Powered by Deep Web Technologies
Note: This page contains sample records for the topic "activity acoustic logs" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Acoustic Logs | Open Energy Information  

Open Energy Info (EERE)

Acoustic Logs Acoustic Logs Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Technique: Acoustic Logs Details Activities (7) Areas (6) Regions (0) NEPA(0) Exploration Technique Information Exploration Group: Downhole Techniques Exploration Sub Group: Well Log Techniques Parent Exploration Technique: Well Log Techniques Information Provided by Technique Lithology: determine porosity of layers Stratigraphic/Structural: map discontinuities to determine their orientation. Hydrological: Thermal: Cost Information Low-End Estimate (USD): 1.00100 centUSD 1.0e-3 kUSD 1.0e-6 MUSD 1.0e-9 TUSD / foot Median Estimate (USD): 4.62462 centUSD 0.00462 kUSD 4.62e-6 MUSD 4.62e-9 TUSD / foot High-End Estimate (USD): 16.001,600 centUSD 0.016 kUSD 1.6e-5 MUSD 1.6e-8 TUSD / foot

2

Acoustic paramagnetic logging tool  

DOE Patents (OSTI)

New methods and apparatus are disclosed which allow measurement of the presence of oil and water in geological formations using a new physical effect called the Acoustic Paramagnetic Logging Effect (APLE). The presence of petroleum in formation causes a slight increase in the earth's magnetic field in the vicinity of the reservoir. This is the phenomena of paramagnetism. Application of an acoustic source to a geological formation at the Larmor frequency of the nucleons present causes the paramagnetism of the formation to disappear. This results in a decrease in the earth3 s magnetic field in the vicinity of the oil bearing formation. Repetitively frequency sweeping the acoustic source through the Larmor frequency of the nucleons present (approx. 2 kHz) causes an amplitude modulation of the earth's magnetic field which is a consequence of the APLE. The amplitude modulation of the earth's magnetic field is measured with an induction coil gradiometer and provides a direct measure of the amount of oil and water in the excitation zone of the formation . The phase of the signal is used to infer the longitudinal relaxation times of the fluids present, which results in the ability in general to separate oil and water and to measure the viscosity of the oil present. Such measurements may be preformed in open boreholes and in cased well bores.

Vail, III, William B. (Bothell, WA)

1988-01-01T23:59:59.000Z

3

Cross-Dipole Acoustic Log | Open Energy Information  

Open Energy Info (EERE)

Cross-Dipole Acoustic Log Cross-Dipole Acoustic Log Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Technique: Cross-Dipole Acoustic Log Details Activities (1) Areas (1) Regions (0) NEPA(0) Exploration Technique Information Exploration Group: Downhole Techniques Exploration Sub Group: Well Log Techniques Parent Exploration Technique: Acoustic Logs Information Provided by Technique Lithology: Stratigraphic/Structural: Rock stress and fracture analysis Hydrological: Use for fracture identification in open and cased holes. Also used for evaluating hydro fracturing/well stimulation effectiveness. Thermal: Dictionary.png Cross-Dipole Acoustic Log: An acoustic logging technique where the acoustic transmitter and receivers are lowered down hole and waveforms that travel through the well mud,

4

Acoustic Logs At Coso Geothermal Area (2005) | Open Energy Information  

Open Energy Info (EERE)

Coso Geothermal Area (2005) Coso Geothermal Area (2005) Exploration Activity Details Location Coso Geothermal Area Exploration Technique Acoustic Logs Activity Date 2005 Usefulness not indicated DOE-funding Unknown Exploration Basis Well bore fracture analysis Notes Electrical and acoustic image logs have been collected from well 58A-10 in crystalline rock on the eastern margin. Electrical image logs appear to be sensitive to variations in mineralogy, porosity, and fluid content that highlight both natural fractures and rock fabrics. These fabric elements account for about 50% of the total population of planar structures seen in the electrical image log, but locally approach 100%. Acoustic image logs reveal a similar natural fracture population, but generally image slightly fewer fractures, and do not reveal rock fabric. Both logs also record

5

Acoustic Logs At Coso Geothermal Area (1977) | Open Energy Information  

Open Energy Info (EERE)

Coso Geothermal Area (1977) Coso Geothermal Area (1977) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Acoustic Logs At Coso Geothermal Area (1977) Exploration Activity Details Location Coso Geothermal Area Exploration Technique Acoustic Logs Activity Date 1977 Usefulness not indicated DOE-funding Unknown Notes Acoustic logs indicate fractured rock and potentially permeable zones. References Galbraith, R. M. (1 May 1978) Geological and geophysical analysis of Coso Geothermal Exploration Hole No. 1 (CGEH-1), Coso Hot Springs KGRA, California Goranson, C.; Schroeder, R. (1 June 1978) Static downhole characteristics of well CGEH-1 at Coso Hot Springs, China Lake, California Retrieved from "http://en.openei.org/w/index.php?title=Acoustic_Logs_At_Coso_Geothermal_Area_(1977)&oldid=510216"

6

Acoustic Logs At The Needles Area (DOE GTP) | Open Energy Information  

Open Energy Info (EERE)

The Needles Area (DOE GTP) Exploration Activity Details Location The Needles Area Exploration Technique Acoustic Logs Activity Date Usefulness not indicated DOE-funding Unknown...

7

COMPARISON OF ACOUSTIC AND ELECTRICAL IMAGE LOGS FROM THE COSO...  

Open Energy Info (EERE)

fractures are difficult to identify in electrical image logs because of the low percentage of the borehole wall imaged. Analysis of induced structures in acoustic image logs...

8

Dual excitation acoustic paramagnetic logging tool  

DOE Patents (OSTI)

New methods and apparatus are disclosed which allow measurement of the presence of oil and water in geological formations using a new physical effect called the Acoustic Paramagnetic Logging Effect (APLE). The presence of petroleum in formation causes a slight increase in the earth's magnetic field in the vicinity of the reservoir. This is the phenomena of paramagnetism. Application of an acoustic source to a geological formation at the Larmor frequency of the nucleons present causes the paramagnetism of the formation to disappear. This results in a decrease in the earth's magnetic field in the vicinity of the oil bearing formation. Repetitively frequency sweeping the acoustic source through the Larmor frequency of the nucleons present (approx. 2 kHz) causes an amplitude modulation of the earth's magnetic field which is a consequence of the APLE. The amplitude modulation of the earth's magnetic field is measured with an induction coil gradiometer and provides a direct measure of the amount of oil and water in the excitation zone of the formation. The phase of the signal is used to infer the longitudinal relaxation times of the fluids present, which results in the ability in general to separate oil and water and to measure the viscosity of the oil present. Such measurements may be performed in open boreholes and in cased well bores. The Dual Excitation Acoustic Paramagnetic Logging Tool employing two acoustic sources is also described. 6 figs.

Vail, W.B. III.

1989-02-14T23:59:59.000Z

9

Dual excitation acoustic paramagnetic logging tool  

DOE Patents (OSTI)

New methods and apparatus are disclosed which allow measurement of the presence of oil and water in gelogical formations using a new physical effect called the Acoustic Paramagnetic Logging Effect (APLE). The presence of petroleum in formation causes a slight increase in the earth's magnetic field in the vicinity of the reservoir. This is the phenomena of paramagnetism. Application of an acoustic source to a geological formation at the Larmor frequency of the nucleous present causes the paramagnetism of the formation to disappear. This results in a decrease in the earth's magnetic field in the vicinity of the oil bearing formation. Repetitively frequency sweeping the acoustic source through the Larmor frequency of the nucleons present (approx. 2 kHz) causes an amplitude modulation of the earth's magnetic field which is a consequence of the APLE. The amplitude modulation of the earth's magnetic field is measured with an induction coil gradiometer and provides a direct measure of the amount of oil and water in the excitation zone of the formation. The phase of the signal is used to infer the longitudinal relaxation times of the fluids present, which results in the ability in general to separate oil and water and to measure the viscosity of the oil present. Such measurements may be preformed in open boreholes and in cased well bores. The Dual Excitation Acoustic Paramagnetic Logging Tool employing two acoustic sources is also described.

Vail, III, William B. (Bothell, WA)

1989-01-01T23:59:59.000Z

10

Acoustic Logs At Raft River Geothermal Area (1979) | Open Energy  

Open Energy Info (EERE)

Raft River Geothermal Area (1979) Raft River Geothermal Area (1979) Exploration Activity Details Location Raft River Geothermal Area Exploration Technique Acoustic Logs Activity Date 1979 Usefulness useful DOE-funding Unknown Exploration Basis To permit the lateral and vertical extrapolation of core and test data and bridged the gap between surface geophysical data and core analyses. Notes Televiewer logs permitted the location and orientation of numerous fractures and several features that may be faults. References Keys, W. S.; Sullivan, J. K. (1 June 1979) Role of borehole geophysics in defining the physical characteristics of the Raft River geothermal reservoir, Idaho Retrieved from "http://en.openei.org/w/index.php?title=Acoustic_Logs_At_Raft_River_Geothermal_Area_(1979)&oldid=473816"

11

Acoustic Waveform Logging - Advances In Theory And Application  

E-Print Network (OSTI)

Full-waveform acoustic logging has made significant advances in both theory and application in recent years, and these advances have greatly increased the capability of log analysts to measure the physical properties of ...

Cheng, C. H.

12

Acoustic Logs At Alum Area (Moos & Ronne, 2010) | Open Energy Information  

Open Energy Info (EERE)

Acoustic Logs At Alum Geothermal Area (Moos & Ronne, Acoustic Logs At Alum Geothermal Area (Moos & Ronne, 2010) Exploration Activity Details Location Alum Geothermal Area Exploration Technique Acoustic Logs Activity Date Usefulness useful DOE-funding Unknown Notes The results revealed that acoustic images are superior to electrical images to detect structurally important natural fractures and stress-induced wellbore breakouts and tensile wall fractures, and were adequate to detect stratigraphic features. References Daniel Moos, Joel Ronne (2010) Selecting The Optimal Logging Suite For Geothermal Reservoir Evaluation- Results From The Alum 25-29 Well, Nevada Retrieved from "http://en.openei.org/w/index.php?title=Acoustic_Logs_At_Alum_Area_(Moos_%26_Ronne,_2010)&oldid=510215" Categories: Exploration Activities

13

Cross-Dipole Acoustic Log At Alum Area (Moos & Ronne, 2010) | Open Energy  

Open Energy Info (EERE)

Dipole Acoustic Log At Alum Area (Moos & Ronne, 2010) Dipole Acoustic Log At Alum Area (Moos & Ronne, 2010) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Cross-Dipole Acoustic Log At Alum Geothermal Area (Moos & Ronne, 2010) Exploration Activity Details Location Alum Geothermal Area Exploration Technique Cross-Dipole Acoustic Log Activity Date Usefulness useful DOE-funding Unknown Notes A crossed-dipole acoustic log detected stress induced anisotropy in the sediments, and also appeared to be able to identify and orient steeply dipping, compliant and therefore possibly conductive fractures in basement rocks. Because the shear-wave velocity was extremely low throughout most of the sedimentary section dipole data was required for its determination. The analysis results, which included a stress determination based on an

14

Acoustic Logs At Newberry Caldera Area (Combs, Et Al., 1999) | Open Energy  

Open Energy Info (EERE)

Acoustic Logs At Newberry Caldera Area (Combs, Et Al., 1999) Acoustic Logs At Newberry Caldera Area (Combs, Et Al., 1999) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Acoustic Logs At Newberry Caldera Area (Combs, Et Al., 1999) Exploration Activity Details Location Newberry Caldera Area Exploration Technique Acoustic Logs Activity Date Usefulness could be useful with more improvements DOE-funding Unknown Notes The acoustic borehole televiewer (BHTV) was run twice in the wellbore with limited success. There were several problems with the tool's fimctions, but images were successfully obtained over the interval from 2748' to 3635'. References Jim Combs, John T. Finger, Colin Goranson, Charles E. Hockox Jr., Ronald D. Jacobsen, Gene Polik (1999) Slimhole Handbook- Procedures And Recommendations For Slimhole Drilling And Testing In Geothermal Exploration

15

COMPARISON OF ACOUSTIC AND ELECTRICAL IMAGE LOGS FROM THE COSO GEOTHERMAL  

Open Energy Info (EERE)

source source History View New Pages Recent Changes All Special Pages Semantic Search/Querying Get Involved Help Apps Datasets Community Login | Sign Up Search Page Edit History Facebook icon Twitter icon » COMPARISON OF ACOUSTIC AND ELECTRICAL IMAGE LOGS FROM THE COSO GEOTHERMAL FIELD, CA Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Conference Proceedings: COMPARISON OF ACOUSTIC AND ELECTRICAL IMAGE LOGS FROM THE COSO GEOTHERMAL FIELD, CA Details Activities (1) Areas (1) Regions (0) Abstract: Electrical and acoustic image logs collected from well 58A-10 in crystalline rock on the eastern margin of the Coso Geothermal Field, CA, reveal different populations of planar structures intersecting the borehole. Electrical image logs appear to be sensitive to variations in

16

Well-logging activities in Russia  

Science Conference Proceedings (OSTI)

The report is a brief survey of the current state of well-logging service in Russia (number and types of crews, structure of well-logging jobs, types of techniques used, well-logging equipment, auxiliary downhole jobs, etc.). Types and peculiarities of well data acquisition and processing hardware and software are discussed (petrophysics included). New well-logging technologies used in Russia (new methods of electric logging data processing, electromagnetic logging, pulse neutron logging, nuclear magnetic resonance logging, acoustic tomography, logging-testing-logging technique, etc.) are surveyed. Comparison of the Tengiz field (Kazakhstan) well data obtained by Schlumberger and Neftegazgeofizika Association crews is given. Several problems and drawbacks in equipment and technology used by well-logging crews in Russia are discussed.

Savostyanov, N.A. (Neftegazgeofizika, Moscow (Russian Federation))

1993-09-01T23:59:59.000Z

17

Acoustic Logs At Steamboat Springs Area (Combs, Et Al., 1999) | Open Energy  

Open Energy Info (EERE)

Steamboat Springs Area (Combs, Et Al., 1999) Steamboat Springs Area (Combs, Et Al., 1999) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Acoustic Logs At Steamboat Springs Area (Combs, Et Al., 1999) Exploration Activity Details Location Steamboat Springs Area Exploration Technique Acoustic Logs Activity Date Usefulness useful DOE-funding Unknown Notes Two other Sandia instruments were used briefly: the acoustic borehole televiewer (BHTV) yielded wellbore images down to 520';and a Sandia memory tool gave pressuretemperature data for a shut-in test at the end of the project. Because no oriented core has been collected in this field, the televiewer images giving fracture direction were extremely M.ormative, but the BHTV could not be used at greater depths because of its temperature

18

Acoustic methods for detecting water-filled fractures using commercial logging tools  

DOE Green Energy (OSTI)

The Los Alamos Scientific Laboratory Hot Dry Rock Geothermal Energy Development Project, under the Department of Energy and in cooperation with Dresser Atlas, has conducted single- and dual-well acoustic measurements to detect fractures in the artificial geothermal reservoir at the Fenton Hill New Mexico experimental site. The measurements were made using modified Dresser Atlas logging tools. Signals traversed distances of from 48 to 150 feet between two wells. Signals intersecting hydraulic fractures in the reservoir under both hydrostatic and pressurized conditions were simultaneously detected in both wells. Upon reservoir pressurization, signals along many ray paths were severely attenuated throughout their entire coda. In addition obvious shear wave arrivals were notably absent. The signals were processed to obtain Full-Wave Acoustic, Power, and Normalized Equi-Power Logs. Analysis of these logs identified the effective ''top'' of a region of hydraulically activated fractures and fractures intersecting the injection well behind casing.

Albright, J.N.; Aamodt, R.L.; Potter, R.M.; Spence, R.W.

1978-01-01T23:59:59.000Z

19

Acoustic logging through casing to detect hydrocarbons and determine porosity in the Wilmington Field, CA  

SciTech Connect

The Wilmington Field, located in the Los Angeles Basin, CA, is composed of relatively unconsolidated turbiditic sands waterflooded for more than 40 years. As is common in this and other oil fields in California and elsewhere, considerable bypassed oil remains in place. The water-oil ratio from one well selectively completed in high-oil saturation sands is significantly lower than the water-oil ratio in adjacent wells. We have begun a 2-year test program to identify sands with high remaining oil saturations by logging old cased wells using a high power low frequency acoustic logging tool as part of a project co-funded by the Department of Energy (DOE PON PS22-94BC14972). Formation compressional-wave velocity is obtained from monopole data. Formation shear-wave velocity is obtained by analyzing dipole wave modes. In some wells, however, problems associated with poor cement-casing and cement-formation bond, casing eccentricity in the well, and tool eccentricity in the casing make it difficult to detect the dipole mode. Where good data has been obtained, compressional-wave velocities determined in the same cased hole from logs recorded by two different companies agree quite well, as do open- and cased-hole compressional and shear-wave velocities. Porosities determined through casing using shear-wave velocities match conventional open-hole log values. Saturations determined from the velocities and their ratio are similar to those calculated using Archie's Law. Relationships between porosities, saturations, and velocities are consistent with theoretical expectations. The results indicate that it is possible to determine porosity and saturation through casing using acoustic methods even in relatively unconsolidated sands such as those found in the Wilmington Field, provided sufficiently good monopole and dipole waveforms can be obtained.

Moos, D. (Stanford Univ., CA (United States)); Hooks, A. (MPI, Houston, TX (United States)); Walker, S. (Tidelands Oil Production Co., Long Beach, CA (United States))

1996-01-01T23:59:59.000Z

20

Processing dipole acoustic logging data to image fracture network in shale gas reservoirs  

Science Conference Proceedings (OSTI)

A recent advance in borehole remote acoustic reflection imaging is the utilization of a dipole acoustic system in a borehole to emit and receive elastic waves to and from a remote geologic reflector in formation. An important application of this new technique is the delineation of fracture network in shale gas reservoirs

Zhuang Chunxi; Su Yuanda; Tang Xiaoming

2012-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "activity acoustic logs" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Acoustic Timing Simulation of Active Beacons for  

E-Print Network (OSTI)

A simulation of freely-deployed active underwater beacons to estimate the tow path of a Synthetic Aperture Sonar (SAS) towfish is presented. Knowledge of the tow path allows the removal of motion induced blurring in the SAS images. The beacons sit on the seabed listening for acoustic chirps from the sonar and retransmit back in a different frequency band after a fixed time delay. After reconstruction the beacons appear in the SAS image as point-source targets, blurred by towfish motion, from which the tow-path can be determined by triangulation. The effect of reconstructing the continuous towfish motion as discrete along-track `hops' is also investigated. Simulations of a towfish path with 20 cm sway amplitude and typical measurement timing errors show a significant improvement in image quality using two active beacons.

Measuring The Tow-Path; Edward N. Pilbrow; Michael P. Hayes

2003-01-01T23:59:59.000Z

22

Similarity motion estimation and active tracking through spatial-domain projections on log-polar images  

Science Conference Proceedings (OSTI)

To cope with the huge amount of visual data in the environment, foveal sensing is not only an elegant biological solution, but also an appropriate mechanism in computer-based vision of artificial agents such as robots. An extremely important visual behavior ... Keywords: active tracking, active vision, log-polar mapping, motion estimation, projections

V. Javier Traver; Filiberto Pla

2005-02-01T23:59:59.000Z

23

Acoustic Character Of Hydraulic Fractures In Granite  

E-Print Network (OSTI)

Hydraulic fractures in homogeneous granitic rocks were logged with conventional acoustic-transit-time, acoustic-waveform, and acoustic-televiewer logging systems. Fractured intervals ranged in depth from 45 to 570m. and ...

Paillet, Frederick I.

1983-01-01T23:59:59.000Z

24

Transformation elastodynamics and active exterior acoustic cloaking  

E-Print Network (OSTI)

This chapter consists of three parts. In the first part we recall the elastodynamic equations under coordinate transformations. The idea is to use coordinate transformations to manipulate waves propagating in an elastic material. Then we study the effect of transformations on a mass-spring network model. The transformed networks can be realized with "torque springs", which are introduced here and are springs with a force proportional to the displacement in a direction other than the direction of the spring terminals. Possible homogenizations of the transformed networks are presented, with potential applications to cloaking. In the second and third parts we present cloaking methods that are based on cancelling an incident field using active devices which are exterior to the cloaked region and that do not generate significant fields far away from the devices. In the second part, the exterior cloaking problem for the Laplace equation is reformulated as the problem of polynomial approximation of analytic functions. An explicit solution is given that allows to cloak larger objects at a fixed distance from the cloaking device, compared to previous explicit solutions. In the third part we consider the active exterior cloaking problem for the Helmholtz equation in 3D. Our method uses the Green's formula and an addition theorem for spherical outgoing waves to design devices that mimic the effect of the single and double layer potentials in Green's formula.

Fernando Guevara Vasquez; Graeme W. Milton; Daniel Onofrei; Pierre Seppecher

2011-05-06T23:59:59.000Z

25

Category:Well Log Techniques | Open Energy Information  

Open Energy Info (EERE)

Category Category Edit History Facebook icon Twitter icon » Category:Well Log Techniques Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Geothermalpower.jpg Looking for the Well Log Techniques page? For detailed information on Well Log Techniques as exploration techniques, click here. Category:Well Log Techniques Add.png Add a new Well Log Techniques Technique Pages in category "Well Log Techniques" The following 17 pages are in this category, out of 17 total. A Acoustic Logs C Caliper Log Cement Bond Log Chemical Logging Cross-Dipole Acoustic Log D Density Log F FMI Log G Gamma Log I Image Logs M Mud Logging N Neutron Log P Pressure Temperature Log R Resistivity Log Resistivity Tomography S Single-Well and Cross-Well Resistivity Spontaneous Potential Well Log Stoneley Analysis

26

Illegal Logging The US Forest Service, through its International Programs office, actively works around the globe to  

E-Print Network (OSTI)

Illegal Logging The US Forest Service, through its International Programs office, actively works to enforce the recent amendment to the Lacey Act), the Forest Service's International Programs plays illegal logging from a robust and comprehensive suite of initiatives. Its programs are wide ranging

27

Beehive: large-scale log analysis for detecting suspicious activity in enterprise networks  

Science Conference Proceedings (OSTI)

As more and more Internet-based attacks arise, organizations are responding by deploying an assortment of security products that generate situational intelligence in the form of logs. These logs often contain high volumes of interesting and useful information ...

Ting-Fang Yen, Alina Oprea, Kaan Onarlioglu, Todd Leetham, William Robertson, Ari Juels, Engin Kirda

2013-12-01T23:59:59.000Z

28

Well Log Techniques At Raft River Geothermal Area (1977) | Open Energy  

Open Energy Info (EERE)

Well Log Techniques At Raft River Geothermal Area Well Log Techniques At Raft River Geothermal Area (1977) Exploration Activity Details Location Raft River Geothermal Area Exploration Technique Well Log Techniques Activity Date 1977 Usefulness not indicated DOE-funding Unknown Exploration Basis Characterize the rock using well log data. Notes Information is given on the following logs: dual-induction focused log, including resistivity, sp, and conductivity; acoustic log; compensated neutron; compensated densilog; and caliper. Lithologic breaks for a drill core to a depth of 2840 ft are illustrated. References Covington, H.R. (1 January 1978) Deep drilling data, Raft River geothermal area, Idaho Raft River geothermal exploration well No. 4 Retrieved from "http://en.openei.org/w/index.php?title=Well_Log_Techniques_At_Raft_River_Geothermal_Area_(1977)&oldid=6004

29

Michael Logli  

Science Conference Proceedings (OSTI)

Michael is a science writer, generating content for Inform magazine and the Oil Mill Gazetteer. Michael Logli Contact Information contact contact us Michael Logli S

30

Realtime logging  

Science Conference Proceedings (OSTI)

This article reports that measurement-while-drilling (MWD) logging services have become an important new source of drilling and geological information on wildcats and some development wells. Sensors located within the bottomhole assembly, barely a few feet above the bit, make measurements on the formation, the borehole and the drill string itself. The MWD measurements are electronically processed and stored in the logging tool downhole. Simple MWD logging systems must wait until after tripping out of the hole for the MWD data to be downloaded from the logging tool to a surface computer in order for logs to be produced. This method is acceptable for some formation evaluation problems. But when well control, directional or completion decisions must be made, the benefit of MWD logging data is obtained only if the downhole measurements are available to the engineer in realtime.

Whittaker, A.; Kashuba, M.J.

1987-01-01T23:59:59.000Z

31

Chemical Logging | Open Energy Information  

Open Energy Info (EERE)

Chemical Logging Chemical Logging Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Technique: Chemical Logging Details Activities (1) Areas (1) Regions (0) NEPA(0) Exploration Technique Information Exploration Group: Downhole Techniques Exploration Sub Group: Well Log Techniques Parent Exploration Technique: Well Log Techniques Information Provided by Technique Lithology: Stratigraphic/Structural: Hydrological: Presence and geochemical composition of fluid producing zones Thermal: Calcium-alkalinity ratios versus depth assist in defining warm and hot water aquifers Dictionary.png Chemical Logging: Chemical logging produces a chemical profile of the formation fluid within a well based on the measurement of changes in the chemical composition of the drilling fluid during drilling operations.

32

Cement Bond Log | Open Energy Information  

Open Energy Info (EERE)

Cement Bond Log Cement Bond Log Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Technique: Cement Bond Log Details Activities (0) Areas (0) Regions (0) NEPA(0) Exploration Technique Information Exploration Group: Downhole Techniques Exploration Sub Group: Well Log Techniques Parent Exploration Technique: Acoustic Logs Information Provided by Technique Lithology: Stratigraphic/Structural: Hydrological: Thermal: Cost Information Low-End Estimate (USD): 0.8585 centUSD 8.5e-4 kUSD 8.5e-7 MUSD 8.5e-10 TUSD / foot Median Estimate (USD): 1.25125 centUSD 0.00125 kUSD 1.25e-6 MUSD 1.25e-9 TUSD / foot High-End Estimate (USD): 3.00300 centUSD 0.003 kUSD 3.0e-6 MUSD 3.0e-9 TUSD / foot Time Required Low-End Estimate: 0.35 days9.582478e-4 years 8.4 hours 0.05 weeks 0.0115 months / job

33

Outage Log  

NLE Websites -- All DOE Office Websites (Extended Search)

For Users Live Status Global Queue Look Scheduled Outages Outage Log Edison Login Node Status Hopper Login Node Status Hopper User Environment Monitoring Carver Login Node Status...

34

Change Log  

NLE Websites -- All DOE Office Websites (Extended Search)

Change Log Change Log Change Log NERSC-8 / Trinity Benchmarks Change Log 09/03/2013 Correction applied to MiniDFT web-page (to remove inconsistency with MiniDFT README). Capability Improvement measurements do not require 10,000 MPI ranks per k-point. 08/06/2013 Various pages have changed to remove "draft" status 08/02/2013 Correction added to FLOP Counts for "Small" Single-Node Miniapplication Tests page 07/12/2013 README files updated for IOR benchmark to correct an error in wording (no code changes); README file updated for osu-micro-benchmarks (OMB) changing the tests required and conditions including reinserting some tests that had been deleted earlier 07/05/2013 README updated for mpimemu benchmark; Revised version of benchmark results spreadsheet (linked on SSP web page);

35

Rotting Logs  

NLE Websites -- All DOE Office Websites (Extended Search)

55 March 2, 1946 55 March 2, 1946 Forest Preserve District of Cook County Clayton F. Smith, President Roberts Mann, Superintendent of Conservation ROTTING LOGS There is drama in a rotting log. Apparently lifeless and useless there on the ground, it harbors thousands of living things within and beneath it. Feeding on the wood of the log, living and dying, generation after generation of them, they convert it back into minerals which a fertile healthy forest soil must have. They also add the humus which not only helps the soil to hold its moisture but also aids in making the soil minerals usable as food by plants, including trees. Finally there is nothing left but crumbling punk shot through and through with the hyphae, or roots, of molds and mushrooms. Some of the common lower plant and animal forms found in a rotting log in our forest preserves are these.

36

Neutron Log | Open Energy Information  

Open Energy Info (EERE)

Neutron Log Neutron Log Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Technique: Neutron Log Details Activities (4) Areas (4) Regions (0) NEPA(0) Exploration Technique Information Exploration Group: Downhole Techniques Exploration Sub Group: Well Log Techniques Parent Exploration Technique: Well Log Techniques Information Provided by Technique Lithology: if used in conjunction with other logs, this technique can provide information on the rock type and the porosity Stratigraphic/Structural: Corelation of rock units Hydrological: Estimate of formation porosity Thermal: Dictionary.png Neutron Log: The neutron log responds primarily to the amount of hydrogen in the formation which is contained in oil, natural gas, and water. The amount of hydrogen can be used to identify zones of higher porosity.

37

Synoptic: studying logged behavior with inferred models  

Science Conference Proceedings (OSTI)

Logging is a powerful method for capturing program activity and state during an execution. However, log inspection remains a tedious activity, with developers often piecing together what went on from multiple log lines and across many files. This paper ... Keywords: log analysis, model inference, synoptic, temporal invariant mining

Ivan Beschastnikh; Jenny Abrahamson; Yuriy Brun; Michael D. Ernst

2011-09-01T23:59:59.000Z

38

Image Logs | Open Energy Information  

Open Energy Info (EERE)

Image Logs Image Logs Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Technique: Image Logs Details Activities (2) Areas (1) Regions (0) NEPA(0) Exploration Technique Information Exploration Group: Downhole Techniques Exploration Sub Group: Well Log Techniques Parent Exploration Technique: Well Log Techniques Information Provided by Technique Lithology: Identify different lithological layers, rock composition, grain size, mineral, and clay content Stratigraphic/Structural: -Fault and fracture identification -Rock texture, porosity, and stress analysis -determine dip, thickness, and geometry of rock strata in vicinity of borehole -Detection of permeable pathways, fracture zones, faults Hydrological: Locate zones of aquifer inflow/outflow Thermal:

39

Log Summarization  

NLE Websites -- All DOE Office Websites (Extended Search)

Log Log Summarization and Anomaly Detection for Troubleshooting Distributed Systems Dan Gunter #1 , Brian L. Tierney #2 , Aaron Brown ∗3 , Martin Swany ∗4 , John Bresnahan !5 , Jennifer M. Schopf !6 # Lawrence Berkeley National Laboratory, Berkeley, CA, USA 1 dkgunter@lbl.gov 2 bltierney@lbl.gov ∗ University of Delaware, Newark, DE, USA 3 brown@cis.udel.edu 4 swany@cis.udel.edu ! Argonne National Laboratory, Argonne, IL, USA 5 bresnaha@mcs.anl.gov 6 jms@mcs.anl.gov Abstract- Today's system monitoring tools are capable of detecting system failures such as host failures, OS errors, and network partitions in near-real time. Unfortunately, the same cannot yet be said of the end-to-end distributed software stack. Any given action, for example, reliably transferring a directory of files, can involve a wide range of complex and interrelated actions across multiple pieces

40

Acoustic waves in the atmosphere and ground generated by volcanic activity  

SciTech Connect

This paper reports an interesting sequence of harmonic tremor observed in the 2011 eruption of Shinmoe-dake volcano, southern Japan. The main eruptive activity started with ashcloud forming explosive eruptions, followed by lava effusion. Harmonic tremor was transmitted into the ground and observed as seismic waves at the last stage of the effusive eruption. The tremor observed at this stage had unclear and fluctuating harmonic modes. In the atmosphere, on the other hand, many impulsive acoustic waves indicating small surface explosions were observed. When the effusion stopped and the erupted lava began explosive degassing, harmonic tremor started to be transmitted also to the atmosphere and observed as acoustic waves. Then the harmonic modes became clearer and more stable. This sequence of harmonic tremor is interpreted as a process in which volcanic degassing generates an open connection between the volcanic conduit and the atmosphere. In order to test this hypothesis, a laboratory experiment was performed and the essential features were successfully reproduced.

Ichihara, Mie; Lyons, John; Oikawa, Jun; Takeo, Minoru [Earthquake Research Institute, University of Tokyo, 1-1-1 Yayoi, Bunkyo-ku, Tokyo 113-0032 (Japan); Instituto Geofisico, Escuela Politecnica Nacional, Ladron de Guevara E11-253, Aptdo 2759, Quito (Ecuador); Earthquake Research Institute, University of Tokyo, 1-1-1 Yayoi, Bunkyo-ku, Tokyo 113-0032 (Japan)

2012-09-04T23:59:59.000Z

Note: This page contains sample records for the topic "activity acoustic logs" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

EOR: well logs sharpen focus on residual saturation. Part 2  

Science Conference Proceedings (OSTI)

Much of what the enhanced recovery specialist must know about the reservoir under consideration can be measured, calculated, or deduced from well logging data. Appropriate well logging procedures for this type of formation evaluation would include resistivity, radioactivity, dielectric constant, and acoustic well logs. This work describes the principles and procedures for assessing residual oil saturation of a subsurface formation using these methods. The study explains what is actually being measured and compared when well logging data are obtained and processed.

Frederick, R.O.

1983-01-01T23:59:59.000Z

42

Gamma Log | Open Energy Information  

Open Energy Info (EERE)

Gamma Log Gamma Log Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Technique: Gamma Log Details Activities (6) Areas (6) Regions (0) NEPA(0) Exploration Technique Information Exploration Group: Downhole Techniques Exploration Sub Group: Well Log Techniques Parent Exploration Technique: Well Log Techniques Information Provided by Technique Lithology: provides information on changes in rock type near the wellbore from changes in measured gamma radiation Stratigraphic/Structural: using multiple gamma logs over an area, the depth to the sandstone and shale layers can be correlated over larger areas Hydrological: Thermal: Cost Information Low-End Estimate (USD): 0.2525 centUSD 2.5e-4 kUSD 2.5e-7 MUSD 2.5e-10 TUSD / foot Median Estimate (USD): 0.3838 centUSD

43

Density Log | Open Energy Information  

Open Energy Info (EERE)

Density Log Density Log Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Technique: Density Log Details Activities (6) Areas (6) Regions (0) NEPA(0) Exploration Technique Information Exploration Group: Downhole Techniques Exploration Sub Group: Well Log Techniques Parent Exploration Technique: Well Log Techniques Information Provided by Technique Lithology: provides data on the bulk density of the rock surrounding the well Stratigraphic/Structural: Stratigraphic correlation between well bores. Hydrological: Porosity of the formations loggesd can be calculated for the Density log andprovide an indication potential aquifers. Thermal: Cost Information Low-End Estimate (USD): 0.4040 centUSD 4.0e-4 kUSD 4.0e-7 MUSD 4.0e-10 TUSD / foot Median Estimate (USD): 0.6868 centUSD

44

Rotting Logs  

NLE Websites -- All DOE Office Websites (Extended Search)

441-A January 22, 1972 441-A January 22, 1972 Forest Preserve District of Cook County George W. Dunne, President Roland F. Eisenbeis, Supt. of Conservation ROTTING LOGS Trees are like people. They die from diseases, infections, injuries, burns, drowning, malnutrition, and sometimes just plain old age. Walking through the woods we see, here and there, dead or dying trees of various kinds. For example: a big white oak, with its bark ripped from crown to root, was literally cooked by a bolt of lightning during a summer thunderstorm. In a grove of black oaks, many are dying lingering deaths from infected wounds started years ago when an autumn fire swept through the fallen leaves and scorched the living wood. In a dense forest there are many that have lost the battle for space and sunlight. In some places we see trees that are slowly starving because dashing rains have carried away the fertile topsoil and the trampling feet of picnickers have injured the shallow roots that bring them food.

45

Definition: Cement Bond Log | Open Energy Information  

Open Energy Info (EERE)

Definition Definition Edit with form History Facebook icon Twitter icon » Definition: Cement Bond Log Jump to: navigation, search Dictionary.png Cement Bond Log A representation of the integrity of the cement job, especially whether the cement is adhering solidly to the outside of the casing. The log is typically obtained from one of a variety of sonic-type tools. The newer versions, called cement evaluation logs, along with their processing software, can give detailed, 360-degree representations of the integrity of the cement job, whereas older versions may display a single line representing the integrated integrity around the casing.[1] Related Terms Acoustic Logs References ↑ Schlumberger Oilfield Glossary Ret LikeLike UnlikeLike You like this.Sign Up to see what your friends like.

46

Pressure Temperature Log At Maui Area (DOE GTP) | Open Energy...  

Open Energy Info (EERE)

Pressure Temperature Log At Maui Area (DOE GTP) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Pressure Temperature Log At Maui Area (DOE GTP)...

47

Mud Logging | Open Energy Information  

Open Energy Info (EERE)

Mud Logging Mud Logging Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Technique: Mud Logging Details Activities (0) Areas (0) Regions (0) NEPA(0) Exploration Technique Information Exploration Group: Downhole Techniques Exploration Sub Group: Well Log Techniques Parent Exploration Technique: Well Log Techniques Information Provided by Technique Lithology: Lithological layers are identified from drill cuttings Stratigraphic/Structural: Porosity of rocks Hydrological: Fluid content of the borehole while drilling can be determined Thermal: Cost Information Low-End Estimate (USD): 1,300.00130,000 centUSD 1.3 kUSD 0.0013 MUSD 1.3e-6 TUSD / day Median Estimate (USD): 1,450.00145,000 centUSD 1.45 kUSD 0.00145 MUSD 1.45e-6 TUSD / day High-End Estimate (USD): 2,000.00200,000 centUSD

48

Well Log Techniques | Open Energy Information  

Open Energy Info (EERE)

Well Log Techniques Well Log Techniques Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Technique: Well Log Techniques Details Activities (4) Areas (4) Regions (1) NEPA(0) Exploration Technique Information Exploration Group: Downhole Techniques Exploration Sub Group: Well Log Techniques Parent Exploration Technique: Downhole Techniques Information Provided by Technique Lithology: depth and thickness of formations; lithology and porosity can be inferred Stratigraphic/Structural: reservoir thickness, reservoir geometry, borehole geometry Hydrological: permeability and fluid composition can be inferred Thermal: direct temperature measurements; thermal conductivity and heat capacity Dictionary.png Well Log Techniques: Well logging is the measurement of formation properties versus depth in a

49

Logging in to Edison  

NLE Websites -- All DOE Office Websites (Extended Search)

Logging in Logging in to Edison Interactive Access You can log in to Edison using SSH (Secure Shell) with the following command from any UNIX, Mac OS X, Linux, FreeBSD, etc....

50

Logging in to Franklin  

NLE Websites -- All DOE Office Websites (Extended Search)

Logging in Logging in to Franklin Interactive Access You can log in to Franklin using SSH (Secure Shell) with the following command from any UNIX, Linux, FreeBSD, etc. command...

51

ILLEGAL LOGGING IN INDONESIA  

E-Print Network (OSTI)

ILLEGAL LOGGING IN INDONESIA THE ENVIRONMENTAL, ECONOMIC AND SOCIAL COSTS #12;ILLEGAL LOGGING IN INDONESIA THE ENVIRONMENTAL, ECONOMIC AND SOCIAL COSTS Contents Executive Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 #12;ILLEGAL LOGGING IN INDONESIA | 2 Executive Summary Indonesia's rainforests are the third

52

Process Deviation Log  

NLE Websites -- All DOE Office Websites (Extended Search)

AProcess Deviation Log EOTA - Business Form Document Title: P-007, Internal Audit Process Document Number: Audit Action Item Log EOTA Employees Melissa Otero NA Referenced...

53

Discovering Social Networks from Event Logs  

Science Conference Proceedings (OSTI)

Process mining techniques allow for the discovery of knowledge based on so-called "event logs", i.e., a log recording the execution of activities in some business process. Many information systems provide such logs, e.g., most WFM, ERP, CRM, SCM, and ... Keywords: Petri nets, business process management, data mining, process mining, social network analysis, workflow management

Wil M. P. Van Der Aalst; Hajo A. Reijers; Minseok Song

2005-12-01T23:59:59.000Z

54

Electric Micro Imager Log | Open Energy Information  

Open Energy Info (EERE)

Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Technique: Electric Micro Imager Log edit Details Activities (1) Areas (1) Regions (0) NEPA(0)...

55

Standard Slowness Log | Open Energy Information  

Open Energy Info (EERE)

Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Technique: Standard Slowness Log edit Details Activities (0) Areas (0) Regions (0) NEPA(0) Exploration...

56

FMI Log | Open Energy Information  

Open Energy Info (EERE)

Page Page Edit with form History Facebook icon Twitter icon » FMI Log Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Technique: FMI Log Details Activities (0) Areas (0) Regions (0) NEPA(0) Exploration Technique Information Exploration Group: Downhole Techniques Exploration Sub Group: Well Log Techniques Parent Exploration Technique: Image Logs Information Provided by Technique Lithology: Identify different lithological layers, rock composition, mineral, and clay content Stratigraphic/Structural: -Fault and fracture identification -Rock texture, porosity, and stress analysis -determine dip and structural features in vicinity of borehole -Detection of permeable pathways, fracture zones, faults Hydrological: Resistivity influenced by porosity, grain size distribution, permeability, fluid saturation, fluid type and phase state of the pore water

57

Spontaneous Potential Well Log | Open Energy Information  

Open Energy Info (EERE)

Spontaneous Potential Well Log Spontaneous Potential Well Log Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Technique: Spontaneous Potential Well Log Details Activities (2) Areas (2) Regions (0) NEPA(0) Exploration Technique Information Exploration Group: Downhole Techniques Exploration Sub Group: Well Log Techniques Parent Exploration Technique: Well Log Techniques Information Provided by Technique Lithology: SP technique originally applied to locating sulfide ore-bodies. Stratigraphic/Structural: -Formation bed thickness and boundaries -Detection and tracing of faults -Permeability and porosity Hydrological: Determination of fluid flow patterns: electrochemical coupling processes due to variations in ionic concentrations, and electrokinetic coupling processes due to fluid flow in the subsurface.

58

CEE: The Log Standard  

Science Conference Proceedings (OSTI)

... CEE & EMAP Automating an OODA Loop ? Observe Meaningful Logs, Reports, and News ? Orient Looking for Events of Possible Interest ...

2012-10-26T23:59:59.000Z

59

Bowhead whale acoustic activity in the southeast Beaufort Sea during late summer 20082010  

Science Conference Proceedings (OSTI)

Autonomous passive acoustic recorders were deployed to record sounds of bowhead whales (Balaena mysticetus) in the southeast Beaufort Sea for periods of 3055 days during the late summer

Russell A. Charif; Ashakur Rahaman; Charles A. Muirhead; Ann M. Warde; James Hall; Cynthia Py?; Christopher W. Clark

2013-01-01T23:59:59.000Z

60

Adding value to log event correlation using distributed techniques  

Science Conference Proceedings (OSTI)

Log management and monitoring activities have traditionally proved very useful in detecting system and network faults. Increasingly, log monitoring has also been recognized for its value in detecting and thwarting malicious behavior on systems and the ... Keywords: common event expression, event correlation, insider threat, insider threat detection, log management, web server logs

Justin Myers; Michael R. Grimaila; Robert F. Mills

2010-04-01T23:59:59.000Z

Note: This page contains sample records for the topic "activity acoustic logs" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Logs / Meeting Minutes Index  

NLE Websites -- All DOE Office Websites (Extended Search)

Logs / Meeting Minutes Logs / Meeting Minutes This page supplies links to the various logs and meeting minutes that are pertinent to the UES Group. FC Shift Log An ORACLE database tool used by the Floor Coordinators to record events that occur on the Experiment Hall Floor. FC Shift Log (Pubic View) Members of the APS Computer Network can use this link to view the FC Shift Log. MCR Shift Log An ORACLE database tool used by the MCR Operators to record events that occur relating to the operation of the Accelerating Systems. MCR Operator Message History The MCR Operator message for the past 72 hours are recorded for reference. UES Meeting Minutes The weekly User ESH Support group meeting minutes are recorded for reference. Also included are AOD-EOS and AOD-EFO meeting minutes. APS Radiation Safety PnP Committee Minutes

62

Recovery Efficiency Test Project: Phase 1, Activity report. Volume 1: Site selection, drill plan preparation, drilling, logging, and coring operations  

SciTech Connect

The recovery Efficiency Test well project addressed a number of technical issues. The primary objective was to determine the increased efficiency gas recovery of a long horizontal wellbore over that of a vertical wellbore and, more specifically, what improvements can be expected from inducing multiple hydraulic fractures from such a wellbore. BDM corporation located, planned, and drilled a long radius turn horizontal well in the Devonian shale Lower Huron section in Wayne County, West Virginia, demonstrating that state-of-the-art technology is capable of drilling such wells. BDM successfully tested drilling, coring, and logging in a horizontal well using air as the circulating medium; conducted reservoir modeling studies to protect flow rates and reserves in advance of drilling operations; observed two phase flow conditions in the wellbore not observed previously; cored a fracture zone which produced gas; observed that fractures in the core and the wellbore were not systematically spaced (varied from 5 to 68 feet in different parts of the wellbore); observed that highest gas show rates reported by the mud logger corresponded to zone with lowest fracture spacing (five feet) or high fracture frequency. Four and one-half inch casting was successfully installed in the borehole and was equipped to isolate the horizontal section into eight (8) zones for future testing and stimulation operations. 6 refs., 48 figs., 10 tabs.

