Powered by Deep Web Technologies
Note: This page contains sample records for the topic "adapting onsite electrical" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Table 11.4 Electricity: Components of Onsite Generation, 2002  

U.S. Energy Information Administration (EIA) Indexed Site

4 Electricity: Components of Onsite Generation, 2002;" 4 Electricity: Components of Onsite Generation, 2002;" " Level: National and Regional Data; " " Row: Values of Shipments and Employment Sizes;" " Column: Onsite-Generation Components;" " Unit: Million Kilowatthours." " ",,,"Renewable Energy" ,,,"(excluding Wood",,"RSE" "Economic","Total Onsite",,"and",,"Row" "Characteristic(a)","Generation","Cogeneration(b)","Other Biomass)(c)","Other(d)","Factors" ,"Total United States" "RSE Column Factors:",0.8,0.8,1.1,1.4 "Value of Shipments and Receipts"

2

Table 11.3 Electricity: Components of Onsite Generation, 2002  

U.S. Energy Information Administration (EIA) Indexed Site

3 Electricity: Components of Onsite Generation, 2002;" 3 Electricity: Components of Onsite Generation, 2002;" " Level: National and Regional Data; " " Row: NAICS Codes; Column: Onsite-Generation Components;" " Unit: Million Kilowatthours." " "," ",,,"Renewable Energy",," " " "," ",,,"(excluding Wood",,"RSE" "NAICS"," ","Total Onsite",,"and",,"Row" "Code(a)","Subsector and Industry","Generation","Cogeneration(b)","Other Biomass)(c)","Other(d)","Factors" ,,"Total United States" ,"RSE Column Factors:",0.9,0.8,1.1,1.3

3

Table 11.3 Electricity: Components of Onsite Generation, 2010;  

U.S. Energy Information Administration (EIA) Indexed Site

3 Electricity: Components of Onsite Generation, 2010; 3 Electricity: Components of Onsite Generation, 2010; Level: National and Regional Data; Row: NAICS Codes; Column: Onsite-Generation Components; Unit: Million Kilowatthours. Renewable Energy (excluding Wood NAICS Total Onsite and Code(a) Subsector and Industry Generation Cogeneration(b) Other Biomass)(c) Other(d) Total United States 311 Food 5,666 5,414 81 171 3112 Grain and Oilseed Milling 3,494 3,491 Q 2 311221 Wet Corn Milling 3,213 3,211 0 2 31131 Sugar Manufacturing 1,382 1,319 64 0 3114 Fruit and Vegetable Preserving and Specialty Foods 336 325 Q * 3115 Dairy Products 38 36 1 1 3116 Animal Slaughtering and Processing 19 Q Q 14 312 Beverage and Tobacco Products 342 238 Q 7 3121 Beverages 308 204 Q 7 3122 Tobacco 34

4

Table N13.2. Electricity: Components of Onsite Generation, 1998  

U.S. Energy Information Administration (EIA) Indexed Site

2. Electricity: Components of Onsite Generation, 1998;" 2. Electricity: Components of Onsite Generation, 1998;" " Level: National and Regional Data; " " Row: NAICS Codes; Column: Onsite-Generation Components;" " Unit: Million Kilowatthours." " "," ",,,"Renewable Energy",," " " "," ",,,"(excluding Wood",,"RSE" "NAICS"," ","Total Onsite",,"and",,"Row" "Code(a)","Subsector and Industry","Generation","Cogeneration(b)","Other Biomass)(c)","Other(d)","Factors" ,,"Total United States" ,"RSE Column Factors:",1,0.8,1.5,0.9

5

Guide to Purchasing Green Power: Renewable Electricity, Renewable Energy Certificates, and On-Site Renewable Generation  

Energy.gov (U.S. Department of Energy (DOE))

Guide describes the details of purchasing green power. Discussion covers topics like renewable electricity, renewable energy certificates, and on-site renewable generation.

6

Distributed Energy Resources On-Site Optimization for Commercial Buildings with Electric and Thermal Storage Technologies  

E-Print Network (OSTI)

by heat activated absorption cooling, direct-fired naturalsince electric cooling loads can be offset by the absorptioncooling loads: utility purchases of electricity, on-site generation of electricity, absorption

Stadler, Michael

2008-01-01T23:59:59.000Z

7

"Table A17. Components of Onsite Electricity Generation by Census Region,"  

U.S. Energy Information Administration (EIA) Indexed Site

7. Components of Onsite Electricity Generation by Census Region," 7. Components of Onsite Electricity Generation by Census Region," " Industry Group, and Selected Industries, 1991" " (Estimates in Million Kilowatthours)" " "," "," "," "," "," "," "," " " "," "," "," "," "," ","RSE" "SIC"," "," "," "," "," ","Row" "Code(a)","Industry Groups and Industry","Total","Cogeneration","Renewables","Other(b)","Factors" ,,"Total United States" ,"RSE Column Factors:",0.8,0.8,1.4,1.2

8

Table 11.4 Electricity: Components of Onsite Generation, 2010...  

U.S. Energy Information Administration (EIA) Indexed Site

Wood Economic Total Onsite and Characteristic(a) Generation Cogeneration(b) Other Biomass)(c) Other(d) Total United States Value of Shipments and Receipts (million dollars)...

9

"Table A27. Components of Onsite Electricity Generation by Census Region,"  

U.S. Energy Information Administration (EIA) Indexed Site

Components of Onsite Electricity Generation by Census Region," Components of Onsite Electricity Generation by Census Region," " Census Division, Industry Group, and Selected Industries, 1994" " (Estimates in Million Kilowatthours)" ," "," "," "," " " "," "," "," ",," ","RSE" "SIC"," "," "," ",," ","Row" "Code(a)","Industry Group and Industry","Total","Cogeneration","Renewables","Other(b)","Factors" ,,"Total United States" ,"RSE Column Factors:",0.8,0.8,1.6,1 , 20,"Food and Kindred Products",6962,6754,90,118,11.2

10

Table A20. Components of Onsite Electricity Generation by Census Region and  

U.S. Energy Information Administration (EIA) Indexed Site

Components of Onsite Electricity Generation by Census Region and" Components of Onsite Electricity Generation by Census Region and" " Economic Characteristics of the Establishment, 1991" " (Estimates in Million Kilowatthours)" ,,,,,"RSE" " "," "," "," "," ","Row" "Economic Characteristics(a)","Total","Cogeneration","Renewables","Other(b)","Factors" ,"Total United States" "RSE Column Factors:",0.8,0.8,1.2,1.3 "Value of Shipments and Receipts" "(million dollars)" " Under 20",562,349,"W","W",23 " 20-49",4127,3917,79,131,20.1 " 50-99",8581,7255,955,371,10

11

Table A28. Components of Onsite Electricity Generation by Census Region, Cens  

U.S. Energy Information Administration (EIA) Indexed Site

Components of Onsite Electricity Generation by Census Region, Census Division, and" Components of Onsite Electricity Generation by Census Region, Census Division, and" " Economic Characteristics of the Establishment, 1994" " (Estimates in Million Kilowatthours)" ,,,"Renewables" ,,,"(excluding Wood",,"RSE" " "," "," ","and"," ","Row" "Economic Characteristics(a)","Total","Cogeneration(b)","Other Biomass)(c)","Other(d)","Factors" ,"Total United States" "RSE Column Factors:",0.6,0.6,1.8,1.4 "Value of Shipments and Receipts" "(million dollars)" " Under 20",1098,868," W "," W ",22.3

12

Guide to Purchasing Green Power: Renewable Electricity, Renewable Energy Certificates, and On-Site Renewable Generation  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Purchasing Green Power Renewable Electricity, Renewable Energy Certificates, and On-Site Renewable Generation DOE/EE-0307 This guide can be downloaded from: www1.eere.energy.gov/femp/technologies/renewable_purchasingpower.html www.epa.gov/greenpower/ www.wri.org/publications www.resource-solutions.org/publications.php Office of Air (6202J) EPA430-K-04-015 www.epa.gov/greenpower March 2010 ISBN: 1-56973-577-8 Guide to Purchasing Green Power i Table of Contents Summary ........................................................................................................................................................1 Chapter 1: Introduction ....................................................................................................................................2

13

Distributed Energy Resources On-Site Optimization for Commercial Buildings with Electric and Thermal Storage Technologies  

E-Print Network (OSTI)

Gas-Fired Distributed Energy Resource Characterizations”,and J.L. Edwards, “Distributed Energy Resources CustomerN ATIONAL L ABORATORY Distributed Energy Resources On-Site

Stadler, Michael

2008-01-01T23:59:59.000Z

14

Distributed Energy Resources On-Site Optimization for Commercial Buildings with Electric and Thermal Storage Technologies  

SciTech Connect

The addition of storage technologies such as flow batteries, conventional batteries, and heat storage can improve the economic as well as environmental attractiveness of on-site generation (e.g., PV, fuel cells, reciprocating engines or microturbines operating with or without CHP) and contribute to enhanced demand response. In order to examine the impact of storage technologies on demand response and carbon emissions, a microgrid's distributed energy resources (DER) adoption problem is formulated as a mixed-integer linear program that has the minimization of annual energy costs as its objective function. By implementing this approach in the General Algebraic Modeling System (GAMS), the problem is solved for a given test year at representative customer sites, such as schools and nursing homes, to obtain not only the level of technology investment, but also the optimal hourly operating schedules. This paper focuses on analysis of storage technologies in DER optimization on a building level, with example applications for commercial buildings. Preliminary analysis indicates that storage technologies respond effectively to time-varying electricity prices, i.e., by charging batteries during periods of low electricity prices and discharging them during peak hours. The results also indicate that storage technologies significantly alter the residual load profile, which can contribute to lower carbon emissions depending on the test site, its load profile, and its adopted DER technologies.

Lacommare, Kristina S H; Stadler, Michael; Aki, Hirohisa; Firestone, Ryan; Lai, Judy; Marnay, Chris; Siddiqui, Afzal

2008-05-15T23:59:59.000Z

15

Distributed Energy Resources On-Site Optimization for Commercial Buildings with Electric and Thermal Storage Technologies  

SciTech Connect

The addition of storage technologies such as flow batteries, conventional batteries, and heat storage can improve the economic as well as environmental attractiveness of on-site generation (e.g., PV, fuel cells, reciprocating engines or microturbines operating with or without CHP) and contribute to enhanced demand response. In order to examine the impact of storage technologies on demand response and carbon emissions, a microgrid's distributed energy resources (DER) adoption problem is formulated as a mixed-integer linear program that has the minimization of annual energy costs as its objective function. By implementing this approach in the General Algebraic Modeling System (GAMS), the problem is solved for a given test year at representative customer sites, such as schools and nursing homes, to obtain not only the level of technology investment, but also the optimal hourly operating schedules. This paper focuses on analysis of storage technologies in DER optimization on a building level, with example applications for commercial buildings. Preliminary analysis indicates that storage technologies respond effectively to time-varying electricity prices, i.e., by charging batteries during periods of low electricity prices and discharging them during peak hours. The results also indicate that storage technologies significantly alter the residual load profile, which can contribute to lower carbon emissions depending on the test site, its load profile, and its adopted DER technologies.

Lacommare, Kristina S H; Stadler, Michael; Aki, Hirohisa; Firestone, Ryan; Lai, Judy; Marnay, Chris; Siddiqui, Afzal

2008-05-15T23:59:59.000Z

16

Table E13.2. Electricity: Components of Onsite Generation, 1998  

U.S. Energy Information Administration (EIA) Indexed Site

Onsite",,"and",,"Row" "Characteristic(a)","Generation","Cogeneration(b)","Other Biomass)(c)","Other(d)","Factors" ,"Total United States" "RSE Column Factors:",0.9,0.9,1.5,0....

17

Nuclear Maintenance Applications Center: Guide for the Performance of OnSite and Vendor Shop Inspections of Electric Motors  

Science Conference Proceedings (OSTI)

The power industry is experiencing a loss of expertise as its workforce ages. Compounding the problem is that many plants find that there is limited time to train new workers. Periodically, station and corporate motor specialists are asked to perform inspections of on-site motors to maintain a level of equipment reliability or to perform inspections for customers at vendor motor shops. This report should prove valuable during visual inspections of electric motors.

2008-12-19T23:59:59.000Z

18

Onsite Tours  

NLE Websites -- All DOE Office Websites (Extended Search)

science & research Onsite tour info (pdf) | Map of onsite tours (jpg) 1 Aqua Tour, Smart Grid House and Solar Power More info: Los Alamos Smart Grid 2 Yellow Tour, MagViz...

19

Distributed Energy Resources On-Site Optimization for Commercial Buildings with Electric and Thermal Storage Technologies  

E-Print Network (OSTI)

that growth in electricity demand in developed countriesof displacement of electricity demand by heat- activatedmeets all of its electricity demand via utility purchases

Stadler, Michael

2008-01-01T23:59:59.000Z

20

Distributed Energy Resources On-Site Optimization for Commercial Buildings with Electric and Thermal Storage Technologies  

E-Print Network (OSTI)

parameters, i.e. , the electricity tariff structure. Due toenergy loads, 2 electricity and natural gas tariff structureelectricity ($/kWh) demand ($/kW) Natural Gas $/kWh fixed ($/day) Sources: PG&E commercial tariffs,

Stadler, Michael

2008-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "adapting onsite electrical" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Distributed Energy Resources On-Site Optimization for Commercial Buildings with Electric and Thermal Storage Technologies  

E-Print Network (OSTI)

electricity ($/kWh) demand ($/kW) Natural Gas $/kWh fixed (electricity ($/kWh) demand ($/kW) Natural Gas $/kWh fixed (demand via utility purchases and burns natural gas to meet

Stadler, Michael

2008-01-01T23:59:59.000Z

22

Noise emissions from new electric options: Coal conversion and on?site generation  

Science Conference Proceedings (OSTI)

Two alternatives being considered for reducing the use of imported petroleum are the reconversion of oil?fired electric power plants

Allan M. Teplitzky

1981-01-01T23:59:59.000Z

23

Distributed Energy Resources On-Site Optimization for Commercial Buildings with Electric and Thermal Storage Technologies  

E-Print Network (OSTI)

investment; 3. a low storage and PV price run; 4. to assessFigure 5. Low Storage and PV Price (run 3) Diurnal Heat6. Low storage and PV Price (run 3) Diurnal Electricity

Stadler, Michael

2008-01-01T23:59:59.000Z

24

Strategic bidding methodology for electricity markets using adaptive learning  

Science Conference Proceedings (OSTI)

The very particular characteristics of electricity markets, require deep studies of the interactions between the involved players. MASCEM is a market simulator developed to allow studying electricity market negotiations. This paper presents a new proposal ... Keywords: adaptive learning, electricity markets, forecasting methods, intelligent agents, multiagent systems

Tiago Pinto; Zita Vale; Fátima Rodrigues; Hugo Morais; Isabel Praça

2011-06-01T23:59:59.000Z

25

Electricity Market Complex Adaptive System | Open Energy Information  

Open Energy Info (EERE)

Market Complex Adaptive System Market Complex Adaptive System Jump to: navigation, search Tool Summary Name: Electricity Market Complex Adaptive System Agency/Company /Organization: Argonne National Laboratory Sector: Energy Phase: Determine Baseline, Evaluate Options Topics: Pathways analysis Resource Type: Software/modeling tools User Interface: Desktop Application Website: www.dis.anl.gov/projects/emcas.html Country: United States Cost: Paid Northern America Coordinates: 37.09024°, -95.712891° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":37.09024,"lon":-95.712891,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

26

NETL: Onsite Research  

NLE Websites -- All DOE Office Websites (Extended Search)

Research Onsite Research Publications Computed Tomography and Statistical Analysis of Bubble Size Distributions in Atmospheric-Generated Foamed Cement (August 9, 2013) Comparison...

27

A hybrid simulation-adaptive network based fuzzy inference system for improvement of electricity consumption estimation  

Science Conference Proceedings (OSTI)

This paper presents a hybrid adaptive network based fuzzy inference system (ANFIS), computer simulation and time series algorithm to estimate and predict electricity consumption estimation. The difficulty with electricity consumption estimation modeling ... Keywords: Adaptive network based fuzzy inference system, Computer simulation, Electricity consumption, Hybrid, Improvement, Time series

A. Azadeh; M. Saberi; A. Gitiforouz; Z. Saberi

2009-10-01T23:59:59.000Z

28

Onsite fuel cell program-- a status report  

SciTech Connect

The Onsite Fuel Cell Program is designed to produce data for the pioneering of fuel cell use. A fuel cell is an electrochemical device designed to transform the chemical energy of a hydrorich fuel, such as natural gas, into electricity. Under an Energy Service concept, onsite delivery and sale to consumers is promoted. Field test efforts are surveyed--a commercial laundry in Portland, Oregon, for example. Participating utilities in 40 kW cell field tests are mapped out. A project which will define a fuel cell power plant to meet cost requirements is underway.

Flore, V.B.; Cuttica, J.J.

1983-06-01T23:59:59.000Z

29

Advances in electric power systems : robustness, adaptability, and fairness  

E-Print Network (OSTI)

The electricity industry has been experiencing fundamental changes over the past decade. Two of the arguably most significant driving forces are the integration of renewable energy resources into the electric power system ...

Sun, Xu Andy

2011-01-01T23:59:59.000Z

30

Climate change adaptation in the U.S. electric utility sector  

E-Print Network (OSTI)

The electric utility sector has been a focus of policy efforts to reduce greenhouse gas emissions, but even if these efforts are successful, the sector will need to adapt to the impacts of climate change. These are likely ...

Higbee, Melissa (Melissa Aura)

2013-01-01T23:59:59.000Z

31

Life cycle assessment parameters adaptation for Brazilian electricity production.  

E-Print Network (OSTI)

??Electricity is a major concern in the life cycle assessment (LCA) of most products since it is a required input for production of almost all… (more)

Coelho, Carla

2009-01-01T23:59:59.000Z

32

Green Power Network: On-site Renewable Energy Systems  

NLE Websites -- All DOE Office Websites (Extended Search)

On-site Renewable Energy Systems On-site Renewable Energy Systems For consumers or organizations wishing to install on-site renewable energy systems, there are a variety of options available, including electricity generating systems and thermal systems that can displace electricity or fossil fuel use. Solar photovoltaics convert sunlight directly into electricity. Solar hot water systems use the sun's energy to heat water. Wind turbines convert the kinetic energy in wind into mechanical power that runs a generator to produce electricity. Geothermal heat pumps use the constant temperature of the upper 10 feet of the Earth to heat and cool buildings. Fuel cells produce electricity from hydrogen and oxygen and can be powered by a number of sources, including renewables. Biomass power systems use biomass feedstocks such as wood waste or methane from animal waste or other sources to generate electricity. Biomass resources can also be used in direct heat and combined heat and power applications.

33

NETL: Onsite Research- Materials Performance  

NLE Websites -- All DOE Office Websites (Extended Search)

Materials Performance Onsite Research Materials Performance Emerging energy-production technologies such as gasification, solid oxide fuel cells, and ultra supercritical, fluidized...

34

NETL: Onsite Research - University Projects  

NLE Websites -- All DOE Office Websites (Extended Search)

Onsite Research University Projects The National Energy Technology Laboratory (NETL) is helping to overcome a growing national problem of a diminishing number of new energy...

35

Adapting state and national electricity consumption forecasting methods to utility service areas. Final report  

SciTech Connect

This report summarizes the experiences of six utilities (Florida Power and Light Co., Municipal Electric Authority of Georgia, Philadelphia Electric Co., Public Service Co. of Colorado, Sacramento Municipal Utility District, and TVA) in adapting to their service territories models that were developed for forecasting loads on a national or regional basis. The models examined were of both end-use and econometric design and included the three major customer classes: residential, commercial, and industrial.

Swift, M.A.

1984-07-01T23:59:59.000Z

36

NETL: Onsite Research  

NLE Websites -- All DOE Office Websites (Extended Search)

Solid Oxide Fuel Cell Experimental Laboratory Solid Oxide Fuel Cell Experimental Laboratory The National Energy Technology Laboratory's Solid Oxide Fuel Cell Experimental Laboratory (SOFCEL) characterizes the performance and operation of single cells and small stacks. The laboratory is equipped with several test stands capable of evaluating solid oxide fuel cells (SOFC) at pressurized conditions and temperatures up to 1000°C. NETL's onsite researchers support the Solid State Energy Conversion Alliance (SECA) Program with advanced models and simulations that can predict detailed thermal, fluid, solid-mechanic, and electrochemical phenomena for fuel cell analysis and design. The research portfolio includes basic and applied research to assess the effects of contaminants on SOFC cell degradation and performance, and to developing durable high temperature and sulfur-tolerant anode materials. This type of research is important in order to apply SECA-developed technology to future coal-based power systems.

37

Adaptive Fluid Electrical Conductivity Logging to Determine the Salinity Profiles in Groundwater  

E-Print Network (OSTI)

Adaptive Fluid Electrical Conductivity Logging to Determine the Salinity Profiles in Groundwater(t) Analysis Method · Integrate C(z,t), or FEC profile, over z of logged interval to get salinity mass per unit salinity TMDL requires wetland management of salt loads to the San Joaquin River · Dearth of groundwater

Quinn, Nigel

38

"Characteristic(a)","Total(b)","Electricity(c)","Fuel Oil","Fuel Oil(d)","Natural Gas(e)","NGL(f)","Coal","Breeze","Other(g)","Produced Onsite(h)"  

U.S. Energy Information Administration (EIA) Indexed Site

1.3 Relative Standard Errors for Table 1.3;" 1.3 Relative Standard Errors for Table 1.3;" " Unit: Percents." " "," "," "," "," "," "," "," "," "," " " "," ",," "," ",," "," ",," ","Shipments" "Economic",,"Net","Residual","Distillate",,"LPG and",,"Coke and"," ","of Energy Sources" "Characteristic(a)","Total(b)","Electricity(c)","Fuel Oil","Fuel Oil(d)","Natural Gas(e)","NGL(f)","Coal","Breeze","Other(g)","Produced Onsite(h)"

39

NETL: Onsite Research  

NLE Websites -- All DOE Office Websites (Extended Search)

Fundamental Combustion Laboratory Fundamental Combustion Laboratory To help meet a national strategic commitment to clean power generation, NETL is developing a technology base for tomorrow's highly efficient, near-zero-emissions power plants. At NETL, combustion science research is helping to provide the basis for a new generation of advanced fossil fuel conversion technologies that are needed to meet future demands for efficient, clean, and cost-effective energy production. Combustion science researchers are able to study fundamental combustion processes and properties at a laboratory scale, using advanced laser-based systems. Researchers also use a natural gas combustion apparatus that has been adapted to study a variety of fuel types and power systems. Taking this fundamental research the next step, researchers find that, when applied to reciprocating engines, laser-induced spark ignition can achieve leaner air/fuel running conditions by significantly lowering combustion temperatures, which reduces the amount of pollutants produced such as NOx.

40

Green Power Network: On-site Renewable Energy  

NLE Websites -- All DOE Office Websites (Extended Search)

News News TVA Seeks 126 MW of Renewables in 2014 December 2013 More News More News Subscribe to E-Mail Update Subscribe to e-mail update Events EPA Webinar - The Power of Aggregated Purchasing: How to Green Your Electricity Supply & Save Money January 15, 2014 1:00-2:00 p.m. ET Previous Webinars More News Features Green Power Market Status Report (2011 Data) Featured Green Power Reports On-site Renewable Energy Third-Party Solar Financing For consumers or organizations wishing to install on-site renewable energy systems, there are a variety of options available, including electricity generating systems and thermal systems that can displace electricity or fossil fuel use. Solar photovoltaics convert sunlight directly into electricity. Solar hot water systems use the sun's energy to heat water.

Note: This page contains sample records for the topic "adapting onsite electrical" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

On-Site Small Wind Incentive Program | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

On-Site Small Wind Incentive Program On-Site Small Wind Incentive Program On-Site Small Wind Incentive Program < Back Eligibility Agricultural Commercial Fed. Government Industrial Institutional Local Government Nonprofit Residential Schools State Government Savings Category Wind Buying & Making Electricity Maximum Rebate Lesser of $400,000 per site/customer or 50% of installed cost of system Program Info Funding Source RPS surcharge Start Date 01/01/2012 Expiration Date 12/31/2015 State New York Program Type State Rebate Program Rebate Amount First 10,000 kWh of expected annual energy production: $3.50/annual kWh Next 115,000 kWh of expected annual energy production: $1.00/annual kWh Energy production greater than 125,000 kWh: $0.30/annual kWh Provider New York State Energy Research and Development Authority

42

NETL: Onsite Research  

NLE Websites -- All DOE Office Websites (Extended Search)

Laser Spectroscopy Laboratory Laser Spectroscopy Laboratory Laser Spectroscopy Laboratory NETL's Laser Spectroscopy Laboratory uses optical diagnostic techniques to improve combustion processes including those for advanced gas turbine engines. Highly efficient combustion of fossil fuels is essential to achieving clean power generation, a national strategic goal. Since many power plants use gas turbines to generate electricity, the next generation of gas turbines must be capable of satisfying increasingly stringent emissions requirements. In addition, properties of natural gas vary based on geographical location, and fuel supplies may be piped to a facility from a number of locations. Therefore, the engine must be able to compensate for variations in fuel properties that would otherwise cause it to produce excessively high levels of regulated emissions. The use of laser diagnostics is an excellent mechanism to study fluid mechanics and combustion processes in place, while avoiding unwanted disturbances to the system being studied. Researchers seek to isolate particular phenomena that contribute to fluctuations in heat release, by studying combustion flows in simplified systems that are smaller than commercial-sized units but that have similar combustion processes and characteristics.

43

The Onsite Fuel Cell Cogeneration System  

E-Print Network (OSTI)

This paper describes the experiences and results of the major field test of forty-six 40kW onsite fuel cell power plants in the U.S. and Japan through 1985. The field test is a cooperative effort between the Gas Research Institute, gas and electric utility companies, private sector companies, and the U.S. Department of Energy and Department of Defense. The field test is conducted in parallel with technology development efforts sponsored by the Gas Research Institute and the U.S. Department of Energy. Operation of the field test units began in December 1983 with the initial start-up of two units at a racquetball club sponsored by the Southern California Gas Corporation. As of May 1985, over 300,000 hours of operating experience was achieved on the fleet of 40kW units. This experience has demonstrated the onsite fuel cell's superior technical specification, ease of installation, operation and maintenance, and economic benefits over conventional energy service. In addition, this effort identified operating deficiencies in the 40kW units which were either corrected through field retrofits or provided guidance to the parallel technology development efforts.

Woods, R. R.; Cuttica, J. J.; Trimble, K. A.

1986-06-01T23:59:59.000Z

44

Preparing the Way for New Policy Regarding Adaptation of US Electricity Infrastructure to Climate Change  

SciTech Connect

The following pages represent the status of policy regarding adaptation of the electric grid to climate change and proposed directions for new policy development. While strides are being made to understand the current climate and to predict hazards it may present to human systems, both the science and the policy remain at present in an analytical state. The policy proposed in this document involves first continued computational modeling of outcomes which will produce a portfolio of options to be considered in light of specific region-related risks. It is proposed that the modeling continue not only until reasonable policy at various levels of jurisdiction can be derived from its outcome but also on a continuing basis so that as improvements in the understanding of the state and trajectory of climate science along with advancements in technology arise, they can be incorporated into an appropriate and evolving policy.

Allen, Melissa R [ORNL] ORNL

2013-10-01T23:59:59.000Z

45

Modeling the electricity market as a complex adaptive system with an agent-based approach.  

SciTech Connect

As power markets are relatively new and still continue to evolve, there is a growing need for advanced modeling approaches that simulate the behavior of electricity markets over time and how market participants may act and react to the changing economic, financial and regulatory environments in which they operate. A new and rather promising approach is to model the electricity market as a complex adaptive system using an agent-based modeling and simulation (ABMS) approach. The purpose of an ABMS model is not necessarily to predict the outcome of a system but to reveal and understand the complex and aggregate system behaviors that emerge from the interactions of the heterogeneous individual entities. Emergent behavior is a key feature of ABMS and is not easily inferred from the simple sum of the behavior of its components. By relying on both established engineering modeling techniques as well as advanced quantitative economic market principles, the ABMS approach is uniquely suited to addressing the strategic issues of interest to different market participants as well as those of market monitors and regulators.

Koritarov, V.; Decision and Information Sciences

2004-07-01T23:59:59.000Z

46

Materials Science and Engineering Onsite Research  

NLE Websites -- All DOE Office Websites (Extended Search)

Science and Engineering Onsite Research As the lead field center for the DOE Office of Fossil Energy's research and development program, the National Energy Technology Laboratory...

47

Onsite Wastewater Treatment Systems: Liquid Chlorination  

E-Print Network (OSTI)

This publication explains the process, components, legal requirements, factors affecting performance, and maintenance needs of liquid chlorination systems for onsite wastewater treatment.

Weaver, Richard; Lesikar, Bruce J.; Richter, Amanda; O'Neill, Courtney

2008-10-23T23:59:59.000Z

48

Level: National and Regional Data; Row: NAICS Codes; Column: Onsite-Generation Components;  

U.S. Energy Information Administration (EIA) Indexed Site

3 Electricity: Components of Onsite Generation, 2006; 3 Electricity: Components of Onsite Generation, 2006; Level: National and Regional Data; Row: NAICS Codes; Column: Onsite-Generation Components; Unit: Million Kilowatthours. Renewable Energy (excluding Wood NAICS Total Onsite and Code(a) Subsector and Industry Generation Cogeneration(b) Other Biomass)(c) Other(d) Total United States 311 Food 4,563 4,249 * 313 3112 Grain and Oilseed Milling 2,845 2,819 0 27 311221 Wet Corn Milling 2,396 2,370 0 27 31131 Sugar Manufacturing 951 951 0 * 3114 Fruit and Vegetable Preserving and Specialty Foods 268 268 0 * 3115 Dairy Products 44 31 * Q 3116 Animal Slaughtering and Processing 17 0 0 17 312 Beverage and Tobacco Products 659 623 Q * 3121 Beverages 587 551 Q * 3122 Tobacco 72

49

Interconnection Agreements for Onsite Generation  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Interconnection Agreements Interconnection Agreements for Onsite Generation Office of Real Property Asset Management Office of General Counsel Real Property Division Richard R. Butterworth Senior Assistant General Counsel (202) 501-4436 richard.butterworth@gsa.gov The Problem: * Most agreements require indemnity clauses - usually either by tariff or by the submission of standard contracts to PSCs * Federal Government precluded from providing indemnity by: * Anti-deficiency Act - 31 U.S.C. 665(a) * Adequacy of Appropriations Act - 41 U.S.C. 11 GSA - Utility Interconnection Agreements GSA - Utility Interconnection Agreements * Exception: Utility Contracts * GAO decision sets the foundation for exception for utility contracts - 59 Comp. Gen. 705 * But it's a narrow exception

50

Microgrids: distributed on-site generation  

E-Print Network (OSTI)

Microgrids: distributed on-site generation Suleiman Abu-Sharkh, Rachel Li, Tom Markvart, Neil Ross for Climate Change Research Technical Report 22 #12;1 Microgrids: distributed on-site generation Tyndall production by small scale generators in close proximity to the energy users, integrated into microgrids

Watson, Andrew

51

Assessment of On-Site Power Opportunities in the Industrial Sector  

Science Conference Proceedings (OSTI)

The purpose of this report is to identify the potential for on-site power generation in the U.S. industrial sector with emphasis on nine industrial groups called the ''Industries of the Future'' (IOFs) by the U.S. Department of Energy (DOE). Through its Office of Industrial Technologies (OIT), the DOE has teamed with the IOFs to develop collaborative strategies for improving productivity, global competitiveness, energy usage and environmental performance. Total purchases for electricity and steam for the IOFs are in excess of $27 billion annually. Energy-related costs are very significant for these industries. The nine industrial groups are (1) Agriculture (SIC 1); (2) Forest products; (3) Lumber and wood products (SIC 24); (4) Paper and allied products (SIC 26); (5) Mining (SIC 11, 12, 14); (6) Glass (SIC 32); (7) Petroleum (SIC 29); (8) Chemicals (SIC 28); and (9) Metals (SIC 33): Steel, Aluminum, and Metal casting. Although not currently part of the IOF program, the food industry is included in this report because of its close relationship to the agricultural industry and its success with on-site power generation. On-site generation provides an alternative means to reduce energy costs, comply with environmental regulations, and ensure a reliable power supply. On-site generation can ease congestion in the local utility's electric grid. Electric market restructuring is exacerbating the price premium for peak electricity use and for reliability, creating considerable market interest in on-site generation.

Bryson, T.

2001-10-08T23:59:59.000Z

52

"Code(a)","Subsector and Industry","Source(b)","Electricity(c)","Fuel Oil","Fuel Oil(d)","Natural Gas(e)","NGL(f)","Coal","Breeze","Other(g)","Produced Onsite(h)"  

U.S. Energy Information Administration (EIA) Indexed Site

1.4 Relative Standard Errors for Table 1.4;" 1.4 Relative Standard Errors for Table 1.4;" " Unit: Percents." ,,"Any",,,,,,,,,"Shipments" "NAICS",,"Energy","Net","Residual","Distillate",,"LPG and",,"Coke and",,"of Energy Sources" "Code(a)","Subsector and Industry","Source(b)","Electricity(c)","Fuel Oil","Fuel Oil(d)","Natural Gas(e)","NGL(f)","Coal","Breeze","Other(g)","Produced Onsite(h)" ,,"Total United States" 311,"Food",0.4,0.4,19.4,8.9,2,6.9,5.4,0,10.1,9.1 3112," Grain and Oilseed Milling",0,0,21.1,14.7,8.4,13.3,7.9,"X",17.9,9.1

53

Dimensioning and configuration of EES systems for electric vehicles with boundary-conditioned adaptive scalarization  

Science Conference Proceedings (OSTI)

Electric vehicles (EVs) are widely considered as a solution for efficient, sustainable and intelligent transportation. An electrical energy storage (EES) system is the most important component in an EV in terms of performances and cost. This work proposes ...

Wanli Chang; Martin Lukasiewycz; Sebastian Steinhorst; Samarjit Chakraborty

2013-09-01T23:59:59.000Z

54

On-site Housing | Staff Services  

NLE Websites -- All DOE Office Websites (Extended Search)

On-site Housing On-site Housing Note: All guests wishing to stay on-site must be registered and approved in the BNL Guest Information System (GIS). Welcome to Brookhaven National Laboratory. BNL attracts more than 4,500 visiting scientists from all over the world each year to perform scientific research and work with our staff. To support our guests, there are 333 on-site housing units. These units are comprised of 66 family-style apartments, 39 efficiency apartments, 213 dormitory rooms, 13 Guest House rooms, and 2 year round private houses. Location: Hours of Operation: Research Support Building (400A), 20 Brookhaven Avenue Monday - Friday: 8:00 am to Midnight Reservations: (631) 344-2541 or 344-2551 Saturday: Closed* Fax: (631) 344-3098 Sunday: 4:00 pm to Midnight

55

" Onsite Generation from Noncombustible Renewable Energy"...  

U.S. Energy Information Administration (EIA) Indexed Site

" Purchases",2.1 " Transfers In",4.6 " Onsite Generation from Noncombustible Renewable Energy",2.6 " Sales and Transfers Offsite",0.3 "Coke and Breeze",0.6 "Residual Fuel...

56

Regulation, Governance and Adaptation: Governance transformations in the Dutch and French liberalizing electricity industries.  

E-Print Network (OSTI)

??For more than a decade, the European governments have focused their energy policies on creating one European competitive electricity market. Several regulations are introduced into… (more)

Niesten, E.M.M.I.

2009-01-01T23:59:59.000Z

57

Guide to Purchasing Green Power: Renewable Electricity, Renewable...  

NLE Websites -- All DOE Office Websites (Extended Search)

Guide to Purchasing Green Power: Renewable Electricity, Renewable Energy Certificates and On-Site Renewable Generation Title Guide to Purchasing Green Power: Renewable Electricity,...

58

Short Term Electric Load Forecasting Using an Adaptively Trained Layered Perceptron  

E-Print Network (OSTI)

This paper addresses electric load forecasting using artificial Neural Network (NN) technology. The paper summarizes research for Puget Sound Power and Light Company. in this study, several strnctures for NN's are propored and tested. Features extraction is implemented to captug strongly corrclatel variables to electric loads. The NN is compared to several forccting models. Mot of them arc commercial codes. The NN parformed as well as the beat and moat sophisticated commercial forecasting systems.

M. A. EI-Sharkawi; S. Oh; R. J. Marks; M. J. Damborg; C. M. Brace

1991-01-01T23:59:59.000Z

59

Federal Energy Management Program: On-Site Renewable Power Purchase  

NLE Websites -- All DOE Office Websites (Extended Search)

On-Site Renewable On-Site Renewable Power Purchase Agreements to someone by E-mail Share Federal Energy Management Program: On-Site Renewable Power Purchase Agreements on Facebook Tweet about Federal Energy Management Program: On-Site Renewable Power Purchase Agreements on Twitter Bookmark Federal Energy Management Program: On-Site Renewable Power Purchase Agreements on Google Bookmark Federal Energy Management Program: On-Site Renewable Power Purchase Agreements on Delicious Rank Federal Energy Management Program: On-Site Renewable Power Purchase Agreements on Digg Find More places to share Federal Energy Management Program: On-Site Renewable Power Purchase Agreements on AddThis.com... Energy Savings Performance Contracts ENABLE Utility Energy Service Contracts On-Site Renewable Power Purchase Agreements

60

Onsite Wastewater Treatment Systems: Ultraviolet Light Disinfection  

E-Print Network (OSTI)

Some onsite wastewater treatment systems include a disinfection component. This publication explains how homeowners can disinfect wastewater with ultraviolet light, what the components of such a system are, what factors affect the performance of a UV light disinfection system, and how to maintain such a system.

Lesikar, Bruce J.

2008-10-02T23:59:59.000Z

Note: This page contains sample records for the topic "adapting onsite electrical" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Adapting Utility Solar Strategies for a Changing Electricity Landscape: Innovative Business Approaches for Consideration  

Science Conference Proceedings (OSTI)

This report considers the need for “outside-the-box” electric utility strategies that manage future deployment of distributed solar. Business models are discussed that offer potential to technically and financially align with utility interests and inform future planning and program development. For example, benefits and challenges of utility approaches that foster collaboration with third-party solar operators (TPO) are examined. In addition, the merits and technical feasibility of ...

2013-12-20T23:59:59.000Z

62

Optimal selection of on-site generation with combined heat andpower applications  

SciTech Connect

While demand for electricity continues to grow, expansion of the traditional electricity supply system, or macrogrid, is constrained and is unlikely to keep pace with the growing thirst western economies have for electricity. Furthermore, no compelling case has been made that perpetual improvement in the overall power quality and reliability (PQR)delivered is technically possible or economically desirable. An alternative path to providing high PQR for sensitive loads would generate close to them in microgrids, such as the Consortium for Electricity Reliability Technology Solutions (CERTS) Microgrid. Distributed generation would alleviate the pressure for endless improvement in macrogrid PQR and might allow the establishment of a sounder economically based level of universal grid service. Energy conversion from available fuels to electricity close to loads can also provide combined heat and power (CHP) opportunities that can significantly improve the economics of small-scale on-site power generation, especially in hot climates when the waste heat serves absorption cycle cooling equipment that displaces expensive on-peak electricity. An optimization model, the Distributed Energy Resources Customer Adoption Model (DER-CAM), developed at Berkeley Lab identifies the energy bill minimizing combination of on-site generation and heat recovery equipment for sites, given their electricity and heat requirements, the tariffs they face, and a menu of available equipment. DER-CAM is used to conduct a systemic energy analysis of a southern California naval base building and demonstrates atypical current economic on-site power opportunity. Results achieve cost reductions of about 15 percent with DER, depending on the tariff.Furthermore, almost all of the energy is provided on-site, indicating that modest cost savings can be achieved when the microgrid is free to select distributed generation and heat recovery equipment in order to minimize its over all costs.

