National Library of Energy BETA

Sample records for activity measurement toolkit

  1. NREL: International Activities - Geospatial Toolkits

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Geospatial Toolkit The Geospatial Toolkit is an NREL-developed map-based software application that integrates resource data and other geographic information systems (GIS) data for integrated resource assessment. The non-resource, country-specific data for each toolkit comes from a variety of agencies within each country as well as from global datasets. Funding for the toolkit was provided by the United States Agency for International Development (USAID), United States Trade and Development

  2. COR Toolkit

    Broader source: Energy.gov [DOE]

    The COR Toolkit cited in the attachments to Policy Flash 2012-25 and posted to/linked from various DOE Internet pages has been withdrawn until further notice.

  3. Financing Initiatives Toolkit | Open Energy Information

    Open Energy Info (EERE)

    Potential Toolkit Building Energy Assessment Toolkit Power System Screening and Design Toolkit Land Use Assessment Toolkit Bioenergy Assessment Toolkit Transportation...

  4. Development of an Online Toolkit for Measuring Commercial Building Energy Efficiency Performance -- Scoping Study

    SciTech Connect (OSTI)

    Wang, Na

    2013-03-13

    This study analyzes the market needs for building performance evaluation tools. It identifies the existing gaps and provides a roadmap for the U.S. Department of Energy (DOE) to develop a toolkit with which to optimize energy performance of a commercial building over its life cycle.

  5. Transport Activity Measurement Toolkit (TAMT) | Open Energy Informatio...

    Open Energy Info (EERE)

    Latin America and the Caribbean Region Sustainable Development Department Transport Cluster in conjunction with the World Bank's Environment-Climate Change (ENV-CC) Department...

  6. Local Toolkit

    Energy Science and Technology Software Center (OSTI)

    2007-05-31

    The LOCAL Toolkit contains tools and libraries developed under the LLNL LOCAL LDRD project for managing and processing large unstructured data sets primrily from parallel numerical simulations, such as triangular, tetrahedral, and hexahedral meshes, point sets, and graphs. The tools have three main functionalities: cache-coherent, linear ordering of multidimensional data; lossy and lossless data compression optimized for different data types; and an out-of-core streaming I/O library with simple processing modules for unstructed data.

  7. Agricultural Marketing Toolkit

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Agricultural-Marketing-Toolkit Sign In About | Careers | Contact | Investors | bpa.gov Search Policy & Reporting Expand Policy & Reporting EE Sectors Expand EE Sectors...

  8. Commercial Marketing Toolkit

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Commercial-Marketing-Toolkit Sign In About | Careers | Contact | Investors | bpa.gov Search Policy & Reporting Expand Policy & Reporting EE Sectors Expand EE Sectors Technology...

  9. LEDSGP/tools/toolkits | Open Energy Information

    Open Energy Info (EERE)

    Knowledge Portals LEDS Benefits Back to top LEDS-Related Toolkits DIA Toolkit This Development Impacts Assessment Toolkit helps country, regional, and local policymakers...

  10. Better Buildings Training Toolkit

    Broader source: Energy.gov [DOE]

    The Better Buildings Residential Network Training Toolkit can be used by residential energy efficiency programs interested in realizing the value of providing training opportunities for contractors, staff, and volunteers.

  11. Better Buildings Training Toolkit

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Training Toolkit BETTER BUILDINGS RESIDENTIAL NETWORK Learn more at betterbuildings.energy.gov/bbrn 1 T he Better Buildings Residential Network Training Toolkit can be used by residential energy efficiency programs interested in realizing the value of providing training opportunities for contractors, staff, and volunteers. For example, according to a comprehensive evaluation of more than 140 energy efficiency programs across the country that participated in a $500 million grant program,

  12. Structural Simulation Toolkit. Lunch & Learn

    SciTech Connect (OSTI)

    Moore, Branden J.; Voskuilen, Gwendolyn Renae; Rodrigues, Arun F.; Hammond, Simon David; Hemmert, Karl Scott

    2015-09-01

    This is a presentation outlining a lunch and learn lecture for the Structural Simulation Toolkit, supported by Sandia National Laboratories.

  13. The model coupling toolkit.

    SciTech Connect (OSTI)

    Larson, J. W.; Jacob, R. L.; Foster, I.; Guo, J.

    2001-04-13

    The advent of coupled earth system models has raised an important question in parallel computing: What is the most effective method for coupling many parallel models to form a high-performance coupled modeling system? We present our solution to this problem--The Model Coupling Toolkit (MCT). We explain how our effort to construct the Next-Generation Coupler for NCAR Community Climate System Model motivated us to create this toolkit. We describe in detail the conceptual design of the MCT and explain its usage in constructing parallel coupled models. We present preliminary performance results for the toolkit's parallel data transfer facilities. Finally, we outline an agenda for future development of the MCT.

  14. Water Security Toolkit

    Energy Science and Technology Software Center (OSTI)

    2012-09-11

    The Water Security Toolkit (WST) provides software for modeling and analyzing water distribution systems to minimize the potential impact of contamination incidents. WST wraps capabilities for contaminant transport, impact assessment, and sensor network design with response action plans, including source identification, rerouting, and decontamination, to provide a range of water security planning and real-time applications.

  15. Social Media Toolkit

    Broader source: Energy.gov [DOE]

    This Better Buildings Residential Network toolkit can be used to help residential energy efficiency programs learn to engage potential customers through social media. Social media can build brand awareness concerning home energy upgrades and the entities working on them, which can lead to more energy upgrade projects taking place in the long run.

  16. Geospatial Toolkit | Open Energy Information

    Open Energy Info (EERE)

    Laboratory (NREL). It integrates resource data and geographic information systems (GIS) - for integrated resource assessment. The Geospatial Toolkit (GsT) is a map-based...

  17. REEEP Toolkits | Open Energy Information

    Open Energy Info (EERE)

    Policiesdeployment programs, Resource assessment, Pathways analysis, Background analysis Resource Type: Dataset References: REEEP Toolkit 1 This article is a stub. You...

  18. Bioenergy Toolkit | Open Energy Information

    Open Energy Info (EERE)

    Bioenergy Toolkit Jump to: navigation, search Stage 3 LEDS Home Introduction to Framework Assess current country plans, policies, practices, and capacities DevelopBAU Stage 4:...

  19. Building Energy Assessment Toolkit | Open Energy Information

    Open Energy Info (EERE)

    Opportunities 3b.1. Assess technical potential for sector technologies Renewable Energy Technical Potential Toolkit Building Energy Assessment Toolkit Power System Screening...

  20. Impact Assessment Toolkit | Open Energy Information

    Open Energy Info (EERE)

    Opportunities 3b.1. Assess technical potential for sector technologies Renewable Energy Technical Potential Toolkit Building Energy Assessment Toolkit Power System Screening...

  1. Supporting Small Forest Enterprises: A Facilitator's Toolkit...

    Open Energy Info (EERE)

    Small Forest Enterprises: A Facilitator's Toolkit Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Supporting Small Forest Enterprises: A Facilitator's Toolkit Agency...

  2. Multiphysics Application Coupling Toolkit

    Energy Science and Technology Software Center (OSTI)

    2013-12-02

    This particular consortium implementation of the software integration infrastructure will, in large part, refactor portions of the Rocstar multiphysics infrastructure. Development of this infrastructure originated at the University of Illinois DOE ASCI Center for Simulation of Advanced Rockets (CSAR) to support the center's massively parallel multiphysics simulation application, Rocstar, and has continued at IllinoisRocstar, a small company formed near the end of the University-based program. IllinoisRocstar is now licensing these new developments as free, openmore » source, in hopes to help improve their own and others' access to infrastructure which can be readily utilized in developing coupled or composite software systems; with particular attention to more rapid production and utilization of multiphysics applications in the HPC environment. There are two major pieces to the consortium implementation, the Application Component Toolkit (ACT), and the Multiphysics Application Coupling Toolkit (MPACT). The current development focus is the ACT, which is (will be) the substrate for MPACT. The ACT itself is built up from the components described in the technical approach. In particular, the ACT has the following major components: 1.The Component Object Manager (COM): The COM package provides encapsulation of user applications, and their data. COM also provides the inter-component function call mechanism. 2.The System Integration Manager (SIM): The SIM package provides constructs and mechanisms for orchestrating composite systems of multiply integrated pieces.« less

  3. Mesh Quality Improvement Toolkit

    Energy Science and Technology Software Center (OSTI)

    2002-11-15

    MESQUITE is a linkable software library to be used by simulation and mesh generation tools to improve the quality of meshes. Mesh quality is improved by node movement and/or local topological modifications. Various aspects of mesh quality such as smoothness, element shape, size, and orientation are controlled by choosing the appropriate mesh qualtiy metric, and objective function tempate, and a numerical optimization solver to optimize the quality of meshes, MESQUITE uses the TSTT mesh interfacemore » specification to provide an interoperable toolkit that can be used by applications which adopt the standard. A flexible code design makes it easy for meshing researchers to add additional mesh quality metrics, templates, and solvers to develop new quality improvement algorithms by making use of the MESQUITE infrastructure.« less

  4. TOOLKIT FOR ADVANCED OPTIMIZATION

    Energy Science and Technology Software Center (OSTI)

    2000-10-13

    The TAO project focuses on the development of software for large scale optimization problems. TAO uses an object-oriented design to create a flexible toolkit with strong emphasis on the reuse of external tools where appropriate. Our design enables bi-directional connection to lower level linear algebra support (for example, parallel sparse matrix data structures) as well as higher level application frameworks. The Toolkist for Advanced Optimization (TAO) is aimed at teh solution of large-scale optimization problemsmore » on high-performance architectures. Our main goals are portability, performance, scalable parallelism, and an interface independent of the architecture. TAO is suitable for both single-processor and massively-parallel architectures. The current version of TAO has algorithms for unconstrained and bound-constrained optimization.« less

  5. SEP Toolkit Overview | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    SEP Toolkit Overview SEP Toolkit Overview PDF icon Overview.pdf More Documents & Publications Industrial SEP Ratepayer-funded Accelerator Factsheet SEP Overview Slides How Industrial Energy Efficiency Can Support State Climate and Energy Planning

  6. Voluntary Initiative: Partnerships Toolkit | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    PDF icon Voluntary Initiative: Partnerships Toolkit More Documents & Publications Better Buildings Residential Program Solution Center Demonstration Webinar Stakeholder Mapping: ...

  7. Graph algorithms in the titan toolkit.

    SciTech Connect (OSTI)

    McLendon, William Clarence, III; Wylie, Brian Neil

    2009-10-01

    Graph algorithms are a key component in a wide variety of intelligence analysis activities. The Graph-Based Informatics for Non-Proliferation and Counter-Terrorism project addresses the critical need of making these graph algorithms accessible to Sandia analysts in a manner that is both intuitive and effective. Specifically we describe the design and implementation of an open source toolkit for doing graph analysis, informatics, and visualization that provides Sandia with novel analysis capability for non-proliferation and counter-terrorism.

  8. Local Government Community Solar Toolkit

    Broader source: Energy.gov [DOE]

    Community solar gardens can be an excellent opportunity for cities, counties, and other local governments to get involved in solar energy and engage community members. This toolkit has been created by Clean Energy Resource Teams to help consumers learn more about community solar.

  9. Parallel Power Grid Simulation Toolkit

    Energy Science and Technology Software Center (OSTI)

    2015-09-14

    ParGrid is a 'wrapper' that integrates a coupled Power Grid Simulation toolkit consisting of a library to manage the synchronization and communication of independent simulations. The included library code in ParGid, named FSKIT, is intended to support the coupling multiple continuous and discrete even parallel simulations. The code is designed using modern object oriented C++ methods utilizing C++11 and current Boost libraries to ensure compatibility with multiple operating systems and environments.

  10. 2030 District Program and Small Commercial Toolkit

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... Districts act as a concierge and GP - pointing partners towards tools for accurate diagnosis and treatment 22 2030 Districts 23 Small Commercial Toolkit: Web Resource Landscape ...

  11. Sustainable Forest Finance Toolkit | Open Energy Information

    Open Energy Info (EERE)

    "This Toolkit has been developed jointly by PricewaterhouseCoopers (PwC) and the World Business Council for Sustainable Development (WBCSD). It is a globally applicable resource...

  12. TransportToolkit Prototype | Open Energy Information

    Open Energy Info (EERE)

    AgencyCompany Organization: Nick Langle ComplexityEase of Use: Not Available Cost: Free Transport Toolkit Region(s): Asia, Europe, Africa & Middle East, Australia & North...

  13. WPN 10-3: Procurement Toolkit CD

    Broader source: Energy.gov [DOE]

    To issue the Procurement Toolkit CD to all Grantees, to share with their local agencies, for use in the Weatherization Assistance Program.

  14. Category:LEDS Toolkit | Open Energy Information

    Open Energy Info (EERE)

    meant to support the creation and implementation of a Low Emission Development Strategy. Pages in category "LEDS Toolkit" The following 14 pages are in this category, out of...

  15. Better Buildings Training Toolkit | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    The Better Buildings Residential Network Training Toolkit can be used by residential energy efficiency programs interested in realizing the value of providing training ...

  16. Workplace Charging Toolkit: Workshop Outreach Presentation Template...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Outreach Presentation Template Workplace Charging Toolkit: Workshop Outreach Presentation Template Educate workshop attendees and employers about the benefits of workplace charging ...

  17. Workplace Charging Toolkit: Workshop Speaker Instruction Letter...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Workplace Charging Toolkit: Workshop Speaker Instruction Letter Template Inform speakers participating in the employer experience panel about their role in the event. File General ...

  18. Industrial Ratepayer-Funded SEP Toolkit | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Superior Energy Performance Industrial Ratepayer-Funded SEP Toolkit Industrial Ratepayer-Funded SEP Toolkit The Industrial Superior Energy Performance (SEP(tm)) Accelerator is ...

  19. LEDSGP/Transportation Toolkit/Contact Us | Open Energy Information

    Open Energy Info (EERE)

    Contact Us < LEDSGP | Transportation Toolkit Jump to: navigation, search LEDSGP Logo.png Transportation Toolkit Home Tools Training Request Assistance Contacts for the LEDS GP...

  20. Cyber Security Audit and Attack Detection Toolkit: National SCADA...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Cyber Security Audit and Attack Detection Toolkit: National SCADA Test Bed May 2008 This project of the cyber security audit and attack detection toolkit is adding control system ...

  1. Technology Cost and Performance Toolkit | Open Energy Information

    Open Energy Info (EERE)

    Opportunities 3b.1. Assess technical potential for sector technologies Renewable Energy Technical Potential Toolkit Building Energy Assessment Toolkit Power System Screening...

  2. Policy and Program Design Toolkit | Open Energy Information

    Open Energy Info (EERE)

    Opportunities 3b.1. Assess technical potential for sector technologies Renewable Energy Technical Potential Toolkit Building Energy Assessment Toolkit Power System Screening...

  3. Climate Change and Clean Energy Project (CEnergy) Toolkit | Open...

    Open Energy Info (EERE)

    Project (CEnergy) Toolkit Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Climate Change and Clean Energy Project (CEnergy) Toolkit AgencyCompany Organization:...

  4. LEDSGP/Transportation Toolkit/Tools | Open Energy Information

    Open Energy Info (EERE)

    Toolkit Jump to: navigation, search LEDSGP Logo.png Transportation Toolkit Home Tools Training Request Assistance Tools for Low Emission Development Strategies in Transportation...

  5. Transportation Assessment Toolkit/Home | Open Energy Information

    Open Energy Info (EERE)

    Transport Bikes in Spain Toolkit for Low Emissions Development Strategies in Transport Red buses Toolkit for Low Emissions Development Strategies in Transport A Rationale and...

  6. Galvin Electricity Initiative Policy Toolkit | Open Energy Information

    Open Energy Info (EERE)

    Galvin Electricity Initiative Policy Toolkit Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Galvin Electricity Initiative Policy Toolkit AgencyCompany Organization:...

  7. A targeted proteomics toolkit for high-throughput absolute quantificat...

    Office of Scientific and Technical Information (OSTI)

    targeted proteomics toolkit for high-throughput absolute quantification of Escherichia coli proteins Citation Details In-Document Search Title: A targeted proteomics toolkit for ...

  8. Renewable Energy and Energy Efficiency Toolkit Website | Open...

    Open Energy Info (EERE)

    Toolkit Website Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Renewable Energy and Energy Efficiency Toolkit Website Focus Area: Renewable Energy Topics: Policy...

  9. Project Screening and Design Toolkit | Open Energy Information

    Open Energy Info (EERE)

    Opportunities 3b.1. Assess technical potential for sector technologies Renewable Energy Technical Potential Toolkit Building Energy Assessment Toolkit Power System Screening...

  10. BioenergizeME Virtual Toolkit

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    139 | published 9/22/15 BioenergizeME Infographic Challenge Toolkit B i o e n e r g i z e M E U . S . D E P A R T M ENT O F E N E R G Y O P E R A T I O N B i o e n e r g i z e M E U . S . D E P A R T M ENT O F E N E R G Y Developing future leaders who will determine the bioenergy landscape of tomorrow DOE/EE-1139 | published 9/22/15 TABLE OF CONTENTS 1 INTRODUCTION ................................................................................................... 2 Why Bioenergy? Why Now?

  11. Python-ARM Radar Toolkit

    Energy Science and Technology Software Center (OSTI)

    2013-03-17

    The Python-ARM Radar Toolkit (Py-ART) is a collection of radar quality control and retrieval codes which all work on two unifying Python objects: the PyRadar and PyGrid objects. By building ingests to several popular radar formats and then abstracting the interface Py-ART greatly simplifies data processing over several other available utilities. In addition Py-ART makes use of Numpy arrays as its primary storage mechanism enabling use of existing and extensive community software tools.

  12. Workplace Charging Toolkit: Outreach Letter Template | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Outreach Letter Template Workplace Charging Toolkit: Outreach Letter Template Reach out to employers in your community who may be interested in offering workplace charging with this template. File General Outreach Letter Template File Clean Cities Branded Outreach Letter Template More Documents & Publications Workplace Charging Toolkit: Workshop Host Outreach Letter Template Workplace Charging Toolkit: Workshop Speaker Outreach Letter Template Workplace Charging Toolkit: Workshop Speaker

  13. Workplace Charging Toolkit: Workshop Invitation Template | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Invitation Template Workplace Charging Toolkit: Workshop Invitation Template Engage possible workplace charging event attendees with this template invitation. File General Workshop Invitation Template File Clean Cities Branded Workshop Invitation Template More Documents & Publications Workplace Charging Toolkit: Workshop Speaker Outreach Letter Template Workplace Charging Toolkit: Workshop Agenda Template Workplace Charging Toolkit: Workshop Host Outreach

  14. BioenergizeME Infographic Challenge Toolkit | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Toolkit BioenergizeME Infographic Challenge Toolkit Toolkit for the BioenergizeME Infographic Challenge. PDF icon bioenergizeme_toolkit.pdf More Documents & Publications Webinar: BioenergizeME Office Hours Webinar: Guide to the 2016 BioenergizeME Infographic Challenge BioenergizeME Infographic Challenge Flyer Webinar: BioenergizeME Office Hours Webinar: Biomass Basics

  15. Better Buildings Residential Network Social Media Toolkit

    Energy Savers [EERE]

    Social Media Toolkit BETTER BUILDINGS RESIDENTIAL NETWORK Learn more at betterbuildings.energy.gov/bbrn 1 T his Better Buildings Residential Network toolkit can be used to help residential energy efficiency programs learn to engage potential customers through social media. Social media can build brand awareness concerning home energy upgrades and the entities working on them, which can lead to more energy upgrade projects taking place in the long run. Residential Network members provided input

  16. Modeling of a Flooding Induced Station Blackout for a Pressurized Water Reactor Using the RISMC Toolkit

    SciTech Connect (OSTI)

    Mandelli, Diego; Prescott, Steven R; Smith, Curtis L; Alfonsi, Andrea; Rabiti, Cristian; Cogliati, Joshua J; Kinoshita, Robert A

    2011-07-01

    In the Risk Informed Safety Margin Characterization (RISMC) approach we want to understand not just the frequency of an event like core damage, but how close we are (or are not) to key safety-related events and how might we increase our safety margins. The RISMC Pathway uses the probabilistic margin approach to quantify impacts to reliability and safety by coupling both probabilistic (via stochastic simulation) and mechanistic (via physics models) approaches. This coupling takes place through the interchange of physical parameters and operational or accident scenarios. In this paper we apply the RISMC approach to evaluate the impact of a power uprate on a pressurized water reactor (PWR) for a tsunami-induced flooding test case. This analysis is performed using the RISMC toolkit: RELAP-7 and RAVEN codes. RELAP-7 is the new generation of system analysis codes that is responsible for simulating the thermal-hydraulic dynamics of PWR and boiling water reactor systems. RAVEN has two capabilities: to act as a controller of the RELAP-7 simulation (e.g., system activation) and to perform statistical analyses (e.g., run multiple RELAP-7 simulations where sequencing/timing of events have been changed according to a set of stochastic distributions). By using the RISMC toolkit, we can evaluate how power uprate affects the system recovery measures needed to avoid core damage after the PWR lost all available AC power by a tsunami induced flooding. The simulation of the actual flooding is performed by using a smooth particle hydrodynamics code: NEUTRINO.

  17. NYSERDA-Wind Energy Toolkit | Open Energy Information

    Open Energy Info (EERE)

    NYSERDA-Wind Energy Toolkit Jump to: navigation, search Tool Summary LAUNCH TOOL Name: NYSERDA-Wind Energy Toolkit AgencyCompany Organization: New York State Energy Research and...

  18. NOAA Webinar: The U.S. Climate Resilience Toolkit

    Broader source: Energy.gov [DOE]

    Hosted by the National Oceanic and Atmospheric Administration (NOAA), this webinar will demonstrate the U.S. Climate Resilience Toolkit.

  19. ORISE: Radiological Terrorism Toolkit | How ORISE is Making a Difference

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Radiological Terrorism Toolkit ORISE partners with CDC to develop Radiological Terrorism: A Toolkit for Public Health Officials Radiological Terrorism: A Toolkit for Public Health Officials How ORISE is Making a Difference Working closely with the Centers for Disease Control and Prevention (CDC), the Oak Ridge Institute for Science and Education (ORISE) distributed more than 400 radiological terrorism toolkits filled with key resources, such as training guidelines, clinical directives, details

  20. Workplace Charging Toolkit: Workshop Speaker Instruction Letter Template |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Instruction Letter Template Workplace Charging Toolkit: Workshop Speaker Instruction Letter Template Inform speakers participating in the employer experience panel about their role in the event. File General Speaker Instruction Letter Template File Clean Cities Branded Speaker Instruction Letter Template More Documents & Publications Workplace Charging Toolkit: Workshop Speaker Outreach Letter Template Workplace Charging Toolkit: Workshop Host Outreach

  1. Workplace Charging Toolkit: Workshop Speaker Outreach Letter Template |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Outreach Letter Template Workplace Charging Toolkit: Workshop Speaker Outreach Letter Template Invite employers in your community that already have charging to speak on an employer experience panel. File General Speaker Outreach Letter Template File Clean Cities Branded Speaker Outreach Letter Template More Documents & Publications Workplace Charging Toolkit: Workshop Host Outreach Letter Template Workplace Charging Toolkit: Workshop Speaker Instruction

  2. LBNL: Architecture 2030 District Program and Small Commercial Toolkit |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Architecture 2030 District Program and Small Commercial Toolkit LBNL: Architecture 2030 District Program and Small Commercial Toolkit LBNL: Architecture 2030 District Program and Small Commercial Toolkit Lead Performer: Lawrence Berkeley National Laboratory - Berkeley, CA Partners: - Architecture 2030 - Santa Fe, NM - Cleveland 2030 District - Cleveland, OH - Green Building Alliance/Pittsburgh 2030 District - Pittsburgh, PA - Seattle 2030 District - Seattle, WA -

  3. SIERRA Toolkit v. 1.0

    Energy Science and Technology Software Center (OSTI)

    2010-02-24

    The SIERRA Toolkit is a collection of libraries to facilitate the development of parallel engineering analysis applications. These libraries supply basic core services that an engineering analysis application may need such as a parallel distributed and dynamic mesh database (for unstructured meshes), mechanics algorithm support (parallel infrastructure only), interfaces to parallel solvers, parallel mesh and data I/O, and various utilities (timers, diagnostic tools, etc.).The toolkit is intended to reduce the effort required to develop anmore » engineering analysis application by removing the need to develop core capabilities that most every application would require.« less

  4. Portable Extensible Toolkit for Scientific Computation

    Energy Science and Technology Software Center (OSTI)

    1995-06-30

    PETSC2.0 is a software toolkit for portable, parallel (and serial) numerical solution of partial differential equations and minimization problems. It includes software for the solution of linear and nonlinear systems of equations. These codes are written in a data-structure-neutral manner to enable easy reuse and flexibility.

  5. A toolkit for building earth system models

    SciTech Connect (OSTI)

    Foster, I.

    1993-03-01

    An earth system model is a computer code designed to simulate the interrelated processes that determine the earth's weather and climate, such as atmospheric circulation, atmospheric physics, atmospheric chemistry, oceanic circulation, and biosphere. I propose a toolkit that would support a modular, or object-oriented, approach to the implementation of such models.

  6. A toolkit for building earth system models

    SciTech Connect (OSTI)

    Foster, I.

    1993-03-01

    An earth system model is a computer code designed to simulate the interrelated processes that determine the earth`s weather and climate, such as atmospheric circulation, atmospheric physics, atmospheric chemistry, oceanic circulation, and biosphere. I propose a toolkit that would support a modular, or object-oriented, approach to the implementation of such models.

  7. ARM - Measurement - Photosynthetically Active Radiation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    radiation from 400 to 700 nanometers that photosynthetic organisms are able to use in the process of photosynthesis Categories Radiometric Instruments The above measurement is...

  8. A toolkit for detecting technical surprise.

    SciTech Connect (OSTI)

    Trahan, Michael Wayne; Foehse, Mark C.

    2010-10-01

    The detection of a scientific or technological surprise within a secretive country or institute is very difficult. The ability to detect such surprises would allow analysts to identify the capabilities that could be a military or economic threat to national security. Sandia's current approach utilizing ThreatView has been successful in revealing potential technological surprises. However, as data sets become larger, it becomes critical to use algorithms as filters along with the visualization environments. Our two-year LDRD had two primary goals. First, we developed a tool, a Self-Organizing Map (SOM), to extend ThreatView and improve our understanding of the issues involved in working with textual data sets. Second, we developed a toolkit for detecting indicators of technical surprise in textual data sets. Our toolkit has been successfully used to perform technology assessments for the Science & Technology Intelligence (S&TI) program.

  9. Knowledge information management toolkit and method

    DOE Patents [OSTI]

    Hempstead, Antoinette R.; Brown, Kenneth L.

    2006-08-15

    A system is provided for managing user entry and/or modification of knowledge information into a knowledge base file having an integrator support component and a data source access support component. The system includes processing circuitry, memory, a user interface, and a knowledge base toolkit. The memory communicates with the processing circuitry and is configured to store at least one knowledge base. The user interface communicates with the processing circuitry and is configured for user entry and/or modification of knowledge pieces within a knowledge base. The knowledge base toolkit is configured for converting knowledge in at least one knowledge base from a first knowledge base form into a second knowledge base form. A method is also provided.

  10. Application experiences with the Globus toolkit.

    SciTech Connect (OSTI)

    Brunett, S.

    1998-06-09

    The Globus grid toolkit is a collection of software components designed to support the development of applications for high-performance distributed computing environments, or ''computational grids'' [14]. The Globus toolkit is an implementation of a ''bag of services'' architecture, which provides application and tool developers not with a monolithic system but rather with a set of stand-alone services. Each Globus component provides a basic service, such as authentication, resource allocation, information, communication, fault detection, and remote data access. Different applications and tools can combine these services in different ways to construct ''grid-enabled'' systems. The Globus toolkit has been used to construct the Globus Ubiquitous Supercomputing Testbed, or GUSTO: a large-scale testbed spanning 20 sites and included over 4000 compute nodes for a total compute power of over 2 TFLOPS. Over the past six months, we and others have used this testbed to conduct a variety of application experiments, including multi-user collaborative environments (tele-immersion), computational steering, distributed supercomputing, and high throughput computing. The goal of this paper is to review what has been learned from these experiments regarding the effectiveness of the toolkit approach. To this end, we describe two of the application experiments in detail, noting what worked well and what worked less well. The two applications are a distributed supercomputing application, SF-Express, in which multiple supercomputers are harnessed to perform large distributed interactive simulations; and a tele-immersion application, CAVERNsoft, in which the focus is on connecting multiple people to a distributed simulated world.

  11. Download Sandia's Microgrid Design Toolkit (MDT)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Sandia's Microgrid Design Toolkit (MDT) - Sandia Energy Energy Search Icon Sandia Home Locations Contact Us Employee Locator Energy & Climate Secure & Sustainable Energy Future Stationary Power Energy Conversion Efficiency Solar Energy Wind Energy Water Power Supercritical CO2 Geothermal Natural Gas Safety, Security & Resilience of the Energy Infrastructure Energy Storage Nuclear Power & Engineering Grid Modernization Battery Testing Nuclear Fuel Cycle Defense Waste Management

  12. Advanced Network Toolkit for Assessments

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... Phase 1: Data Storage and Retrieval Algorithm * Restructured ANTFARM source code to utilize the ActiveRecord library for the Ruby programming language, allowing easy insertion of ...

  13. Supply Chain Risk Management (SCRM) Awareness Toolkit | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Supply Chain Risk Management (SCRM) Awareness Toolkit Supply Chain Risk Management (SCRM) Awareness Toolkit The Office of the Chief Information Officer (OCIO) Supply Chain Risk Management (SCRM) Resource Center developed the SCRM Awareness Toolkit to introduce DOE employees to the basic terms and concepts of the technology supply chain and associated threats. For additional information on the DOE Enterprise SCRM Resource Center and program initiatives, please contact Sue Farrand at

  14. Voluntary Initiative on Incentives: Toolkit Training Webinar | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy Initiative on Incentives: Toolkit Training Webinar Voluntary Initiative on Incentives: Toolkit Training Webinar Better Buildings Residential Network Peer Exchange Call Series: Voluntary Initiative on Incentives: Toolkit Training Webinar, Call Slides and Discussion Summary, March 26, 2015. PDF icon Call Slides and Discussion Summary More Documents & Publications Generating Energy Efficiency Project Leads and Allocating Leads to Contractors Making Evaluations Work for Your

  15. Voluntary Initiative: Designing Incentives Toolkit | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Initiative: Designing Incentives Toolkit Voluntary Initiative: Designing Incentives Toolkit Design incentives that motivate potential customers to act by lowering the risk, decreasing the cost, or offering additional benefits of home energy upgrades. PDF icon Voluntary Initiative: Designing Incentives Toolkit More Documents & Publications Spotlight on Austin, Texas: Let Your Contractor Be Your Guide for Big Rewards Spotlight on Austin, Texas: Best Offer Ever Produces 564 Upgrades in Record

  16. Workplace Charging Toolkit: Press Release Template | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Press Release Template Workplace Charging Toolkit: Press Release Template Raise the profile of employers in the community who are offering workplace charging and encourage the adoption of workplace charging among other employers through this press release template. File General Press Release Template File Clean Cities Branded Press Release Template More Documents & Publications Workplace Charging Toolkit: Workshop Speaker Outreach Letter Template Workplace Charging Toolkit: Outreach Letter

  17. LEDSGP/DIA-Toolkit/Request Assistance | Open Energy Information

    Open Energy Info (EERE)

    Impacts Assessment Toolkit Home Tools Request Assistance Remote Expert Assistance on LEDS The Low Emission Development Strategies (LEDS) Global Partnership provides timely,...

  18. ORISE: Radiological Terrorism Toolkit | How ORISE is Making a...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Education (ORISE) distributed more than 400 radiological terrorism toolkits filled with key resources, such as training guidelines, clinical directives, details about radioactive...

  19. LEDSGP/DIA-Toolkit/Uses | Open Energy Information

    Open Energy Info (EERE)

    (DIA) Toolkit offers a structured way to consider the impact of proposed low emission development strategies (LEDS) on other national or local priorities, and provides links to...

  20. WRI-The Governance of Forests Toolkit | Open Energy Information

    Open Energy Info (EERE)

    Publications Website: pdf.wri.orgworkingpapersgfitenureindicatorssep09.pdf Cost: Free WRI-The Governance of Forests Toolkit Screenshot References: WRI-The Governance of...

  1. Regulatory and Permitting Information Desktop Toolkit (Fact Sheet)

    SciTech Connect (OSTI)

    Young, K.

    2014-04-01

    Overview of DOE's Regulatory and Permitting Information Desktop (RAPID) Toolkit project, providing information on where to go to view documents and who to contact to get involved.

  2. Workplace Charging Toolkit: Workshop Host Outreach Letter Template...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Host Outreach Letter Template Workplace Charging Toolkit: Workshop Host Outreach Letter Template Approach employers in your community that already have workplace charging to serve ...

  3. Grid-Connected Renewable Energy Generation Toolkit-Biomass |...

    Open Energy Info (EERE)

    Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Grid-Connected Renewable Energy Generation Toolkit-Biomass AgencyCompany Organization: United States Agency for...

  4. Geospatial Toolkit (GsT) Webinar | Open Energy Information

    Open Energy Info (EERE)

    wikiGsT Equivalent URI: cleanenergysolutions.orgcontentgeospatial-toolkit-gst Language: English Policies: Deployment Programs DeploymentPrograms: Technical Assistance...

  5. Integrated: Geospatial Toolkit GIS data for Oaxaca from NREL...

    Open Energy Info (EERE)

    show good potential for renewable energy projects. The toolkit displays renewable energy data along with information about the geography, location of population centers,...

  6. Integrated: Geospatial Toolkit GIS data for India from NREL ...

    Open Energy Info (EERE)

    show good potential for renewable energy projects. The toolkit displays renewable energy data along with information about the geography, location of population centers,...

  7. ACHP - Section 106 Applicant Toolkit | Open Energy Information

    Open Energy Info (EERE)

    search OpenEI Reference LibraryAdd to library PermittingRegulatory Guidance - GuideHandbook: ACHP - Section 106 Applicant ToolkitPermittingRegulatory GuidanceGuide...

  8. Integrated: Geospatial Toolkit GIS data for Nicaragua from NREL...

    Open Energy Info (EERE)

    Nicaragua from NREL (Abstract): Geographic Information Systems (GIS) data intended for use in the Geospatial toolkit or with any GIS software. (Purpose): The Solar and Wind Energy...

  9. Integrated: Geospatial Toolkit GIS data for Cuba from NREL -...

    Open Energy Info (EERE)

    Cuba from NREL (Abstract): Geographic Information Systems (GIS) data intended for use in the Geospatial toolkit or with any GIS software. (Purpose): The Solar and Wind Energy...

  10. Category:Wind Working Group Toolkit | Open Energy Information

    Open Energy Info (EERE)

    search This wiki-based Wind Working Group Toolkit provides links to information, methods, and resources. This wiki is a work in progress, and we welcome your contributions....

  11. ORISE: Pandemic Flu Toolkits | How ORISE is Making a Difference

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    workshops that have been presented to the Asia-Pacific Economic Cooperation (APEC) and other nations around the world. By developing training toolkits and providing...

  12. Distributed Renewable Energy Finance and Policy Toolkit | Open...

    Open Energy Info (EERE)

    Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Distributed Renewable Energy Finance and Policy Toolkit AgencyCompany Organization: Clean Energy States Alliance...

  13. An Incident Management Preparedness and Coordination Toolkit

    SciTech Connect (OSTI)

    Koch, Daniel B; Payne, Patricia W

    2012-01-01

    Although the use of Geographic Information Systems (GIS) by centrally-located operations staff is well established in the area of emergency response, utilization by first responders in the field is uneven. Cost, complexity, and connectivity are often the deciding factors preventing wider adoption. For the past several years, Oak Ridge National Laboratory (ORNL) has been developing a mobile GIS solution using free and open-source software targeting the needs of front-line personnel. Termed IMPACT, for Incident Management Preparedness and Coordination Toolkit, this ORNL application can complement existing GIS infrastructure and extend its power and capabilities to responders first on the scene of a natural or man-made disaster.

