National Library of Energy BETA

Sample records for access tool sdat

  1. MATCH: Metadata Access Tool for Climate and Health Datasets

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    MATCH is a searchable clearinghouse of publicly available Federal metadata (i.e. data about data) and links to datasets. Most metadata on MATCH pertain to geospatial data sets ranging from local to global scales. The goals of MATCH are to: 1) Provide an easily accessible clearinghouse of relevant Federal metadata on climate and health that will increase efficiency in solving research problems; 2) Promote application of research and information to understand, mitigate, and adapt to the health effects of climate change; 3) Facilitate multidirectional communication among interested stakeholders to inform and shape Federal research directions; 4) Encourage collaboration among traditional and non-traditional partners in development of new initiatives to address emerging climate and health issues. [copied from http://match.globalchange.gov/geoportal/catalog/content/about.page

  2. Web-Based Geographic Information System Tool for Accessing Hanford Site Environmental Data

    SciTech Connect (OSTI)

    Triplett, Mark B.; Seiple, Timothy E.; Watson, David J.; Charboneau, Briant L.; Morse, John G.

    2014-11-15

    Data volume, complexity, and access issues pose severe challenges for analysts, regulators and stakeholders attempting to efficiently use legacy data to support decision making at the U.S. Department of Energy’s (DOE) Hanford Site. DOE has partnered with the Pacific Northwest National Laboratory (PNNL) on the PHOENIX (PNNL-Hanford Online Environmental Information System) project, which seeks to address data access, transparency, and integration challenges at Hanford to provide effective decision support. PHOENIX is a family of spatially-enabled web applications providing quick access to decades of valuable scientific data and insight through intuitive query, visualization, and analysis tools. PHOENIX realizes broad, public accessibility by relying only on ubiquitous web-browsers, eliminating the need for specialized software. It accommodates a wide range of users with intuitive user interfaces that require little or no training to quickly obtain and visualize data. Currently, PHOENIX is actively hosting three applications focused on groundwater monitoring, groundwater clean-up performance reporting, and in-tank monitoring. PHOENIX-based applications are being used to streamline investigative and analytical processes at Hanford, saving time and money. But more importantly, by integrating previously isolated datasets and developing relevant visualization and analysis tools, PHOENIX applications are enabling DOE to discover new correlations hidden in legacy data, allowing them to more effectively address complex issues at Hanford.

  3. Accessibility

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Web Policies Accessibility Accessibility LANL places a high degree of emphasis on user ... Contact Web Team Email Reaching the broadest possible audience Los Alamos National ...

  4. Accessibility

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    is committed to providing access to our Web pages for individuals with disabilities. To meet this commitment, this site is built to comply with the requirements of...

  5. Open access to high-level data and analysis tools in the CMS experiment at the LHC

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Calderon, A.; Colling, D.; Huffman, A.; Lassila-Perini, K.; McCauley, T.; Rao, A.; Rodriguez-Marrero, A.; Sexton-Kennedy, E.

    2015-12-23

    The CMS experiment, in recognition of its commitment to data preservation and open access as well as to education and outreach, has made its first public release of high-level data under the CC0 waiver: up to half of the proton-proton collision data (by volume) at 7 TeV from 2010 in CMS Analysis Object Data format. CMS has prepared, in collaboration with CERN and the other LHC experiments, an open-data web portal based on Invenio. The portal provides access to CMS public data as well as to analysis tools and documentation for the public. The tools include an event display andmore » histogram application that run in the browser. In addition a virtual machine containing a CMS software environment along with XRootD access to the data is available. Within the virtual machine the public can analyse CMS data, example code is provided. As a result, we describe the accompanying tools and documentation and discuss the first experiences of data use.« less

  6. Open access to high-level data and analysis tools in the CMS experiment at the LHC

    SciTech Connect (OSTI)

    Calderon, A.; Colling, D.; Huffman, A.; Lassila-Perini, K.; McCauley, T.; Rao, A.; Rodriguez-Marrero, A.; Sexton-Kennedy, E.

    2015-12-23

    The CMS experiment, in recognition of its commitment to data preservation and open access as well as to education and outreach, has made its first public release of high-level data under the CC0 waiver: up to half of the proton-proton collision data (by volume) at 7 TeV from 2010 in CMS Analysis Object Data format. CMS has prepared, in collaboration with CERN and the other LHC experiments, an open-data web portal based on Invenio. The portal provides access to CMS public data as well as to analysis tools and documentation for the public. The tools include an event display and histogram application that run in the browser. In addition a virtual machine containing a CMS software environment along with XRootD access to the data is available. Within the virtual machine the public can analyse CMS data, example code is provided. As a result, we describe the accompanying tools and documentation and discuss the first experiences of data use.

  7. Energy poverty: how to make modern energy access universal? ...

    Open Energy Info (EERE)

    poverty: how to make modern energy access universal? Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Energy poverty: how to make modern energy access universal? Agency...

  8. Tools for Public Information

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    including Intellus, an online tool that provides transparency and accessibility to the environmental monitoring data from in and around Los Alamos National Laboratory. August 1,...

  9. Open Access

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    access, is a type of unrestricted access to scholarly publications that is online, free of charge to everyone and free of most copyright and licensing restrictions. Open...

  10. Remote Access

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Remote Access Remote Access Laboratory employees can access Research Library databases and products from offsite using our EZproxy service. This service is limited to LANL employees with active Z numbers and cryptocards. Access Electronic Collections with EZproxy Remote Access Journals - Books - Standards - Databases (WOK, etc) How to use EZproxy: From this page: Click on the icon above. From external site: Select "OFFSITE LANL Employee". Enter your Z number and Cryptocard passcode.

  11. Access to Climate Change Technology by Developing Countries ...

    Open Energy Info (EERE)

    to Climate Change Technology by Developing Countries Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Access to Climate Change Technology by Developing Countries Agency...

  12. Accessibility | NREL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    making its electronic and information technologies accessible to individuals with disabilities in accordance with Section 508 of the Rehabilitation Act (29 U.S.C. 794d), as...

  13. Accessing HPSS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Accessing HPSS Accessing HPSS Once you have successfully generated an HPSS token you can access NERSC's HPSS in the different ways listed below. HSI and HTAR are usually the best ways to transfer data in and out of HPSS but other methods are also included. Access Method When to use this method Features Limitations HSI When a full-featured unix-like interface is desired high performance (parallel); unix-like user interface; firewall mode client is specific to HPSS version and might not work at

  14. Accessing PDSF

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Accessing PDSF Accessing PDSF All the linux interactive nodes are known under the name of pdsf.nersc.gov and should be accessed via that name. To access them the ssh protocol should be used and you should make sure that a Keyboard Interactive method is available in your ssh client. You will probably also want to enable X11 forwarding with the -X or -Y option, i.e., ssh -Y pdsf.nersc.gov For more information see Interactive (login) Nodes. If you are in STAR your default unix group is rhstar (just

  15. Projectile-generating explosive access tool

    DOE Patents [OSTI]

    Jakaboski, Juan-Carlos; Todd, Steven N.

    2011-10-18

    An explosive device that can generate a projectile from the opposite side of a wall from the side where the explosive device is detonated. The projectile can be generated without breaching the wall of the structure or container. The device can optionally open an aperture in a solid wall of a structure or a container and form a high-kinetic-energy projectile from the portion of the wall removed to create the aperture.

  16. Projectile-generating explosive access tool

    DOE Patents [OSTI]

    Jakaboski, Juan-Carlos; Hughs, Chance G; Todd, Steven N

    2013-06-11

    A method for generating a projectile using an explosive device that can generate a projectile from the opposite side of a wall from the side where the explosive device is detonated. The projectile can be generated without breaching the wall of the structure or container. The device can optionally open an aperture in a solid wall of a structure or a container and form a high-kinetic-energy projectile from the portion of the wall removed to create the aperture.

  17. Gate Access

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Gate Access Gate Access Print When you first arrive at the ALS, gate clearance will have been arranged for you by the User Office. Berkeley Lab employees and visiting researchers (participating guests) may arrange for gate clearance for their visitors through the Lab's Site Access Office . Please notify the Site Office by submitting a Visitor Pass Request before 3:00 p.m. on the day before the expected visit. Include the name(s) of any visitors, the time you expect them, and your name and

  18. Vehicle barrier with access delay

    DOE Patents [OSTI]

    Swahlan, David J; Wilke, Jason

    2013-09-03

    An access delay vehicle barrier for stopping unauthorized entry into secure areas by a vehicle ramming attack includes access delay features for preventing and/or delaying an adversary from defeating or compromising the barrier. A horizontally deployed barrier member can include an exterior steel casing, an interior steel reinforcing member and access delay members disposed within the casing and between the casing and the interior reinforcing member. Access delay members can include wooden structural lumber, concrete and/or polymeric members that in combination with the exterior casing and interior reinforcing member act cooperatively to impair an adversarial attach by thermal, mechanical and/or explosive tools.

  19. Gate Access

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    to the laboratory. Visitors from outside the U.S. should be prepared to show a valid passport. See Access to the ALS for additional information about visitor procedures at the...

  20. AIRMaster+ Software Tool Brochure | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Software Tool Brochure AIRMaster+ Software Tool Brochure Brochure that provides information on AMO's AIRMaster+ software tool, including how it works, next steps, and how to access the tool. AIRMaster+ Brochure (2.85 MB) More Documents & Publications AIRMaster+ Tool Introduction AIRMaster+ Fact Sheet AIRMaster+

  1. Apparatus for attaching a cleaning tool to a robotic manipulator...

    Office of Scientific and Technical Information (OSTI)

    Apparatus for attaching a cleaning tool to a robotic manipulator Title: Apparatus for attaching a cleaning tool to a robotic manipulator You are accessing a document from the ...

  2. Hopper File Management Tool (Conference) | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    Conference: Hopper File Management Tool Citation Details In-Document Search Title: Hopper File Management Tool You are accessing a document from the Department of Energy's (DOE) ...

  3. Software Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Software Tools Software Tools Copyright materials are released under different mechanisms: Open Source Software and Portfolio Software. CONTACT thumbnail of Kathleen McDonald Head ...

  4. Development Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    More Python Tools Python is an interpreted, general-purpose high-level programming language that is usually accompanied by a variety of useful tools for scientific programming...

  5. Enrollment Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Enrollment Tools Enrollment Tools A comprehensive benefits package with plan options for health care and retirement to take care of our employees today and tomorrow. Contacts Benefits Office (505) 667-1806 Email Enrollment Tools New Hire Benefits Checklist (pdf) New Hire Enrollment Tool (xls

  6. Accelerating Access | OSTI, US Dept of Energy Office of Scientific...

    Office of Scientific and Technical Information (OSTI)

    tools and services, OSTI is a leader in increasing access to the government's vast stores of R&D results. As OSTI has increased precision and power of information search tools, ...

  7. The LLNL MPI_Tool Suite

    Energy Science and Technology Software Center (OSTI)

    2013-10-25

    MPI_T is an interface for tools introduced in the 3.0 version of MPI. The interface provides mechanisms for tools to access and set performance and control variables that are exposed by an MPI implementation. We have developed an MPI_T tool suite to provide a first set of tools exploiting the new interface and to get tool writers started on the path to more sophisticated support.

  8. Percussion tool

    DOE Patents [OSTI]

    Reed, Teddy R.

    2006-11-28

    A percussion tool is described and which includes a housing mounting a tool bit; a reciprocally moveable hammer borne by the housing and which is operable to repeatedly strike the tool bit; and a reciprocally moveable piston enclosed within the hammer and which imparts reciprocal movement to the reciprocally moveable hammer.

  9. REMOTE RETRIEVING TOOL

    DOE Patents [OSTI]

    Fromm, L.W. Jr.

    1958-08-19

    A retrieving tool is described to securely grasp an object for emplacement in, or withdrawal from, an elongated tube. The object is grasped by hooks actuated by a wedge and cann mechanism. The mechanism on the end of a long rodlike structure is controlled by levers or bars at the access end of the tube. This device is particularly useful for positioning fuel elements within a reactor core.

  10. Geometric reasoning about assembly tools

    SciTech Connect (OSTI)

    Wilson, R.H.

    1997-01-01

    Planning for assembly requires reasoning about various tools used by humans, robots, or other automation to manipulate, attach, and test parts and subassemblies. This paper presents a general framework to represent and reason about geometric accessibility issues for a wide variety of such assembly tools. Central to the framework is a use volume encoding a minimum space that must be free in an assembly state to apply a given tool, and placement constraints on where that volume must be placed relative to the parts on which the tool acts. Determining whether a tool can be applied in a given assembly state is then reduced to an instance of the FINDPLACE problem. In addition, the author presents more efficient methods to integrate the framework into assembly planning. For tools that are applied either before or after their target parts are mated, one method pre-processes a single tool application for all possible states of assembly of a product in polynomial time, reducing all later state-tool queries to evaluations of a simple expression. For tools applied after their target parts are mated, a complementary method guarantees polynomial-time assembly planning. The author presents a wide variety of tools that can be described adequately using the approach, and surveys tool catalogs to determine coverage of standard tools. Finally, the author describes an implementation of the approach in an assembly planning system and experiments with a library of over one hundred manual and robotic tools and several complex assemblies.

  11. ACCESSING SUBCONTRACTOR EMPLOYMENT RECORDS

    Broader source: Energy.gov [DOE]

    Federal officials, on occasion, may seek access to contractor or subcontractor employment and personnel records. There are circumstances in which such access is appropriate and permissible. But...

  12. Omics Tools

    Energy Science and Technology Software Center (OSTI)

    2012-12-21

    The Omics Tools package provides several small trivial tools for work in genomics. This single portable package, the “omics.jar” file, is a toolbox that works in any Java-based environment, including PCs, Macs, and supercomputers. The number of tools is expected to grow. One tool (called cmsearch.hadoop or cmsearch.local), calls the external cmsearch program to predict non-coding RNA in a genome. The cmsearch program is part of the third-party Infernal package. Omics Tools does not containmore » Infernal. Infernal may be installed separately. The cmsearch.hadoop subtool requires Apache Hadoop and runs on a supercomputer, though cmsearch.local does not and runs on a server. Omics Tools does not contain Hadoop. Hadoop mat be installed separartely The other tools (cmgbk, cmgff, fastats, pal, randgrp, randgrpr, randsub) do not interface with third-party tools. Omics Tools is written in Java and Scala programming languages. Invoking the “help” command shows currently available tools, as shown below: schaumbe@gpint06:~/proj/omics$ java -jar omics.jar help Known commands are: cmgbk : compare cmsearch and GenBank Infernal hits cmgff : compare hits among two GFF (version 3) files cmsearch.hadoop : find Infernal hits in a genome, on your supercomputer cmsearch.local : find Infernal hits in a genome, on your workstation fastats : FASTA stats, e.g. # bases, GC content pal : stem-loop motif detection by palindromic sequence search (code stub) randgrp : random subsample without replacement, of groups randgrpr : random subsample with replacement, of groups (fast) randsub : random subsample without replacement, of file lines For more help regarding a particular command, use: java -jar omics.jar command help Usage: java -jar omics.jar command args« less

  13. Research Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Software & Tools Development Network R&D Software-Defined Networking (SDN) Experimental Network Testbeds Performance (perfSONAR) Software & Tools Development Data for Researchers Partnerships Publications Workshops Contact Us Technical Assistance: 1 800-33-ESnet (Inside US) 1 800-333-7638 (Inside US) 1 510-486-7600 (Globally) 1 510-486-7607 (Globally) Report Network Problems: trouble@es.net Provide Web Site Feedback: info@es.net Software & Tools Development Over the years, ESnet

  14. Category:EERE Analysis Tools | Open Energy Information

    Open Energy Info (EERE)

    policymakers can access energy analysis products related to renewable energy and energy efficiency, including published analyses, energy data and maps, and analysis tools such as...

  15. Outyear Budgeting Tool

    Energy Science and Technology Software Center (OSTI)

    2010-12-31

    OBTool performs the following: • Consistent method and tool to develop/estimate fiscal year (FY) 2010 and outyear budget/estimates • Maintain configuration control on resource rates and changes to outyear budget estimates, while allowing for accessibility, accountability, and tracking shared access between program managers, facility managers (FMs), project managers (PMs), cost account managers (CAMs), and project controls engineers (PCEs) • Consistency in budget estimating methodology, including scope, requirements, basis of estimates, resources, activities, escalation, and presentationmore » of documentation in tasks and execution plans and reports • Ability to sync (i.e. export) and import data into Primavera and Cobra to the lifecycle baseline file« less

  16. 2010 Solar Market Transformation Analysis and Tools

    SciTech Connect (OSTI)

    none,

    2010-04-01

    This document describes the DOE-funded solar market transformation analysis and tools under development in Fiscal Year 2010 so that stakeholders can access available resources and get engaged where interested.