Siddiqui, Afzal S.; Marnay, Chris; Bailey, Owen; HamachiLaCommare, Kristina

2004-11-30T23:59:59.000Z

63

A Study of Adaptive and Optimizing Behavior for Electric Vehicles Based on Interactive Simulation Games and Revealed Behavior of Electric Vehicle Owners  

E-Print Network (OSTI)

1990. and L. Shipper, Electric Vehicles in a BroaderContext:of The Urban Electric Vehicle conference, Stockholm,the Demand Electric Vehicles. In Transportation Research-

Turrentine, Thomas; Lee-Gosselin, Martin; Kurani, Kenneth; Sperling, Daniel

1992-01-01T23:59:59.000Z

64

Rate Structures for Customers With Onsite Generation: Practice and Innovation  

DOE Green Energy (OSTI)

Recognizing that innovation and good public policy do not always proclaim themselves, Synapse Energy Economics and the Regulatory Assistance Project, under a contract with the California Energy Commission (CEC) and the National Renewable Energy Laboratory (NREL), undertook a survey of state policies on rates for partial-requirements customers with onsite distributed generation. The survey investigated a dozen or so states. These varied in geography and the structures of their electric industries. By reviewing regulatory proceedings, tariffs, publications, and interviews, the researchers identified a number of approaches to standby and associated rates--many promising but some that are perhaps not--that deserve policymakers' attention if they are to promote the deployment of cost-effective DG in their states.

Johnston, L.; Takahashi, K.; Weston, F.; Murray, C.

2005-12-01T23:59:59.000Z

65

U. S. gas market adapting to commoditization; electricity likely to follow similar course  

SciTech Connect

With the final implementation of Federal Energy Regulatory Commission Order 636 in 1994, the US natural gas industry fully entered the third phase of an evolution from regulation to deregulation and, finally, commoditization. Now, the only major segment of the natural gas industry left to fully deregulate is that of local distribution companies behind the city gate with smaller customers. A model for that type of deregulation exists in Canada, where in the Province of Ontario homeowners can choose from whom to buy gas. Other industries, such as long-distance telephone service and airlines, have recently gone through his evolution. The effect of commoditization is similar to that of Order 636, which unbundled the transportation and sales services of US interstate gas transmission pipelines. Commoditization has unbundled the risks inherent to the gas industry. The paper discusses deregulation, increased risks, risk management steps, financial instruments, and electricity deregulation.

Pruner, D. (KCS Energy Risk Management Inc., Edison, NJ (United States))

1995-03-13T23:59:59.000Z

66

On-Site Diesel Generation- How You Can Reduce Your Energy Costs  

E-Print Network (OSTI)

Interruptible power rates, Utility special rate negotiations, and the emergence of a spot electrical power market all can lead to lower industrial energy costs. The installation of low cost on-site diesel powered generation, or the proposed intention to install, provides the means for obtaining lower purchased power costs. The functionality of a standby power system and its inherent value in the coming free market purchase of electrical energy are added benefits. Project feasibility, conceptual design, on-site generation facility requirements, interconnection requirements, and operation and maintenance costs will be examined. Installation costs in the range of $350 to $400 per KW and operating costs of approximately $0.06 to $0.07 per kWhr compared to purchased power rates determine the feasibility of an on-site generation system. In some cases avoided demand charges offer an opportunity for savings such that special rates are not needed for a feasible project. Depending on the manufacturer, low capital cost diesel generators are available in 1000 to 2000 KW blocks. Capacity requirements determine the number of engines required. Large capacity installations are somewhat restricted by voltage and current ratings. Some variants for multiple engine generator installations will yield greater reliability or lower costs depending on objectives. Specific requirements for basic building blocks of an on-site generation system will be examined as well as an example of a 5,500 KW installation. IEA provides an alternative to installing and operating an on-site generation system. IEA owns and operates diesel standby generation systems for customers, with responsibility for all maintenance and operation as well as associated costs. This allows customers to focus on core business, not the generation of electrical energy.

Charles, D.

1996-04-01T23:59:59.000Z

67

Technical Conference on the Criteria for Designation of NIETCs: On-Site Final Attendee List  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

ON-SITE FINAL ATTENDEE LIST ON-SITE FINAL ATTENDEE LIST Poonum Agrawal U.S. Department of Energy Email: poonum.agrawal@hq.doe.gov Parveen Baig Iowa Utilities Board Email: parveen.baig@iub.state.ia.us Derek Bandera Reliant Energy, Inc. Email: dbandera@reliant.com Diane Barney New York Dept. of Public Service Email: diane_barney@dps.state.ny.us Joel Bearden Cargill Power Markets, LLC Email: joel_bearden@cargill.com Michael Bednarz US Department of Energy - Midwest Regional Office Email: michael.bednarz@ee.doe.gov Mark Bennett Electric Power Supply Association Email: mbennett@epsa.org Bradley Bentley Sempra Energy Utility Email: bbentley@semprautilities.com Heather Bergman The Keystone Center Email: hbergman@keystone.org Ricky Bittle Arkansas Electric Cooperative

68

Energy Storage for Advanced Electric Vehicles - Programmaster.org  

Science Conference Proceedings (OSTI)

Presentation Title, Energy Storage for Advanced Electric Vehicles. Author(s), Christopher Johnson, David Howell. On-Site Speaker (Planned), Christopher ...

69

Federal Energy Management Program: On-Site Renewable Power Purchase  

NLE Websites -- All DOE Office Websites (Extended Search)

On-Site Renewable Power Purchase Agreements On-Site Renewable Power Purchase Agreements Graphic of the eTraining logo Training Available Federal On-Site Renewable Power Purchase Agreements: Learn how to develop an on-site renewable Power Purchase Agreement (PPA) by taking this FEMP eTraining course. At a Glance Power purchase agreements feature a variety of benefits and considerations for Federal agencies, including: Benefits: No up-front capital costs Ability to monetize tax incentives Typically a known, long-term energy price No operations and maintenance responsibilities Minimal risk to the agency Considerations: Federal sector experience with PPAs is still growing Contract term limitations Inherent transaction costs Challenges with site access contracts and concerns On-site renewable power purchase agreements (PPAs) allow Federal agencies to fund on-site renewable energy projects with no up-front capital costs incurred.

70

A Study of Adaptive and Optimizing Behavior for Electric Vehicles Based on Interactive Simulation Games and Revealed Behavior of Electric Vehicle Owners  

E-Print Network (OSTI)

Incentives and Acceptance Electric, Hybridand Other Alternative of Vehicles, Report for United States Department Energy,

Turrentine, Thomas; Lee-Gosselin, Martin; Kurani, Kenneth; Sperling, Daniel

1992-01-01T23:59:59.000Z

71

A business case for on-site generation: The BD biosciences pharmingen project  

SciTech Connect

Deregulation is haltingly changing the United States electricity markets. The resulting uncertainty and/or rising energy costs can be hedged by generating electricity on-site and other benefits, such as use of otherwise wasted heat, can be captured. The Public Utility Regulatory Policy Act (PURPA) of 1978 first invited relatively small-scale generators ({ge} 1 MW) into the electricity market. The advent of efficient and reliable small scale and renewable equipment has spurred an industry that has, in recent years, made even smaller (business scale) electricity generation an economically viable option for some consumers. On-site energy capture and/or conversion, known as distributed energy resources (DER), offers consumers many benefits, such as economic savings and price predictability, improved reliability, control over power quality, and emissions reductions. Despite these benefits, DER adoption can be a daunting move to a customer accustomed to simply paying a monthly utility bill. San Diego is in many ways an attractive location for DER development: It has high electricity prices typical of California and a moderate climate i.e. energy loads are consistent throughout the year. Additionally, the price shock to San Diego Gas and Electric (SDG&E) customers during the summer of 2000 has interested many in alternatives to electricity price vulnerability. This report examines the business case for DER at the San Diego biotechnology supply company, BD Biosciences Pharmingen, which considered DER for a building with 200-300 kW base-load, much of which accommodates the refrigerators required to maintain chemicals. Because of the Mediterranean climate of the San Diego area and the high rate of air changes required due to on-site use of chemicals, modest space heating is required throughout the year. Employees work in the building during normal weekday business hours, and daily peak loads are typically about 500 kW.

Firestone, Ryan; Creighton, Charles; Bailey, Owen; Marnay, Chris; Stadler, Michael

2003-09-01T23:59:59.000Z

72

Electric  

U.S. Energy Information Administration (EIA)

Average Retail Price of Electricity to ... Period Residential Commercial Industrial ... or usage falling within specified limits by rate ...

73

On-Site Renewable Power Purchase Agreements | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Project Funding » On-Site Renewable Power Purchase Agreements Project Funding » On-Site Renewable Power Purchase Agreements On-Site Renewable Power Purchase Agreements October 7, 2013 - 3:35pm Addthis On-site renewable power purchase agreements (PPAs) allow Federal agencies to fund on-site renewable energy projects with no up-front capital costs incurred. With a PPA, a developer installs a renewable energy system on agency property under an agreement that the agency will purchase the power generated by the system. The agency pays for the system through these power payments over the life of the contract. After installation, the developer owns, operates, and maintains the system for the life of the contract. For more information, read the Federal Energy Mangement Program's (FEMP) introductory guide to PPAs and sample documents.

74

Sample Documents for On-Site Renewable Power Purchase Agreements |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Funding » On-Site Renewable Power Purchase Agreements » Funding » On-Site Renewable Power Purchase Agreements » Sample Documents for On-Site Renewable Power Purchase Agreements Sample Documents for On-Site Renewable Power Purchase Agreements October 7, 2013 - 3:37pm Addthis The Federal Energy Management Program (FEMP) works with Federal agencies and partners to assemble sample documents from past on-site renewable power purchase agreement (PPA) projects to help streamline the PPA process. Requests for Proposal and Contracts Sample documents are available for the following requests for proposal: Photovoltaics at the Department of Energy's (DOE) Princeton Plasma Physics Laboratory: PPA request for proposal issued by DLA Energy on behalf of Princeton Plasma Physics Laboratory. National Renewable Energy Laboratory (NREL) Photovoltaics Opportunity

75

On-Site Renewable Power Purchase Agreements | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

On-Site Renewable Power Purchase Agreements On-Site Renewable Power Purchase Agreements On-Site Renewable Power Purchase Agreements October 16, 2013 - 5:09pm Addthis An on-site renewable power purchase agreement (PPA) enables Federal agencies to fund a renewable energy project by contracting to purchase the power generated by the system. The renewable energy equipment is installed and owned by a developer but located on-site at the agency facility. As noted in the renewable energy project funding overview, PPAs provide a range of attractive benefits to Federal agencies trying to access renewable energy. These include no up-front capital costs; the ability to monetize tax incentives; typically a known, long-term energy price; no operations and maintenance (O&M) responsibilities; and minimal risk to the agency.

76

Residential Energy Management system for optimization of on-site generation  

NLE Websites -- All DOE Office Websites (Extended Search)

Residential Energy Management system for optimization of on-site generation Residential Energy Management system for optimization of on-site generation with HVAC Speaker(s): Ram Narayanamurthy Date: October 29, 2009 - 12:00pm Location: 90-3122 As the individual movements towards Net Zero Energy Homes (NZEH) and the SmartGrid converge on residential buildings, three major challenges need to be addressed: Flatten the highly peaked electric load profile of low energy homes Provide easy integration of energy efficiency into existing homes Provide builders and consumers with visibility into building operation, and ease of management. A Home Energy Management System (HEMS) owned by the consumer, capable of two way communications with Utility DR/SmartGrid/AMI is required to resolve these challenges. The HEMS will need to increase energy efficiency of building operations, provide consumers feedback and

77

ENERGY STAR Using On-site Renewable Energy as the Next Step to Improving Energy Performance and Reducing Emissions  

NLE Websites -- All DOE Office Websites (Extended Search)

ON-SITE RENEWABLE ENERGY AS THE NEXT STEP ON-SITE RENEWABLE ENERGY AS THE NEXT STEP TO IMPROVING ENERGY PERFORMANCE AND REDUCING EMISSIONS jcpenney has a corporate energy management strategy that includes using energy efficient technologies in its stores and encouraging energy conservation. As part of this strategy, the company also investigated generating electricity through on-site renewable energy. jcpenney is a partner in the U.S. Environmental Protection Agency (EPA) ENERGY STAR Commercial Buildings Program, and has been tracking building energy use since 2006 using EPA's free benchmarking tool, Portfolio Manager. Portfolio Manager provides a 1-100 energy performance score similar to a "miles-per-gallon" metric for vehicle fuel efficiency. Those buildings that achieve an ENERGY STAR score

78

Electricity  

Energy.gov (U.S. Department of Energy (DOE))

Electricity is an essential part of modern life. The Energy Department is working to create technology solutions that will reduce our energy use and save Americans money.

79

UTILITY INVESTMENT IN ON-SITE SOLAR: RISK AND RETURN ANALYSIS FOR CAPITALIZATION AND FINANCING  

E-Print Network (OSTI)

of S for On-Site Solar Heating -iv- List of Figures Fig. 1.penetration of on-site solar heating and cooling systems.investment in on-site solar heating cannot easily quantify

Kahn, E.

2011-01-01T23:59:59.000Z

80

Case Studies of Onsite Energy Systems for Healthcare Facilities  

E-Print Network (OSTI)

This paper will present two case studies of municipal utility owned and operated combined heat and power (CHP) systems. The first of these two systems is located at a new hospital development in Austin, TX, the Dell Children’s Medical Center of Central Texas. Combining the high efficiency, low emission, 4.6 MW Solar Turbines Mercury-50 combustion turbine, a 1000 Ton Trane steam absorption chiller and an 8000 Ton-hr Thermal Energy Storage tank, this onsite energy system is designed to achieve operating efficiencies in excess of 70%, while allowing the hospital to be fully operational under grid-independent scenarios. The second system is located at a new hospital development in Gainesville, FL, the Shands Cancer Hospital Campus. Similar to the Dell project, GRU’s system will serve all of the hospital’s electric and thermal loads, will be interconnected with the local grid, and will allow the hospital to be fully operational under grid-independent scenarios.

Schwass, R.

2008-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "adapting onsite electrical" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Black Hills Energy - On-Site Solar PV Rebate Program | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

- On-Site Solar PV Rebate Program Black Hills Energy - On-Site Solar PV Rebate Program Eligibility Commercial Fed. Government General PublicConsumer Industrial Local Government...

82

Onsite Distributed Generation Systems For Laboratories, Laboratories for the 21st Century: Best Practices (Brochure)  

DOE Green Energy (OSTI)

This guide provides general information on implementing onsite distributed generation systems in laboratory environments. Specific technology applications, general performance information, and cost data are provided to educate and encourage laboratory energy managers to consider onsite power generation or combined heat and power (CHP) systems for their facilities. After conducting an initial screening, energy managers are encouraged to conduct a detailed feasibility study with actual cost and performance data for technologies that look promising. Onsite distributed generation systems are small, modular, decentralized, grid-connected, or off-grid energy systems. These systems are located at or near the place where the energy is used. These systems are also known as distributed energy or distributed power systems. DG technologies are generally considered those that produce less than 20 megawatts (MW) of power. A number of technologies can be applied as effective onsite DG systems, including: (1) Diesel, natural gas, and dual-fuel reciprocating engines; (2) Combustion turbines and steam turbines; (3) Fuel cells; (4) Biomass heating; (5) Biomass combined heat and power; (6) Photovoltaics; and (7) Wind turbines. These systems can provide a number of potential benefits to an individual laboratory facility or campus, including: (1) High-quality, reliable, and potentially dispatchable power; (2) Low-cost energy and long-term utility cost assurance, especially where electricity and/or fuel costs are high; (3) Significantly reduced greenhouse gas (GHG) emissions. Typical CHP plants reduce onsite GHG by 40 to 60 percent; (4) Peak demand shaving where demand costs are high; (5) CHP where thermal energy can be used in addition to electricity; (6) The ability to meet standby power needs, especially where utility-supplied power is interrupted frequently or for long periods and where standby power is required for safety or emergencies; and (7) Use for standalone or off-grid systems where extending the grid is too expensive or impractical. Because they are installed close to the load, DG systems avoid some of the disadvantages of large, central power plants, such as transmission and distribution losses over long electric lines.

Not Available

2011-09-01T23:59:59.000Z

83

On-Site Disposal Facility Inspection Report  

Office of Legacy Management (LM)

8947.1 8947.1 09/13 On-Site Disposal Facility Inspection Report September 2013 6319-D6242 8947.2 09/13 East Face Cell 1 West Face Cell 1 6319D-6208 6319D-6231 8947.3 09/13 North Face Cell 1 North Drainage (looking west) 6319D-6206 6319D-6205 8947.4 09/13 East Face Cell 2 West Face Cell 2 6319D-6230 6319D-6209 8947.5 09/13 East Face Cell 3 West Face Cell 3 6319D-6229 6319D-6210 8947.6 09/13 East Face Cell 4 West Face Cell 4 6319D-6227 6319D-62111 8947.7 09/13 East Face Cell 5 West Face Cell 5 6319D-6226 6319D-6213 8947.8 09/13 East Face Cell 6 6319D-6214 6319D-6225 West Face Cell 6 8947.9 09/13 East Face Cell 7 6319D-6215 6319D-6223 West Face Cell 7 8947.10 09/13 East Face Cell 8 6319D-6217 6319D-6220 West Face Cell 8 8947.11 09/13 South Face Cell 8 6319D-6219 6319D-6218 South Drainage (looking west) 8947.12 09/13

84

On-site cogeneration for office buildings  

SciTech Connect

The purpose of this project was to investigate the feasibility of alternative means of enhancing the economic attractiveness of cogeneration for use in office buildings. One course of action designed to achieve this end involves directing the exhaust heat of a cogeneration unit through an absorption chiller to produce cooling energy. Thus, the units could be operated more continuously, particularly if thermal storage is incorporated. A second course of action for improving the economics of cogeneration in office buildings involves the sale of the excess cogenerated waste heat. A potential market for this waste heat is a district heating grid, prevalent in the downtown sections of most urban areas in the US. This project defines a realistic means to guide the integration of cogeneration and district heating. The approach adopted to achieve this end involved researching the issues surrounding the integration of on-site cogeneration in downtown commercial office buildings, and performing an energy and economic feasibility analysis for a representative building. The technical, economic and legal issues involved in this type of application were identified and addressed. The research was also intended as a first step toward implementing a pilot project to demonstrate the feasibility of office building cogeneration in San Francisco. 13 refs., 7 figs., 4 tabs.

Not Available

1985-04-01T23:59:59.000Z

85

Residential Energy Management system for optimization of on-site...  

NLE Websites -- All DOE Office Websites (Extended Search)

Residential Energy Management system for optimization of on-site generation with HVAC Speaker(s): Ram Narayanamurthy Date: October 29, 2009 - 12:00pm Location: 90-3122 As the...

86

Field-portable mass spectrometers for onsite analytics: What's next?  

Science Conference Proceedings (OSTI)

The need for rapid, onsite chemical analyses is as apparent as it has ever been, especially for compounds detrimental to health or to the environment, such as toxic industrial species, explosives, chemical warfare agents, and environmental toxins. Field-po

87

Industrial onsite generation increasingly relies on natural ...  

U.S. Energy Information Administration (EIA)

Or a factory can use thermal technologies to provide both process heat and electric power at a CHP facility at a higher ... other fuels can be used in either type.

88

ELECTRIC  

Office of Legacy Management (LM)

ELECTRIC cdrtrokArJclaeT 3 I+ &i, y I &OF I*- j< t j,fci..- ir )(yiT E-li, ( -,v? Cl -p4.4 RESEARCH LABORATORIES EAST PITTSBURGH, PA. 8ay 22, 1947 Mr. J. Carrel Vrilson...

89

Customer adoption of small-scale on-site power generation  

Science Conference Proceedings (OSTI)

The electricity supply system is undergoing major regulatory and technological change with significant implications for the way in which the sector will operate (including its patterns of carbon emissions) and for the policies required to ensure socially and environmentally desirable outcomes. One such change stems from the rapid emergence of viable small-scale (i.e., smaller than 500 kW) generators that are potentially competitive with grid delivered electricity, especially in combined heat and power configurations. Such distributed energy resources (DER) may be grouped together with loads in microgrids. These clusters could operate semi-autonomously from the established power system, or macrogrid, matching power quality and reliability more closely to local end-use requirements. In order to establish a capability for analyzing the effect that microgrids may have on typical commercial customers, such as office buildings, restaurants, shopping malls, and grocery stores, an economic mod el of DER adoption is being developed at Berkeley Lab. This model endeavors to indicate the optimal quantity and type of small on-site generation technologies that customers could employ given their electricity requirements. For various regulatory schemes and general economic conditions, this analysis produces a simple operating schedule for any installed generators. Early results suggest that many commercial customers can benefit economically from on-site generation, even without considering potential combined heat and power and reliability benefits, even though they are unlikely to disconnect from the established power system.

Siddiqui, Afzal S.; Marnay, Chris; Hamachi, Kristina S.; Rubio, F. Javier

2001-04-01T23:59:59.000Z

90

ELECTRIC  

Office of Legacy Management (LM)

ELECTRIC ELECTRIC cdrtrokArJclaeT 3 I+ &i, y$ \I &OF I*- j< t j,fci..- ir )(yiT !E-li, ( \-,v? Cl -p/4.4 RESEARCH LABORATORIES EAST PITTSBURGH, PA. 8ay 22, 1947 Mr. J. Carrel Vrilson General ?!!mager Atomic Qxzgy Commission 1901 Constitution Avenue Kashington, D. C. Dear Sir: In the course of OUT nuclenr research we are planning to study the enc:ri;y threshold anti cross section for fission. For thib program we require a s<>piAroted sample of metallic Uranium 258 of high purity. A quantity of at lezst 5 grams would probably be sufficient for our purpose, and this was included in our 3@icntion for license to the Atonic Energy Coskqission.. This license has been approved, 2nd rre would Llp!Jreciate informztion as to how to ?r*oceed to obtain thit: m2teria.l.

91

Modeling On-Site Utility Systems Using "APLUS"  

E-Print Network (OSTI)

Most energy saving schemes on industrial sites lead to reductions in the steam and/or power demands on an on-site utility system. Accurate knowledge of the marginal and incremental costs of the available levels of steam and shaft power from such systems is, therefore, essential for the correct economic evaluation of proposed retrofit schemes. Knowledge of marginal costs is also essential for continuous optimal operation of on-site utility systems. "APLUS" is an IBM-PC based software package developed for evaluation of marginal and incremental costs of on-site utilities. "APLUS" allows the user to configure steam/power systems using sets of predefined icons. Once a flowsheet has been configured, the program can be used to solve the heat and mass balance and to generate accurate marginal costs. An overview of the package and examples illustrating its applications are presented in this paper.

Ranade, S. M.; Jones, D. H.; Shrec, S. C.

1988-09-01T23:59:59.000Z

92

Intruder dose pathway analysis for the onsite disposal of radioactive wastes: The ONSITE/MAXI1 computer program  

Science Conference Proceedings (OSTI)

This document summarizes initial efforts to develop human-intrusion scenarios and a modified version of the MAXI computer program for potential use by the NRC in reviewing applications for onsite radioactive waste disposal. Supplement 1 of NUREG/CR-3620 (1986) summarized modifications and improvements to the ONSITE/MAXI1 software package. This document summarizes a modified version of the ONSITE/MAXI1 computer program. This modified version of the computer program operates on a personal computer and permits the user to optionally select radiation dose conversion factors published by the International Commission on Radiological Protection (ICRP) in their Publication No. 30 (ICRP 1979-1982) in place of those published by the ICRP in their Publication No. 2 (ICRP 1959) (as implemented in the previous versions of the ONSITE/MAXI1 computer program). The pathway-to-human models used in the computer program have not been changed from those described previously. Computer listings of the ONSITE/MAXI1 computer program and supporting data bases are included in the appendices of this document.

Kennedy, W.E. Jr.; Peloquin, R.A.; Napier, B.A.; Neuder, S.M.

1987-02-01T23:59:59.000Z

93

Onsite Wastewater Treatment Systems: Homeowner's Guide to Evaluating Service Contracts  

E-Print Network (OSTI)

This guide helps homeowners who are seeking maintenance services for their onsite wastewater treatment systems (such as septic systems). Included are definitions of common terms used in service contracts, types of service contracts available, and factors to consider when choosing a service provider.

Lesikar, Bruce J.; O'Neill, Courtney; Deal, Nancy; Loomis, George; Gustafson, David; Lindbo, David

2008-10-23T23:59:59.000Z

94

Rapid gravity and gravity gradiometry terrain correction via adaptive quadtree mesh discretization Kristofer Davis, M. Andy Kass, and Yaoguo Li, Center for Gravity, Electrical and Magnetic Studies, Colorado School  

E-Print Network (OSTI)

Rapid gravity and gravity gradiometry terrain correction via adaptive quadtree mesh discretization Kristofer Davis, M. Andy Kass, and Yaoguo Li, Center for Gravity, Electrical and Magnetic Studies, Colorado School of Mines SUMMARY We present a method for modeling the terrain response in gravity and gravity

95

GRR/Elements/18-CA-b.2 - Onsite Treatment Process | Open Energy...  

Open Energy Info (EERE)

2 - Onsite Treatment Process < GRR | Elements Jump to: navigation, search Retrieved from "http:en.openei.orgwindex.php?titleGRRElements18-CA-b.2-OnsiteTreatmentProces...

96

An accurate system for onsite calibration of electronic transformers with digital output  

Science Conference Proceedings (OSTI)

Calibration systems with digital output are used to replace conventional calibration systems because of principle diversity and characteristics of digital output of electronic transformers. But precision and unpredictable stability limit their onsite application even development. So fully considering the factors influencing accuracy of calibration system and employing simple but reliable structure, an all-digital calibration system with digital output is proposed in this paper. In complicated calibration environments, precision and dynamic range are guaranteed by A/D converter with 24-bit resolution, synchronization error limit is nanosecond by using the novelty synchronization method. In addition, an error correction algorithm based on the differential method by using two-order Hanning convolution window has good inhibition of frequency fluctuation and inter-harmonics interference. To verify the effectiveness, error calibration was carried out in the State Grid Electric Power Research Institute of China and results show that the proposed system can reach the precision class up to 0.05. Actual onsite calibration shows that the system has high accuracy, and is easy to operate with satisfactory stability.

Zhi Zhang; Li Hongbin [CEEE of HuaZhong University of Science and Technology, Wuhan 430074 (China); State Key Laboratory of Advanced Electromagnetic Engineering and Technology, Wuhan 430074 (China)

2012-06-15T23:59:59.000Z

97

Interim On-Site Storage of Low Level Waste: Volume 1: Licensing and Regulatory Issues  

Science Conference Proceedings (OSTI)

This report is an all-inclusive resource guide for evaluating a utility's on-site storage licensing requirements. Specifically, the report offers an extensive review of licensing and regulatory documents related to on-site storage of low level waste as well as a methodology for evaluating on-site storage licensing issues.

1992-06-01T23:59:59.000Z

98

ECONOMICS OF ON-SITE WASTE GASIFICATION ALFRED C. W. EGGEN  

E-Print Network (OSTI)

procedure for estimating costs for industrial, on-site, waste gasification processes. However, gen eralizingECONOMICS OF ON-SITE WASTE GASIFICATION ALFRED C. W. EGGEN K. T. Lear Associates. Inc. Manchester, Charles R Velzy Associates, Inc., Elmsford, N.Y. On-site waste gasification may well be an at tractive

Columbia University

99

Federal On-Site Renewable Power Purchasing Issues  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

On-Site Renewable On-Site Renewable Power Purchasing Issues Tracy Logan, FEMP (202) 586-9973 tracy.logan@ee.doe.gov Chandra Shah, NREL (303) 384-7557 chandra.shah@nrel.gov Overview * OMB Memo Summary * Issue Paper Development * Termination * ESPC PPA Update CEQ/OMB Memo Summary * 8/16/11: Supporting Energy and Sustainability Goal Achievement Through Efficiency and Deployment of Clean Energy Technology * Encourages Agencies to use ESPCs and UESCs and requests Agencies report ESPCs and UESCs to FEMP * Requests review of all types of PPAs Issue Paper Development * FEMP is drafting papers on deployment issues * Purpose: to provide a central point of information * Proposed papers: interconnection, rebates & incentives, termination, others? * Please email suggested topics to Tracy & Chandra

100

On-site Housing Unit Types | Staff Services  

NLE Websites -- All DOE Office Websites (Extended Search)

On-site Housing Unit Types On-site Housing Unit Types Registration is required for all computers, wireless notebooks or other network devices used on the BNL Network. Devices that are not registered will be disconnected from the network. Apartments Apartments are available in 1, 2, 3 and 4 bedrooms. They are fully furnished and supplied with linens, kitchen utensils and cookware. Utilities are included in the rental price. *Note: These units do NOT have air conditioning. Each unit is equipped with DSL connection, satellite television and a microwave. Cisco Wireless Access Points (WAPs) connections are also available in Buildings 2-10. More Photos (PDF) Cavendish House The Cavendish house is a male dormitory consisting of 83 private single occupancy rooms equipped with air conditioning, Ethernet connection and

Note: This page contains sample records for the topic "adapting onsite electrical" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Safety evaluation for packaging (onsite) nitrogen trailers propane tanks  

SciTech Connect

The purpose of the Safety Evaluation for Packaging (SEP) is the evaluation and authorization of the onsite transport of propane tanks that are mounted on the Lockheed Martin Hanford Corporation Characterization Project`s nitrogen trailers. This SEP authorizes onsite transport of the nitrogen trailers, including the propane tanks, until May 31, 1998. The three nitrogen trailers (HO-64-4966, HO-64-4968, and HO-64-5170) are rated for 1,361 kg (30,000 lb) and are equipped with tandem axles and pintel hitches. Permanently mounted on each trailer is a 5,678 L (1,500 gal) cryogenic dewar that is filled with nitrogen, and a propane fired water bath vaporizer system, and a 454 L (1 20 gal) propane tank. The nitrogen trailer system is operated only when it is disconnected from the tow vehicle and is leveled and stabilized. When the trailers are transported, the propane tanks are isolated via closed supply valves.

Ferrell, P.C.

1998-01-28T23:59:59.000Z

102

ONSITE TRANSPORTATION AUTHORIZATION CHALLENGES AT THE SAVANNAH RIVER SITE  

SciTech Connect

Prior to 2008, transfers of radioactive material within the Savannah River Site (SRS) boundary, referred to as onsite transfers, were authorized by Transportation Safety Basis (TSB) documents that only required approval by the SRS contractor. This practice was in accordance with the existing SRS Transportation Safety Document (TSD). In 2008 the Department of Energy Savannah River Field Office (DOE-SR) requested that the SRS TSD be revised to require DOE-SR approval of all Transportation Safety Basis (TSB) documents. As a result, the primary SRS contractor embarked on a multi-year campaign to consolidate old or generate new TSB documents and obtain DOE-SR approval for each. This paper focuses on the challenges incurred during the rewriting or writing of and obtaining DOE-SR approval of all Savannah River Site Onsite Transportation Safety Basis documents.

Watkins, R.; Loftin, B.; Hoang, D.; Maxted, M.

2012-05-30T23:59:59.000Z

103

" Row: NAICS Codes; Column: Electricity Components;"  

U.S. Energy Information Administration (EIA) Indexed Site

1 Electricity: Components of Net Demand, 2002;" 1 Electricity: Components of Net Demand, 2002;" " Level: National and Regional Data; " " Row: NAICS Codes; Column: Electricity Components;" " Unit: Million Kilowatthours." " "," ",,,,,," " " "," ",,,"Total ","Sales and","Net Demand","RSE" "NAICS"," ",,"Transfers ","Onsite","Transfers","for","Row" "Code(a)","Subsector and Industry","Purchases"," In(b)","Generation(c)","Offsite","Electricity(d)","Factors" ,,"Total United States"

104

" Row: NAICS Codes; Column: Electricity Components;"  

U.S. Energy Information Administration (EIA) Indexed Site

1. Electricity: Components of Net Demand, 1998;" 1. Electricity: Components of Net Demand, 1998;" " Level: National and Regional Data; " " Row: NAICS Codes; Column: Electricity Components;" " Unit: Million Kilowatthours." " "," ",,,,,," " " "," ",,,,"Sales and","Net Demand","RSE" "NAICS"," ",,,"Total Onsite","Transfers","for","Row" "Code(a)","Subsector and Industry","Purchases","Transfers In(b)","Generation(c)","Offsite","Electricity(d)","Factors" ,,"Total United States"

105

Safety analysis report for packaging (onsite) steel drum  

SciTech Connect

This Safety Analysis Report for Packaging (SARP) provides the analyses and evaluations necessary to demonstrate that the steel drum packaging system meets the transportation safety requirements of HNF-PRO-154, Responsibilities and Procedures for all Hazardous Material Shipments, for an onsite packaging containing Type B quantities of solid and liquid radioactive materials. The basic component of the steel drum packaging system is the 208 L (55-gal) steel drum.

McCormick, W.A.

1998-09-29T23:59:59.000Z

106

Safety analysis report for packaging (onsite) sample pig transport system  

Science Conference Proceedings (OSTI)

This Safety Analysis Report for Packaging (SARP) provides a technical evaluation of the Sample Pig Transport System as compared to the requirements of the U.S. Department of Energy, Richland Operations Office (RL) Order 5480.1, Change 1, Chapter III. The evaluation concludes that the package is acceptable for the onsite transport of Type B, fissile excepted radioactive materials when used in accordance with this document.

MCCOY, J.C.

1999-03-16T23:59:59.000Z

107

Combining Energy Efficiency Building Retrofits and Onsite Generation: An  

NLE Websites -- All DOE Office Websites (Extended Search)

Combining Energy Efficiency Building Retrofits and Onsite Generation: An Combining Energy Efficiency Building Retrofits and Onsite Generation: An Emerging Business Model from the ESCO Industry Title Combining Energy Efficiency Building Retrofits and Onsite Generation: An Emerging Business Model from the ESCO Industry Publication Type Conference Paper Year of Publication 2011 Authors Satchwell, Andrew, Peter H. Larsen, and Charles A. Goldman Conference Name 2011 ACEEE Summer Study on Energy Efficiency in Industry Date Published 2011 Publisher ACEEE Conference Location Niagara Falls, New York Abstract The U.S. energy service company (ESCO) industry is an example of a private-sector business model where energy efficiency savings are delivered to customers primarily through the use of performance-based contracts. Despite the onset of a severe economic recession, we estimate that the U.S. ESCO industry grew about 7% per year from 2006 to 2008 with annual revenues of about $4.1 billion in 2008. About 75% of industry revenues are directly related to the installation of energy efficiency measures at existing buildings in the institutional, commercial, and industrial sectors.

108

Federal Energy Management Program: Sample Documents for On-Site Renewable  

NLE Websites -- All DOE Office Websites (Extended Search)

Sample Documents Sample Documents for On-Site Renewable Power Purchase Agreements to someone by E-mail Share Federal Energy Management Program: Sample Documents for On-Site Renewable Power Purchase Agreements on Facebook Tweet about Federal Energy Management Program: Sample Documents for On-Site Renewable Power Purchase Agreements on Twitter Bookmark Federal Energy Management Program: Sample Documents for On-Site Renewable Power Purchase Agreements on Google Bookmark Federal Energy Management Program: Sample Documents for On-Site Renewable Power Purchase Agreements on Delicious Rank Federal Energy Management Program: Sample Documents for On-Site Renewable Power Purchase Agreements on Digg Find More places to share Federal Energy Management Program: Sample Documents for On-Site Renewable Power Purchase Agreements on AddThis.com...

109

On-site worker-risk calculations using MACCS  

Science Conference Proceedings (OSTI)

We have revised the latest version of MACCS for use with the calculation of doses and health risks to on-site workers for postulated accidents at the Rocky Flats Plant (RFP) in Colorado. The modifications fall into two areas: (1) an improved estimate of shielding offered by buildings to workers that remain indoors; and, (2) an improved treatment of building-wake effects, which affects both indoor and outdoor workers. Because the postulated accident can be anywhere on plant site, user-friendly software has been developed to create those portions of the (revised) MACCS input data files that are specific to the accident site.

Peterson, V.L.

1993-05-01T23:59:59.000Z

110

On-site generated nitrogen cuts cost of underbalanced drilling  

Science Conference Proceedings (OSTI)

The use of on-site generated nitrogen, instead of liquid nitrogen, has reduced the cost of drilling underbalanced horizontal wells in Canada and the western US. Because nitrogen is inert and inflammable, it is the preferred gas for underbalanced drilling. Nitrogen can be supplied for oil field use by three different methods: cryogenic liquid separation, pressure swing adsorption, and hollow fiber membranes. The selection of nitrogen supply from one of these methods depends on the cost of delivered nitrogen, the required flow rates and pressure, the required nitrogen purity, and the availability and reliability of the equipment for nitrogen generation. These three methods are described, as well as the required equipment.

Downey, R.A. [Energy Ingenuity Co., Englewood, CO (United States)

1997-02-24T23:59:59.000Z

111

Electricity Consumption Electricity Consumption EIA Electricity Consumption Estimates  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Consumption Consumption Electricity Consumption EIA Electricity Consumption Estimates (million kWh) National Petroleum Council Assumption: The definition of electricity con- sumption and sales used in the NPC 1999 study is the equivalent ofwhat EIA calls "sales by utilities" plus "retail wheeling by power marketers." This A nn u al Gro wth total could also be called "sales through the distribution grid," 2o 99 99 to Sales by Utilities -012% #N/A Two other categories of electricity consumption tracked by EIA cover on site Retail Wheeling Sales by generation for host use. The first, "nonutility onsite direct use," covers the Power Marketen 212.25% #N/A traditional generation/cogeneration facilities owned by industrial or large All Sales Through Distribution

112

NETL: Mercury Emissions Control Technologies - On-Site Production of  

NLE Websites -- All DOE Office Websites (Extended Search)

On-Site Production of Mercury Sorbent with Low Concrete Impact On-Site Production of Mercury Sorbent with Low Concrete Impact The detrimental health effects of mercury are well documented. Furthermore, it has been reported that U.S. coal-fired plants emit approximately 48 tons of mercury a year. To remedy this, the U.S. Environmental Protection Agency (EPA) released the Clean Air Mercury Rule (CAMR) on March 15, 2005. A promising method to achieve the mandated mercury reductions is activated carbon injection (ACI). While promising, the current cost of ACI for mercury capture is expensive, and ACI adversely impacts the use of the by-product fly-ash for concrete. Published prices for activated carbon are generally 0.5-1 $/lb and capital costs estimates are 2-55 $/KW. Because of the high costs of ACI, Praxair started feasibility studies on an alternative process to reduce the cost of mercury capture. The proposed process is composed of three steps. First, a hot oxidant mixture is created by using a proprietary Praxair burner. Next, the hot oxidant is allowed to react with pulverized coal and additives. The resulting sorbent product is separated from the resulting syngas. In a commercial installation, the resulting sorbent product would be injected between the air-preheater and the particulate control device.

