Powered by Deep Web Technologies
Note: This page contains sample records for the topic "ada carbon solutions" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

ADA Retrofit and Construction  

E-Print Network [OSTI]

ADA Retrofit and Construction Management Richfield, MN Breckenridge, MN #12;Introduction & Outline Design vs. Construction § Case Studies § City of Richfield's Transition Plan #12;How Detailed Should, MN #12;Case Study Breckenridge, MN #12;§ Construction Plans § Intersection Details for "tough

Minnesota, University of

2

Plutonium recovery from carbonate wash solutions  

SciTech Connect (OSTI)

Periodically higher than expected levels of plutonium are found in carbonate solutions used to wash second plutonium cycle solvent. The recent accumulation of plutonium in carbonate wash solutions has led to studies to determine the cause of that plutonium accumulation, to evaluate the quality of all canyon solvents, and to develop additional criteria needed to establish when solvent quality is acceptable. Solvent from three canyon solvent extraction cycles was used to evaluate technology required to measure tributyl phosphate (TBP) degradation products and was used to evaluate solvent quality criteria during the development of plutonium recovery processes. 1 fig.

Gray, J.H.; Reif, D.J.; Chostner, D.F.; Holcomb, H.P.

1991-12-31T23:59:59.000Z

3

alkyl carbonate solution: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

R. 13 Solution-processed single walled carbon nanotube electrodes for organic thin-film transistors Physics Websites Summary: t Airbrushed single walled carbon nanotube...

4

First Carbon Solutions | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublicIDAPowerPlantSitingConstruction.pdfNotify98.pdf Jump to:Siting.pdf JumpFirelands Electric Coop,CapitolCarbon

5

Carbon Solutions Group | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160Benin: EnergyBostonFacility | OpenCarboPur Technologies JumpJungle JumpLLC JumpCarbon

6

Behavior of carbon isotopes during the hyperfiltration of calcium carbonate solutions through calcium bentonites  

E-Print Network [OSTI]

(aq) The 1sotopic ratio of the effluent gave no clue to the possible occurrence of any fractionation of carbon 1sotopes. The solution retained on the high pressure s1de of the membrane was found to have an increased calcium concentration, as would... pressure side of the membrane (Co) to the calcium concentration of the stock solution (C;). 4 Comparison of the log pCO2 of the stock solution and the first effluent solution 14 20 22 5 Calculated values for the 6 C of the solution in the high...

Hinz, David William

1987-01-01T23:59:59.000Z

7

E-Print Network 3.0 - ammonia-ammonium carbonate solution Sample...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Cedex, France Summary: to be adjusted to each application's requirements. Carbon aerogels are considered to be a very promising solution... Nanostructured carbon for...

8

The resistance of recent marine carbonate sediments to solution  

E-Print Network [OSTI]

H of the solution from about 8?0 at 1 week to 8. 2 at 10 weeks. C H A P T E R I V CONCLUSIONS The results of this study indicate: l. The grain size of recent marine carbonate sediments have ++ ++ no relationship to the amount of Ca or Mg dissolved... sediment samples ++ t3 Dissolved Mg from unground marine carbonate sediment samples C5 UJ o CO (0 C3 I. O 0. 8 0. 6 0. 4 ~E 0. 2 o. o 0 ~ ~ ai 0 ? ~ ? ~ 0 2 4 % MgCOp IN THE SAMPLE IO 12 C) Ld O U) C5 E I. O 0. 8 0. 6 0. 4...

Jansen, John F

1962-01-01T23:59:59.000Z

9

ada: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

and 2.3 (i, Finalize, Swap, and Display. The package BuiltInTypes supplies these operations for Ada's built-in scalar Initialize, Finalize, Swap, Copy, TestIfEqual and...

10

Ada Yonath: Another Pioneering Woman in Science | Department...  

Broader source: Energy.gov (indexed) [DOE]

Pioneering Woman in Science March 25, 2011 - 4:51pm Addthis Nobel Prize winner in Chemistry, Ada Yonath | Credit nobelprize.org Nobel Prize winner in Chemistry, Ada Yonath |...

11

Sorption of uranium from nitric acid solution using TBP-impregnated activated carbons  

SciTech Connect (OSTI)

The concept of extraction chromatography has been used to study the sorption of uranium from nitric acid solutions using tri-n-butyl phosphate (TBP) impregnated activated carbons. Batch equilibrium data and kinetic and breakthrough column behavior of uranium are reported. Wood based activated carbon has shown better capacity and breakthrough characteristics than shell based activated carbon. Sorption rate on impregnated carbons was relatively slow indicating that diffusion is the rate controlling step within the pore structure of the activated carbon. Uranium distribution on impregnated activated carbons is compared with equivalent bulk liquid extraction and a mechanism of uranium sorption is discussed.

Abbasi, W.A. [Pakistan Atomic Energy Commission, Islamabad (Pakistan). Pakistan Inst. of Nuclear Science and Technology; Streat, M. [Loughborough Univ. (United Kingdom). Dept. of Chemical Engineering

1998-08-01T23:59:59.000Z

12

Metallocene/carbon hybrids prepared by a solution process for supercapacitor applications  

E-Print Network [OSTI]

Efficient and scalable solution-based processes are not generally available to integrate well-studied pseudocapacitive materials (i.e., metal oxides and conducting polymers) with other components such as porous carbon, ...

Mao, Xianwen

13

The effect of phosphoric acid on the absorption of carbon dioxide into solutions of methyldiethanolamine  

E-Print Network [OSTI]

THE EFFECT OF PHOSPHORIC ACID ON THE ABSORPTION OF CARBON DIOXIDE INTO SOLUTIONS OF METHYLDIETHANOLAMINE A Thesis by ERIC MARSHALL CORDI Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment... of the requirements for the degree of MASTER OF SCIENCE May 1991 Major Subject: Chemical Engineering THE EFFECT OF PHOSPHORIC ACID ON THE ABSORPTION OF CARBON DIOXIDE INTO SOLUTIONS OF METHYLDIETHANOLAMINE A Thesis by ERIC MARSHALL CORDI Approved as to style...

Cordi, Eric Marshall

1991-01-01T23:59:59.000Z

14

ada compiler system: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

in Gypsy Boyer, Robert Stephen 2 Modularization of the DADAISM Ada Database System Architecture Computer Technologies and Information Sciences Websites Summary: Page 1...

15

ADA ES Inc | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of InspectorConcentrating SolarElectric Coop,SaveWhiskey FlatshydroMultiple GeothermalHawaiiFlowchart JumpADA ES

16

Alkaline solution absorption of carbon dioxide method and apparatus  

DOE Patents [OSTI]

Disclosed is a method for measuring the concentration of hydroxides (or pH) in alkaline solutions, using the tendency of hydroxides to adsorb CO{sub 2}. The method comprises passing CO{sub 2} over the surface of an alkaline solution in a remote tank before and after measurements of the CO{sub 2} concentration. Comparison of the measurements yields the adsorption fraction from which the hydroxide concentration can be calculated using a correlation of hydroxide or pH to adsorption fraction. A schematic is given of a process system according to a preferred embodiment of the invention. 2 figs.

Hobbs, D.T.

1991-01-01T23:59:59.000Z

17

Electrochemical formation of hydroxide for enhancing carbon dioxide and acid gas uptake by a solution  

DOE Patents [OSTI]

A system is described for forming metal hydroxide from a metal carbonate utilizing a water electrolysis cell having an acid-producing anode and a hydroxyl-producing cathode immersed in a water solution of sufficient ionic content to allow an electric current to pass between the hydroxyl-producing cathode and the acid-producing anode. A metal carbonate, in particular water-insoluble calcium carbonate or magnesium carbonate, is placed in close proximity to the acid-producing anode. A direct current electrical voltage is provided across the acid-producing anode and the hydroxyl-producing cathode sufficient to generate acid at the acid-producing anode and hydroxyl ions at the hydroxyl-producing cathode. The acid dissolves at least part of the metal carbonate into metal and carbonate ions allowing the metal ions to travel toward the hydroxyl-producing cathode and to combine with the hydroxyl ions to form the metal hydroxide. The carbonate ions travel toward the acid-producing anode and form carbonic acid and/or water and carbon dioxide. Among other uses, the metal hydroxide formed can be employed to absorb acid gases such as carbon dioxide from a gas mixture. The invention can also generate hydrogen and oxidative gases such as oxygen or chlorine.

Rau, Gregory Hudson (Castro Valley, CA)

2012-05-15T23:59:59.000Z

18

Optoelectronic ally automated system for carbon nanotubes synthesis via arc-discharge in solution  

SciTech Connect (OSTI)

The method of arc discharge in the solution is unique and inexpensive route for synthesis of the carbon nanotubes (CNTs), carbon onions, and other carbon nanostructures. Such a method can be used for in situ synthesis of CNTs decorated with nanoparticles. Herein, we report a simple and inexpensive optoelectronically automated system for arc discharge in solution synthesis of CNTs. The optoelectronic system maintains a constant gap between the two electrodes allowing a continuous synthesis of the carbon nanostructures. The system operates in a feedback loop consisting of an electrode-gap detector and an analog electronic unit, as controller. This computerized feeding system of the anode was used for in situ nanoparticles incorporated CNTs. For example, we have successfully decorated CNTs with ceria, silica, and palladium nanoparticles. Characterizations of nanostructures are performed using high-resolution transmission electron microscopy, scanning transmission electron microscopy, energy dispersive spectroscopy, and scanning electron microscopy.

Bera, Debasis; Brinley, Erik; Kuiry, Suresh C.; McCutchen, Matthew; Seal, Sudipta; Heinrich, Helge; Kabes, Bradley [Surface Engineering and Nanotechnology Facility - SNF, Advanced Materials Processing and Analysis Center - AMPAC, and Mechanical, Materials and Aerospace Engineering - MMAE, University of Central Florida - UCF, 4000 Central Florida Blvd., Eng 1, no. 381, Orlando, Florida 32816 (United States); Advanced Materials Processing and Analysis Center - AMPAC and Department of Physics, University of Central Florida, 4000 Central Florida Blvd., Eng 1, no. 381, Orlando, Florida 32816 (United States); NSF REU Site (UCF), Department of Chemical Engineering, University of Minnesota, Duluth, Minnesota 55803 (United States)

2005-03-01T23:59:59.000Z

19

Methods of pretreating comminuted cellulosic material with carbonate-containing solutions  

DOE Patents [OSTI]

Methods of pretreating comminuted cellulosic material with an acidic solution and then a carbonate-containing solution to produce a pretreated cellulosic material are provided. The pretreated material may then be further treated in a pulping process, for example, a soda-anthraquinone pulping process, to produce a cellulose pulp. The pretreatment solutions may be extracted from the pretreated cellulose material and selectively re-used, for example, with acid or alkali addition, for the pretreatment solutions. The resulting cellulose pulp is characterized by having reduced lignin content and increased yield compared to prior art treatment processes.

Francis, Raymond

2012-11-06T23:59:59.000Z

20

Electricity solutions for a carbon-constrained future  

SciTech Connect (OSTI)

A successful response to the threat of climate change will require substantial technical work as well as practical problem solving in the political, regulatory and public areas. EPRI's 2007 Summer Seminar brought together regulatory, industry, academic, and policy leaders to discuss critical issues and delineate the initiating actions required to begin resolving the climate dilemma. Although the global nature of climate change amplifies its complexity and uncertainly, technology must play a leading role in winnowing opportunity from challenge and crafting a viable solution. 6 figs.

Schimmoller, B. [EPRI (United States)

2007-09-30T23:59:59.000Z

Note: This page contains sample records for the topic "ada carbon solutions" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Electrochemical and AFM study of cobalt nucleation mechanisms on glassy carbon from ammonium sulfate solutions  

E-Print Network [OSTI]

, for example, GMR heads and spin valve devices [3­6] (and references therein). Cobalt electrodeposition studies studies have been performed with glassy carbon electrodes [4,7­11], others being gold [10,12], nickel [13 concentration [10], for example. It is surprising that the electrodeposition of cobalt from ammoniacal solutions

Pesic, Batric

22

Electrochemical formation of hydroxide for enhancing carbon dioxide and acid gas uptake by a solution  

DOE Patents [OSTI]

A system for forming metal hydroxide from a metal carbonate utilizes a water electrolysis cell having an acid-producing anode and a hydroxyl-producing cathode immersed in a water solution of sufficient ionic content to allow an electric current to pass between the hydroxyl-producing cathode and the acid-producing anode. A metal carbonate is placed in close proximity to the acid-producing anode. A direct current electrical voltage is provided across the acid-producing anode and the hydroxyl-producing cathode sufficient to generate acid at the acid-producing anode and hydroxyl ions at the hydroxyl-producing cathode. The acid dissolves at least part of the metal carbonate into metal and carbonate ions allowing the metal ions to travel toward the hydroxyl-producing cathode and to combine with the hydroxyl ions to form the metal hydroxide. The carbonate ions travel toward the acid-producing anode and form carbonic acid and/or water and carbon dioxide.

Rau, Gregory Hudson

2014-07-01T23:59:59.000Z

23

adenosin deaminasa ada: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

James A Zwiebel; Eli Gilboa; R Michael Blaese; Arthur Nienhuis; Richard J O& apos; reilly; W. French Anderson 1987-01-01 12 ADA: A Language for Robot Programming? Computer...

24

Nanofiltration of Electrolyte Solutions by Sub-2nm Carbon Nanotube Membranes  

SciTech Connect (OSTI)

Both MD simulations and experimental studies have shown that liquid and gas flow through carbon nanotubes with nanometer size diameter is exceptionally fast. For applications in separation technology, selectivity is required together with fast flow. In this work, we use pressure-driven filtration experiments to study ion exclusion in silicon nitride/sub-2-nm CNT composite membranes as a function of solution ionic strength, pH, and ion valence. We show that carbon nanotube membranes exhibit significant ion exclusion at low salt concentration. Our results support a rejection mechanism dominated by electrostatic interactions between fixed membrane charges and mobile ions, while steric and hydrodynamic effects appear to be less important. Comparison with commercial nanofiltration membranes for water softening reveals that our carbon nanotube membranes provides far superior water fluxes for similar ion rejection capabilities.

Fornasiero, F; Park, H G; Holt, J K; Stadermann, M; Kim, S; In, J B; Grigoropoulos, C P; Noy, A; Bakajin, O

2008-03-13T23:59:59.000Z

25

The effects of water on the passive behavior of 1018 carbon steel in organic solutions  

SciTech Connect (OSTI)

The passivation and breakdown behavior of 1018 carbon steel in propylene carbonate (PC) or dimethoxyethane (DME) mixtures with water and containing 0.5M LiAsF[sub 6] were studied. The behavior of the steel in the organic solvent/water mixtures was highly dependent on the organic solvent. The anodic polarization of carbon steel displayed active-passive behavior in 10--90 mole percent (m/o) PC/H[sub 2]O mixtures and a tenuous degree of stability within the passive range. The anodic polarization of carbon steel displayed no active-passive behavior in 50--90 m/o DME/H[sub 2]O mixtures and displayed active-passive behavior in 10--30 m/o DME/H[sub 2]O mixtures. The steel was stable within the passive range of these DME/H[sub 2]O solutions. The breakdown potential of the steel in DME/H[sub 2]O mixtures is more electropositive than the oxidation potential of the DME solvent at all molar ratios.

Shifler, D.A.; Kruger, J. (John Hopkins Univ., Baltimore, MD (United States). Dept. of Materials Science and Engineering); Moran, P.J. (Naval Academy, Annapolis, MD (United States). Dept. of Mechanical Engineering)

1994-04-01T23:59:59.000Z

26

Kinetics of extraction of alkylpyrocatecholates of europium and transplutonium elements from carbonate solutions  

SciTech Connect (OSTI)

The kinetics of extraction of alkylpyrocatecholates of europium, americium, curium, and californium from solutions containing 0.01-1.5 M potassium carbonate at pH = 10.5-13.2 has been studied. It has been shown that extraction slows down with increase of concentration of the complexing agent and accelerates with rise of pH. The chemical stage limiting the extraction rate seems to proceed on the aqueous phase slide. The conditions of americium(III) and curium(III) separation by extraction chromatography have been determined making use of the kinetic data.

Novikov, A.P.; Bukina, T.I.; Karalova, Z.K.; Myasoedov, B.F.

1987-11-01T23:59:59.000Z

27

Corrosion of carbon steels, stainless steels, and titanium in aqueous lithium bromide solution  

SciTech Connect (OSTI)

Effects of lithium bromide (LiBr) concentration, pH, temperature, exposure time, and the action of some inhibitors on corrosion of several carbon (C) steels, stainless steels (SS), and a titanium (Ti) alloy were studied. Corrosion rates were determined by the polarization resistance method and compared to rates determined by weight-loss measurements. Pitting potentials (E[sub p]) were evaluated in neutral LiBr solution and with different inhibitors. Pit density and average pit depth depended on the metal tested, with lowest values for Ti, the next lowest values for type 316 SS (UNS S31600), and the highest values for UNS G41350 tempered steel.

Guinon, J.L.; Garcia-Anton, J.; Perez-Herranz, V. (Univ. Politecnica de Valencia (Spain). Dept. de Ingenieria Quimica y Nuclear); Lacoste, G. (ENSIGC, Toulouse (France))

1994-03-01T23:59:59.000Z

28

A Hydro-mechanical Model and Analytical Solutions for Geomechanical Modeling of Carbon Dioxide Geological Sequestration  

SciTech Connect (OSTI)

We present a hydro-mechanical model for geological sequestration of carbon dioxide. The model considers the poroelastic effects by taking into account the coupling between the geomechanical response and the fluid flow in greater detail. The simplified hydro-mechanical model includes the geomechanical part that relies on the linear elasticity, while the fluid flow is based on the Darcy’s law. Two parts were coupled using the standard linear poroelasticity. Analytical solutions for pressure field were obtained for a typical geological sequestration scenario. The model predicts the temporal and spatial variation of pressure field and effects of permeability and elastic modulus of formation on the fluid pressure distribution.

Xu, Zhijie; Fang, Yilin; Scheibe, Timothy D.; Bonneville, Alain

2012-05-15T23:59:59.000Z

29

Ohio State ADA Coordinator to Provide Assistance in Indonesia  

E-Print Network [OSTI]

Ohio State ADA Coordinator to Provide Assistance in Indonesia L. Scott Lissner, The Ohio State in Indonesia on disability policy and practice. The trip, from September 15 ­ October 2, 2013, is sponsored, and university professors and students, the U.S. Embassy, along with Helen Keller International Indonesia [a U

Howat, Ian M.

30

ADA Requirements for Workplace Charging Installation | Department of Energy  

Energy Savers [EERE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustionImprovement3 Beryllium-Associated Worker2014DepartmentI325 8ADA Requirements for Workplace

31

City of Ada, Minnesota (Utility Company) | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of Inspector GeneralDepartmentAUDIT REPORTOpenWendeGuoCatalystPathways CalculatorinAcworth, Georgia (UtilityAda

32

Multi-Phase CFD Modeling of Solid Sorbent Carbon Capture System  

SciTech Connect (OSTI)

Computational fluid dynamics (CFD) simulations are used to investigate a low temperature post-combustion carbon capture reactor. The CFD models are based on a small scale solid sorbent carbon capture reactor design from ADA-ES and Southern Company. The reactor is a fluidized bed design based on a silica-supported amine sorbent. CFD models using both Eulerian-Eulerian and Eulerian-Lagrangian multi-phase modeling methods are developed to investigate the hydrodynamics and adsorption of carbon dioxide in the reactor. Models developed in both FLUENT® and BARRACUDA are presented to explore the strengths and weaknesses of state of the art CFD codes for modeling multi-phase carbon capture reactors. The results of the simulations show that the FLUENT® Eulerian-Lagrangian simulations (DDPM) are unstable for the given reactor design; while the BARRACUDA Eulerian-Lagrangian model is able to simulate the system given appropriate simplifying assumptions. FLUENT® Eulerian-Eulerian simulations also provide a stable solution for the carbon capture reactor given the appropriate simplifying assumptions.

Ryan, Emily M.; DeCroix, David; Breault, Ronald W.; Xu, Wei; Huckaby, E. D.; Saha, Kringan; Darteville, Sebastien; Sun, Xin

2013-07-30T23:59:59.000Z

33

Multi-phase CFD modeling of solid sorbent carbon capture system  

SciTech Connect (OSTI)

Computational fluid dynamics (CFD) simulations are used to investigate a low temperature post-combustion carbon capture reactor. The CFD models are based on a small scale solid sorbent carbon capture reactor design from ADA-ES and Southern Company. The reactor is a fluidized bed design based on a silica-supported amine sorbent. CFD models using both Eulerian–Eulerian and Eulerian–Lagrangian multi-phase modeling methods are developed to investigate the hydrodynamics and adsorption of carbon dioxide in the reactor. Models developed in both FLUENT® and BARRACUDA are presented to explore the strengths and weaknesses of state of the art CFD codes for modeling multi-phase carbon capture reactors. The results of the simulations show that the FLUENT® Eulerian–Lagrangian simulations (DDPM) are unstable for the given reactor design; while the BARRACUDA Eulerian–Lagrangian model is able to simulate the system given appropriate simplifying assumptions. FLUENT® Eulerian–Eulerian simulations also provide a stable solution for the carbon capture reactor given the appropriate simplifying assumptions.

Ryan, E. M.; DeCroix, D.; Breault, Ronald W. [U.S. DOE; Xu, W.; Huckaby, E. David [U.S. DOE

2013-01-01T23:59:59.000Z

34

Study of benzotriazole as corrosion inhibitors of carbon steel in chloride solution containing hydrogen sulfide using electrochemical impedance spectroscopy (EIS)  

SciTech Connect (OSTI)

Corrosion and inhibition studies on API 5LX65 carbon steel in chloride solution containing various concentrations of benzotriazole has been conducted at temperature of 70°C using Electrochemical Impedance Spectroscopy (EIS). Corroded carbon steel surface with and without inhibitor have been observed using X-ray Diffraction (XRD), Scanning Electron Microscope (SEM), and Energy Dispersive Spectroscopy (EDS). The objectives of this research are to study the performance of benzotriazole as corrosion inhibitors. The experimental results of carbon steel corrosion in 3.5% NaCl solution containing 500 mg/l H{sub 2}S at different BTAH concentrations showed that corrosion rate of carbon steel decreases with increasing of BTAH concentrations from 0 to 10 mmol/l. The inhibition efficiency of BTAH was found to be affected by its concentration. The optimum efficiency obtained of BTAH is 93% at concentration of 5 mmol/l. The result of XRD and EDS analysis reveal the iron sulfide (FeS) formation on corroded carbon steel surface without inhibitor. The EDS spectrum show the Nitrogen (N) bond on carbon steel surface inhibited by BTAH.

Solehudin, Agus, E-mail: asolehudin@upi.edu [Department of Mechanical Engineering Education, Indonesia University of Education (UPI), Bandung, West Java (Indonesia); Nurdin, Isdiriayani [Department of Chemical Engineering, Bandung Institute of Technology, Bandung, West Java (Indonesia)

2014-03-24T23:59:59.000Z

35

Numerical modeling of carbon dioxide sequestration on the rate of pressure solution creep in limestone: Preliminary results  

E-Print Network [OSTI]

When carbon dioxide (CO2) is injected into an aquifer or a depleted geological reservoir, its dissolution into solution results in acidification of the pore waters. As a consequence, the pore waters become more reactive, which leads to enhanced dissolution-precipitation processes and a modification of the mechanical and hydrological properties of the rock. This effect is especially important for limestones given that the solubility and reactivity of carbonates is strongly dependent on pH and the partial pressure of CO2. The main mechanism that couples dissolution, precipitation and rock matrix deformation is commonly referred to as intergranular pressure solution creep (IPS) or pervasive pressure solution creep (PSC). This process involves dissolution at intergranular grain contacts subject to elevated stress, diffusion of dissolved material in an intergranular fluid, and precipitation in pore spaces subject to lower stress. This leads to an overall and pervasive reduction in porosity due to both grain indent...

Renard, Francois; Hellmann, Roland; Collombet, Marielle; Guen, Yvi Le

2008-01-01T23:59:59.000Z

36

E-Print Network 3.0 - act ada accessibility Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

of Brest, France... LISyCEA 3883 singhoff@univ-brest.fr Ada-Europe'08 tutorial, Venice - Page 179 ... Source: Brest, Universit de - Dpartement Informatique,...

37

Carbon capture and storage in the U.S. : a sinking climate solution  

E-Print Network [OSTI]

Coal-fired power plants produce half of the United States' electricity and are also the country's largest emitter of carbon dioxide, the greenhouse gas responsible for climate change. Carbon Capture and Storage (CCS) is a ...

Henschel, Rachel Hockfield

2009-01-01T23:59:59.000Z

38

Influence of the electrode material on carbon monoxide adsorption and electroreduction in aqueous solutions  

SciTech Connect (OSTI)

Carbon monoxide electroreduction was studied at rotating disk electrodes made of different materials (Cu, Au, Zn, Cd; amalgamated Cu; Al, Ga, In, glassy carbon, Sn, Pb, Mo, Fe, Ni, and certain binary systems). Positive partial currents which are evidence for a direct electroreduction of CO have been observed only at Zn, Ga, and Cd. The observation that CO is less susceptible to electroreduction than carbon dioxide is explained by the stronger chemisorption of carbon monoxide on the electrodes.

Osetrova, N.V.; Vasil'ev, Yu.B.

1987-12-01T23:59:59.000Z

39

Ada County, Idaho: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of InspectorConcentrating SolarElectric Coop,SaveWhiskeyEnergyAd-Venta Jump to: navigation, search Logo:Ada

40

A restudy of the cylindrical amphoras from the seventh-century Yassi Ada shipwreck  

E-Print Network [OSTI]

, this re-examination of the cylindrical amphoras from the Yassi Ada shipwreck provides evidence for a somewhat similar metrological system in use by the 7th c. This restudy of the Yassi Ada cargo also offers a new interpretation of the shipwreck...

Van Alfen, Peter Gerritt

1995-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "ada carbon solutions" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Carbon nanotubes and graphene in aqueous surfactant solutions : molecular simulations and theoretical modeling  

E-Print Network [OSTI]

This thesis describes combined molecular simulations and theoretical modeling studies, supported by experimental observations, on properties and applications of carbon nanotubes (CNTs) and graphene sheets dispersed in ...

Lin, Shangchao

2012-01-01T23:59:59.000Z

42

Tel: +44 (0) 1603 591574 Email: business@uea.ac.uk Web: www.uea.ac.uk/business New low carbon solutions for home heating  

E-Print Network [OSTI]

New low carbon solutions for home heating In the UK alone, over one million domestic oil-fired central suitable for home heating in the UK, which is responsible for more than a quarter of British carbon emissions. The oil heating industry considers the development of a renewable home heating fuel a key

Everest, Graham R

43

The performance of a surface-applied corrosion inhibitor for the carbon steel in saturated Ca(OH){sub 2} solutions  

SciTech Connect (OSTI)

In the present work, the performance of an amino alcohol based surface applied inhibitor was studied by the electrochemical techniques in saturated Ca(OH){sub 2} solutions. The surface morphology of the carbon steel was observed by scanning electron microscope, and the energy diffraction spectrum was also tested. Results showed that the inhibitor used in this work demonstrated obvious inhibition efficiency on the carbon steel in saturated Ca(OH){sub 2} solutions. The inhibition mechanism of the inhibitor lies in the quick adsorption of the active component on carbon steel surface.

Zheng, Haibing [Qingdao Technological University, Qingdao 266033 (China)] [Qingdao Technological University, Qingdao 266033 (China); Li, Weihua, E-mail: liweihua@qdio.ac.cn [Qingdao Technological University, Qingdao 266033 (China) [Qingdao Technological University, Qingdao 266033 (China); Institute of Oceanology, Chinese Academy of Sciences, Qingdao 266071 (China); Ma, Fubin [Institute of Oceanology, Chinese Academy of Sciences, Qingdao 266071 (China)] [Institute of Oceanology, Chinese Academy of Sciences, Qingdao 266071 (China); Kong, Qinglin [University of Melbourne, Melbourne 3010 (Australia)] [University of Melbourne, Melbourne 3010 (Australia)

2014-01-15T23:59:59.000Z

44

The adsorption of gold, palladium and platinum from acidic chloride solutions on mesoporous carbons.  

SciTech Connect (OSTI)

Studies on the adsorption characteristics of gold, palladium and platinum on mesoporous carbon (CMK-3) and sulfur-impregnated mesoporous carbon (CMK-3/S) evaluated the benefits/drawbacks of the presence of a layer of elemental sulfur inside mesoporous carbon structures. Adsorption isotherms collected for Au(III), Pd(II) and Pt(IV) on those materials suggest that sulfur does enhance the adsorption of those metal ions in mildly acidic environment (pH 3). The isotherms collected in 1 M HCl show that the benefit of sulfur disappears due to the competing influence of large concentration of hydrogen ions on the ion-exchanging mechanism of metal ions sorption on mesoporous carbon surfaces. The collected acid dependencies illustrate similar adsorption characteristics for CMK-3 and CMK-3/S in 1-5 M HCl concentration range. Sorption of metal ions from diluted aqueous acidic mixtures of actual leached electronic waste demonstrated the feasibility of recovery of gold from such liquors.

Peter Zalupski; Rocklan McDowell; Guy Dutech

2014-10-01T23:59:59.000Z

45

Carbon Tax Revenue and the Budget Deficit: A Win-Win-Win Solution?  

E-Print Network [OSTI]

Bush-era tax cuts are scheduled to expire at the end of 2012, leading to interest in raising revenue through a carbon tax. This revenue could be used to either cut other taxes or to avoid cuts in Federal programs. There ...

Rausch, Sebastian

46

Extraction of Uranium from Aqueous Solutions Using Ionic Liquid and Supercritical Carbon Dioxide in Conjunction  

SciTech Connect (OSTI)

Uranyl ions (UO2)2+ in aqueous nitric acid solutions can be extracted into supercritical CO2 (sc-CO2) via an imidazolium-based ionic liquid using tri-n-butylphosphate (TBP) as a complexing agent. The transfer of uranium from the ionic liquid to the supercritical fluid phase was monitored by UV/Vis spectroscopy using a high-pressure fiberoptic cell. The form of the uranyl complex extracted into the supercritical CO2 phase was found to be UO2(NO3)2(TBP)2. The extraction results were confirmed by UV/Vis spectroscopy and by neutron activation analysis. This technique could potentially be used to extract other actinides for applications in the field of nuclear waste management.

Wang, Joanna S.; Sheaff, Chrystal N.; Yoon, Byunghoon; Addleman, Raymond S.; Wai, Chien M.

2009-01-01T23:59:59.000Z

47

ADA/EEO Talking Notes Slide 1-Welcome to the New Employee Orientation session presented by the Office of Equal  

E-Print Network [OSTI]

ADA/EEO Talking Notes Slide 1-Welcome to the New Employee Orientation session presented by the Office of Equal Opportunity & Compliance or EOC. Slide2-This overview will cover EEO, ADA, Retaliation in the workplace. Please direct any of your questions regarding today's overview directly to EOC. Slide 3-The

Weston, Ken

48

How to Run Turing Machines on Encrypted Data Shafi Goldwasser Yael Kalai Raluca Ada Popa  

E-Print Network [OSTI]

How to Run Turing Machines on Encrypted Data Shafi Goldwasser Yael Kalai Raluca Ada Popa Vinod encryption, and garbling schemes work by modeling algorithms as circuits rather than as Turing machines cryptographic schemes for computing Turing machines on encrypted data that avoid the worst-case problem

Sabatini, David M.

49

CryptDB: A Practical Encrypted Relational DBMS Raluca Ada Popa, Nickolai Zeldovich, and Hari Balakrishnan  

E-Print Network [OSTI]

CryptDB: A Practical Encrypted Relational DBMS Raluca Ada Popa, Nickolai Zeldovich, and Hari Balakrishnan {raluca, nickolai, hari}@csail.mit.edu ABSTRACT CryptDB is a DBMS that provides provable. When individual users or enterprises store their sensitive data in a DBMS today, they must trust

Sabatini, David M.

50

Optimisation of a high speed rotating composite drive shaft using a genetic algorithm - Hybrid high modulus-high resistance carbon solutions  

E-Print Network [OSTI]

This study deals with the optimisation of subcritical and supercritical laminated composite drive shafts, based on a genetic algorithm. The first part focuses on the modelling of a composite drive shaft. Flexural vibrations in a simply supported composite drive shaft mounted on viscoelastic supports, including shear effects are studied. In particular, an analytic stability criterion is developed to ensure the integrity of the system. The torsional strength is then computed with the maximum stress criterion, assuming the coupling effects to be null. Torsional buckling of thin walled composite tubes is modelled using a combination between laminate theory and Fl\\"ugge theory. In the second part, the genetic algorithm is developed. The last part presents a comparative study between various composite materials solutions on a helicopter tail rotor driveline. In particular, hybrid tubes consisting of high modulus and high resistance carbon/epoxy plies are studied. These solutions make it possible to replace the conv...

Montagnier, Olivier

2011-01-01T23:59:59.000Z

51

Analytical solutions to the free vibration of a double-walled carbon nanotube carrying a bacterium at its tip  

SciTech Connect (OSTI)

We calculate the natural frequencies and mode shapes of a cantilevered double-walled carbon nanotube carrying a rigid body—representative of a bacterium or virus—at the tip of the outer nanotube. By idealizing the nanotubes as Bernoulli-Euler beams, we are able to obtain exact expressions for both the mode shapes and characteristic frequency equation. Separate analyses are performed for the special case of a concentrated tip mass and the more complicated situation where the tip body also exhibits inertia and mass center offset from the beam tip.

Storch, Joel A. [Department of Mechanical Engineering, California State University, Northridge, CA 91330-8348 (United States); Elishakoff, Isaac [Department of Ocean and Mechanical Engineering, Florida Atlantic University, Boca Raton, FL 33431-0991 (United States)

2013-11-07T23:59:59.000Z

52

The over 20 year operating experience with carbon steel tubings at Abu Attifel Field. Problems and solutions  

SciTech Connect (OSTI)

Abu Attifel onshore oil field (Libya) was discovered in 1968 and put in production in November 1972. The total average production is nowadays about 140,000 BOPD (22,260 m{sup 3}/d) with 46 producing wells. All the production wells were originally completed with carbon steel tubing, although the produced fluids contain CO{sub 2}-4% in the gas phase. After several years of production with minor downhole corrosion problems, several corrosion failures started to occur in the nineties at extremely high corrosion rate. In some cases corrosion attacks occurred although the water cut was negligible (lower than 1%). A detailed corrosion study was initiated to investigate the problem in order to identify the most critical production wells and the priority of intervention for well; this paper reports the corrosion assessment results and the actions undertaken to control the corrosion. A occurred corrosion events is also reported.

Cheldi, T. [ENI-AGIP Div., Milan (Italy); Rumash, K. [AGIP Oil, Tripoli (Libyan Arab Jamahiriya); Bazzoni, B. [Cescor srl, Milan (Italy)

1999-11-01T23:59:59.000Z

53

Electrodeposition From Acidic Solutions of Nickel Bis(benzenedithiolate) Produces a Hydrogen-Evolving Ni-S Film on Glassy Carbon  

SciTech Connect (OSTI)

Films electrodeposited onto glassy carbon electrodes from acidic acetonitrile solutions of [Bu4N][Ni(bdt)2] (bdt = 1,2-benzenedithiolate) are active toward electrocatalytic hydrogen production at potentials 0.2-0.4 V positive of untreated electrodes. This activity is preserved on rinsing the electrode and transfer to fresh acid solution. X-ray photoelectron spectra indicate that the deposited material contains Ni and S. Correlations between voltammetric and spectroscopic results indicate that the deposited material is active, i.e. that catalysis is heterogeneous rather than homogeneous. Control experiments establish that obtaining the observed catalytic response requires both Ni and the 1,2 benzenedithiolate ligand to be present during deposition. This research was supported as part of the Center for Molecular Electrocatalysis, an Energy Frontier Research Center funded by the US Department of Energy, Office of Science, Office of Basic Energy Sciences. Pacific Northwest National Laboratory is operated by Battelle for the US Department of Energy. A portion of the research was performed using EMSL, a 17 national scientific user facility sponsored by the Department of Energy's Office of Biological and Environmental Research and located at Pacific Northwest National Laboratory.

Fang, Ming; Engelhard, Mark H.; Zhu, Zihua; Helm, Monte L.; Roberts, John A.

2014-01-03T23:59:59.000Z

54

Method for synthesizing carbon nanotubes  

DOE Patents [OSTI]

A method for preparing a precursor solution for synthesis of carbon nanomaterials, where a polar solvent is added to at least one block copolymer and at least one carbohydrate compound, and the precursor solution is processed using a self-assembly process and subsequent heating to form nanoporous carbon films, porous carbon nanotubes, and porous carbon nanoparticles.

Fan, Hongyou

2012-09-04T23:59:59.000Z

55

Carbon Capture (Carbon Cycle 2.0)  

ScienceCinema (OSTI)

Berend Smit speaks at the Carbon Cycle 2.0 kick-off symposium Feb. 3, 2010. We emit more carbon into the atmosphere than natural processes are able to remove - an imbalance with negative consequences. Carbon Cycle 2.0 is a Berkeley Lab initiative to provide the science needed to restore this balance by integrating the Labs diverse research activities and delivering creative solutions toward a carbon-neutral energy future. http://carboncycle2.lbl.gov/

Smit, Berend

2011-06-08T23:59:59.000Z

56

CARBON-CARBON COMPOSITE ALLCOMP Carbon-Carbon Composite  

E-Print Network [OSTI]

materials. MATERIALS AND DESIRED DATA Carbon-Carbon Composites(T300 & SWB): Crush Resistance, Bend StrengthCARBON-CARBON COMPOSITE ALLCOMP Carbon-Carbon Composite · C-C supplied in two forms · T300: C strength 4340 steel, carbon-carbon composite, and Carbon-Silicon Carbide composite were tested to examine

Rollins, Andrew M.

57

ATK - Supersonic Carbon Capture  

ScienceCinema (OSTI)

ATK and ACEnt Laboratories, with the help of ARPA-E funding, have taken an aerospace problem, supersonic condensation, and turned it into a viable clean energy solution for carbon capture.

Castrogiovanni, Anthony (ACEnT Laboratories, President and CEO); Calayag, Bon (ATK, Program Manager)

2014-04-11T23:59:59.000Z

58

ATK - Supersonic Carbon Capture  

SciTech Connect (OSTI)

ATK and ACEnt Laboratories, with the help of ARPA-E funding, have taken an aerospace problem, supersonic condensation, and turned it into a viable clean energy solution for carbon capture.

Castrogiovanni, Anthony (ACEnT Laboratories, President and CEO) [ACEnT Laboratories, President and CEO; Calayag, Bon (ATK, Program Manager) [ATK, Program Manager

2014-03-05T23:59:59.000Z

59

Electrodeposition From Acidic Solutions of Nickel Bis(benzenedithiolat...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

From Acidic Solutions of Nickel Bis(benzenedithiolate) Produces a Hydrogen-Evolving Ni-S Film on Glassy Carbon Electrodeposition From Acidic Solutions of Nickel...

60

Orientational relaxation and vibrational excitation transfer in methanolcarbon tetrachloride solutions  

E-Print Network [OSTI]

Orientational relaxation and vibrational excitation transfer in methanol­carbon tetrachloride spectroscopy of the hydroxyl stretch of methanol in carbon tetrachloride solutions to study orientational excitation transfer. For concentrated methanol in carbon tetrachloride solu- tions, like those used

Fayer, Michael D.

Note: This page contains sample records for the topic "ada carbon solutions" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Chemically modified carbonic anhydrases useful in carbon capture systems  

DOE Patents [OSTI]

The present disclosure relates to chemically modified carbonic anhydrase polypeptides and soluble compositions, homogenous liquid formulations comprising them. The chemically modified carbonic anhydrase polypeptides have improved properties relative to the same carbonic anhydrase polypeptide that is not chemically modified including the improved properties of increased activity and/or stability in the presence of amine compounds, ammonia, or carbonate ion. The present disclosure also provides methods of preparing the chemically modified polypeptides and methods of using the chemically modified polypeptides for accelerating the absorption of carbon dioxide from a gas stream into a solution as well as for the release of the absorbed carbon dioxide for further treatment and/or sequestering.

Novick, Scott J; Alvizo, Oscar

2013-10-29T23:59:59.000Z

62

Chemically modified carbonic anhydrases useful in carbon capture systems  

DOE Patents [OSTI]

The present disclosure relates to chemically modified carbonic anhydrase polypeptides and soluble compositions, homogenous liquid formulations comprising them. The chemically modified carbonic anhydrase polypeptides have improved properties relative to the same carbonic anhydrase polypeptide that is not chemically modified including the improved properties of increased activity and/or stability in the presence of amine compounds, ammonia, or carbonate ion. The present disclosure also provides methods of preparing the chemically modified polypeptides and methods of using the chemically modified polypeptides for accelerating the absorption of carbon dioxide from a gas stream into a solution as well as for the release of the absorbed carbon dioxide for further treatment and/or sequestering.

Novick, Scott; Alvizo, Oscar

2013-01-15T23:59:59.000Z

63

Testing and characterization of carbon nanotubes as strain sensors  

E-Print Network [OSTI]

The potential of using carbon nanotube coated flexible cloth as strain gauges was studied. Samples were prepared by sonicating strips of cloth inside a 1mg/ml carbon nanotube in propylene carbonate solution. A dynamic ...

