Powered by Deep Web Technologies
Note: This page contains sample records for the topic "additional information purpose" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Usage Codes Additional Information  

E-Print Network [OSTI]

Usage Codes 1 5 2 6 3 7 4 8 Additional Information Winches (on deck) Electronics RPM: Max hoistingPresent? Usage Model Ratio Accuracy (m) Type: Electric / Hydraulic / Other _________________ KHz: GPS: Internal Other: Y / N Other: Y / N Y / NOther: Hydrophone Burned on board: Net sensors Usage Manufacturer High

2

Additional Information You can find additional information about  

E-Print Network [OSTI]

/default.htm For additional Information contact: Quality Assurance & Audit Coordinator at414-456-8844 or Research Subject are members of IRBs. All IRBs must follow federal rules and state laws in their review of research studies

3

Purpose:  

Broader source: Energy.gov (indexed) [DOE]

Structured Walkthrough (SWT) Structured Walkthrough (SWT) Process Guide Version 3 September 2002 U.S. Department of Energy Office of the Chief Information Officer Purpose: This process guide describes the method for conducting a structured walkthrough during the lifecycle stages of systems engineering projects, regardless of hardware platform. Organization: This process guide consists of the following sections: $ Overview $ Responsibilities Before the Walkthrough $ Responsibilities During the Walkthrough $ Responsibilities After the Walkthrough $ Additional Activities After the Walkthrough $ Follow-up Activities $ Structured Walkthroughs for Lifecycle Stages $ Structured Walkthroughs for Other Documents $ Structured Walkthrough Meeting Record (sample) $ Structured Walkthrough Management Summary Report (sample)

4

Active Sites Additional Information | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Cleanup Sites » Active Sites Additional Information Cleanup Sites » Active Sites Additional Information Active Sites Additional Information Active Sites Additional Information The Office of Environmental Management (EM) supports the Department's Strategic Plan to complete the environmental remediation of legacy and active sites, while protecting human health and the environment by completing environmental remediation of legacy and active Cold War sites. The EM program was established in 1989 and is responsible for the cleanup of millions of gallons of liquid radioactive waste, millions of cubic yards of solid radioactive wastes, thousands of tons of spent (used) nuclear fuel and special nuclear material, huge quantities of contaminated soil and water, disposition of large volumes of transuranic and mixed/low-level

5

PURPOSE  

U.S. Energy Information Administration (EIA) Indexed Site

OPERATIONS OPERATIONS REPORT INSTRUCTIONS OMB No. 1905-0129 Approval Expires: 12/31/2015 Burden: 2.7 Hours 1 PURPOSE Form EIA-923 collects information from electric power plants and combined heat and power (CHP) plants in the United States (see Required Respondents immediately below). Data collected on this form include electric power generation, fuel consumption, fossil fuel stocks, delivered fossil fuel cost, combustion byproducts, operational cooling water data, and operational data for NO x , SO 2 , and particulate matter control equipment. These data are used to monitor the status and trends of the electric power industry and appear in many U.S. Energy Information Administration (EIA) publications including: Electric Power Monthly, Electric Power Annual, Monthly Energy Review, Annual Energy Review, Natural Gas Monthly,

6

PURPOSE  

U.S. Energy Information Administration (EIA) Indexed Site

923 923 POWER PLANT OPERATIONS REPORT INSTRUCTIONS OMB No. 1905-0129 Approval Expires: 12/31/2016 Burden: 2.3 Hours 1 PURPOSE Form EIA-923 collects information on the operation of electric power plants and combined heat and power (CHP) plants in the United States (see Required Respondents immediately below). Data collected on this form include electric power generation, fuel consumption, fossil fuel stocks, delivered fossil fuel cost, combustion byproducts, operational cooling water data, and operational data for NO x , SO 2 , particulate matter mercury and acid gas control equipment. These data are used to monitor the status and trends of the electric power industry and appear in many U.S. Energy Information Administration (EIA) publications

7

For additional information, contact: Department of Psychology  

E-Print Network [OSTI]

For additional information, contact: Department of Psychology Montana State University 325.montana.edu/wwwpy psydept@montana.edu PSYCHOLOGY: SCIENCE FOR FUTURE CAREERS Our department offers a Bachelor of Science (B.S.) degree in psychology. This degree prepares undergraduate students for employment in applied settings

Maxwell, Bruce D.

8

For additional information, contact: Department of Ecology  

E-Print Network [OSTI]

For additional information, contact: Department of Ecology Montana State University 310 Lewis Hall P.O. Box 173460 Bozeman, MT 59717-3460 Tel: 406-994-4548 Fax: 406-994-3190 www.montana.edu/ecology/ ecology@montana.edu The Department of Ecology at Montana State University offers undergraduate majors

Maxwell, Bruce D.

9

Purpose  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Purpose Purpose Determine which objects are attracted to a magnet. Performing the experiment 1. Touch the magnet to each object. Which objects or which portions of objects are attracted to the magnet? 2. See if you can attract the paper clip to one end of the magnet and then pick up another paper clip, or nail with the paper clip. 3. Rub the paper clip slowly over the magnet in its long direction about fifty times. Now try to pick up a second paper clip with the first paper clip, but without the magnet. What do you observe? 4. Try the maze - place a paper clip on top of the paper. Place a magnet on the underside of the paper. Can you guide the paper clip through the maze? 5. Try to make your donut magnets look like these. Questions to think about

10

Purpose  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

2/3/2012 2/3/2012 Organization and Human Asset Plan (OHAP) Purpose The Fermilab OHAP is a principal output of the key support process for Strategic Planning and Goals Development within the FRA Contractor Assurance Performance Planning System (M3.) The OHAP development process considers annual forecasts of potentially significant changes to FRA/FNAL mission and scientific program plans and develops strategies and approaches to ensure an adequately trained and skilled future total workforce is available to achieve the Laboratory mission and strategic objectives. OHAP Outcomes As part of the Strategic Planning and Goal Setting process, laboratory management annually reviews potentially significant changes to missions, programs, and initiatives with respect to the FRA/FNAL Strategic and DOE Annual Lab Plans and

11

PURPOSE  

U.S. Energy Information Administration (EIA) Indexed Site

OPERATIONS REPORT OMB No. 1905-0129 Approval Expires: 12/31/2015 Burden: 2.7 Hours NOTICE: This report is mandatory under the Federal Energy Administration Act of 1974 (Public Law 93-275). Failure to comply may result in criminal fines, civil penalties and other sanctions as provided by law. For further information concerning sanctions and data protections see the provision on sanctions and the provision concerning confidentiality of information in the instructions. Title 18 USC 1001 makes it a criminal offense for any person knowingly and willingly to make to any Agency or Department of the United States any false, fictitious, or fraudulent statements as to any matter within its jurisdiction. SCHEDULE 1. IDENTIFICATION Survey Contact

12

Property:AdditionalRef | Open Energy Information  

Open Energy Info (EERE)

Property Property Edit with form History Facebook icon Twitter icon » Property:AdditionalRef Jump to: navigation, search Property Name AdditionalRef Property Type Text Description Additional references useful to general public and technical experts. Pages using the property "AdditionalRef" Showing 23 pages using this property. 2 2-M Probe Survey + Mark F. Coolbaugh,Chris Sladek,James E. Faulds,Richard E. Zehner,Gary L. Oppliger. 2007. [[Use of Rapid Temperature Measurements at a 2-Meter Depth to Augment Deeper Temperature Gradient Drilling]]. In: Proceedings of Thirty-Second Workshop on Geothermal Reservoir Engineering. Thirty-Second Workshop on Geothermal Reservoir Engineering; 2007/01/22; Stanford, CA. Stanford, CA: Stanford University, Stanford Geothermal Program; p. 109-116 Christopher Kratt,Mark F. Coolbaugh,Bill Peppin,Chris Sladek. 2009. [[Identification of a New Blind Geothermal System with Hyperspectral Remote Sensing and Shallow Temperature Measurements at Columbus Salt Marsh, Esmeralda County, Nevada]]. In: Transactions. GRC Annual Meeting; 2009/10/04; Reno, NV. Davis, CA: Geothermal Resources Council; p. 481-485 Chris Sladek,Mark F. Coolbaugh,Christopher Kratt. 2009. [[Improvements in Shallow (Two-Meter) Temperature Measurements and Data Interpretation]]. In: Transactions. GRC Annual Meeting; 2009/10/04; Reno, NV. Davis, CA: Geothermal Resources Council; p. 535-541 Justin Skord,Patricia H. Cashman,Mark Coolbaugh,Nicholas Hinz. 2011. [[Mapping Hydrothermal Upwelling and Outflow Zones: Preliminary Results from Two-Meter Temperature Data and Geologic Analysis at Lee Allen Springs and Salt Wells Basin]]. In: Transactions. GRC Annual Meeting; 2011/10/23; San Diego, CA. Davis, CA: Geothermal Resources Council; p.

13

An Intranet and Internet based Information System for Administration and Information purposes*  

E-Print Network [OSTI]

groups etc.) the prefecture of Corfu. It is exploiting Intranet and Extranet technologies in order with this important problem has designed and now is implementing an Information System based on Intranet technologies1 An Intranet and Internet based Information System for Administration and Information purposes

Bouras, Christos

14

Efficiency of production of additional condensation power at dual-purpose turbine plants  

Science Journals Connector (OSTI)

Results of detailed computations (performed with the use of mathematical models of dual-purpose turbine plants) of the effect of the main operating factors on the energy and economic efficiency of the production ...

E. I. fros; N. V. Tatarinova

2006-11-01T23:59:59.000Z

15

Additional Information | U.S. DOE Office of Science (SC)  

Office of Science (SC) Website

Additional Information Additional Information Laboratory Policy and Evaluation (LPE) LPE Home Staff M&O Contracts SC Laboratory Appraisal Process Laboratory Planning Process Work for Others in the Office of Science Laboratory Directed Research and Development (LDRD) DOE's Philosophy on LDRD Frequently Asked Questions Success Stories Brochures Additional Information LDRD Program Contacts Technology Transfer DOE National Laboratories Contact Information Laboratory Policy and Evaluation U.S. Department of Energy SC-32/Forrestal Building 1000 Independence Ave., SW Washington, DC 20585 P: (202) 586-5447 F: (202) 586-3119 Laboratory Directed Research and Development (LDRD) Additional Information Print Text Size: A A A RSS Feeds FeedbackShare Page Resources The Department of Energy (DOE) national laboratories have the authority to

16

NETL: Carbon Storage FAQ Information Portal - Additional Resources  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Additional Resources Additional Resources Where can I get additional information? Links to Other Major Internal and External Resources on Carbon Storage Annual Conference on Carbon Capture and Sequestration Carbon Capture & Sequestration Technologies - Program at MIT that conducts research into technologies to capture, utilize, and store CO2 from large stationary sources CO2 Capture Project - International effort that addresses carbon emissions reduction in a manner that will contribute to an environmentally acceptable and competitively priced continuous energy supply for the world Carbon Dioxide Information Analysis Center - Global climate-change data and information analysis center of the U.S. Department of Energy; managed by Oak Ridge National Laboratory Carbon Mitigation Initiative - Joint project of Princeton University, BP, and Ford Motor Company to find solutions to greenhouse gas and global warming problem

17

For additional information, contact: Department of History, Philosophy  

E-Print Network [OSTI]

For additional information, contact: Department of History, Philosophy & Religious Studies Montana "Philosophy of Science," "Nature and Religion" and "The Darwinian Revolution." The World The department offers courses ranging from "Latin American Perspectives" to "Religion of Ancient Egypt" to "Philosophies of Asia

18

Student Handbook This handbook is for informational purposes only and should never be used as a  

E-Print Network [OSTI]

professionals. Information contained in this handbook does not constitute legal advice. Please note that laws#12;#12;#12;Student Handbook This handbook is for informational purposes only and should never. Advertisements of any products or services in this handbook do not constitute an endorsement by Colorado State

19

TECHNIQUES AND CAPABILITIES APPLICATIONS SPECIFIC PROJECTS / ADDITIONAL INFORMATION  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

TECHNIQUES AND CAPABILITIES TECHNIQUES AND CAPABILITIES APPLICATIONS SPECIFIC PROJECTS / ADDITIONAL INFORMATION * Source: 2 ID - EPU 105 (3 m, PM , 20-200 eV) EPU 56 (3 m PM, 200-2000 eV) * High-Resolution Angular Resolved Photoemission Scanning Microscopy (µ-ARPES): 20-1500 eV, 1 µm, < 1 meV, <0.1 o , 5-2000 K * Ambient Pressure Scanning Photoelectron Microscopy (AP- SPEM): 200-1800 eV, < 300 nm, 10 +3 Torr * Low-Energy Electron Microscopy & X-ray Photoemission Electron Microscopy (LEEM/XPEEM): 20 - 1800 eV, < 10 nm, high- transmission aberration correction µ-SP-ARPES: Momentum-resolved electronic structurelectronic bands of magnetic materials and non- magnetic materials with le of solids; spin-polarized arge spin-orbit interaction; a 1 µm spot from NSLS-

20

PAT-1 safety analysis report addendum author responses to request for additional information.  

SciTech Connect (OSTI)

The Plutonium Air Transportable Package, Model PAT-1, is certified under Title 10, Code of Federal Regulations Part 71 by the U.S. Nuclear Regulatory Commission (NRC) per Certificate of Compliance (CoC) USA/0361B(U)F-96 (currently Revision 9). The National Nuclear Security Administration (NNSA) submitted SAND Report SAND2009-5822 to NRC that documented the incorporation of plutonium (Pu) metal as a new payload for the PAT-1 package. NRC responded with a Request for Additional Information (RAI), identifying information needed in connection with its review of the application. The purpose of this SAND report is to provide the authors responses to each RAI. SAND Report SAND2010-6106 containing the proposed changes to the Addendum is provided separately.

Weiner, Ruth F.; Schmale, David T.; Kalan, Robert J.; Akin, Lili A.; Miller, David Russell; Knorovsky, Gerald Albert; Yoshimura, Richard Hiroyuki; Lopez, Carlos; Harding, David Cameron; Jones, Perry L.; Morrow, Charles W.

2010-09-01T23:59:59.000Z

Note: This page contains sample records for the topic "additional information purpose" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Property:AdditionalBenefitPlaces | Open Energy Information  

Open Energy Info (EERE)

AdditionalBenefitPlaces AdditionalBenefitPlaces Jump to: navigation, search This is a property of type Page. Pages using the property "AdditionalBenefitPlaces" Showing 21 pages using this property. A Atlantic City Electric Company Smart Grid Project + Maryland +, District of Columbia + Avista Utilities Smart Grid Project + Idaho + B Black Hills Power, Inc. Smart Grid Project + North Dakota +, Minnesota + C Consolidated Edison Company of New York, Inc. Smart Grid Project + New Jersey + D Duke Energy Business Services LLC Smart Grid Project + Indiana +, Ohio + E El Paso Electric Smart Grid Project + New Mexico + Electric Power Board of Chattanooga Smart Grid Project + Georgia + F FirstEnergy Service Company Smart Grid Project + Pennsylvania + I ISO New England, Incorporated Smart Grid Project + Connecticut +, Maine +, New Hampshire +, ...

22

Martin's Additions, Maryland: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

Martin's Additions, Maryland: Energy Resources Martin's Additions, Maryland: Energy Resources Jump to: navigation, search Equivalent URI DBpedia Coordinates 38.978439°, -77.069689° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":38.978439,"lon":-77.069689,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

23

Airport Road Addition, Texas: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

Addition, Texas: Energy Resources Addition, Texas: Energy Resources Jump to: navigation, search Equivalent URI DBpedia Coordinates 27.2200435°, -98.0994483° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":27.2200435,"lon":-98.0994483,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

24

Enclosure 2 Additional Information on K-Basins Knock-Out Pot Sludge  

E-Print Network [OSTI]

Enclosure 2 Additional Information on K-Basins Knock-Out Pot Sludge Source of Knock-Out Pot Sludge cleaning machine that removed the sludge from the surface of the fuel elements. Removing the sludge from or debris. Knock-Out pot sludge is different from sludge formed in other parts of the K-Basin. Because

25

E-Print Network 3.0 - additional information relating Sample...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

7 of 7 INTENDED ATTACHMENT LIST ADDITIONAL... : Name: Title: Office Phone: Home Phone: Cell Phone: Provided by Public Relations 12;Briefing details... Page 5 of 7 TABLE GUEST...

26

E-Print Network 3.0 - accident additional information Sample...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Biology and Medicine ; Environmental Sciences and Ecology 13 September 2003 AUTOMOBILE ACCIDENTS Summary: information with the other people involved in the accident. You...

27

A Bilingual Information Retrieval Thesaurus: Design and Value Addition with Online Lexical Tools  

Science Journals Connector (OSTI)

Illustrates value addition to a thesaurus using available online lexical tools to enhance ... based on a project for building a bilingual thesaurus as a component of a search interface...

K. S. Raghavan; A. Neelameghan

2008-01-01T23:59:59.000Z

28

NYU Electronic Suite for eBilling + ePayment For additional information, visit the Electronic Suite section on the  

E-Print Network [OSTI]

NYU Electronic Suite for eBilling + ePayment For additional information, visit the Electronic Suite of options. This will link you to the secure eSuite website. If parents want to make an electronic check-check payment, parents must be invited by the student, to create an eSuite account. NYU's Electronic Suite

Mohri, Mehryar

29

Additional Information Regarding Request For Alternative Testing Per 10CFR50.55a(a)(3)(i)  

E-Print Network [OSTI]

In the referenced letter, Vermont Yankee (VY) submitted for your review and approval a request for relief from the requirements of American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code, Section XI, and ASME/ANSI OM, "Operation and Maintenance of Nuclear Power Plants" regarding the testing of excess flow check valves. Based on communications with NRC staff, VY is providing the attached, additional information to supplement the referenced request. If you have any questions on this transmittal, please contact Mr. Thomas B. Silko at (802) 258-4146. Sincerely, VERMONT E LEAR POWER CORPORATION

Vermont Yankee

2001-01-01T23:59:59.000Z

30

Personal Property (Informational Purposes Only)  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

This draft has been scheduled for final review before the Directives Review Board on 02/5/2015. All major comments and concerns should be provided to your DRB representative by 02/3/2015, following your organization process. If you do not know who your representative is, please see the list of DRB members. If your office is represented by Ingrid Kolb, Director, Office of Management, please submit your major concerns and comments to the DRB Liaison, Camille Beben (Camille.Beben@hq.doe.gov; 202-586-1014).

2015-01-26T23:59:59.000Z

31

SECTION A: STUDENT INFORMATION ______________________________________________________________________ 93#____________________________________  

E-Print Network [OSTI]

SECTION A: STUDENT INFORMATION # __________________@_________________________ (______)______________ ________/________/_________ Email Address Phone # Effective Date of this Request SECTION B: ADDITIONAL INFORMATION The items listed below are designated as "Directory Information" and may be released for any purpose at the discretion

Swaddle, John

32

Identifying Classified Information (Informational Purposes Only)  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

This draft has been scheduled for final review before the Directives Review Board on 8-21-14. All major comments and concerns should be provided to your DRB representative, following your organization process. If you do not know who your representative is, please see the list of DRB members at https://www.directives.doe.gov/beta/references/directives-review-board. If your office is represented by Ingrid Kolb, Director, Office of Management, please submit your major concerns and comments to the DRB Liaison, Camille Beben (Camille.Beben@hq.doe.gov; 202-586-1014). All major comments and concerns should be submitted by COB 8-19-2014.

2014-08-12T23:59:59.000Z

33

Integration of Remote Sensing Information, Digital Elevation Models and Digital Maps Within a GIS to Generate New Spatial Environmental Data Sets for Water Management Purposes  

Science Journals Connector (OSTI)

In recent times, it has become apparent that environmental information systems are useful only if they work with a high resolution in space. Detailed area information is required in order to identify environmenta...

G. A. Schultz

1997-01-01T23:59:59.000Z

34

Additional File 1 Specimen information  

E-Print Network [OSTI]

.27516 -84.73164 C EU034682 MVZ 257284 GA Cherokee 34.32599 -84.32105 E EU034684 MVZ 257285 GA Cherokee 34

Vieites, David R.

35

Phosphazene additives  

DOE Patents [OSTI]

An additive comprising a phosphazene compound that has at least two reactive functional groups and at least one capping functional group bonded to phosphorus atoms of the phosphazene compound. One of the at least two reactive functional groups is configured to react with cellulose and the other of the at least two reactive functional groups is configured to react with a resin, such as an amine resin of a polycarboxylic acid resin. The at least one capping functional group is selected from the group consisting of a short chain ether group, an alkoxy group, or an aryloxy group. Also disclosed are an additive-resin admixture, a method of treating a wood product, and a wood product.

Harrup, Mason K; Rollins, Harry W

2013-11-26T23:59:59.000Z

36

Facility Safety (For Informational Purposes Only)  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

This draft has been scheduled for final review before the Directives Review Board on 12/18/14. All major comments and concerns should be provided to your DRB representative, following your organization process. If you do not know who your representative is, please see the list of DRB members. If your office is represented by Ingrid Kolb, Director, Office of Management, please submit your major concerns and comments to the DRB Liaison, Camille Beben (Camille.Beben@hq.doe.gov; 202-586-1014). All major comments and concerns should be submitted by COB 12/16/2014.

2014-12-04T23:59:59.000Z

37

Administering Workforce Discipline (Informational Purposes Only)  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

This draft has been scheduled for final review before the Directives Review Board on 02/5/2015. All major comments and concerns should be provided to your DRB representative by 02/3/2015, following your organization process. If you do not know who your representative is, please see the list of DRB members. If your office is represented by Ingrid Kolb, Director, Office of Management, please submit your major concerns and comments to the DRB Liaison, Camille Beben (Camille.Beben@hq.doe.gov; 202-586-1014).

2015-01-26T23:59:59.000Z

38

Insider Threat Program (For Informational Purposes)  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

This draft has been scheduled for final review before the Directives Review Board on 03/20/14. All major comments and concerns should be provided to your DRB representative, following your organization process. If you do not know who your representative is, please see the list of DRB members at https://www.directives.doe.gov/beta/references/directives-review-board. If your office is represented by Ingrid Kolb, Director, Office of Management, please submit your major concerns and comments to the DRB Liaison, Camille Beben (Camille.Beben@hq.doe.gov; 202-586-1014). All major comments and concerns should be submitted by COB 03/18/2014.

2014-03-10T23:59:59.000Z

39

Official Foreign Travel (Informational Purposes Only)  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

This draft directive is scheduled for review by the Directives Review Board on 3/1/12. Any questions, comments, or concerns with the proposed directive can be sent to your Directives Review Board representative (https://www.directives.doe.gov/references/directives-review-board-members) through your Directives Point of Contact (https://www.directives.doe.gov/development-review/dpc-corner/2010-10-1.pdf).

2012-02-24T23:59:59.000Z

40

Position Management and Classification (Informational Purposes Only)  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

This draft has been scheduled for final review before the Directives Review Board on 02/5/2015. All major comments and concerns should be provided to your DRB representative by 02/3/2015, following your organization process. If you do not know who your representative is, please see the list of DRB members. If your office is represented by Ingrid Kolb, Director, Office of Management, please submit your major concerns and comments to the DRB Liaison, Camille Beben (Camille.Beben@hq.doe.gov; 202-586-1014).

2015-01-26T23:59:59.000Z

Note: This page contains sample records for the topic "additional information purpose" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Acquisition Career Management Program (Informational Purposes Only)  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

This draft has been scheduled for final review before the Directives Review Board on 12-4-2014. All major comments and concerns should be provided to your DRB representative, following your organization process. If you do not know who your representative is, please see the list of DRB members at https://www.directives.doe.gov/beta/references/directives-review-board. If your office is represented by Ingrid Kolb, Director, Office of Management, please submit your major concerns and comments to the DRB Liaison, Camille Beben (Camille.Beben@hq.doe.gov; 202-586-4014). All major comments and concerns should be submitted by COB 12-2-2014.

2014-11-21T23:59:59.000Z

42

Additional Climate Reports  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Additional Climate Reports Print E-mail Additional Climate Reports Print E-mail Intergovernmental Panel on Climate Change (IPCC) Reports Internationally, many assessments have been produced to address important questions related to environmental issues such as ozone depletion, climate change, and the loss of biodiversity. Many of these assessments have provided the scientific basis for the elaboration of international agreements, including the Assessment Report Series from the Intergovernmental Panel on Climate Change (IPCC). The IPCC is a scientific intergovernmental body set up by the World Meteorological Organization (WMO) and by the United Nations Environment Programme (UNEP). IPCC assesses the scientific, technical and socio-economic information relevant for the understanding of the risk of human-induced climate change. Because of its intergovernmental nature, the IPCC is able to provide scientific technical and socio-economic information in a policy-relevant but policy neutral way to decision makers.

43

This handout is a short guide for citing commonly used electronic sources using Modern Language Association (MLA) style. For additional information, consult the MLA Handbook for  

E-Print Network [OSTI]

This handout is a short guide for citing commonly used electronic sources using Modern Language. Below are examples of bibliographic entries for electronic sources. Consistency is essential. Note. When citing, you must give the reader enough information to locate the source. In MLA style, sources

44

NGSI student activities in open source information analysis in support of the training program of the U.S. DOE laboratories for the entry into force of the additional protocol  

SciTech Connect (OSTI)

In 2008 a joint team from Los Alamos National Laboratory (LANL) and Brookhaven National Laboratory (BNL) consisting of specialists in training of IAEA inspectors in the use of complementary access activities formulated a training program to prepare the U.S. Doe laboratories for the entry into force of the Additional Protocol. As a major part of the support of the activity, LANL summer interns provided open source information analysis to the LANL-BNL mock inspection team. They were a part of the Next Generation Safeguards Initiative's (NGSI) summer intern program aimed at producing the next generation of safeguards specialists. This paper describes how they used open source information to 'backstop' the LANL-BNL team's effort to construct meaningful Additional Protocol Complementary Access training scenarios for each of the three DOE laboratories, Lawrence Livermore National Laboratory, Idaho National Laboratory, and Oak Ridge National Laboratory.

Sandoval, M Analisa [Los Alamos National Laboratory; Uribe, Eva C [Los Alamos National Laboratory; Sandoval, Marisa N [Los Alamos National Laboratory; Boyer, Brian D [Los Alamos National Laboratory; Stevens, Rebecca S [Los Alamos National Laboratory

2009-01-01T23:59:59.000Z

45

FUPWG Purpose, Policies, and Operations  

Broader source: Energy.gov [DOE]

Draft reportlast updated July 22, 2010discusses the purpose, policies, and operations of the Federal Utility Partnership Working Group (FUPWG).

46

Active Sites Additional Information | Department of Energy  

Energy Savers [EERE]

of millions of gallons of radioactive and chemical waste stored in large underground tanks; disposing of spent nuclear fuel; removing contaminated soil; treating contaminated...

47

Additional Information on the ERDF PA approach  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

435.1 and Order 5820.2A 1996 Completion of Crosswalk Between DOE Order 5820.2A and CERCLA Remedial Investigation Feasibility Study First Disposal Authorization Issued ERDF Opened...

48

Additional Information on the ERDF PA approach  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

of Energy Richland Operations Office River Corridor Closure Project DOE's Largest Environmental Cleanup Closure Project October 7, 2014 RIVER CORRIDOR CLOSURE PROJECT Protecting...

49

Additional Information on the ERDF PA approach  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

ROD for a CERCLA ARAR Waiver to Allow Treatment of Hazardous Debris within the ERDF Landfill U.S. Department of Energy Richland Operations Office River Corridor Closure Project...

50

Additive Manufacturing Technology Assessment  

Office of Environmental Management (EM)

subtractive manufacturing 41 methods 1. Additive manufacturing is also called as 3D printing, 42 additive fabrication, or freeform fabrication. These new 43 techniques, while...

51

Fish Camp Scholarship Information Fish Camp is a four-day orientation program that welcomes the Freshman class to Texas A&M each year with the purpose of giving  

E-Print Network [OSTI]

Fish Camp Scholarship Information Fish Camp is a four-day orientation program that welcomes friends, and learn more about life at Texas A&M! There are seven sessions of Fish Camp, which all take place during the month of August. Students interested in attending should register through the Fish Camp

52

Additive Manufacturing Technologies  

Science Journals Connector (OSTI)

Rapid Prototyping is the construction of complex three-dimensional parts using additive manufacturing technology.

Jrgen Stampfl; Markus Hatzenbichler

2014-01-01T23:59:59.000Z

53

General purpose programmable accelerator board  

DOE Patents [OSTI]

A general purpose accelerator board and acceleration method comprising use of: one or more programmable logic devices; a plurality of memory blocks; bus interface for communicating data between the memory blocks and devices external to the board; and dynamic programming capabilities for providing logic to the programmable logic device to be executed on data in the memory blocks.

Robertson, Perry J. (Albuquerque, NM); Witzke, Edward L. (Edgewood, NM)

2001-01-01T23:59:59.000Z

54

Additional Web Sites  

E-Print Network [OSTI]

7. HEALTH. American Medical Association American Heart Asspociation ... US Government Information Administration on Aging Health Care Financing...

55

Alternative Fuels Data Center: Latest Additions  

Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

Publications » Latest Additions Publications » Latest Additions Printable Version Share this resource Send a link to Alternative Fuels Data Center: Latest Additions to someone by E-mail Share Alternative Fuels Data Center: Latest Additions on Facebook Tweet about Alternative Fuels Data Center: Latest Additions on Twitter Bookmark Alternative Fuels Data Center: Latest Additions on Google Bookmark Alternative Fuels Data Center: Latest Additions on Delicious Rank Alternative Fuels Data Center: Latest Additions on Digg Find More places to share Alternative Fuels Data Center: Latest Additions on AddThis.com... Latest Additions Browse the latest additions to the publications database for current information about alternative transportation. December 2013 Clean Cities 2012 Annual Metrics Report Clean Cities Alternative Fuel Price Report, October, 2013

56

FUPWG Purpose, Policies, and Operations  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

FEDERAL UTILITY PARTNERSHIP WORKING GROUP FEDERAL UTILITY PARTNERSHIP WORKING GROUP Purpose, Policies and Operations Draft - For Review and Comment Only Table of Contents: I. Introduction II. Membership III. Steering Committee Membership and Responsibilities IV. Meetings V. Meeting Content VI. Future Direction Appendices: 1) Vision Statement 2) Edison Electric Institute (EEI) Commitment Statement 3) FUPWG Members 4) List of Steering Committee Members 5) List of Previous and planned Future Meetings 6) List of Topics Addressed By FUPWG 7) Speaker Guidelines 8) Host Responsibilities 1 Last Updated 7/22/2010 I. Introduction The Federal Utility Partnership Working Group (FUPWG or Working Group) was initiated by

57

FUPWG Purpose, Policies, and Operations  

Broader source: Energy.gov (indexed) [DOE]

FEDERAL UTILITY PARTNERSHIP WORKING GROUP FEDERAL UTILITY PARTNERSHIP WORKING GROUP Purpose, Policies and Operations Draft - For Review and Comment Only Table of Contents: I. Introduction II. Membership III. Steering Committee Membership and Responsibilities IV. Meetings V. Meeting Content VI. Future Direction Appendices: 1) Vision Statement 2) Edison Electric Institute (EEI) Commitment Statement 3) FUPWG Members 4) List of Steering Committee Members 5) List of Previous and planned Future Meetings 6) List of Topics Addressed By FUPWG 7) Speaker Guidelines 8) Host Responsibilities 1 Last Updated 7/22/2010 I. Introduction The Federal Utility Partnership Working Group (FUPWG or Working Group) was initiated by

58

Acoustics by additive manufacturing:.  

E-Print Network [OSTI]

??This study focuses on exploring the merging field of additive manufacturing and acoustics and introduces a new type of sound absorber which is regulating performance (more)

Setaki, F.

2012-01-01T23:59:59.000Z

59

EMERGENCY CONTACTS for DOWNER LAB Contact Phone After Hours Purpose/Additional Info  

E-Print Network [OSTI]

(Building-Related) 471-0043 471-2020 Plumbing/floods, fire sprinklers, heating/cooling, lighting, electrical whether to see a healthcare provider. For severe or potentially life-threatening medical or mental health

Shvets, Gennady

60

Electronic multi-purpose material level sensor  

DOE Patents [OSTI]

The present electronic multi-purpose material level sensor is based on time domain reflectometry (TDR) of very short electrical pulses. Pulses are propagated along a transmission line that is partially immersed in a liquid, powder, or other substance such as grain in a silo. The time difference of the reflections at the start of the transmission line and the air/liquid interface are used to determine levels to better than 0.01 inch. The sensor is essentially independent of circuit element and temperature variations, and can be mass produced at an extremely low price. The transmission line may be a Goubau line, microstrip, coaxial cable, twin lead, CPS or CPW, and may typically be a strip placed along the inside wall of a tank. The reflected pulses also contain information about strata within the liquid such as sludge-build-up at the bottom of an oil tank.

McEwan, Thomas E. (Livermore, CA)

1997-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "additional information purpose" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Electronic multi-purpose material level sensor  

DOE Patents [OSTI]

The present electronic multi-purpose material level sensor is based on time domain reflectometry (TDR) of very short electrical pulses. Pulses are propagated along a transmission line that is partially immersed in a liquid, powder, or other substance such as grain in a silo. The time difference of the reflections at the start of the transmission line and the air/liquid interface are used to determine levels to better than 0.01 inch. The sensor is essentially independent of circuit element and temperature variations, and can be mass produced at an extremely low price. The transmission line may be a Goubau line, microstrip, coaxial cable, twin lead, CPS or CPW, and may typically be a strip placed along the inside wall of a tank. The reflected pulses also contain information about strata within the liquid such as sludge-build-up at the bottom of an oil tank. 9 figs.

McEwan, T.E.

1997-03-11T23:59:59.000Z

62

Laser Technology: Additive Manufacturing  

Science Journals Connector (OSTI)

Selective Laser Sintering, and in general Additive Manufacturing Processes are becoming mature technologies; in the ... systems that are even utilized for direct parts manufacturing. However, the parts final user...

Srichand Hinduja; Lin Li

2013-01-01T23:59:59.000Z

63

Research Summary Carbon Additionality  

E-Print Network [OSTI]

of the quality assurance of emissions reduction and carbon sequestration activities, but remains a source of much/reporting additionality rules. Technological Application of specific technology. Term Abatement arises within a specified

64

Implementation Guide for Developing Technical Safety Requirements (Informational Purposes Only)  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

This draft has been scheduled for final review before the Directives Review Board on 2/19/2015. All major comments and concerns should be provided to your DRB representative by 2/17/2015, following your organization process. If you do not know who your representative is, please see the list of DRB members. If your office is represented by Ingrid Kolb, Director, Office of Management, please submit your major concerns and comments to the DRB Liaison, Camille Beben (Camille.Beben@hq.doe.gov; 202-586-1014).

2015-02-10T23:59:59.000Z

65

Nuclear Explosive and Weapon Surety Program (Informational Purposes Only)  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

This draft has been scheduled for final review before the Directives Review Board on 12-4-2014. All major comments and concerns should be provided to your DRB representative, following your organization process. If you do not know who your representative is, please see the list of DRB members at https://www.directives.doe.gov/beta/references/directives-review-board. If your office is represented by Ingrid Kolb, Director, Office of Management, please submit your major concerns and comments to the DRB Liaison, Camille Beben (Camille.Beben@hq.doe.gov; 202-586-4014). All major comments and concerns should be submitted by COB 12-2-2014.

