Powered by Deep Web Technologies
Note: This page contains sample records for the topic "addressee source pm-o" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

[Addressee] Dear [Copyright Holder  

E-Print Network [OSTI]

that they can be retrieved by a search engine. o use all or portions of the digital reproductions of the work ABOVE: [Type name of addressee below signature line] [Date] [If company, include name of company

Devoto, Stephen H.

2

SOURCE?  

Energy Savers [EERE]

Department of Energy (DOE) in partnership with Lawrence Berkeley National Laboratory (LBNL), is an open-source code package designed to be a common, low-cost, standardized tool...

3

Radiation source  

DOE Patents [OSTI]

A device and method for relativistic electron beam heating of a high-density plasma in a small localized region. A relativistic electron beam generator or accelerator produces a high-voltage electron beam which propagates along a vacuum drift tube and is modulated to initiate electron bunching within the beam. The beam is then directed through a low-density gas chamber which provides isolation between the vacuum modulator and the relativistic electron beam target. The relativistic beam is then applied to a high-density target plasma which typically comprises DT, DD, or similar thermonuclear gas at a density of 10.sup.17 to 10.sup.20 electrons per cubic centimeter. The target gas is ionized prior to application of the relativistic electron beam by means of a laser or other preionization source to form a plasma. Utilizing a relativistic electron beam with an individual particle energy exceeding 3 MeV, classical scattering by relativistic electrons passing through isolation foils is negligible. As a result, relativistic streaming instabilities are initiated within the high-density target plasma causing the relativistic electron beam to efficiently deposit its energy into a small localized region of the high-density plasma target.

Thode, Lester E. (Los Alamos, NM)

1981-01-01T23:59:59.000Z

4

Electrolytes for power sources  

DOE Patents [OSTI]

Electrolytes are disclosed for power sources, particularly alkaline and acidic power sources, comprising benzene polysulfonic acids and benzene polyphosphonic acids or salts of such acids. 7 figures.

Doddapaneni, N.; Ingersoll, D.

1995-01-03T23:59:59.000Z

5

Protected Water Sources (Iowa)  

Broader source: Energy.gov [DOE]

This chapter designates protected water sources, which are subject to additional special conditions regarding water use. Permit applications for water withdrawals from these sources may still be...

6

GEOMETRIC SOURCE SEPARATION: MERGING CONVOLUTIVE SOURCE  

E-Print Network [OSTI]

adaptive beamforming algorithms by a cross-power criteria, we gain new geometric source separation with convo- lutive blind source separation. We concentrate on cross-power spectral min- imization which is su to ambiguities in the choice of separating lters. There are in theory multiple lters that invert the room

Parra, Lucas C.

7

DC source assemblies  

DOE Patents [OSTI]

Embodiments of DC source assemblies of power inverter systems of the type suitable for deployment in a vehicle having an electrically grounded chassis are provided. An embodiment of a DC source assembly comprises a housing, a DC source disposed within the housing, a first terminal, and a second terminal. The DC source also comprises a first capacitor having a first electrode electrically coupled to the housing, and a second electrode electrically coupled to the first terminal. The DC source assembly further comprises a second capacitor having a first electrode electrically coupled to the housing, and a second electrode electrically coupled to the second terminal.

Campbell, Jeremy B; Newson, Steve

2013-02-26T23:59:59.000Z

8

Dynamic radioactive particle source  

DOE Patents [OSTI]

A method and apparatus for providing a timed, synchronized dynamic alpha or beta particle source for testing the response of continuous air monitors (CAMs) for airborne alpha or beta emitters is provided. The method includes providing a radioactive source; placing the radioactive source inside the detection volume of a CAM; and introducing an alpha or beta-emitting isotope while the CAM is in a normal functioning mode.

Moore, Murray E.; Gauss, Adam Benjamin; Justus, Alan Lawrence

2012-06-26T23:59:59.000Z

9

SOURCE SELECTION INFORMATION -  

Office of Environmental Management (EM)

on Energy and Water Development U.S. House of Representatives The Honorable Lamar Alexander Ranking Member SOURCE SELECTION INFORMATION - SEE FEDERAL ACQUISITION...

10

SOURCE SELECTION INFORMATION -  

Energy Savers [EERE]

on Energy and Water Development U.S. House of Representatives The Honorable Lamar Alexander SOURCE SELECTION INFORMATION - SEE FEDERAL ACQUISITION REGULATION (FAR)...

11

Radiation Source Replacement Workshop  

SciTech Connect (OSTI)

This report summarizes a Radiation Source Replacement Workshop in Houston Texas on October 27-28, 2010, which provided a forum for industry and researchers to exchange information and to discuss the issues relating to replacement of AmBe, and potentially other isotope sources used in well logging.

Griffin, Jeffrey W.; Moran, Traci L.; Bond, Leonard J.

2010-12-01T23:59:59.000Z

12

Lithium ion sources  

E-Print Network [OSTI]

HIFAN 1866 Lithium ion sources by Prabir K. Roy, Wayne G.No. DE-AC02-05CH11231. Lithium ion sources Prabir K. RoyUSA Abstract A 10.9 cm diameter lithium alumino-silicate ion

Roy, Prabir K.

2014-01-01T23:59:59.000Z

13

Neutron sources and applications  

SciTech Connect (OSTI)

Review of Neutron Sources and Applications was held at Oak Brook, Illinois, during September 8--10, 1992. This review involved some 70 national and international experts in different areas of neutron research, sources, and applications. Separate working groups were asked to (1) review the current status of advanced research reactors and spallation sources; and (2) provide an update on scientific, technological, and medical applications, including neutron scattering research in a number of disciplines, isotope production, materials irradiation, and other important uses of neutron sources such as materials analysis and fundamental neutron physics. This report summarizes the findings and conclusions of the different working groups involved in the review, and contains some of the best current expertise on neutron sources and applications.

Price, D.L. [ed.] [Argonne National Lab., IL (United States); Rush, J.J. [ed.] [National Inst. of Standards and Technology, Gaithersburg, MD (United States)

1994-01-01T23:59:59.000Z

14

Photonic crystal light source  

DOE Patents [OSTI]

A light source is provided by a photonic crystal having an enhanced photonic density-of-states over a band of frequencies and wherein at least one of the dielectric materials of the photonic crystal has a complex dielectric constant, thereby producing enhanced light emission at the band of frequencies when the photonic crystal is heated. The dielectric material can be a metal, such as tungsten. The spectral properties of the light source can be easily tuned by modification of the photonic crystal structure and materials. The photonic crystal light source can be heated electrically or other heating means. The light source can further include additional photonic crystals that exhibit enhanced light emission at a different band of frequencies to provide for color mixing. The photonic crystal light source may have applications in optical telecommunications, information displays, energy conversion, sensors, and other optical applications.

Fleming, James G. (Albuquerque, NM); Lin, Shawn-Yu (Albuquerque, NM); Bur, James A. (Corrales, NM)

2004-07-27T23:59:59.000Z

15

Piezotube borehole seismic source  

DOE Patents [OSTI]

A piezoelectric borehole source capable of permanent or semipermanent insertion into a well for uninterrupted well operations is described. The source itself comprises a series of piezoelectric rings mounted to an insulative mandrel internally sized to fit over a section of well tubing, the rings encased in a protective housing and electrically connected to a power source. Providing an AC voltage to the rings will cause expansion and contraction sufficient to create a sonic pulse. The piezoelectric borehole source fits into a standard well, and allows for uninterrupted pass-through of production tubing, and other tubing and electrical cables. Testing using the source may be done at any time, even concurrent with well operations, during standard production.

Daley, Tom M; Solbau, Ray D; Majer, Ernest L

2014-05-06T23:59:59.000Z

16

Pulsed ion beam source  

DOE Patents [OSTI]

An improved pulsed ion beam source having a new biasing circuit for the fast magnetic field. This circuit provides for an initial negative bias for the field created by the fast coils in the ion beam source which pre-ionize the gas in the source, ionize the gas and deliver the gas to the proper position in the accelerating gap between the anode and cathode assemblies in the ion beam source. The initial negative bias improves the interaction between the location of the nulls in the composite magnetic field in the ion beam source and the position of the gas for pre-ionization and ionization into the plasma as well as final positioning of the plasma in the accelerating gap. Improvements to the construction of the flux excluders in the anode assembly are also accomplished by fabricating them as layered structures with a high melting point, low conductivity material on the outsides with a high conductivity material in the center.

Greenly, John B. (Lansing, NY)

1997-01-01T23:59:59.000Z

17

Addressee Identification in Face-to-Face Meetings Natasa Jovanovic, Rieks op den Akker and Anton Nijholt  

E-Print Network [OSTI]

al., 2003; van Turnhout et al., 2005), human-human- robot interaction (Katzenmaier et al., 2004 of multi-party face-to-face conversation, Ot- suka et al. (2005) proposed a framework for automating

Nijholt, Anton

18

Tunable terahertz radiation source  

SciTech Connect (OSTI)

Terahertz radiation source and method of producing terahertz radiation, said source comprising a junction stack, said junction stack comprising a crystalline material comprising a plurality of self-synchronized intrinsic Josephson junctions; an electrically conductive material in contact with two opposing sides of said crystalline material; and a substrate layer disposed upon at least a portion of both the crystalline material and the electrically-conductive material, wherein the crystalline material has a c-axis which is parallel to the substrate layer, and wherein the source emits at least 1 mW of power.

Boulaevskii, Lev; Feldmann, David M; Jia, Quanxi; Koshelev, Alexei; Moody, Nathan A

2014-01-21T23:59:59.000Z

19

Microfabricated diffusion source  

DOE Patents [OSTI]

A microfabricated diffusion source to provide for a controlled diffusion rate of a vapor comprises a porous reservoir formed in a substrate that can be filled with a liquid, a headspace cavity for evaporation of the vapor therein, a diffusion channel to provide a controlled diffusion of the vapor, and an outlet to release the vapor into a gas stream. The microfabricated diffusion source can provide a calibration standard for a microanalytical system. The microanalytical system with an integral diffusion source can be fabricated with microelectromechanical systems technologies.

Oborny, Michael C. (Albuquerque, NM); Frye-Mason, Gregory C. (Cedar Crest, NM); Manginell, Ronald P. (Albuquerque, NM)

2008-07-15T23:59:59.000Z

20

A surface ionization source  

E-Print Network [OSTI]

The main part of the work described herein is the development and testing of a surface ionization source for use on a collinear fast beam laser spectroscopy apparatus. A description of the previously existing fast beam apparatus is given...

Buzatu, Daniel J.

1995-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "addressee source pm-o" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

National Synchrotron Light Source  

ScienceCinema (OSTI)

A tour of Brookhaven's National Synchrotron Light Source (NSLS). The NSLS is one of the world's most widely used scientific research facilities, hosting more than 2,500 guest researchers each year. The NSLS provides intense beams of infrared, ultraviole

None

2010-01-08T23:59:59.000Z

22

Galactic Superluminal Sources  

E-Print Network [OSTI]

A new class of X-ray sources was clearly established with the discovery of highly relativistic radio jets from the galactic sources GRS 1915+105 and GRO J1655-40. Both of these objects have given us a broader view of black holes and the formation of jets, yet they also show the complexity of the accretion environment near relativistic objects. The fast apparent motion of the jets, their luminosity and variability, their high energy spectrum, and approximate scaling to the behavior of active galactic nuclei, certainly warrant the description "microquasar". I present a review of the observational data on these sources, and discuss where we stand on a physical picture of GRS 1915+105 and GRO J1655-40 as taken from multi-wavelength studies. I also point out other galactic sources which share some of the properties of the microquasars, and what to look for as a high energy "signature" in future observations.

B. A. Harmon

1998-12-21T23:59:59.000Z

23

ION SOURCES FOR CYCLOTRONS  

E-Print Network [OSTI]

These utilize lasers, plasma focus, sparks, and ex≠ plodingextractor voltage A plasma focus device has been used byf n a s Fig. 22: The plasma focus high charge state source

Clark, D.J.

2010-01-01T23:59:59.000Z

24

Computerized Energy Information Sources  

E-Print Network [OSTI]

Many computerized files of energy- and energy conservation-related information are currently available through commercial and governmental sources such as Lockheed Information Systems, System Development Corporation, and DOE/RECON. Private...

Gordon, D.

1979-01-01T23:59:59.000Z

25

Field emission electron source  

DOE Patents [OSTI]

A novel field emitter material, field emission electron source, and commercially feasible fabrication method is described. The inventive field emission electron source produces reliable electron currents of up to 400 mA/cm.sup.2 at 200 volts. The emitter is robust and the current it produces is not sensitive to variability of vacuum or the distance between the emitter tip and the cathode. The novel emitter has a sharp turn-on near 100 volts.

Zettl, Alexander Karlwalter (Kensington, CA); Cohen, Marvin Lou (Berkeley, CA)

2000-01-01T23:59:59.000Z

26

National Synchrotron Light Source  

ScienceCinema (OSTI)

A tour of Brookhaven's National Synchrotron Light Source (NSLS), hosted by Associate Laboratory Director for Light Sources, Stephen Dierker. The NSLS is one of the world's most widely used scientific research facilities, hosting more than 2,500 guest researchers each year. The NSLS provides intense beams of infrared, ultraviolet, and x-ray light for basic and applied research in physics, chemistry, medicine, geophysics, environmental, and materials sciences.

BNL

2009-09-01T23:59:59.000Z

27

Magnetron sputtering source  

DOE Patents [OSTI]

A magnetron sputtering source for sputtering coating substrates includes a high thermal conductivity electrically insulating ceramic and magnetically attached sputter target which can eliminate vacuum sealing and direct fluid cooling of the cathode assembly. The magnetron sputtering source design results in greater compactness, improved operating characteristics, greater versatility, and low fabrication cost. The design easily retrofits most sputtering apparatuses and provides for safe, easy, and cost effective target replacement, installation, and removal.

Makowiecki, Daniel M. (Livermore, WA); McKernan, Mark A. (Livermore, CA); Grabner, R. Fred (Brentwood, CA); Ramsey, Philip B. (Livermore, CA)

1994-01-01T23:59:59.000Z

28

Magnetron sputtering source  

DOE Patents [OSTI]

A magnetron sputtering source for sputtering coating substrates includes a high thermal conductivity electrically insulating ceramic and magnetically attached sputter target which can eliminate vacuum sealing and direct fluid cooling of the cathode assembly. The magnetron sputtering source design results in greater compactness, improved operating characteristics, greater versatility, and low fabrication cost. The design easily retrofits most sputtering apparatuses and provides for safe, easy, and cost effective target replacement, installation, and removal. 12 figs.

Makowiecki, D.M.; McKernan, M.A.; Grabner, R.F.; Ramsey, P.B.

1994-08-02T23:59:59.000Z

29

Pulsed ion beam source  

DOE Patents [OSTI]

An improved pulsed ion beam source is disclosed having a new biasing circuit for the fast magnetic field. This circuit provides for an initial negative bias for the field created by the fast coils in the ion beam source which pre-ionize the gas in the source, ionize the gas and deliver the gas to the proper position in the accelerating gap between the anode and cathode assemblies in the ion beam source. The initial negative bias improves the interaction between the location of the nulls in the composite magnetic field in the ion beam source and the position of the gas for pre-ionization and ionization into the plasma as well as final positioning of the plasma in the accelerating gap. Improvements to the construction of the flux excluders in the anode assembly are also accomplished by fabricating them as layered structures with a high melting point, low conductivity material on the outsides with a high conductivity material in the center. 12 figs.

Greenly, J.B.

1997-08-12T23:59:59.000Z

30

Dual source heat pump  

DOE Patents [OSTI]

What is disclosed is a heat pump apparatus for conditioning a fluid characterized by a fluid handler and path for circulating the fluid in heat exchange relationship with a refrigerant fluid; at least two refrigerant heat exchangers, one for effecting heat exchange with the fluid and a second for effecting heat exchange between refrigerant and a heat exchange fluid and the ambient air; a compressor for efficiently compressing the refrigerant; at least one throttling valve for throttling liquid refrigerant; a refrigerant circuit; refrigerant; a source of heat exchange fluid; heat exchange fluid circulating device and heat exchange fluid circuit for circulating the heat exchange fluid in heat exchange relationship with the refrigerant; and valves or switches for selecting the heat exchangers and direction of flow of the refrigerant therethrough for selecting a particular mode of operation. The heat exchange fluid provides energy for defrosting the second heat exchanger when operating in the air source mode and also provides a alternate source of heat.

Ecker, Amir L. (Dallas, TX); Pietsch, Joseph A. (Dallas, TX)

1982-01-01T23:59:59.000Z

31

INEEL Source Water Assessment  

SciTech Connect (OSTI)

The Idaho National Engineering and Environmental Laboratory (INEEL) covers approximately 890 mi2 and includes 12 public water systems that must be evaluated for Source water protection purposes under the Safe Drinking Water Act. Because of its size and location, six watersheds and five aquifers could potentially affect the INEELís drinking water sources. Based on a preliminary evaluation of the available information, it was determined that the Big Lost River, Birch Creek, and Little Lost River Watersheds and the eastern Snake River Plain Aquifer needed to be assessed. These watersheds were delineated using the United States Geologic Surveyís Hydrological Unit scheme. Well capture zones were originally estimated using the RESSQC module of the Environmental Protection Agencyís Well Head Protection Area model, and the initial modeling assumptions and results were checked by running several scenarios using Modflow modeling. After a technical review, the resulting capture zones were expanded to account for the uncertainties associated with changing groundwater flow directions, a thick vadose zone, and other data uncertainties. Finally, all well capture zones at a given facility were merged to a single wellhead protection area at each facility. A contaminant source inventory was conducted, and the results were integrated with the well capture zones, watershed and aquifer information, and facility information using geographic information system technology to complete the INEELís Source Water Assessment. Of the INEELís 12 public water systems, three systems rated as low susceptibility (EBR-I, Main Gate, and Gun Range), and the remainder rated as moderate susceptibility. No INEEL public water system rated as high susceptibility. We are using this information to develop a source water management plan from which we will subsequently implement an INEEL-wide source water management program. The results are a very robust set of wellhead protection areas that will protect the INEELís public water systems yet not too conservative to inhibit the INEEL from carrying out its missions.

Sehlke, Gerald

2003-03-01T23:59:59.000Z

32

COMBUSTION SOURCES OF NITROGEN COMPOUNDS  

E-Print Network [OSTI]

Rasmussen, R.A. (1976). Combustion as a source of nitrousx control for stationary combustion sources. Prog. Energy,CA, March 3-4, 1977 COMBUSTION SOURCES OF NITROGEN COMPOUNDS

Brown, Nancy J.

2011-01-01T23:59:59.000Z

33

OLED area illumination source  

DOE Patents [OSTI]

The present invention relates to an area illumination light source comprising a plurality of individual OLED panels. The individual OLED panels are configured in a physically modular fashion. Each OLED panel comprising a plurality of OLED devices. Each OLED panel comprises a first electrode and a second electrode such that the power being supplied to each individual OLED panel may be varied independently. A power supply unit capable of delivering varying levels of voltage simultaneously to the first and second electrodes of each of the individual OLED panels is also provided. The area illumination light source also comprises a mount within which the OLED panels are arrayed.

Foust, Donald Franklin (Scotia, NY); Duggal, Anil Raj (Niskayuna, NY); Shiang, Joseph John (Niskayuna, NY); Nealon, William Francis (Gloversville, NY); Bortscheller, Jacob Charles (Clifton Park, NY)

2008-03-25T23:59:59.000Z

34

Selective ion source  

DOE Patents [OSTI]

A ion source is described wherein selected ions maybe extracted to the exclusion of unwanted ion species of higher ionization potential. Also described is a method of producing selected ions from a compound, such as P{sup +} from PH{sub 3}. The invention comprises a plasma chamber, an electron source, a means for introducing a gas to be ionized by electrons from the electron source, means for limiting electron energy from the electron source to a value between the ionization energy of the selected ion species and the greater ionization energy of an unwanted ion specie, and means for extracting the target ion specie from the plasma chamber. In one embodiment, the electrons are generated in a plasma cathode chamber immediately adjacent to the plasma chamber. A small extractor draws the electrons from the plasma cathode chamber into the relatively positive plasma chamber. The energy of the electrons extracted in this manner is easily controlled. The invention is particularly useful for doping silicon with P{sup +}, As{sup +}, and B{sup +} without the problematic presence of hydrogen, helium, water, or carbon oxide ions. Doped silicon is important for manufacture of semiconductors and semiconductor devices. 6 figs.

Leung, K.N.

1996-05-14T23:59:59.000Z

35

Selective ion source  

DOE Patents [OSTI]

A ion source is described wherein selected ions maybe extracted to the exclusion of unwanted ion species of higher ionization potential. Also described is a method of producing selected ions from a compound, such as P.sup.+ from PH.sub.3. The invention comprises a plasma chamber, an electron source, a means for introducing a gas to be ionized by electrons from the electron source, means for limiting electron energy from the electron source to a value between the ionization energy of the selected ion species and the greater ionization energy of an unwanted ion specie, and means for extracting the target ion specie from the plasma chamber. In one embodiment, the electrons are generated in a plasma cathode chamber immediately adjacent to the plasma chamber. A small extractor draws the electrons from the plasma cathode chamber into the relatively positive plasma chamber. The energy of the electrons extracted in this manner is easily controlled. The invention is particularly useful for doping silicon with P.sup.+, AS.sup.+, and B.sup.+ without the problematic presence of hydrogen, helium, water, or carbon oxide ions. Doped silicon is important for manufacture of semiconductors and semiconductor devices.

Leung, Ka-Ngo (Hercules, CA)

1996-01-01T23:59:59.000Z

36

Sealed Radioactive Source Accountability  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

To establish Department of Energy (DOE) interim policy and to provide guidance for sealed radioactive source accountability. The directive does not cancel any directives. Extended by DOE N 5400.10 to 12-24-93 & Extended by DOE N 5400.12 to 12-24-94.

1991-12-24T23:59:59.000Z

37

Sealed Radioactive Source Accountability  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

This Notice extends DOE N 5400.9, Sealed Radioactive Source Accountability, of 12-24-91, until 12-24-95, unless sooner superseded or rescinded. The contents of DOE N 5400.9 will be updated and incorporated in the revised DOE O 5480.11, Radiation Protection for Occupational Workers.

1994-12-22T23:59:59.000Z

38

Calibrated vapor generator source  

DOE Patents [OSTI]

A portable vapor generator is disclosed that can provide a controlled source of chemical vapors, such as, narcotic or explosive vapors. This source can be used to test and calibrate various types of vapor detection systems by providing a known amount of vapors to the system. The vapor generator is calibrated using a reference ion mobility spectrometer. A method of providing this vapor is described, as follows: explosive or narcotic is deposited on quartz wool, placed in a chamber that can be heated or cooled (depending on the vapor pressure of the material) to control the concentration of vapors in the reservoir. A controlled flow of air is pulsed over the quartz wool releasing a preset quantity of vapors at the outlet. 10 figs.

Davies, J.P.; Larson, R.A.; Goodrich, L.D.; Hall, H.J.; Stoddard, B.D.; Davis, S.G.; Kaser, T.G.; Conrad, F.J.

1995-09-26T23:59:59.000Z

39

Voltage controlled current source  

DOE Patents [OSTI]

A seven decade, voltage controlled current source is described for use in testing intermediate range nuclear instruments that covers the entire test current range of from 10 picoamperes to 100 microamperes. High accuracy is obtained throughout the entire seven decades of output current with circuitry that includes a coordinated switching scheme responsive to the input signal from a hybrid computer to control the input voltage to an antilog amplifier, and to selectively connect a resistance to the antilog amplifier output to provide a continuous output current source as a function of a preset range of input voltage. An operator controlled switch provides current adjustment for operation in either a real-time simulation test mode or a time response test mode.

Casne, Gregory M. (Pittsburgh, PA)

1992-01-01T23:59:59.000Z

40

Evaluated teletherapy source library  

DOE Patents [OSTI]

The Evaluated Teletherapy Source Library (ETSL) is a system of hardware and software that provides for maintenance of a library of useful phase space descriptions (PSDs) of teletherapy sources used in radiation therapy for cancer treatment. The PSDs are designed to be used by PEREGRINE, the all-particle Monte Carlo dose calculation system. ETSL also stores other relevant information such as monitor unit factors (MUFs) for use with the PSDs, results of PEREGRINE calculations using the PSDs, clinical calibration measurements, and geometry descriptions sufficient for calculational purposes. Not all of this information is directly needed by PEREGRINE. It also is capable of acting as a repository for the Monte Carlo simulation history files from which the generic PSDs are derived.

Cox, Lawrence J. (Los Alamos, NM); Schach Von Wittenau, Alexis E. (Livermore, CA)

2000-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "addressee source pm-o" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

The European Spallation Source  

SciTech Connect (OSTI)

The European Spallation Source (ESS) is a 5 MW, 2.5 GeV long pulse proton linac, to be built and commissioned in Lund, Sweden. The Accelerator Design Update (ADU) project phase is under way, to be completed at the end of 2012 by the delivery of a Technical Design Report. Improvements to the 2003 ESS design will be summarised, and the latest design activities will be presented.

Peggs, S; Eshraqi, M; Hahn, H; Jansson, A; Lindroos, M; Ponton, A; Rathsman, K; Trahern, G; Bousso, S; Calaga, R; Devanz, G; Duperrier, R D; Eguia, J; Gammino, S; Moller, S P; Oyon, C; Ruber, R.J.M.Y.

2011-03-01T23:59:59.000Z

42

Capillary discharge source  

DOE Patents [OSTI]

Debris generation from an EUV electric discharge plasma source device can be significantly reduced or essentially eliminated by encasing the electrodes with dielectric or electrically insulating material so that the electrodes are shielded from the plasma, and additionally by providing a path for the radiation to exit wherein the electrodes are not exposed to the area where the radiation is collected. The device includes: (a) a body, which is made of an electrically insulating material, that defines a capillary bore that has a proximal end and a distal end and that defines at least one radiation exit; (b) a first electrode that defines a first channel that has a first inlet end that is connected to a source of gas and a first outlet end that is in communication with the capillary bore, wherein the first electrode is positioned at the distal end of the capillary bore; (c) a second electrode that defines a second channel that has a second inlet end that is in communication with the capillary bore and an outlet end, wherein the second electrode is positioned at the proximal end of the capillary bore; and (d) a source of electric potential that is connected across the first and second electrodes, wherein radiation generated within the capillary bore is emitted through the at least one radiation exit and wherein the first electrode and second electrode are shielded from the emitted radiation.

Bender, III, Howard Albert

2003-11-25T23:59:59.000Z

43

SYNCHROTRON RADIATION SOURCES  

SciTech Connect (OSTI)

Synchrotron radiation is a very bright, broadband, polarized, pulsed source of light extending from the infrared to the x-ray region. It is an extremely important source of Vacuum Ultraviolet radiation. Brightness is defined as flux per unit area per unit solid angle and is normally a more important quantity than flux alone particularly in throughput limited applications which include those in which monochromators are used. It is well known from classical theory of electricity and magnetism that accelerating charges emit electromagnetic radiation. In the case of synchrotron radiation, relativistic electrons are accelerated in a circular orbit and emit electromagnetic radiation in a broad spectral range. The visible portion of this spectrum was first observed on April 24, 1947 at General Electric's Schenectady facility by Floyd Haber, a machinist working with the synchrotron team, although the first theoretical predictions were by Lienard in the latter part of the 1800's. An excellent early history with references was presented by Blewett and a history covering the development of the utilization of synchrotron radiation was presented by Hartman. Synchrotron radiation covers the entire electromagnetic spectrum from the infrared region through the visible, ultraviolet, and into the x-ray region up to energies of many 10's of kilovolts. If the charged particles are of low mass, such as electrons, and if they are traveling relativistically, the emitted radiation is very intense and highly collimated, with opening angles of the order of 1 milliradian. In electron storage rings there are three possible sources of synchrotron radiation; dipole (bending) magnets; wigglers, which act like a sequence of bending magnets with alternating polarities; and undulators, which are also multi-period alternating magnet systems but in which the beam deflections are small resulting in coherent interference of the emitted light.

HULBERT,S.L.; WILLIAMS,G.P.

1998-07-01T23:59:59.000Z

44

Compact ion accelerator source  

DOE Patents [OSTI]

An ion source includes a conductive substrate, the substrate including a plurality of conductive nanostructures with free-standing tips formed on the substrate. A conductive catalytic coating is formed on the nanostructures and substrate for dissociation of a molecular species into an atomic species, the molecular species being brought in contact with the catalytic coating. A target electrode placed apart from the substrate, the target electrode being biased relative to the substrate with a first bias voltage to ionize the atomic species in proximity to the free-standing tips and attract the ionized atomic species from the substrate in the direction of the target electrode.

Schenkel, Thomas; Persaud, Arun; Kapadia, Rehan; Javey, Ali

2014-04-29T23:59:59.000Z

45

The European Spallation Source  

SciTech Connect (OSTI)

In 2003 the joint European effort to design a European Spallation Source (ESS) resulted in a set of reports, and in May 2009 Lund was agreed to be the ESS site. The ESS Scandinavia office has since then worked on setting all the necessary legal and organizational matters in place so that the Design Update and construction can be started in January 2011, in collaboration with European partners. The Design Update phase is expected to end in 2012, to be followed by a construction phase, with first neutrons expected in 2018-2019.

Lindroos M.; Calaga R.; Bousson S.; Danared H.; Devanz G. et al

2011-04-20T23:59:59.000Z

46

Photon Source Parameters  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 - September 2006 TheStevenAdministrationPhotometric Variations asPhoton Source

47

Source Selection Guide  

Broader source: Energy.gov (indexed) [DOE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment of Energy U.S.Improve Emitter Efficiency Under High-Current Operation Source

48

Source Selection Guide  

Broader source: Energy.gov (indexed) [DOE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment of Energy U.S.Improve Emitter Efficiency Under High-Current Operation Source

49

SOURCE SELECTION INFORMATION -  

Office of Environmental Management (EM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of EnergyEnergyENERGY TAXBalancedDepartmentRestrictions onSBBiodiesel | DepartmentSLACofof98-02|10,SOURCE

50

Photon Source Parameters  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas ConchasPassive Solar Home Design Passive SolarCenter |Photoinduced electronPhoton Source

51

Sources of tritium  

SciTech Connect (OSTI)

A review of tritium sources is presented. The tritium production and release rates are discussed for light water reactors (LWRs), heavy water reactors (HWRs), high temperature gas cooled reactors (HTGRs), liquid metal fast breeder reactors (LMFBRs), and molten salt breeder reactors (MSBRs). In addition, release rates are discussed for tritium production facilities, fuel reprocessing plants, weapons detonations, and fusion reactors. A discussion of the chemical form of the release is included. The energy producing facilities are ranked in order of increasing tritium production and release. The ranking is: HTGRs, LWRs, LMFBRs, MSBRs, and HWRs. The majority of tritium has been released in the form of tritiated water.

Phillips, J.E.; Easterly, C.E.

1980-12-01T23:59:59.000Z

52

Federal Funding Sources of Information Sources for Automatic Funding Notices  

E-Print Network [OSTI]

;Federal Funding Sources of Information r Grant Programs & Deadlines q World Health Organization - GrantFederal Funding Sources of Information Sources for Automatic Funding Notices q Catalogue of Federal Domestic Assistance q Grants.Gov q FedBizOpps q The Foundation Center r RFP Bulletin r Philanthropy News

53

Advanced Photon Source Upgrade Project  

ScienceCinema (OSTI)

Upgrade to Advanced Photon Source announced by Department Of Energy. Read more: http://go.usa.gov/ivZ

Mitchell, John; Gibson, Murray; Young, Linda; Joachimiak, Andrzej

2013-04-19T23:59:59.000Z

54

Infrared source test  

SciTech Connect (OSTI)

The purpose of the Infrared Source Test (IRST) is to demonstrate the ability to track a ground target with an infrared sensor from an airplane. The system is being developed within the Advance Technology Program`s Theater Missile Defense/Unmanned Aerial Vehicle (UAV) section. The IRST payload consists of an Amber Radiance 1 infrared camera system, a computer, a gimbaled mirror, and a hard disk. The processor is a custom R3000 CPU board made by Risq Modular Systems, Inc. for LLNL. The board has ethernet, SCSI, parallel I/O, and serial ports, a DMA channel, a video (frame buffer) interface, and eight MBytes of main memory. The real-time operating system VxWorks has been ported to the processor. The application code is written in C on a host SUN 4 UNIX workstation. The IRST is the result of a combined effort by physicists, electrical and mechanical engineers, and computer scientists.

Ott, L.

1994-11-15T23:59:59.000Z

55

Thulium-170 heat source  

DOE Patents [OSTI]

An isotopic heat source is formed using stacks of thin individual layers of a refractory isotopic fuel, preferably thulium oxide, alternating with layers of a low atomic weight diluent, preferably graphite. The graphite serves several functions: to act as a moderator during neutron irradiation, to minimize bremsstrahlung radiation, and to facilitate heat transfer. The fuel stacks are inserted into a heat block, which is encased in a sealed, insulated and shielded structural container. Heat pipes are inserted in the heat block and contain a working fluid. The heat pipe working fluid transfers heat from the heat block to a heat exchanger for power conversion. Single phase gas pressure controls the flow of the working fluid for maximum heat exchange and to provide passive cooling.

Walter, Carl E. (Pleasanton, CA); Van Konynenburg, Richard (Livermore, CA); VanSant, James H. (Tracy, CA)

1992-01-01T23:59:59.000Z

56

Multiple source heat pump  

DOE Patents [OSTI]

A heat pump apparatus for conditioning a fluid characterized by a fluid handler and path for circulating a fluid in heat exchange relationship with a refrigerant fluid, at least three refrigerant heat exchangers, one for effecting heat exchange with the fluid, a second for effecting heat exchange with a heat exchange fluid, and a third for effecting heat exchange with ambient air; a compressor for compressing the refrigerant; at least one throttling valve connected at the inlet side of a heat exchanger in which liquid refrigerant is vaporized; a refrigerant circuit; refrigerant; a source of heat exchange fluid; heat exchange fluid circuit and pump for circulating the heat exchange fluid in heat exchange relationship with the refrigerant; and valves or switches for selecting the heat exchangers and directional flow of refrigerant therethrough for selecting a particular mode of operation. Also disclosed are a variety of embodiments, modes of operation, and schematics therefor.

Ecker, Amir L. (Duncanville, TX)

1983-01-01T23:59:59.000Z

57

In-Source Fragmentation and the Sources of Partially Tryptic...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

using three biological samples, including a standard protein mixture, a mouse brain tissue homogenate, and a mouse plasma sample. Since the in-source fragments of a...

58

Portable Source Identification Device  

SciTech Connect (OSTI)

U.S. Customs and Border Protection (CBP) is the primary enforcement agency protecting the nationís ports of entry. CBP is enhancing its capability to interdict the illicit import of nuclear and radiological materials and devices that may be used by terrorists. Pacific Northwest National Laboratory (PNNL) is providing scientific and technical support to CBP in their goal to enable rapid deployment of nuclear and radiation detection systems at U. S. ports of entry to monitor 100% of the incoming international traffic and cargo while not adversely impacting the operations or throughput of the ports. As the deployment of radiation detection systems proceeds, there is a need to adapt the baseline radiation portal monitor (RPM) system technology to operations at these diverse ports of entry. When screening produces an alarm in the primary inspection RPM, the alarming vehicle is removed from the flow of commerce and the alarm is typically confirmed in a secondary inspection RPM. The portable source identification device (PSID) is a radiation sensor panel (RSP), based on thallium-doped sodium iodide (NaI(Tl)) scintillation detector and gamma spectroscopic analysis hardware and software, mounted on a scissor lift on a small truck. The lift supports a box containing a commercial off-the-shelf (COTS) sodium iodide detector that provides real-time isotopic identification, including neutron detectors to interdict Weapons of Mass Destruction (WMD) and radiation dispersion devices (RDD). The scissor lift will lower the detectors to within a foot off the ground and raise them to approximately 24 feet in the air, allowing a wide vertical scanning range.

Andersen, Eric S.; Samuel, Todd J.; Gervais, Kevin L.

2005-08-01T23:59:59.000Z

59

Constricted glow discharge plasma source  

DOE Patents [OSTI]

A constricted glow discharge chamber and method are disclosed. The polarity and geometry of the constricted glow discharge plasma source is set so that the contamination and energy of the ions discharged from the source are minimized. The several sources can be mounted in parallel and in series to provide a sustained ultra low source of ions in a plasma with contamination below practical detection limits. The source is suitable for applying films of nitrides such as gallium nitride and oxides such as tungsten oxide and for enriching other substances in material surfaces such as oxygen and water vapor, which are difficult process as plasma in any known devices and methods. The source can also be used to assist the deposition of films such as metal films by providing low-energy ions such as argon ions.

Anders, Andre (Albany, CA); Anders, Simone (Albany, CA); Dickinson, Michael (San Leandro, CA); Rubin, Michael (Berkeley, CA); Newman, Nathan (Winnetka, IL)

2000-01-01T23:59:59.000Z

60

Linac Coherent Light Source Overview  

ScienceCinema (OSTI)

Take an animated tour of the Linac Coherent Light Source (LCLS). Follow the laser pulse from the injector gun all the way through to the Far Experimental Hall.

None

2013-05-29T23:59:59.000Z

Note: This page contains sample records for the topic "addressee source pm-o" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Linac Coherent Light Source Overview  

Broader source: Energy.gov [DOE]

Take an animated tour of the Linac Coherent Light Source (LCLS). Follow the laser pulse from the injector gun all the way through to the Far Experimental Hall.

62

Alternative Energy Sources Ė Myths and Realities  

E-Print Network [OSTI]

Alternative Energy Sources - Myths and Realities Walterneed to think about alternative energy sources; the worlddepletion of oil? Alternative energy sources can be divided

Youngquist, Walter

1998-01-01T23:59:59.000Z

63

Hollow electrode plasma excitation source  

DOE Patents [OSTI]

A plasma source incorporates a furnace as a hollow anode, while a coaxial cathode is disposed therewithin. The source is located in a housing provided with an ionizable gas such that a glow discharge is produced between anode and cathode. Radiation or ionic emission from the glow discharge characterizes a sample placed within the furnace and heated to elevated temperatures. 5 figs.

Ballou, N.E.

1992-04-14T23:59:59.000Z

64

BSTBacterial Source Tracking Conference Proceedings  

E-Print Network [OSTI]

BSTBacterial Source Tracking Conference Proceedings 2012 Bacterial Source Tracking State Conference Conference Proceedings Prepared by: Lucas Gregory, Texas Water Resources Institute Courtney Smith of the Science Conference Texas Water Resources Institute TR-427 June 2012 #12;#12;Texas Water Resources

65

Particle Acceleration in Astrophysical Sources  

E-Print Network [OSTI]

Astrophysical sources are extremely efficient accelerators. Some sources emit photons up to multi-TeV energies, a signature of the presence, within them, of particles with energies much higher than those achievable with the largest accelerators on Earth. Even more compelling evidence comes from the study of Cosmic Rays, charged relativistic particles that reach the Earth with incredibly high energies: at the highest energy end of their spectrum, these subatomic particles are carrying a macroscopic energy, up to a few Joules. Here I will address the best candidate sources and mechanisms as cosmic particle accelerators. I will mainly focus on Galactic sources such as Supernova Remnants and Pulsar Wind Nebulae, which being close and bright, are the best studied among astrophysical accelerators. These sources are held responsible for most of the energy that is put in relativistic particles in the Universe, but they are not thought to accelerate particles up to the highest individual energies, $\\approx 10^{20}$ eV...

Amato, Elena

2015-01-01T23:59:59.000Z

66

Sealed source peer review plan  

SciTech Connect (OSTI)

Sealed sources are known quantities of radioactive materials that have been encapsulated in quantities that produce known radiation fields. Sealed sources have multiple uses ranging from instrument calibration sources to sources that produce radiation fields for experimental applications. The Off-Site Source Recovery (OSR) Project at Los Alamos National Laboratory (LANL), created in 1999, under the direction of the Waste Management Division of the U.S. Department of Energy (DOE) Albuquerque has been assigned the responsibility to recover and manage excess and unwanted radioactive sealed sources from the public and private sector. LANL intends to ship drums containing qualified sealed sources to the Waste Isolation Pilot Plant (WIPP) for disposal. Prior to shipping, these drums must be characterized with respect to radiological content and other parameters. The U. S. Environmental Protection Agency (EPA) requires that ten radionulcides be quantified and reported for every container of waste to be disposed in the WIPP. The methods traditionally approved by the EPA include non-destructive assay (NDA) in accordance with Appendix A of the Contact-Handled Transuranic Waste Acceptance Criteria for the Waste Isolation Pilot Plant (DOE, 2002) (CH WAC). However, because of the nature and pedigree of historical records for sealed sources and the technical infeasibility of performing NDA on these sources, LANL proposes to characterize the content of these waste drums using qualified existing radiological data in lieu of direct measurement. This plan describes the process and documentation requirements for the use of the peer review process to qualify existing data for sealed radiological sources in lieu of perfonning radioassay. The peer review process will be performed in accordance with criteria provided in 40 CFR {section} 194.22 which specifies the use of the NUREG 1297 guidelines. The plan defines the management approach, resources, schedule, and technical requirements for the subject peer review.

Feldman, Alexander [Los Alamos National Laboratory; Leonard, Lee [RETIRED; Burns, Ron [CONTRACTOR

2009-01-01T23:59:59.000Z

67

Environmental Technology Verification of Mobile Sources Control...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Environmental Technology Verification of Mobile Sources Control Technologies Environmental Technology Verification of Mobile Sources Control Technologies 2005 Diesel Engine...

68

Diversity employment and recruitment sources  

SciTech Connect (OSTI)

Effective human resources management has been identified as one of four critical success factors in the Department of Energy Strategic Plan. The Plan states relative to this factor: ``The Department seeks greater alignment of resources with agency priorities and increased diversification of the workforce, including gender, ethnicity, age, and skills. This diversification will bring new thinking and perspectives that heretofore have not had a voice in departmental decision-making.`` This Guide has been developed as a key tool to assist Department of Energy management and administrative staff in achieving Goal 2 of this critical success factor, which is to ``Ensure a diverse and talented workforce.`` There are numerous sources from which to recruit minorities, women and persons with disabilities. Applying creativity and proactive effort, using traditional and non-traditional approaches, and reaching out to various professional, academic and social communities will increase the reservoir of qualified candidates from which to make selections. In addition, outreach initiatives will undoubtedly yield further benefits such as a richer cultural understanding and diversity awareness. The resource listings presented in this Guide are offered to encourage active participation in the diversity recruitment process. This Guide contains resource listings by state for organizations in the following categories: (1) African American Recruitment Sources; (2) Asian American/Pacific Islander Recruitment Sources; (3) Hispanic Recruitment Sources; (4) Native American/Alaskan Native Recruitment Sources; (5) Persons with Disabilities Recruitment Sources; and (6) Women Recruitment Sources.

