National Library of Energy BETA

Sample records for ad min istra

  1. via Spence St 39 min

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    via Spence St 39 min

  2. min-98.pdf

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Comparison of Model-Predicted Total Shortwave with Measurements Under Overcast Cloud Conditions Q. Min and L. C. Harrison Atmospheric Sciences Research Center State University of New York at Albany Albany, New York Abstract We use surface measurements at the Atmospheric Radiation Measurement (ARM) Southern Great Plains (SGP) site made with the multifilter rotating shadowband radiometer (MFRSR) and microwave radiometer (MWR) to obtain time-series of cloud optical depths and mean effective droplet

  3. min-99.PDF

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Joint Statistics of Photon Pathlength and Cloud Optical Depth Q.-L. Min and L. C. Harrison Atmospheric Sciences Research Center State University of New York Albany, New York Abstract A mean pressure- and temperature-weighted photon pathlength in the atmosphere can be inferred from moderate resolution measurements in the O 2 A-band. We show a pathlength retrieval method and calibration results for measurements from a Rotating Shadowband Spectroradiometer (RSS), and present the joint statistics of

  4. Min Chen | Photosynthetic Antenna Research Center

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Min Chen Min Chen Min Chen Min Chen Research Affiliate E-mail: min.chen@sydney.edu.au Phone: +61 2 9036 5006 Fax: +61 2 9351 4119 Website: University of Sydney Research Affiliate...

  5. Xiao-Min Lin | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Xiao-Min Lin Scientist & Joint Staff, James Franck Institute, University of Chicago Postdoc, James Franck Institute, University of Chicago (2000-2002) Ph.D. Condensed Matter...

  6. ARM - VAP Product - mfrsrcldod1min

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Productsmfrsrcldodmfrsrcldod1min Documentation Technical Report Data Management Facility Plots (Quick Looks) Citation DOI: 10.5439/1027296 [ What is this? ] Generate Citation ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send VAP Output : MFRSRCLDOD1MIN Derived: Cloud Optical Properties from MFRSR, MWR, Langley Analysis Active Dates 1997.08.21 - 2016.06.01 Originating VAP Process Cloud Optical Properties from MFRSR

  7. ARM: Temperature Profiles from Raman Lidar at 60-min averaging...

    Office of Scientific and Technical Information (OSTI)

    Citation Details In-Document Search Title: ARM: Temperature Profiles from Raman Lidar at 60-min averaging interval Temperature Profiles from Raman Lidar at 60-min averaging ...

  8. ARM: Temperature Profiles from Raman Lidar at 10-min averaging...

    Office of Scientific and Technical Information (OSTI)

    Temperature Profiles from Raman Lidar at 10-min averaging interval Title: ARM: Temperature Profiles from Raman Lidar at 10-min averaging interval Temperature Profiles from Raman ...

  9. MinWind I & II Wind Farm | Open Energy Information

    Open Energy Info (EERE)

    I & II Wind Farm Jump to: navigation, search Name MinWind I & II Wind Farm Facility MinWind I & II Sector Wind energy Facility Type Commercial Scale Wind Facility Status In Service...

  10. Incorporating the min-max mesh optimization method within the...

    Office of Scientific and Technical Information (OSTI)

    Incorporating the min-max mesh optimization method within the Target-Matrix Paradigm. ... Country of Publication: United States Language: English Word Cloud More Like This Full ...

  11. Incorporating the min-max mesh optimization method within the...

    Office of Scientific and Technical Information (OSTI)

    Title: Incorporating the min-max mesh optimization method within the Target-Matrix ... Country of Publication: United States Language: English Word Cloud More Like This Full ...

  12. Min-kota Fisheries Aquaculture Low Temperature Geothermal Facility...

    Open Energy Info (EERE)

    Facility Min-kota Fisheries Sector Geothermal energy Type Aquaculture Location Philip, South Dakota Coordinates 44.0394329, -101.6651441 Show Map Loading map......

  13. Microsoft Word - EM SSAB Spring 2010 Mtg Min.063010

    Office of Environmental Management (EM)

    ... Decision SC - Office of Science SNF - Spent Nuclear Fuel SNM - Spent Nuclear Material SSAB - ... He added that at two public meetings on the subject, panels agreed that a period of ...

  14. Ad Lucem Workshop Welcome

    Broader source: Energy.gov [DOE]

    This presentation summarizes the information given by DOE during the DOE Ad Lucem workshop, Feb. 17, 2012.

  15. Retiree AD&D Insurance

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AD&D Insurance Retiree AD&D Insurance AD&D coverage during retirement. Contact Retiree Insurance Providers Accidental death & dismemberment (AD&D) benefits for retirees The AD&D...

  16. Ad Lucem Workshop Welcome

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    I was a sorry witness of such doings, knowing that a little theory and calculation would have saved him ninety per cent of his labor." - Nikola Tesla (1931) Ad Lucem Modeling ...

  17. ARM: Broadband Radiometer Station (BRS) broadband shortwave and longwave 1-min radiation data with Dutton correction

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Laura Riihimaki

    1993-09-01

    Broadband Radiometer Station (BRS) broadband shortwave and longwave 1-min radiation data with Dutton correction

  18. ARM: Broadband Radiometer Station (BRS) broadband shortwave and longwave 1-min radiation data with Dutton correction

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Laura Riihimaki

    Broadband Radiometer Station (BRS) broadband shortwave and longwave 1-min radiation data with Dutton correction

  19. Fermilab Today - Classified Ad Policy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Fermilab Classified Ad Policy Fermilab Today now requires that people placing classified ads must belong to one of these categories: a. active and retired employees of Fermi...

  20. Kaolin AD | Open Energy Information

    Open Energy Info (EERE)

    Kaolin AD Jump to: navigation, search Name: Kaolin AD Place: Senovo, Bulgaria Zip: 7038 Sector: Solar Product: Kaolin is Europe's fourth largest producer of silica sands and owns a...

  1. Spin chains and Arnold's problem on the Gauss-Kuz'min statistics for quadratic irrationals

    SciTech Connect (OSTI)

    Ustinov, Alexey V

    2013-05-31

    New results related to number theoretic model of spin chains are proved. We solve Arnold's problem on the Gauss-Kuz'min statistics for quadratic irrationals. Bibliography: 24 titles.

  2. Ad Hoc Meetings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Ad Hoc Meetings Ad Hoc Meetings Ad Hoc Meetings 43.pdf (44.36 KB) More Documents & Publications Radio and Spectrum Management ICAM Workshop PKI Workshop

  3. Fermilab Today | Classifieds Ad Form

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    will be posted on the Internet and can lead to responses from outside the lab. Some ads posted in Fermilab Today in the past have received responses from scammers who, for...

  4. AtMIN7 mediated disease resistance to Pseudomonas syringae in Arabidopsis

    DOE Patents [OSTI]

    He, Sheng Yang; Nomura, Kinya

    2011-07-26

    The present invention relates to compositions and methods for enhancing plant defenses against pathogens. More particularly, the invention relates to enhancing plant immunity against bacterial pathogens, wherein AtMIN7 mediated protection is enhanced and/or there is a decrease in activity of an AtMIN7 associated virulence protein such as a Pseudomonas syringae pv. tomato DC3000 HopM1. Reagents of the present invention provide a means of studying cellular trafficking while formulations of the present inventions provide increased pathogen resistance in plants.

  5. Gravitational charges of transverse asymptotically AdS spacetimes

    SciTech Connect (OSTI)

    Cebeci, Hakan; Sarioglu, Oezguer; Tekin, Bayram

    2006-12-15

    Using Killing-Yano symmetries, we construct conserved charges of spacetimes that asymptotically approach to the flat or anti-de Sitter spaces only in certain directions. In D dimensions, this allows one to define gravitational charges (such as mass and angular momenta densities) of p-dimensional branes/solitons or any other extended objects that curve the transverse space into an asymptotically flat or AdS one. Our construction answers the question of what kind of charges the antisymmetric Killing-Yano tensors lead to.

  6. Systematics of Coupling Flows in AdS Backgrounds

    SciTech Connect (OSTI)

    Goldberger, Walter D.; Rothstein, Ira Z.

    2003-03-18

    We give an effective field theory derivation, based on the running of Planck brane gauge correlators, of the large logarithms that arise in the predictions for low energy gauge couplings in compactified AdS}_5 backgrounds, including the one-loop effects of bulk scalars, fermions, and gauge bosons. In contrast to the case of charged scalars coupled to Abelian gauge fields that has been considered previously in the literature, the one-loop corrections are not dominated by a single 4D Kaluza-Klein mode. Nevertheless, in the case of gauge field loops, the amplitudes can be reorganized into a leading logarithmic contribution that is identical to the running in 4D non-Abelian gauge theory, and a term which is not logarithmically enhanced and is analogous to a two-loop effect in 4D. In a warped GUT model broken by the Higgs mechanism in the bulk,we show that the matching scale that appears in the large logarithms induced by the non-Abelian gauge fields is m_{XY}^2/k where m_{XY} is the bulk mass of the XY bosons and k is the AdS curvature. This is in contrast to the UV scale in the logarithmic contributions of scalars, which is simply the bulk mass m. Our results are summarized in a set of simple rules that can be applied to compute the leading logarithmic predictions for coupling constant relations within a given warped GUT model. We present results for both bulk Higgs and boundary breaking of the GUT gauge

  7. The Ad Lucem Research Network

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    The Ad Lucem Research Network Lada Adamic Associate Professor, School of Information & Center for the Study of Complex Systems University of Michigan Research interests: structure and dynamics of social and information networks, with a particular emphasis on information diffusion, expertise sharing, and online communities D. Lazer et al. "Computational Social Science." Science 323, 5915 (2009). J. Leskovec, L. A. Adamic, and B. A. Huberman. "The dynamics of viral

  8. Microsoft PowerPoint - 16_Sahara.dust.min.20070326.ppt [Compatibility Mode]

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Saharan dust layer suppress deep Saharan dust layer suppress deep convection and precipitation Qilong Min1, Rui Li1, Shuyu Wang1, Bing Lin2, Yong Hu2, Everette Joseph3, Vernon Morris3 Atmospheric Science Research Center, State University of New York S i Di t i NASA L l R h C t Science Directories, NASA Langley Research Center NOAA Center for Atmospheric Sciences, Howard University Saharan dust and dry air effects: y On Hurricans and cloud systems: *The entrainment of dry air into tropical

  9. Doppler Lidar Wind Value-Added Product

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    8 Doppler Lidar Wind Value-Added Product RK Newsom C Sivaraman TR Shippert LD Riihimaki ... DOESC-ARMTR-148 Doppler Lidar Wind Value-Added Product Version 1.0 RK Newsom C Sivaraman ...

  10. Ad Lucem: Modeling Market Transformation Pathways Workshop

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AD LUCEM ... TOWARD THE LIGHT! 1 Ad Lucem: Modeling Market Transformation Pathways Workshop Berkeley, California | Friday, February 17, 2012 Ad lucem - Latin for toward the light - captures the essence of the SunShot Initiative. We seek to accelerate the global transition to clean, abundant solar energy by expanding our understanding of the technology-society-economics nexus. The ability to control energy resources is the enabler for growth, development, and opportunity. The diffusion of

  11. Ad-Venta | Open Energy Information

    Open Energy Info (EERE)

    190 alle de Bourgogne Place: Bourg de Page Country: France Zip: 26300 Sector: Hydrogen Product: Hydrogen storage (on board) Year Founded: 2006 Website: www.ad-venta.com...

  12. Transportation Plan Ad Hoc Working Group | Department of Energy

    Office of Environmental Management (EM)

    Plan Ad Hoc Working Group Transportation Plan Ad Hoc Working Group PDF icon Transportation Plan Ad Hoc Working Group More Documents & Publications Nuclear Fuel Storage and...

  13. Stability of Hořava-Lifshitz black holes in the context of AdS...

    Office of Scientific and Technical Information (OSTI)

    Stability of Hoava-Lifshitz black holes in the context of AdSCFT Citation Details In-Document Search Title: Stability of Hoava-Lifshitz black holes in the context of AdSCFT ...

  14. ARM - Value-Added Product Status Reports

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Status Reports Publications Journal Articles Conference Documents Program Documents & Technical Reports Publications Database Public Information Materials Image Library Videos Publication Resources Submit a Publication Publishing Procedures ARM Style Guide (PDF, 448KB) Acronyms Glossary Logos Contacts RSS for Publications Value-Added Product Status Reports ARM Climate Research Facility Quarterly Value-Added Product Report July 1-September 30, 2015 (PDF, 1MB) ARM Climate Research Facility

  15. Reveal for Adding OpenMP

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Reveal for Adding OpenMP Reveal for Adding OpenMP Reveal is an integrated performance analysis and code optimization tool. Reveal provides: Source code navigation using the analysis data of the entire program Performance data collected during program execution Dependency information for targeted loops Helps users in optimizing code by providing variable scoping feedback and suggested compiler directives For information on how to use Cray Reveal and how to use it on NERSC systems, refer to the

  16. Min Zhang | Bioenergy | NREL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Scientist V, TaskProject Leader, National Renewable Energy Laboratory (NREL), National Bioenergy Center, 2010-present Senior Scientist I and II, Leader, Strain Development Team, ...

  17. QCD Condensates and Holographic Wilson Loops for Asymptotically AdS Spaces

    SciTech Connect (OSTI)

    Quevedo, R. Carcasses; Goity, Jose L.; Trinchero, Roberto C.

    2014-02-01

    The minimization of the Nambu-Goto (NG) action for a surface whose contour defines a circular Wilson loop of radius a placed at a finite value of the coordinate orthogonal to the border is considered. This is done for asymptotically AdS spaces. The condensates of dimension n = 2, 4, 6, 8, and 10 are calculated in terms of the coefficients in the expansion in powers of the radius a of the on-shell subtracted NG action for small a->0. The subtraction employed is such that it presents no conflict with conformal invariance in the AdS case and need not introduce an additional infrared scale for the case of confining geometries. It is shown that the UV value of the gluon condensates is universal in the sense that it only depends on the first coefficients of the difference with the AdS case.

  18. Ad Lucem: Modeling of Market Transformation Pathways Workshop...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Ad Lucem: Modeling of Market Transformation Pathways Workshop Agenda This document details the agenda for the DOE Ad Lucem: Modeling of Market Transformation Pathways Workshop on ...

  19. Building America Expert Meeting: Key Innovations for Adding Energy...

    Energy Savers [EERE]

    Key Innovations for Adding Energy Efficiency to Maintenance Projects Building America Expert Meeting: Key Innovations for Adding Energy Efficiency to Maintenance Projects This ...

  20. ARM Climate Research Facility Quarterly Value-Added Product Report...

    Office of Scientific and Technical Information (OSTI)

    Program Document: ARM Climate Research Facility Quarterly Value-Added Product Report Citation Details In-Document Search Title: ARM Climate Research Facility Quarterly Value-Added ...

  1. ARM Climate Research Facility Quarterly Value-Added Product Report...

    Office of Scientific and Technical Information (OSTI)

    ARM Climate Research Facility Quarterly Value-Added Product Report Citation Details In-Document Search Title: ARM Climate Research Facility Quarterly Value-Added Product Report ...

  2. ARM Climate Research Facility Quarterly Value-Added Product Report...

    Office of Scientific and Technical Information (OSTI)

    Technical Report: ARM Climate Research Facility Quarterly Value-Added Product Report Citation Details In-Document Search Title: ARM Climate Research Facility Quarterly Value-Added ...

  3. Shuchi Energy Ad Promotions P Ltd | Open Energy Information

    Open Energy Info (EERE)

    Shuchi Energy Ad Promotions P Ltd Jump to: navigation, search Name: Shuchi Energy Ad Promotions (P) Ltd Place: Hyderabad, Andhra Pradesh, India Zip: 500062 Sector: Solar Product:...

  4. The Ad Lucem Research Network | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ...lucem2012attendees.pdf More Documents & Publications Big Data Projects on Solar Tech Evolution and Diffusion Ad Lucem Workshop Welcome Ad Lucem Workshop: Modeling Breakout Session

  5. Addendum Added to Innovative Demonstration of Geothermal Energy...

    Energy Savers [EERE]

    Addendum Added to Innovative Demonstration of Geothermal Energy Production FOA Addendum Added to Innovative Demonstration of Geothermal Energy Production FOA July 2, 2010 - 2:13pm ...

  6. Supporting Dynamic Ad hoc Collaboration Capabilities

    SciTech Connect (OSTI)

    Agarwal, Deborah A.; Berket, Karlo

    2003-07-14

    Modern HENP experiments such as CMS and Atlas involve as many as 2000 collaborators around the world. Collaborations this large will be unable to meet often enough to support working closely together. Many of the tools currently available for collaboration focus on heavy-weight applications such as videoconferencing tools. While these are important, there is a more basic need for tools that support connecting physicists to work together on an ad hoc or continuous basis. Tools that support the day-to-day connectivity and underlying needs of a group of collaborators are important for providing light-weight, non-intrusive, and flexible ways to work collaboratively. Some example tools include messaging, file-sharing, and shared plot viewers. An important component of the environment is a scalable underlying communication framework. In this paper we will describe our current progress on building a dynamic and ad hoc collaboration environment and our vision for its evolution into a HENP collaboration environment.

  7. ARM - Value-Added Product (VAP) Reports

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    (VAP) Reports Publications Journal Articles Conference Documents Program Documents & Technical Reports Publications Database Public Information Materials Image Library Videos Publication Resources Submit a Publication Publishing Procedures ARM Style Guide (PDF, 448KB) Acronyms Glossary Logos Contacts RSS for Publications Value-Added Product (VAP) Reports For proper viewing, technical reports should be viewed with Adobe Acrobat Reader. Download the latest version from the Adobe Reader

  8. ARM - Value-Added Products - Status

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    - Status Report Expand Orange | Expand Blue | Expand Green | Collapse All See Legend for Data Availability explanation. ARM - Value-Added Products - Status Last Update: March 21 2016 19:00:50 +/- Vap Name Translator Developer Frequency Tier Producer Data Availability ACRED (ARM Cloud Retrieval Ensemble Data) Shaocheng Xie Chuanfeng Zhao, Renata Mc Coy Periodically Evaluation Developer ARM Overview: Developer Description: The ARM Cloud Retrieval Ensemble Dataset (ACRED) is a multi-year cloud

  9. Merged Sounding Value-Added Product

    SciTech Connect (OSTI)

    Troyan, D

    2010-03-03

    The Merged Sounding value-added product (VAP) uses a combination of observations from radiosonde soundings, the microwave radiometer (MWR), surface meteorological instruments, and European Centre for Medium-Range Weather Forecasts (ECMWF) model output with a sophisticated scaling/interpolation/smoothing scheme in order to define profiles of the atmospheric thermodynamic state at one-minute temporal intervals and a total of 266 altitude levels.

  10. ARM KAZR-ARSCL Value Added Product

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Jensen, Michael

    The Ka-band ARM Zenith Radars (KAZRs) have replaced the long-serving Millimeter Cloud Radars, or MMCRs. Accordingly, the primary MMCR Value Added Product (VAP), the Active Remote Sensing of CLouds (ARSCL) product, is being replaced by a KAZR-based version, the KAZR-ARSCL VAP. KAZR-ARSCL provides cloud boundaries and best-estimate time-height fields of radar moments.

  11. ARM KAZR-ARSCL Value Added Product

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Jensen, Michael

    2012-09-28

    The Ka-band ARM Zenith Radars (KAZRs) have replaced the long-serving Millimeter Cloud Radars, or MMCRs. Accordingly, the primary MMCR Value Added Product (VAP), the Active Remote Sensing of CLouds (ARSCL) product, is being replaced by a KAZR-based version, the KAZR-ARSCL VAP. KAZR-ARSCL provides cloud boundaries and best-estimate time-height fields of radar moments.

  12. Entropy of near-extremal black holes in AdS5

    SciTech Connect (OSTI)

    Simon, Joan; Balasubramanian, Vijay; de Boer, Jan; Jejjala, Vishnu; Simon, Joan

    2007-07-24

    We construct the microstates of near-extremal black holes in AdS_5 x S5 as gases of defects distributed in heavy BPS operators in the dual SU(N) Yang-Mills theory. These defects describe open strings on spherical D3-branes in the S5, and we show that they dominate the entropy by directly enumerating them and comparing the results with a partition sum calculation. We display new decoupling limits in which the field theory of the lightest open strings on the D-branes becomes dual to a near-horizon region of the black hole geometry. In the single-charge black hole we find evidence for an infrared duality between SU(N) Yang-Mills theories that exchanges the rank of the gauge group with an R-charge. In the two-charge case (where pairs of branes intersect on a line), the decoupled geometry includes an AdS_3 factor with a two-dimensional CFT dual. The degeneracy in this CFT accounts for the black hole entropy. In the three-charge case (where triples of branes intersect at a point), the decoupled geometry contains an AdS_2 factor. Below a certain critical mass, the two-charge system displays solutions with naked timelike singularities even though they do not violate a BPS bound. We suggest a string theoretic resolution of these singularities.

  13. Interpolated Sounding Value-Added Product

    SciTech Connect (OSTI)

    Troyan, D

    2013-04-01

    The Interpolated Sounding (INTERPSONDE) value-added product (VAP) uses a combination of observations from radiosonde soundings, the microwave radiometer (MWR), and surface meteorological instruments in order to define profiles of the atmospheric thermodynamic state at one-minute temporal intervals and a total of at least 266 altitude levels. This VAP is part of the Merged Sounding (MERGESONDE) suite of VAPs. INTERPSONDE is the profile of the atmospheric thermodynamic state created using the algorithms of MERGESONDE without including the model data from the European Centre for Medium-range Weather Forecasting (ECMWF). More specifically, INTERPSONDE VAP represents an intermediate step within the larger MERGESONDE process.

  14. Ad Lucem: Modeling of Market Transformation Pathways Workshop Agenda |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy of Market Transformation Pathways Workshop Agenda Ad Lucem: Modeling of Market Transformation Pathways Workshop Agenda This document details the agenda for the DOE Ad Lucem: Modeling of Market Transformation Pathways Workshop on Feb. 17, 2012. adlucem2012_agenda.pdf (295.01 KB) More Documents & Publications Ad Lucem Workshop Welcome Ad Lucem: Modeling Market Transformation Pathways Workshop The Ad Lucem Research Network

  15. Adding Insulation to an Existing Home | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Weatherize » Insulation » Adding Insulation to an Existing Home Adding Insulation to an Existing Home Adding insulation in an existing home saves money and improves comfort. | Photo courtesy of Dennis Schroeder, NREL. Adding insulation in an existing home saves money and improves comfort. | Photo courtesy of Dennis Schroeder, NREL. Unless your home was specially constructed for energy efficiency, you can probably reduce your energy bills by adding more insulation. Many older homes have less

  16. POSSIBLE CHROMOSPHERIC ACTIVITY CYCLES IN AD LEO

    SciTech Connect (OSTI)

    Buccino, Andrea P.; Petrucci, Romina; Mauas, Pablo J. D.; Jofr, Emiliano

    2014-01-20

    AD Leo (GJ388) is an active dM3 flare star that has been extensively observed both in the quiescent and flaring states. Since this active star is near the fully convective boundary, studying its long-term chromospheric activity in detail could be an appreciable contribution to dynamo theory. Here, using the Lomb-Scargle periodogram, we analyze the Ca IIK line-core fluxes derived from CASLEO spectra obtained between 2001 and 2013 and the V magnitude from the ASAS database between 2004 and 2010. From both of these totally independent time series, we obtain a possible activity cycle with a period of approximately seven years and a less significant shorter cycle of approximately two years. A tentative interpretation is that a dynamo operating near the surface could be generating the longer cycle, while a second dynamo operating in the deep convection zone could be responsible for the shorter one. Based on the long duration of our observing program at CASLEO and the fact that we observe different spectral features simultaneously, we also analyze the relation between simultaneous measurements of the Na I index (R{sub D}{sup ?}), H?, and Ca IIK fluxes at different activity levels of AD Leo, including flares.

  17. Quantum compositeness of gravity: black holes, AdS and inflation

    SciTech Connect (OSTI)

    Dvali, Gia; Gomez, Cesar E-mail: cesar.gomez@uam.es

    2014-01-01

    Gravitational backgrounds, such as black holes, AdS, de Sitter and inflationary universes, should be viewed as composite of N soft constituent gravitons. It then follows that such systems are close to quantum criticality of graviton Bose-gas to Bose-liquid transition. Generic properties of the ordinary metric description, including geodesic motion or particle-creation in the background metric, emerge as the large-N limit of quantum scattering of constituent longitudinal gravitons. We show that this picture correctly accounts for physics of large and small black holes in AdS, as well as reproduces well-known inflationary predictions for cosmological parameters. However, it anticipates new effects not captured by the standard semi-classical treatment. In particular, we predict observable corrections that are sensitive to the inflationary history way beyond last 60 e-foldings. We derive an absolute upper bound on the number of e-foldings, beyond which neither de Sitter nor inflationary Universe can be approximated by a semi-classical metric. However, they could in principle persist in a new type of quantum eternity state. We discuss implications of this phenomenon for the cosmological constant problem.

  18. Quantum compositeness of gravity: black holes, AdS and inflation

    SciTech Connect (OSTI)

    Dvali, Gia; Gomez, Cesar

    2014-01-14

    Gravitational backgrounds, such as black holes, AdS, de Sitter and inflationary universes, should be viewed as composite of N soft constituent gravitons. It then follows that such systems are close to quantum criticality of graviton Bose-gas to Bose-liquid transition. Generic properties of the ordinary metric description, including geodesic motion or particle-creation in the background metric, emerge as the large-N limit of quantum scattering of constituent longitudinal gravitons. We show that this picture correctly accounts for physics of large and small black holes in AdS, as well as reproduces well-known inflationary predictions for cosmological parameters. However, it anticipates new effects not captured by the standard semi-classical treatment. In particular, we predict observable corrections that are sensitive to the inflationary history way beyond last 60 e-foldings. We derive an absolute upper bound on the number of e-foldings, beyond which neither de Sitter nor inflationary Universe can be approximated by a semi-classical metric. However, they could in principle persist in a new type of quantum eternity state. We discuss implications of this phenomenon for the cosmological constant problem.

  19. AD Hydro Power Ltd ADHPL | Open Energy Information

    Open Energy Info (EERE)

    AD Hydro Power Ltd ADHPL Jump to: navigation, search Name: AD Hydro Power Ltd. (ADHPL) Place: Noida, Uttar Pradesh, India Zip: 201301 Sector: Hydro Product: Noida-based small hydro...

  20. Ad Lucem Workshop: Modeling Breakout Session | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Workshop: Modeling Breakout Session Ad Lucem Workshop: Modeling Breakout Session This presentation summarizes the information discussed during the modeling breakout session of the DOE Ad Lucem Workshop on Feb. 17, 2012. adlucem2012_modeling_breakout.pdf (1.66 MB) More Documents & Publications Ad Lucem: Modeling of Market Transformation Pathways Workshop Agenda Ad Lucem: Modeling Market Transformation Pathways Workshop Break-out Discussion i: Modeling Consumer Behavior Residential S

  1. Ad Lucem: Modeling Market Transformation Pathways Workshop | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Market Transformation Pathways Workshop Ad Lucem: Modeling Market Transformation Pathways Workshop This white paper summarizes the information discussed during the Ad Lucem: Modeling Market Transformation Pathways Workshop, Feb. 17, 2012, in Berkeley, California. adlucem2012_whitepaper.pdf (547.71 KB) More Documents & Publications Ad Lucem: Modeling of Market Transformation Pathways Workshop Agenda Ad Lucem Workshop Welcome Materials from 2014 SunShot Summit BREAKOUT SESSION: THE

  2. ARM Climate Research Facility Spectral Surface Albedo Value-Added Product (VAP) Report

    SciTech Connect (OSTI)

    McFarlane, S; Gaustad, K; Long, C; Mlawer, E

    2011-07-15

    This document describes the input requirements, output data products, and methodology for the Spectral Surface Albedo (SURFSPECALB) value-added product (VAP). The SURFSPECALB VAP produces a best-estimate near-continuous high spectral resolution albedo data product using measurements from multifilter radiometers (MFRs). The VAP first identifies best estimates for the MFR downwelling and upwelling shortwave irradiance values, and then calculates narrowband spectral albedo from these best-estimate irradiance values. The methodology for finding the best-estimate values is based on a simple process of screening suspect data and backfilling screened and missing data with estimated values when possible. The resulting best-estimate MFR narrowband spectral albedos are used to determine a daily surface type (snow, 100% vegetation, partial vegetation, or 0% vegetation). For non-snow surfaces, a piecewise continuous function is used to estimate a high spectral resolution albedo at 1 min temporal and 10 cm-1 spectral resolution.

  3. Fast-ion transport in q{sub min}>2, high-β steady-state scenarios on DIII-D

    SciTech Connect (OSTI)

    Holcomb, C. T.; Heidbrink, W. W.; Collins, C.; Ferron, J. R.; Van Zeeland, M. A.; Garofalo, A. M.; Bass, E. M.; Luce, T. C.; Pace, D. C.; Solomon, W. M.; Mueller, D.; Grierson, B.; Podesta, M.; Gong, X.; Ren, Q.; Park, J. M.; Kim, K.; Turco, F.

    2015-05-15

    Results from experiments on DIII-D [J. L. Luxon, Fusion Sci. Technol. 48, 828 (2005)] aimed at developing high β steady-state operating scenarios with high-q{sub min} confirm that fast-ion transport is a critical issue for advanced tokamak development using neutral beam injection current drive. In DIII-D, greater than 11 MW of neutral beam heating power is applied with the intent of maximizing β{sub N} and the noninductive current drive. However, in scenarios with q{sub min}>2 that target the typical range of q{sub 95}= 5–7 used in next-step steady-state reactor models, Alfvén eigenmodes cause greater fast-ion transport than classical models predict. This enhanced transport reduces the absorbed neutral beam heating power and current drive and limits the achievable β{sub N}. In contrast, similar plasmas except with q{sub min} just above 1 have approximately classical fast-ion transport. Experiments that take q{sub min}>3 plasmas to higher β{sub P} with q{sub 95}= 11–12 for testing long pulse operation exhibit regimes of better than expected thermal confinement. Compared to the standard high-q{sub min} scenario, the high β{sub P} cases have shorter slowing-down time and lower ∇β{sub fast}, and this reduces the drive for Alfvénic modes, yielding nearly classical fast-ion transport, high values of normalized confinement, β{sub N}, and noninductive current fraction. These results suggest DIII-D might obtain better performance in lower-q{sub 95}, high-q{sub min} plasmas using broader neutral beam heating profiles and increased direct electron heating power to lower the drive for Alfvén eigenmodes.

  4. Lack of anti-tumor activity with the ?-catenin expression inhibitor EZN-3892 in the C57BL/6J Min/+ model of intestinal carcinogenesis

    SciTech Connect (OSTI)

    Hasson, Rian M.; Briggs, Alexandra; Rizvi, Hira; Carothers, Adelaide M.; Davids, Jennifer S.; Bertagnolli, Monica M.; Cho, Nancy L.

    2014-02-14

    Highlights: Wnt/?-catenin signaling is aberrantly activated in most colorectal cancers. Locked nucleic acid (LNA)-based antisense is a novel tool for cancer therapy. ?-Catenin inhibition was observed in mature intestinal tissue of LNA-treated mice. Further investigation of Wnt/?-catenin targeted therapies is warranted. - Abstract: Background: Previously, we showed that short-term inhibition of ?-catenin expression and reversal of aberrant ?-catenin subcellular localization by the selective COX-2 inhibitor celecoxib is associated with adenoma regression in the C57BL/6J Min/+ mouse. Conversly, long-term administration resulted in tumor resistance, leading us to investigate alternative methods for selective ?-catenin chemoprevention. In this study, we hypothesized that disruption of ?-catenin expression by EZN-3892, a selective locked nucleic acid (LNA)-based ?-catenin inhibitor, would counteract the tumorigenic effect of Apc loss in Min/+ adenomas while preserving normal intestinal function. Materials and methods: C57BL/6J Apc{sup +/+} wild-type (WT) and Min/+ mice were treated with the maximum tolerated dose (MTD) of EZN-3892 (30 mg/kg). Drug effect on tumor numbers, ?-catenin protein expression, and nuclear ?-catenin localization were determined. Results: Although the tumor phenotype and ?-catenin nuclear localization in Min/+ mice did not change following drug administration, we observed a decrease in ?-catenin expression levels in the mature intestinal tissue of treated Min/+ and WT mice, providing proof of principle regarding successful delivery of the LNA-based antisense vehicle. Higher doses of EZN-3892 resulted in fatal outcomes in Min/+ mice, likely due to ?-catenin ablation in the intestinal tissue and loss of function. Conclusions: Our data support the critical role of Wnt/?-catenin signaling in maintaining intestinal homeostasis and highlight the challenges of effective drug delivery to target disease without permanent toxicity to normal cellular

  5. Ads-tec GmbH | Open Energy Information

    Open Energy Info (EERE)

    Raiffeisenstrasse 14 Place: Leinfelden Echterdingen Zip: 70771 Sector: Services Product: Energy Storage Systems Number of Employees: 51-200 Website: www.ads-tec.de Coordinates:...

  6. Recently Added or Revised "Slice" Information (contracts/slice...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Product Recently Added or Revised Information (updated November 2, 2011) Applicable Interest Rates for Slice Product (updated November 2, 2011) Slice Product Review Meeting...

  7. ARM Climate Research Facility Quarterly Value-Added Product Report...

    Office of Scientific and Technical Information (OSTI)

    Climate Research Facility Quarterly Value-Added Product Report Fourth Quarter: July 1-September 30, 2012 Citation Details In-Document Search Title: ARM Climate Research Facility ...

  8. Adding Insulation to an Existing Home | Department of Energy

    Office of Environmental Management (EM)

    existing home saves money and improves comfort. | Photo courtesy of Dennis Schroeder, NREL. Adding insulation in an existing home saves money and improves comfort. | Photo...

  9. Bioenergy Demonstration Project: Value-Added Products from Renewable...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Bioenergy Demonstration Project: Value-Added Products from Renewable Fuels May 23, 2013 Technology Area Review: Biochemical Conversion Paul Blum University of Nebraska 2 Goal ...

  10. ARM Climate Research Facility Quarterly Value-Added Product Report

    SciTech Connect (OSTI)

    Sivaraman, Chitra

    2014-11-21

    The purpose of this report is to provide a concise status update for value-added products (VAP) implemented by the Atmospheric Radiation Measurement (ARM) Climate Research Facility.

  11. DOE Announces Webinars on Adding Solar to Your Building Portfolio...

    Office of Environmental Management (EM)

    DOE Announces Webinars on Adding Solar to Your Building ... from adopting the latest energy efficiency and renewable ... January 28: How to Utilize the National Geothermal Data ...

  12. Added Public Promotional Page! | OpenEI Community

    Open Energy Info (EERE)

    Added Public Promotional Page Home > Groups > Linked Open Data Workshop in Washington, D.C. Jweers's picture Submitted by Jweers(88) Contributor 27 September, 2012 - 18:10 Event...

  13. Adding Nanocavities to Catalyst Surfaces Enhances Chemical Selectivity...

    Office of Science (SC) Website

    made by adding a template during the atomic layer deposition process that is used to ... Publications C. P. Canlas, J. Lu, N. A. Ray, N. A. Grosso-Giordano, J. W. Elam, S. Lee, R. ...

  14. Doppler Lidar Vertical Velocity Statistics Value-Added Product

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    49 Doppler Lidar Vertical Velocity Statistics Value-Added Product RK Newsom C Sivaraman TR Shippert LD Riihimaki July 2015 DISCLAIMER This report was prepared as an account of work...

  15. Value-added agriculture offers small agribusinesses additional income

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    potential Value-added agriculture Community Connections: Your link to news and opportunities from Los Alamos National Laboratory Latest Issue: September 1, 2016 all issues All Issues » submit Value-added agriculture offers small agribusinesses additional income potential Closing the gap between raw product and end user September 1, 2015 Las Nueve Niñas Winery wine label. Las Nueve Niñas Winery wine label. Contact Community Programs Director Kathy Keith Email Editor Ute Haker Email Instead

  16. Anaerobic Digestion (AD): not only methane | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Anaerobic Digestion (AD): not only methane Anaerobic Digestion (AD): not only methane Breakout Session 1: New Developments and Hot Topics Session 1-C: Beyond Biofuels Larry Baresi, Professor of Biology, California State University, Northridge b13_baresi_1-C.pdf (980.78 KB) More Documents & Publications Electrobiocommodities from Carbon Dioxide: Enhancing Microbial Electrosynthesis with Synthetic Electromicrobiology and System Design Hydrogen, Hydrocarbons, and Bioproduct Precursors from

  17. Comments on Cosmic Censorship in AdS/CFT

    SciTech Connect (OSTI)

    Hubeny, Veronika E.; Liu, Xiao; Rangamani, Mukund; Shenker, Stephen

    2004-03-21

    Recently Hertog, Horowitz, and Maeda (HHM) (hep-th/0310054) have proposed that cosmic censorship can be violated in the AdS/CFT context. They argue that for certain initial data there is insufficient energy available to make a black hole whose horizon is big enough to cloak the singularity that forms. We have investigated this proposal in the models HHM discuss and have thus far been unable to find initial data that provably satisfy this criterion, despite our development of an improved lower bound on the size of the singular region. This is consistent with recent numerical results (hep-th/0402109). For certain initial data, the energies of our configurations are not far above the lower bound on the requisite black hole mass, and so it is possible that in the exact time development naked singularities do form. We go on to argue that the finite radius cut-off AdS_5 situation discussed by HHM displays instabilities when the full 10D theory is considered. We propose an AdS_3 example that may well be free of this instability.

  18. Comments on Cosmic Censorship in AdS/CFT

    SciTech Connect (OSTI)

    Hubeny, V.

    2004-04-06

    Recently Hertog, Horowitz, and Maeda (HHM) (hep-th/0310054) have proposed that cosmic censorship can be violated in the AdS/CFT context. They argue that for certain initial data there is insufficient energy available to make a black hole whose horizon is big enough to cloak the singularity that forms. We have investigated this proposal in the models HHM discuss and have thus far been unable to find initial data that provably satisfy this criterion, despite our development of an improved lower bound on the size of the singular region. This is consistent with recent numerical results (hep-th/0402109). For certain initial data, the energies of our configurations are not far above the lower bound on the requisite black hole mass, and so it is possible that in the exact time development naked singularities do form. We go on to argue that the finite radius cut-off AdS5 situation discussed by HHM displays instabilities when the full 10D theory is considered. We propose an AdS3 example that may well be free of this instability.

  19. No-carrier-added [1.sup.11 c]putrescine

    DOE Patents [OSTI]

    McPherson, Daniel W.; Fowler, Joanna S.; Wolf, Alfred P.

    1989-01-01

    The invention relates to a new radiolabeled imaging agent, no-carrier-added [1-.sup.11 C]putrescine, and to the use of this very pure material as a radiotracer with positron emission tomography for imaging brain tumors. The invention further relates to the synthesis of no-carrier-added [1-.sup.11 C]putrescine based on the Michael addition of potassium .sup.11 C-labeled cyanide to acrylonitrile followed by reduction of the .sup.11 C-labeled dinitrile. The new method is rapid and efficient and provides radiotracer with a specific activity greater than 1.4 curies per millimol and in a purity greater than 95%.

  20. Raman Lidar Profiles–Temperature (RLPROFTEMP) Value-Added Product

    SciTech Connect (OSTI)

    Newsom, RK; Sivaraman, C; McFarlane, SA

    2012-10-31

    The purpose of this document is to describe the Raman Lidar Profiles–Temperature (RLPROFTEMP) value-added product (VAP) and the procedures used to derive atmospheric temperature profiles from the raw RL measurements. Sections 2 and 4 describe the input and output variables, respectively. Section 3 discusses the theory behind the measurement and the details of the algorithm, including calibration and overlap correction.

  1. Top Value-Added Chemicals from Biomass - Volume II„Results of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Value-Added Chemicals from Biomass - Volume IIResults of Screening for Potential Candidates from Biorefinery Lignin Top Value-Added Chemicals from Biomass - Volume IIResults of ...

  2. Doppler Lidar Wind Value-Added Product (Technical Report) | SciTech...

    Office of Scientific and Technical Information (OSTI)

    Wind Value-Added Product Citation Details In-Document Search Title: Doppler Lidar Wind Value-Added Product Wind speed and direction, together with pressure, temperature, and ...

  3. Neutron Instruments Added at Oak Ridge (Journal Article) | SciTech...

    Office of Scientific and Technical Information (OSTI)

    Neutron Instruments Added at Oak Ridge Citation Details In-Document Search Title: Neutron Instruments Added at Oak Ridge The neutron scattering facilities at Oak Ridge National ...

  4. Evaluation of the Ad Council/DOE "What's Your Excuse" Public...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Ad CouncilDOE "What's Your Excuse" Public Service Advertising Campaign Evaluation of the Ad CouncilDOE "What's Your Excuse" Public Service Advertising Campaign Evaluation of the ...

  5. Organic Aerosol Component (OACOMP) Value-Added Product Report

    SciTech Connect (OSTI)

    Fast, J; Zhang, Q; Tilp, A; Shippert, T; Parworth, C; Mei, F

    2013-08-23

    Significantly improved returns in their aerosol chemistry data can be achieved via the development of a value-added product (VAP) of deriving OA components, called Organic Aerosol Components (OACOMP). OACOMP is primarily based on multivariate analysis of the measured organic mass spectral matrix. The key outputs of OACOMP are the concentration time series and the mass spectra of OA factors that are associated with distinct sources, formation and evolution processes, and physicochemical properties.

  6. Linear Fresnel Technology added to System Advisor Model's Capabilities -

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    News Releases | NREL Linear Fresnel Technology added to System Advisor Model's Capabilities Now utilities can get detailed information on siting, performance and finances February 8, 2012 A promising Concentrating Solar Power (CSP) technology that uses a stationary receiver tube and an array of mirrors mounted near the ground can now be accessed within the System Advisor Model (SAM), which predicts annual energy production, hourly performance and return on investment. The U.S. Department of

  7. New Atmospheric Profiling Instrument Added to SGP CART Suite

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    3 New Atmospheric Profiling Instrument Added to SGP CART Suite A new atmospheric profiling instrument at the SGP CART site is giving researchers an additional useful data stream. The new instrument is a microwave radiometer profiler (MWRP) developed by Radiometrics Corporation. One ARM Program focus is improving the quality of simulations by global climate models, particularly models that deal with interactions between sunlight (solar radiation) and clouds. To support this improvement, ARM needs

  8. ARM Climate Research Facility Quarterly Value-Added Product Report

    SciTech Connect (OSTI)

    Sivaraman, Chitra

    2013-07-31

    The purpose of this report is to provide a concise status update for value-added products (VAP) implemented by the Atmospheric Radiation Measurement Climate Research Facility. The report is divided into the following sections: (1) new VAPs for which development has begun, (2) progress on existing VAPs, (3) future VAPs that have been recently approved, (4) other work that leads to a VAP, and (5) top requested VAPs from the archive.

  9. 2D Gridded Surface Data Value-Added Product

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2 2D Gridded Surface Data Value-Added Product Q Tang S Xie July 2015 DISCLAIMER This report was prepared as an account of work sponsored by the U.S. Government. Neither the United States nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned

  10. A Natural Language for AdS/CFT Correlators

    SciTech Connect (OSTI)

    Fitzpatrick, A.Liam; Kaplan, Jared; Penedones, Joao; Raju, Suvrat; van Rees, Balt C.; /YITP, Stony Brook

    2012-02-14

    We provide dramatic evidence that 'Mellin space' is the natural home for correlation functions in CFTs with weakly coupled bulk duals. In Mellin space, CFT correlators have poles corresponding to an OPE decomposition into 'left' and 'right' sub-correlators, in direct analogy with the factorization channels of scattering amplitudes. In the regime where these correlators can be computed by tree level Witten diagrams in AdS, we derive an explicit formula for the residues of Mellin amplitudes at the corresponding factorization poles, and we use the conformal Casimir to show that these amplitudes obey algebraic finite difference equations. By analyzing the recursive structure of our factorization formula we obtain simple diagrammatic rules for the construction of Mellin amplitudes corresponding to tree-level Witten diagrams in any bulk scalar theory. We prove the diagrammatic rules using our finite difference equations. Finally, we show that our factorization formula and our diagrammatic rules morph into the flat space S-Matrix of the bulk theory, reproducing the usual Feynman rules, when we take the flat space limit of AdS/CFT. Throughout we emphasize a deep analogy with the properties of flat space scattering amplitudes in momentum space, which suggests that the Mellin amplitude may provide a holographic definition of the flat space S-Matrix.

  11. Vocational Rehabilitation -Value Added: Explaining What We Do,

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Vocational Rehabilitation -Value Added: Explaining What We Do, Craig Bock, MA, CRC Washington State IARP Quarterly Newsletter - June 2009 If you have an injury at work, do you know what happens next or how you would navigate the Workers' Compensation system should you need to? What does RCW 51.32.095 (state law) and WAC 296-19A-070 (administrative rules) mean to you? If you could not return to your job and had permanent physical or cognitive restrictions who would help you explore your return to

  12. Commercial Demonstration of Wood Recovery, Recycling, and Value Adding Technologies

    SciTech Connect (OSTI)

    Auburn Machinery, Inc.