  14. Parallel Climate Analysis Toolkit (ParCAT)

    Energy Science and Technology Software Center (OSTI)

    2013-06-30

    The parallel analysis toolkit (ParCAT) provides parallel statistical processing of large climate model simulation datasets. ParCAT provides parallel point-wise average calculations, frequency distributions, sum/differences of two datasets, and difference-of-average and average-of-difference for two datasets for arbitrary subsets of simulation time. ParCAT is a command-line utility that can be easily integrated in scripts or embedded in other application. ParCAT supports CMIP5 post-processed datasets as well as non-CMIP5 post-processed datasets. ParCAT reads and writes standard netCDF files.

  15. MCS Large Cluster Systems Software Toolkit

    Energy Science and Technology Software Center (OSTI)

    2002-11-01

    This package contains a number of systems utilities for managing a set of computers joined in a "cluster". The utilities assist a team of systems administrators in managing the cluster by automating routine tasks, centralizing information, and monitoring individual computers within the cluster. Included in the toolkit are scripts used to boot a computer from a floppy, a program to turn on and off the power to a system, and a system for using amore » database to organize cluster information.« less

  16. WAP Memorandum 015: Weatherization Financial Toolkit – 2 CFR 200 Regulations and Procurement Procedures

    Broader source: Energy.gov [DOE]

    This Memorandum serves to update and supersede the Financial Toolkit, previously issued in Weatherization Program Notice (WPN) 12-4, Weatherization Assistance Program Financial Management Training Toolkit dated December 9, 2011, and the Procurement Toolkit previously issued in WPN 10-3, Procurement Toolkit CD, dated October 30, 2009.

  17. Monitoring Extreme-scale Lustre Toolkit

    SciTech Connect (OSTI)

    Brim, Michael J; Lothian, Josh

    2015-01-01

    We discuss the design and ongoing development of the Monitoring Extreme-scale Lustre Toolkit (MELT), a unified Lustre performance monitoring and analysis infrastructure that provides continuous, low-overhead summary information on the health and performance of Lustre, as well as on-demand, in-depth problem diagnosis and root-cause analysis. The MELT infrastructure leverages a distributed overlay network to enable monitoring of center-wide Lustre filesystems where clients are located across many network domains. We preview interactive command-line utilities that help administrators and users to observe Lustre performance at various levels of resolution, from individual servers or clients to whole filesystems, including job-level reporting. Finally, we discuss our future plans for automating the root-cause analysis of common Lustre performance problems.

  18. TEVA-SPOT Toolkit 1.2

    Energy Science and Technology Software Center (OSTI)

    2007-07-26

    The TEVA-SPOT Toolkit (SPOT) supports the design of contaminant warning systems (CWSs) that use real-time sensors to detect contaminants in municipal water distribution networks. Specifically, SPOT provides the capability to select the locations for installing sensors in order to maximize the utility and effectiveness of the CWS. SPOT models the sensor placement process as an optimization problem, and the user can specify a wide range of performance objectives for contaminant warning system design, including populationmore » health effects, time to detection, extent of contamination, volume consumed and number of failed detections. For example, a SPOT user can integrate expert knowledge during the design process by specigying required sensor placements or designating network locations as forbidden. Further, cost considerations can be integrated by limiting the design with user-specified installation costs at each location.« less

  19. Data Exploration Toolkit for serial diffraction experiments

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Zeldin, Oliver B.; Brewster, Aaron S.; Hattne, Johan; Uervirojnangkoorn, Monarin; Lyubimov, Artem Y.; Zhou, Qiangjun; Zhao, Minglei; Weis, William I.; Sauter, Nicholas K.; Brunger, Axel T.

    2015-01-23

    Ultrafast diffraction at X-ray free-electron lasers (XFELs) has the potential to yield new insights into important biological systems that produce radiation-sensitive crystals. An unavoidable feature of the 'diffraction before destruction' nature of these experiments is that images are obtained from many distinct crystals and/or different regions of the same crystal. Combined with other sources of XFEL shot-to-shot variation, this introduces significant heterogeneity into the diffraction data, complicating processing and interpretation. To enable researchers to get the most from their collected data, a toolkit is presented that provides insights into the quality of, and the variation present in, serial crystallography datamore » sets. These tools operate on the unmerged, partial intensity integration results from many individual crystals, and can be used on two levels: firstly to guide the experimental strategy during data collection, and secondly to help users make informed choices during data processing.« less

  20. Solar for Safety, Security, and Resilience Toolkit

    Broader source: Energy.gov [DOE]

    There is a growing interest in using renewable energy options like solar to improve community resiliency. During extreme weather events, solar can help prevent power outages by providing emergency energy to critical facilities and recovery efforts. Solar can provide electricity to remote or less accessible areas, and is flexible enough to be a mobile or temporary power source. In addition to resiliency planning, there are efforts to promote new safety education and guidelines for solar installation, especially related to fire prevention. Also, there is rising interest in how solar can influence homeland security. The Solar for Safety, Security, and Resilience Toolkit demonstrates the different ways of thinking about and incorporating solar energy into ongoing public safety, homeland security, and resiliency initiatives.

  1. Integrated: Geospatial Toolkit for Honduras from NREL - Datasets...

    Open Energy Info (EERE)

    and easy to use geographic toolkit that allows non-GIS users to relate the renewable energy resource (solar and wind) data to other geographic data, such as land use, protected...

  2. Template:RegulatoryToolkitHeader | Open Energy Information

    Open Energy Info (EERE)

    Toolkit banner, typically across the top of the page, which features a unique blue color scheme and simple menu. Parameters none Usage It should be called in the following...

  3. Workplace Charging Toolkit: Workshop Outreach Templates | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Toolkit: Workshop Outreach Templates Workplace Charging Toolkit: Workshop Outreach Templates These templates have been developed based on lessons learned from more than 20 employer workplace charging events held across the U.S. between 2013 and 2015. Workshop Agenda Template - Develop a streamlined workshop with this half-day agenda focused on introductory-level PEV education and firsthand employer workplace charging experience. Workshop Host Outreach Letter Template - Approach

  4. The structural simulation toolkit : a tool for bridging the

    Office of Scientific and Technical Information (OSTI)

    architectural/microarchitectural evaluation gap. (Conference) | SciTech Connect The structural simulation toolkit : a tool for bridging the architectural/microarchitectural evaluation gap. Citation Details In-Document Search Title: The structural simulation toolkit : a tool for bridging the architectural/microarchitectural evaluation gap. Abstract not provided. Authors: Murphy, Richard. ; Rodrigues, Arun F. ; Kogge, Peter [1] ; Underwood, Keith Douglas + Show Author Affiliations University

  5. The structural simulation toolkit :a tool for exploring parallel

    Office of Scientific and Technical Information (OSTI)

    architectures and applications. (Conference) | SciTech Connect structural simulation toolkit :a tool for exploring parallel architectures and applications. Citation Details In-Document Search Title: The structural simulation toolkit :a tool for exploring parallel architectures and applications. No abstract prepared. Authors: Kogge, Peter [1] ; Murphy, Richard C. ; Rodrigues, Arun F. ; Underwood, Keith Douglas + Show Author Affiliations (Univeristy of Notre Dame, Notre Dame, IN) Publication

  6. The NetLogger Toolkit V2.0

    Energy Science and Technology Software Center (OSTI)

    2003-03-28

    The NetLogger Toolkit is designed to monitor, under actual operating conditions, the behavior of all the elements of the application-to-application communication path in order to determine exactly where time is spent within a complex system Using NetLogger, distnbuted application components are modified to produce timestamped logs of "interesting" events at all the critical points of the distributed system Events from each component are correlated, which allov^ one to characterize the performance of all aspects ofmore » the system and network in detail. The NetLogger Toolkit itself consists of four components an API and library of functions to simplify the generation of application-level event logs, a set of tools for collecting and sorting log files, an event archive system, and a tool for visualization and analysis of the log files In order to instrument an application to produce event logs, the application developer inserts calls to the NetLogger API at all the critical points in the code, then links the application with the NetLogger library All the tools in the NetLogger Toolkit share a common log format, and assume the existence of accurate and synchronized system clocks NetLogger messages can be logged using an easy-to-read text based format based on the lETF-proposed ULM format, or a binary format that can still be used through the same API but that is several times faster and smaller, with performance comparable or better than binary message formats such as MPI, XDR, SDDF-Binary, and PBIO. The NetLogger binary format is both highly efficient and self-describing, thus optimized for the dynamic message construction and parsing of application instrumentation. NetLogger includes an "activation" API that allows NetLogger logging to be turned on, off, or modified by changing an external file This IS useful for activating logging in daemons/services (e g GndFTP server). The NetLogger reliability API provides the ability to specify backup logging locations and penodically try to reconnect broken TCP pipe. A typical use for this is to store data on local disk while net is down. An event archiver can log one or more incoming NetLogger streams to a local disk file (netlogd) or to a mySQL database (netarchd). We have found exploratory, visual analysis of the log event data to be the most useful means of determining the causes of performance anomalies The NetLogger Visualization tool, niv, has been developed to provide a flexible and interactive graphical representation of system-level and application-level events.« less

  7. UQ Toolkit v 2.0

    Energy Science and Technology Software Center (OSTI)

    2013-10-03

    The Uncertainty Quantification (UQ) Toolkit is a software library for the characterizaton and propagation of uncertainties in computational models. For the characterization of uncertainties, Bayesian inference tools are provided to infer uncertain model parameters, as well as Bayesian compressive sensing methods for discovering sparse representations of high-dimensional input-output response surfaces, and also Karhunen-Loève expansions for representing stochastic processes. Uncertain parameters are treated as random variables and represented with Polynomial Chaos expansions (PCEs). The library implementsmore » several spectral basis function types (e.g. Hermite basis functions in terms of Gaussian random variables or Legendre basis functions in terms of uniform random variables) that can be used to represent random variables with PCEs. For propagation of uncertainty, tools are provided to propagate PCEs that describe the input uncertainty through the computational model using either intrusive methods (Galerkin projection of equations onto basis functions) or non-intrusive methods (perform deterministic operation at sampled values of the random values and project the obtained results onto basis functions).« less

  8. The Configuration Space Toolkit (C-Space Toolkit or CSTK) Ver. 2.5 beta

    Energy Science and Technology Software Center (OSTI)

    2010-02-24

    The C-Space Toolkit provides a software library that makes it easier to program motion planning, simulation, robotics, and virtual reality codes using the Configuration Space abstraction. Key functionality (1) enables the user to special create representations of movable and stationary rigid geometric objects, and (2) perform fast distance, interference (clash) detection, collision detection, closest-feature pairs, and contact queries in terms of object configuration. Not only can queries be computed at any given point in configurationmore » space, but they can be done exactly over linear-translational path segments and approximately for rotational path segments. Interference detection and distance computations can be done with respect to the Minkowski sum of the original geometry and a piece of convex geometry. The Toolkit takes as raw model input (1) collections of convex polygons that form the boundaries of models and (2) convex polyhedra, cones, cylinders, and discs that are models and model components. Configurations are given in terms of homogeneous transforms. A simple OpenGL-based system for displaying and animating the geometric objects is included in the implementation. This version, 2.5 Beta, incorporates feature additions and enhancements, improvements in algorithms, improved robustness, bug fixes and cleaned-up source code, better compliance with standards and recent programming convention, changes to the build process for the software, support for more recent hardware and software platforms, and improvements to documentation and source-code comments.« less

  9. Validation of Power Output for the WIND Toolkit

    SciTech Connect (OSTI)

    King, J.; Clifton, A.; Hodge, B. M.

    2014-09-01

    Renewable energy integration studies require wind data sets of high quality with realistic representations of the variability, ramping characteristics, and forecast performance for current wind power plants. The Wind Integration National Data Set (WIND) Toolkit is meant to be an update for and expansion of the original data sets created for the weather years from 2004 through 2006 during the Western Wind and Solar Integration Study and the Eastern Wind Integration Study. The WIND Toolkit expands these data sets to include the entire continental United States, increasing the total number of sites represented, and it includes the weather years from 2007 through 2012. In addition, the WIND Toolkit has a finer resolution for both the temporal and geographic dimensions. Three separate data sets will be created: a meteorological data set, a wind power data set, and a forecast data set. This report describes the validation of the wind power data set.

  10. Toolkit for Installing Solar on K-12 Schools

    Broader source: Energy.gov [DOE]

    Following the release of The Solar Foundation's Brighter Future: A Study on Solar in U.S. Schools under the Solar Outreach Partnership, the organization has been working to help more K-12 public schools go solar through its technical assistance program. As part of this effort, they developed the Toolkit for Installing Solar on K-12 Schools to compile new and existing resources, designed to provide public school officials with a starting point for pursuing their own solar projects. Hands-on guidance in putting the ideas contained within this toolkit into action is available through the SolarOPs Technical Assistance program.

  11. Incident Management Preparedness and Coordination Toolkit

    Energy Science and Technology Software Center (OSTI)

    2013-04-01

    As with many professions, safety planners and first responders tend to be specialists in certain areas. To be truly useful, tools should be tailored to meet their specific needs. Thus, general software suites aimed at the professional geographic information system (GIS) community might not be the best solution for a first responder with little training in GIS terminology and techniques. On the other hand, commonly used web-based map viewers may not have the capability tomore » be customized for the planning, response, and recovery (PR&R) mission. Data formats should be open and foster easy information flow among local, state, and federal partners. Tools should be free or low-cost to address real-world budget constraints at the local level. They also need to work both with and without a network connection to be robust. The Incident Management Preparedness and Coordination Toolkit (IMPACT) can satisfy many of these needs while working in harmony with established systems at the local, state, and federal levels. The IMPACT software framework, termed the Geospatial Integrated Problem Solving Environment (GIPSE), organizes tasks, tools, and resources for the end user. It uses the concept of software wizards to both customize and extend its functionality. On the Tasks panel are a number of buttons used to initiate various operations. Similar to macros, these task buttons launch scripts that utilize the full functionality of the underlying foundational components such as the SQL spatial database and ORNL-developed map editor. The user is presented with a series of instruction pages which are implemented with HTML for interactivity. On each page are links which initiate specific actions such as creating a map showing various features. Additional tasks may be quickly programmed and added to the panel. The end user can customize the graphical interface to faciltate its use during an emergency. One of the major components of IMPACT is the ORNL Geospatial Viewer (OGV). It is used to provide various map displays for the Tasks and Maps panels. Unlike typical maps however, the OGV display is highly interactive and can be customized, automated, and animated to meet the needs of the user. It is also a means to both import and export geospatial data from or to existing GIS systems. The built-in simulation capability can be used as the basis of table-top exercises.« less

  12. Incident Management Preparedness and Coordination Toolkit

    SciTech Connect (OSTI)

    Koch, Daniel B.

    2013-04-01

    As with many professions, safety planners and first responders tend to be specialists in certain areas. To be truly useful, tools should be tailored to meet their specific needs. Thus, general software suites aimed at the professional geographic information system (GIS) community might not be the best solution for a first responder with little training in GIS terminology and techniques. On the other hand, commonly used web-based map viewers may not have the capability to be customized for the planning, response, and recovery (PR&R) mission. Data formats should be open and foster easy information flow among local, state, and federal partners. Tools should be free or low-cost to address real-world budget constraints at the local level. They also need to work both with and without a network connection to be robust. The Incident Management Preparedness and Coordination Toolkit (IMPACT) can satisfy many of these needs while working in harmony with established systems at the local, state, and federal levels. The IMPACT software framework, termed the Geospatial Integrated Problem Solving Environment (GIPSE), organizes tasks, tools, and resources for the end user. It uses the concept of software wizards to both customize and extend its functionality. On the Tasks panel are a number of buttons used to initiate various operations. Similar to macros, these task buttons launch scripts that utilize the full functionality of the underlying foundational components such as the SQL spatial database and ORNL-developed map editor. The user is presented with a series of instruction pages which are implemented with HTML for interactivity. On each page are links which initiate specific actions such as creating a map showing various features. Additional tasks may be quickly programmed and added to the panel. The end user can customize the graphical interface to faciltate its use during an emergency. One of the major components of IMPACT is the ORNL Geospatial Viewer (OGV). It is used to provide various map displays for the Tasks and Maps panels. Unlike typical maps however, the OGV display is highly interactive and can be customized, automated, and animated to meet the needs of the user. It is also a means to both import and export geospatial data from or to existing GIS systems. The built-in simulation capability can be used as the basis of table-top exercises.

  13. Geospatial Toolkits and Resource Maps for Selected Countries from the National Renewable Energy Laboratory (NREL)

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    NREL developed the Geospatial Toolkit (GsT), a map-based software application that integrates resource data and geographic information systems (GIS) for integrated resource assessment. A variety of agencies within countries, along with global datasets, provided country-specific data. Originally developed in 2005, the Geospatial Toolkit was completely redesigned and re-released in November 2010 to provide a more modern, easier-to-use interface with considerably faster analytical querying capabilities. Toolkits are available for 21 countries and each one can be downloaded separately. The source code for the toolkit is also available. [Taken and edited from http://www.nrel.gov/international/geospatial_toolkits.html

  14. Measurement and Verification Activities Required in the Energy...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Measurement and Verification Activities Required in the Energy Savings Performance Contract Process M&V activities span three phases of the the ESPC process. M&V activities span ...

  15. Cubit Mesh Generation Toolkit V11.1

    Energy Science and Technology Software Center (OSTI)

    2009-03-25

    CUBIT prepares models to be used in computer-based simulation of real-world events. CUBIT is a full-featured software toolkit for robust generation of two- and three-dimensional finite element meshes (grids) and geometry preparation. Its main goal is to reduce the time to generate meshes, particularly large hex meshes of complicated, interlocking assemblies.

  16. Capturing and Using Knowledge about the Use of Visualization Toolkits

    SciTech Connect (OSTI)

    Del Rio, Nicholas R.; Pinheiro da Silva, Paulo

    2012-11-02

    When constructing visualization pipelines using toolkits such as Visualization Toolkit (VTK) and Generic Mapping Tools (GMT), developers must understand (1) what toolkit operators will transform their data from its raw state to some required view state and (2) what viewers are available to present the generated view. Traditionally, developers learn about how to construct visualization pipelines by reading documentation and inspecting code examples, which can be costly in terms of the time and effort expended. Once an initial pipeline is constructed, developers may still have to undergo a trial and error process before a satisfactory visualization is generated. This paper presents the Visualization Knowledge Project (VisKo) that is built on a knowledge base of visualization toolkit operators and how they can be piped together to form visualization pipelines. Developers may now rely on VisKo to guide them when constructing visualization pipelines and in some cases, when VisKo has complete knowledge about some set of operators (i.e., sequencing and parameter settings), automatically generate a fully functional visualization pipeline.

  17. Guide to Using the WIND Toolkit Validation Code

    SciTech Connect (OSTI)

    Lieberman-Cribbin, W.; Draxl, C.; Clifton, A.

    2014-12-01

    In response to the U.S. Department of Energy's goal of using 20% wind energy by 2030, the Wind Integration National Dataset (WIND) Toolkit was created to provide information on wind speed, wind direction, temperature, surface air pressure, and air density on more than 126,000 locations across the United States from 2007 to 2013. The numerical weather prediction model output, gridded at 2-km and at a 5-minute resolution, was further converted to detail the wind power production time series of existing and potential wind facility sites. For users of the dataset it is important that the information presented in the WIND Toolkit is accurate and that errors are known, as then corrective steps can be taken. Therefore, we provide validation code written in R that will be made public to provide users with tools to validate data of their own locations. Validation is based on statistical analyses of wind speed, using error metrics such as bias, root-mean-square error, centered root-mean-square error, mean absolute error, and percent error. Plots of diurnal cycles, annual cycles, wind roses, histograms of wind speed, and quantile-quantile plots are created to visualize how well observational data compares to model data. Ideally, validation will confirm beneficial locations to utilize wind energy and encourage regional wind integration studies using the WIND Toolkit.

  18. Bioenergy Assessment Toolkit | Open Energy Information

    Open Energy Info (EERE)

    intended to provide a practical, common methodology for measuring and recording the consumption and supply of biomass energy. It mainly emphasizes traditional bioenergy use, but...

  19. The Wind Integration National Dataset (WIND) Toolkit (Presentation), NREL (National Renewable Energy Laboratory)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Wind Integration National Dataset (WIND) Toolkit Webinar Caroline Draxl and Bri-Mathias Hodge July 14, 2015 NREL/PR-5000-64691 2 Content * Motivation * Creation of the WIND Toolkit o Meteorological and power data * Data Access * Validation o Meteorological and power validation * Use of the WIND Toolkit 3 Impact of High Wind Penetrations on Power Systems Operations? Photo by Jamie Keller, NREL 19697 Photo by Energy Northwest, NREL 12307 4 Need for High-Resolution Wind Power Data Time of Day

  20. Cyber Security Audit and Attack Detection Toolkit: National SCADA Test Bed

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    May 2008 | Department of Energy Audit and Attack Detection Toolkit: National SCADA Test Bed May 2008 Cyber Security Audit and Attack Detection Toolkit: National SCADA Test Bed May 2008 This project of the cyber security audit and attack detection toolkit is adding control system intelligence to widely deployed enterprise vulnerability scanners and security event managers While many energy utilities employ vulnerability scanners and security event managers (SEM) on their enterprise systems,

  1. Direct measurement and characterization of active photosynthesis zones

    Office of Scientific and Technical Information (OSTI)

    inside biofuel producing and wastewater remediating microalgal biofilms (Journal Article) | SciTech Connect Journal Article: Direct measurement and characterization of active photosynthesis zones inside biofuel producing and wastewater remediating microalgal biofilms Citation Details In-Document Search Title: Direct measurement and characterization of active photosynthesis zones inside biofuel producing and wastewater remediating microalgal biofilms Abstract: Microalgal biofilm based

  2. LEDSGP/Transportation Toolkit/Key Actions/Create a Baseline ...

    Open Energy Info (EERE)

    a Baseline) Jump to: navigation, search LEDSGP Logo.png Transportation Toolkit Home Tools Training Request Assistance Key Actions for Low-Emission Development in Transportation...

  3. RAPID Toolkit: Facilitating Utility-Scale Renewable Energy Development; NREL (National Renewable Energy Laboratory)

    SciTech Connect (OSTI)

    2015-04-01

    The Regulatory and Permitting Information Desktop (RAPID) Toolkit provides information about permits and regulations that affect renewable energy and bulk transmission projects.

  4. Cyber Security Audit and Attack Detection Toolkit: Bandolier and Portaledge, March 2010

    Broader source: Energy.gov [DOE]

    This project of the cyber security audit and attack detection toolkit will employ Bandolier Audit Files for optimizing security configurations and the Portaledge event detection capability for...

  5. A flooding induced station blackout analysis for a pressurized water reactor using the RISMC toolkit

    SciTech Connect (OSTI)

    Mandelli, Diego; Prescott, Steven; Smith, Curtis; Alfonsi, Andrea; Rabiti, Cristian; Cogliati, Joshua; Kinoshita, Robert

    2015-05-17

    In this paper we evaluate the impact of a power uprate on a pressurized water reactor (PWR) for a tsunami-induced flooding test case. This analysis is performed using the RISMC toolkit: the RELAP-7 and RAVEN codes. RELAP-7 is the new generation of system analysis codes that is responsible for simulating the thermal-hydraulic dynamics of PWR and boiling water reactor systems. RAVEN has two capabilities: to act as a controller of the RELAP-7 simulation (e.g., component/system activation) and to perform statistical analyses. In our case, the simulation of the flooding is performed by using an advanced smooth particle hydrodynamics code called NEUTRINO. The obtained results allow the user to investigate and quantify the impact of timing and sequencing of events on system safety. The impact of power uprate is determined in terms of both core damage probability and safety margins.

  6. A flooding induced station blackout analysis for a pressurized water reactor using the RISMC toolkit

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Mandelli, Diego; Prescott, Steven; Smith, Curtis; Alfonsi, Andrea; Rabiti, Cristian; Cogliati, Joshua; Kinoshita, Robert

    2015-05-17

    In this paper we evaluate the impact of a power uprate on a pressurized water reactor (PWR) for a tsunami-induced flooding test case. This analysis is performed using the RISMC toolkit: the RELAP-7 and RAVEN codes. RELAP-7 is the new generation of system analysis codes that is responsible for simulating the thermal-hydraulic dynamics of PWR and boiling water reactor systems. RAVEN has two capabilities: to act as a controller of the RELAP-7 simulation (e.g., component/system activation) and to perform statistical analyses. In our case, the simulation of the flooding is performed by using an advanced smooth particle hydrodynamics code calledmore » NEUTRINO. The obtained results allow the user to investigate and quantify the impact of timing and sequencing of events on system safety. The impact of power uprate is determined in terms of both core damage probability and safety margins.« less

  7. TECA: A Parallel Toolkit for Extreme Climate Analysis

    SciTech Connect (OSTI)

    Prabhat, Mr; Ruebel, Oliver; Byna, Surendra; Wu, Kesheng; Li, Fuyu; Wehner, Michael; Bethel, E. Wes

    2012-03-12

    We present TECA, a parallel toolkit for detecting extreme events in large climate datasets. Modern climate datasets expose parallelism across a number of dimensions: spatial locations, timesteps and ensemble members. We design TECA to exploit these modes of parallelism and demonstrate a prototype implementation for detecting and tracking three classes of extreme events: tropical cyclones, extra-tropical cyclones and atmospheric rivers. We process a modern TB-sized CAM5 simulation dataset with TECA, and demonstrate good runtime performance for the three case studies.

  8. The Wind Integration National Dataset (WIND) toolkit (Presentation)

    SciTech Connect (OSTI)

    Caroline Draxl: NREL

    2014-01-01

    Regional wind integration studies require detailed wind power output data at many locations to perform simulations of how the power system will operate under high penetration scenarios. The wind datasets that serve as inputs into the study must realistically reflect the ramping characteristics, spatial and temporal correlations, and capacity factors of the simulated wind plants, as well as being time synchronized with available load profiles.As described in this presentation, the WIND Toolkit fulfills these requirements by providing a state-of-the-art national (US) wind resource, power production and forecast dataset.

  9. Phase 1 Development Report for the SESSA Toolkit.

    SciTech Connect (OSTI)

    Knowlton, Robert G.; Melton, Brad J; Anderson, Robert J.

    2014-09-01

    The Site Exploitation System for Situational Awareness ( SESSA ) tool kit , developed by Sandia National Laboratories (SNL) , is a comprehensive de cision support system for crime scene data acquisition and Sensitive Site Exploitation (SSE). SESSA is an outgrowth of another SNL developed decision support system , the Building R estoration Operations Optimization Model (BROOM), a hardware/software solution for data acquisition, data management, and data analysis. SESSA was designed to meet forensic crime scene needs as defined by the DoD's Military Criminal Investigation Organiza tion (MCIO) . SESSA is a very comprehensive toolki t with a considerable amount of database information managed through a Microsoft SQL (Structured Query Language) database engine, a Geographical Information System (GIS) engine that provides comprehensive m apping capabilities, as well as a an intuitive Graphical User Interface (GUI) . An electronic sketch pad module is included. The system also has the ability to efficiently generate necessary forms for forensic crime scene investigations (e.g., evidence submittal, laboratory requests, and scene notes). SESSA allows the user to capture photos on site, and can read and generate ba rcode labels that limit transcription errors. SESSA runs on PC computers running Windows 7, but is optimized for touch - screen tablet computers running Windows for ease of use at crime scenes and on SSE deployments. A prototype system for 3 - dimensional (3 D) mapping and measur e ments was also developed to complement the SESSA software. The mapping system employs a visual/ depth sensor that captures data to create 3D visualizations of an interior space and to make distance measurements with centimeter - level a ccuracy. Output of this 3D Model Builder module provides a virtual 3D %22walk - through%22 of a crime scene. The 3D mapping system is much less expensive and easier to use than competitive systems. This document covers the basic installation and operation of th e SESSA tool kit in order to give the user enough information to start using the tool kit . SESSA is currently a prototype system and this documentation covers the initial release of the tool kit . Funding for SESSA was provided by the Department of Defense (D oD), Assistant Secretary of Defense for Research and Engineering (ASD(R&E)) Rapid Fielding (RF) organization. The project was managed by the Defense Forensic Science Center (DFSC) , formerly known as the U.S. Army Criminal Investigation Laboratory (USACIL) . ACKNOWLEDGEMENTS The authors wish to acknowledge the funding support for the development of the Site Exploitation System for Situational Awareness (SESSA) toolkit from the Department of Defense (DoD), Assistant Secretary of Defense for Research and Engineering (ASD(R&E)) Rapid Fielding (RF) organization. The project was managed by the Defense Forensic Science Center (DFSC) , formerly known as the U.S. Army Criminal Investigation Laboratory (USACIL). Special thanks to Mr. Garold Warner, of DFSC, who served as the Project Manager. Individuals that worked on the design, functional attributes, algorithm development, system arc hitecture, and software programming include: Robert Knowlton, Brad Melton, Robert Anderson, and Wendy Amai.

  10. Regulatory and Permitting Information Desktop (RAPID) Toolkit (Poster)

    SciTech Connect (OSTI)

    Young, K. R.; Levine, A.

    2014-09-01

    The Regulatory and Permitting Information Desktop (RAPID) Toolkit combines the former Geothermal Regulatory Roadmap, National Environmental Policy Act (NEPA) Database, and other resources into a Web-based tool that gives the regulatory and utility-scale geothermal developer communities rapid and easy access to permitting information. RAPID currently comprises five tools - Permitting Atlas, Regulatory Roadmap, Resource Library, NEPA Database, and Best Practices. A beta release of an additional tool, the Permitting Wizard, is scheduled for late 2014. Because of the huge amount of information involved, RAPID was developed in a wiki platform to allow industry and regulatory agencies to maintain the content in the future so that it continues to provide relevant and accurate information to users. In 2014, the content was expanded to include regulatory requirements for utility-scale solar and bulk transmission development projects. Going forward, development of the RAPID Toolkit will focus on expanding the capabilities of current tools, developing additional tools, including additional technologies, and continuing to increase stakeholder involvement.

  11. Overview and Meteorological Validation of the Wind Integration National Dataset toolkit

    SciTech Connect (OSTI)

    Draxl, C.; Hodge, B. M.; Clifton, A.; McCaa, J.

    2015-04-13

    The Wind Integration National Dataset (WIND) Toolkit described in this report fulfills these requirements, and constitutes a state-of-the-art national wind resource data set covering the contiguous United States from 2007 to 2013 for use in a variety of next-generation wind integration analyses and wind power planning. The toolkit is a wind resource data set, wind forecast data set, and wind power production and forecast data set derived from the Weather Research and Forecasting (WRF) numerical weather prediction model. WIND Toolkit data are available online for over 116,000 land-based and 10,000 offshore sites representing existing and potential wind facilities.

  12. PHISICS TOOLKIT: MULTI-REACTOR TRANSMUTATION ANALYSIS UTILITY - MRTAU

    SciTech Connect (OSTI)

    Andrea Alfonsi; Cristian Rabiti; Aaron S. Epiney; Yaqi Wang; Joshua Cogliati

    2012-04-01

    The principal idea of this paper is to present the new capabilities available in the PHISICS toolkit, connected with the implementation of the depletion code MRTAU, a generic depletion/ decay/burn-up code developed at the Idaho National Laboratory. It is programmed in a modular structure and modern FORTRAN 95/2003. The code tracks the time evolution of the isotopic concentration of a given material accounting for nuclear reaction happening in presence of neutron flux and also due to natural decay. MRTAU has two different methods to perform the depletion calculation, in order to let the user choose the best one respect his needs. Both the methodologies and some significant results are reported in this paper.

  13. MeSh ToolKit v1.2

    Energy Science and Technology Software Center (OSTI)

    2004-05-15

    MSTK or Mesh Toolkit is a mesh framework that allows users to represent, manipulate and query unstructured 3D arbitrary topology meshes in a general manner without the need to code their own data structures. MSTK is a flexible framework in that is allows (or will eventually allow) a wide variety of underlying representations for the mesh while maintaining a common interface. It will allow users to choose from different mesh representations either at initialization ormore » during the program execution so that the optimal data structures are used for the particular algorithm. The interaction of users and applications with MSTK is through a functional interface that acts as through the mesh always contains vertices, edges, faces and regions and maintains connectivity between all these entities.« less

  14. Device for measuring oxygen activity in liquid sodium

    DOE Patents [OSTI]

    Roy, P.; Young, R.S.

    1973-12-01

    A composite ceramic electrolyte in a configuration (such as a closed end tube or a plate) suitable to separate liquid sodium from a reference electrode with a high impedance voltmeter connected to measure EMF between the sodium and the reference electrode as a measure of oxygen activity in the sodium is described. The composite electrolyte consists of zirconiacalcia with a bonded layer of thoria-yttria. The device is used with a gaseous reference electrode on the zirconia-calcia side and liquid sodium on the thoria-yttria side of the electrolyte. (Official Gazette)

  15. Wind Integration National Dataset (WIND) Toolkit; NREL (National Renewable Energy Laboratory)

    SciTech Connect (OSTI)

    Draxl, Caroline; Hodge, Bri-Mathias

    2015-07-14

    A webinar about the Wind Integration National Dataset (WIND) Toolkit was presented by Bri-Mathias Hodge and Caroline Draxl on July 14, 2015. It was hosted by the Southern Alliance for Clean Energy. The toolkit is a grid integration data set that contains meteorological and power data at a 5-minute resolution across the continental United States for 7 years and hourly power forecasts.

  16. Microgrid Design Toolkit (MDT) Technical Documentation and Component Summaries

    SciTech Connect (OSTI)

    Arguello, Bryan; Gearhart, Jared Lee; Jones, Katherine A.; Eddy, John P.

    2015-09-01

    The Microgrid Design Toolkit (MDT) is a decision support software tool for microgrid designers to use during the microgrid design process. The models that support the two main capabilities in MDT are described. The first capability, the Microgrid Sizing Capability (MSC), is used to determine the size and composition of a new microgrid in the early stages of the design process. MSC is a mixed-integer linear program that is focused on developing a microgrid that is economically viable when connected to the grid. The second capability is focused on refining a microgrid design for operation in islanded mode. This second capability relies on two models: the Technology Management Optimization (TMO) model and Performance Reliability Model (PRM). TMO uses a genetic algorithm to create and refine a collection of candidate microgrid designs. It uses PRM, a simulation based reliability model, to assess the performance of these designs. TMO produces a collection of microgrid designs that perform well with respect to one or more performance metrics.

  17. Activity plan: Directional drilling and environmental measurements while drilling

    SciTech Connect (OSTI)

    Myers, D.A.

    1998-07-16

    This activity plan describes the testing of directional drilling combined with environmental measurements while drilling at two Hanford Site locations. A cold test is to be conducted at the 105A Mock Tank Leak Facility in the 200 East Area. A hot test is proposed to be run at the 216-B-8 tile field north of the 241-B Tank Farm in 200 East Area. Criteria to judge the success, partial success or failure of various aspects of the test are included. The TWRS program is assessing the potential for use of directional drilling because of an identified need to interrogate the vadose zone beneath the single-shell tanks. Because every precaution must be taken to assure that investigation activities do not violate the integrity of the tanks, control of the drill bit and ability to follow a predetermined drill path are of utmost importance and are being tested.

  18. Active doublet method for measuring small changes in physical properties

    DOE Patents [OSTI]

    Roberts, Peter M.; Fehler, Michael C.; Johnson, Paul A.; Phillips, W. Scott

    1994-01-01

    Small changes in material properties of a work piece are detected by measuring small changes in elastic wave velocity and attenuation within a work piece. Active, repeatable source generate coda wave responses from a work piece, where the coda wave responses are temporally displaced. By analyzing progressive relative phase and amplitude changes between the coda wave responses as a function of elapsed time, accurate determinations of velocity and attenuation changes are made. Thus, a small change in velocity occurring within a sample region during the time periods between excitation origin times (herein called "doublets") will produce a relative delay that changes with elapsed time over some portion of the scattered waves. This trend of changing delay is easier to detect than an isolated delay based on a single arrival and provides a direct measure of elastic wave velocity changes arising from changed material properties of the work piece.