Not Available

1994-08-01T23:59:59.000Z

69

International Data on Radiological Sources  

SciTech Connect (OSTI)

ABSTRACT The mission of radiological dispersal device (RDD) nuclear forensics is to identify the provenance of nuclear and radiological materials used in RDDs and to aid law enforcement in tracking nuclear materials and routes. The application of databases to radiological forensics is to match RDD source material to a source model in the database, provide guidance regarding a possible second device, and aid the FBI by providing a short list of manufacturers and distributors, and ultimately to the last legal owner of the source. The Argonne/Idaho National Laboratory RDD attribution database is a powerful technical tool in radiological forensics. The database (1267 unique vendors) includes all sealed sources and a device registered in the U.S., is complemented by data from the IAEA Catalogue, and is supported by rigorous in-lab characterization of selected sealed sources regarding physical form, radiochemical composition, and age-dating profiles. Close working relationships with global partners in the commercial sealed sources industry provide invaluable technical information and expertise in the development of signature profiles. These profiles are critical to the down-selection of potential candidates in either pre- or post- event RDD attribution. The down-selection process includes a match between an interdicted (or detonated) source and a model in the database linked to one or more manufacturers and distributors.

Martha Finck; Margaret Goldberg

2010-07-01T23:59:59.000Z

70

Three chamber negative ion source  

DOE Patents [OSTI]

It is an object of this invention provide a negative ion source which efficiently provides a large flux of negatively ionized particles. This invention provides a volume source of negative ions which has a current density sufficient for magnetic fusion applications and has electrons suppressed from the output. It is still another object of this invention to provide a volume source of negative ions which can be electrostatically accelerated to high energies and subsequently neutralized to form a high energy neutral beam for use with a magnetically confined plasma.

Leung, K.N.; Ehlers, K.W.; Hiskes, J.R.

1983-11-10T23:59:59.000Z

71

Radiation source with shaped emission  

DOE Patents [OSTI]

Employing a source of radiation, such as an electric discharge source, that is equipped with a capillary region configured into some predetermined shape, such as an arc or slit, can significantly improve the amount of flux delivered to the lithographic wafers while maintaining high efficiency. The source is particularly suited for photolithography systems that employs a ringfield camera. The invention permits the condenser which delivers critical illumination to the reticle to be simplified from five or more reflective elements to a total of three or four reflective elements thereby increasing condenser efficiency. It maximizes the flux delivered and maintains a high coupling efficiency. This architecture couples EUV radiation from the discharge source into a ring field lithography camera.

Kubiak, Glenn D.; Sweatt, William C.

2003-05-13T23:59:59.000Z

72

Next Generation Light Source Workshops  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Next Generation Light Source Workshops A series of workshops will be held in late August with the goal of refining the scientific drivers for the facility and translating the...

73

Multilevel cascade voltage source inverter with seperate DC sources  

DOE Patents [OSTI]

A multilevel cascade voltage source inverter having separate DC sources is described herein. This inverter is applicable to high voltage, high power applications such as flexible AC transmission systems (FACTS) including static VAR generation (SVG), power line conditioning, series compensation, phase shifting and voltage balancing and fuel cell and photovoltaic utility interface systems. The M-level inverter consists of at least one phase wherein each phase has a plurality of full bridge inverters equipped with an independent DC source. This inverter develops a near sinusoidal approximation voltage waveform with only one switching per cycle as the number of levels, M, is increased. The inverter may have either single-phase or multi-phase embodiments connected in either wye or delta configurations.

Peng, Fang Zheng (Oak Ridge, TN); Lai, Jih-Sheng (Knoxville, TN)

1997-01-01T23:59:59.000Z

74

Multilevel cascade voltage source inverter with separate DC sources  

DOE Patents [OSTI]

A multilevel cascade voltage source inverter having separate DC sources is described herein. This inverter is applicable to high voltage, high power applications such as flexible AC transmission systems (FACTS) including static VAR generation (SVG), power line conditioning, series compensation, phase shifting and voltage balancing and fuel cell and photovoltaic utility interface systems. The M-level inverter consists of at least one phase wherein each phase has a plurality of full bridge inverters equipped with an independent DC source. This inverter develops a near sinusoidal approximation voltage waveform with only one switching per cycle as the number of levels, M, is increased. The inverter may have either single-phase or multi-phase embodiments connected in either wye or delta configurations. 15 figs.

Peng, F.Z.; Lai, J.S.

1997-06-24T23:59:59.000Z

75

Multilevel cascade voltage source inverter with seperate DC sources  

DOE Patents [OSTI]

A multilevel cascade voltage source inverter having separate DC sources is described herein. This inverter is applicable to high voltage, high power applications such as flexible AC transmission systems (FACTS) including static VAR generation (SVG), power line conditioning, series compensation, phase shifting and voltage balancing and fuel cell and photovoltaic utility interface systems. The M-level inverter consists of at least one phase wherein each phase has a plurality of full bridge inverters equipped with an independent DC source. This inverter develops a near sinusoidal approximation voltage waveform with only one switching per cycle as the number of levels, M, is increased. The inverter may have either single-phase or multi-phase embodiments connected in either wye or delta configurations.

Peng, Fang Zheng (Knoxville, TN); Lai, Jih-Sheng (Blacksburg, VA)

2002-01-01T23:59:59.000Z

76

Research on fusion neutron sources  

SciTech Connect (OSTI)

The use of fusion devices as powerful neutron sources has been discussed for decades. Whereas the successful route to a commercial fusion power reactor demands steady state stable operation combined with the high efficiency required to make electricity production economic, the alternative approach to advancing the use of fusion is free of many of complications connected with the requirements for economic power generation and uses the already achieved knowledge of Fusion physics and developed Fusion technologies. 'Fusion for Neutrons' (F4N), has now been re-visited, inspired by recent progress achieved on comparably compact fusion devices, based on the Spherical Tokamak (ST) concept. Freed from the requirement to produce much more electricity than used to drive it, a fusion neutron source could be efficiently used for many commercial applications, and also to support the goal of producing energy by nuclear power. The possibility to use a small or medium size ST as a powerful or intense steady-state fusion neutron source (FNS) is discussed in this paper in comparison with the use of traditional high aspect ratio tokamaks. An overview of various conceptual designs of compact fusion neutron sources based on the ST concept is given and they are compared with a recently proposed Super Compact Fusion Neutron Source (SCFNS), with major radius as low as 0.5 metres but still able to produce several MW of neutrons in a steady-state regime.

Gryaznevich, M. P. [Tokamak Solutions UK, Culham Science Centre, Abingdon, OXON, OX133DB (United Kingdom)

2012-06-19T23:59:59.000Z

77

Miniature x-ray source  

DOE Patents [OSTI]

A miniature x-ray source utilizing a hot filament cathode. The source has a millimeter scale size and is capable of producing broad spectrum x-ray emission over a wide range of x-ray energies. The miniature source consists of a compact vacuum tube assembly containing the hot filament cathode, an anode, a high voltage feedthru for delivering high voltage to the cathode, a getter for maintaining high vacuum, a connector for initial vacuum pump down and crimp-off, and a high voltage connection for attaching a compact high voltage cable to the high voltage feedthru. At least a portion of the vacuum tube wall is fabricated from highly x-ray transparent materials, such as sapphire, diamond, or boron nitride.

Trebes, James E. (Livermore, CA); Bell, Perry M. (Tracy, CA); Robinson, Ronald B. (Modesto, CA)

2000-01-01T23:59:59.000Z

78

Miniature x-ray source  

DOE Patents [OSTI]

A miniature x-ray source capable of producing broad spectrum x-ray emission over a wide range of x-ray energies. The miniature x-ray source comprises a compact vacuum tube assembly containing a cathode, an anode, a high voltage feedthru for delivering high voltage to the anode, a getter for maintaining high vacuum, a connection for an initial vacuum pump down and crimp-off, and a high voltage connection for attaching a compact high voltage cable to the high voltage feedthru. At least a portion of the vacuum tube wall is highly x-ray transparent and made, for example, from boron nitride. The compact size and potential for remote operation allows the x-ray source, for example, to be placed adjacent to a material sample undergoing analysis or in proximity to the region to be treated for medical applications.

Trebes, James E. (Livermore, CA); Stone, Gary F. (Livermore, CA); Bell, Perry M. (Tracy, CA); Robinson, Ronald B. (Modesto, CA); Chornenky, Victor I. (Minnetonka, MN)

2002-01-01T23:59:59.000Z

79

Compact portable electric power sources  

SciTech Connect (OSTI)

This report provides an overview of recent advances in portable electric power source (PEPS) technology and an assessment of emerging PEPS technologies that may meet US Special Operations Command`s (SOCOM) needs in the next 1--2- and 3--5-year time frames. The assessment was performed through a literature search and interviews with experts in various laboratories and companies. Nineteen PEPS technologies were reviewed and characterized as (1) PEPSs that meet SOCOM requirements; (2) PEPSs that could fulfill requirements for special field conditions and locations; (3) potentially high-payoff sources that require additional R and D; and (4) sources unlikely to meet present SOCOM requirements. 6 figs., 10 tabs.

Fry, D.N.; Holcomb, D.E.; Munro, J.K.; Oakes, L.C.; Matson, M.J.

1997-02-01T23:59:59.000Z

80

SOURCE PHENOMENOLOGY EXPERIMENTS IN ARIZONA  

SciTech Connect (OSTI)

The Arizona Source Phenomenology Experiments (SPE) have resulted in an important dataset for the nuclear monitoring community. The 19 dedicated single-fired explosions and multiple delay-fired mining explosions were recorded by one of the most densely instrumented accelerometer and seismometer arrays ever fielded, and the data have already proven useful in quantifying confinement and excitation effects for the sources. It is very interesting to note that we have observed differences in the phenomenology of these two series of explosions resulting from the differences between the relatively slow (limestone) and fast (granodiorite) media. We observed differences at the two SPE sites in the way the rock failed during the explosions, how the S-waves were generated, and the amplitude behavior as a function of confinement. Our consortium's goal is to use the synergy of the multiple datasets collected during this experiment to unravel the phenomenological differences between the two emplacement media. The data suggest that the main difference between single-fired chemical and delay-fired mining explosion seismograms at regional distances is the increased surface wave energy for the latter source type. The effect of the delay-firing is to decrease the high-frequency P-wave amplitudes while increasing the surface wave energy because of the longer source duration and spall components. The results suggest that the single-fired explosions are surrogates for nuclear explosions in higher frequency bands (e.g., 6-8 Hz Pg/Lg discriminants). We have shown that the SPE shots, together with the mining explosions, are efficient sources of S-wave energy, and our next research stage is to postulate the possible sources contributing to the shear-wave energy.

Jessie L. Bonner; Brian Stump; Mark Leidig; Heather Hooper; Xiaoning (David) Yang; Rongmao Zhou; Tae Sung Kim; William R. Walter; Aaron Velasco; Chris Hayward; Diane Baker; C. L. Edwards; Steven Harder; Travis Glenn; Cleat Zeiler; James Britton; James F. Lewkowicz

2005-09-30T23:59:59.000Z

Note: This page contains sample records for the topic "addressee source pm-o" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

A global sourcing strategy for durable tooling  

E-Print Network [OSTI]

Competitive pressures in manufacturing industries have led to an increased utilization of strategic sourcing initiatives: among them is low cost sourcing. While low cost sourcing has been used extensively for direct ...

Vasovski, Steven

2006-01-01T23:59:59.000Z

82

Source selection of agricultural journalists in Texas  

E-Print Network [OSTI]

Journalists rely on sources in their daily routines, and the sources they choose affect news content over time. Agricultural journalists are no exception. Eleven agricultural journalists in Texas were studied to determine what types of sources...

Banks, Penelope Jean

1998-01-01T23:59:59.000Z

83

MODELING, SIMULATION AND OPTIMIZATION OF GROUND SOURCE  

E-Print Network [OSTI]

MODELING, SIMULATION AND OPTIMIZATION OF GROUND SOURCE HEAT PUMP SYSTEMS By MUHAMMAD HAIDER KHAN AND OPTIMIZATION OF GROUND SOURCE HEAT PUMP SYSTEMS Thesis Approved..................................................................................................................... 1 1.1 Overview of Ground Source Heat Pump Systems.............................................. 1 1

84

Major Source Permits (District of Columbia)  

Broader source: Energy.gov [DOE]

The District reviews designs for new pollution sources and design modifications for existing sources. Permits are issued to allow sources to emit limited and specified amounts of pollution as...

85

4th Generation ECR Ion Sources  

E-Print Network [OSTI]

4th Generation ECR Ion Sources Claude M Lyneis, D. Leitner,to developing a 4 th generation ECR ion source with an RFover current 3 rd generation ECR ion sources, which operate

Lyneis, Claude M.

2010-01-01T23:59:59.000Z

86

Alternative Energy Sources - An Interdisciplinary Module for...  

Broader source: Energy.gov (indexed) [DOE]

Alternative Energy Sources - An Interdisciplinary Module for Energy Education Alternative Energy Sources - An Interdisciplinary Module for Energy Education Below is information...

87

Mercury Effects, Sources and Control Measures  

E-Print Network [OSTI]

Mercury Effects, Sources and Control Measures Prepared by Alan B. Jones, Brooks Rand, Ltd., Seattle ................................................................................................................................1 MERCURY SOURCES....................................................................................................................................................................................8 Mercury dumping from naval vessels

88

RECENT PROGRESS IN HEAVY ION SOURCES  

E-Print Network [OSTI]

of hydrogen into thermonuclear fusion reactors. A summary ofFusion Plasma Sources Other sources of high charge state ions include the dense plasma in magnetic confinement thermonuclear

Clark, D.J.

2010-01-01T23:59:59.000Z

89

Lesson 2: Energy Sources Overview  

E-Print Network [OSTI]

Earth's internal heat; ­solar energy from the Sun; ­gravitaDonal energy · There are three sources of external energy: ­ solar energy: radiant energy from and some is converted to tsunami #12;Overview · Solar Energy: ­ Of the three

Chen, Po

90

Known and unknown SCUBA sources  

E-Print Network [OSTI]

Summary and discussion of some projects to use SCUBA to target sources selected at other wavebands, as well as to find new sub-mm galaxies in `blank fields': FIRBACK galaxies; Lyman break galaxies and `the Blob'; HDF flanking fields and the Groth Strip; survey of lensing cluster fields.

Douglas Scott; Colin Borys; Mark Halpern; Anna Sajina; Scott Chapman; Greg Fahlman

2000-10-25T23:59:59.000Z

91

Focused X-ray source  

DOE Patents [OSTI]

Disclosed is an intense, relatively inexpensive X-ray source (as compared to a synchrotron emitter) for technological, scientific, and spectroscopic purposes. A conical radiation pattern produced by a single foil or stack of foils is focused by optics to increase the intensity of the radiation at a distance from the conical radiator. 8 figs.

Piestrup, M.A.; Boyers, D.G.; Pincus, C.I.; Maccagno, P.

1990-08-21T23:59:59.000Z

92

Reporting of Radioactive Sealed Sources  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

To establish U.S. Department of Energy requirements for inventory reporting, transaction reporting, verification of reporting, and assign responsibilities for reporting of radioactive sealed sources. DOE N 251.86 extends this notice until 5-6-11. No cancellations. Canceled by DOE O 231.1B

2008-02-27T23:59:59.000Z

93

EAT SMART Sources: Heart Health  

E-Print Network [OSTI]

-1- EAT SMART Sources: Heart Health American Dietetic Association Complete Food and Nutrition Guide and Promotion; Home and Garden Bulletin Number 252; August 1992. Heart Attach Signs, U.S. Department of Health and Human Services: National Institutes of Heart, Lung, and Blood Institute, NIH Publication No. 01

94

National Synchrotron Light Source II  

ScienceCinema (OSTI)

The National Synchrotron Light Source II (NSLS-II) at the U.S. Department of Energy's Brookhaven National Laboratory is a proposed new state-of-the-art medium energy storage ring designed to deliver world-leading brightness and flux with top-off operation

Steve Dierker

2010-01-08T23:59:59.000Z

95

6, 61256181, 2006 Sources and  

E-Print Network [OSTI]

and transport mechanisms of the pollutants accurately. Mexico City has a large urban fleet in a topographically of the emission inventory, verification of transport processes in air quality models and guidance for policy for the Mexico City Metropolitan Area 6126 #12;ACPD 6, 6125­6181, 2006 Sources and transport of CO and SO2

Boyer, Edmond

96

MIT inverse Compton source concept  

E-Print Network [OSTI]

A compact X-ray source based on inverse Compton scattering of a high-power laser on a high-brightness linac beam is described. The facility can operate in two modes: at high (MHz) repetition rate with flux and brilliance ...

Graves, William S.

97

Climate Change Major information sources  

E-Print Network [OSTI]

://www.ipcc.ch/ Vital Climate Graphics, at http://www.grida.no/climate/vital/ Climate Change Impacts on US, at http://www.gcrio.org/NationalAssessment/ Greenhouse Warming Prediction #12;Energy Predictions 2 Sources: Energy Information Administration (EIA); International Energy Agency (IEA) 2% growth per year, or doubling in 35 years (shortcut: 70/%=doubling) Fossil

98

Miniaturized cathodic arc plasma source  

DOE Patents [OSTI]

A cathodic arc plasma source has an anode formed of a plurality of spaced baffles which extend beyond the active cathode surface of the cathode. With the open baffle structure of the anode, most macroparticles pass through the gaps between the baffles and reflect off the baffles out of the plasma stream that enters a filter. Thus the anode not only has an electrical function but serves as a prefilter. The cathode has a small diameter, e.g. a rod of about 1/4 inch (6.25 mm) diameter. Thus the plasma source output is well localized, even with cathode spot movement which is limited in area, so that it effectively couples into a miniaturized filter. With a small area cathode, the material eroded from the cathode needs to be replaced to maintain plasma production. Therefore, the source includes a cathode advancement or feed mechanism coupled to cathode rod. The cathode also requires a cooling mechanism. The movable cathode rod is housed in a cooled metal shield or tube which serves as both a current conductor, thus reducing ohmic heat produced in the cathode, and as the heat sink for heat generated at or near the cathode. Cooling of the cathode housing tube is done by contact with coolant at a place remote from the active cathode surface. The source is operated in pulsed mode at relatively high currents, about 1 kA. The high arc current can also be used to operate the magnetic filter. A cathodic arc plasma deposition system using this source can be used for the deposition of ultrathin amorphous hard carbon (a-C) films for the magnetic storage industry.

Anders, Andre (Albany, CA); MacGill, Robert A. (Richmond, CA)

2003-04-15T23:59:59.000Z

99

National Synchrotron Light Source Activity Report 1998  

SciTech Connect (OSTI)

National Synchrotron Light Source Activity Report for period October 1, 1997 through September 30, 1998

Rothman, Eva

1999-05-01T23:59:59.000Z

100

Best Management Practice #14: Alternate Water Sources  

Broader source: Energy.gov [DOE]

Many federal facilities may have water uses that can be met with non-potable water from alternate water sources. Potentially available alternative water sources for Federal sources include municipal-supplied reclaimed water, treated gray water from on-site sanitary sources, and storm water.

Note: This page contains sample records for the topic "addressee source pm-o" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

National Synchrotron Light Source annual report 1991  

SciTech Connect (OSTI)

This report contains abstracts from research conducted at the national synchrotron light source. (LSP)

Hulbert, S.L.; Lazarz, N.N. (eds.)

1992-04-01T23:59:59.000Z

102

Best Management Practice #14: Alternative Water Sources  

Broader source: Energy.gov [DOE]

Many federal facilities may have water uses that can be met with non-potable water from alternative water sources. Potentially available alternative water sources for Federal sources include municipal-supplied reclaimed water, treated gray water from on-site sanitary sources, and storm water.

103

X-ray lithography source  

DOE Patents [OSTI]

A high-intensity, inexpensive X-ray source for X-ray lithography for the production of integrated circuits is disclosed. Foil stacks are bombarded with a high-energy electron beam of 25 to 250 MeV to produce a flux of soft X-rays of 500 eV to 3 keV. Methods of increasing the total X-ray power and making the cross section of the X-ray beam uniform are described. Methods of obtaining the desired X-ray-beam field size, optimum frequency spectrum and eliminating the neutron flux are all described. A method of obtaining a plurality of station operation is also described which makes the process more efficient and economical. The satisfying of these issues makes transition radiation an excellent moderate-priced X-ray source for lithography. 26 figures.

Piestrup, M.A.; Boyers, D.G.; Pincus, C.

1991-12-31T23:59:59.000Z

104

X-ray lithography source  

DOE Patents [OSTI]

A high-intensity, inexpensive X-ray source for X-ray lithography for the production of integrated circuits. Foil stacks are bombarded with a high-energy electron beam of 25 to 250 MeV to produce a flux of soft X-rays of 500 eV to 3 keV. Methods of increasing the total X-ray power and making the cross section of the X-ray beam uniform are described. Methods of obtaining the desired X-ray-beam field size, optimum frequency spectrum and elminating the neutron flux are all described. A method of obtaining a plurality of station operation is also described which makes the process more efficient and economical. The satisfying of these issues makes transition radiation an exellent moderate-priced X-ray source for lithography.

Piestrup, Melvin A. (Woodside, CA); Boyers, David G. (Mountain View, CA); Pincus, Cary (Sunnyvale, CA)

1991-01-01T23:59:59.000Z

105

Far-infrared Point Sources  

E-Print Network [OSTI]

The analysis of the submm anisotropies that will be mapped by the forthcoming MAP and PLANCK satellites requires careful foreground subtraction before measuring CMB fluctuations. Among these, the foreground due to IR/submm thermal radiation from dusty sources was poorly known until recent observational breakthroughs began unveiling the properties of these objects. We hereafter briefly review the observational evidence for a strong evolution of IR/submm sources with respect to the local universe explored by IRAS. We present the basic principles of a new modeling effort where consistent spectral energy distributions of galaxies are implemented into the paradigm of hierarchical clustering with the fashionable semi-analytic approach. This model provides us with specific predictions in IR/submm wavebands, that seem to reproduce the current status of the observations and help assessing the capabilities of forthcoming instruments to pursue the exploration of the deep universe at IR/submm wavelengths. Finally, the ability of the PLANCK High Frequency Instrument all-sky survey to produce a catalogue of dusty sources at submm wavelengths is briefly described.

B. Guiderdoni

1999-03-08T23:59:59.000Z

106

Compact x-ray source and panel  

DOE Patents [OSTI]

A compact, self-contained x-ray source, and a compact x-ray source panel having a plurality of such x-ray sources arranged in a preferably broad-area pixelized array. Each x-ray source includes an electron source for producing an electron beam, an x-ray conversion target, and a multilayer insulator separating the electron source and the x-ray conversion target from each other. The multi-layer insulator preferably has a cylindrical configuration with a plurality of alternating insulator and conductor layers surrounding an acceleration channel leading from the electron source to the x-ray conversion target. A power source is connected to each x-ray source of the array to produce an accelerating gradient between the electron source and x-ray conversion target in any one or more of the x-ray sources independent of other x-ray sources in the array, so as to accelerate an electron beam towards the x-ray conversion target. The multilayer insulator enables relatively short separation distances between the electron source and the x-ray conversion target so that a thin panel is possible for compactness. This is due to the ability of the plurality of alternating insulator and conductor layers of the multilayer insulators to resist surface flashover when sufficiently high acceleration energies necessary for x-ray generation are supplied by the power source to the x-ray sources.

Sampayon, Stephen E. (Manteca, CA)

2008-02-12T23:59:59.000Z

107

Detecting fission from special nuclear material sources  

DOE Patents [OSTI]

A neutron detector system for discriminating fissile material from non-fissile material wherein a digital data acquisition unit collects data at high rate, and in real-time processes large volumes of data directly into information that a first responder can use to discriminate materials. The system comprises counting neutrons from the unknown source and detecting excess grouped neutrons to identify fission in the unknown source. The system includes a graphing component that displays the plot of the neutron distribution from the unknown source over a Poisson distribution and a plot of neutrons due to background or environmental sources. The system further includes a known neutron source placed in proximity to the unknown source to actively interrogate the unknown source in order to accentuate differences in neutron emission from the unknown source from Poisson distributions and/or environmental sources.

Rowland, Mark S. (Alamo, CA); Snyderman, Neal J. (Berkeley, CA)

2012-06-05T23:59:59.000Z

108

Multigamma-ray calibration sources  

SciTech Connect (OSTI)

We have calibrated a self-consistent set of multigamma-ray standards using the automated multi-spectrometry ..gamma..-ray counting facility at LLNL's Nuclear Chemistry Division. Pure sources of long-lived activity were produced by mass separation and/or chemical purification. The sources were counted individually and in combination on several different calibrated spectrometer systems. These systems utilize various detectors ranging from small (x-ray) detectors to large volume high-purity Ge detectors. This has allowed the use of the most ideal individual detector-efficiency characteristics for the determination of the relative ..gamma..-ray intensities. Precise energy measurements, reported earlier (Meyer, 1976) have been performed by an independent method. Both the energy and ..gamma..-ray-emission probabilities determined compare well with independently established values such as the recent ICRM intercomparison of /sup 152/Eu. We discuss our investigations aimed at resolving the shape of the efficiency response function up to 10 MeV for large volume Ge(Li) and high-purity Ge detectors. Recent results on the ..gamma..-ray-emission probabilities per decay for /sup 149/Gd and /sup 168/Tm multigamma-ray sources are discussed. For /sup 168/Tm, we deduce a 0.01% ..beta../sup -/ branch to the 87.73-keV level in /sup 168/Yb rather than the previous value which was a factor of 200 greater. In addition, we describe current cooperative efforts aimed at establishing a consistent set of data for short-lived fission products. Included are recent measurements on the bromine fission products with ..gamma.. rays up to 7 MeV.

Meyer, R.A.; Massey, T.N.

1983-05-01T23:59:59.000Z

109

CHINA SPALLATION NEUTRON SOURCE DESIGN.  

SciTech Connect (OSTI)

The China Spallation Neutron Source (CSNS) is an accelerator-based high-power project currently in preparation under the direction of the Chinese Academy of Sciences (CAS). The complex is based on an H- linear accelerator, a rapid cycling proton synchrotron accelerating the beam to 1.6 GeV, a solid tungsten target station, and five initial instruments for spallation neutron applications. The facility will operate at 25 Hz repetition rate with a phase-I beam power of about 120 kW. The major challenge is to build a robust and reliable user's facility with upgrade potential at a fractional of ''world standard'' cost.

WEI,J.

2007-01-29T23:59:59.000Z

110

Gamma source for active interrogation  

DOE Patents [OSTI]

A cylindrical gamma generator includes a coaxial RF-driven plasma ion source and target. A hydrogen plasma is produced by RF excitation in a cylindrical plasma ion generator using an RF antenna. A cylindrical gamma generating target is coaxial with the ion generator, separated by plasma and extraction electrodes which has many openings. The plasma generator emanates ions radially over 360.degree. and the cylindrical target is thus irradiated by ions over its entire circumference. The plasma generator and target may be as long as desired.

Leung, Ka-Ngo; Lou, Tak Pui; Barletta, William A.

2012-10-02T23:59:59.000Z

111

Relating to monitoring ion sources  

DOE Patents [OSTI]

The apparatus and method provide techniques for monitoring the position on alpha contamination in or on items or locations. The technique is particularly applicable to pipes, conduits and other locations to which access is difficult. The technique uses indirect monitoring of alpha emissions by detecting ions generated by the alpha emissions. The medium containing the ions is moved in a controlled manner frog in proximity with the item or location to the detecting unit and the signals achieved over time are used to generate alpha source position information.

Orr, Christopher Henry (Calderbridge, GB); Luff, Craig Janson (Calderbridge, GB); Dockray, Thomas (Calderbridge, GB); Macarthur, Duncan Whittemore (Los Alamos, NM); Bounds, John Alan (Los Alamos, NM)

2002-01-01T23:59:59.000Z

112

Ion Sources - 88-Inch Cyclotron  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary)morphinanInformation Desert Southwest Region service area.PortaldefaultIntroducing AuroraInvestorPagesSources

113

Repatriation of US sources from Brazil  

SciTech Connect (OSTI)

IAEA's interest in excess and unwanted sealed sources extends back to when radium sources were a problem throughout the world. Sta11ing in 1994, world wide IAEA member states inventoried and consolidated radium (Ra)-226 sources. IAEA then trained Regional Teams in the conditioning of Ra-226 sealed sources for long term storage, which resulted in the Regional Teams conditioning about 14,000 radium sources. These sources remained in their respective IAEA member state locations. Regional teams were seen as a way to encourage member state (local) management of a world wide problem, as well as a more cost effective solution.

Tompkins, Andrew J [Los Alamos National Laboratory

2008-01-01T23:59:59.000Z

114

Fluid jet electric discharge source  

DOE Patents [OSTI]

A fluid jet or filament source and a pair of coaxial high voltage electrodes, in combination, comprise an electrical discharge system to produce radiation and, in particular, EUV radiation. The fluid jet source is composed of at least two serially connected reservoirs, a first reservoir into which a fluid, that can be either a liquid or a gas, can be fed at some pressure higher than atmospheric and a second reservoir maintained at a lower pressure than the first. The fluid is allowed to expand through an aperture into a high vacuum region between a pair of coaxial electrodes. This second expansion produces a narrow well-directed fluid jet whose size is dependent on the size and configuration of the apertures and the pressure used in the reservoir. At some time during the flow of the fluid filament, a high voltage pulse is applied to the electrodes to excite the fluid to form a plasma which provides the desired radiation; the wavelength of the radiation being determined by the composition of the fluid.

Bender, Howard A. (Ripon, CA)

2006-04-25T23:59:59.000Z

115

SourceRank: Relevance and Trust Assessment for Deep Web Sources Based on Inter-Source Agreement  

E-Print Network [OSTI]

SourceRank: Relevance and Trust Assessment for Deep Web Sources Based on Inter-Source Agreement Tempe AZ USA 85287 rajub@asu.edu, rao@asu.edu ABSTRACT One immediate challenge in searching the deep web-similarity-based relevance assess- ment. When applied to the deep web these methods have two deficiencies. First

Kambhampati, Subbarao

116

SourceRank: Relevance and Trust Assessment for Deep Web Sources Based on Inter-Source Agreement  

E-Print Network [OSTI]

SourceRank: Relevance and Trust Assessment for Deep Web Sources Based on Inter-Source Agreement. Existing methods have two deficiencies for applying to the open col- lections like the deep web. First query in the deep web, the agreements between theses an- swer sets are likely to be helpful in assessing

Kambhampati, Subbarao

117

Problems with packaged sources in foreign countries  

SciTech Connect (OSTI)

The Global Threat Reduction Initiative's (GTRI) Off-Site Source Recovery Project (OSRP), which is administered by the Los Alamos National Laboratory (LANL), removes excess, unwanted, abandoned, or orphan radioactive sealed sources that pose a potential threat to national security, public health, and safety. In total, GTRI/OSRP has been able to recover more than 25,000 excess and unwanted sealed sources from over 825 sites. In addition to transuranic sources, the GTRI/OSRP mission now includes recovery of beta/gamma emitting sources, which are of concern to both the U.S. government and the International Atomic Energy Agency (IAEA). This paper provides a synopsis of cooperative efforts in foreign countries to remove excess and unwanted sealed sources by discussing three topical areas: (1) The Regional Partnership with the International Atomic Energy Agency; (2) Challenges in repatriating sealed sources; and (3) Options for repatriating sealed sources.

Abeyta, Cristy L [Los Alamos National Laboratory; Matzke, James L [Los Alamos National Laboratory; Zarling, John [Los Alamos National Laboratory; Tompkin, J. Andrew [Los Alamos National Laboratory

2010-01-01T23:59:59.000Z

118

Dairy Biomass as a Renewable Fuel Source  

E-Print Network [OSTI]

biomass. This publication explains the properties of dairy manure that could make it an excellent source of fuel....

Mukhtar, Saqib; Goodrich, Barry; Engler, Cady; Capareda, Sergio

2008-03-19T23:59:59.000Z

119

The Political Economy of Open Source Software  

E-Print Network [OSTI]

Accidental Revolutionary. Sebastopol: O'Reilly Publishing,Open Source Revolution. Sebastopol: O'Reilly, 1999. p. 54).

Weber, Steven

2000-01-01T23:59:59.000Z

120

North Village Ground Source Heat Pumps  

Broader source: Energy.gov [DOE]

Overview: Installation of Ground Source Heat Pumps. Replacement of Aging Heat Pumps. Alignment with Furmanźs Sustainability Goals.

Note: This page contains sample records for the topic "addressee source pm-o" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Josephson device with a matched rf source  

SciTech Connect (OSTI)

Analog simulation of a resistance-shunted ac Josephson junction coupled to an rf source with matching impedance reveals (1) added structure in the device's V-I curve even when the source is quiescent and (2) rf-induced steps with peak amplitudes between those produced by voltage and current rf sources. Both results are consistent with experimental data.

Longacre, A. Jr.

1980-03-01T23:59:59.000Z

122

Memorandum, Reporting of Radiological Sealed Sources Transactions  

Broader source: Energy.gov [DOE]

The requirements for reporting transactions involving radiological sealed sources are identified in Department of Energy (DOE) Notice (N) 234.1, Reporting of Radioactive Sealed Sources. The data reported in accordance with DOE N 234.1 are maintained in the DOE Radiological Source Registry and Tracking (RSRT) database by the Office of Information Management, within the Office of Environment, Health, Safety and Security.

123

Spallation Neutron Sources Around the World  

E-Print Network [OSTI]

Spallation Neutron Sources Around the World Bernie Riemer Thanks to others for the many shamelessly Laboratory #12;2 Managed by UT-Battelle for the U.S. Department of Energy Spallation Neutron Source Facilities Spallation Neutron Source Facilities Serve Neutron Science Programs · Neutron beams to suites

McDonald, Kirk

124

Assistant Deputy Executive Officer Mobile Source Division  

E-Print Network [OSTI]

sources, including all refineries and power plants Top NOx Emissions Sources in 2023 #12;Locomotive Light Duty Trucks/SUVs NOx(tons/day) * Oceangoing vessels = 32tons/day **RECLAIM: 320 largest stationary - Manufacturers may elect to meet a combined NOx+HC standard of 1.4 g/bhp-hr. Source: http://www.dieselnet.com/standards/us

California at Davis, University of

125

Conventional power sources for colliders  

SciTech Connect (OSTI)

At SLAC we are developing high peak-power klystrons to explore the limits of use of conventional power sources in future linear colliders. In an experimental tube we have achieved 150 MW at 1 ..mu..sec pulse width at 2856 MHz. In production tubes for SLAC Linear Collider (SLC) we routinely achieve 67 MW at 3.5 ..mu..sec pulse width and 180 pps. Over 200 of the klystrons are in routine operation in SLC. An experimental klystron at 8.568 GHz is presently under construction with a design objective of 30 MW at 1 ..mu..sec. A program is starting on the relativistic klystron whose performance will be analyzed in the exploration of the limits of klystrons at very short pulse widths.

Allen, M.A.

1987-07-01T23:59:59.000Z

126

Solenoid and monocusp ion source  

DOE Patents [OSTI]

An ion source which generates hydrogen ions having high atomic purity incorporates a solenoidal permanent magnets to increase the electron path length. In a sealed envelope, electrons emitted from a cathode traverse the magnetic field lines of a solenoid and a monocusp magnet between the cathode and a reflector at the monocusp. As electrons collide with gas, the molecular gas forms a plasma. An anode grazes the outer boundary of the plasma. Molecular ions and high energy electrons remain substantially on the cathode side of the cusp, but as the ions and electrons are scattered to the aperture side of the cusp, additional collisions create atomic ions. The increased electron path length allows for smaller diameters and lower operating pressures. 6 figs.

Brainard, J.P.; Burns, E.J.T.; Draper, C.H.

1997-10-07T23:59:59.000Z

127

Ion source based on the cathodic arc  

DOE Patents [OSTI]

A cylindrically symmetric arc source to produce a ring of ions which leave the surface of the arc target radially and are reflected by electrostatic fields present in the source to a point of use, such as a part to be coated, is described. An array of electrically isolated rings positioned in the source serves the dual purpose of minimizing bouncing of macroparticles and providing electrical insulation to maximize the electric field gradients within the source. The source also includes a series of baffles which function as a filtering or trapping mechanism for any macroparticles. 3 figures.

Sanders, D.M.; Falabella, S.

1994-02-01T23:59:59.000Z

128

Source depth for solar p-modes  

E-Print Network [OSTI]

Theoretically calculated power spectra are compares with observed solar p-mode velocity power spectra over a range of mode degree and frequency. The depth for the sources responsible for exciting p-modes of frequency 2.0 mHz is determined from the asymmetry of their power spectra and found to be about 800 km below the photosphere for quadrupole sources and 150 km if sources are dipole. The source depth for high frequency oscillations of frequency greater than about 6 mHz is 180 (50) km for quadrupole (dipole) sources.

Pawan Kumar; Sarbani Basu

2000-06-15T23:59:59.000Z

129

International workshop on cold neutron sources  

SciTech Connect (OSTI)

The first meeting devoted to cold neutron sources was held at the Los Alamos National Laboratory on March 5--8, 1990. Cosponsored by Los Alamos and Oak Ridge National Laboratories, the meeting was organized as an International Workshop on Cold Neutron Sources and brought together experts in the field of cold-neutron-source design for reactors and spallation sources. Eighty-four people from seven countries attended. Because the meeting was the first of its kind in over forty years, much time was spent acquainting participants with past and planned activities at reactor and spallation facilities worldwide. As a result, the meeting had more of a conference flavor than one of a workshop. The general topics covered at the workshop included: Criteria for cold source design; neutronic predictions and performance; energy deposition and removal; engineering design, fabrication, and operation; material properties; radiation damage; instrumentation; safety; existing cold sources; and future cold sources.

Russell, G.J.; West, C.D. (comps.) (Los Alamos National Lab., NM (United States)) [comps.; Los Alamos National Lab., NM (United States)

1991-08-01T23:59:59.000Z

130

Source-to-Source Architecture Transformation for Performance Optimization in BIP  

E-Print Network [OSTI]

Source-to-Source Architecture Transformation for Performance Optimization in BIP Marius Bozga of composition operators: inter- actions and priorities. In this paper we present a method that transforms of the interconnection of components [14]. Source-to-source transformations have been considered as a powerful means

Paris-Sud XI, Universitť de

131

Blind source separation in the presence of weak sources J.-P. Nadala  

E-Print Network [OSTI]

Blind source separation in the presence of weak sources J.-P. Nadala , E. Korutchevab,*, F. Airesa" as compared to the other ones, the "weak" sources. We find that it is preferable to perform blind source simulations. 2000 Elsevier Science Ltd. All rights reserved. Keywords: Independent component analysis; Blind

Aires, Filipe

132

Blind Source Separation 2 Understanding Two Simultaneous Speeches by Blind Source Separation  

E-Print Network [OSTI]

Blind Source Separation 2 Understanding Two Simultaneous Speeches by Blind Source Separation) to segregate speech streams from a mixture of sounds, while the other ex- ploits Blind Source Separation the performance of Blind Source Separation by using the same three benchmarks of 500 mix- ture of two speeches

Ikeda, Shiro

133

Spent Sealed Sources Management in Switzerland - 12011  

SciTech Connect (OSTI)

Information is provided about the international recommendations for the safe management of disused and spent sealed radioactive sources wherein the return to the supplier or manufacturer is encouraged for large radioactive sources. The legal situation in Switzerland is described mentioning the demand of minimization of radioactive waste as well as the situation with respect to the interim storage facility at the Paul Scherrer Institute (PSI). Based on this information and on the market situation with a shortage of some medical radionuclides the management of spent sealed sources is provided. The sources are sorted according to their activity in relation to the nuclide-specific A2-value and either recycled as in the case of high active sources or conditioned as in the case for sources with lower activity. The results are presented as comparison between recycled and conditioned activity for three selected nuclides, i.e. Cs-137, Co-60 and Am-241. (author)

Beer, H.F. [Paul Scherrer Institute, CH-5232 Villigen (Switzerland)

2012-07-01T23:59:59.000Z

134

HTGR Mechanistic Source Terms White Paper  

SciTech Connect (OSTI)

The primary purposes of this white paper are: (1) to describe the proposed approach for developing event specific mechanistic source terms for HTGR design and licensing, (2) to describe the technology development programs required to validate the design methods used to predict these mechanistic source terms and (3) to obtain agreement from the NRC that, subject to appropriate validation through the technology development program, the approach for developing event specific mechanistic source terms is acceptable

Wayne Moe

2010-07-01T23:59:59.000Z

135

Carbothermic reduction with parallel heat sources  

DOE Patents [OSTI]

Disclosed are apparatus and method of carbothermic direct reduction for producing an aluminum alloy from a raw material mix including aluminum oxide, silicon oxide, and carbon wherein parallel heat sources are provided by a combustion heat source and by an electrical heat source at essentially the same position in the reactor, e.g., such as at the same horizontal level in the path of a gravity-fed moving bed in a vertical reactor. The present invention includes providing at least 79% of the heat energy required in the process by the electrical heat source.

Troup, Robert L. (Murrysville, PA); Stevenson, David T. (Washington Township, Washington County, PA)

1984-12-04T23:59:59.000Z

136

DOE & Strategic Sourcing "New Challenges, New Opportunities"  

Broader source: Energy.gov (indexed) [DOE]

& Strategic Sourcing "New Challenges, New Opportunities" What is it? NNSA Model DOE Future Activities Bill Marks, Commodity Manager, NNSA Supply Chain Management Center Gary...

137

Sources: Energy Information Administration, Form EIA-182,  

U.S. Energy Information Administration (EIA) Indexed Site

Sources: Energy Information Administration, Form EIA-182, "Domestic Crude Oil First Purchase Report"; Form EIA-856, "Monthly Foreign Crude Oil Acquisition Report"; and Form EIA-14,...

138

Building the World's Most Advanced Light Source  

SciTech Connect (OSTI)

View this time-lapse video showing construction of the National Synchrotron Light Source II at Brookhaven National Laboratory. Construction is shown from 2009-2012.

None

2012-08-03T23:59:59.000Z

139

Radiation Sources and Radioactive Materials (Connecticut)  

Broader source: Energy.gov [DOE]

These regulations apply to persons who receive, transfer, possess, manufacture, use, store, handle, transport or dispose of radioactive materials and/or sources of ionizing radiation. Some...

140

Engineered Quantum Dot Single Photon Sources  

E-Print Network [OSTI]

Fast, high efficiency, and low error single photon sources are required for implementation of a number of quantum information processing applications. The fastest triggered single photon sources to date have been demonstrated using epitaxially grown semiconductor quantum dots (QDs), which can be conveniently integrated with optical microcavities. Recent advances in QD technology, including demonstrations of high temperature and telecommunications wavelength single photon emission, have made QD single photon sources more practical. Here we discuss the applications of single photon sources and their various requirements, before reviewing the progress made on a quantum dot platform in meeting these requirements.

