Powered by Deep Web Technologies
Note: This page contains sample records for the topic "achieving eu targets" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Beam On Target! - CEBAF Accelerator Achieves 12 GeV Commissioning...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Beam On Target CEBAF Accelerator Achieves 12 GeV Commissioning Milestone The accelerator crew on hand The accelerator crew on hand for the beam-on-target achievement included...

2

achieving abuja targets: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

POLICIES FOR ACHIEVING ENERGY JUSTICE IN SOCIETY: BEST PRACTICES FOR APPLYING SOLAR ENERGY) Project Center for Energy and Environmental Policy University of Delaware First...

3

Potential for meeting the EU new passenger car CO? emissions targets  

E-Print Network [OSTI]

In 2009, the European Parliament agreed to limit the CO2 emissions from new passenger cars sold in the European Union to an average of 130g/km by 2015. Further, a probable longer-term CO2 emissions target of 95g/km is ...

Bhatt, Kandarp

2011-01-01T23:59:59.000Z

4

The only way to achieve low carbon emission targets is to substantially reduce the energy used in buildings.  

E-Print Network [OSTI]

11 KTA@Bath Challenge The only way to achieve low carbon emission targets is to substantially research and lead the education of highly skilled low carbon designers. These Centres will have strong

Burton, Geoffrey R.

5

Trade-offs of different land and bioenergy policies on the path to achieving climate targets.  

SciTech Connect (OSTI)

Many papers have shown that bioenergy and land-use are potentially important elements in a strategy to limit anthropogenic climate change. But, significant expansion of bioenergy production can have a large terrestrial footprint. In this paper, we test the implications for land use, the global energy system, carbon cycle, and carbon prices of meeting a specific climate target, using a single fossil fuel and industrial sector policy instrument—the carbon tax, but with five alternative bioenergy and land-use policy architectures. We find that the policies we examined have differing effects on the different segments of the economy. Comprehensive land policies can reduce land-use change emissions, increasing allowable emissions in the energy system, but have implications for the cost of food. Bioenergy taxes and constraints, on the other hand, have little effect on food prices, but can result in increased carbon and energy prices.

Calvin, Katherine V.; Wise, Marshall A.; Kyle, G. Page; Patel, Pralit L.; Clarke, Leon E.; Edmonds, James A.

2014-04-16T23:59:59.000Z

6

Carbon Prices during the EU ETS Phase II: Dynamics and Volume Analysis  

E-Print Network [OSTI]

Université Paris Dauphine Abstract The European Union Emissions Trading Scheme (EU ETS) is the largest emissions trading scheme to date. This article summarizes the principle elements behind the trading system of reducing CO2 emissions and achieving the Kyoto Protocol target. The European Union Emissions Trading Scheme

Boyer, Edmond

7

Achieving California’s Land Use and Transportation Greenhouse Gas Emission Targets Under AB 32: An Exploration of Potential Policy Processes and Mechanisms  

E-Print Network [OSTI]

Schleich (2006). EU Emissions Trading: an Early Analysis of2002). Comparing Emission Trading with Absolute and Relativein the European Emissions Trading System: a Commentary.

Shaheen, Susan A.; Bejamin-Chung, Jade; Allen, Denise; Howe-Steiger, Linda

2009-01-01T23:59:59.000Z

8

NREL 2012 Achievement of Ethanol Cost Targets: Biochemical Ethanol Fermentation via Dilute-Acid Pretreatment and Enzymatic Hydrolysis of Corn Stover  

SciTech Connect (OSTI)

For the DOE Bioenergy Technologies Office, the annual State of Technology (SOT) assessment is an essential activity for quantifying the benefits of biochemical platform research. This assessment has historically allowed the impact of research progress achieved through targeted Bioenergy Technologies Office funding to be quantified in terms of economic improvements within the context of a fully integrated cellulosic ethanol production process. As such, progress toward the ultimate 2012 goal of demonstrating cost-competitive cellulosic ethanol technology can be tracked. With an assumed feedstock cost for corn stover of $58.50/ton this target has historically been set at $1.41/gal ethanol for conversion costs only (exclusive of feedstock) and $2.15/gal total production cost (inclusive of feedstock) or minimum ethanol selling price (MESP). This year, fully integrated cellulosic ethanol production data generated by National Renewable Energy Laboratory (NREL) researchers in their Integrated Biorefinery Research Facility (IBRF) successfully demonstrated performance commensurate with both the FY 2012 SOT MESP target of $2.15/gal (2007$, $58.50/ton feedstock cost) and the conversion target of $1.41/gal through core research and process improvements in pretreatment, enzymatic hydrolysis, and fermentation.

Tao, L.; Schell, D.; Davis, R.; Tan, E.; Elander, R.; Bratis, A.

2014-04-01T23:59:59.000Z

9

A New Combustion Synthesis Method for GaN:Eu3+ and Ga2O3 :Eu3+  

E-Print Network [OSTI]

A New Combustion Synthesis Method for GaN:Eu3+ and Ga2O3 :Eu3+ Luminescent Powders G. A. Hirata1 between the precursors. The preparation of Eu-doped Ga2O3 powders was achieved using a new combustion)3 and Ga(NO3)3 as the precursors and hydrazine as (non-carbonaceous) fuel. A spontaneous combustion

McKittrick, Joanna

10

NREL 2012 Achievement of Ethanol Cost Targets: Biochemical Ethanol Fermentation via Dilute-Acid Pretreatment and Enzymatic Hydrolysis of Corn Stover  

Office of Scientific and Technical Information (OSTI)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary)morphinan antagonist Journal Article: CrystalFG36-08GO18149 Revision: - Date: 06/15/10 ABENGOANREL 2012 Achievement

11

Call for expression of interest EU-Brazil Technology and Innovation Forum  

E-Print Network [OSTI]

for Brazilian SMEs, Technological Parks and other innovation actors for cooperation with Europe (Tour of BrazilCall for expression of interest EU-Brazil Technology and Innovation Forum Participation to B2B targeting research and innovation actors. Among them, this year the EU-Brazil Technology and Innovation

12

Achievements, Awards  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc Documentation RUCProductstwrmrAre the Effects ofAboutTestAccountingTiO (110):Achievements,

13

Polarized internal target apparatus  

DOE Patents [OSTI]

A polarized internal target apparatus with a polarized gas target of improved polarization and density achieved by mixing target gas atoms with a small amount of alkali metal gas atoms, and passing a high intensity polarized light source into the mixture to cause the alkali metal gas atoms to become polarized which interact in spin exchange collisions with target gas atoms yielding polarized target gas atoms.

Holt, Roy J. (Downers Grove, IL)

1986-01-01T23:59:59.000Z

14

Polarized internal target apparatus  

DOE Patents [OSTI]

A polarized internal target apparatus with a polarized gas target of improved polarization and density (achieved by mixing target gas atoms with a small amount of alkali metal gas atoms, and passing a high intensity polarized light source into the mixture to cause the alkali metal gas atoms to become polarized which interact in spin exchange collisions with target gas atoms yielding polarized target gas atoms) is described.

Holt, R.J.

1984-10-10T23:59:59.000Z

15

Sandia National Laboratories: EU PVS  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 -the Mid-Infrared0EnergySandiaConsortium for AdvancedEnergy Storage StudyEU PVS

16

Magnetically attached sputter targets  

DOE Patents [OSTI]

An improved method and assembly for attaching sputtering targets to cathode assemblies of sputtering systems which includes a magnetically permeable material is described. The magnetically permeable material is imbedded in a target base that is brazed, welded, or soldered to the sputter target, or is mechanically retained in the target material. Target attachment to the cathode is achieved by virtue of the permanent magnets and/or the pole pieces in the cathode assembly that create magnetic flux lines adjacent to the backing plate, which strongly attract the magnetically permeable material in the target assembly. 11 figures.

Makowiecki, D.M.; McKernan, M.A.

1994-02-15T23:59:59.000Z

17

Eu(III) Complexes of Octadentate 1-Hydroxy-2-pyridinones: Stability and Improved Photophysical Performance  

SciTech Connect (OSTI)

The luminescence properties of lanthanoid ions can be dramatically enhanced by coupling them to antenna ligands that absorb light in the UV-visible and then efficiently transfer the energy to the lanthanoid centre. The synthesis and the complexation of Ln{sup III} cations (Ln = Eu, Gd) for a ligand based on four 1-hydroxy-2-pyridinone (1,2-HOPO) chelators appended to a ligand backbone derived by linking two L-lysine units (3LI-bis-LYS) is described. This octadentate Eu{sup III} complex ([Eu(3LI-bis-LYS-1,2-HOPO)]{sup -}) has been evaluated in terms of its thermodynamic stability, UV-visible absorption and luminescence properties. For this complex, the conditional stability constant (pM) is 19.9, which is an order of magnitude higher than diethylenetriaminepentacetic acid at pH = 7.4. This Eu{sup III} complex also shows an almost two-fold increase in its luminescence quantum yield in aqueous solution (pH = 7.4) when compared with other octadentate ligands. Hence, despite a slight decrease of the molar absorption coefficient, a much higher brightness is obtained for [Eu(3LI-bis-LYS-1,2-HOPO)]{sup -}. This overall improvement was achieved by saturating the coordination sphere of the Eu{sup III} cation, yielding an increased metal-centred efficiency by excluding solvent water molecules from the metal's inner sphere.

Moore, Evan G.; D'Aleo, Anthony; Xu, Jide; Raymond, Kenneth N.

2009-05-29T23:59:59.000Z

18

Management of waste electrical and electronic equipment in two EU countries: A comparison  

SciTech Connect (OSTI)

Highlights: Black-Right-Pointing-Pointer Review on data regarding WEEE management in Italy and in Romania. Black-Right-Pointing-Pointer Problems that countries that will enter in the EU will have to solve facing with the WEEE management. Black-Right-Pointing-Pointer Pilot experiences useful for the awareness campaign of the population. - Abstract: The paper presents some data regarding waste electrical and electronic (WEEE) management in one of the founding countries of the EU, Italy, and in a recent entry into the EU, Romania. The aim of this research was to analyze some problems that countries entering the EU will have to solve with respect to WEEE management. The experiences of Italy and Romania could provide an interesting reference point. The strengths and weaknesses that the two EU countries have encountered can be used in order to give a more rational plan for other countries. In Italy the increase of WEEE collection was achieved in parallel with the increase of the efficiency of selective Municipal Solid Waste collection. In Romania, pilot experiences were useful to increase the awareness of the population. The different interests of the two populations towards recyclable waste led to a different scenario: in Romania all types of WEEE have been collected since its entrance into the EU; in Italy the 'interest' in recycling is typically related to large household appliances, with a secondary role of lighting equipment.

Torretta, Vincenzo, E-mail: vincenzo.torretta@uninsubria.it [Department of Science and High Technology, Insubria University of Varese, Via G.B. Vico 46, I-21100 Varese (Italy); Ragazzi, Marco [Department of Civil and Environmental Engineering, University of Trento, Via Mesiano 77, I-38123 Trento (Italy); Istrate, Irina Aura [Department of Energy Production and Use, Politehnica University of Bucharest, Splaiul Independentei 313, 060042 Bucharest (Romania); Rada, Elena Cristina [Department of Civil and Environmental Engineering, University of Trento, Via Mesiano 77, I-38123 Trento (Italy)

2013-01-15T23:59:59.000Z

19

De-Carbonizing California and the EU  

E-Print Network [OSTI]

biofuel Yearly vehicle tax Bio fuel car subsidy EU specific200) subsidy when purchasing a bio fuel car Emission tradingincreasing electric use and bio-fuels . The total fuel use

Berck, Peter; Brannlund, Runar

2008-01-01T23:59:59.000Z

20

Reduction of Eu{sup 3+} to Eu{sup 2+} in aluminoborosilicate glasses under ionizing radiation  

SciTech Connect (OSTI)

Eu{sub 2}O{sub 3}-doped aluminoborosilicate glasses were prepared by melting in air at high temperature ({approx}1500 {sup o}C). It was shown by luminescence and Electron Paramagnetic Resonance (EPR) measurements that both Eu{sup 3+} and Eu{sup 2+} ions can exist simultaneously in the glass matrix studied after glass synthesis as well as after exposure to ionizing radiation. Increase of total Eu{sub 2}O{sub 3} concentration leads to the increase of Eu{sup 3+} luminescence intensity while the luminescence intensity of Eu{sup 2+} ions tends to decrease. In contrast the EPR indicates that the amount of Eu{sup 2+} ions in the glass increases with total Eu{sub 2}O{sub 3} concentration. The difference in the results of the two spectroscopies is explained in terms of energy transfer from Eu{sup 2+} to Eu{sup 3+} leading to an Eu{sup 2+} luminescence quenching. Irradiation results in the increase of reduced Eu{sup 2+} quantity detected by EPR measurements. It was shown that Eu{sup 2+} ions are located in both high (g {approx} 4.6) and low symmetry ('U' spectrum) sites in the structure of aluminoborosilicate glasses. The increase of Eu{sup 2+} content by the increase of the irradiation dose manifests the strong reduction process Eu{sup 3+} {yields} Eu{sup 2+}.

Malchukova, E., E-mail: genia@poly.polytechnique.fr [Laboratoire des Solides Irradies, UMR 7642 CEA-CNRS-Ecole Polytechnique, 91128 Palaiseau Cedex (France); Boizot, B. [Laboratoire des Solides Irradies, UMR 7642 CEA-CNRS-Ecole Polytechnique, 91128 Palaiseau Cedex (France)] [Laboratoire des Solides Irradies, UMR 7642 CEA-CNRS-Ecole Polytechnique, 91128 Palaiseau Cedex (France)

2010-09-15T23:59:59.000Z

Note: This page contains sample records for the topic "achieving eu targets" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Facebook and its EU users Applicability of the EU data protection law  

E-Print Network [OSTI]

Facebook and its EU users ­ Applicability of the EU data protection law to US based SNS* Aleksandra (SNS). The analysis will be conducted on the example of Facebook, which is one of the most popular SNS. The goal of the paper is to examine whether European users of Facebook can rely on their national data

Boyer, Edmond

22

Social Actors in the Implementation of EU Agri-Environmental Policy  

E-Print Network [OSTI]

of EU Agri- Environmental Policy Eduardo Moyano Institute ofof EU Agri- Environmental Policy Eduardo Moyano and Fernandoof EU Agri-Environmental Policy”. Unfortunately, neither

Moyano, Eduardo

2005-01-01T23:59:59.000Z

23

Universitt Wien European Studies Vienna Romania's Way into the EU  

E-Print Network [OSTI]

1 Universität Wien European Studies Vienna Romania's Way into the EU Author: Liana Müller Supervisor: Prof. Dr. Peter Fischer Index terms Romania, European Union, Enlargement, Accession, Acquis............................................................................. 8 3 EU ­ Romania relations

Müller, Ralf R.

24

augu eu degvielu: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

fusion process is used from waste phosphors. 1. Introduction The recycling of rare earths is of importance for helping for recycling Eu from BaMgAl10O17:Eu2+ (BMA)...

25

EU Verbraucherrechte Apple One-Year Limited  

E-Print Network [OSTI]

EU Verbraucherrechte Apple One-Year Limited Warranty AppleCare Protection Plan CC Service Pack, Kabel. Zusätzlich bei allen Macs: 1x Time Capsule oder 1x Airport Gerät sowie 1x Apple Display Macs u sowie 1x Apple Display Material- u. Herstellungsfehler. Keine Leistung für Verschlei�teile wie Akku

Fiebig, Peter

26

BUILDING MOMENTUM ACHIEVING EXCELLENCE  

E-Print Network [OSTI]

BUILDING MOMENTUM ACHIEVING EXCELLENCE AnnuAlRepoRtofDonoRs July 1, 2013 ­ June 30, 2014 #12;the '82 Douglas R. Cliggott '78 Lecturer UMass Amherst Jeanette Cole^ Associate Chair & Director UMass Amherst David J. Der Hagopian '72 (Retired) CEO Ravago Holdings Americare George R. Ditomassi Jr. '57, '96

Mountziaris, T. J.

27

POLICIES FOR ACHIEVING ENERGY  

E-Print Network [OSTI]

POLICIES FOR ACHIEVING ENERGY JUSTICE IN SOCIETY: BEST PRACTICES FOR APPLYING SOLAR ENERGY) Project Center for Energy and Environmental Policy University of Delaware First Publication in July 2010 FOR APPLYING SOLAR ENERGY TECHNOLOGIES TO LOW-INCOME HOUSING Final Report A Renewable Energy Applications

Delaware, University of

28

strategic directions achievement"  

E-Print Network [OSTI]

jacaranda tree that graces the University of Sydney Quadrangle was planted in the 1920s. It has become inspired by achievement.......... 2 University structure and organisation.... 3 Research and innovation of existing practice - constructive but confronting. We seek sustainable economic development, and this means

Viglas, Anastasios

29

Achieving Sustainability Cindy Carlsson  

E-Print Network [OSTI]

Achieving Sustainability at MnDOT Cindy Carlsson MnDOT Office of Policy Analysis, Research and Innovation 22nd Annual Transportation Research Conference May 24, 2011 #12;Sustainable practices respect Sustainability #12;Environmental Sustainability Sustainable practices · Are compatible with and may enhance

Minnesota, University of

30

Achieving Sustainability Cindy Carlsson  

E-Print Network [OSTI]

Achieving Sustainability Cindy Carlsson Mn/DOT Office of Policy Analysis, Research and Innovation April 21, 2011 #12;Sustainability Is Not New Mn/DOT has long been a leader in CSS and environmental excellence. . . . . . so we're well along on the path to sustainability! #12;Today Sustainability is More

Minnesota, University of

31

This study explores how the EU Emissions Trading System (EU ETS) actually works on the ground affecting corporate climate strategies.  

E-Print Network [OSTI]

This study explores how the EU Emissions Trading System (EU ETS) actually works on the ground@bookpoint.co.uk May 2013 322 pages Hardback 978-1-4094-6078-7 £60.00 Corporate Responses to EU Emissions Trading at The Fridtjof Nansen Institute, Norway `With greenhouse gas emissions trading schemes emerging worldwide

32

NREL 2012 Achievement of Ethanol Cost Targets: Biochemical Ethanol...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

biorefinery decreased from -0.03 to -1.2 kg CO 2e gal ethanol, while fossil energy demand decreased from 0.85 to -13.66 MJgal ethanol (design case versus 2012 SOT case,...

33

Project ACHIEVE final report  

SciTech Connect (OSTI)

Project ACHIEVE was a math/science academic enhancement program aimed at first year high school Hispanic American students. Four high schools -- two in El Paso, Texas and two in Bakersfield, California -- participated in this Department of Energy-funded program during the spring and summer of 1996. Over 50 students, many of whom felt they were facing a nightmare future, were given the opportunity to work closely with personal computers and software, sophisticated calculators, and computer-based laboratories -- an experience which their regular academic curriculum did not provide. Math and science projects, exercises, and experiments were completed that emphasized independent and creative applications of scientific and mathematical theories to real world problems. The most important outcome was the exposure Project ACHIEVE provided to students concerning the college and technical-field career possibilities available to them.

NONE

1997-06-13T23:59:59.000Z

34

Evidence of Eu{sup 2+} 4f electrons in the valence band spectra of EuTiO{sub 3} and EuZrO{sub 3}  

SciTech Connect (OSTI)

We report on optical band gap and valence electronic structure of two Eu{sup 2+}-based perovskites, EuTiO{sub 3} and EuZrO{sub 3} as revealed by diffuse optical scattering, electron energy loss spectroscopy, and valence-band x-ray photoelectron spectroscopy. The data show good agreement with the first-principles studies in which the top of the valence band structure is formed by the narrow Eu 4f{sup 7} electron band. The O 2p band shows the features similar to those of the Ba(Sr)TiO{sub 3} perovskites except that it is shifted to higher binding energies. Appearance of the Eu{sup 2+} 4f{sup 7} band is a reason for narrowing of the optical band gap in the title compounds as compared to their Sr-based analogues.

Kolodiazhnyi, T. [National Institute for Materials Science, 1-1 Namiki, Tsukuba, Ibaraki 305-0044 (Japan); Valant, M. [Materials Research Laboratory, University of Nova Gorica, Vipavska 13, 5000 Nova Gorica (Slovenia); Williams, J. R. [International Center for Young Scientists (ICYS), MANA, National Institute for Materials Science, 1-1 Namiki, Tsukuba, Ibaraki 305-0044 (Japan); Bugnet, M.; Botton, G. A. [Department of Materials Science and Engineering, McMaster University, Hamilton, Ontario L8S 4L7 (Canada); Ohashi, N. [International Center for Materials Nanoarchitectonics, MANA, National Institute for Materials Science, 1-1 Namiki, Tsukuba, Ibaraki 305-0044 (Japan); Sakka, Y. [National Institute for Materials Science, 1-2-1 Sengen, Tsukuba, Ibaraki 305-0047 (Japan)

2012-10-15T23:59:59.000Z

35

Targets for Neutrino Factories and Muon Colliders %%%%%%%%%%%%%%%&'())0  

E-Print Network [OSTI]

t is less than target radius r divided by speed of sound vsound, beam-induced pressure waves (thermal shock P (= force/area) given by P = E r r = EU C , where E is the modulus of elasticity. Kirk T. Mc

McDonald, Kirk

36

Targets for Neutrino Factories and Muon Colliders ( ( ( ( ( ( ( ( ( ( ( ( ( (()1032546487  

E-Print Network [OSTI]

t is less than target radius r divided by speed of sound vsound, beam-induced pressure waves (thermal shock P (= force/area) given by P = E r r = EU C , where E is the modulus of elasticity. Kirk T. Mc

McDonald, Kirk

37

Promoting electricity from renewable energy sources -- lessons learned from the EU, U.S. and Japan  

E-Print Network [OSTI]

fluctuations. Electricity generation [TWh/year] EU-25 USA4 . Electricity generation [TWh/year] Japan EU-25 USA EU-25USA Japan Wind Waste Solar Biomass Geothermal Figure 2 Historical pattern of electricity

Haas, Reinhard

2008-01-01T23:59:59.000Z

38

Analysis of alpha-induced reactions on $^{151}$Eu below the Coulomb barrier  

E-Print Network [OSTI]

Novel measurements of $(\\alpha,\\gamma)$ and $(\\alpha$,n) reaction cross sections on the target nucleus $^{151}$Eu, close to the reaction thresholds, support the setting up of recent parameters of the $\\alpha$-particle optical model potential below the Coulomb barrier. A better understanding of the $\\alpha$-particle optical potential at these energies leads to a statistical model analysis of additional partial cross sections that were formerly measured but not considered within the model analysis. On this basis we have tentatively assigned a modified $J^{\\pi}$=9$^-$ spin and parity to the 22.7-h isomer in $^{154}$Tb.

V. Avrigeanu; M. Avrigeanu

2010-12-05T23:59:59.000Z

39

Investing in the EU Benelux as a Gateway  

E-Print Network [OSTI]

property law - Starting points - The Intellectual Property types · Protection (registration analysis International investment financing and Project finance 3 1 · Introduction: Origin, definition, whyInvesting in the EU Benelux as a Gateway Postgraduate Programme #12;Programme: Investing in the EU

Einmahl, Uwe

40

What (Economic) Constitution Does the EU Need ? Janvier 2007  

E-Print Network [OSTI]

What (Economic) Constitution Does the EU Need ? N° 2007-04 Janvier 2007 Eloi Laurent OFCE-FNSP eloi2014 #12;2 What (Economic) Constitution Does the EU Need? * �loi Laurent (OFCE/FNSP)1 Jacques Le in this debate by identifying what is essentially wrong with the economic provisions of the EUT, which we

Boyer, Edmond

Note: This page contains sample records for the topic "achieving eu targets" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Research Summary The EU Emissions Trading System: Opportunities for Forests?  

E-Print Network [OSTI]

is currently the world's largest carbon market. It does not cover carbon sequestration by forests at present. Although the EU ETS does not currently cover forestry carbon sequestration and there is no indication. o Consider potential opportunities associated with the EU ETS and carbon sequestration that may

42

Low temperature synthesis and photoluminescent properties of CaMoO{sub 4}:Eu{sup 3+} red phosphor with uniform micro-assemblies  

SciTech Connect (OSTI)

Highlights: {yields} Synthesis of Eu{sup 3+}-doped CaMoO{sub 4} red phosphor via a facile hydrothermal method. {yields} The morphology of the materials was manipulated using different alkaline sources. {yields} Micro-structures were assembled by small nanostructures. {yields} Luminescent investigations confirmed that the Eu{sup 3+} ions have been effectively doped into the nanostructures. {yields} Schematic diagram for the energy transfer clearly reveals the photoluminescent mechanism. -- Abstract: Scheelite-type Eu{sup 3+}-doped CaMoO{sub 4} red phosphor with uniform micro-assemblies has been successfully synthesized via a facile hydrothermal method at 120 {sup o}C for 10 h. The Eu{sup 3+}-doped CaMoO{sub 4} microstructures were assembled by small nanostructures and the morphology of materials was found to be manipulated by dropping different alkalis into the stock solution for the first time. The structure, morphology, and luminescent property were characterized and investigated by techniques of X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), and photoluminescence (PL). The luminescent investigations confirmed that the Eu{sup 3+} ions have been effectively doped into CaMoO{sub 4} nanostructures. The successfully achieved Eu{sup 3+}-doped CaMoO{sub 4} nanostructures will be potential in technological applications on near UV chip-based white light emitting diode (WLED).

Yu, Fangyi [Hefei National Laboratory for Physical Sciences at the Microscale, University of Science and Technology of China, Hefei, Anhui 230026 (China) [Hefei National Laboratory for Physical Sciences at the Microscale, University of Science and Technology of China, Hefei, Anhui 230026 (China); Department of Chemistry, University of Science and Technology of China, Hefei, Anhui 230026 (China); Zuo, Jian, E-mail: zuoj@ustc.edu.cn [Hefei National Laboratory for Physical Sciences at the Microscale, University of Science and Technology of China, Hefei, Anhui 230026 (China)] [Hefei National Laboratory for Physical Sciences at the Microscale, University of Science and Technology of China, Hefei, Anhui 230026 (China); Zhao, Zhi [Hefei National Laboratory for Physical Sciences at the Microscale, University of Science and Technology of China, Hefei, Anhui 230026 (China)] [Hefei National Laboratory for Physical Sciences at the Microscale, University of Science and Technology of China, Hefei, Anhui 230026 (China); Jiang, Chengying [Department of Physics, University of Science and Technology of China, Hefei, Anhui 230026 (China)] [Department of Physics, University of Science and Technology of China, Hefei, Anhui 230026 (China); Yang, Qing, E-mail: qyoung@ustc.edu.cn [Hefei National Laboratory for Physical Sciences at the Microscale, University of Science and Technology of China, Hefei, Anhui 230026 (China) [Hefei National Laboratory for Physical Sciences at the Microscale, University of Science and Technology of China, Hefei, Anhui 230026 (China); Department of Chemistry, University of Science and Technology of China, Hefei, Anhui 230026 (China)

2011-09-15T23:59:59.000Z

43

VEHICLE NETWORKS: ACHIEVING REGULAR FORMATION  

E-Print Network [OSTI]

VEHICLE NETWORKS: ACHIEVING REGULAR FORMATION MADALENA CHAVES, ROBERT DAY, LUCIA GOMEZ a network of vehicles exchanging information among themselves with the intention of achieving a specified the performance of the vehicle network. A stochastic model for information flow is also considered, allowing

44

Stringency and distribution in the EU ETS: first evidence 41 CLIMATE POLICY  

E-Print Network [OSTI]

Stringency and distribution in the EU Emissions Trading Scheme: first evidence CLAUDIA KETTNER1,2 , ANGELA covered by the EU Emissions Trading Scheme (EU ETS) were compared. Based on data available for 24 Member: climate policy; emissions trading; EU Emissions Trading Scheme A partir des émissions vérifiées pour les

Steininger, Karl W.

45

Plug-in electric vehicle introduction in the EU  

E-Print Network [OSTI]

Plug-in electric vehicles (PEVs) could significantly reduce gasoline consumption and greenhouse gas (GHG) emissions in the EU's transport sector. However, PEV well-towheel (WTW) emissions depend on improvements in vehicle ...

Sisternes, Fernando J. de $q (Fernando José Sisternes Jiménez)

2010-01-01T23:59:59.000Z

46

Accelerator target  

DOE Patents [OSTI]

A target includes a body having a depression in a front side for holding a sample for irradiation by a particle beam to produce a radioisotope. Cooling fins are disposed on a backside of the body opposite the depression. A foil is joined to the body front side to cover the depression and sample therein. A perforate grid is joined to the body atop the foil for supporting the foil and for transmitting the particle beam therethrough. A coolant is circulated over the fins to cool the body during the particle beam irradiation of the sample in the depression. 5 figs.

Schlyer, D.J.; Ferrieri, R.A.; Koehler, C.

1999-06-29T23:59:59.000Z

47

Accelerator target  

DOE Patents [OSTI]

A target includes a body having a depression in a front side for holding a sample for irradiation by a particle beam to produce a radioisotope. Cooling fins are disposed on a backside of the body opposite the depression. A foil is joined to the body front side to cover the depression and sample therein. A perforate grid is joined to the body atop the foil for supporting the foil and for transmitting the particle beam therethrough. A coolant is circulated over the fins to cool the body during the particle beam irradiation of the sample in the depression.

Schlyer, David J. (Bellport, NY); Ferrieri, Richard A. (Patchogue, NY); Koehler, Conrad (Miller Place, NY)

1999-01-01T23:59:59.000Z

48

Industrial Scale Demonstration of Smart Manufacturing Achieving...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Scale Demonstration of Smart Manufacturing Achieving Transformational Energy Productivity Gains Industrial Scale Demonstration of Smart Manufacturing Achieving...

49

4/6/2014 EU Drafts Hydraulic Fracturing Guidelines to Mitigate Conflicting Laws | The DailyEnergyReport http://www.dailyenergyreport.com/eu-drafts-hydraulic-fracturing-guidelines-to-mitigate-conflicting-laws-2/ 1/7  

E-Print Network [OSTI]

4/6/2014 EU Drafts Hydraulic Fracturing Guidelines to Mitigate Conflicting Laws | The DailyEnergyReport http://www.dailyenergyreport.com/eu-drafts-hydraulic-fracturing Transportation Generation Finance Government Attend Watch EU Drafts Hydraulic Fracturing Guidelines to Mitigate

Chiao, Jung-Chih

50

Manufacturing industry challenges and responses to EU, California, and other product-targeted environmental regulations  

E-Print Network [OSTI]

overnight. In both Electronics and Automotive (as well assuch as electronics, aerospace, automotive, etc. ), resultselectronics industry body consult with its counterparts in the automotive

Kirschner, Michael

2008-01-01T23:59:59.000Z

51

Target Allocation Methodology for China's Provinces: Energy Intensity in the 12th FIve-Year Plan  

SciTech Connect (OSTI)

Experience with China's 20% energy intensity improvement target during the 11th Five-Year Plan (FYP) (2006-2010) has shown the challenges of rapidly setting targets and implementing measures to meet them. For the 12th FYP (2011-2015), there is an urgent need for a more scientific methodology to allocate targets among the provinces and to track physical and economic indicators of energy and carbon saving progress. This report provides a sectoral methodology for allocating a national energy intensity target - expressed as percent change in energy per unit gross domestic product (GDP) - among China's provinces in the 12th FYP. Drawing on international experience - especially the European Union (EU) Triptych approach for allocating Kyoto carbon targets among EU member states - the methodology here makes important modifications to the EU approach to address an energy intensity rather than a CO{sub 2} emissions target, and for the wider variation in provincial energy and economic structure in China. The methodology combines top-down national target projections and bottom-up provincial and sectoral projections of energy and GDP to determine target allocation of energy intensity targets. Total primary energy consumption is separated into three end-use sectors - industrial, residential, and other energy. Sectoral indicators are used to differentiate the potential for energy saving among the provinces. This sectoral methodology is utilized to allocate provincial-level targets for a national target of 20% energy intensity improvement during the 12th FYP; the official target is determined by the National Development and Reform Commission. Energy and GDP projections used in the allocations were compared with other models, and several allocation scenarios were run to test sensitivity. The resulting allocations for the 12th FYP offer insight on past performance and offer somewhat different distributions of provincial targets compared to the 11th FYP. Recommendations for reporting and monitoring progress on the targets, and methodology improvements, are included.

Ohshita, Stephanie; Price, Lynn

2011-03-21T23:59:59.000Z

52

EU Framework 6 Project: Predictive Toxicology (PredTox)-overview and outcome  

SciTech Connect (OSTI)

In this publication, we report the outcome of the integrated EU Framework 6 Project: Predictive Toxicology (PredTox), including methodological aspects and overall conclusions. Specific details including data analysis and interpretation are reported in separate articles in this issue. The project, partly funded by the EU, was carried out by a consortium of 15 pharmaceutical companies, 2 SMEs, and 3 universities. The effects of 16 test compounds were characterized using conventional toxicological parameters and 'omics' technologies. The three major observed toxicities, liver hypertrophy, bile duct necrosis and/or cholestasis, and kidney proximal tubular damage were analyzed in detail. The combined approach of 'omics' and conventional toxicology proved a useful tool for mechanistic investigations and the identification of putative biomarkers. In our hands and in combination with histopathological assessment, target organ transcriptomics was the most prolific approach for the generation of mechanistic hypotheses. Proteomics approaches were relatively time-consuming and required careful standardization. NMR-based metabolomics detected metabolite changes accompanying histopathological findings, providing limited additional mechanistic information. Conversely, targeted metabolite profiling with LC/GC-MS was very useful for the investigation of bile duct necrosis/cholestasis. In general, both proteomics and metabolomics were supportive of other findings. Thus, the outcome of this program indicates that 'omics' technologies can help toxicologists to make better informed decisions during exploratory toxicological studies. The data support that hypothesis on mode of action and discovery of putative biomarkers are tangible outcomes of integrated 'omics' analysis. Qualification of biomarkers remains challenging, in particular in terms of identification, mechanistic anchoring, appropriate specificity, and sensitivity.

Suter, Laura, E-mail: Laura.suter-dick@roche.com [Hoffmann-La Roche AG, Basel (Switzerland); Schroeder, Susanne [Nycomed GmbH, Barsbuettel (Germany); Meyer, Kirstin [Bayer Schering Pharma AG, Berlin (Germany); Gautier, Jean-Charles [Sanofi aventis R and D, Disposition, Safety and Animal Research, Vitry sur Seine (France); Amberg, Alexander [Sanofi aventis R and D, Disposition, Safety and Animal Research, Frankfurt (Germany); Wendt, Maria; Gmuender, Hans [Genedata AG, Basel (Switzerland); Mally, Angela [University of Wuerzburg, Institut fuer Toxikologie, Wuerzburg (Germany); Boitier, Eric [Sanofi aventis R and D, Disposition, Safety and Animal Research, Vitry sur Seine (France); Ellinger-Ziegelbauer, Heidrun [Bayer Schering Pharma AG, Wuppertal (Germany); Matheis, Katja [Boehringer Ingelheim Pharma GmbH and Co. KG, Biberach (Germany); Pfannkuch, Friedlieb [Hoffmann-La Roche AG, Basel (Switzerland)

2011-04-15T23:59:59.000Z

53

ANNUAL TRILATERAL U.S. - EU - JAPAN CONFERENCE ON CRITICAL MATERIALS...  

Office of Environmental Management (EM)

ANNUAL TRILATERAL U.S. - EU - JAPAN CONFERENCE ON CRITICAL MATERIALS FOR A CLEAN ENERGY FUTURE, SEPTEMBER 8-9, 2014 ANNUAL TRILATERAL U.S. - EU - JAPAN CONFERENCE ON CRITICAL...

54

EU, CHINA AND THE ENVIRONMENTAL CHALLENGE IN AFRICA A case study from timber industry in Gabon  

E-Print Network [OSTI]

severe concerns about the environmental impact of such activities. This paper will therefore analyze1 EU, CHINA AND THE ENVIRONMENTAL CHALLENGE IN AFRICA A case study from timber industry: .....................................................................................................................................................2 Part I: The EU, China and the external environmental dimension

55

The EU ETS: CO2 prices drivers during the learning experience (2005-2007)  

E-Print Network [OSTI]

Union Allowances (EUAs), valid for compliance under the European Union Emissions Trading Scheme (EU ETS of the European Union Emissions Trading Scheme (EU ETS) is to regulate CO2 emissions from the most energy

Paris-Sud XI, Université de

56

The Political Economy of Agri-Environmental Policies in the EU  

E-Print Network [OSTI]

Economy of Agri-Environmental Policies in the EU JohanEconomy of Agri-Environmental Policies in the EU Johan F.M.changes” Agri-environmental policies are only fraction of

Swinnen, Johan

2005-01-01T23:59:59.000Z

57

How EU Agri-Environmental Policy Might Have Differed Under Various WTO Scenarios  

E-Print Network [OSTI]

No. 12 How EU Agri-Environmental Policy Might Have DifferedEconomy of Agri-environmental Policies in the U.S. and the2005 How EU agri-environmental policy might have differed

Swinbank, Alan

2005-01-01T23:59:59.000Z

58

Past and Future EU Water Policy from a German Perspective  

E-Print Network [OSTI]

/271/EEC concerning urban waste-water treatment -> most expensive EEC-directive ever, but also veryPast and Future EU Water Policy from a German Perspective Dr. Fritz Holzwarth #12;Water Protection Community (EEC) with the focus on economic issues (reduction of trade barriers, free movement of goods

Wehrli, Bernhard

59

Investing in the EU Benelux as a Gateway  

E-Print Network [OSTI]

law - Starting points - The Intellectual Property types · Protection (registration) at the national Investing in the EU: Environmental aspects 3 1 · Introduction to Belgian regional environmental law International investment financing and Project finance 3 1 · Introduction: Origin, definition, why choose

Einmahl, Uwe

60

EU Enlargement and industrial relocation within the CEECs Matthieu Crozet  

E-Print Network [OSTI]

of economic activity in a country. The problematic lies in the context of the EU enlargement process and of its impact on the location of economic activity inside each of the accessing countries. We develop a new economic geography model based on the original Krugman (1991) model, and show that trade

Paris-Sud XI, Université de

Note: This page contains sample records for the topic "achieving eu targets" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Copyright reform on the EU level European Network for Copyright in support of  

E-Print Network [OSTI]

Copyright reform on the EU level European Network for Copyright in support of Education and Budapest Business School #12;Copyright reform on the EU level What can science and education expect from a copyright reform on the EU level? Rainer Kuhlen University of Konstanz, HumboldtUniversity Berlin, IPR

Kuhlen, Rainer

62

EU BIOFUEL USE AND AGRICULTURAL COMMODITY PRICES: A REVIEW OF THE EVIDENCE BASE  

E-Print Network [OSTI]

EU BIOFUEL USE AND AGRICULTURAL COMMODITY PRICES: A REVIEW OF THE EVIDENCE BASE Report prepared: Kretschmer, B, Bowyer, C and Buckwell, A (2012) EU Biofuel Use and Agricultural Commodity Prices: A Review............................................................................................................. 8 2 EU POLICY DRIVING BIOFUELS DEMAND AND OUTLOOK FOR THIS DEMAND TO 2020. 9 2.1 What is the current

63

Sorption of Eu(III) on Attapulgite Studied by Batch, XPS and EXAFS Techniques  

E-Print Network [OSTI]

, the sorption of Eu(III) at the solid-water interface is important for the performance assessment of nuclear and absence of fulvic acid (FA) and humic acid (HA). The results indicated that the sorption of Eu. The extended X-ray absorption fine structure (EXAFS) analysis of Eu-HA complexes indicated that the distances

Boyer, Edmond

64

MERCOSUR-European Union Trade: How Important is EU Trade Liberalisation for MERCOSUR's  

E-Print Network [OSTI]

MERCOSUR-European Union Trade: How Important is EU Trade Liberalisation for MERCOSUR's Exports: + 34 - 964 - 72 86 16 1 #12;MERCOSUR-European Union Trade: How Important is EU Trade Liberalisation's exports' growth potential in a liberalised EU market. A sectoral study is considered indispensable since

Krivobokova, Tatyana

65

Carbon Leakage in the Primary Aluminium Sector: What evidence after 6 years of the EU ETS?  