113

Optimal selection of on-site generation with combined heat and power applications  

E-Print Network (OSTI)

the burning of natural gas for on-site power generation andnatural gas absorption chiller GenL i , m , t , h , u Generated power by distributed generation

Siddiqui, Afzal S.; Marnay, Chris; Bailey, Owen; Hamachi LaCommare, Kristina

2004-01-01T23:59:59.000Z

114

Proposed On-Site Waste Disposal Facility (OSWDF) at the Portsmouth...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

2008 ETR-12 United States Department of Energy Office of Environmental Management (DOE-EM) External Technical Review of the Proposed On-Site Waste Disposal Facility (OSWDF)...

115

DOE O 461.2, Onsite Packaging and Transfer of Materials of National Security Interest  

Directives, Delegations, and Requirements

The order prescribes requirements and responsibilities for identifying and mitigating undue risk of onsite transfers that are non compliant with U.S. ...

2010-11-01T23:59:59.000Z

116

Development of Onsite Transportation Safety Documents for Nevada Test Site  

Science Conference Proceedings (OSTI)

Department of Energy (DOE) Orders require each DOE site to develop onsite transportation safety documents (OTSDs). The Nevada Test Site approach divided all onsite transfers into two groups with each group covered by a standalone OTSD identified as Non-Nuclear and Nuclear. The Non-Nuclear transfers involve all radioactive hazardous material in less than Hazard Category (HC)-3 quantities and all chemically hazardous materials. The Nuclear transfers involve all radioactive material equal to or greater than HC-3 quantities and radioactive material mated with high explosives regardless of quantity. Both OTSDs comply with DOE O 460.1B requirements. The Nuclear OTSD also complies with DOE O 461.1A requirements and includes a DOE-STD-3009 approach to hazard analysis (HA) and accident analysis as needed. All Nuclear OTSD proposed transfers were determined to be non-equivalent and a methodology was developed to determine if “equivalent safety” to a fully compliant Department of Transportation (DOT) transfer was achieved. For each HA scenario, three hypothetical transfers were evaluated: a DOT-compliant, uncontrolled, and controlled transfer. Equivalent safety is demonstrated when the risk level for each controlled transfer is equal to or less than the corresponding DOT-compliant transfer risk level. In this comparison the typical DOE-STD-3009 risk matrix was modified to reflect transportation requirements. Design basis conditions (DBCs) were developed for each non-equivalent transfer. Initial DBCs were based solely upon the amount of material present. Route-, transfer-, and site-specific conditions were evaluated and the initial DBCs revised as needed. Final DBCs were evaluated for each transfer’s packaging and its contents.

Frank Hand, Willard Thomas, Frank Sciacca, Manny Negrete, Susan Kelley

2008-05-08T23:59:59.000Z

117

Advanced On-Site Wastewater Treatment and Management Market Study: Volume 2: State Reports  

Science Conference Proceedings (OSTI)

This report is comprised of summaries of the status of on-site and small community wastewater systems in each state in the United States. The summaries provide an excellent general reference for further research into the status of each state's on-site wastewater systems.

2000-09-27T23:59:59.000Z

118

GRR/Elements/18-CA-c.2 - Onsite Treatment Process | Open Energy Information  

Open Energy Info (EERE)

source source History View New Pages Recent Changes All Special Pages Semantic Search/Querying Get Involved Help Apps Datasets Community Login | Sign Up Search Page Edit History Facebook icon Twitter icon » GRR/Elements/18-CA-c.2 - Onsite Treatment Process < GRR‎ | Elements Jump to: navigation, search Edit 18-CA-b.2 - Onsite Treatment Process Non-RCRA waste treated on-site receives a California on-site treatment permit from the California DTSC. See Flowchart 18-CA-XX. Retrieved from "http://en.openei.org/w/index.php?title=GRR/Elements/18-CA-c.2_-_Onsite_Treatment_Process&oldid=539943" What links here Related changes Special pages Printable version Permanent link Browse properties About us Disclaimers Energy blogs Linked Data Developer services OpenEI partners with a broad range of international organizations to grow

119

A demand responsive bidding mechanism with price elasticity matrix in wholesale electricity pools  

E-Print Network (OSTI)

In the past several decades, many demand-side participation features have been applied in the electricity power systems. These features, such as distributed generation, on-site storage and demand response, add uncertainties ...

Wang, Jiankang, S.M. Massachusetts Institute of Technology

2009-01-01T23:59:59.000Z

120

Shipping and Storage of Electric Motors  

Science Conference Proceedings (OSTI)

Electric motor predictive and preventive maintenance programs have been written and describe the best methodology for increasing motor reliability. However, many utilities have invested substantial resources into the procurement of spare motors. These motors are stored both onsite and off site (at vendor facilities). In addition, motors are being refurbished/reconditioned and must be shipped and possibly stored upon return.

2004-12-20T23:59:59.000Z

Note: This page contains sample records for the topic "adapting onsite electrical" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

" Row: NAICS Codes; Column: Electricity Components;"  

U.S. Energy Information Administration (EIA) Indexed Site

1.1 Electricity: Components of Net Demand, 2010;" 1.1 Electricity: Components of Net Demand, 2010;" " Level: National and Regional Data; " " Row: NAICS Codes; Column: Electricity Components;" " Unit: Million Kilowatthours." " "," " " "," ",,,"Total ","Sales and","Net Demand" "NAICS"," ",,"Transfers ","Onsite","Transfers","for" "Code(a)","Subsector and Industry","Purchases","In(b)","Generation(c)","Offsite","Electricity(d)" ,,"Total United States" 311,"Food",75652,21,5666,347,80993

122

" Row: NAICS Codes; Column: Electricity Components;"  

U.S. Energy Information Administration (EIA) Indexed Site

1.1 Electricity: Components of Net Demand, 2006;" 1.1 Electricity: Components of Net Demand, 2006;" " Level: National and Regional Data; " " Row: NAICS Codes; Column: Electricity Components;" " Unit: Million Kilowatthours." " "," " " "," ",,,"Total ","Sales and","Net Demand" "NAICS"," ",,"Transfers ","Onsite","Transfers","for" "Code(a)","Subsector and Industry","Purchases","In(b)","Generation(c)","Offsite","Electricity(d)" ,,"Total United States" 311,"Food",73242,309,4563,111,78003

123

GRR/Section 14-OR-f - Onsite Wastewater Management | Open Energy  

Open Energy Info (EERE)

GRR/Section 14-OR-f - Onsite Wastewater Management GRR/Section 14-OR-f - Onsite Wastewater Management < GRR Jump to: navigation, search GRR-logo.png GEOTHERMAL REGULATORY ROADMAP Roadmap Home Roadmap Help List of Sections Section 14-OR-f - Onsite Wastewater Management 14ORFOnsiteWastewaterManagementSepticSystems.pdf Click to View Fullscreen Contact Agencies Oregon Department of Environmental Quality Regulations & Policies OAR 340-071: Onsite Wastewater Treatment Systems OAR 340-073: DEQ Construction Standards Triggers None specified Click "Edit With Form" above to add content 14ORFOnsiteWastewaterManagementSepticSystems.pdf Error creating thumbnail: Page number not in range. Error creating thumbnail: Page number not in range. Error creating thumbnail: Page number not in range. Flowchart Narrative Over 30% of Oregonians dispose of wastewater from their homes and

124

Advances in field-portable mass spectrometers for on-site analytics  

Science Conference Proceedings (OSTI)

Learn how the combination of ambient ionization with portable mass spectroscopy can speed chemical analysis by streamlining sample preparation and throughput requirements. Advances in field-portable mass spectrometers for on-site analytics inform M

125

Guide for Operating an Interim On-Site Low Level Radioactive Waste Storage Facility  

Science Conference Proceedings (OSTI)

As a result of increasing low-level waste (LLW) disposal site uncertainty, the industry expects that utilities will have to rely on their own on-site storage LLW storage programs in the near future. This report captures essential information related to the operation of an on-site LLW storage program. The report is a comprehensive reference to which utilities can routinely refer throughout the development and implementation of the storage program and operation of the storage facility.

2004-11-16T23:59:59.000Z

126

National Research Needs Conference Proceedings: Risk-Based Decision Making for Onsite Wastewater Treatment  

Science Conference Proceedings (OSTI)

On May 19-20, 2000, the Research Needs Conference for "Risk-Based Decision Making for Onsite Wastewater Treatment" was convened in St. Louis, Missouri. The conference, funded by the U.S. Environmental Protection Agency (EPA), was the culmination of an eighteen-month-long effort by the National Decentralized Water Resources Capacity Development Project (NDWRCDP) to assist onsite wastewater leadership in identifying critical research gaps in the field. The five "White Papers" included in this volume of Pro...

2001-03-15T23:59:59.000Z

127

Distributed Energy Resources On-Site Optimization for Commercial Buildings with Electric and Thermal Storage Technologies  

E-Print Network (OSTI)

Systems, forthcoming 2008. Microgrid Symposium. Held atand carbon emissions, a microgrid’s distributed energyIn this paper, a microgrid is defined as a cluster of

Stadler, Michael

2008-01-01T23:59:59.000Z

128

Distributed Energy Resources On-Site Optimization for Commercial Buildings with Electric and Thermal Storage Technologies  

E-Print Network (OSTI)

and N. Zhou, “Distributed Generation with Heat Recovery andattractiveness of distributed generation with storage. Thecosts for distributed generation (DG) investments. The

Stadler, Michael

2008-01-01T23:59:59.000Z

129

Distributed Energy Resources On-Site Optimization for Commercial Buildings with Electric and Thermal Storage Technologies  

E-Print Network (OSTI)

2003. Hatziargyriou, N. et al. , “Microgrids, An Overview ofand Operation of Microgrids in Commercial Buildings”, IEEEsuccessful deployment of microgrids will depend heavily on

Stadler, Michael

2008-01-01T23:59:59.000Z

130

Distributed Energy Resources On-Site Optimization for Commercial Buildings with Electric and Thermal Storage Technologies  

E-Print Network (OSTI)

and heat-driven absorption chillers. Figure 1 shows a high-contains also heat for absorption chillers, and therefore,storage 11 flow battery absorption chiller solar thermal

Stadler, Michael

2008-01-01T23:59:59.000Z

131

Distributed Energy Resources On-Site Optimization for Commercial Buildings with Electric and Thermal Storage Technologies  

E-Print Network (OSTI)

alter the residual load profile, which can contribute toon the test site, its load profile, and its adopted DERdepends strongly on the load profile as well as solar

Stadler, Michael

2008-01-01T23:59:59.000Z

132

Distributed Energy Resources On-Site Optimization for Commercial Buildings with Electric and Thermal Storage Technologies  

E-Print Network (OSTI)

1. However, a part of the battery capacity is replaced bycapacity close to the optimal could be acquired, e.g. battery

Stadler, Michael

2008-01-01T23:59:59.000Z

133

Distributed Energy Resources On-Site Optimization for Commercial Buildings with Electric and Thermal Storage Technologies  

E-Print Network (OSTI)

and installed DG equipment (PV, solar thermal, natural gas5. a low storage, PV, and solar thermal price run; and 6. aenergy sources such as PV or solar thermal. However, this

Stadler, Michael

2008-01-01T23:59:59.000Z

134

Electrical engineering Electricity  

E-Print Network (OSTI)

generation Transmission Distribution · Electrical generators · Electric motors · High voltage engineering associated with the systems Electrical engineering · Electric power generation Transmission Distribution The electricity transported to load locations from a power station transmission subsystem The transmission system

Ã?nay, Devrim

135

REPORT OF ON-SITE INSPECTION WORKSHOP-16  

SciTech Connect

The central issue addressed by this workshop was the task of making the on-site inspection (OSI) part of the Comprehensive Nuclear-Test-Ban Treaty verification system operationally ready at entry into force of the Treaty. It is recognized, and this was emphasized by the 2008 OSI Integrated Field Exercise (IFE), that it is not possible to develop every part of the OSI regime simultaneously. Therefore, it is necessary to prioritize the approach to OSI readiness. The reviews of the IFE have pointed to many elements of OSI readiness that still need development. The objective of this workshop was to provide priorities for the path forward for Working Group B to consider. Several critical areas have been identified that are related to the development of OSI readiness: (1) Technology development: Priorities are radionuclide and noble gas sampling and analysis, visual observation, multispectral/infrared imaging methods, active seismic methods and the recognition of the importance of signatures. (2) Organizational development: Priorities are health and safety, the Operations Support Centre, the Equipment Storage and Maintenance Facility, information technology data flow and communications. (3) Resources: The expertise to develop key parts of the OSI regime is not available within the current OSI Division staff. To develop these aspects of the regime will require more staff or supplements to the staff with cost-free experts or other means. Aspects of the system that could benefit from more staff include radionuclide and noble gas detection methods, data flow and communications, visual observation, multispectral/infrared methods and health and safety. As the path forward, participants of this workshop recognized a need to optimize the development of OSI priorities. The outcome of this workshop is to suggest for consideration an operational approach to OSI readiness that utilizes results of an evaluation of the relative effectiveness of OSI elements versus their relative maturity. By integrating such an assessment with considerations of integrated operational capabilities and the anticipated level of inspection team self-sufficiency and measurable milestone criteria, a set of priorities for OSI development can be developed. Once these priorities have been established, the Policy Making Organs can decide upon the milestones, strategic plan and action plan to serve as guidance for implementation by the Provisional Technical Secretariat. The suggested operational approach is as follows: (1) Assess the relative effectiveness (importance) of OSI elements versus their relative maturity; (2) Determine the anticipated level of self-sufficiency; (3) Define measurable milestone criteria; and (4) Result: Milestones for OSI readiness.

Sweeney, J J

2009-07-07T23:59:59.000Z

136

Department of Energy Voluntary Protection Program - Part IV: Onsite review handbook  

SciTech Connect

Onsite Review Handbook contains criteria to be used in evaluating the management systems required for initial or continued participation in the Department of Energy Voluntary Protection Program (DOE-VPP), verifying and calculating rates of injury experience, the Onsite Review report format, and sample questions to be used during onsite interviews. This document should be used in conjunction with the first three DOE-VPP manuals (Part I: Program Elements, Part II: Procedures Manual, and Part III: Application Guidelines). This document is intended to assist Onsite Review team members and DOE contractors in evaluating safety and health programs, and to serve as guidance for DOE-VPP participants in performing their required annual evaluation. Requests for additional information or any questions may be addressed to a DOE-VPP Coordinator in the Office of Occupational Safety and Health Policy. The term contractor used throughout this document refers to an applicant to, or a participant in, the DOE-VPP. The term subcontractor refers to any organization that is contracted by the applicant or participant to do work at the site under review. The DOE-VPP Onsite Review Criteria contained in Appendix A provide guidance for evaluating a site`s implementation of the program requirements given in Part I: Program Elements. The program requirements are in bold italicized type, followed by guidance for ensuring implementation. Part I should be consulted for a complete description of the program requirements. These criteria should be used by team members whenever possible, but are not intended to be all inclusive. Determination of adequate implementation of the DOE-VPP requirements is at the team members` discretion. Guidance for calculating recordable injury and lost workday incidence rates is contained in Appendix B. The OSHA injury/illness records review and the associated calculations should be performed by Onsite Review Team members during the pre-onsite planning visit.

NONE

1995-07-01T23:59:59.000Z

137

The Implications of Carbon Taxation on Microgrid Adoption of Small-Scale On-Site Power Generation Using  

E-Print Network (OSTI)

LBNL-49309 The Implications of Carbon Taxation on Microgrid Adoption of Small-Scale On-Site Power .................................................................................................................1 1.1 Microgrid Concept

138

GRR/Section 10 - On-Site Evaluation Process | Open Energy Information  

Open Energy Info (EERE)

GRR/Section 10 - On-Site Evaluation Process GRR/Section 10 - On-Site Evaluation Process < GRR Jump to: navigation, search GRR-logo.png GEOTHERMAL REGULATORY ROADMAP Roadmap Home Roadmap Help List of Sections Section 10 - On-Site Evaluation Process 10SiteEvaluation.pdf Click to View Fullscreen Contact Agencies Bureau of Land Management U S Army Corps of Engineers United States Environmental Protection Agency Fish and Wildlife Service United States Department of Defense Regulations & Policies Endangered Species Act Clean Water Act Clean Air Act Triggers None specified Click "Edit With Form" above to add content 10SiteEvaluation.pdf Error creating thumbnail: Page number not in range. Error creating thumbnail: Page number not in range. Error creating thumbnail: Page number not in range. Flowchart Narrative

139

Federal Energy Management Program: Sample Documents for On-Site Renewable  

NLE Websites -- All DOE Office Websites (Extended Search)

Sample Documents for On-Site Renewable Power Purchase Agreements Sample Documents for On-Site Renewable Power Purchase Agreements The Federal Energy Management Program (FEMP) works with Federal agencies and partners to assemble sample documents from past on-site renewable power purchase agreement (PPA) projects to help streamline the PPA process. Requests for Proposal and Contracts Sample documents are available for the following requests for proposal: Photovoltaics at the Department of Energy's (DOE) Princeton Plasma Physics Laboratory: PPA request for proposal issued by DLA Energy on behalf of Princeton Plasma Physics Laboratory. National Renewable Energy Laboratory (NREL) Photovoltaics Opportunity Announcement: Opportunity announcement issued for the NREL Mesa Top photovoltaics (PV) power purchase agreement.

140

Proposed On-Site Waste Disposal Facility (OSWDF) at the Portsmouth Gaseous Diffusion Plant  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

OH OH EM Project: On-Site Disposal Facility ETR Report Date: February 2008 ETR-12 United States Department of Energy Office of Environmental Management (DOE-EM) External Technical Review of the Proposed On-Site Waste Disposal Facility (OSWDF) at the Portsmouth Gaseous Diffusion Plant Why DOE-EM Did This Review The On-Site Waste Disposal Facility (OSWDF) is proposed for long-term containment of contaminated materials from the planned Decontamination and Decommissioning (D&D) activities at the Portsmouth Gaseous Diffusion Plant. Acceptable performance of the proposed OSWDF will depend on interactions between engineered landfill features and operations methods that recognize the unique characteristics of the waste stream and site-

Note: This page contains sample records for the topic "adapting onsite electrical" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Summary - Proposed On-Site Disposal Facility (OSDF) at the Paducah Gaseous Diffusion Plant  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Paducah, KY Paducah, KY EM Project: On-Site Disposal Facility ETR Report Date: August 2008 ETR-16 United States Department of Energy Office of Environmental Management (DOE-EM) External Technical Review of the Proposed On-Site Disposal Facility(OSDF) at the Paducah Gaseous Diffusion Plant Why DOE-EM Did This Review The Paducah Gaseous Diffusion Plant (PGDP) is an active uranium enrichment facility that was placed on the National Priorities List. DOE is required to remediate the PGDP in accordance with the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA). DOE is evaluating alternatives to dispose of waste generated from the remedial activities at the PGDP. One option is to construct an on-site disposal facility (OSDF) meeting the CERCLA requirements.

142

EA-1782: University of Delaware Lewes Campus Onsite Wind Energy Project |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

82: University of Delaware Lewes Campus Onsite Wind Energy 82: University of Delaware Lewes Campus Onsite Wind Energy Project EA-1782: University of Delaware Lewes Campus Onsite Wind Energy Project SUMMARY The University of Delaware has constructed a wind turbine adjacent to its College of Earth, Ocean, and Environment campus in Lewes, Delaware. DOE proposed to provide the University a $1.43 million grant for this Wind Energy Project from funding provided in the Omnibus Appropriations Act of 2009 (Public Law 111-8) and an additional $1 million provided in the Energy and Water Development Appropriations Act of Fiscal Year 2010. This EA analyzed the potential environmental impacts of the University of Delaware's Wind Energy Project at its Lewes campus and, for purposes of comparison, an alternative that assumes the wind turbine had not been

143

Visual Sample Plan (VSP) Statistical Software as Related to the CTBTO’s On-Site Inspection Procedure  

SciTech Connect

In the event of a potential nuclear weapons test the Comprehensive Nuclear-Test-Ban Treaty Organization (CTBTO) is commissioned to conduct an on-site investigation (OSI) of the suspected test site in an effort to find confirmatory evidence of the nuclear test. The OSI activities include collecting air, surface soil, and underground samples to search for indications of a nuclear weapons test - these indicators include radionuclides and radioactive isotopes Ar and Xe. This report investigates the capability of the Visual Sample Plan (VSP) software to contribute to the sampling activities of the CTBTO during an OSI. VSP is a statistical sampling design software, constructed under data quality objectives, which has been adapted for environmental remediation and contamination detection problems for the EPA, US Army, DoD and DHS among others. This report provides discussion of a number of VSP sample designs, which may be pertinent to the work undertaken during an OSI. Examples and descriptions of such designs include hot spot sampling, combined random and judgment sampling, multiple increment sampling, radiological transect surveying, and a brief description of other potentially applicable sampling methods. Further, this work highlights a potential need for the use of statistically based sample designs in OSI activities. The use of such designs may enable canvassing a sample area without full sampling, provide a measure of confidence that radionuclides are not present, and allow investigators to refocus resources in other areas of concern.

Pulsipher, Trenton C.; Walsh, Stephen J.; Pulsipher, Brent A.; Milbrath, Brian D.

2010-09-01T23:59:59.000Z

144

Commissioning & Optimization of On-Site Renewable Energy Systems  

E-Print Network (OSTI)

Today, many electrical contractors and photovoltaic (PV) integrators engineer and install custom systems on a variety of existing and new construction. These systems are designed specifically to the building configurations and to required utility interconnection. Each system therefore becomes a unique challenge to design, install and commission. This paper will present a detailed review of pre-commissioning activities, followed by the formal commissioning and startup of PV systems. A step by step list of activities, including a review of compliance to the National Electrical Code®, will be presented with examples from actual completed installations. Proper understanding and installation of these systems will ensure the safety of all personnel during the commissioning and subsequent operation by the end user. One of the often overlooked benefits of the commissioning is to include the client in the overall review of the system and provide an explanation of the rational for the design, installation and operation of the system. This is not a substitute for the final hand over of the system, but rather a way for the client to become knowledgeable with the completed project. Finally, the commissioning procedure provides a view into the operation and maintenance (O&M) of the completed project. The commissioning process therefore presents a safe and thorough procedure for the final testing and evaluation of the system prior to hand over to the client.

Gardner, J.C.

2011-01-01T23:59:59.000Z

145

Adaptive protection algorithm and system  

Science Conference Proceedings (OSTI)

An adaptive protection algorithm and system for protecting electrical distribution systems traces the flow of power through a distribution system, assigns a value (or rank) to each circuit breaker in the system and then determines the appropriate trip set points based on the assigned rank.

Hedrick, Paul (Pittsburgh, PA); Toms, Helen L. (Irwin, PA); Miller, Roger M. (Mars, PA)

2009-04-28T23:59:59.000Z

146

Cost Effectiveness of On-Site Chlorine Generation for Chlorine Truck Attack Prevention  

Science Conference Proceedings (OSTI)

A chlorine tank truck attack could cause thousands of fatalities. As a means of preventing chlorine truck attacks, I consider the on-site generation of chlorine or hypochlorite at all U.S. facilities currently receiving chlorine by truck. I develop and ... Keywords: applications, cost-effectiveness, public policy, risk analysis, terrorism, uncertainty

Anthony M. Barrett

2010-12-01T23:59:59.000Z

147

Overview of the NETL Onsite Fuel Cell R&D Program  

DOE Green Energy (OSTI)

Onsite fuel cell R&D at the National Energy Technology Laboratory (NETL) has been ongoing since the late 1990's. The objective of the onsite program is to support development efforts of the fuel cell technology-related product lines and conduct fundamental research of advanced fuel cell technology. Of special focus is NETL's new 10-yr, multimillion dollar development program call the Solid State Energy Conversion Alliance (SECA). This program is aimed at developing low-cost mass manufactured solid oxide fuel cell technology for a wide variety of applications. In addition to SECA, there are a variety of other products/programs at NETL that can be supported by the onsite R&D group. Vision 21 is one such program and is the U. S. Department of Energy's initiative to deploy high efficiency, ultra-clean co-production coal conversion power plants in the twenty-first century. These plants will consist of power and coproduction modules, which are integrated to meet specific power and chemical markets. In response to these program initiatives, NETL's onsite R&D group is developing significant capability and focusing current activity on the following areas: (1) High-Temperature Fuel Cell Test & Characterization; (2) Integrated Fuel Processing; (3) Fuel Cell Component and Systems Modeling; and (4) Sensors, Controls, and Instrumentation. This report discusses plans and ongoing activities in each of these areas.

Berry, David A.; Gemmen, Randall S.

2001-11-06T23:59:59.000Z

148

Guidance for characterizing explosives contaminated soils: Sampling and selecting on-site analytical methods  

SciTech Connect

A large number of defense-related sites are contaminated with elevated levels of secondary explosives. Levels of contamination range from barely detectable to levels above 10% that need special handling due to the detonation potential. Characterization of explosives-contaminated sites is particularly difficult due to the very heterogeneous distribution of contamination in the environment and within samples. To improve site characterization, several options exist including collecting more samples, providing on-site analytical data to help direct the investigation, compositing samples, improving homogenization of samples, and extracting larger samples. On-site analytical methods are essential to more economical and improved characterization. On-site methods might suffer in terms of precision and accuracy, but this is more than offset by the increased number of samples that can be run. While verification using a standard analytical procedure should be part of any quality assurance program, reducing the number of samples analyzed by the more expensive methods can result in significantly reduced costs. Often 70 to 90% of the soil samples analyzed during an explosives site investigation do not contain detectable levels of contamination. Two basic types of on-site analytical methods are in wide use for explosives in soil, calorimetric and immunoassay. Calorimetric methods generally detect broad classes of compounds such as nitroaromatics or nitramines, while immunoassay methods are more compound specific. Since TNT or RDX is usually present in explosive-contaminated soils, the use of procedures designed to detect only these or similar compounds can be very effective.

Crockett, A.B. [Idaho National Engineering Lab., Idaho Falls, ID (United States); Craig, H.D. [Environmental Protection Agency, Portland, OR (United States). Oregon Operations Office; Jenkins, T.F. [Army Cold Regions Research and Engineering Lab., Hanover, NH (United States); Sisk, W.E. [Army Environmental Center, Aberdeen Proving Grounds, MD (United States)

1996-09-01T23:59:59.000Z

149

Dynamic provisioning in next-generation data centers with on-site power production  

Science Conference Proceedings (OSTI)

The critical need for clean and economical sources of energy is transforming data centers that are primarily energy consumers to also energy producers. We focus on minimizing the operating costs of next-generation data centers that can jointly optimize ... Keywords: data centers, dynamic provisioning, on-site power production, online algorithm

Jinlong Tu, Lian Lu, Minghua Chen, Ramesh K. Sitaraman

2013-01-01T23:59:59.000Z

150

SCR Catalyst Disposal, Recycle, and On-site Washing Options and Experience  

Science Conference Proceedings (OSTI)

As Selective Catalytic Reduction (SCR) technology becomes more widespread and the catalyst fleet ages, cost-effective and environmentally friendly approaches are need to handle the increasing volumes of spent catalyst or extend its life through simple on-site processing. This report addresses various issues related to catalyst rejuvenation, cleaning, recycling, and disposal.

2008-12-03T23:59:59.000Z

151

DISTANT EDUCATION OF MEDICAL DOCTORS FOR DEALING WITH ON-SITE EMERGENCY SITUATIONS.  

E-Print Network (OSTI)

1 DISTANT EDUCATION OF MEDICAL DOCTORS FOR DEALING WITH ON-SITE EMERGENCY SITUATIONS. V. Andersen that might be unusual compared to the daily routine. In major emergencies, the medical team is moved to the site of the emergency instead of waiting for the casualties at the casualty ward. Ensuring fast

152

Investigating Plug-in Electric Vehicle Charging Stations in Microgrid  

Science Conference Proceedings (OSTI)

PHEVs/PEVs have received increasing attention because of their low pollution emissions, low energy dependence, and high fuel economy. In the near future, most PHEV/PEV enabled parking decks are expected to be powered by small-scale and onsite distributed ... Keywords: Plug-in Electric Vehicle, Microgrid, Smart Grid

Mengqi Wang; Tao Jin

2012-10-01T23:59:59.000Z

153

Conventional and fuzzy PI control of voltage-source inverter-fed induction motor drive for electric vehicle  

Science Conference Proceedings (OSTI)

Keywords: adaptive control, control algorithm, electric vehicle, fuzzy control, inverter drive system

Tadeusz Stefanski

1995-12-01T23:59:59.000Z

154

Adaptive sampler  

DOE Patents (OSTI)

An adaptive data compression device for compressing data having variable frequency content, including a plurality of digital filters for analyzing the content of the data over a plurality of frequency regions, a memory, and a control logic circuit for generating a variable rate memory clock corresponding to the analyzed frequency content of the data in the frequency region and for clocking the data into the memory in response to the variable rate memory clock.

Watson, Bobby L. (Idaho Falls, ID); Aeby, Ian (Fremont, CA)

1982-01-01T23:59:59.000Z

155

Adaptive sampler  

DOE Patents (OSTI)

An adaptive data compression device for compressing data is described. The device has a frequency content, including a plurality of digital filters for analyzing the content of the data over a plurality of frequency regions, a memory, and a control logic circuit for generating a variable rate memory clock corresponding to the analyzed frequency content of the data in the frequency region and for clocking the data into the memory in response to the variable rate memory clock.

Watson, B.L.; Aeby, I.

1980-08-26T23:59:59.000Z

156

Table E13.1. Electricity: Components of Net Demand, 1998  

U.S. Energy Information Administration (EIA) Indexed Site

1. Electricity: Components of Net Demand, 1998;" 1. Electricity: Components of Net Demand, 1998;" " Level: National and Regional Data; " " Row: Values of Shipments and Employment Sizes;" " Column: Electricity Components;" " Unit: Million Kilowatthours." " ",," "," ",," " ,,,,"Sales and","Net Demand","RSE" "Economic",,,"Total Onsite","Transfers","for","Row" "Characteristic(a)","Purchases","Transfers In(b)","Generation(c)","Offsite","Electricity(d)","Factors" ,"Total United States"

157

Electrical Circuit Tester  

DOE Patents (OSTI)

An electrical circuit testing device is provided, comprising a case, a digital voltage level testing circuit with a display means, a switch to initiate measurement using the device, a non-shorting switching means for selecting pre-determined electrical wiring configurations to be tested in an outlet, a terminal block, a five-pole electrical plug mounted on the case surface and a set of adapters that can be used for various multiple-pronged electrical outlet configurations for voltages from 100 600 VAC from 50 100 Hz.

Love, Frank (Amarillo, TX)

2006-04-18T23:59:59.000Z

158

Recommended Changes to Guidelines for Operating an Interim On-Site Low Level Radioactive Waste Storage Facility - For NRC Review  

Science Conference Proceedings (OSTI)

The majority of commercial U.S. nuclear stations have constructed on-site low-level waste (LLW) storage facilities, and most of these same utilities are experiencing or have experienced at least one period of interim on-site storage. EPRI has issued two revisions of Guidelines for Operating an Interim On-Site Low Level Radioactive Waste Storage Facility. Revision 1 of these Guidelines focused on operational considerations and incorporated many of the lessons learned while operating various types of LLW s...

2011-12-19T23:59:59.000Z

159

ON-SITE DEMONSTRATION PROCEDURE FOR SOLID-STATE FLUORESCENT BALLAST  

E-Print Network (OSTI)

state ballast supplies electrical power to the lamp at acan transform the input electrical power to the lamp morethe measurement of electrical power, voltage, and current if

Verderber, Rudy

2013-01-01T23:59:59.000Z

160

On-Site Generation Simulation with EnergyPlus for Commercial Buildings  

E-Print Network (OSTI)

component of the electricity tariff. They are proportionalload profiles, electricity and natural gas tariff structureloads 3 , electricity and natural gas tariff structure and

Stadler, Michael; Firestone, Ryan; Curtil, Dimitri; Marnay, Chris

2006-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "adapting onsite electrical" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Optimal selection of on-site generation with combined heat and power applications  

E-Print Network (OSTI)

Analysed at NBVC Electricity Tariff Natural Gas Tariff Nopurchase any electricity under the tariff. This is simplytheir electricity and heat requirements, the tariffs they

Siddiqui, Afzal S.; Marnay, Chris; Bailey, Owen; Hamachi LaCommare, Kristina

2004-01-01T23:59:59.000Z

162

On-Site Generation Simulation with EnergyPlus for Commercial Buildings  

E-Print Network (OSTI)

http://tariffs.lbl.gov/ NSTAR electricity rates, http://expensive than volumetric electricity rates, DG may still beutilities NSTAR (NSTAR electricity rates) and Keyspan (

Stadler, Michael; Firestone, Ryan; Curtil, Dimitri; Marnay, Chris

2006-01-01T23:59:59.000Z

163

ALTERNATIVES OF MACCS2 IN LANL DISPERSION ANALYSIS FOR ONSITE AND OFFSITE DOSES  

Science Conference Proceedings (OSTI)

In modeling atmospheric dispersion to determine accidental release of radiological material, one of the common statistical analysis tools used at Los Alamos National Laboratory (LANL) is MELCOR Accident Consequence Code System, Version 2 (MACCS2). MACCS2, however, has some limitations and shortfalls for both onsite and offsite applications. Alternative computer codes, which could provide more realistic calculations, are being investigated for use at LANL. In the Yucca Mountain Project (YMP), the suitability of MACCS2 for the calculation of onsite worker doses was a concern; therefore, ARCON96 was chosen to replace MACCS2. YMP's use of ARCON96 provided results which clearly demonstrated the program's merit for onsite worker safety analyses in a wide range of complex configurations and scenarios. For offsite public exposures, the conservatism of MACCS2 on the treatment of turbulence phenomena at LANL is examined in this paper. The results show a factor of at least two conservatism in calculated public doses. The new EPA air quality model, AERMOD, which implements advanced meteorological turbulence calculations, is a good candidate for LANL applications to provide more confidence in the accuracy of offsite public dose projections.

Wang, John HC [Los Alamos National Laboratory

2012-05-01T23:59:59.000Z

164

Thermoacoustic magnetohydrodynamic electrical generator  

DOE Patents (OSTI)

A thermoacoustic magnetohydrodynamic electrical generator includes an intrinsically irreversible thermoacoustic heat engine coupled to a magnetohydrodynamic electrical generator. The heat engine includes an electrically conductive liquid metal as the working fluid and includes two heat exchange and thermoacoustic structure assemblies which drive the liquid in a push-pull arrangement to cause the liquid metal to oscillate at a resonant acoustic frequency on the order of 1000 Hz. The engine is positioned in the field of a magnet and is oriented such that the liquid metal oscillates in a direction orthogonal to the field of the magnet, whereby an alternating electrical potential is generated in the liquid metal. Low-loss, low-inductance electrical conductors electrically connected to opposite sides of the liquid metal conduct an output signal to a transformer adapted to convert the low-voltage, high-current output signal to a more usable higher voltage, lower current signal.

Wheatley, J.C.; Swift, G.W.; Migliori, A.

1984-11-16T23:59:59.000Z

165

Generating Electricity with your Steam System: Keys to Long Term Savings  

E-Print Network (OSTI)

The application of combined heat and power principals to existing plant steam systems can help produce electricity at more than twice efficiency of grid generated electricity. In this way, steam plant managers can realize substantial savings with relatively quick payback of capital. Carefully planned and executed projects are the key to unlocking the maximum value of generating electricity from an existing steam system. This paper illustrates the key concepts of generating onsite power with backpressure steam turbine generators along with practical considerations.

Bullock, B.; Downing, A.

2010-01-01T23:59:59.000Z

166

"Table A16. Components of Total Electricity Demand by Census Region, Industry"  

U.S. Energy Information Administration (EIA) Indexed Site

6. Components of Total Electricity Demand by Census Region, Industry" 6. Components of Total Electricity Demand by Census Region, Industry" " Group, and Selected Industries, 1991" " (Estimates in Million Kilowatthours)" " "," "," "," "," "," "," "," " " "," "," "," "," ","Sales and/or"," ","RSE" "SIC"," "," ","Transfers","Total Onsite","Transfers","Net Demand for","Row" "Code(a)","Industry Groups and Industry","Purchases","In(b)","Generation(c)","Offsite","Electricity(d)","Factors"

167

EIA - Annual Energy Outlook 2008 (Early Release)-Electricity Generation  

Gasoline and Diesel Fuel Update (EIA)

Electricity Generation Electricity Generation Annual Energy Outlook 2008 (Early Release) Electricity Generation U.S. electricity consumption—including both purchases from electric power producers and on-site generation—increases steadily in the AEO2008 reference case, at an average rate of 1.3 percent per year. In comparison, electricity consumption grew by annual rates of 4.2 percent, 2.6 percent, and 2.3 percent in the 1970s, 1980s, and 1990s, respectively. The growth rate in the AEO2008 projection is lower than in the AEO2007 reference case (1.5 percent per year), and it leads to lower projections of electricity generation. Figure 4. Electricity generation by fuel, 1980-2030 (billion kilowatthours). Need help, contact the National Energy Information Center at 202-586-8800.

168

Transfer Cask Assembly Onsite Transfer of K-Basin Fuel at Hanford  

DOE Green Energy (OSTI)

Packaging Technology, Inc. was awarded a contract for the design and fabrication of a unique 18.5-ton transportation system to be used on-site at Hanford, WA. Unique aspects include rectangular cask geometry, solid 7 inch-thick stainless steel construction, hinged lid with remotely operable quick release locking mechanism. The lid maintains shielding and material confinement integrity after hypothetical accident conditions, and is equipped with a hydrogen venting system. This paper presents how the project requirements were translated into a successful design, and includes a brief discussion of a confirmation test program.

BRUBAKER, M.L.

2002-07-01T23:59:59.000Z

169

On-site demonstration procedure for solid-state fluorescent ballast  

SciTech Connect

The report was presented to plant engineers and managers who were involved in an on-site demonstration of EETech solid-state ballasts for two 40-watt T12 fluorescent lamps. The report includes a brief review of the operating principles of solid-state fluorescent ballasts and the status of development achieved during the LBL program. The remainder of the test describes the techniques of managing and instrumenting a test area for assessing the performance of solid-state fluorescent ballasts at an occupied site.

Verderber, R.; Morse, O.

1980-09-01T23:59:59.000Z

170

Electric Vehicles  

Energy.gov (U.S. Department of Energy (DOE))

Electricity can be used as a transportation fuel to power battery electric vehicles (EVs). EVs store electricity in an energy storage device, such as a battery.