2014-11-21T23:59:59.000Z

66

Official Foreign Travel (3-2-12) (Informational Purposes Only)  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

This draft directive is scheduled for review by the Directives Review Board on 3/15/12. Any questions, comments, or concerns with the proposed directive can be sent to your Directives Review Board representative (https://www.directives.doe.gov/references/directives-review-board-members) through your Directives Point of Contact (https://www.directives.doe.gov/development-review/dpc-corner/2010-10-1.pdf).

2012-03-12T23:59:59.000Z

67

PURPOSE The Energy Information Administration (EIA) Form EIA-820,  

E-Print Network [OSTI]

Annual Refinery Report, is used to collect data on current and projected capacities of all operable petroleum refineries. The data appear on EIAs website at www.eia.doe.gov and in numerous government publications. WHO MUST SUBMIT Form EIA-820 is mandatory pursuant to Section 13 (b) of the Federal Energy Administration Act of 1974 (Public Law 93-275) and must be completed by all operating and idle petroleum refineries (including new refineries under construction) and refineries shutdown during the previous year, located in the 50

unknown authors

68

Carbon Additionality: Discussion Paper  

E-Print Network [OSTI]

ahead, and identifying the carbon pools and other green house gas emissions sources and savings coveredCarbon Additionality: A review Discussion Paper Gregory Valatin November 2009 Forest Research. Voluntary Carbon Standards American Carbon Registry Forest Carbon Project Standard (ACRFCPS) 27 Carbon

69

OCRWM Bulletin: Westinghouse begins designing multi-purpose canister  

SciTech Connect (OSTI)

This publication consists of two parts: OCRWM (Office of Civilian Radioactive Waste Management) Bulletin; and Of Mountains & Science which has articles on the Yucca Mountain project. The OCRWM provides information about OCRWM activities and in this issue has articles on multi-purpose canister design, and transportation cask trailer.

NONE

1995-09-01T23:59:59.000Z

70

Guide to Email Marketing 1. Purpose  

E-Print Network [OSTI]

Guide to Email Marketing 1. Purpose The purpose of these standards is to provide consistent guidelines to the development of email marketing at Kent State marketing from Kent State are receiving the highest quality messages. Email

Palffy-Muhoray, Peter

71

This information describes typical occupations and employment settings associated with this major. Understand that some of these options may require additional training. Moreover, you are not limited to these options when choosing a possible career path.  

E-Print Network [OSTI]

clinical practice. Upon completion of all degree requirements, students are eligible to take the national@gmail.com To find additional clubs and organizations, go to the Center for Student Organizations at- http://stuorgs.uga.edu/find/index

Arnold, Jonathan

72

Appendix 1 -Additional iManage Systems  

Broader source: Energy.gov (indexed) [DOE]

- Additional iManage/Corporate Information Systems - Additional iManage/Corporate Information Systems In addition to STARS, STRIPES, IDW/iPortal, these are corporate systems maintained by the Office of Corporate Information Systems. These systems are currently not included as part of the requirements. Application/Project Automated Time and Attendance (ATAAPS) Budget and Reporting Code System (BARC) Budget Table System (BTS) Consent Order Tracking System (COTS) Consolidated Accounting and Investment System (CAIS) Departmental Audit Report Tracking System (DARTS) - Enhancements Departmental Audit Report Tracking System (DARTS) - Existing Departmental Inventory Management System (DIMS) DOEInfo eMailList ePerformance eRooms (Pensions) External CFO Website Folio (Portfolio Management) Funds Distribution System (FDS)

73

This information describes typical occupations and employment settings associated with this major. Understand that some of these options may require additional training. Moreover, you are not limited to these options when choosing a possible career path.  

E-Print Network [OSTI]

Agent Family Services Counselor Food Safety Food Service Manager HealthCare Consultant Information.M. Smucker Company The Partnership for Food Safety Ed Universities USDA Walton Co. School Nutrition Service Consultant Nutrition Educator Nutrition Specialist Program Analyst Project Manager Quality Foods Lab

Arnold, Jonathan

74

Directory of Energy Information Administration Models 1994  

SciTech Connect (OSTI)

This directory revises and updates the 1993 directory and includes 15 models of the National Energy Modeling System (NEMS). Three other new models in use by the Energy Information Administration (EIA) have also been included: the Motor Gasoline Market Model (MGMM), Distillate Market Model (DMM), and the Propane Market Model (PPMM). This directory contains descriptions about each model, including title, acronym, purpose, followed by more detailed information on characteristics, uses and requirements. Sources for additional information are identified. Included in this directory are 37 EIA models active as of February 1, 1994.

Not Available

1994-07-01T23:59:59.000Z

75

Additive Manufacturing for Mass Customization  

Science Journals Connector (OSTI)

Additive manufacturing (AM) is a disruptive manufacturing technology that requires no tooling for production....additively build parts from numerous materials, including polymers, metals and ceramics. Within this...

Phil Reeves; Chris Tuck; Richard Hague

2011-01-01T23:59:59.000Z

76

Kentucky Department for Natural Resources and Environmental Protection permit application for air contaminant source: SRC-I demonstration plant, Newman, Kentucky. Supplement I. [Additional information on 38 items requested by KY/DNREP  

SciTech Connect (OSTI)

In response to a letter from KY/DNREP, January 19, 1981, ICRC and DOE have prepared the enclosed supplement to the Kentucky Department for Natural Resources and Environmental Protection Permit Application for Air Contaminant Source for the SRC-I Demonstration Plant. Each of the 38 comments contained in the letter has been addressed in accordance with the discussions held in Frankfort on January 28, 1981, among representatives of KY/DNREP, EPA Region IV, US DOE, and ICRC. The questions raised involve requests for detailed information on the performance and reliability of proprietary equipment, back-up methods, monitoring plans for various pollutants, composition of wastes to flares, emissions estimates from particular operations, origin of baseline information, mathematical models, storage tanks, dusts, etc. (LTN)

none,

1981-02-13T23:59:59.000Z

77

Luminous Efficacy Standards for General Purpose Lights  

Broader source: Energy.gov [DOE]

Assembly Bill 178, adopted in June 2007, established efficacy* standards for general purpose lights sold in the state of Nevada. The bill set the required efficacy at 25 lumens per watt (lm/W) of...

78

Increasing the purity of additives  

Science Journals Connector (OSTI)

In the preparation of high-purity additives a low-temperature treatment with Galosha ... . In the preparation of high-purity sulfonate additives, a preliminary removal by settling of insoluble compounds must be...

A. L. Dol'berg

1969-06-01T23:59:59.000Z

79

Additive manufacturing method of producing  

E-Print Network [OSTI]

Additive manufacturing method of producing silver or copper tracks on polyimide film Problem/stripping) using an additive process support by a novel bio- degradable photo-initiator package. technology. Building on previous work by Hoyd- Gigg Ng et al. [1,2], Heriot-Watt has developed an additive film

Painter, Kevin

80

Object Exploration By Purposive, Dynamic Viewpoint Adjustment  

E-Print Network [OSTI]

. Unlike previous approaches where exploration is cast as a discrete process (i.e., asking where to look on the object surface that are occluded when the exploration process is initiated. Our goal is to designObject Exploration By Purposive, Dynamic Viewpoint Adjustment Kiriakos N. Kutulakos Charles R. Dyer

Dyer, Charles R.

Note: This page contains sample records for the topic "additional information purpose" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Conference Purpose: The 9th INTECOL International  

E-Print Network [OSTI]

Conference Purpose: The 9th INTECOL International Wetlands Conference will provide a platform. This conference seeks to share integrated solutions for sustainable management of wetland resources in a complex Attend: The conference provides an interdis- ciplinary setting for participants to review cutting edge

Slatton, Clint

82

Development of Additive Manufacturing Technology  

Science Journals Connector (OSTI)

Additive Manufacturing (AM) technology came about as a ... of different technology sectors. Like with many manufacturing technologies, improvements in computing power and reduction...

Dr. Ian Gibson; Dr. David W. Rosen

2010-01-01T23:59:59.000Z

83

Additive Manufacturing for Large Products.  

E-Print Network [OSTI]

?? This thesis researches the possibility and feasibility of applying additive manufacturing technology in the manufacturing of propellers. The thesis concerns the production at the (more)

Leirvg, Roar Nelissen

2013-01-01T23:59:59.000Z

84

1.0 Purpose and Need  

Broader source: Energy.gov (indexed) [DOE]

0 Purpose and Need 0 Purpose and Need The Western Area Power Administration (Western), created in 1977 under the Department of Energy (DOE) Organization Act (Public Law 95-91), markets and transmits electric power throughout 15 western states. Western's Sierra Nevada Customer Service Region (Sierra Nevada Region) markets approximately 1,480 megawatts (MW) of power from the Central Valley Project (CVP) and other sources and markets nonfirm energy from the Washoe Project. The Sierra Nevada Region's marketing area is shown in Figure 1.1. Western's mission is to market and transmit electricity that is in excess of CVP Project Use (power required for project operations), which for the Sierra Nevada Region is generated from CVP and Washoe Project powerplants. Western's power marketing

85

Nanoscale Additives Tailor Energetic Materials  

Science Journals Connector (OSTI)

Add to ACS ChemWorx ... The endothermic peak centered around 100 C corresponds to the removal of water with a weight loss of 5.9%. ... The amorphous and rutile additives had little effect on the HTD weight loss profile, while anatase accelerated the HTD and reduced the completion temperature from 453 C for pure AP to 423 C with the additive. ...

David L. Reid; Antonio E. Russo; Rodolphe V. Carro; Matthew A. Stephens; Alexander R. LePage; Thomas C. Spalding; Eric L. Petersen; Sudipta Seal

2007-06-12T23:59:59.000Z

86

Dual purpose solar collectors. Final technical report  

SciTech Connect (OSTI)

Use of a single energy solar collecting system for two purposes is described. First, during the summer, the system was installed at a community swimming pool to reduce cost of maintaining water temperature, and second, during the winter the system was moved to and installed in the city maintenance building to reduce heating costs. Data collected and analyzed about use of renewable energy sources were disseminated to communities of similar size to encourage like use of energy conservation practices.

Not Available

1980-01-01T23:59:59.000Z

87

Additional Resources | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Additional Resources Additional Resources Additional Resources October 16, 2013 - 4:36pm Addthis The following resources are focused on Federal new construction and major renovation projects, sustainable construction, and the role of renewable energy technologies in such facilities. These resources are organized by: Resource Guides Renewable Energy Planning Planning Construction Operations and Maintenance Commissioning Sample Plans and Documents Resource Guides Whole Building Design Guide (WBDG) WBDG: New Construction and Major Renovation Guiding Principles (WBDG) Leadership in Energy and Environmental Design (LEED) New Construction and Major Renovation Reference Guide Greening Federal Facilities: An Energy, Environmental, and Economic Resource Guide for Federal Facility Managers and Designers

88

SRS ECOLOGY ENVIRONMENTAL INFORMATION DOCUMENT -1997 UPDATE  

SciTech Connect (OSTI)

The purpose of the SRS Ecology: Environmental Information Document is to provide a source of information on the ecology of the Savannah River Site.

Halverson, N.V. [Westinghouse Savannah River Company, AIKEN, SC (United States); Wike, L.D.; Patterson, K.K.; Bowers, J.A.; Bryan, A.L.; Chen, K.F.; Cummins, C.L.; deCarmen, B.R.; Dixon, K.L.; Dunn, D.L. [and others

1997-12-31T23:59:59.000Z

89

Laser Additive Manufacturing of Metals  

Science Journals Connector (OSTI)

Laser Additive Manufacturing (LAM) is based on a repeating layer wise manufacturing process which uses a laser beam to ... ) geometries into simpler two-dimensional (2D) manufacturing steps [1, 2...]. Thus LAM of...

Claus Emmelmann; Jannis Kranz; Dirk Herzog; Eric Wycisk

2013-01-01T23:59:59.000Z

90

Laser Additive Manufacturing in GE  

Science Journals Connector (OSTI)

There has been an increasing interest given to laser additive manufacturing (LAM) in recent years from across the global. GE has been one of the leading industries engaging in this...

Peng, Henry; Li, Yanmin; Guo, Rui; Wu, Zhiwei

91

Metal Additive Manufacturing: A Review  

Science Journals Connector (OSTI)

This paper reviews the state-of-the-art of an important, rapidly emerging, manufacturing technology that is alternatively called additive manufacturing (AM), direct digital manufacturing, free form fabrication, o...

William E. Frazier

2014-06-01T23:59:59.000Z

92

For additional information, contact: Department of Native American Studies  

E-Print Network [OSTI]

in the nation. Focal Point for American Indian Issues The Department of Native American Studies is the focal point for most Indian students at Immersion School 2 LeeAnna Muzquiz, a graduate with a minor in NAS, is a physician on the Flathead Indian

Maxwell, Bruce D.

93

The global and local additivity problems in quantum information theory  

E-Print Network [OSTI]

Stinespring dilatation theorem: () = trB U() = trB UU, U = [A1 A2 . . . Ak ] Cm?kn Cap() := maxm2 ,ui Sm-1

Friedland, Shmuel

94

For additional information, contact: Department of Microbiology & Immunology  

E-Print Network [OSTI]

GORHAM KELLY GORHAM 1 Student Elliott Barnhart conducts research on coalbed methane 2 Student Kristen

Maxwell, Bruce D.

95

Magellan additional information | U.S. DOE Office of Science...  

Office of Science (SC) Website

r-next-cloud-supercomputing-instance External link ), Cloudcow ( http:www.cloudcow.comcontentpublic-clouds-scientific-applications-cost-13x-more External link ), Nttcom.tv (...

96

Additional Resources | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Services » Energy Assurance » Emergency Preparedness » Community Services » Energy Assurance » Emergency Preparedness » Community Guidelines » Additional Resources Additional Resources Additional Resources Energy Assurance Planning The Local Government Energy Assurance Planning (LEAP) program, developed by the Public Technology Institute and the U.S. Department of Energy, offers resources to help local governments of all sizes in developing energy assurance plans for their communities. U.S. Department of Energy, State and Local Energy Assurance Planning The National Association of State Energy Officials (NASEO) The National Association of Regulatory Utility Commissioners The National Response Framework Public Emergency Management Organizations U.S. Federal Emergency Management Agency (FEMA) FEMA disaster assistance State governor's office

97

Final Information Quality Bulletin for Peer Review  

Broader source: Energy.gov (indexed) [DOE]

04 04 OFFICE OF MANAGEMENT AND BUDGET Final Information Quality Bulletin for Peer Review INTRODUCTION This Bulletin establishes that important scientific information shall be peer reviewed by qualified specialists before it is disseminated by the federal government. We published a proposed Bulletin on September 15, 2003. Based on public comments, we published a revised proposal for additional comment on April 28, 2004. We are now finalizing the April version, with minor revisions responsive to the public's comments. The purpose of the Bulletin is to enhance the quality and credibility of the government's scientific information. We recognize that different types of peer review are appropriate for different types of information. Under this Bulletin, agencies are granted broad

98

U. S. Government purposes. LS-253  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

W·31·10!rENG·38. W·31·10!rENG·38. Accordingly. the U. S. Government retains a nonexclusive, royalty-free license to publish Or reproduce the published form of this contribution, or allow others to do so, for U. S. Government purposes. LS-253 A Shimming Technique for Improvement of the Spectral Performance of APS Undulator A I. Vasserman Experimental Facilities Division, APS January 9, 1996 Advanced Photon Source Argonne National Laboratory A shimming technique for improvement of the spectral performance of APS Undulator A 1. Vasserman Advanced Photon Source, Argonne National Laboratory, Argonne, IL 60439 TABLE OF CONTENTS 1. Introduction 2. The shimming technique: calculations and experimental results 3. Conclusion 4 Acknowledgments 5 References 1. Introduction

99

Detailed Information Standard  

E-Print Network [OSTI]

The purpose of this standard is to increase the required information that must accompany any parts submitted to the Registry of Standard Biological Parts. This will give users of the parts better assurance of their ...

Culviner, Peter

2010-12-05T23:59:59.000Z

100

Energy information sheets  

SciTech Connect (OSTI)

The National Energy Information Center (NEIC), as part of its mission, provides energy information and referral assistance to Federal, State, and local governments, the academic community, business and industrial organizations, and the public. The Energy Information Sheets was developed to provide general information on various aspects of fuel production, prices, consumption, and capability. Additional information on related subject matter can be found in other Energy Information Administration (EIA) publications as referenced at the end of each sheet.

NONE

1995-07-01T23:59:59.000Z

Note: This page contains sample records for the topic "additional information purpose" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

A Primer on Food Additives.  

E-Print Network [OSTI]

of their workers. The readers' loud reactions became a pow erful, moving force that helped persuade Con gress to pass the Pure Food and Drugs Act of 1906 as well as the Meat Inspection Act of the same year. The First Food Revolution Before the Civil War.... Factory conditions began to improve. Now that there was a law, complete with inspections and penalties for convicted transgressors, the food additive situation began to change, as did attitudes toward sanitation. The 1906 law de fined as adulterated...

Anonymous,

1979-01-01T23:59:59.000Z

102

Information theory based on nonadditive information content  

Science Journals Connector (OSTI)

We generalize Shannons information theory in a nonadditive way by focusing on the source coding theorem. The nonadditive information content we adopted is consistent with the concept of the form invariance structure of the nonextensive entropy. Some general properties of the nonadditive information entropy are studied, in addition, the relation between the nonadditivity q and the codeword length is pointed out.

Takuya Yamano

2001-03-23T23:59:59.000Z

103

Information Request  

Broader source: Energy.gov (indexed) [DOE]

November 25, 2008 November 25, 2008 TO: Sue Tierney, Phil Niedzielski-Eichner, Skila Harris FROM: Chris Kouts SUBJECT: Information Request As requested, enclosed is the additional information you requested yesterday. 1. Testimony: * September 24, 2008 before the Senate Committee on Commerce, Science and Transportation, * July 15, 2008 before the House Committee on Energy and Commerce * October 4, 2007 before the House Committee on the Budget and Chairman Spratt 2. Proposed Legislation "Nuclear Fuel Management and Disposal Act" submitted to Congress March 6, 2007 3. State-by-State Maps that outline each state's electricity generation mix, commercial spent nuclear fuel inventories, and payments into the Nuclear Waste Fund The additional information on the history of the use of engineered barriers will be

104

Recommendation 212: Evaluate additional storage and disposal...  

Office of Environmental Management (EM)

212: Evaluate additional storage and disposal options Recommendation 212: Evaluate additional storage and disposal options The ORSSAB encourages DOE to evaluate additional storage...

105

Precision and Energy Usage for Additive Manufacturing  

E-Print Network [OSTI]

Sustainability of additive manufacturing: measuring theCommittee F42 on Additive Manufacturing Technologies," TheASTM Committee F42 on Additive Manufacturing Technologies. -

Clemon, Lee; Sudradjat, Anton; Jaquez, Maribel; Krishna, Aditya; Rammah, Marwan; Dornfeld, David

2013-01-01T23:59:59.000Z

106

Biomass 2014: Additional Speaker Biographies | Department of...  

Broader source: Energy.gov (indexed) [DOE]

4: Additional Speaker Biographies Biomass 2014: Additional Speaker Biographies This document outlines the biographies of the additional speakers for Biomass 2014, held July 29-July...

107

Electrolytes - Advanced Electrolyte and Electrolyte Additives...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

and Electrolyte Additives Develop & evaluate materials & additives that enhance thermal & overcharge abuse Advanced Electrolyte Additives for PHEVEV Lithium-ion Battery...

108

PNP General Purpose Amplifier This device is designed for general purpose amplifier and switching  

E-Print Network [OSTI]

purpose amplifier and switching applications at collector currents of 10 µA to 100 mA. Absolute Maximum - Continuous 200 mA TJ, Tstg Operating and Storage Junction Temperature Range -55 to +150 °C 2001 Fairchild-Emitter Breakdown Voltage* IC = 1.0 mA, IB = 0 40 V V(BR)CBO Collector-Base Breakdown Voltage IC = 10 µA, IE = 0 40

Ravikumar, B.

109

NPN General Purpose Amplifier This device is designed as a general purpose amplifier and switch.  

E-Print Network [OSTI]

as a general purpose amplifier and switch. The useful dynamic range extends to 100 mA as a switch and to 100-Base Voltage 6.0 V IC Collector Current - Continuous 200 mA TJ, Tstg Operating and Storage Junction Temperature Parameter Test Conditions Min Max Units V(BR)CEO Collector-Emitter Breakdown Voltage IC = 1.0 mA, IB = 0 40

Ravikumar, B.

110

Wellness & Additional Benefits | Careers | ORNL  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Working at ORNL Working at ORNL Benefits Wellness and Other Incentives View Open Positions View Postdoctoral Positions Create A Profile Internal applicants please apply here View or update your current application or profile. External applicants Internal applicants Internet Explorer Browser preferred for ORNL applicants. Chrome is not currently supported. For more information about browser compatibility please refer to the FAQs. If you have difficulty using the online application system or need an accommodation to apply due to a disability, please email ORNLRecruiting@ornl.gov or phone 1-866-963-9545 Careers Home | ORNL | Careers | Working at ORNL | Wellness and Other Incentives SHARE Wellness & Additional Benefits Wellness Program Employees have many opportunities to maintain and improve their health

111

-transform MATLAB Laboratory Experiment Purpose: This experiment presents the frequency domain analysis of discrete-time  

E-Print Network [OSTI]

5.6 -transform MATLAB Laboratory Experiment Purpose: This experiment presents the frequency domain analysis of discrete-time systems using MATLAB. The impulse, step, sinusoidal, and exponential on the ¡ -transform. In addition, MATLAB will be used to perform the partial fraction expansion and to find

Gajic, Zoran

112

Preliminary Report on Dual-Purpose Canister Disposal Alternatives (FY13) |  

Broader source: Energy.gov (indexed) [DOE]

Preliminary Report on Dual-Purpose Canister Disposal Alternatives Preliminary Report on Dual-Purpose Canister Disposal Alternatives (FY13) Preliminary Report on Dual-Purpose Canister Disposal Alternatives (FY13) This report documents the first phase of a multi-year project to understand the technical feasibility and logistical implications of direct disposal of spent nuclear fuel (SNF) in existing dual-purpose canisters (DPCs) and other types of storage casks. The first phase includes a set of preliminary disposal concepts and associated technical analyses, identification of additional R&D needs, and a recommendation to proceed with the next phase of the evaluation effort. Preliminary analyses indicate that DPC direct disposal could be technically feasible, at least for certain disposal concepts. DPC disposal concepts include the salt concept, and emplacement

113

System-Level Logistics for Dual Purpose Canister Disposal  

SciTech Connect (OSTI)

The analysis presented in this report investigated how the direct disposal of dual purpose canisters (DPCs) may be affected by the use of standard transportation aging and disposal canisters (STADs), early or late start of the repository, and the repository emplacement thermal power limits. The impacts were evaluated with regard to the availability of the DPCs for emplacement, achievable repository acceptance rates, additional storage required at an interim storage facility (ISF) and additional emplacement time compared to the corresponding repackaging scenarios, and fuel age at emplacement. The result of this analysis demonstrated that the biggest difference in the availability of UNF for emplacement between the DPC-only loading scenario and the DPCs and STADs loading scenario is for a repository start date of 2036 with a 6 kW thermal power limit. The differences are also seen in the availability of UNF for emplacement between the DPC-only loading scenario and the DPCs and STADs loading scenario for the alternative with a 6 kW thermal limit and a 2048 start date, and for the alternatives with a 10 kW thermal limit and 2036 and 2048 start dates. The alternatives with disposal of UNF in both DPCs and STADs did not require additional storage, regardless of the repository acceptance rate, as compared to the reference repackaging case. In comparison to the reference repackaging case, alternatives with the 18 kW emplacement thermal limit required little to no additional emplacement time, regardless of the repository start time, the fuel loading scenario, or the repository acceptance rate. Alternatives with the 10 kW emplacement thermal limit and the DPCs and STADs fuel loading scenario required some additional emplacement time. The most significant decrease in additional emplacement time occurred in the alternative with the 6 kW thermal limit and the 2036 repository starting date. The average fuel age at emplacement ranges from 46 to 88 years. The maximum fuel age at emplacement ranges from 81 to 146 years. The difference in the average and maximum age of fuel at emplacement between the DPC-only and the DPCs and STADs fuel loading scenarios becomes less significant as the repository thermal limit increases and as the repository start date increases. In general, the role of STADs is to store young (30 year or younger) high burnup (45 GWD/MTU or higher) fuel. Recommendations for future study include detailed evaluation of the feasible alternatives with regard to the costs and factors not considered in this analysis, such as worker dose, dose to members of the public, and economic benefits to host entities. It is also recommended to conduct an additional analysis to evaluate the assumption regarding the transportability and disposability of DPCs for the next iteration of the direct disposal of DPCs study.

Kalinina, Elena A.

2014-06-03T23:59:59.000Z

114

Project Website Information Architecture  

E-Print Network [OSTI]

Project Website Information Architecture Overview Purpose: To describe up front what your initiative/project does. This section does not need to literally be called "Overview;" you can come up with anther suitable title that is more specific to your project. Examples of what to include: Information

115

Sources of information utilized by California agricultural interest groups  

E-Print Network [OSTI]

objectives were used to accomplish the purpose of the study: 1. Identify specific purposes for which lobbyists use this information (i.e., for lobbying/other political purposes, public education/awareness campaigns, responding to various member...

Noble, Elisa Lynn

2006-10-30T23:59:59.000Z

116

Economics of dual purpose production alternatives in the Mexican tropics  

E-Print Network [OSTI]

Technological, marketing, and financial alternatives to the dual purpose production system in Central Veracruz, Mexico were analyzed to assess their economic viability. A large dual purpose production operation was characterized in a baseline...

Ochoa-Ochoa, Rene Federico

1997-01-01T23:59:59.000Z

117

Open Energy Information Systems  

Broader source: Energy.gov (indexed) [DOE]

OpenEIS (energy information OpenEIS (energy information systems) Jessica Granderson Lawrence Berkeley National Laboratory JGranderson@lbl.gov, 510.486.6792 April 3, 2013 2 | Building Technologies Office eere.energy.gov Purpose & Objectives Problem Statement: Advanced algorithms and analyses can enable 5-40% savings, yet are rarely adopted; 3 relevant barriers include: 1. Lack of awareness that simple analytics can be used to generate valuable insights and actionable information, without further training

118

Open Energy Information Systems  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

OpenEIS (energy information OpenEIS (energy information systems) Jessica Granderson Lawrence Berkeley National Laboratory JGranderson@lbl.gov, 510.486.6792 April 3, 2013 2 | Building Technologies Office eere.energy.gov Purpose & Objectives Problem Statement: Advanced algorithms and analyses can enable 5-40% savings, yet are rarely adopted; 3 relevant barriers include: 1. Lack of awareness that simple analytics can be used to generate valuable insights and actionable information, without further training

119

Potential Carcinogenicity of Food Additives and Contaminants  

Science Journals Connector (OSTI)

...Carcinogenicity of Food Additives and Contaminants 1...RESEARCH VOL.35 Food Additives and Contaminants argument...substance that caused removal of the cranberries...consideration was given to the removal of Tween 60 as a food additive. The compound has...

Philippe Shubik

1975-11-01T23:59:59.000Z

120

Faculty Position in Mechanical Engineering Additive Manufacturing  

E-Print Network [OSTI]

Faculty Position in Mechanical Engineering Additive Manufacturing University of Kansas of additive manufacturing. Exceptional candidates with outstanding qualifications could be considered using additive manufacturing in applications such as, but not limited to the net shape manufacture of

Note: This page contains sample records for the topic "additional information purpose" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Additional Guidance Regarding Application of Current Procedures...  

Broader source: Energy.gov (indexed) [DOE]

Additional Guidance Regarding Application of Current Procedures for Testing Energy Consumption of Clothes Washers with Warm Rinse Cycles, Issued: June 30, 2010 Additional Guidance...

122

Electrolytes - Advanced Electrolyte and Electrolyte Additives  

Broader source: Energy.gov (indexed) [DOE]

program to develop additives for increased cycle, calendar life, and safety Develop advanced quantum chemical models to understand and predict functional additives that form...

123

Geographic information systems (GIS) for geologic mapping  

SciTech Connect (OSTI)

The computer-based Geographic Information System (GIS) is a powerful and versatile tool for preparation of geologic maps. Using GIS different types of geographically oriented information can be displayed on a common base in a flexible format that facilitates examination of relationships between the types of information. In addition, text-based and graphic information (attributes) from separate databases can be attached to points, lines or areas within the different map layers. Although GIS has enormous potential for geologic mapping, it must be used with care. Key considerations when using GIS include realistic representation of the geology, choice of an appropriate scale for the maps, and comparison of the computer-generated maps with field observations to maintain quality control. In building multilayer GIS maps, the data sources must be at a scale appropriate to the intended use. Information derived from diverse sources must be examined carefully to assure that it is valid at the scale of representation required. Examples of GIS products created for one purpose, but potentially misused for a different purpose, include formation contacts (lines) on a regional geologic map scaled up for a facility siting study or well locations on a small-scale location map subsequently contoured for contaminant plume prediction at a very large scale. In using GIS to prepare geologic maps, it is essential to have a clear rationale for the map and use an appropriate scale to depict the various layers of information. The authors of GIS-based geologic maps must be aware that the attractive, polished appearance of their products may tempt some end users to stretch and misinterpret the information displayed.

Schock, S.C. (Environmental Protection Agency, Cincinnati, OH (United States). Center for Environmental Research Information)

1993-03-01T23:59:59.000Z

124

Streamlining the additive manufacturing digital spectrum: A systems approach  

Science Journals Connector (OSTI)

Abstract Additive manufacturing (AM) promises great potential benefits for industrial manufacturers who require low volume and functional, highly complex, end-use products. Commercial adoption of AM has been slow due to factors such as quality control, production rates, and repeatability. However, given AM's potential, numerous research efforts are underway to improve the quality of the product realization process. A major area of opportunity is to complement existing efforts with advancements in end-to-end digital implementations of AM processes. New paradigms are needed to support more efficient and consistent design-to-product transformations. Systematically configured digital implementations would facilitate informational transformations through standard interfaces, streamlining the AM digital spectrum. Here, we propose the development of a federated, information systems architecture for additive manufacturing. We establish an information requirements workflow for streamlining information throughput during product realization. The architecture is delivered through the development of a solution stack, including the identification of areas where advancements in information representations will have the highest impact. The architecture will specify the stages of the product realization process, and the interfaces needed to link those stages together. Common data structures and interfaces will allow developers and end users of additive manufacturing technologies to simplify, coordinate, validate, and verify end-to-end digital implementations.

Duck Bong Kim; Paul Witherell; Robert Lipman; Shaw C. Feng

2014-01-01T23:59:59.000Z

125

Out of Bounds Additive Manufacturing Christopher  

E-Print Network [OSTI]

#12;Out of Bounds Additive Manufacturing Christopher Holshouser, Clint Newell, and Sid Palas, Tenn. The Big Area Additive Manufacturing system has the potential to manufacture parts completely) are working on an additive manufacturing (AM) system (Big Area Additive Manufacturing, or BAAM) capable

Pennycook, Steve

126

Customization of technology roadmaps according to roadmapping purposes: Overall process and detailed modules  

Science Journals Connector (OSTI)

Recently, technology roadmap has received increasing interest from academics and practitioners alike, as it is a powerful and inherently flexible approach in terms of architectural structure and construction process. However, the potential benefit may not be fully exploited due to the difficulty in customizing roadmaps to fit specific needs and/or to accommodate unusual circumstances. In response, the main purpose of this research is to provide guidance for customizing roadmaps. Specifically, we adopt a modularization method for mass customization and suggest a set of different roadmaps for different purposes such as forecasting, planning, and administration. In addition, a web-based system is developed to facilitate the roadmapping activities, which in turn ensures the creation, dissemination, and upkeep of roadmaps. With the system having a customization function, a set of customized roadmaps can be generated simply by selecting the application purpose and then meeting the input requirements. The function helps prospective users design roadmap formats and contents.

Sungjoo Lee; Yongtae Park

2005-01-01T23:59:59.000Z

127

Directory of Energy Information Administration Models 1993  

SciTech Connect (OSTI)

This directory contains descriptions about each model, including the title, acronym, purpose, followed by more detailed information on characteristics, uses, and requirements. Sources for additional information are identified. Included in this directory are 35 EIA models active as of May 1, 1993. Models that run on personal computers are identified by ``PC`` as part of the acronym. EIA is developing new models, a National Energy Modeling System (NEMS), and is making changes to existing models to include new technologies, environmental issues, conservation, and renewables, as well as extend forecast horizon. Other parts of the Department are involved in this modeling effort. A fully operational model is planned which will integrate completed segments of NEMS for its first official application--preparation of EIA`s Annual Energy Outlook 1994. Abstracts for the new models will be included in next year`s version of this directory.

Not Available

1993-07-06T23:59:59.000Z

128

Directory of energy information administration models 1995  

SciTech Connect (OSTI)

This updated directory has been published annually; after this issue, it will be published only biennially. The Disruption Impact Simulator Model in use by EIA is included. Model descriptions have been updated according to revised documentation approved during the past year. This directory contains descriptions about each model, including title, acronym, purpose, followed by more detailed information on characteristics, uses, and requirements. Sources for additional information are identified. Included are 37 EIA models active as of February 1, 1995. The first group is the National Energy Modeling System (NEMS) models. The second group is all other EIA models that are not part of NEMS. Appendix A identifies major EIA modeling systems and the models within these systems. Appendix B is a summary of the `Annual Energy Outlook` Forecasting System.

NONE

1995-07-13T23:59:59.000Z

129

Mobile Device Security Policy 1.0 Purpose  

E-Print Network [OSTI]

Mobile Device Security Policy COE­MDS­01 1.0 Purpose The purpose of this policy is to establish security requirements for mobile devices to prevent sensitive or confidential data from being lost or compromised. A wide variety of mobile devices contain electronically stored data including, but not limited to

Demirel, Melik C.