E-Print Network [OSTI]

of the European Union Emissions Trading Scheme (EU ETS). The findings suggest that while rising electricity prices. Keywords: carbon leakage, European Union Emissions Trading Scheme (EU ETS), CO2 pricing 1 1 #12;32 2 1 - Introduction Since the European Union Emissions Trading Scheme (EU ETS) began pricing CO2 emissions within

Paris-Sud XI, Université de

66

Superheavy Elements - Achievements and Challenges  

SciTech Connect (OSTI)

The search for superheavy elements (SHE) has yielded exciting results for both the 'cold fusion' approach with reactions employing Pb and Bi targets and the ''hot fusion'' reactions with {sup 48}Ca beams on actinide targets. The most recent activities at GSI were the successful production of a more neutron rich isotope of element 112 in the reaction {sup 48}Ca+{sup 238}U confirming earlier result from FLNR, and the attempt to synthesize an isotope with Z 120 in the reaction {sup 64}Ni+{sup 238}U. Apart from the synthesis of new elements, advanced nuclear structure studies for heavy and super heavy elements promise a detailed insight in the properties of nuclear matter under the extreme conditions of high Z and A. The means are evaporation residue(ER)-{alpha}-{alpha} and -{alpha}-{gamma} coincidence techniques applied after separation of the reaction products from the beam. Recent examples of interesting physics to be discovered in this region of the chart of nuclides are the investigation of K-isomers observed for {sup 252,254}No and indicated for {sup 270}Ds. Fast chemistry and precision mass measurements deliver in addition valuable information on the fundamental properties of the SHE.

Ackermann, Dieter [GSI Helmholtzzentrum fuer Schwerionenforschung GmbH, Planckstr. 1, D-64291 Darmstadt (Germany)

2009-03-04T23:59:59.000Z

67

EuCARD 2010 Accelerator Technology in Europe  

E-Print Network [OSTI]

Accelerators are basic tools of the experimental physics of elementary particles, nuclear physics, light sources of the fourth generation. They are also used in myriad other applications in research, industry and medicine. For example, there are intensely developed transmutation techniques for nuclear waste from nuclear power and atomic industries. The European Union invests in the development of accelerator infrastructures inside the framework programs to build the European Research Area. The aim is to build new infrastructure, develop the existing, and generally make the infrastructure available to competent users. The paper summarizes the first year of activities of the EU FP7 Project Capacities EuCARD –European Coordination of Accelerator R&D. Several teams from this country participate actively in this project. The contribution from Polish research teams concerns: photonic and electronic measurement – control systems, RF-gun co-design, thin-film superconducting technology, superconducting transpo...

Romaniuk, R S

2010-01-01T23:59:59.000Z

68

Bull. Mater. Sci., Vol. 35, No. 5, October 2012, pp. 767772. c Indian Academy of Sciences. Anti-tumor activity of self-charged (Eu,Ca):WO3 and Eu:CaWO4  

E-Print Network [OSTI]

-tumor activity of self-charged (Eu,Ca):WO3 and Eu:CaWO4 nanoparticles CAO LIN , CAO JIEXIN , WANG CONG, CHE PING July 2011 Abstract. Non-stoichiometric (Eu,Ca):WO3 and Eu:CaWO4 nanoparticles with anti-tumor activity are synthe- sized in a sol­gel method by adding excessive Eu3+ and Ca2+ ions to tungsten oxide crystal

Volinsky, Alex A.

69

Radioactive contamination of SrI2(Eu) crystal scintillator  

E-Print Network [OSTI]

A strontium iodide crystal doped by europium (SrI2(Eu)) was produced by using the Stockbarger growth technique. The crystal was subjected to characterisation that included relative photoelectron output and energy resolution for gamma quanta. The intrinsic radioactivity of SrI2(Eu) crystal scintillator was tested both in scintillation mode and by using ultra-low background HPGe gamma spectrometry deep underground. The response of the SrI2(Eu) detector to alpha particles (alpha/beta ratio and pulse shape) was estimated by analysing the 226Ra trace contamination internal to the crystal. We have found alpha/beta=0.55 and no difference in scintillation decay for alpha particles and gamma quanta. The application of the obtained results in the search for the double electron capture and electron capture with positron emission in 84Sr has been investigated at a level of sensitivity T_1/2 \\sim 10^15-10^16 yr. The results of these studies demonstrate the potentiality of this material for a variety of scintillation appli...

Belli, P; Cerulli, R; Danevich, F A; Galenin, E; Gektin, A; Incicchitti, A; Isaienko, V; Kobychev, V V; Laubenstein, M; Nagorny, S S; Podviyanuk, R B; Tkachenko, S; Tretyak, V I

2011-01-01T23:59:59.000Z

70

In the Target Area  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

8 22 | Next | Last Back to Index NIF Target Chamber The interior of the NIF target chamber. The service module carrying technicians can be seen on the left. The target...

71

In the Target Area  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

6 22 | Next | Last Back to Index NIF Target Chamber A service system lift allows technicians to access the target chamber interior for inspection and maintenance. Photo Number:...

72

Achieving Airtight Ducts in Manufactured Housing  

E-Print Network [OSTI]

correlated with achieving CFM25OUT=3% in mastic sealed systems, but less reliably with taped systems. Cost for achieving duct tightness goals range from $4 to $8 including duct testing on the assembly line...

McIlvaine, J.; Beal, D.; Moyer, N.; Chasar, D.; Chandra, S.

2004-01-01T23:59:59.000Z

73

First SNS Target Replacement  

E-Print Network [OSTI]

First SNS Target Replacement Experience M. Dayton, M. Rennich, Van Graves, J. DeVore Presented by T.S. Department of Energy AHIP Workshop Oct. 2009 Overview · Initial Target Replacement · Target Maintenance-Battelle for the U.S. Department of Energy AHIP Workshop Oct. 2009 First SNS Target Replacement · Replacement

McDonald, Kirk

74

MECO Production Target Developments  

E-Print Network [OSTI]

be reoptimized Tungsten target Simulations of design parameters with GEANT3 indicate that both production targetMECO Production Target Developments James L. Popp University of California, Irvine NuFact'03 Columbia, June, 2003 #12;June, 2003J.L.Popp, UCI MECO Production Target 2 MECO Collaboration Institute

McDonald, Kirk

75

Achieving and Demonstrating Vehicle Technologies Engine Fuel...  

Broader source: Energy.gov (indexed) [DOE]

Engine Fuel Efficiency Milestones Achieving and Demonstrating Vehicle Technologies Engine Fuel Efficiency Milestones 2009 DOE Hydrogen Program and Vehicle Technologies...

76

Industrial Scale Demonstration of Smart Manufacturing Achieving...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Scale Demonstration of Smart Manufacturing Achieving Transformational Energy Productivity Gains Development of an Open Architecture, Widely Applicable Smart Manufacturing...

77

Advances in target normal sheath acceleration theory  

SciTech Connect (OSTI)

A theoretical model of the Target Normal Sheath Acceleration (TNSA) process, able to go beyond the limits of available descriptions, is developed. It allows to achieve a more satisfactory interpretation of TNSA. The theory, also supported by two dimensional particle-in-cell simulations, elucidates the role played by the main laser and target parameters. Comparison between model predictions and experimental data related to the target thickness dependence of the maximum ion energy is discussed, showing satisfactory agreement. The model can be used as a simple but effective tool to guide the design of future experiments.

Passoni, M.; Sgattoni, A. [Dipartimento di Energia, Politecnico di Milano, and Sezione di Milano INFN, Milan (Italy)] [Dipartimento di Energia, Politecnico di Milano, and Sezione di Milano INFN, Milan (Italy); Perego, C. [Dipartimento di Fisica, Università di Milano-Bicocca, Milan (Italy)] [Dipartimento di Fisica, Università di Milano-Bicocca, Milan (Italy); Batani, D. [Université Bordeaux, CNRS, CEA, CELIA (Centre Lasers Intenses et Applications), UMR 5107, F-33405 Talence (France) [Université Bordeaux, CNRS, CEA, CELIA (Centre Lasers Intenses et Applications), UMR 5107, F-33405 Talence (France); Dipartimento di Energia, Politecnico di Milano, and Sezione di Milano INFN, Milan (Italy)

2013-06-15T23:59:59.000Z

78

Economic and social rights within EU-Russia relations: a missed opportunity?.  

E-Print Network [OSTI]

??In recent years the EU’s strategy towards promoting human rights in Russia has been the focus of considerable internal and external attention, much of it… (more)

Bindman, Eleanor Frances

2013-01-01T23:59:59.000Z

79

Eu(III) Complexes of Octadentate 1-Hydroxy-2-pyridinones: Stability and Improved Photophysical Performance  

E-Print Network [OSTI]

1,2-HOPO) 2 ] ? , which lack a water molecule in the innerEu(III) complexes that lack a water molecule in their inner

Moore, Evan G.

2010-01-01T23:59:59.000Z

80

Optical and structural stability of blue SrO:Eu{sup 2+} phosphor  

SciTech Connect (OSTI)

Chemical stability of 6-coodinated SrO is a fundamental problem when this is used for various applications. In this study, optical and chemical stabilities of 8-coordinated SrO:Eu{sup 2+} phosphor were investigated. SrO:Eu{sup 2+} phosphor was synthesized from thermal treatment of SrO:Eu powder located on a single crystalline MgO at 1500° C under reduction atmosphere. Obtained 8-coordinated SrO:Eu{sup 2+} phosphor exhibit strong blue luminescence and chemical stability in distilled water for 3 days. Our findings prove that obtained 8-coordinated SrO:Eu{sup 2+} possesses relative optical and chemical stabilities in water. - Graphical abstract: Obtained 8-coordinated SrO:Eu{sup 2+} phosphor exhibit strong blue luminescence in distilled water. Highlights: • We investigated optical and chemical stabilities of 8-coordinated SrO:Eu{sup 2+} phosphor in water. • Obtained 8-coordinated SrO:Eu{sup 2+} phosphor exhibit strong blue luminescence and chemical stability in distilled water for 3 days. • We found that the 8-coodrodinated SrO crystal structure changed to SrCO{sub 3} crystal structure after the 5 days immersion. • The obtained SrO:Eu{sup 2+} phosphor possesses high chemical stability under water, compared with commercial (6-coordinated) SrO.

Komatsu, Keiji, E-mail: Keiji_Komatsu@mst.nagaokaut.ac.jp [Department of Material Science and Technology, Nagaoka University of Technology, 1603-1 Kamitomioka, Nagaoka, Niigata 940-2188 (Japan); Nakamura, Atsushi [Department of Material Science and Technology, Nagaoka University of Technology, 1603-1 Kamitomioka, Nagaoka, Niigata 940-2188 (Japan); Chubu Chelest Co. Ltd., 3-3-3 Hinagahigashi, Yokkaichi, Mie 510-0886 (Japan); Ohshio, Shigeo; Toda, Ikumi; Muramatsu, Hiroyuki; Saitoh, Hidetoshi [Department of Material Science and Technology, Nagaoka University of Technology, 1603-1 Kamitomioka, Nagaoka, Niigata 940-2188 (Japan)

2013-08-15T23:59:59.000Z

Note: This page contains sample records for the topic "achieving eu targets" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

A facile method for the preparation of Eu{sup 2+}-doped nanocrystalline BaFCl  

SciTech Connect (OSTI)

Graphical abstract: - Highlights: • A facile co-precipitation method for the preparation of Eu{sup 2+}-doped BaFCl. • Reduction of Eu{sup 3+} to Eu{sup 2+} by zinc granular under nitrogen flow. • Photoluminescence and cathodoluminescence spectroscopy of the as-prepared BaFCl:Eu{sup 2+}. • Temperature dependent photoluminescence properties of Eu{sup 2+} ions in BaFCl. - Abstract: A facile method for the preparation of Eu{sup 2+}-doped BaFCl is reported. The method is based on the co-precipitation of aqueous solutions of BaCl{sub 2} and NH{sub 4}F to yield BaFCl. The doping by europium in the 2+ oxidation state is realized by the reduction of Eu{sup 3+} to Eu{sup 2+} employing granular zinc in the BaCl{sub 2} solution under nitrogen. Powder X-ray diffraction and electron microscopy have been used to confirm the BaFCl phase and photoluminescence, in the temperature range of 2.5–290 K, and room-temperature cathodoluminescence spectra have been measured to characterize the Eu{sup 2+} ions in the sample.

Wang, Xianglei; Liu, Zhiqiang [School of Physical, Environmental and Mathematical Sciences, The University of New South Wales, UNSW Canberra (ADFA), Canberra, ACT 2600 (Australia); Stevens-Kalceff, Marion A. [School of Physics and Electron Microscope Unit, Mark Wainwright Analytical Centre, The University of New South Wales, Sydney, NSW 2052 (Australia); Riesen, Hans, E-mail: h.riesen@adfa.edu.au [School of Physical, Environmental and Mathematical Sciences, The University of New South Wales, UNSW Canberra (ADFA), Canberra, ACT 2600 (Australia)

2013-10-15T23:59:59.000Z

82

Experimental Target Injection and Tracking System  

SciTech Connect (OSTI)

Targets must be injected into an IFE power plant with an accuracy of and plusmn; 5 mm at a rate of approximately 5 to 10 each second. Targets must be tracked very accurately to allow driver beams to be aligned with defined points on the targets with accuracy {+-}200{mu}m for indirect drive and {+-}20{mu}m for direct drive. An experimental target injection and tracking system has been designed and is being constructed at General Atomics to investigate injection and tracking of both direct drive and indirect drive targets. The design is modular to allow testing of alternate target acceleration and tracking methods. The injector system will be used as a tool for testing the survivability of various target designs and provide feed back to the target designers. This 30 m long system will be the centerpiece of a Facility for developing IFE target fabrication and injection technologies. A high-speed high-flow gas valve (designed and built by Oak Ridge National Laboratory) will provide helium propellant gas to the targets. To avoid target damage from excessive acceleration, an 8 m gun barrel is being built to achieve 400 m/s target speed while not exceeding 10,000 m/s{sup 2} acceleration. Direct-drive targets are protected in the barrel by sabots that are spring loaded to separate into two halves after acceleration. A sabot deflector directs the sabot halves away from the target injection path. Gas expansion chambers and orifices, keep propellant gas out of the target-tracking region. Targets will be optically tracked with laser beams and line scan cameras. High-speed computations will calculate target position in less than 2 ms based on the output from the line-scan cameras. Target position and arrival time to a plane in the reaction chamber center will be predicted in real-time based on early target position measurements. The system design, construction progress, and early testing results will be presented.

Petzoldt, R.W. [General Atomics (United States); Alexander, N.B. [General Atomics (United States); Drake, T.J. [General Atomics (United States); Goodin, D.T. [General Atomics (United States); Stemke, R.W. [General Atomics (United States); Jonestrask, K

2003-07-15T23:59:59.000Z

83

EcoGrid EU (Smart Grid Project) | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address:011-DNA Jump37. It is classified asThisEcoGrid EU (Smart Grid Project) Jump to:

84

AirShares EU Carbon Allowances Fund | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of InspectorConcentrating SolarElectricEnergy Information LightningAiken Electric CoopCooling:AirShares EU

85

US-EU-Japan Working Group on Critical Materials  

Broader source: Energy.gov (indexed) [DOE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarly Career Scientists' Research Petroleum ReserveDepartment of Energy AtNoticeMotor CompanyUS-EU-Japan

86

In the Target Area  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

8 22 | Next | Last Back to Index NIF Target A NIF target contains a polished capsule about two millimeters in diameter, filled with cryogenic (super-cooled) hydrogen fuel. Photo...

87

In the Target Area  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

5 22 | Next | Last Back to Index NIF Target Chamber This view from the bottom of the chamber shows the target positioner being inserted. Pulses from NIF's high-powered lasers...

88

In the Target Area  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

9 22 | Next | Last Back to Index NIF Hohlraum A metallic case called a hohlraum holds the fuel capsule for NIF experiments. Target handling systems precisely position the target...

89

In the Target Area  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

3 22 | Next | Last Back to Index NIF Target Chamber Temperatures of 100 million degrees and pressures extreme enough to compress the target to densities up to 100 times the...

90

In the Target Area  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

to Index Target Chamber Viewing Window A new viewing window recently installed on the NIF Target Chamber will allow members of the NIF team and visitors to see inside the...

91

NNSA Sees Significant Achievements, Important Improvements in...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Sees Significant ... NNSA Sees Significant Achievements, Important Improvements in 2012 Posted: December 17, 2012 - 5:03pm As 2012 draws to a close, the National Nuclear Security...

92

achievement: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

POLICIES FOR ACHIEVING ENERGY JUSTICE IN SOCIETY: BEST PRACTICES FOR APPLYING SOLAR ENERGY) Project Center for Energy and Environmental Policy University of Delaware First...

93

Evaluation of Project Achievements in VOMARE -project.  

E-Print Network [OSTI]

??The purpose of the thesis is to study the achievements of VOMARE –project from the Finnish Lifeboat Institutions perspective. The organisation is a roof organisation… (more)

Kokkarinen, Eeva

2011-01-01T23:59:59.000Z

94

Achieving and Demonstrating Vehicle Technologies Engine Fuel...  

Broader source: Energy.gov (indexed) [DOE]

Vehicle Technologies Engine Fuel Efficiency Milestones Achieving and Demonstrating Vehicle Technologies Engine Fuel Efficiency Milestones 2010 DOE Vehicle Technologies and Hydrogen...

95

NERSC Announces Third Annual HPC Achievement Awards  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Computing Center (NERSC) announced the winners of its third annual High Performance Computing (HPC) Achievement Awards on Feb. 24, 2015, during the annual NERSC User...

96

Print this article Close This Window EU OKs India joining ITER nuclear reactor project  

E-Print Network [OSTI]

Print this article Close This Window EU OKs India joining ITER nuclear reactor project Fri Dec 2-billion-euro project to build an experimental nuclear fusion reactor that in the long-run could provide virtually unlimited, cheap and clean energy. The EU's willingness to work with India on a civil nuclear

97

EU in push for support on nuclear fusion reactor September 26, 2004  

E-Print Network [OSTI]

EU in push for support on nuclear fusion reactor September 26, 2004 Page Tool EU ministers have agreed to try to win broad international support for a plan to build a futuristic nuclear reactor to obtain power through nuclear fusion, a clean energy source. But views are split on where the ITER reactor

98

THE EU-AFRICA ENERGY COOPERATION: CHALLENGES AND OPPORTUNITIES FOR PUBLIC AND PRIVATE BUSINESSES  

E-Print Network [OSTI]

multilateral and bilateral energy relationships with Africa. There are three EU-Africa energy initiativesTHE EU-AFRICA ENERGY COOPERATION: CHALLENGES AND OPPORTUNITIES FOR PUBLIC AND PRIVATE BUSINESSESD Candidate Energy security, sustainable development and mutual benefits are the three keywords

Boyer, Edmond

99

Political and Economic Integration in the EU: The Case of Failed Tax Harmonization*  

E-Print Network [OSTI]

Political and Economic Integration in the EU: The Case of Failed Tax Harmonization* FABIO. That there was only a limited transfer of tax authority to the EU exemplifies the failure of political and fiscal integration. Using a political economy framework, this article analyzes why the heads of state rejected tax

Wolfe, Patrick J.

100

STYRIAN ACADEMY for Sustainable Energies | http://styrianacademy.eu Graz University of Technology  

E-Print Network [OSTI]

STYRIAN ACADEMY for Sustainable Energies | http://styrianacademy.eu Graz University of Technology sustainable energy systems. The STYRIAN ACADEMY taps into the know how of top-class scientists and entrepreneurs from the European Sustainable Energy Innovation Alliance (eseia) (www.eseia.eu). The 2011 STYRIAN

Note: This page contains sample records for the topic "achieving eu targets" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

ASTRONOMY TO INSPIRE AND EDUCATE YOUNG CHILDREN EU-UNAWE Lorentz Center Workshop  

E-Print Network [OSTI]

ASTRONOMY TO INSPIRE AND EDUCATE YOUNG CHILDREN EU-UNAWE Lorentz Center Workshop Official Opening. Mitchell, MEP, Chair, EU Parliamentary Committee on Development Astronomy Research and Education in South Committee for Education, Culture and Science Video messages (5 min) Astronomy and Space collaborations

Galis, Frietson

102

Ris DTU Dec.3 2009WindScanner.eu 1 Ris DTU, Technical University of Denmark  

E-Print Network [OSTI]

% to the average Danish electricity consumption · Today DK is leading worldwide regarding research and development market · By year 2020 EU's goal is to cover ~20% of the Unions electricity consumption via sustainable of wind power technology · EU Governments wish to maintain the lead Internationally on the wind power

103

Cross Border Trading and Borrowing in the EU ETS A. Denny Ellerman* and Raphael Trotignon**  

E-Print Network [OSTI]

multi- national trading system, the European Union's CO2 Emissions Trading Scheme (EU ETS) provides** This paper exploits a little used data resource within the central registry of the European Union's Emissions Trading System (EU ETS) to analyze cross border trading and inter-year borrowing during the first trading

104

A bottom-up analysis of including aviation within theEU's Emissions Trading Scheme  

E-Print Network [OSTI]

A bottom-up analysis of including aviation within theEU's Emissions Trading Scheme Alice Bows-up analysis of including aviation within the EU's Emissions Trading Scheme Alice Bows & Kevin Anderson Tyndall's emissions trading scheme. Results indicate that unless the scheme adopts both an early baseline year

Watson, Andrew

105

Price relationships in the EU emissions trading system Julien Chevallier1  

E-Print Network [OSTI]

1 Price relationships in the EU emissions trading system Julien Chevallier1 Université Paris Dauphine Abstract The Emissions Trading Scheme (ETS) constrains industrial polluters to buy/sell CO2 the price relationships in the EU emissions trading system. The United Nations Framework Convention

Paris-Sud XI, Université de

106

An EIE/Altener project Co-funded by the EU Commission  

E-Print Network [OSTI]

of Biogas for Electricity and Heat Production in EU countries. Economic and Environmental Benefits of Biogas is to assess the economic, environmental and energy aspects of the biogas production by centralised co-digestion in selected areas of six EU countries, which have been slow to implement biogas technology. The assessment

107

High Power Cryogenic Targets  

SciTech Connect (OSTI)

The development of high power cryogenic targets for use in parity violating electron scattering has been a crucial ingredient in the success of those experiments. As we chase the precision frontier, the demands and requirements for these targets have grown accordingly. We discuss the state of the art, and describe recent developments and strategies in the design of the next generation of these targets.

Gregory Smith

2011-08-01T23:59:59.000Z

108

Accelerator Quality HTS Dipole Magnet Demonstrator Designs for the EuCARD-2, 5 Tesla 40 mm Clear Aperture Magnet  

E-Print Network [OSTI]

Future high-energy accelerators will need very high magnetic fields in the range of 20 T. The EuCARD-2 work-package-10 is a collaborative push to take HTS materials into an accelerator quality demonstrator magnet. The demonstrator will produce 5 T standalone and between 17 T and 20 T, when inserted into the 100 mm aperture of Fresca-2 high field out-sert magnet. The HTS magnet will demonstrate the field strength and field quality that can be achieved. An effective quench detection and protection system will have to be developed to operate with the HTS superconducting materials. This paper presents a ReBCO magnet design using multi strand Roebel cable that develops a stand-alone field of 5 T in a 40 mm clear aperture and discusses the challenges associated with good field quality using this type of material. A selection of magnet designs is presented as result of a first phase of development.

Kirby, GA; Ballarino, A; Bottura, L; Chouika, N; Clement, S; Datskov, V; Fajardo, L; Fleiter, J; Gauthier, R; Gentini, L; Lambert, L; Lopes, M; Perez, JC; de Rijk, G; Rijllart, A; Rossi, L; ten Kate, H; Durante, M; Fazilleau, P; Lorin, C; Härö, E; Stenvall, A; Caspi, S; Marchevsky, M; Goldacker, W; Kario, A

2015-01-01T23:59:59.000Z

109

Accelerator Quality HTS Dipole Magnet Demonstrator designs for the EuCARD-2, 5 Tesla 40 mm Clear Aperture Magnet  

E-Print Network [OSTI]

Future high-energy accelerators will need very high magnetic fields in the range of 20 T. The EuCARD-2 work-package-10 is a collaborative push to take HTS materials into an accelerator quality demonstrator magnet. The demonstrator will produce 5 T standalone and between 17 T and 20 T, when inserted into the 100 mm aperture of Fresca-2 high field out-sert magnet. The HTS magnet will demonstrate the field strength and field quality that can be achieved. An effective quench detection and protection system will have to be developed to operate with the HTS superconducting materials. This paper presents a ReBCO magnet design using multi strand Roebel cable that develops a stand-alone field of 5 T in a 40 mm clear aperture and discusses the challenges associated with good field quality using this type of material. A selection of magnet designs is presented as result of a first phase of development.

Kirby, G; Ballarino, A; Bottura, L; Chouika, N; Clement, S; Datskov, V; Fajardo, L; Fleiter, J; Gauthier, R; Lambert, L; Lopes, M; Perez, J; DeRijk, G; Rijllart, A; Rossi, L; Ten Kate, H; Durante, M; Fazilleau, P; Lorin, C; Haro, E; Stenvall, A; Caspi, S; Marchevsky, M; Goldacker, W; Kario, A

2014-01-01T23:59:59.000Z

110

Multi-level governance revisited: comparing the strategies of interest representation of legislative regions in EU environmental policy- making.   

E-Print Network [OSTI]

Since the 1980s, regions have taken a strong interest in EU policy-making and increasingly demanded representation in the process. This has given rise to the concept of multi-level governance (MLG) in EU policy-making, ...

Högenauer, Anna-Lena

2011-07-04T23:59:59.000Z

111

Measurement of Particle Production from the MICE Target  

SciTech Connect (OSTI)

This article describes the prototype target and the requirements for the target mechanism needed to provide a beam of muons to the Muon Ionization Cooling Experiment (MICE) from the ISIS accelerator at RAL. The mechanism has achieved the required 85g acceleration to be able to insert the target into the ISIS beam during the last 2 ms of the accelerating period. A prototype target test was used to integrate the target into ISIS and to measure the ISIS beam envelope, particle yields and beam loss, showing good agreement between data and simulations.

Soler, F. J. P.; Walaron, K. [Department of Physics and Astronomy, University of Glasgow, Glasgow (United Kingdom); Booth, C.; Carson, M.; Hodgson, P.; Howlett, L.; Smith, P. [Department of Physics and Astronomy, University of Sheffield, Sheffield (United Kingdom); Adams, D.; Edgecock, R.; Murray, W.; Tilley, K. [Rutherford Appleton Laboratory, Science and Technology Facilities Council (United Kingdom); Cobb, J.; Rayner, M. [Sub-department of Nuclear and Particle Physics, University of Oxford, Oxford (United Kingdom); Roberts, T. [Illinois Institute of Technology and Muons Inc., Illinois (United States)

2008-02-21T23:59:59.000Z

112

The Role of Domestic Factors in the Formation of Trade Unions: A Look at Turkey/EU Relations  

E-Print Network [OSTI]

studied Turkey and the European Union (EU). Turkey was officially admitted as a candidate country to the EU in 1997. Despite efforts to meet EU demands, Turkey’s admittance has been blocked. As recently as 2007 Turkey was denied membership, while...

Youngblood, Kristina Lynne

2008-08-19T23:59:59.000Z

113

EU could go it alone on nuclear fusion plant 29.11.2004 -10:02 CET | By Richard Carter  

E-Print Network [OSTI]

EU could go it alone on nuclear fusion plant 29.11.2004 - 10:02 CET | By Richard Carter The EU if no agreement can be reached with Japan by the end of the year over where to build the plant, according to EU research ministers. Talks over the world's first nuclear fusion reactor have stalled because Japan

114

Two Peer Review Processes Help EM Achieve Cost, Schedule Targets in  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion |Energy Usage »of EnergyTheTwo New Energy Storage Safety Reports Now Available Two

115

Beam On Target! - CEBAF Accelerator Achieves 12 GeV Commissioning Milestone  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth (AOD)ProductssondeadjustsondeadjustAboutScience ProgramBackground High the cover:Battery BoostAdvancedBe|

116

Collaboration drives achievement in protein structure research  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

machine that targets viral DNA LOS ALAMOS, N.M., Sept. 15, 2014-When this week's print issue of the journal Science comes out, a collective cheer will go up from New...

117

Achieving Energy Efficiency in Exis0ng Buildings How achieve significant commercial building energy efficiency?  

E-Print Network [OSTI]

· Led BU Energy Audit over past 3 years · University Sustainability CommiAchieving Energy Efficiency in Exis0ng Buildings ·How achieve significant commercial building energy efficiency? Focus on HVAC. ·Our solu0on

Hutyra, Lucy R.

118

From Earth to Saturn: Los Alamos Achievements  

ScienceCinema (OSTI)

A compilation of some of the remarkable achievements of Los Alamos National Laboratory staff over the past 12 months. Originally aired in the June 26, 2008 Director's all-employee meeting.

McMillan, Charlie; Wilson, Cathy; Nekimkem, Howard; Martinez, Johnnie; Martz, Joe; Albright, Brian

2014-08-13T23:59:59.000Z

119

Target Cost Management Strategy  

E-Print Network [OSTI]

Target cost management (TCM) is an innovation of Japanese management accounting system and by common sense has been considered with great interest by practitioners. Nowadays, TCM related

Okano, Hiroshi

1996-01-01T23:59:59.000Z

120

Low Voltage White Phosphorescent OLED Achievements  

Broader source: Energy.gov [DOE]

Universal Display Corporation (UDC) and its research partners at Princeton University and the University of Southern California have succeeded in developing a white phosphorescent OLED (PHOLED™) that achieved a record efficiency of 20 lumens per watt. This achievement is the result of the team's collaborative efforts to increase the efficiency of PHOLED lighting by focusing on two critical factors: lowering the drive voltages and increasing the amount of light extracted.

Note: This page contains sample records for the topic "achieving eu targets" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Warming to Renewable Energy: Policies to Promote Renewable Heat in the UK   

E-Print Network [OSTI]

In 2009, the UK government set a target of achieving 15% of overall energy consumption from renewable sources by 2020, as part of the EU's goals of reducing emission levels within the EU and increasing consumption from renewable energy sources...

Hawkins, Henry R.

2012-01-01T23:59:59.000Z

122

Preparation and fluorescence property of red-emitting Eu{sup 3+}-activated amorphous calcium silicate phosphor  

SciTech Connect (OSTI)

This paper describes the energy efficient synthesis of a red-emitting Eu{sup 3+}-activated amorphous calcium silicate phosphor produced by heating a Eu{sup 3+}-activated calcium silicate hydrate phosphor. Concentration quenching of the Eu{sup 3+}-activated calcium silicate hydrate phosphor was not observed and the emission intensity did not decrease up to a Eu/(Ca+Eu) atomic ratio of 0.46. Heating of the Eu{sup 3+}-activated calcium silicate hydrate (Eu/(Ca+Eu) atomic ratio = 0.32) phosphor produced an amorphous Eu{sup 3+}-activated calcium silicate phosphor, which had a maximum emission intensity at 870 {sup o}C and emitted in the red under near-ultraviolet irradiation (395 nm). The emission intensity of the Eu{sup 3+}-activated amorphous calcium silicate phosphor was about half that of a commercial BaMgAl{sub 10}O{sub 17}:Eu{sup 2+} phosphor, and shows great potential for application in white light-emitting diodes.

Kojima, Yoshiyuki, E-mail: ykojima@chem.cst.nihon-u.ac.jp [Department of Materials and Applied Chemistry, Faculty of Science and Technology, Nihon University, Tokyo 101-8308 (Japan)] [Department of Materials and Applied Chemistry, Faculty of Science and Technology, Nihon University, Tokyo 101-8308 (Japan); Kamei, Shinnosuke; Nishimiya, Nobuyuki [Department of Materials and Applied Chemistry, Faculty of Science and Technology, Nihon University, Tokyo 101-8308 (Japan)] [Department of Materials and Applied Chemistry, Faculty of Science and Technology, Nihon University, Tokyo 101-8308 (Japan)

2010-02-15T23:59:59.000Z

123

Neutrino Factory Target Vessel  

E-Print Network [OSTI]

by UT-Battelle for the U.S. Department of Energy Target Vessel Update 26 June 2012 Cooling Channel in both walls for draining · Downstream end can be shortened, assuming the window cooling is adequate #12;11 Managed by UT-Battelle for the U.S. Department of Energy Target Vessel Update 26 June 2012 Remote Handling

McDonald, Kirk

124

Environmental management system objectives & targets results summary :  

SciTech Connect (OSTI)

Sandia National Laboratories/New Mexicos (SNL/NM) Environmental Management System is the integrated approach for members of the workforce to identify and manage environmental risks. Each Fiscal Year (FY) SNL/NM performs an analysis to identify environmental aspects, and the environmental programs associated with them are charged with the task of routinely monitoring and measuring the objectives and targets that are established to mitigate potential impacts of SNL/NMs operations on the environment. An annual summary of the results achieved towards meeting established Sandia Corporation and SNL/NM Site-specific objectives and targets provides a connection to, and rational for, annually revised environmental aspects. The purpose of this document is to summarize the results achieved and documented in FY2013.

Vetter, Douglas Walter

2014-04-01T23:59:59.000Z

125

Appendix A MIT Joint Program Report 193 1 Appendix A: Sectoral Trading between the EU-ETS and Emerging Countries1  

E-Print Network [OSTI]

impact on Chinese electricity generation but reverses changes in EU electricity generation driven decreases by 8% in 2030. Moderate impacts on Mexican electricity generation are observed while changes in EU electricity generation induced by the EU-ETS persist. Sectoral trading between the EU and the four countries

126

Energy Transition in France: EUROGIA2020, a tool to achieve low carbon  

E-Print Network [OSTI]

Energy Transition in France: EUROGIA2020, a tool to achieve low carbon:00 (CET Paris time) French National Assembly adopted the Energy Transition Bill on October 14 participation in energy transition. The bill is introducing ambitious targets to reduce the overall energy

van Tiggelen, Bart

127

Brussels, 29 April 2005 EU-JAPAN Summit -2 May 2005  

E-Print Network [OSTI]

in Luxembourg on 2 May 2005. Alongside European Commission President José Manuel Durão Barroso and European. President Barroso said: "I am looking forward to my first Summit meeting with Prime Minister Koizumi. EU

128

Options introduction and volatility in the EU ETS1 Julien Chevallier 2  

E-Print Network [OSTI]

in the European Union Emissions Trading Scheme (EU ETS), the European Climate Exchange (ECX) has introduced option the introduction of options has increased or decreased volatility in the European Union Emissions Trading Sc

Paris-Sud XI, Université de

129

STYRIAN ACADEMY for Sustainable Energies | http://styrianacademy.eu BER DIE STYRIAN ACADEMY  

E-Print Network [OSTI]

STYRIAN ACADEMY for Sustainable Energies | http://styrianacademy.eu #12;ÜBER DIE STYRIAN ACADEMY Die STYRIAN ACADEMY ist eine europäische Aus- und Weiterbildungsplattform mit Standort Steiermark. Die STYRIAN ACADEMY 2010/2011 ist dem europäischen Zukunftsthema nachhaltige Energiesysteme gewidmet. Die

130

Australia-EU Linkage Story Policy evolution tied to domestic political landscape abandonment of  

E-Print Network [OSTI]

· Australia-EU Linkage Story Policy evolution tied to domestic political landscape ­ abandonment on post-AU election results New government in Australia has policy framework of `direct action' - paying

California at Davis, University of

131

CO2 Abatement in the UK Power Sector: Evidence from the EU ETS Trial Period  

E-Print Network [OSTI]

This paper provides an empirical assessment of CO2 emissions abatement in the UK power sector during the trial period of the EU ETS. Using an econometrically estimated model of fuel switching, it separates the impacts of ...

Ellerman, A. Denny

2008-01-01T23:59:59.000Z

132

-News Home Help EU reiterates warning to Japan over nuclear project  

E-Print Network [OSTI]

reactor without Japanese support, to end a standoff with Tokyo about who will host the project. news web and Russia back France's bid for it to be based in Cadarache, southern France. news web sites EU science

133

The EU’s Emissions Trading Scheme: A Prototype Global System?  

E-Print Network [OSTI]

The European Union's Emission Trading Scheme (EU ETS) is the world's first multinational cap-and-trade system for greenhouse gases. As an agreement between sovereign nations with diverse historical, institutional, and ...

Ellerman, A. Denny

134

The EU’s Emissions Trading Scheme: A Proto-Type Global System?  

E-Print Network [OSTI]

The European Union's Emission Trading Scheme (EU ETS) is the world's first multinational cap-and-trade system for greenhouse gases. As an agreement between sovereign nations with diverse historical, institutional, and ...

Ellerman, A. Denny

2008-01-01T23:59:59.000Z

135

Allocation and competitiveness in the EU emissions trading scheme: policy overview  

E-Print Network [OSTI]

The European emissions trading scheme (EU ETS) has an efficient and effective market design that risks being undermined by three interrelated problems: the approach to allocation; the absence of a credible commitment to post-2012 continuation...

Grubb, Michael; Neuhoff, Karsten

136

EU Agri-Environmental Payments: Appropriate Policy or Protectionism in Disguise?  

E-Print Network [OSTI]

1 Theory of agri-environmental policy Dr. Thilo Glebe EUto look at the agri-environmental policy from a theoreticalto the EU agri- environmental policy I want to ask therefore

Glebe, Thilo

2005-01-01T23:59:59.000Z

137

EU Blanket Design Activities and Neutronics Support Efforts  

SciTech Connect (OSTI)

An overview is provided of the design activities and the related neutronics support efforts conducted in the European Union for the development of breeder blankets for future fusion power reactors. The EU fusion programme considers two blanket lines, the Helium-Cooled Pebble Bed (HCPB) blanket with Lithium ceramics pebbles (Li{sub 4}SiO{sub 4} or Li{sub 2}TiO{sub 3}) as breeder and beryllium pebbles as neutron multiplier, and the Helium-Cooled Lithium-Lead (HCLL) blanket with the Pb-Li eutectic alloy as breeder and neutron multiplier. The blanket design and the related R and D efforts are based on the use of the same coolant and the same modular blanket structure to minimise the development costs as much as possible. The neutronic support efforts include design analyses for the layout and optimization of the modular HCPB/HCLL blankets based on detailed three-dimensional Monte Carlo calculations as well as underlying neutronics activities conducted in the frame of the European Fusion and Activation File (EFF/EAF) projects to develop qualified nuclear data and computational tools for reliable neutronics design calculations.