Overbey, W.K. Jr.; Carden, R.S.; Kirr, J.N.

1987-04-01T23:59:59.000Z

63

Caliper Log | Open Energy Information  

Open Energy Info (EERE)

Caliper Log Caliper Log Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Technique: Caliper Log Details Activities (0) Areas (0) Regions (0) NEPA(0) Exploration Technique Information Exploration Group: Downhole Techniques Exploration Sub Group: Well Log Techniques Parent Exploration Technique: Well Log Techniques Information Provided by Technique Lithology: Stratigraphic/Structural: Hydrological: Thermal: Cost Information Low-End Estimate (USD): 0.4040 centUSD 4.0e-4 kUSD 4.0e-7 MUSD 4.0e-10 TUSD / foot Median Estimate (USD): 0.7878 centUSD 7.8e-4 kUSD 7.8e-7 MUSD 7.8e-10 TUSD / foot High-End Estimate (USD): 3.00300 centUSD 0.003 kUSD 3.0e-6 MUSD 3.0e-9 TUSD / foot Time Required Low-End Estimate: 0.35 days9.582478e-4 years 8.4 hours 0.05 weeks 0.0115 months / job

64

Improved geothermal well logging tools  

DOE Green Energy (OSTI)

A geothermal well logging tool has been designed to operate at 275/sup 0/C and 7000 psi. The logging tool will initially consist of a manometer, a gradiomanometer and a thermometer; the electrical and mechanical design is such that a flowmeter and a caliper can be added as a later development. A unique feature of the logging tool is that it contains no downhole active electronics. The manometer is a standard high temperature pressure gauge. The gradiomanometer consists of a differential pressure gauge which is coupled to ports separated vertically by 2 ft. The differential pressure gauge is a new development; it is designed to measure a differential pressure up to 2 psi at a line pressure of 10,000 psi. The thermometer is a platinum resistance thermometer previously developed for oil well logging. The pressure gauges are both strain gauge types which allows all three gauges are both strain gauge types which allows all three gauges to be connected in series and driven from a constant current supply. This arrangement makes it possible to use a standard seven-conductor cable with no downhole switching. The joints in the sonde are electron beam welded, thus eliminating any sealed joints in the sonde wall. The logging tool will be tested first in an autoclave and in a geothermal well later in the program.

Kratz, H.R.

1977-06-01T23:59:59.000Z

65

Process Deviation Log  

NLE Websites -- All DOE Office Websites (Extended Search)

Process Deviation Log 09_0730 Process Deviation Log 09_0730 EOTA - Business Form Document Title: P-010, Process Deviation Process Document Number: Process Deviation Log EOTA Employees Melissa Otero N/A Referenced Documents: Parent Document: F-014 Rev. 11_0316 Approvers: Melissa Otero Document Owner: Elizabeth Sousa Backup Owner: Notify of Changes: A 09_0730 11_0316 Revision History: Rev. Description of Change Intitial Release. Revised log to reflect date/date range that PD is in effect. Removed drop-down menu items. Added ECD, Extension Date and Closed Column. F-014 Process Deviation Log 09_0730 Process Deviation # Date Requestor Departme nt Process # Has PD Occurred ? (Y/N) CAR/PAR # Distributio n Date Estimated Closure Date Extension Date Closed Date Comment PD-001 PD-002 PD-003 PD-004 PD-005 PD-006 PD-007 PD-008 PD-009

66

Building a 100K log/sec logging infrastructure  

Science Conference Proceedings (OSTI)

A look at the logging infrastructure that one division of Intuit built that included the requirement to handle 100K lines of logs per second with the logs being delivered to several destinations (including proprietary appliances) This paper will cover ...

David Lang

2012-12-01T23:59:59.000Z

67

Well Log Techniques At Newberry Caldera Area (DOE GTP) | Open...  

Open Energy Info (EERE)

Newberry Caldera Area (DOE GTP) Exploration Activity Details Location Newberry Caldera Area Exploration Technique Well Log Techniques Activity Date Usefulness not indicated...

68

Pressure Temperature Log At Flint Geothermal Area (DOE GTP) ...  

Open Energy Info (EERE)

Area (DOE GTP) Exploration Activity Details Location Flint Geothermal Area Exploration Technique Pressure Temperature Log Activity Date Usefulness not indicated DOE-funding Unknown...

69

FMI Log At Wister Area (DOE GTP) | Open Energy Information  

Open Energy Info (EERE)

Wister Area (DOE GTP) Exploration Activity Details Location Wister Area Exploration Technique FMI Log Activity Date Usefulness not indicated DOE-funding Unknown References (1...

70

Pressure Temperature Log At Colrado Area (DOE GTP) | Open Energy...  

Open Energy Info (EERE)

Colrado Area (DOE GTP) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Pressure Temperature Log At Colrado Area (DOE GTP) Exploration Activity...

71

Pressure Temperature Log At Wister Area (DOE GTP) | Open Energy...  

Open Energy Info (EERE)

Wister Area (DOE GTP) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Pressure Temperature Log At Wister Area (DOE GTP) Exploration Activity...

72

openhole_logging.indd  

NLE Websites -- All DOE Office Websites (Extended Search)

OPENHOLE LOGGING WELL OPENHOLE LOGGING WELL Objective R MOTC has drilled a mostly vertical well that is specifi cally designat- ed for openhole logging tests. It was drilled to 5,400 feet and has approximately 2,350 feet of open hole to test a variety of openhole logging tools. The wellbore is drilled with an 8-1/2" drill bit. The well was originally drilled with a 3% KCL Polymer mud system that seems to work well for stabilizing sensitive shale zones. The lower formations are very compact and should be able to stay open without signifi - cant caving. RMOTC has the capability to recondition this wellbore with a variety of mud types if needed. The openhole section will pass through a variety of ages, formations, and lithologies common to the Rocky Mountain geologic province. The rocks encoun-

73

Logging in to Hopper  

NLE Websites -- All DOE Office Websites (Extended Search)

Logging in Logging in Logging in to Hopper Interactive Access You can log in to Hopper using SSH (Secure Shell) with the following command from any UNIX, Mac OS X, Linux, FreeBSD, etc. command shell or terminal: ssh -l username hopper.nersc.gov There are several SSH-capable clients available for Windows, Mac, and UNIX/Linux machines. NERSC does not support or recommend any particular client. Hopper has 12 login nodes. You will be randomly connected to one of those 12 when you ssh to hopper.nersc.gov. In all cases it will appear to you as if you are on "hopper.nersc.gov." The login nodes are where you compile codes, submit jobs, and view data. The login nodes on Hopper are "external," meaning they are not directly connected to Hopper's internal high-speed "Gemini" network. Because the

74

Logging in to Franklin  

NLE Websites -- All DOE Office Websites (Extended Search)

Logging in Logging in Logging in to Franklin Interactive Access You can log in to Franklin using SSH (Secure Shell) with the following command from any UNIX, Linux, FreeBSD, etc. command shell or terminal: % ssh -l username franklin.nersc.gov There are a number of SSH-capable clients available for Windows, Mac, and UNIX/Linux machines. NERSC does not support or recommend any particular client. Franklin has 10 login nodes; you will be randomly connected to one of those 10 when you ssh to franklin.nersc.gov. In all cases it will appear to you as if you are on "franklin.nersc.gov." The login nodes are where you compile codes, submit jobs, and view data. The login nodes on Franklin are directly connected to the internal high-speed "Seastar" network. Because of this you cannot login and work

75

Density Log at Fort Bliss Area (DOE GTP) | Open Energy Information  

Open Energy Info (EERE)

Density Log at Fort Bliss Area (DOE GTP) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Density Log at Fort Bliss Area (DOE GTP) Exploration...

76

RMOTC - Testing - Openhole Logging Well  

NLE Websites -- All DOE Office Websites (Extended Search)

Openhole Logging Well RMOTC Openhole Logging Well RMOTC has drilled a vertical well that is specifically designated for openhole logging tests. It was drilled to 5,450 feet and has...

77

Microsoft Word - scr-log  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Control Log Page : Log Date: System Name: Approval Status SCR Reqmnt Date Submitted Priority (E,U,R) * Change Approved Change Not Approved Hold (Future...

78

Chemical Logging At Raft River Geothermal Area (1979) | Open Energy  

Open Energy Info (EERE)

Logging At Raft River Geothermal Area (1979) Logging At Raft River Geothermal Area (1979) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Chemical Logging At Raft River Geothermal Area (1979) Exploration Activity Details Location Raft River Geothermal Area Exploration Technique Chemical Logging Activity Date 1979 Usefulness useful DOE-funding Unknown Exploration Basis To use new methods to assist geothermal well drilling. Notes Chemical logging resulted in the development of a technique to assist in geothermal well drilling and resource development. Calcium-alkalinity ratios plotted versus drill depth assisted in defining warm and hot water aquifers. Correlations between the calcium-alkalinity log and lithologic logs were used to determine aquifer types and detection of hot water zones

79

Gamma Log At Coso Geothermal Area (1977) | Open Energy Information  

Open Energy Info (EERE)

Gamma Log At Coso Geothermal Area (1977) Gamma Log At Coso Geothermal Area (1977) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Gamma Log At Coso Geothermal Area (1977) Exploration Activity Details Location Coso Geothermal Area Exploration Technique Gamma Log Activity Date 1977 Usefulness not indicated DOE-funding Unknown Notes extensive geophysical logging surveys were conducted: natural gamma and neutron porosity logs indicate gross rock type References Galbraith, R. M. (1 May 1978) Geological and geophysical analysis of Coso Geothermal Exploration Hole No. 1 (CGEH-1), Coso Hot Springs KGRA, California Goranson, C.; Schroeder, R. (1 June 1978) Static downhole characteristics of well CGEH-1 at Coso Hot Springs, China Lake, California Retrieved from "http://en.openei.org/w/index.php?title=Gamma_Log_At_Coso_Geothermal_Area_(1977)&oldid=510780"

80

Pressure Temperature Log At Alum Area (DOE GTP) | Open Energy...  

Open Energy Info (EERE)

Alum Area (DOE GTP) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Pressure Temperature Log At Alum Geothermal Area (DOE GTP) Exploration...

Note: This page contains sample records for the topic "activity acoustic logs" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Pressure Temperature Log At Fort Bliss Area (DOE GTP) | Open...  

Open Energy Info (EERE)

Edit History Facebook icon Twitter icon Pressure Temperature Log At Fort Bliss Area (DOE GTP) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity:...

82

Compact acoustic refrigerator  

DOE Patents (OSTI)

A compact acoustic refrigeration system actively cools components, e.g., electrical circuits, in a borehole environment. An acoustic engine includes first thermodynamic elements for generating a standing acoustic wave in a selected medium. An acoustic refrigerator includes second thermodynamic elements located in the standing wave for generating a relatively cold temperature at a first end of the second thermodynamic elements and a relatively hot temperature at a second end of the second thermodynamic elements. A resonator volume cooperates with the first and second thermodynamic elements to support the standing wave. To accommodate the high heat fluxes required for heat transfer to/from the first and second thermodynamic elements, first heat pipes transfer heat from the heat load to the second thermodynamic elements and second heat pipes transfer heat from first and second thermodynamic elements to the borehole environment. 18 figs.

Bennett, G.A.

1992-11-24T23:59:59.000Z

83

Compact acoustic refrigerator  

DOE Patents (OSTI)

This invention is comprised of a compact acoustic refrigeration system that actively cools components, e.g., electrical circuits, in a borehole environment. An acoustic engine includes first thermodynamic elements for generating a standing acoustic wave in a selected medium. An acoustic refrigerator includes second thermodynamic elements located in the standing wave for generating a relatively cold temperature at a first end of the second thermodynamic elements and a relatively hot temperature at a second end of the second thermodynamic elements. A resonator volume cooperates with the first and second thermodynamic elements to support the standing wave. To accommodate the high heat fluxes required for heat transfer to/from the first and second thermodynamic elements, first heat pipes transfer heat from the heat load to the second thermodynamic elements and second heat pipes transfer heat from first and second thermodynamic elements to the borehole environment.

Bennett, G.A.

1991-12-31T23:59:59.000Z

84

Compact acoustic refrigerator  

DOE Patents (OSTI)

A compact acoustic refrigeration system actively cools components, e.g., electrical circuits (22), in a borehole environment. An acoustic engine (12, 14) includes first thermodynamic elements (12) for generating a standing acoustic wave in a selected medium. An acoustic refrigerator (16, 26, 28) includes second thermodynamic elements (16) located in the standing wave for generating a relatively cold temperature at a first end of the second thermodynamic elements (16) and a relatively hot temperature at a second end of the second thermodynamic elements (16). A resonator volume (18) cooperates with the first and second thermodynamic elements (12, 16) to support the standing wave. To accommodate the high heat fluxes required for heat transfer to/from the first and second thermodynamic elements (12, 16), first heat pipes (24, 26) transfer heat from the heat load (22) to the second thermodynamic elements (16) and second heat pipes (28, 32) transfer heat from first and second thermodynamic elements (12, 16) to the borehole environment.

Bennett, Gloria A. (Los Alamos, NM)

1992-01-01T23:59:59.000Z

85

Acoustic imaging system  

DOE Patents (OSTI)

An acoustic imaging system for displaying an object viewed by a moving array of transducers as the array is pivoted about a fixed point within a given plane. A plurality of transducers are fixedly positioned and equally spaced within a laterally extending array and operatively directed to transmit and receive acoustic signals along substantially parallel transmission paths. The transducers are sequentially activated along the array to transmit and receive acoustic signals according to a preestablished sequence. Means are provided for generating output voltages for each reception of an acoustic signal, corresponding to the coordinate position of the object viewed as the array is pivoted. Receptions from each of the transducers are presented on the same display at coordinates corresponding to the actual position of the object viewed to form a plane view of the object scanned.

Smith, Richard W. (Richland, WA)

1979-01-01T23:59:59.000Z

86

Pressure Temperature Log | Open Energy Information  

Open Energy Info (EERE)

Page Page Edit with form History Facebook icon Twitter icon » Pressure Temperature Log Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Technique: Pressure Temperature Log Details Activities (13) Areas (13) Regions (0) NEPA(0) Exploration Technique Information Exploration Group: Downhole Techniques Exploration Sub Group: Well Log Techniques Parent Exploration Technique: Well Log Techniques Information Provided by Technique Lithology: Stratigraphic/Structural: Perturbations in temperature or pressure can be indicative of faults or other structural features Hydrological: fluid cirulation, over-pressured zones, and under-pressured zones. Thermal: Temperature profile with depth Cost Information Low-End Estimate (USD): 0.6060 centUSD 6.0e-4 kUSD

87

Image Logs At Coso Geothermal Area (2011) | Open Energy Information  

Open Energy Info (EERE)

Image Logs At Coso Geothermal Area (2011) Image Logs At Coso Geothermal Area (2011) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Image Logs At Coso Geothermal Area (2011) Exploration Activity Details Location Coso Geothermal Area Exploration Technique Image Logs Activity Date 2011 Usefulness useful DOE-funding Unknown Exploration Basis Determine crustul stress heterogeneity Notes Borehole induced structures in image logs of wells from the Coso Geothermal Field (CGF) record variation in the azimuth of principal stress. Image logs of these structures from five wells were analyzed to quantify the stress heterogeneity for three geologically distinct locations: two wells within the CGF (one in an actively produced volume), two on the margin of the CGF and outside the production area, and a control well several tens of km

88

Passive Acoustic Detection of Wind Turbine In-Flow Conditions for Active Control and Optimization  

DOE Green Energy (OSTI)

Wind is a significant source of energy; however, the human capability to produce electrical energy still has many hurdles to overcome. One of these is the unpredictability of the winds in the atmospheric boundary layer (ABL). The ABL is highly turbulent in both stable and unstable conditions (based on the vertical temperature profile) and the resulting fluctuations can have a dramatic impact on wind turbine operation. Any method by which these fluctuations could be observed, estimated, or predicted could provide a benefit to the wind energy industry as a whole. Based on the fundamental coupling of velocity fluctuations to pressure fluctuations in the nearly incompressible flow in the ABL, This work hypothesizes that a ground-based array of infrasonic pressure transducers could be employed to estimate the vertical wind profile over a height relevant for wind turbines. To analyze this hypothesis, experiments and field deployments were conducted. Wind tunnel experiments were performed for a thick turbulent boundary layer over a neutral or heated surface. Surface pressure and velocity probe measurements were acquired simultaneously. Two field deployments yielded surface pressure data from a 49 element array. The second deployment at the Reese Technology Center in Lubbock, TX, also included data from a smaller aperture, 96-element array and a 200-meter tall meteorological tower. Analysis of the data successfully demonstrated the ability to estimate the vertical velocity profile using coherence data from the pressure array. Also, dynamical systems analysis methods were successful in identifying and tracking a gust type event. In addition to the passive acoustic profiling method, this program also investigated a rapid response Doppler SODAR system, the optimization of wind turbine blades for enhanced power with reduced aeroacoustic noise production, and the implementation of a wireless health monitoring system for the wind turbine blades. Each of these other objectives was met successfully. The use of phase unwrapping applied to SODAR data was found to yield reasonable results for per-pulse measurements. A health monitoring system design analysis was able to demonstrate the ability to use a very small number of sensors to monitor blade health based on the blade's overall structural modes. Most notable was the development of a multi-objective optimization methodology that successfully yielded an aerodynamic blade design that produces greater power output with reduced aerodynamic loading noise. This optimization method could be significant for future design work.

Murray, Nathan E.

2012-03-12T23:59:59.000Z

89

Grid Logging: Best Practices Guide  

Science Conference Proceedings (OSTI)

The purpose of this document is to help developers of Grid middleware and application software generate log files that will be useful to Grid administrators, users, developers and Grid middleware itself. Currently, most of the currently generated log files are only useful to the author of the program. Good logging practices are instrumental to performance analysis, problem diagnosis, and security auditing tasks such as incident tracing and damage assessment. This document does not discuss the issue of a logging API. It is assumed that a standard log API such as syslog (C), log4j (Java), or logger (Python) is being used. Other custom logging API or even printf could be used. The key point is that the logs must contain the required information in the required format. At a high level of abstraction, the best practices for Grid logging are: (1) Consistently structured, typed, log events; (2) A standard high-resolution timestamp; (3) Use of logging levels and categories to separate logs by detail and purpose; (4) Consistent use of global and local identifiers; and (5) Use of some regular, newline-delimited ASCII text format. The rest of this document describes each of these recommendations in detail.

Tierney, Brian L; Tierney, Brian L; Gunter, Dan

2008-04-01T23:59:59.000Z

90

A Self-Contained Acoustic Scintillation Instrument for Path-Averaged Measurements of Flow and Turbulence with Application to Hydrothermal Vent and Bottom Boundary Layer Dynamics  

Science Conference Proceedings (OSTI)

A self-contained acoustical scintillation instrument is described that has been used to measure flow and turbulence characteristics in two diverse oceanographic settings. This instrument is a battery-operated and internally logging acoustic ...

D. Di Iorio; D. Lemon; R. Chave

2005-10-01T23:59:59.000Z

91

Back-propagating modes in elastic logging-while-drilling collars and their effect on PML stability  

Science Conference Proceedings (OSTI)

The Perfectly Matched Layer (PML) approach is widely used to implement the absorbing boundary conditions for coupled multi-physics wave propagation problems. However, it has been recognized that the solution in the PML absorbing layer can become unstable ... Keywords: Acoustic logging, Back-propagating mode, Borehole acoustics, Coupled problems, Perfectly matched layer, Wave propagation

Pawe? Jerzy Matuszyk, Carlos Torres-Verdn

2013-12-01T23:59:59.000Z

92

Ceramic vacuum tubes for geothermal well logging  

DOE Green Energy (OSTI)

The results of investigations carried out into the availability and suitability of ceramic vacuum tubes for the development of logging tools for geothermal wells are summarized. Design data acquired in the evaluation of ceramic vacuum tubes for the development of a 500/sup 0/C instrumentation amplifier are presented. The general requirements for ceramic vacuum tubes for application to the development of high temperature well logs are discussed. Commercially available tubes are described and future contract activities that specifically relate to ceramic vacuum tubes are detailed. Supplemental data is presented in the appendix. (MHR)

Kelly, R.D.

1977-01-12T23:59:59.000Z

93

Definition: Acoustic Televiewer | Open Energy Information  

Open Energy Info (EERE)

Televiewer Televiewer Jump to: navigation, search Dictionary.png Acoustic Televiewer The Acoustic Televiewer (ATV) log provides a very-high resolution, sonic image of the borehole wall. The tool consists of an ultrasonic transducer coupled with a downhole inclinometer. These devices are used to generate an oriented image of seismic velocity variation and wave amplitude. These images are then examined and highlighted to reveal fractures, bedding planes and orientation of those features. The log is useful for strata and fracture delineation, and can also be used to evaluate compressional-wave velocity, borehole deviation and eccentricity.[1] References ↑ http://www.dot.ca.gov/hq/esc/geotech/gg/atv_log.htm Ret LikeLike UnlikeLike You like this.Sign Up to see what your friends like.

94

Resistivity Log | Open Energy Information  

Open Energy Info (EERE)

Reservoir Evaluation- Results From The Alum 25-29 Well, Nevada Resistivity Log At Fish Lake Valley Area (DOE GTP) Fish Lake Valley Geothermal Area GTP ARRA Spreadsheet...

95

Chemical logging- a geothermal technique | Open Energy Information  

Open Energy Info (EERE)

logging- a geothermal technique logging- a geothermal technique Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Conference Proceedings: Chemical logging- a geothermal technique Details Activities (1) Areas (1) Regions (0) Abstract: Chemical logging studies conducted at the Department of Energy's Raft River Geothermal Test Site in south central Idaho resulted in the development of a technique to assist in geothermal well drilling and resource development. Calcium-alkalinity ratios plotted versus drill depth assisted in defining warm and hot water aquifers. Correlations between the calcium-alkalinity log and lithologic logs were used to determine aquifer types and detection of hot water zones 15 to 120 m before drill penetration. INEL-1 at the Idaho National Engineering Laboratory site in

96

Image Logs At Coso Geothermal Area (2004) | Open Energy Information  

Open Energy Info (EERE)

Logs At Coso Geothermal Area (2004) Logs At Coso Geothermal Area (2004) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Image Logs At Coso Geothermal Area (2004) Exploration Activity Details Location Coso Geothermal Area Exploration Technique Image Logs Activity Date 2004 Usefulness not indicated DOE-funding Unknown Exploration Basis EGS potential of Coso Geothermal Region Notes During the second year of this project, wellbore logs and stress data were acquired in a new production well drilled in the Coso Geothermal Field, 38C-9. The image analysis results include the discrimination of natural from drilling induced fractures in wellbore image data, natural fracture characterization, and wellbore failure analysis References Sheridan, J.; Hickman, S.H. (1 January 2004) IN SITU STRESS,

97

Property:ExpActivityDate | Open Energy Information  

Open Energy Info (EERE)

ExpActivityDate ExpActivityDate Jump to: navigation, search Property Name ExpActivityDate Property Type Date Description Exploration Activity Date started or year of activity. Pages using the property "ExpActivityDate" Showing 25 pages using this property. (previous 25) (next 25) 2 2-M Probe At Desert Peak Area (Sladek, Et Al., 2007) + 2007 + 2-M Probe Survey At Coso Geothermal Area (1977) + 1977 + 2-M Probe Survey At Coso Geothermal Area (1979) + 1979 + 2-M Probe Survey At Coso Geothermal Area (2007) + 2007 + 2-M Probe Survey At Salt Wells Area (Coolbaugh, Et Al., 2006) + 2005 + 2-M Probe Survey At Salt Wells Area (Skord, Et Al., 2011) + 2011 + A Acoustic Logs At Coso Geothermal Area (1977) + 1977 + Acoustic Logs At Coso Geothermal Area (2005) + 2005 +

98

Oracle Log Buffer Queueing  

SciTech Connect

The purpose of this document is to investigate Oracle database log buffer queuing and its affect on the ability to load data using a specialized data loading system. Experiments were carried out on a Linux system using an Oracle 9.2 database. Previous experiments on a Sun 4800 running Solaris had shown that 100,000 entities per minute was an achievable rate. The question was then asked, can we do this on Linux, and where are the bottlenecks? A secondary question was also lurking, how can the loading be further scaled to handle even higher throughput requirements? Testing was conducted using a Dell PowerEdge 6650 server with four CPUs and a Dell PowerVault 220s RAID array with 14 36GB drives and 128 MB of cache. Oracle Enterprise Edition 9.2.0.4 was used for the database and Red Hat Linux Advanced Server 2.1 was used for the operating system. This document will detail the maximum observed throughputs using the same test suite that was used for the Sun tests. A detailed description of the testing performed along with an analysis of bottlenecks encountered will be made. Issues related to Oracle and Linux will also be detailed and some recommendations based on the findings.

Rivenes, A S

2004-12-08T23:59:59.000Z

99

Multidimensional mining of large-scale search logs: a topic-concept cube approach  

Science Conference Proceedings (OSTI)

In addition to search queries and the corresponding clickthrough information, search engine logs record multidimensional information about user search activities, such as search time, location, vertical, and search device. Multidimensional mining of ... Keywords: olap, search log, topic-concept cube

Dongyeop Kang; Daxin Jiang; Jian Pei; Zhen Liao; Xiaohui Sun; Ho-Jin Choi

2011-02-01T23:59:59.000Z

100

Density Log at Silver Peak Area (DOE GTP) | Open Energy Information  

Open Energy Info (EERE)

Silver Peak Area (DOE GTP) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Density Log at Silver Peak Area (DOE GTP) Exploration Activity Details...

Note: This page contains sample records for the topic "activity acoustic logs" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Gamma Log At Flint Geothermal Area (DOE GTP) | Open Energy Information  

Open Energy Info (EERE)

Flint Geothermal Area (DOE GTP) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Gamma Log At Flint Geothermal Area (DOE GTP) Exploration Activity...

102

Gamma Log At Silver Peak Area (DOE GTP) | Open Energy Information  

Open Energy Info (EERE)

Silver Peak Area (DOE GTP) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Gamma Log At Silver Peak Area (DOE GTP) Exploration Activity Details...

103

Density Log at Gabbs Valley Area (DOE GTP) | Open Energy Information  

Open Energy Info (EERE)

Gabbs Valley Area (DOE GTP) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Density Log at Gabbs Valley Area (DOE GTP) Exploration Activity...

104

Ceramic vacuum tubes for geothermal well logging  

DOE Green Energy (OSTI)

Useful design data acquired in the evaluation of ceramic vacuum tubes for the development of a 500/sup 0/C instrumentation amplifier are presented. The general requirements for ceramic vacuum tubes are discussed for application to the development of high temperature well logs. Commercially available tubes are described and future contract activities that specifically relate to ceramic vacuum tubes are detailed. Supplemental data are presented in the appendix.

Kelly, R.D.

1977-01-01T23:59:59.000Z

105

Gamma Log At Alum Area (Moos & Ronne, 2010) | Open Energy Information  

Open Energy Info (EERE)

Gamma Log At Alum Area (Moos & Ronne, 2010) Gamma Log At Alum Area (Moos & Ronne, 2010) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Gamma Log At Alum Geothermal Area (Moos & Ronne, 2010) Exploration Activity Details Location Alum Geothermal Area Exploration Technique Gamma Log Activity Date Usefulness useful DOE-funding Unknown Notes Density, photo-electric factor (PEF), neutron, and gamma ray (GR) logs provided sufficient information to clearly delineate basement lithologic variations, suggesting that pulsed neutron logs may not in many cases be needed, References Daniel Moos, Joel Ronne (2010) Selecting The Optimal Logging Suite For Geothermal Reservoir Evaluation- Results From The Alum 25-29 Well, Nevada Retrieved from "http://en.openei.org/w/index.php?title=Gamma_Log_At_Alum_Area_(Moos_%26_Ronne,_2010)&oldid=510779"

106

Neutron Log At Alum Area (Moos & Ronne, 2010) | Open Energy Information  

Open Energy Info (EERE)

Neutron Log At Alum Area (Moos & Ronne, 2010) Neutron Log At Alum Area (Moos & Ronne, 2010) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Neutron Log At Alum Geothermal Area (Moos & Ronne, 2010) Exploration Activity Details Location Alum Geothermal Area Exploration Technique Neutron Log Activity Date Usefulness useful DOE-funding Unknown Notes Density, photo-electric factor (PEF), neutron, and gamma ray (GR) logs provided sufficient information to clearly delineate basement lithologic variations, suggesting that pulsed neutron logs may not in many cases be needed, References Daniel Moos, Joel Ronne (2010) Selecting The Optimal Logging Suite For Geothermal Reservoir Evaluation- Results From The Alum 25-29 Well, Nevada Retrieved from "http://en.openei.org/w/index.php?title=Neutron_Log_At_Alum_Area_(Moos_%26_Ronne,_2010)&oldid=511025"

107

Selecting The Optimal Logging Suite For Geothermal Reservoir Evaluation-  

Open Energy Info (EERE)

Selecting The Optimal Logging Suite For Geothermal Reservoir Evaluation- Selecting The Optimal Logging Suite For Geothermal Reservoir Evaluation- Results From The Alum 25-29 Well, Nevada Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Conference Paper: Selecting The Optimal Logging Suite For Geothermal Reservoir Evaluation- Results From The Alum 25-29 Well, Nevada Details Activities (6) Areas (1) Regions (0) Abstract: This paper presents the results of analysis of a state of the art set of wireline petrophysical and wellbore image logs recorded in the Alum 25-29 well, southwestern Nevada. The Alum well penetrated nearly 2000 ft (610 m) of volcano-clastic rocks and more than 1000 ft of basement, separated from the sediments by a shallowly dipping detachment fault. The logs were acquired both to characterize the site and also to select the

108

Geotech Logging Services | Open Energy Information  

Open Energy Info (EERE)

2013 DOI Not Provided Check for DOI availability: http:crossref.org Online Internet link for Geotech Logging Services Citation Geotech Logging Servces LLC. Geotech...

109

Underwater Nonlinear Acoustic Speaker.  

E-Print Network (OSTI)

??In this work an acoustic parametric array for underwater use was designed, built and tested. An acoustic parametric array creates a focused beam of sound (more)

Andersson, Sara

2011-01-01T23:59:59.000Z

110

Definition: Image Logs | Open Energy Information  

Open Energy Info (EERE)

Definition Definition Edit with form History Facebook icon Twitter icon » Definition: Image Logs Jump to: navigation, search Dictionary.png Image Logs Well logging techniques which create images of the inside of a borehole. A 360° view camera is used that can be lowered into a borehole via logging cable. The camera's purpose is to provide live images of the borehole walls. View on Wikipedia Wikipedia Definition Well logging, also known as borehole logging is the practice of making a detailed record (a well log) of the geologic formations penetrated by a borehole. The log may be based either on visual inspection of samples brought to the surface (geological logs) or on physical measurements made by instruments lowered into the hole (geophysical logs). Well logging can

111

Acoustic transducer  

DOE Patents (OSTI)

An acoustic transducer is described comprising a one-piece hollow mandrel into the outer surface of which is formed a recess with sides perpendicular to the central axis of the mandrel and separated by a first distance and with a bottom parallel to the central axis and within which recess are a plurality of washer-shaped discs of a piezoelectric material and at least one disc of a temperature-compensating material with the discs being captured between the sides of the recess in a pre-stressed interference fit, typically at 2,000 psi of compressive stress. The transducer also includes a power supply and means to connect to a measurement device. The transducer is intended to be used for telemetry between a measurement device located downhole in an oil or gas well and the surface. The transducer is of an construction that is stronger with fewer joints that could leak fluids into the recess holding the piezoelectric elements than is found in previous acoustic transducers. 4 figs.

Drumheller, D.S.

1997-12-30T23:59:59.000Z

112

Acoustic transducer  

DOE Patents (OSTI)

An acoustic transducer comprising a one-piece hollow mandrel into the outer surface of which is formed a recess with sides perpendicular to the central axis of the mandrel and separated by a first distance and with a bottom parallel to the central axis and within which recess are a plurality of washer-shaped discs of a piezoelectric material and at least one disc of a temperature-compensating material with the discs being captured between the sides of the recess in a pre-stressed interference fit, typically at 2000 psi of compressive stress. The transducer also includes a power supply and means to connect to a measurement device. The transducer is intended to be used for telemetry between a measurement device located downhole in an oil or gas well and the surface. The transducer is of an construction that is stronger with fewer joints that could leak fluids into the recess holding the piezoelectric elements than is found in previous acoustic transducers.

Drumheller, Douglas S. (Cedar Crest, NM)

1997-01-01T23:59:59.000Z

113

Internet Data logging and Display  

E-Print Network (OSTI)

The current energy savings technology relies on conventional data logging systems, in which two major barriers exist. Formost is the fact that retrieving the energy data is not convenient, and the cost of the data logging equipment is high. The solution presented here is to accomplish these goals is to include a miniature web server in a remote-logging module, which we designed as part of our device. Thus allowing data to be accessed more frequently, via the Internet. As it currently stands, the state of California in the United States is experiencing power grid problems as residential and industrial energy demands increase. If an energy savings program is to be implemented, then an energy monitoring strategy must also devised. Our Internet appliance provides a solution, and this paper summarizes our implementation details and provides a computer screen-capture of the data being posted onto the Internet.

Sweeney, J., Jr.; Culp, C.; Haberl, J. S.

2001-01-01T23:59:59.000Z

114

LogGOPSim: simulating large-scale applications in the LogGOPS model  

Science Conference Proceedings (OSTI)

We introduce LogGOPSim---a fast simulation framework for parallel algorithms at large-scale. LogGOPSim utilizes a slightly extended version of the well-known LogGPS model in combination with full MPI message matching semantics and detailed simulation ... Keywords: LogGOPS model, LogGP, LogGPS, LogP, collective operations, large-scale performance, message passing interface, simulation

Torsten Hoefler; Timo Schneider; Andrew Lumsdaine

2010-06-01T23:59:59.000Z

115

Definition: Density Log | Open Energy Information  

Open Energy Info (EERE)

Density Log Density Log Jump to: navigation, search Dictionary.png Density Log Density logging is a well logging tool that can provide a continuous record of a formation's bulk density along the length of a borehole. In geology, bulk density is a function of the density of the minerals forming a rock (i.e. matrix) and the fluid enclosed in the pore spaces.[1] View on Wikipedia Wikipedia Definition Density logging is a well logging tool that can provide a continuous record of a formation's bulk density along the length of a borehole. In geology, bulk density is a function of the density of the minerals forming a rock and the fluid enclosed in the pore spaces. This is one of three well logging tools that are commonly used to calculate porosity, the other two being sonic logging and neutron porosity logging

116

Acoustic cryocooler  

DOE Patents (OSTI)

An acoustic cryocooler with no moving parts is formed from a thermoacoustic driver (TAD) driving a pulse tube refrigerator (PTR) through a standing wave tube. Thermoacoustic elements in the TAD are spaced apart a distance effective to accommodate the increased thermal penetration length arising from the relatively low TAD operating frequency in the range of 15-60 Hz. At these low operating frequencies, a long tube is required to support the standing wave. The tube may be coiled to reduce the overall length of the cryocooler. One or two PTR's are located on the standing wave tube adjacent antinodes in the standing wave to be driven by the standing wave pressure oscillations. It is predicted that a heat input of 1000 W at 1000 K will maintain a cooling load of 5 W at 80 K. 3 figs.

Swift, G.W.; Martin, R.A.; Radebaugh, R.

1989-09-26T23:59:59.000Z

117

Acoustic cryocooler  

DOE Patents (OSTI)

An acoustic cryocooler with no moving parts is formed from a thermoacoustic driver (TAD) driving a pulse tube refrigerator (PTR) through a standing wave tube. Thermoacoustic elements in the TAD are spaced apart a distance effective to accommodate the increased thermal penetration length arising from the relatively low TAD operating frequency in the range of 15-60 Hz. At these low operating frequencies, a long tube is required to support the standing wave. The tube may be coiled to reduce the overall length of the cryocooler. One or two PTR's are located on the standing wave tube adjacent antinodes in the standing wave to be driven by the standing wave pressure oscillations. It is predicted that a heat input of 1000 W at 1000 K will maintian a cooling load of 5 W at 80 K.

Swift, Gregory W. (Santa Fe, NM); Martin, Richard A. (Los Alamos, NM); Radenbaugh, Ray (Louisville, CO)

1990-01-01T23:59:59.000Z

118

Acoustic telemetry.  

Science Conference Proceedings (OSTI)

Broadcasting messages through the earth is a daunting task. Indeed, broadcasting a normal telephone conversion through the earth by wireless means is impossible with todays technology. Most of us don't care, but some do. Industries that drill into the earth need wireless communication to broadcast navigation parameters. This allows them to steer their drill bits. They also need information about the natural formation that they are drilling. Measurements of parameters such as pressure, temperature, and gamma radiation levels can tell them if they have found a valuable resource such as a geothermal reservoir or a stratum bearing natural gas. Wireless communication methods are available to the drilling industry. Information is broadcast via either pressure waves in the drilling fluid or electromagnetic waves in the earth and well tubing. Data transmission can only travel one way at rates around a few baud. Given that normal Internet telephone modems operate near 20,000 baud, these data rates are truly very slow. Moreover, communication is often interrupted or permanently blocked by drilling conditions or natural formation properties. Here we describe a tool that communicates with stress waves traveling through the steel drill pipe and production tubing in the well. It's based on an old idea called Acoustic Telemetry. But what we present here is more than an idea. This tool exists, it's drilled several wells, and it works. Currently, it's the first and only acoustic telemetry tool that can withstand the drilling environment. It broadcasts one way over a limited range at much faster rates than existing methods, but we also know how build a system that can communicate both up and down wells of indefinite length.

Drumheller, Douglas Schaeffer; Kuszmaul, Scott S.

2003-08-01T23:59:59.000Z

119

Query clustering using user logs  

Science Conference Proceedings (OSTI)

Query clustering is a process used to discover frequently asked questions or most popular topics on a search engine. This process is crucial for search engines based on question-answering. Because of the short lengths of queries, approaches based on ... Keywords: Query clustering, search engine, user log, web data mining

2002-01-01T23:59:59.000Z

120

Pressure Temperature Log At Silver Peak Area (DOE GTP) | Open Energy  

Open Energy Info (EERE)

source source History View New Pages Recent Changes All Special Pages Semantic Search/Querying Get Involved Help Apps Datasets Community Login | Sign Up Search Page Edit History Facebook icon Twitter icon » Pressure Temperature Log At Silver Peak Area (DOE GTP) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Pressure Temperature Log At Silver Peak Area (DOE GTP) Exploration Activity Details Location Silver Peak Area Exploration Technique Pressure Temperature Log Activity Date Usefulness not indicated DOE-funding Unknown References (1 January 2011) GTP ARRA Spreadsheet Retrieved from "http://en.openei.org/w/index.php?title=Pressure_Temperature_Log_At_Silver_Peak_Area_(DOE_GTP)&oldid=511053" Categories: Exploration Activities

Note: This page contains sample records for the topic "activity acoustic logs" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Web Search/Browse Log Mining: Challenges, Methods, and Applications  

E-Print Network (OSTI)

propositional logic, in: Towards mathematical philosophy, Trends Log. Stud. Log. Libr. 28, Springer, Dordrecht

Pei, Jian

122

Definition: Resistivity Log | Open Energy Information  

Open Energy Info (EERE)

Resistivity Log Resistivity Log Jump to: navigation, search Dictionary.png Resistivity Log Electrical resistivity logging is the measurement of potential (voltage) differences resulting from electrical current flow in the vicinity of a borehole in order to determine formation resistivity.[1] View on Wikipedia Wikipedia Definition Resistivity logging is a method of well logging that works by characterizing the rock or sediment in a borehole by measuring its electrical resistivity. Resistivity is a fundamental material property which represents how strongly a material opposes the flow of electric current. In these logs, resistivity is measured using 4 electrical probes to eliminate the resistance of the contact leads. The log must run in holes containing electrically conductive mud or water. Resistivity logging is

123

Analysis of Bottom-Track and Compass Error in a Self-Contained Acoustic Doppler Diver Navigation Console  

Science Conference Proceedings (OSTI)

The Cobra-Tac (Teledyne RD Instruments) is a self-contained diver navigation system based on acoustic Doppler velocity log (DVL) technology that uses dead reckoning to compute displacements from a known starting point. The navigational accuracy ...

James L. Hench; Johanna H. Rosman

2010-07-01T23:59:59.000Z

124

Chemical logging of geothermal wells  

DOE Patents (OSTI)

The presence of geothermal aquifers can be detected while drilling in geothermal formations by maintaining a chemical log of the ratio of the concentrations of calcium to carbonate and bicarbonate ions in the return drilling fluid. A continuous increase in the ratio of the concentrations of calcium to carbonate and bicarbonate ions is indicative of the existence of a warm or hot geothermal aquifer at some increased depth.

Allen, Charles A. (Idaho Falls, ID); McAtee, Richard E. (Idaho Falls, ID)

1981-01-01T23:59:59.000Z

125

Definition: Mud Logging | Open Energy Information  

Open Energy Info (EERE)

Mud Logging Mud Logging Jump to: navigation, search Dictionary.png Mud Logging Mud logs enable the geological description and analysis of rock cuttings suspended within the returned drilling mud and can provide a variety of useful information regarding reservoir parameters.[1] View on Wikipedia Wikipedia Definition Mud logging is the creation of a detailed record of a borehole by examining the cuttings of rock or brought to the surface by the circulating drilling medium (most commonly mud). Mud logging is usually performed by a third-party mud logging company. This provides well owners and producers with information about the lithology and fluid content of the borehole while drilling. Historically it is the earliest type of well log. Under some circumstances compressed air is employed as a circulating fluid,

126

Energy Citations Database (ECD) - Alerts Log On  

Office of Scientific and Technical Information (OSTI)

ECD Alerts Log On You must Log On to use the ECD Alerts. Alerts provide users with e-mail notification of updates to the ECD in specific areas of interest. If you wish to receive...

127

High temperature electronics application in well logging  

DOE Green Energy (OSTI)

Some limitations, problems, and needs are briefly reviewed for neutron logging tools used in high-temperature geothermal environments. (ACR)

Traeger, R.K.; Lysne, P.C.