    2004-07-15

    This commercial demonstration project demonstrated the technical feasibility of converting low-value, underutilized and waste stream solid wood fiber material into higher valued products. With a growing need to increase product/production yield and reduce waste in most sawmills, few recovery operations and practically no data existed to support the viability of recovery operations. Prior to our efforts, most all in the forest products industry believed that recovery was difficult, extremely labor intensive, not cost effective, and that recovered products had low value and were difficult to sell. This project provided an opportunity for many within the industry to see through demonstration that converting waste stream material into higher valued products does in fact offer a solution. Our work, supported by the U.S. Department of Energy, throughout the project aimed to demonstrate a reasonable approach to reducing the millions of recoverable solid wood fiber tons that are annually treated as and converted into low value chips, mulch and fuel. Consequently sawmills continue to suffer from reduced availability of forest resources, higher raw material costs, growing waste disposal problems, increased global competition, and more pressure to operate in an Environmentally Friendly manner. It is our belief (based upon the experience of this project) that the successful mainstreaming of the recovery concept would assist in alleviating this burden as well as provide for a realistically achievable economic benefit to those who would seriously pursue the concept and tap into the rapidly growing ''GREEN'' building marketplace. Ultimately, with participation and aggressive pursuit of the recovery concept, the public would benefit in that: (1) Landfill/disposal waste volume could be reduced adding greater life to existing municipal landfill sites thereby minimizing the need to prematurely license and open added facilities. Also, there would be a cost avoidance benefit associated

  13. Some engineering properties of heavy concrete added silica fume

    SciTech Connect (OSTI)

    Akka?, Ay?e; Ba?yi?it, Celalettin; Esen, Serap

    2013-12-16

    Many different types of building materials have been used in building construction for years. Heavy concretes can be used as a building material for critical building as it can contain a mixture of many heavy elements. The barite itself for radiation shielding can be used and also in concrete to produce the workable concrete with a maximum density and adequate structural strength. In this study, some engineering properties like compressive strength, elasticity modules and flexure strength of heavy concretes added Silica fume have been investigated.

  14. Adding kinetics and hydrodynamics to the CHEETAH thermochemical code

    SciTech Connect (OSTI)

    Fried, L.E., Howard, W.M., Souers, P.C.

    1997-01-15

    In FY96 we released CHEETAH 1.40, which made extensive improvements on the stability and user friendliness of the code. CHEETAH now has over 175 users in government, academia, and industry. Efforts have also been focused on adding new advanced features to CHEETAH 2.0, which is scheduled for release in FY97. We have added a new chemical kinetics capability to CHEETAH. In the past, CHEETAH assumed complete thermodynamic equilibrium and independence of time. The addition of a chemical kinetic framework will allow for modeling of time-dependent phenomena, such as partial combustion and detonation in composite explosives with large reaction zones. We have implemented a Wood-Kirkwood detonation framework in CHEETAH, which allows for the treatment of nonideal detonations and explosive failure. A second major effort in the project this year has been linking CHEETAH to hydrodynamic codes to yield an improved HE product equation of state. We have linked CHEETAH to 1- and 2-D hydrodynamic codes, and have compared the code to experimental data. 15 refs., 13 figs., 1 tab.

  15. Matching the Hagedorn temperature in AdS/CFT correspondence

    SciTech Connect (OSTI)

    Harmark, Troels; Orselli, Marta

    2006-12-15

    We match the Hagedorn/deconfinement temperature of planar N=4 super Yang-Mills (SYM) on RxS{sup 3} to the Hagedorn temperature of string theory on AdS{sub 5}xS{sup 5}. The match is done in a near-critical region where both gauge theory and string theory are weakly coupled. The near-critical region is near a point with zero temperature and critical chemical potential. On the gauge-theory side we are taking a decoupling limit found in Ref. 7 in which the physics of planar N=4 SYM is given exactly by the ferromagnetic XXX{sub 1/2} Heisenberg spin chain. We find moreover a general relation between the Hagedorn/deconfinement temperature and the thermodynamics of the Heisenberg spin chain and we use this to compute it in two distinct regimes. On the string-theory side, we identify the dual limit for which the string tension and string coupling go to zero. This limit is taken of string theory on a maximally supersymmetric pp-wave background with a flat direction, obtained from a Penrose limit of AdS{sub 5}xS{sup 5}. We compute the Hagedorn temperature of the string theory and find agreement with the Hagedorn/deconfinement temperature computed on the gauge-theory side.

  16. 2D Gridded Surface Data Value-Added Product

    SciTech Connect (OSTI)

    Tang, Q; Xie, S

    2015-08-30

    This report describes the Atmospheric Radiation Measurement (ARM) Best Estimate (ARMBE) 2-dimensional (2D) gridded surface data (ARMBE2DGRID) value-added product. Spatial variability is critically important to many scientific studies, especially those that involve processes of great spatial variations at high temporal frequency (e.g., precipitation, clouds, radiation, etc.). High-density ARM sites deployed at the Southern Great Plains (SGP) allow us to observe the spatial patterns of variables of scientific interests. The upcoming megasite at SGP with its enhanced spatial density will facilitate the studies at even finer scales. Currently, however, data are reported only at individual site locations at different time resolutions for different datastreams. It is difficult for users to locate all the data they need and requires extra effort to synchronize the data. To address these problems, the ARMBE2DGRID value-added product merges key surface measurements at the ARM SGP sites and interpolates the data to a regular 2D grid to facilitate the data application.

  17. Zero added oxygen for high quality sputtered ITO. A data science investigation of reduced Sn-content and added Zr

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Peshek, Timothy J.; Burst, James M.; Coutts, Timothy J.; Gessert, Timothy A.

    2016-01-19

    Here, we demonstrate mobilities of >45 cm2/V s for sputtered tin-doped indium oxide (ITO) films at zero added oxygen. All films were deposited with 5 wt. % SnO2, instead of the more conventional 8–10 wt. %, and had varying ZrO2 content from 0 to 3 wt. %, with a subsequent reduction in In2O3 content. Moreover, these films were deposited by radio-frequency magnetron sputtering from nominally stoichiometric targets with varying oxygen partial pressure in the sputter ambient. Anomalous behavior was discovered for films with no Zr-added, where a bimodality of high and low mobilities was discovered for nominally similar growth conditions.more » However, all films showed the lowest resistivity and highest mobilities when the oxygen partial pressure in the sputter ambient was zero. This result is contrasted with several other reports of ITO transport performance having a maximum for small but nonzero oxygen partial pressure. Our result is attributed to the reduced concentration of SnO2. The addition of ZrO2 yielded the highest mobilities at >55 cm2/V s and the films showed a modest increase in optical transmission with increasing Zr-content.« less

  18. Perfect fluidity of a dissipative system: Analytical solution for the Boltzmann equation in AdS2 Ⓧ S2

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Noronha, Jorge; Denicol, Gabriel S.

    2015-12-30

    In this paper we obtain an analytical solution of the relativistic Boltzmann equation under the relaxation time approximation that describes the out-of-equilibrium dynamics of a radially expanding massless gas. This solution is found by mapping this expanding system in flat spacetime to a static flow in the curved spacetime AdS2 Ⓧ S2. We further derive explicit analytic expressions for the momentum dependence of the single-particle distribution function as well as for the spatial dependence of its moments. We find that this dissipative system has the ability to flow as a perfect fluid even though its entropy density does not matchmore » the equilibrium form. The nonequilibrium contribution to the entropy density is shown to be due to higher-order scalar moments (which possess no hydrodynamical interpretation) of the Boltzmann equation that can remain out of equilibrium but do not couple to the energy-momentum tensor of the system. Furthermore, in this system the slowly moving hydrodynamic degrees of freedom can exhibit true perfect fluidity while being totally decoupled from the fast moving, nonhydrodynamical microscopic degrees of freedom that lead to entropy production.« less

  19. No-carrier-added (/sup 18/F)-N-methylspiroperidol

    DOE Patents [OSTI]

    Shiue, C.Y.; Fowler, J.S.; Wolf, A.P.

    1985-10-04

    The present invention is directed to the synthesis of a radioligand, labeled with a positron emitting radionuclide which is suitable for dynamic studies in humans using positron emission transaxial tomography. No-carrier-added (NCA) (/sup 18/F)-N-methylspiroperiodl is prepared from four different sustrates: p-nitrobenzonitrile, cyclopropyl p-nitrophenyl ketone, p-cyclopropanoyl-N,N,N-trimethylanilinium iodide and p-cyclopropanoyl-N,N,N-trimethylanilinium perchlorate. The process for the production of NCA (/sup 18/F)-N-methylspiroperidol is a nucleophilic aromatic substitution reaction. Furthermore, the compound of this invention is shown to be effective as a new drug of choice for in vivo examination of dopamine binding sites in a human brain. In particular, this drug is primarily useful in the noninvasive technique of positron emission transaxial tomography (PETT).

  20. Doppler Lidar Vertical Velocity Statistics Value-Added Product

    SciTech Connect (OSTI)

    Newsom, R. K.; Sivaraman, C.; Shippert, T. R.; Riihimaki, L. D.

    2015-07-01

    Accurate height-resolved measurements of higher-order statistical moments of vertical velocity fluctuations are crucial for improved understanding of turbulent mixing and diffusion, convective initiation, and cloud life cycles. The Atmospheric Radiation Measurement (ARM) Climate Research Facility operates coherent Doppler lidar systems at several sites around the globe. These instruments provide measurements of clear-air vertical velocity profiles in the lower troposphere with a nominal temporal resolution of 1 sec and height resolution of 30 m. The purpose of the Doppler lidar vertical velocity statistics (DLWSTATS) value-added product (VAP) is to produce height- and time-resolved estimates of vertical velocity variance, skewness, and kurtosis from these raw measurements. The VAP also produces estimates of cloud properties, including cloud-base height (CBH), cloud frequency, cloud-base vertical velocity, and cloud-base updraft fraction.

  1. Stabilization of lead lithium iron tungstate with adding barium titanate

    SciTech Connect (OSTI)

    Lu, C.; Fang, B.

    1997-01-01

    The kinetics of formation, phase stabilities, and dielectric constants of Pb(Li{sub 1/4}Fe{sub 1/4}W{sub 1/2})O{sub 3} and BaTiO{sub 3}-added Pb(Li{sub 1/4}Fe{sub 1/4}W{sub 1/2})O{sub 3} have been compared. The addition of 2 mol{percent} BaTiO{sub 3} in Pb(Li{sub 1/4}Fe{sub 1/4}W{sub 1/2})O{sub 3} was confirmed to promote the complete formation of the perovskite phase at 700{degree}C. Also the thermal stability of the perovskite phase was significantly enhanced, which results in an increase of the dielectric permittivity. {copyright} {ital 1997 Materials Research Society.}

  2. Station-based Surface Data Value-Added Product

    SciTech Connect (OSTI)

    Tang, Q.; Xie, S.

    2015-07-01

    This report describes the Atmospheric Radiation Measurement (ARM) Best Estimate (ARMBE) station-based surface data (ARMBESTNS) value-added product. It is a twin data product of the ARMBE 2-Dimensional gridded (ARMBE2DGRID) data set. Unlike the ARMBE2DGRID data set, ARMBESTNS data are reported at the original site locations and show the original information (except for the interpolation over time). Therefore, the users have the flexibility to process the data with the approach more suitable for their applications. This document provides information about the input data, quality control (QC) method, and output format of this data set. As much of the information is identical to that of the ARMBE2DGRID data, this document will emphasize more on the different aspects of these two data sets.

  3. Sonde Adjust Value-Added Product Technical Report

    SciTech Connect (OSTI)

    Troyan, D

    2012-01-09

    The Sonde Adjust (SONDEADJUST) value-added product (VAP) creates a file that includes all fields from original Atmospheric Radiation Measurement Climate Research Facility (ARM Facility) radiosonde files and contains several value-added fields that provide adjustments related to well-known humidity issues. SONDEADJUST produces data that correct documented biases in radiosonde humidity measurements. Previous efforts towards applying some of these corrections are available via the discontinued PI product sgpsondecorr1miloC1. Unique fields contained within this datastream include smoothed original relative humidity, dry bias corrected relative humidity, and final corrected relative humidity. The smoothed RH field refines the relative humidity from integers-the resolution of the instrument-to fractions of a percent. This profile is then used to calculate the dry bias corrected field. The final correction fixes the time-lag problem and uses the dry-bias field as input into the algorithm. In addition to dry bias, solar heating is another correction that is encompassed in the final corrected RH field. Output from SONDEADJUST differs from the previous RH-corrected datastreams in important ways. First, all three types of ARM radiosondes-Vaisala RS-80, RS-90, and RS-92-are corrected using dedicated procedures and/or parameters. Second, the output variables include all of those found in the original radiosonde file: dry bulb temperature, dewpoint temperature, wind speed, wind direction, eastward wind component, northward wind component, wind status (a Vaisala-produced field used in conjunction with the Loran system), ascent rate, and original relative humidity. Additional humidity fields are smoothed relative humidity, dry biased corrected relative humidity, final ambient relative humidity, and scaled adjusted relative humidity. Third, quality control (QC) flags of the fields from the original radiosonde datastream are brought into the SONDEADJUST output file. Additional QC

  4. Aerosol Optical Depth Value-Added Product for the SAS-He Instrument...

    Office of Scientific and Technical Information (OSTI)

    Aerosol Optical Depth Value-Added Product for the SAS-He Instrument Citation Details In-Document Search Title: Aerosol Optical Depth Value-Added Product for the SAS-He Instrument ...

  5. Top Value Added Chemicals from Biomass: Volume I--Results of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Value Added Chemicals from Biomass: Volume I--Results of Screening for Potential Candidates from Sugars and Synthesis Gas Top Value Added Chemicals from Biomass: Volume I--Results ...

  6. Prototype indicators of value added through public involvement

    SciTech Connect (OSTI)

    Lach, D.; Hixson, P.; Ramonas, L.

    1995-12-01

    As more managers realize that public input in public sector decision making is a given in the current political and social climate, many are turning to public involvement as a way to manage input so that it is beneficial to their decisions and projects. Public involvement is starting to become a familiar way of doing business for many Federal agencies and its contractors. Yet, many, if not most agency and contractor managers are still unclear about the value and costs that public involvement adds to their projects. Proponents claim that public involvement increases the acceptability of project goals by increasing stakeholders` knowledge about and involvement in decisions of importance to them. In spite of these assertions avowing the benefits of public involvement, proponents have not generated methods that demonstrate or provide evidence of such value added through incorporating public involvement into projects. As these questions about the value and costs of public involvement efforts increase, there is a pressing need to document the value and costs of public involvement for the participants in these processes--the stakeholders--and to present this information to decision makers in ways that help them assess the value and costs of managing public input through a public involvement program.

  7. Exact solutions with AdS asymptotics of Einstein and Einstein-Maxwell gravity minimally coupled to a scalar field

    SciTech Connect (OSTI)

    Cadoni, Mariano; Serra, Matteo; Mignemi, Salvatore

    2011-10-15

    We propose a general method for solving exactly the static field equations of Einstein and Einstein-Maxwell gravity minimally coupled to a scalar field. Our method starts from an ansatz for the scalar field profile, and determines, together with the metric functions, the corresponding form of the scalar self-interaction potential. Using this method we prove a new no-hair theorem about the existence of hairy black-hole and black-brane solutions and derive broad classes of static solutions with radial symmetry of the theory, which may play an important role in applications of the AdS/CFT correspondence to condensed matter and strongly coupled QFTs. These solutions include: (1) four- or generic (d+2)-dimensional solutions with planar, spherical or hyperbolic horizon topology; (2) solutions with anti-de Sitter, domain wall and Lifshitz asymptotics; (3) solutions interpolating between an anti-de Sitter spacetime in the asymptotic region and a domain wall or conformal Lifshitz spacetime in the near-horizon region.

  8. Minimal unitary representation of 5d superconformal algebra F(4) and AdS6/CFT5 higher spin (super)-algebras

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Fernando, Sudarshan; Gnaydin, Murat

    2014-11-28

    We study the minimal unitary representation (minrep) of SO(5, 2), obtained by quantization of its geometric quasiconformal action, its deformations and supersymmetric extensions. The minrep of SO(5, 2) describes a massless conformal scalar field in five dimensions and admits a unique deformation which describes a massless conformal spinor. Scalar and spinor minreps of SO(5, 2) are the 5d analogs of Diracs singletons of SO(3, 2). We then construct the minimal unitary representation of the unique 5d supercon-formal algebra F(4) with the even subalgebra SO(5, 2) SU(2). The minrep of F(4) describes a massless conformal supermultiplet consisting of two scalar andmoreone spinor fields. We then extend our results to the construction of higher spin AdS6/CFT5 (super)-algebras. The Joseph ideal of the minrep of SO(5, 2) vanishes identically as operators and hence its enveloping algebra yields the AdS6/CFT5 bosonic higher spin algebra directly. The enveloping algebra of the spinor minrep defines a deformed higher spin algebra for which a deformed Joseph ideal vanishes identically as operators. These results are then extended to the construction of the unique higher spin AdS6/CFT5 superalgebra as the enveloping algebra of the minimal unitary realization of F(4) obtained by the quasiconformal methods.less

  9. MWRRET Value-Added Product: The Retrieval of Liquid Water Path...

    Office of Scientific and Technical Information (OSTI)

    public from the National Technical Information Service, Springfield, VA at www.ntis.gov. ... microwave radiometer (MWR) Retrieval (MWRRET) value-added product (VAP) algorithm. ...

  10. MWRRET Value-Added Product: The Retrieval of Liquid Water Path...

    Office of Scientific and Technical Information (OSTI)

    MWRRET Value-Added Product: The Retrieval of Liquid Water Path and Precipitable Water Vapor from Microwave Radiometer (MWR) Data Sets (Revision 2) Citation Details In-Document ...

  11. Evaluation of the Ad Council/DOE "What's Your Excuse" Public Service

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Advertising Campaign | Department of Energy Ad Council/DOE "What's Your Excuse" Public Service Advertising Campaign Evaluation of the Ad Council/DOE "What's Your Excuse" Public Service Advertising Campaign Evaluation of the Ad Council/DOE "What's Your Excuse" Public Service Advertising Campaign, June 2010, a document prepared for the U.S. Department of Energy's Office of Energy Efficiency and Renewable Energy. Ad Council Campaign Evaluation (1.88 MB) More

  12. High resolution A/D conversion based on piecewise conversion at lower resolution

    DOE Patents [OSTI]

    Terwilliger, Steve

    2012-06-05

    Piecewise conversion of an analog input signal is performed utilizing a plurality of relatively lower bit resolution A/D conversions. The results of this piecewise conversion are interpreted to achieve a relatively higher bit resolution A/D conversion without sampling frequency penalty.

  13. ADS genes for reducing saturated fatty acid levels in seed oils

    DOE Patents [OSTI]

    Heilmann, Ingo H; Shanklin, John

    2014-03-18

    The present invention relates to enzymes involved in lipid metabolism. In particular, the present invention provides coding sequences for Arabidopsis Desaturases (ADS), the encoded ADS polypeptides, and methods for using the sequences and encoded polypeptides, where such methods include decreasing and increasing saturated fatty acid content in plant seed oils.

  14. ADS genes for reducing saturated fatty acid levels in seed oils

    DOE Patents [OSTI]

    Heilmann, Ingo H.; Shanklin, John

    2010-02-02

    The present invention relates to enzymes involved in lipid metabolism. In particular, the present invention provides coding sequences for Arabidopsis Desaturases (ADS), the encoded ADS polypeptides, and methods for using the sequences and encoded polypeptides, where such methods include decreasing and increasing saturated fatty acid content in plant seed oils.

  15. Scattering Amplitudes, the AdS/CFT Correspondence, Minimal Surfaces, and Integrability

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Alday, Luis F.

    2010-01-01

    We focus on the computation of scattering amplitudes of planar maximally supersymmetric Yang-Mill in four dimensions at strong coupling by means of the AdS/CFT correspondence and explain how the problem boils down to the computation of minimal surfaces in AdS in the first part of this paper. In the second part of this review we explain how integrability allows to give a solution to the problem in terms of a set of integral equations. The intention of the review is to give a pedagogical, rather than very detailed, exposition.

  16. CYBERSECURITY AND USER ACCOUNTABILITY IN THE C-AD CONTROL SYSTEM

    SciTech Connect (OSTI)

    MORRIS,J.T.; BINELLO, S.; D OTTAVIO, T.; KATZ, R.A.

    2007-10-15

    A heightened awareness of cybersecurity has led to a review of the procedures that ensure user accountability for actions performed on the computers of the Collider-Accelerator Department (C-AD) Control System. Control system consoles are shared by multiple users in control rooms throughout the C-AD complex. A significant challenge has been the establishment of procedures that securely control and monitor access to these shared consoles without impeding accelerator operations. This paper provides an overview of C-AD cybersecurity strategies with an emphasis on recent enhancements in user authentication and tracking methods.

  17. EIA Energy Efficiency-Table 3d. Value Added by Selected Industries...

    Gasoline and Diesel Fuel Update (EIA)

    d Page Last Modified: May 2010 Table 3d. Value Added1 by Selected Industries, 1998, 2002, and 2006 (Current Brillion Dollars) MECS Survey Years NAICS Subsector and Industry 1998...

  18. EIA Energy Efficiency-Table 4d. Value Added by Selected Industries...

    Gasoline and Diesel Fuel Update (EIA)

    d Page Last Modified: May 2010 Table 4d. Value Added1 by Selected Industries, 1998, 2002, and 2006 (Billion 2000 Dollars 2) MECS Survey Years NAICS Subsector and Industry 1998 2002...

  19. Toward the AdS/CFT gravity dual for high energy collisions. II...

    Office of Scientific and Technical Information (OSTI)

    II. The stress tensor on the boundary Citation Details In-Document Search Title: Toward the AdSCFT gravity dual for high energy collisions. II. The stress tensor on the boundary ...

  20. DOE/SC-ARM/TR-100 Raman Lidar Profiles Best Estimate Value-Added...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    0 Raman Lidar Profiles Best Estimate Value-Added Product Technical Report R Newsom January 2012 DISCLAIMER This report was prepared as an account of work sponsored by the U.S. ...

  1. Top Value Added Chemicals from Biomass: Volume I--Results of Screening for

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Potential Candidates from Sugars and Synthesis Gas | Department of Energy Value Added Chemicals from Biomass: Volume I--Results of Screening for Potential Candidates from Sugars and Synthesis Gas Top Value Added Chemicals from Biomass: Volume I--Results of Screening for Potential Candidates from Sugars and Synthesis Gas This report identifies twelve building block chemicals that can be produced from sugars via biological or chemical conversions. 35523.pdf (1.41 MB) More Documents &

  2. Top Value-Added Chemicals from Biomass - Volume II„Results of Screening

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    for Potential Candidates from Biorefinery Lignin | Department of Energy Value-Added Chemicals from Biomass - Volume II„Results of Screening for Potential Candidates from Biorefinery Lignin Top Value-Added Chemicals from Biomass - Volume II„Results of Screening for Potential Candidates from Biorefinery Lignin This report evaluates lignins role as a renewable raw material resource. pnnl-16983.pdf (1006.18 KB) More Documents & Publications Low Cost Carbon Fiber from Renewable Resources

  3. AdS/QCD and Applications of Light-Front Holography

    SciTech Connect (OSTI)

    Brodsky, Stanley J.; Cao, Fu-Guang; de Teramond, Guy F.; /Costa Rica U.

    2012-02-16

    Light-Front Holography leads to a rigorous connection between hadronic amplitudes in a higher dimensional anti-de Sitter (AdS) space and frame-independent light-front wavefunctions of hadrons in 3 + 1 physical space-time, thus providing a compelling physical interpretation of the AdS/CFT correspondence principle and AdS/QCD, a useful framework which describes the correspondence between theories in a modified AdS5 background and confining field theories in physical space-time. To a first semiclassical approximation, where quantum loops and quark masses are not included, this approach leads to a single-variable light-front Schroedinger equation which determines the eigenspectrum and the light-front wavefunctions of hadrons for general spin and orbital angular momentum. The coordinate z in AdS space is uniquely identified with a Lorentz-invariant coordinate {zeta} which measures the separation of the constituents within a hadron at equal light-front time. The internal structure of hadrons is explicitly introduced and the angular momentum of the constituents plays a key role. We give an overview of the light-front holographic approach to strongly coupled QCD. In particular, we study the photon-to-meson transition form factors (TFFs) F{sub M{gamma}}(Q{sup 2}) for {gamma}{gamma}* {yields} M using light-front holographic methods. The results for the TFFs for the {eta} and {eta}' mesons are also presented. Some novel features of QCD are discussed, including the consequences of confinement for quark and gluon condensates. A method for computing the hadronization of quark and gluon jets at the amplitude level is outlined.

  4. Expert Meeting Report: Key Innovations for Adding Energy Efficiency to Maintenance Projects

    SciTech Connect (OSTI)

    Wood, A.; Wiehagen, J.

    2012-09-01

    This report describes an expert meeting hosted by the Building America research team NAHB Research Center, which was held on February 8, 2012, in Orlando, Florida. The topic, Key Innovations for Adding Energy Efficiency to Maintenance Projects, was intended to provide direction to more focused efforts to increase the efficiency of existing homes; in this meeting, the focus was specifically for re-roofing and the opportunities for adding energy efficiency upgrades during this major home repair activity.

  5. Building America Expert Meeting: Key Innovations for Adding Energy Efficiency to Maintenance Projects

    Office of Energy Efficiency and Renewable Energy (EERE)

    This report describes an expert meeting hosted by the Building America research team NAHB Research Center, which was held on February 8, 2012, in Orlando, Florida. The topic, Key Innovations for Adding Energy Efficiency to Maintenance Projects, was intended to provide direction to more focused efforts to increase the efficiency of existing homes; in this meeting, the focus was specifically for re-roofing and the opportunities for adding energy efficiency upgrades during this major home repair activity.

  6. DOE Announces Webinars on Adding Solar to Your Building Portfolio, How to

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Use DOE's Newest Facilities, and More | Department of Energy Adding Solar to Your Building Portfolio, How to Use DOE's Newest Facilities, and More DOE Announces Webinars on Adding Solar to Your Building Portfolio, How to Use DOE's Newest Facilities, and More February 27, 2014 - 4:48pm Addthis EERE offers webinars to the public on a range of subjects, from adopting the latest energy efficiency and renewable energy technologies to training for the clean energy workforce. Webinars are free;

  7. Cloud Optical Properties from the Multifilter Shadowband Radiometer (MFRSRCLDOD). An ARM Value-Added Product

    SciTech Connect (OSTI)

    Turner, D. D.; McFarlane, S. A.; Riihimaki, L.; Shi, Y.; Lo, C.; Min, Q.

    2014-02-01

    The microphysical properties of clouds play an important role in studies of global climate change. Observations from satellites and surface-based systems have been used to infer cloud optical depth and effective radius. Min and Harrison (1996) developed an inversion method to infer the optical depth of liquid water clouds from narrow band spectral Multifilter Rotating Shadowband Radiometer (MFRSR) measurements (Harrison et al. 1994). Their retrieval also uses the total liquid water path (LWP) measured by a microwave radiometer (MWR) to obtain the effective radius of the warm cloud droplets. Their results were compared with Geostationary Operational Environmental Satellite (GOES) retrieved values at the Atmospheric Radiation Measurement (ARM) Southern Great Plains (SGP) site (Min and Harrison 1996). Min et al. (2003) also validated the retrieved cloud optical properties against in situ observations, showing that the retrieved cloud effective radius agreed well with the in situ forward scattering spectrometer probe observations. The retrieved cloud optical properties from Min et al. (2003) were used also as inputs to an atmospheric shortwave model, and the computed fluxes were compared with surface pyranometer observations.

  8. Nonasymptotically AdS/dS solutions and their higher dimensional origins

    SciTech Connect (OSTI)

    Cai Ronggen; Wang Anzhong

    2004-10-15

    We look for and analyze in some details some exact solutions of Einstein-Maxwell-dilaton gravity with one or two Liouville-type dilaton potential(s) in an arbitrary dimension. Such a theory could be obtained by dimensionally reducing Einstein-Maxwell theory with a cosmological constant to a lower dimension. These (neutral/magnetic/electric charged) solutions can have a (two) black hole horizon(s), cosmological horizon, or a naked singularity. Black hole horizon or cosmological horizon of these solutions can be a hypersurface of positive, zero or negative constant curvature. These exact solutions are neither asymptotically flat, nor asymptotically AdS/dS. But some of them can be uplifted to a higher dimension, and those higher dimensional solutions are either asymptotically flat, or asymptotically AdS/dS with/without a compact constant curvature space. This observation is useful to better understand holographic properties of these nonasymptotically AdS/dS solutions.

  9. Adding Links in Energy.gov Content Management System | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy.gov Content Management System » Adding Links in Energy.gov Content Management System Adding Links in Energy.gov Content Management System For Office of Energy Efficiency and Renewable Energy (EERE) websites, to add a link in the Energy.gov Drupal content management system (CMS), follow these steps: Edit the page (also called a node) that you want to add a link to. Select the text you want to link. Click the "Link" button. Then: If you are linking to a page on Energy.gov, select

  10. Adding "Utilization" to Carbon Capture and Storage | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Adding "Utilization" to Carbon Capture and Storage Adding "Utilization" to Carbon Capture and Storage May 1, 2012 - 4:23pm Addthis Greater application of CO2-EOR could yield a significant boost to the U.S. economy, including increased economic activity, improved balance of trade, job creation, and reduced oil imports. Greater application of CO2-EOR could yield a significant boost to the U.S. economy, including increased economic activity, improved balance of trade,

  11. Process and apparatus for adding and removing particles from pressurized reactors

    DOE Patents [OSTI]

    Milligan, John D.

    1983-01-01

    A method for adding and removing fine particles from a pressurized reactor is provided, which comprises connecting the reactor to a container, sealing the container from the reactor, filling the container with particles and a liquid material compatible with the reactants, pressurizing the container to substantially the reactor pressure, removing the seal between the reactor and the container, permitting particles to fall into or out of the reactor, and resealing the container from the reactor. An apparatus for adding and removing particles is also disclosed.

  12. I INSTRUCTIONS: FROM: Accountability Station Energy Library, AD-622.1/GTN

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    I INSTRUCTIONS: FROM: Accountability Station Energy Library, AD-622.1/GTN U.S. Department of Energy P.O. Box A Germantown, MD 20874 Document Number Copy Series Classi- fication Date Due TO: I have personally received the material identified above and assume full responsibility for its safe handling in accordance with existing regulations. Date Signature Postal Registry No. AD F 1430.1 (11-92) U.S. DEPARTMENT OF ENERGY WASHINGTON, D.C. ENERGY LIBRARY CLASSIFIED RECEIPT NO. T 1. Original of this

  13. G-Band Vapor Radiometer Precipitable Water Vapor (GVRPWV) Value-Added Product

    SciTech Connect (OSTI)

    Koontz, A; Cadeddu, M

    2012-12-05

    The G-Band Vapor Radiometer Precipitable Water Vapor (GVRPWV) value-added product (VAP) computes precipitable water vapor using neural network techniques from data measured by the GVR. The GVR reports time-series measurements of brightness temperatures for four channels located at 183.3 ± 1, 3, 7, and 14 GHz.

  14. Superstrings on AdS{sub 4}xCP{sup 3} from supergravity

    SciTech Connect (OSTI)

    D'Auria, Riccardo; Trigiante, Mario; Fre, Pietro; Grassi, Pietro Antonio

    2009-04-15

    We derive from a general formulation of pure spinor string theory on type IIA backgrounds the specific form of the action for the AdS{sub 4}xCP{sup 3} background. We provide a complete geometrical characterization of the structure of the superfields involved in the action.

  15. Expert Meeting Report. Key Innovations for Adding Energy Efficiency to Maintenance Projects

    SciTech Connect (OSTI)

    Wood, A.; Wiehagen, J.

    2012-09-01

    This report describes an expert meeting hosted by the Building America research team NAHB Research Center, which was held on February 8, 2012, in Orlando, Florida. The topic focused on efforts to increase the efficiency of existing homes, specifically for re-roofing and the opportunities for adding energy efficiency upgrades during this major home repair activity.

  16. Evaluation of the Ad Council/DOE Whats Your ExcuseŽ Public...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... Across all four outcomes, one or both of the control variables (predilection to save energy and perceived difficulty of saving energy) were statistically significant. Ad ...

  17. PNNI routing support for ad hoc mobile networking: A flat architecture

    SciTech Connect (OSTI)

    Martinez, L.; Sholander, P.; Tolendino, L.

    1997-12-01

    This contribution extends the Outside Nodal Hierarchy List (ONHL) procedures described in ATM Form Contribution 97-0766. These extensions allow multiple mobile networks to form either an ad hoc network or an extension of a fixed PNNI infrastructure. This contribution covers the simplest case where the top-most Logical Group Nodes (LGNs), in those mobile networks, all reside at the same level in a PNNI hierarchy. Future contributions will cover the general case where those top-most LGNs reside at different hierarchy levels. This contribution considers a flat ad hoc network architecture--in the sense that each mobile network always participates in the PNNI hierarchy at the preconfigured level of its top-most LGN.

  18. First measurement of ADS parameters using $B^- \\to D^0K^-$ decays in hadron collisions

    SciTech Connect (OSTI)

    Garosi, Paola; /Siena U. /INFN, Pisa

    2011-06-01

    Measurements of branching fractions and CP-asymmetries of B{sup -} {yields} D{sup 0}K{sup -} modes allow a theoretically-clean extraction of the CKM angle {gamma}. The method proposed by Atwood, Dunietz and Soni (ADS) makes use of a decay chain where color and Cabibbo suppression interfere, which produces large CP-violating asymmetries. The CDF experiment reports the first measurement at a hadron collider of branching fractions and CP-asymmetries of suppressed B{sup -} {yields} D{sup 0}h{sup -} signals, where h is {pi} or K. Using 5.0 fb{sup -1} of data we found a combined significance exceeding 5{sigma} and we determined the ADS parameters with accuracy comparable with B-factories.

  19. Dilatonic repulsons and confinement via the AdS/CFT correspondence

    SciTech Connect (OSTI)

    Bak, Dongsu; Gutperle, Michael; Hirano, Shinji; Ohta, Nobuyoshi

    2004-10-15

    We study a class of dilatonic deformations of asymptotically AdS{sub 5}xS{sup 5} geometry analytically and numerically. The spacetime is nonsupersymmetric and suffers from a naked singularity. We propose that the causality bound may serve as a criterion for such a geometry with a naked singularity to still make sense in the AdS/CFT correspondence. We show that the static string, the one corresponding to a large Wilson loop in the dual gauge theory, reveals confinement in a certain range of parameters of our solutions, where the singularity exhibits the repulsion that can well cloak the singularity from the static string probe. In particular, we find the exact expression for the tension of the QCD strings. We also discuss a possible interpretation of our solution in terms of unstable branes and their tachyon matter.

  20. Added Value of Reliability to a Microgrid: Simulations of Three California Buildings

    SciTech Connect (OSTI)

    Marnay, Chris; Lai, Judy; Stadler, Michael; Siddiqui, Afzal

    2009-05-07

    The Distributed Energy Resources Customer Adoption Model is used to estimate the value an Oakland nursing home, a Riverside high school, and a Sunnyvale data center would need to put on higher electricity service reliability for them to adopt a Consortium for Electric Reliability Technology Solutions Microgrid (CM) based on economics alone. A fraction of each building's load is deemed critical based on its mission, and the added cost of CM capability to meet it added to on-site generation options. The three sites are analyzed with various resources available as microgrid components. Results show that the value placed on higher reliability often does not have to be significant for CM to appear attractive, about 25 $/kWcdota and up, but the carbon footprint consequences are mixed because storage is often used to shift cheaper off-peak electricity to use during afternoon hours in competition with the solar sources.

  1. Exact quantization of a superparticle in AdS{sub 5}xS{sup 5}

    SciTech Connect (OSTI)

    Horigane, Tetsuo; Kazama, Yoichi

    2010-02-15

    As a step toward deeper understanding of the AdS/CFT correspondence, exact quantization of a Brink-Schwarz superparticle in the AdS{sub 5}xS{sup 5} background with Ramond-Ramond flux is performed from the first principle in the phase space formulation. It includes the construction of the quantum Noether charges for the psu(2,2|4) superconformal symmetry and by solving the superconformal primary conditions we obtain the complete physical spectrum of the system with the explicit wave functions. The spectrum agrees precisely with the supergravity results, including all the Kaluza-Klein excitations. Our method and the result are expected to shed light on the eventual quantization of a superstring in this important background.

  2. Methods for conversion of carbohydrates in ionic liquids to value-added chemicals

    DOE Patents [OSTI]

    Zhao, Haibo; Holladay, Johnathan E.

    2011-05-10

    Methods are described for converting carbohydrates including, e.g., monosaccharides, disaccharides, and polysaccharides in ionic liquids to value-added chemicals including furans, useful as chemical intermediates and/or feedstocks. Fructose is converted to 5-hydroxylmethylfurfural (HMF) in the presence of metal halide and acid catalysts. Glucose is effectively converted to HMF in the presence of chromium chloride catalysts. Yields of up to about 70% are achieved with low levels of impurities such as levulinic acid.

  3. Quality improvement of pyrolysis oil from waste rubber by adding sawdust

    SciTech Connect (OSTI)

    Wang, Wen-liang; Chang, Jian-min; Cai, Li-ping; Shi, Sheldon Q.

    2014-12-15

    Highlights: • Rubber-pyrolysis oil is difficult to be fuel due to high proportion of PAHs. • The efficiency of pyrolysis was increased as the percentage of sawdust increased. • The adding of sawdust improved pyrolysis oil quality by reducing the PAHs content. • Adding sawdust reduced nitrogen/sulfur in oil and was easier to convert to diesel. - Abstract: This work was aimed at improving the pyrolysis oil quality of waste rubber by adding larch sawdust. Using a 1 kg/h stainless pyrolysis reactor, the contents of sawdust in rubber were gradually increased from 0%, 50%, 100% and 200% (wt%) during the pyrolysis process. Using a thermo-gravimetric (TG) analyzer coupled with Fourier transform infrared (FTIR) analysis of evolving products (TG–FTIR), the weight loss characteristics of the heat under different mixtures of sawdust/rubber were observed. Using the pyrolysis–gas chromatography (GC)–mass spectrometry (Py–GC/MS), the vapors from the pyrolysis processes were collected and the compositions of the vapors were examined. During the pyrolysis process, the recovery of the pyrolysis gas and its composition were measured in-situ at a reaction temperature of 450 °C and a retaining time of 1.2 s. The results indicated that the efficiency of pyrolysis was increased and the residual carbon was reduced as the percentage of sawdust increased. The adding of sawdust significantly improved the pyrolysis oil quality by reducing the polycyclic aromatic hydrocarbons (PAHs) and nitrogen and sulfur compounds contents, resulting in an improvement in the combustion efficiency of the pyrolysis oil.

  4. ARM Climate Research Facility Quarterly Value-Added Product Report, Fourth Quarter

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    72 ARM Climate Research Facility Quarterly Value-Added Product Report C Sivaraman October 2015 DISCLAIMER This report was prepared as an account of work sponsored by the U.S. Government. Neither the United States nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not

  5. DOE/SC-ARM-TR-140 Droplet Number Concentration Value-Added Product

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    0 Droplet Number Concentration Value-Added Product L Riihimaki S McFarlane C Sivaraman June 2014 Version 1.0 DISCLAIMER This report was prepared as an account of work sponsored by the U.S. Government. Neither the United States nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its

  6. DOE/SC-ARM/TR-087 Merged Sounding Value-Added Product D Troyan

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    87 Merged Sounding Value-Added Product D Troyan March 2012 DISCLAIMER This report was prepared as an account of work sponsored by the U.S. Government. Neither the United States nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights.

  7. DOE/SC-ARM/TR-098 Micropulse Lidar Cloud Mask Value-Added Product Technical Report

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    8 Micropulse Lidar Cloud Mask Value-Added Product Technical Report C Sivaraman J Comstock July 2011 DISCLAIMER This report was prepared as an account of work sponsored by the U.S. Government. Neither the United States nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would

  8. DOE/SC-ARM/TR-115 Aerosol Best Estimate (AEROSOLBE) Value-Added Product

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    5 Aerosol Best Estimate (AEROSOLBE) Value-Added Product C Flynn D Turner A Koontz D Chand C Sivaraman July 2012 DISCLAIMER This report was prepared as an account of work sponsored by the U.S. Government. Neither the United States nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that

  9. DOE/SC-ARM/TR-129 Aerosol Optical Depth Value-Added Product

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    9 Aerosol Optical Depth Value-Added Product A Koontz C Flynn G Hodges J Michalsky J Barnard March 2013 DISCLAIMER This report was prepared as an account of work sponsored by the U.S. Government. Neither the United States nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use

  10. Microsoft Word - ARM Value-Added Product_tech_rpt_v2.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    77 An Atmospheric Radiation Measurement Value-Added Product to Retrieve Optically Thin Cloud Visible Optical Depth using Micropulse Lidar October 2006 Chaomei Lo Jennifer M. Comstock Connor Flynn Pacific Northwest National Laboratory Richland, Washington Work supported by the U.S. Department of Energy, Office of Energy Research, Office of Biological and Environmental Research C Lo, JM Comstock, C Flynn, October 2006, ARM TR-077 iii Contents 1 Introduction

  11. Catalytic Conversion of Biomass-derived Feedstock (HMF) into Value Added

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Chemicals and Biofuels - Energy Innovation Portal Industrial Technologies Industrial Technologies Biomass and Biofuels Biomass and Biofuels Find More Like This Return to Search Catalytic Conversion of Biomass-derived Feedstock (HMF) into Value Added Chemicals and Biofuels Colorado State University Contact CSU About This Technology Technology Marketing Summary A catalytic reaction system by which the biomass-derived feedstock chemical HMF can be upgraded into a higher carbon content

  12. Recent Developments on the Broadband Heating Rate Profile Value-Added Product

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Recent Developments on the Broadband Heating Rate Profile Value-Added Product E. J. Mlawer, J. S. Delamere, and S. A. Clough Atmospheric and Environmental Research, Inc. Cambridge, Massachusetts M. A. Miller and K. L. Johnson Brookhaven National Laboratory Upton, New York T. R. Shippert and C. N. Long Pacific Northwest National Laboratory Richland, Washington R. G. Ellingson Florida State University Tallahassee, Florida M. H. Zhang State University of New York - Stony Brook Albany, New York R.

  13. Method for conversion of carbohydrate polymers to value-added chemical products

    DOE Patents [OSTI]

    Zhang, Zongchao C.; Brown, Heather M.; Su, Yu

    2012-02-07

    Methods are described for conversion of carbohydrate polymers in ionic liquids, including cellulose, that yield value-added chemicals including, e.g., glucose and 5-hydroxylmethylfurfural (HMF) at temperatures below 120.degree. C. Catalyst compositions that include various mixed metal halides are described that are selective for specified products with yields, e.g., of up to about 56% in a single step process.

  14. Flying across Galaxy Clusters with Google Earth: additional imagery from SDSS co-added data

    SciTech Connect (OSTI)

    Hao, Jiangang; Annis, James; /Fermilab

    2010-10-01

    Galaxy clusters are spectacular. We provide a Google Earth compatible imagery for the deep co-added images from the Sloan Digital Sky Survey and make it a tool for examing galaxy clusters. Google Earth (in sky mode) provides a highly interactive environment for visualizing the sky. By encoding the galaxy cluster information into a kml/kmz file, one can use Google Earth as a tool for examining galaxy clusters and fly across them freely. However, the resolution of the images provided by Google Earth is not very high. This is partially because the major imagery google earth used is from Sloan Digital Sky Survey (SDSS) (SDSS collaboration 2000) and the resolutions have been reduced to speed up the web transferring. To have higher resolution images, you need to add your own images in a way that Google Earth can understand. The SDSS co-added data are the co-addition of {approx}100 scans of images from SDSS stripe 82 (Annis et al. 2010). It provides the deepest images based on SDSS and reach as deep as about redshift 1.0. Based on the co-added images, we created color images in a way as described by Lupton et al. (2004) and convert the color images to Google Earth compatible images using wcs2kml (Brewer et al. 2007). The images are stored at a public server at Fermi National Accelerator Laboratory and can be accessed by the public. To view those images in Google Earth, you need to download a kmz file, which contains the links to the color images, and then open the kmz file with your Google Earth. To meet different needs for resolutions, we provide three kmz files corresponding to low, medium and high resolution images. We recommend the high resolution one as long as you have a broadband Internet connection, though you should choose to download any of them, depending on your own needs and Internet speed. After you open the downloaded kmz file with Google Earth (in sky mode), it takes about 5 minutes (depending on your Internet connection and the resolution of images you

  15. DOE/SC-ARM/TR-133 Aerosol Optical Depth Value-Added

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    3 Aerosol Optical Depth Value-Added Product for the SAS-He Instrument B Ermold CJ Flynn J Barnard September 2013 Version 1.0 DISCLAIMER This report was prepared as an account of work sponsored by the U.S. Government. Neither the United States nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or

  16. System for adding sulfur to a fuel cell stack system for improved fuel cell stability

    DOE Patents [OSTI]

    Mukerjee, Subhasish; Haltiner, Jr., Karl J; Weissman, Jeffrey G

    2013-08-13

    A system for adding sulfur to a reformate stream feeding a fuel cell stack, having a sulfur source for providing sulfur to the reformate stream and a metering device in fluid connection with the sulfur source and the reformate stream. The metering device injects sulfur from the sulfur source to the reformate stream at a predetermined rate, thereby providing a conditioned reformate stream to the fuel cell stack. The system provides a conditioned reformate stream having a predetermined sulfur concentration that gives an acceptable balance of minimal drop in initial power with the desired maximum stability of operation over prolonged periods for the fuel cell stack.

  17. Reconstruction of spatial patterns of climatic anomalies during the medieval warm period (AD 900-1300)

    SciTech Connect (OSTI)

    Diaz, H.F.; Hughes, M.K.