Fischer, U. [Forschungszentrum Karlsruhe (Germany); Batistoni, P. [ENEA Fusion Division (Italy); Boccaccini, L.V. [Forschungszentrum Karlsruhe (Germany); Giancarli, L. [CEA Saclay (France); Hermsmeyer, S. [Forschungszentrum Karlsruhe (Germany); Poitevin, Y. [CEA Saclay (France)

2005-05-15T23:59:59.000Z

138

Achieving a Fieldable, Acquisition Process for Human-  

E-Print Network [OSTI]

-Based Operations) Objective Effect Desired Capability Exploit Info Ops Engage Targets with Survivable Weapon of Industrial Engineering University of Buffalo (SUNY) Ken Boff Chief Scientist AFRL Human Effectiveness Effectiveness Directorate Air Force Research Laboratory John Flach Department of Psychology Wright State

Cummings, Mary "Missy"

139

Consumption-Based Adjustment of China's Emissions-Intensity Targets: An Analysis of its Potential Economic Effects  

E-Print Network [OSTI]

China’s Twelfth Five-Year Plan (2011–2015) aims to achieve a national carbon intensity reduction of 17% through differentiated targets at the provincial level. Allocating the national target among China’s provinces is ...

Springmann, M.

140

2 Key Achievements 7 Greenhouse Gas Reduction  

E-Print Network [OSTI]

Princeton University Reports Contents 2 Key Achievements 7 Greenhouse Gas Reduction Campus Energy was established in 2008, the University has invested $5.3 million in energy-savings projects, resulting in annual of a 5.2-megawatt solar collector field. · Audit the remaining 20 of the top 50 energy- consuming

Note: This page contains sample records for the topic "achieving eu targets" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Nano-Machines Achieve Huge Mechanical Breakthrough  

E-Print Network [OSTI]

NANO TECH Nano-Machines Achieve Huge Mechanical Breakthrough Dublin, Ireland (SPX) Sep 08, 2005 that use molecular 'nano'-machines of this kind to help perform physical tasks. Nano-machines could also owners set to return to battered Orleans l Six dead, two missing after heavy rains hit Page 1 of 3Nano

Leigh, David A.

142

achieving economic growth: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

remain simpleITERATIVE COMBINATORIAL AUCTIONS: ACHIEVING ECONOMIC AND COMPUTATIONAL EFFICIENCY David Christopher Chen, Yiling 6 ITERATIVE COMBINATORIAL AUCTIONS: ACHIEVING...

143

In the Target Area  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

1 22 | Next | Last Back to Index NIF Hohlraum This artist's rendering shows a NIF target pellet inside a hohlraum capsule with laser beams entering through openings on either...

144

In the Target Area  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

1 22 | Next | Last Back to Index NIF Target Chamber On March 10, 2009, at 3:15 a.m., a 192-beam laser shot delivered 1.1 million joules of ultraviolet light to the center of the...

145

SNS Target Systems Operational  

E-Print Network [OSTI]

a failed gas seal on the shaft and leaking oil seals but has operated well since then · The moderator 7.5 k First target replacement · No observed corrosion · Internal Boroscope examination in progress · ~ 50 mm

McDonald, Kirk

146

Optimization Studies for ISOL Type High-Powered Targets  

SciTech Connect (OSTI)

The research studied one-step and two-step Isotope Separation on Line (ISOL) targets for future radioactive beam facilities with high driver-beam power through advanced computer simulations. As a target material uranium carbide in the form of foils was used because of increasing demand for actinide targets in rare-isotope beam facilities and because such material was under development in ISAC at TRIUMF when this project started. Simulations of effusion were performed for one-step and two step targets and the effects of target dimensions and foil matrix were studied. Diffusion simulations were limited by availability of diffusion parameters for UCx material at reduced density; however, the viability of the combined diffusion?effusion simulation methodology was demonstrated and could be used to extract physical parameters such as diffusion coefficients and effusion delay times from experimental isotope release curves. Dissipation of the heat from the isotope-producing targets is the limiting factor for high-power beam operation both for the direct and two-step targets. Detailed target models were used to simulate proton beam interactions with the targets to obtain the fission rates and power deposition distributions, which were then applied in the heat transfer calculations to study the performance of the targets. Results indicate that a direct target, with specification matching ISAC TRIUMF target, could operate in 500-MeV proton beam at beam powers up to ~40 kW, producing ~8 1013 fission/s with maximum temperature in UCx below 2200 C. Targets with larger radius allow higher beam powers and fission rates. For the target radius in the range 9-mm to 30-mm the achievable fission rate increases almost linearly with target radius, however, the effusion delay time also increases linearly with target radius.

Remec, Igor [Oak Ridge National Laboratory] [Oak Ridge National Laboratory; Ronningen, Reginald Martin [Michigan State University] [Michigan State University

2013-09-24T23:59:59.000Z

147

Illegal Logging Gives EU Massive Eco-Headache With tropical rainforests continuing to disappear at an alarming rate, the EU is partially to  

E-Print Network [OSTI]

17.04.2008 Illegal Logging Gives EU Massive Eco-Headache With tropical rainforests continuing. The problem of illegal logging is particularly acute in Indonesia, allegedly the world's third largest gases and global warming, rising demand for palm oil has resulted in local companies burning woods

148

Real Time Monitoring: Achieving Energy Efficiency  

E-Print Network [OSTI]

ABSTRACT: IECBO?s International Conference for Enhanced Building Operations November 17-18, 2009 Austin, Texas. Energy @ Work www.Energy-Efficiency.com File: Rouse_ Abstract Contact: scott.rouse@energy-efficiency....com, (416) 402-0525 Proposal Type: o Electronic proposal for presentation Title of Paper: o Real Time Monitoring: Achieving Energy Efficiency! Conference: o ICEBO?s International Conference for Enhanced Building Operations Submitted by: o...

Rouse, S.

149

NNSA Highlights 2014 Achievements | National Nuclear Security  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas Conchas recovery challengeMultiscaleLogosAdministration Highlights 2014 Achievements |

150

Secretary's 2013 Achievement Awards | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-Up from the Gridwise Global1WasteRecoveryAwards Secretary's 2013 Achievement Awards

151

Secretary's 2014 Achievement Awards | Department of Energy  

Energy Savers [EERE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of Inspector GeneralDepartment of Energyof the Americas | Department ofofDelivered |Technology4 Achievement

152

Development of a hydrogen and deuterium polarized gas target for application in storage rings. Progress report  

SciTech Connect (OSTI)

Polarized gas targets of atomic hydrogen and deuterium have significant advantages over conventional polarized targets, e.g. chemical and isotopic purity, large polarization including deuteron tensor polarization, absence of strong magnetic fields, rapid polarization reversal. While in principle the beam of polarized atoms from an atomic beam source (Stern-Gerlach spin separation) can be used as a polarized target, the target thickness achieved is too small for most applications. We propose to increase the target thickness by injecting the polarized atoms into a storage cell. Provided the atoms survive several hundred wall collisions without losing their polarization, it will be possible to achieve a target thickness of 10{sup 13} to 10{sup 14} atoms/cm{sup 2} by injection of polarized atoms from an atomic-beam source into suitable cells. Such targets are very attractive as internal targets in storage rings.

Haeberli, W.

1992-02-01T23:59:59.000Z

153

Development of a hydrogen and deuterium polarized gas target for application in storage rings  

SciTech Connect (OSTI)

Polarized gas targets of atomic hydrogen and deuterium have significant advantages over conventional polarized targets, e.g. chemical and isotopic purity, large polarization including deuteron tensor polarization, absence of strong magnetic fields, rapid polarization reversal. While in principle the beam of polarized atoms from an atomic beam source (Stern-Gerlach spin separation) can be used as a polarized target, the target thickness achieved is too small for most applications. We propose to increase the target thickness by injecting the polarized atoms into a storage cell. Provided the atoms survive several hundred wall collisions without losing their polarization, it will be possible to achieve a target thickness of 10{sup 13} to 10{sup 14} atoms/cm{sup 2} by injection of polarized atoms from an atomic-beam source into suitable cells. Such targets are very attractive as internal targets in storage rings.

Haeberli, W.

1992-02-01T23:59:59.000Z

154

A violet emission in ZnS:Mn,Eu: Luminescence and applications for radiation detection  

SciTech Connect (OSTI)

We prepared manganese and europium co-doped zinc sulfide (ZnS:Mn,Eu) phosphors and used them for radiation detection. In addition to the red fluorescence at 583?nm due to the d-d transition of Mn ions, an intense violet emission at 420?nm is newly observed in ZnS:Mn,Eu phosphors. The emission is related to Eu{sup 2+} doping but only appears at certain Eu{sup 2+} concentrations. It is found that the intensity of the 420?nm violet fluorescence is X-ray does-dependent, while the red fluorescence of 583?nm is not. The ratio of fluorescence intensities at 420?nm and 583?nm has been monitored as a function of X-ray doses that exposed upon the ZnS:Mn,Eu phosphors. Empirical formulas are provided to estimate the doses of applied X-ray irradiation. Finally, possible mechanisms of X-ray irradiation induced fluorescence quenching are discussed. The intense 420?nm emission not only provides a violet light for solid state lighting but also offers a very sensitive method for radiation detection.

Ma, Lun; Chen, Wei, E-mail: weichen@uta.edu [Department of Physics and the SAVANT Center, The University of Texas at Arlington, Arlington, Texas 76019-0059 (United States); Jiang, Ke [Center for Biofrontiers Institute, University of Colorado at Colorado Springs, 1420 Austin Bluffs Pkwy., Colorado Springs, Colorado 80918 (United States); Liu, Xiao-tang [Department of Physics and the SAVANT Center, The University of Texas at Arlington, Arlington, Texas 76019-0059 (United States); Department of Applied Chemistry, College of Science, South China Agricultural University, Guangzhou 510642 (China)

2014-03-14T23:59:59.000Z

155

Foam encapsulated targets  

DOE Patents [OSTI]

Foam encapsulated laser-fusion targets wherein a quantity of thermonuclear fuel is embedded in low density, microcellular foam which serves as an electron conduction channel for symmetrical implosion of the fuel by illumination of the target by one or more laser beams. The fuel, such as DT, is contained within a hollow shell constructed of glass, for example, with the foam having a cell size of preferably no greater than 2 .mu.m, a density of 0.065 to 0.6.times.10.sup.3 kg/m.sup.3, and external diameter of less than 200 .mu.m.

Nuckolls, John H. (Livermore, CA); Thiessen, Albert R. (Livermore, CA); Dahlbacka, Glen H. (Livermore, CA)

1983-01-01T23:59:59.000Z

156

Target | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia:FAQ < RAPID Jump to:Seadov Pty LtdSteen,Ltd Jump to:Taos County, New Mexico: EnergyTarget GmbH Jump to:Target

157

Differentiation and Dynamics of Competitiveness Impacts from the EU ETS  

E-Print Network [OSTI]

efficiency measures or adopting more advanced technologies, without switching technology. For example, replacing a coal- fired steam turbine with pulverised-coal technology can achieve 27% emissions reductions and replacing a single cycle gas turbine... competitiveness on a country level because a household or transportation in one country does not ‘compete’ with their counterpart in another country, hence the concept of nationwide competitiveness is ill- 3...

Sato, Misato; Grubb, Michael; Cust, J; Chan, Katie; Korppoo, Anna; Ceppi, Pablo

158

Achievable Qubit Rates for Quantum Information Wires  

E-Print Network [OSTI]

Suppose Alice and Bob have access to two separated regions, respectively, of a system of electrons moving in the presence of a regular one-dimensional lattice of binding atoms. We consider the problem of communicating as much quantum information, as measured by the qubit rate, through this quantum information wire as possible. We describe a protocol whereby Alice and Bob can achieve a qubit rate for these systems which is proportional to N^(-1/3) qubits per unit time, where N is the number of lattice sites. Our protocol also functions equally in the presence of interactions modelled via the t-J and Hubbard models.

Hulya Yadsan-Appleby; Tobias J. Osborne

2011-02-15T23:59:59.000Z

159

Secretary's Achievement Award (SING) | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-Up from the Gridwise Global1WasteRecoveryAwards Secretary'sSING) Secretary's Achievement

160

Secretary's Achievement Award | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-Up from the Gridwise Global1WasteRecoveryAwards Secretary'sSING) Secretary'sAchievement

Note: This page contains sample records for the topic "achieving eu targets" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Sandia National Laboratories: Group Achievement Award  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 -theErik Spoerke SSLS Exhibit at ExploraGlobal SandiaVermont andGroup Achievement

162

EURISOL-DS MULTI-MW TARGET ISSUES: BEAM WINDOW AND TRANSVERSE FILM TARGET  

E-Print Network [OSTI]

The analysis of the EURISOL-DS Multi_MW target precise geometry (Fig.1) has proved that large fission yields can be achieved with a 4 MW, providing a technically feasible design to evacuate the power deposited in the liquid mercury. Different designs for the mercury flow have been proposed, which maintain its temperature below the boiling point with moderate flow speeds (maximum 4 m/s).

Adonai Herrera-Martínez, Yacine Kadi

163

Targeted radionuclide therapy  

SciTech Connect (OSTI)

Targeted radionuclide therapy (TRT) seeks molecular and functional targets within patient tumor sites. A number of agents have been constructed and labeled with beta, alpha, and Auger emitters. Radionuclide carriers spanning a broad range of sizes; e.g., antibodies, liposomes, and constructs such as nanoparticles have been used in these studies. Uptake, in percent-injected dose per gram of malignant tissue, is used to evaluate the specificity of the targeting vehicle. Lymphoma (B-cell) has been the primary clinical application. Extension to solid tumors will require raising the macroscopic absorbed dose by several-fold over values found in present technology. Methods that may effect such changes include multistep targeting, simultaneous chemotherapy, and external sequestration of the agent. Toxicity has primarily involved red marrow so that marrow replacement can also be used to enhance future TRT treatments. Correlation of toxicities and treatment efficiency has been limited by relatively poor absorbed dose estimates partly because of using standard (phantom) organ sizes. These associations will be improved in the future by obtaining patient-specific organ size and activity data with hybrid SPECT/CT and PET/CT scanners.

Williams, Lawrence E.; DeNardo, Gerald L.; Meredith, Ruby F. [Radiology Division, City of Hope National Medical Center, Duarte, California 91010 (United States); Internal Medicine, University of California Davis Medical Center, 1508 Alhambra Boulevard, Suite 3100, Sacramento, California 95816 (United States); Department of Radiation Oncology, Wallace Tumor Institute WTI No. 117, University of Alabama at Birmingham, Birmingham, Alabama 35294 (United States)

2008-07-15T23:59:59.000Z

164

Future Fixed Target Facilities  

SciTech Connect (OSTI)

We review plans for future fixed target lepton- and hadron-scattering facilities, including the 12 GeV upgraded CEBAF accelerator at Jefferson Lab, neutrino beam facilities at Fermilab, and the antiproton PANDA facility at FAIR. We also briefly review recent theoretical developments which will aid in the interpretation of the data expected from these facilities.

Melnitchouk, Wolodymyr

2009-01-01T23:59:59.000Z

165

Hetero-epitaxial EuO interfaces studied by analytic electron microscopy  

SciTech Connect (OSTI)

With nearly complete spin polarization, the ferromagnetic semiconductor europium monoxide could enable next-generation spintronic devices by providing efficient ohmic spin injection into silicon. Spin injection is greatly affected by the quality of the interface between the injector and silicon. Here, we use atomic-resolution scanning transmission electron microscopy in conjunction with electron energy loss spectroscopy to directly image and chemically characterize a series of EuO|Si and EuO|YAlO{sub 3} interfaces fabricated using different growth conditions. We identify the presence of europium silicides and regions of disorder at the EuO|Si interfaces, imperfections that could significantly reduce spin injection efficiencies via spin-flip scattering.

Mundy, Julia A. [School of Applied and Engineering Physics, Cornell University, Ithaca, New York 14853 (United States); Hodash, Daniel; Melville, Alexander; Held, Rainer [Department of Materials Science and Engineering, Cornell University, Ithaca, New York 14853 (United States); Mairoser, Thomas; Schmehl, Andreas [Zentrum für Elektronische Korrelationen und Magnetismus, Universität Augsburg, Universitätsstraße 1, D-86159 Augsburg (Germany); Muller, David A.; Kourkoutis, Lena F. [School of Applied and Engineering Physics, Cornell University, Ithaca, New York 14853 (United States); Kavli Institute at Cornell for Nanoscale Science, Ithaca, New York 14853 (United States); Schlom, Darrell G. [Department of Materials Science and Engineering, Cornell University, Ithaca, New York 14853 (United States); Kavli Institute at Cornell for Nanoscale Science, Ithaca, New York 14853 (United States)

2014-03-03T23:59:59.000Z

166

ISAC target vacuum system  

SciTech Connect (OSTI)

The Isotope Separator and Accelerator (ISAC) facility at TRIUMF has been in full operation since 1999. The ISAC east and west targets use proton beam from the cyclotron to produce various radioactive isotopes, which are then ionized and extracted. The ions are then passed through the mass separator and selected ions are transferred to the low energy experiments or injected into a radio frequency quadrupole accelerator. The accompanying radioactive contamination from the production of radioactive ions requires a complex vacuum system. The main target vacuum space consists of two semiseparate (primary and secondary) volumes pumped by turbo-molecular pumps. The primary volume uses four pumps while the secondary volume uses two pumps. Two hermetic rotary vane pumps are used as backing pumps. The nominal vacuum in both volumes is about 1.33x10{sup -4} Pa (1.0x10{sup -6} Torr). The pressure is monitored by two cold cathode and two hot filament ion gauges. The cold cathode gauges are used to interlock the system, which is critical during the bake out of the target and beam production. The exhaust gas from the vacuum pumps can be radioactive. Three gas storage tanks (decay tanks) are used for temporary storage of the radioactive exhaust and its controlled release to the atmosphere. Gas-species insensitive membrane gauges are used for monitoring the pressure in the storage tanks. This article describes the details of the ISAC target vacuum system as well as some procedures related to the handling of the exhaust gas with traces of radioactive contamination produced by the targets.

Yosifov, Dimo; Sekachev, Igor [TRIUMF, Canada's National Laboratory for Particle and Nuclear Physics, Vancouver, British Columbia V6T 2A3 (Canada)

2006-07-15T23:59:59.000Z

167

Solid Target Options S. Childress  

E-Print Network [OSTI]

power is higher than for existing solid target designs - but not by a large factor. · NuMI graphite beam power) · High beam power solid targets frequently use higher z materials for increased yield plusSolid Target Options NuFACT'00 S. Childress Solid Target Options · The choice of a primary beam

McDonald, Kirk

168

New Nissan Paint Plant Achieves 30% Energy Savings | Department...  

Broader source: Energy.gov (indexed) [DOE]

New Nissan Paint Plant Achieves 30% Energy Savings New Nissan Paint Plant Achieves 30% Energy Savings May 6, 2013 - 5:55pm Addthis New Nissan Paint Plant Achieves 30% Energy...

169

EU promises new biofuel rules won't harm the environment http://www.pr-inside.com/eu-promises-new-biofuel-rules-won-t-r385258.htm 1 of 2 1/16/2008 12:32 PM  

E-Print Network [OSTI]

EU promises new biofuel rules won't harm the environment http://www.pr-inside.com/eu-promises-new-biofuel promises new biofuel rules won't harm the environment © AP 2008-01-14 16:21:49 - BRUSSELS, Belgium (AP) - The European Union promised Monday that its new push to promote biofuels will try to prevent harming

170

Elastic and anelastic relaxations associated with phase transitions in EuTiO3  

E-Print Network [OSTI]

resonance peaks are totally attenuated (superattenuation). The pinning process is still complete by ~400 K, however. 42 If the twin walls in EuTiO3 are subject to pinning by oxygen vacancies as in LaAlO3, it is likely that their freezing interval will also... resonance peaks are totally attenuated (superattenuation). The pinning process is still complete by ~400 K, however. 42 If the twin walls in EuTiO3 are subject to pinning by oxygen vacancies as in LaAlO3, it is likely that their freezing interval will also...

Spalek, Leszek J.; Saxena, Siddharth S.; Panagopoulos, Christos; Katsufuji, Takuro; Schiemer, Jason A.; Carpenter, Michael A.

2014-08-29T23:59:59.000Z

171

Achieving the Benefits of Safeguards by Design  

SciTech Connect (OSTI)

The overarching driver for developing a formalized process to achieve safeguards by design is to support the global growth of nuclear power while reducing ‘nuclear security’ risks. This paper discusses an institutional approach to the design process for a nuclear facility, for designing proliferation resistance, international safeguards and U.S. national safeguards and security into new nuclear facilities. In the United States, the need exists to develop a simple, concise, formalized, and integrated approach for incorporating international safeguards and other non-proliferation considerations into the facility design process. An effective and efficient design process is one which clearly defines the functional requirements at the beginning of the project and provides for the execution of the project to achieve a reasonable balance among competing objectives in a cost effective manner. Safeguards by Design is defined as “the integration of international and national safeguards, physical security and non-proliferation features as full and equal partners in the design process of a nuclear energy system or facility,” with the objective to achieve facilities that are intrinsically more robust while being less expensive to safeguard and protect. This Safeguards by Design process has been developed such that it: • Provides improved safeguards, security, and stronger proliferation barriers, while reducing the life cycle costs to the operator and regulatory agencies, • Can be translated to any international context as a model for nuclear facility design, • Fosters a culture change to ensure the treatment of ‘nuclear security’ considerations as “full and equal” partners in the design process, • Provides a useful tool for the project manager responsible for the design, construction, and start-up of nuclear facilities, and • Addresses the key integration activities necessary to efficiently incorporate International Atomic Energy Agency safeguards into the design of nuclear facilities. This paper describes the work that has been completed in the development of a Safeguards by Design process for a project, illustrated by flow diagrams based upon the project phases described in U.S. Department of Energy Order 413.3A, Program and Project Management for the Acquisition of Capital Assets. The institutionalization of the Safeguards by Design process directly supports the goals of the Next Generation Safeguards Initiative and also aligns with goals and objectives of the International Atomic Energy Agency. Other benefits from institutionalizing this Safeguards by Design process are discussed within this paper.

Trond Bjornard; Robert Bean; David Hebditch; Jim Morgan; Bruce Meppen; Scott DeMuth; Michael Ehinger; John Hockert

2008-07-01T23:59:59.000Z

172

China's Pathways to Achieving 40percent 45percent Reduction in CO2 Emissions per Unit of GDP in 2020: Sectoral Outlook and Assessment of Savings Potential  

E-Print Network [OSTI]

goal of reducing its carbon intensity (CO 2 per unit of GDP)to achieve the 2020 carbon intensity reduction target. Thecommitted to reduce its carbon intensity (CO 2 per unit of

Zheng, Nina

2013-01-01T23:59:59.000Z

173

High School Girls Honored for Math, Science Achievements at Sandia...  

Broader source: Energy.gov (indexed) [DOE]

High School Girls Honored for Math, Science Achievements at Sandia National Laboratory High School Girls Honored for Math, Science Achievements at Sandia National Laboratory May...

174

Dilute Clean Diesel Combustion Achieves Low Emissions and High...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Dilute Clean Diesel Combustion Achieves Low Emissions and High Efficiency While Avoiding Control Problems of HCCI Dilute Clean Diesel Combustion Achieves Low Emissions and High...

175

Marine Corps Base Quantico Achieves 85% Savings in Parking Lighting...  

Energy Savers [EERE]

Marine Corps Base Quantico Achieves 85% Savings in Parking Lighting Marine Corps Base Quantico Achieves 85% Savings in Parking Lighting Marine Corps Base Quantico (MCBQ) in...

176

Advanced Mixed Waste Treatment Project Achieves Impressive Safety...  

Office of Environmental Management (EM)

Advanced Mixed Waste Treatment Project Achieves Impressive Safety and Production Marks Advanced Mixed Waste Treatment Project Achieves Impressive Safety and Production Marks June...

177

Dynalene Fuel Cell Coolants Achieve Commercial Success | Department...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Dynalene Fuel Cell Coolants Achieve Commercial Success Dynalene Fuel Cell Coolants Achieve Commercial Success August 26, 2014 - 12:34pm Addthis Dynalene Inc. of Whitehall,...

178

Combined Heat and Power System Achieves Millions in Cost Savings...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Achieves Millions in Cost Savings at Large University - Case Study, 2013 Combined Heat and Power System Achieves Millions in Cost Savings at Large University - Case Study, 2013...

179

Challenges and Opportunities To Achieve 50% Energy Savings in...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

and Opportunities To Achieve 50% Energy Savings in Homes: National Laboratory White Papers Challenges and Opportunities To Achieve 50% Energy Savings in Homes: National...

180

Proceedings from the Wind Manufacturing Workshop: Achieving 20...  

Office of Environmental Management (EM)

Proceedings from the Wind Manufacturing Workshop: Achieving 20% Wind Energy in the U.S. by 2030, May 2009 Proceedings from the Wind Manufacturing Workshop: Achieving 20% Wind...

Note: This page contains sample records for the topic "achieving eu targets" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Los Angeles County's Green Idea House Achieves Efficient Goals...  

Broader source: Energy.gov (indexed) [DOE]

Los Angeles County's Green Idea House Achieves Efficient Goals Los Angeles County's Green Idea House Achieves Efficient Goals Photo of an energy-efficient home with modern...

182

Achieving Sustainability inCalifornia’s CentralValley  

E-Print Network [OSTI]

of agricultural sustainability. ” Agriculture, Ecosystems &19, 2009. Achieving Sustainability in California’s Centralvariables. Achieving Sustainability in California’s Central

Lubell, Mark; Beheim, Bret; Hillis, Vicken; Handy, Susan L.

2009-01-01T23:59:59.000Z

183

Application of Synergistic Technologies to Achieve High Levels...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Synergistic Technologies to Achieve High Levels of Gasoline Engine Downsizing Application of Synergistic Technologies to Achieve High Levels of Gasoline Engine Downsizing Discussed...

184

Achieving and Demonstrating FreedomCAR Engine Fuel Efficiency...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Achieving and Demonstrating FreedomCAR Engine Fuel Efficiency Goals (Agreement 13704) Achieving and Demonstrating FreedomCAR Engine Fuel Efficiency Goals (Agreement 13704)...

185

Building America Expert Meeting Report: Achieving the Best Installed...  

Broader source: Energy.gov (indexed) [DOE]

Achieving the Best Installed Performance from High-Efficiency Residential Gas Furnaces Building America Expert Meeting Report: Achieving the Best Installed Performance from...

186

Achieve smokeless flaring -- Air or steam assist?  

SciTech Connect (OSTI)

Because of the technological advances made during the past several years, flare system design has become more important with respect to the economics of plant operation. There are many options available to the engineer during the initial design phase of a flare system for a chemical process industries (CPI) plant. An earlier CEP article covered the basics of flare design and how to choose and size the right equipment, such as stack height and diameter, tip design, pilots and pilots flame detectors, seals, and so on. One of the most important factors is how to achieve smokeless operation, which is accomplished by either steam-assisted or air-assisted elevated flare stack assemblies. This article compares the two approaches and outlines the advantages and disadvantages of each with respect to economics, practicality, and operability. Table 1 summarizes the data for a typical plant in the U.S. Gulf Coast area that will be used as the basis for comparing costs.

Chaudhuri, M.; Diefenderfer, J.J.

1995-06-01T23:59:59.000Z

187

Achieving a "SIL 1" TCR Monitoring System  

E-Print Network [OSTI]

SIL 1 (Safety Integrity Level 1) refers to the quantification and measurement of the availability, reliability, maintenance and safety of the monitoring system. In the last few years the computer infrastructure used to acquire and to diffuse data to the TCR has evolved very rapidly. A number of measures in hardware, software and management have been introduced to cope with this situation. These include: the Multipurpose Monitoring Device (MMD), a standard data acquisition platform used in the renovation of old front end monitoring equipment, the Smart Equipment Controller (Dsec), a driver that reduces the layers in the data diffusion pyramid, the multiplatform monitoring software to integrate the different SCADA systems, a software configuration tool (RAZOR) for problem tracking and version control, and a complete development environment reproducing a real installation for thorough testing of any changes. To achieve SIL 1 objectives, while mastering the evolution of our systems will be the challenge for the c...

Bartolomé, R; Scibile, L; Grau, S

2001-01-01T23:59:59.000Z

188

Accelerator-based fusion with a low temperature target  

SciTech Connect (OSTI)

Neutron generators are in use in a number of scientific and commercial endeavors. They function by triggering fusion reactions between accelerated ions (usually deuterons) and a stationary cold target (e.g., containing tritium). This setup has the potential to generate energy. It has been shown that if the energy transfer between injected ions and target electrons is sufficiently small, net energy gain can be achieved. Three possible avenues are: (a) a hot target with high electron temperature, (b) a cold non-neutral target with an electron deficiency, or (c) a cold target with a high Fermi energy. A study of the third possibility is reported in light of recent research that points to a new phase of hydrogen, which is hypothesized to be related to metallic hydrogen. As such, the target is considered to be composed of nuclei and delocalized electrons. The electrons are treated as conduction electrons, with the average minimum excitation energy being approximately equal to 40% of the Fermi energy. The Fermi energy is directly related to the electron density. Preliminary results indicate that if the claimed electron densities in the new phase of hydrogen were achieved in a target, the energy transfer to electrons would be small enough to allow net energy gain.

Phillips, R. E.; Ordonez, C. A. [Department of Physics, University of North Texas, Denton, Texas 76203-5017 (United States)

2013-04-19T23:59:59.000Z

189

A Year of Exceptional Achievements FY 2008  

SciTech Connect (OSTI)

2008 highlights: (1) Stockpile Stewardship and Complex Transformation - LLNL achieved scientific breakthroughs that explain some of the key 'unknowns' in nuclear weapons performance and are critical to developing the predictive science needed to ensure the safety, reliability, and security of the U.S. nuclear deterrent without nuclear testing. In addition, the National Ignition Facility (NIF) passed 99 percent completion, an LLNL supercomputer simulation won the 2007 Gordon Bell Prize, and a significant fraction of our inventory of special nuclear material was shipped to other sites in support of complex transformation. (2) National and Global Security - Laboratory researchers delivered insights, technologies, and operational capabilities that are helping to ensure national security and global stability. Of particular note, they developed advanced detection instruments that provide increased speed, accuracy, specificity, and resolution for identifying and characterizing biological, chemical, nuclear, and high-explosive threats. (3) Exceptional Science and Technology - The Laboratory continued its tradition of scientific excellence and technical innovation. LLNL scientists made significant contributions to Nobel Prize-winning work on climate change. LLNL also received three R&D 100 awards and six Nanotech 50 awards, and dozens of Laboratory scientists and engineers were recognized with professional awards. These honors provide valuable confirmation that peers and outside experts recognize the quality of our staff and our work. (4) Enhanced Business and Operations - A major thrust under LLNS is to make the Laboratory more efficient and cost competitive. We achieved roughly $75 million in cost savings for support activities through organizational changes, consolidation of services, improved governance structures and work processes, technology upgrades, and systems shared with Los Alamos National Laboratory. We realized nonlabor cost savings of $23 million. Severe fiscal constraints necessitated a major workforce restructuring and reduction.

devore, L; Chrzanowski, P

2008-11-06T23:59:59.000Z

190

Tuesday April 12, 8:14 PM LEAD: Japan, EU aim to reach conclusion on ITER by July  

E-Print Network [OSTI]

Tuesday April 12, 8:14 PM LEAD: Japan, EU aim to reach conclusion on ITER by July (Kyodo) _ (EDS." Earlier in the day, Potocnik met with Japan's Education, Culture, Sports, Science and Technology Minister: UPDATING WITH EU COMMISSIONER'S PRESS CONFERENCE) Japan and the European Union agreed Tuesday to speed up

191

Forschung und EU-Hochschulbro, Technologietransfer Anschrift: Brhlstr. 27 30169 Hannover Tel.: (0511) 762 4091 Fax: 3009 dezernat4@zuv.uni-hannover.de  

E-Print Network [OSTI]

for a Greener Agriculture (ERA-Net ICT-AGRI) 12 6.1.2. EU/BMELV: Transnationale Projekte im Bereich Bioenergie 10. Agrarwissenschaften 17 10.1.1. EU/BMELV: Transnationale Projekte im Bereich "Agricultural Umweltschutzprojekten 17 11.1.2. EU/BMELV: ICT and Automation for a Greener Agriculture (ERA-Net ICT-AGRI) 18 11.1.3. EU

Nejdl, Wolfgang

192

A Non-Aqueous Reduction Process for Purifying 153Gd Produced in Natural Europium Targets  

SciTech Connect (OSTI)

Gadolinium-153 is a low-energy gamma-emitter used in nuclear medicine imaging quality assurance. Produced in nuclear reactors using natural Eu2O3 targets, 153Gd is radiochemically separated from europium isotopes by europium reduction. However, conventional aqueous europium reduction produces hydrogen gas, a flammability hazard in radiological hot cells. We altered the traditional reduction method, using methanol as the process solvent to nearly eliminate hydrogen gas production. This new, non-aqueous reduction process demonstrates greater than 98% europium removal and gadolinium yields of 90%.

Johnsen, Amanda M.; Soderquist, Chuck Z.; McNamara, Bruce K.; Fisher, Darrell R.

2013-08-01T23:59:59.000Z

193

Water Research 39 (2005) 239247 Biosorption of La, Eu and Yb using Sargassum biomass  

E-Print Network [OSTI]

Water Research 39 (2005) 239­247 Biosorption of La, Eu and Yb using Sargassum biomass Vivian Diniz-loaded biomass was studied. The ion exchange sorption mechanism was confirmed by the release of calcium ions from the biomass that matched the total number of metal and protons removed from the solution. The metal binding

Volesky, Bohumil

194

An EIE/Altener project Co-funded by the EU Commission  

E-Print Network [OSTI]

of the biogas production by centralised co-digestion in selected areas of six EU countries. The assessment Assessment of a Centralised co-digestion Plant hypothetically sited in Sprimont, Walloon Region Belgium June industries which leads to a lack of good quality biomass to feed the digester (low methane potential), - long

195

Spectroscopy of Eu3+ ions in congruent strontium barium niobate crystals  

E-Print Network [OSTI]

Spectroscopy of Eu3+ ions in congruent strontium barium niobate crystals Ã?. Andresen, A.-N. Bahar properties of single crystals of strontium barium niobate, grown from the congruently melting composition, electro-optic, pho- torefractive, and dielectric properties, the solid solution strontium barium niobate

Osnabrück, Universität

196

The Political Business Cycles in the EU enlarged 1 Mathilde Maurel2  

E-Print Network [OSTI]

1 The Political Business Cycles in the EU enlarged 1 Mathilde Maurel2 1. Politics and business by limiting the room for political adjustment, others considered that the process of enlargement was a way that the process of monetary unification is an endogenous process. Once the political decision of entering a common

Paris-Sud XI, Université de

197

Nuclear forward scattering vs. conventional Mossbauer studies of atomically tailored Eu-based materials.  

SciTech Connect (OSTI)

With the decrease in size of devices, rapid characterization of nano-devices is an inevitable necessity. It is shown that Moessbauer spectroscopy using synchrotron radiation from the advanced photon source provides such a tool of investigation. Results are presented and compared for conventional Moessbauer and Nuclear Forward Scattering for {sup 151}Eu-doped magnesium sulfide as an example, especially at low concentrations.

Konjhodzic, A.; Adamczyk, A.; Hasan, Z.; Alp, E. E.; Sturhahn, W.; Zhao, J.; Carroll, J. J.; Vagizov, F.; Univ. of Philadelphia; Youngstown State Univ.

2006-01-01T23:59:59.000Z

198

Reforming the EU: The Future of European Law and Policy IV CONFERENCE PROGRAMME  

E-Print Network [OSTI]

of Cardiff Collective Redress: a Change in the Framework of EU Law Rights' Protection of International Law in the Court of Justice of the European Union: Rupert Dunbar Workshops 2: Thursday 26 June 2014, 3.30-5.00 pm 2A: Investment, Law Moot Room

Birmingham, University of

199

A nuclear magnetic resonance probe of Fe-Al and Al20V2Eu intermetallics  

E-Print Network [OSTI]

Al-rich Fe-Al systems (FeAl2, Fe2 Al5 and Fe4Al13) and Al20V2Eu have complicated structures with quasicrystal-like features making these materials potentially of interest for magnetic behavior. However, there is not much work on these materials...

Chi, Ji

2009-05-15T23:59:59.000Z

200

CARBON LEAKAGE AND CAPACITY-BASED ALLOCATIONS. IS THE EU RIGHT?  

E-Print Network [OSTI]

petroleum...). Three main approaches have been proposed: output based allocation (Aus- tralia, California makes the dierence. A calibration of the model is used to evaluate the EU scheme for the cement sec- tor and Business Economics (Guy Meunier and Jean-Pierre Ponssard). 1 hal-00672907,version1-22Feb2012 #12

Paris-Sud XI, Université de

Note: This page contains sample records for the topic "achieving eu targets" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Preprint 24th EU PVSEC, 2009, Hamburg FITTING OF LATERAL RESISTANCES IN SILICON SOLAR CELLS  

E-Print Network [OSTI]

Preprint 24th EU PVSEC, 2009, Hamburg FITTING OF LATERAL RESISTANCES IN SILICON SOLAR CELLS cell from electroluminescence (EL) is introduced. A two-dimensional model of the solar cell screen printed monocrystalline silicon solar cell are shown and the influence of lateral diffusion

Junk, Michael

202

Promoting electricity from renewable energy sources -- lessons learned from the EU, U.S. and Japan  

E-Print Network [OSTI]

sustainable growth of the renewable energy industry. Thegrowth of QF capacity, which included renewables, was astounding, aided by California’s diverse and abundant renewable energyrenewable generation, the EU has assumed this role since 2002, mostly due to a rapid growth of wind energy.