  17. Software Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Software Tools Software Tools Copyright materials are released under different mechanisms: Open Source Software and Portfolio Software. CONTACT thumbnail of Kathleen McDonald Head of Intellectual Property, Business Development Executive Kathleen McDonald Richard P. Feynman Center for Innovation (505) 665-9090 Email The Richard P. Feynman Center for Innovation (FCI) releases copyright materials from Los Alamos under different mechanisms. Open Source Software GitHub Explore all open source

  18. Regulatory Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Regulatory Tools Home CRA - 2004 Final Recertification Decision CRA Comments & Responses CCA - 1996 CRA CARDs & TSDs CCA CARDs & TSDs Regulatory Tools Title 40 CFR Part 191 Environmental Radiation Protection Standards for Management and Disposal of Spent Nuclear Fuel, High-Level and Transuranic Radioactive Wastes. Title 40 CFR Part 194 Criteria for the Certification and Re-Certification of the Waste Isolation Pilot Plant's Compliance With the 40 CFR Part 191 Disposal Regulations.

  19. Policy and Analysis Data and Tools | Department of Energy

    Office of Environmental Management (EM)

    Policy and Analysis Data and Tools Policy and Analysis provides foundational datasets and web-accessible tools for EERE decision-makers and the public covering cost and performance ...

  20. Building energy analysis tool

    DOE Patents [OSTI]

    Brackney, Larry; Parker, Andrew; Long, Nicholas; Metzger, Ian; Dean, Jesse; Lisell, Lars

    2016-04-12

    A building energy analysis system includes a building component library configured to store a plurality of building components, a modeling tool configured to access the building component library and create a building model of a building under analysis using building spatial data and using selected building components of the plurality of building components stored in the building component library, a building analysis engine configured to operate the building model and generate a baseline energy model of the building under analysis and further configured to apply one or more energy conservation measures to the baseline energy model in order to generate one or more corresponding optimized energy models, and a recommendation tool configured to assess the one or more optimized energy models against the baseline energy model and generate recommendations for substitute building components or modifications.

  1. MotorMaster+ Software Tool Brochure | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Software Tool Brochure MotorMaster+ Software Tool Brochure This brochure provides information on AMO's MotorMaster+ software tool, including how it works, next steps, and how to access it. MotorMaster+ Brochure (2.48 MB) More Documents & Publications MotorMaster+ International Fact Sheet MotorMaster+ Fact Sheet MotorMaster+ Tool

  2. LANL access restrictions lifted

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    lifted LANL access restrictions lifted Vehicle access points on West Jemez Road will be open to non-badge holders. August 6, 2012 Los Alamos National Laboratory sits on top of a...

  3. Accessing Online COR Training

    Office of Energy Efficiency and Renewable Energy (EERE)

    Contracting Officer’s Representative (COR) training is now be available in an online format. "Accessing Online COR Training" provides a step-by-step guide to access the online COR course. 

  4. Access to the ALS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Gate Access Access to the ALS Print User Access The ALS experiment floor (Building 6) is a Controlled Access Area for radiation protection. All ALS users are required to register with the ALS User Services Office and take safety training (see Complete Safety Training ) before they are issued a Berkeley Lab ID badge and granted access to the facility. Note: Users arriving at the ALS outside registration business hours (Monday-Friday 8:00 a.m.-4:00 p.m.) must notify the User Office in advance and

  5. Downhole tool

    DOE Patents [OSTI]

    Hall, David R.; Muradov, Andrei; Pixton, David S.; Dahlgren, Scott Steven; Briscoe, Michael A.

    2007-03-20

    A double shouldered downhole tool connection comprises box and pin connections having mating threads intermediate mating primary and secondary shoulders. The connection further comprises a secondary shoulder component retained in the box connection intermediate a floating component and the primary shoulders. The secondary shoulder component and the pin connection cooperate to transfer a portion of makeup load to the box connection. The downhole tool may be selected from the group consisting of drill pipe, drill collars, production pipe, and reamers. The floating component may be selected from the group consisting of electronics modules, generators, gyroscopes, power sources, and stators. The secondary shoulder component may comprises an interface to the box connection selected from the group consisting of radial grooves, axial grooves, tapered grooves, radial protrusions, axial protrusions, tapered protrusions, shoulders, and threads.

  6. Keys to Access: Argonne-INCREASE partnership opens doors to collaborat...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Lacking access to world-class research tools limits the types of questions a cancer researcher or aerospace engineer can ask. This lack of access also limits their ability to...

  7. Accessing DOE's Many Energy Efficiency Resources and Technical Assistance

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    | Department of Energy Accessing DOE's Many Energy Efficiency Resources and Technical Assistance Accessing DOE's Many Energy Efficiency Resources and Technical Assistance Discusses current DOE programs and key resources (documents, tools) that can support program administrators and planners interested in pursuing energy efficiency. Accessing DOE's Many Energy Efficiency Resources and Technical Assistance (298.55 KB) More Documents & Publications How Energy Efficiency Programs Can Support

  8. Access to Capital Roundtable

    Broader source: Energy.gov (indexed) [DOE]

    ... State of Washington Chahalis and Great Wolf Lodge Streamlined environmental approval and process Price advantages due to tax preference Access to NMTC, USDA, DOE, ...

  9. Energy Data Access

    Broader source: Energy.gov [DOE]

    Access to energy data presents a significant opportunity for many organizations interested in energy management, benchmarking, disclosure, and energy efficiency services.

  10. Access to Capital

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    IPR 2008 Capital Investment Review CIR 2012 Quarterly Business Review Focus 2028 2011 Strategic Capital Discussions Access to Capital Debt Optimization Asset Management Cost...

  11. An Automated JHA Tool, Making Safety Accessible | Department of Energy

    Office of Environmental Management (EM)

    Ecosystem | Department of Energy Amped Up! Magazine - Accelerating Clean Energy through an Innovation Ecosystem Amped Up! Magazine - Accelerating Clean Energy through an Innovation Ecosystem Amped Up! Magazine features new Acting Assistant Secretary David Friedman and his vision for moving EERE forward as well as the office's efforts in building an innovation ecosystem to accelerate clean energy ideas to the marketplace. In This Issue cover replacement.png Friedman Primed to Pace America's

  12. An Automated JHA Tool Making Safety Accessible Presentation

    Office of Environmental Management (EM)

    An Assessment of Heating Fuels And Electricity Markets During the Winters of 2013-2014 and 2014-2015 October 2015 This page intentionally blank For Further Information This report was prepared under the auspices of the Energy Infrastructure Modeling and Analysis (EIMA) division of the Office of Electricity Delivery and Energy Reliability (OE). OE's vision is a U.S. energy delivery system that is reliable in the face of all hazards and resilient to disruptions, supports U.S. economic

  13. Document Flowdown Tool

    SciTech Connect (OSTI)

    2010-12-31

    DFTool performs the following: ? A tool to conduct, capture, document, and manage a systematic review and flowdown of contractual requirements/documents to the site, facility, and project-level implementing documents. ? Ability to alert/email document owners to impending changes/updates and impacts to upper-level linked documents. ? Custom ability to generate reports and/or include custom functionalities based on other needs or consideration for site use. ? Ability to be accessed by all personnel (particularly document owners). ? Shows both document flow-up and flow-down. ? Provides visibility where links/flowdown does not currently exist or is incorrect so it can be changed/updated (no visibility currently exists). ? Ability to capture requirements and ultimately link to an existing/proven requirements-based commitment tracking system which can be used (electively) at the facility/organizational-level

  14. Document Flowdown Tool

    Energy Science and Technology Software Center (OSTI)

    2010-12-31

    DFTool performs the following: • A tool to conduct, capture, document, and manage a systematic review and flowdown of contractual requirements/documents to the site, facility, and project-level implementing documents. • Ability to alert/email document owners to impending changes/updates and impacts to upper-level linked documents. • Custom ability to generate reports and/or include custom functionalities based on other needs or consideration for site use. • Ability to be accessed by all personnel (particularly document owners). •more » Shows both document flow-up and flow-down. • Provides visibility where links/flowdown does not currently exist or is incorrect so it can be changed/updated (no visibility currently exists). • Ability to capture requirements and ultimately link to an existing/proven requirements-based commitment tracking system which can be used (electively) at the facility/organizational-level« less

  15. Accessibility - Hanford Site

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of Energy is committed to providing access to our Web pages for individuals with disabilities. To meet this committment, this site is built to comply with the requirements of...

  16. Remote Access Options

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... Applications Features Blackberry (if applicable) Outlook Web Access (OWA) Citrix Workplace WebVPN AnyConnect VPN All methods other than Blackberry require a RSA Token Email 1 ...

  17. VEHICLE ACCESS PORTALS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ACCESS PORTALS Changes Effective January 11, 2010 Traffic Lane 1: No stop required. Drivers must slow down to 15 MPH while nearing and driving through the lane Traffic Lane 2:...

  18. Application note : using open source schematic capture tools with Xyce.

    SciTech Connect (OSTI)

    Russo, Thomas V.

    2013-08-01

    The development of the XyceTM Parallel Electronic Simulator has focused entirely on the creation of a fast, scalable simulation tool, and has not included any schematic capture or data visualization tools. This application note will describe how to use the open source schematic capture tool gschem and its associated netlist creation tool gnetlist to create basic circuit designs for Xyce, and how to access advanced features of Xyce that are not directly supported by either gschem or gnetlist.

  19. Caf Systems Express Access Form

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Cognos Report Access checkboxes (as applicable). Access to Monthly Financials & Supply Chain folders is included with any selections below. BudgetCOA - Capital project,...

  20. Clean Cities Offers Fleets New Tool to Evaluate Benefits of Alternativ...

    Energy Savers [EERE]

    The AFLEET Tool requires Microsoft Excel to run and may be downloaded free from Argonne National Laboratory or accessed through the Alternative Fuels Data Center. Addthis Related ...

  1. Public Access Policy and Communications | DOE PAGES

    Office of Scientific and Technical Information (OSTI)

    Public Access Policy and Communications Public Access Policy and Communications 72414 Department of Energy Public Access Plan DOE Public Access Plan 22213 White House Office of ...

  2. Public Access Policy and Communications | DOE PAGES

    Office of Scientific and Technical Information (OSTI)

    DOE PAGES Public Access Policy and Communications Public Access Policy and Communications 72414 Department of Energy Public Access Plan DOE Public Access Plan 22213 White House ...

  3. REMOTE ACCESS SERVICES | Department of Energy

    Office of Environmental Management (EM)

    Energy IT Services (EITS) Remote Access Services: Outlook Web Access RSA Token Login RSA ... Energy Information Administration (EIA) Remote Access Services Outlook Web Access EIA VPN ...

  4. ACCESS Project: Final Report

    SciTech Connect (OSTI)

    Weller, Heiko

    2015-04-01

    The ACCESS project addressed the development, testing, and demonstration of the proposed advanced technologies and the associated emission and fuel economy improvement at an engine dynamometer and on a full-scale vehicle. Improve fuel economy by 25% with minimum performance penalties Achieve SULEV level emissions with gasoline Demonstrate multi-mode combustion engine management system

  5. Special Access Programs

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2011-03-29

    This Order is for OFFICIAL USE ONLY and will not be distributed on the Directives' Portal. For distribution, please contact the Executive Secretary of the Special Access Program Oversight Committee at (202) 586-3345. Does not cancel/supersede other directives.

  6. Component Modeling Approach Software Tool

    SciTech Connect (OSTI)

    2010-08-23

    The Component Modeling Approach Software Tool (CMAST) establishes a set of performance libraries of approved components (frames, glass, and spacer) which can be accessed for configuring fenestration products for a project, and btaining a U-factor, Solar Heat Gain Coefficient (SHGC), and Visible Transmittance (VT) rating for those products, which can then be reflected in a CMA Label Certificate for code compliance. CMAST is web-based as well as client-based. The completed CMA program and software tool will be useful in several ways for a vast array of stakeholders in the industry: Generating performance ratings for bidding projects Ascertaining credible and accurate performance data Obtaining third party certification of overall product performance for code compliance

  7. AIRMaster+ LogTool

    Broader source: Energy.gov [DOE]

    The AIRMaster+ LogTool is a companion tool to AIRMaster+ that helps industrial users determine the operating dynamics of a compressed system. Use the LogTool first to gather critical data in...

  8. Final Report: Correctness Tools for Petascale Computing

    SciTech Connect (OSTI)

    Mellor-Crummey, John

    2014-10-27

    In the course of developing parallel programs for leadership computing systems, subtle programming errors often arise that are extremely difficult to diagnose without tools. To meet this challenge, University of Maryland, the University of Wisconsin—Madison, and Rice University worked to develop lightweight tools to help code developers pinpoint a variety of program correctness errors that plague parallel scientific codes. The aim of this project was to develop software tools that help diagnose program errors including memory leaks, memory access errors, round-off errors, and data races. Research at Rice University focused on developing algorithms and data structures to support efficient monitoring of multithreaded programs for memory access errors and data races. This is a final report about research and development work at Rice University as part of this project.

  9. Preset pivotal tool holder

    DOE Patents [OSTI]

    Asmanes, Charles

    1979-01-01

    A tool fixture is provided for precise pre-alignment of a radiused edge cutting tool in a tool holder relative to a fixed reference pivot point established on said holder about which the tool holder may be selectively pivoted relative to the fixture base member to change the contact point of the tool cutting edge with a workpiece while maintaining the precise same tool cutting radius relative to the reference pivot point.

  10. Software and Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Software and Tools Software and Tools The table below shows the software installed on Euclid that is managed by modules. Package Category Version Module Install Date Date Made ...

  11. Template Discontinuation Access

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    FOR SUBJECT FROM: Personnel Security Program Manager SUBJECT: Discontinuation of Access Eligibility Determination Reference is made to your Questionnaire for National Security Positions signed on [insert date], which was forwarded to this office in connection with a Department of Energy security clearance request. A review of that form disclosed recent use of illegal drugs. [Insert a brief description of the circumstances such as: Specifically, you listed marijuana use 1 time in 5/02; 1 time in

  12. ARM - Metadata Management Tool

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    FormsMetadata Management Tool Ingest Ingest Workflow Graphic Supporting Workflow Documentation Supporting Tools and Forms Process Configuration Manager (PCM) Metadata Management Tool (MMT) ARM Data Integrator (ADI) Ingest Readiness Form Associated Status Reports Contacts Engineering Processes Engineering Home Workflow Graphic Engineering Workflow Document Tools for Workflow ECR ECO BCR Ingests Value-Added Products Reprocessing Instruments Data System Elements Field Campaign Startup Metadata

  13. Tools | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Information Resources » Tools Tools Below are links to tools that assist users with project planning and analysis. Spectrally Enhanced Lighting Spectrally Enhanced Lighting (SEL) is a cost-effective, low-risk design method for achieving significant energy savings by shifting lamp color from the warmer to the cooler (whiter) end of the color spectrum, more closely matching daylight. Residential Lighting Usage Estimate Tool The Residential Lighting Usage Estimate Tool is a companion to the

  14. Performance and Debugging Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Tools Performance and Debugging Tools NERSC provides many popular debugging and profiling tools. Some of them are general-purpose tools and others are geared toward more specific tasks. A quick guideline on when to use which debugging tool is as follows: DDT and TotalView: general purpose parallel debuggers allowing users to interactively control the pace of execution of a program using a graphical user interface gdb: serial command line mode debugger; can be useful in quickly examining core

  15. Interactive Activity Detection Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Activity Detection Tools Interactive Activity Detection Tools Tools for detecting specified activities in video data provide a key intelligence capability. High numbers of false alarms, however, reduce tool effectiveness and analyst patience. User feedback reduces false alarms * This project will reduce the number of false alarms generated by activity detection tools (including single vehicle start / stop, multi-vehicle meetings and coordinated driving patterns) by exploiting user feedback in a

  16. Improved tool grinding machine

    DOE Patents [OSTI]

    Dial, C.E. Sr.

    The present invention relates to an improved tool grinding mechanism for grinding single point diamond cutting tools to precise roundness and radius specifications. The present invention utilizes a tool holder which is longitudinally displaced with respect to the remainder of the grinding system due to contact of the tool with the grinding surface with this displacement being monitored so that any variation in the grinding of the cutting surface such as caused by crystal orientation or tool thicknesses may be compensated for during the grinding operation to assure the attainment of the desired cutting tool face specifications.