130

Stream and Memory Hierarchy Design for Multi-Purpose Accelerators  

E-Print Network [OSTI]

Stream and Memory Hierarchy Design for Multi-Purpose Accelerators Sylvain Girbal, Sami Yehia Hugues-purpose loop-based generated accelerators have emerged as an especially attractive accelerator option, with multiple streams, the memory behavior of such accelerators can become at least as complex

Boyer, Edmond

131

University of Oxford Transgender Policy Purpose of this policy  

E-Print Network [OSTI]

University of Oxford Transgender Policy Purpose of this policy 1. The purpose of this policy the process of gender reassignment. The policy and associated guidance give more detail on how the Universitys Equality Policy applies to transgender people. 2. This policy also supports members of the University

Henderson, Gideon

132

Component-based General-purpose Operating System Martin Decky  

E-Print Network [OSTI]

Component-based General-purpose Operating System Martin Deck´y Charles University, Faculty to apply this programming and design paradigm in the domain of general-purpose operating systems. This paper analyzes several nice properties of component systems which might be beneficial in operating

133

Smart Grid Information Clearinghouse (SGIC) | Open Energy Information  

Open Energy Info (EERE)

Smart Grid Information Clearinghouse (SGIC) Smart Grid Information Clearinghouse (SGIC) Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Smart Grid Information Clearinghouse (SGIC) Agency/Company /Organization: Smart Grid Information Clearinghouse Sector: Energy Focus Area: People and Policy Phase: Create a Vision, Evaluate Options, Develop Goals, Prepare a Plan Resource Type: Guide/manual User Interface: Website Website: www.sgiclearinghouse.org/ Cost: Free Logo: Smart Grid Information Clearinghouse (SGIC) Overview The purpose of the Smart Grid Information Clearinghouse (SGIC) portal is to provide information on the smart grid including demonstration projects, case studies, standards, legislation, policy and regulation, lessons learned and best practices, and research and development work. It collects

134

Energy information sheets  

SciTech Connect (OSTI)

The National Energy Information Center (NEIC), as part of its mission, provides energy information and referral assistance to Federal, State, and local governments, the academic community, business and industrial organizations, and the general public. Written for the general public, the EIA publication Energy Information Sheets was developed to provide information on various aspects of fuel production, prices, consumption and capability. The information contained herein pertains to energy data as of December 1991. Additional information on related subject matter can be found in other EIA publications as referenced at the end of each sheet.

Not Available

1993-12-02T23:59:59.000Z

135

Additive Manufacturing: Implications on Research and Manufacturing  

E-Print Network [OSTI]

Additive Manufacturing: Implications on Research and Manufacturing With recent developments, etc.), additive manufacturing (AM) has the potential to become a transformative technology in innovation-based manufacturing. Agencies such as the Department of Defense, the National Science Foundation

Crawford, T. Daniel

136

ARM - Public Information Materials  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

govPublicationsPublic Information Materials govPublicationsPublic Information Materials Publications Journal Articles Conference Documents Program Documents Technical Reports Publications Database Public Information Materials Image Library Videos Publication Resources Submit a Publication Publishing Procedures ARM Style Guide (PDF, 448KB) Acronyms Glossary Logos Contacts RSS for Publications Public Information Materials The ARM Climate Research Facility develops public information materials to communicate the purpose and objectives of the program to general audiences. These materials are designed to increase awareness of ARM Climate Research Facility goals and to document its scientific results to a lay audience. Public information materials include fact sheets, brochures, CDs, videos, press releases, and information packets. Approved materials are made

137

Webinar: Additive Manufacturing for Fuel Cells  

Broader source: Energy.gov [DOE]

Video recording and text version of the webinar titled "Additive Manufacturing for Fuel Cells," originally presented on February 11, 2014.

138

Electrolytes - Advanced Electrolyte and Electrolyte Additives  

Broader source: Energy.gov (indexed) [DOE]

Bedrov, University of Utah * Kevin Gering, INEL * Oleg Borodin, ARL * Enerdel * JSaft Partners Overview Integrated theoreticalexperimental program to develop additives...

139

Potential Carcinogenicity of Food Additives and Contaminants  

Science Journals Connector (OSTI)

...Carcinogenicity of Food Additives and Contaminants 1...as a result of the manufacturing process used; an example...Specifi cations of food additives are of immense significance...use of DES as a food additive for cattle. I am unable...occupational hazards from manufacturing these materials even...

Philippe Shubik

1975-11-01T23:59:59.000Z

140

EFFECTIVE STRUCTURAL HEALTH MONITORING WITH ADDITIVE MANUFACTURING  

E-Print Network [OSTI]

will be presented for components that can be processed by additive manufacturing (AM) or 3D printing. The origin structures. KEYWORDS : structural health monitoring methodology, 3D printing, additive manufacturing, fatigue, intelligent structure INTRODUCTION Additive manufacturing (AM), also known as 3D Printing or Rapid

Boyer, Edmond

Note: This page contains sample records for the topic "additional information purpose" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Towards Mobile Microrobot Swarms for Additive Micromanufacturing  

E-Print Network [OSTI]

of independently controlled microrobots in advanced, additive manufacturing applications. Keywords Mobile Microrobotics, Multi-robot Control, Additive Manufacturing 1. Introduction Flexible manufacturing capabilities, and additive manufacturing has proven to be a disruptive technology at the small- to medium-scale. Many

Zavlanos, Michael

142

Geneial Information  

Office of Legacy Management (LM)

--- _____ --- _____ ii3 ' 6 f Geneial Information su-u+./ I The Commission maintains a residue storage area known as the Airport Site at Robertson, l Missouri. This site is located immediately north of the St. Louis Municipal Airport and east of the McIknnell Aircraft Corporation Plant on Rr~wn Road in St. Louis County. Consent to use and occupy the 21.7 acre tract was obtalned by the Manhattan Dlstrlot on Marsh 2, 19&6. T!ltle uas auqubed to the property on Janwry 3, 1947 by condemnation proceeding8 for ~%20,000. It was aerquired for the purpose of storing residues fxvm the llestrehan Street Refinery and the Metal Plant at Plant 4. A coveredcoarrrete storage pad &t x 250' was constructed for storing drums. A concrete pit 202' x 42* x 16' was constructed to store radium bearing residues (K-6). Ihe area was enclosed with a chaiu-

143

INFORMATION COMPETENCE PROGRAM Loyola College and College of Notre Dame  

E-Print Network [OSTI]

INFORMATION COMPETENCE PROGRAM for Loyola College and College of Notre Dame The skills of analysis was. (Boyer Commission) Statement of Purpose Information literacy is the ability to access, evaluate, organize, and use information ethically to meet a need. The purpose of the Information Competence Program

Morrell, Christopher H.

144

Informational power of quantum measurements  

SciTech Connect (OSTI)

We introduce the informational power of a quantum measurement as the maximum amount of classical information that the measurement can extract from any ensemble of quantum states. We prove the additivity by showing that the informational power corresponds to the classical capacity of a quantum-classical channel. We restate the problem of evaluating the informational power as the maximization of the accessible information of a suitable ensemble. We provide a numerical algorithm to find an optimal ensemble and quantify the informational power.

Dall'Arno, Michele; D'Ariano, Giacomo Mauro [Quit Group, Dipartimento di Fisica 'A. Volta', via A. Bassi 6, I-27100 Pavia (Italy); Istituto Nazionale di Fisica Nucleare, Gruppo IV, via A. Bassi 6, I-27100 Pavia (Italy); Sacchi, Massimiliano F. [Quit Group, Dipartimento di Fisica 'A. Volta', via A. Bassi 6, I-27100 Pavia (Italy); Istituto di Fotonica e Nanotecnologie (INF-CNR), Piazza Leonardo da Vinci 32, I-20133, Milano (Italy)

2011-06-15T23:59:59.000Z

145

Energy information sheets, July 1998  

SciTech Connect (OSTI)

The National Energy Information Center (NEIC), as part of its mission, provides energy information and referral assistance to Federal, State, and local governments, the academic community, business and industrial organizations, and the public. The Energy Information Sheets was developed to provide general information on various aspects of fuel production, prices, consumption, and capability. Additional information on related subject matter can be found in other Energy Information Administration (EIA) publications as referenced at the end of each sheet.

NONE

1998-07-01T23:59:59.000Z

146

Energy information sheets, September 1996  

SciTech Connect (OSTI)

The National Energy Information Center (NEIC), as part of its mission, provides energy information and referral assistance to Federal, State, and local governments, the academic community, business and industrial organizations, and the public. The Energy Information Sheets was developed to provide general information on various aspects of fuel production, prices, consumption, and capability. Additional information on related subject matter can be found in other Energy Information Administration (EIA) publications as referenced at the end of each sheet.

NONE

1996-09-01T23:59:59.000Z

147

Directory of Energy Information Administration models, 1990  

SciTech Connect (OSTI)

This directory revises and updates the Directory of Energy Information Administration Models, DOE/EIA-0293(89), Energy Information Administration (EIA), US Department of Energy, May 1989. The major changes are the inclusion of the Building Energy End-Use Model (BEEM-PC), Residential Energy End-Use Model (REEM-PC), the Refinery Yield Model Spreadsheet System (RYMSS-PC), and the Capital Stock Model (CAPSTOCK-PC). Also, the following models have been inactivated: Energy Disaggregated Input-Output Model (EDIO), Household Model of Energy (HOME3-PC), Commercial Sector Energy Model (CSEM-PC), Outer Continental Shelf Oil and Gas Supply Model (OCSM), and the Stock Module of the Intermediate Future Forecasting System (STOCK). This directory contains descriptions about each basic and auxiliary model, including the title, acronym, purpose, and type, followed by more detailed information on characteristics, uses, and requirements. For developing models, limited information is provided. Sources for additional information are identified. Included in this directory are 38 EIA models active as of March 1, 1990, as well as the PC-AEO Forecasting Model Overview and the three Subsystems for the Short-Term Integrated Forecasting System (STIFS) Model. Models that run on personal computers are identified by PC'' as part of the acronym.

Not Available

1990-06-04T23:59:59.000Z

148

Chapter 1 Purpose of and Need for Action  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

and Acronyms. Chapter 1 Purpose of and Need for Action Bonneville Power Administration (BPA) is proposing to build a 500-kilovolt (kV) lattice-steel tower transmission line that...

149

President's Commission on Sustainability Charter Article I Purpose and Definitions  

E-Print Network [OSTI]

sustainability for public institutions of higher education. To creatively address sustainability, the PCS natural resources, and to integrate sustainability into existing educational, operational, researchPresident's Commission on Sustainability Charter Article I ­ Purpose and Definitions Section 1

Duchowski, Andrew T.

150

Feature tracking for visual servoing purposes ric Marchand, Franois Chaumette  

E-Print Network [OSTI]

Feature tracking for visual servoing purposes ?ric Marchand, François Chaumette IRISA - INRIA experiments ordered by subjective increasing difficulties. Email addresses: marchand@irisa.fr (?ric Marchand

Paris-Sud XI, Université de

151

Labor Standards Compliance, Contractor Labor Relations, and Contractor Workforce Restructuring Programs (For Informational Purposes Only)  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

This draft has been scheduled for final review before the Directives Review Board on 07/17/14. All major comments and concerns should be provided to your DRB representative, following your organization process. If you do not know who your representative is, please see the list of DRB members. If your office is represented by Ingrid Kolb, Director, Office of Management, please submit your major concerns and comments to the DRB Liaison, Camille Beben (Camille.Beben@hq.doe.gov; 202-586-1014). All major comments and concerns should be submitted by COB 07/16/2014.

2014-07-09T23:59:59.000Z

152

Preventing and Responding to All Forms of Violence in the Workplace (Informational Purposes Only)  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

This draft has been scheduled for final review before the Directives Review Board on 9/4/14. All major comments and concerns should be provided to your DRB representative, following your organization process. If you do not know who your representative is, please see the list of DRB members at https://www.directives.doe.gov/beta/references/directives-review-board. If your office is represented by Ingrid Kolb, Director, Office of Management, please submit your major concerns and comments to the DRB Liaison, Camille Beben (Camille.Beben@hq.doe.gov; 202-586-1014). All major comments and concerns should be submitted by COB 9/2/2014.

2014-08-26T23:59:59.000Z

153

Contractor Human Resource Management Program, Chapter VII, Risk Management and Insurance Programs (For Informational Purposes Only)  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

This draft has been scheduled for final review before the Directives Review Board on 07/17/14. All major comments and concerns should be provided to your DRB representative, following your organization process. If you do not know who your representative is, please see the list of DRB members. If your office is represented by Ingrid Kolb, Director, Office of Management, please submit your major concerns and comments to the DRB Liaison, Camille Beben (Camille.Beben@hq.doe.gov; 202-586-1014). All major comments and concerns should be submitted by COB 07/16/2014.

2014-07-09T23:59:59.000Z

154

Scanning with a Purpose Supporting the Fair Information Principles in RFID Protocols  

E-Print Network [OSTI]

capabilities ev- erywhere, embedded in the environment in such a way that they can be used without noticing-cited smart fridge are just some of the consumer applications that would benefit from post-point-of-sales item

155

Department of Energy Personal Property Management Program (3-7-12) (Informational Purposes Only)  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

This draft directive is scheduled for review by the Directives Review Board on 3/15/12. Any questions, comments, or concerns with the proposed directive can be sent to your Directives Review Board representative (https://www.directives.doe.gov/references/directives-review-board-members) through your Directives Point of Contact (https://www.directives.doe.gov/development-review/dpc-corner/2010-10-1.pdf).

2012-03-12T23:59:59.000Z

156

A major purpose of the Techni-Information Center k to provide  

E-Print Network [OSTI]

measurement of the ground shock produced by the explosions. 1. INTRODUCTION Th~ underground nuclear test where all U.S. underground nuclear testing Is conducted. In this regard we have initiated a program testing as related to undergrouti nuclear testing. Scaie modeling of explosions to simulate the attack

157

Additional Funding & Financing Resources | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Additional Funding & Financing Resources Additional Funding & Financing Resources Additional Funding & Financing Resources Workers use a giant crane to lift the blade assembly on a wind turbine at NREL's National Wind Technology Center. | Photo by Dennis Schroeder. Workers use a giant crane to lift the blade assembly on a wind turbine at NREL's National Wind Technology Center. | Photo by Dennis Schroeder. Want to know more about funding and financing for energy projects and businesses? Check out general resources at the Energy Department and other parts of the federal government. AT THE ENERGY DEPARTMENT DSIRE (Database of State Incentives for Renewables and Efficiency): DSIRE is the most comprehensive source of information on incentives and policies that support renewables and energy efficiency in the United States.

158

Estimating the Payback Period of Additional Insulation | Department of  

Broader source: Energy.gov (indexed) [DOE]

the Payback Period of Additional Insulation the Payback Period of Additional Insulation Estimating the Payback Period of Additional Insulation June 24, 2012 - 1:17pm Addthis Adding insulation in the attic of an existing home often results in a favorable payback. | Photo courtesy of Lieko Earle, NREL PIX 19612. Adding insulation in the attic of an existing home often results in a favorable payback. | Photo courtesy of Lieko Earle, NREL PIX 19612. What does this mean for me? Even if you hire a contractor to do the work, adding insulation to your home will likely have an attractive payback. If you can gather the information and plug it into an equation, you can determine the payback of adding insulation to your home. Use the equation below to estimate the cost effectiveness of adding insulation in terms of the "years to payback" for savings in heating costs.

159

Additional Resources for Estimating Building Energy and Cost Savings to  

Broader source: Energy.gov (indexed) [DOE]

Additional Resources for Estimating Building Energy and Cost Additional Resources for Estimating Building Energy and Cost Savings to Reduce Greenhouse Gases Additional Resources for Estimating Building Energy and Cost Savings to Reduce Greenhouse Gases October 7, 2013 - 11:06am Addthis For evaluating greenhouse gas reduction strategies and estimating costs, the following information resources can help Federal agencies estimate energy and cost savings potential by building type. When deciding what resource to use for developing energy- and cost-savings estimates, a program should consider items detailed in Table 1. Table 1.Resources for Estimating Energy Savings Resource Items to consider Advanced Energy Retrofit Guides Based on representative building models of commercial buildings. Guidance available for a limited number of building types using the most common technologies.

160

Estimating the Payback Period of Additional Insulation | Department of  

Broader source: Energy.gov (indexed) [DOE]

Estimating the Payback Period of Additional Insulation Estimating the Payback Period of Additional Insulation Estimating the Payback Period of Additional Insulation June 24, 2012 - 1:17pm Addthis Adding insulation in the attic of an existing home often results in a favorable payback. | Photo courtesy of Lieko Earle, NREL PIX 19612. Adding insulation in the attic of an existing home often results in a favorable payback. | Photo courtesy of Lieko Earle, NREL PIX 19612. What does this mean for me? Even if you hire a contractor to do the work, adding insulation to your home will likely have an attractive payback. If you can gather the information and plug it into an equation, you can determine the payback of adding insulation to your home. Use the equation below to estimate the cost effectiveness of adding insulation in terms of the "years to payback" for savings in heating costs.

Note: This page contains sample records for the topic "additional information purpose" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Additive manufacturing: technology, applications and research needs  

Science Journals Connector (OSTI)

Additive manufacturing (AM) technology has been researched and ... complexities that could not be produced by subtractive manufacturing processes. Through intensive research over the past...

Nannan Guo; Ming C. Leu

2013-09-01T23:59:59.000Z

162

A Management Strategy for Additive Manufacturing:.  

E-Print Network [OSTI]

??The thesis is about a Management Strategy for Additive Manufacturing - how engineering change influences the NPD process through the adoption of new manufacturing technology. (more)

Zahn, N.Z.

2014-01-01T23:59:59.000Z

163

Additive Manufacturing: Current Status and Future Prospects  

Science Journals Connector (OSTI)

The potential implications of additive manufacturing or 3D printing technology are being recognized across a number ... wider adoption of and greater business value from 3D printing.

Jyotirmoyee Bhattacharjya; Sonali Tripathi

2014-01-01T23:59:59.000Z

164

Characteristics and Effects of Lubricant Additive Chemistry...  

Broader source: Energy.gov (indexed) [DOE]

Characteristics and Effects of Lubricant Additive Chemistry and Exhaust Conditions on Diesel Particulate Filter Service Life and Vehicle Fuel Economy A Consortium to Optimize...

165

Novel Electrolytes and Additives | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

High Voltage Electrolyte for Lithium Batteries Vehicle Technologies Office Merit Review 2014: Fluorinated Electrolyte for 5-V Li-Ion Chemistry Novel Electrolytes and Additives...

166

,"Texas Natural Gas LNG Storage Additions (MMcf)"  

U.S. Energy Information Administration (EIA) Indexed Site

LNG Storage Additions (MMcf)" ,"Click worksheet name or tab at bottom for data" ,"Worksheet Name","Description"," Of Series","Frequency","Latest Data for" ,"Data 1","Texas Natural...

167

NREL: Dynamic Maps, Geographic Information System (GIS) Data and Analysis  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

October 2012 - End of Fiscal Year Addition October 2012 - End of Fiscal Year Addition The Geographic Information System (GIS) Team at the National Renewable Energy Laboratory (NREL) encompasses a broad range of scientific research and reporting activity in support of the U.S. Department of Energy's (DOE) Office of Energy Efficiency and Renewable Energy (EERE), NREL programs and initiatives, and the GIS community. The purpose of this end of FY newsletter is to highlight a few of the new tools and announce changes and addition of datasets that were finished by the end of our Fiscal year. You are receiving this message because you have subscribed to our mailing list. Featured Tools A screenshot of the Geothermal Analysis tool with a pie chart showing the surface ownership percentages and acerage of tribal lands in the United States.

168

Additive manufacturing of metallic tracks on  

E-Print Network [OSTI]

Additive manufacturing of metallic tracks on green ceramic/dielectrics Problem this technology (note: may require additional tooling/ set up time) · Rapid Prototyping & small scale manufacture microelectronics such as manufacture of LTCC ceramic/ Dielectric antenna and rapid PCB prototyping or repair

Painter, Kevin

169

TOPIC Brief BUILDING TECHNOLOGIES PROGRAM Additional Efficiency  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Additional Efficiency Additional Efficiency Package Options in the 2012 IECC Commercial Provisions TOPIC BRIEF 1 Additional Efficiency Package Options in the 2012 IECC Commercial Provisions Section C406, Additional Efficiency Package Options, is a new requirement that appears in the 2012 International Energy Conservation Code (IECC) commercial provisions. Section C406 provides three sets of provisions, one of which must be applied. T his section is intended to achieve additional energy efficiency in commercial buildings designed to meet the 2012 IECC while at the same time providing flexibility to the designer in terms of how that energy efficiency is achieved. Designers may choose to include more efficient HVAC equipment than required by the rest of the 2012 IECC, more

170

OSTI, US Dept of Energy, Office of Scientific and Technical Information |  

Office of Scientific and Technical Information (OSTI)

Tool Supports OSTI Mashups Tool Supports OSTI Mashups by Mary Schorn on Tue, 14 Jul, 2009 Did you know that science information is available via web "mashups"? Web "mashups" combine multiple products/services into a single application for the purpose of consolidating information with an easy-to-use interface. The Department of Energy (DOE) Office of Scientific and Technical Information (OSTI) uses "mashups" to return search results from Science Accelerator, Science.gov, and WorldWideScience.org. These "mashups" include external sources of information, in these cases from Wikipedia and EurekAlert!, that are provided as a service to the user for help with additional background information or with the ability to further study their topic. These "mashups" are made possible by OSTI's use of a federated search to

171

NREL photovoltaic subcontract reports: Abstracts and document control information, 1 August 1991--31 July 1992  

SciTech Connect (OSTI)

This report contains document control information and abstracts for the National Renewable Energy Laboratory (NREL) subcontracted photovoltaic program publications. It also lists source information on additional publications that describe US Department of Energy (DOE) PV research activities. It is not totally exhaustive, so it lists NREL contacts for requesting further information on the DOE and NREL PV programs. This report covers the period from August 1, 1991, through July 31, 1992. The purpose of continuing this type of publication is to help people keep abreast of specific PV interests, while maintaining a balance on the costs to the PV program. The information in this report is organized under PV technology areas: Amorphous silicon research; polycrystalline thin films (including copper indium diselenide, cadmium telluride, and thin-film silicon); crystalline materials and advanced concepts (including silicon, gallium arsenide, and other group III-V materials); and PV manufacturing technology development (which may include manufacturing information for various types of PV materials).

Not Available

1992-08-01T23:59:59.000Z

172

SRS ecology: Environmental information document  

SciTech Connect (OSTI)

The purpose of this Document is to provide a source of ecological information based on the exiting knowledge gained from research conducted at the Savannah River Site. This document provides a summary and synthesis of ecological research in the three main ecosystem types found at SRS and information on the threatened and endangered species residing there.

Wike, L.D.; Shipley, R.W.; Bowers, J.A. [and others

1993-09-01T23:59:59.000Z

173

4.6 MATLAB Laboratory Experiment Purpose: This experiment presents the frequency domain analysis of continuous-time  

E-Print Network [OSTI]

4.6 MATLAB Laboratory Experiment Purpose: This experiment presents the frequency domain analysis of continuous-time linear systems using MATLAB. The impulse, step, sinusoidal, and exponential responses. In addition, MATLAB will be used to perform the partial fraction expansion and to find the inverse Laplace

Gajic, Zoran

174

Compressed Gas Safety The purpose of this section is to assist the laboratory worker with identification, storage, maintenance,  

E-Print Network [OSTI]

Compressed Gas Safety The purpose of this section is to assist the laboratory worker. Labeling and Information-Compressed gas containers may be labeled in five ways: · Flammable Gas -- labels show a flame on red label. · Non-flammable Gas -- labels depict a gas canister on a green background

de Lijser, Peter

175

Additive Manufacturing : Changing the Rules of Manufacturing  

Science Journals Connector (OSTI)

Aspects of 3D printing and additive or layer manufacturing can be treated as modular manufacturing or modular components of manufacturing in the contemporary sense. Such modular manufacturing involves specialized...

2014-06-01T23:59:59.000Z

176

Integrated risk information system (IRIS)  

SciTech Connect (OSTI)

The Integrated Risk Information System (IRIS) is an electronic information system developed by the US Environmental Protection Agency (EPA) containing information related to health risk assessment. IRIS is the Agency`s primary vehicle for communication of chronic health hazard information that represents Agency consensus following comprehensive review by intra-Agency work groups. The original purpose for developing IRIS was to provide guidance to EPA personnel in making risk management decisions. This original purpose for developing IRIS was to guidance to EPA personnel in making risk management decisions. This role has expanded and evolved with wider access and use of the system. IRIS contains chemical-specific information in summary format for approximately 500 chemicals. IRIS is available to the general public on the National Library of Medicine`s Toxicology Data Network (TOXNET) and on diskettes through the National Technical Information Service (NTIS).

Tuxen, L. [Environmental Protection Agency, Washington, DC (United States)

1990-12-31T23:59:59.000Z

177

The Purpose and Process of the Sustainable Rangelands Roundtable  

E-Print Network [OSTI]

The Purpose and Process of the Sustainable Rangelands Roundtable E. T. BARTLETT, HELEN IVY ROWE and describing C&I of rangeland sustainability. The inclusive nature of the process should lead to wider Declaration and principles of sustainable forest management, which led to the creation of the Montreal Process

Wyoming, University of

178

An Optimal General Purpose Scheduler for Networked Control Systems  

E-Print Network [OSTI]

An Optimal General Purpose Scheduler for Networked Control Systems Ahmed Elmahdi , Ahmad F Taha to control the time delay is to im- prove the scheduling criterion. This paper proposes an optimal scheduling the stability of the control system. The proposed optimal schedul- ing protocol is a hybrid scheduling criterion

Sun, Dengfeng

179

Chemical Labeling Standard for Secondary Containers 1.0 PURPOSE  

E-Print Network [OSTI]

Chemical Labeling Standard for Secondary Containers 1.0 PURPOSE: 1.1 These guidelines their hands and lower arm areas after handling, mixing or transporting chemicals. 3.1.5 Exposure must specify the procedures endorsed by the UGA IACUC for the proper labeling of chemical solution secondary

Arnold, Jonathan

180

Modeling Fault Propagation in Telecommunications Networks for Diagnosis Purposes  

E-Print Network [OSTI]

Modeling Fault Propagation in Telecommunications Networks for Diagnosis Purposes A. Aghasaryan , C@lipn.univ-paris13.fr Abstract: This paper describes a formalism to model the behavior of telecommunications net. Keywords: network management, modeling, UML, distributed diagnosis. 1 Introduction Telecommunications

Pencolé, Yannick

Note: This page contains sample records for the topic "additional information purpose" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

2011 NONRESIDENT ALIEN (NRA) RENEWAL FOR TAX PURPOSE GUIDELINES  

E-Print Network [OSTI]

2011 NONRESIDENT ALIEN (NRA) RENEWAL FOR TAX PURPOSE GUIDELINES Non Resident Alien tax renewal is a required document for Non Resident Aliens without a valid social security number. Non Resident Aliens must with the employee's initials). There is no Tax Treaty exempting Non Resident Aliens from Maryland State Income Tax

Adali, Tulay

182

Purpose-designed Crop Plants for Biofuels BIOENERGY PROGRAM  

E-Print Network [OSTI]

Purpose-designed Crop Plants for Biofuels BIOENERGY PROGRAM The Texas AgriLife Research Center for the biofuels industry. This program recognizes that the ideal combination of traits required for an economically and energetically sustainable biofuels industry does not yet exist in a single plant spe- cies

183

Safeguarding Vulnerable Groups Policy Purpose of this Document  

E-Print Network [OSTI]

1 Safeguarding Vulnerable Groups Policy Purpose of this Document This document contains guidelines in university activities or visiting university premises. Author: Students in Classrooms & Safeguarding Children.0 Jamie Marshall January 2014 Added contents Amended e-safety Updated Safeguarding Officer Details Andy

Evans, Paul

184

RoboCon: A general purpose telerobotic control center  

SciTech Connect (OSTI)

This report describes human factors issues involved in the design of RoboCon, a multi-purpose control center for use in US Department of Energy remote handling applications. RoboCon is intended to be a flexible, modular control center capable of supporting a wide variety of robotic devices.

Draper, J.V.; Noakes, M.W. [Oak Ridge National Lab., TN (United States). Robotics and Process Systems Div.; Schempf, H. [Carnegie Mellon Univ., Pittsburgh, PA (United States); Blair, L.M. [Human Machine Interfaces, Inc., Knoxville, TN (United States)

1997-02-01T23:59:59.000Z

185

Neutron Scattering Society of America Purpose and New Initiatives  

E-Print Network [OSTI]

1 Neutron Scattering Society of America (NSSA) Purpose and New Initiatives www.neutronscattering.org SNS/ANL School on Neutron and X-Ray Scattering June 2011 Visit us now on Facebook #12;2 What and provide a focal point for the neutron scattering community in the USA To identify the needs

186

Neutron Scattering Society of America Purpose and New Initiatives  

E-Print Network [OSTI]

1 Neutron Scattering Society of America (NSSA) Purpose and New Initiatives www.neutronscattering.org SNS/ANL School on Neutron and X-Ray Scattering June 2010 Visit us now on Facebook #12;2 What and provide a focal point for the neutron scattering community in the USA To identify the needs

Pennycook, Steve

187

Risk Management Policy INTERNAL AUDIT Purpose of this document  

E-Print Network [OSTI]

types of risk are acceptable and which are not setting the standards and expectations of staffRisk Management Policy INTERNAL AUDIT SERVICE 1 Sept 2008 Purpose of this document 1. This risk. The policy explains the University's underlying approach to risk management, documents the roles

Banaji,. Murad

188

Multifunctional Diesel Fuel Additives from Triglycerides  

Science Journals Connector (OSTI)

Add to ACS ChemWorx ... A US1D test fuel (same as Table 3) was used with 10% ethanol added to lower the cetane number to additives was added to the low cetane fuel to evaluate the impact of the additive. ... In practice, decomposition exotherms for EHN and BK1P41 would both be lower than the DSC exotherms since heat removal capability and free radical?wall effects will impact decomposition temperatures. ...

G. J. Suppes; M. Goff; M. L. Burkhart; K. Bockwinkel; M. H. Mason; J. B. Botts; J. A. Heppert

2000-12-09T23:59:59.000Z

189

Information Cartography 1 Information Cartography  

E-Print Network [OSTI]

Information Cartography 1 Information Cartography · The use of Geographic Information Systems (GIS) to visualize non- geographic data · Utilizes Geographic Information Science to develop models and organize information--not an art form · Used to build information maps. Information maps consist of a landscape (base

Old, L. John

190

Title of the databases of legal information for use in social and humanitarian sciences  

Science Journals Connector (OSTI)

This article considers the legal information resources accessible over the Internet, as well as databases stored on optical media providing searchable legal information with various intended purposes. Features...

S. V. Bazarnova; S. O. Shevtsova

2007-02-01T23:59:59.000Z

191

Locking Information in Black Holes  

Science Journals Connector (OSTI)

We show that a central presumption in the debate over black-hole information loss is incorrect. Ensuring that information not escape during evaporation does not require that it all remain trapped until the final stage of the process. Using the recent quantum information-theoretic result of locking, we show that the amount of information that must remain can be very small, even as the amount already radiated is negligible. Information need not be additive: A small system can lock a large amount of information, making it inaccessible. Only if the set of initial states is restricted can information leak.

John A. Smolin and Jonathan Oppenheim

2006-02-28T23:59:59.000Z

192

A new DFM approach to combine machining and additive manufacturing  

E-Print Network [OSTI]

Design For Manufacturing (DFM) approaches aim to integrate manufacturability aspects during the design stage. Most of DFM approaches usually consider only one manufacturing process, but products competitiveness may be improved by designing hybrid modular products, in which products are seen as 3-D puzzles with modules realized aside by the best manufacturing process and further gathered. A new DFM system is created in order to give quantitative information during the product design stage of which modules will benefit in being machined and which ones will advantageously be realized by an additive process (such as Selective Laser Sintering or laser deposition). A methodology for a manufacturability evaluation in case of a subtractive or an additive manufacturing process is developed and implemented in a CAD software. Tests are carried out on industrial products from automotive industry.

Kerbrat, Olivier; Hascot, Jean-Yves; 10.1016/j.compind.2011.04.003

2011-01-01T23:59:59.000Z

193

BUILDINGS INVENTORY -CASUARINA CAMPUS Amendment: A July 2008 * Additions to Original List  

E-Print Network [OSTI]

BUILDINGS INVENTORY - CASUARINA CAMPUS Amendment: A July 2008 * Additions to Original List Precinct & Building Number Database Coding Former Building Number Description Drawing No Drawing Title Orange 1 OR1 29 General Purpose Building - Teaching & Administration BD OR1 - 01 to 04 Levels 1 to 4 PLANS * Orange 1A OR1

194

Stabilization of polyaniline solutions through additives  

DOE Patents [OSTI]

A stabilized non-conductive polyaniline solution comprising from about 1 to about 10 percent by weight polyaniline or a polyaniline derivative, from about 90 to about 99 percent by weight N-methylpyrrolidone, and from about 0.5 percent by weight to about 15 percent by weight of a solution stabilizing additive selected from the group consisting of hindered amine light stabilizers, polymeric amines, and dialkylamines, percent by weight of additive based on the total weight of polyaniline or polyaniline derivative is provided together with a method for stabilizing a polyaniline solution. 4 figs.

Wrobleski, D.A.; Benicewicz, B.C.

1996-12-10T23:59:59.000Z

195

Stabilization of polyaniline solutions through additives  

DOE Patents [OSTI]

A stabilized non-conductive polyaniline solution comprising from about 1 to bout 10 percent by weight polyaniline or a polyaniline derivative, from about 90 to about 99 percent by weight N-methylpyrrolidone, and from about 0.5 percent by weight to about 15 percent by weight of a solution stabilizing additive selected from the group consisting of hindered amine light stabilizers, polymeric amines, and dialkylamines, percent by weight of additive based on the total weight of polyaniline or polyaniline derivative is provided together with a method for stabilizing a polyaniline solution.

Wrobleski, Debra A. (Los Alamos, NM); Benicewicz, Brian C. (Los Alamos, NM)

1996-01-01T23:59:59.000Z

196

Pre-decisional - For Discussion Purposes Only Energy Efficiency...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Please contact the co-chairs for more information Meeting Notes 1 Attendees Co-chairs: Boyd Wilson, BPA Eugene Rosolie, Cowlitz PUD Christina Zamora Comm. Action Partnership Assn....

197

The General-Purpose Small-Angle Neutron Scattering Diffractometer at HFIR -  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

General-Purpose Small-Angle Neutron Scattering Diffractometer at HFIR General-Purpose Small-Angle Neutron Scattering Diffractometer at HFIR Instrument scientist Ken Littrell at GP-SANS. Instrument scientist Ken Littrell at GP-SANS. The General-Purpose Small-Angle Neutron Scattering Diffractometer (GP-SANS) instrument is optimized for providing information about structure and interactions in materials in the size range of 0.5 - 200 nm. It has a cold neutron flux on sample and capabilities comparable to those of the best SANS instruments worldwide, including a wide range of neutron wavelengths λ 5 - 30 Å, resolution Δλ ⁄ λ 9=45%, and a 1m2 area detector with 5 × 5mm2 pixel resolution with a maximum counting capability of up to 2.5 kHz. The sample-to-detector distance can be varied from 1 to 20 m, and the detector can be offset horizontally by up to 45 cm, allowing

198

Biofuels and the need for additional carbon  

Science Journals Connector (OSTI)

Use of biofuels does not reduce emissions from energy combustion but may offset emissions by increasing plant growth or by reducing plant residue or other non-energy emissions. To do so, biofuel production must generate and use 'additional carbon', which means carbon that plants would not otherwise absorb or that would be emitted to the atmosphere anyway. When biofuels cause no direct land use change, they use crops that would grow regardless of biofuels so they do not directly absorb additional carbon. All potential greenhouse gas reductions from such biofuels, as well as many potential emission increases, result from indirect effects, including reduced crop consumption, price-induced yield gains and land conversion. If lifecycle analyses ignore indirect effects of biofuels, they therefore cannot properly find greenhouse gas reductions. Uncertainties in estimating indirect emission reductions and increases are largely symmetrical. The failure to distinguish 'additional' carbon from carbon already absorbed or withheld from the atmosphere also leads to large overestimates of global bioenergy potential. Reasonable confidence in greenhouse gas reductions requires a precautionary approach to estimating indirect effects that does not rely on any single model. Reductions can be more directly assured, and other adverse indirect effects avoided, by focusing on biofuels from directly additional carbon.

