Sample records for accordent capture station

  1. State of structures of the Kolyma hydroelectric station according to data of on-site observations

    SciTech Connect (OSTI)

    Kuznetsov, V.S.; Voinovich, A.P.; Matroshilina, T.V.; Krupin, V.A.; Bulatov, S.N.

    1995-10-01T23:59:59.000Z

    On-site inspections of the Kolyma hydroelectric power station have been performed since 1979. A large quantity of data has been obtained pertaining to the dam, underground powerhouse, and other structures. Over 2000 measuring instruments were installed for checking the structures and foundations.

  2. A Pion Production and Capture System for a 4 MW Target Station

    SciTech Connect (OSTI)

    Ding, X.; Kirk, H.; Berg, J.S.

    2010-06-01T23:59:59.000Z

    A study of a pion production and capture system for a 4 MW target station for a neutrino factory or muon collider is presented. Using the MARS code, we simulate the pion production produced by the interaction of a free liquid mercury jet with an intense proton beam. We study the variation of meson production with the direction of the proton beam relative to the target. We also examine the influence on the meson production by the focusing of the proton beam. The energy deposition in the capture system is determined and the shielding required in order to avoid radiation damage is discussed. The exploration for the multiple proton beam entry directions relative to mercury jet in the 8GeV proton beam case demonstrates that an asymmetric layout is required in order to achieve the same beam/jet crossing angle at the jet axis. We find a correlation between the distance of beam relative to the jet and the meson production. The peak meson production is 8% higher than for the lowest case. The examination of the influence on the meson production by the focusing of the proton beam shows the meson production loss is negligible (<1%) for a beta function to be 0.3m or higher for the proton beam. By investigating the energy deposition in the target/capture system, we see that the bulk of 4-MW proton beam power is deposited in the water cooled tungsten-carbide (WC) shielding, the mercury jet and the capture beam pipe. In addition, high power deposition in the first superconducting coil causes an issue for its operation and life time. Enhanced shielding is necessary to lower the radiation damage.

  3. co2 capture | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    CO2 Capture Technology Meeting Dates: June 23-26, 2015 Registration Fee: 360.00 Venue: 300 West Station Square Drive Pittsburgh, PA 15219-1122 Phone: (412)261-2000...

  4. ACCORDS BILATRAUX PROGRAMME ERASMUS

    E-Print Network [OSTI]

    Vermet, Franck

    ACCORDS BILAT�RAUX PROGRAMME ERASMUS code début fin coordinateur Allemagne D BONN01 222 TRADUC EMDEN01 6,9 OTHERS ENGINEERING 2005 2013 SCIENCES D EMDEN01 11,3 COMPUTER SCIENCE 2004 2013 M. LE PARC D BILAT�RAUX PROGRAMME ERASMUS code début fin coordinateur Angleterre UK ABERYST01 9,8 TRANSLATION, INTER

  5. 10 Carbon Capture and Storage in the UK Yasmin E. Bushby Scottish Centre for Carbon Storage, School

    E-Print Network [OSTI]

    10 Carbon Capture and Storage in the UK Yasmin E. Bushby ­ Scottish Centre for Carbon Storage fossil fuels which in turn produces approximately one third of total UK CO2 emissions. Carbon Capture stations and industrial facilities. Existing power stations can be retrofitted with carbon capture

  6. Feasibility of air capture

    E-Print Network [OSTI]

    Ranjan, Manya

    2010-01-01T23:59:59.000Z

    Capturing CO2 from air, referred to as Air Capture, is being proposed as a viable climate change mitigation technology. The two major benefits of air capture, reported in literature, are that it allows us to reduce the ...

  7. Accordingly

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    on the requirements of the magnet measurements. In order to measure the main field, multipole coefficients and the location of the magnetic center axis, two sets of coils are...

  8. PALM - Laser Capture Microdissection | EMSL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    PALM - Laser Capture Microdissection PALM - Laser Capture Microdissection This Laser Capture Microdissection system is equipped with 100 x objective lens for enriching distinct...

  9. Cryogenic Carbon Capture

    SciTech Connect (OSTI)

    None

    2010-07-15T23:59:59.000Z

    IMPACCT Project: SES is developing a process to capture CO2 from the exhaust gas of coal-fired power plants by desublimation - the conversion of a gas to a solid. Capturing CO2 as a solid and delivering it as a liquid avoids the large energy cost of CO2 gas compression. SES’ capture technology facilitates the prudent use of available energy resources. Coal is our most abundant energy resource and is an excellent fuel for baseline power production. SES capture technology can capture 99% of the CO2 emissions in addition to a wide range of other pollutants more efficiently and at lower costs than existing capture technologies. SES’ capture technology can be readily added to our existing energy infrastructure.

  10. Optimization of compression and storage requirements at hydrogen refueling stations.

    SciTech Connect (OSTI)

    Elgowainy, A.; Mintz, M.; Kelly, B.; Hooks, M.; Paster, M. (Energy Systems); (Nexant, Inc.); (TIAX LLC)

    2008-01-01T23:59:59.000Z

    The transition to hydrogen-powered vehicles requires detailed technical and economic analyses of all aspects of hydrogen infrastructure, including refueling stations. The cost of such stations is a major contributor to the delivered cost of hydrogen. Hydrogen refueling stations require not only dispensers to transfer fuel onto a vehicle, but also an array of such ancillary equipment as a cascade charging system, storage vessels, compressors and/or pumps/evaporators. This paper provides detailed information on design requirements for gaseous and liquid hydrogen refueling stations and their associated capital and operating costs, which in turn impact hydrogen selling price at various levels of hydrogen demand. It summarizes an engineering economics approach which captures the effect of variations in station size, seasonal, daily and hourly demand, and alternative dispensing rates and pressures on station cost. Tradeoffs in the capacity of refueling station compressors, storage vessels, and the cascade charging system result in many possible configurations for the station. Total costs can be minimized by optimizing that configuration. Using a methodology to iterate among the costs of compression, storage and cascade charging, it was found that the optimum hourly capacity of the compressor is approximately twice the station's average hourly demand, and the optimum capacity of the cascade charging system is approximately 15% of the station's average daily demand. Further, for an hourly demand profile typical of today's gasoline stations, onsite hydrogen storage equivalent to at least 1/3 of the station's average daily demand is needed to accommodate peak demand.

  11. Capturing Energy Upgrades

    Broader source: Energy.gov [DOE]

    Provides an overview of how to capture the value of energy efficiency upgrades in the real estate market, from CNT Energy.

  12. Reversible Acid Gas Capture

    ScienceCinema (OSTI)

    Dave Heldebrant

    2012-12-31T23:59:59.000Z

    Pacific Northwest National Laboratory scientist David Heldebrant demonstrates how a new process called reversible acid gas capture works to pull carbon dioxide out of power plant emissions.

  13. IMPACCT: Carbon Capture Technology

    SciTech Connect (OSTI)

    None

    2012-01-01T23:59:59.000Z

    IMPACCT Project: IMPACCT’s 15 projects seek to develop technologies for existing coal-fired power plants that will lower the cost of carbon capture. Short for “Innovative Materials and Processes for Advanced Carbon Capture Technologies,” the IMPACCT Project is geared toward minimizing the cost of removing carbon dioxide (CO2) from coal-fired power plant exhaust by developing materials and processes that have never before been considered for this application. Retrofitting coal-fired power plants to capture the CO2 they produce would enable greenhouse gas reductions without forcing these plants to close, shifting away from the inexpensive and abundant U.S. coal supply.

  14. LANSCE | Materials Test Station

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Research Facility Training Office Contact Administrative nav background Materials Test Station dotline Testing New Reactor Fuels that Reduce Radioactive Waste Mission Used...

  15. ATK - Supersonic Carbon Capture

    ScienceCinema (OSTI)

    Castrogiovanni, Anthony (ACEnT Laboratories, President and CEO); Calayag, Bon (ATK, Program Manager)

    2014-04-11T23:59:59.000Z

    ATK and ACEnt Laboratories, with the help of ARPA-E funding, have taken an aerospace problem, supersonic condensation, and turned it into a viable clean energy solution for carbon capture.

  16. ATK - Supersonic Carbon Capture

    SciTech Connect (OSTI)

    Castrogiovanni, Anthony (ACEnT Laboratories, President and CEO) [ACEnT Laboratories, President and CEO; Calayag, Bon (ATK, Program Manager) [ATK, Program Manager

    2014-03-05T23:59:59.000Z

    ATK and ACEnt Laboratories, with the help of ARPA-E funding, have taken an aerospace problem, supersonic condensation, and turned it into a viable clean energy solution for carbon capture.

  17. SUSY Les Houches Accord 2

    SciTech Connect (OSTI)

    Allanach, B.; Balazs, C.; Belanger, G.; Bernhardt, M.; Boudjema, F.; Choudhury, D.; Desch, K.; Ellwanger, U.; Gambino, P.; Godbole, R.; Goto, T.; /Cambridge U., DAMTP /Monash U. /Annecy, LAPTH /Bonn U. /Harish-Chandra Res. Inst. /Orsay, LPT /Turin U. /INFN, Turin /Bangalore, Indian Inst. Sci. /KEK, Tsukuba /Barcelona U.

    2007-11-08T23:59:59.000Z

    The Supersymmetry Les Houches Accord (SLHA) [1] provides a universal set of conventions for conveying spectral and decay information for supersymmetry analysis problems in high energy physics. Here, we propose extensions of the conventions of the first SLHA to include various generalizations: the minimal supersymmetric standard model with violation of CP, R-parity, and flavor, as well as the simplest next-to-minimal model.

  18. Mountaineer Commerical Scale Carbon Capture and Storage (CCS) Project

    SciTech Connect (OSTI)

    Deanna Gilliland; Matthew Usher

    2011-12-31T23:59:59.000Z

    The Final Technical documents all work performed during the award period on the Mountaineer Commercial Scale Carbon Capture & Storage project. This report presents the findings and conclusions produced as a consequence of this work. As identified in the Cooperative Agreement DE-FE0002673, AEP's objective of the Mountaineer Commercial Scale Carbon Capture and Storage (MT CCS II) project is to design, build and operate a commercial scale carbon capture and storage (CCS) system capable of treating a nominal 235 MWe slip stream of flue gas from the outlet duct of the Flue Gas Desulfurization (FGD) system at AEP's Mountaineer Power Plant (Mountaineer Plant), a 1300 MWe coal-fired generating station in New Haven, WV. The CCS system is designed to capture 90% of the CO{sub 2} from the incoming flue gas using the Alstom Chilled Ammonia Process (CAP) and compress, transport, inject and store 1.5 million tonnes per year of the captured CO{sub 2} in deep saline reservoirs. Specific Project Objectives include: (1) Achieve a minimum of 90% carbon capture efficiency during steady-state operations; (2) Demonstrate progress toward capture and storage at less than a 35% increase in cost of electricity (COE); (3) Store CO{sub 2} at a rate of 1.5 million tonnes per year in deep saline reservoirs; and (4) Demonstrate commercial technology readiness of the integrated CO{sub 2} capture and storage system.

  19. GETTING CARBON CAPTURE AND STORAGE

    E-Print Network [OSTI]

    Haszeldine, Stuart

    GETTING CARBON CAPTURE AND STORAGE TECHNOLOGIES TO MARKET BREAKING THE DEADLOCK Report of a Science: Carbon Capture and Storage © OECD/IEA 2009, fig. 1, p. 6 Figures 2 and 3 reprinted with permission from `UK Carbon storage and capture, where is it?' by Stuart Haszeldine, Professor of Carbon Capture

  20. Motion Capture Technologies Jessica Hodgins

    E-Print Network [OSTI]

    Treuille, Adrien

    a few dof) #12;Production Pipeline #12;What is captured? · Dynamic motions? House of Moves #12;What is captured? · Scale? Motion Analysis #12;What is captured? · Non-rigid objects? House of Moves #12;What is captured? · Props often cause problems ­ Ball in pingpong ­ Fly fishing ­ Sword · Passive behaviors

  1. Sandia Energy - Carbon Capture

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Scienceand RequirementsCoatings Initiated at PNNL's Sequim BayCapture Home Carbon Capture The

  2. Carbon Smackdown: Carbon Capture

    ScienceCinema (OSTI)

    Jeffrey Long

    2010-09-01T23:59:59.000Z

    In this July 9, 2010 Berkeley Lab summer lecture, Lab scientists Jeff Long of the Materials Sciences and Nancy Brown of the Environmental Energy Technologies Division discuss their efforts to fight climate change by capturing carbon from the flue gas of power plants, as well as directly from the air

  3. Neutron capture therapies

    DOE Patents [OSTI]

    Yanch, Jacquelyn C. (Cambridge, MA); Shefer, Ruth E. (Newton, MA); Klinkowstein, Robert E. (Winchester, MA)

    1999-01-01T23:59:59.000Z

    In one embodiment there is provided an application of the .sup.10 B(n,.alpha.).sup.7 Li nuclear reaction or other neutron capture reactions for the treatment of rheumatoid arthritis. This application, called Boron Neutron Capture Synovectomy (BNCS), requires substantially altered demands on neutron beam design than for instance treatment of deep seated tumors. Considerations for neutron beam design for the treatment of arthritic joints via BNCS are provided for, and comparisons with the design requirements for Boron Neutron Capture Therapy (BNCT) of tumors are made. In addition, exemplary moderator/reflector assemblies are provided which produce intense, high-quality neutron beams based on (p,n) accelerator-based reactions. In another embodiment there is provided the use of deuteron-based charged particle reactions to be used as sources for epithermal or thermal neutron beams for neutron capture therapies. Many d,n reactions (e.g. using deuterium, tritium or beryllium targets) are very prolific at relatively low deuteron energies.

  4. Muon capture at PSI

    E-Print Network [OSTI]

    Peter Winter

    2010-12-17T23:59:59.000Z

    Measuring the rate of muon capture in hydrogen provides one of the most direct ways to study the axial current of the nucleon. The MuCap experiment uses a negative muon beam stopped in a time projection chamber operated with ultra-pure hydrogen gas. Surrounded by a decay electron detector, the lifetime of muons in hydrogen can be measured to determine the singlet capture rate Lambda_s to a final precision of 1%. The capture rate determines the nucleon's pseudoscalar form factor g_p. A first result, g_p = 7.3 +- 1.1, has been published and the final analysis of the full statistics will reduce the error by a factor of up to 3. Muon capture on the deuteron probes the weak axial current in the two-nucleon system. Within the framework of effective field theories the calculation of such two-nucleon processes involving the axial current requires the knowledge of one additional low energy constant which can be extracted from the doublet capture rate Lambda_d. The same constant then allows to model-independently calculate related processes such as solar pp-fusion or neutrino-deuteron scattering. The MuSun experiment will deduce Lambda_d to better than 1.5%. The experiment uses the MuCap detection setup with a new time projection chamber operated with deuterium at 30K and several hardware upgrades. The system is currently fully commissioned and the main physics data taking will start in 2011.

  5. Thermal neutron capture gamma-rays

    SciTech Connect (OSTI)

    Tuli, J.K.

    1983-01-01T23:59:59.000Z

    The energy and intensity of gamma rays as seen in thermal neutron capture are presented. Only those (n,..cap alpha..), E = thermal, reactions for which the residual nucleus mass number is greater than or equal to 45 are included. These correspond to evaluations published in Nuclear Data Sheets. The publication source data are contained in the Evaluated Nuclear Structure Data File (ENSDF). The data presented here do not involve any additional evaluation. Appendix I lists all the residual nuclides for which the data are included here. Appendix II gives a cumulated index to A-chain evaluations including the year of publication. The capture gamma ray data are given in two tables - the Table 1 is the list of all gamma rays seen in (n,..gamma..) reaction given in the order of increasing energy; the Table II lists the gamma rays according to the nuclide.

  6. Active Space Debris Removal using Capture and Ejection 

    E-Print Network [OSTI]

    Missel, Jonathan William

    2013-04-25T23:59:59.000Z

    object as well as its launch vehicle and parts thereof." Based on this de ni- tion, space debris are uncontrolled space objects serving no function, such as expired satellites, jettisoned components, and collision shrapnel. Traveling at speeds around.... Many alternative proposals to remove space debris have been made: laser impingement [5], ground-based laser design \\Project Orion" [3], ion guns [4], remote vehicles that capture debris and return to a central station [6], passively intercepting...

  7. Active Space Debris Removal using Capture and Ejection

    E-Print Network [OSTI]

    Missel, Jonathan William

    2013-04-25T23:59:59.000Z

    object as well as its launch vehicle and parts thereof." Based on this de ni- tion, space debris are uncontrolled space objects serving no function, such as expired satellites, jettisoned components, and collision shrapnel. Traveling at speeds around.... Many alternative proposals to remove space debris have been made: laser impingement [5], ground-based laser design \\Project Orion" [3], ion guns [4], remote vehicles that capture debris and return to a central station [6], passively intercepting...

  8. Skate Station UF Services

    E-Print Network [OSTI]

    Pilyugin, Sergei S.

    friends, practice your English, and try new activities! Where: Skate Station Funworks We will be meeting and more orderly manner. Everyone will be served eventually. Fire Drills/Alarms: Whenever you hear a fire should park your bike in well-lighted areas and lock it up when you park it. The best lock is a U

  9. Sandia National Laboratories: Carbon Capture & Storage

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Carbon Capture & Storage High-Pressure and High-Temperature Neutron Reflectometry Cell for Solid-Fluid Interface Studies On February 21, 2013, in Carbon Capture, Carbon Capture &...

  10. Hydrogen Filling Station

    SciTech Connect (OSTI)

    Boehm, Robert F; Sabacky, Bruce; Anderson II, Everett B; Haberman, David; Al-Hassin, Mowafak; He, Xiaoming; Morriseau, Brian

    2010-02-24T23:59:59.000Z

    Hydrogen is an environmentally attractive transportation fuel that has the potential to displace fossil fuels. The Freedom CAR and Freedom FUEL initiatives emphasize the importance of hydrogen as a future transportation fuel. Presently, Las Vegas has one hydrogen fueling station powered by natural gas. However, the use of traditional sources of energy to produce hydrogen does not maximize the benefit. The hydrogen fueling station developed under this grant used electrolysis units and solar energy to produce hydrogen fuel. Water and electricity are furnished to the unit and the output is hydrogen and oxygen. Three vehicles were converted to utilize the hydrogen produced at the station. The vehicles were all equipped with different types of technologies. The vehicles were used in the day-to-day operation of the Las Vegas Valley Water District and monitoring was performed on efficiency, reliability and maintenance requirements. The research and demonstration utilized for the reconfiguration of these vehicles could lead to new technologies in vehicle development that could make hydrogen-fueled vehicles more cost effective, economical, efficient and more widely used. In order to advance the development of a hydrogen future in Southern Nevada, project partners recognized a need to bring various entities involved in hydrogen development and deployment together as a means of sharing knowledge and eliminating duplication of efforts. A road-mapping session was held in Las Vegas in June 2006. The Nevada State Energy Office, representatives from DOE, DOE contractors and LANL, NETL, NREL were present. Leadership from the National hydrogen Association Board of Directors also attended. As a result of this session, a roadmap for hydrogen development was created. This roadmap has the ability to become a tool for use by other road-mapping efforts in the hydrogen community. It could also become a standard template for other states or even countries to approach planning for a hydrogen future. Project partners also conducted a workshop on hydrogen safety and permitting. This provided an opportunity for the various permitting agencies and end users to gather to share experiences and knowledge. As a result of this workshop, the permitting process for the hydrogen filling station on the Las Vegas Valley Water District’s land was done more efficiently and those who would be responsible for the operation were better educated on the safety and reliability of hydrogen production and storage. The lessons learned in permitting the filling station and conducting this workshop provided a basis for future hydrogen projects in the region. Continuing efforts to increase the working pressure of electrolysis and efficiency have been pursued. Research was also performed on improving the cost, efficiency and durability of Proton Exchange Membrane (PEM) hydrogen technology. Research elements focused upon PEM membranes, electrodes/catalysts, membrane-electrode assemblies, seals, bipolar plates, utilization of renewable power, reliability issues, scale, and advanced conversion topics. Additionally, direct solar-to-hydrogen conversion research to demonstrate stable and efficient photoelectrochemistry (PEC) hydrogen production systems based on a number of optional concepts was performed. Candidate PEC concepts included technical obstacles such as inefficient photocatalysis, inadequate photocurrent due to non-optimal material band gap energies, rapid electron-hole recombination, reduced hole mobility and diminished operational lifetimes of surface materials exposed to electrolytes. Project Objective 1: Design, build, operate hydrogen filling station Project Objective 2: Perform research and development for utilizing solar technologies on the hydrogen filling station and convert two utility vehicles for use by the station operators Project Objective 3: Increase capacity of hydrogen filling station; add additional vehicle; conduct safety workshop; develop a roadmap for hydrogen development; accelerate the development of photovoltaic components Project Objective 4:

  11. 22 carbon capture journal -March -April 2008 Transport and Storage

    E-Print Network [OSTI]

    22 carbon capture journal - March - April 2008 Transport and Storage Transport and storage research- ing invested into a study into suitable carbon storage sites in Wellsville, Ohio, according to local Omnibus Spending bill. Coolimba and CO2CRC in major CO2 storage study www.coolimbapower.com.au Coolimba

  12. Alternative Fueling Station Locator

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: Alternative Fuels Data Center Home PageStation LocationsGeneseeValleyPerformance

  13. Alternative Fueling Station Locator

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: Alternative Fuels Data Center Home PageStation LocationsGeneseeValleyPerformance

  14. Fragment capture device

    DOE Patents [OSTI]

    Payne, Lloyd R. (Los Lunas, NM); Cole, David L. (Albuquerque, NM)

    2010-03-30T23:59:59.000Z

    A fragment capture device for use in explosive containment. The device comprises an assembly of at least two rows of bars positioned to eliminate line-of-sight trajectories between the generation point of fragments and a surrounding containment vessel or asset. The device comprises an array of at least two rows of bars, wherein each row is staggered with respect to the adjacent row, and wherein a lateral dimension of each bar and a relative position of each bar in combination provides blockage of a straight-line passage of a solid fragment through the adjacent rows of bars, wherein a generation point of the solid fragment is located within a cavity at least partially enclosed by the array of bars.

  15. Robust automated knowledge capture.

    SciTech Connect (OSTI)

    Stevens-Adams, Susan Marie; Abbott, Robert G.; Forsythe, James Chris; Trumbo, Michael Christopher Stefan; Haass, Michael Joseph; Hendrickson, Stacey M. Langfitt

    2011-10-01T23:59:59.000Z

    This report summarizes research conducted through the Sandia National Laboratories Robust Automated Knowledge Capture Laboratory Directed Research and Development project. The objective of this project was to advance scientific understanding of the influence of individual cognitive attributes on decision making. The project has developed a quantitative model known as RumRunner that has proven effective in predicting the propensity of an individual to shift strategies on the basis of task and experience related parameters. Three separate studies are described which have validated the basic RumRunner model. This work provides a basis for better understanding human decision making in high consequent national security applications, and in particular, the individual characteristics that underlie adaptive thinking.

  16. Idaho_SheepStation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville PowerCherries 82981-1cnHigh School footballHydrogenIT |Hot Springs Site #0104Sheep Station Site

  17. Transit Infrastructure Finance Through Station Location Auctions

    E-Print Network [OSTI]

    Ian Carlton

    2009-01-01T23:59:59.000Z

    Numerous route and station options Strong real estate marketreal estate market Transit friendly constituents Numerous route and station options

  18. Air Capture Introduction and Overview

    E-Print Network [OSTI]

    first." It is much cheaper to capture CO2 from the flue gas of a coal power plant than from ambient air largely eliminated centralized sources of CO2 emissions, especially at coal and natural gas power plants of a facility that captures CO2 from the flue gas of a coal power plant, keeping all possible assumptions

  19. Wachs Cutter Tooling Station (4495)

    Broader source: Energy.gov (indexed) [DOE]

    purchase, build and install Wachs cutter tooling. The Wachs Cutter Tooling Station is similar to previously operated facility tooling and will utilize an existing hydraulic unit....

  20. Hydrogen vehicle fueling station

    SciTech Connect (OSTI)

    Daney, D.E.; Edeskuty, F.J.; Daugherty, M.A.; Prenger, F.C.; Hill, D.D.

    1995-09-01T23:59:59.000Z

    The authors describe a hydrogen vehicle fueling station that receives and stores hydrogen in liquid form and dispenses it either as a liquid or compressed gas. The economics that accrue from the favorable weight and volume advantages of liquid hydrogen support this concept both now and probably for some time to come. The model for liquid transfer to a 120-liter vehicle tank shows that transfer times under five minutes are feasible with pump-assisted transfer, or for pressure transfer with subcooling greater than 1 K. The model for compressed gas transfer shows that underfilling of nearly 30% can occur during rapid filling. Cooling the fill gas to 214 K completely eliminates underfilling.

  1. Knowledge Capture and Transfer Program

    Broader source: Energy.gov [DOE]

    The Office of Learning and Workforce Development is working with Heads of Departmental Elements, DOE senior leaders and subject-matter-experts to capture and transfer the knowledge and experiences...

  2. Experience with capture cavity II

    SciTech Connect (OSTI)

    Koeth, T.; /Fermilab /Rutgers U., Piscataway; Branlard, J.; Edwards, H.; Fliller, R.; Harms, E.; Hocker, A.; McGee, M.; Pischalnikov, Y.; Prieto, P.; Reid, J.; /Fermilab

    2007-06-01T23:59:59.000Z

    Valuable experience in operating and maintaining superconducting RF cavities in a horizontal test module has been gained with Capture Cavity II. We report on all facets of our experience to date.

  3. Prospects for Improved Carbon Capture Technology

    E-Print Network [OSTI]

    Prospects for Improved Carbon Capture Technology Report to the Congressional Research Service Capture Technology i Table of Contents CHAPTER 1. EXECUTIVE SUMMARY ................................................................................................................ 7 CHAPTER 3. OVERVIEW OF CO2 CAPTURE TECHNOLOGIES

  4. Fuel Station Procedure Applicability All

    E-Print Network [OSTI]

    Moore, Paul A.

    Fuel Station Procedure Applicability All Last Revised 11/20/12 Procedure Owner Andrew Grant agrant for the purchasing and distribution of fuel for vehicles owned by Bowling Green State University (BGSU). This centralization is important to ensure compliance for BGSU employees who use the centralized fuel station and fuel

  5. BREAKDOWN OR BREAKTHROUGH? The Copenhagen Accord

    E-Print Network [OSTI]

    .U., have made commitments to curb global warming pollution and report on their actions and emissions, Mexico and others. At the same time, the Copenhagen Accord is clearly a work in progress. As President warming pollution. As I said yesterday, not having a law in hand is the biggest reason

  6. Hydrogen Refueling Station Costs in Shanghai

    E-Print Network [OSTI]

    Weinert, Jonathan X.; Shaojun, Liu; Ogden, J; Jianxin, Ma

    2006-01-01T23:59:59.000Z

    04 Hydrogen Refueling Station Costs in Shanghai Jonathan X.Hydrogen Refueling Station Costs in Shanghai Jonathan X.voltage connections) Capital costs for this equipment must

  7. Hydrogen refueling station costs in Shanghai

    E-Print Network [OSTI]

    Weinert, Jonathan X.; Shaojun, Liu; Ogden, Joan M; Jianxin, Ma

    2007-01-01T23:59:59.000Z

    Kingdom; 2004. [8] Amos W. Costs of storing and transportingcon- nections). Capital costs for this equipment must bein an analysis of station costs. Total station construction

  8. Station Footprint: Separation Distances, Storage Options, and...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Station Footprint: Separation Distances, Storage Options, and Pre-Cooling Station Footprint: Separation Distances, Storage Options, and Pre-Cooling This presentation by Aaron...

  9. Stations; A Multimedia Performance for Eight Players

    E-Print Network [OSTI]

    Giracello, Robert Francis

    2010-01-01T23:59:59.000Z

    RIVERSIDE Stations; A Multimedia Performance for EightDISSERTATION Stations; A Multimedia Performance for Eightthe tragic drama in a multimedia theater environment. Table

  10. Energy Department Launches Alternative Fueling Station Locator...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Department Launches Alternative Fueling Station Locator App Energy Department Launches Alternative Fueling Station Locator App November 7, 2013 - 11:16am Addthis As part of...

  11. Hydrogen Refueling Station Costs in Shanghai

    E-Print Network [OSTI]

    Weinert, Jonathan X.; Shaojun, Liu; Ogden, J; Jianxin, Ma

    2006-01-01T23:59:59.000Z

    Costs Annualized Investment Cost, 1000$/yr Total AnnualizedH2 Fueling Stations Investment Cost Cost ($/yr) OperatingH2 Fueling Stations Investment Cost Cost ($/kg) Operating

  12. Celilo Converter Station - October 2005

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Asbestos has been removed from the station. Old, noisy, maintenance-in- tensive air-cooling has been replaced with an effi - cient, closed loop water-cooled system. Chemical...

  13. 1 Introduction Synthetic motion capture

    E-Print Network [OSTI]

    Terzopoulos, Demetri

    animation of animals in virtual worlds, but at significant computational cost. Syn- thetic motion capture). Lifelike virtual animals naturally beckon active in- volvement, and one feels compelled to interact also form the basis of Miller's snakes and worms (Miller 1988), the virtual humans of Hodgins et al

  14. Grazing Studies on the Amarillo Conservation Experiment Station 1943-49.

    E-Print Network [OSTI]

    Baker, John P.; Jones, John H.; Whitfield, Charles J. (Charles James)

    1949-01-01T23:59:59.000Z

    GRAZING STUDIES ON THE AMAR!LLO CONSERVATION EXPERIMENT STATION 1943-49 * in cooperation with the UNITED STATES DEPARTMENT OF AGRICULTURE THE COVER PICTURE Cholice grade ye'arling steers are shown on summer pasturage at the Amarillo Conser...- vation Experiment Station. Fall-purchased steer calves which are well wintered, become grass fat by September, provided the past~rage is grazed according to conservation practices. This has been true even in dry years. These studies on the Amarillo...

  15. Natural materials for carbon capture.

    SciTech Connect (OSTI)

    Myshakin, Evgeniy M. (National Energy Technology Laboratory, Pittsburgh, PA); Romanov, Vyacheslav N. (National Energy Technology Laboratory, Pittsburgh, PA); Cygan, Randall Timothy

    2010-11-01T23:59:59.000Z

    Naturally occurring clay minerals provide a distinctive material for carbon capture and carbon dioxide sequestration. Swelling clay minerals, such as the smectite variety, possess an aluminosilicate structure that is controlled by low-charge layers that readily expand to accommodate water molecules and, potentially, carbon dioxide. Recent experimental studies have demonstrated the efficacy of intercalating carbon dioxide in the interlayer of layered clays but little is known about the molecular mechanisms of the process and the extent of carbon capture as a function of clay charge and structure. A series of molecular dynamics simulations and vibrational analyses have been completed to assess the molecular interactions associated with incorporation of CO2 in the interlayer of montmorillonite clay and to help validate the models with experimental observation.

  16. Carbon Capture and Storage Realising the potential?

    E-Print Network [OSTI]

    Haszeldine, Stuart

    Carbon Capture and Storage Realising the potential? UKERC Research Project #12;Carbon Capture Winskel University of Edinburgh Peter Pearson and Stathis Arapostathis Low Carbon Research Institute @UKERKHQ #12;UKERC Research Project: Carbon Capture and Storage: Realising the potential? 01 It is the hub

  17. NOAA PMEL Station Chemistry Data

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Quinn, Patricia

    Submicron and supermicron samples are analyzed by ion chromatography for Cl-, NO3-, SO4-2, Na+, NH4+, K+, Mg2+, and Ca+2. The analysis of MSA-, Br-, and oxalate has been added to some stations. Samples also are analyzed for total mass by gravimetric analysis at 55 +/- 5% RH.

  18. Mobile Alternative Fueling Station Locator

    SciTech Connect (OSTI)

    Not Available

    2009-04-01T23:59:59.000Z

    The Department of Energy's Alternative Fueling Station Locator is available on-the-go via cell phones, BlackBerrys, or other personal handheld devices. The mobile locator allows users to find the five closest biodiesel, electricity, E85, hydrogen, natural gas, and propane fueling sites using Google technology.

  19. LIQUIDSLIQUIDS GISAXSGISAXSGISAXS/WAXS station

    E-Print Network [OSTI]

    Ohta, Shigemi

    Beamline CapabilitiesBeamline Capabilities Sector 12-ID. Poster updated March 2014. #12;LIQUIDSLIQUIDS GISAXSGISAXSGISAXS/WAXS station: * Energy range: 2.1 to 24 keV * Low divergence mode: * Energy range: 6.5 to 24 keV * Beam focus:

  20. Realistic costs of carbon capture

    SciTech Connect (OSTI)

    Al Juaied, Mohammed (Harvard Univ., Cambridge, MA (US). Belfer Center for Science and International Affiaris); Whitmore, Adam (Hydrogen Energy International Ltd., Weybridge (GB))

    2009-07-01T23:59:59.000Z

    There is a growing interest in carbon capture and storage (CCS) as a means of reducing carbon dioxide (CO2) emissions. However there are substantial uncertainties about the costs of CCS. Costs for pre-combustion capture with compression (i.e. excluding costs of transport and storage and any revenue from EOR associated with storage) are examined in this discussion paper for First-of-a-Kind (FOAK) plant and for more mature technologies, or Nth-of-a-Kind plant (NOAK). For FOAK plant using solid fuels the levelised cost of electricity on a 2008 basis is approximately 10 cents/kWh higher with capture than for conventional plants (with a range of 8-12 cents/kWh). Costs of abatement are found typically to be approximately US$150/tCO2 avoided (with a range of US$120-180/tCO2 avoided). For NOAK plants the additional cost of electricity with capture is approximately 2-5 cents/kWh, with costs of the range of US$35-70/tCO2 avoided. Costs of abatement with carbon capture for other fuels and technologies are also estimated for NOAK plants. The costs of abatement are calculated with reference to conventional SCPC plant for both emissions and costs of electricity. Estimates for both FOAK and NOAK are mainly based on cost data from 2008, which was at the end of a period of sustained escalation in the costs of power generation plant and other large capital projects. There are now indications of costs falling from these levels. This may reduce the costs of abatement and costs presented here may be 'peak of the market' estimates. If general cost levels return, for example, to those prevailing in 2005 to 2006 (by which time significant cost escalation had already occurred from previous levels), then costs of capture and compression for FOAK plants are expected to be US$110/tCO2 avoided (with a range of US$90-135/tCO2 avoided). For NOAK plants costs are expected to be US$25-50/tCO2. Based on these considerations a likely representative range of costs of abatement from CCS excluding transport and storage costs appears to be US$100-150/tCO2 for first-of-a-kind plants and perhaps US$30-50/tCO2 for nth-of-a-kind plants.The estimates for FOAK and NOAK costs appear to be broadly consistent in the light of estimates of the potential for cost reductions with increased experience. Cost reductions are expected from increasing scale, learning on individual components, and technological innovation including improved plant integration. Innovation and integration can both lower costs and increase net output with a given cost base. These factors are expected to reduce abatement costs by approximately 65% by 2030. The range of estimated costs for NOAK plants is within the range of plausible future carbon prices, implying that mature technology would be competitive with conventional fossil fuel plants at prevailing carbon prices.

  1. Bioenergy with Carbon Capture and Sequestration WorkshopBioenergy...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Bioenergy with Carbon Capture and Sequestration WorkshopBioenergy with Carbon Capture and Sequestration (BECCS) Workshop Bioenergy with Carbon Capture and Sequestration...

  2. Study of Porous Adsorbents for Carbon Capture via Molecular Simulation

    E-Print Network [OSTI]

    Swisher, Joseph Andrew

    2012-01-01T23:59:59.000Z

    4 Ab initio carbon capture Background . . . . . .K. ; Haranczyk, M. ; Carbon Capture Materials Database;silico screening of carbon capture mate- rials” C Additional

  3. Water Challenges for Geologic Carbon Capture and Sequestration

    E-Print Network [OSTI]

    Newmark, Robin L.; Friedmann, Samuel J.; Carroll, Susan A.

    2010-01-01T23:59:59.000Z

    and HB 90:Carbon capture and sequestration, http://legisweb.6th annual conference on carbon capture and sequestration,7th annual conference on carbon capture & seques- tration,

  4. Perspectives on Carbon Capture and Sequestration in the United States

    E-Print Network [OSTI]

    Wong-Parodi, Gabrielle

    2011-01-01T23:59:59.000Z

    Community acceptance of carbon capture and sequestrationThe public perceptions of carbon capture and storage Workingproblems and prospects Carbon Capture and Sequestration:

  5. Perspectives on Carbon Capture and Sequestration in the United States

    E-Print Network [OSTI]

    Wong-Parodi, Gabrielle

    2011-01-01T23:59:59.000Z

    Community acceptance of carbon capture and sequestrationand realities of carbon capture and storage; www.eenews.net/Howard. What Future for Carbon Capture and Sequestration?

  6. Perspectives on Carbon Capture and Sequestration in the United States

    E-Print Network [OSTI]

    Wong-Parodi, Gabrielle

    2011-01-01T23:59:59.000Z

    Carbon capture and sequestration technology A.4 Carbon capture and sequestration technology Today,as ‘carbon capture and storage’ technologies (Steinberg

  7. Carbon Capture and Storage, 2008

    ScienceCinema (OSTI)

    None

    2010-01-08T23:59:59.000Z

    The U.S. Department of Energy is researching the safe implementation of a technology called carbon sequestration, also known as carbon capture and storage, or CCS. Based on an oilfield practice, this approach stores carbon dioxide, or CO2 generated from human activities for millennia as a means to mitigate global climate change. In 2003, the Department of Energys National Energy Technology Laboratory formed seven Regional Carbon Sequestration Partnerships to assess geologic formations suitable for storage and to determine the best approaches to implement carbon sequestration in each region. This video describes the work of these partnerships.

  8. Carbon Capture and Storage, 2008

    SciTech Connect (OSTI)

    2009-03-19T23:59:59.000Z

    The U.S. Department of Energy is researching the safe implementation of a technology called carbon sequestration, also known as carbon capture and storage, or CCS. Based on an oilfield practice, this approach stores carbon dioxide, or CO2 generated from human activities for millennia as a means to mitigate global climate change. In 2003, the Department of Energys National Energy Technology Laboratory formed seven Regional Carbon Sequestration Partnerships to assess geologic formations suitable for storage and to determine the best approaches to implement carbon sequestration in each region. This video describes the work of these partnerships.

