cost of cleanup at DOE sites nationwide. This paper presents examples of OST's collaboration efforts that expedite site closure and solve specific cleanup problems at EM sites.

  20. The coincidence problem and interacting holographic dark energy

    SciTech Connect (OSTI)

    Karwan, Khamphee

    2008-05-15

    We study the dynamical behaviour of the interacting holographic dark energy model whose interaction term is Q = 3H({lambda}{sub d}{rho}{sub d}+{lambda}{sub c}{rho}{sub c}), where {rho}{sub d} and {rho}{sub c} are the energy densities of dark energy and cold dark matter respectively. To satisfy the observational constraints from type Ia supernovae, the cosmic microwave background shift parameter and baryon acoustic oscillation measurements, if {lambda}{sub c} = {lambda}{sub d} or {lambda}{sub d},{lambda}{sub c}>0, the cosmic evolution will only reach the attractor in the future and the ratio {rho}{sub c}/{rho}{sub d} cannot be slowly varying at present. Since the cosmic attractor can be reached in the future even when the present values of the cosmological parameters do not satisfy the observational constraints, the coincidence problem is not really alleviated in this case. However, if {lambda}{sub c}{ne}{lambda}{sub d} and they are allowed to be negative, the ratio {rho}{sub c}/{rho}{sub d} can be slowly varying at present and the cosmic attractor can be reached near the present epoch. Hence, the alleviation of the coincidence problem is attainable in this case. The alleviation of the coincidence problem in this case is still attainable when confronting this model with Sloan Digital Sky Survey data.

  1. Geological problems in radioactive waste isolation - second worldwide review

    SciTech Connect (OSTI)

    Witherspoon, P.A.

    1996-09-01

    The first world wide review of the geological problems in radioactive waste isolation was published by Lawrence Berkeley National Laboratory in 1991. This review was a compilation of reports that had been submitted to a workshop held in conjunction with the 28th International Geological Congress that took place July 9-19, 1989 in Washington, D.C. Reports from 15 countries were presented at the workshop and four countries provided reports after the workshop, so that material from 19 different countries was included in the first review. It was apparent from the widespread interest in this first review that the problem of providing a permanent and reliable method of isolating radioactive waste from the biosphere is a topic of great concern among the more advanced, as well as the developing, nations of the world. This is especially the case in connection with high-level waste (HLW) after its removal from nuclear power plants. The general concensus is that an adequate isolation can be accomplished by selecting an appropriate geologic setting and carefully designing the underground system with its engineered barriers. This document contains the Second Worldwide Review of Geological Problems in Radioactive Waste Isolation, dated September 1996.

  2. Strengthened MILP formulation for certain gas turbine unit commitment problems

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Pan, Kai; Guan, Yongpei; Watson, Jean -Paul; Wang, Jianhui

    2015-05-22

    In this study, we derive a strengthened MILP formulation for certain gas turbine unit commitment problems, in which the ramping rates are no smaller than the minimum generation amounts. This type of gas turbines can usually start-up faster and have a larger ramping rate, as compared to the traditional coal-fired power plants. Recently, the number of this type of gas turbines increases significantly due to affordable gas prices and their scheduling flexibilities to accommodate intermittent renewable energy generation. In this study, several new families of strong valid inequalities are developed to help reduce the computational time to solve these typesmore » of problems. Meanwhile, the validity and facet-defining proofs are provided for certain inequalities. Finally, numerical experiments on a modified IEEE 118-bus system and the power system data based on recent studies verify the effectiveness of applying our formulation to model and solve this type of gas turbine unit commitment problems, including reducing the computational time to obtain an optimal solution or obtaining a much smaller optimality gap, as compared to the default CPLEX, when the time limit is reached with no optimal solutions obtained.« less

  3. Strengthened MILP formulation for certain gas turbine unit commitment problems

    SciTech Connect (OSTI)

    Pan, Kai; Guan, Yongpei; Watson, Jean -Paul; Wang, Jianhui

    2015-05-22

    In this study, we derive a strengthened MILP formulation for certain gas turbine unit commitment problems, in which the ramping rates are no smaller than the minimum generation amounts. This type of gas turbines can usually start-up faster and have a larger ramping rate, as compared to the traditional coal-fired power plants. Recently, the number of this type of gas turbines increases significantly due to affordable gas prices and their scheduling flexibilities to accommodate intermittent renewable energy generation. In this study, several new families of strong valid inequalities are developed to help reduce the computational time to solve these types of problems. Meanwhile, the validity and facet-defining proofs are provided for certain inequalities. Finally, numerical experiments on a modified IEEE 118-bus system and the power system data based on recent studies verify the effectiveness of applying our formulation to model and solve this type of gas turbine unit commitment problems, including reducing the computational time to obtain an optimal solution or obtaining a much smaller optimality gap, as compared to the default CPLEX, when the time limit is reached with no optimal solutions obtained.

  4. Sign problem in Z-coefficient for particle emission angular distributi...

    Office of Scientific and Technical Information (OSTI)

    Sign problem in Z-coefficient for particle emission angular distributions Citation Details In-Document Search Title: Sign problem in Z-coefficient for particle emission angular ...

  5. Sign problem in Z-coefficient for particle emission angular distributi...

    Office of Scientific and Technical Information (OSTI)

    Sign problem in Z-coefficient for particle emission angular distributions Citation Details In-Document Search Title: Sign problem in Z-coefficient for particle emission angular...

  6. Problem Turned Into Performance for Solar Cells | U.S. DOE Office...

    Office of Science (SC) Website

    Problem Turned Into Performance for Solar Cells Basic Energy Sciences (BES) BES Home About ... Problem Turned Into Performance for Solar Cells Boundaries between crystalline grains - ...

  7. Volatile out gassing characteristics of highly filled ethylene vinyl acetate binder materials: Gas phase infra-red spectroscopy

    SciTech Connect (OSTI)

    Patel, Mogon; Bowditch, Martin; Jones, Ben; Netherton, David; Khan, Niaz; Letant, Sonia; Maxwell, Robert S.; Birdsell, Stephen A.

    2012-12-08

    Gas phase Infra-red (IR) spectroscopy has been used to investigate volatile out gassing properties of highly filled poly (ethylene-co-vinyl acetate) materials. In these studies, a Scout-ENTM heated gas cell was interfaced to a vacuum FTIR spectrometer, and the quantification of evolved species was achieved through calibration of the gas cell with certified gas standards. The volatile out gassing properties were monitored as a function of time during storage at 75°C under vacuum conditions (< 1mbar). Acetic acid, carbon dioxide and water were identified as the major out gassing products through IR absorption peaks at 1797, 2354 and 3853 cm-1, respectively. We present a comparison of three highly filled poly (ethyleneco- vinyl acetate) resins.

  8. Coupling quantum dots to optical fiber: Low pump threshold laser in the red with a near top hat beam profile

    SciTech Connect (OSTI)

    Cheng, H.; Mironov, A. E.; Ni, J. H.; Yang, H. J.; Chen, W. W.; Dai, Z.; Park, S.-J.; Eden, J. G.; Dragic, P. D.; Dong, J.

    2015-02-23

    Direct coupling of the optical field in a ?244?nm thick, CdSe/ZnS quantum dot film to an optical fiber has yielded lasing in the red (? ? 644?nm) with a threshold pump energy density?

  9. Volatile out gassing characteristics of highly filled ethylene vinyl acetate binder materials: Gas phase infra-red spectroscopy

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Patel, Mogon; Bowditch, Martin; Jones, Ben; Netherton, David; Khan, Niaz; Letant, Sonia; Maxwell, Robert S.; Birdsell, Stephen A.