Diaz, Juan D

2011-01-01T23:59:59.000Z

64

Sustainable Energy Solutions Task 4.1 Intelligent Manufacturing of Hybrid Carbon-Glass Fiber-Reinforced Composite Wind Turbine Blades  

SciTech Connect (OSTI)

EXECUTIVE SUMARY In this subtask, the manufacturability of hybrid carbon-glass fiber-reinforced composite wind turbine blades using Vacuum-Assisted Resin Transfer Molding (VARTM) was investigated. The objective of this investigation was to study the VARTM process and its parameters to manufacture cost-effective wind turbine blades with no defects (mainly eliminate dry spots and reduce manufacturing time). A 2.5-dimensional model and a 3-dimensional model were developed to simulate mold filling and part curing under different conditions. These conditions included isothermal and non-isothermal filling, curing of the part during and after filling, and placement of injection gates at different locations. Results from this investigation reveal that the process can be simulated and also that manufacturing parameters can be optimized to eliminate dry spot formation and reduce the manufacturing time. Using computer-based models is a cost-effective way to simulate manufacturing of wind turbine blades. The approach taken herein allows the design of the wind blade manufacturing processes without physically running trial-and-error experiments that are expensive and time-consuming; especially for larger blades needed for more demanding environmental conditions. This will benefit the wind energy industry by reducing initial design and manufacturing costs which can later be passed down to consumers and consequently make the wind energy industry more competitive.

Janet M Twomey, PhD

2010-04-30T23:59:59.000Z

65

E-Print Network 3.0 - alkaline nabh4 solution Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Millennium Cell Inc. Summary: solution, wherein borax is treated with carbon dioxide and methanol to directly obtain trimethylborate.4... solution involves finely dividing the...

66

Carbon Capture  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Carbon Capture Pre-Combustion Post-Combustion CO2 Compression Systems Analysis Regulatory Drivers Program Plan Capture Handbook Carbon capture involves the separation of CO2 from...

67

E-Print Network 3.0 - acid carbonates Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

67 Topic T4 Claudia Hildenbrand 274 EDLC electrodes from cellulose-based carbon aerogels: influence of Summary: cellulose-acetate-based carbon aerogel powder with a solution...

68

Data:Bd967143-17e5-468b-839e-4ada02ae4134 | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page onb5-dcc1fcffd1f2 NoBcfd1c1f-01b6-4a11-8667-d236d8565086 No revision has been4ada02ae4134 No revision has been approved

69

Data:E43ada81-47c3-4830-a717-6cb806a5e67e | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Pagec-01b596aa1744b55997c1cc No revision has been approved for-1837723ccd6b No revisionE43ada81-47c3-4830-a717-6cb806a5e67e No

70

Carbon Smackdown: Carbon Capture  

SciTech Connect (OSTI)

In this July 9, 2010 Berkeley Lab summer lecture, Lab scientists Jeff Long of the Materials Sciences and Nancy Brown of the Environmental Energy Technologies Division discuss their efforts to fight climate change by capturing carbon from the flue gas of power plants, as well as directly from the air

Jeffrey Long

2010-07-12T23:59:59.000Z

71

Carbon Smackdown: Carbon Capture  

ScienceCinema (OSTI)

In this July 9, 2010 Berkeley Lab summer lecture, Lab scientists Jeff Long of the Materials Sciences and Nancy Brown of the Environmental Energy Technologies Division discuss their efforts to fight climate change by capturing carbon from the flue gas of power plants, as well as directly from the air

Jeffrey Long

2010-09-01T23:59:59.000Z

72

Geologic Carbon Sequestration and Biosequestration (Carbon Cycle 2.0)  

ScienceCinema (OSTI)

Don DePaolo, Director of LBNL's Earth Sciences Division, speaks at the Carbon Cycle 2.0 kick-off symposium Feb. 3, 2010. We emit more carbon into the atmosphere than natural processes are able to remove - an imbalance with negative consequences. Carbon Cycle 2.0 is a Berkeley Lab initiative to provide the science needed to restore this balance by integrating the Labs diverse research activities and delivering creative solutions toward a carbon-neutral energy future. http://carboncycle2.lbl.gov/

DePaolo, Don [Director, LBNL Earth Sciences Division

2011-06-08T23:59:59.000Z

73

Reducing carbon dioxide to products  

DOE Patents [OSTI]

A method reducing carbon dioxide to one or more products may include steps (A) to (C). Step (A) may bubble said carbon dioxide into a solution of an electrolyte and a catalyst in a divided electrochemical cell. The divided electrochemical cell may include an anode in a first cell compartment and a cathode in a second cell compartment. The cathode may reduce said carbon dioxide into said products. Step (B) may adjust one or more of (a) a cathode material, (b) a surface morphology of said cathode, (c) said electrolyte, (d) a manner in which said carbon dioxide is bubbled, (e), a pH level of said solution, and (f) an electrical potential of said divided electrochemical cell, to vary at least one of (i) which of said products is produced and (ii) a faradaic yield of said products. Step (C) may separate said products from said solution.

Cole, Emily Barton; Sivasankar, Narayanappa; Parajuli, Rishi; Keets, Kate A

2014-09-30T23:59:59.000Z

74

Apparatus for extracting and sequestering carbon dioxide  

DOE Patents [OSTI]

An apparatus and method associated therewith to extract and sequester carbon dioxide (CO.sub.2) from a stream or volume of gas wherein said apparatus hydrates CO.sub.2 and reacts the resulting carbonic acid with carbonate. Suitable carbonates include, but are not limited to, carbonates of alkali metals and alkaline earth metals, preferably carbonates of calcium and magnesium. Waste products are metal cations and bicarbonate in solution or dehydrated metal salts, which when disposed of in a large body of water provide an effective way of sequestering CO.sub.2 from a gaseous environment.

Rau, Gregory H. (Castro Valley, CA); Caldeira, Kenneth G. (Livermore, CA)

2010-02-02T23:59:59.000Z

75

Method for extracting and sequestering carbon dioxide  

DOE Patents [OSTI]

A method and apparatus to extract and sequester carbon dioxide (CO.sub.2) from a stream or volume of gas wherein said method and apparatus hydrates CO.sub.2, and reacts the resulting carbonic acid with carbonate. Suitable carbonates include, but are not limited to, carbonates of alkali metals and alkaline earth metals, preferably carbonates of calcium and magnesium. Waste products are metal cations and bicarbonate in solution or dehydrated metal salts, which when disposed of in a large body of water provide an effective way of sequestering CO.sub.2 from a gaseous environment.

Rau, Gregory H. (Castro Valley, CA); Caldeira, Kenneth G. (Livermore, CA)

2005-05-10T23:59:59.000Z

76

Energy and Society Week 4 Section Solution  

E-Print Network [OSTI]

. What is the main flaw of GDP per capita as the development metric? ANS: Open end question. Main flaw1 9/17/2014 Energy and Society Week 4 Section Solution TOPIC 1: Energy & Development: [iClicker]-1. Influence = B. Energy consumption = (/$) C. Carbon = 2 (/) ANS: [C] Note carbon

Kammen, Daniel M.

77

Working with Carbon Tetrachloride According to the Material Safety Data Sheet (MSDS) for Carbon tetrachloride (CCl4) special precautions  

E-Print Network [OSTI]

Working with Carbon Tetrachloride According to the Material Safety Data Sheet (MSDS) for Carbon effects are amplified OSHA PEL is 10 ppm LD50 (oral, rat) is 2800 mg/kg Carbon tetrachloride is classified #12;Working with Carbon Tetrachloride Handling and storage instructions: Preparing CCl4 solutions

Cui, Yan

78

Continuous air agglomeration method for high carbon fly ash beneficiation  

DOE Patents [OSTI]

The carbon and mineral components of fly ash are effectively separated by a continuous air agglomeration method, resulting in a substantially carboree mineral stream and a highly concentrated carbon product. The method involves mixing the fly ash comprised of carbon and inorganic mineral matter with a liquid hydrocarbon to form a slurry, contacting the slurry with an aqueous solution, dispersing the hydrocarbon slurry into small droplets within the aqueous solution by mechanical mixing and/or aeration, concentrating the inorganic mineral matter in the aqueous solution, agglomerating the carbon and hydrocarbon in the form of droplets, collecting the droplets, separating the hydrocarbon from the concentrated carbon product, and recycling the hydrocarbon.

Gray, McMahon L. (Pittsburgh, PA); Champagne, Kenneth J. (Monongahela, PA); Finseth, Dennis H. (Pittsburgh, PA)

2000-01-01T23:59:59.000Z

79

Solar Fuels and Carbon Cycle 2.0 (Carbon Cycle 2.0)  

ScienceCinema (OSTI)

Paul Alivisatos, LBNL Director speaks at the Carbon Cycle 2.0 kick-off symposium Feb. 4, 2010. We emit more carbon into the atmosphere than natural processes are able to remove - an imbalance with negative consequences. Carbon Cycle 2.0 is a Berkeley Lab initiative to provide the science needed to restore this balance by integrating the Labs diverse research activities and delivering creative solutions toward a carbon-neutral energy future. http://carboncycle2.lbl.gov/

Alivisatos, Paul

2011-06-03T23:59:59.000Z

80

Regional Workshop on Opportunities and Priorities for Low Carbon...  

Open Energy Info (EERE)

in Green Energy Supply Demand Side Energy Efficiency Solutions: A Low Hanging Fruit Managing the Technology for Low Carbon Green Growth Resources Mobilization for Low...

Note: This page contains sample records for the topic "ada carbon solutions" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Climate SolutionS CS pgs final.indd 1 12/21/07 2:25:52 PM  

E-Print Network [OSTI]

forests and conserve natural resources. Climate solutions was printed on 60-lb. legacy offset, an Fs · 21 Carbon taxes · 25 Carbon caps · 28 regulations · 34 Investments · 36 What states can do · 38 What;Part 3 | Carbon Capping 101 three varieties of cap-and-trade · 49 A seat in exxon stadium · 51 lessons

Ford, Andrew

82

Aluminum-carbon composite electrode  

DOE Patents [OSTI]

A high performance double layer capacitor having an electric double layer formed in the interface between activated carbon and an electrolyte is disclosed. The high performance double layer capacitor includes a pair of aluminum impregnated carbon composite electrodes having an evenly distributed and continuous path of aluminum impregnated within an activated carbon fiber preform saturated with a high performance electrolytic solution. The high performance double layer capacitor is capable of delivering at least 5 Wh/kg of useful energy at power ratings of at least 600 W/kg. 3 figs.

Farahmandi, C.J.; Dispennette, J.M.

1998-07-07T23:59:59.000Z

83

Aluminum-carbon composite electrode  

DOE Patents [OSTI]

A high performance double layer capacitor having an electric double layer formed in the interface between activated carbon and an electrolyte is disclosed. The high performance double layer capacitor includes a pair of aluminum impregnated carbon composite electrodes having an evenly distributed and continuous path of aluminum impregnated within an activated carbon fiber preform saturated with a high performance electrolytic solution. The high performance double layer capacitor is capable of delivering at least 5 Wh/kg of useful energy at power ratings of at least 600 W/kg.

Farahmandi, C. Joseph (Auburn, AL); Dispennette, John M. (Auburn, AL)

1998-07-07T23:59:59.000Z

84

WESTCARB Carbon Atlas  

DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

The West Coast Regional Carbon Sequestration Partnership (known as WESTCARB) was established in Fall 2003. It is one of seven research partnerships co-funded by DOE to characterize regional carbon sequestration opportunities and conduct pilot-scale validation tests. The California Energy Commission manages WESTCARB and is a major co-funder. WESTCARB is characterizing the extent and capacity of geologic formations capable of storing CO2, known as sinks. Results are entered into a geographic information system (GIS) database, along with the location of major CO2-emitting point sources in each of the six WESTCARB states, enabling researchers and the public to gauge the proximity of candidate CO2 storage sites to emission sources and the feasibility of linking them via pipelines. Specifically, the WESTCARB GIS database (also known as the carbon atlas) stores layers of geologic information about potential underground storage sites, such as porosity and nearby fault-lines and aquifers. Researchers use these data, along with interpreted geophysical data and available oil and gas well logs to estimate the region's potential geologic storage capacity. The database also depicts existing pipeline routes and rights-of-way and lands that could be off-limits, which can aid the development of a regional carbon management strategy. The WESTCARB Carbon Atlas, which is accessible to the public, provides a resource for public discourse on practical solutions for regional CO2 management. A key WESTCARB partner, the Utah Automated Geographic Reference Center, has developed data serving procedures to enable the WESTCARB Carbon Atlas to be integrated with those from other regional partnerships, thereby supporting the U.S. Department of Energy's national carbon atlas, NATCARB

85

Carbon Nanotubes.  

E-Print Network [OSTI]

?? Carbon nanotubes have extraordinary mechanical, electrical, thermal andoptical properties. They are harder than diamond yet exible, have betterelectrical conductor than copper, but can also… (more)

Fredriksson, Tore

2014-01-01T23:59:59.000Z

86

Vibration, buckling and impact of carbon nanotubes.  

E-Print Network [OSTI]

??Natural frequencies of the double and triple-walled carbon nanotubes are determined exactly and approximately for both types. Approximate solutions are found by using Bubnov-Galerkin and… (more)

Pentaras, Demetris.

2009-01-01T23:59:59.000Z

87

Total Organic Carbon Analyzer | EMSL  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Total Organic Carbon Analyzer Total Organic Carbon Analyzer The carbon analyzer is used to analyze total carbon (TC), inorganic carbon (IC), total organic carbon (TOC), purgeable...

88

Method of making carbon nanotube composite materials  

DOE Patents [OSTI]

The present invention is a method of making a composite polymeric material by dissolving a vinyl thermoplastic polymer, un-functionalized carbon nanotubes and hydroxylated carbon nanotubes and optionally additives in a solvent to make a solution and removing at least a portion of the solvent after casting onto a substrate to make thin films. The material has enhanced conductivity properties due to the blending of the un-functionalized and hydroxylated carbon nanotubes.

O'Bryan, Gregory; Skinner, Jack L; Vance, Andrew; Yang, Elaine Lai; Zifer, Thomas

2014-05-20T23:59:59.000Z

89

Investigation and Demonstration of Dry Carbon-Based Sorbent Injection for Mercury Control  

SciTech Connect (OSTI)

Public Service Company of Colorado and ADA Technologies, Inc. have performed a study of the injection of activated carbon for the removal of vapor-phase mercury from coal-fired flue gas streams. The project was completed under contract to the US Department of Energy's National Energy Technology Laboratory, with contributions from EPRI and Public Service Company. The prime contractor for the project was Public Service Company, with ADA Technologies as the major subcontractor providing technical support to all aspects of the project. The research and development effort was conducted in two phases. In Phase I a pilot facility was fabricated and tests were performed using dry carbon-based sorbent injection for mercury control on a coal-fired flue gas slipstream extracted from an operating power plant. Phase II was designed to move carbon injection technology towards commercial application on coal-fired power plants by addressing key reliability and operability concerns. Phase II field work included further development work with the Phase I pilot and mercury measurements on several of PSCo's coal-fired generating units. In addition, tests were run on collected sorbent plus fly ash to evaluate the impact of the activated carbon sorbent on the disposal of fly ash. An economic analysis was performed where pilot plant test data was used to develop a model to predict estimated costs of mercury removal from plants burning western coals. Testing in the pilot plant was undertaken to quantify the effects of plant configuration, flue gas temperature, and activated carbon injection rate on mercury removal. All three variables were found to significantly impact the mercury removal efficiency in the pilot. The trends were clear: mercury removal rates increased with decreasing flue gas temperature and with increasing carbon injection rates. Mercury removal was much more efficient with reverse-gas and pulse-jet baghouse configurations than with an ESP as the particulate control device. The native fly ash of the host unit provided significant mercury removal capacity, so that the activated carbon sorbent served as an incremental mercury removal mechanism. Tests run to characterize the waste product, a combination of fly ash and activated carbon on which mercury was present, showed that mercury and other RCRA metals of interest were all below Toxic Characteristic Leaching Procedure (TCLP) regulatory limits in the leachate. The presence of activated carbon in the fly ash was shown to have an effect on the use of fly ash as an additive in the manufacture of concrete, which could limit the salability of fly ash from a plant where activated carbon was used for mercury control.

Jim Butz; Terry Hunt

2005-11-01T23:59:59.000Z

90

Method for aqueous gold thiosulfate extraction using copper-cyanide pretreated carbon adsorption  

DOE Patents [OSTI]

A gold thiosulfate leaching process uses carbon to remove gold from the leach liquor. The activated carbon is pretreated with copper cyanide. A copper (on the carbon) to gold (in solution) ratio of at least 1.5 optimizes gold recovery from solution. To recover the gold from the carbon, conventional elution technology works but is dependent on the copper to gold ratio on the carbon.

Young, Courtney; Melashvili, Mariam; Gow, Nicholas V

2013-08-06T23:59:59.000Z

91

Composite catalysts supported on modified carbon substrates and methods of making the same  

DOE Patents [OSTI]

A method of producing a composite carbon catalyst is generally disclosed. The method includes oxidizing a carbon precursor (e.g., carbon black). Optionally, nitrogen functional groups can be added to the oxidized carbon precursor. Then, the oxidized carbon precursor is refluxed with a non-platinum transitional metal precursor in a solution. Finally, the solution is pyrolyzed at a temperature of at least about 500.degree. C.

Popov, Branko N. (Columbia, SC); Subramanian, Nalini (Kennesaw, GA); Colon-Mercado, Hector R. (Columbia, SC)

2009-11-17T23:59:59.000Z

92

Data:08c71545-a256-4e92-ada2-ef5568659916 | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of InspectorConcentratingRenewable Solutions6ae4e73fc Nof7e0a4fbc9b253bedd No7-e86f2fd7b7e6ef5568659916 No

93

Carbon Cycle 2.0: Nitash Balsara: Energy Storage  

ScienceCinema (OSTI)

Feb. 4, 2010: Humanity emits more carbon into the atmosphere than natural processes are able to remove - an imbalance with negative consequences. Carbon Cycle 2.0 is a Berkeley Lab initiative to provide the science needed to restore this balance by integrating the Labs diverse research activities and delivering creative solutions toward a carbon-neutral energy future.

Nitash Balsara

2010-09-01T23:59:59.000Z

94

Carbon Cycle 2.0: Jay Keasling: Biofuels  

ScienceCinema (OSTI)

Feb. 4, 2010: Humanity emits more carbon into the atmosphere than natural processes are able to remove - an imbalance with negative consequences. Carbon Cycle 2.0 is a Berkeley Lab initiative to provide the science needed to restore this balance by integrating the Labs diverse research activities and delivering creative solutions toward a carbon-neutral energy future.

Jay Keasling

2010-09-01T23:59:59.000Z

95

Carbon Cycle 2.0: Robert Cheng and Juan Meza  

ScienceCinema (OSTI)

Feb. 4, 2010: Humanity emits more carbon into the atmosphere than natural processes are able to remove - an imbalance with negative consequences. Carbon Cycle 2.0 is a Berkeley Lab initiative to provide the science needed to restore this balance by integrating the Labs diverse research activities and delivering creative solutions toward a carbon-neutral energy future.

Robert Cheng and Juan Meza

2010-09-01T23:59:59.000Z

96

Carbon ion pump for removal of carbon dioxide from combustion gas and other gas mixtures  

DOE Patents [OSTI]

A novel method and system of separating carbon dioxide from flue gas is introduced. Instead of relying on large temperature or pressure changes to remove carbon dioxide from a solvent used to absorb it from flue gas, the ion pump method, as disclosed herein, dramatically increases the concentration of dissolved carbonate ion in solution. This increases the overlying vapor pressure of carbon dioxide gas, permitting carbon dioxide to be removed from the downstream side of the ion pump as a pure gas. The ion pumping may be obtained from reverse osmosis, electrodialysis, thermal desalination methods, or an ion pump system having an oscillating flow in synchronization with an induced electric field.

Aines, Roger D. (Livermore, CA); Bourcier, William L. (Livermore, CA)

2010-11-09T23:59:59.000Z

97

Carbon ion pump for removal of carbon dioxide from combustion gas and other gas mixtures  

DOE Patents [OSTI]

A novel method and system of separating carbon dioxide from flue gas is introduced. Instead of relying on large temperature or pressure changes to remove carbon dioxide from a solvent used to absorb it from flue gas, the ion pump method, as disclosed herein, dramatically increases the concentration of dissolved carbonate ion in solution. This increases the overlying vapor pressure of carbon dioxide gas, permitting carbon dioxide to be removed from the downstream side of the ion pump as a pure gas. The ion pumping may be obtained from reverse osmosis, electrodialysis, thermal desalination methods, or an ion pump system having an oscillating flow in synchronization with an induced electric field.

Aines, Roger D.; Bourcier, William L.

2014-08-19T23:59:59.000Z

98

Highly stable beta-class carbonic anhydrases useful in carbon capture systems  

DOE Patents [OSTI]

The present disclosure relates to .beta.-class carbonic anhydrase polypeptides having improved properties including increased thermostability and/or stability in the presence of amine compounds, ammonia, or carbonate ion. The present disclosure also provides formulations and uses of the polypeptides for accelerating the absorption of carbon dioxide from a gas stream into a solution as well as for the release of the absorbed carbon dioxide for further treatment and/or sequestering. Also provided are polynucleotides encoding the carbonic anhydrase polypeptides and host cells capable of expressing them.

Alvizo, Oscar; Benoit, Michael R; Novick, Scott J

2013-08-20T23:59:59.000Z

99

Highly stable beta-class carbonic anhydrases useful in carbon capture systems  

DOE Patents [OSTI]

The present disclosure relates to .beta.-class carbonic anhydrase polypeptides having improved properties including increased thermostability and/or stability in the presence of amine compounds, ammonia, or carbonate ion. The present disclosure also provides formulations and uses of the polypeptides for accelerating the absorption of carbon dioxide from a gas stream into a solution as well as for the release of the absorbed carbon dioxide for further treatment and/or sequestering. Also provided are polynucleotides encoding the carbonic anhydrase polypeptides and host cells capable of expressing them.

Alvizo, Oscar; Benoit, Mike; Novick, Scott

2013-04-16T23:59:59.000Z

100

Carbon Fiber  

ScienceCinema (OSTI)

Lee McGetrick leads ORNL's effort to produce light, durable carbon fiber at lower cost -- a key to improvements in manufacturing that will produce more fuel-efficient vehicles and other advances.

McGetrick, Lee

2014-07-23T23:59:59.000Z

Note: This page contains sample records for the topic "ada carbon solutions" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Carbon Fiber  

SciTech Connect (OSTI)

Lee McGetrick leads ORNL's effort to produce light, durable carbon fiber at lower cost -- a key to improvements in manufacturing that will produce more fuel-efficient vehicles and other advances.

McGetrick, Lee

2014-04-17T23:59:59.000Z

102

Carbon Sequestration  

SciTech Connect (OSTI)

Carbon Sequestration- the process of capturing the CO2 released by the burning of fossil fuels and storing it deep withing the Earth, trapped by a non-porous layer of rock.

None

2013-05-06T23:59:59.000Z

103

Thermodynamics of carbon dioxide in aqueous piperazine/potassium carbonate systems at stripper conditions  

E-Print Network [OSTI]

to equivalent solutions of monoethanolamine (MEA). Cullinane [1] measured CO2 solubility with a wetted wall titration of barium carbonate precipitation. The amount of amine was determined through a standard monotonic

Rochelle, Gary T.

104

Global Impacts (Carbon Cycle 2.0)  

ScienceCinema (OSTI)

Ashok Gadgil, Faculty Senior Scientist and Acting Director, EETD, also Professor of Environmental Engineering, UC Berkeley, speaks at the Carbon Cycle 2.0 kick-off symposium Feb. 2, 2010. We emit more carbon into the atmosphere than natural processes are able to remove - an imbalance with negative consequences. Carbon Cycle 2.0 is a Berkeley Lab initiative to provide the science needed to restore this balance by integrating the Labs diverse research activities and delivering creative solutions toward a carbon-neutral energy future. http://carboncycle2.lbl.gov/

Gadgil, Ashok [EETD and UC Berkeley

2011-06-08T23:59:59.000Z

105

Long-Term Carbon Injection Field Test for 90% Mercury Removal for a PRB Unit a Spray Dryer and Fabric Filter  

SciTech Connect (OSTI)

The power industry in the U.S. is faced with meeting regulations to reduce the emissions of mercury compounds from coal-fired plants. Injecting a sorbent such as powdered activated carbon (PAC) into the flue gas represents one of the simplest and most mature approaches to controlling mercury emissions from coal-fired boilers. The purpose of this test program was to evaluate the long-term mercury removal capability, long-term mercury emissions variability, and operating and maintenance (O&M) costs associated with sorbent injection on a configuration being considered for many new plants. Testing was conducted by ADA Environmental Solutions (ADA) at Rocky Mountain Power’s (RMP) Hardin Station through funding provided by DOE/NETL, RMP, and other industry partners. The Hardin Station is a new plant rated at 121 MW gross that was first brought online in April of 2006. Hardin fires a Powder River Basin (PRB) coal and is configured with selective catalytic reduction (SCR) for NOx control, a spray dryer absorber (SDA) for SO2 control, and a fabric filter (FF) for particulate control. Based upon previous testing at PRB sites with SCRs, very little additional mercury oxidation from the SCR was expected at Hardin. In addition, based upon results from DOE/NETL Phase II Round I testing at Holcomb Station and results from similarly configured sites, low native mercury removal was expected across the SDA and FF. The main goal of this project was met—sorbent injection was used to economically and effectively achieve 90% mercury control as measured from the air heater (AH) outlet to the stack for a period of ten months. This goal was achieved with DARCO® Hg-LH, Calgon FLUEPAC®-MC PLUS and ADA Power PAC PREMIUM brominated activated carbons at nominal loadings of 1.5–2.5 lb/MMacf. An economic analysis determined the twenty-year levelized cost to be 0.87 mills/kW-hr, or $15,000/lb Hg removed. No detrimental effects on other equipment or plant operations were observed. The results of this project also filled a data gap for plants firing PRB coal and configured with an SCR, SDA, and FF, as many new plants are being designed today. Another goal of the project was to evaluate, on a short-term basis, the mercury removal associated with coal additives and coal blending with western bituminous coal. The additive test showed that, at this site, the coal additive known as KNX was affective at increasing mercury removal while decreasing sorbent usage. Coal blending was conducted with two different western bituminous coals, and West Elk coal increased native capture from nominally 10% to 50%. Two additional co-benefits were discovered at this site. First, it was found that native capture increased from nominally 10% at full load to 50% at low load. The effect is believed to be due to an increase in mercury oxidation across the SCR caused by a corresponding decrease in ammonia injection when the plant reduces load. Less ammonia means more active oxidation sites in the SCR for the mercury. The second co-benefit was the finding that high ammonia concentrations can have a negative impact on mercury removal by powdered activated carbon. For a period of time, the plant operated with a high excess of ammonia injection necessitated by the plugging of one-third of the SCR. Under these conditions and at high load, the mercury control system could not maintain 90% removal even at the maximum feed rate of 3.5 lb/MMacf (pounds of mercury per million actual cubic feet). The plant was able to demonstrate that mercury removal was directly related to the ammonia injection rate in a series of tests where the ammonia rate was decreased, causing a corresponding increase in mercury removal. Also, after the SCR was refurbished and ammonia injection levels returned to normal, the mercury removal performance also returned to normal. Another goal of the project was to install a commercial-grade activated carbon injection (ACI) system and integrate it with new-generation continuous emissions monitors for mercury (Hg-CEMs) to allow automatic feedback control on outlet me

Sjostrom, Sharon; Amrhein, Jerry

2009-04-30T23:59:59.000Z

106

Carbon Cycle 2.0: Ashok Gadgil: global impact  

ScienceCinema (OSTI)

Ashok Gadgil speaks at the Carbon Cycle 2.0 kick-off symposium Feb. 2, 2010. We emit more carbon into the atmosphere than natural processes are able to remove - an imbalance with negative consequences. Carbon Cycle 2.0 is a Berkeley Lab initiative to provide the science needed to restore this balance by integrating the Labs diverse research activities and delivering creative solutions toward a carbon-neutral energy future. http://carboncycle2.lbl.gov/

Ashok Gadgi

2010-09-01T23:59:59.000Z

107

Energy Demand in China (Carbon Cycle 2.0)  

ScienceCinema (OSTI)

Lynn Price, LBNL scientist, speaks at the Carbon Cycle 2.0 kick-off symposium Feb. 2, 2010. We emit more carbon into the atmosphere than natural processes are able to remove - an imbalance with negative consequences. Carbon Cycle 2.0 is a Berkeley Lab initiative to provide the science needed to restore this balance by integrating the Labs diverse research activities and delivering creative solutions toward a carbon-neutral energy future. http://carboncycle2.lbl.gov/

Price, Lynn

2011-06-08T23:59:59.000Z

108

Biofuels Science and Facilities (Carbon Cycle 2.0)  

ScienceCinema (OSTI)

Jay D. Keasling speaks at the Carbon Cycle 2.0 kick-off symposium Feb. 2, 2010. We emit more carbon into the atmosphere than natural processes are able to remove - an imbalance with negative consequences. Carbon Cycle 2.0 is a Berkeley Lab initiative to provide the science needed to restore this balance by integrating the Labs diverse research activities and delivering creative solutions toward a carbon-neutral energy future. http://carboncycle2.lbl.gov/

Keasling, Jay D

2011-06-03T23:59:59.000Z

109

Low Carbon Fuel Standards  

E-Print Network [OSTI]

gas, or even coal with carbon capture and sequestration. Afuels that facilitate carbon capture and sequestration. Forenergy and could capture and sequester carbon emissions.

Sperling, Dan; Yeh, Sonia

2009-01-01T23:59:59.000Z

110

Carbon supercapacitors  

SciTech Connect (OSTI)

Carbon supercapacitors are represented as distributed RC networks with transmission line equivalent circuits. At low charge/discharge rates and low frequencies these networks approximate a simple series R{sub ESR}C circuit. The energy efficiency of the supercapacitor is limited by the voltage drop across the ESR. The pore structure of the carbon electrode defines the electrochemically active surface area which in turn establishes the volume specific capacitance of the carbon material. To date, the highest volume specific capacitance reported for a supercapacitor electrode is 220F/cm{sup 3} in aqueous H{sub 2}SO{sub 4} (10) and {approximately}60 F/cm{sup 3} in nonaqueous electrolyte (8).

Delnick, F.M.

1993-11-01T23:59:59.000Z

111

REVIEW PAPER Strategies for reducing the carbon footprint of field crops  

E-Print Network [OSTI]

REVIEW PAPER Strategies for reducing the carbon footprint of field crops for semiarid areas emission. To provide the potential solution, we estimated the carbon footprint [i.e., the total amount the effect of crop sequences on the carbon footprint of durum wheat. Key strategies for reducing the carbon

Paris-Sud XI, Université de

112

E-Print Network 3.0 - aqueous urea solutions Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

25 Monodisperse Calcium Carbonate Microtablets Forming at 701C in Prerefrigerated CaCl2GelatinUrea Solutions Summary: of urea in CaCl2-contain- ing aqueous solutions...

113

Carbon microtubes  

DOE Patents [OSTI]

A carbon microtube comprising a hollow, substantially tubular structure having a porous wall, wherein the microtube has a diameter of from about 10 .mu.m to about 150 .mu.m, and a density of less than 20 mg/cm.sup.3. Also described is a carbon microtube, having a diameter of at least 10 .mu.m and comprising a hollow, substantially tubular structure having a porous wall, wherein the porous wall comprises a plurality of voids, said voids substantially parallel to the length of the microtube, and defined by an inner surface, an outer surface, and a shared surface separating two adjacent voids.

Peng, Huisheng (Shanghai, CN); Zhu, Yuntian Theodore (Cary, NC); Peterson, Dean E. (Los Alamos, NM); Jia, Quanxi (Los Alamos, NM)

2011-06-14T23:59:59.000Z

114

Processing, Characterization and Modeling Carbon Nanotube Modified Interfaces in Hybrid Polymer Matrix Composites  

E-Print Network [OSTI]

Multifunctional hybrid composites are proposed as novel solutions to meet the demands in various industrial applications ranging from aerospace to biomedicine. The combination of carbon fibers and/or fabric, metal foil and carbon nanotubes...

Truong, Hieu 1990-

2012-12-04T23:59:59.000Z

115

Carbon Storage Program  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Carbon Sequestration Partnership MSU . . . . . . . . . . . . . . . . . . . . . . . Montana State University MVA . . . . . . . . . . . . . . . . . . . . . . . Monitoring,...

116

Carbon Additionality: Discussion Paper  

E-Print Network [OSTI]

ahead, and identifying the carbon pools and other green house gas emissions sources and savings coveredCarbon Additionality: A review Discussion Paper Gregory Valatin November 2009 Forest Research. Voluntary Carbon Standards American Carbon Registry Forest Carbon Project Standard (ACRFCPS) 27 Carbon

117

A Call to Action: Carbon Cycle 2.0 (Carbon Cycle 2.0)  

ScienceCinema (OSTI)

Berkeley Lab Director Paul Alivisatos speaks at the Carbon Cycle 2.0 kick-off symposium Feb. 1, 2010. Humanity emits more carbon into the atmosphere than natural processes are able to remove - an imbalance with negative consequences.Carbon Cycle 2.0 is a Berkeley Lab initiative to provide the science needed to restore this balance by integrating the Labs diverse research activities and delivering creative solutions toward a carbon-neutral energy future. http://carboncycle2.lbl.gov/

Alivisatos, Paul

2011-06-08T23:59:59.000Z

118

A Future with (out) Carbon Cycle 2.0 (Carbon Cycle 2.0)  

ScienceCinema (OSTI)

Bill Collins, Head of LBNL's Climate Sciences Department, speaks at the Carbon Cycle 2.0 kick-off symposium Feb. 1, 2010. We emit more carbon into the atmosphere than natural processes are able to remove - an imbalance with negative consequences. Carbon Cycle 2.0 is a Berkeley Lab initiative to provide the science needed to restore this balance by integrating the Labs diverse research activities and delivering creative solutions toward a carbon-neutral energy future. http://carboncycle2.lbl.gov/

Collins, Bill

2011-06-08T23:59:59.000Z

119

Data:82bc8ea2-8b5c-4fec-a440-32b1c2a7ada9 | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office695810186 No revisione0a2d50bdf No revision has9-c45258b300ac Noc1e69d7992 No050573 No revisiona440-32b1c2a7ada9

120

Desalination with carbon aerogel electrodes  

SciTech Connect (OSTI)

An electrically regenerated electrosorption process known as carbon aerogel CDI was developed for continuously removing ionic impurities from aqueous streams. A salt solution flows in a channel formed by pairs of parallel carbon aerogel electrodes. Each electrode has a very high BET surface area and very low resistivity. After polarization, anions and cations are removed from electrolyte by the electric field and electrosorbed onto the carbon aerogel. The solution is thus separated into two streams, brine and water. Based on this, carbon aerogel CDI appears to be an energy-efficient alternative to evaporation, electrodialysis, and reverse osmosis. The energy required by this process is about QV/2, plus losses. Estimated energy requirement for sea water desalination is 18-27 Wh gal{sup -1}, depending on cell voltage and flow rate. The requirement for brackish water desalination is less, 1.2-2.5 Wh gal{sup -1} at 1600 ppM. This is assuming that stored electrical energy is reclaimed during regeneration.

Farmer, J.C.; Richardson, J.H.; Fix, D.V.

1996-10-21T23:59:59.000Z

Note: This page contains sample records for the topic "ada carbon solutions" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Carbon Trading, Carbon Taxes and Social Discounting  

E-Print Network [OSTI]

Carbon Trading, Carbon Taxes and Social Discounting Elisa Belfiori belf0018@umn.edu University of Minnesota Abstract This paper considers the optimal design of policies to carbon emissions in an economy, such as price or quantity controls on the net emissions of carbon, are insufficient to achieve the social

Weiblen, George D

122

E-Print Network 3.0 - affects carbon partitioning Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Polarity to Aqueous Summary: and compared with published partition coefficients (Koc) of carbon tetrachloride (CT) from aqueous solution... of the measured partition coefficients...

123

A literature review of actinide-carbonate mineral interactions  

SciTech Connect (OSTI)

Chemical retardation of actinides in groundwater systems is a potentially important mechanism for assessing the performance of the Waste Isolation Pilot Plant (WIPP), a facility intended to demonstrate safe disposal of transuranic waste. Rigorous estimation of chemical retardation during transport through the Culebra Dolomite, a water-bearing unit overlying the WIPP, requires a mechanistic understanding of chemical reactions between dissolved elements and mineral surfaces. This report represents a first step toward this goal by examining the literature for pertinent experimental studies of actinide-carbonate interactions. A summary of existing models is given, along with the types of experiments on which these models are based. Articles pertaining to research into actinide interactions with carbonate minerals are summarized. Select articles involving trace element-carbonate mineral interactions are also reviewed and may serve as templates for future research. A bibliography of related articles is included. Americium(III), and its nonradioactive analog neodymium(III), partition strongly from aqueous solutions into carbonate minerals. Recent thermodynamic, kinetic, and surface studies show that Nd is preferentially removed from solution, forming a Nd-Ca carbonate solid solution. Neptunium(V) is rapidly removed from solution by carbonates. Plutonium incorporation into carbonates is complicated by multiple oxidation states. Little research has been done on the radium(H) and thorium(IV) carbonate systems. Removal of uranyl ion from solution by calcite is limited to monolayer surface coverage.

Stout, D.L. [Missouri Univ., Columbia, MO (United States). Dept. of Geological Sciences; Carroll, S.A. [Lawrence Livermore National Lab., CA (United States)

1993-10-01T23:59:59.000Z

124

Public Review Draft: A Method for Assessing Carbon Stocks, Carbon  

E-Print Network [OSTI]

Public Review Draft: A Method for Assessing Carbon Stocks, Carbon Sequestration, and Greenhouse, and Zhu, Zhiliang, 2010, Public review draft; A method for assessing carbon stocks, carbon sequestration

125

Carbon-Optimal and Carbon-Neutral Supply Chains  

E-Print Network [OSTI]

Li, M. Daskin. 2009. Carbon Footprint and the Management ofThe Importance of Carbon Footprint Estimation Boundaries.Carbon accounting and carbon footprint - more than just

Caro, F.; Corbett, C. J.; Tan, T.; Zuidwijk, R.

2011-01-01T23:59:59.000Z

126

Use of carbonates for biological and chemical synthesis  

DOE Patents [OSTI]

A system of using carbonates, especially water-insoluble or sparing soluble mineral carbonates, for maintaining or increasing dissolved inorganic carbon concentrations in aqueous media. In particular, the system generates concentrated dissolve inorganic carbon substrates for photosynthetic, chemosynthetic, or abiotic chemical production of carbonaceous or other compounds in solution. In some embodiments, the invention can also enhance the dissolution and retention of carbon dioxide in aqueous media, and can produce pH buffering capacity, metal ions, and heat, which can be beneficial to the preceding syntheses.

Rau, Gregory Hudson

2014-09-09T23:59:59.000Z

127

Carbon nanotube fiber spun from wetted ribbon  

DOE Patents [OSTI]

A fiber of carbon nanotubes was prepared by a wet-spinning method involving drawing carbon nanotubes away from a substantially aligned, supported array of carbon nanotubes to form a ribbon, wetting the ribbon with a liquid, and spinning a fiber from the wetted ribbon. The liquid can be a polymer solution and after forming the fiber, the polymer can be cured. The resulting fiber has a higher tensile strength and higher conductivity compared to dry-spun fibers and to wet-spun fibers prepared by other methods.

Zhu, Yuntian T; Arendt, Paul; Zhang, Xiefei; Li, Qingwen; Fu, Lei; Zheng, Lianxi

2014-04-29T23:59:59.000Z

128

Compacted carbon for electrochemical cells  

DOE Patents [OSTI]

This invention provides compacted carbon that is useful in the electrode of an alkali metal/carbon electrochemical cell of improved capacity selected from the group consisting of: (a) coke having the following properties: (1) an x-ray density of at least 2.00 grams per cubic centimeters, (2) a closed porosity of no greater than 5%, and (3) an open porosity of no greater than 47%; and (b) graphite having the following properties: (1) an x-ray density of at least 2.20 grams per cubic centimeters, (2) a closed porosity of no greater than 5%, and (3) an open porosity of no greater than 25%. This invention also relates to an electrode for an alkali metal/carbon electrochemical cell comprising compacted carbon as described above and a binder. This invention further provides an alkali metal/carbon electrochemical cell comprising: (a) an electrode as described above, (b) a non-aqueous electrolytic solution comprising an organic aprotic solvent and an electrolytically conductive salt and an alkali metal, and (c) a counter electrode. 10 figs.

Greinke, R.A.; Lewis, I.C.

1997-10-14T23:59:59.000Z

129

THE DAYLIGHTING SOLUTION  

E-Print Network [OSTI]

1980, pp.l4-20 THE DAYLIGHTING SOLUTION Stephen SelkowitzEEB-W·-80-19 W-74 THE DAYLIGHTING SOLUTION Stephen Selkowitz

Selkowitz, Stephen

2013-01-01T23:59:59.000Z

130

BAYSIDE LOT PERMIT and ADA  

E-Print Network [OSTI]

POTREROAVE ILLINOISST TO 101/280 South via Potrero Ave TO 101 North/ Golden Gate Br Turn right on S. Van Ness BRIDGE subject to long delays TO Bay Bridge 80 East TO Bay Bridge 80 East TO Downtown COURTESY OF MISSION

Derisi, Joseph

131

Photophysics of carbon nanotubes  

E-Print Network [OSTI]

This thesis reviews the recent advances made in optical studies of single-wall carbon nanotubes. Studying the electronic and vibrational properties of carbon nanotubes, we find that carbon nanotubes less than 1 nm in ...