  9. Carbon Capture Research and Development

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office511041clothAdvanced Materials Advanced. C o w l i t z C o . C l a r8.05CarBen Version 3Capture

  10. Capture of Irregular Satellites at Jupiter

    E-Print Network [OSTI]

    Nesvorny, D; Deienno, R

    2014-01-01T23:59:59.000Z

    The irregular satellites of outer planets are thought to have been captured from heliocentric orbits. The exact nature of the capture process, however, remains uncertain. We examine the possibility that irregular satellites were captured from the planetesimal disk during the early Solar System instability when encounters between the outer planets occurred (Nesvorny, Vokrouhlicky & Morbidelli 2007, AJ 133; hereafter NVM07). NVM07 already showed that the irregular satellites of Saturn, Uranus and Neptune were plausibly captured during planetary encounters. Here we find that the current instability models present favorable conditions for capture of irregular satellites at Jupiter as well, mainly because Jupiter undergoes a phase of close encounters with an ice giant. We show that the orbital distribution of bodies captured during planetary encounters provides a good match to the observed distribution of irregular satellites at Jupiter. The capture efficiency for each particle in the original transplanetary d...

  11. COMPARATIVE COSTS OF CALIFORNIA CENTRAL STATION ELECTRICITY

    E-Print Network [OSTI]

    Laughlin, Robert B.

    CALIFORNIA ENERGY COMMISSION COMPARATIVE COSTS OF CALIFORNIA CENTRAL STATION ELECTRICITY GENERATION and Anitha Rednam, Comparative Costs of California Central Station Electricity Generation Technologies................................................................................................... 1 CHAPTER 1: Summary of Technology Costs

  12. Silica aerogel for capturing intact interplanetary dust particles for the Tanpopo experiment

    E-Print Network [OSTI]

    Tabata, Makoto; Kawai, Hideyuki; Imai, Eiichi; Kawaguchi, Yuko; Hashimoto, Hirofumi; Yamagishi, Akihiko

    2015-01-01T23:59:59.000Z

    In this paper, we report the progress in developing a silica-aerogel-based cosmic dust capture panel for use in the Tanpopo experiment on the International Space Station (ISS). Previous studies revealed that ultralow-density silica aerogel tiles comprising two layers with densities of 0.01 and 0.03 g/cm$^3$ developed using our production technique were suitable for achieving the scientific objectives of the astrobiological mission. A special density configuration (i.e., box framing) aerogel with a holder was designed to construct the capture panels. Qualification tests for an engineering model of the capture panel as an instrument aboard the ISS were successful. Sixty box-framing aerogel tiles were manufactured in a contamination-controlled environment.

  13. 7.1.1. Fernbahnhof / Rail Station

    E-Print Network [OSTI]

    Berlin,Technische Universität

    Fernbahnhofs 7.1.1.4.5 Kälteversorgung des Fernbahnhofs / Cooling Supply of Rail Station 7 Abwasserversorgung des Fernbahnhofs / Fresh and Used Water Supply of Rail Stations 7.1.1.4.1.1 Verfahren zur Fernbahnhofs 7.1.1.4.2 Stromversorgung des Fernbahnhofs / Power Supply of Rail Station 7

  14. Technical data HMS 760 X -36 stations

    E-Print Network [OSTI]

    Shoubridge, Eric

    water/rinse stations - 2 dry stations / or 2 pressure controlled DI stations - 60 slides per basket - 1. - Simultaneous multiple program execution for several programs. - Carriers for up to 2 slide baskets with 30 downwards ventilation flow and active charcoal filter. - Permanent program memory for more than 50 different

  15. UK CARBON CAPTURE AND STORAGE, WHERE IS IT ? Stuart Haszeldine

    E-Print Network [OSTI]

    Haszeldine, Stuart

    437 UK CARBON CAPTURE AND STORAGE, WHERE IS IT ? Stuart Haszeldine Professor of Carbon Capture.haszeldine@ed.ac.uk SUMMARY Carbon capture and storage, to capture CO2 from power plants and big industry, remains much

  16. New result for the neutron 9be capture at astrophysical energies

    E-Print Network [OSTI]

    S. B. Dubovichenko

    2013-11-21T23:59:59.000Z

    The total cross sections of the n9Be --> gamma10Be radiative capture are described in the framework of the modified potential cluster model (MPCM) with the classification of orbital states according to Young tableaux at thermal and astrophysical energies.

  17. APS Colloquium 2006

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Accordent's Capture Station, is being used to capture and publish video presentations. XXX Quantum Control of Light: From Slow Light and Fast Cars to Nuclear Gamma Ray...

  18. Workshop on neutron capture therapy

    SciTech Connect (OSTI)

    Fairchild, R.G.; Bond, V.P. (eds.)

    1986-01-01T23:59:59.000Z

    Potentially optimal conditions for Neutron Capture Therapy (NCT) may soon be in hand due to the anticipated development of band-pass filtered beams relatively free of fast neutron contaminations, and of broadly applicable biomolecules for boron transport such as porphyrins and monoclonal antibodies. Consequently, a number of groups in the US are now devoting their efforts to exploring NCT for clinical application. The purpose of this Workshop was to bring these groups together to exchange views on significant problems of mutual interest, and to assure a unified and effective approach to the solutions. Several areas of preclinical investigation were deemed to be necessary before it would be possible to initiate clinical studies. As neither the monomer nor the dimer of sulfhydryl boron hydride is unequivocally preferable at this time, studies on both compounds should be continued until one is proven superior.

  19. Bad data packet capture device

    DOE Patents [OSTI]

    Chen, Dong; Gara, Alan; Heidelberger, Philip; Vranas, Pavlos

    2010-04-20T23:59:59.000Z

    An apparatus and method for capturing data packets for analysis on a network computing system includes a sending node and a receiving node connected by a bi-directional communication link. The sending node sends a data transmission to the receiving node on the bi-directional communication link, and the receiving node receives the data transmission and verifies the data transmission to determine valid data and invalid data and verify retransmissions of invalid data as corresponding valid data. A memory device communicates with the receiving node for storing the invalid data and the corresponding valid data. A computing node communicates with the memory device and receives and performs an analysis of the invalid data and the corresponding valid data received from the memory device.

  20. Subsurface capture of carbon dioxide

    DOE Patents [OSTI]

    Blount, Gerald; Siddal, Alvin A.; Falta, Ronald W.

    2014-07-22T23:59:59.000Z

    A process and apparatus of separating CO.sub.2 gas from industrial off-gas source in which the CO.sub.2 containing off-gas is introduced deep within an injection well. The CO.sub.2 gases are dissolved in the, liquid within the injection well while non-CO.sub.2 gases, typically being insoluble in water or brine, are returned to the surface. Once the CO.sub.2 saturated liquid is present within the injection well, the injection well may be used for long-term geologic storage of CO.sub.2 or the CO.sub.2 saturated liquid can be returned to the surface for capturing a purified CO.sub.2 gas.

  1. Urban Atmospheres captures a unique, synergistic moment

    E-Print Network [OSTI]

    Paulos, Eric

    Urban Atmospheres captures a unique, synergistic moment ­ expanding urban populations, rapid EDITORS Eric Paulos Intel Research eric@paulos.net Tom Jenkins Royal College of Art thomas

  2. Capturing Latino Students in the Academic Pipeline

    E-Print Network [OSTI]

    Gándara, Patricia; Larson, Katherine; Mehan, Hugh; Rumberger, Russell

    1998-01-01T23:59:59.000Z

    The Latino Educational Pipeline Why Latino Students are atSTUDENTS IN THE ACADEMIC PIPELINE CAPTURING LATINO STUDENTSIN THE ACADEMIC PIPELINE Patricia Gcindara, Editor Katherine

  3. Sandia National Laboratories: carbon capture and storage

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    carbon capture and storage ECIS-I2CNER: Hydrogen Infrastructure Research Aids Energy Independence Goal On February 14, 2013, in CRF, Energy, Livermore Valley Open Campus (LVOC),...

  4. Radiative proton capture on $^6$He

    E-Print Network [OSTI]

    E. Sauvan; F. M. Marqués; H. W. Wilschut; N. A. Orr

    2001-02-20T23:59:59.000Z

    Radiative capture of protons is investigated as a probe of clustering in nuclei far from stability. The first such measurement on a halo nucleus is reported here for the reaction $^6$He(p,$\\gamma$) at 40 MeV. Capture into $^7$Li is observed as the strongest channel. In addition, events have been recorded that may be described by quasi-free capture on a halo neutron, the $\\alpha$ core and $^5$He. The possibility of describing such events by capture into the continuum of $^7$Li is also discussed.

  5. Seventh annual report of the Texas Agricultural Experiment Station for the year 1894. 

    E-Print Network [OSTI]

    Connell, J. H.; Harrington, H. H.; Francis, M.; Price, R. H.; Adriance, Duncan; Clayton, James

    1895-01-01T23:59:59.000Z

    . ............................................... J. H. CONNELL, M. SC Director. ......................................... H. H. HARRINGTON, M. SC.. Chemist. ......................................... M. FRANCIS, D. V. 3f ..Veterinarian. .......................................... R. H. PRICE, B... submitted, M. FRANCIS, Veterinar ian. REPORT OF THE HORTICULTURIST. 1 COLTXGE STATION, TEXAS, January 12, 1895. J. H. Connell, Directo: : DEAR SIR-In accordance with your request, I present herewith the report of the Department of Horticulture...

  6. Amine Degradation in CO2 Capture. 2. New degradation products of MEA. Pyrazine and alkyl pyrazines: analysis, mechanism of formation and toxicity.

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Amine Degradation in CO2 Capture. 2. New degradation products of MEA. Pyrazine and alkyl pyrazines Degradation in CO2 Capture. 2. New degradation products of MEA. Pyrazine and alkyl pyrazines: analysis degradation products, and some of them could be potentially dangerous to humans or environment according

  7. Dubuque generation station, Dubuque, Iowa

    SciTech Connect (OSTI)

    Peltier, R.

    2008-10-15T23:59:59.000Z

    Alliant Energy's Dubuque generation station is a fine example of why small does not mean insignificant in the power generation industry. This winner of the EUCG best performer award in the small plant category shows that its operating excellence towers over that of many larger and much newer coal-fired power plants. The plant has three operating units with boilers originally designed for Illinois basin coal but now Powder River Basin coal makes up 75% of the coal consumed. The boilers can also burn natural gas. 4 photos.

  8. Hanford Meteorological Station - Hanford Site

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOnItem NotEnergy,ARMFormsGasReleaseSpeechesHallNot Logged In You|DidYouKnowStation Hanford

  9. Financing Capture Ready Coal-Fired Power Plants in China by Issuing Capture Options

    E-Print Network [OSTI]

    Liang, Xi; Reiner, David; Gibbons, Jon; Li, Jia

    investors diversify risk, and offer global warming investors an alternative investment opportunity. As a detailed case study, we assess the value of a Capture Option and Capture Ready plant for a 600 MW supercritical pulverized coal power plant in China...

  10. March 2005 Number 238 CARBON CAPTURE AND

    E-Print Network [OSTI]

    Mather, Tamsin A.

    March 2005 Number 238 CARBON CAPTURE AND STORAGE (CCS) As part of the government's global strategy. This POSTnote discusses the potential of carbon capture and storage (CCS), a method of carbon sequestration2 and will be included in the forthcoming Department of Trade and Industry (DTI) Carbon Abatement Technology Strategy

  11. Microfluidic Platforms for Capturing Circulating Tumor Cells

    E-Print Network [OSTI]

    Tang, William C

    Microfluidic Platforms for Capturing Circulating Tumor Cells Sweta Gupta, Allison C. Baker-cost microfluidic device that can be used to isolate and capture circulating tumor cells (CTCs) from whole blood. The device was made from polydimethylsiloxane (PDMS) consisting of a microfluidic channel with microposts

  12. Feasibility of Air Capture Manya Ranjan

    E-Print Network [OSTI]

    . This shows that the cost of this technology is probably prohibitive. The difficulty of air capture stems from change mitigation options. Such high costs make relying on this technology for mitigating carbonFeasibility of Air Capture by Manya Ranjan Bachelor of Technology, Chemical Engineering Indian

  13. Pion capture and transport system for PRISM

    E-Print Network [OSTI]

    McDonald, Kirk

    solenoid cold mass Transport pions+muons in long 2T solenoid channelPion capture and transport system for PRISM M. Yoshida Osaka Univ. 2005/8/28 NuFACT06 at UCI #12 and transport system proton beam Phase rotator PRIME detector #12;Concepts of pion capture/transport system

  14. TS525 Construction Total Station

    E-Print Network [OSTI]

    Ahmad, Sajjad

    generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance limits for radio noise emissions from digital apparatus as set out in the radio interference regulations brouillage radioélectrique édicté par le Ministère des Communications du Canada. Europe This product has been

  15. Inner-Shell Capture and Ionization in Collisions of H+, He2+, and Li3+ Projectiles with Neon and Carbon

    E-Print Network [OSTI]

    Ford, A. Lewis; Reading, John F.; Becker, R. L.

    1981-01-01T23:59:59.000Z

    PHYSICAL REVIEW A VOLUME 23, NUMBF R FEBRUARY 1981 Inner-shell capture and ionization in collisions of H+, He'+, and Li'+ projectiles with neon and carbon A. L. Ford~ and J. F. Reading* Physics Department, Texas A &M University, College Station...) Li++ Ne, and (d) H'+ C. The open triangles in (d) are results calculated with the carbon X-shell orbital energy adjusted to give the experimental K-shell binding energy. Note that the scale on the vertical axis is lin- ear. INNER-SHELL CAPTURE...

  16. Performance Evaluation and Analysis Consortium End Station |...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    highlighting the "bucket" algorithm from UIUC. Credit: Leonid Oliker, Lawrence Berkeley National Laboratory Performance Evaluation and Analysis Consortium End Station PI Name:...

  17. Hydrogen refueling station costs in Shanghai

    E-Print Network [OSTI]

    Weinert, Jonathan X.; Shaojun, Liu; Ogden, Joan M; Jianxin, Ma

    2007-01-01T23:59:59.000Z

    Fueling stations; Cost; Shanghai; Fuel cell vehicles 1.and the delivery cost for fuel cell vehicles, however, itthus hydrogen cost therefore depend on the ?eet of fuel cell

  18. Computational Optimization of Gas Compressor Stations: MINLP ...

    E-Print Network [OSTI]

    Daniel Rose

    2015-02-26T23:59:59.000Z

    Feb 26, 2015 ... Abstract: When considering cost-optimal operation of gas transport networks, compressor stations play the most important role. Proper ...

  19. Hydrogen refueling station costs in Shanghai

    E-Print Network [OSTI]

    Weinert, Jonathan X.; Shaojun, Liu; Ogden, Joan M; Jianxin, Ma

    2007-01-01T23:59:59.000Z

    total installed capital cost (TIC) 1% Of TIC 25% Estimate ofcost estimates for six station types SMR 100 a Equipment capital

  20. Kansas Nuclear Profile - Wolf Creek Generating Station

    U.S. Energy Information Administration (EIA) Indexed Site

    April 2012" "Next Release Date: February 2013" "Wolf Creek Generating Station" "Unit","Summer capacity (mw)","Net generation (thousand mwh)","Summer capacity factor...

  1. Washington Nuclear Profile - Columbia Generating Station

    U.S. Energy Information Administration (EIA) Indexed Site

    Columbia Generating Station" "Unit","Summer capacity (mw)","Net generation (thousand mwh)","Summer capacity factor (percent)","Type","Commercial operation date","License expiration...

  2. Illinois Nuclear Profile - Dresden Generating Station

    U.S. Energy Information Administration (EIA) Indexed Site

    Dresden Generating Station" "Unit","Summer capacity (mw)","Net generation (thousand mwh)","Summer capacity factor (percent)","Type","Commercial operation date","License expiration...

  3. Illinois Nuclear Profile - Clinton Power Station

    U.S. Energy Information Administration (EIA) Indexed Site

    Clinton Power Station" "Unit","Summer capacity (mw)","Net generation (thousand mwh)","Summer capacity factor (percent)","Type","Commercial operation date","License expiration date"...

  4. Illinois Nuclear Profile - Byron Generating Station

    U.S. Energy Information Administration (EIA) Indexed Site

    Byron Generating Station" ,"Summer capacity (mw)","Net generation (thousand mwh)","Summer capacity factor (percent)","Type","Commercial operation date","License expiration date"...

  5. Massachusetts Nuclear Profile - Pilgrim Nuclear Power Station

    U.S. Energy Information Administration (EIA) Indexed Site

    Pilgrim Nuclear Power Station" "Unit","Summer capacity (mw)","Net generation (thousand mwh)","Summer cpacity factor (percent)","Type","Commercial operation date","License...

  6. Illinois Nuclear Profile - Braidwood Generation Station

    U.S. Energy Information Administration (EIA) Indexed Site

    Braidwood Generation Station" "Unit","Summer capacity (mw)","Net generation (thousand mwh)","Summer capacity factor (percent)","Type","Commercial operation date","License...

  7. Sandia National Laboratories: Reference Station Design

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and the National Renewable Energy Laboratory (NREL) announce the publication of two new Hydrogen Fueling Infrastructure Research and Station Technology (H2FIRST) reports on...

  8. Sandia National Laboratories: hydrogen fueling station

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    station Widespread Hydrogen Fueling Infrastructure Is the Goal of H2FIRST Project On June 4, 2014, in Capabilities, Center for Infrastructure Research and Innovation (CIRI),...

  9. Hydrogen Fueling Infrastructure Research and Station Technology...

    Broader source: Energy.gov (indexed) [DOE]

    An Overview of the Hydrogen Fueling Infrastructure Research and Station Technology (H2FIRST) Project" held on November 18, 2014. Hydrogen Fueling Infrastructure Research and...

  10. Theoretical Screening of Mixed Solid Sorbent for Applications to CO{sub 2} Capture Technology

    SciTech Connect (OSTI)

    Duan, Yuhua

    2014-01-01T23:59:59.000Z

    Since current technologies for capturing CO{sub 2} to fight global climate change are still too energy intensive, there is a critical need for development of new materials that can capture CO{sub 2} reversibly with acceptable energy costs. Accordingly, solid sorbents have been proposed to be used for CO{sub 2} capture applications through a reversible chemical transformation. By combining thermodynamic database mining with first principles density functional theory and phonon lattice dynamics calculations, a theoretical screening methodology to identify the most promising CO{sub 2} sorbent candidates from the vast array of possible solid materials has been proposed and validated. The calculated thermodynamic properties of different classes of solid materials versus temperature and pressure changes were further used to evaluate the equilibrium properties for the CO{sub 2} adsorption/desorption cycles. According to the requirements imposed by the pre- and post- combustion technologies and based on our calculated thermodynamic properties for the CO{sub 2} capture reactions by the solids of interest, we were able to screen only those solid materials for which lower capture energy costs are expected at the desired pressure and temperature conditions. Only those selected CO{sub 2} sorbent candidates were further considered for experimental validations. The ab initio thermodynamic technique has the advantage of identifying thermodynamic properties of CO{sub 2} capture reactions without any experimental input beyond crystallographic structural information of the solid phases involved. Such methodology not only can be used to search for good candidates from existing database of solid materials, but also can provide some guidelines for synthesis new materials. In this presentation, we apply our screening methodology to mixing solid systems to adjust the turnover temperature to help on developing CO{sub 2} capture Technologies.

  11. Theoretical calculating the thermodynamic properties of solid sorbents for CO{sub 2} capture applications

    SciTech Connect (OSTI)

    Duan, Yuhua

    2012-11-02T23:59:59.000Z

    Since current technologies for capturing CO{sub 2} to fight global climate change are still too energy intensive, there is a critical need for development of new materials that can capture CO{sub 2} reversibly with acceptable energy costs. Accordingly, solid sorbents have been proposed to be used for CO{sub 2} capture applications through a reversible chemical transformation. By combining thermodynamic database mining with first principles density functional theory and phonon lattice dynamics calculations, a theoretical screening methodology to identify the most promising CO{sub 2} sorbent candidates from the vast array of possible solid materials has been proposed and validated. The calculated thermodynamic properties of different classes of solid materials versus temperature and pressure changes were further used to evaluate the equilibrium properties for the CO{sub 2} adsorption/desorption cycles. According to the requirements imposed by the pre- and post- combustion technologies and based on our calculated thermodynamic properties for the CO{sub 2} capture reactions by the solids of interest, we were able to screen only those solid materials for which lower capture energy costs are expected at the desired pressure and temperature conditions. Only those selected CO{sub 2} sorbent candidates were further considered for experimental validations. The ab initio thermodynamic technique has the advantage of identifying thermodynamic properties of CO{sub 2} capture reactions without any experimental input beyond crystallographic structural information of the solid phases involved. Such methodology not only can be used to search for good candidates from existing database of solid materials, but also can provide some guidelines for synthesis new materials. In this presentation, we first introduce our screening methodology and the results on a testing set of solids with known thermodynamic properties to validate our methodology. Then, by applying our computational method to several different kinds of solid systems, we demonstrate that our methodology can predict the useful information to help developing CO{sub 2} capture Technologies.

  12. Theoretical Screening of Mixed Solid Sorbent for Applications to CO{sub 2} Capture Technology

    SciTech Connect (OSTI)

    Duan, Yuhua

    2014-03-30T23:59:59.000Z

    Since current technologies for capturing CO{sub 2} to fight global climate change are still too energy intensive, there is a critical need for development of new materials that can capture CO{sub 2} reversibly with acceptable energy costs. Accordingly, solid sorbents have been proposed to be used for CO{sub 2} capture applications through a reversible chemical transformation. By combining thermodynamic database mining with first principles density functional theory and phonon lattice dynamics calculations, a theoretical screening methodology to identify the most promising CO{sub 2} sorbent candidates from the vast array of possible solid materials has been proposed and validated. The calculated thermodynamic properties of different classes of solid materials versus temperature and pressure changes were further used to evaluate the equilibrium properties for the CO{sub 2} adsorption/desorption cycles. According to the requirements imposed by the pre- and post- combustion technologies and based on our calculated thermodynamic properties for the CO{sub 2} capture reactions by the solids of interest, we were able to screen only those solid materials for which lower capture energy costs are expected at the desired pressure and temperature conditions. Only those selected CO{sub 2} sorbent candidates were further considered for experimental validations. The ab initio thermodynamic technique has the advantage of identifying thermodynamic properties of CO{sub 2} capture reactions without any experimental input beyond crystallographic structural information of the solid phases involved. Such methodology not only can be used to search for good candidates from existing database of solid materials, but also can provide some guidelines for synthesis new materials. In this presentation, we apply our screening methodology to mixing solid systems to adjust the turnover temperature to help on developing CO{sub 2} capture Technologies.

  13. Computational Modeling of Mixed Solids for CO2 CaptureSorbents

    SciTech Connect (OSTI)

    Duan, Yuhua

    2015-01-01T23:59:59.000Z

    Since current technologies for capturing CO2 to fight global climate change are still too energy intensive, there is a critical need for development of new materials that can capture CO2 reversibly with acceptable energy costs. Accordingly, solid sorbents have been proposed to be used for CO2 capture applications through a reversible chemical transformation. By combining thermodynamic database mining with first principles density functional theory and phonon lattice dynamics calculations, a theoretical screening methodology to identify the most promising CO2 sorbent candidates from the vast array of possible solid materials has been proposed and validated. The calculated thermodynamic properties of different classes of solid materials versus temperature and pressure changes were further used to evaluate the equilibrium properties for the CO2 adsorption/desorption cycles. According to the requirements imposed by the pre- and post- combustion technologies and based on our calculated thermodynamic properties for the CO2 capture reactions by the solids of interest, we were able to screen only those solid materials for which lower capture energy costs are expected at the desired pressure and temperature conditions. Only those selected CO2 sorbent candidates were further considered for experimental validations. The ab initio thermodynamic technique has the advantage of identifying thermodynamic properties of CO2 capture reactions without any experimental input beyond crystallographic structural information of the solid phases involved. Such methodology not only can be used to search for good candidates from existing database of solid materials, but also can provide some guidelines for synthesis new materials. In this presentation, we apply our screening methodology to mixing solid systems to adjust the turnover temperature to help on developing CO2 capture Technologies.

  14. Carbon Dioxide Capture DOI: 10.1002/anie.201000431

    E-Print Network [OSTI]

    ] Carbon capture and storage (CCS) schemes embody a group of technologies for the capture of CO2 from powerCarbon Dioxide Capture DOI: 10.1002/anie.201000431 Carbon Dioxide Capture: Prospects for New- and gas-fired power plants.[3­5] Such conven- tional technologies for large-scale capture have been com

  15. Radio Frequency Station - Beam Dynamics Interaction in Circular Accelerators

    SciTech Connect (OSTI)

    Mastoridis, Themistoklis; /Stanford U., Elect. Eng. Dept. /SLAC

    2011-03-01T23:59:59.000Z

    The longitudinal beam dynamics in circular accelerators is mainly defined by the interaction of the beam current with the accelerating Radio Frequency (RF) stations. For stable operation, Low Level RF (LLRF) feedback systems are employed to reduce coherent instabilities and regulate the accelerating voltage. The LLRF system design has implications for the dynamics and stability of the closed-loop RF systems as well as for the particle beam, and is very sensitive to the operating range of accelerator currents and energies. Stability of the RF loop and the beam are necessary conditions for reliable machine operation. This dissertation describes theoretical formalisms and models that determine the longitudinal beam dynamics based on the LLRF implementation, time domain simulations that capture the dynamic behavior of the RF station-beam interaction, and measurements from the Positron-Electron Project (PEP-II) and the Large Hadron Collider (LHC) that validate the models and simulations. These models and simulations are structured to capture the technical characteristics of the system (noise contributions, non-linear elements, and more). As such, they provide useful results and insight for the development and design of future LLRF feedback systems. They also provide the opportunity to study diverse longitudinal beam dynamics effects such as coupled-bunch impedance driven instabilities and single bunch longitudinal emittance growth. Coupled-bunch instabilities and RF station power were the performance limiting effects for PEP-II. The sensitivity of the instabilities to individual LLRF parameters, the effectiveness of alternative operational algorithms, and the possible tradeoffs between RF loop and beam stability were studied. New algorithms were implemented, with significant performance improvement leading to a world record current during the last PEP-II run of 3212 mA for the Low Energy Ring. Longitudinal beam emittance growth due to RF noise is a major concern for LHC. Simulations studies and measurements were conducted that clearly show the correlation between RF noise and longitudinal bunch emittance, identify the major LLRF noise contributions, and determine the RF component dominating this effect. With these results, LHC upgrades and alternative algorithms are evaluated to reduce longitudinal emittance growth during operations. The applications of this work are described with regard to future machines and analysis of new technical implementations, as well as to possible future work which would continue the directions of this dissertation.

  16. Retrofitting CO{sub 2} capture

    SciTech Connect (OSTI)

    Weisel, J.

    2009-07-01T23:59:59.000Z

    Retrofitting existing fossil-fueled plants with the first available carbon dioxide capture technologies could play an important role in paving the way for development of lower-cost, reliable carbon capture and storage systems. EPRI research is helping utilities better understand the engineering challenges and economic consequences. Studies are being conducted on retrofitting five different plants with advanced amine PCC technologies. Other studies include: process optimization studies; valuing operating flexibility; CO{sub 2} capture for CTCC plants; and assessing the impact of climate policy on retrofitting investment.

  17. Binary Capture Rates for Massive Protostars

    E-Print Network [OSTI]

    Nickolas Moeckel; John Bally

    2007-04-09T23:59:59.000Z

    The high multiplicity of massive stars in dense, young clusters is established early in their evolution. The mechanism behind this remains unresolved. Recent results suggest that massive protostars may capture companions through disk interactions with much higher efficiency than their solar mass counterparts. However, this conclusion is based on analytic determinations of capture rates and estimates of the robustness of the resulting binaries. We present the results of coupled n-body and SPH simulations of star-disk encounters to further test the idea that disk-captured binaries contribute to the observed multiplicity of massive stars.

  18. (Hydrogen) Service Stations 101 Steven M. Schlasner

    E-Print Network [OSTI]

    (Hydrogen) Service Stations 101 Steven M. Schlasner September 22, 2004 #12;2 DISCLAIMER Opinions · Comparison of Conventional with Hydrogen Fueling Stations · Hydrogen Fueling Life Cycle · Practical Design,000 retail outlets (350 company-owned) in 44 states · Brands: Conoco, Phillips 66, 76 · 32,800 miles pipeline

  19. Regulating carbon dioxide capture and storage

    E-Print Network [OSTI]

    De Figueiredo, Mark A.

    2007-01-01T23:59:59.000Z

    This essay examines several legal, regulatory and organizational issues that need to be addressed to create an effective regulatory regime for carbon dioxide capture and storage ("CCS"). Legal, regulatory, and organizational ...

  20. Computer simulation of neutron capture therapy.

    E-Print Network [OSTI]

    Olson, Arne Peter

    1967-01-01T23:59:59.000Z

    Analytical methods are developed to simulate on a large digital computer the production and use of reactor neutron beams f or boron capture therapy of brain tumors. The simulation accounts for radiation dose distributions ...

  1. Computer simulation of neutron capture therapy

    E-Print Network [OSTI]

    Olson, Arne Peter

    1967-01-01T23:59:59.000Z

    Analytical methods are developed to simulate on a large digital computer the production and use of reactor neutron beams f or boron capture therapy of brain tumors. The simulation accounts for radiation dose distributions ...

  2. Electrochemically mediated separation for carbon capture

    E-Print Network [OSTI]

    Simeon, Fritz

    Carbon capture technology has been proposed as an effective approach for the mitigation of anthropogenic CO[subscript 2] emissions. Thermal-swing separation technologies based on wet chemical scrubbing show potential for ...

  3. An update of muon capture on hydrogen

    E-Print Network [OSTI]

    S. Pastore; F. Myhrer; K. Kubodera

    2014-05-06T23:59:59.000Z

    The successful precision measurement of the rate of muon capture on a proton by the MuCap Collaboration allows for a stringent test of the current theoretical understanding of this process. Chiral perturbation theory, which is a low-energy effective field theory that preserves the symmetries and the pattern of symmetry breaking in the underlying theory of QCD, offers a systematic framework for describing $\\mu p$ capture and provides a basic test of QCD at the hadronic level. We describe how this effective theory with no free parameters reproduces the measured capture rate. A recent study has addressed new sources of uncertainties that were not considered in the previous works, and we review to what extent these uncertainties are now under control. Finally, the rationale for studying muon capture on the deuteron and some recent theoretical developments regarding this process are discussed.

  4. Economic assessment of CO? capture and disposal

    E-Print Network [OSTI]

    Eckaus, Richard S.; Jacoby, Henry D.; Ellerman, A. Denny.; Leung, Wing-Chi.; Yang, Zili.

    A multi-sector multi-region general equilibrium model of economic growth and emissions is used to explore the conditions that will determine the market penetration of CO2 capture and disposal technology.

  5. Capturing Chemistry in XML/CML

    E-Print Network [OSTI]

    Townsend, Joseph A; Adams, Sam; Goodman, Jonathan M; Murray-Rust, Peter; Waudby, Chris A

    Chemical Markup Language (CML) is an XML-conformant Schema that describes molecules, spectra, reactions, and computational chemistry. It is capable of capturing the chemistry in a variety of current publications and is becoming adopted by many...

  6. Determination of thermal neutron capture gamma yields.

    E-Print Network [OSTI]

    Harper, Thomas Lawrence

    1969-01-01T23:59:59.000Z

    A method of analysing Ge(Li) thermal neutron capture gamma spectra to obtain total gamma yields has been developed. Tie method determines both the yields from the well resolved gamma peaks in a spectrum as well as the gamma ...

  7. Determination of thermal neutron capture gamma yields

    E-Print Network [OSTI]

    Harper, Thomas Lawrence

    1969-01-01T23:59:59.000Z

    A method of analysing Ge(Li) thermal neutron capture gamma spectra to obtain total gamma yields has been developed. Tie method determines both the yields from the well resolved gamma peaks in a spectrum as well as the gamma ...

  8. Water Challenges for Geologic Carbon Capture and Sequestration

    E-Print Network [OSTI]

    Newmark, Robin L.; Friedmann, Samuel J.; Carroll, Susan A.

    2010-01-01T23:59:59.000Z

    for solvent-based carbon capture technologies is largely duecarbon capture and sequestration. Environmental Science and Technologycarbon capture (DOE-NETL 2007c) using the cost and performance impacts associated with CCS technologies

  9. Tri-National Agricultural Accord Rural Development Workshop

    E-Print Network [OSTI]

    deYoung, Brad

    Tri-National Agricultural Accord Rural Development Workshop Overview of Canadian Provinces April 14. Structure Structures: Federal and provincial government organization Municipal / County Community / Regional

  10. BioInvent International AB - Product Pipeline Review - 2014 According...

    Open Energy Info (EERE)

    According To Radiant Insights Home > Groups > Future of Condition Monitoring for Wind Turbines Marketresearchri's picture Submitted by Marketresearchri(45) Member 30 June, 2015...

  11. Pion-capture probabilities in organic molecules

    SciTech Connect (OSTI)

    Jackson, D.F.; Lewis, C.A.; O'Leary, K.

    1982-06-01T23:59:59.000Z

    Experimental results are presented for atomic-capture probabilities of negative pions in organic molecules. The data are analyzed in terms of atomic and molecular models. This analysis shows that the Fermi-Teller law (Z law) and its modifications do not give an adequate description of the data, but that a mesomolecular model together with hydrogen transfer contains the features essential to fit the data. Clear evidence is given for chemical effects in the pion-capture process.

  12. LNG to CNG refueling stations

    SciTech Connect (OSTI)

    Branson, J.D. [ECOGAS Corp., Austin, TX (United States)

    1995-12-31T23:59:59.000Z

    While the fleet operator is concerned about the environment, he or she is going to make the choice based primarily on economics. Which fuel provides the lowest total operating cost? The calculation of this costing must include the price-per-gallon of the fuel delivered, as well as the tangible and intangible components of fuel delivery, such as downtime for vehicles during the refueling process, idle time for drivers during refueling, emissions costings resulting from compressor oil blow-by, inclusion of non-combustible constituents in the CNG, and energy consumption during the refueling process. Also, the upfront capital requirement of similar delivery capabilities must be compared. The use of LNG as the base resource for the delivered CNG, in conjunction with the utilization of a fully temperature-compressed LNG/CNG refueling system, eliminates many of the perceived shortfalls of CNG. An LNG/CNG refueling center designed to match the capabilities of the compressor-based station will have approximately the same initial capital requirement. However, because it derives its CNG sales product from the {minus}260 F LNG base product, thus availing itself of the natural physical properties of the cryogenic product, all other economic elements of the system favor the LNG/CNG product.

  13. Neutrino oscillations and electron-capture storage-ring experiments

    E-Print Network [OSTI]

    Potzel, Walter

    2014-01-01T23:59:59.000Z

    Oscillations in the electron-capture (EC) decay rate observed in storage-ring experiments are reconsidered in connection with the neutrino mass difference. Taking into account that - according to Relativity Theory - time is slowed down in the reference frame of the orbiting charged particles as compared to the neutral particles (neutrinos) moving on a rectilinear path after the EC decay, we derive a value of $\\Delta m^{2}_{21}=(0.768\\pm0.012)\\cdot10^{-4} eV^{2}$ for the neutrino mass-squared difference which fully agrees with that observed in other neutrino-oscillation experiments. To further check the connection between EC-decay oscillations and $\\Delta m^{2}_{21}$ we suggest experiments with different orbital speeds, i.e., different values of the Lorentz factor.

  14. Neutrino oscillations and electron-capture storage-ring experiments

    E-Print Network [OSTI]

    Walter Potzel

    2015-01-20T23:59:59.000Z

    Oscillations in the electron-capture (EC) decay rate observed in storage-ring experiments are reconsidered in connection with the neutrino mass difference. Taking into account that - according to Relativity Theory - time is slowed down in the reference frame of the orbiting charged particles as compared to the neutral particles (neutrinos) moving on a rectilinear path after the EC decay, we derive a value of $\\Delta m^{2}_{21}=(0.768\\pm0.012)\\cdot10^{-4} eV^{2}$ for the neutrino mass-squared difference which fully agrees with that observed in other neutrino-oscillation experiments. To further check the connection between EC-decay oscillations and $\\Delta m^{2}_{21}$ we suggest experiments with different orbital speeds, i.e., different values of the Lorentz factor.

  15. Neutron capture by 15N nucleus at astrophysical energies

    E-Print Network [OSTI]

    S. B. Dubovichenko; N. V. Afanasyeva

    2013-04-07T23:59:59.000Z

    Within the potential cluster model with the forbidden states and an orbital states classification according to the Young diagrams the possibility of description of experimental data for the total cross-sections of radiative n15N-capture at energies from 25 to 370 keV was considered. It was shown that only on basis of the E1-transitions from the different states of n15N-scattering to the ground state of 16N nucleus in n15N-channel it is well succeed to explain the value of the total cross-sections in the considered energy range and to prognosticate its behavior at energy E 1 eV. These cross-sections at energies E 10 keV are approximated by the simple analytical form.

  16. Advanced Post-Combustion CO2 Capture Prepared for the

    E-Print Network [OSTI]

    Advanced Post-Combustion CO2 Capture Prepared for the Clean Air Task Force under a grant from...................................................................................... 3 2. Current Status of Post-Combustion Capture

  17. World's Largest Post-Combustion Carbon Capture Project Begins...

    Office of Environmental Management (EM)

    World's Largest Post-Combustion Carbon Capture Project Begins Construction World's Largest Post-Combustion Carbon Capture Project Begins Construction July 15, 2014 - 9:55am Addthis...

  18. Carbon Capture, Transport and Storage Regulatory Test Exercise...

    Open Energy Info (EERE)

    Carbon Capture, Transport and Storage Regulatory Test Exercise: Output Report Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Carbon Capture, Transport and Storage...

  19. Water Challenges for Geologic Carbon Capture and Sequestration

    E-Print Network [OSTI]

    Newmark, Robin L.; Friedmann, Samuel J.; Carroll, Susan A.

    2010-01-01T23:59:59.000Z

    and HB 90:Carbon capture and sequestration, http://legisweb.conference on carbon capture and sequestration, Pittsburgh,The DOE’s Regional Carbon Sequestration Partnerships are

  20. CO2 Capture and Storage Project, Education and Training Center...

    Broader source: Energy.gov (indexed) [DOE]

    Industrial Carbon Capture and Storage (ICCS) Project is one of the nation's largest carbon capture and storage endeavors. Part of the project includes the National...