  17. Tool grinding machine

    DOE Patents [OSTI]

    Dial, Sr., Charles E.

    1980-01-01

    The present invention relates to an improved tool grinding mechanism for grinding single point diamond cutting tools to precise roundness and radius specifications. The present invention utilizes a tool holder which is longitudinally displaced with respect to the remainder of the grinding system due to contact of the tool with the grinding surface with this displacement being monitored so that any variation in the grinding of the cutting surface such as caused by crystal orientation or tool thickness may be compensated for during the grinding operation to assure the attainment of the desired cutting tool face specifications.

  18. Software and Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Software and Tools Software and Tools The table below shows the software installed on Euclid that is managed by modules. Package Category Version Module Install Date Date Made Default Last edited: 2016-03-21 13:44:4

  19. ARM - Data Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    govDataData Tools Data Tools Software for Working with ARM NetCDF Data Most ARM data are archived and made available as time-series data in netCDF format. NetCDF (designed by ...

  20. ARM - Data Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    govData Tools Data Tools Software for Working with ARM NetCDF Data Most ARM data are archived and made available as time-series data in netCDF format. NetCDF (designed by Unidata) ...

  1. Caliper and contour tool

    DOE Patents [OSTI]

    Fink, Conrad F. (Los Alamos, NM)

    1981-01-01

    The disclosure relates to a tool for borehole logging comprising a plurality of extendable caliper arms to determine borehole contour.

  2. Caliper and contour tool

    DOE Patents [OSTI]

    Fink, C.F.

    The disclosure relates to a tool for borehole logging comprising a plurality of extendable caliper arms to determine borehole contour.

  3. Demand Response Dispatch Tool

    SciTech Connect (OSTI)

    2012-08-31

    The Demand Response (DR) Dispatch Tool uses price profiles to dispatch demand response resources and create load modifying profiles. These annual profiles are used as inputs to production cost models and regional planning tools (e.g., PROMOD). The tool has been effectively implemented in transmission planning studies conducted by the Western Electricity Coordinating Council via its Transmission Expansion Planning and Policy Committee. The DR Dispatch Tool can properly model the dispatch of DR resources for both reliability and economic conditions.

  4. OOTW COST TOOLS

    SciTech Connect (OSTI)

    HARTLEY, D.S.III; PACKARD, S.L.

    1998-09-01

    This document reports the results of a study of cost tools to support the analysis of Operations Other Than War (OOTW). It recommends the continued development of the Department of Defense (DoD) Contingency Operational Support Tool (COST) as the basic cost analysis tool for 00TWS. It also recommends modifications to be included in future versions of COST and the development of an 00TW mission planning tool to supply valid input for costing.

  5. Fluid sampling tool

    DOE Patents [OSTI]

    Garcia, Anthony R.; Johnston, Roger G.; Martinez, Ronald K.

    2000-01-01

    A fluid-sampling tool for obtaining a fluid sample from a container. When used in combination with a rotatable drill, the tool bores a hole into a container wall, withdraws a fluid sample from the container, and seals the borehole. The tool collects fluid sample without exposing the operator or the environment to the fluid or to wall shavings from the container.

  6. Optics assembly for high power laser tools

    DOE Patents [OSTI]

    Fraze, Jason D.; Faircloth, Brian O.; Zediker, Mark S.

    2016-06-07

    There is provided a high power laser rotational optical assembly for use with, or in high power laser tools for performing high power laser operations. In particular, the optical assembly finds applications in performing high power laser operations on, and in, remote and difficult to access locations. The optical assembly has rotational seals and bearing configurations to avoid contamination of the laser beam path and optics.

  7. Creating solar media nets solar tools, publicity

    SciTech Connect (OSTI)

    Brewer, B.

    1980-01-01

    The utilization of locally produced solar tool to gain more access to commercial media is discussed. Central is a strategy of (1) giving commercial media something to report, (2) helping educate the media, and (3) simultaneously impacting that portion of the public which is likely to be most interested. Methods for reaching several target audiences include a Solar Calendar, a Passive Solar Film, a local Solar Directory, a local Solar Information Center, an Emergency Coolth brochure and a Conservation/Solar Retrofit Guide.

  8. Component Modeling Approach Software Tool

    Energy Science and Technology Software Center (OSTI)

    2010-08-23

    The Component Modeling Approach Software Tool (CMAST) establishes a set of performance libraries of approved components (frames, glass, and spacer) which can be accessed for configuring fenestration products for a project, and btaining a U-factor, Solar Heat Gain Coefficient (SHGC), and Visible Transmittance (VT) rating for those products, which can then be reflected in a CMA Label Certificate for code compliance. CMAST is web-based as well as client-based. The completed CMA program and software toolmore » will be useful in several ways for a vast array of stakeholders in the industry: Generating performance ratings for bidding projects Ascertaining credible and accurate performance data Obtaining third party certification of overall product performance for code compliance« less

  9. Techniques to Access Databases and Integrate Data for Hydrologic Modeling

    SciTech Connect (OSTI)

    Whelan, Gene; Tenney, Nathan D.; Pelton, Mitchell A.; Coleman, Andre M.; Ward, Duane L.; Droppo, James G.; Meyer, Philip D.; Dorow, Kevin E.; Taira, Randal Y.

    2009-06-17

    This document addresses techniques to access and integrate data for defining site-specific conditions and behaviors associated with ground-water and surface-water radionuclide transport applicable to U.S. Nuclear Regulatory Commission reviews. Environmental models typically require input data from multiple internal and external sources that may include, but are not limited to, stream and rainfall gage data, meteorological data, hydrogeological data, habitat data, and biological data. These data may be retrieved from a variety of organizations (e.g., federal, state, and regional) and source types (e.g., HTTP, FTP, and databases). Available data sources relevant to hydrologic analyses for reactor licensing are identified and reviewed. The data sources described can be useful to define model inputs and parameters, including site features (e.g., watershed boundaries, stream locations, reservoirs, site topography), site properties (e.g., surface conditions, subsurface hydraulic properties, water quality), and site boundary conditions, input forcings, and extreme events (e.g., stream discharge, lake levels, precipitation, recharge, flood and drought characteristics). Available software tools for accessing established databases, retrieving the data, and integrating it with models were identified and reviewed. The emphasis in this review was on existing software products with minimal required modifications to enable their use with the FRAMES modeling framework. The ability of four of these tools to access and retrieve the identified data sources was reviewed. These four software tools were the Hydrologic Data Acquisition and Processing System (HDAPS), Integrated Water Resources Modeling System (IWRMS) External Data Harvester, Data for Environmental Modeling Environmental Data Download Tool (D4EM EDDT), and the FRAMES Internet Database Tools. The IWRMS External Data Harvester and the D4EM EDDT were identified as the most promising tools based on their ability to access and

  10. Tool setting device

    DOE Patents [OSTI]

    Brown, Raymond J.

    1977-01-01

    The present invention relates to a tool setting device for use with numerically controlled machine tools, such as lathes and milling machines. A reference position of the machine tool relative to the workpiece along both the X and Y axes is utilized by the control circuit for driving the tool through its program. This reference position is determined for both axes by displacing a single linear variable displacement transducer (LVDT) with the machine tool through a T-shaped pivotal bar. The use of the T-shaped bar allows the cutting tool to be moved sequentially in the X or Y direction for indicating the actual position of the machine tool relative to the predetermined desired position in the numerical control circuit by using a single LVDT.

  11. Remote Access | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Ames Laboratory Information Systems supports VPN for remotely accessing internal computers and network services. These are: Once connected remotely to Ames Laboratory,...

  12. Atomic memory access hardware implementations

    SciTech Connect (OSTI)

    Ahn, Jung Ho; Erez, Mattan; Dally, William J

    2015-02-17

    Atomic memory access requests are handled using a variety of systems and methods. According to one example method, a data-processing circuit having an address-request generator that issues requests to a common memory implements a method of processing the requests using a memory-access intervention circuit coupled between the generator and the common memory. The method identifies a current atomic-memory access request from a plurality of memory access requests. A data set is stored that corresponds to the current atomic-memory access request in a data storage circuit within the intervention circuit. It is determined whether the current atomic-memory access request corresponds to at least one previously-stored atomic-memory access request. In response to determining correspondence, the current request is implemented by retrieving data from the common memory. The data is modified in response to the current request and at least one other access request in the memory-access intervention circuit.

  13. Access, Compiling and Running Jobs

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Access Compiling and Running Jobs Access, Compiling and Running Jobs Access Dirac Dirac can be accessed by logging into carver.nersc.gov. Compile To compile your code, you need to land on a dirac compute node 1st: qsub -q dirac_reg -l nodes=1 -l walltime=00:30:00 -I After you are inside the job, you can load the necessary module for compile: module unload pgi module unload openmpi module unload cuda module load gcc-sl6 module load openmpi-gcc-sl6 module load cuda Now you can compile your code.

  14. Remote direct memory access

    DOE Patents [OSTI]

    Archer, Charles J.; Blocksome, Michael A.

    2012-12-11

    Methods, parallel computers, and computer program products are disclosed for remote direct memory access. Embodiments include transmitting, from an origin DMA engine on an origin compute node to a plurality target DMA engines on target compute nodes, a request to send message, the request to send message specifying a data to be transferred from the origin DMA engine to data storage on each target compute node; receiving, by each target DMA engine on each target compute node, the request to send message; preparing, by each target DMA engine, to store data according to the data storage reference and the data length, including assigning a base storage address for the data storage reference; sending, by one or more of the target DMA engines, an acknowledgment message acknowledging that all the target DMA engines are prepared to receive a data transmission from the origin DMA engine; receiving, by the origin DMA engine, the acknowledgement message from the one or more of the target DMA engines; and transferring, by the origin DMA engine, data to data storage on each of the target compute nodes according to the data storage reference using a single direct put operation.

  15. Alternative Fuels Data Center: Tools

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Tools to someone by E-mail Share Alternative Fuels Data Center: Tools on Facebook Tweet about Alternative Fuels Data Center: Tools on Twitter Bookmark Alternative Fuels Data Center: Tools on Google Bookmark Alternative Fuels Data Center: Tools on Delicious Rank Alternative Fuels Data Center: Tools on Digg Find More places to share Alternative Fuels Data Center: Tools on AddThis.com... Tools The Alternative Fuels Data Center offers a large collection of helpful tools. These calculators,

  16. Machine tool locator

    DOE Patents [OSTI]

    Hanlon, John A.; Gill, Timothy J.

    2001-01-01

    Machine tools can be accurately measured and positioned on manufacturing machines within very small tolerances by use of an autocollimator on a 3-axis mount on a manufacturing machine and positioned so as to focus on a reference tooling ball or a machine tool, a digital camera connected to the viewing end of the autocollimator, and a marker and measure generator for receiving digital images from the camera, then displaying or measuring distances between the projection reticle and the reference reticle on the monitoring screen, and relating the distances to the actual position of the autocollimator relative to the reference tooling ball. The images and measurements are used to set the position of the machine tool and to measure the size and shape of the machine tool tip, and examine cutting edge wear. patent

  17. Wachs Cutter Tooling Station (4495)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    purchase, build and install Wachs cutter tooling. The Wachs Cutter Tooling Station is similar to previously operated facility tooling and will utilize an existing hydraulic unit....

  18. Software Tools | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Windows and Building Envelope » Software Tools Software Tools See past projects. Fenestration Software Tools Lead Performer: Lawrence Berkeley National Laboratory - Berkeley, CA

  19. HPC_Tools.pptx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    5, 2011 * Introduction * Debugging * Performance / Optimization Outline 3 * Scope of Today's Talks - Debugging and optimization tools - Some basic strategies * Take Aways - Common problems and strategies - How tools work in general - A few specific tools you can try Introduction 4 * Types of problems - "Serial" * Invalid memory references * Array reference out of bounds * Divide by zero * Uninitialized variables - Parallel * Unmatched sends/receives * Blocking receive before

  20. Demand Response Analysis Tool

    Energy Science and Technology Software Center (OSTI)

    2012-03-01

    Demand Response Analysis Tool is a software developed at the Lawrence Berkeley National Laboratory. It is initially funded by Southern California Edison. Our goal in developing this tool is to provide an online, useable, with standardized methods, an analysis tool to evaluate demand and demand response performance of commercial and industrial facilities. The tool provides load variability and weather sensitivity analysis capabilities as well as development of various types of baselines. It can be usedmore » by researchers, real estate management firms, utilities, or any individuals who are interested in analyzing their demand and demand response capabilities.« less

  1. Lustre Administrative Tool

    Energy Science and Technology Software Center (OSTI)

    2003-12-24

    The Lustre Administrative Tools (LAT) is a set of programs and utilities designed to facilitate management of the Lustre File System by System Administrators.

  2. Manifold tool guide

    DOE Patents [OSTI]

    Djordjevic, A.

    1983-12-27

    A tool guide is described that makes possible the insertion of cleaning and/or inspection tools into a manifold pipe that will dislocate and extract the accumulated sediment in such manifold pipes. The tool guide basically comprises a right angled tube (or other angled tube as required) which can be inserted in a large tube and locked into a radially extending cross pipe by adjustable spacer rods and a spring-loaded cone, whereby appropriate cleaning tools can be inserted into the cross pipe for cleaning, inspection, etc. 3 figs.

  3. Manifold tool guide

    DOE Patents [OSTI]

    Djordjevic, Aleksandar

    1983-12-27

    A tool guide that makes possible the insertion of cleaning and/or inspection tools into a manifold pipe that will dislocate and extract the accumulated sediment in such manifold pipes. The tool guide basically comprises a right angled tube (or other angled tube as required) which can be inserted in a large tube and locked into a radially extending cross pipe by adjustable spacer rods and a spring-loaded cone, whereby appropriate cleaning tools can be inserted into to cross pipe for cleaning, inspection, etc.

  4. Demand Response Dispatch Tool

    Energy Science and Technology Software Center (OSTI)

    2012-08-31

    The Demand Response (DR) Dispatch Tool uses price profiles to dispatch demand response resources and create load modifying profiles. These annual profiles are used as inputs to production cost models and regional planning tools (e.g., PROMOD). The tool has been effectively implemented in transmission planning studies conducted by the Western Electricity Coordinating Council via its Transmission Expansion Planning and Policy Committee. The DR Dispatch Tool can properly model the dispatch of DR resources for bothmore » reliability and economic conditions.« less

  5. Double diameter boring tool

    DOE Patents [OSTI]

    Ashbaugh, Fred N.; Murry, Kenneth R.

    1988-12-27

    A boring tool and a method of operation are provided for boring two concentric holes of precision diameters and depths in a single operation. The boring tool includes an elongated tool body, a shank for attachment to a standard adjustable boring head which is used on a manual or numerical control milling machine and first and second diametrically opposed cutting edges formed for cutting in opposite directions. The diameter of the elongated tool body is substantially equal to the distance from the first cutting edge tip to the axis of rotation plus the distance from the second cutting edge tip to the axis of rotation. The axis of rotation of the tool is spaced from the tool centerline a distance substantially equal to one-half the distance from the second cutting edge tip to the axis of rotation minus one-half the distance from the first cutting edge tip to the axis of rotation. The method includes the step of inserting the boring tool into the boring head, adjusting the distance between the tool centerline and the tool axis of rotation as described above and boring the two concentric holes.

  6. Double diameter boring tool

    DOE Patents [OSTI]

    Ashbaugh, F.A.; Murry, K.R.

    1986-02-10

    A boring tool and a method of operation are provided for boring two concentric holes of precision diameters and depths in a single operation. The boring tool includes an elongated tool body, a shank for attachment to a standard adjustable boring head which is used on a manual or numerical control milling machine and first and second diametrically opposed cutting flutes formed for cutting in opposite directions. The diameter of the elongated tool body is substantially equal to the distance from the first flute tip to the axis of rotation plus the distance from the second flute tip to the axis of rotation. The axis of rotation of the tool is spaced from the tool centerline a distance substantially equal to one-half the distance from the second flute tip to the axis of rotation minus one-half the distance from the first flute tip to the axis of rotation. The method includes the step of inserting the boring tool into the boring head, adjusting the distance between the tool centerline and the tool axis of rotation as described above and boring the two concentric holes.