1987-01-01T23:59:59.000Z

128

Pressure Temperature Log At Mccoy Geothermal Area (DOE GTP) | Open Energy  

Open Energy Info (EERE)

Pressure Temperature Log At Mccoy Geothermal Area (DOE GTP) Pressure Temperature Log At Mccoy Geothermal Area (DOE GTP) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Pressure Temperature Log At Mccoy Geothermal Area (DOE GTP) Exploration Activity Details Location Mccoy Geothermal Area Exploration Technique Pressure Temperature Log Activity Date Usefulness not indicated DOE-funding Unknown References (1 January 2011) GTP ARRA Spreadsheet Retrieved from "http://en.openei.org/w/index.php?title=Pressure_Temperature_Log_At_Mccoy_Geothermal_Area_(DOE_GTP)&oldid=511052" Categories: Exploration Activities DOE Funded Activities ARRA Funded Activities What links here Related changes Special pages Printable version Permanent link Browse properties 429 Throttled (bot load) Error 429 Throttled (bot load)

129

Well Log Techniques At Snake River Plain Region (DOE GTP) | Open Energy  

Open Energy Info (EERE)

Well Log Techniques At Snake River Plain Region (DOE GTP) Well Log Techniques At Snake River Plain Region (DOE GTP) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Well Log Techniques At Snake River Plain Region (DOE GTP) Exploration Activity Details Location Snake River Plain Geothermal Region Exploration Technique Well Log Techniques Activity Date Usefulness not indicated DOE-funding Unknown References (1 January 2011) GTP ARRA Spreadsheet Retrieved from "http://en.openei.org/w/index.php?title=Well_Log_Techniques_At_Snake_River_Plain_Region_(DOE_GTP)&oldid=600470" Categories: Exploration Activities DOE Funded Activities ARRA Funded Activities What links here Related changes Special pages Printable version Permanent link Browse properties 429 Throttled (bot load) Error 429 Throttled (bot load)

130

Evaluation of Non-Nuclear Techniques for Well Logging: Final Report  

SciTech Connect

The focus of this study is the understanding of the technical obstacles that hinder the replacement of and the disadvantages from the loss of extensive interpretation experience based on data accumulated with AmBe. Enhanced acoustic and electromagnetic sensing methods in combination with non-isotope-based well logging techniques have the potential to complement and/or replace existing isotope-based techniques, providing the opportunity to reduce oil industry dependence on isotopic sources such as AmBe.

Bond, Leonard J.; Griffin, Jeffrey W.; Harris, R. V.; Denslow, Kayte M.; Moran, Traci L.

2011-08-01T23:59:59.000Z

131

Logging Calibration Models for Fission Neutron Sondes (September...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Logging Calibration Models for Fission Neutron Sondes (September 1981) Logging Calibration Models for Fission Neutron Sondes (September 1981) Logging Calibration Models for Fission...

132

Multipurpose Acoustic Sensor for Downhole Fluid Monitoring  

Science Conference Proceedings (OSTI)

The projects objectives and purpose are to: (1) development a multipurpose acoustic sensor for downhole fluid monitoring in Enhanced Geothermal Systems (EGS) reservoirs over typical ranges of pressures and temperatures and demonstrate its capabilities and performance for different EGS systems; (2) determine in real-time and in a single sensor package several parameters - temperature, pressure, fluid flow and fluid properties; (3) needed in nearly every phase of an EGS project, including Testing of Injection and Production Wells, Reservoir Validation, Inter-well Connectivity, Reservoir Scale Up and Reservoir Sustainability. (4) Current sensors are limited to operating at lower temperatures, but the need is for logging at high temperatures. The present project deals with the development of a novel acoustic-based sensor that can work at temperatures up to 374 C, in inhospitable environments.

Pantea, Cristian [Los Alamos National Laboratory

2012-05-04T23:59:59.000Z

133

Leak checker data logging system  

DOE Patents (OSTI)

A portable, high speed, computer-based data logging system for field testing systems or components located some distance apart employs a plurality of spaced mass spectrometers and is particularly adapted for monitoring the vacuum integrity of a long string of a superconducting magnets such as used in high energy particle accelerators. The system provides precise tracking of a gas such as helium through the magnet string when the helium is released into the vacuum by monitoring the spaced mass spectrometers allowing for control, display and storage of various parameters involved with leak detection and localization. A system user can observe the flow of helium through the magnet string on a real-time basis hour the exact moment of opening of the helium input valve. Graph reading can be normalized to compensate for magnet sections that deplete vacuum faster than other sections between testing to permit repetitive testing of vacuum integrity in reduced time.

Payne, J.J.; Gannon, J.C.

1994-12-31T23:59:59.000Z

134

Leak checker data logging system  

DOE Patents (OSTI)

A portable, high speed, computer-based data logging system for field testing systems or components located some distance apart employs a plurality of spaced mass spectrometers and is particularly adapted for monitoring the vacuum integrity of a long string of a superconducting magnets such as used in high energy particle accelerators. The system provides precise tracking of a gas such as helium through the magnet string when the helium is released into the vacuum by monitoring the spaced mass spectrometers allowing for control, display and storage of various parameters involved with leak detection and localization. A system user can observe the flow of helium through the magnet string on a real-time basis hour the exact moment of opening of the helium input valve. Graph reading can be normalized to compensate for magnet sections that deplete vacuum faster than other sections between testing to permit repetitive testing of vacuum integrity in reduced time.

Gannon, Jeffrey C. (Arlington, TX); Payne, John J. (Waterman, IL)

1996-01-01T23:59:59.000Z

135

Leak checker data logging system  

DOE Patents (OSTI)

A portable, high speed, computer-based data logging system for field testing systems or components located some distance apart employs a plurality of spaced mass spectrometers and is particularly adapted for monitoring the vacuum integrity of a long string of a superconducting magnets such as used in high energy particle accelerators. The system provides precise tracking of a gas such as helium through the magnet string when the helium is released into the vacuum by monitoring the spaced mass spectrometers allowing for control, display and storage of various parameters involved with leak detection and localization. A system user can observe the flow of helium through the magnet string on a real-time basis hour the exact moment of opening of the helium input valve. Graph reading can be normalized to compensate for magnet sections that deplete vacuum faster than other sections between testing to permit repetitive testing of vacuum integrity in reduced time. 18 figs.

Gannon, J.C.; Payne, J.J.

1996-09-03T23:59:59.000Z

136

Definition: Gamma Log | Open Energy Information  

Open Energy Info (EERE)

Definition Definition Edit with form History Facebook icon Twitter icon » Definition: Gamma Log Jump to: navigation, search Dictionary.png Gamma Log Gamma logging is a method of measuring naturally occurring gamma radiation to characterize the rock or sediment in a borehole or drill hole. It is a wireline logging method used in mining, mineral exploration, water-well drilling, for formation evaluation in oil and gas well drilling and for other related purposes. Different types of rock emit different amounts and different spectra of natural gamma radiation.[1] View on Wikipedia Wikipedia Definition Gamma ray logging is a method of measuring naturally occurring gamma radiation to characterize the rock or sediment in a borehole or drill hole. It is a wireline logging method used in mining, mineral exploration,

137

Vertical Flowmeter Logging | Open Energy Information  

Open Energy Info (EERE)

2013 DOI Not Provided Check for DOI availability: http:crossref.org Online Internet link for Vertical Flowmeter Logging Citation U.S. Geological Survey. Vertical...

138

Borehole Geophysical Logging | Open Energy Information  

Open Energy Info (EERE)

2013 DOI Not Provided Check for DOI availability: http:crossref.org Online Internet link for Borehole Geophysical Logging Citation Hager-Richter Geoscience, Inc.....

139

Acoustics by additive manufacturing.  

E-Print Network (OSTI)

??This study focuses on exploring the merging field of additive manufacturing and acoustics and introduces a new type of sound absorber which is regulating performance (more)

Setaki, F.

2012-01-01T23:59:59.000Z

140

Acoustic Microscopy Applications*  

Science Conference Proceedings (OSTI)

Figure: ...Fig. 17 A portion of the 160 mm 2 (0.25 in. 2 ) area of an alumina ceramic disk scanned by an acoustic microscope

Note: This page contains sample records for the topic "activity acoustic logs" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Density Log at Alum Area (Moos & Ronne, 2010) | Open Energy Information  

Open Energy Info (EERE)

Moos & Ronne, 2010) Moos & Ronne, 2010) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Density Log at Alum Geothermal Area (Moos & Ronne, 2010) Exploration Activity Details Location Alum Geothermal Area Exploration Technique Density Log Activity Date Usefulness useful DOE-funding Unknown Notes Density, photo-electric factor (PEF), neutron, and gamma ray (GR) logs provided sufficient information to clearly delineate basement lithologic variations, suggesting that pulsed neutron logs may not in many cases be needed, and density and electrical resistivity data were important to calibrate structural models based on surface surveys. References Daniel Moos, Joel Ronne (2010) Selecting The Optimal Logging Suite For Geothermal Reservoir Evaluation- Results From The Alum 25-29 Well,

142

Pressure Temperature Log At Vale Hot Springs Area (Combs, Et Al., 1999) |  

Open Energy Info (EERE)

Vale Hot Springs Area (Combs, Et Al., 1999) Vale Hot Springs Area (Combs, Et Al., 1999) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Pressure Temperature Log At Vale Hot Springs Area (Combs, Et Al., 1999) Exploration Activity Details Location Vale Hot Springs Area Exploration Technique Pressure Temperature Log Activity Date Usefulness not indicated DOE-funding Unknown Notes Numerous temperature logs were taken with Sandia's platinum-resistance-thermometer (PRT) tool which along with a Sandia logging truck remained on-site for the entire project. Static temperature logs (no flow in hole) were done with this tool when coring operations were suspended for bit trips, rig maintenance, or other time intervals that would permit the hole to warm up near its static temperature K580gradient.

143

A review of log-polar imaging for visual perception in robotics  

Science Conference Proceedings (OSTI)

Log-polar imaging consists of a type of methods that represent visual information with a space-variant resolution inspired by the visual system of mammals. It has been studied for about three decades and has surpassed conventional approaches in robotics ... Keywords: Active vision, Foveal imaging, Log-polar mapping, Real-time robotics

V. Javier Traver; Alexandre Bernardino

2010-04-01T23:59:59.000Z

144

Request Log Closedl Date Yes  

NLE Websites -- All DOE Office Websites (Extended Search)

6 FOIA 6 FOIA - Request Log Closedl Date Yes 01 127106 Yes 02/23/06 Yes 04/05/06 Yes 04/03/06 Yes 04/03/06 Yes 05/22/06 Yes 35/30/06 - No. - 00 1 - 002 - 003 - 004 005 006 - 307 - Dated 01 125106 0211 6106 03/29/06 03/31 106 14/03/06 1511 8/06 )5/22/06 Date Rec'd 0 I I2 5/06 02/23/06 03130/06 0313 1 106 04/03/06 05/22/06 05/22/06 HQ or Dir. Direct Transfer from HQ Direct Trans from HQ Direct Direct Transfer 'rom HQ Subject Requesting a list of all your Procurement card holders Requesting copies of any and all Freedom of Information Act (FOIA) requests submitted to the Department of Energy (DOE) by Donna Wright, the Bradenton Herald, or any other individual that requested documentation or information pertaining to the Loral American Beryllium Corporation (also known as the

145

LOGJAM: a scalable unified log file archiver  

Science Conference Proceedings (OSTI)

Log files are a necessary record of events on any system. However, as systems scale, so does the volume of data captured. To complicate matters, this data can be distributed across all nodes within the system. This creates challenges in ways to obtain ... Keywords: archiving, log files, system management

Nicholas P. Cardo

2011-11-01T23:59:59.000Z

146

Shippers in Indonesia fight decree on illegal logging Shippers in Indonesia fight decree on illegal logging  

E-Print Network (OSTI)

Shippers in Indonesia fight decree on illegal logging Shippers in Indonesia fight decree on illegal Organization (ITTO), shippers in Indonesia are threatening to stop transporting logs if the government insists harvesting affects 700,000-850,000 hectares of forest per year in Indonesia, but widespread illegal logging

147

Definition: Chemical Logging | Open Energy Information  

Open Energy Info (EERE)

Logging Logging Jump to: navigation, search Dictionary.png Chemical Logging Chemical logging produces a chemical profile of the formation fluid within a well based on the measurement of changes in the chemical composition of the drilling fluid during drilling operations.[1] References ↑ http://www.osti.gov/bridge/servlets/purl/6076582-xtVTIk/6076582.pdf Ret Like Like You like this.Sign Up to see what your friends like. rieved from "http://en.openei.org/w/index.php?title=Definition:Chemical_Logging&oldid=600357" Category: Definitions What links here Related changes Special pages Printable version Permanent link Browse properties About us Disclaimers Energy blogs Linked Data Developer services OpenEI partners with a broad range of international organizations to grow

148

Resistivity Log At Long Valley Caldera Area (Sorey, Et Al., 1991) | Open  

Open Energy Info (EERE)

Resistivity Log At Long Valley Caldera Area (Sorey, Resistivity Log At Long Valley Caldera Area (Sorey, Et Al., 1991) Exploration Activity Details Location Long Valley Caldera Area Exploration Technique Resistivity Log Activity Date Usefulness could be useful with more improvements DOE-funding Unknown Notes Lithologic and resistivity logs from wells drilled into areas of less than 20 ohm-m resistivity show clay mineralization resulting from hydrothermal alteration within the volcanic fill (Nordquist, 1987). Low resistivity in the vicinity of well 44-16, identified in wellbore geophysical logs and two dimensional MT modeling is restricted to the thermal-fluid reservoirs in the early rhyolite and Bishop Tuff (Nordquist, 1987; Suemnicht, 1987). The MT data suggest that the resistivity structure near Mammoth Mountain is

149

Impedance matched joined drill pipe for improved acoustic transmission  

DOE Patents (OSTI)

An impedance matched jointed drill pipe for improved acoustic transmission. A passive means and method that maximizes the amplitude and minimize the temporal dispersion of acoustic signals that are sent through a drill string, for use in a measurement while drilling telemetry system. The improvement in signal transmission is accomplished by replacing the standard joints in a drill string with joints constructed of a material that is impedance matched acoustically to the end of the drill pipe to which it is connected. Provides improvement in the measurement while drilling technique which can be utilized for well logging, directional drilling, and drilling dynamics, as well as gamma-ray spectroscopy while drilling post shot boreholes, such as utilized in drilling post shot boreholes.

Moss, William C. (San Mateo, CA)

2000-01-01T23:59:59.000Z

150

Acoustic cooling engine  

DOE Patents (OSTI)

An acoustic cooling engine with improved thermal performance and reduced internal losses comprises a compressible fluid contained in a resonant pressure vessel. The fluid has a substantial thermal expansion coefficient and is capable of supporting an acoustic standing wave. A thermodynamic element has first and second ends and is located in the resonant pressure vessel in thermal communication with the fluid. The thermal response of the thermodynamic element to the acoustic standing wave pumps heat from the second end to the first end. The thermodynamic element permits substantial flow of the fluid through the thermodynamic element. An acoustic driver cyclically drives the fluid with an acoustic standing wave. The driver is at a location of maximum acoustic impedance in the resonant pressure vessel and proximate the first end of the thermodynamic element. A hot heat exchanger is adjacent to and in thermal communication with the first end of the thermodynamic element. The hot heat exchanger conducts heat from the first end to portions of the resonant pressure vessel proximate the hot heat exchanger. The hot heat exchanger permits substantial flow of the fluid through the hot heat exchanger. The resonant pressure vessel can include a housing less than one quarter wavelength in length coupled to a reservoir. The housing can include a reduced diameter portion communicating with the reservoir. The frequency of the acoustic driver can be continuously controlled so as to maintain resonance.

Hofler, Thomas J. (Los Alamos, NM); Wheatley, John C. (Los Alamos, NM); Swift, Gregory W. (Santa Fe, NM); Migliori, Albert (Santa Fe, NM)

1988-01-01T23:59:59.000Z

151

Well Log Techniques At Coso Geothermal Area (1985) | Open Energy  

Open Energy Info (EERE)

Coso Geothermal Area (1985) Coso Geothermal Area (1985) Exploration Activity Details Location Coso Geothermal Area Exploration Technique Well Log Techniques Activity Date 1985 Usefulness not indicated DOE-funding Unknown Exploration Basis Impact of long term testing on the well pressure Notes The downhole pressure monitoring equipment for each well included a stainless steel pressure chamber attached to a 0.25 inch stainless steel capillary tubing. The surface end of the capillary tubing was connected to a Paroscientific quartz pressure trandsducer. References Sanyal, S.; Menzies, A.; Granados, E.; Sugine, S.; Gentner, R. (20 January 1987) Long-Term Testing of Geothermal Wells in the Coso Hot Springs KGRA Retrieved from "http://en.openei.org/w/index.php?title=Well_Log_Techniques_At_Coso_Geothermal_Area_(1985)&oldid=600462

152

Acoustical heat pumping engine  

DOE Patents (OSTI)

The disclosure is directed to an acoustical heat pumping engine without moving seals. A tubular housing holds a compressible fluid capable of supporting an acoustical standing wave. An acoustical driver is disposed at one end of the housing and the other end is capped. A second thermodynamic medium is disposed in the housing near to but spaced from the capped end. Heat is pumped along the second thermodynamic medium toward the capped end as a consequence both of the pressure oscillation due to the driver and imperfect thermal contact between the fluid and the second thermodynamic medium. 2 figs.

Wheatley, J.C.; Swift, G.W.; Migliori, A.

1983-08-16T23:59:59.000Z

153

Acoustical heat pumping engine  

DOE Patents (OSTI)

The disclosure is directed to an acoustical heat pumping engine without moving seals. A tubular housing holds a compressible fluid capable of supporting an acoustical standing wave. An acoustical driver is disposed at one end of the housing and the other end is capped. A second thermodynamic medium is disposed in the housing near to but spaced from the capped end. Heat is pumped along the second thermodynamic medium toward the capped end as a consequence both of the pressure oscillation due to the driver and imperfect thermal contact between the fluid and the second thermodynamic medium.

Wheatley, John C. (Los Alamos, NM); Swift, Gregory W. (Los Alamos, NM); Migliori, Albert (Santa Fe, NM)

1983-08-16T23:59:59.000Z

154

Acoustic well cleaner  

DOE Patents (OSTI)

A method and apparatus are disclosed for cleaning the wellbore and the near wellbore region. A sonde is provided which is adapted to be lowered into a borehole and which includes a plurality of acoustic transducers arranged around the sonde. Electrical power provided by a cable is converted to acoustic energy. The high intensity acoustic energy directed to the borehole wall and into the near wellbore region, redissolves or resuspends the material which is reducing the permeability of the formation and/or restricting flow in the wellbore.

Maki, Jr., Voldi E. (11904 Bell Ave., Austin, TX 78759-2415); Sharma, Mukul M. (Dept. of Petroleum Engr. Univ. of Texas, Austin, TX 78712)

1997-01-21T23:59:59.000Z

155

A Data Warehouse for Workflow Logs  

Science Conference Proceedings (OSTI)

Workflow Logs provide a very valuable source of information about the actual execution of business processes in organizations. We propose to use data warehouse technology to exploit this information resources for organizational developments, monitoring ...

Johann Eder; Georg E. Olivotto; Wolfgang Gruber

2002-09-01T23:59:59.000Z

156

Definition: FMI Log | Open Energy Information  

Open Energy Info (EERE)

Dictionary.png FMI Log A downhole micro electrical resistivity technique first used for oil and gas wells in the late 1980's.1 References http:petphy.blogspot.com2011...

157

Definition: Neutron Log | Open Energy Information  

Open Energy Info (EERE)

log responds primarily to the amount of hydrogen in the formation which is contained in oil, natural gas, and water. The amount of hydrogen can be used to identify zones of...

158

Energy Citations Database (ECD) - Alerts Log On  

Office of Scientific and Technical Information (OSTI)

ECD Alerts Log On Alerts provide users with e-mail notification of updates to the ECD in specific areas of interest. If you wish to receive an Alert and are not registered, please...

159

Definition: Caliper Log | Open Energy Information  

Open Energy Info (EERE)

wells. The measurements that are recorded can be an important indicator of cave ins or shale swelling in the borehole, which can effect the results of other well logs.1 View on...

160

Logging-while-coring method and apparatus  

DOE Patents (OSTI)

A method and apparatus for downhole coring while receiving logging-while-drilling tool data. The apparatus includes core collar and a retrievable core barrel. The retrievable core barrel receives core from a borehole which is sent to the surface for analysis via wireline and latching tool The core collar includes logging-while-drilling tools for the simultaneous measurement of formation properties during the core excavation process. Examples of logging-while-drilling tools include nuclear sensors, resistivity sensors, gamma ray sensors, and bit resistivity sensors. The disclosed method allows for precise core-log depth calibration and core orientation within a single borehole, and without at pipe trip, providing both time saving and unique scientific advantages.

Goldberg, David S. (New York, NY); Myers, Gregory J. (Cornwall, NY)

2007-11-13T23:59:59.000Z

Note: This page contains sample records for the topic "activity acoustic logs" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Distributed Control System Log-Keeping Specification  

Science Conference Proceedings (OSTI)

Information generated within the distributed control system (DCS) at most fossil generating stations could be more fully used by converting relevant information into searchable operator logs. This can be done through automated techniques combined with operator oversight and review. As a result, operator log-keeping effectiveness can be greatly improved while reducing the burden on the operator.ObjectivesThis project was undertaken to create specifications for ...

2012-12-12T23:59:59.000Z

162

Geophysical logging case history of the Raft River geothermal system, Idaho  

Open Energy Info (EERE)

Geophysical logging case history of the Raft River geothermal system, Idaho Geophysical logging case history of the Raft River geothermal system, Idaho Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Report: Geophysical logging case history of the Raft River geothermal system, Idaho Details Activities (1) Areas (1) Regions (0) Abstract: Drilling to evaluate the geothermal resource in the Raft River Valley began in 1974 and resulted in the discovery of a geothermal reservoir at a depth of approximately 1523 m (500 ft). Several organizations and companies have been involved in the geophysical logging program. There is no comprehensive report on the geophysical logging, nor has there been a complete interpretation. The objectives of this study are to make an integrated interpretation of the available data and compile a case history. Emphasis has been on developing a simple interpretation

163

U-039: ISC Update: BIND 9 Resolver crashes after logging an error in  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

9: ISC Update: BIND 9 Resolver crashes after logging an error 9: ISC Update: BIND 9 Resolver crashes after logging an error in query.c U-039: ISC Update: BIND 9 Resolver crashes after logging an error in query.c November 16, 2011 - 2:30pm Addthis PROBLEM: ISC Update: BIND 9 Resolver crashes after logging an error in query.c. PLATFORM: Versions of BIND, 9.4-ESV, 9.6-ESV, 9.7.x, 9.8.x ABSTRACT: A remote server can cause the target connected client to crash. Organizations across the Internet are reporting crashes interrupting service on BIND 9 nameservers performing recursive queries. Affected servers crash after logging an error in query.c with the following message: "INSIST(! dns_rdataset_isassociated(sigrdataset))" Multiple versions are reported as being affected, including all currently supported release versions of ISC BIND 9. ISC is actively investigating the root cause and

164

U-038: BIND 9 Resolver crashes after logging an error in query.c |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

8: BIND 9 Resolver crashes after logging an error in query.c 8: BIND 9 Resolver crashes after logging an error in query.c U-038: BIND 9 Resolver crashes after logging an error in query.c November 16, 2011 - 8:37am Addthis PROBLEM: BIND 9 Resolver crashes after logging an error in query.c. PLATFORM: Multiple version of BIND 9. Specific versions under investigation ABSTRACT: A remote server can cause the target connected client to crash. Organizations across the Internet are reporting crashes interrupting service on BIND 9 nameservers performing recursive queries. Affected servers crash after logging an error in query.c with the following message: "INSIST(! dns_rdataset_isassociated(sigrdataset))" Multiple versions are reported as being affected, including all currently supported release versions of ISC BIND 9. ISC is actively investigating the root cause and

165

Space, time and acoustics  

E-Print Network (OSTI)

This thesis describes the development of new concepts in acoustical analysis from their inception to implementation as a computer design tool. Research is focused on a computer program which aids the designer to visually ...

Thompson, Philip R. Z. (Philip Reed Zane)

1988-01-01T23:59:59.000Z

166

Atmospheric Acoustic Minisounder  

Science Conference Proceedings (OSTI)

An improved version of a monostatic acoustic minisounder for the investigation of the structure and dynamics of the lower boundary layer, operating at high frequencies and equipped with a specially designed micro-antenna and advanced electronic ...

D. N. Asimakopoulos; C. G. Helmis; G. J. Stephanou

1987-06-01T23:59:59.000Z

167

Spacetime transformation acoustics  

E-Print Network (OSTI)

A recently proposed analogue transformation method has allowed the extension of transformation acoustics to general spacetime transformations. We analyze here in detail the differences between this new analogue transformation acoustics (ATA) method and the standard one (STA). We show explicitly that STA is not suitable for transformations that mix space and time. ATA takes as starting point the acoustic equation for the velocity potential, instead of that for the pressure as in STA. This velocity-potential equation by itself already allows for some transformations mixing space and time, but not all of them. We explicitly obtain the entire set of transformations that do not leave its form invariant. It is in these cases that ATA shows its true potential, allowing for building a transformation acoustics method that enables the full range of spacetime transformations. We provide an example of an important transformation which cannot be achieved with STA. Using this transformation, we design and simulate an acous...

Garca-Meca, C; Barcel, C; Jannes, G; Snchez-Dehesa, J; Martnez, A

2013-01-01T23:59:59.000Z

168

Automatic acoustic guitar tuner  

E-Print Network (OSTI)

Acoustic guitar musicians tune their instruments by using a conventional tuner. Individuals pluck the string and the conventional tuner indicates whether the note is sharp or flat. The musician then has to wind the string ...

Bocanegra, Alfredo

2005-01-01T23:59:59.000Z

169

Hello, Log In Advanced Search  

E-Print Network (OSTI)

grid is critical to taking advantage of green energy," Smitherman said. "Resources like hydro and wind Environmental Hydro Project Activity Technology & Equipment Dams & Civil Structures Regulation & Policy Tenders & Notices World Regions Welcome to HydroWorld.com! Breaking News: Hydro Currents http

Neff, Jason

170

Keyboard acoustic emanations revisited  

Science Conference Proceedings (OSTI)

We examine the problem of keyboard acoustic emanations. We present a novel attack taking as input a 10-minute sound recording of a user typing English text using a keyboard, and then recovering up to 96% of typed characters. There is no need for a labeled ... Keywords: HMM, acoustic emanations, cepstrum, computer security, electronic eavesdropping, hidden Markov models, human factors, keyboards, learning theory, privacy, signal analysis

Li Zhuang; Feng Zhou; J. D. Tygar

2005-11-01T23:59:59.000Z

171

Keyboard acoustic emanations revisited  

Science Conference Proceedings (OSTI)

We examine the problem of keyboard acoustic emanations. We present a novel attack taking as input a 10-minute sound recording of a user typing English text using a keyboard and recovering up to 96% of typed characters. There is no need for training ... Keywords: Computer security, HMM, acoustic manations, cepstrum, electronic eavesdropping, hidden markov models, human factors, keyboards, learning theory, privacy, signal analysis

Li Zhuang; Feng Zhou; J. D. Tygar

2009-10-01T23:59:59.000Z

172

ATJDITORY MASKING BASED ACOUSTIC FRONT-END FOR ROBUST SPEECH RECOGNITION  

E-Print Network (OSTI)

to the mismatched conditions [15]. Adding white noise to the signal results in an constant addition to the log power the effect of additive noise distortion, white Gaussian noise is added to the speech signal and speech.Paliwal@me.gu.edu.au ABSTRACT This paper presents an acoustic front-end which uses the properties of auditory masking

173

Well Logging Security Initiatives | Y-12 National Security Complex  

NLE Websites -- All DOE Office Websites (Extended Search)

Well Logging Security ... Well Logging Security Initiatives The mp4 video format is not supported by this browser. Download video Captions: On Watch as GTRI demonstrates the threat...

174

Green Energy Resources Inc formerly New York International Log...  

Open Energy Info (EERE)

Inc formerly New York International Log Lumber Company Jump to: navigation, search Name Green Energy Resources Inc (formerly New York International Log & Lumber Company) Place...

175

Borehole Logging Methods for Exploration and Evaluation of Uranium...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

You are here Home Borehole Logging Methods for Exploration and Evaluation of Uranium Deposits (1967) Borehole Logging Methods for Exploration and Evaluation of Uranium...

176

Neutron Log At Fort Bliss Area (Combs, Et Al., 1999) | Open Energy  

Open Energy Info (EERE)

Area (Combs, Et Al., 1999) Area (Combs, Et Al., 1999) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Neutron Log At Fort Bliss Area (Combs, Et Al., 1999) Exploration Activity Details Location Fort Bliss Area Exploration Technique Neutron Log Activity Date Usefulness not indicated DOE-funding Unknown Notes Three principal types of data were obtained from this drilling project: core samples of the lithology penetrated by the holes, records of drilling behavior (such as water level in the hole, changes in rate of penetration etc.), and multiple temperature logs (both during and after drilling) in each well. A suite of geophysical logs (gamma ray, neutron, sonic, and resistivity) was also run after completion of drilling. References Jim Combs, John T. Finger, Colin Goranson, Charles E. Hockox Jr.,

177

Gamma Log At Raft River Geothermal Area (1979) | Open Energy Information  

Open Energy Info (EERE)

Gamma Log At Raft River Geothermal Area (1979) Gamma Log At Raft River Geothermal Area (1979) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Gamma Log At Raft River Geothermal Area (1979) Exploration Activity Details Location Raft River Geothermal Area Exploration Technique Gamma Log Activity Date 1979 Usefulness useful DOE-funding Unknown Exploration Basis To allow for the lateral and vertical extrapolation of core and test data and bridged the gap between surface geophysical data and core analyses. Notes Borehole gamma spectrometry can be used to identify anomalous concentration of uranium, thorium, and potassium which are probably due to transportation by hydrothermal solutions. Computer crossplotting was used as an aid to the identification of such rock types as quartzite, quartz monzonite, and

178

Gamma Log At Fort Bliss Area (Combs, Et Al., 1999) | Open Energy  

Open Energy Info (EERE)

Fort Bliss Area (Combs, Et Al., 1999) Fort Bliss Area (Combs, Et Al., 1999) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Gamma Log At Fort Bliss Area (Combs, Et Al., 1999) Exploration Activity Details Location Fort Bliss Area Exploration Technique Gamma Log Activity Date Usefulness not indicated DOE-funding Unknown Notes Three principal types of data were obtained from this drilling project: core samples of the lithology penetrated by the holes, records of drilling behavior (such as water level in the hole, changes in rate of penetration etc.), and multiple temperature logs (both during and after drilling) in each well. A suite of geophysical logs (gamma ray, neutron, sonic, and resistivity) was also run after completion of drilling. References Jim Combs, John T. Finger, Colin Goranson, Charles E. Hockox Jr.,

179

Acoustic wave propagation in cracked porous rocks and application to interpreting acoustic log data in tight formations  

Science Conference Proceedings (OSTI)

Rocks in earth's crust usually contain both pores and cracks. Typical examples include tight sandstone and shale rocks that have low porosity but contain abundant microcracks. By extending the classic Biot's poroelastic wavetheory to include the effects of cracks

Xiaoming Tang; Xuelian Chen

2012-01-01T23:59:59.000Z

180

Geothermal well log interpretation midterm report  

DOE Green Energy (OSTI)

Reservoir types are defined according to fluid phase and temperature, lithology, geologic province, pore geometry, and salinity and fluid chemistry. Improvements are needed in lithology and porosity definition, fracture detection, and thermal evaluation for more accurate interpretation. Further efforts are directed toward improving diagnostic techniques for relating rock characteristics and log response, developing petrophysical models for geothermal systems, and developing thermal evaluation techniques. The Geothermal Well Log Interpretation study and report has concentrated only on hydrothermal geothermal reservoirs. Other geothermal reservoirs (hot dry rock, geopressured, etc.) are not considered.

Sanyal, S.K.; Wells, L.E.; Bickham, R.E.

1979-02-01T23:59:59.000Z

Note: This page contains sample records for the topic "activity acoustic logs" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Learning about the world through long-term query logs  

Science Conference Proceedings (OSTI)

In this article, we demonstrate the value of long-term query logs. Most work on query logs to date considers only short-term (within-session) query information. In contrast, we show that long-term query logs can be used to learn about the world we live ... Keywords: data mining, knowledge discovery, query logs, user behavior

Matthew Richardson

2008-10-01T23:59:59.000Z

182

Security Event and Log Management Service  

E-Print Network (OSTI)

Security Event and Log Management Service: Comprehensive, Cost-effective Approach to Enhance Network Security and Security Data Management IBM Global Technology Services December 2007 #12;Executive Summary The economics of network security have changed. The high cost and complexity inherent in the use

183

High temperature spectral gamma well logging  

Science Conference Proceedings (OSTI)

A high temperature spectral gamma tool has been designed and built for use in small-diameter geothermal exploration wells. Several engineering judgments are discussed regarding operating parameters, well model selection, and signal processing. An actual well log at elevated temperatures is given with spectral gamma reading showing repeatability.

Normann, R.A.; Henfling, J.A.

1997-01-01T23:59:59.000Z

184

Team-Based Message Logging: Preliminary Results  

Science Conference Proceedings (OSTI)

Fault tolerance will be a fundamental imperative in the next decade as machines containing hundreds of thousands of cores will be installed at various locations. In this context, the traditional checkpoint/restart model does not seem to be a suitable ... Keywords: High Performance Computing, Fault Tolerance, Message Logging

Esteban Meneses; Celso L. Mendes; Laxmikant V. Kal

2010-05-01T23:59:59.000Z

185

Stratified analysis of AOL query log  

Science Conference Proceedings (OSTI)

Characterizing user's intent and behaviour while using a retrieval information tool (e.g. a search engine) is a key question on web research, as it hold the keys to know how the users interact, what they are expecting and how we can provide them information ... Keywords: Query log analysis, User behaviour, User intent, User interactions, User profiling

David J. Brenes; Daniel Gayo-Avello

2009-05-01T23:59:59.000Z

186

Improving Software Diagnosability via Log Enhancement  

Science Conference Proceedings (OSTI)

Diagnosing software failures in the field is notoriously difficult, in part due to the fundamental complexity of troubleshooting any complex software system, but further exacerbated by the paucity of information that is typically available in ... Keywords: Log, debugging, failure diagnostics, program analysis, software diagnosability

Ding Yuan; Jing Zheng; Soyeon Park; Yuanyuan Zhou; Stefan Savage

2012-02-01T23:59:59.000Z

187

Indonesia to fight illegal logging Kurniawan Hari  

E-Print Network (OSTI)

Indonesia to fight illegal logging Kurniawan Hari The government should set up a task force to deal another $8.1 billion. "Indonesia's economy will collapse if these evil practices are not stopped," Ermaya in the current fiscal year and was three times Indonesia's foreign debt budget. Commission members said the sand

188

Gamma-Ray Logging Workshop (February 1981)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Borehole logging methods for exploration Borehole logging methods for exploration and evaluation o f uranium deposits . Philip H. O d d , Robert F. Bmullad and Carl P. Lathan rej~rinkttl fnlm Mining and Groundwater Geophysiall967 Borehole logging methods for exploration and evaluation of uranium deposits Philip H. Dodd, Robert F. Droullard and Carl P. Lathan US. Atomic Energy Commhwn GmrPd Jtinct&n, Colorado Abstract, M o l e 1 - i s thc geophysical methad mast exten&@ w r t i n the Udtrrd States for exploratio~ md edwtim of wanhi &pod&. dammow lop, C o r n r n d j suppkrnentd with a singbz-pobt msfstailee log, m t l y supply about 80 percent of the bask data for om regerve c W t i o R a d mu& of the w ~ k r 6 . p ~ &ngk inf~nnatio~ Tmck-mounted 'rotmy eqnipmcnt i s EMhmody emphy&& holes usually hwre a nominai b

189

Acoustic Imaging Suite  

INLs acoustic imaging technology improves methods of capturing moving images of a specified object by using a photorefractive effect to produce a full-field image of the object without using a probe to perform a full scan of the object. INL ...

190

Energy Efficiency in Log Homes | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Energy Efficiency in Log Homes Energy Efficiency in Log Homes Energy Efficiency in Log Homes April 13, 2012 - 11:29am Addthis Consider energy efficiency when designing or purchasing a log home. | Photo courtesy of ©iStockphoto.com/tinabelle Consider energy efficiency when designing or purchasing a log home. | Photo courtesy of ©iStockphoto.com/tinabelle What does this mean for me? Before designing or purchasing a log home, you should consider several factors related to energy efficiency. Log homes may be site-built or pre-cut in a factory for delivery to the site. Some log home manufacturers can also customize their designs. Before designing or purchasing a manufactured log home, you should consider several factors related to energy efficiency. The R-Value of Wood A material's thermal resistance or resistance to heat flow is measured by

191

Energy Efficiency in Log Homes | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Energy Efficiency in Log Homes Energy Efficiency in Log Homes Energy Efficiency in Log Homes April 13, 2012 - 11:29am Addthis Consider energy efficiency when designing or purchasing a log home. | Photo courtesy of ©iStockphoto.com/tinabelle Consider energy efficiency when designing or purchasing a log home. | Photo courtesy of ©iStockphoto.com/tinabelle What does this mean for me? Before designing or purchasing a log home, you should consider several factors related to energy efficiency. Log homes may be site-built or pre-cut in a factory for delivery to the site. Some log home manufacturers can also customize their designs. Before designing or purchasing a manufactured log home, you should consider several factors related to energy efficiency. The R-Value of Wood A material's thermal resistance or resistance to heat flow is measured by

192

Development of an acoustic sensor for a geothermal borehole televiewer  

DOE Green Energy (OSTI)

The objective of this project is to upgrade acoustic sensor technology such that appropriate well logging instruments can be made to operate under the hostile environment conditions anticipated in geothermal resource exploration and evaluation. The Borehole Televiewer (BHTV) was selected as the vehicle for this sensor improvement work, primarily because of its demonstrated ability to detect and characterize fractures under sub-geothermal conditions. The work done toward providing an improved sensor for the televiewer is described. An experimental sensor concept was devised, incorporating a thin metal acoustic window, an improved, high-temperature internal coupling fluid, and thermally resistant sensor internals. During an autoclave test, it was successfully demonstrated that the resulting experimental sensor design concept provides the basic target detection and characterization functions required of a fracture mapping, Borehole Televiewer under simulated geothermal conditions. In particular, the experimental sensor remained operational at 275/sup 0/C and 7000 psi.

Wonn, J.W.

1979-03-01T23:59:59.000Z

193

Development of an acoustic sensor for a geothermal Borehole Televiewer  

DOE Green Energy (OSTI)

The objective of this project is to upgrade acoustic sensor technology such that appropriate well logging instruments can be made to operate under the hostile environment conditions anticipated in geothermal resource exploration and evaluation. The Borehole Televiewer (BHTV) was selected as the vehicle for this sensor improvement work, primarily because of its demonstrated ability to detect and characterize fractures under sub-geothermal conditions. The work done toward providing an improved sensor for the televiewer is described. An experimental sensor concept was devised, incorporating a thin metal acoustic window, an improved, high-temperature internal coupling fluid, and thermally resistant sensor internals. During an autoclave test, it was successfully demonstrated that the resulting experimental sensor design concept provides the basic target detection and characterization functions required of a fracture mapping, Borehole Televiewer under simulated geothermal conditions. In particular, the experimental sensor remained operational at 275/sup 0/C and 7000 psi.

Wonn, J.W.

1979-03-01T23:59:59.000Z

194

Microsoft Word - FOIA Log FY 2001.doc  

NLE Websites -- All DOE Office Websites (Extended Search)

1 FOIA - Request Log 1 FOIA - Request Log 1 Closed/ Date No. Dated Date Rec'd HQ or Dir. Subject Yes/ 3/29/01 001 02/01/01 02/01/01 01-0021C Transfer AL Copies of all documents including studies and memoranda, which may identify or consider WIPP site in Carlsbad, NM as a potential site for storage or disposal of spent reactor fuel or high-level radioactive wastes 2. All documents including studies, memoranda, hypothesizing, considering, recommending, or suggesting the WIPP site in NM as an alternative site to the Yucca Mountain site in NV. 3. All documents or lists setting forth the alternative sites that may potential be considered by DOE if the Yucca Mountain site is for any reason not selected to be the DOE site receiving high level radioactive waste or spent reactor fuel. If alternative potential sites have

195

Microsoft Word - FOIA Log FY 2002.doc  

NLE Websites -- All DOE Office Websites (Extended Search)

FOIA - Request Log FOIA - Request Log 1 Closed/ Date No. Dated Date Rec'd HQ or Dir. Subject Yes/ 1/30/02 001 12/3/02 12/21/02 Richland Transfer Richland Operation Office search for records they located documents originated by the DOE Carlsbad Field Office that may be responsive to Mr. Hongs request. By transfer of this letter they forwarded Mr. Hong request, along with the documents located at Richland to the Carlsbad FOIA Office. CBFO will respond directly to Mr. Hong with a release determination Yes/ 2/13/02 002 1/30/02 1/30/02 Direct Description of request: answers to 1) What is the makeup of the additional 2 MT now bound for WIPP? What sites will come from, in what quantities, and in what form? 2) What type of NEPA documentation will DOE conduct on this additional 2 MT? (Note: Disposal of this material

196

Microsoft Word - FOIA Log FY 2003.doc  

NLE Websites -- All DOE Office Websites (Extended Search)

3 FOIA - Request Log 3 FOIA - Request Log 1 Closed/ Date No. Dated Date Rec'd HQ or Dir. Subject Yes/ 11/03/03 001 12/16/02 1/7/03 Transfer from HQ Documentation provided identifying all Waste Isolation Pilot Plant contractors and their sub- contractors, as well as the principals for those entities. Yes 2/20/04 002 12/16/02 1/7/03 Transfer from HQ Documentation provided concerning the following Waste Isolation Pilot Plant related items: 1) Notify as to whether any portion of Westinghouse TRU Solutions work has been outsourced or privatized, and identify the outsource contact affected employees, 2) Notify as to whether environmental work done by Westinghouse TRU Solutions has undergone any changes involving position within company structure, management personnel, addition or deletions to scope of

197

INSPIRE and SPIRES Log File Analysis  

Science Conference Proceedings (OSTI)

SPIRES, an aging high-energy physics publication data base, is in the process of being replaced by INSPIRE. In order to ease the transition from SPIRES to INSPIRE it is important to understand user behavior and the drivers for adoption. The goal of this project was to address some questions in regards to the presumed two-thirds of the users still using SPIRES. These questions are answered through analysis of the log files from both websites. A series of scripts were developed to collect and interpret the data contained in the log files. The common search patterns and usage comparisons are made between INSPIRE and SPIRES, and a method for detecting user frustration is presented. The analysis reveals a more even split than originally thought as well as the expected trend of user transition to INSPIRE.

Adams, Cole; /Wheaton Coll. /SLAC

2012-08-31T23:59:59.000Z

198

Chiral gravity, log gravity, and extremal CFT  

Science Conference Proceedings (OSTI)

We show that the linearization of all exact solutions of classical chiral gravity around the AdS{sub 3} vacuum have positive energy. Nonchiral and negative-energy solutions of the linearized equations are infrared divergent at second order, and so are removed from the spectrum. In other words, chirality is confined and the equations of motion have linearization instabilities. We prove that the only stationary, axially symmetric solutions of chiral gravity are BTZ black holes, which have positive energy. It is further shown that classical log gravity--the theory with logarithmically relaxed boundary conditions--has finite asymptotic symmetry generators but is not chiral and hence may be dual at the quantum level to a logarithmic conformal field theories (CFT). Moreover we show that log gravity contains chiral gravity within it as a decoupled charge superselection sector. We formally evaluate the Euclidean sum over geometries of chiral gravity and show that it gives precisely the holomorphic extremal CFT partition function. The modular invariance and integrality of the expansion coefficients of this partition function are consistent with the existence of an exact quantum theory of chiral gravity. We argue that the problem of quantizing chiral gravity is the holographic dual of the problem of constructing an extremal CFT, while quantizing log gravity is dual to the problem of constructing a logarithmic extremal CFT.