  1. EFRC Carbon Capture and Sequestration Activities at NERSC

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    EFRC Carbon Capture and Sequestration Activities at NERSC EFRC Carbon Capture and Sequestration Activities at NERSC Why it Matters: Carbon dioxide (CO2) gas is considered to be...

  2. Energy Department Invests to Drive Down Costs of Carbon Capture...

    Energy Savers [EERE]

    Invests to Drive Down Costs of Carbon Capture, Support Reductions in Greenhouse Gas Pollution Energy Department Invests to Drive Down Costs of Carbon Capture, Support Reductions...

  3. NETL emphasizes CO{sub 2} capture from existing plants

    SciTech Connect (OSTI)

    NONE

    2008-04-01T23:59:59.000Z

    This paper gives brief description of several carbon dioxide capture projects that were directed toward a broader range of capture technologies.

  4. carbon capture rd index | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Capture Publications Patents Awards Partnering With Us About Us Contacts Staff Search Fact Sheet Research Team Members Key Contacts Carbon Capture Research & Development Carbon...

  5. Strategies for demonstration and early deployment of carbon capture and storage : a technical and economic assessment of capture percentage

    E-Print Network [OSTI]

    Hildebrand, Ashleigh Nicole

    2009-01-01T23:59:59.000Z

    Carbon capture and storage (CCS) is a critical technology for reducing greenhouse gas emissions from electricity production by coal-fired power plants. However, full capture (capture of nominally 90% of emissions) has ...

  6. San Jose Accord: energy aid or petroleum-marketing strategy

    SciTech Connect (OSTI)

    Not Available

    1982-09-30T23:59:59.000Z

    The San Jose Accord was signed in San Jose, Costa Rica on August 3, 1980 by the Presidents of Venezuela and Mexico, whereby the two countries mutually committed to supply the net imported domestic oil consumption of several Central American and Caribbean countries. Countries initially participating in the program are: Barbados, Costa Rica, Dominican Republic, El Salvador, Guatemala, Honduras, Jamaica, Nicaragua, and Panama. Seven eastern Caribbean countries were to meet on October 7 to petition for inclusion in the Accord, namely: Antigua, St. Kitt/Nevis, Montserrat, Dominica, St. Lucia, St. Vincent, and Grenada. The official language of the Accord is presented, and the operative status of the Accord two years after signing is discussed. Specific briefs about some of the individual countries in the Accord are included. The fuel price/tax series for the Western Hemisphere countries is updated.

  7. Air pollution study of Laredo Customs Station

    E-Print Network [OSTI]

    Welling, Vidyadhar Yeshwant

    1972-01-01T23:59:59.000Z

    to the General Services Admin1stration for improv1ng the air quality at the Laredo Customs Station. The study includes investigation conducted on the site at the Station and at the Environmental Wind Tunnel Facilities located on the main campus of Texas A... the accuracy of the scaled model with that of the actual station a complete survey of veloc1ty, pressure, temperature and video tape recordings were taken in Laredo. These results were then compared with those simulated in the wind tunnel. Good correlation...

  8. EVOLUTION OF PROGENITORS FOR ELECTRON CAPTURE SUPERNOVAE

    SciTech Connect (OSTI)

    Takahashi, Koh; Umeda, Hideyuki [Department of Astronomy, University of Tokyo, Tokyo 113-0033 (Japan); Yoshida, Takashi, E-mail: ktakahashi@astron.s.u-tokyo.ac.jp, E-mail: umeda@astron.s.u-tokyo.ac.jp, E-mail: yoshida@yukawa.kyoto-u.ac.jp [Yukawa Institute for Theoretical Physics, Kyoto University, Kyoto 606-8502 (Japan)

    2013-07-01T23:59:59.000Z

    We provide progenitor models for electron capture supernovae (ECSNe) with detailed evolutionary calculation. We include minor electron capture nuclei using a large nuclear reaction network with updated reaction rates. For electron capture, the Coulomb correction of rates is treated and the contribution from neutron-rich isotopes is taken into account in each nuclear statistical equilibrium (NSE) composition. We calculate the evolution of the most massive super asymptotic giant branch stars and show that these stars undergo off-center carbon burning and form ONe cores at the center. These cores become heavier up to the critical mass of 1.367 M{sub Sun} and keep contracting even after the initiation of O+Ne deflagration. Inclusion of minor electron capture nuclei causes convective URCA cooling during the contraction phase, but the effect on the progenitor evolution is small. On the other hand, electron capture by neutron-rich isotopes in the NSE region has a more significant effect. We discuss the uniqueness of the critical core mass for ECSNe and the effect of wind mass loss on the plausibility of our models for ECSN progenitors.

  9. Sandia National Laboratories: More California Gas Stations Can...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Infrastructure Research and Innovation (CIRI)More California Gas Stations Can Provide Hydrogen than Previously Thought, Sandia Study Says More California Gas Stations Can Provide...

  10. air station north: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    quality monitoring station. Application to Physics Websites Summary: considered in the area of representativeness of differs from the station measurement by more than the given...

  11. Solution Methods for the Periodic Petrol Station Replenishment ...

    E-Print Network [OSTI]

    chefi

    2013-03-11T23:59:59.000Z

    The problem of planning petrol delivery to the distribution stations is well recognized in the Operations Research literature under the name of Petrol Station ...

  12. Alternative Fueling Station Locator App Provides Info at Your...

    Broader source: Energy.gov (indexed) [DOE]

    iPhone app helps you find fueling stations that offer electricity, natural gas, biodiesel, E85, propane, or hydrogen. | Energy Department The Alternative Fueling Station...

  13. Fuel Station of the Future- Innovative Approach to Fuel Cell...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Station of the Future- Innovative Approach to Fuel Cell Technology Unveiled in California Fuel Station of the Future- Innovative Approach to Fuel Cell Technology Unveiled in...

  14. Pdc - The Worldwide Leader in Hydrogen Refueling Station Compression...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Pdc - The Worldwide Leader in Hydrogen Refueling Station Compression Pdc - The Worldwide Leader in Hydrogen Refueling Station Compression This presentation by Matther Weaver of Pdc...

  15. Hydrogen Fueling Station in Honolulu, Hawaii Feasibility Analysis...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Fueling Station in Honolulu, Hawaii Feasibility Analysis Hydrogen Fueling Station in Honolulu, Hawaii Feasibility Analysis This feasibility report assesses the technical and...

  16. The Status of COThe Status of CO22 CaptureCapture and Storage Technologyand Storage Technology

    E-Print Network [OSTI]

    ) - Post-combustion - Pre-combustion - Oxyfuel combustion - Pipeline - Tanker - Depleted oil/gas fields for CCSLeading Candidates for CCS · Fossil fuel power plants Pulverized coal combustion (PC) Natural gas: PrePre--Combustion CaptureCombustion Capture Electricity Shift Reactor Sulfur Removal Combined Cycle

  17. Financing Capture Ready Coal-Fired Power Plants in China by Issuing Capture Options

    E-Print Network [OSTI]

    Aickelin, Uwe

    Financing Capture Ready Coal-Fired Power Plants in China by Issuing Capture Options Xi Liang, Jia supercritical pulverized coal power plant in China, using a cash flow model with Monte-Carlo simulations Defense Council) O&M (Operating & Maintenance) PC Power Plant (Pulverized Coal Fired Power Plant) ROA

  18. Particle production and energy deposition studies for the Neutrino Factory target station

    E-Print Network [OSTI]

    Back, John J

    2013-01-01T23:59:59.000Z

    We present FLUKA and MARS simulation studies of the pion production and energy deposition in the Neutrino Factory baseline target station, which consists of a 4 MW proton beam interacting with a liquid mercury jet target within a 20 T solenoidal magnetic field. We show that a substantial increase in the shielding is needed to protect the superconducting coils from too much energy deposition. Investigations reveal that it is possible to reduce the magnetic field in the solenoid capture system without adversely affecting the pion production efficiency. We show estimates of the amount of concrete shielding that will be required to protect the environment from the high radiation doses generated by the target station facility. We also present yield and energy deposition results for alternative targets: gallium liquid jet, tungsten powder jet and solid tungsten bars.

  19. COMPARATIVE COSTS OF CALIFORNIA CENTRAL STATION ELECTRICITY

    E-Print Network [OSTI]

    CALIFORNIA ENERGY COMMISSION COMPARATIVE COSTS OF CALIFORNIA CENTRAL STATION ELECTRICITY GENERATIONCann Please use the following citation for this report: Klein, Joel. 2009. Comparative Costs of California............................................................................................................................1 Changes in the Cost of Generation Model

  20. CASE CRITICAL The Navajo Generating Station

    E-Print Network [OSTI]

    Hall, Sharon J.

    Republic The Navajo Generating Station, the largest coal-fired power plant in the West, provides electrical-old plant, Arizona's largest single source of carbon pollution, needs to update its pollution controls. Join

  1. Hydrogen Refueling Station Costs in Shanghai

    E-Print Network [OSTI]

    Weinert, Jonathan X.; Shaojun, Liu; Ogden, J; Jianxin, Ma

    2006-01-01T23:59:59.000Z

    and the delivery cost for fuel cell vehicles, however, itfueling stations, cost, Shanghai, fuel cell vehicles 1.0hydrogen cost therefore depend on the fleet of fuel cell

  2. The College Station Residential Energy Compliance Code

    E-Print Network [OSTI]

    Claridge, D. E.; Schrock, D.

    1988-01-01T23:59:59.000Z

    The City of College Station, Texas adopted a new residential Energy Compliance Code in January, 1988. The code, which strengthens compliance requirements in several areas, has received broadly based support and acceptance from all major constituent...

  3. Repowering of the Midland Nuclear Station 

    E-Print Network [OSTI]

    Gatlin, C. E. Jr.; Vellender, G. C.; Mooney, J. A.

    1988-01-01T23:59:59.000Z

    The conversion of the Midland Nuclear Station to a combined cycle power facility is the first of its kind. The existing nuclear steam turbine, combined with new, natural-gas-fired gas turbines, will create the largest cogeneration facility...

  4. CHARGING STATION FOR ELECTRIC VEHICLES GREEN PARKING

    E-Print Network [OSTI]

    Vellend, Mark

    CHARGING STATION FOR ELECTRIC VEHICLES P 3 P 3 P 6 GREEN PARKING UNIVERSITÉ DE SHERBROOKE YELLOW (CAR-POOLING) PERMITS HOSPITAL PARKING PARKING-PERMIT DISPENSERS RESERVED DISABLED PARKING PLACES ONE

  5. Hydrogen Refueling Station Costs in Shanghai

    E-Print Network [OSTI]

    Weinert, Jonathan X.; Shaojun, Liu; Ogden, Joan M; Jianxin, Ma

    2006-01-01T23:59:59.000Z

    Well-to-wheels analysis of hydrogen based fuel-cell vehicleJP, et al. Distributed Hydrogen Fueling Systems Analysis,”Year 2006 UCD—ITS—RR—06—04 Hydrogen Refueling Station Costs

  6. Hydrogen Fueling Infrastructure Research and Station Technology

    Broader source: Energy.gov [DOE]

    Presentation slides from the DOE Fuel Cell Technologies Office webinar "An Overview of the Hydrogen Fueling Infrastructure Research and Station Technology (H2FIRST) Project" held on November 18, 2014.

  7. Muon capture rates within the projected QRPA

    E-Print Network [OSTI]

    Danilo Sande Santos; Arturo R. Samana; Francisco Krmpoti?; Alejandro J. Dimarco

    2012-03-03T23:59:59.000Z

    The conservation of the number of particles within the QRPA plays an important role in the evaluation muon capture rates in all light nuclei with A \\precsim 30 . The violation of the CVC by the Coulomb field in this mass region is of minor importance, but this effect could be quite relevant for medium and heavy nuclei studied previously. The extreme sensitivity of the muon capture rates on the 'pp' coupling strength in nuclei with large neutron excess when described within the QRPA is pointed out. We reckon that the comparison between theory and data for the inclusive muon capture is not a fully satisfactory test on the nuclear model that is used. The exclusive muon transitions are much more robust for such a purpose.

  8. Relativistic QRPA calculation of muon capture rates

    E-Print Network [OSTI]

    T. Marketin; N. Paar; T. Niksic; D. Vretenar

    2009-03-30T23:59:59.000Z

    The relativistic proton-neutron quasiparticle random phase approximation (PN-RQRPA) is applied in the calculation of total muon capture rates on a large set of nuclei from $^{12}$C to $^{244}$Pu, for which experimental values are available. The microscopic theoretical framework is based on the Relativistic Hartree-Bogoliubov (RHB) model for the nuclear ground state, and transitions to excited states are calculated using the PN-RQRPA. The calculation is fully consistent, i.e., the same interactions are used both in the RHB equations that determine the quasiparticle basis, and in the matrix equations of the PN-RQRPA. The calculated capture rates are sensitive to the in-medium quenching of the axial-vector coupling constant. By reducing this constant from its free-nucleon value $g_A = 1.262$ by 10% for all multipole transitions, the calculation reproduces the experimental muon capture rates to better than 10% accuracy.

  9. Thermal Neutron Capture y's (CapGam)

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    The National Nuclear Data Center (NNDC) presents two tables showing energy and photon intensity with uncertainties of gamma rays as seen in thermal-neutron capture.  One table is organized in ascending order of gamma energy, and the second is organized by Z, A of the target. In the energy-ordered table the three strongest transitions are indicated in each case. The nuclide given is the target nucleus in the capture reaction. The gamma energies given are in keV. The gamma intensities given are relative to 100 for the strongest transition. %I? (per 100 n-captures) for the strongest transition is given, where known. All data are taken from the Evaluated Nuclear Structure Data File (ENSDF), a computer file of evaluated nuclear structure data and from the eXperimental Unevaluated Nuclear Data List (XUNDL). (Specialized Interface)

  10. Thermal-neutron capture in light nuclei

    SciTech Connect (OSTI)

    Raman, S. [Oak Ridge National Lab., TN (United States); Jurney, E.T.; Lynn, J.E. [Los Alamos National Lab., NM (United States)

    1996-10-01T23:59:59.000Z

    We have made considerable progress toward the goal of carrying out thermal-neutron capture {gamma}-ray measurements on all stable isotopes below A=60. Information processed till now has significantly augmented the existing knowledge on the detailed nuclear level structure of many light nuclides. Most of this knowledge comes from our {gamma}-ray energies, level placements, and branching ratios of secondary transitions between low-lying states. Spectroscopic information is also contained in the cross sections of the primary transitions originating from the capturing state. This is deduced from the success of ``direct`` theories of neutron capture for many nuclides, especially those of light and near closed-shell character. 23 refs, 1 tab, 3 figs.

  11. Solar and Infrared Radiation Station (SIRS) Handbook

    SciTech Connect (OSTI)

    Stoffel, T

    2005-07-01T23:59:59.000Z

    The Solar Infrared Radiation Station (SIRS) provides continuous measurements of broadband shortwave (solar) and longwave (atmospheric or infrared) irradiances for downwelling and upwelling components. The following six irradiance measurements are collected from a network of stations to help determine the total radiative flux exchange within the Atmospheric Radiation Measurement (ARM) Southern Great Plains (SGP) Climate Research Facility: • Direct normal shortwave (solar beam) • Diffuse horizontal shortwave (sky) • Global horizontal shortwave (total hemispheric) • Upwelling shortwave (reflected) • Downwelling longwave (atmospheric infrared) • Upwelling longwave (surface infrared)

  12. Carbon Dioxide Capture DOI: 10.1002/anie.200902836

    E-Print Network [OSTI]

    Paik Suh, Myunghyun

    Carbon Dioxide Capture DOI: 10.1002/anie.200902836 Highly Selective CO2 Capture in Flexible 3D Coordination Polymer Networks** Hye-Sun Choi and Myunghyun Paik Suh* Carbon dioxide capture has been warming, and the development of efficient methods for capturing CO2 from industrial flue gas has become

  13. Sandia Energy - Carbon Capture & Storage

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Scienceand RequirementsCoatings Initiated at PNNL's Sequim BayCapture Home Carbon Capture

  14. IEEE Standard for qualification of Class 1E lead storage batteries for nuclear power generating stations

    SciTech Connect (OSTI)

    Not Available

    1980-01-01T23:59:59.000Z

    This document describes qualification methods for Class 1E lead storage batteries and racks to be used in nuclear power generating stations outside of primary containment. Qualification required in ANSI/IEEE Std 279-1979 and IEEE Std 308-1978, can be demonstrated by using the procedures provided in this Standard in accordance with IEEE Std 323-1974. Battery sizing, maintenance, capacity testing, installation, charging equipment and consideration of other types batteries are beyond the scope of this Standard.

  15. An Assessment of the Near-Term Costs of Hydrogen Refueling Stations and Station Components

    E-Print Network [OSTI]

    Weinert, Jonathan X.; Lipman, Timothy

    2006-01-01T23:59:59.000Z

    vs. delivered hydrogen, compressor type, storage pressure).pump High-pressure hydrogen compressor Compressed hydrogenpipeline High-pressure hydrogen compressor Pipeline Station:

  16. Incremental learning for automated knowledge capture.

    SciTech Connect (OSTI)

    Benz, Zachary O.; Basilico, Justin Derrick; Davis, Warren Leon,; Dixon, Kevin R.; Jones, Brian S.; Martin, Nathaniel; Wendt, Jeremy Daniel

    2013-12-01T23:59:59.000Z

    People responding to high-consequence national-security situations need tools to help them make the right decision quickly. The dynamic, time-critical, and ever-changing nature of these situations, especially those involving an adversary, require models of decision support that can dynamically react as a situation unfolds and changes. Automated knowledge capture is a key part of creating individualized models of decision making in many situations because it has been demonstrated as a very robust way to populate computational models of cognition. However, existing automated knowledge capture techniques only populate a knowledge model with data prior to its use, after which the knowledge model is static and unchanging. In contrast, humans, including our national-security adversaries, continually learn, adapt, and create new knowledge as they make decisions and witness their effect. This artificial dichotomy between creation and use exists because the majority of automated knowledge capture techniques are based on traditional batch machine-learning and statistical algorithms. These algorithms are primarily designed to optimize the accuracy of their predictions and only secondarily, if at all, concerned with issues such as speed, memory use, or ability to be incrementally updated. Thus, when new data arrives, batch algorithms used for automated knowledge capture currently require significant recomputation, frequently from scratch, which makes them ill suited for use in dynamic, timecritical, high-consequence decision making environments. In this work we seek to explore and expand upon the capabilities of dynamic, incremental models that can adapt to an ever-changing feature space.

  17. Helmholtz Capture Solenoid Update Peter Loveridge

    E-Print Network [OSTI]

    McDonald, Kirk

    mechanical design with lateral target entry/exit slots · Start with min slot size 20 mm x 200 mm, -an design for a capture solenoid with lateral target entry/exit slots (200 mm x 20 mm) ­ Includes a basic

  18. Carbon Dioxide Capture from Coal-Fired

    E-Print Network [OSTI]

    Carbon Dioxide Capture from Coal-Fired Power Plants: A Real Options Analysis May 2005 MIT LFEE 2005. LFEE 2005-002 Report #12;#12;i ABSTRACT Investments in three coal-fired power generation technologies environment. The technologies evaluated are pulverized coal (PC), integrated coal gasification combined cycle

  19. Porphyrins for boron neutron capture therapy

    DOE Patents [OSTI]

    Miura, Michiko (Center Moriches, NY); Gabel, Detlef (Bremen, DE)

    1990-01-01T23:59:59.000Z

    Novel compounds for treatment of brain tumors in Boron Neutron Capture Therapy are disclosed. A method for preparing the compounds as well as pharmaceutical compositions containing said compounds are also disclosed. The compounds are water soluble, non-toxic and non-labile boronated porphyrins which show significant uptake and retention in tumors.

  20. Technologies for Carbon Capture and Storage

    E-Print Network [OSTI]

    Hydrogen Program · FutureGen · Carbon Sequestration Leadership Forum (CSLF) #12;24-Jun-03 Slide 3 OfficeFutureGen Technologies for Carbon Capture and Storage and Hydrogen and Electricity Production-to-hydrogen costs must be lowered and affordable methods developed to sequester the "left behind" carbon #12;24-Jun

  1. Annual Report: Carbon Capture (30 September 2012)

    SciTech Connect (OSTI)

    Luebke, David; Morreale, Bryan; Richards, George; Syamlal, Madhava

    2014-04-16T23:59:59.000Z

    Capture of carbon dioxide (CO{sub 2}) is a critical component in reducing greenhouse gas emissions from fossil fuel-based processes. The Carbon Capture research to be performed is aimed at accelerating the development of efficient, cost-effective technologies which meet the post-combustion programmatic goal of capture of 90% of the CO{sub 2} produced from an existing coal-fired power plant with less than a 35% increase in the cost of electricity (COE), and the pre-combustion goal of 90% CO{sub 2} capture with less than a 10% increase in COE. The specific objective of this work is to develop innovative materials and approaches for the economic and efficient capture of CO{sub 2} from coal-based processes, and ultimately assess the performance of promising technologies at conditions representative of field application (i.e., slip stream evaluation). The Carbon Capture research includes seven core technical research areas: post-combustion solvents, sorbents, and membranes; pre-combustion solvents, sorbents, and membranes; and oxygen (O{sub 2}) production. The goal of each of these tasks is to develop advanced materials and processes that are able to reduce the energy penalty and cost of CO{sub 2} (or O{sub 2}) separation over conventional technologies. In the first year of development, materials will be examined by molecular modeling, and then synthesized and experimentally characterized at lab scale. In the second year, they will be tested further under ideal conditions. In the third year, they will be tested under realistic conditions. The most promising materials will be tested at the National Carbon Capture Center (NCCC) using actual flue or fuel gas. Systems analyses will be used to determine whether or not materials developed are likely to meet the Department of Energy (DOE) COE targets. Materials which perform well and appear likely to improve in performance will be licensed for further development outside of the National Energy Technology Laboratory (NETL), Office of Research and Development (ORD).

  2. Hydrogen Fueling - Coming Soon to a Station Near You (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2009-04-01T23:59:59.000Z

    Fact sheet providing information useful to local permitting officials facing hydrogen fueling station proposals.

  3. Station Processing for a Low Frequency Array in WA

    E-Print Network [OSTI]

    Ellingson, Steven W.

    for the remote station, minus 2 kW for cooling (considered "infrastructure"). #12;Station Processing Requirements stations (regardless of role as remote or core) (yes; remote stations can be "less" not "different") 2 (yes: 2-3 for core, 1 for remote) 6. Cost: TBD. (Prorated cost of ~US$500 per dual-pol element

  4. An Assessment of the Near-Term Costs of Hydrogen Refueling Stations and Station Components

    E-Print Network [OSTI]

    Weinert, Jonathan X.; Lipman, Timothy

    2006-01-01T23:59:59.000Z

    station. H2Gen’s estimates for capital costs are also lowerestimates and show high variability (26%-117% of capital costs).capital costs of about $250,000. Existing hydrogen station cost analyses tend to under-estimate

  5. The Normal/Bloomington Amtrak passenger station

    SciTech Connect (OSTI)

    Francis, C.E. [Illinois State Univ., Normal, IL (United States)

    1995-11-01T23:59:59.000Z

    The new Normal/Bloomington, Illinois Amtrak railroad passenger station was completed in 1990. A number of energy conservation technologies have been combined to provide for efficient railroad operations, passenger comfort, and a pleasing atmosphere. Passive solar heating, shading, and the building`s thermal efficiency have substantially reduced the amount of energy required for space conditions. The use of daylighting high efficiency fluorescent and high pressure sodium lighting as well as electronic load management have reduced energy requirements for lighting more than 70%. A stand-alone PV system provides energy for a portion of the building`s electrical requirement. An average monthly output of 147 kWh accounts for approximately 7.5% of the total electrical load. Overall, this station requires less than 25% of the energy required by a recently built `typical` station of similar size in a similar climate.

  6. Hydrogen fueling station development and demonstration

    SciTech Connect (OSTI)

    Edeskuty, F.J.; Daney, D.; Daugherty, M.; Hill, D.; Prenger, F.C.

    1996-09-01T23:59:59.000Z

    This is the final report of a one-year, Laboratory-Directed Research and Development (LDRD) project at the Los Alamos National Laboratory (LANL). This project sought to develop and demonstrate a hydrogen fueling station for vehicles. Such stations are an essential infrastructural element in the practical application of hydrogen as vehicle fuel, and a number of issues such as safety, efficiency, design, and operating procedures can only be accurately addressed by a practical demonstration. Regardless of whether the vehicle is powered by an internal combustion engine or fuel cell, or whether the vehicle has a liquid or gaseous fuel tank, the fueling station is a critical technology that is the link between the local storage facility and the vehicle.

  7. Economic Analysis of Hydrogen Energy Station Concepts: Are "H 2E-Stations" a Key Link to a Hydrogen Fuel Cell Vehicle Infrastructure?

    E-Print Network [OSTI]

    Lipman, Timothy E.; Edwards, Jennifer L.; Kammen, Daniel M.

    2002-01-01T23:59:59.000Z

    in the analysis of hydrogen energy stations, additionalattractiveness of the hydrogen energy station scheme in bothECONOMIC ANALYSIS OF HYDROGEN ENERGY STATION CONCEPTS: ARE '

  8. Pump station for radioactive waste water

    DOE Patents [OSTI]

    Whitton, John P.; Klos, Dean M.; Carrara, Danny T.; Minno, John J.

    2003-11-18T23:59:59.000Z

    A pump station for transferring radioactive particle containing waste water, includes: (a.) an enclosed sump having a vertically elongated right frusto conical wall surface and a bottom surface and (b.) a submersible volute centrifugal pump having a horizontally rotating impeller and a volute exterior surface. The sump interior surface, the bottom surface and the volute exterior surface are made of stainless steel having a 30 Ra or finer surface finish. A 15 Ra finish has been found to be most cost effective. The pump station is used for transferring waste water, without accumulation of radioactive fines.

  9. Design of a photovoltaic central power station

    SciTech Connect (OSTI)

    Not Available

    1984-02-01T23:59:59.000Z

    Photovoltaic central power station designs have been developed for both high-efficiency flat-panel arrays and two-axis tracking concentrator arrays. Both designs are based on a site adjacent to the Saguaro Power Station of Arizona Public Service. The plants are 100 MW each, made of 5 MW subfields. The site specific designs allow detailed cost estimate for site preparation, installation, and engineering. These designs are summarized and cost estimates analyzed. Provided also are recommendations for future work to reduce system cost for each plant design.

  10. Accessing Heritage Documents according to Space Criteria within Digital Libraries

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    1 Accessing Heritage Documents according to Space Criteria within Digital Libraries Christophe, Geographic Information Retrieval and Visualization, Non-Structured Documents, Digital Libraries, Cultural on digital libraries and proposes to extend the basic services of existing Library Management System with new

  11. Layered solid sorbents for carbon dioxide capture

    SciTech Connect (OSTI)

    Li, Bingyun; Jiang, Bingbing; Gray, McMahan L; Fauth, Daniel J; Pennline, Henry W; Richards, George A

    2014-11-18T23:59:59.000Z

    A solid sorbent for the capture and the transport of carbon dioxide gas is provided having at least one first layer of a positively charged material that is polyethylenimine or poly(allylamine hydrochloride), that captures at least a portion of the gas, and at least one second layer of a negatively charged material that is polystyrenesulfonate or poly(acryclic acid), that transports the gas, wherein the second layer of material is in juxtaposition to, attached to, or crosslinked with the first layer for forming at least one bilayer, and a solid substrate support having a porous surface, wherein one or more of the bilayers is/are deposited on the surface of and/or within the solid substrate. A method of preparing and using the solid sorbent is provided.

  12. Electron capture cross sections for stellar nucleosynthesis

    E-Print Network [OSTI]

    Giannaka, P G

    2015-01-01T23:59:59.000Z

    In the first stage of this work, we perform detailed calculations for the cross sections of the electron capture on nuclei under laboratory conditions. Towards this aim we exploit the advantages of a refined version of the proton-neutron quasi-particle random-phase approximation (pn-QRPA) and carry out state-by-state evaluations of the rates of exclusive processes that lead to any of the accessible transitions within the chosen model space. In the second stage of our present study, we translate the above mentioned $e^-$-capture cross sections to the stellar environment ones by inserting the temperature dependence through a Maxwell-Boltzmann distribution describing the stellar electron gas. As a concrete nuclear target we use the $^{66}Zn$ isotope, which belongs to the iron group nuclei and plays prominent role in stellar nucleosynthesis at core collapse supernovae environment.

  13. Data Capture Technique for High Speed Signaling

    DOE Patents [OSTI]

    Barrett, Wayne Melvin (Rochester, MN); Chen, Dong (Croton On Hudson, NY); Coteus, Paul William (Yorktwon Heights, NY); Gara, Alan Gene (Mount Kisco, NY); Jackson, Rory (Eastchester, NY); Kopcsay, Gerard Vincent (Yorktown Hieghts, NY); Nathanson, Ben Jesse (Teaneck, NY); Vranas, Paylos Michael (Bedford Hills, NY); Takken, Todd E. (Brewster, NY)

    2008-08-26T23:59:59.000Z

    A data capture technique for high speed signaling to allow for optimal sampling of an asynchronous data stream. This technique allows for extremely high data rates and does not require that a clock be sent with the data as is done in source synchronous systems. The present invention also provides a hardware mechanism for automatically adjusting transmission delays for optimal two-bit simultaneous bi-directional (SiBiDi) signaling.

  14. Simteche Hydrate CO2 Capture Process

    SciTech Connect (OSTI)

    Nexant and Los Alamos National Laboratory

    2006-09-30T23:59:59.000Z

    As a result of an August 4, 2005 project review meeting held at Los Alamos National Laboratory (LANL) to assess the project's technical progress, Nexant/Simteche/LANL project team was asked to meet four targets related to the existing project efforts. The four targets were to be accomplished by the September 30, 2006. These four targets were: (1) The CO{sub 2} hydrate process needs to show, through engineering and sensitivity analysis, that it can achieve 90% CO{sub 2} capture from the treated syngas stream, operating at 1000 psia. The cost should indicate the potential of achieving the Sequestration Program's cost target of less than 10% increase in the cost of electricity (COE) of the non-CO{sub 2} removal IGCC plant or demonstrate a significant cost reduction from the Selexol process cost developed in the Phase II engineering analysis. (2) The ability to meet the 20% cost share requirement for research level efforts. (3) LANL identifies through equilibrium and bench scale testing a once-through 90% CO{sub 2} capture promoter that supports the potential to achieve the Sequestration Program's cost target. Nexant is to perform an engineering analysis case to verify any economic benefits, as needed; no ETM validation is required, however, for this promoter for FY06. (4) The CO{sub 2} hydrate once-through process is to be validated at 1000 psia with the ETM at a CO{sub 2} capture rate of 60% without H{sub 2}S. The performance of 68% rate of capture is based on a batch, equilibrium data with H{sub 2}S. Validation of the test results is required through multiple runs and engineering calculations. Operational issues will be solved that will specifically effect the validation of the technology. Nexant was given the primary responsibility for Target No.1, while Simteche was mainly responsible for Target No.2; with LANL having the responsibility of Targets No.3 and No.4.

  15. Eddington Capture Sphere around luminous stars

    E-Print Network [OSTI]

    Adam Stahl; Maciek Wielgus; Marek Abramowicz; W?odek Klu?niak; Wenfei Yu

    2012-08-10T23:59:59.000Z

    Test particles infalling from infinity onto a compact spherical star with a mildly super-Eddington luminosity at its surface are typically trapped on the "Eddington Capture Sphere" and do not reach the surface of the star. The presence of a sphere on which radiation pressure balances gravity for static particles was first discovered some twenty five years ago. Subsequently, it was shown to be a capture sphere for particles in radial motion, and more recently also for particles in non-radial motion, in which the Poynting-Robertson radiation drag efficiently removes the orbital angular momentum of the particles, reducing it to zero. Here we develop this idea further, showing that "levitation" on the Eddington sphere (above the stellar surface) is a state of stable equilibrium, and discuss its implications for Hoyle-Lyttleton accretion onto a luminous star. When the Eddington sphere is present, the cross-section of a compact star for actual accretion is typically less than the geometrical cross-section (pi Rsquared), direct infall onto the stellar surface only being possible for relativistic particles, with the required minimum particle velocity at infinity typically ~1/2 the speed of light. We further show that particles on typical trajectories in the vicinity of the stellar surface will also be trapped on the Eddington Capture Sphere.

  16. First Calorimetric Measurement of OI-line in the Electron Capture Spectrum of $^{163}$Ho

    E-Print Network [OSTI]

    P. C. -O. Ranitzsch; C. Hassel; M. Wegner; S. Kempf; A. Fleischmann; C. Enss; L. Gastaldo; A. Herlert; K. Johnston

    2014-08-30T23:59:59.000Z

    The isotope $^{163}$Ho undergoes an electron capture process with a recommended value for the energy available to the decay, $Q_{\\rm EC}$, of about 2.5 keV. According to the present knowledge, this is the lowest $Q_{\\rm EC}$ value for electron capture processes. Because of that, $^{163}$Ho is the best candidate to perform experiments to investigate the value of the electron neutrino mass based on the analysis of the calorimetrically measured spectrum. We present for the first time the calorimetric measurement of the atomic de-excitation of the $^{163}$Dy daughter atom upon the capture of an electron from the 5s shell in $^{163}$Ho, OI-line. The measured peak energy is 48 eV. This measurement was performed using low temperature metallic magnetic calorimeters with the $^{163}$Ho ion implanted in the absorber. We demonstrate that the calorimetric spectrum of $^{163}$Ho can be measured with high precision and that the parameters describing the spectrum can be learned from the analysis of the data. Finally, we discuss the implications of this result for the Electron Capture $^{163}$Ho experiment, ECHo, aiming to reach sub-eV sensitivity on the electron neutrino mass by a high precision and high statistics calorimetric measurement of the $^{163}$Ho spectrum.

  17. Parametric study of solid amine sorbents for the capture of carbon dioxide

    SciTech Connect (OSTI)

    M.L. Gray; J.S. Hoffman; D.C. Hreha; D.J. Fauth; S.W. Hedges; K.J. Champagne; H.W. Pennline [United States Department of Energy, Pittsburgh, PA (United States). National Energy Technology Laboratory

    2009-09-15T23:59:59.000Z

    Solid amine sorbents were prepared using mixtures of linear and branched primary, secondary, and tertiary amines. These amines were immobilized within polystyrene (PS)-, silicon dioxide (SiO{sub 2})-, or polymethylmethacrylate (PMMA)-based substrates at various weight ratios. Testing was conducted in various reactor systems, where the reactive water required for the capture of carbon dioxide (CO{sub 2}) was tracked during the adsorption/desorption cycles by mass spectrometer gas analysis. The water management for these sorbents was quantified and used to assess the technical feasibility of the operating conditions for the capture of CO{sub 2} from simulated flue gas streams. In addition, the heats of reaction and performance capture loading capacities of these sorbents were also determined by differential scanning calorimetry (DSC) and thermogravimetric analyses (TGAs), respectively, in both dry and humidified CO{sub 2} gas streams. The regenerable solid amine sorbents investigated in this study exhibit acceptable CO{sub 2}-capture loading capacities of 2.5-3.5 mol of CO{sub 2}/kg of sorbent by TGA and a laboratory-scale fixed-bed reactor. These sorbents were stable over the adsorption/desorption temperature range of 25-105{sup o}C for 10 cyclic tests. According to the DSC analysis, the heat of reaction generated by these sorbents was in the range of 400-600 Btu/lb. CO{sub 2}, which will require a reactor with heat management capabilities. 6 refs., 4 figs., 3 tabs.

  18. Texas Fever: Experiments Made by the Texas Agricultural Experiment Station, in Co-operation with the Missouri Experiment Station and the Missouri State Board of Agriculture, in Immunizing Northern Breeding Cattle Against Texas Fever.

    E-Print Network [OSTI]

    Connaway, J. W.; Francis, M. (Mark)

    1899-01-01T23:59:59.000Z

    of preventing these 1ocssc.s h.rs led the Experiment Stations of lfissouri and Teras and the Missouri State Board of Agriculture to undertake the experimelits re- ported herein. This co-operative work was begun in 1896, and is still in prog- ress... Station before shipping, and three after their arrival in Missis- sippi. These cattle varied In age from 1 1-2 years to 11 years. They were inoculated daily with serum in doses of 40 to 60 cc., according to size of animal. The minin~um quqntity injected...

  19. Capturing the Sun, Creating a Clean Energy Future (Brochure)...

    Broader source: Energy.gov (indexed) [DOE]

    Capturing the Sun, Creating a Clean Energy Future (Brochure), SunShot, Solar Energy Technologies Program (SETP), U.S. Department of Energy (DOE) Capturing the Sun, Creating a Clean...

  20. New Funding Boosts Carbon Capture, Solar Energy and High Gas...

    Office of Environmental Management (EM)

    Boosts Carbon Capture, Solar Energy and High Gas Mileage Cars and Trucks New Funding Boosts Carbon Capture, Solar Energy and High Gas Mileage Cars and Trucks June 11, 2009 -...

  1. Carbon Capture Innovation: Making an IMPACCT on Coal | Department...

    Energy Savers [EERE]

    Carbon Capture Innovation: Making an IMPACCT on Coal Carbon Capture Innovation: Making an IMPACCT on Coal February 16, 2012 - 4:48pm Addthis The ICES team from Alliant Techsystems...

  2. Carbon Dioxide Capture/Sequestration Tax Deduction (Kansas)

    Broader source: Energy.gov [DOE]

    Carbon Dioxide Capture/Sequestration Tax Deduction allows a taxpayer a deduction to adjusted gross income with respect to the amortization of the amortizable costs of carbon dioxide capture,...

  3. Readout of Secretary Chu Meetings on Carbon Capture and Sequestration...

    Office of Environmental Management (EM)

    Chu Meetings on Carbon Capture and Sequestration and State Grid Readout of Secretary Chu Meetings on Carbon Capture and Sequestration and State Grid July 16, 2009 - 12:00am Addthis...