    2012-12-08

    Gas phase Infra-red (IR) spectroscopy has been used to investigate volatile out gassing properties of highly filled poly (ethylene-co-vinyl acetate) materials. In these studies, a Scout-ENTM heated gas cell was interfaced to a vacuum FTIR spectrometer, and the quantification of evolved species was achieved through calibration of the gas cell with certified gas standards. The volatile out gassing properties were monitored as a function of time during storage at 75°C under vacuum conditions (< 1mbar). Acetic acid, carbon dioxide and water were identified as the major out gassing products through IR absorption peaks at 1797, 2354 and 3853 cm-1, respectively.more » We present a comparison of three highly filled poly (ethyleneco- vinyl acetate) resins.« less

  10. ASSEMBLY OF THE RED SEQUENCE IN INFRARED-SELECTED GALAXY CLUSTERS FROM THE IRAC SHALLOW CLUSTER SURVEY

    SciTech Connect (OSTI)

    Snyder, Gregory F.; Brodwin, Mark; Mancone, Conor M.; Gonzalez, Anthony H.; Zeimann, Gregory R.; Stanford, S. A.; Stern, Daniel; Eisenhardt, Peter R. M.; Brown, Michael J. I.; Dey, Arjun; Jannuzi, Buell; Perlmutter, Saul

    2012-09-10

    We present results for the assembly and star formation histories (SFHs) of massive ({approx}L*) red sequence galaxies (RSGs) in 11 spectroscopically confirmed, infrared-selected galaxy clusters at 1.0 < z < 1.5, the precursors to present-day massive clusters with M {approx} 10{sup 15} M{sub Sun }. Using rest-frame optical photometry, we investigate evolution in the color and scatter of the RSG population, comparing with models of possible SFHs. In contrast to studies of central cluster galaxies at lower redshift (z < 1), these data are clearly inconsistent with the continued evolution of stars formed and assembled primarily at a single, much earlier time. Specifically, we find that the colors of massive cluster galaxies at z Almost-Equal-To 1.5 imply that the bulk of star formation occurred at z {approx} 3, whereas by z Almost-Equal-To 1 their colors imply formation at z {approx} 2; therefore these galaxies exhibit approximately the same luminosity-weighted stellar age at 1 < z < 1.5. This likely reflects star formation that occurs over an extended period, the effects of significant progenitor bias, or both. Our results generally indicate that massive cluster galaxy populations began forming a significant mass of stars at z {approx}> 4, contained some red spheroids by z Almost-Equal-To 1.5, and were actively assembling much of their final mass during 1 < z < 2 in the form of younger stars. Qualitatively, the slopes of the cluster color-magnitude relations are consistent with no significant evolution relative to local clusters.

  11. Highly lead-loaded red plastic scintillators as an X-ray imaging system for the Laser Mega Joule

    SciTech Connect (OSTI)

    Hamel, M.; Normand, S.; Turk, G.; Darbon, S.

    2011-07-01

    The scope of this project intends to record spatially resolved images of core shape and size of a DT micro-balloon during Inertial Confinement Fusion (ICF) experiments at Laser Mega Joule facility (LMJ). We need to develop an X-ray imaging system which can operate in the radiative background generated by an ignition shot of ICF. The scintillator is a part of the imaging system and has to gather a compromise of scintillating properties (scintillating efficiency, decay time, emission wavelength) so as to both operate in the hard radiative environment and to allow the acquisition of spatially resolved images. Inorganic scintillators cannot be used because no compromise can be found regarding the expected scintillating properties, most of them are not fast enough and emit blue light. Organic scintillators are generally fast, but present low X-ray absorption in the 10 to 40 keV range, that does not permit the acquisition of spatially resolved images. To this aim, we have developed highly lead-loaded and red-fluorescent fast plastic scintillators. Such a combination is not currently available via scintillator suppliers, since they propose only blue-fluorescent plastic scintillators doped with up to 12%w Pb. Thus, incorporation ratio up to 27%w Pb has been reached in our laboratory, which can afford a plastic scintillator with an outstanding Z{sub eff} close to 50. X-rays in the 10 to 40 keV range can thus be detected with a higher probability of photoelectric effect than for classic organic scintillators, such as NE102. The strong orange-red fluorescence can be filtered, so that we can eliminate residual Cerenkov light, generated by {gamma}-ray absorption in glass parts of the imaging system. Decay times of our scintillators evaluated under UV excitation were estimated to be in the range 10 to 13 ns. (authors)

  12. Analysis of the Space Propulsion System Problem Using RAVEN

    SciTech Connect (OSTI)

    diego mandelli; curtis smith; cristian rabiti; andrea alfonsi

    2014-06-01

    This paper presents the solution of the space propulsion problem using a PRA code currently under development at Idaho National Laboratory (INL). RAVEN (Reactor Analysis and Virtual control ENviroment) is a multi-purpose Probabilistic Risk Assessment (PRA) software framework that allows dispatching different functionalities. It is designed to derive and actuate the control logic required to simulate the plant control system and operator actions (guided procedures) and to perform both Monte- Carlo sampling of random distributed events and Event Tree based analysis. In order to facilitate the input/output handling, a Graphical User Interface (GUI) and a post-processing data-mining module are available. RAVEN allows also to interface with several numerical codes such as RELAP5 and RELAP-7 and ad-hoc system simulators. For the space propulsion system problem, an ad-hoc simulator has been developed and written in python language and then interfaced to RAVEN. Such simulator fully models both deterministic (e.g., system dynamics and interactions between system components) and stochastic behaviors (i.e., failures of components/systems such as distribution lines and thrusters). Stochastic analysis is performed using random sampling based methodologies (i.e., Monte-Carlo). Such analysis is accomplished to determine both the reliability of the space propulsion system and to propagate the uncertainties associated to a specific set of parameters. As also indicated in the scope of the benchmark problem, the results generated by the stochastic analysis are used to generate risk-informed insights such as conditions under witch different strategy can be followed.

  13. Structure of the red fluorescent protein from a lancelet (Branchiostoma lanceolatum): a novel GYG chromophore covalently bound to a nearby tyrosine

    SciTech Connect (OSTI)

    Pletnev, Vladimir Z. Pletneva, Nadya V.; Lukyanov, Konstantin A.; Souslova, Ekaterina A.; Fradkov, Arkady F.; Chudakov, Dmitry M.; Chepurnykh, Tatyana; Yampolsky, Ilia V.; Wlodawer, Alexander; Dauter, Zbigniew; Pletnev, Sergei

    2013-09-01

    The crystal structure of the novel red emitting fluorescent protein from lancelet Branchiostoma lanceolatum (Chordata) revealed an unusual five residues cyclic unit comprising Gly58-Tyr59-Gly60 chromophore, the following Phe61 and Tyr62 covalently bound to chromophore Tyr59. A key property of proteins of the green fluorescent protein (GFP) family is their ability to form a chromophore group by post-translational modifications of internal amino acids, e.g. Ser65-Tyr66-Gly67 in GFP from the jellyfish Aequorea victoria (Cnidaria). Numerous structural studies have demonstrated that the green GFP-like chromophore represents the ‘core’ structure, which can be extended in red-shifted proteins owing to modifications of the protein backbone at the first chromophore-forming position. Here, the three-dimensional structures of green laGFP (λ{sub ex}/λ{sub em} = 502/511 nm) and red laRFP (λ{sub ex}/λ{sub em} ≃ 521/592 nm), which are fluorescent proteins (FPs) from the lancelet Branchiostoma lanceolatum (Chordata), were determined together with the structure of a red variant laRFP-ΔS83 (deletion of Ser83) with improved folding. Lancelet FPs are evolutionarily distant and share only ∼20% sequence identity with cnidarian FPs, which have been extensively characterized and widely used as genetically encoded probes. The structure of red-emitting laRFP revealed three exceptional features that have not been observed in wild-type fluorescent proteins from Cnidaria reported to date: (i) an unusual chromophore-forming sequence Gly58-Tyr59-Gly60, (ii) the presence of Gln211 at the position of the conserved catalytic Glu (Glu222 in Aequorea GFP), which proved to be crucial for chromophore formation, and (iii) the absence of modifications typical of known red chromophores and the presence of an extremely unusual covalent bond between the Tyr59 C{sup β} atom and the hydroxyl of the proximal Tyr62. The impact of this covalent bond on the red emission and the large Stokes shift (

  14. Ethylene-Vinyl Acetate Potential Problems for Photovoltaic Packaging: Preprint

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Ethylene-Vinyl Acetate Potential Problems for Photovoltaic Packaging Preprint M.D. Kempe, G.J. Jorgensen, K.M. Terwilliger, T.J. McMahon, and C.E. Kennedy National Renewable Energy Laboratory T.T. Borek Sandia National Laboratories Presented at the 2006 IEEE 4 th World Conference on Photovoltaic Energy Conversion (WCPEC-4) Waikoloa, Hawaii May 7-12, 2006 Conference Paper NREL/CP-520-39915 May 2006 NOTICE The submitted manuscript has been offered by an employee of the Midwest Research Institute

  15. Benefits, problems, and issues in open systems architectures

    SciTech Connect (OSTI)

    Emmerich, P.; Traynor, P.J.; Klein, S.A.; Fisher, M.T.; Burn, R.D.; Hoffman, R.; Castelli, G.