Maloney, Alexander [Physics Department, McGill University, Montreal, QC H3A 2T8 (Canada); Song Wei [Key Laboratory of Frontiers in Theoretical Physics, Institute of Theoretical Physics, Chinese Academy of Sciences, Beijing, 100190 (China); Center for the Fundamental Laws of Nature Jefferson Physical Laboratory, Harvard University, Cambridge, Massachusetts 02138 (United States); Strominger, Andrew [Center for the Fundamental Laws of Nature Jefferson Physical Laboratory, Harvard University, Cambridge, Massachusetts 02138 (United States)

2010-03-15T23:59:59.000Z

199

Chiral Gravity, Log Gravity and Extremal CFT  

E-Print Network (OSTI)

We show that the linearization of all exact solutions of classical chiral gravity around the AdS3 vacuum have positive energy. Non-chiral and negative-energy solutions of the linearized equations are infrared divergent at second order, and so are removed from the spectrum. In other words, chirality is confined and the equations of motion have linearization instabilities. We prove that the only stationary, axially symmetric solutions of chiral gravity are BTZ black holes, which have positive energy. It is further shown that classical log gravity-- the theory with logarithmically relaxed boundary conditions --has finite asymptotic symmetry generators but is not chiral and hence may be dual at the quantum level to a logarithmic CFT. Moreover we show that log gravity contains chiral gravity within it as a decoupled charge superselection sector. We normally evaluate the Euclidean sum over geometries of chiral gravity and show that it gives precisely the holomorphic extremal CFT partition function. The modular invariance and integrality of the expansion coefficients of this partition function are consistent with the existence of an exact quantum theory of chiral gravity. We argue that the problem of quantizing chiral gravity is the holographic dual of the problem of constructing an extremal CFT, while quantizing log gravity is dual to the problem of constructing a logarithmic extremal CFT.

Alexander Maloney; Wei Song; Andrew Strominger

2009-03-26T23:59:59.000Z

200

Precision pressure/temperature logging tool  

DOE Green Energy (OSTI)

Past memory logging tools have provided excellent pressure/temperature data when used in a geothermal environment, and they are easier to maintain and deploy than tools requiring an electric wireline connection to the surface. However, they are deficient since the tool operator is unaware of downhole conditions that could require changes in the logging program. Tools that make ``decisions`` based on preprogrammed scenarios can partially overcome this difficulty, and a suite of such memory tools has been developed at Sandia National Laboratories. The first tool, which forms the basis for future instruments, measures pressure and temperature. Design considerations include a minimization of cost while insuring quality data, size compatibility with diamond-cored holes, operation in holes to 425 C (800 F), transportability by ordinary passenger air service, and ease of operation. This report documents the development and construction of the pressure/temperature tool. It includes: (1) description of the major components; (2) calibration; (3) typical logging scenario; (4) tool data examples; and (5) conclusions. The mechanical and electrical drawings, along with the tool`s software, will be furnished upon request.

Henfling, J.A.; Normann, R.A.

1998-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "activity acoustic logs" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

location privacy based on trusted computing and secure logging  

E-Print Network (OSTI)

Many operators of cellphone networks now offer locationbased services to their customers, whereby an operator often outsources service provisioning to a third-party provider. Since a persons location could reveal sensitive information about the person, the operator must ensure that the service provider processes location information about the operators customers in a privacy-preserving way. So far, this assurance has been based on a legal contract between the operator and the provider. However, there has been no technical mechanism that lets the operator verify whether the provider adheres to the privacy policy outlined in the contract. We propose an architecture for location-based services based on Trusted Computing and Secure Logging that provides such a technical mechanism. Trusted Computing lets an operator query the configuration of a location-based service. The operator will hand over location information to the service only if the service is configured such that the service provider cannot get access to location information using software-based attacks. This includes passive attacks, where the provider monitors information flowing into and out of its service, and active attacks, where the provider modifies or injects customer queries to the service. We introduce several requirements that must be satisfied by a location-based service to defend against passive attacks. Furthermore, we present Secure Logging, an auditing mechanism to defend against active attacks.

Urs Hengartner

2008-01-01T23:59:59.000Z

202

Resistivity Log At Alum Area (Moos & Ronne, 2010) | Open Energy Information  

Open Energy Info (EERE)

Page Page Edit History Facebook icon Twitter icon » Resistivity Log At Alum Area (Moos & Ronne, 2010) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Single-Well and Cross-Well Resistivity At Alum Geothermal Area (Moos & Ronne, 2010) Exploration Activity Details Location Alum Geothermal Area Exploration Technique Single-Well and Cross-Well Resistivity Activity Date Usefulness useful DOE-funding Unknown Notes Density and electrical resistivity data were important to calibrate structural models based on surface surveys. Fluid flow appeared to be concentrated beneath the detachment within an interval in which some mud losses occurred while drilling, and shallow-reading resistivity logs recorded much lower values than deeper-reading logs suggesting that

203

Traveling Salesman Problem Formulations with N log N Number of ...  

E-Print Network (OSTI)

time reducing the number of binary variables to O(N log2 N). The expense is the increase in the constraint set cardinality measuring at O(N2 log2 N), and in the...

204

Results of investigations at the Zunil geothermal field, Guatemala: Well logging and brine geochemistry  

DOE Green Energy (OSTI)

The well logging team from Los Alamos and its counterpart from Central America were tasked to investigate the condition of four producing geothermal wells in the Zunil Geothermal Field. The information obtained would be used to help evaluate the Zunil geothermal reservoir in terms of possible additional drilling and future power plant design. The field activities focused on downhole measurements in four production wells (ZCQ-3, ZCQ-4, ZCQ-5, and ZCQ-6). The teams took measurements of the wells in both static (shut-in) and flowing conditions, using the high-temperature well logging tools developed at Los Alamos National Laboratory. Two well logging missions were conducted in the Zunil field. In October 1988 measurements were made in well ZCQ-3, ZCQ-5, and ZCQ-6. In December 1989 the second field operation logged ZCQ-4 and repeated logs in ZCQ-3. Both field operations included not only well logging but the collecting of numerous fluid samples from both thermal and nonthermal waters. 18 refs., 22 figs., 7 tabs.

Adams, A.; Dennis, B.; Van Eeckhout, E.; Goff, F.; Lawton, R.; Trujillo, P.E.; Counce, D.; Archuleta, J. (Los Alamos National Lab., NM (USA)); Medina, V. (Instituto Nacional de Electrificacion, Guatemala City (Guatemala). Unidad de Desarollo Geotermico)

1991-07-01T23:59:59.000Z

205

Change Log for the e-Handbook of Statistical Methods  

Science Conference Proceedings (OSTI)

Change Log for the Handbook. Introduction, This page documents changes made to the online version of the Handbook. ...

2013-11-27T23:59:59.000Z

206

Cylindrical Acoustic Levitator/Concentrator  

NLE Websites -- All DOE Office Websites (Extended Search)

Cylindrical Acoustic Levitator/Concentrator Cylindrical Acoustic Levitator/Concentrator Cylindrical Acoustic Levitator/Concentrator A low-power, inexpensive acoustic apparatus for levitation and/or concentration of aerosols and small liquid/solid samples having particulates up to several millimeters in diameter in air or other fluids is described. Available for thumbnail of Feynman Center (505) 665-9090 Email Cylindrical Acoustic Levitator/Concentrator A low-power, inexpensive acoustic apparatus for levitation and/or concentration of aerosols and small liquid/solid samples having particulates up to several millimeters in diameter in air or other fluids is described. It is constructed from a commercially available, hollow cylindrical piezoelectric crystal which has been modified to tune the resonance frequency of the breathing mode resonance of the crystal to that

207

Chukwa: a system for reliable large-scale log collection  

Science Conference Proceedings (OSTI)

Large Internet services companies like Google, Yahoo, and Facebook use the MapReduce programming model to process log data. MapReduce is designed to work on data stored in a distributed filesystem like Hadoop's HDFS. As a result, a number of log collection ... Keywords: logging, research, scale

Ariel Rabkin; Randy Katz

2010-11-01T23:59:59.000Z

208

Acoustic Enhancement of Photodetecting Devices  

for suspect materials, to advanced weapons guidance. Using a high Q acoustic resonator, the invention increases the sensitivity of the detectors by an order of

209

Cylindrical Acoustic Levitator/Concentrator  

NLE Websites -- All DOE Office Websites (Extended Search)

A low-power, inexpensive acoustic apparatus for levitation andor concentration of aerosols and small liquidsolid samples having particulates up to several millimeters in...

210

Geothermal well log interpretation. Progress report  

DOE Green Energy (OSTI)

Progress is presented on the following tasks: review of the state-of-the-art, classification of geothermal reservoir types, data acquisition, problem definition and directions for solution, and refinement of existing interpretation techniques and development of new ones. Computerized literature searches were conducted. The classification system defines five major characteristics which will qualify a potential reservoir. A catalog lists well logs currently available for study. Rock and fluid parameters needed for reservoir studies are listed. A list of matrix characteristics for rocks and minerals is given. (MHR)

Not Available

1978-01-01T23:59:59.000Z

211

Min-cuts and Shortest Cycles in Planar Graphs in O(n log log n) Time  

E-Print Network (OSTI)

We present a deterministic O(n log log n) time algorithm for finding shortest cycles and minimum cuts in planar graphs. The algorithm improves the previously known fastest algorithm by Italiano et al. in STOC'11 by a factor of log n. This speedup is obtained through the use of dense distance graphs combined with a divide-and-conquer approach.

\\L\\kacki, Jakub

2011-01-01T23:59:59.000Z

212

The Borneo Project : Indonesia Fails to Stop Illegal Logging, Report Says Indonesia Fails to Stop Illegal Logging, Report Says  

E-Print Network (OSTI)

The Borneo Project : Indonesia Fails to Stop Illegal Logging, Report Says Indonesia Fails to Stop Illegal Logging, Report Says by Irwan Firdaus, The Associated Press January 15th, 2003 JAKARTA, Indonesia -- Corruption in Indonesia's police and military has contributed to a surge in illegal logging that has

213

Building Energy Software Tools Directory: Acoustics Program  

NLE Websites -- All DOE Office Websites (Extended Search)

Acoustics Program Developed to help designers accurately model the sound level reaching building tenant's ears, the Trane Acoustics Program (TAP) "projects" equipment sound power...

214

Microsoft Word - FOIA Log FY 2005.doc  

NLE Websites -- All DOE Office Websites (Extended Search)

5 FOIA - Request Log 5 FOIA - Request Log 1 Closed/ Date No. Dated Date Rec'd HQ or Dir. Subject Yes 02/23/05 001 02/16/05 02/16/05 Direct Copies of the 2004 Modifications to the Westinghouse TRU Solutions contract (No. DE-AC- 04-01AL66444) for the management and operation of the Waste Isolation Pilot Plant. Yes 04/12/05 002 04/11/05 04/11/05 Direct Copies of the scope of work statement for the EE&G Oversight contract for the Waste Isolation Pilot Plant, dated 1999 or 2000 Yes 04/29/05 003 04/20/05 04/20/05 Direct (1) A copy of the Winning Proposal for RFP No. DE-AC04-89AL58309 (A036), entitled Environmental Evaluation Group (EEG) Oversight Contract for the Waste Isolation Pilot Plant. Subject RFO was issued in FY 2001, and we believe the initials contract was awarded to a company named EG&G.

215

Geothermal Logging Instrumentation Development Program Plan (U)  

DOE Green Energy (OSTI)

This Geothermal Logging Instrumentation Development Program Plan outlines a nine-year, industry-based program to develop and apply high temperature instrumentation technology which is needed by the borehole logging industry to serve the rapidly expanding geothermal market. Specifically, this program will upgrade existing materials and sondes to improve their high-temperature reliability. To achieve this goal specialized equipment such as high temperature electronics, cables and devices for measuring formation temperature, flow rate, downhole pressure, and fractures will be developed. In order to satisfy critical existing needs, the near-term (FY80) goal is for operation at or above 275/sup 0/C in pressures up to 48.3 MPa (7,000 psi). The long-term (FY84) goal is for operation up to 350/sup 0/C and 138 MPa (20,000 psi). This program plan has been prepared for the Department of Energy's Division of Geothermal Energy (DGE) and is a portion of the DGE long-range Geothermal Well Technology Program.

Veneruso, A.F.; Polito, J.; Heckman, R.C.

1978-08-01T23:59:59.000Z

216

Dewarless Logging Tool - 1st Generation  

DOE Green Energy (OSTI)

This report focuses on Sandia National Laboratories' effort to create high-temperature logging tools for geothermal applications without the need for heat shielding. One of the mechanisms for failure in conventional downhole tools is temperature. They can only survive a limited number of hours in high temperature environments. For the first time since the evolution of integrated circuits, components are now commercially available that are qualified to 225 C with many continuing to work up to 300 C. These components are primarily based on Silicon-On-Insulator (SOI) technology. Sandia has developed and tested a simple data logger based on this technology that operates up to 300 C with a few limiting components operating to only 250 C without thermal protection. An actual well log to 240 C without shielding is discussed. The first prototype high-temperature tool measures pressure and temperature using a wire-line for power and communication. The tool is based around the HT83C51 microcontroller. A brief discussion of the background and status of the High Temperature Instrumentation program at Sandia, objectives, data logger development, and future project plans are given.

HENFLING,JOSEPH A.; NORMANN,RANDY A.

2000-08-01T23:59:59.000Z

217

Microsoft Word - FOIA Log FY 2007.doc  

NLE Websites -- All DOE Office Websites (Extended Search)

7 FOIA - Request Log 7 FOIA - Request Log 1 Closed/ Date No. Dated Date Rec'd HQ or Dir. Subject Finalized 02/08/07 001 10/05/06 01/08/07 Transfer from DOE- EM-CBC Copies of contract modifications, performance evaluations, task orders and task order proposals related to contract AT30-05EW03000 with Navarro Research and Engineering, Inc. Finalized 01/31/07 002 01/11/07 01/11/07 Direct For a copy of contract DE-AC04-95AL89446 for the period of September 1995 through the end of the contract. Also, if not included in the above, a copy of the special provisions for the contract specifying the role of the CTAC Program Manager as the single point of contact with DOE. Finalized 02/06/07 003 01/31/07 02/05/07 Transfer from DOE/HQ Copies of the U.S. Department of Energy's ten oldest open or pending Freedom of

218

Formation Micro-Imager Logs (FMI) | Open Energy Information  

Open Energy Info (EERE)

Formation Micro-Imager Logs (FMI) Formation Micro-Imager Logs (FMI) Jump to: navigation, search OpenEI Reference LibraryAdd to library Web Site: Formation Micro-Imager Logs (FMI) Author Shakeel Ahmed Published Publisher Not Provided, 2013 DOI Not Provided Check for DOI availability: http://crossref.org Online Internet link for Formation Micro-Imager Logs (FMI) Citation Shakeel Ahmed. Formation Micro-Imager Logs (FMI) [Internet]. 2013. [cited 2013/10/09]. Available from: http://petphy.blogspot.com/2011/12/formation-micro-imager-logs-fmi.html Retrieved from "http://en.openei.org/w/index.php?title=Formation_Micro-Imager_Logs_(FMI)&oldid=687994" Categories: References Geothermal References Uncited References What links here Related changes Special pages Printable version Permanent link Browse properties

219

The electron geodesic acoustic mode  

Science Conference Proceedings (OSTI)

In this report, a novel new mode, named the electron geodesic acoustic mode, is presented. This mode can occur in toroidal plasmas like the conventional geodesic acoustic mode (GAM). The frequency of this new mode is much larger than that of the conventional GAM by a factor equal to the square root of the ion to electron mass ratio.

Chakrabarti, N. [Saha Institute of Nuclear Physics, 1/AF Bidhannagar, Calcutta 700 064 (India); Guzdar, P. N. [Institute for Research in Electronics and Applied Physics, University of Maryland, College Park, Maryland 20742 (United States); Kaw, P. K. [Institute for Plasma Research Bhat, Gandhinagar 382428 (India)

2012-09-15T23:59:59.000Z

220

Acoustics sound systems for baseball  

Science Conference Proceedings (OSTI)

Acoustic considerations impact the design of sound systems for baseball stadiums in several important ways. Intrusion by the sound system into adjacent residential communities must often be minimized. Excess attenuation greatly increases the required high frequency component of acoustic power for sound travelling long distances

2001-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "activity acoustic logs" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Opto-acoustic thrombolysis  

DOE Patents (OSTI)

This invention is a catheter-based device for generating an ultrasound excitation in biological tissue. Pulsed laser light is guided through an optical fiber to provide the energy for producing the acoustic vibrations. The optical energy is deposited in a water-based absorbing fluid, e.g. saline, thrombolytic agent, blood or thrombus, and generates an acoustic impulse in the fluid through thermoelastic and/or thermodynamic mechanisms. By pulsing the laser at a repetition rate (which may vary from 10 Hz to 100 kHz) an ultrasonic radiation field can be established locally in the medium. This method of producing ultrasonic vibrations can be used in vivo for the treatment of stroke-related conditions in humans, particularly for dissolving thrombus or treating vasospasm. The catheter can also incorporate thrombolytic drug treatments as an adjunct therapy and it can be operated in conjunction with ultrasonic detection equipment for imaging and feedback control and with optical sensors for characterization of thrombus type and consistency.

Celliers, Peter (Berkeley, CA); Da Silva, Luiz (Danville, CA); Glinsky, Michael (Livermore, CA); London, Richard (Orinda, CA); Maitland, Duncan (Livermore, CA); Matthews, Dennis (Moss Beach, CA); Fitch, Pat (Livermore, CA)

2000-01-01T23:59:59.000Z

222

Opto-acoustic thrombolysis  

Science Conference Proceedings (OSTI)

This invention is a catheter-based device for generating an ultrasound excitation in biological tissue. Pulsed laser light is guided through an optical fiber to provide the energy for producing the acoustic vibrations. The optical energy is deposited in a water-based absorbing fluid, e.g. saline, thrombolytic agent, blood or thrombus, and generates an acoustic impulse in the fluid through thermoelastic and/or thermodynamic mechanisms. By pulsing the laser at a repetition rate (which may vary from 10 Hz to 100 kHz) an ultrasonic radiation field can be established locally in the medium. This method of producing ultrasonic vibrations can be used in vivo for the treatment of stroke-related conditions in humans, particularly for dissolving thrombus or treating vasospasm. The catheter can also incorporate thrombolytic drug treatments as an adjunct therapy and it can be operated in conjunction with ultrasonic detection equipment for imaging and feedback control and with optical sensors for characterization of thrombus type and consistency.

Celliers, P.; Silva, L. Da; Glinsky, M.; London, R.; Maitland, D.; Matthews, D.; Fitch, P.

2000-02-08T23:59:59.000Z

223

Log-based Longitudinal Study Finds Window Thrashing  

E-Print Network (OSTI)

Although large displays are becoming more cost effective, most user interfaces are optimized for a single monitor of modest size even though many traditional workspaces such as desks and workbenches are much larger and some studies have found benefits from large displays. This paper explores whether a single monitor is sufficient for information work using standard software. A log-based longitudinal field study finds that most of the time a single monitor allows skilled information analysts to have a reasonable pattern of window activity. However, a novel visualization of the data shows that windows typically fill the monitor and the pattern is occasionally interrupted by window thrashing, the rapid manipulation of windows caused by limited display resource. Given these findings, we identify some common tasks that justify the development and the expense of wideband visual interfaces that are optimized for larger displays.

Jock Mackinlay And

2004-01-01T23:59:59.000Z

224

Armored instrumentation cable for geothermal well logging  

DOE Green Energy (OSTI)

Multiconductor armored well-logging cable is used extensively by the oil and natural gas industry to lower various instruments used to measure the geological and geophysical parameters into deep wellbores. Advanced technology in oil-well drilling makes it possible to achieve borehole depths of 9 km (30,000 ft). The higher temperatures in these deeper boreholes demand advancements in the design and manufacturing of wireline cable and in the electrical insulating and armoring materials used as integral components. If geothermal energy is proved an abundant economic resource, drilling temperatures approaching and exceeding 300/sup 0/C will become commonplace. The adaptation of teflons as electrical insulating material permitted use of armored cable in geothermal wellbores where temperatures are slightly in excess of 200/sup 0/C, and where the concentrations of corrosive minerals and gases are high. Teflon materials presently used in wireline cables, however, are not capable of continuous operation at the anticipated higher temperatures.

Dennis, B.R.; Johnson, J.; Todd, B.

1981-01-01T23:59:59.000Z

225

Acoustic Inspection Devices: Detecting the Undetectable  

Acoustic Inspection Devices: Detecting the Undetectable Emerging homeland security threats and increasingly sophisticated adversaries have heightened ...

226

Geophysical well logging operations and log analysis in Geothermal Well Desert Peak No. B-23-1  

DOE Green Energy (OSTI)

Geothermal Well Desert Peak No. B-23-1 was logged by Dresser Atlas during April/May 1979 to a total depth of 2939 m (9642 ft). A temperature of 209/sup 0/C (408/sup 0/F) was observed on the maximum thermometer run with one of the logging tools. Borehole tools rated to a maximum temperature of 204.4/sup 0/C (400/sup 0/F) were utilized for logging except for the Densilog tool, which was from the other set of borehole instruments, rated to a still higher temperature, i.e., 260/sup 0/C (500/sup 0/F). The quality of the logs recorded and the environmental effects on the log response have been considered. The log response in the unusual lithologies of igneous and metamorphic formations encountered in this well could be correlated with the drill cutting data. An empirical, statistical log interpretation approach has made it possible to obtain meaningful information on the rocks penetrated. Various crossplots/histograms of the corrected log data have been generated on the computer. These are found to provide good resolution between the lithological units in the rock sequence. The crossplotting techniques and the statistical approach were combined with the drill cutting descriptions in order to arrive at the lithological characteristics. The results of log analysis and recommendations for logging of future wells have been included.

Sethi, D.K.; Fertl, W.H.

1980-03-01T23:59:59.000Z

227

Green Energy Resources Inc formerly New York International Log Lumber  

Open Energy Info (EERE)

New York International Log Lumber New York International Log Lumber Company Jump to: navigation, search Name Green Energy Resources Inc (formerly New York International Log & Lumber Company) Place San Antonio, Texas Product GRGR aims to export wood fiber fuel, that is environmentally certified, to overseas power generation utilities. References Green Energy Resources Inc (formerly New York International Log & Lumber Company)[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Green Energy Resources Inc (formerly New York International Log & Lumber Company) is a company located in San Antonio, Texas . References ↑ "Green Energy Resources Inc (formerly New York International Log & Lumber Company)"

228

Micro-Conductivity Imager Logging Tool | Open Energy Information  

Open Energy Info (EERE)

Micro-Conductivity Imager Logging Tool Micro-Conductivity Imager Logging Tool Jump to: navigation, search OpenEI Reference LibraryAdd to library Web Site: Micro-Conductivity Imager Logging Tool Author Hemisphere Technologies Published Publisher Not Provided, 2011 DOI Not Provided Check for DOI availability: http://crossref.org Online Internet link for Micro-Conductivity Imager Logging Tool Citation Hemisphere Technologies. Micro-Conductivity Imager Logging Tool [Internet]. 2011. [cited 2013/10/09]. Available from: http://www.hemisphereoil.com/mcit.html Retrieved from "http://en.openei.org/w/index.php?title=Micro-Conductivity_Imager_Logging_Tool&oldid=687995" Categories: References Geothermal References Uncited References What links here Related changes Special pages Printable version Permanent link

229

Western tight gas sands advanced logging workshop proceedings  

SciTech Connect

An advanced logging research program is one major aspect of the Western Tight Sands Program. Purpose of this workshop is to help BETC define critical logging needs for tight gas sands and to allow free interchange of ideas on all aspects of the current logging research program. Sixteen papers and abstracts are included together with discussions. Separate abstracts have been prepared for the 12 papers. (DLC)

Jennings, J B; Carroll, Jr, H B [eds.

1982-04-01T23:59:59.000Z

230

Real-time classification via sparse representation in acoustic sensor networks  

Science Conference Proceedings (OSTI)

Acoustic Sensor Networks (ASNs) have a wide range of applications in natural and urban environment monitoring, as well as indoor activity monitoring. In-network classification is critically important in ASNs because wireless transmission costs several ... Keywords: ℓ1 minimization, acoustic sensor networks (ASNs), audio classification, sparse approximation

Bo Wei, Mingrui Yang, Yiran Shen, Rajib Rana, Chun Tung Chou, Wen Hu

2013-11-01T23:59:59.000Z

231

Acoustical heat-pumping engine  

DOE Patents (OSTI)

The disclosure is directed to an acoustical heat pumping engine without moving seals. A tubular housing holds a compressible fluid capable of supporting an acoustical standing wave. An acoustical driver is disposed at one end of the housing and the other end is capped. A second thermodynamic medium is disposed in the housing near to but spaced from the capped end. Heat is pumped along the second thermodynamic medium toward the capped end as a consequence both of the pressure oscillation due to the driver and imperfect thermal contact between the fluid and the second thermodynamic medium.

Wheatley, J.C.; Swift, G.W.; Migliori, A.

1981-08-14T23:59:59.000Z

232

Geophysical logs from water wells in the Yakima area, Washington  

DOE Green Energy (OSTI)

The logs include: natural gamma, gamma gamma, neutron neutron, neutron gamma, caliper, fluid temperature, fluid resistivity, wall resistivity, spontaneous potential, and flow meter.

Biggane, J.H.

1983-01-01T23:59:59.000Z

233

Selecting The Optimal Logging Suite For Geothermal Reservoir...  

Open Energy Info (EERE)

suggesting that pulsed neutron logs may not in many cases be needed, and density and electrical resistivity data were important to calibrate structural models based on surface...

234

VEHICLE USAGE LOG Department ________________________________________ Vehicle Homebase ____________________________ Week Ended (Sunday) _________________  

E-Print Network (OSTI)

VEHICLE USAGE LOG Department ________________________________________ Vehicle Homebase of the owning Unit. Vehicle Homebase: Enter the City, Zip Code, Building, or other location designation. Week

Johnston, Daniel

235

Traveling Salesman Problem Formulations with $N \\log N$ Number ...  

E-Print Network (OSTI)

Feb 13, 2013 ... Traveling Salesman Problem Formulations with $N \\log N$ Number of Binary Variables. Thomas A. Pogiatzis(tp309 ***at*** cam.ac.uk)

236

Resistivity Log At The Needles Area (DOE GTP) | Open Energy Information  

Open Energy Info (EERE)

source source History View New Pages Recent Changes All Special Pages Semantic Search/Querying Get Involved Help Apps Datasets Community Login | Sign Up Search Page Edit History Facebook icon Twitter icon » Resistivity Log At The Needles Area (DOE GTP) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Single-Well and Cross-Well Resistivity At The Needles Area (DOE GTP) Exploration Activity Details Location The Needles Area Exploration Technique Single-Well and Cross-Well Resistivity Activity Date Usefulness not indicated DOE-funding Unknown References (1 January 2011) GTP ARRA Spreadsheet Retrieved from "http://en.openei.org/w/index.php?title=Resistivity_Log_At_The_Needles_Area_(DOE_GTP)&oldid=689880" Categories: Exploration Activities

237

Resistivity Log At Fort Bliss Area (DOE GTP) | Open Energy Information  

Open Energy Info (EERE)

source source History View New Pages Recent Changes All Special Pages Semantic Search/Querying Get Involved Help Apps Datasets Community Login | Sign Up Search Page Edit History Facebook icon Twitter icon » Resistivity Log At Fort Bliss Area (DOE GTP) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Single-Well and Cross-Well Resistivity At Fort Bliss Area (DOE GTP) Exploration Activity Details Location Fort Bliss Area Exploration Technique Single-Well and Cross-Well Resistivity Activity Date Usefulness not indicated DOE-funding Unknown References (1 January 2011) GTP ARRA Spreadsheet Retrieved from "http://en.openei.org/w/index.php?title=Resistivity_Log_At_Fort_Bliss_Area_(DOE_GTP)&oldid=689878" Categories: Exploration Activities

238

Acoustic Backscatter from Turbulent Microstructure  

Science Conference Proceedings (OSTI)

Acoustic backscatter has produced spectacular images of internal ocean processes for nearly two decades, but interpretation of the images remains ambiguous because several mechanisms can generate measurable backscatter. The authors present what ...

Harvey E. Seim; Michael C. Gregg; R. T. Miyamoto

1995-04-01T23:59:59.000Z

239

Acoustically Enhanced Boiling Heat Transfer  

E-Print Network (OSTI)

An acoustic field is used to increase the critical heat flux (CHF) of a flat-boiling-heat-transfer surface. The increase is a result of the acoustic effects on the vapor bubbles. Experiments are performed to explore the effects of an acoustic field on vapor bubbles in the vicinity of a rigid-heated wall. Work includes the construction of a novel heater used to produce a single vapor bubble of a prescribed size and at a prescribed location on a flatboiling surface for better study of an individual vapor bubble's reaction to the acoustic field. Work also includes application of the results from the single-bubble heater to a calibrated-copper heater used for quantifying the improvements in CHF.

Z. W. Douglas; M. K. Smith; A. Glezer

2008-01-07T23:59:59.000Z

240

Acoustic Characterization of Mesoscale Objects  

SciTech Connect

This report describes the science and engineering performed to provide state-of-the-art acoustic capabilities for nondestructively characterizing mesoscale (millimeter-sized) objects--allowing micrometer resolution over the objects entire volume. Materials and structures used in mesoscale objects necessitate the use of (1) GHz acoustic frequencies and (2) non-contacting laser generation and detection of acoustic waves. This effort demonstrated that acoustic methods at gigahertz frequencies have the necessary penetration depth and spatial resolution to effectively detect density discontinuities, gaps, and delaminations. A prototype laser-based ultrasonic system was designed and built. The system uses a micro-chip laser for excitation of broadband ultrasonic waves with frequency components reaching 1.0 GHz, and a path-stabilized Michelson interferometer for detection. The proof-of-concept for mesoscale characterization is demonstrated by imaging a micro-fabricated etched pattern in a 70 {micro}m thick silicon wafer.

Chinn, D; Huber, R; Chambers, D; Cole, G; Balogun, O; Spicer, J; Murray, T

2007-03-13T23:59:59.000Z

Note: This page contains sample records for the topic "activity acoustic logs" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Forest Products: Acoustic Humidity Sensor  

SciTech Connect

The new acoustic sensor, designed as a humidity-control system for the paper and textile industries, can both eliminate overdrying and improve product quality by measuring humidity precisely. This new fact sheet explains how the process works.

Poole, L.; Recca, L.

1999-01-29T23:59:59.000Z

242

NW-MILO Acoustic Data Collection  

SciTech Connect

There is an enduring requirement to improve our ability to detect potential threats and discriminate these from the legitimate commercial and recreational activity ongoing in the nearshore/littoral portion of the maritime domain. The Northwest Maritime Information and Littoral Operations (NW-MILO) Program at PNNLs Coastal Security Institute in Sequim, Washington is establishing a methodology to detect and classify these threats - in part through developing a better understanding of acoustic signatures in a near-shore environment. The purpose of the acoustic data collection described here is to investigate the acoustic signatures of small vessels. The data is being recorded continuously, 24 hours a day, along with radar track data and imagery. The recording began in August 2008, and to date the data contains tens of thousands of signals from small vessels recorded in a variety of environmental conditions. The quantity and variety of this data collection, with the supporting imagery and radar track data, makes it particularly useful for the development of robust acoustic signature models and advanced algorithms for signal classification and information extraction. The underwater acoustic sensing system is part of a multi-modal sensing system that is operating near the mouth of Sequim Bay. Sequim Bay opens onto the Straight of Juan de Fuca, which contains part of the border between the U.S. and Canada. Table 1 lists the specific components used for the NW-MILO system. The acoustic sensor is a hydrophone permanently deployed at a mean depth of about 3 meters. In addition to a hydrophone, the other sensors in the system are a marine radar, an electro-optical (EO) camera and an infra-red (IR) camera. The radar is integrated with a vessel tracking system (VTS) that provides position, speed and heading information. The data from all the sensors is recorded and saved to a central server. The data has been validated in terms of its usability for characterizing the signatures of small vessels. The sampling rate of 8 kHz and low pass filtering to 2 kHz results in an alias-free signal in the frequency band that is appropriate for small vessels. Calibration was performed using a Lubell underwater speaker so that the raw data signal levels can be converted to sound pressure. Background noise is present due to a nearby pump and as a result of tidal currents. More study is needed to fully characterize the noise, but it does not pose an obstacle to using the acoustic data for the purposes of vessel detection and signature analysis. The detection range for a small vessel was estimated using the calibrated voltage response of the system and a cylindrical spreading model for transmission loss. The sound pressure of a typical vessel with an outboard motor was found to be around 140 dB mPa, and could theoretically be detected from 10 km away. In practical terms, a small vessel could reliably be detected from 3 - 5 km away. The data is archived in netCDF files, a standard scientific file format that is "self describing". This means that each data file contains the metadata - timestamps, units, origin, etc. - needed to make the data meaningful and portable. Other file formats, such as XML, are also supported. A visualization tool has been developed to view the acoustic data in the form of spectrograms, along with the coincident radar track data and camera images.

Matzner, Shari; Myers, Joshua R.; Maxwell, Adam R.; Jones, Mark E.

2010-02-17T23:59:59.000Z

243

Employing the complete acoustical palette in teleconferencing design  

Science Conference Proceedings (OSTI)

The prevailing architectural acoustics approach in teleconferencing is Deader is better or No acoustics is better than bad acoustics. In some situations

Peter D'Antonio

1989-01-01T23:59:59.000Z

244

Iterative equalization and decoding applied to underwater acoustic communication  

E-Print Network (OSTI)

1.1 Shallow Underwater Acoustic Channels . . . . . . . .and Decoding Approach for Underwater Acoustic Commu-Equalization and Decoding of Underwater Acoustic Using Array

Sifferlen, James F.

2008-01-01T23:59:59.000Z

245

Policy auditing over incomplete logs: theory, implementation and applications  

Science Conference Proceedings (OSTI)

We present the design, implementation and evaluation of an algorithm that checks audit logs for compliance with privacy and security policies. The algorithm, which we name reduce, addresses two fundamental challenges in compliance checking that arise ... Keywords: audit, formal logic, incomplete logs, privacy policy

Deepak Garg; Limin Jia; Anupam Datta

2011-10-01T23:59:59.000Z

246

Real-Time System Log Monitoring/Analytics Framework  

SciTech Connect

Analyzing system logs provides useful insights for identifying system/application anomalies and helps in better usage of system resources. Nevertheless, it is simply not practical to scan through the raw log messages on a regular basis for large-scale systems. First, the sheer volume of unstructured log messages affects the readability, and secondly correlating the log messages to system events is a daunting task. These factors limit large-scale system logs primarily for generating alerts on known system events, and post-mortem diagnosis for identifying previously unknown system events that impacted the systems performance. In this paper, we describe a log monitoring framework that enables prompt analysis of system events in real-time. Our web-based framework provides a summarized view of console, netwatch, consumer, and apsched logs in real- time. The logs are parsed and processed to generate views of applications, message types, individual/group of compute nodes, and in sections of the compute platform. Also from past application runs we build a statistical profile of user/application characteristics with respect to known system events, recoverable/non-recoverable error messages and resources utilized. The web-based tool is being developed for Jaguar XT5 at the Oak Ridge Leadership Computing facility.

Oral, H Sarp [ORNL; Dillow, David A [ORNL; Park, Byung H [ORNL; Shipman, Galen M [ORNL; Geist, Al [ORNL; Gunasekaran, Raghul [ORNL

2011-01-01T23:59:59.000Z

247

Mining web query logs to analyze political issues  

Science Conference Proceedings (OSTI)

We present a novel approach to using anonymized web search query logs to analyze and visualize political issues. Our starting point is a list of politically annotated blogs (left vs. right). We use this list to assign a numerical political leaning to ... Keywords: opinion mining and sentiment analysis, partisanship, political leaning, web search logs

Ingmar Weber; Venkata Rama Kiran Garimella; Erik Borra

2012-06-01T23:59:59.000Z

248

Time series analysis of a Web search engine transaction log  

Science Conference Proceedings (OSTI)

In this paper, we use time series analysis to evaluate predictive scenarios using search engine transactional logs. Our goal is to develop models for the analysis of searchers' behaviors over time and investigate if time series analysis is a valid method ... Keywords: ARIMA, Box-Jenkins model, Search engine, Time series analysis, Transactional log

Ying Zhang; Bernard J. Jansen; Amanda Spink

2009-03-01T23:59:59.000Z

249

Log Homes in REScheck | Building Energy Codes Program  

NLE Websites -- All DOE Office Websites (Extended Search)

Log Homes in REScheck Log Homes in REScheck This training includes an introduction to how log homes are handled in the REScheck(tm) software and demonstrates how to show compliance for log homes using REScheck. Estimated Length: 56 minutes Presenters: Rob Picket, Log Homes Council Heather Dillon and Pam Cole, Pacific Northwest National Laboratory Original Webcast Date: Thursday, February 16, 2006 - 13:00 CEUs Offered: 1.0 AIA/CES LU (HSW); .10 CEUs towards ICC renewal certification. Course Type: Video Downloads: Presentation Slides Video Watch on YouTube Visit the BECP Online Training Center for instructions on how to obtain a certificate of completion. Building Type: Residential Focus: Compliance Code Version: International Energy Conservation Code (IECC) Software: REScheck Target Audience:

250

Pressure Temperature Log At Steamboat Springs Area (Combs, Et Al., 1999) |  

Open Energy Info (EERE)

Steamboat Springs Area (Combs, Et Al., 1999) Steamboat Springs Area (Combs, Et Al., 1999) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Pressure Temperature Log At Steamboat Springs Area (Combs, Et Al., 1999) Exploration Activity Details Location Steamboat Springs Area Exploration Technique Pressure Temperature Log Activity Date Usefulness could be useful with more improvements DOE-funding Unknown Notes Downhole data during production and injection tests were acquired using pressure/temperature/spinner (PTS) tools from two dtierent service companies. Although details differed, all the commercial downhole instruments were designed to take data and to transmit that data uphole in real time, using a singleconductor wireline. All the instruments (each company used more than one) employed a dewar, or thermal flasIq to protect

251

Resistivity Log At Fish Lake Valley Area (DOE GTP) | Open Energy  

Open Energy Info (EERE)

source source History View New Pages Recent Changes All Special Pages Semantic Search/Querying Get Involved Help Apps Datasets Community Login | Sign Up Search Page Edit History Facebook icon Twitter icon » Resistivity Log At Fish Lake Valley Area (DOE GTP) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Single-Well and Cross-Well Resistivity At Fish Lake Valley Area (DOE GTP) Exploration Activity Details Location Fish Lake Valley Area Exploration Technique Single-Well and Cross-Well Resistivity Activity Date Usefulness not indicated DOE-funding Unknown References (1 January 2011) GTP ARRA Spreadsheet Retrieved from "http://en.openei.org/w/index.php?title=Resistivity_Log_At_Fish_Lake_Valley_Area_(DOE_GTP)&oldid=689876" Categories:

252

Density Log at Valles Caldera - Redondo Area (Wilt & Haar, 1986) | Open  

Open Energy Info (EERE)

Valles Caldera - Redondo Area (Wilt & Haar, 1986) Valles Caldera - Redondo Area (Wilt & Haar, 1986) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Density at Valles Caldera - Redondo Area (Wilt & Haar, 1986) Exploration Activity Details Location Valles Caldera - Redondo Area Exploration Technique Density Log Activity Date Usefulness not indicated DOE-funding Unknown Notes The density log indicates three major density units within the well section : a surface layer of caldera fill, lake deposits, and other recent alluvium (2.12 g/cm3); the Bandelier Tuff and underlying volcanic and sedimentary units (2.3--2.5 g/cm3); and the basement unit, consisting of the lower Paleozoic and the upper Precambrian (2.65 g/cm3). There are, of course, significant density variations within each unit, but for modeling

253

Geothermal well log interpretation state of the art. Final report  

DOE Green Energy (OSTI)

An in-depth study of the state of the art in Geothermal Well Log Interpretation has been made encompassing case histories, technical papers, computerized literature searches, and actual processing of geothermal wells from New Mexico, Idaho, and California. A classification scheme of geothermal reservoir types was defined which distinguishes fluid phase and temperature, lithology, geologic province, pore geometry, salinity, and fluid chemistry. Major deficiencies of Geothermal Well Log Interpretation are defined and discussed with recommendations of possible solutions or research for solutions. The Geothermal Well Log Interpretation study and report has concentrated primarily on Western US reservoirs. Geopressured geothermal reservoirs are not considered.

Sanyal, S.K.; Wells, L.E.; Bickham, R.E.

1980-01-01T23:59:59.000Z

254

Fluid-temperature logs for selected wells in eastern Washington  

DOE Green Energy (OSTI)

This Open-File Report consists of fluid temperature logs compiled during studies of the geohydrology and low temperature geothermal resources of eastern Washington. The fluid temperature logs are divided into two groups. Part A consists of wells which are concentrated in the Moses Lake-Ritzville-Connell area. Full geophysical log suites for many of these wells are presented in Stoffel and Widness (1983) and discussed in Widness (1983, 1984). Part B consists of wells outside of the Moses Lake-Ritzville-Connell study area.

Stoffel, K.L.; Widness, S. (comps.)

1983-12-01T23:59:59.000Z

255

The Design of Acoustic Radar Baffles  

Science Conference Proceedings (OSTI)

Compact acoustic antenna arrays, commonly used for profiling urban atmospheres, usually require acoustic baffles to minimize reflections from hard objects and to limit the impact of the 26-kHz signals on inhabitants. To facilitate optimum ...

C. J. Werkhoven; S. G. Bradley

1997-06-01T23:59:59.000Z

256

Acoustic data transmission through a drill string  

DOE Patents (OSTI)

Acoustical signals are transmitted through a drill string by canceling upward moving acoustical noise and by preconditioning the data in recognition of the comb filter impedance characteristics of the drill string. 5 figs.

Drumheller, D.S.

1988-04-21T23:59:59.000Z

257

Particle analysis in an acoustic cytometer  

SciTech Connect

The present invention is a method and apparatus for acoustically manipulating one or more particles. Acoustically manipulated particles may be separated by size. The particles may be flowed in a flow stream and acoustic radiation pressure, which may be radial, may be applied to the flow stream. This application of acoustic radiation pressure may separate the particles. In one embodiment, the particles may be separated by size, and as a further example, the larger particles may be transported to a central axis.

Kaduchak, Gregory; Ward, Michael D

2012-09-18T23:59:59.000Z

258

Owens Corning Acoustic & Insulation Product Testing ...  

Science Conference Proceedings (OSTI)

... Insulation. [01/T10] ASTM C687 Thermal Resistance of Loose-Fill Building Insulation. Acoustical Testing Services. Accreditation ...