  4. Gamma Spectrum from Neutron Capture on Tungsten Isotopes

    E-Print Network [OSTI]

    Hurst, Aaron

    2011-01-01T23:59:59.000Z

    FROM NEUTRON CAPTURE ON TUNGSTEN ISOTOPES A. M. HURST ?1,2 ,capture on the stable tungsten isotopes is presented, withknown decay schemes of the tungsten isotopes from neutron

  5. solvent-carbon-capture-scientific | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Development of a Novel Gas Pressurized Stripping Process-Based Technology for CO2 Capture Project No.: DE-FE0007567 Carbon Capture Scientific is developing and testing a novel,...

  6. Perspectives on Carbon Capture and Sequestration in the United States

    E-Print Network [OSTI]

    Wong-Parodi, Gabrielle

    2011-01-01T23:59:59.000Z

    are capturing CO 2 emissions from a coal power plant you aresources of emissions, e.g. coal-fired power plants or cementemissions are captured from stationary sources such as coal-fired power

  7. CO2 Capture by Absorption with Potassium Carbonate

    E-Print Network [OSTI]

    Rochelle, Gary T.

    CO2 Capture by Absorption with Potassium Carbonate First Quarterly Report 2007 Quarterly Progress of this work is to improve the process for CO2 capture by alkanolamine absorption/stripping by developing

  8. CO2 Capture by Absorption with Potassium Carbonate

    E-Print Network [OSTI]

    Rochelle, Gary T.

    CO2 Capture by Absorption with Potassium Carbonate Fourth Quarterly Report 2006 Quarterly Progress of this work is to improve the process for CO2 capture by alkanolamine absorption/stripping by developing

  9. Tethered nuclear power for the Space Station

    SciTech Connect (OSTI)

    Bents, D.J.

    1985-01-01T23:59:59.000Z

    A nuclear space power system the SP-100 is being developed for future missions where large amounts of electrical power will be required. Although it is primarily intended for unmanned spacecraft, it can be adapted to a manned space platform by tethering it above the station through an electrical transmission line which isolates the reactor far away from the inhabited platform and conveys its power back to where it is needed. The transmission line, used in conjunction with an instrument rate shield, attenuates reactor radiation in the vicinity of the space station to less than one-one hundredth of the natural background which is already there. This combination of shielding and distance attenuation is less than one-tenth the mass of boom-mounted or onboard man-rated shields that are required when the reactor is mounted nearby. This paper describes how connection is made to the platform (configuration, operational requirements) and introduces a new element the coaxial transmission tube which enables efficient transmission of electrical power through long tethers in space. Design methodology for transmission tubes and tube arrays is discussed. An example conceptual design is presented that shows SP-100 at three power levels 100 kWe, 300 kWe, and 1000 kWe connected to space station via a 2 km HVDC transmission line/tether. Power system performance, mass, and radiation hazard are estimated with impacts on space station architecture and operation.

  10. City of College Station's Thermographic Mobile Scan

    E-Print Network [OSTI]

    Shear, C. K.

    1986-01-01T23:59:59.000Z

    During the first quarter of 1986, the City of College Station conducted a thermographic mobile scan of the entire city. A thermographic mobile scan is a process by which heat loss/heat gain data is accumulated by a vehicle traveling the city...

  11. TechnicalDesign Report, Second Target Station

    SciTech Connect (OSTI)

    Galambos, John D [ORNL; Anderson, David E [ORNL; Bechtol, D [HDR, Inc.; Bethea, Katie L [ORNL; Brown, N [Barge Waggoner Sumner & Cannon, Inc.; Carden, W. F. [Oak Ridge National Laboratory (ORNL); Chae, Steven M [ORNL; Clark, A. [Barge Waggoner Sumner & Cannon, Inc.; Counce, Deborah M [ORNL; Craft, K [Barge Waggoner Sumner & Cannon, Inc.; Crofford, Mark T [ORNL; Collins, Richard M [ORNL; Cousineau, Sarah M [ORNL; Curry, Douglas E [ORNL; Cutler, Roy I [ORNL; Dayton, Michael J [ORNL; Dean, Robert A [ORNL; Deibele, Craig E [ORNL; Doleans, Marc [ORNL; Dye, T. [HDR, Inc.; Eason, Bob H [ORNL; Eckroth, James A [ORNL; Fincrock, C [HDR, Inc.; Fritts, S. [Barge Waggoner Sumner & Cannon, Inc.; Gallmeier, Franz X [ORNL; Gawne, Ken R [ORNL; Hartman, Steven M [ORNL; Herwig, Kenneth W [ORNL; Hess, S. [HDR, Inc.; Holmes, Jeffrey A [ORNL; Horak, Charlie M [ORNL; Howell, Matthew P [ORNL; Iverson, Erik B [ORNL; Jacobs, Lorelei L [ORNL; Jones, Larry C [ORNL; Johnson, B. [HDR, Inc.; Johnson, S. [HDR, Inc.; Kasemir, Kay [ORNL; Kim, Sang-Ho [ORNL; Laughon, Gregory J [ORNL; Lu, W. [Oak Ridge National Laboratory (ORNL); Mahoney, Kelly L [ORNL; Mammosser, John [ORNL; McManamy, T. [McManamy Consulting, Inc.; Michilini, M. [HDR, Inc.; Middendorf, Mark E [ORNL; O'Neal, Ed [Oak Ridge National Laboratory (ORNL); Nemec, B. [Barge Waggoner Sumner & Cannon, Inc.; Peters, Roy Cecil [ORNL; Plum, Michael A [ORNL; Reagan, G. [Barge Waggoner Sumner & Cannon, Inc.; Remec, Igor [ORNL; Rennich, Mark J [ORNL; Riemer, Bernie [ORNL; Saethre, Robert B [ORNL; Schubert, James Phillip [ORNL; Shishlo, Andrei P [ORNL; Smith, C Craig [ORNL; Strong, William Herb [ORNL; Tallant, Kathie M [ORNL; Tennant, David Alan [ORNL; Thibadeau, Barbara M [ORNL; Trumble, S. [HDR, Inc.; Trotter, Steven M [ORNL; Wang, Z. [Institute of Modern Physics (IMP), Chinese Academy of Sciences; Webb, Steven B [ORNL; Williams, Derrick C [ORNL; White, Karen S [ORNL; Zhao, Jinkui [ORNL

    2015-01-01T23:59:59.000Z

    The Second Target Station (STS) is a proposed upgrade for SNS. It includes a doubling of the accelerator power and an additional instrument hall. The new instrument hall will recieve a 467 kW 10 Hz beam. The parameters and preliminary design aspects of the STS are presented for the accelerator, target systems, instrument hall, instruments and civil construction aspects.

  12. Michigan State University Agricultural Experiment Station

    E-Print Network [OSTI]

    Douches, David S.

    Michigan State University Agricultural Experiment Station In Cooperation with the Michigan Potato Industry Commission Michigan Potato Research Report 2005 Volume 37 #12;Funding: Fed. Grant/MPIC 2005 POTATO. Hammerschmidt and W. Kirk Departments of Crop and Soil Sciences and Plant Pathology Michigan State University

  13. MICHIGAN STATE UNIVERSITY AGRICULTURAL EXPERIMENT STATION

    E-Print Network [OSTI]

    Douches, David S.

    MICHIGAN STATE UNIVERSITY AGRICULTURAL EXPERIMENT STATION IN COOPERATION WITH THE MICHIGAN POTATO INDUSTRY COMMISSION 2004 Michigan Potato Research Report Volume 36 Left to Right: Ben Kudwa, MPIC; Caryn of Crop and Soil Sciences Michigan State University East Lansing, MI 48824 Cooperators: R.W. Chase, Ray

  14. MICHIGAN STATE UNIVERSITY AGRICULTURAL EXPERIMENT STATION

    E-Print Network [OSTI]

    Douches, David S.

    MICHIGAN STATE UNIVERSITY AGRICULTURAL EXPERIMENT STATION IN COOPERATION WITH THE MICHIGAN POTATO INDUSTRY COMMISSION MICHIGAN POTATO RESEARCH REPORT 2003 Volume 35 Click Here to Open the 2003 Potato Sciences and Plant Pathology Michigan State University East Lansing, MI 48824 INTRODUCTION Each year we

  15. Michigan State University Agricultural Experiment Station

    E-Print Network [OSTI]

    Douches, David S.

    Michigan State University Agricultural Experiment Station In Cooperation with the Michigan Potato Industry Commission Michigan Potato Research Report 2005 Volume 37 #12;2005 POTATO BREEDING AND GENETICS Department of Crop and Soil Sciences Michigan State University East Lansing, MI 48824 Cooperators: R.W. Chase

  16. MICHIGAN STATE UNIVERSITY AGRICULTURAL EXPERIMENT STATION

    E-Print Network [OSTI]

    Douches, David S.

    MICHIGAN STATE UNIVERSITY AGRICULTURAL EXPERIMENT STATION IN COOPERATION WITH THE MICHIGAN POTATO INDUSTRY COMMISSION MICHIGAN POTATO RESEARCH REPORT 2003 Volume 35 Click Here to Open the 2003 Potato, S. Cooper, L. Frank, J. Driscoll, and E. Estelle Department of Crop and Soil Sciences Michigan State

  17. MICHIGAN STATE UNIVERSITY AGRICULTURAL EXPERIMENT STATION

    E-Print Network [OSTI]

    Douches, David S.

    MICHIGAN STATE UNIVERSITY AGRICULTURAL EXPERIMENT STATION IN COOPERATION WITH THE MICHIGAN POTATO INDUSTRY COMMISSION 2004 Michigan Potato Research Report Volume 36 Left to Right: Ben Kudwa, MPIC; Caryn and W. Kirk Departments of Crop and Soil Sciences and Plant Pathology Michigan State University East

  18. TARGET STATION INFRASTRUCTURE THE CNGS EXPERIENCE

    E-Print Network [OSTI]

    McDonald, Kirk

    of Aluminum Water cooled Current: 150kA (horn) ­ 180 kA (reflector) Pulse duration 7ms #12;Key elements Remote handling Remote station for radiation survey in the target chamber #12;CNGS Target Area I per cooling circuit 2007 run radiation effects on ventilation system electronics broken flexible stripline

  19. TEST STATION SALE OF PERFORMANCE TESTED BULLS

    E-Print Network [OSTI]

    Tennessee, University of

    in the test had to meet minimum performance requirements. Those were: CREEP NON-CREEP Adj 205 day wt. 560 520AS-B428 U T BULL TEST STATION SALE OF PERFORMANCE TESTED BULLS THURSDAY, MARCH 8, 2012 12:00 NOON IN GREENEVILLE AND KNOXVILLE LIVESTOCK CENTER http://animalscience.ag.utk.edu/ (For video) #12;UT BULL TEST

  20. Recent developments in HVDC convertor station design

    SciTech Connect (OSTI)

    Carlsson, L.

    1984-08-01T23:59:59.000Z

    New requirements on HVDC convertor station performance have emerged during the past few years. The paper presents some of these requirements and shows how they have been met through equipment and system development. This development will result in a new generation of HVDC transmissions with still better performance than for the projects presently in operation.

  1. Capturing Video Using the SONY GV-HD700 Cassette Deck In the AV Production Room (Room 261), Mann Library has a SONY GV-HD700 Digital HD Video

    E-Print Network [OSTI]

    Angenent, Lars T.

    Library has a SONY GV-HD700 Digital HD Video Cassette Deck. It is attached to the left side Mac Pro Creation Station, and can be used to "capture", or convert video from miniDV tapes to digital files. 1

  2. Post-Combustion CO2 Capture 11 -13 July 2010

    E-Print Network [OSTI]

    Post-Combustion CO2 Capture Workshop 11 - 13 July 2010 Tufts European Center Talloires, France Institute | | Clean Air Task Force | | Asia Clean Energy Innovation Initiative | #12;Post-Combustion CO2 Capture Workshop 11 - 13 July 2010 Talloires, France PROCEEDINGS: Post-Combustion CO2 Capture Workshop

  3. Pilot Plant Study of Carbon Dioxide Capture by Aqueous Monoethanolamine

    E-Print Network [OSTI]

    Rochelle, Gary T.

    i Pilot Plant Study of Carbon Dioxide Capture by Aqueous Monoethanolamine Topical Report Prepared Pilot Plant Study of Carbon Dioxide Capture by Aqueous Monoethanolamine Ross Edward Dugas, M capture using monoethanolamine (MEA). MEA is an appropriate choice for a baseline study since

  4. Carbon Dioxide Capture by Chemical Absorption: A Solvent Comparison Study

    E-Print Network [OSTI]

    1 Carbon Dioxide Capture by Chemical Absorption: A Solvent Comparison Study by Anusha Kothandaraman Students #12;2 #12;3 Carbon Dioxide Capture by Chemical Absorption: A Solvent Comparison Study by Anusha with electricity generation accounting for 40% of the total1 . Carbon capture and sequestration (CCS) is one

  5. Designed amyloid fibers as materials for selective carbon dioxide capture

    E-Print Network [OSTI]

    Designed amyloid fibers as materials for selective carbon dioxide capture Dan Lia,b,c,1 , Hiroyasu demonstrate that amyloids, self-assembling protein fibers, are effective for selective carbon dioxide capture formation rate is fast enough to capture carbon dioxide by dynamic separation, undiminished by the presence

  6. Electrochemically Mediated Separation for Carbon Capture Michael C. Sterna

    E-Print Network [OSTI]

    . ___________________________________________________________________________________ Abstract Carbon capture technology has been proposed as an effective approach for the mitigation to an environmentally responsible economy [4]. Carbon capture and storage (CCS) technology has been proposed1 Electrochemically Mediated Separation for Carbon Capture Michael C. Sterna , Fritz Simeona

  7. Incorporating Carbon Capture and Storage Technologies in Integrated Assessment Models

    E-Print Network [OSTI]

    Incorporating Carbon Capture and Storage Technologies in Integrated Assessment Models J. R. Mc carbon capture and storage, 2) a natural gas combined cycle technology with carbon capture and storage 1 emissions growth. Both the magnitude and rate of technological change toward low- or no-carbon emitting

  8. Economic Modeling of Carbon Capture and Sequestration Technologies

    E-Print Network [OSTI]

    Economic Modeling of Carbon Capture and Sequestration Technologies Jim McFarland (jrm1@mit.edu; +1 explores the economics of carbon capture and sequestration technologies as applied to electric generating of the world economy, is used to model two of the most promising carbon capture and sequestration (CCS

  9. Capture-ready power plants : options, technologies and economics

    E-Print Network [OSTI]

    Bohm, Mark (Mark C.)

    2006-01-01T23:59:59.000Z

    A plant can be considered to be capture-ready if, at some point in the future it can be retrofitted for carbon capture and sequestration and still be economical to operate. The concept of capture-ready is not a specific ...

  10. An Assessment of the Near-Term Costs of Hydrogen Refueling Stations and Station Components

    E-Print Network [OSTI]

    Lipman, T E; Weinert, Jonathan X.

    2006-01-01T23:59:59.000Z

    Installed Capital Figure 4-21: Cost Estimates for 1,000 kg/station. H2Gen’s estimates for capital costs are also lowerestimates and show high variability (26%-117% of capital costs).

  11. Aquatic impacts from operation of three midwestern nuclear power stations: Cooper Nuclear Station environmental appraisal report

    SciTech Connect (OSTI)

    Brice, J.R.

    1981-10-01T23:59:59.000Z

    Cooper Nuclear Station is located on the Nebraska side of the Missouri River in Nemaha County. The station utilizes a boiling water reactor and steam turbine generator to produce 778 MW (net) of electrical power. The cooling system is a once-through design that withdraws water from, and discharges to, the Missouri River. No significant adverse impacts to the biota of the Missouri River from the Cooper Nuclear Station discharge were detected. Localized effects in the vicinity of the discharge have been observed. These include changes in the diversity and productivity of phytoplankton, periphyton, and benthic invertebrates at certain times of the year. The station appears to entrain large numbers of catostomid larvae, but this loss is not reflected in the available commercial fisheries statistics. Large numbers of gizzard shad and freshwater drum are impinged annually by Cooper Nuclear Station, but neither of these species seem to be adversely affected. Bigmouth buffalo populations could potentially suffer losses, but as was the case with the other catostomids, commercial catches of bigmouth buffalo did not seem to be affected by station operation.

  12. A Framework for Environmental Assessment of CO2 Capture and Storage Systems

    E-Print Network [OSTI]

    Sathre, Roger

    2013-01-01T23:59:59.000Z

    Aaron DS, Williams KA. Is carbon capture and storage reallyal. Comparison of carbon capture and storage with renewablefuel power plants with carbon capture and storage. Energy

  13. Calcifying Cyanobacteria - The potential of biomineralization for Carbon Capture and Storage

    E-Print Network [OSTI]

    Jansson, Christer G

    2010-01-01T23:59:59.000Z

    Herzog H, Golomb D: Carbon Capture and Storage from Fossil for point-source carbon capture and sequestration. Althoughof renewable biofuels, and carbon capture and storage (CCS).

  14. Spatially-explicit impacts of carbon capture and sequestration on water supply and demand

    E-Print Network [OSTI]

    Sathre, Roger

    2014-01-01T23:59:59.000Z

    Annual Conference on Carbon Capture and Sequestration, MayEleventh Annual Carbon Capture, Utilization & Sequestrationplants with and without carbon capture. Presentation at 2009

  15. A Framework for Environmental Assessment of CO2 Capture and Storage Systems

    E-Print Network [OSTI]

    Sathre, Roger

    2013-01-01T23:59:59.000Z

    V. The role of carbon capture technologies in greenhouse gascarbon capture and storage with renewable energy technologiesCarbon capture and storage: Fundamental thermodynamics and current technology.

  16. Recent advances in neutron capture therapy (NCT)

    SciTech Connect (OSTI)

    Fairchild, R.G.

    1985-01-01T23:59:59.000Z

    The application of the /sup 10/B(n,..cap alpha..)/sup 7/Li reaction to cancer radiotherapy (Neutron Capture therapy, or NCT) has intrigued investigators since the discovery of the neutron. This paper briefly summarizes data describing recently developed boronated compounds with evident tumor specificity and extended biological half-lives. The implication of these compounds to NCT is evaluated in terms of Therapeutic Gain (TG). The optimization of NCT using band-pass filtered beams is described, again in terms of TG, and irradiation times with these less intense beams are estimated. 24 refs., 3 figs., 3 tabs.

  17. Wyoming Carbon Capture and Storage Institute

    SciTech Connect (OSTI)

    Nealon, Teresa

    2014-06-30T23:59:59.000Z

    This report outlines the accomplishments of the Wyoming Carbon Capture and Storage (CCS) Technology Institute (WCTI), including creating a website and online course catalog, sponsoring technology transfer workshops, reaching out to interested parties via news briefs and engaging in marketing activities, i.e., advertising and participating in tradeshows. We conclude that the success of WCTI was hampered by the lack of a market. Because there were no supporting financial incentives to store carbon, the private sector had no reason to incur the extra expense of training their staff to implement carbon storage. ii

  18. Neutron Captures in the r-Process

    E-Print Network [OSTI]

    T. Rauscher

    2004-04-12T23:59:59.000Z

    The r-process involves neutron-rich nuclei far off stability for which no experimental cross sections are known. Therefore, one has to rely on theory. The difficulties in the predictions are briefly addressed. To investigate the impact of altered rates, a comparison of r-process production in hot bubble models with largely varied rates is shown. Due to the (n,gamma)-(gamma,n) equilibrium established at the onset of the r-process, only late-time neutron captures are important which mainly modify the abundances around the third r-process peak.

  19. Capture of carbon dioxide by hybrid sorption

    SciTech Connect (OSTI)

    Srinivasachar, Srivats

    2014-09-23T23:59:59.000Z

    A composition, process and system for capturing carbon dioxide from a combustion gas stream. The composition has a particulate porous support medium that has a high volume of pores, an alkaline component distributed within the pores and on the surface of the support medium, and water adsorbed on the alkaline component, wherein the proportion of water in the composition is between about 5% and about 35% by weight of the composition. The process and system contemplates contacting the sorbent and the flowing gas stream together at a temperature and for a time such that some water remains adsorbed in the alkaline component when the contact of the sorbent with the flowing gas ceases.

  20. Capturing Waste Gas: Saves Energy, Lower Costs

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page onYouTube YouTube Note: Since the YouTube platformBuilding RemovalCSS Letter -SeptemberWorkshop |Capturing Waste Gas:

  1. Carbon Capture and Storage (CCS) Studies

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page onYouTube YouTube Note: Since the YouTube platformBuilding RemovalCSS Letter -SeptemberWorkshop |Capturing WasteMultiple

  2. Sandia Energy - Carbon Capture & Storage

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's PossibleRadiation Protection245C Unlimited ReleaseWelcomeLong Lifetime of KeyCarbon Capture &

  3. How Carbon Capture Works | Department of Energy

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directed off Energy.gov.Energy02.pdf7 OPAM Flash2011-37Energy HighlightsCarbon Capture Works How

  4. Supercomputers Capture Turbulence in the Solar Wind

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of ScienceandMesa del SolStrengthening a solid ...Success Stories Touching TheCapture Turbulence in the

  5. EIS-0473: W.A. Parish Post-Combustion CO2 Capture and Sequestration Project (PCCS), Fort Bend County, TX

    Broader source: Energy.gov [DOE]

    This EIS evaluates the environmental impacts of a proposal to provide financial assistance for a project proposed by NRG Energy, Inc (NRG). DOE selected NRG’s proposed W.A. Parish Post-Combustion CO2 Capture and Sequestration Project for a financial assistance award through a competitive process under the Clean Coal Power Initiative Program. NRG would design, construct and operate a commercial-scale carbon dioxide (CO2) capture facility at its existing W.A. Parish Generating Station in Fort Bend County, Texas; deliver the CO2 via a new pipeline to the existing West Ranch oil field in Jackson County, Texas, for use in enhanced oil recovery operations; and demonstrate monitoring techniques to verify the permanence of geologic CO2 storage.

  6. Upcoming H2USA Workshop: Hydrogen Fueling Station Component Listings...

    Office of Environmental Management (EM)

    H2USA Workshop: Hydrogen Fueling Station Component Listings Upcoming H2USA Workshop: Hydrogen Fueling Station Component Listings April 21, 2015 - 1:04pm Addthis H2USA will host an...

  7. Which way is up : towards accessible wayfinding in transit stations

    E-Print Network [OSTI]

    Leven, Dalia (Dalia Beth)

    2006-01-01T23:59:59.000Z

    Passengers' most frequent interaction with a rail transit system is at its stations, which represent the beginning, the end and sometimes the middle of transit trips. The design of these stations can greatly affect a user's ...

  8. Nuclear Rocket Development Station at the Nevada Test Site |...

    Office of Environmental Management (EM)

    Rocket Development Station at the Nevada Test Site Nuclear Rocket Development Station at the Nevada Test Site During the 1950s, the United States launched a nuclear rocket program...

  9. Development of By-Pass Blending Station System

    E-Print Network [OSTI]

    Liu, M.; Barnes, D.; Bunz, K.; Rosenberry, N.

    2003-01-01T23:59:59.000Z

    A new building blending station system named by-pass blending station (BBS) has been developed to reduce building pump energy consumption in both district heating and cooling systems. Theoretical investigation demonstrated that the BBS can...

  10. Fact #816: February 10, 2014 Natural Gas Refueling Stations Grow...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    6: February 10, 2014 Natural Gas Refueling Stations Grow Over the Last Ten Years Fact 816: February 10, 2014 Natural Gas Refueling Stations Grow Over the Last Ten Years In 2003...

  11. air station project: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Dryer space Mladenoff, David 23 NOAA Pacific Marine Environmental Laboratory Ocean Climate Stations Project Environmental Sciences and Ecology Websites Summary:...

  12. Central Station DHC Phase 1 feasibility

    SciTech Connect (OSTI)

    Henderson, H.L.

    1992-03-01T23:59:59.000Z

    This project assisted a private real estate developer in technically assessing the feasibility of integrating a central DHC system into a proposed 72 acre area mixed-use Planned Development (Central Station) just south of the Chicago Central Business District (Loop). The technical assessment concluded that a district heating and cooling system for Central Station will be feasible, provided that a major anchor load can be connected to the system. The system conceived for the site employs a modular approach that adjusts production capacity to actual load growth. The design concept includes gas-fired boilers for heating, gas turbine driven chillers for base loading, electric motor driven chillers for peaking, steam turbines for peak power and back pressure operation, and chilled water storage. Energy will be supplied to the users in the form of steam or low temperature hot water for heating, and low temperature chilled water for cooling.

  13. Capturing CO2 via reactions in nanopores.

    SciTech Connect (OSTI)

    Leung, Kevin; Nenoff, Tina Maria; Criscenti, Louise Jacqueline; Tang, Z [University of Cincinnati; Dong, J. H. [University of Cincinnati

    2008-10-01T23:59:59.000Z

    This one-year exploratory LDRD aims to provide fundamental understanding of the mechanism of CO2 scrubbing platforms that will reduce green house gas emission and mitigate the effect of climate change. The project builds on the team member's expertise developed in previous LDRD projects to study the capture or preferential retention of CO2 in nanoporous membranes and on metal oxide surfaces. We apply Density Functional Theory and ab initio molecular dynamics techniques to model the binding of CO2 on MgO and CaO (100) surfaces and inside water-filled, amine group functionalized silica nanopores. The results elucidate the mechanisms of CO2 trapping and clarify some confusion in the literature. Our work identifies key future calculations that will have the greatest impact on CO2 capture technologies, and provides guidance to science-based design of platforms that can separate the green house gas CO2 from power plant exhaust or even from the atmosphere. Experimentally, we modify commercial MFI zeolite membranes and find that they preferentially transmit H2 over CO2 by a factor of 34. Since zeolite has potential catalytic capability to crack hydrocarbons into CO2 and H2, this finding paves the way for zeolite membranes that can convert biofuel into H2 and separate the products all in one step.

  14. Improving Unit Operations-Test Station Performance

    E-Print Network [OSTI]

    Filak, J. J. Jr.

    IMPROVING UNIT OPERATIONS - TEST STATION PERFORMANCE JosqIb 1. Filak. Jr, ? Corporate Energy Manager. Park.er?Hannafin COfpontioo- Cleveland. Oh ABSTRACT: This program's basic concept deals with the possibilities for reducing energy efficiency... requirements, control operation test performance functions more successfully, and retain peak load surges from reaching higher utility rate expense levels. 142 ESL-IE-95-04-23 Proceedings from the Seventeenth Industrial Energy Technology Conference...

  15. Xcel Energy Comanche Station: Pueblo, Colorado (Data)

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Stoffel, T.; Andreas, A.

    A partnership with industry and U.S. Department of Energy's National Renewable Energy Laboratory (NREL) to collect solar data to support future solar power generation in the United States. The measurement station monitors global horizontal, direct normal, and diffuse horizontal irradiance to define the amount of solar energy that hits this particular location. The solar measurement instrumentation is also accompanied by meteorological monitoring equipment to provide scientists with a complete picture of the solar power possibilities.

  16. Small SDI battle stations - More is better

    SciTech Connect (OSTI)

    Cornet, E.

    1986-09-01T23:59:59.000Z

    It is presently suggested that large numbers of lower capability SDI systems, in contrast to small numbers of large battle stations, offer better overall defense performance at lower total cost, with lower technical risk, lower sensitivity to threat scenario variability, and improved survivability. This follows from such factors as the positioning of more platforms within effective range of targets during all phases of an attack, less exacting optics requirements, mass production economies-of-scale, and improved survivability.

  17. Manuel pour installer une station sismologique OSIRIS

    E-Print Network [OSTI]

    Perrot, Julie

    installation Tout d'abord, enterrer le sismom`etre, s'assurer de l'horizontalit´e du sismo c'est-`a-dire, bulle le c^able sur le sismo, v´erifier de nouveau l'horizontalit´e. GPS Batterie ` Station d "sismo" puis cd osiris puis ./nrtd -set eth0 #12;7- Lancer Firefox (web browser) depuis la barre de menu

  18. Plug-In Electric Vehicle Handbook for Public Charging Station Hosts (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2012-04-01T23:59:59.000Z

    This handbook answers basic questions about plug-in electric vehicles, charging stations, charging equipment, and considerations for station owners, property owners, and station hosts.

  19. Competitive Charging Station Pricing for Plug-in Electric Vehicles

    E-Print Network [OSTI]

    Huang, Jianwei

    . To overcome this challenge, we develop a low-complexity algorithm that efficiently computes the pricingCompetitive Charging Station Pricing for Plug-in Electric Vehicles Wei Yuan, Member, IEEE, Jianwei considers the problem of charging station pricing and station selection of plug-in electric vehicles (PEVs

  20. "Space Station" Theme: Learning to Work, and Live, in Space

    E-Print Network [OSTI]

    Mathis, Wayne N.

    "Space Station" IMAX Film Theme: Learning to Work, and Live, in Space The educational value of NASM visit and afterward. See the "Alignment with Standards" table for details regarding how "Space Station in the "Space Station" program: · How astronauts train · What it is like to live and work in Space aboard

  1. Antenna unit and radio base station therewith

    DOE Patents [OSTI]

    Kuwahara, Mikio; Doi, Nobukazu; Suzuki, Toshiro; Ishida, Yuji; Inoue, Takashi; Niida, Sumaru

    2007-04-10T23:59:59.000Z

    Phase and amplitude deviations, which are generated, for example, by cables connecting an array antenna of a CDMA base station and the base station, are calibrated in the baseband. The base station comprises: an antenna apparatus 1; couplers 2; an RF unit 3 that converts a receive signal to a baseband signal, converts a transmit signal to a radio frequency, and performs power control; an A/D converter 4 for converting a receive signal to a digital signal; a receive beam form unit 6 that multiplies the receive signal by semi-fixed weight; a despreader 7 for this signal input; a time-space demodulator 8 for demodulating user data; a despreader 9 for probe signal; a space modulator 14 for user data; a spreader 13 for user signal; a channel combiner 12; a Tx calibrater 11 for controlling calibration of a signal; a D/A converter 10; a unit 16 for calculation of correlation matrix for generating a probe signal used for controlling an Rx calibration system and a TX calibration system; a spreader 17 for probe signal; a power control unit 18; a D/A converter 19; an RF unit 20 for probe signal; an A/D converter 21 for signal from the couplers 2; and a despreader 22.

  2. Bioenergy with Carbon Capture and Sequestration WorkshopBioenergy with Carbon Capture and Sequestration (BECCS) Workshop

    Broader source: Energy.gov [DOE]

    The Office of Fossil Energy (FE) and the Bioenergy Technologies Office (BETO) in the Office of Energy Efficiency and Renewable Energy (EERE) at the U.S. Department of Energy (DOE) is hosting a Bioenergy with Carbon Capture and Sequestration (BECCS) Workshop on Monday, May 18, 2015 in Washington, DC.

  3. The AP1000{sup R} nuclear power plant innovative features for extended station blackout mitigation

    SciTech Connect (OSTI)

    Vereb, F.; Winters, J.; Schulz, T.; Cummins, E.; Oriani, L. [Westinghouse Electric Company LLC, 1000 Westinghouse Drive, Cranberry Township, PA 16066 (United States)

    2012-07-01T23:59:59.000Z

    Station Blackout (SBO) is defined as 'a condition wherein a nuclear power plant sustains a loss of all offsite electric power system concurrent with turbine trip and unavailability of all onsite emergency alternating current (AC) power system. Station blackout does not include the loss of available AC power to buses fed by station batteries through inverters or by alternate AC sources as defined in this section, nor does it assume a concurrent single failure or design basis accident...' in accordance with Reference 1. In this paper, the innovative features of the AP1000 plant design are described with their operation in the scenario of an extended station blackout event. General operation of the passive safety systems are described as well as the unique features which allow the AP1000 plant to cope for at least 7 days during station blackout. Points of emphasis will include: - Passive safety system operation during SBO - 'Fail-safe' nature of key passive safety system valves; automatically places the valve in a conservatively safe alignment even in case of multiple failures in all power supply systems, including normal AC and battery backup - Passive Spent Fuel Pool cooling and makeup water supply during SBO - Robustness of AP1000 plant due to the location of key systems, structures and components required for Safe Shutdown - Diverse means of supplying makeup water to the Passive Containment Cooling System (PCS) and the Spent Fuel Pool (SFP) through use of an engineered, safety-related piping interface and portable equipment, as well as with permanently installed onsite ancillary equipment. (authors)

  4. New Directions: Potential Climate and Productivity Benefits from CO2 Capture in Commercial Buildings

    E-Print Network [OSTI]

    Gall, Elliott T; Nazaroff, William W

    2015-01-01T23:59:59.000Z

    Fennell, P.S. , 2014. Carbon capture and storage update.that require solutions for carbon capture from buildings to

  5. Kansas City`s Union Station redevelopment opportunity -- Environmental challenges

    SciTech Connect (OSTI)

    Snyder, M.G. [Black and Veatch Waste Science, Inc., Overland Park, KS (United States); Scott, A. [Union Station Assistance Corp., Kansas City, MO (United States)

    1995-12-31T23:59:59.000Z

    Kansas City`s Union Station, located at the center of a 1.7 million metropolitan population, is the second largest train station in the United States. The Station ceased to operate as a train station in 1983 and has since been falling into an increasing state of disrepair. This paper provides an insight into ``brownfield`` redevelopment and renovation for adaptive reuse of major turn of the century facilities such as Union Station. Substantial assessment and investigation activities have been conducted at Union Station for compliance and corrective action under RCRA, TSCA, and associated state regulations encompassing remediation estimated at more than $3 million. Recognized environmental conditions identified at Union Station included potential underground storage tanks; solid wastes, special wastes, and potentially hazardous wastes located inside the building; free liquids in sumps and elevator pits; asbestos-containing materials; lead-based paint; and potential for soil contamination on the surrounding property.

  6. Sulfur capture in an atmospheric fluidized-bed combustor

    SciTech Connect (OSTI)

    Baars, D.M.; Hunter, C.A.; Keitelman, E.N.

    1981-06-01T23:59:59.000Z

    Sulfur capture in an atmospheric fluidized-bed combustor (AFBC) both with and without recycle of fines elutriated from the bed was studied. Two empirical correlations, one by Babcock and Wilcox and the other by Westinghouse, correlate sulfur capture as a function of the calcium-to-sulfur mole ratio and gas residence time. Both correlations fit the experimental no-recycle results quite well. Of the limestones tested with no recycle, Vulcan Materials exhibits the best sulfur-capture performance. Data collected with Reed limestone indicates that recycle improves sulfur-capture compared with once-through performance. However, there is a decreasing effect on sulfur capture as the recycle rate is increased to large values. At 90% sulfur capture, the fractional reduction of fresh limestone feed attributable to recycle is 24 to 35% over a gas-residence time range of 0.7 to 0.4 s.

  7. Catalyst Additives to Enhance Mercury Oxidation and Capture

    SciTech Connect (OSTI)

    Thomas K. Gale

    2006-06-30T23:59:59.000Z

    Catalysis is the key fundamental ingredient to convert elemental mercury in coal-fired power stations into its oxidized forms that are more easily captured by sorbents, ESPs, baghouses, and wet scrubbers, whether the catalyst be unburned carbon (UBC) in the ash or vanadium pentoxide in SCR catalysts. This project has investigated several different types of catalysts that enhance mercury oxidation in several different ways. The stated objective of this project in the Statement of Objectives included testing duct-injection catalysts, catalyst-sorbent hybrids, and coated low-pressure-drop screens. Several different types of catalysts were considered for duct injection, including different forms of iron and carbon. Duct-injection catalysts would have to be inexpensive catalysts, as they would not be recycled. Iron and calcium had been shown to catalyze mercury oxidation in published bench-scale tests. However, as determined from results of an on-going EPRI/EPA project at Southern Research, while iron and calcium did catalyze mercury oxidation, the activity of these catalysts was orders of magnitude below that of carbon and had little impact in the short residence times available for duct-injected catalysts or catalyst-sorbent hybrids. In fact, the only catalyst found to be effective enough for duct injection was carbon, which is also used to capture mercury and remove it from the flue gas. It was discovered that carbon itself is an effective catalyst-sorbent hybrid. Bench-scale carbon-catalyst tests were conducted, to obtain kinetic rates of mercury adsorption (a key step in the catalytic oxidation of mercury by carbon) for different forms of carbon. All carbon types investigated behaved in a similar manner with respect to mercury sorption, including the effect of temperature and chlorine concentration. Activated carbon was more effective at adsorbing mercury than carbon black and unburned carbon (UBC), because their internal surface area of activated carbon was greater. Catalyst coating of low-pressure-drop screens was of particular interest as this project was being developed. However, it was discovered that URS was already heavily involved in the pursuit of this same technology, being funded by DOE, and reporting significant success. Hence, testing of SCR catalysts became a major focus of the project. Three different commercial SCR catalysts were examined for their ability to oxidize mercury in simulated flue-gas. Similar performance was observed from each of the three commercial catalysts, both in terms of mercury oxidation and SO{sub 3} generation. Ammonia injection hindered mercury oxidation at low HCl concentrations (i.e., {approx}2 ppmv), yet had little impact on mercury oxidation at higher HCl concentrations. On the other hand, SO{sub 2} oxidation was significantly reduced by the presence of ammonia at both low and high concentrations of HCl.

  8. Astrophysical S factors for radiative proton capture by {sup 3}H and {sup 7}Li nuclei

    SciTech Connect (OSTI)

    Dubovichenko, S. B., E-mail: dubovichenko@gmail.com [Fessenkov Astrophysical Institute, NC SRT NSA RK (Kazakhstan)

    2011-03-15T23:59:59.000Z

    Within the potential cluster model where orbital states are classified according to Young diagrams and isospin, astrophysical S factors are considered for radiative proton capture by {sup 3}H and {sup 7}Li nuclei at energies of up to 1 and 10 keV, respectively. It is shown that the approach used, which takes into account only the E1 transition for the p{sup 3}H capture process, makes it possible to describe well the most recent experimental data at c.m. energies in the range from 50 keV to 5MeV. In the case of proton capture by {sup 7}Li nuclei, an M1 processwas taken into account in addition to the E1 transition, and a general behavior and the magnitude of the experimental S factor could be correctly reproduced owing to this at astrophysical energies, including the region around the resonance at 0.441 MeV (in the laboratory frame).

  9. Making Carbon Capture and Storage Efficient and Cost Competitive

    Broader source: Energy.gov [DOE]

    Assistant Secretary for Fossil Energy Charles McConnell visited Ohio State University to highlight new Energy Department investments in carbon capture and storage technologies.

  10. Sandia Energy - The CRF's Turbulent Combustion Lab (TCL) Captures...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    CRF's Turbulent Combustion Lab (TCL) Captures the Moment of Hydrogen Ignition Home Energy Transportation Energy CRF Facilities News News & Events Research & Capabilities The CRF's...