Haas, Reinhard

2008-01-01T23:59:59.000Z

203

Occupancy and site distribution of europium in barium magnesium aluminate Eu Mossbauer spectroscopy  

E-Print Network [OSTI]

as a blue emitting phosphor in various lighting applications. The 4f6 5d4f7 transition of Eu2 Therefore improving the stability of BAM is one of the im- portant concerns for the lighting industries.2 for fluorescent lamps with a high color rendering index. In comparison to the red and green emitting phos- phors

Boolchand, Punit

204

Eos,Vol. 85, No. 46, 16 November 2004 use among European Union (EU) member  

E-Print Network [OSTI]

Eos,Vol. 85, No. 46, 16 November 2004 use among European Union (EU) member states applications of the atlas contents should have no problem doing so. The price of the atlas is a hefty $310 the substantial amount of information contained within the atlas,the price represents a good value,and university

Wang, Chunzai

205

-News Home Help EU again warns could mount nuclear project without Japan  

E-Print Network [OSTI]

revealed. news web sites The European Commission ( - ) is set to propose that negotiating strategy next the International Thermonuclear Experimental Reactor (ITER). news web sites Talks in Vienna on Tuesday made some support the Japanese bid -- and Russia and China, which back the EU bid. news web sites Ambassadors from

206

-News Home Help EU offers 'sweetener' to Japan to let France host nuclear project  

E-Print Network [OSTI]

to host a revolutionary nuclear fusion project. news web sites "I cannot elaborate on the sweetener, but I Wednesday after talks in Vienna on the International Thermonuclear Experimental Reactor (ITER). news web ( - ) -- which have supported the Japanese bid -- plus Russia and China, which back the EU bid.news web sites

207

pEtrolEuM EnginEEring College of Engineering and Mines  

E-Print Network [OSTI]

pEtrolEuM EnginEEring College of Engineering and Mines Department of Petroleum Engineering 907-474-7734 http://cem.uaf.edu/pete/ MS Degree Minimum Requirements for Degree: 30 ­ 36 credits Petroleum engineering offers a unique look at the challenging problems confronting the petroleum industry. This program

Hartman, Chris

208

The knowledge economy in Europe A report prepared for the 2007 EU Spring Council  

E-Print Network [OSTI]

The knowledge economy in Europe A report prepared for the 2007 EU Spring Council Prepared by Ian. Knowledge industry employment in Europe 6 4. Moving towards a knowledge based economy in Europe 7 5 10 8. Investing in knowledge 11 9. Next steps 23 Sponsors for the knowledge economy programme include

Chen-Burger, Yun-Heh (Jessica)

209

MARKETING APPLICATIONS: International Marketing, Marketing in the EU and Tourism Marketing  

E-Print Network [OSTI]

MARKETING APPLICATIONS: International Marketing, Marketing in the EU and Tourism Marketing Summer Union and Tourism Marketing Professors Juan L. Nicolau. University of Alicante. JL.Nicolau@ua.es María principles: 1) Tourism Marketing, which focuses on the tourism marketing and its singular traits, explores

Escolano, Francisco

210

EU Informal Competitiveness Council (Ian Lucas, Parliamentary Under-Secretary (Business and Regulatory  

E-Print Network [OSTI]

. At the industry session on 15 October, the presidency hosted a discussion on eco-efficiency from a competitiveness suggested that EU member states should take a global lead in promoting growth and jobs through an eco-efficient to be strengthened and that the mandate of the Centre for Renewable Energy Systems Technology (CREST) advisory

211

EU to build experimental fusion reactor Associated Press, THE JERUSALEM POST Sep 25, 2006  

E-Print Network [OSTI]

EU to build experimental fusion reactor Associated Press, THE JERUSALEM POST Sep 25, 2006 European Union nations on Monday endorsed a pact to build an experimental fusion reactor with the aim, China, Japan, South Korea and Russia - also aim to ratify the International Thermonuclear Experimental

212

An EIE/Altener project Co-funded by the EU Commission  

E-Print Network [OSTI]

and energy aspects of the biogas production by centralised co-digestion in selected areas of six EU countries. The assessment will provide incentives for the implementation of biogas systems in those areas and will help-technical barriers for the implementation and development of biogas from centralised co-digestion in the studied

213

An EIE/Altener project Co-funded by the EU Commission  

E-Print Network [OSTI]

, environmental and energy aspects of the biogas production by centralised co-digestion in selected areas of six EU countries. The assessment will provide incentives for the implementation of biogas systems for the implementation and development of biogas from centralised co-digestion in the studied areas and to propose some

214

GEE Workshop, Mnchen, 6 Juni 2008 The EU Policy Framework for the Promotion  

E-Print Network [OSTI]

production but also distribution and end-use pose enormous challenges ­ Hydrogen and fuel cells are still to hydrogen and fuel cell development ­ Regional dimension/cluster policy We therefore address the following questions ­ To what extent is the current EU policy framework conducive to hydrogen and fuel cell

215

Presentation 1.1: An overview of existing and emerging EU policies relating to energy from biomass and their effects on forest based industries  

E-Print Network [OSTI]

products and wood-energy markets. Bearing in mind present EU forest resources and trends, the scope debate. 25 #12;International Seminar on Energy & the Forest Products' Industry FAO HQ, Rome, 30, Energy & Environment EU forest-based sector ­ NB no EU sectoral policy Communication on implementing

216

THE EFFECTS OF FLAME TEMPERATURE, PARTICLE SIZE AND EUROPIUM DOPING CONCENTRATION ON THE PROPERTIES OF Y2O3:EU PARTICLES FORMED IN A FLAME AEROSOL PROCESS  

E-Print Network [OSTI]

Y2O3:Eu particles are phosphors that have found wide applications. Flamesynthesized Y2O3:Eu particles may have either the cubic or the monoclinic structure. The effects of particle size and Eu doping concentration on crystal structure...

Yim, Hoon

2010-07-14T23:59:59.000Z

217

Structural Properties of Eu-Doped GaN Investigated by Raman Spectroscopy  

SciTech Connect (OSTI)

Rare-earth (RE) impurities doped GaN are highly promising candidates for light emitting device applications due to their efficient electroluminescence properties at room temperature. Among those, Eu doped GaN has been identified as an excellent material for the red spectral region due to its strong emission at 620 nm. As a transition internal to the Eu doping atom (4f-4f), light emission originates in a much smaller complex than the more flexibly controllable quantum structures of wells, wires, and dots. This is thought to make the center less susceptible to structural defects and in particular radiation damage in the lattice host. Nevertheless, the lattice host is crucial for providing the excitation in from of free electrons and holes. In this respect, the actual lattice site Eu occupies in the host lattice, i.e. in GaN, is important. A large fraction of Eu atoms are typically inactive which must be attributed to their lattice site and local environment. GaN films implanted with Eu to concentrations of {approx}10{sup 18} cm{sup -3} were subjected to a highly directed beam of 500 keV He{sup +} at a dose of 5 x 10{sup 14} cm{sup -2}. By means of a shadow mask, irradiated and unexposed regions lie very close to each other on the same sample. We used optical and structural analysis to identify the exerted radiation damage. At the full radiation dose, photoluminescence intensity has decayed to {approx}0.01 of its initial value. From the dose dependence of the radiation decay we previously concluded, that this decay is in part due to the destruction of radiative Eu sites [J.W. Tringe, unpublished (2006)]. Along the transition from virgin to irradiated material we analyze the accumulated damage in terms of surface morphology (atomic force microscopy), crystallinity (x-ray diffraction), and phonon dispersion using micro-Raman spectroscopy. In addition to the well-studied E{sub 2}(high) mode, two new vibrational modes at 659 cm{sup -1} and 201 cm{sup -1} were observed in the Eu implanted and annealed sample, prior to He{sup +} irradiation. These modes are either remnants of the implantation damage or related to the Eu impurity. As such they can be indicative of the actual lattice site the Eu atom resides on. After irradiation, broad Raman modes at 300 cm-1 are being observed. This band indicates disorder activated Raman scattering (DARS) due to the radiation damage. An additional narrow mode appears at 672 cm{sup -1}, which can possibly be due to a nitrogen vacancy related vibrational mode. The continuous transition from irradiated to un-irradiated sample allows the direct evolution of radiation damage and its coordinated effects in structural, optical and vibrational properties. By its systematic correlation we anticipate to be able to elucidate the Eu lattice interaction and the processes of radiation damage.

Senawiratne, J; Xia, Y; Detchprohm, T; Tringe, J W; Stevens, C G; Wetzel, C

2006-06-20T23:59:59.000Z

218

Flight Path Target 2  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary)morphinanInformation Desert Southwest Region service area. TheEPSCI HomeTours, Programs and2 This flight2 Target 2

219

Advanced Target Effects Modeling  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth (AOD)ProductssondeadjustsondeadjustAbout the BuildingInnovation PortalScience of SignaturesAdvanced Target

220

Requirements for low cost electricity and hydrogen fuel production from multi-unit intertial fusion energy plants with a shared driver and target factory  

E-Print Network [OSTI]

achieving low CoE for hydrogen production. Although other WEfor competitive hydrogen production, such advanced targetsElectricity and Hydrogen Fuel Production from Multi-Unit

Logan, B. Grant; Moir, Ralph; Hoffman, Myron A.

1994-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "achieving eu targets" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Rotating Target Development for SNS Second Target Station  

SciTech Connect (OSTI)

A rotating target for the second target station (STS) at SNS has been identified as an option along with a mercury target. Evaluation of the rotating target alternative for STS has started at 1.5 MW which is considered an upper bound for the power. Previous preconceptual design work for a 3 MW rotating target is being modified for the lower power level. Transient thermal analysis for a total loss of active water cooling has been done for a simplified 2D model of the target and shielding monolith which shows that peak temperatures are well below the level at which tungsten vaporization by steam could exceed site boundary dose limits. Design analysis and integration configuration studies have been done for the target-moderator-reflector assembly which maximizes the number of neutron beam lines and provides for replacement of the target and moderators. Target building hot cell arrangement for this option will be described. An option for operation in rough vacuum without a proton beam window using Ferro fluid seals on a vertical shaft is being developed. A full scale prototypic drive module based on the 3 MW preconceptual design has been fabricated and successfully tested with a shaft and mock up target supplied by the ESS-Bilbao team. Overall planning leading to decision between mercury and the rotating target in 2011 will be discussed

McManamy, Thomas J [ORNL; Rennich, Mark J [ORNL; Crawford, Roy K [ORNL; Geoghegan, Patrick J [ORNL; Janney, Jim G [ORNL

2010-01-01T23:59:59.000Z

222

Structure and physical properties of EuTa{sub 2}O{sub 6} tungsten bronze polymorph  

SciTech Connect (OSTI)

A tetragonal tungsten bronze (TTB) polymorph of EuTa{sub 2}O{sub 6} was prepared and analyzed. EuTa{sub 2}O{sub 6} crystallizes in the centrosymmetric Pnam space group (with unit cell: a?=?12.3693, b?=?12.4254, and c?=?7.7228?Å) isomorphous with orthorhombic ?-SrTa{sub 2}O{sub 6}. In contrast to early reports, we see no evidence of deviation from paramagnetic Curie-Weiss behavior among the Eu{sup 2+} 4f{sup 7}spins in EuTa{sub 2}O{sub 6} down to 2?K. Dielectric constant shows a broad peak at ca. 50?K with dielectric dispersion resembling diffuse phase transition. The relaxation time, however, follows a simple (non-freezing) thermally activated process with an activation energy of 92?meV and an attempt frequency of f{sub 0}?=?5.79?×?10{sup 12?}Hz. A thermal conductivity of EuTa{sub 2}O{sub 6} shows a low-temperature (T???30?K) “plateau” region reminiscent of a glass-like behaviour in Nb-based TTB compounds. This behaviour can be attributed to the loosely bound Eu{sup 2+} ions occupying large tricapped trigonal prismatic sites in the EuTa{sub 2}O{sub 6} structure.

Kolodiazhnyi, T., E-mail: kolodiazhnyi.taras@nims.go.jp; Sakurai, H.; Vasylkiv, O.; Borodianska, H. [National Institute for Materials Science, Tsukuba, Ibaraki 305-0044 (Japan); Forbes, S.; Mozharivskyj, Y. [Department of Chemistry and Chemical Biology, McMaster University, 1280 Main Street West, Hamilton, Ontario L8S4M1 (Canada)

2014-08-11T23:59:59.000Z

223

Thermal neutron diffraction determination of the magnetic structure of EuCu{sub 2}Ge{sub 2}  

SciTech Connect (OSTI)

The magnetic structure of EuCu{sub 2}Ge{sub 2} has been determined by flat-plate neutron powder diffraction. Two magnetic phases are present in the neutron diffraction pattern at 3.5?K. They have the same moment, within error, and a common transition temperature. Both {sup 151}Eu and {sup 153}Eu Mössbauer spectroscopy show that the two magnetic phases belong to the same crystallographic phase. Both phases can be modelled by planar helimagnetic structures: one with a propagation vector of [0.654(1), 0, 0], the other with a propagation vector of [0.410(1), 0.225(1), 0].

Rowan-Weetaluktuk, W. N.; Ryan, D. H., E-mail: dhryan@physics.mcgill.ca [Department of Physics, and Centre for the Physics of Materials, McGill University, 3600 University Street, Montreal, Quebec H3A 2T8 (Canada); Lemoine, P. [Laboratoire CRISMAT, ENSICAEN, UMR 6508 CNRS, 6 Boulevard du Maréchal Juin, 14050 Caen Cedex 4 (France); Cadogan, J. M. [School of Physical, Environmental and Mathematical Sciences, UNSW Canberra at the Australian Defence Force Academy, Canberra BC 2610 (Australia)

2014-05-07T23:59:59.000Z

224

PDFs for nuclear targets  

E-Print Network [OSTI]

Understanding nuclear effects in parton distribution functions (PDF) is an essential component needed to determine the strange and anti-strange quark contributions in the proton. In addition Nuclear Parton Distribution Functions (NPDF) are critically important for any collider experiment with nuclei (e.g. RHIC, ALICE). Here two next-to-leading order chi^2-analyses of NPDF are presented. The first uses neutral current charged-lepton Deeply Inelastic Scattering (DIS) and Drell-Yan data for several nuclear targets and the second uses neutrino-nucleon DIS data. We compare the nuclear corrections factors (F_2^Fe/F_2^D) for the charged-lepton data with other results from the literature. In particular, we compare and contrast fits based upon the charged-lepton DIS data with those using neutrino-nucleon DIS data.

Karol Kovarik

2010-06-25T23:59:59.000Z

225

ORION laser target diagnostics  

SciTech Connect (OSTI)

The ORION laser facility is one of the UK's premier laser facilities which became operational at AWE in 2010. Its primary mission is one of stockpile stewardship, ORION will extend the UK's experimental plasma physics capability to the high temperature, high density regime relevant to Atomic Weapons Establishment's (AWE) program. The ORION laser combines ten laser beams operating in the ns regime with two sub ps short pulse chirped pulse amplification beams. This gives the UK a unique combined long pulse/short pulse laser capability which is not only available to AWE personnel but also gives access to our international partners and visiting UK academia. The ORION laser facility is equipped with a comprehensive suite of some 45 diagnostics covering optical, particle, and x-ray diagnostics all able to image the laser target interaction point. This paper focuses on a small selection of these diagnostics.

Bentley, C. D.; Edwards, R. D.; Andrew, J. E.; James, S. F.; Gardner, M. D.; Comley, A. J.; Vaughan, K.; Horsfield, C. J.; Rubery, M. S.; Rothman, S. D.; Daykin, S.; Masoero, S. J.; Palmer, J. B.; Meadowcroft, A. L.; Williams, B. M.; Gumbrell, E. T.; Fyrth, J. D.; Brown, C. R. D.; Hill, M. P.; Oades, K. [Plasma Physics Department, Atomic Weapons Establishment, Aldermaston, Reading, Berkshire RG7 4PR (United Kingdom); and others

2012-10-15T23:59:59.000Z

226

Effects of Parameters on Nash Games with OSNR Target Department of Electrical and  

E-Print Network [OSTI]

Effects of Parameters on Nash Games with OSNR Target Yan Pan Department of Electrical and Computer of Electrical and Computer Engineering University of Toronto Toronto, ON M5S 3G4, Canada pavel of pric- ing mechanisms on system performance. We also show that OSNR target can be achieved

Pavel, Lacra

227

Hydrodynamic instabilities in beryllium targets for the National Ignition Facility  

SciTech Connect (OSTI)

Beryllium ablators offer higher ablation velocity, rate, and pressure than their carbon-based counterparts, with the potential to increase the probability of achieving ignition at the National Ignition Facility (NIF) [E. I. Moses et al., Phys. Plasmas 16, 041006 (2009)]. We present here a detailed hydrodynamic stability analysis of low (NIF Revision 6.1) and high adiabat NIF beryllium target designs. Our targets are optimized to fully utilize the advantages of beryllium in order to suppress the growth of hydrodynamic instabilities. This results in an implosion that resists breakup of the capsule, and simultaneously minimizes the amount of ablator material mixed into the fuel. We quantify the improvement in stability of beryllium targets relative to plastic ones, and show that a low adiabat beryllium capsule can be at least as stable at the ablation front as a high adiabat plastic target.

Yi, S. A., E-mail: austinyi@lanl.gov; Simakov, A. N.; Wilson, D. C.; Olson, R. E.; Kline, J. L.; Batha, S. H. [Los Alamos National Laboratory, P.O. Box 1663, Los Alamos, New Mexico 87545 (United States); Clark, D. S.; Hammel, B. A.; Milovich, J. L.; Salmonson, J. D.; Kozioziemski, B. J. [Lawrence Livermore National Laboratory, P.O. Box 808, Livermore, California 94551 (United States)

2014-09-15T23:59:59.000Z

228

Cognitive Research in GIScience: Recent Achievements and Future Prospects  

E-Print Network [OSTI]

Cognitive Research in GIScience: Recent Achievements and Future Prospects Daniel R. Montello achievements of cognitive research in geographic information science (GIScience) are reviewed and prospects for future directions discussed. Cognitive research in GIScience concerns human knowledge and knowing

Montello, Daniel R.

229

Air Force Achieves Fuel Efficiency through Industry Best Practices...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Air Force Achieves Fuel Efficiency through Industry Best Practices Air Force Achieves Fuel Efficiency through Industry Best Practices Fact sheet offers an overview of the U.S. Air...

230

Achieving Energy Efficiency Through Real-Time Feedback  

SciTech Connect (OSTI)

Through the careful implementation of simple behavior change measures, opportunities exist to achieve strategic gains, including greater operational efficiencies, energy cost savings, greater tenant health and ensuing productivity and an improved brand value through sustainability messaging and achievement.

Nesse, Ronald J.

2011-09-01T23:59:59.000Z

231

Achieving very low mercury levels in refinery wastewater by membrane filtration.  

SciTech Connect (OSTI)

Microfiltration (MF), ultrafiltration (UF), nanofiltration (NF) and reverse osmosis (RO) membranes were evaluated for their ability to achieve the world's most stringent Hg discharge criterion (<1.3 ng/L) in an oil refinery's wastewater. The membrane processes were operated at three different pressures to demonstrate the potential for each membrane technology to achieve the targeted effluent mercury concentrations. The presence of mercury in the particulate form in the refinery wastewater makes the use of MF and UF membrane technologies more attractive in achieving very low mercury levels in the treated wastewater. Both NF and RO were also able to meet the target mercury concentration at lower operating pressures (20.7 bar). However, higher operating pressures ({ge}34.5 bar) had a significant effect on NF and RO flux and fouling rates, as well as on permeate quality. SEM images of the membranes showed that pore blockage and narrowing were the dominant fouling mechanisms for the MF membrane while surface coverage was the dominant fouling mechanism for the other membranes. The correlation between mercury concentration and particle size distribution was also investigated to understand mercury removal mechanisms by membrane filtration. The mean particle diameter decreased with filtration from 1.1 {+-} 0.0 {micro}m to 0.74 {+-} 0.2 {micro}m after UF.

Urgun Demirtas, M.; Benda, P.; Gillenwater, P. S.; Negri, M. C.; Xiong, H.; Snyder, S. W. (Center for Nanoscale Materials); ( ES)

2012-05-15T23:59:59.000Z

232

Studies of the N=90 region: The decay of 154Eu to 154Gd  

SciTech Connect (OSTI)

The decay of {sup 154}Eu {yields} {sup 154}Gd has been studied by {gamma}-ray singles and {gamma}-{gamma} coincidence spectroscopy using an array of 20 Compton-suppressed Ge detectors. The primary goal of the work was to confirm or refute a large number of questionable features in the decay scheme: the outcome is the removal of 8 levels from the previously adopted scheme, with the result that a new type of collective band is revealed. Many weak decay branches for the decay are clarified. These results are critical for understanding the structure of {sup 154}Gd and the N = 90 isotones; and the improved completeness of the decay scheme contributes to the use of {sup 154}Eu as a metrological standard.

Kulp, W.D.; Wood, J.L.; Krane, K.S.; Loats, J.; Schmelzenbach, P.; Stapels, C.J.; Larimer, R.-M.; Norman, E.B.

2003-12-05T23:59:59.000Z

233

Photon Physics and Plasma Research, WILGA 2012; EuCARD Sessions  

E-Print Network [OSTI]

Wilga Sessions on HEP experiments, astroparticle physica and accelerator technology were organized under the umbrella of the EU FP7 Project EuCARD – European Coordination for Accelerator Research and Development. This paper is the third part (out of five) of the research survey of WILGA Symposium work, May 2012 Edition, concerned with Photon Physics and Plasma Research. It presents a digest of chosen technical work results shown by young researchers from different technical universities from this country during the Jubilee XXXth SPIE-IEEE Wilga 2012, May Edition, symposium on Photonics and Web Engineering. Topical tracks of the symposium embraced, among others, nanomaterials and nanotechnologies for photonics, sensory and nonlinear optical fibers, object oriented design of hardware, photonic metrology, optoelectronics and photonics applications, photonics-electronics co-design, optoelectronic and electronic systems for astronomy and high energy physics experiments, JET tokamak and pi-of-the sky experiments ...

Romaniuk, R S

2012-01-01T23:59:59.000Z

234

Over-allocation or abatement? : a preliminary analysis of the EU ETS based on the 2005 emission data  

E-Print Network [OSTI]

This paper provides an initial analysis of the EU ETS based on the installation-level data for verified emissions and allowance allocations in the first trading year. Those data, released on May 15, 2006, and subsequent ...

Ellerman, A. Denny

2006-01-01T23:59:59.000Z

235

First evidence of asymmetric cost pass-through of Eu emissions allowances : examining wholesale electricity prices in Germany  

E-Print Network [OSTI]

This paper applies the literature on asymmetric price transmission to the emerging commodity market for EU emissions allowances (EUA). We utilize an error correction model and an autoregressive distributed lag model to ...

Zachmann, Georg

2007-01-01T23:59:59.000Z

236

Comparison of the Evolution of Energy Intensity in Spain and in the EU15. Why is Spain Different?  

E-Print Network [OSTI]

Energy intensity in Spain has increased since 1990, while the opposite has happened in the EU15. Decomposition analysis of primary energy intensity ratios has been used to identify which are the key sectors driving the ...

Ocaña, Carlos

237

Over-Allocation or Abatement? A Preliminary Analysis of the EU Emissions Trading Scheme Based on the 2005 Emissions Data  

E-Print Network [OSTI]

This paper provides an initial analysis of the European Union Emissions Trading Scheme (EU ETS) based on the installation-level data for verified emissions and allowance allocations in the first trading year. Those data, ...

Ellerman, A. Denny.

238

Rep-Rated Target Injection for Inertial Fusion Energy  

SciTech Connect (OSTI)

Inertial Fusion Energy (IFE) with laser drivers is a pulsed power generation system that relies on repetitive, high-speed injection of targets into a fusion reactor. To produce an economically viable IFE power plant the targets must be injected into the reactor at a rate between 5 and 10 Hz.To survive the injection process, direct drive (laser fusion) targets (spherical capsules) are placed into protective sabots. The sabots separate from the target and are stripped off before entering the reactor chamber. Indirect drive (heavy ion fusion) utilizes a hohlraum surrounding the spherical capsule and enters the chamber as one piece.In our target injection demonstration system, the sabots or hohlraums are injected into a vacuum system with a light gas gun using helium as a propellant. To achieve pulsed operation a rep-rated injection system has been developed. For a viable power plant we must be able to fire continuously at 6 Hz. This demonstration system is currently set up to allow bursts of up to 12 targets at 6 Hz. Using the current system, tests have been successfully run with direct drive targets to show sabot separation under vacuum and at barrel exit velocities of {approx}400 m/s.The existing revolver system along with operational data will be presented.

Frey, D.T.; Goodin, D.T.; Stemke, R.W.; Petzoldt, R.W.; Drake, T.J.; Egli, W.; Vermillion, B.A.; Klasen, R.; Cleary, M.M

2005-05-15T23:59:59.000Z

239

The OLYMPUS Internal Hydrogen Target  

E-Print Network [OSTI]

An internal hydrogen target system was developed for the OLYMPUS experiment at DESY, in Hamburg, Germany. The target consisted of a long, thin-walled, tubular cell within an aluminum scattering chamber. Hydrogen entered at the center of the cell and exited through the ends, where it was removed from the beamline by a multistage pumping system. A cryogenic coldhead cooled the target cell to counteract heating from the beam and increase the density of hydrogen in the target. A fixed collimator protected the cell from synchrotron radiation and the beam halo. A series of wakefield suppressors reduced heating from beam wakefields. The target system was installed within the DORIS storage ring and was successfully operated during the course of the OLYMPUS experiment in 2012. Information on the design, fabrication, and performance of the target system is reported.

J. C. Bernauer; V. Carassiti; G. Ciullo; B. S. Henderson; E. Ihloff; J. Kelsey; P. Lenisa; R. Milner; A. Schmidt; M. Statera

2014-04-02T23:59:59.000Z

240

Photosensitizer Conjugates For Pathogen Targeting  

SciTech Connect (OSTI)

Conjugate molecules which include photosensitizer compositions conjugated to non-antibody non-affinity pair targeting moieties and methods of making and using such conjugates are described.

Hasan, Tayyaba (Arlington, MA); Hamblin, Michael R. (Revere, MA); Soukos, Nikos (Revere, MA)

2002-10-08T23:59:59.000Z

Note: This page contains sample records for the topic "achieving eu targets" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

POLARIZED TARGET EXPERIMENT AT FERMILAB  

E-Print Network [OSTI]

on Experiment 61 at Fermilab, which is a large collaborationBernie Sandler, From From Fermilab. Alan Jonckheere andTARGET EXPERIMENT AT FERMILAB Owen Chamberlain January 1977

Chamberlain, O.

2010-01-01T23:59:59.000Z

242

Target Space Duality III: Potentials  

E-Print Network [OSTI]

We generalize previous results on target space duality to the case where there are background fields and the sigma model lagrangian has a potential function.

Orlando Alvarez; Blazej Ruszczycki

2007-12-31T23:59:59.000Z

243

VERTEX CHAMBERS TARGET CELL CALORIMETER  

E-Print Network [OSTI]

DRIFT VC 1/2 FC 1/2 VERTEX CHAMBERS TARGET CELL DVC MC 1­3 HODOSCOPE H0 MONITOR BC 1/2 BC 3/4 TRD at Threashold Lambda Physics (u ­L spin transfer) Motivation: ­ W L Target cell e beam L p p e ­ Elastic: Peltier elements ( T ~ ­20C ) ­ Custom built electronics + HELIX chips low autgassing (

244

Abstract-Most fast developing countries have set targets to achieve a developed status in the near future.  

E-Print Network [OSTI]

is comparing developed countries with those of Latin America or Africa. The two latter do not yet satisfy the case of Chile. Index Terms--energy policy, low carbon economy, renewable energy, electricity regulation to increase the use of renewable energies to 20% of total production by 2020. Most fast developing countries

Catholic University of Chile (Universidad Católica de Chile)

245

achieve rapid modulation: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

POLICIES FOR ACHIEVING ENERGY JUSTICE IN SOCIETY: BEST PRACTICES FOR APPLYING SOLAR ENERGY) Project Center for Energy and Environmental Policy University of Delaware First...

246

achieving adequate sample: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

POLICIES FOR ACHIEVING ENERGY JUSTICE IN SOCIETY: BEST PRACTICES FOR APPLYING SOLAR ENERGY) Project Center for Energy and Environmental Policy University of Delaware First...

247

affect achievement mediated: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

POLICIES FOR ACHIEVING ENERGY JUSTICE IN SOCIETY: BEST PRACTICES FOR APPLYING SOLAR ENERGY) Project Center for Energy and Environmental Policy University of Delaware First...

248

achieving improved cycle: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

POLICIES FOR ACHIEVING ENERGY JUSTICE IN SOCIETY: BEST PRACTICES FOR APPLYING SOLAR ENERGY) Project Center for Energy and Environmental Policy University of Delaware First...

249

NERSC Announces 2nd Annual HPC Achievement Awards  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Computing Center (NERSC) announced the winners of its second annual High Performance Computing (HPC) Achievement Awards on Feb. 4, 2014, during the annual NERSC User Group...

250

Sherwin-Williams' Richmond, Kentucky, Facility Achieves 26% Energy...  

Broader source: Energy.gov (indexed) [DOE]

Sherwin-Williams' Richmond, Kentucky, Facility Achieves 26% Energy Intensity Reduction; Leads to Corporate Adoption of Save Energy Now LEADER Sherwin-Williams' Richmond, Kentucky,...

251

Accelerated math implementation and elementary student achievement and attitudes.  

E-Print Network [OSTI]

??The purpose of this evaluation is to show how Accelerated Math implementation affects student achievement and attitudes towards mathematics. Accelerated Math is a computer based… (more)

Meltcalf, Elizabeth B.

2009-01-01T23:59:59.000Z

252

Achieving High-Effiency Clean Ccombustion in Diesel Engines  

Broader source: Energy.gov (indexed) [DOE]

Achieving High-Efficiency Clean Combustion in Diesel Engines Robert M. Wagner, C. Scott Sluder, John M. Storey, Sam A. Lewis Oak Ridge National Laboratory Diesel Engine Emissions...

253

42484 secretarys achievement award - 5 x 6 - Building 51  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Idaho Nuclear Facility Decontamination & Decommissioning Project Daniel B. Poneman Acting Secretary of Energy Secretary's Achievement Award United States Department of Energy...

254

Microsoft PowerPoint - Chairs - Topics and Achievements (FINAL...  

Broader source: Energy.gov (indexed) [DOE]

September 17, 2014 www.energy.govEM 2 Hanford Advisory Board Achievements : * With the decommissioning of the Plutonium Finishing Plant's "McCluskey Room," the Hanford Nuclear...

255

achieve uniform sound: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

and Sound Renderer Computer Technologies and Information Sciences Websites Summary: sound waves propagation is achieved by the ECHO module using an original hierarchical radiant...

256

achieving engineering excellence: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

splitting Hydrogen Production Barthelat, Francois 10 School of Engineering and Applied Science Engineering Achievement Award Physics Websites Summary: 2010 School of Engineering...

257

achieve outstanding success: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Terry 6 The Sir William Stephenson Scholarship has been established to encourage students at The University of Winnipeg, who combine outstanding academic achievement and...

258

Pantex Plant Achieves Key Safety Milestone Ahead of Schedule...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Achieves Key Safety Milestone Ahead of Schedule | National Nuclear Security Administration Facebook Twitter Youtube Flickr RSS People Mission Managing the Stockpile Preventing...

259

achieve demand reduction: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Engineering Websites Summary: 1 Achieving Optimality and Fairness in Autonomous Demand Response: Benchmarks and Billing Member, IEEE, and Hamed Mohsenian-Rad, Member,...

260

Realizing Technologies for Magnetized Target Fusion  

SciTech Connect (OSTI)

Researchers are making progress with a range of magneto-inertial fusion (MIF) concepts. All of these approaches use the addition of a magnetic field to a target plasma, and then compress the plasma to fusion conditions. The beauty of MIF is that driver power requirements are reduced, compared to classical inertial fusion approaches, and simultaneously the compression timescales can be longer, and required implosion velocities are slower. The presence of a sufficiently large Bfield expands the accessibility to ignition, even at lower values of the density-radius product, and can confine fusion alphas. A key constraint is that the lifetime of the MIF target plasma has to be matched to the timescale of the driver technology (whether liners, heavy ions, or lasers). To achieve sufficient burn-up fraction, scaling suggests that larger yields are more effective. To handle the larger yields (GJ level), thick liquid wall chambers are certainly desired (no plasma/neutron damage materials problem) and probably required. With larger yields, slower repetition rates ({approx}0.1-1 Hz) for this intrinsically pulsed approach to fusion are possible, which means that chamber clearing between pulses can be accomplished on timescales that are compatible with simple clearing techniques (flowing liquid droplet curtains). However, demonstration of the required reliable delivery of hundreds of MJ of energy, for millions of pulses per year, is an ongoing pulsed power technical challenge.

Wurden, Glen A. [Los Alamos National Laboratory

2012-08-24T23:59:59.000Z

Note: This page contains sample records for the topic "achieving eu targets" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

NIF target fill, transport and insertion cryostat  

SciTech Connect (OSTI)

A cryostat to support the fielding of a cryogenic target within the NIF is described. The present design is predicated upon fuel layer symmetry being achieved with the {beta} layering process and modifications needed for other fuel symmetrization processes are discussed. These include the vertically differentially heated capsule with a uniform liquid layer stabilized by a surface tension gradient, foam supported liquid layers and solid D{sub 2} or HD layers symmetrized by bulk irradiation from a laser source. The cold sinks to be incorporated in these techniques could, in principal, be cooled with the high pressure helium envisioned for the heat sink rings of the present design. Supplementary laser access would be provided for differential heating of the capsule for surface tension gradient stabilization of a liquid layer or bulk heating of a solid layer. The cryostat in each of these cases would look substantially the same as in the present case with the only significant differences being in the details of the design in the immediate vicinity of the target.

Warren, R.

1994-09-20T23:59:59.000Z

262

Magnetized Target Fusion Collaboration. Final report  

SciTech Connect (OSTI)

Nuclear fusion has the potential to satisfy the prodigious power that the world will demand in the future, but it has yet to be harnessed as a practical energy source. The entry of fusion as a viable, competitive source of power has been stymied by the challenge of finding an economical way to provide for the confinement and heating of the plasma fuel. It is the contention here that a simpler path to fusion can be achieved by creating fusion conditions in a different regime at small scale (~ a few cm). One such program now under study, referred to as Magnetized Target Fusion (MTF), is directed at obtaining fusion in this high energy density regime by rapidly compressing a compact toroidal plasmoid commonly referred to as a Field Reversed Configuration (FRC). To make fusion practical at this smaller scale, an efficient method for compressing the FRC to fusion gain conditions is required. In one variant of MTF a conducting metal shell is imploded electrically. This radially compresses and heats the FRC plasmoid to fusion conditions. The closed magnetic field in the target plasmoid suppresses the thermal transport to the confining shell, thus lowering the imploding power needed to compress the target. The undertaking described in this report was to provide a suitable target FRC, as well as a simple and robust method for inserting and stopping the FRC within the imploding liner. The FRC must also survive during the time it takes for the metal liner to compress the FRC target. The initial work at the UW was focused on developing adequate preionization and flux trapping that were found to be essential in past experiments for obtaining the density, flux and most critically, FRC lifetime required for MTF. The timescale for testing and development of such a source can be rapidly accelerated by taking advantage of a new facility funded by the Department of Energy. At this facility, two inductive plasma accelerators (IPA) were constructed and tested. Recent experiments with these IPAs have demonstrated the ability to rapidly form, accelerate and merge two hypervelocity FRCs into a compression chamber. The resultant FRC that was formed was hot (T{sub ion} ~ 400 eV), stationary, and stable with a configuration lifetime several times that necessary for the MTF liner experiments. The accelerator length was less than 1 meter, and the time from the initiation of formation to the establishment of the final equilibrium was less than 10 microseconds. With some modification, each accelerator can be made capable of producing FRCs suitable for the production of the target plasma for the MTF liner experiment. Based on the initial FRC merging/compression results, the design and methodology for an experimental realization of the target plasma for the MTF liner experiment can now be defined. The construction and testing of the key components for the formation of the target plasma at the Air Force Research Laboratory (AFRL) will be performed on the IPA experiment, now at MSNW. A high density FRC plasmoid will be formed and accelerated out of each IPA into a merging/compression chamber similar to the imploding liner at AFRL. The properties of the resultant FRC plasma (size, temperature, density, flux, lifetime) will be obtained. The process will be optimized, and a final design for implementation at AFRL will be carried out. When implemented at AFRL it is anticipated that the colliding/merging FRCs will then be compressed by the liner. In this manner it is hoped that ultimately a plasma with ion temperatures reaching the 10 keV range and fusion gain near unity can be obtained.

John Slough

2012-04-18T23:59:59.000Z

263

Targeted drug delivery by novel polymer-drug conjugates containing linkers cleavable by disease-associated enzymes  

E-Print Network [OSTI]

We have conceptualized a new class of polymer-linker-drug conjugates to achieve targeted drug delivery for the systemic treatment of cancer and other inflammatory diseases. The physiochemical properties of the polymer allow ...

Chau, Ying

2005-01-01T23:59:59.000Z

264

Imaging the oxygen-rich disk toward the silicate carbon star EU And  

E-Print Network [OSTI]

We present multi-epoch high-angular resolution observations of 22 GHz H2O masers toward the silicate carbon star EU And to probe the spatio-kinematic distribution of oxygen-rich material. EU And was observed at three epochs (maximum time interval of 14 months) with the Very Long Baseline Array (VLBA). Our VLBA observations of the 22 GHz H2O masers have revealed that the maser spots are distributed along a straight line across ~20 mas, with a slight hint of an S-shaped structure. The observed spectra show three prominent velocity components at V_LSR = -42, -38, and -34 km s^-1, with the masers in SW redshifted and those in NE blueshifted. The maser spots located in the middle of the overall distribution correspond to the component at V_LSR = -38 km s^-1, which approximately coincides with the systemic velocity. These observations can be interpreted as either an emerging helical jet or a disk viewed almost edge-on (a circumbinary or circum-companion disk). However, the outward motion measured in the VLBA images taken 14 months apart is much smaller than that expected from the jet scenario. Furthermore, the mid-infrared spectrum obtained with the Spitzer Space Telescope indicates that the 10 micron silicate emission is optically thin and the silicate grains are of sub-micron size. This lends support to the presence of a circum-companion disk, because an optically thin circumbinary disk consisting of such small grains would be blown away by the intense radiation pressure of the primary (carbon-rich) star. If we assume Keplerian rotation for the circum-companion disk, the mass of the companion is estimated to be 0.5--0.8 M_sun. We also identify CO2 emission features at 13--16 micron in the Spitzer spectrum of EU And--the first unambiguous detection of CO2 in silicate carbon stars.

Keiichi Ohnaka; David A. Boboltz

2007-12-14T23:59:59.000Z

265

WASC Standard 2. Achieving Educational Objectives Through Core Functions  

E-Print Network [OSTI]

quality undergraduate education and for many of its interdisciplinary programs and pedagogical approachesWASC Standard 2. Achieving Educational Objectives Through Core Functions UC Santa Cruz achieves its institutional purposes and attains its educational objectives through the core functions of teaching

California at Santa Cruz, University of

266

achieving energy savings: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

achieving energy savings First Page Previous Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Next Page Last Page Topic Index 1 Energy Savings Achievable in...

267

The EU's Human Rights Obligations in Relation to Policies with Extraterritorial Effects  

E-Print Network [OSTI]

in their territory to cause harm to other states. This obligation is usually dated to the 1941 Trail Smelter arbitration, in which it was said that ‘no State has the right to use or permit the use of its territory in such a manner as to cause injury by fumes... and equipment [2008] OJ L335/99 requires EU Member States to ‘exercise special caution and vigilance in issuing licences … to countries where serious violations of human rights have been established …’. 49 Trail Smelter (US/Canada) (1941) 3 RIAA 1905...

Bartels, Lorand

2014-04-09T23:59:59.000Z

268

EU Energy Renewables Ltd now part of DeWind | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address:011-DNA Jump37. It is classified as ASHRAEDuvalJusticeEPS Corp JumpESV Group JumpGridEU

269

IPNS enriched uranium booster target  

SciTech Connect (OSTI)

Since startup in 1981, IPNS has operated on a fully depleted /sup 238/U target. With the booster as in the present system, high energy protons accelerated to 450 MeV by the Rapid Cycling Synchrotron are directed at the target and by mechanisms of spallation and fission of the uranium, produce fast neutrons. The neutrons from the target pass into adjacent moderator where they slow down to energies useful for spectroscopy. The target cooling systems and monitoring systems have operated very reliably and safely during this period. To provide higher neutron intensity, we have developed plans for an enriched uranium (booster) target. HETC-VIM calculations indicate that the target will produce approx.90 kW of heat, with a nominal x5 gain (k/sub eff/ = 0.80). The neutron beam intensity gain will be a factor of approx.3. Thermal-hydraulic and heat transport calculations indicate that approx.1/2 in. thick /sup 235/U discs are subject to about the same temperatures as the present /sup 238/U 1 in. thick discs. The coolant will be light demineralized water (H/sub 2/O) and the coolant flow rate must be doubled. The broadening of the fast neutron pulse width should not seriously affect the neutron scattering experiments. Delayed neutrons will appear at a level about 3% of the total (currently approx.0.5%). This may affect backgrounds in some experiments, so that we are assessing measures to control and correct for this (e.g., beam tube choppers). Safety analyses and neutronic calculations are nearing completion. Construction of the /sup 235/U discs at the ORNL Y-12 facility is scheduled to begin late 1985. The completion of the booster target and operation are scheduled for late 1986. No enriched uranium target assembly operating at the projected power level now exists in the world. This effort thus represents an important technological experiment as well as being a ''flux enhancer''.

Schulke, A.W. Jr.