2014-01-03T23:59:59.000Z

259

Acoustic Analysis of Adult Speaker Age  

Science Conference Proceedings (OSTI)

Information about the age of the speaker is always present in speech. It is used as perceptual cues to age by human listeners, and can be measured acoustically and used by automatic age estimators. This chapter offers an introduction to the phonetic ... Keywords: Acoustic analysis, Acoustic correlates, Phonetics, Speaker age

Susanne Schtz

2007-02-01T23:59:59.000Z

260

Logging, Testing and Monitoring Geothermal Wells | Open Energy Information  

Open Energy Info (EERE)

Logging, Testing and Monitoring Geothermal Wells Logging, Testing and Monitoring Geothermal Wells Jump to: navigation, search OpenEI Reference LibraryAdd to library Conference Paper: Logging, Testing and Monitoring Geothermal Wells Abstract Wells or boreholes are essential components in both geothermal research and utilization as they enable a drastic increase in geothermal energy production beyond natural out-flow as well as providing access deep into the systems, not otherwise possible. Wells also play a vital role in all geothermal reservoir physics (also called reservoir engineering) research, which would be particularly ineffec-tive without the access into geothermal systems provided by wells. During drilling the main reservoir physics research is performed through logging of different parameters as functions

Note: This page contains sample records for the topic "activity acoustic logs" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Symposium on high-temperature well-logging instrumentation  

DOE Green Energy (OSTI)

The symposium contains papers about developments in borehole logging instrumentation that can withstand downhole temperatures in excess of 300/sup 0/C and pressures greater than 103 MPa. Separate abstracts have been prepared for individual papers. (ACR)

Dennis, B.R. (comp.)

1986-06-01T23:59:59.000Z

262

Energy Efficiency in Log Homes | Department of Energy  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy Code Compliance Because log homes don't have conventional wood-stud walls and insulation, they often don't satisfy building code energy standards that require...

263

Miniatuization of the flowing fluid electric conductivity logging tec hnique  

E-Print Network (OSTI)

but the excess oil drips into the well and accumulates onwater. In this well, the top of the oil layer began aboutincluding the well we logged, a layer of oil was present

Su, Grace W.; Quinn, Nigel W.T.; Cook, Paul J.; Shipp, William

2005-01-01T23:59:59.000Z

264

Shift Turnover and Log Keeping for Fossil Generating Stations  

Science Conference Proceedings (OSTI)

Decreases in staff productivity, lost generation, and adverse events are occurring in the industry as a result of less-than-effective communication during shift turnovers and log-keeping practices that do not provide sufficient information on plant and equipment status. The shift turnover and log-keeping practices observed at numerous fossil generating stations vary between best in the industry to ineffective, and most stations have had equipment failures and lost efficiencies as a result of less-than-ef...

2010-12-19T23:59:59.000Z

265

Fluid-Rock Characterization and Interactions in NMR Well Logging  

SciTech Connect

The objective of this project was to characterize the fluid properties and fluid-rock interactions that are needed for formation evaluation by NMR well logging. The advances made in the understanding of NMR fluid properties are summarized in a chapter written for an AAPG book on NMR well logging. This includes live oils, viscous oils, natural gas mixtures, and the relation between relaxation time and diffusivity.

Hirasaki, George J.; Mohanty, Kishore K.

2003-02-10T23:59:59.000Z

266

Computerized coal-quality prediction from digital geophysical logs  

SciTech Connect

A digital suite of geophysical logs, including gamma-ray, resistivity and gamma-gamma density, were used to develop and test a method for predicting coal quality parameters for the Wyodak coal in the Powder River basin of Wyoming. The method was developed by plotting the average of various log response increments (obtained from the contractor's 9-track digital tapes) versus the analytically determined ash, moisture, and Btu/lb for the same intervals of the coal seam. Standard curve-fitting techniques were then employed to determine which log response parameter most accurately predicted the various quality parameters. A computer program was written that reads 9-track, digital, log tapes and determines the coal quality parameters based on the relationships between log response and analytical values. The computer program was written in Fortran 77 for a VAX 11/780 minicomputer. The program was designed to run interactively with user-determined options depending on which geophysical logs were available. Preliminary results have been very encouraging to date with predicted versus analytically determined parameters being estimated to an accuracy of +/-300 Btu/lb (with the average being +/-150 Btu/lb), +/-2% ash and +/-3% moisture. This compares to ASTM lab-to-lab analytical standards of +/-100 Btu/lb, +/-0.7% ash, and +/-0.5% moisture. This prediction methods is applicable to coals from other basins and offers promise as a cost saving tool for exploration and production uses.

Nations, D.L.; Tabet, D.E.; Gerould, C.R.

1984-07-01T23:59:59.000Z

267

Monitoring Selective Logging in Tropical Evergreen Forests Using Landsat: Multitemporal Regional Analyses in Mato Grosso, Brazil  

Science Conference Proceedings (OSTI)

Selective logging degrades tropical forests. Logging operations vary in timing, location, and intensity. Evidence of this land use is rapidly obscured by forest regeneration and ongoing deforestation. A detailed study of selective logging ...

Eraldo A. T. Matricardi; David L. Skole; Mark A. Cochrane; Jiaguo Qi; Walter Chomentowski

2005-11-01T23:59:59.000Z

268

Acoustic black holes Matt Visser  

E-Print Network (OSTI)

Acoustic black holes Matt Visser Physics Department Washington University Saint Louis USA Ole Miss you develop a number of use- ful connections between supersonic uid ow and black holes in general is the basis underlying a deep and fruitful analogy between the black holes of Einstein gravity and supersonic

Visser, Matt

269

Tool development and application: pressure, temperature, spectral gamma ray logging of the SB-15 well  

DOE Green Energy (OSTI)

Sandia`s involvement with downhole instrumentation dates from the mid 1970s when work was centered on the development of a high-temperature acoustic borehole televiewer, and the establishment of a list of high- temperature component parts such as resistors, integrated circuits, and sensors. This work evolved into the development of memory logging devices for the US Continental Scientific Drilling Program. These tools were of low cost and very easy to use. Their deployment resulted in scientific advancement in understanding geothermal formations, and a thrust of the current program is to move memory tools from the scientific realm to the commercial environment. The tools developed and utilized in the SB-15 well among other field tests are completely self- contained in that power is obtained from batteries and data are stored in an electronic memory system. Three memory tools form the backbone of the initial Sandia tool suite. Pressure/temperature measurements are necessary for the evaluation of geothermal reservoirs, and they are relatively simple to make. Thus, the initial Sandia program concentrated on such a tool, and it has been successfully used in SB-15. This tool will form the basis for future tools since many engineering principles were proven in its evolution. This pressure/temperature tool combination is very useful in characterizing the geothermal reservoir. Another tool in the Sandia suite measures the natural gamma rays from the formation. This spectral gamma ray tool is useful in defining lithology, paleoflows, and certain clays. SB-15 well logging history and a preliminary interpretation of the data is presented in this report.

Sattler, A.R.; Norman, R.; Henfling, J.A.

1996-12-01T23:59:59.000Z

270

Opto-acoustic transducer for medical applications  

DOE Patents (OSTI)

This invention is an optically activated transducer for generating acoustic vibrations in a biological medium. The transducer is located at the end of a fiber optic which may be located within a catheter. Energy for operating the transducer is provided optically by laser light transmitted through the fiber optic to the transducer. Pulsed laser light is absorbed in the working fluid of the transducer to generate a thermal pressure and consequent adiabatic expansion of the transducer head such that it does work against the ambient medium. The transducer returns to its original state by a process of thermal cooling. The motion of the transducer within the ambient medium couples acoustic energy into the medium. By pulsing the laser at a high repetition rate (which may vary from CW to 100 kHz) an ultrasonic radiation field can be established locally in the medium. This method of producing ultrasonic vibrations can be used in vivo for the treatment of stroke-related conditions in humans, particularly for dissolving thrombus. The catheter may also incorporate anti-thrombolytic drug treatments as an adjunct therapy and it may be operated in conjunction with ultrasonic detection equipment for imaging and feedback control.

Benett, William (Livermore, CA); Celliers, Peter (Berkeley, CA); Da Silva, Luiz (Danville, CA); Glinsky, Michael (Livermore, CA); London, Richard (Orinda, CA); Maitland, Duncan (Livermore, CA); Matthews, Dennis (Moss Beach, CA); Krulevich, Peter (Pleasanton, CA); Lee, Abraham (Walnut Creek, CA)

1999-01-01T23:59:59.000Z

271

Opto-acoustic transducer for medical applications  

DOE Patents (OSTI)

This invention is an optically activated transducer for generating acoustic vibrations in a biological medium. The transducer is located at the end of a fiber optic which may be located within a catheter. Energy for operating the transducer is provided optically by laser light transmitted through the fiber optic to the transducer. Pulsed laser light is absorbed in the working fluid of the transducer to generate a thermal pressure and consequent adiabatic expansion of the transducer head such that it does work against the ambient medium. The transducer returns to its original state by a process of thermal cooling. The motion of the transducer within the ambient medium couples acoustic energy into the medium. By pulsing the laser at a high repetition rate (which may vary from CW to 100 kHz) an ultrasonic radiation field can be established locally in the medium. This method of producing ultrasonic vibrations can be used in vivo for the treatment of stroke-related conditions in humans, particularly for dissolving thrombus. The catheter may also incorporate anti-thrombolytic drug treatments as an adjunct therapy and it may be operated in conjunction with ultrasonic detection equipment for imaging and feedback control.

Benett, William (Livermore, CA); Celliers, Peter (Berkeley, CA); Da Silva, Luiz (Danville, CA); Glinsky, Michael (Livermore, CA); London, Richard (Orinda, CA); Maitland, Duncan (Livermore, CA); Matthews, Dennis (Moss Beach, CA); Krulevich, Peter (Pleasanton, CA); Lee, Abraham (Walnut Creek, CA)

2002-01-01T23:59:59.000Z

272

Opto-acoustic transducer for medical applications  

Science Conference Proceedings (OSTI)

This invention is an optically activated transducer for generating acoustic vibrations in a biological medium. The transducer is located at the end of a fiber optic which may be located within a catheter. Energy for operating the transducer is provided optically by laser light transmitted through the fiber optic to the transducer. Pulsed laser light is absorbed in the working fluid of the transducer to generate a thermal pressure and consequent adiabatic expansion of the transducer head such that it does work against the ambient medium. The transducer returns to its original state by a process of thermal cooling. The motion of the transducer within the ambient medium couples acoustic energy into the medium. By pulsing the laser at a high repetition rate (which may vary from CW to 100 kHz) an ultrasonic radiation field can be established locally in the medium. This method of producing ultrasonic vibrations can be used in vivo for the treatment of stroke-related conditions in humans, particularly for dissolving thrombus. The catheter may also incorporate anti-thrombolytic drug treatments as an adjunct therapy and it may be operated in conjunction with ultrasonic detection equipment for imaging and feedback control. 7 figs.

Benett, W.; Celliers, P.; Da Silva, L.; Glinsky, M.; London, R.; Maitland, D.; Matthews, D.; Krulevich, P.; Lee, A.

1999-08-31T23:59:59.000Z

273

Data Compendium for the Logging Test Pits at the ERDA Grand Junction...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Data Compendium for the Logging Test Pits at the ERDA Grand Junction Compound (December 1975) Data Compendium for the Logging Test Pits at the ERDA Grand Junction Compound...

274

LLNL CATEGORICAL EXCLUSION DETERMINATION FORM ESPD LOG No: !ESH-EFA-NEPA-12-26401  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

CATEGORICAL EXCLUSION DETERMINATION FORM CATEGORICAL EXCLUSION DETERMINATION FORM ESPD LOG No: !ESH-EFA-NEPA-12-26401 I NNSA/LSO LoG No: !NA-12-2~ 1. PROJECT/ACTIVITY TITLE: RADIOGRAPHY OF EXPLOSIVE SAMPLES 8321 C 2. PROJECT DESCRIPTION: I DATE: 8/13/2012 This proposed project would use existing radiography systems located in B321 C to provide useful, non-destntctive, three dimensional imaging and characterization of explosive samples. Current B321 C operations include non- destructive evaluations of up to 10 mg of explosive samples. Storage and use of explosives are controlled to ensure that the facility limits are within the definitions of a LSI hazard classification. The total building inventory of explosives shall not exceed 200 grams for all types of explosives except for Hazard Division 1.4S materials meeting the conditions stated below. The room inventoty

275

LLNL CATEGORICAL EXCLUSION DETERMINATION FORM ESPD LOG No: !ESH-EFA-NEPA-12-26401  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

CATEGORICAL EXCLUSION DETERMINATION FORM CATEGORICAL EXCLUSION DETERMINATION FORM ESPD LOG No: !ESH-EFA-NEPA-12-26401 I NNSA/LSO LoG No: !NA-12-2~ 1. PROJECT/ACTIVITY TITLE: RADIOGRAPHY OF EXPLOSIVE SAMPLES 8321 C 2. PROJECT DESCRIPTION: I DATE: 8/13/2012 This proposed project would use existing radiography systems located in B321 C to provide useful, non-destntctive, three dimensional imaging and characterization of explosive samples. Current B321 C operations include non- destructive evaluations of up to 10 mg of explosive samples. Storage and use of explosives are controlled to ensure that the facility limits are within the definitions of a LSI hazard classification. The total building inventory of explosives shall not exceed 200 grams for all types of explosives except for Hazard Division 1.4S materials meeting the conditions stated below. The room inventoty

276

Acoustic Emission Monitoring of the Syracuse Athena Temple: Scale Invariance in the Timing of Ruptures  

Science Conference Proceedings (OSTI)

We perform a comparative statistical analysis between the acoustic-emission time series from the ancient Greek Athena temple in Syracuse and the sequence of nearby earthquakes. We find an apparent association between acoustic-emission bursts and the earthquake occurrence. The waiting-time distributions for acoustic-emission and earthquake time series are described by a unique scaling law indicating self-similarity over a wide range of magnitude scales. This evidence suggests a correlation between the aging process of the temple and the local seismic activity.

Niccolini, G.; Carpinteri, A.; Lacidogna, G.; Manuello, A. [Istituto Nazionale di Ricerca Metrologica, Strada delle Cacce 91, 10135 Torino (Italy)] [Department of Structural Engineering, Politecnico di Torino, Corso Duca degli Abruzzi 24, 10129 Torino (Italy)

2011-03-11T23:59:59.000Z

277

Multipole logging in a formation with stress-relief-induced anisotropy  

SciTech Connect

The stress relief associated with the drilling of a borehole may induce a mechanically damaged zone with radial transverse isotropy (RTI), where the properties in the radial direction differ from those in the axial and tangential directions. The effect of such a zone on multipole acoustic full-waveform logging is investigated using a numerical model based on the frequency-axial-wavenumber method. Calculations of the spectral behavior show that the fundamental mode associated with the multipole source behaves the same way in a TRI zone as it does in a damaged zone with isotropic properties. In a slow virgin formation, calculations of full waveforms show that the presence of a damaged zone with RTI is more difficult to detect than a damaged zone with isotropic elasticity because the refracted P-wave encounters an isotropic zone but not a RTI zone. The results indicate that a damaged zone with RTI, which is a precursor to destructive events such as borehole instability and sand production, can be detected only by analyzing the spectral behavior of the fundamental mode.

Renlie, L. (IKU Petroleum Research, Trondheim (Norway))

1994-12-01T23:59:59.000Z

278

Connect & Log In | Argonne Leadership Computing Facility  

NLE Websites -- All DOE Office Websites (Extended Search)

Account Information Accounts and Access FAQ Connect & Log In Using CRYPTOCards SSH Keys on Surveyor Disk Space Quota Management Allocations Decommissioning of BG/P Systems and Resources Blue Gene/Q Versus Blue Gene/P Mira/Cetus/Vesta Intrepid/Challenger/Surveyor Tukey Eureka / Gadzooks Policies Documentation Feedback Please provide feedback to help guide us as we continue to build documentation for our new computing resource. [Feedback Form] Connect & Log In Users log into ALCF resources via ssh. ssh mira.alcf.anl.gov -l Resources that are accessible via ssh are vesta.alcf.anl.gov, mira.alcf.anl.gov, surveyor.alcf.anl.gov, intrepid.alcf.anl.gov, cetus.alcf.anl.gov, challenger.alcf.anl.gov, tukey.alcf.anl.gov, eureka.alcf.anl.gov, and gadzooks.alcf.anl.gov.

279

Quantum entanglement for acoustic spintronics  

SciTech Connect

We consider the entanglement of spins for two electrons contributing to the acoustoelectric current driven by a surface acoustic wave (SAW) in two adjacent narrow channels by calculating their exchange energy (J). The channels belong to an acoustic nanocircuit which comprises a network of quasi-one-dimensional pinched-off channels serving as wires along which SAW quantum dots transport electrons. This is motivated by possible practical applications involving quantum information processing and quantum computers. We calculate J as a function of time as the electrons travel side-by-side in the adjacent channels and as a function of the distance between the centers of the channels. The leakage from the state in which the system is prepared, is calculated. The oscillations in the leakage indicate the probability for the electron system to make transitions between the ground and excited states, or for an electron to hop back and forth between channels.

Gumbs, Godfrey; Abranyos, Yonatan [Department of Physics and Astronomy, Hunter College of the City University of New York, 695 Park Avenue, New York, New York 10021 (United States)

2004-11-01T23:59:59.000Z

280

Acoustic horizons in nuclear fluids  

E-Print Network (OSTI)

We consider a hydrodynamic description of the spherically symmetric outward flow of nuclear matter, accommodating dispersion in it as a very weak effect. About the resulting stationary conditions in the flow, we apply an Eulerian scheme to derive a fully nonlinear equation of a time-dependent radial perturbation. In its linearized limit, with no dispersion, this equation implies the static acoustic horizon of an analogue gravity model. We, however, show that time-dependent nonlinear effects destabilize the static horizon. We also model the perturbation as a high-frequency travelling wave, and perform a {\\it WKB} analysis, in which the effect of weak dispersion is studied iteratively. We show that even arbitrarily small values of dispersion make the horizon fully opaque to any acoustic disturbance propagating against the bulk flow, with the amplitude and the energy flux of the radial perturbation undergoing a discontinuity at the horizon, and decaying exponentially just outside it.

Niladri Sarkar; Abhik Basu; Jayanta K. Bhattacharjee; Arnab K. Ray

2013-06-03T23:59:59.000Z

Note: This page contains sample records for the topic "activity acoustic logs" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Cylindrical acoustic levitator/concentrator  

DOE Patents (OSTI)

A low-power, inexpensive acoustic apparatus for levitation and/or concentration of aerosols and small liquid/solid samples having particulates up to several millimeters in diameter in air or other fluids is described. It is constructed from a commercially available, hollow cylindrical piezoelectric crystal which has been modified to tune the resonance frequency of the breathing mode resonance of the crystal to that of the interior cavity of the cylinder. When the resonance frequency of the interior cylindrical cavity is matched to the breathing mode resonance of the cylindrical piezoelectric transducer, the acoustic efficiency for establishing a standing wave pattern in the cavity is high. The cylinder does not require accurate alignment of a resonant cavity. Water droplets having diameters greater than 1 mm have been levitated against the force of gravity using; less than 1 W of input electrical power. Concentration of aerosol particles in air is also demonstrated.

Kaduchak, Gregory (Los Alamos, NM); Sinha, Dipen N. (Los Alamos, NM)

2002-01-01T23:59:59.000Z

282

Solid Rocket Motor Acoustic Testing  

DOE Green Energy (OSTI)

Acoustic data are often required for the determination of launch and powered flight loads for rocket systems and payloads. Such data are usually acquired during test firings of the solid rocket motors. In the current work, these data were obtained for two tests at a remote test facility where we were visitors. This paper describes the data acquisition and the requirements for working at a remote site, interfacing with the test hosts.

Rogers, J.D.

1999-03-31T23:59:59.000Z

283

Logging and Agricultural Residue Supply Curves for the Pacific Northwest  

DOE Green Energy (OSTI)

This report quantified the volume of logging residues at the county level for current timber harvests. The cost of recovering logging residues was determined for skidding, yearding, loading, chipping and transporting the residues. Supply curves were developed for ten candidate conversion sites in the Pacific Northwest Region. Agricultural field residues were also quantified at the county level using five-year average crop yields. Agronomic constraints were applied to arrive at the volumes available for energy use. Collection costs and transportation costs were determined and supply curves generated for thirteen candidate conversion sites.

Kerstetter, James D.; Lyons, John Kim

2001-01-01T23:59:59.000Z

284

SecLaaS: secure logging-as-a-service for cloud forensics  

Science Conference Proceedings (OSTI)

Cloud computing has emerged as a popular computing paradigm in recent years. However, today's cloud computing architectures often lack support for computer forensic investigations. Analyzing various logs (e.g., process logs, network logs) plays a vital ... Keywords: cloud forensics, cloud security, forensic investigation, logging-as-a-service

Shams Zawoad, Amit Kumar Dutta, Ragib Hasan

2013-05-01T23:59:59.000Z

285

Surface acoustic wave probe implant for predicting epileptic seizures  

DOE Patents (OSTI)

A system and method for predicting and avoiding a seizure in a patient. The system and method includes use of an implanted surface acoustic wave probe and coupled RF antenna to monitor temperature of the patient's brain, critical changes in the temperature characteristic of a precursor to the seizure. The system can activate an implanted cooling unit which can avoid or minimize a seizure in the patient.

Gopalsami, Nachappa (Naperville, IL); Kulikov, Stanislav (Sarov, RU); Osorio, Ivan (Leawood, KS); Raptis, Apostolos C. (Downers Grove, IL)

2012-04-24T23:59:59.000Z

286

Acoustic emission monitoring for assessment of steel bridge details  

SciTech Connect

Acoustic emission (AE) testing was deployed on details of two large steel Interstate Highway bridges: one cantilever through-truss and one trapezoidal box girder bridge. Quantitative measurements of activity levels at known and suspected crack locations were made by monitoring AE under normal service loads (e.g., live traffic and wind). AE indications were used to direct application of radiography, resulting in identification of a previously unknown flaw, and to inform selection of a retrofit detail.

Kosnik, D. E.; Corr, D. J. [Infrastructure Technology Institute, Northwestern University, Evanston, IL 60208 (United States); Hopwood, T. [Kentucky Transportation Center, University of Kentucky, Lexington, KY 40506 (United States)

2011-06-23T23:59:59.000Z

287

Surface Measurements of Precipitation from an Ocean Mooring: The Underwater Acoustic Log from the South China Sea  

Science Conference Proceedings (OSTI)

Surface measurements of precipitation in oceanic environments have proven especially difficult to obtain because traditional technologies such as tipping-bucket rain gauges are unsuitable for deployment from oceanic platforms such as ships and ...

Jeffrey A. Nystuen; Michael J. McPhaden; H. Paul Freitag

2000-12-01T23:59:59.000Z

288

Acoustic concentration of particles in fluid flow  

DOE Patents (OSTI)

An apparatus for acoustic concentration of particles in a fluid flow includes a substantially acoustically transparent membrane and a vibration generator that define a fluid flow path therebetween. The fluid flow path is in fluid communication with a fluid source and a fluid outlet and the vibration generator is disposed adjacent the fluid flow path and is capable of producing an acoustic field in the fluid flow path. The acoustic field produces at least one pressure minima in the fluid flow path at a predetermined location within the fluid flow path and forces predetermined particles in the fluid flow path to the at least one pressure minima.

Ward, Michael D. (Los Alamos, NM); Kaduchak, Gregory (Los Alamos, NM)

2010-11-23T23:59:59.000Z

289

DEVELOPMENT OF A LONG WAVELENGTH ACOUSTIC ...  

Science Conference Proceedings (OSTI)

... are developing a long-wavelength acoustic flowmeter (LWAF) for accurate, economical measurements of exhaust flows from coal-burning power ...

290

Wind Turbine Acoustic Noise A white paper  

E-Print Network (OSTI)

Wind Turbine Acoustic Noise A white paper Prepared by the Renewable Energy Research Laboratory...................................................................... 8 Sound from Wind Turbines .............................................................................................. 10 Sources of Wind Turbine Sound

Massachusetts at Amherst, University of

291

Ricoh Company LTD. Acoustical Testing Laboratory  

Science Conference Proceedings (OSTI)

Acoustical Testing Laboratory. ... 143-8555 JAPAN Contact: Mr. Seiji Nakamura Phone: 81-046-292-3871 Fax: E-Mail: seiji.nakamura@nts.ricoh.co.jp ...

2013-11-08T23:59:59.000Z

292

Alion Science and Technology / Riverbank Acoustical ...  

Science Conference Proceedings (OSTI)

... E2179 Laboratory Measurement of the Effectiveness of Floor Coverings in Reducing ... 08/P61] AAMA 1801 Acoustical Rating of Windows, Doors and ...

2013-07-19T23:59:59.000Z

293

THE EFFECT OF ACOUSTIC MODULATION ON SPRAY ...  

Science Conference Proceedings (OSTI)

... that at full load in liquid injection systems, extra energy or perturbation is ... The acoustic modulation is generated by a piezoelectric crystal driven by a ...

294

Time synchronization for underwater acoustic sensor networks.  

E-Print Network (OSTI)

??The unique properties of underwater acoustic communications, such as large and time-varying propagation, low and range dependent bandwidth, and adverse operating environment make the synchronization (more)

Khandoker, Tarik-Ul Islam

2012-01-01T23:59:59.000Z

295

A unified representation of web logs for mining applications  

Science Conference Proceedings (OSTI)

The collective feedback of the users of an Information Retrieval (IR) system has been shown to provide semantic information that, while hard to extract using standard IR techniques, can be useful in Web mining tasks. In the last few years, several approaches ... Keywords: Query recommendations, Query similarity, Query suggestions, Text categorization for the web, User feedback, Web logs

Michelangelo Diligenti; Marco Gori; Marco Maggini

2011-06-01T23:59:59.000Z

296

Vol. 43, No. 3 December 1999 Mariners Weather Log  

E-Print Network (OSTI)

approved by the director of the Office of Management and Budget through December 1999. The Mariners Weather Log (ISSN: 0025-3367) is published by the National Weather Service, Office of Meteorology, Integrated. Rick Kenney, the AMVER Maritime Relations Officer for more information (see contact information

297

Characterizing the usability of interactive applications through query log analysis  

Science Conference Proceedings (OSTI)

People routinely rely on Internet search engines to support their use of interactive systems: they issue queries to learn how to accomplish tasks, troubleshoot problems, and otherwise educate themselves on products. Given this common behavior, we argue ... Keywords: query log analysis, usability

Adam Fourney; Richard Mann; Michael Terry

2011-05-01T23:59:59.000Z

298

Fluid-Rock Characterization and Interactions in NMR Well Logging  

SciTech Connect

The objective of this report is to characterize the fluid properties and fluid-rock interactions that are needed for formation evaluation by NMR well logging. The advances made in the understanding of NMR fluid properties are summarized in a chapter written for an AAPG book on NMR well logging. This includes live oils, viscous oils, natural gas mixtures, and the relation between relaxation time and diffusivity. Oil based drilling fluids can have an adverse effect on NMR well logging if it alters the wettability of the formation. The effect of various surfactants on wettability and surface relaxivity are evaluated for silica sand. The relation between the relaxation time and diffusivity distinguishes the response of brine, oil, and gas in a NMR well log. A new NMR pulse sequence in the presence of a field gradient and a new inversion technique enables the T{sub 2} and diffusivity distributions to be displayed as a two-dimensional map. The objectives of pore morphology and rock characterization are to identify vug connectivity by using X-ray CT scan, and to improve NMR permeability correlation. Improved estimation of permeability from NMR response is possible by using estimated tortuosity as a parameter to interpolate between two existing permeability models.

George J. Hirasaki; Kishore K. Mohanty

2005-09-05T23:59:59.000Z

299

Mining Query Logs: Turning Search Usage Data into Knowledge  

Science Conference Proceedings (OSTI)

Web search engines have stored in their logs information about users since they started to operate. This information often serves many purposes. The primary focus of this survey is on introducing to the discipline of query mining by showing its foundations ...

Fabrizio Silvestri

2010-01-01T23:59:59.000Z

300

Prediction of Web Page Accesses by Proxy Server Log  

Science Conference Proceedings (OSTI)

As the population of web users grows, the variety of user behaviors on accessing information also grows, which has a great impact on the network utilization. Recently, many efforts have been made to analyze user behaviors on the WWW. In this paper, we ... Keywords: WWW, data mining, prediction, proxy server log, suffix tree, user behavior

Yi-Hung Wu; Arbee L. P. Chen

2002-05-01T23:59:59.000Z

Note: This page contains sample records for the topic "activity acoustic logs" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Dual-cone double-helical downhole logging device  

DOE Patents (OSTI)

A broadband downhole logging device includes a double-helix coil wrapped over a dielectric support and surrounded by a dielectric shield. The device may also include a second coil longitudinally aligned with a first coil and enclosed within the same shield for measuring magnetic permeability of downhole formations and six additional coils for accurately determining downhole parameters.

Yu, Jiunn S. (Albuquerque, NM)

1984-01-01T23:59:59.000Z

302

The Search for the Manila Galleon Log Books  

Science Conference Proceedings (OSTI)

Spanish merchant ships, called Manila Galleons, made the round-trip between the Philippine Islands and the ports on the west coast of what is now Mexico, almost every year for the 250-yr period between 1565 and 1815. The log books of these ...

Wayne V. Burt

1990-11-01T23:59:59.000Z

303

Logging threatens Indonesia's biodiversity By Dianthus Saputra Estey in Jakarta  

E-Print Network (OSTI)

Logging threatens Indonesia's biodiversity By Dianthus Saputra Estey in Jakarta Monday 13 October 2003, 16:57 Makka Time, 13:57 GMT A tenth of the world's tropical rainforests lie in Indonesia year," Togu Manurung from Forest Watch Indonesia said. This ranks the depletion of Indonesia

304

SPE-163690-MS Synthetic, Geomechanical Logs for Marcellus Shale  

E-Print Network (OSTI)

SPE-163690-MS Synthetic, Geomechanical Logs for Marcellus Shale M. O. Eshkalak, SPE, S. D of hydrocarbons from the reservoirs, notably shale, is attributed to realizing the key fundamentals of reservoir and mineralogy is crucial in order to identify the "right" pay-zone intervals for shale gas production. Also

Mohaghegh, Shahab

305

Optimal adaptive sampling for continental shelf acoustic forecasting.  

Science Conference Proceedings (OSTI)

Shallow water acoustic propagation variability is driven by bathymetry and geo?acoustic and oceanographic variabilities. At the shelf?break

Kevin D. Heaney

2009-01-01T23:59:59.000Z

306

Reliable Data Communication and Storage in Underwater Acoustic Networks.  

E-Print Network (OSTI)

??Underwater acoustic communications (UAC) and networking (UAN) are promising paradigms for various oceanic applications. However, acoustic signal transmissions are characterized by long propagation delay, frequency-dependent (more)

Cao, Rui

2011-01-01T23:59:59.000Z

307

Acoustical properties of drill strings  

DOE Green Energy (OSTI)

The recovery of petrochemical and geothermal resources requires extensive drilling of wells to increasingly greater depths. Real-time collection and telemetry of data about the drilling process while it occurs thousands of feet below the surface is an effective way of improving the efficiency of drilling operations. Unfortunately, due to hostile down-hole environments, telemetry of this data is an extremely difficult problem. Currently, commercial systems transmit data to the surface by producing pressure pulses within the portion of the drilling mud enclosed in the hollow steel drill string. Transmission rates are between two and four data bits per second. Any system capable of raising data rates without increasing the complexity of the drilling process will have significant economic impact. One alternative system is based upon acoustical carrier waves generated within the drill string itself. If developed, this method would accommodate data rates up to 100 bits per second. Unfortunately, the drill string is a periodic structure of pipe and threaded tool joints, the transmission characteristics are very complex and exhibit a banded and dispersive structure. Over the past forty years, attempts to field systems based upon this transmission method have resulted in little success. This paper examines this acoustical transmission problem in great detail. The basic principles of acoustic wave propagation in the periodic structure of the drill string are examined through theory, laboratory experiment, and field test. The results indicate the existence of frequency bands which are virtually free of attenuation and suitable for data transmission at high bit rates. 9 refs., 38 figs., 2 tabs.

Drumheller, D.S.

1988-08-01T23:59:59.000Z

308

Acoustically enhanced heat exchange and drying apparatus  

DOE Patents (OSTI)

A heat transfer drying apparatus includes an acoustically augmented heat transfer chamber for receiving material to be dried. The chamber includes a first heat transfer gas inlet, a second heat transfer gas inlet, a material inlet, and a gas outlet which also serves as a dried material and gas outlet. A non-pulsing first heat transfer gas source provides a first drying gas to the acoustically augmented heat transfer chamber through the first heat transfer gas inlet. A valveless, continuous second heat transfer gas source provides a second drying gas to the acoustically augmented heat transfer chamber through the second heat transfer gas inlet. The second drying gas also generates acoustic waves which bring about acoustical coupling with the gases in the acoustically augmented heat transfer chamber. The second drying gas itself oscillates at an acoustic frequency of approximately 180 Hz due to fluid mechanical motion in the gas. The oscillations of the second heat transfer gas coupled to the first heat transfer gas in the acoustically augmented heat transfer chamber enhance heat and mass transfer by convection within the chamber. 3 figs.

Bramlette, T.T.; Keller, J.O.

1987-07-10T23:59:59.000Z

309

Three-Dimensional Nonlinear Acoustical Holography  

E-Print Network (OSTI)

Nearfield Acoustical Holography (NAH) is an acoustic field visualization technique that can be used to reconstruct three-dimensional (3-D) acoustic fields by projecting two-dimensional (2-D) data measured on a hologram surface. However, linear NAH algorithms developed and improved by many researchers can result in significant reconstruction errors when they are applied to reconstruct 3-D acoustic fields that are radiated from a high-level noise source and include significant nonlinear components. Here, planar, nonlinear acoustical holography procedures are developed that can be used to reconstruct 3-D, nonlinear acoustic fields radiated from a high-level noise source based on 2-D acoustic pressure data measured on a hologram surface. The first nonlinear acoustic holography procedure is derived for reconstructing steady-state acoustic pressure fields by applying perturbation and renormalization methods to nonlinear, dissipative, pressure-based Westervelt Wave Equation (WWE). The nonlinear acoustic pressure fields radiated from a high-level pulsating sphere and an infinite-size, vibrating panel are used to validate this procedure. Although the WWE-based algorithm is successfully validated by those two numerical simulations, it still has several limitations: (1) Only the fundamental frequency and its second harmonic nonlinear components can be reconstructed; (2) the application of this algorithm is limited to mono-frequency source cases; (3) the effects of bent wave rays caused by transverse particle velocities are not included; (4) only acoustic pressure fields can be reconstructed. In order to address the limitations of the steady-state, WWE-based procedure, a transient, planar, nonlinear acoustic holography algorithm is developed that can be used to reconstruct 3-D nonlinear acoustic pressure and particle velocity fields. This procedure is based on Kuznetsov Wave Equation (KWE) that is directly solved by using temporal and spatial Fourier Transforms. When compared to the WWE-based procedure, the KWE-based procedure can be applied to multi-frequency source cases where each frequency component can contain both linear and nonlinear components. The effects of nonlinear bent wave rays can be also considered by using this algorithm. The KWE-based procedure is validated by conducting an experiment with a compression driver and four numerical simulations. The numerical and experimental results show that holographically-projected acoustic fields match well with directly-calculated and directly-measured fields.

Niu, Yaying

2013-05-01T23:59:59.000Z

310

Piezoelectric materials used in underwater acoustic transducers  

Science Conference Proceedings (OSTI)

Piezoelectric materials have been used in underwater acoustic transducers for nearly a century. In this paper, we reviewed four different types of piezoelectric materials: piezoelectric ceramics, single crystals, composites, and polymers, which are widely used in underwater acoustic transducers nowadays. Piezoelectric ceramics are the most dominant material type and are used as a single-phase material or one of the end members in composites. Piezoelectric single crystals offer outstanding electromechanical response but are limited by their manufacturing cost. Piezoelectric polymers provide excellent acoustic impedance matching and transducer fabrication flexibility although their piezoelectric properties are not as good as ceramics and single crystals. Composites combined the merits of ceramics and polymers and are receiving increased attention. The typical structure and electromechanical properties of each type of materials are introduced and discussed with respect to underwater acoustic transducer applications. Their advantages and disadvantages are summarized. Some of the critical design considerations when developing underwater acoustic transducers with these materials are also touched upon.

Li, Huidong; Deng, Zhiqun; Carlson, Thomas J.

2012-07-07T23:59:59.000Z

311

Gradually Truncated Log-normal distribution- Size distribution of firms  

E-Print Network (OSTI)

Many natural and economical phenomena are described through power law or log-normal distributions. In these cases, probability decreases very slowly with step size compared to normal distribution. Thus it is essential to cut-off these distributions for larger step size. Recently we introduce the gradually truncated power law distribution to successfully describe variation of financial, educational, physical and citation index. In the present work, we introduce gradually truncated log-normal distribution in which we gradually cut-off larger steps due to physical limitation of the system. We applied this distribution successfully to size distribution of USAs manufactoring firms which is measured through their annual sell. The physical limitation are due to limited market size or shortage of highly competent executives. I.

Hari M. Gupta; Jos R. Campanha

2008-01-01T23:59:59.000Z

312

Evaluation of a geothermal well logging, DST and Pit test  

DOE Green Energy (OSTI)

This paper briefly discusses logging and testing operations and certain related physical aspects in geothermal well evaluations. A good understanding of thermal and hydrological characteristics of geothermal reservoirs are essential in geothermal well evaluations. Within geothermal reservoirs, in evaluating the wells, the two most important parameters that first could be estimated, then measured or calculated, are temperature and productivity. Well logs and wireline surveys are means of measuring formation temperatures. Drill Stem Tests (DST's) or Pit Tests are means of determining formation productivity. Geochemistry and Petrology are currently accepted as two evaluation yardsticks in geothermal well evaluations. investigations of cuttings and cores during drilling operations, along with studies on formation waters could be used in a predictive nature for temperature and productivity and could yield useful information on the resource.

Tansev, Erdal O.

1978-01-01T23:59:59.000Z

313

Slimhole Drilling, Logging, and Completion Technology - An Update  

DOE Green Energy (OSTI)

Using slim holes (diameter < 15 cm) for geothermal exploration and small-scale power production can produce significant cost savings compared to conventional rotary-drilling methods. In addition, data obtained from slim holes can be used to lower the risks and costs associated with the drilling and completion of large-diameter geothermal wells. As a prime contractor to the U.S. Department of Energy (DOE), Sandia National Laboratories has worked with industry since 1992 to develop and promote drilling, testing, and logging technology for slim holes. This paper describes the current status of work done both in-house and contracted to industry. It focuses on drilling technology, case histories of slimhole drilling projects, data collection and rig instrumentation, and high-temperature logging tools.

FINGER,JOHN T.; JACOBSON,RONALD D.

1999-10-07T23:59:59.000Z

314

Development of geothermal logging systems in the United States  

DOE Green Energy (OSTI)

Logging technologies developed for hydrocarbon resource evaluation have not migrated into geothermal applications even though data so obtained would strengthen reservoir characterization efforts. Two causative issues have impeded progress: (1) there is a general lack of vetted, high-temperature instrumentation, and (2) the interpretation of log data generated in a geothermal formation is in its infancy. Memory-logging tools provide a path around the first obstacle by providing quality data at a low cost. These tools feature on-board computers that process and store data, and newer systems may be programmed to make decisions. Since memory tools are completely self-contained, they are readily deployed using the slick line found on most drilling locations. They have proven to be rugged, and a minimum training program is required for operator personnel. Present tools measure properties such as temperature and pressure, and the development of noise, deviation, and fluid conductivity logs based on existing hardware is relatively easy. A more complex geochemical tool aimed at a quantitative analysis of (potassium, uranium and thorium) is in the calibration phase, and it is expandable into all nuclear measurements common in the hydrocarbon industry. A fluid sampling tool is in the design phase. All tools are designed for operation at conditions exceeding 400 C, and for deployment in the slim holes produced by mining-coring operations. Partnerships are being formed between the geothermal industry and scientific drilling programs to define and develop inversion algorithms relating raw tool data to more pertinent information. These cooperative efforts depend upon quality guidelines such as those under development within the international Ocean Drilling Program.

Lysne, P.

1994-04-01T23:59:59.000Z

315

Resistivity Log At Fort Bliss Area (Combs, Et Al., 1999) | Open Energy  

Open Energy Info (EERE)

source source History View New Pages Recent Changes All Special Pages Semantic Search/Querying Get Involved Help Apps Datasets Community Login | Sign Up Search Page Edit History Facebook icon Twitter icon » Resistivity Log At Fort Bliss Area (Combs, Et Al., 1999) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Single-Well and Cross-Well Resistivity At Fort Bliss Area (Combs, Et Al., 1999) Exploration Activity Details Location Fort Bliss Area Exploration Technique Single-Well and Cross-Well Resistivity Activity Date Usefulness not indicated DOE-funding Unknown Notes Three principal types of data were obtained from this drilling project: core samples of the lithology penetrated by the holes, records of drilling behavior (such as water level in the hole, changes in rate of penetration

316

Resistivity Log At Valles Caldera - Sulphur Springs Area (Wilt & Haar,  

Open Energy Info (EERE)

source source History View New Pages Recent Changes All Special Pages Semantic Search/Querying Get Involved Help Apps Datasets Community Login | Sign Up Search Page Edit History Facebook icon Twitter icon » Resistivity Log At Valles Caldera - Sulphur Springs Area (Wilt & Haar, 1986) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Single-Well and Cross-Well Resistivity At Valles Caldera - Sulphur Springs Area (Wilt & Haar, 1986) Exploration Activity Details Location Valles Caldera - Sulphur Springs Area Exploration Technique Single-Well and Cross-Well Resistivity Activity Date Usefulness useful DOE-funding Unknown Notes The generalized resistivity tog (Fig. 8) indicates a multilayer section with considerable resistivity contrast between the layers. The near-surface

317

Electric Micro Imager Log At Coso Geothermal Area (2003) | Open Energy  

Open Energy Info (EERE)

source source History View New Pages Recent Changes All Special Pages Semantic Search/Querying Get Involved Help Apps Datasets Community Login | Sign Up Search Page Edit History Facebook icon Twitter icon » Electric Micro Imager Log At Coso Geothermal Area (2003) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Single-Well and Cross-Well Resistivity At Coso Geothermal Area (2003) Exploration Activity Details Location Coso Geothermal Area Exploration Technique Single-Well and Cross-Well Resistivity Activity Date 2003 Usefulness not indicated DOE-funding Unknown Exploration Basis Fracture/stress analysis Notes A preliminary fracture/stress analysis was conducted for the recently drilled well 38C-9 as part of a continuing effort to characterize the

318

Characterizing Application Runtime Behavior from System Logs and Metrics  

Science Conference Proceedings (OSTI)

Large-scale systems are heavily shared resource environments where a mix of applications are launched concurrently competing for network and storage resources. It is essential to characterize the runtime behavior of these applications for provisioning system resources and understanding the impact of application s performance when competing for resources. In this paper, we study the use of zero- and low-overhead system logs and other system metric data for characterizing the runtime behavior of several applications. We present our preliminary work on estimating individual application s I/O demands by observing file system usage pattern over multiple runs, and interpreting application s network utilization characteristics by observing link-layer error logs. We also present preliminary findings on using such information in making context-sensitive scheduling decisions that minimize potentially negative interactions between applications competing for shared resources. Our analysis is based on four months of system log data collected on one of the world s largest supercomputing facilities, the Jaguar XT5 petaflop system at Oak Ridge National Laboratory.