171

Optimal selection of on-site generation with combined heat and power applications  

E-Print Network (OSTI)

of electricity distribution systems and theu Purchased electricity from the distribution company by theelectricity that it needs beyond its self-generation from the distribution

Siddiqui, Afzal S.; Marnay, Chris; Bailey, Owen; Hamachi LaCommare, Kristina

2004-01-01T23:59:59.000Z

172

INADVERTENT INTRUDER ANALYSIS FOR THE PORTSMOUTH ON-SITE WASTE DISPOSAL FACILITY  

SciTech Connect

An On-Site Alternative is being evaluated as part of the Remedial Investigation and Feasibility Study (RI/FS) process for evaluation of alternatives for the disposal of waste generated from decontamination and decommissioning (D&D) at Portsmouth. The On-Site Alternative involves construction of an On-Site Waste Disposal Facility (OSWDF). An inadvertent intruder analysis must be conducted for the OSWDF. The inadvertent intruder analysis considers the radiological impacts to hypothetical persons who are assumed to inadvertently intrude on the Portsmouth OSWDF site after institutional control ceases 100 years after site closure. The focus in development of exposure scenarios for inadvertent intruders was on selecting reasonable events that may occur, giving consideration to regional customs and construction practices. An important assumption in all scenarios is that an intruder has no prior knowledge of the existence of a waste disposal facility at the site. Therefore, after active institutional control ceases, certain exposure scenarios are assumed to be precluded only by the physical state of the disposal facility, i.e., the integrity of the engineered barriers used in facility construction or the thickness of clean material above the waste. Passive institutional controls, such as permanent marker systems at the disposal site and public records of prior land use, also could prevent inadvertent intrusion after active institutional control ceases, but the efficacy of passive institutional controls is not assumed in this analysis. Results of the analysis show that a hypothetical inadvertent intruder at the OSWDF who, in the worst case scenario, resides on the site and consumes vegetables from a garden established on the site using contaminated soil (chronic agriculture scenario) would receive a maximum chronic dose of approximately 7.0 mrem/yr during the 1000 year period of assessment. This dose falls well below the DOE chronic dose limit of 100 mrem/yr. Results of the analysis also showed that a hypothetical inadvertent intruder at the OSWDF who, in the worst case scenario, excavates a basement in the soil that reaches the waste (acute basement construction scenario) would receive a maximum acute dose of approximately 0.25 mrem/yr during the 1000 year period of assessment. This dose falls well below the DOE acute dose limit of 500 mrem/yr.

Smith, F.; Phifer, M.

2013-09-30T23:59:59.000Z

173

"Table A25. Components of Total Electricity Demand by Census Region, Census Division, Industry"  

U.S. Energy Information Administration (EIA) Indexed Site

Components of Total Electricity Demand by Census Region, Census Division, Industry" Components of Total Electricity Demand by Census Region, Census Division, Industry" " Group, and Selected Industries, 1994" " (Estimates in Million Kilowatthours)" " "," "," "," "," "," "," "," " " "," "," "," "," ","Sales and/or"," ","RSE" "SIC"," "," ","Transfers","Total Onsite","Transfers","Net Demand for","Row" "Code(a)","Industry Group and Industry","Purchases","In(b)","Generation(c)","Offsite","Electricity(d)","Factors"

174

Laboratories for the 21st Century: Best Practices (Brochure): Onsite Distributed Generation Systems For Laboratories  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

L L a b o r a t o r i e s f o r t h e 2 1 s t C e n t u r y : B e s t P r a c t i c e s This combined heat and power system at the Bristol-Myers Squibb laboratory in Wallingford, Connecticut, could meet 100% of the lab's power requirement, if necessary. Bernard Blesinger / PIX 12552 ONSITE DISTRIBUTED GENERATION SYSTEMS FOR LABORATORIES Introduction Laboratories have unique requirements for lighting, ventilation, and scientific equipment with each requiring a considerable amount of energy. The reliability of that energy is very important. Laboratories must be able to conduct research without power interruptions, which can damage both equipment and experiments. Generating power and heat on site is one good way to enhance energy reliability, improve fuel utilization efficiency, reduce utility costs,

175

Feasibility studies on the use of TRUPACT-1 for on-site transportation of DOE LLW  

SciTech Connect

In this paper the authors propose using TRUPACT-I, with modifications to its storage system, to facilitate on-site transportation of US Department of Energy (DOE) low-level waste (LLW). TRUPACT-I was designed as a type-B contact-handled transuranic (CH-TRU) waste transportation system for use in Waste Isolation Pilot Plant-related operations and was subjected to the required type-B container accident tests, which it successfully passed. Thus, from a safety standpoint, TRUPACT-1 is provided with double containment, impact limitation, and fire-retardant capabilities. Furthermore, because TRUPACT-1 was developed to transport CH-TRU waste, which is characterized by a higher total activity, larger decay heat, and higher dose rate than LLW, it would be overqualified for the requirements of LLW transportation.

Hills, C.R.; Banjac, V.; Heger, A.S. (Univ. of New Mexico, Albuquerque (United States))

1993-01-01T23:59:59.000Z

176

Fractional domain walls from on-site softening in dipolar bosons  

E-Print Network (OSTI)

We study dipolar bosons in a 1D optical lattice and identify a region in parameter space---strong coupling but relatively weak on-site repulsion---hosting a series of stable charge-density-wave (CDW) states whose low-energy excitations, built from "fractional domain walls," have remarkable similarities to those of non-Abelian fractional quantum Hall states. Here, a conventional domain wall between translated CDW's may be split by inserting strings of degenerate, but inequivalent, CDW states. Outside these insulating regions, we find numerous supersolids as well as a superfluid regime. The mentioned phases should be accessible experimentally and, in particular, the fractional domain walls can be created in the ground state using single-site addressing, i.e., by locally changing the chemical potential.

Emma Wikberg; Jonas Larson; Emil J. Bergholtz; Anders Karlhede

2011-09-15T23:59:59.000Z

177

Utility investment in on-site solar: risk and return analysis for capitalization and financing  

DOE Green Energy (OSTI)

A set of financial strategies designed to accelerate the penetration of on-site solar heating and cooling systems are studied. The approach of portfolio theory or the capital asset pricing model (CAPM) is used. The major features of the CAPM is summarized including a survey of those applications which are most relevant to the analysis. These include utility return on equity calculations and project evaluation techniques. How to apply empirical results is discussed based on CAPM methods. In particular, applications to the capitalization variant of the utility investment strategy and the financing variant are distinguished. Subsidization rationales are also discussed. Empirical results to date are summarized, including estimation problems for the various risk measures. The general problem of financial risk assessment for energy technologies is reviewed. (MHR)

Kahn, E.; Schutz, S.

1978-09-01T23:59:59.000Z

178

Plug-In Hybrid Electric Vehicle Environmental Analysis--Electric Sector Modeling of CO2 Emissions  

Science Conference Proceedings (OSTI)

This Electric Power Research Institute has initiated a comprehensive collaborative study to quantify the environmental impacts of electric transportation, specifically with respect to plug-in hybrid electric vehicles (PHEVs). This technical update describes the adaptation of the EPRI electric sector model for the analysis of CO2 emissions from the charging on PHEVs on the electrical grid. A "PHEV Base Case" was developed using baseline assumptions from the "EPRI Base Case," a nominal set of key assumptio...

2006-11-29T23:59:59.000Z

179

Volatile Energy Costs and the Floundering Deregulation of Electricity: A  

NLE Websites -- All DOE Office Websites (Extended Search)

Volatile Energy Costs and the Floundering Deregulation of Electricity: A Volatile Energy Costs and the Floundering Deregulation of Electricity: A Fresh Look at Integrating Supply-Side and Demand-Side Resources Speaker(s): Bill Kelly Robert Redlinger Date: January 19, 2001 - 12:00pm Location: 90-3148 Seminar Host/Point of Contact: Julie Osborn The restructuring of the California electricity industry has not proceeded as intended. A generation capacity shortage, combined with spiraling natural gas costs and a flawed electricity market structure, have led to unprecedented wholesale electricity prices, power outages, and a political and financial crisis for the State. This crisis will not be solved through increasing electricity supply alone. Energy industry observers agree that 1.) energy efficiency, 2.) distributed on-site generation, and 3.) price

180

Industrial Powerhouse Optimization in the Deregulated Electricity Marketplace  

E-Print Network (OSTI)

The State of Delaware deregulated the retail sale of electricity in 2002, enabling buyers to procure power on a real-time price schedule and sell excess generated power to the grid. This initiative has prompted industrial sites, especially those with on-site generation capability, to evaluate the benefits and risks of the deregulated market. Deregulation can offer significant potential savings to industrial customers. However, with this opportunity comes exposure to turbulent fluctuations in electricity prices, which can sometimes reach $1,000/MW-hr. If a customer is unprepared for high electricity prices, an entire year of electricity cost savings can quickly be erased. This paper describes how one industrial site evaluated the risks and benefits of electricity deregulation and implemented real-time optimization of the electricity make-buy decision.

Hughes, P. D.; Bailey, W. F.

2003-05-01T23:59:59.000Z

Note: This page contains sample records for the topic "adapting onsite electrical" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Table A19. Components of Total Electricity Demand by Census Region and  

U.S. Energy Information Administration (EIA) Indexed Site

Components of Total Electricity Demand by Census Region and" Components of Total Electricity Demand by Census Region and" " Economic Characteristics of the Establishment, 1991" " (Estimates in Million Kilowatthours)" " "," "," "," ","Sales/"," ","RSE" " "," ","Transfers","Onsite","Transfers"," ","Row" "Economic Characteristics(a)","Purchases","In(b)","Generation(c)","Offsite","Net Demand(d)","Factors" ,"Total United States" "RSE Column Factors:",0.5,1.4,1.3,1.9,0.5 "Value of Shipments and Receipts" "(million dollars)"

182

Table A26. Components of Total Electricity Demand by Census Region, Census Di  

U.S. Energy Information Administration (EIA) Indexed Site

Components of Total Electricity Demand by Census Region, Census Division, and" Components of Total Electricity Demand by Census Region, Census Division, and" " Economic Characteristics of the Establishment, 1994" " (Estimates in Million Kilowatthours)" " "," "," "," ","Sales/"," ","RSE" " "," ","Transfers","Onsite","Transfers"," ","Row" "Economic Characteristics(a)","Purchases","In(b)","Generation(c)","Offsite","Net Demand(d)","Factors" ,"Total United States" "RSE Column Factors:",0.5,2.1,1.2,2,0.4 "Value of Shipments and Receipts"

183

ELECTRIC CONTACT MEANS  

DOE Patents (OSTI)

A switch adapted to maintain electrical connections under conditions of vibration or acceleration is described. According to the invention, thc switch includes a rotatable arm carrying a conductive bar arranged to close against two contacts spaced in the same plane. The firm and continuous engagement of the conductive bar with the contacts is acheived by utilizeing a spring located betwenn the vbar and athe a rem frzme and slidable mounting the bar in channel between two arms suspendef from the arm frame.

Grear, J.W. Jr.

1959-03-10T23:59:59.000Z

184

Experimental Adaptive Bayesian Tomography  

E-Print Network (OSTI)

We report an experimental realization of an adaptive quantum state tomography protocol. Our method takes advantage of a Bayesian approach to statistical inference and is naturally tailored for adaptive strategies. For pure states we observe close to 1/N scaling of infidelity with overall number of registered events, while best non-adaptive protocols allow for $1/\\sqrt{N}$ scaling only. Experiments are performed for polarization qubits, but the approach is readily adapted to any dimension.

Konstantin Kravtsov; Stanislav Straupe; Igor Radchenko; Neil Houlsby; Sergey Kulik

2013-03-07T23:59:59.000Z

185

Electricity Reliability  

NLE Websites -- All DOE Office Websites (Extended Search)

lines and bar graph Electricity Reliability The Consortium for Electric Reliability Technology Solutions (CERTS) conducts research, develops, and disseminates new methods, tools,...

186

Electric Vehicles  

NLE Websites -- All DOE Office Websites (Extended Search)

government incentives or subsidies in the near future. Companies active in the electric automobile area There are no companies directly active in the electric automobile...

187

A business case for on-site generation: The BD biosciences pharmingen project  

E-Print Network (OSTI)

of scale ensure the cost per kWh of DER falls as systems getflat electricity rates (same cost per kWh at any time and no

Firestone, Ryan; Creighton, Charles; Bailey, Owen; Marnay, Chris; Stadler, Michael

2003-01-01T23:59:59.000Z

188

A C. elegans-based foam for rapid on-site detection of residual live virus.  

Science Conference Proceedings (OSTI)

In the response to and recovery from a critical homeland security event involving deliberate or accidental release of biological agents, initial decontamination efforts are necessarily followed by tests for the presence of residual live virus or bacteria. Such 'clearance sampling' should be rapid and accurate, to inform decision makers as they take appropriate action to ensure the safety of the public and of operational personnel. However, the current protocol for clearance sampling is extremely time-intensive and costly, and requires significant amounts of laboratory space and capacity. Detection of residual live virus is particularly problematic and time-consuming, as it requires evaluation of replication potential within a eukaryotic host such as chicken embryos. The intention of this project was to develop a new method for clearance sampling, by leveraging Sandia's expertise in the biological and material sciences in order to create a C. elegans-based foam that could be applied directly to the entire contaminated area for quick and accurate detection of any and all residual live virus by means of a fluorescent signal. Such a novel technology for rapid, on-site detection of live virus would greatly interest the DHS, DoD, and EPA, and hold broad commercial potential, especially with regard to the transportation industry.

Negrete, Oscar A.; Branda, Catherine; Hardesty, Jasper O. E. (Sandia National Laboratories, Albuquerque, NM); Tucker, Mark David (Sandia National Laboratories, Albuquerque, NM); Kaiser, Julia N. (Global Product Management, Hilden, Germany); Kozina, Carol L.; Chirica, Gabriela S.

2012-02-01T23:59:59.000Z

189

PORTSMOUTH ON-SITE DISPOSAL CELL HIGH DENSITY POLYETHYLENE GEOMEMBRANE LONGEVITY  

Science Conference Proceedings (OSTI)

It is anticipated that high density polyethylene (HDPE) geomembranes will be utilized within the liner and closure cap of the proposed On-Site Disposal Cell (OSDC) at the Portsmouth Gaseous Diffusion Plant. The likely longevity (i.e. service life) of HDPE geomembranes in OSDC service is evaluated within the following sections of this report: (1) Section 2.0 provides an overview of HDPE geomembranes, (2) Section 3.0 outlines potential HDPE geomembranes degradation mechanisms, (3) Section 4.0 evaluates the applicability of HDPE geomembrane degradation mechanisms to the Portsmouth OSDC, (4) Section 5.0 provides a discussion of the current state of knowledge relative to the longevity (service life) of HDPE geomembranes, including the relation of this knowledge to the Portsmouth OSDC, and (5) Section 6.0 provides summary and conclusions relative to the anticipated service life of HDPE geomembranes in OSDC service. Based upon this evaluation it is anticipated that the service life of HDPE geomembranes in OSDC service would be significantly greater than the 200 year service life assumed for the OSDC closure cap and liner HDPE geomembranes. That is, a 200 year OSDC HDPE geomembrane service life is considered a conservative assumption.

Phifer, M.

2012-01-31T23:59:59.000Z

190

The Energy Resource Center: On-Site Technical Assistance and Training Programs for Texas School Districts  

E-Print Network (OSTI)

Created by the 68th Session of the Texas Legislature, the Energy Resource Center for Texas Schools (ERC) is the primary source of facility management services for Texas School districts. The purpose of the ERC is to assist school districts in controlling a major operational expense -- the cost of energy -- through tailoring and implementing services to meet "real world" needs. On-site services available from the ERC range from basic training in analyzing utility bills, tracking energy consumption and costs, and evaluating school energy performance to providing professional technical assistance in identifying and implementing lower cost energy investments. A design assistance program now available from the Center provides energy evaluations at crucial steps in the design process of new facilities to insure that energy-conscious strategies are considered by the architectural firm under contract. Audiences targeted for ERC services include board members, superintendents, directors of maintenance, plant operators, business managers, and energy managers. Assistance provided through workshop settings includes instruction in setting up board-directed energy programs and the sponsoring of network meetings for school energy managers in several areas of the state. Communication is maintained with school energy contacts through the ERC's bimonthly newsletter, Texas School Energy Notes, which is sent to all school districts in the state.

Roberts, M.; Sanders, M.

1988-01-01T23:59:59.000Z

191

Adaptive Discrete Cosine Transform  

Science Conference Proceedings (OSTI)

The theory and performance of the adaptive discrete cosine transform filter is examined. The discrete cosine transform filter is a realization of an FIR filter as the cascade of an all-zero FIR filter with a bank of IIR digital resonators. Each bank ... Keywords: FIR filter, IIR digital resonators, LMS algorithm, adaptive discrete cosine transform filter, adaptive filters, all-zero FIR filter, filter coefficient, frequency, magnitude, phase, transfer function, update method

S. J. Bukowinski; L. Gerhardt; M. Fargues; G. Coutu

1995-10-01T23:59:59.000Z

192

Adaptive Video Retrieval  

E-Print Network (OSTI)

Hopfgartner,F. Villa,R. Urban,J. Jose,J.M. Proceedings of the First International Workshop on Adaptive Information Retrieval pp 28-29

Hopfgartner, F.

193

Safety evaluation for packaging (onsite) for the concrete-shielded RH TRU drum for the 327 Postirradiation Testing Laboratory  

SciTech Connect

This safety evaluation for packaging authorizes onsite transport of Type B quantities of radioactive material in the Concrete Shielded Remote-Handled Transuranic Waste (RH TRU) Drum per HNF-PRO-154, Responsibilities and Procedures for all Hazardous Material Shipments. The drum will be used for transport of 327 Building legacy waste from the 300 Area to a solid waste storage facility on the Hanford Site.

Smith, R.J.

1998-03-31T23:59:59.000Z

194

Safety evaluation for packaging (onsite) for concrete-shielded RHTRU waste drum for the 327 postirradiation testing laboratory  

Science Conference Proceedings (OSTI)

This safety evaluation for packaging authorizes onsite transport of Type B quantities of radioactive material in the Concrete- Shielded Remote-Handled Transuranic Waste (RH TRU) Drum per WHC-CM-2-14, Hazardous Material Packaging and Shipping. The drum will be used for transport of 327 Building legacy waste from the 300 Area to the Transuranic Waste Storage and Assay Facility in the 200 West Area and on to a Solid Waste Storage Facility, also in the 200 Area.

Adkins, H.E.

1996-10-29T23:59:59.000Z

195

Electricity Markets  

NLE Websites -- All DOE Office Websites (Extended Search)

Electricity Markets Electricity Markets Researchers in the electricity markets area conduct technical, economic, and policy analysis of energy topics centered on the U.S. electricity sector. Current research seeks to inform public and private decision-making on public-interest issues related to energy efficiency and demand response, renewable energy, electricity resource and transmission planning, electricity reliability and distributed generation resources. Research is conducted in the following areas: Energy efficiency research focused on portfolio planning and market assessment, design and implementation of a portfolio of energy efficiency programs that achieve various policy objectives, utility sector energy efficiency business models, options for administering energy efficiency

196

Regional comparisons of on-site solar potential in the residential and industrial sectors  

SciTech Connect

Regional and sub-regional differences in the potential development of decentralized solar technologies are studied. Two sectors of the economy were selected for intensive analysis: the residential and industrial sectors. In both investigations, the sequence of analysis follows the same general steps: (1) selection of appropriate prototypes within each land-use sector disaggregated by census region; (2) characterization of the end-use energy demand of each prototype in order to match an appropriate decentralized solar technology to the energy demand; (3) assessment of the energy conservation potential within each prototype limited by land use patterns, technology efficiency, and variation in solar insolation; and (4) evaluation of the regional and sub-regional differences in the land use implications of decentralized energy supply technologies that result from the combination of energy demand, energy supply potential, and the subsequent addition of increasingly more restrictive policies to increase the percent contribution of on-site solar energy. Results are presented and discussed. It is concluded that determining regional variations in solar energy contribution for both the residential and industrial sectors appears to be more dependent upon a characterization of existing demand and conservation potential than regional variations in solar insolation. Local governmental decisions influencing developing land use patterns can significantly promote solar energy use and reduce reliance on non-renewable energy sources. These decisions include such measures as solar access protection through controls on vegetation and on building height and density in the residential sector, and district heating systems and industrial co-location in the manufacturing sector. (WHK)

Gatzke, A.E.; Skewes-Cox, A.O.

1980-10-01T23:59:59.000Z

197

Advanced On-Site Wastewater Treatment and Management Market Study: Volume 1: Assessment of Short-Term Opportunities and Long-Run Pot ential  

Science Conference Proceedings (OSTI)

On-site septic systems have traditionally been considered a temporary solution on the way to sewering. However, the elimination of federal grants for sewers and wastewater treatment plants has brought a new awareness of the high costs and the sometimes adverse environmental consequences of centralized point discharges. At the same time, advances in on-site technologies, including such systems as low-flow water conservation, watertight septic tanks with screens, sand filtration, disinfection, remote monit...

2000-09-27T23:59:59.000Z

198

On-Site Generation Simulation with EnergyPlus for Commercial Buildings  

E-Print Network (OSTI)

with DG investment options and energy tariffs and rates, toend-use energy loads 3 , electricity and natural gas tariffLBNL Tariff Analysis Project) fixed ($/month) energy ($/kWh)

Stadler, Michael; Firestone, Ryan; Curtil, Dimitri; Marnay, Chris

2006-01-01T23:59:59.000Z

199

Optimal selection of on-site generation with combined heat and power applications  

E-Print Network (OSTI)

0.85. The test site load profiles described in this report3.1: Electric-Only Sample Load Profile A.S. Siddiqui et al.Space Heating Sample Load Profile Figure 3.3: Sample Cooling

Siddiqui, Afzal S.; Marnay, Chris; Bailey, Owen; Hamachi LaCommare, Kristina

2004-01-01T23:59:59.000Z

200

Contracting Issues with Renewable Electricity | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Contracting Issues with Renewable Electricity Contracting Issues with Renewable Electricity Contracting Issues with Renewable Electricity October 16, 2013 - 5:08pm Addthis For many Federal agencies integrating renewable energy into a construction project, the technical and contracting issues associated with generating power at the facility are new. This page summarizes the various contracting issues that result from having on-site power generation that is actively interconnected with the power grid instead of using only a back-up generator. Many of these agreements depend on the ownership structure of the renewable energy system. Common agreements associated with a renewable electricity-generation facility include: An interconnection agreement covers the safe connection of the system to the power grid, including provisions for safe design, connection,

Note: This page contains sample records for the topic "adapting onsite electrical" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Policies for Renewable Electricity Use | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Policies for Renewable Electricity Use Policies for Renewable Electricity Use Policies for Renewable Electricity Use October 16, 2013 - 5:12pm Addthis The renewable energy screening should include an assessment of several key utility policies at the facility site. In addition to financial incentives, states and local governments have adopted policies to remove barriers to the use of renewable energy and to facilitate the use of these technologies in a safe and fair manner. These policies are focused on electric-generating technologies and enabling the economic use of on-site power generation at a customer's site. The screening needs to outline the key provisions at the facility site and assess the impact on the use of these technologies at the site under review. Key policies include: Interconnection

202

Hourly Energy Emission Factors for Electricity Generation in the United  

Open Energy Info (EERE)

Hourly Energy Emission Factors for Electricity Generation in the United Hourly Energy Emission Factors for Electricity Generation in the United States Dataset Summary Description Emissions from energy use in buildings are usually estimated on an annual basis using annual average multipliers. Using annual numbers provides a reasonable estimation of emissions, but it provides no indication of the temporal nature of the emissions. Therefore, there is no way of understanding the impact on emissions from load shifting and peak shaving technologies such as thermal energy storage, on-site renewable energy, and demand control. This project utilized GridViewTM, an electric grid dispatch software package, to estimate hourly emission factors for all of the eGRID subregions in the continental United States. These factors took into account electricity imports and exports

203

California Electric Energy Crisis - Electricity Information  

U.S. Energy Information Administration (EIA)

Electricity Information Available Formats; Status of Electric Industry Restructuring Activity in California: html: California State Electricity Profil ...

204

Quantum Electrical Measurements Portal  

Science Conference Proceedings (OSTI)

NIST Home > Quantum Electrical Measurements Portal. Quantum Electrical Measurements Portal. Subject Areas. Electrical ...

2013-03-21T23:59:59.000Z

205

Electric vehicles  

SciTech Connect

Quiet, clean, and efficient, electric vehicles (EVs) may someday become a practical mode of transportation for the general public. Electric vehicles can provide many advantages for the nation's environment and energy supply because they run on electricity, which can be produced from many sources of energy such as coal, natural gas, uranium, and hydropower. These vehicles offer fuel versatility to the transportation sector, which depends almost solely on oil for its energy needs. Electric vehicles are any mode of transportation operated by a motor that receives electricity from a battery or fuel cell. EVs come in all shapes and sizes and may be used for different tasks. Some EVs are small and simple, such as golf carts and electric wheel chairs. Others are larger and more complex, such as automobile and vans. Some EVs, such as fork lifts, are used in industries. In this fact sheet, we will discuss mostly automobiles and vans. There are also variations on electric vehicles, such as hybrid vehicles and solar-powered vehicles. Hybrid vehicles use electricity as their primary source of energy, however, they also use a backup source of energy, such as gasoline, methanol or ethanol. Solar-powered vehicles are electric vehicles that use photovoltaic cells (cells that convert solar energy to electricity) rather than utility-supplied electricity to recharge the batteries. This paper discusses these concepts.

Not Available

1990-03-01T23:59:59.000Z

206

Central Hudson Gas & Electric (Electric) - Commercial Lighting...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

You are here Home Savings Central Hudson Gas & Electric (Electric) - Commercial Lighting Rebate Program Central Hudson Gas & Electric (Electric) - Commercial Lighting Rebate...

207

MidAmerican Energy (Electric) - Commercial EnergyAdvantage Rebate Program |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

MidAmerican Energy (Electric) - Commercial EnergyAdvantage Rebate MidAmerican Energy (Electric) - Commercial EnergyAdvantage Rebate Program MidAmerican Energy (Electric) - Commercial EnergyAdvantage Rebate Program < Back Eligibility Agricultural Commercial Construction Industrial Institutional Nonprofit Schools Savings Category Home Weatherization Commercial Weatherization Heating & Cooling Commercial Heating & Cooling Cooling Other Construction Manufacturing Heat Pumps Appliances & Electronics Commercial Lighting Lighting Water Heating Maximum Rebate Insulation: 70% of cost; ebates exceeding $10,000 require preapproval Variable-Speed Drives: 70% of cost Custom: All project installations with rebates exceeding $20,000 require on-site verification Program Info State Illinois Program Type Utility Rebate Program Rebate Amount

208

2012 National Electricity Forum: February 8-9, 2012 | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

12 National Electricity Forum: February 8-9, 2012 12 National Electricity Forum: February 8-9, 2012 2012 National Electricity Forum: February 8-9, 2012 January 4, 2012 - 11:28am Addthis The 2012 National Electricity Forum will be held on February 8 and 9, 2012, and is sponsored by the DOE Office of Electricity Delivery and Energy Reliability and the National Association of Regulatory Utility Commissioners (NARUC). Online registratin is now closed; participants are welcome to register onsite. A Leading Role The DOE is taking a leading role in this week's National Electricity Forum, with key speakers providing input on a variety of topics. Secretary of Energy Steven Chu and Assistant Secretary for Electricity Delivery and Energy Reliability Patricia Hoffman will join NARUC President David Wright for the keynote discussion on Wednesday morning.

209

Leak test adapter for containers  

DOE Patents (OSTI)

An adapter is provided for facilitating the charging of containers and leak testing penetration areas. The adapter comprises an adapter body and stem which are secured to the container`s penetration areas. The container is then pressurized with a tracer gas. Manipulating the adapter stem installs a penetration plug allowing the adapter to be removed and the penetration to be leak tested with a mass spectrometer. Additionally, a method is provided for using the adapter. The present invention relates generally to leak test adapters, and more particularly to leak test adapters used with containers such as radioactive material shipping containers.

Hallett, B.H.; Hartley, M.S.

1995-12-31T23:59:59.000Z

210

Optical Military Systems Adaptive  

NLE Websites -- All DOE Office Websites (Extended Search)

turbulence in ground-based telescopes or to improve the spatial mode and power of lasers. More recently, Sandia has led the innovation of using adaptive elements, such as...

211

The Climate Adaptation Frontier  

Science Conference Proceedings (OSTI)

Climate adaptation has emerged as a mainstream risk management strategy for assisting in maintaining socio-ecological systems within the boundaries of a safe operating space. Yet, there are limits to the ability of systems to adapt. Here, we introduce the concept of an adaptation frontier , which is defined as a socio-ecological system s transitional adaptive operating space between safe and unsafe domains. A number of driving forces are responsible for determining the sustainability of systems on the frontier. These include path dependence, adaptation/development deficits, values conflicts and discounting of future loss and damage. The cumulative implications of these driving forces are highly uncertain. Nevertheless, the fact that a broad range of systems already persist at the edge of their frontiers suggests a high likelihood that some limits will eventually be exceeded. The resulting system transformation is likely to manifest as anticipatory modification of management objectives or loss and damage. These outcomes vary significantly with respect to their ethical implications. Successful navigation of the adaptation frontier will necessitate new paradigms of risk governance to elicit knowledge that encourages reflexive reevaluation of societal values that enable or constrain sustainability.

Preston, Benjamin L [ORNL

2013-01-01T23:59:59.000Z

212

Property Damage Risk Assessment Scoping Study: for South Texas Project Electric Generating Station  

Science Conference Proceedings (OSTI)

At the request of the South Texas Project Electric Generating Station (STPEGS), EPRI assessed the financial risks of on-site property damage from component failures and accidents and the effectiveness of available insurance in mitigating such risks. This report quantifies the risks of nuclear and nonnuclear accidents and the resulting property damage incurred. The report is a companion document to EPRI's Nuclear Property Insurance Study (TR-108061), which discusses five options for alternate insurance co...

1997-08-12T23:59:59.000Z

213

Electricity Costs  

NLE Websites -- All DOE Office Websites (Extended Search)

Carbon Emissions Caps and the Impact of a Radical Change in Nuclear Electricity Costs journal International Journal of Energy Economics and Policy volume year month chapter...

214

On-Site Generation Simulation with EnergyPlus for Commercial Buildings  

E-Print Network (OSTI)

, time of use demand charges, volumetric natural gas costs, DG variable maintenance costs, and fixed.09 0.09 demand ($/kW month) 25.28 0.00 11.69 0.00 Natural gas fixed ($/month) energy ($/kWh) 0, dependent on a particular site's end-use load profiles, electricity and natural gas tariff structure

215

Electric machine  

SciTech Connect

An interior permanent magnet electric machine is disclosed. The interior permanent magnet electric machine comprises a rotor comprising a plurality of radially placed magnets each having a proximal end and a distal end, wherein each magnet comprises a plurality of magnetic segments and at least one magnetic segment towards the distal end comprises a high resistivity magnetic material.

El-Refaie, Ayman Mohamed Fawzi (Niskayuna, NY); Reddy, Patel Bhageerath (Madison, WI)

2012-07-17T23:59:59.000Z

216

A Fire Risk Breakdown System for Electrical Power Lines in the North of Brazil  

Science Conference Proceedings (OSTI)

Anthropogenic or spontaneous fires (hotspots) are the main causes of unexpected breakdowns of electrical power lines in the North of Brazil. This research has tested, adapted and implemented a pre-operational system aiming to prevent electrical ...

Gutemberg Borges França; Antonio Nascimento de Oliveira; Célia Maria Paiva; Leonardo de Faria Peres; Michael Bezerra da Silva; Luciana Maria Temponi de Oliveira

217

Primer on Use of Multi-Spectral and Infra Red Imaging for On-Site Inspections  

Science Conference Proceedings (OSTI)

The purpose of an On-Site Inspection (OSI) is to determine whether a nuclear explosion has occurred in violation of the Comprehensive Nuclear Test Ban Treaty (CTBT), and to gather information which might assist in identifying the violator (CTBT, Article IV, Paragraph 35) Multi-Spectral and Infra Red Imaging (MSIR) is allowed by the treaty to detect observables which might help reduce the search area and thus expedite an OSI and make it more effective. MSIR is permitted from airborne measurements, and at and below the surface to search for anomalies and artifacts (CTBT, Protocol, Part II, Paragraph 69b). The three broad types of anomalies and artifacts MSIR is expected to be capable of observing are surface disturbances (disturbed earth, plant stress or anomalous surface materials), human artifacts (man-made roads, buildings and features), and thermal anomalies. The purpose of this Primer is to provide technical information on MSIR relevant to its use for OSI. It is expected that this information may be used for general background information, to inform decisions about the selection and testing of MSIR equipment, to develop operational guidance for MSIR use during an OSI, and to support the development of a training program for OSI Inspectors. References are provided so readers can pursue a topic in more detail than the summary information provided here. The following chapters will provide more information on how MSIR can support an OSI (Section 2), a short summary what Multi-Spectral Imaging and Infra Red Imaging is (Section 3), guidance from the CTBT regarding the use of MSIR (Section 4), and a description of several nuclear explosion scenarios (Section 5) and consequent observables (Section 6). The remaining sections focus on practical aspects of using MSIR for an OSI, such as specification and selection of MSIR equipment, operational considerations for deployment of MISR equipment from an aircraft, and the conduct of field exercises to mature MSIR for an OSI. Finally, an appendix provides detail describing the magnitude and spatial extent of the surface shock expected from an underground nuclear explosion. If there is a seismic event or other data to suggest there has been a nuclear explosion in violation of the CTBT, an OSI may be conducted to determine whether a nuclear explosion has occurred and to gather information which may be useful in identifying the party responsible for conducting the explosion. The OSI must be conducted in the area where the event that triggered the inspection request occurred, and the inspected area must not exceed 1,000 square kilometers, or be more than 50 km on aside (CTBT Protocol, Part II, Paragraphs 2 and 3). One of the guiding principles for an inspection is that it be effective, minimally intrusive, timely, and cost-effective [Hawkins, Feb 1998]. In that context, MSIR is one of several technologies that can be used during an aircraft overflight to identify ground regions of high interest in a timely and cost-effective manner. This allows for an optimized inspection on the ground. The primary purpose for MSIR is to identify artifacts and anomalies that might be associated with a nuclear explosion, and to use the location of those artifacts and anomalies to reduce the search area that must be inspected from the ground. The MSIR measurements can have additional utility. The multi-spectral measurements of the ground can be used for terrain classification, which can aid in geological characterization of the Inspected Area. In conditions of where light smoke or haze is present, long-wave infrared imaging can provide better imaging of the ground than is possible with standard visible imagery.

Henderson, J R

2010-10-26T23:59:59.000Z

218

electricity emission factors | OpenEI  

Open Energy Info (EERE)

emission factors emission factors Dataset Summary Description Emissions from energy use in buildings are usually estimated on an annual basis using annual average multipliers. Using annual numbers provides a reasonable estimation of emissions, but it provides no indication of the temporal nature of the emissions. Therefore, there is no way of understanding the impact on emissions from load shifting and peak shaving technologies such as thermal energy storage, on-site renewable energy, and demand control. Source NREL Date Released April 11th, 2011 (3 years ago) Date Updated April 11th, 2011 (3 years ago) Keywords buildings carbon dioxide emissions carbon footprinting CO2 commercial buildings electricity emission factors ERCOT hourly emission factors interconnect nitrogen oxides

219

Engineering and Economic Evaluation of Integrated Wind-Onsite Energy Storage  

Science Conference Proceedings (OSTI)

The purpose of this Electric Power Research Institute project was to investigate the benefits of directly integrated energy storage and wind generation. The ability to store wind energy could provide higher wind farm capacity factors, improved locational marginal prices during high wind periods, and increased production tax credit benefits. The project's Phase I objective was to identify the most promising energy storage (ES) options available at this time. Technologies investigated included many batter...

2011-09-26T23:59:59.000Z

220

Verification of Adaptive Systems  

SciTech Connect

Adaptive systems are critical for future space and other unmanned and intelligent systems. Verification of these systems is also critical for their use in systems with potential harm to human life or with large financial investments. Due to their nondeterministic nature and extremely large state space, current methods for verification of software systems are not adequate to provide a high level of assurance for them. The combination of stabilization science, high performance computing simulations, compositional verification and traditional verification techniques, plus operational monitors, provides a complete approach to verification and deployment of adaptive systems that has not been used before. This paper gives an overview of this approach.

Pullum, Laura L [ORNL; Cui, Xiaohui [New York Institute of Technology (NYIT); Vassev, Emil [Lero – The Irish Software Engineering Research Centre; Hinchey, Mike [Lero – The Irish Software Engineering Research Centre; Rouff, Christopher [Lockheed Martin Corporation; Buskens, Richard [Lockheed Martin Corporation

2012-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "adapting onsite electrical" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Electric moped  

DOE Green Energy (OSTI)

Two electrically powered mopeds were designed and built. These vehicles offer single-person transportation which is convenient, quiet, low-cost, smooth, and pollution-free. The first moped has a 12 volt electrical system. The second has a 24 volt electrical system. They both have top speeds of about 20 miles per hour. They both use transistorized speed controls and deep-discharge, lead-acid batteries. These mopeds were put through a 750 mile test program. In this program, the 12 volt bike had an average range of nine miles. The 24 volt bike, with a smaller battery capacity, had an average range of six miles.

Ferschl, M.S.

1981-02-26T23:59:59.000Z

222

Adaptive sequential controller  

Science Conference Proceedings (OSTI)

An adaptive sequential controller for controlling a circuit breaker or other switching device to substantially eliminate transients on a distribution line caused by closing and opening the circuit breaker. The device adaptively compensates for changes in the response time of the circuit breaker due to aging and environmental effects. A potential transformer provides a reference signal corresponding to the zero crossing of the voltage waveform, and a phase shift comparator circuit compares the reference signal to the time at which any transient was produced when the circuit breaker closed, producing a signal indicative of the adaptive adjustment that should be made. Similarly, in controlling the opening of the circuit breaker, a current transformer provides a reference signal that is compared against the time at which any transient is detected when the circuit breaker last opened. An adaptive adjustment circuit produces a compensation time that is appropriately modified to account for changes in the circuit breaker response, including the effect of ambient conditions and aging. When next opened or closed, the circuit breaker is activated at an appropriately compensated time, so that it closes when the voltage crosses zero and opens when the current crosses zero, minimizing any transients on the distribution line. Phase angle can be used to control the opening of the circuit breaker relative to the reference signal provided by the potential transformer. 15 figs.

El-Sharkawi, M.A.; Xing, J.; Butler, N.G.; Rodriguez, A.