Sonia Buckley; Kelley Rivoire; Jelena Vuckovic

2012-10-03T23:59:59.000Z

Note: This page contains sample records for the topic "addressee source pm-o" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Photon Statistics of Semiconductor Light Sources.  

E-Print Network [OSTI]

??In recent years, semiconductor light sources have become more and more interesting in terms of applications due to their high efficiency and low cost. AdvancedÖ (more)

AŖmann, Marc

2010-01-01T23:59:59.000Z

142

Simulation of radiant cooling performance with evaporative cooling sources  

E-Print Network [OSTI]

energy sources of cooling supply water and an aggressiveas the primary source of cooling supply water. The analysisthermal mass to the cooling supply water source, nighttime

Moore, Timothy

2008-01-01T23:59:59.000Z

143

Power conditioning system for energy sources  

DOE Patents [OSTI]

Apparatus for conditioning power generated by an energy source includes an inverter for converting a DC input voltage from the energy source to a square wave AC output voltage, and a converter for converting the AC output voltage from the inverter to a sine wave AC output voltage.

Mazumder, Sudip K. (Chicago, IL); Burra, Rajni K. (Chicago, IL); Acharya, Kaustuva (Chicago, IL)

2008-05-13T23:59:59.000Z

144

Negative hydrogen ion sources for accelerators  

SciTech Connect (OSTI)

A variety of H{sup -} ion sources are in use at accelerator laboratories around the world. A list of these ion sources includes surface plasma sources with magnetron, Penning and surface converter geometries as well as magnetic-multipole volume sources with and without cesium. Just as varied is the means of igniting and maintaining magnetically confined plasmas. Hot and cold cathodes, radio frequency, and microwave power are all in use, as well as electron tandem source ignition. The extraction systems of accelerator H{sup -} ion sources are highly specialized utilizing magnetic and electric fields in their low energy beam transport systems to produce direct current, as well as pulsed and/or chopped beams with a variety of time structures. Within this paper, specific ion sources utilized at accelerator laboratories shall be reviewed along with the physics of surface and volume H{sup -} production in regard to source emittance. Current research trends including aperture modeling, thermal modeling, surface conditioning, and laser diagnostics will also be discussed.

Moehs, D.P.; /Fermilab; Peters, J.; /DESY; Sherman, J.; /Los Alamos

2005-08-01T23:59:59.000Z

145

Beam current controller for laser ion source  

DOE Patents [OSTI]

The present invention relates to the design and use of an ion source with a rapid beam current controller for experimental and medicinal purposes. More particularly, the present invention relates to the design and use of a laser ion source with a magnetic field applied to confine a plasma flux caused by laser ablation.

Okamura, Masahiro

2014-10-28T23:59:59.000Z

146

NEWS & VIEWS Radiation SouRCES  

E-Print Network [OSTI]

NEWS & VIEWS Radiation SouRCES Electrons and lasers sing THz tune gwyn P. Williams is in the Free Bielawski and colleagues describe the ability to coherently control the radiative behaviour of the electrons a bright, tunable source of radiation in the difficult-to-reach terahertz region of the electromagnetic

Loss, Daniel

147

Business Partnering with Open Source Communities  

E-Print Network [OSTI]

Business Partnering with Open Source Communities: Opportunities, Perils and Pitfalls James Howison Syracuse University #12;James Howison: Open Source and Business Partnering Introductions ·Doctoral student researching FLOSS ·Online but also ApacheCon, O'Reilly OSCon, ODSC ·Developer on BibDesk, (small OS X

Crowston, Kevin

148

Multi-Sourced Electricity for Electrolytic Hydrogen  

E-Print Network [OSTI]

$/tonne (the DOE's centralized plant #12;Page 8 Electrolytic Hydrogen · Focus on low-cost electrolysis - 300 US Americas DOE Hydrogen Electrolysis-Utility Integration Workshop Boulder, Colorado 2004 September 22 & 23Multi-Sourced Electricity for Electrolytic Hydrogen Multi-Sourced Electricity for Electrolytic

149

Portable thermo-photovoltaic power source  

DOE Patents [OSTI]

A miniature thermo-photovoltaic (TPV) device for generation of electrical power for use in portable electronic devices. A TPV power source is constructed to provide a heat source chemical reactor capable of using various fuels, such as liquid hydrocarbons, including but not limited to propane, LPG, butane, alcohols, oils and diesel fuels to generate a source of photons. A reflector dish guides misdirected photon energy from the photon source toward a photovoltaic array. A thin transparent protector sheet is disposed between the photon source and the array to reflect back thermal energy that cannot be converted to electricity, and protect the array from thermal damage. A microlens disposed between the protector sheet and the array further focuses the tailored band of photon energy from the photon source onto an array of photovoltaic cells, whereby the photon energy is converted to electrical power. A heat recuperator removes thermal energy from reactor chamber exhaust gases, preferably using mini- or micro-bellows to force air and fuel past the exhaust gases, and uses the energy to preheat the fuel and oxidant before it reaches the reactor, increasing system efficiency. Mini- or micro-bellows force ambient air through the system both to supply oxidant and to provide cooling. Finally, an insulator, which is preferably a super insulator, is disposed around the TPV power source to reduce fuel consumption, and to keep the TPV power source cool to the touch so it can be used in hand-held devices.

Zuppero, Anthony C. (Idaho Falls, ID); Krawetz, Barton (Idaho Falls, ID); Barklund, C. Rodger (Idaho Falls, ID); Seifert, Gary D. (Idaho Falls, ID)

1997-01-14T23:59:59.000Z

150

Management of disused plutonium sealed sources  

SciTech Connect (OSTI)

The Global Threat Reduction Initiative's (GTRI) Offsite Source Recovery Project (OSRP) has been recovering excess and unwanted radioactive sealed sources since 1999, including more than 2,400 Plutonium (Pu)-238 sealed sources and 653 Pu-239-bearing sources that represent more than 10% of the total sources recovered by GTRI/OSRP to date. These sources have been recovered from hundreds of sites within the United States (US) and around the world. OSRP grew out of early efforts at the Los Alamos National Laboratory (LANL) to recover and disposition excess Plutonium-239 (Pu-239) sealed sources that were distributed in the 1960s and 1970s under the Atoms for Peace Program, a loan-lease program that serviced 31 countries, as well as domestic users. In the conduct of these recovery operations, GTRI/OSRP has been required to solve problems related to knowledge-of-inventory, packaging and transportation of fissile and heat-source materials, transfer of ownership, storage of special nuclear material (SNM) both at US Department of Energy (DOE) facilities and commercially, and disposal. Unique issues associated with repatriation from foreign countries, including end user agreements required by some European countries and denials of shipment, will also be discussed.

Whitworth, Julia Rose [Los Alamos National Laboratory; Pearson, Michael W [Los Alamos National Laboratory; Abeyta, Cristy [Los Alamos National Laboratory

2010-01-01T23:59:59.000Z

151

SHIELDING ANALYSIS FOR PORTABLE GAUGING COMBINATION SOURCES  

SciTech Connect (OSTI)

Radioisotopic decay has been used as a source of photons and neutrons for industrial gauging operations since the late 1950s. Early portable moisture/density gauging equipment used Americium (Am)-241/Beryllium (Be)/Cesium (Cs)-137 combination sources to supply the required nuclear energy for gauging. Combination sources typically contained 0.040 Ci of Am-241 and 0.010 Ci of CS-137 in the same source capsule. Most of these sources were manufactured approximately 30 years ago. Collection, transportation, and storage of these sources once removed from their original device represent a shielding problem with distinct gamma and neutron components. The Off-Site Source Recovery (OSR) Project is planning to use a multi-function drum (MFD) for the collection, shipping, and storage of AmBe sources, as well as the eventual waste package for disposal. The MFD is an approved TRU waste container design for DOE TRU waste known as the 12 inch Pipe Component Overpack. As the name indicates, this drum is based on a 12 inch ID stainless steel weldment approximately 25 inch in internal length. The existing drum design allows for addition of shielding within the pipe component up to the 110 kg maximum pay load weight. The 12 inch pipe component is packaged inside a 55-gallon drum, with the balance of the interior space filled with fiberboard dunnage. This packaging geometry is similar to the design of a DOT 6M, Type B shipping container.

J. TOMPKINS; L. LEONARD; ET AL

2000-08-01T23:59:59.000Z

152

Fermi Large Area Telescope Third Source Catalog  

E-Print Network [OSTI]

We present the third Fermi Large Area Telescope source catalog (3FGL) of sources in the 100~MeV--300~GeV range. Based on the first four years of science data from the Fermi Gamma-ray Space Telescope mission, it is the deepest yet in this energy range. Relative to the 2FGL catalog, the 3FGL catalog incorporates twice as much data as well as a number of analysis improvements, including improved calibrations at the event reconstruction level, an updated model for Galactic diffuse gamma-ray emission, a refined procedure for source detection, and improved methods for associating LAT sources with potential counterparts at other wavelengths. The 3FGL catalog includes 3033 sources above 4 sigma significance, with source location regions, spectral properties, and monthly light curves for each. Of these, 78 are flagged as potentially being due to imperfections in the model for Galactic diffuse emission. Twenty-five sources are modeled explicitly as spatially extended, and overall 232 sources are considered as identifie...

,

2015-01-01T23:59:59.000Z

153

BUILDING 96 RECOMMENDATION FOR SOURCE AREA REMEDIATION  

E-Print Network [OSTI]

OU III BUILDING 96 RECOMMENDATION FOR SOURCE AREA REMEDIATION FINAL Prepared by: Brookhaven FOR U.S. Department of Energy March 2009 #12;i OU III BUILDING 96 RECOMMENDATION FOR SOURCE AREA..................................................................................................................4 4.0 Building 96 ­ Operational Background

154

Comparing and Contrasting Web Services and Open Source  

E-Print Network [OSTI]

Software can either be developed in a way such that the source code is available to others, open source, or such that it is not, closed source. Open source software has a number of architectural advantages over traditionally ...

Katz, Jeremy Lee

2010-01-01T23:59:59.000Z

155

Electrospray ion source with reduced analyte electrochemistry  

DOE Patents [OSTI]

An electrospray ion (ESI) source and method capable of ionizing an analyte molecule without oxidizing or reducing the analyte of interest. The ESI source can include an emitter having a liquid conduit, a working electrode having a liquid contacting surface, a spray tip, a secondary working electrode, and a charge storage coating covering partially or fully the liquid contacting surface of the working electrode. The liquid conduit, the working electrode and the secondary working electrode can be in liquid communication. The electrospray ion source can also include a counter electrode proximate to, but separated from, said spray tip. The electrospray ion source can also include a power system for applying a voltage difference between the working electrodes and a counter-electrode. The power system can deliver pulsed voltage changes to the working electrodes during operation of said electrospray ion source to minimize the surface potential of the charge storage coating.

Kertesz, Vilmos; Van Berkel, Gary J

2013-07-30T23:59:59.000Z

156

Calculation of source terms for NUREG-1150  

SciTech Connect (OSTI)

The source terms estimated for NUREG-1150 are generally based on the Source Term Code Package (STCP), but the actual source term calculations used in computing risk are performed by much smaller codes which are specific to each plant. This was done because the method of estimating the uncertainty in risk for NUREG-1150 requires hundreds of source term calculations for each accident sequence. This is clearly impossible with a large, detailed code like the STCP. The small plant-specific codes are based on simple algorithms and utilize adjustable parameters. The values of the parameters appearing in these codes are derived from the available STCP results. To determine the uncertainty in the estimation of the source terms, these parameters were varied as specified by an expert review group. This method was used to account for the uncertainties in the STCP results and the uncertainties in phenomena not considered by the STCP.

Breeding, R.J.; Williams, D.C.; Murfin, W.B.; Amos, C.N.; Helton, J.C.

1987-10-01T23:59:59.000Z

157

Apparatus for safeguarding a radiological source  

DOE Patents [OSTI]

A tamper detector is provided for safeguarding a radiological source that is moved into and out of a storage location through an access porthole for storage and use. The radiological source is presumed to have an associated shipping container approved by the U.S. Nuclear Regulatory Commission for transporting the radiological source. The tamper detector typically includes a network of sealed tubing that spans at least a portion of the access porthole. There is an opening in the network of sealed tubing that is large enough for passage therethrough of the radiological source and small enough to prevent passage therethrough of the associated shipping cask. Generally a gas source connector is provided for establishing a gas pressure in the network of sealed tubing, and a pressure drop sensor is provided for detecting a drop in the gas pressure below a preset value.

Bzorgi, Fariborz M

2014-10-07T23:59:59.000Z

158

Electrospray ion source with reduced analyte electrochemistry  

DOE Patents [OSTI]

An electrospray ion (ESI) source and method capable of ionizing an analyte molecule without oxidizing or reducing the analyte of interest. The ESI source can include an emitter having a liquid conduit, a working electrode having a liquid contacting surface, a spray tip, a secondary working electrode, and a charge storage coating covering partially or fully the liquid contacting surface of the working electrode. The liquid conduit, the working electrode and the secondary working electrode can be in liquid communication. The electrospray ion source can also include a counter electrode proximate to, but separated from, said spray tip. The electrospray ion source can also include a power system for applying a voltage difference between the working electrodes and a counter-electrode. The power system can deliver pulsed voltage changes to the working electrodes during operation of said electrospray ion source to minimize the surface potential of the charge storage coating.

Kertesz, Vilmos [Knoxville, TN; Van Berkel, Gary [Clinton, TN

2011-08-23T23:59:59.000Z

159

OpenADR Open Source Toolkit: Developing Open Source Software for the Smart Grid  

E-Print Network [OSTI]

Status of NISTís EISA Smart Grid Efforts,Ē Mar. 26, 2009,Open Source Software for the Smart Grid Charles McParlandOpen Source Software for the Smart Grid Charles McParland,

McParland, Charles

2012-01-01T23:59:59.000Z

160

Source storage and transfer cask: Users Guide  

SciTech Connect (OSTI)

The storage and shield cask for the dual californium source is designed to shield and transport up to 3.7 mg (2 Ci) of /sup 252/Cf. the cask meets Department of Transportation (DOT) license requirements for Type A materials (DOT-7A). The cask is designed to transfer sources to and from the Flourinel and Fuel Storage (FAST) facility delayed-neutron interrogator. Californium sources placed in the cask must be encapsulated in the SR-CF-100 package and attached to Teleflex cables. The cask contains two source locations. Each location contains a gear box that allows a Teleflex cable to be remotely moved by a hand crank into and out of the cask. This transfer procedure permits sources to be easily removed and inserted into the delayed-neutron interrogator and reduces personnel radiation exposure during transfer. The radiation dose rate with the maximum allowable quantity of californium (3.7 mg) in the cask is 30 mR/h at the surface and less than 2 mR/h 1 m from the cask surface. This manual contains information about the cask, californium sources, describes the method to ship the cask, and how to insert and remove sources from the cask. 28 figs.

Eccleston, G.W.; Speir, L.G.; Garcia, D.C.

1985-04-01T23:59:59.000Z

Note: This page contains sample records for the topic "addressee source pm-o" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Sources of the Radio Background Considered  

SciTech Connect (OSTI)

We investigate possible origins of the extragalactic radio background reported by the ARCADE 2 collaboration. The surface brightness of the background is several times higher than that which would result from currently observed radio sources. We consider contributions to the background from diffuse synchrotron emission from clusters and the intergalactic medium, previously unrecognized flux from low surface brightness regions of radio sources, and faint point sources below the flux limit of existing surveys. By examining radio source counts available in the literature, we conclude that most of the radio background is produced by radio point sources that dominate at sub {mu}Jy fluxes. We show that a truly diffuse background produced by elections far from galaxies is ruled out because such energetic electrons would overproduce the observed X-ray/{gamma}-ray background through inverse Compton scattering of the other photon fields. Unrecognized flux from low surface brightness regions of extended radio sources, or moderate flux sources missed entirely by radio source count surveys, cannot explain the bulk of the observed background, but may contribute as much as 10%. We consider both radio supernovae and radio quiet quasars as candidate sources for the background, and show that both fail to produce it at the observed level because of insufficient number of objects and total flux, although radio quiet quasars contribute at the level of at least a few percent. We conclude that the most important population for production of the background is likely ordinary starforming galaxies above redshift 1 characterized by an evolving radio far-infrared correlation, which increases toward the radio loud with redshift.

Singal, J.; /KIPAC, Menlo Park /Stanford U.; Stawarz, L.; /KIPAC, Menlo Park /Stanford U. /Jagiellonian U., Astron. Observ.; Lawrence, A.; /Edinburgh U., Inst. Astron. /KIPAC, Menlo Park /Stanford U.; Petrosian, V.; /KIPAC, Menlo Park /Stanford U., Phys. Dept. /Stanford U., Appl. Phys. Dept.

2011-08-22T23:59:59.000Z

162

Directional measurements for sources of fission neutrons  

SciTech Connect (OSTI)

Although penetrating neutron and gamma-ray emissions arguably provide the most effective signals for locating sources of nuclear radiation, their relatively low fluxes make searching for radioactive materials a tedious process. Even assuming lightly shielded sources and detectors with large areas and high efficiencies, estimated counting times can exceed several minutes for source separations greater than ten meters. Because determining the source position requires measurements at several locations, each with its own background, the search procedure can be lengthy and difficult to automate. Although directional measurements can be helpful, conventional collimation reduces count rates and increases the detector size and weight prohibitively, especially for neutron instruments. We describe an alternative approach for locating radiation sources that is based on the concept of a polarized radiation field. In this model, the presence of a source adds a directional component to the randomly oriented background radiation. The net direction of the local field indicates the source angle, and the magnitude provides an estimate of the distance to the source. The search detector is therefore seen as a device that responds to this polarized radiation field. Our proposed instrument simply substitutes segmented detectors for conventional single-element ones, so it requires little or no collimating material or additional weight. Attenuation across the detector creates differences in the count rates for opposite segments, whose ratios can be used to calculate the orthogonal components of the polarization vector. Although this approach is applicable to different types of radiation and detectors, in this report we demonstrate its use for sources of fission neutrons by using a prototype fast-neutron detector, which also provides background-corrected energy spectra for the incident neutrons.

Byrd, R.C.; Auchampaugh, G.F.; Feldman, W.C.

1993-11-01T23:59:59.000Z

163

The M31 population of supersoft sources  

E-Print Network [OSTI]

The 1991 ROSAT PSPC M31 X-ray point source catalog has been screened in order to set up a sample of candidate supersoft sources in this galaxy, additional to the 16 supersoft sources of Supper et al. (1997). 26 candidates have been found. Absorbing hydrogen column densities, effective temperatures and white dwarf masses (assuming the sources are on the stability line of surface nuclear burning) are derived. An observed white dwarf mass distribution is derived which indicates that the masses are constrained to values above 0.90 solar masses. The entire population of supersoft sources in M31 is estimated taking a theoretical white dwarf mass distribution into account, assuming that the observationally derived sample is restricted to white dwarf masses above 0.90 solar, and taking into account that the gas and the source population have a different scale height. A total number of at least 200-500 and at most 6,000-15,000 sources is deduced depending on the used galaxy N_H model, making use of the population synthesis calculation of Yungelson (1996). The spatial distribution favors a disk (or spiral-arm) dominated young stellar population with a ratio of 1/(4-7) of bulge/disk systems. Assuming that all supersoft sources with masses in excess of 0.5 solar masses are progenitors of supernovae of type Ia, a SN Ia rate of (0.8-7) 10^-3 yr^-1 is derived for M31 based on these progenitors. Supersoft sources might account for 20-100% of the total SN Ia rate in a galaxy like M31.

Peter Kahabka

1999-01-12T23:59:59.000Z

164

Romanian ECR ion source project RECRIS  

SciTech Connect (OSTI)

A 14.5 GHz ECR ion source is in an advanced stage of construction at the Institute of Atomic Physics of Bucharest, Romania. This ECR multicharge heavy ion source (RECRIS) is designed to be independently used in atomic physics research as well as an injector into the existing rf heavy ion postaccelerator of the Bucharest FN tandem accelerator. The general design and main characteristics of RECRIS are presented as well as the present status and the schedule of this project. A research program and facility was started in order to study physical ways to improve the ECR ion source performances. {copyright} {ital 1996 American Institute of Physics.}

Dobrescu, S.; Schaechter, L.; Badescu-Singureanu, A.I.; Zoran, V. [Institute of Physics and Nuclear Engineering, P. O. Box MG-6, Bucharest (Romania)] [Institute of Physics and Nuclear Engineering, P. O. Box MG-6, Bucharest (Romania)

1996-03-01T23:59:59.000Z

165

Spallation Neutron Source reaches megawatt power  

ScienceCinema (OSTI)

The Department of Energy's Spallation Neutron Source (SNS), already the world's most powerful facility for pulsed neutron scattering science, is now the first pulsed spallation neutron source to break the one-megawatt barrier. "Advances in the materials sciences are fundamental to the development of clean and sustainable energy technologies. In reaching this milestone of operating power, the Spallation Neutron Source is providing scientists with an unmatched resource for unlocking the secrets of materials at the molecular level," said Dr. William F. Brinkman, Director of DOE's Office of Science.

Dr. William F. Brinkman

2010-01-08T23:59:59.000Z

166

Mechanistic facility safety and source term analysis  

SciTech Connect (OSTI)

A PC-based computer program was created for facility safety and source term analysis at Hanford The program has been successfully applied to mechanistic prediction of source terms from chemical reactions in underground storage tanks, hydrogen combustion in double contained receiver tanks, and proccss evaluation including the potential for runaway reactions in spent nuclear fuel processing. Model features include user-defined facility room, flow path geometry, and heat conductors, user-defined non-ideal vapor and aerosol species, pressure- and density-driven gas flows, aerosol transport and deposition, and structure to accommodate facility-specific source terms. Example applications are presented here.

PLYS, M.G.

1999-06-09T23:59:59.000Z

167

Source Coding with Mismatched Distortion Measures  

E-Print Network [OSTI]

We consider the problem of lossy source coding with a mismatched distortion measure. That is, we investigate what distortion guarantees can be made with respect to distortion measure $\\tilde{\\rho}$, for a source code designed such that it achieves distortion less than $D$ with respect to distortion measure $\\rho$. We find a single-letter characterization of this mismatch distortion and study properties of this quantity. These results give insight into the robustness of lossy source coding with respect to modeling errors in the distortion measure. They also provide guidelines on how to choose a good tractable approximation of an intractable distortion measure.

Niesen, Urs; Wornell, Gregory

2008-01-01T23:59:59.000Z

168

The Identification of EGRET Sources with Flat-Spectrum Radio Sources  

E-Print Network [OSTI]

We present a method to assess the reliability of the identification of EGRET sources with extragalactic radio sources. We verify that EGRET is detecting the blazar class of AGN. However, many published identifications are found to be questionable. We provide a table of 42 blazars which we expect to be robust identifications of EGRET sources. This includes one previously unidentified EGRET source, the lensed AGN PKS 1830-210 near the direction of the Galactic center. We provide the best available positions for 16 more radio sources which are also potential identifications for previously unidentified EGRET sources. All high Galactic latitude EGRET sources (b>3 degrees) which demonstrate significant variability can be identified with flat spectrum radio sources. This suggests that EGRET is not detecting any type of AGN other than blazars. This identification method has been used to establish with 99.998% confidence that the peak gamma-ray flux of a blazar is correlated with its average 5 GHz radio flux. An even better correlation is seen between gamma-ray flux and the 2.29 GHz flux density measured with VLBI at the base of the radio jet. Also, using high confidence identifications, we find that the radio sources identified with EGRET sources have larger correlated VLBI flux densities than the parent population of flat radio spectrum sources.

J. R. Mattox; J. Schachter; L. Molnar; R. C. Hartman; A. R. Patnaik

1996-12-18T23:59:59.000Z

169

Anomaly metrics to differentiate threat sources from benign sources in primary vehicle screening.  

SciTech Connect (OSTI)

Discrimination of benign sources from threat sources at Port of Entries (POE) is of a great importance in efficient screening of cargo and vehicles using Radiation Portal Monitors (RPM). Currently RPM's ability to distinguish these radiological sources is seriously hampered by the energy resolution of the deployed RPMs. As naturally occurring radioactive materials (NORM) are ubiquitous in commerce, false alarms are problematic as they require additional resources in secondary inspection in addition to impacts on commerce. To increase the sensitivity of such detection systems without increasing false alarm rates, alarm metrics need to incorporate the ability to distinguish benign and threat sources. Principal component analysis (PCA) and clustering technique were implemented in the present study. Such techniques were investigated for their potential to lower false alarm rates and/or increase sensitivity to weaker threat sources without loss of specificity. Results of the investigation demonstrated improved sensitivity and specificity in discriminating benign sources from threat sources.

Cohen, Israel Dov; Mengesha, Wondwosen

2011-09-01T23:59:59.000Z

170

Enabling Exponential Innovation via Open Source  

E-Print Network [OSTI]

-technical innovations #12;Power law distribution #12;OSSD Projects as innovation engines Social/technical innovations OSSD projects exhibit sustained exponential growth via social and technical innovations ExponentialEnabling Exponential Innovation via Open Source Software Development Walt Scacchi Institute

Scacchi, Walt

171

Atmospheric sampling glow discharge ionization source  

DOE Patents [OSTI]

An atmospheric sampling glow discharge ionization source that can be used in combination with an analytical instrument which operates at high vacuum, such as a mass spectrometer. The atmospheric sampling glow discharge ionization source comprises a chamber with at least one pair of electrodes disposed therein, an inlet for a gaseous sample to be analyzed and an outlet communicating with an analyzer which operates at subatmospheric pressure. The ionization chamber is maintained at a pressure below atmospheric pressure, and a voltage difference is applied across the electrodes to induce a glow discharge between the electrodes, so that molecules passing through the inlet are ionized by the glow discharge and directed into the analyzer. The ionization source accepts the sample under atmospheric pressure conditions and processes it directly into the high vacuum instrument, bridging the pressure gap and drawing off unwanted atmospheric gases. The invention also includes a method for analyzing a gaseous sample using the glow discharge ionization source described above. 3 figs.

McLuckey, S.A.; Glish, G.L.

1989-07-18T23:59:59.000Z

172

Compact neutron source development at LBNL  

E-Print Network [OSTI]

Castro and Alan Smith from LBNLís Radiation Safety Group inthe LDRD Project of LBNL and the U. S. Department of Energyneutron source development at LBNL Jani Reijonen * , Tak Pui

Reijonen, Jani; Lou, Tak Pui; Tolmachoff, Bryan; Leung, K.N.

2001-01-01T23:59:59.000Z

173

National Synchrotron Light Source annual report 1988  

SciTech Connect (OSTI)

This report discusses the experiment done at the National Synchrotron Light Source. Most experiments discussed involves the use of the x-ray beams to study physical properties of solid materials. (LSP)

Hulbert, S.; Lazarz, N.; Williams, G. (eds.)

1988-01-01T23:59:59.000Z

174

Modelling of Radiative Transfer in Light Sources  

E-Print Network [OSTI]

of equations . . . . . . . . . . . . . . . . . 19 2.4 Transport equations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 3.2 The equation for radiative transfer . . . . . . . . . . . . . . . . . . . . . . . . 44 3Modelling of Radiative Transfer in Light Sources PROEFSCHRIFT ter verkrijging van de graad van

Eindhoven, Technische Universiteit

175

Sample inlet tube for ion source  

DOE Patents [OSTI]

An improved inlet tube is positioned within an aperture through the device to allow the passage of ions from the ion source, through the improved inlet tube, and into the interior of the device. The inlet tube is designed with a larger end and a smaller end wherein the larger end has a larger interior diameter than the interior diameter of the smaller end. The inlet tube is positioned within the aperture such that the larger end is pointed towards the ion source, to receive ions therefrom, and the smaller end is directed towards the interior of the device, to deliver the ions thereto. Preferably, the ion source utilized in the operation of the present invention is a standard electrospray ionization source. Similarly, the present invention finds particular utility in conjunction with analytical devices such as mass spectrometers.

Prior, David [Hermiston, OR; Price, John [Richland, WA; Bruce, Jim [Oceanside, CA

2002-09-24T23:59:59.000Z

176

Advanced Photon Source Upgrade Project - Materials  

ScienceCinema (OSTI)

An upgrade to Advanced Photon Source announced by DOE - http://go.usa.gov/ivZ -- will help scientists break through bottlenecks in materials design in order to develop materials with desirable functions.

Gibbson, Murray;

2013-04-19T23:59:59.000Z

177

Laser ion source with solenoid field  

DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

Pulse length extension of highly charged ion beam generated from a laser ion source is experimentally demonstrated. The laser ion source (LIS) has been recognized as one of the most powerful heavy ion source. However, it was difficult to provide long pulse beams. By applying a solenoid field (90 mT, 1 m) at plasma drifting section, a pulse length of carbon ion beam reached 3.2 ?s which was 4.4 times longer than the width from a conventional LIS. The particle number of carbon ions accelerated by a radio frequency quadrupole linear accelerator was 1.2 ◊ 1011, which was provided by a single 1 J Nd-YAG laser shot. A laser ion source with solenoid field could be used in a next generation heavy ion accelerator.

Kanesue, Takeshi [Brookhaven National Laboratory (BNL), Upton, NY (United States); Fuwa, Yasuhiro [Kyoto Univ., Kyoto (Japan); RIKEN (Japan); Kondo, Kotaro [Tokyo Institute of Technology, Tokyo (Japan); Okamura, Masahiro [Brookhaven National Laboratory (BNL), Upton, NY (United States)

2014-11-10T23:59:59.000Z

178

Advanced Light Source Activity Report 2002  

SciTech Connect (OSTI)

This annual report of the Advanced Light Source details science highlights and facility improvements during the year. It also offers information on events sponsored by the facility, technical specifications, and staff and publication information.

Duque, Theresa; Greiner, Annette; Moxon, Elizabeth; Robinson, Arthur; Tamura, Lori (Editors)

2003-06-12T23:59:59.000Z

179

FINLAND SOURCES 2007 -Forest industry production Authorities  

E-Print Network [OSTI]

FINLAND SOURCES 2007 - Forest industry production Print Home Finland Government Authorities Local administration Federations, organizations Company outlooks Industry ¬Ľ Overview ¬Ľ Forest industry production ¬Ľ Turnover ¬Ľ Profit ¬Ľ Energy Year 2006 ¬Ľ Shipping Business services Infrastructure Economy Education

180

SourceGas- Energy Efficiency Programs (Arkansas)  

Broader source: Energy.gov [DOE]

SourceGas offers its Arkansas residential and commercial customers mail-in rebates to help replace old, out-dated equipment with new energy- and natural gas-saving equipment. Customers must...

Note: This page contains sample records for the topic "addressee source pm-o" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Supersoft Sources as SN Ia Progenitors  

E-Print Network [OSTI]

of the existence of supersoft X­ray sources. It is argued that SNe Ia are thermonuclear explosions of accreting C is that they represent thermonuclear disruptions of mass accreting white dwarfs (WDs). Thus, the basic ingredient

Greiner, Jochen

182

DSpace: An Open Source Dynamic Digital Repository  

E-Print Network [OSTI]

For the past two years the Massachusetts Institute of Technology (MIT) Libraries and Hewlett-Packard Labs have been collaborating on the development of an open source system called DSpace‚?Ę that functions as a repository ...

Smith, MacKenzie

183

The Electron Beam Ion Source (EBIS)  

ScienceCinema (OSTI)

Brookhaven National Lab has successfully developed a new pre-injector system, called the Electron Beam Ion Source, for the Relativistic Heavy Ion Collider (RHIC) and NASA Space Radiation Laboratory science programs. The first of several planned improvemen

Brookhaven Lab

2010-01-08T23:59:59.000Z

184

Advanced Photon Source Upgrade Project - Energy  

ScienceCinema (OSTI)

An upgrade to the Advanced Photon Source (announced by DOE - http://go.usa.gov/ivZ) will help scientists better understand complex environments such as in catalytic reactions.

Gibson, Murray; Chamberlain, Jeff; Young, Linda

2013-04-19T23:59:59.000Z

185

ECR ion source with electron gun  

DOE Patents [OSTI]

An Advanced Electron Cyclotron Resonance ion source having an electron gun for introducing electrons into the plasma chamber of the ion source is described. The ion source has a injection enclosure and a plasma chamber tank. The plasma chamber is defined by a plurality of longitudinal magnets. The electron gun injects electrons axially into the plasma chamber such that ionization within the plasma chamber occurs in the presence of the additional electrons produced by the electron gun. The electron gun has a cathode for emitting electrons therefrom which is heated by current supplied from an AC power supply while bias potential is provided by a bias power supply. A concentric inner conductor and outer conductor carry heating current to a carbon chuck and carbon pusher which hold the cathode in place and also heat the cathode. In the Advanced Electron Cyclotron Resonance ion source, the electron gun replaces the conventional first stage used in prior electron cyclotron resonance ion generators. 5 figures.

Xie, Z.Q.; Lyneis, C.M.

1993-10-26T23:59:59.000Z

186

5, 52235252, 2005 Size-resolved source  

E-Print Network [OSTI]

, gasoline vehicle, diesel vehicle, copper smelter, and volcano emission. PMF analysis of size% in the fine size range (0.56¬≠2.5 ¬Ķm). The diesel vehicle source contributed the most in the ultra-fine size

Boyer, Edmond

187

Aspects of a high intensity neutron source  

E-Print Network [OSTI]

A unique methodology for creating a neutron source model was developed for deuterons and protons incident on solid phase beryllium and lithium targets. This model was then validated against experimental results already ...

Chapman, Peter H. (Peter Henry)

2010-01-01T23:59:59.000Z

188

Designing subwavelength-structured light sources  

E-Print Network [OSTI]

The laser has long been established as the best possible optical source for fundamental studies and applications requiring high field intensity, single mode operation, a high degree of coherence, a narrow linewidth and ...

Chua, Song Liang

2013-01-01T23:59:59.000Z

189

Tracing meteorite source regions through asteroid spectroscopy  

E-Print Network [OSTI]

By virtue of their landing on Earth, meteorites reside in near-Earth object (NEO) orbits prior to their arrival. Thus the population of observable NEOs, in principle, give the best representation of meteorite source bodies. ...

Thomas, Cristina Ana

2009-01-01T23:59:59.000Z

190

Asymmetric Architecture for Heralded Single Photon Sources  

E-Print Network [OSTI]

Single photon source represent a fundamental building block for optical implementations of quantum information tasks ranging from basic tests of quantum physics to quantum communication and high-resolution quantum measurement. In this paper we investigate the performance of a multiplexed system based on asymmetric configuration of multiple heralded single photon sources. {To compare the effectiveness of different designs we introduce a single-photon source performance index that is based on the value of single photon probability required to achieve a guaranteed signal to noise ratio.} The performance and scalability comparison with both currently existing multiple-source architectures and faint laser configurations reveals an advantage the proposed scheme offers in realistic scenarios. This analysis also provides insights on the potential of using such architectures for integrated implementation.

Luca Mazzarella; Francesco Ticozzi; Alexander V. Sergienko; Giuseppe Vallone; Paolo Villoresi

2013-02-15T23:59:59.000Z

191

Advanced Light Source Activity Report 2000  

SciTech Connect (OSTI)

This is an annual report, detailing activities at the Advanced Light Source for the year 2000. It includes highlights of scientific research by users of the facility as well as information about the development of the facility itself.

Greiner, A.; Moxon, L.; Robinson, A.; Tamura, L.

2001-04-01T23:59:59.000Z

192

Cryogenic hydrogen circulation system of neutron source  

SciTech Connect (OSTI)

Cold neutron sources of reactors and spallation neutron sources are classic high flux neutron sources in operation all over the world. Cryogenic fluids such as supercritical or supercooled hydrogen are commonly selected as a moderator to absorb the nuclear heating from proton beams. By comparing supercritical hydrogen circulation systems and supercooled hydrogen circulation systems, the merits and drawbacks in both systems are summarized. When supercritical hydrogen circulates as the moderator, severe pressure fluctuations caused by temperature changes will occur. The pressure control system used to balance the system pressure, which consists of a heater as an active controller for thermal compensation and an accumulator as a passive volume controller, is preliminarily studied. The results may provide guidelines for design and operation of other cryogenic hydrogen system for neutron sources under construction.

Qiu, Y. N. [Institute of Physics and Chemistry, Chinese Academy of Sciences, BJ100190 China and University of Chinese Academy of Sciences, Chinese Academy of Sciences, BJ100049 (China); Hu, Z. J.; Wu, J. H.; Li, Q.; Zhang, Y. [Institute of Physics and Chemistry, Chinese Academy of Sciences, BJ100190 (China); Zhang, P. [School of Energy and Power Engineering, HuaZhong University of Science and Technology, WH430074 (China); Wang, G. P. [Institute of High Energy Physics, Chinese Academy of Sciences, BJ100049 (China)

2014-01-29T23:59:59.000Z

193

New neutron physics using spallation sources  

SciTech Connect (OSTI)

The extraordinary neutron intensities available from the new spallation pulsed neutron sources open up exciting opportunities for basic and applied research in neutron nuclear physics. The energy range of neutron research which is being explored with these sources extends from thermal energies to almost 800 MeV. The emphasis here is on prospective experiments below 100 keV neutron energy using the intense neutron bursts produced by the Proton Storage Ring (PSR) at Los Alamos. 30 refs., 10 figs.

Bowman, C.D.

1988-01-01T23:59:59.000Z

194

The Advanced Photon Source main control room  

SciTech Connect (OSTI)

The Advanced Photon Source at Argonne National Laboratory is a third-generation light source built in the 1990s. Like the machine itself, the Main Control Room (MCR) employs design concepts based on today`s requirements. The discussion will center on ideas used in the design of the MCR, the comfort of personnel using the design, and safety concerns integrated into the control room layout.

Pasky, S.

1998-07-01T23:59:59.000Z

195

ON COMPUTING UPPER LIMITS TO SOURCE INTENSITIES  

SciTech Connect (OSTI)

A common problem in astrophysics is determining how bright a source could be and still not be detected in an observation. Despite the simplicity with which the problem can be stated, the solution involves complicated statistical issues that require careful analysis. In contrast to the more familiar confidence bound, this concept has never been formally analyzed, leading to a great variety of often ad hoc solutions. Here we formulate and describe the problem in a self-consistent manner. Detection significance is usually defined by the acceptable proportion of false positives (background fluctuations that are claimed as detections, or Type I error), and we invoke the complementary concept of false negatives (real sources that go undetected, or Type II error), based on the statistical power of a test, to compute an upper limit to the detectable source intensity. To determine the minimum intensity that a source must have for it to be detected, we first define a detection threshold and then compute the probabilities of detecting sources of various intensities at the given threshold. The intensity that corresponds to the specified Type II error probability defines that minimum intensity and is identified as the upper limit. Thus, an upper limit is a characteristic of the detection procedure rather than the strength of any particular source. It should not be confused with confidence intervals or other estimates of source intensity. This is particularly important given the large number of catalogs that are being generated from increasingly sensitive surveys. We discuss, with examples, the differences between these upper limits and confidence bounds. Both measures are useful quantities that should be reported in order to extract the most science from catalogs, though they answer different statistical questions: an upper bound describes an inference range on the source intensity, while an upper limit calibrates the detection process. We provide a recipe for computing upper limits that applies to all detection algorithms.

Kashyap, Vinay L.; Siemiginowska, Aneta [Smithsonian Astrophysical Observatory, 60 Garden Street, Cambridge, MA 02138 (United States); Van Dyk, David A.; Xu Jin [Department of Statistics, University of California, Irvine, CA 92697-1250 (United States); Connors, Alanna [Eureka Scientific, 2452 Delmer Street, Suite 100, Oakland, CA 94602-3017 (United States); Freeman, Peter E. [Department of Statistics, Carnegie Mellon University, 5000 Forbes Avenue, Pittsburgh, PA 15213 (United States); Zezas, Andreas, E-mail: vkashyap@cfa.harvard.ed, E-mail: asiemiginowska@cfa.harvard.ed, E-mail: dvd@ics.uci.ed, E-mail: jinx@ics.uci.ed, E-mail: aconnors@eurekabayes.co, E-mail: pfreeman@cmu.ed, E-mail: azezas@cfa.harvard.ed [Physics Department, University of Crete, P.O. Box 2208, GR-710 03, Heraklion, Crete (Greece)

2010-08-10T23:59:59.000Z

196

A Polarized Positron Source for CEBAF  

SciTech Connect (OSTI)

A compact polarized positron source for Jefferson Lab is discussed. This scheme relies upon a high polarization (85%), high current (1 mA), low-energy (<100 MeV) electron beam to generate polarized positrons in a conversion target via polarized bremsstrahlung and pair creation. GEANT4 is used to simulate source distributions suitable for a CEBAF-like injector with positron polarization approx60% and nano-Ampere intensity. An experiment to test this scheme is outlined.

Dumas, J. [Laboratoire de Physique Subatomique et de Cosmologie, IN2P3/CNRS-Universite Joseph Fourier-INP, 53, rue des Martyrs, 38026 Grenoble Cedex (France); Thomas Jefferson National Accelerator Facility, 12000 Jefferson Avenue, Newport News, VA 23606 (United States); Grames, J. [Thomas Jefferson National Accelerator Facility, 12000 Jefferson Avenue, Newport News, VA 23606 (United States); Voutier, E. [Laboratoire de Physique Subatomique et de Cosmologie, IN2P3/CNRS-Universite Joseph Fourier-INP, 53, rue des Martyrs, 38026 Grenoble Cedex (France)

2009-09-02T23:59:59.000Z

197

Fluid driven torsional dipole seismic source  

DOE Patents [OSTI]

A compressible fluid powered oscillating downhole seismic source device capable of periodically generating uncontaminated horizontally-propagated, shear waves is provided. A compressible fluid generated oscillation is created within the device which imparts an oscillation to a housing when the device is installed in a housing such as the cylinder off an existing downhole tool, thereby a torsional seismic source is established. Horizontal waves are transferred to the surrounding bore hole medium through downhole clamping.

Hardee, Harry C. (Albuquerque, NM)

1991-01-01T23:59:59.000Z

198

Source Recertification, Refurbishment, and Transfer Logistics  

SciTech Connect (OSTI)

The 2012 Gap Analysis of Department of Energy Radiological Sealed Sources, Standards, and Materials for Safeguards Technology Development [1] report, and the subsequent Reconciliation of Source Needs and Surpluses across the U.S. Department of Energy National Laboratory Complex [2] report, resulted in the identification of 33 requests for nuclear or radiological sealed sources for which there was potentially available, suitable material from within the U.S. Department of Energy (DOE) complex to fill the source need. Available, suitable material was defined by DOE laboratories as material slated for excess, or that required recertification or refurbishment before being used for safeguards technology development. This report begins by outlining the logistical considerations required for the shipment of nuclear and radiological materials between DOE laboratories. Then, because of the limited need for transfer of matching sources, the report also offers considerations for an alternative approach Ė the shipment of safeguards equipment between DOE laboratories or technology testing centers. Finally, this report addresses repackaging needs for the two source requests for which there was available, suitable material within the DOE complex.