Gunasekaran, Raghul [ORNL; Dillow, David A [ORNL; Shipman, Galen M [ORNL; Vuduc, Richard [Georgia Institute of Technology; Chow, Edmond [Georgia Institute of Technology

2011-01-01T23:59:59.000Z

319

Sparse Multichannel Estimation Algorithm for Cooperative Underwater Acoustic Communication Networks  

E-Print Network (OSTI)

Introduction: Cooperative Underwater Acoustic Communicationsgain for wireless and underwater network in interference-

Richard, Nick; Mitra, Urbasi

2007-01-01T23:59:59.000Z

320

V-068: Citrix CloudPlatform Logs Potentially Sensitive Information in the  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

8: Citrix CloudPlatform Logs Potentially Sensitive Information 8: Citrix CloudPlatform Logs Potentially Sensitive Information in the Log File V-068: Citrix CloudPlatform Logs Potentially Sensitive Information in the Log File January 14, 2013 - 12:15am Addthis PROBLEM: Citrix CloudPlatform Logs Potentially Sensitive Information in the Log File PLATFORM: Citrix CloudStack and CloudPlatform up to and including 3.0.5. ABSTRACT: A vulnerability was reported in Citrix CloudPlatform. REFERENCE LINKS: Document ID: CTX136163 SecurityTracker Alert ID: 1027978 CVE-2012-5616 IMPACT ASSESSMENT: Medium DISCUSSION: A vulnerability has been identified in Citrix CloudPlatform, formerly known as Citrix CloudStack, that could result in security-sensitive information being logged during the normal operation of the CloudPlatform server. IMPACT:

Note: This page contains sample records for the topic "activity acoustic logs" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

A Model for Water Factor Measurements With Fission-Neutron Logging...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

A Model for Water Factor Measurements With Fission-Neutron Logging Tools (May 1983) A Model for Water Factor Measurements With Fission-Neutron Logging Tools (May 1983) A Model for...

322

Surface Soil Changes Following Selective Logging in an Eastern Amazon Forest  

Science Conference Proceedings (OSTI)

In the Brazilian Amazon, selective logging is second only to forest conversion in its extent. Conversion to pasture or agriculture tends to reduce soil nutrients and site productivity over time unless fertilizers are added. Logging removes ...

Lydia P. Olander; Mercedes M. Bustamante; Gregory P. Asner; Everaldo Telles; Zayra Prado; Plnio B. Camargo

2005-04-01T23:59:59.000Z

323

Particle collection enhancement by acoustics  

SciTech Connect

The overall objective of this project is to demonstrate pulse combustion induced acoustic enhancement of coal ash agglomeration and sulfur capture efficiency at conditions typical of proposed direct coal-fired turbines. The MTCI proprietary approach results in agglomerates that allow the use of conventional cyclones to achieve very high particulate collection efficiency and eliminates the need for barrier filters which pose concerns regarding durability and economics. The goal of the program is to support the mission of the Department of Energy (DOE) for developing coal-fired combustion gas turbines. The MTCI concept can be packaged either as a hot flue gas clean-up subsystem for the existing combustor island configurations or as an alterative primary pulse combustor island with integrated sulfur capture, particulate agglomeration and capture, alkali gettering and NO{sub x} emissions control.

Mansour, M.N.; Chandran, R.R.; Duqum, J.N. [Manufacturing and Technology Conversion International, Inc., Columbia, MD (United States); Scaroni, A.W.; Koopman, G.H. [Pennsylvania State Univ., University Park, PA (United States); Loth, J.L. [West Virginia Univ., Morgantown, WV (United States)

1993-09-01T23:59:59.000Z

324

Characterization of acoustic signals due to surface discharges on H.V. glass insulators using wavelet radial basis function neural networks  

Science Conference Proceedings (OSTI)

A hybrid model incorporating wavelet and radial basis function neural network is presented which is used to detect, identify and characterize the acoustic signals due to surface discharge activity and hence differentiate abnormal operating conditions ... Keywords: Acoustic signal, Dry bands, Glass insulator, RBF-NN, Surface discharge, Wavelet transform

Nasir A. Al-geelani; M. Afendi M. Piah; Redhwan Q. Shaddad

2012-04-01T23:59:59.000Z

325

Acoustically enhanced heat exchange and drying apparatus  

DOE Patents (OSTI)

A heat transfer apparatus includes a first chamber having a first heat transfer gas inlet, a second heat transfer gas inlet, and an outlet. A first heat transfer gas source provides a first gas flow to the first chamber through the first heat transfer gas inlet. A second gas flow through a second chamber connected to the side of the first chamber, generates acoustic waves which bring about acoustical coupling of the first and second gases in the acoustically augmented first chamber. The first chamber may also include a material inlet for receiving material to be dried, in which case the gas outlet serves as a dried material and gas outlet.

Bramlette, T. Tazwell (Livermore, CA); Keller, Jay O. (Oakland, CA)

1989-01-01T23:59:59.000Z

326

Copper vapor laser acoustic thermometry system  

DOE Patents (OSTI)

A copper vapor laser (CVL) acoustic thermometry system is disclosed. The invention couples an acoustic pulse a predetermined distance into a laser tube by means of a transducer and an alumina rod such that an echo pulse is returned along the alumina rod to the point of entry. The time differential between the point of entry of the acoustic pulse into the laser tube and the exit of the echo pulse is related to the temperature at the predetermined distance within the laser tube. This information is processed and can provide an accurate indication of the average temperature within the laser tube.

Galkowski, J.J.

1986-08-27T23:59:59.000Z

327

Speaker verification system using acoustic data and non-acoustic data  

DOE Patents (OSTI)

A method and system for speech characterization. One embodiment includes a method for speaker verification which includes collecting data from a speaker, wherein the data comprises acoustic data and non-acoustic data. The data is used to generate a template that includes a first set of "template" parameters. The method further includes receiving a real-time identity claim from a claimant, and using acoustic data and non-acoustic data from the identity claim to generate a second set of parameters. The method further includes comparing the first set of parameters to the set of parameters to determine whether the claimant is the speaker. The first set of parameters and the second set of parameters include at least one purely non-acoustic parameter, including a non-acoustic glottal shape parameter derived from averaging multiple glottal cycle waveforms.

Gable, Todd J. (Walnut Creek, CA); Ng, Lawrence C. (Danville, CA); Holzrichter, John F. (Berkeley, CA); Burnett, Greg C. (Livermore, CA)

2006-03-21T23:59:59.000Z

328

Hourly analysis of a very large topically categorized web query log  

Science Conference Proceedings (OSTI)

We review a query log of hundreds of millions of queries that constitute the total query traffic for an entire week of a general-purpose commercial web search service. Previously, query logs have been studied from a single, cumulative view. In contrast, ... Keywords: query log analysis, web search

Steven M. Beitzel; Eric C. Jensen; Abdur Chowdhury; David Grossman; Ophir Frieder

2004-07-01T23:59:59.000Z

329

An Overview of Logging Safety Programs in the USA. Working Paper #43  

E-Print Network (OSTI)

An Overview of Logging Safety Programs in the USA. Working Paper #43 Louisiana Forest Products;1 An Overview of Logging Safety Programs in the USA. a paper presented by Cornelis F. de Hoop Associate throughout the USA to reduce logging accidents and assist loggers with safety programs. Driven by accident

330

User logs as a means to enrich and refine translation dictionaries  

Science Conference Proceedings (OSTI)

This paper presents the participation of the CACAO prototype to the Log Analysis for Digital Societies (LADS) task of LogCLEF 2009 track. In our experiment we investigated the possibility to exploit the TEL logs data as a source for inferring new translations, ...

Alessio Bosca; Luca Dini

2009-09-01T23:59:59.000Z

331

Application of Self-Organizing Competitive Network in Lithologic Identification of the Logging Data  

Science Conference Proceedings (OSTI)

The geological information of logging data is very important for people to determine oil reserves and make the plan of exploitation. So it is essential to identify litho logy of the logging data. Neural network with self-organizing, self-learning and ... Keywords: self-organizing, competitive network, log data to identify lithology, MATLAB

Ren Guo-Feng; Tian Zhu-Mei

2012-07-01T23:59:59.000Z

332

Acoustic wave propagation in a fluid-filled borehole surrounded by a formation with stress-relief-induced anisotropy  

SciTech Connect

The stress relief associated with the drilling of a borehole may lead to an anisotropic formation in the vicinity of the borehole, where the properties in the radial direction differ from those in the axial and tangential directions. Thus, axial and radial compressional acoustic velocities are different, and similarly, the velocity of an axial shear-wave depends on whether the polarization is radial or tangential. A model was developed to describe acoustic wave propagation in a borehole surrounded by a formation with stress-relief-induced radial transverse isotropy (RTI). Acoustic full waveforms due to a monopole source are computed using the real-axis integration method, and dispersion relations are found by tracing poles in the k[sub z] plane. An analytic expression for the low-frequency Stoneley wave is developed. The numerical results confirm the expectations that the compressional refraction is mainly given by the axial compressional velocity, while the shear refraction arrival is due to the shear wave with radial polarization. As a result, acoustic logging in an RTI formation, will indicate a higher v[sub p]/v[sub s] ratio than that existing in the virgin formation. It also follows that the shear velocity may be a better indicator of a mechanically damaged zone near the borehole than the compressional velocity. The Stoneley-wave velocity was found to decrease with the increasing degree of RTI.

Renlie, L. (IKU Petroleum Research, Trondheim (Norway)); Raaen, A.M. (Statoil, Postuttak, Trondheim (Norway))

1993-09-01T23:59:59.000Z

333

ACOUSTICAL IMAGING AND MECHANICAL PROPERTIES OF SOFT ROCK AND MARINE SEDIMENTS  

SciTech Connect

The research during this project has concentrated on developing a correlation between rock deformation mechanisms and their acoustic velocity signature. This has included investigating: (1) the acoustic signature of drained and undrained unconsolidated sands, (2) the acoustic emission signature of deforming high porosity rocks (in comparison to their low porosity high strength counterparts), (3) the effects of deformation on anisotropic elastic and poroelastic moduli, and (4) the acoustic tomographic imaging of damage development in rocks. Each of these four areas involve triaxial experimental testing of weak porous rocks or unconsolidated sand and involves measuring acoustic properties. The research is directed at determining the seismic velocity signature of damaged rocks so that 3-D or 4-D seismic imaging can be utilized to image rock damage. These four areas of study are described in the report: (1) Triaxial compression experiments have been conducted on unconsolidated Oil Creek sand at high confining pressures. (2) Initial experiments on measuring the acoustic emission activity from deforming high porosity Danian chalk were accomplished and these indicate that the AE activity was of a very low amplitude. (3) A series of triaxial compression experiments were conducted to investigate the effects of induced stress on the anisotropy developed in dynamic elastic and poroelastic parameters in rocks. (4) Tomographic acoustic imaging was utilized to image the internal damage in a deforming porous limestone sample. Results indicate that the deformation damage in rocks induced during laboratory experimentation can be imaged tomographically in the laboratory. By extension the results also indicate that 4-D seismic imaging of a reservoir may become a powerful tool for imaging reservoir deformation (including imaging compaction and subsidence) and for imaging zones where drilling operation may encounter hazardous shallow water flows.

Thurman E. Scott, Jr.; Younane Abousleiman

2004-04-01T23:59:59.000Z

334

Audioptimization : global-based acoustic design  

E-Print Network (OSTI)

Acoustic design is a difficult problem, because the human perception of sound depends on such things as decibel level, direction of propagation, and attenuation over time, none of which are tangible or visible. The advent ...

Monks, Michael Christopher, 1958-

1999-01-01T23:59:59.000Z

335

An Acoustic Doppler and Electromagnetic Velocity Profiler  

Science Conference Proceedings (OSTI)

A freely failing current meter called the Absolute Velocity Profiler (AVP) is described. This profiler is an expansion of a previously developed instrument, the Electro-Magnetic Velocity Profiler (EMVP), with the additional capability of acoustic ...

Thomas B. Sanford; Robert G. Driver; John H. Dunlap

1985-06-01T23:59:59.000Z

336

Errors in Radio Acoustic Sounding of Temperature  

Science Conference Proceedings (OSTI)

With the use of simultaneous correction for radial wind, the accuracy of radio acoustic sounding systems for the measurement of temperature has been substantially improved. The temperature accuracy can now be affected by a number of factors that ...

Wayne M. Angevine; W. L. Ecklund

1994-06-01T23:59:59.000Z

337

Scattering of ion-acoustic solitons  

SciTech Connect

A series of experiments is described that is designed to ascertain the properties of the scattering of planar ion-acoustic solitons from objects of various shapes. The scattered solitons are compared with those radiated from the same objects.

Raychaudhuri, S.; Chang, H.; Tsikis, E.K.; Lonngren, K.E.

1985-07-01T23:59:59.000Z

338

Global Ocean Warming: An Acoustic Measure?  

Science Conference Proceedings (OSTI)

Explosions of 300 lbs of TNT at 1 km depth off Perth, Australia were recorded on Bermuda hydrophones, demonstrating 30 years age the feasibility of global acoustic transmissions. Climate-induced changes in ocean temperature (and hence in sound ...

W. H. Munk; A. M. G. Forbes

1989-11-01T23:59:59.000Z

339

Underwater acoustic MIMO OFDM: an experimental analysis  

E-Print Network (OSTI)

Performance of multiple-input multiple-output (MIMO) orthogonal frequency division multiplexing (OFDM) is analyzed on an experimental shallow water acoustic channel. Different modulation levels, numbers of subcarriers and ...

Palou Visa, Guillem

340

Weather Classification Using Passive Acoustic Drifters  

Science Conference Proceedings (OSTI)

Weather observations are needed in remote oceanic regions to support numerical weather forecast models, to provide surface truth for satellite sensors, and to help understand global weather patterns. An acoustic mini-drifting buoy using no moving ...

Jeffrey A. Nystuen; Harry D. Selsor

1997-06-01T23:59:59.000Z

Note: This page contains sample records for the topic "activity acoustic logs" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Building Energy Software Tools Directory: Acoustics Program  

NLE Websites -- All DOE Office Websites (Extended Search)

Acoustics Program Acoustics Program Developed to help designers accurately model the sound level reaching building tenant's ears, the Trane Acoustics Program (TAP) "projects" equipment sound power data through the surroundings (e.g., floors, ductwork, walls), to estimate the sound level that will be heard. Industry-standard calculations published by ASHRAE's 1991 Algorithms for HVAC Acoustics handbook are the basis for this estimate. In TAP, you can model the conditions of an HVAC system by choosing specific equipment and building component criteria. TAP will analyze the sound path and calculate the total effect for the enclosed space. You can continuously adjust the data and system design criteria to compare the results effortlessly. TAP will even plot presentation quality graphs of

342

Logging technology for high-temperature geothermal boreholes  

DOE Green Energy (OSTI)

Research in materials, equipment, and instrument development was required in the Hot Dry Rock Energy Extraction Demonstration at Fenton Hill located in northern New Mexico. Results of this extensive development advanced the logging technology in geothermal boreholes to present state-of-the art. The new Phase II Energy Extraction System at the Fenton Hill Test Site will consist of two wellbores drilled to a depth of about 4570 m (15,000 ft) and then connected by a series of hydraulic-induced fractures. The first borehole (EE-2) was completed in May of 1980 at a depth of 4633 m (15,200 ft) of which approximately 3960 m (13,000 ft) is in Precambrian granitic rock. Starting at a depth of approximately 2930 m (9600 ft), the borehole was inclined up to 35/sup 0/ from vertical. Bottom-hole temperature in EE-2 is 320/sup 0/C. The EE-3 borehole was then drilled to a depth of 4236 m (13,900 ft). Its inclined part is positioned directly over the EE-2 wellbore with a vertical separation of about 450 m (1500 ft) between them. Many of the geophysical measurements needed to develop the hot dry rock concept are unique. Most of the routine instruments used in petroleum drilling fail in the hot and abrasive environment. New equipment developed includes not only the downhole sonde that houses the transducer and associated line driving electronics, but modifications also were needed on the entire data retrieval systems and associated data analysis technology. Successful performance of wellbore surveys in the EE-2 and EE-3 boreholes depended upon the capacity of the sensors, instrument sonde, cablehead, and armored logging cable to work in this severe environment. The major areas of materials development for surveying the boreholes in the high-temperature environment were on elastomeric seals, electrical insulation for logging cables, downhole sensors, and associated downhole electronic and electro-mechanical components.

Dennis, B.R.

1984-05-01T23:59:59.000Z

343

Universality for random matrices and log-gases  

E-Print Network (OSTI)

Eugene Wigner's revolutionary vision predicted that the energy levels of large complex quantum systems exhibit a universal behavior: the statistics of energy gaps depend only on the basic symmetry type of the model. Simplified models of Wigner's thesis have recently become mathematically accessible. For mean field models represented by large random matrices with independent entries, the celebrated Wigner-Dyson-Gaudin-Mehta (WDGM) conjecture asserts that the local eigenvalue statistics are universal. For invariant matrix models, the eigenvalue distributions are given by a log-gas with potential $V$ and inverse temperature $\\beta = 1, 2, 4$. corresponding to the orthogonal, unitary and symplectic ensembles. For $\\beta \

Laszlo Erdos

2012-12-04T23:59:59.000Z

344

Acoustic Energy Storage in Single Bubble Sonoluminescence  

E-Print Network (OSTI)

Single bubble sonoluminescence is understood in terms of a shock focusing towards the bubble center. We present a mechanism for significantly enhancing the effect of shock focusing, arising from the storage of energy in the acoustic modes of the gas. The modes with strongest coupling are not spherically symmetric. The storage of acoustic energy gives a framework for understanding how light intensities depend so strongly on ambient gases and liquids and suggests that the light intensities of successive flashes are highly correlated.

Michael P. Brenner; Sascha Hilgenfeldt; Detlef Lohse; Rodolfo R. Rosales

1996-05-07T23:59:59.000Z

345

Tunable damper for an acoustic wave guide  

DOE Patents (OSTI)

A damper for tunably damping acoustic waves in an ultrasonic waveguide is provided which may be used in a hostile environment such as a nuclear reactor. The area of the waveguide, which may be a selected size metal rod in which acoustic waves are to be damped, is wrapped, or surrounded, by a mass of stainless steel wool. The wool wrapped portion is then sandwiched between tuning plates, which may also be stainless steel, by means of clamping screws which may be adjusted to change the clamping force of the sandwiched assembly along the waveguide section. The plates are preformed along their length in a sinusoidally bent pattern with a period approximately equal to the acoustic wavelength which is to be damped. The bent pattern of the opposing plates are in phase along their length relative to their sinusoidal patterns so that as the clamping screws are tightened a bending stress is applied to the waveguide at 180/sup 0/ intervals along the damping section to oppose the acoustic wave motions in the waveguide and provide good coupling of the wool to the guide. The damper is tuned by selectively tightening the clamping screws while monitoring the amplitude of the acoustic waves launched in the waveguide. It may be selectively tuned to damp particular acoustic wave modes (torsional or extensional, for example) and/or frequencies while allowing others to pass unattenuated.

Rogers, S.C.

1982-10-21T23:59:59.000Z

346

Tunable damper for an acoustic wave guide  

DOE Patents (OSTI)

A damper for tunably damping acoustic waves in an ultrasonic waveguide is provided which may be used in a hostile environment such as a nuclear reactor. The area of the waveguide, which may be a selected size metal rod in which acoustic waves are to be damped, is wrapped, or surrounded, by a mass of stainless steel wool. The wool wrapped portion is then sandwiched between tuning plates, which may also be stainless steel, by means of clamping screws which may be adjusted to change the clamping force of the sandwiched assembly along the waveguide section. The plates are preformed along their length in a sinusoidally bent pattern with a period approximately equal to the acoustic wavelength which is to be damped. The bent pattern of the opposing plates are in phase along their length relative to their sinusoidal patterns so that as the clamping screws are tightened a bending stress is applied to the waveguide at 180.degree. intervals along the damping section to oppose the acoustic wave motions in the waveguide and provide good coupling of the wool to the guide. The damper is tuned by selectively tightening the clamping screws while monitoring the amplitude of the acoustic waves launched in the waveguide. It may be selectively tuned to damp particular acoustic wave modes (torsional or extensional, for example) and/or frequencies while allowing others to pass unattenuated.

Rogers, Samuel C. (Knoxville, TN)

1984-01-01T23:59:59.000Z

347

Direct observation of dynamic surface acoustic wave controlled carrier injection into single quantum posts using phase-resolved optical spectroscopy  

E-Print Network (OSTI)

A versatile stroboscopic technique based on active phase-locking of a surface acoustic wave to picosecond laser pulses is used to monitor dynamic acoustoelectric effects. Time-integrated multi-channel detection is applied to probe the modulation of the emission of a quantum well for different frequencies of the surface acoustic wave. For quantum posts we resolve dynamically controlled generation of neutral and charged excitons and preferential injection of holes into localized states within the nanostructure.

Vlk, S; Schlein, F J R; Truong, T A; Kim, H; Petroff, P M; Wixforth, A; Krenner, H J

2010-01-01T23:59:59.000Z

348

Direct observation of dynamic surface acoustic wave controlled carrier injection into single quantum posts using phase-resolved optical spectroscopy  

E-Print Network (OSTI)

A versatile stroboscopic technique based on active phase-locking of a surface acoustic wave to picosecond laser pulses is used to monitor dynamic acoustoelectric effects. Time-integrated multi-channel detection is applied to probe the modulation of the emission of a quantum well for different frequencies of the surface acoustic wave. For quantum posts we resolve dynamically controlled generation of neutral and charged excitons and preferential injection of holes into localized states within the nanostructure.

S. Vlk; F. Knall; F. J. R. Schlein; T. A. Truong; H. Kim; P. M. Petroff; A. Wixforth; H. J. Krenner

2010-11-08T23:59:59.000Z

349

Comparative Performance of Acoustic-tagged and PIT-tagged Juvenile Salmonids  

Science Conference Proceedings (OSTI)

Numerous research tools and technologies are currently being used to evaluate fish passage and survival to determine the impacts of the Federal Columbia River Power System (FCRPS) on endangered and threatened juvenile salmonids, including PIT tags, balloon tags, hydroacoustic evaluations, radio telemetry, and acoustic telemetry. Each has advantages and disadvantages, but options are restricted in some situations because of limited capabilities of a specific technology, lack of detection capability downstream, or availability of adequate numbers of fish. However, there remains concern about the comparative effects of the tag or the tagging procedure on fish performance. The recently developed Juvenile Salmonid Acoustic Telemetry System (JSATS) acoustic transmitter is the smallest active acoustic tag currently available. The goal of this study was to determine whether fish tagged with the JSATS acoustic-telemetry tag can provide unbiased estimates of passage behavior and survival within the performance life of the tag. We conducted both field and laboratory studies to assess tag effects. For the field evaluation we released a total of 996 acoustic-tagged fish in conjunction with 21,026 PIT-tagged fish into the tailrace of Lower Granite Dam on 6 and 13 May. Travel times between release and downstream dams were not significantly different for the majority of the reaches between acoustic-tagged and PIT-tagged fish. In addition to the field evaluation, a series of laboratory experiments were conducted to determine if growth and survival of juvenile Chinook salmon surgically implanted with acoustic transmitters is different than untagged or PIT tagged juvenile Chinook salmon. Only yearling fish with integrated and non-integrated transmitters experienced mortalities, and these were low (tag treatments ranged up to 7.7% while integrated and non-integrated treatments had slightly higher rates (up to 8.3% and 7.9% respectively). No acoustic transmitters were shed by yearling fish during the course of the 90 day study. Up to 7.8% of subyearling fish expelled transmitters. Tags were expelled from 5 to 63 days post-surgery. The average time to expulsion was 27 days; few fish expelled transmitters within 14 days of implantation or less. Histological results suggest that inflammation associated with implantation of an acoustic transmitter can produce fibrous tissue which can invade and possibly damage internal organs soon after implantation. Reactions severe enough to damage organs however, were limited to only ~20% of subyearling Chinook salmon, all of which were under 101mm and 12g at tagging. The infiltration of the fibrous tissue into organs was observed most often in fish held for 21 days and appeared to decrease in subsequent holding times.

Hockersmith, Eric E.; Brown, Richard S.; Liedtke, Theresa L.

2008-02-01T23:59:59.000Z

350

Comparative Performance of Acoustic-tagged and PIT-tagged Juvenile Salmonids  

DOE Green Energy (OSTI)

Numerous research tools and technologies are currently being used to evaluate fish passage and survival to determine the impacts of the Federal Columbia River Power System (FCRPS) on endangered and threatened juvenile salmonids, including PIT tags, balloon tags, hydroacoustic evaluations, radio telemetry, and acoustic telemetry. Each has advantages and disadvantages, but options are restricted in some situations because of limited capabilities of a specific technology, lack of detection capability downstream, or availability of adequate numbers of fish. However, there remains concern about the comparative effects of the tag or the tagging procedure on fish performance. The recently developed Juvenile Salmonid Acoustic Telemetry System (JSATS) acoustic transmitter is the smallest active acoustic tag currently available. The goal of this study was to determine whether fish tagged with the JSATS acoustic-telemetry tag can provide unbiased estimates of passage behavior and survival within the performance life of the tag. We conducted both field and laboratory studies to assess tag effects. For the field evaluation we released a total of 996 acoustic-tagged fish in conjunction with 21,026 PIT-tagged fish into the tailrace of Lower Granite Dam on 6 and 13 May. Travel times between release and downstream dams were not significantly different for the majority of the reaches between acoustic-tagged and PIT-tagged fish. In addition to the field evaluation, a series of laboratory experiments were conducted to determine if growth and survival of juvenile Chinook salmon surgically implanted with acoustic transmitters is different than untagged or PIT tagged juvenile Chinook salmon. Only yearling fish with integrated and non-integrated transmitters experienced mortalities, and these were low (<4.5%). Mortality among sub-yearling control and PIT-tag treatments ranged up to 7.7% while integrated and non-integrated treatments had slightly higher rates (up to 8.3% and 7.9% respectively). No acoustic transmitters were shed by yearling fish during the course of the 90 day study. Up to 7.8% of subyearling fish expelled transmitters. Tags were expelled from 5 to 63 days post-surgery. The average time to expulsion was 27 days; few fish expelled transmitters within 14 days of implantation or less. Histological results suggest that inflammation associated with implantation of an acoustic transmitter can produce fibrous tissue which can invade and possibly damage internal organs soon after implantation. Reactions severe enough to damage organs however, were limited to only ~20% of subyearling Chinook salmon, all of which were under 101mm and 12g at tagging. The infiltration of the fibrous tissue into organs was observed most often in fish held for 21 days and appeared to decrease in subsequent holding times.

Hockersmith, Eric E.; Brown, Richard S.; Liedtke, Theresa L.

2008-02-01T23:59:59.000Z

351

Appendix A Lithologic and Monitor Well Completion Logs  

Office of Legacy Management (LM)

A A Lithologic and Monitor Well Completion Logs This page intentionally left blank WELL INSTALLATION BLANK CASING: 1.25 in. Stainless Steel 0.0 to 0.35 METHOD WELL SCREEN: 1.25 in. Stainless Steel 0.35 to 3.27 DATE DEVELOPED SUMPIEND CAP: 1.25 in. Stainless Steel 3.27 to 3.58 WATER LEVEL (FT BGS) SURFACE SEAL: LOGGED BY P. McKenzie REMARKS Drillers hit water at 5 fl: well point removed. LITHOLOGIC DESCRIPTION LOCATION SHIPROCK, NM SURFACE ELEV. ( FT NGVD) 4890.00 SITE SHIPROCK TOP OF CASING (FT) 4890.00 WELL NUMBER 0602 MEAS. PT. ELEV. (FT) 4890.00 SLOT SIZE (IN) 0.125 WELL INSTALLATION INTERVAL (FT) DRILLING METHOD BLANK CASING: 1.25 in. Stainless Steel 0.0 to 0.35 METHOD WELL SCREEN: 1.25 in. Stainless Steel 0.35 to 3.27 DATE DEVELOPED SUMPIEND CAP: 1.25 in. Stainless Steel 3.27 to 3.58

352

Regional well-log correlation in the New Mexico portion of the Delaware Basin  

SciTech Connect

Although well logs provide the most complete record of stratigraphy and structure in the northern Delaware Basin, regional interpretations of these logs generate problems of ambiguous lithologic signatures and on-hole anomalies. Interpretation must therefore be based on log-to-log correlation rather than on inferences from single logs. In this report, logs from 276 wells were used to make stratigraphic picks of Ochoan horizons (the Rustler, Salado, and Castile Formations) in the New Mexico portion of the Delaware Basin. Current log correlation suggests that: (1) the Castile is characterized by lateral thickening and thinning; (2) some Castile thinnings are of Permian age; (3) irregular topography in the Guadalupian Bell Canyon Formation may produce apparent structures in the overlying Ochoan units; and (4) extensive dissolution of the Salado is not apparent in the area of the Waste Isolation Pilot Project (WIPP) site. 13 refs., 37 figs.

Borns, D.J.; Shaffer, S.E.

1985-09-01T23:59:59.000Z

353

Apparatus for separating particles utilizing engineered acoustic contrast capture particles  

DOE Patents (OSTI)

An apparatus for separating particles from a medium includes a capillary defining a flow path therein that is in fluid communication with a medium source. The medium source includes engineered acoustic contrast capture particle having a predetermined acoustic contrast. The apparatus includes a vibration generator that is operable to produce at least one acoustic field within the flow path. The acoustic field produces a force potential minima for positive acoustic contrast particles and a force potential minima for negative acoustic contrast particles in the flow path and drives the engineered acoustic contrast capture particles to either the force potential minima for positive acoustic contrast particles or the force potential minima for negative acoustic contrast particles.

Kaduchak, Gregory (Los Alamos, NM); Ward, Michael D. (Los Alamos, NM)

2011-12-27T23:59:59.000Z

354

Proceedings of the 11th European Conference on Underwater Acoustics ACHIEVABLE RATES OF UNDERWATER ACOUSTIC OFDM  

E-Print Network (OSTI)

Proceedings of the 11th European Conference on Underwater Acoustics ACHIEVABLE RATES OF UNDERWATER-Telecom, Telecom Bretagne, UMR CNRS 6285 Lab-STICC, Ueb, Brest, France J.-M. Passerieux Thales Underwater Systems maintaining acceptable data rates, remains one of the major difficulty faced by underwater acoustic

Paris-Sud XI, Université de

355

Imaging of Acoustic Waves in Sand  

SciTech Connect

There is considerable interest in detecting objects such as landmines shallowly buried in loose earth or sand. Various techniques involving microwave, acoustic, thermal and magnetic sensors have been used to detect such objects. Acoustic and microwave sensors have shown promise, especially if used together. In most cases, the sensor package is scanned over an area to eventually build up an image or map of anomalies. We are proposing an alternate, acoustic method that directly provides an image of acoustic waves in sand or soil, and their interaction with buried objects. The INEEL Laser Ultrasonic Camera utilizes dynamic holography within photorefractive recording materials. This permits one to image and demodulate acoustic waves on surfaces in real time, without scanning. A video image is produced where intensity is directly and linearly proportional to surface motion. Both specular and diffusely reflecting surfaces can be accomodated and surface motion as small as 0.1 nm can be quantitatively detected. This system was used to directly image acoustic surface waves in sand as well as in solid objects. Waves as frequencies of 16 kHz were generated using modified acoustic speakers. These waves were directed through sand toward partially buried objects. The sand container was not on a vibration isolation table, but sat on the lab floor. Interaction of wavefronts with buried objects showed reflection, diffraction and interference effects that could provide clues to location and characteristics of buried objects. Although results are preliminary, success in this effort suggests that this method could be applied to detection of buried landmines or other near-surface items such as pipes and tanks.

Deason, Vance Albert; Telschow, Kenneth Louis; Watson, Scott Marshall

2003-08-01T23:59:59.000Z

356

Detecting coughing episodes passively from acoustic signals in a home environment: demo abstract  

Science Conference Proceedings (OSTI)

We demonstrate a passive cough monitoring system for in-home environments using acoustic sensors. Our system does not need the users to wear any device. It also works under the presence of typical sounds that may be common in a home environment. Keywords: activity monitoring, assisted living

Enamul Hoque; John A. Stankovic

2010-10-01T23:59:59.000Z

357

Method and apparatus of spectro-acoustically enhanced ultrasonic detection for diagnostics  

SciTech Connect

An apparatus for detecting a discontinuity in a material includes a source of electromagnetic radiation has a wavelength and an intensity sufficient to induce an enhancement in contrast between a manifestation of an acoustic property in the material and of the acoustic property in the discontinuity, as compared to when the material is not irradiated by the electromagnetic radiation. An acoustic emitter directs acoustic waves to the discontinuity in the material. The acoustic waves have a sensitivity to the acoustic property. An acoustic receiver receives the acoustic waves generated by the acoustic emitter after the acoustic waves have interacted with the material and the discontinuity. The acoustic receiver also generates a signal representative of the acoustic waves received by the acoustic receiver. A processor, in communication with the acoustic receiver and responsive to the signal generated by the acoustic receiver, is programmed to generate informational output about the discontinuity based on the signal generated by the acoustic receiver.

Vo-Dinh, Tuan (Knoxville, TN); Norton, Stephen J. (Raleigh, NC)

2001-01-01T23:59:59.000Z

358

Application of oil-field well log interpretation techniques to the Cerro Prieto Geothermal Field  

DOE Green Energy (OSTI)

An example is presented of the application of oil-field techniques to the Cerro Prieto Field, Mexico. The lithology in this field (sand-shale lithology) is relatively similar to oil-field systems. The study was undertaken as a part of the first series of case studies supported by the Geothermal Log Interpretation Program (GLIP) of the US Department of Energy. The suites of logs for individual wells were far from complete. This was partly because of adverse borehole conditions but mostly because of unavailability of high-temperature tools. The most complete set of logs was a combination of Dual Induction Laterolog, Compensated Formation Density Gamma Ray, Compensated Neutron Log, and Saraband. Temperature data about the wells were sketchy, and the logs had been run under pre-cooled mud condition. A system of interpretation consisting of a combination of graphic and numerical studies was used to study the logs. From graphical studies, evidence of hydrothermal alteration may be established from the trend analysis of SP (self potential) and ILD (deep induction log). Furthermore, the cross plot techniques using data from density and neutron logs may help in establishing compaction as well as rock density profile with depth. In the numerical method, R/sub wa/ values from three different resistivity logs were computed and brought into agreement. From this approach, values of formation temperature and mud filtrate resistivity effective at the time of logging were established.

Ershaghi, I.; Phillips, L.B.; Dougherty, E.L.; Handy, L.L.

1979-10-01T23:59:59.000Z

359

Surface acoustic wave controlled carrier injection into self-assembled quantum dots and quantum posts  

E-Print Network (OSTI)

We report on recent progress in the acousto-electrical control of self-assembled quantum dot and quantum post using radio frequency surface acoustic waves (SAWs). We show that the occupancy state of these optically active nanostructures can be controlled via the SAW-induced dissociation of photogenerated excitons and the resulting sequential bipolar carrier injection which strongly favors the formation of neutral excitons for quantum posts in contrast to conventional quantum dots. We demonstrate high fidelity preparation of the neutral biexciton which makes this approach suitable for deterministic entangled photon pair generation. The SAW driven acoustic charge conveyance is found to be highly efficient within the wide quantum well surrounding the quantum posts. Finally we present the direct observation of acoustically triggered carrier injection into remotely positioned, individual quantum posts which is required for a low-jitter SAW-triggered single photon source.

Hubert J. Krenner; Stefan Vlk; Florian J. R. Schlein; Florian Knall; Achim Wixforth; Dirk Reuter; Andreas D. Wieck; Hyochul Kim; Tuan A. Truong; Pierre M. Petroff

2011-10-20T23:59:59.000Z

360

Prototype steam generator test at SCTI/ETEC. Acoustic program test plan. [LMFBR  

SciTech Connect

This document is an integrated test plan covering programs at General Electric (ARSD), Rockwell International (RI) and Argonne National Laboratory (CT). It provides an overview of the acoustic leak detection test program which will be completed in conjunction with the prototype LMFBR steam generator at the Energy Technology Engineering Laboratory. The steam generator is installed in the Sodium Components Test Installation (SCTI). Two acoustic detection systems will be used during the test program, a low frequency system developed by GE-ARSD (GAAD system) and a high frequency system developed by RI-AI (HALD system). These systems will be used to acquire data on background noise during the thermal-hydraulic test program. Injection devices were installed during fabrication of the prototype steam generator to provide localized noise sources in the active region of the tube bundle. These injectors will be operated during the steam generator test program, and it will be shown that they are detected by the acoustic systems.

Greene, D.A.; Thiele, A.; Claytor, T.N.

1981-10-01T23:59:59.000Z

Note: This page contains sample records for the topic "activity acoustic logs" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Planning, drilling, logging, and testing of energy extraction hole EE-1, Phases I and II  

DOE Green Energy (OSTI)

Energy Extraction Hole No. 1 (EE-1) is the second deep hole drilled into the Precambrian-age granitic rocks of the Jemez Mountains of north-central New Mexico. EE-1 was drilled to intersect a hydraulic fracture extending outward from near the bottom of previously drilled hole GT-2, thus completing the underground circulation loop required for the hot dry rock geothermal energy extraction experiment. Directional drilling techniques were used to intersect the fracture zone. In addition, high-temperature instrumentation and equipment development, hydraulic fracturing experiments, pressure-flow testing of the fracture systems, and fracture mapping and borehole-ranging technique activities were conducted. The drilling, logging, and testing operations in EE-1 are described.

Pettitt, R.A.

1977-08-01T23:59:59.000Z

362

Independent Component Analysis for Filtering Airwaves in Seabed Logging Application  

E-Print Network (OSTI)

Marine controlled source electromagnetic (CSEM) sensing method used for the detection of hydrocarbons based reservoirs in seabed logging application does not perform well due to the presence of the airwaves (or sea-surface). These airwaves interfere with the signal that comes from the subsurface seafloor and also tend to dominate in the receiver response at larger offsets. The task is to identify these air waves and the way they interact, and to filter them out. In this paper, a popular method for counteracting with the above stated problem scenario is Independent Component Analysis (ICA). Independent component analysis (ICA) is a statistical method for transforming an observed multidimensional or multivariate dataset into its constituent components (sources) that are statistically as independent from each other as possible. ICA-type de-convolution algorithm that is FASTICA is considered for mixed signals de-convolution and considered convenient depending upon the nature of the source and noise model. The res...

Ansari, Adeel; Said, Abas B Md; Ansari, Seema

2013-01-01T23:59:59.000Z

363

Filtering log data: finding the needles in the haystack  

SciTech Connect

Log data is an incredible asset for troubleshooting in large-scale systems. Nevertheless, due to the ever-growing system scale, the volume of such data becomes overwhelming, bringing enormous burdens on both data storage and data analysis. To address this problem, we present a 2-dimensional online filtering mechanism to remove redundant and noisy data via feature selection and instance selection. The objective of this work is two-fold: (i) to significantly reduce data volume without losing important information, and (ii) to effectively promote data analysis. We evaluate this new filtering mechanism by means of real environmental data from the production supercomputers at Oak Ridge National Laboratory and Sandia National Laboratory. Our preliminary results demonstrate that our method can reduce more than 85% disk space, thereby significantly reducing analysis time. Moreover, it also facilitates better failure prediction and diagnosis by more than 20%, as compared to the conventional predictive approach relying on RAS (Reliability, Availability, and Serviceability) events alone.

Yu, Li [Illinois Institute of Technology; Zheng, Ziming [Illinois Institute of Technology; Lan, Zhiling [Illinois Institute of Technology; Jones, Terry R [ORNL; Brandt, Jim [Sandia National Laboratories (SNL); Gentile, Ann [Sandia National Laboratories (SNL)

2012-01-01T23:59:59.000Z

364

Examination of insulation wear modes in geothermal logging cables  

DOE Green Energy (OSTI)

The wear mode of the Tetrafluorethylene (TFE) insulation used on an electrical logging cable is described. The cable examined in this study was used repeatedly in various harsh geothermal environments. Considering the amount of abuse the cable was subjected to, the TFE performed very well. Grooves were formed on the outside of the insulation as a result of the fluid pressure and the loading from the inner layer of metal armor. Also, indentations on the inside of the insulation were caused by the insulation molding to the conductor strands. If this mode of wear were to continue, the conductors would eventually protrude from the insulation and short out against each other or the cable armor. 4 refs., 5 figs.

Grant, T.

1985-01-01T23:59:59.000Z

365

Monte Carlo Simulations of Neutron Oil well Logging Tools  

E-Print Network (OSTI)

Monte Carlo simulations of simple neutron oil well logging tools into typical geological formations are presented.The simulated tools consist of both 14 MeV pulsed and continuous Am-Be neutron sources with time gated and continuous gamma ray detectors respectively.The geological formation consists of pure limestone with 15% absolute porosity in a wide range of oil saturation.The particle transport was performed with the Monte Carlo N-Particle Transport Code System, MCNP-4B.Several gamma ray spectra were obtained at the detector position that allow to perform composition analysis of the formation.In particular, the ratio C/O was analyzed as an indicator of oil saturation.Further calculations are proposed to simulate actual detector responses in order to contribute to understand the relation between the detector response with the formation composition

Azcurra, M

2002-01-01T23:59:59.000Z

366

Acoustic measurement of the Deepwater Horizon Macondo well flow rate  

E-Print Network (OSTI)

On May 31, 2010, a direct acoustic measurement method was used to quantify fluid leakage rate from the Deepwater Horizon Macondo well prior to removal of its broken riser. This method utilized an acoustic imaging sonar and ...

Camilli, Richard

367

Spatiotemporal processing and time-reversal for underwater acoustic communications  

E-Print Network (OSTI)

High-rate underwater acoustic communication can be achieved using transmitter/receiver arrays. Underwater acoustic channels can be characterized as rapidly time-varying systems that suffer severe Inter Symbol Interferences ...

Wang, Daniel Y

2005-01-01T23:59:59.000Z

368

Effects of Hydrogen on the Thermo-Acoustics Coupling Mechanisms...  

NLE Websites -- All DOE Office Websites (Extended Search)

on the Thermo-Acoustics Coupling Mechanisms of Low-Swirl Injector Flames in a Model Gas Turbine Combustor Title Effects of Hydrogen on the Thermo-Acoustics Coupling...

369

13.853 Computational Ocean Acoustics, Spring 2003  

E-Print Network (OSTI)

Wave equations for fluid and visco-elastic media. Wave-theory formulations of acoustic source radiation and seismo-acoustic propagation in stratified ocean waveguides. Wavenumber Integration and Normal Mode methods for ...

Schmidt, Henrik

370

Development and Testing of the MIT Acoustic Levitation Test Facilities  

Science Conference Proceedings (OSTI)

Two acoustic levitation test facilities have been developed for cloud physics experimentation. These facilities utilize acoustic standing wave energy to suspend both solid and liquid objects in a contact-free environment. In the still-air ...

Victor D. Lupi; R. John Hansman

1991-08-01T23:59:59.000Z

371

Ultrafast photo-acoustic spectroscopy of super-cooled liquids  

E-Print Network (OSTI)

Picosecond laser ultrasonic techniques for acoustic wave generation and detection were adapted to probe longitudinal and transverse acoustic waves in liquids at gigahertz frequencies. The experimental effort was designed ...

Klieber, Christoph

2010-01-01T23:59:59.000Z

372

SPARSE UNDERWATER ACOUSTIC IMAGING: A CASE STUDY Nikolaos Stefanakis  

E-Print Network (OSTI)

SPARSE UNDERWATER ACOUSTIC IMAGING: A CASE STUDY Nikolaos Stefanakis , Jacques Marchal , Valentin de Beaulieu 35042 Rennes Cedex, France ABSTRACT Underwater acoustic imaging is traditionally 3D underwater imaging using a newly built flexible-configuration sonar device. The computational

Paris-Sud XI, Université de

373

Polaris: A GPS-Navigated Ocean Acoustic Current Profiler  

Science Conference Proceedings (OSTI)

Results from an initial feasibility study to test whether Global Positioning System (GPS) navigation can be combined with more traditional acoustic methods to measure ocean current profiles are presented. A typical acoustic current profiler such ...