1994-11-01T23:59:59.000Z

223

Plants “remember” drought, adapt  

Science Conference Proceedings (OSTI)

Research carried out at the University of Nebraska-Lincoln (UNL; USA) shows that plants subjected to a previous period of drought learn to deal with the stress owing to their “memories” of the experience. Plants “remember” drought, adapt Inform Magazine

224

Adaptive sequential controller  

DOE Patents (OSTI)

An adaptive sequential controller (50/50') for controlling a circuit breaker (52) or other switching device to substantially eliminate transients on a distribution line caused by closing and opening the circuit breaker. The device adaptively compensates for changes in the response time of the circuit breaker due to aging and environmental effects. A potential transformer (70) provides a reference signal corresponding to the zero crossing of the voltage waveform, and a phase shift comparator circuit (96) compares the reference signal to the time at which any transient was produced when the circuit breaker closed, producing a signal indicative of the adaptive adjustment that should be made. Similarly, in controlling the opening of the circuit breaker, a current transformer (88) provides a reference signal that is compared against the time at which any transient is detected when the circuit breaker last opened. An adaptive adjustment circuit (102) produces a compensation time that is appropriately modified to account for changes in the circuit breaker response, including the effect of ambient conditions and aging. When next opened or closed, the circuit breaker is activated at an appropriately compensated time, so that it closes when the voltage crosses zero and opens when the current crosses zero, minimizing any transients on the distribution line. Phase angle can be used to control the opening of the circuit breaker relative to the reference signal provided by the potential transformer.

El-Sharkawi, Mohamed A. (Renton, WA); Xing, Jian (Seattle, WA); Butler, Nicholas G. (Newberg, OR); Rodriguez, Alonso (Pasadena, CA)

1994-01-01T23:59:59.000Z

225

EIA - State Electricity Profiles  

U.S. Energy Information Administration (EIA)

Trade and Reliability; All Reports ‹ See all Electricity Reports State Electricity Profiles. ... Electric Power Industry Emissions Estimates, 1990 Through 2010:

226

FreedomCAR :electrical energy storage system abuse test manual for electric and hybrid electric vehicle applications.  

DOE Green Energy (OSTI)

This manual defines a complete body of abuse tests intended to simulate actual use and abuse conditions that may be beyond the normal safe operating limits experienced by electrical energy storage systems used in electric and hybrid electric vehicles. The tests are designed to provide a common framework for abuse testing various electrical energy storage systems used in both electric and hybrid electric vehicle applications. The manual incorporates improvements and refinements to test descriptions presented in the Society of Automotive Engineers Recommended Practice SAE J2464 ''Electric Vehicle Battery Abuse Testing'' including adaptations to abuse tests to address hybrid electric vehicle applications and other energy storage technologies (i.e., capacitors). These (possibly destructive) tests may be used as needed to determine the response of a given electrical energy storage system design under specifically defined abuse conditions. This manual does not provide acceptance criteria as a result of the testing, but rather provides results that are accurate and fair and, consequently, comparable to results from abuse tests on other similar systems. The tests described are intended for abuse testing any electrical energy storage system designed for use in electric or hybrid electric vehicle applications whether it is composed of batteries, capacitors, or a combination of the two.

Doughty, Daniel Harvey; Crafts, Chris C.

2006-08-01T23:59:59.000Z

227

Adaptation and adaptability : expectant design for resilience in coastal urbanity  

E-Print Network (OSTI)

What is the nature of and possibility for urban resiliency through adaptation? Adaptation implies responsiveness to phenomena that are disruptive to a system's functioning; it is a willful evolution in response to changed ...

Ruskeepää, Laura A. Delaney (Laura Ashley Delaney)

2011-01-01T23:59:59.000Z

228

A new approach applied to adaptive centralized load shedding scheme  

Science Conference Proceedings (OSTI)

One of major contingencies of an electric power system is due to imbalance between loads and generated power. This leads to instability in the power system and hence to a blackout. A load shedding scheme may be used to avoid such problem by reducing ... Keywords: adaptive load shedding scheme, critical power, power system, threshold power

Hamid Bentarzi; Abderrahmane Ouadi; Nadir Ghout; Farid Maamri; Nikos E. Mastorakis

2009-12-01T23:59:59.000Z

229

Adaptive Header Compression for Wireless Networks Changli Jiao  

E-Print Network (OSTI)

Adaptive Header Compression for Wireless Networks Changli Jiao Department of Electrical without compression. From the standpoint of the communication medium, the channel usage will be improved at a lower speed if the gap between ACKs is too big. This will have two side results. First, the efficiency

Richard III, Golden G.

230

Rapid gravity and gravity gradiometry terrain corrections via an adaptive quadtree mesh discretization  

E-Print Network (OSTI)

Rapid gravity and gravity gradiometry terrain corrections via an adaptive quadtree mesh discretization Kristofer Davis1,2 M. Andy Kass1 Yaoguo Li1 1 Center for Gravity, Electrical, and Magnetic Studies of gravity gradiometry surveys utilising an adaptive quadtree mesh discretization. The data- and terrain

231

Inter-System Software Adapter for Decision Support by Interfacing Disaster Response Platforms & Simulation Platforms  

Science Conference Proceedings (OSTI)

An inter-system adapter design is described which links the web service based DR NEP and WebSimP simulation platforms. The adapter enables the PSS Sincal electrical simulator to share results with the DR NEP which coordinates the data exchange among ... Keywords: disaster, management, interdependencies, infrastructure, web services

Jose Marti; Pranab Kini; Paul Lusina; Antonio Di Pietro; Vittorio Rosato; Baptiste Charnier; Wang Kui

2012-10-01T23:59:59.000Z

232

Adaptive Constraints for Feature Tracking  

Science Conference Proceedings (OSTI)

In this paper extensions to an existing tracking algorithm are described. These extensions implement adaptive tracking constraints in the form of regional upper-bound displacements and an adaptive track smoothness constraint. Together, these ...

K. I. Hodges

1999-06-01T23:59:59.000Z

233

Project RU LlSON COPY ON-SITE RADIOLOGICAL PROGRAMS DURING REENTRY DISILLING THROUGH PRODUCTION TESTING  

Office of Legacy Management (LM)

RU LlSON RU LlSON COPY ON-SITE RADIOLOGICAL PROGRAMS DURING REENTRY DISILLING THROUGH PRODUCTION TESTING FINAL REPOAT EBERLlNE INSTRUMENT CORPORATION Santa Fe, New Mexico Date Published - December 1973 PREPARED FOR THE U. S. ATOMIC ENERGY COMMISSION N E V A D A OPERATIONS OFFICE UNDER CONTRACT NO. AT(26-11-294 DISCLAIMER Portions of this document may be illegible in electronic image products. Images are produced from the best available original document. Project RULISON ON-S1l'E RADIOLOGICAL PROGRAMS D U R I N G R E E N T R Y D R I L L I N G THROUGH PRODUCTION TESTING \ F I N A L REPORT EBERLINE INSTRUMENT CORPORATION . Santa Fe, New Mexico 1 Date Published - December 1973 NEVADA OPERATIONS OFFICE . UNDER CONTRACT NO. AT(26-11-294 NOTICE ~~~~ This report was prepared as an account of work sponsored by the United

234

A Discussion of Procedures and Equipment for the Comprehensive Test Ban Treaty On-Site Inspection Environmental Sampling and Analysis  

SciTech Connect

This paper is intended to serve as a scientific basis to start discussions of the available environmental sampling techniques and equipment that have been used in the past that could be considered for use within the context of the Comprehensive Nuclear-Test-Ban Treaty (CTBT) on-site inspections (OSI). This work contains information on the techniques, equipment, costs, and some operational procedures associated with environmental sampling that have actually been used in the past by the United States for the detection of nuclear explosions. This paper also includes a discussion of issues, recommendations, and questions needing further study within the context of the sampling and analysis of aquatic materials, atmospheric gases, atmospheric particulates, vegetation, sediments and soils, fauna, and drill-back materials.

Wogman, Ned A.; Milbrath, Brian D.; Payne, Rosara F.; Seifert, Carolyn E.; Friese, Judah I.; Miley, Harry S.; Bowyer, Ted W.; Hanlen, Richard C.; Onishi, Yasuo; Hayes, James C.; Wigmosta, Mark S.

2011-02-01T23:59:59.000Z

235

Wackenhut Services, Incorporated: Report from the DOE Voluntary Protection Program onsite review, August 10--14, 1998  

SciTech Connect

This report summarizes the Department of Energy Voluntary Protection Program (DOE-VPP) Review Team`s findings from the five-day onsite evaluation of Wackenhut Services, Inc. (WSI) at Savannah River Site (SRS), conducted August 10-14, 1998. The site was evaluated against the program requirements contained in US Department of Energy Voluntary Protection Program, Part 1: Program Elements to determine its success in implementing the five DOE-VPP tenets. The Team determined that WSI has met in varying degrees, all the tenets of the DOE-VPP. In every case, WSI programs and procedures exceed the level or degree necessary for compliance with existing standards, DOE Orders, and guidelines. In addition, WSI has systematically integrated their occupational safety and health (OSH) program into management and work practices at all levels. WSI`s efforts toward implementing the five major DOE-VPP tenets are summarized.

1999-05-01T23:59:59.000Z

236

Measurement of 37Ar to support technology for On-site Inspection under the Comprehensive Nuclear-Test-Ban Treaty  

E-Print Network (OSTI)

On-Site Inspection (OSI) is a key component of the verification regime for the Comprehensive Nuclear-Test-Ban Treaty (CTBT). Measurements of radionuclide isotopes created by an underground nuclear explosion are a valuable signature of a Treaty violation. Argon-37 is produced from neutron interaction with calcium in soil, 40Ca(n,{\\alpha})37Ar. For OSI, the 35-day half-life of 37Ar provides both high specific activity and sufficient time for completion of an inspection before decay limits sensitivity. This paper presents a low-background internal-source gas proportional counter with an 37Ar measurement sensitivity level equivalent to 45.1 mBq/SCM in whole air.

C. E. Aalseth; A. R. Day; D. A. Haas; E. W. Hoppe; B. J. Hyronimus; M. E. Keillor; E. K. Mace; J. L. Orrell; A. Seifert; V. T. Woods

2010-08-04T23:59:59.000Z

237

Electricity 2011  

U.S. Energy Information Administration (EIA) Indexed Site

Electricity > Soliciting comments on EIA-111 Electricity > Soliciting comments on EIA-111 EIA announces the proposal of Form EIA-111, Quarterly Electricity Imports and Exports Report Released: August 15, 2011 Background On August 11, 2011, a Federal Register Notice was published soliciting comments for the new EIA-111 survey form. The EIA-111, Quarterly Electricity Imports and Exports Report will replace the OE-781R, Monthly Electricity Imports and Exports Report. The OE-781R has been suspended and will be terminated upon the approval of the EIA-111. The OE-781R administered from July 2010 through May 2011, proved complex and confusing for the repondents. As a result, the EIA-111 was developed to more effectively and efficiently collect more accurate and meaningful data. The Paperwork Reduction Act (PRA) of 1995 requires that each Federal agency obtains approval from the Office of Management and Budget (OMB) before undertaking to collect information from ten or more persons, or continuing a collection for which the OMB approval and the OMB control number are about to expire. The approval process, which is popularly known as the "OMB clearance process," is extensive. It requires two Federal Register notices and a detailed application ("supporting statement") to OMB. The first Federal Register Notice was published on August 11, 2011. EIA is prepared to address the comments submitted by each individual.

238

Illinois Municipal Electric Agency - Electric Efficiency Program...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Electric Agency - Electric Efficiency Program < Back Eligibility Agricultural Commercial Industrial Institutional Municipal Utility Nonprofit Schools Savings Category Home...

239

Microchannel Reactor System Design & Demonstration For On-Site H2O2 Production by Controlled H2/O2 Reaction  

Science Conference Proceedings (OSTI)

We successfully demonstrated an innovative hydrogen peroxide (H2O2) production concept which involved the development of flame- and explosion-resistant microchannel reactor system for energy efficient, cost-saving, on-site H2O2 production. We designed, fabricated, evaluated, and optimized a laboratory-scale microchannel reactor system for controlled direct combination of H2 and O2 in all proportions including explosive regime, at a low pressure and a low temperature to produce about 1.5 wt% H2O2 as proposed. In the second phase of the program, as a prelude to full-scale commercialization, we demonstrated our H2O2 production approach by ‘numbering up’ the channels in a multi-channel microreactor-based pilot plant to produce 1 kg/h of H2O2 at 1.5 wt% as demanded by end-users of the developed technology. To our knowledge, we are the first group to accomplish this significant milestone. We identified the reaction pathways that comprise the process, and implemented rigorous mechanistic kinetic studies to obtain the kinetics of the three main dominant reactions. We are not aware of any such comprehensive kinetic studies for the direct combination process, either in a microreactor or any other reactor system. We showed that the mass transfer parameter in our microreactor system is several orders of magnitude higher than what obtains in the macroreactor, attesting to the superior performance of microreactor. A one-dimensional reactor model incorporating the kinetics information enabled us to clarify certain important aspects of the chemistry of the direct combination process as detailed in section 5 of this report. Also, through mathematical modeling and simulation using sophisticated and robust commercial software packages, we were able to elucidate the hydrodynamics of the complex multiphase flows that take place in the microchannel. In conjunction with the kinetics information, we were able to validate the experimental data. If fully implemented across the whole industry as a result of our technology demonstration, our production concept is expected to save >5 trillion Btu/year of steam usage and >3 trillion Btu/year in electric power consumption. Our analysis also indicates >50 % reduction in waste disposal cost and ~10% reduction in feedstock energy. These savings translate to ~30% reduction in overall production and transportation costs for the $1B annual H2O2 market.

Adeniyi Lawal

2008-12-09T23:59:59.000Z

240

Electricity Reliability  

E-Print Network (OSTI)

and reliability of the energy infrastructure, and facilitating recovery from disruptions to energy supply. MajorElectricity Delivery and Energy Reliability High Temperature Superconductivity (HTS) Visualization on the nation's energy delivery system Superconductors are important to meeting the nation's energy needs

Note: This page contains sample records for the topic "adapting onsite electrical" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Modeling Electric Vehicle Benefits Connected to Smart Grids  

DOE Green Energy (OSTI)

Connecting electric storage technologies to smartgrids will have substantial implications in building energy systems. Local storage will enable demand response. Mobile storage devices in electric vehicles (EVs) are in direct competition with conventional stationary sources at the building. EVs will change the financial as well as environmental attractiveness of on-site generation (e.g. PV, or fuel cells). In order to examine the impact of EVs on building energy costs and CO2 emissions in 2020, a distributed-energy-resources adoption problem is formulated as a mixed-integer linear program with minimization of annual building energy costs or CO2 emissions. The mixed-integer linear program is applied to a set of 139 different commercial buildings in California and example results as well as the aggregated economic and environmental benefits are reported. The research shows that considering second life of EV batteries might be very beneficial for commercial buildings.

Stadler, Michael; Marnay, Chris; Mendes, Goncalo; Kloess, Maximillian; Cardoso, Goncalo; Mégel, Olivier; Siddiqui, Afzal

2011-07-01T23:59:59.000Z

242

Modeling Electric Vehicle Benefits Connected to Smart Grids  

NLE Websites -- All DOE Office Websites (Extended Search)

Modeling Electric Vehicle Benefits Connected to Smart Grids Modeling Electric Vehicle Benefits Connected to Smart Grids Title Modeling Electric Vehicle Benefits Connected to Smart Grids Publication Type Conference Paper Year of Publication 2011 Authors Stadler, Michael, Chris Marnay, Ratnesh Sharma, Gonçalo Mendes, Maximillian Kloess, Gonçalo Cardoso, Olivier Mégel, and Afzal S. Siddiqui Conference Name 7th IEEE Vehicle Power and Propulsion Conference Date Published 09/2011 Publisher LBNL Conference Location Chicago, IL Keywords electricity markets and policy group, energy analysis and environmental impacts department Abstract Connecting electric storage technologies to smartgrids will have substantial implications in building energy systems. Local storage will enable demand response. Mobile storage devices in electric vehicles (EVs) are in direct competition with conventional stationary sources at the building. EVs will change the financial as well as environmental attractiveness of on-site generation (e.g. PV, or fuel cells). In order to examine the impact of EVs on building energy costs and CO2 emissions in 2020, a distributed-energy-resources adoption problem is formulated as a mixed-integer linear program with minimization of annual building energy costs or CO2 emissions. The mixed-integer linear program is applied to a set of 139 different commercial buildings in California and example results as well as the aggregated economic and environmental benefits are reported. The research shows that considering second life of EV batteries might be very beneficial for commercial buildings.

243

Benchmarking of RESRAD-OFFSITE : transition from RESRAD (onsite) toRESRAD-OFFSITE and comparison of the RESRAD-OFFSITE predictions with peercodes.  

SciTech Connect

The main purpose of this report is to document the benchmarking results and verification of the RESRAD-OFFSITE code as part of the quality assurance requirements of the RESRAD development program. This documentation will enable the U.S. Department of Energy (DOE) and its contractors, and the U.S. Nuclear Regulatory Commission (NRC) and its licensees and other stakeholders to use the quality-assured version of the code to perform dose analysis in a risk-informed and technically defensible manner to demonstrate compliance with the NRC's License Termination Rule, Title 10, Part 20, Subpart E, of the Code of Federal Regulations (10 CFR Part 20, Subpart E); DOE's 10 CFR Part 834, Order 5400.5, ''Radiation Protection of the Public and the Environment''; and other Federal and State regulatory requirements as appropriate. The other purpose of this report is to document the differences and similarities between the RESRAD (onsite) and RESRAD-OFFSITE codes so that users (dose analysts and risk assessors) can make a smooth transition from use of the RESRAD (onsite) code to use of the RESRAD-OFFSITE code for performing both onsite and offsite dose analyses. The evolution of the RESRAD-OFFSITE code from the RESRAD (onsite) code is described in Chapter 1 to help the dose analyst and risk assessor make a smooth conceptual transition from the use of one code to that of the other. Chapter 2 provides a comparison of the predictions of RESRAD (onsite) and RESRAD-OFFSITE for an onsite exposure scenario. Chapter 3 documents the results of benchmarking RESRAD-OFFSITE's atmospheric transport and dispersion submodel against the U.S. Environmental Protection Agency's (EPA's) CAP88-PC (Clean Air Act Assessment Package-1988) and ISCLT3 (Industrial Source Complex-Long Term) models. Chapter 4 documents the comparison results of the predictions of the RESRAD-OFFSITE code and its submodels with the predictions of peer models. This report was prepared by Argonne National Laboratory's (Argonne's) Environmental Science Division. This work is jointly sponsored by the NRC's Office of Nuclear Regulatory Research and DOE's Office of Environment, Safety and Health and Office of Environmental Management. The approaches and or methods described in this report are provided for information only. Use of product or trade names is for identification purposes only and does not constitute endorsement either by DOE, the NRC, or Argonne.

Yu, C.; Gnanapragasam, E.; Cheng, J.-J.; Biwer, B.

2006-05-22T23:59:59.000Z

244

Electricity Transmission, A Primer  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

the electric power system, 2) gives electricity customers flexibility to diversify the mix of fuels that produces their electricity by giving them access to power plants, 3)...

245

Retail Electricity Competition  

E-Print Network (OSTI)

Reliability and Competitive Electricity Markets” mimeo, MITCSEM WP 130 Retail Electricity Competition * Paul Joskow andwww.ucei.org Retail Electricity Competition ? Paul Joskow †

Joskow, Paul; Tirole, Jean

2004-01-01T23:59:59.000Z

246

Capacity Markets for Electricity  

E-Print Network (OSTI)

Designing Markets for Electricity. Wiley IEEE Press. [25]in the England and Wales Electricity Market”, Power WorkingFelder (1996), “Should Electricity Markets Have a Capacity

Creti, Anna; Fabra, Natalia

2004-01-01T23:59:59.000Z

247

Designing Electricity Auctions  

E-Print Network (OSTI)

market performance in electricity auctions, it appears thatMcSorely (2001) “Regulating Electricity Markets: Experiencethe United Kingdom,” The Electricity Journal, December, 81-

Fabra, Natalia; von der Fehr, Nils-Henrik; Harbord, David

2004-01-01T23:59:59.000Z

248

Designing Electricity Auctions  

E-Print Network (OSTI)

J. (2002) “Why Did Electricity Prices Fall in England &Why Did British Electricity Prices Fall After 1998? ,”The Fall in British Electricity Prices: Market Rules, Market

Fabra, Natalia; von der Fehr, Nils-Henrik; Harbord, David

2004-01-01T23:59:59.000Z

249

Electric Power Annual  

U.S. Energy Information Administration (EIA) Indexed Site

F. Coal: Consumption for Electricity Generation and Useful Thermal Output, by Sector, 2001 - 2011 (Billion Btus) Electric Power Sector Period Total (all sectors) Electric Utilities...

250

High Temperatures & Electricity Demand  

E-Print Network (OSTI)

High Temperatures & Electricity Demand An Assessment of Supply Adequacy in California Trends.......................................................................................................1 HIGH TEMPERATURES AND ELECTRICITY DEMAND.....................................................................................................................7 SECTION I: HIGH TEMPERATURES AND ELECTRICITY DEMAND ..........................9 BACKGROUND

251

Adaptive control for energy conservation  

DOE Green Energy (OSTI)

The objective of this project is to investigate the use of adaptive control concepts in buildings with solar-assisted heating, ventilating, and air-conditioning (HVAC) systems to maintain occupant comfort conditions while minimizing auxiliary energy use. Accomplishing this objective requires an energy management system capable of making sound tradeoffs. Optimal control theory is used along with a system identification technique to provide an adaptable stratgy. The resulting overall approach is known as adaptive optimal control (AOC).

Farris, D.R.

1980-03-01T23:59:59.000Z

252

Adaptive capacity and its assessment  

SciTech Connect

This paper reviews the concept of adaptive capacity and various approaches to assessing it, particularly with respect to climate variability and change. I find that adaptive capacity is a relatively under-researched topic within the sustainability science and global change communities, particularly since it is uniquely positioned to improve linkages between vulnerability and resilience research. I identify opportunities for advancing the measurement and characterization of adaptive capacity by combining insights from both vulnerability and resilience frameworks, and I suggest several assessment approaches for possible future development that draw from both frameworks and focus on analyzing the governance, institutions, and management that have helped foster adaptive capacity in light of recent climatic events.

Engle, Nathan L.

2011-04-20T23:59:59.000Z

253

Central Hudson Gas & Electric (Electric) - Commercial Lighting...  

Open Energy Info (EERE)

icon Twitter icon Central Hudson Gas & Electric (Electric) - Commercial Lighting Rebate Program (New York) This is the approved revision of this page, as well as...

254

Hybrid Electric and Pure Electric vehicle testing  

NLE Websites -- All DOE Office Websites (Extended Search)

Hybrid Electric and Pure Electric Vehicle Testing (Advanced Vehicle Testing Activity) Jim Francfort Discovery Center of Idaho - September 2005 INLCON-05-00693 HEV & EV Testing...

255

NREL: Electricity Integration Research - Electricity, Resources...  

NLE Websites -- All DOE Office Websites (Extended Search)

Electricity, Resources, and Building Systems Integration Center NREL's Electricity, Resources, and Building Systems Integration Center brings together diverse groups of experts...

256

Standard Guide for On-Site Inspection and Verification of Operation of Solar Domestic Hot Water Systems  

E-Print Network (OSTI)

1.1 This guide covers procedures and test methods for conducting an on-site inspection and acceptance test of an installed domestic hot water system (DHW) using flat plate, concentrating-type collectors or tank absorber systems. 1.2 It is intended as a simple and economical acceptance test to be performed by the system installer or an independent tester to verify that critical components of the system are functioning and to acquire baseline data reflecting overall short term system heat output. 1.3 This guide is not intended to generate accurate measurements of system performance (see ASHRAE standard 95-1981 for a laboratory test) or thermal efficiency. 1.4 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine th...

American Society for Testing and Materials. Philadelphia

1987-01-01T23:59:59.000Z

257

Profile-Based Adaption . . .  

E-Print Network (OSTI)

‘Cache decay ’ is a set of leakage-reduction mechanisms that put cache lines that have not been accessed for a specific duration into a low-leakage standby mode. This duration is called the decay interval, and its optimal value varies across applications. This paper provides an extended discussion of the results previously presented in our journal paper [13]. It describes an adaptation technique that analytically finds the optimal decay interval through profiling, and shows that the most important variables required for finding the optimal decay interval can be estimated with a reasonable degree of accuracy using profiling. This work explicitly trades off the leakage power saved in putting both the ‘live ’ and ‘dead ’ lines into standby mode, against its performance and energy costs. It achieves energy savings close to what can be obtained with an omniscient choice of per-benchmark optimal decay interval.

Karthik Sankaranarayanan; Kevin Skadron

2004-01-01T23:59:59.000Z

258

Electrical receptacle  

DOE Patents (OSTI)

The invention is a receptacle for a three prong electrical plug which has either a tubular or U-shaped grounding prong. The inventive receptacle has a grounding prong socket which is sufficiently spacious to prevent the socket from significantly stretching when a larger, U-shaped grounding prong is inserted into the socket, and having two ridges to allow a snug fit when a smaller tubular shape grounding prong is inserted into the socket. The two ridges are made to prevent the socket from expanding when either the U-shaped grounding prong or the tubular grounding prong is inserted.

Leong, R.

1993-06-22T23:59:59.000Z

259

Electrical receptacle  

DOE Patents (OSTI)

The invention is a receptacle for a three prong electrical plug which has either a tubular or U-shaped grounding prong. The inventive receptacle has a grounding prong socket which is sufficiently spacious to prevent the socket from significantly stretching when a larger, U-shaped grounding prong is inserted into the socket, and having two ridges to allow a snug fit when a smaller tubular shape grounding prong is inserted into the socket. The two ridges are made to prevent the socket from expanding when either the U-shaped grounding prong or the tubular grounding prong is inserted.

Leong, R.

1991-12-31T23:59:59.000Z

260

Electrical receptacle  

DOE Patents (OSTI)

The invention is a receptacle for a three prong electrical plug which has either a tubular or U-shaped grounding prong. The inventive receptacle has a grounding prong socket which is sufficiently spacious to prevent the socket from significantly stretching when a larger, U-shaped grounding prong is inserted into the socket, and having two ridges to allow a snug fit when a smaller tubular shape grounding prong is inserted into the socket. The two ridges are made to prevent the socket from expanding when either the U-shaped grounding prong or the tubular grounding prong is inserted.

Leong, Robert (Dublin, CA)

1993-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "adapting onsite electrical" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Electrical receptacle  

DOE Patents (OSTI)

The invention is a receptacle for a three prong electrical plug which has either a tubular or U-shaped grounding prong. The inventive receptacle has a grounding prong socket which is sufficiently spacious to prevent the socket from significantly stretching when a larger, U-shaped grounding prong is inserted into the socket, and having two ridges to allow a snug fit when a smaller tubular shape grounding prong is inserted into the socket. The two ridges are made to prevent the socket from expanding when either the U-shaped grounding prong or the tubular grounding prong is inserted.

Leong, R.

1991-01-01T23:59:59.000Z

262

Adaptive neuro fuzzy controller for adaptive compliant robotic gripper  

Science Conference Proceedings (OSTI)

The requirement for new flexible adaptive grippers is the ability to detect and recognize objects in their environments. It is known that robotic manipulators are highly nonlinear systems, and an accurate mathematical model is difficult to obtain, thus ... Keywords: ANFIS controller, Adaptive compliant gripper, Embedded sensors, Fuzzy logic, Object recognizing

Dalibor Petkovi?; Mirna Issa; Nenad D. Pavlovi?; Lena Zentner; Arko OjbašI?

2012-12-01T23:59:59.000Z

263

Electric Resistance Heating  

Energy.gov (U.S. Department of Energy (DOE))

Electric resistance heat can be supplied by centralized forced-air electric furnaces or by heaters in each room. Electric resistance heating converts nearly all of the energy in the electricity to...

264

Energy Basics: Electric Vehicles  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Photo of an electric bus driving up a hill. Electricity can be used as a transportation fuel to power battery electric vehicles (EVs). EVs store electricity in an energy storage...

265

Technical evaluation of the adequacy of station electric distribution system voltages for the Yankee Rowe Nuclear Power Station  

SciTech Connect

This report documents the technical evaluation of the adequacy of the station electric distribution system voltages for the Yankee Rowe Nuclear Power Station. The evaluation is to determine if the onsite distribution system, in conjunction with the offsite power sources, has sufficient capacity to automatically start and operate all Class 1E loads within the equipment voltage ratings under certain conditions established by the Nuclear Regulatory Commission. The analysis shows that the station electric distribution system has the capacity and capability to supply voltage to the Class 1E equipment with their design ratings for the worst case loading condition.

Selan, J.C.

1981-05-29T23:59:59.000Z

266

Agent-based simulation of electricity markets: a survey of tools  

Science Conference Proceedings (OSTI)

Agent-based simulation has been a popular technique in modeling and analyzing electricity markets in recent years. The main objective of this paper is to study existing agent-based simulation packages for electricity markets. We first provide an overview ... Keywords: Adaptation, Agent-based simulation, Artificial life, Electricity market, Swarm intelligence

Zhi Zhou; Wai Kin Chan; Joe H. Chow

2007-12-01T23:59:59.000Z

267

Computational Intelligence Techniques for a Smart Electric Grid of the Future  

Science Conference Proceedings (OSTI)

The electric grid of the future is required to become smarter so as to provide an affordable, reliable, and sustainable supply of electricity. Under such circumstances, considerable research activities have been carried out in the U.S. and Europe to ... Keywords: Adaptive and Self-Healing Systems, Communications, Computational Intelligence, Information Infrastructure, Learning, Smart Electric Grid

Zhenhua Jiang

2009-05-01T23:59:59.000Z

268

A uniform price auction with locational price adjustments for competitive electricity markets  

E-Print Network (OSTI)

A uniform price auction with locational price adjustments for competitive electricity markets in an electricity context requires that the offers used in the auction reflect the appropriate locational price necessary to adapt the Uniform Price auction to an electricity transmission system which takes into account

269

Suppressant: Electric Fields  

Science Conference Proceedings (OSTI)

*. Bookmark and Share. Suppressant:Electric Fields. Fire Extinguishment of Pool Flames by Means of a DC electric Field.. ...

2011-11-04T23:59:59.000Z

270

Concrete Electrical Conductivity Test  

Science Conference Proceedings (OSTI)

Concrete Electrical Conductivity Test. Description/Summary: ... Details. Type of software: Virtual concrete electrical conductivity test. Authors: ...

2013-06-11T23:59:59.000Z

271

EIA - State Electricity Profiles  

U.S. Energy Information Administration (EIA)

Greenhouse gas data, voluntary report- ing, electric power plant emissions. Highlights ... Generation and thermal output; Electric power plants generating capacity;

272

Electric Power Annual  

U.S. Energy Information Administration (EIA)

Electric Power Sector ; Period Total (all sectors) Electric Utilities Independent Power Producers Commercial Sector Industrial Sector; Annual Totals: ...

273

Electricity Market Module  

Reports and Publications (EIA)

Documents the Electricity Market Module as it was used for the Annual Energy Outlook 2013. The Electricity Market Module (EMM) is the electricity supply component of the National Energy Modeling System (NEMS). The EMM represents the generation, transmission, and pricing of electricity. It consists of four submodules: the Electricity Capacity Planning (ECP) Submodule, the Electricity Fuel Dispatch (EFD) Submodule, the Electricity Finance and Pricing (EFP) Submodule, and the Electricity Load and Demand (ELD) Submodule.

Jeff Jones

2013-07-24T23:59:59.000Z

274

Electric Power Metrology Portal  

Science Conference Proceedings (OSTI)

... Electric Power Metrology and the Smart Grid Our country's way of life depends on the electric power distribution system. ...

2012-12-26T23:59:59.000Z

275

Interim On-Site Storage of Low-Level Waste: Volume 4, Part 3: Waste Container Closures, Seals, and Gas Vents  

Science Conference Proceedings (OSTI)

This volume of the Interim On-Site Storage report series supplements Volume 4, Part 1, which includes an extensive methodology and detailed information on the types and availability of low-level waste (LLW) containers and container coatings for extended storage. Part 2, soon to be published, addresses monitoring and inspection requirements for stored LLW containers. Part 3 continues the series by providing detailed guidance on container closures, seals, and gas vents, including performance goals and key ...

1993-11-11T23:59:59.000Z

276

Interim On-Site Storage of Low-Level Waste: Volume 3, Part 2: User's Manual and Lotus Spreadsheet for Estimating LLW Volumes and Act ivities  

Science Conference Proceedings (OSTI)

This volume of the "Interim On-Site Storage" report series supplements Volume 3, Part 1, "Waste Volume Projections and Data Management." Because that volume includes an extensive methodology and a number of worksheets requiring many calculations, users requested a computer program for easily storing, managing, and manipulating applicable data. Volume 3, Part 2 consists of a user's manual and a Lotus spreadsheet macro to meet this utility need.

1993-11-01T23:59:59.000Z

277

Adaptive navigation for autonomous robots  

Science Conference Proceedings (OSTI)

In many robotic exploration missions, robots have to learn specific policies that allow them to: (i) select high level goals (e.g., identify specific destinations), (ii) navigate (reach those destinations), (iii) and adapt to their environment (e.g., ... Keywords: Learning, evolution, Learning, neural networks, Learning, single agent, Robotics, adaptation

Matt Knudson; Kagan Tumer

2011-06-01T23:59:59.000Z

278

Tightfit: adaptive parallelization with foresight  

Science Conference Proceedings (OSTI)

Irregular applications often exhibit data-dependent parallelism: Different inputs, and sometimes also different execution phases, enable different levels of parallelism. These changes in available parallelism have motivated work on adaptive concurrency ... Keywords: STM, adaptive software parallelization, data-dependent parallelism, irregular applications, offline learning

Omer Tripp; Noam Rinetzky

2013-08-01T23:59:59.000Z

279

Adaptive kernel principal component analysis  

Science Conference Proceedings (OSTI)

An adaptive kernel principal component analysis (AKPCA) method, which has the flexibility to accurately track the kernel principal components (KPC), is presented. The contribution of this paper may be divided into two parts. First, KPC are recursively ... Keywords: Adaptive method, Kernel principal component, Kernel principal component analysis, Non-stationary data, Recursive algorithm

Mingtao Ding; Zheng Tian; Haixia Xu

2010-05-01T23:59:59.000Z

280

Amplitude variations on the Extreme Adaptive Optics testbed  

Science Conference Proceedings (OSTI)

High-contrast adaptive optics systems, such as those needed to image extrasolar planets, are known to require excellent wavefront control and diffraction suppression. At the Laboratory for Adaptive Optics on the Extreme Adaptive Optics testbed, we have already demonstrated wavefront control of better than 1 nm rms within controllable spatial frequencies. Corresponding contrast measurements, however, are limited by amplitude variations, including those introduced by the micro-electrical-mechanical-systems (MEMS) deformable mirror. Results from experimental measurements and wave optic simulations of amplitude variations on the ExAO testbed are presented. We find systematic intensity variations of about 2% rms, and intensity variations with the MEMS to be 6%. Some errors are introduced by phase and amplitude mixing because the MEMS is not conjugate to the pupil, but independent measurements of MEMS reflectivity suggest that some error is introduced by small non-uniformities in the reflectivity.

Evans, J; Thomas, S; Dillon, D; Gavel, D; Phillion, D; Macintosh, B

2007-08-14T23:59:59.000Z

Note: This page contains sample records for the topic "adapting onsite electrical" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Electrical Safety  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

NOT MEASUREMENT NOT MEASUREMENT SENSITIVE DOE HANDBOOK ELECTRICAL SAFETY DOE-HDBK-1092-2013 July 2013 Superseding DOE-HDBK-1092-2004 December 2004 U.S. Department of Energy AREA SAFT Washington, D.C.20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. DOE-HDBK-1092-2013 Available on the Department of Energy Technical Standards Program Web site at http://www.hss.doe.gov/nuclearsafety/techstds/ ii DOE-HDBK-1092-2013 FOREWORD 1. This Department of Energy (DOE) Handbook is approved for use by the Office of Health, Safety and Security and is available to all DOE components and their contractors. 2. Specific comments (recommendations, additions, deletions, and any pertinent data) to enhance this document should be sent to: Patrick Tran

282

The non-proliferation experiment and gas sampling as an on-site inspection activity: A progress report  

SciTech Connect

The Non-proliferation Experiment (NPE) is contributing to the development of gas sampling methods and models that may be incorporated into future on-site inspection (OSI) activities. Surface gas sampling and analysis, motivated by nuclear test containment studies, have already demonstrated the tendency for the gaseous products of an underground nuclear test to flow hundreds of meters to the surface over periods ranging from days to months. Even in the presence of a uniform sinusoidal pressure variation, there will be a net flow of cavity gas toward the surface. To test this barometric pumping effect at Rainier Mesa, gas bottles containing sulfur hexaflouride and {sup 3}He were added to the pre-detonation cavity for the 1 kt chemical explosives test. Pre-detonation measurements of the background levels of both gases were obtained at selected sites on top of the mesa. The background levels of both tracers were found to be at or below mass spectrographic/gas chromatographic sensitivity thresholds in the parts-per-trillion range. Post-detonation, gas chromatographic analyses of samples taken during barometric pressure lows from the sampling sites on the mesa indicate the presence of significant levels (300--600 ppt) of sulfur hexaflouride. However, mass spectrographic analyses of gas samples taken to date do not show the presence of {sup 3}He. To explain these observations, several possibilities are being explored through additional sampling/analysis and numerical modeling. For the NPE, the detonation point was approximately 400 m beneath the surface of Rainier Mesa and the event did not produce significant fracturing or subsidence on the surface of the mesa. Thus, the NPE may ultimately represent an extreme, but useful example for the application and tuning of cavity gas detection techniques.

Carrigan, C.R.

1994-03-01T23:59:59.000Z

283

Adaptive Markets and the New World Order  

E-Print Network (OSTI)

In the adaptive markets hypothesis (AMH) intelligent but fallible investors learn from and adapt to changing economic environments. This implies that markets are not always efficient but are usually competitive and adaptive, ...

Lo, Andrew W.

284

Integration of photovoltaic units into electric utility grids: experiment information requirements and selected issues  

SciTech Connect

A number of investigations have led to the recognition of technical, economic, and institutional issues relating to the interface between solar electric technologies and electric utility systems. These issues derive from three attributes of solar electric power concepts, including (1) the variability and unpredictability of the solar resources, (2) the dispersed nature of those resources which suggest the deployment of small dispersed power units, and (3) a high initial capital cost coupled with relatively low operating costs. An important part of the DOE programs to develop new source technologies, in particular photovoltaic systems, is the experimental testing of complete or nearby complete power units. These experiments provide an opportunity to examine operational and integration issues which must be understood before widespread commercial deployment of these technologies can be achieved. Experiments may also be required to explicitly examine integration, operational, and control aspects of single and multiple new source technology power units within a utility system. An identification of utility information requirements, a review of planned experiments, and a preliminary determination of additional experimental needs and opportunities are presented. Other issues discussed include: (1) the impacts of on-site photovoltaic units on load duration curves and optimal generation mixes are considered; (2) the impacts of on-site photovoltaic units on utility production costs, with and without dedicated storage and with and without sellback, are analyzed; and (3) current utility rate structure experiments, rationales, policies, practices, and plans are reviewed.

1980-09-01T23:59:59.000Z

285

MHD: direct channel from heat to electricity  

SciTech Connect

Magnetohydrodynamics (MHD) combined with conventional power generation is promising, but several engineering and technological problems must be solved before it can compete in the electric utility market. A combined MHD topping cycle and steam-electric bottoming cycle would raise the efficiency of a coal-fired plant from 35 to as high as 50 percent. Coal requirements would be lowered and internal sulfur oxide control is possible. Some of the components for MHD generation can be adapted from industrial applications and are already available, but many new components must be designed. Schematic drawings illustrate the engineering complexities of an MHD plant. (DCK)

Lihach, N.; Zygielbaum, P.; Lowenstein, A.