    1994-02-01

    This paper is sponsored by the Power System Control Centers Working Group and the Control Centers Open Systems Task Force. The intent of the paper is to focus industry attention on issues relating to open energy management systems (EMS). The short note papers address both benefits and problem areas relating to the current open systems environment. The issues considered herein should be considered by any utility planning for a new EMS. They should also stimulate further through on related topics that will ultimately affect EMS reliability and availability.

  16. Viscous gravitational aether and the cosmological constant problem

    SciTech Connect (OSTI)

    Kuang, Xiaomei; Ling, Yi E-mail: yling@ncu.edu.cn

    2009-10-01

    Recently a notion of gravitational aether is advocated to solve the cosmological constant problem. Through the modification of the source of gravity one finds that the effective Newton's constant is source dependent so as to provide a simple but consistent way to decouple gravity from the vacuum energy. However, in the original paper the ratio of the effective Newton's constants for pressureless dust and radiation has an upper bound which is 0.75. In this paper we propose a scheme to loose this bound by introducing a bulk viscosity for the gravitational aether, and expect this improvement will provide more space for matching predictions from this theoretical programm with observational constraints.

  17. Investigation of valve failure problems in LWR power plants

    SciTech Connect (OSTI)

    1980-04-01

    An analysis of component failures from information in the computerized Nuclear Safety Information Center (NSIC) data bank shows that for both PWR and BWR plants the component category most responsible for approximately 19.3% of light water reactor (LWR) power plant shutdowns. This investigation by Burns and Roe, Inc. shows that the greatest cause of shutdowns in LWRs due to valve failures is leakage from valve stem packing. Both BWR plants and PWR plants have stem leakage problems (BWRs, 21% and PWRs, 34%).

  18. A class of self-similar hydrodynamics test problems

    SciTech Connect (OSTI)

    Ramsey, Scott D; Brown, Lowell S; Nelson, Eric M; Alme, Marv L

    2010-12-08

    We consider self-similar solutions to the gas dynamics equations. One such solution - a spherical geometry Gaussian density profile - has been analyzed in the existing literature, and a connection between it, a linear velocity profile, and a uniform specific internal energy profile has been identified. In this work, we assume the linear velocity profile to construct an entire class of self-similar sol utions in both cylindrical and spherical geometry, of which the Gaussian form is one possible member. After completing the derivation, we present some results in the context of a test problem for compressible flow codes.

  19. Computational nuclear quantum many-body problem: The UNEDF project

    SciTech Connect (OSTI)

    Fann, George I [ORNL

    2013-01-01

    The UNEDF project was a large-scale collaborative effort that applied high-performance computing to the nuclear quantum many-body problem. The primary focus of the project was on constructing, validating, and applying an optimized nuclear energy density functional, which entailed a wide range of pioneering developments in microscopic nuclear structure and reactions, algorithms, high-performance computing, and uncertainty quantification. UNEDF demonstrated that close associations among nuclear physicists, mathematicians, and computer scientists can lead to novel physics outcomes built on algorithmic innovations and computational developments. This review showcases a wide range of UNEDF science results to illustrate this interplay.

  20. Application of PDSLin to the magnetic reconnection problem

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of PDSLin to the magnetic reconnection problem This article has been downloaded from IOPscience. Please scroll down to see the full text article. 2013 Comput. Sci. Disc. 6 014002 (http://iopscience.iop.org/1749-4699/6/1/014002) Download details: IP Address: 50.136.219.251 The article was downloaded on 18/04/2013 at 01:26 Please note that terms and conditions apply. View the table of contents for this issue, or go to the journal homepage for more Home Search Collections Journals About Contact us

  1. The Million-Body Problem: Particle Simulations in Astrophysics

    ScienceCinema (OSTI)

    Rasio, Fred [Northwestern University

    2009-09-01

    Computer simulations using particles play a key role in astrophysics. They are widely used to study problems across the entire range of astrophysical scales, from the dynamics of stars, gaseous nebulae, and galaxies, to the formation of the largest-scale structures in the universe. The 'particles' can be anything from elementary particles to macroscopic fluid elements, entire stars, or even entire galaxies. Using particle simulations as a common thread, this talk will present an overview of computational astrophysics research currently done in our theory group at Northwestern. Topics will include stellar collisions and the gravothermal catastrophe in dense star clusters.

  2. Municipal garbage disposal: A problem we cannot ignore

    SciTech Connect (OSTI)

    Not Available

    1989-01-01

    In 1980 the US generated 150 million metric tons of municipal solid waste, and this figure is expected to increase to over 200 million metric tons by 1990. This comment discusses the traditional approaches to waste management, as well as current options available for waste disposal and the federal environmental laws that impinge on these options. Next, the national dimensions of the garbage disposal problem, as epitomized by the garbage barge and the international export of waste generated by this country, are discussed. This Comment concludes with recommendations for a change in public policy to foster recycling, taxing non-biodegradable products, as well as more stringent regulatory controls on solid waste disposal.

  3. The {open_quotes}first{close_quotes} problem

    SciTech Connect (OSTI)

    Holsinger, R.F.

    1995-02-01

    This paper describes the first magnet design problem that Klaus and the author worked on together. At the time, over 30 years ago, Klaus was working as a plasma physicist in the Controlled Thermonuclear Research (CTR) Group, and the author was assigned from the Mechanical Engineering Department to help with the design of experimental equipment for various research projects. Klaus` primary research program was to develop a {open_quotes}plasma gun{close_quotes} for injecting plasma into {open_quotes}mirror machines.{close_quotes} As described, the magnet design aspect of this plasma gun was a challenging task, and led to some innovations that were quite advanced at that time.

  4. Fine tunable red-green upconversion luminescence from glass ceramic containing 5%Er{sup 3+}:NaYF{sub 4} nanocrystals under excitation of two near infrared femtosecond lasers

    SciTech Connect (OSTI)

    Shang, Xiaoying; Cheng, Wenjing; Zhou, Kan; Ma, Jing; Feng, Donghai; Zhang, Shian; Sun, Zhenrong; Jia, Tianqing; Chen, Ping; Qiu, Jianrong

    2014-08-14

    In this paper, we report fine tunable red-green upconversion luminescence of glass ceramic containing 5%Er{sup 3+}: NaYF{sub 4} nanocrystals excited simultaneously by two near infrared femtosecond lasers. When the glass ceramic was irradiated by 800 nm femtosecond laser, weak red emission centered at 670 nm was detected. Bright red light was observed when the fs laser wavelength was tuned to 1490 nm. However, when excited by the two fs lasers simultaneously, the sample emitted bright green light centered at 550 nm, while the red light kept the same intensity. The dependences of the red and the green light intensities on the two pump lasers are much different, which enables us to manipulate the color emission by adjusting the two pump laser intensities, respectively. We present a theoretical model of Er{sup 3+} ions interacting with two fs laser fields, and explain well the experimental results.

  5. Practical approaches to field problems of stationary combustion systems

    SciTech Connect (OSTI)

    Lee, S.W.

    1997-09-01

    The CANMET Energy Technology Centre (CETC) business plan dictates collaboration with industrial clients and other government agencies to promote energy efficiency, health and safety, pollution reduction and productivity enhancement. The Advanced Combustion Technologies group of CETC provides consultation to numerous organizations in combustion related areas by conducting laboratory and field investigations of fossil fuel-fired combustion equipment. CETC, with its modern research facilities and technical expertise, has taken this practical approach since the seventies and has assisted many organizations in overcoming field problems and in providing cost saving measures and improved profit margins. This paper presents a few selected research projects conducted for industrial clients in north and central America. The combustion systems investigated are mostly liquid fuel fired, with the exception of the utility boiler which was coal-fired. The key areas involved include fuel quality, fuel storage/delivery system contamination, waste derived oils, crude oil combustion, unacceptable pollutant emissions, ambient soot deposition, slagging, fouling, boiler component degradation, and particulate characterization. Some of the practical approaches taken to remedy these field problems on several combustion systems including residential, commercial and industrial scale units are discussed.