    1992-12-31

    The workshop will focus on climatic variations during the Medieval Warm Period or Little Climatic Optimum. The nominal time interval assigned to this period is AD 900--1300, but climate information available during the century or two preceding and following this episode is welcome. The aims of the workshop will be to: examine the available evidence for the existence of this episode; assess the spatial and temporal synchronicity of the climatic signals; discuss possible forcing mechanisms; and identify areas and paleoenvironmental records where additional research efforts are needed to improve our knowledge of this period. This document consists of abstracts of eighteen papers presented at the meeting.

  18. Functionally gradient material for membrane reactors to convert methane gas into value-added products

    DOE Patents [OSTI]

    Balachandran, U.; Dusek, J.T.; Kleefisch, M.S.; Kobylinski, T.P.

    1996-11-12

    A functionally gradient material for a membrane reactor for converting methane gas into value-added-products includes an outer tube of perovskite, which contacts air; an inner tube which contacts methane gas, of zirconium oxide, and a bonding layer between the perovskite and zirconium oxide layers. The bonding layer has one or more layers of a mixture of perovskite and zirconium oxide, with the layers transitioning from an excess of perovskite to an excess of zirconium oxide. The transition layers match thermal expansion coefficients and other physical properties between the two different materials. 7 figs.

  19. Functionally gradient material for membrane reactors to convert methane gas into value-added products

    DOE Patents [OSTI]

    Balachandran, Uthamalingam; Dusek, Joseph T.; Kleefisch, Mark S.; Kobylinski, Thadeus P.

    1996-01-01

    A functionally gradient material for a membrane reactor for converting methane gas into value-added-products includes an outer tube of perovskite, which contacts air; an inner tube which contacts methane gas, of zirconium oxide, and a bonding layer between the perovskite and zirconium oxide layers. The bonding layer has one or more layers of a mixture of perovskite and zirconium oxide, with the layers transitioning from an excess of perovskite to an excess of zirconium oxide. The transition layers match thermal expansion coefficients and other physical properties between the two different materials.

  20. Atmospheric Radiation Measurement (ARM) Value-Added Data Products (Including Evaluated Data Sets)

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Many of the scientific needs of the ARM Program are met through the analysis and processing of existing data products into "value-added" products or VAPs. Despite extensive instrumentation deployed at the ARM sites, there will always be quantities of interest that are either impractical or impossible to measure directly or routinely. Physical models using ARM instrument data as inputs are implemented as VAPs and can help fill some of the unmet measurement needs of the Program. Conversely, ARM produces some VAPs not in order to fill unmet measurement needs, but instead to improve the quality of existing measurements. In addition, when more than one measurement is available, ARM also produces "best estimate" VAPs. A special class of VAP called a Quality Measurement Experiment (QME) adds value to the input data streams by providing for continuous assessment of the quality of the input data. [taken from http://www.arm.gov/data/vaps_all.php] One of the ARM data centers, the External Data Center or XDC at Brookhaven National Laboratory, also adds value to ARM information by identifying sources and acquiring external data to augment the data being generated within the program. These external data sets are converted, processed, and carefully evaluated for their value to the overall ARM program. /. Data Plots are also value-added products from ARM.

  1. Combustion process and nitrogen oxides emission of Shenmu coal added with sodium acetate

    SciTech Connect (OSTI)

    Yang Weijuan; Zhou Junhu; Liu Maosheng; Zhou Zhijun; Liu Jianzhong; Cen Kefa

    2007-09-15

    Shenmu bituminous coal with 4% sodium acetate added was used to investigate the characteristics of combustion and nitrogen oxide (NOx) release in a fixed bed reactor heated by a tube furnace. The composition of the flue gas was analyzed to investigate the effects of sodium acetate on the combustion process and NOx emission. The experiments were carried out in a partial reductive atmosphere and a strong oxidative atmosphere. The O{sub 2} valley value in the partial reductive atmosphere was reduced by the added sodium acetate. Sodium acetate accelerated the combustion and shortened the combustion process. The experimental results showed that the emissions of NO, NO{sub 2}, and N{sub 2}O were affected by the reacting atmosphere and the combustion temperature. In the strong oxidative atmosphere, sodium acetate resulted in a slight NOx reduction. In the partial reductive atmosphere, sodium acetate reduced both the peak value of NO concentration and the total NO emission significantly. An over 30% NOx reduction efficiency was achieved at 900{sup o}C in the partial reductive atmosphere, which decreased with the increase in temperature. Sodium acetate was decomposed into hydrocarbon radicals and sodium hydroxide, which can both reduce NOx emissions due to their special reactions with the nitrogen component. 17 refs., 11 figs., 2 tabs.

  2. Value Added Products from Hemicellulose Utilization in Dry Mill Ethanol Plants

    SciTech Connect (OSTI)

    Rodney Williamson, ICPB; John Magnuson, PNNL; David Reed, INL; Marco Baez, Dyadic; Marion Bradford, ICPB

    2007-03-30

    The Iowa Corn Promotion Board is the principal contracting entity for this grant funded by the US Department of Agriculture and managed by the US Department of Energy. The Iowa Corn Promotion Board subcontracted with New Jersey Institute of Technology, KiwiChem, Pacific Northwest National Lab and Idaho National Lab to conduct research for this project. KiwiChem conducted the economic engineering assessment of a dry-mill ethanol plant. New Jersey Institute of Technology conducted work on incorporating the organic acids into polymers. Pacific Northwest National Lab conducted work in hydrolysis of hemicellulose, fermentation and chemical catalysis of sugars to value-added chemicals. Idaho National Lab engineered an organism to ferment a specific organic acid. Dyadic, an enzme company, was a collaborator which provided in-kind support for the project. The Iowa Corn Promotion Board collaborated with the Ohio Corn Marketing Board and the Minnesota Corn Merchandising Council in providing cost share for the project. The purpose of this diverse collaboration was to integrate the hydrolysis, the conversion and the polymer applications into one project and increase the likelihood of success. This project had two primary goals: (1) to hydrolyze the hemicellulose fraction of the distillers grain (DG) coproduct coming from the dry-mill ethanol plants and (2) convert the sugars derived from the hemicellulose into value-added co-products via fermentation and chemical catalysis.

  3. Flat space S matrix from the AdS/CFT correspondence?

    SciTech Connect (OSTI)

    Gary, Michael; Giddings, Steven B.

    2009-08-15

    We investigate recovery of the bulk S matrix from the AdS/CFT correspondence, at large radius. It was recently argued that some of the elements of the S matrix might be read from CFT correlators, given a particular singularity structure of the latter, but leaving the question of more general S matrix elements. Since in AdS/CFT, data must be specified on the boundary, we find certain limitations on the corresponding bulk wave packets and on their localization properties. In particular, those we have found that approximately localize have low-energy tails, and corresponding power-law tails in position space. When their scattering is compared to that of 'sharper' wave packets typically used in scattering theory, one finds apparently significant differences, suggesting a possible lack of resolution via these wave packets. We also give arguments that construction of the sharper wave packets may require nonperturbative control of the boundary theory, and particularly of the N{sup 2} matrix degrees of freedom. These observations thus raise interesting questions about what principle would guarantee the appropriate control, and about how a boundary CFT can accurately approximate the flat space S matrix.

  4. Value-Added Products from FGD Sulfite-Rich Scrubber Materials

    SciTech Connect (OSTI)

    Vivak Malhotra

    2010-01-31

    According to the American Coal Ash Association, about 29.25 million tons of flue gas desulfurization (FGD) byproducts were produced in the USA in 2003. Out of 29.25 million tons, 17.35 million tons were sulfite-rich scrubber materials. At present, unlike its cousin FGD gypsum, the prospect for effective utilization of sulfite-rich scrubber materials is not bright. In fact, almost 16.9 million tons are leftover every year. In our pursuit to mitigate the liability of sulfite-rich FGD scrubber materials' disposal, we are attempting to develop value-added products that can commercially compete. More specifically, for this Innovative Concept Phase I project, we have the following objectives: to characterize the sulfite-rich scrubber material for toxic metals; to optimize the co-blending and processing of scrubber material and natural byproducts; to formulate and develop structural composites from sulfite-rich scrubber material; and to evaluate the composites' mechanical properties and compare them with current products on the market. After successfully demonstrating the viability of our research, a more comprehensive approach will be proposed to take these value-added materials to fruition.

  5. Energy-efficient distributed constructions of miniumum spanning tree for wireless ad-hoc networks

    SciTech Connect (OSTI)

    Kumar, V. S. A.; Pandurangan, G.; Khan, M.

    2004-01-01

    The Minimum Spanning Tree (MST) problem is one of the most important and commonly occurring primitive in the design and operation of data and communication networks. While there a redistributed algorithms for the MST problem these require relatively large number of messages and time, and are fairly involved, require synchronization and a lot of book keeping; this makes these algorithms impractical for emerging technologies such as ad hoc and sensor networks. In such networks, a sensor has very limited power, and any algorithm needs to be simple, local and energy efficient for being practical. Motivated by these considerations, we study the performance of a class of simple and local algorithms called Nearest Neighbor Tree (NNT) algorithms for energy-efficient construction of MSTs in a wireless ad hoc setting. These employ a very simple idea to eliminate the work involved in cycle detection in other MST algorithms: each node chooses a distinct rank, and connects to the closest node of higher rank. We consider two variants of the NNT algorithms, obtained by two ways of choosing the ranks: (i) Random NNT, in which each node chooses a rank randomly, and (ii) Directional NNT, in which each node uses directional information for choosing the rank. We show provable bounds on the performance of these algorithms in instances obtained by uniformly distributed points in the unit square. Finally, we perform extensive simulations of our algorithms. We tested our algorithms on both uniformly random distributions of points, and on realistic distributions of points in an urban setting. The cost of the tree found by the NNT algorithms is within a factor of 2 of the MST, but there is more than a ten-fold saving on the energy and about a five fold saving on the number of messages sent. Also, our algorithms are significantly simpler to implement compared to, for instance, the GHS algorithm, which is essentially optimal with regards to the message complexity. Thus, our results

  6. Hamiltonian Light-front Field Theory Within an AdS/QCD Basis

    SciTech Connect (OSTI)

    Vary, J.P.; Honkanen, H.; Li, Jun; Maris, P.; Brodsky, S.J.; Harindranath, A.; de Teramond, G.F.; Sternberg, P.; Ng, E.G.; Yang, C.; /LBL, Berkeley

    2009-12-16

    Non-perturbative Hamiltonian light-front quantum field theory presents opportunities and challenges that bridge particle physics and nuclear physics. Fundamental theories, such as Quantum Chromodynamics (QCD) and Quantum Electrodynamics (QED) offer the promise of great predictive power spanning phenomena on all scales from the microscopic to cosmic scales, but new tools that do not rely exclusively on perturbation theory are required to make connection from one scale to the next. We outline recent theoretical and computational progress to build these bridges and provide illustrative results for nuclear structure and quantum field theory. As our framework we choose light-front gauge and a basis function representation with two-dimensional harmonic oscillator basis for transverse modes that corresponds with eigensolutions of the soft-wall AdS/QCD model obtained from light-front holography.

  7. Process and targets for production of no-carrier-added radiotin

    DOE Patents [OSTI]

    Srivastava, Suresh C; Zhuikov, Boris Leonidovich; Ermolaev, Stanislav Victorovich; Konyakhin, Nikolay Alexandrovich; Kokhanyuk, Vladimir Mikhailovich; Khamyanov, Stepan Vladimirovich; Togaeva, Natalya Roaldovna

    2014-04-22

    One embodiment of the present invention includes a process for production and recovery of no-carrier-added radioactive tin (NCA radiotin). An antimony target can be irradiated with a beam of accelerated particles forming NCA radiotin, followed by separation of the NCA radiotin from the irradiated target. The target is metallic Sb in a hermetically sealed shell. The shell can be graphite, molybdenum, or stainless steel. The irradiated target can be removed from the shell by chemical or mechanical means, and dissolved in an acidic solution. Sb can be removed from the dissolved irradiated target by extraction. NCA radiotin can be separated from the remaining Sb and other impurities using chromatography on silica gel sorbent. NCA tin-117m can be obtained from this process. NCA tin-117m can be used for labeling organic compounds and biological objects to be applied in medicine for imaging and therapy of various diseases.

  8. System for adding sulfur to a fuel cell stack system for improved fuel cell stability

    DOE Patents [OSTI]

    Mukerjee, Subhasish; Haltiner, Jr., Karl J; Weissman, Jeffrey G.

    2012-03-06

    A system for adding sulfur to a fuel cell stack, having a reformer adapted to reform a hydrocarbon fuel stream containing sulfur contaminants, thereby providing a reformate stream having sulfur; a sulfur trap fluidly coupled downstream of the reformer for removing sulfur from the reformate stream, thereby providing a desulfurized reformate stream; and a metering device in fluid communication with the reformate stream upstream of the sulfur trap and with the desulfurized reformate stream downstream of the sulfur trap. The metering device is adapted to bypass a portion of the reformate stream to mix with the desulfurized reformate stream, thereby producing a conditioned reformate stream having a predetermined sulfur concentration that gives an acceptable balance of minimal drop in initial power with the desired maximum stability of operation over prolonged periods for the fuel cell stack.

  9. Value-Added Products From FGD Sulfite-Rich Scrubber Materials

    SciTech Connect (OSTI)

    Vivak M. Malhotra

    2006-09-30

    Massive quantities of sulfite-rich flue gas desulfurization (FGD) scrubber materials are produced every year in the USA. In fact, at present, the production of wet sulfite-rich scrubber cake outstrips the production of wet sulfate-rich scrubber cake by about 6 million tons per year. However, most of the utilization focus has centered on FGD gypsum. Therefore, we have recently initiated research on developing new strategies for the economical, but environmentally-sound, utilization of sulfite-rich scrubber material. In this exploratory project (Phase I), we attempted to ascertain whether it is feasible to develop reconstituted wood replacement products from sulfite-rich scrubber material. In pursuit of this goal, we characterized two different wet sulfite-rich scrubber materials, obtained from two power plants burning Midwestern coal, for their suitability for the development of value-added products. The overall strategy adopted was to fabricate composites where the largest ingredient was scrubber material with additional crop materials as additives. Our results suggested that it may be feasible to develop composites with flexural strength as high as 40 MPa (5800 psi) without the addition of external polymers. We also attempted to develop load-bearing composites from scrubber material, natural fibers, and phenolic polymer. The polymer-to-solid ratio was limited to {le} 0.4. The formulated composites showed flexural strengths as high as 73 MPa (10,585 psi). We plan to harness the research outcomes from Phase I to develop parameters required to upscale our value-added products in Phase II.

  10. Virtual machine-based simulation platform for mobile ad-hoc network-based cyber infrastructure

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Yoginath, Srikanth B.; Perumalla, Kayla S.; Henz, Brian J.

    2015-09-29

    In modeling and simulating complex systems such as mobile ad-hoc networks (MANETs) in de-fense communications, it is a major challenge to reconcile multiple important considerations: the rapidity of unavoidable changes to the software (network layers and applications), the difficulty of modeling the critical, implementation-dependent behavioral effects, the need to sustain larger scale scenarios, and the desire for faster simulations. Here we present our approach in success-fully reconciling them using a virtual time-synchronized virtual machine(VM)-based parallel ex-ecution framework that accurately lifts both the devices as well as the network communications to a virtual time plane while retaining full fidelity. At themore » core of our framework is a scheduling engine that operates at the level of a hypervisor scheduler, offering a unique ability to execute multi-core guest nodes over multi-core host nodes in an accurate, virtual time-synchronized manner. In contrast to other related approaches that suffer from either speed or accuracy issues, our framework provides MANET node-wise scalability, high fidelity of software behaviors, and time-ordering accuracy. The design and development of this framework is presented, and an ac-tual implementation based on the widely used Xen hypervisor system is described. Benchmarks with synthetic and actual applications are used to identify the benefits of our approach. The time inaccuracy of traditional emulation methods is demonstrated, in comparison with the accurate execution of our framework verified by theoretically correct results expected from analytical models of the same scenarios. In the largest high fidelity tests, we are able to perform virtual time-synchronized simulation of 64-node VM-based full-stack, actual software behaviors of MANETs containing a mix of static and mobile (unmanned airborne vehicle) nodes, hosted on a 32-core host, with full fidelity of unmodified ad-hoc routing protocols, unmodified

  11. Virtual machine-based simulation platform for mobile ad-hoc network-based cyber infrastructure

    SciTech Connect (OSTI)

    Yoginath, Srikanth B.; Perumalla, Kayla S.; Henz, Brian J.

    2015-09-29

    In modeling and simulating complex systems such as mobile ad-hoc networks (MANETs) in de-fense communications, it is a major challenge to reconcile multiple important considerations: the rapidity of unavoidable changes to the software (network layers and applications), the difficulty of modeling the critical, implementation-dependent behavioral effects, the need to sustain larger scale scenarios, and the desire for faster simulations. Here we present our approach in success-fully reconciling them using a virtual time-synchronized virtual machine(VM)-based parallel ex-ecution framework that accurately lifts both the devices as well as the network communications to a virtual time plane while retaining full fidelity. At the core of our framework is a scheduling engine that operates at the level of a hypervisor scheduler, offering a unique ability to execute multi-core guest nodes over multi-core host nodes in an accurate, virtual time-synchronized manner. In contrast to other related approaches that suffer from either speed or accuracy issues, our framework provides MANET node-wise scalability, high fidelity of software behaviors, and time-ordering accuracy. The design and development of this framework is presented, and an ac-tual implementation based on the widely used Xen hypervisor system is described. Benchmarks with synthetic and actual applications are used to identify the benefits of our approach. The time inaccuracy of traditional emulation methods is demonstrated, in comparison with the accurate execution of our framework verified by theoretically correct results expected from analytical models of the same scenarios. In the largest high fidelity tests, we are able to perform virtual time-synchronized simulation of 64-node VM-based full-stack, actual software behaviors of MANETs containing a mix of static and mobile (unmanned airborne vehicle) nodes, hosted on a 32-core host, with full fidelity of unmodified ad-hoc routing protocols, unmodified application

  12. Semiclassical circular strings in AdS{sub 5} and 'long' gauge field strength operators

    SciTech Connect (OSTI)

    Park, I.Y.; Tirziu, A.; Tseytlin, A.A.

    2005-06-15

    We consider circular strings rotating with equal spins S{sub 1}=S{sub 2}=S in two orthogonal planes in AdS{sub 5} and suggest that they may be dual to long gauge-theory operators built out of self-dual components of gauge field strength. As was found in hep-th/0404187, the one-loop anomalous dimensions of the such gauge-theory operators are described by an antiferromagnetic XXX{sub 1} spin chain and scale linearly with length L>>1. We find that in the case of rigid rotating string both the classical energy E{sub 0} and the 1-loop string correction E{sub 1} depend linearly on the spin S (within the stability region of the solution). This supports the identification of the rigid rotating string with the gauge-theory operator corresponding to the maximal-spin (ferromagnetic) state of the XXX{sub 1} spin chain. The energy of more general rotating and pulsating strings also happens to scale linearly with both the spin and the oscillation number. Such solutions should be dual to other lower-spin states of the spin chain, with the antiferromagnetic ground state presumably corresponding to the string pulsating in two planes with no rotation.

  13. A Time-Slotted On-Demand Routing Protocol for Mobile Ad Hoc Unmanned Vehicle Systems

    SciTech Connect (OSTI)

    Hope Forsmann; Robert Hiromoto; John Svoboda

    2007-04-01

    The popularity of UAVs has increased dramatically because of their successful deployment in military operations, their ability to preserve human life, and the continual improvements in wireless communication that serves to increase their capabilities. We believe the usefulness of UAVs would be dramatically increased if formation flight were added to the list of capabilities. Currently, sustained formation flight with a cluster of UAVs has only been achieved with two nodes by the Multi-UAV Testbed at the Massachusetts Institute of Technology. (Park, 2004) Formation flight is a complex operation requiring the ability to adjust the flight patterns on the fly and correct for wind gusts, terrain, and differences in node equipment. All of which increases the amount of inner node communication. Since one of the problems with MANET communication is network congestion, we believe a first step towards formation flight can be made through improved inner node communication. We have investigated current communication routing protocols and developed an altered hybrid routing protocol in order to provide communication with less network congestion.

  14. Docket # EERE-2014-BT-STD-0051, and/or RIN 1904-AD40 Ex Parte Meeting 24th

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    February 2015 | Department of Energy 4-BT-STD-0051, and/or RIN 1904-AD40 Ex Parte Meeting 24th February 2015 Docket # EERE-2014-BT-STD-0051, and/or RIN 1904-AD40 Ex Parte Meeting 24th February 2015 Thanks for the invitation to discuss and explain comments to a new proposed gas compressor efficiency standard. DoE GasCompressors Efficiency HOERBIGER 9-1-2015 AdditionalResponse (83.97 KB) More Documents & Publications Natural Gas Infrastructure R&D and Methane Emissions Mitigation

  15. Microsoft Word - UEC-CC_020315_min_TEH.docx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    (Imperial College, London); Megan Robertson (U. Houston); Ray Unocic (ORNLCNMS); Rafael Verduzco (Rice U.) Past Chair, ex officio member - Vivek Prabhu (NIST) CNMS...

  16. Microsoft Word - UEC-CC_120314_min_TEH.docx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    (Imperial College, London); Megan Robertson (U. Houston); Ray Unocic (ORNLCNMS); Rafael Verduzco (Rice U.) Past Chair, ex officio member - Tony Hmelo (Vanderbilt U.) CNMS...

  17. Microsoft Word - UEC-CC_040715_min_TEH.docx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    (Imperial College, London); Megan Robertson (U. Houston); Ray Unocic (ORNLCNMS); Rafael Verduzco (Rice U.) Past Chair, ex officio member - Vivek Prabhu (NIST) CNMS...

  18. Microsoft Word - UEC-CC_010615_min.docx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    (Imperial College, London); Megan Robertson (U. Houston); Ray Unocic (ORNLCNMS); Rafael Verduzco (Rice U.) Past Chair, ex officio member - Vivek Prabhu (NIST) CNMS...

  19. Microsoft Word - UEC-CC_100215_min_TEH.docx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    (Imperial College, London); Megan Robertson (U. Houston); Ray Unocic (ORNLCNMS); Rafael Verduzco (Rice U.) Past Chair, ex officio member - Vivek Prabhu (NIST) CNMS...

  20. Microsoft Word - UEC-CC_060414_min_TEH.docx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    (Imperial College, London); Megan Robertson (U. Houston); Ray Unocic (ORNLCNMS); Rafael Verduzco (Rice U.) Past Chair, ex officio member - Tony Hmelo (Vanderbilt U.) CNMS...

  1. Microsoft Word - UEC-CC_030514_min.docx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    (Imperial College, London); Megan Robertson (U. Houston); Ray Unocic (ORNLCNMS); Rafael Verduzco (Rice U.) Past Chair, ex officio member - Tony Hmelo (Vanderbilt U.) CNMS...

  2. Microsoft Word - UEC-CC_050515_min_TEH.docx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    (Imperial College, London); Megan Robertson (U. Houston); Ray Unocic (ORNLCNMS); Rafael Verduzco (Rice U.) Past Chair, ex officio member - Vivek Prabhu (NIST) CNMS...

  3. Microsoft Word - UEC-CC_040214_min_TEH.docx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    (Imperial College, London); Megan Robertson (U. Houston); Ray Unocic (ORNLCNMS); Rafael Verduzco (Rice U.) Past Chair, ex officio member - Tony Hmelo (Vanderbilt U.) CNMS...

  4. Microsoft Word - UEC-CC_050714_min_TEH.docx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    (Imperial College, London); Megan Robertson (U. Houston); Ray Unocic (ORNLCNMS); Rafael Verduzco (Rice U.) Past Chair, ex officio member - Tony Hmelo (Vanderbilt U.) CNMS...

  5. Microsoft Word - UEC-CC_080415_min_TEH.docx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    (Imperial College, London); Megan Robertson (U. Houston); Ray Unocic (ORNLCNMS); Rafael Verduzco (Rice U.) Past Chair, ex officio member - Vivek Prabhu (NIST) CNMS...

  6. Microsoft Word - UEC-CC_030315_min_TEH.docx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    (Imperial College, London); Megan Robertson (U. Houston); Ray Unocic (ORNLCNMS); Rafael Verduzco (Rice U.) Past Chair, ex officio member - Vivek Prabhu (NIST) CNMS...

  7. Microsoft Word - UEC-CC_120415_min_teh.docx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    members: Vivek, Milan, Zheng, Martyn, Ray * 2015 User Satisfaction Survey (Eric with Rafael, Milan) o Draft of UEC summary for triennial review and recommendations was...

  8. Microsoft Word - UEC-CC_111714_min.docx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    (Imperial College, London); Megan Robertson (U. Houston); Ray Unocic (ORNLCNMS); Rafael Verduzco (Rice U.) Past Chair, ex officio member - Tony Hmelo (Vanderbilt U.) CNMS...

  9. zeolite-membranes-min | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Hydrogen Selective Exfoliated Zeolite Membranes Project No.: DE-FE0001322 The University of Minnesota is developing a technically and economically viable membrane for carbon dioxide (CO2) separation from typical water-gas-shift (WGS) mixture feeds. The goal of this project is to further develop recently developed membrane technology based on exfoliated zeolite coatings as components for carbon capture in integrated gasification combined cycle plants. These membranes have the potential to

  10. Microsoft Word - EM SSAB Fall 2010 Mtg Min.FINAL

    Office of Environmental Management (EM)

    Waste Processing Facility ECA - Energy Communities Alliance EIS - Environmental Impact ... Utilized Sites Remedial Action Program FY - Fiscal Year GAO - Government ...

  11. Property:Incentive/TechMin | Open Energy Information

    Open Energy Info (EERE)

    Standard (West Virginia) + At least 90% must come from eligible resources other than natural gas C City of Austin - Renewables Portfolio Standard (Texas) + 200 MW from solar by...

  12. MIN IMI IlI New Data Series

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Change, Petroleum Products Supplied, and Ending Stocks ... 40 3.1b Imports, Exports, and Net Imports ... 41 3.2 Crude Oil Supply and...

  13. SECTION J, APPENDIX Q - MIN STDS FOR CONTRACTORS' COI PLANS

    National Nuclear Security Administration (NNSA)

    Q, Page 1 SECTION J APPENDIX Q [Note: The Contractors' Conflict of Interest Plan shall be submitted to the Contracting Officer during the Transition Term prior to December 31, 2010.] MINIMUM STANDARDS FOR CONTRACTORS' CONFLICT OF INTEREST (COI) PLANS 12/1/10 A. Corporate Structure The COI Plan shall describe any parent relationship and list all affiliates, subsidiaries, and sister companies, etc. Generally, this need not exceed three corporate tiers, unless a relationship exists beyond three

  14. ARM Climate Research Facility Quarterly Value-Added Product Report January 1–March 30, 2011

    SciTech Connect (OSTI)

    Sivaraman, C

    2011-06-14

    The purpose of this report is to provide a concise status update for value-added products (VAP) implemented by the Atmospheric Radiation Measurement Climate Research Facility. The report is divided into the following sections: (1) new VAPs for which development has begun, (2) progress on existing VAPs, and (3) future VAPs that have been recently approved.

  15. Strings on AdS wormholes

    SciTech Connect (OSTI)

    Ali, Mir; Ruiz, Frenny; Saint-Victor, Carlos; Vazquez-Poritz, Justin F.

    2009-08-15

    We consider the behavior of open strings on anti-de Sitter wormholes in Gauss-Bonnet theory, which are the Gauss-Bonnet gravity duals of a pair of field theories. A string with both endpoints on the same side of the wormhole describes two charges within the same field theory, which exhibit Coulomb interaction for small separation. On the other hand, a string extending through the wormhole describes two charges which live in different field theories, and they exhibit a springlike confining potential. A transition occurs when there is a pair of charges present within each field theory: for small separation each pair of charges exhibits Coulomb interaction, while for large separation the charges in the different field theories pair up and exhibit confinement. Two steadily-moving charges in different field theories can occupy the same location provided that their speed is less than a critical speed, which also plays the role of a subluminal speed limit. However, for some wormhole backgrounds, charges moving at the critical speed cannot occupy the same location and energy is transferred from the leading charge to the lagging one. We also show that strings on anti-de Sitter wormholes in supergravity theories without higher-derivative curvature terms can exhibit these properties as well.

  16. ARM Climate Research Facility Quarterly Value-Added Product Report First Quarter: October 01-December 31, 2011

    SciTech Connect (OSTI)

    Sivaraman, C

    2012-02-28

    The purpose of this report is to provide a concise status update for value-added products (VAP) implemented by the Atmospheric Radiation Measurement (ARM) Climate Research Facility. The report is divided into the following sections: (1) new VAPs for which development has begun, (2) progress on existing VAPs, (3) future VAPs that have been recently approved, (4) other work that leads to a VAP, and (5) top requested VAPs from the archive.

  17. ARM Climate Research Facility Quarterly Value-Added Product Report Fourth Quarter: July 1–September 30, 2012

    SciTech Connect (OSTI)

    Sivaraman, C

    2012-11-13

    The purpose of this report is to provide a concise status update for value-added products (VAP) implemented by the Atmospheric Radiation Measurement (ARM) Climate Research Facility. The report is divided into the following sections: (1) new VAPs for which development has begun, (2) progress on existing VAPs, (3) future VAPs that have been recently approved, (4) other work that leads to a VAP, and (5) top requested VAPs from the archive.

  18. ARM Climate Research Facility Quarterly Value-Added Product Report Third Quarter: April 01–June 30, 2011

    SciTech Connect (OSTI)

    Sivaraman, C

    2011-08-18

    The purpose of this report is to provide a concise status update for value-added products (VAP) implemented by the Atmospheric Radiation Measurement Climate Research Facility. The report is divided into the following sections: (1) new VAPs for which development has begun, (2) progress on existing VAPs, (3) future VAPs that have been recently approved, (4) other work that leads to a VAP, and (5) top requested VAPs from the archive

  19. DOE/SC-ARM/TR-095 The Microbase Value-Added Product: A Baseline Retrieval of Cloud

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    5 The Microbase Value-Added Product: A Baseline Retrieval of Cloud Microphysical Properties M Dunn K Johnson M Jensen May 2011 DISCLAIMER This report was prepared as an account of work sponsored by the U.S. Government. Neither the United States nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or

  20. Top Value Added Chemicals from Biomass: Volume I--Results of Screening for Potential Candidates from Sugars and Synthesis Gas

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Top Value Added Chemicals from Biomass Volume I-Results of Screening for Potential Candidates from Sugars and Synthesis Gas Produced by the Staff at Pacific Northwest National Laboratory (PNNL) National Renewable Energy Laboratory (NREL) Office of Biomass Program (EERE) For the Office of the Biomass Program T. Werpy and G. Petersen, Editors U.S. Department of Energy Energy Efficiency and Renewable Energy Bringing you a prosperous future where energy is clean, abundant, reliable, and affordable

  1. Effect of unmodulated laser light on the nanostructure of a thin solid AD-1 azo dye film

    SciTech Connect (OSTI)

    Dubrovkin, A M; Ezhov, A A; Kozenkov, V M; Magnitskiy, Sergey A; Nagorskiy, Nikolay M; Panov, Vladimir I

    2010-06-23

    Exposure to light uniform in intensity and polarisation causes marked changes in the surface topography of a thin (320 nm) nanostructured AD-1 low molecular weight azo dye film. Linearly polarised incoherent light with a wavelength of 470 nm and intensity of 1 mW cm{sup -2} produces numerous teardrop-shaped hillocks of the order of 200 nm in radius over most of the film surface. (letters)

  2. Chapter 4: Advancing Clean Electric Power Technologies | Carbon Dioxide and Storage Value-Added Options Technology Assessment

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Storage Value-Added Options Carbon Dioxide Capture for Natural Gas and Industrial Applications Carbon Dioxide Capture Technologies Carbon Dioxide Storage Technologies Crosscutting Technologies in Carbon Dioxide Capture and Storage Fast-spectrum Reactors Geothermal Power High Temperature Reactors Hybrid Nuclear-Renewable Energy Systems Hydropower Light Water Reactors Marine and Hydrokinetic Power Nuclear Fuel Cycles Solar Power Stationary Fuel Cells Supercritical Carbon Dioxide Brayton Cycle

  3. Investigating the Influence of the Added Mass Effect to Marine Hydrokinetic Horizontal-Axis Turbines Using a General Dynamic Wake Wind Turbine Code: Preprint

    SciTech Connect (OSTI)

    Maniaci, D. C.; Li, Y.

    2012-04-01

    This paper describes a recent study to investigate the applicability of a horizontal-axis wind turbine (HAWT) structural dynamics and unsteady aerodynamics analysis program (FAST and AeroDyn respectively) to modeling the forces on marine hydrokinetic (MHK) turbines. It summarizes the added mass model that has been added to AeroDyn. The added mass model only includes flow acceleration perpendicular to the rotor disc, and ignores added mass forces caused by blade deflection. A model of the National Renewable Energy Laboratory's (NREL) Unsteady Aerodynamics Experiment (UAE) Phase VI wind turbine was analyzed using FAST and AeroDyn with sea water conditions and the new added mass model. The results of this analysis exhibited a 3.6% change in thrust for a rapid pitch case and a slight change in amplitude and phase of thrust for a case with 30 degrees of yaw.

  4. Investigating the Influence of the Added Mass Effect to Marine Hydrokinetic Horizontal-Axis Turbines Using a General Dynamic Wake Wind Turbine Code

    SciTech Connect (OSTI)

    Maniaci, D. C.; Li, Y.

    2011-10-01

    This paper describes a recent study to investigate the applicability of a horizontal-axis wind turbine (HAWT) structural dynamics and unsteady aerodynamics analysis program (FAST and AeroDyn respectively) to modeling the forces on marine hydrokinetic (MHK) turbines. This paper summarizes the added mass model that has been added to AeroDyn. The added mass model only includes flow acceleration perpendicular to the rotor disc, and ignores added mass forces caused by blade deflection. A model of the National Renewable Energy Laboratory's (NREL) Unsteady Aerodynamics Experiment (UAE) Phase VI wind turbine was analyzed using FAST and AeroDyn with sea water conditions and the new added mass model. The results of this analysis exhibited a 3.6% change in thrust for a rapid pitch case and a slight change in amplitude and phase of thrust for a case with 30{sup o} of yaw.

  5. ARM Climate Research Facility Quarterly Value-Added Product Report Fourth Quarter: July 01–September 30, 2011

    SciTech Connect (OSTI)

    Sivaraman, C

    2011-11-02

    The purpose of this report is to provide a concise status update for value-added products (VAP) implemented by the Atmospheric Radiation Measurement Climate Research Facility. The report is divided into the following sections: (1) new VAPs for which development has begun, (2) progress on existing VAPs, (3) future VAPs that have been recently approved, (4) other work that leads to a VAP, and (5) top requested VAPs from the archive. New information is highlighted in blue text. New information about processed data by the developer is highlighted in red text.

  6. On N = 2 compactifications of M-theory to AdS{sub 3} using geometric algebra techniques

    SciTech Connect (OSTI)

    Babalic, E. M.; Coman, I. A.; Condeescu, C.; Micu, A.; Lazaroiu, C. I.

    2013-11-13

    We investigate the most general warped compactification of eleven-dimensional supergravity on eight-dimensional manifolds to AdS{sub 3} spaces (in the presence of non-vanishing four-form flux) which preserves N = 2 supersymmetry in three dimensions. Without imposing any restrictions on the chirality of the internal part of the supersymmetry generators, we use geometric algebra techniques to study some implications of the supersymmetry constraints. In particular, we discuss the Lie bracket of certain vector fields constructed as pinor bilinears on the compactification manifold.

  7. DOE/SC-ARM/P-07-005.1 ARM Value-Added Product (VAP) Monthly Status Report

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    1 ARM Value-Added Product (VAP) Monthly Status Report ARM Translator Team J. Comstock C. Flynn M. Jensen C. Long D. Turner S. Xie March 13, 2007 Work supported by the U.S. Department of Energy, Office of Science, Office of Biological and Environmental Research DISCLAIMER This report was prepared as an account of work sponsored by the U.S. Government. Neither the United States nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal

  8. No-carrier-added (NCA) aryl (18E) fluorides via the nucleophilic aromatic substitution of electron rich aromatic rings

    DOE Patents [OSTI]

    Ding, Yu-Shin; Fowler, Joanna S.; Wolf, Alfred P.

    1993-01-01

    A method for synthesizing no-carrier-added (NCA) aryl [.sup.18 F] fluoride substituted aromatic aldehyde compositions bearing an electron donating group is described. The method of the present invention includes the step of reacting aromatic nitro aldehydes having a suitably protected hydroxyl substitutent on an electron rich ring. The reaction is The U.S. Government has rights in this invention pursuant to Contract Number DE-AC02-76CH00016, between the U.S. Department of Energy and Associated Universities Inc.

  9. No-carrier-added (NCA) aryl ([sup 18]F) fluorides via the nucleophilic aromatic substitution of electron rich aromatic rings

    DOE Patents [OSTI]

    Yushin Ding; Fowler, J.S.; Wolf, A.P.

    1993-10-19

    A method for synthesizing no-carrier-added (NCA) aryl [.sup.18 F] fluoride substituted aromatic aldehyde compositions bearing an electron donating group is described. The method of the present invention includes the step of reacting aromatic nitro aldehydes having a suitably protected hydroxyl substitutent on an electron rich ring. The reaction is The U.S. Government has rights in this invention pursuant to Contract Number DE-AC02-76CH00016, between the U.S. Department of Energy and Associated Universities Inc.

  10. Top Value-Added Chemicals from Biomass - Volume II„Results of Screening for Potential Candidates from Biorefinery Lignin

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Top Value-Added Chemicals from Biomass Volume II-Results of Screening for Potential Candidates from Biorefinery Lignin 1 JE Holladay 2 JJ Bozell 1 JF White 3 D Johnson 1 Pacific Northwest National Laboratory 2 University of Tennessee 3 National Renewable Energy Laboratory October 2007 Prepared for the U.S. Department of Energy under Contract DE-AC05-76RL01830 PNNL-16983 DISCLAIMER This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the

  11. Broad Temperature Pinning Study of 15 mol.% Zr-Added (Gd, Y)-Ba-Cu-O MOCVD Coated Conductors

    SciTech Connect (OSTI)

    Xu, AX; Khatri, N; Liu, YH; Majkic, G; Galstyan, E; Selvamanickam, V; Chen, YM; Lei, CH; Abraimov, D; Hu, XB; Jaroszynski, J; Larbalestier, D

    2015-06-01

    BaZrO3 (BZO) nanocolumns have long been shown to be very effective for raising the pinning force F-p of REBa2Cu3Ox (REBCO, where RE = rare earth) films at high temperatures and recently at low temperatures too. We have successfully incorporated a high density of BZO nanorods into metal organic chemical vapor deposited (MOCVD) REBCO coated conductors via Zr addition. We found that, compared to the 7.5% Zr-added coated conductor, dense BZO nanorod arrays in the 15% Zr-added conductor are effective over the whole temperature range from 77 K down to 4.2 K. We attribute the substantially enhanced J(c) at 30 K to the weak uncorrelated pinning as well as the strong correlated pinning. Meanwhile, by tripling the REBCO layer thickness to similar to 2.8 mu m, the engineering critical current density J(e) at 30 K exceeds J(e) of optimized Nb-Ti wires at 4.2 K.

  12. Microalgae as a feedstock for biofuel precursors and value-added products: Green fuels and golden opportunities

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Tang, Yuting; Rosenberg, Julian N.; Bohutskyi, Pavlo; Yu, Geng; Betenbaugh, Michael J.; Wang, Fei

    2015-11-16

    In this study, the prospects of biofuel production from microalgal carbohydrates and lipids coupled with greenhouse gas mitigation due to photosynthetic assimilation of CO2 have ushered in a renewed interest in algal feedstock. Furthermore, microalgae (including cyanobacteria) have become established as commercial sources of value-added biochemicals such as polyunsaturated fatty acids and carotenoid pigments used as antioxidants in nutritional supplements and cosmetics. This article presents a comprehensive synopsis of the metabolic basis for accumulating lipids as well as applicable methods of lipid and cellulose bioconversion and final applications of these natural or refined products from microalgal biomass. For lipids, one-stepmore » in situ transesterification offers a new and more accurate approach to quantify oil content. As a complement to microalgal oil fractions, the utilization of cellulosic biomass from microalgae to produce bioethanol by fermentation, biogas by anaerobic digestion, and bio-oil by hydrothermal liquefaction are discussed. Collectively, a compendium of information spanning green renewable fuels and value-added nutritional compounds is provided.« less

  13. Microalgae as a feedstock for biofuel precursors and value-added products: Green fuels and golden opportunities

    SciTech Connect (OSTI)

    Tang, Yuting; Rosenberg, Julian N.; Bohutskyi, Pavlo; Yu, Geng; Betenbaugh, Michael J.; Wang, Fei

    2015-11-16

    In this study, the prospects of biofuel production from microalgal carbohydrates and lipids coupled with greenhouse gas mitigation due to photosynthetic assimilation of CO2 have ushered in a renewed interest in algal feedstock. Furthermore, microalgae (including cyanobacteria) have become established as commercial sources of value-added biochemicals such as polyunsaturated fatty acids and carotenoid pigments used as antioxidants in nutritional supplements and cosmetics. This article presents a comprehensive synopsis of the metabolic basis for accumulating lipids as well as applicable methods of lipid and cellulose bioconversion and final applications of these natural or refined products from microalgal biomass. For lipids, one-step in situ transesterification offers a new and more accurate approach to quantify oil content. As a complement to microalgal oil fractions, the utilization of cellulosic biomass from microalgae to produce bioethanol by fermentation, biogas by anaerobic digestion, and bio-oil by hydrothermal liquefaction are discussed. Collectively, a compendium of information spanning green renewable fuels and value-added nutritional compounds is provided.

  14. The Y-12 Plant No Rad-Added Program for off-site shipment of nonradioactive hazardous waste

    SciTech Connect (OSTI)

    Cooper, K.H.; Mattie, B.K.; Williams, J.L.; Jacobs, D.G.; Roberts, K.A.

    1994-02-14

    On May 17, 1991, the US Department of Energy (DOE) issued a directive for DOE operations to cease off-site shipments of non-radioactive hazardous waste pending further clarification and approvals. A DOE Performance Objective for Certification of Non-Radioactive Hazardous Waste was issued in November 1991. In response to these directives, the Waste Management Division of Oak Ridge Y-12 Plant, with assistance from Roy F. Weston, Inc., has developed a No Rad-Added Program to provide small programmatic guidance and a set of procedures, approved by DOE, which will permit hazardous waste to be shipped from the Y-12 Plant to commercial treatment, storage, or disposal facilities after ensuring and certifying that hazardous waste has no radioactivity added as a result of DOE operations. There are serious legal and financial consequences of shipping waste containing radioactivity to an off-site facility not licensed to receive radioactive materials. Therefore, this program is designed with well-defined responsibilities and stringent documentation requirements.

  15. Data:5277c4c2-0b8b-4179-ad2c-59139826c6f2 | Open Energy Information

    Open Energy Info (EERE)

    ad2c-59139826c6f2 No revision has been approved for this page. It is currently under review by our subject matter experts. Jump to: navigation, search Loading... 1. Basic...

  16. Data:9f33a9f9-21ad-47b2-9b1f-4b3771f914ac | Open Energy Information

    Open Energy Info (EERE)

    ad-47b2-9b1f-4b3771f914ac No revision has been approved for this page. It is currently under review by our subject matter experts. Jump to: navigation, search Loading... 1. Basic...

  17. Preclinical pharmacology and toxicology study of Ad-hTERT-E1a-Apoptin, a novel dual cancer-specific oncolytic adenovirus

    SciTech Connect (OSTI)

    Qi, Yanxin; Guo, Huanhuan; Hu, Ningning; He, Dongyun; Zhang, Shi; Chu, Yunjie; Huang, Yubin; Li, Xiao; Sun, LiLi; Jin, Ningyi

    2014-10-15

    Clinical studies have demonstrated that conditionally replicating adenovirus is safe. We constructed an oncolytic adenovirus, Ad-hTERT-E1a-Apoptin, using a cancer-specific promoter (human telomerase reverse transcriptase promoter, hTERTp) and a cancer cell-selective apoptosis-inducing gene (Apoptin). Ad-hTERT-E1a-Apoptin was proven effective both in vitro and in vivo in our previous study. In this study, the preclinical safety profiles of Ad-hTERT-E1a-Apoptin in animal models were investigated. At doses of 5.0 × 10{sup 8}, 2.5 × 10{sup 9}, and 1.25 × 10{sup 10} viral particles (VP)/kg, Ad-hTERT-E1a-Apoptin had no adverse effects on mouse behavior, muscle cooperation, sedative effect, digestive system, and nervous systems, or on beagle cardiovascular and respiratory systems at 5.0 × 10{sup 8}, 2.5 × 10{sup 9}, and 1.25 × 10{sup 10} VP/kg doses. In acute toxicity tests in mice, the maximum tolerated dose > 5 × 10{sup 10} VP/kg. There was no inflammation or ulceration at the injection sites within two weeks. In repeat-dose toxicological studies, the no observable adverse effect levels of Ad-hTERT-E1a-Apoptin in rats (1.25 × 10{sup 10} VP/kg) and beagles (2.5 × 10{sup 9} VP/kg) were 62.5- and 12.5-fold of the proposed clinical dose, respectively. The anti-virus antibody was produced in animal sera. Bone marrow examination revealed no histopathological changes. Guinea pigs sensitized by three repeated intraperitoneal injections of 1.35 × 10{sup 10} VP/mL Ad-hTERT-E1a-Apoptin each and challenged by one intravenous injection of 1.67 × 10{sup 8} VP/kg Ad-hTERT-E1a-Apoptin did not exhibit any sign of systemic anaphylaxis. Our data from different animal models suggest that Ad-hTERT-E1a-Apoptin is a safe anti-tumor therapeutic agent. - Highlights: • We use the rodents and non-rodents animal models to evaluation Ad-hTERT-E1a-Apoptin. • Ad-hTERT-E1a-Apoptin is a safe anti-tumor therapeutic agent. • Demonstrate the safety and feasibility dose of injected Ad

  18. Methods for chemical recovery of non-carrier-added radioactive tin from irradiated intermetallic Ti-Sb targets

    DOE Patents [OSTI]

    Lapshina, Elena V.; Zhuikov, Boris L.; Srivastava, Suresh C.; Ermolaev, Stanislav V.; Togaeva, Natalia R.