1980-04-01T23:59:59.000Z

286

African Adaptation Programme | Open Energy Information  

Open Energy Info (EERE)

Adaptation Programme Adaptation Programme Jump to: navigation, search Logo: African Adaptations Programme Name African Adaptations Programme Agency/Company /Organization United Nations Development Programme, Government of Japan Topics Adaptation, Finance, Implementation, Policies/deployment programs Website http://www.undp-adaptation.org References AAP[1] Overview "UNDP, with funding from the Government of Japan, recently launched a new programme that uses an innovative approach to climate change adaptation in Africa. Under this programme, UNDP will assist 21 African countries in implementing integrated and comprehensive adaptation actions and resilience plans. The projects will ensure that national development processes incorporate climate change risks and opportunities to secure development gains under a

287

A Dynamic Platform for Runtime Adaptation  

E-Print Network (OSTI)

We present a middleware platform for assembling pervasive applications that demand fault-tolerance and adaptivity in distributed, dynamic environments. Unlike typical adaptive middleware approaches, in which sophisticated ...

Pham, Hubert

288

Adaptive Materials Inc | Open Energy Information  

Open Energy Info (EERE)

Zip MI 48108 Product Adaptive Materials Inc (AMI) is a developer of portable fuel cell technology. References Adaptive Materials Inc1 LinkedIn Connections CrunchBase...

289

Mainstreaming Climate Change Adaptation into Development Planning...  

Open Energy Info (EERE)

Mainstreaming Climate Change Adaptation into Development Planning: A Guide for Practitioners Jump to: navigation, search Tool Summary Name: Mainstreaming Climate Change Adaptation...

290

NETL: Onsite Research  

NLE Websites -- All DOE Office Websites (Extended Search)

High-Performance Computer Clusters High-Performance Computer Clusters High-performance computing infrastructure and partnerships with regional science consortiums allow NETL scientists to determine a wide range of physical and chemical properties – from nanoscale molecular studies to the feasibility of commercial-scale power plants. Computer modeling provides answers where actual experimental data would be difficult and costly to obtain. For example, computer models simulating a proposed coal-based transport gasifier plant are helping to address scale-up design and performance issues before the plant becomes operational. Computational chemistry analysis allows for the screening of specific materials for specific purposes, such as future hydrogen production. Three computer clusters (256-CPU, 232-CPU and 128-CPU) at NETL compare to supercomputers listed in the top 500 in the world.

291

NETL: Onsite Research  

NLE Websites -- All DOE Office Websites (Extended Search)

Reciprocating Engine Laboratory Reciprocating Engine Laboratory NETL's reciprocating engine laboratory focuses on research to enable high efficiency, cleaner burning engines for America 's future. Some of the laboratory's activities are development of laser spark ignition systems, hydrogen engine operation, partial oxidation engine operation, and diesel engine particulate studies. Researchers in NETL's Office of Science and Engineering Research investigate end-use applications for hydrogen fuel in reciprocating engines, as well as gas turbines and fuel cell technologies in support of DOE's goal to develop strategies for reduced carbon emissions. The use of hydrogen in reciprocating engines also offers the potential for substantial reductions in NO x emissions and provides a platform for power generation from future coal-derived hydrogen fuels.

292

NETL: Onsite Research  

NLE Websites -- All DOE Office Websites (Extended Search)

Manometric Sorption Test Facility Manometric Sorption Test Facility One of today's pressing issues associated with fossil fuel consumption is how to curb greenhouse gas emissions, chiefly CO2. NETL research focuses on ways to capture CO2 from power plant fuel streams and flue stack emissions, and safely store (or sequester) it into geological formations such as coal bed strata , natural gas fields, or saline formations. NETL's Manometric Sorption Test Facility aids these efforts by applying elevated temperature (from 55ºC to 300ºC) and pressure (up to 3,000 psig) to coal samples. Under these conditions, researchers study changes to the CO2 or other fluids being absorbed or adsorbed by the sample, all with a precision of 0.1 psi. In this manner, the sorbent capacity of a particular coal sample can be calculated and its usefulness for future carbon sequestration can be gauged.

293

NETL: Onsite Research  

NLE Websites -- All DOE Office Websites (Extended Search)

Coal By-Products Laboratories Coal By-Products Laboratories As part of NETL's focus on clean fossil power systems, the Coal By-products Laboratories are dedicated to resolving environmental issues associated with residues and by-products from coal combustion. These facilities provide valuable data about Coal Utilization By-products (CUB) from both conventional and advanced power plants. Data from these laboratories are able to show improvements inherent in new combustion technologies compared to conventional plants, with respect to the nature of combustion residues and CUBs. Under current practice, power plant operators collect residues and safely dispose of them or recover them for sale and re-use. Developing more effective procedures for using and disposing of these materials requires accurate information on the potential for these materials to leach into soil after disposal, and the chemical and physical characteristics of the residues. The data NETL has collected through this research has provided important science that supports regulatory decisions related to CUB.

294

NETL: Onsite Research  

NLE Websites -- All DOE Office Websites (Extended Search)

Geomechanics and Flow Laboratory Geomechanics and Flow Laboratory NETL's Geomechanics and Flow Laboratory is a multi-functional, state-of-the-art facility that performs a wide spectrum of geological studies and provides an experimental basis for modeling of various subsurface phenomena and processes. This includes, but is not limited to: long term (months or even years) exposure of geological samples to specific conditions (for example, CO2 saturation of samples at elevated pressure and temperature); and the study of various geomechanical properties and behavior of fluids in the samples, including fluid-solid and fluid-fluid physical and chemical interactions. The laboratory has a wide range of tools and instruments to ensure a complete cycle of scientific studies: from preparation of representative samples, through the preliminary measurements of basic properties, to the advanced investigation of the processes of interest under simulated subsurface conditions.

295

NETL: Onsite Research  

NLE Websites -- All DOE Office Websites (Extended Search)

Autoclave Test Facility Autoclave Test Facility To help meet a national strategic commitment to clean power generation, NETL is developing a technology base for tomorrow's highly efficient, near-zero-emissions power plants. Environmental and geosciences researchers perform laboratory-scale studies of solid, liquid, and gaseous flows and their interactions. These studies may be performed, for example, to determine the suitability of flue gases for capture and storage (sequestration) in industrial wastes after release from coal fired power plants. NETL has available a wide range of analytical and diagnostic instrumentation to support these studies. Half-liter and one-liter continuously stirred autoclave reactors are ideal for investigations involving gas/liquid or gas/slurry interactions, and are equipped with CO2, SO2, and flue gas feed lines. Each of these units is manufactured by Progressive Equipment Corporation and has a pressure rating of 6,000 psig @ 650ºF. The one-liter reactor is equipped with a high-pressure pH meter capable of measurement at pressures of up to 900 psi, and is configured with an in-situ pH meter. A simplified schematic representation of the one-liter reactor apparatus is shown below.

296

NETL: Onsite Research  

NLE Websites -- All DOE Office Websites (Extended Search)

Hydrogen Separation Facilities Hydrogen Separation Facilities NETL is working to help produce and deliver hydrogen from fossil fuels including coal in commercially applicable, environmentally acceptable ways. To achieve this strategic national goal, advanced hydrogen separation technologies are needed to supply tomorrow's energy and transportation systems with affordable hydrogen fuel. NETL's Hydrogen Separation Group investigates, evaluates, and develops hydrogen separation membranes and materials. Researchers are focused on developing stable and robust membranes that are suitable for the rapid, selective removal of hydrogen from mixed gas streams. These membranes also must be resistant to chemical impurities such as sulfur, an abundant component of coal and a key feedstock for producing hydrogen.

297

NETL: Onsite Research  

NLE Websites -- All DOE Office Websites (Extended Search)

Fluidization Research: Multiphase Flow/Gas-Solid Transport Laboratory Fluidization Research: Multiphase Flow/Gas-Solid Transport Laboratory NETL's research, development, and demonstration initiatives are leading to improved operations of coal-based power systems, and future power supplies that are environmentally clean and economically affordable. One method NETL researchers are using is advanced computational and experimental research, which is helping to develop novel technologies, including transport gasifiers, circulating fluidized-bed combustors, and hot gas desulfurization. Enhanced computational capabilities are leading to major improvements in power plant efficiency, and therefore to reduced emissions. Transport gasifier and MFIX showing particle trajectories and oxygen concentration. MFIX simulations complement testing and development at the DOE demonstration Power System Development Facility (PSDF) in Wilsonville, Alabama (shown above). Coal and recycled materials feed into the lower mixing zone of the plant's circulating fluidized-bed. The validated simulation model is currently being used to design a commercial-scale unit.

298

NETL: Onsite Research  

NLE Websites -- All DOE Office Websites (Extended Search)

Sorbent and Catalyst Preparation Facilities Sorbent and Catalyst Preparation Facilities NETL researchers are seeking technical solutions to pressing problems related to fossil fuel extraction, processing, and utilization. To this end, laboratory-scale facilities are used to prepare, test, and analyze sorbents and catalysts used in fixed-, moving-, and fluid-bed reactors — three types of reactors often used in advanced fossil-fueled power plants. Equipment in these facilities is also available for standard American Society for Testing and Materials (ASTM) attrition tests, crush measurements, and particle size analysis to confirm the suitability of the sorbents and catalysts for their intended applications. NETL researchers use these facilities in conjunction with facilities for sorbent/catalyst bench-scale testing and for in-situ (in-place) reaction studies. In 2000, NETL received an R&D 100 Award for its RSV-1 Regenerable Desulfurization Sorbent. The process for preparation of this sorbent has been patented, licensed, and published.

299

NETL: Onsite Research  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy System Dynamics Division - The Hybrid Performance Facility Energy System Dynamics Division - The Hybrid Performance Facility The Hybrid Performance Facility — called the Hyper facility — is now fully operational at the Department of Energy's National Energy Technology Laboratory (NETL). This one-of-a-kind facility, developed by NETL's Office of Science and Technology, will be used to develop control strategies for the reliable operation of fuel cell/turbine hybrids. - NETL's Fuel Cell/Turbine Hybrid Facility - The Hyper facility allows assessment of dynamic control and performance issues in fuel cell/turbine hybrid systems. Combined systems of turbines and fuel cells are expected to meet power efficiency targets that will help eliminate, at competitive costs, environmental concerns associated with the use of fossil fuels for

300

NETL: Onsite Research  

NLE Websites -- All DOE Office Websites (Extended Search)

Device Scale Modeling Device Scale Modeling Device Scale Modeling (DSM) at NETL is helping to overcome technical barriers associated with developing next-generation fossil energy technologies and processes. This research facility uses state-of-the-art, high-speed computing resources to verify computational fluid dynamics (CFD) models used to study coal gasifiers, gas turbine combustors, solid oxide fuel cell (SOFC) systems, and liquefied natural gas plumes, as well as mercury capture technologies. DSM research is helping to move advanced visualization and high-performance computing models from researchers' computer screens to actual laboratory experiments and pilot testing. The DSM group develops models that can be integrated into a wide range of simulation technology, including Advanced Process Engineering Co-Simulator (APECS) and Multiphase Flow with Interphase eXchanges (MFIX). These simulators are enabling researchers to model and understand the behavior of individual components within advanced power generation systems.

Note: This page contains sample records for the topic "adapting onsite electrical" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

NETL: Onsite Research  

NLE Websites -- All DOE Office Websites (Extended Search)

Fluid-Bed Gasifier/Modular Gas Cleanup Rig Fluid-Bed Gasifier/Modular Gas Cleanup Rig NETL is developing a technology base for tomorrow's highly efficient, near-zero-emissions power plants including FutureGen. One of the promising technologies NETL is pursuing is advanced fluidized-bed combustion (FBC). Pressurized FBC (PFBC) systems use a mixture of burning coal, a sorbent such as limestone or dolomite, and jets of air to produce a high-pressure gas stream at temperatures that can drive a gas turbine. Steam generated from the heat in the fluidized bed may be sent to a steam turbine, creating a highly efficient combined-cycle system. Removing and recovering particulates and contaminants from the gas and steam are accomplished in treatment vessels once combustion has occurred. PFBC may also play a role in hydrogen fuel production.

302

NETL: Onsite Research  

NLE Websites -- All DOE Office Websites (Extended Search)

High-Pressure Combustion Facility High-Pressure Combustion Facility NETL's High-Pressure Combustion Facility is a unique resource within the National Laboratories system. It provides the fuel test capabilities needed to evaluate new high-pressure, high-temperature hydrogen turbine combustion concepts that will be required in order to meet national goals for the FutureGen initiative. FutureGen-type power systems will require gas turbine combustion systems capable of burning hydrogen or hydrogen-rich fuels with high efficiency and with low nitrogen oxide (NOx) emissions of 2 parts per million by volume (ppmv) or less. NETL's researchers are developing alternative methods, sensors, and control capabilities necessary to reach stable combustion under demanding conditions and thereby meet these emissions targets.

303

NETL: Onsite Research  

NLE Websites -- All DOE Office Websites (Extended Search)

ensures optimal power plant performance by matching physical properties and reaction rates in both types of models. APECS is playing a key role in the design of FutureGen, an...

304

NETL: Onsite Research  

NLE Websites -- All DOE Office Websites (Extended Search)

in freshwater and saltwater environments. Understanding the physical, chemical, and thermodynamic characteristics of CO2 in such environments is necessary in order to develop...

305

NETL: Onsite Research  

NLE Websites -- All DOE Office Websites (Extended Search)

of Methane to Higher Hydrocarbons, U.S. Patent No. 5177294, Jan. 1993. Licenses: Sud Chemie, Inc. (formerly United Catalysts, Inc. UCI) - A license was signed with UCI to...

306

NETL: Onsite Research  

NLE Websites -- All DOE Office Websites (Extended Search)

phase Cold vapor atomic absorption spectrophotometer analyzes spent sorbent Operating temperature: ambient to 750F For more information, contact Evan Granite Evan Granite in Lab...

307

NETL: Onsite Research  

NLE Websites -- All DOE Office Websites (Extended Search)

to cutting edge technologies, including CO2 storage and energy-efficient fossil fuel utilization. It operates in conjunction with facilities for sorbentcatalyst bench-scale...

308

NETL: Onsite Research  

NLE Websites -- All DOE Office Websites (Extended Search)

technique also has been shown effective in enhancing oil recovery and displacing coal bed methane. The CT Scanner Laboratory provides imaging data that can be used for computer...

309

On-Site Services  

Science Conference Proceedings (OSTI)

... the Boulder Laboratories Employees Association ... a variety of health services including emergency ... emergency ambulance service; administration of ...

2010-12-21T23:59:59.000Z

310

NETL: Onsite Research  

NLE Websites -- All DOE Office Websites (Extended Search)

tomorrow's systems to perform with near-zero emissions. Highly efficient combustion of fossil fuels is essential to achieving clean power generation, a national strategic goal....

311

NETL: Onsite Research  

NLE Websites -- All DOE Office Websites (Extended Search)

using analytical instruments to study in-situ (in-place) reactions of solid and gaseous fossil fuels such as coal and coal derivatives. These studies are important to developing...

312

NETL: Onsite Research  

NLE Websites -- All DOE Office Websites (Extended Search)

and military applications. Researchers can evaluate alternative solid oxide fuel cell (SOFC) technologies with respect to energy output and efficiency. A range of system-level...

313

NETL: Onsite Research  

NLE Websites -- All DOE Office Websites (Extended Search)

There, scientists investigate theoretical and fundamental phenomena in support of fossil fuel program requirements and advanced technology development. Researchers use these...

314

NETL: Onsite Research  

NLE Websites -- All DOE Office Websites (Extended Search)

used to demonstrate visualization capabilities at conferences. The system consists of a passive stereo screen that is six-feet wide and four-feet high. The screen and frame are...

315

Electric Vehicle Grid Integration for Sustainable Military Installations (Presentation), National Renewable Energy Laboratory (NREL)  

NLE Websites -- All DOE Office Websites (Extended Search)

Electric Vehicle Grid Integration for Electric Vehicle Grid Integration for Sustainable Military Installations NDIA Joint Service Power Expo Mike Simpson Mike.Simpson@NREL.gov 5 May 2011 NREL/PR-5400-51519 NATIONAL RENEWABLE ENERGY LABORATORY Agenda 2 1. NREL Transportation Research 2. Net Zero Energy Installations (NZEI) 3. Fort Carson as a Case Study - Vehicles On-Site - Utility Operations - Vehicle Charge Management 4. Full Fleet Simulation 5. Continuing Work NATIONAL RENEWABLE ENERGY LABORATORY NREL is the only national laboratory solely dedicated to advancing renewable energy and energy efficiency. Our employees are committed to building a cleaner, sustainable world. Photo Credits: NREL 3 NATIONAL RENEWABLE ENERGY LABORATORY What is Electric Vehicle Grid Integration (EVGI)? 4 Cross Cutting Enablers Grid / Renewables

316

Table 11.2 Electricity: Components of Net Demand, 2010;  

U.S. Energy Information Administration (EIA) Indexed Site

2 Electricity: Components of Net Demand, 2010; 2 Electricity: Components of Net Demand, 2010; Level: National and Regional Data; Row: Values of Shipments and Employment Sizes; Column: Electricity Components; Unit: Million Kilowatthours. Sales and Net Demand Economic Total Onsite Transfers for Characteristic(a) Purchases Transfers In(b) Generation(c) Offsite Electricity(d) Total United States Value of Shipments and Receipts (million dollars) Under 20 91,909 Q 1,406 194 93,319 20-49 86,795 81 2,466 282 89,060 50-99 90,115 215 2,593 1,115 91,808 100-249 124,827 347 11,375 5,225 131,324 250-499 116,631 2,402 24,079 5,595 137,516 500 and Over 225,242 6,485 91,741 20,770 302,699 Total 735,520 9,728 133,661 33,181 845,727 Employment Size Under 50

317

Distributed Generation Dispatch Optimization under VariousElectricity Tariffs  

Science Conference Proceedings (OSTI)

The on-site generation of electricity can offer buildingowners and occupiers financial benefits as well as social benefits suchas reduced grid congestion, improved energy efficiency, and reducedgreenhouse gas emissions. Combined heat and power (CHP), or cogeneration,systems make use of the waste heat from the generator for site heatingneeds. Real-time optimal dispatch of CHP systems is difficult todetermine because of complicated electricity tariffs and uncertainty inCHP equipment availability, energy prices, and system loads. Typically,CHP systems use simple heuristic control strategies. This paper describesa method of determining optimal control in real-time and applies it to alight industrial site in San Diego, California, to examine: 1) the addedbenefit of optimal over heuristic controls, 2) the price elasticity ofthe system, and 3) the site-attributable greenhouse gas emissions, allunder three different tariff structures. Results suggest that heuristiccontrols are adequate under the current tariff structure and relativelyhigh electricity prices, capturing 97 percent of the value of thedistributed generation system. Even more value could be captured bysimply not running the CHP system during times of unusually high naturalgas prices. Under hypothetical real-time pricing of electricity,heuristic controls would capture only 70 percent of the value ofdistributed generation.

Firestone, Ryan; Marnay, Chris

2007-05-01T23:59:59.000Z

318

Table 11.1 Electricity: Components of Net Demand, 2010;  

U.S. Energy Information Administration (EIA) Indexed Site

1.1 Electricity: Components of Net Demand, 2010; 1.1 Electricity: Components of Net Demand, 2010; Level: National and Regional Data; Row: NAICS Codes; Column: Electricity Components; Unit: Million Kilowatthours. Total Sales and Net Demand NAICS Transfers Onsite Transfers for Code(a) Subsector and Industry Purchases In(b) Generation(c) Offsite Electricity(d) Total United States 311 Food 75,652 21 5,666 347 80,993 3112 Grain and Oilseed Milling 16,620 0 3,494 142 19,972 311221 Wet Corn Milling 7,481 0 3,213 14 10,680 31131 Sugar Manufacturing 1,264 0 1,382 109 2,537 3114 Fruit and Vegetable Preserving and Specialty Foods 9,258 0 336 66 9,528 3115 Dairy Products 9,585 2 38 22 9,602 3116 Animal Slaughtering and Processing 20,121 15 19 0 20,155 312 Beverage and Tobacco Products

319

Optimal adaptive control with ?LQG.  

E-Print Network (OSTI)

??This thesis introduces ?LQG, the hyper extension of the Linear Quadratic Gaussian Regulator, for solving general purpose (locally optimal) nonlinear adaptive control on multiple-input multiple-output… (more)

Wendt, Luke

2013-01-01T23:59:59.000Z

320

COMMENTARY:Limits to adaptation  

SciTech Connect

An actor-centered, risk-based approach to defining limits to social adaptation provides a useful analytic framing for identifying and anticipating these limits and informing debates over society s responses to climate change.

Preston, Benjamin L [ORNL

2013-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "adapting onsite electrical" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Indoor unit for electric heat pump  

DOE Patents (OSTI)

An indoor unit for an electric heat pump is provided in modular form including a refrigeration module, an air mover module, and a resistance heat package module, the refrigeration module including all of the indoor refrigerant circuit components including the compressor in a space adjacent the heat exchanger, the modules being adapted to be connected to air flow communication in several different ways as shown to accommodate placement of the unit in various orientations. 9 figs.

Draper, R.; Lackey, R.S.; Fagan, T.J. Jr.; Veyo, S.E.; Humphrey, J.R.

1984-05-22T23:59:59.000Z

322

Adaptive control for energy conservation  

DOE Green Energy (OSTI)

The use of adaptive control techniques is investigated in heating, ventilating, and air cnditioning (HVAC) systems in solar heated and cooled buildings to minimize the consumption of auxiliary energy. Optimal control theory is used in conjunction with the adaptive control techniques to accomplish the minimization of auxiliary energy. The resulting technique is referred to as adaptive optimal control (AOC). This study has been made by computer simulation and is centered on the National Security and Resources Study Center (NSRSC), a large solar heated and cooled building at the Los Alamos Scientific Laboratory (LASL). Simplified models of the building and HVAC system have been developed for both the heating and cooling modes. The control strategies actually used in the NSRSC were simulated in the models and an adaptive optimal controller was developed and also simulated. Simulation runs were made with both the conventional controller and the adaptive controller and performance results of the two simulations were compared. In the first results (obtained using a partial derivative system identification method), the adaptive optimal controller model demonstrated a savings in auxiliary energy of 28.8% for the heating simulation and 18.3% for the cooling simulation when compared to the conventional controller simulation models.

Farris, D.R.

1978-01-01T23:59:59.000Z

323

WeADAPT | Open Energy Information  

Open Energy Info (EERE)

WeADAPT WeADAPT Jump to: navigation, search Name WeADAPT Agency/Company /Organization weADAPT Sector Energy, Land, Water, Climate Resource Type Training materials, Lessons learned/best practices Website http://www.weadapt.org/ References weADAPT[1] "weADAPT.org is an online 'open space' on climate adaptation issues (including the synergies between adaptation and mitigation) which allows practitioners, researchers and policy makers to access credible, high quality information and to share experiences and lessons learnt with the weADAPT community. It is designed to facilitate learning, exchange, collaboration and knowledge integration to build a professional community of practice on adaptation issues while developing policy-relevant tools and guidance for adaptation planning and decision-making.

324

AfricaAdapt | Open Energy Information  

Open Energy Info (EERE)

AfricaAdapt AfricaAdapt Jump to: navigation, search Logo: Africa Adapt Name Africa Adapt Agency/Company /Organization AfricaAdapt Resource Type Training materials, Lessons learned/best practices Website http://www.africa-adapt.net/AA UN Region Eastern Africa, Middle Africa, Northern Africa, Southern Africa, Western Africa References AfricaAdapt[1] Abstract AfricaAdapt is an independent bilingual network (French/English) focused exclusively on Africa. The Network's aim is to facilitate the flow of climate change adaptation knowledge for sustainable livelihoods between researchers, policy makers, civil society organisations and communities who are vulnerable to climate variability and change across the continent. Africa Adapt Screenshot "AfricaAdapt is an independent bilingual network (French/English) focused

325

Electrical Quantities Programs/Projects in Quantum Electrical ...  

Science Conference Proceedings (OSTI)

Electrical Quantities Programs/Projects in Quantum Electrical Metrology. Electric Power Metrology and the Smart Grid. Contact. ...

2011-10-03T23:59:59.000Z

326

Heat recovery subsystem and overall system integration of fuel cell on-site integrated energy systems. Final report  

DOE Green Energy (OSTI)

The overall objective of this project was to determine the best HVAC (heating, ventilating and air conditioning) subsystem to interface with the Engelhard fuel cell system for application in commercial buildings. To accomplish this objective, the effects of several system and site specific parameters on the economic feasibility of fuel cell/HVAC systems were investigated. The fuel cell system provides electricity for an electric water chiller and for domestic electric needs. Supplemental electricity is purchased from the utility if needed. An excess of electricity generated by the fuel cell system can be sold to the utility. The fuel cell system also provides thermal energy which can be used for absorption cooling, space heating and domestic hot water. Thermal storage can be incorporated into the system. Thermal energy is also provided by an auxiliary boiler if needed to supplement the fuel cell system output. Fuel cell/HVAC systems were analyzed with the TRACE computer program. TRACE is an energy and economic analysis program that has been developed by The Trane Company. Results are detailed. (WHK)

Mougin, L.J.

1983-07-15T23:59:59.000Z

327

Electrical Equipment Inspection Program Electrical Safety  

E-Print Network (OSTI)

for Electrical Safety" (DOE )-HDBK-1092-2004 Title 29, Code of Federal Regulations, "Labor" , Chapter 17

Wechsler, Risa H.

328

Estimating the Value of Electricity Storage Resources in Electricity...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Estimating the Value of Electricity Storage Resources in Electricity Markets - EAC 2011 Estimating the Value of Electricity Storage Resources in Electricity Markets - EAC 2011 The...

329

Electricity in the Body  

NLE Websites -- All DOE Office Websites (Extended Search)

Electricity in the Body Name: SEAN Location: NA Country: NA Date: NA Question: OUR BRAINS SEND ELECTRICAL IMPULSES RIGHT. IS IT BASICALLY SAME AS NORMAL ELECTRICITY? IS IT LIKE...

330

Matter & Energy Electricity  

E-Print Network (OSTI)

See Also: Matter & Energy Electricity Energy Technology Computers & Math Distributed Computing Computer Science Science & Society Energy Issues Environmental Policies Reference Electric power transmission Distributed generation Electric power Grid computing ScienceDaily (Oct. 12, 2010) -- A new study

Hines, Paul

331

Electric Power Annual  

Gasoline and Diesel Fuel Update (EIA)

3. Electric Power Industry - U.S. Electricity Imports from and Electricity Exports to Canada and Mexico, 2001-2011 (Megawatthours) Canada Mexico U.S. Total Year Imports from...

332

Retail Electricity Competition  

E-Print Network (OSTI)

the savings in their electricity bill. While these consumerssavings in their electricity bill. A potential argumentsurplus S(s) minus the electricity bill: E j [S(s) ? p j D

Joskow, Paul; Tirole, Jean

2004-01-01T23:59:59.000Z

333

Captured key electrical safety lockout system  

DOE Patents (OSTI)

A safety lockout apparatus for an electrical circuit includes an electrical switch, a key, a lock and a blocking mechanism. The electrical switch is movable between an ON position at which the electrical circuit is energized and an OFF position at which the electrical circuit is deactivated. The lock is adapted to receive the key and is rotatable among a plurality of positions by the key. The key is only insertable and removable when the lock is at a preselected position. The lock is maintained in the preselected position when the key is removed from the lock. The blocking mechanism physically maintains the switch in its OFF position when the key is removed from the lock. The blocking mechanism preferably includes a member driven by the lock between a first position at which the electrical switch is movable between its ON and OFF positions and a second position at which the member physically maintains the electrical switch in its OFF position. Advantageously, the driven member's second position corresponds to the preselected position at which the key can be removed from and inserted into the lock.

Darimont, Daniel E. (Aurora, IL)

1995-01-01T23:59:59.000Z

334

Electrical safety guidelines  

SciTech Connect

The Electrical Safety Guidelines prescribes the DOE safety standards for DOE field offices or facilities involved in the use of electrical energy. It has been prepared to provide a uniform set of electrical safety standards and guidance for DOE installations in order to affect a reduction or elimination of risks associated with the use of electrical energy. The objectives of these guidelines are to enhance electrical safety awareness and mitigate electrical hazards to employees, the public, and the environment.

Not Available

1993-09-01T23:59:59.000Z

335

DOE handbook electrical safety  

SciTech Connect

Electrical Safety Handbook presents the Department of Energy (DOE) safety standards for DOE field offices or facilities involved in the use of electrical energy. It has been prepared to provide a uniform set of electrical safety guidance and information for DOE installations to effect a reduction or elimination of risks associated with the use of electrical energy. The objectives of this handbook are to enhance electrical safety awareness and mitigate electrical hazards to employees, the public, and the environment.

NONE

1998-01-01T23:59:59.000Z

336

Adaptive Liquid Crystal Windows  

SciTech Connect

Energy consumption by private and commercial sectors in the U.S. has steadily grown over the last decade. The uncertainty in future availability of imported oil, on which the energy consumption relies strongly, resulted in a dramatic increase in the cost of energy. About 20% of this consumption are used to heat and cool houses and commercial buildings. To reduce dependence on the foreign oil and cut down emission of greenhouse gases, it is necessary to eliminate losses and reduce total energy consumption by buildings. To achieve this goal it is necessary to redefine the role of the conventional windows. At a minimum, windows should stop being a source for energy loss. Ideally, windows should become a source of energy, providing net gain to reduce energy used to heat and cool homes. It is possible to have a net energy gain from a window if its light transmission can be dynamically altered, ideally electronically without the need of operator assistance, providing optimal control of the solar gain that varies with season and climate in the U.S. In addition, the window must not require power from the building for operation. Resolution of this problem is a societal challenge and of national interest and will have a broad global impact. For this purpose, the year-round, allclimate window solution to provide an electronically variable solar heat gain coefficient (SHGC) with a wide dynamic range is needed. AlphaMicron, Inc. (AMI) developed and manufactured 1ft × 1ft prototype panels for the world’s first auto-adjusting Adaptive Liquid Crystal Windows (ALCWs) that can operate from sunlight without the need for external power source and demonstrate an electronically adjustable SHGC. This novel windows are based on AlphaMicron’s patented e-Tint® technology, a guesthost liquid crystal system implemented on flexible, optically clear plastic films. This technology is suitable both for OEM and aftermarket (retro-fitting) lamination to new and existing windows. Low level of power consumption by ALCWs allows for on-board power electronics for automatic matching of transmission through windows to varying climate conditions without drawing the power from the power grid. ALCWs are capable of transmitting more sunlight in winters to assist in heating and less sunlight in summers to minimize overheating. As such, they can change the window from being a source of energy loss to a source of energy gain. In addition, the scalable AMI’s roll-to-roll process, proved by making 1ft × 1ftALCW prototype panels, allows for cost-effective production of large-scale window panels along with capability to change easily their color and shape. In addition to architectural glazing in houses and commercial buildings, ALCWs can be used in other applications where control of sunlight is needed, such as green houses, used by commercial produce growers and botanical gardens, cars, aircrafts, etc.

Taheri, Bahman; Bodnar, Volodymyr

2011-12-31T23:59:59.000Z

337

Sustainable Electricity | Clean Energy | ORNL  

NLE Websites -- All DOE Office Websites (Extended Search)

Sustainable Electricity SHARE Sustainable Electricity Outdoor power line accelerated testing. Oak Ridge National Laboratory's Energy Efficiency and Electricity Technologies Program...

338

2012 National Electricity Forum  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

1 U.S. Department of Energy U.S. Department of Energy National Electric Transmission Congestion Study Workshop - December 8, 2011 National Electric Transmission Congestion Study...

339

Electric:SpaceCharge  

Science Conference Proceedings (OSTI)

... OOF2: The Manual. Electric:SpaceCharge. Prev, 6.4.1. Material Properties, Next. Name. Electric:SpaceCharge — Spatial charge density. Details. ...

2013-07-05T23:59:59.000Z

340

Electricity Advisory Committee  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

3:30 - 3:40 pm Welcome and Opening Comments Kevin Kolevar, Assistant Secretary for Electricity Delivery and Energy Reliability Linda Stuntz, Chair, Electricity Advisory Committee...

Note: This page contains sample records for the topic "adapting onsite electrical" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Electric Power Annual  

Gasoline and Diesel Fuel Update (EIA)

Table 3.19. Net Generation from Geothermal by State, by Sector, 2011 and 2010 (Thousand Megawatthours) Electric Power Sector Census Division and State All Sectors Electric...

342

Electricity Monthly Update  

Gasoline and Diesel Fuel Update (EIA)

prepared by the Electric Power Operations Team, Office of Electricity, Renewables and Uranium Statistics, U.S. Energy Information Administration (EIA), U.S. Department of Energy....

343

Electric Power Annual  

Annual Energy Outlook 2012 (EIA)

7. Net Generation from Wind by State, by Sector, 2011 and 2010 (Thousand Megawatthours) Electric Power Sector Census Division and State All Sectors Electric Utilities Independent...

344

Electric Power Annual  

U.S. Energy Information Administration (EIA) Indexed Site

C. Natural Gas: Consumption for Electricity Generation and Useful Thermal Output, by Sector, 2001 - 2011 (Million Cubic Feet) Electric Power Sector Period Total (all sectors)...

345

Neighborhood Electric Vehicles  

NLE Websites -- All DOE Office Websites (Extended Search)

Neighborhood Electric Vehicles A neighborhood electric vehicle (NEV) is 4-wheeled vehicle, larger than a golf cart but smaller than most light-duty passenger vehicles. NEVs are...

346

Energy Basics: Electric Vehicles  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

& Fuels Printable Version Share this resource Fuels Vehicles Electric Vehicles Flexible Fuel Vehicles Fuel Cell Vehicles Hybrid Electric Vehicles Natural Gas Vehicles Propane...

348

Electricity Monthly Update  

Annual Energy Outlook 2012 (EIA)

CorrectionUpdate November 28, 2012 Map of Electric System Selected for Daily Peak Demand was replaced with the correct map showing Selected Wholesale Electricity and Natural Gas...

349

California's electricity crisis  

E-Print Network (OSTI)

The collapse of California's electricity restructuring and competition program has attracted attention around the world. Prices in California's competitive wholesale electricity market increased by 500% between the second ...

Joskow, Paul L.

2001-01-01T23:59:59.000Z

350

EIA Energy Kids - Electricity  

U.S. Energy Information Administration (EIA)

The energy sources we use to make electricity can be renewable or non-renewable, but electricity itself is neither renewable nor non-renewable.

351

Electrical Safety Committee Charter  

NLE Websites -- All DOE Office Websites (Extended Search)

safety and electrical safety awareness within the APS. The committee shall implement policies and practices adopted by the ANL Electrical Safety Committee and shall assist the ANL...

352

Electricity market module: Electricity fuel dispatch submodule  

Science Conference Proceedings (OSTI)

In previous Annual Energy Outlooks (AEO), international electricity trade was represented in the National Energy Modeling System (NEMS) Electricity Market Module (EMM) modeling framework as an exogenous input. The exception to this exogenous treatment was for firm power projections, i.e., new Canadian hydroelectric model builds. The AEO95 implementation of EMM allowed Canadian hydroelectric projects to be selected in the Electricity Capacity Planning (ECP) submodule on an annual basis and otherwise addressed as any other purchased power commitments. This technical memorandum addresses modifications to the Electricity Fuel Dispatch Submodule implemented in AEO96 to enhance the treatment of international electricity trade through the representation of economy imports from Canada.

NONE

1996-06-01T23:59:59.000Z

353

Adaptive vibration control using synchronous demodulation with ...  

Adaptive vibration control using synchronous demodulation with machine tool controller motor commutation United States Patent

354

Checking Properties of Adaptive Workflow Nets  

Science Conference Proceedings (OSTI)

In this paper we consider adaptive workflow nets, a class of nested nets that allows more comfort and expressive power for modeling adaptability and exception handling in workflow nets. We define two important behavioural properties of adaptive workflow ... Keywords: adaptive workflow, circumspectness, soundness, verification

Kees van Hee; Olivia Oanea; Alexander Serebrenik; Natalia Sidorova; Marc Voorhoeve; Irina A. Lomazova

2008-02-01T23:59:59.000Z

355

Electricity Restructuring: Deregulation or Reregulation?  

E-Print Network (OSTI)

Power in the British Electricity Spot Market. ” American805. Catherine Wolfram. “Electricity Markets: Should thePower in Wholesale Electricity Markets. ” The Electricity

Borenstein, Severin; Bushnell, James

2000-01-01T23:59:59.000Z

356

Energy Basics: Electric Resistance Heating  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

or by heaters in each room. Electric resistance heating converts nearly all of the energy in the electricity to heat. Types of Electric Resistance Heaters Electric resistance...

357

Adaptive hybrid impedance control of robot manipulators: a comparative study  

Science Conference Proceedings (OSTI)

Keywords: direct adaptive control, hybrid impedance control, passivity-based adaptive control, robotics

Luís F. Baptista; José M. G. Sá da Costa

1997-01-01T23:59:59.000Z

358

Electrical Safety - Monthly Analyses of Electrical Safety Occurrences  

NLE Websites -- All DOE Office Websites (Extended Search)

Office of Analysis Office of Analysis Operating Experience Committee Safety Alerts Safety Bulletins Annual Reports Special Operations Reports Safety Advisories Special Reports Causal Analysis Reviews Contact Us HSS Logo Electrical Safety Monthly Analyses of Electrical Safety Occurrences 2013 September 2013 Electrical Safety Occurrences August 2013 Electrical Safety Occurrences July 2013 Electrical Safety Occurrences June 2013 Electrical Safety Occurrences May 2013 Electrical Safety Occurrences April 2013 Electrical Safety Occurrences March Electrical Safety Occurrence February Electrical Safety Occurrence January Electrical Safety Occurrence 2012 December Electrical Safety Occurrence November Electrical Safety Occurrence October Electrical Safety Occurrence September Electrical Safety Occurrence

359

Overview of electrochemical power sources for electric and hybrid-electric vehicles.  

DOE Green Energy (OSTI)

Electric and hybrid-electric vehicles are being developed and commercialized around the world at a rate never before seen. These efforts are driven by the prospect of vehicles with lower emissions and higher fuel efficiencies. The widespread adaptation of such vehicles promises a cleaner environment and a reduction in the rate of accumulation of greenhouse gases, Critical to the success of this technology is the use of electrochemical power sources such as batteries and fuel cells, which can convert chemical energy to electrical energy more efficiently and quietly than internal combustion engines. This overview will concentrate on the work being conducted in the US to develop advanced propulsion systems for the electric and hybrid vehicles, This work is spearheaded by the US Advanced Battery Consortium (USABC) for electric vehicles and the Partnership for a New Generation of Vehicle (PNGV) for hybrid-electric vehicles, both of which can be read about on the world wide web (www.uscar.tom). As is commonly known, electric vehicles rely strictly on batteries as their source of power. Hybrid-electric vehicles, however, have a dual source of power. An internal combustion engine or eventually a fuel cell supplies the vehicle with power at a relatively constant rate. A battery pack (much smaller than a typical electric-vehicle battery pack) provides the vehicle with its fast transient power requirements such as during acceleration. This hybrid arrangement maximizes vehicle fuel efficiency. Electric and hybrid-electric vehicles will also be able to convert the vehicle's change in momentum during braking into electrical energy and store it in its battery pack (instead of lose the energy as heat). This process, known as regenerative braking, will add to the vehicle's fuel efficiency in an urban environment.