Timothy D Searchinger

2010-01-01T23:59:59.000Z

199

Strategic Information Systems and Business Outcomes  

Science Journals Connector (OSTI)

This large-scale study of 1,990 responses from practitioners in a wide range of industries developed and tested a model of relationships among a specific type of strategic information system --strategic performance measurement systems SPMS --characteristics ... Keywords: Design Purposes, Financial and Non-Financial-Measures, Impact On Business Outcomes, Information Quality, Information Technology Use, Strategic Performance Measurement Systems SPMS, System Effectiveness

Alberto Bento, Regina Bento, Lourdes White, Ana Bento

2014-01-01T23:59:59.000Z

200

Classification of Nuclear Weapons-Related Information (Restricted Data and Formerly Restricted Data)  

Broader source: Energy.gov (indexed) [DOE]

CLASSIFICATION OF CLASSIFICATION OF NUCLEAR WEAPONS-RELATED INFORMATION Restricted Data and Formerly Restricted Data (RD and FRD) June 2012 2 3 Purpose To familiarize individuals from agencies outside of DOE who may come in contact with RD and FRD with the procedures for identifying, classifying, marking, handling, and declassifying documents containing that information as required by  The Atomic Energy Act and  10 Code of Federal Regulation (CFR) Part 1045, Nuclear Classification and Declassification §1045.35 4 Not the Purpose This briefing does not authorize you to classify or declassify documents containing RD or FRD. Additional training is required to classify documents containing RD or FRD or identify RD or FRD within a document for redaction. Only authorized DOE

Note: This page contains sample records for the topic "additional information purpose" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

RAPID/Geothermal/Land Access | Open Energy Information  

Open Energy Info (EERE)

certain exploration purposes without a lease with the approval of a Notice of Intent to Conduct Geothermal Resource Exploration Operations. In addition, the developer may require...

202

Request for Information Regarding a Proposed Funding Opportunity...  

Broader source: Energy.gov (indexed) [DOE]

1:05am Addthis The purpose of this Request for Information (RFI) is to solicit feedback from industry, academia, research laboratories, government agencies, and other stakeholders...

203

Request for Information Regarding a Proposed Funding Opportunity...  

Broader source: Energy.gov (indexed) [DOE]

2:00am Addthis The purpose of this Request for Information (RFI) is to solicit feedback from industry, academia, research laboratories, government agencies, and other stakeholders...

204

Contractor Past Performance Information  

Broader source: Energy.gov (indexed) [DOE]

December 2009) December 2009) 1 Contractor Performance Information Guiding Principles The primary purpose of past performance evaluations is to ensure that accurate data on contractor performance is current and available for use in source selections. A past performance evaluation report provides a record of a contractor's performance, both positive and negative, on a given contract during a specified period of time. The quality of the narrative component supporting the past performance information evaluation is critical. If the evaluator takes the time to prepare an accurate and complete report, the evaluator helps ensure better quality in the products and services DOE buys now and those DOE plans to buy in the future.

205

Energy & Financial Markets - U.S. Energy Information Administration...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

The lack of complete information on inventories creates additional uncertainty in oil markets, which can also influence oil prices. Finally, in addition to the commercial...

206

Draft Proposal for PDG Identifiers Purpose and Use Cases  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Proposal for PDG Identifiers Proposal for PDG Identifiers Purpose and Use Cases PDG Identif iers are strings that can be used to ref erence items in PDG such as rev iew articles, particles, datablocks or decay modes. Currently env isaged use cases include: External ref erences to items in the PDG database. For example, giv en a PDG Identif ier one can directly go to a specif ic page in pdgLiv e. Tags that can be included into the meta data of publication databases (in particular INSPIRE).

207

Cement Additives from Fly Ash Opportunity  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Device and Method for Separating Minerals, Carbon and Device and Method for Separating Minerals, Carbon and Cement Additives from Fly Ash Opportunity Research is currently active on the patented technology "Device and Method for Separating Minerals, Carbon, and Cement Additives from Fly Ash." The technology is available for licensing and/or further collaborative research from the U.S. Depart- ment of Energy's National Energy Technology Laboratory (NETL). Overview This invention includes a device, along with a method, to recover and use fly ash as a source of high purity carbon, ash, and minerals. The device and associated method can isolate components of the fly ash based on size and electrical charge. By improving beneficiation and usage methods, fly ash can be transformed from a waste material to a valuable by-product. Recent shifts to low nitrogen

208

The addition of disilanes to cumulenes  

SciTech Connect (OSTI)

The syntheses of silicon-containing compounds and the studies of their rearrangements have been active research areas in the Barton research group. Previously, the addition of disilanes to acetylenes was studied in the group and an intramolecular 2S + 2A mechanism has been proposed. In this thesis, the work is focused on the addition of disilanes to cumulenes. The syntheses of the precursors are discussed and the possible mechanisms for their thermal, photochemical and catalytic rearrangements are proposed. Conjugated organic polymers have been studied in the group since 1985 because of their potential for exhibiting high electroconductivity, photoconductivity, strong non-linear optical response and intense fluorescence. In the second section of this dissertation, the synthesis and property studies of poly(phenylene vinylene) analogues are discussed.

Chen, Y.

1997-10-08T23:59:59.000Z

209

Energetic additive manufacturing process with feed wire  

DOE Patents [OSTI]

A process for additive manufacture by energetic wire deposition is described. A source wire is fed into a energy beam generated melt-pool on a growth surface as the melt-pool moves over the growth surface. This process enables the rapid prototyping and manufacture of fully dense, near-net shape components, as well as cladding and welding processes. Alloys, graded materials, and other inhomogeneous materials can be grown using this process.

Harwell, Lane D. (Albuquerque, NM); Griffith, Michelle L. (Albuquerque, NM); Greene, Donald L. (Corrales, NM); Pressly, Gary A. (Sandia Park, NM)

2000-11-07T23:59:59.000Z

210

Regulators on additive higher Chow groups.  

E-Print Network [OSTI]

As an attempt to understand motives over $k[x]/(x^m)$, we define the cubical additive higher Chow groups with modulus for all dimensions extending the works of S. Bloch, H. Esnault and K. Rlling on 0-dimensional cycles. We give an explicit construction of regulator maps on the groups of 1-cycles with an aid of the residue theory of A. Parshin and V. Lomadze.

Jinhyun Park (Purdue University; West Lafayette; IN)

211

Chemical Additive Selection in Matrix Acidizing  

E-Print Network [OSTI]

critical detail of weak acid chemistry. One concern when using any acid in oilfield operations is the corrosion of well tubulars. Thus operators often choose to pump corrosion inhibitor, a chemical additive electrostatically attracted... in oilfield operations, each of which protects well tubulars using the same mechanism: by impeding the acid?s ability to diffuse to the tubing surface. Because of the unique attraction of corrosion inhibitor to the metal surface, and the corrosion inhibitor...

Weidner, Jason 1981-

2011-05-09T23:59:59.000Z

212

U.S. Department of Energy Energy Information Administration  

U.S. Energy Information Administration (EIA) Indexed Site

Department of Energy Department of Energy Energy Information Administration Form EIA-5 (July 2011) Quarterly Coal Consumption and Quality Report Coke Plants Page 1 Form Approved OMB No. 1905-0167 Expires: 06/30/2014 Burden: 1.50 Hours General Instructions: A. PURPOSE. The EIA-5 survey collects data related to coal receipts, stocks, and coke production at U.S. coke plants. The data are collected to provide Congress with basic statistics concerning coal consumption, stocks, prices, and quality as required by the Federal Energy Administration Act of 1974 (FEAA) (P.L. 93-275), as amended. These data appear in the Annual Coal Report, the Quarterly Coal Report, the Monthly Energy Review, and the Annual Energy Review. In addition, the Energy Information Administration uses the data for coal demand analyses and in short-term modeling efforts, which produce forecasts of coal demand

213

Information Science  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Information Science Information Science1354608000000Information ScienceSome of these resources are LANL-only and will require Remote Access.NoQuestions? 667-5809library@lanl.gov...

214

French Sizing of Medical Devices is not Fit for Purpose  

SciTech Connect (OSTI)

PurposeThe purpose of the study is to quantify the variation in the metric equivalent of French size in a range of medical devices, from various manufacturers, used in interventional radiology.MethodsThe labelling of a range of catheters, introducers, drains, balloons, stents, and endografts was examined. Products were chosen to achieve a broad range of French sizes from several manufacturers. To assess manufacturing accuracy, eight devices were selected for measurement using a laser micrometer. The external diameters of three specimens of each device were measured at centimeter intervals along the length of the device to ensure uniformity.ResultsA total of 200 labels of interventional radiology equipment were scrutinized. The results demonstrate a wide variation in the metric equivalent of French sizing. Labelled products can vary in diameter across the product range by up to 0.79 mm.The devices selected for measurement with the non-contact laser micrometer demonstrate acceptable manufacturing consistency. The external diameter differed by 0.05 mm on average.ConclusionsOur results demonstrate wide variation in the interpretation of the French scale by different manufacturers of medical devices. This has the potential to lead to problems using coaxial systems especially when the products are from different manufacturers. It is recommended that standard labelling should be employed by all manufacturers conveying specific details of the equipment. Given the wide variation in the interpretation of the French scale, our opinion is that this scale either needs to be abandoned or be strictly defined and followed.

Kibriya, Nabil, E-mail: nabskib@yahoo.co.uk; Hall, Rebecca; Powell, Steven [The Royal Liverpool University Hospital, Radiology Department (United Kingdom); How, Thien [University of Liverpool, Faculty of Health and Life Sciences (United Kingdom); McWilliams, Richard G. [The Royal Liverpool University Hospital, Radiology Department (United Kingdom)

2013-08-01T23:59:59.000Z

215

U.S. Department of Energy Form Approved: XX/XX/XXXX U.S. Energy Information Administration  

U.S. Energy Information Administration (EIA) Indexed Site

XX/XX/XXXX XX/XX/XXXX U.S. Energy Information Administration OMB No. XXXX-XXXX 1000 Independence Ave., S.W. Expiration Date: XX/XX/XXXX Washington, DC 20585 Burden: 6.0 hours PURPOSE REQUIRED RESPONDENTS * Entities importing power into the U.S. and exporting power out of the U.S. at wholesale. * Organizations that have U.S. treaty obligations involving the exchange of power between the U.S. and Canada or Mexico. DUE DATE HOW TO FILE A RESPONSE QUESTIONS For questions or additional information regarding the Form EIA-111, contact the Survey Manager: Name: Michelle Bowles

216

Additive-Driven Dissolution Enhancement of Colloidal Silica. 3. Fluorine-Containing Additives  

Science Journals Connector (OSTI)

Add to ACS ChemWorx ... Among the former are silica removal by ion-exchange methods(13) and utilization of scale inhibitors. ... Therefore, we would like to broaden the scope of the potential utilization of fluorine-containing additives with the objective that a broader choice of additive selection will be available to end-users. ...

Konstantinos D. Demadis; Maria Somara; Eleftheria Mavredaki

2012-01-20T23:59:59.000Z

217

RAPID/Roadmap/7-MT-a | Open Energy Information  

Open Energy Info (EERE)

monitoring purposes. The developer is also required to inform the DEQ before construction operations. MCA 75-20-216. The information required in the notice includes maps with the...

218

Additional Information for E-Area Vault Performance Assessment, Appendix I `Suspect Soil Performance` - Results of Modeling the Effects of Organic Matter on the Mobility of Radionuclides as it Relates to the Disposal of Wood Products in E-Area Slit Trenches  

SciTech Connect (OSTI)

Numerous laboratory and field studies have shown that the chemical form (i.e., speciation) of many metals and radionuclides is affected by the presence of naturally occurring organic matter (OM) and its degradation products. The effects of OM (e.g., wood products) on the speciation and, therefore, the mobility of Am, Bk, Cf, Cm, Cs, Ni, NpO{sub 2}, Rb, Sr. UO{sub 2}, and Zr were estimated through use of geochemical and groundwater flow modeling. Due to the complex mixture nature of naturally occurring OM, the OM system was simplified through use of surrogate compounds (citric acid and ethylenedinitrilotetraacetic acid (EDTA)) to estimate effects of OM on radionuclide mobility. Using this approach, OM was found to have no effect on the inventory limits for Cs, NpO{sub 2}, Rb and Zr. The inventory limits for the isotopes of Am, Bk, Cf, Cm, Ni, Pd, PuO{sub 2}, Sr, and UO{sub 2} calculated in the presence of OM decreased over a range of 26 percent for U-233 to 48 percent for Pu-240. The information in this report will be included in the next revision of the E-Area Vaults Performance Assessment.

Serkiz, S.M. [Westinghouse Savannah River Company, AIKEN, SC (United States); Myers, J.L.

1996-04-24T23:59:59.000Z

219

Chapter 1 - Introduction and Statement of Purpose and Need  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

1-1 1-1 CHAPTER 1 INTRODUCTION AND STATEMENT OF PURPOSE AND NEED The U.S. Department of Energy (DOE) is proposing to construct and operate an Actinide Chemistry and Repository Science Laboratory (ACRSL) to support chemical research activities related to the Waste Isolation Pilot Plant (WIPP) near Carlsbad, New Mexico. The laboratory would be located on New Mexico State University property adjacent to the existing Carlsbad Environmental Monitoring and Research Center (CEMRC) in Carlsbad, New Mexico. Figure 1-1 shows the locations of the CEMRC and WIPP sites and the community of Los Alamos within the state of New Mexico. DOE has prepared this environmental assessment (EA) to assess the potential environmental impacts associated with the proposed laboratory and reasonable alternatives. The EA was prepared pursuant to the National

220

U. S, Sovernment purposes. Introduction Quadrupole Magnet Measurements  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

he submitted manuscript has been authored he submitted manuscript has been authored by a contractor of the U. S. Government under· :;ontrae! No. W-31-109-ENG-38. Accordingly, the U. S. Government retains a nonexclusive, royalty·free license to publish or reproduce the published form of this c0ntribution, or allow others to do so, for U. S, Sovernment purposes. Introduction Quadrupole Magnet Measurements S.H.Kim lS- 166 This note describes a rotating coil probe of "radial-winding geometry· for the measurements of the magnetic center, quadrupole fields and multipole coefficients of quadrupole magnets. The active length of the coil is longer than the magnet length, so that all the measurements will be integrated values along the longitudinal direction of the magnets. Errors of the

Note: This page contains sample records for the topic "additional information purpose" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Guidance on purpose and need; letters between CEQ and DOT  

Broader source: Energy.gov (indexed) [DOE]

SECRETARY OF TRANSPORTATION SECRETARY OF TRANSPORTATION WASHINGTON, D.C. 20590 May 6, 2003 The Honorable James Connaughton Chairman, Council on Environmental Quality 722 Jackson Place, NW Washington, D.C. 20503 Dear Mr. Connaughton: As Chairman of the Interagency Transportation Infrastructure Streamlining Task Force established by Executive Order 13274, I am seeking your guidance on an important issue that has significant implications for our ability to carry out the President's mandate to promote environmental stewardship and streamline environmental reviews on the Nation's transportation infrastructure projects. As you are aware, under the National Environmental Policy Act of 1969 (NEPA), the "purpose and need" for a project is a critical element in the environmental review process. It explains the

222

The White House Office of Media Affairs For Planning Purposes  

Broader source: Energy.gov (indexed) [DOE]

Office of Media Affairs For Planning Purposes December 14, 2010 Environmental Leaders, Cabinet Secretaries to Participate in First White House Environmental Justice Forum WASHINGTON, D.C. - On December 15, Obama Administration officials will convene the first-ever White House Forum on Environmental Justice. Environmental leaders from across the country will attend the day-long forum featuring White House Council on Environmental Quality Chair Nancy Sutley, EPA Administrator Lisa P. Jackson, Attorney General Eric Holder, Secretary of the Interior Ken Salazar, Secretary of Labor Hilda Solis, Secretary of Health and Human Services Kathleen Sebelius, Secretary of Energy Steven Chu, and Secretary of Homeland Security Janet Napolitano. This Forum will focus on the Obama Administration's commitment to ensuring that

223

Codes and Standards Tech Team (CSTT) Purpose & Operation  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

FreedomCAR and Fuel Partnership FreedomCAR and Fuel Partnership Codes and Standards Tech Team (CSTT) Overview & Introduction CSTT Purpose & Operation C&S Roadmap & Fuel Purity Brad Smith, Shell Hydrogen - CSTT co-lead April 26, 2004 Members FreedomCAR and Fuel Partnership ChevronTexaco EXONMobil ConocoPhillips w/ National Labs Organization Executive Steering Group OEM & Energy R&D VPs DOE-EE Asst Sec Fuel Cell & Vehicle Tech Teams OEM Tech Experts DOE Tech Experts Fuel Operations Group Energy Directors DOE Program Managers Fuel Tech Teams Energy Tech Experts DOE Tech Experts FreedomCAR Operations Group OEM Directors DOE Program Managers Hydrogen Storage Tech Team OEM & Energy & DOE Tech Experts Codes & Standards Tech Team OEM & Energy & DOE

224

Freedom of Information Act  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

FOIA FOIA Freedom of Information Act (FOIA) If you would like additional information related to your request you should contact the FOIA Requester Service Center at this location. If you submitted your request to another component of the DOE, or if you submitted a request to this office and it has been transferred to a component of the Department to be processed, please contact the FOIA Requester Service Center at that location. You may access the telephone number to the appropriate FOIA Requester Service Center at http://energy.gov/management/office-management/operational-management/freedom-information-act/foia-contacts. Code of Federal Regulations (CFR) for the Freedom of Information Act is 10 CFR 1004 Freedom of Information Act of 1966 and Amendments (as of Jan. 2, 1991)

225

Purpose and goals The purpose of FEAT is to carry out the functional evaluation and testing required for upgrades to  

E-Print Network [OSTI]

LAT. 2 Integration refers to testing related to Campus Solutions integration and the control interface documentation · To keep eLAT and Change Control Coordinator informed of the functional testing results areas of the system or to `integration'2 . Responsibilities The FEAT Coordinator is responsible

Sidorov, Nikita

226

Information Technology Management ((Information Security))  

Broader source: Energy.gov [DOE]

A successful candidate in this position will serve as an Information Technology Specialist (Information Security) with responsibility for the implementation of a wide range of technically complex...

227

Probability in the Engineering and Informational Sciences  

E-Print Network [OSTI]

://journals.cambridge.org/PES Additional services for Probability in the Engineering and Informational Sciences: Email alerts: Click here Electric Power Service with Irreversible Early Notification. Probability in the EngineeringProbability in the Engineering and Informational Sciences http

Oren, Shmuel S.

228

INFORMATION & COMMUNICATION  

E-Print Network [OSTI]

of information and communication technologies in development that draws on Amartya Sen's capabilities approach

Jackson, Daniel

229

CONTACTS FOR INFORMATION MANAGEMENT: Forms, Information Collection...  

Broader source: Energy.gov (indexed) [DOE]

CONTACTS FOR INFORMATION MANAGEMENT: Forms, Information Collection (PRA), & Records CONTACTS FOR INFORMATION MANAGEMENT: Forms, Information Collection (PRA), & Records Name Contact...

230

A combinatorial framework for parametric additive manufacturing  

Science Journals Connector (OSTI)

The design of engineered artefacts is often a difficult and costly task. Thus, substantial technical efforts have been directed at developing methods to reuse design data sets by identifying, and exploiting, latent functional connections between data sets. Parametric design is based on the premise that an inventory existing designs can be used to create design templates such that the identified functional connections are coded by embedded parametric expressions. Novel variant designs may then be generated by assigning reasonable values to the parameters and then evaluating the resulting expressions in a carefully controlled manner. The potential of parametric engineering is clearly shown in the context of additive manufacturing. It will also be shown that parametric engineering models can be based directly on finitary combinatorial structures, specifically simplicial complexes. This paper will also propose that a suitable computational framework for this approach can be based upon a functional model of computation.

J.C. Boudreaux

2013-01-01T23:59:59.000Z

231

THERMAL TESTING OF PROTOTYPE GENERAL PURPOSE FISSILE PACKAGES USING A FURNACE  

SciTech Connect (OSTI)

The 9977/9978 General Purpose Fissile Package (GPFP) was designed by SRNL to replace the DOT 6M Specification Package and ship Plutonium and Uranium metals and oxides. Urethane foam was used for the overpack to ensure the package would withstand the 10CFR71.73(c)(2) crush test, which is a severe test for drum-type packages. In addition, it was necessary to confirm that the urethane foam configuration provided adequate thermal protection for the containment vessel during the subsequent 10CFR71.73(c)(4) thermal test. Development tests were performed on early prototype test specimens of different diameter overpacks and a range of urethane foam densities. The thermal test was performed using an industrial furnace. Test results were used to optimize the selection of package diameter and foam density, and provided the basis for design enhancements incorporated into the final package design.

Smith, A; Lawrence Gelder, L; Paul Blanton, P

2007-02-16T23:59:59.000Z

232

Combustion toxics: Available data and additional needs  

SciTech Connect (OSTI)

With the continuing expansion of air pollution regulations there is an increasing awareness of the potential need to assess the emissions and impact of trace compounds from combustion sources in refineries and chemical plants. It has been found that these trace compounds may be emitted as the result of incomplete fuel combustion, formation of new compounds during combustion, or the presence of inorganics (e.g., metals) in the fuel. Emission factors based on field data from these sources have recently been published by both the US Environmental Protection Agency (EPA) and the American Petroleum Institute (API). The emission factors indicate that a large number of trace compounds may be emitted from combustion sources including volatiles, semi-volatiles, PAHs, metals, and dioxins/furans. Some of these trace compounds have been classified as hazardous or toxic. A review of the EPA and API published data sets indicates that, while there is some overlap, many gaps exist in specific source and emission types. Where gaps exist, there is a lack of confirmation for the reported emission factor. Comparison of the EPA and API emission factors for gas and fuel oil fired boilers, however, indicates reasonable agreement for several metals and some PAHs where the data overlap. EPA, however, has sampled for many more metals than API and several EPA factors for PAHs are significantly higher than reported by API. Additionally tests may be warranted where there is insufficient overlap. Much additional work needs to be done to provide reliable factors which can be used to estimate trace toxic emissions from combustion. Many gaps and inconsistencies exist in the emission factors database and changes to existing factors are expected as the database is expanded.

Siegell, J.H.

2000-03-31T23:59:59.000Z

233

Data Assimilation and Dismantling Waste: A Methodology Customised for Radioactive Inventory Assessment Purposes  

SciTech Connect (OSTI)

Data assimilation is a versatile methodology which is widely used nowadays for estimating complex system variables. The estimation of a given quantity by data assimilation involves taking into account both the observational data and the underlying physical principles governing the system under observation. Let us consider two assumptions, (1) the observational information consists of radioactivity measurements of numerous samples of graphite (or other material) from known points and (2) the physical principles are those of activation under neutron flux during nuclear power plant operation. With these two assumptions, a data-assimilation-like methodology is ready to be applied to radioactive inventory computation for dismantling graphite (or other material). The paper is written for a planned graphite disposal project in France, for the purposes of its inventory forecasting. It introduces specific concepts for activation laws, presents the beginning of the application to Bugey 1 plant pile and proposes an original method for overall error quantification. (authors)

Poncet, B.R. [Electricite de France - CIDEN, 69 - Villeurbanne (France)

2008-07-01T23:59:59.000Z

234

Production and characterization of natural rubberCa/P blends for biomedical purposes  

Science Journals Connector (OSTI)

Abstract This study presents the development of natural rubberCa/P blends, as promising candidates for biomedical purposes. The specific objective was the incorporation of Ca/P into a natural rubber polymeric matrix. Ca/P crystalline phases were synthesized by the solgel method and the polymeric matrices were produced using natural rubber extracted from latex of the Hevea brasiliensis. The shape and size of natural rubber particles present in the NR membrane, as well as, the way the Ca/P powder grains aggregate in the polymeric matrix were investigated, giving information about the interactions between the Ca/P and the natural rubber particles. Confocal fluorescence scanning microscopy measurements allowed us to propose a structure where the Ca/P grains are surrounded by natural rubber particles. This structure may mediate Ca2+ release for tissue regeneration. The system investigated may open new horizons for development of a bandage which provides the controlled-release of biomaterials.

R.M. Nascimento; F.L. Faita; D.L.S. Agostini; A.E. Job; F.E.G. Guimares; I.H. Bechtold

2014-01-01T23:59:59.000Z

235

Isolation of alkylphenol additives from oil solutions by dialysis  

Science Journals Connector (OSTI)

The separation of alkylphenol additives from oil by the use of a ... (for an 8-h period), oil removal from alkylphenol additives is essentially complete. Depending on the nature of the additive, the additive loss...

Ya. M. Slobodin; T. G. Malysheva

1968-04-01T23:59:59.000Z

236

Dynamic modelling of MSF plants for automatic control and simulation purposes: a survey  

Science Journals Connector (OSTI)

The successful development of a control system requires an appropriate definition of the control structure (i.e., selection of output, input and disturbance variables) and an efficient dynamical model on which the design, analysis and evaluation can be carried out. Thus, the confidence in the obtained results depends on the validity of the control structure and of the model used. For multistage flash (MSF) desalination processes, several dynamical models can be found in the literature. However, most of them are not suitable for analysis and control design purposes because they bring too many variables into play. The variables, which are sharing in the control system, normally constitute a reduced subset of the total variables that can be defined in the process. Moreover, a dynamical model suitable for control is simpler than the model derived from the physics of the underlying process. Hence, the selection of variables and the model building from the point of view of control design presents a compromise between the indispensable information contained in the model and the mathematical complexity proper of the design. In this paper, different models from the literature are analysed. Their advantages and drawbacks are described taking into account simulation and automatic control purposes. Moreover, a set of wished modelling facilities from the control engineer point of view is highlighted. Finally, a block-oriented library for Matlab/Simulink is presented, so that different plant configurations can be implemented as block diagram to simulate the system and to test control algorithms.

Adrian Gambler; Essameddin Badreddin

2004-01-01T23:59:59.000Z

237

Microsoft Word - JC_ShuntCapacitorAddition_CX.doc  

Broader source: Energy.gov (indexed) [DOE]

April 21, 2010 April 21, 2010 REPLY TO ATTN OF: KEC-4 SUBJECT: Environmental Clearance Memorandum Amy M. Freel Project Manager - TEP-CSB-2 Proposed Action: Shunt Capacitor Addition at Jones Canyon Substation Budget Information: 00232732, Task 1 Categorical Exclusion Applied (from Subpart D, 10 C.F.R. Part 1021): B4.11 - Construction of electric power substations at 230-kV or modification of existing substations and support facilities. Location: Arlington, Gilliam County, Oregon Proposed by: Bonneville Power Administration (BPA) Description of the Proposed Action: BPA will expand its Jones Canyon Substation by 114,680 square feet (2.6 acres) beyond the existing substation area that exists within the fence- line of the substation property to install shunt capacitors. The new shunt capacitors will help

238

Chief Information Officer Chairman, Information  

E-Print Network [OSTI]

Chief Information Officer Chairman, Information Technology Division Cleveland Clinic C. Martin Harris, MD, MBA C. Martin Harris, M.D., M.B.A., is the Chief Information Officer and Chairman of the Information Technology Division of Cleveland Clinic in Cleveland, Ohio. Dr. Harris' interest and expertise

Loudon, Catherine

239

Freedom of Information Act Information  

E-Print Network [OSTI]

Freedom of Information Act 2000 Information Request Form Reference no of request Please read the guidance accompanying this form and refer to the University's Freedom of Information publication scheme (http://www.admin.cam.ac.uk/univ/information/foi/foi_publication_scheme.pdf) before making

Talbot, James P.

240

UC DAVIS -FEDERAL GRANT FINANCIAL REPORTING INFORMATION INFORMATION  

E-Print Network [OSTI]

UC DAVIS - FEDERAL GRANT FINANCIAL REPORTING INFORMATION GENERAL INFORMATION · The University is required by Federal sponsors to submit Financial Status Reports (FSRs) on all federal awards no later than.) o Extension of final budget period of a project period without additional Federal funds. o Change

Schladow, S. Geoffrey

Note: This page contains sample records for the topic "additional information purpose" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Building the Information Superhighway  

Office of Scientific and Technical Information (OSTI)

"Building the Information Superhighway" takes a look back at the history of the Internet, starting at a time when it had slowed to a crawl and the government was about to abandon the Internet as inherently flawed in concept. The article documents the contributions of the Department of Energy's Lawrence Berkeley National Laboratory in rescuing and then building today's Information Superhighway. Written in 1993, the article explores both the past and the future of the Internet. The people quoted in the article were visionary, seeing the road ahead with almost 20–20 vision. "Building the Information Superhighway" takes a look back at the history of the Internet, starting at a time when it had slowed to a crawl and the government was about to abandon the Internet as inherently flawed in concept. The article documents the contributions of the Department of Energy's Lawrence Berkeley National Laboratory in rescuing and then building today's Information Superhighway. Written in 1993, the article explores both the past and the future of the Internet. The people quoted in the article were visionary, seeing the road ahead with almost 20–20 vision. Building the Information Superhighway Summer 1993 By Jeffery Kahn, JBKahn@lbl.gov In 1989, LBL researcher Bill Johnston was called to Washington for a U.S. Senate hearing. Its purpose: to explore the potential of a national information superhighway.

242

Building the Information Superhighway  

Office of Scientific and Technical Information (OSTI)

"Building the Information Superhighway" takes a look back at the history of the Internet, starting at a time when it had slowed to a crawl and the government was about to abandon the Internet as inherently flawed in concept. The article documents the contributions of the Department of Energy's Lawrence Berkeley National Laboratory in rescuing and then building today's Information Superhighway. Written in 1993, the article explores both the past and the future of the Internet. The people quoted in the article were visionary, seeing the road ahead with almost 20–20 vision. "Building the Information Superhighway" takes a look back at the history of the Internet, starting at a time when it had slowed to a crawl and the government was about to abandon the Internet as inherently flawed in concept. The article documents the contributions of the Department of Energy's Lawrence Berkeley National Laboratory in rescuing and then building today's Information Superhighway. Written in 1993, the article explores both the past and the future of the Internet. The people quoted in the article were visionary, seeing the road ahead with almost 20–20 vision. Building the Information Superhighway Summer 1993 By Jeffery Kahn, JBKahn@lbl.gov In 1989, LBL researcher Bill Johnston was called to Washington for a U.S. Senate hearing. Its purpose: to explore the potential of a national information superhighway.

243

The purpose, status and future of fusion research  

Science Journals Connector (OSTI)

At present approximately 85% of energy consumption is met by burning fossil fuels. The world population is at present 5.5 billion. United Nations projections for 2060 give a median prediction of population doubling, a 'worst case' prediction of tripling and a 'best possible' 50% increase. Clearly the demand for energy is likely to increase by factors of 1.5 to 10 depending on the actual population growth and the achieved improvements, if any, in the mean standard of living. Fossil fuels are a finite resource and estimated reserves correspond at present energy consumption rates to approximately 50 years for oil and gas and several hundred years for coal. The only major alternatives to fossil fuels are solar, fission and fusion power. These are all at different states of development and have very different environmental effects and perceived safety aspects. Given the magnitude of the long-term energy problem it is clearly important to aim at diversity of supply and to develop each system to its full potential. The purpose of fusion research is therefore to explore the related science and technology and to develop prototype power-generation systems.

R J Bickerton

1993-01-01T23:59:59.000Z

244

Information theory and energy spectra  

Science Journals Connector (OSTI)

We examine the possibility of inferring energy spectra and their concomitant eigenstates on the basis of incomplete information concerning the systems ground state. In addition, the possibility of considering, as prior information, the expectation values of a partially unknown Hamiltonian also is examined and shown to be feasible.

N. Canosa; R. Rossignoli; A. Plastino

1991-02-01T23:59:59.000Z

245

CLOSED CIRCUIT TELEVISION MONITORING AND RECORDING OF PUBLIC AREAS FOR SAFETY AND SECURITY PURPOSES  

E-Print Network [OSTI]

security plan using stateoftheart technology is closed circuit television (CCTV). B. The purpose of CCTV

Fang-Yen, Christopher

246

Information Accountability  

E-Print Network [OSTI]

Ease of information flow is both the boon and the bane of large-scale, decentralized systems like the World Wide Web. For all the benefits and opportunities brought by the information revolution, with that same revolution ...

Weitzner, Daniel J.

2007-06-13T23:59:59.000Z

247

A novel methodology of design for Additive Manufacturing applied to Additive Laser Manufacturing process  

Science Journals Connector (OSTI)

Abstract Nowadays, due to rapid prototyping processes improvements, a functional metal part can be built directly by Additive Manufacturing. It is now accepted that these new processes can increase productivity while enabling a mass and cost reduction and an increase of the parts functionality. However, the physical phenomena that occur during these processes have a strong impact on the quality of the produced parts. Especially, because the manufacturing paths used to produce the parts lead these physical phenomena, it is essential to considerate them right from the parts design stage. In this context, a new numerical chain based on a new design for Additive Manufacturing (DFAM) methodology is proposed in this paper, the new DFAM methodology being detailed; both design requirements and manufacturing specificities are taken into account. The corresponding numerical tools are detailed in the particular case of thin-walled metal parts manufactured by an Additive Laser Manufacturing (ALM) process.

Remi Ponche; Olivier Kerbrat; Pascal Mognol; Jean-Yves Hascoet

2014-01-01T23:59:59.000Z

248

Evaluation of Five Sedimentary Rocks Other Than Salt for Geologic Repository Siting Purposes  

SciTech Connect (OSTI)

The US Department of Energy (DOE), in order to increase the diversity of rock types under consideration by the geologic disposal program, initiated the Sedimary ROck Program (SERP), whose immediate objectiv eis to evaluate five types of secimdnary rock - sandstone, chalk, carbonate rocks (limestone and dolostone), anhydrock, and shale - to determine the potential for siting a geologic repository. The evaluation of these five rock types, together with the ongoing salt studies, effectively results in the consideration of all types of relatively impermeable sedimentary rock for repository purposes. The results of this evaluation are expressed in terms of a ranking of the five rock types with respect to their potential to serve as a geologic repository host rock. This comparative evaluation was conducted on a non-site-specific basis, by use of generic information together with rock evaluation criteria (RECs) derived from the DOE siting guidelines for geologic repositories (CFR 1984). An information base relevant to rock evaluation using these RECs was developed in hydrology, geochemistry, rock characteristics (rock occurrences, thermal response, rock mechanics), natural resources, and rock dissolution. Evaluation against postclosure and preclosure RECs yielded a ranking of the five subject rocks with respect to their potential as repository host rocks. Shale was determined to be the most preferred of the five rock types, with sandstone a distant second, the carbonate rocks and anhydrock a more distant third, and chalk a relatively close fourth.

Croff, A.G.; Lomenick, T.F.; Lowrie, R.S.; Stow, S.H.