  11. New Materials for Capturing Carbon Dioxide from Combustion Gases

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    to APS Science Highlights rss feed New Materials for Capturing Carbon Dioxide from Combustion Gases April 9, 2014 Bookmark and Share The SIFSIX materials in order of increasing...

  12. New Computer Model Pinpoints Prime Materials for Carbon Capture

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    plants that spew carbon dioxide (CO2) into the atmosphere and contribute to global warming. While humans could potentially mitigate this effect by capturing CO2 from power...

  13. Carbon Dioxide Capture and Storage Demonstration in Developing...

    Open Energy Info (EERE)

    Carbon Dioxide Capture and Storage Demonstration in Developing Countries: Analysis of Key Policy Issues and Barriers Jump to: navigation, search Tool Summary LAUNCH TOOL Name:...

  14. Strategic Analysis of the Global Status of Carbon Capture and...

    Open Energy Info (EERE)

    Strategic Analysis of the Global Status of Carbon Capture and Storage (CCS): Country Studies, United Arab Emirates Jump to: navigation, search Tool Summary LAUNCH TOOL Name:...

  15. EIS-0464: Lake Charles Carbon Capture and Storage (CCS) Project...

    Broader source: Energy.gov (indexed) [DOE]

    for an award of financial assistance through a competitive process under the Industrial Carbon Capture and Sequestration Program. Public Comment Opportunities None available at...

  16. Progress and new developments in carbon capture and storage

    SciTech Connect (OSTI)

    Plasynski, S.I.; Litynski, J.T.; McIlvried, H.G.; Srivastava, R.D. [US DOE, Pittsburgh, PA (United States). National Energy Technology Laboratory

    2009-07-01T23:59:59.000Z

    Growing concern over the impact on global climate change of the buildup of greenhouse gases (GHGs) in the atmosphere has resulted in proposals to capture carbon dioxide (CO{sub 2}) at large point sources and store it in geologic formations, such as oil and gas reservoirs, unmineable coal seams, and saline formations, referred to as carbon capture and storage (CCS). There are three options for capturing CO{sub 2} from point sources: post-combustion capture, pre-combustion capture, and oxy-combustion. Several processes are available to capture CO{sub 2}, and new or improved processes are under development. However, CO{sub 2} capture is the most expensive part of CCS, typically accounting for 75% of overall cost. CCS will benefit significantly from the development of a lower cost post-combustion CO{sub 2} capture process that can be retrofitted to existing power plants. Once captured, the CO{sub 2} is compressed to about 150 atm and pipelined at supercritical conditions to a suitable storage site. Oil and gas reservoirs, because they have assured seals and are well characterized, are promising early opportunity sites. Saline formations are much more extensive and have a huge potential storage capacity, but are much less characterized. Several commercial and a number of pilot CCS projects are underway around the world.

  17. Capturing All the Light: Panchromatic Visible Absorption for...

    Office of Science (SC) Website

    Capturing All the Light: Panchromatic Visible Absorption for Solar Photoconversion Basic Energy Sciences (BES) BES Home About Research Facilities Science Highlights Benefits of BES...

  18. Lake Charles Carbon Capture and Sequestration Project U. S. Department...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Lake Charles Carbon Capture and Sequestration Project U. S. Department of Energy National Energy Technology Laboratory March 2014 1 INTRODUCTION The United States (U.S.) Department...

  19. New Funding from DOE Boosts Carbon Capture and Storage Research...

    Office of Environmental Management (EM)

    and other countries, it's crucial that we develop ways to capture and store carbon pollution," said Secretary Chu. "These technologies will not only give us a healthier planet,...

  20. Rechargeable Heat Battery's Secret Revealed: Solar Energy Capture...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Rechargeable Heat Battery Rechargeable Heat Battery's Secret Revealed Solar energy capture in chemical form makes it storable and transportable January 11, 2011 | Tags: Chemistry,...

  1. Radiative capture reactions in lattice effective field theory

    E-Print Network [OSTI]

    Gautam Rupak; Dean Lee

    2013-02-18T23:59:59.000Z

    We outline a general method for computing nuclear capture reactions on the lattice. The method consists of two major parts. In this study we detail the second part which consists of calculating an effective two-body capture reaction on the lattice at finite volume. We solve this problem by calculating the two-point Green's function using an infrared regulator and the capture amplitude to a two-body bound state. We demonstrate the details of this method by calculating on the lattice the leading M1 contribution to the radiative neutron capture on proton at low energies using pionless effective field theory. We find good agreement with exact continuum results.

  2. co2-capture-igcc-sri | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Carbon Dioxide Capture from Integrated Gasification Combined Cycle Gas Streams Using the Ammonium Carbonate-Ammonium Bicarbonate Process Project No.: DE-FE0000896 Batch scale...

  3. Secretary Chu Announces $3 Billion Investment for Carbon Capture...

    Broader source: Energy.gov (indexed) [DOE]

    toward a capture and sequestration goal of less than 10% increase in the cost of electricity for gasification systems and less than 35% for combustion and oxycombustion...

  4. Knowledge Capture and Transfer Program | Department of Energy

    Office of Environmental Management (EM)

    Capture and Transfer Program The Office of Learning and Workforce Development is working with Heads of Departmental Elements, DOE senior leaders and subject-matter-experts...

  5. Knowledge Capture and Transfer Program (KCTP) "Newly Created...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Powerpedia Page The Knowledge Capture and Transfer Program (KCTP) has a new logo and a newly created Powerpedia page. The page layout and program descriptions allow for...

  6. Repowering of the Midland Nuclear Station

    E-Print Network [OSTI]

    Gatlin, C. E. Jr.; Vellender, G. C.; Mooney, J. A.

    natural gas-fired cx:rnbined~cle plant ~~on utilized the original Midland Unit 1 steam turb~ am 12 gas t:w:bine heat recovery trains to prov de 1,165 MW of generatin;J capacity. 'Ihi.s ~ on included a staged approach to stagger availability of the ad... the largest cogeneration facility in the United States. The paper describes the project and the converted facility. 'Ibe Midland Cogeneration Plant started as a 2-unit nuclear-powered electric generating station supplyin;J cogenerated steam to an adjacent...

  7. Polk power station syngas cooling system

    SciTech Connect (OSTI)

    Jenkins, S.D.

    1995-01-01T23:59:59.000Z

    Tampa Electric Company (TEC) is in the site development and construction phase of the new Polk Power Station Unit No. 1. This will be the first unit at a new site and will use Integrated Gasification Combined Cycle (IGCC) Technology. The unit will utilize Texaco`s oxygen-blown, entrained-flow coal gasification, along with combined cycle power generation, to produce nominal 260MW. Integral to the gasification process is the syngas cooling system. The design, integration, fabrication, transportation, and erection of this equipment have provided and continue to provide major challenges for this project.

  8. Hellisheidi Geothermal Power Station | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are8COaBulkTransmissionSitingProcess.pdfGetec AG|InformationInformation Station - South Iceland Jump

  9. Schiller Station Biomass Facility | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to:Ezfeedflag JumpID-f < RAPID‎ |Rippey JumpAir Jump to: navigation,Delta Jump to:Station

  10. Early Station Costs Questionnaire | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny:RevisedAdvisory Board Contributions EMEMEnergyEarly Station Costs Questionnaire

  11. Tianlin Baxin Hydropower Station | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnualProperty Edit withTianlin Baxin Hydropower Station Jump to: navigation, search Name: Tianlin

  12. Alternative Fuels Data Center: Hydrogen Fueling Stations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625govInstrumentstdmadapInactiveVisiting the TWP TWP RelatedCellulase C.Tier 2NorthAvailabilityBasicsFueling Stations

  13. Rancia Geothermal Power Station | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghuraji Agro Industries Pvt Ltd Jump to: navigation, search Name:Rancia 2 Geothermal Power Station Jump

  14. Report on Experiments with Citrus Fruits at the Beeville Sub-station.

    E-Print Network [OSTI]

    Potts, A. T. (Arthur Tillman)

    1912-01-01T23:59:59.000Z

    !TEXAS AGRICULTURAL EXPERIMENT STATIONS BULLETIN No. 148. MAY, 1912. Report on Experiments With Citrus Fruits at The Bee- ville Sub-station A. T. POTTS, Superintendent Beeville Sub-station AUSTIN PRINTING COMPANY AUSTIN. TEXAS TEXAS... EXPERIMENT STATIONS. GOVERNING BOARD. 1 DIRECTOR OF STATIONS. ...................................... B. YOUNOBLOOD, M. S.. .College Station I SUPERINTENDENTS OF SUB-STATIONS. .................. E. E. BINFORD, Beeville Sub-station.. .Beeville, P:.e Cc...

  15. Ordered nanoporous carbon for increasing CO{sub 2} capture

    SciTech Connect (OSTI)

    Yoo, Hye-Min; Lee, Seul-Yi [Korea CCS R and D Center, Korea Institute of Energy Research, 152 Gajeongro, Yuseoung-gu, Daejeon 305-343 (Korea, Republic of); Department of Chemistry, Inha University, 100 Inharo, Nam-gu, Incheon 402-751 (Korea, Republic of); Park, Soo-Jin, E-mail: sjpark@inha.ac.kr [Korea CCS R and D Center, Korea Institute of Energy Research, 152 Gajeongro, Yuseoung-gu, Daejeon 305-343 (Korea, Republic of); Department of Chemistry, Inha University, 100 Inharo, Nam-gu, Incheon 402-751 (Korea, Republic of)

    2013-01-15T23:59:59.000Z

    Ordered nanoporous carbons (ONCs) were prepared using a soft-templating method. The prepared ONCs materials were subjected to a controlled carbonization temperature over the temperature range, 700-1000 Degree-Sign C, to increase the specific surface area and total pore volume of ordered nanoporous carbon followed by carbonization of the phenolic resin. ONCs materials synthesized at various carbonization temperatures were used as adsorbents to improve the CO{sub 2} adsorption efficiency. The surface properties of the ONCs materials were examined by X-ray photoelectron spectroscopy. The structural properties of the ONCs materials were analyzed by X-ray diffraction. The textural properties of the ONCs materials were examined using the N{sub 2}/77 K adsorption isotherms according to the Brunauer-Emmett-Teller equation. The CO{sub 2} adsorption capacity was measured by CO{sub 2} isothermal adsorption at 298 K/30 bar and 298 K/1 bar. The carbonization temperature was found to have a major effect on the CO{sub 2} adsorption capacity, resulting from the specific surface area and total pore volumes of the ONCs materials. - Graphical abstract: This schematic diagram described synthesis of ONCs. Highlights: Black-Right-Pointing-Pointer ONCs materials can be prepared readily using the direct-triblock-copolymer-templating method. Black-Right-Pointing-Pointer The distributions show that prominent development can be observed around the micro-pore region. Black-Right-Pointing-Pointer The soft-templating method provides opportunities for controlling the pore structure of ONCs. Black-Right-Pointing-Pointer From thermal power plants for CO2 capture by adsorption technology, is a new direction.

  16. The Construction of AMS-01 for the First Flight According to the NASA-DOE Agreement, before installation on the Space Station, AMS

    E-Print Network [OSTI]

    Roma "La Sapienza", Università di

    with the Institute of Electrical Engineering of the Chinese Academy of Science, Beijing. The magnet, the supporting configuration for the Space Shuttle flight. #12;32 I. The Construction of AMS-01 Magnet. The AMS-01 magnet. Figure 5 : Magnetic field orientation of the AMS-01 magnet Figure 5 shows the arrangement of field

  17. The University of Wisconsin-Milwaukee Field Station The Field Station is celebrating its 50th

    E-Print Network [OSTI]

    Saldin, Dilano

    land, until today the Field Station has grown into an active, vibrant facility with many projects for experimental research. Growth of our facilities has been funded by the National Science Foundation Bat Hibernaculum, an abandoned iron mine in Dodge County that is one of the largest sites

  18. DEVELOPING CARBON CAPTURE AND STORAGE Howard J Herzog

    E-Print Network [OSTI]

    of CO2, most notably CO2 for enhanced oil recovery (EOR), they have their limitations. Specifically, the cost for capturing CO2 from power plants is 2-4 times the cost that EOR operators are willing to pay, it is always cheaper to vent CO2 into the atmosphere than to capture and store it. Therefore

  19. The Social Dynamics of Carbon Capture and Storage

    E-Print Network [OSTI]

    The Social Dynamics of Carbon Capture and Storage Understanding CCS Representations, Governance studies. He works as a Research Associate at the Scottish Carbon Capture and Storage research centre works on assessing options for removal and storage of CO2. This includes techno-economic, socio

  20. The contribution of CO2 capture and storage

    E-Print Network [OSTI]

    The contribution of CO2 capture and storage to a sustainable energy system Policy brief the prospects of CO2 capture and storage (CCS) technologies in the power sector. Based on the results of 10. The uncertainties, particularly in storage capacities, are large. Using conservative estimates in line with the IPCC

  1. European and Global Perspectives for CO2 Capture and Storage

    E-Print Network [OSTI]

    European and Global Perspectives for CO2 Capture and Storage Heleen Groenenberg, Martine Uyterlinde, ECN Policy Studies, The Netherlands Abstract CO2 capture and storage (CCS) is increasingly mentioned a large point source, compression, transport and subsequent storage in a geological reservoir, the ocean

  2. CAPTURE OR CONTRACT?: THE EARLY YEARS OF ELECTRIC UTILITY REGULATION

    E-Print Network [OSTI]

    Lyon, Thomas P.

    CAPTURE OR CONTRACT?: THE EARLY YEARS OF ELECTRIC UTILITY REGULATION Thomas P. Lyon Nathan Wilson prices rose in states that adopted state regulation before 1917, suggesting that regulators were "captured" by the interests of the regulated electric utilities. An alternative explanation is that state

  3. Capturing Variability in Business Process Models: The Provop Approach

    E-Print Network [OSTI]

    Ulm, Universität

    Capturing Variability in Business Process Models: The Provop Approach Alena Hallerbach1 , Thomas be transferred to cross-organizational business processes as well [4]. A business process model captures models there exists a multitude of tools like ARIS Business Architect [5], ADONIS [6], and Web

  4. Capturing Molecular Energy Landscapes with Probabilistic Conformational Roadmaps

    E-Print Network [OSTI]

    Brutlag, Doug

    1 Capturing Molecular Energy Landscapes with Probabilistic Conformational Roadmaps Mehmet Serkan1 and Biochemistry2 Stanford University, Stanford, CA 94305, USA Abstract: Probabilistic roadmaps roadmap (PCR) tries to capture the connectivity of the low-energy subset of a conformational space

  5. THE COST OF CARBON CAPTURE Jeremy David and Howard Herzog

    E-Print Network [OSTI]

    's technology for CO2 separation and capture at three types of power plants: integrated coal gasification the economics of capturing CO2 at Integrated coal Gasification Combined Cycle (IGCC) power plants (six studies), Pulverized Coal (PC) power plants (four studies), and Natural Gas Combined Cycle (NGCC) power plants (four

  6. CO2 Capture by Absorption with Potassium Carbonate

    E-Print Network [OSTI]

    Rochelle, Gary T.

    CO2 Capture by Absorption with Potassium Carbonate First Quarterly Report 2006 Quarterly Progress the process for CO2 capture by alkanolamine absorption/stripping by developing an alternative solvent, aqueous.................................................................................................................................... 8 Task 1 ­ Modeling Performance of Absorption/Stripping of CO2 with Aqueous K2CO3 Promoted

  7. CO2 Capture by Absorption with Potassium Carbonate

    E-Print Network [OSTI]

    Rochelle, Gary T.

    CO2 Capture by Absorption with Potassium Carbonate Third Quarterly Report 2006 Quarterly Progress of this work is to improve the process for CO2 capture by alkanolamine absorption/stripping by developing...................................................................................................................................11 Task 1 ­ Modeling Performance of Absorption/Stripping of CO2 with Aqueous K2CO3 Promoted

  8. CO2 Capture by Absorption with Potassium Carbonate

    E-Print Network [OSTI]

    Rochelle, Gary T.

    CO2 Capture by Absorption with Potassium Carbonate Second Quarterly Report 2006 Quarterly Progress of this work is to improve the process for CO2 capture by alkanolamine absorption/stripping by developing.................................................................................................................................. 10 Task 1 ­ Modeling Performance of Absorption/Stripping of CO2 with Aqueous K2CO3 Promoted

  9. Effective Load Management for the City of College Station 

    E-Print Network [OSTI]

    Hecox, O. D.; Bauer, V.

    1985-01-01T23:59:59.000Z

    aspects a. Complete energy survey of all faci- lities whose utilities the city pays to Valerie Bauer Chairman College Station Energy Hanagement Committee College Station, TX establish load reduction possibilities. b. Sub-station load surveillance... for tech- nical assistance, resulting in Orlin D. Hecox assist- ing throughout the summer. Several meetings were arranged in June with city department heads to provide them with billing histories and meter sheets on their facilities and to outline...

  10. Neutron capture of 26Mg at thermonuclear energies

    E-Print Network [OSTI]

    P. Mohr; H. Beer; H. Oberhummer; G. Staudt

    1998-05-20T23:59:59.000Z

    The neutron capture cross section of 26Mg was measured relative to the known gold cross section at thermonuclear energies using the fast cyclic activation technique. The experiment was performed at the 3.75 MV Van-de-Graaff accelerator, Forschungszentrum Karlsruhe. The experimental capture cross section is the sum of resonant and direct contributions. For the resonance at E(n,lab) = 220 keV our new results are in disagreement with the data from Weigmann et al. An improved Maxwellian averaged capture cross section is derived from the new experimental data taking into account s- and p-wave capture and resonant contributions. The properties of so-called potential resonances which influence the p-wave neutron capture of 26}Mg are discussed in detail.

  11. 20,000 and Counting: Alternative Fueling and Charging Stations...

    Broader source: Energy.gov (indexed) [DOE]

    gas, electricity, E85 (up to 85% ethanol), hydrogen, liquefied natural gas, and propane. The Station Locator offers drivers several ways to search for and sort information:...

  12. H2FIRST Reference Station Design Task: Project Deliverable 2...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    electric vehicle customers have a positive fueling experience relative to conventional gasolinediesel stations as vehicles are introduced (2015-2017) and transition to advanced...

  13. H2FIRST Reference Station Design Task: Project Deliverable 2...

    Broader source: Energy.gov (indexed) [DOE]

    layouts. This work presents the hydrogen community with a uniform, cost-optimal formula for designing and building hydrogen stations. The piping and instrumentation diagrams...

  14. Data report for the Northeast Residential Experiment Station, November 1981

    SciTech Connect (OSTI)

    Russell, M.C.; Raghuraman, P.; Mahoney, P.C.

    1981-12-01T23:59:59.000Z

    Physical performance data for the month of November 1981 obtained from photovoltaic energy systems under test at the Northeast Residential Experiment Station in Concord, Massachusetts are tabulated.

  15. Geothermal system saving money at fire station | Department of...

    Broader source: Energy.gov (indexed) [DOE]

    of the College Township municipal building earlier this year in State College, Pa., home to Pennsylvania State University. The station has rooms and amenities for live-in...

  16. New Jersey Nuclear Profile - PSEG Salem Generating Station

    U.S. Energy Information Administration (EIA) Indexed Site

    PSEG Salem Generating Station" "Unit","Summer capacity (mw)","Net generation (thousand mwh)","Summer capacity factor (percent)","Type","Commercial operation date","License...

  17. California Nuclear Profile - San Onofre Nuclear Generating Station

    U.S. Energy Information Administration (EIA) Indexed Site

    San Onofre Nuclear Generating Station" "Unit","Summer capacity (mw)","Net generation (thousand mwh)","Summer capacity factor (percent)","Type","Commercial operation date","License...

  18. New Jersey Nuclear Profile - PSEG Hope Creek Generating Station

    U.S. Energy Information Administration (EIA) Indexed Site

    PSEG Hope Creek Generating Station" "Unit","Summer capacity (mw)","Net generation (thousand mwh)","Summer capacity factor (percent)","Type","Commercial operation date","License...

  19. Illinois Nuclear Profile - LaSalle Generating Station

    U.S. Energy Information Administration (EIA) Indexed Site

    LaSalle Generating Station" "Unit","Summer capacity (mw)","Net generation (thousand mwh)","Summer capacity factor (percent)","Type","Commercial operation date","License expiration...

  20. New York Nuclear Profile - Nine Mile Point Nuclear Station

    U.S. Energy Information Administration (EIA) Indexed Site

    Nine Mile Point Nuclear Station" "Unit","Summer capacity (mw)","Net generation (thousand mwh)","Summer capacity factor (percent)","Type","Commercial operation date","License...

  1. Microgrid V2G Charging Station Interconnection Testing (Presentation)

    SciTech Connect (OSTI)

    Simpson, M.

    2013-07-01T23:59:59.000Z

    This presentation by Mike Simpson of the National Renewable Energy Laboratory (NREL) describes NREL's microgrid vehicle-to-grid charging station interconnection testing.

  2. anna power station: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    1 Regarding Kewaunee Power Station CiteSeer Summary: This supplemental environmental impact statement (SEIS) has been prepared in response to an application submitted by Dominion...

  3. anna power stations: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    1 Regarding Kewaunee Power Station CiteSeer Summary: This supplemental environmental impact statement (SEIS) has been prepared in response to an application submitted by Dominion...

  4. air station cape: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    :M. J. Evans :S. R. Arnold Institute for Climate & Atmospheric Science, School 137 OF CAR SHARING STATIONS CiteSeer Summary: Approximately half of the worlds population is...

  5. Re: Potomac River Generating Station Department of Energy Case...

    Energy Savers [EERE]

    PEPCO is providing you with information regarding the planned transmission maintenance outage Re: Potomac River Generating Station Department of Energy Case No. EO-05-01: PEPCO is...

  6. EIS-0478: Antelope Valley Station to Neset Transmission Project...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Mercer, Dunn, Billings, Williams, McKenzie, and Mountrail Counties, North Dakota EIS-0478: Antelope Valley Station to Neset Transmission Project, Mercer, Dunn, Billings,...

  7. Columbia River Basin Accords -Narrative Proposal Form 1 200880000 ISRP FAN1B

    E-Print Network [OSTI]

    : The Columbia Basin Fish Accords (Accords) are ten-year agreements between the federal action agencies and states and tribes. The Accords supplement the Columbia Basin Fish and Wildlife Program and are intended substantial biological benefits for Columbia Basin fish. The Accords also acknowledge the tribes' and states

  8. Solar Powered Radioactive Air Monitoring Stations

    SciTech Connect (OSTI)

    Barnett, J. M.; Bisping, Lynn E.; Gervais, Todd L.

    2013-10-30T23:59:59.000Z

    Environmental monitoring of ambient air for radioactive material is required as stipulated in the PNNL Site radioactive air license. Sampling ambient air at identified preferred locations could not be initially accomplished because utilities were not readily available. Therefore, solar powered environmental monitoring systems were considered as a possible option. PNNL purchased two 24-V DC solar powered environmental monitoring systems which consisted of solar panels, battery banks, and sampling units. During an approximate four month performance evaluation period, the solar stations operated satisfactorily at an on-site test location. They were subsequently relocated to their preferred locations in June 2012 where they continue to function adequately under the conditions found in Richland, Washington.

  9. Condensate polishing at Surry Nuclear Power Station

    SciTech Connect (OSTI)

    McNea, D.A.; Siegwarth, D.P.; Friedman, K.A.; Sawochka, S.G.

    1983-06-01T23:59:59.000Z

    Condensate polisher system design and operation at the Surry Nuclear Power Station of Virginia Electric and Power Company were evaluated relative to the ability of the polishers to achieve effluent water quality consistent with PWR Steam Generator Owners Group chemistry guidelines. Polishers regenerated employing a conventional process were evaluated during normal plant operation and during periods of simulated condenser inleakage. Polisher effluent quality was consistent with requirements for PWR steam generator corrosion minimization with minor exceptions, i.e., sodium and sulfate leakage immediately following initiation of most service cycles. Resin aging and incomplete separation of anion and cation resin during the regeneration process were the major reasons for non-optimum polisher performance.

  10. Strategies for Demonstration and Early Deployment of Carbon Capture and Storage: A Technical and Economic Assessment of Capture Percentage

    E-Print Network [OSTI]

    and Policy at the Massachusetts Institute of Technology ABSTRACT Carbon capture and storage (CCSStrategies for Demonstration and Early Deployment of Carbon Capture and Storage: A Technical and Astronautics and Engineering Systems Director, Technology and Policy Program Accepted by William M. Deen Carbon

  11. Project X Energy Station Workshop Report. Report by the Organizers and Co-Conveners of the Project X Energy Station Workshop

    SciTech Connect (OSTI)

    Asner, David M.; Hurh, Patrick; Brady Raap, Michaele C.; Gohar, Yoursy; Peterson, Mary E.; Pithcer, Eric; Riemer, Bernie; Senor, David J.; Wootan, David W.

    2013-06-14T23:59:59.000Z

    Project X Energy Station Workshop Report Report by the Organizers and Co-Conveners of the Project X Energy Station Workshop

  12. Final environmental assessment for vegetation control at VHF stations, microwave stations, electrical substations, and pole yards

    SciTech Connect (OSTI)

    NONE

    1995-10-13T23:59:59.000Z

    Southwestern Power Adm. operates very high frequency (VHF) and microwave radio stations, electrical substations, and pole yards for electric power transmission throughout AR, MO, and OK. Vegetation growth at the stations must be suppressed for safety of operation and personnel. Southwestern has been using a combination of mechanical/manual and herbicide control for this purpose; Federally- mandated reductions in staff and budgetary resources require Southwestern to evaluate all potentially efficient methods for vegetation control. Three alternatives were examined: no action, mechanical/manual control, and (proposed) a combination of mechanical/manual and herbicide control. Environmental impacts on air and water quality, wetlands, wildlife, endangered species, archaeological and other resources, farmland, human health, transportation, etc. were evaluated.

  13. Radiative neutron capture on 9be, 14c, 14n, 15n and 16o at thermal and astrophysical energies

    E-Print Network [OSTI]

    Sergey Dubovichenko; Albert Dzhazairov-Kakhramanov; Nadezhda Afanasyeva

    2014-01-28T23:59:59.000Z

    The total cross sections of the radiative neutron capture processes on 9Be, 14C, 14N, 15N, and 16O are described in the framework of the modified potential cluster model with the classification of orbital states according to Young tableaux. The continued interest in the study of these reactions is due, on the one hand, to the important role played by this process in the analysis of many fundamental properties of nuclei and nuclear reactions, and, on the other hand, to the wide use of the capture cross section data in the various applications of nuclear physics and nuclear astrophysics, and, also, to the importance of the analysis of primordial nucleosynthesis in the Universe. This article is devoted to the description of results for the processes of the radiative neutron capture on certain light atomic nuclei at thermal and astrophysical energies. The considered capture reactions are not part of stellar thermonuclear cycles, but involve in the reaction chains of inhomogeneous Big Bang models.

  14. Expansion of Michigan EOR Operations Using Advanced Amine Technology at a 600 MW Project Wolverine Carbon Capture and Storage Project

    SciTech Connect (OSTI)

    H Hoffman; Y kishinevsky; S. Wu; R. Pardini; E. Tripp; D. Barnes

    2010-06-16T23:59:59.000Z

    Wolverine Power Supply Cooperative Inc, a member owned cooperative utility based in Cadillac Michigan, proposes to demonstrate the capture, beneficial utilization and storage of CO{sub 2} in the expansion of existing Enhanced Oil Recovery operations. This project is being proposed in response to the US Department of Energy Solicitation DE-FOA-0000015 Section III D, 'Large Scale Industrial CCS projects from Industrial Sources' Technology Area 1. The project will remove 1,000 metric tons per day of CO{sub 2} from the Wolverine Clean Energy Venture 600 MW CFB power plant owned and operated by WPC. CO{sub 2} from the flue gas will be captured using Hitachi's CO{sub 2} capture system and advanced amine technology. The capture system with the advanced amine-based solvent supplied by Hitachi is expected to significantly reduce the cost and energy requirements of CO{sub 2} capture compared to current technologies. The captured CO{sub 2} will be compressed and transported for Enhanced Oil Recovery and CO{sub 2} storage purposes. Enhanced Oil Recovery is a proven concept, widely used to recover otherwise inaccessible petroleum reserves. While post-combustion CO{sub 2} capture technologies have been tested at the pilot scale on coal power plant flue gas, they have not yet been demonstrated at a commercial scale and integrated with EOR and storage operations. Amine-based CO{sub 2} capture is the leading technology expected to be available commercially within this decade to enable CCS for utility and industrial facilities firing coal and waste fuels such as petroleum coke. However, traditional CO{sub 2} capture process utilizing commercial amine solvents is very energy intensive for regeneration and is also susceptible to solvent degradation by oxygen as well as SOx and NO{sub 2} in the flue gas, resulting in large operating costs. The large volume of combustion flue gas with its low CO{sub 2} concentration requires large equipment sizes, which together with the highly corrosive nature of the typical amine-based separation process leads to high plant capital investment. According to recent DOE-NETL studies, MEA-based CCS will increase the cost of electricity of a new pulverized coal plant by 80-85% and reduce the net plant efficiency by about 30%. Non-power industrial facilities will incur similar production output and efficiency penalties when implementing conventional carbon capture systems. The proposed large scale demonstration project combining advanced amine CO{sub 2} capture integrated with commercial EOR operations significantly advances post-combustion technology development toward the DOE objectives of reducing the cost of energy production and improving the efficiency of CO{sub 2} Capture technologies. WPC has assembled a strong multidisciplinary team to meet the objectives of this project. WPC will provide the host site and Hitachi will provide the carbon capture technology and advanced solvent. Burns and Roe bring expertise in overall engineering integration and plant design to the team. Core Energy, an active EOR producer/operator in the State of Michigan, is committed to support the detailed design, construction and operation of the CO{sub 2} pipeline and storage component of the project. This team has developed a Front End Engineering Design and Cost Estimate as part of Phase 1 of DOE Award DE-FE0002477.

  15. Field Stations Compliance CommitteesAdministrative Units Research Units

    E-Print Network [OSTI]

    Walker, Matthew P.

    ) Center for Integrative Planetary Science Center for Latin American Studies Center for Medicine Museums Blue Oak Ranch Reserve Donner Region-Field Research Stations -Chickering American River Reserve, Ecology and Reproduction Gump South Pacific Research Station Hans Jenny Pygmy Forest Reserve Hastings

  16. Achieving High Chilled Water Delta T Without Blending Station

    E-Print Network [OSTI]

    Wang, Z.; Wang, G.; Xu, K.; Yu, Y.; Liu, M.

    2007-01-01T23:59:59.000Z

    on the blending station performance. The results show that the blending station is not necessary in the building chilled water systems with 2-way modulation valves at end users. Actually the end user valve configuration and control mainly impacts building chilled...

  17. RADIOLOGICAL SURVEY STATION DEVELOPMENT FOR THE PIT DISASSEMBLY AND CONVERSION PROJECT

    SciTech Connect (OSTI)

    Dalmaso, M.; Gibbs, K.; Gregory, D.

    2011-05-22T23:59:59.000Z

    The Savannah River National Laboratory (SRNL) has developed prototype equipment to demonstrate remote surveying of Inner and Outer DOE Standard 3013 containers for fixed and transferable contamination in accordance with DOE Standard 3013 and 10 CFR 835 Appendix B. When fully developed the equipment will be part of a larger suite of equipment used to package material in accordance with DOE Standard 3013 at the Pit Disassembly and Conversion Project slated for installation at the Savannah River Site. The prototype system consists of a small six-axis industrial robot with an end effector consisting of a force sensor, vacuum gripper and a three fingered pneumatic gripper. The work cell also contains two alpha survey instruments, swipes, swipe dispenser, and other ancillary equipment. An external controller interfaces with the robot controller, survey instruments and other ancillary equipment to control the overall process. SRNL is developing automated equipment for the Pit Disassembly and Conversion (PDC) Project that is slated for the Savannah River Site (SRS). The equipment being developed is automated packaging equipment for packaging plutonium bearing materials in accordance with DOE-STD-3013-2004. The subject of this paper is the development of a prototype Radiological Survey Station (RSS). Other automated equipment being developed for the PDC includes the Bagless transfer System, Outer Can Welder, Gantry Robot System (GRS) and Leak Test Station. The purpose of the RSS is to perform a frisk and swipe of the DOE Standard 3013 Container (either inner can or outer can) to check for fixed and transferable contamination. This is required to verify that the contamination levels are within the limits specified in DOE-STD-3013-2004 and 10 CFR 835, Appendix D. The surface contamination limit for the 3013 Outer Can (OC) is 500 dpm/100 cm2 (total) and 20 dpm/100 cm2 (transferable). This paper will concentrate on the RSS developments for the 3013 OC but the system for the 3013 Inner Can (IC) is nearly identical.

  18. Validation of an Integrated Hydrogen Energy Station

    SciTech Connect (OSTI)

    Edward C. Heydorn

    2012-10-26T23:59:59.000Z

    This report presents the results of a 10-year project conducted by Air Products and Chemicals, Inc. (Air Products) to determine the feasibility of coproducing hydrogen with electricity. The primary objective was to demonstrate the technical and economic viability of a hydrogen energy station using a high-temperature fuel cell designed to produce power and hydrogen. This four-phase project had intermediate go/no-go decisions and the following specific goals: �¢���¢ Complete a technical assessment and economic analysis of the use of high-temperature fuel cells, including solid oxide and molten carbonate, for the co-production of power and hydrogen (energy park concept). �¢���¢ Build on the experience gained at the Las Vegas H2 Energy Station and compare/contrast the two approaches for co-production. �¢���¢ Determine the applicability of co-production from a high-temperature fuel cell for the existing merchant hydrogen market and for the emerging hydrogen economy. �¢���¢ Demonstrate the concept on natural gas for six months at a suitable site with demand for both hydrogen and electricity. �¢���¢ Maintain safety as the top priority in the system design and operation. �¢���¢ Obtain adequate operational data to provide the basis for future commercial activities, including hydrogen fueling stations. Work began with the execution of the cooperative agreement with DOE on 30 September 2001. During Phase 1, Air Products identified high-temperature fuel cells as having the potential to meet the coproduction targets, and the molten carbonate fuel cell system from FuelCell Energy, Inc. (FuelCell Energy) was selected by Air Products and DOE following the feasibility assessment performed during Phase 2. Detailed design, construction and shop validation testing of a system to produce 250 kW of electricity and 100 kilograms per day of hydrogen, along with site selection to include a renewable feedstock for the fuel cell, were completed in Phase 3. The system also completed six months of demonstration operation at the wastewater treatment facility operated by Orange County Sanitation District (OCSD, Fountain Valley, CA). As part of achieving the objective of operating on a renewable feedstock, Air Products secured additional funding via an award from the California Air Resources Board. The South Coast Air Quality Management District also provided cost share which supported the objectives of this project. System operation at OCSD confirmed the results from shop validation testing performed during Phase 3. Hydrogen was produced at rates and purity that met the targets from the system design basis, and coproduction efficiency exceeded the 50% target set in conjunction with input from the DOE. Hydrogen production economics, updated from the Phase 2 analysis, showed pricing of $5 to $6 per kilogram of hydrogen using current gas purification systems. Hydrogen costs under $3 per kilogram are achievable if next-generation electrochemical separation technologies become available.

  19. A computer program for HVDC converter station RF noise calculations

    SciTech Connect (OSTI)

    Kasten, D.G.; Caldecott, R.; Sebo, S.A. (Ohio State Univ., Columbus, OH (United States). Dept. of Electrical Engineering); Liu, Y. (Virginia Polytechnic Inst. State Univ., Blacksburg, VA (United States). Bradley Dept. of Electrical Engineering)

    1994-04-01T23:59:59.000Z

    HVDC converter station operations generate radio frequency (RF) electromagnetic (EM) noise which could interfere with adjacent communication and computer equipment, and carrier system operations. A generic Radio Frequency Computer Analysis Program (RAFCAP) for calculating the EM noise generated by valve ignition of a converter station has been developed as part of a larger project. The program calculates RF voltages, currents, complex power, ground level electric field strength and magnetic flux density in and around an HVDC converter station. The program requires the converter station network to be represented by frequency dependent impedance functions. Comparisons of calculated and measured values are given for an actual HVDC station to illustrate the validity of the program. RAFCAP is designed to be used by engineers for the purpose of calculating the RF noise produced by the igniting of HVDC converter valves.

  20. The full fuel cycle of CO{sub 2} capture and disposal capture and disposal technology

    SciTech Connect (OSTI)

    Saroff, L.

    1995-12-31T23:59:59.000Z

    The overall objective of this study was to develop a methodology for the evaluation of the energy usage and cost both private and societal (external cost)for full fuel cycles. It was envisioned that other organizations could employ the methodology with minor alterations for a consistent means of evaluating full fuel cycles. The methodology has been applied to three fossil fuel electric generation processes each producing 500 MWe (net). These are: a Natural Gas Combined Cycle (NGCC) power plant burning natural gas with direct CO{sub 2} capture and disposal; an Integrated Gasification Combined Cycle (IGCC) power plant burning coal with direct CO{sub 2} capture and disposal; and a Pulverized Fuel (PC) power plant burning coal with a managed forest indirectly sequestering CO{sub 2}. The primary aim is to provide decision makers with information from which to derive policy. Thus, the evaluation reports total energy used, private costs to build the facility, emissions and burdens, and the valuation (externalities) of the impacts of the burdens. The energy usage, private costs including capture and disposal, and emissions are reported in this paper. The valuations and analysis of the impact of the plant on the environment are reported in the companion paper. The loss in efficiency (LHV) considering the full fuel cycle as opposed to the thermal efficiency of the power plant is; 0.9, 2.4, and 4.6 for the NGCC, IGCC, and PC+controls, respectively. Electricity cost, c/kWh, including capital, operating and fuel, at a 10% discount rate. ranges from 5.6 to 7.08 for NGCC and 7.24 to 8.61 for IGCC. The range is dependent on the mode of disposal, primarily due to the long pipeline to reach a site for the pope disposal in the ocean. For the PC+ controls then is a considerable range from 7.66 to over 16 c/kWh dependent on the size and cost of the managed forest.