    2012-01-17

    The invention provides a method of chemical recovery of no-carrier-added radioactive tin (NCA radiotin) from intermetallide TiSb irradiated with accelerated charged particles. An irradiated sample of TiSb can be dissolved in acidic solutions. Antimony can be removed from the solution by extraction with dibutyl ether. Titanium in the form of peroxide can be separated from tin using chromatography on strong anion-exchange resin. In another embodiment NCA radiotin can be separated from iodide solution containing titanium by extraction with benzene, toluene or chloroform. NCA radiotin can be finally purified from the remaining antimony and other impurities using chromatography on silica gel. NCA tin-117m can be obtained from this process. NCA tin-117m can be used for labeling organic compounds and biological objects to be applied in medicine for imaging and therapy of various diseases.

  19. Power production and ADS

    SciTech Connect (OSTI)

    Raja, Rajendran; /Fermilab

    2010-03-01

    We describe the power production process in Accelerator Driven Sub-critical systems employing Thorium-232 and Uranium-238 as fuel and examine the demands on the power of the accelerator required.

  20. Poster_AD.ppt

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    radiative transfer (RT) model with an unconventional propagation kernel, i.e., the term in ... Barker, H. W., B. A. Wielicki, and L. Parker, 1996: A parameterization for computing ...

  1. Del Genio-AD

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Simulated Vertical Structure of Tropical Convective Storms: Implications for GCM Parameterization A. D. Del Genio National Aeronautics and Space Administration Goddard Institute for Space Studies New York Introduction General circulation model (GCM) simulations of equilibrium greenhouse gas-induced climate change suggest that the single largest contributor to uncertainty in cloud feedback is due to changes in the areal extent and cloud water contents (CWC) of mesoscale convective systems (Yao

  2. Adding New Functionality

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    If an error dialog box appears, try logging in again. Contact Kelle Smith at kelle.smith@pnl.gov if you need assistance. Readiness Review Requests Pre-Deployment Readiness Review...

  3. 201008ad.cdr

    Office of Legacy Management (LM)

    Environmental Assessment for a Proposed Solar Energy Project near Durango The U.S. ... related to installing a photovoltaic solar electrical-generation system of ...

  4. 201004ad.cdr

    Office of Legacy Management (LM)

    Public to Attend Public Scoping Meeting on Proposed Solar Energy Project Near Durango U.S. ... related to installing a photovoltaic solar electrical generation system of up to 4.5 ...

  5. Canonical and kinetic forms of the electromagnetic momentum in an ad hoc quantization scheme for a dispersive dielectric

    SciTech Connect (OSTI)

    Garrison, J.C.; Chiao, R.Y.

    2004-11-01

    An ad hoc quantization scheme for the electromagnetic field in a weakly dispersive, transparent dielectric leads to the definition of canonical and kinetic forms for the momentum of the electromagnetic field in a dispersive medium. The canonical momentum is uniquely defined as the operator that generates spatial translations in a uniform medium, but the quantization scheme suggests two possible choices for the kinetic momentum operator, corresponding to the Abraham or the Minkowski momentum in classical electrodynamics. Another implication of this procedure is that a wave packet containing a single dressed photon travels at the group velocity through the medium. The physical significance of the canonical momentum has already been established by considerations of energy and momentum conservation in the atomic recoil due to spontaneous emission, the Cerenkov effect, the Doppler effect, and phase matching in nonlinear optical processes. In addition, the data of the Jones and Leslie radiation pressure experiment is consistent with the assignment of one ({Dirac_h}/2{pi})k unit of canonical momentum to each dressed photon. By contrast, experiments in which the dielectric is rigidly accelerated by unbalanced electromagnetic forces require the use of the Abraham momentum.

  6. Luminescence and electrical properties of solution-processed ZnO thin films by adding fluorides and annealing atmosphere

    SciTech Connect (OSTI)

    Choi, Sungho; Park, Byung-Yoon; Jung, Ha-Kyun

    2011-06-15

    Highlights: {yields} Systematic study of the fluorides doped solution-processed ZnO thin films via the luminescence and electrical behaviors. {yields} Defect-related visible emission bands are affected by annealing ambient and fluoride addition. {yields} Adding lithium fluoride followed by annealing in oxygen ambient leads to a controlled defect density with proper TFT performance. -- Abstract: To develop an efficient channel layer for thin film transistors (TFTs), understanding the defect-related luminescence and electrical property is crucial for solution-processed ZnO thin films. Film growth with the fluorides addition, especially using LiF, followed by the oxygen ambient post-annealing leads to decreased defect-related emission as well as enhanced switching property. The saturation mobility and current on/off ratio are 0.31 cm{sup 2} V{sup -1} s{sup -1} and 1.04 x 10{sup 3}. Consequently, we can visualize an optimized process condition and characterization method for solution-processed TFT based on the fluorine-doped ZnO film channel layer by considering the overall emission behavior.

  7. Extended Virtual Spring Mesh (EVSM): The Distributed Self-Organizing Mobile Ad Hoc Network for Area Exploration

    SciTech Connect (OSTI)

    Kurt Derr

    2011-12-01

    Mobile Ad hoc NETworks (MANETs) are distributed self-organizing networks that can change locations and configure themselves on the fly. This paper focuses on an algorithmic approach for the deployment of a MANET within an enclosed area, such as a building in a disaster scenario, which can provide a robust communication infrastructure for search and rescue operations. While a virtual spring mesh (VSM) algorithm provides scalable, self-organizing, and fault-tolerant capabilities required by aMANET, the VSM lacks the MANET's capabilities of deployment mechanisms for blanket coverage of an area and does not provide an obstacle avoidance mechanism. This paper presents a new technique, an extended VSM (EVSM) algorithm that provides the following novelties: (1) new control laws for exploration and expansion to provide blanket coverage, (2) virtual adaptive springs enabling the mesh to expand as necessary, (3) adapts to communications disturbances by varying the density and movement of mobile nodes, and (4) new metrics to assess the performance of the EVSM algorithm. Simulation results show that EVSM provides up to 16% more coverage and is 3.5 times faster than VSM in environments with eight obstacles.

  8. A simple technique to reduce evaporation of crystallization droplets by using plate lids with apertures for adding liquids

    SciTech Connect (OSTI)

    Zipper, Lauren E.; Aristide, Xavier; Bishop, Dylan P.; Joshi, Ishita; Kharzeev, Julia; Patel, Krishna B.; Santiago, Brianna M.; Joshi, Karan; Dorsinvil, Kahille; Sweet, Robert M.; Soares, Alexei S.

    2014-11-28

    A method is described for using plate lids to reduce evaporation in low-volume vapor-diffusion crystallization experiments. The plate lids contain apertures through which the protein and precipitants were added to different crystallization microplates (the reservoir was filled before fitting the lids). Plate lids were designed for each of these commonly used crystallization microplates. This system minimizes the dehydration of crystallization droplets containing just a few nanolitres of protein and precipitant, and results in more reproducible diffraction from the crystals. For each lid design, changes in the weight of the plates were used to deduce the rate of evaporation under different conditions of temperature, air movement, droplet size and precipitant. For comparison, the state of dehydration was also visually assessed throughout the experiment. Finally, X-ray diffraction methods were used to compare the diffraction of protein crystals that were conventionally prepared against those that were prepared on plates with plate lids. The measurements revealed that the plate lids reduced the rate of evaporation by 63–82%. Crystals grown in 5 nl drops that were set up with plate lids diffracted to higher resolution than similar crystals from drops that were set up without plate lids. Ultimately, the results demonstrate that plate lids can be instrumental for improving few-nanolitre crystallizations.

  9. A simple technique to reduce evaporation of crystallization droplets by using plate lids with apertures for adding liquids

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Zipper, Lauren E.; Aristide, Xavier; Bishop, Dylan P.; Joshi, Ishita; Kharzeev, Julia; Patel, Krishna B.; Santiago, Brianna M.; Joshi, Karan; Dorsinvil, Kahille; Sweet, Robert M.; et al

    2014-11-28

    A method is described for using plate lids to reduce evaporation in low-volume vapor-diffusion crystallization experiments. The plate lids contain apertures through which the protein and precipitants were added to different crystallization microplates (the reservoir was filled before fitting the lids). Plate lids were designed for each of these commonly used crystallization microplates. This system minimizes the dehydration of crystallization droplets containing just a few nanolitres of protein and precipitant, and results in more reproducible diffraction from the crystals. For each lid design, changes in the weight of the plates were used to deduce the rate of evaporation under differentmore » conditions of temperature, air movement, droplet size and precipitant. For comparison, the state of dehydration was also visually assessed throughout the experiment. Finally, X-ray diffraction methods were used to compare the diffraction of protein crystals that were conventionally prepared against those that were prepared on plates with plate lids. The measurements revealed that the plate lids reduced the rate of evaporation by 63–82%. Crystals grown in 5 nl drops that were set up with plate lids diffracted to higher resolution than similar crystals from drops that were set up without plate lids. Ultimately, the results demonstrate that plate lids can be instrumental for improving few-nanolitre crystallizations.« less

  10. A simple technique to reduce evaporation of crystallization droplets by using plate lids with apertures for adding liquids

    SciTech Connect (OSTI)

    Zipper, Lauren E.; Aristide, Xavier; Bishop, Dylan P.; Joshi, Ishita; Kharzeev, Julia; Patel, Krishna B.; Santiago, Brianna M.; Joshi, Karan; Dorsinvil, Kahille; Sweet, Robert M.; Soares, Alexei S.

    2014-11-28

    This article describes the use of evaporation control lids that are fitted to crystallization plates to improve the reproducibility of trials using as little as 5 nl. The plate lids contain apertures which are large enough for the transfer of protein containing droplets, but small enough to greatly reduce the rate of evaporation during the time needed to prepare the plate. A method is described for using plate lids to reduce evaporation in low-volume vapor-diffusion crystallization experiments. The plate lids contain apertures through which the protein and precipitants were added to different crystallization microplates (the reservoir was filled before fitting the lids). Plate lids were designed for each of these commonly used crystallization microplates. This system minimizes the dehydration of crystallization droplets containing just a few nanolitres of protein and precipitant, and results in more reproducible diffraction from the crystals. For each lid design, changes in the weight of the plates were used to deduce the rate of evaporation under different conditions of temperature, air movement, droplet size and precipitant. For comparison, the state of dehydration was also visually assessed throughout the experiment. Finally, X-ray diffraction methods were used to compare the diffraction of protein crystals that were conventionally prepared against those that were prepared on plates with plate lids. The measurements revealed that the plate lids reduced the rate of evaporation by 63–82%. Crystals grown in 5 nl drops that were set up with plate lids diffracted to higher resolution than similar crystals from drops that were set up without plate lids. The results demonstrate that plate lids can be instrumental for improving few-nanolitre crystallizations.

  11. Computational and experimental study of the effects of adding dimethyl ether and ethanol to nonpremixed ethylene/air flames

    SciTech Connect (OSTI)

    Bennett, Beth Anne V.; McEnally, Charles S.; Pfefferle, Lisa D.; Smooke, Mitchell D.; Colket, Meredith B.

    2009-06-15

    Two sets of axisymmetric laminar coflow flames, each consisting of ethylene/air nonpremixed flames with various amounts (up to 10%) of either dimethyl ether (CH{sub 3}-O-CH{sub 3}) or ethanol (CH{sub 3}-CH{sub 2}-OH) added to the fuel stream, have been examined both computationally and experimentally. Computationally, the local rectangular refinement method, which incorporates Newton's method, is used to solve the fully coupled nonlinear conservation equations on solution-adaptive grids for each flame in two spatial dimensions. The numerical model includes C6 chemical kinetic mechanisms with up to 59 species, detailed transport, and an optically thin radiation submodel. Experimentally, thermocouples are used to measure gas temperatures, and mass spectrometry is used to determine concentrations of over 35 species along the flame centerline. Computational results are examined throughout each flame, and validation of the model occurs through comparison with centerline measurements. Very good agreement is observed for temperature, major species, and several minor species. As the level of additive is increased, temperatures, some major species (CO{sub 2}, C{sub 2}H{sub 2}), flame lengths, and residence times are essentially unchanged. However, peak centerline concentrations of benzene (C{sub 6}H{sub 6}) increase, and this increase is largest when dimethyl ether is the additive. Computational and experimental results support the hypothesis that the dominant pathway to C{sub 6}H{sub 6} formation begins with the oxygenates decomposing into methyl radical (CH{sub 3}), which combines with C2 species to form propargyl (C{sub 3}H{sub 3}), which reacts with itself to form C{sub 6}H{sub 6}. (author)

  12. Draft Genome Sequences for Clostridium thermocellum Wild-Type Strain YS and Derived Cellulose Adhesion-Defective Mutant Strain AD2

    SciTech Connect (OSTI)

    Brown, Steven D; Lamed, Raphael; Morag, Ely; Borovok, Ilya; Shoham, Yuval; Klingeman, Dawn Marie; Johnson, Courtney M; Yang, Zamin; Land, Miriam L; Utturkar, Sagar M; Keller, Martin; Bayer, Edward A

    2012-01-01

    Clostridium thermocellum wild-type strain YS is an anaerobic, thermophilic, cellulolytic bacterium capable of directly converting cellulosic substrates into ethanol. Strain YS and a derived cellulose adhesion-defective mutant strain AD2 played pivotal roles in describing the original cellulosome concept. We present their draft genome sequences.

  13. A Security Solution for IEEE 802.11's Ad-hoc Mode:Password-Authentication and Group Diffie-Hellman Key Exchange

    SciTech Connect (OSTI)

    Emmanuel, Bresson; Olivier, Chevassut; David, Pointcheval

    2005-10-01

    The IEEE 802 standards ease the deployment of networkinginfrastructures and enable employers to accesscorporate networks whiletraveling. These standards provide two modes of communication calledinfrastructure and ad-hoc modes. A security solution for the IEEE802.11's infrastructure mode took several years to reach maturity andfirmware are still been upgraded, yet a solution for the ad-hoc modeneeds to be specified. The present paper is a first attempt in thisdirection. It leverages the latest developments in the area ofpassword-based authentication and (group) Diffie-Hellman key exchange todevelop a provably-secure key-exchange protocol for IEEE 802.11's ad-hocmode. The protocol allows users to securely join and leave the wirelessgroup at time, accommodates either a single-shared password orpairwise-shared passwords among the group members, or at least with acentral server; achieves security against dictionary attacks in theideal-hash model (i.e. random-oracles). This is, to the best of ourknowledge, the first such protocol to appear in the cryptographicliterature.

  14. A Principal Component Analysis Noise Filter Value-Added Procedure to Remove Uncorrelated Noise from Atmospheric Emitted Radiance Interferometer (AERI) Observations

    SciTech Connect (OSTI)

    C. Lo D. D. Turner R. O. Knuteson

    2006-01-31

    This technical report provide a short description of the application of the principle component analysis techniques to remove uncorrelated random noise from ground-based high spectral resolution infrared radiance observations collected by the atmospheric emitted radiance interferometers (AERIs) deployed by the Atmospheric Radiation Measurement (ARM) Program. A general overview of the technique, the input, and output datastreams of the newly generated value-added product, and the data quality checks used are provided. A more complete discussion of the theory and results is given in Turner et al. (2006).

  15. Ad Building demolition, recycling completed

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ARSEC Environmental, LLC was the general contractor for the demolition of the structure-four stories plus a basement-which opened in 1956 and closed in September 2008. Norris ...

  16. Adding Students and Multiplying Scientists

    Office of Energy Efficiency and Renewable Energy (EERE)

    This month, students across the country will begin competing in regional contests for the chance to attend the National Science Bowl in Washington, D.C.

  17. NREL's Min Zhang Keeps Her "Bugs" Happy, Leading to Biofuel Breakthrou...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... However, one of her professors was hosting an American academic-who was impressed with her credentials, and invited her to the United States as a postdoctoral student. "I hadn't ...

  18. Microsoft PowerPoint - 2006-04-lustre-future-40mins.ppt

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    network IO guarantees fast client & server side IO Routing enables multi-cluster, multi-network namespace Supports Multiple Network Protocols Lustre's failover...

  19. DOE/SC-ARM/TR-112 Changes to MFRSRCLDOD1MIN Datastream S McFarlane

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Line of Sight (MWRLOS) datastream. Although this was originally intended to be a straightforward update of the code, it became more complicated due to the following factors: * a...

  20. Combined state-adding and state-deleting approaches to type III multi-step rationally extended potentials: Applications to ladder operators and superintegrability

    SciTech Connect (OSTI)

    Marquette, Ian; Quesne, Christiane

    2014-11-15

    Type III multi-step rationally extended harmonic oscillator and radial harmonic oscillator potentials, characterized by a set of k integers m{sub 1}, m{sub 2}, ⋯, m{sub k}, such that m{sub 1} < m{sub 2} < ⋯ < m{sub k} with m{sub i} even (resp. odd) for i odd (resp. even), are considered. The state-adding and state-deleting approaches to these potentials in a supersymmetric quantum mechanical framework are combined to construct new ladder operators. The eigenstates of the Hamiltonians are shown to separate into m{sub k} + 1 infinite-dimensional unitary irreducible representations of the corresponding polynomial Heisenberg algebras. These ladder operators are then used to build a higher-order integral of motion for seven new infinite families of superintegrable two-dimensional systems separable in cartesian coordinates. The finite-dimensional unitary irreducible representations of the polynomial algebras of such systems are directly determined from the ladder operator action on the constituent one-dimensional Hamiltonian eigenstates and provide an algebraic derivation of the superintegrable systems whole spectrum including the level total degeneracies.

  1. YALINA facility a sub-critical Accelerator- Driven System (ADS) for nuclear energy research facility description and an overview of the research program (1997-2008).

    SciTech Connect (OSTI)

    Gohar, Y.; Smith, D. L.; Nuclear Engineering Division

    2010-04-28

    The YALINA facility is a zero-power, sub-critical assembly driven by a conventional neutron generator. It was conceived, constructed, and put into operation at the Radiation Physics and Chemistry Problems Institute of the National Academy of Sciences of Belarus located in Minsk-Sosny, Belarus. This facility was conceived for the purpose of investigating the static and dynamic neutronics properties of accelerator driven sub-critical systems, and to serve as a neutron source for investigating the properties of nuclear reactions, in particular transmutation reactions involving minor-actinide nuclei. This report provides a detailed description of this facility and documents the progress of research carried out there during a period of approximately a decade since the facility was conceived and built until the end of 2008. During its history of development and operation to date (1997-2008), the YALINA facility has hosted several foreign groups that worked with the resident staff as collaborators. The participation of Argonne National Laboratory in the YALINA research programs commenced in 2005. For obvious reasons, special emphasis is placed in this report on the work at YALINA facility that has involved Argonne's participation. Attention is given here to the experimental program at YALINA facility as well as to analytical investigations aimed at validating codes and computational procedures and at providing a better understanding of the physics and operational behavior of the YALINA facility in particular, and ADS systems in general, during the period 1997-2008.

  2. Adding flexibility to the particles-on-a-sphere model for large-amplitude motion: POSflex force field for protonated methane

    SciTech Connect (OSTI)

    Uhl, Felix; Walewski, ?ukasz; Forbert, Harald; Marx, Dominik

    2014-09-14

    The so-called particles-on-a-sphere (POS) model has been introduced a while ago in order to describe in simple terms large-amplitude motion of polyatomic hydrides, XH{sub n}. The POS model of protonated methane, CH{sub 5}{sup +}, has been shown to capture well the essence of the fluxional nature of this enigmatic floppy molecule. Here, we extend this model to the POSflex force field by adding flexibility to the CH bonds, which are constrained to a common fixed bond length in the original model. This makes the present model extremely efficient for computer simulation, including path integral molecular dynamics in order to assess the crucial quantum effects on nuclear motion at low temperatures. Moreover, the POSflex force field can be conveniently used to study microsolvation effects upon combining it with intermolecular pair potentials to account for solute-solvent interactions. Upon computing static properties as well as thermal and quantum fluctuation effects at ambient and low temperatures, respectively, it is shown that the POSflex model is very well suited to describe the structural properties of bare CH{sub 5}{sup +}, including hydrogen scrambling and thus fluxionality in the first place. The far- to mid-infrared spectrum up to the bending band is roughly described, whereas the model fails to account for the well-structured stretching band by construction.

  3. Logarithmic correction in the deformed AdS{sub 5} model to produce the heavy quark potential and QCD beta function

    SciTech Connect (OSTI)

    He Song; Huang Mei; Yan Qishu

    2011-02-15

    We study the holographic QCD model, which contains a quadratic term -{sigma}z{sup 2} and a logarithmic term -c{sub 0}log[(z{sub IR}-z)/z{sub IR}] with an explicit infrared cutoff z{sub IR} in the deformed AdS{sub 5} warp factor. We investigate the heavy-quark potential for three cases, i.e., with only a quadratic correction, with both quadratic and logarithmic corrections, and with only a logarithmic correction. We solve the dilaton field and dilation potential from the Einstein equation and investigate the corresponding beta function in the Guersoy-Kiritsis-Nitti framework. Our studies show that in the case with only a quadratic correction, a negative {sigma} or the Andreev-Zakharov model is favored to fit the heavy-quark potential and to produce the QCD beta function at 2-loop level; however, the dilaton potential is unbounded in the infrared regime. One interesting observation for the case of positive {sigma} is that the corresponding beta function exists in an infrared fixed point. In the case with only a logarithmic correction, the heavy-quark Cornell potential can be fitted very well, the corresponding beta function agrees with the QCD beta function at 2-loop level reasonably well, and the dilaton potential is bounded from below in the infrared. At the end, we propose a more compact model which has only a logarithmic correction in the deformed warp factor and has less free parameters.

  4. Perfect fluidity of a dissipative system: Analytical solution for the Boltzmann equation in AdS2 Ⓧ S2

    SciTech Connect (OSTI)

    Noronha, Jorge; Denicol, Gabriel S.

    2015-12-30

    In this paper we obtain an analytical solution of the relativistic Boltzmann equation under the relaxation time approximation that describes the out-of-equilibrium dynamics of a radially expanding massless gas. This solution is found by mapping this expanding system in flat spacetime to a static flow in the curved spacetime AdS2 Ⓧ S2. We further derive explicit analytic expressions for the momentum dependence of the single-particle distribution function as well as for the spatial dependence of its moments. We find that this dissipative system has the ability to flow as a perfect fluid even though its entropy density does not match the equilibrium form. The nonequilibrium contribution to the entropy density is shown to be due to higher-order scalar moments (which possess no hydrodynamical interpretation) of the Boltzmann equation that can remain out of equilibrium but do not couple to the energy-momentum tensor of the system. Furthermore, in this system the slowly moving hydrodynamic degrees of freedom can exhibit true perfect fluidity while being totally decoupled from the fast moving, nonhydrodynamical microscopic degrees of freedom that lead to entropy production.

  5. Evaluation of the deposition, translocation and pathological response of brake dust with and without added chrysotile in comparison to crocidolite asbestos following short-term inhalation: Interim results

    SciTech Connect (OSTI)

    Bernstein, David M.; Rogers, Rick; Sepulveda, Rosalina; Kunzendorf, Peter; Bellmann, Bernd; Ernst, Heinrich; Phillips, James I.

    2014-04-01

    Chrysotile has been frequently used in the past in manufacturing brakes and continues to be used in brakes in many countries. This study was designed to provide an understanding of the biokinetics and potential toxicology following inhalation of brake dust following short term exposure in rats. The deposition, translocation and pathological response of brake dust derived from brake pads manufactured with chrysotile were evaluated in comparison to the amphibole, crocidolite asbestos. Rats were exposed by inhalation 6 h/day for 5 days to either brake dust obtained by sanding of brake-drums manufactured with chrysotile, a mixture of chrysotile and the brake dust or crocidolite asbestos. No significant pathological response was observed at any time point in either the brake dust or chrysotile/brake dust exposure groups. The long chrysotile fibers (> 20 μm) cleared quickly with T{sub 1/2} estimated as 30 and 33 days, respectively in the brake dust and the chrysotile/brake dust exposure groups. In contrast, the long crocidolite fibers had a T{sub 1/2} > 1000 days and initiated a rapid inflammatory response in the lung following exposure resulting in a 5-fold increase in fibrotic response within 91 days. These results provide support that brake dust derived from chrysotile containing brake drums would not initiate a pathological response in the lung following short term inhalation. - Highlights: • We evaluated brake dust w/wo added chrysotile in comparison to crocidolite asbestos. • Persistence, translocation, pathological response in the lung and pleural cavity. • Chrysotile cleared rapidly from the lung while the crocidolite asbestos persisted. • No significant pathology observed at any time point in the brake-dust groups. • Crocidolite produced pathological response - Wagner 4 interstitial fibrosis by 32d.

  6. Adding Erlotinib to Chemoradiation Improves Overall Survival but Not Progression-Free Survival in Stage III Non-Small Cell Lung Cancer

    SciTech Connect (OSTI)

    Komaki, Ritsuko; Allen, Pamela K.; Wei, Xiong; Blumenschein, George R.; Tang, Ximing; Lee, J. Jack; Welsh, James W.; Wistuba, Ignacio I.; Liu, Diane D.; Hong, Waun Ki

    2015-06-01

    Purpose: To test, in a single-arm, prospective, phase 2 trial, whether adding the epidermal growth factor receptor (EGFR) tyrosine kinase inhibitor erlotinib to concurrent chemoradiotherapy for previously untreated, locally advanced, inoperable non-small cell lung cancer would improve survival and disease control without increasing toxicity. Methods and Materials: Forty-eight patients with previously untreated non-small cell lung cancer received intensity modulated radiation therapy (63 Gy/35 fractions) on Monday through Friday, with chemotherapy (paclitaxel 45 mg/m², carboplatin area under the curve [AUC] = 2) on Mondays, for 7 weeks. All patients also received the EGFR tyrosine kinase inhibitor erlotinib (150 mg orally 1/d) on Tuesday-Sunday for 7 weeks, followed by consolidation paclitaxel–carboplatin. The primary endpoint was time to progression; secondary endpoints were overall survival (OS), toxicity, response, and disease control and whether any endpoint differed by EGFR mutation status. Results: Of 46 patients evaluable for response, 40 were former or never-smokers, and 41 were evaluable for EGFR mutations (37 wild-type [WT] and 4 mutated [all adenocarcinoma]). Median time to progression was 14.0 months and did not differ by EGFR status. Toxicity was acceptable (no grade 5, 1 grade 4, 11 grade 3). Twelve patients (26%) had complete responses (10 WT, 2 mutated), 27 (59%) partial (21 WT, 2 mutated, 4 unknown), and 7 (15%) none (6 WT, 2 mutated, 1 unknown) (P=.610). At 37.0 months' follow-up (range, 3.6-76.5 months) for all patients, median OS time was 36.5 months, and 1-, 2-, and 5-year OS rates were 82.6%, 67.4%, and 35.9%, respectively; none differed by mutation status. Twelve patients had no progression, and 34 had local and/or distant failure. Eleven of 27 distant failures were in the brain (7 WT, 3 mutated, 1 unknown). Conclusions: Toxicity and OS were promising, but time to progression did not meet expectations. The prevalence of distant

  7. IMPACT OF SB4 TANK 40 DECANT AND ARP/MCU ADDITIONS WITH/WITHOUT ADDED CAUSTIC ON DWPF CPC PERFORMANCE

    SciTech Connect (OSTI)

    Koopman, D; David Best, D; Frances Williams, F

    2008-04-18

    cases. Relatively insignificant rheological changes were noted other than the previously established thinning from higher acid additions. SRAT and SME processing at 130% acid stoichiometry with and without ARP/MCU additions were very similar. MCU nitric acid content, however, shifted the normal acid addition prior to boiling toward more formic acid and less nitric acid than without MCU. SRNL found no technical issues processing the proposed Tank 40 decant (with or without added NaOH) from the standpoint of the impact on the DWPF SRAT and SME cycles subject to the inherent uncertainties in modeling the ARP noble metal concentrations. The noble metals in the ARP were set to the same weight percents in the total solids that they were measured at in the SB4 waste, which was considered likely to be bounding on the actual noble metal content of the ARP transfer to DWPF. Assumptions for formate loss and nitrite to nitrate conversion can be left at the current levels.

  8. Stanford Geothermal Workshop

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Added

  9. "Economic","per Employee","of Value Added","of Shipments" "Characteristic(a)","(million Btu)","(thousand Btu)","(thousand Btu)"

    U.S. Energy Information Administration (EIA) Indexed Site

    2 Relative Standard Errors for Table 6.2;" " Unit: Percents." ,,,"Consumption" " ",,"Consumption","per Dollar" " ","Consumption","per Dollar","of Value" "Economic","per Employee","of Value Added","of Shipments" "Characteristic(a)","(million Btu)","(thousand Btu)","(thousand Btu)" ,"Total United States" "Value

  10. "Economic","per Employee","of Value Added","of Shipments" "Characteristic(a)","(million Btu)","(thousand Btu)","(thousand Btu)"

    U.S. Energy Information Administration (EIA) Indexed Site

    2 Relative Standard Errors for Table 6.2;" " Unit: Percents." ,,,"Consumption" ,,"Consumption","per Dollar" ,"Consumption","per Dollar","of Value" "Economic","per Employee","of Value Added","of Shipments" "Characteristic(a)","(million Btu)","(thousand Btu)","(thousand Btu)" ,"Total United States" "Value of Shipments and

  11. Momentum transport in the vicinity of q{sub min} in reverse shear tokamaks due to ion temperature gradient turbulence

    SciTech Connect (OSTI)

    Singh, Rameswar; Laboratoire de Physique des Plasmas, Ecole Polytechnique route de Saclay, 91128 Palaiseau Cedex ; Singh, R; WCI Center for Fusion Theory, National Fusion Research Institute, Daejeon 305-333 ; Jhang, Hogun; Diamond, P. H.; Center for Momentum Transport and Flow Organization, University of California, San Diego, California 92093; Center for Astrophysics and Space Sciences, University of California San Diego, 9500 Gilman Dr., La Jolla, California 92093-0424

    2014-01-15

    We present an analytic study of momentum transport of tokamak plasmas in the vicinity of minimum safety factor (q) position in reversed magnetic shear configuration. Slab ion temperature gradient modes with an equilibrium flow profile are considered in this study. Quasi-linear calculations of momentum flux clearly show the novel effects of q-curvature on the generation of intrinsic rotation and mean poloidal flow without invoking reflectional symmetry breaking of parallel wavenumber (k{sub ?}). This q-curvature effect originates from the inherent asymmetry in k{sub ?} populations with respect to a rational surface due to the quadratic proportionality of k{sub ?} when q-curvature is taken into account. Discussions are made of possible implications of q-curvature induced plasma flows on internal transport barrier formation in reversed shear tokamaks.

  12. Frequency adding lasers and optical amplifiers

    SciTech Connect (OSTI)

    Goldstone, J.A.

    1989-02-21

    A method is described for creating population inversions for use in stimulated emission devices which beam combine, beam cleanup, or frequency up-convert electromagnetic radiation, comprising: (a) providing a multilevel quantum medium; (b) providing pump beams for near resonantly enhanced multiphoton pumping of the multilevel quantum medium, the multilevel quantum medium having atoms or molecules with three or more energy levels whose transition energies are near resonant with the pump beams, the near resonantly enhanced multiphoton pumping being defined such that each pump beam photon energy is close to but not equal to a transition energy between two energy levels of the multilevel quantum medium, thus producing small single photon detunings between the pump beams and the energy levels, these small single photon detunings thereby defining interacting energy levels of the multilevel quantum medium; and directing the pump beams into the multilevel quantum medium having decay rates into an intermediate energy level greater than decay rates out of the intermediate energy level, the intermediate energy level lying between the lowest and highest of the interacting energy levels.

  13. GS-AD-0010-001.PDF

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    10-001.doc Forklift Date: 2001/01/17 This directive concerns the use of the CAMD forklift by individuals who have not received training by CAMD (for example a vendor) but who need to operate the CAMD forklift to ensure completion their work (contract) at CAMD. This option is available only to outside contractors. Reference to this exception is detailed in GS-PO-0009- 001.doc under section 8, entitled Exemptions to the rule. All individuals described above, must sign a release waiver. A sample

  14. ARM - Value-Added Products (VAP)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    VAPs, which have been updated to the ARM quality control standards, produce both c1 and s1 output files (see ARM file naming conventions). The s1 files are summary files that...

  15. Adding International Rates | OpenEI Community

    Open Energy Info (EERE)

    is this possible ? Submitted by Simonberry on 17 March, 2014 - 06:24 1 answer Points: 0 Hello, I provide user support for SAM and was asked by the OpenEI team to post a response to...

  16. Ad Lucem Workshop: Modeling Breakout Session

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    "In the very general and abstract use of the term to date, there has been little necessity to understand what a 'market' might actually consist of or what a 'transformation' might look like.... When viewed through the lens of scientific theory and empirical research, we find that markets are complex human systems of exchange, deeply embedded in a variety of socio-political and cultural systems, all supported by long-lived technical infrastructure (which has been shaped historically by a

  17. Doppler Lidar Wind Value-Added Product

    SciTech Connect (OSTI)

    Newsom, R. K.; Sivaraman, C.; Shippert, T. R.; Riihimaki, L. D.

    2015-07-01

    Wind speed and direction, together with pressure, temperature, and relative humidity, are the most fundamental atmospheric state parameters. Accurate measurement of these parameters is crucial for numerical weather prediction. Vertically resolved wind measurements in the atmospheric boundary layer are particularly important for modeling pollutant and aerosol transport. Raw data from a scanning coherent Doppler lidar system can be processed to generate accurate height-resolved measurements of wind speed and direction in the atmospheric boundary layer.

  18. GS-AD-0009-001.PDF

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    09-001.doc Crane Date: 20010130 This directive concerns the use of the CAMD crane by individuals who have not received training by CAMD (for example a vendor) but who need to ...

  19. ARM - Value-Added Products (VAP)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ASI, AWR, ENA, FKB, GRW, HFE, MAO, NIM, NSA, PGH, PVC, PYE, SGP, SMT, TWP 2005.03.23 ... Properties AWR, FKB, GRW, HFE, MAO, NIM, NSA, PGH, PVC, PYE, SGP 1996.07.02 2016.09.30 ...

  20. ADDING REALISM TO NUCLEAR MATERIAL DISSOLVING ANALYSIS

    SciTech Connect (OSTI)

    Williamson, B.

    2011-08-15

    Two new criticality modeling approaches have greatly increased the efficiency of dissolver operations in H-Canyon. The first new approach takes credit for the linear, physical distribution of the mass throughout the entire length of the fuel assembly. This distribution of mass is referred to as the linear density. Crediting the linear density of the fuel bundles results in using lower fissile concentrations, which allows higher masses to be charged to the dissolver. Also, this approach takes credit for the fact that only part of the fissile mass is wetted at a time. There are multiple assemblies stacked on top of each other in a bundle. On average, only 50-75% of the mass (the bottom two or three assemblies) is wetted at a time. This means that only 50-75% (depending on operating level) of the mass is moderated and is contributing to the reactivity of the system. The second new approach takes credit for the progression of the dissolving process. Previously, dissolving analysis looked at a snapshot in time where the same fissile material existed both in the wells and in the bulk solution at the same time. The second new approach models multiple consecutive phases that simulate the fissile material moving from a high concentration in the wells to a low concentration in the bulk solution. This approach is more realistic and allows higher fissile masses to be charged to the dissolver.

  1. Microsoft Word - Rapp-AD.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Hampton, Virginia P. Minnis, W. L. Smith, Jr., L. Nguyen, and M. P. Haeffelin NASA Langley ... This proceedings. Haeffelin, M., S. Kato, A. M. Smith, C. K. Rutledge, T. P. Charlock, and ...

  2. Value-Added Stock Loan Participation Program

    Broader source: Energy.gov [DOE]

    Like Minnesota's Agricultural Improvement Loan Program, this is a "participation loan" program, where loans are made by individual financial institutions working with the Rural Finance Authority ...

  3. Conversion efficiency improvement of inverted CH{sub 3}NH{sub 3}PbI{sub 3} perovskite solar cells with room temperature sputtered ZnO by adding the C{sub 60} interlayer

    SciTech Connect (OSTI)

    Lai, Wei-Chih Chen, Peter; Lin, Kun-Wei; Wang, Yuan-Ting; Guo, Tzung-Fang

    2015-12-21

    We have demonstrated the performance of inverted CH{sub 3}NH{sub 3}PbI{sub 3} perovskite-based solar cells (SCs) with a room temperature (RT) sputtered ZnO electron transport layer by adding fullerene (C{sub 60}) interlayer. ZnO exhibits a better matched conduction band level with perovskite and Al work function and around energy offset of 2.2 eV between highest occupied molecular orbital level of CH{sub 3}NH{sub 3}PbI{sub 3} perovskite and valance band level of ZnO. However, the CH{sub 3}NH{sub 3}PbI{sub 3} perovskite layer will be damaged during direct RT sputtering deposition of ZnO. Therefore, the C{sub 60} interlayer having matched conduction band level with ZnO and CH{sub 3}NH{sub 3}PbI{sub 3} perovskite added between the CH{sub 3}NH{sub 3}PbI{sub 3} perovskite and RT sputtered ZnO layers for protection prevents sputtering damages on the CH{sub 3}NH{sub 3}PbI{sub 3} perovskite layer. The short-circuit current density (J{sub SC}, 19.41 mA/cm{sup 2}) and open circuit voltage (V{sub OC}, 0.91 V) of the SCs with glass/ITO/poly(3,4-ethylenedioxythiophene):poly(styrene-sulfonate) (PEDOT:PSS)/perovskite/C{sub 60}/RT sputtered ZnO/Al structure is higher than the J{sub SC} (16.23 mA/cm{sup 2}) and V{sub OC} (0.90 V) of the reference SC with glass/ITO/PEDOT:PSS/perovskite/C{sub 60}/bathocuproine (BCP)/Al structure. Although the SCs with the former structure has a lower fill factor (FF%) than the SCs with the latter structure, its conversion efficiency η% (10.93%) is higher than that (10.6%) of the latter.

  4. Conductance control at the LaAlO{sub 3}/SrTiO{sub 3}-interface by a multiferroic BiFeO{sub 3} ad-layer

    SciTech Connect (OSTI)

    Mix, Christian; Finizio, Simone; Kläui, Mathias; Jakob, Gerhard

    2014-06-30

    Multilayered BiFeO{sub 3} (BFO)/LaAlO{sub 3} (LAO) thin film samples were fabricated on SrTiO{sub 3} (STO) substrates by pulsed laser deposition. In this work, the ferroelectric polarization of a multiferroic BFO ad-layer on top of the quasi-two-dimensional electron gas (2DEG) at the LAO/STO interface is used to manipulate the conductivity of the quasi-2DEG. By microstructuring the conductive area of the LAO/STO-interface, a four-point geometry for the measurement of the resistivity was achieved. Piezo force microscopy allows for imaging and poling the spontaneous ferroelectric polarization of the multiferroic layer. The resistance changes showed a linear dependence on the area scanned and a hysteretic behavior with respect to the voltages applied in the scanning process. This is evidence for the ferroelectric polarization of the multiferroic causing the resistance changes. Coupling the antiferromagnetic BFO layer to another ferromagnetic layer could enable a magnetic field control of the conductance of the quasi-2DEG at the LAO/STO interface.

  5. Evaluation of the fate and pathological response in the lung and pleura of brake dust alone and in combination with added chrysotile compared to crocidolite asbestos following short-term inhalation exposure

    SciTech Connect (OSTI)

    Bernstein, D.M.; Rogers, R.A.; Sepulveda, R.; Kunzendorf, P.; Bellmann, B.; Ernst, H.; Creutzenberg, O.; Phillips, J.I.

    2015-02-15

    This study was designed to provide an understanding of the biokinetics and potential toxicology in the lung and pleura following inhalation of brake dust following short term exposure in rats. The deposition, translocation and pathological response of brake-dust derived from brake pads manufactured with chrysotile were evaluated in comparison to the amphibole, crocidolite asbestos. Rats were exposed by inhalation 6 h/day for 5 days to either brake-dust obtained by sanding of brake-drums manufactured with chrysotile, a mixture of chrysotile and the brake-dust or crocidolite asbestos. The chrysotile fibers were relatively biosoluble whereas the crocidolite asbestos fibers persisted through the life-time of the animal. This was reflected in the lung and the pleura where no significant pathological response was observed at any time point in the brake dust or chrysotile/brake dust exposure groups through 365 days post exposure. In contrast, crocidolite asbestos produced a rapid inflammatory response in the lung parenchyma and the pleura, inducing a significant increase in fibrotic response in both of these compartments. Crocidolite fibers were observed embedded in the diaphragm with activated mesothelial cells immediately after cessation of exposure. While no chrysotile fibers were found in the mediastinal lymph nodes, crocidolite fibers of up to 35 μm were observed. These results provide support that brake-dust derived from chrysotile containing brake drums would not initiate a pathological response in the lung or the pleural cavity following short term inhalation. - Highlights: • Evaluated brake dust w/wo added chrysotile in comparison to crocidolite asbestos. • Persistence, translocation, pathological response in the lung and pleural cavity. • Chrysotile cleared rapidly from the lung while the crocidolite asbestos persisted. • No significant pathology in lung or pleural cavity observed at any time point in the brake-dust groups. • Crocidolite quickly

  6. AdS Black Disk Model for Small-x Deep Inelastic Scattering

    SciTech Connect (OSTI)

    Cornalba, Lorenzo; Costa, Miguel S.; Penedones, Joao

    2010-08-13

    Using the approximate conformal invariance of QCD at high energies we consider a simple anti-de Sitter black disk model to describe saturation in deep inelastic scattering. Deep inside saturation the structure functions have the same power law scaling, F{sub T}{approx}F{sub L}{approx}x{sup -{omega}}, where {omega} is related to the expansion rate of the black disk with energy. Furthermore, the ratio F{sub L}/F{sub T} is given by the universal value (1+{omega}/3+{omega}), independently of the target. For {gamma}*-{gamma}* scattering at high energies we obtain explicit expressions and ratios for the total cross sections of transverse and longitudinal photons in terms of the single parameter {omega}.

  7. Model Catalysis of Ammonia Synthesis ad Iron-Water Interfaces - ASum Frequency Generation Vibrational Spectroscopic Study of Solid-GasInterfaces and Anion Photoelectron Spectroscopic Study of Selected Anionclusters

    SciTech Connect (OSTI)

    Ferguson, Michael James

    2005-12-15

    The ammonia synthesis reaction has been studied using single crystal model catalysis combined with sum frequency generation (SFG) vibrational spectroscopy. The adsorption of gases N{sub 2}, H{sub 2}, O{sub 2} and NH{sub 3} that play a role in ammonia synthesis have been studied on the Fe(111) crystal surface by sum frequency generation vibrational spectroscopy using an integrated Ultra-High Vacuum (UHV)/high-pressure system. SFG spectra are presented for the dissociation intermediates, NH{sub 2} ({approx}3325 cm{sup -1}) and NH ({approx}3235 cm{sup -1}) under high pressure of ammonia or equilibrium concentrations of reactants and products on Fe(111) surfaces. Special attention was paid to understand how potassium promotion of the iron catalyst affects the intermediates of ammonia synthesis. An Fe(111) surface promoted with 0.2 monolayers of potassium red shifts the vibrational frequencies of the reactive surface intermediates, NH and NH{sub 2}, providing evidence for weakened the nitrogen-hydrogen bonds relative to clean Fe(111). Spectral features of these surface intermediates persisted to higher temperatures for promoted iron surfaces than for clean Fe(111) surfaces implying that nitrogen-iron bonds are stronger for the promoted surface. The ratio of the NH to NH{sub 2} signal changed for promoted surfaces in the presence of equilibrium concentrations of reactants and products. The order of adding oxygen and potassium to promoted surfaces does not alter the spectra indicating that ammonia induces surface reconstruction of the catalyst to produce the same surface morphology. When oxygen is co-adsorbed with nitrogen, hydrogen, ammonia or potassium on Fe(111), a relative phase shift of the spectra occurs as compared to the presence of adsorbates on clean iron surfaces. Water adsorption on iron was also probed using SFG vibrational spectroscopy. For both H{sub 2}O and D{sub 2}O, the only spectral feature was in the range of the free OH or free OD. From the absence of

  8. Cloud Optical Properties from the Multi-Filter Shadowband Radiometer...

    Office of Scientific and Technical Information (OSTI)

    The Min and Harrison algorithm has been incorporated into an ARM Value-Added Product (VAP) ... As specified by Min and Harrison (1996), the wavelength at 415 nm was chosen due to the ...