2003-11-15T23:59:59.000Z

249

Exploratory Boreholes | Open Energy Information  

Open Energy Info (EERE)

Exploratory Boreholes Exploratory Boreholes Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Technique: Exploratory Boreholes Details Activities (0) Areas (0) Regions (0) NEPA(0) Exploration Technique Information Exploration Group: Drilling Techniques Exploration Sub Group: Exploration Drilling Parent Exploration Technique: Exploration Drilling Information Provided by Technique Lithology: Can provide core or cuttings Stratigraphic/Structural: Identify stratigraphy and structural features within a borehole Hydrological: -Water samples can be used for geochemical analysis -Fluid pressures can be used to estimate flow rates Thermal: -Temperatures can be measured within the hole -Information about the heat source Dictionary.png Exploratory Boreholes: An exploratory borehole is drilled for the purpose of identifying the

250

Exploratory Well | Open Energy Information  

Open Energy Info (EERE)

Exploratory Well Exploratory Well Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Technique: Exploratory Well Details Activities (8) Areas (3) Regions (0) NEPA(5) Exploration Technique Information Exploration Group: Drilling Techniques Exploration Sub Group: Exploration Drilling Parent Exploration Technique: Exploration Drilling Information Provided by Technique Lithology: Can provide core or cuttings Stratigraphic/Structural: Identify stratigraphy and structural features within a well Hydrological: -Water samples can be used for geochemical analysis -Fluid pressures can be used to estimate flow rates Thermal: -Temperatures can be measured within the hole -Information about the heat source Dictionary.png Exploratory Well: An exploratory well is drilled for the purpose of identifying the

251

Project Records Information System (PRIS)  

SciTech Connect (OSTI)

The Project Records Information System (PRIS) is an interactive system developed for the Information Services Division (ISD) of Martin Marietta Energy Systems, Inc., to perform indexing, maintenance, and retrieval of information about Engineering project record documents for which they are responsible. This PRIS User's Manual provides instruction on the use of this system. This manual presents an overview of PRIS, describing the system's purpose; the data that it handles; functions it performs; hardware, software, and access; and help and error functions. This manual describes the interactive menu-driven operation of PRIS. Appendixes A, B, C, and D contain the data dictionary, help screens, report descriptions, and a primary menu structure diagram, respectively.

Smith, P.S.; Schwarz, R.K.

1990-11-01T23:59:59.000Z

252

Data Techniques | Open Energy Information  

Open Energy Info (EERE)

Techniques Techniques Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Technique: Data Techniques Details Activities (0) Areas (0) Regions (0) NEPA(0) Exploration Technique Information Exploration Group: Data and Modeling Techniques Exploration Sub Group: Data Techniques Parent Exploration Technique: Data and Modeling Techniques Information Provided by Technique Lithology: Stratigraphic/Structural: Hydrological: Thermal: Dictionary.png Data Techniques: The collection, processing, and interpretation of data from various methods so accurate interpretations can be made about the subject matter. Other definitions:Wikipedia Reegle Introduction Data techniques are any technique where data is collected and organized in a manner so that the information is useful for geothermal purposes. The

253

Concentrating Information  

E-Print Network [OSTI]

We introduce the concentrated information of tripartite quantum states. For three parties Alice, Bob and Charlie, it is defined as the maximal mutual information achievable between Alice and Charlie via local operations and classical communication performed by Charlie and Bob. The gap between classical and quantum concentrated information is shown to be an operational figure of merit for a state merging protocol involving shared mixed states and no distributed entanglement. We derive upper and lower bounds on the concentrated information, and obtain a closed expression for arbitrary pure tripartite states in the asymptotic setting. In this situation, one-way classical communication is shown to be sufficient for optimal information concentration.

Alexander Streltsov; Soojoon Lee; Gerardo Adesso

2014-10-23T23:59:59.000Z

254

Additions, Alterations, and Repairs Introduction Page 8-1 8 Additions, Alterations, and Repairs  

E-Print Network [OSTI]

to a building's envelope, space-conditioning system, water-heating system or lighting system) to an existing building. If the skylight has a light well that cuts through an existing attic, the alteration. Adding a new greenhouse window to an existing building. This is an alteration rather than an addition

255

Information Handling: Keeping Chemists Informed  

Science Journals Connector (OSTI)

... be a member from the start, and the Office for Scientific and Technical Information (OSTI) will be represented by an observer. The objective is to provide a comprehensive information ...

1968-09-28T23:59:59.000Z

256

Energy information directory 1997  

SciTech Connect (OSTI)

The National Energy Information Center (NEIC), as part of its mission, provides energy information and referral assistance to Federal, state, and local governments, the academic community, business and industrial organizations, and the general public. The two principal functions related to this task are: (1) operating a general access telephone line, and (2) responding to energy-related correspondence addressed to the Energy Information Administration (EIA). The Energy Information Directory was developed to assist the NEIC staff, as well as other Department of Energy (DOE) staff, in directing inquiries to the proper offices within DOE, other Federal agencies, or energy-related trade associations. The Directory lists some of the Government offices and trade associations that are involved in energy matters. It includes those DOE offices which deal with the public or public information. For the purposes of this publication, each entry has been given a numeric identification symbol. The index found in the back of this publication uses these identification numbers to refer the reader to relevant entries.

NONE

1997-09-01T23:59:59.000Z

257

Chemical Shuttle Additives in Lithium Ion Batteries  

SciTech Connect (OSTI)

The goals of this program were to discover and implement a redox shuttle that is compatible with large format lithium ion cells utilizing LiNi{sub 1/3}Mn{sub 1/3}Co{sub 1/3}O{sub 2} (NMC) cathode material and to understand the mechanism of redox shuttle action. Many redox shuttles, both commercially available and experimental, were tested and much fundamental information regarding the mechanism of redox shuttle action was discovered. In particular, studies surrounding the mechanism of the reduction of the oxidized redox shuttle at the carbon anode surface were particularly revealing. The initial redox shuttle candidate, namely 2-(pentafluorophenyl)-tetrafluoro-1,3,2-benzodioxaborole (BDB) supplied by Argonne National Laboratory (ANL, Lemont, Illinois), did not effectively protect cells containing NMC cathodes from overcharge. The ANL-RS2 redox shuttle molecule, namely 1,4-bis(2-methoxyethoxy)-2,5-di-tert-butyl-benzene, which is a derivative of the commercially successful redox shuttle 2,5-di-tert-butyl-1,4-dimethoxybenzene (DDB, 3M, St. Paul, Minnesota), is an effective redox shuttle for cells employing LiFePO{sub 4} (LFP) cathode material. The main advantage of ANL-RS2 over DDB is its larger solubility in electrolyte; however, ANL-RS2 is not as stable as DDB. This shuttle also may be effectively used to rebalance cells in strings that utilize LFP cathodes. The shuttle is compatible with both LTO and graphite anode materials although the cell with graphite degrades faster than the cell with LTO, possibly because of a reaction with the SEI layer. The degradation products of redox shuttle ANL-RS2 were positively identified. Commercially available redox shuttles Li{sub 2}B{sub 12}F{sub 12} (Air Products, Allentown, Pennsylvania and Showa Denko, Japan) and DDB were evaluated and were found to be stable and effective redox shuttles at low C-rates. The Li{sub 2}B{sub 12}F{sub 12} is suitable for lithium ion cells utilizing a high voltage cathode (potential that is higher than NMC) and the DDB is useful for lithium ion cells with LFP cathodes (potential that is lower than NMC). A 4.5 V class redox shuttle provided by Argonne National Laboratory was evaluated which provides a few cycles of overcharge protection for lithium ion cells containing NMC cathodes but it is not stable enough for consideration. Thus, a redox shuttle with an appropriate redox potential and sufficient chemical and electrochemical stability for commercial use in larger format lithium ion cells with NMC cathodes was not found. Molecular imprinting of the redox shuttle molecule during solid electrolyte interphase (SEI) layer formation likely contributes to the successful reduction of oxidized redox shuttle species at carbon anodes. This helps to understand how a carbon anode covered with an SEI layer, that is supposed to be electrically insulating, can reduce the oxidized form of a redox shuttle.

Patterson, Mary

2013-03-31T23:59:59.000Z

258

ContactInformation Contact Information  

E-Print Network [OSTI]

's only fully accredited institute of higher learning offering graduate education in the field of Steel Institute of Ferrous Technology(GIFT) Admissions Timeline Semester Begins Application Deadline September 1ContactInformation Contact Information For More Information We look forward to receiving your

Sung, Wokyung

259

,"Alaska Natural Gas LNG Storage Additions (MMcf)"  

U.S. Energy Information Administration (EIA) Indexed Site

LNG Storage Additions (MMcf)" LNG Storage Additions (MMcf)" ,"Click worksheet name or tab at bottom for data" ,"Worksheet Name","Description","# Of Series","Frequency","Latest Data for" ,"Data 1","Alaska Natural Gas LNG Storage Additions (MMcf)",1,"Annual",2012 ,"Release Date:","12/12/2013" ,"Next Release Date:","1/7/2014" ,"Excel File Name:","na1330_sak_2a.xls" ,"Available from Web Page:","http://tonto.eia.gov/dnav/ng/hist/na1330_sak_2a.htm" ,"Source:","Energy Information Administration" ,"For Help, Contact:","infoctr@eia.doe.gov" ,,"(202) 586-8800",,,"12/12/2013 5:42:06 PM"

260

,"South Carolina Natural Gas LNG Storage Additions (MMcf)"  

U.S. Energy Information Administration (EIA) Indexed Site

Additions (MMcf)" Additions (MMcf)" ,"Click worksheet name or tab at bottom for data" ,"Worksheet Name","Description","# Of Series","Frequency","Latest Data for" ,"Data 1","South Carolina Natural Gas LNG Storage Additions (MMcf)",1,"Annual",2012 ,"Release Date:","12/12/2013" ,"Next Release Date:","1/7/2014" ,"Excel File Name:","na1330_ssc_2a.xls" ,"Available from Web Page:","http://tonto.eia.gov/dnav/ng/hist/na1330_ssc_2a.htm" ,"Source:","Energy Information Administration" ,"For Help, Contact:","infoctr@eia.doe.gov" ,,"(202) 586-8800",,,"12/12/2013 5:42:13 PM"

Note: This page contains sample records for the topic "additional information purpose" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

,"South Dakota Natural Gas LNG Storage Additions (MMcf)"  

U.S. Energy Information Administration (EIA) Indexed Site

LNG Storage Additions (MMcf)" LNG Storage Additions (MMcf)" ,"Click worksheet name or tab at bottom for data" ,"Worksheet Name","Description","# Of Series","Frequency","Latest Data for" ,"Data 1","South Dakota Natural Gas LNG Storage Additions (MMcf)",1,"Annual",2012 ,"Release Date:","12/12/2013" ,"Next Release Date:","1/7/2014" ,"Excel File Name:","na1330_ssd_2a.xls" ,"Available from Web Page:","http://tonto.eia.gov/dnav/ng/hist/na1330_ssd_2a.htm" ,"Source:","Energy Information Administration" ,"For Help, Contact:","infoctr@eia.doe.gov" ,,"(202) 586-8800",,,"12/12/2013 5:42:13 PM"

262

Derivative Formation in the Chromatographic Analysis of Food Additives  

Science Journals Connector (OSTI)

......formed by the addition of bromine...more recent demonstration of the carcinogenicity...acetate. An ion-exchange clean-up...Trimethylsilylation. In addition to acylation...and guaiac resin in food extracts...before. In addition, the more......

H.B.S. Conacher; B.D. Page

1979-04-01T23:59:59.000Z

263

Removal of phenanthrene from soil by additive-enhanced electrokinetics  

Science Journals Connector (OSTI)

Removal of hydrophobic organic contaminants (HOCs) using an additive-enhanced electrokinetic method was studied in a ... (EK) column experiments were performed using these additives. When no additive was used, a

Ji-Yeon Park; Yan Chen; Jian Chen; Ji-Won Yang

2002-03-01T23:59:59.000Z

264

A new additive manufacturing process based on friction deposition  

Science Journals Connector (OSTI)

Additive manufacturing involves layer-by-layer fabrication of three- ... The current study demonstrates a novel concept for additive manufacturing, in which material addition is achieved in ... the proposed appro...

J. John Samuel Dilip; H. Kalid Rafi

2011-02-01T23:59:59.000Z

265

Influence of boric acid additive size on green lubricant performance  

Science Journals Connector (OSTI)

...towards green manufacturing processes, there...boric acid powder additives with canola oil...change present manufacturing process lines...powder-based lubricant additives As conceptually...of boric acid additive size on green...towards green manufacturing processes, there...

2010-01-01T23:59:59.000Z

266

MECH 502: Advanced/Additive Manufacturing Engineering COURSE DESCRIPTION  

E-Print Network [OSTI]

MECH 502: Advanced/Additive Manufacturing Engineering COURSE DESCRIPTION In this course you product development and innovation. You will develop a rich knowledge of additive manufacturing processes enabling advanced/additive manufacturing and personal fabrication. You will have the opportunity

Schumacher, Russ

267

The Purpose and Value of Successful Technology Demonstrations … The Energy Independence and Security Act of 2007 Demonstrations  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Purpose and Value of Successful Technology Demonstrations - The Energy Purpose and Value of Successful Technology Demonstrations - The Energy Independence and Security Act of 2007 Demonstrations by Steve Bossart, NETL Senior Management and Technical Advisor, and Steve Pullins, Team Leader, DOE/NETL Modern Grid Strategy Our industry has piloted many, many technologies, but truly deployed few. Can we say that we completely understand the value of a single technology piloted in a couple different utilities? Or, must we integrate this technology with other technologies in a real-world environment to discover those additional values and benefits that go beyond its solo application? When we survey the industry for technology penetration, we find a sad picture....many solo pilots, but little evidence of integrated advanced technologies. The reasons are simple and clear.

268

E-Print Network 3.0 - additional experimental information Sample...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

M.V. Zelkowitz, D. ... Source: Zelkowitz, Marvin V. - Fraunhofer Center for Experimental Software Engineering & Department of Computer Science, University of Maryland at College...

269

Additives and Cathode Materials for High-Energy Lithium Sulfur...  

Broader source: Energy.gov (indexed) [DOE]

Additives and Cathode Materials for High-Energy Lithium Sulfur Batteries Additives and Cathode Materials for High-Energy Lithium Sulfur Batteries 2013 DOE Hydrogen and Fuel Cells...

270

Surface and Structural Stabilities of Carbon Additives in High...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Structural Stabilities of Carbon Additives in High Voltage Lithium Ion Batteries. Surface and Structural Stabilities of Carbon Additives in High Voltage Lithium Ion Batteries....

271

Energy Department Authorizes Additional Volume at Proposed Freeport...  

Office of Environmental Management (EM)

Additional Volume at Proposed Freeport LNG Facility to Export Liquefied Natural Gas Energy Department Authorizes Additional Volume at Proposed Freeport LNG Facility to Export...

272

Webinar: Additive Manufacturing for Fuel Cells | Department of...  

Broader source: Energy.gov (indexed) [DOE]

Additive Manufacturing for Fuel Cells Webinar: Additive Manufacturing for Fuel Cells February 11, 2014 5:00PM to 6:00PM EST Online...

273

The Role of Lubricant Additives in Fuel Efficiency and Emission...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Lubricant Additives in Fuel Efficiency and Emission Reductions: Viscosity Effects The Role of Lubricant Additives in Fuel Efficiency and Emission Reductions: Viscosity Effects...

274

Energy Department Seeks Additional Feedback on Draft Guidance...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Additional Feedback on Draft Guidance for the Hydroelectric Production Incentive Program Energy Department Seeks Additional Feedback on Draft Guidance for the Hydroelectric...

275

Fuel Additive Strategies for Enhancing the Performance of Engines...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Additive Strategies for Enhancing the Performance of Engines and Engine Oils Fuel Additive Strategies for Enhancing the Performance of Engines and Engine Oils 2003 DEER Conference...

276

Ionic Liquids as Novel Engine Lubricants or Lubricant Additives...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Additives Ionic Liquids as Novel Engine Lubricants or Lubricant Additives Bench test results showed that compared with fully-formulated engine oils, selected low-viscosity...

277

NANOPARTICLE ADDITIVES FOR MULTIPHASE SYSTEMS: SYNTHESIS, FORMULATION AND CHARACTERIZATION.  

E-Print Network [OSTI]

??Study on nanoparticle additives in multiphase systems (liquid, polymer) are of immense interest in developing new product applications. Critical challenges for nanoparticle additives include their (more)

Kanniah, Vinod

2012-01-01T23:59:59.000Z

278

Unlocking the Potential of Additive Manufacturing in the Fuel...  

Broader source: Energy.gov (indexed) [DOE]

Unlocking the Potential of Additive Manufacturing in the Fuel Cells Industry Unlocking the Potential of Additive Manufacturing in the Fuel Cells Industry PDF includes slides from...

279

Upcoming Webinar February 11: Additive Manufacturing for Fuel...  

Broader source: Energy.gov (indexed) [DOE]

February 11: Additive Manufacturing for Fuel Cells Upcoming Webinar February 11: Additive Manufacturing for Fuel Cells February 6, 2014 - 12:00am Addthis On Tuesday, February 11,...

280

Obama Administration Announces Additional $37,359,500 for Local...  

Office of Environmental Management (EM)

Announces Additional 37,359,500 for Local Energy Efficiency Improvements in Minnesota Obama Administration Announces Additional 37,359,500 for Local Energy Efficiency...

Note: This page contains sample records for the topic "additional information purpose" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Department of Energy Announces Two Additional Loans of Oil from...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Additional Loans of Oil from the Strategic Petroleum Reserve Department of Energy Announces Two Additional Loans of Oil from the Strategic Petroleum Reserve September 2, 2005 -...

282

Full-Time, Non-Tenure-Track, Non-Clinical Faculty Appointments The purpose of this document is to bring to your attention the policies and practices  

E-Print Network [OSTI]

Full-Time, Non-Tenure-Track, Non-Clinical Faculty Appointments The purpose of this document is to bring to your attention the policies and practices governing full-time, Non-tenure-track, Non-time annual contracts for an unlimited number of years. In addition, initial appointments of non- tenure-track

283

E-Print Network 3.0 - additives alternative additiver Sample...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Information Sciences 13 1.0 1.5 2.0 2.5 3.0 3.5 kCounts RIC all trae4.ms Summary: . Flash pyrolysis of additivated biomass The effect of the additives are not significant for the...

284

Quantum capacity of lossy channel with additive classical Gaussian noise : a perturbation approach  

E-Print Network [OSTI]

For a quantum channel of additive Gaussian noise with loss, in the general case of $n$ copies input, we show that up to first order perturbation, any non-Gaussian perturbation to the product thermal state input has a less quantum information transmission rate when the input energy tend to infinitive.

Xiao-yu Chen

2007-10-02T23:59:59.000Z

285

Purpose of the Form All non-US Citizens are required to complete the Form UPP-192, Alien Determination of Residency. The UPP-  

E-Print Network [OSTI]

Purpose of the Form All non-US Citizens are required to complete the Form UPP-192, Alien Alien Status Indicate your current alien status. If you are currently working/receiving payment from UPP-192 ­ ALIEN DETERMINATION OF RESIDENCY INSTRUCTIONS #12;Section III ­ Immigration Information Days

He, Chuan

286

information Conference  

Science Journals Connector (OSTI)

information Conference ... The 1958 International Conference on Scientific Information will be held in Washington, D. C, in November 1958. ... Since papers that are accepted must be printed and circulated to the participants not later than July 1958, it is urged that anyone interested in submitting a paper write to the secretariat immediately, at International Conference of Scientific Information, National Academy of Sciences, 2101 Constitution Ave., Washington 25, D. C. ...

1957-12-09T23:59:59.000Z

287

Technical information  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

Home> Commercial Buildings Home> Technical Information > Estimation of Standard Errors Estimation of Standard Errors Sampling error is the difference between the survey estimate...

288

Vendor Information  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Vendors businessassetsimagesbusiness-icon.jpg Vendor Information As a premier national research and development laboratory, LANL seeks to do business with qualified companies...

289

Operations Information  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Standards BPA Operations Information (OPI) Transmission Services operates and plans for regional and national system needs. Transmission Services coordinates system operation and...

290

Ordering Information  

Gasoline and Diesel Fuel Update (EIA)

Federal, State, local, and foreign governments, EIA survey respondents, and the media. For further information, and for answers to questions on energy statistics, please...

291

Part B - Requirements & Funding Information  

Broader source: Energy.gov (indexed) [DOE]

B - Requirements & Funding Information B - Requirements & Funding Information PART B - Requirements & Funding Information .......................................................................................... 2 PART B - Requirements & Funding Information B.1. Purpose This Part of the IA (hereinafter 'Part B') serves as the funding document. It provides specific information on the requirements of the Department of Energy, hereinafter 'the Requesting Agency' sufficient to demonstrate a bona fide need and identifies funds associated with the requirement to allow [insert the name of agency/organization that will provide acquisition services for the Department of Energy], hereinafter 'the Servicing Agency,' to provide acquisition assistance and conduct an interagency acquisition.

292

California Solar Initiative (CSI) Thermal Program Metering Installation Guide Purpose: The purpose of this metering installation guide is to provide participating eligible contractors  

E-Print Network [OSTI]

1 California Solar Initiative (CSI) Thermal Program Metering Installation Guide Purpose: The purpose of this metering installation guide is to provide participating eligible contractors in the CSI-Thermal to the mixing valve. Place the hot sensor on the pipe between the solar tank and the backup water heater. #12

293

Additional GIS Registration for Non-U.S. Citizens | 2014 International  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Brookhaven National Laboratory Brookhaven National Laboratory 2014 International Workshop on FFAG Accelerators (FFAG'14) Homepage Registration Talks Agenda Contact Us Workshop Information pulldown Accommodations Transportation to BNL Attendee Information Add Event to Calendar Access to BNL Directions to Event Food at BNL Local Weather at BNL Visiting BNL Nearby Attractions Disclaimer 2014 International Workshop on FFAG Accelerators BNL Guest Registration Important Notice: Non-U.S. Citizens must complete the additional BNL Guest Registration form by August 25, 2014 and be approved in the BNL Guest Information System (GIS) before they will be granted access to the laboratory. All guests planning to use on-site accommodations must also complete an additional BNL Guest Registration form and be approved in GIS.

294

MOTIVATION AND ATTITUDE OF SAUDI UNIVERSITY'S LEARNERS OF ENGLISH FOR SPECIFIC PURPOSES  

E-Print Network [OSTI]

This study examined the affective factors that intervene in learning English as a Foreign Language (EFL), either for Specific Purposes (ESP) or General Purposes (EGP), for Saudi university students, and how these affective ...

Makrami, Barakat Humoud

2010-05-09T23:59:59.000Z

295

General Information 198 Financial Aid 198  

E-Print Network [OSTI]

197 General Information 198 Financial Aid 198 Program Statements 198 Key to Duluth Abbreviations-University Programs section of this catalog for information about these programs. In addition, the biochemistry offered on the Duluth campus (see General Information at the beginning of this catalog). Financial Aid See

Amin, S. Massoud

296

Corrective Action Management Units and Temporary Units. RCRA Information Brief  

SciTech Connect (OSTI)

On February 16, 1993 the EPA published a final rule that allows either the EPA Regional Administrator or the authorized State to designate areas as corrective action management units (CAMUs) at hazardous waste management facilities for the specific purpose of managing remediation waste that has been generated as part of the facility`s corrective action activities. According to the rule, placement of remediation wastes into or within a CAMU does not constitute land disposal of hazardous waste and is not subject to RCRA land disposal restrictions. In addition, waste disposal units located within CAMUs are not required to be designed in accordance with RCRA minimum technological requirements applicable to land disposal units. This Information Brief explains the advantages of a CAMU designation, defines a Temporary Unit (TU) and explains the advantages of a TU designation. The process for initiating a CAMU or TU designation is described for DOE sites and interim status facilities.

Not Available

1994-03-01T23:59:59.000Z

297

Evolution of toxicology information systems  

SciTech Connect (OSTI)

Society today is faced with new health risk situations that have been brought about by recent scientific and technical advances. Federal and state governments are required to assess the many potential health risks to exposed populations from the products (chemicals) and by-products (pollutants) of these advances. Because a sound analysis of any potential health risk should be based on the use of relevant information, it behooves those individuals responsible for making the risk assessments to know where to obtain needed information. This paper reviews the origins of toxicology information systems and explores the specialized information center concept that was proposed in 1963 as a means of providing ready access to scientific and technical information. As a means of illustrating this concept, the operation of one specialized information center (the Environmental Mutagen Information Center at Oak Ridge National Laboratory) will be discussed. Insights into how toxicological information resources came into being, their design and makeup, will be of value to those seeking to acquire information for risk assessment purposes. 7 refs., 1 fig., 4 tabs.

Wassom, J.S.; Lu, P.Y. [Oak Ridge National Laboratory, TN (United States)

1990-12-31T23:59:59.000Z

298

Registration Information  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Registration Information Registration Information Registration Information Focusing on methods and computational tools used to help sequence, assemble, and finish genomes, including new sequencing technologies. Contact Chris Detter (505) 665-3024 Email Registration is limited to 150 participants so please register ASAP if you plan to attend. There is no deadline for registration. To register, please send an e-mail to Chris Detter with your contact information: Name Citizenship status. Institution information. Area(s) of specific interest. Do you plan to submit an abstract by March 30th? Within 48 hrs of registering you will be sent an e-mail confirmation number that you should include on your abstract if you are submitting one. To submit an abstract, please refer to the Abstract Submission guidelines.

299

College of Engineering Discovery with Purpose www.engineering.iastate.edu  

E-Print Network [OSTI]

Discovery with Purpose www.engineering.iastate.edu Chemistry Placement Options · Chem 177: General ChemistryCollege of Engineering Discovery with Purpose www.engineering.iastate.edu Welcome to the College of Engineering! College of Engineering #12;College of Engineering Discovery with Purpose www.engineering

Lin, Zhiqun

300

General-purpose heat source project and space nuclear safety and fuels program. Progress report  

SciTech Connect (OSTI)

Studies related to the use of /sup 238/PuO/sub 2/ in radioisotopic power systems carried out for the Advanced Nuclear Systems and Projects Division of LASL are presented. The three programs involved are: general-purpose heat source development; space nuclear safety; and fuels program. Three impact tests were conducted to evaluate the effects of a high temperature reentry pulse and the use of CBCF on impact performance. Additionally, two /sup 238/PuO/sub 2/ pellets were encapsulated in Ir-0.3% W for impact testing. Results of the clad development test and vent testing are noted. Results of the environmental tests are summarized. Progress on the Stirling isotope power systems test and the status of the improved MHW tests are indicated. The examination of the impact failure of the iridium shell of MHFT-65 at a fuel pass-through continued. A test plan was written for vibration testing of the assembled light-weight radioisotopic heater unit. Progress on fuel processing is reported.

Maraman, W.J.

1980-02-01T23:59:59.000Z

Note: This page contains sample records for the topic "additional information purpose" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

REQUEST FOR ALIEN INFORMATION PAYEE'S NAME, ADDRESS ABROAD, CITIZENSHIP AND IMMIGRATION INFORMATION  

E-Print Network [OSTI]

REQUEST FOR ALIEN INFORMATION PAYEE'S NAME, ADDRESS ABROAD, CITIZENSHIP AND IMMIGRATION INFORMATION BOX I am a lawful permanent resident of the United States or I hold an Alien Registration Receipt Card are a resident alien for tax purposes. Go to the "test results" section and check the "resident alien" box

Krovi, Venkat

302

Bioinformatics in the information age  

SciTech Connect (OSTI)

There is a well-known story about the blind man examining the elephant: the part of the elephant examined determines his perception of the whole beast. Perhaps bioinformatics--the shotgun marriage between biology and mathematics, computer science, and engineering--is like an elephant that occupies a large chair in the scientific living room. Given the demand for and shortage of researchers with the computer skills to handle large volumes of biological data, where exactly does the bioinformatics elephant sit? There are probably many biologists who feel that a major product of this bioinformatics elephant is large piles of waste material. If you have tried to plow through Web sites and software packages in search of a specific tool for analyzing and collating large amounts of research data, you may well feel the same way. But there has been progress with major initiatives to develop more computing power, educate biologists about computers, increase funding, and set standards. For our purposes, bioinformatics is not simply a biologically inclined rehash of information theory (1) nor is it a hodgepodge of computer science techniques for building, updating, and accessing biological data. Rather bioinformatics incorporates both of these capabilities into a broad interdisciplinary science that involves both conceptual and practical tools for the understanding, generation, processing, and propagation of biological information. As such, bioinformatics is the sine qua non of 21st-century biology. Analyzing gene expression using cDNA microarrays immobilized on slides or other solid supports (gene chips) is set to revolutionize biology and medicine and, in so doing, generate vast quantities of data that have to be accurately interpreted (Fig. 1). As discussed at a meeting a few months ago (Microarray Algorithms and Statistical Analysis: Methods and Standards; Tahoe City, California; 9-12 November 1999), experiments with cDNA arrays must be subjected to quality control. Variables as simple as temperature and illumination differences across a microarray slide can alter readings. Between slides, additional variables add to the difficulty of comparison. For example, John Quackenbush (The Institute for Genomic Research) described the complexities associated with assuring quality control between microarray slides in a presentation both humorous and disquieting in which he demonstrated how air conditioning can affect sample readouts. Manfred Zorn (Lawrence Berkeley National Laboratory, LBNL), chair of a working group on standards, launched a preliminary effort to lay down definitions and standards for microarray analysis with particular emphasis on experimental design, measurement, and analysis documentation.

Spengler, Sylvia J.

2000-02-01T23:59:59.000Z

303

Spacetime information  

Science Journals Connector (OSTI)

In usual quantum theory, the information available about a quantum system is defined in terms of the density matrix describing it on a spacelike surface. This definition must be generalized for extensions of quantum theory which neither require, nor always permit, a notion of state on a spacelike surface. In particular, it must be generalized for the generalized quantum theories appropriate when spacetime geometry fluctuates quantum mechanically or when geometry is fixed but not foliable by spacelike surfaces. This paper introduces a four-dimensional notion of the information available about a quantum systems boundary conditions in the various sets of decohering, coarse-grained histories it may display. This spacetime notion of information coincides with the familiar one when quantum theory is formulable in terms of states on spacelike surfaces but generalizes this notion when it cannot be so formulated. The idea of spacetime information is applied in several contexts: When spacetime geometry is fixed the information available through alternatives restricted to a fixed spacetime region is defined. The information available through histories of alternatives of general operators is compared to that obtained from the more limited coarse grainings of sum-over-histories quantum mechanics that refer only to coordinates. The definition of information is considered in generalized quantum theories. We consider as specific examples time-neutral quantum mechanics with initial and final conditions, quantum theories with nonunitary evolution, and the generalized quantum frameworks appropriate for quantum spacetime. In such theories complete information about a quantum system is not necessarily available on any spacelike surface but must be searched for throughout spacetime. The information loss commonly associated with the evolution of pure states into mixed states in black hole evaporation is thus not in conflict with the principles of generalized quantum mechanics.

James B. Hartle

1995-02-15T23:59:59.000Z

304

Continuity Plan for Labs Purpose: Continuity planning is the process of preparing for crises or disruptions by collecting critical information  

E-Print Network [OSTI]

structures, environmental engineering, biodynamics, etc.) Principal Investigator(s): Number of research staff environment, special equipment, food, and trained staff ­ any of which could be impacted by a disaster event, the responsibility falls to the principal investigators. Is there a plan in place for handling disruptive events

Tsien, Roger Y.

305

General Information  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

ASD General Information ASD General Information APS Resources & Information A list of useful links for APS staff and users. APS Technical Publications Links to APS technical publications. APS Publications Database The official and comprehensive source of references for APS-related journal articles, conference papers, book chapters, dissertations, abstracts, awards, invited talks, etc. Image Library A collection of APS images. Responsibilities & Interfaces for APS Technical Systems Descriptions of the responsibilities of APS technical groups and how they interface with one another. APS Procedures Operational procedures for the APS. APS Specifications Specifications and approvals for upgrades or changes to existing APS hardware and software. APS Radiation Safety Policy & Procedures Committee Minutes

306

An examination of additive-mediated wax nucleation in oil pipeline environments  

Science Journals Connector (OSTI)

As part of a wider study probing the molecular-scale factors important in controlling wax crystallisation processes, the effect of additives on the surface and bulk nucleation of wax crystals from hydrocarbon solution phases was examined. Bulk nucleation data obtained in the absence and presence of two growth inhibiting additives indicated an increase in the meta-stable zone width (MSZW) on addition of both inhibitors, and differences in their kinetics of inhibition. Complementary studies of surface nucleation using a pipe blocking apparatus revealed a lowering in the temperature at which blockage occurred on addition of inhibitor to the model oil, and existence of fractional crystallisation observed in the bulk phase was confirmed. The hydrodynamic dependence of the nucleation process provided added information on how the inhibitors and wax would perform in a field situation, with a strong dependence on shear rate.

A.J Hennessy; A Neville; K.J Roberts

1999-01-01T23:59:59.000Z

307

Core Holes | Open Energy Information  

Open Energy Info (EERE)

Core Holes Core Holes Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Technique: Core Holes Details Activities (8) Areas (7) Regions (0) NEPA(0) Exploration Technique Information Exploration Group: Drilling Techniques Exploration Sub Group: Exploration Drilling Parent Exploration Technique: Exploration Drilling Information Provided by Technique Lithology: Core holes are drilled to identify lithology and mineralization Stratigraphic/Structural: Retrieved samples can be used to identify fracture networks or faults Hydrological: Thermal: Thermal conductivity measurements can be done on retrieved samples. Dictionary.png Core Holes: A core hole is a well that is drilled using a hallow drill bit coated with synthetic diamonds for the purposes of extracting whole rock samples from

308

Tracer Testing | Open Energy Information  

Open Energy Info (EERE)

Tracer Testing Tracer Testing Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Technique: Tracer Testing Details Activities (9) Areas (5) Regions (0) NEPA(0) Exploration Technique Information Exploration Group: Downhole Techniques Exploration Sub Group: Well Testing Techniques Parent Exploration Technique: Well Testing Techniques Information Provided by Technique Lithology: Stratigraphic/Structural: Fracture zones and formation permeability Hydrological: Flow rates, flow direction, hydrologic connections, storativity Thermal: Dictionary.png Tracer Testing: A method based on injecting chemical tracers into the reservoir and monitoring how long it takes and where those tracers travel. The purpose is to model subsurface hydrothermal flow characteristics.

309

Information Resources  

Broader source: Energy.gov [DOE]

We've organized links and information on solar energy technologies and the SunShot Initiative to make it easier for you to find what you're looking for.

310

Information Causality  

E-Print Network [OSTI]

We review the literature on Information Causality. Since it's for a book, we don't think an abstract will be needed at all, so we have written this one just for the sake of the arXiv.

Marcin Paw?owski; Valerio Scarani

2011-12-06T23:59:59.000Z

311

Informed Chemists  

Science Journals Connector (OSTI)

... of communication into local chemistry departments and already working in the documentation field ? Does OSTI not know that British university libraries already act as local agents for other computerized information ...

R. J. DANNATT

1967-10-14T23:59:59.000Z

312

Arkansas Natural Gas LNG Storage Additions (Million Cubic Feet...  

U.S. Energy Information Administration (EIA) Indexed Site

Additions (Million Cubic Feet) Arkansas Natural Gas LNG Storage Additions (Million Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1980's...