  1. Hybrid Membrane/Absorption Process for Post-combustion CO2 Capture

    SciTech Connect (OSTI)

    Li, Shiguang; Shou, S.; Pyrzynski, Travis; Makkuni, Ajay; Meyer, Howard

    2013-12-31T23:59:59.000Z

    This report summarizes scientific/technical progress made for bench-scale membrane contactor technology for post-combustion CO2 capture from DOE Contract No. DE-FE-0004787. Budget Period 1 (BP1) membrane absorber, Budget Period 2 (BP2) membrane desorber and Budget Period 3 (BP3) integrated system and field testing studies have been completed successfully and met or exceeded the technical targets (? 90% CO2 removal and CO2 purity of 97% in one membrane stage). Significant breakthroughs are summarized below: BP1 research: The feasibility of utilizing the poly (ether ether ketone), PEEK, based hollow fiber contractor (HFC) in combination with chemical solvents to separate and capture at least 90% of the CO2 from simulated flue gases has been successfully established. Excellent progress has been made as we have achieved the BP1 goal: ? 1,000 membrane intrinsic CO2 permeance, ? 90% CO2 removal in one stage, ? 2 psi gas side pressure drop, and ? 1 (sec)-1 mass transfer coefficient. Initial test results also show that the CO2 capture performance, using activated Methyl Diethanol Amine (aMDEA) solvent, was not affected by flue gas contaminants O2 (~3%), NO2 (66 ppmv), and SO2 (145 ppmv). BP2 research: The feasibility of utilizing the PEEK HFC for CO2-loaded solvent regeneration has been successfully established High CO2 stripping flux, one order of magnitude higher than CO2 absorption flux, have been achieved. Refined economic evaluation based on BP1 membrane absorber and BP2 membrane desorber laboratory test data indicate that the CO2 capture costs are 36% lower than DOE’s benchmark amine absorption technology. BP3 research: A bench-scale system utilizing a membrane absorber and desorber was integrated into a continuous CO2 capture process using contactors containing 10 to 20 ft2 of membrane area. The integrated process operation was stable through a 100-hour laboratory test, utilizing a simulated flue gas stream. Greater than 90% CO2 capture combined with 97% CO2 product purity was achieved throughout the test. Membrane contactor modules have been scaled from bench scale 2-inch diameter by 12-inch long (20 ft2 membrane surface area) modules to 4-inch diameter by 60-inch long pilot scale modules (165 ft2 membrane surface area). Pilot scale modules were tested in an integrated absorption/regeneration system for CO2 capture field tests at a coal-fired power plant (Midwest Generation’s Will County Station located in Romeoville, IL). Absorption and regeneration contactors were constructed utilizing high performance super-hydrophobic, nano-porous PEEK membranes with CO2 gas permeance of 2,000 GPU and a 1,000 GPU, respectively. Field tests using aMDEA solvent achieved greater than 90% CO2 removal in a single stage. The absorption mass transfer coefficient was 1.2 (sec)-1, exceeding the initial target of 1.0 (sec)-1. This mass transfer coefficient is over one order of magnitude greater than that of conventional gas/liquid contacting equipment. The economic evaluation based on field tests data indicates that the CO2 capture cost associated with membrane contactor technology is $54.69 (Yr 2011$)/tonne of CO2 captured when using aMDEA as a solvent. It is projected that the DOE’s 2025 cost goal of $40 (Yr 2011$)/tonne of CO2 captured can be met by decreasing membrane module cost and by utilizing advanced CO2 capture solvents. In the second stage of the field test, an advanced solvent, Hitachi’s H3-1 was utilized. The use of H3-1 solvent increased mass transfer coefficient by 17% as compared to aMDEA solvent. The high mass transfer coefficient of H3-1 solvent combined with much more favorable solvent regeneration requirements, indicate that the projected savings achievable with membrane contactor process can be further improved. H3-1 solvent will be used in the next pilot-scale development phase. The integrated absorption/regeneration process design and high performance membrane contactors developed in the current bench-scale program will be used as the base technology for future pilot-scale development.

  2. Capturing Energy Efficiency Upgrades in the Real Estate Transaction

    Broader source: Energy.gov [DOE]

    "Capturing Energy Efficiency Upgrades in the Real Estate Transaction," by Residential Energy Efficiency Solutions, July 10, 2012. Describes the concept of a residential MPG number as a simple way of describing a home’s energy consumption.

  3. Sensitivity studies for the weak r process: neutron capture rates

    SciTech Connect (OSTI)

    Surman, R., E-mail: surmanr@union.edu [Department of Physics and Astronomy, Union College, Schenectady, NY 12308 (United States); Mumpower, M. [Department of Physics, University of Notre Dame, Notre Dame, IN 46556 (United States)] [Department of Physics, University of Notre Dame, Notre Dame, IN 46556 (United States); Sinclair, R.; Jones, K. L. [Department of Physics and Astronomy, University of Tennessee, Knoxville, TN 37996 (United States)] [Department of Physics and Astronomy, University of Tennessee, Knoxville, TN 37996 (United States); Hix, W. R. [Department of Physics and Astronomy, University of Tennessee, Knoxville, TN 37996 (United States) [Department of Physics and Astronomy, University of Tennessee, Knoxville, TN 37996 (United States); Physics Division, Oak Ridge National Laboratory, Oak Ridge, TN 37831 (United States); McLaughlin, G. C. [Department of Physics, North Carolina State University, Raleigh, NC 27695 (United States)] [Department of Physics, North Carolina State University, Raleigh, NC 27695 (United States)

    2014-04-15T23:59:59.000Z

    Rapid neutron capture nucleosynthesis involves thousands of nuclear species far from stability, whose nuclear properties need to be understood in order to accurately predict nucleosynthetic outcomes. Recently sensitivity studies have provided a deeper understanding of how the r process proceeds and have identified pieces of nuclear data of interest for further experimental or theoretical study. A key result of these studies has been to point out the importance of individual neutron capture rates in setting the final r-process abundance pattern for a ‘main’ (A ? 130 peak and above) r process. Here we examine neutron capture in the context of a ‘weak’ r process that forms primarily the A ? 80 r-process abundance peak. We identify the astrophysical conditions required to produce this peak region through weak r-processing and point out the neutron capture rates that most strongly influence the final abundance pattern.

  4. New Membrane Technology for Post-Combustion Carbon Capture Begins...

    Energy Savers [EERE]

    (DOE) for economically capturing 90 percent of the carbon dioxide (CO2) emitted from a coal-burning power plant has begun pilot-scale testing. The technology is the PolarisTM...

  5. Carbon Capture and Storage from Industrial Sources | Department...

    Broader source: Energy.gov (indexed) [DOE]

    2012. Air Products will transport the captured gas to oil fields in eastern Texas by pipeline where it will be used for enhanced oil recovery. The project team includes Air...

  6. Apparatus and method for detecting full-capture radiation events

    DOE Patents [OSTI]

    Odell, D.M.C.

    1994-10-11T23:59:59.000Z

    An apparatus and method are disclosed for sampling the output signal of a radiation detector and distinguishing full-capture radiation events from Compton scattering events. The output signal of a radiation detector is continuously sampled. The samples are converted to digital values and input to a discriminator where samples that are representative of events are identified. The discriminator transfers only event samples, that is, samples representing full-capture events and Compton events, to a signal processor where the samples are saved in a three-dimensional count matrix with time (from the time of onset of the pulse) on the first axis, sample pulse current amplitude on the second axis, and number of samples on the third axis. The stored data are analyzed to separate the Compton events from full-capture events, and the energy of the full-capture events is determined without having determined the energies of any of the individual radiation detector events. 4 figs.

  7. Apparatus and method for detecting full-capture radiation events

    DOE Patents [OSTI]

    Odell, Daniel M. C. (Aiken, SC)

    1994-01-01T23:59:59.000Z

    An apparatus and method for sampling the output signal of a radiation detector and distinguishing full-capture radiation events from Compton scattering events. The output signal of a radiation detector is continuously sampled. The samples are converted to digital values and input to a discriminator where samples that are representative of events are identified. The discriminator transfers only event samples, that is, samples representing full-capture events and Compton events, to a signal processor where the samples are saved in a three-dimensional count matrix with time (from the time of onset of the pulse) on the first axis, sample pulse current amplitude on the second axis, and number of samples on the third axis. The stored data are analyzed to separate the Compton events from full-capture events, and the energy of the full-capture events is determined without having determined the energies of any of the individual radiation detector events.

  8. Rapid screening of novel nanoporous materials for carbon capture separations 

    E-Print Network [OSTI]

    Mangano, Enzo

    2013-07-01T23:59:59.000Z

    In this work the experimental results from the rapid screening and ranking of a wide range of novel adsorbents for carbon capture are presented. The samples were tested using the Zero Length Column (ZLC) method which has ...

  9. Stakeholder attitudes on carbon capture and storage -- An international comparison

    E-Print Network [OSTI]

    Johnsson, Filip

    This paper presents results from a survey on stakeholder attitudes towards Carbon Capture and Storage (CCS). The survey is the first to make a global comparison across three major regions; USA, Japan, and Europe. The ...

  10. Sandia National Laboratories: capture more wind with longer rotors

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    capture more wind with longer rotors New Material Tests Show Biaxial Laminate Creep Is Important for Large Wind-Turbine Blades On April 1, 2014, in Energy, News, News & Events,...

  11. Low-energy capture of asteroids onto KAM tori

    E-Print Network [OSTI]

    Patricia E. Verrier; Colin R. McInnes

    2015-01-13T23:59:59.000Z

    We present a new method for engineering the artificial capture of asteroids. Based on theories of the chaos-assisted capture of natural satellites of the giant planets, we show how an unbound asteroid that passes close to a regular region of phase space can be easily moved onto the nearby KAM tori and essentially permanently captured with the Earth's Hill sphere without closing the zero velocity curves. The method has the advantages of a relatively low delta-v requirement and no need for control strategies. An illustration of the method is given for an example asteroid trajectory, demonstrating that it is a viable strategy for the final capture stage of asteroids in the Earth's neighbourhood.

  12. Radiobiology of normal rat lung in Boron Neutron Capture Therapy

    E-Print Network [OSTI]

    Kiger, Jingli Liu

    2006-01-01T23:59:59.000Z

    Boron Neutron Capture Therapy (BNCT) is a binary cancer radiation therapy that utilizes biochemical tumor cell targeting and provides a mixed field of high and low Linear Energy Transfer (LET) radiation with differing ...

  13. Capturing Data Uncertainty in High-Volume Stream Processing

    E-Print Network [OSTI]

    Diao, Yanlei; Liu, Anna; Peng, Liping; Sutton, Charles; Tran, Thanh; Zink, Michael

    2009-01-01T23:59:59.000Z

    We present the design and development of a data stream system that captures data uncertainty from data collection to query processing to final result generation. Our system focuses on data that is naturally modeled as continuous random variables. For such data, our system employs an approach grounded in probability and statistical theory to capture data uncertainty and integrates this approach into high-volume stream processing. The first component of our system captures uncertainty of raw data streams from sensing devices. Since such raw streams can be highly noisy and may not carry sufficient information for query processing, our system employs probabilistic models of the data generation process and stream-speed inference to transform raw data into a desired format with an uncertainty metric. The second component captures uncertainty as data propagates through query operators. To efficiently quantify result uncertainty of a query operator, we explore a variety of techniques based on probability and statisti...

  14. Some Y-12 stories captured by Bill Wilcox

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Y-12 stories captured by Bill Wilcox One of the reference books I keep open on my desk is An Overview of the History of Y-12, 1942-1992- A Chronology of Some Noteworthy Events and...

  15. Perspectives on Carbon Capture and Sequestration in the United States

    E-Print Network [OSTI]

    Wong-Parodi, Gabrielle

    2011-01-01T23:59:59.000Z

    acceptance of carbon dioxide storage Energy Policy 35 2780–carbon dioxide capture and storage RD&D roadmap; National EnergyEnergy 2006 Sequestration test to demonstrate carbon dioxide storage

  16. Multiplexed photography : single-exposure capture of multiple camera settings

    E-Print Network [OSTI]

    Green, Paul Elijah

    2009-01-01T23:59:59.000Z

    The space of camera settings is large and individual settings can vary dramatically from scene to scene. This thesis explores methods for capturing and manipulating multiple camera settings in a single exposure. Multiplexing ...

  17. Marine transportation for Carbon Capture and Sequestration (CCS)

    E-Print Network [OSTI]

    Alexandrakis, Mary-Irene

    2010-01-01T23:59:59.000Z

    The objective of this report is to determine whether opportunities to use liquefied carbon dioxide carriers as part of a carbon capture and storage system will exist over the next twenty years. Factors that encourage or ...

  18. Value Capture in the Global Wind Energy Industry

    E-Print Network [OSTI]

    Dedrick, Jason; Kraemer, Kenneth L.

    2011-01-01T23:59:59.000Z

    of manufacturing. April 18. Wind Directions (2007). SupplyJan/Feb. 27-34. Appendix. Illustrative wind supply chainValue capture n.a. Source: Wind Directions, 2007; authors

  19. Policy learning : new challenges for smart value capture in Colombia

    E-Print Network [OSTI]

    Acosta, Patricia, S.M. Massachusetts Institute of Technology

    2008-01-01T23:59:59.000Z

    Contribucion por Valorizacion is a form of value capture similar to Special Assessment, used in Colombia to complement Local revenues for major public infrastructure programs. SA's continued use countrywide and its resulting ...

  20. Halogenated sulfidohydroboranes for nuclear medicine and boron neutron capture therapy

    DOE Patents [OSTI]

    Miura, Michiko (Hampton Bays, NY); Slatkin, Daniel N. (Southold, NY)

    1997-03-18T23:59:59.000Z

    A method for performing boron neutron capture therapy for the treatment of tumors is disclosed. The method includes administering to a patient an iodinated sulfidohydroborane, a boron-10-containing compound. The site of the tumor is localized by visualizing the increased concentration of the iodine labelled compound at the tumor. The targeted tumor is then irradiated with a beam of neutrons having an energy distribution effective for neutron capture. Destruction of the tumor occurs due to high LET particle irradiation of the tissue secondary to the incident neutrons being captured by the boron-10 nuclei. Iodinated sulfidohydroboranes are disclosed which are especially suitable for the method of the invention. In a preferred embodiment, a compound having the formula Na.sub.4 B.sub.12 I.sub.11 SSB.sub.12 I.sub.11, or another pharmaceutically acceptable salt of the compound, may be administered to a cancer patient for boron neutron capture therapy.

  1. Halogenated sulfidohydroboranes for nuclear medicine and boron neutron capture therapy

    DOE Patents [OSTI]

    Miura, Michiko (Hampton Bays, NY); Slatkin, Daniel N. (Southold, NY)

    1995-10-03T23:59:59.000Z

    A method for performing boron neutron capture therapy for the treatment of tumors is disclosed. The method includes administering to a patient an iodinated sulfidohydroborane, a boron-10-containing compound. The site of the tumor is localized by visualizing the increased concentration of the iodine labelled compound at the tumor. The targeted tumor is then irradiated with a beam of neutrons having an energy distribution effective for neutron capture. Destruction of the tumor occurs due to high LET particle irradiation of the tissue secondary to the incident neutrons being captured by the boron-10 nuclei. Iodinated sulfidohydroboranes are disclosed which are especially suitable for the method of the invention. In a preferred embodiment, a compound having the formula Na.sub.4 B.sub.12 I.sub.11 SSB.sub.12 I.sub.11, or another pharmaceutically acceptable salt of the compound, may be administered to a cancer patient for boron neutron capture therapy.

  2. Halogenated sulfidohydroboranes for nuclear medicine and boron neutron capture therapy

    DOE Patents [OSTI]

    Miura, Michiko (Hampton Bays, NY); Slatkin, Daniel N. (Southold, NY)

    1997-08-05T23:59:59.000Z

    A method for performing boron neutron capture therapy for the treatment of tumors is disclosed. The method includes administering to a patient an iodinated sulfidohydroborane, a boron-10-containing compound. The site of the tumor is localized. by visualizing the increased concentration of the iodine labelled compound at the tumor. The targeted tumor is then irradiated with a beam of neutrons having an energy distribution effective for neutron capture. Destruction of the tumor occurs due to high LET particle irradiation of the tissue secondary to the incident neutrons being captured by the boron-10 nuclei. Iodinated sulfidohydroboranes are disclosed which are especially suitable for the method of the invention. In a preferred embodiment, a compound having the formula Na.sub.4 B.sub.12 I.sub.11 SSB.sub.12 I.sub.11, or another pharmaceutically acceptable salt of the compound, may be administered to a cancer patient for boron neutron capture therapy.

  3. Perspectives on Carbon Capture and Sequestration in the United States

    E-Print Network [OSTI]

    Wong-Parodi, Gabrielle

    2011-01-01T23:59:59.000Z

    E A and Keith D W 1998 Fossil fuels without CO 2 emissionsCapture and Storage from Fossil Fuel Use,” contribution toIPCC) is established • Fossil-fuel and other U.S. industries

  4. Bioinspired Multivalent DNA Network for Capture and Release of Cells

    E-Print Network [OSTI]

    Zhao, Weian

    Capture and isolation of flowing cells and particulates from body fluids has enormous implications in diagnosis, monitoring, and drug testing, yet monovalent adhesion molecules used for this purpose result in inefficient ...

  5. CO? compression for capture-enabled power systems

    E-Print Network [OSTI]

    Suri, Rajat

    2009-01-01T23:59:59.000Z

    The objective of this thesis is to evaluate a new carbon dioxide compression technology - shock compression - applied specifically to capture-enabled power plants. Global warming has increased public interest in carbon ...

  6. Femto-photography: capturing and visualizing the propagation of light

    E-Print Network [OSTI]

    Velten, Andreas

    We present femto-photography, a novel imaging technique to capture and visualize the propagation of light. With an effective exposure time of 1.85 picoseconds (ps) per frame, we reconstruct movies of ultrafast events at ...

  7. Ownership of Carbon Dioxide Captured by Clean Coal Project (Texas)

    Broader source: Energy.gov [DOE]

    This legislation stipulates that the Railroad Commission of Texas automatically acquires the title to any carbon dioxide captured by a clean coal project in the state. The Bureau of Economic...

  8. Halogenated sulfidohydroboranes for nuclear medicine and boron neutron capture therapy

    DOE Patents [OSTI]

    Miura, M.; Slatkin, D.N.

    1997-08-05T23:59:59.000Z

    A method for performing boron neutron capture therapy for the treatment of tumors is disclosed. The method includes administering to a patient an iodinated sulfidohydroborane, a boron-10-containing compound. The site of the tumor is localized by visualizing the increased concentration of the iodine labelled compound at the tumor. The targeted tumor is then irradiated with a beam of neutrons having an energy distribution effective for neutron capture. Destruction of the tumor occurs due to high LET particle irradiation of the tissue secondary to the incident neutrons being captured by the boron-10 nuclei. Iodinated sulfidohydroboranes are disclosed which are especially suitable for the method of the invention. In a preferred embodiment, a compound having the formula Na{sub 4}B{sub 12}I{sub 11}SSB{sub 12}I{sub 11}, or another pharmaceutically acceptable salt of the compound, may be administered to a cancer patient for boron neutron capture therapy. 1 fig.

  9. Halogenated sulfidohydroboranes for nuclear medicine and boron neutron capture therapy

    DOE Patents [OSTI]

    Miura, M.; Slatkin, D.N.

    1997-03-18T23:59:59.000Z

    A method for performing boron neutron capture therapy for the treatment of tumors is disclosed. The method includes administering to a patient an iodinated sulfidohydroborane, a boron-10-containing compound. The site of the tumor is localized by visualizing the increased concentration of the iodine labelled compound at the tumor. The targeted tumor is then irradiated with a beam of neutrons having an energy distribution effective for neutron capture. Destruction of the tumor occurs due to high LET particle irradiation of the tissue secondary to the incident neutrons being captured by the boron-10 nuclei. Iodinated sulfidohydroboranes are disclosed which are especially suitable for the method of the invention. In a preferred embodiment, a compound having the formula Na{sub 4}B{sub 12}I{sub 11}SSB{sub 12}I{sub 11}, or another pharmaceutically acceptable salt of the compound, may be administered to a cancer patient for boron neutron capture therapy. 1 fig.

  10. Halogenated sulfidohydroboranes for nuclear medicine and boron neutron capture therapy

    DOE Patents [OSTI]

    Miura, M.; Slatkin, D.N.

    1995-10-03T23:59:59.000Z

    A method for performing boron neutron capture therapy for the treatment of tumors is disclosed. The method includes administering to a patient an iodinated sulfidohydroborane, a boron-10-containing compound. The site of the tumor is localized by visualizing the increased concentration of the iodine labelled compound at the tumor. The targeted tumor is then irradiated with a beam of neutrons having an energy distribution effective for neutron capture. Destruction of the tumor occurs due to high LET particle irradiation of the tissue secondary to the incident neutrons being captured by the boron-10 nuclei. Iodinated sulfidohydroboranes are disclosed which are especially suitable for the method of the invention. In a preferred embodiment, a compound having the formula Na{sub 4}B{sub 12}I{sub 11}SSB{sub 12}I{sub 11}, or another pharmaceutically acceptable salt of the compound, may be administered to a cancer patient for boron neutron capture therapy. 1 fig.

  11. Computational aspects of treatment planning for neutron capture therapy

    E-Print Network [OSTI]

    Albritton, James Raymond, 1977-

    2010-01-01T23:59:59.000Z

    Boron Neutron Capture Therapy (BNCT) is a biochemically targeted form of binary radiation therapy that has the potential to deliver radiation to cancers with cellular dose selectivity. Accurate and efficient treatment ...

  12. Findings and Recommendations by the California Carbon Capture and Storage Review Panel

    E-Print Network [OSTI]

    Sequestration Partnership #12;Findings and Recommendations by the California Carbon Capture and Storage ReviewFindings and Recommendations by the California Carbon Capture and Storage Review Panel December............................................................................1 Creation of the Carbon Capture and Storage Review Panel

  13. Conceptual Design of Optimized Fossil Energy Systems with Capture and Sequestration of Carbon Dioxide

    E-Print Network [OSTI]

    Ogden, Joan

    2004-01-01T23:59:59.000Z

    of Fossil Hydrogen Energy Systems with Carbon Capture andThe Implications Of New Carbon Capture And SequestrationW H SAMMIS WILLOW ISLAND TOTAL Carbon capture In the plant

  14. Borehole EM Monitoring at Aquistore: Final Report to the Carbon Capture Project (CCP)

    E-Print Network [OSTI]

    Daley, T.

    2014-01-01T23:59:59.000Z

    Report  to  Carbon Capture Project, Lawrence Berkeley Final Report to the Carbon Capture Project (CCP)  Thomas part of a program  of  carbon  capture  and storage  (CCS) 

  15. Economic and energetic analysis of capturing CO[subscript 2] from ambient air

    E-Print Network [OSTI]

    House, Kurt Zenz

    Capturing carbon dioxide from the atmosphere (“air capture”) in an industrial process has been proposed as an option for stabilizing global CO[subscript 2] concentrations. Published analyses suggest these air capture systems ...

  16. Motion dazzle and the effects of target patterning on capture success

    E-Print Network [OSTI]

    Hughes, Anna E.; Troscianko, Jolyon; Stevens, Martin

    2014-09-13T23:59:59.000Z

    capture, but are not uniquely difficult to catch, with luminance matched grey targets also showing a similar capture rate. We show that key factors in making capture easier are a lack of average background luminance matching and having trackable ‘features...

  17. Compression station key to Texas pipeline project

    SciTech Connect (OSTI)

    NONE

    1996-10-01T23:59:59.000Z

    This was probably the largest pipeline project in the US last year, and the largest in Texas in the last decade. The new compressor station is a key element in this project. TECO, its servicing dealer, and compression packager worked closely throughout the planning and installation stages of the project. To handle the amount of gas required, TECO selected the GEMINI F604-1 compressor, a four-throw, single-stage unit with a six-inch stroke manufactured by Weatherford Enterra Compression Co. (WECC) in Corpus Christi, TX. TECO also chose WECC to package the compressors. Responsibility for ongoing support of the units will be shared among TECO, the service dealer and the packager. TECO is sending people to be trained by WECC, and because the G3600 family of engines is still relatively new, both the Caterpillar dealer and WECC sent people for advanced training at Caterpillar facilities in Peoria, IL. As part of its service commitment to TECO, the servicing dealer drew up a detailed product support plan, encompassing these five concerns: Training, tooling; parts support; service support; and commissioning.

  18. Radiative Neutron Capture on Carbon-14 in Effective Field Theory

    E-Print Network [OSTI]

    Gautam Rupak; Lakma Fernando; Akshay Vaghani

    2012-04-19T23:59:59.000Z

    The cross section for radiative capture of neutron on carbon-14 is calculated using the model-independent formalism of halo effective field theory. The dominant contribution from E1 transition is considered, and the cross section is expressed in terms of elastic scattering parameters of the effective range expansion. Contributions from both resonant and non-resonant interaction are calculated. Significant interference between these leads to a capture contribution that deviates from simple Breit-Wigner resonance form.

  19. Recoilless Resonant Capture of Antineutrinos from Tritium Decay

    E-Print Network [OSTI]

    R. S. Raghavan

    2006-09-13T23:59:59.000Z

    Monoenergetic antineutrinos emitted in the bound state beta-decay of H can be resonantly captured in 3He. Favorable conditions are offered by tritide technology for ultra sharp recoilless resonant capture of the 18.6 keV nubare with sigma~5x10-32 cm2, 11 orders of magnitude larger than sigma(nubare +p). The gravitational red shift of neutrinos and the mixing angle theta13 may be measurable in bench scale baselines.

  20. Radiative Neutron Capture on Carbon-14 in Effective Field Theory

    E-Print Network [OSTI]

    Rupak, Gautam; Vaghani, Akshay

    2012-01-01T23:59:59.000Z

    The cross section for radiative capture of neutron on carbon-14 is calculated using the model-independent formalism of halo effective field theory. The dominant contribution from E1 transition is considered, and the cross section is expressed in terms of elastic scattering parameters of the effective range expansion. Contributions from both resonant and non-resonant interaction are calculated. Significant interference between these leads to a capture contribution that deviates from simple Breit-Wigner resonance form.

  1. Better Enzymes for Carbon Capture: Low-Cost Biological Catalyst to Enable Efficient Carbon Dioxide Capture

    SciTech Connect (OSTI)

    None

    2010-07-01T23:59:59.000Z

    IMPACCT Project: Codexis is developing new and efficient forms of enzymes known as carbonic anhydrases to absorb CO2 more rapidly and under challenging conditions found in the gas exhaust of coal-fired power plants. Carbonic anhydrases are common and are among the fastest enzymes, but they are not robust enough to withstand the harsh environment found in the power plant exhaust steams. In this project, Codexis will be using proprietary technology to improve the enzymes’ ability to withstand high temperatures and large swings in chemical composition. The project aims to develop a carbon-capture process that uses less energy and less equipment than existing approaches. This would reduce the cost of retrofitting today’s coal-fired power plants.

  2. Solar-Assisted Electric Vehicle Charging Station Interim Report

    SciTech Connect (OSTI)

    Lapsa, Melissa Voss [ORNL; Durfee, Norman [ORNL; Maxey, L Curt [ORNL; Overbey, Randall M [ORNL

    2011-09-01T23:59:59.000Z

    Oak Ridge National Laboratory (ORNL) has been awarded $6.8 million in the Department of Energy (DOE) American Recovery and Reinvestment Act (ARRA) funds as part of an overall $114.8 million ECOtality grant with matching funds from regional partners to install 125 solar-assisted Electric Vehicle (EV) charging stations across Knoxville, Nashville, Chattanooga, and Memphis. Significant progress has been made toward completing the scope with the installation of 25 solar-assisted charging stations at ORNL; six stations at Electric Power Research Institute (EPRI); and 27 stations at Nissan's Smyrna and Franklin sites, with three more stations under construction at Nissan's new lithium-ion battery plant. Additionally, the procurement process for contracting the installation of 34 stations at Knoxville, the University of Tennessee Knoxville (UTK), and Nashville sites is underway with completion of installation scheduled for early 2012. Progress is also being made on finalizing sites and beginning installations of 30 stations in Nashville, Chattanooga, and Memphis by EPRI and Tennessee Valley Authority (TVA). The solar-assisted EV charging station project has made great strides in fiscal year 2011. A total of 58 solar-assisted EV parking spaces have been commissioned in East and Middle Tennessee, and progress on installing the remaining 67 spaces is well underway. The contract for the 34 stations planned for Knoxville, UTK, and Nashville should be underway in October with completion scheduled for the end of March 2012; the remaining three Nissan stations are under construction and scheduled to be complete in November; and the EPRI/TVA stations for Chattanooga, Vanderbilt, and Memphis are underway and should be complete by the end of March 2012. As additional Nissan LEAFs are being delivered, usage of the charging stations has increased substantially. The project is on course to complete all 125 solar-assisted EV charging stations in time to collect meaningful data by the end of government fiscal year 2012. Lessons learned from the sites completed thus far are being incorporated and are proving to be invaluable in completion of the remaining sites.

  3. Optimal Design of a Fossil Fuel-Based Hydrogen Infrastructure with Carbon Capture and Sequestration: Case Study in Ohio

    E-Print Network [OSTI]

    Johnson, Nils; Yang, Christopher; Ni, Jason; Johnson, Joshua; Lin, Zhenhong; Ogden, Joan M

    2005-01-01T23:59:59.000Z

    Infrastructure with Carbon Capture and Sequestration: CaseINFRASTRUCTURE WITH CARBON CAPTURE AND SEQUESTRATION: CASEhydrogen production with carbon capture and sequestration,

  4. Conceptual Design of a Fossil Hydrogen Infrastructure with Capture and Sequestration of Carbon Dioxide: Case Study in Ohio

    E-Print Network [OSTI]

    2005-01-01T23:59:59.000Z

    ANNUAL CONFERENCE ON CARBON CAPTURE AND SEQUESTRATION DOE/energy systems with carbon capture and sequestration. Insources. Fossil H 2 with carbon capture and sequestration (

  5. Worker safety in a mature carbon capture and storage industry in the United States based upon analog industry experience

    E-Print Network [OSTI]

    Jordan, P.D.

    2014-01-01T23:59:59.000Z

    attributable to carbon capture and storage in 2050.safety in a mature carbon capture and storage industry insafety in a mature carbon capture and storage (CCS) industry

  6. Comparative Assessment of Status and Opportunities for CO2 Capture and Storage and Radioactive Waste Disposal in North America

    E-Print Network [OSTI]

    Oldenburg, C.

    2010-01-01T23:59:59.000Z

    and liability for carbon capture and sequestration, Environ.Wilson and Gerard, editors, Carbon Capture and SequestrationSpecial Report on carbon dioxide capture and storage, ISBN

  7. Design of high pressure metering and regulating stations

    SciTech Connect (OSTI)

    Rehler, D.A. [Oklahoma Natural Gas Co., Enid, OK (United States)

    1995-12-01T23:59:59.000Z

    Metering and regulating stations effectively serve as the cash registers of the natural gas industry. While the potential for lost revenue resulting from improper design is a serious consideration, it is not the only one. The potential exists for problems such as excessive noise levels, inaccurate reflection of lost and unaccounted-for gas, and numerous potentially hazardous situations. The best time to limit the potential for problems is during the design process. This, together with the critical nature of these stations, dictates that proper design is imperative. Proper design of metering and regulating stations is a constantly changing and extremely complicated subject. There are virtually an infinite number of situations that the designer can encounter in evaluating his design. In view of this, it is impossible to develop a cookbook method of designing these stations that covers all possible situations. The emphasis of this paper is to briefly touch on the major aspects of metering and regulating station design. Steps involved in station design are: 1. Collection of data on the proposed station. 2. Determination of piping configuration. 3. Selection of measurement equipment. 4. Selection of pressure regulating and overpressure protection equipment. 5. Communication of the final design to field personnel.

  8. New Directions: Potential Climate and Productivity Benefits from CO2 Capture in Commercial Buildings

    E-Print Network [OSTI]

    Gall, Elliott T; Nazaroff, William W

    2015-01-01T23:59:59.000Z

    air capture technologies. Although the carbon in metaboliccarbon footprint of commercial build- ings through active CO 2 capture. For dilute CO 2 levels, adsorption technologies

  9. Motion Capture Based Animation for Virtual Human Demonstrators: Modeling, Parameterization and Planning

    E-Print Network [OSTI]

    Huang, Yazhou

    2012-01-01T23:59:59.000Z

    sive gaze animation for virtual humans. ” In Proceedings ofCapture Based Animation for Virtual Human Demonstrators:Capture Based Animation for Virtual Human Demonstrators:

  10. Employing Clustering for Assisting Source Code Maintainability Evaluation according to ISO/IEC-

    E-Print Network [OSTI]

    Tjortjis, Christos

    Employing Clustering for Assisting Source Code Maintainability Evaluation according to ISO/IEC according to the ISO/IEC-9126 quality standard. More specifically it proposes a methodology that combines maintenance activities [2], [14], [18]. According to ISO/IEC-9126, maintainability is the capability

  11. OPTIMIZING PERFORMANCE OF THE HESKETT STATION

    SciTech Connect (OSTI)

    Michael D. Mann; Ann K. Henderson

    1999-03-01T23:59:59.000Z

    The overall conclusion from this work is that a switch from river sand bed material to limestone at the R.M. Heskett Station would provide substantial benefits to MDU. A switch to limestone would increase the fuel flexibility of the unit, allowing fuels higher in both sodium and sulfur to be burned. The limestone bed can tolerate a much higher buildup of sodium in the bed without agglomeration, allowing either the bed turnover rate to be reduced to half the current sand feed rate for a fuel with equivalent sodium or allow a higher sodium fuel to be burned with limestone feed rates equivalent to the current sand feed rate. Both stack and ambient SO{sub 2} emissions can be controlled. A small improvement in boiler efficiency should be achievable by operating at lower excess oxygen levels at low load. This reduction in oxygen will also lower NO{sub x} emissions, providing a margin of safety for meeting emission standards. No detrimental effects of using limestone at the Heskett Station were uncovered as a result of the test burn. Some specific conclusions from this work include the following: The bed material feed rate can be reduced from the current rate of 5.4% of the coal feed rate (57.4 tons of sand/day) to 2.5% of the coal feed rate (27 tons of limestone/day). This will result in an annual savings of approximately $200,000. (1) SO{sub 2} emissions at the recommended feed rate would be approximately 250 ppm (0.82 lb/MMBtu) using a similar lignite. Based on the cost of the limestones, SO{sub 2} allowances could be generated at a cost of $60/ton SO{sub 2} , leaving a large profit margin for the sale of allowances. The addition of limestone at the same rate currently used for sand feed could generate $455,000 net income if allowances are sold at $200/ton SO2 . (2) At full-load operation, unburned carbon losses increase significantly at excess oxygen levels below 2.8%. No efficiency gains are expected at high-load operation by switching from sand to limestone. By reducing the oxygen level at low load to 8.5%, an efficiency gain of approximately 1.2% could be realized, equating to $25,000 to $30,000 in annual savings. (3) A reduction of 25 tons/day total ash (bed material plus fly ash) will be realized by using limestone at the recommended feed rate compared to the current sand feed rate. No measurable change in volume would be realized because of the lower bulk density of the limestone-derived material.

  12. Bridging the Gap Between Transportation and Stationary Power: Hydrogen Energy Stations and their Implications for the Transportation Sector

    E-Print Network [OSTI]

    Weinert, Jonathan X.; Lipman, Timothy; Unnasch, Stephen

    2005-01-01T23:59:59.000Z

    Economic Analysis of Hydrogen Energy Station Concepts,E 2 Four Potential Types of Hydrogen Energy Stations VehicleOperational Toronto Hydrogen Energy Station Stationary PEMFC

  13. Buried waste integrated demonstration human engineered control station. Final report

    SciTech Connect (OSTI)

    Not Available

    1994-09-01T23:59:59.000Z

    This document describes the Human Engineered Control Station (HECS) project activities including the conceptual designs. The purpose of the HECS is to enhance the effectiveness and efficiency of remote retrieval by providing an integrated remote control station. The HECS integrates human capabilities, limitations, and expectations into the design to reduce the potential for human error, provides an easy system to learn and operate, provides an increased productivity, and reduces the ultimate investment in training. The overall HECS consists of the technology interface stations, supporting engineering aids, platform (trailer), communications network (broadband system), and collision avoidance system.

  14. Capture Gamma-Ray Libraries for Nuclear Applications

    SciTech Connect (OSTI)

    Sleaford, B.W.; Firestone, Richard B.; Summers, N.; Escher, J.; Hurst, A.; Krticka, M.; Basunia, S.; Molnar, G.; Belgya, T.; Revay, Z.; Choi, H.D.

    2010-05-01T23:59:59.000Z

    The neutron capture reaction is useful in identifying and analyzing the gamma-ray spectrum from an unknown assembly as it gives unambiguous information on its composition. This can be done passively or actively where an external neutron source is used to probe an unknown assembly. There are known capture gamma-ray data gaps in the ENDF libraries used by transport codes for various nuclear applications. The Evaluated Gamma-ray Activation file (EGAF) is a new thermal neutron capture database of discrete line spectra and cross sections for over 260 isotopes that was developed as part of an IAEA Coordinated Research Project. EGAF has been used to improve the capture gamma production in ENDF libraries. For medium to heavy nuclei the quasi continuum contribution to the gamma cascades is not experimentally resolved. The continuum contains up to 90percent of all the decay energy an is modeled here with the statistical nuclear structure code DICEBOX. This code also provides a consistency check of the level scheme nuclear structure evaluation. The calculated continuum is of sufficient accuracy to include in the ENDF libraries. This analysis also determines new total thermal capture cross sections and provides an improved RIPL database. For higher energy neutron capture there is less experimental data available making benchmarking of the modeling codes more difficult. We use CASINO, a version of DICEBOX that is modified for this purpose. This can be used to simulate the neutron capture at incident neutron energies up to 20 MeV to improve the gamma-ray spectrum in neutron data libraries used for transport modelling of unknown assemblies.