Gastelum, Zoe N.; Duckworth, Leesa L.; Greenfield, Bryce A.; Doll, Stephanie R.

2013-09-01T23:59:59.000Z

199

Special Application Thermoelectric Micro Isotope Power Sources  

SciTech Connect (OSTI)

Promising design concepts for milliwatt (mW) size micro isotope power sources (MIPS) are being sought for use in various space and terrestrial applications, including a multitude of future NASA scientific missions and a range of military applications. To date, the radioisotope power sources (RPS) used on various space and terrestrial programs have provided power levels ranging from one-half to several hundred watts. In recent years, the increased use of smaller spacecraft and planned new scientific space missions by NASA, special terrestrial and military applications suggest the need for lower power, including mW level, radioisotope power sources. These power sources have the potential to enable such applications as long-lived meteorological or seismological stations distributed across planetary surfaces, surface probes, deep space micro-spacecraft and sub-satellites, terrestrial sensors, transmitters, and micro-electromechanical systems. The power requirements are in the range of 1 mW to several hundred mW. The primary technical requirements for space applications are long life, high reliability, high specific power, and high power density, and those for some special military uses are very high power density, specific power, reliability, low radiological induced degradation, and very low radiation leakage. Thermoelectric conversion is of particular interest because of its technological maturity and proven reliability. This paper summarizes the thermoelectric, thermal, and radioisotope heat source designs and presents the corresponding performance for a number of mW size thermoelectric micro isotope power sources.

Heshmatpour, Ben; Lieberman, Al; Khayat, Mo; Leanna, Andrew; Dobry, Ted [Teledyne Energy Systems, Incorporated, 10707 Gilroy Road, Hunt Valley, MD 21031 (United States)

2008-01-21T23:59:59.000Z

200

Quantum key distribution with entangled photon sources  

E-Print Network [OSTI]

A parametric down-conversion (PDC) source can be used as either a triggered single photon source or an entangled photon source in quantum key distribution (QKD). The triggering PDC QKD has already been studied in the literature. On the other hand, a model and a post-processing protocol for the entanglement PDC QKD are still missing. In this paper, we fill in this important gap by proposing such a model and a post-processing protocol for the entanglement PDC QKD. Although the PDC model is proposed to study the entanglement-based QKD, we emphasize that our generic model may also be useful for other non-QKD experiments involving a PDC source. Since an entangled PDC source is a basis independent source, we apply Koashi-Preskill's security analysis to the entanglement PDC QKD. We also investigate the entanglement PDC QKD with two-way classical communications. We find that the recurrence scheme increases the key rate and Gottesman-Lo protocol helps tolerate higher channel losses. By simulating a recent 144km open-a...

Ma, X; Lo, H K; Ma, Xiongfeng; Fung, Chi-Hang Fred; Lo, Hoi-Kwong

2007-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "addressee source pm-o" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Radioisotope Power Sources for MEMS Devices,  

SciTech Connect (OSTI)

Microelectromechanical systems (MEMS) comprise a rapidly expanding research field with potential applications varying from sensors in airbags to more recent optical applications. Depending on the application, these devices often require an on-board power source for remote operation, especially in cases requiring operation for an extended period of time. Previously suggested power sources include fossil fuels and solar energy, but nuclear power sources may provide significant advantages for certain applications. Hence, the objective of this study is to establish the viability of using radioisotopes to power realistic MEMS devices. A junction-type battery was constructed using silicon and a {sup 63}Ni liquid source. A source volume containing 64 {micro}Ci provided a power of {approx}0.07 nW. A more novel application of nuclear sources for MEMS applications involves the creation of a resonator that is driven by charge collection in a cantilever beam. Preliminary results have established the feasibility of this concept, and future work will optimize the design for various applications.

Blanchard, J.P.

2001-06-17T23:59:59.000Z

202

In-Source Fragmentation and the Sources of Partially Tryptic Peptides in Shotgun Proteomics  

SciTech Connect (OSTI)

Partially tryptic peptides are often identified in shotgun proteomics using trypsin as the proteolytic enzyme; however, it has been controversial regarding the sources of such partially tryptic peptides. Herein we investigate the impact of in-source fragmentation on shotgun proteomics using three biological samples, including a standard protein mixture, a mouse brain tissue homogenate, and a mouse plasma sample. Since the in-source fragments of a peptide retain the same elution time with its parent fully tryptic peptide, the partially tryptic peptides from in-source fragmentation can be distinguished from the other partially tryptic peptides by plotting the observed retention times against the computationally predicted retention times. Most partially tryptic in-source fragmentation artifacts were misaligned from the linear distribution of fully tryptic peptides. The impact of in-source fragmentation on peptide identifications was clearly significant in a less complex sample such as a standard protein digest, where ~60 % of unique peptides were observed as partially tryptic peptides from in-source fragmentation. In mouse brain or mouse plasma samples, in-source fragmentation contributed to 1-3 % of all identified peptides. The other major source of partially tryptic peptides in complex biological samples is presumably proteolytic processing by endogenous proteases in the samples. By filtering out the in-source fragmentation artifacts from the identified partially tryptic or non-tryptic peptides, it is possible to directly survey in-vivo proteolytic processing in biological samples such as blood plasma. ?

Kim, Jong Seo; Monroe, Matthew E.; Camp, David G.; Smith, Richard D.; Qian, Weijun

2013-02-01T23:59:59.000Z

203

Large source test stand for H/sup -/(D/sup -/) ion source  

SciTech Connect (OSTI)

The Brookhaven National Laboratory Neutral Beam Group has constructed a large source test stand for testing of the various source modules under development. The first objective of the BNL program is to develop a source module capable of delivering 10A of H/sup -/(D/sup -/) at 25 kV operating in the steady state mode with satisfactory gas and power efficiency. The large source test stand contains gas supply and vacuum pumping systems, source cooling systems, magnet power supplies and magnet cooling systems, two arc power supplies rated at 25 kW and 50 kW, a large battery driven power supply and an extractor electrode power supply. Figure 1 is a front view of the vacuum vessel showing the control racks with the 36'' vacuum valves and refrigerated baffles mounted behind. Figure 2 shows the rear view of the vessel with a BNL Mk V magnetron source mounted in the source aperture and also shows the cooled magnet coils. Currently two types of sources are under test: a large magnetron source and a hollow cathode discharge source.

Larson, R.; McKenzie-Wilson, R.

1981-01-01T23:59:59.000Z

204

Quantum key distribution with entangled photon sources  

E-Print Network [OSTI]

A parametric down-conversion (PDC) source can be used as either a triggered single photon source or an entangled photon source in quantum key distribution (QKD). The triggering PDC QKD has already been studied in the literature. On the other hand, a model and a post-processing protocol for the entanglement PDC QKD are still missing. In this paper, we fill in this important gap by proposing such a model and a post-processing protocol for the entanglement PDC QKD. Although the PDC model is proposed to study the entanglement-based QKD, we emphasize that our generic model may also be useful for other non-QKD experiments involving a PDC source. Since an entangled PDC source is a basis independent source, we apply Koashi-Preskill's security analysis to the entanglement PDC QKD. We also investigate the entanglement PDC QKD with two-way classical communications. We find that the recurrence scheme increases the key rate and Gottesman-Lo protocol helps tolerate higher channel losses. By simulating a recent 144km open-air PDC experiment, we compare three implementations -- entanglement PDC QKD, triggering PDC QKD and coherent state QKD. The simulation result suggests that the entanglement PDC QKD can tolerate higher channel losses than the coherent state QKD. The coherent state QKD with decoy states is able to achieve highest key rate in the low and medium-loss regions. By applying Gottesman-Lo two-way post-processing protocol, the entanglement PDC QKD can tolerate up to 70dB combined channel losses (35dB for each channel) provided that the PDC source is placed in between Alice and Bob. After considering statistical fluctuations, the PDC setup can tolerate up to 53dB channel losses.

Xiongfeng Ma; Chi-Hang Fred Fung; Hoi-Kwong Lo

2007-03-14T23:59:59.000Z

205

ATLBS EXTENDED SOURCE SAMPLE: THE EVOLUTION IN RADIO SOURCE MORPHOLOGY WITH FLUX DENSITY  

SciTech Connect (OSTI)

Based on the Australia Telescope Low Brightness Survey (ATLBS) we present a sample of extended radio sources and derive morphological properties of faint radio sources. One hundred nineteen radio galaxies form the ATLBS Extended Source Sample (ATLBS-ESS) consisting of all sources exceeding 30'' in extent and integrated flux densities exceeding 1 mJy. We give structural details along with information on galaxy identifications and source classifications. The ATLBS-ESS, unlike samples with higher flux-density limits, has almost equal fractions of FR-I and FR-II radio galaxies, with a large fraction of the FR-I population exhibiting 3C31-type structures. Significant asymmetry in lobe extents appears to be a common occurrence in the ATLBS-ESS FR-I sources compared with FR-II sources. We present a sample of 22 FR-Is at z > 0.5 with good structural information. The detection of several giant radio sources, with size exceeding 0.7 Mpc, at z > 1 suggests that giant radio sources are not less common at high redshifts. The ESS also includes a sample of 28 restarted radio galaxies. The relative abundance of dying and restarting sources is indicative of a model where radio sources undergo episodic activity in which an active phase is followed by a brief dying phase that terminates with restarting of the central activity; in any massive elliptical a few such activity cycles wherein adjacent events blend may constitute the lifetime of a radio source and such bursts of blended activity cycles may be repeated over the age of the host. The ATLBS-ESS includes a 2 Mpc giant radio galaxy with the lowest surface brightness lobes known to date.

Saripalli, L.; Subrahmanyan, R.; Thorat, K.; Ekers, R. D. [Raman Research Institute, C. V. Raman Avenue, Sadashivanagar, Bangalore 560080 (India); Hunstead, R. W.; Johnston, H. M.; Sadler, E. M., E-mail: lsaripal@rri.res.in [Sydney Institute for Astronomy, School of Physics, University of Sydney, NSW 2006 (Australia)

2012-04-01T23:59:59.000Z

206

Note: Development of ESS Bilbao's proton ion source: Ion Source Hydrogen Positive  

SciTech Connect (OSTI)

The Ion Source Hydrogen positive is a 2.7 GHz off-resonance microwave discharge ion source. It uses four coils to generate an axial magnetic field in the plasma chamber around 0.1 T that exceeds the ECR resonance field. A new magnetic system was designed as a combination of the four coils and soft iron in order to increase the reliability of the source. The description of the simulations of the magnetic field and the comparison with the magnetic measurements are presented. Moreover, results of the initial commissioning of the source for extraction voltage until 50 kV will be reported.

Miracoli, R., E-mail: rmiracoli@essbilbao.org; Feuchtwanger, J.; Arredondo, I.; Belver, D.; Gonzalez, P. J.; Corres, J.; Djekic, S.; Echevarria, P.; Eguiraun, M.; Garmendia, N.; Muguira, L. [ESS-Bilbao, Leioa (Spain)] [ESS-Bilbao, Leioa (Spain)

2014-02-15T23:59:59.000Z

207

BLIND AUDIO SOURCE SEPARATION USING SHORT+LONG TERM AR SOURCE MODELS AND SPECTRUM MATCHING  

E-Print Network [OSTI]

) determined case the source separation can be performed satisfactorily, especially in a clean environment industrial partners: BMW Group, Cisco Systems, Monaco Telecom, Orange, SAP, SFR, STEr- icsson, Swisscom

Gesbert, David

208

Accelerator Sources for THz science: A Review  

SciTech Connect (OSTI)

Free Electron Lasers have been around since 1977 providing not only a test bed for the physics of FELs and electron/photon interactions but as a workhorse of scientific research. More than 30 FELs are presently operating around the world spanning a wavelength range from the millimeter region to the hard x-ray using direct current and rf linear accelerators or storage rings as electron sources. The characteristics that have driven the development of these sources are the desire for high peak and average power, high micropulse energies, wavelength tunability, timing flexibility, and wavelengths that are unavailable from more conventional laser sources. Operation of FELs in the far infrared to terahertz regime poses special challenges which have been and are being addressed at a number of facilities around the world. This paper will review a number of former and existing FELs operating in this regime and discuss future efforts. Broadband collective radiation from relativistic electrons also plays a significant role in the production of FIR/THz radiation and several groups are taking advantage of this source for users. Applications for use of the radiation have evolved from simple imaging to complex pump probe tests of insulator/metal transitions and energy flow in organic molecules. We will discuss the technologies for generating the IR/FIR/THz radiation and cover some of the unique applications of such sources.

Neil, George R. [Thomas Jefferson National Accelerator Facility, Newport News, VA (United States)

2014-01-01T23:59:59.000Z

209

Light sources based on semiconductor current filaments  

DOE Patents [OSTI]

The present invention provides a new type of semiconductor light source that can produce a high peak power output and is not injection, e-beam, or optically pumped. The present invention is capable of producing high quality coherent or incoherent optical emission. The present invention is based on current filaments, unlike conventional semiconductor lasers that are based on p-n junctions. The present invention provides a light source formed by an electron-hole plasma inside a current filament. The electron-hole plasma can be several hundred microns in diameter and several centimeters long. A current filament can be initiated optically or with an e-beam, but can be pumped electrically across a large insulating region. A current filament can be produced in high gain photoconductive semiconductor switches. The light source provided by the present invention has a potentially large volume and therefore a potentially large energy per pulse or peak power available from a single (coherent) semiconductor laser. Like other semiconductor lasers, these light sources will emit radiation at the wavelength near the bandgap energy (for GaAs 875 nm or near infra red). Immediate potential applications of the present invention include high energy, short pulse, compact, low cost lasers and other incoherent light sources.

Zutavern, Fred J. (Albuquerque, NM); Loubriel, Guillermo M. (Albuquerque, NM); Buttram, Malcolm T. (Sandia Park, NM); Mar, Alan (Albuquerque, NM); Helgeson, Wesley D. (Albuquerque, NM); O'Malley, Martin W. (Edgewood, NM); Hjalmarson, Harold P. (Albuquerque, NM); Baca, Albert G. (Albuquerque, NM); Chow, Weng W. (Cedar Crest, NM); Vawter, G. Allen (Albuquerque, NM)

2003-01-01T23:59:59.000Z

210

Free and Open Source Software for Development  

E-Print Network [OSTI]

Development organizations and International Non-Governmental Organizations have been emphasizing the high potential of Free and Open Source Software for the Less Developed Countries. Cost reduction, less vendor dependency and increased potential for local capacity development have been their main arguments. In spite of its advantages, Free and Open Source Software is not widely adopted at the African continent. In this book the authors will explore the grounds on with these expectations are based. Where do they come from and is there evidence to support these expectations? Over the past years several projects have been initiated and some good results have been achieved, but at the same time many challenges were encountered. What lessons can be drawn from these experiences and do these experiences contain enough evidence to support the high expectations? Several projects and their achievements will be considered. In the final part of the book the future of Free and Open Source Software for Development will be explored. Special attention is given to the African continent since here challenges are highest. What is the role of Free and open Source Software for Development and how do we need to position and explore the potential? What are the threats? The book aims at professionals that are engaged in the design and implementation of ICT for Development (ICT4D) projects and want to improve their understanding of the role Free and Open Source Software can play.

Victor van Reijswoud; Arjan de Jager

2008-08-27T23:59:59.000Z

211

Particle size distribution of indoor aerosol sources  

SciTech Connect (OSTI)

As concern about Indoor Air Quality (IAQ) has grown in recent years, it has become necessary to determine the nature of particles produced by different indoor aerosol sources and the typical concentration that these sources tend to produce. These data are important in predicting the dose of particles to people exposed to these sources and it will also enable us to take effective mitigation procedures. Further, it will also help in designing appropriate air cleaners. A new state of the art technique, DMPS (Differential Mobility Particle Sizer) System is used to determine the particle size distributions of a number of sources. This system employs the electrical mobility characteristics of these particles and is very effective in the 0.01--1.0 {mu}m size range. A modified system that can measure particle sizes in the lower size range down to 3 nm was also used. Experimental results for various aerosol sources is presented in the ensuing chapters. 37 refs., 20 figs., 2 tabs.

Shah, K.B.

1990-10-24T23:59:59.000Z

212

Supernate source term analysis: Revision 1  

SciTech Connect (OSTI)

The HM Process (modified PUREX) has been used in the H-Canyon since 1959 to recover uranium and byproduct neptunium. The PUREX process has been used in the Separation facilities in F and H-Area. This report analyzes both the inhalation and ingestion radionuclide dose impact of the HM and PUREX process soluble portion of their waste streams. The spent fuel assemblies analyzed are the Mark 16B, Mar 22 for the HM process, and the Mark 31A, Mark 31B for the PUREX process. The results from this analysis are combined with an analysis of the current Safety Analysis Report SAR source term to evaluate source terms for HLW supernate. Analysis of fission yield data and SAR source term values demonstrates that a limited number of radionuclides contribute 1% or more to the total dose and that cesium and plutonium isotopes are the radionuclides with major impact in the supernate source term. This report analyses both volatile and evaporative impact as recommended by DOE guidance. In reality, the only radionuclide volatilized during evaporative conditions is tritium. No evidence of selective volatility occurs during forced evaporation in HLW. The results obtained permit reducing the list of radionuclides to be considered in the development of source terms to support the High Level Waste Safety Analysis Report.

Aponte, C.I.

1994-10-13T23:59:59.000Z

213

Ion sources for ion implantation technology (invited)  

SciTech Connect (OSTI)

Ion sources for ion implantation are introduced. The technique is applied not only to large scale integration (LSI) devices but also to flat panel display. For LSI fabrication, ion source scheduled maintenance cycle is most important. For CMOS image sensor devices, metal contamination at implanted wafer is most important. On the other hand, to fabricate miniaturized devices, cluster ion implantation has been proposed to make shallow PN junction. While for power devices such as silicon carbide, aluminum ion is required. For doping processes of LCD fabrication, a large ion source is required. The extraction area is about 150 cm ◊ 10 cm, and the beam uniformity is important as well as the total target beam current.

Sakai, Shigeki, E-mail: sakai-shigeki@nissin.co.jp; Hamamoto, Nariaki; Inouchi, Yutaka; Umisedo, Sei; Miyamoto, Naoki [Nissin Ion Equipment co., ltd, 575 Kuze-Tonoshiro-cho Minami-ku, Kyoto 601-8205 (Japan)] [Nissin Ion Equipment co., ltd, 575 Kuze-Tonoshiro-cho Minami-ku, Kyoto 601-8205 (Japan)

2014-02-15T23:59:59.000Z

214

An Efficient RF Source for Jlab  

SciTech Connect (OSTI)

We propose the development of a highly reliable high efficiency RF source for JLAB with a lower lifetime cost operating at 80% efficiency with system operating costs of about 0.7M$/year for the 6 GeV machine. The design of the RF source will be based upon two injection locked magnetrons in a novel combining architecture for amplitude modulation and a cross field amplifier (CFA) as an output tube for the 12 GeV upgrade. A cost analysis including efficiency and reliability will be performed to determine the optimum system architecture. Several different system architectures will be designed and evaluated for a dual injection locked magnetron source using novel combining techniques and possibly a CFA as the output tube. A paper design for the 1497 MHz magnetron system will be completed. The optimum system architecture with all relevant specifications will be completed so that a prototype can be built.

Neubauer, M. [Muons, Inc.; Dudas, A. [Muons, Inc.; Rimmer, Robert A. [JLAB; Wang, Haipeng [JLAB

2013-12-01T23:59:59.000Z

215

Sources of Gravitational Waves: Theory and Observations  

E-Print Network [OSTI]

Gravitational-wave astronomy will soon become a new tool for observing the Universe. Detecting and interpreting gravitational waves will require deep theoretical insights into astronomical sources. The past three decades have seen remarkable progress in analytical and numerical computations of the source dynamics, development of search algorithms and analysis of data from detectors with unprecedented sensitivity. This Chapter is devoted to examine the advances and future challenges in understanding the dynamics of binary and isolated compact-object systems, expected cosmological sources, their amplitudes and rates, and highlights of results from gravitational-wave observations. All of this is a testament to the readiness of the community to open a new window for observing the cosmos, a century after gravitational waves were first predicted by Albert Einstein.

Alessandra Buonanno; B. S. Sathyaprakash

2014-10-28T23:59:59.000Z

216

Source replenishment device for vacuum deposition  

DOE Patents [OSTI]

A material source replenishment device for use with a vacuum deposition apparatus is described. The source replenishment device comprises an intermittent motion producing gear arrangement disposed within the vacuum deposition chamber. An elongated rod having one end operably connected to the gearing arrangement is provided with a multiarmed head at the opposite end disposed adjacent the heating element of the vacuum deposition apparatus. An inverted U-shaped source material element is releasably attached to the outer end of each arm member whereby said multiarmed head is moved to locate a first of said material elements above said heating element, whereupon said multiarmed head is lowered to engage said material element with the heating element and further lowered to release said material element on the heating element. After vaporization of said material element, second and subsequent material elements may be provided to the heating element without the need for opening the vacuum deposition apparatus to the atmosphere.

Hill, R.A.

1986-05-15T23:59:59.000Z

217

Neutron sources: Present practice and future potential  

SciTech Connect (OSTI)

The present capability and future potential of accelerator-based monoenergetic and white neutron sources are outlined in the context of fundamental and applied neutron-nuclear research. The neutron energy range extends from thermal to 500 MeV, and the time domain from steady-state to pico-second pulsed sources. Accelerator technology is summarized, including the production of intense light-ion, heavy-ion and electron beams. Target capabilities are discussed with attention to neutron-producing efficiency and power-handling capabilities. The status of underlying neutron-producing reactions is summarized. The present and future use of neutron sources in: fundamental neutron-nuclear research, nuclear data acquisition, materials damage studies, engineering tests, and biomedical applications are discussed. Emphasis is given to current status, near-term advances well within current technology, and to long-range projections. 90 refs., 4 figs.

Cierjacks, S.; Smith, A.B.

1988-01-01T23:59:59.000Z

218

Present state of the SOURCES computer code  

SciTech Connect (OSTI)

In various stages of development for over two decades, the SOURCES computer code continues to calculate neutron production rates and spectra from four types of problems: homogeneous media, two-region interfaces, three-region interfaces and that of a monoenergetic alpha particle beam incident on a slab of target material. Graduate work at the University of Missouri - Rolla, in addition to user feedback from a tutorial course, provided the impetus for a variety of code improvements. Recently upgraded to version 4B, initial modifications to SOURCES focused on updates to the 'tape5' decay data library. Shortly thereafter, efforts focused on development of a graphical user interface for the code. This paper documents the Los Alamos SOURCES Tape1 Creator and Library Link (LASTCALL) and describes additional library modifications in more detail. Minor improvements and planned enhancements are discussed.

Shores, E. F. (Erik F.)

2002-01-01T23:59:59.000Z

219

Stress Wave Source Characterization: Impact, Fracture, and Sliding Friction  

E-Print Network [OSTI]

stress wave sources from the PMMA and rock are then linkedof a 3-D source inside an artificial rock, J. Sound Vib.two different calibration sources on the rock base plate. a,

McLaskey, Gregory Christofer

2011-01-01T23:59:59.000Z

220

TR-025 Geomorphology March 2003 Schmidt Creek Sediment Sources  

E-Print Network [OSTI]

TR-025 Geomorphology March 2003 Schmidt Creek Sediment Sources and the Johnstone Strait Killer, Thomas. 2003. Schmidt Creek Sediment Sources and the Johnstone Strait Killer Whale Rubbing Beach. Res.................................................................................................................... 2 3. Sediment Sources - Natural and Logging Related

Note: This page contains sample records for the topic "addressee source pm-o" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

MODELING, VERIFICATION AND OPTIMIZATION OF HYBRID GROUND SOURCE HEAT PUMP  

E-Print Network [OSTI]

MODELING, VERIFICATION AND OPTIMIZATION OF HYBRID GROUND SOURCE HEAT PUMP SYSTEMS IN ENERGYPLUS, VERIFICATION AND OPTIMIZATION OF HYBRID GROUND SOURCE HEAT PUMP SYSTEMS IN ENERGYPLUS Thesis Approved by: Dr.................................................................................................................... 16 MODELING OF HYBRID GROUND SOURCE HEAT PUMP SYSTEMS IN ENERGYPLUS

222

Europeans plans their next big source  

SciTech Connect (OSTI)

European neutron-scattering researchers announced the next step in plans to build the world`s most powerful pulsed-neutron source by 2010. A just released three year technical study detailed the technical specifications for the new machine, and the five partner institutions agreed to seek funding for a 3-year research and development phase to prove the concept. This article goes on to discuss the possibilities and the future for the European Spallation Source (ESS) neutron facility, and well as the funding problems.

Hellemans, A.

1997-05-09T23:59:59.000Z

223

Cationically polymerizable monomers derived from renewable sources  

SciTech Connect (OSTI)

The objectives of this project are to design and synthesize novel monomers which orginate from renewable biological sources and to carry out their rapid, efficient, pollution-free and energy efficient cationic polymerization to useful products under the influence of ultraviolet light or heat. A summary of the results of the past year's research on cationically polymerizable monomers derived from renewable sources is presented. Three major areas of investigation corresponding to the different classes of naturally occurring starting materials were investigated; epoxidized terpenes and natural rubber and vinyl ethers from alcohols and carbohydrates.

Crivello, J.V.

1992-10-01T23:59:59.000Z

224

Synchronization System for Next Generation Light Sources  

SciTech Connect (OSTI)

An alternative synchronization technique Ė one that would allow explicit control of the pulse train including its repetition rate and delay is clearly desired. We propose such a scheme. Our method is based on optical interferometry and permits synchronization of the pulse trains generated by two independent mode-locked lasers. As the next generation x-ray sources will be driven by a clock signal derived from a mode-locked optical source, our technique will provide a way to synchronize x-ray probe with the optical pump pulses.

Zavriyev, Anton

2014-03-27T23:59:59.000Z

225

Open Source Software Update | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion | Department ofT ib l L d F SSales LLCDiesel Engines |Open Source Software Update Open Source

226

POET: A Scripting Language For Applying Parameterized Source-to-source Program  

E-Print Network [OSTI]

POET: A Scripting Language For Applying Parameterized Source-to-source Program Transformations Qing Yi (qingyi@cs.utsa.edu) University of Texas at San Antonio Abstract We present POET, a scripting as well as building ad-hoc translators between these languages. We have used POET to support a large

Yi, Qing

227

POET: A Scripting Language For Applying Parameterized Source-to-source Program  

E-Print Network [OSTI]

POET: A Scripting Language For Applying Parameterized Source-to-source Program Transformations Qing Yi (qingyi@cs.utsa.edu) University of Texas at San Antonio Abstract We present POET, a scripting as well as building ad- hoc translators between these languages. We have used POET to support a large

Yi, Qing

228

DEVELOPMENT OF NEW MID-INFRARED ULTRAFAST LASER SOURCES FOR COMPACT COHERENT X-RAY SOURCES  

SciTech Connect (OSTI)

In this project, we proposed to develop laser based mid-infrared lasers as a potentially robust and reliable source of ultrafast pulses in the mid-infrared region of the spectrum, and to apply this light source to generating bright, coherent, femtosecond-to-attosecond x-ray beams.

Sterling Backus

2012-05-14T23:59:59.000Z

229

Recovery Act - Geothermal Technologies Program:Ground Source...  

Broader source: Energy.gov (indexed) [DOE]

Recovery Act - Geothermal Technologies Program:Ground Source Heat Pumps Recovery Act - Geothermal Technologies Program:Ground Source Heat Pumps A detailled description of the...

230

Integration of Novel Flux Coupling Motor and Current Source Inverter...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Current Source Inverters for HEVs and FCVs Vehicle Technologies Office Merit Review 2014: Wireless Charging Integration of Novel Flux Coupling Motor and Current Source Inverter...

231

acoustic source localization: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Dan 113 2011 IEEE Workshop on Applications of Signal Processing to Audio and Acoustics October 16-19, 2011, New Paltz, NY INFORMED SOURCE SEPARATION: UNDERDETERMINED SOURCE SIGNAL...

232

Sources of Technical Variability in Quantitative LC-MS Proteomics...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Sources of Technical Variability in Quantitative LC-MS Proteomics: Human Brain Tissue Sample Analysis. Sources of Technical Variability in Quantitative LC-MS Proteomics: Human...

233

adjacent point sources: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

extraction capabilities of MOPEX. Point source extraction is implemented as a two step process: point source detection and profile fitting. Non-linear matched filtering of input...

234

Data Analysis from Ground Source Heat Pump Demonstration Projects...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Analysis from Ground Source Heat Pump Demonstration Projects Data Analysis from Ground Source Heat Pump Demonstration Projects Comparison of building energy use before and after...

235

Oak Ridge Removes Laboratory's Greatest Source of Groundwater...  

Broader source: Energy.gov (indexed) [DOE]

Removes Laboratory's Greatest Source of Groundwater Contamination Oak Ridge Removes Laboratory's Greatest Source of Groundwater Contamination May 1, 2012 - 12:00pm Addthis Workers...

236

Advanced Variable Speed Air-Source Integrated Heat Pump 2013...  

Energy Savers [EERE]

Advanced Variable Speed Air-Source Integrated Heat Pump 2013 Peer Review Advanced Variable Speed Air-Source Integrated Heat Pump 2013 Peer Review Emerging Technologies Project for...

237

Stanford Synchrotron Radiation Light Source (SSRL) | U.S. DOE...  

Office of Science (SC) Website

Syncrotron Light Source (NSLS-II) Stanford Synchrotron Radiation Light Source (SSRL) Neutron Scattering Facilities Nanoscale Science Research Centers (NSRCs) Projects...

238

Piezotube Borehole Seismic Source for Continuous Crosswell Monitoring...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Piezotube Borehole Seismic Source for Continuous Crosswell Monitoring Lawrence Berkeley National Laboratory Contact LBL About This Technology (a) Peizotube source, as deployed...

239

ERP SOURCE ESTIMATION BY INTEGRATION OF ANATOMICAL AND  

E-Print Network [OSTI]

ERP SOURCE ESTIMATION BY INTEGRATION OF ANATOMICAL AND DYNAMICAL CONSTRAINTS Thesis submitted a small EEG signal analysis project under his supervision, in which I applied blind source separation

240

Aerosol Composition and Source Apportionment in the Mexico City...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Aerosol Composition and Source Apportionment in the Mexico City Metropolitan Area with PIXEPESASTIM and Multivariate Analysis. Aerosol Composition and Source Apportionment in the...

Note: This page contains sample records for the topic "addressee source pm-o" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Hybrid Ground Source System Analysis and Tool Development | Department...  

Broader source: Energy.gov (indexed) [DOE]

Hybrid Ground Source System Analysis and Tool Development Hybrid Ground Source System Analysis and Tool Development Project objectives: 1. Compile filtered hourly data for three...

242

Convergent Bayesian formulations of blind source separation and electromagnetic source estimation  

E-Print Network [OSTI]

We consider two areas of research that have been developing in parallel over the last decade: blind source separation (BSS) and electromagnetic source estimation (ESE). BSS deals with the recovery of source signals when only mixtures of signals can be obtained from an array of detectors and the only prior knowledge consists of some information about the nature of the source signals. On the other hand, ESE utilizes knowledge of the electromagnetic forward problem to assign source signals to their respective generators, while information about the signals themselves is typically ignored. We demonstrate that these two techniques can be derived from the same starting point using the Bayesian formalism. This suggests a means by which new algorithms can be developed that utilize as much relevant information as possible. We also briefly mention some preliminary work that supports the value of integrating information used by these two techniques and review the kinds of information that may be useful in addressing the...

Knuth, Kevin H

2015-01-01T23:59:59.000Z

243

Cyclotron-based neutron source for BNCT  

SciTech Connect (OSTI)

Kyoto University Research Reactor Institute (KURRI) and Sumitomo Heavy Industries, Ltd. (SHI) have developed a cyclotron-based neutron source for Boron Neutron Capture Therapy (BNCT). It was installed at KURRI in Osaka prefecture. The neutron source consists of a proton cyclotron named HM-30, a beam transport system and an irradiation and treatment system. In the cyclotron, H- ions are accelerated and extracted as 30 MeV proton beams of 1 mA. The proton beams is transported to the neutron production target made by a beryllium plate. Emitted neutrons are moderated by lead, iron, aluminum and calcium fluoride. The aperture diameter of neutron collimator is in the range from 100 mm to 250 mm. The peak neutron flux in the water phantom is 1.8 Multiplication-Sign 109 neutrons/cm{sup 2}/sec at 20 mm from the surface at 1 mA proton beam. The neutron source have been stably operated for 3 years with 30 kW proton beam. Various pre-clinical tests including animal tests have been done by using the cyclotron-based neutron source with {sup 10}B-p-Borono-phenylalanine. Clinical trials of malignant brain tumors will be started in this year.

Mitsumoto, T.; Yajima, S.; Tsutsui, H.; Ogasawara, T.; Fujita, K. [Sumitomo Heavy Industries, Ltd (Japan); Tanaka, H.; Sakurai, Y.; Maruhashi, A. [Kyoto University Research Reactor Institute (Japan)

2013-04-19T23:59:59.000Z

244

X-ray source populations in galaxies  

E-Print Network [OSTI]

Today's sensitive, high-resolution X-ray observations allow the study of populations of X-ray sources, in the luminosity range of Galactic X-ray binaries, in galaxies as distant as 20-30 Mpc. The traditional astronomical tools of photometric diagrams and luminosity functions are now applied to these populations, providing a direct probe of the evolved binary component of different stellar populations. The study of the X-ray populations of E and S0 galaxies has revamped the debate on the formation and evolution of low-mass X-ray binaries (LMXBs) and on the role of globular clusters in these processes. While overall stellar mass drives the amount of X-ray binaries in old stellar populations, the amount of sources in star forming galaxies is related to the star formation rate. Short-lived, luminous, high-mass binaries (HMXBs) dominate these young populations. The most luminous sources in these systems are the debated ULXs, which have been suggested to be ~100-1000 Msol black holes, but could alternatively include a number of binaries with stellar mass black holes. Very soft sources have also been discovered in many galaxies and their nature is currently being debated. Observations of the deep X-ray sky, and comparison with deep optical surveys, are providing the first evidence of the X-ray evolution of galaxies.

G. Fabbiano

2005-11-16T23:59:59.000Z

245

Ultrabright Backward-wave Biphoton Source  

E-Print Network [OSTI]

We calculate the properties of a biphoton source based on resonant backward-wave spontaneous parametric down-conversion. We show that the biphotons are generated in a single longitudinal mode having a subnatural linewidth and a Glauber correlation time exceeding 65 ns.

Chih-Sung Chuu; S. E. Harris

2011-05-01T23:59:59.000Z

246

FINITE-EXTENT K-2 KINEMATIC SOURCE  

E-Print Network [OSTI]

FINITE-EXTENT K-2 KINEMATIC SOURCE MODELLING: THE 1999 ATHENS EARTHQUAKE STRONG. Direct S-waves are presumably dominant in the wave field, so these waves only are taken into account the strongest (S-wave) phase. In spite of many simplifying assumptions, namely omitting the site effects

Cerveny, Vlastislav

247

Advanced RF power sources for linacs  

SciTech Connect (OSTI)

In order to maintain a reasonable over-all length at high center-of-mass energy, the main linac of an electron-positron linear collider must operate at a high accelerating gradient. For copper (non-superconducting) accelerator structures, this implies a high peak power per unit length and a high peak power per RF source, assuming a limited number of discrete sources are used. To provide this power, a number of devices are currently under active development or conceptual consideration: conventional klystrons with multi-cavity output structures, gyroklystrons, magnicons, sheet-beam klystrons, multiple-beam klystrons and amplifiers based on the FEL principle. To enhance the peak power produced by an rf source, the SLED rf pulse compression scheme is currently in use on existing linacs, and new compression methods that produce a flatter output pulse are being considered for future linear colliders. This paper covers the present status and future outlook for the more important rf power sources and pulse compression systems. It should be noted that high gradient electron linacs have applications in addition to high-energy linear colliders; they can, for example, serve as compact injectors for FEL`s and storage rings.

Wilson, P.B.

1996-10-01T23:59:59.000Z

248

groundwater nitrogen source identification and remediation  

E-Print Network [OSTI]

producer profits. This will, in turn, benefit water bodies in the area that receive stream baseflow fromgroundwater nitrogen source identification and remediation The Seymour Aquifer is a shallow aquifer water withdraws are used for irrigation while the cities of Vernon, Burk- burnett and Electra and many

249

Radiation Sources External Beam and Isotopes  

E-Print Network [OSTI]

Radiation Sources External Beam and Isotopes J. Daniel Bourland, PhD Professor Department of Radiation Oncology Departments of Physics and Biomedical Engineering Wake Forest School of Medicine Winston Radiation · Photons: electromagnetic radiation, no mass, E = h · X rays: origins are from atomic energy

250

Coordinating and Motivating open source contributors  

E-Print Network [OSTI]

Coordinating and Motivating open source contributors Workshop @ LinuxWorldAsia James Howison School Science at University of New South Wales 4th year of my PhD at Syracuse University Prof. Crowston Interviews, surveys and studies of development archives ApacheCon, O'Reilly OSCon, FOOCamp, OSDC

Crowston, Kevin

251

Energy Sources Used for Fusion Welding  

E-Print Network [OSTI]

) Energy Sources Used for Fusion Welding Thomas W. Eagar, Massachusetts Institute of Technology WELDING AND JOINING processes are es- sential for the development of virtually every manufactured product this situation. First, welding and joining are multifaceted, both in terms of process variations (such as fas

Eagar, Thomas W.

252

Arnold Schwarzenegger DATA SOURCES FOR CLIMATE CHANGE  

E-Print Network [OSTI]

Arnold Schwarzenegger Governor DATA SOURCES FOR CLIMATE CHANGE RESEARCH WITH A COMPUTABLE GENERAL-Holst, University of California, Berkeley PIERPROJECTREPORT June 2007 CEC-500-2006-080 #12;California Climate Change for Climate Change Research with a Computable General Equilibrium (CGE) Model of the California Economy

253

Source: University of California -San Diego  

E-Print Network [OSTI]

Source: University of California - San Diego Date: January 8, 2007 More on: , , , , , Brain Injury Brain Tumor Heart Disease Nervous System Neuroscience Psychology Research Bottleneck In Blood Supply Makes Brain Vulnerable To Strokes A team of UC San Diego physicists and neuroscientists has discovered

Kleinfeld, David

254

Hydrologically Sensitive Areas: Variable Source Area Hydrology  

E-Print Network [OSTI]

Hydrologically Sensitive Areas: Variable Source Area Hydrology Implications for Water Quality Risk hydrology was developed and applied to the New York City (NYC) water supply watersheds. According and are therefore hydrologically sensitive with respect to their potential to transport contaminants to perennial

Walter, M.Todd

255

A polarized positron source for CEBAF  

E-Print Network [OSTI]

A compact polarized positron source for Jefferson Lab is discussed. This scheme relies upon a high polarization (85%), high current (1 mA), low-energy (CEBAF-like injector with positron polarization ~60% and nano-Ampere intensity. An experiment to test this scheme is outlined.

Dumas, J; Voutier, E

2009-01-01T23:59:59.000Z

256

Self-Sustaining Open Source Software  

E-Print Network [OSTI]

Self-Sustaining Open Source Software Development Peter Gutmann University of Auckland Dot-coms Spare-time project · Sourceforge: Graveyard of abandonware/gedanken projects Self-sustaining = self-sustaining · MySQL, Berkeley DB, OpenBSD C = abandonware, splintered into factions, gedanken

Gutmann, Peter

257

Light Sources on the Nylon Vessels' Surfaces  

E-Print Network [OSTI]

the buffer thickness between the vessels could enhance -ray background in the corresponding region inside;Chapter 7: Light Sources on the Nylon Vessels' Surfaces 185 or laser). The illuminated spots can be seen the fiber's end to penetrate through the vessel membrane into the scintillator volume. A laser of a specific

258

Windows Enterprise Design Master Directory Sources  

E-Print Network [OSTI]

Windows Enterprise Design Master Directory Sources April 2, 2014 Active Directory information be to use a Microsoft "Outlook" email client to query Active Directory for someone with a certain "last name in Windows Active Directory. It is important the information correctly reflects your current name

Mayfield, John

259

Brookhaven National Laboratory National Synchrotron Light Source  

E-Print Network [OSTI]

Brookhaven National Laboratory National Synchrotron Light Source Number: Revision: LS-ESH-0027 06 copy of this file is the one on-line in the NSLS ESH website. Before using a printed copy, verify that it is the most current version by checking the document issue date on the NSLS ESH website. BROOKHAVEN NATIONAL

Ohta, Shigemi

260

Science and Technology of Future Light Sources  

E-Print Network [OSTI]

Science and Technology of Future Light Sources A White Paper Report prepared by scientists from ANL Berkeley, CA 94720 SLAC National Accelerator Laboratory 2575 Sand Hill Road Menlo Park, CA 94025 Editors. This work was supported by the Director, Office of Science, Office of Basic Energy Sciences, of the U

Knowles, David William

Note: This page contains sample records for the topic "addressee source pm-o" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Secondary electron ion source neutron generator  

DOE Patents [OSTI]

A neutron generator employing an electron emitter, an ion source bombarded by the electrons from the electron emitter, a plasma containment zone, and a target situated between the plasma containment zone and the electron emitter is disclosed. The target contains occluded deuterium, tritium, or a mixture thereof. 4 figs.

Brainard, J.P.; McCollister, D.R.

1998-04-28T23:59:59.000Z

262

NRC Construction Light Source Flicker: What We  

E-Print Network [OSTI]

NRC Construction Light Source Flicker: What We Need to Know, and Why You Should Care NRC Construction Jennifer A. Veitch, Ph.D. (c) 2013, National Research Council Canada #12;NRC Construction Handbook: Reference & Application (9th Ed.), 2000, p. 3-20 #12;NRC Construction Flicker Effects 1

California at Davis, University of

263

Secondary electron ion source neutron generator  

DOE Patents [OSTI]

A neutron generator employing an electron emitter, an ion source bombarded by the electrons from the electron emitter, a plasma containment zone, and a target situated between the plasma containment zone and the electron emitter. The target contains occluded deuterium, tritium, or a mixture thereof

Brainard, John P. (Albuquerque, NM); McCollister, Daryl R. (Albuquerque, NM)

1998-01-01T23:59:59.000Z

264

2, 12871315, 2002 Aerosol sources and  

E-Print Network [OSTI]

in climate variability and climate change studies (IPCC, 2001). Radiative forcing of natural and their contribution to the chemical composition of aerosols in the Eastern Mediterranean Sea during summertime J aerosol sources in the Eastern Mediterranean5 Basin could be investigated at this location since the site

Paris-Sud XI, Université de

265

Catalog of supersoft X-ray sources  

E-Print Network [OSTI]

This catalog comprises an up-to-date (December 1999) list of luminous (>10^36 erg/s), binary supersoft X-ray sources. This electronic version (including the accompannying Web-pages) supersedes the printed version of Greiner (1996).