Samsonidze, Georgii G

2007-01-01T23:59:59.000Z

132

CALIFORNIA CARBON SEQUESTRATION THROUGH  

E-Print Network [OSTI]

CALIFORNIA ENERGY COMMISSION CARBON SEQUESTRATION THROUGH CHANGES IN LAND USE IN WASHINGTON. Carbon Sequestration Through Changes in Land Use in Washington: Costs and Opportunities. California for Terrestrial Carbon Sequestration in Oregon. Report to Winrock International. #12;ii #12;iii Preface

133

A Novel Approach to Mineral Carbonation: Enhancing Carbonation While Avoiding Mineral Pretreatment Process Cost  

SciTech Connect (OSTI)

Known fossil fuel reserves, especially coal, can support global energy demands for centuries to come, if the environmental problems associated with CO{sub 2} emissions can be overcome. Unlike other CO{sub 2} sequestration candidate technologies that propose long-term storage, mineral sequestration provides permanent disposal by forming geologically stable mineral carbonates. Carbonation of the widely occurring mineral olivine (e.g., forsterite, Mg{sub 2}SiO{sub 4}) is a large-scale sequestration process candidate for regional implementation, which converts CO{sub 2} into the environmentally benign mineral magnesite (MgCO{sub 3}). The primary goal is cost-competitive process development. As the process is exothermic, it inherently offers low-cost potential. Enhancing carbonation reactivity is key to economic viability. Recent studies at the U.S. DOE Albany Research Center have established that aqueous-solution carbonation using supercritical CO{sub 2} is a promising process; even without olivine activation, 30-50% carbonation has been achieved in an hour. Mechanical activation (e.g., attrition) has accelerated the carbonation process to an industrial timescale (i.e., near completion in less than an hour), at reduced pressure and temperature. However, the activation cost is too high to be economical and lower cost pretreatment options are needed. We have discovered that robust silica-rich passivating layers form on the olivine surface during carbonation. As carbonation proceeds, these passivating layers thicken, fracture and eventually exfoliate, exposing fresh olivine surfaces during rapidly-stirred/circulating carbonation. We are exploring the mechanisms that govern carbonation reactivity and the impact that (1) modeling/controlling the slurry fluid-flow conditions, (2) varying the aqueous ion species/size and concentration (e.g., Li+, Na+, K+, Rb+, Cl-, HCO{sub 3}{sup -}), and (3) incorporating select sonication offer to enhance exfoliation and carbonation. Thus far, we have succeeded in nearly doubling the extent of carbonation observed compared with the optimum procedure previously developed by the Albany Research Center. Aqueous carbonation reactivity was found to be a strong function of the ionic species present and their aqueous activities, as well as the slurry fluid flow conditions incorporated. High concentration sodium, potassium, and sodium/potassium bicarbonate aqueous solutions have been found to be the most effective solutions for enhancing aqueous olivine carbonation to date. Slurry-flow modeling using Fluent indicates that the slurry-flow dynamics are a strong function of particle size and mass, suggesting that controlling these parameters may offer substantial potential to enhance carbonation. During the first project year we developed a new sonication exfoliation apparatus with a novel sealing system to carry out the sonication studies. We also initiated investigations to explore the potential that sonication may offer to enhance carbonation reactivity. During the second project year, we extended our investigations of the effects of sonication on the extent of carbonation as a function of the following parameters: particle size distribution, the mass of solid reactant, volume fraction of aqueous solution present, sonication power, time, temperature, and CO{sub 2} pressure. To date, none of the conditions investigated have significantly enhanced carbonation. Mechanistic investigations of the stirred ({approx}1,500 rpm) aqueous olivine carbonation process indicate the carbonation process involves both incongruent magnesium dissolution and silica precipitation, which results in robust silica-rich passivating layer formation. Secondary ion mass spectrometry observation of H within the passivating layer that forms during static carbonation suggests 2H{sup +}/Mg{sup 2+} ion exchange is associated with incongruent dissolution. Apparently, H{sub 2}O forms at or near the olivine/passivating-layer interface during the process and diffuses out through the passivating layers during the carbonation reaction. This is

Andrew V. G. Chizmeshya; Michael J. McKelvy; Kyle Squires; Ray W. Carpenter; Hamdallah Bearat

2007-06-21T23:59:59.000Z

134

Electrochemical and Raman measurements on single-walled carbon nanotubes  

E-Print Network [OSTI]

Electrochemical and Raman measurements on single-walled carbon nanotubes M. Stoll a,*, P performed on a carbon nanotube mat as a working electrode using different salt solutions. The gravimetric capacitance of the nanotube material was estimated and its effective surface area was de- termined in a purely

Nabben, Reinhard

135

Raman Measurements on Electrochemically Doped Single-Walled Carbon Nanotubes  

E-Print Network [OSTI]

Raman Measurements on Electrochemically Doped Single-Walled Carbon Nanotubes P. M. Rafailov, M and studied the Raman response of electro- chemically doped single-walled carbon nanotubes (SWNT) using different salt solutions. The fre- quency shift of the radial breathing mode (RBM) and the high-energy mode

Nabben, Reinhard

136

Method of making carbon-carbon composites  

DOE Patents [OSTI]

A process for making 2D and 3D carbon-carbon composites having a combined high crystallinity, high strength, high modulus and high thermal and electrical conductivity. High-modulus/high-strength mesophase derived carbon fibers are woven into a suitable cloth. Layers of this easily graphitizible woven cloth are infiltrated with carbon material to form green composites. The carbonized composite is then impregnated several times with pitch by covering the composite with hot pitch under pressure. The composites are given a heat treatment between each impregnant step to crack up the infiltrated carbon and allow additional pitch to enter the microstructure during the next impregnation cycle. The impregnated composites are then given a final heat treatment in the range 2500.degree. to 3100.degree. C. to fully graphitize the fibers and the matrix carbon. The composites are then infiltrated with pyrolytic carbon by chemical vapor deposition in the range 1000.degree. C. to 1300.degree. C. at a reduced. pressure.

Engle, Glen B. (16716 Martincoit Rd., Poway, CA 92064)

1993-01-01T23:59:59.000Z

137

Toward Zero Carbon Energy Production Toward Zero Carbon Energy Production  

E-Print Network [OSTI]

#12;Toward Zero Carbon Energy Production Toward Zero Carbon Energy Production Toward Zero Carbon Energy Production Toward Zero Carbon Energy Production Toward Zero Carbon Energy Production Toward Zero Carbon Energy Production Toward Zero Carbon Energy Production Toward Zero Carbon Energy Production Toward

Narasayya, Vivek

138

Carbon Code Requirements for voluntary carbon sequestration projects  

E-Print Network [OSTI]

Woodland Carbon Code Requirements for voluntary carbon sequestration projects ® Version 1.2 July trademark 10 3. Carbon sequestration 11 3.1 Units of carbon calculation 11 3.2 Carbon baseline 11 3.3 Carbon leakage 12 3.4 Project carbon sequestration 12 3.5 Net carbon sequestration 13 4. Environmental quality 14

139

Low Carbon Fuel Standards  

E-Print Network [OSTI]

in 1990. These many alternative-fuel initiatives failed tolow-cost, low-carbon alternative fuels would thrive. Theto introduce low-carbon alternative fuels. Former Federal

Sperling, Dan; Yeh, Sonia

2009-01-01T23:59:59.000Z

140

Financing Solutions | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Solution Center Financing Solutions Financing Solutions Transitioning to a clean energy economy requires innovative financing solutions that enable state, local, and tribal...

Note: This page contains sample records for the topic "ada carbon solutions" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Carbon nanotube-polymer composite actuators  

DOE Patents [OSTI]

The present invention discloses a carbon nanotube (SWNT)-polymer composite actuator and method to make such actuator. A series of uniform composites was prepared by dispersing purified single wall nanotubes with varying weight percents into a polymer matrix, followed by solution casting. The resulting nanotube-polymer composite was then successfully used to form a nanotube polymer actuator.

Gennett, Thomas (Denver, CO); Raffaelle, Ryne P. (Honeoye Falls, NY); Landi, Brian J. (Rochester, NY); Heben, Michael J. (Denver, CO)

2008-04-22T23:59:59.000Z

142

Acid sorption regeneration process using carbon dioxide  

DOE Patents [OSTI]

Carboxylic acids are sorbed from aqueous feedstocks onto a solid adsorbent in the presence of carbon dioxide under pressure. The acids are freed from the sorbent phase by a suitable regeneration method, one of which is treating them with an organic alkylamine solution thus forming an alkylamine-carboxylic acid complex which thermally decomposes to the desired carboxylic acid and the alkylamine.

King, C. Judson (Kensington, CA); Husson, Scott M. (Anderson, SC)

2001-01-01T23:59:59.000Z

143

Composite carbon foam electrode  

DOE Patents [OSTI]

Carbon aerogels used as a binder for granularized materials, including other forms of carbon and metal additives, are cast onto carbon or metal fiber substrates to form composite carbon thin film sheets. The thin film sheets are utilized in electrochemical energy storage applications, such as electrochemical double layer capacitors (aerocapacitors), lithium based battery insertion electrodes, fuel cell electrodes, and electrocapacitive deionization electrodes. The composite carbon foam may be formed by prior known processes, but with the solid particles being added during the liquid phase of the process, i.e. prior to gelation. The other forms of carbon may include carbon microspheres, carbon powder, carbon aerogel powder or particles, graphite carbons. Metal and/or carbon fibers may be added for increased conductivity. The choice of materials and fibers will depend on the electrolyte used and the relative trade off of system resistivty and power to system energy.

Mayer, Steven T. (San Leandro, CA); Pekala, Richard W. (Pleasant Hill, CA); Kaschmitter, James L. (Pleasanton, CA)

1997-01-01T23:59:59.000Z

144

Composite carbon foam electrode  

DOE Patents [OSTI]

Carbon aerogels used as a binder for granulated materials, including other forms of carbon and metal additives, are cast onto carbon or metal fiber substrates to form composite carbon thin film sheets. The thin film sheets are utilized in electrochemical energy storage applications, such as electrochemical double layer capacitors (aerocapacitors), lithium based battery insertion electrodes, fuel cell electrodes, and electrocapacitive deionization electrodes. The composite carbon foam may be formed by prior known processes, but with the solid particles being added during the liquid phase of the process, i.e. prior to gelation. The other forms of carbon may include carbon microspheres, carbon powder, carbon aerogel powder or particles, graphite carbons. Metal and/or carbon fibers may be added for increased conductivity. The choice of materials and fibers will depend on the electrolyte used and the relative trade off of system resistivity and power to system energy. 1 fig.

Mayer, S.T.; Pekala, R.W.; Kaschmitter, J.L.

1997-05-06T23:59:59.000Z

145

Effect of low po? on growth of bacteria and on loss of soluble carbon from maize roots under hydroponic conditions  

E-Print Network [OSTI]

. . . . . . . . . . . . . . . . . . . . . . - ~ -. 16 Analysis of soluble sugars and total organic carbon (TOC) in root extracts and in the nutrient solution. . . . . . . . . . . . . . . . . 17 vii Page RESULTS. 19 Effect of p02 on soluble total organic carbon (TOC) in roots and solution (2 kpa... on root and shoot dry matter (2 kPa vs. 20. 9 kPa 02). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ~ . ~ . . . . . . . . . 49 Effect of p02 on soluble total organic carbon (TOC) in roots snd solution (0 kPa vs. 20. 9 kPa 02...

Coker, Dennis Lee

1992-01-01T23:59:59.000Z

146

Carbon nanotubes grown on bulk materials and methods for fabrication  

DOE Patents [OSTI]

Disclosed are structures formed as bulk support media having carbon nanotubes formed therewith. The bulk support media may comprise fibers or particles and the fibers or particles may be formed from such materials as quartz, carbon, or activated carbon. Metal catalyst species are formed adjacent the surfaces of the bulk support material, and carbon nanotubes are grown adjacent the surfaces of the metal catalyst species. Methods employ metal salt solutions that may comprise iron salts such as iron chloride, aluminum salts such as aluminum chloride, or nickel salts such as nickel chloride. Carbon nanotubes may be separated from the carbon-based bulk support media and the metal catalyst species by using concentrated acids to oxidize the carbon-based bulk support media and the metal catalyst species.

Menchhofer, Paul A. (Clinton, TN); Montgomery, Frederick C. (Oak Ridge, TN); Baker, Frederick S. (Oak Ridge, TN)

2011-11-08T23:59:59.000Z

147

A Report on the Economics of California's Low Carbon Fuel Standard & Cost Containment Mechanisms  

E-Print Network [OSTI]

Warming Solutions Act of 2006. The program calls for large reductions in the carbon intensity of fuel sold traditional fossil fuels and alternative, low carbon intensity fuels; or if there are capacity or technological constraints to deploying alternative fuels, particularly those with low carbon intensity

Lin, C.-Y. Cynthia

148

NUMERICALANALYSIS OF FREE SURFACE FLOWS IN FIBER SPINNING OF CARBON NANOTUBES  

E-Print Network [OSTI]

NUMERICALANALYSIS OF FREE SURFACE FLOWS IN FIBER SPINNING OF CARBON NANOTUBES C. Halliburton1 , J Flows in Fiber Spinning of Carbon Nanotubes Charles Halliburton1, J. Alex Lee2, Matteo Pasquali2 1. Nano Acknowledgements ·Fibers can be produced from solutions of carbon nanotubes (CNTs) dissolved in chlorosulphonic

149

Carbon Cycle 2.0: Ramamoorthy Ramesh: Low-cost Solar  

ScienceCinema (OSTI)

Feb. 4, 2010: Humanity emits more carbon into the atmosphere than natural processes are able to remove - an imbalance with negative consequences. Carbon Cycle 2.0 is a Berkeley Lab initiative to provide the science needed to restore this balance by integrating the Labs diverse research activities and delivering creative solutions toward a carbon-neutral energy future.

Ramamoorthy Ramesh:

2010-09-01T23:59:59.000Z

150

Carbon Cycle 2.0: Don DePaolo: Geo and Bio Sequestration  

ScienceCinema (OSTI)

Feb. 4, 2010: Humanity emits more carbon into the atmosphere than natural processes are able to remove - an imbalance with negative consequences. Carbon Cycle 2.0 is a Berkeley Lab initiative to provide the science needed to restore this balance by integrating the Labs diverse research activities and delivering creative solutions toward a carbon-neutral energy future.

Don DePaolo:

2010-09-01T23:59:59.000Z

151

Silvia Solano's interest in carbon sequestration was first sparked on a six-month internship  

E-Print Network [OSTI]

Silvia Solano's interest in carbon sequestration was first sparked on a six-month internship experiments combining EOR with carbon sequestration. "I thought this was a win-win solution," she said. "You of a research team conduct- ing a large-scale test of carbon sequestration. "I knew I wanted to learn more about

Yang, Zong-Liang

152

Carbon Cycle 2.0: Don DePaolo: Geo and Bio Sequestration  

SciTech Connect (OSTI)

Feb. 4, 2010: Humanity emits more carbon into the atmosphere than natural processes are able to remove - an imbalance with negative consequences. Carbon Cycle 2.0 is a Berkeley Lab initiative to provide the science needed to restore this balance by integrating the Labs diverse research activities and delivering creative solutions toward a carbon-neutral energy future.

Don DePaolo:

2010-02-16T23:59:59.000Z

153

Low density microcellular carbon or catalytically impregnated carbon foams and process for their preparation  

DOE Patents [OSTI]

Machinable and structurally stable, low density microcellular carbon, and catalytically impregnated carbon, foams, and process for their preparation, are provided. Pulverized sodium chloride is classified to improve particle size uniformity, and the classified particles may be further mixed with a catalyst material. The particles are cold pressed into a compact having internal pores, and then sintered. The sintered compact is immersed and then submerged in a phenolic polymer solution to uniformly fill the pores of the compact with phenolic polymer. The compact is then heated to pyrolyze the phenolic polymer into carbon in the form of a foam. Then the sodium chloride of the compact is leached away with water, and the remaining product is freeze dried to provide the carbon, or catalytically impregnated carbon, foam.

Hooper, R.W.; Pekala, R.W.

1987-04-30T23:59:59.000Z

154

The Woodland Carbon Code  

E-Print Network [OSTI]

The Woodland Carbon Code While society must continue to make every effort to reduce greenhouse gas a role by removing carbon dioxide from the atmosphere. The potential of woodlands to soak up carbon to help compensate for their carbon emissions. But before investing in such projects, people want to know

155

Mesoporous carbon materials  

DOE Patents [OSTI]

A conductive mesoporous carbon composite comprising conductive carbon nanoparticles contained within a mesoporous carbon matrix, wherein the conductive mesoporous carbon composite possesses at least a portion of mesopores having a pore size of at least 10 nm and up to 50 nm, and wherein the mesopores are either within the mesoporous carbon matrix, or are spacings delineated by surfaces of said conductive carbon nanoparticles when said conductive carbon nanoparticles are fused with each other, or both. Methods for producing the above-described composite, devices incorporating them (e.g., lithium batteries), and methods of using them, are also described.

Dai, Sheng; Fulvio, Pasquale Fernando; Mayes, Richard T.; Wang, Xiqing; Sun, Xiao-Guang; Guo, Bingkun

2014-09-09T23:59:59.000Z

156

Data:Ebe2f59a-da2e-484b-a50b-f7e9b86dc38b | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Pagec-01b596aa1744b55997c1cc No revision hasa3e396ee3ebbed0-6678a6880d18Ebe2f59a-da2e-484b-a50b-f7e9b86dc38b No revision has

157

Future Climate Engineering Solutions  

E-Print Network [OSTI]

Future Climate Engineering Solutions Joint report 13 engineering participating engeneering. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 Engineering Solutions ­ A Climate call from engineers. . . . . . . . . . . . . . . . . . . . .23 Summaries of National Reports . . . . . . . . . . . . . . . . . . . .25 Summary of The Climate Plan

158

Ultrafast Nonlinear Spectroscopy of Semiconducting Carbon Nanotubes  

E-Print Network [OSTI]

metallic nanotubes . . . . . . . . . . . . . . . . . Carbon2 Carbon Nanotubes Physical and ElectronicStructure of Carbon Nanotubes . . . . . . . . . .

Graham, Matthew Werden

2010-01-01T23:59:59.000Z

159

Ultrafast Nonlinear Spectroscopy of Semiconducting Carbon Nanotubes  

E-Print Network [OSTI]

2 Carbon Nanotubes Physical andElectronic Structure of Carbon Nanotubes . . . . . . . . . .Photophysics in Semiconducting Carbon Nanotubes . . . . .

Graham, Matthew Werden

2010-01-01T23:59:59.000Z

160

Low Cost Solar Energy Conversion (Carbon Cycle 2.0)  

ScienceCinema (OSTI)

Ramamoorthy Ramesh from LBNL's Materials Science Division speaks at the Carbon Cycle 2.0 kick-off symposium Feb. 2, 2010. We emit more carbon into the atmosphere than natural processes are able to remove - an imbalance with negative consequences. Carbon Cycle 2.0 is a Berkeley Lab initiative to provide the science needed to restore this balance by integrating the Labs diverse research activities and delivering creative solutions toward a carbon-neutral energy future. http://carboncycle2.lbl.gov/

Ramesh, Ramamoorthy

2011-06-08T23:59:59.000Z

Note: This page contains sample records for the topic "ada carbon solutions" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Carbon Cycle 2.0: Paul Alivisatos: Introduction  

ScienceCinema (OSTI)

Berkeley Lab Director Paul Alivisatos speaks at the Carbon Cycle 2.0 kick-off symposium Feb. 1, 2010. Humanity emits more carbon into the atmosphere than natural processes are able to remove - an imbalance with negative consequences.Carbon Cycle 2.0 is a Berkeley Lab initiative to provide the science needed to restore this balance by integrating the Labs diverse research activities and delivering creative solutions toward a carbon-neutral energy future. http://carboncycle2.lbl.gov/

Paul Alivisatos

2010-09-01T23:59:59.000Z

162

Extracting alcohols from aqueous solutions. [USDOE patent application  

DOE Patents [OSTI]

The objective is to provide an efficient process for extracting alcohols in aqueous solutions into hydrocarbon fuel mixtures, such as gasoline, diesel fuel and fuel oil. This is done by contacting an aqueous fermentation liquor with a hydrocarbon or hydrocarbon mixture containing carbon compounds having 5-18 carbon atoms, which may include gasoline, diesel fuel or fuel oil. The hydrocarbon-aqueous alcohol solution is then mixed with one or more of a group of polyoxyalkylene polymers to extract the alcohol into the hydrocarbon fuel-polyoxyalkylene polymer mixture.

Compere, A.L.; Googin, J.M.; Griffith, W.L.

1981-12-02T23:59:59.000Z

163

Combustion and Carbon Cycle 2.0 and Computation in CC 2.0 (Carbon Cycle 2.0)  

ScienceCinema (OSTI)

Robert Cheng and Juan Meza provide two presentations in one session at the Carbon Cycle 2.0 kick-off symposium Feb. 3, 2010. We emit more carbon into the atmosphere than natural processes are able to remove - an imbalance with negative consequences. Carbon Cycle 2.0 is a Berkeley Lab initiative to provide the science needed to restore this balance by integrating the Labs diverse research activities and delivering creative solutions toward a carbon-neutral energy future. http://carboncycle2.lbl.gov/

Cheng, Robert K; Meza, Juan

2011-06-08T23:59:59.000Z

164

Carbon Cycle 2.0: Mary Ann Piette: Impact of efficient buildings  

SciTech Connect (OSTI)

Mary Ann Piette speaks at the Carbon Cycle 2.0 kick-off symposium Feb. 2, 2010. We emit more carbon into the atmosphere than natural processes are able to remove - an imbalance with negative consequences. Carbon Cycle 2.0 is a Berkeley Lab initiative to provide the science needed to restore this balance by integrating the Labs diverse research activities and delivering creative solutions toward a carbon-neutral energy future. http://carboncycle2.lbl.gov/

Mary Ann Piette

2010-02-09T23:59:59.000Z

165

Energy Storage: Breakthrough in Battery Technologies (Carbon Cycle 2.0)  

ScienceCinema (OSTI)

Nitash Balsara speaks at the Carbon Cycle 2.0 kick-off symposium Feb. 2, 2010. We emit more carbon into the atmosphere than natural processes are able to remove - an imbalance with negative consequences. Carbon Cycle 2.0 is a Berkeley Lab initiative to provide the science needed to restore this balance by integrating the Labs diverse research activities and delivering creative solutions toward a carbon-neutral energy future. http://carboncycle2.lbl.gov/

Balsara, Nitash

2011-06-03T23:59:59.000Z

166

Carbon Cycle 2.0: Mary Ann Piette: Impact of efficient buildings  

ScienceCinema (OSTI)

Mary Ann Piette speaks at the Carbon Cycle 2.0 kick-off symposium Feb. 2, 2010. We emit more carbon into the atmosphere than natural processes are able to remove - an imbalance with negative consequences. Carbon Cycle 2.0 is a Berkeley Lab initiative to provide the science needed to restore this balance by integrating the Labs diverse research activities and delivering creative solutions toward a carbon-neutral energy future. http://carboncycle2.lbl.gov/

Mary Ann Piette

2010-09-01T23:59:59.000Z

167

Carbon Cycle 2.0: Bill Collins: A future without CC2.0  

ScienceCinema (OSTI)

Bill Collins speaks at the Carbon Cycle 2.0 kick-off symposium Feb. 1, 2010. We emit more carbon into the atmosphere than natural processes are able to remove - an imbalance with negative consequences. Carbon Cycle 2.0 is a Berkeley Lab initiative to provide the science needed to restore this balance by integrating the Labs diverse research activities and delivering creative solutions toward a carbon-neutral energy future. http://carboncycle2.lbl.gov/

Bill Collins

2010-09-01T23:59:59.000Z

168

Carbon fuel cells with carbon corrosion suppression  

DOE Patents [OSTI]

An electrochemical cell apparatus that can operate as either a fuel cell or a battery includes a cathode compartment, an anode compartment operatively connected to the cathode compartment, and a carbon fuel cell section connected to the anode compartment and the cathode compartment. An effusion plate is operatively positioned adjacent the anode compartment or the cathode compartment. The effusion plate allows passage of carbon dioxide. Carbon dioxide exhaust channels are operatively positioned in the electrochemical cell to direct the carbon dioxide from the electrochemical cell.

Cooper, John F. (Oakland, CA)

2012-04-10T23:59:59.000Z

169

Corrosion Testing of Carbon Steel in Acid Cleaning Solutions  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation Proposed Newcatalyst phases on γ-Al2O3. |ID#: 19834 Title: Correlation ofBurn89

170

Pyrophoric metal-carbon foam composites and methods of making the same  

DOE Patents [OSTI]

A method for creating a pyrophoric material according to one embodiment includes thermally activating a carbon foam for creating micropores therein; contacting the activated carbon foam with a liquid solution comprising a metal salt for depositing metal ions in the carbon foam; and reducing the metal ions in the foam to metal particles. A pyrophoric material in yet another embodiment includes a pyrophoric metal-carbon foam composite comprising a carbon foam having micropores and mesopores and a surface area of greater than or equal to about 2000 m.sup.2/g, and metal particles in the pores of the carbon foam. Additional methods and materials are also disclosed.

Gash, Alexander E. (Brentwood, CA); Satcher, Jr., Joe H. (Patterson, CA); Simpson, Randall L. (Livermore, CA); Baumann, Theodore F. (Discovery Bay, CA); Worsley, Marcus A. (Belmont, CA)

2012-05-08T23:59:59.000Z

171

Soil metagenomics and carbon cycling  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Soil metagenomics and carbon cycling Soil metagenomics and carbon cycling Establishing a foundational understanding of the microbial and ecosystem factors that control carbon...

172

Carbon Nanostructure-Based Sensors  

E-Print Network [OSTI]

Control of Single-Walled Carbon Nanotube Functionalization.M. S. Characterizing carbon nanotube samples with resonancewith a Single-Walled Carbon Nanotube Capacitor. Science

Sarkar, Tapan

2012-01-01T23:59:59.000Z

173

The Australian terrestrial carbon budget  

E-Print Network [OSTI]

Australian terrestrial carbon budget Open Access 3 , G. P.The Australian terrestrial carbon budget Luo, C. , Mahowald,terrestrial carbon budget Richards, G. P. , Borough, C. ,

2013-01-01T23:59:59.000Z

174

Large Magnetization at Carbon Surfaces  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Large Magnetization at Carbon Surfaces Large Magnetization at Carbon Surfaces Print Wednesday, 31 August 2011 00:00 From organic matter to pencil lead, carbon is a versatile...

175

Carbon dioxide sequestration by aqueous mineral carbonation of magnesium silicate minerals  

SciTech Connect (OSTI)

The dramatic increase in atmospheric carbon dioxide since the Industrial Revolution has caused concerns about global warming. Fossil-fuel-fired power plants contribute approximately one third of the total human-caused emissions of carbon dioxide. Increased efficiency of these power plants will have a large impact on carbon dioxide emissions, but additional measures will be needed to slow or stop the projected increase in the concentration of atmospheric carbon dioxide. By accelerating the naturally occurring carbonation of magnesium silicate minerals it is possible to sequester carbon dioxide in the geologically stable mineral magnesite (MgCO3). The carbonation of two classes of magnesium silicate minerals, olivine (Mg2SiO4) and serpentine (Mg3Si2O5(OH)4), was investigated in an aqueous process. The slow natural geologic process that converts both of these minerals to magnesite can be accelerated by increasing the surface area, increasing the activity of carbon dioxide in the solution, introducing imperfections into the crystal lattice by high-energy attrition grinding, and in the case of serpentine, by thermally activating the mineral by removing the chemically bound water. The effect of temperature is complex because it affects both the solubility of carbon dioxide and the rate of mineral dissolution in opposing fashions. Thus an optimum temperature for carbonation of olivine is approximately 185 degrees C and 155 degrees C for serpentine. This paper will elucidate the interaction of these variables and use kinetic studies to propose a process for the sequestration of the carbon dioxide.

Gerdemann, Stephen J.; Dahlin, David C.; O'Connor, William K.; Penner, Larry R.

2003-01-01T23:59:59.000Z

176

Method for gettering organic, inorganic and elemental iodine in aqueous solutions  

DOE Patents [OSTI]

A process for the removal of iodine from aqueous solutions, particularly the trapping of radioactive iodine to mitigate damage resulting from accidents or spills associated with nuclear reactors, by exposing the solution to well dispersed silver carbonate which reacts with the iodine and iodides, thereby gettering iodine and iodine compounds from solution. The iodine is not only removed from solution but also from the contiguous vapor.

Beahm, Edward C. (Oak Ridge, TN); Shockley, William E. (Oak Ridge, TN)

1990-01-01T23:59:59.000Z

177

Method of making carbon-carbon composites  

DOE Patents [OSTI]

A process for making a carbon-carbon composite having a combination of high crystallinity, high strength, high modulus and high thermal and electrical conductivity. High-modulus/high-strength mesophase derived carbon fibers are woven into a suitable cloth. Layers of this easily graphitizable woven cloth are covered with petroleum or coal tar pitch and pressed at a temperature a few degrees above the softening point of the pitch to form a green laminated composite. The green composite is restrained in a suitable fixture and heated slowly to carbonize the pitch binder. The carbonized composite is then impregnated several times with pitch by covering the composite with hot pitch under pressure. The composites are given a heat treatment between each impregnation step to crack up the infiltrated carbon and allow additional pitch to enter the microstructure during the next impregnation cycle. The impregnated composites are then given a final heat treatment in the range 2500.degree. to 3000.degree. C. to fully graphitize the fibers and the matrix carbon. The composites are then infiltrated with pyrolytic carbon by chemical vapor deposition in the range 1000.degree. to 1300.degree. C. at a reduced pressure for approximately one hundred and fifty (150) hours.

Engle, Glen B. (16716 Martincoit Rd., Poway, CA 92064)

1991-01-01T23:59:59.000Z

178

Solution deposition assembly  

DOE Patents [OSTI]

Methods and devices are provided for improved deposition systems. In one embodiment of the present invention, a deposition system is provided for use with a solution and a substrate. The system comprises of a solution deposition apparatus; at least one heating chamber, at least one assembly for holding a solution over the substrate; and a substrate curling apparatus for curling at least one edge of the substrate to define a zone capable of containing a volume of the solution over the substrate. In another embodiment of the present invention, a deposition system for use with a substrate, the system comprising a solution deposition apparatus; at heating chamber; and at least assembly for holding solution over the substrate to allow for a depth of at least about 0.5 microns to 10 mm.

Roussillon, Yann; Scholz, Jeremy H; Shelton, Addison; Green, Geoff T; Utthachoo, Piyaphant

2014-01-21T23:59:59.000Z

179

Carbon nanotube nanoelectrode arrays  

DOE Patents [OSTI]

The present invention relates to microelectode arrays (MEAs), and more particularly to carbon nanotube nanoelectrode arrays (CNT-NEAs) for chemical and biological sensing, and methods of use. A nanoelectrode array includes a carbon nanotube material comprising an array of substantially linear carbon nanotubes each having a proximal end and a distal end, the proximal end of the carbon nanotubes are attached to a catalyst substrate material so as to form the array with a pre-determined site density, wherein the carbon nanotubes are aligned with respect to one another within the array; an electrically insulating layer on the surface of the carbon nanotube material, whereby the distal end of the carbon nanotubes extend beyond the electrically insulating layer; a second adhesive electrically insulating layer on the surface of the electrically insulating layer, whereby the distal end of the carbon nanotubes extend beyond the second adhesive electrically insulating layer; and a metal wire attached to the catalyst substrate material.

Ren, Zhifeng (Newton, MA); Lin, Yuehe (Richland, WA); Yantasee, Wassana (Richland, WA); Liu, Guodong (Fargo, ND); Lu, Fang (Burlingame, CA); Tu, Yi (Camarillo, CA)

2008-11-18T23:59:59.000Z

180

Carbon Monoxide Safety Tips  

E-Print Network [OSTI]

Protect yourself and your family from the deadly effects of carbon monoxide--a colorless, odorless poisonous gas. This publication describes the warning signs of carbon monoxide exposure and includes a home safety checklist....

Shaw, Bryan W.; Garcia, Monica L.

1999-07-26T23:59:59.000Z

Note: This page contains sample records for the topic "ada carbon solutions" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Time-dependent release of iron from soot particles by acid extraction and the reduction of fe3+ by elemental carbon  

E-Print Network [OSTI]

Elemental carbon reduces Fe3+ to Fe2+ in aqueous solutions. This process has potential implications in the adverse health effects of fine particles in air pollution, because both elemental carbon and iron are major components in atmospheric...

Drake, Stephen James

2009-05-15T23:59:59.000Z

182

ESM 271 Carbon Footprints and Carbon Accounting Instructor: Sangwon Suh  

E-Print Network [OSTI]

1 ESM 271 Carbon Footprints and Carbon Accounting Instructor: Sangwon Suh Bren hall 3422, suh Week 1: Introduction to carbon footprint and carbon account - Background: carbon awareness, major out a report or a web site about carbon footprint results of a product or of a company. Write a two

California at Santa Barbara, University of

183

Mixed oxide solid solutions  

DOE Patents [OSTI]

The present invention is a mixed oxide solid solution containing a tetravalent and a pentavalent cation that can be used as a support for a metal combustion catalyst. The invention is furthermore a combustion catalyst containing the mixed oxide solid solution and a method of making the mixed oxide solid solution. The tetravalent cation is zirconium(+4), hafnium(+4) or thorium(+4). In one embodiment, the pentavalent cation is tantalum(+5), niobium(+5) or bismuth(+5). Mixed oxide solid solutions of the present invention exhibit enhanced thermal stability, maintaining relatively high surface areas at high temperatures in the presence of water vapor.

Magno, Scott (Dublin, CA); Wang, Ruiping (Fremont, CA); Derouane, Eric (Liverpool, GB)

2003-01-01T23:59:59.000Z

184

Big Sky Carbon Atlas  

DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

(Acknowledgment to the Big Sky Carbon Sequestration Partnership (BSCSP); see home page at http://www.bigskyco2.org/)

185

Impacting US Industry Today A Snapshot of Innovative Solutions at Work for You  

E-Print Network [OSTI]

· Consortium members Ford and Dow team to bring low-cost, high-volume carbon ber to next- generation vehicles electri cation of automotive drivetrains and provide stationary energy storage solutions. CHALLENGE Most

186

Impacting US Industry Today A Snapshot of Innovative Solutions at Work for You  

E-Print Network [OSTI]

team up to bring low-cost, high-volume carbon ber composites to next-generation vehicles. Driving Costs full electri cation of automotive drivetrains and provides stationary storage solutions that enable

Oak Ridge National Laboratory

187

Decomposition Studies of Triphenylboron, Diphenylborinic Acid and Phenylboric Acid in Aqueous Alkaline Solutions Containing Copper  

SciTech Connect (OSTI)

This report documents the copper-catalyzed chemical kinetics of triphenylboron, diphenylborinic acid and phenylboric acid (3PB, 2PB and PBA) in aqueous alkaline solution contained in carbon-steel vessels between 40 and 70 degrees C.

Crawford, C.L. [Westinghouse Savannah River Company, AIKEN, SC (United States); Peterson, R. A.

1997-02-11T23:59:59.000Z

188

Intro to Carbon Sequestration  

ScienceCinema (OSTI)

NETL's Carbon Sequestration Program is helping to develop technologies to capture, purify, and store carbon dioxide (CO2) in order to reduce greenhouse gas emissions without adversely influencing energy use or hindering economic growth. Carbon sequestration technologies capture and store CO2 that would otherwise reside in the atmosphere for long periods of time.

None

2010-01-08T23:59:59.000Z

189

Intro to Carbon Sequestration  

SciTech Connect (OSTI)

NETL's Carbon Sequestration Program is helping to develop technologies to capture, purify, and store carbon dioxide (CO2) in order to reduce greenhouse gas emissions without adversely influencing energy use or hindering economic growth. Carbon sequestration technologies capture and store CO2 that would otherwise reside in the atmosphere for long periods of time.

2008-03-06T23:59:59.000Z

190

CORROSION TESTING IN SIMULATED TANK SOLUTIONS  

SciTech Connect (OSTI)

Three simulated waste solutions representing wastes from tanks SY-102 (high nitrate, modified to exceed guidance limits), AN-107, and AY-102 were supplied by PNNL. Out of the three solutions tested, both optical and electrochemical results show that carbon steel samples corroded much faster in SY-102 (high nitrate) than in the other two solutions with lower ratios of nitrate to nitrite. The effect of the surface preparation was not as strong as the effect of solution chemistry. In areas with pristine mill-scale surface, no corrosion occurred even in the SY-102 (high nitrate) solution, however, corrosion occurred in the areas where the mill-scale was damaged or flaked off due to machining. Localized corrosion in the form of pitting in the vapor space of tank walls is an ongoing challenge to overcome in maintaining the structural integrity of the liquid waste tanks at the Savannah River and Hanford Sites. It has been shown that the liquid waste condensate chemistry influences the amount of corrosion that occurs along the walls of the storage tanks. To minimize pitting corrosion, an effort is underway to gain an understanding of the pitting response in various simulated waste solutions. Electrochemical testing has been used as an accelerated tool in the investigation of pitting corrosion. While significant effort has been undertaken to evaluate the pitting susceptibility of carbon steel in various simulated waste solutions, additional effort is needed to evaluate the effect of liquid waste supernates from six Hanford Site tanks (AY-101, AY-102, AN-102, AN-107, SY-102 (high Cl{sup -}), and SY-102 (high nitrate)) on carbon steel. Solutions were formulated at PNNL to replicate tank conditions, and in the case of SY-102, exceed Cl{sup -} and NO{sub 3}{sup -} conditions, respectively, to provide a contrast between in and out of specification limits. The majority of previous testing has been performed on pristine polished samples. To evaluate the actual tank carbon steel surface, efforts are needed to compare the polished surfaces to corroded and mill-scale surfaces, which are more likely to occur in application. Additionally, due to the change in liquid waste levels within the tanks, salt deposits are highly likely to be present along the tank wall. When the level of the tank decreases, a salt deposit will form as the solution evaporates. The effects of this pre-existing salt, or supernate deposit, are unknown at this time on the corrosion effect and thus require investigation. Additionally, in the presence of radiation, moist air undergoes radiolysis, forming a corrosive nitric acid condensate. This condensate could accelerate the corrosion process in the vapor space. To investigate this process, an experimental apparatus simulating the effects of radiation was designed and constructed to provide gamma irradiation while coupons are exposed to a simulate tank solution. Additionally, ammonia vapors will also be introduced to further represent the tank environment.

Hoffman, E.

2010-12-09T23:59:59.000Z

191

Dispersant solutions for dispersing hydrocarbons  

DOE Patents [OSTI]

A dispersant solution includes a hydrocarbon dispersing solution derived from a bacterium from ATCC 75527, ATCC 75529, or ATCC 55638.

Tyndall, Richard L. (Clinton, TN)

1997-01-01T23:59:59.000Z

192

Dispersant solutions for dispersing hydrocarbons  

DOE Patents [OSTI]

A dispersant solution includes a hydrocarbon dispersing solution derived from a bacterium from ATCC 75527, ATCC 75529, or ATCC 55638.

Tyndall, R.L.

1997-03-11T23:59:59.000Z

193

SmallholderSmallholder CarbonCarbon AgroforestryAgroforestry && Carbon for Poverty ReductionCarbon for Poverty Reduction  

E-Print Network [OSTI]

SmallholderSmallholder CarbonCarbon AgroforestryAgroforestry && Carbon for Poverty ReductionCarbon for Poverty Reduction Roundtable (CAPR)Roundtable (CAPR) GEO Forest Monitoring SymposiumGEO Forest Monitoring)Amazon Initiative Consortium (IA) #12;Carbon for Poverty Reduction Roundtable (CAPR)Carbon for Poverty Reduction

194

Methane Production in Microbial Reverse-Electrodialysis Methanogenesis Cells (MRMCs) Using Thermolytic Solutions  

E-Print Network [OSTI]

with carbon black, CC/CB; or a plain graphite fiber brush, GFB) and a thermolytic solution (ammonium different cathode materials (stainless steel mesh coated with platinum, SS/Pt; carbon cloth coated the SS/Pt biocathode, with a Coulombic recovery of 75 ± 2% and energy efficiency of 7.0 ± 0.3%. The CC

195

Formation of Carbon Dwarfs  

E-Print Network [OSTI]

We consider the formation of dwarf carbon stars via accretion from a carbon AGB companion in light of the new 107 object sample of Downes et al. (2004). This sample is now large enough to allow good mass determination via comparison of a composite spectrum to theoretical atmospheric models. Carbon dwarfs of spectral type M are indeed main sequence M dwarfs with enhanced metallicity and carbon abundance. We also calculate the predicted abundance of both M and of F/G carbon dwarfs, and show that the latter should be falsifiable in the near future.

Charles L. Steinhardt; Dimitar D. Sasselov

2012-01-27T23:59:59.000Z

196

High-performance carbon nanotube-implanted mesoporous carbon spheres for supercapacitors with low series resistance  

SciTech Connect (OSTI)

Research highlights: {yields} CNTs-implanted porous carbon spheres are prepared by using gelatin as soft template. {yields} Homogeneously distributed CNTs form a well-develop network in carbon spheres. {yields} CNTs act as a reinforcing backbone assisting the formation of pore structure. {yields} CNTs improve electrical conductivity and specific capacitance of supercapacitor. -- Abstract: Carbon nanotube-implanted mesoporous carbon spheres were prepared by an easy polymerization-induced colloid aggregation method using gelatin as a soft template. Scanning electron microscopy, transmission electron microscopy and nitrogen adsorption-desorption measurements reveal that the materials are mesoporous carbon spheres, with a diameter of {approx}0.5-1.0 {mu}m, a specific surface area of 284 m{sup 2}/g and average pore size of 3.9 nm. Using the carbon nanotube-implanted mesoporous carbon spheres as electrode material for supercapacitors in an aqueous electrolyte solution, a low equivalent series resistance of 0.83 {Omega} cm{sup 2} and a maximum specific capacitance of 189 F/g with a measured power density of 8.7 kW/kg at energy density of 6.6 Wh/kg are obtained.