  6. A scenario for inflationary magnetogenesis without strong coupling problem

    SciTech Connect (OSTI)

    Tasinato, Gianmassimo

    2015-03-23

    Cosmological magnetic fields pervade the entire universe, from small to large scales. Since they apparently extend into the intergalactic medium, it is tantalizing to believe that they have a primordial origin, possibly being produced during inflation. However, finding consistent scenarios for inflationary magnetogenesis is a challenging theoretical problem. The requirements to avoid an excessive production of electromagnetic energy, and to avoid entering a strong coupling regime characterized by large values for the electromagnetic coupling constant, typically allow one to generate only a tiny amplitude of magnetic field during inflation. We propose a scenario for building gauge-invariant models of inflationary magnetogenesis potentially free from these issues. The idea is to derivatively couple a dynamical scalar, not necessarily the inflaton, to fermionic and electromagnetic fields during the inflationary era. Such couplings give additional freedom to control the time-dependence of the electromagnetic coupling constant during inflation. This fact allows us to find conditions to avoid the strong coupling problems that affect many of the existing models of magnetogenesis. We do not need to rely on a particular inflationary set-up for developing our scenario, that might be applied to different realizations of inflation. On the other hand, specific requirements have to be imposed on the dynamics of the scalar derivatively coupled to fermions and electromagnetism, that we are able to satisfy in an explicit realization of our proposal.

  7. On the numerical treatment of problems in atmospheric chemistry

    SciTech Connect (OSTI)

    Aro, C.J.

    1995-09-01

    Atmospheric chemical-radiative-transport (CRT) models are vital in performing research on atmospheric chemical change. Even with the enormous computing capability delivered by massively parallel systems, extended three dimensional CRT simulations are still not computationally feasible. The major obstacle in a CRT model is the nonlinear ODE system describing the chemical kinetics in the model. These ODE systems are usually very stiff and account for anywhere from 75% to 90% of the CPU time required to run a CRT model. In this study, a simple explicit class of time stepping method is developed and demonstrated to be useful in treating chemical ODE systems without the use of a Jacobian matrix. These methods, called preconditioned time differencing methods, are tested on small mathematically idealized problems, box model problems, and full 2-D and 3-D CRT models. The methods are found to be both fast and memory efficient. Studies are performed on both vector and parallel systems. The preconditioned time differencing methods are established as a viable alternative to the more common backward differentiation formulas in terms of CPU speed across architectural platforms.

  8. STUDY OF THE RHIC BPM SMA CONNECTOR FAILURE PROBLEM

    SciTech Connect (OSTI)

    LIAW,C.; SIKORA, R.; SCHROEDER, R.

    2007-06-25

    About 730 BPMs are mounted on the RHIC CQS and Triplet super-conducting magnets. Semi-rigid coaxial cables are used to bring the electrical signal from the BPM feedthroughs to the outside flanges. at the ambient temperature. Every year around 10 cables will lose their signals during the operation. The connection usually failed at the warm end of the cable. The problems were either the solder joint failed or the center conductor retracted out of the SMA connector. Finite element analyses were performed to understand the failure mechanism of the solder joint. The results showed that (1) The SMA center conductor can separate from the mating connector due to the thermal retraction. (2) The maximum thermal stress at the warm end solder joint can exceed the material strength of the Pb37/Sn63 solder material and (3) The magnet ramping frequency (-10 Hz), during the machine startup, can possibly resonant the coaxial cable and damage the solder joints, especially when a fracture is initiated. Test results confirmed that by using the silver bearing solder material (a higher strength material) and by crimping the cable at the locations close to the SMA connector (to prevent the center conductor from retracting) can effectively resolve the connector failure problem.

  9. Approximations of very weak solutions to boundary-value problems.

    SciTech Connect (OSTI)

    Berggren, Martin Olof

    2003-03-01

    Standard weak solutions to the Poisson problem on a bounded domain have square-integrable derivatives, which limits the admissible regularity of inhomogeneous data. The concept of solution may be further weakened in order to define solutions when data is rough, such as for inhomogeneous Dirichlet data that is only square-integrable over the boundary. Such very weak solutions satisfy a nonstandard variational form (u, v) = G(v). A Galerkin approximation combined with an approximation of the right-hand side G defines a finite-element approximation of the very weak solution. Applying conforming linear elements leads to a discrete solution equivalent to the text-book finite-element solution to the Poisson problem in which the boundary data is approximated by L{sub 2}-projections. The L{sub 2} convergence rate of the discrete solution is O(h{sub s}) for some s {element_of} (0,1/2) that depends on the shape of the domain, asserting a polygonal (two-dimensional) or polyhedral (three-dimensional) domain without slits and (only) square-integrable boundary data.

  10. Expert systems applied to two problems in nuclear power plants

    SciTech Connect (OSTI)

    Kim, K.Y.

    1988-01-01

    This dissertation describes two prototype expert systems applied to two problems in nuclear power plants. One problem is spare parts inventory control, and the other one is radionuclide release from containment during severe accident. The expert system for spare parts inventory control can handle spare parts requirements not only in corrective, preventive, or predictive maintenance, but also when failure rates of components or parts are updated by new data. Costs and benefits of spare parts inventory acquisition are evaluated with qualitative attributes such as spare part availability to provide the inventory manager with an improved basis for decision making. The expert system is implemented with Intelligence/Compiler on an IBM-AT. The other expert system for radionuclide release from containment can estimate magnitude, type, location, and time of release of radioactive materials from containment during a severe accident nearly on line, based on the actual measured physical parameters such as temperature and pressure inside the containment. The expert system has a function to check the validation of sensor data. The expert system is implemented with KEE on a Symbolics LISP machine.

  11. Wireless Sensor Networks - Node Localization for Various Industry Problems

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Derr, Kurt; Manic, Milos

    2015-06-01

    Fast, effective monitoring following airborne releases of toxic substances is critical to mitigate risks to threatened population areas. Wireless sensor nodes at fixed predetermined locations may monitor such airborne releases and provide early warnings to the public. A challenging algorithmic problem is determining the locations to place these sensor nodes while meeting several criteria: 1) provide complete coverage of the domain, and 2) create a topology with problem dependent node densities, while 3) minimizing the number of sensor nodes. This manuscript presents a novel approach to determining optimal sensor placement, Advancing Front mEsh generation with Constrained dElaunay Triangulation and Smoothingmore » (AFECETS) that addresses these criteria. A unique aspect of AFECETS is the ability to determine wireless sensor node locations for areas of high interest (hospitals, schools, high population density areas) that require higher density of nodes for monitoring environmental conditions, a feature that is difficult to find in other research work. The AFECETS algorithm was tested on several arbitrary shaped domains. AFECETS simulation results show that the algorithm 1) provides significant reduction in the number of nodes, in some cases over 40%, compared to an advancing front mesh generation algorithm, 2) maintains and improves optimal spacing between nodes, and 3) produces simulation run times suitable for real-time applications.« less

  12. Concrete growth problems and remedial measures at TVA projects

    SciTech Connect (OSTI)

    Hammer, J.J.

    1984-01-01

    Most concrete structures are designed and detailed to provide for a volume decrease without excessive cracking. Occasionally, however, a concrete structure exhibits a long-term increase in volume termed concrete growth. Concrete growth may result from a variety of reactions, such as the hydration of unstable oxides included in the concrete mix, or the oxidation of minerals or from an outside attack of sulfates. The most important reaction creating concrete growth is that between minor alkali hydroxides from cement and the concrete aggregates. Two distinctly different harmful reactions have been recognized: the alkali-silicate and alkali-carbonate reactions. Concrete deteriorating from an alkali-aggregate reaction, regardless of the type, develops an obvious network of cracks called pattern or map cracking. These alkali-aggregate reactions and their accompanying concrete growth have presented numerous problems at TVA's Fontana Dam, Chickamauga Dam and lock, and Hiwassee Dam. Much has been learned about alkali-aggregate reaction since 1940. Most harmful reactions can now be prevented in proposed structures by interpreting the results of standard test methods. It is not possible, however, in existing structures to determine how far the growth phenomenon has progressed, how long the effects will have to be dealt with, or what the future effects will be. A program of close surveillance and monitoring is maintained at these projects, and problems are dealt with as they arise.