1985-01-01T23:59:59.000Z

270

Ecological improvement and sustainable development in European skiing resorts by adapting the EU-Eco-Audit  

E-Print Network [OSTI]

The range of environmental problems in European skiing resorts caused by winter sports, agriculture and summer tourism are all well known. The issues and management challenges relate to sensitive ecological conditions, construction activities, deficiencies in visitor management and an land use conflicts during summer. One new approach to manage these problems is the EU-Eco-Audit. In test sites in Switzerland, Liechtenstein and Austria a successful adaptation of the EU-Eco-Audit framework to ski resorts has been developed. The implementation of the Audit framework at these test sites led to positive effects concerning visitor and ecological management. One influencing factor for the future development is the positive public image concerning environmental aspects. Crucial to the implementation of the Eco-Audit-framework is whether it will assist ski resorts in their competition with other destiantions for hosting international events. Finally the acceptance of the certificates or awards by skiers is discussed. It will be argued that due to the increasing relevance of information provision and marketing of wintersport destinations via the internet, the auditing or award concept contributes to a positive image of these enterprises and destinations in the market place. 2

Ulrike Pröbstl

271

{sup 152}Eu depths profiles granite and concrete cores exposed to the Hiroshima atomic bomb  

SciTech Connect (OSTI)

Two granite and two concrete core samples were obtained within 500 m from the hypocenter of the Hiroshima atomic bomb, and the depth profile of {sup 152}Eu was measured to evaluate the incident neutron spectrum. The granite cores were obtained from a pillar of the Motoyasu Bridge located 101 m from the hypocenter and from a granite rock in the Shirakami Shrine (379 m); the concrete cores were obtained from a gate in the Gokoku Shrine (398 m) and from top of the Hiroshima bank (250 m). The profiles of the specific activities of the cores were measured to a depth of 40 cm from the surface using low background germanium (Ge) spectrometers. According to the measured depth profiles, relaxation lengths of incident neutrons were derived as 13.6 cm for Motoyasu Bridge pillar (granite), 12.2 cm for Shirakami Shrine core (granite), and 9.6 cm for concrete cores of Gokoku Shrine and Hiroshima Bank. In addition, a comparison of the granite cores in Hiroshima showed good agreement with Nagasaki data. Present results indicates that the depth profile of {sup 152}Eu reflects incident neutrons not so high but in the epithermal region. 19 refs., 7 figs., 8 tabs.

Shizuma, Kiyoshi; Iwatani, Kazuo [Hiroshima Univ. (Japan); Oka, Takamitsu [Kure Univ. (Japan)] [and others

1997-06-01T23:59:59.000Z

272

Targets and methods for target preparation for radionuclide production  

DOE Patents [OSTI]

The invention relates to nuclear technology, and to irradiation targets and their preparation. One embodiment of the present invention includes a method for preparation of a target containing intermetallic composition of antimony Ti--Sb, Al--Sb, Cu--Sb, or Ni--Sb in order to produce radionuclides (e.g., tin-117 m) with a beam of accelerated particles. The intermetallic compounds of antimony can be welded by means of diffusion welding to a copper backing cooled during irradiation on the beam of accelerated particles. Another target can be encapsulated into a shell made of metallic niobium, stainless steel, nickel or titanium cooled outside by water during irradiation. Titanium shell can be plated outside by nickel to avoid interaction with the cooling water.

Zhuikov, Boris L; Konyakhin, Nicolai A; Kokhanyuk, Vladimir M; Srivastava, Suresh C

2012-10-16T23:59:59.000Z

273

Greensburg Implements High-Efficiency Building Codes to Achieve...  

Office of Environmental Management (EM)

Building Codes to Achieve Long-Term Energy Savings The LEED Platinum K-12 school in Greensburg, Kansas. Photo from Joah Bussert, Greensburg GreenTown, NREL 19952<...

274

Achieving Superior Plant Energy Performance Utilizing Real-time Data  

E-Print Network [OSTI]

. With the right Best Practices, however, using new methodologies and technologies unavailable only a few years ago, enterprises can achieve dramatic energy reductions and their resulting cost savings. These Best Practices are founded on 1) application of a...

Subramanya, S.

2010-01-01T23:59:59.000Z

275

Jefferson Lab News - Jefferson Lab Achieves Critical Milestone...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Achieves Critical Milestone Toward Construction of 310-Million Upgrade Project Pion This architectural rendering shows the Hall D complex to be built as part of the CEBAF 12 GeV...

276

The effect of teacher certification on student achievement  

E-Print Network [OSTI]

The purpose of this study was to review the empirical research evidence on the effect of teacher certification on student achievement. An exploratory meta-analysis was conducted on studies that examined the effect of fully certified and less...

Sparks, Karin

2005-08-29T23:59:59.000Z

277

Microsoft Word - Barriers to Achieving the Modern Grid_Final...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

our 21 st Century Economy V1.0 Barriers to Achieving the Modern Grid A declining infusion of new thought is occurring. The technical experience base of utilities is graying....

278

Achieving sub-10-nm resolution using scanning electron beam lithography  

E-Print Network [OSTI]

Achieving the highest possible resolution using scanning-electron-beam lithography (SEBL) has become an increasingly urgent problem in recent years, as advances in various nanotechnology applications have driven demand for ...

Cord, Bryan M. (Bryan Michael), 1980-

2009-01-01T23:59:59.000Z

279

Paper achieves forest certification An Independent Paper plc product story  

E-Print Network [OSTI]

Paper achieves forest certification An Independent Paper plc product story Edited certification: News from Independent Paper plc http://www.printingtalk.com/news/inp/inp119.html 1 of 1 11

280

Forest County Potawatomi Recognized for Renewable Energy Achievements...  

Energy Savers [EERE]

Energy Achievements May 28, 2014 - 5:53pm Addthis A 2-megawatt anaerobic digester and biogas generation facility converts food waste into electricity to power 1,500 homes. Photo...

Note: This page contains sample records for the topic "achieving eu targets" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

achieving sustainable health: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

industry is as dependent on business-as-usual as any other. In the United States, health care is a forLETTER Reply to Knecht: Achieving sustainable health We wholeheartedly...

282

Enterprise Assessments Targeted Review, Argonne National Laboratory...  

Energy Savers [EERE]

Targeted Review, Argonne National Laboratory - November 2014 Enterprise Assessments Targeted Review, Argonne National Laboratory - November 2014 November 2014 Review of the...

283

A Prospective Target for Advanced Biofuel Production  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

A Prospective Target for Advanced Biofuel Production A Prospective Target for Advanced Biofuel Production Print Thursday, 02 February 2012 13:34 The sesquiterpene bisabolene was...

284

Japan hopes for rapid accord with EU on nuclear reactor Japanese Prime Minister Junichiro Koizumi said Monday that he hopes to resolve a dispute with the  

E-Print Network [OSTI]

Japan hopes for rapid accord with EU on nuclear reactor 02/05/2005 Japanese Prime Minister nuclear reactor as soon as possible. Koizumi discussed the row over plans for the International Terms and Conditions 5/2/05 8:59 AMEUbusiness - Japan hopes for rapid accord with EU on nuclear reactor

285

Les dterminants du prix du carbone sur le march europen des quotas Carbon price drivers in the EU Emissions Trading Scheme  

E-Print Network [OSTI]

in the EU Emissions Trading Scheme Emilie Alberola1 et Julien Chevallier2 Résumé: L'article examine le prix des quotas durant la première période (2005-2007) de l'European Union Emissions Trading Scheme (EU

Paris-Sud XI, Université de

286

X-Ray Storage Luminescence of BaFCl:Eu2+ Single Crystals Nomadics, Inc., 1024 South InnoVation Way, Stillwater, Oklahoma 74074  

E-Print Network [OSTI]

X-Ray Storage Luminescence of BaFCl:Eu2+ Single Crystals Wei Chen* Nomadics, Inc., 1024 South InnoVed: January 18, 2005; In Final Form: March 22, 2005 Temperature behaviors of X-ray luminescence (XL might not be oxidized to Eu3+ upon X-ray or -irradiation. Instead, the color centers, Cl excitons

Chen, Reuven

287

Progress with developing a target for magnetized target fusion  

SciTech Connect (OSTI)

Magnetized Target Fusion (MTF) is an approach to fusion where a preheated and magnetized plasma is adiabatically compressed to fusion conditions. Successful MTF requires a suitable initial target plasma with an embedded magnetic field of at least 5 T in a closed-field-line topology, a density of roughly 10{sup 18} cm{sup {minus}3}, a temperature of at least 50 eV, and must be free of impurities which would raise radiation losses. Target plasma generation experiments are underway at Los Alamos National Laboratory using the Colt facility; a 0.25 MJ, 2--3 {micro}s rise-time capacitor bank. The goal of these experiments is to demonstrate plasma conditions meeting the minimum requirements for a MTF initial target plasma. In the first experiments, a Z-pinch is produced in a 2 cm radius by 2 cm high conducting wall using a static gas-fill of hydrogen or deuterium gas in the range of 0.5 to 2 torr. Thus far, the diagnostics include an array of 12 B-dot probes, framing camera, gated OMA visible spectrometer, time-resolved monochrometer, filtered silicon photodiodes, neutron yield, and plasma-density interferometer. These diagnostics show that a plasma is produced in the containment region that lasts roughly 10 to 20 {micro}s with a maximum plasma density exceeding 10{sup 18} cm{sup {minus}3}. The experimental design and data are presented.

Wysocki, F.J.; Chrien, R.E.; Idzorek, G.; Oona, H.; Whiteson, D.O.; Kirkpatrick, R.C.; Lindemuth, I.R.; Sheehey, P.T.

1997-09-01T23:59:59.000Z

288

Target  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security AdministrationcontrollerNanocrystallineForeign ObjectOUR8, 2013 FINAL MEETING SUMMARY7,TankLifetime

289

Targets  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas ConchasPassiveSubmittedStatus TomAboutManus Site-Inactive TWPCarbonTakeRVTape Mounts

290

Non-PGM Target Update  

Broader source: Energy.gov (indexed) [DOE]

at 0.80 V set for a measured activity target of 11 Acm 3 at 0.90 V, iR-corrected. (Equivalent to 300 Acm 3 at 0.80 V assuming 70 mVdec Tafel slope.) Consistent criteria...

291

P\\procedure\\EU#7 Page 1 of 2 TITLE: PROCEDURE FOR RECORDING AND TRANSMITTING METER READINGS  

E-Print Network [OSTI]

P\\procedure\\EU#7 Page 1 of 2 TITLE: PROCEDURE FOR RECORDING AND TRANSMITTING METER READINGS FOR NEW METER SETS, METER REPLACEMENTS AND WHEN THE ACCOUNTABILITY FOR THE METERS USAGE CHANGES OBJECTIVE AND PURPOSE: To provide a timely and accurate method of capturing meter readings when a meter is changed out

Fernandez, Eduardo

292

Preparation of polypyrrole-incorporated mesoporous carbon-based composites for confinement of Eu(III) within mesopores  

E-Print Network [OSTI]

e Mesoporous polymer-carbon composite (CMPEI/CMK-3) materials were successfully preparedPreparation of polypyrrole-incorporated mesoporous carbon-based composites for confinement of Eu processes. 1. Introduction A number of organic-inorganic or organic-organic composite materials have been

Boo, Jin-Hyo

293

Fair Weather Friends or Pillars of Support: Assessing the Sources of Legitimacy of EU Governance Among the Public Across Europe  

E-Print Network [OSTI]

of national institutions and priorities shaping the European Union’s response to the current fiscal and economic crisis flowing from the global “Great Recession”, is a growing concern for policy makers and scholars alike regarding the legitimacy of the EU...

Bastin, Mariah Margareta

2013-02-04T23:59:59.000Z

294

From October 10, 2007 Report of E.U. Environmental Agency on Europe's environment: Recycling and WTE are complementary  

E-Print Network [OSTI]

From October 10, 2007 Report of E.U. Environmental Agency on Europe's environment: Recycling detrimental effects on public health and the environment. When comparing waste disposal options recycling and incineration with energy recovery. In contrast, countries with a medium level of landfill (25

Columbia University

295

REFUEL: an EU road map for biofuels , E. Deurwaarder and S. Lensink, ECN policy Studies, the Netherlands  

E-Print Network [OSTI]

REFUEL: an EU road map for biofuels M. Londo1 , E. Deurwaarder and S. Lensink, ECN policy Studies), Poland K. Könighofer, Joanneum Research, Austria Abstract A successful mid-term development of biofuels calls for a robust road map. REFUEL assesses inter alia least-cost biofuel chain options, their benefits

296

A Top-down and Bottom-up look at Emissions Abatement in Germany in response to the EU ETS  

E-Print Network [OSTI]

This paper uses top-down trend analysis and a bottom-up power sector model to define upper and lower boundaries on abatement in Germany in the first phase of the EU Emissions Trading Scheme (2005-2007). Long-term trend ...

Feilhauer, Stephan M. (Stephan Marvin)

2008-01-01T23:59:59.000Z

297

Role of Bioenergy in the Kyoto Protocol, in the EU-ETS and in future Climate Agreements  

E-Print Network [OSTI]

in existing plants (co-firing) is already competitive with other fuels at a CO2 price of about 20 Euros Union implemented the European Emission Trading Scheme (EU-ETS) Some 12,000 large industrial plants, such as switching to a low emission fuel mix and investments in new climate friendly technologies are encouraged

298

Abstract--This paper describes Nice Grid, a demonstration project part of the European initiative Grid4EU. The project  

E-Print Network [OSTI]

Grid4EU. The project aims at developing a smart solar neighbourhood in the urban area of the city with forecasts of solar power production and load in a local energy management system. The paper, which demonstration projects on Smart Grid. Index Terms-- Energy storage, Forecasting, Photovoltaic systems, Smart

Paris-Sud XI, Université de

299

Comparative analysis of the life cycle impact assessment of available cement inventories in the EU  

SciTech Connect (OSTI)

Life cycle impact assessment (LCIA) is one of basic steps in life cycle assessment methodology (LCA). This paper presents a comparative study of the LCIA of different life cycle inventories (LCI) for EU cements. The analysis unit used is the manufacture of 1 kg of cement, from 'cradle to gate'. The impact categories considered are those resulting from the manufacture of cement and include greenhouse effects, acidification, eutrophication and summer and winter smog, amongst others. The results of the study highlighted some inconsistencies in existing inventories. As for the LCIA, the main environmental interventions related to cement manufacture were classified and characterised and their effect on different impact categories analysed. Differences observed in evaluation of the impact of cement type were essentially related to their clinker content.

Josa, Alejandro [Technical University of Catalonia (UPC), School of Civil Engineering (ETSECCPB), C/Jordi Girona 1-3 Modul D2/C1, Barcelona 08034 (Spain)]. E-mail: alejandro.josa@upc.edu; Aguado, Antonio [Technical University of Catalonia (UPC), School of Civil Engineering (ETSECCPB), C/Jordi Girona 1-3 Modul D2/C1, Barcelona 08034 (Spain); Cardim, Arnaldo [Civil Engineering Department, Polytechnic School of Penambuco University, Rua Benfica, 455-Madalena, CEP 50.750-410 (Brazil); Byars, Ewan [Centre for Cement and Concrete, Department of Civil and Structural Engineering, University of Sheffield, Sir Frederick Mappin Building, Mappin Street, Sheffield S1 3JD (United Kingdom)

2007-05-15T23:59:59.000Z

300

The HERMES Polarized Hydrogen Internal Gas Target  

E-Print Network [OSTI]

internal gas targets. The HERMES hydrogen target is an internal polarized gas target using the storage cell frame on the right. atomic hydrogen beam and focuses it into a storage cell. The storage cellThe HERMES Polarized Hydrogen Internal Gas Target J. Stewart for The HERMES Collaboration

Note: This page contains sample records for the topic "achieving eu targets" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Photoemission Study of the Rare Earth Intermetallic Compounds: RNi2Ge2 (R=Eu, Gd)  

SciTech Connect (OSTI)

EuNi{sub 2}Ge{sub 2} and GdNi{sub 2}Ge{sub 2} are two members of the RT{sub 2}X{sub 2} (R = rare earth, T = transition metal and X = Si, Ge) family of intermetallic compounds, which has been studied since the early 1980s. These ternary rare-earth intermetallic compounds with the tetragonal ThCr{sub 2}Si{sub 2} structure are known for their wide variety of magnetic properties, Extensive studies of the RT{sub 2}X{sub 2} series can be found in Refs [ 1,2,3]. The magnetic properties of the rare-earth nickel germanides RNi{sub 2}Ge{sub 2} were recently studied in more detail [4]. The purpose of this dissertation is to investigate the electronic structure (both valence band and shallow core levels) of single crystals of EuNi{sub 2}Ge{sub 2} and GdNi{sub 2}Ge{sub 2} and to check the assumptions that the f electrons are non-interacting and, consequently, the rigid-band model for these crystals would work [11], using synchrotron radiation because, to the best of our knowledge, no photoemission measurements on those have been reported. Photoemission spectroscopy has been widely used to study the detailed electronic structure of metals and alloys, and especially angle-resolved photoemission spectroscopy (ARPES) has proven to be a powerful technique for investigating Fermi surfaces (FSs) of single-crystal compounds.

Jongik Park

2004-12-19T23:59:59.000Z

302

Achieving Energy Performance in spite of complex systems and dis-jointed design  

E-Print Network [OSTI]

Achieving Energy Performance in spite of complex systems and dis-jointed design Caoimhin Ardren1 and Dr Paul Bannister2 1 BSc(QS), AAIQS, ICEC, GSAP (Sydney, Australia). 2 BSc (1st Hons, Maths & Physics), PhD (Eng. Physics). M.IPENZB. (Canberra... Jan?12 Feb?12 Mar?12 Apr?12 May?12 Jun?12 To ta l?E m iss io ns ?? Sc op e? 1, 2? &? 3? (k gC O2 ) Base?Building?Actual?Emissions Base?Building?Target?Emissions 5 4.5 4 0 10,000 20,000 30,000 40,000 50,000 60,000 70,000 Oct...

Ardren, C.; Bannister, P.

2012-01-01T23:59:59.000Z

303

What is Security? A perspective on achieving security  

SciTech Connect (OSTI)

This presentation provides a perspective on achieving security in an organization. It touches upon security as a mindset, ability to adhere to rules, cultivating awareness of the reason for a security mindset, the quality of a security program, willingness to admit fault or acknowledge failure, peer review in security, science as a model that can be applied to the security profession, the security vision, security partnering, staleness in the security program, security responsibilities, and achievement of success over time despite the impossibility of perfection.

Atencio, Julian J.

2014-05-05T23:59:59.000Z

304

Alternative Formats to Achieve More Efficient Energy Codes for Commercial Buildings  

SciTech Connect (OSTI)

This paper identifies and examines several formats or structures that could be used to create the next generation of more efficient energy codes and standards for commercial buildings. Pacific Northwest National Laboratory (PNNL) is funded by the U.S. Department of Energy’s Building Energy Codes Program (BECP) to provide technical support to the development of ANSI/ASHRAE/IES Standard 90.1. While the majority of PNNL’s ASHRAE Standard 90.1 support focuses on developing and evaluating new requirements, a portion of its work involves consideration of the format of energy standards. In its current working plan, the ASHRAE 90.1 committee has approved an energy goal of 50% improvement in Standard 90.1-2013 relative to Standard 90.1-2004, and will likely be considering higher improvement targets for future versions of the standard. To cost-effectively achieve the 50% goal in manner that can gain stakeholder consensus, formats other than prescriptive must be considered. Alternative formats that include reducing the reliance on prescriptive requirements may make it easier to achieve these aggressive efficiency levels in new codes and standards. The focus on energy code and standard formats is meant to explore approaches to presenting the criteria that will foster compliance, enhance verification, and stimulate innovation while saving energy in buildings. New formats may also make it easier for building designers and owners to design and build the levels of efficiency called for in the new codes and standards. This paper examines a number of potential formats and structures, including prescriptive, performance-based (with sub-formats of performance equivalency and performance targets), capacity constraint-based, and outcome-based. The paper also discusses the pros and cons of each format from the viewpoint of code users and of code enforcers.

Conover, David R.; Rosenberg, Michael I.; Halverson, Mark A.; Taylor, Zachary T.; Makela, Eric J.

2013-01-26T23:59:59.000Z

305

Achieving Energy Savings Through Residential Energy Use Behavior  

E-Print Network [OSTI]

Achieving Energy Savings Through Residential Energy Use Behavior Studies Energy Efficiency Research Office PIER Buildings End-use Energy Efficiency Research Program www.energy.ca.gov/research/buildings May 2012 The Issue Understanding the factors that influence energy use behavior is a largely uninvestigated

306

Energy Savings Achievable in Connection Preserving Energy Saving Algorithms  

E-Print Network [OSTI]

power, energy savings I. INTRODUCTION Wireless sensor networks have been widely used for mon- itoringEnergy Savings Achievable in Connection Preserving Energy Saving Algorithms Seh Chun Ng School ICT Australia Limited Canberra, Australia Email: brian.anderson@nicta.com.au Abstract--Energy saving

Mao, Guoqiang

307

On Achieving Balanced Power Consumption in Software Pipelined Loops #  

E-Print Network [OSTI]

. The benchmarks are executed on the Wattch power simulator. In comparison to the original (powerOn Achieving Balanced Power Consumption in Software Pipelined Loops # Hongbo Yang Dept of ECE Univ@capsl.udel.edu ABSTRACT While a significant body of work in compilers has been de­ voted to reducing energy consumption

Gao, Guang R.

308

ELEMENT C: Management Measures Necessary to Achieve Your Load Reductions,  

E-Print Network [OSTI]

, public education, ordinances, pet waste programs, erosion control plans. Regulatory Tools as Management · Identify new management opportunities · Identify critical areas in watershed where additional measures1 ELEMENT C: Management Measures Necessary to Achieve Your Load Reductions, Along with the Critical

309

Biofuels' Time of Transition Achieving high performance in a world  

E-Print Network [OSTI]

Biofuels' Time of Transition Achieving high performance in a world of increasing fuel diversity #12;2 Table of contents #12;3 Introduction Up close: Highlights of Accenture's first biofuels study An evolving biofuels industry 1 Consumer influence Guest commentary on land-use change In focus: The food

Kammen, Daniel M.

310

MAJOR, LIFETIME ACHIEVEMENT AWARD FOR POET, PROF. PAUL MARIANI  

E-Print Network [OSTI]

MAJOR, LIFETIME ACHIEVEMENT AWARD FOR POET, PROF. PAUL MARIANI CHESTNUT HILL, MA (February 2009) -- University Prof. of English Paul Mariani, a noted Catholic poet and essayist who is one of America's foremost regarded biographies of twentieth-century American poets": William Carlos Williams: A New World Naked (1981

Huang, Jianyu

311

Achievement Rewards for College Scientists ARCS Foundation, Inc.  

E-Print Network [OSTI]

Achievement Rewards for College Scientists ARCS Foundation, Inc. For more information on how of the ARCS Foundation, Inc. funds seven scholarships for exceptional University of Georgia doctoral students. Available to attend the ARCS Foundation Awards Luncheon in Atlanta on November 21, 2013. ARCS Foundation

Arnold, Jonathan

312

Achievement Rewards for College Scientists ARCS Foundation, Inc.  

E-Print Network [OSTI]

Achievement Rewards for College Scientists ARCS Foundation, Inc. Biomedical and Health Sciences the Atlanta chapter of the ARCS Foundation, Inc. funds eight scholarships for exceptional University.S. citizenship. · GPA of 3.5 or above. · Available to attend the ARCS Foundation Awards Luncheon in Atlanta

Arnold, Jonathan

313

The CSU Graduation Initiative Closing the Achievement Gap  

E-Print Network [OSTI]

Graduation Initiative is part of the nationwide Access to Success project of the National Association to Graduation 7 #12;Tracking and Reporting Consistent evaluation of project results is a critical componentThe CSU Graduation Initiative Closing the Achievement Gap Executive Vice Chancellor Jeri Echeverria

Su, Xiao

314

Database Research: Achievements and Opportunities Into the 21st Century  

E-Print Network [OSTI]

Database Research: Achievements and Opportunities Into the 21st Century Avi Silberschatz, Mike Stonebraker, Jeff Ullman, editors Report of an NSF Workshop on the Future of Database Systems Research, May 26--27, 1995 1 1 Introduction In February of 1990, a group of database researchers met to examine the prospects

Ullman, Jeffrey D.

315

New Geosciences Scholarship Fund for High-Achieving Students  

E-Print Network [OSTI]

to R35,000 for students intending to major in Geology* - For , we will cover university fees for the top 2 students intending to major in Geology, who achieve distinctions in all Major- level subjects *A undergraduates receive industry bursaries (mining, oil & gas, consultancies, etc). Normally carries an obligation

Wagner, Stephan

316

Achievable Error Exponents for the Private Fingerprinting Game  

E-Print Network [OSTI]

Achievable Error Exponents for the Private Fingerprinting Game Anelia Somekh-Baruch and Neri Merhav a forgery of the data while aiming at erasing the fingerprints in order not to be detected. Their action have presented and analyzed a game-theoretic model of private2 fingerprinting systems in the presence

Merhav, Neri

317

Opportunities for Achieving Significant Energy Reduction in Existing University Buildings  

E-Print Network [OSTI]

Opportunities for Achieving Significant Energy Reduction in Existing University Buildings of Findings from GE 520/MN 500: "Energy Audit/Conservation Analysis of BU's Charles River Campus" 2010 #12 Footprint: Boston University Charles River Campus. Presentation to the BU Energy Club. Results of 2007

Hutyra, Lucy R.

318

Achieving Energy Conservation in Poisson-Boltzmann Molecular Dynamics  

E-Print Network [OSTI]

1 Achieving Energy Conservation in Poisson-Boltzmann Molecular Dynamics: Accuracy and Precision University, Raleigh, NC 27695 Abstract Violation of energy conservation in Poisson-Boltzmann molecular is the observed violation of energy conservation in Poisson-Boltzmann molecular dynamics, in part due to its

Zhao, Hongkai

319

Achievements and Outlook 2012 SA Water Centre for Water  

E-Print Network [OSTI]

Achievements and Outlook 2012 SA Water Centre for Water Management and Reuse #12;Contents Our Breaking News 35 SA Water Centre for Water Management and Reuse University of South Australia Mawson Lakes Campus Mawson Lakes SA 5095 Telephone: +61 (08) 8302 3338 Fax: +61 (08) 8302 3386 Web: unisa.edu.au/water

Mayer, Wolfgang

320

WILD POLYOMINO WEAK (1,2)-ACHIEVEMENT GAMES  

E-Print Network [OSTI]

WILD POLYOMINO WEAK (1,2)-ACHIEVEMENT GAMES N´andor Sieben Department of Mathematics, Northern cells at each move. A wild polyomino is a finite set of cells that are connected through an edge or through a corner. All wild polyominos on an infinite 2-dimensional rectangular board are characterized

Sieben, Nándor

Note: This page contains sample records for the topic "achieving eu targets" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

private investment cooperation. The book's uniqueness lies in achieving mean-  

E-Print Network [OSTI]

and environmental planning pro- gram at the University of Michigan, Ann Arbor. She has a background in architecture and a Master's degree in Heritage Manage- ment from the University of Birmingham, U.K. Sustainable that sustainable transport networks can be achieved. The book presents a rigorous yet practicable framework

Handy, Susan L.

322

Achieving Differential Privacy of Data Disclosure in the Smart Grid  

E-Print Network [OSTI]

Achieving Differential Privacy of Data Disclosure in the Smart Grid Jing Zhao Taeho Jung Yu Wang-- The smart grid introduces new privacy implications to individuals and their family due to the fine of the proposed method over existing BLH methods. Index Terms--Smart Grid, Smart Meter, Privacy, Differential

Li, Xiang-Yang

323

achieving energy efficiency: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

achieving energy efficiency First Page Previous Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Next Page Last Page Topic Index 1 Real Time Monitoring:...

324

achieving energy conservation: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

achieving energy conservation First Page Previous Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Next Page Last Page Topic Index 1 Energy Challenges and...

325

Work Structuring to Achieve Integrated ProductProcess Design  

E-Print Network [OSTI]

Work Structuring to Achieve Integrated Product­Process Design Cynthia C. Y. Tsao, A.M.ASCE1 ; Iris presents "work structuring," a term used to describe the effort of integrating product and process design. As the project progresses, work structuring becomes more focused to guide the design and execution of interacting

Tommelein, Iris D.

326

Boise Inc. St. Helens Paper Mill Achieves Significant Fuel Savings  

SciTech Connect (OSTI)

This case study describes how the Boise Inc. paper mill in St. Helens, Oregon, achieved annual savings of approximately 154,000 MMBtu and more than $1 million after receiving a DOE Save Energy Now energy assessment and implementing recommendations to improve the efficiency of its steam system.

Not Available

2008-05-01T23:59:59.000Z

327

Nine objectives are being implemented to achieve the wetlands  

E-Print Network [OSTI]

CHAPTER 3 OBJECTIVES Nine objectives are being implemented to achieve the wetlands goal. The action the Interagency Wetlands Committee recognized the validity of these objectives and the need for their continued the state's wetlands resource base more completely and identify the critical functions of the major types

Gray, Matthew

328

Three-dimensional computational fluid dynamics for the Spallation Neutron Source liquid mercury target  

SciTech Connect (OSTI)

The Spallation Neutron Source (SNS) is a high-power accelerator-based pulsed spallation source being designed by a multilaboratory team led by Oak Ridge National Laboratory (ORNL) to achieve high fluxes of neutrons for scientific experiments. Computational fluid dynamics (CFD) is being used to analyze the SNS design. The liquid-mercury target is subjected to the neutronic (internal) heat generation that results from the proton collisions with the mercury nuclei. The liquid mercury simultaneously serves as the neutronic target medium, transports away the heat generated within itself, and cools the metallic target structure. Recirculation and stagnation zones within the target are of particular concern because of the likelihood that they will result in local hot spots. These zones exist because the most feasible target designs include a complete U-turn flow redirection. Although the primary concern is that the target is adequately cooled, the pressure drop from inlet to outlet must also be considered because pressure drop directly affects structural loading and required pumping power. Based on the current design, a three-dimensional CFD model has been developed that includes the stainless steel target structure, the liquid-mercury target flow, and the liquid-mercury cooling jacket that wraps around the nose of the target.

Wendel, M.W.; Siman-Tov, M.

1998-11-01T23:59:59.000Z

329

LIFE Target Fabrication Research Plan Sept 2008  

SciTech Connect (OSTI)

The target-system for the baseline LIFE fast-ignition target was analyzed to establish a preliminary estimate for the costs and complexities involved in demonstrating the technologies needed to build a prototype LIFE plant. The baseline fast-ignition target upon which this analysis was developed is shown in Figure 1.0-1 below. The LIFE target-system incorporates requirements for low-cost, high throughput manufacture, high-speed, high accuracy injection of the target into the chamber, production of sufficient energy from implosion and recovery and recycle of the imploded target material residue. None of these functions has been demonstrated to date. Existing target fabrication techniques which lead to current 'hot spot' target costs of {approx}$100,000 per target and at a production rate of 2/day are unacceptable for the LIFE program. Fabrication techniques normally used for low-cost, low accuracy consumer products such as toys must be adapted to the high-accuracy LIFE target. This will be challenge. A research program resulting is the demonstration of the target-cycle technologies needed for a prototype LIFE reactor is expected to cost {approx}$51M over the course of 5 years. The effort will result in targets which will cost an estimated $0.23/target at a rep-rate of 20 Hz or about 1.73M targets/day.

Miles, R; Biener, J; Kucheyev, S; Montesanti, R; Satcher, J; Spadaccini, C; Rose, K; Wang, M; Hamza, A; Alexander, N; Brown, L; Hund, J; Petzoldt, R; Sweet, W; Goodin, D

2008-11-10T23:59:59.000Z

330

Consumption-Based Adjustment of China's Emissions-Intensity Targets: An  

E-Print Network [OSTI]

China's Twelfth Five-Year Plan (2011­2015) aims to achieve a national carbon intensity reduction of 17Consumption-Based Adjustment of China's Emissions-Intensity Targets: An Analysis of its Potential & Climate Project TSINGHUA - MIT #12;The MIT Joint Program on the Science and Policy of Global Change

331

Achieve Continuous Injection of Solid Fuels into Advanced Combustion System Pressures  

SciTech Connect (OSTI)

The overall objective of this project is the development of a mechanical rotary-disk feeder, known as the Stamet Posimetric High Pressure Solids Feeder System, to feed dry granular coal continuously and controllably into pressurized environments of up to 35 kg/cm{sup 2} (500 psi). This was to be accomplished in two phases. The first task was to review materials handling experience in pressurized operations as it related to the target pressures for this project, and review existing coal preparation processes and specifications currently used in advanced combustion systems. Samples of existing fuel materials were obtained and tested to evaluate flow, sealing and friction properties. This provided input data for use in the design of the Stamet Feeders for the project, and ensured that the material specification used met the requirements of advanced combustion & gasification systems. Ultimately, Powder River Basin coal provided by the PSDF facility in Wilsonville, AL was used as the basis for the feeder design and test program. Based on the material property information, a Phase 1 feeder system was designed and built to accomplish feeding the coal to an intermediate pressure up to 21 kg/cm{sup 2} (300 psi) at feed rates of approximately 100 kilograms (220lbs) per hour. The pump & motor system was installed in a custom built test rig comprising an inlet vessel containing an active live-wall hopper mounted in a support frame, transition into the pump inlet, transition from pump outlet and a receiver vessel containing a receiver drum supported on weigh cells. All pressure containment on the rig was rated for the final pressure requirement of 35 kg/cm{sup 2} (500psi). A program of testing and modification was carried out in Stamet's facility in CA, culminating in successful feeding of coal into the Phase 1 target of 21 kg/cm{sup 2} (300psi) gas pressure in December 2003. Further testing was carried out at CQ Inc's facility in PA, providing longer run times and experience of handling and feeding the coal in winter conditions. Based on the data developed through the testing of the Phase I unit, a Phase II system was designed for feeding coal into pressures of up to 35 kg/cm{sup 2} (500 psi). A further program of testing and modification was then carried out in Stamet's facility, with the target pressure being achieved in January 2005. Repeated runs at pressure were achieved, and optimization of the machine resulted in power reductions of 60% from the first successful pressure runs. General design layout of a commercial-scale unit was conducted, and preliminary cost estimates for a commercial unit obtained.

Derek L. Aldred; Timothy Saunders

2005-07-01T23:59:59.000Z

332

Achieve Continuous Injection of Solid Fuels into Advanced Combustion System Pressures  

SciTech Connect (OSTI)

The overall objective of this project is the development of a mechanical rotary-disk feeder, known as the Stamet Posimetric High Pressure Solids Feeder System, to demonstrate feeding of dry granular coal continuously and controllably into pressurized environments of up to 70 kg/cm2 (1,000 psi). This is the Phase III of the ongoing program. Earlier Phases 1 and II successfully demonstrated feeding into pressures up to 35 kg/cm{sup 2} (500 psi). The final report for those phases was submitted in April 2005. Based on the previous work done in Phases I & II using Powder River Basin coal provided by the PSDF facility in Wilsonville, AL, a Phase III feeder system was designed and built to accomplish the target of feeding the coal into a pressure of 70 kg/cm2 (1,000 psi) and to be capable of feed rates of up to 550 kilograms (1,200lbs) per hour. The drive motor system from Phase II was retained for use on Phase III since projected performance calculations indicated it should be capable of driving the Phase III pump to the target levels. The pump & motor system was installed in a custom built test rig comprising an inlet vessel containing an active live-wall hopper mounted on weigh cells in a support frame, transition into the pump inlet, transition from pump outlet and a receiver vessel containing a receiver drum supported on weigh cells. All pressure containment on the rig was rated to105 kg/cm{sup 2} (1,500psi) to accommodate the final pressure requirement of a proposed Phase IV of the program. A screw conveyor and batch hopper were added to transfer coal at atmospheric pressure from the shop floor up into the test rig to enable continuous feeding up to the capacity of the receiving vessel. Control & monitoring systems were up-rated from the Phase II system to cover the additional features incorporated in the Phase III rig, and provide closer control and expanded monitoring of the entire system. A program of testing and modification was carried out in Stamet's facility in CA, culminating in the first successful feeding of coal into the Phase III target of 70 kg/cm{sup 2} (1,000 psi) gas pressure in March 2007. Subsequently, repeated runs at pressure were achieved, and comparison of the data with Phase II results when adjusted for scale differences showed further power reductions of 40% had been achieved from the final Phase II pressure runs. The general design layout of a commercial-scale unit was conducted, and preliminary cost estimates made.

Derek L. Aldred; Timothy Saunders

2007-03-31T23:59:59.000Z

333

Subsidy schemes in EU t i M ti ti dcountries: Motivations and  

E-Print Network [OSTI]

) - Lithuania FIT Soft loans, exemptions from pollution tax Poland TGC RES exempted from excise tax Romania TGC 2008 Fi l d Sweden United Kingdom National RE Targets Poland Portugal Romania Slovenia Slovak Finland

334

How to Catch Up with the Industrial World--Achieving Rapid Growth in Europe's Transition Economies  

E-Print Network [OSTI]

performance of the less advanced EU economies--Greece, Ireland, Portugal, and Spain. Although Ireland, Portugal, and Spain each grew rapidly in the last five years of the 1980s, that proved to be a short phase in the past fifteen years, and Spain and Portugal grew very slowly in the early 1980s and the early 1990s

335

Achievement and Opportunity Gaps in Mathematics Education in Turkey Compared to European Union Countries  

E-Print Network [OSTI]

, and the United Kingdom. Greece entered the EU in 1981, followed by Portugal and Spain in 1986. Austria, Finland, and Sweden have been members since 19 1995. The largest membership cohort to date occurred in 2004 with the entry of the Czech Republic...

Yetkiner, Zeynep 1978-

2010-12-08T23:59:59.000Z

336

Achieving WIPP certification for software: A white paper  

SciTech Connect (OSTI)

The NMT-1 and NMT-3 organizations within the Chemical and Metallurgical Research (CMR) facility at the Los Alamos National Laboratory (LANL) is working to achieve Waste Isolation Pilot Plant (WIPP) certification to enable them to transport their TRU waste to WIPP. In particular, the NMT-1 management is requesting support from the Idaho National Engineering and Environmental Laboratory (INEEL) to assist them in making the Laboratory Information Management System (LIMS) software WIPP certifiable. Thus, LIMS must be compliant with the recognized software quality assurance (SQA) requirements stated within the QAPD. Since the Idaho National Engineering and Environmental Laboratory (INEEL) has achieved WIPP certification, INEEL personnel can provide valuable assistance to LANL by sharing lessons learned and recommendations. Thus, this white paper delineates the particular software quality assurance requirements required for WIPP certification.

Matthews, S.D.; Adams, K.; Twitchell, K.E.

1998-07-01T23:59:59.000Z

337

ACHIEVE is a system designed to support employee and organizational achievement, development and success. The system has three interrelated components: performance planning (setting goals),  

E-Print Network [OSTI]

1 ACHIEVE ACHIEVE is a system designed to support employee and organizational achievement), professional development, and reflection or learning from experience. Ongoing support and feedback throughout to achieve organizational success, individual goals must align with broader unit and organizational goals. 2

Brownstone, Rob

338

The RHIC Spin Program: Achievements and Future Opportunities  

E-Print Network [OSTI]

This document summarizes recent achievements of the RHIC spin program and their impact on our understanding of the nucleon's spin structure, i.e. the individual parton (quark and gluon) contributions to the helicity structure of the nucleon and to understand the origin of the transverse spin phenomena. Open questions are identified and a suite of future measurements with polarized beams at RHIC to address them is laid out. Machine and detector requirements and upgrades are briefly discussed.