Yi, Bin [College of Materials Science and Engineering, Hunan University, Changsha 410082 (China)] [College of Materials Science and Engineering, Hunan University, Changsha 410082 (China); Chen, Xiaohua, E-mail: hudacxh62@yahoo.com.cn [College of Materials Science and Engineering, Hunan University, Changsha 410082 (China)] [College of Materials Science and Engineering, Hunan University, Changsha 410082 (China); Guo, Kaimin [College of Physics and Electronic Science, Changsha University of Science and Technology (China)] [College of Physics and Electronic Science, Changsha University of Science and Technology (China); Xu, Longshan [Department of Mechanical Engineering, Xiamen University of Technology, Xiamen 361024 (China)] [Department of Mechanical Engineering, Xiamen University of Technology, Xiamen 361024 (China); Chen, Chuansheng [College of Physics and Electronic Science, Changsha University of Science and Technology (China)] [College of Physics and Electronic Science, Changsha University of Science and Technology (China); Yan, Haimei; Chen, Jianghua [College of Materials Science and Engineering, Hunan University, Changsha 410082 (China)] [College of Materials Science and Engineering, Hunan University, Changsha 410082 (China)

2011-11-15T23:59:59.000Z

197

A Novel Approach To Mineral Carbonation: Enhancing Carbonation While Avoiding Mineral Pretreatment Process Cost  

SciTech Connect (OSTI)

Known fossil fuel reserves, especially coal, can support global energy demands for centuries to come, if the environmental problems associated with CO{sub 2} emissions can be overcome. Unlike other CO{sub 2} sequestration candidate technologies that propose long-term storage, mineral sequestration provides permanent disposal by forming geologically stable mineral carbonates. Carbonation of the widely occurring mineral olivine (e.g., forsterite, Mg{sub 2}SiO{sub 4}) is a large-scale sequestration process candidate for regional implementation, which converts CO{sub 2} into the environmentally benign mineral magnesite (MgCO{sub 3}). The primary goal is cost-competitive process development. As the process is exothermic, it inherently offers low-cost potential. Enhancing carbonation reactivity is key to economic viability. Recent studies at the U.S. DOE Albany Research Center have established that aqueous-solution carbonation using supercritical CO{sub 2} is a promising process; even without olivine activation, 30-50% carbonation has been achieved in an hour. Mechanical activation (e.g., attrition) has accelerated the carbonation process to an industrial timescale (i.e., near completion in less than an hour), at reduced pressure and temperature. However, the activation cost is too high to be economical and lower cost pretreatment options are needed. Herein, we report our second year progress in exploring a novel approach that offers the potential to substantially enhance carbonation reactivity while bypassing pretreatment activation. As our second year progress is intimately related to our earlier work, the report is presented in that context to provide better overall understanding of the progress made. We have discovered that robust silica-rich passivating layers form on the olivine surface during carbonation. As carbonation proceeds, these passivating layers thicken, fracture and eventually exfoliate, exposing fresh olivine surfaces during rapidly-stirred/circulating carbonation. We are exploring the mechanisms that govern carbonation reactivity and the impact that (i) modeling/controlling the slurry fluid-flow conditions, (ii) varying the aqueous ion species/size and concentration (e.g., Li{sup +}, Na{sup +}, K{sup +}, Rb{sup +}, Cl{sup -}, HCO{sub 3}{sup -}), and (iii) incorporating select sonication offer to enhance exfoliation and carbonation. We have succeeded in nearly doubling the extent of carbonation observed compared with the optimum procedure previously developed by the Albany Research Center. Aqueous carbonation reactivity was found to be a strong function of the ionic species present and their aqueous activities, as well as the slurry fluid flow conditions incorporated. High concentration sodium, potassium, and sodium/potassium bicarbonate aqueous solutions have been found to be the most effective solutions for enhancing aqueous olivine carbonation to date. Slurry-flow modeling using Fluent indicates that the slurry-flow dynamics are a strong function of particle size and mass, suggesting that controlling these parameters may offer substantial potential to enhance carbonation. Synergistic control of the slurry-flow and aqueous chemistry parameters offers further potential to improve carbonation reactivity, which is being investigated during the no-cost extension period. During the first project year we developed a new sonication exfoliation system with a novel sealing system to carry out the sonication studies. We also initiated(Abstract truncated).

Michael J. McKelvy; Andrew V. G. Chizmeshya; Kyle Squires; Ray W. Carpenter; Hamdallah Bearat

2006-06-21T23:59:59.000Z

198

Carbon dissolution and diffusion in ferrite and austenite from first principles D. E. Jiang and Emily A. Carter  

E-Print Network [OSTI]

Carbon dissolution and diffusion in ferrite and austenite from first principles D. E. Jiang. The solution enthalpy of carbon in an octahedral site in ferrite is predicted to be 0.74 eV, i solubility of C in austenite compared to ferrite. The MEP shows that carbon moves linearly from an octahedral

Carter, Emily A.

199

Electrical impedance tomography of carbon nanotube composite Tsung-Chin Hou, Kenneth J. Loh, Jerome P. Lynch1  

E-Print Network [OSTI]

Electrical impedance tomography of carbon nanotube composite materials Tsung-Chin Hou, Kenneth J composites with the carbon nanotube significantly contributing to bulk material properties. One approach. Carbon nanotubes are included in the composite material by dispersing them in the polyanionic solution

Lynch, Jerome P.

200

Carbon in detonations  

SciTech Connect (OSTI)

We review three principal results from a five year study of carbon and its properties in detonations and discuss the implications of these results to the behavior of explosives. We first present a new determination of the carbon melt line from release wave velocity measurements in the shocked state. We then outline a colloidal theory of carbon clustering which from diffusion limited coagulation predicts a slow energy release rate for the carbon chemistry. Finally, we show the results from the examination of recovered soot. Here we see support for the colloid theory and find the diamond phase of carbon. The main theme of this paper is that the carbon in detonation products is in the form of a colloidal suspension of carbon clusters which grow through diffusion limited collisions. Even the final state is not bulk graphite or diamond, but is a collection of small, less than 100 /angstrom/A, diamond and graphitic clusters. 23 refs., 4 figs.

Johnson, J.D.

1989-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "ada carbon solutions" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Combining geothermal energy with CO2 storage Feasibility study of low temperature geothermal electricity production using carbon dioxide as working and storage fluid.  

E-Print Network [OSTI]

??Abstract One of the emerging solutions for today’s excess of carbon dioxide emissions, which is one of the major causes of global warming, is the… (more)

Janse, D.H.M.

2010-01-01T23:59:59.000Z

202

Carbon dioxide sensor  

DOE Patents [OSTI]

The present invention generally relates to carbon dioxide (CO.sub.2) sensors. In one embodiment, the present invention relates to a carbon dioxide (CO.sub.2) sensor that incorporates lithium phosphate (Li.sub.3PO.sub.4) as an electrolyte and sensing electrode comprising a combination of lithium carbonate (Li.sub.2CO.sub.3) and barium carbonate (BaCO.sub.3). In another embodiment, the present invention relates to a carbon dioxide (CO.sub.2) sensor has a reduced sensitivity to humidity due to a sensing electrode with a layered structure of lithium carbonate and barium carbonate. In still another embodiment, the present invention relates to a method of producing carbon dioxide (CO.sub.2) sensors having lithium phosphate (Li.sub.3PO.sub.4) as an electrolyte and sensing electrode comprising a combination of lithium carbonate (Li.sub.2CO.sub.3) and barium carbonate (BaCO.sub.3).

Dutta, Prabir K. (Worthington, OH); Lee, Inhee (Columbus, OH); Akbar, Sheikh A. (Hilliard, OH)

2011-11-15T23:59:59.000Z

203

Evaporation/ Solution Droplet  

E-Print Network [OSTI]

· Nano-Catalysts · Fine Powders · Spray Drying MoO3 As prepared initially. After thermal annealing at 350oC. Hollow Spheres and Crystals 1st Hollow Crystals! Cooling bath Titanium Horn Collar & O-Rings Gas Production of Nano-Materials microporous shell internal macropores Hierarchically Porous Carbons Brandon Ito

Suslick, Kenneth S.

204

Strategic Biomass Solutions (Mississippi)  

Broader source: Energy.gov [DOE]

The Strategic Biomass Solutions (SBS) was formed by the Mississippi Technology Alliance in June 2009. The purpose of the SBS is to provide assistance to existing and potential companies, investors...

205

Solution to Quiz 1  

E-Print Network [OSTI]

Sep 5, 2013 ... over the next four years: Cash Flow at End of Year Amount of Cash Flow. 1. 1 Million. 2 ... project is 8%. Calculate X . Solution: By definition, the ...

jeffb_000

2014-01-14T23:59:59.000Z

206

Solutions of Penrose's Equation  

E-Print Network [OSTI]

The computational use of Killing potentials which satisfy Penrose's equation is discussed. Penrose's equation is presented as a conformal Killing-Yano equation and the class of possible solutions is analyzed. It is shown that solutions exist in spacetimes of Petrov type O, D or N. In the particular case of the Kerr background, it is shown that there can be no Killing potential for the axial Killing vector.

E. N. Glass; Jonathan Kress

1998-09-27T23:59:59.000Z

207

Voluntary Carbon Confusion: A Consumer's Guide to Purchasing Carbon Offsets  

E-Print Network [OSTI]

Voluntary Carbon Confusion: A Consumer's Guide to Purchasing Carbon Offsets and Renewable Energy 4 Report Introduction 5 Product Types 5 A. Carbon Offsets 5 B. Certified Emission Reductions (CERs. Voluntary Carbon Confusion: A Consumer's Guide to Purchasing Carbon Offsets and Renewable Energy

Hoffman, Andrew J.

208

Carbon RRLs Carbon RRLs towards Ultra-compact HII Regions  

E-Print Network [OSTI]

Carbon RRLs Carbon RRLs towards Ultra-compact HII Regions Dana S. Balser D. Anish Roshi (Raman (Agnes Scott College) #12;Carbon RRLs Carbon Radio Recombination Lines (RRLs) NGC 2024 (Orion B) IC 1795 (W3) Palmer et al. (1967) #12;Carbon RRLs Photodissociation Regions (PDRs) Hollenbach & Tielens (1997

Balser, Dana S.

209

Would Border Carbon Adjustments prevent carbon leakage and heavy industry  

E-Print Network [OSTI]

No 52-2013 Would Border Carbon Adjustments prevent carbon leakage and heavy industry halshs-00870689,version1-7Oct2013 #12;Would Border Carbon Adjustments prevent carbon leakage and heavy The efficiency of unilateral climate policies may be hampered by carbon leakage and competitiveness losses

Paris-Sud XI, Université de

210

Cumulative Carbon and Just Allocation of the Global Carbon Commons  

E-Print Network [OSTI]

Cumulative Carbon and Just Allocation of the Global Carbon Commons R.T. Pierrehumbert1 on climate can be characterized by a single statistic, called Cumulative Carbon. This is the aggregate amount of carbon emitted in the form of carbon dioxide by activities such as fossil fuel burning and deforestation

Pierrehumbert, Raymond

211

Carbon Sequestration via Mineral Carbonation: Overview and Assessment  

E-Print Network [OSTI]

1 Carbon Sequestration via Mineral Carbonation: Overview and Assessment 14 March 2002 Howard Herzog overview and assessment of carbon sequestration by mineral carbonation (referred to as "mineral sequestration R&D. The first is that carbonates have a lower energy state than CO2. Therefore, at least

212

Gel and process for preventing carbon dioxide break through  

SciTech Connect (OSTI)

A process is described for retarding the flow of carbon dioxide in carbon dioxide break-through fingers in a subterranean formation, the process comprising: (a) introducing a gas selected from the group consisting of carbon dioxide and gases containing carbon dioxide into a subterranean deposit containing carbon dioxide break-through fingers; (b) after the carbon dioxide break-through fingers have sorbed a predetermined amount of the gas, stopping the flow of the gas into the subterranean formation, (c) after stopping the flow of the gas into the subterranean formation, introducing an effective amount of a gel-forming composition into the subterranean formation and into the carbon dioxide break-through fingers, the gel-forming composition being operable, when contacting carbon dioxide break-through fingers containing the brine which has absorbed substantial amounts of carbon dioxide to form a gel in the fingers which is operable for retarding the flow of the gas in the finger. The gel-forming composition comprises: i. an aqueous solution comprising a first substance selected from the group consisting of polyvinyl alcohols, polyvinyl alcohol copolymers, and mixtures thereof, and ii. an amount of a second substance selected from the group consisting of aldehydes, aldehyde generating substances, acetals, acetal generating substances, and mixtures thereof.

Sandiford, B.B.; Zillmer, R.C.

1987-06-16T23:59:59.000Z

213

Mesoporous carbon materials  

DOE Patents [OSTI]

The invention is directed to a method for fabricating a mesoporous carbon material, the method comprising subjecting a precursor composition to a curing step followed by a carbonization step, the precursor composition comprising: (i) a templating component comprised of a block copolymer, (ii) a phenolic compound or material, (iii) a crosslinkable aldehyde component, and (iv) at least 0.5 M concentration of a strong acid having a pKa of or less than -2, wherein said carbonization step comprises heating the precursor composition at a carbonizing temperature for sufficient time to convert the precursor composition to a mesoporous carbon material. The invention is also directed to a mesoporous carbon material having an improved thermal stability, preferably produced according to the above method.

Dai, Sheng; Wang, Xiqing

2013-08-20T23:59:59.000Z

214

Mesoporous carbon materials  

DOE Patents [OSTI]

The invention is directed to a method for fabricating a mesoporous carbon material, the method comprising subjecting a precursor composition to a curing step followed by a carbonization step, the precursor composition comprising: (i) a templating component comprised of a block copolymer, (ii) a phenolic compound or material, (iii) a crosslinkable aldehyde component, and (iv) at least 0.5 M concentration of a strong acid having a pKa of or less than -2, wherein said carbonization step comprises heating the precursor composition at a carbonizing temperature for sufficient time to convert the precursor composition to a mesoporous carbon material. The invention is also directed to a mesoporous carbon material having an improved thermal stability, preferably produced according to the above method.

Dai, Sheng (Knoxville, TN); Wang, Xiqing (Oak Ridge, TN)

2012-02-14T23:59:59.000Z

215

Carbon Nanotubes Potentialities in Directional Dark Matter Searches  

E-Print Network [OSTI]

We propose a new solution to the problem of dark matter directional detection based on large parallel arrays of carbon nanotubes. The phenomenon of ion channeling in single wall nanotubes is simulated to calculate the expected number of recoiling carbon ions, due to the hypothetical scattering with dark matter particles, subsequently being driven along their longitudinal extension. As shown by explicit calculation, the relative orientation of the carbon nanotube array with respect to the direction of motion of the Sun has an appreciable effect on the channeling probability of the struck ion and this provides the required detector anisotropic response.

L. M. Capparelli; G. Cavoto; D. Mazzilli; A. D. Polosa

2014-12-28T23:59:59.000Z

216

HF treatment effect for carbon deposition on silicon (111) by DC sputtering technique  

SciTech Connect (OSTI)

Surface modifications of Si (111) substrate by HF solution for thin film carbon deposition have been systematically studied. Thin film carbon on Si (111) has been deposited using DC Unbalanced Magnetron Sputtering with carbon pellet doped by 5% Fe as the target. EDAX characterization confirmed that the carbon fraction on Si substrate much higher by dipping a clean Si substrate by HF solution before sputtering process in comparison with carbon fraction on Si substrate just after conventional RCA. Moreover, SEM and AFM images show the uniform thin film carbon on Si with HF treatment, in contrast to the Si without HF solution treatment. These experimental results suggest that HF treatment of Si surface provide Si-H bonds on top Si surface that useful to enhance the carbon deposition during sputtering process. Furthermore, we investigate the thermal stability of thin film carbon on Si by thermal annealing process up to 900 °C. Atomic arrangements during annealing process were characterized by Raman spectroscopy. Raman spectra indicate that thin film carbon on Si is remaining unchanged until 600 °C and carbon atoms start to diffuse toward Si substrate after annealing at 900 °C.

Aji, A. S., E-mail: aji.ravazes70@gmail.com; Darma, Y., E-mail: aji.ravazes70@gmail.com [Quantum Semiconductor and Devices Lab., Physics of Material Electronics Research Division, Department of Physics, Institut Teknologi Bandung (Indonesia)

2014-03-24T23:59:59.000Z

217

DEVELOPMENT OF A CO2 SEQUESTRATION MODULE BY INTEGRATING MINERAL ACTIVATION AND AQUEOUS CARBONATION  

SciTech Connect (OSTI)

Mineral carbonation provides a potential option for the long-term storage of carbon dioxide. Serpentine has been chosen as the feedstock mineral, due to its abundance and availability. However, the relatively low reactivity of serpentine has warranted research into physical and chemical treatments that have been shown to greatly increase its reactivity. The use of sulfuric acid as an accelerating medium for the removal of magnesium from serpentine has recently been investigated. In addition to the challenges presented by the dissolution of serpentine, another challenge is the subsequent carbonation of the magnesium ions. A stable hydration sphere for the magnesium ion reduces the carbonation kinetics by obstructing the formation of the carbonation products. Accordingly, this research has evaluated the solubility of carbon dioxide in aqueous solution, the interaction between the dissociation products of carbon dioxide, and the carbonation potential of the magnesium ion.

George Alexander; M. Mercedes Maroto-Valer; Parvana Aksoy; Harold Schobert

2006-03-25T23:59:59.000Z

218

Reinforced Carbon Nanotubes.  

DOE Patents [OSTI]

The present invention relates generally to reinforced carbon nanotubes, and more particularly to reinforced carbon nanotubes having a plurality of microparticulate carbide or oxide materials formed substantially on the surface of such reinforced carbon nanotubes composite materials. In particular, the present invention provides reinforced carbon nanotubes (CNTs) having a plurality of boron carbide nanolumps formed substantially on a surface of the reinforced CNTs that provide a reinforcing effect on CNTs, enabling their use as effective reinforcing fillers for matrix materials to give high-strength composites. The present invention also provides methods for producing such carbide reinforced CNTs.

Ren, Zhifen (Newton, MA); Wen, Jian Guo (Newton, MA); Lao, Jing Y. (Chestnut Hill, MA); Li, Wenzhi (Brookline, MA)

2005-06-28T23:59:59.000Z

219

Carbon Fiber SMC  

Broader source: Energy.gov (indexed) [DOE]

110,000 ACC capital) in 2008 * 54,000 for 2009 Partners * Continental Structural Plastic (CSP), a Tier One supplier * Discounted compounding and molding * Zoltek, a carbon...

220

Activated Carbon Injection  

SciTech Connect (OSTI)

History of the Clean Air Act and how the injection of carbon into a coal power plant's flu smoke can reduce the amount of mercury in the smoke.

None

2014-07-16T23:59:59.000Z

Note: This page contains sample records for the topic "ada carbon solutions" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Activated Carbon Injection  

ScienceCinema (OSTI)

History of the Clean Air Act and how the injection of carbon into a coal power plant's flu smoke can reduce the amount of mercury in the smoke.

None

2014-07-22T23:59:59.000Z

222

EMBODIED CARBON TARIFFS Christoph Bhringer  

E-Print Network [OSTI]

EMBODIED CARBON TARIFFS Christoph Böhringer Jared C. Carbone Thomas F. Rutherford Revised: August 2013 Abstract Embodied carbon tariffs tax the direct and indirect carbon emissions embodied in trade -- an idea popularized by countries seeking to extend the reach of domestic carbon regu- lations. We

223

Fabrication of carbon-aerogel electrodes for use in phosphoric acid fuel cells  

E-Print Network [OSTI]

An experiment was done to determine the ability to fabricate carbon aerogel electrodes for use in a phosphoric acid fuel cell (PAFC). It was found that the use of a 25% solution of the surfactant Cetyltrimethylammonium ...

Tharp, Ronald S

2005-01-01T23:59:59.000Z

224

Reversing Climate Change: Using Carbon Technology to Offset Carbon Emissions  

E-Print Network [OSTI]

Reversing Climate Change: Using Carbon Technology to Offset Carbon Emissions Climate change is real not only emitting less greenhouse gas (GHG), but actually sources of negative carbon. We then present two

225

Carbon-Optimal and Carbon-Neutral Supply Chains  

E-Print Network [OSTI]

Y. Li, M. Daskin. 2009. Carbon Footprint and the ManagementJ. van Houtum. 2011. E?ect of carbon emission regulations onStreamlined Enterprise Carbon Footprinting. Environmental

Caro, F.; Corbett, C. J.; Tan, T.; Zuidwijk, R.

2011-01-01T23:59:59.000Z

226

A NOVEL APPROACH TO MINERAL CARBONATION: ENHANCING CARBONATION WHILE AVOIDING MINERAL PRETREATMENT PROCESS COST  

SciTech Connect (OSTI)

Known fossil fuel reserves, especially coal, can support global energy demands for centuries to come, if the environmental problems associated with CO{sub 2} emissions can be overcome. Unlike other CO{sub 2} sequestration candidate technologies that propose long-term storage, mineral sequestration provides permanent disposal by forming geologically stable mineral carbonates. Carbonation of the widely occurring mineral olivine (e.g., forsterite, Mg{sub 2}SiO{sub 4}) is a large-scale sequestration process candidate for regional implementation, which converts CO{sub 2} into the environmentally benign mineral magnesite (MgCO{sub 3}). The primary goal is cost-competitive process development. As the process is exothermic, it inherently offers low-cost potential. Enhancing carbonation reactivity is key to economic viability. Recent studies at the U.S. DOE Albany Research Center have established that aqueous-solution carbonation using supercritical CO{sub 2} is a promising process; even without olivine activation, 30-50% carbonation has been achieved in an hour. Mechanical activation (e.g., attrition) has accelerated the carbonation process to an industrial timescale (i.e., near completion in less than an hour), at reduced pressure and temperature. However, the activation cost is too high to be economical and lower cost pretreatment options are needed. Herein, we report our first year progress in exploring a novel approach that offers the potential to substantially enhance carbonation reactivity while bypassing pretreatment activation. We have discovered that robust silica-rich passivating layers form on the olivine surface during carbonation. As carbonation proceeds, these passivating layers thicken, fracture and eventually exfoliate, exposing fresh olivine surfaces during rapidly-stirred/circulating carbonation. We are exploring the mechanisms that govern carbonation reactivity and the impact that (1) modeling/controlling the slurry fluid-flow conditions, (2) varying the aqueous ion species/size and concentration (e.g., Li{sup +}, Na{sup +}, K{sup +}, Rb{sup +}, Cl{sup -}, HCO{sub 3}{sup -}), and (3) incorporating select sonication offer to enhance exfoliation and carbonation. Thus far, we have succeeded in nearly doubling the extent of carbonation observed compared with the optimum procedure previously developed by the Albany Research Center. Aqueous carbonation reactivity was found to be a strong function of the ionic species present and their aqueous activities, as well as the slurry fluid flow conditions incorporated. Synergistic control of these parameters offers the potential for further improvements in carbonation reactivity. A new sonication exfoliation system incorporating a novel sealing system was developed to carry out the sonication studies. Our initial studies that incorporate controlled sonication have not yet lead to a significant improvement in the extent of carbonation observed. Year 2 studies will emphasize those approaches that offer the greatest potential to cost effectively enhance carbonation, as well as combined approaches that may further enhance carbonation. Mechanistic investigations indicate incongruent dissolution results in the observed silica-rich passivating layer formation. Observations of magnesite nanocrystals within the passivating layers that form indicate the layers can exhibit significant permeability to the key reactants present (e.g., Mg{sup 2+}, H{sup +}, H{sub 2}O, CO{sub 2}, and HCO{sub 3} -). Atomistic modeling supports the observation of robust passivating layers that retain significant permeability to the key reaction species involved. Studies in Year 2 will emphasize the impact that controlled aqueous speciation and activity and slurry-flow dynamics have on the mechanisms that control carbonation reactivity and the potential they offer to substantially reduce olivine mineral sequestration process cost.

Michael J. McKelvy; Andrew V.G. Chizmeshya; Kyle Squires; Ray W. Carpenter; Hamadallah Bearat

2005-10-01T23:59:59.000Z

227

Direct template synthesis of mesoporous carbon and its application to supercapacitor electrodes  

SciTech Connect (OSTI)

A direct templating method which is facile, inexpensive and suitable for the large scale production of mesoporous carbon is reported herein. A meso-structure surfactant/silicate template was made in a solution phase and resorcinol-formaldehyde as a carbon precursor was incorporated into the template solution. After aging, carbonization and hydrofluoric acid (HF) etching, mesoporous carbon was obtained. Using X-ray diffraction, scanning and transmission electron microscopy and nitrogen sorption, the synthesis mechanism of the mesoporous carbon was elucidated. According to the small angle X-ray scattering measurements, the surface became smoother after the removal of the silica, indicating that the silica was mostly located at the pore surface of the carbon. Also, the calculation of the pore volume demonstrated that the silica was transferred into the pores of the carbon without structural collapse during HF etching. When the prepared mesoporous carbon was applied to a supercapacitor electrode, the rectangular shape of the cyclic voltammogram was less collapsed, even at a high scan rate, which is indicative of its high rate capability. This was due to the low resistance of the electrolyte in the pores (3.8 {Omega} cm{sup 2}), which was smaller than that of conventional activated carbon electrodes and even comparable to that of ordered mesoporous carbon electrodes. This improved performance was probably due to the well developed mesoporosity and high pore connectivity of the prepared mesoporous carbon.

Yoon, Songhun, E-mail: yoonshun@krict.re.kr [Advanced Chemical Technology Division, Korea Research Institute of Chemical Technology (KRICT), Sinseongno 19, Yuseong, Daejeon 305-600 (Korea, Republic of); Oh, Seung M. [Research Center for Energy Conversion and Storage (RCECS), School of Chemical and Biological Engineering and Institute of Chemical Process, College of Engineering, Seoul National University, Seoul 151-744 (Korea, Republic of); Lee, Chulwee [Advanced Chemical Technology Division, Korea Research Institute of Chemical Technology (KRICT), Sinseongno 19, Yuseong, Daejeon 305-600 (Korea, Republic of)

2009-08-05T23:59:59.000Z

228

Carbon-Optimal and Carbon-Neutral Supply Chains  

E-Print Network [OSTI]

Pearce, D. 2003. The Social Cost Of Carbon And Its PolicyR.S.J. 2008. The Social Cost of Carbon: Trends, Outliers and

Caro, F.; Corbett, C. J.; Tan, T.; Zuidwijk, R.

2011-01-01T23:59:59.000Z

229

Carbonation Mechanism of Reservoir Rock by Supercritical Carbon...  

Open Energy Info (EERE)

from reservoir rock formation. - Task 2: Carbonation study of minerals. - Task 3: Mechanical behaviors of carbonated minerals. - Task 4: Modeling of CO2- reservoir rock...

230

Carbon monoxide absorbing liquid  

SciTech Connect (OSTI)

The present disclosure is directed to a carbon monoxide absorbing liquid containing a cuprous ion, hydrochloric acid and titanum trichloride. Titanium trichloride is effective in increasing the carbon monoxide absorption quantity. Furthermore, titanium trichloride remarkably increases the oxygen resistance. Therefore, this absorbing liquid can be used continuously and for a long time.

Arikawa, Y.; Horigome, S.; Kanehori, K.; Katsumoto, M.

1981-07-07T23:59:59.000Z

231

Fly ash carbon passivation  

DOE Patents [OSTI]

A thermal method to passivate the carbon and/or other components in fly ash significantly decreases adsorption. The passivated carbon remains in the fly ash. Heating the fly ash to about 500 and 800 degrees C. under inert gas conditions sharply decreases the amount of surfactant adsorbed by the fly ash recovered after thermal treatment despite the fact that the carbon content remains in the fly ash. Using oxygen and inert gas mixtures, the present invention shows that a thermal treatment to about 500 degrees C. also sharply decreases the surfactant adsorption of the recovered fly ash even though most of the carbon remains intact. Also, thermal treatment to about 800 degrees C. under these same oxidative conditions shows a sharp decrease in surfactant adsorption of the recovered fly ash due to the fact that the carbon has been removed. This experiment simulates the various "carbon burnout" methods and is not a claim in this method. The present invention provides a thermal method of deactivating high carbon fly ash toward adsorption of AEAs while retaining the fly ash carbon. The fly ash can be used, for example, as a partial Portland cement replacement in air-entrained concrete, in conductive and other concretes, and for other applications.

La Count, Robert B; Baltrus, John P; Kern, Douglas G

2013-05-14T23:59:59.000Z

232

Electronic Properties of Carbon Nanotubes  

E-Print Network [OSTI]

P. Avouris, in Carbon Nanotubes M. S. Dresselhaus, P.Physics of Carbon Nanotubes S. V. Rotkin, S. Subramoney,Properties of Carbon Nanotubes Philip G. Collins 1 and

Collins, Philip G

2008-01-01T23:59:59.000Z

233

Carbon Park Environmental Impact Assessment  

E-Print Network [OSTI]

of offsetting the University's carbon footprint, promoting biodiversity and establishing easily maintained Carbon Park Environmental Impact Assessment A B.E.S.T. Project By, Adam Bond 2011 #12; Bishop's University Carbon Park

234

Electronic Properties of Carbon Nanotubes  

E-Print Network [OSTI]

P. Avouris, in Carbon Nanotubes M. S. Dresselhaus, P.in Applied Physics of Carbon Nanotubes S. V. Rotkin, S.Electronic Properties of Carbon Nanotubes Philip G. Collins

Collins, Philip G

2008-01-01T23:59:59.000Z

235

Fissile solution measurement apparatus  

DOE Patents [OSTI]

An apparatus for determining the content of a fissile material within a solution by detecting delayed fission neutrons emitted by the fissile material after it is temporarily irradiated by a neutron source. The apparatus comprises a container holding the solution and having a portion defining a neutron source cavity centrally disposed within the container. The neutron source cavity temporarily receives the neutron source. The container has portions defining a plurality of neutron detector ports that form an annular pattern and surround the neutron source cavity. A plurality of neutron detectors count delayed fission neutrons emitted by the fissile material. Each neutron detector is located in a separate one of the neutron detector ports.

Crane, T.W.; Collinsworth, P.R.

1984-06-11T23:59:59.000Z

236

Mechanics of hydrogen storage in carbon nanotubes Y.L. Chen a  

E-Print Network [OSTI]

Mechanics of hydrogen storage in carbon nanotubes Y.L. Chen a , B. Liu a,Ã?, J. Wu a , Y. Huang b 17 July 2008 Keywords: Hydrogen storage Carbon nanotube Continuum model Analytical solution Atomistic simulations a b s t r a c t A continuum mechanics model is established for hydrogen storage in single

Jiang, Hanqing

237

Influence of Electrolyte Composition on Liquid-Gated Carbon Nanotube and Graphene Transistors  

E-Print Network [OSTI]

Influence of Electrolyte Composition on Liquid-Gated Carbon Nanotube and Graphene Transistors Iddo-walled carbon nanotubes (SWNTs) and graphene can function as highly sensitive nanoscale (bio)sensors in solution. Here, we compare experimentally how SWNT and graphene transistors respond to changes in the composition

Dekker, Cees

238

Multifunctional nanocomposites of carbon nanotubes and nanoparticles formed via vacuum filtration  

DOE Patents [OSTI]

In one aspect, the present invention provides a method of forming a film of nanocomposites of carbon nanotubes (CNTs) and platinum (Pt) nanoparticles. In one embodiment, the method includes the steps of (a) providing a first solution that contains a plurality of CNTs, (b) providing a second solution that contains a plurality of Pt nanoparticles, (c) combining the first solution and the second solution to form a third solution, and (d) filtering the third solution through a nanoporous membrane using vacuum filtration to obtain a film of nanocomposites of CNTs and Pt nanoparticles.

Hersam, Mark C; Ostojic, Gordana; Liang, Yu Teng

2013-10-22T23:59:59.000Z

239

Pacific Northwest rangeland carbon sequestration.  

E-Print Network [OSTI]

??This paper models the supply curve of carbon sequestration on Pacific Northwest rangelands. Rangeland managers have the ability to sequester carbon in agricultural soils by… (more)

Wiggins, Seth T.

2012-01-01T23:59:59.000Z

240

CARBON SEQUESTRATION STRATEGIES FOR CALIFORNIA  

E-Print Network [OSTI]

GEOLOGIC CARBON SEQUESTRATION STRATEGIES FOR CALIFORNIA: REPORT TO THE LEGISLATURE Regional Carbon Sequestration Partnership (WESTCARB) studies that we used, including Cameron Downey

Note: This page contains sample records for the topic "ada carbon solutions" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Offshore Renewable Energy Solutions  

E-Print Network [OSTI]

power ­ to meet its target of achieving 15% of energy consumption from renewable sources by 2020. CefasOffshore Renewable Energy Solutions #12;Cefas: meeting complex requirements The Centre and maximise resource input on field and lab-based studies ­ saving you time and money.Recognised expertise

242

An oxygen reduction electrocatalyst based on carbon nanotubegraphene complexes  

E-Print Network [OSTI]

such as platinum or its alloys are routinely used in fuel cells because of their high activity. Carbon alloys) for the oxygen reduction reaction (ORR) in acidic media for proton-exchange membrane fuel cells1, and designing catalysts with both optimal activity and stability for ORR in acidic solutions all remain

Pennycook, Steve

243

Better Buildings Residential Program Solution Center Demonstration...  

Energy Savers [EERE]

Better Buildings Residential Program Solution Center Demonstration Better Buildings Residential Program Solution Center Demonstration Better Buildings Residential Program Solution...

244

Cumulative Carbon and Just Allocation of the Global Carbon Commons  

E-Print Network [OSTI]

Cumulative Carbon and Just Allocation of the Global Carbon Commons R.T. Pierrehumbert* Abstract statistic, called cumulative carbon. This statistic is the aggregate amount ofcarbon emitted in theform such activitiespersist.In thispaper the conceptis usedto addressthe question offair allocation of carbon emissions

Pierrehumbert, Raymond

245

International Conference on Carbon Nanotechnology: Potential and Challenges (Carbon 10)  

E-Print Network [OSTI]

International Conference on Carbon Nanotechnology: Potential and Challenges (Carbon 10) 15 - 17th Since the discovery of the carbon nanotube (CNT) about two decades ago, research related to its of Materials and Process Engineering Kanpur Chapter hosted the `International Conference on Carbon

Srivastava, Kumar Vaibhav

246

Trading Water for Carbon with Biological Carbon Sequestration  

E-Print Network [OSTI]

Trading Water for Carbon with Biological Carbon Sequestration Robert B. Jackson,1 * Esteban G. Farley,1 David C. le Maitre,5 Bruce A. McCarl,6 Brian C. Murray7 Carbon sequestration strategies plantations feature prominently among tools for carbon sequestration (1­8). Plantations typi- cally combine

Nacional de San Luis, Universidad

247

IMPACCT: Carbon Capture Technology  

SciTech Connect (OSTI)

IMPACCT Project: IMPACCT’s 15 projects seek to develop technologies for existing coal-fired power plants that will lower the cost of carbon capture. Short for “Innovative Materials and Processes for Advanced Carbon Capture Technologies,” the IMPACCT Project is geared toward minimizing the cost of removing carbon dioxide (CO2) from coal-fired power plant exhaust by developing materials and processes that have never before been considered for this application. Retrofitting coal-fired power plants to capture the CO2 they produce would enable greenhouse gas reductions without forcing these plants to close, shifting away from the inexpensive and abundant U.S. coal supply.

None

2012-01-01T23:59:59.000Z

248

advanced carbon-carbon composites: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

14 15 16 17 18 19 20 21 22 23 24 25 Next Page Last Page Topic Index 1 CARBON-CARBON COMPOSITE ALLCOMP Carbon-Carbon Composite Biology and Medicine Websites Summary: CARBON-CARBON...

249

Carbon nanotubes : synthesis, characterization, and applications  

E-Print Network [OSTI]

fibers, carbon nanotubes, and carbon capsule structures canand multi-walled nanotubes and carbon fiber, and occurs withMulti- walled carbon nanotubes”, Carbon, v.43, pp.2608-2617,

Deck, Christian Peter

2009-01-01T23:59:59.000Z

250

LANIER, BRYAN KEITH. Study in the Improvement in Strength and Stiffness Capacity of Steel Multi-sided Monopole Towers Utilizing Carbon Fiber Reinforced  

E-Print Network [OSTI]

Multi-sided Monopole Towers Utilizing Carbon Fiber Reinforced Polymers as a Retrofitting Mechanism a strengthening solution utilizing high-modulus carbon fiber polymers as a retrofitting mechanism for monopole the behavior and validates the effectiveness of carbon fiber in increasing the flexural capacity of existing

251

Enhancing Carbon Reactivity in Mercury Control in Lignite-Fired Systems  

SciTech Connect (OSTI)

This project was awarded through the U.S. Department of Energy (DOE) National Energy Technology Laboratory Program Solicitation DE-PS26-03NT41718-01. The Energy & Environmental Research Center (EERC) led a consortium-based effort to resolve mercury (Hg) control issues facing the lignite industry. The EERC team-the Electric Power Research Institute (EPRI); the URS Corporation; the Babcock & Wilcox Company; ADA-ES; Apogee; Basin Electric Power Cooperative; Otter Tail Power Company; Great River Energy; Texas Utilities; Montana-Dakota Utilities Co.; Minnkota Power Cooperative, Inc.; BNI Coal Ltd.; Dakota Westmoreland Corporation; the North American Coal Corporation; SaskPower; and the North Dakota Industrial Commission-demonstrated technologies that substantially enhanced the effectiveness of carbon sorbents to remove Hg from western fuel combustion gases and achieve a high level ({ge} 55% Hg removal) of cost-effective control. The results of this effort are applicable to virtually all utilities burning lignite and subbituminous coals in the United States and Canada. The enhancement processes were previously proven in pilot-scale and limited full-scale tests. Additional optimization testing continues on these enhancements. These four units included three lignite-fired units: Leland Olds Station Unit 1 (LOS1) and Stanton Station Unit 10 (SS10) near Stanton and Antelope Valley Station Unit 1 (AVS1) near Beulah and a subbituminous Powder River Basin (PRB)-fired unit: Stanton Station Unit 1 (SS1). This project was one of three conducted by the consortium under the DOE mercury program to systematically test Hg control technologies available for utilities burning lignite. The overall objective of the three projects was to field-test and verify options that may be applied cost-effectively by the lignite industry to reduce Hg emissions. The EERC, URS, and other team members tested sorbent injection technologies for plants equipped with electrostatic precipitators (ESPs) and spray dryer absorbers combined with fabric filters (SDAs-FFs). The work focused on technology commercialization by involving industry and emphasizing the communication of results to vendors and utilities throughout the project.

Chad Wocken; Michael Holmes; John Pavlish; Jeffrey Thompson; Katie Brandt; Brandon Pavlish; Dennis Laudal; Kevin Galbreath; Michelle Olderbak

2008-06-30T23:59:59.000Z

252

Extrasolar Carbon Planets  

E-Print Network [OSTI]

We suggest that some extrasolar planets planets and low-mass white dwarf planets are especially good candidate members of this new class of planets, but these objects could also conceivably form around stars like the Sun. This planet-formation pathway requires only a factor of two local enhancement of the protoplanetary disk's C/O ratio above solar, a condition that pileups of carbonaceous grains may create in ordinary protoplanetary disks. Hot, Neptune-mass carbon planets should show a significant paucity of water vapor in their spectra compared to hot planets with solar abundances. Cooler, less massive carbon planets may show hydrocarbon-rich spectra and tar-covered surfaces. The high sublimation temperatures of diamond, SiC, and other carbon compounds could protect these planets from carbon depletion at high temperatures.

Marc J. Kuchner; S. Seager

2005-05-02T23:59:59.000Z

253

Carbon Capture Pilots (Kentucky)  

Broader source: Energy.gov [DOE]

Support for the Carbon Management Research Group (CMRG), a public/private partnership consisting of most of the Commonwealth’s utilities, the Electric Power Research Institute, the Center for...

254

Activated carbon aerogels  

SciTech Connect (OSTI)

Activated carbon aerogels were obtained from the CO{sub 2} activation of the carbon aerogels. The adsorption isotherms of nitrogen on activated carbon aerogels at 77 K were measured and analyzed by the high-resolution {alpha}{sub s} plot to evaluate their porosities. The {alpha}{sub s} plot showed an upward deviation from linearity below {alpha}{sub s} = 0.5, suggesting that the presence of micropores becomes more predominant with the extent of the activation. Activation increased noticeably the pore volume and the surface area (the maximum value: 2600 m{sup 2}.g{sup -1}) without change of the basic network structure of primary particles. Activated carbon aerogels had a bimodal pore size distribution of uniform micropores and mesopores. 16 refs., 2 figs., 1 tab.

Hanzawa, Y.; Kaneko, K. [Chiba Univ. (Japan)] [Chiba Univ. (Japan); Pekala, R.W. [Lawrence Livermore National Lab., CA (United States)] [Lawrence Livermore National Lab., CA (United States); Dresselhaus, M.S. [Massachusetts Inst. of Technology, Cambridge, MA (United States)] [Massachusetts Inst. of Technology, Cambridge, MA (United States)

1996-12-25T23:59:59.000Z

255

Low Carbon Fuel Standards  

E-Print Network [OSTI]

S O N I A YE H Low Carbon Fuel Standards The most direct andalternative transportation fuels is to spur innovation withstandard for upstream fuel producers. hen it comes to energy

Sperling, Dan; Yeh, Sonia

2009-01-01T23:59:59.000Z

256

Regional Carbon Sequestration Partnerships  

Broader source: Energy.gov [DOE]

DOE has created a network of seven Regional Carbon Sequestration Partnerships (RCSPs) to help develop the technology, infrastructure, and regulations to implement large-scale CO2 storage (also...

257

Research Summary Carbon Additionality  

E-Print Network [OSTI]

of the quality assurance of emissions reduction and carbon sequestration activities, but remains a source of much/reporting additionality rules. Technological Application of specific technology. Term Abatement arises within a specified

258

4, 1367, 2007 Modelling carbon  

E-Print Network [OSTI]

BGD 4, 13­67, 2007 Modelling carbon overconsumption and extracellular POC formation M. Schartau et carbon overconsumption and the formation of extracellular particulate organic carbon M. Schartau1 , A Correspondence to: M. Schartau (markus.schartau@gkss.de) 13 #12;BGD 4, 13­67, 2007 Modelling carbon

Paris-Sud XI, Université de

259

Research Report Forests and carbon  

E-Print Network [OSTI]

, baseline, carbon, climate change mitigation, forestry, quality assurance, sequestration. FCRP013/FCResearch Report Forests and carbon: a review of additionality #12;#12;Forests and carbon: a review. ISBN 978-0-85538-816-4 Valatin, G. (2011). Forests and carbon: a review of additionality. Forestry

260

Carbon dioxide removal process  

DOE Patents [OSTI]

A process and apparatus for separating carbon dioxide from gas, especially natural gas, that also contains C.sub.3+ hydrocarbons. The invention uses two or three membrane separation steps, optionally in conjunction with cooling/condensation under pressure, to yield a lighter, sweeter product natural gas stream, and/or a carbon dioxide stream of reinjection quality and/or a natural gas liquids (NGL) stream.