J. Greiner

2000-05-11T23:59:59.000Z

266

Open Source Software: Management, Diffusion and Competition  

E-Print Network [OSTI]

and competitive environment such as the ICT market. 1 Introduction OSS is an alternative model of software has introduced an innovative model of software development, based on self-organized communitiesOpen Source Software: Management, Diffusion and Competition Spyridoula Lakkaé National

Kouroupetroglou, Georgios

267

Undergraduate Internship Funding Sources Summer 2012  

E-Print Network [OSTI]

Undergraduate Internship Funding Sources Summer 2012 Sorensen Fellowship Eli Segal Citizen Foundation Internship Grant Internship focus Issues of ethics, broadly defined Civic engagement placements weeks/ full-time Summer ­ no minimum 8 weeks/ 8 weeks/ 200 hrs 200 hrs 200 hrs Unpaid internship? Yes

Snider, Barry B.

268

ORIGINAL ARTICLE Pneumatic Energy Sources for Autonomous  

E-Print Network [OSTI]

research projects using combustion (methane and butane) and monopropellant decomposition (hydrogen per extensive system-level development. Hydrogen peroxide decomposition requires not only few additional parts mobile robotics grows, the most common energy source remains a tether to a sta- tionary compressor. While

Wood, Robert

269

Electric germs Source: scenta Rate this item  

E-Print Network [OSTI]

Electric germs Source: scenta Rate this item People in remote areas could benefit from fuel cells that contain bacteria that grows prolifically on the graphite anodes of fuel cells and can conduct electricity that isolating a bacterium generated pow er in fuel cells efficiently. Geobacter sulfurreducens is bacteria

Lovley, Derek

270

High power THz sources for nonlinear imaging  

SciTech Connect (OSTI)

Many biological and chemical compounds have unique absorption features in the THz (0.1 - 10 THz) region, making the use of THz waves attractive for imaging in defense, security, biomedical imaging, and monitoring of industrial processes. Unlike optical radiation, THz frequencies can pass through many substances such as paper, clothing, ceramic, etc. with little attenuation. The use of currently available THz systems is limited by lack of highpower, sources as well as sensitive detectors and detector arrays operating at room temperature. Here we present a novel, high power THz source based on intracavity downconverison of optical pulses. The source delivers 6 ps pulses at 1.5 THz, with an average power of >300 ?W and peak powers >450 mW. We propose an imaging method based on frequency upconverison that is ideally suited to use the narrow bandwidth and high peak powers produced by the source. By upconverting the THz image to the infrared, commercially available detectors can be used for real time imaging.

Tekavec, Patrick F.; Kozlov, Vladimir G. [Microtech Instruments, 858 West Park Street, Eugene, OR 97401 (United States)

2014-02-18T23:59:59.000Z

271

Absolute Time Radiometric Dating: the source  

E-Print Network [OSTI]

Absolute Time Radiometric Dating: the source of the dates on the Geologic Time Scale #12 as an element changes to another element, e.g. uranium to lead. · The parent element is radioactive · Carbon-14, C14 Nitrogen-14, N14 · Uranium-235, U235 Lead-207, Pb207 · Potassium-40, K40 Argon-40, Ar40

Kammer, Thomas

272

Brookhaven National Laboratory National Synchrotron Light Source  

E-Print Network [OSTI]

Brookhaven National Laboratory National Synchrotron Light Source Number: Revision: LS-ESH-0026 4 (ANSI) Hazard Class 3B and 4 laser systems must be documented, reviewed, and approved through use) CrystaLaser Compact Solid State Laser (Class 3B) Location: All four lasers are located in the U2A

Ohta, Shigemi

273

Development of a hydraulic borehole seismic source  

SciTech Connect (OSTI)

This report describes a 5 year, $10 million Sandia/Industry project to develop an advanced borehole seismic source for use in oil and gas exploration and production. The development Team included Sandia, Chevron, Amoco, Conoco, Exxon, Raytheon, Pelton, and GRI. The seismic source that was developed is a vertically oriented, axial point force, swept frequency, clamped, reaction-mass vibrator design. It was based on an early Chevron prototype, but the new tool incorporates a number of improvements which make it far superior to the original prototype. The system consists of surface control electronics, a special heavy duty fiber optic wireline and draw works, a cablehead, hydraulic motor/pump module, electronics module, clamp, and axial vibrator module. The tool has a peak output of 7,000 lbs force and a useful frequency range of 5 to 800 Hz. It can operate in fluid filled wells with 5.5-inch or larger casing to depths of 20,000 ft and operating temperatures of 170 C. The tool includes fiber optic telemetry, force and phase control, provisions to add seismic receiver arrays below the source for single well imaging, and provisions for adding other vibrator modules to the tool in the future. The project yielded four important deliverables: a complete advanced borehole seismic source system with all associated field equipment; field demonstration surveys funded by industry showing the utility of the system; industrial sources for all of the hardware; and a new service company set up by their industrial partner to provide commercial surveys.

Cutler, R.P.

1998-04-01T23:59:59.000Z

274

10 years and 20,000 sources: the offsite source recovery project  

SciTech Connect (OSTI)

The Global Threat Reduction Initiative's (GTRI) Offsite Source Recovery Project (OSRP) has been recovering excess and unwanted sealed sources for ten years. In January 2009, GTRI announced that the project had recovered 20,000 sealed radioactive sources. This project grew out of early efforts at Los Alamos National Laboratory (LANL) to recover and disposition excess Plutonium-239 (Pu-239) sealed sources that were distributed in the 1960s and 1970s under the Atoms for Peace Program. Sealed source recovery was initially considered a waste management activity, as evidenced by its initial organization under the Department of Energy's (DOE's) Environmental Management (EM) program. After the terrorist attacks of 2001, however, the interagency community began to recognize the threat posed by excess and unwanted radiological material, particularly those that could not be disposed at the end of their useful life. After being transferred to the National Nuclear Security Administration (NNSA) to be part of GTRI, OSRP's mission was expanded to include not only material that would be classified as Greater-than-Class-C (GTCC) when it became waste, but also any other materials that might be a 'national security consideration.' This paper discusses OSRP's history, recovery operations, expansion to accept high-activity beta-gamma-emitting sealed sources and devices and foreign-possessed sources, and more recent efforts such as cooperative projects with the Council on Radiation Control Program Directors (CRCPD) and involvement in GTRI's Search and Secure project. Current challenges and future work will also be discussed.

Whitworth, Julia R [Los Alamos National Laboratory; Abeyta, Cristy L [Los Alamos National Laboratory; Pearson, Michael W [Los Alamos National Laboratory

2009-01-01T23:59:59.000Z

275

Milagro Observations of TeV Emission from Galactic Sources in the Fermi Bright Source List  

E-Print Network [OSTI]

We present the result of a search of Milagro sky map for spatial correlations with sources from a subset of the recent Fermi Bright Source List (BSL). The BSL consists of the 205 most significant sources detected above 100 MeV by the Fermi Large Area Telescope. We select sources based on their categorization in the BSL, taking all confirmed or possible Galactic sources in the field of view of Milagro. Of the 34 Fermi sources selected, 14 are observed by Milagro at a significance of 3 standard deviations or more. We conduct this search with a new analysis which employs newly-optimized gamma-hadron separation and utilizes the full 8-year Milagro dataset. Milagro is sensitive to gamma rays above 1 TeV and these results extend the observation of these sources far above the Fermi energy band. With the new analysis and additional data, TeV emission is definitively observed associated with the Fermi pulsar J2229.0+6114, in the the Boomerang Pulsar Wind Nebula (PWN). Furthermore, an extended region of TeV emission is...

Abdo, A A; Aune, T; Berley, D; Chen, C; Christopher, G E; DeYoung, T; Dingus, B L; Ellsworth, R W; GonzŠlez, M M; Goodman, J A; Hays, E; Hoffman, C M; Huentemeyer, P H; Kolterman, B E; Linnemann, J T; McEnery, J E; Morgan, T; Mincer, A I; Nťmethy, P; Pretz, J; Ryan, J M; Parkinson, P M Saz; Shoup, A; Sinnis, G; Smith, A J; Vasileiou, V; Walker, G P; Williams, D A; Yodh, G B

2009-01-01T23:59:59.000Z

276

BWR Source Term Generation and Evaluation  

SciTech Connect (OSTI)

This calculation is a revision of a previous calculation (Ref. 7.5) that bears the same title and has the document identifier BBAC00000-01717-0210-00006 REV 01. The purpose of this revision is to remove TBV (to-be-verified) -41 10 associated with the output files of the previous version (Ref. 7.30). The purpose of this and the previous calculation is to generate source terms for a representative boiling water reactor (BWR) spent nuclear fuel (SNF) assembly for the first one million years after the SNF is discharged from the reactors. This calculation includes an examination of several ways to represent BWR assemblies and operating conditions in SAS2H in order to quantify the effects these representations may have on source terms. These source terms provide information characterizing the neutron and gamma spectra in particles per second, the decay heat in watts, and radionuclide inventories in curies. Source terms are generated for a range of burnups and enrichments (see Table 2) that are representative of the waste stream and stainless steel (SS) clad assemblies. During this revision, it was determined that the burnups used for the computer runs of the previous revision were actually about 1.7% less than the stated, or nominal, burnups. See Section 6.6 for a discussion of how to account for this effect before using any source terms from this calculation. The source term due to the activation of corrosion products deposited on the surfaces of the assembly from the coolant is also calculated. The results of this calculation support many areas of the Monitored Geologic Repository (MGR), which include thermal evaluation, radiation dose determination, radiological safety analyses, surface and subsurface facility designs, and total system performance assessment. This includes MGR items classified as Quality Level 1, for example, the Uncanistered Spent Nuclear Fuel Disposal Container (Ref. 7.27, page 7). Therefore, this calculation is subject to the requirements of the Quality Assurance Requirements and Description (Ref. 7.28). The performance of the calculation and development of this document are carried out in accordance with AP-3.124, ''Design Calculation and Analyses'' (Ref. 7.29).

J.C. Ryman

2003-07-31T23:59:59.000Z

277

Exploring the faint source population at 15.7 GHz  

E-Print Network [OSTI]

-expanding Euclidean Universe populated with non-evolving sources with number density n and luminosity L contains N = 4pind3/3 sources out to distance d. As the flux density (S) of each source is given by S = L/4pid2, the number of sources brighter than flux density...

Whittam, Imogen Helen

2014-10-07T23:59:59.000Z

278

Gravity-Capillary Lumps Generated by a Moving Pressure Source  

E-Print Network [OSTI]

The nonlinear wave pattern generated by a localized pressure source moving over a liquid free surface

Diorio, James

279

The IAEA and Control of Radioactive SourcesThe  

SciTech Connect (OSTI)

This presentation discusses the International Atomic Energy Agency (IAEA) and the control of radioactive sources.

Dodd, B.

2004-10-03T23:59:59.000Z

280

Keynote Address National Seminar on Alternative Energy Sources  

E-Print Network [OSTI]

Keynote Address National Seminar on Alternative Energy Sources Prof. Rangan Banerjee Energy Systems that there is a real need for alternative energy sources. What do we understand by Alternative Energy Sources? In order Consumption 1997-98 Keynote address at Two days National Seminar on Alternative Energy Sources, 27-28 Aug

Banerjee, Rangan

Note: This page contains sample records for the topic "addressee source pm-o" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

An Accelerator Neutron Source for BNCT  

SciTech Connect (OSTI)

The overall goal of this project was to develop an accelerator-based neutron source (ABNS) for Boron Neutron Capture Therapy (BNCT). Specifically, our goals were to design, and confirm by measurement, a target assembly and a moderator assembly that would fulfill the design requirements of the ABNS. These design requirements were 1) that the neutron field quality be as good as the neutron field quality for the reactor-based neutron sources for BNCT, 2) that the patient treatment time be reasonable, 3) that the proton current required to treat patients in reasonable times be technologially achievable at reasonable cost with good reliability, and accelerator space requirements which can be met in a hospital, and finally 4) that the treatment be safe for the patients.

Blue, Thomas, E

2006-03-14T23:59:59.000Z

282

Assessment of emerging energy sources. Summary report  

SciTech Connect (OSTI)

This report summarizes the results of a broad review and analysis of the commercialization potential for eight emerging sources of energy: tight gas sands; heavy oil; methane from geopressured aquifers; oil shale; enhanced oil recovery; advanced coal mining technologies; and underground coal gasification. Each source of energy or technology was evaluated with respect to six factors affecting commercialization: size and characteristics of resource; technical and economic performance; relevant energy market growth rates; logistical considerations; development lead times; and regulatory and institutional factors. The evaluation was based on a review of existing literature, extensive interviews with industry experts and Booz-Allen and Hamilton's overall assessment of the degree to which these factors would constrain commercial development. In addition estimates were made of supply potential from each emerging energy. This report summarizes Booz Allen's findings with respect to these factors.

Not Available

1981-09-01T23:59:59.000Z

283

Monte Carlo stratified source-sampling  

SciTech Connect (OSTI)

In 1995, at a conference on criticality safety, a special session was devoted to the Monte Carlo {open_quotes}eigenvalue of the world{close_quotes} problem. Argonne presented a paper, at that session, in which the anomalies originally observed in that problem were reproduced in a much simplified model-problem configuration, and removed by a version of stratified source-sampling. The original test-problem was treated by a special code designed specifically for that purpose. Recently ANL started work on a method for dealing with more realistic eigenvalue of the world configurations, and has been incorporating this method into VIM. The original method has been modified to take into account real-world statistical noise sources not included in the model problem. This paper constitutes a status report on work still in progress.

Blomquist, R.N.; Gelbard, E.M.

1997-09-01T23:59:59.000Z

284

Microwave generated plasma light source apparatus  

SciTech Connect (OSTI)

A microwave generated plasma light source including a microwave generator, a microwave cavity having a light reflecting member forming at least a portion of the cavity, and a member transparent to light and opaque to microwaves disposed across an opening of the cavity opposite the feeding opening through which the microwave generator is coupled. An electrodeless discharge bulb is disposed at a position in the cavity such that the cavity operates as a resonant cavity at least when the bulb is emitting light. In the bulb is encapsulated at least one discharge light emissive substance. The bulb has a shape and is sufficiently small that the bulb acts substantially as a point light source.

Yoshizawa, K.; Ito, H.; Kodama, H.; Komura, H.; Minowa, Y.

1985-02-05T23:59:59.000Z

285

Optimal Power Allocation for Renewable Energy Source  

E-Print Network [OSTI]

Battery powered transmitters face energy constraint, replenishing their energy by a renewable energy source (like solar or wind power) can lead to longer lifetime. We consider here the problem of finding the optimal power allocation under random channel conditions for a wireless transmitter, such that rate of information transfer is maximized. Here a rechargeable battery, which is periodically charged by renewable source, is used to power the transmitter. All of above is formulated as a Markov Decision Process. Structural properties like the monotonicity of the optimal value and policy derived in this paper will be of vital importance in understanding the kind of algorithms and approximations needed in real-life scenarios. The effect of curse of dimensionality which is prevalent in Dynamic programming problems can thus be reduced. We show our results under the most general of assumptions.

Sinha, Abhinav

2011-01-01T23:59:59.000Z

286

Infrared light sources with semimetal electron injection  

DOE Patents [OSTI]

An infrared light source is disclosed that comprises a layered semiconductor active region having a semimetal region and at least one quantum-well layer. The semimetal region, formed at an interface between a GaAsSb or GalnSb layer and an InAsSb layer, provides electrons and holes to the quantum-well layer to generate infrared light at a predetermined wavelength in the range of 2-6 .mu.m. Embodiments of the invention can be formed as electrically-activated light-emitting diodes (LEDs) or lasers, and as optically-pumped lasers. Since the active region is unipolar, multiple active regions can be stacked to form a broadband or multiple-wavelength infrared light source.

Kurtz, Steven R. (Albuquerque, NM); Biefeld, Robert M. (Albuquerque, NM); Allerman, Andrew A. (Albuquerque, NM)

1999-01-01T23:59:59.000Z

287

Cationically polymerizable monomers derived from renewable sources  

SciTech Connect (OSTI)

The objective of this project is to make use of products obtained from renewable plant sources as monomers for the direct production of polymers which can be used for a wide range of plastic applications. In this report is described progress in the synthesis and polymerization of cationically polymerizable monomers and oligomers derived from botanical oils, terpenes, natural rubber, and lignin. Nine different botanical oils were obtained from various sources, characterized and then epoxidized. Their photopolymerization was carried out using cationic photoinitiators and the mechanical properties of the resulting polymers characterized. Preliminary biodegradation studies are being conducted on the photopolymerized films from several of these oils. Limonene was cationically polymerized to give dimers and the dimers epoxidized to yield highly reactive monomers suitable for coatings, inks and adhesives. The direct phase transfer epoxidation of squalene and natural rubber was carried out. The modified rubbers undergo facile photocrosslinking in the presence of onium salts to give crosslinked elastomers. 12 refs., 3 figs., 10 tabs.

Crivello, J.V.

1991-10-01T23:59:59.000Z

288

Extreme-UV electrical discharge source  

DOE Patents [OSTI]

An extreme ultraviolet and soft x-ray radiation electric capillary discharge source that includes a boron nitride housing defining a capillary bore that is positioned between two electrodes one of which is connected to a source of electric potential can generate a high EUV and soft x-ray radiation flux from the capillary bore outlet with minimal debris. The electrode that is positioned adjacent the capillary bore outlet is typically grounded. Pyrolytic boron nitride, highly oriented pyrolytic boron nitride, and cubic boron nitride are particularly suited. The boron nitride capillary bore can be configured as an insert that is encased in an exterior housing that is constructed of a thermally conductive material. Positioning the ground electrode sufficiently close to the capillary bore outlet also reduces bore erosion.

Fornaciari, Neal R. (Tracey, CA); Nygren, Richard E. (Los Ranchos de Albuquerque, NM); Ulrickson, Michael A. (Albuquerque, NM)

2002-01-01T23:59:59.000Z

289

MCNP6 Cosmic-Source Option  

SciTech Connect (OSTI)

MCNP is a Monte Carlo radiation transport code that has been under development for over half a century. Over the last decade, the development team of a high-energy offshoot of MCNP, called MCNPX, has implemented several physics and algorithm improvements important for modeling galactic cosmic-ray (GCR) interactions with matter. In this presentation, we discuss the latest of these improvements, a new Cosmic-Source option, that has been implemented in MCNP6.

McKinney, Gregg W [Los Alamos National Laboratory; Armstrong, Hirotatsu [Los Alamos National Laboratory; James, Michael R [Los Alamos National Laboratory; Clem, John [University of Delaware, BRI; Goldhagen, Paul [DHS, National Urban Security Technology Laboratory

2012-06-19T23:59:59.000Z

290

Pulsed source ion implantation apparatus and method  

DOE Patents [OSTI]

A new pulsed plasma-immersion ion-implantation apparatus that implants ions in large irregularly shaped objects to controllable depth without overheating the target, minimizing voltage breakdown, and using a constant electrical bias applied to the target. Instead of pulsing the voltage applied to the target, the plasma source, for example a tungsten filament or a RF antenna, is pulsed. Both electrically conducting and insulating targets can be implanted.

Leung, Ka-Ngo (Hercules, CA)

1996-01-01T23:59:59.000Z

291

Good Sources of Nutrients: Vitamin A  

E-Print Network [OSTI]

: Eggs? Fish? Poultry? Ask a physician, registered dietitian or pharmacist whether you should take a dietary supplement such as a multivitamin pill. Sources 1. U.S. Department of Agriculture. MyPyramid. www.MyPyramid.gov 2. USDA. Dietary... Guidelines for Americans, 2005. www.healthierus.gov/dietaryguidelines 3. National Institutes of Health. Office of Dietary Sup- plements. http://dietary-supplements.info.nih.gov/ factsheets/vitamina.asp Grupo de frutas Frutas de color amarillo y naranja...

Scott, Amanda; Replogle, Jacqueline

2008-08-28T23:59:59.000Z

292

New Sources of Gravitational Waves During Inflation  

SciTech Connect (OSTI)

We point out that detectable inflationary tensor modes can be generated by particle or string sources produced during inflation, consistently with the requirements for inflation and constraints from scalar fluctuations. We show via examples that this effect can dominate over the contribution from quantum fluctuations of the metric, occurring even when the inflationary potential energy is too low to produce a comparable signal. Thus a detection of tensor modes from inflation does not automatically constitute a determination of the inflationary Hubble scale.

Senatore, Leonardo; Silverstein, Eva; /Stanford U., Phys. Dept. /SLAC; Zaldarriaga, Matias; /Princeton, Inst. Advanced Study

2012-02-15T23:59:59.000Z

293

Studies of atomic hydrogen beam sources  

E-Print Network [OSTI]

Discharge tube & cavity connection to vacuum system. . 10 4 Discharge source system 12 5 Preliminary detection vacuum system 14 6 Penning trap system 16 7 Spectra taken with the bulb discharge tube on the Penning ion trap sys- tem . . 22 6 Spectra... magnetic field with cylin- drical symmetry of order 2n (n = 2, 3, 4, . . . ) results in spin and velocity dependent focussing of the atomic beam. A small permanent hexapole magnet used to focus one spin state of atomic hydrogen while defocussing...

Schafer, Todd William

1989-01-01T23:59:59.000Z

294

Water on Earth Source % of Supply  

E-Print Network [OSTI]

1 Water on Earth Source % of Supply Oceans 97.08 Ice Sheets and Glaciers 1.99 Ground Water 0.62 Atmosphere 0.29 Lakes (Fresh) 0.01 Inland Seas / Salt Water Lakes 0.005 Soil Moisture 0.004 Rivers 0.001 Water · Water is the solvent, the medium and the participant in most of the chemical reactions occurring

Cochran-Stafira, D. Liane

295

Modeling Dynamic Landscapes in Open Source GIS  

E-Print Network [OSTI]

is free online ē message board discussion, help ē Google sites: post HW, get feedback ē register to get credit Solar radiation modeling: monthly totals Applications in urban areas: solar panels, building design, thermal conditions,Ö Helena Mitasova, NCSU... that is free to run, study, modify and distribute Free means freedom: free is a matter of liberty not price It can be commercial (Red Hat Linux) but not proprietary OSGeo foundation supports the development of open source geospatial software and promotes its...

Mitasova, Helena

2013-11-20T23:59:59.000Z

296

Preparing a public database of radio sources  

E-Print Network [OSTI]

We have collected the largest existing set of radio source lists in machine-readable form: 320 tables with 1.75 million records. Only a minor fraction of these is accessible via public databases. We describe our plans to make this huge amount of heterogeneous data accessible in a homogeneous way via the World Wide Web, with reliable cross-identifications, and searchable by various observables.

H. Andernach; S. A. Trushkin; A. G. Gubanov; O. V. Verkhodanov; V. B. Titov; A. Micol

1996-07-22T23:59:59.000Z

297

Probing SZ Source Detection with Gasdynamical Simulations  

E-Print Network [OSTI]

The huge worldwide investment in CMB experiments should make the Sunyaev-Zeldovich (SZ) effect a key probe of the cosmic web in the near future. For the promise to be realized, substantial development of simulation and analysis tools to relate observation to theory is needed. The high nonlinearity and dissipative/feedback gas physics lead to highly non-Gaussian patterns that are much more difficult to analyze than Gaussian primary anisotropies for which the procedures are reasonably well developed. Historical forecasts for what CMB experiments might see used semi-analytic tools, including large scale map constructions, with localized and simplified pressure structures distributed on a point process of (clustered) sources. Hydro studies beyond individual cluster/supercluster systems were inadequate, but now large-volume simulations with high resolution are beginning to shift the balance. We illustrate this by applying ``Gasoline'' (parallelized Tree+SPH) computations to construct SZ maps and derive statistical measures. We believe rapid Monte Carlo simulations using parameterized templates centered on point processes informed by optical and other means on the observational side, and by hydro simulations on the theory side, should play an important role in pipelines to analyze the new SZ field data. We show that localized sources should dominate upcoming SZ experiments, identify sources in the maps under filtering and noise levels expected for these experiments, use the RCS photometric optical survey as an example of redshift localization, and discuss whether cosmic web patterns such as superclusters can be enhanced when such extra source information is supplied.

J. Richard Bond; Marcelo I. Ruetalo; James W. Wadsley; Michael D. Gladders

2002-05-30T23:59:59.000Z

298

Ground Source Heat Pump System Data Analysis  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-UpHeatMulti-Dimensional Subject:Ground Source Heat Pump Subprogram Overview Ground

299

GEO SOURCE ONE, Inc | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy Resources Jump to: navigation, search Equivalent URIFrontier,Jump to:Wilmette, Jump to:SOURCE ONE, Inc

300

Pulsed source ion implantation apparatus and method  

DOE Patents [OSTI]

A new pulsed plasma-immersion ion-implantation apparatus that implants ions in large irregularly shaped objects to controllable depth without overheating the target, minimizing voltage breakdown, and using a constant electrical bias applied to the target. Instead of pulsing the voltage applied to the target, the plasma source, for example a tungsten filament or a RF antenna, is pulsed. Both electrically conducting and insulating targets can be implanted. 16 figs.

Leung, K.N.

1996-09-24T23:59:59.000Z

Note: This page contains sample records for the topic "addressee source pm-o" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Open Source Architecture: An Exploration of Source Code and Access in Architectural Design  

E-Print Network [OSTI]

The term open source is increasingly applied to architecture, yet there is little consensus about what it means in this context. This paper explores how different literal and metaphoric interpretations of the ďaccess to ...

Vardouli, Theodora

302

Source fabrication and lifetime for L+ ion beams extracted from alumino-silicate sources  

E-Print Network [OSTI]

of sintered alumino-silicate was about 0.25 mm, but not keptthe mass of alumino-silicate. This dis- crepancy suggestedextracted from alumino-silicate sources Prabir K. Roy, ?

Greenway, W.G.

2012-01-01T23:59:59.000Z

303

Source fabrication and lifetime for Li+ ion beams extracted from alumino-silicate sources  

E-Print Network [OSTI]

of amount of lithium alumino-silicate mass deposition on Themg, and 2.8 mg of alumino- silicate material deposited. [19]extracted from alumino-silicate sources Prabir K. Roy, ?

Roy, Prabir

2013-01-01T23:59:59.000Z

304

Extended emission around GPS radio sources  

E-Print Network [OSTI]

Extended radio emission detected around a sample of GHz Peaked Spectrum (GPS) radio sources is discussed. Evidence for extended emission which is related to the GPS source is found in 6 objects out of 33. Three objects are associated with quasars with core-jet pc-scale morphology, and three are identified with galaxies with symmetric (CSO) radio morphology. We conclude that the core-jet GPS quasars are likely to be beamed objects with a continuous supply of energy from the core to the kpc scale. It is also possible that low surface brightness extended radio emission is present in other GPS quasars but the emission is below our detection limit due to the high redshifts of the objects. On the other hand, the CSO/galaxies with extended large scale emission may be rejuvenated sources where the extended emission is the relic of previous activity. In general, the presence of large scale emission associated with GPS galaxies is uncommon, suggesting that in the context of the recurrent activity model, the time scale between subsequent bursts is in general longer than the radiative lifetime of the radio emission from the earlier activity.

C. Stanghellini; C. P. O'Dea; D. Dallacasa; P. Cassaro; S. A. Baum; R. Fanti; C. Fanti

2005-07-21T23:59:59.000Z

305

Positron source position sensing detector and electronics  

DOE Patents [OSTI]

A positron source, position sensing device, particularly with medical applications, in which positron induced gamma radiation is detected using a ring of stacked, individual scintillation crystals, a plurality of photodetectors, separated from the scintillation crystals by a light guide, and high resolution position interpolation electronics. Preferably the scintillation crystals are several times more numerous than the photodetectors with each crystal being responsible for a single scintillation event from a received gamma ray. The light guide will disperse the light emitted from gamma ray absorption over several photodetectors. Processing electronics for the output of the photodetectors resolves the location of the scintillation event to a fraction of the dimension of each photodetector. Because each positron absorption results in two 180.degree. oppositely traveling gamma rays, the detection of scintillation in pairs permits location of the positron source in a manner useful for diagnostic purposes. The processing electronics simultaneously responds to the outputs of the photodetectors to locate the scintillations to the source crystal. While it is preferable that the scintillation crystal include a plurality of stacked crystal elements, the resolving power of the processing electronics is also applicable to continuous crystal scintillators.

Burnham, Charles A. (South Essex, MA); Bradshaw, Jr., John F. (Winthrop, MA); Kaufman, David E. (Brockton, MA); Chesler, David A. (Newton Highlands, MA); Brownell, Gordon L. (Cambridge, MA)

1985-01-01T23:59:59.000Z

306

Tunable pulsed narrow bandwidth light source  

DOE Patents [OSTI]

A tunable pulsed narrow bandwidth light source and a method of operating a light source are provided. The light source includes a pump laser, first and second non-linear optical crystals, a tunable filter, and light pulse directing optics. The method includes the steps of operating the pump laser to generate a pulsed pump beam characterized by a nanosecond pulse duration and arranging the light pulse directing optics so as to (i) split the pulsed pump beam into primary and secondary pump beams; (ii) direct the primary pump beam through an input face of the first non-linear optical crystal such that a primary output beam exits from an output face of the first non-linear optical crystal; (iii) direct the primary output beam through the tunable filter to generate a sculpted seed beam; and direct the sculpted seed beam and the secondary pump beam through an input face of the second non-linear optical crystal such that a secondary output beam characterized by at least one spectral bandwidth on the order of about 0.1 cm.sup.-1 and below exits from an output face of the second non-linear optical crystal.

Powers, Peter E. (Dayton, OH); Kulp, Thomas J. (Livermore, CA)

2002-01-01T23:59:59.000Z

307

Feedback from Clustered Sources During Reionization  

E-Print Network [OSTI]

The reionization history of the intergalactic medium (IGM) at high redshift (z > 6) was likely strongly shaped by several global feedback processes. Because the earliest ionizing sources formed at the locations of the rare density peaks, their spatial distribution was strongly clustered. Here we demonstrate that this clustering significantly boosts the impact of feedback processes operating at high redshift. We build a semi-analytical model to include feedback and clustering simultaneously, and apply this model to the suppression of star-formation in minihalos due to photoionization. The model is built on the excursion-set-based formalism of Furlanetto, Zaldarriaga and Hernquist (2004), which incorporates the clustering of ionizing sources, and which we here extend to include suppression of star formation in minihalos. We find that clustering increases the mean HII bubble size by a factor of several, and it dramatically increases the fraction of minihalos that are suppressed, by a factor of up to 60 relative to a randomly distributed population. This enhanced suppression can significantly reduce the electron scattering optical depth, as required by the three-year data from the Wilkinson Microwave Anisotropy Probe (WMAP). We argue that source clustering is likely to similarly boost the importance of a variety of other feedback mechanisms.

Roban Hultman Kramer; Zoltan Haiman; S. Peng Oh

2006-04-10T23:59:59.000Z

308

Hybrid Aerocapacitor{trademark}-battery power sources  

SciTech Connect (OSTI)

PolyStor, Power-One, LLNL and Aerojet are participants in a Technology Reinvestment Program contract supported by the Advanced Research Project Agency for developing carbon aerogel-based Electrolytic Double Layer Capacitors (Aerocapacitors). This paper reports some recent results for organic-electrolyte Aerocapacitors developed under this contract and initial results on their use in electrolytic double layer capacitor (EDLC)-battery power sources. EDLC-battery hybrid power sources offer the potential for increased discharge time, improved low temperature performance and longer cycle life vis-a-vis batteries in pulse discharge applications. The authors previously presented performance results for AA Aerocapacitors but this is the first report of their work on hybrid power sources. Prototype organic-electrolyte Aerocapacitors exhibit low equivalent series resistance (ESR), high capacitance, excellent rate capability at room temperature and low temperatures, and long life. The AA-size devices assembled for testing have ESRs of 20-30 m{Omega} at 1000 Hz and capacitances of about 6 Farads. They are capable of being discharged at very high rates. The capacity at 15 Amps is about 71% of the capacity at 1 Amp. The capacity at 1 Amp and {minus}40{degrees}C is 57% of the room-temperature 1 Amp capacity. AA Aerocapacitors have demonstrated 32,000 cycles in cycle life testing. After an initial capacity decrease of about 17% the capacity remained almost constant between cycle 10,000 and cycle 32,000.

Isaacson, M.J.; Kraemer, B.J.; Laramore, T.J. [PolyStor Corp., Dublin, CA (United States)] [and others

1997-10-01T23:59:59.000Z

309

Ion source with improved primary arc collimation  

DOE Patents [OSTI]

An improved negative ion source is provided in which a self-biasing, molybdenum collimator is used to define the primary electron stream arc discharge from a filament operated at a negative potential. The collimator is located between the anode and the filament. It is electrically connected to the anode by means of an appropriate size resistor such that the collimator is biased at essentially the filament voltage during operation. Initially, the full arc voltage appears across the filament to collimator until the arc discharge strikes. Then the collimator biases itself to essentially filament potential due to current flow through the resistor thus defining the primary electron stream without intercepting any appreciable arc power. The collimator aperture is slightly smaller than the anode aperture to shield the anode from the arc power which, in the past, has caused overheating and erosion of the anode collimator during extended time pulsed-beam operation of the source. With the self-biasing collimator of this invention, the ion source may be operated from short pulse periods to steady-state without destroying the anode.

Dagenhart, W.K.

1983-12-16T23:59:59.000Z

310

Ion source with improved primary arc collimation  

DOE Patents [OSTI]

An improved negative ion source is provided in which a self-biasing, molybdenum collimator is used to define the primary electron stream arc discharge from a filament operated at a negative potential. The collimator is located between the anode and the filament. It is electrically connected to the anode by means of an appropriate size resistor such that the collimator is biased at essentially the filament voltage during operation. Initially, the full arc voltage appears across the filament to collimator until the arc discharge strikes. Then the collimator biases itself to essentially filament potential due to current flow through the resistor thus defining the primary electron stream without intercepting any appreciable arc power. The collimator aperture is slightly smaller than the anode aperture to shield the anode from the arc power, thereby preventing the exposure of the anode to the full arc power which, in the past, has caused overheating and erosion of the anode collimator during extended time pulsed-beam operation of the source. With the self-biasing collimator of this invention, the ion source may be operated from short pulse periods to steady-state without destroying the anode.

Dagenhart, William K. (Oak Ridge, TN)

1985-01-01T23:59:59.000Z

311

Computing the Antipenumbra of an Area Light Source  

E-Print Network [OSTI]

to be in umbra. If the point sees some, but not all, of the light source, it is said to be in penumbra. Otherwise, the point may see all of the light source. light source occluder umbra penumbra Figure 1: Umbra and penumbra, of the light source can be seen (Figure 2). For a given light source and set of holes or occluders, the umbra

Teller, Seth

312

Science and Technology of Future Light Sources  

SciTech Connect (OSTI)

Many of the important challenges facing humanity, including developing alternative sources of energy and improving health, are being addressed by advances that demand the improved understanding and control of matter. While the visualization, exploration, and manipulation of macroscopic matter have long been technological goals, scientific developments in the twentieth century have focused attention on understanding matter on the atomic scale through the underlying framework of quantum mechanics. Of special interest is matter that consists of natural or artificial nanoscale building blocks defined either by atomic structural arrangements or by electron or spin formations created by collective correlation effects. The essence of the challenge to the scientific community has been expressed in five grand challenges for directing matter and energy recently formulated by the Basic Energy Sciences Advisory Committee [1]. These challenges focus on increasing our understanding of, and ultimately control of, matter at the level of atoms, electrons. and spins, as illustrated in Figure 1.1, and serve the entire range of science from advanced materials to life sciences. Meeting these challenges will require new tools that extend our reach into regions of higher spatial, temporal, and energy resolution. X-rays with energies above 10 keV offer capabilities extending beyond the nanoworld shown in Figure 1.1 due to their ability to penetrate into optically opaque or thick objects. This opens the door to combining atomic level information from scattering studies with 3D information on longer length scales from real space imaging with a resolution approaching 1 nm. The investigation of multiple length scales is important in hierarchical structures, providing knowledge about function of living organisms, the atomistic origin of materials failure, the optimization of industrial synthesis, or the working of devices. Since the fundamental interaction that holds matter together is of electromagnetic origin, it is intuitively clear that electromagnetic radiation is the critical tool in the study of material properties. On the level of atoms, electrons, and spins, x-rays have proved especially valuable. Future advanced x-ray sources and instrumentation will extend the power of x-ray methods to reach greater spatial resolution, increased sensitivity, and unexplored temporal domains. The purpose of this document is threefold: (1) summarize scientific opportunities that are beyond the reach of today's x-ray sources and instrumentation; (2) summarize the requirements for advanced x-ray sources and instrumentation needed to realize these scientific opportunities, as well as potential methods of achieving them; and (3) outline the R&D required to establish the technical feasibility of these advanced x-ray sources and instrumentation.

Dierker,S.; Bergmann, U.; Corlett, J.; Dierker, S.; Falcone, R.; Galayda, J.; Gibson, M.; Hastings, J.; Hettel, B.; Hill, J.; Hussain, Z.; Kao, C.-C.; Kirx, J.; Long, G.; McCurdy, B.; Raubenheimer, T.; Sannibale, F.; Seeman, J.; Shen, Z.-X.; Shenoy, g.; Schoenlein, B.; Shen, Q.; Stephenson, B.; Stohr, J.; Zholents, A.

2008-12-01T23:59:59.000Z

313

Science and Technology of Future Light Sources  

SciTech Connect (OSTI)

Many of the important challenges facing humanity, including developing alternative sources of energy and improving health, are being addressed by advances that demand the improved understanding and control of matter. While the visualization, exploration, and manipulation of macroscopic matter have long been technological goals, scientific developments in the twentieth century have focused attention on understanding matter on the atomic scale through the underlying framework of quantum mechanics. Of special interest is matter that consists of natural or artificial nanoscale building blocks defined either by atomic structural arrangements or by electron or spin formations created by collective correlation effects The essence of the challenge to the scientific community has been expressed in five grand challenges for directing matter and energy recently formulated by the Basic Energy Sciences Advisory Committee [1]. These challenges focus on increasing our understanding of, and ultimately control of, matter at the level of atoms, electrons. and spins, as illustrated in Figure 1.1, and serve the entire range of science from advanced materials to life sciences. Meeting these challenges will require new tools that extend our reach into regions of higher spatial, temporal, and energy resolution. X-rays with energies above 10 keV offer capabilities extending beyond the nanoworld shown in Figure 1.1 due to their ability to penetrate into optically opaque or thick objects. This opens the door to combining atomic level information from scattering studies with 3D information on longer length scales from real space imaging with a resolution approaching 1 nm. The investigation of multiple length scales is important in hierarchical structures, providing knowledge about function of living organisms, the atomistic origin of materials failure, the optimization of industrial synthesis, or the working of devices. Since the fundamental interaction that holds matter together is of electromagnetic origin, it is intuitively clear that electromagnetic radiation is the critical tool in the study of material properties. On the level of atoms, electrons, and spins, x-rays have proved especially valuable. Future advanced x-ray sources and instrumentation will extend the power of x-ray methods to reach greater spatial resolution, increased sensitivity, and unexplored temporal domains. The purpose of this document is threefold: (1) summarize scientific opportunities that are beyond the reach of today's x-ray sources and instrumentation; (2) summarize the requirements for advanced x-ray sources and instrumentation needed to realize these scientific opportunities, as well as potential methods of achieving them; and (3) outline the R&D required to establish the technical feasibility of these advanced x-ray sources and instrumentation.

Bergmann, Uwe; Corlett, John; Dierker, Steve; Falcone, Roger; Galayda, John; Gibson, Murray; Hastings, Jerry; Hettel, Bob; Hill, John; Hussain, Zahid; Kao, Chi-Chang; Kirz, Janos; Long, Danielle; McCurdy, Bill; Raubenheimer, Tor; Sannibale, Fernando; Seeman, John; Shen, Z.-X.; Schenoy, Gopal; Schoenlein, Bob; Shen, Qun; Stephenson, Brian; St& #246; hr, Joachim; Zholents, Alexander

2009-01-28T23:59:59.000Z

314

High Brightness Neutron Source for Radiography  

SciTech Connect (OSTI)

This research and development program was designed to improve nondestructive evaluation of large mechanical objects by providing both fast and thermal neutron sources for radiography. Neutron radiography permits inspection inside objects that x-rays cannot penetrate and permits imaging of corrosion and cracks in low-density materials. Discovering of fatigue cracks and corrosion in piping without the necessity of insulation removal is possible. Neutron radiography sources can provide for the nondestructive testing interests of commercial and military aircraft, public utilities and petrochemical organizations. Three neutron prototype neutron generators were designed and fabricated based on original research done at the Lawrence Berkeley National Laboratory (LBNL). The research and development of these generators was successfully continued by LBNL and Adelphi Technology Inc. under this STTR. The original design goals of high neutron yield and generator robustness have been achieved, using new technology developed under this grant. In one prototype generator, the fast neutron yield and brightness was roughly 10 times larger than previously marketed neutron generators using the same deuterium-deuterium reaction. In another generator, we integrate a moderator with a fast neutron source, resulting in a high brightness thermal neutron generator. The moderator acts as both conventional moderator and mechanical and electrical support structure for the generator and effectively mimics a nuclear reactor. In addition to the new prototype generators, an entirely new plasma ion source for neutron production was developed. First developed by LBNL, this source uses a spiral antenna to more efficiently couple the RF radiation into the plasma, reducing the required gas pressure so that the generator head can be completely sealed, permitting the possible use of tritium gas. This also permits the generator to use the deuterium-tritium reaction to produce 14-MeV neutrons with increases of yield of two orders of magnitude. The first fast neutron radiographic images were obtained using neutron cameras and a new fast neutron generator. These early images demonstrated the feasibility of using fast neutrons for imaging and penetrating thick objects of high density and imaging. Fast neutrons can be used to image low atomic number materials (e.g. plastics, explosives, lubricants and ceramics) that are shielded by high density materials (e.g. lead, tungsten and uranium). Fast neutron radiography could be used as a means to screen weapons for flaws and chemical stability. X-ray radiography can not easily do this. Fast neutron imaging is technically difficult and, consequently, a completely undeveloped market. Two of the generators were designed to have small source size and high brightness, ideal for fast-neutron imaging. With these generators we successfully used two fast neutron cameras: one developed by us, and another developed by a collaborator, Commonwealth Scientific and Industrial Research Organization, CSIRO. We have successfully used these cameras to obtain low resolution images of various objects such as pipe fittings filled with water and other mechanical objects. Higher resolution and contrast images are expected by decreasing the source size and increasing generator yield.