  19. Water Security Toolkit User Manual Version 1.2.

    SciTech Connect (OSTI)

    Klise, Katherine A.; Siirola, John Daniel; Hart, David; Hart, William E.; Phillips, Cynthia A.; Haxton, Terranna; Murray, Regan; Janke, Robert; Taxon, Thomas; Laird, Carl; Seth, Arpan; Hackebeil, Gabriel; McGee, Shawn; Mann, Angelica

    2014-08-01

    The Water Security Toolkit (WST) is a suite of open source software tools that can be used by water utilities to create response strategies to reduce the impact of contamination in a water distribution network . WST includes hydraulic and water quality modeling software , optimizati on methodologies , and visualization tools to identify: (1) sensor locations to detect contamination, (2) locations in the network in which the contamination was introduced, (3) hydrants to remove contaminated water from the distribution system, (4) locations in the network to inject decontamination agents to inactivate, remove, or destroy contaminants, (5) locations in the network to take grab sample s to help identify the source of contamination and (6) valves to close in order to isolate contaminate d areas of the network. This user manual describes the different components of WST , along w ith examples and case studies. License Notice The Water Security Toolkit (WST) v.1.2 Copyright c 2012 Sandia Corporation. Under the terms of Contract DE-AC04-94AL85000, there is a non-exclusive license for use of this work by or on behalf of the U.S. government. This software is distributed under the Revised BSD License (see below). In addition, WST leverages a variety of third-party software packages, which have separate licensing policies: Acro Revised BSD License argparse Python Software Foundation License Boost Boost Software License Coopr Revised BSD License Coverage BSD License Distribute Python Software Foundation License / Zope Public License EPANET Public Domain EPANET-ERD Revised BSD License EPANET-MSX GNU Lesser General Public License (LGPL) v.3 gcovr Revised BSD License GRASP AT&T Commercial License for noncommercial use; includes randomsample and sideconstraints executable files LZMA SDK Public Domain nose GNU Lesser General Public License (LGPL) v.2.1 ordereddict MIT License pip MIT License PLY BSD License PyEPANET Revised BSD License Pyro MIT License PyUtilib Revised BSD License PyYAML MIT License runpy2 Python Software Foundation License setuptools Python Software Foundation License / Zope Public License six MIT License TinyXML zlib License unittest2 BSD License Utilib Revised BSD License virtualenv MIT License Vol Common Public License vpykit Revised BSD License Additionally, some precompiled WST binary distributions might bundle other third-party executables files: Coliny Revised BSD License (part of Acro project) Dakota GNU Lesser General Public License (LGPL) v.2.1 PICO Revised BSD License (part of Acro project) i Revised BSD License Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. * Neither the name of Sandia National Laboratories nor Sandia Corporation nor the names of its con- tributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS %22AS IS%22 AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IM- PLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL SANDIA CORPORATION BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUD- ING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ii Acknowledgements This work was supported by the U.S. Environmental Protection Agency through its Office of Research and Development (Interagency Agreement %23 DW8992192801). The material in this document has been subject to technical and policy review by the U.S. EPA, and approved for publication. The views expressed by individual authors, however, are their own, and do not necessarily reflect those of the U.S. Environmental Protection Agency. Mention of trade names, products, or services does not convey official U.S. EPA approval, endorsement, or recommendation. The Water Security Toolkit is an extension of the Threat Ensemble Vulnerability Assessment-Sensor Place- ment Optimization Tool (TEVA-SPOT), which was also developed with funding from the U.S. Environ- mental Protection Agency through its Office of Research and Development (Interagency Agreement %23 DW8992192801). The authors acknowledge the following individuals for their contributions to the devel- opment of TEVA-SPOT: Jonathan Berry (Sandia National Laboratories), Erik Boman (Sandia National Laboratories), Lee Ann Riesen (Sandia National Laboratories), James Uber (University of Cincinnati), and Jean-Paul Watson (Sandia National Laboratories). iii Acronyms ATUS American Time-Use Survey BLAS Basic linear algebra sub-routines CFU Colony-forming unit CVAR Conditional value at risk CWS Contamination warning system EA Evolutionary algorithm EDS Event detection system EPA U.S. Environmental Protection Agency EC Extent of Contamination ERD EPANET results database file GLPK GNU Linear Programming Kit GRASP Greedy randomized adaptive sampling process HEX Hexadecimal HTML HyperText markup language INP EPANET input file LP Linear program MC Mass consumed MILP Mixed integer linear program MIP Mixed integer program MSX Multi-species extension for EPANET NFD Number of failed detections NS Number of sensors NZD Non-zero demand PD Population dosed PE Population exposed PK Population killed TAI Threat assessment input file TCE Tailed-conditioned expectation TD Time to detection TEC Timed extent of contamination TEVA Threat ensemble vulnerability assessment TSB Tryptic soy broth TSG Threat scenario generation file TSI Threat simulation input file VAR Value at risk VC Volume consumed WST Water Security Toolkit YML YAML configuration file format for WST iv Symbols Notation Definition Example %7B , %7D set brackets %7B 1,2,3 %7D means a set containing the values 1,2, and 3. [?] is an element of s [?] S means that s is an element of the set S . [?] for all s = 1 [?] s [?] S means that the statement s = 1 is true for all s in set S . P summation P n i =1 s i means s 1 + s 2 + * * * + s n . %5C set minus S %5C T means the set that contains all those elements of S that are not in set T . %7C given %7C is used to define conditional probability. P ( s %7C t ) means the prob- ability of s occurring given that t occurs. %7C ... %7C cardinality Cardinality of a set is the number of elements of the set. If set S = %7B 2,4,6 %7D , then %7C S %7C = 3. v

  20. Active region emission measure distributions and implications for nanoflare heating

    SciTech Connect (OSTI)

    Cargill, P. J., E-mail: p.cargill@imperial.ac.uk [Space and Atmospheric Physics, The Blackett Laboratory, Imperial College, London SW7 2BW, UKAND (United Kingdom); School of Mathematics and Statistics, University of St Andrews, St Andrews, Scotland KY16 9SS (United Kingdom)

    2014-03-20

    The temperature dependence of the emission measure (EM) in the core of active regions coronal loops is an important diagnostic of heating processes. Observations indicate that EM(T) ? T{sup a} below approximately 4 MK, with 2 < a < 5. Zero-dimensional hydrodynamic simulations of nanoflare trains are used to demonstrate the dependence of a on the time between individual nanoflares (T{sub N} ) and the distribution of nanoflare energies. If T{sub N} is greater than a few thousand seconds, a < 3. For smaller values, trains of equally spaced nanoflares cannot account for the observed range of a if the distribution of nanoflare energies is either constant, randomly distributed, or a power law. Power law distributions where there is a delay between consecutive nanoflares proportional to the energy of the second nanoflare do lead to the observed range of a. However, T{sub N} must then be of the order of hundreds to no more than a few thousand seconds. If a nanoflare leads to the relaxation of a stressed coronal field to a near-potential state, the time taken to build up the required magnetic energy is thus too long to account for the EM measurements. Instead, it is suggested that a nanoflare involves the relaxation from one stressed coronal state to another, dissipating only a small fraction of the available magnetic energy. A consequence is that nanoflare energies may be smaller than previously envisioned.

  1. XOP 2.1 - a new version of the x-ray optics software toolkit. (Conference)

    Office of Scientific and Technical Information (OSTI)

    | SciTech Connect XOP 2.1 - a new version of the x-ray optics software toolkit. Citation Details In-Document Search Title: XOP 2.1 - a new version of the x-ray optics software toolkit. No abstract prepared. Authors: Sanchez del Rio, M. ; Dejus, R. J. Publication Date: 2003-09-09 OSTI Identifier: 828855 Report Number(s): ANL/XFD/CP-111417 TRN: US0404349 DOE Contract Number: W-31-109-ENG-38 Resource Type: Conference Resource Relation: Conference: 8th International Conference on Synchrotron

  2. Measurement and Verification Activities Required in the Energy Savings Performance Contract Process

    Broader source: Energy.gov [DOE]

    There are four major measurement and verification (M&V) activities in the energy savings performance contract (ESPC) procurement process.

  3. Toolkit Model for SN-03 Final Proposal (ratecases/sn03)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Model SN CRAC ToolKit Model Variable, Flat SN CRAC, 80% TPP (TK187SN-03FS3BPA-PropVariableFlatSNN24-Jun-03.xls, 3.1 MB) Data Input Files (required to run the above...

  4. Active radiometer for self-calibrated furnace temperature measurements

    DOE Patents [OSTI]

    Woskov, Paul P.; Cohn, Daniel R.; Titus, Charles H.; Wittle, J. Kenneth; Surma, Jeffrey E.

    1996-01-01

    Radiometer with a probe beam superimposed on its field-of-view for furnace temperature measurements. The radiometer includes a heterodyne millimeter/submillimeter-wave receiver including a millimeter/submillimeter-wave source for probing. The receiver is adapted to receive radiation from a surface whose temperature is to be measured. The radiation includes a surface emission portion and a surface reflection portion which includes the probe beam energy reflected from the surface. The surface emission portion is related to the surface temperature and the surface reflection portion is related to the emissivity of the surface. The simultaneous measurement of surface emissivity serves as a real time calibration of the temperature measurement.

  5. Active radiometer for self-calibrated furnace temperature measurements

    DOE Patents [OSTI]

    Woskov, P.P.; Cohn, D.R.; Titus, C.H.; Wittle, J.K.; Surma, J.E.

    1996-11-12

    A radiometer is described with a probe beam superimposed on its field-of-view for furnace temperature measurements. The radiometer includes a heterodyne millimeter/submillimeter-wave receiver including a millimeter/submillimeter-wave source for probing. The receiver is adapted to receive radiation from a surface whose temperature is to be measured. The radiation includes a surface emission portion and a surface reflection portion which includes the probe beam energy reflected from the surface. The surface emission portion is related to the surface temperature and the surface reflection portion is related to the emissivity of the surface. The simultaneous measurement of surface emissivity serves as a real time calibration of the temperature measurement. 5 figs.

  6. Self-calibrated active pyrometer for furnace temperature measurements

    DOE Patents [OSTI]

    Woskov, Paul P.; Cohn, Daniel R.; Titus, Charles H.; Surma, Jeffrey E.

    1998-01-01

    Pyrometer with a probe beam superimposed on its field-of-view for furnace temperature measurements. The pyrometer includes a heterodyne millimeter/sub-millimeter-wave or microwave receiver including a millimeter/sub-millimeter-wave or microwave source for probing. The receiver is adapted to receive radiation from a surface whose temperature is to be measured. The radiation includes a surface emission portion and a surface reflection portion which includes the probe beam energy reflected from the surface. The surface emission portion is related to the surface temperature and the surface reflection portion is related to the emissivity of the surface. The simultaneous measurement of surface emissivity serves as a real time calibration of the temperature measurement. In an alternative embodiment, a translatable base plate and a visible laser beam allow slow mapping out of interference patterns and obtaining peak values therefor. The invention also includes a waveguide having a replaceable end portion, an insulating refractory sleeve and/or a source of inert gas flow. The pyrometer may be used in conjunction with a waveguide to form a system for temperature measurements in a furnace. The system may employ a chopper or alternatively, be constructed without a chopper. The system may also include an auxiliary reflector for surface emissivity measurements.

  7. Bulletin, Fire Prevention Measures For Cutting, Welding, And Related Activities

    Broader source: Energy.gov [DOE]

    The purpose of this Bulletin is to summarize existing DOE and industry requirements, standards,and guidelines that are applicable to hot work and related activities that represent a significant fire risk to DOE and contractor personnel, programs, and facilities. [DOE/EH-0196 Issue No.97-3

  8. Measurements in large pool fires with an actively cooled calorimeter

    SciTech Connect (OSTI)

    Koski, J.A.; Wix, S.D.

    1995-12-31

    The pool fire thermal test described in Safety Series 6 published by the International Atomic Energy Agency (IAEA) or Title 10, Code of Federal Regulations, Part 71 (10CFR71) in the United States is one of the most difficult tests that a container for larger ``Type B`` quantities of nuclear materials must pass. If retests of a container are required, costly redesign and project delays can result. Accurate measurements and modeling of the pool fire environment will ultimately lower container costs by assuring that containers past the pool fire test on the first attempt. Experiments indicate that the object size or surface temperature of the container can play a role in determining local heat fluxes that are beyond the effects predicted from the simple radiative heat transfer laws. An analytical model described by Nicolette and Larson 1990 can be used to understand many of these effects. In this model a gray gas represents soot particles present in the flame structure. Close to the container surface, these soot particles are convectively and radiatively cooled and interact with incident energy from the surrounding fire. This cooler soot cloud effectively prevents some thermal radiation from reaching the container surface, reducing the surface heat flux below the value predicted by a transparent medium model. With some empirical constants, the model suggested by Nicolette and Larson can be used to more accurately simulate the pool fire environment. Properly formulated, the gray gas approaches also fast enough to be used with standard commercial computer codes to analyze shipping containers. To calibrate this type of model, accurate experimental measurements of radiative absorption coefficients, flame temperatures, and other parameters are necessary. A goal of the calorimeter measurements described here is to obtain such parameters so that a fast, useful design tool for large pool fires can be constructed.

  9. Hydrogeology, chemical and microbial activity measurement through deep permafrost

    SciTech Connect (OSTI)

    Stotler, R.L.; Frape, S.K.; Freifeld, B.M.; Holden, B.; Onstott, T.C.; Ruskeeniemi, T.; Chan, E.

    2010-04-01

    Little is known about hydrogeochemical conditions beneath thick permafrost, particularly in fractured crystalline rock, due to difficulty in accessing this environment. The purpose of this investigation was to develop methods to obtain physical, chemical, and microbial information about the subpermafrost environment from a surface-drilled borehole. Using a U-tube, gas and water samples were collected, along with temperature, pressure, and hydraulic conductivity measurements, 420 m below ground surface, within a 535 m long, angled borehole at High Lake, Nunavut, Canada, in an area with 460-m-thick permafrost. Piezometric head was well above the base of the permafrost, near land surface. Initial water samples were contaminated with drill fluid, with later samples <40% drill fluid. The salinity of the non-drill fluid component was <20,000 mg/L, had a Ca/Na ratio above 1, with {delta}{sup 18}O values {approx}5{per_thousand} lower than the local surface water. The fluid isotopic composition was affected by the permafrost-formation process. Nonbacteriogenic CH{sub 4} was present and the sample location was within methane hydrate stability field. Sampling lines froze before uncontaminated samples from the subpermafrost environment could be obtained, yet the available time to obtain water samples was extended compared to previous studies. Temperature measurements collected from a distributed temperature sensor indicated that this issue can be overcome easily in the future. The lack of methanogenic CH{sub 4} is consistent with the high sulfate concentrations observed in cores. The combined surface-drilled borehole/U-tube approach can provide a large amount of physical, chemical, and microbial data from the subpermafrost environment with few, controllable, sources of contamination.

  10. Impact on quality activities of measurement systems meeting an L:1 rule

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Hamada, M. S.; Burkhardt, J. H.

    2015-04-30

    This study considers the impact of a measurement system that meets an L:1 rule on various quality activities. These activities include inspection, acceptance sampling, and control charting. A measurement system that meets a 10:1 rule performs much better than one that meets a 4:1 rule. R code is provided so that the practitioner is able to evaluate these activities to his or her particular situation.

  11. Measurement Practices for Reliability and Power Quality

    SciTech Connect (OSTI)

    Kueck, JD

    2005-05-06

    This report provides a distribution reliability measurement ''toolkit'' that is intended to be an asset to regulators, utilities and power users. The metrics and standards discussed range from simple reliability, to power quality, to the new blend of reliability and power quality analysis that is now developing. This report was sponsored by the Office of Electric Transmission and Distribution, U.S. Department of Energy (DOE). Inconsistencies presently exist in commonly agreed-upon practices for measuring the reliability of the distribution systems. However, efforts are being made by a number of organizations to develop solutions. In addition, there is growing interest in methods or standards for measuring power quality, and in defining power quality levels that are acceptable to various industries or user groups. The problems and solutions vary widely among geographic areas and among large investor-owned utilities, rural cooperatives, and municipal utilities; but there is still a great degree of commonality. Industry organizations such as the National Rural Electric Cooperative Association (NRECA), the Electric Power Research Institute (EPRI), the American Public Power Association (APPA), and the Institute of Electrical and Electronics Engineers (IEEE) have made tremendous strides in preparing self-assessment templates, optimization guides, diagnostic techniques, and better definitions of reliability and power quality measures. In addition, public utility commissions have developed codes and methods for assessing performance that consider local needs. There is considerable overlap among these various organizations, and we see real opportunity and value in sharing these methods, guides, and standards in this report. This report provides a ''toolkit'' containing synopses of noteworthy reliability measurement practices. The toolkit has been developed to address the interests of three groups: electric power users, utilities, and regulators. The report will also serve to support activities to develop and share information among industry and regulatory participants about critical resources and practices. The toolkit has been developed by investigating the status of indices and definitions, surveying utility organizations on information sharing, and preparing summaries of reliability standards and monitoring requirements--the issues, needs, work under way, existing standards, practices and guidelines--for the following three classifications: (1) terms and definitions of reliability; (2) power quality standards, guidelines, and measurements; and (3) activities and organizations developing and sharing information on distribution reliability. As these synopses of reliability measurement practices are provided, it must be noted that an economic penalty may be associated with requiring too high a reliability level from the distribution system for all customers. It may be appropriate for the distribution system to supply only some base, generally accepted level of reliability. This base level would be adequate for the majority of customers. Users who need a higher level may find it economical to supply using distributed energy resources (DER) and other local solutions to reliability and power quality needs. Local solutions implemented by the customer may be the most cost-effective method for addressing the more stringent needs of a digital economy. These local solutions include energy storage, small distributed generators, and microgrids. This report also considers the market's role in addressing reliability issues and requirements. The customer's needs are discussed in view of issues such as power quality requirements of digital electronic equipment, the cost of outages, the cost of storage and new infrastructure, and natural gas prices. The market role in addressing these issues and requirements is explored. The economic considerations associated with the reliability issues are discussed, as well as the levels at which these economic decisions could be made. Finally, a discussion is provided of the role DER could play in addressing reliability needs, and the possible role of the market in providing needed levels of reliability.

  12. Cazymes Analysis Toolkit (CAT): Webservice for searching and analyzing carbohydrateactive enzymes in a newly sequenced organism using CAZy database

    SciTech Connect (OSTI)

    Karpinets, Tatiana V; Park, Byung; Syed, Mustafa H; Uberbacher, Edward C; Leuze, Michael Rex

    2010-01-01

    The Carbohydrate-Active Enzyme (CAZy) database provides a rich set of manually annotated enzymes that degrade, modify, or create glycosidic bonds. Despite rich and invaluable information stored in the database, software tools utilizing this information for annotation of newly sequenced genomes by CAZy families are limited. We have employed two annotation approaches to fill the gap between manually curated high-quality protein sequences collected in the CAZy database and the growing number of other protein sequences produced by genome or metagenome sequencing projects. The first approach is based on a similarity search against the entire non-redundant sequences of the CAZy database. The second approach performs annotation using links or correspondences between the CAZy families and protein family domains. The links were discovered using the association rule learning algorithm applied to sequences from the CAZy database. The approaches complement each other and in combination achieved high specificity and sensitivity when cross-evaluated with the manually curated genomes of Clostridium thermocellum ATCC 27405 and Saccharophagus degradans 2-40. The capability of the proposed framework to predict the function of unknown protein domains (DUF) and of hypothetical proteins in the genome of Neurospora crassa is demonstrated. The framework is implemented as a Web service, the CAZymes Analysis Toolkit (CAT), and is available at http://cricket.ornl.gov/cgi-bin/cat.cgi.

  13. Guide to Government Witnessing and Review of Measurement and Verification Activities

    Broader source: Energy.gov [DOE]

    Document provides guidance pertaining to government witnessing of measurement and verification (M&V) activities in Federal energy savings performance contract (ESPC) projects. Witnessing of M&V activities is a part of the process of reviewing and approving M&V deliverables and the on-site inspections, spot measurements, short-term monitoring, and performance tests described in the M&V plan.

  14. Measurement of reaction-in-flight neutrons using thulium activation at the

    Office of Scientific and Technical Information (OSTI)

    National Ignition Facility (Conference) | SciTech Connect Measurement of reaction-in-flight neutrons using thulium activation at the National Ignition Facility Citation Details In-Document Search Title: Measurement of reaction-in-flight neutrons using thulium activation at the National Ignition Facility Authors: Grim, Gary P. [1] ; Rundberg, Robert S. [1] ; Hayes-Sterbenz, Anna Catherine [1] ; Jungman, Gerard [1] ; Boswell, Melissa [1] ; Klein, Andreas [1] ; Wilhelmy, Jerry B. [1] ; Tonchev,

  15. Measurement of reaction-in-flight neutrons using thulium activation at the

    Office of Scientific and Technical Information (OSTI)

    National Ignition Facility (Conference) | SciTech Connect Measurement of reaction-in-flight neutrons using thulium activation at the National Ignition Facility Citation Details In-Document Search Title: Measurement of reaction-in-flight neutrons using thulium activation at the National Ignition Facility × You are accessing a document from the Department of Energy's (DOE) SciTech Connect. This site is a product of DOE's Office of Scientific and Technical Information (OSTI) and is provided as

  16. A toolkit for integrated deterministic and probabilistic assessment for hydrogen infrastructure.

    SciTech Connect (OSTI)

    Groth, Katrina; Tchouvelev, Andrei V.

    2014-03-01

    There has been increasing interest in using Quantitative Risk Assessment [QRA] to help improve the safety of hydrogen infrastructure and applications. Hydrogen infrastructure for transportation (e.g. fueling fuel cell vehicles) or stationary (e.g. back-up power) applications is a relatively new area for application of QRA vs. traditional industrial production and use, and as a result there are few tools designed to enable QRA for this emerging sector. There are few existing QRA tools containing models that have been developed and validated for use in small-scale hydrogen applications. However, in the past several years, there has been significant progress in developing and validating deterministic physical and engineering models for hydrogen dispersion, ignition, and flame behavior. In parallel, there has been progress in developing defensible probabilistic models for the occurrence of events such as hydrogen release and ignition. While models and data are available, using this information is difficult due to a lack of readily available tools for integrating deterministic and probabilistic components into a single analysis framework. This paper discusses the first steps in building an integrated toolkit for performing QRA on hydrogen transportation technologies and suggests directions for extending the toolkit.

  17. Active-Interrogation Measurements of Fast Neutrons from Induced Fission in Low-Enriched Uranium

    SciTech Connect (OSTI)

    J. L. Dolan; M. J. Marcath; M. Flaska; S. A. Pozzi; D. L. Chichester; A. Tomanin; P. Peerani

    2014-02-01

    A detection system was designed with MCNPX-PoliMi to measure induced-fission neutrons from U-235 and U-238 using active interrogation. Measurements were then performed with this system at the Joint Research Centre (JRC) in Ispra, Italy on low-enriched uranium samples. Liquid scintillators measured induced fission neutron to characterize the samples in terms of their uranium mass and enrichment. Results are presented to investigate and support the use of organic liquid scintillators with active interrogation techniques to characterize uranium containing materials.

  18. Exploration Of Activity Measurements And Equilibrium Checks For Sediment Dating Using Thick-Window Germanium Detectors

    SciTech Connect (OSTI)

    Warner, Jacob A.; Gladkis, Laura G.; Timmers, Heiko; Fitzsimmons, Kathryn E.; Reynolds, Eva M.

    2011-06-01

    Activity measurements on sediment samples for trapped-charge geological dating using gamma-ray spectroscopy are an important verification of the field-site dose rate determination. Furthermore gamma-ray spectroscopy can check if the natural decay series are in secular equilibrium which is a crucial assumption in such dating. Typically the activities of leading members of the Thorium and Uranium decay series are measured, which requires Germanium detectors with thin windows and good energy resolution in order to effectively detect the associated low energy gamma-rays. Such equipment is not always readily available. The potential of conventional Germanium detectors with thick entrance window has been explored towards routine gamma-ray spectroscopy of sediment samples using higher energy gamma-rays. Alternative isotopes, such as Ac-228 and Pb-212 for the Thorium series, and Pa-234m, Ra-226 and Bi-214 for the Uranium series, have been measured in order to determine the mass-specific activity for the respective series and possibly provide a check of secular equilibrium. In addition to measurements of the K-40 activity, with the alternative approach, the activities of both decay series can be accurately determined. The secular equilibrium condition may be tested for the Thorium series. Measurement accuracy for Pa-234m is, however, not sufficient to permit also a reliable check of equilibrium for the Uranium series.

  19. Moisture measurement for high-level-waste tanks using copper activation probe in cone penetrometer

    SciTech Connect (OSTI)

    Reeder, P.L.; Stromswold, D.C.; Brodzinski, R.L.; Reeves, J.H.; Wilson, W.E.

    1995-10-01

    Laboratory tests have established the feasibility of using neutron activation of copper as a means for measuring the moisture in Hanford`s high-level radioactive waste tanks. The performance of the neutron activation technique to measure moisture is equivalent to the neutron moisture gauges or neutron logs commonly used in commercial well-logging. The principle difference is that the activation of {sup 64}Cu (t{sub 1/2} = 12.7 h) replaces the neutron counters used in moisture gauges or neutron logs. For application to highly radioactive waste tanks, the Cu activation technique has the advantage that it is insensitive to very strong gamma radiation fields or high temperatures. In addition, this technique can be deployed through tortuous paths or in confined spaces such as within the bore of a cone penetrometer. However, the results are not available in ``real-time``. The copper probe`s sensitivity to moisture was measured using simulated tank waste of known moisture content. This report describes the preparation of the simulated waste mixtures and the experiments performed to demonstrate the capabilities of the neutron activation technique. These experiments included determination of the calibration curve of count rate versus moisture content using a single copper probe, measurement of the calibration curve based on ``near-field `` to ``far-field`` counting ratios using a multiple probe technique, and profiling the activity of the copper probe as a function of the vertical height within a simulated waste barrel.

  20. Bayesian calibration of reactor neutron flux spectrum using activation detectors measurements: Application to CALIBAN reactor

    SciTech Connect (OSTI)

    Cartier, J.; Casoli, P.; Chappert, F.

    2013-07-01

    In this paper, we present calibration methods in order to estimate reactor neutron flux spectrum and its uncertainties by using integral activation measurements. These techniques are performed using Bayesian and MCMC framework. These methods are applied to integral activation experiments in the cavity of the CALIBAN reactor. We estimate the neutron flux and its related uncertainties. The originality of this work is that these uncertainties take into account measurements uncertainties, cross-sections uncertainties and model error. In particular, our results give a very good approximation of the total flux and indicate that neutron flux from MCNP simulation for energies above about 5 MeV seems to overestimate the 'real flux'. (authors)

  1. Absolute calibration method for laser megajoule neutron yield measurement by activation diagnostics

    SciTech Connect (OSTI)

    Landoas, Olivier; Rosse, Bertrand; Briat, Michelle; Marmouget, Jean Gabriel; Varignon, Cyril; Ledoux, Xavier; Caillaud, Tony; Thfoin, Isabelle; Bourgade, Jean-Luc; Glebov, Vladimir Yu; Sangster, Thomas C.; Duffy, Tim; Disdier, Laurent

    2011-07-15

    The laser megajoule (LMJ) and the National Ignition Facility (NIF) plan to demonstrate thermonuclear ignition using inertial confinement fusion (ICF). The neutron yield is one of the most important parameters to characterize ICF experiment performance. For decades, the activation diagnostic was chosen as a reference at ICF facilities and is now planned to be the first nuclear diagnostic on LMJ, measuring both 2.45 MeV and 14.1 MeV neutron yields. Challenges for the activation diagnostic development are absolute calibration, accuracy, range requirement, and harsh environment. At this time, copper and zirconium material are identified for 14.1 MeV neutron yield measurement and indium material for 2.45 MeV neutrons. A series of calibrations were performed at Commissariat a l'Energie Atomique (CEA) on a Van de Graff facility to determine activation diagnostics efficiencies and to compare them with results from calculations. The CEA copper activation diagnostic was tested on the OMEGA facility during DT implosion. Experiments showed that CEA and Laboratory for Laser Energetics (LLE) diagnostics agree to better than 1% on the neutron yield measurement, with an independent calibration for each system. Also, experimental sensitivities are in good agreement with simulations and allow us to scale activation diagnostics for the LMJ measurement range.

  2. Multi-Physics Demonstration Problem with the SHARP Reactor Simulation Toolkit

    SciTech Connect (OSTI)

    Merzari, E.; Shemon, E. R.; Yu, Y. Q.; Thomas, J. W.; Obabko, A.; Jain, Rajeev; Mahadevan, Vijay; Tautges, Timothy; Solberg, Jerome; Ferencz, Robert Mark; Whitesides, R.

    2015-12-21

    This report describes to employ SHARP to perform a first-of-a-kind analysis of the core radial expansion phenomenon in an SFR. This effort required significant advances in the framework Multi-Physics Demonstration Problem with the SHARP Reactor Simulation Toolkit used to drive the coupled simulations, manipulate the mesh in response to the deformation of the geometry, and generate the necessary modified mesh files. Furthermore, the model geometry is fairly complex, and consistent mesh generation for the three physics modules required significant effort. Fully-integrated simulations of a 7-assembly mini-core test problem have been performed, and the results are presented here. Physics models of a full-core model of the Advanced Burner Test Reactor have also been developed for each of the three physics modules. Standalone results of each of the three physics modules for the ABTR are presented here, which provides a demonstration of the feasibility of the fully-integrated simulation.

  3. Advancements in Wind Integration Study Data Modeling: The Wind Integration National Dataset (WIND) Toolkit; Preprint

    SciTech Connect (OSTI)

    Draxl, C.; Hodge, B. M.; Orwig, K.; Jones, W.; Searight, K.; Getman, D.; Harrold, S.; McCaa, J.; Cline, J.; Clark, C.

    2013-10-01

    Regional wind integration studies in the United States require detailed wind power output data at many locations to perform simulations of how the power system will operate under high-penetration scenarios. The wind data sets that serve as inputs into the study must realistically reflect the ramping characteristics, spatial and temporal correlations, and capacity factors of the simulated wind plants, as well as be time synchronized with available load profiles. The Wind Integration National Dataset (WIND) Toolkit described in this paper fulfills these requirements. A wind resource dataset, wind power production time series, and simulated forecasts from a numerical weather prediction model run on a nationwide 2-km grid at 5-min resolution will be made publicly available for more than 110,000 onshore and offshore wind power production sites.

  4. An Analysis Technique for Active Neutron Multiplicity Measurements Based on First Principles

    SciTech Connect (OSTI)

    Evans, Louise G; Goddard, Braden; Charlton, William S; Peerani, Paolo

    2012-08-13

    Passive neutron multiplicity counting is commonly used to quantify the total mass of plutonium in a sample, without prior knowledge of the sample geometry. However, passive neutron counting is less applicable to uranium measurements due to the low spontaneous fission rates of uranium. Active neutron multiplicity measurements are therefore used to determine the {sup 235}U mass in a sample. Unfortunately, there are still additional challenges to overcome for uranium measurements, such as the coupling of the active source and the uranium sample. Techniques, such as the coupling method, have been developed to help reduce the dependence of calibration curves for active measurements on uranium samples; although, they still require similar geometry known standards. An advanced active neutron multiplicity measurement method is being developed by Texas A&M University, in collaboration with Los Alamos National Laboratory (LANL) in an attempt to overcome the calibration curve requirements. This method can be used to quantify the {sup 235}U mass in a sample containing uranium without using calibration curves. Furthermore, this method is based on existing detectors and nondestructive assay (NDA) systems, such as the LANL Epithermal Neutron Multiplicity Counter (ENMC). This method uses an inexpensive boron carbide liner to shield the uranium sample from thermal and epithermal neutrons while allowing fast neutrons to reach the sample. Due to the relatively low and constant fission and absorption energy dependent cross-sections at high neutron energies for uranium isotopes, fast neutrons can penetrate the sample without significant attenuation. Fast neutron interrogation therefore creates a homogeneous fission rate in the sample, allowing for first principle methods to be used to determine the {sup 235}U mass in the sample. This paper discusses the measurement method concept and development, including measurements and simulations performed to date, as well as the potential limitations.

  5. Active Layer and Moisture Measurements for Intensive Site 0 and 1, Barrow, Alaska

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    John Peterson

    2015-04-17

    These are measurements of Active Layer Thickness collected along several lines beginning in September, 2011 to the present. The data were collected at several time periods along the Site0 L2 Line, the Site1 AB Line, and an ERT Monitoring Line near Area A in Site1.

  6. Laser-ablated active doping technique for visible spectroscopy measurements on Z.

    SciTech Connect (OSTI)

    Gomez, Matthew Robert

    2013-09-01

    Visible spectroscopy is a powerful diagnostic, allowing plasma parameters ranging from temperature and density to electric and magnetic fields to be measured. Spectroscopic dopants are commonly introduced to make these measurements. On Z, dopants are introduced passively (i.e. a salt deposited on a current-carrying surface); however, in some cases, passive doping can limit the times and locations at which measurements can be made. Active doping utilizes an auxiliary energy source to disperse the dopant independently from the rest of the experiment. The objective of this LDRD project was to explore laser ablation as a method of actively introducing spectroscopic dopants. Ideally, the laser energy would be delivered to the dopant via fiber optic, which would eliminate the need for time-intensive laser alignments in the Z chamber. Experiments conducted in a light lab to assess the feasibility of fibercoupled and open-beam laser-ablated doping are discussed.

  7. Dry, portable calorimeter for nondestructive measurement of the activity of nuclear fuel

    DOE Patents [OSTI]

    Beyer, Norman S.; Lewis, Robert N.; Perry, Ronald B.

    1976-01-01

    The activity of a quantity of heat-producing nuclear fuel is measured rapidly, accurately and nondestructively by a portable dry calorimeter comprising a preheater, an array of temperature-controlled structures comprising a thermally guarded temperature-controlled oven, and a calculation and control unit. The difference between the amounts of electric power required to maintain the oven temperature with and without nuclear fuel in the oven is measured to determine the power produced by radioactive disintegration and hence the activity of the fuel. A portion of the electronic control system is designed to terminate a continuing sequence of measurements when the standard deviation of the variations of the amount of electric power required to maintain oven temperature is within a predetermined value.

  8. Active-Interrogation Measurements of Induced-Fission Neutrons from Low-Enriched Uranium

    SciTech Connect (OSTI)

    J. L. Dolan; M. J. Marcath; M. Flaska; S. A. Pozzi; D. L. Chichester; A. Tomanin; P. Peerani; G. Nebbia

    2012-07-01

    Protection and control of nuclear fuels is paramount for nuclear security and safeguards; therefore, it is important to develop fast and robust controlling mechanisms to ensure the safety of nuclear fuels. Through both passive- and active-interrogation methods we can use fast-neutron detection to perform real-time measurements of fission neutrons for process monitoring. Active interrogation allows us to use different ranges of incident neutron energy to probe for different isotopes of uranium. With fast-neutron detectors, such as organic liquid scintillation detectors, we can detect the induced-fission neutrons and photons and work towards quantifying a samples mass and enrichment. Using MCNPX-PoliMi, a system was designed to measure induced-fission neutrons from U-235 and U-238. Measurements were then performed in the summer of 2010 at the Joint Research Centre in Ispra, Italy. Fissions were induced with an associated particle D-T generator and an isotopic Am-Li source. The fission neutrons, as well as neutrons from (n, 2n) and (n, 3n) reactions, were measured with five 5 by 5 EJ-309 organic liquid scintillators. The D-T neutron generator was available as part of a measurement campaign in place by Padova University. The measurement and data-acquisition systems were developed at the University of Michigan utilizing a CAEN V1720 digitizer and pulse-shape discrimination algorithms to differentiate neutron and photon detections. Low-enriched uranium samples of varying mass and enrichment were interrogated. Acquired time-of-flight curves and cross-correlation curves are currently analyzed to draw relationships between detected neutrons and sample mass and enrichment. In the full paper, the promise of active-interrogation measurements and fast-neutron detection will be assessed through the example of this proof-of-concept measurement campaign. Additionally, MCNPX-PoliMi simulation results will be compared to the measured data to validate the MCNPX-PoliMi code when used for active-interrogation simulations.