  9. "NAICS",,"per Employee","of Value Added","of Shipments" "Code(a)","Economic Characteristic(b)","(million Btu)","(thousand Btu)","(thousand Btu)"

    U.S. Energy Information Administration (EIA) Indexed Site

    3 Relative Standard Errors for Table 6.3;" " Unit: Percents." " "," ",,,"Consumption" " "," ",,"Consumption","per Dollar" " "," ","Consumption","per Dollar","of Value" "NAICS",,"per Employee","of Value Added","of Shipments" "Code(a)","Economic Characteristic(b)","(million Btu)","(thousand

  10. "NAICS",,"per Employee","of Value Added","of Shipments" "Code(a)","Economic Characteristic(b)","(million Btu)","(thousand Btu)","(thousand Btu)"

    U.S. Energy Information Administration (EIA) Indexed Site

    4 Relative Standard Errors for Table 6.4;" " Unit: Percents." " "," ",,,"Consumption" " "," ",,"Consumption","per Dollar" " "," ","Consumption","per Dollar","of Value" "NAICS",,"per Employee","of Value Added","of Shipments" "Code(a)","Economic Characteristic(b)","(million Btu)","(thousand

  11. "NAICS",,"per Employee","of Value Added","of Shipments" "Code(a)","Economic Characteristic(b)","(million Btu)","(thousand Btu)","(thousand Btu)"

    U.S. Energy Information Administration (EIA) Indexed Site

    3 Relative Standard Errors for Table 6.3;" " Unit: Percents." ,,,,"Consumption" ,,,"Consumption","per Dollar" ,,"Consumption","per Dollar","of Value" "NAICS",,"per Employee","of Value Added","of Shipments" "Code(a)","Economic Characteristic(b)","(million Btu)","(thousand Btu)","(thousand Btu)" ,,"Total United States" "

  12. "NAICS",,"per Employee","of Value Added","of Shipments" "Code(a)","Economic Characteristic(b)","(million Btu)","(thousand Btu)","(thousand Btu)"

    U.S. Energy Information Administration (EIA) Indexed Site

    4 Relative Standard Errors for Table 6.4;" " Unit: Percents." ,,,,"Consumption" ,,,"Consumption","per Dollar" ,,"Consumption","per Dollar","of Value" "NAICS",,"per Employee","of Value Added","of Shipments" "Code(a)","Economic Characteristic(b)","(million Btu)","(thousand Btu)","(thousand Btu)" ,,"Total United States" "

  13. ARSCL Cloud Statistics - A Value-Added Product

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    data from active remote sensors to produce an objective determination of cloud location, radar reflectivity, vertical velocity, and Doppler spectral width. Information about the...

  14. Adding a MOAB Geometry Interface to SHARP Structural Mechanics

    SciTech Connect (OSTI)

    Ferencz, R M; Hodge, N E

    2012-05-28

    The authors briefly summarize the development of, and test experience with, an initial data interface between the structural mechanics code Diablo and the SHARP reactor simulation system data hub MOAB. That interface has been exercised both to write MOAB databases from Diablo, and then also to use such a database to read in part of a simulation definition for a subsequent Diablo execution. All enhancements are integrated into the central Diablo source repository. The SHARP software system for advanced simulation of nuclear reactors and power plant systems is sponsored by DOE's Nuclear Energy Advanced Modeling and Simulation (NEAMS) program. SHARP has been architected as a federation of single-physics simulation tools to permit flexibility in programming langugages and leveraging of past and on-going investments. Solution of multi-physics problems will be coordinated by, and data passed through, a central 'hub'. SHARP's hub implementation is utilizing MOAB: a Mesh-Oriented datABase. This same data hub approach is also intended to enable multi-resolution simulations, e.g, lower-dimension plant-scale simulations can be informed by high-fidelity 3D models of particular critical components.

  15. New methods for identifying value added by a regional climate...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Brian Grabowski at media@anl.gov or (630) 252-1232. Connect Find an Argonne expert by subject. Follow Argonne on Twitter, Facebook, Google+ and LinkedIn. For inquiries on...

  16. USDA Webinar: Value-Added Producer Grants for Tribal Entities

    Broader source: Energy.gov [DOE]

    Tuesday, January 149:00 – 10:30 AM Alaska Standard Time10:00 – 11:30 AM Pacific Standard Time11:00 AM-12:30 PM Mountain Standard Time12:00 PM – 1:30 PM Central Standard Time1:00 PM-2:30 PM Eastern...

  17. ARM Evaluation Product : Droplet Number Concentration Value-Added...

    Office of Scientific and Technical Information (OSTI)

    They show that the magnitude of the aerosol-cloud interactions (ACI) varies with a range of factors, including the relative value of the cloud liquid water path (LWP), the aerosol ...

  18. Report of ad hoc OTEC cold water pipe committee

    SciTech Connect (OSTI)

    Barr, R.; Giannotti, J.; Deuchler, W.; Scotti, R.; Stadter, J.; Walsh, J. P.; Weiss, R.

    1980-02-01

    Now that the design work on the pilot plant is scheduled to start in the near future, DOE has considered it essential that an overall look be taken at the cold water pipe design process. The VSE Corporation, in its role as a support contractor to DOE, was tasked to organize a small study group to answer the question, Where do we stand on the verification of the computer models of the cold water pipe response by experimental measurements. The committee has studied all the available results of the cold water pipe development program. This report summarizes those results. The development and present capabilities of the computer programs used to calculate the response of a cold water pipe attached to a platform under known at-sea conditions are discussed. The various cold water pipe designs that have been done using the computer programs are summarized. The experiments that have been conducted up to the present time to measure the response of cold water pipes at-sea and in experimental tanks are described. The results of these experiments are presented. The experimental results are compared with the predictions made with the analytical computer programs. Conclusions drawn as a result of this analysis are presented and some recommendations are made. (WHK)

  19. Issues in Value-Added Products from Biomass

    SciTech Connect (OSTI)

    Elliott, Douglas C.

    2001-11-01

    While biomass conversion to energy products has been the primary focus of most development efforts over the past 30 years, process development for chemical products is an area of increasing effort more recently. Although the fuels market is likely to allow the largest impact for renewable resources in the world economy, chemical products can also be more than just niche market applications. However, the specific chemical processing required for refined chemical products requires improved chemical handling methods for separations and purifications, as well as improved catalyst systems. Development of these unit operations has lagged behind the process research focused on the finished products. This paper will describe some of the critical processing issues that need to be addressed to allow biomass feedstocks to make a real impact in the chemicals market. The paper will also describe some of the process research which has been performed or is now underway in our laboratory and others'. Areas to be discussed include biomass component separation, catalyst development for aqueous processing, and trace component effects in catalytic processing of biomass feedstocks.

  20. Microsoft Word - FDI A&D 2007.doc

    U.S. Energy Information Administration (EIA) Indexed Site

    XXI (Bermuda) - oil & gas assets oil & gas production Pogo Producing 410 Repsol YPF (Spain) Repsol Energy North America oil & gas assets (28 percent of Genghis Khan) oil & gas...

  1. ARM KAZR-ARSCL Value Added Product (Dataset) | Data Explorer

    Office of Scientific and Technical Information (OSTI)

    Country of Publication: United States Availability: ORNL Language: English Subject: 54 Environmental Sciences ARM, KAZR, ARSCL,KAZR-ARSCL Dataset File size NAView Dataset ...

  2. No-carrier-added (18F)-N-methylspiroperidol

    DOE Patents [OSTI]

    Shiue, Chyng-Yann; Fowler, Joanna S.; Wolf, Alfred P.

    1993-07-06

    There is disclosed a radioligand labeled with a positron emitting radionuclide suitable for dynamic study in living humans with positron emission transaxial tomography. [.sup.18 F]-N-methylspiroperidol, exhibiting extremely high affinity for the dopamine receptors, provides enhanced uptake and retention in the brain concomitant with reduced radiation burden. These characteristics all combine to provide [.sup.18 F]-N-methylspiroperidol as a radioligand superior to known radioligands for mapping dopamine receptors in normal and disease states in the living brain. Additionally, a new synthetic procedure for this material is disclosed.

  3. No-carrier-added (18F)-N-methylspiroperidol

    DOE Patents [OSTI]

    Shiue, Chyng-Yann; Fowler, Joanna S.; Wolf, Alfred P.

    1993-01-01

    There is disclosed a radioligand labeled with a positron emitting radionuclide suitable for dynamic study in living humans with positron emission transaxial tomography. [.sup.18 F]-N-methylspiroperidol, exhibiting extremely high affinity for the dopamine receptors, provides enhanced uptake and retention in the brain concomitant with reduced radiation burden. These characteristics all combine to provide [.sup.18 F]-N-methylspiroperidol as a radioligand superior to known radioligands for mapping dopamine receptors in normal and disease states in the living brain. Additionally, a new synthetic procedure for this material is disclosed.

  4. Section 180(c) Ad Hoc Working Group | Department of Energy

    Office of Environmental Management (EM)

    Continuing Appropriations Act | Department of Energy 29 of the Consolidated Security, Disaster Assistance, and Continuing Appropriations Act Section 129 of the Consolidated Security, Disaster Assistance, and Continuing Appropriations Act Section 129 of the Consolidated Security, Disaster Assistance, and Continuing Appropriations Act (480.1 KB) More Documents & Publications Energy Policy Act of 2005 NATIONAL DEFENSE AUTHORIZATION ACT FOR FISCAL YEAR 2000 Energy Policy Act of 2005

    512

  5. Security Communications Protocol Ad Hoc Working Group | Department of

    Office of Environmental Management (EM)

    Renewable Energy (EERE) | Department of Energy Securing America's Clean Energy Future (Fact Sheet), Energy Efficiency & Renewable Energy (EERE) Securing America's Clean Energy Future (Fact Sheet), Energy Efficiency & Renewable Energy (EERE) This two-page fact sheet provides an overview of the activities and programs in DOE's Office of Energy Efficiency and Renewable Energy. 51111.pdf (656.28 KB) More Documents & Publications Office of the Biomass Program Educational Opportunities

  6. Aerosol Optical Depth Value-Added Product Report

    SciTech Connect (OSTI)

    Koontz, A; Hodges, G; Barnard, J; Flynn, C; Michalsky, J

    2013-03-17

    This document describes the process applied to retrieve aerosol optical depth (AOD) from multifilter rotating shadowband radiometers (MFRSR) and normal incidence multifilter radiometers (NIMFR) operated at the ARM Climate Research Facility’s ground-based facilities.

  7. WIPP Exhibit: Message to 12,000 A.D.

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    place is not a place of honor. No highly esteemed deed is commemorated here. Nothing valued is here. This place is a message and part of a system of messages. Pay attention to it! Sending this message was important to us. We considered ourselves to be a powerful culture. Excerpts from Expert Judgment on Markers to Deter Inadvertent Human Intrusion into the Waste Isolation Pilot Plant, Sandia National Laboratories report SAND92-1382 / UC-721, p. F-49 Team A: * Dieter G. Ast (Cornell University) *

  8. Organic Aerosol Component (OACOMP) Value-Added Product Report...

    Office of Scientific and Technical Information (OSTI)

    The key outputs of OACOMP are the concentration time series and the mass spectra of OA factors that are associated with distinct sources, formation and evolution processes, and ...

  9. AD&D insurance offers three coverage options

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Only: covers only you Employee + Child(ren) or Modified Family: covers you and your children* Employee + Family: covers you, your spousedomestic partner and your children* *The...

  10. Expert Meeting Report: Key Innovations for Adding Energy Efficiency...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    or implied, or assumes any legal liability or responsibility ... orders@ntis.fedworld.gov online ordering: http:... upgrades and what training is necessary to use the ...

  11. Droplet Number Concentration Value-Added Product (Technical Report...

    Office of Scientific and Technical Information (OSTI)

    LWP is from the adiabatic case. quality control (QC) flags (qcdropnumberconc), an ... Sponsoring Org: USDOE Office of Science (SC), Biological and Environmental Research (BER) ...

  12. Best Estimate Radiation Flux Value-Added Procedure: Algorithm...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    the U.S. Department of Energy, Office of Energy Research, Office of Health and ......... 1 3. Configuration Files......

  13. Adding Data Management Services to Parallel File Systems

    SciTech Connect (OSTI)

    Brandt, Scott

    2015-03-04

    The objective of this project, called DAMASC for “Data Management in Scientific Computing”, is to coalesce data management with parallel file system management to present a declarative interface to scientists for managing, querying, and analyzing extremely large data sets efficiently and predictably. Managing extremely large data sets is a key challenge of exascale computing. The overhead, energy, and cost of moving massive volumes of data demand designs where computation is close to storage. In current architectures, compute/analysis clusters access data in a physically separate parallel file system and largely leave it scientist to reduce data movement. Over the past decades the high-end computing community has adopted middleware with multiple layers of abstractions and specialized file formats such as NetCDF-4 and HDF5. These abstractions provide a limited set of high-level data processing functions, but have inherent functionality and performance limitations: middleware that provides access to the highly structured contents of scientific data files stored in the (unstructured) file systems can only optimize to the extent that file system interfaces permit; the highly structured formats of these files often impedes native file system performance optimizations. We are developing Damasc, an enhanced high-performance file system with native rich data management services. Damasc will enable efficient queries and updates over files stored in their native byte-stream format while retaining the inherent performance of file system data storage via declarative queries and updates over views of underlying files. Damasc has four key benefits for the development of data-intensive scientific code: (1) applications can use important data-management services, such as declarative queries, views, and provenance tracking, that are currently available only within database systems; (2) the use of these services becomes easier, as they are provided within a familiar file-based ecosystem; (3) common optimizations, e.g., indexing and caching, are readily supported across several file formats, avoiding effort duplication; and (4) performance improves significantly, as data processing is integrated more tightly with data storage. Our key contributions are: SciHadoop which explores changes to MapReduce assumption by taking advantage of semantics of structured data while preserving MapReduce’s failure and resource management; DataMods which extends common abstractions of parallel file systems so they become programmable such that they can be extended to natively support a variety of data models and can be hooked into emerging distributed runtimes such as Stanford’s Legion; and Miso which combines Hadoop and relational data warehousing to minimize time to insight, taking into account the overhead of ingesting data into data warehousing.

  14. NREL: Energy Systems Integration - NREL Assesses Costs of Adding...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    to Existing Power Systems September 29, 2015 Much effort has been made to assess the costs associated with integrating variable generation (VG) such as wind and solar into an...

  15. ARM Climate Research Facility Quarterly Value-Added Product Report...

    Office of Scientific and Technical Information (OSTI)

    (VAP) implemented by the Atmospheric Radiation Measurement Climate Research Facility. ... approved, (4) other work that leads to a VAP, and (5) top requested VAPs from the archive. ...

  16. Station-based Surface Data Value-Added Product

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... It is a twin data product of the ARMBE 2-Dimensional gridded (ARMBE2DGRID) data set. Unlike the ARMBE2DGRID data set, ARMBESTNS data are reported at the original site locations and ...

  17. Adding Fault Tolerance to NPB Benchmarks Using ULFM

    SciTech Connect (OSTI)

    Parchman, Zachary W; Vallee, Geoffroy R; Naughton III, Thomas J; Engelmann, Christian; Bernholdt, David E; Scott, Stephen L

    2016-01-01

    In the world of high-performance computing, fault tolerance and application resilience are becoming some of the primary concerns because of increasing hardware failures and memory corruptions. While the research community has been investigating various options, from system-level solutions to application-level solutions, standards such as the Message Passing Interface (MPI) are also starting to include such capabilities. The current proposal for MPI fault tolerant is centered around the User-Level Failure Mitigation (ULFM) concept, which provides means for fault detection and recovery of the MPI layer. This approach does not address application-level recovery, which is currently left to application developers. In this work, we present a mod- ification of some of the benchmarks of the NAS parallel benchmark (NPB) to include support of the ULFM capabilities as well as application-level strategies and mechanisms for application-level failure recovery. As such, we present: (i) an application-level library to checkpoint and restore data, (ii) extensions of NPB benchmarks for fault tolerance based on different strategies, (iii) a fault injection tool, and (iv) some preliminary results that show the impact of such fault tolerant strategies on the application execution.

  18. Doppler Lidar Vertical Velocity Statistics Value-Added Product...

    Office of Scientific and Technical Information (OSTI)

    Citation Details In-Document Search Title: Doppler Lidar Vertical Velocity Statistics ... Facility operates coherent Doppler lidar systems at several sites around the globe. ...

  19. Ion beam collimating grid to reduce added defects

    DOE Patents [OSTI]

    Lindquist, Walter B. (Oakland, CA); Kearney, Patrick A. (Livermore, CA)

    2003-01-01

    A collimating grid for an ion source located after the exit grid. The collimating grid collimates the ion beamlets and disallows beam spread and limits the beam divergence during transients and steady state operation. The additional exit or collimating grid prevents beam divergence during turn-on and turn-off and prevents ions from hitting the periphery of the target where there is re-deposited material or from missing the target and hitting the wall of the vessel where there is deposited material, thereby preventing defects from being deposited on a substrate to be coated. Thus, the addition of a collimating grid to an ion source ensures that the ion beam will hit and be confined to a specific target area.

  20. Addendum Added to Innovative Demonstration of Geothermal Energy Production FOA

    Broader source: Energy.gov [DOE]

    The U.S. Department of Energy’s (DOE) Geothermal Technologies Program (GTP) has released a Funding Opportunity Announcement (FOA) that seeks innovative demonstration of energy production from non-conventional geothermal resources.

  1. Cloud Condensation Nuclei Profile Value-Added Product (Technical...

    Office of Scientific and Technical Information (OSTI)

    Authors: McFarlane, S ; Sivaraman, C ; Ghan, S Publication Date: 2012-10-08 OSTI Identifier: 1052588 Report Number(s): DOESC-ARMTR-103 PNNL-21877 DOE Contract Number: ...

  2. Aerosol Optical Depth Value-Added Product Report (Technical Report...

    Office of Scientific and Technical Information (OSTI)

    Authors: Koontz, A ; Hodges, G ; Barnard, J ; Flynn, C ; Michalsky, J Publication Date: 2013-03-17 OSTI Identifier: 1092419 Report Number(s): DOESC-ARMTR-129 PNNL-22260 DOE ...

  3. Raman Lidar Profiles-Temperature (RLPROFTEMP) Value-Added Product...

    Office of Scientific and Technical Information (OSTI)

    Authors: Newsom, RK ; Sivaraman, C ; McFarlane, SA Publication Date: 2012-10-31 OSTI Identifier: 1053989 Report Number(s): DOESC-ARMTR-120 PNNL-21965 DOE Contract Number: ...

  4. Interpolated Sounding Value-Added Product (Technical Report)...

    Office of Scientific and Technical Information (OSTI)

    OSTI Identifier: 1226794 Report Number(s): DOESC-ARMTR-124 DOE Contract Number: ... Full Text preview image File size NAView Full Text View Full Text DOI: 10.21721226794

  5. PEAC{trademark} value-added project. Final report

    SciTech Connect (OSTI)

    Sheesley, D.

    1997-09-01

    Chemical spill emergencies are exacerbated by a lack of information at the scene with which to quickly assess the situation and determine the appropriate protective action. WRI has concluded that the most successful emergency tools (models) for predicting toxic cloud behavior are those that use field test data as part of their development. After analyzing more than 100 real-world chemical spill accidents and field test releases, WRI has also concluded that information from dense gas/toxic models must be communicated in a fast, simple way to emergency responders or it will not be used. In an effort to address this technology gap, WRI has developed PEAC{trademark} (Palmtop Emergency Action for Chemicals). PEAC is an innovative tool that combines hardware, software, data bases developed by WRI and other organizations, and a unique approach to modeling protective action distances tested with actual field data. PEAC brings modeling data and other reference sources together in a single piece of portable equipment to help emergency responders evaluate a chemical spill incident and quickly determine protective action distances.

  6. Method for adding nodes to a quantum key distribution system

    DOE Patents [OSTI]

    Grice, Warren P

    2015-02-24

    An improved quantum key distribution (QKD) system and method are provided. The system and method introduce new clients at intermediate points along a quantum channel, where any two clients can establish a secret key without the need for a secret meeting between the clients. The new clients perform operations on photons as they pass through nodes in the quantum channel, and participate in a non-secret protocol that is amended to include the new clients. The system and method significantly increase the number of clients that can be supported by a conventional QKD system, with only a modest increase in cost. The system and method are compatible with a variety of QKD schemes, including polarization, time-bin, continuous variable and entanglement QKD.

  7. No-carrier-added [.sup.18 F]-N-fluoroalkylspiroperidols

    DOE Patents [OSTI]

    Shiue, Chyng-Yann; Wolf, Alfred P.; Bai, Lan-Qin; Teng, Ren-Tui

    1989-01-01

    There is disclosed radioligands labeled with the position emitting radionuclide [.sup.18 F] suitable for dynamic study in living humans with position emission transaxial tomography. These new [.sup.18 F]-N-fluoroalkylspiroperidols, wherein the alkyl group contains from 2-6 carbon atoms, exhibit extremely high affinity for the dopamine receptors and provide enhanced uptake and retention in the brain concomitant with reduced radiation burden. These characteristics all combine to make these new radioligands useful for mapping dopamine receptors in normal and disease states in the living brain. Additionally, a new synthetic procedure for these radioligands as well as a new procedure for preparing the radiolabeled alkyl halide alkylating reagents are also disclosed.

  8. Catalyst added to Claus furnace reduces sulfur losses

    SciTech Connect (OSTI)

    Luinstra, E.A.; d'Haene, P.E. (Shell Canada Ltd., Toronto, ON (Canada). Oakville Research Centre)

    1989-07-01

    Several substances effectively catalyze the reduction of carbon disulfide in Claus gas streams at Claus reaction furnace conditions (about 1,000{sup 0}C). Some conversion of carbonyl sulfide also occurs. Carbon disulfide and carbonyl sulfide as well-known problem compounds that reduce sulfur recovery efficiency in many sulfur recovery plants. Installation of a suitable catalytic material in the reaction furnace promises significant improvement of Claus plant efficiency, and prolonged life of the catalytic converters. Almost every Claus sulfur recovery plant makes some carbon disulfide (CS/sub 2/) and carbonyl sulfide (COS) in the reaction furnace, and in many of these plants, these compounds constitute a significant problem. CS/sub 2/ and COS often comprise more than 50% of sulfur losses in the tail gas. This article reexamines the issue of CS/sub 2/ and COS in the Claus plant. The relative importance of these two troublesome components is explored with data accumulated from Shell Canada Claus plants. The authors discuss which factors tend to produce these components. Then a method for reducing CS/sub 2/ and COS virtually at the source will be introduced.

  9. How Energy Efficiency is Adding Jobs in St. Paul, Minnesota

    Broader source: Energy.gov [DOE]

    Saint Paul, Minnesota is using an energy efficiency grant to provide commercial retrofits that will allow a local produce distribution company to dramatically reduce its energy costs and add dozens...

  10. Interpolated Sounding and Gridded Sounding Value-Added Products

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... or sondewnpn.b1 vwind vwind T Toto and M Jensen, March 2016, DOESC-ARM-TR-183 4 Note that GRIDDEDSONE is not provided by ARM as an available data stream; however, the data ...

  11. ARM Evaluation Product : Droplet Number Concentration Value-Added Product

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Riihimaki, Laura

    Cloud droplet number concentration is an important factor in understanding aerosol-cloud interactions. As aerosol concentration increases, it is expected that droplet number concentration, Nd, will increase and droplet size decrease, for a given liquid water path (Twomey 1977), which will greatly affect cloud albedo as smaller droplets reflect more shortwave radiation. However, the magnitude and variability of these processes under different environmental conditions is still uncertain. McComiskey et al. (2009) have implemented a method, based on Boers and Mitchell (1994), for calculating Nd from ground-based remote sensing measurements of optical depth and liquid water path. They show that the magnitude of the aerosol-cloud interactions (ACI) varies with a range of factors, including the relative value of the cloud liquid water path (LWP), the aerosol size distribution, and the cloud updraft velocity. Estimates of Nd under a range of cloud types and conditions and at a variety of sites are needed to further quantify the impacts of aerosol cloud interactions.

  12. Task 4.9 -- Value-added products from syngas

    SciTech Connect (OSTI)

    Olson, E.S.; Sharma, R.K.

    1997-02-01

    The work on advanced fuel forms in 1996 focused on the synthesis of higher alcohols from mixtures of hydrogen and carbon dioxide (syngas) from coal gasification. The conversion of coal gasification products to commercially valuable alcohols will provide an important new market for current and future gasification plants. Initial work in this project utilized a novel molybdenum sulfide catalyst previously shown to be active for hydrodesulfurization reactions of coal liquids. The support for the active metal sulfide is a layered mixed oxide (hydrotalcite) capable of interaction with the metal sites for catalysis of carbon monoxide reductions. These catalysts have a high surface area, are highly porous, and have basic and acidic functionality. A pressurized fixed-bed flow-through reactor was constructed, and the MoS{sub 2} catalysts were tested with syngas under a variety of conditions. Unfortunately, the catalysts, even with higher molybdenum loading and addition of promoters, failed to give alcohol products. A batch reactor test of the catalyst was also conducted, but did not produce alcohol products. Group 8 metals have been used previously in catalysts for syngas reactions. Ruthenium and rhodium catalysts were prepared by impregnation of a hydrotalcite support. Tests with these catalysts in flow-through reactors also did not produce the desired alcohol products. The formation of higher alcohols from smaller ones, such as methanol and ethanol, could be commercially important if high selectivity could be achieved. The methanol and ethanol would be derived from syngas and fermentation, respectively. Based on previous work in other laboratories, it was hypothesized that the hydrotalcite supported MoS{sub 2} or Ru or Rh catalysts could catalyze the formation of butyl alcohols. Although the desired 1-butanol was obtained in batch reactions with the promoted Ru catalyst, the reaction was not as selective as desired. Product suitable for a lower-vapor-pressure gasoline oxygenate additive was obtained, but it may not be economical to market such products in competition with methyl tertiary-butyl-ether. Flow-through catalytic bed reactions were not successful.

  13. Value-Added Attributes of the QA Requirements

    Broader source: Energy.gov [DOE]

    1. Senior Management Ownership Senior management must take full ownership of the quality assurance program. These managers should establish policies and objectives focused on achieving the organization's mission while improving the quality of the organization's products and services. They must create an environment that promotes quality and the improvement of quality throughout the entire organization.

  14. ARM Evaluation Product : Droplet Number Concentration Value-Added Product

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Riihimaki, Laura

    2014-05-15

    Cloud droplet number concentration is an important factor in understanding aerosol-cloud interactions. As aerosol concentration increases, it is expected that droplet number concentration, Nd, will increase and droplet size decrease, for a given liquid water path (Twomey 1977), which will greatly affect cloud albedo as smaller droplets reflect more shortwave radiation. However, the magnitude and variability of these processes under different environmental conditions is still uncertain. McComiskey et al. (2009) have implemented a method, based on Boers and Mitchell (1994), for calculating Nd from ground-based remote sensing measurements of optical depth and liquid water path. They show that the magnitude of the aerosol-cloud interactions (ACI) varies with a range of factors, including the relative value of the cloud liquid water path (LWP), the aerosol size distribution, and the cloud updraft velocity. Estimates of Nd under a range of cloud types and conditions and at a variety of sites are needed to further quantify the impacts of aerosol cloud interactions.

  15. AdS/CFT and Large-N Volume Independence

    SciTech Connect (OSTI)

    Poppitz, Erich; Unsal, Mithat; /SLAC /Stanford U., Phys. Dept.

    2010-08-26

    We study the Eguchi-Kawai reduction in the strong-coupling domain of gauge theories via the gravity dual of N=4 super-Yang-Mills on R{sup 3} x S{sup 1}. We show that D-branes geometrize volume independence in the center-symmetric vacuum and give supergravity predictions for the range of validity of reduced large-N models at strong coupling.

  16. Value Added Energy Information Systems VAEIS | Open Energy Information

    Open Energy Info (EERE)

    Solar, Wind energy Product: Provides turn-key monitoring systems for the performance of solar, wind, fuel cell and other distributed generation installations. Coordinates:...

  17. ARM Value-Added Cloud Products: Description and Status

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    This VAP combines the data from the millimeter cloud radar (MMCR), micropulse lidar (MPL), laser ceilometer, microwave radiometer (MWR), and surface measurements. It produces a ...

  18. How Energy Efficiency is Adding Jobs in St. Paul, Minnesota

    ScienceCinema (OSTI)

    Hannigan, Jim; Coleman, Chris; Oliver, LeAnn; Jambois, Louis

    2013-05-29

    Saint Paul, Minnesota is using an energy efficiency grant to provide commercial retrofits that will allow a local produce distribution company to dramatically reduce its energy costs and add dozens of new workers.

  19. Atmospheric Radiation Measurement (ARM) Value-Added Data Products...

    Office of Scientific and Technical Information (OSTI)

    of the quality of the input data. taken from http:www.arm.govdatavapsall.php One of the ARM data centers, the External Data Center or XDC at Brookhaven National Laboratory, ...

  20. Organic Aerosol Component (OACOMP) Value-Added Product (Technical...

    Office of Scientific and Technical Information (OSTI)

    But atmospheric OA is poorly characterized and its life cycle insufficiently represented in models. As a result, current models are unable to simulate OA concentrations and ...

  1. Ad Lucem: Modeling of Market Transformation Pathways Workshop...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    energy technology market dynamics. 2. Modeling solar energy technology evolution ... market, as well as institutional behavioral influences in the context of U.S. society. ...

  2. New Gapminder Visualizations Added! | OpenEI Community

    Open Energy Info (EERE)

    You must login in order to post into this group. Latest blog post comments Mike o spectacular dataset Posted: 9 Aug 2015 - 14:46 by: Mike o Calum Residential idf Files Posted:...

  3. Hydropower Upgrades to Yield Added Generation at Average Costs...

    Office of Environmental Management (EM)

    ... Air pollution would be reduced in a non-attainment air basin as the debris has been previously burned for removal. Following negotiation of final funding amounts, projects are ...

  4. Black holes in a box: Toward the numerical evolution of black holes in AdS space-times

    SciTech Connect (OSTI)

    Witek, Helvi; Nerozzi, Andrea; Cardoso, Vitor; Herdeiro, Carlos; Sperhake, Ulrich; Zilhao, Miguel

    2010-11-15

    The evolution of black holes in ''confining boxes'' is interesting for a number of reasons, particularly because it mimics the global structure of anti-de Sitter geometries. These are nonglobally hyperbolic space-times and the Cauchy problem may only be well defined if the initial data are supplemented by boundary conditions at the timelike conformal boundary. Here, we explore the active role that boundary conditions play in the evolution of a bulk black hole system, by imprisoning a black hole binary in a box with mirrorlike boundary conditions. We are able to follow the post-merger dynamics for up to two reflections off the boundary of the gravitational radiation produced in the merger. We estimate that about 15% of the radiation energy is absorbed by the black hole per interaction, whereas transfer of angular momentum from the radiation to the black hole is observed only in the first interaction. We discuss the possible role of superradiant scattering for this result. Unlike the studies with outgoing boundary conditions, both of the Newman-Penrose scalars {Psi}{sub 4} and {Psi}{sub 0} are nontrivial in our setup, and we show that the numerical data verifies the expected relations between them.

  5. Data:1fff44fd-9121-43ad-ad10-1fe40e158c93 | Open Energy Information

    Open Energy Info (EERE)

    fe40e158c93 No revision has been approved for this page. It is currently under review by our subject matter experts. Jump to: navigation, search Loading... 1. Basic Information 2....

  6. Adding a Visualization Feature to Web Search Engines: Its Time

    SciTech Connect (OSTI)

    Wong, Pak C.

    2008-11-11

    Since the first world wide web (WWW) search engine quietly entered our lives in 1994, the information need behind web searching has rapidly grown into a multi-billion dollar business that dominates the internet landscape, drives e-commerce traffic, propels global economy, and affects the lives of the whole human race. Todays search engines are faster, smarter, and more powerful than those released just a few years ago. With the vast investment pouring into research and development by leading web technology providers and the intense emotion behind corporate slogans such as win the web or take back the web, I cant help but ask why are we still using the very same text-only interface that was used 13 years ago to browse our search engine results pages (SERPs)? Why has the SERP interface technology lagged so far behind in the web evolution when the corresponding search technology has advanced so rapidly? In this article I explore some current SERP interface issues, suggest a simple but practical visual-based interface design approach, and argue why a visual approach can be a strong candidate for tomorrows SERP interface.

  7. Have You Added Value to Your Home with Energy Saving Upgrades?

    Broader source: Energy.gov [DOE]

    Have you done any energy-efficient remodeling and seen your home increase in either value or appeal to potential buyers?

  8. Th and U fuel photofission study by NTD for AD-MSR subcritical assembly

    SciTech Connect (OSTI)

    Sajo-Bohus, Laszlo; Greaves, Eduardo D.; Barros, Haydn; Pino, Felix; Barrera, Maria T.; Farina, Fulvio; Davila, Jesus

    2015-07-23

    During the last decade a considerable effort has been devoted for developing energy generating systems based on advanced nuclear technology within the design concepts of GEN-IV. Thorium base fuel systems such as accelerator driven nuclear reactors are one of the often mentioned attractive and affordable options. Several radiotherapy linear accelerators are on the market and due to their reliability, they could be employed as drivers for subcritical liquid fuel assemblies. Bremsstrahlung photons with energies above 5.5MeV, induce (γ,n) and (e,e’n) reactions in the W-target. Resulting gamma radiation and photo or fission neutrons may be absorbed in target materials such as thorium and uranium isotopes to induce sustained fission or nuclear transmutation in waste radioactive materials. Relevant photo driven and photo-fission reaction cross sections are important for actinides {sup 232}Th, {sup 238}U and {sup 237}Np in the radiotherapy machines energy range of 10-20 MV. In this study we employ passive nuclear track detectors (NTD) to determine fission rates and neutron production rates with the aim to establish the feasibility for gamma and photo-neutron driven subcritical assemblies. To cope with these objectives a 20 MV radiotherapy machine has been employed with a mixed fuel target. Results will support further development for a subcritical assembly employing a thorium containing liquid fuel. It is expected that acquired technological knowledge will contribute to the Venezuelan nuclear energy program.

  9. The PUREM SCR System with AdBlue | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Presentation given at DEER 2006, August 20-24, 2006, Detroit, Michigan. Sponsored by the U.S. DOE's EERE FreedomCar and Fuel Partnership and 21st Century Truck Programs. ...

  10. DOE/SC-ARM/TR-124 Interpolated Sounding Value-Added Product

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... MERGESONDE without including the model data from the European Centre for Medium-range Weather Forecasting (ECMWF). ... Shouxian, China (HFE): hfeinterpolatedsondeM1....

  11. Polyacrylonitrile nanofibers with added zeolitic imidazolate frameworks (ZIF-7) to enhance mechanical and thermal stability

    SciTech Connect (OSTI)

    Lee, Min Wook; An, Seongpil; Song, Kyo Yong; Joshi, Bhavana N.; Jo, Hong Seok; Yoon, Sam S. E-mail: ayarin@uic.edu; Al-Deyab, Salem S.; Yarin, Alexander L. E-mail: ayarin@uic.edu

    2015-12-28

    Zeolitic imidazolate framework 7/polyacrylonitrile (ZIF-7/PAN) nanofiber mat of high porosity and surface area can be used as a flexible fibrous filtration membrane that is subjected to various modes of mechanical loading resulting in stresses and strains. Therefore, the stress-strain relation of ZIF-7/PAN nanofiber mats in the elastic and plastic regimes of deformation is of significant importance for numerous practical applications, including hydrogen storage, carbon dioxide capture, and molecular sensing. Here, we demonstrated the fabrication of ZIF-7/PAN nanofiber mats via electrospinning and report their mechanical properties measured in tensile tests covering the elastic and plastic domains. The effect of the mat fabrication temperature on the mechanical properties is elucidated. We showed the superior mechanical strength and thermal stability of the compound ZIF-7/PAN nanofiber mats in comparison with that of pure PAN nanofiber mats. Material characterization including scanning electron microscope, energy-dispersive X-ray spectroscopy, tensile tests, differential scanning calorimetry, and Fourier transform infrared spectroscopy revealed the enhanced chemical bonds of the ZIF-7/PAN complex.

  12. "NAICS",,"per Employee","of Value Added","of Shipments"

    U.S. Energy Information Administration (EIA) Indexed Site

    Btu)" ,,"Total United States" 311,"Food",3.8,4.3,4.1 ... 324,"Petroleum and Coal Products",5.2,1.6,0.9 324110," Petroleum Refineries",0,0,0 324199," ...

  13. High power ring methods in ADS-R application (Conference) | SciTech...

    Office of Scientific and Technical Information (OSTI)

    Close Cite: Bibtex Format Close 0 pages in this document matching the terms "" Search For Terms: Enter terms in the toolbar above to search the full text of this document for ...

  14. RAPID/Help/Best Practices/Adding Best Practice Templates and...

    Open Energy Info (EERE)

    selecting this and saving will remove any previous example that was uploaded or linked. Retrieved from "http:en.openei.orgwindex.php?titleRAPIDHelpBestPractices...

  15. Radiatively Important Parameters Best Estimate (RIPBE): An ARM Value-Added Product

    SciTech Connect (OSTI)

    McFarlane, S; Shippert, T; Mather, J

    2011-06-30

    The Radiatively Important Parameters Best Estimate (RIPBE) VAP was developed to create a complete set of clearly identified set of parameters on a uniform vertical and temporal grid to use as input to a radiative transfer model. One of the main drivers for RIPBE was as input to the Broadband Heating Rate Profile (BBHRP) VAP, but we also envision using RIPBE files for user-run radiative transfer codes, as part of cloud/aerosol retrieval testbeds, and as input to averaged datastreams for model evaluation.

  16. Aerosol Optical Depth Value-Added Product for the SAS-He Instrument

    SciTech Connect (OSTI)

    Ermold, B; Flynn, CJ; Barnard, J

    2013-11-27

    The Shortwave Array Spectroradiometer – Hemispheric (SAS-He) is a ground-based, shadowband instrument that measures the direct and diffuse solar irradiance. In this regard, the instrument is similar to the Multi-Filter Rotating Shadowband Radiometer (MFRSR) – an instrument that has been in the ARM suite of instruments for more than 15 years. However, the two instruments differ significantly in wavelength resolution and range. In particular, the MFRSR only observes the spectrum in six discrete wavelength channels of about 10 nm width from 415 to 940 nm. The SAS-He, in contrast, incorporates two fiber-coupled grating spectrometers: a Si CCD spectrometer with over 2000 pixels covering the range from 325-1040 nm with ~ 2.5 nm resolution ,and an InGaAs array spectrometer with 256 pixels covering the wavelength range from 960-1700 nm with ~ 6 nm resolution.

  17. Evaluation of GCM Column Radiation Models Under Cloudy Conditions with The Arm BBHRP Value Added Product

    SciTech Connect (OSTI)

    Oreopoulos, Lazaros; Norris, Peter M.

    2010-03-14

    The overarching goal of the project was to improve the transfer of solar and thermal radiation in the most sophisticated computer tools that are currently available for climate studies, namely Global Climate Models (GCMs). This transfer can be conceptually separated into propagation of radiation under cloudy and under cloudless conditions. For cloudless conditions, the factors that affect radiation propagation are gaseous absorption and scattering, aerosol particle absorption and scattering and surface albedo and emissivity. For cloudy atmospheres the factors are the various cloud properties such as cloud fraction, amount of cloud condensate, the size of the cloud particles, and morphological cloud features such as cloud vertical location, cloud horizontal and vertical inhomogeneity and cloud shape and size. The project addressed various aspects of the influence of the above contributors to atmospheric radiative transfer variability. In particular, it examined: (a) the quality of radiative transfer for cloudless and non-complex cloudy conditions for a substantial number of radiation algorithms used in current GCMs; (b) the errors in radiative fluxes from neglecting the horizontal variabiity of cloud extinction; (c) the statistical properties of cloud horizontal and vertical cloud inhomogeneity that can be incorporated into radiative transfer codes; (d) the potential albedo effects of changes in the particle size of liquid clouds; (e) the gaseous radiative forcing in the presence of clouds; and (f) the relative contribution of clouds of different sizes to the reflectance of a cloud field. To conduct the research in the various facets of the project, data from both the DOE ARM project and other sources were used. The outcomes of the project will have tangible effects on how the calculation of radiative energy will be approached in future editions of GCMs. With better calculations of radiative energy in GCMs more reliable predictions of future climate states will be attainable, thus affecting public policy decisions with great impact to public life.

  18. DOE/SC-ARM-TR-102 Sonde Adjust Value-Added Product Technical...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... Slope of Alaska * twpsondeadjustC1.c1 - Tropical Western Pacific (TWP) Manus, Papua New Guinea * twpsondeadjustC2.c1 - TWP Nauru D Troyan, December 2011, DOESC-ARM-TR-102 6 * ...

  19. Microsoft Word - Los Alamos National Security, LLC_VOL AD&D BHS...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    see below) a death benefit if you die due to a covered accident while you are insured. ... injury, paralysis or death resulting from an accident at or outside of work is real. ...

  20. Assessing the Economic Viability of Bio-based Products for Missouri Value-added Crop Production

    SciTech Connect (OSTI)

    Nicholas Kalaitzandonakes

    2005-11-30

    While research and development on biobased products has continued strong over the years, parallel attention on the economics and management of such product innovation has been lacking. With the financial support of the Department of Energy, the Economics and Management of Agrobiotechnology Center at the University of Missouri-Columbia has launched a pilot graduate education program that seeks to fill the gap. Within this context, a multi-disciplinary research and teaching program has been structured with an emphasis on new product and innovation economics and management. More specifically, this pilot graduate education program has the following major objectives: (1) To provide students with a strong background in innovation economics, management, and strategy. (2) To diversify the students academic background with coursework in science and technology. (3) To familiarize the student with biobased policy initiatives through interaction with state and national level organizations and policymakers. (4) To facilitate active collaboration with industry involved in the development and production of biobased products. The pilot education program seeks to develop human capital and research output. Although the research is, initially, focused on issues related to the State of Missouri, the results are expected to have national implications for the economy, producers, consumers and environment.

  1. Station-based Surface Data Value-Added Product (Technical Report...

    Office of Scientific and Technical Information (OSTI)

    This document provides information about the input data, quality control (QC) method, and ... Sponsoring Org: USDOE Office of Science (SC), Biological and Environmental Research (BER) ...

  2. Thermodynamics of Taub-NUT/bolt-AdS black holes in Einstein-Gauss-Bonnet gravity

    SciTech Connect (OSTI)

    Khodam-Mohammadi, A.; Monshizadeh, M.

    2009-02-15

    We give a review of the existence of Taub-NUT/bolt solutions in Einstein Gauss-Bonnet gravity with the parameter {alpha} in six dimensions. Although the spacetime with base space S{sup 2}xS{sup 2} has a curvature singularity at r=N, which does not admit NUT solutions, we may proceed with the same computations as in the CP{sup 2} case. The investigation of thermodynamics of NUT/bolt solutions in six dimensions is carried out. We compute the finite action, mass, entropy, and temperature of the black hole. Then the validity of the first law of thermodynamics is demonstrated. It is shown that in NUT solutions all thermodynamic quantities for both base spaces are related to each other by substituting {alpha}{sup CP{sup k}}=[(k+1)/k]{alpha}{sup S{sup 2}}{sup xS{sup 2}}{sup x...S{sub k}{sup 2}}. So, no further information is given by investigating NUT solutions in the S{sup 2}xS{sup 2} case. This relation is not true for bolt solutions. A generalization of the thermodynamics of black holes to arbitrary even dimensions is made using a new method based on the Gibbs-Duhem relation and Gibbs free energy for NUT solutions. According to this method, the finite action in Einstein Gauss-Bonnet is obtained by considering the generalized finite action in Einstein gravity with an additional term as a function of {alpha}. Stability analysis is done by investigating the heat capacity and entropy in the allowed range of {alpha}, {lambda}, and N. For NUT solutions in d dimensions, there exists a stable phase at a narrow range of {alpha}. In six-dimensional bolt solutions, the metric is completely stable for B=S{sup 2}xS{sup 2} and is completely unstable for the B=CP{sup 2} case.

  3. Process for Converting Waste Glass Fiber into Value-Added Products

    Broader source: Energy.gov [DOE]

    Solid wastes are generated at glass fiber manufacturing facilities. With the help of a grant from DOE’s Inventions and Innovation Program, Albacem, LLC, developed a new process that converts these...

  4. Appendices A-D, Bioenergy Technologies Office Multi-Year Program...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... other direct costs (buildings, additional piping, and site development). General Cost Estimation Methodology The Office uses consistent, rigorous engineering approaches for ...

  5. Geothermal drilling ad completion technology development program. Semi-annual progress report, April-September 1979

    SciTech Connect (OSTI)

    Varnado, S.G.

    1980-05-01

    The progress, status, and results of ongoing Research and Development (R and D) within the Geothermal Drilling and Completion Technology Development Program are described. The program emphasizes the development of geothermal drilling hardware, drilling fluids, and completion technology. Advanced drilling systems are also under development. The goals of the program are to develop the technology required to reduce well costs by 25% by 1982 and by 50% by 1986.

  6. Proceedings of the AD HOC Workshop on Ceramics for Li/FeS{sub 2} batteries

    SciTech Connect (OSTI)

    Not Available

    1993-12-31

    Representatives from industry, the U.S. Advanced Battery Consortium (USABC), DOE, national laboratories, and other govt agencies met to develop recommendations and actions for accelerating the development of ceramic components critical to the successful introduction of the Li/FeS{sub 2} bipolar battery for electric vehicles. Most of the workshop is devoted to electrode materials, bipolar designs, separators, and bipolar plates. The bulk of this document is viewographs and is divided into: ceramics, USABC overview, SAFT`s Li/FeS{sub 2} USABC program, bipolar Li/FeS{sub 2} component development, design requirements for bipolar plates, separator design requirements, compatibility of ceramic insulators with lithium, characterization of MgO for use in separators, resistivity measurements of separators, sintered AlN separators for LiMS batteries, etc.

  7. Tensors mesons in AdS/QCD (Journal Article) | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    DOE Contract Number: DE-AC02-05CH11231 Resource Type: Journal Article Resource Relation: Journal Name: Physical Review D; Journal Volume: 74; Related Information: Journal ...