  13. Wireless Sensor Networks - Node Localization for Various Industry Problems

    SciTech Connect (OSTI)

    Derr, Kurt; Manic, Milos

    2015-06-01

    Fast, effective monitoring following airborne releases of toxic substances is critical to mitigate risks to threatened population areas. Wireless sensor nodes at fixed predetermined locations may monitor such airborne releases and provide early warnings to the public. A challenging algorithmic problem is determining the locations to place these sensor nodes while meeting several criteria: 1) provide complete coverage of the domain, and 2) create a topology with problem dependent node densities, while 3) minimizing the number of sensor nodes. This manuscript presents a novel approach to determining optimal sensor placement, Advancing Front mEsh generation with Constrained dElaunay Triangulation and Smoothing (AFECETS) that addresses these criteria. A unique aspect of AFECETS is the ability to determine wireless sensor node locations for areas of high interest (hospitals, schools, high population density areas) that require higher density of nodes for monitoring environmental conditions, a feature that is difficult to find in other research work. The AFECETS algorithm was tested on several arbitrary shaped domains. AFECETS simulation results show that the algorithm 1) provides significant reduction in the number of nodes, in some cases over 40%, compared to an advancing front mesh generation algorithm, 2) maintains and improves optimal spacing between nodes, and 3) produces simulation run times suitable for real-time applications.

  14. Statistical optimisation techniques in fatigue signal editing problem

    SciTech Connect (OSTI)

    Nopiah, Z. M.; Osman, M. H.; Baharin, N.; Abdullah, S.

    2015-02-03

    Success in fatigue signal editing is determined by the level of length reduction without compromising statistical constraints. A great reduction rate can be achieved by removing small amplitude cycles from the recorded signal. The long recorded signal sometimes renders the cycle-to-cycle editing process daunting. This has encouraged researchers to focus on the segment-based approach. This paper discusses joint application of the Running Damage Extraction (RDE) technique and single constrained Genetic Algorithm (GA) in fatigue signal editing optimisation.. In the first section, the RDE technique is used to restructure and summarise the fatigue strain. This technique combines the overlapping window and fatigue strain-life models. It is designed to identify and isolate the fatigue events that exist in the variable amplitude strain data into different segments whereby the retention of statistical parameters and the vibration energy are considered. In the second section, the fatigue data editing problem is formulated as a constrained single optimisation problem that can be solved using GA method. The GA produces the shortest edited fatigue signal by selecting appropriate segments from a pool of labelling segments. Challenges arise due to constraints on the segment selection by deviation level over three signal properties, namely cumulative fatigue damage, root mean square and kurtosis values. Experimental results over several case studies show that the idea of solving fatigue signal editing within a framework of optimisation is effective and automatic, and that the GA is robust for constrained segment selection.

  15. A BAYESIAN APPROACH TO LOCATING THE RED GIANT BRANCH TIP MAGNITUDE. II. DISTANCES TO THE SATELLITES OF M31

    SciTech Connect (OSTI)

    Conn, A. R.; Parker, Q. A.; Zucker, D. B.; Ibata, R. A.; Martin, N. F.; Lewis, G. F.; McConnachie, A. W.; Irwin, M. J.; Chapman, S. C.; Tanvir, N.; Fardal, M. A.; Ferguson, A. M. N.; Valls-Gabaud, D.

    2012-10-10

    In 'A Bayesian Approach to Locating the Red Giant Branch Tip Magnitude (Part I)', a new technique was introduced for obtaining distances using the tip of the red giant branch (TRGB) standard candle. Here we describe a useful complement to the technique with the potential to further reduce the uncertainty in our distance measurements by incorporating a matched-filter weighting scheme into the model likelihood calculations. In this scheme, stars are weighted according to their probability of being true object members. We then re-test our modified algorithm using random-realization artificial data to verify the validity of the generated posterior probability distributions (PPDs) and proceed to apply the algorithm to the satellite system of M31, culminating in a three-dimensional view of the system. Further to the distributions thus obtained, we apply a satellite-specific prior on the satellite distances to weight the resulting distance posterior distributions, based on the halo density profile. Thus in a single publication, using a single method, a comprehensive coverage of the distances to the companion galaxies of M31 is presented, encompassing the dwarf spheroidals Andromedas I-III, V, IX-XXVII, and XXX along with NGC 147, NGC 185, M33, and M31 itself. Of these, the distances to Andromedas XXIV-XXVII and Andromeda XXX have never before been derived using the TRGB. Object distances are determined from high-resolution tip magnitude posterior distributions generated using the Markov Chain Monte Carlo technique and associated sampling of these distributions to take into account uncertainties in foreground extinction and the absolute magnitude of the TRGB as well as photometric errors. The distance PPDs obtained for each object both with and without the aforementioned prior are made available to the reader in tabular form. The large object coverage takes advantage of the unprecedented size and photometric depth of the Pan-Andromeda Archaeological Survey. Finally, a

  16. MATHEMATICAL MODELS OF HYSTERESIS (DYNAMIC PROBLEMS IN HYSTERESIS)

    SciTech Connect (OSTI)

    Professor Isaak Mayergoyz

    2006-08-21

    This research has further advanced the current state of the art in the areas of dynamic aspects of hysteresis and nonlinear large scale magnetization dynamics. The results of this research will find important engineering applications in the areas of magnetic data storage technology and the emerging technology of “spintronics”. Our research efforts have been focused on the following tasks: • Study of fast (pulse) precessional switching of magnetization in magnetic materials. • Analysis of critical fields and critical angles for precessional switching of magnetization. • Development of inverse problem approach to the design of magnetic field pulses for precessional switching of magnetization. • Study of magnetization dynamics induced by spin polarized current injection. • Construction of complete stability diagrams for spin polarized current induced magnetization dynamics. • Development of the averaging technique for the analysis of the slow time scale magnetization dynamics. • Study of thermal effects on magnetization dynamics by using the theory of stochastic processes on graphs.

  17. Diagnosing delivery problems in the White House Information Distribution System

    SciTech Connect (OSTI)

    Nahabedian, M.; Shrobe, H.

    1996-12-31

    As part of a collaboration with the White House Office of Media Affairs, members of the MIT Artificial Intelligence Laboratory designed a system, called COMLINK, which distributes a daily stream of documents released by the Office of Media Affairs. Approximately 4000 direct subscribers receive information from this service but more than 100,000 people receive the information through redistribution channels. The information is distributed via Email and the World Wide Web. In such a large scale distribution scheme, there is a constant problem of subscriptions becoming invalid because the user`s Email account has terminated. This causes a backwash of hundreds of {open_quotes}bounced mail{close_quotes} messages per day which must be processed by the operators of the COMLINK system. To manage this annoying but necessary task, an expert system named BMES was developed to diagnose the failures of information delivery.

  18. Monitoring the progress of anytime problem-solving

    SciTech Connect (OSTI)

    Hansen, E.A.; Zilberstein, S.

    1996-12-31

    Anytime algorithms offer a tradeoff between solution quality and computation time that has proved useful in applying artificial intelligence techniques to time-critical problems. To exploit this tradeoff, a system must be able to determine the best time to stop deliberation and act on the currently available solution. When the rate of improvement of solution quality is uncertain, monitoring the progress of the algorithm can improve the utility of the system. This paper introduces a technique for run-time monitoring of anytime algorithms that is sensitive to the variance of the algorithm`s performance, the time-dependent utility of a solution, the ability of the run-time monitor to estimate the quality of the currently available solution, and the cost of monitoring. The paper examines the conditions under which the technique is optimal and demonstrates its applicability.

  19. First results, problems of French deep gasification program

    SciTech Connect (OSTI)

    Gaussens, P.