313

California Natural Gas LNG Storage Additions (Million Cubic Feet...  

U.S. Energy Information Administration (EIA) Indexed Site

Additions (Million Cubic Feet) California Natural Gas LNG Storage Additions (Million Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1980's...

314

Oregon Natural Gas LNG Storage Additions (Million Cubic Feet...  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

Additions (Million Cubic Feet) Oregon Natural Gas LNG Storage Additions (Million Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1980's 251...

315

Washington Natural Gas LNG Storage Additions (Million Cubic Feet...  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

Additions (Million Cubic Feet) Washington Natural Gas LNG Storage Additions (Million Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1980's...

316

Delaware Natural Gas LNG Storage Additions (Million Cubic Feet...  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

Additions (Million Cubic Feet) Delaware Natural Gas LNG Storage Additions (Million Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1980's...

317

Alabama Natural Gas LNG Storage Additions (Million Cubic Feet...  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

Additions (Million Cubic Feet) Alabama Natural Gas LNG Storage Additions (Million Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1980's...

318

Maine Natural Gas LNG Storage Additions (Million Cubic Feet)  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

Additions (Million Cubic Feet) Maine Natural Gas LNG Storage Additions (Million Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1980's 0...

319

Minnesota Natural Gas LNG Storage Additions (Million Cubic Feet...  

U.S. Energy Information Administration (EIA) Indexed Site

Additions (Million Cubic Feet) Minnesota Natural Gas LNG Storage Additions (Million Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1980's...

320

Nevada Natural Gas LNG Storage Additions (Million Cubic Feet...  

Gasoline and Diesel Fuel Update (EIA)

Additions (Million Cubic Feet) Nevada Natural Gas LNG Storage Additions (Million Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1980's 294...

Note: This page contains sample records for the topic "additional information purpose" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Idaho Natural Gas LNG Storage Additions (Million Cubic Feet)  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

Additions (Million Cubic Feet) Idaho Natural Gas LNG Storage Additions (Million Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1980's 110...

322

New Hampshire Natural Gas LNG Storage Additions (Million Cubic...  

Gasoline and Diesel Fuel Update (EIA)

Additions (Million Cubic Feet) New Hampshire Natural Gas LNG Storage Additions (Million Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9...

323

Louisiana Natural Gas LNG Storage Additions (Million Cubic Feet...  

U.S. Energy Information Administration (EIA) Indexed Site

Additions (Million Cubic Feet) Louisiana Natural Gas LNG Storage Additions (Million Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1980's...

324

Connecticut Natural Gas LNG Storage Additions (Million Cubic...  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

Additions (Million Cubic Feet) Connecticut Natural Gas LNG Storage Additions (Million Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9...

325

Illinois Natural Gas LNG Storage Additions (Million Cubic Feet...  

Gasoline and Diesel Fuel Update (EIA)

Additions (Million Cubic Feet) Illinois Natural Gas LNG Storage Additions (Million Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1980's...

326

New York Natural Gas LNG Storage Additions (Million Cubic Feet...  

Gasoline and Diesel Fuel Update (EIA)

Additions (Million Cubic Feet) New York Natural Gas LNG Storage Additions (Million Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1980's...

327

Missouri Natural Gas LNG Storage Additions (Million Cubic Feet...  

U.S. Energy Information Administration (EIA) Indexed Site

Additions (Million Cubic Feet) Missouri Natural Gas LNG Storage Additions (Million Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1980's 0...

328

Maryland Natural Gas LNG Storage Additions (Million Cubic Feet...  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

Additions (Million Cubic Feet) Maryland Natural Gas LNG Storage Additions (Million Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1980's...

329

Alaska Natural Gas LNG Storage Additions (Million Cubic Feet...  

Gasoline and Diesel Fuel Update (EIA)

Additions (Million Cubic Feet) Alaska Natural Gas LNG Storage Additions (Million Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1960's...

330

South Carolina Natural Gas LNG Storage Additions (Million Cubic...  

Gasoline and Diesel Fuel Update (EIA)

Additions (Million Cubic Feet) South Carolina Natural Gas LNG Storage Additions (Million Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9...

331

Nebraska Natural Gas LNG Storage Additions (Million Cubic Feet...  

Gasoline and Diesel Fuel Update (EIA)

Additions (Million Cubic Feet) Nebraska Natural Gas LNG Storage Additions (Million Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1980's...

332

North Carolina Natural Gas LNG Storage Additions (Million Cubic...  

Gasoline and Diesel Fuel Update (EIA)

Additions (Million Cubic Feet) North Carolina Natural Gas LNG Storage Additions (Million Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9...

333

Rhode Island Natural Gas LNG Storage Additions (Million Cubic...  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

Additions (Million Cubic Feet) Rhode Island Natural Gas LNG Storage Additions (Million Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9...

334

Quantitative studies in effects of additives on protein aggregation  

E-Print Network [OSTI]

Rational design of protein additives has been limited by the understanding of mechanism of protein and additive interaction. In this work we have applied molecular dynamics with all atom potentials in order to study the ...

Shinde, Chetan (Chetan Ulhas)

2007-01-01T23:59:59.000Z

335

Managing Milk Composition: Feed Additives and Production Enhancers  

E-Print Network [OSTI]

Feed additives play an essential role in enhancing production and yield of milk and milk components. Producers should, however, evaluate the cost-to-benefit ratio of each feed additive in their management systems. This publication explains how...

Stokes, Sandra R.; Jordan, Ellen R.; Looper, Mike; Waldner, Dan

2000-12-14T23:59:59.000Z

336

Additive manufacturing and its societal impact: a literature review  

Science Journals Connector (OSTI)

Thirty years into its development, additive manufacturing has become a mainstream manufacturing process. Additive manufacturing build up parts by adding materials one ... parts on-demand. Its advantages over conv...

Samuel H. Huang; Peng Liu; Abhiram Mokasdar

2013-07-01T23:59:59.000Z

337

Upcoming Webinar February 11: Additive Manufacturing for Fuel Cells  

Broader source: Energy.gov [DOE]

On Tuesday, February 11, the Energy Department will present a live webinar on additive manufacturing to stimulate discussion in the hydrogen and fuel cell community on the application of additive manufacturing to prototyping and production.

338

MINNESOTA STATE GRANT ADDITIONAL ELIGIBILITY REVIEW RETURN FORM  

E-Print Network [OSTI]

MINNESOTA STATE GRANT ADDITIONAL ELIGIBILITY REVIEW RETURN FORM: BY MAIL TO: Office of Student--You may be eligible for additional Minnesota State Grant funds if post-secondary credits you earned

Amin, S. Massoud

339

Mechanisms of transition-metal catalyzed additions to olefins  

E-Print Network [OSTI]

....................................................................................................... 33 10 Reaction schematic for 13C KIE studies on free-radical polymerization and ATRP ........... 34 11 Transition structures for (a) the addition of methyl radical to ethylene and (b) the addition of formylmethyl radical to acrolein...

Nowlan, Daniel Thomas

2005-08-29T23:59:59.000Z

340

U.S. Department of Energy U.S. Energy Information Administration  

U.S. Energy Information Administration (EIA) Indexed Site

Production and Preparation Production and Preparation Form EIA-7A PURPOSE The U.S. Energy Information Administration's (EIA) Form EIA-7A, Annual Survey of Coal Production and Preparation, collects coal production data from U.S. coal mining companies. This includes information on the type and status of coal operations, characteristics of coalbeds mined, recoverable reserves, productive capacity and the disposition of coal mined which provides Congress with basic statistics concerning coal supply. These data appear in the Annual Coal Report, the Quarterly Coal Report, the Monthly Energy Review, and the Annual Energy Review. In addition, the EIA uses the data for coal supply analyses and in short-term modeling efforts,

Note: This page contains sample records for the topic "additional information purpose" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Systems simulation of oil additives to grain at terminal elevators  

E-Print Network [OSTI]

in Missouri and Texas. Several of these elevators are using oil additives on a regular basis. In addition to grain samples, operating data such as equipment capacities, operating hours and volume of grain handled were obtained. The grain samples were... in Missouri and Texas. Several of these elevators are using oil additives on a regular basis. In addition to grain samples, operating data such as equipment capacities, operating hours and volume of grain handled were obtained. The grain samples were...

Goforth, Kerry James

2012-06-07T23:59:59.000Z

342

Multi component Nanoparticle Based Lubricant Additive to Improve...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

More Documents & Publications Multi-component Nanoparticle Based Lubricant Additive to Improve Efficiency and Durability in Engines ITP Nanomanufacturing:...

343

Developments in Assisting Countries in Implementing the IAEA Additional Protocol  

SciTech Connect (OSTI)

In 2008, the U.S. Department of Energy (DOE) began assisting selected non-nuclear weapon states in planning and preparing for implementation of the International Atomic Energy Agencys Additional Protocol (AP). Since then, the AP international implementation program has contributed to the substantial progress made by Vietnam, Thailand, Iraq, and Malaysia in preparing for entry-into-force of the AP. An overall engagement plan has been developed with components designed to train government AP implementing agencies, inform policy makers, conduct outreach to industry and universities, make AP reporting software available and useful, and plan a detailed approach for implementing the declaration and complementary access provisions of the AP. DOE recently began collaborating with Indonesia, which has already entered the AP into force, requiring a second method of engagement somewhat different from that taken with countries that have not entered the AP into force. The AP international implementation program, administered by the International Nuclear Safeguards and Engagement Program, is working more closely with DOEs International Nonproliferation Export Control Program to ensure countries are aware of and prepared to implement the export/import provisions of the AP. As the AP implementation program matures and helps move countries closer to entry-into-force or improved AP implementation, it is identifying characteristics of a countrys end-state that indicate that DOE assistance is no longer required. The U.S. AP Implementation Act and Senate Resolution of Ratification require the Administration to report annually to Congress on measures taken to achieve the adoption of the AP in non-nuclear weapon states. DOEs AP international implementation program is a significant part of these measures. This paper describes recent developments to increase the scope and effectiveness of the program.

Killinger, Mark H.; Hansen, Linda H.; Cain, Ronald A.; Kovacic, Don N.; Apt, Kenneth E.; VanSickle, Matthew

2010-08-11T23:59:59.000Z

344

ORNL/TM-2013/108 Beyond Guaranteed Savings: Additional  

E-Print Network [OSTI]

, are generally available free via the U.S. Department of Energy (DOE) Information Bridge. Web site http

Oak Ridge National Laboratory

345

MANUFACTURABILITY ANALYSIS TO COMBINE ADDITIVE AND SUBTRACTIVE PROCESSES  

E-Print Network [OSTI]

MANUFACTURABILITY ANALYSIS TO COMBINE ADDITIVE AND SUBTRACTIVE PROCESSES Authors: Olivier Kerbrat of the tool may advantageously be machined or manufactured by an additive process. Originality/value: Nowadays is proposed to combine additive and subtractive processes, for tooling design and manufacturing

Paris-Sud XI, Université de

346

Highly Selective Acetate Aldol Additions Using Mesityl-Substituted Chiral  

E-Print Network [OSTI]

been reported for acetate-type aldol additions involving the use of tin,7 lithium,8 boron,9Highly Selective Acetate Aldol Additions Using Mesityl-Substituted Chiral Auxiliaries Michael T Highly diastereoselective acetate aldol additions using chlorotitanium enolates of mesityl-substituted N

347

Workshop Purpose  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

7454 7454 Science Challenges and Design Concepts for the Next-Generation High-Performance FT-ICR Mass Spectrometer Summary of a workshop held January 16-17, 2008 at the National High Magnetic Field Laboratory, Tallahassee, Florida Jean H. Futrell Alan G. Marshall David W. Koppenaal Ljiljana Paša-Tolić Julie G. Wiley Organized by the National High Magnetic Field Laboratory and Environmental Molecular Sciences Laboratory Sponsored by the National Science Foundation and the U.S. Department of Energy 1 Introduction Mass spectrometry (MS) is among the most sensitive, molecule-specific, and generally applicable analytical techniques currently available. Although there are many important performance metrics, the mass resolving power of an analytical mass spectrometer is the ultimate

348

I. Purpose  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

is directed to provide incentive payments to the owner or operator of qualified hydroelectric facilities for electric energy generated and sold from a qualified hydroelectric...

349

Computer virus information update CIAC-2301  

SciTech Connect (OSTI)

While CIAC periodically issues bulletins about specific computer viruses, these bulletins do not cover all the computer viruses that affect desktop computers. The purpose of this document is to identify most of the known viruses for the MS-DOS and Macintosh platforms and give an overview of the effects of each virus. The authors also include information on some windows, Atari, and Amiga viruses. This document is revised periodically as new virus information becomes available. This document replaces all earlier versions of the CIAC Computer virus Information Update. The date on the front cover indicates date on which the information in this document was extracted from CIAC`s Virus database.

Orvis, W.J.

1994-01-15T23:59:59.000Z

350

Processing Additives for Improved Efficiency from Bulk Heterojunction Solar Cells  

Science Journals Connector (OSTI)

Add to ACS ChemWorx ... Herein, we clarify the mechanism by which processing additives control the morphology, and using the insight provided by the mechanism, we identify an entire class of processing additives which yields still higher efficiency solar cells than those fabricated with 1,8-octanedithiol as the processing additive. ... AFM images of the BHJ films processed with the additive exhibit larger interconnected regions of PCPDTBT and larger porous domains (the C71-PCBM regions prior to selective removal) compared with images of the BHJ film cast without using the processing additive. ...

Jae Kwan Lee; Wan Li Ma; Christoph J. Brabec; Jonathan Yuen; Ji Sun Moon; Jin Young Kim; Kwanghee Lee; Guillermo C. Bazan; Alan J. Heeger

2008-02-21T23:59:59.000Z

351

Additive manufacturing with friction welding and friction deposition processes  

Science Journals Connector (OSTI)

Most of the commercially available additive manufacturing processes that are meant for fabrication of fully dense metallic parts involve melting and solidification. Consequently, these processes suffer from a variety of metallurgical problems. Processes that can facilitate material addition in solid-state are therefore ideally suited for additive manufacturing. In this work, we explore two new solid-state processes, viz. friction welding and friction deposition, for additive manufacturing. Stainless steel samples produced using these processes showed excellent layer bonding and Z-direction tensile properties. The authors believe that these processes are uniquely capable and can offer significant benefits over existing commercial additive manufacturing processes.

J.J.S. Dilip; G.D. Janaki Ram; B.E. Stucker

2012-01-01T23:59:59.000Z

352

Effective Mechanical Properties of Lattice Material Fabricated by Material Extrusion Additive Manufacturing  

SciTech Connect (OSTI)

In this paper, a two-step homogenization method is proposed and implemented for evaluating effective mechanical properties of lattice structured material fabricated by the material extrusion additive manufacturing process. In order to consider the characteristics of the additive manufacturing process in estimation procedures, the levels of scale for homogenization are divided into three stages the levels of layer deposition, structural element, and lattice structure. The method consists of two transformations among stages. In the first step, the transformation between layer deposition and structural element levels is proposed to find the geometrical and material effective properties of structural elements in the lattice structure. In the second step, the method to estimate effective mechanical properties of lattice material is presented, which uses a unit cell and is based on the discretized homogenization method for periodic structure. The method is implemented for cubic lattice structure and compared to experimental results for validation purposes.

Park, Sang-In [Georgia Institute of Technology, Atlanta; Choi, Seung-kyum [Georgia Institute of Technology, Atlanta; Rosen, David W [Georgia Institute of Technology, Atlanta; Duty, Chad E [ORNL

2014-01-01T23:59:59.000Z

353

Local Information  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Local Information Local Information Local Information Welcome to Golden, Colorado, the location of the 2014 Electrical Safety Workshop. Visiting NREL The National Renewable Energy Laboratory (NREL) has research facilities and offices at several locations in Golden, Colorado (near Boulder), and in Washington, D.C. In Golden, you'll find the NREL Education Center, along with many of our research laboratories and administrative offices. The National Wind Technology Center is a separate facility located about 5 miles south of Boulder. Read more » Transportation NREL is accessible via bus on the Regional Transportation District (RTD) Route 20 from Aurora and Denver. Route 20 travels along 20th Avenue and ends at the NREL Education Center. Visit the RTD Web site or call 303-299-6000 to plan your trip or for more

354

Extension's Role as an Information Source and Channel among Northeast Texas Farmers  

E-Print Network [OSTI]

The purpose of this study was to explore the preferred information sources and delivery channels for farm-related information among selected northeast Texas farmers and describe these results in a manner which might enable the Texas Agri...

Triplett, Brian Lee 1968-

2012-11-06T23:59:59.000Z

355

Additions to Capacity on the U.S. Natural Gas Pipeline Network: 2007  

U.S. Energy Information Administration (EIA) Indexed Site

Energy Information Administration, Office of Oil and Gas, July 2008 1 U.S. natural gas pipeline construction activity accelerated in 2007 with capacity additions to the grid totaling nearly 14.9 billion cubic feet (Bcf) of daily deliverability (Figure 1). These additions were the largest of any year in the Energy Information Administration's (EIA) 10-year database of pipeline construction activity. The increased level of natural gas pipeline construction activity in 2007 conformed to a growth trend that began slowly in 2005 and intensified in 2006. In 2007, about 1,700 miles of pipeline were installed, which was greater than in any year since 2003 (Figure 2). The expansion cycle for natural gas pipeline construction is occurring at the same time as the development of the

356

Additions to Capacity on the U.S. Natural Gas Pipeline Network: 2007  

Gasoline and Diesel Fuel Update (EIA)

Energy Information Administration, Office of Oil and Gas, July 2008 1 U.S. natural gas pipeline construction activity accelerated in 2007 with capacity additions to the grid totaling nearly 14.9 billion cubic feet (Bcf) of daily deliverability (Figure 1). These additions were the largest of any year in the Energy Information Administration's (EIA) 10-year database of pipeline construction activity. The increased level of natural gas pipeline construction activity in 2007 conformed to a growth trend that began slowly in 2005 and intensified in 2006. In 2007, about 1,700 miles of pipeline were installed, which was greater than in any year since 2003 (Figure 2). The expansion cycle for natural gas pipeline construction is occurring at the same time as the development of the

357

Idaho IC 61-1701, Legislative Purposes and Findings for the Siting...  

Open Energy Info (EERE)

Legislative Purposes and Findings for the Siting of Certain Electrical Transmission Facilities Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document-...

358

Office of Information Resources  

Broader source: Energy.gov (indexed) [DOE]

Subpart D--Maintenance and Subpart D--Maintenance and Establishment of Systems of Records 1008.20 Content of systems of records. 1008.21 Collection of information by DOE about an individual for a system of records. 1008.22 Use and collection of social security numbers. 1008.23 Public notice of systems of records. 1008.24 Criminal penalties-failure t o pub- lish a system notice. AUTHORITY: Dept. of Energy Organization Act, Pub. L. 95-91, Executive Order 12091, 42 FR 46267, Privacy Act of 1974, Pub. L. 9>579 (5 U.S.C. 552a). SOURCE: 45 FR 61577. Sept. 16. 1980. unless otherwise noted. Subpart A-General Provisions 8 1008.1 Purpose and scope. (a) This part establishes the proce- dures t o implement the Privacy Act of 1974 (Pub. L. 93-579, 5 U.S.C. 552a) with- in the Department of Energy.

359

Hospital Information System  

Science Journals Connector (OSTI)

Ahospital information system is an information system for processing data, information and knowledge in hospital ...

2008-01-01T23:59:59.000Z

360

Detailed Test Information  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Detailed Test Information Detailed Test Information EPA tests vehicles by running them through a series of driving routines, also called cycles or schedules, that specify vehicle speed for each point in time during the laboratory tests. For 2007 and earlier model year vehicles, only the city and highway schedules were used. Beginning with 2008 models, three additional tests will be used to adjust the city and highway estimates to account for higher speeds, air conditioning use, and colder temperatures. Note: EPA has established testing criteria for electric vehicles and plug-in hybrids that are slightly different than those for conventional vehicles. New Tests City Highway High Speed Air Conditioning Cold Temperature Detailed Comparison EPA Federal Test Procedure (City Schedule): Shows vehicle speed (mph) at each second of test

Note: This page contains sample records for the topic "additional information purpose" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

postgraduate information  

E-Print Network [OSTI]

, biomedical engineering and technology, clean energy, water and the environment, complex systems and materialspostgraduate guide 2014 information technology and management #12;"The knowledge and skills Technology has been an excellent investment in my own development and will be crucial to realising my future

Scholz, Bernhard

362

Information International  

E-Print Network [OSTI]

. Orientation 17 Section 4 ­ Miscellaneous information 18 A. Dates of future academic sessions 18 B. Contact Checklist Back Cover Contents EUROPEAN NATIONALS/RESIDENTS NEED TO READ THE WHOLE OF ALL SECTIONS MARKED NON-EUROPEAN NATIONALS/RESIDENTS NEED TO READ THE WHOLE OF ALL SECTIONS MARKED SECTIONS MARKED SHOULD BE READ BY ALL

Petriu, Emil M.

363

RAPID/Roadmap/8-FD-a | Open Energy Information  

Open Energy Info (EERE)

the IC has been notified by the TP that additional information is needed, the IC then has ten (10) Business Days to provide the information requested. If the IC does not provide...

364

Stabilizing quantum information  

Science Journals Connector (OSTI)

The dynamical-algebraic structure underlying all the schemes for quantum information stabilization is argued to be fully contained in the reducibility of the operator algebra describing the interaction with the environment of the coding quantum system. This property amounts to the existence of a nontrivial group of symmetries for the global dynamics. We provide a unified framework that allows us to build systematically additional classes of error correcting codes and noiseless subsystems. It is shown that by using symmetrization strategies one can artificially produce noiseless subsystems supporting universal quantum computation.

Paolo Zanardi

2000-12-05T23:59:59.000Z

365

Wind energy information guide  

SciTech Connect (OSTI)

This book is divided into nine chapters. Chapters 1--8 provide background and annotated references on wind energy research, development, and commercialization. Chapter 9 lists additional sources of printed information and relevant organizations. Four indices provide alphabetical access to authors, organizations, computer models and design tools, and subjects. A list of abbreviations and acronyms is also included. Chapter topics include: introduction; economics of using wind energy; wind energy resources; wind turbine design, development, and testing; applications; environmental issues of wind power; institutional issues; and wind energy systems development.

NONE

1996-04-01T23:59:59.000Z

366

Winter Storms For More Information  

E-Print Network [OSTI]

-related brochures. You can find more information on flash flooding in the Floods... The Awesome Power brochure site http://www.nws.noaa.gov/om/water/ahps/ pdfs/Floodsbrochure_02_06.pdf. To find additional materials or sleet, heavy snowfall and cold temperatures. · People can become trapped at home or in a car, without

367

Remarks on additivity of the Holevo channel capacity and of the entanglement of formation  

E-Print Network [OSTI]

The purpose of these notes is to discuss the relation between the additivity questions regarding the quantities (Holevo) capacity of a quantum channel T and entanglement of formation of a given bipartite state. In particular, using the Stinespring dilation theorem, we give a formula for the channel capacity involving entanglement of formation. This can be used to show that additivity of the latter for some states can be inferred from the additivity of capacity for certain channels. We demonstrate this connection for a family of group--covariant channels, allowing us to calculate the entanglement cost for many states, including some where a strictly smaller upper bound on the distillable entanglement is known. This is presented in a general framework, extending recent findings of Vidal, Dur and Cirac (e-print quant-ph/0112131). In an appendix we speculate on a general relation of superadditivity of the entanglement of formation, which would imply both the general additivity of this function under tensor produc...

Matsumoto, K; Winter, A; Matsumoto, Keiji; Shimono, Toshiyuki; Winter, Andreas

2004-01-01T23:59:59.000Z

368

Press Room - Press Releases - U.S. Energy Information Administration...  

Gasoline and Diesel Fuel Update (EIA)

Data Browser have also been released to EIA's data application programming interface (API). In addition to providing users with extensive coal information, the browser includes...

369

Lab receives an additional $19 million for environmental cleanup  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Lab receives an additional $19 million for environmental cleanup Lab receives an additional $19 million for environmental cleanup Community Connections: Our link to Northern New Mexico Communities Latest Issue:Dec. 2013 - Jan. 2014 All Issues » submit Lab receives an additional $19 million for environmental cleanup Lab also selects local businesses for five-year contracts June 1, 2013 Governor Susana Martinez visited the Lab in May to urge additional funding for cleanup Governor Susana Martinez visited the Lab in May to urge additional funding for cleanup Contact Editor Linda Anderman Email Community Programs Office Kurt Steinhaus Email Thanks to support from New Mexico Senators Tom Udall and Martin Heinrich, Representatives Ben Ray Lujan and Steve Pearce and Governor Susana Martinez, the Lab has received an additional $19 million for environmental

370

DOE Announces Additional Public Comment Meetings for Draft National  

Broader source: Energy.gov (indexed) [DOE]

DOE Announces Additional Public Comment Meetings for Draft National DOE Announces Additional Public Comment Meetings for Draft National Corridor Designations, May 8, 2007. DOE Announces Additional Public Comment Meetings for Draft National Corridor Designations, May 8, 2007. The U.S. Department of Energy (DOE) today announced that it will hold four additional public meetings for the two draft National Interest Electric Transmission Corridors (National Corridors) during the 60-day public comment period, which will close on July 6, 2007. The four additional meetings will be held in June in: Phoenix, Arizona; Las Vegas, Nevada; Pittsburgh, Pennsylvania; and Rochester, New York. DOE Announces Additional Public Comment Meetings for Draft National Corridor Designations, May 8, 2007. More Documents & Publications DOE Affirms National Interest Electric Transmission Corridor Designations

371

DOE Seeks Additional Input on Next Generation Nuclear Plant | Department of  

Broader source: Energy.gov (indexed) [DOE]

Seeks Additional Input on Next Generation Nuclear Plant Seeks Additional Input on Next Generation Nuclear Plant DOE Seeks Additional Input on Next Generation Nuclear Plant April 17, 2008 - 10:49am Addthis WASHINGTON, DC -The U.S. Department of Energy (DOE) today announced it is seeking public and industry input on how to best achieve the goals and meet the requirements for the Next Generation Nuclear Plant (NGNP) demonstration project work at DOE's Idaho National Laboratory. DOE today issued a Request for Information and Expressions of Interest from prospective participants and interested parties on utilizing cutting-edge high temperature gas reactor technology in the effort to reduce greenhouse gas emissions by enabling nuclear energy to replace fossil fuels used by industry for process heat. "This is an opportunity to advance the development of safe, reliable, and

372

AEO2011: Oil and Gas End-of-Year Reserves and Annual Reserve Additions |  

Open Energy Info (EERE)

End-of-Year Reserves and Annual Reserve Additions End-of-Year Reserves and Annual Reserve Additions Dataset Summary Description This dataset comes from the Energy Information Administration (EIA), and is part of the 2011 Annual Energy Outlook Report (AEO2011). This dataset is table 134, and contains only the reference case. The data is broken down into Crude oil, dry natural gas. Source EIA Date Released April 26th, 2011 (3 years ago) Date Updated Unknown Keywords 2011 AEO EIA end-of-year reserves gas oil Data application/vnd.ms-excel icon AEO2011: Oil and Gas End-of-Year Reserves and Annual Reserve Additions- Reference Case (xls, 58.4 KiB) Quality Metrics Level of Review Peer Reviewed Comment Temporal and Spatial Coverage Frequency Annually Time Period 2008-2035 License License Open Data Commons Public Domain Dedication and Licence (PDDL)

373

Integrated reservoir characterization: Improvement in heterogeneities stochastic modelling by integration of additional external constraints  

SciTech Connect (OSTI)

The classical approach to construct reservoir models is to start with a fine scale geological model which is informed with petrophysical properties. Then scaling-up techniques allow to obtain a reservoir model which is compatible with the fluid flow simulators. Geostatistical modelling techniques are widely used to build the geological models before scaling-up. These methods provide equiprobable images of the area under investigation, which honor the well data, and which variability is the same than the variability computed from the data. At an appraisal phase, when few data are available, or when the wells are insufficient to describe all the heterogeneities and the behavior of the field, additional constraints are needed to obtain a more realistic geological model. For example, seismic data or stratigraphic models can provide average reservoir information with an excellent areal coverage, but with a poor vertical resolution. New advances in modelisation techniques allow now to integrate this type of additional external information in order to constrain the simulations. In particular, 2D or 3D seismic derived information grids, or sand-shale ratios maps coming from stratigraphic models can be used as external drifts to compute the geological image of the reservoir at the fine scale. Examples are presented to illustrate the use of these new tools, their impact on the final reservoir model, and their sensitivity to some key parameters.

Doligez, B.; Eschard, R. [Institut Francais du Petrole, Rueil Malmaison (France); Geffroy, F. [Centre de Geostatistique, Fontainebleau (France)] [and others

1997-08-01T23:59:59.000Z

374

,"U.S. Natural Gas LNG Storage Additions (MMcf)"  

U.S. Energy Information Administration (EIA) Indexed Site

Of Series","Frequency","Latest Data for" ,"Data 1","U.S. Natural Gas LNG Storage Additions (MMcf)",1,"Annual",2012 ,"Release Date:","9302014" ,"Next Release...

375

Obama Administration Announces Additional $42,618,700 for Local...  

Broader source: Energy.gov (indexed) [DOE]

42,618,700 for Local Energy Efficiency Improvements in Colorado Obama Administration Announces Additional 42,618,700 for Local Energy Efficiency Improvements in Colorado March 26,...

376

EIS-0489: Notice of Comment Period Extension and Additional Scoping...  

Broader source: Energy.gov (indexed) [DOE]

Meetings EIS-0489: Notice of Comment Period Extension and Additional Scoping Meetings Jordan Cove Liquefaction Project (Coos County, OR) and Pacific Connector Pipeline Project...

377

EIS-0489: Notice of Additional Public Scoping Meetings | Department...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Public Scoping Meetings EIS-0489: Notice of Additional Public Scoping Meetings Jordan Cove Liquefaction Project (Coos County, OR) and Pacific Connector Pipeline Project...

378

Controlled Experiments on the Effects of Lubricant/Additive ...  

Broader source: Energy.gov (indexed) [DOE]

Ashless) Characteristics on DPF Degradation Effects of lubricant additive chemistries and exhaust conditions on ash properties affecting diesel particulate filter performance....

379

Antagonistic Interaction of Antiwear Additives and Carbon Black  

Science Journals Connector (OSTI)

This antagonism suggests that removal of the ZDDP film by CB may ... a series of other antiwear and extreme pressure additives that might be considered likely to react...

Yewande Olomolehin; Rita Kapadia; Hugh Spikes

2010-01-01T23:59:59.000Z

380

Effect of Nitrogen Additives on Flame Retardant Action of Tributyl...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

of tributyl phosphate (TBP) has been investigated. From the LOI tests on treated cotton it is clear that the nitrogen additives have synergistic action. Estimation of...

Note: This page contains sample records for the topic "additional information purpose" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Obama Administration Announces Additional $14,521,300 for Local...  

Energy Savers [EERE]

4,521,300 for Local Energy Efficiency Improvements in Rhode Island Obama Administration Announces Additional 14,521,300 for Local Energy Efficiency Improvements in Rhode Island...

382

Obama Administration Announces Additional $52,295,100 for Local...  

Energy Savers [EERE]

52,295,100 for Local Energy Efficiency Improvements in Maryland Obama Administration Announces Additional 52,295,100 for Local Energy Efficiency Improvements in Maryland March 26,...

383

Obama Administration Announces Additional $102,508,400 for Local...  

Office of Environmental Management (EM)

02,508,400 for Local Energy Efficiency Improvements in Pennsylvania Obama Administration Announces Additional 102,508,400 for Local Energy Efficiency Improvements in Pennsylvania...

384

Obama Administration Announces Additional $63,817,400 for Local...  

Energy Savers [EERE]

63,817,400 for Local Energy Efficiency Improvements in Arizona Obama Administration Announces Additional 63,817,400 for Local Energy Efficiency Improvements in Arizona March 26,...

385

Obama Administration Announces Additional $33,977,000 for Local...  

Office of Environmental Management (EM)

33,977,000 for Local Energy Efficiency Improvements in Puerto Rico Obama Administration Announces Additional 33,977,000 for Local Energy Efficiency Improvements in Puerto Rico...

386

Experimental and Theoretical Investigation of Lubricant and Additive...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Theoretical Investigation of Lubricant and Additive Effects on Engine Friction Combining data from motored engine friction, a theoretical engine model, a line friction contact...

387

DOE Announces Additional Public Comment Meetings for Draft National...  

Broader source: Energy.gov (indexed) [DOE]

which transmission congestion may addressed, including enhanced energy efficiency, demand response, more local generation, and additional transmission capacity. To submit comments...

388

Slice Contour Modification in Additive Manufacturing for Minimizing Part Errors.  

E-Print Network [OSTI]

??Additive Manufacturing (AM) is a process of manufacturing parts by combining layers of materials which are deposited on top of each other. AM processes have (more)

Sharma, Kunal

2014-01-01T23:59:59.000Z

389

Resource Consumption in Additive Manufacturing with a PSS Approach.  

E-Print Network [OSTI]

??Since the 1980s, additive manufacturing (AM) has gradually advanced from rapid prototyping applications towards fabricating end consumer products. Many small companies may prefer accessing AM (more)

Nopparat, Nanond; Kianian, Babak; Thompson, Anthony

2012-01-01T23:59:59.000Z

390

Additive Manufacturing and Production of Metallic Parts in Automotive Industry.  

E-Print Network [OSTI]

?? Additive Manufacturing (AM) comprises a family of different technologies that build up parts by adding materials layer by layer at a time based on (more)

Beiker Kair, Alexandros

2014-01-01T23:59:59.000Z

391

Development of a Process Planning Module for Metal Additive Manufacturing.  

E-Print Network [OSTI]

??Producing metallic parts using Laser Engineered Net Shaping (LENS) additive manufacturing allows for a wide range of flexibility and customization while reducing waste material compared (more)

Chernow, Eric

2013-01-01T23:59:59.000Z

392

EIS-0369: Notice of Public Comment Period Extension and Additional...  

Broader source: Energy.gov (indexed) [DOE]

Notice of Public Comment Period Extension and Additional Public Meeting Supplemental Yucca Mountain Rail Corridor and Rail Alignment The Department of Energy is now announcing...

393

Backbone Additivity in the Transfer Model of Protein Solvation...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Solvation. Abstract: The transfer model implying additivity of the peptide backbone free energy of transfer is computationally tested. Molecular dynamics simulations are used...

394

Connecticut Liquefied Natural Gas Additions to and Withdrawals...  

Gasoline and Diesel Fuel Update (EIA)

207 164 178 129 260 -68 1980-2013 Additions 1,008 713 651 655 743 558 1980-2013 Withdrawals 802 549 473 526 484 626...

395

NMAC 17.5.440 Extensions, Improvements, Additions, and Cooperative...  

Open Energy Info (EERE)

440 Extensions, Improvements, Additions, and Cooperative Agreements between or among Utilities Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document-...

396

Multi-component Nanoparticle Based Lubricant Additive to Improve...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

of active nanoparticle additive for lubricatns that will minimize sulfur and phosporous content in engine oil, and lower ash forming elements deer08adhvaryu.pdf More Documents &...

397

,"New York Natural Gas LNG Storage Additions (MMcf)"  

U.S. Energy Information Administration (EIA) Indexed Site

Name","Description"," Of Series","Frequency","Latest Data for" ,"Data 1","New York Natural Gas LNG Storage Additions (MMcf)",1,"Annual",2013 ,"Release Date:","10312014"...