  7. Air Sparging Decision Tool

    Energy Science and Technology Software Center (OSTI)

    1996-06-10

    The Air Sparging Decision Tool is a computer decision aid to help environmental managers and field practitioners in evaluating the applicability of air sparging to a wide range of sites and for refining the operation of air sparging systems. The program provides tools for the practitioner to develop the conceptual design for an air sparging system suitable for the identified site. The Tool provides a model of the decision making process, not a detailed designmore » of air sparging systems. The Tool will quickly and cost effectively assist the practitioner in screening for applicability of the technology at a proposed site.« less

  8. lustre-tools-llnl

    Energy Science and Technology Software Center (OSTI)

    2010-12-17

    lustre-tools-llnl is a small set of commands that are helpful for using and administering a lustre file system.

  9. Demand Response Analysis Tool

    SciTech Connect (OSTI)

    2012-03-01

    Demand Response Analysis Tool is a software developed at the Lawrence Berkeley National Laboratory. It is initially funded by Southern California Edison. Our goal in developing this tool is to provide an online, useable, with standardized methods, an analysis tool to evaluate demand and demand response performance of commercial and industrial facilities. The tool provides load variability and weather sensitivity analysis capabilities as well as development of various types of baselines. It can be used by researchers, real estate management firms, utilities, or any individuals who are interested in analyzing their demand and demand response capabilities.

  10. EE Maximization Tool

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    News & Events Skip navigation links Marketing Resources Reports, Publications, and Research Utility Toolkit Utility Potential Calculator EE Maximization Tool Conduit Utility...

  11. AIRMaster+ Tool Introduction

    Broader source: Energy.gov [DOE]

    This presentation discusses typical compressed air system operation and discusses methods of system efficiency improvement through use of the AIRMaster+ and CAC LogTool software.

  12. Strain gauge installation tool

    DOE Patents [OSTI]

    Conard, Lisa Marie

    1998-01-01

    A tool and a method for attaching a strain gauge to a test specimen by maaining alignment of, and applying pressure to, the strain gauge during the bonding of the gauge to the specimen. The tool comprises rigid and compliant pads attached to a spring-loaded clamp. The pads are shaped to conform to the specimen surface to which the gauge is to be bonded. The shape of the pads permits the tool to align itself to the specimen and to maintain alignment of the gauge to the specimen during the bond curing process. A simplified method of attaching a strain gauge is provided by use of the tool.

  13. Manifold tool guide

    DOE Patents [OSTI]

    Djordjevic, A.

    1982-07-08

    A tool guide that makes possible the insertion of cleaning and/or inspection tools into a manifold pipe that will dislocate and extract the accumulated sediment in such manifold pipes. The tool guide basically comprises a right angled tube (or other angled tube as required) which can be inserted in a large tube and locked into a radially extending cross pipe by adjustable spacer rods and a spring-loaded cone, whereby appropriate cleaning tools can be inserted into to cross pipe for cleaning, inspection, etc.

  14. Prototyping Regional Discrimination Tools with Matseis

    SciTech Connect (OSTI)

    Chael, Eric; Harris, Mark; Young, Chris; Mayeda, Kevin; Walter, William; Taylor, Steve; Velasco, Aaron

    1999-08-03

    To facilitate the development testing and comparison of regional seismic discriminants, we have implemented some of the most promising techniques in Matseis, a-Matlab-based seismic processing toolkit. The existing Matseis package provides graphical tools for analyzing seismic data from a network of stations. It can access data via a CSS 3.0 database, or from static files in a format defined by the user. Waveforms are displayed in a record-section format, with overlays for IASPE191 travel-time curves. The user can pick arrivals and locate events, then show the results on a map. Tools are available for spectral and polarization measurements, as well as beam forming and f-k analysis with array data. Additionally, one has full access to the Matlab environment and any functions available there, as well as to portions of the U.S. Department of Energy Knowledge Base. Recently, we have added some new tools to Matseis for calculating regional discrimination measurements. The first of these performs Lg coda analysis as developed by Mayeda and coworkers at Lawrence Livermore National Laboratory (LLNL). Lg coda magnitudes are calculated from the amplitudes of the coda envelopes in narrow frequency bands. Ratios of these amplitudes between high- and low-frequency bands provide a spectral-ratio discriminant for regional events. The second tool we have implemented measures P/Lg phase ratios, using the MDAC technique of Taylor (Los Alamos National Laboratory) and Walter (LLNL). P and Lg amplitudes are obtained at select frequencies, then corrected for source magnitude and propagation path. Finally, we added a tool for analyzing long-period Rayleigh and Love arrivals, useful for moment:magnitude and LQ:LR discrimination. Because all these tools have been written as Matlab functions, they can be easily modified to experiment with different processing details. The performance of the discriminants can be evaluated using any event available in the database.

  15. Fluid sampling tool

    DOE Patents [OSTI]

    Johnston, Roger G.; Garcia, Anthony R. E.; Martinez, Ronald K.

    2001-09-25

    The invention includes a rotatable tool for collecting fluid through the wall of a container. The tool includes a fluid collection section with a cylindrical shank having an end portion for drilling a hole in the container wall when the tool is rotated, and a threaded portion for tapping the hole in the container wall. A passageway in the shank in communication with at least one radial inlet hole in the drilling end and an opening at the end of the shank is adapted to receive fluid from the container. The tool also includes a cylindrical chamber affixed to the end of the shank opposite to the drilling portion thereof for receiving and storing fluid passing through the passageway. The tool also includes a flexible, deformable gasket that provides a fluid-tight chamber to confine kerf generated during the drilling and tapping of the hole. The invention also includes a fluid extractor section for extracting fluid samples from the fluid collecting section.

  16. OOTW Force Design Tools

    SciTech Connect (OSTI)

    Bell, R.E.; Hartley, D.S.III; Packard, S.L.

    1999-05-01

    This report documents refined requirements for tools to aid the process of force design in Operations Other Than War (OOTWs). It recommends actions for the creation of one tool and work on other tools relating to mission planning. It also identifies the governmental agencies and commands with interests in each tool, from whom should come the user advisory groups overseeing the respective tool development activities. The understanding of OOTWs and their analytical support requirements has matured to the point where action can be taken in three areas: force design, collaborative analysis, and impact analysis. While the nature of the action and the length of time before complete results can be expected depends on the area, in each case the action should begin immediately. Force design for OOTWs is not a technically difficult process. Like force design for combat operations, it is a process of matching the capabilities of forces against the specified and implied tasks of the operation, considering the constraints of logistics, transport and force availabilities. However, there is a critical difference that restricts the usefulness of combat force design tools for OOTWs: the combat tools are built to infer non-combat capability requirements from combat capability requirements and cannot reverse the direction of the inference, as is required for OOTWs. Recently, OOTWs have played a larger role in force assessment, system effectiveness and tradeoff analysis, and concept and doctrine development and analysis. In the first Quadrennial Defense Review (QDR), each of the Services created its own OOTW force design tool. Unfortunately, the tools address different parts of the problem and do not coordinate the use of competing capabilities. These tools satisfied the immediate requirements of the QDR, but do not provide a long-term cost-effective solution.

  17. DLFM library tools for large scale dynamic applications

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    DLFM library tools for large scale dynamic applications DLFM library tools for large scale dynamic applications Large scale Python and other dynamic applications may spend huge time at startup. The DLFM library, developed by Mike Davis at Cray, Inc., is a set of functions that can be incorporated into a dynamically-linked application to provide improved performance during the loading of dynamic libraries when running the application at large scale on Edison. To access this library, do module

  18. Integrated Layout and Optimization Tool for Solar Power Towers |

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Concentrating Solar Power | NREL Integrated Layout and Optimization Tool for Solar Power Towers The Solar Power Tower Integrated Layout and Optimization Tool (SolarPILOT(tm)) generates and characterizes power tower (central receiver) systems. This software was developed by the National Renewable Energy Laboratory (NREL). SolarPILOT consists of a graphical user interface (GUI) and an application programming interface (API) through which external programs can access SolarPILOT's functionality.

  19. Eclipse Parallel Tools Platform

    Energy Science and Technology Software Center (OSTI)

    2005-02-18

    Designing and developing parallel programs is an inherently complex task. Developers must choose from the many parallel architectures and programming paradigms that are available, and face a plethora of tools that are required to execute, debug, and analyze parallel programs i these environments. Few, if any, of these tools provide any degree of integration, or indeed any commonality in their user interfaces at all. This further complicates the parallel developer's task, hampering software engineering practices,more » and ultimately reducing productivity. One consequence of this complexity is that best practice in parallel application development has not advanced to the same degree as more traditional programming methodologies. The result is that there is currently no open-source, industry-strength platform that provides a highly integrated environment specifically designed for parallel application development. Eclipse is a universal tool-hosting platform that is designed to providing a robust, full-featured, commercial-quality, industry platform for the development of highly integrated tools. It provides a wide range of core services for tool integration that allow tool producers to concentrate on their tool technology rather than on platform specific issues. The Eclipse Integrated Development Environment is an open-source project that is supported by over 70 organizations, including IBM, Intel and HP. The Eclipse Parallel Tools Platform (PTP) plug-in extends the Eclipse framwork by providing support for a rich set of parallel programming languages and paradigms, and a core infrastructure for the integration of a wide variety of parallel tools. The first version of the PTP is a prototype that only provides minimal functionality for parallel tool integration of a wide variety of parallel tools. The first version of the PTP is a prototype that only provides minimal functionality for parallel tool integration, support for a small number of parallel architectures

  20. University Tools | OSTI, US Dept of Energy Office of Scientific and

    Office of Scientific and Technical Information (OSTI)

    Technical Information Library and University Tools Science Search Tools Home DOE Collections Journal Sources Library and University Tools U.S. Federal Agencies Global Databases Customized Resources OSTI connects with university research departments and libraries across the nation to increase awareness of DOE's valuable scientific and technical information. Department of Energy OSTI library tools are provided as a free service to librarians and the library community to expand access to and

  1. Laboratory Access | Sample Preparation Laboratories

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Access Planning Ahead Planning Ahead Please complete the Beam Time Request (BTR) and Support Request forms thourgh the User Portal. Thorough chemical and sample information must be included in your BTR. Support Request forms include a list of collaborators that require laboratory access and your group's laboratory equipment requests. Researcher safety is taken seriously at SLAC. Please remember that radioactive materials, nanomaterials, and biohazardous materials have additional safety

  2. Graphitic packing removal tool

    DOE Patents [OSTI]

    Meyers, Kurt Edward; Kolsun, George J.

    1997-01-01

    Graphitic packing removal tools for removal of the seal rings in one piece. he packing removal tool has a cylindrical base ring the same size as the packing ring with a surface finish, perforations, knurling or threads for adhesion to the seal ring. Elongated leg shanks are mounted axially along the circumferential center. A slit or slits permit insertion around shafts. A removal tool follower stabilizes the upper portion of the legs to allow a spanner wrench to be used for insertion and removal.

  3. Graphitic packing removal tool

    DOE Patents [OSTI]

    Meyers, K.E.; Kolsun, G.J.

    1997-11-11

    Graphitic packing removal tools for removal of the seal rings in one piece are disclosed. The packing removal tool has a cylindrical base ring the same size as the packing ring with a surface finish, perforations, knurling or threads for adhesion to the seal ring. Elongated leg shanks are mounted axially along the circumferential center. A slit or slits permit insertion around shafts. A removal tool follower stabilizes the upper portion of the legs to allow a spanner wrench to be used for insertion and removal. 5 figs.

  4. Other Workflow Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    This includes other tools in the workflow ecosystem as well as auxiliary services to ... In addition to MapReduce and a dsitributed File System (HDFS), Hadoop has a rich ecosystem ...

  5. Smart tool holder

    DOE Patents [OSTI]

    Day, Robert Dean; Foreman, Larry R.; Hatch, Douglas J.; Meadows, Mark S.

    1998-01-01

    There is provided an apparatus for machining surfaces to accuracies within the nanometer range by use of electrical current flow through the contact of the cutting tool with the workpiece as a feedback signal to control depth of cut.

  6. Energy Development Assistance Tool

    Broader source: Energy.gov [DOE]

    The Federal Energy Development Assistance tool provides information for Tribes about federal grant, loan, and technical assistance programs to support energy development and deployment in Indian Country and Alaska Native villages.

  7. Oracle Management Tool Suite

    Energy Science and Technology Software Center (OSTI)

    2007-06-01

    The Oracle Management Tool Suite is used to automatically manage Oracle based systems. This includes startup and shutdown of databases and application servers as well as backup, space management, workload management and log file management.

  8. Lustre Monitoring Tools

    Energy Science and Technology Software Center (OSTI)

    2007-05-05

    The Lustre Monitoring Tools software package is a set of utilities developed to facilitate real-time and historical monitoring of the performance of a Lustre FileSystem.

  9. UNIX Public Tools

    Office of Energy Efficiency and Renewable Energy (EERE)

    SATAN, the System Administrator Tool for Analyzing Networks, is a network security analyzer designed by Dan Farmer and Wietse Venema. SATAN scans systems connected to the network noting the...

  10. PV Hourly Simulation Tool

    Energy Science and Technology Software Center (OSTI)

    2010-12-31

    This software requires inputs of simple general building characteristics and usage information to calculate the energy and cost benefits of solar PV. This tool conducts and complex hourly simulation of solar PV based primarily on the area available on the rooftop. It uses a simplified efficiency calculation method and real panel characteristics. It includes a detailed rate structure to account for time-of-use rates, on-peak and off-peak pricing, and multiple rate seasons. This tool includes themore » option for advanced system design inputs if they are known. This tool calculates energy savings, demand reduction, cost savings, incentives and building life cycle costs including: simple payback, discounted payback, net-present value, and savings to investment ratio. In addition this tool also displays the environmental benefits of a project.« less

  11. Friction stir welding tool

    DOE Patents [OSTI]

    Tolle, Charles R.; Clark, Denis E.; Barnes, Timothy A.

    2008-04-15

    A friction stir welding tool is described and which includes a shank portion; a shoulder portion which is releasably engageable with the shank portion; and a pin which is releasably engageable with the shoulder portion.

  12. Strain gauge installation tool

    DOE Patents [OSTI]

    Conard, L.M.

    1998-06-16

    A tool and a method are disclosed for attaching a strain gauge to a test specimen by maintaining alignment of, and applying pressure to, the strain gauge during the bonding of the gauge to the specimen. The tool comprises rigid and compliant pads attached to a spring-loaded clamp. The pads are shaped to conform to the specimen surface to which the gauge is to be bonded. The shape of the pads permits the tool to align itself to the specimen and to maintain alignment of the gauge to the specimen during the bond curing process. A simplified method of attaching a strain gauge is provided by use of the tool. 6 figs.

  13. Overview of Station Analysis Tools Developed in Support of H2USA

    Broader source: Energy.gov [DOE]

    Access the recording and download presentation slides from the Fuel Cell Technologies Office webinar "Overview of Station Analysis Tools Developed in Support of H2USA" held on May 12, 2015.

  14. 2e Carbon Access | Open Energy Information

    Open Energy Info (EERE)

    e Carbon Access Jump to: navigation, search Name: 2e Carbon Access Place: New York, New York Zip: 10280 Sector: Carbon Product: 2E Carbon Access is an enterprise focused solely on...

  15. Biomass accessibility analysis using electron tomography

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Hinkle, Jacob D.; Ciesielski, Peter N.; Gruchalla, Kenny; Munch, Kristin R.; Donohoe, Bryon S.

    2015-12-25

    Substrate accessibility to catalysts has been a dominant theme in theories of biomass deconstruction. Furthermore, current methods of quantifying accessibility do not elucidate mechanisms for increased accessibility due to changes in microstructure following pretreatment.