E. C. Aschenauer; A. Bazilevsky; K. Boyle; K. O. Eyser; R. Fatemi; C. Gagliardi; M. Grosse-Perdekamp; John Lajoie; Zhongbo Kang; Yuri Kovchegov; John Koster; Itaru Nakagawa; Rodolfo Sassot; Ralf Seidl; Ernst Sichtermann; Marco Stratmann; Werner Vogelsang; Anselm Vossen; Scott W. Wissink; Feng Yuan

2013-04-17T23:59:59.000Z

339

Upside-Down Solar Cell Achieves Record Efficiencies (Fact Sheet)  

SciTech Connect (OSTI)

The inverted metamorphic multijunction (IMM) solar cell is an exercise in efficient innovation - literally, as the technology boasted the highest demonstrated efficiency for converting sunlight into electrical energy at its debut in 2005. Scientists at the National Renewable Energy Laboratory (NREL) inverted the conventional photovoltaic (PV) structure to revolutionary effect, achieving solar conversion efficiencies of 33.8% and 40.8% under one-sun and concentrated conditions, respectively.

Not Available

2010-12-01T23:59:59.000Z

340

White LED Benchmark of 65 Lumens Per Watt Achieved  

Broader source: Energy.gov [DOE]

Novel chip design and the balance of multiple interrelated design parameters have enabled Cree, Inc.'s Santa Barbara Technology Center to demonstrate white LEDs with efficacies greater than 65 lumens per watt at 350 mA. The results are particularly significant because they were achieved with a pre-production prototype chip using the same package used in Cree's commercially available XLamp® 7090 high power LED, rather than a laboratory device.

Note: This page contains sample records for the topic "achieving eu targets" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

New Efficiency Record Achieved for White OLED Device  

Broader source: Energy.gov [DOE]

Osram Opto-Semiconductors, Inc. has successfully demonstrated a white organic light emitting diode (OLED) with a record efficiency of 25 lumens per watt, the highest known efficiency achieved to date for a polymer-based white OLED. The 25 LPW cool-white-emitting device was produced by applying a standard external inorganic phosphor to Osram's record-breaking blue-emitting phosphorescent polymer device with a peak luminous efficacy of 14 LPW.

342

Gas Turbine Fired Heater Integration: Achieve Significant Energy Savings  

E-Print Network [OSTI]

GAS TURBINE FIRED HEATER INTEGRATION: ACHIEVE SIGNIFICANT ENERGY SAVINGS G. Iaquaniello**, P. Pietrogrande* *KTI Corp., Research and Development Division, Monrovia, California **KTI SpA, Rome, Italy ABSTRAer Faster payout will result if gas... as in steam turbines. A specific example of how cogeneration can work in this way is in the integration of a gas turbine with a fired heater as shown in Figure 2. Electrical or mechanical power is delivered by the gas turbine while the exhaust combustion...

Iaquaniello, G.; Pietrogrande, P.

343

Achieving and Demonstrating FreedomCAR Engine Fuel Efficiency Goals  

Energy Savers [EERE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustionImprovement3 Beryllium-Associated6-05.pdfATTENDEEES:Supplythe Waste IsolationAchieving

344

Cascaded target normal sheath acceleration  

SciTech Connect (OSTI)

A cascaded target normal sheath acceleration (TNSA) scheme is proposed to simultaneously increase energy and improve energy spread of a laser-produced mono-energetic proton beam. An optimum condition that uses the maximum sheath field to accelerate the center of the proton beam is theoretically found and verified by two-dimensional particle-in-cell simulations. An initial 10 MeV proton beam is accelerated to 21 MeV with energy spread decreased from 5% to 2% under the optimum condition during the process of the cascaded TNSA. The scheme opens a way to scale proton energy lineally with laser energy.

Wang, W. P.; Shen, B. F.; Zhang, X. M.; Wang, X. F.; Xu, J. C.; Zhao, X. Y.; Yu, Y. H.; Yi, L. Q.; Shi, Y.; Zhang, L. G.; Xu, T. J.; Xu, Z. Z. [State Key Laboratory of High Field Laser Physics, Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, Shanghai 201800 (China)] [State Key Laboratory of High Field Laser Physics, Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, Shanghai 201800 (China)

2013-11-15T23:59:59.000Z

345

as a Strategy for Supporting Student Academic Achievement  

E-Print Network [OSTI]

study explored the relationships between school counselors ' motivational orientation, perceptions of the importance, and levels of implementation of Academic and Personal/Social Development Standards as a strategy for supporting academic achievement. A secure online survey was sent to 539 Virginia elementary school counselors; 212 completed the questionnaire reflecting a response rate of 39%. Participants rated their perceptions of the importance and their levels of implementation of 26 Virginia Academic and Personal/Social Development Standards (Virginia Department of Education, 2004). The Situational Motivation Scale (SIMS; Guay, Vallerand, & Blanchard, 2000) assessed participants ’ type of motivation for incorporating personal/social development interventions into their programs as a strategy for supporting academic achievement. Participants ’ ratings confirm both types of Standards are perceived as highly important for supporting academic achievement and are implemented at relatively high levels. A correlation matrix demonstrated three of the four motivation scores were not related to either perceptions of importance or to levels of implementation of either type of Virginia Standard. Four regression models indicated that the motivation predictor variables accounted for no more

Jennifer S. Barna; Falls Church Virginia; Jennifer S. Barna

2009-01-01T23:59:59.000Z

346

Targets and processes for fabricating same  

DOE Patents [OSTI]

In particular embodiments, the present disclosure provides targets including a metal layer and defining a hollow inner surface. The hollow inner surface has an internal apex. The distance between at least two opposing points of the internal apex is less than about 15 .mu.m. In particular examples, the distance is less than about 1 .mu.m. Particular implementations of the targets are free standing. The targets have a number of disclosed shaped, including cones, pyramids, hemispheres, and capped structures. The present disclosure also provides arrays of such targets. Also provided are methods of forming targets, such as the disclosed targets, using lithographic techniques, such as photolithographic techniques. In particular examples, a target mold is formed from a silicon wafer and then one or more sides of the mold are coated with a target material, such as one or more metals.

Cowan, Thomas (Dresden, DE); Malekos, Steven (Reno, NV); Korgan, Grant (Reno, NV); Adams, Jesse (Reno, NV); Sentoku, Yasuhiko (Reno, NV); Le Galloudec, Nathalie (Reno, NV); Fuchs, Julien (Paris, FR)

2012-07-24T23:59:59.000Z

347

Review of the Renewable Energy Target  

E-Print Network [OSTI]

Review of the Renewable Energy Target Response to Expert Panel's Call for Submissions Paper #12;NSW Government Submission to the Review of the Renewable Energy Target, May 2014 2/20 Contents EXECUTIVE SUMMARY........................................................................................................................... 3 RENEWABLE ENERGY IN NSW

Peters, Richard

348

Qualified Target Industry Tax Refund (Florida)  

Broader source: Energy.gov [DOE]

The Qualified Target Industry Tax Refund incentive is available for companies that create high wage jobs in targeted high value-added industries. The incentive refunds up to $3,000 per new full...

349

Nanoparticles for targeting the infarcted heart  

E-Print Network [OSTI]

We report a nanoparticulate system capable of targeting the heart after myocardial infarction (MI). Targeting is based on overexpression of angiotensin II type 1 (AT1) receptor in the infarcted heart. Liposomes 142 nm in ...

Dvir, Tal

350

Study of optical parameters of the Se-As chalcogenide semiconductor system containing EuF{sub 3} impurities  

SciTech Connect (OSTI)

Optical properties of chalcogenide vitreous semiconductors of composition Se{sub 95}As{sub 5} containing different amounts of rare-earth metal fluorides (EuF{sub 3}) are studied, and, on this basis, the fundamental parameters, such as the refractive index and extinction coefficient, are determined. The dependences of these parameters on the content of EuF{sub 3} molecules are nonmonotonic: the low content (below 0.25 at %) aids in decreasing the parameters, whereas the high content tends to increase them. From the analysis of the results with consideration for the structural features of chalcogenide vitreous semiconductors of the Se{sub 95}As{sub 5} system (the presence of ordered high-coordinated microregions separated from each other by regions with a lower atomic density), it is concluded that the optical properties of the chalcogenide vitreous semiconductor system under study can be described in the context of Penn's model.

Isayev, A. I.; Mekhtiyeva, S. I.; Garibova, S. N., E-mail: sgaribova@rambler.ru; Alekperov, R. I.; Zeynalov, V. Z. [Azerbaijan National Academy of Sciences, Abdullaev Institute of Physics (Azerbaijan)

2011-08-15T23:59:59.000Z

351

Visualization of Target Inspection data at the National Ignition Facility  

SciTech Connect (OSTI)

As the National Ignition Facility continues its campaign to achieve ignition, new methods and tools will be required to measure the quality of the target capsules used to achieve this goal. Techniques have been developed to measure capsule surface features using a phase-shifting diffraction interferometer and Leica Microsystems confocal microscope. These instruments produce multi-gigabyte datasets which consist of tens to hundreds of files. Existing software can handle viewing a small subset of an entire dataset, but none can view a dataset in its entirety. Additionally, without an established mode of transport that keeps the target capsules properly aligned throughout the assembly process, a means of aligning the two dataset coordinate systems is needed. The goal of this project is to develop web based software utilizing WebGL which will provide high level overview visualization of an entire dataset, with the capability to retrieve finer details on demand, in addition to facilitating alignment of multiple datasets with one another based on common features that have been visually identified by users of the system.

Potter, D; Antipa, N

2012-02-16T23:59:59.000Z

352

Development of granular target for CADS  

E-Print Network [OSTI]

Subcritical core/blanket #12;· Solid target options, which consist of a solid material in the form of rods 5L/s Width of Lacuna 7cm #12;CW-316LSS The free surface in windowless target Water loop test-Parallel CFD (GPU) for Beam-Target-Coupled 15360 cores Test by the electron beam coupled with water Annular

McDonald, Kirk

353

Reforming TSOs: using the 'third package' Legislation to promote efficiency and accelerate regional integration in EU wholesale power markets  

SciTech Connect (OSTI)

The EU is developing new legislation - the so-called ''Third Package'' - to foster competition in its electric power markets. These proposals could be improved by adding more focus on regional integration of wholesale power markets, allowing more leeway for arrangements that fit the diverse existing patterns of transmission ownership and control, and addressing upfront new regulatory concerns that arise when transmission is divested as an independent, for-profit business. (author)

Moselle, Boaz

2008-10-15T23:59:59.000Z

354

Electron nuclear double resonance study of photostimulated luminescence active centers in CsBr:Eu{sup 2+} medical imaging plates  

SciTech Connect (OSTI)

CsBr:Eu{sup 2+} needle image plates exhibit an electron-paramagnetic-resonance (EPR) spectrum at room temperature (RT), whose intensity is correlated with the photostimulated luminescence sensitivity of the plate. This EPR spectrum shows a strong temperature dependence: At RT it is owing to a single Eu{sup 2+} (S =7/2) center with axial symmetry, whereas at T<35 K the spectra can only be explained when two distinct centers are assumed to be present, a minority axial center and a majority center with nearly extremely rhombic symmetry. In this paper these low-temperature centers are studied with electron nuclear double resonance (ENDOR) spectroscopy, which reveals the presence of {sup 1}H nuclei close to the central Eu{sup 2+} ions in the centers. Analysis of the angular dependence of the ENDOR spectra allows to propose models for these centers, providing an explanation for the observed difference in intensity between the spectral components and for their temperature dependence.

Vrielinck, H.; Loncke, F.; Matthys, P.; Callens, F. [Department of Solid State Sciences, Ghent University, Krijgslaan 281-S1, B-9000 Gent (Belgium); Tahon, J.-P.; Leblans, P. [Agfa HealthCare NV, Septestraat 27, B-2640 Mortsel (Belgium)

2011-02-01T23:59:59.000Z

355

Greenidge multi-pollutant project achieves emissions reduction goals  

SciTech Connect (OSTI)

Performance testing at the Greenridge Multi-Pollutant Project has met or exceeded project goals, indicating that deep emission reduciton sin small, difficult-to-retrofit power plants can be achieved. The technology fitted at the 107 MWe AES Greenridge Unit 4 includes a hybrid selective non-catalytic reduction/selective catalytic reduction system for NOx control (NOxOUT CASCADE) and a Turbosorp circulating fluidized bed dry scrubber system for SO{sub 2}, mercury, SO{sub 3} HC and Hf control. 2 figs.

NONE

2008-07-01T23:59:59.000Z

356

Los Alamos achieves 20-year low on radioactive air emissions  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas Conchas recovery challenge fund Las Conchas recovery challenge fund LosLANL achieves

357

Los Alamos achieves world-record pulsed magnetic field  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas Conchas recovery challenge fund Las Conchas recovery challenge fund LosLANL achievesLos

358

Sandia National Laboratories: Achieving High Pernetrations of PV  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 -the Mid-Infrared0 ResourceAwardsSafeguardsEngineersSandia/New MexicoAchieving High

359

Therapeutic target for protozoal diseases  

DOE Patents [OSTI]

A novel Fasciclin Related Adhesive Protein (FRAP) from Plasmodium and related parasites is provided as a target for therapeutic intervention in diseases caused by the parasites. FRAP has been shown to play a critical role in adhesion to, or invasion into, host cells by the parasite. Furthermore, FRAP catalyzes the neutralization of heme by the parasite, by promoting its polymerization into hemozoin. This invention provides methods and compositions for therapies based on the administration of protein, DNA or cell-based vaccines and/or antibodies based on FRAP, or antigenic epitopes of FRAP, either alone or in combination with other parasite antigens. Methods for the development of compounds that inhibit the catalytic activity of FRAP, and diagnostic and laboratory methods utilizing FRAP are also provided.

Rathore, Dharmendar (Blacksburg, VA); Jani, Dewal (Blacksburg, VA); Nagarkatti, Rana (Blacksburg, VA)

2008-10-21T23:59:59.000Z

360

Fabrication of boron sputter targets  

DOE Patents [OSTI]

A process for fabricating high density boron sputtering targets with sufficient mechanical strength to function reliably at typical magnetron sputtering power densities and at normal process parameters. The process involves the fabrication of a high density boron monolithe by hot isostatically compacting high purity (99.9%) boron powder, machining the boron monolithe into the final dimensions, and brazing the finished boron piece to a matching boron carbide (B.sub.4 C) piece, by placing aluminum foil there between and applying pressure and heat in a vacuum. An alternative is the application of aluminum metallization to the back of the boron monolithe by vacuum deposition. Also, a titanium based vacuum braze alloy can be used in place of the aluminum foil.

Makowiecki, Daniel M. (Livermore, CA); McKernan, Mark A. (Livermore, CA)

1995-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "achieving eu targets" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Ignition of deuterium-trtium fuel targets  

DOE Patents [OSTI]

A method of igniting a deuterium-tritium ICF fuel target to obtain fuel burn in which the fuel target initially includes a hollow spherical shell having a frozen layer of DT material at substantially uniform thickness and cryogenic temperature around the interior surface of the shell. The target is permitted to free-fall through a target chamber having walls heated by successive target ignitions, so that the target is uniformly heated during free-fall to at least partially melt the frozen fuel layer and form a liquid single-phase layer or a mixed liquid/solid bi-phase layer of substantially uniform thickness around the interior shell surface. The falling target is then illuminated from exteriorly of the chamber while the fuel layer is at substantially uniformly single or bi-phase so as to ignite the fuel layer and release energy therefrom.

Musinski, Donald L. (Saline, MI); Mruzek, Michael T. (Britton, MI)

1991-01-01T23:59:59.000Z

362

Ignition of deuterium-tritium fuel targets  

DOE Patents [OSTI]

Disclosed is a method of igniting a deuterium-tritium ICF fuel target to obtain fuel burn in which the fuel target initially includes a hollow spherical shell having a frozen layer of DT material at substantially uniform thickness and cryogenic temperature around the interior surface of the shell. The target is permitted to free-fall through a target chamber having walls heated by successive target ignitions, so that the target is uniformly heated during free-fall to at least partially melt the frozen fuel layer and form a liquid single-phase layer or a mixed liquid/solid bi-phase layer of substantially uniform thickness around the interior shell surface. The falling target is then illuminated from exteriorly of the chamber while the fuel layer is at substantially uniformly single or bi-phase so as to ignite the fuel layer and release energy therefrom. 5 figures.

Musinski, D.L.; Mruzek, M.T.

1991-08-27T23:59:59.000Z

363

Cold warriors target arms control  

SciTech Connect (OSTI)

While disagreements over the conflict in Bosnia have strained US relations with Western Europe and Russia, these divisions will pale in comparison to the tensions that will arise if recent congressional arms control decisions become law. If the Republicans who dominate Congress are successful, a series of arms control agreements painstakingly negotiated by Republican and Democratic presidents could be consigned to the ash heap. This list includes the Start I and Start II nuclear reduction agreements, the 1972 Anti-Ballistic Missile (ABM) Treaty and the ongoing negotiations to achieve a comprehensive test ban (CTB) by 1996. US leadership in the post-Cold War era will undermined as the international community, already skeptical about this country`s direction, will question the ability of the executive branch to surmount isolantionist impulses.

Isaacs, J.

1995-09-01T23:59:59.000Z

364

Environmental Management System (EMS) objectives & targets : annual results summary %3CU%2B2013%3E FY10.  

SciTech Connect (OSTI)

Sandia National Laboratory/New Mexico's (SNL/NM) Environmental Management System is the integrated approach for members of the workforce to identify and manage environmental risks. Each fiscal year (FY) significant environmental aspects are identified and the environmental programs associated with them are charged with the task of routinely monitoring and measuring the objectives and targets that are designed to mitigate the impact of SNL/NM's operations on the environment. An annual summary of the results achieved towards meeting established objectives and targets provides a connection to and rational for annually revised significant aspects. The purpose of this document is to summarize the results achieved and documented in FY2010.

Waffelaert, Pascale S.; Vetter, Douglas Walter

2011-05-01T23:59:59.000Z

365

Explanations of FreedomCAR/DOE Hydrogen Storage Technical Targets...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Explanations of FreedomCARDOE Hydrogen Storage Technical Targets Explanations of FreedomCARDOE Hydrogen Storage Technical Targets Summary of FreedomCAR Targets and Basis for...

366

The study of downstream targets and other characteristics of NTT  

E-Print Network [OSTI]

SAN DIEGO The Study of Downstream Targets and OtherOF THE THESIS The Study of Downstream Targets and Othera number of putative downstream targets of NTT, including

Fung, Michelle W.

2009-01-01T23:59:59.000Z

367

Independent Oversight Targeted Review, Y-12 National Security...  

Office of Environmental Management (EM)

Targeted Review, Y-12 National Security Complex - February 2012 Independent Oversight Targeted Review, Y-12 National Security Complex - February 2012 February 2012 Targeted Review...

368

Independent Oversight Targeted Review, Oak Ridge National Laboratory...  

Office of Environmental Management (EM)

Targeted Review, Oak Ridge National Laboratory - April 2014 Independent Oversight Targeted Review, Oak Ridge National Laboratory - April 2014 April 2014 Targeted Review of...

369

achieve defect-free structurally: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

covering stories at the Governor town boy who achieved great things, but never forgot his roots." - James B. Hunt, former governor 266 Achievable Rates for the Gaussian...

370

Progress on achieving the ICF conditions needed for high gain  

SciTech Connect (OSTI)

Progress during the past two years has moved us much closer to demonstrating the scientific and technological requirements for high gain ICF in the laboratory. This progress has been made possible by operating at the third harmonic of 1..mu..m light which dramatically reduces concern about hot electrons and by advances in diagnostics such as 100 ps x-ray framing cameras which greatly increase the data available from each experiment. Making use of many of these new capabilities, major improvements in confinement conditions have been achieved for ICF implosions. In particular, in an optimized hohlraum on Nova, radiation driven implosions with convergence ratio in excess of 30 (volume compression /approximately/3 /times/ 10/sup 4/) have performed essentially as predicted by spherical implosion calculations. This paper presents these results as well as examples of advances in several other areas and discusses the implications for the future of ICF with lasers and heavy ion beam drivers. 8 refs., 10 figs.

Lindl, J.D.

1988-12-23T23:59:59.000Z

371

Reactor emergency preparedness: lifesaving or as low as reasonable achievable  

SciTech Connect (OSTI)

An emergency is defined as an unforseen combination of circumstances or the resultant state that calls for immediate action. Although not explicitly indicated, the implication is that the action is intended to protect life, limb and or property from extreme peril. For the most part, the kind and extent of the emergency planning required under current regulations of the USNRC do not appear to be so much related to emergencies (within the above definition) as they do toward the reduction of the off-site radiation doses from uncontrolled releases during reactor accident conditions to as low as reasonably achievable levels. Not only do the latter appear to be of questionable cost-effectiveness, but in their extent and complexity beyond normal disaster planning they may in fact be counter productive to optimum public safety.

Hull, A.P.

1981-01-01T23:59:59.000Z

372

Tensor Target Polarization at TRIUMF  

SciTech Connect (OSTI)

The first measurements of tensor observables in $\\pi \\vec{d}$ scattering experiments were performed in the mid-80's at TRIUMF, and later at SIN/PSI. The full suite of tensor observables accessible in $\\pi \\vec{d}$ elastic scattering were measured: $T_{20}$, $T_{21}$, and $T_{22}$. The vector analyzing power $iT_{11}$ was also measured. These results led to a better understanding of the three-body theory used to describe this reaction. %Some measurements were also made in the absorption and breakup channels. A direct measurement of the target tensor polarization was also made independent of the usual NMR techniques by exploiting the (nearly) model-independent result for the tensor analyzing power at 90$^\\circ _{cm}$ in the $\\pi \\vec{d} \\rightarrow 2p$ reaction. This method was also used to check efforts to enhance the tensor polarization by RF burning of the NMR spectrum. A brief description of the methods developed to measure and analyze these experiments is provided.

Smith, G

2014-10-27T23:59:59.000Z

373

Bridgman Growth of Large SrI2:Eu2+ Single Crystals: A High-performance Scintillator for Radiation Detection Applications  

SciTech Connect (OSTI)

Single-crystal strontium iodide (SrI2) doped with relatively high levels (e.g., 3 - 6 %) of Eu2+ exhibits characteristics that make this material superior, in a number of respects, to other scintillators that are currently used for radiation detection. Specifically, SrI2:Eu2+ has a light yield that is significantly higher than LaBr3:Ce3+ -a currently employed commercial high-performance scintillator. Additionally, SrI2:Eu2+ is characterized by an energy resolution as high as 2.6% at the 137Cs gamma-ray energy of 662 keV, and there is no radioactive component in SrI2:Eu2+ - unlike LaBr3:Ce3+ that contains 138La. The Ce3+-doped LaBr3 decay time is, however, faster (30 nsec) than the 1.2 sec decay time of SrI2:Eu2+. Due to the relatively low melting point of strontium iodide (~515 oC), crystal growth can be carried out in quartz crucibles by the vertical Bridgman technique. Materials-processing and crystal-growth techniques that are specific to the Bridgman growth of europium-doped strontium iodide scintillators are described here. These techniques include the use of a porous quartz frit to physically filter the molten salt from a quartz antechamber into the Bridgman growth crucible and the use of a bent or bulb grain selector design to suppress multiple grain growth. Single crystals of SrI2:Eu2+ scintillators with good optical quality and scintillation characteristics have been grown in sizes up to 5.0 cm in diameter by applying these techniques. Other aspects of the SrI2:Eu2+ crystal-growth methods and of the still unresolved crystal-growth issues are described here.

Boatner, Lynn A [ORNL; Ramey, Joanne Oxendine [ORNL; Kolopus, James A [ORNL; Hawrami, Rastgo [Radiation Monitoring Devices, Watertown, MA; Higgins, William [Radiation Monitoring Devices, Watertown, MA; Van Loef, Edgar [Radiation Monitoring Devices, Watertown, MA; Glodo, J. [Radiation Monitoring Devices, Watertown, MA; Shah, Kanai [Radiation Monitoring Devices, Watertown, MA; Bhattacharya, P. [Fisk University, Nashville, TN; Tupitsyn, E [Fisk University, Nashville, TN; Groza, Michael [Fisk University, Nashville, TN; Burger, Arnold [Fisk University, Nashville, TN

2013-01-01T23:59:59.000Z

374

Moller Polarimetry with Atomic Hydrogen Targets  

SciTech Connect (OSTI)

A proposal to use polarized atomic hydrogen gas as the target for electron beam polarimetry based on the Moller scattering is described. Such a gas, stored in an ultra-cold magnetic trap, would provide a target of practically 100\\% polarized electrons. It is conceivable to reach a $\\sim$0.3\\% systematic accuracy of the beam polarimetry with such a target. Feasibility studies for the CEBAF electron beam have been performed.

Chudakov, Eugene [Thomas Jefferson National Accelerator Facility, Newport News, VA (United States); Luppov, V. [University of Michigan Spin Physics Center, Ann Arbor, MI (United States)

2012-06-01T23:59:59.000Z

375

The Role of Technology for Achieving Climate Policy Objectives: Overview of the EMF 27 Study on Technology Strategies and Climate Policy Scenarios  

SciTech Connect (OSTI)

This article presents the synthesis of results from the Stanford Energy Modeling Forum Study 27, an inter-comparison of 19 energy-economy and integrated assessment models. The study investigated the value of individual mitigation technologies such as energy intensity improvements, carbon capture and sequestration (CCS), nuclear power, solar and wind power and bioenergy for climate mitigation. Achieving atmospheric greenhouse gas concentration targets at 450 and 550 ppm CO2 equivalent requires massive greenhouse gas emissions reductions. A fragmented policy approach at the level of current ambition is inconsistent with these targets. The availability of a negative emissions technology, in most models biofuels with CCS, proved to be a key element for achieving the climate targets. Robust characteristics of the transformation of the energy system are increased energy intensity improvements and the electrification of energy end use coupled with a fast decarbonization of the electricity sector. Non-electric energy end use is hardest to decarbonize, particularly in the transport sector. Technology is a key element of climate mitigation. Versatile technologies such as CCS and bioenergy have largest value, due in part to their combined ability to produce negative emissions. The individual value of low-carbon power technologies is more limited due to the many alternatives in the sector. The scale of the energy transformation is larger for the 450 ppm than for the 550 ppm CO2e target. As a result, the achievability and the costs of the 450 ppm target are more sensitive to variations in technology variability. Mitigation costs roughly double when moving from 550 ppm to 450 ppm CO2e, but remain below 3% of GDP for most models.

Kriegler, Elmar; Weyant, John; Blanford, Geoffrey J.; Krey, Volker; Clarke, Leon E.; Edmonds, James A.; Fawcett, Allen A.; Luderer, Gunnar; Riahi, Keywan; Richels, Richard G.; Rose, Steven; Tavoni, Massimo; Van Vuuren, Detlef

2014-04-01T23:59:59.000Z

376

DOE Program/Targets and Workshop Objectives  

Broader source: Energy.gov (indexed) [DOE]

Nancy Garland DOE Hydrogen Program Fuel Cell Operation at Sub- Freezing Temperatures DOE ProgramTargets and Workshop Objectives Sub-Freezing Temperature Effects on Fuel Cells...

377

Enterprise Assessments, Lessons Learned from Targeted Reviews...  

Energy Savers [EERE]

purpose of these targeted assessments was to evaluate the flowdown of occupational radiation protection program requirements into work planning, control, and execution...

378

Deep Vadose Zone Remediation: Technical and Policy Challenges, Opportunities, and Progress in Achieving Cleanup Endpoints  

SciTech Connect (OSTI)

Current requirements for site remediation and closure are standards-based and are often overly conservative, costly, and in some cases, technically impractical. Use of risk-informed alternate endpoints provides a means to achieve remediation goals that are permitted by regulations and are protective of human health and the environment. Alternate endpoints enable the establishment of a path for cleanup that may include intermediate remedial milestones and transition points and/or regulatory alternatives to standards-based remediation. A framework is presented that is centered around developing and refining conceptual models in conjunction with assessing risks and potential endpoints as part of a system-based assessment that integrates site data with scientific understanding of processes that control the distribution and transport of contaminants in the subsurface and pathways to receptors. This system-based assessment and subsequent implementation of the remediation strategy with appropriate monitoring are targeted at providing a holistic approach to addressing risks to human health and the environment. This holistic approach also enables effective predictive analysis of contaminant behavior to provide defensible criteria and data for making long-term decisions. Developing and implementing an alternate endpoint-based approach for remediation and waste site closure presents a number of challenges and opportunities. Categories of these challenges include scientific and technical, regulatory, institutional, and budget and resource allocation issues. Opportunities exist for developing and implementing systems-based approaches with respect to supportive characterization, monitoring, predictive modeling, and remediation approaches.

Wellman, Dawn M.; Freshley, Mark D.; Truex, Michael J.; Lee, Michelle H.

2013-02-24T23:59:59.000Z

379

RE/ZrO{sub 2} (RE = Sm, Eu) composite oxide nano-materials: Synthesis and applications in photocatalysis  

SciTech Connect (OSTI)

Graphical abstract: - Highlights: • RE/ZrO{sub 2} (RE = Sm, Eu) nano-materials have been successfully synthesized. • Defect and electron structures determine the absorption properties on visible light. • Nano-sized Zr{sub 0.8}Sm{sub 0.2}O{sub 2??} has good visible-light-responsive photocatalytic activities. • In the future, it can be used in wastewater treatment and environmental protection. - Abstract: Zirconia modified by Samarium/Europium, RE/ZrO{sub 2} (RE = Sm, Eu), composite oxide nano-materials have been successfully synthesized by improved sol–gel method. Characterization results show that X-ray diffraction (XRD) peaks of products gradually shift to the lower angle with the increase of rare earth which implies that the lattice distances of RE/ZrO{sub 2} nano-materials are gradually enlarged. Moreover, the molar ratios between zirconium and rare earth are consistent with the chemical formula and both of them are uniformly distributed in samples. Optical properties indicate that defect structures and electron configurations of RE/ZrO{sub 2} (RE = Sm, Eu) with single phase determine their absorption properties on visible light. Photocatalytic experiments indicate Zr{sub 0.8}Sm{sub 0.2}O{sub 2??} nano-crystals have excellent visible-light-responsive photocatalytic activities on Methylene blue and Rhodamine B which results from the special defect structure, suitable electronic configuration, and larger specific surface area. It follows that Zr{sub 0.8}Sm{sub 0.2}O{sub 2??} nano-crystals are new visible-light-responsive photocatalysts which can be applied in dye wastewater treatment and environmental protection in the future.

Du, Weimin, E-mail: duweimin75@gmail.com [College of Chemistry and Chemical Engineering, Anyang Normal University, Anyang, Henan 455002 (China); Zhu, Zhaoqiang [College of Chemistry and Chemical Engineering, Anyang Normal University, Anyang, Henan 455002 (China); College of Chemistry and Molecular Engineering, Zhengzhou University, Zhengzhou, Henan 450001 (China); Zhang, Xiaofen; Wang, Dacheng; Liu, Donghe [College of Chemistry and Chemical Engineering, Anyang Normal University, Anyang, Henan 455002 (China); Qian, Xuefeng [School of Chemistry and Chemical Technology, Shanghai Jiao Tong University, Shanghai 200240 (China); Du, Jimin, E-mail: djm@aynu.edu.cn [College of Chemistry and Chemical Engineering, Anyang Normal University, Anyang, Henan 455002 (China)

2013-10-15T23:59:59.000Z

380

Synthesis and photoluminescence properties of NaLaMgWO{sub 6}:RE{sup 3+} (RE = Eu, Sm, Tb) phosphor for white LED application  

SciTech Connect (OSTI)

Highlights: ? NaLa{sub 1?x}MgWO{sub 6}:xRE{sup 3+} phosphors were synthesized by solid-state reaction method. ? Compared with Y{sub 2}O{sub 3}:Eu{sup 3+}, NaLaMgWO{sub 6}:Eu{sup 3+} performed better luminescence properties. ? The results demonstrated NaLaMgWO{sub 6} as a suitable host for RE{sup 3+}-doping. -- Abstract: Single phase of NaLa{sub 1?x}MgWO{sub 6}:xRE{sup 3+} (0 < x ?1) (RE = Eu, Sm, Tb) phosphors were prepared by solid-state reaction method. X-ray diffraction, scanning electron microscopy, the morphology energy-dispersive X-ray spectroscopy, UV–vis diffuse reflectance spectra and photoluminescence were used to characterize the samples. Under the light excitation, NaLaMgWO{sub 6}:Eu{sup 3+}, NaLaMgWO{sub 6}:Sm{sup 3+} and NaLaMgWO{sub 6}:Tb{sup 3+}, phosphors showed the characteristic emissions of Eu{sup 3+} ({sup 5}D{sub 0} ? {sup 7}F{sub 4,3,2,1}), Sm{sup 3+} ({sup 4}G{sub 5/2} ? {sup 6}H{sub 5/2,7/2,9/2}), and Tb{sup 3+} ({sup 5}D{sub 4} ? {sup 7}F{sub 6,5,4,3}), respectively. The intensity of the red emission for Na(La{sub 0.6}Eu{sub 0.4})MgWO{sub 6} is 2.5 times higher than that of (Y{sub 0.95}Eu{sub 0.05}){sub 2}O{sub 3} under blue light irradiation. The quantum efficiencies of the entitled phosphors excited under 394 nm and 464 nm are also investigated and compared with commercial phosphors Y{sub 2}O{sub 3}:Eu{sup 3+}, Sr{sub 2}Si{sub 5}N{sub 8}:Eu{sup 2+} and Y{sub 3}A{sub 5}G{sub 12}:Ce{sup 3+}. The results demonstrated NaLaMgWO{sub 6}:RE{sup 3+} phosphors as potential candidates for white light emitting diode pumped by UV or blue chip.

Hou, Jingshan [College of Materials Science and Engineering, Dong Hua University, Shanghai 200051 (China) [College of Materials Science and Engineering, Dong Hua University, Shanghai 200051 (China); CAS Key Laboratory of Materials for Energy Conversion, Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai 200050 (China); College of Chemistry and Molecular Engineering, Peking University, Beijing 100871 (China); Yin, Xin [CAS Key Laboratory of Materials for Energy Conversion, Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai 200050 (China) [CAS Key Laboratory of Materials for Energy Conversion, Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai 200050 (China); College of Chemistry and Molecular Engineering, Peking University, Beijing 100871 (China); Huang, Fuqiang, E-mail: huangfq@mail.sic.ac.cn [CAS Key Laboratory of Materials for Energy Conversion, Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai 200050 (China) [CAS Key Laboratory of Materials for Energy Conversion, Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai 200050 (China); College of Chemistry and Molecular Engineering, Peking University, Beijing 100871 (China); Jiang, Weizhong, E-mail: jwzh@dhu.edu.cn [College of Materials Science and Engineering, Dong Hua University, Shanghai 200051 (China)] [College of Materials Science and Engineering, Dong Hua University, Shanghai 200051 (China)

2012-06-15T23:59:59.000Z

Note: This page contains sample records for the topic "achieving eu targets" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Superconducting and magnetic properties of a new EuAsFeO0.85F0.15 superconductor  

E-Print Network [OSTI]

Polycrystalline samples of a new superconducting EuAsFeO0.85F0.15 compound with critical temperature Tc=11K were prepared by solid state synthesis. Its electric and magnetic properties have been investigated in magnetic fields from 0.1 to 140000 Oe. Critical magnetic fields Hc1, and Hc2 were measured and hence the magnetic penetration depths and the coherence length have been estimated. The temperature dependence Hc2 (T) exhibits clear hyperbolic - type behavior starting with the lowest fields. The data derived were used to estimate probable high Tc and Hc2 in compounds doped with rare-earths having small atomic radii.

V. M. Dmitriev; I. E. Kostyleva; E. P. Khlybov; A. J. Zaleski; A. V. Terekhov; L. F. Rybaltchenko; E. V. Khristenko; L. A. Ishchenko

2009-01-16T23:59:59.000Z

382

Method of achieving the controlled release of thermonuclear energy  

DOE Patents [OSTI]

A method of achieving the controlled release of thermonuclear energy by illuminating a minute, solid density, hollow shell of a mixture of material such as deuterium and tritium with a high intensity, uniformly converging laser wave to effect an extremely rapid build-up of energy in inwardly traveling shock waves to implode the shell creating thermonuclear conditions causing a reaction of deuterons and tritons and a resultant high energy thermonuclear burn. Utilizing the resulting energy as a thermal source and to breed tritium or plutonium. The invention also contemplates a laser source wherein the flux level is increased with time to reduce the initial shock heating of fuel and provide maximum compression after implosion; and, in addition, computations and an equation are provided to enable the selection of a design having a high degree of stability and a dependable fusion performance by establishing a proper relationship between the laser energy input and the size and character of the selected material for the fusion capsule.

Brueckner, Keith A. (Ann Arbor, MI)

1986-01-01T23:59:59.000Z

383

Multiphase Nano-Composite Coatings for Achieving Energy Optimization  

SciTech Connect (OSTI)

UES Inc. and ANL teamed in this work to develop novel coating systems for the protection of surfaces from thermal degradation mainly in two applications; Machining and Die casting. These coatings were specifically designed for the purpose by incorporating required material phases and the overall architecture, which led to reduce the energy usage and increase efficiency of the operations. Following the UES/ANL'Â?s feasibility work, the coatings were developed utilizing High power impulse magnetron sputtering (HiPMS) and Large area filtered arc deposition (LAFAD) techniques. Toughness, hardness and oxidation resistance: contrasting qualities have been mixed in the right proportion to attain the suitable material characteristic for the cause. Hafnium diboride (HfB2) based materials provided such a system and its properties were tamed to attain the right combination of toughness and hardness by working on the microstructure and architecture of coatings. An effective interfacing material (graded concentrations of topcoat) was also achieved in this work to provide the required adhesion between the substrate and the coating. Combination of an appropriate bond coat and a functional top coat provided the present thermal degradation resistant coating for cutting tools and die-casting applications. Laboratory level performance tests and industrial level application tests by partner companies (Beta Site Testing) were used for the development of these coatings.

Dr. Jose Nainaparampil

2012-03-26T23:59:59.000Z

384

Novel strategies for ultrahigh specific activity targeted nanoparticles  

SciTech Connect (OSTI)

We have developed novel strategies optimized for preparing high specific activity radiolabeled nanoparticles, targeting nuclear imaging of low abundance biomarkers. Several compounds have been labeled with F-18 and Cu-64 for radiolabeling of SCK-nanoparticles via Copper(I) catalyzed or copper-free alkyne-azide cyclolization. Novel strategies have been developed to achieve ultrahigh specific activity with administrable amount of dose for human study using copper-free chemistry. Ligands for carbonic anhydrase 12 (CA12), a low abundance extracellular biomarker for the responsiveness of breast cancer to endocrine therapie, have been labeled with F-18 and Cu-64, and one of them has been evaluated in animal models. The results of this project will lead to major improvements in the use of nanoparticles in nuclear imaging and will significantly advance their potential for detecting low abundance biomarkers of medical importance.