398

Characteristics and Effects of Lubricant Additive Chemistry and...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Characteristics and Effects of Lubricant Additive Chemistry and Exhaust Conditions on Diesel Particulate Filter Service Life and Vehicle Fuel Economy Characteristics and Effects of...

399

Obama Administration Announces Additional $21,062,200 for Local...  

Office of Environmental Management (EM)

21,062,200 for Local Energy Efficiency Improvements in Kansas Obama Administration Announces Additional 21,062,200 for Local Energy Efficiency Improvements in Kansas March 26,...

400

Obama Administration Announces Additional $31,449,200 for Local...  

Office of Environmental Management (EM)

31,449,200 for Local Energy Efficiency Improvements in South Carolina Obama Administration Announces Additional 31,449,200 for Local Energy Efficiency Improvements in South...

Note: This page contains sample records for the topic "additional information purpose" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Obama Administration Announces Additional $13,167,500 for Local...  

Office of Environmental Management (EM)

167,500 for Local Energy Efficiency Improvements in South Dakota Obama Administration Announces Additional 13,167,500 for Local Energy Efficiency Improvements in South Dakota...

402

Table 1.1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002  

U.S. Energy Information Administration (EIA) Indexed Site

1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002;" 1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002;" " Level: National and Regional Data; " " Row: NAICS Codes; Column: Energy Sources and Shipments;" " Unit: Physical Units or Btu." " "," "," "," "," "," "," "," "," "," "," ",," " " "," "," ",," "," ",," "," ","Coke and"," ","Shipments"," " " "," ",,"Net","Residual","Distillate","Natural ","LPG and","Coal","Breeze"," ","of Energy Sources","RSE"

403

Table E1.1. First Use of Energy for All Purposes (Fuel and Nonfuel), 1998  

U.S. Energy Information Administration (EIA) Indexed Site

.1. First Use of Energy for All Purposes (Fuel and Nonfuel), 1998;" .1. First Use of Energy for All Purposes (Fuel and Nonfuel), 1998;" " Level: National and Regional Data; " " Row: Values of Shipments and Employment Sizes;" " Column: Energy Sources and Shipments;" " Unit: Trillion Btu." " "," "," "," "," "," "," "," "," "," ",," " " "," ",," "," ",," "," ",," ","Shipments","RSE" "Economic",,"Net","Residual","Distillate",,"LPG and",,"Coke and"," ","of Energy Sources","Row"

404

Table 1.3 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002  

U.S. Energy Information Administration (EIA) Indexed Site

3 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002;" 3 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002;" " Level: National and Regional Data; " " Row: Values of Shipments and Employment Sizes;" " Column: Energy Sources and Shipments;" " Unit: Trillion Btu." " "," "," "," "," "," "," "," "," "," ",," " " "," ",," "," ",," "," ",," ","Shipments","RSE" "Economic",,"Net","Residual","Distillate","Natural ","LPG and",,"Coke and"," ","of Energy Sources","Row"

405

College of Engineering Discovery with Purpose www.engineering.iastate.edu  

E-Print Network [OSTI]

to the College of Engineering website. Hover over "Student Services" and you will see the `Scholarships' link12/6/2011 1 College of Engineering Discovery with Purpose www.engineering.iastate.edu College of Engineering Scholarship Program Joel Johnson, Director, ESS College of Engineering Discovery with Purpose www.engineering

Lin, Zhiqun

406

University of Oklahoma Food Services Policy on Food I. Purpose of policy  

E-Print Network [OSTI]

University of Oklahoma Food Services Policy on Food Allergies I. Purpose of policy The purpose offered to students with food allergies through the Department of Housing and Food Services.1 II. To Whom Services; and (2) Food Service employees. III. Policy Definitions Food Allergens ­ Substances that can

Oklahoma, University of

407

Table 1.2 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002  

U.S. Energy Information Administration (EIA) Indexed Site

2 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002;" 2 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002;" " Level: National and Regional Data; " " Row: NAICS Codes; Column: Energy Sources and Shipments;" " Unit: Trillion Btu." " "," "," "," "," "," "," "," "," "," "," ",," " " "," "," ",," "," ",," "," ",," ","Shipments","RSE" "NAICS"," ",,"Net","Residual","Distillate","Natural ","LPG and",,"Coke and"," ","of Energy Sources","Row"

408

Table A33. Total Primary Consumption of Energy for All Purposes by Employment  

U.S. Energy Information Administration (EIA) Indexed Site

Primary Consumption of Energy for All Purposes by Employment" Primary Consumption of Energy for All Purposes by Employment" " Size Categories, Industry Group, and Selected Industries, 1991 (Continued)" " (Estimates in Trillion Btu)" ,,,,,"Employment Size" ,,,"-","-","-","-","-","-","RSE" "SIC"," "," "," "," "," "," ",,500,"Row" "Code(a)","Industry Groups and Industry","Total","Under 20","20-49","50-99","100-249","250-499","and Over","Factors"," "," "," "," "," "," "," "

409

Table N1.1. First Use of Energy for All Purposes (Fuel and Nonfuel), 1998  

U.S. Energy Information Administration (EIA) Indexed Site

1. First Use of Energy for All Purposes (Fuel and Nonfuel), 1998;" 1. First Use of Energy for All Purposes (Fuel and Nonfuel), 1998;" " Level: National and Regional Data; " " Row: NAICS Codes; Column: Energy Sources and Shipments;" " Unit: Physical Units or Btu." " "," "," "," "," "," "," "," "," "," "," ",," " " "," "," ",," "," ",," "," ","Coke and"," ","Shipments"," " " "," ",,"Net","Residual","Distillate","Natural Gas(e)","LPG and","Coal","Breeze"," ","of Energy Sources","RSE"

410

Information Request Yucca Mountain Site  

Broader source: Energy.gov (indexed) [DOE]

, 2008 , 2008 TO: Sue Tierney, Phil Niedzielski-Eichner, Skila Harris FROM: Chris Kouts SUBJECT: Information Request As requested, enclosed is the additional information you requested last week regarding use of engineered barriers. Please let me know if you need additional information or have any questions. A,4- -/0 7 The Suitability of the Yucca Mountain Site and the Issue of Natural Barriers as the Principal Barriers for Demonstrating Safety This paper addresses two issues that are frequently raised concerning the suitability of the Yucca Mountain site for development as a repository. The first issue is that the Yucca Mountain site is technically unsound and that an engineered barrier system is required because the site is not capable of protecting public health and safety. The second issue is

411

Information Repository  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

3 Information Repository Documents 3 Information Repository Documents WIPP Annual Waste Minimization Report Transmittal of the Waste Isolation Pilot Plant Annual Waste Minimization Report, dated November 14, 2013 Class 1 Permit Modifications and NMED Responses Class 1 Modification, August 29, 2013 WIPP Hazardous Waste Facility Permit EPA I.D. Number NM4890139088. (1. revise a course outline; 2. revise table and panel figures to include Panel 7; 3. update description related to Type B Packages; and 4. update TRUPACT-II and HalfPACT figures) JE Kieling, NMED dated October 13, 2013 Fee Assessment Class 1 Permit Modification WIPP Hazardous Waste Facility Permit EPA I.D. Number NM4890139088-TSDF (Revise a Course Outline; Revise Table and Panel Figures to Include Panel 7; Update Descriptions Related to Type B Packages; and Update TRUPACT-ll and HalfPACT Figures) JM Kieling, NMED dated September 23, 2013

412

Informal Report  

Office of Scientific and Technical Information (OSTI)

W-^^ LA-8034-MS ^ - W-^^ LA-8034-MS ^ - - ^ / Informal Report "c o O o -*-* "co > Specific Heat and Thermal Conductivity of Explosives, Mixtures, and Plastic-Bonded Explosives Determined Experimentally \mm ^ts\ LOS ALAMOS SCIENTIFIC LABORATORY Post Office Box 1663 Los Alamos. New Mexico 87545 DISTR!DU7irM o r TdiS BGGbT.lENT IS UNLIMITED DISCLAIMER This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency Thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately

413

Transmission Information  

E-Print Network [OSTI]

(symbols/s) information rate: R = Rs ·H (bits/s) . Code each symbol by log 2 q bits (BCD), then data rate Rs · log 2 q > R, unless source is equal probable pi = 1/q, 1 # i # q . How to code symbols in an e that the signal exhibits some form of redundancy, which should be exploited when the signal is coded

Chen, Sheng

414

Transmission Information  

E-Print Network [OSTI]

Memoryless source with independent symbols (code each symbol by log 2 q bits is called binary coded decimal (BCD)) mi, pi 1 # i # q # # # # BCD: log 2 q (bits/symbol) symbol rate Rs (symbols/s) data bit rate: Rs/symbol) Information rate R = Rs ·H (bits/s) . How to code symbols to achieve e#ciency (data bit rate = R)? 14 #12

Chen, Sheng

415

Short Implants Might be a Predictable Treatment Alternative to Long Implants Which Often Require Additional Augmentation Procedures  

Science Journals Connector (OSTI)

Article Title and Bibliographic Information Survival of short dental implants for treatment of posterior partial edentulism: a systematic review. Atieh MA, Zadeh H, Stanford CM, CooperLF. Int J Oral Maxillofac Implants 2012;27(6):1323-31. Reviewers Sung-Kiang Chuang, DMD, MD, DMSc, Chun-Teh Lee, DDS, MS Purpose/Question The purpose of this study was to evaluate whether there was a significant difference in the survival of short implants (?8.5mm) and longer implants for the management of posterior partial edentulism Source of Funding Information not available (The authors declared no conflicts of interest in the acknowledgment section) Type of Study/Design Systematic review with meta-analysis of data Level of Evidence Level 2: Limited-quality, patient-oriented evidence Strength of Recommendation Grade Grade B: Inconsistent or limited-quality patient-oriented evidence

Sung-Kiang Chuang; Chun-Teh Lee

2013-01-01T23:59:59.000Z

416

UMBC Policy # X-1.00.02 Page 1 of 3 UMBC INFORMATION TECHNOLOGY SECURITY POLICY  

E-Print Network [OSTI]

UMBC Policy # X-1.00.02 Page 1 of 3 UMBC INFORMATION TECHNOLOGY SECURITY POLICY UMBC Policy # X-1.00.02 I. POLICY STATEMENT UMBC's Information Technology (IT) Security Policy is the basis to its IT resources. II. PURPOSE FOR POLICY The purpose of this policy is to establish an IT security

Adali, Tulay

417

BSCMeasuresInformationRevisionSept2005.doc  

Broader source: Energy.gov (indexed) [DOE]

Federal Procurement System Balanced Scorecard Performance Measures Information Document Office of Procurement and Assistance Management Revised: September 2005 2 Table of Contents Purpose ...................................................................................................... 4 CUSTOMER PERSPECTIVE Customer Satisfaction: Timeliness ........................................................................................... 5 Quality ................................................................................................ 7 Effective Service/Partnership ........................................................................... 9 INTERNAL BUSINESS PERSPECTIVE Acquisition Excellence .................................................................................. 11

418

Control GIS and geo-information modelling  

Science Journals Connector (OSTI)

The contribution deals with the contextual design of spatial-temporal data, distinguishes three GIS level for the purposes of the regional development, land management and government and describes the role of the GIS Web services architecture that makes ... Keywords: control GIS, geo-information modelling, spatial decision support, spatial temporal approach, uncertainty

Dana Klimeov

2006-03-01T23:59:59.000Z

419

Brnsted Acid Catalyzed Addition of Phenols, Carboxylic Acids, and  

E-Print Network [OSTI]

and often toxic metal catalysts, including pal- ladium,2 rhodium,3 ruthenium,4 lanthanides,5 main group-scale applications of these reactions and often generates heavy metal impurities in the product. Direct use of simple addition methods and is an alternative to metal-catalyzed reactions. Nucleophilic addition of phenols

He, Chuan

420

Redox Shuttle Additive, Wins 2014 R&D 100 Award  

Office of Energy Efficiency and Renewable Energy (EERE)

Sandia National Laboratory and the Argonne National Laboratory have developed a chemical solution, known as a redox shuttle additive, a chemical that prevents overcharging by electrochemically locking in a maximum voltage that is dependent on the chemical structure of the additive and the nature of the battery material.

Note: This page contains sample records for the topic "additional information purpose" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Variational inferences for partially linear additive models with variable selection  

Science Journals Connector (OSTI)

This article develops a mean field variational Bayes approximation algorithm for posterior inferences of the recently proposed partially linear additive models with simultaneous and automatic variable selection and linear/nonlinear component identification ... Keywords: Bayesian inference, Mean field variational Bayes, Model selection, Partially linear additive model

Kaifeng Zhao, Heng Lian

2014-12-01T23:59:59.000Z

422

DECISION-THEORETIC ELICITATION OF GENERALIZED ADDITIVE UTILITIES  

E-Print Network [OSTI]

DECISION-THEORETIC ELICITATION OF GENERALIZED ADDITIVE UTILITIES by Darius Brazi¯unas A thesis-theoretic elicitation of generalized additive utilities Darius Brazi¯unas Doctor of Philosophy Graduate Department outcomes that can be represented by a utility function. We assume that user preferences are generalized

Toronto, University of

423

On the method of additional conditions in mathematical physics  

Science Journals Connector (OSTI)

The method of additional conditions gives a well characteristic of the finite stresses near the tip of a crack of the Griffth's problem in fracture mechanics, where it is supposed of a finite elastic potential which entails the zero value of the J-integral. ... Keywords: Griffth's problem, Laplace equation, fracture, method of additional conditions, singularity

Igor Neygebauer

2011-04-01T23:59:59.000Z

424

DOE Announces Additional Public Comment Meetings for Draft National  

Broader source: Energy.gov (indexed) [DOE]

Announces Additional Public Comment Meetings for Draft National Announces Additional Public Comment Meetings for Draft National Corridor Designations DOE Announces Additional Public Comment Meetings for Draft National Corridor Designations May 8, 2007 - 11:00am Addthis WASHINGTON, DC - The U.S. Department of Energy (DOE) today announced that it will hold four additional public meetings for the two draft National Interest Electric Transmission Corridors (National Corridors) during the 60-day public comment period, which will close on July 6, 2007. The four additional meetings will be held in June in: Phoenix, Arizona; Las Vegas, Nevada; Pittsburgh, Pennsylvania; and Rochester, New York. Dates and locations will be published in the Federal Register in the coming days. DOE previously announced it would host three public meetings at the

425

Predictive Model for Environmental Assessment in Additive Manufacturing Process  

Science Journals Connector (OSTI)

Abstract Additive Manufacturing is an innovative way to produce parts. However its environmental impact is unknown. To ensure the development of additive manufacturing processes it seems important to develop the concept of DFSAM (Design for Sustainable Additive Manufacturing). In fact, one of the objectives of environmental sustainable manufacturing is to minimize the whole flux consumption (electricity, material and fluids) during manufacturing step. To achieve this goal, it is interesting to get a predictive model of consumptions, integrated in the design step, allowing to evaluate the product's environmental impact during the manufacturing step. This paper presents a new methodology for electric, fluids and raw material consumptions assessment for additive manufacturing processes, in particular for a direct metal deposition process. The methodology will help engineers to design parts optimized for additive manufacturing with an environmental point of view.

Florent Le Bourhis; Olivier Kerbrat; Lucas Dembinski; Jean-Yves Hascoet; Pascal Mognol

2014-01-01T23:59:59.000Z

426

Environmental remediation and waste management information systems  

SciTech Connect (OSTI)

The purpose of this paper is to document a few of the many environmental information systems that currently exist worldwide. The paper is not meant to be a comprehensive list; merely a discussion of a few of the more technical environmental database systems that are available. Regulatory databases such as US Environmental Protection Agency`s (EPA`s) RODS (Records of Decision System) database [EPA, 1993] and cost databases such as EPA`s CORA (Cost of Remedial Action) database [EPA, 1993] are not included in this paper. Section 2 describes several US Department of Energy (DOE) Environmental Restoration and Waste Management (EM) information systems and databases. Section 3 discusses several US EPA information systems on waste sites and technologies. Section 4 summarizes a few of the European Community environmental information systems, networks, and clearinghouses. And finally, Section 5 provides a brief overview of Geographical Information Systems. Section 6 contains the references, and the Appendices contain supporting information.

Harrington, M.W.; Harlan, C.P.

1993-12-31T23:59:59.000Z

427

General-purpose heat source: Research and development program. Radioisotope thermoelectric generator impact tests: RTG-1 and RTG-2  

SciTech Connect (OSTI)

The General-Purpose Heat Source (GPHS) provides power for space missions by transmitting the heat of {sup 238}Pu decay to an array of thermoelectric elements in a radioisotope thermoelectric generator (RTG). Because the potential for a launch abort or return from orbit exists for any space mission, the heat source response to credible accident scenarios is being evaluated. The first two RTG Impact Tests were designed to provide information on the response of a fully loaded RTG to end-on impact against a concrete target. The results of these tests indicated that at impact velocities up to 57 m/s the converter shell and internal components protect the GPHS capsules from excessive deformation. At higher velocities, some of the internal components of the RTG interact with the GPHS capsules to cause excessive localized deformation and failure.

Reimus, M.A.H.; Hinckley, J.E.; George, T.G.

1996-07-01T23:59:59.000Z

428

General-purpose heat source: Research and development program, radioisotope thermoelectric generator/thin fragment impact test  

SciTech Connect (OSTI)

The general-purpose heat source provides power for space missions by transmitting the heat of {sup 238}Pu decay to an array of thermoelectric elements in a radioisotope thermoelectric generator (RTG). Because the potential for a launch abort or return from orbit exists for any space mission, the heat source response to credible accident scenarios is being evaluated. This test was designed to provide information on the response of a loaded RTG to impact by a fragment similar to the type of fragment produced by breakup of the spacecraft propulsion module system. The results of this test indicated that impact by a thin aluminum fragment traveling at 306 m/s may result in significant damage to the converter housing, failure of one fueled clad, and release of a small quantity of fuel.

Reimus, M.A.H.; Hinckley, J.E.

1996-11-01T23:59:59.000Z

429

SWERA/TMY Resource Information | Open Energy Information  

Open Energy Info (EERE)

TMY Resource Information TMY Resource Information < SWERA Jump to: navigation, search SWERA logo.png Solar and Wind Energy Resource Assessment (SWERA) Interactive Web PortalPowered by OpenEI Getting Started Data Sets Analysis Tools About SWERA TMY Resource Information Example of TMY Map Hourly Solar and Typical Meteorological Year (TMY) data are available for certain stations in select countries. These data sets provide hourly values of solar radiation and other meteorological elements for a typical 1-year period. Their intended use is for computer simulations of solar energy conversion systems and building systems to facilitate performance comparisons of different system types. Additional TMY data sets are available from the EnergyPlus web site. Retrieved from "http://en.openei.org/w/index.php?title=SWERA/TMY_Resource_Information&oldid=373620

430

Part B - Requirements & Funding Information PART B - Requirements and Funding Information  

Broader source: Energy.gov (indexed) [DOE]

b. Part B 1 b. Part B 1 Part B - Requirements & Funding Information PART B - Requirements and Funding Information Gray highlights are instructions. Remove the instructions from the interagency agreement. Attachment 3.b. Part B 2 PART B - Requirements & Funding Information B.1. Purpose This is an interagency transaction. An interagency transaction is an intra-governmental transaction when the servicing agency uses internal resources to support the requesting agency requirement and is a reimbursable activity that requires an interagency agreement. This Part of the interagency agreement (IA) (hereinafter 'Part B') serves as the funding document. It provides specific information on the requirements of the Department of Energy, hereinafter 'the Requesting

431

Smart meters | Open Energy Information  

Open Energy Info (EERE)

meters meters Jump to: navigation, search Smart meters are part of the initiative to install a smart grid to better power the United States in the coming year, helping incorporate renewable energy technologies into the grid while also making the existing grid more efficient. About Smart Grid Smartgridlogo.png The purpose of smart meters is to aid development of the United States Smart Grid initiative. The purpose of Smart Grid "to support the modernization of the nation's electricity transmission and distribution system to maintain a reliable and secure electricity infrastructure, outlined in Title XIII of the Energy Independence and Security Act of 2007 (PDF 821 KB)." More in-depth information can be found at SmartGrid.gov. It is believed that the implementation of a new Smart Grid "will make our grid more secure

432

Data:19906e8e-039d-435a-8bc5-824c7300065e | Open Energy Information  

Open Energy Info (EERE)

2. Demand 3. Energy << Previous 1 2 3 Next >> Basic Information Utility name: Entergy Power, Inc Effective date: 20140228 End date if known: Rate name: general purpose...

433

Data:F1250140-b853-40c1-8080-76343bd239b6 | Open Energy Information  

Open Energy Info (EERE)

2. Demand 3. Energy << Previous 1 2 3 Next >> Basic Information Utility name: Entergy Power, Inc Effective date: 20140228 End date if known: Rate name: general purpose...

434

Information Security  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

Establishes security requirements for the protection and control of information and matter required to be classified or controlled by statutes, regulations, or Department of Energy directives. Section E, Technical Surveillance Countermeasures Program, is Official Use Only. Please contact the DOE Office of Health, Safety and Security at 301-903-0292 if your official duties require you to have access to this part of the directive. Cancels: DOE M 471.2-1B, DOE M 471.2-1C, DOE M 471.2-4, and DOE O 471.2A

2007-06-29T23:59:59.000Z

435

Information Security  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

This Manual establishes security requirements for the protection and control of information and matter required to be classified or controlled by statutes, regulations, or Department of Energy directives. Attachment E, Technical Surveillance Countermeasures Program, is for Official Use Only. Contact the Office of Security and Safety Performance Assurance at 301-903-3653 if your official duties require you to have access to this part of the directive. Cancels: DOE M 471.2-1B, DOE M 471.2-1C, DOE M 471.2-4, and DOE O 471.2A.

2005-08-26T23:59:59.000Z

436

Information erasure  

Science Journals Connector (OSTI)

Landauers principle states that in erasing one bit of information, on average, at least kBT ln(2) energy is dissipated into the environment (where kB is Boltzmanns constant and T is the temperature of the environment at which one erases). Here, Landauers principle is microscopically derived without direct reference to the second law of thermodynamics. This is done for a classical system with continuous space and time, with discrete space and time, and for a quantum system. The assumption made in all three cases is that during erasure the bit is in contact with a thermal reservoir.

Barbara Piechocinska

2000-05-17T23:59:59.000Z

437

Fuel additive programs at crossroads of regulation, market dynamics  

SciTech Connect (OSTI)

Fuel additive manufacturers, gasoline marketers and automakers seem to be forgetting about the power of the marketplace in their efforts to use additives to help reduce emissions and improve vehicle performance. Recall that the port fuel injector (PFI) and intake valve deposit (IVD) problems of the 1980s were addressed quickly by the fuels industry. In just a few months after the PFID problem surfaced, additive makers had detergents on the market, and fuel marketers followed up with an effective advertising campaign. Formal regulations came about a decade later. The solution to the BMW IVD problem was similar. BMW provided an enticing incentive for oil companies to differentiate through better additives and many did. Contrast those developments with the command-and-control approach that has been in effect since January 1995. EPA`s additive rule is working almost to perfection - if adherence to strict rules is considered. All gasolines in the US are additized, and a wide variety of packages have been developed that meet the regulatory standards. But by the measure of real-world performance, the circumstances can look quite different. And with industry finalizing a better IVD test and conducting research into the need for a combustion chamber deposit (CCD) regulation, now may be the time to limit the regulatory approach and let refiners and additive suppliers return to creating products that target excellence instead of regulatory minimums.

Adler, K.

1998-01-01T23:59:59.000Z

438

Data:54207449-b218-41bc-ad6c-6c3782556408 | Open Energy Information  

Open Energy Info (EERE)

54207449-b218-41bc-ad6c-6c3782556408 54207449-b218-41bc-ad6c-6c3782556408 No revision has been approved for this page. It is currently under review by our subject matter experts. Jump to: navigation, search Loading... 1. Basic Information 2. Demand 3. Energy << Previous 1 2 3 Next >> Basic Information Utility name: Texas-New Mexico Power Co Effective date: 2013/01/01 End date if known: Rate name: Residential Service Sector: Residential Description: This schedule is applicable to Delivery Service for residential purposes of a permanent nature to individual private dwellings and to individually metered apartments when such Delivery Service is to one Point of Delivery and measured through one Meter and is not for shared or resale purposes. Delivery Service will be single-phase, 60 hertz, at a standard secondary voltage. Delivery Service will be metered using Company's standard watt-hour Meter provided for this type of Delivery Service. Any other metering option(s) will be provided at an additional charge. Where Delivery Service of the type desired is not available at the Point of Delivery, additional charges and special contract arrangements may be required prior to Delivery Service being furnished, pursuant to Section 6.1.2.2 of this Tariff.

439

Core Analysis | Open Energy Information  

Open Energy Info (EERE)

Core Analysis Core Analysis Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Technique: Core Analysis Details Activities (41) Areas (28) Regions (2) NEPA(0) Exploration Technique Information Exploration Group: Lab Analysis Techniques Exploration Sub Group: Rock Lab Analysis Parent Exploration Technique: Rock Lab Analysis Information Provided by Technique Lithology: Core analysis is done to define lithology. Stratigraphic/Structural: Core analysis can locate faults or fracture networks. Oriented core can give additional important information on anisotropy. Hydrological: Thermal: Thermal conductivity can be measured from core samples. Cost Information Low-End Estimate (USD): 2,000.00200,000 centUSD 2 kUSD 0.002 MUSD 2.0e-6 TUSD / 30 foot core Median Estimate (USD): 10,000.001,000,000 centUSD

440

Influence of Additives on Alkaline Etching of Silicon(111)  

Science Journals Connector (OSTI)

Figure 9. Pit triangularity at 50 C, KOH concentration 0.5 and 5 M and 1 M organic or ionic additive added to the solution. ... This increase can be realized by adding organic additives, which lower the solubility of the silicon reaction products. ... For the 5 M solutions the vertical etch rate is not changed, for the 0.5 M KOH solutions the etch rate is decreased, which might be explained by an interaction of the additive with the crystal surface, thereby hindering the access of the reactants H2O and OH? and removal of reaction products. ...

I. A. Shah; A. J. J. Koekkoek; W. J. P. van Enckevort; E. Vlieg

2009-08-31T23:59:59.000Z

Note: This page contains sample records for the topic "additional information purpose" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Design for Additive ManufacturingElement transitions and aggregated structures  

Science Journals Connector (OSTI)

Abstract Additive Manufacturing technologies create parts layer by layer. Thereby, lots of benefits are offered. Especially extended design freedoms provide new potentials for the design of technical parts. To make these benefits accessible to different user groups, design rules for Additive Manufacturing were developed within the project Direct Manufacturing Design Rules. Therefore a process independent method was defined first. Next, design rules were developed for Laser Sintering, Laser Melting and Fused Deposition Modeling. The results were summarized in a design rule catalog and support a suitable design for Additive Manufacturing.

Guido A.O. Adam; Detmar Zimmer

2014-01-01T23:59:59.000Z

442

Zeroth Law compatibility of non-additive thermodynamics  

E-Print Network [OSTI]

Non-extensive thermodynamics was criticized among others by stating that the Zeroth Law cannot be satisfied with non-additive composition rules. In this paper we determine the general functional form of those non-additive composition rules which are compatible with the Zeroth Law of thermodynamics. We find that this general form is additive for the formal logarithms of the original quantities and the familiar relations of thermodynamics apply to these. Our result offers a possible solution to the longstanding problem about equilibrium between extensive and non-extensive systems or systems with different non-extensivity parameters.

T. S. Bir; P. Vn

2011-01-31T23:59:59.000Z

443

Corn fiber hulls as a food additive or animal feed  

DOE Patents [OSTI]

The present invention provides a novel animal feed or food additive that may be made from thermochemically hydrolyzed, solvent-extracted corn fiber hulls. The animal feed or food additive may be made, for instance, by thermochemically treating corn fiber hulls to hydrolyze and solubilize the hemicellulose and starch present in the corn fiber hulls to oligosaccharides. The residue may be extracted with a solvent to separate the oil from the corn fiber, leaving a solid residue that may be prepared, for instance by aggolmerating, and sold as a food additive or an animal feed.

Abbas, Charles (Champaign, IL); Beery, Kyle E. (Decatur, IN); Cecava, Michael J. (Decatur, IN); Doane, Perry H. (Decatur, IN)

2010-12-21T23:59:59.000Z

444

INFORMAL REPORT  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

q?% q?% LA-5031 -MS INFORMAL REPORT krs $ 1 0 s N o t e on Inverse Bremsstrahlung in Strong E!ect:omGgnetic c;alPl I j a l a m o s scientific laboratory of the University of California LOS A L A M O S , NEW MEXICO 8 7 5 4 4 U N I T E D S T A T E S A T O M I C E N E R G Y C O M M I S S I O N a This report was prepared as an account of work sponsored by the United States Government. Neither the United States nor the United States Atomic Energy Commission, nor any of their employees, nor any of their contrac- tors, subcontractors, or their employees, makes any warranty, express or im- plied, or assumes any legal liability or responsibility for the accuracy, com- pleteness or usefulness of any information, apparatus, product or process dis- closed, or represents that its use would not infringe privately owned rights.

445

REQUEST FOR INFORMATION Student Information System  

E-Print Network [OSTI]

REQUEST FOR INFORMATION Student Information System This form is to be used by those requesting information from the Registrar's Office. Federal privacy regulations require strict monitoring of access to student information. PERSONS OR ORGANIZATIONS MUST DEMOSTRATE THAT THE INFORMATION IS NEEDED

Thaxton, Christopher S.

446

predictive information, multi-information, and binding  

E-Print Network [OSTI]

predictive information, multi-information, and binding information Samer Abdallah and Mark Plumbley.1 ­ December 9, 2010 Abstract We introduce an information theoretic measure of dependency between multiple random variables, called `binding information' and compare it with several previously proposed measures

Plumbley, Mark

447

Personal Information Request Request for Personal Information  

E-Print Network [OSTI]

Personal Information Request Request for Personal Information Request for Correction of Personal Information Personal information on this form is collected under Newfoundland and Labrador's Access to Information and Protection of Privacy (ATIPP) Act and will be used to respond to a request for, or correction

deYoung, Brad

448

A General-Purpose mHealth System Relying on Knowledge Acquisition through Artificial Intelligence  

Science Journals Connector (OSTI)

Remote monitoring of patients vital parameters and ensuring mobility of both patient and doctor can greatly profit from real-time tele-monitoring technology. Here a description is given of a multi-purpose and...

Giovanna Sannino; Ivanoe De Falco

2014-01-01T23:59:59.000Z

449

NREL Materials Recycling Procedure Purpose To promote environmental sustainability and stewardship, NREL provides the  

E-Print Network [OSTI]

NREL Materials Recycling Procedure Purpose To promote environmental sustainability and stewardship, NREL provides the infrastructure for workers to incorporate materials recycling in daily operations. This procedure identifies appropriate materials, collection locations, and rules and processes for recycling

450

What it means to be Christian: Kierkegaard's purpose as an author  

E-Print Network [OSTI]

My purpose for this thesis is to understand and interpret the meaning and intent of Kierkegaard's authorship. Kierkegaard is emphatically concerned with making his reader aware of essential Christianity and what it means to be a Christian...

Vaughn, Bradley Keith

2012-06-07T23:59:59.000Z

451

General Purpose Steam Table Library: CASL L3:THM.CFD.P7.04 Milestone...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

General Purpose Steam Table Library: CASL L3:THM.CFD.P7.04 Milestone Report John H. Carpenter, Noel Belcourt, Robert Nourgalieu SNLINL Completed: August 30, 2013 CASL-...

452

Additional Guidance Regarding Application of Current Procedures for Testing  

Broader source: Energy.gov (indexed) [DOE]

Additional Guidance Regarding Application of Current Procedures for Additional Guidance Regarding Application of Current Procedures for Testing Energy Consumption of Clothes Washers with Warm Rinse Cycles, Issued: June 30, 2010 Additional Guidance Regarding Application of Current Procedures for Testing Energy Consumption of Clothes Washers with Warm Rinse Cycles, Issued: June 30, 2010 Additional Guidance Regarding Application of Current Procedures for Testing Energy Consumption of Clothes Washers with Warm Rinse Cycles, Issued: June 30, 2010. Draft of DOE interpretive rule, which sets out DOE's views on the clothes washer testing procedure described in 10 CFR § 430 Appendix J1, having to do with how to apply the testing procedures to washers with a warm rinse option. This draft interpretive rule represents DOE's interpretation of

453

Energy Department Provides Additional Emergency Fuel Loan to Department of  

Broader source: Energy.gov (indexed) [DOE]

Provides Additional Emergency Fuel Loan to Provides Additional Emergency Fuel Loan to Department of Defense as Part of Hurricane Sandy and Nor'easter Recovery Energy Department Provides Additional Emergency Fuel Loan to Department of Defense as Part of Hurricane Sandy and Nor'easter Recovery November 9, 2012 - 7:15pm Addthis NEWS MEDIA CONTACT (202) 586-4940 WASHINGTON - As part of the government-wide response and recovery effort for Hurricane Sandy and the Nor'easter, the Energy Department is providing the Department of Defense with additional ultra-low sulfur diesel fuel from the Northeast Home Heating Oil Reserve in response to a request from the State of Connecticut. The Energy Department will be loaning diesel fuel to the Defense Logistics Agency (DLA), who in turn will provide emergency loans to fuel distributors in Connecticut to address fuel

454

DOE Providing Additional Supercomputing Resources to Study Hurricane  

Broader source: Energy.gov (indexed) [DOE]

Providing Additional Supercomputing Resources to Study Providing Additional Supercomputing Resources to Study Hurricane Effects on Gulf Coast DOE Providing Additional Supercomputing Resources to Study Hurricane Effects on Gulf Coast July 19, 2006 - 3:36pm Addthis WASHINGTON, DC - The U.S. Department of Energy (DOE) announced today that the Office of Science has provided an additional 400,000 supercomputing processor-hours to the U.S. Army Corps of Engineers to simulate Gulf Coast hurricanes. The allocation brings the amount of computational time provided by DOE on supercomputers at its National Energy Research Scientific Computing Center (NERSC) in California to 800,000 processor-hours. "I'm proud that our computing resources at NERSC can be used to create simulations that will help save lives, reduce property loss and protect the

455

Energy Department Authorizes Additional Volume at Proposed Freeport LNG  

Broader source: Energy.gov (indexed) [DOE]

Energy Department Authorizes Additional Volume at Proposed Freeport Energy Department Authorizes Additional Volume at Proposed Freeport LNG Facility to Export Liquefied Natural Gas Energy Department Authorizes Additional Volume at Proposed Freeport LNG Facility to Export Liquefied Natural Gas November 15, 2013 - 3:00pm Addthis NEWS MEDIA CONTACT (202) 586-4940 WASHINGTON - The Energy Department announced today that it has conditionally authorized Freeport LNG Expansion, L.P. and FLNG Liquefaction, LLC (Freeport) to export additional volumes of domestically produced liquefied natural gas (LNG) to countries that do not have a Free Trade Agreement (FTA) with the United States from the Freeport LNG Terminal in Quintana Island, Texas. Freeport previously received approval to export 1.4 billion cubic feet of natural gas a day (Bcf/d) of LNG from this

456

Energy Department Authorizes Additional Volume at Proposed Freeport LNG  

Broader source: Energy.gov (indexed) [DOE]

Additional Volume at Proposed Freeport Additional Volume at Proposed Freeport LNG Facility to Export Liquefied Natural Gas Energy Department Authorizes Additional Volume at Proposed Freeport LNG Facility to Export Liquefied Natural Gas November 15, 2013 - 3:00pm Addthis NEWS MEDIA CONTACT (202) 586-4940 WASHINGTON - The Energy Department announced today that it has conditionally authorized Freeport LNG Expansion, L.P. and FLNG Liquefaction, LLC (Freeport) to export additional volumes of domestically produced liquefied natural gas (LNG) to countries that do not have a Free Trade Agreement (FTA) with the United States from the Freeport LNG Terminal in Quintana Island, Texas. Freeport previously received approval to export 1.4 billion cubic feet of natural gas a day (Bcf/d) of LNG from this facility to non-FTA countries on May 17, 2013. The Freeport Expansion

457

Department of Energy Announces Key Additions to Public Affairs Staff |  

Broader source: Energy.gov (indexed) [DOE]

Announces Key Additions to Public Affairs Announces Key Additions to Public Affairs Staff Department of Energy Announces Key Additions to Public Affairs Staff February 26, 2009 - 12:00am Addthis WASHINGTON, DC - Today, the Department of Energy announced key staff additions to the Office Public Affairs: Dan Leistikow, Director of Public Affairs; Tom Reynolds, Deputy Director of Public Affairs; Stephanie Mueller, Press Secretary; and Tiffany Edwards, Deputy Press Secretary. "I am pleased to have these talented individuals join the Department of Energy", said Secretary Steven Chu. "Having worked on President Obama's presidential campaign Dan, Tom, Stephanie and Tiffany bring knowledge about the President's commitment to end our addiction to foreign oil, invest in alternative and renewable energy, address the global climate crisis and

458

News Release: DOE to Conduct Additional Groundwater Tests at Riverton  

Broader source: Energy.gov (indexed) [DOE]

to Conduct Additional Groundwater Tests at to Conduct Additional Groundwater Tests at Riverton UMTRCA Site News Release: DOE to Conduct Additional Groundwater Tests at Riverton UMTRCA Site July 30, 2012 - 11:08am Addthis News Contact: Contractor, Judy Miller, S.M. Stoller Corporation Public Affairs (970) 248-6363 jmiller@lm.doe.gov Tests will indicate progress of current groundwater remediation strategy The U.S. Department of Energy will conduct additional characterization work at the Riverton, WY, Uranium Mill Tailings Radiation Control Act (UMTRCA) Site this summer, including extensive groundwater and soil sampling. The Department will use the sampling results to update the site conceptual model and to develop a revised groundwater flow and transport model to more accurately simulate natural flushing processes.