  15. Membrane-based systems for carbon capture and hydrogen purification

    SciTech Connect (OSTI)

    Berchtold, Kathryn A [Los Alamos National Laboratory

    2010-11-24T23:59:59.000Z

    This presentation describes the activities being conducted at Los Alamos National Laboratory to develop carbon capture technologies for power systems. This work is aimed at continued development and demonstration of a membrane based pre- and post-combustion carbon capture technology and separation schemes. Our primary work entails the development and demonstration of an innovative membrane technology for pre-combustion capture of carbon dioxide that operates over a broad range of conditions relevant to the power industry while meeting the US DOE's Carbon Sequestration Program goals of 90% CO{sub 2} capture at less than a 10% increase in the cost of energy services. Separating and capturing carbon dioxide from mixed gas streams is a first and critical step in carbon sequestration. To be technically and economically viable, a successful separation method must be applicable to industrially relevant gas streams at realistic temperatures and pressures as well as be compatible with large gas volumes. Our project team is developing polymer membranes based on polybenzimidazole (PBI) chemistries that can purify hydrogen and capture CO{sub 2} at industrially relevant temperatures. Our primary objectives are to develop and demonstrate polymer-based membrane chemistries, structures, deployment platforms, and sealing technologies that achieve the critical combination of high selectivity, high permeability, chemical stability, and mechanical stability all at elevated temperatures (> 150 C) and packaged in a scalable, economically viable, high area density system amenable to incorporation into an advanced Integrated Gasification Combined-Cycle (IGCC) plant for pre-combustion CO{sub 2} capture. Stability requirements are focused on tolerance to the primary synthesis gas components and impurities at various locations in the IGCC process. Since the process stream compositions and conditions (temperature and pressure) vary throughout the IGCC process, the project is focused on the optimization of a technology that could be positioned upstream or downstream of one or more of the water-gas-shift reactors (WGSRs) or integrated with a WGSR.

  16. SOARCA Peach Bottom Atomic Power Station Long-Term Station Blackout Uncertainty Analysis: Knowledge Advancement.

    SciTech Connect (OSTI)

    Gauntt, Randall O.; Mattie, Patrick D.; Bixler, Nathan E.; Ross, Kyle; Cardoni, Jeffrey N; Kalinich, Donald A.; Osborn, Douglas M.; Sallaberry, Cedric Jean-Marie; Ghosh, S. Tina

    2014-02-01T23:59:59.000Z

    This paper describes the knowledge advancements from the uncertainty analysis for the State-of- the-Art Reactor Consequence Analyses (SOARCA) unmitigated long-term station blackout accident scenario at the Peach Bottom Atomic Power Station. This work assessed key MELCOR and MELCOR Accident Consequence Code System, Version 2 (MACCS2) modeling uncertainties in an integrated fashion to quantify the relative importance of each uncertain input on potential accident progression, radiological releases, and off-site consequences. This quantitative uncertainty analysis provides measures of the effects on consequences, of each of the selected uncertain parameters both individually and in interaction with other parameters. The results measure the model response (e.g., variance in the output) to uncertainty in the selected input. Investigation into the important uncertain parameters in turn yields insights into important phenomena for accident progression and off-site consequences. This uncertainty analysis confirmed the known importance of some parameters, such as failure rate of the Safety Relief Valve in accident progression modeling and the dry deposition velocity in off-site consequence modeling. The analysis also revealed some new insights, such as dependent effect of cesium chemical form for different accident progressions. (auth)

  17. Tri-Generation Success Story: World's First Tri-Gen EnergyStation...

    Energy Savers [EERE]

    Energy Department, the Fountain Valley energy station is the world's first tri-generation hydrogen energy and electrical power station to provide transportation fuel to the public...

  18. Survey Results and Analysis of the Cost and Efficiency of Various Operating Hydrogen Fueling Stations

    SciTech Connect (OSTI)

    Cornish, John

    2011-03-05T23:59:59.000Z

    Existing Hydrogen Fueling Stations were surveyed to determine capital and operational costs. Recommendations for cost reduction in future stations and for research were developed.

  19. Fact #874: May 25, 2015 Number of Electric Stations and Electric...

    Energy Savers [EERE]

    74: May 25, 2015 Number of Electric Stations and Electric Charging Units Increasing - Dataset Fact 874: May 25, 2015 Number of Electric Stations and Electric Charging Units...

  20. Strategy for international cooperation in planning the Chinese Space Station

    E-Print Network [OSTI]

    Foley, Jordan J. (Jordan James)

    2014-01-01T23:59:59.000Z

    After ten years of planning and pre-development, the Chinese government approved the space station project on September 25, 2010. In October 2010, the People's Republic of China (PRC) officially announced its independent ...

  1. College Station Utilities- Residential Energy Back II Rebate Program

    Broader source: Energy.gov [DOE]

    College Station Utilities offers an incentive for residential customers to install energy efficient HVAC equipment through the Energy Back II Program. To qualify for the rebate, the A/C system...

  2. Niwot Ridge CRN Station Up & On-Line.

    E-Print Network [OSTI]

    Niwot Ridge CRN Station Up & On-Line. I made a decision after the Science Panel Review to put tree removal Wind Speed 3, terrain elevation change Solar Radiation 3, solar shading to west #12;

  3. Development of a Turnkey Hydrogen Fueling Station Final Report

    SciTech Connect (OSTI)

    David E. Guro; Edward Kiczek; Kendral Gill; Othniel Brown

    2010-07-29T23:59:59.000Z

    The transition to hydrogen as a fuel source presents several challenges. One of the major hurdles is the cost-effective production of hydrogen in small quantities (less than 1MMscf/month). In the early demonstration phase, hydrogen can be provided by bulk distribution of liquid or compressed gas from central production plants; however, the next phase to fostering the hydrogen economy will likely include onsite generation and extensive pipeline networks to help effect a pervasive infrastructure. Providing inexpensive hydrogen at a fleet operator’s garage or local fueling station is a key enabling technology for direct hydrogen Fuel Cell Vehicles (FCVs). The objective of this project was to develop a comprehensive, turnkey, stand-alone, commercial hydrogen fueling station for FCVs with state-of-the-art technology that is cost-competitive with current hydrocarbon fuels. Such a station would promote the advent of the hydrogen fuel economy for buses, fleet vehicles, and ultimately personal vehicles. Air Products, partnering with the U.S. Department of Energy (DOE), The Pennsylvania State University, Harvest Energy Technology, and QuestAir, developed a turnkey hydrogen fueling station on the Penn State campus. Air Products aimed at designing a station that would have 65% overall station efficiency, 82% PSA (pressure swing adsorption) efficiency, and the capability of producing hydrogen at $3.00/kg (gge) H2 at mass production rates. Air Products designed a fueling station at Penn State from the ground up. This project was implemented in three phases. The first phase evaluated the various technologies available in hydrogen generation, compression, storage, and gas dispensing. In the second phase, Air Products designed the components chosen from the technologies examined. Finally, phase three entailed a several-month period of data collection, full-scale operation, maintenance of the station, and optimization of system reliability and performance. Based on field data analysis, it was determined by a proprietary hydrogen-analysis model that hydrogen produced from the station at a rate of 1500 kg/day and when produced at 1000 stations per year would be able to deliver hydrogen at a price of $3.03/kg (gge) H2. The station’s efficiency was measured to be 65.1%, and the PSA was tested and ran at an efficiency of 82.1%, thus meeting the project targets. From the study, it was determined that more research was needed in the area of hydrogen fueling. The overall cost of the hydrogen energy station, when combined with the required plot size for scaled-up hydrogen demands, demonstrated that a station using steam methane reforming technology as a means to produce on–site hydrogen would have limited utility in the marketplace. Alternative hydrogen supplies, such as liquid or pipeline delivery to a refueling station, need to be included in the exploration of alternative energy site layouts. These avenues need to be explored before a definitive refueling station configuration and commercialization pathway can be determined.

  4. Where the Rubber Meets the Road -- the Alternative Fuel Station...

    Broader source: Energy.gov (indexed) [DOE]

    Road -- the Alternative Fuel Station Locator August 10, 2010 - 2:32pm Addthis Dennis A. Smith Director, National Clean Cities Last week, this blog highlighted the highly efficient...

  5. Optimal command generation for maneuvering the space station

    E-Print Network [OSTI]

    Bryson, Amy Louise

    2001-01-01T23:59:59.000Z

    The objective of this research is to obtain near minimum-fuel and minimum-time maneuver commands for large-angle maneuvers for the international space station. Attitude and angular velocity waypoints are generated using the method of differential...

  6. Enhancing the energy efficiency of radio base stations 

    E-Print Network [OSTI]

    Holtkamp, Hauke Andreas

    2014-06-30T23:59:59.000Z

    This thesis is concerned with the energy efficiency of cellular networks. It studies the dominant power consumer in future cellular networks, the Long Term Evolution (LTE) radio Base Station (BS), and proposes mechanisms ...

  7. New tool predicts economic impacts of natural gas stations |...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    announced a new tool today for analyzing the economic impacts of building new compressed natural gas fueling stations. Called JOBS NG, the tool is freely available to the public....

  8. The CNGS Target Station Presented by L.Bruno

    E-Print Network [OSTI]

    McDonald, Kirk

    sealed system filled with 0.5 bar of He. The tube has annular fins to enhance convective heat transfer enclosure Inlet target Inlet fixed shielding Outlet Beam #12;The target Assembly The CNGS Target Station as

  9. Effective Load Management for the City of College Station

    E-Print Network [OSTI]

    Hecox, O. D.; Bauer, V.

    1985-01-01T23:59:59.000Z

    A successful electrical demand management program for the City of College Station in 1984 employed techniques proven in the industrial and commercial sectors that have seldom been used at the community level. The program, with technical assistance...

  10. air station whidbey: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    on Soil Organic Matter and Nutrient Levels Clain Jones, Perry Lawrence, Rick L. 47 OF CAR SHARING STATIONS CiteSeer Summary: Approximately half of the worlds population is...

  11. automatic interplanetary station: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    A; Pantellini, F; Meyer-Vernet, N; Belheouane, S; Maksimovic, M 2015-01-01 135 OF CAR SHARING STATIONS CiteSeer Summary: Approximately half of the worlds population is...

  12. air station lemoore: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    on Soil Organic Matter and Nutrient Levels Clain Jones, Perry Lawrence, Rick L. 47 OF CAR SHARING STATIONS CiteSeer Summary: Approximately half of the worlds population is...

  13. arctowski station king: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    using Ranked statistical inference about P(Yusing simple random Omar, Mohammad H. 139 OF CAR SHARING STATIONS CiteSeer Summary: Approximately half of the worlds population is...

  14. australian antarctic station: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    arise from splittings of the natural short exact sequences Ross Street 2004-01-01 219 OF CAR SHARING STATIONS CiteSeer Summary: Approximately half of the worlds population is...

  15. antarctic station casey: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    SOAP for setting up the tetheredsonde All of the Costa Rica REU groups for data 148 OF CAR SHARING STATIONS CiteSeer Summary: Approximately half of the worlds population is...

  16. air force station: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of intensity and the lifespan of certain isotopes. A Siemens Simatic FM-352-5 module controls the Tape Station in a PLC system then a DSC controls the PLC, which will be...

  17. Transfer stations and long-haul transport systems

    SciTech Connect (OSTI)

    Walsh, P.; Pferdehirt, W.; O'Leary, P. (Univ. of Wisconsin, Madison, WI (United States). Solid and Hazardous Waste Education Center)

    1993-12-01T23:59:59.000Z

    Transfer stations can be an important link between pickup at the curb and ultimate disposal, often allowing significant savings in the total costs to move wastes from the generator to the disposal site. A transfer station is simply a facility where collection trucks bring collected materials for loading into larger vehicles and subsequent shipment, usually to a landfill, waste-to-energy plant, or composting facility. Transferred wastes are typically shipped out in large trailers, but barges and railroad cars are also transport options. Although modern transfer stations usually include some provisions for handling recyclables, solid waste transfer dominates the operation of most facilities. Some communities have begun experimenting with transferring commingled, source-separated recyclables to regional processing centers. Transfer facilities can be as simple as a pavement slab and a front-end loader. Alternatively, transfer stations can cost millions of dollars and move thousands of tons of waste each day.

  18. Combustion-Assisted CO2 Capture Using MECC Membranes

    SciTech Connect (OSTI)

    Sherman, Steven R [ORNL; Gray, Dr. Joshua R. [Savannah River National Laboratory (SRNL), Aiken, S.C.; Brinkman, Dr. Kyle S. [Savannah River National Laboratory (SRNL), Aiken, S.C.; Huang, Dr. Kevin [University of South Carolina, Columbia

    2012-01-01T23:59:59.000Z

    Mixed Electron and Carbonate ion Conductor (MECC) membranes have been proposed as a means to separate CO2 from power plant flue gas. Here a modified MECC CO2 capture process is analyzed that supplements retentate pressurization and permeate evacuation as a means to create a CO2 driving force with a process assisted by the catalytic combustion of syngas on the permeate side of the membrane. The combustion reactions consume transported oxygen, making it unavailable for the backwards transport reaction. With this change, the MECC capture system becomes exothermic, and steam for electricity production may be generated from the waste heat. Greater than 90% of the CO2 in the flue gas may be captured, and a compressed CO2 product stream is produced. A fossil-fueled power plant using this process would consume 14% more fuel per unit electricity produced than a power plant with no CO2 capture system, and has the potential to meet U.S. DOE s goal that deployment of a CO2 capture system at a fossil-fueled power plant should not increase the cost of electricity from the combined facility by more than 30%.

  19. NUCLEAR POWERED CO2 CAPTURE FROM THE ATMOSPHERE

    SciTech Connect (OSTI)

    Sherman, S

    2008-09-22T23:59:59.000Z

    A process for capturing CO{sub 2} from the atmosphere was recently proposed. This process uses a closed cycle of sodium and calcium hydroxide, carbonate, and oxide transformations to capture dilute CO{sub 2} from the atmosphere and to generate a concentrated stream of CO{sub 2} that is amenable to sequestration or subsequent chemical transformations. In one of the process steps, a fossil-fueled lime kiln is needed, which reduces the net CO{sub 2} capture of the process. It is proposed to replace the fossil-fueled lime kiln with a modified kiln heated by a high-temperature nuclear reactor. This will have the effect of eliminating the use of fossil fuels for the process and increasing the net CO{sub 2} capture. Although the process is suitable to support sequestration, the use of a nuclear power source for the process provides additional capabilities, and the captured CO{sub 2} may be combined with nuclear-produced hydrogen to produce liquid fuels via Fischer-Tropsch synthesis or other technologies. Conceivably, such plants would be carbon-neutral, and could be placed virtually anywhere without being tied to fossil fuel sources or geological sequestration sites.

  20. COMBUSTION-ASSISTED CO2 CAPTURE USING MECC MEMBRANES

    SciTech Connect (OSTI)

    Brinkman, K.; Gray, J.

    2012-03-30T23:59:59.000Z

    Mixed Electron and Carbonate ion Conductor (MECC) membranes have been proposed as a means to separate CO{sub 2} from power plant flue gas. Here a modified MECC CO{sub 2} capture process is analyzed that supplements retentate pressurization and permeate evacuation as a means to create a CO{sub 2} driving force with a process assisted by the catalytic combustion of syngas on the permeate side of the membrane. The combustion reactions consume transported oxygen, making it unavailable for the backwards transport reaction. With this change, the MECC capture system becomes exothermic, and steam for electricity production may be generated from the waste heat. Greater than 90% of the CO{sub 2} in the flue gas may be captured, and a compressed CO{sub 2} product stream is produced. A fossil-fueled power plant using this process would consume 14% more fuel per unit electricity produced than a power plant with no CO{sub 2} capture system, and has the potential to meet U.S. DOE's goal that deployment of a CO{sub 2} capture system at a fossil-fueled power plant should not increase the cost of electricity from the combined facility by more than 30%.

  1. Hypervelocity Capture of Meteoritic Particles in Nonsilica Aerogels

    SciTech Connect (OSTI)

    S Jones; G Flynn

    2011-12-31T23:59:59.000Z

    The Stardust mission captured particles from the comet 81P/Wild 2 in gradient density silica aerogel and returned the collected samples to earth in 2006. The analyses of these particles have revealed several new insights into the formation of our solar system. However, since the aerogel used as the capture material was silica, the elemental analyses of the silica-rich particles were made more complicated in certain ways due to the mixing of the silicon of the particles and that of the aerogel. By using a nonsilica aerogel, future elemental analyses of silica-rich particles captured in aerogel could be made more straightforward. Resorcinol/formaldehyde (RF), alumina, and zirconia aerogels were impact tested with meteoritic fragments and the captured fragments were mapped with synchrotron-based X-ray microprobe (XRM) and the particles were analyzed with X-ray fluorescence (XRF). The resorcinol/formaldehyde aerogel proved to be the best capture material, in that it could be keystoned and XRF could be used to locate and analyze particles that were less than 10 {micro}m.

  2. Southwest Region Experiment Station - Final Technical Report

    SciTech Connect (OSTI)

    Rosenthal, A

    2011-08-19T23:59:59.000Z

    Southwest Technology Development Institute (SWTDI), an independent, university-based research institute, has been the operator of the Southwest Region Photovoltaic Experiment Station (SWRES) for almost 30 years. The overarching mission of SWTDI is to position PV systems and solar technologies to become cost-effective, major sources of energy for the United States. Embedded in SWTDI's general mission has been the more-focused mission of the SWRES: to provide value added technical support to the DOE Solar Energy Technologies Program (SETP) to effectively and efficiently meet the R&D needs and targets specified in the SETP Multi-Year Technical Plan. : The DOE/SETP goals of growing U.S. PV manufacturing into giga-watt capacities and seeing tera-watt-hours of solar energy production in the U.S. require an infrastructure that is under development. The staff of the SWRES has supported DOE/SETP through a coherent, integrated program to address infrastructural needs inhibiting wide-scale PV deployment in three major technical categories: specialized engineering services, workforce development, and deployment facilitation. The SWRES contract underwent three major revisions during its five year period-of- performance, but all tasks and deliverables fell within the following task areas: Task 1: PV Systems Assistance Center 1. Develop a Comprehensive multi-year plan 2. Provide technical workforce development materials and workshops for PV stakeholder groups including university, professional installers, inspectors, state energy offices, Federal agencies 3. Serve on the NABCEP exam committee 4. Provide on-demand technical PV system design reviews for U.S. PV stakeholders 5. Provide PV system field testing and instrumentation, technical outreach (including extensive support for the DOE Market Transformation program) Task 2: Design-for-Manufacture PV Systems 1. Develop and install 18 kW parking carport (cost share) and PV-thermal carport (Albuquerque) deriving and publishing lessons learned Task 3: PV Codes and Standards 1. Serve as the national lead for development and preparation of all proposals (related to PV) to the National Electrical Code 2. Participate in the Standards Technical Panels for modules (UL1703) and inverters (UL1741) Task 4: Assess Inverter Long Term Reliability 1. Install and monitor identical inverters at SWRES and SERES 2. Operate and monitor all inverters for 5 years, characterizing all failures and performance trends Task 5: Test and Evaluation Support for Solar America Initiative 1. Provide test and evaluation services to the National Laboratories for stage gate and progress measurements of SAI TPP winners

  3. Large Optic Drying Station: Summary of Dryer Certification Tests

    SciTech Connect (OSTI)

    Barbee, T W; Ayers, S L; Ayers, M J

    2009-08-28T23:59:59.000Z

    The purpose of this document is to outline the methodology used to baseline and maintain the cleanliness status of the newly built and installed Large Optic Cleaning Station (LOCS). The station has currently been in use for eleven months; and after many cleaning studies and implementation of resulting improvements appears to be cleaning optics to a level that is acceptable for the fabrication of Nano-Laminates.

  4. Supported polyethylenimine adsorbents for CO2 capture from flue gas

    SciTech Connect (OSTI)

    Fauth, D.J.; Gray, M.L.; Pennline, H.W.

    2008-10-01T23:59:59.000Z

    Anthropogenic CO2 emissions produced from fossil fuel combustion are believed to contribute to undesired consequences in global climate. Major contributors towards CO2 emissions are fossil fuel-fired power plants for electricity production. For this reason, CO2 capture from flue gas streams together with permanent sequestration in geologic formations is being considered a viable solution towards mitigation of the major greenhouse gas1. Technologies based on chemical absorption with alkanolamines have been assessed for first generation CO2 post-combustion capture primarily due to its advanced stage of development. However, limitations associated with these chemical solvents (i.e., low CO2 loadings, amine degradation by oxygen, equipment corrosion) manifest themselves in high capital and operating costs with reduced thermal efficiencies. Therefore, necessary design and development of alternative, lower cost approaches for CO2 capture from coal-fired combustion streams are warranted.

  5. Guidelines for carbon dioxide capture, transport and storage

    SciTech Connect (OSTI)

    Hanson, S.

    2008-07-01T23:59:59.000Z

    The goal of this effort was to develop a set of preliminary guidelines and recommendations for the deployment of carbon capture and storage (CCS) technologies in the United States. The CCS Guidelines are written for those who may be involved in decisions on a proposed project: the developers, regulators, financiers, insurers, project operators, and policymakers. Contents are: Part 1: introduction; Part 2: capture; Part 3: transport; Part 4; storage; Part. 5 supplementary information. Within these parts, eight recommended guidelines are given for: CO{sub 2} capture; ancillary environmental impacts from CO{sub 2}; pipeline design and operation; pipeline safety and integrity; siting CO{sub 2} pipelines; pipeline access and tariff regulation; guidelines for (MMV); risk assessment; financial responsibility; property rights and ownership; site selection and characterisation; injection operations; site closure; and post-closure. 18 figs., 9 tabs., 4 apps.

  6. Wide-Bandwidth Capture of Wire-Scanner Signals

    SciTech Connect (OSTI)

    Gruchalla, Michael E. [Los Alamos National Laboratory; Gilpatrick, John D. [Los Alamos National Laboratory; Sedillo, James Daniel [Los Alamos National Laboratory; Martinez, Derwin [Los Alamos National Laboratory

    2012-05-16T23:59:59.000Z

    Integrated charge collected on the sense wires of wire-scanner systems utilized to determine beam profile is generally the parameter of interest. The LANSCE application requires capturing the charge information macropulse-by-macropulse with macropulse lengths as long as 700 {micro}s at a maximum macropulse rate of 120 Hz. Also, for the LANSCE application, it is required that the integration be performed in a manner that does not require integrator reset between macropulses. Due to the long macropulse which must be accommodated and the 8.33 ms minimum pulse period, a simple R-C integrator cannot be utilized since there is insufficient time between macropulses to allow the integrator to adequately recover. The application of wide analog bandwidth to provide accurate pulse-by-pulse capture of the wire signals with digital integration of the wire signals to determine captured charge at each macropulse in applications with comparatively long macropulses and high pulse repetition rates is presented.

  7. Actuarial risk assessment of expected fatalities attributable to carbon capture and storage in 2050

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    1 Actuarial risk assessment of expected fatalities attributable to carbon capture and storage : 10.1016/j.ijggc.2011.07.004 #12;2 1. Introduction Carbon capture and storage (CCS) involves capturing of carbon and the cost of capture. From the engineering, psychological or climatic point of view, one

  8. Economic and energetic analysis of capturing CO2 from ambient air

    E-Print Network [OSTI]

    Economic and energetic analysis of capturing CO2 from ambient air Kurt Zenz Housea,b,1 , Antonio C for review August 20, 2010) Capturing carbon dioxide from the atmosphere ("air capture") in an industrial suggest these air capture systems may cost a few hundred dollars per tonne of CO2, making it cost

  9. Monte Carlo beam capture and charge breeding simulation

    SciTech Connect (OSTI)

    Kim, J.S.; Liu, C.; Edgell, D.H.; Pardo, R. [FAR-TECH, Inc., 10350 Science Center Drive, San Diego, California 92121 (United States); FAR-TECH, Inc., 10350 Science Center Drive, San Diego, California 92121 (United States) and University of Rochester, Rochester, New York (United States); Argonne National Laboratory, Argonne, Illinois (United States)

    2006-03-15T23:59:59.000Z

    A full six-dimensional (6D) phase space Monte Carlo beam capture charge-breeding simulation code examines the beam capture processes of singly charged ion beams injected to an electron cyclotron resonance (ECR) charge breeder from entry to exit. The code traces injected beam ions in an ECR ion source (ECRIS) plasma including Coulomb collisions, ionization, and charge exchange. The background ECRIS plasma is modeled within the current frame work of the generalized ECR ion source model. A simple sample case of an oxygen background plasma with an injected Ar +1 ion beam produces lower charge breeding efficiencies than experimentally obtained. Possible reasons for discrepancies are discussed.

  10. Method for high temperature mercury capture from gas streams

    DOE Patents [OSTI]

    Granite, E.J.; Pennline, H.W.

    2006-04-25T23:59:59.000Z

    A process to facilitate mercury extraction from high temperature flue/fuel gas via the use of metal sorbents which capture mercury at ambient and high temperatures. The spent sorbents can be regenerated after exposure to mercury. The metal sorbents can be used as pure metals (or combinations of metals) or dispersed on an inert support to increase surface area per gram of metal sorbent. Iridium and ruthenium are effective for mercury removal from flue and smelter gases. Palladium and platinum are effective for mercury removal from fuel gas (syngas). An iridium-platinum alloy is suitable for metal capture in many industrial effluent gas streams including highly corrosive gas streams.

  11. Muon capture for the front end of a muon collider

    SciTech Connect (OSTI)

    Neuffer, D.; /Fermilab; Yoshikawa, C.; /MUONS Inc., Batavia

    2011-03-01T23:59:59.000Z

    We discuss the design of the muon capture front end for a {mu}{sup +}-{mu}{sup -} Collider. In the front end, a proton bunch on a target creates secondary pions that drift into a capture transport channel, decaying into muons. A sequence of rf cavities forms the resulting muon beams into strings of bunches of differing energies, aligns the bunches to (nearly) equal central energies, and initiates ionization cooling. The muons are then cooled and accelerated to high energy into a storage ring for high-energy high luminosity collisions. Our initial design is based on the somewhat similar front end of the International Design Study (IDS) neutrino factory.

  12. Mercury capture by aerosol transformation in combustion environments. Appendix 5

    SciTech Connect (OSTI)

    NONE

    1997-02-01T23:59:59.000Z

    Aerosol transformation of elemental mercury by oxidizing mercury in the air is investigated in this study by varying temperature and residence time. The experimental results show that mercury oxidation is not important at the temperature range and time scale studied. The rate of mercury oxidation is too slow that the capture of mercury vapor by transforming it into mercury oxide in aerosol phase is not practical in real systems. Studies are needed for alternative approaches to capture mercury vapor such as the use of sorbent materials.

  13. Carbon Capture and Storage from Industrial Sources | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page onYouTube YouTube Note: Since the YouTube platformBuilding RemovalCSS Letter -SeptemberWorkshop |CapturingCarbon Capture

  14. Post-Combustion Carbon Capture Research | Department of Energy

    Energy Savers [EERE]

    is located directly above potential geologic sequestration sites according to the Carbon Sequestration Atlas of the United States and Canada. This includes almost 150...

  15. Composite Membranes for CO2 Capture: High Performance Metal Organic Frameworks/Polymer Composite Membranes for Carbon Dioxide Capture

    SciTech Connect (OSTI)

    None

    2010-07-01T23:59:59.000Z

    IMPACCT Project: A team of six faculty members at Georgia Tech are developing an enhanced membrane by fitting metal organic frameworks, compounds that show great promise for improved carbon capture, into hollow fiber membranes. This new material would be highly efficient at removing CO2 from the flue gas produced at coal-fired power plants. The team is analyzing thousands of metal organic frameworks to identify those that are most suitable for carbon capture based both on their ability to allow coal exhaust to pass easily through them and their ability to select CO2 from that exhaust for capture and storage. The most suitable frameworks would be inserted into the walls of the hollow fiber membranes, making the technology readily scalable due to their high surface area. This composite membrane would be highly stable, withstanding the harsh gas environment found in coal exhaust.

  16. CO2 Capture with Liquid-to-Solid Absorbents: CO2 Capture Process Using Phase-Changing Absorbents

    SciTech Connect (OSTI)

    None

    2010-10-01T23:59:59.000Z

    IMPACCT Project: GE and the University of Pittsburgh are developing a unique CO2 capture process in which a liquid absorbent, upon contact with CO2, changes into a solid phase. Once in solid form, the material can be separated and the CO2 can be released for storage by heating. Upon heating, the absorbent returns to its liquid form, where it can be reused to capture more CO2. The approach is more efficient than other solventbased processes because it avoids the heating of extraneous solvents such as water. This ultimately leads to a lower cost of CO2 capture and will lower the additional cost to produce electricity for coal-fired power plants that retrofit their facilities to include this technology.

  17. ARM: Broadband Radiometer Station (BRS) broadband shortwave and longwave 1-min radiation data with Dutton correction

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Stoffel, Tom; Kay, Bev; Habte, Aron; Anderberg, Mary; Kutchenreiter, Mark

    Broadband Radiometer Station (BRS) broadband shortwave and longwave 1-min radiation data with Dutton correction

  18. Decay Oscillations in Electron Capture and the Neutrino Mass Difference

    E-Print Network [OSTI]

    Murray Peshkin

    2014-03-17T23:59:59.000Z

    Quantum mechanical theory disallows the model that has been used to infer the neutrino mass difference from the reported "GSI oscillations" in the rates of decay of hydrogen-like ions by electron capture. It has not been proved that the existence of mass-difference-dependent oscillations conflicts with quantum mechanics but no consistent quantum mechanical model has been shown to predict them.

  19. Capturing Human Hand Kinematics for Object Grasping and Manipulation

    E-Print Network [OSTI]

    Ghosh, Shramana

    2013-04-25T23:59:59.000Z

    The aim of this thesis is to create a low-cost sensor equipped glove using commercially available components that can be used to obtain position, velocity and acceleration data for individual fingers of a hand within an optical motion capture...

  20. Global ecosystem services With their ability to capture and store

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Locatelli Carbon sequestration is recognised as a global ecosystem service (see box on next page such as the global climate (through carbon sequestration), the quantity and quality of water and the force of windsS Global ecosystem services With their ability to capture and store carbon, forests contribute

  1. Neutron-Capture Element Trends in the Halo

    E-Print Network [OSTI]

    C. Sneden; J. J. Cowan; J. W. Truran

    2001-01-24T23:59:59.000Z

    In a brief review of abundances neutron-capture elements (Z > ~30) in metal-poor halo stars, attention is called to their star-to-star scatter, the dominance of r-process synthesis at lowest metallicities, the puzzle of the lighter members of this element group, and the possibility of a better r-/s-process discriminant.

  2. Flawed analysis of the possibility of air capture

    E-Print Network [OSTI]

    and energetic analysis of cap- turing CO2 from ambient air," House et al. (1) drew an analogy between air, New York, NY 10027; and c Global Thermostat, New York, NY 10025 1. House KZ, et al. (2011) Economic and energetic analysis of capturing CO2 from ambient air. Proc Natl Acad Sci USA 108:20428­20433. 2. Lackner K

  3. Neutron-capture nucleosynthesis in the first stars

    SciTech Connect (OSTI)

    Roederer, Ian U. [Department of Astronomy, University of Michigan, 500 Church Street, Ann Arbor, MI 48109 (United States); Preston, George W.; Thompson, Ian B.; Shectman, Stephen A. [Carnegie Observatories, 813 Santa Barbara Street, Pasadena, CA 91101 (United States); Sneden, Christopher, E-mail: iur@umich.edu [Department of Astronomy, University of Texas at Austin, 1 University Station C1400, Austin, TX 78712 (United States)

    2014-04-01T23:59:59.000Z

    Recent studies suggest that metal-poor stars enhanced in carbon but containing low levels of neutron-capture elements may have been among the first to incorporate the nucleosynthesis products of the first generation of stars. We have observed 16 stars with enhanced carbon or nitrogen using the MIKE Spectrograph on the Magellan Telescopes at Las Campanas Observatory and the Tull Spectrograph on the Smith Telescope at McDonald Observatory. We present radial velocities, stellar parameters, and detailed abundance patterns for these stars. Strontium, yttrium, zirconium, barium, europium, ytterbium, and other heavy elements are detected. In four stars, these heavy elements appear to have originated in some form of r-process nucleosynthesis. In one star, a partial s-process origin is possible. The origin of the heavy elements in the rest of the sample cannot be determined unambiguously. The presence of elements heavier than the iron group offers further evidence that zero-metallicity rapidly rotating massive stars and pair instability supernovae did not contribute substantial amounts of neutron-capture elements to the regions where the stars in our sample formed. If the carbon- or nitrogen-enhanced metal-poor stars with low levels of neutron-capture elements were enriched by products of zero-metallicity supernovae only, then the presence of these heavy elements indicates that at least one form of neutron-capture reaction operated in some of the first stars.

  4. Electron-capture delayed fission properties of [sup 228]Np

    SciTech Connect (OSTI)

    Kreek, S.A.; Hall, H.L.; Gregorich, K.E.; Henderson, R.A.; Leyba, J.D.; Czerwinski, K.R.; Kadkhodayan, B.; Neu, M.P.; Kacher, C.D.; Hamilton, T.M.; Lane, M.R.; Sylwester, E.R.; Tuerler, A.; Lee, D.M.; Nurmia, M.J.; Hoffman, D.C. (Chemistry Department, University of California, Berkeley, California 94720 (United States) Nuclear Science Division, Lawrence Berkeley Laboratory, MS-70A/3307 Berkeley, California 94720 (United States))

    1994-11-01T23:59:59.000Z

    Electron-capture delayed fission was positively identified for the first time in [sup 228]Np produced via the [sup 233]U(50-MeV [ital p],6[ital n])[sup 228]Np reaction. The half-life of the observed fission activity was measured to be 61.4[plus minus]1.4 s. The ECDF mode was verified by an x-ray--fission coincidence experiment. Only about 25% of the expected x-ray--fission coincidences were detected which indicates that [sup 228]U does not have a fission isomer populated by the electron-capture and that the overall lifetime of the high-energy states populated by the electron-capture is less than about 10[sup [minus]17] s. The fission activity was assigned to ECDF of [sup 228]Np based on chemical separation and observation of known progeny activities. The ratio of electron-capture to alpha decay is 1.5[plus minus]0.4 for [sup 228]Np. The production cross section for [sup 228]Np is 35[plus minus]10 [mu]b and the delayed fission probability is (2.0[plus minus]0.9)[times]10[sup [minus]4]. The kinetic energies of coincident fission fragments were measured and a pre-neutron emission, most probable total kinetic energy, of 169[plus minus]6 MeV was obtained. The mass-yield distribution was found to be predominantly asymmetric.

  5. Capturing Carbon Will it work to cool the world?

    E-Print Network [OSTI]

    Calgary, University of

    Capturing Carbon Will it work to cool the world? Speakers: Dr. Malcolm Wilson Chief Executive in Exploration Geophysics Department of Geoscience, University of Calgary Theme Leader for Secure Carbon Storage, Carbon Management Canada Don Wharton Vice-President, Sustainable Development TransAlta Corporation

  6. Chemical Looping Combustion for inherent CO2 capture in a

    E-Print Network [OSTI]

    Evaluate CLC using syngas as fuel Effect of fuel Effect of operating conditions Use CLC for CO2-capture Reactor System O2,N2 CO2,H2O To CO2 recovery and compression #12;15 Clean syngas from different gasifiers

  7. Capture zone design for a contaminated shallow unconfined aquifer

    E-Print Network [OSTI]

    Cann, Eric Roy

    1997-01-01T23:59:59.000Z

    from the early 1950's to 1987. The extent of the ground water contamination has impacted City of Austin properties, private residential areas, and is migrating towards the Colorado River to the South. A capture zone is proposed to stop the contaminants...

  8. Proceedings of the first international symposium on neutron capture therapy

    SciTech Connect (OSTI)

    Fairchild, R.G.; Brownell, G.L. (eds.)

    1982-01-01T23:59:59.000Z

    This meeting was arranged jointly by MIT and BNL in order to illuminate progress in the synthesis and targeting of boron compounds and to evaluate and document progress in radiobiological and dosimetric aspects of neutron capture therapy. It is hoped that this meeting will facilitate transfer of information between groups working in these fields, and encourage synergistic collaboration.

  9. CO2 Capture by Absorption with Potassium Carbonate

    E-Print Network [OSTI]

    Rochelle, Gary T.

    CO2 Capture by Absorption with Potassium Carbonate Third Quarterly Report 2005 Quarterly Progress absorption/stripping by developing an alternative solvent, aqueous K2CO3 promoted by piperazine. Modeling.................................................................................................................................. 11 Task 1 ­ Modeling Performance of Absorption/Stripping of CO2 with Aqueous K2CO3 Promoted

  10. CO2 Capture by Absorption with Potassium Carbonate

    E-Print Network [OSTI]

    Rochelle, Gary T.

    CO2 Capture by Absorption with Potassium Carbonate Fourth Quarterly Report 2005 Quarterly Progress absorption/stripping by developing an alternative solvent, aqueous K2CO3 promoted by piperazine. In Campaign.................................................................................................................................... 9 Task 1 ­ Modeling Performance of Absorption/Stripping of CO2 with Aqueous K2CO3 Promoted

  11. THE BASELINE POSITRON PRODUCTION AND CAPTURE SCHEME FOR CLIC

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    THE BASELINE POSITRON PRODUCTION AND CAPTURE SCHEME FOR CLIC O. Dadoun , I. Chaikovska, P. Lepercq chan- neling as the baseline for unpolarised positron production. The hybrid source uses a few GeV electron beam imping- ing on a tungsten crystal target. With the crystal oriented on its axis

  12. PV powering a weather station for severe weather

    SciTech Connect (OSTI)

    Young, W. Jr. [Florida Solar Energy Center, Cocoa, FL (United States); Schmidt, J. [Joe Schmidt, Inc., Miami, FL (United States)

    1997-12-31T23:59:59.000Z

    A natural disaster, such as Hurricane Andrew, destroys thousands of homes and businesses. The destruction from this storm left thousands of people without communications, potable water, and electrical power. This prompted the Florida Solar Energy Center to study the application of solar electric power for use in disasters. During this same period, volunteers at the Tropical Prediction Center at the National Hurricane Center (NHC), Miami, Florida and the Miami Office of the National Weather Service (NWS) were working to increase the quantity and quality of observations received from home weather stations. Forecasters at NHC have found surface reports from home weather stations a valuable tool in determining the size, strength and course of hurricanes. Home weather stations appear able to record the required information with an adequate level of accuracy. Amateur radio, utilizing the Automatic Packet Report System, (APRS) can be used to transmit this data to weather service offices in virtually real time. Many weather data collecting stations are at remote sites which are not readily serviced by dependable commercial power. Photovoltaic (solar electric) modules generate electricity and when connected to a battery can operate as a stand alone power system. The integration of these components provides an inexpensive standalone system. The system is easy to install, operates automatically and has good communication capabilities. This paper discusses the design criteria, operation, construction and deployment of a prototype solar powered weather station.