  16. Device Simulation Tool - JCAP

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    PAZ0036_v2.jpg Device Simulation Tool Research Why Solar Fuels Goals & Objectives Thrust 1 Thrust 2 Thrust 3 Thrust 4 Publications Research Highlights Videos Innovations User Facilities Expert Team Benchmarking Database Device Simulation Tool XPS Spectral Database Research Introduction Why Solar Fuels? Goals & Objectives Thrusts Thrust 1 Thrust 2 Thrust 3 Thrust 4 Library Publications Research Highlights Videos Resources User Facilities Expert Team Benchmarking Database Device Simulation

  17. Tools for Public Information

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Energy Tools for Discovery Offer Potential Hope for Huntington's Tools for Discovery Offer Potential Hope for Huntington's May 25, 2011 - 3:24pm Addthis Flora Meilleur prepares protein solutions for structural investigation with neutrons. | Courtesy of ORNL Flickr / Jason Richards Flora Meilleur prepares protein solutions for structural investigation with neutrons. | Courtesy of ORNL Flickr / Jason Richards Charles Rousseaux Charles Rousseaux Senior Communications Specialist (detailee) What

  18. Velo: Knowledge and Tool

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Velo: Knowledge and Tool Integration for Collaborative Scientific Projects Carina Lansing, Kerstin Kleese van Dam 1 Scientific Project Life Cycle 2 Conceptual Modeling Simulation Execution Visualization & Analytics Data Input Data Uncertainty Quantification Validation, Diagnostics, & Monitoring Reference Data / Data Mining Challenges to Scientists ! Has someone done something similar before? Is there a good example? ! How do I find the information I need? ! What are the best tools to

  19. Visitor Hanford Computer Access Request - Hanford Site

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Visitor Hanford Computer Access Request Visitor Hanford Computer Access Request Visitor Hanford Computer Access Request Visitor Hanford Computer Access Request Email Email Page | Print Print Page | Text Increase Font Size Decrease Font Size The U.S. Department of Energy (DOE), Richland Operations Office (RL), in compliance with the 'Tri-Party Agreement Databases, Access Mechanism and Procedures' document, DOE/RL-93-69, Revision 5; set forth the requirements for access to the Hanford Site

  20. The Adversarial Route Analysis Tool: A Web Application

    SciTech Connect (OSTI)

    Casson, William H. Jr.

    2012-08-02

    The Adversarial Route Analysis Tool is a type of Google maps for adversaries. It's a web-based Geospatial application similar to Google Maps. It helps the U.S. government plan operations that predict where an adversary might be. It's easily accessible and maintainble and it's simple to use without much training.

  1. U-205: RSA Access Manager Session Replay Flaw Lets Remote Users Access the System

    Broader source: Energy.gov [DOE]

    A vulnerability was reported in RSA Access Manager. A remote user can gain access to the target system.

  2. D&D and Risk Assessment Tools | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    and Risk Assessment Tools D&D and Risk Assessment Tools ORISE and PNNL both developed tools to assist in the risk assessment and planning of D&D activities. PNNL developed a Risk D&D tool, a rapid prototype computer based model, to evaluate alternatives in the sequencing of D&D work. D&D and Risk Assessment Tools (377.44 KB) More Documents & Publications An Automated JHA Tool, Making Safety Accessible Voluntary Protection Program Onsite Review, Oak Ridge Associated

  3. Access Venture Partners | Open Energy Information

    Open Energy Info (EERE)

    Venture Partners Jump to: navigation, search Logo: Access Venture Partners Name: Access Venture Partners Address: 8787 Turnpike Drive, Suite 260 Place: Westminster, Colorado Zip:...

  4. International Electricity Trade - Open Access | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    to provide non-discriminatory open access transmission services. This open access requirement would also be attached to the permit holder's authorization(s) to export electricity. ...

  5. Argonne Site Access | Advanced Photon Source

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Getting Started Users Home Introduction to APS New User Checklist Argonne Site Access My APS Portal My APS Portal Argonne Site Access Argonne National Laboratory is a...

  6. Testing Web Application Accessibility | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Testing Web Application Accessibility Testing Web Application Accessibility Section 508 requires all federal agencies to make their electronic and information technologies ...

  7. Establishing a Secure Data Center with Remote Access: Preprint

    SciTech Connect (OSTI)

    Gonder, J.; Burton, E.; Murakami, E.

    2012-04-01

    Access to existing travel data is critical for many analysis efforts that lack the time or resources to support detailed data collection. High-resolution data sets provide particular value, but also present a challenge for preserving the anonymity of the original survey participants. To address this dilemma of providing data access while preserving privacy, the National Renewable Energy Laboratory and the U.S. Department of Transportation have launched the Transportation Secure Data Center (TSDC). TSDC data sets include those from regional travel surveys and studies that increasingly use global positioning system devices. Data provided by different collecting agencies varies with respect to formatting, elements included and level of processing conducted in support of the original purpose. The TSDC relies on a number of geospatial and other analysis tools to ensure data quality and to generate useful information outputs. TSDC users can access the processed data in two different ways. The first is by downloading summary results and second-by-second vehicle speed profiles (with latitude/longitude information removed) from a publicly-accessible website. The second method involves applying for a remote connection account to a controlled-access environment where spatial analysis can be conducted, but raw data cannot be removed.

  8. Manipulative Virtual Tools for Tool Mark Characterization | The...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Manipulative Virtual Tools for Tool Mark Characterization FWPProject Description: The goal of this project is to develop a methodology whereby a three-dimensional (3-D) computer...

  9. Manipulative Virtual Tools for Tool Mark Characterization | The...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Manipulative Virtual Tools for Tool Mark Characterization DESCRIPTION: The goal of this project is to develop a methodology whereby a three-dimensional (3-D) computer simulation of...

  10. Clean Cities Tools: Tools to Help You Save Money, Use Less Petroleum, and Reduce Emissions (Brochure), Clean Cities, Energy Efficiency & Renewable Energy (EERE)

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    offers a large collection of helpful Web-based tools. These calculators, interactive maps, and data searches can assist fleets, fuel providers, and other transportation decision makers in their efforts to reduce petroleum use. Find the Clean Cities coalition in your area, and get the contact information for your Clean Cities coordinator at eere.energy.gov/cleancities/coalitions.html. Clean Cities Tools Tools to help you save money, use less petroleum, and reduce emissions Access Clean Cities

  11. Get Access to Work Onsite

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Get Access to Work Onsite Get Access to Work Onsite Print Monday, 31 August 2009 09:48 The following process MUST be completed online by new and returning users at least TWO WEEKS prior to arrival at the ALS. Not a U.S. citizen? Please look at Documents for Foreign Nationals well ahead of your visit. Bring all relevant documents to the ALS in order to complete your registration. NOTE: Users who are citizens of, or were born in, T4 countries (Cuba, Iran, Sudan, and Syria) need DOE permission to

  12. mirabootcamp-tools-2014.pptx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    BGQ Performance Tools Sco P arker Mira P erformance B oot C amp: M ay 2 1, 2 014 Argonne L eadership C ompuBng F acility Mira Tools Status Tool N ame Source Provides Q S tatus...

  13. RSP Tooling Technology

    SciTech Connect (OSTI)

    2001-11-20

    RSP Tooling{trademark} is a spray forming technology tailored for producing molds and dies. The approach combines rapid solidification processing and net-shape materials processing in a single step. The general concept involves converting a mold design described by a CAD file to a tooling master using a suitable rapid prototyping (RP) technology such as stereolithography. A pattern transfer is made to a castable ceramic, typically alumina or fused silica (Figure 1). This is followed by spray forming a thick deposit of a tooling alloy on the pattern to capture the desired shape, surface texture, and detail. The resultant metal block is cooled to room temperature and separated from the pattern. The deposit's exterior walls are machined square, allowing it to be used as an insert in a standard mold base. The overall turnaround time for tooling is about 3 to 5 days, starting with a master. Molds and dies produced in this way have been used in high volume production runs in plastic injection molding and die casting. A Cooperative Research and Development Agreement (CRADA) between the Idaho National Engineering and Environmental Laboratory (INEEL) and Grupo Vitro has been established to evaluate the feasibility of using RSP Tooling technology for producing molds and dies of interest to Vitro. This report summarizes results from Phase I of this agreement, and describes work scope and budget for Phase I1 activities. The main objective in Phase I was to demonstrate the feasibility of applying the Rapid Solidification Process (RSP) Tooling method to produce molds for the manufacture of glass and other components of interest to Vitro. This objective was successfully achieved.

  14. Grid Client Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Client Tools Grid Client Tools Using OSG and Globus client software You can either run the OSG/Globus client software directly on the NERSC systems via "modules" or by downloading it to your workstation. On your workstation: Download and install the OSG client software. Then run the following to setup your environment: % . $INSTALL_DIR/setup.sh or % source $INSTALL_DIR/setup.csh On NERSC Compute Systems: Use the module command to load the OSG or Globus toolkit. Where possible, you

  15. PCard Data Analysis Tool

    Energy Science and Technology Software Center (OSTI)

    2005-04-01

    The Procurement Card data analysis and monitoring tool enables due-diligence review using predefined user-created queries and reports. The system tracks individual compliance emails. More specifically, the tool: - Helps identify exceptions or questionable and non-compliant purchases, - Creates audit random sample on request, - Allows users to create and run new or ad-hoc queries and reports, - Monitors disputed charges, - Creates predefined Emails to Cardholders requesting documentation and/or clarification, - Tracks audit status, notes,more » Email status (date sent, response), audit resolution.« less

  16. PCard Data Analysis Tool

    SciTech Connect (OSTI)

    Hilts, Jim

    2005-04-01

    The Procurement Card data analysis and monitoring tool enables due-diligence review using predefined user-created queries and reports. The system tracks individual compliance emails. More specifically, the tool: - Helps identify exceptions or questionable and non-compliant purchases, - Creates audit random sample on request, - Allows users to create and run new or ad-hoc queries and reports, - Monitors disputed charges, - Creates predefined Emails to Cardholders requesting documentation and/or clarification, - Tracks audit status, notes, Email status (date sent, response), audit resolution.

  17. Drum lid removal tool

    DOE Patents [OSTI]

    Pella, Bernard M.; Smith, Philip D.

    2010-08-24

    A tool for removing the lid of a metal drum wherein the lid is clamped over the drum rim without protruding edges, the tool having an elongated handle with a blade carried by an angularly positioned holder affixed to the midsection of the handle, the blade being of selected width to slice between lid lip and the drum rim and, when the blade is so positioned, upward motion of the blade handle will cause the blade to pry the lip from the rim and allow the lid to be removed.

  18. Retrofit Financial Analysis Tool

    Office of Energy Efficiency and Renewable Energy (EERE)

    The Street and Parking Facility Lighting Retrofit Financial Analysis Tool was developed by a partnership of the DOE Municipal Solid-State Street Lighting Consortium, the Clinton Climate Initiative (CCI)/C40, and the Federal Energy Management Program (FEMP), for the financial analysis of retrofitting street and parking facility lighting with more efficient alternatives. Property owners, city and other government agencies, utilities, and energy efficiency organizations can use this tool to compute annualized energy and energy-cost savings, maintenance savings, greenhouse gas reductions, net present value, and simple payback associated with potential lighting upgrades.

  19. The GNEMRE Dendro Tool.

    SciTech Connect (OSTI)

    Merchant, Bion John

    2007-10-01

    The GNEMRE Dendro Tool provides a previously unrealized analysis capability in the field of nuclear explosion monitoring. Dendro Tool allows analysts to quickly and easily determine the similarity between seismic events using the waveform time-series for each of the events to compute cross-correlation values. Events can then be categorized into clusters of similar events. This analysis technique can be used to characterize historical archives of seismic events in order to determine many of the unique sources that are present. In addition, the source of any new events can be quickly identified simply by comparing the new event to the historical set.

  20. Log-Tool

    SciTech Connect (OSTI)

    Goodall, John

    2012-05-21

    Log files are typically semi- or un-structured. To be useable for visualization and machine learning, they need to be parsed into a standard, structured format. Log-tool is a tool for facilitating the parsing, structuring, and routing of log files (e.g. intrusion detection long, web server logs, system logs). It consists of three main components: (1) Input – it will input data from files, standard input, and syslog, (2) Parser – it will parse the log file based on regular expressions into structured data (JSNO format), (3) Output – it will output structured data into commonly used formats, including Redis (a database), standard output, and syslog.

  1. Software and Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Tools Software and Tools Chos Chos is used to select your operating system at PDSF. Read More » Modules Module is a system which you can use to specify what software you want to use... Read More » Project Accounts You can use a shared project account to facilitate collaboration... Read More » Checking Quotas To check your quotas use the myquota command... Read More » Accelerating Remote X Performance You can use NX to greatly improve the performance of X window applications. Read More »

  2. Intel_tools.pptx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ! Cray QBR, Apr 8, 2015 Intel Tools for optimizations HBM tools are available on Edison * The memkind library is a user extensible heap manager. It can be used to test/simulate the benefit of high hand width memory (HBM or HBW) on the dual socket Edison compute nodes today. - Use the QPI bus to simulate slow memory - This is not an accurate model of the bandwidth and latency characteristics of the KNL on package memory, but is a reasonable way to determine which data structures rely critically

  3. NBP_RFI_Data_Access.PDF | Department of Energy

    Office of Environmental Management (EM)

    NBPRFIDataAccess.PDF NBPRFIDataAccess.PDF (104.55 KB) More Documents & Publications NBPRFICommunicationsRequirements.PDF NBP RFI: Data Access RE: NBP RFI: Data Access

  4. CLEAP_Tools_DRAFT_nameupdate

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Zoning Check Climate Explorer Smart Location Database Coastal Resilience Mapping Tool ... Cost of renewable energy spreadsheet tool JEDI Open PV Database OpenEI Datasets BEDES ...

  5. Expanding Solar Access to Nonprofits

    Broader source: Energy.gov [DOE]

    The Solar Foundation is leading a team that developed the CivicPACE program through an award from the SunShot Initiative. CivicPACE addresses the underwriting and access challenges of solar financing for tax-exempt organizations, such as churches, nonprofit affordable housing, community clinics, and education institutions.

  6. LANSCE personnel access control system

    SciTech Connect (OSTI)

    Sturrock, J.C.; Gallegos, F.R.; Hall, M.J.

    1997-01-01

    The Radiation Security System (RSS) at the Los Alamos Neutron Science Center (LANSCE) provides personnel protection from prompt radiation due to accelerated beam. The Personnel Access Control System (PACS) is a component of the RSS that is designed to prevent personnel access to areas where prompt radiation is a hazard. PACS was designed to replace several older personnel safety systems (PSS) with a single modem unified design. Lessons learned from the operation over the last 20 years were incorporated into a redundant sensor, single-point failure safe, fault tolerant, and tamper-resistant system that prevents access to the beam areas by controlling the access keys and beam stoppers. PACS uses a layered philosophy to the physical and electronic design. The most critical assemblies are battery backed up, relay logic circuits; less critical devices use Programmable Logic Controllers (PLCs) for timing functions and communications. Outside reviewers have reviewed the operational safety of the design. The design philosophy, lessons learned, hardware design, software design, operation, and limitations of the device are described.

  7. Clean Cities Tools

    SciTech Connect (OSTI)

    2014-12-19

    The U.S. Department of Energy's Clean Cities offers a large collection of Web-based tools on the Alternative Fuels Data Center. These calculators, interactive maps, and data searches can assist fleets, fuels providers, and other transportation decision makers in their efforts to reduce petroleum use.

  8. Energy Footprint Tool

    Office of Energy Efficiency and Renewable Energy (EERE)

    Developed by the U.S. Department of Energy, the Energy Footprint Tool can help manufacturing, commercial and institutional facilities to track their energy consumption, factors related to energy use, and significant energy end-use. This is collectively referred to as the facility’s energy footprint.

  9. Electrically powered hand tool

    DOE Patents [OSTI]

    Myers, Kurt S.; Reed, Teddy R.

    2007-01-16

    An electrically powered hand tool is described and which includes a three phase electrical motor having a plurality of poles; an electrical motor drive electrically coupled with the three phase electrical motor; and a source of electrical power which is converted to greater than about 208 volts three-phase and which is electrically coupled with the electrical motor drive.

  10. Frequency Response Tool

    Energy Science and Technology Software Center (OSTI)

    2014-03-13

    According to the North American Electric Reliability Corporation (NERC) definition: “Frequency response is a measure of an Interconnection’s ability to stabilize frequency immediately following the sudden loss of generation or load, and is a critical component of the reliable operation of the Bulk-Power System, particularly during disturbances and recoveries. Failure to maintain frequency can disrupt the operation of equipment and initiate disconnection of power plant equipment to prevent it from being damaged, which could leadmore » to wide-spread blackouts.” Frequency Response Tool automates the power system frequency response analysis process. The tool performs initial estimation of the system frequency parameters (initial frequency, minimum frequency, settling point). User can visually inspect and adjust these parameters. The tool also calculates the frequency response performance metrics of the system, archives the historic events and baselines the system performance. Frequency response performance characteristics of the system are calculated using phasor measurement unit (PMU) information. Methodology of the frequency response performance assessment implemented in the tool complies with the NERC Frequency response standard.« less

  11. Smart tool holder

    DOE Patents [OSTI]

    Day, R.D.; Foreman, L.R.; Hatch, D.J.; Meadows, M.S.

    1998-09-08

    There is provided an apparatus for machining surfaces to accuracies within the nanometer range by use of electrical current flow through the contact of the cutting tool with the workpiece as a feedback signal to control depth of cut. 3 figs.