Dees, D. W.

1999-02-12T23:59:59.000Z

360

Fuel Cell Power Model Version 2: Startup Guide, System Designs, and Case Studies. Modeling Electricity, Heat, and Hydrogen Generation from Fuel Cell-Based Distributed Energy Systems  

DOE Green Energy (OSTI)

This guide helps users get started with the U.S. Department of Energy/National Renewable Energy Laboratory Fuel Cell Power (FCPower) Model Version 2, which is a Microsoft Excel workbook that analyzes the technical and economic aspects of high-temperature fuel cell-based distributed energy systems with the aim of providing consistent, transparent, comparable results. This type of energy system would provide onsite-generated heat and electricity to large end users such as hospitals and office complexes. The hydrogen produced could be used for fueling vehicles or stored for later conversion to electricity.

Steward, D.; Penev, M.; Saur, G.; Becker, W.; Zuboy, J.

2013-06-01T23:59:59.000Z

Note: This page contains sample records for the topic "adapting onsite electrical" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Housing assembly for electric vehicle transaxle  

DOE Patents (OSTI)

Disclosed is a drive assembly (10) for an electrically powered vehicle (12). The assembly includes a transaxle (16) having a two-speed transmission (40) and a drive axle differential (46) disposed in a unitary housing assembly (38), an oil-cooled prime mover or electric motor (14) for driving the transmission input shaft (42), an adapter assembly (24) for supporting the prime mover on the transaxle housing assembly, and a hydraulic system (172) providing pressurized oil flow for cooling and lubricating the electric motor and transaxle and for operating a clutch (84) and a brake (86) in the transmission to shift between the two-speed ratios of the transmission. The adapter assembly allows the prime mover to be supported in several positions on the transaxle housing. The brake is spring-applied and locks the transmission in its low-speed ratio should the hydraulic system fail. The hydraulic system pump is driven by an electric motor (212) independent of the prime mover and transaxle.

Kalns, Ilmars (Northville, MI)

1981-01-01T23:59:59.000Z

362

The implications of carbon taxation on microgrid adoption of small-scale on-site power generation using a multi-criteria approach  

E-Print Network (OSTI)

is a reduction in its electricity bill. • The µGrid is notthe total bill for meeting the µGrid's electricity load? It

Siddiqui, Afzal S.; de Almeida, Anibal T.; Marnay, Chris; Rubio, F. Javier

2002-01-01T23:59:59.000Z

363

Electric car Gasoline car  

E-Print Network (OSTI)

ENAC/ Electric car (Renault) Gasoline car (competitors) Gasoline car (Renault) Market shares of an electric vehicle? Electric car (Renault) Gasoline car (competitors) Gasoline car (Renault) Market shares preferences. · Identification of population segments with a strong interest for electric cars. · Forecasting

364

Multi-agent electricity market modeling with EMCAS.  

Science Conference Proceedings (OSTI)

Electricity systems are a central component of modern economies. Many electricity markets are transitioning from centrally regulated systems to decentralized markets. Furthermore, several electricity markets that have recently undergone this transition have exhibited extremely unsatisfactory results, most notably in California. These high stakes transformations require the introduction of largely untested regulatory structures. Suitable tools that can be used to test these regulatory structures before they are applied to real systems are required. Multi-agent models can provide such tools. To better understand the requirements such as tool, a live electricity market simulation was created. This experience helped to shape the development of the multi-agent Electricity Market Complex Adaptive Systems (EMCAS) model. To explore EMCAS' potential, several variations of the live simulation were created. These variations probed the possible effects of changing power plant outages and price setting rules on electricity market prices.

North, M.; Macal, C.; Conzelmann, G.; Koritarov, V.; Thimmapuram, P.; Veselka, T.

2002-09-05T23:59:59.000Z

365

Adaptive fuzzy control for inter-vehicle gap keeping  

E-Print Network (OSTI)

Abstract—There is a broad range of diverse technologies under the generic topic of intelligent transportation systems (ITS) that holds the answer to many of the transportation problems. In this paper, one approach to ITS is presented. One of the most important research topics in this field is adaptive cruise control (ACC). The main features of this kind of controller are the adaptation of the speed of the car to a predefined one and the keeping of a safe gap between the controlled car and the preceding vehicle on the road. We present an ACC controller based on fuzzy logic, which assists the speed and distance vehicle control, offering driving strategies and actuation over the throttle of a car. The driving information is supplied by the car tachometer and a RTK differential GPS, and the actuation over the car is made through an electronic interface that simulates the electrical signal of the accelerator pedal directly to the onboard computer. This control is embedded in an automatic driving system installed in two testbed mass-produced cars instrumented for testing the work of these controllers in a real environment. The results obtained in these experiments show a very good performance of the gap controller, which is adaptable to all the speeds and safe gap selections. Index Terms—Autonomous vehicles, longitudinal control, intelligent vehicles, field experiments, fuzzy logic, adaptive cruise control (ACC), safe gap, Stop&Go, platoon driving, wireless communications, intelligent transportation systems (ITS). I.

José E. Naranjo; Carlos González; Jesús Reviejo; Ricardo García; Teresa De Pedro

2003-01-01T23:59:59.000Z

366

Electricity Market Module  

Gasoline and Diesel Fuel Update (EIA)

This page intentionally left blank This page intentionally left blank 95 U.S. Energy Information Administration | Assumptions to the Annual Energy Outlook 2011 Electricity Market Module The NEMS Electricity Market Module (EMM) represents the capacity planning, dispatching, and pricing of electricity. It is composed of four submodules-electricity capacity planning, electricity fuel dispatching, electricity load and demand, and electricity finance and pricing. It includes nonutility capacity and generation, and electricity transmission and trade. A detailed description of the EMM is provided in the EIA publication, Electricity Market Module of the National Energy Modeling System 2011, DOE/EIA-M068(2011). Based on fuel prices and electricity demands provided by the other modules of the NEMS, the EMM determines the most

367

Electricity Market Module  

Gasoline and Diesel Fuel Update (EIA)

This page inTenTionally lefT blank 91 U.S. Energy Information Administration | Assumptions to the Annual Energy Outlook 2012 Electricity Market Module The NEMS Electricity Market Module (EMM) represents the capacity planning, dispatching, and pricing of electricity. It is composed of four submodules-electricity capacity planning, electricity fuel dispatching, electricity load and demand, and electricity finance and pricing. It includes nonutility capacity and generation, and electricity transmission and trade. A detailed description of the EMM is provided in the EIA publication, Electricity Market Module of the National Energy Modeling System 2012, DOE/EIA-M068(2012). Based on fuel prices and electricity demands provided by the other modules of the NEMS, the EMM determines the most

368

Electricity Market Module  

U.S. Energy Information Administration (EIA) Indexed Site

Market Module Market Module This page inTenTionally lefT blank 101 U.S. Energy Information Administration | Assumptions to the Annual Energy Outlook 2013 Electricity Market Module The NEMS Electricity Market Module (EMM) represents the capacity planning, dispatching, and pricing of electricity. It is composed of four submodules-electricity capacity planning, electricity fuel dispatching, electricity load and demand, and electricity finance and pricing. It includes nonutility capacity and generation, and electricity transmission and trade. A detailed description of the EMM is provided in the EIA publication, Electricity Market Module of the National Energy Modeling System 2013, DOE/EIA-M068(2013). Based on fuel prices and electricity demands provided by the other modules of the NEMS, the EMM determines the most

369

Introduction Computational Efficiency Electricity Portfolio Planning Electricity Portfolios  

E-Print Network (OSTI)

Introduction Computational Efficiency Electricity Portfolio Planning Electricity Portfolios 2009/11/30­12/01 István Maros Electricity Portfolio #12;Introduction Computational Efficiency Electricity Portfolio Outline 1 Introduction 2 Computational Efficiency 3 Electricity Portfolio Approximate

370

Tampa Electric Neural Network Sootblowing  

Science Conference Proceedings (OSTI)

Boiler combustion dynamics change continuously due to several factors including coal quality, boiler loading, ambient conditions, changes in slag/soot deposits and the condition of plant equipment. NOx formation, Particulate Matter (PM) emissions, and boiler thermal performance are directly affected by the sootblowing practices on a unit. As part of its Power Plant Improvement Initiative program, the US DOE is providing cofunding (DE-FC26-02NT41425) and NETL is the managing agency for this project at Tampa Electric's Big Bend Station. This program serves to co-fund projects that have the potential to increase thermal efficiency and reduce emissions from coal-fired utility boilers. A review of the Big Bend units helped identify intelligent sootblowing as a suitable application to achieve the desired objectives. The existing sootblower control philosophy uses sequential schemes, whose frequency is either dictated by the control room operator or is timed based. The intent of this project is to implement a neural network based intelligent sootblowing system, in conjunction with state-of-the-art controls and instrumentation, to optimize the operation of a utility boiler and systematically control boiler fouling. Utilizing unique, on-line, adaptive technology, operation of the sootblowers can be dynamically controlled based on real-time events and conditions within the boiler. This could be an extremely cost-effective technology, which has the ability to be readily and easily adapted to virtually any pulverized coal fired boiler. Through unique on-line adaptive technology, Neural Network-based systems optimize the boiler operation by accommodating equipment performance changes due to wear and maintenance activities, adjusting to fluctuations in fuel quality, and improving operating flexibility. The system dynamically adjusts combustion setpoints and bias settings in closed-loop supervisory control to simultaneously reduce NO{sub x} emissions and improve heat rate around the clock.

Mark A. Rhode

2004-09-30T23:59:59.000Z

371

Tampa Electric Neural Network Sootblowing  

Science Conference Proceedings (OSTI)

Boiler combustion dynamics change continuously due to several factors including coal quality, boiler loading, ambient conditions, changes in slag/soot deposits and the condition of plant equipment. NO{sub x} formation, Particulate Matter (PM) emissions, and boiler thermal performance are directly affected by the sootblowing practices on a unit. As part of its Power Plant Improvement Initiative program, the US DOE is providing cofunding (DE-FC26-02NT41425) and NETL is the managing agency for this project at Tampa Electric's Big Bend Station. This program serves to co-fund projects that have the potential to increase thermal efficiency and reduce emissions from coal-fired utility boilers. A review of the Big Bend units helped identify intelligent sootblowing as a suitable application to achieve the desired objectives. The existing sootblower control philosophy uses sequential schemes, whose frequency is either dictated by the control room operator or is timed based. The intent of this project is to implement a neural network based intelligent soot-blowing system, in conjunction with state-of-the-art controls and instrumentation, to optimize the operation of a utility boiler and systematically control boiler fouling. Utilizing unique, on-line, adaptive technology, operation of the sootblowers can be dynamically controlled based on real-time events and conditions within the boiler. This could be an extremely cost-effective technology, which has the ability to be readily and easily adapted to virtually any pulverized coal fired boiler. Through unique on-line adaptive technology, Neural Network-based systems optimize the boiler operation by accommodating equipment performance changes due to wear and maintenance activities, adjusting to fluctuations in fuel quality, and improving operating flexibility. The system dynamically adjusts combustion setpoints and bias settings in closed-loop supervisory control to simultaneously reduce NO{sub x} emissions and improve heat rate around the clock.

Mark A. Rhode

2003-12-31T23:59:59.000Z

372

Tampa Electric Neural Network Sootblowing  

Science Conference Proceedings (OSTI)

Boiler combustion dynamics change continuously due to several factors including coal quality, boiler loading, ambient conditions, changes in slag/soot deposits and the condition of plant equipment. NOx formation, Particulate Matter (PM) emissions, and boiler thermal performance are directly affected by the sootblowing practices on a unit. As part of its Power Plant Improvement Initiative program, the US DOE is providing co-funding (DE-FC26-02NT41425) and NETL is the managing agency for this project at Tampa Electric's Big Bend Station. This program serves to co-fund projects that have the potential to increase thermal efficiency and reduce emissions from coal-fired utility boilers. A review of the Big Bend units helped identify intelligent sootblowing as a suitable application to achieve the desired objectives. The existing sootblower control philosophy uses sequential schemes, whose frequency is either dictated by the control room operator or is timed based. The intent of this project is to implement a neural network based intelligent sootblowing system, in conjunction with state-of-the-art controls and instrumentation, to optimize the operation of a utility boiler and systematically control boiler fouling. Utilizing unique, on-line, adaptive technology, operation of the sootblowers can be dynamically controlled based on real-time events and conditions within the boiler. This could be an extremely cost-effective technology, which has the ability to be readily and easily adapted to virtually any pulverized coal fired boiler. Through unique on-line adaptive technology, Neural Network-based systems optimize the boiler operation by accommodating equipment performance changes due to wear and maintenance activities, adjusting to fluctuations in fuel quality, and improving operating flexibility. The system dynamically adjusts combustion setpoints and bias settings in closed-loop supervisory control to simultaneously reduce NO{sub x} emissions and improve heat rate around the clock.

Mark A. Rhode

2004-03-31T23:59:59.000Z

373

Adaptation Space: Surviving Non-Maskable Failures  

E-Print Network (OSTI)

Some failures cannot be masked by redundancies, because an unanticipated situation occurred, because fault-tolerance measures were not adequate, or because there was a security breach (which is not amenable to replication). Applications that wish to continue to offer some service despite nonmaskable failure must adapt to the loss of resources. When numerous combinations of non-maskable failure modes are considered, the set of possible adaptations becomes complex. This paper presents adaptation spaces, a formalism for navigating among combinations of adaptations. An adaptation space describes a collection of possible adaptations of a software component or system, and provides a uniform way of viewing a group of alternative software adaptations. Adaptation spaces describe the different means for monitoring the conditions that different adaptations depend on, and the particular configurations through which an adaptive application navigate. Our goal is to use adaptation spaces to provide survivable services to applications despite non-maskable failures such as malicious attacks. We present the basic concepts concerning adaptation spaces, with examples. We then present a formal model for reasoning about and selecting alternative adaptations, allowing developers of survivable application to automate their system’s adaptive behavior. 1

Crispin Cowan; Lois Delcambre; Anne-francoise Le Meur; Ling Liu; David Maier; Dylan Mcnamee; Michael Miller; Calton Pu; Perry Wagle; Jonathan Walpole

1998-01-01T23:59:59.000Z

374

Central Hudson Gas & Electric (Electric) - Residential Energy...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

electric customers who upgrade heating, cooling or ventilation systems with specific types of energy efficient equipment. These rebates include efficient central air...

375

Adaptive wiener image restoration kernel  

DOE Patents (OSTI)

A method and device for restoration of electro-optical image data using an adaptive Wiener filter begins with constructing imaging system Optical Transfer Function, and the Fourier Transformations of the noise and the image. A spatial representation of the imaged object is restored by spatial convolution of the image using a Wiener restoration kernel.

Yuan, Ding (Henderson, NV)

2007-06-05T23:59:59.000Z

376

ON CONSISTENT FUSION OF MULTIMODAL BIOMETRICS Dept. of Electrical Engineering  

E-Print Network (OSTI)

ON CONSISTENT FUSION OF MULTIMODAL BIOMETRICS S. Y. Kung Dept. of Electrical Engineering Princeton feasible. Therefore, multi-modality adaptive fusion, combining audio and visual information, offers architecture. In addition, a consistent fusion strategy is in- troduced as a baseline fusion scheme, which

Mak, Man-Wai

377

Mohave Electric Cooperative - Renewable Energy Incentive Program...  

Open Energy Info (EERE)

PV and Wind systems: 0.35W Solar Water Heating: 0.75kWh of estimated first year energy savings Eligible System Size up to 50 kW or 125% onsite load, whichever is less...

378

Segmentation of historical machine-printed documents using Adaptive Run Length Smoothing and skeleton segmentation paths  

E-Print Network (OSTI)

of the valuable historical collections. In order to achieve accu- rate recognition results, a robust and efficientSegmentation of historical machine-printed documents using Adaptive Run Length Smoothing Stamatopoulos b , Nikos Papamarkos a a Department of Electrical and Computer Engineering, Democritus University

Gatos, Basilios

379

Adaptive energy-efficient scheduling for real-time tasks on DVS-enabled heterogeneous clusters  

Science Conference Proceedings (OSTI)

Developing energy-efficient clusters not only can reduce power electricity cost but also can improve system reliability. Existing scheduling strategies developed for energy-efficient clusters conserve energy at the cost of performance. The performance ... Keywords: Adaptivity, Cluster, Dynamic voltage scaling, Energy-efficient, Real-time, Scheduling

Xiaomin Zhu; Chuan He; Kenli Li; Xiao Qin

2012-06-01T23:59:59.000Z

380

Resource provisioning with budget constraints for adaptive applications in cloud environments  

Science Conference Proceedings (OSTI)

Utility computing was a vision stated more than 40 years ago. It refers to the idea that computing resources and services can be delivered, utilized, and paid for as utilities such as water or electricity. The recent emergence of cloud computing ... Keywords: adaptive applications, cloud computing, resource provisioning

Qian Zhu; Gagan Agrawal

2010-06-01T23:59:59.000Z

Note: This page contains sample records for the topic "adapting onsite electrical" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Technical evaluation of the adequacy of station electric-distribution-system voltages for the Pilgrim Nuclear Power Station, Unit 1  

Science Conference Proceedings (OSTI)

This report documents the technical evaluation of the adequacy of the station electric distribution system voltages for the Pilgrim Nuclear Power Station, Unit 1. The evaluation is to determine if the onsite distribution system in conjunction with the offsite power sources has sufficient capacity to automatically start and operate all Class 1E loads within the equipment voltage ratings under certain conditions established by the Nuclear Regulatory Commission. The analyses demonstrated that for the worst case conditions established, the Class 1E equipment will automatically start and continue to operate within the equiment design voltage rating.

Selan, J.C.

1981-12-28T23:59:59.000Z

382

Electric arc saw apparatus  

DOE Patents (OSTI)

A portable, hand held electric arc saw has a small frame for supporting an electrically conducting rotary blade which serves as an electrode for generating an electric arc to erode a workpiece. Electric current is supplied to the blade by biased brushes and a slip ring which are mounted in the frame. A pair of freely movable endless belts in the form of crawler treads stretched between two pulleys are used to facilitate movement of the electric arc saw. The pulleys are formed of dielectric material to electrically insulate the crawler treads from the frame.

Deichelbohrer, Paul R. (Richland, WA)

1986-01-01T23:59:59.000Z

383

Hardware implementation of wireless bit rate adaptation  

E-Print Network (OSTI)

This thesis presents a hardware implementation of the SoftRate bit-rate adaptation protocol. SoftRate is a new bit-rate adaptation protocol, which uses per-bit confidence hints generated by the convolutional decoder to ...

Gross, Samuel A

2010-01-01T23:59:59.000Z

384

An extensible monitoring and adaptation framework  

Science Conference Proceedings (OSTI)

Several techniques have been defined for the monitoring and adaptation of applications. However, such techniques usually work in isolation and cannot be easily integrated to tackle complex monitoring and adaptation scenarios. Furthermore, applications ...

Razvan Popescu; Athanasios Staikopoulos; Siobhán Clarke

2009-11-01T23:59:59.000Z

385

Adaptive control of Unmanned Aerial Systems  

E-Print Network (OSTI)

Adaptive control is considered to be one of the key enabling technologies for future high-performance, safety-critical systems such as air-breathing hypersonic vehicles. Adaptive flight control systems offer improved ...

Dydek, Zachary Thompson

2010-01-01T23:59:59.000Z

386

Modeling Power Systems as Complex Adaptive Systems  

Science Conference Proceedings (OSTI)

Physical analogs have shown considerable promise for understanding the behavior of complex adaptive systems, including macroeconomics, biological systems, social networks, and electric power markets. Many of today's most challenging technical and policy questions can be reduced to a distributed economic control problem. Indeed, economically based control of large-scale systems is founded on the conjecture that the price-based regulation (e.g., auctions, markets) results in an optimal allocation of resources and emergent optimal system control. This report explores the state-of-the-art physical analogs for understanding the behavior of some econophysical systems and deriving stable and robust control strategies for using them. We review and discuss applications of some analytic methods based on a thermodynamic metaphor, according to which the interplay between system entropy and conservation laws gives rise to intuitive and governing global properties of complex systems that cannot be otherwise understood. We apply these methods to the question of how power markets can be expected to behave under a variety of conditions.

Chassin, David P.; Malard, Joel M.; Posse, Christian; Gangopadhyaya, Asim; Lu, Ning; Katipamula, Srinivas; Mallow, J V.

2004-12-30T23:59:59.000Z

387

RELIABILITY ANALYSIS OF THE ELECTRICAL POWER DISTRIBUTION SYSTEM TO SELECTED PORTIONS OF THE NUCLEAR HVAC SYSTEM  

Science Conference Proceedings (OSTI)

A design requirement probability of 0.01 or less in a 4-hour period ensures that the nuclear heating, ventilation, and air-conditioning (HVAC) system in the primary confinement areas of the Dry Transfer Facilities (DTFs) and Fuel Handling Facility (FHF) is working during a Category 1 drop event involving commercial spent nuclear fuel (CSNF) assemblies (BSC 2004a , Section 5.1.1.48). This corresponds to an hourly HVAC failure rate of 2.5E-3 per hour or less, which is contributed to by two dominant causes: equipment failure and loss of electrical power. Meeting this minimum threshold ensures that a Category 1 initiating event followed by the failure of HVAC is a Category 2 event sequence. The two causes for the loss of electrical power include the loss of offsite power and the loss of onsite power distribution. Thus, in order to meet the threshold requirement aforementioned, the failure rate of mechanical equipment, loss of offsite power, and loss of onsite power distribution must be less than or equal to 2.5E-3 per hour for the nuclear HVAC system in the primary confinement areas of the DTFs and FHF. The loss of offsite power occurs at a frequency of 1.1E-5 per hour (BSC 2004a, Section 5.1.1.48). The purpose of this analysis is to determine the probability of occurrence of the unavailability of the nuclear HVAC system in the primary confinement areas of the DTFs and FHF due to loss of electrical power. In addition, this analysis provides insights on the contribution to the unavailability of the HVAC system due to equipment failure. The scope of this analysis is limited to finding the frequency of loss of electrical power to the nuclear HVAC system in the primary confinement areas of the DTFs and FHF.

N. Ramirez

2004-12-16T23:59:59.000Z

388

E-laboratories : agent-based modeling of electricity markets.  

SciTech Connect

Electricity markets are complex adaptive systems that operate under a wide range of rules that span a variety of time scales. These rules are imposed both from above by society and below by physics. Many electricity markets are undergoing or are about to undergo a transition from centrally regulated systems to decentralized markets. Furthermore, several electricity markets have recently undergone this transition with extremely unsatisfactory results, most notably in California. These high stakes transitions require the introduction of largely untested regulatory structures. Suitable laboratories that can be used to test regulatory structures before they are applied to real systems are needed. Agent-based models can provide such electronic laboratories or ''e-laboratories.'' To better understand the requirements of an electricity market e-laboratory, a live electricity market simulation was created. This experience helped to shape the development of the Electricity Market Complex Adaptive Systems (EMCAS) model. To explore EMCAS' potential as an e-laboratory, several variations of the live simulation were created. These variations probed the possible effects of changing power plant outages and price setting rules on electricity market prices.

North, M.; Conzelmann, G.; Koritarov, V.; Macal, C.; Thimmapuram, P.; Veselka, T.

2002-05-03T23:59:59.000Z

389

E-laboratories : agent-based modeling of electricity markets.  

SciTech Connect

Electricity markets are complex adaptive systems that operate under a wide range of rules that span a variety of time scales. These rules are imposed both from above by society and below by physics. Many electricity markets are undergoing or are about to undergo a transition from centrally regulated systems to decentralized markets. Furthermore, several electricity markets have recently undergone this transition with extremely unsatisfactory results, most notably in California. These high stakes transitions require the introduction of largely untested regulatory structures. Suitable laboratories that can be used to test regulatory structures before they are applied to real systems are needed. Agent-based models can provide such electronic laboratories or ''e-laboratories.'' To better understand the requirements of an electricity market e-laboratory, a live electricity market simulation was created. This experience helped to shape the development of the Electricity Market Complex Adaptive Systems (EMCAS) model. To explore EMCAS' potential as an e-laboratory, several variations of the live simulation were created. These variations probed the possible effects of changing power plant outages and price setting rules on electricity market prices.

North, M.; Conzelmann, G.; Koritarov, V.; Macal, C.; Thimmapuram, P.; Veselka, T.

2002-05-03T23:59:59.000Z

390

Electric Power Annual  

Annual Energy Outlook 2012 (EIA)

5.70 SUN PV 2011 10 10393 PUD No 1 of Klickitat County Electric Utility Roosevelt Biogas 1 WA 7832 7 10.00 LFG CT 2011 10 10393 PUD No 1 of Klickitat County Electric Utility...

391

Annual Power Electric  

U.S. Energy Information Administration (EIA) Indexed Site

Electric Power Annual Revision Final Data for 2011 Released: January 30, 2013 Revison Date: May 16, 2013 May 16, 2013 Data revision. 2011 Total (all sectors) and electric utility...

392

Electricity Distribution System Workshop  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Discussion Summary Discussion Summary Electricity Transmission System Workshop 1 Grid Tech Team Discussion Summary Electricity Transmission System Workshop 2 Table of Contents INTRODUCTION ............................................................................................................................................. 3 EXECUTIVE SUMMARY .................................................................................................................................. 4 Process ...................................................................................................................................................... 4 Synthesized Challenges ............................................................................................................................. 5

393

Heart and Electric Potential  

NLE Websites -- All DOE Office Websites (Extended Search)

Heart and Electric Potential Name: Pete Location: NA Country: NA Date: NA Question: What is the electrical output that the SA Node andor AV Node put out when emitting an...

394

Madrid Electric Lighting Report  

NLE Websites -- All DOE Office Websites (Extended Search)

Electric Lighting Quality Page 1 of 2 ELECTRIC LIGHTING QUALITY MAGIC BOX is a versatile home. Its design allows to change the room size by opening and closing the movable walls...

395

Renewable Electricity Futures (Presentation)  

DOE Green Energy (OSTI)

This presentation summarizes findings of NREL's Renewable Electricity Futures study, published in June 2012. RE Futures investigated the challenges and impacts of achieving very high renewable electricity generation levels in the contiguous United States by 2050.

Hand, M. M.

2012-09-01T23:59:59.000Z

396

Fish in electrical storms  

NLE Websites -- All DOE Office Websites (Extended Search)

Fish in electrical storms Name: Kelly A Krugeger Age: NA Location: NA Country: NA Date: NA Question: I have always been told to stay out of water during an electrical storm...

397

Renewable Electricity Futures (Presentation)  

SciTech Connect

This presentation summarizes findings of NREL's Renewable Electricity Futures study, published in June 2012. RE Futures investigated the challenges and impacts of achieving very high renewable electricity generation levels in the contiguous United States by 2050.

Mai, T.

2013-04-01T23:59:59.000Z

398

Designing electricity transmission auctions  

E-Print Network (OSTI)

The UK has ambitious plans for exploiting offshore wind for electricity production in order to meet its challenging target under the EU Renewable Energy Directive. This could involve investing up to 20bn in transmission assets to bring electricity...

Greve, Thomas; Pollitt, Michael G.

2012-10-26T23:59:59.000Z

399

Renewable Electricity Futures (Presentation)  

SciTech Connect

This presentation library summarizes findings of NREL's Renewable Electricity Futures study, published in June 2012. RE Futures investigated the challenges and impacts of achieving very high renewable electricity generation levels in the contiguous United States by 2050.

Mai, T.

2012-10-01T23:59:59.000Z

400

EIA - State Electricity Profiles  

Gasoline and Diesel Fuel Update (EIA)

Capacity (megawatts) 27,638 13 Electric Utilities 23,008 8 Independent Power Producers & Combined Heat and Power 4,630 23 Net Generation (megawatthours) 125,180,739 11 Electric...

Note: This page contains sample records for the topic "adapting onsite electrical" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

EIA - State Electricity Profiles  

Annual Energy Outlook 2012 (EIA)

Capacity (megawatts) 44,127 5 Electric Utilities 4,800 35 Independent Power Producers & Combined Heat and Power 39,327 3 Net Generation (megawatthours) 201,351,872 5 Electric...

402

EIA - State Electricity Profiles  

Annual Energy Outlook 2012 (EIA)

Capacity (megawatts) 26,392 15 Electric Utilities 20,115 14 Independent Power Producers & Combined Heat and Power 6,277 16 Net Generation (megawatthours) 111,750,957 12 Electric...

403

EIA - State Electricity Profiles  

Annual Energy Outlook 2012 (EIA)

Capacity (megawatts) 36,636 7 Electric Utilities 26,639 3 Independent Power Producers & Combined Heat and Power 9,998 11 Net Generation (megawatthours) 137,576,941 8 Electric...

404

2014 Electricity Form Proposals  

U.S. Energy Information Administration (EIA) Indexed Site

Electricity and Renewable (Photovoltaic) Survey Form Changes Proposed for Electricity and Renewable (Photovoltaic) Survey Form Changes Proposed for 2014 The U.S. Energy Information Administration (EIA) is proposing changes to its electricity data collection in 2014. These changes involve the following surveys: Form EIA-63B, "Annual Photovoltaic Cell/Module Shipments Report," Form EIA-411, "Coordinated Bulk Power Supply Program Report," Form EIA-826, "Monthly Electric Utility Sales and Revenue Report with State Distributions," Form EIA-860, "Annual Electric Generator Report," Form EIA-860M, "Monthly Update to the Annual Electric Generator Report," Form EIA-861, "Annual Electric Power Industry Report," Form EIA-861S, "Annual Electric Power Industry Report (Short Form)," and

405

Renewable Electricity Futures (Presentation)  

Science Conference Proceedings (OSTI)

This presentation summarizes findings of NREL's Renewable Electricity Futures study, published in June 2012. RE Futures investigated the challenges and impacts of achieving very high renewable electricity generation levels in the contiguous United States by 2050.

Mai, T.

2012-11-01T23:59:59.000Z

406

International Electricity Regulation  

Energy.gov (U.S. Department of Energy (DOE))

U.S. trade in electric energy with Canada and Mexico is rising, bringing economic and reliability benefits to the United States and its trading partners. Within the Office of Electricity Delivery ...

407

Assessing Vehicle Electricity Demand Impacts on California Electricity Supply  

E-Print Network (OSTI)

CEC (2009) Statewide Electricity Rates by Utility, Class andrates if the marginal electricity rate from the LCFS isestimated marginal electricity emissions rate in California’

McCarthy, Ryan W.

2009-01-01T23:59:59.000Z

408

Assessing Vehicle Electricity Demand Impacts on California Electricity Supply  

E-Print Network (OSTI)

55. Sample distribution of vehicle electricity demand forand distribution facilities that supply electricity demand.55. Sample distribution of vehicle electricity demand for

McCarthy, Ryan W.

2009-01-01T23:59:59.000Z

409

Electricity Grid: Impacts of Plug-In Electric Vehicle Charging  

E-Print Network (OSTI)

discusses how electricity demands for vehicle charging cantiming of vehicle electricity demands. challenges associatedand timing of vehicle electricity demand. As the number of

Yang, Christopher; McCarthy, Ryan

2009-01-01T23:59:59.000Z

410

Assessing Vehicle Electricity Demand Impacts on California Electricity Supply  

E-Print Network (OSTI)

Statewide California Electricity Demand. [accessed June 22,fuel efficiency and electricity demand assumptions used into added vehicle electricity demand in the BAU (no IGCC)

McCarthy, Ryan W.

2009-01-01T23:59:59.000Z

411

Alternative Fuels Data Center: Hybrid Electric Vehicle (HEV) and Electric  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Hybrid Electric Hybrid Electric Vehicle (HEV) and Electric Vehicle (EV) Exemption from Vehicle Testing Requirements to someone by E-mail Share Alternative Fuels Data Center: Hybrid Electric Vehicle (HEV) and Electric Vehicle (EV) Exemption from Vehicle Testing Requirements on Facebook Tweet about Alternative Fuels Data Center: Hybrid Electric Vehicle (HEV) and Electric Vehicle (EV) Exemption from Vehicle Testing Requirements on Twitter Bookmark Alternative Fuels Data Center: Hybrid Electric Vehicle (HEV) and Electric Vehicle (EV) Exemption from Vehicle Testing Requirements on Google Bookmark Alternative Fuels Data Center: Hybrid Electric Vehicle (HEV) and Electric Vehicle (EV) Exemption from Vehicle Testing Requirements on Delicious Rank Alternative Fuels Data Center: Hybrid Electric Vehicle (HEV)

412

Boundedness of adaptive nets is decidable  

Science Conference Proceedings (OSTI)

Boundedness is a relevant property for adaptive systems: creation, composition and destruction of components at runtime introduce different infiniteness dimensions. In this paper we show the decidability of the boundedness for adaptive nets, a subclass ... Keywords: Adaptive nets, Boundedness, Decidability, Theory of computation

Olivia Oanea

2011-08-01T23:59:59.000Z

413

Adaptive Techniques for Homebased Software DSMs #  

E-Print Network (OSTI)

Adaptive Techniques for Home­based Software DSMs # Lauro Whately 1 , Raquel Pinto 1 , Muralidharan and evaluates Home­based Adaptive Protocol (HAP), a software distributed shared­memory system. HAP performs two with the adaptive system. Keywords---Software Distributed Shared Memory, Home­basedLazy Release Consistency, Home­based

Bianchini, Ricardo

414

A platform for developing adaptable multicore applications  

Science Conference Proceedings (OSTI)

Computer systems are resource constrained. Application adaptation is a useful way to optimize system resource usage while satisfying the application performance constraints. Previous application adaptation efforts, however, were ad-hoc, time-consuming, ... Keywords: application adaptation, frequency scaling, multicore, parallelization, run-time systems

Dan Fay; Li Shang; Dirk Grunwald

2009-10-01T23:59:59.000Z

415

Presented by Adaptive Hybrid Mesh Refinement for  

E-Print Network (OSTI)

meters. · Orography plays an important role in determining the strength and location of the atmospheric on orographic field data Hybrid adapted geodesic mesh based on orographic field data Structured adapted spherical mesh based on orographic field data #12;7 Khamayseh_ITAPS_SC07 h-Adaptive hybrid mesh generation

416

Enhancing adaptability of distributed groupware applications  

Science Conference Proceedings (OSTI)

Distributed Groupware applications must be designed to cope with an increasingly diverse set of operational conditions. The available network bandwidth and latency, the network connectivity, the number of users, the type of devices, the system load, ... Keywords: adaptability, adaptive, adaptive layer, context awareness, groupware, mobile devices

Tebalo Tsoaeli; Judith Bishop

2005-07-01T23:59:59.000Z

417

General Dynamics, Electric Boat  

Science Conference Proceedings (OSTI)

General Dynamics, Electric Boat. NVLAP Lab Code: 100560-0. Address and Contact Information: 75 Eastern Point Road ...

2013-08-16T23:59:59.000Z

418

Electric arc saw apparatus  

DOE Patents (OSTI)

A portable, hand-held electric arc saw apparatus comprising a small frame for supporting an electrically conducting rotary blade which serves as an electrode for generating an electric arc between the blade and a workpiece of opposite polarity. Electrically conducting means are provided on said frame for transmitting current to said blade. A pair of freely movable endless belts in the form of crawler treads are employed to facilitate movement of the apparatus relative to the workpiece.

Deichelbohrer, P.R.

1983-08-08T23:59:59.000Z

419

Electric Power Metrology News  

Science Conference Proceedings (OSTI)

... Next-generation "smart" electrical meters for residential and commercial ... NIST Team Demystifies Utility of Power Factor Correction Devices Release ...

2010-05-24T23:59:59.000Z

420

Arizona Electricity Restructuring Suspended  

U.S. Energy Information Administration (EIA)

This inactivity strongly suggests that electricity restructuring in Arizona has ... demand side management, environmental, ... United States Departmen ...

Note: This page contains sample records for the topic "adapting onsite electrical" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Adapted Physical Education Handbook Acknowledgements  

E-Print Network (OSTI)

It would be very difficult to individually acknowledge all the contributors to this handbook. As I visited colleges around the state, I was always welcomed with open arms by the adapted physical education faculty and staff. Their willingness to take time from their very busy schedules to show me their adapted physical education programs, to fill-out and return a six-page survey, and to attend the regional workshops was most appreciated. This handbook would not have been possible without their contributions and daily efforts to improve programs and services for students with disabilities. I would like to acknowledge Scott Hamilton, Statewide DSP&S Coordinator for the California Community Colleges, for his thoughtful support and guidance throughout this project. I would also like to express my thanks to Noel Roberts, Statewide DSP&S Analyst, for her timely administrative assistance in making the handbook possible. I would especially like to acknowledge the professionalism and dedication of the Adapted Physical Education Handbook Project Task Group. The handbook would never have achieved the same impact and magnitude without the knowledge, experience, and expertise that Kathy Bell, Mark Clements, Jon James, Chuck Keller, Mark Lipe, Mary Martin, and Lee Miller Parks brought to this

Jim Haynes

2002-01-01T23:59:59.000Z

422

DOE HANDBOOK ELECTRICAL SAFETY  

E-Print Network (OSTI)

DOE HANDBOOK ELECTRICAL SAFETY U.S. Department of Energy AREA SAFT Washington, D.C. 20585 of 139 3.0 HAZARD ANALYSIS 3.1 INTRODUCTION This chapter provides tools for assessing electrical hazards error. This chapter does not provide an exhaustive list of sources of electrical energy

423

PHOTOVOLTAIC SOLAR ELECTRIC SYSTEM  

E-Print Network (OSTI)

CALIFORNIA ENERGY COMMISSION Buying a PHOTOVOLTAIC SOLAR ELECTRIC SYSTEM A Consumer Guide 2003 System: A Consumer Guide i Buying a Photovoltaic Solar Electric System A Consumer Guide California Energy water system that uses the sun's energy to heat water, solar electric or photovoltaic technology uses

Krothapalli, Anjaneyulu

424

Electrically charged pulsars  

E-Print Network (OSTI)

n the present work we investigate one possible variation on the usual electrically neutral pulsars: the inclusion of electric charge. We study the effect of electric charge in pulsars assuming that the charge distribution is proportional to the energy density. All calculations were performed for zero temperature and fixed entropy equations of state.

M. D. Alloy; D. P. Menezes

2007-04-24T23:59:59.000Z

425

Electrically charged pulsars  

E-Print Network (OSTI)

n the present work we investigate one possible variation on the usual electrically neutral pulsars: the inclusion of electric charge. We study the effect of electric charge in pulsars assuming that the charge distribution is proportional to the energy density. All calculations were performed for zero temperature and fixed entropy equations of state.