Zhou, Dong

2012-12-13T23:59:59.000Z

385

TARGET STATION INFRASTRUCTURE THE CNGS EXPERIENCE  

E-Print Network [OSTI]

of Aluminum Water cooled Current: 150kA (horn) ­ 180 kA (reflector) Pulse duration 7ms #12;Key elements Remote handling Remote station for radiation survey in the target chamber #12;CNGS Target Area I per cooling circuit 2007 run radiation effects on ventilation system electronics broken flexible stripline

McDonald, Kirk

386

THE ROTATING TARGET FLOW TEST FACILITY  

E-Print Network [OSTI]

@idom.com) Fernando Sordo, ESS Bilbao Tom McManamy, ORNL/SNS #12;Status of the RTFT 4th HPTW of a RotaAng Target for ESS · In 2009 ESS Bilbao worked out a preliminary design for a rotaZng target for ESS. · Disc formed by un-clad tungsten bricks cooled

McDonald, Kirk

387

Target Options for a Neutrino Factory  

E-Print Network [OSTI]

shield WC 6. Target station engineering Target integration Remote maintenance Shielding 7. Beam dump 7a possible/preferable? · Can the beam size be increased (from 1.2 mm (rms) baseline)? #12;Heat loads ­ Heating and material damage Issues ­ Heat load from 4 MW pulsed proton beam · Total Heat load

McDonald, Kirk

388

Possible Target Options Michael A. Green  

E-Print Network [OSTI]

from low Z material. The target material should be ductile, with high thermal conductivity and should. These materials are strong and non- corrosive. The problem with niobium-titanium is its poor thermal conductivity, a desirable target material should have a medium to high Z. For low energy drivers the targe should be made

McDonald, Kirk

389

Environmental Management System (EMS) objectives&targets annual results summary : FY2012.  

SciTech Connect (OSTI)

Sandia National Laboratories/New Mexico's (SNL/NM) Environmental Management System is the integrated approach for members of the workforce to identify and manage environmental risks. Each Fiscal Year (FY) SNL/NM performs an analysis to identify environmental aspects, and the environmental programs associated with them are charged with the task of routinely monitoring and measuring the objectives and targets that are established to mitigate potential impacts of SNL/NM's operations on the environment. An annual summary of the results achieved towards meeting established objectives and targets provides a connection to, and rational for, annually revised environmental aspects. The purpose of this document is to summarize the results achieved and documented in FY2012.

Vetter, Douglas Walter

2013-02-01T23:59:59.000Z

390

Environmental Management System (EMS) objectives and targets : annual results summary - FY2011.  

SciTech Connect (OSTI)

Sandia National Laboratories/New Mexico's (SNL/NM) Environmental Management System is the integrated approach for members of the workforce to identify and manage environmental risks. Each Fiscal Year (FY) SNL/NM performs an analysis to identify environmental aspects, and the environmental programs associated with them are charged with the task of routinely monitoring and measuring the objectives and targets that are established to mitigate potential impacts of SNL/NM's operations on the environment. An annual summary of the results achieved towards meeting established objectives and targets provides a connection to, and rational for, annually revised environmental aspects. The purpose of this document is to summarize the results achieved and documented in FY2011.

Vetter, Douglas Walter

2012-02-01T23:59:59.000Z

391

Continuing investigations for technology assessment of /sup 99/Mo production from LEU (low enriched Uranium) targets  

SciTech Connect (OSTI)

Currently much of the world's supply of /sup 99m/Tc for medical purposes is produced from /sup 99/Mo derived from the fissioning of high enriched uranium (HEU). The need for /sup 99m/Tc is continuing to grow, especially in developing countries, where needs and national priorities call for internal production of /sup 99/Mo. This paper presents the results of our continuing studies on the effects of substituting low enriched Uranium (LEU) for HEU in targets for the production of fission product /sup 99/Mo. Improvements in the electrodeposition of thin films of uranium metal are reported. These improvements continue to increase the appeal for the substitution of LEU metal for HEU oxide films in cylindrical targets. The process is effective for targets fabricated from stainless steel or hastaloy. A cost estimate for setting up the necessary equipment to electrodeposit uranium metal on cylindrical targets is reported. Further investigations on the effect of LEU substitution on processing of these targets are also reported. Substitution of uranium silicides for the uranium-aluminum alloy or uranium aluminide dispersed fuel used in other current target designs will allow the substitution of LEU for HEU in these targets with equivalent /sup 99/Mo-yield per target and no change in target geometries. However, this substitution will require modifications in current processing steps due to (1) the insolubility of uranium silicides in alkaline solutions and (2) the presence of significant quantities of silicate in solution. Results to date suggest that both concerns can be handled and that substitution of LEU for HEU can be achieved.

Vandergrift, G.F.; Kwok, J.D.; Marshall, S.L.; Vissers, D.R.; Matos, J.E.

1987-01-01T23:59:59.000Z

392

Delayed neutrons measurement at the MEGAPIE target  

E-Print Network [OSTI]

In the framework of the Neutronic and Nuclear Assessment Task Group of the MEGAPIE experiment we measured the delayed neutron (DN) flux at the top of the target. The measurement was proposed mainly for radioprotection purposes since the DN flux at the top of the target has been estimated to be of the same order of magnitude as the prompt neutron flux. Given the strong model-dependence of DN predictions, the measurement of DN contribution to the total neutron activity at the top of the target was thus desired. Moreover, this measurement is complementary to the DN experiments performed at PNPI (Gatchina) on solid lead and bismuth targets. The DN measurement at MEGAPIE was performed during the start-up phase of the target. In this paper we present a detailed description of the experimental setup and some preliminary results on decay spectra.

Stefano Panebianco; Pavel Bokov; Diane Dore; Xavier Ledoux; Alain Letourneau; Aurelien Prevost; Danas Ridikas

2007-05-25T23:59:59.000Z

393

Delayed neutrons measurement at the MEGAPIE target  

E-Print Network [OSTI]

In the framework of the Neutronic and Nuclear Assessment Task Group of the MEGAPIE experiment we measured the delayed neutron (DN) flux at the top of the target. The measurement was proposed mainly for radioprotection purposes since the DN flux at the top of the target has been estimated to be of the same order of magnitude as the prompt neutron flux. Given the strong model-dependence of DN predictions, the measurement of DN contribution to the total neutron activity at the top of the target was thus desired. Moreover, this measurement is complementary to the DN experiments performed at PNPI (Gatchina) on solid lead and bismuth targets. The DN measurement at MEGAPIE was performed during the start-up phase of the target. In this paper we present a detailed description of the experimental setup and some preliminary results on decay spectra.

Panebianco, Stefano; Dore, Diane; Ledoux, Xavier; Letourneau, Alain; Prevost, Aurelien; Ridikas, Danas

2007-01-01T23:59:59.000Z

394

The Jefferson Lab Frozen Spin Target  

SciTech Connect (OSTI)

A frozen spin polarized target, constructed at Jefferson Lab for use inside a large acceptance spectrometer, is described. The target has been utilized for photoproduction measurements with polarized tagged photons of both longitudinal and circular polarization. Protons in TEMPO-doped butanol were dynamically polarized to approximately 90% outside the spectrometer at 5 T and 200-300 mK. Photoproduction data were acquired with the target inside the spectrometer at a frozen-spin temperature of approximately 30 mK with the polarization maintained by a thin, superconducting coil installed inside the target cryostat. A 0.56 T solenoid was used for longitudinal target polarization and a 0.50 T dipole for transverse polarization. Spin relaxation times as high as 4000 hours were observed. We also report polarization results for deuterated propanediol doped with the trityl radical OX063.

Christopher Keith, James Brock, Christopher Carlin, Sara Comer, David Kashy, Josephine McAndrew, David Meekins, Eugene Pasyuk, Joshua Pierce, Mikell Seely

2012-08-01T23:59:59.000Z

395

Cooperative target convergence using multiple agents  

SciTech Connect (OSTI)

This work considers the problem of causing multiple (100`s) autonomous mobile robots to converge to a target and provides a follow-the-leader approach to the problem. Each robot has only a limited-range sensor for sending the target and also larger but also limited-range robot-to-robot communication capability. Because of the small amount of information available to the robots, a practical approach to improve convergence to the target is to have a robot follow the robot with the best quality of information. Specifically, each robot emits a signal that informs in-range robots what its status is. A robot has a status value of 0 if it is itself in range of the target. A robot has a status of 1 if it is not in range of the target but is in communication range of a robot that is in range of the target. A robot has a status of 2 if it is not in range of the target but is within range of another robot that has status 1, and so on. Of all the mobile robots that any given robot is in range of, it follows the one with the best status. The emergent behavior is the ant-like trails of robots following each other toward the target. If the robot is not in range of another robot that is either in range of the target or following another robot, the robot will assign-1 to its quality-of-information, and will execute an exhaustive search. The exhaustive search will continue until it encounters either the target or another robot with a nonnegative quality-of-information. The quality of information approach was extended to the case where each robot only has two-bit signals informing it of distance to in-range robots.

Kwok, K.S.; Driessen, B.J.

1997-10-01T23:59:59.000Z

396

Vehicles and E85 Stations Needed to Achieve Ethanol Goals  

SciTech Connect (OSTI)

This paper presents an analysis of the numbers of stations and vehicles necessary to achieve future goals for sales of ethanol fuel (E85). The paper does not analyze issues related to the supply of ethanol which may turn out to be of even greater concern. A model of consumers decisions to purchase E85 versus gasoline based on prices, availability, and refueling frequency is derived and preliminary results for 2010, 2017 and 2030 consistent with the President s 2007 biofuels program goals are presented (1). A limited sensitivity analysis is carried out to indicate key uncertainties in the trade-off between the number of stations and fuels. The analysis indicates that to meet a 2017 goal of 26 billion gallons of E85 sold, on the order of 30% to 80% of all stations may need to offer E85, and that 125 to 200 million flexible fuel vehicles (FFVs) may need to be on the road, even if oil prices remain high. These conclusions are tentative for three reasons: (1) there is considerable uncertainty about key parameter values, such as the price elasticity of choice between E85 and gasoline, (2) the future prices of E85 and gasoline are uncertain; and (3) the method of analysis used is highly aggregated; it does not consider the potential benefits of regional strategies nor the possible existence of market segments predisposed to purchase E85. Nonetheless, the preliminary results indicate that the 2017 biofuels program goals are ambitious and will require a massive effort to produce FFVs and insure widespread availability of E85.

Greene, David L [ORNL

2008-01-01T23:59:59.000Z

397

Validation of Geant4 Hadronic Generators versus Thin Target Data  

SciTech Connect (OSTI)

The GEANT4 toolkit is widely used for simulation of high energy physics (HEP) experiments, in particular, those at the Large Hadron Collider (LHC). The requirements of robustness, stability and quality of simulation for the LHC are demanding. This requires an accurate description of hadronic interactions for a wide range of targets over a large energy range, from stopped particle reactions to low energy nuclear interactions to interactions at the TeV energy scale. This is achieved within the Geant4 toolkit by combining a number of models, each of which are valid within a certain energy domain. Comparison of these models to thin target data over a large energy range indicates the strengths and weaknesses of the model descriptions and the energy range over which each model is valid. Software has been developed to handle the large number of validation tests required to provide the feedback needed to improve the models. An automated process for carrying out the validation and storing/displaying the results is being developed and will be discussed.

Banerjee, S.; /Fermilab; Folger, G.; /CERN; Ivanchenko, A.; /CERN /CENBG, Gradignan; Ivanchenko, V.N.; /CERN /NeurOK, Moscow /Metz U.; Kossov, M.; /CERN; Quesada, J.M.; /Seville U.; Schalicke, A.; /DESY, Zeuthen; Uzhinsky, V.; /CERN; Wenzel, H.; /Fermilab; Wright, D.H.; /SLAC; Yarba, J.; /Fermilab

2012-04-19T23:59:59.000Z

398

Micro-fabrication Techniques for Target Components  

SciTech Connect (OSTI)

Micro-fabrication techniques, derived from the semi-conductor industry, can be used to make a variety of useful mechanical components for targets. A selection of these components including supporting cooling arms for prototype cryogenic inertial confinement fusion targets, stepped and graded density targets for materials dynamics experiments are described. Micro-fabrication enables cost-effective, simultaneous fabrication of multiple high-precision components with complex geometries. Micro-fabrication techniques such as thin-film deposition, photo-lithographic patterning and etch processes normally used in the semi-conductor manufacture industry, can be exploited to make useful mechanical target components. Micro-fabrication processes have in recent years been used to create a number of micro-electro-mechanical systems (MEMS) components such as pressure sensors, accelerometers, ink jet printer heads, microfluidics platforms and the like. These techniques consist primarily of deposition of thin films of material, photo-lithographic patterning and etching processes performed sequentially to produce three dimensional structures using essentially planar processes. While the planar technology can be limiting in terms of the possible geometries of the final product, advantages of using these techniques include the ability to make multiple complex structures simultaneously and cost-effectively. Target components fabricated using these techniques include the supporting cooling arms for cryogenic prototype fusion ignition targets, stepped targets for equation-of-state experiments, and graded density reservoirs for material strength experiments.

Miles, R; Hamilton, J; Crawford, J; Ratti, S; Trevino, J; Graff, T; Stockton, C; Harvey, C

2008-06-10T23:59:59.000Z

399

Self-assessing target with automatic feedback  

DOE Patents [OSTI]

A self assessing target with four quadrants and a method of use thereof. Each quadrant containing possible causes for why shots are going into that particular quadrant rather than the center mass of the target. Each possible cause is followed by a solution intended to help the marksman correct the problem causing the marksman to shoot in that particular area. In addition, the self assessing target contains possible causes for general shooting errors and solutions to the causes of the general shooting error. The automatic feedback with instant suggestions and corrections enables the shooter to improve their marksmanship.

Larkin, Stephen W.; Kramer, Robert L.

2004-03-02T23:59:59.000Z

400

ESO Imaging Survey: Finding Targets for VLT  

E-Print Network [OSTI]

Data from the wide-angle, moderately deep ESO Imaging Survey have been used to produce target lists for the first year of the VLT. About 250 candidate clusters of galaxies have been identified from the I-band images covering $\\sim$ 17 square degrees. In addition, using the multicolor data available over an area of 1.3 square degrees over 300 potentially interesting point-sources have been selected. The color-selected targets include low-mass stars/brown dwarfs, white-dwarfs and quasars. Images, object catalogs and derived target lists are available from the world-wide web (http://www.eso.org/eis)

L. N. da Costa

1998-09-16T23:59:59.000Z

Note: This page contains sample records for the topic "achieving eu targets" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

JOURNAL DE PHYSIQUE Colloque C5, supplement aun 5, Tome 40, Mai 1979, page C5-393 Effects of carbon on the magnetism of EuB6  

E-Print Network [OSTI]

of carbon on the magnetism of EuB6 M. Kasaya (*), J. M. Tarascon, J. Etourneau and P. Hagenmuller antiferromagnétique. Pour des compositions intermédiaires, ils sont mictomagnétiques. Abstract. -- Magnetization has been measured as function of temperature and magnetic field for compounds of composition EuB6_xCx (0

Boyer, Edmond

402

Webinar: Targeted Algal Biofuels and Bioproducts FOA  

Broader source: Energy.gov [DOE]

The Energy Department’s Bioenergy Technologies Office will present a live informational webcast on the Targeted Algal Biomass and Bioproducts Funding Opportunity (DE-FOA-0001162) on October 8, 2014...

403

Beam Pulse Structure and Targets Roger Bennett  

E-Print Network [OSTI]

in a target. The shock wave travels through matter at the speed of sound, where E is Young's modulus of elasticity and is the density. E s = #12;The time taken for the wave to travel from the outer surface

McDonald, Kirk

404

EMC effect: asymptotic freedom with nuclear targets  

SciTech Connect (OSTI)

General features of the EMC effect are discussed within the framework of quantum chromodynamics as expressed via the operator product expansion and asymptotic freedom. These techniques are reviewed with emphasis on the target dependence. 22 references.

West, G.B.

1984-01-01T23:59:59.000Z

405

Statistical Modeling of Single Target Cell Encapsulation  

E-Print Network [OSTI]

High throughput drop-on-demand systems for separation and encapsulation of individual target cells from heterogeneous mixtures of multiple cell types is an emerging method in biotechnology that has broad applications in ...

Moon, SangJun

406

Nanotechnology-mediated targeting of tumor angiogenesis  

E-Print Network [OSTI]

Abstract Angiogenesis is disregulated in many diseased states, most notably in cancer. An emerging strategy for the development of therapies targeting tumor-associated angiogenesis is to harness the potential of nanotechnology ...

Banerjee, Deboshri

407

Computing the apparent centroid of radar targets  

SciTech Connect (OSTI)

A high-frequency multibounce radar scattering code was used as a simulation platform for demonstrating an algorithm to compute the ARC of specific radar targets. To illustrate this simulation process, several targets models were used. Simulation results for a sphere model were used to determine the errors of approximation associated with the simulation; verifying the process. The severity of glint induced tracking errors was also illustrated using a model of an F-15 aircraft. It was shown, in a deterministic manner, that the ARC of a target can fall well outside its physical extent. Finally, the apparent radar centroid simulation based on a ray casting procedure is well suited for use on most massively parallel computing platforms and could lead to the development of a near real-time radar tracking simulation for applications such as endgame fuzing, survivability, and vulnerability analyses using specific radar targets and fuze algorithms.

Lee, C.E.

1996-12-31T23:59:59.000Z

408

Analysis of Climate Policy Targets under Uncertainty  

E-Print Network [OSTI]

Although policymaking in response to the climate change is essentially a challenge of risk management, most studies of the relation of emissions targets to desired climate outcomes are either deterministic or subject to a ...

Jacoby, Henry D.

409

Targeting cancer metabolism: a therapeutic window opens  

E-Print Network [OSTI]

Genetic events in cancer activate signalling pathways that alter cell metabolism. Clinical evidence has linked cell metabolism with cancer outcomes. Together, these observations have raised interest in targeting metabolic ...

Vander Heiden, Matthew G.

410

SNS Target R&D Presented by  

E-Print Network [OSTI]

since been resolved ­ QA program would have to be very stringent for long lifetime Second target station implemented #12;11 Managed by UT-Battelle for the U.S. Department of Energy Spallation Neutron Source

McDonald, Kirk

411

Implicit and Self-Attributed Achievement Goals: Relationships with Effort and Persistence  

E-Print Network [OSTI]

This dissertation investigates the existence of implicit, or non-conscious, achievement goals and their relationships with self-attributed achievement goals and two aspects of task performance: effort and persistence. One ...

Beauchamp, Anne

2011-02-05T23:59:59.000Z

412

E-Print Network 3.0 - achieve reliable information Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

search results for: achieve reliable information Page: << < 1 2 3 4 5 > >> 1 On the Reliability of Backbone-Assisted End-to-End Transmissions in WSNs Summary: , to achieve higher...

413

FUJIFILM Hunt Chemicals U.S.A. Achieves Compressed Air System...  

Broader source: Energy.gov (indexed) [DOE]

FUJIFILM Hunt Chemicals U.S.A. Achieves Compressed Air System Energy-Reduction Goals with a Three-Phased Strategy FUJIFILM Hunt Chemicals U.S.A. Achieves Compressed Air System...

414

First-ever ieRoadmap Workshop Reviews Progress in Achieving Roadmap...  

Broader source: Energy.gov (indexed) [DOE]

First-ever ieRoadmap Workshop Reviews Progress in Achieving Roadmap Goals First-ever ieRoadmap Workshop Reviews Progress in Achieving Roadmap Goals On May 28-29, 2008, the first...

415

Policy Flash 2014-39 Initiatives to Achieve Strategic Plan 2014...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

to Achieve Strategic Plan 2014-2018 Performance Goal Focused on Cost Savings Policy Flash 2014-39 Initiatives to Achieve Strategic Plan 2014-2018 Performance Goal Focused...

416

Synthesis and properties of ZnTe and Eu{sup 3+} ion co-doped glass nanocomposites  

SciTech Connect (OSTI)

In this study, ZnTe (II-VI) semiconductor and Eu{sup +3}-ion co-doped borosilicate glass has been prepared in the SiO{sub 2}-K{sub 2}O-CaO-BaO-B{sub 2}O{sub 3} glass system followed by controlled heat-treatment to produce glass nanocomposites. Glass transition temperature and crystallization peak temperature have been evaluated using DSC analysis. Dilatometric studies were carried out to evaluate thermal expansion co-efficient, glass transition temperature, and dilatometric softening temperature and found to be 10.7 × 10{sup ?6}/K, 580°?C and 628°?C, respectively. TEM micrographs demonstrate formation of nano sized crystallites of less than 50?nm. The ZnTe crystal formation also established through selected area electron diffraction (SAED) analysis and high resolution images obtained through TEM studies. With increasing heat treatment time, optical transmission cut-off wavelength (?{sub cut-off}) shifted towards higher wavelength. Excitation spectra were recorded by monitoring emission at 613?nm corresponding to the {sup 5}D{sub 0} ? {sup 7}F{sub 2} transition. An intense 394?nm excitation band corresponding to the {sup 7}F{sub 0} ? {sup 5}L{sub 6} transition was observed. Emission spectra were then recorded by exciting the glass samples at 394?nm. When the glass is heat-treated for 30 min at 610°?C, a 6-fold increase in the intensity of the red emission at 612?nm has been observed, which is attributed to the segregation of Eu{sup 3+} ions into the low phonon energy ZnTe crystallites and as the size of the nanocrystals is smaller than the size of the exciton, quantum confinement effect is visible. Further increase in heat-treatment duration led to decrease in luminescence intensity due to the growth of larger size crystals. {sup 5}D{sub 1} ? {sup 7}F{sub 0} transition is visible only in the samples heat-treated for 30 min and 1 h, which is a characteristic of presence of Eu{sup 3+} ions in the low phonon energy ZnTe crystal sites. The micro hardness of the precursor glass and glass nanocomposites was evaluated; base glass shows hardness of 6.7 GPa and hardness of heat-treated glass nanocomposites has been found to decrease with increase in heat-treatment duration (5.5-5.3 GPa). However, mechanical properties are found to be suitable for device applications.

Rahaman Molla, Atiar; Tarafder, Anal; Dey, Chirantan; Karmakar, Basudeb, E-mail: basudebk@cgcri.res.in [Glass Science and Technology Section, Glass Division, CSIR-Central Glass and Ceramic Research Institute, 196 Raja S. C. Mullick Road, Kolkata 700032 (India)

2014-10-28T23:59:59.000Z

417

Achieving California’s Land Use and Transportation Greenhouse Gas Emission Targets Under AB 32: An Exploration of Potential Policy Processes and Mechanisms  

E-Print Network [OSTI]

South Access to the Golden Gate Bridge: Toll Feasibilitybe collected at the Golden Gate Bridge using the existingtotal toll cost on the Golden Gate Bridge at $7.00 for cash

Shaheen, Susan A.; Bejamin-Chung, Jade; Allen, Denise; Howe-Steiger, Linda

2009-01-01T23:59:59.000Z

418

Achieving California’s Land Use and Transportation Greenhouse Gas Emission Targets Under AB 32: An Exploration of Potential Policy Processes and Mechanisms  

E-Print Network [OSTI]

the national level regarding global warming mitigation. Thethe national level regarding global warming mitigation. Thisincreasing sea levels due to global warming (McManus, 2007).

Shaheen, Susan A.; Bejamin-Chung, Jade; Allen, Denise; Howe-Steiger, Linda

2009-01-01T23:59:59.000Z

419

Achieving California’s Land Use and Transportation Greenhouse Gas Emission Targets Under AB 32: An Exploration of Potential Policy Processes and Mechanisms  

E-Print Network [OSTI]

laws? i. Should economic incentives (e.g. , rewarding citieschallenges of economic incentives, regulatory reforms, anddo you believe economic incentives, regulatory reforms, or

Shaheen, Susan A.; Bejamin-Chung, Jade; Allen, Denise; Howe-Steiger, Linda

2009-01-01T23:59:59.000Z

420

Achieving California’s Land Use and Transportation Greenhouse Gas Emission Targets Under AB 32: An Exploration of Potential Policy Processes and Mechanisms  

E-Print Network [OSTI]

policy at the US state level to decrease GHG emissions?ABU.S. has failed to adopt GHG reduction policies at the national levelU.S. has failed to adopt GHG reduction policies at the national level

Shaheen, Susan A.; Bejamin-Chung, Jade; Allen, Denise; Howe-Steiger, Linda

2009-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "achieving eu targets" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Achieving California’s Land Use and Transportation Greenhouse Gas Emission Targets Under AB 32: An Exploration of Potential Policy Processes and Mechanisms  

E-Print Network [OSTI]

want to reduce their ‘carbon footprint,’ not by law, but todecreases of its carbon footprint could reduce emissions byTo decrease the carbon footprint of transportation, the

Shaheen, Susan A.; Bejamin-Chung, Jade; Allen, Denise; Howe-Steiger, Linda

2009-01-01T23:59:59.000Z

422

Achieving California’s Land Use and Transportation Greenhouse Gas Emission Targets Under AB 32: An Exploration of Potential Policy Processes and Mechanisms  

E-Print Network [OSTI]

Energy Commission Caltrans, District 3 City of Lincoln City of Sacramento City of West Sacramento Institute for Local Governments Sacramento Area

Shaheen, Susan A.; Bejamin-Chung, Jade; Allen, Denise; Howe-Steiger, Linda

2009-01-01T23:59:59.000Z

423

Achieving California’s Land Use and Transportation Greenhouse Gas Emission Targets Under AB 32: An Exploration of Potential Policy Processes and Mechanisms  

E-Print Network [OSTI]

that may slow the process of sustainable development. Inpotentially slow the process of sustainable development.

Shaheen, Susan A.; Bejamin-Chung, Jade; Allen, Denise; Howe-Steiger, Linda

2009-01-01T23:59:59.000Z

424

Achieving California’s Land Use and Transportation Greenhouse Gas Emission Targets Under AB 32: An Exploration of Potential Policy Processes and Mechanisms  

E-Print Network [OSTI]

For instance, fossil fuel energy subsidies, which cost theAct of 1975 ? Fossil fuel energy subsidies in the U.S. ?

Shaheen, Susan A.; Bejamin-Chung, Jade; Allen, Denise; Howe-Steiger, Linda

2009-01-01T23:59:59.000Z

425

Achieving California’s Land Use and Transportation Greenhouse Gas Emission Targets Under AB 32: An Exploration of Potential Policy Processes and Mechanisms  

E-Print Network [OSTI]

ND) Standards The U.S. Green Building Council’s Leadershipnew urbanism, and green building. Developments that meeti.e. , energy savings in green buildings, transportation

Shaheen, Susan A.; Bejamin-Chung, Jade; Allen, Denise; Howe-Steiger, Linda

2009-01-01T23:59:59.000Z

426

BRIEF REPORT Young Children Help Others to Achieve Their Social Goals  

E-Print Network [OSTI]

BRIEF REPORT Young Children Help Others to Achieve Their Social Goals Jonathan S. Beier University research has documented young children's propensity to help others achieve their unfulfilled goals toward. Here we demonstrate that children are also inclined, and able, to help others achieve their social

Carpenter, M.alinda

427

VEHICLE NETWORKS: ACHIEVING REGULAR FORMATION Sonja Glavaski1, Madalena Chaves2, Robert Day3,  

E-Print Network [OSTI]

VEHICLE NETWORKS: ACHIEVING REGULAR FORMATION Sonja Glavaski1, Madalena Chaves2, Robert Day3 will consider a network of vehicles ex- changing information among themselves with the intention of achieving, allowing for the randomly breaking of the communi- cation links among the vehicles. The network achieves

Chaves, Madalena

428

Creation of mixed beam from alloy target and couple of pure targets with laser  

SciTech Connect (OSTI)

To create mixed species ion beam with laser pulses, we investigated charge state distributions of plasma formed from both Al-Fe alloy targets and pure Al and Fe targets placed close together. With two targets, we observed that the two kinds of atoms were mixed when the interval of two laser pulses was large enough (40 ?s). On the other hand, when the interval was 0.0 ?s, we observed fewer Fe ions and they did not mix well with the Al ions. The two species were mixed well in the plasma from the alloy target. Furthermore, we observed that specific charge states of Fe ions increased. From the results, it was determined that we can use two pure targets to mix two species whose difference of the drift velocity is large. On the other hand, we must use an alloy target when the drift velocities of the species are close.

Ikeda, Shunsuke, E-mail: shunsuke.ikeda@riken.jp; Sekine, Megumi [Tokyo Institute of Technology, Yokohama, Kanagawa (Japan) [Tokyo Institute of Technology, Yokohama, Kanagawa (Japan); Riken, Wako, Saitama (Japan); Romanelli, Mark [Cornell University, Ithaca, New York 14850 (United States)] [Cornell University, Ithaca, New York 14850 (United States); Cinquegrani, David [University of Michigan, Ann Arbor, Michigan 48109 (United States)] [University of Michigan, Ann Arbor, Michigan 48109 (United States); Kumaki, Masafumi [Waseda University, Shinjuku, Tokyo (Japan)] [Waseda University, Shinjuku, Tokyo (Japan); Fuwa, Yasuhiro [Kyoto University, Uji, Kyoto (Japan)] [Kyoto University, Uji, Kyoto (Japan); Munemoto, Naoya; Horioka, Kazuhiko [Tokyo Institute of Technology, Yokohama, Kanagawa (Japan)] [Tokyo Institute of Technology, Yokohama, Kanagawa (Japan); Kanesue, Takeshi; Okamura, Masahiro [Brookhaven National Laboratory, Upton, New York 11973 (United States)] [Brookhaven National Laboratory, Upton, New York 11973 (United States); Jin, Qianyu [Institute of Modern Physics, Lanzhou, Gansu (China)] [Institute of Modern Physics, Lanzhou, Gansu (China)

2014-02-15T23:59:59.000Z

429

EU, U.S., Russia, Asian States Sign Nuclear-Fusion Reactor May 24 (Bloomberg) --The European Union, the U.S., Russia and Asian nations  

E-Print Network [OSTI]

Europe EU, U.S., Russia, Asian States Sign Nuclear-Fusion Reactor Pact May 24 (Bloomberg) -- The European Union, the U.S., Russia and Asian nations including China signed a treaty to build the first percent, China, India, South Korea and Russia 10 percent each and France 8 percent, #12;according

430

The European Forest Institute and the Finnish Forest Research Institute: The supply of woody biomass from the forests in the EU can be  

E-Print Network [OSTI]

Karelia in Eastern Finland showed that if the paying ability of a user of logging residues reduces 4, Finnish Forest Research Institute, tel. +358 50 391 3088, perttu.anttila @ metla.fi Final reports: http://ec.europa.eu/energy/renewables/studies/bioenergy

431

Fiscal Year 2008 Phased Construction Completion Report for EU Z2-33 in Zone 2, East Tennessee Technology Park, Oak Ridge, Tennessee  

SciTech Connect (OSTI)

The Record of Decision for Soil, Buried Waste, and Subsurface Structure Actions in Zone 2, East Tennessee Technology Park, Oak Ridge, Tennessee (DOE/OR/01-2161&D2) (Zone 2 ROD) acknowledged that most of the 800 acres in Zone 2 were contaminated, but that sufficient data to confirm the levels of contamination were lacking. The Zone 2 ROD further specified that a sampling strategy for filling the data gaps would be developed. The Remedial Design Report/Remedial Action Work Plan for Zone 2 Soils, Slabs, and Subsurface Structures, East Tennessee Technology Park, Oak Ridge, Tennessee (DOE/OR/01-2224&D3) (Zone 2 RDR/RAWP) defined the sampling strategy as the Dynamic Verification Strategy (DVS), generally following the approach used for characterization of the Zone 1 exposure units (EUs). The Zone 2 ROD divided the Zone 2 area into seven geographic areas and 44 EUs. To facilitate the data quality objectives (DQOs) of the DVS process, the Zone 2 RDR/RAWP regrouped the 44 EUs into 12 DQO scoping EU groups. These groups facilitated the DQO process by placing similar facilities and their support facilities together and allowing identification of data gaps. The EU groups were no longer pertinent after DQO planning was completed and characterization was conducted as areas became accessible. As the opportunity to complete characterization became available, the planned DVS program and remedial actions (RAs) were completed for EU Z2-33. Remedial action was also performed at two additional areas in adjacent EU Z2-42 because of their close proximity and similar nature to a small surface soil RA in EU Z2-33. Remedial actions for building slabs performed in EU Z2-33 during fiscal year (FY) 2007 were reported in the Fiscal Year 2007 Phased Construction Completion Report for the Zone 2 Soils, Slabs, and Subsurface Structures at East Tennessee Technology Park, Oak Ridge, Tennessee (DOE/OR/01-2723&D1). Recommended RAs for EU Z2-42 were described in the Fiscal Year 2006 Phased Construction Completion Report for the Zone 2 Soils, Slabs, and Subsurface Structures at East Tennessee Technology Park, Oak Ridge, Tennessee (DOE/OR/01-2317&D2). Remedial actions performed in the Balance of Site (BOS) Laboratory Area of EU Z2-33 and two small areas in EU Z2-42 are described in Sects. 5 through 10 of this Phased Construction Completion Report (PCCR). The purpose of this PCCR is to address the following: (1) Document DVS characterization results for EU Z2-33; (2) Describe and document the risk evaluation and determine if the EU meets the Zone 2 ROD requirements for unrestricted industrial use to 10 ft bgs; (3) Identify additional areas not defined in the Zone 2 ROD that require remediation based on the DVS evaluation results; and (4) Describe RAs performed in the EU Z2-33 BOS Laboratory Area and two small areas in EU Z2-42. Approximately 18 acres in EU Z2-33 are addressed in this PCCR. Based on the results of the DVS evaluation and RAs performed, all 18 acres are recommended for unrestricted industrial use to 10 ft bgs. Three Federal Facility Agreement sites are addressed and recommended for no further action within this acreage, including: (1) K-1004-L Recirculating Cooling Water Lines Leak Sites; (2) K-1044 Heavy Equipment Repair Shop; and (3) K-1015-A Laundry Pit. Remedial actions for EU Z2-33 were developed in response to DVS characterization results described in the EU Z2-33 Technical Memorandum (Appendix A) and to support reindustrialization of the East Tennessee Technology Park as a commercial industrial park. Remediation criteria were designed for the protection of a future industrial worker who normally would not have the potential for exposure to soil below 10ft bgs. Accordingly, the Zone 2 ROD required land use controls to prevent disturbance of soils below 10 ft deep and to restrict future land use to industrial/commercial activities. In response to stakeholder comments, the U.S. Department of Energy agreed to re-evaluate the need for such land use restrictions. This document includes a screening evaluation to determine the likel

Bechtel Jacobs

2008-09-11T23:59:59.000Z

432

Outline of a proposal responding to E.U. and U.S. calls for trustworthy globalscale IdM and CKM designs  

E-Print Network [OSTI]

on Cyber Security and Information Intelligence Research (April 21­23, 2010) c # ACM, 2010. 1. INTRODUCTION distribution nodes (aka key distri­ bution centers) [10] that was secure against a collusion of up to m­1@pqs.io ABSTRACT In 2007, the E.U. FP6 SecurIST called [31] for trustworthy international identity management (Id

433

Outline of a proposal responding to E.U. and U.S. calls for trustworthy global-scale IdM and CKM designs  

E-Print Network [OSTI]

on Cyber Security and Information Intelligence Research (April 21-23, 2010) c ACM, 2010. 1. INTRODUCTION distribution nodes (aka key distri- bution centers) [10] that was secure against a collusion of up to m-1@pqs.io ABSTRACT In 2007, the E.U. FP6 SecurIST called [31] for trustworthy international identity management (Id

434

EU, Japan call for dialogue amid row on breakthrough nuclear project The European Union and Japan each called Wednesday for dialogue among the six partners on  

E-Print Network [OSTI]

if Japan did not host ITER. Japan has also said it is ready to discuss compromises. Nuclear Power Plant Discount new & used items. affil Search for nuclear power plant now! American Nuclear Society Nuclear Power Plant Wall Maps published by Nuclear News Ads by Goooooogle 12/1/04 10:30 AMEUbusiness - EU, Japan call

435

Photodegradation of luminescence in organic-ligand-capped Eu{sup 3+}:LaF{sub 3} nano-particles  

SciTech Connect (OSTI)

The luminescence from europium doped lanthanum trifluoride (Eu{sup 3+}:LaF{sub 3}) nano-crystals can be greatly enhanced by capping with ?-diketonate organic ligands. Here, we report on photo-stability measurements for the case of nano-crystals capped with thenoyltrifluroacetone (TTA) and compared with those capped with an inactive ligand, oleic acid. With exposure to UV pump light, we observed significant decrease in fluorescence and change in emission spectrum of the TTA-capped nano-particles whilst the fluorescence lifetime remained approximately constant. After a dose of order 70?kJ?cm{sup ?2}, the luminescence level was similar to that of oleic acid capped nano-crystals. We discuss possible mechanisms.

King, Gavin G. G.; Taylor, Luke R.; Longdell, Jevon J., E-mail: jevon.longdell@otago.ac.nz [Department of Physics, University of Otago, P.O. Box 56, Dunedin 9054 (New Zealand); Clarke, David J.; Quilty, J. W. [Callaghan Innovation Research Limited, P.O. Box 31-310, Lower Hutt 5040 (New Zealand)

2014-01-28T23:59:59.000Z

436

Production yields of noble-gas isotopes from ISOLDE UC$_{x}$/graphite targets  

E-Print Network [OSTI]

Yields of He, Ne, Ar, Kr and Xe isotopic chains were measured from UC$_{x}$/graphite and ThC$_{x}$/graphite targets at the PSB-ISOLDE facility at CERN using isobaric selectivity achieved by the combination of a plasma-discharge ion source with a water-cooled transfer line. %The measured half-lives allowed %to calculate the decay losses of neutron-rich isotopes in the %target and ion-source system, and thus to obtain information on the in-target %productions from the measured yields. The delay times measured for a UC$_x$/graphite target allow for an extrapolation to the expected yields of very neutron-rich noble gas isotopes, in particular for the ``NuPECC reference elements'' Ar and Kr, at the next-generation radioactive ion-beam facility EURISOL. \\end{abstract} \\begin{keyword} % keywords here, in the form: keyword \\sep keyword radioactive ion beams \\sep release \\sep ion yields \\sep ISOL (Isotope Separation On-Line) \\sep uranium and thorium carbide targets. % PACS codes here, in the form: \\PACS code \\sep code...

Bergmann, U C; Catherall, R; Cederkäll, J; Diget, C A; Fraile-Prieto, L M; Franchoo, S; Fynbo, H O U; Gausemel, H; Georg, U; Giles, T; Hagebø, E; Jeppesen, H B; Jonsson, O C; Köster, U; Lettry, Jacques; Nilsson, T; Peräjärvi, K; Ravn, H L; Riisager, K; Weissman, L; Äystö, J

2003-01-01T23:59:59.000Z

437

The CNGS Target Station Presented by L.Bruno  

E-Print Network [OSTI]

sealed system filled with 0.5 bar of He. The tube has annular fins to enhance convective heat transfer enclosure Inlet target Inlet fixed shielding Outlet Beam #12;The target Assembly The CNGS Target Station as

McDonald, Kirk

438

Barrelane-like germanium clusters in Eu{sub 3}Ge{sub 5}: Crystal structure, chemical bonding and physical properties  

SciTech Connect (OSTI)

Formation and crystal structure of the binary germanide Eu{sub 3}Ge{sub 5} were investigated in detail. The compound forms peritectically at 1008deg. C and does not undergo any phase transition down to room temperature. The crystal structure was determined first from X-ray powder diffraction data and was later confirmed by single-crystal X-ray diffraction: structure type Pu{sub 3}Pd{sub 5}, space group Cmcm (no. 63), a=9.7675(4)A, b=7.9681(3)A, c=9.8562(3)A. The main building blocks are Ge{sub 5}{sup 6-} cluster anions surrounded by Eu{sup 2+} cations. The nearly tetragonal-pyramidal shape is suggested by the interatomic distances. Contrary to that, the bonding analysis with the electron localization function (ELF) reveals only two- and three-bonded germanium atoms forming a strongly distorted [1.1.1]-barrelane-like cluster. Despite the formal electron deficiency, compared to the barrelane C{sub 5}H{sub 8}, the electron counting in the cluster anion and its conformation cannot be interpreted applying the Wade's rules. In accordance with the calculated electronic density of states, Eu{sub 3}Ge{sub 5} shows a metal-like temperature dependence of the electrical resistivity with a sharp change of {rho}(T) slope at the Neel point. Above the Neel point the inverse magnetic susceptibility reveals Curie-Weiss behavior with an effective moment of 8.11{mu}{sub B} (Eu{sup 2+}, 4f{sup 7} configuration) in agreement with the analysis of the chemical bonding. The 4f{sup 7} electronic configuration of europium is confirmed by Eu-L{sub III} X-ray absorption spectroscopy.