  12. MULTIPLE SHAFT TOOL HEAD

    DOE Patents [OSTI]

    Colbert, H.P.

    1962-10-23

    An improved tool head arrangement is designed for the automatic expanding of a plurality of ferruled tubes simultaneously. A plurality of output shafts of a multiple spindle drill head are driven in unison by a hydraulic motor. A plurality of tube expanders are respectively coupled to the shafts through individual power train arrangements. The axial or thrust force required for the rolling operation is provided by a double acting hydraulic cylinder having a hollow through shaft with the shaft cooperating with an internally rotatable splined shaft slidably coupled to a coupling rigidly attached to the respectlve output shaft of the drill head, thereby transmitting rotary motion and axial thrust simultaneously to the tube expander. A hydraulic power unit supplies power to each of the double acting cylinders through respective two-position, four-way valves, under control of respective solenoids for each of the cylinders. The solenoids are in turn selectively controlled by a tool selection control unit which in turn is controlled by signals received from a programmed, coded tape from a tape reader. The number of expanders that are extended in a rolling operation, which may be up to 42 expanders, is determined by a predetermined program of operations depending upon the arrangement of the ferruled tubes to be expanded in the tube bundle. The tape reader also supplies dimensional information to a machine tool servo control unit for imparting selected, horizontal and/or vertical movement to the tool head assembly. (AEC)

  13. Chizu Task Mapping Tool

    Energy Science and Technology Software Center (OSTI)

    2014-07-01

    Chizu is a tool for Mapping MPI processes or tasks to physical processors or nodes for optimizing communication performance. It takes the communication graph of a High Performance Computing (HPC) application and the interconnection topology of a supercomputer as input. It outputs a new MPI rand to processor mapping, which can be used when launching the HPC application.

  14. A framework for geometric reasoning about tools in assembly

    SciTech Connect (OSTI)

    Wilson, R.H.

    1995-12-31

    When assembling a product, humans, robots, and other automation employ a variety of tools to manipulate, attach, and test parts and subassemblies. This paper proposes a framework lo represent and reason about geometric accessibility constraints for a wide variety of assembly tools. Central to the framework is a use volume encoding a minimum space that must be free in an assembly state to apply a given tool, and placement constraints on where that volume must be placed relative to the parts on which the tool acts. Determining whether a tool can be applied in a given assembly state is an instance of the FINDPLACE problem. In addition, we present more efficient methods lo integrate the framework into assembly planning. For tools that are applied either before or after their target parts are mated, one method preprocesses a single tool application for all possible states of assembly of a product. For tools applied after their target parts are mated, a complementary method guarantees polynomial-time assembly planning. We describe experiments with an initial implementation of the framework and a library of seven tools.

  15. Chapter_12_Special_Access_Programs

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    2 Special Access Programs This chapter describes the DOE Special Access Program (SAP) at DOE HQ and implements the requirements of: * Executive Order 13526, Classified National Security Information, Section 4.3, Special Access Programs, and Section 5.4, General Responsibilities, subparagraph (d). * DOE Order 471.5, Special Access Programs. A SAP is a program established for a specific class of classified information that imposes safeguarding and access requirements exceeding those normally

  16. Remote Access Options | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Remote Access Options Remote Access Options A Virtual Private Network (VPN) is a private connection between two resources that uses the public telecommunication infrastructure. It maintains privacy through the use of a tunneling protocol and security procedures and provides the following abilities. * Messaging via Outlook Web Access (OWA) * Remote desktop and application access via VDI and Citrix(tm) Workplace * Secure access to DOE Headquarters mission-specific internal network resources

  17. EERE Success Story-Data Access and Analytics Improve Solar Valuation |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Data Access and Analytics Improve Solar Valuation EERE Success Story-Data Access and Analytics Improve Solar Valuation April 18, 2016 - 1:09pm Addthis KWh Analytics employees discuss their solar portfolio management platform, HelioStats. KWh Analytics employees discuss their solar portfolio management platform, HelioStats. As the solar energy industry expands, banks and investors increasingly require higher quality data and tools to quantify the risks associated with

  18. Pneumatic soil removal tool

    DOE Patents [OSTI]

    Neuhaus, J.E.

    1992-10-13

    A soil removal tool is provided for removing radioactive soil, rock and other debris from the bottom of an excavation, while permitting the operator to be located outside of a containment for that excavation. The tool includes a fixed jaw, secured to one end of an elongate pipe, which cooperates with a movable jaw pivotably mounted on the pipe. Movement of the movable jaw is controlled by a pneumatic cylinder mounted on the pipe. The actuator rod of the pneumatic cylinder is connected to a collar which is slidably mounted on the pipe and forms part of the pivotable mounting assembly for the movable jaw. Air is supplied to the pneumatic cylinder through a handle connected to the pipe, under the control of an actuator valve mounted on the handle, to provide movement of the movable jaw. 3 figs.

  19. Pneumatic soil removal tool

    DOE Patents [OSTI]

    Neuhaus, John E.

    1992-01-01

    A soil removal tool is provided for removing radioactive soil, rock and other debris from the bottom of an excavation, while permitting the operator to be located outside of a containment for that excavation. The tool includes a fixed jaw, secured to one end of an elongate pipe, which cooperates with a movable jaw pivotably mounted on the pipe. Movement of the movable jaw is controlled by a pneumatic cylinder mounted on the pipe. The actuator rod of the pneumatic cylinder is connected to a collar which is slidably mounted on the pipe and forms part of the pivotable mounting assembly for the movable jaw. Air is supplied to the pneumatic cylinder through a handle connected to the pipe, under the control of an actuator valve mounted on the handle, to provide movement of the movable jaw.

  20. Load Model Data Tool

    SciTech Connect (OSTI)

    David Chassin, Pavel Etingov

    2013-04-30

    The LMDT software automates the process of the load composite model data preparation in the format supported by the major power system software vendors (GE and Siemens). Proper representation of the load composite model in power system dynamic analysis is very important. Software tools for power system simulation like GE PSLF and Siemens PSSE already include algorithms for the load composite modeling. However, these tools require that the input information on composite load to be provided in custom formats. Preparation of this data is time consuming and requires multiple manual operations. The LMDT software enables to automate this process. Software is designed to generate composite load model data. It uses the default load composition data, motor information, and bus information as an input. Software processes the input information and produces load composition model. Generated model can be stored in .dyd format supported by GE PSLF package or .dyr format supported by Siemens PSSE package.

  1. Fluid blade disablement tool

    DOE Patents [OSTI]

    Jakaboski, Juan-Carlos; Hughs, Chance G.; Todd, Steven N.

    2012-01-10

    A fluid blade disablement (FBD) tool that forms both a focused fluid projectile that resembles a blade, which can provide precision penetration of a barrier wall, and a broad fluid projectile that functions substantially like a hammer, which can produce general disruption of structures behind the barrier wall. Embodiments of the FBD tool comprise a container capable of holding fluid, an explosive assembly which is positioned within the container and which comprises an explosive holder and explosive, and a means for detonating. The container has a concavity on the side adjacent to the exposed surface of the explosive. The position of the concavity relative to the explosive and its construction of materials with thicknesses that facilitate inversion and/or rupture of the concavity wall enable the formation of a sharp and coherent blade of fluid advancing ahead of the detonation gases.

  2. Algal functional annotation tool

    SciTech Connect (OSTI)

    Lopez, D.; Casero, D.; Cokus, S. J.; Merchant, S. S.; Pellegrini, M.

    2012-07-01

    The Algal Functional Annotation Tool is a web-based comprehensive analysis suite integrating annotation data from several pathway, ontology, and protein family databases. The current version provides annotation for the model alga Chlamydomonas reinhardtii, and in the future will include additional genomes. The site allows users to interpret large gene lists by identifying associated functional terms, and their enrichment. Additionally, expression data for several experimental conditions were compiled and analyzed to provide an expression-based enrichment search. A tool to search for functionally-related genes based on gene expression across these conditions is also provided. Other features include dynamic visualization of genes on KEGG pathway maps and batch gene identifier conversion.

  3. Stack Trace Analysis Tool

    Energy Science and Technology Software Center (OSTI)

    2013-02-19

    STAT is a light weight debugging tool that gathers and merges stack traces from all of the processes in a parallell application. STAT uses the MRNet tree based overlay network to broadcast commands from the tool front-end to the STAT daemons and for the front-end to gather the traces from the STAT daemons. As the traces propagate through the MRNet network tree, they are merged across all tasks to from a single call prefix tree.more » The call prefix tree can be examined to identify tasks with similar function call patterns and to delineate a small set of equivalence slasses. A representative task from each of these classes can then be fed into a full feature debugger like TotalView for root cause analysis.« less

  4. Log-Tool

    Energy Science and Technology Software Center (OSTI)

    2012-05-21

    Log files are typically semi- or un-structured. To be useable for visualization and machine learning, they need to be parsed into a standard, structured format. Log-tool is a tool for facilitating the parsing, structuring, and routing of log files (e.g. intrusion detection long, web server logs, system logs). It consists of three main components: (1) Input – it will input data from files, standard input, and syslog, (2) Parser – it will parse the logmore » file based on regular expressions into structured data (JSNO format), (3) Output – it will output structured data into commonly used formats, including Redis (a database), standard output, and syslog.« less

  5. Software and Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Software and Tools Software and Tools The table below shows the software installed on Edison that is managed by modules. Package Category Version Module Install Date Date Made Default / 1.0.1 cray-cti/1.0.1 2016-07-21 2016-07-21 / 16.07 cdt/16.07 2016-07-21 A Fortran interface to the GNU Scientific Library (GSL) libraries/ math 1.0.0 fgsl/1.0.0 2015-04-14 2016-08-31 ABINIT applications/ material sciences 7.0.5 abinit/7.0.5 2013-03-12 2013-03-12 ABINIT applications/ material sciences 7.10.2

  6. Load Model Data Tool

    Energy Science and Technology Software Center (OSTI)

    2013-04-30

    The LMDT software automates the process of the load composite model data preparation in the format supported by the major power system software vendors (GE and Siemens). Proper representation of the load composite model in power system dynamic analysis is very important. Software tools for power system simulation like GE PSLF and Siemens PSSE already include algorithms for the load composite modeling. However, these tools require that the input information on composite load to bemore » provided in custom formats. Preparation of this data is time consuming and requires multiple manual operations. The LMDT software enables to automate this process. Software is designed to generate composite load model data. It uses the default load composition data, motor information, and bus information as an input. Software processes the input information and produces load composition model. Generated model can be stored in .dyd format supported by GE PSLF package or .dyr format supported by Siemens PSSE package.« less

  7. List of Programming Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Programming Tools List List of Programming Tools Package Platform Version Module Install Date Date Made Default 7zip genepool 9.20.1 7zip/9.20.1 2013-01-14 2013-01-14 7zip phoebe 9.20.1 7zip/9.20.1 2013-01-14 2013-06-26 ABINIT cori 7.10.4 abinit/7.10.4 2015-09-24 2015-09-24 ABINIT cori 8.0.8 abinit/8.0.8 2016-06-30 2016-06-30 ABINIT edison 7.0.5 abinit/7.0.5 2013-03-12 2013-03-12 ABINIT edison 7.10.2 abinit/7.10.2 2015-01-27 ABINIT edison 7.10.4 abinit/7.10.4 2015-07-31 ABINIT edison 7.4.2

  8. Stack Trace Analysis Tool

    Energy Science and Technology Software Center (OSTI)

    2008-01-16

    STAT is a light weight debugging tool that gathers and merges stack traces from all of the processes in a parallel application. STAT uses the MRNet free based overlay network to broadcast commands from the tool front-end to the STAT daemons and for the front-end to gather the traces from the STAT daemons. As the traces propagate through the MRNet network tree, they are merged across all tasks to form a single call prefix tree.more » The call prefix tree can be examined to identify tasks with similar function call patterns and to delineate a small set of equivalence classes. A representative task from each of these classes can then be fed into a full feature debugger like TotalView for root cause analysis.« less

  9. NREL: Technology Deployment - Tool Development

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Tool Development Use NREL's models and tools to prioritize opportunities and analyze the energy savings and economics of energy efficiency, advanced transportation, and renewable energy projects. NREL develops geographic tools, interactive calculators, market and metrics databases, and mobile applications to help inform sustainable energy projects and prepare the market for emerging technologies. Geographic Tools Drawing from rich datasets, NREL builds tools that deliver interactive mapping

  10. Rotor Design Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Design Tools - Sandia Energy Energy Search Icon Sandia Home Locations Contact Us Employee Locator Energy & Climate Secure & Sustainable Energy Future Stationary Power Energy Conversion Efficiency Solar Energy Wind Energy Water Power Supercritical CO2 Geothermal Natural Gas Safety, Security & Resilience of the Energy Infrastructure Energy Storage Nuclear Power & Engineering Grid Modernization Battery Testing Nuclear Energy Defense Waste Management Programs Advanced Nuclear Energy

  11. Java Vertexing Tools

    SciTech Connect (OSTI)

    Strube, Jan; Graf, Norman; /SLAC

    2006-03-03

    This document describes the implementation of the topological vertex finding algorithm ZVTOP within the org.lcsim reconstruction and analysis framework. At the present date, Java vertexing tools allow users to perform topological vertexing on tracks that have been obtained from a Fast MC simulation. An implementation that will be able to handle fully reconstructed events is being designed from the ground up for longevity and maintainability.

  12. Channel nut tool

    DOE Patents [OSTI]

    Olson, Marvin

    2016-01-12

    A method, system, and apparatus for installing channel nuts includes a shank, a handle formed on a first end of a shank, and an end piece with a threaded shaft configured to receive a channel nut formed on the second end of the shaft. The tool can be used to insert or remove a channel nut in a channel framing system and then removed from the channel nut.

  13. Environmental Compliance Assistance Tool

    Energy Science and Technology Software Center (OSTI)

    1999-04-16

    ENVIROCAT is a database/knowledge base software system designed to assist in environment, safety and health (ES&H) regulatory compliance assessments of manufacturing processes. Materials and processes are mapped to ES&H regulations. The regulations database identifies materials'' quantities and limits of compliance. Materials are identified per descriptive name or CAS number. ENVIROCAT has an interactive user/tool capability such that a question and answer session on materials and processes is custom tailored to a particular manufacturing site.

  14. Sierra Nevada Tools

    Energy Science and Technology Software Center (OSTI)

    2004-01-01

    SNTools is a general framework for managing, through the use of policies, development tools used to create software. To date, most implementations written under the framework focus on managing revision control, building and testing. The Sierra implementation of the SNTools is used in the development and installation of the SIERRA Framework and its applications, SNTools is used as a method of managing or codifying software quality engineering practices.

  15. Software and Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Franklin Queues and Policies File storage and I/O Software and Tools Debugging and profiling Cray XT Documentation Franklin is Being Retired Bassi Storage & File Systems Application Performance Data & Analytics Job Logs & Statistics Training & Tutorials Software Policies User Surveys NERSC Users Group Help Staff Blogs Request Repository Mailing List Need Help? Out-of-hours Status and Password help Call operations: 1-800-66-NERSC, option 1 or 510-486-6821 Account Support

  16. Software and Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    File Storage and I/O Software and Tools Debugging and profiling Performance and Optimization Cray XE Documentation Cluster Compatibility Mode Hopper, Cray XE6 Carver Jesup Dirac Edison Phase I Euclid - Retired 01/31/2013 Franklin - Retired 04/30/12 Bassi Storage & File Systems Application Performance Data & Analytics Job Logs & Statistics Training & Tutorials Software Policies User Surveys NERSC Users Group Help Staff Blogs Request Repository Mailing List Need Help? Out-of-hours

  17. Fluid sampling tool

    DOE Patents [OSTI]

    Garcia, A.R.; Johnston, R.G.; Martinez, R.K.

    1999-05-25

    A fluid sampling tool is described for sampling fluid from a container. The tool has a fluid collecting portion which is drilled into the container wall, thereby affixing it to the wall. The tool may have a fluid extracting section which withdraws fluid collected by the fluid collecting section. The fluid collecting section has a fluted shank with an end configured to drill a hole into a container wall. The shank has a threaded portion for tapping the borehole. The shank is threadably engaged to a cylindrical housing having an inner axial passageway sealed at one end by a septum. A flexible member having a cylindrical portion and a bulbous portion is provided. The housing can be slid into an inner axial passageway in the cylindrical portion and sealed to the flexible member. The bulbous portion has an outer lip defining an opening. The housing is clamped into the chuck of a drill, the lip of the bulbous section is pressed against a container wall until the shank touches the wall, and the user operates the drill. Wall shavings (kerf) are confined in a chamber formed in the bulbous section as it folds when the shank advances inside the container. After sufficient advancement of the shank, an o-ring makes a seal with the container wall. 6 figs.