Kevin D. Leaman; Peter S. Vertes; Chris Rocken

1995-06-01T23:59:59.000Z

374

NASA Glenn Research Center Acoustical Testing Laboratory: Five year retrospective  

Science Conference Proceedings (OSTI)

In the five years since the NASA Glenn Research Center Acoustical Testing Laboratory (ATL) opened its doors in September

2005-01-01T23:59:59.000Z

375

Cooperative Schemes for Underwater Acoustic Communications (AQU 3)  

E-Print Network (OSTI)

Cooperative Schemes for Underwater Acoustic CommunicationsIntroduction: Underwater Cooperative CommunicationsMotivation Traditional underwater communications Used for

Madhavan Vajapeyam; Satish Vedantam; Urbashi Mitra

2006-01-01T23:59:59.000Z

376

Petrographic correlations and mathematical analysis of log signatures for clay identification  

Science Conference Proceedings (OSTI)

This report presents the results of correlation of log signature with information on distribution of the types and volumes of clays in the sandstone pore spaces determined from detailed CT-scan, XRD, SEM and thin section analyses of core samples from three sandstone reservoirs. The log signatures are then analyzed to determine if suitable mathematical/statistical parameter(s) could be calculated from the logs for identification of types and volumes of clays in sandstone reservoirs.

Sharma, B.

1992-04-01T23:59:59.000Z

377

Acoustic microscope surface inspection system and method  

DOE Patents (OSTI)

An acoustic microscope surface inspection system and method in which pulses of high frequency electrical energy are applied to a transducer which forms and focuses acoustic energy onto a selected location on the surface of an object and receives energy from the location and generates electrical pulses. The phase of the high frequency electrical signal pulses are stepped with respected to the phase of a reference signal at said location. An output signal is generated which is indicative of the surface of said selected location. The object is scanned to provide output signals representative of the surface at a plurality of surface locations.

Khuri-Yakub, Butrus T. (Palo Alto, CA); Parent, Philippe (Chilly-Mazarin, FR); Reinholdtsen, Paul A. (Seattle, WA)

1991-01-01T23:59:59.000Z

378

Acoustic Propagation Prediction in Shallow Water  

E-Print Network (OSTI)

An acoustic propagation experiment was conducted on 17 May 2000 in a shallow water site off the Perth metropolitan coast with the view of obtaining reflection and refraction data to contribute to developing a geoacoustic model of the area. The site proposed has constant bathymetry, though the geological properties of the site are not well known. The experiment used two hydrophones, one situated mid-water and the other moored to the seabed to explore the possibility of receiving head waves. The acoustic sources used were a 20-cui air gun and imploding sources comprising 60W and 75W light globes and purpose built evacuated spheres.

Justin Hoffman John; John D. Penrose; Darryl R. Mcmahon

2000-01-01T23:59:59.000Z

379

Electron-acoustic vortices in multicomponent magnetoplasma  

Science Conference Proceedings (OSTI)

Linear and nonlinear properties of electron-acoustic waves in a multicomponent magnetoplasma comprising of cold and beam electrons and two species of thermal unmagnetized ions are investigated here. It is found that the electron beam velocity, electron Debye length, electron Larmor radius, and concentration of the cold and beam electrons affect the linear dispersion characteristics of electron-acoustic wave. It is also found that such a multicomponent plasma admits dipolar and vortex street type structures for the normalized electrostatic potential PHIgeomagnetic tail, etc. is also pointed out.

Haque, Q. [Theoretical Plasma Physics Division, PINSTECH, P. O. Nilore, Islamabad 45320 (Pakistan); Mirza, Arshad M. [Department of Physics, Theoretical Plasma Physics Group, Quaid-i-Azam University, Islamabad 45320 (Pakistan); Nargis, Shahida [Department of Mathematics, Quaid-i-Azam University, Islamabad 45320 (Pakistan)

2010-05-15T23:59:59.000Z

380

Point interactions in acoustics: one dimensional models  

E-Print Network (OSTI)

A one dimensional system made up of a compressible fluid and several mechanical oscillators, coupled to the acoustic field in the fluid, is analyzed for different settings of the oscillators array. The dynamical models are formulated in terms of singular perturbations of the decoupled dynamics of the acoustic field and the mechanical oscillators. Detailed spectral properties of the generators of the dynamics are given for each model we consider. In the case of a periodic array of mechanical oscillators it is shown that the energy spectrum presents a band structure.

C. Cacciapuoti; R. Figari; A. Posilicano

2005-04-28T23:59:59.000Z

Note: This page contains sample records for the topic "activity acoustic logs" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Ion acoustic shock waves in degenerate plasmas  

SciTech Connect

Korteweg de Vries Burgers equation for negative ion degenerate dissipative plasma has been derived using reductive perturbation technique. The quantum hydrodynamic model is used to study the quantum ion acoustic shock waves. The effects of different parameters on quantum ion acoustic shock waves are studied. It is found that quantum parameter, electrons Fermi temperature, temperature of positive and negative ions, mass ratio of positive to negative ions, viscosity, and density ratio have significant impact on the shock wave structure in negative ion degenerate plasma.

Akhtar, N. [Theoretical Plasma Physics Division, PINSTECH, Nilore, Islamabad 44000 Pakistan (Pakistan); Hussain, S. [Theoretical Plasma Physics Division, PINSTECH, Nilore, Islamabad 44000 Pakistan (Pakistan); Department of Physics and Applied Mathematics, PIEAS, Nilore, Islamabad 44000 Pakistan (Pakistan)

2011-07-15T23:59:59.000Z

382

Underwater acoustic imaging: physically-motivated sparse models  

E-Print Network (OSTI)

Underwater acoustic imaging: physically-motivated sparse models and validation on real data N hal-00677287,version1-4Jun2012 #12;Underwater acoustic imaging (UWA)hal-00677287,version1-4Jun2012 #12;Underwater acoustic imaging: direct problem Successive emission sequences, or pings, indexed by p. ep

Paris-Sud XI, Université de

383

Proceedings of the 11 European Conference on Underwater Acoustics  

E-Print Network (OSTI)

Proceedings of the 11 th European Conference on Underwater Acoustics INCOHERENT CHANGE DETECTION on Underwater Acoustics images. This allows performing a segmentation of the master image at the coarser stage,version1-7Sep2012 #12;Proceedings of the 11 th European Conference on Underwater Acoustics The idea

Paris-Sud XI, Université de

384

"Tier","PRIORITY","Total Tickets Logged","Tickets Closed","Currently...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

"SCR",,421,404,17 ,,0.9952494062,0.3819951338 "Total Issues Report - STRIPES",,,,"20120101 - 20120418" "Tier","PRIORITY","Total Tickets Logged","Tickets...

385

Density Log at Fish Lake Valley Area (DOE GTP) | Open Energy...  

Open Energy Info (EERE)

Login | Sign Up Search Page Edit History Facebook icon Twitter icon Density Log at Fish Lake Valley Area (DOE GTP) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home...

386

E-print Network Web Log News: Research Communications for Scientists...  

Office of Scientific and Technical Information (OSTI)

Description This Web Log provides the latest information about changes to E-print Network - its content, features, and functionality - as well as news or information of interest...

387

Landscape of the Past: The 1815 Log House at Western Kentucky University.  

E-Print Network (OSTI)

??The 1815 Log House is located on the campus of Western Kentucky University. Built in the early 1800's by Archibald Felts, the house was occupied (more)

Alewine, Elizabeth

2008-01-01T23:59:59.000Z

388

Effects of a Thermistor String Mounted between the Acoustic Beams of an Acoustic Doppler Current Profiler  

Science Conference Proceedings (OSTI)

A useful extension of upward-looking buoy-mounted acoustic Doppler current profilers (ADCPs), in particular for studying surface-mixed-layer dynamics from underneath, would be to combine them with a thermistor cable for obtaining simultaneous ...

Friedrich Schott

1988-02-01T23:59:59.000Z

389

Acoustic transducer with damping means  

DOE Patents (OSTI)

An ultrasonic transducer specifically suited to high temperature sodium applications is described. A piezoelectric active element is joined to the transducer faceplate by coating the faceplate and juxtaposed active element face with wetting agents specifically compatible with the bonding procedure employed to achieve the joint. The opposite face of the active element is fitted with a backing member designed to assure continued electrical continuity during adverse operating conditions which can result in the fracturing of the active element. The fit is achieved employing a spring-loaded electrode operably arranged to electrically couple the internal transducer components, enclosed in a hermetically sealed housing, to accessory components normally employed in transducer applications. Two alternative backing members are taught for assuring electrical continuity. The first employs a resilient, discrete multipoint contact electrode in electrical communication with the active element face. The second employs a resilient, elastomeric, electrically conductive, damped member in electrical communication with the active element face in a manner to effect ring-down of the transducer. Each embodiment provides continued electrical continuity within the transducer in the event the active element fractures, while the second provides the added benefit of damping.

Smith, Richard W. (Richland, WA); Adamson, Gerald E. (Richland, WA)

1976-11-02T23:59:59.000Z

390

Acoustic Radar Studies of Rain Microphysics  

Science Conference Proceedings (OSTI)

Raindrop size distributions are obtained from the Doppler frequency spectrum of an acoustic radar. Number concentrations of 12 drop diameters with a minimum diameter 0.14 cm are obtained and averaged over 315 min at 20-m range gates from 20 to ...

S. G. Bradley

1997-06-01T23:59:59.000Z

391

The Acoustic Properties of Different Noise Sources  

Science Conference Proceedings (OSTI)

This paper discusses a method to find the acoustic properties of different types of background noise: highway, airport, subway, restaurant, rain, inside a car, and inside a train. Four parameters are calculated using the Auto Correlation Function (ACF). ... Keywords: Environmental noise, noise classification

Jidong Yang; Buket D. Barkana

2009-04-01T23:59:59.000Z

392

Uncanny soundscapes: Towards an inoperative acoustic community  

Science Conference Proceedings (OSTI)

Drawing on field research carried out in the abandoned villages of the Ara Valley, this article seeks to readdress notions of acoustic community and communication in terms of a 'haptic aurality' in which listening, as a mode of touch, approximates a ...

Iain Foreman

2011-12-01T23:59:59.000Z

393

Numerical Analysis Of Three Component Induction Logging In Geothermal Reservoirs  

DOE Green Energy (OSTI)

This project is supporting the development of the ''Geo-Bilt'', geothermal electromagnetic-induction logging tool that is being built by ElectroManetic Instruments, Inc. The tool consists of three mutually orthogonal magnetic field antennas, and three-component magnetic field receivers located at different distances from the source. In its current configuration, the source that has a moment aligned along the borehole axis consists of a 1m long solenoid, while the two trans-axial sources consist of 1m by 8cm loops of wire. The receivers are located 2m and 5m away from the center of the sources, and five frequencies from 2 kHz to 40 kHz are being employed. This study is numerically investigating (1) the effect of the borehole on the measurements, and (2) the sensitivity of the tool to fracture zone-geometries that might be encountered in a geothermal field. The benefits of the results are that they will lead to a better understanding of the data that the tool produces during its testing phase and an idea of what the limitations of the tool are.

Dr. David L. Alumbaugh

2002-01-09T23:59:59.000Z

394

Fluid-Rock Characterization and Interactions in NMR Well Logging  

DOE Green Energy (OSTI)

The objective of this project is to characterize the fluid properties and fluid-rock interactions that are needed for formation evaluation by NMR well logging. This is the first annual progress report submitted to the DOE. It reports on the work completed during the reporting period even if it may have started before this period. This project is a partnership between Professor George J. Hirasaki at Rice University and Professor Kishore Mohanty at University of Houston. In addition to the DOE, this project is supported by a consortium of oil companies and service companies. The fluid properties characterization has emphasized the departure of live oils from correlations based on dead oils. Also, asphaltic components can result in a difference between the T1 and T2 relaxation time distributions as well as reduce the hydrogen index. The fluid rock characterizations that are reported here are the effects of wettability and internal magnetic field gradients. A pore reconstruction method ha s been developed to recreate three-dimensional porous media from two-dimensional images that reproduce some of their key statistical properties. A Monte Carlo simulation technique has been developed to calculate the magnetization decay in fluid saturated porous media given their pore structure.

Hirasaki, George J.; Mohanty, Kishore, K.

2001-07-13T23:59:59.000Z

395

Annual Logging Symposium, June 3-6, 2007 INTERPRETATION OF FREQUENCY-DEPENDENT DUAL-  

E-Print Network (OSTI)

METHOD Wei Yang, and Carlos Torres-Verdín, The University of Texas at Austin; Ridvan Akkurt, Saleh Al at the SPWLA 48th Annual Logging Symposium held in Austin, Texas, United States, June 3-6, 2007. ABSTRACT configuration of Halliburton Energy Services' Dual Laterolog Logging Tool (DLLT-BTM ) to reproduce measurements

Torres-Verdín, Carlos

396

Annual Logging Symposium, June 3-6, 2007 QUANTITATIVE STUDIES OF RELATIVE DIP ANGLE AND BED -  

E-Print Network (OSTI)

. Mendoza, and C. Torres-Verdín, The University of Texas at Austin; W.E. Preeg, Consultant, E. Stockhausen; Chevron Energy Technology Company Copyright 2007, held jointly by the Society of Petrophysicists and Well 48th Annual Logging Symposium held in Austin, Texas, June 3-6, 2007. ABSTRACT Logging While Drilling

Torres-Verdín, Carlos

397

A new inversion method for (T2, D) 2D NMR logging and fluid typing  

Science Conference Proceedings (OSTI)

One-dimensional nuclear magnetic resonance (1D NMR) logging technology has some significant limitations in fluid typing. However, not only can two-dimensional nuclear magnetic resonance (2D NMR) provide some accurate porosity parameters, but it can also ... Keywords: Diffusion coefficient (D), Fluid typing, Transverse relaxation time (T2), Two-dimensional NMR (2D NMR) logging

Maojin Tan; Youlong Zou; Cancan Zhou

2013-02-01T23:59:59.000Z

398

CAPRI: a tool for mining complex line patterns in large log data  

Science Conference Proceedings (OSTI)

Log files provide important information for troubleshooting complex systems. However, the structure and contents of the log data and messages vary widely. For automated processing, it is necessary to first understand the layout and the structure of the ... Keywords: association rule, line, term, type-casting, value pattern mining

Farhana Zulkernine; Patrick Martin; Wendy Powley; Sima Soltani; Serge Mankovskii; Mark Addleman

2013-08-01T23:59:59.000Z

399

"I know what you did last summer": query logs and user privacy  

Science Conference Proceedings (OSTI)

We investigate the subtle cues to user identity that may be exploited in attacks on the privacy of users in web search query logs. We study the application of simple classifiers to map a sequence of queries into the gender, age, and location of the user ... Keywords: k-anonymity, privacy, query log analysis

Rosie Jones; Ravi Kumar; Bo Pang; Andrew Tomkins

2007-11-01T23:59:59.000Z

400

Adaptive Fluid Electrical Conductivity Logging to Determine the Salinity Profiles in Groundwater  

E-Print Network (OSTI)

Adaptive Fluid Electrical Conductivity Logging to Determine the Salinity Profiles in Groundwater(t) Analysis Method · Integrate C(z,t), or FEC profile, over z of logged interval to get salinity mass per unit salinity TMDL requires wetland management of salt loads to the San Joaquin River · Dearth of groundwater

Quinn, Nigel

Note: This page contains sample records for the topic "activity acoustic logs" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Improving the performance of log-structured file systems with adaptive block rearrangement  

Science Conference Proceedings (OSTI)

Log-Structured File System (LFS) is famous for its optimization for write performance. Because of its append-only nature, garbage collection is needed to reclaim the space occupied by the obsolete data. The cleaning overhead could significantly decrease ... Keywords: data rearrangement, garbage collection, log-structured file system

Mei-Ling Chiang; Jia-Shin Huang

2007-03-01T23:59:59.000Z

402

Annual Logging Symposium, June 16-20, 2012 SATURATION-HEIGHT AND INVASION CONSISTENT HYDRAULIC  

E-Print Network (OSTI)

neutron source, geochemical logs, B:153­155 caliper logs, vs. depth, A:88­91 carbon dioxide vs. crustal compensated neutron tool coercivity, basalts, B:149 compensated neutron tool, Site 843, B:153. carbon dioxide of basalts, B:144 crust, oceanic geochemistry, B:116 physical properties, B:161

Torres-Verdín, Carlos

403

Coherence-Centric Logging and Recovery for Home-Based Software Distributed Shared Memory  

E-Print Network (OSTI)

Coherence-Centric Logging and Recovery for Home-Based Software Distributed Shared Memory Angkul, called the coherence-centric logging (CCL) and re- covery protocol, for home-based SDSM. Our CCL mini access latency by overlapping disk accesses with coherence-induced com- munication existing in home-based

Tzeng, Nian-Feng

404

Small Log Conference Creating Capacity to Compete Coeur d'Alene, Idaho, USA, 1 April 2005  

E-Print Network (OSTI)

Small Log Conference ­ Creating Capacity to Compete Coeur d'Alene, Idaho, USA, 1 April 2005 F A O Conference ­ Creating Capacity to Compete Coeur d'Alene, Idaho, USA, 1 April 2005 F A O Contents I. Forest. Growing the market #12;Small Log Conference ­ Creating Capacity to Compete Coeur d'Alene, Idaho, USA, 1

405

Bounds and Approximations for Sums of Dependent Log-Elliptical Random Variables  

E-Print Network (OSTI)

Dhaene, Denuit, Goovaerts, Kaas & Vyncke (2002a,b) have studied convex bounds for a sum of dependent random variables and applied these to sums of log-normal random variables. In particular, they have shown how these convex bounds can be used to derive closed-form approximations for several of the risk measures of such a sum. In this paper we investigate to which extent their general results on convex bounds can also be applied to sums of log-elliptical random variables which incorporate sums of log-normals as a special case. Firstly, we show that unlike the log-normal case, for general sums of log-ellipticals the convex lower bound does no longer result in closed form approximations for the different risk measures. Secondly, we demonstrate how instead the weaker stop-loss order can be used to derive such closed form approximations. We also present numerical examples to show the accuracy of the proposed approximations.

unknown authors

2008-01-01T23:59:59.000Z

406

FMI Log At Maui Area (DOE GTP) | Open Energy Information  

Open Energy Info (EERE)

Maui Area (DOE GTP) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Single-Well and Cross-Well Resistivity At Maui Area (DOE GTP) Exploration...

407

Acoustic Imaging Evaluation of Juvenile Salmonid Behavior in the Immediate Forebay of the Water Temperature Control Tower at Cougar Dam, 2010  

Science Conference Proceedings (OSTI)

This report presents the results of an evaluation of juvenile Chinook salmon (Oncorhynchus tshawytscha) behavior at Cougar Dam on the south fork of the McKenzie River in Oregon in 2010. The study was conducted by the Pacific Northwest National Laboratory for the U.S. Army Corps of Engineers (USACE). The overall goal of the study was to characterize juvenile salmonid behavior and movement patterns in the immediate forebay of the Water Temperature Control (WTC) tower of the dam for USACE and fisheries resource managers use in making decisions about bioengineering designs for long-term structures and/or operations to facilitate safe downstream passage for juvenile salmonids. We collected acoustic imaging (Dual-Frequency Identification Sonar; DIDSON) data from March 1, 2010, through January 31, 2011. Juvenile salmonids (hereafter, called 'fish') were present in the immediate forebay of the WTC tower throughout the study. Fish abundance index was low in early spring (fish per sample-day), increased in late April, and peaked on May 19 (6,039 fish). A second peak was observed on June 6 (2904 fish). Fish abundance index decreased in early June and remained low in the summer months (fish per sample-day). During the fall and winter, fish numbers varied with a peak on November 10 (1881 fish) and a minimum on December 7 (12 fish). A second, smaller, peak occurred on December 22 (607 fish). A univariate statistical analysis indicated fish abundance index (log10-transformed) was significantly (Pfish abundance (log-transformed index values) using two independent variables of mean forebay elevation and the log10 of the forebay elevation range. From the approximate fish length measurements made using the DIDSON imaging software, the average fish length during early spring 2010 was 214 {+-} 86 mm (standard deviation). From May through early November, the average fish length remained relatively consistent (132 {+-} 54 mm), after which average lengths increased to 295 {+-} 148 mm for mid-November though early December. From mid-December through January the average fish length decreased to 151 {+-} 76 mm. Milling in front of the WTC tower was the most common fish behavior observed throughout the study period. Traversing along the front of the tower, east-to-west and west-to-east, was the next common behavior. The percentage of fish events showing movement from the forebay to the tower or from the tower to the forebay was generally low throughout the spring, summer, and early fall (0 to 30% for both directions combined, March through early November). From mid-November 2010 through the end of the study (January 31, 2011), the combined percentages of fish moving into and out of the tower were higher (25 to 70%) than during previous months of the study. Schooling behavior was most distinct in the spring. Schooling events were present in 30 to 96% of the fish events during that period, with a peak on May 19. Schooling events were also present in the summer, but at lower numbers. With the exception of some schooling in mid-December, few to no schooling events were observed in the fall and winter months. Diel distributions for schooling fish during spring and fall months indicate schooling was concentrated during daylight hours and no schooling was observed at night. However, in December, schooling occurred at night, after midnight, and during daylight hours. Predator activity, most likely bull trout or rainbow trout according to a USACE biologist, was observed during late spring, when fish abundance index and schooling were highest for the year, and again in the fall months when fish events increased from a summer low. No predator activity was observed in the summer, and little activity occurred during the winter months.

Khan, Fenton; Johnson, Gary E.; Royer, Ida M.; Phillips, Nathan RJ; Hughes, James S.; Fischer, Eric S.; Ham, Kenneth D.; Ploskey, Gene R.

2012-04-01T23:59:59.000Z

408

Argonne Acoustic Levitation Video Goes Viral  

NLE Websites -- All DOE Office Websites (Extended Search)

"Inside the Advanced Photon Source" Inside the latest Argonne Now "Inside the Advanced Photon Source" Inside the latest Argonne Now APS Director Stephenson Named Argonne Distinguished Fellow Advanced Photon Source, Canadian Light Source Strengthen Ties, Expand X-ray Technology and Research Rose of APS and CNM One of Four DOE Early Career Award Winners Scientists Close-In on Artificial Spider Silk APS News Archives: 2012 | 2011 | 2010 | 2009 2008 | 2007 | 2006 | 2005 2004 | 2003 | 2002 | 2001 2000 Subscribe to APS News rss feed Argonne Acoustic Levitation Video Goes Viral SEPTEMBER 25, 2012 Bookmark and Share Drops of solution being suspended for a long period of time, thanks to the vibrational force of sound waves that keep them stationary in an air column. More than 41,000 Google hits for "acoustic levitation Argonne" as of

409

Acoustic data transmission through a drillstring  

DOE Patents (OSTI)

A method and apparatus for acoustically transmitting data along a drillstring is presented. In accordance with one embodiment of the present invention, acoustic data signals are conditioned to counteract distortions caused by the drillstring. Preferably, this conditioning step comprises multiplying each frequency component of the data signal by exp (-ikL) where L is the transmission length of the drillstring, k is the wave number in the drillstring at the frequency of each component and i is (-1).sup.1/2. In another embodiment of this invention, data signals having a frequency content in at least one passband of the drillstring are generated preferably traveling in only one direction (e.g., up the drillstring) while echoes in the drillstring resulting from the data transmission are suppressed.

Drumheller, Douglas S. (Cedar Crest, NM)

1992-01-01T23:59:59.000Z

410

Development of a geothermal acoustic borehole televiewer  

DOE Green Energy (OSTI)

Most geothermal wells are drilled in hard rock formations where fluid flow is through systems of open fractures. Productivity of these wells is usually determined by the extent of intersection of the wellbore with the fracture system. A need exists for fracture mapping methods and tools which can operate in a geothermal environment. In less hostile environments, the acoustic borehole televiewer has been shown to be a useful tool for determining location, orientation, and characterization of fractures as they intersect the borehole and for general wellbore and casing inspection. The development conducted at Sandia National Laboratories to adapt an acoustic borehole televiewer for operation in a geothermal environment is described. The modified instrument has been successfully tested at temperatures as high as 280/sup 0/C and pressures up to 5000 psi, and used successfully to map fractures and casing damage in geothermal wells.

Heard, F.E.; Bauman, T.J.

1983-08-01T23:59:59.000Z

411

Pulse combusted acoustic agglomeration apparatus and process  

SciTech Connect

An improved apparatus and process for removal of particulates entrained in a gas stream are provided. The removal process employs a pulse combustor to provide an acoustic pressure wave to acoustically enhance bimodal agglomeration of particulates which may be collected and removed using a conventional separation apparatus. A particulate having a size different from the size of the particulate in the gas stream to be cleaned is introduced into the system to effectuate the bimodal process. The apparatus may be employed as a direct fired system for improved operation of gas-operated equipment such as a gas turbine, or may, alternatively, be employed as an add-on subsystem for combustion exhaust clean-up. Additionally, the added particulate may be a sorbent for effecting sorption of other contaminants such as sulfur. Various other particulates for contaminant removal may also be introduced into the system as exemplified by alkali-gettering agents.

Mansour, Momtaz N. (Columbia, MD)

1993-01-01T23:59:59.000Z

412

Pulse combusted acoustic agglomeration apparatus and process  

SciTech Connect

An improved apparatus and process for removal of particulates entrained in a gas stream are provided. The removal process employs a pulse combustor to provide an acoustic pressure wave to acoustically enhance agglomeration of particulates which may be collected and removed using a conventional separation apparatus. The apparatus may be employed as a direct fired system for improved operation of gas-operated equipment such as a gas turbine, or may, alternatively, be employed as an add-on subsystem for combustion exhaust clean-up. Additionally, added particulates may include a sorbent for effecting sorption of other contaminants such as sulfur. Various other particulates for contaminant removal may also be introduced into the system as exemplified by alkali-gettering agents.

Mansour, Momtaz N. (Columbia, MD); Chandran, Ravi (Ellicott City, MD)

1994-01-01T23:59:59.000Z

413

Acoustic data transmission through a drillstring  

DOE Patents (OSTI)

A method and apparatus for acoustically transmitting data along a drillstring are presented. In accordance with one embodiment of the present invention, acoustic data signals are conditioned to counteract distortions caused by the drillstring. Preferably, this conditioning step comprises multiplying each frequency component of the data signal by exp ([minus]ikL) where L is the transmission length of the drillstring, k is the wave number in the drillstring at the frequency of each component and i is ([minus]1)[sup 1/2]. In another embodiment of this invention, data signals having a frequency content in at least one passband of the drillstring are generated preferably traveling in only one direction (e.g., up the drillstring) while echoes in the drillstring resulting from the data transmission are suppressed. 20 figs.

Drumheller, D.S.

1992-07-07T23:59:59.000Z

414

Methods And Apparatus For Acoustic Fiber Fractionation  

DOE Patents (OSTI)

Methods and apparatus for acoustic fiber fractionation using a plane ultrasonic wave field interacting with water suspended fibers circulating in a channel flow using acoustic radiation forces to separate fibers into two or more fractions based on fiber radius, with applications of the separation concept in the pulp and paper industry. The continuous process relies on the use of a wall-mounted, rectangular cross-section piezoelectric ceramic transducer to selectively deflect flowing fibers as they penetrate the ultrasonic field. The described embodiment uses a transducer frequency of approximately 150 kHz. Depending upon the amount of dissolved gas in water, separation is obtained using a standing or a traveling wave field.

Brodeur, Pierre (Smyrna, GA)

1999-11-09T23:59:59.000Z

415

Temperature logging as an aid to understanding groundwater flow in boreholes  

SciTech Connect

Borehole temperatures are affected by a range of physical phenomena, including drilling and engineering procedures, thermal resistivity of the rock, surface climatic changes, local heat sources and sinks, free convection of the borehole fluid, and water flows inside the borehole. As a result, temperature logs provide unique information not available from other logs. On the other hand, because the temperature log is sensitive to a variety of phenomena, one or more of these may obscure the effect being studied. In the case where groundwater is entering the borehole at one depth and exiting at another depth (or at the surface) the temperature disturbance resulting from this flow is likely to be a prominent feature of the temperature profile of the borehole. Because of this, water flows in boreholes are often a source of noise in temperature logs, obscuring the features of interest. Recently, however, unusual groundwater behavior was noted in several boreholes at the Nevada Test Site (NTS), and temperature logs were run as part of a program to study this phenomenon. In this case the groundwater flow has been the feature of interest in the logs, and the logs have been useful as an aid in understanding the water flow in those boreholes.

Conaway, J.G.

1987-01-01T23:59:59.000Z

416

Baseline neutron logging measurements in the drift scale test  

Science Conference Proceedings (OSTI)

The Drift Scale Test (DST) is one of the thermal tests being conducted in the Exploratory Studies Facility (ESF). One of the objectives of the DST is to study the coupled thermal-mechanical- hydrological-chemical (TMHC) processes in the ESF at the repository horizon of the potential high-level nuclear waste repository in Yucca Mountain, Nevada. The objectives, the test design, and the test layouts of the DST are included in the test design report by CRWMS M&O Contractor LLNL. The configuration of the DST includes a declining Observation Drift driven mostly east and downward from main tunnel in the ESF, at about 2.827 km from the North portal. The downward slope of the Observation Drift (11.5 to 14.0 percent) ensures a minimum 10 m of middle nonlithophysal Topopah Spring Tuff as the overburden for the DST. The length of the Observation Drift is about 136 m. At the elevation of the DST crown (nominally 10 m below the upper extent of the middle nonlithophysal Topopah Spring Tuff) the Connecting Drift breaks out to the north from the Observation Drift, 136 m from the main tunnel of the ESF. The Connecting Drift extends approximately 40 m to the north from the Observation Drift. A Heater Drift breaks out westward from the Connecting Drift at about 30 m from the Observation Drift. The Heater Drift consists of an 11 m long entry, which includes a plate- loading niche, and a 47 m long heated drift. The nominal diameter of the drifts is 5 m. The detail configuration of the DST, including diagrams showing the drift and borehole layout, is included in the test design report by CRWMS M&O Contractor LLNL. Thermal neutron logging is a method used to determine moisture content in rocks and soils and will be used to monitor moisture content in boreholes ESF-HD-NEU-1 to ESF-HD-NEU-10 (Boreholes 47 to 51 and 64 to 68), ESF-HD-TEMP-1 (Borehole 79), and ESF-HD-TEMP-2 (Borehole 80) in the DST. The neutron probe contains a source of high energy neutrons and a detector for slow (thermal) neutrons. Water present in rocks slows down the neutrons making them detectable (because of the presence of hydrogen).

Lin, W.; Carlson, R.; Neubaurer, D.

1998-01-01T23:59:59.000Z

417

Acoustic enhancement for photo detecting devices  

DOE Patents (OSTI)

Provided are improvements to photo detecting devices and methods for enhancing the sensitivity of photo detecting devices. A photo detecting device generates an electronic signal in response to a received light pulse. An electro-mechanical acoustic resonator, electrically coupled to the photo detecting device, damps the electronic signal and increases the signal noise ratio (SNR) of the electronic signal. Increased photo detector standoff distances and sensitivities will result.

Thundat, Thomas G; Senesac, Lawrence R; Van Neste, Charles W

2013-02-19T23:59:59.000Z

418

Density logging and density of rocks in Rainier Mesa Area, Nevada Test Site  

SciTech Connect

Density logs from all 35 vertical drill holes in the Rainier Mesa area in which logs were obtained were evaluated and the distribution of densities of units in the geologic section was derived. Densities were obtained in only 10 holes in which calibrated logging tools had been run. The logs from an additional 10 holes were calibrated with core. Densities vary from nearly 1 g/cc in tunnel bed 5 to over 2.8 g/cc in the dolomitic rocks. Log densities were found to agree well with core data in those subunits (chiefly within tunnel beds 3 and 4) where an adequate number of core measurements were available for comparison. Lithologic correlations based on density log signatures were found to extend for more than 8 km in several units and subunits in the area. Although the volcanic rocks in the Rainier Mesa area are comprised of a wider spectrum of minerals than the petroliferous rocks generally involved in most commercial logging applications, grain density may be estimated with good accuracy with only a knowledge of glass and zeolite content. The variability of the Z/A ratio of the matrix in these volcanic rocks is also negligible compared to the value of 0.5 generally assumed in density logging. However, due to the assumptions made concerning the Z/A of water in deriving the output of commercial density tools, one should be aware of the errors inherent in assuming that recorded log densities are true densities. These errors are normally small, being less than 3 percent for compensated limestone'' tools and 2 percent for tools which output electron density. 35 refs., 25 figs., 12 tabs.

Carroll, R.D.

1989-01-01T23:59:59.000Z

419

Silent Positioning in Underwater Acoustic Sensor Networks  

E-Print Network (OSTI)

In this paper, we present a silent positioning scheme termed as UPS for underwater acoustic sensor networks. UPS relies on the time-difference of arrivals measured locally at a sensor to detect range differences from the sensor to four anchor nodes. These range differences are averaged over multiple beacon intervals before they are combined to estimate the 3D sensor location through trilateration. UPS requires no time-synchronization and provides location privacy at underwater vehicles/sensors whose locations need to be determined. To study the performance of UPS, we model the underwater acoustic channel as a modified Ultra Wide Band (UWB) S-V model: the arrival of each path cluster and paths within each cluster follow double Poisson distributions, and the multipath channel gain follows a Rician distribution. Based on this channel model, we perform both theoretical analysis and simulation study on the position error of UPS under acoustic fading channels. The obtained results indicate that UPS is an effective scheme for underwater vehicle/sensor self-positioning.

Xiuzhen Cheng; Haining Shu; Qilian Liang; David Hung-chang Du

2007-01-01T23:59:59.000Z

420

Coal log pipeline research at the University of Missouri. 1st Quarterly report for 1995, January 1, 1995--March 31, 1995  

SciTech Connect

Work continued on the study of coal log pipeline research. Individual projects described include fast compaction of coal logs; effect of cooling on coal log quality; coal log capping; effectiveness of adding fiber to enhance coal log quality; fabrication using hydrophobic binders; cost estimation of different lubricants; automatic control of coal log pipeline system; CLP design; coal log train transport; economics of coal log pipeline; legal aspects; heating, cooling, and drying of logs; vacuum systems to enhance production; design; and effect of piston modification on capping.

Liu, H.

1995-08-01T23:59:59.000Z

Note: This page contains sample records for the topic "activity acoustic logs" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Underwater Acoustic Detection of Ultra High Energy Neutrinos  

E-Print Network (OSTI)

We investigate the acoustic detection method of 10^18-20 eV neutrinos in a Mediterranean Sea environment. The acoustic signal is re-evaluated according to dedicated cascade simulations and a complex phase dependant absorption model, and compared to previous studies. We detail the evolution of the acoustic signal as function of the primary shower characteristics and of the acoustic propagation range. The effective volume of detection for a single hydrophone is given taking into account the limitations due to sea bed and surface boundaries as well as refraction effects. For this 'benchmark detector' we present sensitivity limits to astrophysical neutrino fluxes, from which sensitivity bounds for a larger acoustic detector can be derived. Results suggest that with a limited instrumentation the acoustic method would be more efficient at extreme energies, above 10^20 eV.

V. Niess; V. Bertin

2005-11-21T23:59:59.000Z

422

Electret Acoustic Transducer Array For Computerized Ultrasound Risk Evaluation System  

DOE Patents (OSTI)

An electret-based acoustic transducer array is provided and may be used in a system for examining tissue. The acoustic transducer array is formed with a substrate that has a multiple distinct cells formed therein. Within each of the distinct cells is positioned an acoustic transducing element formed of an electret material. A conductive membrane is formed over the distinct cells and may be flexible.

Moore, Thomas L. (Livermore, CA); Fisher, Karl A. (Brentwood, CA)

2005-08-09T23:59:59.000Z

423

Gas sensor technology at Sandia National Laboratories: Catalytic gate, Surface Acoustic Wave and Fiber Optic Devices  

DOE Green Energy (OSTI)

Sandia`s gas sensor program encompasses three separate electronic platforms: Acoustic Wave Devices, Fiber Optic Sensors and sensors based on silicon microelectronic devices. A review of most of these activities was presented recently in a article in Science under the title ``Chemical Microsensors.`` The focus of the program has been on understanding and developing the chemical sensor coatings that are necessary for using these electronic platforms as effective chemical sensors.

Hughes, R.C.; Moreno, D.J.; Jenkins, M.W.; Rodriguez, J.L.

1993-10-01T23:59:59.000Z

424

Grade Assignments for Models Used for Calibration of Gross-Count Gamma-Ray Logging Systems (December 1983)  

Energy.gov (U.S. Department of Energy (DOE))

Grade Assignments for Models Used for Calibration of Gross-Count Gamma-Ray Logging Systems (December 1983)

425

Acoustic ranging technique with application to assessment of low-frequency acoustic noise of wind turbines  

DOE Green Energy (OSTI)

Impulsive low-frequency noise from wind turbines can cause annoyance particularly when a residential structure is involved. Such noise is typically generated in some spatially restricted region of a turbine rotor swept area. Low-frequency impulsive noise of the MOD-1 turbine was generated when the rotor blades passed downwind of the tower legs encountering the complex unsteady flows there. An acoustic ranging technique that aids assessment of the degree of concentration of acoustic generation within the turbine swept area and which determines the time-average spatial source region of such concentration is described. Practical applications and limitations of the process are discussed.

Hemphill, R.

1983-05-01T23:59:59.000Z

426

Underwater Acoustic Sensor Network with Energy Harvesting Nodes.  

E-Print Network (OSTI)

??This thesis explores the possibility of a self sustained and service free Underwater Acoustic Sensor Network (UASN). The network nodes are installed along a subsea (more)

Huseby, Morten

2011-01-01T23:59:59.000Z

427

High Frequency Acoustic Wave Scattering From Turbulent Premixed Flames .  

E-Print Network (OSTI)

??This thesis describes an experimental investigation of high frequency acoustic wave scattering from turbulent premixed flames. The objective of this work was to characterize the (more)

Narra, Venkateswarlu

2008-01-01T23:59:59.000Z

428

WIRELESS MICROWAVE ACOUSTIC SENSOR SYSTEM FOR CONDITION MONITORING...  

NLE Websites -- All DOE Office Websites (Extended Search)

WIRELESS MICROWAVE ACOUSTIC SENSOR SYSTEM FOR CONDITION MONITORING IN POWER PLANT ENVIRONMENTS Project DE-FE0007379TDD NETL, Morgantown, WV, March 14, 2012. DOE NETL Program:...

429

Nondestructive acoustic electric field probe apparatus and method  

DOE Patents (OSTI)

The disclosure relates to a nondestructive acoustic electric field probe and its method of use. A source of acoustic pulses of arbitrary but selected shape is placed in an oil bath along with material to be tested across which a voltage is disposed and means for receiving acoustic pulses after they have passed through the material. The received pulses are compared with voltage changes across the material occurring while acoustic pulses pass through it and analysis is made thereof to determine preselected characteristics of the material.

Migliori, Albert (Santa Fe, NM)

1982-01-01T23:59:59.000Z

430

MAC and Routing Protocols for Mobile Underwater Acoustic Sensor Swarms  

E-Print Network (OSTI)

Pressure Routing for Underwater Sensor Networks . . . . . .of Aloha Protocols for Underwater Acoustic Sensor Networks.Critical Applications in Underwater Sensor Networks. In

Noh, Young Tae

2012-01-01T23:59:59.000Z

431

Use of an acoustic network as an underwater positioning system .  

E-Print Network (OSTI)

??Underwater acoustic networks provide an interface between UUVs and surface or land-based control systems. By exploiting range data measured incidental to communications on these networks (more)

Reed, Michael S.

2006-01-01T23:59:59.000Z

432

Using Scanning Acoustic Microscopy to Study Subsurface Defects ...  

Science Conference Proceedings (OSTI)

The resolution of the reflection acoustic microscope is somewhat better than the resolution based on the Rayleigh criterion and is given by the equation6:...

433

Nonprofit Organizations: Have Your Los Alamos Employees/Retirees Log Hours  

NLE Websites -- All DOE Office Websites (Extended Search)

Nonprofit Organizations: Have Your Los Alamos Employees/Retirees Log Nonprofit Organizations: Have Your Los Alamos Employees/Retirees Log Hours in VolunteerMatch Community Connections: Our link to Northern New Mexico Communities Latest Issue:Dec. 2013 - Jan. 2014 All Issues » submit Nonprofit Organizations: Have Your Los Alamos Employees/Retirees Log Hours in VolunteerMatch Lab employees and retirees should log their VolunteerMatch hours to benefit local nonprofits. March 1, 2013 Volunteers help fill sandbags during flood season Volunteers help in many different roles including in healthcare. Contacts Editor Linda Anderman Email Community Programs Office Kurt Steinhaus Email So far, employees and retirees have volunteered more than 1.2 million volunteer hours. If you are a nonprofit organization that has Lab employees or retirees as

434

ITTF-016 Website Development-Maintenance Log 09_0909 EOTA - Business Form  

NLE Websites -- All DOE Office Websites (Extended Search)

6 Website Development-Maintenance Log 09_0909 6 Website Development-Maintenance Log 09_0909 EOTA - Business Form Document Title: ITTP-015 Web Site Development / Maintenance Document Number: Website Development and Maintenance log ITT Melissa Otero N/A Referenced Documents: Parent Document: ITTF-016 Rev. 11_0419 Approvers: Melissa Otero Document Owner: Ben Aragon Backup Owner: Notify of Changes: A B 08_0818 Revision History: Rev. Description of Change Intitial Release. Added headings to address to include: Performance Requirements, Statutory and Regulatory Requirements, Information from Previous Similar Designs, and Other Requirements. Added additional column to indicate "Estimated Completion Date" of WSD projects. "Design Verification Complete" and "Design Validation Complete" columns removed from log.

435

LOG-IN Africa local governance and ICTs research network for Africa  

Science Conference Proceedings (OSTI)

LOG-IN Africa is an emergent pan-African network of researchers and research institutions from nine countries (Egypt, Ethiopia, Kenya, Mauritius, Morocco, Mozambique, Senegal, South Africa, and Uganda). It will assess the current state and outcomes of ...

Gianluca Misuraca

2006-05-01T23:59:59.000Z

436

NERC corporate Planet Earth online Grants Studentships Science benefits Research papers Contact us | Log in  

E-Print Network (OSTI)

cooling schemes Atomic bombs date fake drams MOST POPULAR NEWS 1. Atomic bombs date fake drams 2 | Log in SEARCH Search term(s) HOME LATEST NEWS FEATURES & SPECIAL REPORTS MULTIMEDIA BLOGS

Cambridge, University of

437

Poster for the paper "A Log Service Package for the ATLAS TDAQ/DCS Group"  

E-Print Network (OSTI)

This is the poster for the paper "A new design and implementation of the ATLAS Log Service package", which has been accepted in the International Conference on Computing in High Energy and Nuclear Physics (CHEP) 2010.

Murillo Garca, R; The ATLAS collaboration

2010-01-01T23:59:59.000Z

438

Precise inversion of logged slownesses for elastic parameters in a gas shale formation  

E-Print Network (OSTI)

Dipole sonic log data recorded in a vertical pilot well and the associated production well are analyzed over a 2001100-ft section of a North American gas shale formation. The combination of these two wells enables angular ...

Miller, Douglas E.