Alloy, M D

2007-01-01T23:59:59.000Z

426

CCPPolicyBriefing Electricity  

E-Print Network (OSTI)

LBNL-57942 ERNEST ORLANDO LAWRENCE BERKELEY NATIONAL LABORATORY The Effects of Electricity Tariff of Electricity Tariff Structure on Distributed Generation Adoption in New York State Prepared for the Distributed of Electricity Tariff Structure on Distributed Generation Adoption in New York State #12;The Effects

Feigon, Brooke

427

ELECTRICAL & COMPUTER ENGINEERING  

E-Print Network (OSTI)

Electrical, Computer, and Energy Engineering University of Colorado--Boulder Monday, April 2, 2012, 11:00 a an Associate Professor with the Department of Electrical Engineering, University of Colorado, Boulder. He hadELECTRICAL & COMPUTER ENGINEERING SEMINAR "A Random Walk on Image Patches" by Prof. Francois Meyer

428

Effect of F Impurity Concentration upon Electronic and Electrical ...  

Science Conference Proceedings (OSTI)

Author(s), Arvids Stashans, Freddy Marcillo. On-Site Speaker (Planned), Arvids Stashans. Abstract Scope, First-principles calculations based on the Density ...

429

Accelerating Electric Vehicle Deployment | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Accelerating Electric Vehicle Deployment Accelerating Electric Vehicle Deployment Accelerating Electric Vehicle Deployment Accelerating Electric Vehicle Deployment More Documents &...

430

Vehicle Technologies Office: Electrical Machines  

NLE Websites -- All DOE Office Websites (Extended Search)

Electrical Machines to Electrical Machines to someone by E-mail Share Vehicle Technologies Office: Electrical Machines on Facebook Tweet about Vehicle Technologies Office: Electrical Machines on Twitter Bookmark Vehicle Technologies Office: Electrical Machines on Google Bookmark Vehicle Technologies Office: Electrical Machines on Delicious Rank Vehicle Technologies Office: Electrical Machines on Digg Find More places to share Vehicle Technologies Office: Electrical Machines on AddThis.com... Just the Basics Hybrid & Vehicle Systems Energy Storage Advanced Power Electronics & Electrical Machines Power Electronics Electrical Machines Thermal Control & System Integration Advanced Combustion Engines Fuels & Lubricants Materials Technologies Electrical Machines Emphasis in the electrical machines activity is on advanced motor

431

Reliability and Competitive Electricity Markets  

E-Print Network (OSTI)

Behavior in a Competitive Electricity Market,” InternationalDemand Response in Electricity Markets,” Hewlett FoundationGreen, R. (1999) “The Electricity Contract Market in England

Joskow, Paul; Tirole, Jean

2004-01-01T23:59:59.000Z

432

The Case for Electric Vehicles  

E-Print Network (OSTI)

have put practical electric cars within reach, but politicsthat markets for electric cars might actually emergeratherTO CAR WorldResources Insnmte, 1994 TAKING CWARGE ELECTRIC

Sperling, Daniel

2001-01-01T23:59:59.000Z

433

Prospects for Neighborhood Electric Vehicles  

E-Print Network (OSTI)

improved, neighborhood electric cars will likely be seen aseven general-purpose electric cars. They con- size orgasoline-like electric cars, they wilt undoubtedlybecome

Sperling, Daniel

1994-01-01T23:59:59.000Z

434

Electric vehicles | Open Energy Information  

Open Energy Info (EERE)

Electric vehicles Jump to: navigation, search TODO: add content Electric vehicles first came into existence in the mid-19th century, when electricity was among the preferred...

435

Emission Impacts of Electric Vehicles  

E-Print Network (OSTI)

greenhouse effect, and electric vehicles," Proceedingso/9thInternational Electric Vehicles Symposium, 1988. 14. R. M.of 9th International Electric Vehicles Sympo- sium, 1988.

Wang, Quanlu; DeLuchi, Mark A.; Sperling, Daniel

1990-01-01T23:59:59.000Z

436

The Case for Electric Vehicles  

E-Print Network (OSTI)

land Press, 1995 TESTING ELECTRIC VEHICLE DEMAND IN " HYBRIDThe Case for Electric Vehicles DanieI Sperlmg Reprint UCTCor The Case for Electric Vehicles Darnel Sperling Institute

Sperling, Daniel

2001-01-01T23:59:59.000Z

437

Electric Power Monthly  

Gasoline and Diesel Fuel Update (EIA)

Electric Power Monthly > Electric Power Monthly Back Issues Electric Power Monthly > Electric Power Monthly Back Issues Electric Power Monthly Back Issues Monthly Excel files zipped 2010 January February March April May June July August September October November December 2009 January February March April May June July August September October November December 2008 January February March March Supplement April May June July August September October November December 2007 January February March April May June July August September October November December 2006 January February March April May June July August September October November December 2005 January February March April May June July August September October November December

438

EIA Electric Power Forms  

Gasoline and Diesel Fuel Update (EIA)

Electric Power Forms Electric Power Forms EIA Electric Power Forms Listing of Publicly Available and Confidential Data EIA's statistical surveys encompass each significant electric supply and demand activity in the United States. Most of the electric power survey forms resulting data elements are published, but respondent confidentiality is required. The chart below shows the data elements for each survey form and how each data element is treated in regard to confidentiality. Data Categories Data collection forms EIA- 411 EIA- 826 EIA- 860 EIA- 860M EIA- 861 EIA- 923 Frame Information Utility identification and iocation -- -- -- -- X -- Plant identification and iocation -- -- -- X -- X Generation and fuel Latitude and longitude -- -- X -- -- --

439

Electric car arrives - again  

Science Conference Proceedings (OSTI)

The first mass-produced electric cars in modern times are here, although they are expensive, limited in capability and unfamiliar to most prospective consumers. This article presents a brief history of the reintroduction of the modern electric car as well as discussions of the limitations of development, alternative routes to both producing and selling electric cars or some modified version of electric cars, economic incentives and governmental policies, and finally a snapshot description of the future for electric cars. 6 refs., 1 tab.

Dunn, S.

1997-03-01T23:59:59.000Z

440

Electricity Subsector Cybersecurity Capability Maturity Model...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Cybersecurity Electricity Subsector Cybersecurity Capability Maturity Model Electricity Subsector Cybersecurity Capability Maturity Model Electricity Advisory Committee...

Note: This page contains sample records for the topic "adapting onsite electrical" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Further Findings Concerning Electrical Energy Monitoring in an Industrial Plant  

E-Print Network (OSTI)

The Energy Systems Laboratory (ESL) at Texas A&M University has monitored the real-time electrical energy consumption, demand, and power factor of a large metal fabrication plant in Houston, Texas for twelve months. Monthly reports that present the data in a format that plant personnel find useful are discussed. These reports allow plant personnel to see how power factor correction in conjunction with production retrofits have reduced utility bills despite production capacity increases. The reports have also been useful in detecting maintenance problems and monitoring productivity. A method that allows the calculation of power factor correction savings after correction is discussed. This method requires some power factor versus demand history prior to correction, and is used to determine what the demand would have been if the correction equipment had not been installed, even if the real demand of the plant changes. Major plant electrical modifications and their impact on a monitoring system are also discussed. Such modifications increase the potential for technical problems with the monitoring equipment and result in hard-to-find problems. A future step to be examined is one that uses visual or audible warning devices in the plant to control demand. At least one plant has adopted this idea in the form of warning lights that inform employees to shut down unnecessary equipment. This concept appears to be potentially beneficial to all plants which have some type of demand monitoring device on-site.

Lewis, D. R.; Dorhofer, F. J.; Heffington, W. M.

1995-04-01T23:59:59.000Z

442

The model electric restaurant  

SciTech Connect

Restaurants are the most intensive users of energy of all types of commercial buildings. As a result, they have some of the highest energy costs. New and existing restaurants are important customers to electric utilities. Many opportunities exist to use electricity to improve restaurant energy performance. This report discusses a project in which computer simulations were used to investigate restaurant energy subsystem performance and to assess the potential for electric equipment to reduce energy consumption, reduce peak demand improve load factors, and reduce energy cost in new all-electric restaurants. The project investigated typical restaurant designs for all-electric and gas/electric facilities and compared them to high efficiency electric options in all-electric restaurants. This analysis determined which investiments in high-efficiency electric equipment are attractive for restaurant operators. Improved equipment for food preparation, heating and cooling, ventilation, sanitation, and lighting subsystem was studied in cafeteria, full menu, fast food, and pizza restaurants in Atlanta, Cleveland, Los Angeles, and Phoenix. In addition to the actual rate structures, four synthetic rate structures were used to calculate energy costs, so that the results can be applied to other locations. The results indicate that high efficiency and improved all-electric equipment have the potential for significantly reducing energy consumption, peak demand, and operating costs in almost all restaurants in all locations. The all-electric restaurants, with a combination of improved equipment, also offer the customer a competitive choice in fuels in most locations. 12 refs., 26 figs., 55 tabs.

Frey, D.J.; Oatman, P.A. (Architectural Energy Corp., Boulder, CO (USA)); Claar, C.N. (Pennsylvania State Univ., University Park, PA (USA))

1989-12-01T23:59:59.000Z

443

Adaptive Comfort Model: Simulations & Future Directions  

NLE Websites -- All DOE Office Websites (Extended Search)

Adaptive Comfort Model: Simulations & Future Directions Adaptive Comfort Model: Simulations & Future Directions Speaker(s): Richard de Dear Date: February 4, 2011 - 12:00pm Location: 90-4133 Seminar Host/Point of Contact: Philip Haves The last 20 years of thermal comfort have witnessed a shift away from the "static" approach (exemplified by the PMV/PPD model) towards the adaptive approach (exemplified by the adaptive models in ASHRAE's Standard 55 (2004, 2010) and the European Union's counterpart standard, EN15251 (2007). - the basis and derivation of the adaptive comfort model - adaptive comfort standards (ASHRAE 55 and EN15251) - new developments and directions (reporting back from the January 2011 ASHRAE Meeting of SSPC-55 in Las Vegas) - environmental variables other than dry bulb, in the adaptive model

444

Electricity Monthly Update  

Gasoline and Diesel Fuel Update (EIA)

Methodology and Documentation Methodology and Documentation General The Electricity Monthly Update is prepared by the Electric Power Operations Team, Office of Electricity, Renewables and Uranium Statistics, U.S. Energy Information Administration (EIA), U.S. Department of Energy. Data published in the Electricity Monthly Update are compiled from the following sources: U.S. Energy Information Administration, Form EIA-826,"Monthly Electric Utility Sales and Revenues with State Distributions Report," U.S. Energy Information Administration, Form EIA-923, "Power Plant Operations Report," fuel spot prices from Bloomberg Energy, electric power prices from SNL Energy, electric system demand data from Ventyx Energy Velocity Suite, and weather data and imagery from the National Oceanic and Atmospheric

445

EIA - Electric Power Data  

U.S. Energy Information Administration (EIA) Indexed Site

Survey-level Detail Data Files Survey-level Detail Data Files Electric power data are collected on survey instruments. Data collection is mandated by Congress to promote sound policymaking, efficient markets, and public understanding. The most widely used data are disseminated in reports, such as the Electric Power Monthly and the Electric Power Annual. Publicly available electric power data is available down to the plant level in the Electricity Data Browser and in detailed spreadsheets by survey below. Description Data availability State-level data (consolidated across forms) Contains electricity generation; fuel consumption; emissions; retail sales, revenue, number of customers, and retail prices; generating capacity; and financial data. 1990-2012 (monthly and annual) Electric power sales and revenue data - monthly (Form EIA-826)

446

Electricity Monthly Update  

Gasoline and Diesel Fuel Update (EIA)

Methodology and Documentation Methodology and Documentation General The Electricity Monthly Update is prepared by the Electric Power Operations Team, Office of Electricity, Renewables and Uranium Statistics, U.S. Energy Information Administration (EIA), U.S. Department of Energy. Data published in the Electricity Monthly Update are compiled from the following sources: U.S. Energy Information Administration, Form EIA-826,"Monthly Electric Utility Sales and Revenues with State Distributions Report," U.S. Energy Information Administration, Form EIA-923, "Power Plant Operations Report," fuel spot prices from Bloomberg Energy, electric power prices from SNL Energy, electric system demand data from Ventyx Energy Velocity Suite, and weather data and imagery from the National Oceanic and Atmospheric

447

Electricity Monthly Update  

Gasoline and Diesel Fuel Update (EIA)

Methodology and Documentation Methodology and Documentation General The Electricity Monthly Update is prepared by the Electric Power Operations Team, Office of Electricity, Renewables and Uranium Statistics, U.S. Energy Information Administration (EIA), U.S. Department of Energy. Data published in the Electricity Monthly Update are compiled from the following sources: U.S. Energy Information Administration, Form EIA-826,"Monthly Electric Utility Sales and Revenues with State Distributions Report," U.S. Energy Information Administration, Form EIA-923, "Power Plant Operations Report," fuel spot prices from Bloomberg Energy, electric power prices from SNL Energy, electric system demand data from Ventyx Energy Velocity Suite, and weather data and imagery from the National Oceanic and Atmospheric

448

Electricity Monthly Update  

Gasoline and Diesel Fuel Update (EIA)

Methodology and Documentation Methodology and Documentation General The Electricity Monthly Update is prepared by the Electric Power Operations Team, Office of Electricity, Renewables and Uranium Statistics, U.S. Energy Information Administration (EIA), U.S. Department of Energy. Data published in the Electricity Monthly Update are compiled from the following sources: U.S. Energy Information Administration, Form EIA-826,"Monthly Electric Utility Sales and Revenues with State Distributions Report," U.S. Energy Information Administration, Form EIA-923, "Power Plant Operations Report," fuel spot prices from Bloomberg Energy, electric power prices from SNL Energy, electric system demand data from Ventyx Energy Velocity Suite, and weather data and imagery from the National Oceanic and Atmospheric

449

Electricity Monthly Update  

Gasoline and Diesel Fuel Update (EIA)

Methodology and Documentation Methodology and Documentation General The Electricity Monthly Update is prepared by the Electric Power Operations Team, Office of Electricity, Renewables and Uranium Statistics, U.S. Energy Information Administration (EIA), U.S. Department of Energy. Data published in the Electricity Monthly Update are compiled from the following sources: U.S. Energy Information Administration, Form EIA-826,"Monthly Electric Utility Sales and Revenues with State Distributions Report," U.S. Energy Information Administration, Form EIA-923, "Power Plant Operations Report," fuel spot prices from Bloomberg Energy, electric power prices from SNL Energy, electric system demand data from Ventyx Energy Velocity Suite, and weather data and imagery from the National Oceanic and Atmospheric

450

Electricity Monthly Update  

Gasoline and Diesel Fuel Update (EIA)

Methodology and Documentation Methodology and Documentation General The Electricity Monthly Update is prepared by the Electric Power Operations Team, Office of Electricity, Renewables and Uranium Statistics, U.S. Energy Information Administration (EIA), U.S. Department of Energy. Data published in the Electricity Monthly Update are compiled from the following sources: U.S. Energy Information Administration, Form EIA-826,"Monthly Electric Utility Sales and Revenues with State Distributions Report," U.S. Energy Information Administration, Form EIA-923, "Power Plant Operations Report," fuel spot prices from Bloomberg Energy, electric power prices from SNL Energy, electric system demand data from Ventyx Energy Velocity Suite, and weather data and imagery from the National Oceanic and Atmospheric

451

Electricity Monthly Update  

Gasoline and Diesel Fuel Update (EIA)

Methodology and Documentation Methodology and Documentation General The Electricity Monthly Update is prepared by the Electric Power Operations Team, Office of Electricity, Renewables and Uranium Statistics, U.S. Energy Information Administration (EIA), U.S. Department of Energy. Data published in the Electricity Monthly Update are compiled from the following sources: U.S. Energy Information Administration, Form EIA-826,"Monthly Electric Utility Sales and Revenues with State Distributions Report," U.S. Energy Information Administration, Form EIA-923, "Power Plant Operations Report," fuel spot prices from Bloomberg Energy, electric power prices from SNL Energy, electric system demand data from Ventyx Energy Velocity Suite, and weather data and imagery from the National Oceanic and Atmospheric

452

Electricity Monthly Update  

Gasoline and Diesel Fuel Update (EIA)

Methodology and Documentation Methodology and Documentation General The Electricity Monthly Update is prepared by the Electric Power Operations Team, Office of Electricity, Renewables and Uranium Statistics, U.S. Energy Information Administration (EIA), U.S. Department of Energy. Data published in the Electricity Monthly Update are compiled from the following sources: U.S. Energy Information Administration, Form EIA-826,"Monthly Electric Utility Sales and Revenues with State Distributions Report," U.S. Energy Information Administration, Form EIA-923, "Power Plant Operations Report," fuel spot prices from Bloomberg Energy, electric power prices from SNL Energy, electric system demand data from Ventyx Energy Velocity Suite, and weather data and imagery from the National Oceanic and Atmospheric

453

Electricity Monthly Update  

Gasoline and Diesel Fuel Update (EIA)

Methodology and Documentation Methodology and Documentation General The Electricity Monthly Update is prepared by the Electric Power Operations Team, Office of Electricity, Renewables and Uranium Statistics, U.S. Energy Information Administration (EIA), U.S. Department of Energy. Data published in the Electricity Monthly Update are compiled from the following sources: U.S. Energy Information Administration, Form EIA-826,"Monthly Electric Utility Sales and Revenues with State Distributions Report," U.S. Energy Information Administration, Form EIA-923, "Power Plant Operations Report," fuel spot prices from Bloomberg Energy, electric power prices from SNL Energy, electric system demand data from Ventyx Energy Velocity Suite, and weather data and imagery from the National Oceanic and Atmospheric

454

Electricity Grid: Impacts of Plug-In Electric Vehicle Charging  

E-Print Network (OSTI)

hybrid electric vehicles (PHEVs) and battery electric vehicles (BEVs), are among the most promising of the advanced vehicle

Yang, Christopher; McCarthy, Ryan

2009-01-01T23:59:59.000Z

455

Uganda-National Adaptation Programme of Action | Open Energy...  

Open Energy Info (EERE)

Adaptation Programme of Action AgencyCompany Organization United Nations Environment Programme, Global Environment Facility, Environmental Alert Topics Adaptation,...

456

Tanzania-National Adaptation Programme of Action | Open Energy...  

Open Energy Info (EERE)

Adaptation Programme of Action AgencyCompany Organization United Nations Environment Programme, Global Environment Facility Topics Adaptation, Background analysis...

457

Electric:DielectricPermittivity:Isotropic  

Science Conference Proceedings (OSTI)

... OOF2: The Manual. Electric:DielectricPermittivity:Isotropic. ... Name. Electric:DielectricPermittivity:Isotropic — Isotropic dielectric permittivity. Details. ...

2013-07-05T23:59:59.000Z

458

Applied Electrical Metrology Group Homepage  

Science Conference Proceedings (OSTI)

... Electric Power Metrology and the Smart Grid—Our country's way of life depends on the electric power distribution system. ...

2012-08-08T23:59:59.000Z

459

Electricity Monthly Update  

Gasoline and Diesel Fuel Update (EIA)

End Use: March 2012 End Use: March 2012 Retail Rates/Prices and Consumption In this section, we look at what electricity costs and how much is purchased. Charges for retail electric service are based primarily on rates approved by State regulators. However, a number of States have allowed retail marketers to compete to serve customers and these competitive retail suppliers offer electricity at a market-based price. EIA does not directly collect retail electricity rates or prices. However, using data collected on retail sales revenues and volumes, we calculate average retail revenues per kWh as a proxy for retail rates and prices. Retail sales volumes are presented as a proxy for end-use electricity consumption. Average Revenue per kWh by State Percent Change ¢ Per KWh map showing U.S. electric industry percent change in average revenue

460

Electricity Monthly Update  

Gasoline and Diesel Fuel Update (EIA)

End Use: September 2011 End Use: September 2011 Retail Rates/Prices and Consumption In this section, we look at what electricity costs and how much is purchased. Charges for retail electric service are based primarily on rates approved by State regulators. However, a number of states have allowed retail marketers to compete to serve customers and these competitive retail suppliers offer electricity at a market-based price. EIA does not directly collect retail electricity rates or prices. However, using data on retail sales revenues and volumes, we calculate average retail revenues per kWh as a proxy for retail rates and prices. Retail sales volumes are presented as a proxy for end-use electricity consumption. Average Revenue per kWh by State Percent Change ¢ Per KWh map showing U.S. electric industry percent change in average revenue

Note: This page contains sample records for the topic "adapting onsite electrical" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Electricity Monthly Update  

Gasoline and Diesel Fuel Update (EIA)

End Use: October 2013 End Use: October 2013 Retail Rates/Prices and Consumption In this section, we look at what electricity costs and how much is purchased. Charges for retail electric service are based primarily on rates approved by state regulators. However, a number of states have allowed retail marketers to compete to serve customers and these competitive retail suppliers offer electricity at a market-based price. EIA does not directly collect retail electricity rates or prices. However, using data collected on retail sales revenues and volumes, we calculate average retail revenues per kWh as a proxy for retail rates and prices. Retail sales volumes are presented as a proxy for end-use electricity consumption. Average Revenue per kWh by state Percent Change ¢ Per KWh map showing U.S. electric industry percent change in average revenue

462

Electricity Monthly Update  

Gasoline and Diesel Fuel Update (EIA)

End Use: January 2012 End Use: January 2012 Retail Rates/Prices and Consumption In this section, we look at what electricity costs and how much is purchased. Charges for retail electric service are based primarily on rates approved by state regulators. However, a number of states have allowed retail marketers to compete to serve customers and these competitive retail suppliers offer electricity at a market-based price. EIA does not directly collect retail electricity rates or prices. However, using data collected on retail sales revenues and volumes, we calculate average retail revenues per kWh as a proxy for retail rates and prices. Retail sales volumes are presented as a proxy for end-use electricity consumption. Average Revenue per kWh by State Percent Change ¢ Per KWh map showing U.S. electric industry percent change in average revenue

463

Electrical system architecture  

DOE Patents (OSTI)

An electrical system for a vehicle includes a first power source generating a first voltage level, the first power source being in electrical communication with a first bus. A second power source generates a second voltage level greater than the first voltage level, the second power source being in electrical communication with a second bus. A starter generator may be configured to provide power to at least one of the first bus and the second bus, and at least one additional power source may be configured to provide power to at least one of the first bus and the second bus. The electrical system also includes at least one power consumer in electrical communication with the first bus and at least one power consumer in electrical communication with the second bus.

Algrain, Marcelo C. (Peoria, IL); Johnson, Kris W. (Washington, IL); Akasam, Sivaprasad (Peoria, IL); Hoff, Brian D. (East Peoria, IL)

2008-07-15T23:59:59.000Z

464

Electricity Monthly Update  

Gasoline and Diesel Fuel Update (EIA)

Electric Power Sector Coal Stocks: January 2012 Electric Power Sector Coal Stocks: January 2012 Stocks Above normal temperatures in January have allowed electric utilities to significantly replinish stockpiles of coal. The upswing in coal stockpiles corresponds to decreasing consumption of coal at electric generators seen in the resource use section across all regions of the country. Days of Burn Days of burn Coal capacity The average number of days of burn held at electric power plants is a forward looking estimate of coal supply given a power plant's current stockpile and past consumption patterns. Along with coal stockpiles at electric power plants, the supply of coal significantly increased in January of 2012. Total bituminous coal days of burn increased 10 percent from January 2011 to 87, while subbituminous supply increased nearly 10

465

Electricity Monthly Update  

Gasoline and Diesel Fuel Update (EIA)

End Use: December 2011 End Use: December 2011 Retail Rates/Prices and Consumption In this section, we look at what electricity costs and how much is purchased. Charges for retail electric service are based primarily on rates approved by state regulators. However, a number of states have allowed retail marketers to compete to serve customers and these competitive retail suppliers offer electricity at a market-based price. EIA does not directly collect retail electricity rates or prices. However, using data collected on retail sales revenues and volumes, we calculate average retail revenues per kWh as a proxy for retail rates and prices. Retail sales volumes are presented as a proxy for end-use electricity consumption. Average Revenue per kWh by State Percent Change ¢ Per KWh map showing U.S. electric industry percent change in average revenue

466

Electricity Monthly Update  

Gasoline and Diesel Fuel Update (EIA)

End Use: August 2011 End Use: August 2011 Retail Rates/Prices and Consumption In this section, we look at what electricity costs and how much is purchased. Charges for retail electric service are based primarily on rates approved by State regulators. However, a number of states have allowed retail marketers to compete to serve customers and these competitive retail suppliers offer electricity at a market-based price. EIA does not directly collect retail electricity rates or prices. However, using data on retail sales revenues and volumes, we calculate average retail revenues per kWh as a proxy for retail rates and prices. Retail sales volumes are presented as a proxy for end-use electricity consumption. Average revenue per kWh by state Percent Change ¢ Per KWh map showing U.S. electric industry percent change in average revenue

467

Electricity Monthly Update  

Gasoline and Diesel Fuel Update (EIA)

End Use: November 2011 End Use: November 2011 Retail Rates/Prices and Consumption In this section, we look at what electricity costs and how much is purchased. Charges for retail electric service are based primarily on rates approved by state regulators. However, a number of states have allowed retail marketers to compete to serve customers and these competitive retail suppliers offer electricity at a market-based price. EIA does not directly collect retail electricity rates or prices. However, using data collected on retail sales revenues and volumes, we calculate average retail revenues per kWh as a proxy for retail rates and prices. Retail sales volumes are presented as a proxy for end-use electricity consumption. Average Revenue per kWh by State Percent Change ¢ Per KWh map showing U.S. electric industry percent change in average revenue

468

Electricity Monthly Update  

Gasoline and Diesel Fuel Update (EIA)

End Use: February 2012 End Use: February 2012 Retail Rates/Prices and Consumption In this section, we look at what electricity costs and how much is purchased. Charges for retail electric service are based primarily on rates approved by State regulators. However, a number of States have allowed retail marketers to compete to serve customers and these competitive retail suppliers offer electricity at a market-based price. EIA does not directly collect retail electricity rates or prices. However, using data collected on retail sales revenues and volumes, we calculate average retail revenues per kWh as a proxy for retail rates and prices. Retail sales volumes are presented as a proxy for end-use electricity consumption. Average Revenue per kWh by State Percent Change ¢ Per KWh map showing U.S. electric industry percent change in average revenue

469

Electric Utility Industry Update  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Electric Utility Industry Update Electric Utility Industry Update Steve Kiesner Director, National Customer Markets Edison Electric Institute FUPWG Spring 2012 April 12, 2012 Edison Electric Institute ï‚› Investor-Owned Electric Companies ï‚› Membership includes ï‚› 200 US companies, ï‚› More than 65 international affiliates and ï‚› 170 associates ï‚› US members ï‚› Serve more than 95% of the ultimate customers in the investor-owned segment of the industry and ï‚› Nearly 70% of all electric utility ultimate customers, and ï‚› Our mission focuses on advocating public policy; expanding market opportunities; and providing strategic business information Agenda ï‚›Significant Industry Trends ï‚›Utility Infrastructure Investments ï‚›Generation and Fuel Landscape

470

Electricity Monthly Update  

Gasoline and Diesel Fuel Update (EIA)

End Use: October 2011 End Use: October 2011 Retail Rates/Prices and Consumption In this section, we look at what electricity costs and how much is purchased. Charges for retail electric service are based primarily on rates approved by state regulators. However, a number of states have allowed retail marketers to compete to serve customers and these competitive retail suppliers offer electricity at a market-based price. EIA does not directly collect retail electricity rates or prices. However, using data collected on retail sales revenues and volumes, we calculate average retail revenues per kWh as a proxy for retail rates and prices. Retail sales volumes are presented as a proxy for end-use electricity consumption. Average Revenue per kWh by State Percent Change ¢ Per KWh map showing U.S. electric industry percent change in average revenue

471

Electric power monthly  

SciTech Connect

The Energy Information Administration (EIA) prepares the Electric Power Monthly (EPM) for a wide audience including Congress, Federal and State agencies, the electric utility industry, and the general public. This publication provides monthly statistics for net generation, fossil fuel consumption and stocks, quantity and quality of fossil fuels, cost of fossil fuels, electricity sales, revenue, and average revenue per kilowatthour of electricity sold. Data on net generation, fuel consumption, fuel stocks, quantity and cost of fossil fuels are also displayed for the North American Electric Reliability Council (NERC) regions. The EIA publishes statistics in the EPM on net generation by energy source, consumption, stocks, quantity, quality, and cost of fossil fuels; and capability of new generating units by company and plant. The purpose of this publication is to provide energy decisionmakers with accurate and timely information that may be used in forming various perspectives on electric issues that lie ahead.

1995-08-01T23:59:59.000Z

472

Electric and Hybrid Electric Vehicle Sales: December 2010 - June 2013 |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Electric and Hybrid Electric Vehicle Sales: December 2010 - June Electric and Hybrid Electric Vehicle Sales: December 2010 - June 2013 Electric and Hybrid Electric Vehicle Sales: December 2010 - June 2013 Sales data for various models of electric and hybrid electric vehicles from December 2010 through June 2013. 062010-092013_EV_HEV Sales.xlsx Description Electric and Hybrid Electric Vehicle Sales: December 2010 - June 2013 (Excel) 062010-092013_EV_HEV Sales.csv Description Electric and Hybrid Electric Vehicle Sales: December 2010 - June 2013 (CSV) 062010-092013_EV_HEV Sales.jpeg Description Chart of Electric and Hybrid Electric Vehicle Sales: December 2010 - June 2013 (JPG) More Documents & Publications Federal Reporting Recipient Information Natural Gas Imports and Exports - Second Quarter Report 2013 Federal Reporting Recipient Information

473

Electric and Hybrid Electric Vehicle Sales: December 2010 - June 2013 |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Electric and Hybrid Electric Vehicle Sales: December 2010 - June Electric and Hybrid Electric Vehicle Sales: December 2010 - June 2013 Electric and Hybrid Electric Vehicle Sales: December 2010 - June 2013 Sales data for various models of electric and hybrid electric vehicles from December 2010 through June 2013. 062010-092013_EV_HEV Sales.xlsx Description Electric and Hybrid Electric Vehicle Sales: December 2010 - June 2013 (Excel) 062010-092013_EV_HEV Sales.csv Description Electric and Hybrid Electric Vehicle Sales: December 2010 - June 2013 (CSV) 062010-092013_EV_HEV Sales.jpeg Description Chart of Electric and Hybrid Electric Vehicle Sales: December 2010 - June 2013 (JPG) More Documents & Publications Federal Reporting Recipient Information Natural Gas Imports and Exports - Second Quarter Report 2013 Federal Reporting Recipient Information

474

ELECTRIC BLASTING INITIATOR  

SciTech Connect

An electric blasting initiator comprises a shell, a high explosive material within the shell, and an exploding bridge wire in contact with said explosive material. (AEC)

Johnston, L.H.

1962-06-26T23:59:59.000Z

475

Electric power annual 1992  

SciTech Connect

The Electric Power Annual presents a summary of electric utility statistics at national, regional and State levels. The objective of the publication is to provide industry decisionmakers, government policymakers, analysts and the general public with historical data that may be used in understanding US electricity markets. The Electric Power Annual is prepared by the Survey Management Division; Office of Coal, Nuclear, Electric and Alternate Fuels; Energy Information Administration (EIA); US Department of Energy. ``The US Electric Power Industry at a Glance`` section presents a profile of the electric power industry ownership and performance, and a review of key statistics for the year. Subsequent sections present data on generating capability, including proposed capability additions; net generation; fossil-fuel statistics; retail sales; revenue; financial statistics; environmental statistics; electric power transactions; demand-side management; and nonutility power producers. In addition, the appendices provide supplemental data on major disturbances and unusual occurrences in US electricity power systems. Each section contains related text and tables and refers the reader to the appropriate publication that contains more detailed data on the subject matter. Monetary values in this publication are expressed in nominal terms.

Not Available

1994-01-06T23:59:59.000Z

476

2012 National Electricity Forum  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

National Electric Transmission Congestion Study Workshop - December 15, 2011 Sheraton San Diego Hotel & Marina, 1380 Harbor Island Drive, San Diego, California 92101 Agenda 8:00 am...

477

Electricity Advisory Committee  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Electricity Advisory Committee Meeting Electricity Advisory Committee Meeting Sheraton National Hotel May 20, 2008 Minutes Members Present: Linda Stuntz, Esquire, Stuntz, Davis, and Staffier, P.C. (Chair) Yakout Mansour, California ISO (Vice Chair) Paul J. Allen, Constellation Energy Guido Bartels, IBM Gerry Cauley, SERC Reliability Corporation Jose Delgado, American Transmission Company The Honorable Jeanne Fox, New Jersey Board of Public Utilities Rob Gramlich, American Wind Energy Association The Honorable Dian Grueneich, California Public Utilities Commission Michael Heyeck, American Electric Power Hunter Hunt, Sharyland Utilities Susan Kelly, American Public Power Association Irwin Kowenski, Occidental Energy Ventures Corporation Barry Lawson, National Rural Electric Cooperative Association

478

EIA - Electric Power Data  

U.S. Energy Information Administration (EIA)

... 423 and FERC-423) Contains data on electricity generation, fuel consumption, useful thermal output, fossil fuel stocks, fuel deliveries, quantity delivered, ...

479

Efficiency of Electric Motors  

Science Conference Proceedings (OSTI)

... the EEM program addresses testing the efficiency of electric ... 1 of Canadian Standards Association (CSA) Standard C390, 'Energy Efficient Test ...

2013-08-16T23:59:59.000Z

480

Electric Power Annual  

U.S. Energy Information Administration (EIA) Indexed Site

Report;" and predecessor forms. Imports and Exports: Mexico data - DOE, Fossil Fuels, Office of Fuels Programs, Form OE-781R, "Annual Report of International Electrical Export...

Note: This page contains sample records for the topic "adapting onsite electrical" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Electric Power Annual  

U.S. Energy Information Administration (EIA) Indexed Site

for Load by North American Electric Reliability Corporation Assessment Area, 2011 Actual, 2012-2016 Projected Net Energy (Thousands of Megawatthours) Eastern Interconnection ERCOT...

482

Electric Power Annual  

U.S. Energy Information Administration (EIA) Indexed Site

1. Receipts and Quality of Coal by Rank Delivered for Electricity Generation: Total (All Sectors) by State, 2011 Bituminous Subbituminous Lignite Census Division and State Receipts...

483

Texas Electricity Restructuring Active  

U.S. Energy Information Administration (EIA)

Under these two bills, a pilot program would first need to prove that electricity deregulation would lower rates before the entire service area could be deregulated.

484

Electricity Supply Sector  

U.S. Energy Information Administration (EIA)

Electricity Supply Sector Part 1 of 6 Supporting Documents Sector-Specific Issues and Reporting Methodologies Supporting the General Guidelines for the Voluntary

485

National Electrical Manufacturers Association  

Science Conference Proceedings (OSTI)

... as fire safety and factory automation to cosponsoring ... This device, which was approved not long ... the new electric power distribution transformers that ...

2010-10-05T23:59:59.000Z

486

Electric Vehicle Public Charging -  

NLE Websites -- All DOE Office Websites (Extended Search)

Electric Vehicle Public Charging - Time vs. Energy March, 2013 A critical factor for successful PEV adoption is the deployment and use of charging infrastructure in non-...

487

Electric Vehicle Fleet  

NLE Websites -- All DOE Office Websites (Extended Search)

A98 0577 Electric Vehicle Fleet Operations in the United States Jim Francfort Presented to: 31st International Symposium on Automotive Technology and Automation Dusseldorf, Germany...

488

Electric Power Monthly  

U.S. Energy Information Administration (EIA)

Electric Power Monthly with Data for October 2012. December 2012 . Independent Statistics & Analysis . www.eia.gov . U.S. Department of Energy . ...

489

Electric Power Monthly  

U.S. Energy Information Administration (EIA)

Electric Power Monthly with Data for August 2012. October 2012 . Independent Statistics & Analysis . www.eia.gov . U.S. Department of Energy . ...

490

2014 Electricity Form Proposals  

U.S. Energy Information Administration (EIA)

Financial market analysis and financial data for major energy companies. Environment. ... “Monthly Electric Utility Sales and ... an increase in the number of ...

491

Electrically Deformable Liquid Marbles  

E-Print Network (OSTI)

Liquid marbles, which are droplets coated with a hydrophobic powder, were exposed to a uniform electric field. It was established that a threshold value of the electric field, 15 cgse, should be surmounted for deformation of liquid marbles. The shape of the marbles was described as a prolate spheroid. The semi-quantitative theory describing deformation of liquid marbles in a uniform electric field is presented. The scaling law relating the radius of the contact area of the marble to the applied electric field shows a satisfactory agreement with the experimental data.

Edward Bormashenko; Roman Pogreb; Tamir Stein; Gene Whyman; Marcelo Schiffer; Doron Aurbach

2011-02-17T23:59:59.000Z

492

Electricity & Energy Reliability  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

ENERGY RELIABILITY Human Capital Management Strategic Plan FY2007 Office of Electricity Delivery and Energy Reliability Human Capital Management Strategic Plan September 2006...

493

2012 National Electricity Forum  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

2011 National Electric Transmission Congestion Study Workshop - December 6, 2011 Hilton Philadelphia Airport, 4509 Island Avenue, Philadelphia, PA 19153 Hilton Philadelphia...

494

ELECTRICITY APPENDIX D-4  

E-Print Network (OSTI)

.4 3.4 3.4 3.3 3.3 3.2 3.2 3.2 3.1 3.1 3.0 3.0 2.9 2.9 2.9 2.8 2.7 Industrial Sector Electricity Bill.92 Industrial coking 25.29 0.99 25.55 Other industrial 25.35 0.99 25.61 electric utility 25.48 0.99 25ELECTRICITY APPENDIX D-4 DETAILED RESULTS APPENDIX D #12;Electricity Sector Forecast Summary Page 1

495

Electric Power Annual  

U.S. Energy Information Administration (EIA) Indexed Site

5. Receipts, Average Cost, and Quality of Fossil Fuels: Electric Utilities, 2002 - 2011 Coal Petroleum Liquids Receipts Average Cost Receipts Average Cost Period (Billion Btu)...

496

Electric Power Annual  

Annual Energy Outlook 2012 (EIA)

4. Weighted Average Cost of Fossil Fuels for the Electric Power Industry, 2002 through 2011 Coal Petroleum Natural Gas Total Fossil Bituminous Subbituminous Lignite All Coal Ranks...

497

2012 National Electricity Forum  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

1 U.S. Department of Energy 2012 National Electric Transmission Congestion Study Western Regional Workshops December 13, 2011 - Portland, Oregon Sheraton Portland Airport Hotel...

498

Electric Power Annual 2004  

U.S. Energy Information Administration (EIA)

Energy Information Administration/Electric Power Annual 2004 iii Contacts Questions regarding this report may be directed to: Energy Information Administration, EI-53

499

Capacity Markets for Electricity  

E-Print Network (OSTI)

ternative Approaches for Power Capacity Markets”, Papers andand Steven Stoft, “Installed Capacity and Price Caps: Oil onElectricity Markets Have a Capacity requirement? If So, How

Creti, Anna; Fabra, Natalia

2004-01-01T23:59:59.000Z

500

Electric Power Annual 2011  

U.S. Energy Information Administration (EIA) Indexed Site

4.A. Summer net internal demand, capacity resources, and capacity margins by North American Electric Reliability Corporation Region" "1999 through 2011 actual, 2012-2016 projected"...