  8. Toward the AdS/CFT gravity dual for high energy collisions. I...

    Office of Scientific and Technical Information (OSTI)

    Assuming that in the collisions of 'walls' of charges multiple stretching strings are created, we also consider the motion of a 3D stretching membrane. We then argue that a ...

  9. On the Importance of Composability of Ad Hoc Mobile Middleware and Trust Management

    SciTech Connect (OSTI)

    Drugan, Ovidiu VALENTIN.; Dionysiou, Ioanna; Bakken, David E.; Plagemann, Thomas P.; Hauser, Carl H.; Frincke, Deb A.

    2005-11-01

    Deciphering trust, using a universally acceptable set of rules and mechanisms, is a challenging process because of trust?s varying interpretations. Researchers have defined trust concepts for many perspectives, with the result that trust definitions overlap or contradict each other [8]. There are numerous models of trust, although the classification of neither trust nor its models has been identified yet. Nevertheless, there is a subtle feature that differentiates a generic trust model from a trust management system; the former category focuses on modeling specific aspects of trust, such as authentication, reputation, and cooperation, whereas the second focuses on dynamically managing the lifespan of trust relationships. The majority of trust models and trust management systems have been studied and their limitations are well known, ranging from being too complex to being too simple. This paper addresses that issue. http://www.informatik.hu-berlin.de/rok/isas2005.html

  10. DOE/SC-ARM/TR-103 Cloud Condensation Nuclei Profile Value-Added

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    at the surface The CCN at the surface is measured by a Droplet Measurement Technologies (DMT) single-column CCN counter as part of the AOS and obtained from the aosccn datastream...

  11. Toward the AdS/CFT gravity dual for high energy collisions. III...

    Office of Scientific and Technical Information (OSTI)

    on the boundary sees a very peculiar quasiequilibrium: while the average stress tensor contains the equilibrium plasma energy and pressure at ...

  12. Method for the delignification of lignocellulosic material by adding a dialkyl substituted octahydroanthraquinone

    DOE Patents [OSTI]

    Dimmel, Donald R.

    2000-01-01

    The present invention provides a method for the synthesis of substituted octahydroanthraquinones and substituted anthraquinones which are effective for pulping of lignocellulosics.

  13. Process Design for the Biocatalysis of Value-Added Chemicals from Carbon Dioxide

    SciTech Connect (OSTI)

    Mark A. Eiteman

    2006-07-31

    This report describes results toward developing a process to sequester CO{sub 2} centered on the enzyme pyruvate carboxylase. The process involves the use of bacteria to convert CO{sub 2} and glucose as a co-substrate and generates succinic acid as a commodity chemical product. The phases of research have included strain development and process development. Though we continue to work on one important component of strain development, the research has principally focused on process development. In the previous year we constructed several strains which would serve as templates for the CO{sub 2} sequestration, including the knock-out of genes involved in the formation of undesirable byproducts. This project period the focus has been on the integration of the pyruvate carboxylase gene (pyc) onto the E. coli chromosome. This has proven to be a difficult task because of relatively low expression of the gene and resulting low enzyme activity when only one copy of the gene is present on the chromosome. Several molecular biology techniques have been applied, with some success, to improve the level of protein activity as described herein. Progress in process development has come as a result of conducting numerous fermentation experiments to select optimal conditions for CO{sub 2} sequestration. This process-related research has progressed in four areas. First, we have clarified the range of pH which results in the optimal rate of sequestration. Second, we have determined how the counterion used to control the pH affects the sequestration rate. Third, we have determined how CO{sub 2} gas phase composition impacts sequestration rate. Finally, we have made progress in determining the affect of several potential gaseous impurities on CO{sub 2} sequestration; in particular we have completed a study using NO{sub 2}. Although the results provide significant guidance as to process conditions for CO{sub 2} sequestration and succinate production, in some cases we do not yet understand the underlying mechanism or reason for the observation. Also, process development has used the ''baseline'' organism in the absence of the pyruvate carboxylase gene. In some cases the conclusions regarding the process may change when the ''final'' strain is used which incorporates the key CO{sub 2} sequestration technology.

  14. The Integrated Biorefinery: Conversion of Corn Fiber to Value-added Chemicals

    SciTech Connect (OSTI)

    Susanne Kleff

    2007-03-24

    This presentation provides a summary of Michigan Biotechnology Institute's efforts to employ the corn fiber fraction of a dry grind ethanol plant as a feedstock to produce succinic acid which has potential as a building block intermediate for a wide range of commodity chemicals.

  15. 2D Gridded Surface Data Value-Added Product (Technical Report...

    Office of Scientific and Technical Information (OSTI)

    High-density ARM sites deployed at the Southern Great Plains (SGP) allow us to observe the spatial patterns of variables of scientific interests. The upcoming megasite at SGP with ...

  16. Pellet ad pellet-blanket neutronics and photonics for electron beam fusion

    SciTech Connect (OSTI)

    Ragheb, M.M.H.; Moses, G.A.; Maynard, C.W.

    1980-04-01

    Pellet and coupled pellet-blanket time-integrated neutronics and photonics calculations are reported for a representative low-gain (25), low-compression (deuterium-tritium core pr = 9.4 kg/m/sup 2/) pellet design for an electron beam fusion reactor. Tungsten, lead, and natural uranium are compared as pusher-tamper materials. In the three cases, neutron balances show that neutron multiplication in the pellet compensates for the energy losses and spectral softening due to neutron interactions. Fissile breeding cannot be achieved in the natural uranium case, since the fission reaction predominates. Substantive additonal energy can be obtained (approx. 5.5 MeV/source neutron) in the pellet if natural uranium is used as the tamper material. Neutron and gamma spectra from the pellet microexplosions are given.

  17. Research To Develop Both Fuels And Value-Added Chemicals From...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Renewable Energy Laboratory (NREL) and DuPont today announced a joint research ... The 7.7 million Cooperative Research and Development Agreement calls for DuPont and NREL ...

  18. ADS support for Hardy Oil`s subsea projects: Simple and cost effective

    SciTech Connect (OSTI)

    Gorman, N.; McCullough, G.; Subik, D.

    1996-12-31

    The use of Atmospheric Diving Systems in support of the Shasta and Mustique Subsea Field Developments for Hardy Oil and Gas and Texaco is reviewed as a simple and cost-effective solution to the subsea intervention requirements of underwater completion tiebacks. The design and installation of the pull-tube system for dual flowlines and a control umbilical on Texaco`s Green Canyon 6A Platform is reviewed as an example of how Atmospheric Diving Systems can be utilized to perform the difficult subsea construction of a pull-tube system on an existing deepwater platform. The design and installation of the flexible flowline jumpers and umbilical flying leads connecting the three subsea trees to the flowline termination skids and the umbilical termination assemblies is reviewed as an example of how Atmospheric Diving Systems can be utilized to connect flowlines and control umbilicals to subsea trees with standard bolted flanged connections and flying leads using the well completion drill rig as a work platform.

  19. Microsoft Word - Los Alamos National Security, LLC_VOL AD&D BHS...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Insurance pays benefits for accidental loss of limbs, thumb and index finger, speech, hearing, and sight. * Voluntary Accidental Death & Dismemberment Insurance covers...

  20. Appendices A-D, Bioenergy Technologies Office Multi-Year Program Plan, March 2015

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    A: Technical Projection Tables A-1 Last revised: March 2015 Appendix A: Technical Projection Tables Table A-1: Biomass Volume and Price Projections through 2030 (Minus Allocations for Losses, Chemicals, and Pellets) at an Estimated $80/Dry Ton Delivered Feedstock Cost** Feedstock Category Feedstock Resource Feedstock Available for Cellulosic Fuel Production (MM Dry Tons/Year) SOT Projection 2013 2014 2015 2016 2017 2018 2022 2030 Agricultural Residues Corn Stover 70.7 83.2 106.7 131.8 138.1

  1. EnergyWorks Grabs Attention in Calm and Stormy Weather with Intuitive Ads

    Broader source: Energy.gov [DOE]

    There's an old saying in advertising that you have to hit a consumer at least three times with your message before it sinks in. To build brand recognition and mobilize residents to take action on energy efficiency upgrades, EnergyWorks of Philadelphia, Pennsylvania, created a three-phase approach to reach consumers with unique marketing tactics using a diverse array of media outlets.

  2. Coherence penalty functional: A simple method for adding decoherence in Ehrenfest dynamics

    SciTech Connect (OSTI)

    Akimov, Alexey V. E-mail: oleg.prezhdo@rochester.edu; Long, Run; Prezhdo, Oleg V. E-mail: oleg.prezhdo@rochester.edu

    2014-05-21

    We present a new semiclassical approach for description of decoherence in electronically non-adiabatic molecular dynamics. The method is formulated on the grounds of the Ehrenfest dynamics and the Meyer-Miller-Thoss-Stock mapping of the time-dependent Schrdinger equation onto a fully classical Hamiltonian representation. We introduce a coherence penalty functional (CPF) that accounts for decoherence effects by randomizing the wavefunction phase and penalizing development of coherences in regions of strong non-adiabatic coupling. The performance of the method is demonstrated with several model and realistic systems. Compared to other semiclassical methods tested, the CPF method eliminates artificial interference and improves agreement with the fully quantum calculations on the models. When applied to study electron transfer dynamics in the nanoscale systems, the method shows an improved accuracy of the predicted time scales. The simplicity and high computational efficiency of the CPF approach make it a perfect practical candidate for applications in realistic systems.

  3. DOE/SC-ARM/TR-128 Tower Water-Vapor Mixing Ratio Value-Added

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    by the U.S. Department of Energy, Office of Science, Office ... 11 8.0 VAP Specific Glossary and Acronyms......the Temperature, Humidity, Wind, and Pressure System ...

  4. ARM Value-Added Product (VAP) Monthly Status Report (March 2007)

    SciTech Connect (OSTI)

    Comstock, J; Flynn, C; Jensen, M; Long, C; Turner, D; Xie, S

    2007-03-01

    The original temporal resolution of the Atmospheric Radiation Measurement (ARM) AERI instruments was 8 minutes, where each cycle consisted of a 3-minute sky-view period and 2-minute views at each of the two blackbody targets. This sampling strategy was chosen to achieve the desired signal-to-noise ratio for clear-sky spectroscopy and profiling studies. To make the AERI observations more useful for cloud research, the temporal resolution has been decreased by an order of magnitude; however, this greatly increases the random error in these observations. This VAP uses a principle component analysis noise filter to significantly reduce the amount of uncorrelated random error in the AERI observations. The noise-filtered 'rapid-sample' AERI observations have approximately the same amount of random error as the original AERI radiance data. The AEROSOL BE VAP provides temporally and spatially continuous vertical profiles of ambient aerosol optical properties including scattering, absorption, and extinction coefficients, single scattering albedo and asymmetry parameter. It uses a combination of passive radiometers, in-situ surface measurements, empirical relationships, climatologies, and model input. It is a direct input to the BBHRP VAP, an ACRF programmatic metric.

  5. Not in the want ads: Finding the emerging environmental occupations within economic and social change

    SciTech Connect (OSTI)

    Palumbo, M.J.

    1995-12-01

    The transition of America`s work force is an evolving process. Environmental issues, in general, and environment occupational dynamics, in specific, are complex and involve a wide variety of private and public organizations. The paper advocates a federal government role in directly supporting sustainable development oriented environmental programs to assist in the transition of today`s labor into the skilled and growing occupations of tomorrow. The American economy and the industrial organizations which define it are changing drastically. Much of this change has been influenced by compliance to strict environmental regulation and enforcement, protective labor laws, and the increased adoption of pollution prevention processes and principles. Additional factors include: increased international competition and free trade, a global recession, and increasingly flexible capital transfer and monetary markets. As the world approaches the turn of the century, technological change dominates the economic landscape. There is no clearly drawn map or model on how American labor will integrate, prepare, and train for the new jobs created from the practice of sustainable development. The policies and commitments necessary to drive the transition of our occupational work force are clearly in their infancy. Consequently, the study will collect and synthesize existing information related to environmental occupations, job growth, and sustainable development oriented programs. The study will conclude with a discussion of common themes and policies for business and labor leaders, and environmental lists which maximize economic efficiency, protect the environment, and ensure that job creation is achieved.

  6. The value of adding regional to local stakeholder involvement in evaluating the acceptability of innovative technologies

    SciTech Connect (OSTI)

    Peterson, T.; McCabe, G.; Niesen, K.; Patricia, S.

    1995-12-01

    Technology is urgently needed to clean up contamination by volatile organic compounds at United States Department of Energy (DOE) and industrial sites throughout the country. In many cases, however, existing technology is too slow, inefficient, or expensive. The record of technology development is similarly disappointing. Remediation technologies developed at great expense and evaluated piecemeal over long periods have not been deployed because, in the end, the public judged them ineffective or unacceptable. The need for remediation is too great and resources too limited to continue with ineffective technology evaluation. Early and continuing stakeholder involvement is essential to developing successful, deployable technologies. In order to make good decisions about which technologies to deploy, remedial project managers need to know stakeholders` requirements for the performance of proposed technologies. Expanding stakeholder involvement regionally identifies the concerns of a broad range of stakeholders at a arid DOE sites throughout the West - issues that must be taken into account if technologies are to be accepted for wide deployment.

  7. Adding the Fourth "R": A Systems Approach to Solving the Hacker's Arms Race

    SciTech Connect (OSTI)

    Endicott-Popovsky, Barbara E.; Frincke, Deborah A.

    2006-01-01

    In this paper, the authors propose a modification of CERT's 3 R model to include a 4 th R, the discipline of Redress, identified as a necessary step to end the hacker arms race. Redress will require implementation of computer forensic investigation methods, tools and techniques that will permit evidence gathered to be admissible in a court of law, a standard not often understood or followed by many who are responsible for securing networks today. This leads the authors to conclude that there is a need for future work that will involve re-examination of the mechanisms and procedures used to collect evidence of network intrusions in order to ensure that the Rules of Evidence requirements are considered.

  8. Docket # EERE-2014-BT-STD-0051, and/or RIN 1904-AD40 Ex Parte...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    PDF icon DoE GasCompressors Efficiency HOERBIGER 9-1-2015 AdditionalResponse More Documents & Publications Natural Gas Infrastructure R&D and Methane Emissions Mitigation Workshop ...

  9. Ad_10-4-11_3-25x4_rev1.ai

    National Nuclear Security Administration (NNSA)

    Production of Tritium in a Commercial Light Water Reactor (CLWR) Supplemental Environmental Impact Statement (SEIS) National Nuclear Security Administration Public Scoping Meeting ...

  10. High-temperature phase transformation in Cr added TiAl base alloy

    SciTech Connect (OSTI)

    Abe, E.; Niinobe, K.; Nobuki, M.; Nakamura, M.; Tsujimoto, T.

    1999-07-01

    The authors have investigated a microstructure evolution of a Ti-48Al-3.5Cr (in at.%) alloy at high-temperatures ({gt} 1,473K). In the alloy annealed at 1673K for 1.8ks, followed by air-cooling, a characteristic microstructure with a feathery fashion was uniformly formed. From a cooling-rate-controlling study, it was found that formation of the feathery structure is accomplished during continuous cooling from 1673K to 1573K, within the {alpha} + {gamma} two-phase region. Transmission electron microscopy revealed that the feathery structure is composed of lamellar colonies (5--10{micro}m) which are crystallographically tilted slightly (a few degree) with their neighbors. A surprising fact is that lamellae in each colony are mostly the {gamma} phase with few {alpha}{sub 2} phase less than 5% in volume. This suggests that the feathery structure is a metastable product and has not resulted from the {alpha} {r{underscore}arrow} {alpha} + {gamma} transformation above 1,573 K. Instead, the feathery structure formation should be attributed to the non-equilibrium {alpha} {r{underscore}arrow} {gamma} transformation which occurs at high-temperatures with a small degree of supercooling. The authors discuss this interesting phase transformation in terms of the {alpha} {r{underscore}arrow} {gamma} massive transformation, based on the continuous-cooling-transformation (CCT) diagram constructed for the present alloy.

  11. Corrosion inhibition when distilling coal liquids by adding cresols or phenols

    DOE Patents [OSTI]

    Baumert, Kenneth L.; Sagues, Alberto A.; Davis, Burtron H.

    1985-01-01

    Fractionation apparatus material corrosion in a coal liquefaction system is reduced by addition of compounds having a pK.sub.b <6 to tower feed streams or to the tower itself.

  12. Utilisation of single added fatty acids by consortia of digester sludge in batch culture

    SciTech Connect (OSTI)

    Wagner, Andreas Otto; Gstrauntaler, Gudrun; Illmer, Paul

    2010-10-15

    Inocula derived from an anaerobic digester were used to study (i) their potential for methane production and (ii) the utilisation rates of different short chain fatty acids (SCFAs) by the microbial community in defined media with mono-carbon sources (formic-, acetetic-, propionic-, butyric acid) in batch culture. It could be demonstrated that the microbial reactor population could be transferred successfully to the lab, and its ability to build up methane was present even with deteriorating biogas plant performance. Therefore, this reduction in performance of the biogas plant was not due to a decrease in abundance, but due to an inactivity of the microbial community. Generally, the physico-chemical properties of the biogas plant seemed to favour hydrogenotrophic methanogens, as seen by the high metabolisation rates of formate compared with all other carbon sources. In contrast, acetoclastic methanogenesis could be shown to play a minor role in the methane production of the investigated biogas plant, although the origin of up to 66% of methane is generally suggested to be generated through acetoclastic pathway.

  13. ARM - VAP Process - mfrsrcldod

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Productsmfrsrcldod Documentation & Plots Technical Report Data Management Facility Plots (Quick Looks) ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send VAP : Cloud Optical Properties from MFRSR Using Min Algorithm (MFRSRCLDOD) Instrument Categories Aerosols, Radiometric The mfrsrcldod1min value-added product produces cloud optical depth for overcast liquid clouds using narrowband irradiance measurements from the

  14. ARM - Instrument - brs

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    govInstrumentsbrs Documentation ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Instrument : Broadband Radiometer Station (BRS) Instrument Categories Radiometric Output Value-Added Products This instrument is an input to the following value-added products, which provide improved measurements or derived quantities. 15swfanalbrs1long : Short Wave Flux Analysis: 15-min resolution on BRS data, Long algorithm

  15. Development of value-added products from alumina industry mineral wastes using low-temperature-setting phosphate ceramics

    SciTech Connect (OSTI)

    Wagh, A.S.; Jeong, Seung-Young; Singh, D.

    1996-01-01

    A room-temperature process for stabilizing mineral waste streams has been developed, based on acid-base reaction between MgO and H3PO4 or acid phosphate solution. The resulting waste form sets into a hard ceramic in a few hours. In this way, various alumina industry wastes, such as red mud and treated potliner waste, can be solidified into ceramics which can be used as structural materials in waste management and construction industry. Red mud ceramics made by this process were low-porosity materials ({approx}2 vol%) with a compression strength equal to portland cement concrete (4944 psi). Bonding mechanism appears to be result of reactions of boehmite, goethite, and bayerite with the acid solution, and also encapsulation of red mud particles in Mg phosphate matrix. Possible applications include liners for ponds and thickned tailings disposal, dikes for waste ponds, and grouts. Compatability problems arising at the interface of the liner and the waste are avoided.

  16. Production of coal-based fuels and value-added products: coal to liquids using petroleum refinery streams

    SciTech Connect (OSTI)

    Clifford, C.E.B.; Schobert, H.H.

    2008-07-01

    We are studying several processes that utilize coal, coal-derived materials, or biomass in existing refining facilities. A major emphasis is the production of a coal-based replacement for JP-8 jet fuel. This fuel is very similar to Jet A and jet A-1 in commercial variation, so this work has significant carry-over into the private sector. We have been focusing on three processes that would be retrofitted into a refinery: (1) coal tar/refinery stream blending and hydro-treatment; (2) coal extraction using refinery streams followed by hydro-treatment; and (3) co-coking of coal blended with refinery streams. 4 figs., 5 tabs.

  17. Hydropower Upgrades to Yield Added Generation at Average Costs Less Than 4 cents per kWh- Without New Dams

    Broader source: Energy.gov [DOE]

    $30.6 million Recovery Act investment by the Department of Energy highlights the additional potential of hydro power

  18. Proposed Junction-Box Stress Test (Using an Added Weight) for Use During the Module Qualification (Presentation)

    SciTech Connect (OSTI)

    Miller, D. C.; Wohlgemuth, J. H.; Kurtz, S. R.

    2012-02-01

    Engineering robust adhesion of the junction-box (j-box) is a hurdle typically encountered by photovoltaic (PV) module manufacturers during product development. Furthermore, there are historical incidences of adverse effects (e.g., fires) caused when the j-box/adhesive/module system has failed in the field. The addition of a weight to the j-box during the 'damp heat' IEC qualification test is proposed to verify the basic robustness of the j-box adhesion system. The details of the proposed test are described, in addition to the preliminary results conducted using representative materials and components.

  19. Greater Caribbean Energy and Environment Future. Ad hoc working group report, Key Biscayne, Florida, October 26-28, 1980

    SciTech Connect (OSTI)

    Thorhaug, A.

    1980-01-01

    This report of Workshop I (presented in outline form) by the Greater Caribbean Energy and Environment Foundation begin an intensive focus on the energy problems of the Caribbean. The process by which environmental assessments by tropical experts can be successfully integrated into energy decisions is by: (1) international loan institutions requiring or strongly recommending excellent assessments; (2) engineering awareness of total effects of energy projects; (3) governmental environmental consciousness-raising with regard to natural resource value and potential inadvertent and unnecessary resource losses during energy development; and (4) media participation. Section headings in the outline are: preamble; introduction; research tasks: today and twenty years hence; needed research, demonstration and information dissemination projects to get knowledge about Caribbean energy-environment used; summary; recommendations; generalized conclusions; and background literature. (JGB)

  20. The Added Economic and Environmental Value of Solar Thermal Systems in Microgrids with CombinedHeat and Power

    SciTech Connect (OSTI)

    Marnay, Chris; Stadler, Michael; Cardoso, Goncalo; Megel, Olivier; Lai, Judy; Siddiqui, Afzal

    2009-08-15

    The addition of solar thermal and heat storage systems can improve the economic, as well as environmental attraction of micro-generation systems, e.g. fuel cells with or without combined heat and power (CHP) and contribute to enhanced CO2 reduction. However, the interactions between solar thermal collection and storage systems and CHP systems can be complex, depending on the tariff structure, load profile, etc. In order to examine the impact of solar thermal and heat storage on CO2 emissions and annual energy costs, a microgrid's distributed energy resources (DER) adoption problem is formulated as a mixed-integer linear program. The objective is minimization of annual energy costs. This paper focuses on analysis of the optimal interaction of solar thermal systems, which can be used for domestic hot water, space heating and/or cooling, and micro-CHP systems in the California service territory of San Diego Gas and Electric (SDG&E). Contrary to typical expectations, our results indicate that despite the high solar radiation in southern California, fossil based CHP units are dominant, even with forecast 2020 technology and costs. A CO2 pricing scheme would be needed to incent installation of combined solar thermal absorption chiller systems, and no heat storage systems are adopted. This research also shows that photovoltaic (PV) arrays are favored by CO2 pricing more than solar thermal adoption.

  1. The added economic and environmental value of plug-in electric vehicles connected to commercial building microgrids

    SciTech Connect (OSTI)

    Stadler, Michael; Momber, Ilan; Megel, Olivier; Gomez, Tomás; Marnay, Chris; Beer, Sebastian; Lai, Judy; Battaglia, Vincent

    2010-08-25

    Connection of electric storage technologies to smartgrids or microgrids will have substantial implications for building energy systems. In addition to potentially supplying ancillary services directly to the traditional centralized grid (or macrogrid), local storage will enable demand response. As an economically attractive option, mobile storage devices such as plug-in electric vehicles (EVs) are in direct competition with conventional stationary sources and storage at the building. In general, it is assumed that they can improve the financial as well as environmental attractiveness of renewable and fossil based on-site generation (e.g. PV, fuel cells, or microturbines operating with or without combined heat and power). Also, mobile storage can directly contribute to tariff driven demand response in commercial buildings. In order to examine the impact of mobile storage on building energy costs and carbon dioxide (CO2) emissions, a microgrid/distributed-energy-resources (DER) adoption problem is formulated as a mixed-integer linear program with minimization of annual building energy costs applying CO2 taxes/CO2 pricing schemes. The problem is solved for a representative office building in the San Francisco Bay Area in 2020. By using employees' EVs for energy management, the office building can arbitrage its costs. But since the car battery lifetime is reduced, a business model that also reimburses car owners for the degradation will be required. In general, the link between a microgrid and an electric vehicle can create a win-win situation, wherein the microgrid can reduce utility costs by load shifting while the electric vehicle owner receives revenue that partially offsets his/her expensive mobile storage investment. For the California office building with EVs connected under a business model that distributes benefits, it is found that the economic impact is very limited relative to the costs of mobile storage for the site analyzed, i.e. cost reductions from electric vehicle connections are modest. Nonetheless, this example shows that some economic benefit is created because of avoided demand charges and on-peak energy. The strategy adopted by the office building is to avoid these high on-peak costs by using energy from the mobile storage in the business hours. CO2 emission reduction strategy results indicate that EVs' contribution at the selected office building are minor.

  2. Effect of added zinc on the properties of cobalt-containing ceramic pigments prepared from layered double hydroxides

    SciTech Connect (OSTI)

    Perez-Bernal, M.E.; Ruano-Casero, R.J.; Rives, V.

    2009-09-15

    Layered double hydroxides (LDHs) with the hydrotalcite-type structure containing Co and Al, or Zn, Co and Al in the brucite-like layers and carbonate in the interlayer have been prepared by coprecipitation. The Zn/Co molar ratio was kept to 1 in all samples, while the divalent/trivalent molar ratio was varied from 2/1 to 1/2. The samples have been characterised by element chemical analysis, powder X-ray diffraction, differential thermal and thermogravimetric analysis, temperature-programmed reduction and FT-IR spectroscopy. A single hydrotalcite-like phase is formed for samples with molar ratio 2/1, which crystallinity decreases as the Al content is increased, developing small amounts of diaspore and dawsonite and probably an additional amorphous phase. Calcination at 1200 deg. C in air led to formation of spinels; a small amount of NaAlO{sub 2} was observed in the Al-rich samples, which was removed by washing. The nature of the spinels formed (containing Co{sup II}, Co{sup III}, Al{sup III} and Zn{sup II}) strongly depends on the cations molar ratio in the starting materials and the calcination treatment, leading to a partial oxidation of Co{sup II} species to Co{sup III} ones. Colour properties (L*a*b*) of the original and calcined solids have been measured. While the original samples show a pink colour (lighter for the series containing Zn), the calcined Co,Al samples show a dark blue colour and the Zn,Co,Al ones a green colour. Changes due to the different molar ratios within a given calcined series are less evident than between samples with the same composition in different series. These calcined materials could be usable as ceramic pigments. - Abstract: Mixed oxides from layered double hydroxides (LDHs) with the hydrotalcite-type structure containing Co and Al or Zn, Co and Al in the brucite-like layers are potential candidates for ceramic pigments with tunable colour properties. Display Omitted

  3. Microsoft Word - FAQs _English_ 01-22-10 WITH NEW PARAGRAPHS AND EDITS ADDED mk 01-26-10.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Draft Tank Closure and Waste Management Environmental Impact Statement for the Hanford Site, Richland, Washington (Draft TC & WM EIS) (DOE/EIS-0391-D) Frequently Asked Questions What are the U.S. Department of Energy (DOE) proposed actions in the Draft TC & WM EIS? The Draft TC & WM EIS (DOE/EIS-0391-D) evaluates three sets of proposed actions, as follows: * Retrieve and treat the waste remaining in 177 underground storage tanks; store the high-level radioactive waste (HLW); dispose

  4. EA-2020: Energy Efficiency Design Standards for New Federal Low-Rise Residential Buildings (RIN# 1904-AD56)

    Broader source: Energy.gov [DOE]

    This EA will evaluate the potential environmental impacts of implementing the provisions in the Energy Conservation and Production Act (ECPA) that require DOE to update the baseline Federal energy efficiency performance standards for the construction of new Federal buildings, including low-rise residential buildings.

  5. Top Value-Added Chemicals from Biomass - Volume IIResults of Screening for Potential Candidates from Biorefinery Lignin

    SciTech Connect (OSTI)

    Holladay, John E.; White, James F.; Bozell, Joseph J.; Johnson, David

    2007-10-01

    This report evaluates lignins role as a renewable raw material resource. Opportunities that arise from utilizing lignin fit into one of three categories: 1)power, fuel and syngas (generally near-term opportunities) 2) macromolecules (generally medium-term opportunities) 3) aromatics and miscellaneous monomers (long-term opportunities). Biorefineries will receive and process massive amounts of lignin. For this reason, how lignin can be best used to support the economic health of the biorefinery must be defined. An approach that only considers process heat would be shortsighted. Higher value products present economic opportunities and the potential to significantly increase the amount of liquid transportation fuel available from biomass. In this analysis a list of potential uses of lignin was compiled and sorted into product types which are broad classifications (listed above as powerfuelsyngas; macromolecules; and aromatics). In the first product type (powerfuelgasification) lignin is used purely as a carbon source and aggressive means are employed to break down its polymeric structure. In the second product type (macromolecules) the opposite extreme is considered and advantage of the macromolecular structure imparted by nature is retained in high-molecular weight applications. The third product type (aromatics) lies somewhere between the two extremes and employs technologies that would break up lignins macromolecular structure but maintain the aromatic nature of the building block molecules. The individual opportunities were evaluated based on their technical difficulty, market, market risk, building block utility, and whether a pure material or a mixture would be produced. Unlike the Sugars Top 10 report it was difficult to identify the ten best opportunities, however, the potential opportunities fell nicely into near-, medium- and long-term opportunities. Furthermore, the near-, medium- and long-term opportunities roughly align with the three product types. From this analysis a list of technical barriers was developed which can be used to identify research needs. Lignin presents many challenges for use in the biorefinery. Chemically it differs from sugars having a complex aromatic substructure. Unlike cellulose, which has a relatively simple substructure of glucose subunits, lignin has a high degree of variability in its structure which differs both from biomass source and from the recovery process used. In addition to its variability lignin is also reactive and to some degree less stable thermally and oxidatively to other biomass streams. What this means is that integrating a lignin process stream within the biorefinery will require identifying the best method to separate lignin from biomass cost-effectively.

  6. Task 4.9 -- Value-added products from syngas. Semi-annual report, January 1--June 30, 1996

    SciTech Connect (OSTI)

    1997-08-01

    The work on advanced fuel forms in 1996 is focused in part on the synthesis of higher alcohols from mixtures of hydrogen and carbon monoxide (syngas) from coal gasification. This art has been practiced for many years in Germany, South Africa, and the US. The conversion of coal gasification products to commercially valuable alcohols will provide an important new market for current and future gasification plants. Initial work in this project utilized a novel molybdenum catalyst previously shown to be active for hydrodesulfurization reactions of coal liquids. This support for the active metal is a mixed oxide capable of interaction with the metal sites for catalysis of carbon monoxide reductions. A pressurized fixed-bed flow-through reactor was constructed and one catalyst was tested under a variety of conditions. Unfortunately, this catalyst with low metal loading was inactive. Therefore, a catalyst with a high metal loading and additional metal sites (cobalt, potassium) is now being tested.

  7. Task 4.9 -- Value-added products from syngas. Semi-annual report, July 1--December 31, 1996

    SciTech Connect (OSTI)

    Olson, E.S.; Sharma, R.K.

    1997-08-01

    The work on advanced fuel forms in 1996 focused on the synthesis of higher alcohols from mixtures of hydrogen and carbon dioxide (syngas) from coal gasification. Initial work in this project utilized a novel molybdenum sulfide catalyst previously shown to be active for hydrodesulfurization reactions of coal liquids. A pressurized fixed-bed flow-through reactor was constructed, and the MoS{sub 2} catalysts were tested with syngas under a variety of conditions. Unfortunately, the catalysts, even with higher molybdenum loading and addition of promoters, failed to give alcohol products. A batch reactor test of the catalyst was also conducted, but did not produce alcohol products. Group VIII metals have been used previously in catalysts for syngas reactions. Ruthenium and rhodium catalysts were prepared by impregnation of a hydrotalcite support. Tests with these catalysts in flow-through reactors also did not produce the desired alcohol products. The formation of higher alcohols from smaller ones, such as methanol and ethanol, could be commercially important if high selectivity could be achieved. The methanol and ethanol would be derived from syngas and fermentation, respectively. Based on previous work in other laboratories, it was hypothesized that the hydrotalcite-supported MoS{sub 2} or Ru or Rh catalysts could catalyze the formation of butyl alcohols. Although the desired 1-butanol was obtained in batch reactions with the promoted ruthenium catalyst, the reaction was not as selective as desired. Product suitable for a lower-vapor-pressure gasoline oxygenate additive was obtained, but it may not be economical to market such products in competition with methyl tertiary-butyl ether (MTBE). Flow-through catalytic bed reactions were not successful.

  8. Kaluza-Klein masses of bulk fields with general boundary conditions in AdS{sub 5} space

    SciTech Connect (OSTI)

    Chang, Sanghyeon; Park, Seong Chan; Song, Jeonghyeon

    2005-05-15

    Recently bulk Randall-Sundrum theories with the gauge group SU(2){sub L}xSU(2){sub R}xU(1){sub B-L} have drawn a lot of interest as an alternative to the electroweak symmetry breaking mechanism. These models are in better agreement with electroweak precision data since custodial isospin symmetry on the IR-brane is protected by the extended bulk gauge symmetry. We comprehensively study, in the S{sup 1}/Z{sub 2}xZ{sub 2}{sup '} orbifold, the bulk gauge and fermion fields with the general boundary conditions as well as the bulk and localized mass terms. Master equations to determine the Kaluza-Klein (KK) mass spectra are derived without any approximation, which is an important basic step for various phenomenologies at high energy colliders. The correspondence between orbifold boundary conditions and localized mass terms is demonstrated not only in the gauge sector but also in the fermion sector. As the localized mass increases, the first KK fermion mass is shown to decrease while the first KK gauge boson mass is shown to increase. The degree of gauge coupling universality violation is computed to be small in most parameter space, and its correlation with the mass difference between the top quark and light quark KK mode is also studied.

  9. Adding Complex Terrain and Stable Atmospheric Condition Capability to the Simulator for On/Offshore Wind Farm Applications (SOWFA) (Presentation)

    SciTech Connect (OSTI)

    Churchfield, M. J.

    2013-06-01

    This presentation describes changes made to NREL's OpenFOAM-based wind plant aerodynamics solver so that it can compute the stably stratified atmospheric boundary layer and flow over terrain. Background about the flow solver, the Simulator for Off/Onshore Wind Farm Applications (SOWFA) is given, followed by details of the stable stratification/complex terrain modifications to SOWFA, along with some preliminary results calculations of a stable atmospheric boundary layer and flow over a simple set of hills.

  10. Data:Ad668934-6c65-496d-8870-39601a76dcef | Open Energy Information

    Open Energy Info (EERE)

    1a76dcef No revision has been approved for this page. It is currently under review by our subject matter experts. Jump to: navigation, search Loading... 1. Basic Information 2....

  11. EA-2020: Energy Efficiency Standards for New Federal Low-Rise Residential Buildings’ Baseline Standards Update (RIN 1904-AD56)

    Broader source: Energy.gov [DOE]

    This EA will evaluate the potential environmental impacts of implementing the provisions in the Energy Conservation and Production Act (ECPA) that require DOE to update the baseline Federal energy efficiency performance standards for the construction of new Federal buildings, including low-rise residential buildings.

  12. Process waste assessment approach, training and technical assistance for DOE contractors; FY93 report, ADS {number_sign}35303C

    SciTech Connect (OSTI)

    Pemberton, S

    1994-03-01

    The Department of Energy (DOE) and its contractors are faced with a large waste management problem as are other industries. One of the tools used in a successful waste minimization pollution prevention (WMin/P2) program is a process waste assessment (PWA). The purpose of this project was to share the Kansas City Plant`s (KCP`s) PWA expertise with other DOE personnel and DOE contractors. This consisted of two major activities: (1) The KCP`s PWA graded approach methodology was modified with the assistance of DOE/Defense Program`s laboratories, and (2) PWA training and technical assistance were provided to interested DOE personnel and DOE contractors. This report documents the FY93 efforts, lesson learned, and future plans for both PWA-related activities.

  13. Top Value Added Chemicals From Biomass: I. Results of Screening for Potential Candidates from Sugars and Synthesis Gas

    SciTech Connect (OSTI)

    Werpy, Todd A.; Holladay, John E.; White, James F.

    2004-11-01

    This report identifies twelve building block chemicals that can be produced from sugars via biological or chemical conversions. The twelve building blocks can be subsequently converted to a number of high-value bio-based chemicals or materials. Building block chemicals, as considered for this analysis, are molecules with multiple functional groups that possess the potential to be transformed into new families of useful molecules. The twelve sugar-based building blocks are 1,4-diacids (succinic, fumaric and malic), 2,5-furan dicarboxylic acid, 3-hydroxy propionic acid, aspartic acid, glucaric acid, glutamic acid, itaconic acid, levulinic acid, 3-hydroxybutyrolactone, glycerol, sorbitol, and xylitol/arabinitol. In addition to building blocks, the report outlines the central technical barriers that are preventing the widespread use of biomass for products and chemicals.

  14. Top Value Added Chemicals from Biomass: Volume I -- Results of Screening for Potential Candidates from Sugars and Synthesis Gas

    SciTech Connect (OSTI)

    Werpy, T.; Petersen, G.

    2004-08-01

    This report identifies twelve building block chemicals that can be produced from sugars via biological or chemical conversions. The twelve building blocks can be subsequently converted to a number of high-value bio-based chemicals or materials. Building block chemicals, as considered for this analysis, are molecules with multiple functional groups that possess the potential to be transformed into new families of useful molecules. The twelve sugar-based building blocks are 1,4-diacids (succinic, fumaric and malic), 2,5-furan dicarboxylic acid, 3-hydroxy propionic acid, aspartic acid, glucaric acid, glutamic acid, itaconic acid, levulinic acid, 3-hydroxybutyrolactone, glycerol, sorbitol, and xylitol/arabinitol.

  15. Top Value Added Chemicals from Biomass - Volume I, Results of Screening for Potential Candidates from Sugars and Synthesis Gas

    SciTech Connect (OSTI)

    2004-08-01

    This report identifies twelve building block chemicals that can be produced from sugars via biological or chemical conversions. The twelve building blocks can be subsequently converted to a number of high-value bio-based chemicals or materials. Building block chemicals, as considered for this analysis, are molecules with multiple functional groups that possess the potential to be transformed into new families of useful molecules. The twelve sugar-based building blocks are 1,4-diacids (succinic, fumaric and malic), 2,5-furan dicarboxylic acid, 3-hydroxy propionic acid, aspartic acid, glucaric acid, glutamic acid, itaconic acid, levulinic acid, 3-hydroxybutyrolactone, glycerol, sorbitol, and xylitol/arabinitol.

  16. EA-2001: Energy Efficiency Standards for New Federal Commercial and Multi-Family High-Rise Residential Buildings' Baseline Standards Update (RIN 1904-AD39)

    Office of Energy Efficiency and Renewable Energy (EERE)

    The U.S. Department of Energy (DOE) is publishing this final rule to implement provisions in the Energy Conservation and Production Act (ECPA) that require DOE to update the baseline Federal energy efficiency performance standards for the construction of new Federal commercial and multi-family high-rise residential buildings. This rule updates the baseline Federal commercial standard to the American Society of Heating, Refrigerating, and Air-Conditioning Engineers (ASHRAE) Standard 90.1-2013.

  17. Final Environmental Impact Statement/Environmental Impact Report for continued operation of Lawrence Livermore National Laboratory and Sandia National Laboratories, Livermore. Volume 2, Appendices A--D

    SciTech Connect (OSTI)

    Not Available

    1992-08-01

    This Environmental Impact Statement/Environmental Impact Report (EIS/EIR) is prepared pursuant to the National Environmental Policy Act (NEPA) and the California Environmental Quality Act (CEQA). This document analyzes the potential environmental impacts of the proposed action: continued operation, including near-term (within 5 to 10 years) proposed projects, of Lawrence Livermore National Laboratory (LLNL) and Sandia National Laboratories, Livermore (SNL, Livermore). Additionally, this document analyzes a no action alternative involving continuing operations at FY 1992 funding levels without further growth, a modification of operations alternative to reduce adverse environmental impacts of operations or facilities, and a shutdown and decommissioning alternative of UC discontinuing its management of LLNL after the current contract expires on September 30, 1992. This document assesses the environmental impacts of the Laboratories` operations on air and water quality, geological and ecological systems, occupational and public health risks, prehistoric and historic resources, endangered species, floodplains and wetlands, socioeconomic resources, hazardous waste management, site contamination, and other environmental issues. The EIS/EIR is divided into five volumes and two companion reports. This volume contains the Final EIS/EIR technical appendices which provide technical support for the analyses in Volume 1 and also provide additional information and references.

  18. Total energy cycle assessment of electric and conventional vehicles: an energy and environmental analysis. Volume 2: appendices A-D to technical report

    SciTech Connect (OSTI)

    1998-01-01

    This report compares the energy use, oil use and emissions of electric vehicles (EVs) with those of conventional, gasoline- powered vehicles (CVs) over the total life cycle of the vehicles. The various stages included in the vehicles` life cycles include vehicle manufacture, fuel production, and vehicle operation. Disposal is not included. An inventory of the air emissions associated with each stage of the life cycle is estimated. Water pollutants and solid wastes are reported for individual processes, but no comprehensive inventory is developed. Volume II contains additional details on the vehicle, utility, and materials analyses and discusses several details of the methodology.

  19. Further reduction of efficiency droop effect by adding a lower-index dielectric interlayer in a surface plasmon coupled blue light-emitting diode with surface metal nanoparticles

    SciTech Connect (OSTI)

    Lin, Chun-Han; Su, Chia-Ying; Chen, Chung-Hui; Yao, Yu-Feng; Shih, Pei-Ying; Chen, Horng-Shyang; Hsieh, Chieh; Kiang, Yean-Woei Yang, C. C.; Kuo, Yang

    2014-09-08

    Further reduction of the efficiency droop effect and further enhancements of internal quantum efficiency (IQE) and output intensity of a surface plasmon coupled, blue-emitting light-emitting diode (LED) by inserting a dielectric interlayer (DI) of a lower refractive index between p-GaN and surface Ag nanoparticles are demonstrated. The insertion of a DI leads to a blue shift of the localized surface plasmon (LSP) resonance spectrum and increases the LSP coupling strength at the quantum well emitting wavelength in the blue range. With SiO{sub 2} as the DI, a thinner DI leads to a stronger LSP coupling effect, when compared with the case of a thicker DI. By using GaZnO, which is a dielectric in the optical range and a good conductor under direct-current operation, as the DI, the LSP coupling results in the highest IQE, highest LED output intensity, and weakest droop effect.

  20. Fibers comprised of epitaxially grown single-wall carbon nanotubes, and a method for added catalyst and continuous growth at the tip

    DOE Patents [OSTI]

    Kittrell, W. Carter; Wang, Yuhuang; Kim, Myung Jong; Hauge, Robert H.; Smalley, Richard E.; Marek leg, Irene Morin

    2010-06-01

    The present invention is directed to fibers of epitaxially grown single-wall carbon nanotubes (SWNTs) and methods of making same. Such methods generally comprise the steps of: (a) providing a spun SWNT fiber; (b) cutting the fiber substantially perpendicular to the fiber axis to yield a cut fiber; (c) etching the cut fiber at its end with a plasma to yield an etched cut fiber; (d) depositing metal catalyst on the etched cut fiber end to form a continuous SWNT fiber precursor; and (e) introducing feedstock gases under SWNT growth conditions to grow the continuous SWNT fiber precursor into a continuous SWNT fiber.

  1. Impact of Cranial Irradiation Added to Intrathecal Conditioning in Hematopoietic Cell Transplantation in Adult Acute Myeloid Leukemia With Central Nervous System Involvement

    SciTech Connect (OSTI)

    Mayadev, Jyoti S.; Douglas, James G.; Storer, Barry E.; Appelbaum, Frederick R.; Storb, Rainer

    2011-05-01

    Purpose: Neither the prognostic importance nor the appropriate management of central nervous system (CNS) involvement is known for patients with acute myeloid leukemia (AML) undergoing hematopoietic cell transplantation (HCT). We examined the impact of a CNS irradiation boost to standard intrathecal chemotherapy (ITC). Methods and Materials: From 1995 to 2005, a total of 648 adult AML patients received a myeloablative HCT: 577 patients were CNS negative (CNS-), and 71 were CNS positive (CNS+). Of the 71 CNS+ patients, 52 received intrathecal chemotherapy alone (CNS+ITC), and 19 received ITC plus an irradiation boost (CNS+RT). Results: The CNS-, CNS+ITC, and CNS+RT patients had 1- and 5-year relapse-free survivals (RFS) of 43% and 35%, 15% and 6%, and 37% and 32%, respectively. CNS+ITC patients had a statistically significant worse RFS compared with CNS- patients (hazard ratio [HR], 2.65; 95% confidence interval [CI], 2.0-3.6; p < 0.0001). CNS+RT patients had improved relapse free survival over that of CNS+ITC patients (HR, 0.45; 95% CI, 0.2-0.8; p = 0.01). The 1- and 5-year overall survivals (OS) of patients with CNS-, CNS+ITC, and CNS+RT, were 50% and 38%, 21% and 6%, and 53% and 42%, respectively. The survival of CNS+RT were significantly better than CNS+ITC patients (p = 0.004). After adjusting for known risk factors, CNS+RT patients had a trend toward lower relapse rates and reduced nonrelapse mortality. Conclusions: CNS+ AML is associated with a poor prognosis. The role of a cranial irradiation boost to intrathecal chemotherapy appears to mitigate the risk of CNS disease, and needs to be further investigated to define optimal treatment strategies.