439

Simulating the Upper Barren Zone and the Ore Zone tests performed with the EMC logging tool  

SciTech Connect

The primary purpose of the Multispectral Nuclear Logging project is to assess the effectiveness of applying nuclear borehole-logging techniques to the Department of Energy`s (DOE) Environmental Restoration (ER) program, adapt the technology to improve these capabilities, and transfer that technology to industry. The purpose of the Monte Carlo simulations using MCNP is to predict the minimum concentration levels for environmental contaminants that could be detected by Multispectral Logging (MSL). The Monte Carlo code used for this type of simulation, MCNP, should be benchmarked against experimental data to show that the user can accurately reproduce the proper gamma-ray spectrum. Experimental data was obtained from Westinghouse-Hanford Company using the Environmental Measurements Corp. (EMC) logging tool in the Upper Barren Zone (UBZ) and Ore Zone (OZ) calibration models at Grand Junction. This paper continues the discussion of benchmarking MCNP using the UBZ and OZ data.

Frankle, S.C.

1994-09-01T23:59:59.000Z

440

Technical memorandum on analysis of the EU ETS using the community independent transaction log  

E-Print Network (OSTI)

This memorandum provides an overview of three deficiencies within the current presentation of the Community Independent Transaction Log (CITL) data that have implications for researchers' ability to accurately analyze the ...

McGuinness, Meghan

2007-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "activity acoustic logs" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

High-energy photon transport modeling for oil-well logging  

E-Print Network (OSTI)

Nuclear oil well logging tools utilizing radioisotope sources of photons are used ubiquitously in oilfields throughout the world. Because of safety and security concerns, there is renewed interest in shifting to ...

Johnson, Erik D., Ph. D. Massachusetts Institute of Technology

2009-01-01T23:59:59.000Z

442

Lithology and hydrothermal alteration determination from well logs for the Cerro Prieto Wells, Mexico  

DOE Green Energy (OSTI)

The purpose of this study is to examine the characteristics of geophysical well logs against the sand-shale series of the sedimentary column of the Cerro Prieto Geothermal Field, Mexico. The study shows that the changes in mineralogy of the rocks because of hydrothermal alteration are not easily detectable on the existing logs. However, if the behavior of clay minerals alone is monitored, the onset of the hydrothermally altered zones may be estimated from the well logs. The effective concentration of clay-exchange cations, Q/sub v/, is computed using the data available from conventional well logs. Zones indicating the disappearance of low-temperature clays are considered hydrothermally altered formations with moderate to high-permeability and temperature, and suitable for completion purposes.

Ershaghi, I.; Ghaemian, S.; Abdassah, D.

1981-10-01T23:59:59.000Z

443

Study of well logs from Cove Fort-Sulphurdale KGRA, Millard and Beaver Counties, Utah  

DOE Green Energy (OSTI)

Union Oil Company drilled four geothermal test wells in the Cove Fort-Sulphurdale KGRA between 1975 and 1979. A fairly complete suite of well logs were recorded for the three deeper holes, and these data are presented as composite well log plots in this report. The composite well log plots have facilitated the interpretation of limestone, dolomite, sandstone, quartz-monzonite, serpentine, and volcanic lithologies and the identification of numerous fractures. This has been especially helpful because of the extensive lost circulaton zones and poor cuttings recovery. Intraformational flow was identified by a fluid migration-temperature tracer log at depth in CFSU 31-33. Well log crossplots were computed to assist in lithologic identification and the determination of physical properties for specific depth intervals in a given hole. The presence of hydrous minerals sometimes results in neutron porosity somewhat higher than the true nonfracture porosity, which is generally less than 4%. Permeability is clearly controlled by fractures. A maximum well temperature of 178.9/sup 0/C, low flow rates and low probable percent flash indicate these wells are subeconomic for electric generation at present. The well log study has substantially improved our understanding of the reservoir as presently drilled.

Glenn, W.E.; Ross, H.P.

1982-07-01T23:59:59.000Z

444

Acoustic Environment of Admiralty Inlet: Broadband Noise Measurements  

SciTech Connect

Admiralty Inlet has been selected as a potential tidal energy site. It is located near shipping lanes, is a highly variable acoustic environment, and is frequented by the highly endangered southern resident killer whale (SRKW). Resolving environmental impacts is the first step to receiving approval to deploy tidal turbines at Admiralty Inlet. Of particular concern is the potential for blade strike or other negative interactions between the SRKW and the tidal turbine. A variety of technologies including passive and active monitoring systems are being considered as potential tools to determine the presence of SRKW in the vicinity of the turbines. Broadband noise level measurements are critical for the determination of design and operation specifications of all marine and hydrokinetic energy capture technologies. Acoustic environment data at the proposed site was acquired at different depths using a cabled vertical line array (VLA) with four calibrated hydrophones. The sound pressure level (SPL) power spectrum density was estimated based on the fast Fourier transform. This study describes the first broadband SPL measurements for this site at different depths with frequency ranging from 10 kHz to 480 kHz in combination with other information. To understand the SPL caused by this bedload transport, three different pressure sensors with temperature and conductivity were also assembled on the VLA to measure the conditions at the hydrophone deployment depth. The broadband SPL levels at frequency ranges of 3 kHz to 7 kHz as a function of depth were estimated. Only the hydrophone at an average depth of 40 m showed the strong dependence of SPL with distance from the bottom, which was possibly caused by the cobbles shifting on the seabed. Automatic Identification System data were also studied to understand the SPL measurements.

Xu, Jinshan; Deng, Zhiqun; Martinez, Jayson J.; Carlson, Thomas J.; Myers, Joshua R.; Weiland, Mark A.; Jones, Mark E.

2011-09-30T23:59:59.000Z

445

Borehole-Wall Imaging with Acoustic and Optical Televiewers for...  

Open Energy Info (EERE)

and interpretation of flowmeter and other geophysical logs, core samples, and hydraulic and water-quality data from packer testing and monitoring. Authors John H. Williams...

446

Self-adaptive methods for acoustic focusing and mode extraction in a shallow ocean waveguide  

E-Print Network (OSTI)

1.1 Time-reversal in the shallow ocean . . . . . .applications versus ocean acoustic SONAR and communicationsH. Schmidt, Computational Ocean Acoustics, (AIP New York,

Walker, Shane C.

2005-01-01T23:59:59.000Z

447

Spectrally efficient underwater acoustic communications : channel characterization and design aspects for OFDM  

E-Print Network (OSTI)

with L = 9 for an underwater channel impulse response with Ladaptive modulation in underwater acoustic communications,Adaptive OFDM for underwater acoustic channels with limited

Radoevi?, Andreja

2012-01-01T23:59:59.000Z

448

iCalm: Wearable Sensor and Network Architecture for Wirelessly Communicating and Logging Autonomic Activity  

E-Print Network (OSTI)

Widespread use of affective sensing in healthcare applications has been limited due to several practical factors, such as lack of comfortable wearable sensors, lack of wireless standards, and lack of low-power affordable ...

Dobson, Kelly

449

Requests are subject to edit upon entering into SIS+ ACTIVITY LOG  

E-Print Network (OSTI)

Energy Systems and Resources New Course -- -- -- -- 12/15/2007 ENG ENGR 411 Nuclear Reactor Theory New Course -- -- -- -- 12/15/2007 ENG ENGR 412 Nuclear Reactor Analysis New Course -- -- -- -- 12/15/2007 CBA/note/descript -- -- -- -- 12/15/2007 ENG ENGR 300 Principles of Nuclear Engineering New Course -- -- -- -- 12/15/2007 ENG ENGR

Farritor, Shane

450

Requests are subject to edit upon entering into SIS+ ACTIVITY LOG  

E-Print Network (OSTI)

Energy Systems Remove Course -- -- -- 4/15/08 ENG AREN 420/820 Lighting II: Theory, Design/15/08 ENG ENGR 410 Radiation Protection and Shielding New Course -- -- -- 4/15/08 ENG ENGR 420 Nuclear Reactor Engineering New Course -- -- -- 4/15/08 ASC MATH 203J Contemporary Math New Course -- -- -- 4

Farritor, Shane

451

Acoustic analogues of black hole singularities  

SciTech Connect

We search for acoustic analogues of a spherical symmetric black hole with a pointlike source. We show that the gravitational system has a dynamical counterpart in the constrained, steady motion of a fluid with a planar source. The equations governing the dynamics of the gravitational system can be exactly mapped in those governing the motion of the fluid. The different meaning that singularities and sources have in fluid dynamics and in general relativity is also discussed. Whereas in the latter a pointlike source is always associated with a (curvature) singularity in the former the presence of sources does not necessarily imply divergences of the fields.

Cadoni, Mariano; Mignemi, Salvatore [Dipartimento di Fisica, Universita di Cagliari, and INFN, Sezione di Cagliari, Cittadella Universitaria 09042 Monserrato (Italy); Dipartimento di Matematica, Universita di Cagliari, viale Merello 92, 09123 Cagliari, Italy, and INFN, Sezione di Cagliari (Italy)

2005-10-15T23:59:59.000Z

452

Acoustic analogues of black hole singularities  

E-Print Network (OSTI)

We search for acoustic analogues of a spherical symmetric black hole with a pointlike source. We show that the gravitational system has a dynamical counterpart in the constrained, steady motion of a fluid with a planar source. The equations governing the dynamics of the gravitational system can be exactly mapped in those governing the motion of the fluid. The different meaning that singularities and sources have in fluid dynamics and in general relativity is also discussed. Whereas in the latter a pointlike source is always associated with a (curvature) singularity in the former the presence of sources does not necessarily imply divergences of the fields.

Mariano Cadoni; Salvatore Mignemi

2005-04-29T23:59:59.000Z

453

Underwater Acoustic Sensor Networks: Research Challenges  

E-Print Network (OSTI)

Underwater sensor nodes will find applications in oceanographic data collection, pollution monitoring, o#shore exploration, disaster prevention, assisted navigation and tactical surveillance applications. Moreover, unmanned or autonomous underwater vehicles (UUVs, AUVs), equipped with sensors, will enable the exploration of natural undersea resources and gathering of scientific data in collaborative monitoring missions. Underwater acoustic networking is the enabling technology for these applications. Underwater networks consist of a variable number of sensors and vehicles that are deployed to perform collaborative monitoring tasks over a given area.

Ian Akyildiz Dario; Ian F. Akyildiz; Dario Pompili; Tommaso Melodia

2005-01-01T23:59:59.000Z

454

Underwater Acoustic Sensor Networks: Research Challenges  

E-Print Network (OSTI)

Underwater sensor nodes will find applications in oceanographic data collection, pollution monitoring, o#shore exploration, disaster prevention, assisted navigation and tactical surveillance applications. Moreover, unmanned or autonomous underwater vehicles (UUVs, AUVs), equipped with sensors, will enable the exploration of natural undersea resources and gathering of scientific data in collaborative monitoring missions. Underwater acoustic networking is the enabling technology for these applications. Underwater networks consist of a variable number of sensors and vehicles that are deployed to perform collaborative monitoring tasks over a given area. In this

Ian F. Akyildiz; Dario Pompili; Tommaso Melodia

2005-01-01T23:59:59.000Z

455

Energy flow in acoustic black holes  

SciTech Connect

We present the results of an analysis of superradiant energy flow due to scalar fields incident on an acoustic black hole. In addition to providing independent confirmation of the recent results in [E. Berti, V. Cardoso, and J. P. S. Lemos, Phys. Rev. D 70, 124006 (2004).], we determine in detail the profile of energy flow everywhere outside the horizon. We confirm explicitly that in a suitable frame the energy flow is inward at the horizon and outward at infinity, as expected on physical grounds.

Choy, K.; Kruk, T.; Carrington, M.E.; Fugleberg, T.; Zahn, J.; Kobes, R.; Kunstatter, G.; Pickering, D. [Department of Physics, Brandon University, Brandon, Manitoba, R7A 6A9 (Canada) and Winnipeg Institute for Theoretical Physics, Winnipeg, Manitoba (Canada); Department of Physics, University of Winnipeg, Winnipeg, Manitoba, R7A 6A9 (Canada) and Winnipeg Institute for Theoretical Physics, Winnipeg, Manitoba (Canada); Department of Mathematics, Brandon University, Brandon, Manitoba, R7A 6A9 (Canada)

2006-05-15T23:59:59.000Z

456

Tomographic Maps of the Ocean Mesoscale. Part 1: Pure Acoustics  

Science Conference Proceedings (OSTI)

A field test of ocean acoustic tomography was conducted in 1981 for a two month period in a 300 km square at 26N, 70W in the North Atlantic (just south of the MODE region). Nine acoustic deep-sea moorings with sea floor transponders for ...

B. Cornuelle; C. Wunsch; D. Behringer; T. Birdsall; M. Brown; R. Heinmiller; R. Knox; K. Metzger; W. Munk; J. Spiesberger; R. Spindel; D. Webb; P. Worcester

1985-02-01T23:59:59.000Z

457

Focused beam routing protocol for underwater acoustic networks  

Science Conference Proceedings (OSTI)

Multi-hop transmission is considered for large coverage areas in bandwidth-limited underwater acoustic networks. In this paper, we present a scalable routing technique based on location information, and optimized for minimum energy per bit consumption. ... Keywords: power control, routing, underwater acoustic networks

Josep Miquel Jornet; Milica Stojanovic; Michele Zorzi

2008-09-01T23:59:59.000Z

458

Acoustic detection of partial discharges in insulation oil  

Science Conference Proceedings (OSTI)

In this paper, we performed an insulation diagnosis technique for oil-immersed power transformers by an acoustic detection method. Electrode system such as needle to plane electrode was fabricated to simulate a defect of power transformers. In addition, ... Keywords: acoustic detection, frequency component, insulation diagnostic, partial discharge, positioning

Dae-Won Park; Sang-Wook Cha; Gyung-Suk Kil

2011-03-01T23:59:59.000Z

459

Intelligent acoustic rotor speed estimation for an autonomous helicopter  

Science Conference Proceedings (OSTI)

Acoustic sensing to gather information about a machine can be highly beneficial, but processing the data can be difficult. In this work, a variety of methodologies have been studied to extract rotor speed information from the sound signature of an autonomous ... Keywords: Acoustic sensing, Adaptive network-based fuzzy inference system, Artificial neural network, Feature selection, Genetic algorithm, Helicopter, Rotor speeds

Benjamin N. Passow; Mario A. Gongora; Adrian A. Hopgood; Sophy Smith

2012-11-01T23:59:59.000Z

460

Acoustical Measurement of Current and Vorticity beneath Ice  

Science Conference Proceedings (OSTI)

An acoustical instrument has been developed to measure path-averaged horizontal current and vorticity in the subice boundary layer of the eastern Arctic during the spring of 1989. A triangular acoustic array of side 200 m was used to obtain ...

Dimitris Menemenlis; David M. Farmer

1992-12-01T23:59:59.000Z

Note: This page contains sample records for the topic "activity acoustic logs" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Fast LMS/Newton algorithms for stereophonic acoustic echo cancelation  

Science Conference Proceedings (OSTI)

This paper presents a new class of adaptive filtering algorithms to solve the stereophonic acoustic echo cancelation (AEC) problem in teleconferencing systems. While stereophonic AEC may be seen as a simple generalization of the well-known single-channel ... Keywords: LMS/Newton, adaptive filters, lattice orthogonalization, stereo acoustic echo cancellation (AEC)

Harsha I. K. Rao; Behrouz Farhang-Boroujeny

2009-08-01T23:59:59.000Z

462

Resonant acoustic transducer system for a well drilling string  

DOE Patents (OSTI)

For use in transmitting acoustic waves propated along a well drilling string, a piezoelectric transducer is provided operating in the relatively low loss acoustic propagation range of the well drilling string. The efficiently coupled transmitting transducer incorporates a mass-spring-piezoelectric transmitter combination permitting a resonant operation in the desired low frequency range.

Nardi, Anthony P. (Burlington, MA)

1981-01-01T23:59:59.000Z

463

Resonant acoustic transducer system for a well drilling string  

DOE Patents (OSTI)

For use in transmitting acoustic waves propagated along a well drilling string, a piezoelectric transducer is provided operating in the relatively low loss acoustic propagation range of the well drilling string. The efficiently coupled transmitting transducer incorporates a mass-spring-piezoelectric transmitter combination permitting resonant operation in the desired low frequency range.

Kent, William H. (Westford, MA); Mitchell, Peter G. (Concord, MA)

1981-01-01T23:59:59.000Z

464

activities  

NLE Websites -- All DOE Office Websites (Extended Search)

Detecting Things We Cannot See: Learning the Concepts of Control and Detecting Things We Cannot See: Learning the Concepts of Control and Variable in an Experiment Submitted by Anita Brook-Dupree, 1996 TRAC teacher at Fermilab, Teacher, Alternative Middle Years School, Philadelphia, PA. Particle physicists at Fermilab in Batavia, Illinois are faced with the problem of detecting the presence of sub-atomic particles they cannot see. During my summer as a TRAC teacher at Fermilab, I tried to think of ways to teach middle school students about things we cannot see. I want to thank my nine-year-old daughter Gia for the idea for the following activity. I was lamenting that I could not come up with ideas of how to relate the work of Fermilab scientists to anything that my students would understand. Then I was reminded by my daughter, that when I brought her to school on the

465

Borehole-Wall Imaging with Acoustic and Optical Televiewers for  

Open Energy Info (EERE)

Borehole-Wall Imaging with Acoustic and Optical Televiewers for Borehole-Wall Imaging with Acoustic and Optical Televiewers for Fractured-Bedrock Aquifer Investigations Jump to: navigation, search OpenEI Reference LibraryAdd to library Conference Paper: Borehole-Wall Imaging with Acoustic and Optical Televiewers for Fractured-Bedrock Aquifer Investigations Abstract Imaging with acoustic and optical televiewers results in continuous and oriented 360 degree views of the borehole wall from which the character and orientation of lithologic and structural features can be defined for fractured-bedrock aquifer investigations. Fractures are more clearly defined under a wider range of conditions on acoustic images than on optical images including dark-colored rocks, cloudy borehole water, and coated borehole walls. However, optical images allow for the direct viewing

466

Acoustic-velocity measurements in materials using a regenerative method  

DOE Patents (OSTI)

Acoustic energy is propatated through earth material between an electro-acoustic generator and a receiver which converts the received acoustic energy into electrical signals. A closed loop is formed by a variable gain amplifier system connected between the receiver and the generator. The gain of the amplifier system is increased until sustained oscillations are produced in the closed loop. The frequency of the oscillations is measured as an indication of the acoustic propagation velocity through the earth material. The amplifier gain is measured as an indication of the acoustic attenuation through the earth materials. The method is also applicable to the non-destructive testing of structural materials, such as steel, aluminum and concrete.

Laine, E.F.

1982-09-30T23:59:59.000Z

467

Acoustic velocity measurements in materials using a regenerative method  

DOE Patents (OSTI)

Acoustic energy is propagated through earth material between an electro-acoustic generator and a receiver which converts the received acoustic energy into electrical signals. A closed loop is formed by a variable gain amplifier system connected between the receiver and the generator. The gain of the amplifier system is increased until sustained oscillations are produced in the closed loop. The frequency of the oscillations is measured as an indication of the acoustic propagation velocity through the earth material. The amplifier gain is measured as an indication of the acoustic attenuation through the earth materials. The method is also applicable to the non-destructive testing of structural materials, such as steel, aluminum and concrete.

Laine, Edwin F. (Alamo, CA)

1986-01-01T23:59:59.000Z

468

Building Energy Software Tools Directory: AcousticCalc  

NLE Websites -- All DOE Office Websites (Extended Search)

AcousticCalc AcousticCalc Developed over the last decade, AcousticCalc helps designers predict sound levels at the room level from a distant sound source. The program uses the ASHRAE Handbook and ASHRAE's 1991 Algorithms for HVAC Acoustics handbook methods with the "Source-Path-Receiver" model. This easy-to-use Windows-based program allows a user to define and save unlimited number of sound sources, save and define unlimited number of sound "paths" (composed of long list of possible duct component types) and model the ceiling effect and three different models for room effect. AcousticCalc allows a user to import and export (share) sound sources, user-defined devices, terminal units, and duct silencers with other users. Easy-to-navigate "tree" modeling allows an unlimited number of sound

469

Estimation of Dry-Rock Elastic Moduli Based on the Simulation of Mud-Filtrate Invasion Effects on Borehole Acoustic Logs  

E-Print Network (OSTI)

.3 Stratigraphic column of the Rulison Field area. The tight gas sand reservoirs are within the late Cretaceous.S. and production is to increase by 50% in 2020 (Fletcher, 2005). Unconventional gas, such as tight gas sand for improving gas recovery from tight gas sands are needed. The Reservoir Characterization Project (RCP

Torres-Verdín, Carlos

470

An Overview of Recent Logging Research at The University of Texas Petroleum Engineering Department  

SciTech Connect

Logging research at The University of Texas has been carried out in several areas. We have studied how rock resistivity varies with water saturation when other variables, such as rock wettability, stress, saturation history, and shale content are varied. Both experimental and theoretical work have been done. Rock wettability (oil or water wet) has by far the largest effect. Shale content and saturation history are also important. Rock stress is the least important, at least in the Berea sandstones and glass bed packs we have studied. We have published several papers and theses which describe this work in detail. We have also studied the effect of certain trace elements (boron, mainly) on the neutron log. Boron has a very high thermal neutron capture cross Section. Analyses of a number of Frio formation cores from the Texas Gulf Coast area show that boron occurs frequently in these rocks in amounts (up to 100 ppm or more) that would seriously affect several procedures in neutron log interpretation. It could, for example, reduce or even eliminate the neutron log--density log porosity reversal that is commonly used as a gas indicator. A recent paper reports details of our work in the Frio. We are currently extending our trace element studies to the West Texas area. The lower porosities occurring there make a given boron content in the rock even more important than in the higher porosity Gulf Coast area. Another effort has been the application of logging data to obtain better estimates of rock type, and inferentially, rock permeability. The work is semi-empirical, and results are usually limited in application geographically. These results can be very important, however; for example, when extrapolating core data to parts of a field where no cores were taken. Several papers have reported details of this work, which is continuing. Finally, we have advised the Department of Energy on logging programs and problems in the Geothermal-Geopressured research effort. In the early phases of the work we studied why water resistivities calculated from the self potential log were so often wrong. and showed that most of the error came from use of incorrect mud filtrate resistivities in the calculation. Several papers and theses give details of this research. A recent problem has been the estimation of free gas saturation in a deep, thick, geopressured sand in the Hulin Well in South Louisiana. A pulsed neutron log run recently in this well supports free gas indications from open hole resistivity logs run in this well earlier by Superior Oil Company. The presence of free gas here is important, since the gas/water ratio from this zone will be much larger if free gas is present. Future logging research under consideration or being started at The University of Texas includes (1) petrophysical problems in tight gas sands (bimodal porosity systems, trace element effects, etc.), (2) resistivity versus water saturation relations at high desaturation pressures (1500 psi), and (3) improved theoretical and computer modeling of rock resistivity as affected by water saturation, rock wettability, saturation history, etc. Support of logging research at The University of Texas is currently from the Department of Energy and from a consortium of companies and organizations (Gas Research Institute, logging companies, and oil companies).

Dunlap, H.F.

1989-03-21T23:59:59.000Z

471

Active vibration reduction applied to the compressor of an air?conditioning unit for trams  

Science Conference Proceedings (OSTI)

Within the framework of the European Integrated Project InMAR (intelligent materials for active noise reduction)active vibration control and active structural acoustic control approaches are applied to an HVAC (heating

Joachim Bs; Enrico Janssen; Michael Kauba; Dirk Mayer

2008-01-01T23:59:59.000Z

472

Characterization of the Germania Spraberry unit from analog studies and cased-hole neutron log data  

E-Print Network (OSTI)

The need for characterization of the Germania unit has emerged as a first step in the review, understanding and enhancement of the production practices applicable within the unit and the trend area in general. Petrophysical characterization of the Germania Spraberry units requires a unique approach for a number of reasons ?? limited core data, lack of modern log data and absence of directed studies within the unit. In the absence of the afore mentioned resources, an approach that will rely heavily on previous petrophysical work carried out in the neighboring ET O??Daniel unit (6.2 miles away), and normalization of the old log data prior to conventional interpretation techniques will be used. A log-based rock model has been able to guide successfully the prediction of pay and non-pay intervals within the ET O??Daniel unit, and will be useful if found applicable within the Germania unit. A novel multiple regression technique utilizing non-parametric transformations to achieve better correlations in predicting a dependent variable (permeability) from multiple independent variables (rock type, shale volume and porosity) will also be investigated in this study. A log data base includes digitized formats of gamma ray, cased hole neutron, limited resistivity and neutron/density/sonic porosity logs over a considerable wide area.

Olumide, Babajide Adelekan

2004-08-01T23:59:59.000Z

473

Benefit/cost analysis for research in geothermal log interpretation. Final report  

DOE Green Energy (OSTI)

Well log interpretation, the process of inferring subsurface geology from geophysical measurements made in boreholes, is the most versatile and direct means available of assessing important physical and structural reservoir properties. Historically, well logging has been developed primarily for use in oil and gas wells, and its application in a different environment such as a geothermal reservoir creates complex problems. Present geothermal development is severely hindered by lack of data. Adaptation of well logging techniques holds the promise of reducing development costs, encouraging investment, and assisting regulatory permitting. Such benefits will translate directly into lower power costs and an increased domestic energy supply. A significant acceleration of geothermal power-on-line is possible plus cost reductions through reduction of drilling failure rate, reduction of average well cost, earlier recognition of bad wells, reduced flow testing, and savings due to provision of better data for regulatory decisions. Net undiscounted benefits in 1979 dollars from improving logging and interpretation in geothermal areas can exceed half a billion dollars in slightly more than a decade, about 300 million of this should be regarded as the potential benefit of the Los Alamos Scientific Laboratory Geothermal Log Interpretation Program or similar research.

Rigby, F.A.; Reardon, P.

1979-07-01T23:59:59.000Z

474

In-home demonstration of the reduction of woodstove emissions from the use of densified logs  

DOE Green Energy (OSTI)

There is a need to reduce emissions from conventional wood stoves in the short-term while stove replacement takes place over the longer term. One possible is to use fuels that would burn cleaner than cordwood. Densified fuels have been commercially available for years and offer such a possibility. The objective of this project was to evaluate the emissions and efficiency performance of two commercially available densified log types in homes and compare their performance with cordwood. Researchers measured particulate matter (PM), carbon monoxide (CO), and volatile organic matter (VOC) emissions. Both total VOC and methane values are presented. Each home used an Automated Woodstove Emissions Sampler system, developed for the EPA and Bonneville Power Administration, in a series of four week-long tests for each stove. The sequence of tests in each stove was cordwood, Pres-to-Logs, Eco-Logs, and a second, confirming test using Pres-to-Logs. Results show an average reduction of 52% in PM grams per hour emissions overall for the nine stoves using Pres-to-Logs. All nine stoves displayed a reduction in PM emissions. CO emissions were more modestly reduced by 27%, and VOCs were reduced 39%. The emissions reduction percentage was similar for both types of stoves.

Barnett, S.G.; Bighouse, R.D.

1992-07-07T23:59:59.000Z

475

In-Home Demonstration of the Reduction of Woodstove Emissions from the Use of Densified Logs.  

DOE Green Energy (OSTI)

There is a need to reduce emissions from conventional wood stoves in the short-term while stove replacement takes place over the longer term. One possible is to use fuels that would burn cleaner than cordwood. Densified fuels have been commercially available for years and offer such a possibility. The objective of this project was to evaluate the emissions and efficiency performance of two commercially available densified log types in homes and compare their performance with cordwood. Researchers measured particulate matter (PM), carbon monoxide (CO), and volatile organic matter (VOC) emissions. Both total VOC and methane values are presented. Each home used an Automated Woodstove Emissions Sampler system, developed for the EPA and Bonneville Power Administration, in a series of four week-long tests for each stove. The sequence of tests in each stove was cordwood, Pres-to-Logs, Eco-Logs, and a second, confirming test using Pres-to-Logs. Results show an average reduction of 52% in PM grams per hour emissions overall for the nine stoves using Pres-to-Logs. All nine stoves displayed a reduction in PM emissions. CO emissions were more modestly reduced by 27%, and VOCs were reduced 39%. The emissions reduction percentage was similar for both types of stoves.

Barnett, Stockton G.; Bidhouse, Roger D.

1992-07-07T23:59:59.000Z

476

Topical report on subsurface fracture mapping from geothermal wellbores. Phase I. Pulsed radar techniques. Phase II. Conventional logging methods. Phase III. Magnetic borehole ranging  

DOE Green Energy (OSTI)

To advance the state-of-the-art in Hot Dry Rock technology, an evaluation is made of (i) the use of radar to map far-field fractures, (ii) the use of more than twenty different conventional well logging tools to map borehole-fracture intercepts, and (iii) the use of magnetic dipole ranging to determine the relative positions of the injection well and the production well within the fractured zone. It is found that according to calculations, VHF backscatter radar has the potential for mapping fractures within a distance of 50 +- 20 meters from the wellbore. A new technique for improving fracture identification is presented. Analyses of extant data indicate that when used synergistically the (1) caliper, (2) resistivity dipmeter, (3) televiewer, (4) television, (5) impression packer, and (6) acoustic transmission are useful for mapping borehole-fracture intercepts. Improvements in both data interpretation techniques and high temperature operation are required. The surveying of one borehole from another appears feasible at ranges of up to 200 to 500 meters by using a low frequency magnetic field generated by a moderately strong dipole source (a solenoid) located in one borehole, a sensitive B field detector that traverses part of the second borehole, narrow band filtering, and special data inversion techniques.

Hartenbaum, B.A.; Rawson, G.

1980-09-01T23:59:59.000Z

477

Droplet Combustion and Non-Reactive Shear-Coaxial Jets with Transverse Acoustic Excitation  

E-Print Network (OSTI)

Related Works in Droplet Combustion . . . . . . . .of Acoustics on Droplet Combustion . . . . . . . . . . . .Fuel Droplet Combustion . . . . . . . . . . . . . . .

Teshome, Sophonias

2012-01-01T23:59:59.000Z

478

Passive acoustic fetal heart rate monitoring with a parallel redundance approach  

Science Conference Proceedings (OSTI)

Acoustic methods for monitoring fetal heart rate are potentially advantageous over ultrasound methods

Stephen A. Zahorian; Zongyao Zhou; Charles Brewton

1995-01-01T23:59:59.000Z

479

A Numerical Study on the Enhancement of Heat Transfer by Pressure Distributions in Acoustic Fields  

Science Conference Proceedings (OSTI)

The enhancement of heat transfer in a cavity was investigated in the absence of and in the presence of acoustic streaming induced by ultrasonic waves. The present study provides the experimental and numerical results of heat transfer in the acoustic ... Keywords: Acoustic pressure, Acoustic streaming, Coupled FE-BEM, Particle imaging velocimetry (PIV), Ultrasonic wave

Y. K. Oh; H. D. Yang

2005-01-01T23:59:59.000Z

480

An Aquatic Acoustic Metrics Interface Utility for Underwater Sound Monitoring and Analysis  

SciTech Connect

Fishes and other marine mammals suffer a range of potential effects from intense sound sources generated by anthropogenic underwater processes such as pile driving, shipping, sonars, and underwater blasting. Several underwater sound recording devices (USR) were built to monitor the acoustic sound pressure waves generated by those anthropogenic underwater activities, so the relevant processing software becomes indispensable for analyzing the audio files recorded by these USRs. However, existing software packages did not meet performance and flexibility requirements. In this paper, we provide a detailed description of a new software package, named Aquatic Acoustic Metrics Interface (AAMI), which is a Graphical User Interface (GUI) designed for underwater sound monitoring and analysis. In addition to the general functions, such as loading and editing audio files recorded by USRs, the software can compute a series of acoustic metrics in physical units, monitor the sound's influence on fish hearing according to audiograms from different species of fishes and marine mammals, and batch process the sound files. The detailed applications of the software AAMI will be discussed along with several test case scenarios to illustrate its functionality.

Ren, Huiying; Halvorsen, Michele B.; Deng, Zhiqun; Carlson, Thomas J.

2012-05-31T23:59:59.000Z

Note: This page contains sample records for the topic "activity acoustic logs" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Acoustic Emission and Guided Wave Monitoring of Fatigue Crack Growth on a Full Pipe Specimen  

Science Conference Proceedings (OSTI)

Continuous on-line monitoring of active and passive systems, structures and components in nuclear power plants will be critical to extending the lifetimes of nuclear power plants in the US beyond 60 years. Acoustic emission and guided ultrasonic waves are two tools for continuously monitoring passive systems, structures and components within nuclear power plants and are the focus of this study. These tools are used to monitor fatigue damage induced in a SA 312 TP304 stainless steel pipe specimen. The results of acoustic emission monitoring indicate that crack propagation signals were not directly detected. However, acoustic emission monitoring exposed crack formation prior to visual confirmation through the detection of signals caused by crack closure friction. The results of guided ultrasonic wave monitoring indicate that this technology is sensitive to the presence and size of cracks. The sensitivity and complexity of GUW signals is observed to vary with respect to signal frequency and path traveled by the guided ultrasonic wave relative to the crack orientation.

Meyer, Ryan M.; Cumblidge, Stephen E.; Ramuhalli, Pradeep; Watson, Bruce E.; Doctor, Steven R.; Bond, Leonard J.

2011-05-06T23:59:59.000Z

482

Design and Instrumentation of a Measurement and Calibration System for an Acoustic Telemetry System  

Science Conference Proceedings (OSTI)

The Juvenile Salmon Acoustic Telemetry System (JSATS) is an active sensing technology developed by Portland District, the U.S. Army Corps of Engineers for detecting and tracking small fish. It is used at hydroelectric projects and in the laboratory for evaluating behavior and survival of juvenile salmonids migrating through the Federal Columbia River Power System to the Pacific Ocean. It provides critical data for salmon protection and development of more fish-friendly hydroelectric facilities. The objective of this study was to design and build a measurement and calibration system for evaluating the JSATS component, because the JSATS requires comprehensive acceptance and performance testing in a controlled environment before it is deployed in the field. The system consists of a reference transducer, a water test tank lined with anechoic material, a motion control unit, a reference receiver, a signal conditioner and amplifier unit, a data acquisition board, MATLAB control and analysis interface, and a computer. The fully integrated system has been evaluated successfully at various simulated distances and using different encoded signals at frequencies within the bandwidth of the JSATS transmitter. It provides accurate acoustic mapping capability in a controlled environment and automates the process that allows real-time measurements and evaluation of the piezoelectric transducers, sensors, or the acoustic fields. The measurement and calibration system has been in use since 2009 for acceptance and performance testing of, and further improvements to, the JSATS.

Deng, Zhiqun; Weiland, Mark A.; Carlson, Thomas J.; Eppard, M. B.

2010-03-31T23:59:59.000Z

483

Acoustic monitoring method and system in laser-induced optical breakdown (LIOB)  

DOE Patents (OSTI)

An acoustic monitoring method and system in laser-induced optical breakdown (LIOB) provides information which characterize material which is broken down, microbubbles in the material, and/or the microenvironment of the microbubbles. In one embodiment of the invention, femtosecond laser pulses are focused just inside the surface of a volume of aqueous solution which may include dendrimer nanocomposite (DNC) particles. A tightly focused, high frequency, single-element ultrasonic transducer is positioned such that its focus coincides axially and laterally with this laser focus. When optical breakdown occurs, a microbubble forms and a shock or pressure wave is emitted (i.e., acoustic emission). In addition to this acoustic signal, the microbubble may be actively probed with pulse-echo measurements from the same transducer. After the microbubble forms, received pulse-echo signals have an extra pulse, describing the microbubble location and providing a measure of axial microbubble size. Wavefield plots of successive recordings illustrate the generation, growth, and collapse of microbubbles due to optical breakdown. These same plots can also be used to quantify LIOB thresholds.

O' Donnell, Matthew (Ann Arbor, MI); Ye, Jing Yong (Ann Arbor, MI); Norris, Theodore B. (Dexter, MI); Baker, Jr., James R. (Ann Arbor, MI); Balogh, Lajos P. (Ann Arbor, MI); Milas, Susanne M. (Ann Arbor, MI); Emelianov, Stanislav Y. (Ann Arbor, MI); Hollman, Kyle W. (Fenton, MI)

2008-05-06T23:59:59.000Z

484

Creating digital life stories through activity recognition with image filtering  

Science Conference Proceedings (OSTI)

This paper presents two algorithms that enables the MemoryLane system to support persons with mild dementia through creation of digital life stories. The MemoryLane system consists of a Logging Kit that captures context and image data, and a Review Client ... Keywords: activity recognition, image filtering, life logging, life story, memory assistance

Basel Kikhia; Johan E. Bengtsson; Kre Synnes; Zaheer ul Hussain Sani; Josef Hallberg

2010-06-01T23:59:59.000Z

485

Feasibility investigation and design study of optical well logging methods for high temperature geothermal wells  

DOE Green Energy (OSTI)

The objective of this project was exploration of a novel approach to high temperature well logging, based on a system of optical transducers and an optical transmission line both theoretically capable of operation to at least 600/sup 0/C. The scope of the work involved the accomplishment of ten specific tasks. These had as their objective the determination of feasibility, and identification of major problem areas, in the implementation of continuous temperature logging of geothermal wells using optical techniques. The following tasks are reported: literature review and data compilation, measurement of fiber properties production fiber procurement, investigation of methods of fiber termination, cable design and fabrication, and sensor and system studies. (MHR)

Swanson, R.K.; Anderson, R.E.; Ash, J.I.; Beissner, R.E.; Smith, V.D.

1978-03-01T23:59:59.000Z

486

Acoustic sand detector for fluid flowstreams  

DOE Patents (OSTI)

The particle volume and particle mass production rate of particulate solids entrained in fluid flowstreams such as formation sand or fracture proppant entrained in oil and gas production flowstreams is determined by a system having a metal probe interposed in a flow conduit for transmitting acoustic emissions created by particles impacting the probe to a sensor and signal processing circuit which produces discrete signals related to the impact of each of the particles striking the probe. The volume or mass flow rate of particulates is determined from making an initial particle size distribution and particle energy distribution and comparing the initial energy distribution and/or the initial size distribution with values related to the impact energies of a predetermined number of recorded impacts. The comparison is also used to recalibrate the system to compensate for changes in flow velocity.

Beattie, Alan G. (Corrales, NM); Bohon, W. Mark (Frisco, TX)

1993-01-01T23:59:59.000Z

487

Raising Photoemission Efficiency with Surface Acoustic Waves  

Science Conference Proceedings (OSTI)

We are developing a novel technique that may help increase the efficiency and reduce costs of photoelectron sources used at electron accelerators. The technique is based on the use of Surface Acoustic Waves (SAW) in piezoelectric materials, such as GaAs, that are commonly used as photocathodes. Piezoelectric fields produced by the traveling SAW spatially separate electrons and holes, reducing their probability of recombination, thereby enhancing the photoemission quantum efficiency of the photocathode. Additional advantages could be increased polarization provided by the enhanced mobility of charge carriers that can be controlled by the SAW and the ionization of optically-generated excitons resulting in the creation of additional electron-hole pairs. It is expected that these novel features will reduce the cost of accelerator operation. A theoretical model for photoemission in the presence of SAW has been developed, and experimental tests of the technique are underway.

A. Afanasev, F. Hassani, C.E. Korman, V.G. Dudnikov, R.P. Johnson, M. Poelker, K.E.L. Surles-Law

2012-07-01T23:59:59.000Z

488

Optimization of Concurrent Deployments of the Juvenile Salmon Acoustic Telemetry System and Other Hydroacoustic Equipment at John Day Dam  

DOE Green Energy (OSTI)

The purpose of this report is to document the results of the acoustic optimization study conducted at John Day Dam during January and February 2008. The goal of the study was to optimize performance of the Juvenile Salmon Acoustic Telemetry System (JSATS) by determining deployment and data acquisition methods to minimize electrical and acoustic interference from various other acoustic sampling devices. Thereby, this would allow concurrent sampling by active and passive acoustic methods during the formal evaluations of the prototype surface flow outlets at the dam during spring and summer outmigration seasons for juvenile salmonids. The objectives for the optimization study at John Day Dam were to: 1. Design and test prototypes and provide a total needs list of pipes and trolleys to deploy JSATS hydrophones on the forebay face of the powerhouse and spillway. 2. Assess the effect on mean percentage decoded of JSATS transmissions from tags arrayed in the forebay and detected on the hydrophones by comparing: turbine unit OFF vs. ON; spill bay OPEN vs. CLOSED; dual frequency identification sonar (DIDSON) and acoustic Doppler current profiler (ADCP) both OFF vs. ON at a spill bay; and, fixed-aspect hydroacoustic system OFF vs. ON at a turbine unit and a spill bay. 3. Determine the relationship between fixed-aspect hydroacoustic transmit level and mean percentage of JSATS transmissions decoded. The general approach was to use hydrophones to listen for transmissions from JSATS tags deployed in vertical arrays in a series perpendicular to the face of the dam. We used acoustic telemetry equipment manufactured by Technologic and Sonic Concepts. In addition, we assessed old and new JSATS signal detectors and decoders and two different types of hydrophone baffling. The optimization study consisted of a suite of off/on tests. The primary response variable was mean percentage of tag transmissions decoded. We found that there was no appreciable adverse effect on mean percentage decoded for JSATS transmitters from: turbine operations; spillway operations; DIDSON/ADCP acoustic energy; and PAS hydroacoustic systems at transmit level of -12 dB, although there was a significant impact at all higher transmit levels (-11 to -6 dB). The main conclusion from this optimization study is that valid JSATS telemetry data can be collected simultaneously with a DIDSON/ADCP and a PAS hydroacoustic system at transmit level -12 dB. Multiple evaluation tools should be considered to increase the robustness and thoroughness of future fish passage evaluations at John Day and other dams.

Ploskey, Gene R.; Hughes, James S.; Khan, Fenton; Kim, Jina; Lamarche, Brian L.; Johnson, Gary E.; Choi, Eric Y.; Faber, Derrek M.; Wilberding, Matthew C.; Deng, Zhiqun; Weiland, Mark A.; Zimmerman, Shon A.; Fischer, Eric S.; Cushing, Aaron W.

2008-09-01T23:59:59.000Z

489

Coal log pipeline research at the University of Missouri. 4th Quarterly report, October 1, 1993--December 31, 1993  

SciTech Connect

This paper is a progress report on a research project aimed at the development of coal log technology. Efforts have been directed at the development of technology for the fabrication of stable coal logs, as well as the energy efficient transport of these logs, in particular by pipelines. Work has been directed at new types of binders, new fabrication presses, the application of polymers to reduce transport losses, and modeling efforts.

Liu, H.

1994-05-01T23:59:59.000Z

490

Property:ThermalInfo | Open Energy Information  

Open Energy Info (EERE)

Property Property Edit with form History Facebook icon Twitter icon » Property:ThermalInfo Jump to: navigation, search Property Name ThermalInfo Property Type Text Subproperties This property has the following 93 subproperties: A Acoustic Logs Active Seismic Methods Active Sensors Aeromagnetic Survey Airborne Electromagnetic Survey Analytical Modeling C Caliper Log Cation Geothermometers Cement Bond Log Conceptual Model Controlled Source Frequency-Domain Magnetics Cross-Dipole Acoustic Log Cuttings Analysis D Data Acquisition-Manipulation Data Collection and Mapping Data Techniques Data and Modeling Techniques Density Log Direct-Current Resistivity Survey Drilling Methods E Earth Tidal Analysis Electric Micro Imager Log Electromagnetic Sounding Methods Elemental Analysis with Fluid Inclusion

491

Comprehensive study of LASL Well C/T-2 Roosevelt Hot Springs KGRA, Utah, and applications to geothermal well logging  

DOE Green Energy (OSTI)

Utah State Geothermal Well 9-1 in the Roosevelt Hot Springs KGRA, Beaver County, Utah, has been donated by Phillips Petroleum Company for calibration and testing of well-logg