Baker, Richard W.; Da Costa, Andre R.; Lokhandwala, Kaaeid A.

2003-11-18T23:59:59.000Z

Note: This page contains sample records for the topic "ada carbon solutions" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Lead carbonate scintillator materials  

DOE Patents [OSTI]

Improved radiation detectors containing lead carbonate or basic lead carbonate as the scintillator element are disclosed. Both of these scintillators have been found to provide a balance of good stopping power, high light yield and short decay constant that is superior to other known scintillator materials. The radiation detectors disclosed are favorably suited for use in general purpose detection and in medical uses. 3 figures.

Derenzo, S.E.; Moses, W.W.

1991-05-14T23:59:59.000Z

262

Black Carbon’s Properties and Role in the Environment: A Comprehensive Review  

E-Print Network [OSTI]

Keywords: soil carbon sequestration; carbon budget;of an energy efficient carbon sequestration mechanism, asin the later section on carbon sequestration. In atmospheric

Shrestha, Gyami

2010-01-01T23:59:59.000Z

263

Black Carbon’s Properties and Role in the Environment: A Comprehensive Review  

E-Print Network [OSTI]

H. Can reducing black carbon emissions counteract globalinventory of black carbon emissions. Atmos. Environ. 1993,commonly studied form of carbon emissions. Black carbon (BC)

Shrestha, Gyami

2010-01-01T23:59:59.000Z

264

Carbon based prosthetic devices  

SciTech Connect (OSTI)

This is the final report of a one-year, Laboratory Directed Research and Development (LDRD) project at the Los Alamos National Laboratory (LANL). The project objective was to evaluate the use of carbon/carbon-fiber-reinforced composites for use in endoprosthetic devices. The application of these materials for the metacarpophalangeal (MP) joints of the hand was investigated. Issues concerning mechanical properties, bone fixation, biocompatibility, and wear are discussed. A system consisting of fiber reinforced materials with a pyrolytic carbon matrix and diamond-like, carbon-coated wear surfaces was developed. Processes were developed for the chemical vapor infiltration (CVI) of pyrolytic carbon into porous fiber preforms with the ability to tailor the outer porosity of the device to provide a surface for bone in-growth. A method for coating diamond-like carbon (DLC) on the articulating surface by plasma-assisted chemical vapor deposition (CVD) was developed. Preliminary results on mechanical properties of the composite system are discussed and initial biocompatibility studies were performed.

Devlin, D.J.; Carroll, D.W.; Barbero, R.S.; Archuleta, T. [Los Alamos National Lab., NM (US); Klawitter, J.J.; Ogilvie, W.; Strzepa, P. [Ascension Orthopedics (US); Cook, S.D. [Tulane Univ., New Orleans, LA (US). School of Medicine

1998-12-31T23:59:59.000Z

265

Nanoporous carbon tunable resistor/transistor and methods of production thereof  

DOE Patents [OSTI]

In one embodiment, a tunable resistor/transistor includes a porous material that is electrically coupled between a source electrode and a drain electrode, wherein the porous material acts as an active channel, an electrolyte solution saturating the active channel, the electrolyte solution being adapted for altering an electrical resistance of the active channel based on an applied electrochemical potential, wherein the active channel comprises nanoporous carbon arranged in a three-dimensional structure. In another embodiment, a method for forming the tunable resistor/transistor includes forming a source electrode, forming a drain electrode, and forming a monolithic nanoporous carbon material that acts as an active channel and selectively couples the source electrode to the drain electrode electrically. In any embodiment, the electrolyte solution saturating the nanoporous carbon active channel is adapted for altering an electrical resistance of the nanoporous carbon active channel based on an applied electrochemical potential.

Biener, Juergen; Baumann, Theodore F; Dasgupta, Subho; Hahn, Horst

2014-04-22T23:59:59.000Z

266

Study of fire retardant behavior of carbon nanotube membranes and carbon nanofiber paper in carbon fiber  

E-Print Network [OSTI]

were incorporated onto the surface of epoxy carbon fiber composites, as proposed fire shieldsStudy of fire retardant behavior of carbon nanotube membranes and carbon nanofiber paper in carbon fiber reinforced epoxy composites Qiang Wu, Wei Zhu, Chuck Zhang *, Zhiyong Liang, Ben Wang Department

Das, Suman

267

Isotopic studies of Yucca Mountain soil fluids and carbonate pedogenesis  

SciTech Connect (OSTI)

Secondary carbonates occurring within the soils, faults, and subsurface fractures of Yucca Mountain contain some of the best available records of paleoclimate and palehydrology for the potential radioactive waste repository site. This article discusses conceptual and analytical advances being made with regard to the interpretation of stable isotope data from pedogenic carbonates, specifically related to the {sup 13}C content of soil CO{sub 2}, CaCO{sub 3}, precipitation mechanisms, and isotopic fractionations between parent fluids and precipitating carbonates. The {sup 13}C content of soil carbon dioxide from Yucca Mountain and vicinity shows most of the usual patterns expected in such contexts: Decreasing {sup 13}C content with depth decreasing {sup 13}C with altitude and reduced {sup 13}C during spring. These patterns exist within the domain of a noisy data set; soil and vegetational heterogeneities, weather, and other factors apparently contribute to isotopic variability in the system. Several soil calcification mechanisms appear to be important, involving characteristic physical and chemical environments and isotopic fractionations. When CO{sub 2} loss from thin soil solutions is an important driving factor, carbonates may contain excess heavy isotopes, compared to equilibrium precipitation with soil fluids. When root calcification serves as a proton generator for plant absorption of soil nutrients, heavy isotope deficiencies are likely. Successive cycles of dissolution and reprecipitation mix and redistribute pedogenic carbonates, and tend to isotopically homogenize and equilibrate pedogenic carbonates with soil fluids.

McConnaughey, T.A.; Whelan, J.F.; Wickland, K.P.; Moscati, R.J.

1994-12-31T23:59:59.000Z

268

Measurement of carbon capture efficiency and stored carbon leakage  

DOE Patents [OSTI]

Data representative of a measured carbon dioxide (CO.sub.2) concentration and of a measured oxygen (O.sub.2) concentration at a measurement location can be used to determine whether the measured carbon dioxide concentration at the measurement location is elevated relative to a baseline carbon dioxide concentration due to escape of carbon dioxide from a source associated with a carbon capture and storage process. Optionally, the data can be used to quantify a carbon dioxide concentration increase at the first location that is attributable to escape of carbon dioxide from the source and to calculate a rate of escape of carbon dioxide from the source by executing a model of gas-phase transport using at least the first carbon dioxide concentration increase. Related systems, methods, and articles of manufacture are also described.

Keeling, Ralph F.; Dubey, Manvendra K.

2013-01-29T23:59:59.000Z

269

Bearwall Energy Efficient Solutions  

E-Print Network [OSTI]

CATEE Conference November 20, 2014 ENERGY EFFICIENT SOLUTIONS ESL-KT-14-11-06 CATEE 2014: Clean Air Through Efficiency Conference, Dallas, Texas Nov. 18-20 Brief History of Bearwall… Who We Are: ? Manuel Sovero ? Luis Osorio Energy Conservation... Experience: ESL-KT-14-11-06 CATEE 2014: Clean Air Through Efficiency Conference, Dallas, Texas Nov. 18-20 Energy Programs… ESL-KT-14-11-06 CATEE 2014: Clean Air Through Efficiency Conference, Dallas, Texas Nov. 18-20 Bearwall Methodology… Introduction...

Sovero,M.

2014-01-01T23:59:59.000Z

270

Cyanide Solution | EMSL  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation Proposed Newcatalyst phases onOrganization FY 2012 FYCustomer-Comments SignCyanide Solution

271

Review: Greenhouse Solutions with Sustainable Energy  

E-Print Network [OSTI]

Solutions with Sustainable Energy By Mark DiesendorfSolutions with Sustainable Energy. Sydney, NSW: University

Hamilton-Smith, Elery

2009-01-01T23:59:59.000Z

272

Carbon Fuel Particles Used in Direct Carbon Conversion Fuel Cells  

DOE Patents [OSTI]

A system for preparing particulate carbon fuel and using the particulate carbon fuel in a fuel cell. Carbon particles are finely divided. The finely dividing carbon particles are introduced into the fuel cell. A gas containing oxygen is introduced into the fuel cell. The finely divided carbon particles are exposed to carbonate salts, or to molten NaOH or KOH or LiOH or mixtures of NaOH or KOH or LiOH, or to mixed hydroxides, or to alkali and alkaline earth nitrates.

Cooper, John F. (Oakland, CA); Cherepy, Nerine (Oakland, CA)

2008-10-21T23:59:59.000Z

273

Carbon fuel particles used in direct carbon conversion fuel cells  

DOE Patents [OSTI]

A system for preparing particulate carbon fuel and using the particulate carbon fuel in a fuel cell. Carbon particles are finely divided. The finely dividing carbon particles are introduced into the fuel cell. A gas containing oxygen is introduced into the fuel cell. The finely divided carbon particles are exposed to carbonate salts, or to molten NaOH or KOH or LiOH or mixtures of NaOH or KOH or LiOH, or to mixed hydroxides, or to alkali and alkaline earth nitrates.

Cooper, John F. (Oakland, CA); Cherepy, Nerine (Oakland, CA)

2011-08-16T23:59:59.000Z

274

Carbon fuel particles used in direct carbon conversion fuel cells  

DOE Patents [OSTI]

A system for preparing particulate carbon fuel and using the particulate carbon fuel in a fuel cell. Carbon particles are finely divided. The finely dividing carbon particles are introduced into the fuel cell. A gas containing oxygen is introduced into the fuel cell. The finely divided carbon particles are exposed to carbonate salts, or to molten NaOH or KOH or LiOH or mixtures of NaOH or KOH or LiOH, or to mixed hydroxides, or to alkali and alkaline earth nitrates.

Cooper, John F. (Oakland, CA); Cherepy, Nerine (Oakland, CA)

2012-01-24T23:59:59.000Z

275

Carbon fuel particles used in direct carbon conversion fuel cells  

DOE Patents [OSTI]

A system for preparing particulate carbon fuel and using the particulate carbon fuel in a fuel cell. Carbon particles are finely divided. The finely dividing carbon particles are introduced into the fuel cell. A gas containing oxygen is introduced into the fuel cell. The finely divided carbon particles are exposed to carbonate salts, or to molten NaOH or KOH or LiOH or mixtures of NaOH or KOH or LiOH, or to mixed hydroxides, or to alkali and alkaline earth nitrates.

Cooper, John F.; Cherepy, Nerine

2012-10-09T23:59:59.000Z

276

Study of phase transformation and crystal structure for 1D carbon-modified titania ribbons  

SciTech Connect (OSTI)

One-dimensional hydrogen titanate ribbons were successfully prepared with hydrothermal reaction in a highly basic solution. A series of one-dimensional carbon-modified TiO{sub 2} ribbons were prepared via calcination of the mixture of hydrogen titanate ribbons and sucrose solution under N{sub 2} flow at different temperatures. The phase transformation process of hydrogen titanate ribbons was investigated by in-situ X-ray diffraction at various temperatures. Besides, one-dimensional carbon-modified TiO{sub 2} ribbons calcined at different temperatures were characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, nitrogen adsorption isotherms, diffuse reflectance ultraviolet–visible spectroscopy, and so on. Carbon-modified TiO{sub 2} ribbons showed one-dimensional ribbon crystal structure and various crystal phases of TiO{sub 2}. After being modified with carbon, a layer of uniform carbon film was coated on the surface of TiO{sub 2} ribbons, which improved their adsorption capacity for methyl orange as a model organic pollutant. One-dimensional carbon-modified TiO{sub 2} ribbons also exhibited enhanced visible-light absorbance with the increase of calcination temperatures. - Highlights: • The synthesis of 1D carbon-modified TiO{sub 2} ribbons. • The phase transformation of 1D carbon-modified TiO{sub 2} ribbons. • 1D carbon-modified TiO{sub 2} exhibites enhanced visible-light absorbance.

Zhou, Lihui, E-mail: lhzhou@ecust.edu.cn; Zhang, Fang; Li, Jinxia

2014-02-15T23:59:59.000Z

277

ammonium carbonates: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

T300: C strength 4340 steel, carbon-carbon composite, and Carbon-Silicon Carbide composite were tested to examine materials. MATERIALS AND DESIRED DATA Carbon-Carbon...

278

a537 carbon steel: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

T300: C strength 4340 steel, carbon-carbon composite, and Carbon-Silicon Carbide composite were tested to examine materials. MATERIALS AND DESIRED DATA Carbon-Carbon...

279

americium carbonates: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

T300: C strength 4340 steel, carbon-carbon composite, and Carbon-Silicon Carbide composite were tested to examine materials. MATERIALS AND DESIRED DATA Carbon-Carbon...

280

affecting carbon tetrachloride: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

T300: C strength 4340 steel, carbon-carbon composite, and Carbon-Silicon Carbide composite were tested to examine materials. MATERIALS AND DESIRED DATA Carbon-Carbon...

Note: This page contains sample records for the topic "ada carbon solutions" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Electrochemical implications of defects in carbon nanotubes  

E-Print Network [OSTI]

in Hollow Carbon Nanotubes . . . . . . 4.3.2.1 IncreasingThe electrochemistry of carbon nanotubes. Journal of Thethe sidewalls of carbon nanotubes. Journal of the American

Hoefer, Mark

2012-01-01T23:59:59.000Z

282

A cell nanoinjector based on carbon nanotubes  

E-Print Network [OSTI]

based on carbon nanotubes Xing Chen *|| , Andras Kis †|| ,that uses carbon nanotubes to deliver cargo into cells. Astrength (2, 3), carbon nanotubes (CNTs) are ideal nanoscale

Chen, Xing; Kis, Andras; Zettl, Alex; Bertozzi, Carolyn R.

2008-01-01T23:59:59.000Z

283

Electron transport through single carbon nanotubes  

E-Print Network [OSTI]

through single carbon nanotubes G. Chai Apollo Technologies,aligned multi-wall carbon nanotubes (CNT). Embedding of CNTsuse of fiber coated carbon nanotubes makes the handling of

Chai, G

2008-01-01T23:59:59.000Z

284

Ultrafast Nonlinear Spectroscopy of Semiconducting Carbon Nanotubes  

E-Print Network [OSTI]

Exciton binding energies in carbon nanotubes from two-photonExciton binding energies in carbon nanotubes from two-photonoptical transition energies of carbon nanotubes: the role of

Graham, Matthew Werden

2010-01-01T23:59:59.000Z

285

Participatory Carbon Monitoring: Operational Guidance for National...  

Open Energy Info (EERE)

Participatory Carbon Monitoring: Operational Guidance for National REDD+ Carbon Accounting Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Participatory Carbon...

286

Carbon Trading Protocols for Geologic Sequestration  

E-Print Network [OSTI]

H. , 2005, IPCC: Carbon Capture and Storage: Technical05CH11231. INTRODUCTION Carbon capture and storage (CCS)Development Mechanism CCS: Carbon Capture and Storage C02e:

Hoversten, Shanna

2009-01-01T23:59:59.000Z

287

ASSESSMENT OF HOUSEHOLD CARBON FOOTPRINT REDUCTION POTENTIALS  

E-Print Network [OSTI]

of  American household carbon footprint. ” Ecological and  limitations) of carbon footprint estimates toward of the art in carbon footprint analyses for California, 

Masanet, Eric

2010-01-01T23:59:59.000Z

288

On carbon footprints and growing energy use  

E-Print Network [OSTI]

On carbon footprints and growing energy use Curtis M.reductions in the carbon footprint of a growing organizationhis own organization's carbon footprint and answers this

Oldenburg, C.M.

2012-01-01T23:59:59.000Z

289

Carbon Nanotubes: Bearing Stress Like Never Before  

E-Print Network [OSTI]

Hart, A.J. (2013). Carbon Nanotubes: Present and Futureproduction of carbon nanotubes, and can be used to producesynthesized properly, and carbon nanotubes are no exception.

Limaye, Aditya

2013-01-01T23:59:59.000Z

290

Electrochemical implications of defects in carbon nanotubes  

E-Print Network [OSTI]

parameters. Fullerenes, Nanotubes and Carbon Nanostructures,in Hollow Carbon Nanotubes . . . . . . 4.3.2.1 Increasingmigration in graphite and carbon nanotubes. Chemical Physics

Hoefer, Mark

2012-01-01T23:59:59.000Z

291

Carbon Nanotube and Graphene Nanoelectromechanical Systems  

E-Print Network [OSTI]

Carbon Nanotubes on the2.4 Static Deformation of Carbon Nanotubes . . . . . .3.2 Field Emission from Carbon Nanotubes: Electrostatics

Aleman, Benjamin Jose

2011-01-01T23:59:59.000Z

292

Defects and Disorder in Carbon Nanotubes  

E-Print Network [OSTI]

Perebeinos, V. (2008) Carbon Nanotubes 111 423. Bachilo, S.M. & Mceuen, P. L. (2008) Carbon Nanotubes 111 Biro, L. P. ,sectional structure of carbon nanotubes. Fullerenes '96.

Collins, Philip G

2010-01-01T23:59:59.000Z

293

Electron transport through single carbon nanotubes  

E-Print Network [OSTI]

transport through single carbon nanotubes G. Chai Apolloaligned multi-wall carbon nanotubes (CNT). Embedding of CNTsuse of fiber coated carbon nanotubes makes the handling of

Chai, G

2008-01-01T23:59:59.000Z

294

How Carbon Capture Works | Department of Energy  

Energy Savers [EERE]

past two decades. Carbon capture, utilization and storage (CCUS) -- also referred to as carbon capture, utilization and sequestration -- is a process that captures carbon dioxide...

295

Carbon nanotubes : synthesis, characterization, and applications  

E-Print Network [OSTI]

around Surface-Attached Carbon Nanotubes. Ind. Eng. Chem.the flexural rigidity of carbon nanotube ensembles. AppliedNanotechnology in Carbon Materials. Acta Metallurgica, 1997.

Deck, Christian Peter

2009-01-01T23:59:59.000Z

296

Distributed Energy Resources for Carbon Emissions Mitigation  

E-Print Network [OSTI]

Energy Resources for Carbon Emissions Mitigation RyanEnergy Resources for Carbon Emissions Mitigation Ryanand/or site-attributable carbon emissions at commercial and

Firestone, Ryan; Marnay, Chris

2008-01-01T23:59:59.000Z

297

Effect of composite microstructure on electrical and mechanical properties of poly(vinyl acetate) composites with carbon black and clay.  

E-Print Network [OSTI]

The electrical and mechanical behavior of carbon black filled poly(vinyl acetate) latex-based and solution-based polymer composites was examined. A set of experiments were performed to distinguish composites with a segregated network (emulsion...

Miriyala, Sethu M.

2009-05-15T23:59:59.000Z

298

Carbon-particle generator  

DOE Patents [OSTI]

A method and apparatus whereby small carbon particles are made by pyrolysis of a mixture of acetylene carried in argon. The mixture is injected through a nozzle into a heated tube. A small amount of air is added to the mixture. In order to prevent carbon build-up at the nozzle, the nozzle tip is externally cooled. The tube is also elongated sufficiently to assure efficient pyrolysis at the desired flow rates. A key feature of the method is that the acetylene and argon, for example, are premixed in a dilute ratio, and such mixture is injected while cool to minimize the agglomeration of the particles, which produces carbon particles with desired optical properties for use as a solar radiant heat absorber.

Hunt, A.J.

1982-09-29T23:59:59.000Z

299

ADVANCED FLUE GAS CONDITIONING AS A RETROFIT UPGRADE TO ENHANCE PM COLLECTION FROM COAL-FIRED ELECTRIC UTILITY BOILERS  

SciTech Connect (OSTI)

ADA Environmental Solutions (ADA-ES) has successfully completed a research and development program granted by the Department of Energy National Energy Technology Laboratory (NETL) to develop a family of non-toxic flue gas conditioning agents to provide utilities and industries with a cost-effective means of complying with environmental regulations on particulate emissions and opacity. An extensive laboratory screening of potential additives was completed followed by full-scale trials at four utility power plants. The developed cohesivity additives have been demonstrated on a 175 MW utility boiler that exhibited poor collection of unburned carbon in the electrostatic precipitator. With cohesivity conditioning, opacity spiking caused by rapping reentrainment was reduced and total particulate emissions were reduced by more than 30%. Ammonia conditioning was also successful in reducing reentrainment on the same unit. Conditioned fly ash from the process is expected to be suitable for dry or wet disposal and for concrete admixture.

C. Jean Bustard

2003-12-01T23:59:59.000Z

300

A Universal Model for Nanoporous Carbon Supercapacitors Applicable to Diverse Pore Regimes, Carbons, and Electrolyte  

SciTech Connect (OSTI)

Supercapacitors, commonly called electric double-layer capacitors (EDLCs), are emerging as a novel type of energy storage device with the potential to substitute batteries in applications requiring high power densities. In response to the latest experimental breakthrough in nanoporous carbon supercapacitors, we propose a heuristic theoretical model that takes pore curvature into account as a replacement for the EDLC model which is based on a traditional parallel-plate capacitor. When the pore size is in the mesopore regime (2-50 nm), counterions enter mesoporous carbons and approach the pore wall to form an electric double-cylinder capacitor (EDCC); in the micropore regime (< 2 nm), solvated/desolvated counterions line up along the pore axis to form an electric wire-in-cylinder capacitor (EWCC). In the macropore regime (> 50 nm) where pores are large enough so that the pore curvature is no longer significant, the EDCC model can be reduced naturally to the EDLC model. We present density functional theory calculations and detailed analyses of available experimental data in various pore regimes, showing the significant effects of pore curvature on the supercapacitor properties of nanoporous carbons. It is shown that the EDCC/EWCC model is universal to carbon supercapacitors with diverse carbon materials including activated carbons, template carbons, and novel carbide-derived carbons, and with diverse electrolytes including organic electrolytes such as tetraethylammonium tetrafluoroborate (TEABF4), tetraethylammonium methyl-sulfonate (TEAMS) in acetonitrile, aqueous H2SO4 and KOH electrolytes, and even ionic liquid electrolyte such as 1-ethyl-3-methylimmidazolium bis(trifluromethane-sulfonyl)imide (EMI-TFSI). The EDCC/EWCC model allows the supercapacitor properties to be correlated with pore size, specific surface area, Debye length, electrolyte concentration and dielectric constant, and solute ion size, and may lend a support for the systematic optimization of the properties of carbon supercapacitors via experiments. On the basis of the insight obtained from the new model, we also discuss the effects of the kinetic solvation/desolvation process, multimodal (versus unimodal) pore size distribution, and exohedral (versus endohedral) capacitors on the electrochemical properties of supercapacitors.

Sumpter, Bobby G [ORNL; Huang, Jingsong [ORNL; Meunier, Vincent [ORNL

2008-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "ada carbon solutions" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Formation of rare earth carbonates using supercritical carbon dioxide  

DOE Patents [OSTI]

The invention relates to a process for the rapid, high yield conversion of select rare earth oxides or hydroxides, to their corresponding carbonates by contact with supercritical carbon dioxide.

Fernando, Quintus (Tucson, AZ); Yanagihara, Naohisa (Zacopan, MX); Dyke, James T. (Santa Fe, NM); Vemulapalli, Krishna (Tuscon, AZ)

1991-09-03T23:59:59.000Z

302

Development of carbon-carbon composites from solvent extracted pitch  

SciTech Connect (OSTI)

There are several methods used to fabricate carbon-carbon composites. One used extensively in the fabrication of aerospace components such as rocket nozzles and reentry vehicle nosetips, as well as commercial components for furnace fixturing and glass manufacturing, is the densification of a woven preform with molten pitch, and the subsequent conversion of the pitch to graphite through heat treatment. Two types of pitch are used in this process; coal tar pitch and petroleum pitch. The objective of this program was to determine if a pitch produced by the direct extraction of coal could be used as a substitute for these pitches in the fabrication of carbon-carbon composites. The program involved comparing solvent extracted pitch with currently accepted pitches and rigidizing a carbon-carbon preform with solvent extracted pitch for comparison with carbon-carbon fabricated with currently available pitch.

NONE

1996-06-24T23:59:59.000Z

303

SoftTemplated Mesoporous CarbonCarbon Nanotube Composites for...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Mesoporous Carbon-Carbon Nanotube Composites for High Performance Lithium-ion Batteries Dr. B. K. Guo, Dr. X. Q. Wang, Dr. P. F. Fulvio , Dr. S. M. Mahurin, Dr. X.-G. Sun,...

304

Ultrahard carbon nanocomposite films  

SciTech Connect (OSTI)

Modest thermal annealing to 600 C of diamondlike amorphous-carbon (a-C) films grown at room temperature results in the formation of carbon nanocomposites with hardness similar to diamond. These nanocomposite films consist of nanometer-sized regions of high density a-C embedded in an a-C matrix with a reduced density of 5--10%. The authors report on the evolution of density and bonding topologies as a function of annealing temperature. Despite a decrease in density, film hardness actually increases {approximately} 15% due to the development of the nanocomposite structure.

SIEGAL,MICHAEL P.; TALLANT,DAVID R.; PROVENCIO,PAULA P.; OVERMYER,DONALD L.; SIMPSON,REGINA L.; MARTINEZ-MIRANDA,L.J.

2000-01-27T23:59:59.000Z

305

ADAS WORKSHOP 23-25 September 2012  

E-Print Network [OSTI]

-cation and atom-molecule reactive collisions in the cold regions of the fusion plasmas 20' F. Guzmán New molecular of the Institut de Recherche sur la Fusion Magnétique 08.50­08.55 Adjustments and ratification of the agenda. 1st 20' Discussion 10.30 Coffee #12;2nd session: Atomic physics and fusion plasma diagnostics 10

Strathclyde, University of

306

Ada, Minnesota: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of InspectorConcentrating SolarElectric Coop,SaveWhiskeyEnergyAd-Venta Jump to: navigation, search Logo:Adais a

307

Ada, Oklahoma: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of InspectorConcentrating SolarElectric Coop,SaveWhiskeyEnergyAd-Venta Jump to: navigation, search Logo:Adais

308

Ada, Ohio: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160 East 300 SouthWaterBrasil Jump to: navigation,Diagram Jump694969°, -83.8227148°

309

Structural response of oxidation resistant carbon-carbon composites  

E-Print Network [OSTI]

for the degree of MASTER OF SCIENCE Approved as to style and content by: zden O. Ochoa (Chair of Committee) Tho . o k (Member) Paul . Roschke (Member) J. A. Caton (Head of Department) December l996 Major Subject: Mechanical Engineering ABSTRACT... Structural Response of Oxidation Resistant Carbon-carbon Composites. (December 1996) Timothy Harold Ashley, B. S. , Texas ARM University Chair of Advisory Committee: Dr. Ozden O. Ochoa Since carbon-carbon composites maintain their strength at high...

Ashley, Timothy Harold

2012-06-07T23:59:59.000Z

310

Low Cost Carbon Fiber Production Carbon Fiber Manufacturing Cost Modeling  

E-Print Network [OSTI]

to bond with composite matrix material. It is important that a carbon fiber manufacturing cost model manufactured with carbon fiber as opposed to traditional materials such as steel, automotive parts are able associated with both the manufacture of carbon fibers themselves as well as their composites. Traditional

311

ANALYSIS OF THE REACTIVITY OF RADPRO SOLUTION WITH COTTON RAGS  

SciTech Connect (OSTI)

Rags containing RadPro{reg_sign} solution will be generated during the decontamination of the Plutonium Finishing Plant (PFP). Under normal conditions, the rags will be neutralized with sodium carbonate prior to placing in the drums. The concern with RadPro solutions and cotton rags is that some of the RadPro solutions contain nitric acid. Under the right conditions, nitric acid and cotton rags exothermically react. The concern is, will RadPro solutions react with cotton rags exothermically? The potential for a runaway reaction for any of the RadPro solutions used was studied in Section 5.2 of PNNL-15410, Thermal Stability Studies of Candidate Decontamination Agents for Hanford's Plutonium Finishing Plant Plutonium-Contaminated Gloveboxes. This report shows the thermal behavior of cotton rags having been saturated in one of the various neutralized and non-neutralized RadPro solutions. The thermal analysis was performed using thermogravimetric Analysis (TGA), Differential Thermal Analysis (DTA) and Accelerating Rate Calorimetry (ARC).

MARUSICH RM

2009-08-11T23:59:59.000Z

312

ISSUES IN EVALUATING CARBON SEQUESTRATION AND ATTRIBUTING CARBON CREDITS TO GRASSLAND RESTORATION EFFORTS  

E-Print Network [OSTI]

ISSUES IN EVALUATING CARBON SEQUESTRATION AND ATTRIBUTING CARBON CREDITS TO GRASSLAND RESTORATION examines biological carbon sequestration using a grassland restoration as a model system. Chapter 1 for biological carbon sequestration. In this analysis, we found that significantly greater soil carbon

Wisconsin at Madison, University of

313

Sodium to sodium carbonate conversion process  

DOE Patents [OSTI]

A method of converting radioactive alkali metal into a low level disposable solid waste material. The radioactive alkali metal is atomized and introduced into an aqueous caustic solution having caustic present in the range of from about 20 wt % to about 70 wt % to convert the radioactive alkali metal to a radioactive alkali metal hydroxide. The aqueous caustic containing radioactive alkali metal hydroxide and CO.sub.2 are introduced into a thin film evaporator with the CO.sub.2 present in an amount greater than required to convert the alkali metal hydroxide to a radioactive alkali metal carbonate, and thereafter the radioactive alkali metal carbonate is separated from the thin film evaporator as a dry powder. Hydroxide solutions containing toxic metal hydroxide including one or more metal ions of Sb, As, Ba, Be, Cd, Cr, Pb, Hg, Ni, Se, Ag and T1 can be converted into a low level non-hazardous waste using the thin film evaporator of the invention.

Herrmann, Steven D. (Idaho Falls, ID)

1997-01-01T23:59:59.000Z

314

Sodium to sodium carbonate conversion process  

DOE Patents [OSTI]

A method is described for converting radioactive alkali metal into a low level disposable solid waste material. The radioactive alkali metal is atomized and introduced into an aqueous caustic solution having caustic present in the range of from about 20 wt % to about 70 wt % to convert the radioactive alkali metal to a radioactive alkali metal hydroxide. The aqueous caustic containing radioactive alkali metal hydroxide and CO{sub 2} are introduced into a thin film evaporator with the CO{sub 2} present in an amount greater than required to convert the alkali metal hydroxide to a radioactive alkali metal carbonate, and thereafter the radioactive alkali metal carbonate is separated from the thin film evaporator as a dry powder. Hydroxide solutions containing toxic metal hydroxide including one or more metal ions of Sb, As, Ba, Be, Cd, Cr, Pb, Hg, Ni, Se, Ag and Tl can be converted into a low level non-hazardous waste using the thin film evaporator of the invention. 3 figs.

Herrmann, S.D.

1997-10-14T23:59:59.000Z

315

Theoretical Model for Nanoporous Carbon Supercapacitors  

SciTech Connect (OSTI)

The unprecedented anomalous increase in capacitance of nanoporous carbon supercapacitors at pore sizes smaller than 1 nm [Science 2006, 313, 1760.] challenges the long-held presumption that pores smaller than the size of solvated electrolyte ions do not contribute to energy storage. We propose a heuristic model to replace the commonly used model for an electric double-layer capacitor (EDLC) on the basis of an electric double-cylinder capacitor (EDCC) for mesopores (2 {50 nm pore size), which becomes an electric wire-in-cylinder capacitor (EWCC) for micropores (< 2 nm pore size). Our analysis of the available experimental data in the micropore regime is confirmed by 1st principles density functional theory calculations and reveals significant curvature effects for carbon capacitance. The EDCC (and/or EWCC) model allows the supercapacitor properties to be correlated with pore size, specific surface area, Debye length, electrolyte concentration and dielectric constant, and solute ion size. The new model not only explains the experimental data, but also offers a practical direction for the optimization of the properties of carbon supercapacitors through experiments.

Sumpter, Bobby G [ORNL; Meunier, Vincent [ORNL; Huang, Jingsong [ORNL

2008-01-01T23:59:59.000Z

316

Carbon nanotubes: synthesis and functionalization   

E-Print Network [OSTI]

conditions were then used as the basis of several comparative CVD experiments showing that the quality of nanotubes and the yield of carbon depended on the availability of carbon to react. The availability could be controlled by the varying concentration...

Andrews, Robert

2007-01-01T23:59:59.000Z

317

Irradiation Stability of Carbon Nanotubes  

E-Print Network [OSTI]

Ion irradiation of carbon nanotubes is a tool that can be used to achieve modification of the structure. Irradiation stability of carbon nanotubes was studied by ion and electron bombardment of the samples. Different ion species at various energies...

Aitkaliyeva, Assel

2010-01-14T23:59:59.000Z

318

Sensor applications of carbon nanotubes  

E-Print Network [OSTI]

A search of published research on sensing mechanisms of carbon nanotubes was performed to identify applications in which carbon nanotubes might improve on current sensor technologies, in either offering improved performance, ...

Rushfeldt, Scott I

2005-01-01T23:59:59.000Z

319

Carbon Footprint Calculator  

Broader source: Energy.gov [DOE]

This calculator estimates the amount of carbon emissions you and members of your household are responsible for. It does not include emissions associated with your work or getting to work if you commute by public transportation. It was developed by IEEE Spectrum magazine.

320

Carbon smackdown: wind warriors  

ScienceCinema (OSTI)

July 16. 2010 carbon smackdown summer lecture: learn how Berkeley Lab scientists are developing wind turbines to be used in an urban setting, as well as analyzing what it will take to increase the adoption of wind energy in the U.S.

Glen Dahlbacka of the Accelerator & Fusion Research Division and Ryan Wiser of the Environmental Energy Technologies Division are the speakers.

2010-09-01T23:59:59.000Z

Note: This page contains sample records for the topic "ada carbon solutions" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Carbon smackdown: wind warriors  

SciTech Connect (OSTI)

July 16. 2010 carbon smackdown summer lecture: learn how Berkeley Lab scientists are developing wind turbines to be used in an urban setting, as well as analyzing what it will take to increase the adoption of wind energy in the U.S.

Glen Dahlbacka of the Accelerator & Fusion Research Division and Ryan Wiser of the Environmental Energy Technologies Division are the speakers.

2010-07-21T23:59:59.000Z

322

CARBON DIOXIDE EMISSION REDUCTION  

E-Print Network [OSTI]

.5 Primary Energy Use and Carbon Dioxide Emissions for Selected US Chemical Subsectors in 1994 ...............................................................................................................16 Table 2.7 1999 Energy Consumption and Specific Energy Consumption (SEC) in the U.S. Cement Efficiency Technologies and Measures in Cement Industry.................22 Table 2.9 Energy Consumption

Delaware, University of

323

Carbon-Fuelled Future  

SciTech Connect (OSTI)

Whether due to changes in policy or consumption of available fossil fuels, alternative sources of energy will be required, especially given the rising global energy demand. However, one of the main factors limiting the widespread utilization of renewable energy, such as wind, solar, wave or geothermal, is our ability to store energy. Storage of energy from carbon-neutral sources, such as electricity from solar or wind, can be accomplished through many routes. One approach is to store energy in the form of chemical bonds, as fuels. The conversion of low-energy compounds, such as water and carbon dioxide, to higher energy molecules, such as hydrogen or carbon-based fuels, enables the storage of carbon-neutral energy on a very large scale. The author¹s work in this area is supported by the US Department of Energy Basic Energy Sciences, Division of Chemical Sciences, Geosciences & Biosciences. Pacific Northwest National Laboratory is operated by Battelle for the US Department of Energy.

Appel, Aaron M.

2014-09-12T23:59:59.000Z

324

Carbon smackdown: smart windows  

ScienceCinema (OSTI)

August 3, 2010 Berkeley Lab talk: In the fourth of five Carbon Smackdown matches, Berkeley Lab researchers Delia Milliron of the Materials Sciences Division and Stephen Selkowitz of the Environmental Energy Technologies Division talk about their work on energy-saving smart windows.

Delia Milliron

2010-09-01T23:59:59.000Z

325

14 April 2001 tmospheric carbon dioxide  

E-Print Network [OSTI]

emissions is through increased carbon sequestration into forests. In a large-scale assessment, Birdsey- ing carbon sequestration in southern forests. Carbon sequestration via southern pine forests may policy commitments. Keywords: carbon sequestration; southern pine forests ABSTRACT MEETING GLOBAL POLICY

Teskey, Robert O.

326

Nonlinear buckling analyses of a small-radius carbon nanotube  

SciTech Connect (OSTI)

Carbon nanotube (CNT) was first discovered by Sumio Iijima. It has aroused extensive attentions of scholars from all over the world. Over the past two decades, we have acquired a lot of methods to synthesize carbon nanotubes and learn their many incredible mechanical properties such as experimental methods, theoretical analyses, and computer simulations. However, the studies of experiments need lots of financial, material, and labor resources. The calculations will become difficult and time-consuming, and the calculations may be even beyond the realm of possibility when the scale of simulations is large, as for computer simulations. Therefore, it is necessary for us to explore a reasonable continuum model, which can be applied into nano-scale. This paper attempts to develop a mathematical model of a small-radius carbon nanotube based on continuum theory. An Isotropic circular cross-section, Timoshenko beam model is used as a simplified mechanical model for the small-radius carbon nanotube. Theoretical part is mainly based on modified couple stress theory to obtain the numerical solutions of buckling deformation. Meanwhile, the buckling behavior of the small radius carbon nanotube is simulated by Molecular Dynamics method. By comparing with the numerical results based on modified couple stress theory, the dependence of the small-radius carbon nanotube mechanical behaviors on its elasticity constants, small-size effect, geometric nonlinearity, and shear effect is further studied, and an estimation of the small-scale parameter of a CNT (5, 5) is obtained.

Liu, Ning, E-mail: liuxiao@ase.buaa.edu.cn; Li, Min; Jia, Jiao [School of Aeronautic Science and Engineering, Beihang University, Beijing 100091 (China); Wang, Yong-Gang [Department of Applied Mechanics, China Agricultural University, Beijing 100083 (China)

2014-04-21T23:59:59.000Z

327

1, 167193, 2004 Terrestrial carbon  

E-Print Network [OSTI]

BGD 1, 167­193, 2004 Terrestrial carbon budget at country-scale I. A. Janssens et al. Title Page Biogeosciences Discussions is the access reviewed discussion forum of Biogeosciences The carbon budget.janssens@ua.ac.be) 167 #12;BGD 1, 167­193, 2004 Terrestrial carbon budget at country-scale I. A. Janssens et al. Title

Paris-Sud XI, Université de

328

Carbon Nanotubes for Data Processing  

E-Print Network [OSTI]

Carbon Nanotubes for Data Processing Joerg Appenzeller, T. J. Watson Research Center, IBM Research.2 Electronic Structure of Graphene 4 2.3 Electronic Structure of Carbon Nanotubes 4 2.4 Transport Properties 6 2.5 Contacts 9 3 Synthesis of Carbon Nanotubes 10 3.1 Synthetic Methods 10 3.2 Growth Mechanisms 12

Joselevich, Ernesto

329

Dispersion toughened silicon carbon ceramics  

DOE Patents [OSTI]

Fracture resistant silicon carbide ceramics are provided by incorporating therein a particulate dispersoid selected from the group consisting of (a) a mixture of boron, carbon and tungsten, (b) a mixture of boron, carbon and molybdenum, (c) a mixture of boron, carbon and titanium carbide, (d) a mixture of aluminum oxide and zirconium oxide, and (e) boron nitride. 4 figures.

Wei, G.C.

1984-01-01T23:59:59.000Z

330

CARBON NANOTUBE TRANSISTORS: AN EVALUATION  

E-Print Network [OSTI]

CARBON NANOTUBE TRANSISTORS: AN EVALUATION L.C. Castro, D.L. John, and D.L. Pulfrey Department A simple, non-equilibrium model is used to evaluate the likely DC performance of carbon nanotube field and transcon- ductance close to the low-quantum-capacitance limit. Keywords: Carbon nanotubes, field

Pulfrey, David L.

331

4, 99123, 2007 Amazon carbon  

E-Print Network [OSTI]

, suggested much larger estimates for tropical forest carbon sequestration in the Ama- zon BasinBGD 4, 99­123, 2007 Amazon carbon balanc J. Lloyd et al. Title Page Abstract Introduction Discussions is the access reviewed discussion forum of Biogeosciences An airborne regional carbon balance

Boyer, Edmond

332

PIA - Savannah River Nuclear Solutions Electronic Safeguards...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Solutions Electronic Safeguards Security System (E3S) PIA - Savannah River Nuclear Solutions Electronic Safeguards Security System (E3S) PIA - Savannah River Nuclear Solutions...

333

Project Profile: Direct Supercritical Carbon Dioxide Receiver...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Carbon Dioxide Receiver Development Project Profile: Direct Supercritical Carbon Dioxide Receiver Development National Renewable Energy Laboratory logo The National...