    1983-01-01

    The development of a technology for the gasification of deep coal reserves that are technically and economically not exploitable by classic mining methods was investigated. The principal problem is the very low permeability of the deep coal which makes it necessary to create an artificial connection between the injection and production wells which is done of hydrofracturing method. The possibilities of an electrical connection are studied. Difficulties related to the spontaneous ignition of the coal and the creation of a backward combustion are revealed. Exploration of the factors that might limit the quality of the gas produced or the quantity of coal extracted by doublet is suggested which should lead to obtaining criteria for site selection. Knowledge of the natural conditions of a site is essential for the decision and the selection of the operating method. The characterization can be obtained by using exploration methods such as coring, logging, surface geophysics.

  20. Ecology problems associated with geothermal development in California

    SciTech Connect (OSTI)

    Shinn, J.H.; Ireland, R.R.

    1980-08-04

    Geothermal power plants have the potential for supplying about 5% of the US electrical generating needs by 1985, and are even now supplying about one third of San Francisco's electricity. Investigations have shown that the typical geothermal field, such as the hot water resource of Imperial Valley, can be developed in an environmentally sound manner when proper considerations are made for ecosystem problems. Experimental evidence is presented pro and con for potential impacts due to habitat disturbance, powerline corridors, noise effects, trace element emissions from cooling towers, accidental brine discharges into aquatic or soil systems, competition for water and H/sub 2/S effects on vegetation. A mitigation and control strategy is recommended for each ecological issue and it is shown where effects are likely to be irreversible.

  1. Inverse problems in heterogeneous and fractured media using peridynamics

    SciTech Connect (OSTI)

    Turner, Daniel Z.; van Bloemen Waanders, Bart G.; Parks, Michael L.

    2015-12-10

    The following work presents an adjoint-based methodology for solving inverse problems in heterogeneous and fractured media using state-based peridynamics. We show that the inner product involving the peridynamic operators is self-adjoint. The proposed method is illustrated for several numerical examples with constant and spatially varying material parameters as well as in the context of fractures. We also present a framework for obtaining material parameters by integrating digital image correlation (DIC) with inverse analysis. This framework is demonstrated by evaluating the bulk and shear moduli for a sample of nuclear graphite using digital photographs taken during the experiment. The resulting measured values correspond well with other results reported in the literature. Lastly, we show that this framework can be used to determine the load state given observed measurements of a crack opening. Furthermore, this type of analysis has many applications in characterizing subsurface stress-state conditions given fracture patterns in cores of geologic material.

  2. Geological aspects of the nuclear waste disposal problem

    SciTech Connect (OSTI)

    Laverov, N.P.; Omelianenko, B.L.; Velichkin, V.I.

    1994-06-01

    For the successful solution of the high-level waste (HLW) problem in Russia one must take into account such factors as the existence of the great volume of accumulated HLW, the large size and variety of geological conditions in the country, and the difficult economic conditions. The most efficient method of HLW disposal consists in the maximum use of protective capacities of the geological environment and in using inexpensive natural minerals for engineered barrier construction. In this paper, the principal trends of geological investigation directed toward the solution of HLW disposal are considered. One urgent practical aim is the selection of sites in deep wells in regions where the HLW is now held in temporary storage. The aim of long-term investigations into HLW disposal is to evaluate geological prerequisites for regional HLW repositories.

  3. Economic analysis of model validation for a challenge problem

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Paez, Paul J.; Paez, Thomas L.; Hasselman, Timothy K.

    2016-02-19

    It is now commonplace for engineers to build mathematical models of the systems they are designing, building, or testing. And, it is nearly universally accepted that phenomenological models of physical systems must be validated prior to use for prediction in consequential scenarios. Yet, there are certain situations in which testing only or no testing and no modeling may be economically viable alternatives to modeling and its associated testing. This paper develops an economic framework within which benefit–cost can be evaluated for modeling and model validation relative to other options. The development is presented in terms of a challenge problem. Asmore » a result, we provide a numerical example that quantifies when modeling, calibration, and validation yield higher benefit–cost than a testing only or no modeling and no testing option.« less

  4. Selected problems of baryon spectroscopy: Chiral soliton versus quark models

    SciTech Connect (OSTI)

    Kopeliovich, V. B.

    2009-05-15

    The inconsistency between the rigid rotator and bound state models at an arbitrary number of colors, the rigid rotator-soft rotator dilemma, and some other problems of baryon spectroscopy are discussed in the framework of the chiral soliton approach (CSA). Consequences of the comparison of CSA results with simple quark models are considered and the 1/N{sub c} expansion for the effective strange antiquark mass is presented, as it follows from the CSA. Strong dependence of the effective strange antiquark mass on the SU(3) multiplet is required to fit the CSA predictions. The difference between 'good' and 'bad' diquark masses, which is about 100 MeV, is in reasonable agreement with other estimates. Multibaryons (hypernuclei) with strangeness are described and some states of interest are also predicted within the CSA.

  5. Users view gas ruling: problems now, gains later

    SciTech Connect (OSTI)

    Hume, M.

    1985-05-20

    Although recent court decisions about natural gas carriage and discount sales programs may cause problems for users in the short term, in the long run they could provide open access on non-discriminatory terms. The programs will continue current operation until July, and the final impact of the decisions will depend upon the response of the Federal Energy Regulatory Commission (FERC) to the court's nullification of its programs. A lapse before establishing new rules could be disruptive. Arguments that the programs boost pipeline profits and unfairly aid dual-fuel users led to the court decision. Refusal to transport gas could generate anti-trust suits against pipelines. FERC expects to issue final rules by the end of summer.

  6. A Geospatial Integrated Problem Solving Environment for Homeland Security Applications

    SciTech Connect (OSTI)

    Koch, Daniel B

    2010-01-01

    Effective planning, response, and recovery (PRR) involving terrorist attacks or natural disasters come with a vast array of information needs. Much of the required information originates from disparate sources in widely differing formats. However, one common attribute the information often possesses is physical location. The organization and visualization of this information can be critical to the success of the PRR mission. Organizing information geospatially is often the most intuitive for the user. In the course of developing a field tool for the U.S. Department of Homeland Security (DHS) Office for Bombing Prevention, a geospatial integrated problem solving environment software framework was developed by Oak Ridge National Laboratory. This framework has proven useful as well in a number of other DHS, Department of Defense, and Department of Energy projects. An overview of the software architecture along with application examples are presented.

  7. Contributions to Sustainability by Communities and Individuals: Problems and Prospects

    SciTech Connect (OSTI)

    MacGregor, D.; Tonn, B.E.

    1998-11-01

    This report examines relationships between a comprehensive set of definitions of and viewpoints on the concept of Sustainability and the abilities of communities and individuals in the United States to meet the behavioral prescriptions inherent in these definitions and viewpoints. This research is timely because sustainability is becoming a cornerstone of national and international environmental strategies designed to simultaneously achieve environmental, economic, and social goals. In the United States, many communities have adopted sustainability principles as the foundation for both their environmental protection efforts and their socioeconomic development initiatives. This research is important because it highlights serious problems communities and inviduals may have in achieving sustainability expectations, and illustrates how much work is needed to help communities and individuals overcome numerous considerable and complex constraints to sustainability.

  8. Expansion-loop enclosure resolves subsea line problems

    SciTech Connect (OSTI)

    Rich, S.K.; Alleyne, A.G.

    1998-08-03

    Recent design and construction of a Gulf of Mexico subsea pipeline illustrate the use of buried, enclosed expansion loops to resolve problems from expansion and upheaval buckling. Buried, subsea pipelines operating at high temperatures and pressures experience extreme compressive loads caused by the axial restraint of the soil. The high axial forces combined with imperfections in the seabed may overstress the pipeline or result in upheaval buckling. Typically, expansion loops, or doglegs, are installed to protect the pipeline risers from expansion and to alleviate axial forces. Buried expansion loops, however, are rendered virtually ineffective by the lateral restraint of the soil. Alternative methods to reduce expansion may increase the potential of upheaval buckling or overstressing the pipeline. Therefore, system design must consider expansion and upheaval buckling together. Discussed here are methods of prevention and control of expansion and upheaval buckling, evaluating the impact on the overall system.