Cremer, J. T.; Piestrup, Melvin, A.; Gary, Charles, K.; Harris, Jack, L. Williams, David, J.; Jones, Glenn, E.; Vainionpaa, J. , H.; Fuller, Michael, J.; Rothbart, George, H.; Kwan, J., W.; Ludewigt, B., A.; Gough, R.., A..; Reijonen, Jani; Leung, Ka-Ngo

2008-12-08T23:59:59.000Z

315

Backscatter absorption gas imaging systems and light sources therefore  

DOE Patents [OSTI]

The location of gases that are not visible to the unaided human eye can be determined using tuned light sources that spectroscopically probe the gases and cameras that can provide images corresponding to the absorption of the gases. The present invention is a light source for a backscatter absorption gas imaging (BAGI) system, and a light source incorporating the light source, that can be used to remotely detect and produce images of "invisible" gases. The inventive light source has a light producing element, an optical amplifier, and an optical parametric oscillator to generate wavelength tunable light in the IR. By using a multi-mode light source and an amplifier that operates using 915 nm pump sources, the power consumption of the light source is reduced to a level that can be operated by batteries for long periods of time. In addition, the light source is tunable over the absorption bands of many hydrocarbons, making it useful for detecting hazardous gases.

Kulp, Thomas Jan (Livermore, CA); Kliner, Dahv A. V. (San Ramon, CA); Sommers, Ricky (Oakley, CA); Goers, Uta-Barbara (Campbell, NY); Armstrong, Karla M. (Livermore, CA)

2006-12-19T23:59:59.000Z

316

Illumination system having a plurality of movable sources  

DOE Patents [OSTI]

An illumination system includes several discharge sources that are multiplexed together to reduce the amount of debris generated. The system includes: (a) a first electromagnetic radiation source array that includes a plurality of first activatable radiation source elements that are positioned on a first movable carriage; (b) a second electromagnetic radiation source array that includes a plurality of second activatable radiation source elements that are positioned on a second movable carriage; (c) means for directing electromagnetic radiation from the first electromagnetic radiation source array and electromagnetic radiation from the second electromagnetic radiation source array toward a common optical path; (d) means for synchronizing (i) the movements of the first movable carriage and of the second movable carriage and (ii) the activation of the first electromagnetic radiation source array and of the second electromagnetic radiation source array to provide an essentially continuous illumination of electromagnetic radiation along the common optical path.

Sweatt, William C. (Albuquerque, NM); Kubiak, Glenn D. (Livermore, CA)

2002-01-01T23:59:59.000Z

317

Particle beam generator using a radioactive source  

DOE Patents [OSTI]

The apparatus of the present invention selects from particles emitted by a radioactive source those particles having momentum within a desired range and focuses the selected particles in a beam having at least one narrow cross-dimension, and at the same time attenuates potentially disruptive gamma rays and low energy particles. Two major components of the present invention are an achromatic bending and focusing system, which includes sector magnets and quadrupole, and a quadrupole doublet final focus system. Permanent magnets utilized in the apparatus are constructed of a ceramic (ferrite) material which is inexpensive and easily machined.

Underwood, David G. (Naperville, IL)

1993-01-01T23:59:59.000Z

318

Particle beam generator using a radioactive source  

DOE Patents [OSTI]

The apparatus of the present invention selects from particles emitted by a radioactive source those particles having momentum within a desired range and focuses the selected particles in a beam having at least one narrow cross-dimension, and at the same time attenuates potentially disruptive gamma rays and low energy particles. Two major components of the present invention are an achromatic bending and focusing system, which includes sector magnets and quadrupole, and a quadrupole doublet final focus system. Permanent magnets utilized in the apparatus are constructed of a ceramic (ferrite) material which is inexpensive and easily machined.

Underwood, D.G.

1993-03-30T23:59:59.000Z

319

Quality Assurance Source Requirements Traceability Database  

SciTech Connect (OSTI)

At the Yucca Mountain Project the Project Requirements Processing System assists in the management of relationships between regulatory and national/industry standards source criteria, and Quality Assurance Requirements and Description document (DOE/R W-0333P) requirements to create compliance matrices representing respective relationships. The matrices are submitted to the U.S. Nuclear Regulatory Commission to assist in the commission's review, interpretation, and concurrence with the Yucca Mountain Project QA program document. The tool is highly customized to meet the needs of the Office of Civilian Radioactive Waste Management Office of Quality Assurance.

MURTHY, R., NAYDENOVA, A., DEKLEVER, R., BOONE, A.

2006-01-30T23:59:59.000Z

320

Update on the Electron Source Model  

SciTech Connect (OSTI)

We summarize work done in FY12 on the Los Alamos Electron Source Model (ESM), which predicts the distribution of beta-decay electrons after a high altitude nuclear explosion (HANE) as a function of L, energy, and pitch angle. In the last year we have compared model results with data taken after the Russian 2 HANE test of 1962 and presented results at the HEART conference. We discuss our future plans to continue comparison with HANE data and to develop the code to allow a more complex set of initial conditions.

Cowee, Misa [Los Alamos National Laboratory; Winske, Dan [Los Alamos National Laboratory

2012-07-17T23:59:59.000Z

Note: This page contains sample records for the topic "addressee source pm-o" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Sealed Radioactive Source Accountability and Control Guide  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

For use with Title 10, Code of Federal Regulations, Part 835, Occupational Radiation Protection. This Guide provides an acceptable methodology for establishing and operating a sealed radioactive source accountability and control program that will comply with U.S. Department of Energy (DOE) requirements specified in Title 10 of the Code of Federal Regulations (CFR), Part 835, Occupational Radiation Protection (DOE 1998a), hereinafter referred to as 10 CFR 835. In particular, this Guide provides guidance for achieving compliance with subpart M of 10 CFR 835. Canceled by DOE G 441.1-1B.

1999-04-15T23:59:59.000Z

322

Focused ion beam source method and apparatus  

DOE Patents [OSTI]

A focused ion beam having a cross section of submicron diameter, a high ion current, and a narrow energy range is generated from a target comprised of particle source material by laser ablation. The method involves directing a laser beam having a cross section of critical diameter onto the target, producing a cloud of laser ablated particles having unique characteristics, and extracting and focusing a charged particle beam from the laser ablated cloud. The method is especially suited for producing focused ion beams for semiconductor device analysis and modification.

Pellin, Michael J. (Naperville, IL); Lykke, Keith R. (Gaithersburg, MD); Lill, Thorsten B. (Sunnyvale, CA)

2000-01-01T23:59:59.000Z

323

Tunable, superconducting, surface-emitting teraherz source  

DOE Patents [OSTI]

A compact, solid-state THz source based on the driven Josephson vortex lattice in a highly anisotropic superconductor such as Bi.sub.2Sr.sub.2CaCu.sub.2O.sub.8 that allows cw emission at tunable frequency. A second order metallic Bragg grating is used to achieve impedance matching and to induce surface emission of THz-radiation from a Bi.sub.2Sr.sub.2CaCu.sub.2O.sub.8 sample. Steering of the emitted THz beam is accomplished by tuning the Josephson vortex spacing around the grating period using a superimposed magnetic control field.

Welp, Ulrich (Lisle, IL); Koshelev, Alexei E. (Bolingbrook, IL); Gray, Kenneth E. (Evanston, IL); Kwok, Wai-Kwong (Evanston, IL); Vlasko-Vlasov, Vitalii (Downers Grove, IL)

2009-10-27T23:59:59.000Z

324

An Alternative Source for Dark Energy  

E-Print Network [OSTI]

In the present work, an alternative interpretation of the source of accelerated expansion of the Universe is suggested. A probable candidate is the interaction between the quantum spin of a moving particle and the torsion of space-time, produced by the background gravitational field of the Universe. This interaction has been suggested by the author in a previous work, with some experimental and observational evidences for its existence. It has been shown that this interaction gives rise to a repulsive force. The accelerated expansion of the Universe may give a further evidence on the existence of this interaction on the cosmological scale.

M. I. Wanas

2007-04-27T23:59:59.000Z

325

Radiant Energy Power Source for Jet Aircraft  

SciTech Connect (OSTI)

This report beings with a historical overview on the origin and early beginnings of Radiant Energy Power Source for Jet Aircraft. The report reviews the work done in Phase I (Grant DE-FG01-82CE-15144) and then gives a discussion of Phase II (Grant DE-FG01-86CE-15301). Included is a reasonably detailed discussion of photovoltaic cells and the research and development needed in this area. The report closes with a historical perspective and summary related to situations historically encountered on projects of this nature. 15 refs.

Doellner, O.L.

1992-02-01T23:59:59.000Z

326

Emissivity Tuned Emitter for RTPV Power Sources  

SciTech Connect (OSTI)

Every mission launched by NASA to the outer planets has produced unexpected results. The Voyager I and II, Galileo, and Cassini missions produced images and collected scientific data that totally revolutionized our understanding of the solar system and the formation of the planetary systems. These missions were enabled by the use of nuclear power. Because of the distances from the Sun, electrical power was produced using the radioactive decay of a plutonium isotope. Radioisotopic Thermoelectric Generators (RTGs) used in the past and currently used Multi-Mission RTGs (MMRTGs) provide power for space missions. Unfortunately, RTGs rely on thermocouples to convert heat to electricity and are inherently inefficient ({approx} 3-7% thermal to electric efficiency). A Radioisotope Thermal Photovoltaic (RTPV) power source has the potential to reduce the specific mass of the onboard power supply by increasing the efficiency of thermal to electric conversion. In an RTPV, a radioisotope heats an emitter, which emits light to a photovoltaic (PV) cell, which converts the light into electricity. Developing an emitter tuned to the desired wavelength of the photovoltaic is a key part in increasing overall performance. Researchers at the NASA Glenn Research Center (GRC) have built a Thermal Photovoltaic (TPV) system, that utilizes a simulated General Purpose Heat Source (GPHS) from a MMRTG to heat a tantalum emitter. The GPHS is a block of graphite roughly 10 cm by 10 cm by 5 cm. A fully loaded GPHS produces 250 w of thermal power and weighs 1.6 kgs. The GRC system relies on the GPHS unit radiating at 1200 K to a tantalum emitter that, in turn, radiates light to a GaInAs photo-voltaic cell. The GRC claims system efficiency of conversion of 15%. The specific mass is around 167 kg/kWe. A RTPV power source that utilized a ceramic or ceramic-metal (cermet) matrix would allow for the combination of the heat source, canister, and emitter into one compact unit, and allow variation in size and shape to optimize temperature and emission spectra.

Carl M. Stoots; Robert C. O'Brien; Troy M. Howe

2012-03-01T23:59:59.000Z

327

Photon Source Parameters | Stanford Synchrotron Radiation Lightsource  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary)morphinanInformation Desert Southwest RegionatSearch Welcome to theNews & Blog ¬Ľ PhotoOxygenPhoton Source

328

LightSource Renewables | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of Inspector GeneralDepartmentAUDIT REPORTOpenWende New Energy Co Ltd JumpLightSource Renewables Jump to:

329

Open Source Software | Argonne National Laboratory  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 - September 2006 The 2002 WholesaleEnergy'sRunning jobs Debugging andOpen Source

330

Property:HeatSource | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 No revisionEnvReviewNonInvasiveExploration Jump to:FieldProceduresFY JumpThis is a property of typeHeatSource Jump

331

Source Selection Guide | Department of Energy  

Energy Savers [EERE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of Inspector GeneralDepartment of Energyof the Americas |DOEEnergy32.1 (October 2011) 1 ReviewingSource

332

Capital Sources and Providers | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-Up fromDepartmentTie Ltd:June 20154:04-21-2014 (866) 448 - DEPOMeeting No.Capital Sources

333

Sandia National Laboratories: terahertz sources and detectors  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas ConchasPassiveSubmitted for USMaterialstheterahertz sources and detectors Jerry Simmons

334

Sandia National Laboratories: Advanced Light Source  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 -the Mid-Infrared0 ResourceAwardsSafeguardsEngineersSandia/NewAdvanced Light Source

335

Source fabrication and lifetime for Li{sup +} ion beams extracted from alumino-silicate sources  

SciTech Connect (OSTI)

A space-charge-limited beam with current densities (J) exceeding 1 mA/cm{sup 2} have been measured from lithium alumino-silicate ion sources at a temperature of {approx}1275 deg. C. At higher extraction voltages, the source appears to become emission limited with J{>=} 1.5 mA/cm{sup 2}, and J increases weakly with the applied voltage. A 6.35 mm diameter source with an alumino-silicate coating, {<=}0.25 mm thick, has a measured lifetime of {approx}40 h at {approx}1275 deg. C, when pulsed at 0.05 Hz and with pulse length of {approx}6 {mu}s each. At this rate, the source lifetime was independent of the actual beam charge extracted due to the loss of neutral atoms at high temperature. The source lifetime increases with the amount of alumino-silicate coated on the emitting surface, and may also be further extended if the temperature is reduced between pulses.

Roy, Prabir K.; Greenway, Wayne G.; Kwan, Joe W. [Lawrence Berkeley National Laboratory (LBNL), One Cyclotron Road, Berkeley, California 94720 (United States)

2012-04-15T23:59:59.000Z

336

Source fabrication and lifetime for Li{sup +} ion beams extracted from alumino-silicate sources  

SciTech Connect (OSTI)

A space-charge-limited beam with current densities (J) exceeding 1 mA/cm{sup 2} have been measured from lithium alumino-silicate ion sources at a temperature of ?1275{degrees}C. At higher extraction voltages, the source appears to become emission limited with J ? 1.5 mA/cm{sup 2}, and J increases weakly with the applied voltage. A source with an alumino-silicate coating 6.35 mm in diameter and ?0.25 mm thick, has a lifetime of ?40 hours at ?1275{degrees}C, when pulsed at 0.05 Hz and with pulse length of ?6 ?s each. At this rate, the source lifetime was independent of the actual beam charge extracted due to the loss of neutral atoms at high temperature. Furthermore, the source lifetime increases with the amount of alumino-silicate coated on the emitting surface, and may also be extended if the temperature is reduced between pulses.

Greenway, W. G.; Kwan, J. W.

2012-02-10T23:59:59.000Z

337

Source fabrication and lifetime for Li+ ion beams extracted from alumino-silicate sources  

SciTech Connect (OSTI)

A space-charge-limited beam with current densities (J) exceeding 1 mA/cm{sup 2} have been measured from lithium alumino-silicate ion sources at a temperature of #24;~1275#14;{degrees} C. At higher extraction voltages, the source appears to become emission limited with J #21;{>=} 1.5 mA/cm{sup 2}, and J increases weakly with the applied voltage. A 6.35 mm diameter source with an alumino-silicate coating, {<=}#20;0.25 mm thick, has a measured lifetime of ~#24;40 hours at ~#24;1275#14;{degrees} C, when pulsed at 0.05 Hz and with pulse length of #24;~6 μs each. At this rate, the source lifetime was independent of the actual beam charge extracted due to the loss of neutral atoms at high temperature. The source lifetime increases with the amount of alumino-silicate coated on the emitting surface, and may also be further extended if the temperature is reduced between pulses.

Roy, Prabir K.; Greenway, Wayne G.; Kwan, Joe W

2012-03-05T23:59:59.000Z

338

Samarium-145 and its use as a radiation source  

DOE Patents [OSTI]

The present invention covers a new radiation source, samarium-145, with radiation energies slightly above those of I-125 and a half-life of 340 days. The samarium-145 source is produced by neutron irradiation of SM-144. This new source is useful as the implanted radiation source in photon activation therapy of malignant tumors to activate the stable I-127 contained in the IdUrd accumulated in the tumor, causing radiation sensitization and Auger cascades that irreperably damage the tumor cells. This new source is also useful as a brachytherapy source.

Fairchild, Ralph G. (Setauket, NY); Laster, Brenda H. (Plainview, NY); Packer, Samuel (Great Neck, NY)

1989-01-01T23:59:59.000Z

339

High Current Ion Sources and Injectors for Heavy Ion Fusion  

SciTech Connect (OSTI)

Heavy ion beam driven inertial fusion requires short ion beam pulses with high current and high brightness. Depending on the beam current and the number of beams in the driver system, the injector can use a large diameter surface ionization source or merge an array of small beamlets from a plasma source. In this paper, we review the scaling laws that govern the injector design and the various ion source options including the contact ionizer, the aluminosilicate source, the multicusp plasma source, and the MEVVA source.

Kwan, Joe W.

2005-02-15T23:59:59.000Z

340

Open Source CRM Systems for SMEs  

E-Print Network [OSTI]

Customer Relationship Management (CRM) systems are very common in large companies. However, CRM systems are not very common in Small and Medium Enterprises (SMEs). Most SMEs do not implement CRM systems due to several reasons, such as lack of knowledge about CRM or lack of financial resources to implement CRM systems. SMEs have to start implementing Information Systems (IS) technology into their business operations in order to improve business values and gain more competitive advantage over rivals. CRM system has the potential to help improve the business value and competitive capabilities of SMEs. Given the high fixed costs of normal activity of companies, we intend to promote free and viable solutions for small and medium businesses. In this paper, we explain the reasons why SMEs do not implement CRM system and the benefits of using open source CRM system in SMEs. We also describe the functionalities of top open source CRM systems, examining the applicability of these tools in fitting the needs of SMEs.

Tereso, Marco

2011-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "addressee source pm-o" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Compton backscattered collimated x-ray source  

DOE Patents [OSTI]

A high-intensity, inexpensive and collimated x-ray source is disclosed for applications such as x-ray lithography is disclosed. An intense pulse from a high power laser, stored in a high-finesse resonator, repetitively collides nearly head-on with and Compton backscatters off a bunched electron beam, having relatively low energy and circulating in a compact storage ring. Both the laser and the electron beams are tightly focused and matched at the interaction region inside the optical resonator. The laser-electron interaction not only gives rise to x-rays at the desired wavelength, but also cools and stabilizes the electrons against intrabeam scattering and Coulomb repulsion with each other in the storage ring. This cooling provides a compact, intense bunch of electrons suitable for many applications. In particular, a sufficient amount of x-rays can be generated by this device to make it an excellent and flexible Compton backscattered x-ray (CBX) source for high throughput x-ray lithography and many other applications. 4 figs.

Ruth, R.D.; Huang, Z.

1998-10-20T23:59:59.000Z

342

Compton backscattered collmated X-ray source  

DOE Patents [OSTI]

A high-intensity, inexpensive and collimated x-ray source for applications such as x-ray lithography is disclosed. An intense pulse from a high power laser, stored in a high-finesse resonator, repetitively collides nearly head-on with and Compton backscatters off a bunched electron beam, having relatively low energy and circulating in a compact storage ring. Both the laser and the electron beams are tightly focused and matched at the interaction region inside the optical resonator. The laser-electron interaction not only gives rise to x-rays at the desired wavelength, but also cools and stabilizes the electrons against intrabeam scattering and Coulomb repulsion with each other in the storage ring. This cooling provides a compact, intense bunch of electrons suitable for many applications. In particular, a sufficient amount of x-rays can be generated by this device to make it an excellent and flexible Compton backscattered x-ray (CBX) source for high throughput x-ray lithography and many other applications.

Ruth, Ronald D. (Woodside, CA); Huang, Zhirong (Stanford, CA)

2000-01-01T23:59:59.000Z

343

Compton backscattered collimated x-ray source  

DOE Patents [OSTI]

A high-intensity, inexpensive and collimated x-ray source for applications such as x-ray lithography is disclosed. An intense pulse from a high power laser, stored in a high-finesse resonator, repetitively collides nearly head-on with and Compton backscatters off a bunched electron beam, having relatively low energy and circulating in a compact storage ring. Both the laser and the electron beams are tightly focused and matched at the interaction region inside the optical resonator. The laser-electron interaction not only gives rise to x-rays at the desired wavelength, but also cools and stabilizes the electrons against intrabeam scattering and Coulomb repulsion with each other in the storage ring. This cooling provides a compact, intense bunch of electrons suitable for many applications. In particular, a sufficient amount of x-rays can be generated by this device to make it an excellent and flexible Compton backscattered x-ray (CBX) source for high throughput x-ray lithography and many other applications.

Ruth, Ronald D. (Woodside, CA); Huang, Zhirong (Stanford, CA)

1998-01-01T23:59:59.000Z

344

The enriched chromium neutrino source for GALLEX  

SciTech Connect (OSTI)

The preparation and study of an intense source of neutrinos in the form of neutron irradiated materials which are enriched in Cr-50 for use in the GALLEX solar neutrino experiment are discussed. Chromyl fluoride gas is enriched in the Cr-50 isotope by gas centrifugation and subsequently converted to a very stable form of chromium oxide. The results of neutron activation analyses of such chromium samples indicate low levels of any long-lived activities, but show that short-lived activities, in particular Na-24, may be of concern. These results show that irradiating chromium oxide enriched in Cr-50 is preferable to irradiating either natural chromium or argon gas as a means of producing a neutrino source to calibrate the GALLEX detector. These results of the impurity level analysis of the enriched chromyl fluoride gas and its conversion to the oxide are also of interest to work in progress by other members of the Collaboration investigating an alternative conversion of the enriched gas to chromium metal. 35 refs., 12 figs., 5 tabs.

Hartmann, F.X.; Hahn, R.L.

1991-01-18T23:59:59.000Z

345

IONIZED OUTFLOWS FROM COMPACT STEEP SPECTRUM SOURCES  

SciTech Connect (OSTI)

Massive outflows are known to exist, in the form of extended emission-line regions (EELRs), around about one-third of powerful FR II radio sources. We investigate the origin of these EELRs by studying the emission-line regions around compact-steep-spectrum (CSS) radio galaxies that are younger (10{sup 3}-10{sup 5} yr old) versions of the FR II radio galaxies. We have searched for and analyzed the emission-line regions around 11 CSS sources by taking integral field spectra using Gemini Multi-Object Spectrograph on Gemini North. We fit the [O III] {lambda}5007 line and present the velocity maps for each detected emission-line region. We find, in most cases, that the emission-line regions have multi-component velocity structures with different velocity dispersions and/or flux distributions for each component. The velocity gradients of the emission-line gas are mostly well aligned with the radio axis, suggesting a direct causal link between the outflowing gas and the radio jets. The complex velocity structure may be a result of different driving mechanisms related to the onset of the radio jets. We also present the results from the line-ratio diagnostics we used to analyze the ionization mechanism of the extended gas, which supports the scenario where the emission-line regions are ionized by a combination of active galactic nucleus radiation and shock excitation.

Shih, Hsin-Yi; Stockton, Alan; Kewley, Lisa, E-mail: hsshih@ifa.hawaii.edu, E-mail: stockton@ifa.hawaii.edu, E-mail: lisa.kewley@anu.edu.au [Institute for Astronomy, University of Hawaii, 2680 Woodlawn Drive, Honolulu, HI 96822 (United States)

2013-08-01T23:59:59.000Z

346

Nutrient sources and loadings for the proposed Millican Lake  

E-Print Network [OSTI]

to Lee(14), sources of phosphorus and nitrogen in urban runoff include fertilizers used on lawns, dust fall, leaves, wastes from pets, automobile ngine cmiosicns, and othe- combustion sources. Weibel, et al. , (38) found total phosphorus loadings of 0...

Vigil, Samuel Alexander

1974-01-01T23:59:59.000Z

347

Accelerator-Driven Neutron Source for Cargo Screening  

E-Print Network [OSTI]

Accelerator-Driven Neutron Source for Cargo Screening 1 B.A.The design of an accelerator-driven neutron source isQuadrupole (RFQ) accelerator and a neutron production gas

2006-01-01T23:59:59.000Z

348

An open source software selection process and a case study  

E-Print Network [OSTI]

In this study, I design an empirical open source software selection process, which reuses some ideas from Commercial Off-the-Shelf selection methods and addresses the characteristics of the open source software. Basically, it consists of three basic...

He, Guobin

2009-06-02T23:59:59.000Z

349

Development of a criteria based strategic sourcing model  

E-Print Network [OSTI]

Strategic sourcing is a key factor in enhancing Nike's competitiveness and organizational and operational performances. As Nike faces increasing pressure to expand margins and reduce source base risk during a climate of ...

QuiŮonez, Carlo G. (Carlo Gabriel)

2013-01-01T23:59:59.000Z

350

Policy Flash 2013-57 New Strategic Sourcing Acquisition Guide...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Policy Flash 2013-57 New Strategic Sourcing Acquisition Guide Chapter 7.2 Policy Flash 2013-57 New Strategic Sourcing Acquisition Guide Chapter 7.2 Questions concerning this policy...

351

adifor fortran source: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

sources in nearby spiral and elliptical galaxies is given. P. Kahabka 2002-12-02 265 Giant Radio Sources Astrophysics (arXiv) Summary: We present multi-frequency VLA...

352

Underdetermined Blind Source Separation Based on Subspace Representation  

E-Print Network [OSTI]

This paper considers the problem of blindly separating sub- and super-Gaussian sources from underdetermined mixtures. The underlying sources are assumed to be composed of two orthogonal components: one lying in the rowspace ...

Kim, Sanggyun

353

EIS-0247: Construction and Operation of the Spallation Neutron Source  

Broader source: Energy.gov [DOE]

The United States needs a high-flux, short- pulsed neutron source to provide its scientific and industrial research communities with a much more intense source of pulsed neutrons for neutron...

354

Development of Li+ alumino-silicate ion source  

E-Print Network [OSTI]

Development of a Li + alumino-silicate ion source ? P. K.kinetic energy. Alumino-silicates sources of K + and Cs +and sintering the Li alumino- silicate to the substrate to

Roy, P.K.

2009-01-01T23:59:59.000Z

355

An Open Source Simulation Model for Soil and Sediment Bioturbation  

E-Print Network [OSTI]

An Open Source Simulation Model for Soil and Sediment Bioturbation Katja Schiffers1 *¤a , Lorna (2011) An Open Source Simulation Model for Soil and Sediment Bioturbation. PLoS ONE 6(12): e28028. doi

Paris-Sud XI, Université de

356

arc ion sources: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

and performance of vacuum arc ion sources. Brown, I 2013-01-01 2 Development of High Efficiency Versatile Arc Discharge Ion Source (VADIS) at CERN Isolde CERN Preprints Summary: We...

357

arc ion source: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

and performance of vacuum arc ion sources. Brown, I 2013-01-01 2 Development of High Efficiency Versatile Arc Discharge Ion Source (VADIS) at CERN Isolde CERN Preprints Summary: We...

358

Advanced Neutron Source (ANS) Project progress report FY 1992  

SciTech Connect (OSTI)

This report discusses project management, research and development, design, and safety at the Advanced Neutron Source facility.

Campbell, J.H. (ed.); Selby, D.L.; Harrington.

1993-01-01T23:59:59.000Z

359

Original article Pollen sources for Apis mellifera L (Hym, Apidae)  

E-Print Network [OSTI]

Original article Pollen sources for Apis mellifera L (Hym, Apidae) in Surinam, based on pollen samples were taken from Apis mellife- ra hives in Surinam in order to identify pollen sources) identified the sources of pollen col- lected by stingless bees in Surinam, our study is the first to examine

Paris-Sud XI, Université de

360

Ground-Source Heat Pumps in Cold Climates  

E-Print Network [OSTI]

Ground-Source Heat Pumps in Cold Climates The Current State of the Alaska Industry, a Review-Source Heat Pumps in Cold Climates The Current State of the Alaska Industry, a Review of the Literature and contributions from individuals and organizations involved in ground-source heat pump installation around Alaska

Wagner, Diane

Note: This page contains sample records for the topic "addressee source pm-o" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Overcoming Barriers to Ground Source Heat Pumps in California  

E-Print Network [OSTI]

Overcoming Barriers to Ground Source Heat Pumps in California Geothermal Resources Development Account http://www.energy.ca.gov/geothermal/ grda.html May 2011 The Issue Ground source heat pumps can far made little impact in California. Estimates are that adoption of ground source heat pumps

362

Maximum Constant Boost Control of the Z-Source Inverter  

E-Print Network [OSTI]

Maximum Constant Boost Control of the Z-Source Inverter Miaosen Shen1 , Jin Wang1 , Alan Joseph1 Laboratory Abstract: This paper proposes two maximum constant boost control methods for the Z-source inverter to modulation index is analyzed in detail and verified by simulation and experiment. Keywords- Z-source inverter

Tolbert, Leon M.

363

A Cascade Multilevel Inverter Using a Single DC Source  

E-Print Network [OSTI]

A Cascade Multilevel Inverter Using a Single DC Source Zhong Du1, Leon M. Tolbert2 3, John N inverter can be implemented using only a single DC power source and capacitors. A standard cascade multilevel inverter requires DC sources for 2 + 1 levels. Without requiring transformers, the scheme proposed

Tolbert, Leon M.

364

Multiple Aphid Resistance from Alien Sources and its Chromosomal Location  

E-Print Network [OSTI]

Multiple Aphid Resistance from Alien Sources and its Chromosomal Location in Bread Wheat Leonardo A Alien Sources and Its Chromosomal Location in Bread Wheat Abstract Wheat (Triticum aestivum) is a very of this thesis were to: 1) identify novel sources of resistance to multiple aphid species in a wheat-alien

365

Model Reduction for Power Electronics Systems with Multiple Heat Sources  

E-Print Network [OSTI]

Model Reduction for Power Electronics Systems with Multiple Heat Sources A. Augustin, T. Hauck, B demonstrates the model order re- duction procedures applied to semiconductor devices with multiple heat sources. The approach is demonstrated for a device with nine heat sources where some of them are perma- nently active

Paris-Sud XI, Université de

366

Suspended sediment sources and tributary effects in the lower  

E-Print Network [OSTI]

Suspended sediment sources and tributary effects in the lower reaches of a coastal plain stream Abstract Characterizing the dynamics of fluvial sediment sources over space and time is often critical in identifying human impacts on fluvial systems. Upland interfluve and subsoil sources of suspended sediment

Yeager, Kevin M.

367

Detection of aeroacoustic sound sources on aircraft and wind turbines  

E-Print Network [OSTI]

Detection of aeroacoustic sound sources on aircraft and wind turbines Stefan Oerlemans #12;Detection of aeroacoustic sound sources on aircraft and wind turbines S. Oerlemans Thesis University;DETECTION OF AEROACOUSTIC SOUND SOURCES ON AIRCRAFT AND WIND TURBINES PROEFSCHRIFT ter verkrijging van de

Twente, Universiteit

368

ADVANCES IN MODELING OF GROUND-SOURCE HEAT  

E-Print Network [OSTI]

ADVANCES IN MODELING OF GROUND-SOURCE HEAT PUMP SYSTEMS By ANDREW D. CHIASSON Bachelor of Applied 1999 #12;ii ADVANCES IN MODELING OF GROUND-SOURCE HEAT PUMP SYSTEMS Thesis Approved: Thesis Adviser..............................................................................................................1 1.1. Overview of Ground-Source Heat Pump Systems ..............................................1 1

369

DESIGN OF AN EXPERIMENTAL FACILITY FOR HYBRID GROUND SOURCE HEAT  

E-Print Network [OSTI]

DESIGN OF AN EXPERIMENTAL FACILITY FOR HYBRID GROUND SOURCE HEAT PUMP SYSTEMS By SHAWN ALEX HERN.1 HYBRID GROUND SOURCE HEAT PUMP SYSTEM DESIGN........................................2-3 2.1.1 Design...............................................................................2-5 2.2 HYBRID GROUND SOURCE HEAT PUMP SYSTEM SIMULATION................................2-9 3

370

APPLICATIONS OF HYBRID GROUND SOURCE HEAT PUMP SYSTEMS TO  

E-Print Network [OSTI]

APPLICATIONS OF HYBRID GROUND SOURCE HEAT PUMP SYSTEMS TO BUILDINGS AND BRIDGE DECKS. By MAHADEVAN Chapter Page 1. Introduction 1.1. Overview of hybrid ground source heat pump systems 1.2. Literature review 1.3. Thesis objective and scope 2. Optimal sizing of hybrid ground source heat pump system

371

ICE SHEET SOURCES OF SEA LEVEL RISE AND FRESHWATER DISCHARGE  

E-Print Network [OSTI]

ICE SHEET SOURCES OF SEA LEVEL RISE AND FRESHWATER DISCHARGE DURING THE LAST DEGLACIATION Anders E the sources of sea level rise and freshwater dis- charge to the global oceans associated with retreat of ice­10 m sea level rise at 19.0­19.5 ka, sourced largely from Northern Hemisphere ice sheet retreat

Carlson, Anders

372

Blind Source Separation: the Sparsity Starck J.-L. a  

E-Print Network [OSTI]

Blind Source Separation: the Sparsity Revolution Bobin J. a Starck J.-L. a Moudden Y. a Fadili M issues have already been addressed as testified by the wide literature on the so-called blind source signal representations. GMCA is a fast and efficient blind source separation method. In remote sensing

Paris-Sud XI, Universitť de

373

Blind Source Separation and Independent Component Analysis: Seungjin Choi  

E-Print Network [OSTI]

REVIEW Blind Source Separation and Independent Component Analysis: A Review Seungjin Choi, sylee}@kaist.ac.kr (Submitted on October 20, 2004) Abstract - Blind source separation (BSS meaningful coding or blind source estimation. The key issue is to find a such transformation or coding

Cichocki, Andrzej

374

Blind Source Separation and the Analysis of Microarray Data  

E-Print Network [OSTI]

1 Blind Source Separation and the Analysis of Microarray Data P. Chiappetta, M.C. Roubaud, B. Torr expression data, based upon blind source separation techniques. This approach exploits higher order validates the proposed approach. Keywords gene expression data, blind source separation, independent

Torrťsani, Bruno

375

for the Open Source Modelica Consortium December 4, 2007  

E-Print Network [OSTI]

1 BYLAWS for the Open Source Modelica Consortium (OSMC) December 4, 2007 Adopted at the statutory Source Modelica Consortium, abbreviated as OSMC. The association has its seat in LinkŲping, Sweden. ß1 and promoting the development and usage of the OpenModelica open source implementation of the Modelica computer

Zhao, Yuxiao

376

Video Source Identification in Lossy Wireless Networks Shaxun Chen  

E-Print Network [OSTI]

Video Source Identification in Lossy Wireless Networks Shaxun Chen , Amit Pande , Kai Zeng@ucdavis.edu, kzeng@umich.edu, pmohapatra@ucdavis.edu Abstract-- Video source identification is very important in valida- ting video evidence, tracking down video piracy crimes and regu- lating individual video sources

California at Davis, University of

377

ELECTRON CYCLOTRON RESONANCE DISCHARGE AS A SOURCE FOR HYDROGEN AND DEUTERIUM IONS PRODUCTION  

E-Print Network [OSTI]

of controlled thermonuclear fusion. Plasma sources are acknowledged to be among the most efficient sources

Boyer, Edmond

378

E-Print Network 3.0 - air pollution source Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

source Search Powered by Explorit Topic List Advanced Search Sample search results for: air pollution source...

379

E-Print Network 3.0 - alternative energy sources Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

sources Search Powered by Explorit Topic List Advanced Search Sample search results for: alternative energy sources...

380

E-Print Network 3.0 - alternative energy source Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

source Search Powered by Explorit Topic List Advanced Search Sample search results for: alternative energy source...

Note: This page contains sample records for the topic "addressee source pm-o" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Kansas Energy Sources: A Geological Review  

SciTech Connect (OSTI)

Kansas produces both conventional energy (oil, gas, and coal) and nonconventional (coalbed gas, wind, hydropower, nuclear, geothermal, solar, and biofuels) and ranks the 22nd in state energy production in the U.S. Nonrenewable conventional petroleum is the most important energy source with nonrenewable, nonconventional coalbed methane gas becoming increasingly important. Many stratigraphic units produce oil and/or gas somewhere in the state with the exception of the Salina Basin in north-central Kansas. Coalbed methane is produced from shallow wells drilled into the thin coal units in southeastern Kansas. At present, only two surface coal mines are active in southeastern Kansas. Although Kansas has been a major exporter of energy in the past (it ranked first in oil production in 1916), now, it is an energy importer.

Merriam, Daniel F., E-mail: dmerriam@kgs.ku.edu [University of Kansas (United States); Brady, Lawrence L.; Newell, K. David [University of Kansas, Kansas Geological Survey (United States)

2012-03-15T23:59:59.000Z

382

Peat as an alternaive energy source  

SciTech Connect (OSTI)

Peat remains a virtually unexploited energy source in the US in spite of large resources and a long history of use as a fuel in other countries. Areas that lack other fossil fuels are often the site of large peat lands. US resources are estimated at 1443 quadrillion Btus, with over half located in Alaska outside the permanent frostline. The Soviet Union, with over four times the US resource, is the largest commercial user. Harvesting techniques include dry and wet methods that utilize both thermal and mechanical dewatering. Peat is well suited for gasification by several processes, including the PEAT GAS process now being tested. Harvested peatlands can be made into productive farm and forest land if proper techniques are used to preserve water and air quality. (DCK)

Punwani, D.V.; Mensinger, M.C.

1981-01-05T23:59:59.000Z

383

High-power laser source evaluation  

SciTech Connect (OSTI)

This document reports progress in these areas: EXPERIMENTAL RESULTS FROM NOVA: TAMPED XENON UNDERDENSE X-RAY EMITTERS; MODELING MULTI-KEV RADIATION PRODUCTION OF XENON-FILLED BERYLLIUM CANS; MAPPING A CALCULATION FROM LASNEX TO CALE; HOT X RAYS FROM SEEDED NIF CAPSULES; HOHLRAUM DEBRIS MEASUREMENTS AT NOVA; FOAM AND STRUCTURAL RESPONSE CALCULATIONS FOR NIF NEUTRON EXPOSURE SAMPLE CASE ASSEMBLY DESIGN; NON-IGNITION X-RAY SOURCE FLUENCE-AREA PRODUCTS FOR NUCLEAR EFFECTS TESTING ON NIF. Also appended are reprints of two papers. The first is on the subject of ``X-Ray Production in Laser-Heated Xe Gas Targets.`` The second is on ``Efficient Production and Applications of 2- to 10-keV X Rays by Laser-Heated Underdense Radiators.``

Back, C.A.; Decker, C.D.; Dipeso, G.J.; Gerassimenko, M.; Managan, R.A.; Serduke, F.J.D.; Simonson, G.F.; Suter, L.J.

1997-07-01T23:59:59.000Z

384

Fusion: an energy source for synthetic fuels  

SciTech Connect (OSTI)

The decreasing availability of fossil fuels emphasizes the need to develop systems which will produce synthetic fuel to substitute for and supplement the natural supply. An important first step in the synthesis of liquid and gaseous fuels is the production of hydrogen. Thermonuclear fusion offers an inexhaustible source of energy for the production of hydrogen from water. Depending on design, electric generation efficiencies of approx. 40 to 60% and hydrogen production efficiencies by high temperature electrolysis of approx. 50 to 70% are projected for fusion reactors using high temperature blankets. Fusion/coal symbiotic systems appear economically promising for the first generation of commercial fusion synfuels plants. Coal production requirements and the environmental effects of large-scale coal usage would be greatly reduced by a fusion/coal system. In the long term, there could be a gradual transition to an inexhaustible energy system based solely on fusion.

Fillo, J A; Powell, J; Steinberg, M

1980-01-01T23:59:59.000Z

385

Gravitational Wave Sources from New Physics  

E-Print Network [OSTI]

Forthcoming advances in direct gravitational wave detection from kilohertz to nanohertz frequencies have unique capabilities to detect signatures from or set meaningful constraints on a wide range of new cosmological phenomena and new fundamental physics. A brief survey is presented of the post-inflationary gravitational radiation backgrounds predicted in cosmologies that include intense new classical sources such as first-order phase transitions, late-ending inflation, and dynamically active mesoscopic extra dimensions. LISA will provide the most sensitive direct probes of such phenomena near TeV energies or Terascale. LISA will also deeply probe the broadband background, and possibly bursts, from loops of cosmic superstrings predicted to form in current models of brane inflation.

Craig J. Hogan

2006-08-25T23:59:59.000Z

386

Core-melt source reduction system  

DOE Patents [OSTI]

A core-melt source reduction system for ending the progression of a molten core during a core-melt accident and resulting in a stable solid cool matrix. The system includes alternating layers of a core debris absorbing material and a barrier material. The core debris absorbing material serves to react with and absorb the molten core such that containment overpressurization and/or failure does not occur. The barrier material slows the progression of the molten core debris through the system such that the molten core has sufficient time to react with the core absorbing material. The system includes a provision for cooling the glass/molten core mass after the reaction such that a stable solid cool matrix results. 4 figs.

Forsberg, C.W.; Beahm, E.C.; Parker, G.W.

1995-04-25T23:59:59.000Z

387

National Synchrotron Light Source annual report 1991  

SciTech Connect (OSTI)

This report discusses the following research conducted at NSLS: atomic and molecular science; energy dispersive diffraction; lithography, microscopy and tomography; nuclear physics; UV photoemission and surface science; x-ray absorption spectroscopy; x-ray scattering and crystallography; x-ray topography; workshop on surface structure; workshop on electronic and chemical phenomena at surfaces; workshop on imaging; UV FEL machine reviews; VUV machine operations; VUV beamline operations; VUV storage ring parameters; x-ray machine operations; x-ray beamline operations; x-ray storage ring parameters; superconducting x-ray lithography source; SXLS storage ring parameters; the accelerator test facility; proposed UV-FEL user facility at the NSLS; global orbit feedback systems; and NSLS computer system.

Hulbert, S.L.; Lazarz, N.M. (eds.)

1992-04-01T23:59:59.000Z

388

Tunable, superconducting, surface-emitting teraherz source  

DOE Patents [OSTI]

A compact, solid-state THz source based on the driven Josephson vortex lattice in a highly anisotropic superconductor such as Bi2Sr2CaCu2O8 that allows cw emission at tunable frequency. A second order metallic Bragg grating is used to achieve impedance matching and to induce surface emission of THz-radiation from a Bi2Sr2CaCu2O8 sample. Steering of the emitted THz beam is accomplished by tuning the Josephson vortex spacing around the grating period using a superimposed magnetic control field.

Welp, Ulrich; Koshelev, Alexei E.; Gray, Kenneth E.; Kwok, Wai-Kwong; Vlasko-Vlasov, Vitalii

2010-05-11T23:59:59.000Z

389

Energy Recovery Linacs for Light Source Applications  

SciTech Connect (OSTI)

Energy Recovery Linacs are being considered for applications in present and future light sources. ERLs take advantage of the continuous operation of superconducting rf cavities to accelerate high average current beams with low losses. The electrons can be directed through bends, undulators, and wigglers for high brightness x ray production. They are then decelerated to low energy, recovering power so as to minimize the required rf drive and electrical draw. When this approach is coupled with advanced continuous wave injectors, very high power, ultra-short electron pulse trains of very high brightness can be achieved. This paper will review the status of worldwide programs and discuss the technology challenges to provide such beams for photon production.

George Neil

2011-04-01T23:59:59.000Z

390

DIRECTIONAL DETECTION OF A NEUTRON SOURCE.  

SciTech Connect (OSTI)

Advantages afforded by the development of new directional neutron detectors and imagers are discussed. Thermal neutrons have mean free paths in air of about 20 meters, and can be effectively imaged using coded apertures. Fission spectrum neutrons have ranges greater than 100 meters, and carry enough energy to scatter at least twice in multilayer detectors which can yield both directional and spectral information. Such strategies allow better discrimination between a localized spontaneous fission source and the low, but fluctuating, level of background neutrons generated by cosmic rays. A coded aperture thermal neutron imager will be discussed as well as a proton-recoil double-scatter fast-neutron directional detector with time-of-flight energy discrimination.