  9. Brachial artery vasomotion and transducer pressure effect on measurements by active contour segmentation on ultrasound

    SciTech Connect (OSTI)

    Cary, Theodore W.; Sultan, Laith R.; Sehgal, Chandra M.; Reamer, Courtney B.; Mohler, Emile R.

    2014-02-15

    Purpose: To use feed-forward active contours (snakes) to track and measure brachial artery vasomotion on ultrasound images recorded in both transverse and longitudinal views; and to compare the algorithm's performance in each view. Methods: Longitudinal and transverse view ultrasound image sequences of 45 brachial arteries were segmented by feed-forward active contour (FFAC). The segmented regions were used to measure vasomotion artery diameter, cross-sectional area, and distention both as peak-to-peak diameter and as area. ECG waveforms were also simultaneously extracted frame-by-frame by thresholding a running finite-difference image between consecutive images. The arterial and ECG waveforms were compared as they traced each phase of the cardiac cycle. Results: FFAC successfully segmented arteries in longitudinal and transverse views in all 45 cases. The automated analysis took significantly less time than manual tracing, but produced superior, well-behaved arterial waveforms. Automated arterial measurements also had lower interobserver variability as measured by correlation, difference in mean values, and coefficient of variation. Although FFAC successfully segmented both the longitudinal and transverse images, transverse measurements were less variable. The cross-sectional area computed from the longitudinal images was 27% lower than the area measured from transverse images, possibly due to the compression of the artery along the image depth by transducer pressure. Conclusions: FFAC is a robust and sensitive vasomotion segmentation algorithm in both transverse and longitudinal views. Transverse imaging may offer advantages over longitudinal imaging: transverse measurements are more consistent, possibly because the method is less sensitive to variations in transducer pressure during imaging.

  10. A microreactor array for spatially resolved measurement of catalytic activity for high-throughput catalysis science

    SciTech Connect (OSTI)

    Kondratyuk, Petro; Gumuslu, Gamze; Shukla, Shantanu; Miller, James B; Morreale, Bryan D; Gellman, Andrew J

    2013-04-01

    We describe a 100 channel microreactor array capable of spatially resolved measurement of catalytic activity across the surface of a flat substrate. When used in conjunction with a composition spread alloy film (CSAF, e.g. Pd{sub x}Cu{sub y}Au{sub 1-x-y}) across which component concentrations vary smoothly, such measurements permit high-throughput analysis of catalytic activity and selectivity as a function of catalyst composition. In the reported implementation, the system achieves spatial resolution of 1 mm{sup 2} over a 10×10 mm{sup 2} area. During operation, the reactant gases are delivered at constant flow rate to 100 points of differing composition on the CSAF surface by means of a 100-channel microfluidic device. After coming into contact with the CSAF catalyst surface, the product gas mixture from each of the 100 points is withdrawn separately through a set of 100 isolated channels for analysis using a mass spectrometer. We demonstrate the operation of the device on a Pd{sub x}Cu{sub y}Au{sub 1-x-y} CSAF catalyzing the H{sub 2}-D{sub 2} exchange reaction at 333 K. In essentially a single experiment, we measured the catalytic activity over a broad swathe of concentrations from the ternary composition space of the Pd{sub x}Cu{sub y}Au{sub 1-x-y} alloy.

  11. DIAGNOSING THE TIME DEPENDENCE OF ACTIVE REGION CORE HEATING FROM THE EMISSION MEASURE. II. NANOFLARE TRAINS

    SciTech Connect (OSTI)

    Reep, J. W.; Bradshaw, S. J.; Klimchuk, J. A. E-mail: stephen.bradshaw@rice.edu

    2013-02-20

    The time dependence of heating in solar active regions can be studied by analyzing the slope of the emission measure distribution coolward of the peak. In a previous study we showed that low-frequency heating can account for 0% to 77% of active region core emission measures. We now turn our attention to heating by a finite succession of impulsive events for which the timescale between events on a single magnetic strand is shorter than the cooling timescale. We refer to this scenario as a 'nanoflare train' and explore a parameter space of heating and coronal loop properties with a hydrodynamic model. Our conclusions are (1) nanoflare trains are consistent with 86% to 100% of observed active region cores when uncertainties in the atomic data are properly accounted for; (2) steeper slopes are found for larger values of the ratio of the train duration {Delta} {sub H} to the post-train cooling and draining timescale {Delta} {sub C}, where {Delta} {sub H} depends on the number of heating events, the event duration and the time interval between successive events ({tau} {sub C}); (3) {tau} {sub C} may be diagnosed from the width of the hot component of the emission measure provided that the temperature bins are much smaller than 0.1 dex; (4) the slope of the emission measure alone is not sufficient to provide information about any timescale associated with heating-the length and density of the heated structure must be measured for {Delta} {sub H} to be uniquely extracted from the ratio {Delta} {sub H}/{Delta} {sub C}.

  12. A versatile toolkit for high throughput functional genomics with Trichoderma reesei

    SciTech Connect (OSTI)

    Schuster, Andre; Bruno, Kenneth S.; Collett, James R.; Baker, Scott E.; Seiboth, Bernhard; Kubicek, Christian P.; Schmoll, Monika

    2012-01-02

    The ascomycete fungus, Trichoderma reesei (anamorph of Hypocrea jecorina), represents a biotechnological workhorse and is currently one of the most proficient cellulase producers. While strain improvement was traditionally accomplished by random mutagenesis, a detailed understanding of cellulase regulation can only be gained using recombinant technologies. RESULTS: Aiming at high efficiency and high throughput methods, we present here a construction kit for gene knock out in T. reesei. We provide a primer database for gene deletion using the pyr4, amdS and hph selection markers. For high throughput generation of gene knock outs, we constructed vectors using yeast mediated recombination and then transformed a T. reesei strain deficient in non-homologous end joining (NHEJ) by spore electroporation. This NHEJ-defect was subsequently removed by crossing of mutants with a sexually competent strain derived from the parental strain, QM9414.CONCLUSIONS:Using this strategy and the materials provided, high throughput gene deletion in T. reesei becomes feasible. Moreover, with the application of sexual development, the NHEJ-defect can be removed efficiently and without the need for additional selection markers. The same advantages apply for the construction of multiple mutants by crossing of strains with different gene deletions, which is now possible with considerably less hands-on time and minimal screening effort compared to a transformation approach. Consequently this toolkit can considerably boost research towards efficient exploitation of the resources of T. reesei for cellulase expression and hence second generation biofuel production.

  13. Fusion-neutron-yield, activation measurements at the Z accelerator: Design, analysis, and sensitivity

    SciTech Connect (OSTI)

    Hahn, K. D. Ruiz, C. L.; Fehl, D. L.; Chandler, G. A.; Knapp, P. F.; Smelser, R. M.; Torres, J. A.; Cooper, G. W.; Nelson, A. J.; Leeper, R. J.

    2014-04-15

    We present a general methodology to determine the diagnostic sensitivity that is directly applicable to neutron-activation diagnostics fielded on a wide variety of neutron-producing experiments, which include inertial-confinement fusion (ICF), dense plasma focus, and ion beam-driven concepts. This approach includes a combination of several effects: (1) non-isotropic neutron emission; (2) the 1/r{sup 2} decrease in neutron fluence in the activation material; (3) the spatially distributed neutron scattering, attenuation, and energy losses due to the fielding environment and activation material itself; and (4) temporally varying neutron emission. As an example, we describe the copper-activation diagnostic used to measure secondary deuterium-tritium fusion-neutron yields on ICF experiments conducted on the pulsed-power Z Accelerator at Sandia National Laboratories. Using this methodology along with results from absolute calibrations and Monte Carlo simulations, we find that for the diagnostic configuration on Z, the diagnostic sensitivity is 0.037% ± 17% counts/neutron per cm{sup 2} and is ∼ 40% less sensitive than it would be in an ideal geometry due to neutron attenuation, scattering, and energy-loss effects.

  14. Microprocessor-controlled data-acquisition instrument for neutron-activation measurements

    SciTech Connect (OSTI)

    Jones, B.A.

    1981-01-01

    This paper describes a microprocessor controlled data acquisition instrument designed at Lawrence Livermore National Laboratory to provide experimenters with a diagnostic tool for measuring the performance of laser imploded fusion targets via neutron activation techniques. This instrument features the ability to count four independent inputs simultaneously while providing a front panel readout of these inputs, plus a time of day clock. A hardcopy printout of the data is also provided by a built-in thermal printer. All running modes and parameters are user selectable via a front panel keypad, and a complete set of internal self-testing diagnostics are available for debug.

  15. Measuring the activity of a {sup 51}Cr neutrino source based on the gamma-radiation spectrum

    SciTech Connect (OSTI)

    Gorbachev, V. V. Gavrin, V. N.; Ibragimova, T. V.; Kalikhov, A. V.; Malyshkin, Yu. M.; Shikhin, A. A.

    2015-12-15

    A technique for the measurement of activities of intense β sources by measuring the continuous gamma-radiation (internal bremsstrahlung) spectra is developed. A method for reconstructing the spectrum recorded by a germanium semiconductor detector is described. A method for the absolute measurement of the internal bremsstrahlung spectrum of {sup 51}Cr is presented.

  16. Measurement and prediction of copper ion activity in Lake Orta, Italy

    SciTech Connect (OSTI)

    Camusso, M.; Tartari, G. ); Zirino, A. )

    1991-04-01

    A commercial Cu ion selective electrode (ISE) mounted on a field conductivity, temperature, depth probe (CTD) equipped with pH and oxygen sensors was used to measure a profile of Cu ion activity ({alpha}(Cu{sup 2+})) in Lake Orta, Italy. Lake Orta water contains approximately 32-34 {mu}g L{sup {minus}1} Cu from anthropogenic sources. Below the mixed layer, {alpha}-(Cu{sup 2+}) was directly related to the pH of the lake water. In the body of the hypolimnion, measurements of {alpha}(Cu{sup 2+}) obtained from total Cu concentrations. The pH dependence of the activity/concentration of free Cu{sup 2+} was modeled with a simple ion association model of the lake water. The results of the model were verified by a potentiometric titration of a sample of lake water using Cu, pH, and NH{sub 3} ISEs. The titration simulated a forthcoming chemical treatment now in progress.

  17. The Nuclear Energy Advanced Modeling and Simulation Safeguards and Separations Reprocessing Plant Toolkit

    SciTech Connect (OSTI)

    McCaskey, Alex; Billings, Jay Jay; de Almeida, Valmor F

    2011-08-01

    This report details the progress made in the development of the Reprocessing Plant Toolkit (RPTk) for the DOE Nuclear Energy Advanced Modeling and Simulation (NEAMS) program. RPTk is an ongoing development effort intended to provide users with an extensible, integrated, and scalable software framework for the modeling and simulation of spent nuclear fuel reprocessing plants by enabling the insertion and coupling of user-developed physicochemical modules of variable fidelity. The NEAMS Safeguards and Separations IPSC (SafeSeps) and the Enabling Computational Technologies (ECT) supporting program element have partnered to release an initial version of the RPTk with a focus on software usability and utility. RPTk implements a data flow architecture that is the source of the system's extensibility and scalability. Data flows through physicochemical modules sequentially, with each module importing data, evolving it, and exporting the updated data to the next downstream module. This is accomplished through various architectural abstractions designed to give RPTk true plug-and-play capabilities. A simple application of this architecture, as well as RPTk data flow and evolution, is demonstrated in Section 6 with an application consisting of two coupled physicochemical modules. The remaining sections describe this ongoing work in full, from system vision and design inception to full implementation. Section 3 describes the relevant software development processes used by the RPTk development team. These processes allow the team to manage system complexity and ensure stakeholder satisfaction. This section also details the work done on the RPTk ``black box'' and ``white box'' models, with a special focus on the separation of concerns between the RPTk user interface and application runtime. Section 4 and 5 discuss that application runtime component in more detail, and describe the dependencies, behavior, and rigorous testing of its constituent components.

  18. Feasibility study of prompt gamma neutron activation for NDT measurement of moisture in stone and brick

    SciTech Connect (OSTI)

    Livingston, R. A.; Al-Sheikhly, M.; Grissom, C.; Aloiz, E.; Paul, R.

    2014-02-18

    The conservation of stone and brick architecture or sculpture often involves damage caused by moisture. The feasibility of a NDT method based on prompt gamma neutron activation (PGNA) for measuring the element hydrogen as an indication of water is being evaluated. This includes systematic characterization of the lithology and physical properties of seven building stones and one brick type used in the buildings of the Smithsonian Institution in Washington, D.C. To determine the required dynamic range of the NDT method, moisture-related properties were measured by standard methods. Cold neutron PGNA was also used to determine chemically bound water (CBW) content. The CBW does not damage porous masonry, but creates an H background that defines the minimum level of detection of damaging moisture. The CBW was on the order of 0.5% for all the stones. This rules out the measurement of hygric processes in all of the stones and hydric processed for the stones with fine scale pore-size distributions The upper bound of moisture content, set by porosity through water immersion, was on the order of 5%. The dynamic range is about 1020. The H count rates were roughly 13 cps. Taking into account differences in neutron energies and fluxes and sample volume between cold PGNA and a portable PGNA instrument, it appears that it is feasible to apply PGNA in the field.

  19. Measurement

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... We created a small library to record the current state of the energy and time counters and then inserted calls ... MiniDFT energy usage was measured separately for the ...

  20. Pu-ZR Alloy high-temperature activation-measurement foil

    DOE Patents [OSTI]

    McCuaig, Franklin D.

    1977-08-02

    A nuclear reactor fuel alloy consists essentially of from slightly greater than 7 to about 4 w/o zirconium, balance plutonium, and is characterized in that the alloy is castable and is rollable to thin foils. A preferred embodiment of about 7 w/o zirconium, balance plutonium, has a melting point substantially above the melting point of plutonium, is rollable to foils as thin as 0.0005 inch thick, and is compatible with cladding material when repeatedly cycled to temperatures above 650.degree. C. Neutron flux densities across a reactor core can be determined with a high-temperature activation-measurement foil which consists of a fuel alloy foil core sandwiched and sealed between two cladding material jackets, the fuel alloy foil core being a 7 w/o zirconium, plutonium foil which is from 0.005 to 0.0005 inch thick.

  1. Apparatus having reduced background for measuring radiation activity in aerosol particles

    DOE Patents [OSTI]

    Rodgers, John C.; McFarland, Andrew R.; Oritz, Carlos A.; Marlow, William H.

    1992-01-01

    Apparatus having reduced background for measuring radiation activity in aerosol particles. A continuous air monitoring sampler is described for use in detecting the presence of alpha-emitting aerosol particles. An inlet fractionating screen has been demonstrated to remove about 95% of freshly formed radon progeny from the aerosol sample, and approximately 33% of partially aged progeny. Addition of an electrical condenser and a modified dichotomous virtual impactor are expected to produce considerable improvement in these numbers, the goal being to enrich the transuranic (TRU) fraction of the aerosols. This offers the possibility of improving the signal-to-noise ratio for the detected alpha-particle energy spectrum in the region of interest for detecting TRU materials associated with aerosols, thereby enhancing the performance of background-compensation algorithms for improving the quality of alarm signals intended to warn personnel of potentially harmful quantities of TRU materials in the ambient air.

  2. A NEW COSMOLOGICAL DISTANCE MEASURE USING ACTIVE GALACTIC NUCLEUS X-RAY VARIABILITY

    SciTech Connect (OSTI)

    Franca, Fabio La; Bianchi, Stefano; Branchini, Enzo; Matt, Giorgio [Dipartimento di Matematica e Fisica, Universit Roma Tre, Via della Vasca Navale 84, I-00146, Roma (Italy); Ponti, Gabriele, E-mail: lafranca@fis.uniroma3.it [Max-Planck-Institut fr Extraterrestrische Physik, Giessenbachstrasse 1, D-85748 Garching bei Mnchen (Germany)

    2014-05-20

    We report the discovery of a luminosity distance estimator using active galactic nuclei (AGNs). We combine the correlation between the X-ray variability amplitude and the black hole (BH) mass with the single-epoch spectra BH mass estimates which depend on the AGN luminosity and the line width emitted by the broad-line region. We demonstrate that significant correlations do exist that allow one to predict the AGN (optical or X-ray) luminosity as a function of the AGN X-ray variability and either the H? or the Pa? line widths. In the best case, when the Pa? is used, the relationship has an intrinsic dispersion of ?0.6dex. Although intrinsically more disperse than supernovae Ia, this relation constitutes an alternative distance indicator potentially able to probe, in an independent way, the expansion history of the universe. With respect to this, we show that the new mission concept Athena should be able to measure the X-ray variability of hundreds of AGNs and then constrain the distance modulus with uncertainties of 0.1mag up to z ? 0.6. We also discuss how our estimator has the prospect of becoming a cosmological probe even more sensitive than the current supernovae Ia samples by using a new dedicated wide-field X-ray telescope able to measure the variability of thousands of AGNs.

  3. Measurement

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    fast electron distribution using a flexible, high time resolution hard x-ray spectrometer R. O'Connell, D. J. Den Hartog, and C. B. Forest University of Wisconsin-Madison, Madison, Wisconsin 53706 R. W. Harvey CompX, California ͑Presented on 10 July 2002͒ A 16 spatial channel hard x-ray ͑HXR͒ diagnostic using solid state CdZnTe detectors ͑active area 10 mmϫ10 mmϫ2 mm, 50 mmϫ20 mmϫ20 mm packaged͒ has recently been installed on the Madison Symmetric Torus ͑MST͒ reversed field pinch to

  4. Measurement

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    core velocity fluctuations and the dynamo in a reversed-field pinch * D. J. Den Hartog, †,a) J. T. Chapman, b) D. Craig, G. Fiksel, P. W. Fontana, S. C. Prager, and J. S. Sarff Department of Physics, University of Wisconsin-Madison, 1150 University Avenue, Madison, Wisconsin 53706 ͑Received 16 November 1998; accepted 20 January 1999͒ Plasma flow velocity fluctuations have been directly measured in the high-temperature magnetically confined plasma in the Madison Symmetric Torus ͑MST͒

  5. MEASURING X-RAY VARIABILITY IN FAINT/SPARSELY SAMPLED ACTIVE GALACTIC NUCLEI

    SciTech Connect (OSTI)

    Allevato, V.; Paolillo, M.; Papadakis, I.; Pinto, C.

    2013-07-01

    We study the statistical properties of the normalized excess variance of variability process characterized by a ''red-noise'' power spectral density (PSD), as in the case of active galactic nuclei (AGNs). We perform Monte Carlo simulations of light curves, assuming both a continuous and a sparse sampling pattern and various signal-to-noise ratios (S/Ns). We show that the normalized excess variance is a biased estimate of the variance even in the case of continuously sampled light curves. The bias depends on the PSD slope and on the sampling pattern, but not on the S/N. We provide a simple formula to account for the bias, which yields unbiased estimates with an accuracy better than 15%. We show that the normalized excess variance estimates based on single light curves (especially for sparse sampling and S/N < 3) are highly uncertain (even if corrected for bias) and we propose instead the use of an ''ensemble estimate'', based on multiple light curves of the same object, or on the use of light curves of many objects. These estimates have symmetric distributions, known errors, and can also be corrected for biases. We use our results to estimate the ability to measure the intrinsic source variability in current data, and show that they could also be useful in the planning of the observing strategy of future surveys such as those provided by X-ray missions studying distant and/or faint AGN populations and, more in general, in the estimation of the variability amplitude of sources that will result from future surveys such as Pan-STARRS and LSST.

  6. Statistical circuit simulation with measurement-based active device models: Implications for process control and IC manufacturability

    SciTech Connect (OSTI)

    Root, D.E.; McGinty, D.; Hughes, B.

    1995-12-31

    This paper presents a new approach to statistical active circuit design which unifies device parametric-based process control and non-parametric circuit simulation. Predictions of circuit sensitivity to process variation and yield-loss of circuits fabricated in two different GaAs IC processes are described. The simulations make use of measurement-based active device models which are not formulated in terms of conventional parametric statistical variables. The technique is implemented in commercially available simulation software (HP MDS).

  7. THE CALCULATION OF BURNABLE POISON CORRECTION FACTORS FOR PWR FRESH FUEL ACTIVE COLLAR MEASUREMENTS

    SciTech Connect (OSTI)

    Croft, Stephen; Favalli, Andrea; Swinhoe, Martyn T.

    2012-06-19

    Verification of commercial low enriched uranium light water reactor fuel takes place at the fuel fabrication facility as part of the overall international nuclear safeguards solution to the civilian use of nuclear technology. The fissile mass per unit length is determined nondestructively by active neutron coincidence counting using a neutron collar. A collar comprises four slabs of high density polyethylene that surround the assembly. Three of the slabs contain {sup 3}He filled proportional counters to detect time correlated fission neutrons induced by an AmLi source placed in the fourth slab. Historically, the response of a particular collar design to a particular fuel assembly type has been established by careful cross-calibration to experimental absolute calibrations. Traceability exists to sources and materials held at Los Alamos National Laboratory for over 35 years. This simple yet powerful approach has ensured consistency of application. Since the 1980's there has been a steady improvement in fuel performance. The trend has been to higher burn up. This requires the use of both higher initial enrichment and greater concentrations of burnable poisons. The original analytical relationships to correct for varying fuel composition are consequently being challenged because the experimental basis for them made use of fuels of lower enrichment and lower poison content than is in use today and is envisioned for use in the near term. Thus a reassessment of the correction factors is needed. Experimental reassessment is expensive and time consuming given the great variation between fuel assemblies in circulation. Fortunately current modeling methods enable relative response functions to be calculated with high accuracy. Hence modeling provides a more convenient and cost effective means to derive correction factors which are fit for purpose with confidence. In this work we use the Monte Carlo code MCNPX with neutron coincidence tallies to calculate the influence of Gd{sub 2}O{sub 3} burnable poison on the measurement of fresh pressurized water reactor fuel. To empirically determine the response function over the range of historical and future use we have considered enrichments up to 5 wt% {sup 235}U/{sup tot}U and Gd weight fractions of up to 10 % Gd/UO{sub 2}. Parameterized correction factors are presented.

  8. SU-E-T-557: Measuring Neutron Activation of Cardiac Devices Irradiated During Proton Therapy Using Indium Foils

    SciTech Connect (OSTI)

    Avery, S; Christodouleas, J; Delaney, K; Diffenderfer, E; Brown, K

    2014-06-01

    Purpose: Measuring Neutron Activation of Cardiac devices Irradiated during Proton Therapy using Indium Foils Methods: The foils had dimensions of 25mm x 25mm x 1mm. After being activated, the foils were placed in a Canberra Industries well chamber utilizing a NaI(Tl) scintillation detector. The resulting gamma spectrum was acquired and analyzed using Genie 2000 spectroscopy software. One activation foil was placed over the upper, left chest of RANDO where a pacemaker would be. The rest of the foils were placed over the midline of the patient at different distances, providing a spatial distribution over the phantom. Using lasers and BBs to align the patient, 200 MU square fields were delivered to various treatment sites: the brain, the pancreas, and the prostate. Each field was shot at least a day apart, giving more than enough time for activity of the foil to decay (t1=2 = 54.12 min). Results: The net counts (minus background) of the three aforementioned peaks were used for our measurements. These counts were adjusted to account for detector efficiency, relative photon yields from decay, and the natural abundance of 115-In. The average neutron flux for the closed multi-leaf collimator irradiation was measured to be 1.62 x 106 - 0.18 x 106 cm2 s-1. An order of magnitude estimate of the flux for neutrons up to 1 keV from Diffenderfer et al. gives 3 x 106 cm2 s-1 which does agree on the order of magnitude. Conclusion: Lower energy neutrons have higher interaction cross-sections and are more likely to damage pacemakers. The thermal/slow neutron component may be enough to estimate the overall risk. The true test of the applicability of activation foils is whether or not measurements are capable of predicting cardiac device malfunction. For that, additional studies are needed to provide clinical evidence one way or the other.

  9. Integrated separation scheme for measuring a suite of fission and activation products from a fresh mixed fission and activation product sample

    SciTech Connect (OSTI)

    Morley, Shannon M.; Seiner, Brienne N.; Finn, Erin C.; Greenwood, Lawrence R.; Smith, Steven C.; Gregory, Stephanie J.; Haney, Morgan M.; Lucas, Dawn D.; Arrigo, Leah M.; Beacham, Tere A.; Swearingen, Kevin J.; Friese, Judah I.; Douglas, Matthew; Metz, Lori A.

    2015-05-01

    Mixed fission and activation materials resulting from various nuclear processes and events contain a wide range of isotopes for analysis spanning almost the entire periodic table. In some applications such as environmental monitoring, nuclear waste management, and national security a very limited amount of material is available for analysis and characterization so an integrated analysis scheme is needed to measure multiple radionuclides from one sample. This work describes the production of a complex synthetic sample containing fission products, activation products, and irradiated soil and determines the percent recovery of select isotopes through the integrated chemical separation scheme. Results were determined using gamma energy analysis of separated fractions and demonstrate high yields of Ag (76 6%), Au (94 7%), Cd (59 2%), Co (93 5%), Cs (88 3%), Fe (62 1%), Mn (70 7%), Np (65 5%), Sr (73 2%) and Zn (72 3%). Lower yields (< 25%) were measured for Ga, Ir, Sc, and W. Based on the results of this experiment, a complex synthetic sample can be prepared with low atom/fission ratios and isotopes of interest accurately and precisely measured following an integrated chemical separation method.

  10. Performance measures for evaluating public participation activities in DOE`s Office of Environmental Management

    SciTech Connect (OSTI)

    Carnes, S.A.; Schweitzer, M.; Peelle, E.B.; Wolfe, A.K.; Munro, J.F.

    1996-08-01

    Public participation in decision-making in the United States has become a dominant theme throughout the public sector and is increasingly used in the private sector. Recent reports by the National Research Council and the Commission on Risk Assessment and Risk Management, set up jointly by the White House and Congress, conclude that risk decisions must increasingly be structured in such a manner as to involve stakeholders meaningfully in the processes and activities leading to decisions and, perhaps, through decision implementation. Both of these reports indicate that decisions may take longer but be better if officials: (1) bring all interested and affected parties to the table at the beginning of the risk-discussion process; (2) identify relevant concerns, losses, exposures and other information the parties have; (3) address significant concerns through appropriate research; and (4) present findings in an understandable, accessible way. This report is intended to facilitate subsequent evaluations of public participation activities and programs.

  11. Test plan for measuring ventilation rates and combustible gas levels in TWRS active catch tanks

    SciTech Connect (OSTI)

    NGUYEN, D.M.

    1999-05-20

    The purpose of this test is to provide an initial screening of combustible gas concentrations in catch tanks that currently are operated by Tank Waste Remediation System (TWRS). The data will be used to determine whether or not additional data will be needed for closure of the flammable gas unreviewed safety question for these facilities. This test will involve field measurements of ammonia, organic vapor, and total combustible gas levels in the headspace of the catch tanks. If combustible gas level in a tank exceeds an established threshold, gas samples will be collected in SUMMA canisters for more extensive laboratory analysis. In addition, ventilation rates of some catch tanks will be measured to evaluate removal of flammable gas by air flow through the tanks.

  12. Passive and Active Radiation Measurements Capability at the INL Zero Power Physics Reactor (ZPPR) Facility

    SciTech Connect (OSTI)

    Robert Neibert; John Zabriskie; Collin Knight; James L. Jones

    2010-12-01

    The Zero Power Physics Reactor (ZPPR) facility is a Department of Energy facility located in the Idaho National Laboratorys (INL) Materials and Fuels Complex. It contains various nuclear and non-nuclear materials that are available to support many radiation measurement assessments. User-selected, single material, nuclear and non-nuclear materials can be readily utilized with ZPPR clamshell containers with almost no criticality concerns. If custom, multi-material configurations are desired, the ZPPR clamshell or an approved aluminum Inspection Object (IO) Box container may be utilized, yet each specific material configuration will require a criticality assessment. As an example of the specialized material configurations possible, the National Nuclear Security Agencys Office of Nuclear Verification (NNSA/NA 243) has sponsored the assembly of six material configurations. These are shown in the Appendixes and have been designated for semi-permanent storage that can be available to support various radiation measurement applications.

  13. Using Discrete Event Simulation for Programming Model Exploration at Extreme-Scale: Macroscale Components for the Structural Simulation Toolkit (SST).

    SciTech Connect (OSTI)

    Wilke, Jeremiah J; Kenny, Joseph P.

    2015-02-01

    Discrete event simulation provides a powerful mechanism for designing and testing new extreme- scale programming models for high-performance computing. Rather than debug, run, and wait for results on an actual system, design can first iterate through a simulator. This is particularly useful when test beds cannot be used, i.e. to explore hardware or scales that do not yet exist or are inaccessible. Here we detail the macroscale components of the structural simulation toolkit (SST). Instead of depending on trace replay or state machines, the simulator is architected to execute real code on real software stacks. Our particular user-space threading framework allows massive scales to be simulated even on small clusters. The link between the discrete event core and the threading framework allows interesting performance metrics like call graphs to be collected from a simulated run. Performance analysis via simulation can thus become an important phase in extreme-scale programming model and runtime system design via the SST macroscale components.

  14. Correlating hydrogen oxidation and evolution activity on platinum at different pH with measured hydrogen binding energy

    SciTech Connect (OSTI)

    Sheng, WC; Zhuang, ZB; Gao, MR; Zheng, J; Chen, JGG; Yan, YS

    2015-01-08

    The hydrogen oxidation/evolution reactions are two of the most fundamental reactions in distributed renewable electrochemical energy conversion and storage systems. The identification of the reaction descriptor is therefore of critical importance for the rational catalyst design and development. Here we report the correlation between hydrogen oxidation/evolution activity and experimentally measured hydrogen binding energy for polycrystalline platinum examined in several buffer solutions in a wide range of electrolyte pH from 0 to 13. The hydrogen oxidation/evolution activity obtained using the rotating disk electrode method is found to decrease with the pH, while the hydrogen binding energy, obtained from cyclic voltammograms, linearly increases with the pH. Correlating the hydrogen oxidation/evolution activity to the hydrogen binding energy renders a monotonic decreasing hydrogen oxidation/evolution activity with the hydrogen binding energy, strongly supporting the hypothesis that hydrogen binding energy is the sole reaction descriptor for the hydrogen oxidation/evolution activity on monometallic platinum.

  15. Performance Measures for Evaluating Public Participation Activities in the Office of Environmental Management (DOE)

    SciTech Connect (OSTI)

    Carnes, S.A.

    2001-02-15

    Public participation in Office of Environmental Management (EM) activities throughout the DOE complex is a critical component of the overall success of remediation and waste management efforts. The challenges facing EM and its stakeholders over the next decade or more are daunting (Nuclear Waste News 1996). Achieving a mission composed of such challenges will require innovation, dedication, and a significant degree of good will among all stakeholders. EM's efforts to date, including obtaining and using inputs offered by EM stakeholders, have been notable. Public participation specialists have accepted and met challenges and have consistently tried to improve their performance. They have reported their experiences both formally and informally (e.g., at professional conferences and EM Public Participation Network Workshops, other internal meetings of DOE and contractor public participation specialists, and one-on-one consultations) in order to advance the state of their practice. Our research, and our field research in particular (including our interactions with many representatives of numerous stakeholder groups at nine DOE sites with diverse EM problems), have shown that it, is possible to develop coherent results even in a problem domain as complex as that of EM. We conclude that performance-based evaluations of public participation appear possible, and we have recommended an approach, based on combined and integrated multi-stakeholder views on the attributes of successful public participation and associated performance indicators, that seems workable and should be acceptable to diverse stakeholders. Of course, as an untested recommendation, our approach needs the validation that can only be achieved by application (perhaps at a few DOE sites with ongoing EM activities). Such an application would serve to refine the proposed approach in terms of its clarity, its workability, and its potential for full-scale use by EM and, potentially, other government agencies and private sector concerns.

  16. Direct measurement and characterization of active photosynthesis zones inside biofuel producing and wastewater remediating microalgal biofilms

    SciTech Connect (OSTI)

    Bernstein, Hans C.; Kesaano, Maureen; Moll, Karen; Smith, Terence; Gerlach, Robin; Carlson, Ross; Miller, Charles D.; Peyton, Brent; Cooksey, Keith; Gardner, Robert D.; Sims, Ronald C.

    2014-03-01

    Abstract: Microalgal biofilm based technologies are of keen interest due to their high biomass concentrations and ability to utilize renewable resources, such as light and CO2. While photoautotrophic biofilms have long been used for wastewater remediation applications, biofuel production represents a relatively new and under-represented focus area. However, the direct measurement and characterization of fundamental parameters required for physiological analyses are challenging due to biofilm heterogeneity. This study evaluated oxygenic photosynthesis and biofuel precursor molecule production using a novel rotating algal biofilm reactor (RABR) operated at field- and laboratory-scales for wastewater remediation and biofuel production, respectively. Clear differences in oxygenic-photosynthesis, respiration and biofuel-precursor capacities were observed between the two systems and different conditions based on light and nitrogen availability. Nitrogen depletion was not found to have the same effect on lipid accumulation compared to prior planktonic studies. Physiological characterizations of these microalgal biofilms identify potential areas for future process optimization.

  17. WE-D-17A-05: Measurement of Stray Radiation Within An Active Scanning Proton Therapy Facility: EURADOS WG9 Intercomparison Exercise of Active Dosimetry Systems

    SciTech Connect (OSTI)

    Farah, J; Trompier, F; Stolarczyk, L; Klodowska, M; Liszka, M; Olko, P; Algranati, C; Fellin, F; Schwarz, M; Domingo, C; Romero-Exposito, M; Dufek, V; Frojdh, E; George, S; Harrison, R; Kubancak, J; Ploc, O; Knezevic, Z; Majer, M; Miljanic, S; and others

    2014-06-15

    Purpose: Intercomparison of active dosemeters in the measurement of stray radiation at the Trento active-scanning proton therapy facility. Methods: EURADOS WG9 carried out a large intercomparison exercise to test different dosemeters while measuring secondary neutrons within a 230 MeV scanned proton therapy facility. Detectors included two Bonner Sphere Spectrometers (BSS), three tissue equivalent proportional counters (TEPCHawk) and six rem-counters (Wendi II, Berthold, RadEye, a regular and an extended-range Anderson and Braun NM2B counters). Measurements of neutron ambient dose equivalents, H*(10), were done at several positions inside (8 positions) and outside (3 positions) the treatment room while irradiating a water tank phantom with a 10 10 10 cc field. Results: A generally good agreement on H*(10) values was observed for the tested detectors. At distance of 2.25 m and angles 45, 90 and 180 with respect to the beam axis, BSS and proportional counters agreed within 30%. Higher differences (up to 60%) were observed at the closest and farthest distances, i.e. at positions where detectors sensitivity, energy, fluence and angular response are highly dependent on neutron spectra (flux and energy). The highest neutron H*(10) value, ?60 microSv/Gy, was measured at 1.15 m along the beam axis. H*(10) decreased significantly with the distance from the isocenter dropping to 1.1 microSv/Gy at 4.25 m and 90 from beam axis, ?2 nanoSv/Gy at the entrance of the maze, 0.2 nanoSv/Gy at the door outside the room and below detection limit in the gantry control room and at an adjacent room. These values remain considerately lower than those of passively scattered proton beams. BSS and Hawk unfolded spectra provide valuable inputs when studying the response of each detector. Conclusion: TEPCs and BSS enable accurate measurements of stray neutrons while other rem-meters also give satisfactory results but require further improvements to reduce uncertainties.

  18. Activation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Emergency Response Services Activated At the Waste Isolation Pilot Plant CARLSBAD, N.M., 252014, 11:43 a.m. (MDT) - Emergency response services have been activated at the Waste...

  19. Estimating Air Chemical Emissions from Research Activities Using Stack Measurement Data

    SciTech Connect (OSTI)

    Ballinger, Marcel Y.; Duchsherer, Cheryl J.; Woodruff, Rodger K.; Larson, Timothy V.