  9. The 2014 Sandia Verification and Validation Challenge: Problem statement

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Hu, Kenneth; Orient, George

    2016-01-18

    This paper presents a case study in utilizing information from experiments, models, and verification and validation (V&V) to support a decision. It consists of a simple system with data and models provided, plus a safety requirement to assess. The goal is to pose a problem that is flexible enough to allow challengers to demonstrate a variety of approaches, but constrained enough to focus attention on a theme. This was accomplished by providing a good deal of background information in addition to the data, models, and code, but directing the participants' activities with specific deliverables. In this challenge, the theme ismore » how to gather and present evidence about the quality of model predictions, in order to support a decision. This case study formed the basis of the 2014 Sandia V&V Challenge Workshop and this resulting special edition of the ASME Journal of Verification, Validation, and Uncertainty Quantification.« less

  10. A More General Solution of the Kenamond HE Problem 2

    SciTech Connect (OSTI)

    Kaul, Ann

    2015-12-15

    A more general solution for programmed burn calculations of the light times produced by an unobstructed line-of-sight, multi-point initiation of a composite HE region has been developed. The equations describing the interfaces between detonation fronts have also been included. In contrast to the original solutions proposed in References 1 and 2, four of the detonators are no longer restricted to specific locations on a Cartesian axis and can be located at any point inside the HE region. For the proposed solution, one detonator must be located at the origin. The more general solution for any locations on the 2D y-axis or 3D z-axis has been implemented in the ExactPack suite of exact solvers for verification problems. It could easily be changed to the most general case outlined above.

  11. Development and Implementation of Radiation-Hydrodynamics Verification Test Problems

    SciTech Connect (OSTI)

    Marcath, Matthew J.; Wang, Matthew Y.; Ramsey, Scott D.

    2012-08-22

    Analytic solutions to the radiation-hydrodynamic equations are useful for verifying any large-scale numerical simulation software that solves the same set of equations. The one-dimensional, spherically symmetric Coggeshall No.9 and No.11 analytic solutions, cell-averaged over a uniform-grid have been developed to analyze the corresponding solutions from the Los Alamos National Laboratory Eulerian Applications Project radiation-hydrodynamics code xRAGE. These Coggeshall solutions have been shown to be independent of heat conduction, providing a unique opportunity for comparison with xRAGE solutions with and without the heat conduction module. Solution convergence was analyzed based on radial step size. Since no shocks are involved in either problem and the solutions are smooth, second-order convergence was expected for both cases. The global L1 errors were used to estimate the convergence rates with and without the heat conduction module implemented.

  12. Problems of organizing zero-effluent production in coking plants

    SciTech Connect (OSTI)

    Maiskii, S.V.; Kagasov, V.M.

    1981-01-01

    The basic method of protecting the environment against pollution by coking plants in the future must be the organization of zero-waste production cycles. Problems associated with the elimination of effluent are considered. In the majority of plants at present, the phenolic effluent formed during coal carbonization and chemical product processing is completely utilized within the plant as a coke quenching medium (the average rate of phenolic effluent formation is 0.4 m/sup 3//ton of dry charge, which equals the irrecoverable water losses in coke quenching operations). However, the increasing adoption of dry coke cooling is inevitably associated with increasing volumes of surplus effluent which cannot be disposed of in coke quenching towers. As a result of experiments it was concluded that: 1. The utilization of phenolic effluent in closed-cycle watercooling systems does not entirely solve the effluent disposal problem. The volume of surplus effluent depends on the volume originally formed, the rate of consuming water in circulation and the time of year. In order to dispose of surplus effluent, wet quenching must be retained for a proportion of the coke produced. 2. The greatest hazards in utilizing phenolic effluent in closed-cycle watercooling systems are corrosion and the build-up of suspended solids. The water must be filtered and biochemically purified before it is fed into the closed-cycle watercooling systems. The total ammonia content after purification should not exceed 100 to 150 mg/l. 3. Stormwater and thawed snow can be used in closed-cycle water supply systems after purification. 4. The realization of zero-effluent conditions in existing plants will require modifications to the existing water supply systems.

  13. How does pressure gravitate? Cosmological constant problem confronts observational cosmology

    SciTech Connect (OSTI)

    Narimani, Ali; Scott, Douglas; Afshordi, Niayesh E-mail: nafshordi@pitp.ca

    2014-08-01

    An important and long-standing puzzle in the history of modern physics is the gross inconsistency between theoretical expectations and cosmological observations of the vacuum energy density, by at least 60 orders of magnitude, otherwise known as the cosmological constant problem. A characteristic feature of vacuum energy is that it has a pressure with the same amplitude, but opposite sign to its energy density, while all the precision tests of General Relativity are either in vacuum, or for media with negligible pressure. Therefore, one may wonder whether an anomalous coupling to pressure might be responsible for decoupling vacuum from gravity. We test this possibility in the context of the Gravitational Aether proposal, using current cosmological observations, which probe the gravity of relativistic pressure in the radiation era. Interestingly, we find that the best fit for anomalous pressure coupling is about half-way between General Relativity (GR), and Gravitational Aether (GA), if we include Planck together with WMAP and BICEP2 polarization cosmic microwave background (CMB) observations. Taken at face value, this data combination excludes both GR and GA at around the 3 σ level. However, including higher resolution CMB observations (''highL'') or baryonic acoustic oscillations (BAO) pushes the best fit closer to GR, excluding the Gravitational Aether solution to the cosmological constant problem at the 4- 5 σ level. This constraint effectively places a limit on the anomalous coupling to pressure in the parametrized post-Newtonian (PPN) expansion, ζ{sub 4} = 0.105 ± 0.049 (+highL CMB), or ζ{sub 4} = 0.066 ± 0.039 (+BAO). These represent the most precise measurement of this parameter to date, indicating a mild tension with GR (for ΛCDM including tensors, with 0ζ{sub 4}=), and also among different data sets.

  14. Nuclear disarmament, disposal of military plutonium and international security problems

    SciTech Connect (OSTI)

    Slipchenko, V.S.; Rybatchenkov, V.

    1995-12-31

    One of the major issues of the current debate deals with the question: what does real nuclear disarmament actually involve? It becomes more and more obvious for many experts that it can no longer be limited to the reduction or elimination of delivery vehicles alone, but must necessarily cove the warheads and the fissile materials recovered from them, which should totally or partially be committed to peaceful use and placed under appropriate international safeguards, thus precluding their re-use for as weapons. There are various options as to how to solve the problems of disposal of fissile materials released from weapons. The optimal choice can only be made on the basis of a thorough study. This study should treat the disposal of weapon-grade plutonium and weapon-grade uranium as separate problems. The possible options for plutonium disposition currently discussed are as follows: (a) Storage in a form or under conditions not suitable for use in the production of new types of nuclear weapons. This option seems to be most natural and inevitable at the first phase, subject to determination of storage period, volume, and technology. Besides, the requirements of the international nuclear weapons nonproliferation regime could be met easily. Safe, secure, and controlled temporary storage may provide an appropriate solution of disposal of weapon-grade plutonium in the near future. (b) Energy utilization (conversion) of weapon-grade plutonium. The most efficient option of utilization of plutonium appears to be for nuclear power generation. This option does not exclude storage, but considers it as a temporary phase, which can, however, be a prolonged one: its length is determined by the political decisions made and possibilities existing to transfer plutonium for processing.

  15. Forecasting changes in water quality in rivers associated with growing biofuels in the Arkansas-White-Red river drainage, USA

    SciTech Connect (OSTI)

    Jager, Henriette I.; Baskaran, Latha M.; Schweizer, Peter E.; Turhollow, Anthony F.; Brandt, Craig C.; Srinivasan, Raghavan

    2014-05-15

    We study that the mid-section of the Arkansas-White-Red (AWR) river basin near the 100th parallel is particularly promising for sustainable biomass production using cellulosic perennial crops and residues. Along this longitudinal band, precipitation becomes limiting to competing crops that require irrigation from an increasingly depleted groundwater aquifer. In addition, the deep-rooted perennial, switchgrass, produces modest-to-high yields in this region with minimal inputs and could compete against alternative crops and land uses at relatively low cost. Previous studies have also suggested that switchgrass and other perennial feedstocks offer environmentally benign alternatives to corn and corn stover. However, water quality implications remain a significant concern for conversion of marginal lands to bioenergy production because excess nutrients produced by agriculture for food or for energy contribute to eutrophication in the dead-zone in the Gulf of Mexico. This study addresses water quality implications for the AWR river basin. We used the SWAT model to compare water quality in rivers draining a baseline, pre-cellulosic-bioenergy and post-cellulosic-bioenergy landscapes for 2022 and 2030. Simulated water quality responses varied across the region, but with a net tendency toward decreased amounts of nutrient and sediment, particularly in subbasins with large areas of bioenergy crops in 2030 future scenarios. We conclude that water quality is one aspect of sustainability for which cellulosic bioenergy production in this region holds promise.