  2. Adding Complex Terrain and Stable Atmospheric Condition Capability to the OpenFOAM-based Flow Solver of the Simulator for On/Offshore Wind Farm Applications (SOWFA): Preprint

    SciTech Connect (OSTI)

    Churchfield, M. J.; Sang, L.; Moriarty, P. J.

    2013-09-01

    This paper describes changes made to NREL's OpenFOAM-based wind plant aerodynamics solver such that it can compute the stably stratified atmospheric boundary layer and flow over terrain. Background about the flow solver, the Simulator for Off/Onshore Wind Farm Applications (SOWFA) is given, followed by details of the stable stratification/complex terrain modifications to SOWFA, along with somepreliminary results calculations of a stable atmospheric boundary layer and flow over a simply set of hills.

  3. Data:A95e1ad6-487b-405e-b22f-cf3724c8c25c | Open Energy Information

    Open Energy Info (EERE)

    under review by our subject matter experts. Jump to: navigation, search Loading... 1. Basic Information 2. Demand 3. Energy << Previous 1 2 3 Next >> Basic Information...

  4. Data:05d6c74a-9073-4ad2-8045-cd52082ca0a4 | Open Energy Information

    Open Energy Info (EERE)

    under review by our subject matter experts. Jump to: navigation, search Loading... 1. Basic Information 2. Demand 3. Energy << Previous 1 2 3 Next >> Basic Information...

  5. Vol 1, Integrated Safety Management System Guide (Volume 1), Chapter IV - Approved on March 28, 2000 and Added to the Guide

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2000-03-28

    This Department of Energy (DOE) Integrated Safety Management System (ISMS) Guide is approved for use by the Office of Environment, Safety and Health (EH) and is available for use by all DOE components and their contractors. This Guide is a consensus document coordinated by EH and prepared under the direction of the DOE Safety Management Implementation Team (SMIT). Canceled by DOE G 450.4-1B.

  6. A novel solar bi-ejector refrigeration system and the performance of the added injector with different structures and operation parameters

    SciTech Connect (OSTI)

    Wang, Fei; Shen, Shengqiang

    2009-12-15

    A novel solar bi-ejector refrigeration system was investigated, whose difference compared to the traditional system is that the circulation pump is replaced by a thermal injector. The new system works more stably and needs less maintenance work than the old one, and the whole system can more fully utilize the solar energy. The mathematical models for calculating the performance of the injector and the whole solar refrigeration system were established. The pressure rise performance of injector under different structure and operation parameters and the performance of solar bi-ejector refrigeration system were studied with R123. The results show that the discharged pressure of injector is affected by structure dimensions of injector and operation conditions. With increasing generation temperature, the entrainment ratio of ejector becomes better while that of injector becomes worse and the overall thermal efficiency of the solar bi-ejector refrigeration system first increases and then decreases with an optimum value of 0.132 at generation temperature of 105 C, condensation temperature of 35 C and evaporation temperature of 10 C. (author)

  7. Binding energy of a holographic deuteron and tritium in anti-de-Sitter space/conformal field theory (AdS/CFT)

    SciTech Connect (OSTI)

    Pahlavani, M. R.; Sadeghi, J.; Morad, R.

    2010-08-15

    In the large 't Hooft coupling limit, the hadronic size of baryon is small and the nucleon-nucleon potential is obtained from massless pseudoscalar exchanges and an infinite tower of spin-one mesons exchanges. In this article we use the holographic nucleon-nucleon interaction and obtain the corresponding potential and binding energy for deuteron and tritium nuclei. The obtained potentials are repulsive at short distances and clearly become zero by increasing the distance as we expected.

  8. Final Environmental Impact Statement

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    EIS - 0097-F c f ` f= �c J m s= Final Environmental Impact Statement BONNEVILLE POWER ADMINISTRATION TRANSMISSION FACILITIES VEGETATION MANAGEMENT PROGRAM U.S. Department of Energy August 1983 Appendices albLbfp= J MMVTJc= Responsible Official: tfiif^j= ^K= s^rde^k= Assistant Secretary for Environmental Protection. Safety, and Emergency Prepafedness Final Environmental Impact Statement BONNEVILLE POWER ADM IN ISTRA TION TRANSMISSION FACILITIES VEGETATION MANAGEMENT PROGRAM U.S. Department of

  9. Mesoporous iron–manganese oxides for sulphur mustard and soman degradation

    SciTech Connect (OSTI)

    Štengl, Václav; J.E. Purkyně University in Ústí nad Labem, Faculty of Environment, 400 96 Ústí nad Labem ; Grygar, Tomáš Matys; J.E. Purkyně University in Ústí nad Labem, Faculty of Environment, 400 96 Ústí nad Labem ; Bludská, Jana; Opluštil, František; Němec, Tomáš

    2012-12-15

    Graphical abstract: Display Omitted Highlights: ► New nanodispersive materials based on Fe and Mn oxides for degradations of warfare agents. ► The best activities for the degradation of sulphur mustard (97.9% in 64 min) and soman (97.9% in 64 min). ► One pot synthesis with friendly transformed to industrial conditions. -- Abstract: Substituted iron(III)–manganese(III, IV) oxides, ammonio-jarosite and birnessite, were prepared by a homogeneous hydrolysis of potassium permanganate and iron(III) sulphate with 2-chloroacetamide and urea, respectively. Synthesised oxides were characterised using Brunauer–Emmett–Teller (BET) surface area and Barrett–Joiner–Halenda porosity (BJH), X-ray diffraction (XRD), infrared spectroscopy (IR), Raman spectroscopy and scanning electron microscopy (SEM). The oxides were taken for an experimental evaluation of their reactivity against sulphur mustard (HD) and soman (GD). When ammonio-jarosite formation is suppressed by adding urea to the reaction mixture, the reaction products are mixtures of goethite, schwertmannite and ferrihydrite, and their degradation activity against soman considerably increases. The best activities for the degradation of sulphur mustard (97.9% in 64 min) and soman (97.9% in 64 min) were observed for FeMn{sub 7}5 with 32.6 wt.% Fe (36.8 wt.% Mn) and FeMn{sub 3}7U with 60.8 wt.% Fe (10.1 wt.% Mn) samples, respectively.

  10. 2015 BIA Providers Conference Energy Track

    Broader source: Energy.gov (indexed) [DOE]

    ... Energy Authority (15 min) Alaska Housing Finance Corporation (15 min) Tanana Chiefs Conference (15 min) Renewable Energy Alaska Project (15 min) Q&A Panel (15 min) 3:15 - 5:00 p.m. ...

  11. Method of enhancing cyclotron beam intensity

    DOE Patents [OSTI]

    Hudson, Ed D.; Mallory, Merrit L.

    1977-01-01

    When an easily ionized support gas such as xenon is added to the cold cathode in sources of the Oak Ridge Isochronous Cyclotron, large beam enhancements are produced. For example, .sup.20 Ne.sup.7+ is increased from 0.05 enA to 27 enA, and .sup.16 O.sup.5+ intensities in excess of 35 e.mu.A have been extracted for periods up to 30 minutes. Approximately 0.15 cc/min of the easily ionized support gas is supplied to the ion source through a separate gas feed line and the primary gas flow is reduced by about 30%.

  12. New electrolyte systems for capillary zone electrophoresis of metal cations and non-ionic organic compounds

    SciTech Connect (OSTI)

    Shi, Y.

    1995-06-19

    Excellent separations of metal ions can be obtained very quickly by capillary electrophoresis provided a weak complexing reagent is incorporated into the electrolyte to alter the effective mobilities of the sample ions. Indirect photometric detection is possible by also adding a UV-sensitive ion to the electrolyte. Separations are described using phthalate, tartrate, lactate or hydroxyisobutyrate as the complexing reagent. A separation of twenty-seven metal ions was achieved in only 6 min using a lactate system. A mechanism for the separation of lanthanides is proposed for the hydroxyisobutyrate system.

  13. Transparent conducting Al-doped ZnO thin films prepared by magnetron sputtering with dc and rf powers applied in combination

    SciTech Connect (OSTI)

    Minami, Tadatsugu; Ohtani, Yuusuke; Miyata, Toshihiro; Kuboi, Takeshi

    2007-07-15

    A newly developed Al-doped ZnO (AZO) thin-film magnetron-sputtering deposition technique that decreases resistivity, improves resistivity distribution, and produces high-rate depositions has been demonstrated by dc magnetron-sputtering depositions that incorporate rf power (dc+rf-MS), either with or without the introduction of H{sub 2} gas into the deposition chamber. The dc+rf-MS preparations were carried out in a pure Ar or an Ar+H{sub 2} (0%-2%) gas atmosphere at a pressure of 0.4 Pa by adding a rf component (13.56 MHz) to a constant dc power of 80 W. The deposition rate in a dc+rf-MS deposition incorporating a rf power of 150 W was approximately 62 nm/min, an increase from the approximately 35 nm/min observed in dc magnetron sputtering with a dc power of 80 W. A resistivity as low as 3x10{sup -4} {omega} cm and an improved resistivity distribution could be obtained in AZO thin films deposited on substrates at a low temperature of 150 deg. C by dc+rf-MS with the introduction of hydrogen gas with a content of 1.5%. This article describes the effects of adding a rf power component (i.e., dc+rf-MS deposition) as well as introducing H{sub 2} gas into dc magnetron-sputtering preparations of transparent conducting AZO thin films.

  14. Evaluation of potential severe accidents during low power and shutdown operations at Surry, Unit 1: Analysis of core damage frequency from internal events during mid-loop operations, Appendices A--D. Volume 2, Part 2

    SciTech Connect (OSTI)

    Chu, T.L.; Musicki, Z.; Kohut, P.

    1994-06-01

    During 1989, the Nuclear Regulatory Commission (NRC) initiated an extensive program to carefully examine the Potential risks during low Power and shutdown operations. The program includes two parallel projects being performed by Brookhaven National Laboratory (BNL) and Sandia National Laboratories (SNL). Two plants, Surry (pressurized water reactor) and Grand Gulf (boiling water reactor), were selected as the Plants to be studied. The objectives of the program are to assess the risks of severe accidents initiated during plant operational states other than full power operation and to compare the estimated core damage frequencies, important accident sequences and other qualitative and quantitative results with those accidents initiated during full power operation as assessed in NUREG-1150. The objective of this report is to document the approach utilized in the Surry plant and discuss the results obtained. A parallel report for the Grand Gulf plant is prepared by SNL. This study shows that the core-damage frequency during mid-loop operation at the Surry plant is comparable to that of power operation. We recognize that there is very large uncertainty in the human error probabilities in this study. This study identified that only a few procedures are available for mitigating accidents that may occur during shutdown. Procedures written specifically for shutdown accidents would be useful. This document, Volume 2, Pt. 2 provides appendices A through D of this report.

  15. Specific uptake, dissociation, and degradation of /sup 125/I-labeled insulin in isolated turtle (Chrysemys dorbigni) thyroid glands

    SciTech Connect (OSTI)

    Marques, M.; da Silva, R.S.; Turyn, D.; Dellacha, J.M.

    1985-11-01

    Thyroid glands from turtles (Chrysemys dorbigni) pretreated with potassium iodide were incubated with /sup 125/I-insulin in the presence or absence of unlabeled insulin, in order to study its specific uptake. At 24 degrees, the specific uptake reached a plateau at 180 min of incubation. The dose of bovine insulin that inhibited 50% of the /sup 125/I-insulin uptake was 2 micrograms/ml of incubation medium. Most of the radioactive material (71%) extracted from the gland, after 30 min incubation with /sup 125/I-insulin, eluted in the same position as labeled insulin on Sephadex G-50. Only 24% eluted in the salt position. After 240 min incubation, increased amount of radioactivity appeared in the Na/sup 125/I position. When bovine insulin was added together with the labeled hormone, a substantial reduction of radioactivity was observed in the insulin and Na/sup 125/I elution positions. Dissociation studies were performed at 6 degrees in glands preincubated with /sup 125/I-insulin either at 24 or 6 degrees. The percentage of trichloroacetic acid (TCA)-soluble radioactive material in the dissociation medium increased with incubation time at both temperatures. However, the degradation activity was lower at 6 than at 24 degrees. The addition of bovine insulin to the incubation buffer containing /sup 125/I-insulin reduced the radioactive degradation products in the dissociated medium. Chloroquine or bacitracin inhibited the degradation activity. Incubation of thyroid glands with /sup 125/I-hGH or /sup 125/I-BSA showed values of uptake, dissociation, and degradation similar to those experiments in which an excess of bovine insulin was added together with the labeled hormone. Thus, by multiple criteria, such as specific uptake, dissociation, and degradation, the presence of insulin-binding sites in the turtle thyroid gland may be suggested.

  16. Reciprocating Engines in Support of Grid Modernization

    Broader source: Energy.gov (indexed) [DOE]

    Non-Spin Reserves >500kW, 10 min to ramp, 30 min commitment Yes Ramping Reserves Award based on 5-min ramp capability Yes Demand Response >500kW, full capacity in 40 min, duration ...

  17. Minocycline and doxycycline, but not other tetracycline-derived compounds, protect liver cells from chemical hypoxia and ischemia/reperfusion injury by inhibition of the mitochondrial calcium uniporter

    SciTech Connect (OSTI)

    Schwartz, Justin; Holmuhamedov, Ekhson; Zhang, Xun; Lovelace, Gregory L.; Smith, Charles D.; Lemasters, John J.

    2013-11-15

    Minocycline, a tetracycline-derived compound, mitigates damage caused by ischemia/reperfusion (I/R) injury. Here, 19 tetracycline-derived compounds were screened in comparison to minocycline for their ability to protect hepatocytes against damage from chemical hypoxia and I/R injury. Cultured rat hepatocytes were incubated with 50 μM of each tetracycline-derived compound 20 min prior to exposure to 500 μM iodoacetic acid plus 1 mM KCN (chemical hypoxia). In other experiments, hepatocytes were incubated in anoxic Krebs–Ringer–HEPES buffer at pH 6.2 for 4 h prior to reoxygenation at pH 7.4 (simulated I/R). Tetracycline-derived compounds were added 20 min prior to reperfusion. Ca{sup 2+} uptake was measured in isolated rat liver mitochondria incubated with Fluo-5N. Cell killing after 120 min of chemical hypoxia measured by propidium iodide (PI) fluorometry was 87%, which decreased to 28% and 42% with minocycline and doxycycline, respectively. After I/R, cell killing at 120 min decreased from 79% with vehicle to 43% and 49% with minocycline and doxycycline. No other tested compound decreased killing. Minocycline and doxycycline also inhibited mitochondrial Ca{sup 2+} uptake and suppressed the Ca{sup 2+}-induced mitochondrial permeability transition (MPT), the penultimate cause of cell death in reperfusion injury. Ru360, a specific inhibitor of the mitochondrial calcium uniporter (MCU), also decreased cell killing after hypoxia and I/R and blocked mitochondrial Ca{sup 2+} uptake and the MPT. Other proposed mechanisms, including mitochondrial depolarization and matrix metalloprotease inhibition, could not account for cytoprotection. Taken together, these results indicate that minocycline and doxycycline are cytoprotective by way of inhibition of MCU. - Highlights: • Minocycline and doxycycline are the only cytoprotective tetracyclines of those tested • Cytoprotective tetracyclines inhibit the MPT and mitochondrial calcium and iron uptake. • Cytoprotective

  18. Experimental study on the thorium-loaded accelerator-driven system at the Kyoto Univ. critical assembly

    SciTech Connect (OSTI)

    Pyeon, C. H.; Yagi, T.; Lim, J. Y.; Misawa, T.

    2012-07-01

    The experimental study on the thorium-loaded accelerator-driven system (ADS) is conducted in the Kyoto Univ. Critical Assembly (KUCA). The experiments are carried out in both the critical and subcritical states for attaining the reaction rates of the thorium capture and fission reactions. In the critical system, the thorium plate irradiation experiment is carried out for the thorium capture and fission reactions. From the results of the measurements, the thorium fission reactions are obtained apparently in the critical system, and the C/E values of reaction rates show the accuracy of relative difference of about 30%. In the ADS experiments with 14 MeV neutrons and 100 MeV protons, the subcritical experiments are carried out in the thorium-loaded cores to obtain the capture reaction rates through the measurements of {sup 115}In(n, {gamma}){sup 116m}In reactions. The results of the experiments reveal the difference between the reaction rate distributions for the change in not only the neutron spectrum but also the external neutron source. The comparison between the measured and calculated reaction rate distributions demonstrates a discrepancy of the accuracy of reaction rate analyses of thorium capture reactions through the thorium-loaded ADS experiments with 14 MeV neutrons. Hereafter, kinetic experiments are planned to be carried out to deduce the delayed neutron decay constants and subcriticality using the pulsed neutron method. (authors)

  19. Catalytic dehydrohalogenation and hydrogenation using H{sub 2} and palladium as a method for the removal of tetrachloroethylene from water

    SciTech Connect (OSTI)

    Schreier, C.G.; Reinhard, M.

    1995-12-01

    The reduction of tetrachloroethylene to ethane in water by hydrogen and supported palladium was rapid at room temperature even at the low hydrogen partial pressure of 0.1 atm. The rate constant for reaction of PCE with 0.05g of 1% Pd on polyethylenimine coated beads was 0.034min{sup -1}. Ethane and ethene production were concomitant with ethane accounting for 65% of the initial PCE and ethene about 2%. When the support was alumina pellets, granular carbon, or activated carbon powder, PCE disappeared within 10 minutes and rate data could not obtained. Ethane was produced in these systems with yields of 65-80% while ethene was a reactive intermediate whose maximum amount was about 5% of the initial PCE. Particle size was important when using a carbon support. If hydrogen was added after PCE sorption onto the activated carbon powder, the amount of ethane formed was the same as when hydrogen was added initially. However, when hydrogen was added after PCE sorption onto granular carbon, less than 10% of the PCE could be accounted for as ethane.

  20. Selective hydrothermal synthesis of BiOBr microflowers and Bi{sub 2}O{sub 3} shuttles with concave surfaces

    SciTech Connect (OSTI)

    Xiao Peipei; Zhu Lingling; Zhu Yongchun; Qian Yitai

    2011-06-15

    Through controlling the amount of NaOH added, BiOBr and Bi{sub 2}O{sub 3} with different shapes were hydrothermally synthesized in the reaction system of Bi(NO{sub 3}){sub 3}-hexadecyl trimethyl ammonium bromide (CTAB)-NaOH. As 8 mmol of NaOH was added, BiOBr microflowers constructed of nanoflakes were synthesized. The thickness of these single-crystal nanoflakes was about 20 nm. In the similar condition, when the amount of NaOH added was 28 mmol, Bi{sub 2}O{sub 3} shuttles with concave surfaces were obtained. The length of these shuttles was 100 {mu}m and the diameter at the middle of these shuttles was 50 {mu}m. The photocatalytic activity of as-prepared BiOBr microflowers was evaluated by the degradation of methyl orange (MO) under visible-light irradiation ({lambda}>420 nm), which was up to 96% within 90 min. - Graphical abstract: Through controlling the amount of NaOH added, BiOBr microflowers and Bi{sub 2}O{sub 3} shuttles with concave surfaces were hydrothermally synthesized in the reaction system of Bi(NO{sub 3}){sub 3}-hexadecyl trimethyl ammonium bromide (CTAB)-NaOH. Highlights: > BiOBr microflowers constructed of nanoflakes were synthesized hydrothermally. > Bi{sub 2}O{sub 3} shuttles with concave surfaces were also synthesized. > Their formation mechanisms were studied based on the experimental results. > The photocatalytic activity of BiOBr microflowers was evaluated under visible-light irradiation.

  1. Sources | National Nuclear Security Administration | (NNSA)

    National Nuclear Security Administration (NNSA)

    Feed aggregator Sources usajobs for U.S. Citizens Courier 2 hours 21 min old Director, Information Technology Management Division 2 hours 21 min old Supervisory General Engineer/Physical Scientist 2 hours 21 min old General Engineer/Physical Scientist 8 hours 22 min old More usajobs for Federal Employees Foreign Affairs Specialist 2 hours 22 min old Supervisory Emergency Management Specialist 2 hours 22 min old Director, Information Technology Management Division 2 hours 22 min old Civil

  2. International Hydrogen Infrastructure Challenges Workshop Summary

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Webinar: International Hydrogen Infrastructure Challenges Workshop Summary - NOW, NEDO and DOE December 16th 2013 1 Partner: Timetable * Introduction to the Webinar (2 min) Erika Sutherland * Remarks (10 min) Sunita Satyapal, Klaus Bonhoff, Eiji Ohira * Speaker Introduction (3 min) Erika Sutherland * General country overview (15 min) Hanno Butsch * H2-Fueling (15 min) Jesse Schneider * H2 Quality (15 min) Jesse Schneider on behalf of Georgios Tsotridis * H2-Metering (15 min) Tetsuji Nakamura *

  3. Tin-silver-bismuth solders for electronics assembly

    DOE Patents [OSTI]

    Vianco, P.T.; Rejent, J.A.

    1995-08-08

    A lead-free solder alloy is disclosed for electronic assemblies composed of a eutectic alloy of tin and silver with a bismuth addition, x, of 0added to the eutectic tin-silver alloy as determined by DSC analysis, 10 C/min. A preferred alloy composition is 91.84Sn-3.33Ag-4.83Bi (weight percent based on total alloy weight). 4 figs.

  4. Tin-silver-bismuth solders for electronics assembly

    DOE Patents [OSTI]

    Vianco, Paul T.; Rejent, Jerome A.

    1995-01-01

    A lead-free solder alloy for electronic assemblies composed of a eutectic alloy of tin and silver with a bismuth addition, x, of 0added to the eutectic tin-silver alloy as determined by DSC analysis, 10.degree. C./min. A preferred alloy composition is 91.84Sn-3.33Ag-4.83Bi (weight percent based on total alloy weight).

  5. EXTRACTION OF URANIUM

    DOE Patents [OSTI]

    Kesler, R.D.; Rabb, D.D.

    1959-07-28

    An improved process is presented for recovering uranium from a carnotite ore. In the improved process U/sub 2/O/sub 5/ is added to the comminuted ore along with the usual amount of NaCl prior to roasting. The amount of U/sub 2/O/ sub 5/ is dependent on the amount of free calcium oxide and the uranium in the ore. Specifically, the desirable amount of U/sub 2/O/sub 5/ is 3.2% for each 1% of CaO, and 5 to 6% for each 1% of uranium. The mixture is roasted at about 1560 deg C for about 30 min and then leached with a 3 to 9% aqueous solution of sodium carbonate.

  6. Slide 1

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    New synthetic strategy for porous molecular materials towards gas separation Center for Gas Separations Relevant to Clean Energy Technologies Li & Zhou, Nat. Chem. 2010, 2, 893 PMOP-1 Breakthrough curve Mixture gas (CO 2 : N 2 = 10:90v%) : 10 sccm Time (min) 0 1 2 3 4 C/Co 0.0 0.2 0.4 0.6 0.8 1.0 Carbon dioxide Nitrogen Breakthrough of CO 2 -N 2 (1:9) 0 100 200 300 400 500 600 700 0 20 40 60 80 100 V ads (cm 3 /g, STP) P /mmHg N 2 H 2 O 2 Ar 0 100 200 300 400 500 600 700 0 10 20 30 40 50 60

  7. Thermal reactivity of mixtures of VDDT lubricant and simulated Hanford Tank 241-SY-101 waste

    SciTech Connect (OSTI)

    Scheele, R.D.; Panisko, F.E.; Sell, R.L.

    1996-09-01

    To predict whether the Polywater G lubricant residue remaining in the velocity, density, and temperature tree (VDTT) and the waste in Tank 241-SY-101 (101SY) will be chemically compatible with wastes in 101SY when two VDTTs are removed from 101SY, the Pacific Northwest National Laboratory measured the thermal reaction sensitivity of the lubricant residue. This residue is a simulated 101SY waste containing the organic surrogate trisodium hydroxyethyl-ethylenediaminetriacetate (Na{sub 3}HEDTA) and two simulated potential waste and lubricant residue mixtures containing 10 and 90 percent lubricant residue. These studies using accelerating rate calorimetry found that the residue did not react at a rate exceeding 0.1 J/min/g mixture up to 190 degrees C with simulated 101SY waste containing Na{sub 3}HEDTA as the organic surrogate. Also, the dried lubricant residue did not decompose exothermically at a rate exceeding 0.1 J/min/g. Using guidelines used by the chemical industry, these results indicate that the lubricant residue should not react as a significant rate with the waste in 101SY when added to the waste at 60 degrees C or when the mixture cools to the waste`s temperature of 48 degrees C.

  8. A New F-18 Labeled PET Agent For Imaging Alzheimer's Plaques

    SciTech Connect (OSTI)

    Kulkarni, Padmakar V.; Hao Guiyang; Arora, Veera; Long, Michael; Slavine, Nikolai; Chiguru, Srinivas; Qu Baoxi; Sun Xiankai; Bennett, Michael; Antich, Peter P.; Bonte, Frederick J.; Vasdev, Neil

    2011-06-01

    Amyloid plaques and neurofibrillary tangles are hallmarks of Alzheimer's disease (AD). Advances in development of imaging agents have focused on targeting amyloid plaques. Notable success has been the development of C-11 labeled PIB (Pittsburgh Compound) and a number of studies have demonstrated the utility of this agent. However, the short half life of C-11 (t1/2: 20 min), is a limitation, thus has prompted the development of F-18 labeled agents. Most of these agents are derivatives of amyloid binding dyes; Congo red and Thioflavin. Some of these agents are in clinical trials with encouraging results. We have been exploring new class of agents based on 8-hydroxy quinoline, a weak metal chelator, targeting elevated levels of metals in plaques. Iodine-123 labeled clioquinol showed affinity for amyloid plaques however, it had limited brain uptake and was not successful in imaging in intact animals and humans. We have been successful in synthesizing F-18 labeled 8-hydroxy quinoline. Small animal PET/CT imaging studies with this agent showed high (7-10% ID/g), rapid brain uptake and fast washout of the agent from normal mice brains and delayed washout from transgenic Alzheimer's mice. These promising results encouraged us in further evaluation of this class of compounds for imaging AD plaques.

  9. DISCLAIMER : UNCONTROLLED WHEN PRINTED - PLEASE CHECK THE STATUS...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    IODGCOOTEDHCD Document Security: Internal Use RO: Henderson Mark Read Access LG: EC, GG: IO DDGs (and Senior Advisors), AD: ITER, AD: External Collaborators, AD: IODirector- ...

  10. Search for: All records | Data Explorer

    Office of Scientific and Technical Information (OSTI)

    ARM: Temperature Profiles from Raman Lidar at 10-min averaging interval Chitra Sivaraman ; Connor Flynn Temperature Profiles from Raman Lidar at 10-min averaging interval View ...

  11. Browse by Discipline -- E-print Network Subject Pathways: Materials...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... Technology, Monash University Kan, Min-Yen (Min-Yen Kan) - Department of Computational Science, National University of Singapore Kanade, Aditya (Aditya Kanade) - Department of ...

  12. DOE Research and Development Accomplishments Database Browse

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Database Browse Sorted by: Most Recently Added Sort List By: -------------------- Most Recently Added Title Author Publication Date

  13. Assessing methane oxidation under landfill covers and its contribution to the above atmospheric CO{sub 2} levels: The added value of the isotope ({delta}{sup 13}C and {delta}{sup 18}O CO{sub 2}; {delta}{sup 13}C and {delta}D CH{sub 4}) approach

    SciTech Connect (OSTI)

    Widory, D.; Proust, E.; Bellenfant, G.; Bour, O.

    2012-09-15

    Highlights: Black-Right-Pointing-Pointer Comparison of the isotope and mass balance approaches to evaluate the level of methane oxidation within a landfill. Black-Right-Pointing-Pointer The level of methane oxidation is not homogenous under the landfill cover and is strongly correlated to the methane flux. Black-Right-Pointing-Pointer Isotope tracking of the contribution of the methane oxidation to the CO{sub 2} concentrations in the ambient air. - Abstract: We are presenting here a multi-isotope approach ({delta}{sup 13}C and {delta}{sup 18}O of CO{sub 2}; {delta}{sup 13}C and {delta}D of CH{sub 4}) to assess (i) the level(s) of methane oxidation during waste biodegradation and its migration through a landfill cover in Sonzay (France), and (ii) its contribution to the atmospheric CO{sub 2} levels above the surface. The isotope approach is compared to the more conventional mass balance approach. Results from the two techniques are comparable and show that the CH{sub 4} oxidation under the landfill cover is heterogenous, with low oxidation percentages in samples showing high biogas fluxes, which was expected in clay covers presenting fissures, through which CH{sub 4} is rapidly transported. At shallow depth, more immobile biogas pockets show a higher level of CH{sub 4} oxidation by the methanotrophic bacteria. {delta}{sup 13}C of CO{sub 2} samples taken at different heights (from below the cover up to 8 m above the ground level) were also used to identify and assess the relative contributions of its main sources both under the landfill cover and in the surrounding atmosphere.

  14. test1 | National Nuclear Security Administration | (NNSA)

    National Nuclear Security Administration (NNSA)

    test1 Subscribe to test1 feed URL: https://nnsa.energy.gov/ Updated: 3 min

  15. Development and Evaluation of an Externally Air-Cooled Low-Flow torch and the Attenuation of Space Charge and Matrix Effects in Inductively Coupled Plasma Mass Spectrometry

    SciTech Connect (OSTI)

    Praphairaksit, N.

    2000-09-12

    An externally air-cooled low-flow torch has been constructed and successfully demonstrated for applications in inductively coupled plasma mass spectrometry (ICP-MS). The torch is cooled by pressurized air flowing at {approximately}70 L/min through a quartz air jacket onto the exterior of the outer tube. The outer gas flow rate and operating RF forward power are reduced considerably. Although plasmas can be sustained at the operating power as low as 400 W with a 2 L/min of outer gas flow, somewhat higher power and outer gas flows are advisable. A stable and analytical useful plasma can be obtained at 850 W with an outer gas flow rate of {approximately}4 L/min. Under these conditions, the air-cooled plasma produces comparable sensitivities, doubly charged ion ratios, matrix effects and other analytical merits as those produced by a conventional torch while using significantly less argon and power requirements. Metal oxide ion ratios are slightly higher with the air-cooled plasma but can be mitigated by reducing the aerosol gas flow rate slightly with only minor sacrifice in analyte sensitivity. A methodology to alleviate the space charge and matrix effects in ICP-MS has been developed. A supplemental electron source adapted from a conventional electron impact ionizer is added to the base of the skimmer. Electrons supplied from this source downstream of the skimmer with suitable amount and energy can neutralize the positive ions in the beam extracted from the plasma and diminish the space charge repulsion between them. As a result, the overall ion transmission efficiency and consequent analyte ion sensitivities are significantly improved while other important analytical aspects, such as metal oxide ion ratio, doubly charged ion ratio and background ions remain relatively unchanged with the operation of this electron source. This technique not only improves the ion transmission efficiency but also minimizes the matrix effects drastically. The matrix-induced suppression

  16. J F M A M J J A S O N D

    U.S. Energy Information Administration (EIA) Indexed Site

    6 Cents per Gallon Excluding Taxes P AD Distric t I P AD Distric t II P AD Distric t III P AD Distric t IV P AD Distric t V 6. U.S. No. 2 Distillate Prices to Residences by PAD...

  17. J F M A M J J A S O N D

    U.S. Energy Information Administration (EIA) Indexed Site

    7 Cents per Gallon Excluding Taxes P AD Distric t I P AD Distric t II P AD Distric t III P AD Distric t IV P AD Distric t V 6. U.S. No. 2 Distillate Prices to Residences by PAD...

  18. Image processing applied to laser cladding process

    SciTech Connect (OSTI)

    Meriaudeau, F.; Truchetet, F.

    1996-12-31

    The laser cladding process, which consists of adding a melt powder to a substrate in order to improve or change the behavior of the material against corrosion, fatigue and so on, involves a lot of parameters. In order to perform good tracks some parameters need to be controlled during the process. The authors present here a low cost performance system using two CCD matrix cameras. One camera provides surface temperature measurements while the other gives information relative to the powder distribution or geometric characteristics of the tracks. The surface temperature (thanks to Beer Lambert`s law) enables one to detect variations in the mass feed rate. Using such a system the authors are able to detect fluctuation of 2 to 3g/min in the mass flow rate. The other camera gives them information related to the powder distribution, a simple algorithm applied to the data acquired from the CCD matrix camera allows them to see very weak fluctuations within both gaz flux (carriage or protection gaz). During the process, this camera is also used to perform geometric measurements. The height and the width of the track are obtained in real time and enable the operator to find information related to the process parameters such as the speed processing, the mass flow rate. The authors display the result provided by their system in order to enhance the efficiency of the laser cladding process. The conclusion is dedicated to a summary of the presented works and the expectations for the future.

  19. Gas chromatographic determination of residual solvents in lubricating oils and waxes

    SciTech Connect (OSTI)

    De Andrade Bruening, I.M.R.

    1983-10-01

    A direct gas-liquid chromatographic analysis of residual solvents is described, using tert-butylbenzene as an internal standard. The lube oils and waxes were prevented from contaminating the chromatographic column by injecting the samples directly into a precolumn containing a silicone stationary phase. The samples of lube oils and waxes were injected directly into the chromatographic column containing another stationary phase, 1,2,3-tris(2-cyanoethoxy)propane. (The waxy samples were dissolved in a light neutral oil). With proper operating conditions, analysis time was 7 min. The procedure has been applied in the control of a lube oil dewaxing plant; the chromatographic column showed no sign of deterioration after 1 h when the precolumn was removed. Known amounts of toluene and methylethyl ketone were added to the solvent-free lubricating oils and wax, and these mixtures were analyzed to evaluate the accuracy of the procedure. Precision and accuracy of these data are comparable to those of methods previously described. 1 figure, 1 table.

  20. Enhancement of Ca(OH){sub 2}/fly ash sorbent for the dry-desulfurization process

    SciTech Connect (OSTI)

    Mitsuo Yamamoto; Satoshi Komaki; Daichi Nakajima; Norihiko Matsushima; Dan Liu; Masateru Nishioka; Masayoshi Sadakata

    2006-10-15

    Ca(OH){sub 2}/fly ash sorbent has been studied as an effective method for SO{sub 2} removal. The effect of iron and other species for enhancing the ability of Ca(OH){sub 2}/fly ash sorbent was investigated in this study. At first, Fe(NO{sub 3}){sub 3} was added in the preparation of the sorbent, and TG analysis was carried out. The Ca utilization rate over a period of 90 min was about 10% greater than that for Ca(OH){sub 2}/fly ash sorbent. However, it was found that iron is not effective for enhancing the ability of Ca(OH){sub 2}/fly ash sorbent but that NO{sub 3}{sup -} was the most effective factor to enhance it. The mechanism of enhancing the Ca utilization rate was also investigated, and it was found that Ca(NO{sub 3})2 was produced in the sorbent and reacted with SO{sub 2}, so that the reaction Ca(NO{sub 3}){sub 2} + SO{sub 2} {yields} CaSO{sub 4} + 2NO + O{sub 2} proceeded. 12 refs., 6 figs., 3 tabs.

  1. Synthesis and characterization of Cr-doped ZnO nanorod-array photocatalysts with improved activity

    SciTech Connect (OSTI)

    Chang, Chi-Jung Yang, Tsung-Lin; Weng, Yu-Ching

    2014-06-01

    Immobilized photocatalysts with high catalytic activity under UV light were prepared by growing Cr-doped ZnO nanorods on glass substrates by a hydrothermal method. The effects of Cr dopant on the surface texture, crystallinity, surface chemistry, and photoinduced charge separation and their relation with the photocatalytic degradation of Cr-doped ZnO were investigated by scanning electron microscopy, diffuse reflectance spectra, photoelectrochemical scanning electrochemical microscopy, and X-ray photoemission spectroscopy. Adding the appropriate amount of Cr dopant is a powerful way to enhance the separation of charge carriers in ZnO photocatalyst. The photocatalytic activity was improved due to the increase in surface oxygen vacancies, the separation of charge carriers, modification of the band gap, and the large surface area of the doped ZnO nanorod photocatalyst. - Graphical abstract: Photoinduced charge separation and its relation with the photocatalytic degradation activity of Cr-doped ZnO were investigated by photoelectrochemical scanning electrochemical microscopy. - Highlights: Cr dopant enhances separation of charge carries in ZnO nanorod photocatalyst. Photoinduced charge carries separation monitored by PEC-SECM. The higher the photocurrent is, the higher the photocatalytic activity is. Degradation of DB86 dye solutions under visible light finished within 50 min. Higher activity due to more oxygen vacancy, tuned band gap and more surface area.

  2. Catalytic activity of oxidized (combusted) oil shale for removal of nitrogen oxides with ammonia as a reductant in combustion gas streams, Part 2

    SciTech Connect (OSTI)

    Reynolds, J.G.; Taylor, R.W.; Morris, C.J.

    1993-01-04

    Oxidized oil shale from the combustor in the LLNL Hot-Recycled-Solids (HRS) oil shale retorting process has been found to be a catalyst for removing nitrogen oxides from laboratory gas streams using NH[sub 3] as a reductant. Oxidized Green River oil shale heated at 10[degree]C/min in an Ar/O[sub 2]/NO/NH[sub 3] mixture ([approximately]93%/6%/2000 ppM/4000 ppM) with a gas residence time of [approximately]0.6 sec removed NO between 250 and 500[degree]C, with maximum removal of 70% at [approximately]400[degree]C. Under isothermal conditions with the same gas mixture, the maximum NO removal was [approximately]64%. When CO[sub 2] was added to the gas mixture at [approximately]8%, the NO removal dropped to [approximately]50%. However, increasing the gas residence time to [approximately]1.2 sec, increased NO removal to 63%. Nitrogen balances of these experiments suggest selective catalytic reduction of NO is occurring using NH[sub 3] as the reductant. These results are not based on completely optimized process conditions, but indicate oxidized oil shale is an effective catalyst for NO removal from combustion gas streams using NH[sub 3] as the reductant. Parameters calculated for implementing oxidized oil shale for NO[sub x] remediation on the current HRS retort indicate an abatement device is practical to construct.

  3. Catalytic activity of oxidized (combusted) oil shale for removal of nitrogen oxides with ammonia as a reductant in combustion gas streams, Part 2

    SciTech Connect (OSTI)

    Reynolds, J.G.; Taylor, R.W.; Morris, C.J.

    1993-01-04

    Oxidized oil shale from the combustor in the LLNL Hot-Recycled-Solids (HRS) oil shale retorting process has been found to be a catalyst for removing nitrogen oxides from laboratory gas streams using NH{sub 3} as a reductant. Oxidized Green River oil shale heated at 10{degree}C/min in an Ar/O{sub 2}/NO/NH{sub 3} mixture ({approximately}93%/6%/2000 ppM/4000 ppM) with a gas residence time of {approximately}0.6 sec removed NO between 250 and 500{degree}C, with maximum removal of 70% at {approximately}400{degree}C. Under isothermal conditions with the same gas mixture, the maximum NO removal was {approximately}64%. When CO{sub 2} was added to the gas mixture at {approximately}8%, the NO removal dropped to {approximately}50%. However, increasing the gas residence time to {approximately}1.2 sec, increased NO removal to 63%. Nitrogen balances of these experiments suggest selective catalytic reduction of NO is occurring using NH{sub 3} as the reductant. These results are not based on completely optimized process conditions, but indicate oxidized oil shale is an effective catalyst for NO removal from combustion gas streams using NH{sub 3} as the reductant. Parameters calculated for implementing oxidized oil shale for NO{sub x} remediation on the current HRS retort indicate an abatement device is practical to construct.

  4. Catalytic activity of oxidized (combusted) oil shale for removal of nitrogen oxides with ammonia as a reductant in combustion gas streams, Part 1

    SciTech Connect (OSTI)

    Reynolds, J.G.; Taylor, R.W.; Morris, C.J.

    1992-06-10

    Oxidized oil shale from the combustor in the LLNL hot recycle solids oil shale retorting process has been studied as a catalyst for removing nitrogen oxides from laboratory gas streams using NH{sub 3} as areductant. Combusted Green River oil shale heated at 10{degrees}C/min in an Ar/O{sub 2}/NO/NH{sub 3} mixture ({approximately}93%/6%/2000 ppm/4000 ppm) with a gas residence time of {approximately}0.6 sec exhibited NO removal between 250 and 500{degrees}C, with maximum removal of 70% at {approximately}400{degrees}C. Under isothermal conditions with the same gas mixture, the maximum NO removal was found to be {approximately}64%. When CO{sub 2} was added to the gas mixture at {approximately}8%, the NO removal dropped to {approximately}50%. However, increasing the gas residence time to {approximately}1.2 sec, increased NO removal to 63%. These results are not based on optimized process conditions, but indicate oxidized (combusted) oil shale is an effective catalyst for NO removal from combustion gas streams using NH{sub 3} as the reductant.

  5. Cloud Properties and Radiative Heating Rates for TWP

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Comstock, Jennifer

    A cloud properties and radiative heating rates dataset is presented where cloud properties retrieved using lidar and radar observations are input into a radiative transfer model to compute radiative fluxes and heating rates at three ARM sites located in the Tropical Western Pacific (TWP) region. The cloud properties retrieval is a conditional retrieval that applies various retrieval techniques depending on the available data, that is if lidar, radar or both instruments detect cloud. This Combined Remote Sensor Retrieval Algorithm (CombRet) produces vertical profiles of liquid or ice water content (LWC or IWC), droplet effective radius (re), ice crystal generalized effective size (Dge), cloud phase, and cloud boundaries. The algorithm was compared with 3 other independent algorithms to help estimate the uncertainty in the cloud properties, fluxes, and heating rates (Comstock et al. 2013). The dataset is provided at 2 min temporal and 90 m vertical resolution. The current dataset is applied to time periods when the MMCR (Millimeter Cloud Radar) version of the ARSCL (Active Remotely-Sensed Cloud Locations) Value Added Product (VAP) is available. The MERGESONDE VAP is utilized where temperature and humidity profiles are required. Future additions to this dataset will utilize the new KAZR instrument and its associated VAPs.

  6. Cloud Properties and Radiative Heating Rates for TWP

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Comstock, Jennifer

    2013-11-07

    A cloud properties and radiative heating rates dataset is presented where cloud properties retrieved using lidar and radar observations are input into a radiative transfer model to compute radiative fluxes and heating rates at three ARM sites located in the Tropical Western Pacific (TWP) region. The cloud properties retrieval is a conditional retrieval that applies various retrieval techniques depending on the available data, that is if lidar, radar or both instruments detect cloud. This Combined Remote Sensor Retrieval Algorithm (CombRet) produces vertical profiles of liquid or ice water content (LWC or IWC), droplet effective radius (re), ice crystal generalized effective size (Dge), cloud phase, and cloud boundaries. The algorithm was compared with 3 other independent algorithms to help estimate the uncertainty in the cloud properties, fluxes, and heating rates (Comstock et al. 2013). The dataset is provided at 2 min temporal and 90 m vertical resolution. The current dataset is applied to time periods when the MMCR (Millimeter Cloud Radar) version of the ARSCL (Active Remotely-Sensed Cloud Locations) Value Added Product (VAP) is available. The MERGESONDE VAP is utilized where temperature and humidity profiles are required. Future additions to this dataset will utilize the new KAZR instrument and its associated VAPs.

  7. Effect of moderate magnetic annealing on the microstructure, quasi-static and viscoelastic mechanical behavior of a structural epoxy

    SciTech Connect (OSTI)

    Tehrani, Mehran; Al-Haik, Marwan; Garmestani, Hamid; Li, Dongsheng

    2012-01-01

    In this study the effect of moderate magnetic fields on the microstructure of a structural epoxy system was investigated. The changes in the microstructure have been quantitatively investigated using wide angle x-ray diffraction (WAXD) and pole figure analysis. The mechanical properties (modulus, hardness and strain rate sensitivity parameter) of the epoxy system annealed in the magnetic field were probed with the aid of instrumented nanoindentation and the results are compared to the reference epoxy sample. To further examine the creep response of the magnetically annealed and reference samples, short 45 min duration creep tests were carried out. An equivalent to the macro scale creep compliance was calculated using the aforementioned nano-creep data. Using the continuous complex compliance (CCC) analysis, the phase lag angle, tan (?), between the displacement and applied force in an oscillatory nanoindentation test was measured for both neat and magnetically annealed systems through which the effect of low magnetic fields on the viscoelastic properties of the epoxy was invoked. The comparison of the creep strain rate sensitivity parameter , A/d(0), from short term(80 ), creep tests and the creep compliance J(t) from the long term(2700 s) creep tests with the tan(?) suggests that former parameter is a more useful comparative creep parameter than the creep compliance. The results of this investigation reveal that under low magnetic fields both the quasi-static and viscoelastic mechanical properties of the epoxy have been improved.

  8. Electrochemical peroxidation of PCBs and VOCs in superfund site water and sediments

    SciTech Connect (OSTI)

    Scrudato, R.J.; Chiarenzelli, J.R.

    1996-12-31

    An electrochemical peroxidation (ECP) process has been developed and used to degrade polychlorinated biphenyls (PCB) and volatile organic compounds (VOC)-contaminated water, sludge, and sediments at a New York State Federal and State Superfund Site. The process involves passing an oscillating low-amperage (<10 amps) current through steel electrodes immersed in an acidified water or sediment slurry into which hydrogen peroxide (<1,000 ppm) is added. The generated free radicals attack organic compounds, including organo-metallic complexes and refractory compounds including PCBs. PCB degradation ranged from about 30% to 80% in experiments involving Federal Superfund Site sediments; total PCBs were reduced by {approximately}97% to 68%, respectively, in water and slurry collected from a State Superfund subsurface storage tank. VOC bench-scale experiments involved chloroethane, 1,1-dichloroethane, dichloromethane, 1,1,1-trichloroethane, and acetone and after a 3-min ECP treatment, degradation ranged from >94% to about 99.9%. Results indicate the ECP is a viable process to degrade organic contaminants in water and sediment suspensions. Because the treated water suspensions are acidified, select trace metal sorbed to the particulates is solubilized and therefore can be segregated from the particulates, offering a process that simultaneously degrades organic contaminants and separates trace metals. 19 refs., 1 fig., 4 tabs.