334

SWITCHABLE POLARITY SOLVENTS AS DRAW SOLUTES FOR FORWARD OSMOSIS  

SciTech Connect (OSTI)

Switchable polarity solvents (SPS), mixtures of carbon dioxide, water, and tertiary amines, are presented as viable forward osmosis (FO) draw solutes allowing a novel SPS FO process. In this study substantial osmotic strengths of SPS are measured with freezing point osmometry and were demonstrated to induce competitive ?uxes at high salt concentrations on a laboratory-scale FO unit utilizing a ?at sheet cellulose triacetate (CTA) membrane. Under the experimental conditions the SPS degrades the CTA membrane; however experiments with polyamide reverse osmosis (RO) membranes display stability towards SPS. Once the draw is diluted the major fraction of the switchable polarity solvent can be mechanically separated from the puri?ed water after polar to nonpolar phase shift induced by introduction of 1 atm carbon dioxide to 1 atm of air or nitrogen with mild heating. Trace amounts of SPS can be removed from the separated water with RO in a process that avoids solution concentration polarization. The separated nonpolar phase can be regenerated to a full strength draw and recycled with the re-addition of 1 atm of carbon dioxide.

Frederick F. Stewart; Mark L. Stone; Aaron D. Wilson; Cathy Rae

2013-03-01T23:59:59.000Z

335

*** How PAN based Carbon Fibers are  

E-Print Network [OSTI]

*** How PAN based Carbon Fibers are Manufactured *** How Carbon Fiber Material Properties are Achieved *** Carbon Fiber Markets/Applications CarbonFiber AerospaceEngineeringGuestLecture: Friday as a Business Development Manager for Amoco's carbon fiber business unit (manufacturers of T-300 carbon fiber

Hu, Hui

336

6, 34193463, 2006 Black carbon or  

E-Print Network [OSTI]

ACPD 6, 3419­3463, 2006 Black carbon or brown carbon M. O. Andreae and A. Gelencs´er Title Page Chemistry and Physics Discussions Black carbon or brown carbon? The nature of light-absorbing carbonaceous;ACPD 6, 3419­3463, 2006 Black carbon or brown carbon M. O. Andreae and A. Gelencs´er Title Page

Paris-Sud XI, Université de

337

CALCULATING THE CARBON FOOTPRINT SUPPLY CHAIN FOR  

E-Print Network [OSTI]

CALCULATING THE CARBON FOOTPRINT SUPPLY CHAIN FOR THE SEMICONDUCTOR INDUSTRY By: Yasser Dessouky #12;Carbon Footprint Supply Chain Carbon Trust defines carbon footprint of a supply chain as follows: "The carbon footprint of a product is the carbon dioxide emitted across the supply chain for a single

Su, Xiao

338

Desalination with carbon aerogel electrodes. Revision 1  

SciTech Connect (OSTI)

Electrically regenerated electrosorption process (carbon aerogel CDI) was developed by LLNL for continuously removing ionic impurities from aqueous streams. A salt solution flows in a channel formed by numerous pairs of parallel carbon aerogel electrodes. Each electrode has a very high BET surface area (2-5.4x10{sup 6}ft{sup 2}lb{sup -1} or 400-1100 m{sup 2}g{sup -1}) and very low electrical resistivity ({le}40 m{Omega}). Ions are removed from the electrolyte by the electric field and electrosorbed onto the carbon aerogel. It is concluded that carbon aerogel CDI may be an energy-efficient alternative to electrodialysis and reverse osmosis for desalination of brackish water ({le}5000 ppM). The intrinsic energy required by this process is about QV/2, where Q is the stored electrical charge and V is the voltage between the electrodes, plus losses. Estimated requirement for desalination of a 2000 ppM feed is -0.53-2.5 Wh/gal{sup -1} (0.5-2.4 kJ L{sup -1}), depending on voltage, flow rate, cell dimensions, aerogel density, recovery ratio, etc. This assumes that 50-70% of the stored electrical energy is reclaimed during regeneration (electrical discharge). Though the energy requirement for desalination of sea water is also low, this application will be much more difficult. Additional work will be required for desalination of streams that contain more than 5000 ppM total dissolved solids (2000 ppM will require electrochemical cells with extremely tight, demanding tolerances). At this present time, the process is best suited for streams with dilute impurities, as recently demonstrated during a field test at LLNL Treatment Facility C.

Farmer, J.C.; Richardson, J.H.; Fix, D.V. [Lawrence Livermore National Lab., CA (United States); Thomson, S.L.; May, S.C. [Bechtel National, Inc., San Francisco, CA (United States)

1996-12-04T23:59:59.000Z

339

Carbon/lambda-MnO{sub 2} composites for supercapacitor electrodes  

SciTech Connect (OSTI)

In the present work a composite of carbon with lambda-MnO{sub 2} have been synthesized by a simple two-step route. In the first step, to obtain LiMn{sub 2}O{sub 4}/carbon material, mesoporous activated carbon was impregnated with the solution of precursor metal salts and heated subsequently. As-prepared materials were acid treated which resulted in the formation of lambda-MnO{sub 2}/carbon. Physical properties, structure and specific surface area of electrode materials were studied by TEM, X-ray diffraction and nitrogen sorption measurements. Voltammetry cycling, galvanostatic charge/discharge and impedance spectroscopy measurements performed in two- and three-electrode cells have been applied in order to measure electrochemical parameters. TEM images confirmed well dispersed lambda-MnO{sub 2} particles on the surface of carbon material. The carbon in the composite plays an important role as the surface area enhancing component and a support of pseudocapacitive material. Furthermore, the through-connected porosity serves as a continuous pathway for electrolyte transport. A synergetic effect of the porous carbon framework and of the redox properties of the lambda-MnO{sub 2} is at the origin of improvement of specific capacitance values which has been observed for composites after delithiation. - Comparison of capacitance characteristics for initial carbon and synthesised composites for CB in 1 mol L{sup -1} Na{sub 2}SO{sub 4} solution.

Malak-Polaczyk, A., E-mail: agnieszka-malak@wp.p [Institute of Chemistry and Technical Electrochemistry, Poznan University of Technology, Piotrowo 3, 60-695 Poznan (Poland); Institut de Sciences des Materiaux de Mulhouse, CNRS LRC 7228, 15 Rue Starcky, 68057 Mulhouse (France); Matei-Ghimbeu, C.; Vix-Guterl, C. [Institut de Sciences des Materiaux de Mulhouse, CNRS LRC 7228, 15 Rue Starcky, 68057 Mulhouse (France); Frackowiak, E. [Institute of Chemistry and Technical Electrochemistry, Poznan University of Technology, Piotrowo 3, 60-695 Poznan (Poland)

2010-04-15T23:59:59.000Z

340

NSTAR (Electric)- Business Solutions Program  

Broader source: Energy.gov [DOE]

The Business Solutions Program offers NSTAR's non-residential customers incentives for a variety of energy efficient retrofit and new construction projects. Prescriptive rebates are available for...

Note: This page contains sample records for the topic "ada carbon solutions" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Is Nuclear Energy the Solution?  

E-Print Network [OSTI]

009-0270-y Is Nuclear Energy the Solution? Milton H. Saier &in the last 50 years, nuclear energy subsidies have totaledadministration, the Global Nuclear Energy Partnership (GNEP)

Saier, Milton H.; Trevors, Jack T.

2010-01-01T23:59:59.000Z

342

Enhanced safeguards via solution monitoring  

SciTech Connect (OSTI)

Solution monitoring is defined as the essentially continuous monitoring of solution level, density, and temperature in all tanks in the process that contain, or could contain, safeguards-significant quantities of nuclear material. This report describes some of the enhancements that solution monitoring could make to international safeguards. The focus is on the quantifiable benefits of solution monitoring, but qualitatively, solution monitoring can be viewed as a form of surveillance. Quantitatively, solution monitoring can in some cases improve diversion detection probability. For example, the authors show that under certain assumptions, solution monitoring can be used to reduce the standard deviation of the annual material balance, {sigma}{sub MB}, from approximately 17 kg to approximately 4 kg. Such reduction in {sigma}{sub MB} will not always be possible, as they discuss. However, in all cases, solution monitoring would provide assurance that the measurement error models are adequate so that one has confidence in his estimate of {sigma}{sub MB}. Some of the results in this report were generated using data that were simulated with prototype solution monitoring software that they are developing. An accompanying document describes that software.

Burr, T.; Wangen, L.

1996-09-01T23:59:59.000Z

343

Carbon Capture and Storage, 2008  

SciTech Connect (OSTI)

The U.S. Department of Energy is researching the safe implementation of a technology called carbon sequestration, also known as carbon capture and storage, or CCS. Based on an oilfield practice, this approach stores carbon dioxide, or CO2 generated from human activities for millennia as a means to mitigate global climate change. In 2003, the Department of Energys National Energy Technology Laboratory formed seven Regional Carbon Sequestration Partnerships to assess geologic formations suitable for storage and to determine the best approaches to implement carbon sequestration in each region. This video describes the work of these partnerships.

2009-03-19T23:59:59.000Z

344

Carbon Capture and Storage, 2008  

ScienceCinema (OSTI)

The U.S. Department of Energy is researching the safe implementation of a technology called carbon sequestration, also known as carbon capture and storage, or CCS. Based on an oilfield practice, this approach stores carbon dioxide, or CO2 generated from human activities for millennia as a means to mitigate global climate change. In 2003, the Department of Energys National Energy Technology Laboratory formed seven Regional Carbon Sequestration Partnerships to assess geologic formations suitable for storage and to determine the best approaches to implement carbon sequestration in each region. This video describes the work of these partnerships.

None

2010-01-08T23:59:59.000Z

345

High conductivity electrolyte solutions and rechargeable cells incorporating such solutions  

DOE Patents [OSTI]

This invention relates generally to electrolyte solvents for use in liquid or rubbery polymer electrolyte solutions as are used, for example, in electrochemical devices. More specifically, this invention relates to sulfonyl/phospho-compound electrolyte solvents and sulfonyl/phospho-compound electrolyte solutions incorporating such solvents. 9 figs.

Angell, C.A.; Zhang, S.S.; Xu, K.

1998-10-20T23:59:59.000Z

346

"Clean solutions; in research and in education."  

E-Print Network [OSTI]

of flexibility Carbon-Fiber Composites A project in our lab has resulted in the development of a carbon-fiber information please view the video from the carbon fiber jet engine plant recently opened on the Isle of Wight; multifunctional heat-pipes; manufacturing of complex carbon composite objects and improvement of STEM education

Acton, Scott

347

Lithium Ion Battery Performance of Silicon Nanowires With Carbon Skin  

SciTech Connect (OSTI)

Silicon (Si) nanomaterials have emerged as a leading candidate for next generation lithium-ion battery anodes. However, the low electrical conductivity of Si requires the use of conductive additives in the anode film. Here we report a solution-based synthesis of Si nanowires with a conductive carbon skin. Without any conductive additive, the Si nanowire electrodes exhibited capacities of over 2000 mA h g-1 for 100 cycles when cycled at C/10 and over 1200 mA h g-1 when cycled more rapidly at 1C against Li metal.. In situ transmission electron microscopy (TEM) observation reveals that the carbon skin performs dual roles: it speeds lithiation of the Si nanowires significantly, while also constraining the final volume expansion. The present work sheds light on ways to optimize lithium battery performance by smartly tailoring the nanostructure of composition of materials based on silicon and carbon.

Bogart, Timothy D.; Oka, Daichi; Lu, Xiaotang; Gu, Meng; Wang, Chong M.; Korgel, Brian A.

2013-12-06T23:59:59.000Z

348

EB2012-MS-43 ADVANCES IN THE MODELLING OF CARBON/CARBON  

E-Print Network [OSTI]

, the Carbon-Carbon composites (C/C) are materials frequently used in industrial applications such as planeEB2012-MS-43 ADVANCES IN THE MODELLING OF CARBON/CARBON COMPOSITE UNDER TRIBOLOGICAL CONSTRAINTS 1, homogenization, carbon ABSTRACT Thermo mechanical properties of Carbon-Carbon composite (C/C) allow them

Paris-Sud XI, Université de

349

Electrochimica Acta 52 (2007) 39653975 Elucidating differences between carbon paper and carbon  

E-Print Network [OSTI]

of them are carbon-fiber-based porous materials: carbon paper is non-woven, while carbon cloth is wovenElectrochimica Acta 52 (2007) 3965­3975 Elucidating differences between carbon paper and carbon the performance differences between carbon paper (CP) and carbon cloth (CC). Three-dimensional simulations, based

350

Carbon Cycle Discussion After the warm-up quiz, discuss the carbon cycle.  

E-Print Network [OSTI]

Carbon Cycle Discussion After the warm-up quiz, discuss the carbon cycle. Carbon is one is without carbon. Where else is carbon on our Earth? In rocks, living organisms, the atmosphere, oceans Does carbon stay in one place? What processes include moving carbon? Introduce residence time: How long does

Carrington, Emily

351

Exact solutions in a model of vertical gas migration  

SciTech Connect (OSTI)

This work is motivated by the growing interest in injectingcarbon dioxide into deep geological formations as a means of avoidingatmospheric emissions of carbon dioxide and consequent global warming.One of the key questions regarding the feasibility of this technology isthe potential rate of leakage out of the primary storage formation. Weseek exact solutions in a model of gas flow driven by a combination ofbuoyancy, viscous and capillary forces. Different combinations of theseforces and characteristic length scales of the processes lead todifferent time scaling and different types of solutions. In the case of athin, tight seal, where the impact of gravity is negligible relative tocapillary and viscous forces, a Ryzhik-type solution implies square-rootof time scaling of plume propagation velocity. In the general case, a gasplume has two stable zones, which can be described by travelling-wavesolutions. The theoretical maximum of the velocity of plume migrationprovides a conservative estimate for the time of vertical migration.Although the top of the plume has low gas saturation, it propagates witha velocity close to the theoretical maximum. The bottom of the plumeflows significantly more slowly at a higher gas saturation. Due to localheterogeneities, the plume can break into parts. Individual plumes alsocan coalesce and from larger plumes. The analytical results are appliedto studying carbon dioxide flow caused by leaks from deep geologicalformations used for CO2 storage. The results are also applicable formodeling flow of natural gas leaking from seasonal gas storage, or formodeling of secondary hydrocarbon migration.

Silin, Dmitriy B.; Patzek, Tad W.; Benson, Sally M.

2006-06-27T23:59:59.000Z

352

Better Buildings Residential Program Solution Center Demonstration...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Program Solution Center Demonstration Webinar Transcript Better Buildings Residential Program Solution Center Demonstration Webinar Transcript The Better Buildings Residential...

353

Conference Agenda: Residential Energy Efficiency Solutions 2012...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Conference Agenda: Residential Energy Efficiency Solutions 2012 Conference Agenda: Residential Energy Efficiency Solutions 2012 Presents conference agenda including a general...

354

Presentation: Better Buildings Residential Program Solution Center...  

Energy Savers [EERE]

Presentation: Better Buildings Residential Program Solution Center Presentation: Better Buildings Residential Program Solution Center Presentation: Better Buildings Residential...

355

Better Buildings Residential Program Solution Center Demonstration...  

Energy Savers [EERE]

Better Buildings Residential Program Solution Center Demonstration Webinar Better Buildings Residential Program Solution Center Demonstration Webinar Demonstration webinar slides...

356

CARBON DIOXIDE FIXATION.  

SciTech Connect (OSTI)

Solar carbon dioxide fixation offers the possibility of a renewable source of chemicals and fuels in the future. Its realization rests on future advances in the efficiency of solar energy collection and development of suitable catalysts for CO{sub 2} conversion. Recent achievements in the efficiency of solar energy conversion and in catalysis suggest that this approach holds a great deal of promise for contributing to future needs for fuels and chemicals.

FUJITA,E.

2000-01-12T23:59:59.000Z

357

Dissolution of Irradiated Commercial UO2 Fuels in Ammonium Carbonate and Hydrogen Peroxide  

SciTech Connect (OSTI)

We propose and test a disposition path for irradiated nuclear fuel using ammonium carbonate and hydrogen peroxide media. We demonstrate on a 13 g scale that >98% of the irradiated fuel dissolves. Subsequent expulsion of carbonate from the dissolver solution precipitates >95% of the plutonium, americium, curium, and substantial amounts of fission products, effectively partitioning the fuel at the dissolution step. Uranium can be easily recovered from solution by any of several means, such as ion exchange, solvent extraction, or direct precipitation. Ammonium carbonate can be evaporated from solution and recovered for re-use, leaving an extremely compact volume of fission products, transactinides, and uranium. Stack emissions are predicted to be less toxic, less radioactive, chemically simpler, and simpler to treat than those from the conventional PUREX process.

Soderquist, Chuck Z.; Johnsen, Amanda M.; McNamara, Bruce K.; Hanson, Brady D.; Chenault, Jeffrey W.; Carson, Katharine J.; Peper, Shane M.

2011-01-18T23:59:59.000Z

358

Carbon taxes and India  

SciTech Connect (OSTI)

Using the Indian module of the Second Generation Model 9SGM, we explore a reference case and three scenarios in which greenhouse gas emissions were controlled. Two alternative policy instruments (carbon taxes and tradable permits) were analyzed to determine comparative costs of stabilizing emissions at (1) 1990 levels (the 1 X case), (2) two times the 1990 levels (the 2X case), and (3) three times the 1990 levels (the 3X case). The analysis takes into account India`s rapidly growing population and the abundance of coal and biomass relative to other fuels. We also explore the impacts of a global tradable permits market to stabilize global carbon emissions on the Indian economy under the following two emissions allowance allocation methods: (1) {open_quotes}Grandfathered emissions{close_quotes}: emissions allowances are allocated based on 1990 emissions. (2) {open_quotes}Equal per capita emissions{close_quotes}: emissions allowances are allocated based on share of global population. Tradable permits represent a lower cost method to stabilize Indian emissions than carbon taxes, i.e., global action would benefit India more than independent actions.

Fisher-Vanden, K.A.; Pitcher, H.M.; Edmonds, J.A.; Kim, S.H. [Pacific Northwest Lab., Richland, WA (United States); Shukla, P.R. [Indian Institute of Management, Ahmedabad (India)

1994-07-01T23:59:59.000Z

359

Aerogel and xerogel composites for use as carbon anodes  

DOE Patents [OSTI]

A method for forming a reinforced rigid anode monolith and fuel and product of such method. The method includes providing a solution of organic aerogel or xerogel precursors including at least one of a phenolic resin, phenol (hydroxybenzene), resorcinol(1,3-dihydroxybenzene), or catechol(1,2-dihydroxybenzene); at least one aldehyde compound selected from the group consisting of formaldehyde, acetaldehyde, and furfuraldehyde; and an alkali carbonate or phosphoric acid catalyst; adding internal reinforcement materials comprising carbon to said precursor solution to form a precursor mixture; gelling said precursor mixture to form a composite gel; drying said composite gel; and pyrolyzing said composite gel to form a wettable aerogel/carbon composite or a wettable xerogel/carbon composite, wherein said composites comprise chars and said internal reinforcement materials, and wherein said composite is suitable for use as an anode with the chars being fuel capable of being combusted in a molten salt electrochemical fuel cell in the range from 500 C to 800 C to produce electrical energy. Additional methods and systems/compositions are also provided.

Cooper, John F. (Oakland, CA); Tillotson, Thomas M. (Tracy, CA); Hrubesh, Lawrence W. (Pleasanton, CA)

2010-10-12T23:59:59.000Z

360

Toroidal solutions in Horava Gravity  

E-Print Network [OSTI]

Recently a new four-dimensional non relativistic renormalizable theory of gravity was proposed by Horava. This gravity reduces to Einstein gravity at large distances. In this paper by using the new action for gravity we present different toroidal solutions to the equations of motion. Our solutions describe the near horizon geometry with slow rotating parameter.

Ahmad Ghodsi

2011-02-24T23:59:59.000Z

Note: This page contains sample records for the topic "ada carbon solutions" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

FIELD TEST PROGRAM TO DEVELOP COMPREHENSIVE DESIGN, OPERATING, AND COST DATA FOR MERCURY CONTROL SYSTEMS  

SciTech Connect (OSTI)

With the Nation's coal-burning utilities facing the possibility of tighter controls on mercury pollutants, the U.S. Department of Energy is funding projects that could offer power plant operators better ways to reduce these emissions at much lower costs. Mercury is known to have toxic effects on the nervous system of humans and wildlife. Although it exists only in trace amounts in coal, mercury is released when coal burns and can accumulate on land and in water. In water, bacteria transform the metal into methylmercury, the most hazardous form of the metal. Methylmercury can collect in fish and marine mammals in concentrations hundreds of thousands times higher than the levels in surrounding waters. One of the goals of DOE is to develop technologies by 2005 that will be capable of cutting mercury emissions 50 to 70 percent at well under one-half of today's costs. ADA Environmental Solutions (ADA-ES) is managing a project to test mercury control technologies at full scale at four different power plants from 2000--2003. The ADA-ES project is focused on those power plants that are not equipped with wet flue gas desulfurization systems. ADA-ES has developed a portable system that will be tested at four different utility power plants. Each of the plants is equipped with either electrostatic precipitators or fabric filters to remove solid particles from the plant's flue gas. ADA-ES's technology will inject a dry sorbent, such as activated carbon, which removes the mercury and makes it more susceptible to capture by the particulate control devices. A fine water mist may be sprayed into the flue gas to cool its temperature to the range where the dry sorbent is most effective. PG&E National Energy Group is providing two test sites that fire bituminous coals and both are equipped with electrostatic precipitators and carbon/ash separation systems. Wisconsin Electric Power Company is providing a third test site that burns Powder River Basin (PRB) coal and has an electrostatic precipitator for particulate control. Alabama Power Company will host a fourth test at its Plant Gaston, which is equipped with a hot-side electrostatic precipitator and a downstream fabric filter.

Michael D. Durham

2003-05-01T23:59:59.000Z

362

FIELD TEST PROGRAM TO DEVELOP COMPREHENSIVE DESIGN, OPERATING AND COST DATA FOR MERCURY CONTROL SYSTEMS ON NON-SCRUBBED COAL-FIRED BOILERS  

SciTech Connect (OSTI)

With the nation's coal-burning utilities facing the possibility of tighter controls on mercury pollutants, the U.S. Department of Energy is funding projects that could offer power plant operators better ways to reduce these emissions at much lower costs. Mercury is known to have toxic effects on the nervous systems of humans and wildlife. Although it exists only in trace amounts in coal, mercury is released when coal burns and can accumulate on land and in water. In water, bacteria transform the metal into methylmercury, the most hazardous form of the metal. Methylmercury can collect in fish and marine mammals in concentrations hundreds of thousands times higher than the levels in surrounding waters. One of the goals of DOE is to develop technologies by 2005 that will be capable of cutting mercury emissions 50 to 70 percent at well under one-half of projected DOE/EPA early cost estimates. ADA Environmental Solutions (ADA-ES) is managing a project to test mercury control technologies at full scale at four different power plants from 2000--2003. The ADA-ES project is focused on those power plants that are not equipped with wet flue gas desulfurization systems. ADA-ES has developed a portable system that will be tested at four different utility power plants. Each of the plants is equipped with either electrostatic precipitators or fabric filters to remove solid particles from the plant's flue gas. ADA-ES's technology will inject a dry sorbent, such as activated carbon, which removes the mercury and makes it more susceptible to capture by the particulate control devices. A fine water mist may be sprayed into the flue gas to cool its temperature to the range where the dry sorbent is most effective. PG&E National Energy Group is providing two test sites that fire bituminous coals and both are equipped with electrostatic precipitators and carbon/ash separation systems. Wisconsin Electric Power Company is providing a third test site that burns Powder River Basin (PRB) coal and has an electrostatic precipitator for particulate control. Alabama Power Company will host a fourth test at its Plant Gaston, which is equipped with a hot-side electrostatic precipitator and a downstream fabric filter.

Jean Bustard

2004-04-27T23:59:59.000Z

363

FIELD TEST PROGRAM TO DEVELOP COMPREHENSIVE DESIGN, OPERATING AND COST DATA FOR MERCURY CONTROL SYSTEMS ON NON-SCRUBBED COAL-FIRED BOILERS  

SciTech Connect (OSTI)

With the Nation's coal-burning utilities facing the possibility of tighter controls on mercury pollutants, the U.S. Department of Energy is funding projects that could offer power plant operators better ways to reduce these emissions at much lower costs. Mercury is known to have toxic effects on the nervous system of humans and wildlife. Although it exists only in trace amounts in coal, mercury is released when coal burns and can accumulate on land and in water. In water, bacteria transform the metal into methylmercury, the most hazardous form of the metal. Methylmercury can collect in fish and marine mammals in concentrations hundreds of thousands times higher than the levels in surrounding waters. One of the goals of DOE is to develop technologies by 2005 that will be capable of cutting mercury emissions 50 to 70 percent at well under one-half of today's costs. ADA Environmental Solutions (ADA-ES) is managing a project to test mercury control technologies at full scale at four different power plants from 2000--2003. The ADA-ES project is focused on those power plants that are not equipped with wet flue gas desulfurization systems. ADA-ES will develop a portable system that will be moved to four different utility power plants for field testing. Each of the plants is equipped with either electrostatic precipitators or fabric filters to remove solid particles from the plant's flue gas. ADA-ES's technology will inject a dry sorbent, such as fly ash or activated carbon, that removes the mercury and makes it more susceptible to capture by the particulate control devices. A fine water mist may be sprayed into the flue gas to cool its temperature to the range where the dry sorbent is most effective. PG&E National Energy Group is providing two test sites that fire bituminous coals and are both equipped with electrostatic precipitators and carbon/ash separation systems. Wisconsin Electric Power Company is providing a third test site that burns Powder River Basin (PRB) coal and has an electrostatic precipitator for particulate control. Alabama Power Company will host a fourth test at its Plant Gaston, which is equipped with a hot-side electrostatic precipitator and a downstream fabric filter.

C. Jean Bustard

2001-10-01T23:59:59.000Z

364

FIELD TEST PROGRAM TO DEVELOP COMPREHENSIVE DESIGN, OPERATING AND COST DATA FOR MERCURY CONTROL SYSTEMS ON NON-SCRUBBED COAL-FIRED BOILERS  

SciTech Connect (OSTI)

With the Nation's coal-burning utilities facing the possibility of tighter controls on mercury pollutants, the U.S. Department of Energy is funding projects that could offer power plant operators better ways to reduce these emissions at much lower costs. Mercury is known to have toxic effects on the nervous system of humans and wildlife. Although it exists only in trace amounts in coal, mercury is released when coal burns and can accumulate on land and in water. In water, bacteria transform the metal into methylmercury, the most hazardous form of the metal. Methylmercury can collect in fish and marine mammals in concentrations hundreds of thousands times higher than the levels in surrounding waters. One of the goals of DOE is to develop technologies by 2005 that will be capable of cutting mercury emissions 50 to 70 percent at well under one-half of today's costs. ADA Environmental Solutions (ADA-ES) is managing a project to test mercury control technologies at full scale at four different power plants from 2000--2003. The ADA-ES project is focused on those power plants that are not equipped with wet flue gas desulfurization systems. ADA-ES will develop a portable system that will be moved to four different utility power plants for field testing. Each of the plants is equipped with either electrostatic precipitators or fabric filters to remove solid particles from the plant's flue gas. ADA-ES's technology will inject a dry sorbent, such as fly ash or activated carbon, that removes the mercury and makes it more susceptible to capture by the particulate control devices. A fine water mist may be sprayed into the flue gas to cool its temperature to the range where the dry sorbent is most effective. PG and E National Energy Group is providing two test sites that fire bituminous coals and are both equipped with electrostatic precipitators and carbon/ash separation systems. Wisconsin Electric Power Company is providing a third test site that burns Powder River Basin coal and has an electrostatic precipitator for particulate control. Alabama Power Company will host a fourth test at its Plant Gaston, which is equipped with a hot-side electrostatic precipitator and a downstream fabric filter.

C. Jean Bustard

2001-07-06T23:59:59.000Z

365

FIELD TEST PROGRAM TO DEVELOP COMPREHENSIVE DESIGN, OPERATING AND COST DATA FOR MERCURY CONTROL SYSTEMS ON NON-SCRUBBED COAL-FIRED BOILERS  

SciTech Connect (OSTI)

With the nation's coal-burning utilities facing the possibility of tighter controls on mercury pollutants, the U.S. Department of Energy is funding projects that could offer power plant operators better ways to reduce these emissions at much lower costs. Mercury is known to have toxic effects on the nervous systems of humans and wildlife. Although it exists only in trace amounts in coal, mercury is released when coal burns and can accumulate on land and in water. In water, bacteria transform the metal into methylmercury, the most hazardous form of the metal. Methylmercury can collect in fish and marine mammals in concentrations hundreds of thousands times higher than the levels in surrounding waters. One of the goals of DOE is to develop technologies by 2005 that will be capable of cutting mercury emissions 50 to 70 percent at well under one-half of projected DOE/EPA early cost estimates. ADA Environmental Solutions (ADA-ES) is managing a project to test mercury control technologies at full scale at four different power plants from 2000-2003. The ADA-ES project is focused on those power plants that are not equipped with wet flue gas desulfurization systems. ADA-ES has developed a portable system that was tested at four different utility power plants. Each of the plants is equipped with either electrostatic precipitators or fabric filters to remove solid particles from the plant's flue gas. ADA-ES's technology injects a dry sorbent, such as activated carbon, which removes the mercury and makes it more susceptible to capture by the particulate control devices. PG&E National Energy Group provided two test sites that fire bituminous coals and both are equipped with electrostatic precipitators and carbon/ash separation systems. Wisconsin Electric Power Company provided a third test site that burns Powder River Basin (PRB) coal and has an electrostatic precipitator for particulate control. Alabama Power Company hosted a fourth test at its Plant Gaston, which is equipped with a hot-side electrostatic precipitator and a downstream fabric filter. During the fifteenth reporting quarter, progress was made on the project in the following areas: (1) Test Sites--Final Reports for the two remaining plants are being written (Salem Harbor and Brayton Point). (2) Technology Transfer--Technical information about the project was presented to a number of organizations during the quarter including members of congress, coal companies, architect/engineering firms, National Mining Association, the North Carolina Department of Air Quality, the National Coal Council and EPA.

Jean Bustard; Richard Schlager

2004-08-03T23:59:59.000Z

366

FIELD TEST PROGRAM TO DEVELOP COMPREHENSIVE DESIGN, OPERATING AND COST DATA FOR MERCURY CONTROL SYSTEMS ON NON-SCRUBBED COAL-FIRED BOILERS  

SciTech Connect (OSTI)

With the Nation's coal-burning utilities facing the possibility of tighter controls on mercury pollutants, the U.S. Department of Energy is funding projects that could offer power plant operators better ways to reduce these emissions at much lower costs. Mercury is known to have toxic effects on the nervous system of humans and wildlife. Although it exists only in trace amounts in coal, mercury is released when coal burns and can accumulate on land and in water. In water, bacteria transform the metal into methylmercury, the most hazardous form of the metal. Methylmercury can collect in fish and marine mammals in concentrations hundreds of thousands times higher than the levels in surrounding waters. One of the goals of DOE is to develop technologies by 2005 that will be capable of cutting mercury emissions 50 to 70 percent at well under one-half of today's costs. ADA Environmental Solutions (ADA-ES) is managing a project to test mercury control technologies at full scale at four different power plants from 2000-2003. The ADA-ES project is focused on those power plants that are not equipped with wet flue gas desulfurization systems. ADA-ES has developed a portable system that will be tested at four different utility power plants. Each of the plants is equipped with either electrostatic precipitators or fabric filters to remove solid particles from the plant's flue gas. ADA-ES's technology will inject a dry sorbent, such as activated carbon, which removes the mercury and makes it more susceptible to capture by the particulate control devices. A fine water mist may be sprayed into the flue gas to cool its temperature to the range where the dry sorbent is most effective. PG&E National Energy Group is providing two test sites that fire bituminous coals and both are equipped with electrostatic precipitators and carbon/ash separation systems. Wisconsin Electric Power Company is providing a third test site that burns Powder River Basin (PRB) coal and has an electrostatic precipitator for particulate control. Alabama Power Company will host a fourth test at its Plant Gaston, which is equipped with a hot-side electrostatic precipitator and a downstream fabric filter. During the eleventh reporting quarter, progress was made on the project in the following areas: (1) All Test Sites--Final reports for Gaston and Pleasant Prairie are complete and have been issued; and Ongoing data and sample analysis is nearly complete as well as work on the final reports. (2) Technology Transfer--A number of technical presentations and briefings were made during the quarter. Several papers were presented at the MEGA Symposium in Washington DC.

Richard Schlager; Tom Millar

2003-07-01T23:59:59.000Z

367

FIELD TEST PROGRAM TO DEVELOP COMPREHENSIVE DESIGN, OPERATING AND COST DATA FOR MERCURY CONTROL SYSTEMS ON NON-SCRUBBED COAL-FIRED BOILERS  

SciTech Connect (OSTI)

With the Nation's coal-burning utilities facing the possibility of tighter controls on mercury pollutants, the U.S. Department of Energy is funding projects that could offer power plant operators better ways to reduce these emissions at much lower costs. Mercury is known to have toxic effects on the nervous system of humans and wildlife. Although it exists only in trace amounts in coal, mercury is released when coal burns and can accumulate on land and in water. In water, bacteria transform the metal into methylmercury, the most hazardous form of the metal. Methylmercury can collect in fish and marine mammals in concentrations hundreds of thousands times higher than the levels in surrounding waters. One of the goals of DOE is to develop technologies by 2005 that will be capable of cutting mercury emissions 50 to 70 percent at well under one-half of today's costs. ADA Environmental Solutions (ADA-ES) is managing a project to test mercury control technologies at full scale at four different power plants from 2000 to 2003. The ADA-ES project is focused on those power plants that are not equipped with wet flue gas desulfurization systems. ADA-ES will develop a portable system that will be moved to four different utility power plants for field testing. Each of the plants is equipped with either electrostatic precipitators or fabric filters to remove solid particles from the plant's flue gas. ADA-ES's technology will inject a dry sorbent, such as fly ash or activated carbon, that removes the mercury and makes it more susceptible to capture by the particulate control devices. A fine water mist may be sprayed into the flue gas to cool its temperature to the range where the dry sorbent is most effective. PG and E National Energy Group is providing two test sites that fire bituminous coals and are both equipped with electrostatic precipitators and carbon/ash separation systems. Wisconsin Electric Power Company is providing a third test site that burns Powder River Basin (PRB) coal and has an electrostatic precipitator for particulate control. Alabama Power Company will host a fourth test at its Plant Gaston, which is equipped with a hot-side electrostatic precipitator and a downstream fabric filter.

C. Jean Bustard

2001-07-31T23:59:59.000Z

368

FIELD TEST PROGRAM TO DEVELOP COMPREHENSIVE DESIGN, OPERATING AND COST DATA FOR MERCURY CONTROL SYSTEMS ON NON-SCRUBBED COAL-FIRED BOILERS  

SciTech Connect (OSTI)

With the nation's coal-burning utilities facing the possibility of tighter controls on mercury pollutants, the U.S. Department of Energy is funding projects that could offer power plant operators better ways to reduce these emissions at much lower costs. Mercury is known to have toxic effects on the nervous systems of humans and wildlife. Although it exists only in trace amounts in coal, mercury is released when coal burns and can accumulate on land and in water. In water, bacteria transform the metal into methylmercury, the most hazardous form of the metal. Methylmercury can collect in fish and marine mammals in concentrations hundreds of thousands times higher than the levels in surrounding waters. One of the goals of DOE is to develop technologies by 2005 that will be capable of cutting mercury emissions 50 to 70 percent at well under one-half of projected DOE/EPA early cost estimates. ADA Environmental Solutions (ADA-ES) is managing a project to test mercury control technologies at full scale at four different power plants from 2000-2003. The ADA-ES project is focused on those power plants that are not equipped with wet flue gas desulfurization systems. ADA-ES has developed a portable system that was tested at four different utility power plants. Each of the plants is equipped with either electrostatic precipitators or fabric filters to remove solid particles from the plant's flue gas. ADA-ES's technology injects a dry sorbent, such as activated carbon, which removes the mercury and makes it more susceptible to capture by the particulate control devices. PG&E National Energy Group provided two test sites that fire bituminous coals and both are equipped with electrostatic precipitators and carbon/ash separation systems. Wisconsin Electric Power Company provided a third test site that burns Powder River Basin (PRB) coal and has an electrostatic precipitator for particulate control. Alabama Power Company hosted a fourth test at its Plant Gaston, which is equipped with a hot-side electrostatic precipitator and a downstream fabric filter. During the seventeenth reporting quarter, progress was made on the project in the following areas: Test Sites--The Topical Report for the Salem Harbor Station was issued during the quarter. The Topical Report for the Brayton Point Station testing is in preparation; and Technology Transfer--Technical information about the project was presented at PowerGen and at an A&WMA Rocky Mountain States Section meeting.

Jean Bustard; Richard Schlager

2005-01-03T23:59:59.000Z

369

FIELD TEST PROGRAM TO DEVELOP COMPREHENSIVE DESIGN, OPERATING AND COST DATA FOR MERCURY CONTROL SYSTEMS ON NON-SCRUBBED COAL-FIRED BOILERS  

SciTech Connect (OSTI)

With the Nation's coal-burning utilities facing the possibility of tighter controls on mercury pollutants, the U.S. Department of Energy is funding projects that could offer power plant operators better ways to reduce these emissions at much lower costs. Mercury is known to have toxic effects on the nervous system of humans and wildlife. Although it exists only in trace amounts in coal, mercury is released when coal burns and can accumulate on land and in water. In water, bacteria transform the metal into methylmercury, the most hazardous form of the metal. Methylmercury can collect in fish and marine mammals in concentrations hundreds of thousands times higher than the levels in surrounding waters. One of the goals of DOE is to develop technologies by 2005 that will be capable of cutting mercury emissions 50 to 70 percent at well under one-half of today's costs. ADA Environmental Solutions (ADA-ES) is managing a project to test mercury control technologies at full scale at four different power plants from 2000-2003. The ADA-ES project is focused on those power plants that are not equipped with wet flue gas desulfurization systems. ADA-ES has developed a portable system that will be tested at four different utility power plants. Each of the plants is equipped with either electrostatic precipitators or fabric filters to remove solid particles from the plant's flue gas. ADA-ES's technology will inject a dry sorbent, such as activated carbon, which removes the mercury and makes it more susceptible to capture by the particulate control devices. A fine water mist may be sprayed into the flue gas to cool its temperature to the range where the dry sorbent is most effective. PG&E National Energy Group is providing two test sites that fire bituminous coals and both are equipped with electrostatic precipitators and carbon/ash separation systems. Wisconsin Electric Power Company is providing a third test site that burns Powder River Basin (PRB) coal and has an electrostatic precipitator for particulate control. Alabama Power Company will host a fourth test at its Plant Gaston, which is equipped with a hot-side electrostatic precipitator and a downstream fabric filter. During the twelfth reporting quarter, progress was made on the project in the following areas: All Test Sites--Ongoing data and sample analysis for the two remaining plants is nearly complete as well as work on the final reports. Technology Transfer--A number of technical presentations and briefings were made during the quarter. Several papers were presented at Air Quality IV in Washington D.C.

Richard Schlager; Tom Millar

2003-11-04T23:59:59.000Z

370

FIELD TEST PROGRAM TO DEVELOP COMPREHENSIVE DESIGN, OPERATING AND COST DATA FOR MERCURY CONTROL SYSTEMS ON NON-SCRUBBED COAL-FIRED BOILERS  

SciTech Connect (OSTI)

With the Nation's coal-burning utilities facing the possibility of tighter controls on mercury pollutants, the U.S. Department of Energy is funding projects that could offer power plant operators better ways to reduce these emissions at much lower costs. Mercury is known to have toxic effects on the nervous system of humans and wildlife. Although it exists only in trace amounts in coal, mercury is released when coal burns and can accumulate on land and in water. In water, bacteria transform the metal into methylmercury, the most hazardous form of the metal. Methylmercury can collect in fish and marine mammals in concentrations hundreds of thousands times higher than the levels in surrounding waters. One of the goals of DOE is to develop technologies by 2005 that will be capable of cutting mercury emissions 50 to 70 percent at well under one-half of today's costs. ADA Environmental Solutions (ADA-ES) is managing a project to test mercury control technologies at full scale at four different power plants from 2000--2003. The ADA-ES project is focused on those power plants that are not equipped with wet flue gas desulfurization systems. ADA-ES will develop a portable system that will be moved to four different utility power plants for field testing. Each of the plants is equipped with either electrostatic precipitators or fabric filters to remove solid particles from the plant's flue gas. ADA-ES's technology will inject a dry sorbent, such as fly ash or activated carbon, that removes the mercury and makes it more susceptible to capture by the particulate control devices. A fine water mist may be sprayed into the flue gas to cool its temperature to the range where the dry sorbent is most effective. PG&E National Energy Group is providing two test sites that fire bituminous coals and are both equipped with electrostatic precipitators and carbon/ash separation systems. Wisconsin Electric Power Company is providing a third test site that burns Powder River Basin (PRB) coal and has an electrostatic precipitator for particulate control. Alabama Power Company will host a fourth test at its Plant Gaston, which is equipped with a hot-side electrostatic precipitator and a downstream fabric filter.

Richard Schlager

2002-04-19T23:59:59.000Z

371

FIELD TEST PROGRAM TO DEVELOP COMPREHENSIVE DESIGN, OPERATING AND COST DATA FOR MERCURY CONTROL SYSTEMS ON NON-SCRUBBED COAL-FIRED BOILERS  

SciTech Connect (OSTI)

With the Nation's coal-burning utilities facing the possibility of tighter controls on mercury pollutants, the U.S. Department of Energy is funding projects that could offer power plant operators better ways to reduce these emissions at much lower costs. Mercury is known to have toxic effects on the nervous system of humans and wildlife. Although it exists only in trace amounts in coal, mercury is released when coal burns and can accumulate on land and in water. In water, bacteria transform the metal into methylmercury, the most hazardous form of the metal. Methylmercury can collect in fish and marine mammals in concentrations hundreds of thousands times higher than the levels in surrounding waters. One of the goals of DOE is to develop technologies by 2005 that will be capable of cutting mercury emissions 50 to 70 percent at well under one-half of today's costs. ADA Environmental Solutions (ADA-ES) is managing a project to test mercury control technologies at full scale at four different power plants from 2000--2003. The ADA-ES project is focused on those power plants that are not equipped with wet flue gas desulfurization systems. ADA-ES will develop a portable system that will be moved to four different utility power plants for field testing. Each of the plants is equipped with either electrostatic precipitators or fabric filters to remove solid particles from the plant's flue gas. ADA-ES's technology will inject a dry sorbent, such as fly ash or activated carbon, that removes the mercury and makes it more susceptible to capture by the particulate control devices. A fine water mist may be sprayed into the flue gas to cool its temperature to the range where the dry sorbent is most effective. PG&E National Energy Group is providing two test sites that fire bituminous coals and are both equipped with electrostatic precipitators and carbon/ash separation systems. Wisconsin Electric Power Company is providing a third test site that burns Powder River Basin (PRB) coal and has an electrostatic precipitator for particulate control. Alabama Power Company will host a fourth test at its Plant Gaston, which is equipped with a hot-side electrostatic precipitator and a downstream fabric filter.