459

Non-Traditional Soil Additives: Can They Improve Crop Production?  

E-Print Network [OSTI]

Non-traditional soil additives include soil conditioners such as organic materials and minerals, soil activators that claim to stimulate soil microbes or inoculate soil with new beneficial organisms, and wetting agents that may be marketed...

McFarland, Mark L.; Stichler, Charles; Lemon, Robert G.

2002-06-26T23:59:59.000Z

460

Geothermal: Sponsored by OSTI -- Set-Controlling Additive for...  

Office of Scientific and Technical Information (OSTI)

Set-Controlling Additive for Thermal Shock-Resistant Cement Geothermal Technologies Legacy Collection HelpFAQ | Site Map | Contact Us | Admin Log On HomeBasic Search About...

Note: This page contains sample records for the topic "additional information purpose" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Additivity in the Analysis and Design of HIV Protease Inhibitors  

E-Print Network [OSTI]

We explore the applicability of an additive treatment of substituent effects to the analysis and design of HIV protease inhibitors. Affinity data for a set of inhibitors with a common chemical framework were analyzed to ...

Jorissen, Robert N.

462

Ionic Liquids as Multifunctional Ashless Additives for Engine Lubrication  

Broader source: Energy.gov [DOE]

A group of oil-miscible ionic liquids has been developed by an ORNL-GM team as candidate lubricant additives with promising physical/chemical properties and potential multiple functionalities.

463

Superheated detonation and other detonations with external energy addition  

Science Journals Connector (OSTI)

...An analytical description of a new notion in detonation physics superheated detonation is given. This is stationary detonation of an explosive with external energy addition. Other detonation regimes with e...

V.I. Tarzhanov

1999-10-01T23:59:59.000Z

464

Integration of additive manufacturing process characteristics in a design method  

Science Journals Connector (OSTI)

So as to adapt to an increasingly competitive market, companies need to minimise costs and reduce development time while maintaining high quality. This adaptation requires taking into account all elements of the product life cycle, from needs analysis to manufacturing, at an early stage of design. Because of recent developments, additive manufacturing technologies are now considered as manufacturing processes. The development of a design method suitable to these processes has become a major issue for their development. We have developed a method of Design for Additive Manufacturing (DFAM). This method, based on analysis of topological characteristic of the part studied, is used to evaluate the manufacturability of the part with additive processes. We have also developed an approach to decompose a CAD model that can separate interesting geometries manufactured by additive processes. We tested this method on different test parts, particularly in one area of the medical sector.

Julien Kerninon; Pascal Mognol; Jean-Yves Hascoët

2013-01-01T23:59:59.000Z

465

Quantifying Residual Strains in Specimens Prepared by Additive Layer Manufacturing  

Science Journals Connector (OSTI)

Residual stresses and strains are prevalent in many components, especially those that are made using additive layer manufacturing. The residual strains are superposed onto any ... analysis may lead to inaccurate ...

A. N. Okioga; R. J. Greene; R. A. Tomlinson

2014-01-01T23:59:59.000Z

466

Additive Manufacturing Technologies for Enhancing the Development Process of Biodevices  

Science Journals Connector (OSTI)

A new set of manufacturing techniques and technologies has appeared in the ... by the name of rapid prototyping and manufacturing technologies. They are usually based on additive manufacturing processes and a...

Andrs Daz Lantada; Pilar Lafont Morgado

2013-01-01T23:59:59.000Z

467

DOE Providing Additional Supercomputing Resources to Study Hurricane...  

Broader source: Energy.gov (indexed) [DOE]

Addthis WASHINGTON, DC - The U.S. Department of Energy (DOE) announced today that the Office of Science has provided an additional 400,000 supercomputing processor-hours to the...

468

Lossless fault-tolerant data structures with additive overhead  

E-Print Network [OSTI]

We develop the first dynamic data structures that tolerate ? memory faults, lose no data, and incur only an O(? ) additive overhead in overall space and time per operation. We obtain such data structures for arrays, linked ...

Christiano, Paul F.

469

Virginia Liquefied Natural Gas Additions to and Withdrawals from...  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

58 81 -207 1,588 1,296 40 1980-2013 Additions 869 1,008 664 1,977 1,699 764 1980-2013 Withdrawals 811 927 871 389 402 724...

470

Texas Natural Gas LNG Storage Additions (Million Cubic Feet)  

U.S. Energy Information Administration (EIA) Indexed Site

Natural Gas LNG Storage Additions (Million Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 2010's 0 - No Data Reported; -- Not...

471

Data:5ddafa23-377a-4dd5-a8cf-2e8851449029 | Open Energy Information  

Open Energy Info (EERE)

ddafa23-377a-4dd5-a8cf-2e8851449029 ddafa23-377a-4dd5-a8cf-2e8851449029 No revision has been approved for this page. It is currently under review by our subject matter experts. Jump to: navigation, search Loading... 1. Basic Information 2. Demand 3. Energy << Previous 1 2 3 Next >> Basic Information Utility name: City of Schuyler, Nebraska (Utility Company) Effective date: 2013/01/01 End date if known: Rate name: Irrigation Idle Stand-by Sector: Commercial Description: The irrigation season is generally seven months, between March 15 and October 14. The Department of Utilities may disconnect the transformers between October 15 and March 14 to reduce power loss. At locations where the Department has provided facilities for irrigation service, the Customer may use the facilities for seasonal purposes other than irrigation. Transformers may be left on for an additional cost

472

Data:Dfe2678f-4f39-4ee0-8855-e29581273dbd | Open Energy Information  

Open Energy Info (EERE)

Dfe2678f-4f39-4ee0-8855-e29581273dbd Dfe2678f-4f39-4ee0-8855-e29581273dbd No revision has been approved for this page. It is currently under review by our subject matter experts. Jump to: navigation, search Loading... 1. Basic Information 2. Demand 3. Energy << Previous 1 2 3 Next >> Basic Information Utility name: Northeastern Rural E M C Effective date: 2004/02/27 End date if known: Rate name: Outdoor Lighting Energy: Ballasted Lamps 100W Sector: Lighting Description: I. AVAILABILITY Service is available to any developer, community association, or governmental authority where 120-volt service exists. The cost of service provides for electricity only from existing Northeastern REMC (Northeastern) facilities. Any investment occasioned by the extension of secondary lines or the installation of a transformer for the sole purpose of this service shall require a contract setting forth the charge for the additional investment.

473

Data:80060f48-e302-4723-b53c-91b919425787 | Open Energy Information  

Open Energy Info (EERE)

0f48-e302-4723-b53c-91b919425787 0f48-e302-4723-b53c-91b919425787 No revision has been approved for this page. It is currently under review by our subject matter experts. Jump to: navigation, search Loading... 1. Basic Information 2. Demand 3. Energy << Previous 1 2 3 Next >> Basic Information Utility name: Northeastern Rural E M C Effective date: 2004/02/27 End date if known: Rate name: Outdoor Lighting Energy: Ballasted Lamps 175W Sector: Lighting Description: I. AVAILABILITY Service is available to any developer, community association, or governmental authority where 120-volt service exists. The cost of service provides for electricity only from existing Northeastern REMC (Northeastern) facilities. Any investment occasioned by the extension of secondary lines or the installation of a transformer for the sole purpose of this service shall require a contract setting forth the charge for the additional investment.

474

Table A30. Total Primary Consumption of Energy for All Purposes by Value of  

U.S. Energy Information Administration (EIA) Indexed Site

0. Total Primary Consumption of Energy for All Purposes by Value of" 0. Total Primary Consumption of Energy for All Purposes by Value of" "Shipment Categories, Industry Group, and Selected Industries, 1991" " (Estimates in Trillion Btu)" ,,,," Value of Shipments and Receipts(b)" ,,,," ","(million dollars)" ,,,"-","-","-","-","-","-","RSE" "SIC"," "," "," "," "," "," "," ",500,"Row"," "," "," ",," "," "," "," " "Code(a)","Industry Groups and Industry","Total","Under 20","20-49","50-99","100-249","250-499","and Over","Factors"," "," "," "," "," "," "," "," ",," "

475

An analysis of a relay servomechanism utilizing a general purpose relay  

E-Print Network [OSTI]

LIBRARY A 4 M COLLEGE OF TEXAS AN ANALYSIS OF A RELAY SERVOMECHANISM UTILIZING A GENERAL PURPOSE RELAY A Thesis By Michael George Rekoff, Jr. Submitted to the Graduate School of the Agricultural and Mechanical College of Texas in partial... fulfillment of the requirements for the degree of MASTER OF SCIENCE Ma J or Sub J cot: Electrical Engineering May 1955 AN ANALYSIS OF A RELAY SERVOMECHANISM UTILIZING A GENERAL PURPOSE RELAY A Thesis Michael George Rekofi', Jr. Approved as to style...

Rekoff, Michael G

2012-06-07T23:59:59.000Z

476

In situ combustion with metallic additives SUPRI TR 87  

SciTech Connect (OSTI)

In-situ combustion is the most energy efficient of the thermal oil recovery methods. In this process, a portion of a reservoir`s oil is burned in-situ as fuel to drive the recovery process. In light oil reservoirs, too little fuel may be deposited, making sustained combustion difficult. In heavy oil reservoirs, too much fuel may be deposited leading to high air injection requirements and unfavorable economics. This study has been designed to attack these problems. Water soluble metallic additives are investigated as agents to modify fuel deposition and combustion performance. This report describes seven combustion tube runs using two cradle oils and two metallic additives. The oils are 12{degrees} and 34{degrees} API, both from Cymric (California). The metallic additives tested are ionic nitrate (Fe(NO{sub 3}){sub 3}9H{sub 2}O) and zinc nitrate (Zn(NO{sub 3}){sub 2}6H{sub 2}O). Iron and tin additives improved the combustion efficiency in all cases. Fluctuations in the produced gas compositions were observed in all control runs, but nearly disappeared with the iron and tin additives. The combustion front velocities were also increased by iron and tin. Changes were also observed in the apparent hydrogen to carbon (H/C) ratio of the fuel, heat of combustion, air requirements, and amount of fuel deposited. Iron and tin caused increases in fuel concentration while causing a decrease in air requirement. The increase in fuel concentration varied between the oils, however, tin and iron were consistently more effective than zinc. A particularly interesting result occurred with the Cymric light oil. In the control runs, a sustained combustion front was not achieved, while in the iron additive runs, stable, sustained combustion was achieved. Iron and tin salts are suitable additives to increase fuel deposition when that is needed. Additives suitable for use as a fuel reducing agent have not yet been found. 26 refs., 23 figs, 6 tabs.

Holt, R.J.

1992-07-01T23:59:59.000Z

477

In situ combustion with metallic additives SUPRI TR 87  

SciTech Connect (OSTI)

In-situ combustion is the most energy efficient of the thermal oil recovery methods. In this process, a portion of a reservoir's oil is burned in-situ as fuel to drive the recovery process. In light oil reservoirs, too little fuel may be deposited, making sustained combustion difficult. In heavy oil reservoirs, too much fuel may be deposited leading to high air injection requirements and unfavorable economics. This study has been designed to attack these problems. Water soluble metallic additives are investigated as agents to modify fuel deposition and combustion performance. This report describes seven combustion tube runs using two cradle oils and two metallic additives. The oils are 12{degrees} and 34{degrees} API, both from Cymric (California). The metallic additives tested are ionic nitrate (Fe(NO{sub 3}){sub 3}9H{sub 2}O) and zinc nitrate (Zn(NO{sub 3}){sub 2}6H{sub 2}O). Iron and tin additives improved the combustion efficiency in all cases. Fluctuations in the produced gas compositions were observed in all control runs, but nearly disappeared with the iron and tin additives. The combustion front velocities were also increased by iron and tin. Changes were also observed in the apparent hydrogen to carbon (H/C) ratio of the fuel, heat of combustion, air requirements, and amount of fuel deposited. Iron and tin caused increases in fuel concentration while causing a decrease in air requirement. The increase in fuel concentration varied between the oils, however, tin and iron were consistently more effective than zinc. A particularly interesting result occurred with the Cymric light oil. In the control runs, a sustained combustion front was not achieved, while in the iron additive runs, stable, sustained combustion was achieved. Iron and tin salts are suitable additives to increase fuel deposition when that is needed. Additives suitable for use as a fuel reducing agent have not yet been found. 26 refs., 23 figs, 6 tabs.

Holt, R.J.

1992-07-01T23:59:59.000Z

478

Ionic Liquids as Novel Lubricants and /or Lubricant Additives  

SciTech Connect (OSTI)

This ORNL-GM CRADA developed ionic liquids (ILs) as novel lubricants or oil additives for engine lubrication. A new group of oil-miscible ILs have been designed and synthesized with high thermal stability, non-corrosiveness, excellent wettability, and most importantly effective anti-scuffing/anti-wear and friction reduction characteristics. Mechanistic analysis attributes the superior lubricating performance of IL additives to their physical and chemical interactions with metallic surfaces. Working with a leading lubricant formulation company, the team has successfully developed a prototype low-viscosity engine oil using a phosphonium-phosphate IL as an anti-wear additive. Tribological bench tests of the IL-additized formulated oil showed 20-33% lower friction in mixed and elastohydrodynamic lubrication and 38-92% lower wear in boundary lubrication when compared with commercial Mobil 1 and Mobil Clean 5W-30 engine oils. High-temperature, high load (HTHL) full-size engine tests confirmed the excellent anti-wear performance for the IL-additized engine oil. Sequence VID engine dynamometer tests demonstrated an improved fuel economy by >2% for this IL-additized engine oil benchmarked against the Mobil 1 5W-30 oil. In addition, accelerated catalyst aging tests suggest that the IL additive may potentially have less adverse impact on three-way catalysts compared to the conventional ZDDP. Follow-on research is needed for further development and optimization of IL chemistry and oil formulation to fully meet ILSAC GF-5 specifications and further enhance the automotive engine efficiency and durability.

Qu, J. [ORNL; Viola, M. B. [General Motors Company

2013-10-31T23:59:59.000Z

479

Correlation additivity relation is superadditive for separable states  

E-Print Network [OSTI]

We deny with a concrete example the generality of the correlation subadditivity relation conjectured by Modi et al's [Phys. Rev. Lett. {\\bf 104}, 080501 (2010)] for any quantum state and point out that the correlation additivity relation is actually super-additive for separable states. This work indicates that any effort on explicitly proving the conjecture and finding the subadditivity source is unnecessary and fruitless.

Zhanjun Zhang

2012-02-16T23:59:59.000Z

480

FUZZY COMPREHENSIVE EVALUATION OF RURAL INFORMATION POVERTY IN CHINA  

E-Print Network [OSTI]

FUZZY COMPREHENSIVE EVALUATION OF RURAL INFORMATION POVERTY IN CHINA CASE STUDY OF HEBEI PROVINCE. It is largely restricted the new rural construction and the social harmonious development of villages and towns to estimate rural information poverty of Hebei province. The purpose of this study is to provide a new

Boyer, Edmond

Note: This page contains sample records for the topic "additional information purpose" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

The Morpheus Visualization System : a general-purpose RDF results browser  

E-Print Network [OSTI]

As the amount of information available on the deep web grows, finding ways to make this information accessible is growing increasingly problematic. As some have estimated that the content in the deep web is several orders ...

Shah, Akash G

2009-01-01T23:59:59.000Z

482

Tennessee Natural Gas LNG Storage Additions (Million Cubic Feet)  

U.S. Energy Information Administration (EIA) Indexed Site

Additions (Million Cubic Feet) Additions (Million Cubic Feet) Tennessee Natural Gas LNG Storage Additions (Million Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1980's 1,222 2,508 2,491 977 2,376 2,105 1,766 1,135 2,109 1,879 1990's 3,008 1,522 2,759 2,663 2,985 2,414 2,809 1,875 1,816 2,181 2000's 884 1,606 1,849 1,889 913 1,065 1,391 2,312 2,186 1,867 2010's 1,175 1,688 3,028 - = No Data Reported; -- = Not Applicable; NA = Not Available; W = Withheld to avoid disclosure of individual company data. Release Date: 12/12/2013 Next Release Date: 1/7/2014 Referring Pages: Additions of Liquefied Natural Gas into Storage Tennessee Liquefied Natural Gas Additions to and Withdrawals from Storage Additions of Liquefied Natural Gas into

483

Georgia Natural Gas LNG Storage Additions (Million Cubic Feet)  

U.S. Energy Information Administration (EIA) Indexed Site

Additions (Million Cubic Feet) Additions (Million Cubic Feet) Georgia Natural Gas LNG Storage Additions (Million Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1980's 20,484 1,508 1,555 1,024 678 1,834 1,942 1,150 1,702 2,930 1990's 2,779 1,969 1,573 1,855 3,788 3,746 6,523 3,221 1,760 607 2000's 3,241 6,772 3,426 5,422 5,570 5,971 7,705 2,817 4,372 3,182 2010's 2,693 3,306 2,097 - = No Data Reported; -- = Not Applicable; NA = Not Available; W = Withheld to avoid disclosure of individual company data. Release Date: 12/12/2013 Next Release Date: 1/7/2014 Referring Pages: Additions of Liquefied Natural Gas into Storage Georgia Liquefied Natural Gas Additions to and Withdrawals from Storage Additions of Liquefied Natural Gas into

484

Indiana Natural Gas LNG Storage Additions (Million Cubic Feet)  

U.S. Energy Information Administration (EIA) Indexed Site

Additions (Million Cubic Feet) Additions (Million Cubic Feet) Indiana Natural Gas LNG Storage Additions (Million Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1980's 1,107 1,966 4,352 785 2,714 923 777 806 6,321 737 1990's 1,027 1,517 849 2,320 2,638 1,316 4,337 2,520 1,589 2,000 2000's 795 1,477 1,726 2,197 1,602 831 1,447 2,663 982 691 2010's 1,983 609 0 - = No Data Reported; -- = Not Applicable; NA = Not Available; W = Withheld to avoid disclosure of individual company data. Release Date: 12/12/2013 Next Release Date: 1/7/2014 Referring Pages: Additions of Liquefied Natural Gas into Storage Indiana Liquefied Natural Gas Additions to and Withdrawals from Storage Additions of Liquefied Natural Gas into

485

Virginia Natural Gas LNG Storage Additions (Million Cubic Feet)  

U.S. Energy Information Administration (EIA) Indexed Site

Additions (Million Cubic Feet) Additions (Million Cubic Feet) Virginia Natural Gas LNG Storage Additions (Million Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1980's 1,626 1,876 1,865 1,223 1,812 2,117 1,989 112 231 2,167 1990's 190 173 173 173 116 1,214 1,631 1,096 632 1,318 2000's 972 691 7,692 1,691 973 1,510 487 1,057 869 1,008 2010's 664 1,977 1,699 - = No Data Reported; -- = Not Applicable; NA = Not Available; W = Withheld to avoid disclosure of individual company data. Release Date: 12/12/2013 Next Release Date: 1/7/2014 Referring Pages: Additions of Liquefied Natural Gas into Storage Virginia Liquefied Natural Gas Additions to and Withdrawals from Storage Additions of Liquefied Natural Gas into

486

New Jersey Natural Gas LNG Storage Additions (Million Cubic Feet)  

Gasoline and Diesel Fuel Update (EIA)

Additions (Million Cubic Feet) Additions (Million Cubic Feet) New Jersey Natural Gas LNG Storage Additions (Million Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1980's 3,617 4,658 4,518 4,770 4,781 4,317 5,384 3,236 3,243 1,433 1990's 3,740 2,683 2,422 2,620 4,835 3,055 5,033 3,926 4,922 7,035 2000's 7,688 3,844 6,373 9,189 7,532 8,448 4,574 7,290 5,792 4,919 2010's 3,304 5,018 3,483 - = No Data Reported; -- = Not Applicable; NA = Not Available; W = Withheld to avoid disclosure of individual company data. Release Date: 1/7/2014 Next Release Date: 1/31/2014 Referring Pages: Additions of Liquefied Natural Gas into Storage New Jersey Liquefied Natural Gas Additions to and Withdrawals from Storage Additions of Liquefied Natural Gas into

487

Pyrolysis of lignin for phenols with alkaline additive  

Science Journals Connector (OSTI)

Abstract This study is devoted to investigating the effect of alkaline additives on lignin pyrolysis for producing phenols. The effects of different types and amounts of alkaline additives, i.e., 020wt.% NaOH, KOH, Na2CO3 or K2CO3, on lignin pyrolysis were tested in a fixed bed reactor. The chemicals in the pyrolysis liquid from a commercial alkali lignin with and without alkaline additive were mainly phenols including 2-methoxy-phenol, 2,6-dimethoxy-phenol, alkyl-phenols (free of methoxyl group) and 2-methoxy-4-alkyl-phenols. More vanillin and dimethoxy-benzene appeared in the pyrolysis liquid of alkali lignin and lignin purified from black liquor, respectively. While carbonate additives facilitated the production of methxoy-phenols, more alkyl-phenols were formed with the hydroxide additives. Analysis showed that all the alkaline additives promoted the reactions of decarboxylation or decarbonylation and the removal of unsaturated alkyl branch chains. The strong alkalescence of NaOH and KOH facilitated more deoxygenation of methoxyl groups so that there were more phenols free of methoxyl groups. The pyrolysis of PL resulted in the liquid yields of up to 30wt.% (dry base), and the content of phenols was above 80% in the liquid.

Cuina Peng; Guangyi Zhang; Junrong Yue; Guangwen Xu

2014-01-01T23:59:59.000Z

488

Blast furnace coke quality in relation to petroleum coke addition  

SciTech Connect (OSTI)

The incorporation of petroleum coke as an additive in industrial coking coal blends is a practice often used by steel companies. A suitable blast furnace coke produced by replacing part of the coking coal blend with a suitable petroleum coke (addition of 5 to 15%), was made by Great Lakes Carbon Corporation and successfully tested at several blast furnaces. This coke had lower reactivity, less ash and slightly higher sulfur content than coke made without the addition of petroleum coke. In contrast with these results, it has been reported in a BCRA study that additions of petroleum coke to a strong coking coal, above 5 wt%, increased coke reactivity. These differences may be explained on the basis of the coal or blend characteristics to which petroleum coke is added. Petroleum coke addition seems to give better results if the coal/blend has high fluidity. The present situation in Spain is favorable for the use of petroleum coke. So, a study of laboratory and semi-industrial scale was made to assess the possibility of using petroleum coke as an additive to the typical industrial coal blend coked by the Spanish Steel Company, ENSIDESA. The influence of the petroleum coke particle size was also studied to semi-industrial scale.

Alvarez, R.; Diez, M.A.; Menendez, J.A.; Barriocanal, C.; Pis, J.J. [CSIC, Oviedo (Spain). Inst. Nacional del Carbon; Sirgado, M. [ENSIDESA, Aviles (Spain)

1995-12-01T23:59:59.000Z

489

Iowa Natural Gas LNG Storage Additions (Million Cubic Feet)  

U.S. Energy Information Administration (EIA) Indexed Site

Additions (Million Cubic Feet) Additions (Million Cubic Feet) Iowa Natural Gas LNG Storage Additions (Million Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1980's 3,063 2,576 5,243 256 3,089 289 154 670 477 1,008 1990's 1,196 2,012 4,659 5,671 3,867 2,346 5,262 2,134 1,269 1,697 2000's 1,226 702 943 3,153 1,665 2,626 2,438 3,080 3,178 1,652 2010's 1,458 1,858 1,408 - = No Data Reported; -- = Not Applicable; NA = Not Available; W = Withheld to avoid disclosure of individual company data. Release Date: 12/12/2013 Next Release Date: 1/7/2014 Referring Pages: Additions of Liquefied Natural Gas into Storage Iowa Liquefied Natural Gas Additions to and Withdrawals from Storage Additions of Liquefied Natural Gas into

490

INFORMATION NOTICE  

Broader source: Energy.gov (indexed) [DOE]

NOTICE NOTICE March 30, 2012 In addition to New York state approval requirements, the Champlain Hudson Power Express, Inc. project (Champlain Hudson Project) has applied to the United States Department of Energy (DOE) for a Presidential permit, a permit necessary for the applicant to construct, operate, maintain, and connect the proposed electric transmission line across the U.S.-Canada border. Among other things, DOE will assess the potential environmental impacts of the Champlain Hudson Project and determine whether issuance of a Presidential permit is consistent with the public interest. DOE is aware that the New York State Public Service Commission (Commission) will hold public statement hearings in April on the Joint Proposal submitted to the Commission on

491

REDD+ Database | Open Energy Information  

Open Energy Info (EERE)

REDD+ Database REDD+ Database Jump to: navigation, search Tool Summary Name: REDD+ Database Agency/Company /Organization: Institute for Global Environmental Strategies Sector: Land Focus Area: Forestry Topics: Co-benefits assessment, Implementation, Background analysis Resource Type: Dataset Website: redd-database.iges.or.jp/redd/ REDD+ Database Screenshot References: REDD+ Database[1] Overview "The purpose of this database is to make information on REDD+ preparedness activities and projects available in a succinct manner to forest stakeholders and other interested groups, with the objective of supporting efforts to achieve climate change mitigation, resource conservation and positive development outcomes through sustainable forest management." References ↑ "REDD+ Database"

492

Historical. Information.  

Office of Legacy Management (LM)

Historical. Information. Historical. Information. ~ H.. 1 . General Project Rulison Manager' s Report, April. 1973 DISCLAIMER Portions of this document may be illegible in electronic image products. Images are produced from the best available original document. PROJECT RULISON MANAGER'S R E P O R T APRIL 197.3 UNITED STATES ATOMIC ENERGY COMMISSION NEVADA OPERATIONS OFFICE Las Vegas, Nevada PREFACE , The R u l i s o n ' p r o j e c t , d e t o n a t e d September 1 0 , 1969, 'was t h e second n u c l e a r . d e t o n a t i o n designed t o d e t e r m i n e t h e economic and t e c h n i c a l f e a s i b i l i t y . of u s i n g n u c l e a r e x p l o s i v e s t o s t i m u l a t e an underground, low-productivity n a t u r a l gas r e s e r v o i r . The p r o j e c t was p a r t of t h e Atomic Energy Commission's (AEC) Plowshare program f o r d e v e l o p i n g p e a c e f u l a p p l i c a t i o n of n u c l e a r e x p l

493

Information Technology and Libraries  

E-Print Network [OSTI]

Sue Chesley Perry 196 INFORMATION TECHNOLOGY AND LIBRARIES |LITA - Library & Information Technology Association). Two of the 190 INFORMATION TECHNOLOGY AND LIBRARIES |

Hubble, Ann; Murphy, Deborah A.; Perry, Susan Chesley

2011-01-01T23:59:59.000Z

494

Geographic Information System (GIS)  

Science Journals Connector (OSTI)

The geographic information system is abranch of health information system and public health information system ...developed for the capture, storage, manipulation, analysis, and visualization of geographic ...

2008-01-01T23:59:59.000Z

495

Characterization of Effect of Support Structures in Laser Additive Manufacturing of Stainless Steel  

Science Journals Connector (OSTI)

Abstract Laser additive manufacturing (LAM) of stainless steel is a layer wisetechnology for fabricating 3D parts from metal powder via selectively melting powder with laser beam. Support structures play a significant role in LAM process as they help to remove heat away from the process and on the other hand hold the work piece in its place. A successful design of support structures can help to achievea building process fast and inexpensive with high quality. Aimof this study was to characterize the usability of two types of support structures: web and tube supports. Purpose of this studywas also to analyze how suitable they are in two industrial application cases: case for dental application and case for jewelry application. It was concluded that the removability of web supports was much better than tube supports. It was noticed that support structures are an important part of LAM process and they strongly affect the manufacturability and the end quality of the part.

Jukka-Pekka Jrvinen; Ville Matilainen; Xiaoyun Li; Heidi Piili; Antti Salminen; Ismo Mkel; Olli Nyrhil

2014-01-01T23:59:59.000Z

496

Massachusetts Natural Gas LNG Storage Additions (Million Cubic Feet)  

U.S. Energy Information Administration (EIA) Indexed Site

Additions (Million Cubic Feet) Additions (Million Cubic Feet) Massachusetts Natural Gas LNG Storage Additions (Million Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1980's 7,885 15,234 14,021 6,599 9,844 9,261 6,184 5,732 5,782 10,004 1990's 6,586 4,399 5,147 5,531 5,550 5,898 6,107 5,049 2,712 3,934 2000's 4,480 6,382 5,683 10,035 9,485 7,643 5,966 10,006 5,863 7,244 2010's 5,507 7,558 3,805 - = No Data Reported; -- = Not Applicable; NA = Not Available; W = Withheld to avoid disclosure of individual company data. Release Date: 12/12/2013 Next Release Date: 1/7/2014 Referring Pages: Additions of Liquefied Natural Gas into Storage Massachusetts Liquefied Natural Gas Additions to and Withdrawals from Storage

497

Pennsylvania Natural Gas LNG Storage Additions (Million Cubic Feet)  

U.S. Energy Information Administration (EIA) Indexed Site

Additions (Million Cubic Feet) Additions (Million Cubic Feet) Pennsylvania Natural Gas LNG Storage Additions (Million Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1980's 4,046 4,051 3,234 1,970 3,714 2,309 2,657 1,381 3,023 2,268 1990's 4,311 2,390 2,869 4,329 5,826 3,523 5,590 4,615 5,092 5,146 2000's 4,918 4,907 862 4,496 2,938 3,416 2,200 2,292 2,683 1,681 2010's 2,353 2,620 2,651 - = No Data Reported; -- = Not Applicable; NA = Not Available; W = Withheld to avoid disclosure of individual company data. Release Date: 12/12/2013 Next Release Date: 1/7/2014 Referring Pages: Additions of Liquefied Natural Gas into Storage Pennsylvania Liquefied Natural Gas Additions to and Withdrawals from Storage

498

The effect of chemical additives on the synthesis of ethanol  

SciTech Connect (OSTI)

The objective of this research is to elucidate the role of various chemical additives on ethanol synthesis over Rh- and Ni-based catalysts. Chemical additives used will include S, P, Ag, Cu, Mn, and Na. The effect of additives on the surface state of the catalysts, heat of adsorption of reactant molecules, reaction intermediates, reaction pathways, reaction kinetics, and product distributions is/will be investigated by a series of studies including temperature programmed desorption, infrared study of NO adsorption, reactive probing, steady state rate measurement, and transient kinetic study. A better understanding of the role of additive may allow us to use chemical additives to manipulate the catalytic properties of Rh- and Ni-based catalysts for producing high yields of ethanol from syngas. CO insertion is known to be a key step to the formation of acetaldehyde and ethanol from CO hydrogenation over Rh catalysts. Ethylene hydroformylation has often served as a probe to determine CO insertion capabilities of Rh catalysts. The mechanism of CO insertion in ethylene hydroformylation over Rh/SiO{sub 2} was investigated.

Chuang, S.S.C.

1989-02-04T23:59:59.000Z

499

Additions to Capacity on the U.S. Natural Gas Pipeline Network: 2005  

Gasoline and Diesel Fuel Update (EIA)

percent increase in capacity additions (see percent increase in capacity additions (see Box, "Capacity Measures," p. 4). Indeed, less new natural gas pipeline mileage was added in 2005 than in any year during the past decade. 1 Energy Information Administration, Office of Oil and Gas, August 2006 1 In 2005, at least 31 natural gas pipeline projects of varying profiles 2 were completed in the lower 48 States and the Gulf of Mexico (Figure 3, Table 1). Of these, 15 were expansions (increases in capacity) on existing natural gas pipelines while the other 16 were 9 system extensions or laterals associated with existing natural gas pipelines, 5 new natural gas pipeline systems, and 2 oil pipeline conversions. Expenditures for natural gas pipeline development amounted to less than $1.3

500

This Flash transmits the second installment under this project. Additional insta  

Broader source: Energy.gov (indexed) [DOE]

This Flash transmits the second installment under this project. Additional installments This Flash transmits the second installment under this project. Additional installments will follow as they are completed. There are two significant chapter revisions in this installment: 6.1, Competition; and 35.1, Scientific and Technical Information. There are also five primarily editorial chapter revisions in this installment, though the revisions include some updated materials as well: 17.2, Cost Participation; 17.4 Program Opportunity Notices; 17.5 Program Research and Development Notices; 22.1, Labor Standards for Construction; and 47.1, Transportation - Air Charter. Finally, three chapters have been removed. Chapter 45, Government Property, was removed because the coverage was obsolete. Chapter 70.1, Cost Participation, was removed because it was duplicative of 17.2 and inappropriate in