  9. SUBMERGED GRAVEL SCRUBBER DEMONSTRATION AS A PASSIVE AIR CLEANER FOR CONTAINMENT VENTING AND PURGING WITH SODIUM AEROSOLS -- CSTF TESTS AC7 - AC10

    SciTech Connect (OSTI)

    HILLIARD, R K.; MCCORMACK, J D.; POSTMA, A K.

    1981-11-01

    Four large-scale air cleaning tests (AC7 - AC10) were performed in the Containment Systems Test Facility (CS'lF) to demonstrate the performance of a Submerged Gravel Scrubber for cleaning the effluent gas from a vented and purged breeder reactor containment vessel. The test article, comprised of a Submerged Gravel Scrubber (SGS) followed by a high efficiency fiber demister, had a design gas flow rate of 0.47 m{sup 3}/s (1000 ft{sup 3}/min) at a pressure drop of 9.0 kPa (36 in. H{sub 2}O). The test aerosol was sodium oxide, sodium hydroxide, or sodium carbonate generated in the 850-m{sup 3} CSTF vessel by continuously spraying sodium into the air-filled vessel while adding steam or carbon dioxide. Approximately 4500 kg (10,000 lb) of sodium was sprayed over a total period of 100 h during the tests. The SGS/Demister system was shown to be highly efficient (removing ~99.98% of the entering sodium aerosol mass), had a high mass loading capacity, and operated in a passive manner, with no electrical requirement. Models for predicting aerosol capture, gas cooling, and pressure drop are developed and compared with experimental results.

  10. PHOTOS: 10 Years, 10 Breakthroughs at Argonne's Fastest Supercomputer...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... Image: Courtesy of CERN. Adding renewables to the electric grid 8 of 10 Adding renewables to the electric grid Adding renewable energy to the electric grid is tricky, because solar ...

  11. Flexibility Reserve Reductions from an Energy Imbalance Market...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... 300- 620 Load Following or Fast Energy Markets Similar to regulation but slower. Bridges between the regulation service and the hourly energy markets. 10 min 10 min to hours ...

  12. Search for: All records | Data Explorer

    Office of Scientific and Technical Information (OSTI)

    ARM: Eddy Correlation CO2 Flux Data: 25 m samples, 30-min stats Dave Billesbach ; Stephen Chan ; Sebastien Biraud Eddy Correlation CO2 Flux Data: 25 m samples, 30-min stats View ...

  13. Appendix B Surface Infiltration and Aquifer Test Data

    Office of Legacy Management (LM)

    B Surface Infiltration and Aquifer Test Data This page intentionally left blank ... 1000 1100 1200 1300 1400 TIME (MIN) INF-8 TEST I 300 400 TIME (MIN) INF-8 TEST 2 200 250 ...

  14. Search for: All records | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    Search for: All records CreatorsAuthors contains: "Zhang, Zhi-Min" Sort by Relevance ... Strahl, Brian D. (1) Wang, Gang Greg (1) Wang, Yinsheng (1) Zhang, Zhi-Min (1) Save ...

  15. OFFICE OF CIVIL RIGHTS NA-1.2 VIDEO LIBRARY Item Title

    National Nuclear Security Administration (NNSA)

    Dupont Company 2 Harassment Hurts: It's Personal 1 DVD 16 min 2009 ATS Media 3 Harassment Is .. (government version) 1 DVD 21 min 2005 Coastal Training Technologies Corp. A Dupont ...

  16. Report for WIPP UG Sample #3, R15C5 (9/3/14)

    Office of Environmental Management (EM)

    ... to 95% A in 3 min, hold for 10 min Flow rate: 200 Lmin Column brandphase: Waters Atlantis T3C18 Column Length x ID x Particle size: 150 mm x 2.1 mm x 3 m Column ...

  17. Policy Flash 2015-04 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    or at sharon.archer@hq.doe.gov Attachments: PDF icon Policy Flash 2015-04 - Class Dev Min Wage.pdf PDF icon Class Dev Min Wage - Attach 1 Clause 52 222-99.pdf PDF icon Class...

  18. Comparison of accelerator technologies for use in ADSS (Conference...

    Office of Scientific and Technical Information (OSTI)

    Accelerator Driven Subcritical (ADS) fission is an interesting candidate basis for nuclear waste transmutation and for nuclear power generation. ADS can use either thorium or ...

  19. Fermilab Today - Classifieds

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Subscribe | Contact Us | Archive | Classifieds | Guidelines | Help Search GO Classified ... Please read the Fermilab Today classified ad policy before submitting your ad. For Sale ...

  20. Weather and the Transport of Hazardous Materials | Department...

    Office of Environmental Management (EM)

    Ad Hoc Working Group Transportation Plan Ad Hoc Working Group Guide to Federal Funding, Financing, and Technical Assistance for Plug-in Electric Vehicles and Charging Stations

  1. MWRRET (Microwave Radiometer Retrievals)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Plus Plus Andy Vogelmann, Dave Turner Andy Vogelmann, Dave Turner & Jennifer Comstock & Jennifer Comstock Min Min Susanne Crewell Susanne Crewell Ulrich L Ulrich L ö ö rnard rnard Jim Liljegren Jim Liljegren John Ogre John Ogre . Y. Matrosov . Y. Matrosov Sally McFarlane Sally McFarlane Warren Wiscombe, Christine Chiu, Sasha Marshak, Maria Warren Wiscombe, Christine Chiu, Sasha Marshak, Maria Cadeddu, Qilong Min, Susanne Crewell, Ulrich L Cadeddu, Qilong Min, Susanne Crewell, Ulrich L

  2. Factors Effecting the Fate and Transport of CL-20 in the Vadose Zone and Groundwater: Final Report 2002 - 2004 SERDP Project CP-1255

    SciTech Connect (OSTI)

    Szecsody, James E.; Riley, Robert G.; Devary, Brooks J.; Girvin, Donald C.; Resch, Charles T.; Campbell, James A.; Fredrickson, Herbert L.; Thompson, Karen T.; Crocker, Fiona H.; Qasim, Mohammad M.; Gamerdinger, Amy P.; Lemond, Luke A.

    2005-06-01

    will range from weeks (iron reducing systems) to years. Although CL-20 will move rapidly through most sediments in the terrestrial environment, subsurface remediation can be utilized for cleanup. Transformation of CL-20 to intermediates can be rapidly accomplished under: a) reducing conditions (CL-20 4.1 min. half-life, RDX 18 min. half-life), b) alkaline (pH >10) conditions, and c) bioremediation with added nutrients. CL-20 degradation to intermediates may be insufficient to mitigate environmental impact, as the toxicity of many of these compounds is unknown. Biostimulation in oxic to reducing systems by carbon and nutrient addition can mineralize CL-20, with the most rapid rates occurring under reducing conditions.

  3. Layered zeolite materials and methods related thereto

    DOE Patents [OSTI]

    Tsapatsis, Michael; Maheshwari, Sudeep; Bates, Frank S; Koros, William J

    2013-08-06

    A novel oxide material (MIN-I) comprising YO.sub.2; and X.sub.2O.sub.3, wherein Y is a tetravalent element and X is a trivalent element, wherein X/Y=O or Y/X=30 to 100 is provided. Surprisingly, MIN-I can be reversibly deswollen. MIN-I can further be combined with a polymer to produce a nanocomposite, depolymerized to produce predominantly fully exfoliated layers (MIN-2), and pillared to produce a pillared oxide material (MIN-3), analogous to MCM-36. The materials are useful in a wide range of applications, such as catalysts, thin films, membranes, and coatings.

  4. ARM - Evaluation Product - Scanning ARM Cloud Radar Corrections...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    added moment variables (reflectivitycorrected, meandopplervelocitycorrected, and meandopplervelocitycorrected2) provide radar moments filtered to remove measurement...

  5. modeling-sediment-html

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Modeling of Sediment Transport and Porous Medium Response Under Current ad Waves

  6. The?Spectrum?of?Data?Intensive? Compu6ng?Ac6vi6es?at?L...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    oneyoumightwanttopayaFen5on to...) StandardApproach * KalmanBucysolvedproblemsexactlyfor linearsystems,Gaussiannoise,ad...

  7. Part III - List of Documents, Exhibits, and Other Attachments

    National Nuclear Security Administration (NNSA)

    J FY 2008 PARENT OVERSIGHT PLAN To Be Added at a Later Date

  8. SECTION L… ATTACHMENT H

    National Nuclear Security Administration (NNSA)

    III-SECTION J APPENDIX K TRANSITION PLAN To be Added at a Later Date

  9. New Generation Dresden NPP Demineralizer Vault Cleanup Project

    SciTech Connect (OSTI)

    Denton, M.S.; CET, Ph.D.; Forrester, K.; Azar, M.

    2008-07-01

    also show that the actual volumetric fraction of solids produced are relatively small. In order to estimate the amount of material (Al or Fe depending on the electrode material) added by the EC process, a rough rule of thumb has been found to be {approx}15 ppm per amp-minute. It was found with most wastewaters that Cs seeding (if that step is required) added {approx} 100 ppm Cs Seed and 10-15 ppm/amp minute additional floc from the electrodes. In a typical BWR wastewater case, where the TSS represented {<=} 0.15 wt% ({approx}1500 ppm). At 1.5 amp-min., the Al (III) added by the EC process would be {approx} 20 ppm, or {approx} 60 ppm as Al(OH){sub 3}. It was found the relatively low floc [{approx} 40 ppm as dried Al(OH){sub 3}] worked quite well for the high colloid level present ({approx}1500 ppm), and would be even more enhanced with the use of recycle. Even at that relatively low treatment dose, the colloidal TSS in the wastewater was effectively flocculated to yield agglomerates that were easily filtered and dewatered. Another rule of thumb is that, empirically, TDS (in mg/l) is typically {approx}0.5 X conductivity (in umho/cm). For instance, a conductivity reading of 100 umho/cm corresponds to about 50 ppm of TDS. As can be seen, the amount of material actually added in this vault cleanup of {approx}15 ppm per amp-min compared to the existing {approx}1500 ppm of TDS present (0.5 X conductivity of 3000 {mu}mho/cm) is minimal. In this vault cleanup, as a precautionary measure, the HIC was a specially designed Press-Pak with internal sheet filters, final dewatering leg, and a expandable, outer bladder if needed for final dewatering. It was found after filling the first HIC, of two, that the material dewatered and passed final dewatering tests without the need for the precautionary Press-Pak feature. Original estimates by the evaluation team estimated it would take some 11 to 12 HICs to remove the vault contents to a remote location for treatment, dewatering and final

  10. Additional Programming Models

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Weatherize » Insulation » Adding Insulation to an Existing Home Adding Insulation to an Existing Home Adding insulation in an existing home saves money and improves comfort. | Photo courtesy of Dennis Schroeder, NREL. Adding insulation in an existing home saves money and improves comfort. | Photo courtesy of Dennis Schroeder, NREL. Unless your home was specially constructed for energy efficiency, you can probably reduce your energy bills by adding more insulation. Many older homes have less

  11. Creep-Fatigue Behavior of Alloy 617 at 850°C

    SciTech Connect (OSTI)

    Carroll, Laura

    2015-05-01

    Creep-fatigue deformation is expected to be a significant contributor to the potential factors that limit the useful life of the Intermediate Heat Exchanger (IHX) in the Very High Temperature Reactor (VHTR) nuclear system.[1] The IHX of a high temperature gas reactor will be subjected to a limited number of transient cycles due to start-up and shut-down operations imparting high local stresses on the component. This cycling introduces a creep-fatigue type of interaction as dwell times occur intermittently. The leading candidate alloy for the IHX is a nickel-base solid solution strengthened alloy, Alloy 617, which must safely operate near the expected reactor outlet temperature of up to 950 °C.[1] This solid solution strengthened nickel-base alloy provides an interesting creep-fatigue deformation case study because it has characteristics of two different alloy systems for which the cyclic behavior has been extensively investigated. Compositionally, it resembles nickel-base superalloys, such as Waspalloy, IN100, and IN718, with the exception of its lower levels of Al. At temperatures above 800 °C, the microstructure of Alloy 617, however, does not contain the ordered ?’ or ?’’ phases. Thus microstructurally, it is more similar to an austenitic stainless steel, such as 316 or 304, or Alloy 800H comprised of a predominantly solid solution strengthened matrix phase with a dispersion of inter- and intragranular carbides. Previous studies of the creep-fatigue behavior of Alloy 617 at 950 °C indicate that the fatigue life is reduced when a constant strain dwell is added at peak tensile strain.[2-5] This results from the combination of faster crack initiation occurring at surface-connected grain boundaries due to oxidation from the air environment along with faster, and intergranular, crack propagation resulting from the linking of extensive interior grain boundary cracking.[3] Saturation, defined as the point at which further increases in the strain

  12. Optimization of preparation of Rh-105 labeled (B72.3) MOAB using an amine oxime ligand and comparison of its biodistribution with I-131 labeled B72.3 MOAB

    SciTech Connect (OSTI)

    Venkatesh, M.; Kilcoin, T.T.; Schlemper, E.O.

    1994-05-01

    Propyleneamineoxime ligands with the four N donor atoms form stable complexes with Rh(III). The p-aminobenzylpropyleneamineoxime ligand (L) was made to act as a bifunctional chelating agent to label proteins with Rh-105. This study encompasses the optimization of formation of the Rh-105 complex of L, its purification, activation with thiophosgene, conjugation the B72.3 MOAB, purification by gel filtration, determination of its stability in physiological buffers and in human serum and comparison of the biodistribution Rh-105 labeled antibody with I-131 labeled antibody in normal healthy mice. Rh-105 was complexed with the ligand L by refluxing at pH 5-6 for 45 min. CuCl, was added to form a charged complex and the neutral activated Rh-105 complex extracted into chloroform. Following evaporation of CHC1{sub 3}, the complex was dissolved in 20 {mu}1 of DMF and reconstituted with 0.5 ml of saline. This was then reacted with the B72.3 MOAB in 0.05 M bicarbonate buffer at pH 9 and incubated for 3 h at 37{degrees}C. The complexation yields were generally 95% and the conjugation yields {approximately}60%. The Rh-105 conjugate was stable at room temperature in phosphate buffer saline (pH 7.4), bicarbonate buffer saline (pH 8.5) and human serum at 37{degrees}C for 4 days. >95% of the conjugate remained immunoreactive using mucin-bound to sepharose as the antigen. I-131 labeled antibody was prepared by using iodogen as the oxidizing agent. The two labeled antibodies were co-injected into healthy mice and the biodistribution studied at different time intervals. The biodistribution studies show good correlation between I-131 and Rh-105 labeled B72.3 MOAB preparations over 20 h demonstrating good in vivo stability. This ligand may be useful as a bifunctional chelating agent for Rh-105 labeled antibody.

  13. Total cyanide mass measurement with micro-ion selective electrode for determination of specific activity of carbon-11 cyanide

    SciTech Connect (OSTI)

    Shea, Colleen; Alexoff, David L.; Kim, Dohyun; Hoque, Ruma; Schueller, Michael J.; Fowler, Joanna S.; Qu, Wenchao

    2015-04-25

    In this study, we aim to directly measure the specific activity (SA) of the carbon-11 cyanide ([11C]CN¯) produced by our in-house built automated [11C]HCN production system and to identify the major sources of 12C-cyanide (12CN¯). The [11C]CN¯ is produced from [11C]CO2, which is generated by the 14N(p,α)11C nuclear reaction using a cyclotron. Direct measurement of cyanide concentrations was accomplished using a relatively inexpensive, and easy to use ion selective electrode (ISE) which offered an appropriate range of sensitivity for detecting mass. Multiple components of the [11C]HCN production system were isolated in order to determine their relative contributions to 12CN¯ mass. It was determined that the system gases were responsible for approximately 30% of the mass, and that the molecular sieve/nickel furnace unit contributed approximately 70% of the mass. Beam on target (33 µA for 1 and 10 min) did not contribute significantly to the mass. Additionally, we compared the SA of our [11C]HCN precursor determined using the ISE to the SA of our current [11C]CN¯ derived radiotracers determined by HPLC to assure there was no significant difference between the two methods. These results are the first reported use of an ion selective electrode to determine the SA of no-carrier-added cyanide ion, and clearly show that it is a valuable, inexpensive and readily available tool suitable for this purpose.

  14. Piston Bowl Optimization for RCCI Combustion in a Light-Duty Multi-Cylinder Engine

    SciTech Connect (OSTI)

    Hanson, Reed M; Curran, Scott; Wagner, Robert M; Reitz, Rolf; Kokjohn, Sage

    2012-01-01

    Reactivity Controlled Compression Ignition (RCCI) is an engine combustion strategy that that produces low NO{sub x} and PM emissions with high thermal efficiency. Previous RCCI research has been investigated in single-cylinder heavy-duty engines. The current study investigates RCCI operation in a light-duty multi-cylinder engine at 3 operating points. These operating points were chosen to cover a range of conditions seen in the US EPA light-duty FTP test. The operating points were chosen by the Ad Hoc working group to simulate operation in the FTP test. The fueling strategy for the engine experiments consisted of in-cylinder fuel blending using port fuel-injection (PFI) of gasoline and early-cycle, direct-injection (DI) of diesel fuel. At these 3 points, the stock engine configuration is compared to operation with both the original equipment manufacturer (OEM) and custom machined pistons designed for RCCI operation. The pistons were designed with assistance from the KIVA 3V computational fluid dynamics (CFD) code. By using a genetic algorithm optimization, in conjunction with KIVA, the piston bowl profile was optimized for dedicated RCCI operation to reduce unburned fuel emissions and piston bowl surface area. By reducing these parameters, the thermal efficiency of the engine was improved while maintaining low NOx and PM emissions. Results show that with the new piston bowl profile and an optimized injection schedule, RCCI brake thermal efficiency was increased from 37%, with the stock EURO IV configuration, to 40% at the 2,600 rev/min, 6.9 bar BMEP condition, and NOx and PM emissions targets were met without the need for exhaust after-treatment.

  15. Second test of base hydrolysate decomposition in a 0.04 gallon per minute scale reactor

    SciTech Connect (OSTI)

    Cena, R.J.; Thorsness, C.B.; Coburn, T.T.; Watkins, B.E.

    1994-10-11

    LLNL has built and operated a pilot plant for processing oil shale using recirculating hot solids. This pilot plant, was adapted in 1993 to demonstrate the feasibility of decomposing base hydrolysate, a mixture of sodium nitrite, sodium formate and other constituents. This material is the waste stream from the base hydrolysis process for destruction of energetic materials. In the Livermore process, the waste feed is thermally treated in a moving packed bed of ceramic spheres, where constituents in the waste decompose, in the presence of carbon dioxide, to form solid sodium carbonate and a suite of gases including: methane, carbon monoxide, oxygen, nitrogen oxides, ammonia and possibly molecular nitrogen. The ceramic spheres are circulated and heated, providing the energy required for thermal decomposition. The spheres provide a large surface area for evaporation and decomposition to occur, avoiding sticking and agglomeration of the waste. We performed a 2.5 hour test of the solids recirculation system, with continuous injection of approximately 0.04 gal/min of waste. Gasses from the packed bed reactor were directed through the lift pipe and water was not condensed. Potassium carbonate (0.356 M) was added to the hydrolysate prior to its introduction to the retort. Continuous on-line gas analysis was invaluable in tracking the progress of the experiment and quantifying the decomposition products. Analyses showed the primary solid product, collected in the lift exit cyclone, was indeed sodium carbonate, as expected. For the reactor condition studied in this test, N{sub 2}O was found to be the primary nitrogen bearing gas species. In the test, approximately equal quantities of ammonia and nitrogen bearing oxide gases were produced. Under proper conditions, this ammonia and NO{sub x} can be recombined downstream to form N{sub 2} and O{sub 2} as the primary effluent gases.

  16. Long-term Measurements of Submicrometer Aerosol Chemistry at the Southern Great Plains (SGP) Using an Aerosol Chemical Speciation Monitor (ACSM)

    SciTech Connect (OSTI)

    Parworth, Caroline; Fast, Jerome D.; Mei, Fan; Shippert, Timothy R.; Sivaraman, Chitra; Tilp, Alison; Watson, Thomas; Zhang, Qi

    2015-04-01

    In this study the long-term trends of non-refractory submicrometer aerosol (NR-PM1) composition and mass concentration measured by an Aerosol Chemical Speciation Monitor (ACSM) at the U.S. Department of Energy’s Southern Great Plains (SGP) site are discussed. Over the period of 19 months (Nov. 20, 2010 – June 2012) highly time resolved (~30 min.) NR-PM1 data was recorded. Using this dataset the value-added product (VAP) of deriving organic aerosol components (OACOMP) is introduced. With this VAP, multivariate analysis of the measured organic mass spectral matrix can be performed on long term data to return organic aerosol (OA) factors that are associated with distinct sources, evolution processes, and physiochemical properties. Three factors were obtained from this VAP including two oxygenated OA (OOA) factors, differing in degrees of oxidation, and a biomass burning OA (BBOA) factor. Back trajectory analyses were performed to investigate possible sources of major NR-PM1 species at the SGP site. Organics dominated NR-PM1 mass concentration for the majority of the study with the exception of winter, when nitrate increased due to transport of precursor species from surrounding urban and agricultural areas and also due to cooler temperatures. Sulfate mass concentrations showed little seasonal variation with mixed regional and local sources. In the spring BBOA emissions increased and were mainly associated with local fires. Isoprene and carbon monoxide emission rates were computed by the Model of Emissions of Gases and Aerosols from Nature (MEGAN) to represent the spatial distribution of biogenic and anthropogenic sources, respectively. From this model there is evidence to support that biogenic emissions from the southeast contribute to SOA formation at the SGP site during the summer.

  17. Tin removal from extreme ultraviolet collector optics by inductively coupled plasma reactive ion etching

    SciTech Connect (OSTI)

    Shin, H.; Srivastava, S. N.; Ruzic, D. N. [Center for Plasma Material Interactions, University of Illinois at Urbana-Champaign, Urbana, Illinois 61801 (United States)

    2008-05-15

    Tin (Sn) has the advantage of delivering higher conversion efficiency compared to other fuel materials (e.g., Xe or Li) in an extreme ultraviolet (EUV) source, a necessary component for the leading next generation lithography. However, the use of a condensable fuel in a lithography system leads to some additional challenges for maintaining a satisfactory lifetime of the collector optics. A critical issue leading to decreased mirror lifetime is the buildup of debris on the surface of the primary mirror that comes from the use of Sn in either gas discharge produced plasma (GDPP) or laser produced plasma (LPP). This leads to a decreased reflectivity from the added material thickness and increased surface roughness that contributes to scattering. Inductively coupled plasma reactive ion etching with halide ions is one potential solution to this problem. This article presents results for etch rate and selectivity of Sn over SiO{sub 2} and Ru. The Sn etch rate in a chlorine plasma is found to be much higher (of the order of hundreds of nm/min) than the etch rate of other materials. A thermally evaporated Sn on Ru sample was prepared and cleaned using an inductively coupled plasma etching method. Cleaning was confirmed using several material characterization techniques. Furthermore, a collector mock-up shell was then constructed and etching was performed on Sn samples prepared in a Sn EUV source using an optimized etching recipe. The sample surface before and after cleaning was analyzed by atomic force microscopy, x-ray photoelectron spectroscopy, and Auger electron spectroscopy. The results show the dependence of etch rate on the location of Sn samples placed on the collector mock-up shell.

  18. Alleviation of interferences and reduction of sample memory in inductively coupled plasma mass spectrometry

    SciTech Connect (OSTI)

    Smith, F.G.

    1991-06-27

    A simple variation sample preparation and introduction allows the measurement of chlorine isotope ratios by inductively coupled plasma mass spectroscopy (ICP-MS). Dissolution of the sample in D{sub 2}O rather than H{sub 2}O attenuates the major polyatomic ion {sup 36}ArH{sup +} and frees m/z = 37 for determination of {sup 37}Cl{sup +}. The isotope ratio {sup 35}Cl/{sup 37}Cl in a 50 mg L{sup {minus}1} solution of Cl as LiCl is determined with a relative standard deviation (RDS) of 0.21%. A method for the determination of boron is a variety of biological samples is described. Sample material is fused with Na{sub 2}CO{sub 3} and boron is separated from matrix components by using Amberlite IRA-743 boron selective ion-exchange resin. Boron is eluted with 1% HNO{sub 3} and samples are introduced to an ICP-mass spectrometer with a direct injection nebulizer (DIN). Xenon is added at 10 or 37 mL min{sup {minus}1} to the aerosol gas flow of an argon ICP-mass spectrometer. Addition of Xe substantially reduces polyatomic ions such as N{sub 2}{sup +}, HN{sub 2}{sup +}, NO{sup +}, ArH{sup +}, ClO{sup +}, ArC{sup +}, ClOH{sup +}, ArN{sup +}, and ArO{sup +} and facilitates the measurement of Si, K, V, Cr, and Fe. Isotope ratios are determined with RSDs from 0.6% to 1.6%. 210 refs., 14 figs., 19 tabs.

  19. Total cyanide mass measurement with micro-ion selective electrode for determination of specific activity of carbon-11 cyanide

    SciTech Connect (OSTI)

    Shea, Colleen; Alexoff, David L.; Kim, Dohyun; Hoque, Ruma; Schueller, Michael J.; Fowler, Joanna S.; Qu, Wenchao

    2015-04-25

    In this study, we aim to directly measure the specific activity (SA) of the carbon-11 cyanide ([11C]CN) produced by our in-house built automated [11C]HCN production system and to identify the major sources of 12C-cyanide (12CN). The [11C]CN is produced from [11C]CO2, which is generated by the 14N(p,?)11C nuclear reaction using a cyclotron. Direct measurement of cyanide concentrations was accomplished using a relatively inexpensive, and easy to use ion selective electrode (ISE) which offered an appropriate range of sensitivity for detecting mass. Multiple components of the [11C]HCN production system were isolated in order to determine their relative contributions to 12CN mass. It was determined that the system gases were responsible for approximately 30% of the mass, and that the molecular sieve/nickel furnace unit contributed approximately 70% of the mass. Beam on target (33 A for 1 and 10 min) did not contribute significantly to the mass. Additionally, we compared the SA of our [11C]HCN precursor determined using the ISE to the SA of our current [11C]CN derived radiotracers determined by HPLC to assure there was no significant difference between the two methods. These results are the first reported use of an ion selective electrode to determine the SA of no-carrier-added cyanide ion, and clearly show that it is a valuable, inexpensive and readily available tool suitable for this purpose.

  20. Characterization of Clostridium thermocellum JW20

    SciTech Connect (OSTI)

    Freier, D.; Mothershed, C.P.; Wiegel, J.

    1988-01-01

    Clostridium thermocellum JW20 (ATCC 31549), which was isolated from a Louisiana cotton bale, grew on cellulose, cellobiose, and xylooligomers and, after adaptation, on glucose, fructose, and xylose in the pH range of 7.5 to 6.1 with T/sub opt/ of 60/sup 0/C, T/sub max/ of 69/sup 0/C, and T/sub min/ of above 28/sup 0/C. Doubling times during growth on cellulose and cellobiose were 6.5 and 2.6 h, respectively. The G+C content of the DNA was 40 mol% (chemical analysis). Growth on cellulose as substrate was totally inhibited in the presence of more than 125 mM sodium sulfate, 300 mM sodium chloride, 250 mM potassium chloride, 200 mM calcium chloride, 125 mM magnesium chloride, 40 mM lactate, or 250 mM acetate. The ratio of the fermentation products ethanol to acetate plus H/sub 2/ decreased when the culture was agitated. Agitation otherwise increased the rate of cellulose degradation in a growing culture but not under nongrowth conditions or with cell-free culture supernatant containing the extracellular cellulase. Shaking lowered the concentration of H/sub 2/ in the culture broth and thus minimized inhibition by the H/sub 2/ formed. Externally added H/sub 2/ caused an increased formation of ethanol during growth on cellulose or cellobiose. However, at an atmospheric pressure as high as 355 kPa (50 lb/in/sup 2/), H/sub 2/ did not cause significant growth inhibition beyond an increasing lag phase (up to 24 h). Several criteria to specifically prove the purity of C. thermocellum cultures were suggested.

  1. Demonstrate Scale-up Procedure for Glass Composite Material (GCM) for Incorporation of Iodine Loaded AgZ.

    SciTech Connect (OSTI)

    Nenoff, Tina M.; Garino, Terry J.; Croes, Kenneth James; Rodriguez, Mark A.

    2015-07-01

    Two large size Glass Composite Material (GCM) waste forms containing AgI-MOR were fabricated. One contained methyl iodide-loaded AgI-MOR that was received from Idaho National Laboratory (INL, Test 5, Beds 1 – 3) and the other contained iodine vapor loaded AgIMOR that was received from Oak Ridge National Laboratory (ORNL, SHB 2/9/15 ). The composition for each GCM was 20 wt% AgI-MOR and 80 wt% Ferro EG2922 low sintering temperature glass along with enough added silver flake to prevent any I2 loss during the firing process. The silver flake amounts were 1.2 wt% for the GCM with the INL AgI-MOR and 3 wt% for the GCM contained the ORNL AgI-MOR. The GCMs, nominally 100 g, were first uniaxially pressed to 6.35 cm (2.5 inch) diameter disks then cold isostatically pressed, before firing in air to 550°C for 1hr. They were cooled slowly (1°C/min) from the firing temperature to avoid any cracking due to temperature gradients. The final GCMs were ~5 cm in diameter (~2 inches) and non-porous with densities of ~4.2 g/cm³. X-ray diffraction indicated that they consisted of the amorphous glass phase with small amounts of mordenite and AgI. Furthermore, the presence of the AgI was confirmed by X-ray fluorescence. Methodology for the scaled up production of GCMs to 6 inch diameter or larger is also presented.

  2. Coal-fueled diesel locomotive test

    SciTech Connect (OSTI)

    Hsu, B.D.; McDowell, R.E.; Confer, G.L.; Basic, S.L.

    1993-01-01

    The biggest challenges to the development of a commercially-acceptable coal-fueled diesel-electric locomotive are integrating all systems into a working unit that can be operated in railroad service. This involves mainly the following three systems: (1) the multi-cylinder coal-fueled diesel engine, (2) the locomotive and engine controls, and (3) the CWS fuel supply system. Consequently, a workable 12-cylinder coal-fueled diesel engine was considered necessary at this stage to evolve the required locomotive support systems, in addition to gaining valuable multi-cylinder engine operating experience. The CWS fuel used during this project was obtained from Otisca, Inc. (Syracuse, NY). It was prepared from micronized and deashed Kentucky Blue Gem coal to 49.0% coal loading by weight, with less than 1% ash and 5 micron mean diameter particle size. Its higher heating value was analyzed at approximately 34630 kJ/k. Anti-agglomerating additive Triton X-114 was added to the CWS at GE Transportation Systems at 2% of coal weight. The nature of the Otisca CWS fuel makes it inherently more difficult to store, pump, and inject than diesel fuel, since concepts which govern Newtonian or normally viscous liquids do not apply entirely to CWS. Otisca CWS tends to be unstable and to settle in tanks and lines after a period of time, making it necessary to provide a means of agitation during storage. To avoid long term settling problems and to minimize losses, piping velocities were designed to be in the 60-90 m/min range.

  3. WE-G-BRE-01: A High Power Nanotube X-Ray Microbeam Irradiator for Preclinical Brain Tumor Treatment

    SciTech Connect (OSTI)

    Chtcheprov, P; Inscoe, C; Zhang, L; Lu, J; Zhou, O; Chang, S; Sprenger, F; Laganis, P

    2014-06-15

    Purpose: Microbeam radiation therapy (MRT) is a new type of cancer treatment undergoing studies at various synchrotron facilities. The principle of MRT is using arrays of microscopically small, low-energy X-radiation for the treatment of various radio-resistant, deep-seated tumors. Our motivation is to develop a compact and inexpensive image guided MRT irradiator to use in the research lab setting. After a successful initial demonstration, here we report a second generation carbon nanotube (CNT) cathode based MRT tube, capable of producing multiple microbeam lines with an anticipated dose rate of 11 Gy/min per line. Methods: The system uses multiple line CNT source arrays to generate multiple focal lines on the anode. The increase in dose-rate, compared to our first generation system, is achieved by increasing the operating voltage from 160 kVp to 225kVp, adding multiple simultaneous focal lines on the anode, and a more efficient cooling mechanism using a 6kW oil-cooled anode. Results: This work will present the design and development process, challenges and solutions to meeting operating specifications, and the final design of the tube and collimator, along with optimization and stabilization of its use. A detailed characterization of its capabilities will be included with a comprehensive measurement of its X-ray focal line dimensions, an evaluation of its collimator alignment and microbeam dimensions, and phantom-based quantification of its dosimetric output. Conclusion: The development of a second generation, compact, multiple line MRT device using carbon nanotube (CNT) cathode based X-ray technology and a novel oil cooled anode design is presented here. With this new source, we are capable of delivering a total microbeam radiation dose comparable to the low end of the synchrotron based MRT systems for small animal brain tumor models.

  4. An efficient and practical synthesis of [2-11C]indole via superfast nucleophilic [11C]cyanation and RANEY® Nickel catalyzed reductive cyclization

    SciTech Connect (OSTI)

    So Jeong Lee; Fowler, Joanna S.; Alexoff, David; Schueller, Michael; Kim, Dohyun; Nauth, Alexander; Weber, Carina; Kim, Sung Won; Hooker, Jacob M.; Ma, Ling; Qu, Wenchao

    2015-09-21

    We developed a rapid method for the synthesis of carbon-11 radiolabeled indole using a sub-nanomolar quantity of no-carrier-added [11C]cyanide as radio-precursor. Based upon a reported synthesis of 2-(2-nitrophenyl)acetonitrile (2), a highly reactive substrate 2-nitrobenzyl bromide (1) was evaluated for nucleophilic [11C]cyanation. Additionally, related reaction conditions were explored with the goal of obtaining of highly reactive 2-(2-nitrophenyl)-[1-11C]acetonitrile ([11C]-2) while inhibiting its rapid conversion to 2,3-bis(2-nitrophenyl)-[1-11C]propanenitrile ([11C]-3). Next, a Raney Nickel catalyzed reductive cyclization method was utilized for synthesizing the desired [2-11C]indole with hydrazinium monoformate as the active reducing agent. Extensive and iterative screening of basicity, temperature and stoichiometry was required to overcome the large stoichiometry bias that favored 2-nitrobenzylbromide (1) over [11C]cyanide, which both caused further alkylation of the desired nitrile and poisoned the Raney Nickel catalyst. The result is an efficient two-step, streamlined method to reliably synthesize [2-11C]indole with an entire radiochemical yield of 21 ± 2.2% (n = 5, ranging from 18 – 24%). The radiochemical purity of the final product was > 98% and specific activity was 176 ± 24.8 GBq/μmol (n = 5, ranging from 141 – 204 GBq/μmol). The total radiosynthesis time including product purification by semi-preparative HPLC was 50 – 55 min from end of cyclotron bombardment.

  5. An efficient and practical synthesis of [2-11C]indole via superfast nucleophilic [11C]cyanation and RANEY® Nickel catalyzed reductive cyclization

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    So Jeong Lee; Fowler, Joanna S.; Alexoff, David; Schueller, Michael; Kim, Dohyun; Nauth, Alexander; Weber, Carina; Kim, Sung Won; Hooker, Jacob M.; Ma, Ling; et al

    2015-09-21

    We developed a rapid method for the synthesis of carbon-11 radiolabeled indole using a sub-nanomolar quantity of no-carrier-added [11C]cyanide as radio-precursor. Based upon a reported synthesis of 2-(2-nitrophenyl)acetonitrile (2), a highly reactive substrate 2-nitrobenzyl bromide (1) was evaluated for nucleophilic [11C]cyanation. Additionally, related reaction conditions were explored with the goal of obtaining of highly reactive 2-(2-nitrophenyl)-[1-11C]acetonitrile ([11C]-2) while inhibiting its rapid conversion to 2,3-bis(2-nitrophenyl)-[1-11C]propanenitrile ([11C]-3). Next, a Raney Nickel catalyzed reductive cyclization method was utilized for synthesizing the desired [2-11C]indole with hydrazinium monoformate as the active reducing agent. Extensive and iterative screening of basicity, temperature and stoichiometry was required tomore » overcome the large stoichiometry bias that favored 2-nitrobenzylbromide (1) over [11C]cyanide, which both caused further alkylation of the desired nitrile and poisoned the Raney Nickel catalyst. The result is an efficient two-step, streamlined method to reliably synthesize [2-11C]indole with an entire radiochemical yield of 21 ± 2.2% (n = 5, ranging from 18 – 24%). The radiochemical purity of the final product was > 98% and specific activity was 176 ± 24.8 GBq/μmol (n = 5, ranging from 141 – 204 GBq/μmol). The total radiosynthesis time including product purification by semi-preparative HPLC was 50 – 55 min from end of cyclotron bombardment.« less

  6. Total cyanide mass measurement with micro-ion selective electrode for determination of specific activity of carbon-11 cyanide

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Shea, Colleen; Alexoff, David L.; Kim, Dohyun; Hoque, Ruma; Schueller, Michael J.; Fowler, Joanna S.; Qu, Wenchao

    2015-04-25

    In this study, we aim to directly measure the specific activity (SA) of the carbon-11 cyanide ([11C]CN¯) produced by our in-house built automated [11C]HCN production system and to identify the major sources of 12C-cyanide (12CN¯). The [11C]CN¯ is produced from [11C]CO2, which is generated by the 14N(p,α)11C nuclear reaction using a cyclotron. Direct measurement of cyanide concentrations was accomplished using a relatively inexpensive, and easy to use ion selective electrode (ISE) which offered an appropriate range of sensitivity for detecting mass. Multiple components of the [11C]HCN production system were isolated in order to determine their relative contributions to 12CN¯ mass.more » It was determined that the system gases were responsible for approximately 30% of the mass, and that the molecular sieve/nickel furnace unit contributed approximately 70% of the mass. Beam on target (33 µA for 1 and 10 min) did not contribute significantly to the mass. Additionally, we compared the SA of our [11C]HCN precursor determined using the ISE to the SA of our current [11C]CN¯ derived radiotracers determined by HPLC to assure there was no significant difference between the two methods. These results are the first reported use of an ion selective electrode to determine the SA of no-carrier-added cyanide ion, and clearly show that it is a valuable, inexpensive and readily available tool suitable for this purpose.« less

  7. An oncolytic adenovirus enhances antiangiogenic and antitumoral effects of a replication-deficient adenovirus encoding endostatin by rescuing its selective replication in nasopharyngeal carcinoma cells

    SciTech Connect (OSTI)

    Liu, Ran-yi; Zhou, Ling; Zhang, Yan-ling; Huang, Bi-jun; Ke, Miao-la; Chen, Jie-min; Li, Li-xia; Fu, Xiang; Wu, Jiang-xue; Huang, Wenlin

    2013-12-13

    Highlights: •H101 promotes endostatin expression by Ad-Endo via rescuing Ad-Endo replication. •H101 rescued Ad-Endo replication by supplying E1A and E1B19k proteins. •Ad-Endo enhanced the cytotoxicity of H101 in NPC cells. •Ad-Endo and oncolytic Ad H101 have synergistic antitumor effects on NPC. -- Abstract: A replication-deficient adenovirus (Ad) encoding secreted human endostatin (Ad-Endo) has been demonstrated to have promising antiangiogenic and antitumoral effects. The E1B55k-deleted Ad H101 can selectively lyse cancer cells. In this study, we explored the antitumor effects and cross-interactions of Ad-Endo and H101 on nasopharyngeal carcinoma (NPC). The results showed that H101 dramatically promoted endostatin expression by Ad-Endo via rescuing Ad-Endo replication in NPC cells, and the expressed endostatin proteins significantly inhibited the proliferation of human umbilical vein endothelial cells. E1A and E1B19k products are required for the rescuing of H101 to Ad-Endo replication in CNE-1 and CNE-2 cells, but not in C666-1 cells. On the other hand, Ad-Endo enhanced the cytotoxicity of H101 by enhancing Ad replication in NPC cells. The combination of H101 and Ad-Endo significantly inhibited CNE-2 xenografts growth through the increased endostatin expression and Ad replication. These findings indicate that the combination of Ad-Endo gene therapy and oncolytic Ad therapeutics could be promising in comprehensive treatment of NPC.

  8. A taxonomy of automatic differentiation tools

    SciTech Connect (OSTI)

    Juedes, D.W. . Dept. of Computer Science)

    1991-01-01

    Many of the current automatic differentiation (AD) tools have similar characteristics. Unfortunately, the similarities between these various AD tools often cannot be easily ascertained by reading the corresponding documentation. To clarify this situation, a taxonomy of AD tools is presented. The taxonomy places AD tools into the Elemental, Extensional, Integral, Operational, and Symbolic classes. This taxonomy is used to classify twenty-nine AD tools. Each tool is examined individually with respect to the mode of differentiation used and the degree of derivatives computed. A list detailing the availability of the surveyed AD tools is provided in the Appendix. 54 refs., 3 figs., 1 tab.

  9. NUG 2013: Training - Getting Started at NERSC

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Getting Started at NERSC NUG 2013: Training - Getting Started at NERSC February 16, 2013 n logo Friday, Feb. 15 - Training: Getting Started at NERSC NERSC Oakland Scientific Facility 8:30 - Welcome - Richard Gerber, NERSC 9:00 - NERSC Computational and Storage Systems Overview, Charging - Harvey Wasserman, NERSC ( 30 min ) 9:30 - Connecting to NERSC and Transferring Data, David Turner, NERSC ( 30 min ) 10:00 - Accelerating X Applications Using NX, Yushu Yao, NERSC (20 min) 10:20-10:30 - Break

  10. Microsoft Word - 20111012_RAP Dec_Mtg_Topics.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    October12, 2011 1/2 Potential December RAP Committee Meeting Agenda Topics Topic/Purpose (incl. any framing questions) 2012 Priority? Issue Managers (* denotes lead) Agency Lead (s) Time Allocation 618-10&11 * Characterization (bottles) * Etc. TBD TBD TBD 60 min (30 min) 100 - K * What RAP will do based on review of Proposed Plan * River Corridor decisions - schedule * In situ technology development - status * Discuss potential concerns (advice points?) TBD TBD TBD 120 min Site-wide Permit *

  11. HTWOS and System Planning Briefing to DOE-HQ

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Waste Operations Simulator (HTWOS): A System Planning Tool Ted Hohl Linda Bergmann Jeremy Belsher Tom Crawford Tony Waldo System Planning & Modeling September 11, 2013 Agenda  System Planning Process (12 min)  Hanford Tank Waste Operations Simulator Model (15 min)  Demonstration (30 minutes)  Q&A (25 min) 2 SYSTEM PLANNING PROCESS 3 Mission Flowsheet - Simplified Process Flow Diagram 4 System Planning Inputs How do system models guide System Planning 5 RPP System Plan Risk

  12. Search for: All records | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    ... ; Shen, Min ; Jha, Abhishek ; et al Cancer cells engage in a metabolic program to ... properties of pyruvate kinase M2 (PKM2) influence altered glucose metabolism in cancer. ...

  13. Search for: All records | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    ... Filter Results Filter by Subject Filter by Author Collins, Kathleen (1) Hong, Kyungah (1) ... Zhixiong ; Min, Bosun ; Huang, Jing ; Hong, Kyungah ; Yang, Yuting ; Collins, ...

  14. Uramin Inc | Open Energy Information

    Open Energy Info (EERE)

    UraMin Inc. is an international mining company established to acquire and develop uranium properties throughout the world. Coordinates: 51.506325, -0.127144 Show Map...

  15. Search for: All records | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    Study of alinite cement hydration by impedance spectroscopy Kim, Young-Min ; Lee, ... the reagent grade chemicals. Their hydration behavior was compared with ordinary ...

  16. Office of Civil Rights NA-1.2 VIDEO LIBRARY Item Title

    National Nuclear Security Administration (NNSA)

    HR Training - Disability Discrimination And The Interactive Process 1 CD 54 min 2012 CCIconferencing.com 2 Requesting Fitnes-for-Duty Exams in the Federal Workplace: What's...

  17. Cloud Optical Properties from the Multifilter Shadowband Radiometer...

    Office of Scientific and Technical Information (OSTI)

    Min and Harrison (1996) developed an inversion method to infer the optical depth of liquid ... Multifilter Rotating Shadowband Radiometer (MFRSR) measurements (Harrison et al. 1994). ...

  18. ARM - Journal Articles 2003

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... ARM Min Photon path length distributions inferred from rotating shadowband spectrometer measurements at the Atmospheric Radiation Measurements Program Southern Great Plains site ...

  19. Microsoft Word - Stein_5AO 4_final.docx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ESTIMATING ANNUAL SYNCHRONIZED 1-MIN POWER OUTPUT PROFILES FROM UTILITY-SCALE PV PLANTS AT ... from large photovoltaic (PV) generation plants in locations where only hourly irradiance ...

  20. Search for: All records | DOE PAGES

    Office of Scientific and Technical Information (OSTI)

    Yin, Bangsheng ; Li, Siwei ; Li, Rui ; Min, Qilong ; Duan, Minzheng March 2015 , Elsevier Non-OH chemistry in oxidation flow reactors for the study of atmospheric chemistry ...