    2013-02-15

    Current methods of estimating air emissions from research and development (R&D) activities use a wide range of release fractions or emission factors with bases ranging from empirical to semi-empirical. Although considered conservative, the uncertainties and confidence levels of the existing methods have not been reported. Chemical emissions were estimated from sampling data taken from four research facilities over ten years. The approach was to use a Monte Carlo technique to create distributions of annual emission estimates for target compounds detected in source test samples. Distributions were created for each year and building sampled for compounds with sufficient detection frequency to qualify for the analysis. The results using the Monte Carlo technique without applying a filter to remove negative emission values showed almost all distributions spanning zero, and forty percent of the distributions having a negative mean. This indicates that emissions are so low as to be indistinguishable from building background. Application of a filter to allow only positive values in the distribution provided a more realistic value for emissions and increased the distribution mean by an average of sixteen percent. Release fractions were calculated by dividing the emission estimates by a building chemical inventory quantity. Two variations were used for this quantity: chemical usage, and chemical usage plus one-half standing inventory. Filters were applied so that only release fraction values from zero to one were included in the resulting distributions. Release fractions had a wide range among chemicals and among data sets for different buildings and/or years for a given chemical. Regressions of release fractions to molecular weight and vapor pressure showed weak correlations. Similarly, regressions of mean emissions to chemical usage, chemical inventory, molecular weight and vapor pressure also gave weak correlations. These results highlight the difficulties in estimating emissions from R&D facilities using chemical inventory data.

  20. Activities

    Broader source: Energy.gov [DOE]

    Activities and events provide Residential Network members the opportunity to discuss similar needs and challenges, and to collectively identify effective strategies and useful resources.

  1. First Measurement of the Underlying Event Activity at the LHC with $\\sqrt{s} = 0.9$ TeV

    SciTech Connect (OSTI)

    Khachatryan, Vardan; et al.

    2010-11-06

    A measurement of the underlying activity in scattering processes with transverse momentum scale in the GeV region is performed in proton-proton collisions at sqrt(s) = 0.9 TeV, using data collected by the CMS experiment at the LHC. Charged hadron production is studied with reference to the direction of a leading object, either a charged particle or a set of charged particles forming a jet. Predictions of several QCD-inspired models as implemented in PYTHIA are compared, after full detector simulation, to the data. The models generally predict too little production of charged hadrons with pseudorapidity eta < 2, p_T > 0.5 GeV/c, and azimuthal direction transverse to that of the leading object.

  2. Measurement of Activation Reaction Rate Distributions in a Lead Assembly Bombarded with 500-MeV Protons

    SciTech Connect (OSTI)

    Takada, Hiroshi; Meigo, Shin-ichro; Sasa, Toshinobu; Tsujimoto, Kazufumi; Yasuda, Hideshi

    2000-05-15

    Reaction rate distributions of various activation detectors such as the {sup nat}Ni(n,x){sup 58}Co, {sup 197}Au(n,2n){sup 196}Au, and {sup 197}Au(n,4n){sup 194}Au reactions were measured to study the production and the transport of spallation neutrons in a lead assembly bombarded with protons of 500 MeV. The measured data were analyzed with the nucleon-meson transport code NMTC/JAERI combined with the MCNP4A code using the nuclide production cross sections based on the JENDL Dosimetry File and those calculated with the ALICE-F code. It was found that the NMTC/JAERI-MCNP4A calculations agreed well with the experiments for the low-energy-threshold reaction of {sup nat}Ni(n,x){sup 58}Co. With the increase of threshold energy, however, the calculation underestimated the experiments, especially above 20 MeV. The reason for the disagreement can be attributed to the underestimation of the neutron yield in the tens of mega-electron-volt regions by the NMTC/JAERI code.

  3. Total cyanide mass measurement with micro-ion selective electrode for determination of specific activity of carbon-11 cyanide

    SciTech Connect (OSTI)

    Shea, Colleen; Alexoff, David L.; Kim, Dohyun; Hoque, Ruma; Schueller, Michael J.; Fowler, Joanna S.; Qu, Wenchao

    2015-04-25

    In this study, we aim to directly measure the specific activity (SA) of the carbon-11 cyanide ([11C]CN) produced by our in-house built automated [11C]HCN production system and to identify the major sources of 12C-cyanide (12CN). The [11C]CN is produced from [11C]CO2, which is generated by the 14N(p,?)11C nuclear reaction using a cyclotron. Direct measurement of cyanide concentrations was accomplished using a relatively inexpensive, and easy to use ion selective electrode (ISE) which offered an appropriate range of sensitivity for detecting mass. Multiple components of the [11C]HCN production system were isolated in order to determine their relative contributions to 12CN mass. It was determined that the system gases were responsible for approximately 30% of the mass, and that the molecular sieve/nickel furnace unit contributed approximately 70% of the mass. Beam on target (33 A for 1 and 10 min) did not contribute significantly to the mass. Additionally, we compared the SA of our [11C]HCN precursor determined using the ISE to the SA of our current [11C]CN derived radiotracers determined by HPLC to assure there was no significant difference between the two methods. These results are the first reported use of an ion selective electrode to determine the SA of no-carrier-added cyanide ion, and clearly show that it is a valuable, inexpensive and readily available tool suitable for this purpose.

  4. Total cyanide mass measurement with micro-ion selective electrode for determination of specific activity of carbon-11 cyanide

    SciTech Connect (OSTI)

    Shea, Colleen; Alexoff, David L.; Kim, Dohyun; Hoque, Ruma; Schueller, Michael J.; Fowler, Joanna S.; Qu, Wenchao

    2015-04-25

    In this study, we aim to directly measure the specific activity (SA) of the carbon-11 cyanide ([11C]CN¯) produced by our in-house built automated [11C]HCN production system and to identify the major sources of 12C-cyanide (12CN¯). The [11C]CN¯ is produced from [11C]CO2, which is generated by the 14N(p,α)11C nuclear reaction using a cyclotron. Direct measurement of cyanide concentrations was accomplished using a relatively inexpensive, and easy to use ion selective electrode (ISE) which offered an appropriate range of sensitivity for detecting mass. Multiple components of the [11C]HCN production system were isolated in order to determine their relative contributions to 12CN¯ mass. It was determined that the system gases were responsible for approximately 30% of the mass, and that the molecular sieve/nickel furnace unit contributed approximately 70% of the mass. Beam on target (33 µA for 1 and 10 min) did not contribute significantly to the mass. Additionally, we compared the SA of our [11C]HCN precursor determined using the ISE to the SA of our current [11C]CN¯ derived radiotracers determined by HPLC to assure there was no significant difference between the two methods. These results are the first reported use of an ion selective electrode to determine the SA of no-carrier-added cyanide ion, and clearly show that it is a valuable, inexpensive and readily available tool suitable for this purpose.

  5. Total cyanide mass measurement with micro-ion selective electrode for determination of specific activity of carbon-11 cyanide

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Shea, Colleen; Alexoff, David L.; Kim, Dohyun; Hoque, Ruma; Schueller, Michael J.; Fowler, Joanna S.; Qu, Wenchao

    2015-04-25

    In this study, we aim to directly measure the specific activity (SA) of the carbon-11 cyanide ([11C]CN¯) produced by our in-house built automated [11C]HCN production system and to identify the major sources of 12C-cyanide (12CN¯). The [11C]CN¯ is produced from [11C]CO2, which is generated by the 14N(p,α)11C nuclear reaction using a cyclotron. Direct measurement of cyanide concentrations was accomplished using a relatively inexpensive, and easy to use ion selective electrode (ISE) which offered an appropriate range of sensitivity for detecting mass. Multiple components of the [11C]HCN production system were isolated in order to determine their relative contributions to 12CN¯ mass.more » It was determined that the system gases were responsible for approximately 30% of the mass, and that the molecular sieve/nickel furnace unit contributed approximately 70% of the mass. Beam on target (33 µA for 1 and 10 min) did not contribute significantly to the mass. Additionally, we compared the SA of our [11C]HCN precursor determined using the ISE to the SA of our current [11C]CN¯ derived radiotracers determined by HPLC to assure there was no significant difference between the two methods. These results are the first reported use of an ion selective electrode to determine the SA of no-carrier-added cyanide ion, and clearly show that it is a valuable, inexpensive and readily available tool suitable for this purpose.« less

  6. MCS Systems Administration Toolkit

    Energy Science and Technology Software Center (OSTI)

    2001-09-30

    This package contains a number of systems administration utilities to assist a team of system administrators in managing a computer environment by automating routine tasks and centralizing information. Included are utilities to help install software on a network of computers and programs to make an image of a disk drive, to manage and distribute configuration files for a number of systems, and to run self-testss on systems, as well as an example of using amore » database to manage host information and various utilities.« less

  7. Binary Optics Toolkit

    Energy Science and Technology Software Center (OSTI)

    1996-04-02

    This software is a set of tools for the design and analysis of binary optics. It consists of a series of stand-alone programs written in C and some scripts written in an application-specific language interpreted by a CAD program called DW2000. This software can be used to optimize the design and placement of a complex lens array from input to output and produce contours, mask designs, and data exported for diffractive optic analysis.

  8. Pizza.py Toolkit

    Energy Science and Technology Software Center (OSTI)

    2006-01-01

    Pizza.py is a loosely integrated collection of tools, many of which provide support for the LAMMPS molecular dynamics and ChemCell cell modeling packages. There are tools to create input files. convert between file formats, process log and dump files, create plots, and visualize and animate simulation snapshots. Software packages that are wrapped by Pizza.py. so they can invoked from within Python, include GnuPlot, MatLab, Raster3d. and RasMol. Pizza.py is written in Python and runs onmore » any platform that supports Python. Pizza.py enhances the standard Python interpreter in a few simple ways. Its tools are Python modules which can be invoked interactively, from scripts, or from GUIs when appropriate. Some of the tools require additional Python packages to be installed as part of the users Python. Others are wrappers on software packages (as listed above) which must be available on the users system. It is easy to modify or extend Pizza.py with new functionality or new tools, which need not have anything to do with LAMMPS or ChemCell.« less

  9. Voluntary Initiative: Partnerships Toolkit

    Broader source: Energy.gov [DOE]

    Residential energy efficiency programs are delivered by many different types of organizations and their partners, including utilities, state and local governments, nonprofit organizations, and for-profit companies, but no matter which sector delivers the program, the need to work in partnership with different entities can make or break program success.

  10. Better Buildings Training Toolkit

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    upgrades, a higher assessment-to- ... education for its contractors. Nexus also partnered with Drake State Technical ... of learning; vary teaching techniques to ...

  11. NREL Fleet Analysis Toolkit

    Energy Science and Technology Software Center (OSTI)

    2006-12-31

    The software analyzes large time-dependent data sets from fleets of vehicles and their fueling infrastructure to characterize performance metrics including efficiency, durability, fueling rates and usage patterns.

  12. AISL Development Toolkit

    Energy Science and Technology Software Center (OSTI)

    2012-09-13

    AISLDT is a library of utility functions supporting other AISL software. Code provides various utility functions for Common Lisp, including an object-oriented database, distributed objects, logic query engine, web content management, chart drawing, packet sniffing, text processing, and various data structures.

  13. Residential Marketing Toolkit

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    & Events Expand News & Events Skip navigation links Residential Residential Lighting Energy Star Appliances Consumer Electronics Heat Pump Water Heaters Electric Storage Water...

  14. Livermore Metagenomics Analysis Toolkit

    Energy Science and Technology Software Center (OSTI)

    2012-10-01

    LMAT is designed to take as input a collection of raw metagenomic sequencer reads, and search each read against a reference genome database and assign a taxonomic label and confidence value to each read and report a summary of the predicted taxonomic contents of the metagenomic sample.

  15. Solar Site Survey Toolkit

    Broader source: Energy.gov [DOE]

    After a couple outings, a principal technologist at Sandia National Laboratories saw a need for a travel kit that would have the necessary tools to make the task of site surveys more manageable and safer. They have had great success using the kit in the field already.

  16. ppt-toolkit.com

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Spend by State - Fiscal Year 2014 Color Key: More than 1 million 300,000 to 1 million 100,000 to 300,000 5,000 to 100,000 Less than 5,000...

  17. Portable Application Code Toolkit

    Energy Science and Technology Software Center (OSTI)

    2009-01-01

    PACT is a set of tools to help software developers create applications that will run on any platform and data that can be written/read on any platform.

  18. Measurement of the underlying event activity using charged-particle jets in proton-proton collisions at $\\sqrt{s}$ = 2.76 TeV

    SciTech Connect (OSTI)

    Khachatryan, V.

    2015-09-21

    A measurement of the underlying event (UE) activity in proton-proton collisions is performed using events with charged-particle jets produced in the central pseudorapidity region (|η jet| < 2) and with transverse momentum 1 ≤ pT jet < 100 GeV. The analysis uses a data sample collected at a centre-of-mass energy of 2.76 TeV with the CMS experiment at the LHC. The UE activity is measured as a function of pT jet in terms of the average multiplicity and scalar sum of transverse momenta (pT) of charged particles, with |η| < 2 and pT > 0.5 GeV, in the azimuthal region transverse to the highest pT jet direction. By further dividing the transverse region into two regions of smaller and larger activity, various components of the UE activity are separated. As a result, the measurements are compared to previous results at 0.9 and 7 TeV, and to predictions of several Monte Carlo event generators, providing constraints on the modelling of the UE dynamics

  19. Measurement of the underlying event activity using charged-particle jets in proton-proton collisions at $$\\sqrt{s}$$ = 2.76 TeV

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Khachatryan, V.

    2015-09-21

    A measurement of the underlying event (UE) activity in proton-proton collisions is performed using events with charged-particle jets produced in the central pseudorapidity region (|η jet| < 2) and with transverse momentum 1 ≤ pT jet < 100 GeV. The analysis uses a data sample collected at a centre-of-mass energy of 2.76 TeV with the CMS experiment at the LHC. The UE activity is measured as a function of pT jet in terms of the average multiplicity and scalar sum of transverse momenta (pT) of charged particles, with |η| < 2 and pT > 0.5 GeV, in the azimuthal regionmore » transverse to the highest pT jet direction. By further dividing the transverse region into two regions of smaller and larger activity, various components of the UE activity are separated. As a result, the measurements are compared to previous results at 0.9 and 7 TeV, and to predictions of several Monte Carlo event generators, providing constraints on the modelling of the UE dynamics« less

  20. Development, Testing and Validation of a Waste Assay System for the Measurement and Characterisation of Active Spent Fuel Element Debris From UK Magnox Reactors - 12533

    SciTech Connect (OSTI)

    Mason, John A.; Burke, Kevin J.; Looman, Marc R.; Towner, Antony C.N.; Phillips, Martin E.

    2012-07-01

    This paper describes the development, testing and validation of a waste measurement instrument for characterising active remote handled radioactive waste arising from the operation of Magnox reactors in the United Kingdom. Following operation in UK Magnox gas cooled reactors and a subsequent period of cooling, parts of the magnesium-aluminium alloy cladding were removed from spent fuel and the uranium fuel rods with the remaining cladding were removed to Sellafield for treatment. The resultant Magnox based spent fuel element debris (FED), which constitutes active intermediate level waste (ILW) has been stored in concrete vaults at the reactor sites. As part of the decommissioning of the FED vaults the FED must be removed, measured and characterised and placed in intermediate storage containers. The present system was developed for use at the Trawsfynydd nuclear power station (NPS), which is in the decommissioning phase, but the approach is potentially applicable to FED characterisation at all of the Magnox reactors. The measurement system consists of a heavily shielded and collimated high purity Germanium (HPGe) detector with electromechanical cooling and a high count-rate preamplifier and digital multichannel pulse height analyser. The HPGe based detector system is controlled by a software code, which stores the measurement result and allows a comprehensive analysis of the measured FED data. Fuel element debris is removed from the vault and placed on a tray to a uniform depth of typically 10 cm for measurement. The tray is positioned approximately 1.2 meters above the detector which views the FED through a tungsten collimator with an inverted pyramid shape. At other Magnox sites the positions may be reversed with the shielded and collimated HPGe detector located above the tray on which the FED is measured. A comprehensive Monte Carlo modelling and analysis of the measurement process has been performed in order to optimise the measurement geometry and eliminate interferences from radioactive sources and FED in the immediate vicinity of the measurement position. The detector system has been calibrated and high activity radioactive sources of Cs-137, Co-60 and Na-22 have been used to validate the measurement process. The data acquisition and analysis software code has been tested and validated in keeping with the software quality assurance requirements of both ISO:9001-2008 - TICK-IT in the UK and NQA-1. The measurement and analysis system has been comprehensively tested with high activity sources, is flexible and may be applicable to a wide range of remote handled radioactive waste measurement applications. It is due to be installed at Trawsfynydd NPS later this year. This paper describes the Waste Tray Assay System (WTAS) that has been developed for the measurement of Magnox FED waste. The WTAS has been tested with a range of radioactive sources and its operation has been simulated with benchmarked MCNP Monte Carlo calculations. The measurement software has been validated as has the operation of the system for a range of strong radioactive sources. A system based on the design is due for installation and operation in 2012. The system has application to the measurement of Magnox Fuel Element Debris (FED) waste at other Magnox reactor sites. The major design objective of the WTAS that has been achieved is the ability of the assay system to determine the content of Cs-137, and in turn to enable the fissile burden to be assessed using a radionuclide fingerprint, in the presence of higher and highly variable quantities of Co-60, typically from nimonic springs. The approach can be used in other Magnox FED waste configurations where the detector is located above the FED waste sorting tray and where the collimation is fixed below the detector and at a distance above the tray. In this case, which has also been investigated, there are different shielding problems and mechanical support issues. The extensive use of MCNP Monte Carlo modelling to simulate the geometry of the sorting cell and the distribution of radioactive sources has helped to ensure that all of the detector shielding requirements are addressed and suitable Cs-137 and Co-60 discrimination can be achieved. The WTAS in its present form or in other configurations has relevance to the measurement of other active ILW and highly active RH waste. Examples include high activity RH LLW and RH TRU (Transuranic) waste as defined in the United States arising from both commercial nuclear and Department of Energy (DOE) operations. The analysis is able to analyse a range of radionuclides beyong those expected in the Magnox FED cases. (authors)

  1. Oak Ridge Bio-surveillance Toolkit (ORBiT): Integrating Big-Data Analytics with Visual Analysis for Public Health Dynamics

    SciTech Connect (OSTI)

    Ramanathan, Arvind; Pullum, Laura L; Steed, Chad A; Chennubhotla, Chakra; Quinn, Shannon

    2013-01-01

    In this position paper, we describe the design and implementation of the Oak Ridge Bio-surveillance Toolkit (ORBiT): a collection of novel statistical and machine learning tools implemented for (1) integrating heterogeneous traditional (e.g. emergency room visits, prescription sales data, etc.) and non-traditional (social media such as Twitter and Instagram) data sources, (2) analyzing large-scale datasets and (3) presenting the results from the analytics as a visual interface for the end-user to interact and provide feedback. We present examples of how ORBiT can be used to summarize ex- tremely large-scale datasets effectively and how user interactions can translate into the data analytics process for bio-surveillance. We also present a strategy to estimate parameters relevant to dis- ease spread models from near real time data feeds and show how these estimates can be integrated with disease spread models for large-scale populations. We conclude with a perspective on how integrating data and visual analytics could lead to better forecasting and prediction of disease spread as well as improved awareness of disease susceptible regions.

  2. Measuring Radiation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Measurement Activity SI Units and Prefixes Conversions Safety Around Radiation Sources Types of Radiation Exposure Managing Radiation Emergencies Procedure Demonstration Measurement Activity: How Much Is Present? The size or weight of a container or shipment does not indicate how much radioactivity is in it. The amount of radioactivity in a quantity of material can be determined by noting how many curies of the material are present. This information should be found on labels and/or shipping

  3. Measuring the success of public participation efforts associated with the U.S. Department of energy`s environmental management activities

    SciTech Connect (OSTI)

    Schweitzer, M.; Carnes, S.A.; Peelle, E.B.; Wolfe, A.K.; Munro, J.F.

    1996-06-02

    For the last several years, US DOE`s Office of Environmental Restoration and Waste Management (EM) has actively pursued a policy of involving local stakeholders in the planning and implementation of environmental management activities at contaminated sites throughout the DOE complex. An ongoing ORNL study is focusing on how to measure the success of the public participation efforts. Five DOE facilities were selected for intensive site visits; 4 or 5 additional sites were covered by telephone interviews. Key stakeholder groups were interviewed. Based on the data collection and preliminary analysis, 17 definitions of success were developed for public participation programs. Objective and subjective indicators of the success of the public participation efforts are discussed.

  4. Measuring the Noble Metal and Iodine Composition of Extracted Noble Metal Phase from Spent Nuclear Fuel Using Instrumental Neutron Activation Analysis

    SciTech Connect (OSTI)

    Palomares, R. I.; Dayman, Kenneth J.; Landsberger, Sheldon; Biegalski, Steven R.; Soderquist, Chuck Z.; Casella, Amanda J.; Brady Raap, Michaele C.; Schwantes, Jon M.

    2015-04-01

    Mass quantities of noble metal and iodine nuclides in the metallic noble metal phase extracted from spent fuel are measured using instrumental neutron activation analysis (NAA). Nuclide presence is predicted using fission yield analysis, and mass quantification is derived from standard gamma spectroscopy and radionuclide decay analysis. The nuclide compositions of noble metal phase derived from two dissolution methods, UO2 fuel dissolved in nitric acid and UO2 fuel dissolved in ammonium-carbonate and hydrogen-peroxide solution, are compared. Lastly, the implications of the rapid analytic speed of instrumental NAA are discussed in relation to potential nuclear forensics applications.

  5. SU-E-T-519: Emission of Secondary Particles From a PMMA Phantom During Proton Irradiation: A Simulation Study with the Geant4 Monte Carlo Toolkit

    SciTech Connect (OSTI)

    Lau, A; Chen, Y; Ahmad, S

    2014-06-01

    Purpose: Proton therapy exhibits several advantages over photon therapy due to depth-dose distributions from proton interactions within the target material. However, uncertainties associated with protons beam range in the patient limit the advantage of proton therapy applications. To quantify beam range, positron-emitting nuclei (PEN) and prompt gamma (PG) techniques have been developed. These techniques use de-excitation photons to describe the location of the beam in the patient. To develop a detector system for implementing the PG technique for range verification applications in proton therapy, we studied the yields, energy and angular distributions of the secondary particles emitted from a PMMA phantom. Methods: Proton pencil beams of various energies incident onto a PMMA phantom with dimensions of 5 x 5 x 50 cm3 were used for simulation with the Geant4 toolkit using the standard electromagnetic packages as well as the packages based on the binary-cascade nuclear model. The emitted secondary particles are analyzed . Results: For 160 MeV incident protons, the yields of secondary neutrons and photons per 100 incident protons were ~6 and ~15 respectively. Secondary photon energy spectrum showed several energy peaks in the range between 0 and 10 MeV. The energy peaks located between 4 and 6 MeV were attributed to originate from direct proton interactions with 12C (~ 4.4 MeV) and 16O (~ 6 MeV), respectively. Most of the escaping secondary neutrons were found to have energies between 10 and 100 MeV. Isotropic emissions were found for lower energy neutrons (<10 MeV) and photons for all energies, while higher energy neutrons were emitted predominantly in the forward direction. The yields of emitted photons and neutrons increased with the increase of incident proton energies. Conclusions: A detector system is currently being developed incorporating the yields, energy and angular distributions of secondary particles from proton interactions obtained from this study.

  6. In vivo assessment of magnesium status in human body using accelerator-based neutron activation measurement of hands: A pilot study

    SciTech Connect (OSTI)

    Aslam; Pejovic-Milic, A.; McNeill, F. E.; Byun, S. H.; Prestwich, W. V.; Chettle, D. R.

    2008-02-15

    Magnesium (Mg) is an element essential for many enzymatic reactions in the human body. Various human and animal studies suggest that changes in Mg status are linked to diseases such as cardiac arrhythmia, coronary heart disease, hypertension, premenstrual syndrome, and diabetes mellitus. Thus, knowledge of Mg levels in the human body is needed. A direct measurement of human blood serum, which contains only 0.3% of the total body Mg, is generally used to infer information about the status of Mg in the body. However, in many clinical situations, Mg stored in large levels, for example in bones, muscles, and soft tissues, needs to be monitored either to evaluate the efficacy of a treatment or to study the progression of diseases associated with the deficiency of total body Mg. This work presents a feasibility study of a noninvasive, in vivo neutron activation analysis (IVNAA) technique using the {sup 26}Mg(n,{gamma}){sup 27}Mg reaction to measure Mg levels in human hands. The technique employs the McMaster University high beam current Tandetron accelerator hand irradiation facility and an array of eight NaI (T1) detectors arranged in a 4{pi} geometry for delayed counting of the 0.844 and 1.014 MeV gamma rays emitted when {sup 27}Mg decays in the irradiated hand. Mg determination in humans using IVNAA of hands has been demonstrated to be feasible, with effective doses as low as one-quarter of those delivered in chest x rays. The overall experimental uncertainty in the measurements is estimated to be approximately 5% (1{sigma}). The results are found to be in the range of the in vitro measurements reported for other cortical bones collected from different sites of the human skeleton, which confirms that this technique mainly provides a measure of the amount of Mg in hand bones. The average concentration of Mg determined in human hands is 10.96{+-}1.25 ({+-}1 SD) mg Mg/g Ca. The coefficient of variation (11%) observed in this study is comparable with or lower than several studies using in vitro measurements reported in the literature and therefore allows for a quantitative intersubject comparison, even if to a limited extent. The features of the developed technique such as its simplicity, rapidity, accuracy, robustness, noninvasive nature, and very effective use of radiation doses, present the technique as a viable diagnostic tool available for trial in a clinical environment.

  7. Magnetic Electrochemical Sensing Platform for Biomonitoring of Exposure to Organophosphorus Pesticides and Nerve Agents Based on Simultaneous Measurement of Total Enzyme Amount and Enzyme Activity

    SciTech Connect (OSTI)

    Du, Dan; Wang, Jun; Wang, Limin; Lu, Donglai; Smith, Jordan N.; Timchalk, Charles; Lin, Yuehe

    2011-05-15

    We report a new approach for electrochemical quantification of enzymatic inhibition and phosphorylation for biomonitoring of exposure to organophosphorus (OP) pesticides and nerve agents based on a magnetic beads (MBs) immunosensing platform. The principle of this approach is based on the combination of MBs immuno-capture based enzyme activity assay and competitive immunoassay of total amount of enzyme for simultaneous detection of enzyme inhibition and phosphorylation in biological fluids. Butyrylcholinesterase (BChE) was chosen as a model enzyme. In competitive immunoassay, the target total BChE in a sample (mixture of OP-inhibited BChE and active BChE) competes with the BChE modified on the MBs to bind to the limited anti-BChE antibody labeled with quantum dots (QDs-anti-BChE), and followed by electrochemical stripping analysis of the bound QDs conjugate on the MBs. This assay shows a linear response over the total BChE concentration range of 0.1~20 nM. Simultaneously, real time BChE activity was measured on an electrochemical carbon nanotube-based sensor coupled with microflow injection system after immuno-capture by MBs-anti-BChE conjugate. Therefore, the formed phosphorylated adduct (OP-BChE) can be estimated by the difference values of the total amount BChE (including active and OP-inhibited) and active BChE from established calibration curves. This approach not only eliminates the difficulty in screening of low-dose OP exposure (less than 20% inhibition of BChE) because of individual variation of BChE values, but also avoids the drawback of the scarce availability of OP-BChE antibody. It is sensitive enough to detect 0.5 nM OP-BChE, which is less than 2% BChE inhibition. This method offers a new method for rapid, accurate, selective and inexpensive quantification of phosphorylated adducts and enzyme inhibition for biomonitoring of OP and nerve agent exposures.

  8. Operation Greenhouse. Scientific Director's report of atomic weapon tests at Eniwetok, 1951. Annex 1. 5. Neutron measurements. Part 2. External neutron- and gamma flux measurements by sample activation. Section 1

    SciTech Connect (OSTI)

    Biggers, W.A.; Brown, L.J.

    1985-09-01

    The Greenhouse operation consisted of a series of four shots conducted at Eniwetok during the Srping of 1951. The external neutron threshold measurements consisted of the use of good samples to measure integrated thermal neutron fluxes and sulfur, iodine, and zirconium samples to measure fluxes of higher-energy neutrons. The iodine also measured high-energy gamma-ray intensity. Measurements were also made on slow- and fast-neutron intensities as a function of time.

  9. ARM - Measurements

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    govMeasurementsAerosols

  10. ARM - Measurements

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    govMeasurementsRadiometric

  11. Geospatial Toolkit | Open Energy Information

    Open Energy Info (EERE)

    Ghana, Guatemala, Honduras, India, Nepal, Nicaragua, Oaxaca, Pakistan, Sri Lanka, Turkey Cost: Free Southern Asia, Southern Asia, Southern Asia, South America, Eastern Asia,...

  12. Performance Based Service Acquisition Toolkit

    Broader source: Energy.gov [DOE]

    Performance-based Service Acquisition (PBA) means an acquisition structured around the results to be achieved as opposed to the manner by which the work is to be performed.

  13. Workplace Charging Toolkit: Example Events

    Broader source: Energy.gov [DOE]

    This section provides links to previous successful workplace charging events. These link directly to the organization’s website and contain event agendas and presentation materials.

  14. Model Analysis ToolKit

    Energy Science and Technology Software Center (OSTI)

    2015-05-15

    MATK provides basic functionality to facilitate model analysis within the Python computational environment. Model analysis setup within MATK includes: - define parameters - define observations - define model (python function) - define samplesets (sets of parameter combinations) Currently supported functionality includes: - forward model runs - Latin-Hypercube sampling of parameters - multi-dimensional parameter studies - parallel execution of parameter samples - model calibration using internal Levenberg-Marquardt algorithm - model calibration using lmfit package - modelmore » calibration using levmar package - Markov Chain Monte Carlo using pymc package MATK facilitates model analysis using: - scipy - calibration (scipy.optimize) - rpy2 - Python interface to R« less

  15. Geospatial Toolkit | Open Energy Information

    Open Energy Info (EERE)

    Company Organization: National Renewable Energy Laboratory Sector: Energy Focus Area: Solar, Wind Phase: Determine Baseline Topics: Resource assessment Resource Type: Guide...

  16. Online Toolkit Fosters Bioenergy Innovation

    Broader source: Energy.gov [DOE]

    The construction of this facility that will nearly triple the amount of renewable diesel produced domestically.

  17. Identification of the meiotic toolkit in diatoms and exploration of meiosis-specific SPO11 and RAD51 homologs in the sexual species Pseudo-nitzschia multistriata and Seminavis robusta

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Patil, Shrikant; Moeys, Sara; von Dassow, Peter; Huysman, Marie J. J.; Mapleson, Daniel; De Veylder, Lieven; Sanges, Remo; Vyverman, Wim; Montresor, Marina; Ferrante, Maria Immacolata

    2015-11-14

    Sexual reproduction is an obligate phase in the life cycle of most eukaryotes. Meiosis varies among organisms, which is reflected by the variability of the gene set associated to the process. Diatoms are unicellular organisms that belong to the stramenopile clade and have unique life cycles that can include a sexual phase. The exploration of five diatom genomes and one diatom transcriptome led to the identification of 42 genes potentially involved in meiosis. While these include the majority of known meiosis-related genes, several meiosis-specific genes, including DMC1, could not be identified. Furthermore, phylogenetic analyses supported gene identification and revealed ancestralmore » loss and recent expansion in the RAD51 family in diatoms. The two sexual species Pseudo-nitzschia multistriata and Seminavis robusta were used to explore the expression of meiosis-related genes: RAD21, SPO11-2, RAD51-A, RAD51-B and RAD51-C were upregulated during meiosis, whereas other paralogs in these families showed no differential expression patterns, suggesting that they may play a role during vegetative divisions. An almost identical toolkit is shared among Pseudo-nitzschia multiseries and Fragilariopsis cylindrus, as well as two species for which sex has not been observed, Phaeodactylum tricornutum and Thalassiosira pseudonana, suggesting that these two may retain a facultative sexual phase. Lastly, our results reveal the conserved meiotic toolkit in six diatom species and indicate that Stramenopiles share major modifications of canonical meiosis processes ancestral to eukaryotes, with important divergences in each Kingdom.« less

  18. ARM - Measurements

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    govMeasurementsCloud Properties

  19. ARM - Measurements

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    govMeasurementsSurface Properties

  20. (/sup 11/C)clorgyline and (/sup 11/C)-L-deprenyl and their use in measuring functional monoamine oxidase activity in the brain using positron emission tomography

    DOE Patents [OSTI]

    Fowler, J.S.; MacGregor, R.R.; Wolf, A.P.

    1986-04-17

    This invention involves a new strategy for imaging the activity of the enzyme monoamine oxidase in the living body by using /sup 11/C-labeled enzyme inhibitors which bind irreversibly to an enzyme as a result of catalysis. By using positron emission tomography to image the distribution of radioactivity produced by the body penetrating radiation emitted by carbon-11, a map of functionally active monoamine oxidase activity is obtained. Clorgyline and L-deprenyl are suicide enzyme inhibitors and irreversibly inhibit monoamine oxidase. When these inhibitors are labeled with carbon-11 they provide selective probes for monoamine oxidase localization and reactivity in vivo using positron emission tomography. 2 figs.

  1. Exploring Alternative Non-contact temperature measurements for 99Mo production facility NorthStar FY14 Activity 5, Deliverable 2

    SciTech Connect (OSTI)

    Holloway, Michael Andrew; Dalmas, Dale

    2015-03-04

    We have conducted an experiment to explore an alternative non-contact method of measuring the Inconel target window temperature. This experiment involves using a standard color camera to observe the visible light emitted from the Inconel target window at high heat in order to estimate the window temperature. The safety limit to prevent target window failure is 700 °C and therefore we need a reliable and accurate method of measuring temperature especially in the range of 600 °C to 700 °C if it is to replace the IR camera. In this temperature range the window will emit a significant amount of black body radiation within the visible range and hence the idea of using a color camera. The goal is to see if the shift in window color (determined by the RBG pixel values of the camera) as the target window is heated to 700 °C can be calibrated to the temperature.The reasons for exploring this as an alternative to an IR are camera are: significant cost reduction and potentially less complicated to calibrate.

  2. Evaluation of Cadmium Ratio and Foil Activation Measurements for a Beryllium-Reflected Assembly of U(93.15)O2 Fuel Rods (1.506-cm Triangular Pitch)

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Marshall, Margaret A.

    2014-11-04

    A series of small, compact critical assembly (SCCA) experiments were completed from 1962 to 1965 at Oak Ridge National Laboratory’s Critical Experiments Facility (ORCEF) in support of the Medium-Power Reactor Experiments (MPRE) program. Initial experiments, performed in November and December of 1962, consisted of a core of un-moderated stainless-steel tubes, each containing 26 UOIdaho National Laboratory (INL), Idaho Falls, ID (United States) fuel pellets, surrounded by a graphite reflector. Measurements were performed to determine critical reflector arrangements, fission-rate distributions, and cadmium ratio distributions. The graphite reflectors were then changed to beryllium reflectors. For the beryllium reflected assemblies, the fuel wasmore » in 1.506-cm-triangular and 7-tube clusters leading to two critical configurations. Once the critical configurations had been achieved, various measurements of reactivity, relative axial and radial activation rates of 235U, and cadmium ratios were performed. The cadmium ratio, reactivity, and activation rate measurements, performed on the 1.506-cm-array critical configuration, have been evaluated and are described in this paper.« less

  3. Correlating size and composition-dependent effects with magnetic, Mössbauer, and pair distribution function measurements in a family of catalytically active ferrite nanoparticles

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Wong, Stanislaus; Papaefthymiou, Georgia C.; Lewis, Crystal S.; Han, Jinkyu; Zhang, Cheng; Li, Qiang; Shi, Chenyang; Abeykoon, A. M.Milinda; Billinge, Simon J.L.; Stach, Eric; et al

    2015-05-06

    The magnetic spinel ferrites, MFe₂O₄ (wherein 'M' = a divalent metal ion such as but not limited to Mn, Co, Zn, and Ni), represent a unique class of magnetic materials in which the rational introduction of different 'M's can yield correspondingly unique and interesting magnetic behaviors. Herein we present a generalized hydrothermal method for the synthesis of single-crystalline ferrite nanoparticles with 'M' = Mg, Fe, Co, Ni, Cu, and Zn, respectively, which can be systematically and efficaciously produced simply by changing the metal precursor. Our protocol can moreover lead to reproducible size control by judicious selection of various surfactants. Asmore » such, we have probed the effects of both (i) size and (ii) chemical composition upon the magnetic properties of these nanomaterials using complementary magnetometry and Mössbauer spectroscopy techniques. The structure of the samples was confirmed by atomic PDF analysis of X-ray and electron powder diffraction data as a function of particle size. These materials retain the bulk spinel structure to the smallest size (i.e., 3 nm). In addition, we have explored the catalytic potential of our ferrites as both (a) magnetically recoverable photocatalysts and (b) biological catalysts, and noted that many of our as-prepared ferrite systems evinced intrinsically higher activities as compared with their iron oxide analogues.« less

  4. Correlating size and composition-dependent effects with magnetic, Mössbauer, and pair distribution function measurements in a family of catalytically active ferrite nanoparticles

    SciTech Connect (OSTI)

    Wong, Stanislaus; Papaefthymiou, Georgia C.; Lewis, Crystal S.; Han, Jinkyu; Zhang, Cheng; Li, Qiang; Shi, Chenyang; Abeykoon, A. M.Milinda; Billinge, Simon J.L.; Stach, Eric; Thomas, Justin; Guerrero, Kevin; Munayco, Pablo; Munayco, Jimmy; Scorzelli, Rosa B.; Burnham, Philip; Viescas, Arthur J; Tiano, Amanda L.

    2015-05-06

    The magnetic spinel ferrites, MFe₂O₄ (wherein 'M' = a divalent metal ion such as but not limited to Mn, Co, Zn, and Ni), represent a unique class of magnetic materials in which the rational introduction of different 'M's can yield correspondingly unique and interesting magnetic behaviors. Herein we present a generalized hydrothermal method for the synthesis of single-crystalline ferrite nanoparticles with 'M' = Mg, Fe, Co, Ni, Cu, and Zn, respectively, which can be systematically and efficaciously produced simply by changing the metal precursor. Our protocol can moreover lead to reproducible size control by judicious selection of various surfactants. As such, we have probed the effects of both (i) size and (ii) chemical composition upon the magnetic properties of these nanomaterials using complementary magnetometry and Mössbauer spectroscopy techniques. The structure of the samples was confirmed by atomic PDF analysis of X-ray and electron powder diffraction data as a function of particle size. These materials retain the bulk spinel structure to the smallest size (i.e., 3 nm). In addition, we have explored the catalytic potential of our ferrites as both (a) magnetically recoverable photocatalysts and (b) biological catalysts, and noted that many of our as-prepared ferrite systems evinced intrinsically higher activities as compared with their iron oxide analogues.

  5. Exposure of northern leopard frogs in the Green Bay ecosystem to polychlorinated biphenyls, polychlorinated dibenzo-p-dioxins, and polychlorinated dibenzofurans is measured by direct chemistry but not hepatic ethoxyresorufin-O-deethylase activity

    SciTech Connect (OSTI)

    Huang, Y.W.; Karasov, W.H.; Patnode, K.A.; Jefcoate, C.R.

    1999-10-01

    The authors measured concentrations of polychlorinated biphenyls (PCBs), polychlorinated dibenzo-p-dioxins (PCDDs), and polychlorinated dibenzofurans (PCDFs) in northern leopard frogs collected from the Green Bay ecosystem and explored the catalytic activity of hepatic cytochrome P450-associated monooxygenase (P450 enzyme) as a biomarker for exposure to aryl hydrocarbon receptor (AhR) agonists. The two hypotheses tested were PCH concentrations in northern leopard frogs would be positively correlated with sediment polychlorinated hydrocarbon (PCH) levels in wetland habitats along a contamination gradient and hepatic ethoxyresorufin-O-deethylase (EROD) activity of northern leopard frogs, which is presumably mediated by aryl hydrocarbon receptor (AhR), would be positively correlated with PCH concentrations in frog carcasses from different collection sites. In 1994 and 1995, frogs from seven sites along the lower Fox River and Green Bay, USA, were assayed for hepatic EROD activities and whole carcass concentrations of PCBs, PCDDs, and PCDFs. Tissue total PCB concentrations ranging from 3 to 154 ng/g were significantly correlated with sediment PCB levels. Only one PCDD and two PCDFs at concentrations of 6 to 8 pg/g were found in the frogs collected with frog body weight and was similar among sites except for Peter's Marsh. No significant correlation was found between EROD activity and carcass PCB concentration. This result was consistent with the fact that the frogs collected from the Green Bay ecosystem had relatively low PCB concentrations compared with what was required for induction in the laboratory.

  6. Direct measurement and characterization of active photosynthesis...

    Office of Scientific and Technical Information (OSTI)

    Authors: Bernstein, Hans C. ; Kesaano, Maureen ; Moll, Karen ; Smith, Terence ; Gerlach, Robin ; Carlson, Ross ; Miller, Charles D. ; Peyton, Brent ; Cooksey, Keith ; Gardner, ...

  7. Overview of API (COPM) - measurement activities

    SciTech Connect (OSTI)

    Beckstrom, J.C.

    1995-12-01

    The American Petroleum Institute was founded in 1919 as an outgrowth of the National Petroleum War Committee. That committee was comprised of U.S. oil industry leaders who worked together with the federal government to meet the tremendous demand for petroleum fuel during World War I. The experience demonstrated that, oil industry representatives could work together on common problems affecting the industry and still compete with one another in the marketplace. This in an important concept because under U.S. antitrust law, industry competitors can work together toward mutual objectives using API as the forum. API was the first national petroleum trade association to include all five of the major branches of the industry - exploration, production, refining, transportation and marketing. Today, API is the oil industry`s largest trade association with about 250 member companies. As a non-profit organization, API`s objectives, as set fort in its charter, are: (1) Promote the interests of the U.S. oil industry; (2) Encourage the development of petroleum technology; (3) Cooperate with government on matters of national concern; (4) Foster foreign and domestic trade in U.S. petroleum products; and (5) Inform government and the general public on matters affecting the petroleum industry.

  8. ARM - Measurement -

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    govMeasurements ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Measurement : Categories Instruments The above measurement is considered scientifically relevant for the following instruments. Refer to the datastream (netcdf) file headers of each instrument for a list of all available measurements, including those recorded for diagnostic or quality assurance purposes. Field Campaign Instruments UV-MFRSR : Ultraviolet

  9. Evaluation of accountability measurements

    SciTech Connect (OSTI)

    Cacic, C.G.

    1988-01-01

    The New Brunswick Laboratory (NBL) is programmatically responsible to the U.S. Department of Energy (DOE) Office of Safeguards and Security (OSS) for providing independent review and evaluation of accountability measurement technology in DOE nuclear facilities. This function is addressed in part through the NBL Safegaurds Measurement Evaluation (SME) Program. The SME Program utilizes both on-site review of measurement methods along with material-specific measurement evaluation studies to provide information concerning the adequacy of subject accountability measurements. This paper reviews SME Program activities for the 1986-87 time period, with emphasis on noted improvements in measurement capabilities. Continued evolution of the SME Program to respond to changing safeguards concerns is discussed.

  10. Measurement Science

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    wins 2016 Joseph F. Keithley Award for Advances in Measurement Science October 15, 2015 Honors to Albert Migliori, developer of resonant ultrasound spectroscopy LOS ALAMOS, N.M., Oct. 15, 2015-Los Alamos National Laboratory physicist Albert Migliori, having led the development of a powerful tool for important measurements in condensed matter physics including superconductivity, is being given the Joseph F. Keithley Award For Advances in Measurement Science, the top instrumentation prize of the

  11. ARM - Measurements

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Deployment Operations Measurements SGP Data Plots NASA Data Plots ARM Data Discovery ... SPEC Humidity Diode Laser Hygrometer (DLH) NASA Turbulence AIMMS-20 SPEC Cloud Properties ...

  12. ARM - Measurements

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Measurement Instrument Sponsor Aircraft State PositionVelocity @ 10Hz Trimble DSM(tm) AAF PitchRollAzimuth Trimble Advanced Navigation System (TANS)10Hz AAF...

  13. 2030 District Program and Small Commercial Toolkit

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... Districts act as a concierge and GP - pointing partners towards tools for accurate diagnosis and treatment 22 2030 Districts 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 ...

  14. Voluntary Initiative: Designing Incentives Toolkit | Department...

    Office of Environmental Management (EM)

    & Publications Spotlight on Austin, Texas: Let Your Contractor Be Your Guide for Big Rewards Better Buildings Network View | March 2015 Spotlight on Austin, Texas: Best...

  15. Impact Assessment Toolkit | Open Energy Information

    Open Energy Info (EERE)

    Modeling the Global Trade and Environmental Impacts of Biofuel Policies Modified Microgrid Concept for Rural Electrification in Africa NREL-How to Estimate the Economic...

  16. Wind Integration National Dataset (WIND) Toolkit

    Broader source: Energy.gov [DOE]

    For utility companies, grid operators and other stakeholders interested in wind energy integration, collecting large quantities of high quality data on wind energy resources is vitally important....

  17. Workplace Charging Toolkit: Workshop Best Practices

    Broader source: Energy.gov [DOE]

    These best practices for planning, organizing, and executing a successful and educational workplace charging event have been developed based on lessons learned from more than 20 employer workplace...

  18. Data Exploration Toolkit for serial diffraction experiments ...

    Office of Scientific and Technical Information (OSTI)

    An unavoidable feature of the 'diffraction before destruction' nature of these experiments is that images are obtained from many distinct crystals andor different regions of the ...

  19. Wind Working Group Toolkit | Open Energy Information

    Open Energy Info (EERE)

    wind energy costs and impacts to neighbors and the environment. At the same time, the benefits of wind energy and diversity of possible applications have continued to increase....

  20. LEDS Toolkit and Framework | Open Energy Information

    Open Energy Info (EERE)

    User Interface: Website, Desktop Application Website: en.openei.orgappsLEDS Cost: Free UN Region: Central Asia, Eastern Asia, South-Eastern Asia, "Pacific" is not in the list...

  1. Workplace Charging Toolkit: Workshop Agenda Template

    Broader source: Energy.gov [DOE]

    Develop a streamlined workshop with this half-day agenda focused on introductory-level PEV education and firsthand employer workplace charging experience.

  2. Low Emission Development Strategies toolkit search

    Open Energy Info (EERE)

    search tools and programs in relation to relevant questions, sector, geography, LEDS methodology stage, analytical needs, and other search terms. The country cloud to the right...

  3. Cyber Security Audit and Attack Detection Toolkit

    SciTech Connect (OSTI)

    Peterson, Dale

    2012-05-31

    This goal of this project was to develop cyber security audit and attack detection tools for industrial control systems (ICS). Digital Bond developed and released a tool named Bandolier that audits ICS components commonly used in the energy sector against an optimal security configuration. The Portaledge Project developed a capability for the PI Historian, the most widely used Historian in the energy sector, to aggregate security events and detect cyber attacks.

  4. Machine Learning Toolkit for Extreme Scale

    Energy Science and Technology Software Center (OSTI)

    2014-03-31

    Support Vector Machines (SVM) is a popular machine learning technique, which has been applied to a wide range of domains such as science, finance, and social networks for supervised learning. MaTEx undertakes the challenge of designing a scalable parallel SVM training algorithm for large scale systems, which includes commodity multi-core machines, tightly connected supercomputers and cloud computing systems. Several techniques are proposed for improved speed and memory space usage including adaptive and aggressive elimination ofmore » samples for faster convergence , and sparse format representation of data samples. Several heuristics for earliest possible to lazy elimination of non-contributing samples are considered in MaTEx. In many cases, where an early sample elimination might result in a false positive, low overhead mechanisms for reconstruction of key data structures are proposed. The proposed algorithm and heuristics are implemented and evaluated on various publicly available datasets« less

  5. Data Exploration Toolkit for serial diffraction experiments

    Office of Scientific and Technical Information (OSTI)

    papers Acta Crystallographies Section D Biological Crystallography ISSN 1399-0047 Oliver B. Zeldin,a,b Aaron S. Brewster,c Johan Hattne,d Monarin Uervirojnangkoorn,a,b Artem Y. Lyubimov,a,b Qiangjun Zhou,a,b Minglei Zhao,a,b William I. Weis,a,e,f Nicholas K. Sauterc and Axel T. Brungera,b,e,f* "Department of Molecular and Cellular Physiology, Stanford University, USA, bHoward Hughes Medical Institute, USA, cPhysical Biosciences Division, Lawrence Berkeley National Laboratory, Berkeley, CA

  6. Quarterly Cybersecurity Awareness Campaigns and Toolkits

    Broader source: Energy.gov [DOE]

    The OCIO coordinates a variety of internal cybersecurity awareness campaigns to provide DOE employees with timely information on current cyber threats, recommended mitigations, and sound practices. The OCIO also develops and distributes cyber awareness information and resources to enhance employees' general knowledge of cybersecurity practices, policies, and terms.

  7. LEDSGP/Transportation Toolkit | Open Energy Information

    Open Energy Info (EERE)

    the six key actions necessary to successfully implement a low emission development strategy for the transportation sector. Icon evaluate system.png Evaluate System LEDS icon...

  8. Transportation Assessment Toolkit | Open Energy Information

    Open Energy Info (EERE)

    development and growth Is equitable Respects and preserves local cultural and natural landmarks Well-designed transport systems enable economic development and growth by:...

  9. Rapid Deployment Energy Efficiency (RDEE) Toolkit

    SciTech Connect (OSTI)

    none,

    2009-12-09

    Provides detailed program design and implementation guides to help entities choose successful efficiency programs with funds from the American Recovery and Reinvestment Act of 2009.

  10. Community Wind Toolkit | Open Energy Information

    Open Energy Info (EERE)

    American tribes, universities, cooperatives, or any other local entity seeking to invest in wind energy. Community wind projects may be a single turbine or multi-megawatt...

  11. LEDSGP/DIA-Toolkit | Open Energy Information

    Open Energy Info (EERE)

    Search for Tools Find resources to develop strategies for: Economic growth Reduced poverty Increased jobs Improved energy access Enhanced health Other sustainable developments...

  12. Quarterly Cybersecurity Awareness Campaigns and Toolkits | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    awareness campaigns and Federal awareness programs to provide DOE employees with timely information on current cyber threats, recommended mitigations, and sound practices. ...

  13. Coordinated Low Emissions Assistance Network toolkit search

    Open Energy Info (EERE)

    Planning Are we missing something? Add a Tool software models, databases, training materials, publications Add a Program climate-related activites or strategies How to search the...

  14. Category:RAPID Toolkit | Open Energy Information

    Open Energy Info (EERE)

    and Permitting RAPIDBulkTransmission RAPIDBulkTransmissionAbout RAPIDBulkTransmissionAir Quality RAPIDBulkTransmissionAlaska RAPIDBulkTransmissionArizona RAPID...

  15. Market Analysis Toolkit | Open Energy Information

    Open Energy Info (EERE)

    Antigua and Barbuda-Regional Implementation Plan for CARICOM's Climate Change Resilience Framework Bahamas-Regional Implementation Plan for CARICOM's Climate Change...

  16. Performance Based Service Acquisition Toolkit | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    They illustrate proven approaches that you can adopt and tailor to your requirements. You ... Regulations and Policy Federal Acquisition Regulation (FAR) FAR 7.105 - Contents of ...

  17. Workplace Charging Toolkit: Workshop Speaker Outreach Letter...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Invite employers in your community that already have charging to speak on an employer experience panel. File General Speaker Outreach Letter Template File Clean Cities Branded ...

  18. Designing Incentives Toolkit Better Buildings Residential Network

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    When aligned with program goals, incentives can be a very useful tool in achieving home energy upgrades. Definition Incentives provide motivation to potential customers to take a ...

  19. Financing Initiatives Toolkit | Open Energy Information

    Open Energy Info (EERE)

    wind, and geothermal technologies, respectively. CREST was originally designed for the U.S. market but could be applied elsewhere if metric conversations are made (e.g., currency...

  20. Pervasive Collaboratorive Computing Environment Jabber Toolkit

    Energy Science and Technology Software Center (OSTI)

    2004-05-15

    PCCE Project background: Our experience in building distributed collaboratories has shown us that there is a growing need for simple, non-intrusive, and flexible ways to stay in touch and work together. Towards this goal we are developing a Pervasive Collaborative Computing Environment (PCCE) within which participants can rendezvous and interact with each other. The PCCE aims to support continuous or ad hoc collaboration, target daily tasks and base connectivity, be easy to use and installmore » across multiple platforms, leverage off of existing components when possible, use standards-based components, and leverage off of Grid services (e.g., security and directory services). A key concept for this work is "incremental trust", which allows the system's "trust" of a given user to change dynamically. PCCE Jabber client software: This leverages Jabber. an open Instant Messaging (IM) protocol and the related Internet Engineering Task Force (IETF) standards "XMPP" and "XMPP-IM" to allow collaborating parties to chat either one-on-one or in "chat rooms". Standard Jabber clients will work within this framework, but the software will also include extensions to a (multi-platform) GUI client (Gaim) for X.509-based security, search, and incremental trust. This software also includes Web interfaces for managing user registration to a Jabber server. PCCE Jabber server software: Extensions to the code, database, and configuration files for the dominant open-source Jabber server, "jabberd". Extensions for search, X.509 security, and incremental trust. Note that the jabberd software is not included as part of this software.« less

  1. Land Use Assessment Toolkit | Open Energy Information

    Open Energy Info (EERE)

    Evaluate public and private sector capacity (e.g., institutional, governance, financial) to support initiatives Assess biophysical and economic potential for these...

  2. Workplace Charging Toolkit: Workshop Outreach Presentation Template

    Broader source: Energy.gov [DOE]

    Educate workshop attendees and employers about the benefits of workplace charging and the Challenge by selecting slides from this sample presentation.

  3. Category:Transportation Toolkits | Open Energy Information

    Open Energy Info (EERE)

    following 135 pages are in this category, out of 135 total. A A Report on Worldwide Hydrogen Bus Demonstrations, 2002-2007 A Review of HOV Lane Performance and Policy Options in...

  4. MEASURING PROJECTOR

    DOE Patents [OSTI]

    Franck, J.V.; Broadhead, P.S.; Skiff, E.W.

    1959-07-14

    A semiautomatic measuring projector particularly adapted for measurement of the coordinates of photographic images of particle tracks as prcduced in a bubble or cloud chamber is presented. A viewing screen aids the operator in selecting a particle track for measurement. After approximate manual alignment, an image scanning system coupled to a servo control provides automatic exact alignment of a track image with a reference point. The apparatus can follow along a track with a continuous motion while recording coordinate data at various selected points along the track. The coordinate data is recorded on punched cards for subsequent computer calculation of particle trajectory, momentum, etc.

  5. Spyware.pdf | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Spyware.pdf More Documents & Publications ProActive DNS Blacklisting 2013 SCRM Awareness Toolkit Cybersecurity FlyersPamphlets...

  6. Active-R filter

    DOE Patents [OSTI]

    Soderstrand, Michael A.

    1976-01-01

    An operational amplifier-type active filter in which the only capacitor in the circuit is the compensating capacitance of the operational amplifiers, the various feedback and coupling elements being essentially solely resistive.

  7. tau_mbc14.ppt

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    with a TAU shell script TAU Performance System * Integrated toolkit for performance problem solving - Instrumentation, measurement, analysis, visualization - Portable...

  8. Identification of the meiotic toolkit in diatoms and exploration of meiosis-specific SPO11 and RAD51 homologs in the sexual species Pseudo-nitzschia multistriata and Seminavis robusta

    SciTech Connect (OSTI)

    Patil, Shrikant; Moeys, Sara; von Dassow, Peter; Huysman, Marie J. J.; Mapleson, Daniel; De Veylder, Lieven; Sanges, Remo; Vyverman, Wim; Montresor, Marina; Ferrante, Maria Immacolata

    2015-11-14

    Sexual reproduction is an obligate phase in the life cycle of most eukaryotes. Meiosis varies among organisms, which is reflected by the variability of the gene set associated to the process. Diatoms are unicellular organisms that belong to the stramenopile clade and have unique life cycles that can include a sexual phase. The exploration of five diatom genomes and one diatom transcriptome led to the identification of 42 genes potentially involved in meiosis. While these include the majority of known meiosis-related genes, several meiosis-specific genes, including DMC1, could not be identified. Furthermore, phylogenetic analyses supported gene identification and revealed ancestral loss and recent expansion in the RAD51 family in diatoms. The two sexual species Pseudo-nitzschia multistriata and Seminavis robusta were used to explore the expression of meiosis-related genes: RAD21, SPO11-2, RAD51-A, RAD51-B and RAD51-C were upregulated during meiosis, whereas other paralogs in these families showed no differential expression patterns, suggesting that they may play a role during vegetative divisions. An almost identical toolkit is shared among Pseudo-nitzschia multiseries and Fragilariopsis cylindrus, as well as two species for which sex has not been observed, Phaeodactylum tricornutum and Thalassiosira pseudonana, suggesting that these two may retain a facultative sexual phase. Lastly, our results reveal the conserved meiotic toolkit in six diatom species and indicate that Stramenopiles share major modifications of canonical meiosis processes ancestral to eukaryotes, with important divergences in each Kingdom.

  9. A Measurement

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Neutrino-Induced Charged-Current Neutral Pion Production by Robert H. Nelson B.S., University of California, Santa Barbara, 2003 A thesis submitted to the Faculty of the Graduate School of the University of Colorado in partial fulfillment of the requirements for the degree of Doctor of Philosophy Department of Physics 2010 This thesis entitled: A Measurement of Neutrino-Induced Charged-Current Neutral Pion Production written by Robert H. Nelson has been approved for the Department of Physics

  10. Available Measurement

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Instruments on the Twin Otter Available Measurement Instrument PI or Group Total aerosol number concentration Condensation Particle Counters (CPC) Up to 3 CIRPAS Aerosol/cloud size distribution d=0.1 - 2.5 µm d=0.8 - 80 µm Passive Cavity Aerosol Spectrometer Probe (PCASP) Cloud Aerosol and Precipitation Spectrometer (CAPS) CIRPAS Aerosol/cloud size distribution d=2.5 - 50 µm Forward Scattering Spectrometer Probe (FSSP) CIRPAS Cloud liquid water content Gerber PVM Johnson probe on CAPS CIRPAS

  11. A Measuring

    Office of Scientific and Technical Information (OSTI)

    Measuring Dopamine Release in the Human Brain with PET N.D. Volkow", J.S. Fowle?, G.-J. Wang, J. Loganb, 'Medical and behemistry Departments Brookhaven National Laboratory, Upton, New York, NY 11973 'Department of Psychiatry, State University of New York at Stony Brook, Stony Brook, New York 11794-8101 INTRODUCTION The dopamine system is involved in the regulation of brain regions that subserve motor, cognitive and motivational behaviors [1,2,3]. Disruptions of dopamine @A) function have

  12. Corrective Measures Process

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Corrective Measures Process Corrective Measures Process We follow a stringent corrective measures process for legacy cleanup. August 1, 2013 Corrective measures process Corrective measures process

  13. Network Activity

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Statistics Network Activity Network Activity PDSF Network Uplinks to NERSC (dual 10 Gbps) NERSC Uplink to ESnet Last edited: 2011-03-31 22:20:59...

  14. Activation detector

    DOE Patents [OSTI]

    Bell, Zane William (Oak Ridge, TN) [Oak Ridge, TN; Boatner, Lynn Allen (Oak Ridge, TN) [Oak Ridge, TN

    2009-12-08

    A method of detecting an activator, the method including impinging with an activator a receptor material lacking a photoluminescent material and generating a by-product of a radioactive decay due to the activator impinging the reeptor material. The method further including, generating light from the by-product via the Cherenkov effect and identifying a characteristic of the activator based on the light.

  15. Guide to Government Witnessing and Review of Measurement and...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of measurement and verification (M&V) activities in federal energy savings ... that government staff witness the M&V activities that are carried out by the ...

  16. Self Potential Measurements At Raft River Geothermal Area (1983...

    Open Energy Info (EERE)

    Measurements At Raft River Geothermal Area (1983) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Self Potential Measurements At Raft River...

  17. Measurement of the NIF Gunite Shielding Composition and Implications...

    Office of Scientific and Technical Information (OSTI)

    Measurement of the NIF Gunite Shielding Composition and Implications for Neutron Activation and Worker Doses Citation Details In-Document Search Title: Measurement of the NIF ...

  18. Activated carbon aerogels

    SciTech Connect (OSTI)

    Hanzawa, Y.; Kaneko, K. [Chiba Univ. (Japan)] [Chiba Univ. (Japan); Pekala, R.W. [Lawrence Livermore National Lab., CA (United States)] [Lawrence Livermore National Lab., CA (United States); Dresselhaus, M.S. [Massachusetts Inst. of Technology, Cambridge, MA (United States)] [Massachusetts Inst. of Technology, Cambridge, MA (United States)

    1996-12-25

    Activated carbon aerogels were obtained from the CO{sub 2} activation of the carbon aerogels. The adsorption isotherms of nitrogen on activated carbon aerogels at 77 K were measured and analyzed by the high-resolution {alpha}{sub s} plot to evaluate their porosities. The {alpha}{sub s} plot showed an upward deviation from linearity below {alpha}{sub s} = 0.5, suggesting that the presence of micropores becomes more predominant with the extent of the activation. Activation increased noticeably the pore volume and the surface area (the maximum value: 2600 m{sup 2}.g{sup -1}) without change of the basic network structure of primary particles. Activated carbon aerogels had a bimodal pore size distribution of uniform micropores and mesopores. 16 refs., 2 figs., 1 tab.

  19. Impedance Measurement Box

    ScienceCinema (OSTI)

    Christophersen, Jon

    2013-05-28

    Energy storage devices, primarily batteries, are now more important to consumers, industries and the military. With increasing technical complexity and higher user expectations, there is also a demand for highly accurate state-of-health battery assessment techniques. IMB incorporates patented, proprietary, and tested capabilities using control software and hardware that can be part of an embedded monitoring system. IMB directly measures the wideband impedance spectrum in seconds during battery operation with no significant impact on service life. It also can be applied to batteries prior to installation, confirming health before entering active service, as well as during regular maintenance. For more information about this project, visit http://www.inl.gov/rd100/2011/impedance-measurement-box/

  20. Corrective Measures Process

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Corrective Measures Process Corrective Measures Process We follow a stringent corrective measures process for legacy cleanup. August 1, 2013 Corrective measures process Corrective...

  1. Measurement of $\\mathrm{ t \\bar{t} } $ production with additional jet activity, including b quark jets, in the dilepton decay channel using pp collisions at $\\sqrt{s} =$ 8 TeV

    SciTech Connect (OSTI)

    Khachatryan, Vardan

    2015-10-13

    Jet multiplicity distributions in top quark pair (tt) events are measured in pp collisions at a centre-of-mass energy of 8 TeV with the CMS detector at the LHC using a data set corresponding to an integrated luminosity of 19.7 fb-1. The measurement is performed in the dilepton decay channels (e+e-+μ- and e±μ). Furthermore, the absolute and normalized differential cross sections for tt production are measured as a function of the jet multiplicity in the event for different jet transverse momentum thresholds and the kinematic properties of the leading additional jets. The differential tt-b and tt-bb- cross sections are presented for the first time as a function of the kinematic properties of the leading additional b jets. Furthermore, the fraction of events without additional jets above a threshold is measured as a function of the transverse momenta of the leading additional jets and the scalar sum of the transverse momenta of all additional jets. Finally, the data are compared and found to be consistent with predictions from several perturbative quantum chromodynamics event generators and a next-to-leading ordercalculation.

  2. Beta ray flux measuring device

    DOE Patents [OSTI]

    Impink, Jr., Albert J. (Murrysville, PA); Goldstein, Norman P. (Murrysville, PA)

    1990-01-01

    A beta ray flux measuring device in an activated member in-core instrumentation system for pressurized water reactors. The device includes collector rings positioned about an axis in the reactor's pressure boundary. Activated members such as hydroballs are positioned within respective ones of the collector rings. A response characteristic such as the current from or charge on a collector ring indicates the beta ray flux from the corresponding hydroball and is therefore a measure of the relative nuclear power level in the region of the reactor core corresponding to the specific exposed hydroball within the collector ring.

  3. PRECISE CHARGE MEASUREMENT FOR LASER PLASMA ACCELERATORS

    SciTech Connect (OSTI)

    Nakamura, Kei; Gonsalves, Anthony; Lin, Chen; Sokollik, Thomas; Shiraishi, Satomi; Tilborg, Jeroen van; Osterhoff, Jens; Donahue, Rich; Rodgers, David; Smith, Alan; Byrne, Warren; Leemans, Wim

    2011-07-19

    Cross-calibrations of charge diagnostics are conducted to verify their validity for measuring electron beams produced by laser plasma accelerators (LPAs). Employed diagnostics are a scintillating screen, activation based measurement, and integrating current transformer. The diagnostics agreed within {+-}8 %, showing that they can provide accurate charge measurements for LPAs provided they are used properly.

  4. NREL: Measurements and Characterization - Measurement Process

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Measurement Process For devices that come to the National Renewable Energy Laboratory (NREL) for performance measurement, we typically follow a procedure that ensures quality measurement and follow-up. After logging in the device based on information from a cover letter or request form, we measure its area, which is crucial for determining its efficiency. We then obtain its spectral responsivity. For cells, we measure the spectral responsivity with one of two systems. For modules, however,

  5. ARM - Measurement - Snow depth

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Send Measurement : Snow depth Snow depth measured at the surface Categories Surface Properties Instruments The above measurement is considered scientifically relevant for the...

  6. ARM - Measurement - Hydrometeor size

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of a hydrometeor, measured directly or derived from other measurements. Categories Cloud Properties Instruments The above measurement is considered scientifically relevant for the...

  7. Catalyst activator

    DOE Patents [OSTI]

    McAdon, Mark H.; Nickias, Peter N.; Marks, Tobin J.; Schwartz, David J.

    2001-01-01

    A catalyst activator particularly adapted for use in the activation of metal complexes of metals of Group 3-10 for polymerization of ethylenically unsaturated polymerizable monomers, especially olefins, comprising two Group 13 metal or metalloid atoms and a ligand structure including at least one bridging group connecting ligands on the two Group 13 metal or metalloid atoms.

  8. Federal Biomass Activities

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Budget Federal Biomass Activities Federal Biomass Activities Biopower Biopower Biofuels Biofuels Bioproducts Bioproducts Federal Biomass Activities Federal Biomass Activities ...

  9. Activity report

    SciTech Connect (OSTI)

    Yu, S W

    2008-08-11

    This report is aimed to show the author's activities to support the LDRD. The title is 'Investigation of the Double-C Behavior in the Pu-Ga Time-Temperature-Transformation Diagram' The sections are: (1) Sample Holder Test; (2) Calculation of x-ray diffraction patterns; (3) Literature search and preparing publications; (4) Tasks Required for APS Experiments; and (5) Communications.

  10. ARM - Measurement - Vertical velocity

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    assurance purposes. ARM Instruments CO2FLX : Carbon Dioxide Flux Measurement Systems DL : Doppler Lidar ECOR : Eddy Correlation Flux Measurement System KAZR : Ka ARM Zenith Radar...

  11. ARM - Measurement - Cloud size

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    measurements as cloud thickness, cloud area, and cloud aspect ratio. Categories Cloud Properties Instruments The above measurement is considered scientifically relevant for the...

  12. ARM - Measurement - Cloud type

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Measurement : Cloud type Cloud type such as cirrus, stratus, cumulus etc Categories Cloud Properties Instruments The above measurement is considered scientifically relevant for the...

  13. ARM - Measurement - Atmospheric turbulence

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    : Carbon Dioxide Flux Measurement Systems ECOR : Eddy Correlation Flux Measurement System KASACR : Ka-Band Scanning ARM Cloud Radar SODAR : Mini Sound Detection and Ranging RWP...

  14. Measuring Energy Achievements

    Broader source: Energy.gov [DOE]

    This presentation covers types of energy measurements essential to industrial facilities and discusses the benefits of metrics. ArcelorMittal provides examples from their experience measuring energy achievements.

  15. Climate Measurement & Modeling

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Sandia Home Locations Contact Us Employee Locator Energy & Climate Secure & Sustainable ... Climate & Earth Systems Climate Measurement & Modeling Arctic Climate Measurements Global ...

  16. ARM - Measurement - Nitrogen

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Send Measurement : Nitrogen All gaseous compounds of nitrogen including N2, N2O, and NOx. Categories Atmospheric State Instruments The above measurement is considered...

  17. ARM - Measurement - Ozone Concentration

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Measurement : Ozone Concentration The atmospheric concentration or volume mixing ratio (mole fraction) of Ozone Categories Atmospheric State Instruments The above measurement is...

  18. Laboratory Activities

    SciTech Connect (OSTI)

    Brown, Christopher F.; Serne, R. Jeffrey

    2008-01-17

    This chapter summarizes the laboratory activities performed by PNNLs Vadose Zone Characterization Project in support of the Tank Farm Vadose Zone Program, led by CH2M HILL Hanford Group, Inc. The results of these studies are contained in numerous reports (Lindenmeier et al. 2002; Serne et al. 2002a, 2002b, 2002c, 2002d, 2002e; Lindenmeier et al. 2003; Serne et al. 2004a, 2004b; Brown et al. 2005, 2006a, 2007; Serne et al. 2007) and have generated much of the data reported in Chapter 22 (Geochemistry-Contaminant Movement), Appendix G (Geochemistry-Contaminant Movement), and Cantrell et al. (2007, SST WMA Geochemistry Data Package in preparation). Sediment samples and characterization results from PNNLs Vadose Zone Characterization Project are also shared with other science and technology (S&T) research projects, such as those summarized in Chapter 12 (Associated Science Activities).

  19. Measurement of reaction-in-flight neutrons using thulium activation...

    Office of Scientific and Technical Information (OSTI)

    Subject: Instrumentation Related to Nuclear Science & Technology(46); Nuclear Physics & Radiation Physics(73); Plasma Physics & Fusion Technology(70); Radiation Chemistry, ...

  20. Guide to Government Witnessing and Review of Measurement and...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of measurement and verification (M&V) activities in Federal energy savings performance contract (ESPC) projects. Witnessing of M&V activities is a part of the process of ...

  1. NREL: Measurements and Characterization - Device Performance Measurement

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Device Performance Measurement The National Renewable Energy Laboratory is the premier U.S. Department of Energy (DOE) research laboratory for testing performance of commercial, developmental, and research photovoltaic (PV) devices. We measure the performance PV cells and modules of any size or technology with respect to standard reporting conditions-defined as a reference temperature (25°C), total irradiance (1000 W/m2), andspectral irradiance distribution (IEC standard 60904-3, ASTM standard

  2. NREL: Measurements and Characterization - About Measurements and

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Characterization About Measurements and Characterization Graphic of three intersecting circles depicting the M&C modes of support, collaborative R&D, and technique development. The modes of operation for the M&C group at NREL integrates support, collaborative R&D, and technique development. The Measurements and Characterization (M&C) division at the National Renewable Energy Laboratory and the National Center for Photovoltaics provides characterization support,

  3. Eco-efficiency Indicators: Measuring Resource-use Efficiency...

    Open Energy Info (EERE)

    Eco-efficiency Indicators: Measuring Resource-use Efficiency and the Impact of Economic Activities on the Environment Jump to: navigation, search Tool Summary LAUNCH TOOL Name:...

  4. Measurement and Verification for Federal Energy Savings Performance...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Contracts Measurement and verification (M&V) activities help agencies confirm that ... When done correctly, M&V: Appropriately allocates risks Reduces uncertainty of savings ...

  5. Neutron Spectrum Measurements from Irradiations at NCERC (Conference...

    Office of Scientific and Technical Information (OSTI)

    It was concluded that MCNP simulated spectra agree with experimental measurements, with the caveats that some data are limited by statistics at low-energies and some activation ...

  6. Program Planning Guide | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    SEP Presentations Materials SEP Toolkit Overview The Cummins Rocky Mount Engine Plant Case Study Advanced Manufacturing Home Key Activities Research & Development Projects ...

  7. Complex Queries | Open Energy Information

    Open Energy Info (EERE)

    Electricity Markets Afghanistan-NREL Mission Afghanistan-NREL Resource Maps and Toolkits China-NREL Cooperation Dominica Island-NREL Cooperation Egypt-NREL Energy Activities...

  8. Temperature Measurements in the Magnetic Measurement Facility

    SciTech Connect (OSTI)

    Wolf, Zachary

    2010-12-13

    Several key LCLS undulator parameter values depend strongly on temperature primarily because of the permanent magnet material the undulators are constructed with. The undulators will be tuned to have specific parameter values in the Magnetic Measurement Facility (MMF). Consequently, it is necessary for the temperature of the MMF to remain fairly constant. Requirements on undulator temperature have been established. When in use, the undulator temperature will be in the range 20.0 {+-} 0.2 C. In the MMF, the undulator tuning will be done at 20.0 {+-} 0.1 C. For special studies, the MMF temperature set point can be changed to a value between 18 C and 23 C with stability of {+-}0.1 C. In order to ensure that the MMF temperature requirements are met, the MMF must have a system to measure temperatures. The accuracy of the MMF temperature measurement system must be better than the {+-}0.1 C undulator tuning temperature tolerance, and is taken to be {+-}0.01 C. The temperature measurement system for the MMF is under construction. It is similar to a prototype system we built two years ago in the Sector 10 alignment lab at SLAC. At that time, our goal was to measure the lab temperature to {+-}0.1 C. The system has worked well for two years and has maintained its accuracy. For the MMF system, we propose better sensors and a more extensive calibration program to achieve the factor of 10 increase in accuracy. In this note we describe the measurement system under construction. We motivate our choice of system components and give an overview of the system. Most of the software for the system has been written and will be discussed. We discuss error sources in temperature measurements and show how these errors have been dealt with. The calibration system is described in detail. All the LCLS undulators must be tuned in the Magnetic Measurement Facility at the same temperature to within {+-}0.1 C. In order to ensure this, we are building a system to measure the temperature of the undulators to {+-}0.01 C. This note describes the temperature measurement system under construction.

  9. Asian Development Bank - Transport | Open Energy Information

    Open Energy Info (EERE)

    sectorstransportmain Transport Toolkit Region(s): Asia Related Tools TRANSfer - Towards climate-friendly transport technologies and measures List of Publications from GIZ...

  10. ARM - Measurement - Ozone

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    We would love to hear from you Send us a note below or call us at 1-888-ARM-DATA. Send Measurement : Ozone Ozone measurements are given in Dobson units and are integers with 3...

  11. Downhole steam quality measurement

    DOE Patents [OSTI]

    Lee, David O.; Montoya, Paul C.; Muir, James F.; Wayland, Jr., J. Robert

    1987-01-01

    An empirical method for the remote sensing of steam quality that can be easily adapted to downhole steam quality measurements by measuring the electrical properties of two-phase flow across electrode grids at low frequencies.

  12. ARM - Measurement - Lightning stroke

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    govMeasurementsLightning stroke ARM Data Discovery Browse Data Comments? We would love to hear from you Send us a note below or call us at 1-888-ARM-DATA. Send Measurement :...

  13. ARM - Measurement - Soil characteristics

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Measurement : Soil characteristics Includes available water capacity, bulk density, permeability, porosity, rock fragment classification, rock fragment volume, percent clay,...

  14. Impedance Measurement Box

    Energy Science and Technology Software Center (OSTI)

    2014-11-20

    The IMB 50V software provides functionality for design of impedance measurement tests or sequences of tests, execution of these tests or sequences, processing measured responses and displaying and saving of the results. The software consists of a Graphical User Interface that allows configuration of measurement parameters and test sequencing, a core engine that controls test sequencing, execution of measurements, processing and storage of results and a hardware/software data acquisition interface with the IMB hardware system.

  15. Atmospheric Radiation Measurement Program

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    3 ARM 2003 Tom Ackerman Chief Scientist Tom Ackerman Chief Scientist ARM ARM Atmospheric Radiation Measurement Atmospheric Radiation Measurement WARNING! WARNING! Today is April 1 But that has NO bearing on this message Today is April 1 But that has NO bearing on this message ARM ARM Atmospheric Radiation Measurement Atmospheric Radiation Measurement Two Topics Two Topics * Status of ARM (quick overview) * Science plan - ARM in the next 5 years * Status of ARM (quick overview) * Science plan -

  16. Electrolyte measurement device and measurement procedure

    DOE Patents [OSTI]

    Cooper, Kevin R.; Scribner, Louie L.

    2010-01-26

    A method and apparatus for measuring the through-thickness resistance or conductance of a thin electrolyte is provided. The method and apparatus includes positioning a first source electrode on a first side of an electrolyte to be tested, positioning a second source electrode on a second side of the electrolyte, positioning a first sense electrode on the second side of the electrolyte, and positioning a second sense electrode on the first side of the electrolyte. current is then passed between the first and second source electrodes and the voltage between the first and second sense electrodes is measured.

  17. Coordinate measuring system

    DOE Patents [OSTI]

    Carlisle, Keith (Discovery Bay, CA)

    2003-04-08

    An apparatus and method is utilized to measure relative rigid body motion between two bodies by measuring linear motion in the principal axis and linear motion in an orthogonal axis. From such measurements it is possible to obtain displacement, departure from straightness, and angular displacement from the principal axis of a rigid body.

  18. Resources | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Voluntary Initiative Toolkits Training Toolkit Social Media Toolkit Designing Incentives ... Voluntary Initiative: Training Toolkit Social Media Toolkit Determine the best social ...

  19. NREL: International Activities - Philippines Wind Resource Maps and Data

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    A map depicting wind resources at 100 meters of the republic of the Philippines. Additional Resources Wind Prospector A web-based GIS applications designed to support resource assessment and data exploration associated with wind development. Philippines Wind Viewer Tutorial Learn how to navigate, display, query and download Philippines data in the Wind Prospector. Philippines Geospatial Toolkit EXE 926.5 MB Philippines Wind Resource Maps and Data In 2014, under the Enhancing Capacity for Low

  20. Dosimetry and cross section measurements at RTNS II

    SciTech Connect (OSTI)

    Greenwood, L.R.; Kneff, D.W.

    1987-01-01

    Numerous measurements have been conducted at TRNS-II in order to map the neutron field for materials irradiations, to measure activation cross sections, and to measure helium production cross sections. Experiments of up to two weeks duration irradiated large numbers of activation dosimetry and helium samples both close to the source and throughout the target room. Many other samples have been irradiated in piggy-back positions over periods lasting many months. All of these experiments fall into four main classes, namely, fluence-mapping, activation dosimetry, the production of long-lived isotopes, and helium generation measurements. Radiometric dosimetry and activation cross section measurements were performed at Argonne National Laboratory; helium production was measured at Rockwell International Corporation. This paper briefly summarizes the principal results of our measurements at RTNS-II; references are given for more detailed publications. 14 refs., 4 figs.

  1. Current measurement apparatus

    DOE Patents [OSTI]

    Umans, Stephen D.

    2008-11-11

    Apparatus and methods are provided for a system for measurement of a current in a conductor such that the conductor current may be momentarily directed to a current measurement element in order to maintain proper current without significantly increasing an amount of power dissipation attributable to the current measurement element or adding resistance to assist in current measurement. The apparatus and methods described herein are useful in superconducting circuits where it is necessary to monitor current carried by the superconducting elements while minimizing the effects of power dissipation attributable to the current measurement element.

  2. Asian Co-benefits Partnership (ACP) Toolkit | Open Energy Information

    Open Energy Info (EERE)

    and information to help mainstream climate and developmental co-benefits into decision-making processes in Asia." The Tookit "offers recent publication from ACP member...

  3. On-Bill Financing for Energy Efficiency Improvements Toolkit

    Broader source: Energy.gov [DOE]

    Provides some benefits and barriers to on-bill programs. Author: American Counsel for Energy-Efficient Economy

  4. Project Screening and Design Toolkit | Open Energy Information

    Open Energy Info (EERE)

    public and private sector capacity to support initiatives 2.4. Assess and improve the national GHG inventory and other economic and resource data as needed for LEDS development...

  5. Sustainable Land-use Impact Assessment Toolkit | Open Energy...

    Open Energy Info (EERE)

    public and private sector capacity to support initiatives 2.4. Assess and improve the national GHG inventory and other economic and resource data as needed for LEDS development...

  6. Workplace Charging Toolkit: Workshop Host Outreach Letter Template

    Broader source: Energy.gov [DOE]

    Approach employers in your community that already have workplace charging to serve as a workshop host.

  7. Toolkit for Integrated Impact Assessments version 1.0

    Energy Science and Technology Software Center (OSTI)

    2007-05-14

    TIIA is designed to perform ecological and human risk assessments for environmental contaminants in air, water, soil, and sediment. It uses a novel approach that applies to radionuclides and hazardous chemicals, based on a food web approach. Stochastic calculations (i.e., those that allow for propagation of uncertainty in a numerical fashion) are allowed.

  8. Highly Asynchronous VisitOr Queue Graph Toolkit

    Energy Science and Technology Software Center (OSTI)

    2012-10-01

    HAVOQGT is a C++ framework that can be used to create highly parallel graph traversal algorithms. The framework stores the graph and algorithmic data structures on external memory that is typically mapped to high performance locally attached NAND FLASH arrays. The framework supports a vertex-centered visitor programming model. The frameworkd has been used to implement breadth first search, connected components, and single source shortest path.

  9. Rapid Toolkit Stakeholder Trial Demonstration | Department of Energy

    Energy Savers [EERE]

    Range Fuels Biorefinery Groundbreaking Range Fuels Biorefinery Groundbreaking November 6, 2007 - 5:00pm Addthis Remarks as Prepared for Secretary Bodman Thank you. And let me say how much it means to have my old friend Vinodh here to introduce me. You are a true pioneer in this industry. I also want to thank Mitch for asking me to be here. It's good to see Tom Dorr from the U.S. Department of Agriculture, our partner in so much of the federal government's biomass research and development and

  10. Utilizing The US Climate Resilience Toolkit | Department of Energy

    Energy Savers [EERE]

    Using Maps to Predict Solar Futures Using Maps to Predict Solar Futures June 19, 2015 - 1:43pm Addthis Using Maps to Predict Solar Futures Dr. Lidija Sekaric Dr. Lidija Sekaric Solar Energy Technologies Office Director When first exploring the possibility of going solar, many consumers have questions: How many panels will I need for my rooftop? What is this going to cost me? How much will I save on my electricity bills? Awardees of the Energy Department's SunShot Initiative are working to help

  11. LEDSGP/Transportation Toolkit/Training | Open Energy Information

    Open Energy Info (EERE)

    and Programs - Dario Hidalgo, World Resources Institute-EMBARQ Videos and Presentations Alternative Fuels and Advanced Vehicles U.S. Clean Cities TV Clean Cities TV is the...

  12. LEDSGP/Transportation Toolkit/Training | Open Energy Information

    Open Energy Info (EERE)

    petroleum consumption in transportation. Car Sharing Robin Chase on Zipcar and her next big idea Robin Chase founded Zipcar, the world's biggest car-sharing business. With...

  13. Renewable Energy Technical Potential Toolkit | Open Energy Information

    Open Energy Info (EERE)

    energy access universal? International Energy Agency Technical report Poor People's Energy Outlook 2010 Practical Action Technical report Solar design T-square Brian White...

  14. Policy and Program Design Toolkit | Open Energy Information

    Open Energy Info (EERE)

    of Diesel Buses to Compressed Natural Gas How to implement renewable energy and energy efficiency options Support for South African local government Hydrogen Analysis (H2A)...

  15. Energy System and Scenario Analysis Toolkit | Open Energy Information

    Open Energy Info (EERE)

    other technologies. Biomass Biomass Energy Data Book Buildings Buildings Energy Data Book Hydrogen Hydrogen Energy Data Book Marine and Hydrokinetic Technology Marine and...

  16. Technology Cost and Performance Toolkit | Open Energy Information

    Open Energy Info (EERE)

    little attention at the policy level as an important component of a national strategy. Hydrogen U.S. National Hydrogen Energy Roadmap Solar Open PV Project Open PV provides a...

  17. USAID Toolkit for Increasing Energy Access | Open Energy Information

    Open Energy Info (EERE)

    Change (UNFCCC), UNEP, United Nations Foundation Sector: Energy Focus Area: Renewable Energy, Energy Efficiency, People and Policy Phase: Evaluate Options, Develop Goals, Prepare...

  18. Hands-on Energy Adaptation Toolkit (HEAT) | Open Energy Information

    Open Energy Info (EERE)

    Management Assistance Program of the World Bank Sector: Energy Focus Area: Renewable Energy Topics: Adaptation, Implementation, Pathways analysis Resource Type: Guidemanual...

  19. Renewable Energy Technical Potential Toolkit | Open Energy Information

    Open Energy Info (EERE)

    as suitable for development and applies current technology energy conversion efficiency to the available resource in those areas. As renewable technologies improve...

  20. Advanced Network Toolkit for Assessments and Remote Mapping ...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    More Documents & Publications New No-Cost ANTFARM Tool Maps Control System Networks to Help Implement Cyber Security Standards National SCADA Test Bed - Enhancing control systems ...

  1. LEDSGP/Transportation Toolkit/Key Actions/Assess Opportunities...

    Open Energy Info (EERE)

    framework are intended to guide decision makers rather than prescribe a specific methodology. Evaluate the System Assess the current transportation situation in your country or...

  2. LEDSGP/Transportation Toolkit/Key Actions | Open Energy Information

    Open Energy Info (EERE)

    framework are intended to guide decision makers rather than prescribe a specific methodology. Evaluate the System Assess the current transportation situation in your country or...

  3. LEDSGP/Transportation Toolkit/Key Actions/Develop Alternative...

    Open Energy Info (EERE)

    framework are intended to guide decision makers rather than prescribe a specific methodology. Evaluate the System Assess the current transportation situation in your country or...

  4. Fact Sheet: Cyber Security Audit and Attack Detection Toolkit

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    SEM, and transform this information into meta events that the enterprise SEM can detect. ... security events from data and develop meta events that will be detected as cyber ...

  5. Guidelines and Toolkits for Urban Transport Development in Medium...

    Open Energy Info (EERE)

    from the LEDS Global Partnership. When to Use This Tool While building a low emission strategy for your country's transportation system, this tool is most useful during these...

  6. UNEP Toolkit for Clean Fleet Strategy Development | Open Energy...

    Open Energy Info (EERE)

    strategy for reducing the envrionmental impacts of your fleet. To develop your own fleet strategy you need to follow the steps below. Start with opening the Step by Step action...

  7. LEDSGP/Transportation Toolkit/Strategies/Improve | Open Energy...

    Open Energy Info (EERE)

    petroleum fuels; alternative fuels (such as ethanol, biodiesel, natural gas, and propane; hydrogen fuel-cell systems; and electric rechargeable battery systems. System Level...

  8. LEDSGP/Transportation Toolkit/Strategies/Shift | Open Energy...

    Open Energy Info (EERE)

    petroleum fuels; alternative fuels (such as ethanol, biodiesel, natural gas, and propane; hydrogen fuel-cell systems; and electric rechargeable battery systems. System Level...

  9. LEDSGP/Transportation Toolkit/Strategies/Avoid | Open Energy...

    Open Energy Info (EERE)

    petroleum fuels; alternative fuels (such as ethanol, biodiesel, natural gas, and propane; hydrogen fuel-cell systems; and electric rechargeable battery systems. System Level...

  10. LEDSGP/Transportation Toolkit/Strategies | Open Energy Information

    Open Energy Info (EERE)

    petroleum fuels; alternative fuels (such as ethanol, biodiesel, natural gas, and propane; hydrogen fuel-cell systems; and electric rechargeable battery systems. System Level...

  11. NOAA Webinar: The U.S. Climate Resilience Toolkit

    Broader source: Energy.gov [DOE]

    This series is co-sponsored by the NOAA Sectoral Applications Research Program (SARP), US National Integrated Drought Information System (NIDIS), Water Research Foundation, Water Environment...

  12. Voluntary Initiative: Partnership Toolkit, from the U.S. Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... is Why it's important Scenarios Stakeholder Analysis Stakeholder Prioritization Stakeholder chart 11 Click to edit Master title style Click to edit Master ...

  13. Energy System and Scenario Analysis Toolkit | Open Energy Information

    Open Energy Info (EERE)

    energy statistics for 215 countries. The statistics include crude oil production, oil consumption, natural gas production and consumption, electricity generation and...

  14. Information Toolkit for post-2012 climate policies | Open Energy...

    Open Energy Info (EERE)

    Organization: Energy Research Centre of the Netherlands Partner: Brinkman Climate Change Sector: Energy Topics: Co-benefits assessment, Policiesdeployment programs, Pathways...

  15. Land-use Scenario Analysis Toolkit | Open Energy Information

    Open Energy Info (EERE)

    and Energy Global Change Assessment Model (GCAM) Dynamic-recursive model GCAM Model Pacific Northwest National Laboratory Resources by Type Tools Click Sort key.JPG to sort by...

  16. Clean Air-Cool Planet Community Toolkit | Open Energy Information

    Open Energy Info (EERE)

    conservation, renewable energy (the resource focuses on wind power, solar power, and methane recovery), green power, transportation, waste, and land-use programs. Each topic is...

  17. LEDSGP/DIA-Toolkit/Factors | Open Energy Information

    Open Energy Info (EERE)

    expanded solar energy, the impact of switching from imported fossil fuels to solar power may improve public health through improved air quality. Environmental Air -...

  18. Energy System and Scenario Analysis Toolkit | Open Energy Information

    Open Energy Info (EERE)

    for 215 countries. The statistics include crude oil production, oil consumption, natural gas production and consumption, electricity generation and consumption, primary energy,...

  19. Property:TransportToolkit/Regions | Open Energy Information

    Open Energy Info (EERE)

    America + B Bike-Sharing:History, Impacts, Models of Provision, and Future + Global + Biodiesel Handling and Use Guide + Global +, Australia & North America + Bus Rapid Transit...

  20. Design and performance of a scalable, parallel statistics toolkit.

    SciTech Connect (OSTI)

    Thompson, David C.; Bennett, Janine Camille; Pebay, Philippe Pierre

    2010-11-01

    Most statistical software packages implement a broad range of techniques but do so in an ad hoc fashion, leaving users who do not have a broad knowledge of statistics at a disadvantage since they may not understand all the implications of a given analysis or how to test the validity of results. These packages are also largely serial in nature, or target multicore architectures instead of distributed-memory systems, or provide only a small number of statistics in parallel. This paper surveys a collection of parallel implementations of statistics algorithm developed as part of a common framework over the last 3 years. The framework strategically groups modeling techniques with associated verification and validation techniques to make the underlying assumptions of the statistics more clear. Furthermore it employs a design pattern specifically targeted for distributed-memory parallelism, where architectural advances in large-scale high-performance computing have been focused. Moment-based statistics (which include descriptive, correlative, and multicorrelative statistics, principal component analysis (PCA), and k-means statistics) scale nearly linearly with the data set size and number of processes. Entropy-based statistics (which include order and contingency statistics) do not scale well when the data in question is continuous or quasi-diffuse but do scale well when the data is discrete and compact. We confirm and extend our earlier results by now establishing near-optimal scalability with up to 10,000 processes.

  1. Afghanistan-NREL Resource Maps and Toolkits | Open Energy Information

    Open Energy Info (EERE)

    partnered with Afghanistan to develop high-resolution wind and solar resource maps and data products for Afghanistan. The data were output in Geographic Information Systems (GIS)...

  2. LEDSGP/Transportation Toolkit/Key Actions/Develop Alternative...

    Open Energy Info (EERE)

    and Plan Prioritize alternative development scenarios based on factors such as economic, environmental, and social benefits & costs, technical & institutional capacity & barriers,...

  3. LEDSGP/Transportation Toolkit/Key Actions/Assess Opportunities...

    Open Energy Info (EERE)

    and Plan Prioritize alternative development scenarios based on factors such as economic, environmental, and social benefits & costs, technical & institutional capacity & barriers,...

  4. LEDSGP/Transportation Toolkit/Key Actions | Open Energy Information

    Open Energy Info (EERE)

    and Plan Prioritize alternative development scenarios based on factors such as economic, environmental, and social benefits & costs, technical & institutional capacity & barriers,...

  5. File:RAPID Toolkit Flyer.pdf | Open Energy Information

    Open Energy Info (EERE)

    2 pages) 2-pg flyer giving an overview of the GRR project File history Click on a datetime to view the file as it appeared at that time. DateTime Thumbnail Dimensions User...

  6. Grid-Connected Renewable Energy Generation Toolkit-Wind | Open...

    Open Energy Info (EERE)

    Agency for International Development Sector: Energy Focus Area: Wind Resource Type: Training materials Website: www.energytoolbox.orggcremod6index.shtml Grid-Connected...

  7. Grid-Connected Renewable Energy Generation Toolkit-Solar | Open...

    Open Energy Info (EERE)

    Agency for International Development Sector: Energy Focus Area: Solar Resource Type: Training materials Website: www.energytoolbox.orggcremod5index.shtml Grid-Connected...

  8. Grid-Connected Renewable Energy Generation Toolkit-Geothermal...

    Open Energy Info (EERE)

    for International Development Sector: Energy Focus Area: Geothermal Resource Type: Training materials Website: www.energytoolbox.orggcremod3index.shtml Grid-Connected...

  9. Grid-Connected Renewable Energy Generation Toolkit-Hydroelectric...

    Open Energy Info (EERE)

    United States Agency for International Development Sector: Energy Resource Type: Training materials Website: www.energytoolbox.orggcremod4index.shtml Grid-Connected...

  10. THYME: Toolkit for Hybrid Modeling of Electric Power Systems

    Energy Science and Technology Software Center (OSTI)

    2011-01-01

    THYME is an object oriented library for building models of wide area control and communications in electric power systems. This software is designed as a module to be used with existing open source simulators for discrete event systems in general and communication systems in particular. THYME consists of a typical model for simulating electro-mechanical transients (e.g., as are used in dynamic stability studies), data handling objects to work with CDF and PTI formatted power flowmore » data, and sample models of discrete sensors and controllers.« less

  11. Template:RegulatoryToolkitTabs | Open Energy Information

    Open Energy Info (EERE)

    source History View New Pages Recent Changes All Special Pages Semantic SearchQuerying Get Involved Help Apps Datasets Community Login | Sign Up Search Template Edit History...

  12. LEDSGP/DIA-Toolkit/Tools | Open Energy Information

    Open Energy Info (EERE)

    (LEDS) on country development goals. These resources focus on strategies to reduce poverty, improve health and local environment quality, improve energy and water access,...

  13. World Bank Renewable Energy Toolkit | Open Energy Information

    Open Energy Info (EERE)

    of a Monitoring and Evaluation Plan Audit of Solar Home Systems Project Mid-term Review Panel for Solar Home Systems Project Socio-Economic Survey of the Photovoltaic Pilot...

  14. Renewable Energy Technical Potential Toolkit | Open Energy Information

    Open Energy Info (EERE)

    cell would only have one value for solar resource, which represents the annual average solar resource (GHI, for PV analysis) for the entire area covered by the grid cell....

  15. Simulation Toolkit Promises Better Wind Predictions, Increased Farm Production

    Broader source: Energy.gov [DOE]

    Wind farm production frequently falls short of expectations. Poor forecasts of low-altitude winds, suboptimal wind plant design and operation, and higher-than-expected downtimes and maintenance...

  16. Category:LEDSGP Development Impacts Assessment Toolkits | Open...

    Open Energy Info (EERE)

    Model S SEAGA Intermediate Level Handbook SimCLIM Simple Interactive Models for better air quality (SIM-air) Simplified Approach for Estimating Impacts of Electricity Generation...

  17. LEDSGP/Transportation Toolkit/Strategies | Open Energy Information

    Open Energy Info (EERE)

    and dual-fuel vehicles); non-petroleum fuel vehicles (such as natural gas, hydrogen fuel cell, and battery electric vehicles); and vehicle component improvements...

  18. LEDSGP/Transportation Toolkit/Strategies/Shift | Open Energy...

    Open Energy Info (EERE)

    and dual-fuel vehicles); non-petroleum fuel vehicles (such as natural gas, hydrogen fuel cell, and battery electric vehicles); and vehicle component improvements...

  19. LEDSGP/Transportation Toolkit/Strategies/Avoid | Open Energy...

    Open Energy Info (EERE)

    and dual-fuel vehicles); non-petroleum fuel vehicles (such as natural gas, hydrogen fuel cell, and battery electric vehicles); and vehicle component improvements...

  20. LEDSGP/Transportation Toolkit/Strategies/Improve | Open Energy...

    Open Energy Info (EERE)

    and dual-fuel vehicles); non-petroleum fuel vehicles (such as natural gas, hydrogen fuel cell, and battery electric vehicles); and vehicle component improvements...

  1. Cyber Security Audit and Attack Detection Toolkit: Bandolier...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    optimize the security of their control system configuration using Bandolier Security Audit Files, which assess the current configuration against an optimal security configuration. ...

  2. File:RAPID Toolkit Flyer.pdf | Open Energy Information

    Open Energy Info (EERE)

    pdf, 2 pages) 2-pg flyer giving an overview of the GRR project File history Click on a datetime to view the file as it appeared at that time. DateTime Thumbnail Dimensions User...

  3. The structural simulation toolkit :a tool for exploring parallel...

    Office of Scientific and Technical Information (OSTI)

    States Language: English Subject: 99 GENERAL AND MISCELLANEOUSMATHEMATICS, COMPUTING, AND INFORMATION SCIENCE; COMPUTERIZED SIMULATION; COMPUTER ARCHITECTURE; COMPUTER CODES

  4. The structural simulation toolkit : a tool for bridging thearchitectu...

    Office of Scientific and Technical Information (OSTI)

    Architecture (ISCA 2005) held June 4-8, 2004 in Madison, WI.; Related Information: Proposed for presentation at the International Symposium on Computer Architecture (ISCA ...

  5. NREL: Wind Research - NREL's WIND Toolkit Provides the Data Needed...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    by the numerical model. Barometric pressure, wind speed and direction (at 100 m above ground level), relative humidity, temperature, and air density data are available via an...

  6. Category:RAPID Toolkit Library | Open Energy Information

    Open Energy Info (EERE)

    of Water Resources 2 C.C.R. 410 - Rules and Regulations for the Management and Control of Designated Ground Water 2 CCR 402-10 - Rules and Regulations for Geothermal Well...

  7. LEDSGP/DIA-Toolkit/How To | Open Energy Information

    Open Energy Info (EERE)

    may want to improve energy access of rural communities, decrease reliance on imported fossil fuels, or increase jobs. 3. What tools and methodologies are available for impact...

  8. Outreach Toolkit - Energy Explained, Your Guide To Understanding Energy

    Gasoline and Diesel Fuel Update (EIA)

    Oil inventories in industrialized countries to reach record high at end of 2015 The amount of year-end oil inventories held in industrialized countries is expected to be the highest on record in 2015. In its monthly forecast, the U.S. Energy Information Administration said it expects commercial oil inventories in the United States and other industrialized countries to total 2.83 billion barrels at the end of this year almost 90 million barrels more than at the end of 2014. Global oil production

  9. Greenhouse Gas Inventory Development Toolkit | Open Energy Information

    Open Energy Info (EERE)

    an Application of the EX-Ante Carbon-balance Tool (EX-ACT) Financial and Cost Assessment Model (FICAM) Forest Carbon Index Forest Carbon Portal Forest Monitoring for Action...

  10. News Release: Advanced Network Toolkit for Assessments and Remote...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    for network mapping can be costly, and these tools can disrupt control system function. ... tools (e.g., traceroute, Nmap), network device configuration files, traffic logs, etc. ...

  11. Structural Simluation Toolkit (SST) V 2.0

    Energy Science and Technology Software Center (OSTI)

    2009-12-04

    The SST provides a parallel framework to perform system simulation of computer architectures to determine their performance and power consumption. Additionally, the SST contains basic models of a computer processor, and interconnect and can connect to an external memory simulator (DRAMSim II). The SST framework provides a simple interface by which other computer simulation models can be combined under a common parallel discrete event-based simulation environment. This allows design exploration of future architectures, analysis ofmore » how current computer programs will function on future architectures. The SST provides a parallel discrete event simulation framework, including partitioning and object distribution over MPI. It also provides a mechanism by which components can report their power consumption for analysis.« less

  12. Toolkit for Public-Private Partnerships in Roads and Highways...

    Open Energy Info (EERE)

    World Bank Sector: Energy Focus Area: Transportation Resource Type: Guidemanual User Interface: Website Website: www.ppiaf.orgppiafsitesppiaf.orgfilesdocuments...

  13. Model Analysis ToolKit (MATK), Version 0

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Version 0 MATK provides basic functionality to facilitate model analysis within the Python computational environment. June 19, 2015 software MATK provides basic functionality to...

  14. Measuring and Understanding Memory Bandwidth

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Measuring and Understanding Memory Bandwidth Measuring and Understanding Memory Bandwidth Measuring Bandwidth Usage Measuring memory bandwidth is a good way of understanding how...

  15. ARM - CLASIC Measurement Platforms

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Measurement Platforms Related Links CLASIC Home AAF Home ARM Data Discovery Browse Data Post-Campaign CLASIC/CHAPS Special Session at AGU Annual Meeting, December 15-19 CLASIC Workshop, March 26-27 Data Sets Deployment Resources Measurement Platforms PNNL WRF-CuP Forecast Cloud Physics Lidar MODIS Airborne Simulator Data Mesonet Monitoring ARM Data Plots Experiment Planning CLASIC Proposal Abstract Science Questions Science and Implementation Plan (pdf) Measurement Platforms (pdf) CLASIC-Land

  16. Current measuring system

    DOE Patents [OSTI]

    Dahl, David A.; Appelhans, Anthony D.; Olson, John E.

    1997-01-01

    A current measuring system comprising a current measuring device having a first electrode at ground potential, and a second electrode; a current source having an offset potential of at least three hundred volts, the current source having an output electrode; and a capacitor having a first electrode electrically connected to the output electrode of the current source and having a second electrode electrically connected to the second electrode of the current measuring device.

  17. Current measuring system

    DOE Patents [OSTI]

    Dahl, D.A.; Appelhans, A.D.; Olson, J.E.

    1997-09-09

    A current measuring system is disclosed comprising a current measuring device having a first electrode at ground potential, and a second electrode; a current source having an offset potential of at least three hundred volts, the current source having an output electrode; and a capacitor having a first electrode electrically connected to the output electrode of the current source and having a second electrode electrically connected to the second electrode of the current measuring device. 4 figs.

  18. Measuring Arithmetic Intensity

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Home » For Users » Application Performance » Measuring Arithmetic Intensity Measuring Arithmetic Intensity Arithmetic intensity is a measure of floating-point operations (FLOPs) performed by a given code (or code section) relative to the amount of memory accesses (Bytes) that are required to support those operations. It is most often defined as a FLOP per Byte ratio (F/B). This application note provides a methodology for determining arithmetic intensity using Intel's Software Development

  19. ARM - Measurement - Total carbon

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    carbon ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Measurement : Total carbon The total concentration of carbon in all its organic and non-organic forms. Categories Aerosols, Atmospheric Carbon Instruments The above measurement is considered scientifically relevant for the following instruments. Refer to the datastream (netcdf) file headers of each instrument for a list of all available measurements, including

  20. ARM - Measurement - Cloud location

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    point in space and time, typically expressed as a binary cloud mask. Categories Cloud Properties Instruments The above measurement is considered scientifically relevant for the...

  1. ARM - Measurement - Ice nuclei

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    : Ice nuclei Small particles around which ice particles form. Categories Cloud Properties Instruments The above measurement is considered scientifically relevant for the...

  2. ARM - Measurement - Hydrometeor types

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    into such microphysical classes as rain, snow, graupel, and hail. Categories Cloud Properties Instruments The above measurement is considered scientifically relevant for the...

  3. ARM - Measurement - Hydrometeor phase

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    : Hydrometeor phase Hydrometeor phase such as liquid ice or mixed phase Categories Cloud Properties Instruments The above measurement is considered scientifically relevant for the...

  4. ARM - Measurement - Cloud phase

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    that involves property descriptors such as stratus, cumulus, and cirrus. Categories Cloud Properties Instruments The above measurement is considered scientifically relevant for the...

  5. ARM - Measurement - Hydrometeor image

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    from which one can derive characteristics such as size and shape. Categories Cloud Properties Instruments The above measurement is considered scientifically relevant for the...

  6. ARM - Measurement - Radar reflectivity

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    upon the size, shape, aspect, and dielectric properties of that target. Categories Cloud Properties Instruments The above measurement is considered scientifically relevant for the...

  7. Guidelines for Performance Measurement

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1996-06-30

    Federal agencies, states, businesses, and foreign governments are increasingly relying on performance measurement information to help chart progress in increasingly frugal times. No cancellations.

  8. ARM - Measurement - Soil moisture

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    : Soil Measurement from the SGP SWATS : Soil Water and Temperature System SEBS : Surface Energy Balance System External Instruments ECMWFDIAG : European Centre for Medium Range...

  9. Measuring axial pump thrust

    DOE Patents [OSTI]

    Suchoza, B.P.; Becse, I.

    1988-11-08

    An apparatus for measuring the hydraulic axial thrust of a pump under operation conditions is disclosed. The axial thrust is determined by forcing the rotating impeller off of an associated thrust bearing by use of an elongate rod extending coaxially with the pump shaft. The elongate rod contacts an impeller retainer bolt where a bearing is provided. Suitable measuring devices measure when the rod moves to force the impeller off of the associated thrust bearing and the axial force exerted on the rod at that time. The elongate rod is preferably provided in a housing with a heat dissipation mechanism whereby the hot fluid does not affect the measuring devices. 1 fig.

  10. Aerial Measuring System

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1991-09-20

    To establish policy for the Department of Energy's (DOE) Aerial Measuring System (AMS) Program. This directive does not cancel another directive. Canceled by DOE O 153.1.

  11. Arctic Climate Measurements

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Climate Measurements - Sandia Energy Energy Search Icon Sandia Home Locations Contact Us Employee Locator Energy & Climate Secure & Sustainable Energy Future Stationary Power ...

  12. Measuring axial pump thrust

    DOE Patents [OSTI]

    Suchoza, Bernard P.; Becse, Imre

    1988-01-01

    An apparatus for measuring the hydraulic axial thrust of a pump under operation conditions is disclosed. The axial thrust is determined by forcing the rotating impeller off of an associated thrust bearing by use of an elongate rod extending coaxially with the pump shaft. The elongate rod contacts an impeller retainer bolt where a bearing is provided. Suitable measuring devices measure when the rod moves to force the impeller off of the associated thrust bearing and the axial force exerted on the rod at that time. The elongate rod is preferably provided in a housing with a heat dissipation mechanism whereby the hot fluid does not affect the measuring devices.

  13. Sandia Motion Measurement Processor

    Energy Science and Technology Software Center (OSTI)

    2003-03-01

    SANDIA-MMP is used to estimate the motion of the belly and wing pods of an aircraft given various indirect in-flight measurements.

  14. ARM - Measurements and Platforms

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    for ISDAC (pdf, 525K) ISDAC Flight Planning Document (PDF, 216K) Collaborations Logistics Measurements & Platforms Contacts News News & Press Fact Sheets Images ARM flickr...

  15. ARM - Measurement - Surface albedo

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    instrument for a list of all available measurements, including those recorded for diagnostic or quality assurance purposes. ARM Instruments MFR : Multifilter Radiometer MFRSR :...

  16. Oscillatory motion based measurement method and sensor for measuring wall shear stress due to fluid flow

    DOE Patents [OSTI]

    Armstrong, William D.; Naughton, Jonathan; Lindberg, William R.

    2008-09-02

    A shear stress sensor for measuring fluid wall shear stress on a test surface is provided. The wall shear stress sensor is comprised of an active sensing surface and a sensor body. An elastic mechanism mounted between the active sensing surface and the sensor body allows movement between the active sensing surface and the sensor body. A driving mechanism forces the shear stress sensor to oscillate. A measuring mechanism measures displacement of the active sensing surface relative to the sensor body. The sensor may be operated under periodic excitation where changes in the nature of the fluid properties or the fluid flow over the sensor measurably changes the amplitude or phase of the motion of the active sensing surface, or changes the force and power required from a control system in order to maintain constant motion. The device may be operated under non-periodic excitation where changes in the nature of the fluid properties or the fluid flow over the sensor change the transient motion of the active sensor surface or change the force and power required from a control system to maintain a specified transient motion of the active sensor surface.

  17. Viscosity measuring using microcantilevers

    DOE Patents [OSTI]

    Oden, Patrick Ian

    2001-01-01

    A method for the measurement of the viscosity of a fluid uses a micromachined cantilever mounted on a moveable base. As the base is rastered while in contact with the fluid, the deflection of the cantilever is measured and the viscosity determined by comparison with standards.

  18. Metrology Measurement Capabilities

    SciTech Connect (OSTI)

    Dr. Glen E. Gronniger

    2007-10-02

    This document contains descriptions of Federal Manufacturing & Technologies (FM&T) Metrology capabilities, traceability flow charts, and the measurement uncertainty of each measurement capability. Metrology provides NIST traceable precision measurements or equipment calibration for a wide variety of parameters, ranges, and state-of-the-art uncertainties. Metrology laboratories conform to the requirements of the Department of Energy Development and Production Manual Chapter 13.2, ANSI/ISO/IEC ANSI/ISO/IEC 17025:2005, and ANSI/NCSL Z540-1. FM&T Metrology laboratories are accredited by NVLAP for the parameters, ranges, and uncertainties listed in the specific scope of accreditation under NVLAP Lab code 200108-0. See the Internet at http://ts.nist.gov/Standards/scopes/2001080.pdf. These parameters are summarized. The Honeywell Federal Manufacturing & Technologies (FM&T) Metrology Department has developed measurement technology and calibration capability in four major fields of measurement: (1) Mechanical; (2) Environmental, Gas, Liquid; (3) Electrical (DC, AC, RF/Microwave); and (4) Optical and Radiation. Metrology Engineering provides the expertise to develop measurement capabilities for virtually any type of measurement in the fields listed above. A strong audit function has been developed to provide a means to evaluate the calibration programs of our suppliers and internal calibration organizations. Evaluation includes measurement audits and technical surveys.

  19. Measurement of the NIF Gunite Shielding Composition and Implications for

    Office of Scientific and Technical Information (OSTI)

    Neutron Activation and Worker Doses (Conference) | SciTech Connect Measurement of the NIF Gunite Shielding Composition and Implications for Neutron Activation and Worker Doses Citation Details In-Document Search Title: Measurement of the NIF Gunite Shielding Composition and Implications for Neutron Activation and Worker Doses In December 1999 and January 2000, a 40-cm-thick spherical shell of sprayable concrete (''gunite'') was applied to the exterior surface of the National Ignition

  20. Evaluation, Measurement, and Verification of Energy Data | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Evaluation, Measurement, and Verification of Energy Data Evaluation, Measurement, and Verification of Energy Data Evaluation, measurement, and verification (EM&V) is the collection of methods and processes used to assess the performance of energy efficiency activities so planned results can be achieved with greater certainty and future activities can be more effective. The main objectives of an EM&V process are to assess the performance of an energy efficiency program or

  1. Intermediate Energy Infobook Activities (29 Activities)

    K-12 Energy Lesson Plans and Activities Web site (EERE)

    Information about Intermediate Energy Infobook, 29 student activities on energy basics for grades 5-8.

  2. Performance testing accountability measurements

    SciTech Connect (OSTI)

    Oldham, R.D.; Mitchell, W.G.; Spaletto, M.I.

    1993-12-31

    The New Brunswick Laboratory (NBL) provides assessment support to the DOE Operations Offices in the area of Material Control and Accountability (MC and A). During surveys of facilities, the Operations Offices have begun to request from NBL either assistance in providing materials for performance testing of accountability measurements or both materials and personnel to do performance testing. To meet these needs, NBL has developed measurement and measurement control performance test procedures and materials. The present NBL repertoire of performance tests include the following: (1) mass measurement performance testing procedures using calibrated and traceable test weights, (2) uranium elemental concentration (assay) measurement performance tests which use ampulated solutions of normal uranyl nitrate containing approximately 7 milligrams of uranium per gram of solution, and (3) uranium isotopic measurement performance tests which use ampulated uranyl nitrate solutions with enrichments ranging from 4% to 90% U-235. The preparation, characterization, and packaging of the uranium isotopic and assay performance test materials were done in cooperation with the NBL Safeguards Measurements Evaluation Program since these materials can be used for both purposes.

  3. CIRCUITS FOR CURRENT MEASUREMENTS

    DOE Patents [OSTI]

    Cox, R.J.

    1958-11-01

    Circuits are presented for measurement of a logarithmic scale of current flowing in a high impedance. In one form of the invention the disclosed circuit is in combination with an ionization chamber to measure lonization current. The particular circuit arrangement lncludes a vacuum tube having at least one grid, an ionization chamber connected in series with a high voltage source and the grid of the vacuum tube, and a d-c amplifier feedback circuit. As the ionization chamber current passes between the grid and cathode of the tube, the feedback circuit acts to stabilize the anode current, and the feedback voltage is a measure of the logaritbm of the ionization current.

  4. Impact of Measurement Error on Synchrophasor Applications

    SciTech Connect (OSTI)

    Liu, Yilu; Gracia, Jose R.; Ewing, Paul D.; Zhao, Jiecheng; Tan, Jin; Wu, Ling; Zhan, Lingwei

    2015-07-01

    Phasor measurement units (PMUs), a type of synchrophasor, are powerful diagnostic tools that can help avert catastrophic failures in the power grid. Because of this, PMU measurement errors are particularly worrisome. This report examines the internal and external factors contributing to PMU phase angle and frequency measurement errors and gives a reasonable explanation for them. It also analyzes the impact of those measurement errors on several synchrophasor applications: event location detection, oscillation detection, islanding detection, and dynamic line rating. The primary finding is that dynamic line rating is more likely to be influenced by measurement error. Other findings include the possibility of reporting nonoscillatory activity as an oscillation as the result of error, failing to detect oscillations submerged by error, and the unlikely impact of error on event location and islanding detection.

  5. CRAD, Measuring and Testing Equipment Assessment Plan

    Broader source: Energy.gov [DOE]

    The objective of this assessment is to determine whether a program is in place which assures that Measuring and Test Equipment (M&TE) used in activities affecting quality and safety are properly controlled, calibrated, and adjusted at specified times to maintain accuracy within necessary limits.

  6. Microsoft Word - EOC Activation - Pipeline Overpressurization...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Center (EOC) has been activated as a precautionary measure after an over-pressurized pipeline vented about 100 gallons of liquid natural gas approximately two miles from the WIPP...

  7. Measuring Strong Nanostructures

    ScienceCinema (OSTI)

    Andy Minor

    2010-01-08

    Andy Minor of Berkeley Lab's National Center for Electron Microscopy explains measuring stress and strain on nanostructures with the In Situ Microscope. More information: http://newscenter.lbl.gov/press-relea...

  8. ARM - Measurement - Hydrometeor Geometry

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Geometry ARM Data Discovery Browse Data Comments? We would love to hear from you Send us a note below or call us at 1-888-ARM-DATA. Send Measurement : Hydrometeor Geometry...

  9. ARM - Measurement - Backscattered radiation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Send us a note below or call us at 1-888-ARM-DATA. Send Measurement : Backscattered radiation The scattering of radiant energy into the hemisphere of space bounded by a plane ...

  10. ARM - Measurement - Cloud extinction

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Send us a note below or call us at 1-888-ARM-DATA. Send Measurement : Cloud extinction The removal of radiant energy from an incident beam by the process of cloud absorption andor ...

  11. ARM - Measurement - Aerosol extinction

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Send us a note below or call us at 1-888-ARM-DATA. Send Measurement : Aerosol extinction The removal of radiant energy from an incident beam by the process of aerosol absorption ...

  12. ARM - Measurement - Aerosol absorption

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    absorption ARM Data Discovery Browse Data Comments? We would love to hear from you Send us a note below or call us at 1-888-ARM-DATA. Send Measurement : Aerosol absorption The...

  13. ARM - Measurement - Methane flux

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    hear from you Send us a note below or call us at 1-888-ARM-DATA. Send Measurement : Methane flux Vertical flux of methane near the surface due to turbulent transport. Categories...

  14. ARM - Measurement - Methane concentration

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    hear from you Send us a note below or call us at 1-888-ARM-DATA. Send Measurement : Methane concentration The amount of methane, a greenhouse gas, per unit of volume. Categories...

  15. ARM - Measurement - Advective tendency

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    would love to hear from you Send us a note below or call us at 1-888-ARM-DATA. Send Measurement : Advective tendency The large-scale advective tendency of temperature and moisture...

  16. ARM - Measurement - Isotope ratio

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    would love to hear from you Send us a note below or call us at 1-888-ARM-DATA. Send Measurement : Isotope ratio Ratio of stable isotope concentrations. Categories Atmospheric...

  17. ARM - Measurement - Convection

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    would love to hear from you Send us a note below or call us at 1-888-ARM-DATA. Send Measurement : Convection Vertical motion within the atmosphere due to thermal instability, with...

  18. ARM - Measurement - Virtual temperature

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    would love to hear from you Send us a note below or call us at 1-888-ARM-DATA. Send Measurement : Virtual temperature The virtual temperature Tv T(1 + rvepsilon), where rv is...

  19. ARM - Measurement - Actinic flux

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    would love to hear from you Send us a note below or call us at 1-888-ARM-DATA. Send Measurement : Actinic flux The quantity of light in the atmosphere available to molecules at a...

  20. ARM - Measurement - Aerosol image

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    would love to hear from you Send us a note below or call us at 1-888-ARM-DATA. Send Measurement : Aerosol image Images of aerosols from which one can derive characteristics such...

  1. In situ measurement system

    DOE Patents [OSTI]

    Lord, D.E.

    1980-11-24

    A multipurpose in situ underground measurement system comprising a plurality of long electrical resistance elements in the form of rigid reinforcing bars, each having an open loop hairpin configuration of shorter length than the other resistance elements. The resistance elements are arranged in pairs in a unitized structure, and grouted in place in the underground volume. Measurement means are provided for obtaining for each pair the electrical resistance of each element and the difference in electrical resistance of the paired elements, which difference values may be used in analytical methods involving resistance as a function of temperature. A scanner means sequentially connects the resistance-measuring apparatus to each individual pair of elements. A source of heating current is also selectively connectable for heating the elements to an initial predetermined temperature prior to electrical resistance measurements when used as an anemometer.

  2. Capacitance measuring device

    DOE Patents [OSTI]

    Andrews, W.H. Jr.

    1984-08-01

    A capacitance measuring circuit is provided in which an unknown capacitance is measured by comparing the charge stored in the unknown capacitor with that stored in a known capacitance. Equal and opposite voltages are repetitively simultaneously switched onto the capacitors through an electronic switch driven by a pulse generator to charge the capacitors during the ''on'' portion of the cycle. The stored charge is compared by summing discharge currents flowing through matched resistors at the input of a current sensor during the ''off'' portion of the switching cycle. The net current measured is thus proportional to the difference in value of the two capacitances. The circuit is capable of providing much needed accuracy and stability to a great variety of capacitance-based measurement devices at a relatively low cost.

  3. ARM - Measurement - Precipitable water

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    water ARM Data Discovery Browse Data Comments? We would love to hear from you Send us a note below or call us at 1-888-ARM-DATA. Send Measurement : Precipitable water Total amount ...

  4. Electron Heat Transport Measured

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Heat Transport Measured in a Stochastic Magnetic Field T. M. Biewer, * C. B. Forest, ... limit of s &29; 1, RR assumed the electron heat flux to be diffusive, obeying Fourier's ...

  5. ARM - Measurement - Horizontal wind

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    wind ARM Data Discovery Browse Data Comments? We would love to hear from you Send us a note below or call us at 1-888-ARM-DATA. Send Measurement : Horizontal wind The horizontal ...

  6. Pulse flux measuring device

    DOE Patents [OSTI]

    Riggan, William C.

    1985-01-01

    A device for measuring particle flux comprises first and second photodiode detectors for receiving flux from a source and first and second outputs for producing first and second signals representing the flux incident to the detectors. The device is capable of reducing the first output signal by a portion of the second output signal, thereby enhancing the accuracy of the device. Devices in accordance with the invention may measure distinct components of flux from a single source or fluxes from several sources.

  7. Measurement of the absolute \

    SciTech Connect (OSTI)

    Aunion, Jose Luis Alcaraz; /Barcelona, IFAE

    2010-07-01

    This thesis presents the measurement of the charged current quasi-elastic (CCQE) neutrino-nucleon cross section at neutrino energies around 1 GeV. This measurement has two main physical motivations. On one hand, the neutrino-nucleon interactions at few GeV is a region where existing old data are sparse and with low statistics. The current measurement populates low energy regions with higher statistics and precision than previous experiments. On the other hand, the CCQE interaction is the most useful interaction in neutrino oscillation experiments. The CCQE channel is used to measure the initial and final neutrino fluxes in order to determine the neutrino fraction that disappeared. The neutrino oscillation experiments work at low neutrino energies, so precise measurement of CCQE interactions are essential for flux measurements. The main goal of this thesis is to measure the CCQE absolute neutrino cross section from the SciBooNE data. The SciBar Booster Neutrino Experiment (SciBooNE) is a neutrino and anti-neutrino scattering off experiment. The neutrino energy spectrum works at energies around 1 GeV. SciBooNE was running from June 8th 2007 to August 18th 2008. In that period, the experiment collected a total of 2.65 x 10{sup 20} protons on target (POT). This thesis has used full data collection in neutrino mode 0.99 x 10{sup 20} POT. A CCQE selection cut has been performed, achieving around 70% pure CCQE sample. A fit method has been exclusively developed to determine the absolute CCQE cross section, presenting results in a neutrino energy range from 0.2 to 2 GeV. The results are compatible with the NEUT predictions. The SciBooNE measurement has been compared with both Carbon (MiniBoonE) and deuterium (ANL and BNL) target experiments, showing a good agreement in both cases.

  8. Performance Measurement Analysis System

    Energy Science and Technology Software Center (OSTI)

    1989-06-01

    The PMAS4.0 (Performance Measurement Analysis System) is a user-oriented system designed to track the cost and schedule performance of Department of Energy (DOE) major projects (MPs) and major system acquisitions (MSAs) reporting under DOE Order 5700.4A, Project Management System. PMAS4.0 provides for the analysis of performance measurement data produced from management control systems complying with the Federal Government''s Cost and Schedule Control Systems Criteria.

  9. Device for calorimetric measurement

    DOE Patents [OSTI]

    King, William P; Lee, Jungchul

    2015-01-13

    In one aspect, provided herein is a single crystal silicon microcalorimeter, for example useful for high temperature operation and long-term stability of calorimetric measurements. Microcalorimeters described herein include microcalorimeter embodiments having a suspended structure and comprising single crystal silicon. Also provided herein are methods for making calorimetric measurements, for example, on small quantities of materials or for determining the energy content of combustible material having an unknown composition.

  10. Ultrasonic differential measurement

    DOE Patents [OSTI]

    Rhodes, George W.; Migliori, Albert

    1995-01-01

    A method and apparatus for ultrasonic resonance testing of an object is shown and described. Acoustic vibrations are applied to an object at a plurality of frequencies. Measurements of the object's vibrational response are made simultaneously at different locations on said object. The input frequency is stepped by using small frequency changes over a predetermined range. There is a pause interval or ring delay which permits the object to reach a steady state resonance before a measurement is taken.

  11. Solution mass measurement

    SciTech Connect (OSTI)

    Ford, W.; Marshall, R.S.; Osborn, L.C.; Picard, R.; Thomas, C.C. Jr.

    1982-07-01

    This report describes the efforts to develop and demonstrate a solution mass measurement system for use at the Los Alamos Plutonium Facility. Because of inaccuracy of load cell measurements, our major effort was directed towards the pneumatic bubbler tube. The differential pressure between the air inlet to the bubbler tube and the glovebox interior is measured and is proportional to the solution mass in the tank. An inexpensive, reliable pressure transducer system for measuring solution mass in vertical, cylindrical tanks was developed, tested, and evaluated in a laboratory test bed. The system can withstand the over- and underpressures resulting from solution transfer operations and can prevent solution backup into the measurement pressure transducer during transfers. Drifts, noise, quantization error, and other effects limit the accuracy to 30 g. A transportable calibration system using a precision machined tank, pneumatic bubbler tubes, and a Ruska DDR 6000 electromanometer was designed, fabricated, tested, and evaluated. Resolution of the system is +-3.5 g out of 50 kg. The calibration error is 5 g, using room-temperature water as the calibrating fluid. Future efforts will be directed towards in-plant test and evaluation of the tank measurement systems. 16 figures, 3 tables.

  12. NEUTRON MEASURING METHOD AND APPARATUS

    DOE Patents [OSTI]

    Seaborg, G.T.; Friedlander, G.; Gofman, J.W.

    1958-07-29

    A fast neutron fission detecting apparatus is described consisting of a source of fast neutrons, an ion chamber containing air, two electrodes within the ion chamber in confronting spaced relationship, a high voltage potential placed across the electrodes, a shield placed about the source, and a suitable pulse annplifier and recording system in the electrode circuit to record the impulse due to fissions in a sannple material. The sample material is coated onto the active surface of the disc electrode and shielding means of a material having high neutron capture capabilities for thermal neutrons are provided in the vicinity of the electrodes and about the ion chamber so as to absorb slow neutrons of thermal energy to effectively prevent their diffusing back to the sample and causing an error in the measurement of fast neutron fissions.

  13. Radon measurements at the FEMP

    SciTech Connect (OSTI)

    Tomczak, L.M.; Daniels, R.D.; Dennis, C.; Glassey, H.G.; Lohner, W.G.; Ray, E.C.; Selasky, J.A.; Spitz, H.B.; Roush, K.

    1993-08-01

    Environmental radon monitoring activities at the DOE Fernald Environmental Management Project (FEMP) have been conducted extensively since the early 1980`s. Monitoring has been conducted at ambient concentration levels (< 1 pCi/L Rn-222), inside buildings, and at significantly elevated levels (hundreds of thousands pCi/L Rn-222) within the K-65 silo that store concentrated radium bearing wastes. The purpose of this paper/presentation is to present and discuss some of the difficulties encountered/solutions (e.g. reliability, detection limits, affects of environmental factors, data transfer, etc.) that have been discovered while taking measurements using both alpha track-etch passive integrating detectors and alpha scintillation real-time detectors. A short summary and conclusion section is provided following each topic presented.

  14. ACTIV87: Fast Neutron Activation Cross Section File

    Energy Science and Technology Software Center (OSTI)

    1993-08-01

    4. HISTORICAL BACKGROUND AND INFORMATION ACTIV87 is a compilation of fast neutron induced activation reaction cross-sections. The compilation covers energies from threshold to 20 MeV and is based on evaluated data taken from other evaluated data libraries and individual evaluations. The majority of these evaluations were performed by using available experimental data. The aforementioned available experimental data were used in the selection of needed parameters for theoretical computations and for normalizing the results of suchmore » computations. Theoretical calculations were also used for interpolation and extrapolation of experimental cross-section data. All of the evaluated data curves were compared with experimental data that had been reported over the four year period preceding 1987. Only those cross-sections not in contradiction with experimental data that was current in 1987 were retained in the activation file, ACTIV87. In cases of several conflicting evaluations, that evaluation was chosen which best corresponded to the experimental data. A few evaluated curves were renormalized in accordance with the results of the latest precision measurements. 5. APPLICATION OF THE DATA 6. SOURCE AND SCOPE OF DATA The following libraries and individual files of evaluated neutron cross-section data were used for the selection of the activation cross-sections: the BOSPOR Library, the Activation File of the Evaluated Nuclear Data Library, the Evaluated Neutron Data File (ENDF/B-V) Activation File, the International Reactor Dosimetry File (IRDF-82), and individual evaluations carried out under various IAEA research contracts. The file of selected reactions contains 206 evaluated cross-section curves of the (n,2n), (n,p) and (n,a) reactions which lead to radioactive products and may be used in many practical applications of neutron activation analysis. Some competing activation reactions, usually with low cross-section values, are given for completeness.« less

  15. Electrochemical thermodynamic measurement system

    DOE Patents [OSTI]

    Reynier, Yvan; Yazami, Rachid; Fultz, Brent T.

    2009-09-29

    The present invention provides systems and methods for accurately characterizing thermodynamic and materials properties of electrodes and electrochemical energy storage and conversion systems. Systems and methods of the present invention are configured for simultaneously collecting a suite of measurements characterizing a plurality of interconnected electrochemical and thermodynamic parameters relating to the electrode reaction state of advancement, voltage and temperature. Enhanced sensitivity provided by the present methods and systems combined with measurement conditions that reflect thermodynamically stabilized electrode conditions allow very accurate measurement of thermodynamic parameters, including state functions such as the Gibbs free energy, enthalpy and entropy of electrode/electrochemical cell reactions, that enable prediction of important performance attributes of electrode materials and electrochemical systems, such as the energy, power density, current rate and the cycle life of an electrochemical cell.

  16. Measurement uncertainty relations

    SciTech Connect (OSTI)

    Busch, Paul; Lahti, Pekka; Werner, Reinhard F.

    2014-04-15

    Measurement uncertainty relations are quantitative bounds on the errors in an approximate joint measurement of two observables. They can be seen as a generalization of the error/disturbance tradeoff first discussed heuristically by Heisenberg. Here we prove such relations for the case of two canonically conjugate observables like position and momentum, and establish a close connection with the more familiar preparation uncertainty relations constraining the sharpness of the distributions of the two observables in the same state. Both sets of relations are generalized to means of order ? rather than the usual quadratic means, and we show that the optimal constants are the same for preparation and for measurement uncertainty. The constants are determined numerically and compared with some bounds in the literature. In both cases, the near-saturation of the inequalities entails that the state (resp. observable) is uniformly close to a minimizing one.

  17. Structural power flow measurement

    SciTech Connect (OSTI)

    Falter, K.J.; Keltie, R.F.

    1988-12-01

    Previous investigations of structural power flow through beam-like structures resulted in some unexplained anomalies in the calculated data. In order to develop structural power flow measurement as a viable technique for machine tool design, the causes of these anomalies needed to be found. Once found, techniques for eliminating the errors could be developed. Error sources were found in the experimental apparatus itself as well as in the instrumentation. Although flexural waves are the carriers of power in the experimental apparatus, at some frequencies longitudinal waves were excited which were picked up by the accelerometers and altered power measurements. Errors were found in the phase and gain response of the sensors and amplifiers used for measurement. A transfer function correction technique was employed to compensate for these instrumentation errors.

  18. Thermal Properties Measurement Report

    SciTech Connect (OSTI)

    Carmack, Jon; Braase, Lori; Papesch, Cynthia; Hurley, David; Tonks, Michael; Zhang, Yongfeng; Gofryk, Krzysztof; Harp, Jason; Fielding, Randy; Knight, Collin; Meyer, Mitch

    2015-08-01

    The Thermal Properties Measurement Report summarizes the research, development, installation, and initial use of significant experimental thermal property characterization capabilities at the INL in FY 2015. These new capabilities were used to characterize a U3Si2 (candidate Accident Tolerant) fuel sample fabricated at the INL. The ability to perform measurements at various length scales is important and provides additional data that is not currently in the literature. However, the real value of the data will be in accomplishing a phenomenological understanding of the thermal conductivity in fuels and the ties to predictive modeling. Thus, the MARMOT advanced modeling and simulation capability was utilized to illustrate how the microstructural data can be modeled and compared with bulk characterization data. A scientific method was established for thermal property measurement capability on irradiated nuclear fuel samples, which will be installed in the Irradiated Material Characterization Laboratory (IMCL).

  19. Metrology Measurement Capabilities

    SciTech Connect (OSTI)

    Barnes, L.M.

    2003-11-12

    This document contains descriptions of Federal Manufacturing & Technologies (FM&T) Metrology capabilities, traceability flow charts, and the measurement uncertainty of each measurement capability. Metrology provides NIST traceable precision measurements or equipment calibration for a wide variety of parameters, ranges, and state-of-the-art uncertainties. Metrology laboratories conform to the requirements of the Department of Energy Development and Production Manual Chapter 8.4, ANSI/ISO/IEC ANSI/ISO/IEC 17025:2000, and ANSI/NCSL Z540-1 (equivalent to ISO Guide 25). FM&T Metrology laboratories are accredited by NVLAP for the parameters, ranges, and uncertainties listed in the specific scope of accreditation under NVLAP Lab code 200108-0. See the Internet at http://ts.nist.gov/ts/htdocs/210/214/scopes/2001080.pdf. These parameters are summarized in the table at the bottom of this introduction.

  20. Downhole steam quality measurement

    DOE Patents [OSTI]

    Lee, D.O.; Montoya, P.C.; Muir, J.F.; Wayland, J.R. Jr.

    1985-06-19

    The present invention relates to an empirical electrical method for remote sensing of steam quality utilizing flow-through grids which allow measurement of the electrical properties of a flowing two-phase mixture. The measurement of steam quality in the oil field is important to the efficient application of steam assisted recovery of oil. Because of the increased energy content in higher quality steam it is important to maintain the highest possible steam quality at the injection sandface. The effectiveness of a steaming operation without a measure of steam quality downhole close to the point of injection would be difficult to determine. Therefore, a need exists for the remote sensing of steam quality.

  1. Secondary Energy Infobook Activities (19 Activities)

    K-12 Energy Lesson Plans and Activities Web site (EERE)

    Information about Secondary Energy Infobook, 19 student activities on energy basics for grades 5-8 and 9-12.

  2. Measuring environmental performance

    SciTech Connect (OSTI)

    Weireter, R.

    1995-12-01

    Environmental management has become increasingly complex as regulatory and social forces transform traditional business practices. In recent years, due to the growing importance and cost of environmental management, emphasis has shifted away from regulatory compliance toward the broader areas of strategic environment management and total quality environmental management. This shift in emphasis has sought to incorporate environmental management throughout the entire company, rather than confine it to the {open_quotes}environmental department.{close_quotes} This shift has produced a need to measure environmental performance so that business managers can make more informed decisions regarding appropriate management strategies. Identifying appropriate measurement indicators and incorporating this goal into traditional company management information systems has become a key challenge for many environmental professionals. The objective of the presentation will be to discuss tools which can be used to measure a company`s environmental performance, and how these tools can help managers promote more cost-effective environmental management. The presentation will contain a general overview of the issues involved in establishing an environmental performance measurement system. Topics to be addressed include environmental management information systems, developing effective environmental programs, benchmarking your current status against which to evaluate future performance, and striving for continuous environmental improvement.

  3. Measure Guideline: Evaporative Condensers

    SciTech Connect (OSTI)

    German, A; Dakin, B.; Hoeschele, M.

    2012-03-01

    This measure guideline on evaporative condensers provides information on properly designing, installing, and maintaining evaporative condenser systems as well as understanding the benefits, costs, and tradeoffs. This is a prescriptive approach that outlines selection criteria, design and installation procedures, and operation and maintenance best practices.

  4. Measure Guideline: Ventilation Cooling

    SciTech Connect (OSTI)

    Springer, D.; Dakin, B.; German, A.

    2012-04-01

    The purpose of this measure guideline is to provide information on a cost-effective solution for reducing cooling system energy and demand in homes located in hot-dry and cold-dry climates. This guideline provides a prescriptive approach that outlines qualification criteria, selection considerations, and design and installation procedures.

  5. Measure Guideline: Ventilation Cooling

    SciTech Connect (OSTI)

    Springer, D.; Dakin, B.; German, A.

    2012-04-01

    The purpose of this measure guideline on ventilation cooling is to provide information on a cost-effective solution for reducing cooling system energy and demand in homes located in hot-dry and cold-dry climates. This guideline provides a prescriptive approach that outlines qualification criteria, selection considerations, and design and installation procedures.

  6. Measurements and material accounting

    SciTech Connect (OSTI)

    Hammond, G.A. )

    1989-11-01

    The DOE role for the NBL in safeguarding nuclear material into the 21st century is discussed. Development of measurement technology and reference materials supporting requirements of SDI, SIS, AVLIS, pyrochemical reprocessing, fusion, waste storage, plant modernization program, and improved tritium accounting are some of the suggested examples.

  7. Underwater measuring gage

    DOE Patents [OSTI]

    Lockhart, James L.

    1989-01-01

    A device for remotely measuring the diameter of wire rope. The device includes a linear variable differential tansducer, a mechanism to guide and clamp the rope in relation to the anvil of the transducer, an elongated handle for manually manipulating the transducer and the guide and clamp mechanism.

  8. Activity Based Costing

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1997-03-28

    Activity Based Costing (ABC) is method for developing cost estimates in which the project is subdivided into discrete, quantifiable activities or a work unit. This chapter outlines the Activity Based Costing method and discusses applicable uses of ABC.

  9. Neutron Spectrum Measurements from Irradiations at NCERC

    SciTech Connect (OSTI)

    Jackman, Kevin Richard; Mosby, Michelle A.; Bredeweg, Todd Allen; Hutchens, Gregory Joe; White, Morgan Curtis

    2015-04-15

    Several irradiations have been conducted on assemblies (COMET/ZEUS and Flattop) at the National Criticality Experiments Research Center (NCERC) located at the Nevada National Security Site (NNSS). Configurations of the assemblies and irradiated materials changed between experiments. Different metallic foils were analyzed using the radioactivation method by gamma-ray spectrometry to understand/characterize the neutron spectra. Results of MCNP calculations are shown. It was concluded that MCNP simulated spectra agree with experimental measurements, with the caveats that some data are limited by statistics at low-energies and some activation foils have low activities.

  10. High temperature measuring device

    DOE Patents [OSTI]

    Tokarz, Richard D.

    1983-01-01

    A temperature measuring device for very high design temperatures (to 2,000.degree. C.). The device comprises a homogenous base structure preferably in the form of a sphere or cylinder. The base structure contains a large number of individual walled cells. The base structure has a decreasing coefficient of elasticity within the temperature range being monitored. A predetermined quantity of inert gas is confined within each cell. The cells are dimensionally stable at the normal working temperature of the device. Increases in gaseous pressure within the cells will permanently deform the cell walls at temperatures within the high temperature range to be measured. Such deformation can be correlated to temperature by calibrating similarly constructed devices under known time and temperature conditions.

  11. Neutrino Interaction Measurements

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Making the First Neutrino Interaction Measurements on Argon at Low Energy with MicroBooNE Jason St. John University of Cincinnati 1 The µB Collaboration Brookhaven Lab Hucheng Chen Kai Chen (PD) Susan Duffin Jason Farell Francesco Lanni Yichen Li (PD) David Lissauer George Mahler Don Makowiecki Joseph Mead Veljko Radeka Sergio Rescia Andres Ruga Jack Sondericker Craig Thorn (IB) Bo Yu University of Chicago Will Foreman (GS) Johnny Ho (GS) David Schmitz (IB) University of Cincinnati Ryan Grosso

  12. Wake Imaging Measurement System

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Imaging Measurement System - Sandia Energy Energy Search Icon Sandia Home Locations Contact Us Employee Locator Energy & Climate Secure & Sustainable Energy Future Stationary Power Energy Conversion Efficiency Solar Energy Wind Energy Water Power Supercritical CO2 Geothermal Natural Gas Safety, Security & Resilience of the Energy Infrastructure Energy Storage Nuclear Power & Engineering Grid Modernization Battery Testing Nuclear Fuel Cycle Defense Waste Management Programs

  13. Optical absorption measurement system

    DOE Patents [OSTI]

    Draggoo, Vaughn G.; Morton, Richard G.; Sawicki, Richard H.; Bissinger, Horst D.

    1989-01-01

    The system of the present invention contemplates a non-intrusive method for measuring the temperature rise of optical elements under high laser power optical loading to determine the absorption coefficient. The method comprises irradiating the optical element with a high average power laser beam, viewing the optical element with an infrared camera to determine the temperature across the optical element and calculating the absorption of the optical element from the temperature.

  14. Motor Energy Conservation Measures

    Energy Science and Technology Software Center (OSTI)

    2010-12-31

    This software requires inputs of simple motor inventory information and calculates the energy and cost benefits of various retrofit opportunities. This tool includes energy conservation measures for: High Efficiency Motor retrofit and Cogged V-belts retrofit. This tool calculates energy savings, demand reduction, cost savings, and building life cycle costs including: simple payback, discounted payback, net-present value, and savings to investment ratio. In addition this tool also displays the environmental benefits of a project.

  15. Phasor Measurement Units

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Phasor Measurement Units - Sandia Energy Energy Search Icon Sandia Home Locations Contact Us Employee Locator Energy & Climate Secure & Sustainable Energy Future Stationary Power Energy Conversion Efficiency Solar Energy Wind Energy Water Power Supercritical CO2 Geothermal Natural Gas Safety, Security & Resilience of the Energy Infrastructure Energy Storage Nuclear Power & Engineering Grid Modernization Battery Testing Nuclear Fuel Cycle Defense Waste Management Programs Advanced

  16. Measure Guideline: Evaporative Condensers

    SciTech Connect (OSTI)

    German, A.; Dakin, B.; Hoeschele, M.

    2012-03-01

    The purpose of this measure guideline on evaporative condensers is to provide information on a cost-effective solution for energy and demand savings in homes with cooling loads. This is a prescriptive approach that outlines selection criteria, design and installation procedures, and operation and maintenance best practices. This document has been prepared to provide a process for properly designing, installing, and maintaining evaporative condenser systems as well as understanding the benefits, costs, and tradeoffs.

  17. Temperature measuring device

    DOE Patents [OSTI]

    Lauf, Robert J.; Bible, Don W.; Sohns, Carl W.

    1999-01-01

    Systems and methods are described for a wireless instrumented silicon wafer that can measure temperatures at various points and transmit those temperature readings to an external receiver. The device has particular utility in the processing of semiconductor wafers, where it can be used to map thermal uniformity on hot plates, cold plates, spin bowl chucks, etc. without the inconvenience of wires or the inevitable thermal perturbations attendant with them.

  18. Measuring Neutrino Interactions

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Measuring Neutrino Interactions with MiniBooNE R. Tayloe for the MiniBooNE collaboration Physics Department, Indiana University Bloomington, IN 47405, USA Abstract. The MiniBooNE neutrino oscillation experiment has collected a large sample of charged- and neutral-current neutrino interaction events. These samples are important to understand the normalization and backgrounds in neutrino oscillation searches. They also reveal insight into the structure of the nucleus and nucleon. The MiniBooNE

  19. Arctic Climate Measurements

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Climate Measurements - Sandia Energy Energy Search Icon Sandia Home Locations Contact Us Employee Locator Energy & Climate Secure & Sustainable Energy Future Stationary Power Energy Conversion Efficiency Solar Energy Wind Energy Water Power Supercritical CO2 Geothermal Natural Gas Safety, Security & Resilience of the Energy Infrastructure Energy Storage Nuclear Power & Engineering Grid Modernization Battery Testing Nuclear Fuel Cycle Defense Waste Management Programs Advanced

  20. AC Resistance measuring instrument

    DOE Patents [OSTI]

    Hof, Peter J.

    1983-01-01

    An auto-ranging AC resistance measuring instrument for remote measurement of the resistance of an electrical device or circuit connected to the instrument includes a signal generator which generates an AC excitation signal for application to a load, including the device and the transmission line, a monitoring circuit which provides a digitally encoded signal representing the voltage across the load, and a microprocessor which operates under program control to provide an auto-ranging function by which range resistance is connected in circuit with the load to limit the load voltage to an acceptable range for the instrument, and an auto-compensating function by which compensating capacitance is connected in shunt with the range resistance to compensate for the effects of line capacitance. After the auto-ranging and auto-compensation functions are complete, the microprocessor calculates the resistance of the load from the selected range resistance, the excitation signal, and the load voltage signal, and displays of the measured resistance on a digital display of the instrument.