  18. Frequency Response Analysis Tool

    SciTech Connect (OSTI)

    Etingov, Pavel V.; Kosterev, Dmitry; Dai, T.

    2014-12-31

    Frequency response has received a lot of attention in recent years at the national level, which culminated in the development and approval of North American Electricity Reliability Corporation (NERC) BAL-003-1 Frequency Response and Frequency Bias Setting Reliability Standard. This report is prepared to describe the details of the work conducted by Pacific Northwest National Laboratory (PNNL) in collaboration with the Bonneville Power Administration and Western Electricity Coordinating Council (WECC) Joint Synchronized Information Subcommittee (JSIS) to develop a frequency response analysis tool (FRAT). The document provides the details on the methodology and main features of the FRAT. The tool manages the database of under-frequency events and calculates the frequency response baseline. Frequency response calculations are consistent with frequency response measure (FRM) in NERC BAL-003-1 for an interconnection and balancing authority. The FRAT can use both phasor measurement unit (PMU) data, where available, and supervisory control and data acquisition (SCADA) data. The tool is also capable of automatically generating NERC Frequency Response Survey (FRS) forms required by BAL-003-1 Standard.

  19. Fluid sampling tool

    DOE Patents [OSTI]

    Garcia, Anthony R.; Johnston, Roger G.; Martinez, Ronald K.

    1999-05-25

    A fluid sampling tool for sampling fluid from a container. The tool has a fluid collecting portion which is drilled into the container wall, thereby affixing it to the wall. The tool may have a fluid extracting section which withdraws fluid collected by the fluid collecting section. The fluid collecting section has a fluted shank with an end configured to drill a hole into a container wall. The shank has a threaded portion for tapping the borehole. The shank is threadably engaged to a cylindrical housing having an inner axial passageway sealed at one end by a septum. A flexible member having a cylindrical portion and a bulbous portion is provided. The housing can be slid into an inner axial passageway in the cylindrical portion and sealed to the flexible member. The bulbous portion has an outer lip defining an opening. The housing is clamped into the chuck of a drill, the lip of the bulbous section is pressed against a container wall until the shank touches the wall, and the user operates the drill. Wall shavings (kerf) are confined in a chamber formed in the bulbous section as it folds when the shank advances inside the container. After sufficient advancement of the shank, an o-ring makes a seal with the container wall.

  20. Data Tools & Models - U.S. Energy Information Administration (EIA)

    U.S. Energy Information Administration (EIA) Indexed Site

    Data Tools & Models Glossary › FAQS › Overview Data Tools Time Series Models & Documentation EIA has a vast amount of data, reports, forecasts, analytical content, and documentation to assist researchers working on energy topics. For users eager to dive deeper into our content, we have assembled tools to customize searches, view specific data sets, study detailed documentation, and access time-series data. Application Programming Interface (API): The API allows computers to more

  1. Decision Support Tool: Integrated REDD+ accounting frameworks...

    Open Energy Info (EERE)

    Decision Support Tool: Integrated REDD+ accounting frameworks: Nested national approaches Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Decision Support Tool:...

  2. Renewable Energy Financial Instruments Guidance Tool (REFINe...

    Open Energy Info (EERE)

    Guidance Tool (REFINe) Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Renewable Energy Financial Instruments Guidance Tool (REFINe) Focus Area: Renewable Energy...

  3. Energy Storage Computational Tool | Open Energy Information

    Open Energy Info (EERE)

    Energy Storage Computational Tool Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Energy Storage Computational Tool AgencyCompany Organization: Navigant Consulting...

  4. LEDSGP/tools | Open Energy Information

    Open Energy Info (EERE)

    Data & Tools Publications Training Knowledge Portals LEDS Benefits Back to top Peer-Learning Tools LEDS Activity and Tool Inventory Our LEDS Activity and Tool Inventory provides...

  5. Algal functional annotation tool

    SciTech Connect (OSTI)

    2012-07-12

    Abstract BACKGROUND: Progress in genome sequencing is proceeding at an exponential pace, and several new algal genomes are becoming available every year. One of the challenges facing the community is the association of protein sequences encoded in the genomes with biological function. While most genome assembly projects generate annotations for predicted protein sequences, they are usually limited and integrate functional terms from a limited number of databases. Another challenge is the use of annotations to interpret large lists of 'interesting' genes generated by genome-scale datasets. Previously, these gene lists had to be analyzed across several independent biological databases, often on a gene-by-gene basis. In contrast, several annotation databases, such as DAVID, integrate data from multiple functional databases and reveal underlying biological themes of large gene lists. While several such databases have been constructed for animals, none is currently available for the study of algae. Due to renewed interest in algae as potential sources of biofuels and the emergence of multiple algal genome sequences, a significant need has arisen for such a database to process the growing compendiums of algal genomic data. DESCRIPTION: The Algal Functional Annotation Tool is a web-based comprehensive analysis suite integrating annotation data from several pathway, ontology, and protein family databases. The current version provides annotation for the model alga Chlamydomonas reinhardtii, and in the future will include additional genomes. The site allows users to interpret large gene lists by identifying associated functional terms, and their enrichment. Additionally, expression data for several experimental conditions were compiled and analyzed to provide an expression-based enrichment search. A tool to search for functionally-related genes based on gene expression across these conditions is also provided. Other features include dynamic visualization of genes on KEGG

  6. Algal functional annotation tool

    Energy Science and Technology Software Center (OSTI)

    2012-07-12

    Abstract BACKGROUND: Progress in genome sequencing is proceeding at an exponential pace, and several new algal genomes are becoming available every year. One of the challenges facing the community is the association of protein sequences encoded in the genomes with biological function. While most genome assembly projects generate annotations for predicted protein sequences, they are usually limited and integrate functional terms from a limited number of databases. Another challenge is the use of annotations tomore » interpret large lists of 'interesting' genes generated by genome-scale datasets. Previously, these gene lists had to be analyzed across several independent biological databases, often on a gene-by-gene basis. In contrast, several annotation databases, such as DAVID, integrate data from multiple functional databases and reveal underlying biological themes of large gene lists. While several such databases have been constructed for animals, none is currently available for the study of algae. Due to renewed interest in algae as potential sources of biofuels and the emergence of multiple algal genome sequences, a significant need has arisen for such a database to process the growing compendiums of algal genomic data. DESCRIPTION: The Algal Functional Annotation Tool is a web-based comprehensive analysis suite integrating annotation data from several pathway, ontology, and protein family databases. The current version provides annotation for the model alga Chlamydomonas reinhardtii, and in the future will include additional genomes. The site allows users to interpret large gene lists by identifying associated functional terms, and their enrichment. Additionally, expression data for several experimental conditions were compiled and analyzed to provide an expression-based enrichment search. A tool to search for functionally-related genes based on gene expression across these conditions is also provided. Other features include dynamic visualization of genes on

  7. Accessing defect dynamics using intense, nanosecond pulsed ion beams

    SciTech Connect (OSTI)

    Persaud, A.; Barnard, J. J.; Guo, H.; Hosemann, P.; Lidia, S.; Minor, A. M.; Seidl, P. A.; Schenkel, T.

    2015-06-18

    Gaining in-situ access to relaxation dynamics of radiation induced defects will lead to a better understanding of materials and is important for the verification of theoretical models and simulations. We show preliminary results from experiments at the new Neutralized Drift Compression Experiment (NDCX-II) at Lawrence Berkeley National Laboratory that will enable in-situ access to defect dynamics through pump-probe experiments. Here, the unique capabilities of the NDCX-II accelerator to generate intense, nanosecond pulsed ion beams are utilized. Preliminary data of channeling experiments using lithium and potassium ions and silicon membranes are shown. We compare these data to simulation results using Crystal Trim. Furthermore, we discuss the improvements to the accelerator to higher performance levels and the new diagnostics tools that are being incorporated.

  8. Accessing defect dynamics using intense, nanosecond pulsed ion beams

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Persaud, A.; Barnard, J. J.; Guo, H.; Hosemann, P.; Lidia, S.; Minor, A. M.; Seidl, P. A.; Schenkel, T.

    2015-06-18

    Gaining in-situ access to relaxation dynamics of radiation induced defects will lead to a better understanding of materials and is important for the verification of theoretical models and simulations. We show preliminary results from experiments at the new Neutralized Drift Compression Experiment (NDCX-II) at Lawrence Berkeley National Laboratory that will enable in-situ access to defect dynamics through pump-probe experiments. Here, the unique capabilities of the NDCX-II accelerator to generate intense, nanosecond pulsed ion beams are utilized. Preliminary data of channeling experiments using lithium and potassium ions and silicon membranes are shown. We compare these data to simulation results using Crystalmore » Trim. Furthermore, we discuss the improvements to the accelerator to higher performance levels and the new diagnostics tools that are being incorporated.« less

  9. Access to Capital | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Soft Costs Access to Capital Access to Capital Photo of a room full of people seated in rows with a few standing in the background. Two hands in the crowd are holding up sheets ...

  10. NBP RFI: Data Access | Department of Energy

    Office of Environmental Management (EM)

    Broadband Plan by Empowering Customers and the Smart Grid: Data Access, Third Party Use, and Privacy NBP RFI: Data Access (6.9 MB) More Documents & Publications RE: NBP RFI: ...

  11. Groove refinishing tool

    DOE Patents [OSTI]

    Kellogg, Harvey J.; Holm, Robert O.

    1983-01-01

    A groove refinishing tool which utilizes a finishing wheel which is controlled by an air grinder motor. The air grinder motor is mounted on a main body section which is pivotally attached to a shoe element. The shoe element contains guide pins which guide the shoe element on the groove to be refinished. Application of pressure on the main body element compresses a weight counterbalance spring to extend the finishing wheel through the shoe element to refinish the groove surface. A window is provided for viewing the refinishing operation. Milling operations can also be performed by replacing the finishing wheel with a milling wheel.

  12. Cyber Security Evaluation Tool

    Energy Science and Technology Software Center (OSTI)

    2009-08-03

    CSET is a desktop software tool that guides users through a step-by-step process to assess their control system network security practices against recognized industry standards. The output from CSET is a prioritized list of recommendations for improving the cyber security posture of your organization’s ICS or enterprise network. CSET derives the recommendations from a database of cybersecurity standards, guidelines, and practices. Each recommendation is linked to a set of actions that can be applied tomore » enhance cybersecurity controls.« less

  13. Cyber Security Evaluation Tool

    SciTech Connect (OSTI)

    2009-08-03

    CSET is a desktop software tool that guides users through a step-by-step process to assess their control system network security practices against recognized industry standards. The output from CSET is a prioritized list of recommendations for improving the cyber security posture of your organization?¢????s ICS or enterprise network. CSET derives the recommendations from a database of cybersecurity standards, guidelines, and practices. Each recommendation is linked to a set of actions that can be applied to enhance cybersecurity controls.

  14. Graphical Contingency Analysis Tool

    Energy Science and Technology Software Center (OSTI)

    2010-03-02

    GCA is a visual analytic tool for power grid contingency analysis to provide more decision support for power grid operations. GCA allows power grid operators to quickly gain situational awareness of power grid by converting large amounts of operational data to graphic domain with a color contoured map; identify system trend and foresee and discern emergencies by performing trending analysis; identify the relationships between system configurations and affected assets by conducting clustering analysis; and identifymore » the best action by interactively evaluate candidate actions.« less

  15. DOE Public Access Plan | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    DOE Public Access Plan DOE Public Access Plan On February 22, 2013, the Director of the White House Office of Science and Technology Policy (OSTP), Dr. John Holdren, issued a memorandum to all agency and department heads entitled, "Increasing Access to the Results of Federally Funded Scientific Research." The memo directed federal agencies with more than $100 million in annual conduct of research and development to develop plans for increasing public access to peer-reviewed scientific

  16. Identity, Credential, and Access Management (ICAM)

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2013-02-19

    To establish requirements and responsibilities for DOE identity, credential, and access management program. Cancels DOE N 206.4.

  17. Accessibility Standard Statement | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Services » Assistive Technology » Accessibility Standard Statement Accessibility Standard Statement The U.S. Department of Energy is committed to making its electronic and information technologies accessible to individuals with disabilities in accordance with Section 508 of the Rehabilitation Act (29 U.S.C. 794d), as amended in 1998. Send feedback or concerns related to the accessibility of this website to DOE Section 508 Coordinator mailbox For more information about Section 508, please visit

  18. A New Collaborative Tool for Visually Understanding National Health Indicators

    SciTech Connect (OSTI)

    Xu, Songhua; Jewell, Brian C; Steed, Chad A; Schryver, Jack C

    2012-01-01

    The authors propose a new online collaborative tool for visually understanding national health indicators, which facilitates the full spectrum of investigation of indicators, from an overview of all the correlation coefficients between variables, to investigation of subsets of selected variables, and to individual data element analysis. this tool is publicly accessible at http://cda.ornl.gov/heat/heatmap.html. In this paper, they discuss the key issues regarding the interface design and implementation. They also illustrate how to use their interface for analyzing the health indicator dataset by showing some key system views. In the end, they introduce and discuss some ongoing research efforts extending this work.

  19. New Modeling Tool Analyzes Floating Platform Concepts | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Modeling Tool Analyzes Floating Platform Concepts New Modeling Tool Analyzes Floating Platform Concepts May 20, 2011 - 3:16pm Addthis This is an excerpt from the Second Quarter 2011 edition of the Wind Program R&D Newsletter. The United States has a large and accessible offshore wind resource. According to a report published by DOE's National Renewable Energy Laboratory (NREL) in 2010 (Large-Scale Offshore Wind Power in the United States), winds off the coasts of the United States

  20. Get Access to Work Onsite

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Get Access to Work Onsite Print The following process MUST be completed online by new and returning users at least TWO WEEKS prior to arrival at the ALS. Not a U.S. citizen? Please look at Documents for Foreign Nationals well ahead of your visit. Bring all relevant documents to the ALS in order to complete your registration. NOTE: Users who are citizens of, or were born in, T4 countries (Cuba, Iran, Sudan, and Syria) need DOE permission to work at the ALS, a process which can take 4-6 months to

  1. Get Access to Work Onsite

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Get Access to Work Onsite Print The following process MUST be completed online by new and returning users at least TWO WEEKS prior to arrival at the ALS. Not a U.S. citizen? Please look at Documents for Foreign Nationals well ahead of your visit. Bring all relevant documents to the ALS in order to complete your registration. NOTE: Users who are citizens of, or were born in, T4 countries (Cuba, Iran, Sudan, and Syria) need DOE permission to work at the ALS, a process which can take 4-6 months to

  2. Manufactured Homes Tool

    Energy Science and Technology Software Center (OSTI)

    2005-03-09

    The MH Tool software is designed to evaluate existing and new manufactured homes for structural adequacy in high winds. Users define design elements of a manufactured home and then select the hazard(s) for analysis. MH Tool then calculates and reports structural analysis results for the specified design and hazard Method of Solution: Design engineers input information (geometries, materials, etc.) describing the structure of a manufactured home, from which the software automatically creates a mathematical model.more » Windows, doors, and interior walls can be added to the initial design. HUD Code loads (wind, snow loads, interior live loads, etc.) are automatically applied. A finite element analysis is automatically performed using a third party solver to find forces and stresses throughout the structure. The designer may then employ components of strength (and cost) most appropriate for the loads that must be carried at each location, and then re-run the analysis for verification. If forces and stresses are still within tolerable limits (such as the HUD requirements), construction costs would be reduced without sacrificing quality.« less

  3. Treatment Deployment Evaluation Tool

    SciTech Connect (OSTI)

    Rynearson, Michael Ardel; Plum, Martin Michael

    1999-08-01

    The U.S. Department of Energy (DOE) is responsible for the final disposition of legacy spent nuclear fuel (SNF). As a response, DOE's National Spent Nuclear Fuel Program (NSNFP) has been given the responsibility for the disposition of DOE -owned SNF. Many treatment technologies have been identified to treat some forms of SNF so that the resulting treated product is acceptable by the disposition site. One of these promising treatment processes is the electrometallurgical treatment (EMT) currently in development; a second is an Acid Wash Decladding process. The NSNFP has been tasked with identifying possible strategies for the deployment of these treatment processes in the event that the treatment path is deemed necessary. To support the siting studies of these strategies, economic evaluations are being performed to identify the least-cost deployment path. This model (tool) was developed to consider the full scope of costs, technical feasibility, process material disposition, and schedule attributes over the life of each deployment alternative. Using standard personal computer (PC) software, the model was developed as a comprehensive technology economic assessment tool using a Life-Cycle Cost (LCC) analysis methodology. Model development was planned as a systematic, iterative process of identifying and bounding the required activities to dispose of SNF. To support the evaluation process, activities are decomposed into lower level, easier to estimate activities. Sensitivity studies can then be performed on these activities, defining cost issues and testing results against the originally stated problem.