VANIER, P.E.; FORMAN, L.

2006-10-23T23:59:59.000Z

391

SPALLATION NEUTRON SOURCE BEAM CURRENT MONITOR ELECTRONICS.  

SciTech Connect (OSTI)

The Spallation Neutron Source (SNS) to be constructed at ORNL is a collaboration of six laboratories. Beam current monitors for SNS will be used to monitor H-minus and H-plus beams ranging from the 15 mA (tune-up in the Front End and Linac) to over 60 A fully accumulated in the Ring. The time structure of the beams to be measured range from 645 nsec ''mini'' bunches, at the 1.05 MHz ring revolution rate, to an overall 1 mS long macro pulse. Beam current monitors (BCMs) for SNS have requirements depending upon their location within the system. The development of a general approach to satisfy requirements of various locations with common components is a major design objective. This paper will describe the development of the beam current monitors and electronics.

KESSELMAN, M.

2001-06-18T23:59:59.000Z

392

Compact microwave ion source for industrial applications  

SciTech Connect (OSTI)

A 2.45 GHz microwave ion source for ion implanters has many good properties for industrial application, such as easy maintenance and long lifetime, and it should be compact for budget and space. But, it has a dc current supply for the solenoid and a rf generator for plasma generation. Usually, they are located on high voltage platform because they are electrically connected with beam extraction power supply. Using permanent magnet solenoid and multi-layer dc break, high voltage deck and high voltage isolation transformer can be eliminated, and the dose rate on targets can be controlled by pulse duty control with semiconductor high voltage switch. Because the beam optics does not change, beam transfer components, such as focusing elements and beam shutter, can be eliminated. It has shown the good performances in budget and space for industrial applications of ion beams.

Cho, Yong-Sub; Kim, Dae-Il; Kim, Han-Sung; Seol, Kyung-Tae; Kwon, Hyeok-Jung; Hong, In-Seok [Proton Engineering Frontier Project, Korea Atomic Energy Research Institute, Daejeon 305-353 (Korea, Republic of)

2012-02-15T23:59:59.000Z

393

X-ray source for mammography  

DOE Patents [OSTI]

An x-ray source utilizing anode material which shifts the output spectrum to higher energy and thereby obtains higher penetrating ability for screening mammography application, than the currently utilized anode material. The currently used anode material (molybdenum) produces an energy x-ray spectrum of 17.5/19.6 keV, which using the anode material of this invention (e.g. silver, rhodium, and tungsten) the x-ray spectrum would be in the 20-35 keV region. Thus, the anode material of this invention provides for imaging of breasts with higher than average x-ray opacity without increase of the radiation dose, and thus reduces the risk of induced breast cancer due to the radiation dose administered for mammograms.

Logan, Clinton M. (Pleasanton, CA)

1994-01-01T23:59:59.000Z

394

Light source employing laser-produced plasma  

DOE Patents [OSTI]

A system and a method of generating radiation and/or particle emissions are disclosed. In at least some embodiments, the system includes at least one laser source that generates a first pulse and a second pulse in temporal succession, and a target, where the target (or at least a portion the target) becomes a plasma upon being exposed to the first pulse. The plasma expand after the exposure to the first pulse, the expanded plasma is then exposed to the second pulse, and at least one of a radiation emission and a particle emission occurs after the exposure to the second pulse. In at least some embodiments, the target is a solid piece of material, and/or a time period between the first and second pulses is less than 1 microsecond (e.g., 840 ns).

Tao, Yezheng; Tillack, Mark S

2013-09-17T23:59:59.000Z

395

The new RF sources for accelerators  

SciTech Connect (OSTI)

Several new RF sources are being developed for accelerator and collider applications. Assembly is nearing completion of a multiple beam inductive output tube at 352 MHz. An annular beam klystron is being developed to produce 10 MW pulses at 1.3 GHz. The annular beam approach provides significant cost reduction over similar multiple beam devices. Fabrication is underway on a 10 kW, periodic permanent magnet klystron at 2.815 GHz. Permanent magnets eliminate the solenoid and associated power supplies and cooling requirements to reduce operational cost. Investigations are beginning on a novel approach for driving accelerator cavities using pulse shaping to increase coupling efficiency and dramatically reduce RF power requirements.

Ives, Lawrence; Read, Michael; Ferguson, Patrick; Marsden, David; Collins, George; Jackson, R. H.; Bui, Thuc; Kimura, Takuji; Eisen, Edward [Calabazas Creek Research, Inc., 690 Port Drive, San Mateo, CA, 94404, (650) 312-9575 (United States); Communications and Power Industries, LLC., 811 Hansen Way, Palo Alto, CA94304 (United States)

2012-12-21T23:59:59.000Z

396

Fingerprints of Disorder Source in Graphene  

E-Print Network [OSTI]

We present a systematic study of the electronic, transport and optical properties of disordered graphene including the next-nearest-neighbor hopping. We show that this hopping has a non-negligible effect on resonant scattering but is of minor importance for long-range disorder such as charged impurities, random potentials or hoppings induced by strain fluctuations. Different types of disorder can be recognized by their fingerprints appearing in the dc conductivity, carrier mobility, optical spectroscopy and Landau level spectrum. By matching our calculations to the experimental observations, we conclude that the long-range disorder potential induced by strain is the most important source of disorder in high-quality graphene on a substrate.

Zhao, Pei-liang; Katsnelson, M I; De Raedt, H

2015-01-01T23:59:59.000Z

397

Plasma-based EUV light source  

DOE Patents [OSTI]

Various mechanisms are provided relating to plasma-based light source that may be used for lithography as well as other applications. For example, a device is disclosed for producing extreme ultraviolet (EUV) light based on a sheared plasma flow. The device can produce a plasma pinch that can last several orders of magnitude longer than what is typically sustained in a Z-pinch, thus enabling the device to provide more power output than what has been hitherto predicted in theory or attained in practice. Such power output may be used in a lithography system for manufacturing integrated circuits, enabling the use of EUV wavelengths on the order of about 13.5 nm. Lastly, the process of manufacturing such a plasma pinch is discussed, where the process includes providing a sheared flow of plasma in order to stabilize it for long periods of time.

Shumlak, Uri (Seattle, WA); Golingo, Raymond (Seattle, WA); Nelson, Brian A. (Mountlake Terrace, WA)

2010-11-02T23:59:59.000Z

398

Core-melt source reduction system  

DOE Patents [OSTI]

A core-melt source reduction system for ending the progression of a molten core during a core-melt accident and resulting in a stable solid cool matrix. The system includes alternating layers of a core debris absorbing material and a barrier material. The core debris absorbing material serves to react with and absorb the molten core such that containment overpressurization and/or failure does not occur. The barrier material slows the progression of the molten core debris through the system such that the molten core has sufficient time to react with the core absorbing material. The system includes a provision for cooling the glass/molten core mass after the reaction such that a stable solid cool matrix results.

Forsberg, Charles W. (Oak Ridge, TN); Beahm, Edward C. (Oak Ridge, TN); Parker, George W. (Concord, TN)

1995-01-01T23:59:59.000Z

399

X-ray source for mammography  

DOE Patents [OSTI]

An x-ray source is described utilizing anode material which shifts the output spectrum to higher energy and thereby obtains higher penetrating ability for screening mammography application, than the currently utilized anode material. The currently used anode material (molybdenum) produces an energy x-ray spectrum of 17.5/19.6 keV, which using the anode material of this invention (e.g. silver, rhodium, and tungsten) the x-ray spectrum would be in the 20-35 keV region. Thus, the anode material of this invention provides for imaging of breasts with higher than average x-ray opacity without increase of the radiation dose, and thus reduces the risk of induced breast cancer due to the radiation dose administered for mammograms. 6 figures.

Logan, C.M.

1994-12-20T23:59:59.000Z

400

Effective Source-to-Source Outlining to Support Whole Program Empirical Optimization  

SciTech Connect (OSTI)

Although automated empirical performance optimization and tuning is well-studied for kernels and domain-specific libraries, a current research grand challenge is how to extend these methodologies and tools to significantly larger sequential and parallel applications. In this context, we present the ROSE source-to-source outliner, which addresses the problem of extracting tunable kernels out of whole programs, thereby helping to convert the challenging whole-program tuning problem into a set of more manageable kernel tuning tasks. Our outliner aims to handle large scale C/C++, Fortran and OpenMP applications. A set of program analysis and transformation techniques are utilized to enhance the portability, scalability, and interoperability of source-to-source outlining. More importantly, the generated kernels preserve performance characteristics of tuning targets and can be easily handled by other tools. Preliminary evaluations have shown that the ROSE outliner serves as a key component within an end-to-end empirical optimization system and enables a wide range of sequential and parallel optimization opportunities.

Liao, C; Quinlan, D J; Vuduc, R; Panas, T

2009-07-17T23:59:59.000Z

Note: This page contains sample records for the topic "addressee source pm-o" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Improved design of proton source and low energy beam transport line for European Spallation Source  

SciTech Connect (OSTI)

The design update of the European Spallation Source (ESS) accelerator is almost complete and the construction of the prototype of the microwave discharge ion source able to provide a proton beam current larger than 70 mA to the 3.6 MeV Radio Frequency Quadrupole (RFQ) started. The source named PS-ESS (Proton Source for ESS) was designed with a flexible magnetic system and an extraction system able to merge conservative solutions with significant advances. The ESS injector has taken advantage of recent theoretical updates and new plasma diagnostics tools developed at INFN-LNS (Laboratori Nazionali del Sud, Istituto Nazionale di Fisica Nucleare). The design strategy considers the PS-ESS and the low energy beam transport line as a whole, where the proton beam behaves like an almost neutralized non-thermalized plasma. Innovative solutions have been used as hereinafter described. Thermo-mechanical optimization has been performed to withstand the chopped beam and the misaligned focused beam over the RFQ input collimator; the results are reported here.

Neri, L., E-mail: neri@lns.infn.it; Celona, L.; Gammino, S.; Mascali, D.; Castro, G.; Ciavola, G. [Laboratori Nazionali del Sud, Istituto Nazionale di Fisica Nucleare, Via S. Sofia 62, 95123 Catania (Italy)] [Laboratori Nazionali del Sud, Istituto Nazionale di Fisica Nucleare, Via S. Sofia 62, 95123 Catania (Italy); Torrisi, G. [Laboratori Nazionali del Sud, Istituto Nazionale di Fisica Nucleare, Via S. Sofia 62, 95123 Catania (Italy) [Laboratori Nazionali del Sud, Istituto Nazionale di Fisica Nucleare, Via S. Sofia 62, 95123 Catania (Italy); Dipartimento di Ingegneria dellíInformazione, delle Infrastrutture e dellíEnergia Sostenibile, Universitŗ Mediterranea di Reggio Calabria, Via Graziella, 89122 Reggio Calabria (Italy); Cheymol, B.; Ponton, A. [European Spallation Source ESS AB, Lund (Sweden)] [European Spallation Source ESS AB, Lund (Sweden); Galatŗ, A. [Laboratori Nazionali di Legnaro, Istituto Nazionale di Fisica Nucleare, Viale dell'universitŗ 2, 35020 Legnaro (Italy)] [Laboratori Nazionali di Legnaro, Istituto Nazionale di Fisica Nucleare, Viale dell'universitŗ 2, 35020 Legnaro (Italy); Patti, G. [Laboratori Nazionali del Sud, Istituto Nazionale di Fisica Nucleare, Via S. Sofia 62, 95123 Catania (Italy) [Laboratori Nazionali del Sud, Istituto Nazionale di Fisica Nucleare, Via S. Sofia 62, 95123 Catania (Italy); Laboratori Nazionali di Legnaro, Istituto Nazionale di Fisica Nucleare, Viale dell'universitŗ 2, 35020 Legnaro (Italy); Gozzo, A.; Lega, L. [Laboratori Nazionali del Sud, Istituto Nazionale di Fisica Nucleare, Via S. Sofia 62, 95123 Catania (Italy) [Laboratori Nazionali del Sud, Istituto Nazionale di Fisica Nucleare, Via S. Sofia 62, 95123 Catania (Italy); Dipartimento di Ingegneria Informatica e delle Telecomunicazioni, Universitŗ degli Studi di Catania, Viale Andrea Doria 6, 95123 Catania (Italy)

2014-02-15T23:59:59.000Z

402

Infrasound source location An automated method to estimate the location of infrasound sources  

E-Print Network [OSTI]

Waterstaat Delft University of Technology (DUT) Department of Earth Observation and Space Systems Acoustic Meteorologisch Instituut (KNMI) and three additional arrays located in Germany and France. The estimated source for a spherical earth. Extensive filtering is applied to clean the data from as much noise and signals from local

Evers, Läslo G.

403

Kuwaiti oil fires: Composition of source smoke  

SciTech Connect (OSTI)

While the Kuwaiti oil-fire smoke plumes manifested a pronounced impact on solar radiation in the Gulf region (visibility, surface temperatures, etc.), smoke plume concentrations of combustion-generated pollutants suggest that the overall chemical impact on the atmosphere of the smoke from these fires was probably much less than anticipated. Combustion in the Kuwaiti oil fires was surprisingly efficient, releasing on average more than 93% of the combusted hydrocarbon fuels as carbon dioxide (CO{sub 2}). Correspondingly, combustion-produced quantities of carbon monoxide (CO) and carbonaceous particles were low, each {approximately} 2% by weight. The fraction of methane (CH{sub 4}) produced by the fires was also relatively low ({approximately} 0.2%), but source emissions of nonmethane hydrocarbons were high ({approximately} 2%). Processes other than combustion (e.g., volatilization) probably contributed significantly to the measured in-plume hydrocarbon concentrations. Substantially, different elemental to organic carbon ratios were obtained for aerosol particles from several different types of fires/smokes. Sulfur emissions (particulate and gaseous) measured at the source fires were lower ({approximately} 0.5%) than predicted based on average sulfur contents in the crude. Sulfur dioxide measurements (SO{sub 2}) reported herein, however, were both limited in actual number and in the number of well fires sampled. Nitrous oxide (N{sub 2}O) emissions from the Kuwaiti oil fires were very low and often could not be distinguished from background concentrations. About 25-30% of the fires produced white smoke plumes that were found to be highly enriched in sodium and calcium chlorides. 18 refs., 1 fig., 4 tabs.

Cofer, W.R. III; Cahoon, D.R. [Langley Research Center, Hampton, VA (United States); Stevens, R.K.; Pinto, J.P. [Environmental Protection Agency, Research Triangle Park, NC (United States); Winstead, E.L.; Sebacher, D.I. [Hughes STX Corp., Hampton, VA (United States); Abdulraheem, M.Y. [Kuwait Environmental Protection Dept., Kuwait City (Kuwait); Al-Sahafi, M. [Ministry of Defense and Aviation, Eastern Province (Saudi Arabia); Mazurek, M.A. [Brookhaven National Lab., Upton, NY (United States); Rasmussen, R.A. [Oregon Graduate Institute of Science and Technology, Beaverton, OR (United States)] [and others

1992-09-20T23:59:59.000Z

404

Tunable infrared source employing Raman mixing  

DOE Patents [OSTI]

A tunable source of infrared radiation is obtained by irradiating an assemblage of Raman active gaseous atoms or molecules with a high intensity pumping beam of coherent radiation at a pump frequency .omega..sub.p to stimulate the generation of Stokes wave energy at a Stokes frequency .omega..sub.s and to stimulate the Raman resonant mode at the Raman mode frequency .omega..sub.R within the irradiated assemblage where the pump frequency .omega..sub.p minus the Stokes frequency .omega..sub.s is equal to the Raman mode frequency .omega..sub.R. The stimulated assemblage is irradiated with a tunable source of coherent radiation at a frequency .omega..sub.i to generate the output infrared radiation of the frequency .omega..sub.0 which is related to the Raman mode frequency .omega..sub.R and the input wave .omega..sub.i by the relation .omega..sub.0 =.omega..sub.i .+-..omega..sub.R. In one embodiment the interaction between the pump wave energy .omega..sub.p and the tunable input wave energy .omega..sub.i is collinear and the ratio of the phase velocity mismatch factor .DELTA.k to the electric field exponential gain coefficient T is within the range of 0.1 to 5. In another embodiment the pump wave energy .omega..sub.p and the tunable input wave energy .omega..sub.i have velocity vectors k.sub.p and k.sub.i which cross at an angle to each other to compensate for phase velocity mismatches in the medium. In another embodiment, the Stokes wave energy .omega..sub.s is generated by pump energy .omega..sub.p in a first Raman cell and .omega..sub.s, .omega..sub.i and .omega..sub.p are combined in a second Raman mixing cell to produce the output at .omega..sub.i.

Byer, Robert L. (Stanford, CA); Herbst, Richard L. (Menlo Park, CA)

1980-01-01T23:59:59.000Z

405

Chapter 2: Sources and Deposition of Trace Metals 2.1 Main Sources of Atmospheric Pollution...............................................7  

E-Print Network [OSTI]

5 Chapter 2: Sources and Deposition of Trace Metals 2.1 Main Sources of Atmospheric Pollution distances causing regional or global pollution. Fig. 2.1: Sources of trace metals in the environment. Contamination of the atmosphere by pollutant trace metals affects the environment directly through its impact

Short, Daniel

406

Topic Sensitive SourceRank: Extending SourceRank for Performing Context-Sensitive Search over Deep Web  

E-Print Network [OSTI]

of the foremost challenges for searching deep-web. For a user query, source selection involves selecting a subset of deep-web sources expected to provide relevant answers to the user query. Existing source selection, given the autonomous and uncurated nature of deep-web, have be- come indispensible for searching deep-web

Kambhampati, Subbarao

407

Physics design of a cold neutron source for KIPT neutron source facility.  

SciTech Connect (OSTI)

Argonne National Laboratory (ANL) of USA and Kharkov Institute of Physics and Technology (KIPT) of Ukraine have been collaborating on the conceptual design development of a neutron source facility. It is based on the use of an electron accelerator driven subcritical (ADS) facility with low enriched uranium fuel, using the existing electron accelerators at KIPT of Ukraine [1]. The neutron source of the subcritical assembly is generated from the interaction of 100-KW electron beam, which has a uniform spatial distribution and the electron energy in the range of 100 to 200 MeV, with a natural uranium target [2]. The main functions of the facility are the production of medical isotopes and the support of the Ukraine nuclear power industry. Neutron beam experiments and material studies are also included. Over the past two-three decades, structures with characteristic lengths of 100 {angstrom} and correspondingly smaller vibrational energies have become increasingly important for both science and technology [3]. The characteristic dimensions of the microstructures can be well matched by neutrons with longer vibrational wavelength and lower energy. In the accelerator-driven subcritical facility, most of the neutrons are generated from fission reactions with energy in the MeV range. They are slowed down to the meV energy range through scattering reactions in the moderator and reflector materials. However, the fraction of neutrons with energies less than 5 meV in a normal moderator spectrum is very low because of up-scattering caused by the thermal motion of moderator or reflector molecules. In order to obtain neutrons with energy less than 5 meV, cryogenically cooled moderators 'cold neutron sources' should be used to slow down the neutrons. These cold moderators shift the neutron energy spectrum down because the thermal motion of moderator molecules as well as the up-scattering is very small, which provides large gains in intensity of low energy neutrons, E < 5 meV. The accelerator driven subcritical facility is designed with a provision to add a cryogenically cooled moderator system. This cold neutron source could provide the neutrons beams with lower energy, which could be utilized in scattering experiment and material structures analysis. This study describes the performed physics analyses to define and characterize the cold neutron source of the KIPT neutron source facility. The cold neutron source is designed to optimize the cold neutron brightness to the experimental instruments outside the radial heavy concrete shield of the facility. Liquid hydrogen or solid methane with 20 K temperature is used as a cold moderator. Monte Carlo computer code MCNPX [4], with ENDF/B-VI nuclear data libraries, is utilized to calculate the cold neutron source performance and estimate the nuclear heat load to the cold moderator. The surface source generation capability of MCNPX code has been used to provide the possibility of analyzing different design configurations and perform design optimization analyses with reasonable computer resources. Several design configurations were analyzed and their performance were characterized and optimized.

Zhong, Z.; Gohar, Y.; Kellogg, R.; Nuclear Engineering Division

2009-02-17T23:59:59.000Z

408

Multiple source/multiple target fluid transfer apparatus  

DOE Patents [OSTI]

A fluid transfer apparatus includes: a) a plurality of orifices for connection with fluid sources; b) a plurality of orifices for connection with fluid targets; c) a set of fluid source conduits and fluid target conduits associated with the orifices; d) a pump fluidically interposed between the source and target conduits to transfer fluid therebetween; e) a purge gas conduit in fluid communication with the fluid source conduits, fluid target conduits and pump to receive and pass a purge gas under pressure; f) a solvent conduit in fluid communication with the fluid source conduits, fluid target conduits and pump to receive and pass solvent, the solvent conduit including a solvent valve; g) pump control means for controlling operation of the pump; h) purge gas valve control means for controlling operation of the purge gas valve to selectively impart flow of purge gas to the fluid source conduits, fluid target conduits and pump; i) solvent valve control means for controlling operation of the solvent valve to selectively impart flow of solvent to the fluid source conduits, fluid target conduits and pump; and j) source and target valve control means for controlling operation of the fluid source conduit valves and the fluid target conduit valves to selectively impart passage of fluid between a selected one of the fluid source conduits and a selected one of the fluid target conduits through the pump and to enable passage of solvent or purge gas through selected fluid source conduits and selected fluid target conduits.

Turner, Terry D. (Idaho Falls, ID)

1997-01-01T23:59:59.000Z

409

Multiple source/multiple target fluid transfer apparatus  

DOE Patents [OSTI]

A fluid transfer apparatus includes: (a) a plurality of orifices for connection with fluid sources; (b) a plurality of orifices for connection with fluid targets; (c) a set of fluid source conduits and fluid target conduits associated with the orifices; (d) a pump fluidically interposed between the source and target conduits to transfer fluid there between; (e) a purge gas conduit in fluid communication with the fluid source conduits, fluid target conduits and pump to receive and pass a purge gas under pressure; (f) a solvent conduit in fluid communication with the fluid source conduits, fluid target conduits and pump to receive and pass solvent, the solvent conduit including a solvent valve; (g) pump control means for controlling operation of the pump; (h) purge gas valve control means for controlling operation of the purge gas valve to selectively impart flow of purge gas to the fluid source conduits, fluid target conduits and pump; (i) solvent valve control means for controlling operation of the solvent valve to selectively impart flow of solvent to the fluid source conduits, fluid target conduits and pump; and (j) source and target valve control means for controlling operation of the fluid source conduit valves and the fluid target conduit valves to selectively impart passage of fluid between a selected one of the fluid source conduits and a selected one of the fluid target conduits through the pump and to enable passage of solvent or purge gas through selected fluid source conduits and selected fluid target conduits. 6 figs.

Turner, T.D.

1997-08-26T23:59:59.000Z

410

FIVE-YEAR WILKINSON MICROWAVE ANISOTROPY PROBE OBSERVATIONS: SOURCE CATALOG  

SciTech Connect (OSTI)

We present the list of point sources found in the Wilkinson Microwave Anisotropy Probe (WMAP) five-year maps. The technique used in the first-year and three-year analyses now finds 390 point sources, and the five-year source catalog is complete for regions of the sky away from the Galactic plane to a 2 Jy limit, with SNR >4.7 in all bands in the least covered parts of the sky. The noise at high frequencies is still mainly radiometer noise, but at low frequencies the cosmic microwave background (CMB) anisotropy is the largest uncertainty. A separate search of CMB-free V-W maps finds 99 sources of which all but one can be identified with known radio sources. The sources seen by WMAP are not strongly polarized. Many of the WMAP sources show significant variability from year to year, with more than a 2:1 range between the minimum and maximum fluxes.

Wright, E. L.; Chen, X. [UCLA Physics and Astronomy, P.O. Box 951547, Los Angeles, CA 90095-1547 (United States); Odegard, N.; Hill, R. S.; Weiland, J. L. [Adnet Systems, Inc., 7515 Mission Dr., Suite A100, Lanham, MD 20706 (United States); Bennett, C. L.; Gold, B.; Larson, D. [Department of Physics and Astronomy, Johns Hopkins University, 3400 N. Charles St., Baltimore, MD 21218-2686 (United States); Hinshaw, G.; Wollack, E.; Kogut, A. [Code 665, NASA/Goddard Space Flight Center, Greenbelt, MD 20771 (United States); Jarosik, N.; Page, L.; Dunkley, J. [Department of Physics, Jadwin Hall, Princeton University, Princeton, NJ 08544-0708 (United States); Komatsu, E. [Department of Astronomy, University of Texas, Austin, 2511 Speedway, RLM 15.306, Austin, TX 78712 (United States); Nolta, M. R. [Canadian Institute for Theoretical Astrophysics, University of Toronto, 60 St. George St., Toronto, ON M5S 3H8 (Canada); Spergel, D. N. [Department of Astrophysical Sciences, Peyton Hall, Princeton University, Princeton, NJ 08544-1001 (United States); Halpern, M. [Department of Physics and Astronomy, University of British Columbia, Vancouver, BC V6T 1Z1 (Canada); Limon, M. [Columbia Astrophysics Laboratory, 550 W. 120th St., Mail Code 5247, New York, NY 10027-6902 (United States); Meyer, S. S. [Departments of Astrophysics and Physics, KICP and EFI, University of Chicago, Chicago, IL 60637 (United States)], E-mail: wright@astro.ucla.edu (and others)

2009-02-15T23:59:59.000Z

411

A Statistical Framework for Microbial Source Attribution  

SciTech Connect (OSTI)

This report presents a general approach to inferring transmission and source relationships among microbial isolates from their genetic sequences. The outbreak transmission graph (also called the transmission tree or transmission network) is the fundamental structure which determines the statistical distributions relevant to source attribution. The nodes of this graph are infected individuals or aggregated sub-populations of individuals in which transmitted bacteria or viruses undergo clonal expansion, leading to a genetically heterogeneous population. Each edge of the graph represents a transmission event in which one or a small number of bacteria or virions infects another node thus increasing the size of the transmission network. Recombination and re-assortment events originate in nodes which are common to two distinct networks. In order to calculate the probability that one node was infected by another, given the observed genetic sequences of microbial isolates sampled from them, we require two fundamental probability distributions. The first is the probability of obtaining the observed mutational differences between two isolates given that they are separated by M steps in a transmission network. The second is the probability that two nodes sampled randomly from an outbreak transmission network are separated by M transmission events. We show how these distributions can be obtained from the genetic sequences of isolates obtained by sampling from past outbreaks combined with data from contact tracing studies. Realistic examples are drawn from the SARS outbreak of 2003, the FMDV outbreak in Great Britain in 2001, and HIV transmission cases. The likelihood estimators derived in this report, and the underlying probability distribution functions required to calculate them possess certain compelling general properties in the context of microbial forensics. These include the ability to quantify the significance of a sequence 'match' or 'mismatch' between two isolates; the ability to capture non-intuitive effects of network structure on inferential power, including the 'small world' effect; the insensitivity of inferences to uncertainties in the underlying distributions; and the concept of rescaling, i.e. ability to collapse sub-networks into single nodes and examine transmission inferences on the rescaled network.

Velsko, S P; Allen, J E; Cunningham, C T

2009-04-28T23:59:59.000Z

412

Submillimetre sources in rich cluster fields - source counts, redshift estimates, and cooling flow limits  

E-Print Network [OSTI]

Recent submillimetre surveys have revealed a population of dusty, high redshift sources of great cosmological significance for understanding dust-enshrouded star formation in distant galaxies, and for determining the origin of the far-IR background. In this paper, we analyze nine rich cluster fields mapped at 850 and 450 microns with the SCUBA array on the James Clerk Maxwell telescope. Lensing models of the clusters are developed in order to derive accurate source counts for our sample. VLA maps of the same clusters are used to help constrain the redshift distribution of our SCUBA detections. Implications for high redshift galaxies and for the far-IR background are discussed. We also provide limits on distributed dust produced by cooling flows in these clusters.

Scott C. Chapman; Douglas Scott; Colin Borys; Gregory G. Fahlman

2000-09-05T23:59:59.000Z

413

Schwarz method for earthquake source dynamics  

SciTech Connect (OSTI)

Dynamic faulting under slip-dependent friction in a linear elastic domain (in-plane and 3D configurations) is considered. The use of an implicit time-stepping scheme (Newmark method) allows much larger values of the time step than the critical CFL time step, and higher accuracy to handle the non-smoothness of the interface constitutive law (slip weakening friction). The finite element form of the quasi-variational inequality is solved by a Schwarz domain decomposition method, by separating the inner nodes of the domain from the nodes on the fault. In this way, the quasi-variational inequality splits into two subproblems. The first one is a large linear system of equations, and its unknowns are related to the mesh nodes of the first subdomain (i.e. lying inside the domain). The unknowns of the second subproblem are the degrees of freedom of the mesh nodes of the second subdomain (i.e. lying on the domain boundary where the conditions of contact and friction are imposed). This nonlinear subproblem is solved by the same Schwarz algorithm, leading to some local nonlinear subproblems of a very small size. Numerical experiments are performed to illustrate convergence in time and space, instability capturing, energy dissipation and the influence of normal stress variations. We have used the proposed numerical method to compute source dynamics phenomena on complex and realistic 2D fault models (branched fault systems)

Badea, Lori [Institute of Mathematics of the Romanian Academy, P.O. Box 1-764, RO 014700 Bucharest (Romania)], E-mail: Lori.Badea@imar.ro; Ionescu, Ioan R. [Laboratoire de Mathematiques, Universite de Savoie, Campus Scientifique, 73376 Le Bourget-du-Lac Cedex (France)], E-mail: ionescu@univ-savoie.fr; Wolf, Sylvie [Laboratoire de Mathematiques, Universite de Savoie, Campus Scientifique, 73376 Le Bourget-du-Lac Cedex (France)], E-mail: sylvie.wolf@free.fr

2008-04-01T23:59:59.000Z

414

Blind Source Separation For Ion Mobility Spectra  

SciTech Connect (OSTI)

Miniaturization is a powerful trend for smart chemical instrumentation in a diversity of applications. It is know that miniaturization in IMS leads to a degradation of the system characteristics. For the present work, we are interested in signal processing solutions to mitigate limitations introduced by limited drift tube length that basically involve a loss of chemical selectivity. While blind source separation techniques (BSS) are popular in other domains, their application for smart chemical instrumentation is limited. However, in some conditions, basically linearity, BSS may fully recover the concentration time evolution and the pure spectra with few underlying hypothesis. This is extremely helpful in conditions where non-expected chemical interferents may appear, or unwanted perturbations may pollute the spectra. SIMPLISMA has been advocated by Harrington et al. in several papers. However, more modern methods of BSS for bilinear decomposition with the restriction of positiveness have appeared in the last decade. In order to explore and compare the performances of those methods a series of experiments were performed.

Marco, S.; Pomareda, V. [Department of Electronics, University of Barcelona, C/Marti i Franques, no 1, planta 2, 08028, Barcelona (Spain); Artificial Olfaction Lab, Institute of BioEngineering of Catalonia and Institut de Bioenginyeria de Catalunya (IBEC), C/Baldiri Reixac 13, 08028 Barcelona (Spain); Pardo, A. [Department of Electronics, University of Barcelona, C/Marti i Franques, no 1, planta 2, 08028, Barcelona (Spain); Kessler, M.; Goebel, J.; Mueller, G. [Department LG-SI 2, EADS Innovation Works, EADS Deutschland GmbH and EADS Innovation Works, Dept. IW-SI-Sensors, Electronics and Systems Integration, 81663 Muenchen (Germany)

2009-05-23T23:59:59.000Z

415

Underground Sources of Radioactive Noble Gas  

SciTech Connect (OSTI)

It is well known that radon is present in relatively high concentrations below the surface of the Earth due to natural decay of uranium and thorium. However, less information is available on the background levels of other isotopes such as 133Xe and 131mXe produced via spontaneous fission of either manmade or naturally occurring elements. The background concentrations of radioxenon in the subsurface are important to understand because these isotopes potentially can be used to confirm violations of the Comprehensive Nuclear-Test-Ban Treaty (CTBT) during an On-Site Inspection (OSI). Recently, Pacific Northwest National Laboratory (PNNL) measured radioxenon concentrations from the subsurface at the Nevada Nuclear Security Site (NNSSóformerly known as the Nevada Test Site) to determine whether xenon isotope background levels could be detected from spontaneous fission of naturally occurring uranium or legacy 240Pu as a result of historic nuclear testing. In this paper, we discuss the results of those measurements and review the sources of xenon background that must be taken into account during OSI noble gas measurements.

Hayes, James C.; Bowyer, Ted W.; Cordova, Elsa A.; Kirkham, Randy R.; Misner, Alex C.; Olsen, Khris B.; Woods, Vincent T.; Emer, Dudley

2013-05-01T23:59:59.000Z

416

Improvement of four anode rods ion source  

SciTech Connect (OSTI)

In this work, an improved form of a saddle field ion source has been designed and constructed. It consists of four anode rods made from copper and two copper cathode discs. The two cathode discs are placed symmetrically on both sides of the four anode rods. The electrical discharge and output ion beam characteristics were measured at different pressures using argon gas. The optimum distance between each two anode rods was determined. Also the optimum distance between the four anode rods and any cathode disc was obtained. It was found that the optimum distance between each two anode rods equal to 6 mm, while the optimum distance between the four anode rods and any cathode disc equal to 16 mm, where a stable discharge current and maximum output ion beam current can be obtained. The effect of negative extraction voltage applied to both the extractor electrode and Faraday cup on the output ion beam current was studied. The sputter yield of copper and aluminum targets using argon ions of different energies was determined.

Abdel Salam, F. W.; El-Khabeary, H.; Abdel Reheem, A. M. [Accelerators and Ion Sources Department, Nuclear Research Center, Atomic Energy Authority, P. No. 13759 (Egypt); Ahmed, M. M. [Physics Department, Faculty of Science, Helwan University, Cairo (Egypt)

2011-03-15T23:59:59.000Z

417

Laser Electron Gamma Source. Biennial progress report  

SciTech Connect (OSTI)

The LEGS facility provides intense, polarized, monochromatic {gamma}-ray beams by Compton backscattering laser light from relativistic electrons circulating in the X-Ray storage ring of the National Synchrotron Light Source (NSLS) at Brookhaven National Laboratory. With the start of ring operations at 2.8 GeV, LEGS {gamma}-ray energies now extend to 370 MeV. Considerable progress has been made in the development of a new laser system that will increase the beam energies to 470 MeV, and this system is expected to come into operation before the next biennial report. The total flux is administratively held at 6 {times} 10{sup 6} s{sup {minus}1}. The {gamma}-ray energy is determined, with a resolution of 5.5 MeV, by detecting the scattering electrons in a magnetic spectrometer. This spectrometer can `tag` all {gamma}-rays with energies from 185 MeV up to the Compton edge. The beam spot size at the target position is 8 mm (V) {times} 18 mm (H), FWHM. For a single laser wavelength, the linear polarization of the beam is 98% at the Compton edge and decreases to 50% at about 1/2 the energy of the edge. By choosing the laser wavelengths appropriately the polarization can be maintained above 85% throughout the tagging range. During the last two years, experimental running at LEGS occupied an average of 3000 hours annually. Highlights of some of the programs are discussed below.

Sandorfi, A.M. [ed.; Caracappa, A.; Kuczewski, A.; Kistner, O.C.; Lincoln, F.; Miceli, L.; Thorn, C.E. [Brookhaven National Lab., Upton, NY (United States); Hoblit, S. [Univ. of Virginia, Charlottesville, VA (United States). Dept. of Physics; Khandaker, M. [Brookhaven National Lab., Upton, NY (United States)]|[Virginia Polytechnic Institute & State Univ., Blacksburg, VA (United States). Dept. of Physics

1994-06-01T23:59:59.000Z

418

Plasma wake field XUV radiation source  

DOE Patents [OSTI]

A XUV radiation source uses an interaction of electron beam pulses with a gas to create a plasma radiator. A flowing gas system (10) defines a circulation loop (12) with a device (14), such as a high pressure pump or the like, for circulating the gas. A nozzle or jet (16) produces a sonic atmospheric pressure flow and increases the density of the gas for interacting with an electron beam. An electron beam is formed by a conventional radio frequency (rf) accelerator (26) and electron pulses are conventionally formed by a beam buncher (28). The rf energy is thus converted to electron beam energy, the beam energy is used to create and then thermalize an atmospheric density flowing gas to a fully ionized plasma by interaction of beam pulses with the plasma wake field, and the energetic plasma then loses energy by line radiation at XUV wavelengths Collection and focusing optics (18) are used to collect XUV radiation emitted as line radiation when the high energy density plasma loses energy that was transferred from the electron beam pulses to the plasma.

Prono, Daniel S. (Los Alamos, NM); Jones, Michael E. (Los Alamos, NM)

1997-01-01T23:59:59.000Z

419

TRIGA MARK-II source term  

SciTech Connect (OSTI)

ORIGEN 2.2 are employed to obtain data regarding ? source term and the radio-activity of irradiated TRIGA fuel. The fuel composition are specified in grams for use as input data. Three types of fuel are irradiated in the reactor, each differs from the other in terms of the amount of Uranium compared to the total weight. Each fuel are irradiated for 365 days with 50 days time step. We obtain results on the total radioactivity of the fuel, the composition of activated materials, composition of fission products and the photon spectrum of the burned fuel. We investigate the differences of results using BWR and PWR library for ORIGEN. Finally, we compare the composition of major nuclides after 1 year irradiation of both ORIGEN library with results from WIMS. We found only minor disagreements between the yields of PWR and BWR libraries. In comparison with WIMS, the errors are a little bit more pronounced. To overcome this errors, the irradiation power used in ORIGEN could be increased a little, so that the differences in the yield of ORIGEN and WIMS could be reduced. A more permanent solution is to use a different code altogether to simulate burnup such as DRAGON and ORIGEN-S. The result of this study are essential for the design of radiation shielding from the fuel.

Usang, M. D., E-mail: mark-dennis@nuclearmalaysia.gov.my; Hamzah, N. S., E-mail: mark-dennis@nuclearmalaysia.gov.my; Abi, M. J. B., E-mail: mark-dennis@nuclearmalaysia.gov.my; Rawi, M. Z. M. Rawi, E-mail: mark-dennis@nuclearmalaysia.gov.my; Abu, M. P., E-mail: mark-dennis@nuclearmalaysia.gov.my [Bahagian Teknologi Reaktor, Agensi Nuklear Malaysia, 43000 Kajang (Malaysia)

2014-02-12T23:59:59.000Z

420

A Dipole Assisted IEC Neutron Source  

SciTech Connect (OSTI)

A potential opportunity to enhance Inertial Electrostatic Confinement (IEC) fusion exists by augmenting it with a magnetic dipole configuration. The theory is that the dipole fields will enhance the plasma density in the center region of the IEC and the combined IEC and dipole confinement properties will reduce plasma losses. To demonstrate that a hybrid Dipole-IEC configuration can provide an improved neutron source vs. a stand alone IEC, a first model Dipole-IEC experiment was benchmarked against a reference IEC. A triple Langmuir probe was used to find the electron temperature and density. It was found that the magnetic field increases the electron density by a factor of 16, the electron temperature decreases in the presence of a magnetic field, the discharge voltage decreases in the presence of a magnetic field, the potential of the dipole strongly influences the densities obtained in the center. The experimental set-up and plasma diagnostics are discussed in detail, as well as the results, and the developmental issues.

Prajakti Joshi Shrestha

2005-11-28T23:59:59.000Z

Note: This page contains sample records for the topic "addressee source pm-o" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Cluster of Gamma-ray Bursts - Image of a Source. Catalog of Clusters (Sources) of Gamma-ray Bursts  

E-Print Network [OSTI]

The clusters of gamma-ray bursts are considered which are assumed to be images of the repeated gamma-ray burst (GRB) sources. It is shown, that localization of the cosmic gamma-ray burst sources (GBS) is determined by the clusters of GRBs. About 100 candidates in sources are presented in the form of the catalog, which is compiled relying on the base of the BATSE data up to middle of 2000. Gamma-ray bursts (from 5 to 13) of a cluster that display a source do not coincide in their position. The catalog table containing basic information about the GRB sources yields the possibility to research the GBS properties and their identification. The birth of GRBs in the clusters allows predicting the appearance of GRBs both in time and space. Most general properties of the supposed GRB sources are discussed. An attempt to compile the first GRB source catalog is made.

A. V. Kuznetsov

2001-11-01T23:59:59.000Z

422

Separation of beam and electrons in the spallation neutron source H{sup -} ion source  

SciTech Connect (OSTI)

The Spallation Neutron Source (SNS) requires an ion source producing an H{sup {minus}} beam with a peak current of 35mA at a 6.2 percent duty factor. For the design of this ion source, extracted electrons must be transported and dumped without adversely affecting the H{sup {minus}} beam optics. Two issues are considered: (1) electron containment transport and controlled removal; and (2) first-order H{sup {minus}} beam steering. For electron containment, various magnetic, geometric and electrode biasing configurations are analyzed. A kinetic description for the negative ions and electrons is employed with self-consistent fields obtained from a steady-state solution to Poisson`s equation. Guiding center electron trajectories are used when the gyroradius is sufficiently small. The magnetic fields used to control the transport of the electrons and the asymmetric sheath produced by the gyrating electrons steer the ion beam. Scenarios for correcting this steering by split acceleration and focusing electrodes will be considered in some detail.

Whealton, J.H.; Raridon, R.J. [Oak Ridge National Lab., TN (United States); Leung, K.N. [Lawrence Berkeley National Lab., CA (United States)

1997-12-01T23:59:59.000Z

423

An ideal independent source as an equivalent 1-port  

E-Print Network [OSTI]

We consider a 1-port, not necessarily linear, with a dependent source, appearing at the port. The control of the source is entirely internal for the 1-port. If this source is a parallel voltage source, then the equivalent circuit is an ideal independent voltage source, and if it is a series current source, then the equivalent circuit is an ideal independent current source. (As usual, "ideal" source is defined as a source whose proposed function is independent of the load.) In the simple LTI case, these results can be obtained, respectively, by either taking RTh zero in the Thevenin equivalent, or taking RN infinite in the Norton equivalent; however the very fact that the final circuits do not include any linear elements indicates the possibility of generalization to nonlinear 1-ports. Some limitations on the circuit's structure (functional dependencies in it) are required, and the clearness of these limitations, i.e. clearness of the conditions for the 1-port to be an ideal source for any load, is the aesthetical point.