Budnyk, Sergij [Max-Planck-Institut fuer Chemische Physik fester Stoffe, Noethnitzer Str. 40, 01187 Dresden (Germany); Weitzer, Franz [AG Neue Materialien, Universitaet Wien, Waehringerstr. 42, 1090 Vienna (Austria); Kubata, Christof [Laboratorium fuer Anorganische Chemie, ETH Hoenggerberg, HCI, 8093 Zurich (Switzerland); Collegium Helveticum, 3092 Zuerich (Switzerland); Prots, Yurii [Max-Planck-Institut fuer Chemische Physik fester Stoffe, Noethnitzer Str. 40, 01187 Dresden (Germany); Akselrud, Lev G. [Institut of Inorganic Chemistry, University of Lviv, Kyrylo and Methody Str. 6, 79005 Lviv (Ukraine); Schnelle, Walter [Max-Planck-Institut fuer Chemische Physik fester Stoffe, Noethnitzer Str. 40, 01187 Dresden (Germany); Hiebl, Kurt [AG Neue Materialien, Universitaet Wien, Waehringerstr. 42, 1090 Vienna (Austria); Nesper, Reinhard [Laboratorium fuer Anorganische Chemie, ETH Hoenggerberg, HCI, 8093 Zurich (Switzerland); Collegium Helveticum, 3092 Zurich (Switzerland); Wagner, Frank R. [Max-Planck-Institut fuer Chemische Physik fester Stoffe, Noethnitzer Str. 40, 01187 Dresden (Germany); Grin, Yuri [Max-Planck-Institut fuer Chemische Physik fester Stoffe, Noethnitzer Str. 40, 01187 Dresden (Germany)]. E-mail: grin@cpfs.mpg.de

2006-08-15T23:59:59.000Z

439

Final report on the Magnetized Target Fusion Collaboration  

SciTech Connect (OSTI)

Nuclear fusion has the potential to satisfy the prodigious power that the world will demand in the future, but it has yet to be harnessed as a practical energy source. The entry of fusion as a viable, competitive source of power has been stymied by the challenge of finding an economical way to provide for the confinement and heating of the plasma fuel. It is the contention here that a simpler path to fusion can be achieved by creating fusion conditions in a different regime at small scale (~ a few cm). One such program now under study, referred to as Magnetized Target Fusion (MTF), is directed at obtaining fusion in this high energy density regime by rapidly compressing a compact toroidal plasmoid commonly referred to as a Field Reversed Configuration (FRC). To make fusion practical at this smaller scale, an efficient method for compressing the FRC to fusion gain conditions is required. In one variant of MTF a conducting metal shell is imploded electrically. This radially compresses and heats the FRC plasmoid to fusion conditions. The closed magnetic field in the target plasmoid suppresses the thermal transport to the confining shell, thus lowering the imploding power needed to compress the target. The undertaking to be described in this proposal is to provide a suitable target FRC, as well as a simple and robust method for inserting and stopping the FRC within the imploding liner. The timescale for testing and development can be rapidly accelerated by taking advantage of a new facility funded by the Department of Energy. At this facility, two inductive plasma accelerators (IPA) were constructed and tested. Recent experiments with these IPAs have demonstrated the ability to rapidly form, accelerate and merge two hypervelocity FRCs into a compression chamber. The resultant FRC that was formed was hot (T&ion ~ 400 eV), stationary, and stable with a configuration lifetime several times that necessary for the MTF liner experiments. The accelerator length was less than 1 meter, and the time from the initiation of formation to the establishment of the final equilibrium was less than 10 microseconds. With some modification, each accelerator was made capable of producing FRCs suitable for the production of the target plasma for the MTF liner experiment. Based on the initial FRC merging/compression results, the design and methodology for an experimental realization of the target plasma for the MTF liner experiment can now be defined. A high density FRC plasmoid is to be formed and accelerated out of each IPA into a merging/compression chamber similar to the imploding liner at AFRL. The properties of the resultant FRC plasma (size, temperature, density, flux, lifetime) are obtained in the reevant regime of interest. The process still needs to be optimized, and a final design for implementation at AFRL must now be carried out. When implemented at AFRL it is anticipated that the colliding/merging FRCs will then be compressed by the liner. In this manner it is hoped that ultimately a plasma with ion temperatures reaching the 10 keV range and fusion gain near unity can be obtained.

John Slough

2009-09-08T23:59:59.000Z

440

Structural genomics of infectious disease drug targets: the SSGCID...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

of infectious disease drug targets: the SSGCID. Structural genomics of infectious disease drug targets: the SSGCID. Abstract: The NIAID-funded SSGCID is a consortium established to...

Note: This page contains sample records for the topic "achieving eu targets" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Enterprise Assessments Targeted Review,Y-12 National Security...  

Office of Environmental Management (EM)

Y-12 National Security Complex - March 2015 Enterprise Assessments Targeted Review,Y-12 National Security Complex - March 2015 March 2015 Targeted Review of Work Planning and...

442

EV Everywhere Electric Drive Workshop: Preliminary Target-Setting...  

Broader source: Energy.gov (indexed) [DOE]

Electric Drive Workshop: Preliminary Target-Setting Framework EV Everywhere Electric Drive Workshop: Preliminary Target-Setting Framework Presentation given at the EV Everywhere...

443

Antibody-free, targeted mass-spectrometric approach for quantification...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

free, targeted mass-spectrometric approach for quantification of proteins at low picogram per milliliter levels in Antibody-free, targeted mass-spectrometric approach for...

444

Fluorescent Multiblock ?-Conjugated Polymer Nanoparticles for In Vivo Tumor Targeting  

E-Print Network [OSTI]

Highly fluorescent multiblock conjugated polymer nanoparticles with folic acid surface ligands are highly effective for bioimaging and in vivo tumor targeting. The targeted nanoparticles were preferentially localized in ...

Ahmed, Eilaf

445

ascl1 target genes: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

for postgenomic analysis of mammalian gene function is gene targeting McConnell, Susan 2 Infrared lasermediated gene induction in targeted Chemistry Websites Summary: a heat shock...

446

abolishes gene targeting: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

for postgenomic analysis of mammalian gene function is gene targeting McConnell, Susan 2 Infrared lasermediated gene induction in targeted Chemistry Websites Summary: a heat shock...

447

EPA-GHG Inventory Targeted Data Collection Strategies and Software...  

Open Energy Info (EERE)

EPA-GHG Inventory Targeted Data Collection Strategies and Software Tools (Redirected from US EPA GHG Inventory Targeted Data Collection Strategies and Software Tools) Jump to:...

448

Fixed target facility at the SSC  

SciTech Connect (OSTI)

The question of whether a facility for fixed target physics should be provided at the SSC must be answered before the final technical design of the SSC can be completed, particularly if the eventual form of extraction would influence the magnet design. To this end, an enthusiastic group of experimentalists, theoreticians and accelerator specialists have studied this point. The accelerator physics issues were addressed by a group led by E. Colton whose report is contained in these proceedings. The physics addressable by fixed target was considered by many of the Physics area working groups and in particular by the Structure Function Group. This report is the summary of the working group which considered various SSC fixed target experiments and determined which types of beams and detectors would be required. 13 references, 5 figures.

Loken, S.C.; Morfin, J.G.

1985-01-01T23:59:59.000Z

449

Fixed target electroweak and hard scattering physics  

SciTech Connect (OSTI)

The possibilities for future physics and experiments involving weak and electromagnetic interactions, neutrino oscillations, general hard scattering and experiments involving nuclear targets were explored. The studies were limited to the physics accessible using fixed target experimentation. While some of the avenues explored turn out to be relatively unrewarding in the light of competition elsewhere in the world, there are a number of positive conclusions reached about experimentation in the energy range available to the Main Injector and Tevatron. Some of the experiments would benefit from the increased intensity available from the Tevatron utilizing the Main Injector, while some require this increase. Finally, some of the experiments would use the Main Injector low energy, high intensity extracted beams directly. A program of electroweak and hard scattering experiments at fixed target energies retains the potential for important contributions to physics. The key to major parts of this program would appear to be the existence of the Main Injector. 115 refs, 17 figs.

Brock, R. (Michigan State Univ., East Lansing, MI (USA)); Brown, C.N.; Montgomery, H.E. (Fermi National Accelerator Lab., Batavia, IL (USA)); Corcoran, M.D. (eds.) (Rice Univ., Houston, TX (USA))

1990-02-01T23:59:59.000Z

450

Carrots and Sticks: A Comprehensive Business Model for the Successful Achievement of Energy Efficiency Resource Standards Environmental Energy Technologies DivisionMarch 2011  

SciTech Connect (OSTI)

Energy efficiency resource standards (EERS) are a prominent strategy to potentially achieve rapid and aggressive energy savings goals in the U.S. As of December 2010, twenty-six U.S. states had some form of an EERS with savings goals applicable to energy efficiency (EE) programs paid for by utility customers. The European Union has initiated a similar type of savings goal, the Energy End-use Efficiency and Energy Services Directive, where it is being implemented in some countries through direct partnership with regulated electric utilities. U.S. utilities face significant financial disincentives under traditional regulation which affects the interest of shareholders and managers in aggressively pursuing cost-effective energy efficiency. Regulators are considering some combination of mandated goals ('sticks') and alternative utility business model components ('carrots' such as performance incentives) to align the utility's business and financial interests with state and federal energy efficiency public policy goals. European countries that have directed their utilities to administer EE programs have generally relied on non-binding mandates and targets; in the U.S., most state regulators have increasingly viewed 'carrots' as a necessary condition for successful achievement of energy efficiency goals and targets. In this paper, we analyze the financial impacts of an EERS on a large electric utility in the State of Arizona using a pro-forma utility financial model, including impacts on utility earnings, customer bills and rates. We demonstrate how a viable business model can be designed to improve the business case while retaining sizable ratepayer benefits. Quantifying these concerns and identifying ways they can be addressed are crucial steps in gaining the support of major stakeholder groups - lessons that can apply to other countries looking to significantly increase savings targets that can be achieved from their own utility-administered EE programs.

Satchwell, Andrew; Cappers, Peter; Goldman, Charles

2011-03-22T23:59:59.000Z

451

Linear and angular retroreflecting interferometric alignment target  

DOE Patents [OSTI]

The present invention provides a method and apparatus for measuring both the linear displacement and angular displacement of an object using a linear interferometer system and an optical target comprising a lens, a reflective surface and a retroreflector. The lens, reflecting surface and retroreflector are specifically aligned and fixed in optical connection with one another, creating a single optical target which moves as a unit that provides multi-axis displacement information for the object with which it is associated. This displacement information is useful in many applications including machine tool control systems and laser tracker systems, among others.

Maxey, L. Curtis (Powell, TN)

2001-01-01T23:59:59.000Z

452

Prototyping of the ILC Baseline Positron Target  

SciTech Connect (OSTI)

The ILC positron system uses novel helical undulators to create a powerful photon beam from the main electron beam. This beam is passed through a titanium target to convert it into electron-positron pairs. The target is constructed as a 1 m diameter wheel spinning at 2000 RPM to smear the 1 ms ILC pulse train over 10 cm. A pulsed flux concentrating magnet is used to increase the positron capture efficiency. It is cooled to liquid nitrogen temperatures to maximize the flatness of the magnetic field over the 1 ms ILC pulse train. We report on prototyping effort on this system.

Gronberg, J; Brooksby, C; Piggott, T; Abbott, R; Javedani, J; Cook, E

2012-02-29T23:59:59.000Z

453

ALT-3 Target & CMU Version 4  

SciTech Connect (OSTI)

The third Advance Liner Technology (ALT-3) experiment is the next in a long tradition of collaborations between LANL and RFNC/VNIIEF in high-explosive pulsed-power. Here a VNIIEF provided Disk Explosive Magnetic Generator (DEMG) will drive a LANL provided experimental load and diagnostic package. The objective of the experiment is to explore the use of a cylindrical liner-ontarget in tera-Pascal equation of state measurement. This presentation will discuss version 4 of the experimental target and central measuring unit (CMU) along with R & D already performed in fabrication of the target.

Griego, Jeffrey R [Los Alamos National Laboratory; Atchison, Walter L. [Los Alamos National Laboratory; Holtkamp, David [Los Alamos National Laboratory; Oro, David M. [Los Alamos National Laboratory; Reinovsky, Robert E. [Los Alamos National Laboratory; Rousculp, Christopher L. [Los Alamos National Laboratory; Tabaka, Leonard J. [Los Alamos National Laboratory

2012-06-11T23:59:59.000Z

454

Recent developments in zinc oxide target chemistry  

SciTech Connect (OSTI)

Zinc oxide targets irradiated with high energy protons at the Los Alamos Meson Physics Facility (LAMPF) contain a number of radioactive spallation products in quantities large enough to warrant recovery. This paper describes methods for recovering {sup 7}Be, {sup 46}Sc, and {sup 48}V from such targets and offers suggestions on possible ways to recover additional isotopes. The proposed methods are based on traditional precipitation and ion exchange techniques, are readily adaptable to hot cell use, and produce no hazardous waste components. The products are obtained in moderate to high yields and have excellent radiopurity.

Heaton, R.C.; Taylor, W.A.; Phillips, D.R.; Jamriska, D.J. Sr.; Garcia, J.B.

1994-04-01T23:59:59.000Z

455

Neutron single target spin asymmetries in SIDIS  

SciTech Connect (OSTI)

The experiment E06-010 in Hall A at Jefferson Lab took data between November 2008 and February 2009 to directly measure, for the first time, the pion (and kaon) single "neutron" target-spin asymmetry (SSA) in semi-inclusive DIS from a polarized 3He target. Collins, Sivers (and Pretzelosity) neutron asymmetries are going to be extracted from the measured SSA. Details of the experiment are described together with the preliminary results of the ongoing analysis. Near future Hall A experiments on transverse nucleon spin structure are shorty reviewed.

Evaristo Cisbani

2010-04-01T23:59:59.000Z

456

Status of T2K Target 2nd Oxford-Princeton High-Power Target Workshop  

E-Print Network [OSTI]

Graphite (ToyoTanso IG-43) Current Target Design Helium cooling Graphite to titanium diffusion bond 47.0 46-Power Target Workshop Mike Fitton IG43 Graphite diffusion bonded into Ti-6Al-4V titanium, Special Techniques Group at UKAEA Culham Diffusion Bond + Graphite-Graphite bonding test Aluminium intermediate layer

McDonald, Kirk

457

What is TARGET? The Transnational Applied Research in Gender Equity Training (TARGET) project focuses on the  

E-Print Network [OSTI]

and strategies in the developing world. Articles have been culled from major academic search engines and have and present research results in academic and applied contexts What are TARGET Activities? Database Preparation TARGET participants have surveyed academic databases and are developing a searchable bibliography

Sheridan, Jennifer

458

ACHIEVING THE REQUIRED COOLANT FLOW DISTRIBUTION FOR THE ACCELERATOR PRODUCTION OF TRITIUM (APT) TUNGSTEN NEUTRON SOURCE  

SciTech Connect (OSTI)

The Accelerator Production of Tritium neutron source consists of clad tungsten targets, which are concentric cylinders with a center rod. These targets are arranged in a matrix of tubes, producing a large number of parallel coolant paths. The coolant flow required to meet thermal-hydraulic design criteria varies with location. This paper describes the work performed to ensure an adequate coolant flow for each target for normal operation and residual heat-removal conditions.

D. SIEBE; K. PASAMEHMETOGLU

2000-11-01T23:59:59.000Z

459

Laser plasma cryogenic target on translating substrate for generation of continuously repetitive EUV and soft X-ray pulses  

SciTech Connect (OSTI)

To generate continuously repetitive EUV and soft X-ray pulses with various wavelengths from laser-produced plasmas, a one-dimensionally translating substrate system with a closed He gas cryostat that can continuously supply various cryogenic targets for ?10 Hz laser pulses has been developed. The system was successfully operated at a lowest temperature of 15 K and at a maximum up-down speed of 12 mm/s. Solid Ar, Kr, and Xe layers were formed, and their growth rates and the laser crater sizes on them were studied. By optimization of the operational parameters in accordance with our design rule, it was shown that stable output power was achieved continuously from the plasma emission at frequencies of 1–10 Hz. The average soft X-ray and EUV powers obtained were 19 mW at 3.2 nm, 33 mW at 10.0 nm, and 66 mW at 10.8 nm, with 10% bandwidths, from the Ar, Kr, and Xe solid targets, respectively, with a laser power of 1 W. We will be able to achieve higher frequencies using a high beam quality laser that produces smaller craters, and can expect higher powers. Although only Ar, Kr, and Xe gases were tested in this study, the target system achieved a temperature of 15 K and can thus solidify almost all target gases, apart from H and He, and can continuously supply the solid target. The use of various target materials will enable expansion of the EUV and soft X-ray emission wavelength range.

Amano, Sho [Laboratory of Advanced Science and Technology for Industry, University of Hyogo, 3-1-2 Kouto, Kamigori-cho, Ako-gun, Hyogo 678-1205 (Japan)

2014-06-15T23:59:59.000Z

460

High Power Target Design and Operational Considerations  

E-Print Network [OSTI]

remote handling is a major driving requirement). #12;3 Managed by UT-Battelle for the U.S. Department Issues · Steady state power handling. ­ Cooling of target/enclosure window ­ wettability. ­ Hot spots systems: ­ Mercury loop operation. ­ Remote handling. · Nuclear data. #12;4 Managed by UT

McDonald, Kirk

Note: This page contains sample records for the topic "achieving eu targets" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

High density laser-driven target  

DOE Patents [OSTI]

A high density target for implosion by laser energy composed of a central quantity of fuel surrounded by a high-Z pusher shell with a low-Z ablator-pusher shell spaced therefrom forming a region filled with low-density material.

Lindl, John D. (San Ramon, CA)

1981-01-01T23:59:59.000Z

462

Radioactive Target Detection Using Wireless Sensor Network  

E-Print Network [OSTI]

. By using the physical law for nuclear radiation isotopes, this chapter proposes a statistical method for wireless sensor network data to detect and locate a hidden nuclear target in a large study area. The method shown that the proposed method is effective and efficient in detection and location of the nuclear

Zhang, Tonglin

463

The Case for Magnetized Target Fusion (MTF)  

E-Print Network [OSTI]

of conventional unmagnetized targets by orders of magnitude; (b) makes fusion "easier" for any driver; (c) makes) drivers feasible; (d) allows experimentation at much higher energy (e.g., 20 MJ implosion kinetic energy can reduce the required radial convergence to drivers can lead to a new fusion

464

Manufacturing complex silica aerogel target components  

SciTech Connect (OSTI)

Aerogel is a material used in numerous components in High Energy Density Physics targets. In the past these components were molded into the proper shapes. Artifacts left in the parts from the molding process, such as contour irregularities from shrinkage and density gradients caused by the skin, have caused LANL to pursue machining as a way to make the components.

Defriend Obrey, Kimberly Ann [Los Alamos National Laboratory; Day, Robert D [Los Alamos National Laboratory; Espinoza, Brent F [Los Alamos National Laboratory; Hatch, Doug [Los Alamos National Laboratory; Patterson, Brian M [Los Alamos National Laboratory; Feng, Shihai [Los Alamos National Laboratory

2008-01-01T23:59:59.000Z

465

0 10 20 30 40 Target Present  

E-Print Network [OSTI]

.tropicalisland.de Global spatial guidance results Guidance effectively reduces the set size to one third of the total Target Present ReactionTime(msec) Set Size Where would you look? Guiding visual search with global? Guiding visual search with global spatial information. Jeremy M Wolfe1,2 , Ester Reijnen3 , Hareem Ahmad4

466

UKNF 12 January 2005 Target Studies  

E-Print Network [OSTI]

. #12;to vacuum pump heater test wire insulators to pulsed power supply to pulsed power supply water in the target. So a new plan is needed #12;The New Plan 1. Pulsed ohmic-heating of wires replicates beam-DYNA. 4.The VISAR can be made in Laser Division at RAL. 5. Calculate the pion yield, beam heating

McDonald, Kirk

467

Target Options for a Neutrino Factory  

E-Print Network [OSTI]

;Fluidised tungsten powder: broadly compatible with baseline 1 2 3 4 · Rig contains 100 kg Tungsten IncreasingDriverPressure #12;Schematic of implementation as a Neutrino Factory target Tungsten powder hopper configurations possible #12;Pion+muon production for variable length 50% material fraction W vs 100% Hg rbeam

McDonald, Kirk

468

achieving sub-nanometre particle: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

POLICIES FOR ACHIEVING ENERGY JUSTICE IN SOCIETY: BEST PRACTICES FOR APPLYING SOLAR ENERGY) Project Center for Energy and Environmental Policy University of Delaware First...

469

E-Print Network 3.0 - achieving optimal configuration Sample...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

search results for: achieving optimal configuration Page: << < 1 2 3 4 5 > >> 1 Trafic engineering optimization methods to provide multiple IP services on a shared...

470

E-Print Network 3.0 - achieving inherent safety Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

and Information Sciences 2 The Goal Structuring Notation A Safety Argument Notation Tim Kelly and Rob Weaver Summary: that their systems achieve acceptable levels of safety. These...

471

Beating the Odds: Encouraging High-Achieving Minority Students in Science and Engineering  

ScienceCinema (OSTI)

Freeman A. Hrabowski, III, President of the University of Maryland, Baltimore County, focuses on encouraging high-achieving minority students in science and engineering.

Freeman A. Hrabowski, III

2010-09-01T23:59:59.000Z

472

E-Print Network 3.0 - achieve product safety Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

University Collection: Physics 2 A Systematic Approach to Safety Case Management Dr Tim Kelly Summary: to construct and present well reasoned arguments that their systems achieve...

473

E-Print Network 3.0 - achieve sustainable nuclear Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

as a complementary avenue to achieving a nuclear-weapons-free world. Reinforce the political... Milan Document on Nuclear Disarmament and Non-Proliferation 29 January 2010 Below...

474

E-Print Network 3.0 - achievable plutonium decontamination Sample...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

a problem The Mediterranean Antinuclear Watch (MANW) is a non - Summary: to the greenhouse effect. New Generation reactors to achieve the reuse of spent fuel. Fusion...

475

E-Print Network 3.0 - achieves development milestones Sample...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Evaluation of Techniques and Methods Used for Achieving ... Source: Basili, Victor R. - Fraunhofer Center & Department of Computer Science, University of Maryland at College...

476

achieve diversity-multiplexing gain: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

the intended signal as noise, subtracting the result out, and then decoding the desired signal, a process known as "stripping", achieves the diversity-multiplexing tradeoff (DMT)...

477

Clean Development Mechanism agricultural methodologies could help California to achieve AB 32 goals  

E-Print Network [OSTI]

agricultural methodologies could help California to achieveIts methodologies can help inform the implementation ofproject meth- odologies could help California realize its

Dinar, Ariel; Larson, Donald F; Frisbie, J. Aapris

2012-01-01T23:59:59.000Z

478

E-Print Network 3.0 - achieve fault tolerance Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

3 This document contains 3087 words. FAULT-TOLERANT COMPUTING Summary: -the-shelf computers and achieved voting and reconfiguration primarily through software. The second...

479

The role of lean manufacturing principles and strategic alternatives in achieving business goals  

E-Print Network [OSTI]

Lean Manufacturing is widely accepted as a proven method to achieve operational excellence. Many manufacturers undertake lean manufacturing implementations as a strategy to improve competitiveness and realize business ...

Ramaswamy, Dhananjay

2006-01-01T23:59:59.000Z

480

E-Print Network 3.0 - achieves tenfold improvements Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

generalization error of classification algorithms, such as structural risk minimization, ten-fold cross... achieve rates approximately from 40% to 68%. Importantly, in Section 6,...

Note: This page contains sample records for the topic "achieving eu targets" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

E-Print Network 3.0 - achieving health sector Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

8 The University of Chicago Medical Center WINS NATIONAL AWARD Summary: achievements in health care sector. The Partner for Change, with Distinction Award recognizes...

482

Clean Development Mechanism agricultural methodologies could help California to achieve AB 32 goals  

E-Print Network [OSTI]

KC. 2000. Soil carbon sequestration and land use change:for enhancing carbon sequestration. Climatic Change 80:5–2007). Consequently, carbon sequestration can be achieved by

Dinar, Ariel; Larson, Donald F; Frisbie, J. Aapris

2012-01-01T23:59:59.000Z

483

E-Print Network 3.0 - achieving extremely smooth Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

bandwidth transmission. Previous work on bandwidth smoothing has focused on the two extremes of interactive... , B S , and P allow online smoothing to achieve most of the...

484

Scientific Achievement  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas ConchasPassiveSubmitted forHighlights Nuclear Physics (NP) NPBiogenic Aerosols - Effects

485

Scientific Achievement  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas ConchasPassiveSubmitted forHighlights Nuclear Physics (NP) NPBiogenic Aerosols -

486

Scientific Achievement  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas ConchasPassiveSubmitted forHighlights Nuclear Physics (NP) NPBiogenic Aerosols -e

487

Space-charge-limited currents in an Se{sub 95}As{sub 5} chalcogenide glass-like semiconductor system containing EuF{sub 3} impurities  

SciTech Connect (OSTI)

It is established that charge carrier (hole) transport in the Al-Se{sub 95}As{sub 5} Left-Pointing-Angle-Bracket EuF{sub 3} Right-Pointing-Angle-Bracket -Te structure is effected by unipolar injection currents limited by space charges with the involvement of two capture trap groups. Shallow traps corresponding to charged intrinsic defects C{sub 1}{sup -} are related to broken selenium bonds. Deep traps corresponding to charged intrinsic defects P{sub 2}{sup -} are formed by arsenic atoms with broken coordination. It is shown that the EuF{sub 3} impurity strongly affects the concentration of the capture traps, especially those localized near the Fermi level.

Isayev, A. I.; Mekhtiyeva, S. I.; Qaribova, S. N., E-mail: sqaribova@rambler.ru [Azerbaijan National Academy of Sciences, Abdullaev Institute of Physics (Azerbaijan)

2011-12-15T23:59:59.000Z

488

Industrial recovered-materials-utilization targets for the metals and metal-products industry  

SciTech Connect (OSTI)

The National Energy Conservation Policy Act of 1978 directs DOE to set targets for increased utilization of energy-saving recovered materials for certain industries. These targets are to be established at levels representing the maximum feasible increase in utilization of recovered materials that can be achieved progressively by January 1, 1987 and is consistent with technical and economic factors. A benefit to be derived from the increased use of recoverable materials is in energy savings, as state in the Act. Therefore, emhasis on different industries in the metals sector has been related to their energy consumption. The ferrous industry (iron and steel, ferrour foundries and ferralloys), as defined here, accounts for approximately 3%, and all others for the remaining 3%. Energy consumed in the lead and zinc segments is less than 1% each. Emphasis is placed on the ferrous scrap users, followed by the aluminum and copper industries. A bibliography with 209 citations is included.

None

1980-03-01T23:59:59.000Z

489

Recovery and purification of nickel-63 from HFIR-irradiated targets  

SciTech Connect (OSTI)

The production of large quantities of high-specific-activity {sup 63}Ni (>10 Ci/g) requires both a highly enriched {sup 62}Ni target and a long irradiation period at high neutron flux. Trace impurities in the nickel and associated target materials are also activated and account for a significant fraction of the discharged activity and essentially all of the gamma activity. While most of these undesirable activation products can be removed as chloride complexes during anion exchange, chromium, present at {sup 51}Cr, and scandium, present as {sup 46}Sc, are exceptions and require additional processing to achieve the desired purity. Optimized flowsheets are discussed based upon the current development and production experience.

Williams, D.F.; O`Kelley, G.D.; Knauer, J.B.; Porter, C.E.; Wiggins, J.T.

1993-06-01T23:59:59.000Z

490

The Argonne laser-driven D target: Recent developments and progress  

SciTech Connect (OSTI)

The first direct measurements of nuclear tensor polarization p{sub zz} in a laser-driven polarized D target have been performed at Argonne. We present p{sub zz} and electron polarization P{sub e} data taken at a magnetic field of 600 G in the optical pumping cell. These results are highly indicative that spin-temperature equilibrium is achieved in the system. To prevent spin relaxation of D and K atoms as well as the molecular recombination of D atoms, the walls of the laser-driven D target are coated with organosilane compounds. We discuss a new coating technique, the {open_quotes}afterwash{close_quotes}, developed at Argonne which has yielded stable atomic fraction results when the coating is exposed to K. We also present new coating techniques for glass and Cu substrates.

Fedchak, J.A.; Bailey, K.; Cummings, W.J. [and others

1997-11-01T23:59:59.000Z

491

Routine {sup 18}F{sup -} production with 180 {mu}A to 200 {mu}A target beam current on a GE PETtrace 800 cyclotron  

SciTech Connect (OSTI)

Through upgrades and enhancements, which are now standard on current PETtrace 800 cyclotrons, a GE PETtrace cyclotron installed in 2002 has demonstrated reliable routine [{sup 18}F]FDG production at total target beam currents of 180 {mu}A without detriment to saturation and [{sup 18}F]FDG yields. Routine production at 200 {mu}A has been achieved and its evaluation is continuing. Self-shielded target using W/Cu alloy for the target body afforded a reduction in dose rate from the Havar foils by a factor of {approx} 8-10, reducing dose from the targets and need for removing targets during maintenance. The main activation product in the shield is {sup 187}W (T1/2 24 h). The {sup 60}Co ((T1/2 5.3 y) activation is about 250 times less at 24 h post EOB and is not considered a major issue despite its long half-life.

Eberl, S.; Eriksson, T.; Svedberg, O.; Norling, J.; Henderson, D.; Lam, P.; Bourdier, T.; Fulham, M. [Department of PET and Nuclear Medicine, Royal Prince Alfred Hospital, Sydney, NSW (Australia); GEMS PET Systems AB, Uppsala (Sweden); Department of PET and Nuclear Medicine, Royal Prince Alfred Hospital, Sydney, NSW (Australia)

2012-12-19T23:59:59.000Z

492

targetDP: an Abstraction of Lattice Based Parallelism with Portable Performance  

E-Print Network [OSTI]

To achieve high performance on modern computers, it is vital to map algorithmic parallelism to that inherent in the hardware. From an application developer's perspective, it is also important that code can be maintained in a portable manner across a range of hardware. Here we present targetDP (target Data Parallel), a lightweight programming layer that allows the abstraction of data parallelism for applications that employ structured grids. A single source code may be used to target both thread level parallelism (TLP) and instruction level parallelism (ILP) on either SIMD multi-core CPUs or GPU-accelerated platforms. targetDP is implemented via standard C preprocessor macros and library functions, can be added to existing applications incrementally, and can be combined with higher-level paradigms such as MPI. We present CPU and GPU performance results for a benchmark taken from the lattice Boltzmann application that motivated this work. These demonstrate not only performance portability, but also the optimisation resulting from the intelligent exposure of ILP.

Alan Gray; Kevin Stratford

2014-07-31T23:59:59.000Z

493

Emission intensity in the visible and IR spectral ranges from Si-based structures formed by direct bonding with simultaneous doping with erbium (Er) and europium (Eu)  

SciTech Connect (OSTI)

The photo- and electroluminescence spectra of silicon-based structures formed by direct bonding with simultaneous doping with rare-earth metals are studied. It is shown that emission in the visible and IR spectral ranges can be obtained from n-Si:Er/p-Si and n-Si:Eu/p-Si structures fabricated by the method suggested in the study. The results obtained make this method promising for the fabrication of optoelectronic devices.

Mezdrogina, M. M., E-mail: margaret.m@mail.ioffe.ru; Kostina, L. S.; Beliakova, E. I.; Kuzmin, R. V. [Russian Academy of Sciences, Ioffe Physical-Technical Institute (Russian Federation)] [Russian Academy of Sciences, Ioffe Physical-Technical Institute (Russian Federation)

2013-09-15T23:59:59.000Z

494

Fixed target experiments at the Fermilab Tevatron  

E-Print Network [OSTI]

This paper presents a review of the study of Exclusive Central Production at a Center of Mass energy of $\\sqrt{s}=40$ GeV at the Fermilab Fixed Target program. In all reactions reviewed in this paper, protons with an energy of 800 GeV were extracted from the Tevatron accelerator at Fermilab and directed to a Liquid Hydrogen target. The states reviewed include $\\pi^+\\pi^-$, $K^0_s K^0_s$, $ K^0_sK^\\pm\\pi^\\mp$, $\\phi\\phi$ and $D^{*\\pm}$. Partial Wave Analysis results will be presented on the light states but only the cross section will be reviewed in the diffractive production of $D^{*\\pm}$

Gaston Gutierrez; Marco A. Reyes

2014-09-29T23:59:59.000Z

495

Flow mapping for an ESS horizontal target  

SciTech Connect (OSTI)

In the target of the European spallation neutron source (ESS), the beam line is horizontal and the mercury is fully forced by a pump in a parallel channel geometry. The top front of the assembly is a hemicylindrical wall, where the beam enters and is thus called a window. The main body is partitioned by a horizontal separation plate into the upper and the lower flow channels. The target liquid flows in the lower channel to the window region, turns there, and flows out in the upper channel. A thermal-hydraulic study is under way to investigate the general behavior of the flow in this configuration. The present experimental work is the first step of an effort to validate computer codes. The model used in this investigation is two-dimensional and uses water.

Takeda, Y.; Kikura, H.; Taishi, T. [Paul Scherrer Institute, Villigen (Switzerland)

1997-12-01T23:59:59.000Z

496

Recovery of niobium from irradiated targets  

DOE Patents [OSTI]

A process for selective separation of niobium from proton irradiated molybdenum targets is provided and includes dissolving the molybdenum target in a hydrogen peroxide solution to form a first ion-containing solution, contacting the first ion-containing solution with a cationic resin whereby ions selected form the group consisting of molybdenum, biobium, technetium, selenium, vanadium, arsenic, germanium, zirconium and rubidium remain in a second ion-containing solution while ions selected from the group consisting of rubidium, zinc, beryllium, cobalt, iron, manganese, chromium, strontium, yttrium and zirconium are selectively adsorbed by the cationic resin; adjusting the pH of the second ion-containing solution to within a range of from about 5.0 to about 6.0; contacting the pH adjusting second ion-containing solution with a dextran-based material for a time to selectively separate niobium from the solution and recovering the niobium from the dextran-based material.

Phillips, Dennis R. (Los Alamos, NM); Jamriska, Sr., David J. (Los Alamos, NM); Hamilton, Virginia T. (Los Alamos, NM)

1994-01-01T23:59:59.000Z

497

Target Diagnostics Supports NIF's Path to Ignition  

SciTech Connect (OSTI)

The physics requirements derived from the National Ignition Facility (NIF) experimental campaigns are leading to a wide variety of target diagnostics. Software development for the control and analysis of these diagnostics is included in the NIF Integrated Computer Control System, Diagnostic Control System and Data Visualization. These projects implement the configuration, controls, data analysis and visual representation of most of these diagnostics. To date, over 40 target diagnostics have been developed to support NIF experiments. In 2011 diagnostics were developed or enhanced to measure Ignition performance in a high neutron yield environment. Performance is optimized around four key variables: Adiabat (a) which is the strength and timing of four shocks delivered to the target, Velocity (V) of the imploding target, Mix (M) is the uniformity of the burn, and the Shape (S) of the imploding Deuterium Tritium (DT) hot spot. The diagnostics used to measure each of these parameters is shown in figure 1. Adiabat is measured using the Velocity Interferometer System for Any Reflector (VISAR) diagnostic consisting of three streak cameras. To provide for more accurate adiabat measurements the VISAR streak cameras were enhanced in FY11 with a ten comb fiducial signal controller to allow for post shot correction of the streak camera sweep non-linearity. Mix is measured by the Neutron Time of Flight (NTOF) and Radiochemical Analysis of Gaseous Samples (RAGS) diagnostics. To accommodate high neutron yield shots, NTOF diagnostic controls are being modified to use Mach Zehnder interferometer signals to allow the digitizers to be moved from near the target chamber to the neutron shielded diagnostic mezzanine. In December 2011 the first phase of RAGS diagnostic commissioning will be completed. This diagnostic will analyze the tracers that are added to NIF target capsules that undergo nuclear reactions during the shot. These gases are collected and purified for nuclear counting by the RAGS system. Three new instrument controllers were developed and commissioned to support this diagnostic. A residual-gas analyzer (RGA) instrument measures the gas content at various points in the system. The Digital Gamma Spectrometer instrument measures the radiological spectrum of the decaying gas isotopes. A final instrument controller was developed to interface to a PLC based Gas collection system. In order to support the implosion velocity measurements an additional Gated X-ray Detector (GXD) diagnostic was tested and commissioned. This third GXD views the target through a slit contained in its snout and allows the other GXD diagnostics to be used for measuring the shape on the same shot. In order to measure the implosion shape in a high neutron environment, Actide Readout In A Neutron Environment (ARIANE) and Neutron Imaging (NI) diagnostics were commissioned. The controls for ARIANE, a fixed port gated x-ray imager, contain a neutron shielded camera and micro channel plate pulser with its neutron sensitive electronics located in the diagnostic mezzanine. The NI diagnostic is composed of two Spectral Instruments SI-1000 cameras located 20M from the target and provides neutron images of the DT hot spot for high yield shots. The development and commissioning of these new or enhanced diagnostics in FY11 have provided meaningful insight that facilitates the optimization of the four key Ignition variables. In FY12 they will be adding three new diagnostics and enhancing four existing diagnostics in support of the continuing optimization series of campaigns.

Shelton, R

2011-12-07T23:59:59.000Z

498

Performance limits for exo-clutter Ground Moving Target Indicator (GMTI) radar.  

SciTech Connect (OSTI)

The performance of a Ground Moving Target Indicator (GMTI) radar system depends on a variety of factors, many which are interdependent in some manner. It is often difficult to 'get your arms around' the problem of ascertaining achievable performance limits, and yet those limits exist and are dictated by physics. This report identifies and explores those limits, and how they depend on hardware system parameters and environmental conditions. Ultimately, this leads to a characterization of parameters that offer optimum performance for the overall GMTI radar system. While the information herein is not new to the literature, its collection into a single report hopes to offer some value in reducing the 'seek time'.

Doerry, Armin Walter

2010-09-01T23:59:59.000Z

499

Achieving Water Use Efficiency in Irrigation Districts Ronald C. Griffin1  

E-Print Network [OSTI]

policy. Introduction Rising water scarcity in the western United States has spotlighted irrigationAchieving Water Use Efficiency in Irrigation Districts Ronald C. Griffin1 Abstract: Irrigation districts are challenging places to achieve efficient water use when the ultimate water users do

Griffin, Ronald

500

Achieving Energy Savings with Highly-Controlled Lighting in an Open-Plan  

E-Print Network [OSTI]

LBNL-3831E Achieving Energy Savings with Highly- Controlled Lighting in an Open-Plan Office Author-Controlled Lighting 1 of 50 April 19, 2010 Achieving Energy Savings with Highly-Controlled Lighting in an Open Berkeley National Laboratory #12;Highly-Controlled Lighting 2 of 50 April 19, 2010 DISCLAIMER This document