C. Jean Bustard

2002-01-07T23:59:59.000Z

372

FIELD TEST PROGRAM TO DEVELOP COMPREHENSIVE DESIGN, OPERATING AND COST DATA FOR MERCURY CONTROL SYSTEMS ON NON-SCRUBBED COAL-FIRED BOILERS  

SciTech Connect (OSTI)

With the nation's coal-burning utilities facing the possibility of tighter controls on mercury pollutants, the U.S. Department of Energy is funding projects that could offer power plant operators better ways to reduce these emissions at much lower costs. Mercury is known to have toxic effects on the nervous systems of humans and wildlife. Although it exists only in trace amounts in coal, mercury is released when coal burns and can accumulate on land and in water. In water, bacteria transform the metal into methylmercury, the most hazardous form of the metal. Methylmercury can collect in fish and marine mammals in concentrations hundreds of thousands times higher than the levels in surrounding waters. One of the goals of DOE is to develop technologies by 2005 that will be capable of cutting mercury emissions 50 to 70 percent at well under one-half of projected DOE/EPA early cost estimates. ADA Environmental Solutions (ADA-ES) is managing a project to test mercury control technologies at full scale at four different power plants from 2000-2003. The ADA-ES project is focused on those power plants that are not equipped with wet flue gas desulfurization systems. ADA-ES has developed a portable system that was tested at four different utility power plants. Each of the plants is equipped with either electrostatic precipitators or fabric filters to remove solid particles from the plant's flue gas. ADA-ES's technology injects a dry sorbent, such as activated carbon, which removes the mercury and makes it more susceptible to capture by the particulate control devices. PG&E National Energy Group provided two test sites that fire bituminous coals and both are equipped with electrostatic precipitators and carbon/ash separation systems. Wisconsin Electric Power Company provided a third test site that burns Powder River Basin (PRB) coal and has an electrostatic precipitator for particulate control. Alabama Power Company hosted a fourth test at its Plant Gaston, which is equipped with a hot-side electrostatic precipitator and a downstream fabric filter. During the sixteenth reporting quarter, progress was made on the project in the following areas: (1) Test Sites--The Topical Report for the Salem Harbor Station testing was completed during the quarter and will be issued early next quarter. The Topical Report for the Brayton Point Station testing is in preparation. (2) Technology Transfer--Technical information about the project was presented to a chemistry workshop during the quarter.

Jean Bustard; Richard Schlager

2004-10-25T23:59:59.000Z

373

FIELD TEST PROGRAM TO DEVELOP COMPREHENSIVE DESIGN, OPERATING AND COST DATA FOR MERCURY CONTROL SYSTEMS ON NON-SCRUBBED COAL-FIRED BOILERS  

SciTech Connect (OSTI)

With the Nation's coal-burning utilities facing the possibility of tighter controls on mercury pollutants, the U.S. Department of Energy is funding projects that could offer power plant operators better ways to reduce these emissions at much lower costs. Mercury is known to have toxic effects on the nervous system of humans and wildlife. Although it exists only in trace amounts in coal, mercury is released when coal burns and can accumulate on land and in water. In water, bacteria transform the metal into methylmercury, the most hazardous form of the metal. Methylmercury can collect in fish and marine mammals in concentrations hundreds of thousands times higher than the levels in surrounding waters. One of the goals of DOE is to develop technologies by 2005 that will be capable of cutting mercury emissions 50 to 70 percent at well under one-half of today's costs. ADA Environmental Solutions (ADA-ES) is managing a project to test mercury control technologies at full scale at four different power plants from 2000-2003. The ADA-ES project is focused on those power plants that are not equipped with wet flue gas desulfurization systems. ADA-ES has developed a portable system that will be tested at four different utility power plants. Each of the plants is equipped with either electrostatic precipitators or fabric filters to remove solid particles from the plant's flue gas. ADA-ES's technology will inject a dry sorbent, such as activated carbon, which removes the mercury and makes it more susceptible to capture by the particulate control devices. A fine water mist may be sprayed into the flue gas to cool its temperature to the range where the dry sorbent is most effective. PG&E National Energy Group is providing two test sites that fire bituminous coals and both are equipped with electrostatic precipitators and carbon/ash separation systems. Wisconsin Electric Power Company is providing a third test site that burns Powder River Basin (PRB) coal and has an electrostatic precipitator for particulate control. Alabama Power Company will host a fourth test at its Plant Gaston, which is equipped with a hot-side electrostatic precipitator and a downstream fabric filter. During the thirteenth reporting quarter, progress was made on the project in the following areas: All Test Sites--Ongoing data and sample analysis for the two remaining plants is nearly complete as well as work on the final reports. Technology Transfer--A number of technical presentations and briefings were made during the quarter.

Richard Schlager; Tom Millar

2003-03-02T23:59:59.000Z

374

FIELD TEST PROGRAM TO DEVELOP COMPREHENSIVE DESIGN, OPERATING AND COST DATA FOR MERCURY CONTROL SYSTEMS ON NON-SCRUBBED COAL-FIRED BOILERS  

SciTech Connect (OSTI)

With the Nation's coal-burning utilities facing the possibility of tighter controls on mercury pollutants, the U.S. Department of Energy is funding projects that could offer power plant operators better ways to reduce these emissions at much lower costs. Mercury is known to have toxic effects on the nervous system of humans and wildlife. Although it exists only in trace amounts in coal, mercury is released when coal burns and can accumulate on land and in water. In water, bacteria transform the metal into methylmercury, the most hazardous form of the metal. Methylmercury can collect in fish and marine mammals in concentrations hundreds of thousands times higher than the levels in surrounding waters. One of the goals of DOE is to develop technologies by 2005 that will be capable of cutting mercury emissions 50 to 70 percent at well under one-half of today's costs. ADA Environmental Solutions (ADA-ES) is managing a project to test mercury control technologies at full scale at four different power plants from 2000--2003. The ADA-ES project is focused on those power plants that are not equipped with wet flue gas desulfurization systems. ADA-ES has developed a portable system that will be tested at four different utility power plants. Each of the plants is equipped with either electrostatic precipitators or fabric filters to remove solid particles from the plant's flue gas. ADA-ES's technology will inject a dry sorbent, such as activated carbon, which removes the mercury and makes it more susceptible to capture by the particulate control devices. A fine water mist may be sprayed into the flue gas to cool its temperature to the range where the dry sorbent is most effective. PG&E National Energy Group is providing two test sites that fire bituminous coals and both are equipped with electrostatic precipitators and carbon/ash separation systems. Wisconsin Electric Power Company is providing a third test site that burns Powder River Basin (PRB) coal and has an electrostatic precipitator for particulate control. Alabama Power Company will host a fourth test at its Plant Gaston, which is equipped with a hot-side electrostatic precipitator and a downstream fabric filter. During the tenth reporting quarter, progress was made on the project in the following areas: (1) All Test Sites--Ongoing data and sample analysis as well as work on the final reports. (2) Technology Transfer--A number of technical presentations and briefings were made during the quarter. One paper was presented at the American Coal Council Workshop and one at the EUCE Conference.

Richard Schlager; Tom Millar

2003-04-28T23:59:59.000Z

375

A mathematical model for countercurrent moving-bed activated carbon adsorption  

E-Print Network [OSTI]

the column. There was insufficient data taken to verify this model. The testing procedure was limited by the approximate uniformity of the influent concentrations in the pilot plant and the effect of the activated carbon concentration and initial solute...A MATHEMATICAL MODEL FOR COUNTERCURRENT MOVING-BED ACTIVATED CARBON ADSORPTION A Thesis by DOUGLAS HAROLD ANDERSON Submitted to the Graduate College of Texas ASM University in partial fulfillment of the requirement for the degree of MASTER...

Anderson, Douglas Harold

1976-01-01T23:59:59.000Z

376

Black Carbon’s Properties and Role in the Environment: A Comprehensive Review  

E-Print Network [OSTI]

NOAA/ESRL. Mauna Loa Carbon Dioxide Annual Mean Data.H. Can reducing black carbon emissions counteract globalanalysis of black carbon in soils. Global Biogeochem. Cycle.

Shrestha, Gyami

2010-01-01T23:59:59.000Z

377

Carbon Capital: The Political Ecology of Carbon Forestry and Development in Chiapas, Mexico  

E-Print Network [OSTI]

B v + B d ) C T = Total carbon B v = biomass contained indevelopment through carbon sequestration: experiences in2000) Rural livelihoods and carbon management, IIED Natural

Osborne, Tracey Muttoo

2010-01-01T23:59:59.000Z

378

Method for joining carbon-carbon composites to metals  

DOE Patents [OSTI]

A method for joining carbon-carbon composites to metals by brazing. Conventional brazing of recently developed carbon-bonded carbon fiber (CBCF) material to a metal substrate is limited by the tendency of the braze alloy to ``wick`` into the CBCF composite rather than to form a strong bond. The surface of the CBCF composite that is to be bonded is first sealed with a fairly dense carbonaceous layer achieved by any of several methods. The sealed surface is then brazed to the metal substrate by vacuum brazing with a Ti-Cu-Be alloy. 1 fig.

Lauf, R.J.; McMillan, A.D.; Moorhead, A.J.

1997-07-15T23:59:59.000Z

379

Method for joining carbon-carbon composites to metals  

DOE Patents [OSTI]

A method for joining carbon-carbon composites to metals by brazing. Conventional brazing of recently developed carbon-bonded carbon fiber (CBCF) material to a metal substrate is limited by the tendency of the braze alloy to "wick" into the CBCF composite rather than to form a strong bond. The surface of the CBCF composite that is to be bonded is first sealed with a fairly dense carbonaceous layer achieved by any of several methods. The sealed surface is then brazed to the metal substrate by vacuum brazing with a Ti-Cu-Be alloy.

Lauf, Robert J. (Oak Ridge, TN); McMillan, April D. (Knoxville, TN); Moorhead, Arthur J. (Knoxville, TN)

1997-01-01T23:59:59.000Z

380

Carbonation Mechanism of Reservoir Rock by Supercritical Carbon...  

Broader source: Energy.gov (indexed) [DOE]

chemistrybutchercarbonationmechanism.pdf More Documents & Publications Synchrotron X-ray Studies of Super-critical Carbon Dioxide Reservoir Rock Interfaces Innovative...

Note: This page contains sample records for the topic "ada carbon solutions" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Reducing Demand through Efficiency and Services: Impacts and Opportunities in Buildings Sector (Carbon Cycle 2.0)  

SciTech Connect (OSTI)

Mary Ann Piette, Deputy of LBNL's Building Technologies Department and Director of the Demand Response Research Center, speaks at the Carbon Cycle 2.0 kick-off symposium Feb. 2, 2010. We emit more carbon into the atmosphere than natural processes are able to remove - an imbalance with negative consequences. Carbon Cycle 2.0 is a Berkeley Lab initiative to provide the science needed to restore this balance by integrating the Labs diverse research activities and delivering creative solutions toward a carbon-neutral energy future. http://carboncycle2.lbl.gov/

Piette, Mary Ann [Director, Demand Response Research Center] [Director, Demand Response Research Center

2010-02-02T23:59:59.000Z

382

Reducing Demand through Efficiency and Services: Impacts and Opportunities in Buildings Sector (Carbon Cycle 2.0)  

ScienceCinema (OSTI)

Mary Ann Piette, Deputy of LBNL's Building Technologies Department and Director of the Demand Response Research Center, speaks at the Carbon Cycle 2.0 kick-off symposium Feb. 2, 2010. We emit more carbon into the atmosphere than natural processes are able to remove - an imbalance with negative consequences. Carbon Cycle 2.0 is a Berkeley Lab initiative to provide the science needed to restore this balance by integrating the Labs diverse research activities and delivering creative solutions toward a carbon-neutral energy future. http://carboncycle2.lbl.gov/

Piette, Mary Ann [Director, Demand Response Research Center

2011-06-08T23:59:59.000Z

383

Microwave-assisted synthesis of carbon nanotubes from tannin, lignin, and derivatives  

SciTech Connect (OSTI)

A method of synthesizing carbon nanotubes. In one embodiment, the method includes the steps of: (a) dissolving a first amount of a first transition-metal salt and a second amount of a second transition-metal salt in water to form a solution; (b) adding a third amount of tannin to the solution to form a mixture; (c) heating the mixture to a first temperature for a first duration of time to form a sample; and (d) subjecting the sample to a microwave radiation for a second duration of time effective to produce a plurality of carbon nanotubes.

Viswanathan, Tito

2014-06-17T23:59:59.000Z

384

Methods of synthesizing carbon-magnetite nanocomposites from renewable resource materials and application of same  

DOE Patents [OSTI]

A method of synthesizing carbon-magnetite nanocomposites. In one embodiment, the method includes the steps of (a) dissolving a first amount of an alkali salt of lignosulfonate in water to form a first solution, (b) heating the first solution to a first temperature, (c) adding a second amount of iron sulfate (FeSO.sub.4) to the first solution to form a second solution, (d) heating the second solution at a second temperature for a first duration of time effective to form a third solution of iron lignosulfonate, (e) adding a third amount of 1N sodium hydroxide (NaOH) to the third solution of iron lignosulfonate to form a fourth solution with a first pH level, (f) heating the fourth solution at a third temperature for a second duration of time to form a first sample, and (g) subjecting the first sample to a microwave radiation for a third duration of time effective to form a second sample containing a plurality of carbon-magnetite nanocomposites.

Viswanathan, Tito

2014-07-29T23:59:59.000Z

385

Polymer-assisted deposition of films and preparation of carbon nanotube arrays using the films  

DOE Patents [OSTI]

Carbon nanotubes were prepared by coating a substrate with a coating solution including a suitable solvent, a soluble polymer, a metal precursor having a first metal selected from iron, nickel, cobalt, and molybdenum, and optionally a second metal selected from aluminum and magnesium, and also a binding agent that forms a complex with the first metal and a complex with the second metal. The coated substrate was exposed to a reducing atmosphere at elevated temperature, and then to a hydrocarbon in the reducing atmosphere. The result was decomposition of the polymer and formation of carbon nanotubes on the substrate. The carbon nanotubes were often in the form of an array on the substrate.

Luo, Hongmei; Li, Qingwen; Bauer, Eve; Burrell, Anthony Keiran; McCleskey, Thomas Mark; Jia, Quanxi

2013-07-16T23:59:59.000Z

386

Assessment of Brine Management for Geologic Carbon Sequestration  

E-Print Network [OSTI]

for  Geologic  Carbon  Sequestration. ”   International  of  Energy.  “Carbon  Sequestration  Atlas  of  the  Water  Extracted  from  Carbon  Sequestration  Projects."  

Breunig, Hanna M.

2014-01-01T23:59:59.000Z

387

Carbon Sequestration Atlas and Interactive Maps from the Southwest Regional Partnership on Carbon Sequestration  

DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

In November of 2002, DOE announced a global climate change initiative involving joint government-industry partnerships working together to find sensible, low cost solutions for reducing GHG emissions. As a result, seven regional partnerships were formed; the Southwest Regional Partnership on Carbon Sequestration (SWP) is one of those. These groups are utilizing their expertise to assess sequestration technologies to capture carbon emissions, identify and evaluate appropriate storage locations, and engage a variety of stakeholders in order to increase awareness of carbon sequestration. Stakeholders in this project are made up of private industry, NGOs, the general public, and government entities. There are a total of 44 current organizations represented in the partnership including electric utilities, oil and gas companies, state governments, universities, NGOs, and tribal nations. The SWP is coordinated by New Mexico Tech and encompasses New Mexico, Arizona, Colorado, Oklahoma, Utah, and portions of Kansas, Nevada, Texas, and Wyoming. Field test sites for the region are located in New Mexico (San Juan Basin), Utah (Paradox Basin), and Texas (Permian Basin).[Taken from the SWP C02 Sequestration Atlas] The SWP makes available at this website their CO2 Sequestration Atlas and an interactive data map.

McPherson, Brian

388

The use of carbon aerogel electrodes for deionizing water and treating aqueous process wastes  

SciTech Connect (OSTI)

A wide variety of ionic contaminants can be removed from aqueous solutions by electrosorption on carbon aerogel electrodes. Carbon aerogel is an ideal electrode material because of its low electrical resistivity (< 40 m{Omega}-cm), high specific surface area (400 to 1100 m{sup 2}/g), and controllable pore size distribution (< 50 nm). This approach may avoid the generation of a substantial amount of secondary waste associated with ion exchange processing. Ion exchange resins require concentrated solutions of acid, base, or salt for regeneration, whereas carbon aerogel electrodes require only electrical discharge or reverse polarization. Aqueous solutions of NaCl, NaNO{sub 3}, NH{sub 4}ClO{sub 4}, Na{sub 2}CO{sub 3}, Na{sub 2}SO{sub 4} and Na{sub 3}PO{sub 4} have been separated into concentrate and high-purity product streams. The deionization of a 100 {mu}S/cm NaCl solution with two parallel stacks of carbon aerogel electrodes in a potential-swing mode is discussed in detail. The selective removal of Cu, Zn, Cd, Pb, Cr, Mn, Co and U from a variety of process solutions and natural waters has also been demonstrated. Feasibility tests indicate that the remediation of Cr(VI)-contaminated ground water may be possible.

Farmer, J.C.; Mack, G.V.; Fix, D.V.

1996-07-01T23:59:59.000Z

389

Carbonate fuel cell anodes  

DOE Patents [OSTI]

A molten alkali metal carbonates fuel cell porous anode of lithium ferrite and a metal or metal alloy of nickel, cobalt, nickel/iron, cobalt/iron, nickel/iron/aluminum, cobalt/iron/aluminum and mixtures thereof wherein the total iron content including ferrite and iron of the composite is about 25 to about 80 percent, based upon the total anode, provided aluminum when present is less than about 5 weight percent of the anode. A process is described for production of the lithium ferrite containing anode by slipcasting.

Donado, R.A.; Hrdina, K.E.; Remick, R.J.

1993-04-27T23:59:59.000Z

390

Carbonate fuel cell anodes  

DOE Patents [OSTI]

A molten alkali metal carbonates fuel cell porous anode of lithium ferrite and a metal or metal alloy of nickel, cobalt, nickel/iron, cobalt/iron, nickel/iron/aluminum, cobalt/iron/aluminum and mixtures thereof wherein the total iron content including ferrite and iron of the composite is about 25 to about 80 percent, based upon the total anode, provided aluminum when present is less than about 5 weight percent of the anode. A process for production of the lithium ferrite containing anode by slipcasting.

Donado, Rafael A. (Chicago, IL); Hrdina, Kenneth E. (Glenview, IL); Remick, Robert J. (Bolingbrook, IL)

1993-01-01T23:59:59.000Z

391

RMOTC - Testing - Carbon Management  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas ConchasPassive Solar HomePromising Science for1 20115, 2001Data setsSTWAClarke Turner,Carbon

392

Capturing carbon | EMSL  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation Proposed New Substation Sites Proposed Route BTRICGEGR-N-Capture of Carbon Dioxide

393

Carbon Capture FAQs  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation Proposed New Substation Sites Proposed Route BTRICGEGR-N-Capture of CarbonLangmuircarbon

394

ARM - Carbon Dioxide  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary)morphinanInformationbudapest Comments? We would love to heartotdngovInstrumentswrf-chem Comments?CampaignCarbon

395

Carbon Fiber Technology Facility  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-Up fromDepartmentTie Ltd:June 20154:04-21-2014 (866) 448 - DEPOMeetingIndustriesCarbon

396

Carbon Fiber Consortium | Partnerships | ORNL  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

in 2011 to accelerate the development and deployment of new, lower cost carbon fiber composite materials. The Consortium draws on the broad experience that the Oak Ridge National...

397

Carbon-assisted flyer plates  

DOE Patents [OSTI]

A laser driven flyer plate utilizing an optical fiber connected to a laser. The end of the optical fiber has a layer of carbon and a metal layer deposited onto it. The carbon layer provides the laser induced plasma which is superior to the plasma produced from most metals. The carbon layer plasma is capable of providing a flatter flyer plate, converting more of the laser energy to driving plasma, promoting a higher flyer plate acceleration, and providing a more uniform pulse behind the plate. In another embodiment, the laser is in optical communication with a substrate onto which a layer of carbon and a layer of metal have been deposited.

Stahl, David B. (Los Alamos, NM); Paisley, Dennis L. (Santa Fe, NM)

1994-01-01T23:59:59.000Z

398

Industrial Carbon Management Initiative (ICMI)  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

heat in a combustion process while producing a concentrated CO 2 stream to facilitate carbon capture. Chemical looping research efforts can be categorized as: modeling tool...

399

Carbon nanotube IR detectors (SV)  

SciTech Connect (OSTI)

Sandia National Laboratories (Sandia) and Lockheed Martin Corporation (LMC) collaborated to (1) evaluate the potential of carbon nanotubes as channels in infrared (IR) photodetectors; (2) assemble and characterize carbon nanotube electronic devices and measure the photocurrent generated when exposed to infrared light;(3) compare the performance of the carbon nanotube devices with that of traditional devices; and (4) develop and numerically implement models of electronic transport and opto-electronic behavior of carbon nanotube infrared detectors. This work established a new paradigm for photodetectors.

Leonard, F. L.

2012-03-01T23:59:59.000Z

400

Carbon Sequestration Atlas IV Video  

SciTech Connect (OSTI)

The Carbon Sequestration Atlas is a collection of all the storage sites of CO2 such as, petroleum, natural gas, coal, and oil shale.

Rodosta, Traci

2013-04-19T23:59:59.000Z

Note: This page contains sample records for the topic "ada carbon solutions" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Carbon Sequestration Advisory Committee (Nebraska)  

Broader source: Energy.gov [DOE]

Under this statute, the Director of Natural Resources will document and quantify carbon sequestration and greenhouse emissions reductions associated with agricultural practices, management systems,...

402

Carbon Sequestration Atlas IV Video  

ScienceCinema (OSTI)

The Carbon Sequestration Atlas is a collection of all the storage sites of CO2 such as, petroleum, natural gas, coal, and oil shale.

Rodosta, Traci

2014-06-27T23:59:59.000Z

403

Selection and Characterization of Carbon Black and Surfactants for Development of Small Scale Uranium Oxicarbide Kernels  

SciTech Connect (OSTI)

This report supports the effort for development of small scale fabrication of UCO (a mixture of UO{sub 2} and UC{sub 2}) fuel kernels for the generation IV high temperature gas reactor program. In particular, it is focused on optimization of dispersion conditions of carbon black in the broths from which carbon-containing (UO{sub 2} {center_dot} H{sub 2}O + C) gel spheres are prepared by internal gelation. The broth results from mixing a hexamethylenetetramine (HMTA) and urea solution with an acid-deficient uranyl nitrate (ADUN) solution. Carbon black, which is previously added to one or other of the components, must stay dispersed during gelation. The report provides a detailed description of characterization efforts and results, aimed at identification and testing carbon black and surfactant combinations that would produce stable dispersions, with carbon particle sizes below 1 {micro}m, in aqueous HMTA/urea and ADUN solutions. A battery of characterization methods was used to identify the properties affecting the water dispersability of carbon blacks, such as surface area, aggregate morphology, volatile content, and, most importantly, surface chemistry. The report introduces the basic principles for each physical or chemical method of carbon black characterization, lists the results obtained, and underlines cross-correlations between methods. Particular attention is given to a newly developed method for characterization of surface chemical groups on carbons in terms of their acid-base properties (pK{sub a} spectra) based on potentiometric titration. Fourier-transform infrared (FTIR) spectroscopy was used to confirm the identity of surfactants, both ionic and non-ionic. In addition, background information on carbon black properties and the mechanism by which surfactants disperse carbon black in water is also provided. A list of main physical and chemical properties characterized, samples analyzed, and results obtained, as well as information on the desired trend or range of values generally associated with better dispersability, is provided in the Appendix. Special attention was given to characterization of several surface-modified carbon blacks produced by Cabot Corporation through proprietary diazonium salts chemistry. As demonstrated in the report, these advanced carbons offer many advantages over traditional dispersions. They disperse very easily, do not require intensive mechanical shearing or sonication, and the particle size of the dispersed carbon black aggregates is in the target range of 0.15-0.20 {micro}m. The dispersions in water and HMTA/urea solutions are stable for at least 30 days; in conditions of simulated broth, the dispersions are stable for at least 6 hours. It is proposed that the optimization of the carbon black dispersing process is possible by replacing traditional carbon blacks and surfactants with surface-modified carbon blacks having suitable chemical groups attached on their surface. It is recognized that the method advanced in this report for optimizing the carbon black dispersion process is based on a limited number of tests made in aqueous and simulated broth conditions. The findings were corroborated by a limited number of tests carried out with ADUN solutions by the Nuclear Science and Technology Division at Oak Ridge National Laboratory (ORNL). More work is necessary, however, to confirm the overall recommendation based on the findings discussed in this report: namely, that the use of surface-modified carbon blacks in the uranium-containing broth will not adversely impact the chemistry of the gelation process, and that high quality uranium oxicarbide (UCO) kernels will be produced after calcination.

Contescu, Cristian I [ORNL

2006-01-01T23:59:59.000Z

404

Vacancy solution theory of adsorption from gas mixtures  

SciTech Connect (OSTI)

The new correlation based on vacancy-solution theory, reports Pennsylvania State University, improves predictions of gas-mixture adsorption equilibria from single-component adsorption isotherm data. The new method is more general, simpler to apply, and more accurate than other available models. For an adsorption system, the binary parameters - adsorbate and vacancy - are obtained from regression of the pure-gas adsorption data with the vacancy-solution isotherm equation. These parameters are then used to predict multicomponent adsorption equilibrium, assuming that the adsorbate-adsorbate interactions are negligible. Penn State has verified the new correlation on two different kinds of binary adsorption systems: mixtures of O/sub 2/, N/sub 2/, and CO on zeolite 10X and mixtures of light hydrocarbons on Nuxit-AL activated carbon.

Suwanayuen, S.; Danner, R.P.

1980-01-01T23:59:59.000Z

405

Self-assembling functionalized single-walled carbon nanotubes  

E-Print Network [OSTI]

Single-walled carbon nanotubes Carbon nanotubes (CNTs) arescale synthesis of carbon nanotubes." Nature, Vol.358, 220-Ropes of Metallic Carbon Nanotubes." Science, Vol.273(5274),

Gao, Yan

2011-01-01T23:59:59.000Z

406

In Situ Infrared Spectroscopic Study of Brucite Carbonation in...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Carbonation in Dry to Water-Saturated Supercritical Carbon Dioxide. Abstract: In geologic carbon sequestration, while part of the injected carbon dioxide will dissolve into host...

407

Rural Australia Providing Climate Solutions  

E-Print Network [OSTI]

in three important areas of Australia's low carbon future: providing clean energy and electricity on private land. The paper presents the best available information on the potential supply of each electricity target, such as a renewable energy target of 25% by 2020 appears challenging but feasible

Queensland, University of

408

Carbon/Ternary Alloy/Carbon Optical Stack on Mylar as an Optical...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

CarbonTernary AlloyCarbon Optical Stack on Mylar as an Optical Data Storage Medium to Potentially Replace Magnetic Tape. CarbonTernary AlloyCarbon Optical Stack on Mylar as an...

409

Gel nanostructure in alkali-activated binders based on slag and fly ash, and effects of accelerated carbonation  

SciTech Connect (OSTI)

Binders formed through alkali-activation of slags and fly ashes, including ‘fly ash geopolymers’, provide appealing properties as binders for low-emissions concrete production. However, the changes in pH and pore solution chemistry induced during accelerated carbonation testing provide unrealistically low predictions of in-service carbonation resistance. The aluminosilicate gel remaining in an alkali-activated slag system after accelerated carbonation is highly polymerised, consistent with a decalcification mechanism, while fly ash-based binders mainly carbonate through precipitation of alkali salts (bicarbonates at elevated CO{sub 2} concentrations, or carbonates under natural exposure) from the pore solution, with little change in the binder gel identifiable by nuclear magnetic resonance spectroscopy. In activated fly ash/slag blends, two distinct gels (C–A–S–H and N–A–S–H) are formed; under accelerated carbonation, the N–A–S–H gel behaves comparably to fly ash-based systems, while the C–A–S–H gel is decalcified similarly to alkali-activated slag. This provides new scope for durability optimisation, and for developing appropriate testing methodologies. -- Highlights: •C-A-S-H gel in alkali-activated slag decalcifies during accelerated carbonation. •Alkali-activated fly ash gel changes much less under CO{sub 2} exposure. •Blended slag-fly ash binder contains two coexisting gel types. •These two gels respond differently to carbonation. •Understanding of carbonation mechanisms is essential in developing test methods.

Bernal, Susan A., E-mail: s.bernal@sheffield.ac.uk [Department of Chemical and Biomolecular Engineering, The University of Melbourne, Victoria 3010 (Australia); Department of Materials Science and Engineering, The University of Sheffield, Sheffield S1 3JD (United Kingdom); Provis, John L., E-mail: j.provis@sheffield.ac.uk [Department of Chemical and Biomolecular Engineering, The University of Melbourne, Victoria 3010 (Australia); Department of Materials Science and Engineering, The University of Sheffield, Sheffield S1 3JD (United Kingdom); Walkley, Brant; San Nicolas, Rackel [Department of Chemical and Biomolecular Engineering, The University of Melbourne, Victoria 3010 (Australia)] [Department of Chemical and Biomolecular Engineering, The University of Melbourne, Victoria 3010 (Australia); Gehman, John D. [School of Chemistry and Bio21 Institute, The University of Melbourne, Victoria 3010 (Australia)] [School of Chemistry and Bio21 Institute, The University of Melbourne, Victoria 3010 (Australia); Brice, David G.; Kilcullen, Adam R. [Department of Chemical and Biomolecular Engineering, The University of Melbourne, Victoria 3010 (Australia) [Department of Chemical and Biomolecular Engineering, The University of Melbourne, Victoria 3010 (Australia); Zeobond Pty Ltd, P.O. Box 23450, Docklands, Victoria 8012 (Australia); Duxson, Peter [Zeobond Pty Ltd, P.O. Box 23450, Docklands, Victoria 8012 (Australia)] [Zeobond Pty Ltd, P.O. Box 23450, Docklands, Victoria 8012 (Australia); Deventer, Jannie S.J. van [Department of Chemical and Biomolecular Engineering, The University of Melbourne, Victoria 3010 (Australia); Zeobond Pty Ltd, P.O. Box 23450, Docklands, Victoria 8012 (Australia)

2013-11-15T23:59:59.000Z

410

University of Aberdeen Carbon Management Plan  

E-Print Network [OSTI]

of Aberdeen is committed to reducing its carbon footprint and to playing its part in limiting the worstUniversity of Aberdeen Carbon Management Plan Higher Education Carbon Management Programme working with Page 1 The University of Aberdeen Carbon Management Programme Carbon Management Plan (CMP

Levi, Ran

411

Is Nuclear Energy the Solution?  

E-Print Network [OSTI]

10.1007/s11270-009-0270-y Is Nuclear Energy the Solution?MHS) attended a lecture on “Nuclear Responsibility” on theof the Alliance for Nuclear Responsibility. The information

Saier, Milton H.; Trevors, Jack T.

2010-01-01T23:59:59.000Z

412

Negative Energy Solutions and Symmetries  

E-Print Network [OSTI]

We revisit the negative energy solutions of the Dirac equation, which become relevant at very high energies and study several symmetries which follow therefrom. The consequences are briefly examined.

Burra G. Sidharth

2011-04-01T23:59:59.000Z

413

Final Technical Report HFC Concrete: A Low-Ã?Â?Ã?Â?Ã?Â?Ã?­Ã?Â?Ã?¢Ã?Â?Ã?Â?Ã?Â?Ã?Energy, Carbon-Ã?Â?Ã?Â?Ã?Â?Ã?­Dioxide-Ã?Â?Ã?Â?Ã?Â?Ã?­Negative Solution for reducing Industrial Greenhouse Gas Emissions  

SciTech Connect (OSTI)

Solidia/CCSM received funding for further research and development of its Low Temperature Solidification Process (LTS), which is used to create hydrate-free concrete (HFC). LTS/HFC is a technology/materials platform that offers wide applicability in the built infrastructure. Most importantly, it provides a means of making concrete without Portland cement. Cement and concrete production is a major consumer of energy and source of industrial greenhouse gas (GHG) emissions. The primary goal of this project was to develop and commercialize a novel material, HFC, which by replacing traditional concrete and cement, reduces both energy use and GHG emissions in the built infrastructure. Traditional concrete uses Portland Cement (PC) as a binder. PC production involves calcination of limestone at {approx}1450 C, which releases significant amounts of CO{sub 2} gas to the atmosphere and consumes a large amount of energy due to the high temperature required. In contrast, HFC is a carbonate-based hydrate-free concrete (HFC) that consumes CO{sub 2} gas in its production. HFC is made by reaction of silicate minerals with CO{sub 2} at temperatures below 100 C, more than an order-of-magnitude below the temperature required to make PC. Because of this significant difference in temperature, it is estimated that we will be able to reduce energy use in the cement and concrete industry by up to 30 trillion Btu by 2020. Because of the insulating properties of HFC, we believe we will also be able to significantly reduce energy use in the Building sector, though the extent of this saving is not yet quantified. It is estimated that production of a tonne of PC-based concrete requires about 6.2 million Btu of energy and produces over 1 tonne of CO{sub 2} emissions (Choate, 2003). These can be reduced to 1.9 million Btu and 0.025 tonnes of CO{sub 2} emissions per tonne of HFC (with overall CO{sub 2}-negativity possible by increasing carbonation yield). In this way, by replacing PC-based concrete with HFC in infrastructure we can reduce energy use in concrete production by 70%, and reduce CO{sub 2} emissions by 98%; thus the potential to reduce the impact of building materials on global warming and climate change is highly significant. Low Temperature Solidification (LTS) is a breakthrough technology that enables the densification of inorganic materials via a hydrothermal process. The resulting product exhibits excellent control of chemistry and microstructure, to provide durability and mechanical performance that exceeds that of concrete or natural stone. The technology can be used in a wide range of applications including facade panels, interior tiles, roof tiles, countertops, and pre-cast concrete. Replacing traditional building materials and concrete in these applications will result in significant reduction in both energy consumption and CO{sub 2} emissions.

Dr. Larry McCandlish, Principal Investigator; Dr. Richard Riman, Co-Principal Investigator

2012-05-14T23:59:59.000Z

414

Tailored Recovery of Carbons from Waste Tires for Enhanced Performance as Anodes in Lithium-ion Batteries  

SciTech Connect (OSTI)

Morphologically tailored pyrolysis-recovered carbon black is utilized in lithium-ion batteries as a potential solution for adding value to waste tire-rubber-derived materials. Micronized tire rubber was digested in a hot oleum bath to yield a sulfonated rubber slurry that was then filtered, washed, and compressed into a solid cake. Carbon was recovered from the modified rubber cake by pyrolysis in a nitrogen atmosphere. The chemical pretreatment of rubber produced a carbon monolith with higher yield than that from the control (a fluffy tire-rubber-derived carbon black). The carbon monolith showed a very small volume fraction of pores of widths 3 4 nm, reduced specific surface area, and an ordered assembly of graphitic domains. Electrochemical studies on the recovered-carbon-based anode revealed an improved Li-ion battery performance with higher reversible capacity than that of commercial carbon materials. Anodes made with a sulfonated tire-rubber-derived carbon and a control tire-rubber-derived carbon, respectively, exhibited an initial coulombic efficiency of 80% and 45%, respectively. The reversible capacity of the cell with the sulfonated carbon as anode was 400 mAh/g after 100 cycles, with nearly 100% coulombic efficiency. Our success in producing higher performance carbon material from waste tire rubber for potential use in energy storage applications adds a new avenue to tire rubber recycling.

Naskar, Amit K [ORNL; Bi, [ORNL; Saha, Dipendu [ORNL; Chi, Miaofang [ORNL; Bridges, Craig A [ORNL; Paranthaman, Mariappan Parans [ORNL

2014-01-01T23:59:59.000Z

415

Carbonation Mechanism of Reservoir Rock by Supercritical Carbon Dioxide  

Broader source: Energy.gov [DOE]

Project Objectives: Elucidate comprehensively the carbonation reaction mechanisms between supercritical carbon dioxide (scCO2) and reservoir rocks consisting of different mineralogical compositions in aqueous and non-aqueous environments at temperatures of up to 250ºC, and to develop chemical modeling of CO2-reservior rock interactions.

416

Pyrolytic carbon electrodes Lithographically Defined Porous Carbon Electrodes**  

E-Print Network [OSTI]

to the intrinsic material properties of carbon, functionalized films can be produced through chemical modification fabrication method capable of producing large area (%100 s cm2 ) submicrometer porous carbon films. In our methodology. The palladium-modified electrodes exhibit a catalytic response for methanol oxidation

New Mexico, University of

417

Carbon dioxide and climate  

SciTech Connect (OSTI)

Scientific and public interest in greenhouse gases, climate warming, and global change virtually exploded in 1988. The Department's focused research on atmospheric CO{sub 2} contributed sound and timely scientific information to the many questions produced by the groundswell of interest and concern. Research projects summarized in this document provided the data base that made timely responses possible, and the contributions from participating scientists are genuinely appreciated. In the past year, the core CO{sub 2} research has continued to improve the scientific knowledge needed to project future atmospheric CO{sub 2} concentrations, to estimate climate sensitivity, and to assess the responses of vegetation to rising concentrations of CO{sub 2} and to climate change. The Carbon Dioxide Research Program's goal is to develop sound scientific information for policy formulation and governmental action in response to changes of atmospheric CO{sub 2}. The Program Summary describes projects funded by the Carbon Dioxide Research Program during FY 1990 and gives a brief overview of objectives, organization, and accomplishments.

Not Available

1990-10-01T23:59:59.000Z

418

CO2 Capture by Absorption with Potassium Carbonate  

SciTech Connect (OSTI)

The objective of this work is to improve the process for CO{sub 2} capture by alkanolamine absorption/stripping by developing an alternative solvent, aqueous K{sub 2}CO{sub 3} promoted by piperazine. Ethylenediamine was detected in a degraded solution of MEA/PZ solution, suggesting that piperazine is subject to oxidation. Stripper modeling has demonstrated that vacuum strippers will be more energy efficient if constructed short and fat rather than tall and skinny. The matrix stripper has been identified as a configuration that will significantly reduce energy use. Extensive measurements of CO{sub 2} solubility in 7 m MEA at 40 and 60 C have confirmed the work by Jou and Mather. Corrosion of carbon steel without inhibitors increases from 19 to 181 mpy in lean solutions of 6.2 m MEA/PZ as piperazine increases from 0 to 3.1 m.

Gary T. Rochelle; Eric Chen; Babatunde Oyenekan; Andrew Sexton; Jason Davis; Marcus Hilliard; Amornvadee Veawab

2006-09-30T23:59:59.000Z

419

PRODUCTION OF CARBON PRODUCTS USING A COAL EXTRACTION PROCESS  

SciTech Connect (OSTI)

This Department of Energy National Energy Technology Laboratory sponsored project developed carbon products, using mildly hydrogenated solvents to extract the organic portion of coal to create synthetic pitches, cokes, carbon foam and carbon fibers. The focus of this effort was on development of lower cost solvents, milder hydrogenation conditions and improved yield in order to enable practical production of these products. This technology is needed because of the long-term decline in production of domestic feedstocks such as petroleum pitch and coal tar pitch. Currently, carbon products represents a market of roughly 5 million tons domestically, and 19 million tons worldwide. Carbon products are mainly derived from feedstocks such as petroleum pitch and coal tar pitch. The domestic supply of petroleum pitch is declining because of the rising price of liquid fuels, which has caused US refineries to maximize liquid fuel production. As a consequence, the long term trend has a decline in production of petroleum pitch over the past 20 years. The production of coal tar pitch, as in the case of petroleum pitch, has likewise declined significantly over the past two decades. Coal tar pitch is a byproduct of metallurgical grade coke (metcoke) production. In this industry, modern metcoke facilities are recycling coal tar as fuel in order to enhance energy efficiency and minimize environmental emissions. Metcoke production itself is dependent upon the production requirements for domestic steel. Hence, several metcoke ovens have been decommissioned over the past two decades and have not been replaced. As a consequence sources of coal tar are being taken off line and are not being replaced. The long-term trend is a reduction in coal tar pitch production. Thus import of feedstocks, mainly from Eastern Europe and China, is on the rise despite the relatively large transportation cost. To reverse this trend, a new process for producing carbon products is needed. The process must be economically competitive with current processes, and yet be environmentally friendly as well. The solvent extraction process developed uses mild hydrogenation of low cost oils to create powerful solvents that can dissolve the organic portion of coal. The insoluble portion, consisting mainly of mineral matter and fixed carbon, is removed via centrifugation or filtration, leaving a liquid solution of coal chemicals and solvent. This solution can be further refined via distillation to meet specifications for products such as synthetic pitches, cokes, carbon foam and fibers. The most economical process recycles 85% of the solvent, which itself is obtained as a low-cost byproduct from industrial processes such as coal tar or petroleum refining. Alternatively, processes have been developed that can recycle 100% of the solvent, avoiding any need for products derived from petroleum or coal tar.