  4. Fan System Assessment Tool (FSAT)

    Broader source: Energy.gov [DOE]

    The Fan System Assessment Tool (FSAT) is a free online software tool that helps industrial users quantify energy use and savings opportunities in industrial fan systems. Use FSAT to understand how...

  5. HPC Debugging and Performance Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Debugging and Performance Tools HPC Debugging and Performance Tools February 16, 2012 L An error occurred. Try watching this video on www.youtube.com, or enable JavaScript if it is...

  6. Built Environment Energy Analysis Tool

    Broader source: Energy.gov [DOE]

    This documentation describes the development of a tool created to evaluate the effects of built environment scenarios on transportation energy and greenhouse gas (GHG) emissions, and provides guidance on how to apply the tool.

  7. User Experience Research Online Tools

    Broader source: Energy.gov [DOE]

    The Office of Energy Efficiency and Renewable Energy (EERE) has a variety of online tools to help you conduct user experience (UX) research. The following tools are free for use by staff and contractors who work on the EERE website.

  8. Wafer handling and placement tool

    DOE Patents [OSTI]

    Witherspoon, Linda L.

    1988-01-05

    A spring arm tool is provided for clamp engaging and supporting wafers while the tool is hand held. The tool includes a pair of relatively swingable jaw element supporting support arms and the jaw elements are notched to enjoy multiple point contact with a wafer peripheral portion. Also, one disclosed form of the tool includes remotely operable workpiece ejecting structure carried by the jaw elements thereof.

  9. Prioritization Tool Measurement Input Form

    Office of Energy Efficiency and Renewable Energy (EERE)

    BTO encourages stakeholders to recommend updates and improvements to the Prioritization Tool by using the below Measure Input Form.

  10. HPC_Tools-Gerber.pptx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    6, 2012 * Introduction * Debugging * Performance / Optimization Outline Videos, presentations, and references: http://www.nersc.gov/users/training/courses/CS267/ Also see the DOE Advanced Computational Tools: http://acts.nersc.gov 3 * Today's Talks - Strategies for parallel performance (D. Skinner) - Debugging and optimization tools (R. Gerber) * Take Aways - Common problems to look out for - How tools work in general - A few specific tools you can try - Where to get more information

  11. Time Ordered Astrophysics Scalable Tools

    Energy Science and Technology Software Center (OSTI)

    2011-12-14

    This software package provides tools for astrophysical experiments which record data in the form of individual time streams from discrete detectors. TOAST provides tools from meta-data manipulation and job set up, I/O operation, telescope pointing reconstruction, and map-making. It also provides tools for constructing simulated observations.

  12. Access to UCNI | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    UCNI Access to UCNI An authorized person [see § 1017.20(a)] may grant routine access to UCNI to eligible individuals. In order to be eligible for routine access, the person must have a need to know the UCNI in order to perform official duties or other Government-authorized activities and meet the criteria in § 1017.20(b). If a person does not meet the criteria for routine access, a special request for limited access must be submitted in accordance with § 1017.21(a). Policy Questions and

  13. Transmission Planning Analysis Tool

    SciTech Connect (OSTI)

    2015-06-23

    Developed to solve specific problem: Assist transmission planning for regional transfers in interconnected power systems. This work was originated in a study for the U.S. Department of State, to recommend transmission reinforcements for the Central American regional system that interconnects 6 countries. Transmission planning analysis is currently performed by engineers with domainspecific and systemspecific knowledge without a unique methodology. The software codes of this disclosure assists engineers by defining systematic analysis procedures to help identify weak points and make decisions on transmission planning of regional interconnected power systems. Transmission Planning Analysis Tool groups PSS/E results of multiple AC contingency analysis and voltage stability analysis and QV analysis of many scenarios of study and arrange them in a systematic way to aid power system planning engineers or transmission operators in effective decision]making process or in the off]line study environment.

  14. Bio Risk Assessment Tool

    Energy Science and Technology Software Center (OSTI)

    2004-07-22

    The Biosecurity Risk Assessment Tool (BRAT) is a new type of computer application for the screening-level assessment of risk to dairy operations. BRAT for Dairies is designed to be intuitive and easy to use. Users enter basic data-property address, feed management, employee population, and so on - into the interface. Using these data and rules found in an expert system. BRAT for Dairies consults appropriate sections of its database. The expert system determines the riskmore » implications of the basic data, e.g. diseases are closely tied to pen location with respect to the outside world, When the analysis is complete, BRAT for Dairies evaluates and allocates the risk for each hazard, ranks the risks, and displays the results graphically.« less

  15. Transmission Planning Analysis Tool

    Energy Science and Technology Software Center (OSTI)

    2015-06-23

    Developed to solve specific problem: Assist transmission planning for regional transfers in interconnected power systems. This work was originated in a study for the U.S. Department of State, to recommend transmission reinforcements for the Central American regional system that interconnects 6 countries. Transmission planning analysis is currently performed by engineers with domainspecific and systemspecific knowledge without a unique methodology. The software codes of this disclosure assists engineers by defining systematic analysis procedures to help identifymore » weak points and make decisions on transmission planning of regional interconnected power systems. Transmission Planning Analysis Tool groups PSS/E results of multiple AC contingency analysis and voltage stability analysis and QV analysis of many scenarios of study and arrange them in a systematic way to aid power system planning engineers or transmission operators in effective decision]making process or in the off]line study environment.« less

  16. Tools for Understanding Identity

    SciTech Connect (OSTI)

    Creese, Sadie; Gibson-Robinson, Thomas; Goldsmith, Michael; Hodges, Duncan; Kim, Dee DH; Love, Oriana J.; Nurse, Jason R.; Pike, William A.; Scholtz, Jean

    2013-12-28

    Identity attribution and enrichment is critical to many aspects of law-enforcement and intelligence gathering; this identity typically spans a number of domains in the natural-world such as biographic information (factual information – e.g. names, addresses), biometric information (e.g. fingerprints) and psychological information. In addition to these natural-world projections of identity, identity elements are projected in the cyber-world. Conversely, undesirable elements may use similar techniques to target individuals for spear-phishing attacks (or worse), and potential targets or their organizations may want to determine how to minimize the attack surface exposed. Our research has been exploring the construction of a mathematical model for identity that supports such holistic identities. The model captures the ways in which an identity is constructed through a combination of data elements (e.g. a username on a forum, an address, a telephone number). Some of these elements may allow new characteristics to be inferred, hence enriching the holistic view of the identity. An example use-case would be the inference of real names from usernames, the ‘path’ created by inferring new elements of identity is highlighted in the ‘critical information’ panel. Individual attribution exercises can be understood as paths through a number of elements. Intuitively the entire realizable ‘capability’ can be modeled as a directed graph, where the elements are nodes and the inferences are represented by links connecting one or more antecedents with a conclusion. The model can be operationalized with two levels of tool support described in this paper, the first is a working prototype, the second is expected to reach prototype by July 2013: Understanding the Model The tool allows a user to easily determine, given a particular set of inferences and attributes, which elements or inferences are of most value to an investigator (or an attacker). The tool is also able to take

  17. DEVELOPMENT OF REMOTE HANFORD CONNECTOR GASKET REPLACEMENT TOOLING FOR DWPF

    SciTech Connect (OSTI)

    Krementz, D.; Coughlin, Jeffrey

    2009-05-05

    The Defense Waste Processing Facility (DWPF) requested the Savannah River National Laboratory (SRNL) to develop tooling and equipment to remotely replace gaskets in mechanical Hanford connectors to reduce personnel radiation exposure as compared to the current hands-on method. It is also expected that radiation levels will continually increase with future waste streams. The equipment is operated in the Remote Equipment Decontamination Cell (REDC), which is equipped with compressed air, two master-slave manipulators (MSM's) and an electro-mechanical manipulator (EMM) arm for operation of the remote tools. The REDC does not provide access to electrical power, so the equipment must be manually or pneumatically operated. The MSM's have a load limit at full extension of ten pounds, which limited the weight of the installation tool. In order to remotely replace Hanford connector gaskets several operations must be performed remotely, these include: removal of the spent gasket and retaining ring (retaining ring is also called snap ring), loading the new snap ring and gasket into the installation tool and installation of the new gasket into the Hanford connector. SRNL developed and tested tools that successfully perform all of the necessary tasks. Removal of snap rings from horizontal and vertical connectors is performed by separate air actuated retaining ring removal tools and is manipulated in the cell by the MSM. In order install a new gasket, the snap ring loader is used to load a new snap ring into a groove in the gasket installation tool. A new gasket is placed on the installation tool and retained by custom springs. An MSM lifts the installation tool and presses the mounted gasket against the connector block. Once the installation tool is in position, the gasket and snap ring are installed onto the connector by pneumatic actuation. All of the tools are located on a custom work table with a pneumatic valve station that directs compressed air to the desired tool and

  18. Downhole tool adapted for telemetry

    DOE Patents [OSTI]

    Hall, David R.; Fox, Joe

    2010-12-14

    A cycleable downhole tool such as a Jar, a hydraulic hammer, and a shock absorber adapted for telemetry. This invention applies to other tools where the active components of the tool are displaced when the tool is rotationally or translationally cycled. The invention consists of inductive or contact transmission rings that are connected by an extensible conductor. The extensible conductor permits the transmission of the signal before, after, and during the cycling of the tool. The signal may be continuous or intermittent during cycling. The invention also applies to downhole tools that do not cycle, but in operation are under such stress that an extensible conductor is beneficial. The extensible conductor may also consist of an extensible portion and a fixed portion. The extensible conductor also features clamps that maintain the conductor under stresses greater than that seen by the tool, and seals that are capable of protecting against downhole pressure and contamination.

  19. SLAC All Access: Laser Labs

    ScienceCinema (OSTI)

    Minitti, Mike; Woods Mike

    2014-06-03

    From supermarket checkouts to video game consoles, lasers are ubiquitous in our lives. Here at SLAC, high-power lasers are critical to the cutting-edge research conducted at the laboratory. But, despite what you might imagine, SLAC's research lasers bear little resemblance to the blasters and phasers of science fiction. In this edition of All Access we put on our safety goggles for a peek at what goes on inside some of SLAC's many laser labs. LCLS staff scientist Mike Minitti and SLAC laser safety officer Mike Woods detail how these lasers are used to study the behavior of subatomic particles, broaden our understanding of cosmic rays and even unlock the mysteries of photosynthesis.

  20. Sealed head access area enclosure

    DOE Patents [OSTI]

    Golden, Martin P.; Govi, Aldo R.

    1978-01-01

    A liquid-metal-cooled fast breeder power reactor is provided with a sealed head access area enclosure disposed above the reactor vessel head consisting of a plurality of prefabricated structural panels including a center panel removably sealed into position with inflatable seals, and outer panels sealed into position with semipermanent sealant joints. The sealant joints are located in the joint between the edge of the panels and the reactor containment structure and include from bottom to top an inverted U-shaped strip, a lower layer of a room temperature vulcanizing material, a separator strip defining a test space therewithin, and an upper layer of a room temperature vulcanizing material. The test space is tapped by a normally plugged passage extending to the top of the enclosure for testing the seal or introducing a buffer gas thereinto.

  1. Nation Radiobiology Archives Distributed Access

    Energy Science and Technology Software Center (OSTI)

    1992-06-01

    NRADA1.1 is a supplement to NRADA1.0. This version eliminates several bugs, and includes a few new features. The diskettes consist of a distributed subset of information representative of the extensive NRA databases and database access software maintained at the Pacific Northwest Laboratory which provide an introduction to the scope and style of the NRA Information Systems. Information in the NRA Summary, Inventory, and Bibliographic database is available upon request. Printed reports have been provided inmore » the past. The completion of the NRADA1.1 is the realization of a long standing goal of the staff and advisory committee. Information may be easily distributed to the user in an electronic form which preserves the relationships between the various databases.« less

  2. Property:EnergyAccessYearInitiated | Open Energy Information

    Open Energy Info (EERE)

    + Burkina Faso Energy Access Project + 2007 + E Ethiopia Energy Access Project + 2005 + G Ghana Energy Development and Access Project (GEDAP) + 2007 + M Mongolia Renewable Energy...

  3. Property:EnergyAccessWebsite | Open Energy Information

    Open Energy Info (EERE)

    search Property Name EnergyAccessWebsite Property Type URL Description Energy Access Source Retrieved from "http:en.openei.orgwindex.php?titleProperty:EnergyAccessWeb...

  4. Property:EnergyAccessPartner | Open Energy Information

    Open Energy Info (EERE)

    search Property Name EnergyAccessPartner Property Type Boolean Description Energy Access Partner Retrieved from "http:en.openei.orgwindex.php?titleProperty:EnergyAccessPa...

  5. IEA-Electricity Access Database | Open Energy Information

    Open Energy Info (EERE)

    - Energy Access Resource Type: Dataset Website: www.iea.orgweoelectricity.asp Language: English IEA-Electricity Access Database Screenshot References: Electricity Access...

  6. Video, Audio, and Animation Text Versions for Web Accessibility...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Videos, Animations, & Audio Video, Audio, and Animation Text Versions for Web Accessibility Video, Audio, and Animation Text Versions for Web Accessibility For accessibility, ...

  7. Tool and Fixture Design

    SciTech Connect (OSTI)

    Graham, Mark W.

    2015-07-28

    In a manufacturing process, a need is identified and a product is created to fill this need. While design and engineering of the final product is important, the tools and fixtures that aid in the creation of the final product are just as important, if not more so. Power supplies assembled at the TA-55 PF-5 have been designed by an excellent engineering team. The task in PF-5 now is to ensure that all steps of the assembly and manufacturing process can be completed safely, reliably, and in a quality repeatable manner. One of these process steps involves soldering fine wires to an electrical connector. During the process development phase, the method of soldering included placing the power supply in a vice in order to manipulate it into a position conducive to soldering. This method is unacceptable from a reliability, repeatability, and ergonomic standpoint. To combat these issues, a fixture was designed to replace the current method. To do so, a twelve step engineering design process was used to create the fixture that would provide a solution to a multitude of problems, and increase the safety and efficiency of production.

  8. PD and CL Tool

    Energy Science and Technology Software Center (OSTI)

    2007-03-01

    This software is a tool used to quickly solve for probability of success and confidence calculations for binomial data. This is the equation that allows the calculation of confidence level based on the target probability of success, the number of trials in a test and the number of misses (failed trials) allowed in a test plan. This equation is difficult to use and for plans other than when the number of misses allowed is zeromore » the equation cannot be solved algebraically for the number of trials required. The equation then has to be solved numerically for the number or required trials by repeatedly guessing numbers of trials and solving the equation until the confidence level is met or exceeded. This process is tiresome when done manually but the equation is easily programmed into a computer. Tables of these results can be found in statistical texts and on the internet. This software program allows the user to quickly solve the equation by plugging in the known values and solving the equation.« less

  9. Demand Response Quick Assessment Tool

    Energy Science and Technology Software Center (OSTI)

    2008-12-01

    DRQAT (Demand Response Quick Assessment Tool) is the tool for assessing demand response saving potentials for large commercial buildings. This tool is based on EnergyPlus simulations of prototypical buildings and HVAC equipment. The opportunities for demand reduction and cost savings with building demand responsive controls vary tremendously with building type and location. The assessment tools will predict the energy and demand savings, the economic savings, and the thermal comfor impact for various demand responsive strategies.more » Users of the tools will be asked to enter the basic building information such as types, square footage, building envelope, orientation, utility schedule, etc. The assessment tools will then use the prototypical simulation models to calculate the energy and demand reduction potential under certain demand responsive strategies, such as precooling, zonal temperature set up, and chilled water loop and air loop set points adjustment.« less

  10. Directives Tools - DOE Directives, Delegations, and Requirements

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Accessibility Text size: (Requires JavaScript) Large Normal Small This site uses the Open Source Content Management System Plone and has been designed to be completely accessible and usable, working in accordance with the Web Content Accessibility Guidelines (WCAG v1.0). If there is anything on this site - accessibility or validation related - that is not according to the standard, please contact the Site Administration, and not the Plone Team. Access keys Access keys are a navigation device