Emanuel Gluskin; Anatoly Patlakh

2011-08-24T23:59:59.000Z

424

Nuisance Source Population Modeling for Radiation Detection System Analysis  

SciTech Connect (OSTI)

A major challenge facing the prospective deployment of radiation detection systems for homeland security applications is the discrimination of radiological or nuclear 'threat sources' from radioactive, but benign, 'nuisance sources'. Common examples of such nuisance sources include naturally occurring radioactive material (NORM), medical patients who have received radioactive drugs for either diagnostics or treatment, and industrial sources. A sensitive detector that cannot distinguish between 'threat' and 'benign' classes will generate false positives which, if sufficiently frequent, will preclude it from being operationally deployed. In this report, we describe a first-principles physics-based modeling approach that is used to approximate the physical properties and corresponding gamma ray spectral signatures of real nuisance sources. Specific models are proposed for the three nuisance source classes - NORM, medical and industrial. The models can be validated against measured data - that is, energy spectra generated with the model can be compared to actual nuisance source data. We show by example how this is done for NORM and medical sources, using data sets obtained from spectroscopic detector deployments for cargo container screening and urban area traffic screening, respectively. In addition to capturing the range of radioactive signatures of individual nuisance sources, a nuisance source population model must generate sources with a frequency of occurrence consistent with that found in actual movement of goods and people. Measured radiation detection data can indicate these frequencies, but, at present, such data are available only for a very limited set of locations and time periods. In this report, we make more general estimates of frequencies for NORM and medical sources using a range of data sources such as shipping manifests and medical treatment statistics. We also identify potential data sources for industrial source frequencies, but leave the task of estimating these frequencies for future work. Modeling of nuisance source populations is only useful if it helps in understanding detector system performance in real operational environments. Examples of previous studies in which nuisance source models played a key role are briefly discussed. These include screening of in-bound urban traffic and monitoring of shipping containers in transit to U.S. ports.

Sokkappa, P; Lange, D; Nelson, K; Wheeler, R

2009-10-05T23:59:59.000Z

425

Contribution of Source-Sink Theory to Conservation in Protected Areas  

E-Print Network [OSTI]

/Source Source Protected Areas as Sources Vulnerable to Attractive Sinks Natural Condition Land Use Effect >1 1 Protected Area Lambda Source Source Protected Areas as Sources for Harvest Natural Condition Land Use EffectContribution of Source-Sink Theory to Conservation in Protected Areas #12;Newly Recognized Types

Hansen, Andrew J.

426

Voltage balanced multilevel voltage source converter system  

DOE Patents [OSTI]

A voltage balanced multilevel converter for high power AC applications such as adjustable speed motor drives and back-to-back DC intertie of adjacent power systems. This converter provides a multilevel rectifier, a multilevel inverter, and a DC link between the rectifier and the inverter allowing voltage balancing between each of the voltage levels within the multilevel converter. The rectifier is equipped with at least one phase leg and a source input node for each of the phases. The rectifier is further equipped with a plurality of rectifier DC output nodes. The inverter is equipped with at least one phase leg and a load output node for each of the phases. The inverter is further equipped with a plurality of inverter DC input nodes. The DC link is equipped with a plurality of rectifier charging means and a plurality of inverter discharging means. The plurality of rectifier charging means are connected in series with one of the rectifier charging means disposed between and connected in an operable relationship with each adjacent pair of rectifier DC output nodes. The plurality of inverter discharging means are connected in series with one of the inverter discharging means disposed between and connected in an operable relationship with each adjacent pair of inverter DC input nodes. Each of said rectifier DC output nodes are individually electrically connected to the respective inverter DC input nodes. By this means, each of the rectifier DC output nodes and each of the inverter DC input nodes are voltage balanced by the respective charging and discharging of the rectifier charging means and the inverter discharging means.

Peng, Fang Zheng (Oak Ridge, TN); Lai, Jih-Sheng (Knoxville, TN)

1997-01-01T23:59:59.000Z

427

Voltage balanced multilevel voltage source converter system  

DOE Patents [OSTI]

Disclosed is a voltage balanced multilevel converter for high power AC applications such as adjustable speed motor drives and back-to-back DC intertie of adjacent power systems. This converter provides a multilevel rectifier, a multilevel inverter, and a DC link between the rectifier and the inverter allowing voltage balancing between each of the voltage levels within the multilevel converter. The rectifier is equipped with at least one phase leg and a source input node for each of the phases. The rectifier is further equipped with a plurality of rectifier DC output nodes. The inverter is equipped with at least one phase leg and a load output node for each of the phases. The inverter is further equipped with a plurality of inverter DC input nodes. The DC link is equipped with a plurality of rectifier charging means and a plurality of inverter discharging means. The plurality of rectifier charging means are connected in series with one of the rectifier charging means disposed between and connected in an operable relationship with each adjacent pair of rectifier DC output nodes. The plurality of inverter discharging means are connected in series with one of the inverter discharging means disposed between and connected in an operable relationship with each adjacent pair of inverter DC input nodes. Each of said rectifier DC output nodes are individually electrically connected to the respective inverter DC input nodes. By this means, each of the rectifier DC output nodes and each of the inverter DC input nodes are voltage balanced by the respective charging and discharging of the rectifier charging means and the inverter discharging means. 15 figs.

Peng, F.Z.; Lai, J.S.

1997-07-01T23:59:59.000Z

428

Two-Source Extractors Secure Against Quantum Adversaries  

E-Print Network [OSTI]

We initiate the study of multi-source extractors in the quantum world. In this setting, our goal is to extract random bits from two independent weak random sources, on which two quantum adversaries store a bounded amount of information. Our main result is a two-source extractor secure against quantum adversaries, with parameters closely matching the classical case and tight in several instances. Moreover, the extractor is secure even if the adversaries share entanglement. The construction is the Chor-Goldreich [CG88] two-source inner product extractor and its multi-bit variant by Dodis et al. [DEOR04]. Previously, research in this area focused on the construction of seeded extractors secure against quantum adversaries; the multi-source setting poses new challenges, among which is the presence of entanglement that could potentially break the independence of the sources.

Roy Kasher; Julia Kempe

2010-05-04T23:59:59.000Z

429

Materials for cold neutron sources: Cryogenic and irradiation effects  

SciTech Connect (OSTI)

Materials for the construction of cold neutron sources must satisfy a range of demands. The cryogenic temperature and irradiation create a severe environment. Candidate materials are identified and existing cold sources are briefly surveyed to determine which materials may be used. Aluminum- and magnesium-based alloys are the preferred materials. Existing data for the effects of cryogenic temperature and near-ambient irradiation on the mechanical properties of these alloys are briefly reviewed, and the very limited information on the effects of cryogenic irradiation are outlined. Generating mechanical property data under cold source operating conditions is a daunting prospect. It is clear that the cold source material will be degraded by neutron irradiation, and so the cold source must be designed as a brittle vessel. The continued effective operation of many different cold sources at a number of reactors makes it clear that this can be accomplished. 46 refs., 8 figs., 2 tab.

Alexander, D.J.

1990-01-01T23:59:59.000Z

430

A Deep XMM-Newton Survey of M33: Point Source Catalog, Source Detection and Characterization of Overlapping Fields  

E-Print Network [OSTI]

We have obtained a deep 8-field XMM-Newton mosaic of M33 covering the galaxy out to the D$_{25}$ isophote and beyond to a limiting 0.2--4.5 keV unabsorbed flux of 5$\\times$10$^{-16}$ erg cm$^{-2}$ s$^{-1}$ (L${>}$4$\\times$10$^{34}$ erg s$^{-1}$ at the distance of M33). These data allow complete coverage of the galaxy with high sensitivity to soft sources such as diffuse hot gas and supernova remnants. Here we describe the methods we used to identify and characterize 1296 point sources in the 8 fields. We compare our resulting source catalog to the literature, note variable sources, construct hardness ratios, classify soft sources, analyze the source density profile, and measure the X-ray luminosity function. As a result of the large effective area of XMM-Newton below 1 keV, the survey contains many new soft X-ray sources. The radial source density profile and X-ray luminosity function for the sources suggests that only $\\sim$15% of the 391 bright sources with L${>}$3.6$\\times$10$^{35}$ erg s$^{-1}$ are likely...

Williams, Benjamin F; Haberl, Frank; Garofali, Kristen; Blair, William P; Gaetz, Terrance J; Kuntz, K D; Long, Knox S; Pannuti, Thomas G; Pietsch, Wolfgang; Plucinsky, Paul P; Winkler, P Frank

2015-01-01T23:59:59.000Z

431

Advanced Neutron Source (ANS) Project Progress report, FY 1991  

SciTech Connect (OSTI)

This report discusses the following about the Advanced Neutron Source: Project Management; Research and Development; Fuel Development; Corrosion Loop Tests and Analyses; Thermal-Hydraulic Loop Tests; Reactor Control and Shutdown Concepts; Critical and Subcritical Experiments; Material Data, Structural Tests, and Analysis; Cold-Source Development; Beam Tube, Guide, and Instrument Development; Hot-Source Development; Neutron Transport and Shielding; I & C Research and Development; Design; and Safety.

Campbell, J.H. [ed.] [Oak Ridge National Lab., TN (United States); Selby, D.L.; Harrington, R.M. [Oak Ridge National Lab., TN (United States); Thompson, P.B. [Martin Marietta Energy Systems, Inc., (United States). Engineering Division

1992-01-01T23:59:59.000Z

432

Advanced Neutron Source (ANS) Project Progress report, FY 1991  

SciTech Connect (OSTI)

This report discusses the following about the Advanced Neutron Source: Project Management; Research and Development; Fuel Development; Corrosion Loop Tests and Analyses; Thermal-Hydraulic Loop Tests; Reactor Control and Shutdown Concepts; Critical and Subcritical Experiments; Material Data, Structural Tests, and Analysis; Cold-Source Development; Beam Tube, Guide, and Instrument Development; Hot-Source Development; Neutron Transport and Shielding; I C Research and Development; Design; and Safety.

Campbell, J.H. (ed.) (Oak Ridge National Lab., TN (United States)); Selby, D.L.; Harrington, R.M. (Oak Ridge National Lab., TN (United States)); Thompson, P.B. (Martin Marietta Energy Systems, Inc., (United States). Engineering Division)

1992-01-01T23:59:59.000Z

433

Calibration of a DSSSD detector with radioactive sources  

SciTech Connect (OSTI)

The energy calibration of a DSSSD is carried out with the spectra produced by a {sup 207}Bi conversion electron source, a {sup 137}Cs gamma source and a {sup 239}Pu/{sup 241}Am/{sup 244}Cm triple alpha source, as well as employing a precision pulse generator in the whole dynamic range. Multiplicity and coincidence of signals in different strips for the same event are also studied.

Guadilla, V.; Tain, J. L.; Agramunt, J.; Algora, A.; Domingo-Pardo, C.; Rubio, B. [Instituto de Fisica Corpuscular, C.S.I.C.-Univ. Valencia, Ap 22085, E-46071, Valencia (Spain)

2013-06-10T23:59:59.000Z

434

Where are the binary source galactic microlensing events?  

E-Print Network [OSTI]

Though there have been some galactic microlensing events which show a clear signature of a binary lens, no event has yet been claimed as due to lensing of a binary source. Here I argue that this may be due to the fact that most of the binary source events show light curves which can be fitted with the simpler model of a blended single source.

M. Dominik

1998-01-13T23:59:59.000Z

435

Point Source Discharges to Surface Waters (North Carolina)  

Broader source: Energy.gov [DOE]

This rule requires permits for control of sources of water pollution by providing the requirements and procedures for application and issuance of state National Pollutant Discharge Elimination...

436

Integration of Novel Flux Coupling Motor and Current Source Inverter...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

of Novel Flux Coupling Motor and Current Source Inverter Novel Flux Coupling Machine without Permanent Magnets John Hsu, Oak Ridge National Laboratory, Flux Coupling...

437

asian dust source: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Natural dust sources globally account for 75 % of emissions; anthropogenic, 25%. North Africa accounts for 55 % of global dust emissions with only 8% being anthropogenic,...

438

Hybrid Ground Source System Analysis and Tool Development  

Broader source: Energy.gov (indexed) [DOE]

Development Principal Investigator Scott Hackel, Energy Center of Wisconsin Ground Source Heat Pumps Demonstration Projects May 18, 2010 This presentation does not contain any...

439

Covered Product Category: Residential Air-Source Heat Pumps  

Broader source: Energy.gov [DOE]

The Federal Energy Management Program (FEMP) provides acquisition guidance for residential air-source heat pumps, which is an ENERGY STAR-qualified product category.

440

A Test Stand for Ion Sources of Ultimate Reliability  

SciTech Connect (OSTI)

The rationale behind the ITUR project is to perform a comparison between different kinds of H{sup -} ion sources using the same beam diagnostics setup. In particular, a direct comparison will be made in terms of the emittance characteristics of Penning Type sources such as those currently in use in the injector for the ISIS (UK) Pulsed Neutron Source and those of volumetric type such as that driving the injector for the ORNL Spallation Neutron Source (TN, U.S.A.). The endeavour here pursued is thus to build an Ion Source Test Stand where virtually any type of source can be tested and its features measured and, thus compared to the results of other sources under the same gauge. It would be possible then to establish a common ground for effectively comparing different ion sources. The long term objectives are thus to contribute towards building compact sources of minimum emittance, maximum performance, high reliability-availability, high percentage of desired particle production, stability and high brightness. The project consortium is lead by Tekniker-IK4 research centre and partners are companies Elytt Energy and Jema Group. The technical viability is guaranteed by the collaboration between the project consortium and several scientific institutions, such the CSIC (Spain), the University of the Basque Country (Spain), ISIS (STFC-UK), SNS (ORNL-USA) and CEA in Saclay (France)

Enparantza, R.; Uriarte, L.; Romano, P.; Alonso, J.; Ariz, I.; Egiraun, M. [Fundacion Tekniker-IK4, Eibar (Spain); Bermejo, F. J.; Etxebarria, V. [University of the Basque Country, Dpt. Electricity and Electronics, Leioa, Spain, and Consejo Superior de Investgaciones Cientificas, Inst. Estructura de la Materia (Spain); Lucas, J. [Elytt Energy, Portugalete (Spain); Del Rio, J. M. [Jema Group, Lasarte (Spain); Letchford, A.; Faircloth, D. [ISIS Accelerator Division, Rutherford Appleton Laboratory, Didcot (United Kingdom); Stockli, M. [Spallation Neutron Source, Oak Ridge National Lab, Oak Ridge (United States)

2009-03-12T23:59:59.000Z

Note: This page contains sample records for the topic "addressee source pm-o" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Large area, surface discharge pumped, vacuum ultraviolet light source  

DOE Patents [OSTI]

Large area, surface discharge pumped, vacuum ultraviolet (VUV) light source is disclosed. A contamination-free VUV light source having a 225 cm{sup 2} emission area in the 240-340 nm region of the electromagnetic spectrum with an average output power in this band of about 2 J/cm{sup 2} at a wall-plug efficiency of approximately 5% is described. Only ceramics and metal parts are employed in this surface discharge source. Because of the contamination-free, high photon energy and flux, and short pulse characteristics of the source, it is suitable for semiconductor and flat panel display material processing. 3 figs.

Sze, R.C.; Quigley, G.P.

1996-12-17T23:59:59.000Z

442

New results in atomic physics at the Advanced Light Source  

SciTech Connect (OSTI)

The Advanced Light Source is the world's first low-energy third-generation synchrotron radiation source. It has been running reliably and exceeding design specifications since it began operation in October 1993. It is available to a wide community of researchers in many scientific fields, including atomic and molecular science and chemistry. Here, new results in atomic physics at the Advanced Light Source demonstrate the opportunities available in atomic and molecular physics at this synchrotron light source. The unprecedented brightness allows experiments with high flux, high spectral resolution, and nearly 100% linear polarization.

Schlachter, A.S.

1995-01-01T23:59:59.000Z

443

Monitoring SERC Technologies óGeothermal/Ground Source Heat Pumps  

Broader source: Energy.gov [DOE]

A webinar by National Renewable Energy Laboratory Project Leader Dave Peterson about Geothermal/Ground Source Heat Pumps and how to properly monitor its installation.

444

July 2013 Most Viewed Documents for Renewable Energy Sources...  

Office of Scientific and Technical Information (OSTI)

2013 Most Viewed Documents for Renewable Energy Sources Science Subject Feed Chapter 11. Heat Exchangers Rafferty, Kevin D.; Culver, Gene (1998) 484 > Environmental Impacts of...

445

April 2013 Most Viewed Documents for Renewable Energy Sources...  

Office of Scientific and Technical Information (OSTI)

2013 Most Viewed Documents for Renewable Energy Sources Science Subject Feed Chapter 11. Heat Exchangers Rafferty, Kevin D.; Culver, Gene (1998) 1252 > Seventh Edition Fuel Cell...

446

Management of Disused Radioactive Sealed Sources in Egypt - 13512  

SciTech Connect (OSTI)

The future safe development of nuclear energy and progressive increasing use of sealed sources in medicine, research, industry and other fields in Egypt depends on the safe and secure management of disused radioactive sealed sources. In the past years have determined the necessity to formulate and apply the integrated management program for radioactive sealed sources to assure harmless and ecological rational management of disused sealed sources in Egypt. The waste management system in Egypt comprises operational and regulatory capabilities. Both of these activities are performed under legislations. The Hot Laboratories and Waste Management Center HLWMC, is considered as a centralized radioactive waste management facility in Egypt by law 7/2010. (authors)

Mohamed, Y.T.; Hasan, M.A.; Lasheen, Y.F. [Hot Laboratories and Waste Management Center, Egyptian Atomic Energy Authority, 11787, Cairo (Egypt)] [Hot Laboratories and Waste Management Center, Egyptian Atomic Energy Authority, 11787, Cairo (Egypt)

2013-07-01T23:59:59.000Z

447

aerosol source identification: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

the performance of the new algorithm1 . I. Introduction Blind identification Reilly, James P. 60 Mid-Infrared Identification of Faint Submillimeter Sources Astrophysics...

448

Electron cyclotron resonance microwave ion sources for thin film processing  

SciTech Connect (OSTI)

Plasmas created by microwave absorption at the electron cyclotron resonance (ECR) are increasingly used for a variety of plasma processes, including both etching and deposition. ECR sources efficiently couple energy to electrons and use magnetic confinement to maximize the probability of an electron creating an ion or free radical in pressure regimes where the mean free path for ionization is comparable to the ECR source dimensions. The general operating principles of ECR sources are discussed with special emphasis on their use for thin film etching. Data on source performance during Cl base etching of Si using an ECR system are presented. 32 refs., 5 figs.

Berry, L.A.; Gorbatkin, S.M.

1990-01-01T23:59:59.000Z

449

Pinpointing America's Geothermal Resources with Open Source Data...  

Broader source: Energy.gov (indexed) [DOE]

National Geothermal Data System is helping researchers and industry developers cultivate geothermal technology applications in energy and direct-use through an open source data...

450

Optimal Ground-Source Heat Pump System Design  

Broader source: Energy.gov (indexed) [DOE]

Ground-Source Heat Pump System Design May 19, 2010 Geothermal Technologies Program 2010 Peer Review ENVIRON International PI : Metin Ozbek Track : GSHP Demonstration Projects This...

451

VOLTTRONTM as an Open Source Platform for Energy Management Applicatio...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Virginia Tech VOLTTRON TM as an Open Source Platform for Energy Management Applications HVAC Controllers Lighting Controllers Lighting circuit(s) Plug load Controllers July 23,...

452

Underwater Lighting by Submerged Lasers and Incandescent Sources  

E-Print Network [OSTI]

and collimated underwater incandescent projector. The laser-collimated underwater incandescent projector used for beamBY SUBMERGED LASERS and Incandescent Sources DESCRIPTIVE

Duntley, Seibert Q

1971-01-01T23:59:59.000Z

453

Policy for Permitting Low-Emitting Sources† (West Virginia)  

Broader source: Energy.gov [DOE]

While this policy alleviates some requirements on low-emitting emission sources, it does not change the policy of requiring applicants to submit reasonable information concerning all potential...

454

Long Plasma Source for Heavy Ion Beam Charge Neutralization  

E-Print Network [OSTI]

neutralizing plasma column the heavy ion beam can focus to aPlasmas are a source of unbound electrons for charge neutralizing intense heavy ion beams to focus

Efthimion, P.C.

2009-01-01T23:59:59.000Z

455

U.S. Energy Information Administration (EIA) - Source  

Gasoline and Diesel Fuel Update (EIA)

also grows rapidly.... Read full section Renewable energy sources lead rise in primary energy consumption.... Read full section Sales of alternative fuel, fuel flexible, and...

456

Alternative Carriers For Remote Renewable Energy Sources Using...  

Open Energy Info (EERE)

Jump to: navigation, search OpenEI Reference LibraryAdd to library Journal Article: Alternative Carriers For Remote Renewable Energy Sources Using Existing Cng Infrastructure...

457

Random matrices with external source and KP $?$ functions  

E-Print Network [OSTI]

In this paper we prove that the partition function in the random matrix model with external source is a KP $\\tau$ function.

Dong Wang

2009-03-29T23:59:59.000Z

458

Discrete KP equation with self-consistent sources  

E-Print Network [OSTI]

We show that the discrete Kadomtsev-Petviashvili (KP) equation with sources obtained recently by the "source generalization" method can be incorporated into the squared eigenfunction symmetry extension procedure. Moreover, using the known correspondence between Darboux-type transformations and additional independent variables, we demonstrate that the equation with sources can be derived from Hirota's discrete KP equations but in a space of higher dimension. In this way we uncover the origin of the source terms as coming from multidimensional consistency of the Hirota system itself.

Adam Doliwa; Runliang Lin

2014-04-05T23:59:59.000Z

459

Propane cold neutron source: creation and operation experience  

SciTech Connect (OSTI)

In most cold neutron sources, utilized until recently, liquid hydrogen, liquid deuterium and their mixtures were used as a moderating medium. The sources with the liquid hydrogen moderator offer the most specific effectiveness of cold neutron generation. But they are complicated in design, require special safety measures in the course of operation and are very expensive. In this connection, it is of undoubted interest to create a source which, although it yields the specific generation of cold neutrons comparable to the liquid hydrogen one, is safer in operation and simple in design. We assume such a source may be one which uses as a moderator liquid propane cooled to liquid nitrogen temperature.

Zemlyanov, M. G.

1997-09-01T23:59:59.000Z

460

Imaging of granular sources in high energy heavy ion collisions  

E-Print Network [OSTI]

We investigate the source imaging for a granular pion-emitting source model in high energy heavy ion collisions. The two-pion source functions of the granular sources exhibit a two-tiered structure. Using a parametrized formula of granular two-pion source function, we examine the two-tiered structure of the source functions for the imaging data of Au+Au collisions at Alternating Gradient Synchrotron (AGS) and Relativistic Heavy Ion Collider (RHIC). We find that the imaging technique introduced by Brown and Danielewicz is suitable for probing the granular structure of the sources. Our data-fitting results indicate that there is not visible granularity for the sources at AGS energies. However, the data for the RHIC collisions with the selections of $40 < {\\rm centrality} < 90%$ and $0.20source has more parameters than the simple Gaussian, hence can describe more complicated shapes.

Zhi-Tao Yang; Wei-Ning Zhang; Lei Huo; Jing-Bo Zhang

2008-08-18T23:59:59.000Z

Note: This page contains sample records for the topic "addressee source pm-o" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Integration of Novel Flux Coupling Motor and Current Source Inverter  

Broader source: Energy.gov (indexed) [DOE]

To integrate a non permanent magnet (PM) electric machine and a current source inverter (CSI) * minimizing capacitors in inverters * eliminating rare earth materials used in...

462

Integration of Novel Flux Coupling Motor and Current Source Inverter  

Broader source: Energy.gov (indexed) [DOE]

To integrate a non permanent magnet (PM) electric machine and a current source inverter (CSI) *minimizing capacitors *eliminating rare earth materials used in traditional...

463

Development of Li+ alumino-silicate ion source  

E-Print Network [OSTI]

yellow line) from a ?-Spodumene Li test source, operated atexceeding 1200 0 C. ?-spodumene and ? eucryptite Li sourcesdeveloping high quality ?-spodumene and ?-eucryptite Li ion

Roy, P.K.

2009-01-01T23:59:59.000Z

464

Strategic Sourcing & Recent Audit Results - Scott Clemons, Strategic...  

Energy Savers [EERE]

Goals and Objectives -Identified issues needing attention: Misinterpreted definition of strategic sourcing Myriad of controls to prevent or detect errors Improve process...

465

REMOVAL OF THE CALIFORNIUM SOURCES FROM THE 222-S LABORATORY  

SciTech Connect (OSTI)

This document develops a proposal for removal of 2-Californium sources from the 222-S Laboratory. Included in this document are assessments of shipping packages and decay calculations.

LINSTRUM D; BAUNE HL

2009-07-23T23:59:59.000Z

466

Large area, surface discharge pumped, vacuum ultraviolet light source  

DOE Patents [OSTI]

Large area, surface discharge pumped, vacuum ultraviolet (VUV) light source. A contamination-free VUV light source having a 225 cm.sup.2 emission area in the 240-340 nm region of the electromagnetic spectrum with an average output power in this band of about 2 J/cm.sup.2 at a wall-plug efficiency of approximately 5% is described. Only ceramics and metal parts are employed in this surface discharge source. Because of the contamination-free, high photon energy and flux, and short pulse characteristics of the source, it is suitable for semiconductor and flat panel display material processing.

Sze, Robert C. (Santa Fe, NM); Quigley, Gerard P. (Los Alamos, NM)

1996-01-01T23:59:59.000Z

467

advanced neutron source: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

CSR Microbunching Zhirong Huang and Kwang302 Advanced Photon Source Derivation: KJK Application: ZRH Based on ZRH & KJK Main References SSY (Saldin, Schneidmiller,...

468

advanced neutron sources: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

CSR Microbunching Zhirong Huang and Kwang302 Advanced Photon Source Derivation: KJK Application: ZRH Based on ZRH & KJK Main References SSY (Saldin, Schneidmiller,...

469

air pollution sources: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

reference outlines major categories of air pollutants found at SLAC Wechsler, Risa H. 2 Air pollution sources apportionment in a French urban site Marie Chavent* Physics Websites...

470

ENVIRONMENTAL ASSESSMENT NATIONAL SYNCHROTRON LIGHT SOURCE-II  

E-Print Network [OSTI]

ENVIRONMENTAL ASSESSMENT FOR NATIONAL SYNCHROTRON LIGHT SOURCE-II (NSLS-II) BROOKHAVEN NATIONAL..............................................................................................11 4.1.1 Building Site Location ............................................................................20 5.9 Natural Hazards

Ohta, Shigemi

471

ambient ion sources: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

ions at radioactive ion beam facilities is discussed. The ability to combine high efficiency and element selectivity makes a resonance ionization laser ion source (RILIS) an...

472

Stochastic mapping for chemical plume source localization with application to autonomous hydrothermal vent discovery  

E-Print Network [OSTI]

This thesis presents a stochastic mapping framework for autonomous robotic chemical plume source localization in environments with multiple sources. Potential applications for robotic chemical plume source localization ...

Jakuba, Michael Vavrousek, 1976-

2006-01-01T23:59:59.000Z

473

Comparison of energy efficiency between variable refrigerant flow systems and ground source heat pump systems  

E-Print Network [OSTI]

as other types of air source heat pumps, VRF systems needconventional packaged air source heat pumps. Typical GSHPis basically an air source heat pump), especially when the

Hong, Tainzhen

2010-01-01T23:59:59.000Z

474

E-Print Network 3.0 - ambe source neutron Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

IN PHYSICS RESEARCH Section A Theory of neutron fluctuations in source-driven subcritical systems... source 1. Introduction ... Source: Pzsit, Imre - Department of Reactor...

475

Li+ alumino-silicate ion source development for the Neutralized Drift Compression Experiment (NDCX)  

E-Print Network [OSTI]

Li + alumino-silicate ion source development for theresults on lithium alumino-silicate ion source developmentfor a lithium alumino-silicate source is determined by the

Roy, Prabir K.

2010-01-01T23:59:59.000Z

476

Characterization of LI+ Alumino-Silicate Ion Source for Target Heating Experiments  

E-Print Network [OSTI]

OF LI + ALUMINO-SILICATE ION SOURCE FOR TARGET HEATINGcm) Li + doped alumino-silicate source to pro- duce shortdiameter lithium alumino-silicate ion source is presented.

Roy, P.K.

2013-01-01T23:59:59.000Z

477

E-Print Network 3.0 - averaged source term Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Technologies and Information Sciences 3 SourceRank: Relevance and Trust Assessment for Deep Web Sources Based on Inter-Source Agreement Summary: surmount this by defining...

478

National Synchrotron Light Source 2008 Activity Report  

SciTech Connect (OSTI)

Funded by the U.S. Department of Energy's Office of Basic Energy Sciences, the National Synchrotron Light Source (NSLS) is a national user facility that operates two electron storage rings: X-Ray (2.8 GeV, 300 mA) and Vacuum Ultraviolet (VUV) (800 mev, 1.0A). These two rings provide intense light spanning the electromagnetic spectrum -- from very long infrared rays to ultraviolet light and super-short x-rays -- to analyze very small or highly dilute samples. The properties of this light, and the specially designed experimental stations, called beamlines, allow scientists in many diverse disciplines of research to perform experiments not possible at their own laboratories. Each year, about 2,200 scientists from more than 400 universities and companies use the NSLS for research in such diverse fields as biology, physics, chemistry, geology, medicine, and environmental and materials sciences. For example, researchers have used the NSLS to examine the minute details of computer chips, decipher the structures of viruses, probe the density of bone, determine the chemical composition of moon rocks, and reveal countless other mysteries of science. The facility has 65 operating beamlines, with 51 beamlines on the X-Ray Ring and 14 beamlines on the VUV-Infrared Ring. It runs seven days a week, 24 hours a day throughout the year, except during periods of maintenance and studies. Researchers are not charged for beam time, provided that the research results are published in open literature. Proprietary research is conducted on a full-cost-recovery basis. With close to 1,000 publications per year, the NSLS is one of the most prolific scientific facilities in the world. Among the many accolades given to its users and staff, the NSLS has won nine R&D 100 Awards for innovations ranging from a closed orbit feedback system to the first device able to focus a large spread of high-energy x-rays. In addition, a visiting NSLS researcher shared the 2003 Nobel Prize in Chemistry for work explaining how one class of proteins helps to generate nerve impulses.

Nasta,K.

2009-05-01T23:59:59.000Z

479

A Generalized Finite Source Calibration Factor: A Natural Improvement to the Finite Source Correction Factor for Uranium Holdup Measurements  

SciTech Connect (OSTI)

This paper proposes refinements to the finite source correction factor used in holdup measurements. Specifically it focuses on a more general method to estimate the average detector response for a finite source. This proposed method for the average detector response is based directly on the Generalized Geometry Holdup (GGH) assay method. First, the finite source correction factor as originally proposed is reviewed in this paper. Following this review the GGH assay method is described. Lastly, a new finite area calibration factor based on GGH is then proposed for finite point and line sources. As an alternative to the direct use of the finite arca calibration factor, finite source correction factors are also derived from this calibration factor. This new correction factor can be used in a manner similar to the finite source correction factor as currently implemented.

Gunn, C.A.; Oberer, R.B.; chiang, L.G.; Ceo, R.N.

2003-01-28T23:59:59.000Z

480

OpenADR Open Source Toolkit: Developing Open Source Software for the Smart Grid  

SciTech Connect (OSTI)

Demand response (DR) is becoming an increasingly important part of power grid planning and operation. The advent of the Smart Grid, which mandates its use, further motivates selection and development of suitable software protocols to enable DR functionality. The OpenADR protocol has been developed and is being standardized to serve this goal. We believe that the development of a distributable, open source implementation of OpenADR will benefit this effort and motivate critical evaluation of its capabilities, by the wider community, for providing wide-scale DR services

McParland, Charles

2011-02-01T23:59:59.000Z

Note: This page contains sample records for the topic "addressee source pm-o" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Three-dimensional two-pion emission source at SPS: Extraction of source breakup time and emission duration  

SciTech Connect (OSTI)

A model-independent, three-dimensional source function for pion pairs has been extracted from Pb + Pb collisions at {radical}s{sub NN} = 17.3 GeV. The extracted source exhibits long-range non-Gaussian tails in the directions of the pion-pair net transverse momentum and of the beam. Comparison with the Therminatormodel allows for an extraction of the pion source proper breakup time and of emission duration in the collisions.

Chung, P., E-mail: pchung@mail.chem.sunysb.ed [Stony Brook University (SUNYSB), Department of Chemistry (United States); Danielewicz, P., E-mail: danielewicz@nscl.msu.ed [Michigan State University, National Superconducting Cyclotron Laboratory and Department of Physics and Astronomy (United States)

2008-09-15T23:59:59.000Z

482

Optimized Volumetric Scanning for X-Ray Array Sources  

SciTech Connect (OSTI)

Non-destructive evaluation (NDE) is the science and technology of determining non-invasively the internal structure of manufactured parts, objects, and materials. NDE application areas include medicine, industrial manufacturing, military, homeland security, and airport luggage screening. X-ray measurement systems are most widely used because of their ability to image through a wide range of material densities (from human tissue in medical applications to the dense materials of weapon components). Traditional x-ray systems involve a single source and detector system that rotate and/or translate about the object under evaluation. At each angular location, the source projects x-rays through the object. The rays undergo attenuation proportional to the density of the object's constitutive material. The detector records a measure of the attenuation. Mathematical algorithms are used to invert the forward attenuated ray projection process to form images of the object. This is known as computed tomography (CT). In recent years, the single-source x-ray NDE systems have been generalized to arrays of x-ray sources. Array sources permit multiple views of the object with fewer rotations and translations of the source/detector system. The spatially diverse nature of x-ray array sources has the potential of reducing data collection time, reducing imaging artifacts, and increasing the resolution of the resultant images. Most of the existing CT algorithms were not derived from array source models with a spatially diverse set of viewing perspectives. Single-source x-ray CT data collection, processing, and imaging methods and algorithms are not applicable when the source location is expanded from one dimension (a rotating and/or translating point source) to two (a rotating and/or translating array). They must be reformulated. The goal of this project is to determine the applicability of x-ray array sources to problems of interest to LLNL and its customers. It is believed array source data collection will be faster while yielding higher resolution reconstructions with fewer artifacts. There are three tasks in the research: (1) Develop forward array source analytic and computational models; (2) Research and develop array source reconstruction algorithms; and (3) Perform experiments.

Lehman, S K; Foudray, A M; Wang, A; Kallman, J S; Martz, H

2009-09-29T23:59:59.000Z

483

Ground-source Heat Pumps Applied to Commercial Buildings  

SciTech Connect (OSTI)

Ground-source heat pumps can provide an energy-efficient, cost-effective way to heat and cool commercial facilities. While ground-source heat pumps are well established in the residential sector, their application in larger, commercial-style, facilities is lagging, in part because of a lack of experience with the technology by those in decision-making positions. Through the use of a ground-coupling system, a conventional water-source heat pump design is transformed to a unique means of utilizing thermodynamic properties of earth and groundwater for efficient operation throughout the year in most climates. In essence, the ground (or groundwater) serves as a heat source during winter operation and a heat sink for summer cooling. Many varieties in design are available, so the technology can be adapted to almost any site. Ground-source heat pump systems can be used widely in commercial-building applications and, with proper installation, offer great potential for the commercial sector, where increased efficiency and reduced heating and cooling costs are important. Ground-source heat pump systems require less refrigerant than conventional air-source heat pumps or air-conditioning systems, with the exception of direct-expansion-type ground-source heat pump systems. This chapter provides information and procedures that an energy manager can use to evaluate most ground-source heat pump applications. Ground-source heat pump operation, system types, design variations, energy savings, and other benefits are explained. Guidelines are provided for appropriate application and installation. Two case studies are presented to give the reader a sense of the actual costs and energy savings. A list of manufacturers and references for further reading are included for prospective users who have specific or highly technical questions not fully addressed in this chapter. Sample case spreadsheets are provided in Appendix A. Additional appendixes provide other information on the ground-source heat pump technology.

Parker, Steven A.; Hadley, Donald L.

2009-07-14T23:59:59.000Z

484

Modelling Of Downhole Seismic Sources I: Literature Review, Review Of Fundamentals, Impulsive Point Source In A Borehole  

E-Print Network [OSTI]

This paper represents the first of a two paper sequence comprising a multi-faceted introduction to the numerical and analytical modelling of seismic sources in a borehole.

Meredith, J. A.

1990-01-01T23:59:59.000Z

485

Secondary Startup Neutron Sources as a Source of Tritium in a Pressurized Water Reactor (PWR) Reactor Coolant System (RCS)  

SciTech Connect (OSTI)

The hypothesis of this paper is that the Zircaloy clad fuel source is minimal and that secondary startup neutron sources are the significant contributors of the tritium in the RCS that was previously assigned to release from fuel. Currently there are large uncertainties in the attribution of tritium in a Pressurized Water Reactor (PWR) Reactor Coolant System (RCS). The measured amount of tritium in the coolant cannot be separated out empirically into its individual sources. Therefore, to quantify individual contributors, all sources of tritium in the RCS of a PWR must be understood theoretically and verified by the sum of the individual components equaling the measured values.

Shaver, Mark W.; Lanning, Donald D.

2010-02-01T23:59:59.000Z

486

Brookhaven National Laboratory Source Water Assessment for Drinking Water  

E-Print Network [OSTI]

BNL 52608 Brookhaven National Laboratory Source Water Assessment for Drinking Water Supply Wells Under Contract with the United States Department of Energy Contract No. DE-AC02-98CH10886 #12;BNL 52608 Brookhaven National Laboratory Source Water Assessment for Drinking Water Supply Wells December 27, 2000

487

Femtosecond laser-electron x-ray source  

DOE Patents [OSTI]

A femtosecond laser-electron X-ray source. A high-brightness relativistic electron injector produces an electron beam pulse train. A system accelerates the electron beam pulse train. The femtosecond laser-electron X-ray source includes a high intra-cavity power, mode-locked laser and an x-ray optics system.

Hartemann, Frederic V.; Baldis, Hector A.; Barty, Chris P.; Gibson, David J.; Rupp, Bernhard

2004-04-20T23:59:59.000Z

488

Lighting affects appearance LightSource emits photons  

E-Print Network [OSTI]

1 Lighting affects appearance #12;2 LightSource emits photons Photons travel in a straight line). And then some reach the eye/camera. #12;3 Basic fact: Light is linear Double intensity of sources, double photons reaching eye. Turn on two lights, and photons reaching eye are same as sum of number when each

Jacobs, David

489

Lighting affects appearance LightSource emits photons  

E-Print Network [OSTI]

1 Lighting affects appearance #12;2 LightSource emits photons Photons travel in a straight line). And then some reach the eye/camera. #12;3 Reflectance Model how objects reflect light. Model light sources Algorithms for computing Shading: computing intensities within polygons Determine what light strikes what

Jacobs, David

490

Energy sources for a secure (?) and clean (?) energy future  

E-Print Network [OSTI]

ERG/200804 Energy sources for a secure (?) and clean (?) energy future Larry Hughes Energy Research." South Korean Prime Minister Han Seung-soo, 6 July 2008 #12;Energy sources for a secure (?) and clean #12;"To take concrete measures to save energy is not a matter of choice but a matter of survival

Hughes, Larry

491

Low resolution conductivity estimation to improve source localization  

E-Print Network [OSTI]

source analysis in the brain is sensitive to the conductivities of head tissues, which vary across of 10-8 ) [4]. Fig. 1. Realistic four compartment (scalp, skull, CSF, brain) finite element head model Neuroscience, University of California San Diego, USA Abstract. Bioelectric source localization in the brain

Utah, University of

492

The investigation of high intensity laser driven micro neutron sources  

E-Print Network [OSTI]

, access to high temperature states of mat- ter capable of thermonuclear fusion and/or the effi- cientThe investigation of high intensity laser driven micro neutron sources for fusion materials. The application of fast pulse, high intensity lasers to drive low cost DT point neutron sources for fusion

Ghoniem, Nasr M.

493

Rate-Adaptive Codes for Distributed Source Coding David Varodayan  

E-Print Network [OSTI]

S with respect to a channel code C. Upon receipt of the syndrome, the distributed source decoder can narrow down- proach with their DISCUS framework [7]. The distributed source encoder compresses X into its syndrome is an at- tractive solution. The encoder transmits a short syndrome based on an aggressive code

Girod, Bernd

494

Roofing in the Urban Environment: Pollution Source of Opportunity for  

E-Print Network [OSTI]

demand ­ surrogate for organics · Heavy metals and major cations (copper, h i d i l d i ichromium1 Roofing in the Urban Environment: Pollution Source of Opportunity for Source Control? Shirley E Facility Metal Range (mg/L) Average % COV (%) Direct roof runoff from 7 storms Metal Range (mg/L) Average

Clark, Shirley E.

495

ANISOTROPY OF SOURCE PARAMETERS FROM INDUCED MICROSEISMICITY Peter Starzec1  

E-Print Network [OSTI]

1 ANISOTROPY OF SOURCE PARAMETERS FROM INDUCED MICROSEISMICITY Peter Starzec1 , Michael Fehler2 distributions of shear displacement at the source of microearthquakes induced by hydraulic fracturing were the reservoir that are far from injection wells. Background The Hot Dry Rock Geothermal Energy (HDR) concept

496

Source: http://www.ftc.gov/debtcollection ost accidents  

E-Print Network [OSTI]

Source: http://www.ftc.gov/debtcollection M ost accidents on the job are caused by un- safe actions-852-4392 #12;Source: Office of Dietary Supplements, National Institutes of Health F requently the missing piece to finding work-life balance is "mindset." This is a psycho- logical leap to rock-solid commit- ment

Oliver, Douglas L.

497

Train-the-Trainer As ground source heat  

E-Print Network [OSTI]

Train-the-Trainer As ground source heat pumps capture more of the HVAC market, the need will also receive a copy of the Closed-Loop/ Ground- Source Heat Pump Systems Installation Guide ∑ Soils and Rock Identification ∑ Pump and Fluid Selection Registration information You must be an IGSHPA

498

Radiation interference from sources rotating around Schwarzschild black holes  

E-Print Network [OSTI]

We investigate the influence of the spacetime curvature on the interference of the radiation emitted by an ensemble of scalar sources in circular motion around a Schwarzschild black hole. We pay particular attention to the transition from the radiating to the non-radiating regime as the number of sources increases.

Raissa F. P. Mendes; George E. A. Matsas

2011-10-04T23:59:59.000Z

499

Diagnostics and modeling of plasma processes in ion sources  

E-Print Network [OSTI]

Diagnostics and modeling of plasma processes in ion sources Akos Vertes*, Renaat Gijbels, and Fred and describe the underlying phys- icochemical processes. Plasma diagnostic methods were borrowed from plasma, Belgium I. INTRODUCTION Plasma ion sources are constantly growing in importance in the field of atomic

Vertes, Akos

500

assessment source test: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

source test First Page Previous Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Next Page Last Page Topic Index 1 SEED SOURCE ASSESSMENTS--OTHER lthough the...