Dady Dadyburjor; Philip R. Biedler; Chong Chen; L. Mitchell Clendenin; Manoj Katakdaunde; Elliot B. Kennel; Nathan D. King; Liviu Magean; Peter G. Stansberry; Alfred H. Stiller; John W. Zondlo

2004-08-31T23:59:59.000Z

420

Intermediate Temperature Carbon - Carbon Composite Structures. CRADA Final Report  

SciTech Connect (OSTI)

The objective of this Cooperative Research and Development Agreement (CRADA) between UT-Battelle, LLC (the "Contractor") and Synterials, Inc. (the "Participant") was to demonstrate promising processing methods, which can lead to producing Carbon-Carbon Composites (CCC), with tensile and interlaminar properties comparable to those of organic matrix composites and environmental stability at 1200 F for long periods of time. The participant synthesized carbon-carbon composites with two different fiber coatings and three different matrices. Both parties evaluated the tensile and interlaminar properties of these materials and characterized the microstructure of the matrices and interfaces. It was found that fiber coatings of carbon and boron carbide provided the best environmental protection and resulted in composites with high tensile strength.

Lara-Curzio, Edgar [ORNL

2007-06-01T23:59:59.000Z

Note: This page contains sample records for the topic "ada carbon solutions" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

SciTech Connect: A Solution for Solution-Produced [beta]-FeSe...  

Office of Scientific and Technical Information (OSTI)

A Solution for Solution-Produced beta-FeSe: Elucidating and Overcoming Factors that Prevent Superconductivity Citation Details In-Document Search Title: A Solution for...

422

46 (2009-6) Nucleation of a single-walled carbon nanotube inside a carbon nanotube  

E-Print Network [OSTI]

of the metal-carbide. Key Words : Molecular Dynamics, Double-Walled Carbon Nanotube, Growth Mechanism, Carbon functions of carbon atoms and metal atoms in the metal carbide cluster #12;,10) Carbon (11,11) Carbon (15,6) Carbon (10,10) Metal (11,11) Metal (15,6) Metal Fig. 4 Density distribution

Maruyama, Shigeo

423

Carbon Dioxide Sequestration in Concrete Using Vacuum-Carbonation Alain Azar, Prof. Yixin Shao  

E-Print Network [OSTI]

Carbon Dioxide Sequestration in Concrete Using Vacuum-Carbonation Alain Azar, Prof. Yixin Shao promising carbon uptake results and is a viable option for carbonation curing. Carbon sequestration increase in Carbon dioxide (CO2) emissions over the past five decades, specific ways to reduce

Barthelat, Francois

424

University of Glasgow Carbon Management Programme Carbon Management Plan working with  

E-Print Network [OSTI]

carbon vision 11 2.3 Strategic themes 12 Targets and objectives 13 3 Emissions Baseline and Projections. Professor Anton Muscatelli, Principal Foreword from the Carbon Trust Cutting carbon emissions as partUniversity of Glasgow Carbon Management Programme Carbon Management Plan working with Page 1 Carbon

Mottram, Nigel

425

Modeling simple amphiphilic solutes in a Jagla solvent Zhiqiang Su, Sergey V. Buldyrev, Pablo G. Debenedetti, Peter J. Rossky, and H. Eugene Stanley  

E-Print Network [OSTI]

of phase equilibria and structure for dimethyl ether + sulfur dioxide and dimethyl ether + carbon dioxide J. Chem. Phys. 136, 044514 (2012) Reorientation dynamics of nanoconfined water: Power-law decay, hydrogen; published online 25 January 2012) Methanol is an amphiphilic solute whose aqueous solutions exhibit

Stanley, H. Eugene

426

Gas adsorption isotherm equation based on vacancy solution theory  

SciTech Connect (OSTI)

Pennsylvania State University's new isotherm equation for pure gas adsorption treats the adsorption equilbrium as an osmotic equilibrium between two ''vacancy'' solutions having different compositions. One solution represents the gas phase and the other the adsorbed phase. The vacancy solution is composed of adsorbates and vacancies (imaginary entities defined as the vacuum space that acts as the solvent for the system). Penn State evaluated the developed correlation against published adsorption-isotherm data for O/sub 2/, N/sub 2/, and CO on zeolite 10X and for light hydrocarbons (CH/sub 4/ to nC/sub 4/H/sub 10/) and CO/sub 2/ on Nuxit-AL activated carbon. For both adsorbents, the correlations were closer than those obtained by any other adsorption model that has been extended to gas mixtures. The new method can also represent multicomponent systems because the activity coefficient governing the nonideality of adsorbed mixtures can be readily calculated from binary parameters. These are obtained from single-component adsorption data by a procedure analogous to a bulk solution.

Suwanayuen, S.; Danner, R.P.

1980-01-01T23:59:59.000Z

427

ASSESSMENT OF BUILDING LIFECYLE CARBON EMISSIONS  

E-Print Network [OSTI]

Even though the Carbon Capture & Sequestration Technologies (CC & ST) program at the Massachusetts Institute of Technology initiated carbon emission research in late 1990s (CSI, 2013), carbon emissions has only become a hot topic in the last decade...

Kwok, George

2014-05-31T23:59:59.000Z

428

Carbon Dioxide Reduction Through Urban Forestry  

E-Print Network [OSTI]

. Retrieval Terms: urban forestry, carbon dioxide, sequestration, avoided energy The Authors E. Gregory McCarbon Dioxide Reduction Through Urban Forestry: Guidelines for Professional and Volunteer Tree; Simpson, James R. 1999. Carbon dioxide reduction through urban forestry

Standiford, Richard B.

429

Carbon Fiber Composite Cellular A Dissertation  

E-Print Network [OSTI]

Carbon Fiber Composite Cellular Structures ____________________________________ A Dissertation and honeycombs. However, for weight sensitive, ambient temperature applications, carbon fiber composites have emerged as a promising material due to its high specific strength and low density. Carbon fiber reinforced

Wadley, Haydn

430

Carbon Nanotubes: Bearing Stress Like Never Before  

E-Print Network [OSTI]

A.J. (2013). Carbon Nanotubes: Present and Future CommercialP.M. (2008). Carbon Nanotubes. A. Jorio, G. Dresselhaus, &V.N. (2004). Carbon Nanotubes: properties and application.

Limaye, Aditya

2013-01-01T23:59:59.000Z

431

Defects and Disorder in Carbon Nanotubes  

E-Print Network [OSTI]

Perebeinos, V. (2008) Carbon Nanotubes 111 423. Bachilo, S.P. L. (2008) Carbon Nanotubes 111 Biro, L. P. , Khanh, N.structure of carbon nanotubes. Fullerenes '96. Oxford, UK.

Collins, Philip G

2010-01-01T23:59:59.000Z

432

A synthesis of carbon in international trade  

E-Print Network [OSTI]

and Peters, G. P. : Carbon Footprint of Nations: A Global,analysis for na- tional carbon footprint accounting, Eco.study of the UK’s carbon footprint, Eco. Syst. Res. , 22,

Peters, G. P; Davis, S. J; Andrew, R.

2012-01-01T23:59:59.000Z

433

Carbon Nanotubes: Bearing Stress Like Never Before  

E-Print Network [OSTI]

of the mechanical properties of carbon nanotube– polymercomposites. Carbon, 44. 1624 – 1652 doi: 10.1016/j.R.H. , & Hart, A.J. (2013). Carbon Nanotubes: Present and

Limaye, Aditya

2013-01-01T23:59:59.000Z

434

Who Pays a Price on Carbon?  

E-Print Network [OSTI]

on a per-capita basis a carbon price is much more regressiveadverse distributional effects of a carbon emissions policy.Distributional incidence · Carbon tax · Tradable permits Q52

Grainger, Corbett A.; Kolstad, Charles D.

2010-01-01T23:59:59.000Z

435

Climate policy and dependence on traded carbon  

E-Print Network [OSTI]

of human development and carbon emissions embodied in trade03.html) Lo A Y 2012 Carbon emissions trading in Chinagoal is to regulate carbon emissions, then, because only a

Andrew, Robbie M; Davis, Steven J; Peters, Glen P

2013-01-01T23:59:59.000Z

436

Method for producing carbon nanotubes  

DOE Patents [OSTI]

Method for producing carbon nanotubes. Carbon nanotubes were prepared using a low power, atmospheric pressure, microwave-generated plasma torch system. After generating carbon monoxide microwave plasma, a flow of carbon monoxide was directed first through a bed of metal particles/glass beads and then along the outer surface of a ceramic tube located in the plasma. As a flow of argon was introduced into the plasma through the ceramic tube, ropes of entangled carbon nanotubes, attached to the surface of the tube, were produced. Of these, longer ropes formed on the surface portion of the tube located in the center of the plasma. Transmission electron micrographs of individual nanotubes revealed that many were single-walled.

Phillips, Jonathan (Santa Fe, NM); Perry, William L. (Jemez Springs, NM); Chen, Chun-Ku (Albuquerque, NM)

2006-02-14T23:59:59.000Z

437

Process for making hollow carbon spheres  

DOE Patents [OSTI]

A hollow carbon sphere having a carbon shell and an inner core is disclosed. The hollow carbon sphere has a total volume that is equal to a volume of the carbon shell plus an inner free volume within the carbon shell. The inner free volume is at least 25% of the total volume. In some instances, a nominal diameter of the hollow carbon sphere is between 10 and 180 nanometers.

Luhrs, Claudia C.; Phillips, Jonathan; Richard, Monique N.; Knapp, Angela Michelle

2013-04-16T23:59:59.000Z

438

Graphene: Materially Better Carbon  

SciTech Connect (OSTI)

Graphene, a single atom–thick plane of carbon atoms arranged in a honeycomb lattice, has captivated the attention of physicists, materials scientists, and engineers alike over the five years following its experimental isolation. Graphene is a fundamentally new type of electronic material whose electrons are strictly confined to a two-dimensional plane and exhibit properties akin to those of ultrarelativistic particles. Graphene's two-dimensional form suggests compatibility with conventional wafer processing technology. Extraordinary physical properties, including exceedingly high charge carrier mobility, current-carrying capacity, mechanical strength, and thermal conductivity, make it an enticing candidate for new electronic technologies both within and beyond complementary metal oxide semiconductors (CMOS). Immediate graphene applications include high-speed analog electronics and highly conductive, flexible, transparent thin films for displays and optoelectronics. Currently, much graphene research is focused on generating and tuning a bandgap and on novel device structures that exploit graphene's extraordinary electrical, optical, and mechanical properties.

Fuhrer, M. S.; Lau, C. N.; MacDonald, A. H.

2010-01-01T23:59:59.000Z

439

Carbonic Acid Shows Promise in Geology, Biology  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

The Surprising Secrets of Carbonic Acid Probing the Surprising Secrets of Carbonic Acid Berkeley Lab Study Holds Implications for Geological and Biological Processes October 23,...

440

Carbon Fiber Pilot Plant and Research Facilities  

Broader source: Energy.gov (indexed) [DOE]

for the U.S. Department of Energy Presentationname Carbon Fiber Facilities Materials Carbon Fiber Research Facility Type Production Fiber Types Tow Size Tensioning Line...

Note: This page contains sample records for the topic "ada carbon solutions" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Electrochemical implications of defects in carbon nanotubes  

E-Print Network [OSTI]

conducting polymer hybrid supercapacitors. Journal of Thestudies of carbon-carbon supercapacitors. Journal of TheHigh-voltage asymmetric supercapacitors operating in aqueous

Hoefer, Mark

2012-01-01T23:59:59.000Z

442

Metal supported carbon nanostructures for hydrogen storage.  

E-Print Network [OSTI]

??Carbon nanocones are the fifth equilibrium structure of carbon, first synthesized in 1997. They have been selected for investigating hydrogen storage capacity, because initial temperature… (more)

Matelloni, Paolo

2012-01-01T23:59:59.000Z

443

CFTF | Carbon Fiber Technology Facility | ORNL  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

BTRIC CNMS CSMB CFTF Working with CFTF HFIR MDF NTRC OLCF SNS Carbon Fiber Technology Facility Home | User Facilities | CFTF CFTF | Carbon Fiber Technology Facility SHARE Oak...

444

Speeding Up Zeolite Evaluation for Carbon Capture  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Speeding Up Zeolite Evaluation for Carbon Capture Speeding Up Zeolite Evaluation for Carbon Capture Zeolite.png Schematic of an important class of porous materials known as...

445

Carbon nanotubes : synthesis, characterization, and applications  

E-Print Network [OSTI]

Surface-Attached Carbon Nanotubes. Ind. Eng. Chem. Res. ,Structure of Carbon Nanotubes. Journal of Physical ChemistryP.G. and P. Avouris, Nanotubes for Electronics. Scientific

Deck, Christian Peter

2009-01-01T23:59:59.000Z

446

Functionalized carbon nanotubes and nanofibers for biosensing...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

carbon nanotubes and nanofibers for biosensing applications. Functionalized carbon nanotubes and nanofibers for biosensing applications. Abstract: This review summarizes the recent...

447

Carbon nanotubes : synthesis, characterization, and applications  

E-Print Network [OSTI]

of carbon nanotubes by transmission electron energy-lossEnergy Gaps in "Metallic" Single-Walled Carbon Nanotubes.nanotubes, absorbance increases with increasing light energy

Deck, Christian Peter

2009-01-01T23:59:59.000Z

448

Case Study: Transcritical Carbon Dioxide Supermarket Refrigeration...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Case Study: Transcritical Carbon Dioxide Supermarket Refrigeration Systems Case Study: Transcritical Carbon Dioxide Supermarket Refrigeration Systems This case study documents one...

449

California Low Carbon Fuels Infrastructure Investment Initiative...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Low Carbon Fuels Infrastructure Investment Initiative California Low Carbon Fuels Infrastructure Investment Initiative 2012 DOE Hydrogen and Fuel Cells Program and Vehicle...

450

Robust carbon monolith having hierarchical porosity  

DOE Patents [OSTI]

A carbon monolith includes a robust carbon monolith characterized by a skeleton size of at least 100 nm, and a hierarchical pore structure having macropores and mesopores.

Dai, Sheng; Guiohon, Georges A; Liang, Chengdu

2013-02-05T23:59:59.000Z

451

Robust carbon monolith having hierarchical porosity  

SciTech Connect (OSTI)

A carbon monolith includes a robust carbon monolith characterized by a skeleton size of at least 100 nm, and a hierarchical pore structure having macropores and mesopores.

Dai, Sheng; Guiochon, Georges A; Liang, Chengdu

2014-01-14T23:59:59.000Z

452

Energy-Related Carbon Emissions in Manufacturing  

Reports and Publications (EIA)

Energy-related carbon emissions in manufacturing analysis and issues related to the energy use, energy efficiency, and carbon emission indicators.

2000-01-01T23:59:59.000Z

453

UCSF Sustainability Baseline Assessment: Carbon Footprint Analysis  

E-Print Network [OSTI]

UCSF Sustainability Baseline Assessment: Carbon Footprint Analysis Final Issue Date: March 21, 2010 #12;Carbon Footprint Analysis Background This chapter of the Sustainability Assessment focuses on UCSF

Yamamoto, Keith

454

Who Pays a Price on Carbon?  

E-Print Network [OSTI]

that a fully auctioned emissions trading program (with aof a carbon tax or emissions trading system (Fullertona carbon tax or emissions trading system may have exemptions

Grainger, Corbett A.; Kolstad, Charles D.

2010-01-01T23:59:59.000Z

455

Numerical simulation and modeling of carbon nanotubes.  

E-Print Network [OSTI]

??The discovery of carbon nanotubes has triggered a significant amount of interest. Since then, much research has been done on these new forms of carbon… (more)

Wong, Chee How.

2008-01-01T23:59:59.000Z

456

CHEMICAL MODIFICATION AND CHARACTERIZATION OF CARBON NANOTUBES.  

E-Print Network [OSTI]

??Carbon nanotubes (CNTs) are a relatively new allotrope of carbon that possess very unique and exciting physical characteristics. However, much is still unknown regarding their… (more)

Cassity, Kelby Brandan

2010-01-01T23:59:59.000Z

457

Economics of geological sequestration and carbon management.  

E-Print Network [OSTI]

??In this carbon-constrained world, carbon management options for climate change mitigation are becoming increasingly important, especially in China, one of the largest energy consuming and… (more)

Su, Hui, 1976-

2010-01-01T23:59:59.000Z

458

CARBON SEQUESTRATION IN NATURAL AND CREATED WETLANDS.  

E-Print Network [OSTI]

?? Wetland ecosystems are significant carbon sinks. Their high productivity and presence of water gives them the ability to efficiently sequester carbon in the soil,… (more)

Bernal, Blanca

2012-01-01T23:59:59.000Z

459

Noncovalently functionalized graphitic mesoporous carbon as a...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

functionalized graphitic mesoporous carbon as a stable support of Pt nanoparticles for oxygen reduction. Noncovalently functionalized graphitic mesoporous carbon as a stable...

460

Contraction & Convergence: UK carbon emissions and the  

E-Print Network [OSTI]

the EU's emissions trading scheme will do little to mitigate carbon emissions 4) Aviation growth must emissions. Keywords Contraction & Convergence; aviation; emissions trading; passengers; carbon dioxide #12

Watson, Andrew

Note: This page contains sample records for the topic "ada carbon solutions" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

New Zealand Joins International Carbon Storage Group  

Broader source: Energy.gov [DOE]

The Carbon Sequestration Leadership Forum today announced that New Zealand has become the newest member of the international carbon storage body.

462

Hydrogen Adsorption Induces Interlayer Carbon Bond Formation...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Hydrogen Adsorption Induces Interlayer Carbon Bond Formation in Supported Few-Layer Graphene Friday, February 28, 2014 Among the allotropes of carbon, diamond has some of the most...

463

Electrical Transport in Carbon Nanotubes and Graphene  

E-Print Network [OSTI]

Introduction to Carbon Nanotubes and Graphene Single wallCarbon nanotubes and graphene are the most popular Carbonin the Normal Metal – Graphene – Superconductor Junctions

Liu, Gang

2010-01-01T23:59:59.000Z

464

Carbon Sequestration Documentary Wins Coveted Aurora Award |...  

Broader source: Energy.gov (indexed) [DOE]

Carbon Sequestration Documentary Wins Coveted Aurora Award Carbon Sequestration Documentary Wins Coveted Aurora Award August 26, 2009 - 1:00pm Addthis Washington, D.C. -- A film...

465

Optimize carbon dioxide sequestration, enhance oil recovery  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Optimize carbon dioxide sequestration, enhance oil recovery Optimize carbon dioxide sequestration, enhance oil recovery The simulation provides an important approach to estimate...

466

GEOLOGIC CARBON SEQUESTRATION STRATEGIES FOR CALIFORNIA  

E-Print Network [OSTI]

CALIFORNIA ENERGY COMMISSION GEOLOGIC CARBON SEQUESTRATION STRATEGIES FOR CALIFORNIA to extend our thanks to the authors of various West Coast Regional Carbon Sequestration Partnership

467

Optimize carbon dioxide sequestration, enhance oil recovery  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Optimize carbon dioxide sequestration, enhance oil recovery The simulation provides an important approach to estimate the potential of storing carbon dioxide in depleted oil fields...

468

Prospects for Enhancing Carbon Sequestration and Reclamation...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Prospects for Enhancing Carbon Sequestration and Reclamation of Degraded Lands with Fossil-fuel Combustion By-products. Prospects for Enhancing Carbon Sequestration and Reclamation...

469

Carbon and carbon monoxide hydrogenation on nickel: support effects  

SciTech Connect (OSTI)

Hydrogenation of carbon, deposited on nickel catalysts by CO disproportionation, was investigated by temperature-programmed surface reaction (TPSR) for four oxide supports, alumina (Al/sub 2/O/sub 3/), silica (SiO/sub 2/), titanium oxide (TiO/sub 2/), and SiO/sub 2/.Al/sub 2/O/sub 3/. The rate of carbon monoxide hydrogenation was measured by temperature-programmed reaction (TPR) for comparison. The rate of carbon hydrogenation to methane was found to be independent of the support and an average activation energy of 42 kJ/mol was estimated. In contrast, the rate of carbon monoxide hydrogenation was very sensitive to the catalyst support. Nickel (Ni) supported on TiO/sub 2/ exhibited the highest specific activity, and two distinct sites for methanation were observed on Ni/TiO/sub 2/ and Ni/Al/sub 2/O/sub 3/. The lowest specific activities were observed for Ni/SiO/sub 2/ and Ni/SiO/sub 2/.Al/sub 2/O/sub 3/. For all catalysts, carbon hydrogenation occurred at a lower temperature than carbon monoxide hydrogenation. For both TPR and TPSR, small amounts of ethane were formed and at a lower temperature than methane. The amount of less-active, ..beta..-carbon observed in TPSR experiments was very small on all catalysts. These results indicate that at high coverages, carbon hydrogenation does not depend on the support, and thus it is not rate-determining for CO hydrogenation in excess hydrogen. The support is also shown to change the specific rate of carbon monoxide methanation; activity differences seen in steady-state experiments are not just due to differences in site densities. 5 figures, 5 tables.

Ozdogan, S.Z.; Gochis, P.D.; Falconer, J.L.

1983-10-01T23:59:59.000Z

470

Project Management Plan Solution Stabilization  

SciTech Connect (OSTI)

This plan presents the overall objectives, description, justification and planning for the Plutonium Finishing Plant (PFP) Solutions Stabilization subproject. The intent of this plan is to describe how this project will be managed and integrated with other facility stabilization and deactivation activities. This plan supplements the overall integrated plan presented in the Integrated Project Management Plan (IPMP) for the Plutonium Finishing Plant Stabilization and Deactivation Project, HNF-3617. This project plan is the top-level definitive project management document for the PFP Solution Stabilization subproject. It specifies the technical, schedule, requirements and the cost baselines to manage the execution of the Solution Stabilization subproject. Any deviations to the document must be authorized through the appropriate change control process.

SATO, P.K.

1999-08-31T23:59:59.000Z

471

Interested Parties - Energy Solutions | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

- Energy Solutions EnergySolutions.pdf More Documents & Publications Interested Parties - NRG Energy Interested Parties - Myriant Interested Parties - 1603 Program Discussion...

472

Funding Opportunity Webinar - Advancing Solutions To Improve...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Funding Opportunity Webinar - Advancing Solutions To Improve the Energy Efficiency of US Commercial Buildings Funding Opportunity Webinar - Advancing Solutions To Improve the...

473

ITP Aluminum: Aluminum Industry Vision: Sustainable Solutions...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Aluminum Industry Vision: Sustainable Solutions for a Dynamic World ITP Aluminum: Aluminum Industry Vision: Sustainable Solutions for a Dynamic World alumvision.pdf More Documents...

474

Webinar Presentation: Energy Storage Solutions for Microgrids...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Presentation: Energy Storage Solutions for Microgrids (November 2012) Webinar Presentation: Energy Storage Solutions for Microgrids (November 2012) On November 7, 2012, Clean...

475

Blueprint for Sustainability - Sustainable Solutions for Every...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Blueprint for Sustainability - Sustainable Solutions for Every Consumer Blueprint for Sustainability - Sustainable Solutions for Every Consumer Highlights of Ford's near, mid, and...

476

Effect of silicate modulus and metakaolin incorporation on the carbonation of alkali silicate-activated slags  

SciTech Connect (OSTI)

Accelerated carbonation is induced in pastes and mortars produced from alkali silicate-activated granulated blast furnace slag (GBFS)-metakaolin (MK) blends, by exposure to CO{sub 2}-rich gas atmospheres. Uncarbonated specimens show compressive strengths of up to 63 MPa after 28 days of curing when GBFS is used as the sole binder, and this decreases by 40-50% upon complete carbonation. The final strength of carbonated samples is largely independent of the extent of metakaolin incorporation up to 20%. Increasing the metakaolin content of the binder leads to a reduction in mechanical strength, more rapid carbonation, and an increase in capillary sorptivity. A higher susceptibility to carbonation is identified when activation is carried out with a lower solution modulus (SiO{sub 2}/Na{sub 2}O ratio) in metakaolin-free samples, but this trend is reversed when metakaolin is added due to the formation of secondary aluminosilicate phases. High-energy synchrotron X-ray diffractometry of uncarbonated paste samples shows that the main reaction products in alkali-activated GBFS/MK blends are C-S-H gels, and aluminosilicates with a zeolitic (gismondine) structure. The main crystalline carbonation products are calcite in all samples and trona only in samples containing no metakaolin, with carbonation taking place in the C-S-H gels of all samples, and involving the free Na{sup +} present in the pore solution of the metakaolin-free samples. Samples containing metakaolin do not appear to have the same availability of Na{sup +} for carbonation, indicating that this is more effectively bound in the presence of a secondary aluminosilicate gel phase. It is clear that claims of exceptional carbonation resistance in alkali-activated binders are not universally true, but by developing a fuller mechanistic understanding of this process, it will certainly be possible to improve performance in this area.

Bernal, Susan A., E-mail: susana.bernal@gmail.co [Materials Engineering Department, Composite Materials Group, CENM, Universidad del Valle, Cali (Colombia); Mejia de Gutierrez, Ruby [Materials Engineering Department, Composite Materials Group, CENM, Universidad del Valle, Cali (Colombia); Provis, John L., E-mail: jprovis@unimelb.edu.a [Department of Chemical and Biomolecular Engineering, University of Melbourne, Victoria 3010 (Australia); Rose, Volker [Advanced Photon Source, Argonne National Laboratory, Argonne, Illinois 60439 (United States)

2010-06-15T23:59:59.000Z

477

Gravitational duality and rotating solutions  

SciTech Connect (OSTI)

We study how gravitational duality acts on rotating solutions, using the Kerr-NUT black hole as an example. After properly reconsidering how to take into account both electric (i.e. masslike) and magnetic (i.e. NUT-like) sources in the equations of general relativity, we propose a set of definitions for the dual Lorentz charges. We then show that the Kerr-NUT solution has nontrivial such charges. Further, we clarify in which respect Kerr's source can be seen as a mass M with a dipole of NUT charges.

Argurio, Riccardo; Dehouck, Francois [Physique Theorique et Mathematique and International Solvay Institutes, Universite Libre de Bruxelles, C.P. 231, 1050 Bruxelles (Belgium)

2010-03-15T23:59:59.000Z

478

SYNTHESIS AND CHARACTERIZATION OF CARBON AEROGEL NANOCOMPOSITES CONTAINING DOUBLE-WALLED CARBON NANOTUBES  

SciTech Connect (OSTI)

Carbon aerogels (CAs) are novel mesoporous materials with applications such as electrode materials for super capacitors and rechargeable batteries, adsorbents and advanced catalyst supports. To expand the potential application for these unique materials, recent efforts have focused on the design of CA composites with the goal of modifying the structure, conductivity or catalytic activity of the aerogel. Carbon nanotubes (CNTs) possess a number of intrinsic properties that make them promising materials in the design of composite materials. In addition, the large aspect ratios (100-1000) of CNTs means that small additions (less than 1 vol%) of CNTs can produce a composite with novel properties. Therefore, the homogeneous incorporation of CNTs into a CA matrix provides a viable route to new carbon-based composites with enhanced thermal, electrical and mechanical properties. One of the main challenges in preparing CNT composites is achieving a good uniform dispersion of nanotubes throughout the matrix. CAs are typically prepared through the sol-gel polymerization of resorcinol with formaldehyde in aqueous solution to produce organic gels that are supercritically dried and subsequently pyrolyzed in an inert atmosphere. Therefore, a significant issue in fabricating CA-CNT composites is dispersing the CNTs in the aqueous reaction media. Previous work in the design of CACNT composites have addressed this issue by using organic solvents in the sol-gel reaction to facilitate dispersion of the CNTs. To our knowledge, no data has been published involving the preparation of CA composites containing CNTs dispersed in aqueous media. In this report, we describe a new method for the synthesis of monolithic CA-CNT composites that involves the sol-gel polymerization of resorcinol and formaldehyde in an aqueous solution containing a surfactant-stabilized dispersion of double-walled carbon nanotubes (DWNT). One of the advantages of this approach is that it allows one to uniformly distribute CNTs in the CA matrix without compromising the synthetic control that is afforded by traditional organic sol-gel chemistry over the CA structure. We will describe the physical characterization of these novel materials as well as the influence of DWNT loading on the electrical conductivity of the CA composite.

Worsley, M A; Satcher, J H; Baumann, T F

2008-03-11T23:59:59.000Z

479

Tritium recovery from carbon particulate Until 2009 the JET machine has operated with a  

E-Print Network [OSTI]

objectives Design and construction of a facility to recover tritium from carbon. Including: · Commissioning of the material. case study DT fuel cycle Solution Significant R&D effort went into developing an oxidation: technologyservices@ccfe.ac.uk www.ccfe.ac.uk/technologyservices.aspx Recovery system during construction #12;

480

Structural micro-porous carbon anode for rechargeable lithium-ion batteries  

DOE Patents [OSTI]

A secondary battery having a rechargeable lithium-containing anode, a cathode and a separator positioned between the cathode and anode with an organic electrolyte solution absorbed therein is provided. The anode comprises three-dimensional microporous carbon structures synthesized from polymeric high internal phase emulsions or materials derived from this emulsion source, i.e., granules, powders, etc.

Delnick, Frank M. (Albuquerque, NM); Even, Jr., William R. (Livermore, CA); Sylwester, Alan P. (Washington, DC); Wang, James C. F. (Livermore, CA); Zifer, Thomas (Manteca, CA)

1995-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "ada carbon solutions" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

TOWARD DEADLINE AWARE LOW CARBON SUPPLY CHAIN Amirreza Tahamtan, A Min Tjoa  

E-Print Network [OSTI]

solutions have the potential of reducing global green- house gases by 15%. In addition to the ecological and moving toward a low carbon economy is the great challenge of our time. Aside from the ecological impact technological challenge of our time is tackling climate change with its ecological, economical, social

482

Structural micro-porous carbon anode for rechargeable lithium-ion batteries  

DOE Patents [OSTI]

A secondary battery having a rechargeable lithium-containing anode, a cathode and a separator positioned between the cathode and anode with an organic electrolyte solution absorbed therein is provided. The anode comprises three-dimensional microporous carbon structures synthesized from polymeric high internal phase emulsions or materials derived from this emulsion source, i.e., granules, powders, etc. 6 figs.

Delnick, F.M.; Even, W.R. Jr.; Sylwester, A.P.; Wang, J.C.F.; Zifer, T.

1995-06-20T23:59:59.000Z

483

Gas permeability of carbon aerogels  

SciTech Connect (OSTI)

Carbon aerogels are synthesized via the aqueous polycondensation of resorcinol with formaldehyde, followed by supercritical drying and subsequent pyrolysis at 1050 [degree]C. As a result of their interconnected porosity, ultrafine cell/pore size, and high surface area, carbon aerogels have many potential applications such as supercapacitors, battery electrodes, catalyst supports, and gas filters. The performance of carbon aerogels in the latter two applications depends on the permeability or gas flow conductance in these materials. By measuring the pressure differential across a thin specimen and the nitrogen gas flow rate in the viscous regime, the permeability of carbon aerogels was calculated from equations based upon Darcy's law. Our measurements show that carbon aerogels have permeabilities on the order of 10[sup [minus]12] to 10[sup [minus]10] cm[sup 2] over the density range from 0.05--0.44 g/cm[sup 3]. Like many other aerogel properties, the permeability of carbon aerogels follows a power law relationship with density, reflecting differences in the average mesopore size. Comparing the results from this study with the permeability of silica aerogels reported by other workers, we found that the permeability of aerogels is governed by a simple universal flow equation. This paper discusses the relationship between permeability, pore size, and density in carbon aerogels.

Kong, F.; LeMay, J.D.; Hulsey, S.S.; Alviso, C.T.; Pekala, R.W. (Chemistry and Materials Science Department, Lawrence Livermore National Laboratory, Livermore, California 94550 (United States))

1993-12-01T23:59:59.000Z

484

Americium/Lanthanide Separations in Alkaline Solutions for Advanced Nuclear Fuel Cycles  

SciTech Connect (OSTI)

Project goals: Can used nuclear fuel be partitioned by dissolution in alkaline aqueous solution to give a solution of uranium, neptunium, plutonium, americium and curium and a filterable solid containing nearly all of the lanthanide fission products and certain other fission products? What is the chemistry of Am/Cm/Ln in oxidative carbonate solutions? Can higher oxidation states of Am be stabilized and exploited? Conclusions: Am(VI) is kinetically stable in 0.5-2.0 M carbonate solutions for hours. Aliquat 336 in toluene has been successfully shown to extract U(VI) and Pu(VI) from carbonate solutions. (Stepanov et al 2011). Higher carbonate concentration gives lower D, SF{sub U/Eu} for = 4 in 1 M K{sub 2}CO{sub 3}. Experiments with Am(VI) were unsuccessful due to reduction by the organics. Multiple sources of reducing organics...more optimization. Reduction experiments of Am(VI) in dodecane/octanol/Aliquat 336 show that after 5 minutes of contact, only 30-40% of the Am(VI) has been reduced. Long enough to perform an extraction. Shorter contact times, lower T, and lower Aliquat 336 concentration still did not result in any significant extraction of Am. Anion exchange experiments using a strong base anion exchanger show uptake of U(VI) with minimal uptake of Nd(III). Experiments with Am(VI) indicate Am sorption with a Kd of 9 (10 minute contact) but sorption mechanism is not yet understood. SF{sub U/Nd} for = 7 and SF{sub U/Eu} for = 19 after 24 hours in 1 M K{sub 2}CO{sub 3}.

Goff, George S. [Los Alamos National Laboratory; Long, Kristy Marie [Los Alamos National Laboratory; Reilly, Sean D. [Los Alamos National Laboratory; Jarvinen, Gordon D. [Los Alamos National Laboratory; Runde, Wolfgang H. [Los Alamos National Laboratory

2012-06-11T23:59:59.000Z

485

Method for fabricating composite carbon foam  

DOE Patents [OSTI]

Carbon aerogels used as a binder for granularized materials, including other forms of carbon and metal additives, are cast onto carbon or metal fiber substrates to form composite carbon thin film sheets. The thin film sheets are utilized in electrochemical energy storage applications, such as electrochemical double layer capacitors (aerocapacitors), lithium based battery insertion electrodes, fuel cell electrodes, and electrocapacitive deionization electrodes. The composite carbon foam may be formed by prior known processes, but with the solid particles being added during the liquid phase of the process, i.e. prior to gelation. The other forms of carbon may include carbon microspheres, carbon powder, carbon aerogel powder or particles, graphite carbons. Metal and/or carbon fibers may be added for increased conductivity. The choice of materials and fibers will depend on the electrolyte used and the relative trade off of system resistivity and power to system energy.

Mayer, Steven T. (San Leandro, CA); Pekala, Richard W. (Pleasant Hill, CA); Kaschmitter, James L. (Pleasanton, CA)

2001-01-01T23:59:59.000Z

486

Capacitor with a composite carbon foam electrode  

DOE Patents [OSTI]

Carbon aerogels used as a binder for granularized materials, including other forms of carbon and metal additives, are cast onto carbon or metal fiber substrates to form composite carbon thin film sheets. The thin film sheets are utilized in electrochemical energy storage applications, such as electrochemical double layer capacitors (aerocapacitors), lithium based battery insertion electrodes, fuel cell electrodes, and electrocapacitive deionization electrodes. The composite carbon foam may be formed by prior known processes, but with the solid partides being added during the liquid phase of the process, i.e. prior to gelation. The other forms of carbon may include carbon microspheres, carbon powder, carbon aerogel powder or particles, graphite carbons. Metal and/or carbon fibers may be added for increased conductivity. The choice of materials and fibers will depend on the electrolyte used and the relative trade off of system resistivity and power to system energy.

Mayer, Steven T. (San Leandro, CA); Pekala, Richard W. (Pleasant Hill, CA); Kaschmitter, James L. (Pleasanton, CA)

1999-01-01T23:59:59.000Z

487

Capacitor with a composite carbon foam electrode  

DOE Patents [OSTI]

Carbon aerogels used as a binder for granularized materials, including other forms of carbon and metal additives, are cast onto carbon or metal fiber substrates to form composite carbon thin film sheets. The thin film sheets are utilized in electrochemical energy storage applications, such as electrochemical double layer capacitors (aerocapacitors), lithium based battery insertion electrodes, fuel cell electrodes, and electrocapacitive deionization electrodes. The composite carbon foam may be formed by prior known processes, but with the solid particles being added during the liquid phase of the process, i.e. prior to gelation. The other forms of carbon may include carbon microspheres, carbon powder, carbon aerogel powder or particles, graphite carbons. Metal and/or carbon fibers may be added for increased conductivity. The choice of materials and fibers will depend on the electrolyte used and the relative trade off of system resistivity and power to system energy. 1 fig.

Mayer, S.T.; Pekala, R.W.; Kaschmitter, J.L.

1999-04-27T23:59:59.000Z

488

Solutions  

E-Print Network [OSTI]

Feb 16, 2012 ... Calculate the accumulated value of this annuity at the end of 5 years .... The Net Present Value of this project at 10% interest is 280,026.06 .

489

Solutions  

E-Print Network [OSTI]

10000= yields 2133.18 (Using BA 35 Solar keystrokes are AC/ON (to clear registers) ... In this question, first layer gives a value of 1/i (=PV of level perpetuity of 1 ...

CJordan

2005-09-19T23:59:59.000Z

490

Carbon films produced from ionic liquid carbon precursors  

DOE Patents [OSTI]

The invention is directed to a method for producing a film of porous carbon, the method comprising carbonizing a film of an ionic liquid, wherein the ionic liquid has the general formula (X.sup.+a).sub.x(Y.sup.-b).sub.y, wherein the variables a and b are, independently, non-zero integers, and the subscript variables x and y are, independently, non-zero integers, such that ax=by, and at least one of X.sup.+ and Y.sup.- possesses at least one carbon-nitrogen unsaturated bond. The invention is also directed to a composition comprising a porous carbon film possessing a nitrogen content of at least 10 atom %.

Dai, Sheng; Luo, Huimin; Lee, Je Seung

2013-11-05T23:59:59.000Z

491

Carbon dioxide hydrate particles for ocean carbon sequestration  

E-Print Network [OSTI]

This paper presents strategies for producing negatively buoyant CO[subscript 2] hydrate composite particles for ocean carbon sequestration. Our study is based on recent field observations showing that a continuous-jet ...

Chow, A.C.

492

Atmospheric carbon dioxide and the global carbon cycle  

SciTech Connect (OSTI)

This state-of-the-art volume presents discussions on the global cycle of carbon, the dynamic balance among global atmospheric CO2 sources and sinks. Separate abstracts have been prepared for the individual papers. (ACR)

Trabalka, J R [ed.

1985-12-01T23:59:59.000Z

493

Carbon-Optimal and Carbon-Neutral Supply Chains  

E-Print Network [OSTI]

that the focus in the life-cycle assessment (LCA) and carbonclosely related to life-cycle assessment (LCA). The existingsupply chains, and on life-cycle assessment (LCA) and carbon

Caro, F.; Corbett, C. J.; Tan, T.; Zuidwijk, R.

2011-01-01T23:59:59.000Z

494

Carbon Efficiency, Carbon Reduction Potential, and Economic Developmen...  

Open Energy Info (EERE)

happen in any modernization process of any economy. Other factors, such as changes in the energy mix or sectoral changes in an economy, can also cause movements in carbon intensity...

495

Measuring supply chain carbon efficiency : a carbon label framework  

E-Print Network [OSTI]

In the near term, efficiency improvements represent a key option for reducing the impacts of climate change. The growing awareness of climate change has increased the attention regarding the carbon emissions "embedded" in ...

Craig, Anthony (Anthony J.)

2012-01-01T23:59:59.000Z

496

Ozone decomposition in water solutions  

E-Print Network [OSTI]

. Hewes, III; B. S. , Texas ASH University Directed by Dr. R. R. Davison The rate of the decomposition of ozone in water solutions at various pH's and temperatures were ob- tained by an iodometrical method. The orders of the reactions and the reaction...

Hewes, Cecil Grayson

1969-01-01T23:59:59.000Z

497

Kampung Capacity Local Solutions for  

E-Print Network [OSTI]

Kampung Capacity Local Solutions for Sustainable Rural Energy in the Baram River Basin, Sarawak with a large-scale hydropower plan for the river basin. Keywords: South East Asia, Malaysia, Rural Energy In this study we explore the potential for rural renewable energy supply through a focus on villages

Kammen, Daniel M.

498

Method for separating constituents from solution employing a recyclable Lewis acid metal-hydroxy gel  

SciTech Connect (OSTI)

This invention permits radionuclides, heavy metals, and organics to be extracted from solution by scavenging them with an amorphous gel. In the preferred embodiment, a contaminated solution (e.g. from soil washing, decontamination, or groundwater pumping) is transferred to a reaction vessel. The contaminated solution is contacted by the sequestering reagent which might contain for example, aluminate and EDTA anions in a 2.5 M NaOH solution. The pH of the reagent bearing solution is lowered on contact with the contaminated solution, or for example by bubbling carbon dioxide through it, causing an aluminum hydroxide gel to precipitate as the solution drops below the range of 1.8 to 2.5 molar NaOH (less than pH 14). This precipitating gel scavenges waste contaminants as it settles through solution leaving a clean supernatant which is then separated from the gel residue by physical means such as centrifugation, or simple settling. The gel residue containing concentrated contaminants is then redissolved releasing contaminants for separations and processing. This is a critical point: the stabilized gel used in this invention is readily re-dissolved by merely increasing the pH above the gels phase transition to aqueous anions. Thus, concentrated contaminants trapped in the gel can be released for convenient separation from the sequestering reagent, and said reagent can then be recycled.

Alexander, D.H.

1995-12-31T23:59:59.000Z

499

Energy solutions?Director Eric Isaacs  

ScienceCinema (OSTI)

Argonne's Director Eric Isaacs talks about the laboratory's efforts for creating new, clean energy solutions.

Eric ISaacs

2013-06-05T23:59:59.000Z

500

Energy solutions—Director Eric Isaacs  

SciTech Connect (OSTI)

Argonne's Director Eric Isaacs talks about the laboratory's efforts for creating new, clean energy solutions.

Eric ISaacs

2012-08-08T23:59:59.000Z