Sample records for accepted professional guidelines

  1. Professional Guideline Series: Guidelines for Professional Employment

    E-Print Network [OSTI]

    Professional Guideline Series: Guidelines for Professional Employment A Framework For Communication Prepared by IEEE-USA's Career and Employment Services Committee #12;IEEE-USA Professional Guideline Series TABLE OF CONTENTS INTRODUCTION 3 I. CAREER OUTLOOK 4 II. RECRUITMENT 6 III. PROFESSIONAL EMPLOYMENT 8

  2. Guidelines for Home Energy Professionals Project Glossary

    Broader source: Energy.gov [DOE]

    This document contains key terms and definitions used in the Guidelines for Home Energy Professionals Project.

  3. Guidelines, Checklist, and Contract Clauses for Government Acceptance...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Guidelines, Checklist, and Contract Clauses for Government Acceptance of Super ESPC Projects Guidelines, Checklist, and Contract Clauses for Government Acceptance of Super ESPC...

  4. Guidelines for Home Energy Professionals Project (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2014-03-01T23:59:59.000Z

    The Guidelines for Home Energy Professionals is a collaboration between the U.S. Department of Energy (DOE) and a wide range of home energy performance industry professionals. The Guidelines project, managed by the National Renewable Energy Laboratory (NREL) for DOE, addresses the need for a highly-skilled weatherization workforce equipped to complete consistent, high-quality home energy upgrades for single-family homes, multifamily homes, and manufactured housing. In doing so, it helps increase energy efficiency in housing, which can mitigate climate change, one of the major challenges of the 21st century.

  5. Appendix C: DOE Super-ESPC Project Acceptance Guidelines and...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Guidelines, Checklist, and Contract Clauses for Government Acceptance of DOE Super-ESPC Projects ECM Installation: All ECMs are installed in accordance with plans,...

  6. Guidelines and Checklist for Commissioning and Government Acceptance...

    Broader source: Energy.gov (indexed) [DOE]

    Checklist, and Contract Clauses for Government Acceptance of Super ESPC Projects Commissioning Guidance for ESPCs Draft M&V Guidelines: Measurement and Verification for Federal...

  7. Guidelines for Home Energy Professionals Project: Benefits for...

    Office of Environmental Management (EM)

    weatherization worker putting on personal protective equipment to prepare for adding insulation to this home. The Guidelines for Home Energy Professionals project fosters the...

  8. Guidelines for Home Energy Professionals Project: Benefits for...

    Energy Savers [EERE]

    Administrators Photo of a weatherization worker reviewing notes conducted during an energy audit on a clipboard. The Guidelines for Home Energy Professionals project fosters the...

  9. Guidelines for Home Energy Professionals Project: Benefits for...

    Energy Savers [EERE]

    for Employers and Contractors Photo of a weatherization worker writing notes for an energy audit on a clipboard. The Guidelines for Home Energy Professionals project fosters the...

  10. Transcript of the Guidelines for Home Energy Professionals project Prezi presentation.

    Broader source: Energy.gov [DOE]

    This document contains the transcript of the Guidelines for Home Energy Professionals project Prezi presentation.

  11. Guidelines and Checklist for Commissioning and Government Acceptance of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't YourTransport(Fact Sheet), GeothermalGrid Integration0-1 March 2013 PurchasingGuidelineESPC

  12. Guidelines for Home Energy Professionals Project: Benefits for...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    professionals who will install energy upgrades effectively. Photo of a house with solar panels. Living Comfortably: A Consumer's Guide to Home Energy Upgrades An...

  13. Utility-Scale Power Tower Solar Systems: Performance Acceptance Test Guidelines

    SciTech Connect (OSTI)

    Kearney, D.

    2013-03-01T23:59:59.000Z

    The purpose of these Guidelines is to provide direction for conducting performance acceptance testing for large power tower solar systems that can yield results of a high level of accuracy consistent with good engineering knowledge and practice. The recommendations have been developed under a National Renewable Energy Laboratory (NREL) subcontract and reviewed by stakeholders representing concerned organizations and interests throughout the concentrating solar power (CSP) community. An earlier NREL report provided similar guidelines for parabolic trough systems. These Guidelines recommend certain methods, instrumentation, equipment operating requirements, and calculation methods. When tests are run in accordance with these Guidelines, we expect that the test results will yield a valid indication of the actual performance of the tested equipment. But these are only recommendations--to be carefully considered by the contractual parties involved in the Acceptance Tests--and we expect that modifications may be required to fit the particular characteristics of a specific project.

  14. Dimensions of Family and Professional Partnerships: Constructive Guidelines for Collaboration

    E-Print Network [OSTI]

    Blue-Banning, Martha; Summers, Jean Ann; Frankland, H. Corine; Lord Nelson, Louise G.; Beegle, