Powered by Deep Web Technologies
Note: This page contains sample records for the topic "activity manufacturing agriculture" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Solar Thermal Manufacturing Activities  

Reports and Publications (EIA)

This report, Solar Thermal Collector Manufacturing Activities, providesan overview and tables with historical data spanning 2000-2009. These tables willcorrespond to similar tables to be presented in the Renewable Energy Annual 2009 andare numbered accordingly.

Michele Simmons

2010-12-01T23:59:59.000Z

2

Solar collector manufacturing activity 1993  

DOE Green Energy (OSTI)

The report presents national and State-level data on the U.S. solar thermal collector and photovoltaic cell and module manufacturing industry.

Not Available

1994-08-15T23:59:59.000Z

3

Solar collector manufacturing activity, 1992  

DOE Green Energy (OSTI)

This report presents data provided by US-based manufacturers and importers of solar collectors. Summary data on solar thermal collector shipments are presented for the years 1974 through 1992. Summary data on photovoltaic cell and module shipments are presented for the years 1982 through 1992. Detailed information for solar thermal collectors and photovoltaic cells and modules are presented for 1992. Appendix A describes the survey methodology. Appendix B contains the 1992 survey forms and instructions. Appendices C and D list the companies that responded to the 1992 surveys and granted permission for their names and addresses to appear in the report. Appendix E provides selected tables from this report with data shown in the International System of Units (SI) metric units. Appendix F provides an estimate of installed capacity and energy production from solar collectors for 1992.

Not Available

1993-11-09T23:59:59.000Z

4

MANUFACTURING  

Science Conference Proceedings (OSTI)

... Energy Efficiency in Buildings: Solid State Climate Control ... TE materials is green job creation, as Table ... can provide 21,454 US jobs in manufacturing ...

2011-08-01T23:59:59.000Z

5

Manufacturing  

Energy.gov (U.S. Department of Energy (DOE))

The U.S. Department of Energy funds the research, development, and demonstration of highly efficient and innovative manufacturing technologies. The Energy Department has supported the development...

6

Manufacturing  

NLE Websites -- All DOE Office Websites (Extended Search)

Manufacturing Manufacturing DUF6 Health Risks line line Accidents Storage Conversion Manufacturing Disposal Transportation Manufacturing of Products Containing Depleted Uranium Discussion of risks and possible impacts associated with fabrication of representative products containing depleted uranium. Beneficial Uses Risk Evaluation The Department has initiated the Depleted Uranium Uses Research and Development Program to explore the potential beneficial uses of the depleted uranium (DU), fluorine, and empty carbon steel DUF6 storage cylinders for effective use of resources and to achieve cost savings to the government. A number of tasks have been initiated related to uses of DU as a shielding material, catalyst, and as a semi-conductor material in electronic devices. An evaluation of the risks associated with the release

7

Solar-collector manufacturing activity, July through December, 1981  

DOE Green Energy (OSTI)

Solar thermal collector and solar cell manufacturing activity is both summarized and tabulated. Data are compared for three survey periods (July through December, 1981; January through June, 1981; and July through December, 1980). Annual totals are also provided for the years 1979 through 1981. Data include total producer shipments, end use, market sector, imports and exports. (LEW)

None

1982-03-01T23:59:59.000Z

8

Survey of US Department of Defense Manufacturing Technology Program activities applicable to civilian manufacturing industries. Final report  

Science Conference Proceedings (OSTI)

Intent of the survey was to identify and characterize activities potentially applicable to improving energy efficiency and overall productivity in the civilian manufacturing industries. The civilian industries emphasized were the general manufacturing industries (including fabricated metals, glass, machinery, paper, plastic, textile, and transportation equipment manufacturing) and the primary metals industries (including primary aluminum, copper, steel, and zinc production). The principal steps in the survey were to: develop overview taxonomies of the general manufacturing and primary metals industries as well as specific industry taxonomies; identify needs and opportunities for improving process energy efficiency and productivity in the industries included; identify federal programs, capabilities, and special technical expertise that might be relevant to industry's needs and opportunities; contact federal laboratories/facilities, through visits and other forms of inquiry; prepare formatted profiles (descriptions) potentially applicable work efforts; review findings with industry; and compile and evaluate industry responses.

Azimi, S.A.; Conrad, J.L.; Reed, J.E.

1985-03-01T23:59:59.000Z

9

Agriculture in an area impacted by past uranium mining activities  

SciTech Connect

The shallow aquifer near the old Cunha Baixa uranium mine (Viseu, Portugal) was contaminated by acid mine drainage. Concentration of radionuclides in water from irrigation wells and in the topsoil layer of the agriculture fields nearby display enhanced concentrations of uranium, radium and polonium. Two types of agriculture land in this area were selected, one with enhanced and another with low uranium concentrations, for controlled growth of lettuce and potatoes. Plants were grown in replicate portions of land (two plots) in each soil type and were periodically irrigated with water from wells. In each soil, one plot was irrigated with water containing low concentration of dissolved uranium and the other plot with water containing enhanced concentration of dissolved uranium. At the end of the growth season, plants were harvested and analysed, along with soil and irrigation water samples. Results show the accumulation of radionuclides in edible parts of plants, specially in the field plots with higher radionuclide concentrations in soil. Radionuclides in irrigation water contributed less to the radioactivity accumulated in plants than radionuclides from soils. (authors)

Carvalho, F. P.; Oliveira, J. M. [Instituto Tecnologico e Nuclear, Departamento de Proteccao Radiologica e Seguranca Nuclear, E.N. 10, 2686-953 Sacavem (Portugal); Neves, O.; Vicente, E. M. [Instituto Superior Tecnico Centro de Petrologia e Geoquimica, Universidade Tecnica de Lisboa, Av. Rovisco Pais 1049-001 Lisboa (Portugal); Abreu, M. M. [Dept Ciencias do Ambiente, Instituto Superior de Agronomia, Universidade Tecnica de Lisboa, Tapada da Ajuda 1399-017 Lisboa (Portugal)

2007-07-01T23:59:59.000Z

10

The NIST Manufacturing Extension Partnership: Improving the ...  

Science Conference Proceedings (OSTI)

... his Report on Manufactures, the United States was an agricultural economy ... In 1867, when agriculture was the mainstay of the US economy, federal ...

2010-10-05T23:59:59.000Z

11

Manufacturing Modeling and Simulation  

Science Conference Proceedings (OSTI)

... An integrated data model for manufacturing activities will be defined ... Measurement science techniques, including classic statistics, will be applied ...

2013-01-04T23:59:59.000Z

12

Energy Use in Manufacturing  

Reports and Publications (EIA)

This report addresses both manufacturing energy consumption and characteristics of the manufacturing economy related to energy consumption. In addition, special sections on fuel switching capacity and energy-management activities between 1998 and 2002 are also featured in this report.

William Gifford

2006-08-14T23:59:59.000Z

13

Department of Agricultural and Resource EconomicsDetermining the Impact of Retailer Store Brand Procurement on Vertical Relationships with Brand Manufacturers and on Market Equilibrium †  

E-Print Network (OSTI)

This paper investigates how a retailer’s store brand supply source impacts vertical pricing and supply channel profitability. Using chain-level retail scanner data from major supermarkets in Boston prior to the leading retailer’s divestiture of its store brand milk processing to a major brand manufacturer I estimate a random coefficients logit demand model employing a Bayesian estimation approach. Bayesian decision theory is applied to select from a set of pricing games the one most likely for the data sample analyzed. Results from this analysis indicate that the empirically valid model has the pre-divested retailer integrated into the processing of its own milk and takes as given the wholesale price of brand milks while competing retailers have nonlinear pricing contracts with brand manufacturers who produce their store brands. This model is matched against a series of counterfactual simulations as a baseline. The counterfactual simulations consider the eventual divestiture of store brand milk processing by the leading retailer

Michael A. Cohen; Michael A. Cohen

2010-01-01T23:59:59.000Z

14

A study of object naming according to the manufacturing processes in a cooking activity  

Science Conference Proceedings (OSTI)

Usually, an intermediate object that appears for a short time during a process of production, for instance "minced onion," does not have a common and specific name. In this paper, we study how people designate such an intermediate object using their ... Keywords: cooking, human-robot communication, intermediate object, manufacturing process, natural language understanding, object naming, object recognition, recipe

Yoko Yamakata; Takuya Funatomi; Koh Kakusho; Michihiko Minoh

2009-10-01T23:59:59.000Z

15

Review: The impact of agricultural activities on water quality: A case for collaborative catchment-scale management using integrated wireless sensor networks  

Science Conference Proceedings (OSTI)

The challenge of improving water quality is a growing global concern, typified by the European Commission Water Framework Directive and the United States Clean Water Act. The main drivers of poor water quality are economics, poor water management, agricultural ... Keywords: Agricultural activities, Catchment, Collaborative, Water quality monitoring and management, Wireless sensor networks

Huma Zia, Nick R. Harris, Geoff V. Merrett, Mark Rivers, Neil Coles

2013-08-01T23:59:59.000Z

16

A review of methods and applications of the geometric characterization of tree crops in agricultural activities  

Science Conference Proceedings (OSTI)

This paper presents the foundations and applications in agriculture of the main systems used for the geometrical characterization of tree plantations, including systems based on ultrasound, digital photographic techniques, light sensors, high-resolution ... Keywords: 3D plant modeling, LIDAR, Stereo vision, Terrestrial laser scanning, Ultrasonic sensors, Variable application

J. R. Rosell; R. Sanz

2012-02-01T23:59:59.000Z

17

Sustainable Agriculture Loan Program  

Energy.gov (U.S. Department of Energy (DOE))

The Minnesota Sustainable Agriculture Loan program will provide loans to Minnesota residents actively engaged in farming for capital expenditures which enhance the environmental and economic...

18

Three Essays on U.S. Agriculture under Climate Change: Active Engagement in Mitigation and Adaptation  

E-Print Network (OSTI)

This dissertation investigates: (1) the implications of including high-yielding energy sorghum under the Renewable Fuels Standard (RFS2) program; (2) the effects of RFS2 with and without projected climate change scenarios on U.S. agriculture; (3) the spatial distribution of cattle breeders in Texas to quantify how climate factors influence cattle breed selection. In the RFS2 energy sorghum work, the ability of the agriculture sector to meet the fuel requirements of RFS2 is examined with and without energy sorghum being a possibility using an agricultural sector model. The results show that energy sorghum would be a valuable contributor that would be used as a feedstock producing over 13 billion gallons per year of cellulosic ethanol. Without the presence of energy sorghum it is found that switchgrass serves as the major cellulosic ethanol feedstock. Findings also indicate that the presence of high-yielding energy sorghum does relax commodity prices and export reductions except for grain sorghum as energy sorghum competes with grain sorghum production. In addition, the results show that the introduction of energy sorghum has minimal effects on GHG mitigation potential in the agricultural sector. In the RFS2 and climate change research, the analysis shows that climate change eases the burden of meeting the RFS2 mandates increasing consumer welfare while decreasing producer welfare. The results also show that climate change encourages a more diversified use of biofuel feedstocks for cellulosic ethanol production, in particular crop residues. In the cattle breed research, summer heat stress is found to be a significant factor for breed selection: positive for Bos indicus and negative for Bos taurus and composite breeds. The estimation results also indicate a price-driven trade-off between Bos taurus and Bos indicus breeds.

Zhang, Yuquan

2011-12-01T23:59:59.000Z

19

Blade Manufacturing Improvement: Remote Blade Manufacturing Demonstration  

DOE Green Energy (OSTI)

The objective of this program was to investigate manufacturing improvements for wind turbine blades. The program included a series of test activities to evaluate the strength, deflection, performance, and loading characteristics of the prototype blades. The original contract was extended in order to continue development of several key blade technologies identified in the project. The objective of the remote build task was to demonstrate the concept of manufacturing wind turbine blades at a temporary manufacturing facility in a rural environment. TPI Composites successfully completed a remote manufacturing demonstration in which four blades were fabricated. The remote demonstration used a manufacturing approach which relied upon material ''kits'' that were organized in the factory and shipped to the site. Manufacturing blades at the wind plant site presents serious logistics difficulties and does not appear to be the best approach. A better method appears to be regional manufacturing facilities, which will eliminate most of the transportation cost, without incurring the logistical problems associated with fabrication directly onsite. With this approach the remote facilities would use commonly available industrial infrastructure such as enclosed workbays, overhead cranes, and paved staging areas. Additional fatigue testing of the M20 root stud design was completed with good results. This design provides adhesive bond strength under fatigue loading that exceeds that of the fastener. A new thru-stud bonding concept was developed for the M30 stud design. This approach offers several manufacturing advantages; however, the test results were inconclusive.

ASHWILL, THOMAS D.

2003-05-01T23:59:59.000Z

20

Blade Manufacturing Improvement: Remote Blade Manufacturing Demonstration  

SciTech Connect

The objective of this program was to investigate manufacturing improvements for wind turbine blades. The program included a series of test activities to evaluate the strength, deflection, performance, and loading characteristics of the prototype blades. The original contract was extended in order to continue development of several key blade technologies identified in the project. The objective of the remote build task was to demonstrate the concept of manufacturing wind turbine blades at a temporary manufacturing facility in a rural environment. TPI Composites successfully completed a remote manufacturing demonstration in which four blades were fabricated. The remote demonstration used a manufacturing approach which relied upon material ''kits'' that were organized in the factory and shipped to the site. Manufacturing blades at the wind plant site presents serious logistics difficulties and does not appear to be the best approach. A better method appears to be regional manufacturing facilities, which will eliminate most of the transportation cost, without incurring the logistical problems associated with fabrication directly onsite. With this approach the remote facilities would use commonly available industrial infrastructure such as enclosed workbays, overhead cranes, and paved staging areas. Additional fatigue testing of the M20 root stud design was completed with good results. This design provides adhesive bond strength under fatigue loading that exceeds that of the fastener. A new thru-stud bonding concept was developed for the M30 stud design. This approach offers several manufacturing advantages; however, the test results were inconclusive.

ASHWILL, THOMAS D.

2003-05-01T23:59:59.000Z

Note: This page contains sample records for the topic "activity manufacturing agriculture" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Application of activity-based costing in a manufacturing company: a comparison with traditional costing  

Science Conference Proceedings (OSTI)

Activity-Based Costing (ABC) represents an alternative paradigm to traditional cost accounting system and has received extensive attention during the past decade. Rather than distorting the cost information by using traditional overhead allocation methods, ...

Gonca Tuncel; Derya Eren Akyol; Gunhan Mirac Bayhan; Utku Koker

2005-05-01T23:59:59.000Z

22

About Manufacturing  

Science Conference Proceedings (OSTI)

... reflects the changes in prices that manufacturers ... Petroleum Electricity Natural Gas Coal Emissions ... Position Abroad on a Historical Cost Basis ...

2013-07-25T23:59:59.000Z

23

Manufacturing Portal  

Science Conference Proceedings (OSTI)

... datasets. Manufacturers of … more. In Situ Characterization of Nanoscale Gas-Solid Interactions by TEM Observing and ...

2013-09-09T23:59:59.000Z

24

Manufacturing News  

Science Conference Proceedings (OSTI)

... Two New MEP Centers Will Serve Kentucky and South Dakota Manufacturers Release Date: 01/24/2013 Small and mid ...

2010-09-22T23:59:59.000Z

25

Green Manufacturing Portal  

Science Conference Proceedings (OSTI)

NIST Home > Green Manufacturing Portal. Green Manufacturing Portal. ... see all Green Manufacturing programs and projects ... ...

2012-12-27T23:59:59.000Z

26

Green Manufacturing Events  

Science Conference Proceedings (OSTI)

NIST Home > Green Manufacturing Events. Green Manufacturing Events. (showing 1 - 1 of 1). Manufacturing Innovations ...

2011-06-20T23:59:59.000Z

27

Manufacturing Energy Portal  

Science Conference Proceedings (OSTI)

NIST Home > Manufacturing Energy Portal. Manufacturing Energy Portal. ... see all Manufacturing Energy programs and projects ... ...

2013-11-07T23:59:59.000Z

28

Manufacturing News  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

news Office of Energy Efficiency & news Office of Energy Efficiency & Renewable Energy Forrestal Building 1000 Independence Avenue, SW Washington, DC 20585 en FACTSHEET: Next Generation Power Electronics Manufacturing Innovation Institute http://energy.gov/articles/factsheet-next-generation-power-electronics-manufacturing-innovation-institute manufacturing-innovation-institute" class="title-link">FACTSHEET: Next Generation Power Electronics Manufacturing Innovation Institute

29

Manufacturing Growth  

Science Conference Proceedings (OSTI)

... report, even the lithium-ion batteries used in Chevy's much anticipated electric car, the Volt, are supplied by South Korean battery manufacturer LG ...

2013-07-31T23:59:59.000Z

30

Advanced Manufacturing  

Energy.gov (U.S. Department of Energy (DOE))

The U.S. Department of Energy funds the research, development, and demonstration of highly efficient and innovative manufacturing technologies. The Energy Department has supported the development...

31

The role of US agricultural and forest activities in global climate change mitigation  

E-Print Network (OSTI)

In 2005 the highest global surface temperature ever was recorded. A virtual consensus exists today among scientists that global warming is underway and that human greenhouse gas (GHG) emissions are a significant cause. Possible mitigation of climate change through reduction of net GHG emissions has become a worldwide concern. Under the United Nation’s Framework convention on Climate Change, the Kyoto Protocol was formed in 1997 and required ratifying countries to co-operate in stabilizing atmospheric GHG concentrations. The protocol took effect on February 16, 2005. The mitigation cost for reducing GHG emissions for the US economy has been argued to be high particularly through the energy sector. Agriculture and Forestry (AF) can provide some low cost strategies to help with this mitigation principally through carbon sequestration but must be competitive with mitigation costs in the rest of the economy. A general equilibrium approach is used herein to evaluate the role of AF mitigation in an economy wide setting. The results show that the AF sectors have significant mitigation potential. Higher carbon prices lead to more sequestration, less emissions, reduced consumer and total welfare, improved environmental indicators and increased producer welfare. AF mitigation increases as the carbon price increase over time. In the earlier periods, while the carbon price is low, AF emissions and sink are quite small compared to the energy sector. As carbon prices increase over time, the AF sectors mitigate about 25% of the net emissions. This verifies McCarl et al's (2001) argument that the AF sectors “may be very important in a world that requires time and technological investment to develop low-cost greenhouse gas emission offsets.” AF GHG emission mitigation is sensitive to saturation of sequestration sinks. This research finds that ignoring saturation characteristics leads to a severe overestimate of mitigation potential with estimates being inflated by as much as a factor of 6.

Zhu, En

2007-08-01T23:59:59.000Z

32

Manufacturing Extension Partnership, Manufacturing Data and ...  

Science Conference Proceedings (OSTI)

... Manufacturing Data & Trends. Manufacturing is a dynamic and changing industry. In this ... Voytek. DATA RESOURCES. Capacity ...

2013-06-17T23:59:59.000Z

33

Manufacturing technologies  

SciTech Connect

The Manufacturing Technologies Center is an integral part of Sandia National Laboratories, a multiprogram engineering and science laboratory, operated for the Department of Energy (DOE) with major facilities at Albuquerque, New Mexico, and Livermore, California. Our Center is at the core of Sandia`s Advanced Manufacturing effort which spans the entire product realization process.

NONE

1995-09-01T23:59:59.000Z

34

A recursive programming analysis of water conservation in Arizona agriculture : a study of the Phoenix active management area .  

E-Print Network (OSTI)

??Arizona agriculture faces many changes in the near future. One of the most imminent changes will come from the enactment of the 1980 Arizona Groundwater… (more)

Lierman, Wally Kent.

1983-01-01T23:59:59.000Z

35

Manufacturing technology  

SciTech Connect

The specific goals of the Manufacturing Technology thrust area are to develop an understanding of fundamental fabrication processes, to construct general purpose process models that will have wide applicability, to document our findings and models in journals, to transfer technology to LLNL programs, industry, and colleagues, and to develop continuing relationships with industrial and academic communities to advance our collective understanding of fabrication processes. Advances in four projects are described here, namely Design of a Precision Saw for Manufacturing, Deposition of Boron Nitride Films via PVD, Manufacturing and Coating by Kinetic Energy Metallization, and Magnet Design and Application.

Blaedel, K.L.

1997-02-01T23:59:59.000Z

36

Advanced Manufacturing Partnership  

Energy.gov (U.S. Department of Energy (DOE))

AMO leads DOE's participation in the national interagency Advanced Manufacturing Partnership (AMP). AMO joins with other Federal agencies investing in innovation and cost-shared R&D projects, supporting manufacturing infrastructure, and facilitating job creation. These actions save energy and provide benefits to U.S. industry and the national economy. AMO contributes more broadly to the AMP with activities in Technology Development, Shared Infrastructure and Facilities, Education and Workforce Development.

37

Advanced Manufacturing Office: News  

NLE Websites -- All DOE Office Websites (Extended Search)

Manufacturing Office: News on Twitter Bookmark Advanced Manufacturing Office: News on Google Bookmark Advanced Manufacturing Office: News on Delicious Rank Advanced Manufacturing...

38

Annual Survey of Manufactures | Data.gov  

NLE Websites -- All DOE Office Websites (Extended Search)

are measuring productivity, updating producer price indexes, evaluating and forecasting future industrial activity, benchmarking current data on manufacturing shipments...

39

Manufacturing Extension Partnership Homepage  

Science Conference Proceedings (OSTI)

... The Manufacturing Extension Partnership (MEP) is a catalyst for strengthening American manufacturing – accelerating its ongoing transformation ...

2013-08-23T23:59:59.000Z

40

Manufacturing Perspective  

NLE Websites -- All DOE Office Websites (Extended Search)

EOT_RT_Sub_Template.ppt | 1/6/2009 | 1 EOT_RT_Sub_Template.ppt | 1/6/2009 | 1 BOEING is a trademark of Boeing Management Company. Copyright © 2009 Boeing. All rights reserved. Compressed Hydrogen Storage Workshop Manufacturing Perspective Karl M. Nelson (karl.m.nelson@boeing.com) Boeing Research & Technology Engineering, Operations & Technology | Boeing Research & Technology Materials & Fabrication Technology EOT_RT_Sub_Template.ppt | 1/12/2009 | Structural Tech 2 Copyright © 2009 Boeing. All rights reserved. DOE Hydrogen Program Development of Advanced Manufacturing Technologies for Low Cost Hydrogen Storage Vessels Mark Leavitt, Alex Ly Quantum Fuel Systems Technologies Worldwide Inc. Karl Nelson, Brice Johnson The Boeing Company Ken Johnson, Kyle Alvine, Stan Pitman, Michael Dahl, Daryl Brown

Note: This page contains sample records for the topic "activity manufacturing agriculture" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Manufacturing technology  

SciTech Connect

This bulletin depicts current research on manufacturing technology at Sandia laboratories. An automated, adaptive process removes grit overspray from jet engine turbine blades. Advanced electronic ceramics are chemically prepared from solution for use in high- voltage varistors. Selective laser sintering automates wax casting pattern fabrication. Numerical modeling improves performance of photoresist stripper (simulation on Cray supercomputer reveals path to uniform plasma). And mathematical models help make dream of low- cost ceramic composites come true.

Leonard, J.A.; Floyd, H.L.; Goetsch, B.; Doran, L. [eds.

1993-08-01T23:59:59.000Z

42

ATS materials/manufacturing  

SciTech Connect

The Materials/Manufacturing Technology subelement is a part of the base technology portion of the Advanced Turbine Systems (ATS) Program. The work in this subelement is being performed predominantly by industry with assistance from national laboratories and universities. The projects in this subelement are aimed toward hastening the incorporation of new materials and components in gas turbines. Work is currently ongoing on thermal barrier coatings (TBCs), the scale-up of single crystal airfoil manufacturing technologies, materials characterization, and technology information exchange. This paper presents highlights of the activities during the past year. 12 refs., 24 figs., 4 tabs.

Karnitz, M.A.; Wright, I.G.; Ferber, M.K. [and others

1997-11-01T23:59:59.000Z

43

Agriculture Information at NIST  

Science Conference Proceedings (OSTI)

NIST Home > Agriculture Information at NIST. Agriculture Information at NIST. CCQM BAWG - P113, Relative Quantification ...

2010-09-23T23:59:59.000Z

44

Manufacturing Science and Technology: Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

Machining Machining PDF format (236 kb) MS&T's machining group consists of two departments: Manufacturing Processing, and Manufacturing Processes and Services. The two departments team to build, procure, and assemble unique prototype and production hardware with diverse quality requirements. The in-house capability can manufacture hardware ranging from microscopic to proportions measured in feet and tons. The group's outside contacts and resources are almost boundless. This team's expertise includes: precision machining, welding, fabrication and assembly, aircraft quality sheet metal construction, and explosives machining and assembly. The department can manage a variety of activities: design modifications, in-house fabrication, outside shop selection and surveillance and manufacturing records management.

45

Methods to Manufacture Cermets  

NLE Websites -- All DOE Office Websites (Extended Search)

Manufacture Cermets Methods to Manufacture Cermets There are many methods to manufacture cermets. One option is shown here. DU dioxide and steel powder are mixed, the mixture is...

46

Manufacturing Science and Technology: Advanced Manufacturing...  

NLE Websites -- All DOE Office Websites (Extended Search)

Contacts Advanced Manufacturing Trades Training Program Business Program Lead Yvonne Baros Advanced Manufacturing Trades Training Program Tom Souther Advanced Technology Academy...

47

Manufacturing Science and Technology: Advanced Manufacturing...  

NLE Websites -- All DOE Office Websites (Extended Search)

Skills Standards The Academic and Employability Skills Standards align Sandia's training efforts in advanced manufacturing with the recommendations of the Manufacturing Skill...

48

Manufacturing Glossary  

Gasoline and Diesel Fuel Update (EIA)

Energy Efficiency Web Site. If you need assistance in viewing this page, please call (202) 586-8800 Energy Efficiency Web Site. If you need assistance in viewing this page, please call (202) 586-8800 Home > Energy Users > Energy Efficiency Page > Glossary for the Manufacturing Sector Glossary For the Manufacturing Sector Barrel: A volumetric unit of measure equivalent to 42 U.S. gallons. Biomass: Organic nonfossil material of biological origin constituting a renewable energy source. Blast Furnace: A shaft furnace in which solid fuel (coke) is burned with an air blast to smelt ore in a continuous operation. Blast Furnace Gas: The waste combustible gas generated in a blast furnace when iron ore is being reduced with coke to metallic iron. It is commonly used as a fuel within the steel works. Boiler Fuel: An energy source to produce heat that is transferred to the boiler vessel in order to generate steam or hot water. Fossil fuels are the primary energy sources used to produce heat for boilers.

49

Fuel Cell Technologies Office: Manufacturing Research and Development  

NLE Websites -- All DOE Office Websites (Extended Search)

Manufacturing Research and Development The Fuel Cell Technologies Office's manufacturing research and development (R&D) activity improves processes and reduces the cost of...

50

Agriculture Residues Recycling  

E-Print Network (OSTI)

Abstract: Saudi Arabia, as well as other countries in the Near East region, is characterized by erratic weather conditions, limited area of fertile arable lands, and with acute water shortage. Although agricultural residues (AGR) production in the region is huge (more than 440 million tons), most of these residues are either burned in the field or utilized in an inefficient way. Utilization of AGR as compost may contribute to expansion of arable lands through its use for reclamation of soil and reduce irrigation requirements. This study was conducted at Al Khalidiah farm, Riyadh, Saudi Arabia to assess compost production at large commercial scale using several types of agricultural and animal by-products with addition of a BZT®Compost Activator (based mainly on microorganism, enzymes and yeast). In this study, two types of compost piles were made at the farm. The first pile of compost was made of different agriculture residues, namely: animal wastes (quail, goat and sheep manure), brownian agricultural wastes (windbreaks residues, date trees, citrus and olive trees pruning) and green landscape grasses (50%, 25 % and 25%, respectively) and was treated with a tested compost activator. The same agriculture residues combination was also made for the second pile as traditional compost

M. W. Sadik; H. M. El Shaer; H. M. Yakot

2010-01-01T23:59:59.000Z

51

Materials Processing & Manufacturing Division  

Science Conference Proceedings (OSTI)

In its broadest scope, the Materials Processing & Manufacturing Division (MPMD) covers manufacturing from product design to production, integrating process ...

52

Advanced Manufacturing Office: Solicitations  

NLE Websites -- All DOE Office Websites (Extended Search)

Solicitations on Twitter Bookmark Advanced Manufacturing Office: Solicitations on Google Bookmark Advanced Manufacturing Office: Solicitations on Delicious Rank Advanced...

53

Advanced Manufacturing Office: Webcasts  

NLE Websites -- All DOE Office Websites (Extended Search)

Office: Webcasts on Twitter Bookmark Advanced Manufacturing Office: Webcasts on Google Bookmark Advanced Manufacturing Office: Webcasts on Delicious Rank Advanced...

54

Advanced Manufacturing Office: Subscribe  

NLE Websites -- All DOE Office Websites (Extended Search)

Office: Subscribe on Twitter Bookmark Advanced Manufacturing Office: Subscribe on Google Bookmark Advanced Manufacturing Office: Subscribe on Delicious Rank Advanced...

55

Advanced Manufacturing Office: Workshops  

NLE Websites -- All DOE Office Websites (Extended Search)

Office: Workshops on Twitter Bookmark Advanced Manufacturing Office: Workshops on Google Bookmark Advanced Manufacturing Office: Workshops on Delicious Rank Advanced...

56

Additive Manufacturing - TMS  

Science Conference Proceedings (OSTI)

WEB RESOURCES: Research Groups for the Additive Manufacturing of Superalloys Compilation of groups involved in additive manufacturing, 0, 1118, Lynette ...

57

2010 Georgia Manufacturing Survey  

Science Conference Proceedings (OSTI)

... Linked to Innovation Manufacturing Wages by Percentages of Respondents ... Manufacturing Strategies by Industry Group (Percentage of firms ...

2013-07-31T23:59:59.000Z

58

Manufacturers use of business services  

SciTech Connect

This paper summarized findings from a Colorado and Utah survey of manufacturing and business service establishments which provided information on the use of business services among different types of firms in this interior region of the United States. The paper provides information which helps to shed light on various areas of inquiry on the relationship between manufacturers and producer services, but certainly calls for additional investigation. Most of the findings are consistent with those found by studies in other areas. Manufacturers are not a major source of sales for business service firms and the availability of business services is not cited as an important location consideration for manufacturers. Given the strong mining and agricultural sectors in these states, the fact that so little trade was with the primary sector may have been surprising. However, most of the responses in the surveys were from the urban areas of Denver and Salt Lake City. One of the hypotheses in the literature, as defined by Perry and Goe, concerns whether the growth in business services and the decline in manufacturing employment is a result of the trend toward the use of contracted services by manufacturers. The aggregate results of the study do not provide much evidence to support the proposition that this occurs. However, the results show that the larger firms internalize certain specialized business services more so than the smaller firms. The greater use company-provided legal services by the larger manufacturers is a case in point. This finding is consistent with Scott`s finding in the printed circuits industry in which larger establishments provided more functions internally than did the smaller establishments. In the case of engineering, architectural, and business management services it appears that many smaller manufacturers do not use such services at all, but that the larger establishments have more needs for professional services.

Calzonetti, F. [West Virginia Univ., Morgantown, WV (United States); Allison, T. [Argonne National Lab., IL (United States)

1992-12-31T23:59:59.000Z

59

Manufacturing Laboratory (Fact Sheet)  

DOE Green Energy (OSTI)

This fact sheet describes the purpose, lab specifications, applications scenarios, and information on how to partner with NREL's Manufacturing Laboratory at the Energy Systems Integration Facility. The Manufacturing Laboratory at NREL's Energy Systems Integration Facility (ESIF) focuses on developing methods and technologies that will assist manufacturers of hydrogen and fuel cell technologies, as well as other renewable energy technologies, to scale up their manufacturing capabilities to volumes that meet DOE and industry targets. Specifically, the manufacturing activity is currently focused on developing and validating quality control techniques to assist manufacturers of low temperature and high temperature fuel cells in the transition from low to high volume production methods for cells and stacks. Capabilities include initial proof-of-concept studies through prototype system development and in-line validation. Existing diagnostic capabilities address a wide range of materials, including polymer films, carbon and catalyst coatings, carbon fiber papers and wovens, and multi-layer assemblies of these materials, as well as ceramic-based materials in pre- or post-fired forms. Work leading to the development of non-contact, non-destructive techniques to measure critical dimensional and functional properties of fuel cell and other materials, and validation of those techniques on the continuous processing line. This work will be supported by materials provided by our partners. Looking forward, the equipment in the laboratory is set up to be modified and extended to provide processing capabilities such as coating, casting, and deposition of functional layers, as well as associated processes such as drying or curing. In addition, continuous processes are used for components of organic and thin film photovoltaics (PV) as well as battery technologies, so synergies with these important areas will be explored.

Not Available

2011-10-01T23:59:59.000Z

60

Secure Manufacturing | Y-12 National Security Complex  

NLE Websites -- All DOE Office Websites (Extended Search)

Secure Secure Manufacturing Secure Manufacturing The depth and breadth of Y-12's manufacturing capabilities and expertise enable Y-12 to address current and emerging national security challenges by providing leadership and direction to perform the following activities: solving unique, high-risk manufacturing problems; eliminating the most difficult manufacturability and development obstacles; protecting classified and proprietary materials, components, and information; developing unique technologies to optimize manufacturing and systems performance; and executing projects cost effectively and with timeliness. Y-12 accomplishes this mission to meet the national security challenges of today and those of the future, with capability and expertise in the following areas:

Note: This page contains sample records for the topic "activity manufacturing agriculture" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Agricultural Microscopy Division Of Interest  

Science Conference Proceedings (OSTI)

Agricultural Microscopy, Reports, Journals, Websites Agricultural Microscopy Division Of Interest Agricultural Microscopy agri-food sector agricultural Agricultural Microscopy analytical aocs articles biotechnology courses detergents division divisions f

62

Energy-Related Carbon Emissions in Manufacturing  

U.S. Energy Information Administration (EIA) Indexed Site

Energy Energy-Related Carbon Emissions Energy Energy-Related Carbon Emissions Detailed Energy-Related Carbon Emissions All Industry Groups 1994 emissions Selected Industries Petroleum refining Chemicals Iron & Steel Paper Food Stone, clay and glass Methodological Details Estimation methods Glossary Return to: Energy and GHG Analysis Efficiency Page Energy Use in Manufacturing Energy-Related Carbon Emissions in Manufacturing Manufacturing, which accounts for about 80 percent of industrial energy consumption, also accounts for about 80 percent of industrial energy-related carbon emissions. (Agriculture, mining, forestry, and fisheries account for the remaining 20 percent.) In 1994, three industries, petroleum, chemicals, and primary metals, emitted almost 60 percent of the energy-related carbon in manufacturing. The next three largest emitters (paper, food, and the stone, glass, and clay products industry) produced an additional 22 percent of the energy-related manufacturing emissions (Figure 1).

63

List of Agricultural Equipment Incentives | Open Energy Information  

Open Energy Info (EERE)

Agricultural Equipment Incentives Agricultural Equipment Incentives Jump to: navigation, search The following contains the list of 90 Agricultural Equipment Incentives. CSV (rows 1 - 90) Incentive Incentive Type Place Applicable Sector Eligible Technologies Active Agricultural Energy Efficiency Program (New York) State Rebate Program New York Agricultural Agricultural Equipment Boilers Chillers Custom/Others pending approval Dishwasher Furnaces Heat pumps Heat recovery Lighting Lighting Controls/Sensors Motor VFDs Motors Water Heaters Commercial Cooking Equipment Commercial Refrigeration Equipment Food Service Equipment Yes Agricultural Lighting and Equipment Rebate Program (Vermont) State Rebate Program Vermont Agricultural Agricultural Equipment Custom/Others pending approval Lighting

64

Manufacturing Science and Technology: Advanced Manufacturing...  

NLE Websites -- All DOE Office Websites (Extended Search)

precision machining technology, automated machining and manufacturing technology, welding, photonics technology, microelectromechanical systems (MEMS), and testing and...

65

Manufacturing Consumption of Energy 1994  

U.S. Energy Information Administration (EIA) Indexed Site

energy data used in this report do not reflect adjustments for losses in electricity generation or transmission. energy data used in this report do not reflect adjustments for losses in electricity generation or transmission. 1 The manufacturing sector is composed of establishments classified in Standard Industrial Classification 20 through 39 of the U.S. economy as defined 2 by the Office of Management and Budget. The manufacturing sector is a part of the industrial sector, which also includes mining; construction; and agriculture, forestry, and fishing. The EIA also conducts energy consumption surveys in the residential, commercial buildings, and residential transportation sectors: the Residential Energy 3 Consumption Survey (RECS); the Commercial Buildings Energy Consumption Survey (CBECS); and, until recently, the Residential Transportation Energy Consumption Survey (RTECS).

66

Barron Electric Cooperative - Commercial, Industrial, and Agricultural  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Barron Electric Cooperative - Commercial, Industrial, and Barron Electric Cooperative - Commercial, Industrial, and Agricultural Energy Efficiency Rebate Program Barron Electric Cooperative - Commercial, Industrial, and Agricultural Energy Efficiency Rebate Program < Back Eligibility Agricultural Commercial Industrial Savings Category Other Heating & Cooling Commercial Heating & Cooling Cooling Appliances & Electronics Commercial Lighting Lighting Manufacturing Maximum Rebate $10,000 per account, not to exceed 20% of cost Scroll Refrigeration Compressors: $500 Variable Speed/Frequency Drive Motor: $500 Variable Speed Compressed Air Motor: $500 Energy Audit: One in Five Years Program Info State Wisconsin Program Type Utility Rebate Program Rebate Amount Energy Audit: Free General Lighting: $1 - $15/unit LED Lamps: $2/bulb

67

The President's Manufacturing Initiative  

NLE Websites -- All DOE Office Websites (Extended Search)

The President's The President's Manufacturing Initiative Manufacturing Initiative Roadmap Workshop on Roadmap Workshop on Manufacturing R&D for Manufacturing R&D for the Hydrogen Economy the Hydrogen Economy Washington, D.C. Washington, D.C. July 13, 2005 July 13, 2005 Dale Hall Dale Hall Acting Chair, Interagency Working Group on Acting Chair, Interagency Working Group on Manufacturing Research and Development Manufacturing Research and Development National Science and Technology Council National Science and Technology Council and and Director, Manufacturing Engineering Laboratory Director, Manufacturing Engineering Laboratory National Institute of Standards and Technology National Institute of Standards and Technology U.S. Department of Commerce U.S. Department of Commerce

68

Manufacturing Day 2012  

Science Conference Proceedings (OSTI)

... City, I had the opportunity to visit GAL Manufacturing Corp., an elevator parts manufacturer in the Bronx, right down the road from Yankee Stadium. ...

2013-02-28T23:59:59.000Z

69

Microelectronics Manufacturing Infrastructure  

Science Conference Proceedings (OSTI)

... But the manufacturing infrastructure is aging. ... to create an integrated infrastructure for manufacturing ... will enhance the value and utility of portable ...

2011-10-19T23:59:59.000Z

70

Agricultural Improvement Loan Program (Minnesota) | Open Energy...  

Open Energy Info (EERE)

Loan Program Applicable Sector Agricultural Eligible Technologies Anaerobic Digestion, Biomass, Wind Active Incentive Yes Implementing Sector StateTerritory Energy Category...

71

Benton PUD - Commercial and Agricultural Energy Efficiency Rebate Programs  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Commercial and Agricultural Energy Efficiency Rebate Commercial and Agricultural Energy Efficiency Rebate Programs Benton PUD - Commercial and Agricultural Energy Efficiency Rebate Programs < Back Eligibility Agricultural Commercial Savings Category Other Manufacturing Appliances & Electronics Commercial Lighting Lighting Program Info State District of Columbia Program Type Utility Rebate Program Rebate Amount Custom Projects: Varies widely, no predetermined amount Agriculture: Varies widely, no predetermined amount Commercial Lighting: Not specified Provider Benton PUD Benton PUD offers a variety of incentives to non-residential customers for energy efficiency improvements. Projects are available for commercial customers interested in energy efficient lighting and custom projects that improve efficiency or process related systems such as compressed air,

72

Linn County Rural Electric Cooperative - Agricultural Energy Efficiency  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Linn County Rural Electric Cooperative - Agricultural Energy Linn County Rural Electric Cooperative - Agricultural Energy Efficiency Rebate Program Linn County Rural Electric Cooperative - Agricultural Energy Efficiency Rebate Program < Back Eligibility Agricultural Savings Category Other Heating & Cooling Commercial Heating & Cooling Cooling Appliances & Electronics Home Weatherization Construction Commercial Weatherization Design & Remodeling Heat Pumps Heating Commercial Lighting Lighting Manufacturing Water Heating Maximum Rebate 50% of installed costs Geothermal Heat Pumps: 20 tons General: See equipment brochure for specific technology incentive caps Program Info State Iowa Program Type Utility Rebate Program Rebate Amount Indoor Agricultural Lighting: Varies; see program web site Dairy/Livestock: Varies

73

Agricultural Carbon Mitigation in Europe  

NLE Websites -- All DOE Office Websites (Extended Search)

Agricultural Carbon Mitigation in Europe Agricultural Carbon Mitigation in Europe Agricultural Carbon Mitigation in Europe Smith P, Powlson DS, Smith JU, Falloon P, and Coleman K. 2000. Meeting Europe's climate change commitments: Quantitative estimates of the potential for carbon mitigation by agriculture. Global Climate Change 6:525-539. Abstract Under the Kyoto Protocol, the European Union is committed to a reduction in CO2 emissions to 92% of baseline (1990) levels during the first commitment period (2008-2012). The Kyoto Protocol allows carbon emissions to be offset by demonstrable removal of carbon from the atmosphere. Thus, land-use / land-management change and forestry activities that are shown to reduce atmospheric CO2 levels can be included in the Kyoto targets. These activities include afforestation, reforestation and deforestation (article

74

Locating Chicago Manufacturing  

E-Print Network (OSTI)

and engineering.3 The Chicago Manufacturing Renaissance Council itself is a unique public-private partnership

Illinois at Chicago, University of

75

Topic: Sustainable Manufacturing  

Science Conference Proceedings (OSTI)

... Project. Sustainable Manufacturing Program. Sustainability Characterization for Product Assembly Processes Project. Testbed ...

2012-09-19T23:59:59.000Z

76

Manufacturing Simulation Portal  

Science Conference Proceedings (OSTI)

... in planning by robots in scenarios relevant to … more. ... SUSTAINABLE MANUFACTURING PROCESS ANALYSIS APPLICATIONS DEVELOPMENT. ...

2012-12-27T23:59:59.000Z

77

Manufacturing | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Science & Innovation » Energy Efficiency » Manufacturing Science & Innovation » Energy Efficiency » Manufacturing Manufacturing Learn how combined heat and power could strengthen U.S. manufacturing competitiveness, lower energy consumption and reduce harmful emissions. Learn how combined heat and power could strengthen U.S. manufacturing competitiveness, lower energy consumption and reduce harmful emissions. Manufacturing is the lifeblood of the American economy -- providing jobs for hard working American families and helping increase U.S. competitiveness in the global marketplace. The Energy Department is committed to growing America's manufacturing industry by helping companies become leaders in the production of clean energy technologies like electric vehicles, LED bulbs and solar panels. The

78

Heliostat manufacturing analysis  

DOE Green Energy (OSTI)

Results of a manufacturing cost analysis of heliostats are presented. The two primary objectives are: (1) providing a base for uniform cost analysis, and (2) providing facility and manufacturing cost estimates for planning purposes in the development of a heliostat industry. The manufacturing analysis provides materials, labor, equipment, and facility costs for each step in the manufacturing process. Detailed procedures are presented for cost estimates. These include estimating worksheets for each component of the manufacturing costs.

Drumheller, K.

1978-10-01T23:59:59.000Z

79

Manufacturing Science and Technology: Advanced Manufacturing...  

NLE Websites -- All DOE Office Websites (Extended Search)

Program Recognition Awards The AMTTP won Sandia's Silver President's Quality Award and the Manufacturing Science and Technology Center's Gold Recognition and Team Award. Letters of...

80

Advanced Manufacturing Office: Advanced Manufacturing Partnership  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

R&D projects, supporting manufacturing infrastructure, and facilitating job creation. These actions save energy and provide benefits to U.S. industry and the national...

Note: This page contains sample records for the topic "activity manufacturing agriculture" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Manufacturing Science and Technology: Advanced Manufacturing...  

NLE Websites -- All DOE Office Websites (Extended Search)

MEST & SIT Skills Standard Technical Institute Partners Training Areas Program Recognition Partners Contacts News Articles Advanced Manufacturing Trades Training Program (AMTTP)...

82

Short Course Agricultural Microscopy  

Science Conference Proceedings (OSTI)

Short Course in Agricultural Microscopy. Fargo North Dakota held June 13-16 2011. Sponsored by the Agricultural Microscopy Division of AOCS and the Great Plains Institute of Food Safety. Short Course Agricultural Microscopy Short Courses ...

83

Agricultural Improvement Loan Program  

Energy.gov (U.S. Department of Energy (DOE))

The Agricultural Improvement Loan Program is administered by the Minnesota Department of Agriculture through the Minnesota Rural Finance Authority (RFA) and provides loans to farmers for...

84

Agricultural Industrial Relations Bibliography  

E-Print Network (OSTI)

Relations Act: Report. Sacramento, CA: Office of the AuditorLabor Relations Law. Sacramento, CA: California Agricultural1975-76 and 1976-77. Sacramento, CA: California Agricultural

Brown, Cheryl L.; Dote, Grace; Edmonds, Christopher M.; Perloff, Jeffrey M.; Rosenberg, Howard R.; Xiong, Nanyan

1991-01-01T23:59:59.000Z

85

Advanced Manufacturing Office: Active Solicitations  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

. To view all current solicitations for the Office of Energy Efficiency and Renewable Energy, see the Solicitations for Business, Industry and Universities page. This list is...

86

Soap Manufacturing Technology  

Science Conference Proceedings (OSTI)

Soap producers as well as anyone with an interest in soap technology will benefit from the new AOCS Press Soap Manufacturing Technology book. Soap Manufacturing Technology Surfactants and Detergents aocs articles Detergents division divisions fabric

87

Green Manufacturing News  

Science Conference Proceedings (OSTI)

... New MEP Advisory Board White Paper Assesses the Present and Future of American Manufacturing Release Date: 04/13/2010 ...

2010-10-27T23:59:59.000Z

88

Technology Development and Manufacturing ...  

Science Conference Proceedings (OSTI)

... Manufacturing Tax Credits; Loan Guarantees – Renewable Energy • FY 11 Budget- Univ. ... Products China Philippines Czech Republic 25 30 35 ...

2013-06-11T23:59:59.000Z

89

Sustainable Manufacturing Briefing  

Science Conference Proceedings (OSTI)

... enhance their brands. • Is sustainability an opportunity or cost? There is no ... demonstrate, deploy, and accredit new sustainable manufacturing ...

2012-08-29T23:59:59.000Z

90

Manufacturing Extension Partnership  

Science Conference Proceedings (OSTI)

... research and development programs with manufacturing and military applications including robotic deburring, automated lay up of thermoplastic ...

2009-08-25T23:59:59.000Z

91

Testimonials from Manufacturing  

Science Conference Proceedings (OSTI)

... The economic environment is difficult for Cargill Corn Milling, as it is difficult for many manufacturing companies today. ...

2013-01-30T23:59:59.000Z

92

A Study to Assess Needed Improvements and Barriers in Planning and Delivering Agricultural Extension Activities in the Kurdistan Region of Iraq  

E-Print Network (OSTI)

The purpose of this study was to assess planning and delivering agricultural extension activities in the Kurdistan region of Iraq for future program implementation. The study was a descriptive research and used a modified Delphi technique to identify needed improvements and highlight barriers in planning and delivering extension activities by the willingness of extension workers. The population of the study was 50 MOAWR purposely selected government employees consisted of 10 extension experts, 15 extension administrators, and 25 extension agents. The study used three rounds web-based survey questionnaires. In Round I, the panelists were responded to two open ended questions to identify needed improvements and barriers in planning and delivering extension activities. The gathered information from Round I was examined, organized, and combined to create the second questionnaire for Round II. In Round II, the panelists were indicated their levels of agreement or disagreement about each needed improvement and barrier. The study employed a six-Likert scale with 1=”Strongly Agree”, 2=”Agree”, 3=”Somewhat Agree”, 4=”Somewhat Disagree”, 5=”Disagree”, and 6=”Strongly Disagree”. The needed improvements and barriers that received two-thirds of agreement (numbers 1 and 2 in the six-point Likert scale) were used to create the third questionnaire for Round III. In Round III, panelists were developed consensus by rating the statements that received two-third agreement in Round II. Equally, the same Round II six-point Likert scale was used in Round III. The result findings of the study were revealed to the demands of extension policy implementation in the region. The results of the study were summarized in three overall implementation theme areas: community based program development, building capacity program, and institutional structuring and three distinct research areas: leadership in extension, personal traits of extension agents, and external communication. Furthermore, the results of the study provided key points and details for each implementation theme and distinct research area.

Khoshnaw, Yousif Khalid

2013-08-01T23:59:59.000Z

93

EC-LEDS in the Agriculture Sector | Open Energy Information  

Open Energy Info (EERE)

the Agriculture Sector the Agriculture Sector Jump to: navigation, search Name EC-LEDS in the Agriculture Sector Agency/Company /Organization United States Department of Agriculture, United States Department of State Partner Ministry of Agriculture, Ministry of Environment Sector Climate, Land Focus Area Agriculture, Economic Development, Greenhouse Gas, Land Use Topics Adaptation, Implementation, Low emission development planning, -LEDS, Policies/deployment programs Program Start 2011 Program End 2013 Country Costa Rica, Kenya, Mexico, Vietnam Central America, Eastern Africa, Central America, South-Eastern Asia References Land Use Assessment Toolkit - Agriculture Resources[1] Overview Progress and Outcomes Capacity building activities include strengthening implementation of

94

Advanced Manufacturing Office: Technical Assistance  

NLE Websites -- All DOE Office Websites (Extended Search)

Assistance on Twitter Bookmark Advanced Manufacturing Office: Technical Assistance on Google Bookmark Advanced Manufacturing Office: Technical Assistance on Delicious Rank...

95

Advanced Manufacturing Office: Financial Opportunities  

NLE Websites -- All DOE Office Websites (Extended Search)

on Twitter Bookmark Advanced Manufacturing Office: Financial Opportunities on Google Bookmark Advanced Manufacturing Office: Financial Opportunities on Delicious Rank...

96

Agricultural Microscopy Division  

Science Conference Proceedings (OSTI)

The Agricultural Microscopy Division advances visual imaging in discerning the quality and content of ingredients and finished products of the feed, fertilizer, seed, and agri-food sectors. Agricultural Microscopy Division Divisions achievement ag

97

The Annual Agricultural Cycle  

E-Print Network (OSTI)

. Sman shad agriculture 1.WAV Length of track 00:44:03 Related tracks (include description/relationship if appropriate) Title of track The Annual Agricultural Cycle Translation of title Description (to be used in archive entry...

Zla ba sgrol ma

2009-11-16T23:59:59.000Z

98

Manufacturing Skills Certification System  

Science Conference Proceedings (OSTI)

... system to their business so that they utilize the skills certification system ... provide input to The Manufacturing Institute about aggregate skill needs of ...

2012-09-20T23:59:59.000Z

99

Wind Manufacturing Facilities  

Energy.gov (U.S. Department of Energy (DOE))

America's wind energy industry supports a growing domestic industrial base. Check out this map to find manufacturing facilities in your state.

100

Locating American Manufacturing:  

Science Conference Proceedings (OSTI)

... future of manufacturing in America but also ... as defined in the North American Industry Classification ... about two thirds of American metropolitan areas ...

2013-07-31T23:59:59.000Z

Note: This page contains sample records for the topic "activity manufacturing agriculture" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Manufacturing Portal Overview  

Science Conference Proceedings (OSTI)

... The manufacturing sector is an important source of US innovation, accounting for about 70 percent of US industry R&D. ...

2012-05-09T23:59:59.000Z

102

Acoustics by additive manufacturing.  

E-Print Network (OSTI)

??This study focuses on exploring the merging field of additive manufacturing and acoustics and introduces a new type of sound absorber which is regulating performance… (more)

Setaki, F.

2012-01-01T23:59:59.000Z

103

Manufacturing Research & Reports  

Science Conference Proceedings (OSTI)

... Regulatory and Policy Recommendations. The impact of regulations and policies on the manufacturing industry in areas such as tax, energy, trade ...

2013-08-27T23:59:59.000Z

104

US Manufacturing in Context  

Science Conference Proceedings (OSTI)

... manufacturing firms lead the Nation in exports: The $1.3 ... 86% of all US goods exported in 2011 ... growing production of domestic natural gas, and the ...

105

Baldrige by Sector: Manufacturing  

Science Conference Proceedings (OSTI)

Can a manufacturer facing global competition, increased pressure on costs, and the need to show quarterly profits benefit from the Baldrige process ...

2013-08-07T23:59:59.000Z

106

Innovations in Additive Manufacturing  

Science Conference Proceedings (OSTI)

Feb 16, 2010 ... Additive Manufacturing's Role in Fabrication and Repair of Aerospace Components: James Sears1; 1South Dakota School of Mines & ...

107

Manufacturing Energy Consumption Survey (MECS) - U.S. Energy Information  

U.S. Energy Information Administration (EIA) Indexed Site

Cost of Natural Gas Used in Manufacturing Sector Has Fallen Graph showing Cost of Natural Gas Used in Manufacturing Sector Has Fallen Source: U.S. Energy Information Administration, Manufacturing Energy Consumption Survey (MECS) 1998-2010, September 6, 2013. New 2010 Manufacturing Energy Consumption Survey (MECS) Data Released › Graph showing total U.S. manufacturing energy consumption for all purposes has declined 17 percent from 2002 to 2010. Source: U.S. Energy Information Administration, Manufacturing Energy Consumption Data Show Large Reductions in Both Manufacturing Energy Use and the Energy Intensity of Manufacturing Activity between 2002 and 2010, March 19, 2013. First Estimates from 2010 Manufacturing Energy Consumption Survey (MECS) Released ›

108

Manufacturing research strategic plan  

SciTech Connect

This plan provides an overall strategic roadmap for the DOE-defense programs advanced manufacturing research program which supports the national science based stockpile stewardship program. This plan represents a vision required to develop the knowledge base needed to ensure an enduring national capability to rapidly and effectively manufacture nuclear weapons.

1995-11-01T23:59:59.000Z

109

Worldwide Energy and Manufacturing USA Inc formerly Worldwide Manufacturing  

Open Energy Info (EERE)

Manufacturing USA Inc formerly Worldwide Manufacturing Manufacturing USA Inc formerly Worldwide Manufacturing USA Jump to: navigation, search Name Worldwide Energy and Manufacturing USA Inc (formerly Worldwide Manufacturing USA) Place San Bruno, California Zip 94066 Product Worldwide Manufacturing USA is an engineering company based in San Bruno, California. References Worldwide Energy and Manufacturing USA Inc (formerly Worldwide Manufacturing USA)[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Worldwide Energy and Manufacturing USA Inc (formerly Worldwide Manufacturing USA) is a company located in San Bruno, California . References ↑ "Worldwide Energy and Manufacturing USA Inc (formerly Worldwide Manufacturing USA)"

110

Integrating Energy Management and Lean Manufacturing  

E-Print Network (OSTI)

There is a close relationship between energy efficiency and lean manufacturing. Lean focuses on the continuous elimination of non-value added activities and waste in a manufacturing process. Energy management focuses on the continuous elimination of wasted energy in a manufacturing process. This paper will focus on industrial facilities that participated in a Power Smart Lean initiative with Manitoba Hydro. The objective of this service is to leverage lean principles by capitalizing on the synergies between lean manufacturing and energy management to increase the incorporation of energy efficiency into a manufacturing plant. Case studies are presented showing the resulting electric and gas saving opportunities from identifying and reducing wasted energy. Examples are presented to show the incidental energy savings realized by facilities that have used lean to improve productivity. Finally, case studies are discussed which demonstrate the utilization of lean approaches and tools with parallels to energy management.

Stocki, M.

2009-05-01T23:59:59.000Z

111

EI Summary of All Manufacturing SIC  

U.S. Energy Information Administration (EIA) Indexed Site

All (20-39) Food (20) Textiles (22) Apparel (23) Lumber (24) Furniture (25) Paper (26) Printing (27) Chemicals (28) Refineries (29) Rubber (30) Stone, Clay & Glass(32) Primary Metals (33) Fabricated Metals (34) Machinery (35) Electronic Equipment (36) Instruments (38) Miscellaneous Manufacturing (39) All (20-39) Food (20) Textiles (22) Apparel (23) Lumber (24) Furniture (25) Paper (26) Printing (27) Chemicals (28) Refineries (29) Rubber (30) Stone, Clay & Glass(32) Primary Metals (33) Fabricated Metals (34) Machinery (35) Electronic Equipment (36) Instruments (38) Miscellaneous Manufacturing (39) The manufacturing sector includes establishments engaged in the mechanical or chemical transformation of materials or substances into new products. These operations are generally conducted in facilities described as plants, factories, or mills, while characteristically using power-driven machines and material-handling equipment. Manufacturing also includes such activities as the assembly of components of manufactured products and the blending of materials, such as lubricating oil, plastics, resins, or liquors.

112

Agriculture, Forestry and Other Land Use Mitigation Project Database | Open  

Open Energy Info (EERE)

Agriculture, Forestry and Other Land Use Mitigation Project Database Agriculture, Forestry and Other Land Use Mitigation Project Database Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Agriculture, Forestry and Other Land Use Mitigation Project Database Agency/Company /Organization: Food and Agriculture Organization of the United Nations Sector: Land Focus Area: Forestry, Agriculture Resource Type: Dataset Website: www.fao.org/climatechange/67148/en/ RelatedTo: Mitigation of Climate Change in Agriculture (MICCA) Project Agriculture, Forestry and Other Land Use Mitigation Project Database Screenshot References: AFOLU Mitigation Database[1] Global Survey of Agricultural Mitigation Projects Paper[2] "The AFOLU MP database endeavors to gather information on all mitigation activities currently ongoing within the agricultural and forestry sectors

113

Advanced Manufacturing Office: U.S. Manufacturer Going Above...  

NLE Websites -- All DOE Office Websites (Extended Search)

U.S. Manufacturer Going Above and Beyond with Superior Energy Performance to someone by E-mail Share Advanced Manufacturing Office: U.S. Manufacturer Going Above and Beyond with...

114

Manufacturing Renaissance: Return of manufacturing to western countries.  

E-Print Network (OSTI)

??Manufacturing Renaissance, i.e. return of manufacturing to west, has been recently observed. This paper analyzes the patterns observed within each of the four main drivers… (more)

Kianian, Babak; Larsson, Tobias

2013-01-01T23:59:59.000Z

115

Industrial and agricultural process heat information user study  

DOE Green Energy (OSTI)

The results of a series of telephone interviews with groups of users of information on solar industrial and agricultural process heat (IAPH) are described. These results, part of a larger study on many different solar technologies, identify types of information each group needed and the best ways to get information to each group. In the current study only high-priority groups were examined. Results from 10 IAPH groups of respondents are analyzed in this report: IPH Researchers; APH Researchers; Representatives of Manufacturers of Concentrating and Nonconcentrating Collectors; Plant, Industrial, and Agricultural Engineers; Educators; Representatives of State Agricultural Offices; and County Extension Agents.

Belew, W.W.; Wood, B.L.; Marle, T.L.; Reinhardt, C.L.

1981-03-01T23:59:59.000Z

116

Innovations in Manufacturing  

NLE Websites -- All DOE Office Websites (Extended Search)

Gov. Haslam Cuts Ribbon at Carbon Fiber Facility Gov. Haslam Cuts Ribbon at Carbon Fiber Facility Governor Bill Haslam along with David Danielson, EERE's Assistant Secretary, celebrate the opening of the Carbon Fiber Technology Facility. The 390-ft. long processing line is capable of custom unit operation configuration and has a capacity of up to 25 tons per year, allowing industry to validate conversion of their carbon fiber precursors at semi-production scale. Manufacturing Demonstration Facility Manufacturing Demonstration Facility Processing Technologies Advanced Materials Automation and Controls Brochure News Manufacturing Engineering Advanced Materials & Processes Materials for Aerospace On the cover, plus, read ORNL's feature articles on additive manufacturing and its momentum for aerospace applications.

117

Manufacturer: Panasonic Battery Type: ...  

NLE Websites -- All DOE Office Websites (Extended Search)

Battery Specifi cations Manufacturer: Panasonic Battery Type: Nickel Metal Hydride Rated Capacity: 5.5 Ahr Rated Power: Not Available Nominal Pack Voltage: 158.4 VDC Nominal Cell...

118

Manufacturing Energy Consumption Survey (MECS) - Analysis & Projections -  

Gasoline and Diesel Fuel Update (EIA)

All Reports & Publications All Reports & Publications Search By: Go Pick a date range: From: To: Go ManufacturingAvailable formats Cost of Natural Gas Used in Manufacturing Sector Has Fallen Released: September 6, 2013 Natural gas has been an important exception to the trend of rising prices for energy sources used by manufacturers. Production of natural gas in the United States increased rapidly beginning in 2007 as a result of resources found in shale formations. That increase in supply has in turn lowered the price of natural gas to manufacturers Manufacturing Energy Consumption Data Show Large Reductions in Both Manufacturing Energy Use and the Energy Intensity of Manufacturing Activity between 2002 and 2010 Released: March 19, 2013 Total energy consumption in the manufacturing sector decreased by 17

119

Manufacturing Energy Consumption Survey (MECS) - Analysis & Projections -  

Gasoline and Diesel Fuel Update (EIA)

Manufacturing Energy Consumption Data Show Large Reductions in Both Manufacturing Energy Consumption Data Show Large Reductions in Both Manufacturing Energy Use and the Energy Intensity of Manufacturing Activity between 2002 and 2010 MECS 2010 - Release date: March 19, 2013 Total energy consumption in the manufacturing sector decreased by 17 percent from 2002 to 2010 (Figure 1), according to data from the U.S. Energy Information Administration's (EIA) Manufacturing Energy Consumption Survey (MECS). line chart:air conditioning in U.S. Manufacturing gross output decreased by only 3 percent over the same period. Taken together, these data indicate a significant decline in the amount of energy used per unit of gross manufacturing output. The significant decline in energy intensity reflects both improvements in energy efficiency and changes in

120

Agricultural Lighting and Equipment Rebate Program | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Agricultural Lighting and Equipment Rebate Program Agricultural Lighting and Equipment Rebate Program Agricultural Lighting and Equipment Rebate Program < Back Eligibility Agricultural Savings Category Other Appliances & Electronics Commercial Lighting Lighting Manufacturing Program Info Funding Source Efficiency Vermont Public Benefit Fund Expiration Date 06/30/2013 State Vermont Program Type State Rebate Program Rebate Amount Varies according to technology; prescriptive and custom rebates available Provider Efficiency Vermont In Vermont, agricultural operations are eligible for prescriptive and customized incentives on equipment proven to help make farms more efficient. Prescriptive rebates are available for lighting (free to $175 per fixture, depending on the type of fixture or lighting) and for a variety of equipment including plate coolers, variable speed milk transfer

Note: This page contains sample records for the topic "activity manufacturing agriculture" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Manufacturing Consumption of Energy 1994  

U.S. Energy Information Administration (EIA)

How Did Manufacturers Use Natural Gas? Manufacturers used natural gas in processes, in boilers, for nonprocess uses, and as feedstock. In 1991 and 1994, ...

122

Additive Manufacturing for Large Products.  

E-Print Network (OSTI)

?? This thesis researches the possibility and feasibility of applying additive manufacturing technology in the manufacturing of propellers. The thesis concerns the production at the… (more)

Leirvåg, Roar Nelissen

2013-01-01T23:59:59.000Z

123

Manufacturing Demonstration Facility Technology Collaborations...  

NLE Websites -- All DOE Office Websites (Extended Search)

advanced manufacturing and materials technologies for commercial applications related to additive manufacturing or carbon fiber and composites will have the highest likelihood of...

124

EERE: Advanced Manufacturing Office - Webmaster  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

23.5 Million Investment in Innovative Manufacturing Projects Supports the New Clean Energy Manufacturing Initiative March 26, 2013 New Energy Department Funding to Establish...

125

Manufacturing Consumption of Energy 1991  

U.S. Energy Information Administration (EIA) Indexed Site

3. Energy Consumption in the Manufacturing Sector, 1991 In 1991, the amount of energy consumed in the manufacturing sector was as follows: * Primary Consumption of Energy for All...

126

Advanced Manufacturing Office: Better Plants  

NLE Websites -- All DOE Office Websites (Extended Search)

Better Plants on Twitter Bookmark Advanced Manufacturing Office: Better Plants on Google Bookmark Advanced Manufacturing Office: Better Plants on Delicious Rank Advanced...

127

Advanced Manufacturing Office: Pump Systems  

NLE Websites -- All DOE Office Websites (Extended Search)

Pump Systems on Twitter Bookmark Advanced Manufacturing Office: Pump Systems on Google Bookmark Advanced Manufacturing Office: Pump Systems on Delicious Rank Advanced...

128

Agricultural Biomass Income Tax Credit (Corporate) (New Mexico...  

Open Energy Info (EERE)

Incentive Type Corporate Tax Credit Applicable Sector Agricultural Eligible Technologies Biomass Active Incentive Yes Incentive Inactive Date 12312019 Implementing Sector State...

129

Agricultural Biomass Income Tax Credit (Personal) (New Mexico...  

Open Energy Info (EERE)

Incentive Type Personal Tax Credit Applicable Sector Agricultural Eligible Technologies Biomass Active Incentive Yes Implementing Sector StateTerritory Energy Category Renewable...

130

Integrated Agricultural Technologies Demonstrations  

Science Conference Proceedings (OSTI)

Major challenges currently face California's agricultural community. Increasingly stringent environmental and regulatory controls mandate changes in the use and disposal of agricultural chemicals, require the more aggressive management of farm wastes, and impose new responsibilities for water use. This program demonstrated a number of energy efficient and environmentally friendly technologies designed to address these issues.

2002-08-02T23:59:59.000Z

131

Agricultural Microscopy Division List  

Science Conference Proceedings (OSTI)

Name AffiliationCity, State, CountryAgricultural Microscopy Division2013 Members72 Members as of October 1, 2013Ajbani, RutviInstitute of Chemical TechnologyMumbai, MH, IndiaAlonso, CarmenPuerto Rico Dept ofAgricultureDorado, Puerto RicoArmbrust, KevinLoui

132

Publications Agricultural Economics  

E-Print Network (OSTI)

. (2012). Economics of IPM Decisions. Stored Product Protection (1- 9). Manhattan, KS: Kansas State (1-11). Manhattan, KS: Kansas State. http://entomology.k-state.edu/doc/finished- chapters/s156-ch-27 of Food and Agriculture­ Conservation Effects Assessment Project. How to Build Better Agricultural

133

College of Agriculture Departments and Degree Programs Agricultural  

E-Print Network (OSTI)

Agricultural Education Animal & Range Sciences Land Resources & Environmental Sciences Immunology & Infectious Diseases Multi Disciplinary Agricultural Business Agricultural Education Animal Science Natural Resources & Rangeland Ecology Environmental Sciences Pre-Vet Program (non-degree) Biotechnology Sustainable Foods

Lawrence, Rick L.

134

Wind Energy & Manufacturing | Open Energy Information  

Open Energy Info (EERE)

Wind Energy & Manufacturing Wind Energy & Manufacturing Jump to: navigation, search Blades manufactured at Gamesa's factory in Ebensburg, Pennsylvania, await delivery for development of wind farms across the country in the United States. Photo from Gamesa, NREL 16001 Wind power creates new high-paying jobs in a wide variety of industries. This includes direct jobs installing, operating, and maintaining wind turbines, as well as jobs at manufacturing facilities that produce wind turbines, blades, electronic components, gearboxes, generators, towers, and other equipment. Indirect jobs in the industries that support these activities are also created.[1] In 2012, 72% of the wind turbine equipment (including towers, blades, and gears) installed in the United States during the year was made in

135

Request for Information Manufacturing Technology ...  

Science Conference Proceedings (OSTI)

... Page 4. Confidential. All Rights Reserved. ... o The energy sector is representing significant opportunities for manufacturers. ...

2013-08-06T23:59:59.000Z

136

Electrolyzer Manufacturing Progress and Challenges  

NLE Websites -- All DOE Office Websites (Extended Search)

Electrolyzer Manufacturing Electrolyzer Manufacturing Progress and Challenges John Torrance, Director of Manufacturing DOE Manufacturing Workshop 8/12/11 Outline * Proton Commercialization Status: PEM Electrolysis * Current Manufacturing Limitations: Stack - Cost Breakdown - Approaches * Current Manufacturing Limitations: System - Cost Breakdown - Approaches * Potential Impact * Summary and Conclusions 2 3 * World leader in Proton Exchange Membrane (PEM) electrolyzer technology * Founded in 1996 - changed name from Proton Onsite in April 2011 to reflect product expansion. * ISO 9001:2008 registered * Over 1,500 systems operating in 62 different countries. Cell Stacks Complete Systems Turnkey Solutions Military Applications Proton Energy Proton Onsite Headquarters in Wallingford, CT Capabilities * Complete product development, manufacturing & testing

137

Agriculture, technology, and conflict  

E-Print Network (OSTI)

Conflict and agriculture have a long, shared history. The purpose of this research is to look at the relationships between agriculture, agricultural technologies, and conflict during current and recent conflicts, large scale and localized. Agriculture and its related technologies are often affected by conflict, but rarely acknowledged as a cause or solution to conflict. Literature reviews in six topic areas illustrate various facets of the relationship between agriculture and conflict. Research conducted in Santa Cruz del Quiché, Guatemala illustrates the ways farmers were impacted by the country’s civil war. It also examines farmer survival strategies during the war, and reveals the presence of minor localized conflict over water resources. Conflict over land is not a major concern at present. Market access for inputs and outputs are shown to have been a problem for a number of farmers during the civil war. The poverty of Santa Cruz farmers indicates that much could be gained by rural development. Research is unable to support the hypotheses that agricultural technologies have prevented or caused conflict in Santa Cruz del Quiché, or that they have played a large role in recovery from the country’s civil war. The author recommends that future research be undertaken in regions with a diverse set of agricultural technologies, and/or a recent history of significant technological change in agriculture. Policy recommendations include providing secure access to markets during war time, increasing capacity for home-based rural production, and continuing research into resilient crops. Finally, the author suggests that the responsible decision to develop, adopt, or introduce an agricultural technology must take into account the social consequences of that decision, including how the new technology may alleviate or contribute to conflict.

Zilverberg, Cody John

2007-05-01T23:59:59.000Z

138

Photovoltaic manufacturing technology  

DOE Green Energy (OSTI)

This report identifies steps leading to manufacturing large volumes of low-cost, large-area photovoltaic (PV) modules. Both crystalline silicon and amorphous silicon technologies were studied. Cost reductions for each step were estimated and compared to Solarex Corporation's manufacturing costs. A cost model, a simple version of the SAMICS methodology developed by the Jet Propulsion Laboratory (JPL), projected PV selling prices. Actual costs of materials, labor, product yield, etc., were used in the cost model. The JPL cost model compared potential ways of lowering costs. Solarex identified the most difficult technical challenges that, if overcome, would reduce costs. Preliminary research plans were developed to solve the technical problems. 13 refs.

Wohlgemuth, J.H.; Whitehouse, D.; Wiedeman, S.; Catalano, A.W.; Oswald, R. (Solarex Corp., Frederick, MD (United States))

1991-12-01T23:59:59.000Z

139

Characteristics of Manufacturing Processes  

Science Conference Proceedings (OSTI)

Table 2   Rating of characteristics for common manufacturing processes...AHB, Vol 4 CVD/PVD All 1 5 5 4 3 AHB, Vol 13, p 456 Rating scheme: 1, poorest; 5, best. Ratings from Ref 5 . AHB, ASM Handbook ; EMH, Engineered

140

Turbine airfoil manufacturing technology  

DOE Green Energy (OSTI)

The specific goal of this program is to define manufacturing methods that will allow single crystal technology to be applied to complex-cored airfoils components for power generation applications. Tasks addressed include: alloy melt practice to reduce the sulfur content; improvement of casting process; core materials design; and grain orientation control.

Kortovich, C. [PCC Airfoils, Inc., Beachwood, OH (United States)

1995-12-31T23:59:59.000Z

Note: This page contains sample records for the topic "activity manufacturing agriculture" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Overshooting of agricultural prices  

E-Print Network (OSTI)

Rotenberg, Julio J. , "Sticky Prices in the United States,"Monetary Policy on United States Agriculture. A Fix-Price,Flex-Price Approach," Unpublished Ph.D. Disser- tation,

Stamoulis, Kostas G.; Rausser, Gordon C.

1987-01-01T23:59:59.000Z

142

Agricultural Meteorology in China  

Science Conference Proceedings (OSTI)

During nearly five weeks in China (May–June 1981), the author visited scientific institutions and experiment stations engaged in agricultural meterology and climatology research and teaching. The facilities, studies, and research programs at each ...

Norman J. Rosenberg

1982-03-01T23:59:59.000Z

143

Sustainable Manufacturing in the Systems Integration Division  

Science Conference Proceedings (OSTI)

... Sustainability Modeling and Optimization Project. Sustainability of Unit Manufacturing Processes Project. Sustainable Manufacturing Program. ...

2011-12-23T23:59:59.000Z

144

Greenhouse gases and agriculture. Book chapter  

SciTech Connect

Agriculture ranks third in its contribution to Earth's anthropogenically enhanced greenhouse effect. (Energy use and production and chlorofluorocarbons are ranked first and second, respectively.) Specifically, greenhouse gas sources and sinks are increased, and sinks are decreased, by conversion of land to agricultural use, using fertilizers, cultivating paddy rice, producing other plant and animal crops, and by creating and managing animal and plant wastes. However, some of these same activities increase greenhouse gas sinks and decrease greenhouse gas sources so the net effects are not obvious. The paper identifies the agricultural inputs, outputs, and wastes that alter atmospheric concentrations of carbon dioxide, methane, and nitrous oxides, and discusses agriculture's net impact on greenhouse gas fluxes.

Jackson, R.B.

1993-01-01T23:59:59.000Z

145

Manufacturing Science and Technology: Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

Manufacturing Information Integration & Infrastructure Manufacturing Information Integration & Infrastructure PDF format (47 kb) The Information Infrastructure Team in the Computer Applications for Manufacturing organization can provide programming and analysis support for information applications for manufacturing. The Team works closely with customers to help them define their requirements. The Team's experience and expertise can help your manufacturing information needs. Capabilities Provide computer hardware and software standards that directly support the seamless manufacturing initiative. Develop graphical user interfaces (GUI) for applications using the proprietary Windows environment or an open system design using Web servers and client browsers. Provide computer hardware support, including all personal computer

146

Transformational Manufacturing | Argonne National Laboratory  

NLE Websites -- All DOE Office Websites (Extended Search)

Transformational Manufacturing Transformational Manufacturing Argonne's new Advanced Battery Materials Synthesis and Manufacturing R&D Program focuses on scalable process R&D to produce advanced battery materials in sufficient quantity for industrial testing. The U.S. manufacturing industry consumes more than 30 quadrillion Btu of energy per year, directly employs about 12 million people and generates another 7 million jobs in related businesses. Argonne is working with industry to develop innovative and transformational technology to improve the efficiency and competitiveness of domestic manufacturing while reducing its carbon footprint. The lab's efforts concentrate on sustainable manufacturing, applied nanotechnology and distributed energy, with an emphasis on transitioning science discoveries to the market.

147

MDF | Manufacturing Demonstration Facility | ORNL  

NLE Websites -- All DOE Office Websites (Extended Search)

BTRIC CNMS CSMB CFTF HFIR MDF Working with MDF NTRC OLCF SNS Titanium robotic hand holding sphere fabricated using additive manufacturing Home | User Facilities | MDF MDF | Manufacturing Demonstration Facility SHARE As the nation's premier research laboratory, ORNL is one of the world's most capable resources for transforming the next generation of scientific discovery into solutions for rebuilding and revitalizing America's manufacturing industries. Manufacturing industries engage ORNL's expertise in materials synthesis, characterization, and process technology to reduce technical risk and validate investment for innovations targeting products of the future. DOE's Manufacturing Demonstration Facility, established at ORNL, helps industry adopt new manufacturing technologies to reduce life-cycle energy

148

Manufacturing News | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Manufacturing Manufacturing News Manufacturing News RSS January 15, 2014 FACTSHEET: Next Generation Power Electronics Manufacturing Innovation Institute The Obama Administration announces the selection of North Carolina State University to lead a public-private manufacturing innovation institute for next generation power electronics. November 22, 2013 In Cleveland, Alcoa and ArcelorMittal Recognized for Leadership in Energy Efficiency As Part of Obama Administration's Better Plants Program, U.S. Manufacturers Cut Energy Waste and Save Money October 21, 2013 FACT SHEET: Energy Department Actions to Deploy Combined Heat and Power, Boost Industrial Efficiency Underscoring President Obama's Climate Action Plan to cut harmful emissions and double energy efficiency, the Energy Department is taking

149

MDF | Manufacturing Demonstration Facility | ORNL  

NLE Websites -- All DOE Office Websites (Extended Search)

Working with MDF Working with MDF Titanium robotic hand holding sphere fabricated using additive manufacturing Home | User Facilities | MDF MDF | Manufacturing Demonstration Facility SHARE As the nation's premier research laboratory, ORNL is one of the world's most capable resources for transforming the next generation of scientific discovery into solutions for rebuilding and revitalizing America's manufacturing industries. Manufacturing industries engage ORNL's expertise in materials synthesis, characterization, and process technology to reduce technical risk and validate investment for innovations targeting products of the future. DOE's Manufacturing Demonstration Facility, established at ORNL, helps industry adopt new manufacturing technologies to reduce life-cycle energy

150

Manufacturing Initiative | Clean Energy | ORNL  

NLE Websites -- All DOE Office Websites (Extended Search)

Research Areas Research Areas Buildings Climate & Environment Manufacturing Fossil Energy Sensors & Measurement Sustainable Electricity Systems Biology Transportation Clean Energy Home | Science & Discovery | Clean Energy | Research Areas | Manufacturing SHARE Manufacturing Initiative Titanium robotic hand holding sphere fabricated using additive manufacturing Oak Ridge National Laboratory is supporting the DOE's Office of Energy Efficiency and Renewable Energy (EERE) Clean Energy Manufacturing Initiative focusing on American competitiveness in clean energy manufacturing. The DOE Initiative has two primary objectives-increase US competitiveness in the production of clean energy products (e.g., wind turbines, solar panels, energy efficient appliances, light bulbs, vehicles and automotive

151

Manufacturing News | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Manufacturing Manufacturing News Manufacturing News RSS August 3, 2011 Department of Energy Announces Philips Lighting North America as Winner of L Prize Competition Philips Product Delivers on Department's Challenge to Replace Common Light Bulb with Energy-Saving Lighting Alternative August 2, 2011 Department of Energy to Invest $50 Million to Advance Domestic Solar Manufacturing Market, Achieve SunShot Goal SUNPATH Program Will Boost American Competitiveness, Lower Cost of Solar Energy June 29, 2011 Department of Energy Announces New Partnerships to Support Manufacturing Job Training National Training and Education Resource (NTER) Offers Tools to Train Workers June 24, 2011 Department of Energy Announces $120 Million to Support Development of Innovative Manufacturing Processes

152

Industrial and Agricultural Production Efficiency Program | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Industrial and Agricultural Production Efficiency Program Industrial and Agricultural Production Efficiency Program Industrial and Agricultural Production Efficiency Program < Back Eligibility Agricultural Industrial Savings Category Other Heating & Cooling Commercial Heating & Cooling Heating Home Weatherization Commercial Weatherization Cooling Manufacturing Sealing Your Home Ventilation Heat Pumps Appliances & Electronics Commercial Lighting Lighting Insulation Design & Remodeling Water Heating Maximum Rebate Custom capital projects: $0.25/kWh, up to 50% of cost; $2/Therm, up to 50% of project cost Custom operation and maintenance projects: $0.08/kWh or $0.40/Therm, up to 50% of project cost Lighting projects: custom lighting incentives get 35% of project cost; prescriptive incentives also available. Total incentive capped at

153

Agricultural Energy Efficiency Program (New York) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Agricultural Energy Efficiency Program (New York) Agricultural Energy Efficiency Program (New York) Agricultural Energy Efficiency Program (New York) < Back Eligibility Agricultural Savings Category Other Heating & Cooling Commercial Heating & Cooling Heating Cooling Appliances & Electronics Heat Pumps Commercial Lighting Lighting Manufacturing Water Heating Maximum Rebate $250,000 per farm Program Info Funding Source System Benefits Charge (SBC) Expiration Date 12/01/2015 State New York Program Type State Rebate Program Rebate Amount General: 75% of project costs Energy Audits: up to $2,500 (cost share may be required for audit costs exceeding this amount) Provider New York State Energy Research and Development Authority The New York State Energy Research and Development Authority (NYSERDA) offers incentives for electric and natural gas efficiency improvements made

154

Inland Power and Light Company - Agricultural Energy Efficiency Rebate  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Agricultural Energy Efficiency Agricultural Energy Efficiency Rebate Programs Inland Power and Light Company - Agricultural Energy Efficiency Rebate Programs < Back Eligibility Agricultural Savings Category Other Manufacturing Maximum Rebate Custom: 70% or project cost Program Info State District of Columbia Program Type Utility Rebate Program Rebate Amount Flow controlling type nozzle for impact sprinklers: $4 Rebuilt or New Impact Sprinklers: $3.75 Nozzle for Impact Sprinkler: $1.50 Rotating Type Sprinklers: $4 Gasket: $2.75 Low-Pressure Regulators: $5 Low-Pressure Sprinklers: $4 Multiple Configuration Nozzles: $3 Multi-Trajectory Sprays: $4 Drains for Lines: $1 Hubs for Wheel-Lines: $14.50 "Goose Neck" Elbow for New Drop Tubes: $1.65 Drop Tubes: $3 Center Pivot Base Boot Gasket: $175

155

Low Cost Lithography Tool for High Brightness LED Manufacturing  

Science Conference Proceedings (OSTI)

The objective of this activity was to address the need for improved manufacturing tools for LEDs. Improvements include lower cost (both capital equipment cost reductions and cost-ofownership reductions), better automation and better yields. To meet the DOE objective of $1- 2/kilolumen, it will be necessary to develop these highly automated manufacturing tools. Lithography is used extensively in the fabrication of high-brightness LEDs, but the tools used to date are not scalable to high-volume manufacturing. This activity addressed the LED lithography process. During R&D and low volume manufacturing, most LED companies use contact-printers. However, several industries have shown that these printers are incompatible with high volume manufacturing and the LED industry needs to evolve to projection steppers. The need for projection lithography tools for LED manufacturing is identified in the Solid State Lighting Manufacturing Roadmap Draft, June 2009. The Roadmap states that Projection tools are needed by 2011. This work will modify a stepper, originally designed for semiconductor manufacturing, for use in LED manufacturing. This work addresses improvements to yield, material handling, automation and throughput for LED manufacturing while reducing the capital equipment cost.

Andrew Hawryluk; Emily True

2012-06-30T23:59:59.000Z

156

Gas Turbine Manufacturers Perspective  

NLE Websites -- All DOE Office Websites (Extended Search)

Viability and Experience of IGCC From a Viability and Experience of IGCC From a Gas Turbine Manufacturers Perspective ASME - IGCC ASME - IGCC Turbo Turbo Expo Expo June 2001 June 2001 GE Power Systems g Klaus Brun, Ph.D. - Manager Process Power Plant Product & Market Development Robert M. Jones - Project Development Manager Process Power Plants Power Systems Power Systems General Electric Company General Electric Company ABSTRACT GE Power Systems g Economic Viability and Experience of IGCC From a Gas Turbine Manufacturers Perspective High natural gas fuel gas prices combined with new technology developments have made IGCC a competitive option when compared to conventional combined cycle or coal steam turbine cycles. Although the initial investment costs for an IGCC plant are still comparatively high, the low

157

Materials Standards for Additive Manufacturing  

Science Conference Proceedings (OSTI)

... ASTM F2924 Standard Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium with Powder Bed Fusion) except for standards ...

2013-06-04T23:59:59.000Z

158

Implementation of Sustainable Manufacturing Standards  

Science Conference Proceedings (OSTI)

... Manufacturing Standards Kathi Futornick, LEED AP Global Sustainability Practice URS Corporation NIST Workshop October 13-15, 2009 ...

2009-10-20T23:59:59.000Z

159

NIST Workshop on Sustainable Manufacturing  

Science Conference Proceedings (OSTI)

... Day1: 15:15 – 15:30. Kathi Futornick. URS Corporation. Standards Opportunity in Sustainable Product Development and Manufacturing. ...

2009-12-01T23:59:59.000Z

160

NIST Additive Manufacturing Test Artifact  

Science Conference Proceedings (OSTI)

NIST Additive Manufacturing Test Artifact. Summary. ... The test artifact is to be built using the AM system under investigation. ...

2013-04-26T23:59:59.000Z

Note: This page contains sample records for the topic "activity manufacturing agriculture" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Why Manufacturing Matters to California  

Science Conference Proceedings (OSTI)

... Sources: Bureau of Labor Statistics, IHS Global Insight. Manufacturing employment (left) ... Sources: Bureau of Labor Statistics, IHS Global Insight. ...

2012-10-01T23:59:59.000Z

162

Project: Manufacturing Services Network Models  

Science Conference Proceedings (OSTI)

... expressivity of a pattern library for manufacturing service capability information, by demonstrating the target information retrieval behavior enabled ...

2013-01-03T23:59:59.000Z

163

Integrating Materials and Manufacturing Innovation  

Science Conference Proceedings (OSTI)

Jun 13, 2012 ... 06/13 - TMS Launches New Open Access Journal: Integrating Materials and Manufacturing Innovation. Patti Dobranski Communication ...

164

Additive Manufacturing: Pursuing the Promise  

NLE Websites -- All DOE Office Websites (Extended Search)

capability have captured the imaginations of investors. Revolutionary Speed, Efficiency, Optimization Additive manufacturing has the potential to vastly accelerate innovation,...

165

Manufacturing Glossary - Energy Information Administration  

U.S. Energy Information Administration (EIA)

Propylene (C 3 H 6): A normally gaseous olefinic hydrocarbon recovered from refinery processes or petrochemical processes. In the manufacturing ...

166

Agriculture | OpenEI  

Open Energy Info (EERE)

Agriculture Agriculture Dataset Summary Description The Energy Statistics Database contains comprehensive energy statistics on the production, trade, conversion and final consumption of primary and secondary; conventional and non-conventional; and new and renewable sources of energy. The Energy Statistics dataset, covering the period from 1990 on, is available at UNdata. This dataset relates to the consumption of alcohol by the transportation industry. Source United Nations (UN) Date Released December 09th, 2009 (5 years ago) Date Updated Unknown Keywords Agriculture Alcohol consumption transportation industry UN Data application/xml icon UN Data: consumption by transportation industry XML (xml, 95 KiB) text/csv icon UN Data: consumption by transportation industry XLS (csv, 21.6 KiB)

167

Indian Agriculture and Foods  

NLE Websites -- All DOE Office Websites (Extended Search)

Agriculture and Foods Agriculture and Foods Nature Bulletin No. 387-A September 19, 1970 Forest Preserve District of Cook County George W. Dunne, President Roland F. Eisenbeis, Supt. of Conservation INDIAN AGRICULTURE AND FOODS Most of the Indian tribes east of the Great Plains were part-time farmers. Some of them cultivated sunflowers, giant ragweed, canary grass and pigweed for their seeds, which they used as food. Many grew tobacco. But corn, beans and squash -- wherever the climate permitted - - were the principal crops. There were several varieties of beans. They ate both the seeds and rinds of some dozens of kinds of squash and pumpkin. When game was not abundant there was a wealth of wild fruits, berries, and many kinds of wild plants with edible leaves, seeds, or roots. Corn, however, was the ' staff of life" and they depended on corn, beans and squash -- "the three sisters" -- for year-round food.

168

Out of Bounds Additive Manufacturing  

Science Conference Proceedings (OSTI)

Lockheed Martin and Oak Ridge National Laboratory are working on an additive manufacturing (AM) system capable of manufacturing components measured not in terms of inches or feet, but multiple yards in all dimensions with the potential to manufacture parts that are completely unbounded in size.

Holshouser, Chris [Lockheed Martin Corporation; Newell, Clint [Lockheed Martin Corporation; Palas, Sid [Lockheed Martin Corporation; Love, Lonnie J [ORNL; Kunc, Vlastimil [ORNL; Lind, Randall F [ORNL; Lloyd, Peter D [ORNL; Rowe, John C [ORNL; Blue, Craig A [ORNL; Duty, Chad E [ORNL; Peter, William H [ORNL; Dehoff, Ryan R [ORNL

2013-01-01T23:59:59.000Z

169

Mexico-EC-LEDS in the Agriculture Sector | Open Energy Information  

Open Energy Info (EERE)

Mexico-EC-LEDS in the Agriculture Sector Mexico-EC-LEDS in the Agriculture Sector Jump to: navigation, search Name Mexico-EC-LEDS in the Agriculture Sector Agency/Company /Organization United States Department of Agriculture, United States Department of State Partner Ministry of Agriculture, Ministry of Environment Sector Climate, Land Focus Area Agriculture, Economic Development, Greenhouse Gas, Land Use Topics Adaptation, Implementation, Low emission development planning, -LEDS, Policies/deployment programs Program Start 2011 Program End 2013 Country Mexico Central America References Land Use Assessment Toolkit - Agriculture Resources[1] Overview Progress and Outcomes Capacity building activities include strengthening implementation of climate change policies, development of climate change policies, and

170

Environmental, Health and Safety Assessment: ATS 7H Program (Phase 3R) Test Activities at the GE Power Systems Gas Turbine Manufacturing Facility, Greenville, SC  

Science Conference Proceedings (OSTI)

International Technology Corporation (IT) was contracted by General Electric Company (GE) to assist in the preparation of an Environmental, Health and Safety (HI&3) assessment of the implementation of Phase 3R of the Advanced Turbine System (ATS) 7H program at the GE Gas Turbines facility located in Greenville, South Carolina. The assessment was prepared in accordance with GE's contractual agreement with the U.S. Department of Energy (GE/DOE Cooperative Agreement DE-FC21-95MC3 1176) and supports compliance with the requirements of the National Environmental Policy Act of 1970. This report provides a summary of the EH&S review and includes the following: General description of current site operations and EH&S status, Description of proposed ATS 7H-related activities and discussion of the resulting environmental, health, safety and other impacts to the site and surrounding area. Listing of permits and/or licenses required to comply with federal, state and local regulations for proposed 7H-related activities. Assessment of adequacy of current and required permits, licenses, programs and/or plans.

None

1998-11-17T23:59:59.000Z

171

Additive manufacturing capabilities expanding | ornl.gov  

NLE Websites -- All DOE Office Websites (Extended Search)

Additive manufacturing capabilities expanding January 01, 2013 Large-scale polymer additive manufacturing equipment located at the Manufacturing Demonstration Facility. Additive...

172

EERE: Clean Energy Manufacturing Initiative Home Page  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Energy Manufacturing Initiative Search Search Help Clean Energy Manufacturing Initiative EERE Clean Energy Manufacturing Initiative Printable Version Share this resource Send a...

173

Energy Use in Manufacturing ? 1998 to 2002  

U.S. Energy Information Administration (EIA) Indexed Site

Use in Manufacturing - 1998 to 2002 Energy Use in Manufacturing provides information related to energy consumption changes within the U.S. manufacturing sector between 1998 and...

174

Manufacturing Science and Technology: Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

Welding, Fabrication, & Metal Forming Welding, Fabrication, & Metal Forming PDF format (159 kb) The department consists of three trades: welding; fabrication and assembly; and precision metal forming. These interrelated groups use similar equipment and rely on each other's skills. One stop will get you the service of three reliable trades. The team manufactures and assembles prototype hardware and has the in-house capability of producing hardware with sizes ranging from thumbnail to rail-car. Expertise includes aircraft quality sheet metal construction, certified welding, and assembly. The staff has experience managing a variety of activities: design modification assistance; in-house fabrication; and project management and can work with your engineers to transform sketches and ideas into working prototypes.

175

Manufacturing Science and Technology: Organizations  

NLE Websites -- All DOE Office Websites (Extended Search)

Machining Operations Machining Operations Machining Services Electronic Fabrication Manufacturing Process Science & Technology Thin Film, Vacuum, & Packaging Organic Materials Ceramic & Glass Meso Manufacturing & Systems Development Visiting Us AMTTP Center Organizational chart Organizations Our Business areas Manufacturing Science and Technology David Plummer, Director Manufacturing Enterprise Joe M. Harris, Senior Manager Machining Operations Mathew Donnelly, Manager Machining Services Daryl Reckaway, Acting Manager Electronic Fabrication Phillip L. Gallegos, Manager Manufacturing Process Science and Technology Mark F. Smith, Senior Manager Thin Film, Vacuum, and Packaging Mark F. Smith, Acting Manager Organic Materials Mike Kelly, Manager Ceramic and Glass Alex Roesler, Manager

176

PV Manufacturing R&D Accomplishments and Status  

DOE Green Energy (OSTI)

The U.S. Department of Energy (DOE) PV Manufacturing Research and Development Project has worked for 11 years in partnership with the U.S. photovoltaic industry to reduce manufacturing costs while significantly scaling up production capacity. Over this period, the PV Manufacturing R&D Project has issued seven solicitations for partnerships that have resulted in over 50 cost-shared R&D subcontracts that addressed the cost and capacity goals of the Project, including 10 that are currently active. The previous and current contracts have typically focused on addressing Project goals in one of two areas: module manufacturing and balance-of-systems (BOS)/systems work. The majority of the DOE investment has been targeted toward module manufacturing. The partnerships have resulted in a significant and measurable increase in PV module/systems production capacity, a decrease in PV manufacturing costs, and a subsequent return on the joint public and private investments facilitated by the Project.

Mooney, D.; Mitchell, R.; Witt, E.; King, R.; Ruby, D.

2003-11-01T23:59:59.000Z

177

Advanced Manufacturing Office: Motor Systems  

NLE Websites -- All DOE Office Websites (Extended Search)

Motor Systems to Motor Systems to someone by E-mail Share Advanced Manufacturing Office: Motor Systems on Facebook Tweet about Advanced Manufacturing Office: Motor Systems on Twitter Bookmark Advanced Manufacturing Office: Motor Systems on Google Bookmark Advanced Manufacturing Office: Motor Systems on Delicious Rank Advanced Manufacturing Office: Motor Systems on Digg Find More places to share Advanced Manufacturing Office: Motor Systems on AddThis.com... Quick Links Energy Resource Center Technical Publications by Energy System Energy-Efficient Technologies Incentives & Resources by Zip Code Better Plants Superior Energy Performance Contacts Motor Systems Photo of Man Checking Motor Performance Motor-driven equipment accounts for 54% of manufacturing electricity use. Dramatic energy and cost savings can be achieved in motor systems by

178

Revolutionizing Manufacturing | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Revolutionizing Manufacturing Revolutionizing Manufacturing Revolutionizing Manufacturing Addthis Saving Energy and Resources 1 of 4 Saving Energy and Resources Thanks to additive manufacturing technology, Oak Ridge National Laboratory was able to fabricate a robotic hand with less energy use and material waste. The novel, lightweight, low-cost fluid powered hand was selected for a 2012 R&D 100 award. | Photo courtesy of Oak Ridge National Laboratory. Partnering with Industry 2 of 4 Partnering with Industry The Energy Department's Manufacturing Demonstration Facility at Oak Ridge National Laboratory includes an array of state-of-the-art additive manufacturing capabilities, allowing researchers and industry to develop innovative manufacturing solutions. | Photo courtesy of Oak Ridge National

179

Manufacturing Consumption of Energy 1994  

U.S. Energy Information Administration (EIA) Indexed Site

Manufacturing Manufacturing Sector Overview 1991-1994 Energy Information Administration/Manufacturing Consumption of Energy 1994 xiii Why Do We Investigate Energy Use in the Manufacturing Sector? What Data Do EIA Use To Investigate Energy Use in the Manufacturing Sector? In 1991, output in the manufactur- ing sector fell as the country went into a recession. After 1991, however, output increased as the country slowly came out of the recession. Between 1991 and 1994, manufacturers, especially manu- facturers of durable goods such as steel and glass, experienced strong growth. The industrial production index for durable goods during the period increased by 21 percent. Real gross domestic product for durable goods increased a corre- sponding 16 percent. The growth of nondurables was not as strong-- the production index increased by only 9 percent during this time period.

180

Agriculture: Tendencies & Deficiencies  

E-Print Network (OSTI)

Agriculture: Tendencies & Deficiencies Tad Patzek, Petroleum & Geosystems Engineering, UT Austin of Conclusions, cntd. The main energy crops I have looked at are maize, sugarcane, soybeans, and oil palms are witnessing a global move away from food to energy crops. Diverting more land to pure energy crops

Patzek, Tadeusz W.

Note: This page contains sample records for the topic "activity manufacturing agriculture" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Action Plan Agricultural Sciences  

E-Print Network (OSTI)

lines, and becoming an international benchmark in some of them. Incentives will be given to those (elimination of wastes genera- ted by society, decontamination of soils, clean agriculture, etc change, energy or water). Institutes and Centres that comprise the Area The Area comprises a total of 17

Fitze, Patrick

182

Science Activities in Biomass  

NLE Websites -- All DOE Office Websites (Extended Search)

Activities in Biomass Curriculum: Biomass Power (organic chemistry, genetics, distillation, agriculture, chemicalcarbon cycles, climatology, plants and energy resources...

183

Agricultural Microscopy Newsletter March 11  

Science Conference Proceedings (OSTI)

AOCS Agricultural Microscopy Division Newsletter March 2011 Greetings from the Chairperson The Agricultural Microscopy Division would like to take this opportunity to express our sincere sympathy to the family and friends of George Liepa who rece

184

EL Program: Systems Integration for Manufacturing and ...  

Science Conference Proceedings (OSTI)

... Strategic Goal: Smart Manufacturing, Construction, and Cyber-Physical Systems ... changing manufacturing by enabling a transformation to digitized ...

2013-01-03T23:59:59.000Z

185

Renewable Energy Equipment Manufacturer Tax Credit | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Manufacturer Tax Credit Renewable Energy Equipment Manufacturer Tax Credit Eligibility Commercial Industrial Savings For Bioenergy Biofuels Alternative Fuel Vehicles Commercial...

186

Autogenic Pressure Reactions for Battery Materials Manufacture...  

NLE Websites -- All DOE Office Websites (Extended Search)

Autogenic Pressure Reactions for Battery Materials Manufacture Technology available for licensing: A unique method for anode and cathode manufacture autogenicpressurereactions...

187

NIST Sustainable Manufacturing Indicators Repository (SMIR)  

Science Conference Proceedings (OSTI)

... manufacturing strongly influence a product's life cycle impacts on the environment and the company's sustainability. Sustainable manufacturing ...

188

Energy Efficiency Standards for Manufactured Housing | Building...  

NLE Websites -- All DOE Office Websites (Extended Search)

Regulations Determinations Federal Buildings Manufactured Housing Resource Center Energy Efficiency Standards for Manufactured Housing Section 413 of the Energy...

189

Advanced Technology Vehicles Manufacturing Incentive Program...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Technology Vehicles Manufacturing Incentive Program Advanced Technology Vehicles Manufacturing Incentive Program A fact sheet detailling the advanced technology vehicles...

190

Reclaiming Fibrous Material in Manufacturing Processes  

Science Conference Proceedings (OSTI)

Abstract Scope, In the manufacture of faced fiberglass insulation, defects may ... There are approximately 29 fiberglass insulation manufacturing plants across ...

191

Microstructure and Properties and Manufacturing Technologies  

Science Conference Proceedings (OSTI)

Oct 29, 2013 ... Advances in Hydroelectric Turbine Manufacturing and Repair: Microstructure and Properties and Manufacturing Technologies Sponsored by: ...

192

Agricultural Microscopy Division Newsletter September 2013  

Science Conference Proceedings (OSTI)

Read the latest news from the Agricultural Microscopy division. Agricultural Microscopy Division Newsletter September 2013 Agricultural Microscopy Division Newsletter September 2013 ...

193

Wind energy applications in agriculture  

DOE Green Energy (OSTI)

Separate abstract are included for each of the papers presented concerning the use of wind turbines in agriculture.

Kluter, H.H.; Soderholm, L.H. (eds.)

1979-01-01T23:59:59.000Z

194

Steam Champions in Manufacturing  

E-Print Network (OSTI)

Traditionally, industrial steam system management has focused on operations and maintenance. Competitive pressures, technology evolution, and increasingly complex regulations provide additional management challenges. The practice of operating a steam system demands the managerial expertise of a "Steam Champion," which will be described in this paper. Briefly, the steam champion is a facility professional who embodies the skills, leadership, and vision needed to maximize the effectiveness of a plant's steam system. Perhaps more importantly, the steam champion's definitive role is that of liaison between the manufacturer's boardroom and the plant floor. As such, the champion is able to translate the functional impacts of steam optimization into equivalent corporate rewards, such as increased profitability, reliability, workplace safety, and other benefits. The prerequisites for becoming a true steam champion will include engineering, business, and management skills.

Russell, C.

2001-05-01T23:59:59.000Z

195

Center for Innovation-based Manufacturing An ICTAS Center  

E-Print Network (OSTI)

such as renewable energies, micro- and nano-manufacturing, medical devices, etc. CIbM is actively working for admission or employment on the basis of race, gender, disability, age, veteran status, national origin

Beex, A. A. "Louis"

196

Assessing the drivers of regional trends in solar photovoltaic manufacturing  

E-Print Network (OSTI)

The photovoltaic (PV) industry has grown rapidly as a source of energy and economic activity. Since 2008, the average manufacturer-sale price of PV modules has declined by over a factor of two, coinciding with a significant ...

Goodrich, Alan C.

197

Manufacturing consumption of energy 1991  

SciTech Connect

This report provides estimates on energy consumption in the manufacturing sector of the US economy. These estimates are based on data from the 1991 Manufacturing Energy Consumption Survey (MECS). This survey--administered by the Energy End Use and Integrated Statistics Division, Office of Energy Markets and End Use, Energy Information Administration (EIA)--is the most comprehensive source of national-level data on energy-related information for the manufacturing industries.

1994-12-01T23:59:59.000Z

198

Manufacturing Consumption of Energy 1991  

U.S. Energy Information Administration (EIA) Indexed Site

at the extent to which manufacturers exercised their ability to choose the mix of energy sources at their discretion. Nonswitchable Minimum Requirements Generally, a...

199

Manufacturing — Its Evolution and Future  

E-Print Network (OSTI)

of the Computer Integrated Manufacturing (CIM) System.CIM’s potential capability to integrate former “bits andto develop and implement CIM system technology and reap its

Merchant, M. Eugene; Dornfeld, David; Wright, Paul K

2005-01-01T23:59:59.000Z

200

NIST SBIR Manufacturing Related Emphasis  

Science Conference Proceedings (OSTI)

... the mission of that department or agency, to give high priority within the SBIR programs to manufacturing-related research and development (R&D). ...

2012-09-11T23:59:59.000Z

Note: This page contains sample records for the topic "activity manufacturing agriculture" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Implications for the Manufacturing Industry  

Science Conference Proceedings (OSTI)

Plus, Quality and Response Time are Competitive. In Summary, China has ... Significant offshore demand and manufacturing base established by American and ...

202

Manufacturing Consumption of Energy 1991  

U.S. Energy Information Administration (EIA) Indexed Site

includes descriptions of the 30 groups that comprise the strata of the Manufacturing Energy Consumption Survey. These are the 20 major industrial groups (two-digit SIC) and...

203

Advanced Manufacturing Office: Closed Solicitations  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Production EE-2E 08112008 09192008 Manufacturing- Industrial Distributed Energy FuelFeedstock Flexibility and Combined Heat and Power U.S. Department of Energy- Industrial...

204

Manufacturing Science and Technology: Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

Courtesy of ZCorp The Rapid Prototyping Laboratory (RPL) supports internal design, manufacturing, and process development with three rapid prototyping (RP) technologies:...

205

Advanced Manufacturing Office: Information Resources  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

incentives, tools, and training to help companies of all sizes identify energy saving projects and chart a path toward continuous energy improvement. Advanced Manufacturing...

206

Advanced Manufacturing Office: Financial Opportunities  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

organizations offer ways to help manufacturers identify and implement energy-saving projects at their plants. Search the State Incentives and Resource Database to find rebates,...

207

Manufacturing Consumption of Energy 1991  

U.S. Energy Information Administration (EIA) Indexed Site

B Survey Design, Implementation, and Estimates Introduction The 1991 Manufacturing Energy Consumption Survey (MECS) has been designed by the Energy Information Administration...

208

Manufacturing Consumption of Energy 1991  

U.S. Energy Information Administration (EIA) Indexed Site

J Related EIA Publications on Energy Consumption Energy Information AdministrationManufacturing Consumption of Energy 1991 526 Appendix J Related EIA Publications on Energy...

209

Wireless technology for integrated manufacturing  

SciTech Connect

This paper describes the ground breaking work in Oak Ridge facilities that now leads us to the brink of the wireless revolution in manufacturing. The focus is on solving tough technological problems necessary for success and addressing the critical issues of throughput, security, reliability, and robustness in applying wireless technology to manufacturing processes. Innovative solutions to these problems are highlighted through detailed designs and testbed implementations that demonstrate key concepts. The DOE-Oak Ridge complex represented by the Oak Ridge Centers for Manufacturing Technologies (ORCMT) continues to develop these technologies and will continue to focus on solving tough manufacturing problems.

Manges, W.W.; Allgood, G.O.; Shourbaji, A.A.

1996-08-01T23:59:59.000Z

210

Manufacturing Consumption of Energy 1994  

U.S. Energy Information Administration (EIA) Indexed Site

Energy Information AdministrationManufacturing Consumption of Energy 1994 Introduction The market for natural gas has been changing for quite some time. As part of natural gas...

211

Manufacturing Consumption of Energy 1994  

U.S. Energy Information Administration (EIA) Indexed Site

Detailed Tables 28 Energy Information AdministrationManufacturing Consumption of Energy 1994 1. In previous MECS, the term "primary energy" was used to denote the "first use" of...

212

MDF | Manufacturing Demonstration Facility | ORNL  

NLE Websites -- All DOE Office Websites (Extended Search)

BTRIC CNMS CSMB CFTF HFIR MDF Working with MDF NTRC OLCF SNS Titanium robotic hand holding sphere fabricated using additive manufacturing Home | User Facilities | MDF MDF |...

213

Solar and Wind Manufacturing Incentive  

Energy.gov (U.S. Department of Energy (DOE))

Manufacturers of solar or wind equipment or components in Kansas may be eligible for financing through the Kansas Department of Commerce to support research, development, engineering or...

214

Smart Manufacturing Processes and Equipment  

Science Conference Proceedings (OSTI)

... on testing machine tool capability for batch production (ISO 26303 ... NC Manufacturing Group (KTH, Step Tools, Sandvik, GE Energy, University of ...

2013-01-02T23:59:59.000Z

215

MANUFACTURING NIST Impact Verification Program  

Science Conference Proceedings (OSTI)

... manufactured from structural steel such as oil and gas ... both in the US and around the world. ... of proficiency test data available for production lots.

2013-01-30T23:59:59.000Z

216

Cost Methodology for Biomass Feedstocks: Herbaceous Crops and Agricultural Residues  

DOE Green Energy (OSTI)

This report describes a set of procedures and assumptions used to estimate production and logistics costs of bioenergy feedstocks from herbaceous crops and agricultural residues. The engineering-economic analysis discussed here is based on methodologies developed by the American Society of Agricultural and Biological Engineers (ASABE) and the American Agricultural Economics Association (AAEA). An engineering-economic analysis approach was chosen due to lack of historical cost data for bioenergy feedstocks. Instead, costs are calculated using assumptions for equipment performance, input prices, and yield data derived from equipment manufacturers, research literature, and/or standards. Cost estimates account for fixed and variable costs. Several examples of this costing methodology used to estimate feedstock logistics costs are included at the end of this report.

Turhollow Jr, Anthony F [ORNL; Webb, Erin [ORNL; Sokhansanj, Shahabaddine [ORNL

2009-12-01T23:59:59.000Z

217

Climate VISION: Private Sector Initiatives: Automobile Manufacturers:  

Office of Scientific and Technical Information (OSTI)

Federal/State Programs Federal/State Programs ENERGY STAR Focus for Automobile Manufacturing The U.S. automobile manufacturers and EPA have worked together to jointly develop a Focus on energy efficiency within the industry. Participating companies work with EPA to institute or improve their corporate energy management programs and the energy performance of their operations. Through ENERGY STAR, EPA provides tools to gauge plant and program energy performance, a forum for elevating energy management in the industry, and recognition for superior energy achievements. See all Federal/State Programs DOE State Activities For information on activities, financial assistance, and solicitations within your state, please refer to the DOE Office of Energy Efficiency and Renewable Energy State Specific Information website.

218

Composites Manufacturing Technologies:  

Science Conference Proceedings (OSTI)

... With the proliferation of electronic devices in ... An active product development and testing program ... and to reduce rolling resistance, silica additives ...

2004-07-13T23:59:59.000Z

219

Kenya-EC-LEDS in the Agriculture Sector | Open Energy Information  

Open Energy Info (EERE)

Page Page Edit with form History Facebook icon Twitter icon » Kenya-EC-LEDS in the Agriculture Sector Jump to: navigation, search Name Kenya-EC-LEDS in the Agriculture Sector Agency/Company /Organization United States Department of Agriculture, United States Department of State Partner Ministry of Agriculture, Ministry of Environment Sector Climate, Land Focus Area Agriculture, Economic Development, Greenhouse Gas, Land Use Topics Adaptation, Implementation, Low emission development planning, -LEDS, Policies/deployment programs Program Start 2011 Program End 2013 Country Kenya Eastern Africa References Land Use Assessment Toolkit - Agriculture Resources[1] Overview Progress and Outcomes Capacity building activities include strengthening implementation of

220

Barron Electric Cooperative - Commercial, Industrial, and Agricultural...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Industrial, and Agricultural Energy Efficiency Rebate Program Barron Electric Cooperative - Commercial, Industrial, and Agricultural Energy Efficiency Rebate Program...

Note: This page contains sample records for the topic "activity manufacturing agriculture" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Manufacturing Blog | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Manufacturing Manufacturing Blog Manufacturing Blog RSS January 15, 2014 Next-Generation Power Electronics: Reducing Energy Waste and Powering the Future From unleashing more powerful and energy-efficient laptops, cell phones and motors, to shrinking utility-scale inverters from 8,000 pound substations to the size of a suitcase, wide bandgap semiconductors could be one of the keys to our clean energy future. January 6, 2014 Manufacturing Spotlight: Boosting American Competitiveness Find out how the Energy Department is helping bring new clean energy technologies to the marketplace and make manufacturing processes more energy efficient. November 15, 2013 Secretary Moniz Joins President Obama in Visit to Cleveland High-Strength Steel Factory Secretary Moniz and President Obama toured a high-strength steel plant in

222

Advanced Manufacturing | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Advanced Manufacturing Advanced Manufacturing Advanced Manufacturing EERE leads a robust network of researchers and other partners to continually develop cost-effective energy-saving solutions that help make our country run better through increased efficiency — promoting better plants, manufacturing processes, and products; more efficient new homes and improved older homes; and other solutions to enhance the buildings in which we work, shop, and lead our everyday lives. EERE leads a robust network of researchers and other partners to continually develop cost-effective energy-saving solutions that help make our country run better through increased efficiency - promoting better plants, manufacturing processes, and products; more efficient new homes and improved older homes; and other solutions to enhance the buildings in which

223

Manufacturing Data | Data.gov  

NLE Websites -- All DOE Office Websites (Extended Search)

Data Data Manufacturing Data/Tools Research/Tech Services Apps Challenges Blogs Let's Talk Manufacturing You are here Data.gov » Communities » Manufacturing Manufacturing Data These Federal datasets contain a wealth of information for manufacturing - either from information in a single dataset or by combining data from more than one place. This site will be enhanced with the addition of new datasets, and new apps using these datasets, as they are developed. Search Terms Category -Any- Geospatial Items per page 25 50 100 Apply Name Downloads Rating TradeStats Express TradeStats Express provides statistics on U.S. merchandise trade at the national and state levels. Data can also be displayed in maps, graphs, tables, or as exports, imports, and trade balances.... Data Extraction

224

Manufacturing Fuel Cell Manhattan Project  

NLE Websites -- All DOE Office Websites (Extended Search)

to to DOE Fuel Cell Manufacturing Workshop 2011 John Christensen, PE NREL Consultant DOE Fuel Cell Market Transformation Support August 11, 2011 Manufacturing Fuel Cell Manhattan Project √ Identify manufacturing cost drivers to achieve affordability √ Identify best practices in fuel cell manufacturing technology √ Identify manufacturing technology gaps √ Identify FC projects to address these gaps MFCMP Objectives Completed Final Report due out Nov 2010 B2PCOE Montana Tech SME's Industry Academia Government FC Consortiums Power ranges * <0.5 kW (man portable / man wearable) * 0.5 kW< Power range < 10 kW (mobile power) Fuels: Hydrogen and reformed hydrocarbons *Packaged Fuels < 0.5 kW * Near term solution * Move through the supply chain like batteries

225

Air cathode structure manufacture  

DOE Patents (OSTI)

An improved air cathode structure for use in primary batteries and the like. The cathode structure includes a matrix active layer, a current collector grid on one face of the matrix active layer, and a porous, nonelectrically conductive separator on the opposite face of the matrix active layer, the collector grid and separator being permanently bonded to the matrix active layer. The separator has a preselected porosity providing low IR losses and high resistance to air flow through the matrix active layer to maintain high bubble pressure during operation of the battery. In the illustrated embodiment, the separator was formed of porous polypropylene. A thin hydrophobic film is provided, in the preferred embodiment, on the current collecting metal grid.

Momyer, William R. (Palo Alto, CA); Littauer, Ernest L. (Los Altos Hills, CA)

1985-01-01T23:59:59.000Z

226

Manufacturing for the Hydrogen Economy Manufacturing Research & Development  

E-Print Network (OSTI)

-volume production, and to direct future public-private partnerships that will facilitate transfer of technology will identify and prioritize topics for public-private R&D on manufacturing of PEM fuel cells. Fuel Cell System

227

California Agriculture: Dimensions and Issues  

E-Print Network (OSTI)

Agriculture 1959. California, Vol. 1, Part 48. ----------.of Population, California, Vol. 1, Part 6. ----------. 1990Vol. 12, No. 67, 1888. California Committee to Survey the

Siebert,, Jerome Editor

2003-01-01T23:59:59.000Z

228

The California Seed Industry: A Measure of Economic Activity and  

E-Print Network (OSTI)

The California Seed Industry: A Measure of Economic Activity and Contribution to California Agriculture William A. Matthews* University of California Agricultural Issues Center of California Agricultural Issues Center. #12; The California Seed Industry: A Measure of Economic Activity

Hammock, Bruce D.

229

MST: Organizations: Precision Meso Manufacturing  

NLE Websites -- All DOE Office Websites (Extended Search)

Precision Meso Manufacturing Precision Meso Manufacturing Many engineers and product realization teams at Sandia National Laboratories are currently engaged in efforts to create revolutionary national security products that feature unprecedented functionality in ever-smaller, more portable configurations. In the course of development, the Sandia technology community has realized the need for manufacturing capabilities that expand upon what traditional microfabrication provides. The term “meso,” derived from the Greek mesos, meaning “intermediate” or “in the middle,” describes operations on a length scale that typically ranges from hundreds of micrometers to one centimeter. Meso Manufacturing involves a suite of innovative fabrication and metrology tools that compliment each other to make these products a reality. The Meso

230

Manufacturing Consumption of Energy 1994  

U.S. Energy Information Administration (EIA) Indexed Site

Survey Design, Survey Design, Implementation, and Estimates 411 Energy Information Administration/Manufacturing Consumption of Energy 1994 Overview of Changes from Previous Surveys Sample Design. The MECS has increased its sample size by roughly 40 percent since the 1991 survey, increasing the designed sample size from 16,054 establishments to 22,922. This increase in size and change in sampling criteria required a departure from using the Annual Survey of Manufactures (ASM) as the MECS sampling frame. For 1994, establishments were selected directly from the 1992 Census of Manufactures (CM) mail file, updated by 1993 ASM. Sample Frame Coverage. The coverage in the 1994 MECS is 98 percent of the manufacturing population as measured in total payroll. The sampling process itself provided that level of coverage, and no special adjustments were

231

Manufacturing Energy and Carbon Footprints  

E-Print Network (OSTI)

Significant opportunities exist for improving energy efficiency in U.S. manufacturing. A first step in realizing these opportunities is to identify how industry is using energy. Where does it come from? What form is it in? Where is it used? How much is lost? Answering these questions is the focus of this paper and the analysis described herein. Manufacturing energy and carbon footprints map energy consumption and losses, as well as greenhouse gas emissions, for the fifteen most energy intensive manufacturing sectors, and for the entire U.S. manufacturing sector. Analysts and decision-makers utilize the footprints to better understand the distribution of energy use in energy-intensive industries and the accompanying energy losses. The footprints provide a benchmark from which to calculate the benefits of improving energy efficiency and for prioritizing opportunity analysis. A breakdown of energy consumption by energy type and end use allows for comparison both within and across sectors.

Brueske, S.; Lorenz, T.

2012-01-01T23:59:59.000Z

232

Manufacturing means jobs ? Mike Arms  

NLE Websites -- All DOE Office Websites (Extended Search)

investment in manufacturing since it was a sector generating not only high-paying direct jobs but also outstanding secondary jobs in supply-chain support and other related...

233

Manufacturing System Design Framework Manual  

E-Print Network (OSTI)

Previous Lean Aerospace Initiative research in factory operations had indicated that the greatest performance gains are realized when the manufacturing system is designed from the top down and from supplier to the customer. ...

Vaughn, Amanda

2002-01-01T23:59:59.000Z

234

Manufacturing Consumption of Energy 1994  

U.S. Energy Information Administration (EIA) Indexed Site

S Y M n i 1 y 2 i (W i ) (W i 1) , Energy Information Administration, Manufacturing Energy Consumption Survey: Methodological Report 1985. Although this report describes 44...

235

Manufacturing Laboratory (Fact Sheet), NREL (National Renewable...  

NLE Websites -- All DOE Office Websites (Extended Search)

303-275-4311 Manufacturing Laboratory The Manufacturing Laboratory at NREL's Energy Systems Integration Facility (ESIF) focuses on developing methods and technologies that will...

236

2011 Next Generation Manufacturing Study 2011 Next ...  

Science Conference Proceedings (OSTI)

... well: 28% of manufacturers reported they were ... The NGM Study manufacturers report annual revenues ... 0.7% 0.5% Petroleum and Coal Products Mfg ...

237

NIST Workshop Seeks Manufacturers' Ideas on Using ...  

Science Conference Proceedings (OSTI)

... Workshop Seeks Manufacturers' Ideas on Using Multipurpose Robots. ... and where robots are used in manufacturing ... might make the best use of these ...

2013-05-15T23:59:59.000Z

238

Additive Manufacturing Cluster Strategy | ornl.gov  

NLE Websites -- All DOE Office Websites (Extended Search)

Additive Manufacturing Cluster Strategy SHARE Additive Manufacturing Cluster Strategy As the nation's premier research laboratory, ORNL is one of the world's most capable resources...

239

2012 Near Net Shape Manufacturing Workshop: Registration  

Science Conference Proceedings (OSTI)

Tours of the Quad City Manufacturing and Additive Laboratories and Rock Island Arsenal – Joint Manufacturing and Technology Center (JMTC) Date: Thursday ...

240

Advanced Manufacturing Office: State and Regional Partnerships  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Since 2002: EIA April 10, 2013 23.5 Million Investment in Innovative Manufacturing Projects Supports the New Clean Energy Manufacturing Initiative March 26, 2013 More News...

Note: This page contains sample records for the topic "activity manufacturing agriculture" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Remarks at the Massachusetts Advanced Manufacturing ...  

Science Conference Proceedings (OSTI)

... After a decade of losses, more than half a ... to establish a National Network for Manufacturing ... on "Next Generation Power Electronics Manufacturing ...

2013-07-09T23:59:59.000Z

242

American Wind Manufacturing | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Field Sites Power Marketing Administration Other Agencies You are here Home American Wind Manufacturing American Wind Manufacturing Addthis 1 of 9 Nordex USA -- a global...

243

China's Industrial Carbon Dioxide Emissions in Manufacturing...  

NLE Websites -- All DOE Office Websites (Extended Search)

China's Industrial Carbon Dioxide Emissions in Manufacturing Subsectors and in Selected Provinces Title China's Industrial Carbon Dioxide Emissions in Manufacturing Subsectors and...

244

Advanced Manufacturing Office: NewsDetail  

NLE Websites -- All DOE Office Websites (Extended Search)

Office: NewsDetail on Twitter Bookmark Advanced Manufacturing Office: NewsDetail on Google Bookmark Advanced Manufacturing Office: NewsDetail on Delicious Rank Advanced...

245

Advanced Manufacturing Office: MotorMaster+ International  

NLE Websites -- All DOE Office Websites (Extended Search)

on Twitter Bookmark Advanced Manufacturing Office: MotorMaster+ International on Google Bookmark Advanced Manufacturing Office: MotorMaster+ International on Delicious Rank...

246

Fact Sheet: 48C Manufacturing Tax Credits  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Fact Sheet: 48C Manufacturing Tax Credits In order to foster investment and job creation in clean energy manufacturing, the American Recovery and Reinvestment Act of 2009 included...

247

Advanced Technology Vehicles Manufacturing Incentive Program...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Advanced Technology Vehicles Manufacturing Incentive Program Advanced Technology Vehicles Manufacturing Incentive Program This is an interim final rule that establishes the...

248

Bio Solutions Manufacturing Inc | Open Energy Information  

Open Energy Info (EERE)

search Name Bio Solutions Manufacturing Inc Place Las Vegas, Nevada Zip 89103 Product Waste-to-energy bioremediation developer. References Bio Solutions Manufacturing Inc1...

249

2012 Near Net Shape Manufacturing Workshop: Home  

Science Conference Proceedings (OSTI)

2012 Near Net Shape Manufacturing Workshop April 11-13, 2012, iWireless Center, Moline, Illinois • USA. The 2012 Near Net Shape Manufacturing Workshop ...

250

High Performance Windows Volume Purchase: For Manufacturers  

NLE Websites -- All DOE Office Websites (Extended Search)

For Manufacturers to someone by E-mail Share High Performance Windows Volume Purchase: For Manufacturers on Facebook Tweet about High Performance Windows Volume Purchase: For...

251

Electric Vehicle Manufacturing in Southern California: Current Developments, Future Prospects  

E-Print Network (OSTI)

Planning. UCLA. Motor Vehicles Manufacturers’ Association (Authority MVMA Motor Vehicle Manufacturer’s AssoemUon NaSneedsof electric vehicle manufacturers. Thesesectors include

Scott, Allen J.

1993-01-01T23:59:59.000Z

252

Silicon Film[trademark] photovoltaic manufacturing technology  

DOE Green Energy (OSTI)

This report describes work on a project to develop an advanced low-cost manufacturing process for a new utility-scale flatplate module based on thin active layers of polycrystalline silicon on a low-cost substrate. This is called the Silicon-Film[trademark] process. This new power module is based on a new large solar cell that is 675 cm[sup 2] in area. Eighteen of these solar cells form a 170-W module. Twelve ofthese modules form a 2-kW array. The program has three components: (1) development of a Silicon-Film[trademark] wafer machine that can manufacture wafer 675 cm[sup 2] in size with a total product cost reductionof 70%; (2) development of an advanced solar cell manufacturing process that will turn the Silicon-Film[trademark] wafer into a 14%-efficient solar cell; and (3) development of an advanced module design based on these large-area, efficient silicon solar cells with an average power of 170 watts. The completion of these three tasks will lead to a new power module designed for utility and other power applications with asubstantially lower cost.

Bottenberg, W.R.; Hall, R.B.; Jackson, E.L.; Lampo, S.; Mulligan, W.E.; Barnett, A.M. (AstroPower, Inc., Newark, DE (United States))

1993-04-01T23:59:59.000Z

253

Clean Energy Manufacturing Initiative | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Clean Energy Manufacturing Initiative Clean Energy Manufacturing Initiative Clean Energy Manufacturing Initiative July 10, 2013 - 1:52pm Addthis Boosting U.S. competitiveness in clean energy manufacturing Boosting U.S. competitiveness in clean energy manufacturing The Clean Energy Manufacturing Initiative is a strategic integration and commitment of manufacturing efforts across the Office of Energy Efficiency & Renewable Energy's (EERE) clean energy technology offices and Advanced Manufacturing Office, focusing on American competitiveness in clean energy manufacturing. alex was here Addthis Related Articles Manufacturing is the bedrock of the American economy, representing nearly 12 percent of our gross domestic product and providing good, high-paying jobs for middle class families. That's why the Energy Department is working to boost U.S. manufacturing competitiveness. | Photo courtesy of Alcoa.

254

Solar Photovoltaics for Sustainable Agriculture and  

E-Print Network (OSTI)

Solar photovoltaic (PV) systems have shown their potential in rural electrification projects around the world, especially concerning Solar Home Systems. With continuing price decreases of PV systems, other applications are becoming economically attractive and growing experience is gained with the use of PV in such areas as social and communal services, agriculture and other productive activities, which can have a significant impact on rural development. There is still a lack of information, however, on the potential and limitations of such PV applications. The main aim of this study is, therefore, to contribute to a better understanding of the potential impact and of the limitations of PV systems on sustainable agriculture and rural development (SARD), especially concerning income-generating activities. It is, in fact, of paramount importance to identify the potential contribution of PV to rural development in order to gain further financial and political commitment for PV projects and programmes and to design appropriate PV projects. One of the main lessons learnt through this study is that success of PV programmes is significantly enhanced when an integrated strategy is followed. Solar photovoltaic systems, through their flexibility in use, offer unique chances for the energy sector to provide “packages ” of energy services to remote rural areas such as for rural health care, education, communication, agriculture, lighting and water supply. It is hoped that this document contributes to the generation of ideas and discussions among the different institutions involved in providing these services to rural areas and thereby to an "informed " decision on the PV technology option.

B. Van Campen; D. Guidi; G. Best

2000-01-01T23:59:59.000Z

255

PEM Stack Manufacturing: Industry Status  

NLE Websites -- All DOE Office Websites (Extended Search)

© 2009 BALLARD POWER SYSTEMS INC. ALL RIGHTS RESERVED © 2009 BALLARD POWER SYSTEMS INC. ALL RIGHTS RESERVED JULY 2009 B U I L D I N G A C L E A N E N E R G Y G R O W T H C O M P A N Y B A L L A R D P O W E R S Y S T E M S PEM Stack Manufacturing: Industry Status Duarte R. Sousa, PE August 11, 2011 AUGUST 2009 P A G E 2 Overview of PEM Stack Manufacturing MEA Manufacturing Plate Manufacturing Stack Assembly Stack Conditioning and Testing Package and Ship For each of the four main processes, the following will be provided: 1. A brief history of where we have been; 2. Where we are today; 3. Where we would like to transition to; 4. Gaps and proposals. AUGUST 2009 P A G E 3 PEM Stack Manufacturing: Cost Overview * The MEA was readily identified as the major cost driver in a 10 kW stationary stack. * The precious metal catalyst electrode is the major cost driver for the MEA.

256

Photovoltaic manufacturing technology, Phase 1  

DOE Green Energy (OSTI)

This report describes subcontracted research by the Chronar Corporation, prepared by Advanced Photovoltaic Systems, Inc. (APS) for Phase 1 of the Photovoltaic Manufacturing Technology Development project. Amorphous silicon is chosen as the PV technology that Chronar Corporation and APS believe offers the greatest potential for manufacturing improvements, which, in turn, will result in significant cost reductions and performance improvements in photovoltaic products. The APS Eureka'' facility was chosen as the manufacturing system that can offer the possibility of achieving these production enhancements. The relationship of the Eureka'' facility to Chronar's batch'' plants is discussed. Five key areas are also identified that could meet the objectives of manufacturing potential that could lead to improved performance, reduced manufacturing costs, and significantly increased production. The projected long-term potential benefits of these areas are discussed, as well as problems that may impede the achievement of the hoped-for developments. A significant number of the problems discussed are of a generic nature and could be of general interest to the industry. The final section of this document addresses the cost and time estimates for achieving the solutions to the problems discussed earlier. Emphasis is placed on the number, type, and cost of the human resources required for the project.

Not Available

1992-10-01T23:59:59.000Z

257

Method of manufacturing positive nickel hydroxide electrodes  

DOE Patents (OSTI)

A method of manufacturing a positive nickel hydroxide electrode is discussed. A highly porous core structure of organic material having a fibrous or reticular texture is uniformly coated with nickel powder and then subjected to a thermal treatment which provides sintering of the powder coating and removal of the organic core material. A consolidated, porous nickel support structure is thus produced which has substantially the same texture and porosity as the initial core structure. To provide the positive electrode including the active mass, nickel hydroxide is deposited in the pores of the nickel support structure.

Gutjahr, M.A.; Schmid, R.; Beccu, K.D.

1975-12-16T23:59:59.000Z

258

Energy Department to Work with National Association of Manufacturers to  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

to Work with National Association of to Work with National Association of Manufacturers to Increase Industrial Energy Efficiency Energy Department to Work with National Association of Manufacturers to Increase Industrial Energy Efficiency June 12, 2007 - 1:40pm Addthis WASHINGTON, DC - U.S. Department of Energy (DOE) Secretary Samuel W. Bodman today expanded DOE's work to maximize energy efficiency by increasing cooperation among U.S. industry and energy efficiency experts, through a Memorandum of Understanding (MOU) with the National Association of Manufacturers (NAM). Specifically, this MOU includes a variety of activities, which aim to assist manufacturing facilities in implementing an energy management program; adopt clean, efficient technologies; and achieve continual energy efficiency and intensity reduction improvements. Through

259

Energy Department to Work with National Association of Manufacturers to  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Energy Department to Work with National Association of Energy Department to Work with National Association of Manufacturers to Increase Industrial Energy Efficiency Energy Department to Work with National Association of Manufacturers to Increase Industrial Energy Efficiency June 12, 2007 - 1:40pm Addthis WASHINGTON, DC - U.S. Department of Energy (DOE) Secretary Samuel W. Bodman today expanded DOE's work to maximize energy efficiency by increasing cooperation among U.S. industry and energy efficiency experts, through a Memorandum of Understanding (MOU) with the National Association of Manufacturers (NAM). Specifically, this MOU includes a variety of activities, which aim to assist manufacturing facilities in implementing an energy management program; adopt clean, efficient technologies; and achieve continual energy efficiency and intensity reduction improvements. Through

260

2002 Manufacturing Energy Consumption Survey - User Needs Survey  

U.S. Energy Information Administration (EIA) Indexed Site

2002 Manufacturing Energy Consumption Survey: User-Needs Survey 2002 Manufacturing Energy Consumption Survey: User-Needs Survey View current results. We need your help in designing the next “ Energy Consumption Survey” (MECS)! As our valued customer, you are in an important position to tell us what kinds of data are most useful in helping you understand energy consumption in the U.S. manufacturing sector. Below is a short electronic survey with just a few questions. We will stop collecting responses for user feedback on May 17, 2002. This deadline serves to meet our intended release date of April/May 2003 for fielding MECS2002. The MECS is designed to produce estimates of energy consumption and other energy-related activities in manufacturing. The survey also collects information on energy expenditures, average prices, onsite generation of

Note: This page contains sample records for the topic "activity manufacturing agriculture" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Sales Tax Exemption for Manufacturing Facilities | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Sales Tax Exemption for Manufacturing Facilities Sales Tax Exemption for Manufacturing Facilities Sales Tax Exemption for Manufacturing Facilities < Back Eligibility Industrial Savings Category Wind Buying & Making Electricity Maximum Rebate 50% of capital investment in the eligible project Program Info Start Date 7/1/2008 State Kentucky Program Type Sales Tax Incentive Rebate Amount 100% sales and use tax refund Provider Kentucky Cabinet for Economic Development In August 2007 Kentucky established the ''Incentives for Energy Independence Act'' to promote the development of renewable energy and alternative fuel facilities, energy efficient buildings, alternative fuel vehicles, research and development activities and other energy initiatives. This includes a sales tax exemption which allows manufacturers to apply for

262

Agriculture and the greenhouse effect  

SciTech Connect

This article discusses research of the US Department of Agriculture's Agricultural Research Service and the US Department of Energy's Carbon Dioxide Research Division to anticipate the effects of increased atmospheric carbon dioxide on American agriculture. Experiments involving exposure of plants to elevated CO/sub 2/ and attempts to model the productivity of crops as atmospheric CO/sub 2/ increases are described. The scientists quoted in the article are optimistic, emphasizing the beneficial effects of the elevated CO/sub 2/ on crops and speculating that problems caused by associated climate changes can be accommodated by movement of crop regions and by introduction of new varieties.

1988-03-01T23:59:59.000Z

263

Innovative Manufactured Housing Urban Design Demonstration Project  

Science Conference Proceedings (OSTI)

One quarter of the new houses sold in the United States in 1999 were manufactured homes, and manufactured housing represents an important and growing market for power producers. One niche market opportunity for manufactured homes is in urban areas. EPRI facilitated the completion of two limited demonstrations of energy efficient manufactured homes designed specifically for urban neighborhoods.

2000-10-05T23:59:59.000Z

264

The Advanced Manufacturing Jobs and Innovation Accelerator ...  

Science Conference Proceedings (OSTI)

Page 1. Advanced Manufacturing Jobs and Innovation Accelerator Challenge – Application Guide & Document Checklist 1 of 4 ...

2012-06-26T23:59:59.000Z

265

Establishing Greener Products and Manufacturing Processes  

E-Print Network (OSTI)

energy monitoring of machine tools,” CIRP Annals - Manufacturing INTERNATIONAL JOURNAL OF PRECISION ENGINEERING

Linke, Barbara; Huang, Yu-Chu; Dornfeld, David

2012-01-01T23:59:59.000Z

266

Inverter Controlled Screw Air Compressor Manufacturers ...  

U.S. Energy Information Administration (EIA)

Inverter Controlled Screw Air Compressor, Inverter Controlled Screw Air Compressor Manufacturers & Suppliers Directory - Find here Inverter ...

267

Topic 2: Extremely Efficient & Effective Manufacturing  

Science Conference Proceedings (OSTI)

... without formal training in engineering.” • “If (high performance computing is) shared throughout the entire manufacturing ...

2013-06-11T23:59:59.000Z

268

Manufacturing Consumption of Energy 1994  

Gasoline and Diesel Fuel Update (EIA)

Energy Information Administration/Manufacturing Consumption of Energy 1994 Energy Information Administration/Manufacturing Consumption of Energy 1994 Introduction The market for natural gas has been changing for quite some time. As part of natural gas restructuring, gas pipelines were opened to multiple users. Manufacturers or their representatives could go directly to the wellhead to purchase their natural gas, arrange the transportation, and have the natural gas delivered either by the local distribution company or directly through a connecting pipeline. More recently, the electricity markets have been undergoing change. When Congress passed the Energy Policy Act of 1992, requirements were included not only to open access to the ownership of electricity generation, but also to open access to the transmission lines so that wholesale trade in electricity would be possible. Now several States, including California and

269

Manufacturing Science and Technology: Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

Ion Beam Manufacture Ion Beam Manufacture PDF format (113 kb) Example sine wave FIB sputtered into initially planar Si substrate Example sine wave FIB sputtered into initially planar Si substrate Sandia Manufacturing Science & Technology's Focused Ion Beam (FIB) laboratory provides an opportunity for research, development and prototyping. Currently, our scientists are developing methods for ion beam sculpting microscale tools, components and devices. This includes shaping of specialty tools such as end-mills, turning tools and indenters. Many of these have been used in ultra-precision machining DOE applications. Additionally, staff are developing the capability to ion mill geometrically-complex features and substrates. This includes the ability to sputter predetermined curved shapes of various symmetries and

270

Manufacturing Consumption of Energy 1994  

U.S. Energy Information Administration (EIA) Indexed Site

Manufacturing Manufacturing Energy Consumption Survey Forms Form EIA-846A (4-6-95) U.S. Department of Commerce Bureau of the Census Acting as Collecting and Compiling Agent For 1994 MANUFACTURING ENERGY CONSUMPTION SURVEY Public reporting burden for this collection of information is estimated to average 9 hours per response, including the time of reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to the Energy Information Administration, Office of Statistical Standards, EI-73, 1707 H-Street, NW, Washington, DC 20585; and to the Office of Information and Regulatory Affairs, Office of

271

Manufacturing Services | Data.gov  

NLE Websites -- All DOE Office Websites (Extended Search)

Services Services Manufacturing Data/Tools Research/Tech Services Apps Challenges Blogs Let's Talk Manufacturing You are here Data.gov » Communities » Manufacturing Services Do you have a new idea? You may need to file a patent to both develop it and protect it. Find out more below. Search for existing patents Apply for a patent Business Owners Getting a business started, established, and growing is difficult. We want to make that easier. Check out the government services below that are available to businesses, and find out more about what's coming with StartUp America. Start a business Access financing Find opportunities to sell products and services to the government Grow your business Help with exporting for beginners and for experts. Shared Facilities Facilities can be a huge factor in whether you create a new product or

272

"S" Glass Manufacturing Technology Transfer  

SciTech Connect

A glass-ceramic-to metal sealing technology patented by Sandia National Laboratories, Albuquerque (SNLA) was developed by MRC-Mound for use in the manufacture of weapon components. Successful implementation attracted increasingly widespread weapon use of this technology. "S-glass" manufacturing technology was transferred to commercial vendors to ensure that weapons production schedules would be met in the coming years. Such transfer also provided sources of this fledgling technology for the Department of Defense (DOD), aerospace and other commercial uses. The steps involved in the technology transfer are described, from the initial cooperative development work of Sandia and Mound scientists and technologists to the final phase of qualifying commercial vendors for component manufacture.

Buckner, Dean, A.; McCollister, Howard, L.

1988-06-01T23:59:59.000Z

273

Manufacturing Spotlight: Boosting American Competitiveness | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Manufacturing Spotlight: Boosting American Competitiveness Manufacturing Spotlight: Boosting American Competitiveness Manufacturing Spotlight: Boosting American Competitiveness January 6, 2014 - 1:06pm Addthis Libby Wayman Clean Energy Manufacturing Initiative Director Advancing the nation's clean energy manufacturing industry helps to capture the value of U.S. innovation in clean energy technologies, fosters further innovation right here in America, and makes U.S. manufacturers more competitive by reducing their energy costs - all while creating jobs and building a more sustainable planet for future generations. Industry and government are working together to expand American leadership in this sector by bringing new clean energy technologies to the marketplace and making manufacturing processes more energy efficient.

274

Manufacturing for the Hydrogen Economy Manufacturing Research & Development  

E-Print Network (OSTI)

that convert hydrogen into electric energy, (2) hydrogen storage systems, and (3) large-scale hydrogen of a hydrogen energy economy, moving from today's laboratory-scale fabrication technologies to high and prioritize topics for public-private R&D on manufacturing hydrogen storage system components. Scope

275

Manufacturing Science and Technology: Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

Thin Films Thin Films PDF format (189 kb) Multi Layer Thin Films Multi Layer Thin Films Planetary Sputtering SystemsPlanetary Sputtering Systems Planetary Sputtering Systems The Thin Film laboratory within Manufacturing Science & Technology provides a variety of vapor deposition processes and facilities for cooperative research and development. Available capabilities include electron beam evaporation, sputter deposition, reactive deposition processes, atomic layer deposition (ALD) and specialized techniques such as focused ion beam induced chemical vapor deposition. Equipment can be reconfigured for prototyping or it can be dedicated to long-term research, development and manufacturing. Most sputter and evaporative deposition systems are capable of depositing multiple materials.

276

Advancing manufacturing through computational chemistry  

SciTech Connect

The capabilities of nanotechnology and computational chemistry are reaching a point of convergence. New computer hardware and novel computational methods have created opportunities to test proposed nanometer-scale devices, investigate molecular manufacturing and model and predict properties of new materials. Experimental methods are also beginning to provide new capabilities that make the possibility of manufacturing various devices with atomic precision tangible. In this paper, we will discuss some of the novel computational methods we have used in molecular dynamics simulations of polymer processes, neural network predictions of new materials, and simulations of proposed nano-bearings and fluid dynamics in nano- sized devices.

Noid, D.W.; Sumpter, B.G.; Tuzun, R.E.

1995-12-31T23:59:59.000Z

277

EVA for Small Manufacturing Companies  

E-Print Network (OSTI)

This paper examines introducing Economic Value Added as a performance measure for small manufacturing companies. Advantages and disadvantages of using Economic Value Added as a primary measure of performance as compared to sales, revenues, earnings, operating profit, profit after tax, and profit margin are investigated. The Economic Value Added calculation using data from a small company’s income and balance sheet statements is illustrated. Necessary adjustments to these financial statements, that are typical for a small company, are demonstrated to prepare the data for the Economic Value Added determination. Finally, potential improvement opportunities resulting from using Economic Value Added as a performance measure in small manufacturing companies are discussed.

Narcyz Roztocki; Kim Lascola Needy

1999-01-01T23:59:59.000Z

278

Plastic Product Manufacturing (NAICS 3261)  

Science Conference Proceedings (OSTI)

The U.S. plastics product manufacturing industry (NAICS 3261), which consists of more than 12,000 firms with combined annual revenues of about $170 billion, is one of the ten largest manufacturing industries in the country in terms of sales. A large amount of electricity is consumed by the plastics products industry, with more than half of their usage going to machine drives; therefore, it is with motors and drives that the greatest opportunities for energy savings lie. Several electric technology option...

2012-01-31T23:59:59.000Z

279

Method for manufacturing glass frit  

SciTech Connect

A method of manufacturing a glass frit for use in the manufacture of uniform glass microspheres to serve as containers for laser fusion fuel to be exposed to laser energy which includes the formation of a glass gel which is then dried, pulverized, and very accurately sized to particles in a range of, for example, 125 to 149 micrometers. The particles contain an occluded material such as urea which expands when heated. The sized particles are washed, dried, and subjected to heat to control the moisture content prior to being introduced into a system to form microspheres.

Budrick, Ronald G. (Ann Arbor, MI); King, Frank T. (Hillsboro, OR); Nolen, Jr., Robert L. (Ann Arbor, MI); Solomon, David E. (Ann Arbor, MI)

1977-01-01T23:59:59.000Z

280

Renewable Agricultural Energy | Open Energy Information  

Open Energy Info (EERE)

Login | Sign Up Search Page Edit with form History Facebook icon Twitter icon Renewable Agricultural Energy Jump to: navigation, search Name Renewable Agricultural Energy...

Note: This page contains sample records for the topic "activity manufacturing agriculture" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Press Conference Call Tomorrow: Agriculture Secretary Vilsack...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Press Conference Call Tomorrow: Agriculture Secretary Vilsack and Energy Secretary Chu to Discuss Efforts to Reduce U.S. Oil Dependence Press Conference Call Tomorrow: Agriculture...

282

Sustainable Agriculture Network | Open Energy Information  

Open Energy Info (EERE)

"Sustainable Agriculture Network" Retrieved from "http:en.openei.orgwindex.php?titleSustainableAgricultureNetwork&oldid312235" Categories: Clean Energy Organizations...

283

Three ACE awards for California Agriculture  

E-Print Network (OSTI)

Editor Janet White accepted the awards during the 2012 ACEa noxious weed. Three ACE awards for California AgricultureAgriculture team has won three awards from the Association

Editors, by

2012-01-01T23:59:59.000Z

284

Energy Secretary Chu, Agriculture Secretary Vilsack Announce...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Chu, Agriculture Secretary Vilsack Announce 6.3 million for Biofuels Research Energy Secretary Chu, Agriculture Secretary Vilsack Announce 6.3 million for Biofuels Research July...

285

A Road Map for Success: How Northwest Manufactured Housing Conservation Efforts Revolutionized an Industry.  

Science Conference Proceedings (OSTI)

The evolution of an ongoing Bonneville Power Administration effort to improve the energy efficiency of manufactured homes is chronicled in this informal history. Over the past nine years, Bonneville`s manufactured housing project has undertaken many activities, including technical studies, cooperative ventures, design studies, and information dissemination. These activities are covered.

Gilbertson, William L.

1993-04-01T23:59:59.000Z

286

Wind Powering America: Agricultural Podcasts  

Wind Powering America (EERE)

agricultural/podcasts.asp A series of agricultural/podcasts.asp A series of radio interviews on wind energy aimed at a rural stakeholder audience produced by Wind Powering America and the National Association of Farm Broadcasters. en-us julie.jones@nrel.gov (Julie Jones) http://www.windpoweringamerica.gov/images/wpa_logo_sm.jpg Wind Powering America: Agricultural Podcasts http://www.windpoweringamerica.gov/agricultural/podcasts.asp Wind Energy Forum Enhances Positives of Wind Production http://www.windpoweringamerica.gov/filter_detail.asp?itemid=4043 http://www.windpoweringamerica.gov/filter_detail.asp?itemid=4043 Thu, 14 Nov 2013 00:00:00 MST Rural Communities Benefit from Wind Energy's Continued Success http://www.windpoweringamerica.gov/filter_detail.asp?itemid=4021 http://www.windpoweringamerica.gov/filter_detail.asp?itemid=4021 Tue, 29

287

Multiplex detection of agricultural pathogens  

DOE Patents (OSTI)

Described are kits and methods useful for detection of seven agricultural pathogens (BPSV; BHV; BVD; FMDV; BTV; SVD; and VESV) in a sample. Genomic sequence information from 7 agricultural pathogens was analyzed to identify signature sequences, e.g., polynucleotide sequences useful for confirming the presence or absence of a pathogen in a sample. Primer and probe sets were designed and optimized for use in a PCR based, multiplexed Luminex assay to successfully identify the presence or absence of pathogens in a sample.

McBride, Mary Teresa (Brentwood, CA); Slezak, Thomas Richard (Livermore, CA); Messenger, Sharon Lee (Kensington, CA)

2010-09-14T23:59:59.000Z

288

Multiplex detection of agricultural pathogens  

DOE Patents (OSTI)

Described are kits and methods useful for detection of agricultural pathogens in a sample. Genomic sequence information from agricultural pathogens was analyzed to identify signature sequences, e.g., polynucleotide sequences useful for confirming the presence or absence of a pathogen in a sample. Primer and probe sets were designed and optimized for use in a PCR based, multiplexed Luminex assay and/or an array assay to successfully identify the presence or absence of pathogens in a sample.

Siezak, Thomas R.; Gardner, Shea; Torres, Clinton; Vitalis, Elizabeth; Lenhoff, Raymond J.

2013-01-15T23:59:59.000Z

289

Making Products Active with Intelligent Agents for Supporting PLM Making Products Active with Intelligent Agents for  

E-Print Network (OSTI)

within manufacturing enterprises have arose in last years, like Agile Manufacturing and collaboration available systems are usually focused on the use of additional information to support business processes, reducing inconsistencies, and optimizing product's definition and manufacturing activities. In this paper

Paris-Sud XI, Université de

290

Alternative Fuels Data Center: Clean Agriculture USA  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Clean Agriculture USA Clean Agriculture USA to someone by E-mail Share Alternative Fuels Data Center: Clean Agriculture USA on Facebook Tweet about Alternative Fuels Data Center: Clean Agriculture USA on Twitter Bookmark Alternative Fuels Data Center: Clean Agriculture USA on Google Bookmark Alternative Fuels Data Center: Clean Agriculture USA on Delicious Rank Alternative Fuels Data Center: Clean Agriculture USA on Digg Find More places to share Alternative Fuels Data Center: Clean Agriculture USA on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Clean Agriculture USA Clean Agriculture USA is a voluntary program that promotes the reduction of diesel exhaust emissions from agricultural equipment and vehicles by encouraging proper operations and maintenance by farmers, ranchers, and

291

Process for manufacturing multilayer capacitors  

DOE Patents (OSTI)

The invention is directed to a method of manufacture of multilayer electrical components, especially capacitors, and components made by such a method. High capacitance dielectric materials and low cost metallizations layered with such dielectrics may be fabricated as multilayer electrical components by sintering the metallizations and the dielectrics during the fabrication process by application of microwave radiation.

Lauf, Robert J. (Oak Ridge, TN); Holcombe, Cressie E. (Knoxville, TN); Dykes, Norman L. (Oak Ridge, TN)

1996-01-01T23:59:59.000Z

292

Heat treating of manufactured components  

DOE Patents (OSTI)

An apparatus for heat treating manufactured components using microwave energy and microwave susceptor material is disclosed. The system typically includes an insulating vessel placed within a microwave applicator chamber. A moderating material is positioned inside the insulating vessel so that a substantial portion of the exterior surface of each component for heat treating is in contact with the moderating material.

Ripley, Edward B. (Knoxville, TN)

2012-05-22T23:59:59.000Z

293

Process for manufacturing multilayer capacitors  

DOE Patents (OSTI)

The invention is directed to a method of manufacture of multilayer electrical components, especially capacitors, and components made by such a method. High capacitance dielectric materials and low cost metallizations layered with such dielectrics may be fabricated as multilayer electrical components by sintering the metallizations and the dielectrics during the fabrication process by application of microwave radiation. 4 figs.

Lauf, R.J.; Holcombe, C.E.; Dykes, N.L.

1996-01-02T23:59:59.000Z

294

Vietnam-EC-LEDS in the Agriculture Sector | Open Energy Information  

Open Energy Info (EERE)

Vietnam-EC-LEDS in the Agriculture Sector Vietnam-EC-LEDS in the Agriculture Sector Jump to: navigation, search Name Vietnam-EC-LEDS in the Agriculture Sector Agency/Company /Organization United States Department of Agriculture, United States Department of State Partner Ministry of Agriculture, Ministry of Environment Sector Climate, Land Focus Area Agriculture, Economic Development, Greenhouse Gas, Land Use Topics Adaptation, Implementation, Low emission development planning, -LEDS, Policies/deployment programs Program Start 2011 Program End 2013 Country Vietnam South-Eastern Asia References Land Use Assessment Toolkit - Agriculture Resources[1] Overview Progress and Outcomes Capacity building activities include strengthening implementation of climate change policies, development of climate change policies, and

295

Analysis of Agricultural Greenhouse Gas Mitigation Options within a Multi-sector Economic Framework  

DOE Green Energy (OSTI)

National-scale analysis of greenhouse gas mitigation options is generally carried out using top-down economic models with moderate energy detail but very limited detail in agriculture and forestry. However, a complete analysis of greenhouse gas mitigation options requires an improved representation of agriculture within the top-down economic models used for analysis of climate policy. Greenhouse gas mitigation options within the agricultural sector include changes in afforestation of agricultural lands, crop and livestock management practices, harvesting of biomass crops for fuel, and the sequestration of carbon in agricultural soils. Analysis of such options is usually carried out in a bottom-up model such as the Agricultural Sector Model (ASM). We report on activities to combine the bottom-up agricultural detail from ASM with the top-down economic and energy structure used at Pacific Northwest National Laboratory (PNNL), which has been used extensively for analysis of alternative carbon mitigation strategies.

Sands, Ronald D.; Mccarl, Bruce A.; Gillig, Dhazn; Blanford, Geoffrey J.; Gale, J.; Kaya, Y.

2003-01-01T23:59:59.000Z

296

List of Manufacturing Groups Displayed in the 1998 Manufacturing Energy  

U.S. Energy Information Administration (EIA) Indexed Site

21 manufacturing subsectors (3-digit NAICS codes); 21 manufacturing subsectors (3-digit NAICS codes); 311 Food 312 Beverage and Tobacco Products 313 Textile Mills 314 Textile Product Mills 315 Apparel 316 Leather and Allied Products 321 Wood Products 322 Paper 323 Printing and Related Support 324 Petroleum and Coal Products 325 Chemicals 326 Plastics and Rubber Products 327 Nonmetallic Mineral Products 331 Primary Metals 332 Fabricated Metal Products 333 Machinery 334 Computer and Electronic Products 335 Electrical Equip., Appliances, and Components 336 Transportation Equipment 337 Furniture and Related Products 339 Miscellaneous 6 industry groups (4-digit NAICS codes); 3212 Veneer, Plywood, and Engineered Woods 3219 Other Wood Products 3272 Glass and Glass Products 3312 Steel Products from Purchased Steel 3313 Alumina and Aluminum

297

Procedure for the classification and characterization of farms for agricultural production planning: Application in the Northwest of Spain  

Science Conference Proceedings (OSTI)

The agricultural activity in Galicia, NW Spain, is carried out on farms that are characterized by a diversity of land uses and production models, a variety of sizes, and considerable geographical dispersion. Any attempt of agricultural production planning ... Keywords: Agricultural production planning, Farm types, Rural development, Software applications

J. A. Riveiro; M. F. Marey; J. L. Marco; C. J. Alvarez

2008-05-01T23:59:59.000Z

298

Soap Manufacturing TechnologyChapter 12 Manufacture of Multicolored and Multicomponent Soaps  

Science Conference Proceedings (OSTI)

Soap Manufacturing Technology Chapter 12 Manufacture of Multicolored and Multicomponent Soaps Surfactants and Detergents eChapters Surfactants - Detergents Press Downloadable pdf of\tChapter 12 Manufacture of Mult

299

TX-100 manufacturing final project report.  

DOE Green Energy (OSTI)

This report details the work completed under the TX-100 blade manufacturing portion of the Carbon-Hybrid Blade Developments: Standard and Twist-Coupled Prototype project. The TX-100 blade is a 9 meter prototype blade designed with bend-twist coupling to augment the mitigation of peak loads during normal turbine operation. This structural coupling was achieved by locating off axis carbon fiber in the outboard portion of the blade skins. The report will present the tooling selection, blade production, blade instrumentation, blade shipping and adapter plate design and fabrication. The baseline blade used for this project was the ERS-100 (Revision D) wind turbine blade. The molds used for the production of the TX-100 were originally built for the production of the CX-100 blade. The same high pressure and low pressure skin molds were used to manufacture the TX-100 skins. In order to compensate for the difference in skin thickness between the CX-100 and the TX-100, however, a new TX-100 shear web plug and mold were required. Both the blade assembly fixture and the root stud insertion fixture used for the CX-100 blades could be utilized for the TX-100 blades. A production run of seven TX-100 prototype blades was undertaken at TPI Composites during the month of October, 2004. Of those seven blades, four were instrumented with strain gauges before final assembly. After production at the TPI Composites facility in Rhode Island, the blades were shipped to various test sites: two blades to the National Wind Technology Center at the National Renewable Energy Laboratory in Boulder, Colorado, two blades to Sandia National Laboratory in Albuquerque, New Mexico and three blades to the United States Department of Agriculture turbine field test facility in Bushland, Texas. An adapter plate was designed to allow the TX-100 blades to be installed on existing Micon 65/13M turbines at the USDA site. The conclusion of this program is the kick-off of the TX-100 blade testing at the three testing facilities.

Ashwill, Thomas D.; Berry, Derek S. (TPI Composites, Inc., Warren, RI)

2007-11-01T23:59:59.000Z

300

Explore Careers in Manufacturing | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Careers in Manufacturing Careers in Manufacturing Explore Careers in Manufacturing About the Advanced Manufacturing Office The Advanced Manufacturing Office (AMO) invests in public-private research and development partnerships and encourages a culture of continuous improvement in corporate energy management to bring about a transformation in U.S. manufacturing. Image of scientists examining an experiment. back to top What types of jobs are available? Innovation Process Design & Development Engineers Mechanical Electrical Chemical Biochemical Health Safety Environmental Scientists Materials Computer Automation Software Energy Storage Production Engineers Industrial systems Process Materials Equipment Controls Supply Chain Logistics Quality Control Maintenance, Installation & Repair Machinists Efficient Use

Note: This page contains sample records for the topic "activity manufacturing agriculture" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Batteries - Materials Processing and Manufacturing Breakout session  

NLE Websites -- All DOE Office Websites (Extended Search)

Materials Processing and Manufacturing Materials Processing and Manufacturing Breakout Session #1 - Discussion of Performance Targets and Barriers Comments on the Achievability of the Targets * PHEV40 and AEV 100 possible with success in current R&D * Achievable with Li-ion manufacturing improvements and advanced chemistries in current Li-ion R&D * AEV300 more challenging * Requires manufacturing improvements and materials and chemistry improvements * Quantify benefits/ drawbacks of fast charging vs. increased electrode cost Barriers Interfering with Reaching the Targets * Materials cost * Need: Material synthesis in large quantities/ with increased impurities and broader size distributions or advanced manufacturing * Electrode thickness - manufacturing and performance * Separator cost/ performance/ safety

302

MST: Organizations: Manufacturing Processes & Services  

NLE Websites -- All DOE Office Websites (Extended Search)

Manufacturing Processing Manufacturing Processing Manufacturing Process, Science, and Technology Mark Smith Mark Smith, Senior Manager Manufacturing Process Science and Technology conducts research and development on advanced manufacturing process and materials technologies. It provides manufacturing process development, technical consulting, and technology transfer to support Sandia product realization needs. This organization also provides prototype fabrication and specialized production services, as required, to support Sandia missions. Departments Dianna Blair Mike Kelly Alex Roesler Paul C. McKey Thin Film, Vacuum, and Packaging Organic Materials Ceramics and Glass Meso Mfg. and System Development Dianna Blair, Manager Mike Kelly, Manager Alex Roesler, Manager Paul C. McKey,

303

Manufacturers' View on Benchmarking and Disclosure  

U.S. Energy Information Administration (EIA) Indexed Site

Association of Electrical and Association of Electrical and Medical Imaging Equipment Manufacturers Manufacturing Solutions for Energy Efficiency in Buildings Patrick Hughes Policy Director, High Performance Buildings National Electrical Manufacturers Association The Association of Electrical and Medical Imaging Equipment Manufacturers What is NEMA? The Association of Electrical Equipment and Medical Imaging Manufacturers Which policies encourage energy efficiency in buildings? Energy Savings Performance Contracts Tax Incentives Shaheen- Portman Benchmarking and Disclosure Bullitt Center Seattle, Washington The Association of Electrical Equipment and Medical Imaging Manufacturers Energy Savings Performance Contracts ESPCs pay for efficiency upgrades with

304

Advanced Manufacturing Office: Industrial Assessment Centers (IACs)  

NLE Websites -- All DOE Office Websites (Extended Search)

Industrial Assessment Industrial Assessment Centers (IACs) to someone by E-mail Share Advanced Manufacturing Office: Industrial Assessment Centers (IACs) on Facebook Tweet about Advanced Manufacturing Office: Industrial Assessment Centers (IACs) on Twitter Bookmark Advanced Manufacturing Office: Industrial Assessment Centers (IACs) on Google Bookmark Advanced Manufacturing Office: Industrial Assessment Centers (IACs) on Delicious Rank Advanced Manufacturing Office: Industrial Assessment Centers (IACs) on Digg Find More places to share Advanced Manufacturing Office: Industrial Assessment Centers (IACs) on AddThis.com... Industrial Assessment Centers (IACs) Learn More Learn how companies have benefited from IAC assessments. Search the IAC Database for recommendations and savings achieved.

305

Manufacturing  

Science Conference Proceedings (OSTI)

... Report 91-4626, June, 1991. - 15 - September 5, 1991 time_t(seconds) timeval(sec,usec) time gettimeofday OS localtime gmtimelocaltime ctime ...

1993-07-26T23:59:59.000Z

306

Manufacturing Consumption of Energy 1994  

U.S. Energy Information Administration (EIA) Indexed Site

2(94) 2(94) Distribution Category UC-950 Manufacturing Consumption of Energy 1994 December 1997 Energy Information Administration Office of Energy Markets and End Use U.S. Department of Energy Washington, DC 20585 This report was prepared by the Energy Information Administration, the independent statistical and analytical agency within the U.S. Department of Energy. The information contained herein should be attributed to the Energy Information Administration and should not be construed as advocating or reflecting any policy position of the Department of Energy or any other organization. ii Energy Information Administration/Manufacturing Consumption of Energy 1994 Contacts This publication was prepared by the Energy Information Administration (EIA) under the general direction of W. Calvin

307

Manufacturing Consumption of Energy 1994  

U.S. Energy Information Administration (EIA) Indexed Site

E E U.S. Census Regions and Divisions 489 Energy Information Administration/Manufacturing Consumption of Energy 1994 Source: U.S. Department of Commerce, Bureau of the Census, Statistical Abstract of the United States,1996 (Washington, DC, October 1996), Figure 1. Appendix E U.S. Census Regions and Divisions Appendix F Descriptions of Major Industrial Groups and Selected Industries Executive Office of the President, Office of Management and Budget, Standard Industrial Classification Manual, 1987, pp. 67-263. 54 493 Energy Information Administration/Manufacturing Consumption of Energy 1994 Appendix F Descriptions of Major Industrial Groups and Selected Industries This appendix contains descriptions of industrial groups and selected industries taken from the Standard Industrial

308

Photovoltaic manufacturing technology, Phase 1  

DOE Green Energy (OSTI)

This report examines manufacturing multiple-band-gap, multiple- junction solar cells and photovoltaic modules. Amorphous silicon alloy material is deposited (using microwave plasma-assisted chemical vapor deposition) on a stainless-steel substrate using a roll-to-roll process that is continuous and automated. Rapid thermal equilibration of the metal substrate allows rapid throughput of large-area devices in smaller production machines. Potential improvements in the design, deposition, and module fabrication process are described. Problems are also discussed that could impede using these potential improvements. Energy Conversion Devices, Inc. (ECD) proposes cost and time estimates for investigating and solving these problems. Manufacturing modules for less than $1.00 per peak watt and stable module efficiencies of greater than 10% are near-term goals proposed by ECD. 18 refs.

Izu, M. (Energy Conversion Devices, Inc., Troy, MI (United States))

1992-03-01T23:59:59.000Z

309

Manufacturing Science and Technology: Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

Meso-Machining Meso-Machining PDF format (182 kb) Sandia's Micro-Electro Discharge Machine (Micro-EDM) (above). On the upper right inset is the Micro-EDM electode in copper that was made with the LIGA (electroforming) process. On the lower right inset is a screen fabricated into .006 inch kovar sheet using the Micro-EDM electrode. The walls of the screen are .002 inch wide by .006 inch deep. Meso-machining technologies being developed at Sandia National Laboratories will help manufacturers improve a variety of production processes, tools, and components. Meso-machining will benefit the aerospace, automotive, biomedical, and defense industries by creating feature sizes from the 1 to 50 micron range. Sandia's Manufacturing Science and Technology Center is developing the

310

Manufacturing Consumption of Energy 1994  

U.S. Energy Information Administration (EIA) Indexed Site

(MECS) > MECS 1994 Combined Consumption and Fuel Switching (MECS) > MECS 1994 Combined Consumption and Fuel Switching Manufacturing Energy Consumption Survey 1994 (Combined Consumption and Fuel Switching) Manufacturing Energy Consumption Logo Full Report - (file size 5.4 MB) pages:531 Selected Sections (PDF format) Contents (file size 56 kilobytes, 10 pages). Overview (file size 597 kilobytes, 11 pages). Chapters 1-3 (file size 265 kilobytes, 9 pages). Chapter 4 (file size 1,070 kilobytes, 15 pages). Appendix A - Detailed Tables Tables A1 - A8 (file size 1,031 kilobytes, 139 pages). Tables A9 - A23 (file size 746 kilobytes, 119 pages). Tables A24 - A29 (file size 485 kilobytes, 84 pages). Tables A30 - A44 (file size 338 kilobytes, 39 pages). Appendix B (file size 194 kilobytes, 24 pages). Appendix C (file size 116 kilobytes, 16 pages).

311

Manufacturing of Plutonium Tensile Specimens  

SciTech Connect

Details workflow conducted to manufacture high density alpha Plutonium tensile specimens to support Los Alamos National Laboratory's science campaigns. Introduces topics including the metallurgical challenge of Plutonium and the use of high performance super-computing to drive design. Addresses the utilization of Abaqus finite element analysis, programmable computer numerical controlled (CNC) machining, as well as glove box ergonomics and safety in order to design a process that will yield high quality Plutonium tensile specimens.

Knapp, Cameron M [Los Alamos National Laboratory

2012-08-01T23:59:59.000Z

312

Metalworking Machinery Manufacturing (NAICS 3335)  

Science Conference Proceedings (OSTI)

The U.S. metalworking machinery manufacturing industry (NAICS 3335) consists of about 7,900 firms with combined annual revenues of about $29 billion. Many (75%) of these firms are small, having fewer than 20 employees. This industry consumes a large amount of electricity, with about half of their usage going to drives that are used for machine tools; therefore, it is with motors and drives that the greatest opportunities for energy savings lie. Several electric technology options are available and identi...

2012-01-31T23:59:59.000Z

313

Advancing Manufacturing Research Through Competitions  

SciTech Connect

Competitions provide a technique for building interest and collaboration in targeted research areas. This paper will present a new competition that aims to increase collaboration amongst Universities, automation end-users, and automation manufacturers through a virtual competition. The virtual nature of the competition allows for reduced infrastructure requirements while maintaining realism in both the robotic equipment deployed and the scenarios. Details of the virtual environment as well as the competitions objectives, rules, and scoring metrics will be presented.

Balakirsky, Stephen [National Institute of Standards and Technology (NIST); Madhavan, Raj [ORNL

2009-01-01T23:59:59.000Z

314

Manufacturing Technology bulletin, July 1994  

Science Conference Proceedings (OSTI)

Inside this issue: (1) Robotic cleaning safer, faster, more reliable; robots taught how to clean in seconds instead of days. (2) Microporous insulating films can boost microcircuit performance; films display improved dielectric constant, mechanical properties, (3) Life-cycle analysis: the big picture; cradle-to-grave environmental analysis tailored to the needs of defense manufacturing, (4) New simulation tool predicts properties of forged metal; internal state variable model improves design, speeds development time.

Not Available

1994-07-01T23:59:59.000Z

315

MANUFACTURING CALIFORNIA LAWRENCE BERKELEY LAB POC David Chen  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

MANUFACTURING MANUFACTURING CALIFORNIA LAWRENCE BERKELEY LAB POC David Chen Telephone (510) 486-4506 Email dtchen@lbl.gov Industrial Gas Manufacturing 325120 All Other Basic Inorganic Chemical Manufacturing 325188 Plastics Material and Resin Manufacturing 325211 Explosives Manufacturing 325920 All Other Plastics Product Manufacturing 326199 Nonferrous Metal (except Copper and Aluminum) Rolling, Drawing, and Extruding 331491 Fabricated Structural Metal Manufacturing 332312 Metal Tank (Heavy Gauge) Manufacturing 332420 Other Metal Container Manufacturing 332439 Machine Shops 332710 Electroplating, Plating, Polishing, Anodizing, and Coloring 332813 Industrial valve Manufacturing 332911 Other Ordnance and Accessories Manufacturing 332995 All Other Miscellaneous Fabricated Metal Product Manufacturing

316

Multi-layer laminate structure and manufacturing method  

DOE Patents (OSTI)

The present invention is premised upon a multi-layer laminate structure and method of manufacture, more particularly to a method of constructing the multi-layer laminate structure utilizing a laminate frame and at least one energy activated flowable polymer.

Keenihan, James R.; Cleereman, Robert J.; Eurich, Gerald; Graham, Andrew T.; Langmaid, Joe A.

2013-01-29T23:59:59.000Z

317

Multi-layer laminate structure and manufacturing method  

SciTech Connect

The present invention is premised upon a multi-layer laminate structure and method of manufacture, more particularly to a method of constructing the multi-layer laminate structure utilizing a laminate frame and at least one energy activated flowable polymer.

Keenihan, James R. (Midland, MI); Cleereman, Robert J. (Midland, MI); Eurich, Gerald (Merrill, MI); Graham, Andrew T. (Midland, MI); Langmaid, Joe A. (Caro, MI)

2012-04-24T23:59:59.000Z

318

Fact Sheet: 48C Manufacturing Tax Credits  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

48C Manufacturing Tax Credits 48C Manufacturing Tax Credits In order to foster investment and job creation in clean energy manufacturing, the American Recovery and Reinvestment Act of 2009 included a tax credit for investments in manufacturing facilities for clean energy technologies. The Section 48C Advanced Manufacturing Tax Credit originally provided a 30% investment tax credit to 183 domestic clean energy manufacturing facilities valued at $2.3 billion. Today the IRS has announced the availability of additional 48C allocations, utilizing $150 million remaining tax credits that were never fully monetized by previous awardees. This tax credit program will help build a robust U.S. manufacturing capacity to supply clean energy projects with American-made parts and equipment. These manufacturing facilities will also

319

Manufacturing Demonstration Facility (MDF) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Manufacturing Demonstration Facility (MDF) Manufacturing Demonstration Facility (MDF) Manufacturing Demonstration Facility (MDF) October 11, 2013 - 9:44am Addthis The Manufacturing Demonstration Facility (MDF) is a collabora-tive manufacturing community that shares a common RD&D infrastructure. This shared infrastructure provides affordable access to advanced physical and virtual tools for rapidly demonstrating new manufacturing technologies and optimizing critical processes. Oak Ridge National Laboratory is home to AMO's MDF focused on Additive Manufacturing and Low-cost Carbon Fiber. Fostering Collaboration to Accelerate Progress Work conducted by MDF partners and users provides real data that is used to reduce the technical risk associated with full commercialization of promising foundational manufacturing process and materials innovations. The

320

SunShot Initiative: Solar Manufacturing Technology  

NLE Websites -- All DOE Office Websites (Extended Search)

Solar Manufacturing Technology to Solar Manufacturing Technology to someone by E-mail Share SunShot Initiative: Solar Manufacturing Technology on Facebook Tweet about SunShot Initiative: Solar Manufacturing Technology on Twitter Bookmark SunShot Initiative: Solar Manufacturing Technology on Google Bookmark SunShot Initiative: Solar Manufacturing Technology on Delicious Rank SunShot Initiative: Solar Manufacturing Technology on Digg Find More places to share SunShot Initiative: Solar Manufacturing Technology on AddThis.com... Concentrating Solar Power Photovoltaics Research & Development Competitive Awards Diversity in Science and Technology Advances National Clean Energy in Solar Grid Engineering for Accelerated Renewable Energy Deployment Physics of Reliability: Evaluating Design Insights for Component

Note: This page contains sample records for the topic "activity manufacturing agriculture" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Imperial Manufacturing: Order (2013-CE-5322)  

Energy.gov (U.S. Department of Energy (DOE))

DOE ordered Imperial Manufacturing, Inc. to pay a $8,000 civil penalty after finding Imperial Manufacturing had failed to certify that certain models of walk-in cooler and freezer components comply with the applicable energy conservation standards.

322

Creation and sustainment of manufacturing technology roadmaps  

E-Print Network (OSTI)

Manufacturing technology roadmaps align manufacturing capability development to product development and the driving business need. Roadmaps allow an executable business strategy to be communicated to all levels of an ...

Grillon, Louis S

2012-01-01T23:59:59.000Z

323

EERE: Advanced Manufacturing Office Home Page  

NLE Websites -- All DOE Office Websites (Extended Search)

Office Site Map Printable Version Share this resource Send a link to EERE: Advanced Manufacturing Office Home Page to someone by E-mail Share EERE: Advanced Manufacturing Office...

324

Clean Energy Manufacturing Incentive Program (Virginia)  

Energy.gov (U.S. Department of Energy (DOE))

In April 2011, Virginia created the Clean Energy Manufacturing Incentive Grant Program. The program is meant to replace the [http://en.openei.org/wiki/Solar_Manufacturing_Incentive_Grant_%28SMIG%29...

325

Posted 7/24/12 Manufacturing Engineer  

E-Print Network (OSTI)

, starters, and generators for the commercial transportation, hybrid electric vehicle and aerospace of technologically advanced aerospace and industrial products. We design and manufacture aerospace systems Prairie, WI 53158 Electromagnetic Enterprises (EME) designs and manufactures specialized electric motors

Heller, Barbara

326

Summit Manufacturing: Case Closure (2010-SE-0303)  

Energy.gov (U.S. Department of Energy (DOE))

DOE closed this case against Summit Manufacturing, Inc. without civil penalty after Summit Manufacturing provided information that the non-compliant products were not sold in the United States.

327

FACT SHEET: 48C MANUFACTURING TAX CREDITS  

Energy.gov (U.S. Department of Energy (DOE))

The Advanced Energy Manufacturing Tax Credit Program is helping build a robust U.S. manufacturing capacity to supply clean energy projects with American-made parts and equipment. On February 7,...

328

Climate VISION: Private Sector Initiatives: Automobile Manufacturers...  

Office of Scientific and Technical Information (OSTI)

The Alliance of Automobile Manufacturers, Inc. is a trade association composed of 10 car and light truck manufacturers with about 600,000 employees at more than 250 facilities...

329

Semantic Web for Manufacturing Web Services  

Science Conference Proceedings (OSTI)

As markets become unexpectedly turbulent with a shortened product life cycle and a power shift towards buyers, the need for methods to rapidly and cost-effectively develop products, production facilities and supporting software is becoming urgent. The use of a virtual enterprise plays a vital role in surviving turbulent markets. However, its success requires reliable and large-scale interoperation among trading partners via a semantic web of trading partners' services whose properties, capabilities, and interfaces are encoded in an unambiguous as well as computer-understandable form. This paper demonstrates a promising approach to integration and interoperation between a design house and a manufacturer by developing semantic web services for business and engineering transactions. To this end, detailed activity and information flow diagrams are developed, in which the two trading partners exchange messages and documents. The properties and capabilities of the manufacturer sites are defined using DARPA Agent Markup Language (DAML) ontology definition language. The prototype development of semantic webs shows that enterprises can widely interoperate in an unambiguous and autonomous manner; hence, virtual enterprise is realizable at a low cost.

Kulvatunyou, Boonserm [ORNL; Ivezic, Nenad [ORNL

2002-06-01T23:59:59.000Z

330

Agricultural and Biological Engineering College of Agricultural Sciences Cooperative Extension  

E-Print Network (OSTI)

that this trend will continue, especially if the prices for fossil fuels continue to increase. Other direct, and Pennsylvania Counties Cooperating Biomass Energy Dennis E. Buffington, Professor, Agricultural and Biological iomass energy is energy derived from organic matter of recent biological origin. Common forms of biomass

Lee, Dongwon

331

Smart Manufacturing, Construction, and Cyber-Physical ...  

Science Conference Proceedings (OSTI)

Strategic Goal:Smart Manufacturing, Construction, and Cyber-Physical Systems. Enable the next generation of innovative ...

2013-01-03T23:59:59.000Z

332

Emerging Global Trends in Advanced Manufacturing  

Science Conference Proceedings (OSTI)

Page 1. Emerging Global Trends in Advanced Manufacturing Stephanie S. Shipp, Project Leader Nayanee Gupta Bhavya Lal ...

2013-07-31T23:59:59.000Z

333

3D Shape Searching for Manufacturing Apps.  

Science Conference Proceedings (OSTI)

3D Shape Searching for Manufacturing Applications. Principal Investigator: Afzal Godil (301) 975-4262 afzal.godil@nist.gov. ...

2010-10-05T23:59:59.000Z

334

Affordable Semi-Manufacturing: Implications for ...  

Science Conference Proceedings (OSTI)

... Dan Armbrust will review industry economics and trends, as well as manufacturing collaboration in the semiconductor and photovoltaic industries. ...

2011-10-25T23:59:59.000Z

335

Materials Processing & Manufacturing Division's Fourth ... - TMS  

Science Conference Proceedings (OSTI)

Mar 3, 2003 ... Increasing energy prices offer manufacturers an excellent incentive to .... Retrofitting Regenerative Burners on Aluminum Melting Furnaces that ...

336

Arrayed Microchannel Manufacturing: Enabling a New ...  

Science Conference Proceedings (OSTI)

... Hydroprocessing USDA/DOE Biomass Program $2.4 million Work underway for upgrading pyrolysis oil Manufacturing Ohio Dept. ...

2011-08-02T23:59:59.000Z

337

National Network for Manufacturing Innovation (NNMI)  

Science Conference Proceedings (OSTI)

... Departments of Defense and Energy and other ... organizations from the Ohio-Pennsylvania-West ... manufacturing capabilities in companies large and ...

338

Data mining solves tough semiconductor manufacturing problems  

Science Conference Proceedings (OSTI)

Keywords: data mining, machine learning, manufacturing optimization, neural networks, pattern recognition, rule induction, self organizing maps, semiconductor yield enhancement

Mike Gardner; Jack Bieker

2000-08-01T23:59:59.000Z

339

Climate VISION: Private Sector Initiatives: Automobile Manufacturers...  

Office of Scientific and Technical Information (OSTI)

State Programs Technical Information Plant Assessments Training Calendar Software Tools Energy Management Results Technology Pathways Automobile Manufacturers - Results No...

340

The Advanced Manufacturing Technology Consortia (AMTech ...  

Science Conference Proceedings (OSTI)

... Advanced Manufacturing National Program Office National Institute of Standards ... Management (SAM) are required ... Clarifications to budget items ...

2013-08-21T23:59:59.000Z

Note: This page contains sample records for the topic "activity manufacturing agriculture" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

NIST Workshop on Sustainable Manufacturing: Metrics ...  

Science Conference Proceedings (OSTI)

... ICT for Design, Manufacturing and Supply chain Optimization for sustainable ... Lifecycle Management) and LCA tools to support energy and material ...

2011-10-11T23:59:59.000Z

342

Manufacturing Day Gaining Momentum: More than 150 ...  

Science Conference Proceedings (OSTI)

... "Manufacturing is an essential contributor to ... More than 150 companies and educational facilities have already registered their participation at www ...

2013-02-28T23:59:59.000Z

343

Definitition of Manufacturing R&D  

Science Conference Proceedings (OSTI)

Definition of Scope - Manufacturing-related R&D. ... or cost reduction), or increased environmental efficiency (safety, energy efficiency, environmental ...

2010-10-05T23:59:59.000Z

344

Manufacturing Supplier Network Resources | IMCP Playbook  

Science Conference Proceedings (OSTI)

... is a strategic integration and commitment of manufacturing efforts across the Office of Energy Efficiency and Renewable Energy's clean energy ...

2013-12-09T23:59:59.000Z

345

Ceramics and Additive Manufacturing; Exploring Compatibility ...  

Science Conference Proceedings (OSTI)

Symposium, Advanced Materials, Processes and Applications for Additive Manufacturing ... Lubricants in Deposition and Machining of Wire and Arc Additive ...

346

NIST and the Advanced Manufacturing Partnership National ...  

Science Conference Proceedings (OSTI)

... Increase private sector investment in ... Enhance manufacturing education at Community Colleges (CC). ... Federal funding to CCs to encourage ...

2012-09-08T23:59:59.000Z

347

Robust Capacity Planning in Semiconductor Manufacturing  

E-Print Network (OSTI)

Oct 3, 2001 ... Abstract: We present a stochastic programming approach to capacity planning under demand uncertainty in semiconductor manufacturing.

348

Solar energy systems for manufactured housing  

DOE Green Energy (OSTI)

The opportunities for solar energy utilization in manufactured housing such as mobile homes and modular homes are discussed. The general characteristics of the manufactured housing industry are described including market and prices. Special problems of the utilization of liquid heating collectors, air heating collectors, or passive types of solar heating systems in manufactured housing are considered. The market situation for solar energy in manufactured housing is discussed. The design of the Los Alamos Scientific Laboratory mobile/modular home is described.

Balcomb, J.D.

1976-01-01T23:59:59.000Z

349

Wind Manufacturing Facilities | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

--Alternative Fuel Vehicles --Batteries --Biofuels --Clean Cities -Building Design --Solar Decathlon -Manufacturing Energy Sources -Renewables --Solar ---SunShot --Wind...

350

New Manufacturing Extension Centers Planned for Arizona ...  

Science Conference Proceedings (OSTI)

... of Standards and Technology's (NIST) Hollings Manufacturing Extension Partnership (MEP) program has awarded cooperative agreements to the ...

2013-05-01T23:59:59.000Z

351

Manufacturing Extension Partnership (MEP) Centers for South ...  

Science Conference Proceedings (OSTI)

Manufacturing Extension Partnership (MEP) Centers for South Dakota and Kentucky. ... South Dakota and Kentucky Competition Time-line: ...

2013-03-13T23:59:59.000Z

352

Transformational Research in Civil Infrastructure and Manufacturing ...  

Science Conference Proceedings (OSTI)

Feb 4, 2011 ... automation for manufacturing; technologies to enable a smart grid; technologies for personalized medicine; technologies for water availability; ...

353

Virtual Reality for Manufacturing Case Studies  

Science Conference Proceedings (OSTI)

Virtual Reality for Manufacturing - Case Studies. Sandy Ressler National Institute of Standards and Technology sressler@nist.gov. ...

354

Advances in Hydroelectric Turbine Manufacturing and Repair  

Science Conference Proceedings (OSTI)

About this Symposium. Meeting, Materials Science & Technology 2013. Symposium, Advances in Hydroelectric Turbine Manufacturing and Repair. Sponsorship ...

355

Economic evaluation of the MIT process for manufacture of ethanol  

DOE Green Energy (OSTI)

This report summarizes the results of an economic evaluation of the MIT process for the manufacture of ethanol from cellulosic residues. Conceptual process designs were developed for two cases, Case A which is based on the experimental data obtained to date, and Case B which hypothesizes the suppression of acid byproducts. Manufacturing costs, including profit, were estimated at $12.20/million Btu for Case A and $9.40/million Btu for Case B. These are equivalent to about $1.05 and $0.80/gal ethanol respectively. These economic estimates may be slightly on the low side since they do not consider feedstock storage nor working capital requirements. Nevertheless, the manufacturing costs for Case A appear to be comparable to those of the manufacture of ethanol from corn. The plant size used for this analysis was 1500 ton/day corn stover. This is considered to be a realistic size. The conceptual plants make about 27 million gal/yr ethanol in Case A and 41 million gal/yr in Case B. The MIT process appears to be one of the more promising programs being developed under contract for DOE. It is recommended that the process research be continued. Three areas of concern were identified which must be investigated before the process can be commercialized. First, a satisfactory means of storage of corn stover and other agricultural residues must be developed. Second, a method to sterilize corn stover must be developed or it must be demonstrated that the MIT process can run continuously for extended periods with stover that has been sterilized. Third, research must be done to demonstrate the recycle and reuse of process water.

Jenkins, D.M.; Reddy, T.S.

1979-06-28T23:59:59.000Z

356

Energy Manufacturing Matthew Realff and Steven Danyluk  

E-Print Network (OSTI)

Energy Manufacturing Matthew Realff and Steven Danyluk Georgia Institute of Technology This white Foundation and held in Arlington VA, on March 24-25, 2009 on Energy Manufacturing. The workshop attendees participated in discussions and presented their views on energy manufacturing and the presentations

Das, Suman

357

Low Temperature PEM Fuel Cell Manufacturing Needs  

E-Print Network (OSTI)

Cell Manhattan Project #12; Cost drivers were identified for the following: · MEA · Plates · Balance of Plant (BOP) · Fuel Processing Manufacturing Fuel Cell Project ­ Phase 1 Note that this presentation-kilowatt reformer based FC generators #12;Manufacturing Fuel Cell Project ­ Phase 2 Manufacturing Roadmap · Projects

358

List of Processing and Manufacturing Equipment Incentives | Open Energy  

Open Energy Info (EERE)

Equipment Incentives Equipment Incentives Jump to: navigation, search The following contains the list of 130 Processing and Manufacturing Equipment Incentives. CSV (rows 1 - 130) Incentive Incentive Type Place Applicable Sector Eligible Technologies Active AEP Ohio - Commercial Custom Project Rebate Program (Ohio) Utility Rebate Program Ohio Commercial Fed. Government Industrial Institutional Local Government Nonprofit Schools State Government Tribal Government Boilers Central Air conditioners Chillers Custom/Others pending approval Furnaces Heat pumps Heat recovery Lighting Lighting Controls/Sensors Processing and Manufacturing Equipment Refrigerators Yes AEP Ohio - Commercial Self Direct Rebate Program (Ohio) Utility Rebate Program Ohio Commercial Fed. Government Industrial

359

Materials/manufacturing element of the Advanced Turbine System Program  

SciTech Connect

One of the supporting elements of the Advanced Turbine Systems (ATS) Program is the materials/manufacturing technologies task. The objective of this element is to address critical materials issues for both industrial and utility gas turbines. DOE Oak Ridge Operations Office (ORO) will manage this element of the program, and a team from DOE-ORO and Oak Ridge National Laboratory is coordinating the planning for the materials/manufacturing effort. This paper describes that planning activity which is in the early stages.

Karnitz, M.A.; Devan, J.H.; Holcomb, R.S.; Ferber, M.K.; Harrison, R.W.

1994-08-01T23:59:59.000Z

360

Needs assessment for manufacturing ceramic gas turbine components  

SciTech Connect

An assessment of needs for the manufacturing of ceramic gas turbine components was undertaken to provide a technical basis for planning R&D activities to support DOE`s gas turbine programs. The manufacturing processes for ceramic turbine engine components were examined from design through final inspection and testing. The following technology needs were identified: Concurrent engineering early in the design phase to develop ceramic components that are more readily manufacturable. Additional effort in determining the boundaries of acceptable design dimensions and tolerances through experimental and/or analytical means. Provision, by the designer, of a CAD based model of the component early in the design cycle. Standardization in the way turbine components are dimensioned and toleranced, and in the way component datum features are defined. Rapid means of fabricating hard tooling, including intelligent systems for design of tooling and rapid prototyping of tooling. Determination of process capabilities by manufacturing significant numbers of parts. Development of more robust ceramic manufacturing processes which are tolerant of process variations. Development of intelligent processing as a means of controlling yield and quality of components. Development of computer models of key manufacturing steps, such as green forming to reduce the number of iterations required to manufacture intolerance components. Development of creep feed or other low-damage precision grinding for finish machining of components. Improved means of fixturing components for finish machining. Fewer and lower-cost final inspection requirements. Standard procedures, including consistent terminology and analytical software for dimensional inspection of components. Uniform data requirements from the US turbine engine companies. An agreed-upon system of naming ceramic materials and updating the name when changes have been made.

Johnson, D.R.; McSpadden, S.B.; Morris, T.O.; Pasto, A.E.

1995-11-01T23:59:59.000Z

Note: This page contains sample records for the topic "activity manufacturing agriculture" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Biomass Energy and Agricultural Sustainability  

E-Print Network (OSTI)

Biomass Energy and Agricultural Sustainability Stephen Kaffka Department of Plant Sciences University of California, Davis & California Biomass Collaborative February 2008 #12;E x p e c t e d d u r 9 ) ---------Biomass era----------- --?????????? #12;By 2025, every source of energy

California at Davis, University of

362

Current information technology needs of small to medium sized apparel manufacturers and contractors  

Science Conference Proceedings (OSTI)

This report documents recent efforts of the American Textile Partnership (AMTEX) Demand Activated Manufacturing Architecture (DAMA) Project to address needs that are characterized of small to medium sized apparel manufactures and contractors. Background on the AMTEX/DAMA project and objectives for this specific efforts are discussed.

Wipple, C.; Vosti, E.

1997-11-01T23:59:59.000Z

363

Ohio Advanced Energy Manufacturing Center  

SciTech Connect

The program goal of the Ohio Advanced Energy Manufacturing Center (OAEMC) is to support advanced energy manufacturing and to create responsive manufacturing clusters that will support the production of advanced energy and energy-efficient products to help ensure the nation's energy and environmental security. This goal cuts across a number of existing industry segments critical to the nation's future. Many of the advanced energy businesses are starting to make the transition from technology development to commercial production. Historically, this transition from laboratory prototypes through initial production for early adopters to full production for mass markets has taken several years. Developing and implementing manufacturing technology to enable production at a price point the market will accept is a key step. Since these start-up operations are configured to advance the technology readiness of the core energy technology, they have neither the expertise nor the resources to address manufacturing readiness issues they encounter as the technology advances toward market entry. Given the economic realities of today's business environment, finding ways to accelerate this transition can make the difference between success and failure for a new product or business. The advanced energy industry touches a wide range of industry segments that are not accustomed to working together in complex supply chains to serve large markets such as automotive and construction. During its first three years, the Center has catalyzed the communication between companies and industry groups that serve the wide range of advanced energy markets. The Center has also found areas of common concern, and worked to help companies address these concerns on a segment or industry basis rather than having each company work to solve common problems individually. EWI worked with three industries through public-private partnerships to sew together disparate segments helping to promote overall industry health. To aid the overall advanced energy industry, EWI developed and launched an Ohio chapter of the non-profit Advanced Energy Economy. In this venture, Ohio joins with six other states including Colorado, Connecticut, Illinois, Maine, Massachusetts, New Hampshire, Rhode Island and Vermont to help promote technologies that deliver energy that is affordable, abundant and secure. In a more specific arena, EWI's advanced energy group collaborated with the EWI-run Nuclear Fabrication Consortium to promote the nuclear supply chain. Through this project EWI has helped bring the supply chain up to date for the upcoming period of construction, and assisted them in understanding the demands for the next generation of facilities now being designed. In a more targeted manner, EWI worked with 115 individual advanced energy companies that are attempting to bring new technology to market. First, these interactions helped EWI develop an awareness of issues common to companies in different advanced energy sectors. By identifying and addressing common issues, EWI helps companies bring technology to market sooner and at a lower cost. These visits also helped EWI develop a picture of industry capability. This helped EWI provide companies with contacts that can supply commercial solutions to their new product development challenges. By providing assistance in developing supply chain partnerships, EWI helped companies bring their technology to market faster and at a lower cost than they might have been able to do by themselves. Finally, at the most granular level EWI performed dedicated research and development on new manufacturing processes for advanced energy. During discussions with companies participating in advanced energy markets, several technology issues that cut across market segments were identified. To address some of these issues, three crosscutting technology development projects were initiated and completed with Center support. This included reversible welds for batteries and high temperature heat exchangers. It also included a novel advanced weld trainer that EWI

Kimberly Gibson; Mark Norfolk

2012-07-30T23:59:59.000Z

364

Ohio Advanced Energy Manufacturing Center  

Science Conference Proceedings (OSTI)

The program goal of the Ohio Advanced Energy Manufacturing Center (OAEMC) is to support advanced energy manufacturing and to create responsive manufacturing clusters that will support the production of advanced energy and energy-efficient products to help ensure the nation's energy and environmental security. This goal cuts across a number of existing industry segments critical to the nation's future. Many of the advanced energy businesses are starting to make the transition from technology development to commercial production. Historically, this transition from laboratory prototypes through initial production for early adopters to full production for mass markets has taken several years. Developing and implementing manufacturing technology to enable production at a price point the market will accept is a key step. Since these start-up operations are configured to advance the technology readiness of the core energy technology, they have neither the expertise nor the resources to address manufacturing readiness issues they encounter as the technology advances toward market entry. Given the economic realities of today's business environment, finding ways to accelerate this transition can make the difference between success and failure for a new product or business. The advanced energy industry touches a wide range of industry segments that are not accustomed to working together in complex supply chains to serve large markets such as automotive and construction. During its first three years, the Center has catalyzed the communication between companies and industry groups that serve the wide range of advanced energy markets. The Center has also found areas of common concern, and worked to help companies address these concerns on a segment or industry basis rather than having each company work to solve common problems individually. EWI worked with three industries through public-private partnerships to sew together disparate segments helping to promote overall industry health. To aid the overall advanced energy industry, EWI developed and launched an Ohio chapter of the non-profit Advanced Energy Economy. In this venture, Ohio joins with six other states including Colorado, Connecticut, Illinois, Maine, Massachusetts, New Hampshire, Rhode Island and Vermont to help promote technologies that deliver energy that is affordable, abundant and secure. In a more specific arena, EWI's advanced energy group collaborated with the EWI-run Nuclear Fabrication Consortium to promote the nuclear supply chain. Through this project EWI has helped bring the supply chain up to date for the upcoming period of construction, and assisted them in understanding the demands for the next generation of facilities now being designed. In a more targeted manner, EWI worked with 115 individual advanced energy companies that are attempting to bring new technology to market. First, these interactions helped EWI develop an awareness of issues common to companies in different advanced energy sectors. By identifying and addressing common issues, EWI helps companies bring technology to market sooner and at a lower cost. These visits also helped EWI develop a picture of industry capability. This helped EWI provide companies with contacts that can supply commercial solutions to their new product development challenges. By providing assistance in developing supply chain partnerships, EWI helped companies bring their technology to market faster and at a lower cost than they might have been able to do by themselves. Finally, at the most granular level EWI performed dedicated research and development on new manufacturing processes for advanced energy. During discussions with companies participating in advanced energy markets, several technology issues that cut across market segments were identified. To address some of these issues, three crosscutting technology development projects were initiated and completed with Center support. This included reversible welds for batteries and high temperature heat exchangers. It also included a novel advanced weld trainer that EWI

Kimberly Gibson; Mark Norfolk

2012-07-30T23:59:59.000Z

365

Energy-Saving Homes, Buildings, and Manufacturing | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Energy-Saving Homes, Buildings, and Manufacturing Energy-Saving Homes, Buildings, and Manufacturing Buildings Homes Advanced Manufacturing Government Energy Management Buildings...

366

Energy Information Administration (EIA)- Manufacturing Energy Consumption  

Gasoline and Diesel Fuel Update (EIA)

Steel Industry Analysis Brief Change Topic: Steel | Chemical Steel Industry Analysis Brief Change Topic: Steel | Chemical JUMP TO: Introduction | Energy Consumption | Energy Expenditures | Producer Prices and Production | Energy Intensity | Energy Management Activities Introduction The steel industry is critical to the U.S. economy. Steel is the material of choice for many elements of construction, transportation, manufacturing, and a variety of consumer products. It is the backbone of bridges, skyscrapers, railroads, automobiles, and appliances. Most grades of steel used today - particularly high-strength steels that are lighter and more versatile - were not available a decade ago.1 The U.S. steel industry (including iron production) relies significantly on natural gas and coal coke and breeze for fuel, and is one of the largest

367

Energy Information Administration (EIA)- Manufacturing Energy Consumption  

Gasoline and Diesel Fuel Update (EIA)

Chemical Industry Analysis Brief Change Topic: Steel | Chemical Chemical Industry Analysis Brief Change Topic: Steel | Chemical JUMP TO: Introduction | Energy Consumption | Energy Expenditures | Producer Prices and Production | Energy Intensity | Energy Management Activities | Fuel Switching Capacity Introduction The chemical industries are a cornerstone of the U.S. economy, converting raw materials such as oil, natural gas, air, water, metals, and minerals into thousands of various products. Chemicals are key materials for producing an extensive assortment of consumer goods. They are also crucial materials in creating many resources that are essential inputs to the numerous industries and sectors of the U.S. economy.1 The manufacturing sector is classified by the North American Industry Classification System (NAICS) of which the chemicals sub-sector is NAICS

368

Y Mr. Carl Balonick Marden Manufacturing Co.  

Office of Legacy Management (LM)

Ic , 1 ! Ic , 1 ! : /zq-y@-oa? Washington, DC 20545 )$4&/f I:( Y Mr. Carl Balonick Marden Manufacturing Co. 5823 North Ravenswood Chicago, Illinois 60611 ' . , . . b '.,) : - ,_ ,I_ _ _ " 's k.&&*f%d+--g*"; -5 "d ? 4~: .,. t I*. )' Dear Mr. Balonick: As you are aware, the Department of Energy is implementing a radiological survey program to determine the radiological conditions at sites that were formerly used by the Department's predecessor agencies. One such site is Ravenswood Venture site (formerly Quality Hardware & Machine Corporation) in Chicago, Illinois. This site was involved in canning unbonded uranium slugs in the mid-1940's in support of Manhattan Engineer District (MED) operations. The uranium slug canning activity was relatively small scale and appears to

369

Research on advanced photovoltaic manufacturing technology  

DOE Green Energy (OSTI)

This report outlines opportunities for significantly advancing the scale and economy of high-volume manufacturing of high-efficiency photovoltaic (PV) modules. We propose to pursue a concurrent effort to advance existing crystalline silicon module manufacturing technology and to implement thin film CuInSe{sub 2} (CIS) module manufacturing. This combination of commercial-scale manufacturing of high-efficiency crystalline silicon modules and of pilot-scale manufacturing of low-cost thin film CIS technology will support continued, rapid growth of the US PV industry.

Jester, T.; Eberspacher, C. (Siemens Solar Industries, Camarillo, CA (United States))

1991-11-01T23:59:59.000Z

370

Manufacturing Science and Technology: Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

Molding, Thermoforming & Compounding Molding, Thermoforming & Compounding PDF format (89 kb) The Manufacturing Science & Technology Center helps customers choose the best materials and techniques for their product by providing a variety of conformal coatings, thermoforming, and compounding materials using established or custom designed processes. The department provides consulting services for injection molding and rubber compounding projects. Capabilities: Thermoforming: Processing thermoplastics such as polycarbonate, polymethyl methacrylate, polypropylene polystyrene, and ABS; producing holding trays, protective caps, and custom covers Injection Molding Consultation: Designing your part to be injection molded, helping you choose the best material for your application, and supporting your interface with injection molding companies

371

Process for manufacturing tantalum capacitors  

DOE Patents (OSTI)

A process for manufacturing tantalum capacitors in which microwave energy is used to sinter a tantalum powder compact in order to achieve higher surface area and improved dielectric strength. The process comprises cold pressing tantalum powder with organic binders and lubricants to form a porous compact. After removal of the organics, the tantalum compact is heated to 1,300 to 2,000 C by applying microwave radiation. Said compact is then anodized to form a dielectric oxide layer and infiltrated with a conductive material such as MnO[sub 2]. Wire leads are then attached to form a capacitor to said capacitor is hermetically packaged to form the finished product.

Lauf, R.J.; Holcombe, C.E.; Dykes, N.L.

1993-02-02T23:59:59.000Z

372

Process for manufacturing tantalum capacitors  

DOE Patents (OSTI)

A process for manufacturing tantalum capacitors in which microwave energy is used to sinter a tantalum powder compact in order to achieve higher surface area and improved dielectric strength. The process comprises cold pressing tantalum powder with organic binders and lubricants to form a porous compact. After removal of the organics, the tantalum compact is heated to 1300.degree. to 2000.degree. C. by applying microwave radiation. Said compact is then anodized to form a dielectric oxide layer and infiltrated with a conductive material such as MnO.sub.2. Wire leads are then attached to form a capacitor to said capacitor is hermetically packaged to form the finished product.

Lauf, Robert J. (Oak Ridge, TN); Holcombe, Cressie E. (Knoxville, TN); Dykes, Norman L. (Oak Ridge, TN)

1993-01-01T23:59:59.000Z

373

Manufacturing method of photonic crystal  

DOE Patents (OSTI)

A manufacturing method of a photonic crystal is provided. In the method, a high-refractive-index material is conformally deposited on an exposed portion of a periodic template composed of a low-refractive-index material by an atomic layer deposition process so that a difference in refractive indices or dielectric constants between the template and adjacent air becomes greater, which makes it possible to form a three-dimensional photonic crystal having a superior photonic bandgap. Herein, the three-dimensional structure may be prepared by a layer-by-layer method.

Park, In Sung; Lee, Tae Ho; Ahn, Jin Ho; Biswas, Rana; Constant, Kristen P.; Ho, Kai-Ming; Lee, Jae-Hwang

2013-01-29T23:59:59.000Z

374

American Wind Manufacturing | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

American Wind Manufacturing American Wind Manufacturing American Wind Manufacturing Addthis 1 of 9 Nordex USA -- a global manufacturer of wind turbines -- delivered and installed turbine components for the Power County Wind Farm, shown here, in Idaho. Image: Nordex USA, Inc. Date taken: 2012-03-05 14:38 2 of 9 Power County Wind Farm - Power County, Idaho. Image: Nordex USA, Inc. Date taken: 2012-03-07 16:16 3 of 9 Power County Wind Farm - Power County, Idaho. Image: Nordex USA, Inc. Date taken: 2012-03-05 17:14 4 of 9 Nordex USA manufacturing facility - Jonesboro, Arkansas. Image: Nordex USA, Inc. Date taken: 2011-05-02 13:55 5 of 9 Nordex USA flagship manufacturing facility in Jonesboro, Arkansas. Image: Nordex USA, Inc. Date taken: 2011-05-02 14:11 6 of 9 Nordex USA flagship manufacturing facility in Jonesboro, Arkansas.

375

Definition and analysis of new agricultural farm energetic indicators using spatial OLAP  

Science Conference Proceedings (OSTI)

Agricultural energy consumption is an important environmental and social issue. Several diagnoses have been proposed to define indicators for analyzing energy consumption at large scale of agricultural farm activities (year, farm, family of production, ... Keywords: energetic indicators, spatial OLAP, spatial data warehouses

Sandro Bimonte; Kamal Boulil; Jean-Pierre Chanet; Marilys Pradel

2012-06-01T23:59:59.000Z

376

CRC handbook of agricultural energy potential of developing countries  

Science Conference Proceedings (OSTI)

This book provides background information on the agroenergetic potential of 65 countries and offers summaries of major crops planted, total area planted, yield per hectare, and total production. Total land area is categorized as to agriculture, forest, and woodland, and is discussed with demographic statistics for each country. The potential for agricultural by-products and biomass to contribute to energy availability is explored, with reference to each major crop. Vegetation and/or economic activity, or soil maps are presented for most countries, as are climatic data, with crop yields and residues which are compared with production elsewhere.

Duke, J.A.

1986-01-01T23:59:59.000Z

377

Before the Senate Agriculture, Nutrition, and Forestry | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Agriculture, Nutrition, and Forestry Before the Senate Agriculture, Nutrition, and Forestry Before the Senate Agriculture, Nutrition, and Forestry By: Richard Newell, Administrator...

378

Manufacturing Energy Consumption Survey (MECS) - U.S. Energy ...  

U.S. Energy Information Administration (EIA)

Crude oil, gasoline ... Manufacturing Energy Consumption Survey (MECS ... transportation, manufacturing, and a variety of consumer products. It is the ...

379

Sustainability in Additive Manufacturing and Energy Consumption in ...  

Science Conference Proceedings (OSTI)

Symposium, Green Technologies for Materials Manufacturing and Processing IV. Presentation Title, Sustainability in Additive Manufacturing and Energy ...

380

On the Manufacturing of Lattice Structures by Electron Beam Melting  

Science Conference Proceedings (OSTI)

About this Abstract. Meeting, Materials Science & Technology 2012. Symposium, Additive Manufacturing of Metals. Presentation Title, On the Manufacturing of ...

Note: This page contains sample records for the topic "activity manufacturing agriculture" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

NAMII Announces Second Call for Additive Manufacturing Projects  

Science Conference Proceedings (OSTI)

Sep 6, 2013 ... The National Additive Manufacturing Innovation Institute (NAMII) has announced its second call for additive manufacturing applied research ...

382

Two Manufacturers, a Water Treatment Company and a Bank ...  

Science Conference Proceedings (OSTI)

... today announced two manufacturers, a water ... America's largest, independent manufacturer and marketer of ... heavy duty, and off-highway vehicles. ...

2011-07-13T23:59:59.000Z

383

Connecting Small Manufacturers with the Capital Needed to ...  

Science Conference Proceedings (OSTI)

... the exception of vehicle or equipment ... Grant Advanced Technology Vehicles Loan Manufacturer ... Small Manufacturers Capital Access Inventory and ...

2013-07-31T23:59:59.000Z

384

Slide 1 of 19NCA -Agriculture with a California Focus Agriculture with a California  

E-Print Network (OSTI)

Slide 1 of 19NCA - Agriculture with a California Focus Agriculture with a California Focus (NCA Draft Findings) Richard Grotjahn Professor of Climate Dynamics University of California, Davis 6 March 2013 #12;Slide 2 of 19NCA - Agriculture with a California Focus Authors of Chapter 6: Agriculture

Grotjahn, Richard

385

Manufacturing Science and Technology: Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

Sol-Gel Glasses Sol-Gel Glasses PDF format (74 kb) Sol Gel Sol Gel Coating with Sol-Gel Glasses Coating with Sol-Gel Glasses The Manufacturing Science & Technology Center conducts process development and scale-up of ceramic and glass materials prepared by the sol-gel process. Sol-gel processing uses solutions prepared at low temperature rather than high temperature powder processing to make materials with controlled properties. A precursor sol-gel solution (sol) is either poured into a mold and allowed to gel or is diluted and applied to a substrate by spinning, dipping, spraying, electrophoresis, inkjet printing or roll coating. Controlled drying of the wet gel results in either a ceramic or glass bulk part or a thin film on a glass, plastic, ceramic or metal substrate.

386

Manufacturing Consumption of Energy 1994  

U.S. Energy Information Administration (EIA) Indexed Site

3 3 Energy Information Administration/Manufacturing Consumption of Energy 1994 Glossary Anthracite: A hard, black, lustrous coal containing a high percentage of fixed carbon and a low percentage of volatile matter. Often referred to as hard coal. Barrel: A volumetric unit of measure equivalent to 42 U.S. gallons. Biomass: Organic nonfossil material of biological origin constituting a renewable energy source. Bituminous Coal: A dense, black coal, often with well-defined bands of bright and dull material, with a moisture content usually less than 20 percent. Often referred to as soft coal. It is the most common coal. Blast Furnace: A shaft furnace in which solid fuel (coke) is burned with an air blast to smelt ore in a continuous operation. Blast Furnace Gas: The waste combustible gas generated in a blast furnace when iron ore is being reduced with coke to

387

Manufacturing Science and Technology: Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

LTCC multi-chip module LTCC multi-chip module A high density LTCC multi-chip module Electronic Packaging PDF format (150 kb) The Electronic Packaging technologies in the Thin Film, Vacuum, & Packaging Department are a resource for all aspects of microelectronic packaging. From design and layout to fabrication of prototype samples, the staff offers partners the opportunity for concurrent engineering and development of a variety of electronic packaging concepts. This includes assistance in selecting the most appropriate technology for manufacturing, analysis of performance characteristics and development of new and unique processes. Capabilities: Network Fabrication Low Temperature Co-Fired Ceramic (LTCC) Thick Film Thin Film Packaging and Assembly Chip Level Packaging MEMs Packaging

388

Means of manufacturing annular arrays  

DOE Patents (OSTI)

A method is described for manufacturing an annular acoustic transducer array from a plate of transducer material, which enables production of precision aligned arrays at low cost. The circular plate is sawed along at least two lines that are radial to the axis of the plate. At steps along each radial cut, the plate is rotated first in one direction and then in an opposite direction by a predetermined angle such as slightly less than 90/sup 0/. The cuts result in the forming of several largely ring-shaped lands, each largely ring-shaped land being joined to the other rings of different radii by thin portions of the plate, and each ring being cut into segments. The bridges that join different rings hold the transducer together until it can be mounted on a lens.

Day, R.A.

1985-10-10T23:59:59.000Z

389

Optimizing Manufactured Housing Energy Use  

E-Print Network (OSTI)

In partnership with the Florida Solar Energy Center (FSEC), two manufactured homes were located on North Carolina A&T State University's campus in Greensboro, NC and used in a side-by-side energy consumption comparison. One of the homes was built to the basic HUD code standard and the other was constructed with features expected to produce a home that was 50% more energy efficient. FSEC and NCATSU began monitoring energy performance in both homes. In addition, the performance of each unit was evaluated using a DOE2 based computer energy analysis program developed by FSEC. A comparison of the performance of the units shows a measured energy savings in the more energy efficient unit of 52% for the Heating, cooling, and DHW energy use. This compares well with the energy savings predicted by the FSEC Energy Gauge program of 57%, even when accounting for the warmer than usual winter experienced during the testing period.

McGinley, W. M.; Jones, A.; Turner, C.; Chandra, S.; Beal, D.; Parker, D. S.; Moyer, N.; McIlvaine, J.

2004-01-01T23:59:59.000Z

390

Photovoltaic manufacturing technology, Phase 1  

DOE Green Energy (OSTI)

This report describes existing integrated processes for solar cell manufacturing and lists as the primary opportunity for improvement the following areas: low-cost silicon sheets with improved characteristics; improved large-scale and automated solar cell processes that can lead to cell efficiencies in the range of 14% (encapsulated) for direct-cast wafers; improved handling and lamination of large-area modules for the emerging utility market. The proposed solutions can lead to finished module costs on the order of $1.55 per square meter or a selling price of less than $2.00/Watt. The problems that may be considered generic to the industry and that have been addressed in this work are as follows: gettering and passivation of silicon wafers; spray-on passivation layers; dual antireflection coatings; ink-jet printing of metallizations; and automated handling of large-area modules and associated vertical lamination. 14 refs.

Somberg, H. (Global Photovoltaic Specialists, Inc., Canoga Park, CA (United States))

1991-11-01T23:59:59.000Z

391

Wind Turbine Manufacturing Process Monitoring  

SciTech Connect

To develop a practical inline inspection that could be used in combination with automated composite material placement equipment to economically manufacture high performance and reliable carbon composite wind turbine blade spar caps. The approach technical feasibility and cost benefit will be assessed to provide a solid basis for further development and implementation in the wind turbine industry. The program is focused on the following technology development: (1) Develop in-line monitoring methods, using optical metrology and ultrasound inspection, and perform a demonstration in the lab. This includes development of the approach and performing appropriate demonstration in the lab; (2) Develop methods to predict composite strength reduction due to defects; and (3) Develop process models to predict defects from leading indicators found in the uncured composites.

Waseem Faidi; Chris Nafis; Shatil Sinha; Chandra Yerramalli; Anthony Waas; Suresh Advani; John Gangloff; Pavel Simacek

2012-04-26T23:59:59.000Z

392

High Pressure Hydrogen Tank Manufacturing  

NLE Websites -- All DOE Office Websites (Extended Search)

Workshop Workshop High Pressure Hydrogen Tank Manufacturing Mark Leavitt Quantum Fuel Systems Technologies Worldwide, Inc. August 11, 2011 This presentation does not contain any proprietary, confidential, or otherwise restricted information History of Innovations... Announced breakthrough in all-composite lightweight, high capacity, low-cost fuel storage technologies. * Developed a series of robust, OEM compatible electronic control products. Developed H 2 storage system for SunLine Tran-sit Hythane® bus. Awarded patent for integrated module including in-tank regulator * Developed high efficiency H 2 fuel storage systems for DOE Future Truck programs Developed H 2 storage and metering system for Toyota's FCEV platform. First to certify 10,000 psi systems in Japan

393

Manufacturing Science and Technology: Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

Electro Microfluidic Dual In-line Package (EMDIP) Electro Microfluidic Dual In-line Package (EMDIP) PDF format (115 kb) EMDIP diagram EMDIP Diagram Microfluidics is experiencing explosive growth in new product developments. Already there are many commercial applications for electro microfluidic devices such as chemical sensors, biological sensors, and drop ejectors for both printing and chemical analysis. The number of surface micromachined microfluidic devices is likely to increase. Manufacturing efficiency and integration of microfluidics with electronics will become important. In order to realize applications for these devices, an efficient method for packaging microfluidic devices is needed. Responding to this need, researchers at Sandia developed the Electro Microfluidic Dual In-Line Package (EMDIP) and the Fluidic Printed Wiring Board (FPWB).

394

Manufacturing Consumption of Energy 1994  

U.S. Energy Information Administration (EIA) Indexed Site

A24. A24. Total Inputs of Energy for Heat, Power, and Electricity Generation by Program Sponsorship, Industry Group, Selected Industries, and Type of Energy- Management Program, 1994: Part 1 (Estimates in Trillion Btu) See footnotes at end of table. Energy Information Administration/Manufacturing Consumption of Energy 1994 285 SIC Management Any Type of Sponsored Self-Sponsored Sponsored Sponsored Code Industry Group and Industry Program Sponsorship Involvement Involvement Involvement Involvement a No Energy Electric Utility Government Third Party Type of Sponsorship of Management Programs (1992 through 1994) RSE Row Factors Federal, State, or Local RSE Column Factors: 0.7 1.1 1.0 0.7 1.9 0.9 20-39 ALL INDUSTRY GROUPS Participation in One or More of the Following Types of Programs . .

395

Manufacturing Consumption of Energy 1994  

U.S. Energy Information Administration (EIA) Indexed Site

A9. A9. Total Inputs of Energy for Heat, Power, and Electricity Generation by Fuel Type, Census Region, and End Use, 1994: Part 1 (Estimates in Btu or Physical Units) See footnotes at end of table. Energy Information Administration/Manufacturing Consumption of Energy 1994 166 End-Use Categories (trillion Btu) kWh) (1000 bbl) (1000 bbl) cu ft) (1000 bbl) tons) (trillion Btu) Total (million Fuel Oil Diesel Fuel (billion LPG (1000 short Other Net Distillate Natural and Electricity Residual Fuel Oil and Gas Breeze) a b c Coal (excluding Coal Coke d RSE Row Factors Total United States RSE Column Factors: NF 0.5 1.3 1.4 0.8 1.2 1.2 NF TOTAL INPUTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16,515 778,335 70,111 26,107 5,962 25,949 54,143 5,828 2.7 Indirect Uses-Boiler Fuel . . . . . . . . . . . . . . . . . . . . . . . --

396

Manufacturing Consumption of Energy 1994  

U.S. Energy Information Administration (EIA) Indexed Site

0. 0. Number of Establishments that Actually Switched Fuels from Natural Gas to Residual Fuel Oil, by Industry Group and Selected Industries, 1994 369 Energy Information Administration/Manufacturing Consumption of Energy 1994 SIC Residual Fuel Oil Total Code Industry Group and Industry (billion cu ft) Factors (counts) (counts) (percents) (counts) (percents) a Natural Gas Switchable to Establishments RSE Row Able to Switch Actually Switched RSE Column Factors: 1.3 0.1 1.4 1.7 1.6 1.8 20 Food and Kindred Products . . . . . . . . . . . . . . . . . . . . . . . . . 81 14,698 702 4.8 262 1.8 5.6 2011 Meat Packing Plants . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 759 23 3.0 10 1.3 9.0 2033 Canned Fruits and Vegetables . . . . . . . . . . . . . . . . . . . . . 9 531 112 21.2 33 6.2 11.6 2037 Frozen Fruits and Vegetables . . . . . . . . . . . . . . . . . . . . . . 5 232 Q 5.3

397

Advanced Manufacturing Office: MotorMaster+  

NLE Websites -- All DOE Office Websites (Extended Search)

MotorMaster+ to MotorMaster+ to someone by E-mail Share Advanced Manufacturing Office: MotorMaster+ on Facebook Tweet about Advanced Manufacturing Office: MotorMaster+ on Twitter Bookmark Advanced Manufacturing Office: MotorMaster+ on Google Bookmark Advanced Manufacturing Office: MotorMaster+ on Delicious Rank Advanced Manufacturing Office: MotorMaster+ on Digg Find More places to share Advanced Manufacturing Office: MotorMaster+ on AddThis.com... MotorMaster+ This photo shows the inner workings of an industrial electric motor with gears. In the lower left hand corner are the words "MotorMaster+" and underneath are the words "Motor-Driven Systems." Download MotorMaster+ now! Version: 4.01.01 Release Date: September 21, 2010 Release Notes Metric Unit Measurements: No

398

Advanced manufacturing: Technology and international competitiveness  

SciTech Connect

Dramatic changes in the competitiveness of German and Japanese manufacturing have been most evident since 1988. All three countries are now facing similar challenges, and these challenges are clearly observed in human capital issues. Our comparison of human capital issues in German, Japanese, and US manufacturing leads us to the following key judgments: Manufacturing workforces are undergoing significant changes due to advanced manufacturing technologies. As companies are forced to develop and apply these technologies, the constituency of the manufacturing workforce (especially educational requirements, contingent labor, job content, and continuing knowledge development) is being dramatically and irreversibly altered. The new workforce requirements which result due to advanced manufacturing require a higher level of worker sophistication and responsibility.

Tesar, A.

1995-02-01T23:59:59.000Z

399

Agriculture - Noise and shocking investigation  

Science Conference Proceedings (OSTI)

This power quality (PQ) case study presents an investigation of noise and shocking from the telephone line at a horse farm. The investigation revealed that the noise was caused by an arching connection and vegetation along the fence. Also the charger's grounding system was not installed properly. Recommendations were made to the customer to reinstall the charger's ground system to manufacturer's specification and use an AM radio to find the loose connection along the fence.

2003-12-31T23:59:59.000Z

400

Analysis of the research and development effort in the private sector to reduce energy consumption in irrigated agriculture  

SciTech Connect

Manufacturers of irrigation equipment perform research and development in an effort to improve or maintain their position in a very competitive market. The market forces and conditions that create the intense competition and provide incentive for invention are described. Particular emphasis is placed on the market force of increased energy costs, but the analysis is developed from the perspective that energy is but one of many inputs to agricultural production. The analysis is based upon published literature, patent activity profiles, microeconomic theory, and conversations with many representatives of the irrigation industry. The published literature provides an understanding of the historical development of irrigation technology, a description of the industry's structure, and various data, which were important for the quantitative analyses. The patent activity profiles, obtained from the US Patent Office, provided details of patent activity within the irrigation industry over the past decade. Microeconomic theory was used to estimate industry-wide research and development expenditures on energy-conserving products. The results of these analyses were then compared with the insights gained from conversations with the industry representatives.

Rogers, E.A.; Cone, B.W.

1980-09-01T23:59:59.000Z

Note: This page contains sample records for the topic "activity manufacturing agriculture" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Clean Energy Manufacturing Resources - Technology Feasibility | Department  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Feasibility Feasibility Clean Energy Manufacturing Resources - Technology Feasibility Clean Energy Manufacturing Resources - Technology Feasibility Find resources to help you evaluate the feasibility of your idea for a new clean energy technology or product. For determining feasibility, areas to consider include U.S. Department of Energy (DOE) priorities, licensing, R&D funding, and strategic project partnerships. For more resources, see the Clean Energy Manufacturing Federal Resource Guide. Learn About U.S. Department of Energy Priorities Advanced Manufacturing Office Plans - features information on analysis, plan implementations, and commercial outcomes. Bioenergy Technologies Office Plans - includes technology roadmaps, multiyear program plans, analysis, and more.

402

Advanced Manufacturing Jobs and Innovation Accelerator Challenge |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Technical Assistance » Advanced Manufacturing Jobs and Innovation Technical Assistance » Advanced Manufacturing Jobs and Innovation Accelerator Challenge Advanced Manufacturing Jobs and Innovation Accelerator Challenge October 10, 2013 - 12:01pm Addthis The Advanced Manufacturing Jobs and Innovation Accelerator Challenge (Accelerator) is a multi-agency sponsored competition established to enhance existing regional networks of firms and institutions that accelerate technology-related innovation, business formation, and job creation. Funding provided to these regional networks (also called clusters) help academia, utilities, local governments, and private industry and investors expand partnerships, share strategic information more efficiently, and reduce costs by leveraging existing assets and resources (like physical facilities and equipment).

403

Manufacturing Licenses Available | Tech Transfer | ORNL  

NLE Websites -- All DOE Office Websites (Extended Search)

Manufacturing Manufacturing SHARE Manufacturing 200401490 Production of Materials with Superior Properties Utilizing High Magnetic Field (Related ID # 200501531, 200701867, 200802085, 200902312, 201002455, 201102675) 200701900 Robust Digital Valve for Prosthetic Finger, Microsurgery, Robotics (Related ID # 200701983, 200802088) 200701972 Manufacturing Biodiesel from Triglycerides (Related ID # 200702012, 200802186) 200701983 Meso-scale Fluidic Digital Valve 200802083 A Hydraulic Flow Control Device by Means of a Digital Poppet Valve 200802088 Miniature shape memory alloy fluid control valve 200902224 Glass Drawing for Wire Arrays 200902231 Nano/Micro Vacuum Triodes Using Glass Fiber Drawing Methods 200902291 Method of Machining Carbon and Graphite foams 200902309 Multi-Winding Homopolar Electric Machine Offers

404

Designing a National Network for Manufacturing Innovation  

Science Conference Proceedings (OSTI)

... Advanced Manufacturing National Program Office (housed at DOC ... “20% of output of 3D printers is now ... By 2020 it may be 50%.” – The Economist ...

2013-10-30T23:59:59.000Z

405

FACTSHEET: Next Generation Power Electronics Manufacturing Innovation...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

today announces the selection of North Carolina State University to lead a public-private manufacturing innovation institute for next generation power electronics....

406

Digital Manufacturing and Design Innovation (DMDI) Institute  

Science Conference Proceedings (OSTI)

... automation, sensing and control with a transformed manufacturing workforce at ... in the marketplace, and ensuring the cyber physical security of the ...

2013-05-08T23:59:59.000Z

407

Mechanical Properties of Additive Manufactured Materials and ...  

Science Conference Proceedings (OSTI)

Oct 18, 2011 ... Recently, ONR started a basic research program, cyber-enabled manufacturing systems (CeMS), that adds a computational “architecture” layer ...

408

Advanced Manufacturing Office: Workforce Development and Training  

NLE Websites -- All DOE Office Websites (Extended Search)

Development and Training Professional Development Enhance your career by developing skills in manufacturing energy efficiency. A variety of opportunities and certifications are...

409

STATEMENT OF CONSIDERATIONS REQUEST BY MOTOROLA MANUFACTURING...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

and methods, such as production scheduling, automation, Computer Integrated Manufacture (CIM), quality control, materials inventory management and staffing that are necessary over...

410

Manufacturing Extension Partnership Awards Grant to Support ...  

Science Conference Proceedings (OSTI)

... “Our region is home to a significant asset and ... “SME manufacturers are true innovators and contribute substantial value to the region's economic ...

2010-09-28T23:59:59.000Z

411

Manufacturing Energy Consumption Survey (MECS) - Analysis ...  

U.S. Energy Information Administration (EIA)

The gross output for the petroleum and coal products subsector grew by about 3 percent, ... Manufacturing Energy Consumption Survey, MECS Definition of Fuel Use, ...

412

Solid Oxide Fuel Cell Manufacturing Overview  

NLE Websites -- All DOE Office Websites (Extended Search)

Hydrogen and Fuel Cell Technologies Manufacturing R&D Workshop August 11-12, 2011 Washington, DC Mark Richards, Eric Tang, Randy Petri Copyright 2011 Versa Power...

413

Data Analytics for Materials Science and Manufacturing  

Science Conference Proceedings (OSTI)

Surya R. Kalidindi, Georgia Institute of Technology ... and Manufacturing field in order to facilitate communication and collaboration among the various camps.

414

Upcoming Funding Opportunity for Tower Manufacturing and ...  

... and Lower Cost of Energy" intends to support partnerships leading to innovative designs and processes for wind turbine tower manufacturing and ...

415

Advanced Manufacturing Office: About the Office  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

collapse processing steps to lower the energy intensity of manufactured products. Next-Generation Materials cut energy use and provide new functional properties that enable...

416

Rationales and mechanisms for revitalizing US manufacturing ...  

Science Conference Proceedings (OSTI)

Page 1. Rationales and mechanisms for revitalizing US manufacturing R&D strategies Gregory Tassey © US Government 2010 ... R&D R&D 30.2% ...

2013-07-31T23:59:59.000Z

417

Advanced Manufacturing Technologies - Programmaster.org  

Science Conference Proceedings (OSTI)

... manufacturing technologies have been researched to develop new, efficient, green and near-zero waste approaches convert novel ... Just click on the button.

418

Advanced Manufacturing Office: State and Regional Partnerships  

NLE Websites -- All DOE Office Websites (Extended Search)

on State Policies that Impact Industrial Energy Efficiency In order to reduce industrial energy intensity and use, the Advanced Manufacturing Office (AMO) is forming partnerships...

419

VIDEO: Manufacture and Casting of Superalloys - TMS  

Science Conference Proceedings (OSTI)

Apr 27, 2007 ... This video gives a basic look at the equipment and operations in the manufacture and casting of superalloys. CITATION: Dr. Alan Partridge, ...

420

Solar Manufacturing Incentive Grant (SMIG) Program  

Energy.gov (U.S. Department of Energy (DOE))

Created in 1995 and administered jointly by the Virginia Department of Mines, Minerals and Energy, and the Virginia Economic Development Partnership, the Solar Manufacturing Incentive Grant (SMIG)...

Note: This page contains sample records for the topic "activity manufacturing agriculture" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Fundamentals in Laser Additive Manufacturing of Metals  

Science Conference Proceedings (OSTI)

Presentation Title, Fundamentals in Laser Additive Manufacturing of Metals. Author(s), Xinjin Cao, Yinan Zhang, Priti Wanjara, Mamoun Medraj. On-Site Speaker ...

422

NIST Selects First Chief Manufacturing Officer  

Science Conference Proceedings (OSTI)

... Molnar has served as a federal fellow in ... Office of Science and Technology Policy, and was ... manufacturing engineer and a certified energy manager ...

2011-07-19T23:59:59.000Z

423

Manage energy use in manufacturing | ENERGY STAR  

NLE Websites -- All DOE Office Websites (Extended Search)

Manage energy use in manufacturing Secondary menu About us Press room Contact Us Portfolio Manager Login Facility owners and managers Existing buildings Commercial new construction...

424

Characterization of Aluminum 3003 Ultrasonic Additive Manufacturing.  

E-Print Network (OSTI)

??Ultrasonic Additive Manufacturing (UAM) or ultrasonic consolidation is a solid state welding process in which thin foil layers are ultrasonically welded on top of one… (more)

Schick, David E.

2009-01-01T23:59:59.000Z

425

Advanced Manufacturing Office (Formerly Industrial Technologies...  

NLE Websites -- All DOE Office Websites (Extended Search)

energy intensity and efficiently direct energy to forming the product. Examples include additive manufacturing, selective heating, and out-of-the-autoclave composite...

426

EERE: Advanced Manufacturing Office Home Page  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

that meet market expectations. The Advanced Manufacturing Office (AMO) partners with industry, small business, universities, and other stakeholders to identify and invest in...

427

Perspectives on the Future of Manufacturing Engineering  

Science Conference Proceedings (OSTI)

... "Cool," he is reported to have told a Silicon Valley audience ... manufacturing applications will be as simple as connecting household appliances--one ...

2010-10-05T23:59:59.000Z

428

White Papers on Advanced Manufacturing Questions  

Science Conference Proceedings (OSTI)

... manufacturing, and sustainability needs at the design phase. ... the civilian sector has no single entity that ... who design and make wind turbines and ...

2013-07-31T23:59:59.000Z

429

Clean Energy Manufacturing Initiative Midwest Regional Summit...  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy Efficiency and Renewable Energy (EERE)'s Advanced Manufacturing Office works with industry, small business, universities, and other stakeholders to identify and invest in...

430

Climate VISION: Private Sector Initiatives: Chemical Manufacturing...  

Office of Scientific and Technical Information (OSTI)

Contact Us CHEMICAL MANUFACTURING Letters of IntentAgreements Work Plans GHG Information Energy Footprints Industry Analysis Briefs Resources & Links Industry Associations...

431

White House Office of Manufacturing Policy  

Science Conference Proceedings (OSTI)

... and private, federal, state, and regional.” The White House Office of ... has directed the Manufacturing Extension Partnership (MEP) housed within the ...

2011-12-12T23:59:59.000Z

432

Case Study 1 - Ventilation in Manufactured Houses  

Science Conference Proceedings (OSTI)

... Ventilation in Manufactured Houses. ... fan operation, an outdoor air intake duct installed on the forced-air return, and whole house exhaust with and ...

433

Manufacturing technology selection: a supply chain perspective.  

E-Print Network (OSTI)

??This thesis describes a technology selection framework for manufacturing technology selection. Technology selection has been identified as a major area of decision making in a… (more)

Farooq, Sami

2007-01-01T23:59:59.000Z

434

Department of Energy Joins with Manufacturers, Environmentalists...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

by law, is based on the consensus agreement reached by stakeholders which balances energy savings, consumer choice and manufacturer impact. We applaud DOE for its work and...

435

Advanced Manufacturing Office: About the Office  

NLE Websites -- All DOE Office Websites (Extended Search)

efficiency opportunities and adopt energy management best practices, including combined heat and power technology. As a result, manufacturers across vast industrial supply chain...

436

Advanced Manufacturing Office: About Technical Assistance  

NLE Websites -- All DOE Office Websites (Extended Search)

Application Centers (CEACs) provide outreach to manufacturers considering adoption of combined heat and power (CHP) technology-to save energy and money. Energy Experts and...

437

Advanced Manufacturing Office: Western Industrial Energy Efficiency...  

NLE Websites -- All DOE Office Websites (Extended Search)

Send a link to Advanced Manufacturing Office: Western Industrial Energy Efficiency & Combined Heat and Power Regional Dialogue Meeting to someone by E-mail Share Advanced...

438

Advanced Manufacturing Office: Research and Development  

NLE Websites -- All DOE Office Websites (Extended Search)

Demonstration Facility Critical Materials Hub Small Business Innovation Research Combined Heat and Power Next Generation Manufacturing Processes Next Generation Materials Quick...

439

Systems Integration for Manufacturing and Construction ...  

Science Conference Proceedings (OSTI)

... test methods and tools to prove correctness do not exist ... The National Strategic Plan doe Advanced Manufacturing identifies NIST as a key ...

2013-01-03T23:59:59.000Z

440

Climate VISION: Private Sector Initiatives: Automobile Manufacturers...  

Office of Scientific and Technical Information (OSTI)

Us AUTOMOBILE MANUFACTURERS Letters of IntentAgreements Work Plans GHG Information Energy Footprints Resources & Links Industry Associations FederalState Programs Technical...

Note: This page contains sample records for the topic "activity manufacturing agriculture" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

MIT Roundtable: “The Future of Manufacturing Innovation ...  

Science Conference Proceedings (OSTI)

... Suzanne Berger 2:15 The DARPA Perspective: The Pathway for Manufacturing Technology Advance – Ken Gabriel, Deputy Director, DARPA 2:30 ...

2013-07-31T23:59:59.000Z

442

Computer-Simulation-Assisted Lean Manufacturing Training.  

E-Print Network (OSTI)

??This thesis assesses the potential of using computer simulation to aid existing lean manufacturing training methods such as lecture and live simulation. An investigation of… (more)

Wang, Luoding 1970-

2005-01-01T23:59:59.000Z

443

Low Energy Ion Implantationin Semiconductor Manufacturing | U...  

Office of Science (SC) Website

Low Energy Ion Implantation in Semiconductor Manufacturing Nuclear Physics (NP) NP Home About Research Facilities Science Highlights Benefits of NP Spinoff Applications SBIRSTTR...

444

ENERGY STAR Resources for Small & Medium Manufactures  

NLE Websites -- All DOE Office Websites (Extended Search)

Small & Medium Manufacturers Guide to Energy Management June 2013 ENERGY STAR is a U.S. Environmental Protection Agency Program helping organizations and individuals fight climate...

445

Energy-Related Carbon Emissions in Manufacturing  

Reports and Publications (EIA)

Energy-related carbon emissions in manufacturing analysis and issues related to the energy use, energy efficiency, and carbon emission indicators.

Information Center

2000-05-31T23:59:59.000Z

446

Supplemental Comments of the Plumbing Manufacturers Instititute...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

of the Plumbing Manufacturers Institute Regarding the Economic Impacts of the Proposed Definition of "Showerhead," Docket No. EERE-2010-BT-NOA-0016 Letter Response from the...

447

The Geographic Concentration of Manufacturing Across the ...  

Science Conference Proceedings (OSTI)

... Howard, AR 44% 40% Rural Whitley, IN 44% 30% Metropolitan ... List of All Counties with Manufacturing Share above 20 percent, 2010 ... County ...

2013-07-31T23:59:59.000Z

448

Manufacturing Science and Technology: Creating Partnerships  

NLE Websites -- All DOE Office Websites (Extended Search)

be accessed by private-sector companies, universities, and other laboratories through a User Facility Agreement. The Manufacturing Science & Technology Organization is a User...

449

Low Energy Ion Implantationin Semiconductor Manufacturing | U...  

Office of Science (SC) Website

Low Energy Ion Implantation in Semiconductor Manufacturing Nuclear Physics (NP) NP Home About Research Facilities Science Highlights Benefits of NP Spinoff Applications Spinoff...

450

Manufacturing Energy Consumption Survey (MECS) - Analysis ...  

U.S. Energy Information Administration (EIA)

Table 2: Natural gas prices incurred by manufacturers, 2010, by region and establishment employment size (dollars per thousand cubic feet) Employment Size

451

Additive Manufacturing of Metals: A Review  

Science Conference Proceedings (OSTI)

AM could revolutionize many sectors of manufacturing by reducing component lead time, material waste, energy usage, and carbon footprint. Furthermore, AM ...

452

Forum on New Directions in Manufacturing  

Science Conference Proceedings (OSTI)

... of jumbo jets to the manufacture of massive earth-moving equipment ... do not participate in the development of standards at home or internationally. ...

2010-10-05T23:59:59.000Z

453

Additive Manufacturing of Materials - Programmaster.org  

Science Conference Proceedings (OSTI)

Presentation Title, Additive Manufacturing of Materials – Key Thrust Area of ORNL's ... Lubricants in Deposition and Machining of Wire and Arc Additive ...

454

American Wind Manufacturing | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

manufacturer of wind turbines -- delivered and installed turbine components for the Power County Wind Farm, shown here, in Idaho. Image: Nordex USA, Inc. Date taken: Mon,...

455

Reference Number PCR Kit Name Manufacturer Kit ...  

Science Conference Proceedings (OSTI)

Page 1. Reference Number PCR Kit Name Manufacturer Kit Description 1 Profiler Life Technologies AmpFlSTR® Profiler® (Part number 403038) ...

2013-11-20T23:59:59.000Z

456

National Additive Manufacturing Innovation Institute Launched  

Science Conference Proceedings (OSTI)

Aug 15, 2012 ... Known as the National Additive Manufacturing Innovation Institute (NAMII), the consortium was selected through a competitive process, led by ...

457

MEP: Helping Smaller Manufacturers Compete, Innovate, and ...  

Science Conference Proceedings (OSTI)

... Thermotion LLC (www.thermotion.com) designs and manufacturers electro-thermal ... was installed on several different ground vehicles used by all ...

2012-05-09T23:59:59.000Z

458

Session J: Processing and Product Manufacturing  

Science Conference Proceedings (OSTI)

Design and Manufacture of Fluidized Bed Reactor in Pilot Scale for Multiple ...... for the U.S. Department of Energy's National Nuclear Security Administration ...

459

Advanced Manufacturing Office: Better Plants Program Partners  

NLE Websites -- All DOE Office Websites (Extended Search)

has been recognized by the American Chemistry Council. Eaton Corporation NAICS 335, Electrical Equipment, Appliance, and Component Manufacturing Eck Industries NAICS 331, Primary...

460

Research on Agricultural Information Service Platform Based on Information Technology  

Science Conference Proceedings (OSTI)

For exiting problems of information technology in agriculture, modern information technologies are used to make agricultural information service platform, which can integrate information resources, then agricultural network information service sharing ... Keywords: modern information technology, agricultural information, service platform

Zhang Yubin; Liu Zhiguo; Lin Lizhong

2012-03-01T23:59:59.000Z

Note: This page contains sample records for the topic "activity manufacturing agriculture" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Missouri Agricultural and Energy Saving Team - A Revolutionary...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Agricultural and Energy Saving Team - A Revolutionary Opportunity (MAESTRO) Missouri Agricultural and Energy Saving Team - A Revolutionary Opportunity (MAESTRO) Eligibility...

462

Aircraft Engine Noise Control as Viewed by the Engine Manufacturer  

Science Conference Proceedings (OSTI)

The aircraft engine manufacturer has been continually confronted with the factor of noise control in conjunction with the development and production testing of engines. The scope of this control activity has increased many fold during recent years as the result of the rapid growth in types and size of military power plants. Presented in this paper is a review of the over?all control procedure including typical noise sources

Donald M. Hazard

1953-01-01T23:59:59.000Z

463

MANUFACTURING COMPLEXITY EVALUATION AT THE DESIGN STAGE FOR BOTH MACHINING AND LAYERED MANUFACTURING  

E-Print Network (OSTI)

and an additive process. Manufacturability indexes are calculated at the tool design stage, these indexes provide an accurate view of which areas of the tool will advantageously be machined or manufactured by an additive], but manufacturing features for additive technologies are still under development [5]. Furthermore, for free

Paris-Sud XI, Université de

464

Power Quality Investigation of a Manufacturing Plant  

Science Conference Proceedings (OSTI)

This case study summarizes the findings and results of a power quality (PQ) audit performed at a manufacturing plant to harden the plant processes to external PQ disturbances. Recommendations were made by EPRI and implemented by the manufacturer. The result was a significant improvement in immunity of the plant processes to voltage sags.

2007-12-31T23:59:59.000Z

465

Proceedings: EPRI Manufactured Gas Plants 2003 Forum  

SciTech Connect

The EPRI Manufactured Gas Plants 2003 Forum covered a range of topics related to remediation and management of former manufactured gas plant (MGP) sites, with emphasis on technological advances and current issues associated with site cleanup. In specific, the forum covered MGP coal-tar delineation, soil and groundwater remediation technologies, improvements in air monitoring, and ecological risk characterization/risk management tools.

None

2004-02-01T23:59:59.000Z

466

Low Temperature PEM Fuel Cell Manufacturing Needs  

NLE Websites -- All DOE Office Websites (Extended Search)

PEM Fuel Cell PEM Fuel Cell Manufacturing Needs Presented by Duarte Sousa, PE Manufacturing Fuel Cell Manhattan Project  Cost drivers were identified for the following: * MEA * Plates * Balance of Plant (BOP) * Fuel Processing Manufacturing Fuel Cell Project - Phase 1 Note that this presentation will be MEA centric as this is the working group I represent...  MEA Cost Drivers Identified: Identifying MEA Cost Drivers * The MEA was readily identified as the major cost driver in a 10 kW stationary stack. * The precious metal catalyst electrode is the major cost driver for the MEA. Thus, focus cost reduction efforts on MEA manufacturing methods. Identify gaps in MEA manufacturing technology: How much better can we do? Note: Cost reductions realized from both material price reduction

467

Summit Manufacturing: Noncompliance Determination (2010-SE-0303) |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Summit Manufacturing: Noncompliance Determination (2010-SE-0303) Summit Manufacturing: Noncompliance Determination (2010-SE-0303) Summit Manufacturing: Noncompliance Determination (2010-SE-0303) May 28, 2010 DOE issued a Notice of Noncompliance Determination to Summit Manufacturing, Inc. finding that 4SHP13LE136P + 15001+CA042A964+TDR basic model, a split-system air conditioning heat pump with a heat pump coil, does not comport with the energy conservation standards. DOE determined the product was noncompliant based on the company's own testing. Summit must immediately notify each person (or company) to whom Summit distributed the noncompliant products that the product does not meet Federal standards. In addition, Summit must provide to DOE documents and records showing the number of units Summit distributed and to whom. The manufacturer and/or

468

Revitalizing American Manufacturing | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Revitalizing American Manufacturing Revitalizing American Manufacturing Revitalizing American Manufacturing September 13, 2010 - 5:30pm Addthis A123 Systems' President David Vieau speaks with Energy Secretary Steven Chu and Michigan Governor Jennifer Granholm at the opening of their Livonia, MI plant. The plant will develop and manufacture advanced batteries systems for electric vehicles. | Department of Energy Photo | A123 Systems' President David Vieau speaks with Energy Secretary Steven Chu and Michigan Governor Jennifer Granholm at the opening of their Livonia, MI plant. The plant will develop and manufacture advanced batteries systems for electric vehicles. | Department of Energy Photo | Secretary Chu Secretary Chu Former Secretary of Energy "The Department of Energy has long been charged with accelerating energy

469

FACTSHEET: Next Generation Power Electronics Manufacturing Innovation  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

FACTSHEET: Next Generation Power Electronics Manufacturing FACTSHEET: Next Generation Power Electronics Manufacturing Innovation Institute FACTSHEET: Next Generation Power Electronics Manufacturing Innovation Institute January 15, 2014 - 9:20am Addthis The Obama Administration today announces the selection of North Carolina State University to lead a public-private manufacturing innovation institute for next generation power electronics. Supported by a $70 million Energy Department investment over five years as well as a matching $70 million in non-federal cost-share, the institute will bring together over 25 companies, universities and state and federal organizations to invent and manufacture wide bandgap (WBG) semiconductor-based power electronics that are cost-competitive and 10 times more powerful than current

470

Cost analysis methodology: Photovoltaic Manufacturing Technology Project  

DOE Green Energy (OSTI)

This report describes work done under Phase 1 of the Photovoltaic Manufacturing Technology (PVMaT) Project. PVMaT is a five-year project to support the translation of research and development in PV technology into the marketplace. PVMaT, conceived as a DOE/industry partnership, seeks to advanced PV manufacturing technologies, reduce PV module production costs, increase module performance, and expand US commercial production capacities. Under PVMaT, manufacturers will propose specific manufacturing process improvements that may contribute to the goals of the project, which is to lessen the cost, thus hastening entry into the larger scale, grid-connected applications. Phase 1 of the PVMaT project is to identify obstacles and problems associated with manufacturing processes. This report describes the cost analysis methodology required under Phase 1 that will allow subcontractors to be ranked and evaluated during Phase 2.

Whisnant, R.A. (Research Triangle Inst., Research Triangle Park, NC (United States))

1992-09-01T23:59:59.000Z

471

Blade Manufacturing Improvement Project: Final Report  

SciTech Connect

The Blade Manufacturing Improvement Project explores new, unique and improved materials integrated with innovative manufacturing techniques that promise substantial economic enhancements for the fabrication of wind turbine blades. The primary objectives promote the development of advanced wind turbine blade manufacturing in ways that lower blade costs, cut rotor weight, reduce turbine maintenance costs, improve overall turbine quality and increase ongoing production reliability. Foam Matrix (FMI) has developed a wind turbine blade with an engineered foam core, incorporating advanced composite materials and using Resin Transfer Molding (RTM) processes to form a monolithic blade structure incorporating a single molding tool. Patented techniques are employed to increase blade load bearing capability and insure the uniform quality of the manufactured blade. In production quantities, FMI manufacturing innovations may return a sizable per blade cost reduction when compared to the cost of producing comparable blades with conventional methods.

SHERWOOD, KENT

2002-10-01T23:59:59.000Z

472

Manufacturing News and Blog | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Manufacturing News and Blog Manufacturing News and Blog Manufacturing News and Blog Blog Next-Generation Power Electronics: Reducing Energy Waste and Powering the Future January 15, 2014 3:53 PM From unleashing more powerful and energy-efficient laptops, cell phones and motors, to shrinking utility-scale inverters from 8,000 pound substations to the size of a suitcase, wide bandgap semiconductors could be one of the keys to our clean energy future. Read The Full Story Manufacturing Spotlight: Boosting American Competitiveness January 6, 2014 1:06 PM Find out how the Energy Department is helping bring new clean energy technologies to the marketplace and make manufacturing processes more energy efficient. Read The Full Story Secretary Moniz Joins President Obama in Visit to Cleveland High-Strength Steel Factory

473

Clean Energy Manufacturing Resources - Technology Prototyping | Department  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Guide Home » Clean Energy Manufacturing Resources - Technology Guide Home » Clean Energy Manufacturing Resources - Technology Prototyping Clean Energy Manufacturing Resources - Technology Prototyping Clean Energy Manufacturing Resources - Technology Prototyping Find resources to help you design and refine a prototype of a new clean energy technology or product. For prototyping, areas to consider include materials characterization; models and tools; intellectual property protection; small-scale production; R&D funding; and regional, state, and local resources. For more resources, see the Clean Energy Manufacturing Federal Resource Guide. Characterize Materials Shared Research Equipment User Facility - a facility at Oak Ridge National Laboratory that provides access to advanced instruments and scientists for the scale characterization of materials.

474

Manufacturing fuel-switching capability, 1988  

SciTech Connect

Historically, about one-third of all energy consumed in the United States has been used by manufacturers. About one-quarter of manufacturing energy is used as feedstocks and raw material inputs that are converted into nonenergy products; the remainder is used for its energy content. During 1988, the most recent year for which data are available, manufacturers consumed 15.5 quadrillion British thermal units (Btu) of energy to produce heat and power and to generate electricity. The manufacturing sector also has widespread capabilities to switch from one fuel to another for either economic or emergency reasons. There are numerous ways to define fuel switching. For the purposes of the Manufacturing Energy Consumption Survey (MECS), fuel switching is defined as the capability to substitute one energy source for another within 30 days with no significant modifications to the fuel-consuming equipment, while keeping production constant. Fuel-switching capability allows manufacturers substantial flexibility in choosing their mix of energy sources. The consumption of a given energy source can be maximized if all possible switching into that energy source takes place. The estimates in this report are based on data collected on the 1988 Manufacturing Energy Consumption Survey (MECS), Forms 846 (A through C). The EIA conducts this national sample survey of manufacturing energy consumption on a triennial basis. The MECS is the only comprehensive source of national-level data on energy-related information for the manufacturing industries. The MECS was first conducted in 1986 to collect data for 1985. This report presents information on the fuel-switching capabilities of manufacturers in 1988. This report is the second of a series based on the 1988 MECS. 8 figs., 31 tabs.

1991-09-01T23:59:59.000Z

475

The economic potential of producing energy from agricultural biomass  

E-Print Network (OSTI)

Agricultural biomass is a substitute for fossil fuels, which could provide a sustained energy feedstock and possibly reduce further accumulations of greenhouse gases. However, these feedstocks currently face a market dominated by low cost fossil fuels; hence, are largely unable to be supplied at a competitive price. This study examined how forcing increased biomass energy generation, along with improvements in biomass production technology, will impact agricultural feedstock prices and economically impact the well-being of the agricultural sector. An U.S. agricultural sector model, a dynamic, nonlinear, mathematical program, determined the economic effects of using increased supplies of agricultural biomass for energy. The model incorporated production and use of potential biomass energy feedstocks, such as switchgrass and short rotation poplar. Also, the model introduced future biomass technologies, based on current research involving more productive biomass crops and more efficient conversion activities which produce ethanol and biomass electricity. The forced supply of new biomass crops, along with corn, involves several levels of energy production. This forced supply was based on projected ethanol demands and land capability for biomass production. The model determined the optimal mix of corn and energy crops to meet the biomass feedstock goals for energies. The resultant model appraises the effects of increasing biomass feedstocks for the years 1990, 2000, 2010, and 2020. The results show that initially, fuel prices using biomass feedstocks may be as much as 50 % greater than equivalent fossil fuel supplied energy. But due to technology the price of biomass feedstocks decreases over time. The analysis predicts that the agricultural feedstock price and the price of fossil fuels may equalize between the years 201 0 and 2020. The forced production of agricultural energy crops changes cropping patterns and prices for conventional crops as well. The agricultural energy crops and corn receive a greater allocation of farm land to meet the forced biomass energy supplies. Most conventional crop prices rise and all biomass feedstock prices rise with increasing feedstock production. As a consequence, farmers receive increased profits. Consumers, however, experience a loss in well-being due to the higher cost of energy feedstock and food products. National well-being experiences a net loss.

Jerko, Christine

1996-01-01T23:59:59.000Z

476

SOLID OXIDE FUEL CELL MANUFACTURING COST MODEL: SIMULATING RELATIONSHIPS BETWEEN PERFORMANCE, MANUFACTURING, AND COST OF PRODUCTION  

DOE Green Energy (OSTI)

The successful commercialization of fuel cells will depend on the achievement of competitive system costs and efficiencies. System cost directly impacts the capital equipment component of cost of electricity (COE) and is a major contributor to the O and M component. The replacement costs for equipment (also heavily influenced by stack life) is generally a major contributor to O and M costs. In this project, they worked with the SECA industrial teams to estimate the impact of general manufacturing issues of interest on stack cost using an activities-based cost model for anode-supported planar SOFC stacks with metallic interconnects. An earlier model developed for NETL for anode supported planar SOFCs was enhanced by a linkage to a performance/thermal/mechanical model, by addition of Quality Control steps to the process flow with specific characterization methods, and by assessment of economies of scale. The 3-dimensional adiabatic performance model was used to calculate the average power density for the assumed geometry and operating conditions (i.e., inlet and exhaust temperatures, utilization, and fuel composition) based on publicly available polarizations curves. The SECA team provided guidance on what manufacturing and design issues should be assessed in this Phase I demonstration of cost modeling capabilities. They considered the impact of the following parameters on yield and cost: layer thickness (i.e., anode, electrolyte, and cathode) on cost and stress levels, statistical nature of ceramic material failure on yield, and Quality Control steps and strategies. In this demonstration of the capabilities of the linked model, only the active stack (i.e., anode, electrolyte, and cathode) and interconnect materials were included in the analysis. Factory costs are presented on an area and kilowatt basis to allow developers to extrapolate to their level of performance, stack design, materials, seal and system configurations, and internal corporate overheads and margin goals.

Eric J. Carlson; Yong Yang; Chandler Fulton

2004-04-20T23:59:59.000Z

477

Flue Gas Desulfurization Gypsum Agricultural Network  

Science Conference Proceedings (OSTI)

Research on flue gas desulfurization gypsum (FGDG) has been conducted under the auspices of the Flue Gas Desulfurization Gypsum Agricultural Network program sponsored by the Electric Power Research Institute (EPRI) in collaboration with individual utilities, the U.S. Environmental Protection Agency, U.S. Department of Agriculture-Agricultural Research Service, and universities. This report describes work conducted in northwestern New Mexico in 2008–2012 as part of that effort. Two separate ...

2012-10-15T23:59:59.000Z

478

Alternative Fuels Data Center: Clean Energy Manufacturing Grants  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Clean Energy Clean Energy Manufacturing Grants to someone by E-mail Share Alternative Fuels Data Center: Clean Energy Manufacturing Grants on Facebook Tweet about Alternative Fuels Data Center: Clean Energy Manufacturing Grants on Twitter Bookmark Alternative Fuels Data Center: Clean Energy Manufacturing Grants on Google Bookmark Alternative Fuels Data Center: Clean Energy Manufacturing Grants on Delicious Rank Alternative Fuels Data Center: Clean Energy Manufacturing Grants on Digg Find More places to share Alternative Fuels Data Center: Clean Energy Manufacturing Grants on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Clean Energy Manufacturing Grants The Clean Energy Manufacturing Incentive Grant Program provides financial

479

AGRICULTURAL REPORT SPECIAL ISSUE, JULY 2008  

E-Print Network (OSTI)

. Secure America's energy future through renewable biofuels 5. Mitigate and adapt agriculture to variations will harvestprocessor will harvest and process theand process the product for wholesaleproduct for wholesale

480

Agricultural Lighting and Equipment Rebate Program (Vermont)...  

Open Energy Info (EERE)

with form History Share this page on Facebook icon Twitter icon Agricultural Lighting and Equipment Rebate Program (Vermont) This is the approved revision of this page, as...

Note: This page contains sample records for the topic "activity manufacturing agriculture" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Integrated Ingredients Dehydrated Agricultural Drying Low Temperature...  

Open Energy Info (EERE)

Login | Sign Up Search Page Edit with form History Facebook icon Twitter icon Integrated Ingredients Dehydrated Agricultural Drying Low Temperature Geothermal Facility Jump...

482

Charles County - Agricultural Preservation Districts - Renewable...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Type Siting & Permitting Charles County provides that producing energy "from solar, wind, biomass, and farm waste and residue crops" is a permitted agricultural use in areas...

483

Estimating Mitigation Potential of Agricultural Projects: an...  

Open Energy Info (EERE)

Tool (EX-ACT) Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Brazil-Estimating Mitigation Potential of Agricultural Projects: an Application of the...

484

Bioenergy development from agricultural waste on Northern ...  

Science Conference Proceedings (OSTI)

... Summary This project will convert agricultural waste, including food waste, rice straw, and other organic farm waste to bioethanol through bacterial ...

2011-08-02T23:59:59.000Z

485

Geothermal Food Processors Agricultural Drying Low Temperature...  

Open Energy Info (EERE)

Login | Sign Up Search Page Edit with form History Facebook icon Twitter icon Geothermal Food Processors Agricultural Drying Low Temperature Geothermal Facility Jump to:...

486

Growth Through Agriculture (GTA) Program (Montana) | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

policies and priorities, and awarding loans or grants that have a short-term or long-term ability to stimulate agriculture development and diversification in rural, urban,...

487

Managing IT for world-class manufacturing: the Indian scenario  

Science Conference Proceedings (OSTI)

The success of Indian manufacturing in meeting global competition will depend on its speed to move itself from a protected domestic to a world-class global manufacturing status. This paper analyses a survey conducted for the purpose of determining world-class ... Keywords: Computer-integrated manufacturing, Information technology management, Manufacturing strategy, World-class manufacturing

K. B. C Saxena; B.S Sahay

2000-02-01T23:59:59.000Z

488

Microscopic Analysis of Agriculture Products, 4th EditionChapter 7 Weed Seeds of Agricultural Importance  

Science Conference Proceedings (OSTI)

Microscopic Analysis of Agriculture Products, 4th Edition Chapter 7 Weed Seeds of Agricultural Importance Methods and Analyses eChapters Methods - Analyses Books Press Downloadable pdf of Chapter 7 Weed Seeds of A

489

Microscopic Analysis of Agriculture Products, 4th EditionChapter 8 Minerals of Agricultural Importance  

Science Conference Proceedings (OSTI)

Microscopic Analysis of Agriculture Products, 4th Edition Chapter 8 Minerals of Agricultural Importance Methods and Analyses eChapters Methods - Analyses Books Press Downloadable pdf of Chapter 8 Minerals of Agric

490

Energetx Composites: Retooling Manufacturing, Creating Michigan Jobs |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Energetx Composites: Retooling Manufacturing, Creating Michigan Energetx Composites: Retooling Manufacturing, Creating Michigan Jobs Energetx Composites: Retooling Manufacturing, Creating Michigan Jobs July 23, 2012 - 4:58pm Addthis Using its fiberglass technology expertise and a grant from the Energy Department's State Energy Program (SEP), Energetx Composites was able to shift its operations to producing wind turbine blades. | Photo courtesy of Energetx Composites. Using its fiberglass technology expertise and a grant from the Energy Department's State Energy Program (SEP), Energetx Composites was able to shift its operations to producing wind turbine blades. | Photo courtesy of Energetx Composites. Kristin Swineford Communication Specialist, Weatherization and Intergovernmental Programs What does this mean for me?

491

Clean Energy Manufacturing Resources - Technology Maturation | Department  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Maturation Maturation Clean Energy Manufacturing Resources - Technology Maturation Clean Energy Manufacturing Resources - Technology Maturation Find resources to help you commercialize and market your clean energy technology or product. For technology maturation, areas to consider include regulations and standards; exporting; product testing or demonstration; energy-efficient product qualifications; and energy efficiency and performance improvements for plants. For more resources, see the Clean Energy Manufacturing Federal Resource Guide. Comply With Regulations and Standards DOE Building Technologies Office: Appliance and Equipment Standards - minimum energy conservation standards for more than 50 categories of appliances and equipment. Implementation, Certification and Enforcement - explains DOE

492

DOE Hydrogen Analysis Repository: PEMFC Manufacturing Cost  

NLE Websites -- All DOE Office Websites (Extended Search)

PEMFC Manufacturing Cost PEMFC Manufacturing Cost Project Summary Full Title: Manufacturing Cost of Stationary Polymer Electrolyte Membrane (PEM) Fuel Cell Systems Project ID: 85 Principal Investigator: Brian James Keywords: Costs; fuel cells; stationary Performer Principal Investigator: Brian James Organization: Directed Technologies, Inc. (DTI) Address: 3601 Wilson Blvd., Suite 650 Arlington, VA 22201 Telephone: 703-243-3383 Email: brian_james@directedtechnologies.com Period of Performance End: November 1999 Project Description Type of Project: Analysis Category: Cross-Cutting Objectives: Estimate the cost of the fuel cell system using the Directed Technologies, Inc. cost database built up over the several years under U.S. Department of Energy and Ford Motor Company contracts.

493

Cooperative ExtensionTHE ECONOMIC IMPACTS OF AGRICULTURE IN WISCONSIN COUNTIES  

E-Print Network (OSTI)

In Wisconsin, policy makers are exploring ways to unleash the private sector to stimulate the economy with an emphasis on job creation. Historically agriculture has been an important part of the Wisconsin economy, but over the years the relative importance of agriculture in the economy has diminished as the service sector employment, such as recreation and tourism, became more predominant. With the loss of many manufacturing jobs and the recent recession, there is renewed interest in agriculture in terms of employment and as a potential source of new employment opportunities. But is this renewed interest justified? Is the agricultural sector one that can have a larger or stimulative role in the Wisconsin economy? How should local and state policy makers consider an “old ” industry that seems to again have relevance? In an original study by Deller (2004), the contributions of agriculture to the Wisconsin economy were documented and more recently re-examined by Deller and Williams in 2009. In both of these studies agriculture was defined to include on-farm production and food processing. Using 2007 data, Wisconsin agriculture was found to contribute $59.16 billion to total business sales (about 12.5 percent of the Wisconsin total); 353,991 jobs (10 percent of total employment) and $20.2 billion of total income (about nine percent of the Wisconsin total). For the first time, the 2009 study also used “clustering analysis ” to examine changes (2001 to 2007) in subsectors of on-farm and food processing to identify strengths, weaknesses, opportunities and threats of the

Steven Deller; David Williams; Steven C. Deller; David Williams

2011-01-01T23:59:59.000Z

494

STATEMENT OF CONSIDERATIONS REQUEST BY MOTOROLA MANUFACTURING SYSTEMS FOR  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

19 '96 12:04PM DOE/SF LEGAL OFFICE P.2 19 '96 12:04PM DOE/SF LEGAL OFFICE P.2 * * STATEMENT OF CONSIDERATIONS REQUEST BY MOTOROLA MANUFACTURING SYSTEMS FOR AN ADVANCE WAIVER OF DOMESTIC AND FOREIGN PATENT RIGHTS UNDER LBNL SUBCONTRACT NO. 6443828: DOE WAIVER NO. W(A)-96-027; SAN-670 The Petitioner, Motorola Manufacturing Systems (MMS), has requested an Advance Waiver of the Government's domestic and foreign rights to inventions made under the above cited research and development contract (R&D Contract). The objective of the R&D Contract, which is issued by the Lawrence Berkeley National Laboratory (LBNL) on behalf of DOE's Office of Health and Environmental Research (ER-70), is to provide consulting services to support planning activities toward the eventual creation of a next generation DNA sequencing facility. More

495

The DARPA manufacturing initiative in high temperature superconductivity  

SciTech Connect

The Defense Advanced Research Projects Agency (DARPA) has a very aggressive Technology Base program in high temperature superconductivity. This program is expected to provide the basis for a specialized set of military products - passive microwave and millimeter wave devices - within the next three years. In order to get these high leverage products into military systems, a manufacturing base must be developed for HTSC components. A plan for DARPA in HTSC manufacturing is directly coupled with the ongoing DARPA materials and device oriented R and D program. In essence, this plan recommends a three phased effort: 1. Phase I (two years); Fund companies through R and D contracts for specialized HTSC components; prepare a detailed plan and develop an HTSC consortium. 2. Phase II (six years): Establish an HTSC Sematech initiative for electronic applications, including active devices. 3. Phase III (optional): Continue the HTSC Sematech with emphasis on high power applications.

Adams, K.R. (Defense Advanced Research Projects Agency DARPA (US))

1989-01-01T23:59:59.000Z

496

Summit Manufacturing: Noncompliance Determination (2010-SE-0303)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

the the Matter of: Summit Manufacturing, Inc. Case Number 2010-SE-0303 NOTICE OF NONCOMPLIANCE DETERMINATION CERTIFICATION Manufacturers of certain covered products are required to certify compliance with the applicable energy conservation standards through submission of a compliance statement and a certification report. 10 CFR § 430.62. See 42 U.S.C. 6296 . The compliance statement is a legal statement by the manufacturer that the information provided in its certification reports is true , accurate and complete, that the basic models certified meet the applicable energy conservation standard, that the energy efficiency information report is the result of testing performed in conformance with the applicable test requirements in 10 CFR part 430, subpart B; and that the manufacturer is

497

Advanced Methods for Manufacturing | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Methods for Manufacturing Methods for Manufacturing Advanced Methods for Manufacturing The overall purpose of the AMM subprogram is to accelerate innovations that reduce the cost and schedule of constructing new nuclear plants and make fabrication of nuclear power plant components faster, cheaper, and more reliable. Based on past industry work and new stakeholder input, this effort will focus on opportunities that provide simplified, standardized, and labor-saving outcomes for manufacturing, fabrication, assembly, and construction processes (both technologies and methods) and show the most promise in shortening timelines and lowering overall deployment costs. The innovations selected for further development under the AMM program will collectively provide a major means of moving the U.S. nuclear industry from

498

Aurora Photovoltaics Manufacturing | Open Energy Information  

Open Energy Info (EERE)

Aurora Photovoltaics Manufacturing Aurora Photovoltaics Manufacturing Jump to: navigation, search Name Aurora Photovoltaics Manufacturing Place Lawrenceville, New Jersey Zip 8648 Sector Solar Product A subsidiary of EPV solar, based in New Jersey, focused on manufacturing of PV cells. Coordinates 36.761678°, -77.845048° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":36.761678,"lon":-77.845048,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

499

Leitner Shriram Manufacturing Ltd | Open Energy Information  

Open Energy Info (EERE)

Leitner Shriram Manufacturing Ltd Leitner Shriram Manufacturing Ltd Jump to: navigation, search Name Leitner Shriram Manufacturing Ltd Place Chennai, Tamil Nadu, India Zip 600095 Sector Wind energy Product Chennai-based JV between Leitwind and Shriram EPC with the purpose of manufacturing MW-class wind turbines. Coordinates 13.06397°, 80.24311° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":13.06397,"lon":80.24311,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

500

Manufacturing Research & Technologies | Data.gov  

NLE Websites -- All DOE Office Websites (Extended Search)

Research & Technologies Research & Technologies Manufacturing Data/Tools Research/Tech Services Apps Challenges Blogs Let's Talk Manufacturing You are here Data.gov » Communities » Manufacturing Research & Technologies It's clear that the government is working across a wide spectrum to help build the capabilities needed to support American manufacturers. Some agencies have very specific initiatives to help in this area. The National Science Foundation (NSF) Computer and Information Science and Engineering (CISE) Directorate supports research and education projects that (a) explore the foundations of computing and communication devices and their usage, (b) invent new computing and networking technologies and that explore new ways to make use of existing technologies and (c) explore the