  13. INVESTIGATION OF HYDRAULIC PROBLEMS IN PUMPING STATION; CASE STUDY

    E-Print Network [OSTI]

    M. A. Younes

    Pumping stations play an important role in agriculture development projects. Performance of the pumping stations should satisfy water requirements, and management. There are many problems face these pumping stations affecting their reliability and stability. Hydraulic problems are the most important item in the field of pumping station operation and design. Motivation of this research was presence of wear and pitting impellers and casing of double suction volute casing centrifugal pumps for Ahmed Orabee Pumping Station. Vibration level, hydraulic performance test and visual inspection of impeller wear and pitting show that cavitation problem is the cause of damage. Cavitation normally occurs when liquid at a constant temperature is subjected to vapor pressure either by static or dynamic means. If the local pressure somewhere in the fluid drops to or below vapor pressure and nuclei are present, vapor cavities can be formed. As long as the local pressure stays at vapor pressure and cavity has reached a critical diameter, it will continue to grow rapidly. If the surrounding pressure is above vapor pressure, the bubbles become unstable and collapse. The

  14. Measurement of neutron capture on 50Ti at thermonuclear energies

    E-Print Network [OSTI]

    P. V. Sedyshev; P. Mohr; H. Beer; H. Oberhummer; Yu. P. Popov; W. Rochow

    1999-07-28T23:59:59.000Z

    At the Karlsruhe and Tuebingen 3.75 MV Van de Graaff accelerators the thermonuclear 50Ti(n,gamma)51Ti(5.8 min) cross section was measured by the fast cyclic activation technique via the 320.852 and 928.65 keV gamma-ray lines of the 51Ti-decay. Metallic Ti samples of natural isotopic composition and samples of TiO2 enriched in 50Ti by 67.53 % were irradiated between two gold foils which served as capture standards. The capture cross-section was measured at the neutron energies 25, 30, 52, and 145 keV, respectively. The direct capture cross section was determined to be 0.387 +/- 0.011 mbarn at 30 keV. We found evidence for a bound state s-wave resonance with an estimated radiative width of 0.34 eV which destructively interfers with direct capture. The strength of a suggested s-wave resonance at 146.8 keV was determined. The present data served to calculate, in addition to the directly measured Maxwellian averaged capture cross sections at 25 and 52 keV, an improved stellar 50Ti(n,gamma)51Ti rate in the thermonuclear energy region from 1 to 250 keV. The new stellar rate leads at low temperatures to much higher values than the previously recommended rate, e.g., at kT=8 keV the increase amounts to about 50 %. The new reaction rate therefore reduces the abundance of 50Ti due to s-processing in AGB stars.

  15. System and process for capture of H.sub.2S from gaseous process streams and process for regeneration of the capture agent

    DOE Patents [OSTI]

    Heldenbrant, David J; Koech, Phillip K; Rainbolt, James E; Bearden, Mark D; Zheng, Feng

    2014-02-18T23:59:59.000Z

    A system and process are disclosed for selective removal and recovery of H.sub.2S from a gaseous volume, e.g., from natural gas. Anhydrous organic, sorbents chemically capture H.sub.2S gas to form hydrosulfide salts. Regeneration of the capture solvent involves addition of an anti-solvent that releases the captured H.sub.2S gas from the capture sorbent. The capture sorbent and anti-solvent are reactivated for reuse, e.g., by simple distillation.

  16. Locating PHEV Exchange Stations in V2G

    E-Print Network [OSTI]

    Pan, Feng; Berscheid, Alan; Izraelevitz, David

    2010-01-01T23:59:59.000Z

    Plug-in hybrid electric vehicles (PHEVs) are an environmentally friendly technology that is expected to rapidly penetrate the transportation system. Renewable energy sources such as wind and solar have received considerable attention as clean power options for future generation expansion. However, these sources are intermittent and increase the uncertainty in the ability to generate power. The deployment of PHEVs in a vehicle-to-grid (V2G) system provide a potential mechanism for reducing the variability of renewable energy sources. For example, PHEV supporting infrastructures like battery exchange stations that provide battery service to PHEV customers could be used as storage devices to stabilize the grid when renewable energy production is fluctuating. In this paper, we study how to best site these stations in terms of how they can support both the transportation system and the power grid. To model this problem we develop a two-stage stochastic program to optimally locate the stations prior to the realizat...

  17. Astrophysical S-factors of proton radiative capture for thermonuclear reactions

    E-Print Network [OSTI]

    S. B. Dubovichenko; A. V. Dzhazairov-Kakhramanov

    2011-12-09T23:59:59.000Z

    In this review we have considered the possibility to describe the astrophysical S-factors of radiative capture reactions with light atomic nuclei on the basis of the potential two-cluster model by taking into account the splitting the orbital states according to Young's schemes. Within this model, interaction of the nucleon clusters is described by local two-particle potential determined by fit to the scattering data and properties of bound states of these clusters. Many-body character of the problem is taken into account under some approximation, in terms of the allowed or forbidden by the Pauli principle states in intercluster potentials. An important feature of the approach is accounting for a dependence of interaction potential between clusters on the orbital Young scheme, which determines the permutation symmetry of the nucleon system. The astrophysical S-factors of the radiative capture processes in the p2H, p7Li and p12C systems are analyzed on the basis of this approach. It is shown that the approach allows one to describe quite reasonably experimental data available at low energies, when the phase shifts of cluster-cluster scattering are extracted from the data with minimal errors. In this connection the problem of experimental error decrease is exclusively urgent for the differential cross-sections of elastic scattering of light atomic nuclei at astrophysical energies and to perform a more accurate phase shift analysis. The increase in the accuracy will allow, in future, making more definite conclusions regarding the mechanisms and conditions of thermonuclear reactions, as well as understanding better their nature in general.

  18. EIS-0210: Tampa Electric Company-Polk Power Station (Adopted)

    Broader source: Energy.gov [DOE]

    The U.S. Environmental Protection Agency prepared this statement to fulfill its National Environmental Policy Act requirements with respect to the potential issuance of a permit to the Tampa Electric Company under the National Pollutant Discharge Elimination System for the 1,150-MW Polk Power Station, a new pollutant source. The U.S. Department of Energy served as a cooperating agency in the development of this document due to its potential role to provide cost-shared financial assistance for a 260-MW Integrated Gasification Combined Cycle unit at the Power Station under its Clean Coal Technology Demonstration Project, and adopted the document by August 1994.

  19. Design of photovoltaic central power station concentrator array

    SciTech Connect (OSTI)

    Not Available

    1984-02-01T23:59:59.000Z

    A design for a photovoltaic central power station using tracking concentrators has been developed. The 100 MW plant is assumed to be located adjacent to the Saguaro Power Station of Arizona Public Service. The design assumes an advanced Martin Marietta two-axis tracking fresnel lens concentrator. The concentrators are arrayed in 5 MW subfields, each with its own power conditioning unit. The photovoltaic plant output is connected to the existing 115 kV switchyard. The site specific design allows detailed cost estimates for engineering, site preparation, and installation. Collector and power conditioning costs have been treated parametrically.

  20. antarctic receiving station: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and Antarctic) have been considered as bellwethers in the detection of global climate change. According to IPCC (2001), Climate change in polar regions is expected to be among...

  1. Thermodynamic Properties of CO{sub 2} Capture Reaction by Solid Sorbents: Theoretical Predictions and Experimental Validations

    SciTech Connect (OSTI)

    Duan, Yuhua; Luebke, David; Pennline, Henry; Li, Liyu; King, David; Zhang; Keling; Zhao; Lifeng; Xiao, Yunhan

    2012-01-01T23:59:59.000Z

    It is generally accepted that current technologies for capturing CO{sub 2} are still too energy intensive. Hence, there is a critical need for development of new materials that can capture CO{sub 2} reversibly with acceptable energy costs. Accordingly, solid sorbents have been proposed to be used for CO{sub 2} capture applications through a reversible chemical transformation. By combining thermodynamic database mining with first principles density functional theory and phonon lattice dynamics calculations, a theoretical screening methodology to identify the most promising CO{sub 2} sorbent candidates from the vast array of possible solid materials has been proposed and validated. The calculated thermodynamic properties of different classes of solid materials versus temperature and pressure changes were further used to evaluate the equilibrium properties for the CO{sub 2} adsorption/desorption cycles. According to the requirements imposed by the pre- and post- combustion technologies and based on our calculated thermodynamic properties for the CO{sub 2} capture reactions by the solids of interest, we were able to screen only those solid materials for which lower capture energy costs are expected at the desired pressure and temperature conditions. These CO{sub 2} sorbent candidates were further considered for experimental validations. In this presentation, we first introduce our screening methodology with validating by solid dataset of alkali and alkaline metal oxides, hydroxides and bicarbonates which thermodynamic properties are available. Then, by studying a series of lithium silicates, we found that by increasing the Li{sub 2}O/SiO{sub 2} ratio in the lithium silicates their corresponding turnover temperatures for CO{sub 2} capture reactions can be increased. Compared to anhydrous K{sub 2}CO{sub 3}, the dehydrated K{sub 2}CO{sub 3}?1.5H{sub 2}O can only be applied for post-combustion CO{sub 2} capture technology at temperatures lower than its phase transition (to anhydrous phase) temperature, which depends on the CO{sub 2} pressure and the steam pressure with the best range being PH{sub 2}O?1.0 bar. Above the phase-transition temperature, the sorbent will be regenerated into anhydrous K{sub 2}CO{sub 3}. Our theoretical investigations on Na-promoted MgO sorbents revealed that the sorption process takes place through formation of the Na{sub 2}Mg(CO{sub 3}){sub 2} double carbonate with better reaction kinetics over porous MgO, that of pure MgO sorbent. The experimental sorption tests also indicated that the Na-promoted MgO sorbent has high reactivity and capacity towards CO{sub 2} sorption and can be easily regenerated either through pressure or temperature swing processes.

  2. Carbon Dioxide Capture and Transportation Options in the Illinois Basin

    SciTech Connect (OSTI)

    M. Rostam-Abadi; S. S. Chen; Y. Lu

    2004-09-30T23:59:59.000Z

    This report describes carbon dioxide (CO{sub 2}) capture options from large stationary emission sources in the Illinois Basin, primarily focusing on coal-fired utility power plants. The CO{sub 2} emissions data were collected for utility power plants and industrial facilities over most of Illinois, southwestern Indiana, and western Kentucky. Coal-fired power plants are by far the largest CO{sub 2} emission sources in the Illinois Basin. The data revealed that sources within the Illinois Basin emit about 276 million tonnes of CO2 annually from 122 utility power plants and industrial facilities. Industrial facilities include 48 emission sources and contribute about 10% of total emissions. A process analysis study was conducted to review the suitability of various CO{sub 2} capture technologies for large stationary sources. The advantages and disadvantages of each class of technology were investigated. Based on these analyses, a suitable CO{sub 2} capture technology was assigned to each type of emission source in the Illinois Basin. Techno-economic studies were then conducted to evaluate the energy and economic performances of three coal-based power generation plants with CO{sub 2} capture facilities. The three plants considered were (1) pulverized coal (PC) + post combustion chemical absorption (monoethanolamine, or MEA), (2) integrated gasification combined cycle (IGCC) + pre-combustion physical absorption (Selexol), and (3) oxygen-enriched coal combustion plants. A conventional PC power plant without CO2 capture was also investigated as a baseline plant for comparison. Gross capacities of 266, 533, and 1,054 MW were investigated at each power plant. The economic study considered the burning of both Illinois No. 6 coal and Powder River Basin (PRB) coal. The cost estimation included the cost for compressing the CO{sub 2} stream to pipeline pressure. A process simulation software, CHEMCAD, was employed to perform steady-state simulations of power generation systems and CO{sub 2} capture processes. Financial models were developed to estimate the capital cost, operations and maintenance cost, cost of electricity, and CO{sub 2} avoidance cost. Results showed that, depending on the plant size and the type of coal burned, CO{sub 2} avoidance cost is between $47/t to $67/t for a PC +MEA plant, between $22.03/t to $32.05/t for an oxygen combustion plant, and between $13.58/t to $26.78/t for an IGCC + Selexol plant. A sensitivity analysis was conducted to evaluate the impact on the CO2 avoidance cost of the heat of absorption of solvent in an MEA plant and energy consumption of the ASU in an oxy-coal combustion plant. An economic analysis of CO{sub 2} capture from an ethanol plant was also conducted. The cost of CO{sub 2} capture from an ethanol plant with a production capacity of 100 million gallons/year was estimated to be about $13.92/t.

  3. Carbon dioxide capture from a cement manufacturing process

    DOE Patents [OSTI]

    Blount, Gerald C. (North Augusta, SC); Falta, Ronald W. (Seneca, SC); Siddall, Alvin A. (Aiken, SC)

    2011-07-12T23:59:59.000Z

    A process of manufacturing cement clinker is provided in which a clean supply of CO.sub.2 gas may be captured. The process also involves using an open loop conversion of CaO/MgO from a calciner to capture CO.sub.2 from combustion flue gases thereby forming CaCO.sub.3/CaMg(CO.sub.3).sub.2. The CaCO.sub.3/CaMg(CO.sub.3).sub.2 is then returned to the calciner where CO.sub.2 gas is evolved. The evolved CO.sub.2 gas, along with other evolved CO.sub.2 gases from the calciner are removed from the calciner. The reactants (CaO/MgO) are feed to a high temperature calciner for control of the clinker production composition.

  4. Mercury capture by distinct fly ash carbon forms

    SciTech Connect (OSTI)

    Hower, J.C.; Maroto-Valer, M.M.; Taulbee, D.N.; Sakulpitakphon, T.

    1999-07-01T23:59:59.000Z

    Carbon was separated from the fly ash from a Kentucky power plant using density gradient centrifugation. Using a lithium heterolpolytungstate high-density media, relative concentrations of inertinite (up to 85% vol.), isotropic carbon (up to 79% vol.), and anisotropic carbon (up to 76% vol.) were isolated from the original fly ash. Mercury concentration was lowest in the parent fly ash (which contains non-carbon components); followed by inertinite, isotropic coke, mixed isotropic-anisotropic coke fraction, and, with the highest concentration, the anisotropic coke concentrate. The latter order corresponds to the increase in BET surface area of the fly ash carbons. Previous studies have demonstrated the capture of mercury by fly ash carbon. This study confirms prior work demonstrating the varying role of carbon types in the capture, implying that variability in the carbon content influences the amount of mercury retained on the fly ash.

  5. Apparatus for separating particles utilizing engineered acoustic contrast capture particles

    DOE Patents [OSTI]

    Kaduchak, Gregory; Ward, Michael D

    2014-10-21T23:59:59.000Z

    An apparatus for separating particles from a medium includes a capillary defining a flow path therein that is in fluid communication with a medium source. The medium source includes engineered acoustic contrast capture particle having a predetermined acoustic contrast. The apparatus includes a vibration generator that is operable to produce at least one acoustic field within the flow path. The acoustic field produces a force potential minima for positive acoustic contrast particles and a force potential minima for negative acoustic contrast particles in the flow path and drives the engineered acoustic contrast capture particles to either the force potential minima for positive acoustic contrast particles or the force potential minima for negative acoustic contrast particles.

  6. Gamma decay of unbound states following neutron capture

    SciTech Connect (OSTI)

    Raman, S.

    1982-01-01T23:59:59.000Z

    Neutron capture ..gamma..-ray spectroscopy is a powerful technique to study the ..gamma..-decay of unbound levels just above the neutron separation energy. It is generally believed that the (n,..gamma..) reaction proceeds by way of a compound nucleus reaction of great complexity; and, therefore, the capture ..gamma..-ray spectrum should be describable in terms of statistical laws. However, measurements have shown that effects are present due to single-particle motions and due to giant resonances. The study of (n,..gamma..) spectra averaged over as many resonances as possible provides one of the best experimental means of directly obtaining reliable values for radiative transition probabilities from highly excited nuclear states. In very select cases, unbound levels which are populated in allowed ..beta.. decay can also be observed as neutron resonances. These ideas are illustrated with examples of recent data.

  7. Apparatus for separating particles utilizing engineered acoustic contrast capture particles

    DOE Patents [OSTI]

    Kaduchak, Gregory (Los Alamos, NM); Ward, Michael D. (Los Alamos, NM)

    2011-12-27T23:59:59.000Z

    An apparatus for separating particles from a medium includes a capillary defining a flow path therein that is in fluid communication with a medium source. The medium source includes engineered acoustic contrast capture particle having a predetermined acoustic contrast. The apparatus includes a vibration generator that is operable to produce at least one acoustic field within the flow path. The acoustic field produces a force potential minima for positive acoustic contrast particles and a force potential minima for negative acoustic contrast particles in the flow path and drives the engineered acoustic contrast capture particles to either the force potential minima for positive acoustic contrast particles or the force potential minima for negative acoustic contrast particles.

  8. CARBON DIOXIDE CAPTURE FROM FLUE GAS USING DRY REGENERABLE SORBENTS

    SciTech Connect (OSTI)

    David A. Green; Brian S. Turk; Jeffrey W. Portzer; Raghubir P. Gupta; William J. McMichael; Thomas Nelson

    2004-07-01T23:59:59.000Z

    This report describes research conducted between April 1, 2004 and June 30, 2004 on the preparation and use of dry regenerable sorbents for removal of carbon dioxide from flue gas. Support materials and supported sorbents were prepared by spray drying. Sorbents consisting of 20 to 50% sodium carbonate on a ceramic support were prepared by spray drying in batches of approximately 300 grams. The supported sorbents exhibited greater carbon dioxide capture rates than unsupported calcined sodium bicarbonate in laboratory tests. Preliminary process design and cost estimation for a retrofit application suggested that costs of a dry regenerable sodium carbonate-based process could be lower than those of a monoethanolamine absorption system. In both cases, the greatest part of the process costs come from power plant output reductions due to parasitic consumption of steam for recovery of carbon dioxide from the capture medium.

  9. Gamma Spectrum from Neutron Capture on Tungsten Isotopes

    SciTech Connect (OSTI)

    Hurst, Aaron; Summers, Neil; Sleaford, Brad; Firestone, Richard B; Belgya, T.; Revay, Z.S.

    2010-04-29T23:59:59.000Z

    An evaluation of thermal neutron capture on the stable tungsten isotopes is presented, with preliminary results for the compound systems 183;184;185;187W. The evaluation procedure compares the g-ray cross-section data collected at the Budapest reactor, with Monte Carlo simulations of g-ray emission following the thermal neutron-capture process. The statistical-decay code DICEBOX was used for the Monte Carlo simulations. The evaluation yields new gamma rays in 185W and the confirmation of spins in 187W, raising the number of levels below which the level schemes are considered complete, thus increasing the number of levels that can be used in neutron data libraries.

  10. Amine enriched solid sorbents for carbon dioxide capture

    DOE Patents [OSTI]

    Gray, McMahan L. (Pittsburgh, PA); Soong, Yee (Monroeville, PA); Champagne, Kenneth J. (Fredericktown, PA)

    2003-04-15T23:59:59.000Z

    A new method for making low-cost CO.sub.2 sorbents that can be used in large-scale gas-solid processes. The new method entails treating a solid substrate with acid or base and simultaneous or subsequent treatment with a substituted amine salt. The method eliminates the need for organic solvents and polymeric materials for the preparation of CO.sub.2 capture systems.

  11. Hafnium Resonance Parameter Analysis Using Neutron Capture and Transmission Experiments

    SciTech Connect (OSTI)

    MJ Trbovich; DP Barry; RE Slovacck; Y Danon; RC Block; JA Burke; NJ Drindak; G Leinweber; RV Ballad

    2004-10-13T23:59:59.000Z

    The focus of this work is to determine resonance parameters for stable hafnium isotopes in the 0.005-200 eV region, with special emphasis on the overlapping {sup 176}Hf and {sup 178}Hf resonances near 8 eV. The large neutron cross section of hafnium, combined with its corrosion resistance and excellent mechanical properties, make it a useful material for controlling nuclear reactions. Experiments measuring neutron capture and transmission were performed at the Rensselaer Polytechnic Institute (RPI) electron linear accelerator (LINAC) using the time of flight method. {sup 6}Li glass scintillation detectors were used for transmission experiments at flight path lengths of 15 and 25 m. Capture experiments were done using a sixteen section NaI(Tl) multiplicity detector at a flight path length of 25 m. These experiments utilized various thicknesses of metallic and isotopically-enriched liquid samples. The liquid samples were designed to provide information on the {sup 176}Hf and {sup 178}Hf contributions to the 8 eV doublet without saturation. Data analysis was done using the R-matrix Bayesian code SAMMY version M6 beta. SAMMY is able to account for experimental resolution effects for each of the experimental setups at the RPI LINAC, and also can correct for multiple scattering effects in neutron capture yield data. The combined capture and transmission data analysis yielded resonance parameters for all hafnium isotopes from 0.005-200 eV. Resonance integrals were calculated along with errors for each hafnium isotope using the NJOY [1] and INTER [2] codes. The isotopic resonance integrals calculated were significantly different than previously published values; however the calculated elemental hafnium resonance integral changed very little.

  12. VISITOR PARKING Pay station parking meters are available around

    E-Print Network [OSTI]

    temporary parking needs. Daily scratch-off permits are available in advance from Parking Services. LOT METER PAY STATION RATES (SUMMER RATES MAY BE DISCOUNTED) HOW DO I GET A PERMIT? When parking on campus, a CSM parking permit is required Monday through Friday, from 7AM until 5 PM. Permits authorize parking

  13. Leica EG1160 Compact, programmable tissue embedding station

    E-Print Network [OSTI]

    Adams, Mark

    and exemplary comfort and safety standards characterize this tissue embed- ding station as much of the Leica CLS series, with especially intense illumination and focusing fiber-optic light guide, to a vacuum / 60 Hz 230 V / 50 Hz Operating temperature range: 18 °C ­ 40 °C Dimensions (W x H x D): 910 x 320 x

  14. Field Stations Compliance CommitteesAdministrative Units Research Units

    E-Print Network [OSTI]

    Doudna, Jennifer A.

    for Integrative Planetary Science Center for Latin American Studies Center for Medicine, the Humanities & Law History Museums Blue Oak Ranch Reserve Donner Region-Field Research Stations -Chickering American River Reserve -Sagehen Creek -Central Sierra Snow Laboratory Essig Museum of Entomology Gump South Pacific

  15. Mississippi Agricultural and Forestry Experiment Station Vehicle Rental Request Form

    E-Print Network [OSTI]

    Ray, David

    Mississippi Agricultural and Forestry Experiment Station Vehicle Rental Request Form Driver Name Date: Travel Destination: Account #: Vehicle Information 1995 Crown Victoria 1995 Crown Victoria 1995 with the MSU Authorized Vehicle Use Policy. You further acknowledge that you have executed the Mississippi

  16. EIS-0415: Deer Creek Station Energy Facility Project, South Dakota

    Broader source: Energy.gov [DOE]

    This EIS analyzes WAPA's decision to approve the interconnection request made by Basin Electric Power Cooperative (Basin Electric) with the USDA Rural Utilities Service (RUS) proposing to provide financial assistance, for the Deer Creek Station Project, a proposed 300-megawatt (MW) natural gas-fired generation facility.

  17. DEVELOPMENT OF A TURNKEY COMMERCIAL HYDROGEN FUELING STATION

    E-Print Network [OSTI]

    from central production plants; however, the next phase to fostering the hydrogen economy will likely of the hydrogen fuel economy for buses, fleet vehicles, and ultimately personal vehicles. In order to demonstrateDEVELOPMENT OF A TURNKEY COMMERCIAL HYDROGEN FUELING STATION David E. Guro Air Products

  18. APPARENT WATER OPTICAL PROPERTIES AT THE CARIBBEAN TIME SERIES STATION

    E-Print Network [OSTI]

    Gilbes, Fernando

    APPARENT WATER OPTICAL PROPERTIES AT THE CARIBBEAN TIME SERIES STATION Roy A. Armstrong, Jose M of Puerto Rico Mayagüez, Puerto Rico 00681 ABSTRACT The Caribbean Time Series, located 28 nautical miles in near- surface waters of the northeastern Caribbean Basin. Apparent optical properties such as, remote

  19. Control of Volunteer Annual Sunflower Texas Agricultural Experiment Station -2000

    E-Print Network [OSTI]

    Mukhtar, Saqib

    Control of Volunteer Annual Sunflower Texas Agricultural Experiment Station - 2000 Brent Bean panhandle which require less water and less nitrogen to produce. As many corn fields will inevitably Center Amarillo, TX, E-mail: b-bean@tamu.edu and m-rowland #12;Table 1. Percent Volunteer Sunflower

  20. Mountain Lake Biological Station University of Virginia DISASTER PLAN

    E-Print Network [OSTI]

    Brodie III, Edmund D.

    . For all NON-EMERGENCY Disasters (minor accident, electrical failure, etc.) contact any MLBS staff member, lightning strikes, and power outages in and around the station. If a storm is approaching, take shelter immediately, secure doors and windows, and shutdown or unplug non-essential electrical equipment

  1. research in space Facilities on the International Space Station

    E-Print Network [OSTI]

    research in space Facilities on the International Space Station #12;1 #12;2 Table of Contents and Materials Research: 41 Fluid Physics, Crystal Growth, and External Test Beds Earth and Space Science (External and Internal): 51 Radiation, Thermal, Solar, and Geophysics ISS Control Centers 59 To Learn More

  2. An Overview of Energy-efficient Base Station Management Techniques

    E-Print Network [OSTI]

    Wichmann, Felix

    where users tend to exhibit similar behaviors, so that the load profile exhibits large variations. Unfortunately, this is not true: the power versus load profiles of base stations, and of the entire network performance maximization at full load. Indeed, the full load working condition is the most critical

  3. A summary of North American HVDC converter station reliability specifications

    SciTech Connect (OSTI)

    Vancers, I. (ABB Power Systems Inc., Los Angeles, CA (United States)); Hormozi, F.J. (Los Angeles Dept. of Water and Power, CA (United States))

    1993-07-01T23:59:59.000Z

    This paper summarizes Reliability, Availability, and Maintainability (RAM) specifications that were issued for thyristor based HVDC converter stations in service in North America. A total of twenty project specifications are summarized. A detailed summary by project is shown with specific quantitative requirements categorized. Definitions of terms, representative design principles, and formulas used in calculating RAM parameters contained in existing reliability specifications are presented.

  4. Risk-Based Comparison of Carbon Capture Technologies

    SciTech Connect (OSTI)

    Engel, David W.; Dalton, Angela C.; Dale, Crystal; Jones, Edward

    2013-05-01T23:59:59.000Z

    In this paper, we describe an integrated probabilistic risk assessment methodological framework and a decision-support tool suite for implementing systematic comparisons of competing carbon capture technologies. Culminating from a collaborative effort among national laboratories under the Carbon Capture Simulation Initiative (CCSI), the risk assessment framework and the decision-support tool suite encapsulate three interconnected probabilistic modeling and simulation components. The technology readiness level (TRL) assessment component identifies specific scientific and engineering targets required by each readiness level and applies probabilistic estimation techniques to calculate the likelihood of graded as well as nonlinear advancement in technology maturity. The technical risk assessment component focuses on identifying and quantifying risk contributors, especially stochastic distributions for significant risk contributors, performing scenario-based risk analysis, and integrating with carbon capture process model simulations and optimization. The financial risk component estimates the long-term return on investment based on energy retail pricing, production cost, operating and power replacement cost, plan construction and retrofit expenses, and potential tax relief, expressed probabilistically as the net present value distributions over various forecast horizons.

  5. Electron-capture delayed fission properties of {sup 242}Es

    SciTech Connect (OSTI)

    Shaughnessy, D. A. [Nuclear Science Division, Lawrence Berkeley National Laboratory, MS 70-319, Berkeley, California 94720 (United States) [Nuclear Science Division, Lawrence Berkeley National Laboratory, MS 70-319, Berkeley, California 94720 (United States); Chemistry Department, University of California, Berkeley, California 94720 (United States); Adams, J. L. [Nuclear Science Division, Lawrence Berkeley National Laboratory, MS 70-319, Berkeley, California 94720 (United States) [Nuclear Science Division, Lawrence Berkeley National Laboratory, MS 70-319, Berkeley, California 94720 (United States); Gregorich, K. E. [Nuclear Science Division, Lawrence Berkeley National Laboratory, MS 70-319, Berkeley, California 94720 (United States) [Nuclear Science Division, Lawrence Berkeley National Laboratory, MS 70-319, Berkeley, California 94720 (United States); Lane, M. R. [Nuclear Science Division, Lawrence Berkeley National Laboratory, MS 70-319, Berkeley, California 94720 (United States) [Nuclear Science Division, Lawrence Berkeley National Laboratory, MS 70-319, Berkeley, California 94720 (United States); Laue, C. A. [Nuclear Science Division, Lawrence Berkeley National Laboratory, MS 70-319, Berkeley, California 94720 (United States) [Nuclear Science Division, Lawrence Berkeley National Laboratory, MS 70-319, Berkeley, California 94720 (United States); Lee, D. M. [Nuclear Science Division, Lawrence Berkeley National Laboratory, MS 70-319, Berkeley, California 94720 (United States) [Nuclear Science Division, Lawrence Berkeley National Laboratory, MS 70-319, Berkeley, California 94720 (United States); McGrath, C. A. [Nuclear Science Division, Lawrence Berkeley National Laboratory, MS 70-319, Berkeley, California 94720 (United States) [Nuclear Science Division, Lawrence Berkeley National Laboratory, MS 70-319, Berkeley, California 94720 (United States); Patin, J. B. [Nuclear Science Division, Lawrence Berkeley National Laboratory, MS 70-319, Berkeley, California 94720 (United States) [Nuclear Science Division, Lawrence Berkeley National Laboratory, MS 70-319, Berkeley, California 94720 (United States); Strellis, D. A. [Nuclear Science Division, Lawrence Berkeley National Laboratory, MS 70-319, Berkeley, California 94720 (United States) [Nuclear Science Division, Lawrence Berkeley National Laboratory, MS 70-319, Berkeley, California 94720 (United States); Sylwester, E. R. [Nuclear Science Division, Lawrence Berkeley National Laboratory, MS 70-319, Berkeley, California 94720 (United States) [Nuclear Science Division, Lawrence Berkeley National Laboratory, MS 70-319, Berkeley, California 94720 (United States); Chemistry Department, University of California, Berkeley, California 94720 (United States)] (and others)

    2000-04-01T23:59:59.000Z

    Electron-capture delayed fission of {sup 242}Es produced via the {sup 233}U({sup 14}N,5n){sup 242}Es reaction at 87 MeV (on target) was observed to decay with a half-life of 11{+-}3 s, consistent with the reported {alpha}-decay half-life of {sup 242}Es of 16{sub -4}{sup +6} s. The mass-yield distribution of the fission fragments is highly asymmetric. The average pre-neutron emission total kinetic energy of the fragments was measured to be 183{+-}18 MeV. Based on the ratio of the measured number of fission events to the measured number of {alpha} decays from the electron-capture daughter {sup 242}Cf (100% {alpha} branch), the probability of delayed fission was determined to be 0.006{+-}0.002. This value for the delayed fission probability fits the experimental trend of increasing delayed fission probability with increasing Q value for electron capture. (c) 2000 The American Physical Society.

  6. MobileEssence : a mobile non-invasive platform for meeting notes capture

    E-Print Network [OSTI]

    Johnson, Anthony Morris

    2009-01-01T23:59:59.000Z

    MobileEssence provides a light-weight, ubiquitous meeting capture tool which affords the user the ability to capture all important information, including recording what was just said, who said it, and what is being said ...

  7. A Strategy for Carbon Capture and Storage (CCS) in the United...

    Open Energy Info (EERE)

    A Strategy for Carbon Capture and Storage (CCS) in the United Kingdom and Beyond Jump to: navigation, search Tool Summary LAUNCH TOOL Name: A Strategy for Carbon Capture and...

  8. Physiological response of Kemp's ridley sea turtles (Lepidochelys kempii) to entanglement net capture

    E-Print Network [OSTI]

    Hoopes, Lisa Ann

    1999-01-01T23:59:59.000Z

    Kemp's ridley sea turtles (Lepidochelys kempii) were captured in entanglement nets near Sabine Pass, Tx/La, during May through August, 1996 and 1997. Serial blood samples were collected to: 1) identify physiological effects of capture; 2) determine...

  9. The lifetime of carbon capture and storage as a climate-change mitigation technology

    E-Print Network [OSTI]

    Szulczewski, Michael Lawrence

    In carbon capture and storage (CCS), CO[subscript 2] is captured at power plants and then injected underground into reservoirs like deep saline aquifers for long-term storage. While CCS may be critical for the continued ...

  10. CONFERENCE PROCEEDINGS EIGHTH ANNUAL CONFERENCE ON CARBON CAPTURE AND SEQUESTRATION -DOE/NETL

    E-Print Network [OSTI]

    Mohaghegh, Shahab

    CONFERENCE PROCEEDINGS EIGHTH ANNUAL CONFERENCE ON CARBON CAPTURE AND SEQUESTRATION - DOE/NETL May ON CARBON CAPTURE AND SEQUESTRATION - DOE/NETL May 4 ­ 7, 2009 Abstract Reservoir simulation is the industry

  11. E-Print Network 3.0 - astrophysical rapid proton-capture Sample...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Neutron and proton capture reactions... explosions 3, as well ass type I X-ray bursts (rapid proton capture process, rp-process) 4, and might... iron 2. Meanwhile...

  12. Comparison of solvents for post-combustion capture of CO2 by chemical absorption

    E-Print Network [OSTI]

    Kothandaraman, Anusha

    Post combustion absorption technologies represent one of the most commercially ready technologies for CO2 capture. Solvent selection is the critical consideration in post-combustion absorption capture technology. In order ...

  13. Construction Begins on DOE-Sponsored Carbon-Capture Project at...

    Office of Environmental Management (EM)

    Construction Begins on DOE-Sponsored Carbon-Capture Project at Kentucky Power Plant Construction Begins on DOE-Sponsored Carbon-Capture Project at Kentucky Power Plant July 21,...

  14. Novel Carbon Capture Solvent Begins Pilot-Scale Testing for Emissions...

    Broader source: Energy.gov (indexed) [DOE]

    Pilot-scale testing of an advanced technology for economically capturing carbon dioxide (CO2) from flue gas has begun at the National Carbon Capture Center (NCCC) in Wilsonville,...

  15. A credit risk model for agricultural loan portfolios under the new Basel Capital Accord

    E-Print Network [OSTI]

    Kim, Juno

    2005-08-29T23:59:59.000Z

    The New Basel Capital Accord (Basel II) provides added emphasis to the development of portfolio credit risk models. An important regulatory change in Basel II is the differentiated treatment in measuring capital requirements for the corporate...

  16. LWA Station-Level Observing Procedure and Associated Metadata

    E-Print Network [OSTI]

    Ellingson, Steven W.

    ) and declination (DEC). · Solar Tracking (TRK SOL). This is a beam output mode in which the beam tracks the Sun of observation "metadata"; that is, data which is produced by MCS as part of the processes of scheduling and conducting the observation. Metadata is distinct from the primary instrument output, which is captured by MCS

  17. LWA Station-Level Observing Procedure and Associated Metadata

    E-Print Network [OSTI]

    Ellingson, Steven W.

    output, which is captured by MCS data recorders (MCS-DRs). The latter is documented in the ICDs of the DP of data from the session-specified DP output, during which the parameters defining the observation (as a specified right ascension (RA) and declination (DEC). · Solar Tracking (TRK SOL). This is a beam output mode

  18. A Framework for Environmental Assessment of CO2 Capture and Storage Systems

    E-Print Network [OSTI]

    Sathre, Roger

    2013-01-01T23:59:59.000Z

    increased electricity generation from other power plants inplants require the capture of more CO 2 per unit of electricity generation.

  19. Computational Evaluation of Metal-Organic Frameworks for CO2 Capture

    E-Print Network [OSTI]

    Yu, Jiamei

    2013-03-20T23:59:59.000Z

    of commercial CCS projects. Depending on the generation of CO2, there are mainly three basic CO2 separation and capture options: pre-combustion capture, oxy-fuel combustion and post-combustion capture.4 Pre-combustion capture mainly involves the reactions..., the expensive cost and the public resistance for new construction of plants are other concerns. Oxy-fuel combustion requires pure oxygen rather than air for the burning, therefore, the production of pure oxygen significantly increases the cost...

  20. ESBWR response to an extended station blackout/loss of all AC power

    SciTech Connect (OSTI)

    Barrett, A. J.; Marquino, W. [New Plants Engineering, GE Hitachi Nuclear Energy, M/CA 75, 3901 Castle Hayne Road, Wilmington, NC 28402 (United States)

    2012-07-01T23:59:59.000Z

    U.S. federal regulations require light water cooled nuclear power plants to cope with Station Blackouts for a predetermined amount of time based on design factors for the plant. U.S. regulations define Station Blackout (SBO) as a loss of the offsite electric power system concurrent with turbine trip and unavailability of the onsite emergency AC power system. According to U.S. regulations, typically the coping period for an SBO is 4 hours and can be as long as 16 hours for currently operating BWR plants. Being able to cope with an SBO and loss of all AC power is required by international regulators as well. The U.S. licensing basis for the ESBWR is a coping period of 72 hours for an SBO based on U.S. NRC requirements for passive safety plants. In the event of an extended SBO (viz., greater than 72 hours), the ESBWR response shows that the design is able to cope with the event for at least 7 days without AC electrical power or operator action. ESBWR is a Generation III+ reactor design with an array of passive safety systems. The ESBWR primary success path for mitigation of an SBO event is the Isolation Condenser System (ICS). The ICS is a passive, closed loop, safety system that initiates automatically on a loss of power. Upon Station Blackout or loss of all AC power, the ICS begins removing decay heat from the Reactor Pressure Vessel (RPV) by (i) condensing the steam into water in heat exchangers located in pools of water above the containment, and (ii) transferring the decay heat to the atmosphere. The condensed water is then returned by gravity to cool the reactor again. The ICS alone is capable of maintaining the ESBWR in a safe shutdown condition after an SBO for an extended period. The fuel remains covered throughout the SBO event. The ICS is able to remove decay heat from the RPV for at least 7 days and maintains the reactor in a safe shutdown condition. The water level in the RPV remains well above the top of active fuel for the duration of the SBO event. Beyond 7 days, only a few simple actions are needed to cope with the SBO for an indefinite amount of time. The operation of the ICS as the primary success path for mitigation of an SBO, allows for near immediate plant restart once power is restored. (authors)