  16. THREE DISCRETE GROUPS WITH HOMOGENEOUS CHEMISTRY ALONG THE RED GIANT BRANCH IN THE GLOBULAR CLUSTER NGC2808

    SciTech Connect (OSTI)

    Carretta, E.

    2014-11-10

    We present the homogeneous reanalysis of Mg and Al abundances from high resolution UVES/FLAMES spectra for 31 red giants in the globular cluster NGC2808. We found a well defined Mg-Al anticorrelation reaching a regime of subsolar Mg abundance ratios, with a spread of about 1.4dex in [Al/Fe]. The main result from the improved statistics of our sample is that the distribution of stars is not continuous along the anticorrelation because they are neatly clustered into three distinct clumps, each with different chemical compositions. One group (P) shows a primordial composition of field stars of similar metallicity, and the other two (I and E) have increasing abundances of Al and decreasing abundances of Mg. The fraction of stars we found in the three components (P: 68%, I: 19%, E: 13%) is in excellent agreement with the ratios computed for the three distinct main sequences in NGC2808: for the first time there is a clear correspondence between discrete photometric sequences of dwarfs and distinct groups of giants with homogeneous chemistry. The composition of the I group cannot be reproduced by mixing of matter with extreme processing in hot H-burning and gas with pristine, unprocessed composition, as also found in the recent analysis of three discrete groups in NGC6752. This finding suggests that different classes of polluters were probably at work in NGC2808 as well.

  17. Disruption of a red giant star by a supermassive black hole and the case of PS1-10jh

    SciTech Connect (OSTI)

    Bogdanovi?, Tamara; Cheng, Roseanne M.; Amaro-Seoane, Pau E-mail: rcheng@gatech.edu

    2014-06-20

    The development of a new generation of theoretical models for tidal disruptions is timely, as increasingly diverse events are being captured in surveys of the transient sky. Recently, Gezari et al. reported a discovery of a new class of tidal disruption events: the disruption of a helium-rich stellar core, thought to be a remnant of a red giant (RG) star. Motivated by this discovery and in anticipation of others, we consider tidal interaction of an RG star with a supermassive black hole (SMBH) which leads to the stripping of the stellar envelope and subsequent inspiral of the compact core toward the black hole. Once the stellar envelope is removed the inspiral of the core is driven by tidal heating as well as the emission of gravitational radiation until the core either falls into the SMBH or is tidally disrupted. In the case of the tidal disruption candidate PS1-10jh, we find that there is a set of orbital solutions at high eccentricities in which the tidally stripped hydrogen envelope is accreted by the SMBH before the helium core is disrupted. This places the RG core in a portion of parameter space where strong tidal heating can lift the degeneracy of the compact remnant and disrupt it before it reaches the tidal radius. We consider how this sequence of events explains the puzzling absence of the hydrogen emission lines from the spectrum of PS1-10jh and gives rise to its other observational features.

  18. The effect of solvents on the stabilities (color and Fe) of anthocyanin isolated from the red-color-melinjo peels

    SciTech Connect (OSTI)

    Tarmizi, Ermiziar E-mail: ermitarmizi@gmail.com; Saragih, Raskita; Lalasari, Latifa Hanum E-mail: lati003@lipi.go.id

    2015-12-29

    Anthocyanin from the red-color-melinjo peels could be isolated using a polar solvent (ethanol) [ermiziar, 2010]. The amount of hydrocarbons in the structure of anthocyanin might cause that anthocyanin could be isolated using a non polar solvent. The purpose of research is to isolate anthocyanin using non polar solvents (hexane and petroleum ether) with maceration steps for 24 hours and separate solvents using rotary evaporator equipment. The stability of anthocyanin could be observed every week (1,2,3 and 4 weeks) in various environmental conditions (with or without light in refrigerator and open or closed storage). The characterization of anthocyanin was analyzed with visual (physic photo) and or using equipments such as Fourier Transform Infrared Spectroscopy (FTIR) for determining functional groups, Ultraviolet–Visible Spectroscopy (UV/Vis) with 500-550 nm wavelengths for deciding absorption of anthocyanin and atomic absorption spectroscopy (AAS) for analyzing Fe element. The result showed that anthocyanin isolation with hexane solvent has yield higher than petroleum eter solvent. From the results of physic observation for 4 weeks looked that there are changing colors of samples significant after 3 and 4 weeks in cooler with or without light. The stability of anthocyanin color was the best on the storage time until 2 weeks using hexane solvent in refrigerator and closed condition that it has absorption of 0.6740 with 500 nm wavelengths and Fe concentration 6.29 ppm.

  19. The vast population of Wolf-Rayet and red supergiant stars in M101. I. Motivation and first results

    SciTech Connect (OSTI)

    Shara, Michael M.; Bibby, Joanne L.; Zurek, David; Crowther, Paul A.; Moffat, Anthony F. J.; Drissen, Laurent

    2013-12-01

    Assembling a catalog of at least 10,000 Wolf-Rayet (W-R) stars is an essential step in proving (or disproving) that these stars are the progenitors of Type Ib and Type Ic supernovae. To this end, we have used the Hubble Space Telescope (HST) to carry out a deep, He II optical narrowband imaging survey of the ScI spiral galaxy M101. Almost the entire galaxy was imaged with the unprecedented depth and resolution that only the HST affords. Differenced with archival broadband images, the narrowband images allow us to detect much of the W-R star population of M101. We describe the extent of the survey and our images, as well as our data reduction procedures. A detailed broadband-narrowband imaging study of a field east of the center of M101, containing the giant star-forming region NGC 5462, demonstrates our completeness limits, how we find W-R candidates, their properties and spatial distribution, and how we rule out most contaminants. We use the broadband images to locate luminous red supergiant (RSG) candidates. The spatial distributions of the W-R and RSG stars near NGC 5462 are strikingly different. W-R stars dominate the complex core, while RSGs dominate the complex halo. Future papers in this series will describe and catalog more than a thousand W-R and RSG candidates that are detectable in our images, as well as spectra of many of those candidates.

  20. Recent seafloor metallogeneses: examples from the Atlantis II Deep, Red Sea and 21/sup 0/N East Pacific Rise

    SciTech Connect (OSTI)

    Zierenberg, R.A.

    1983-01-01

    Massive sulfide from 21/sup 0/N East Pacific Rise consists of pyrrhotite, cubic cubanite, wurtzite, chalcopyrite, pyrite, sphalerite, marcasite, and traces of galena. The samples show a complex paragenesis with extensive replacement and sulfur isotope disequilibrium. Sulfides in the Atlantis II Deep, Red Sea are very fine grained pyrrhotite, cubic cubanite, chalcopyrite, sphalerite, and pyrite which are interlayered with iron phyllosilicates. Epigenetic veins cutting unlithified metalliferous sediment in the Atlantis II are the conduits for the entry or new hot brine into the Deep. Vein mineralogy is dominated by talc and anhydrite with subordinate sulfides and phyllosilicates. Vertical zoning of vein minerals is related to cooling of hydrothermal fluid. Stable isotope ratios indicate depositional temperatures up to 300/sup 0/C. Stable isotope ratios also suggest that cooling of the hydrothermal fluid is caused by mixing with cooler brine having the approximate composition of the lower brine layer. Geochemical modeling of mixing successfully predicts the observed vertical zonation. The 21/sup 0/N East Pacific Rise deposit and the Atlantis II Deep have similar geochemical systems dominated by interaction with hot tholeiitic basalt. The differences in the deposits are related to their different depositional environments. The 21/sup 0/N East Pacific Rise deposit is forming directly on the seafloor in contact with cold oxygenated seawater, while the Atlantis II Deep deposit is forming beneath a warm, saline, anoxic brine pool.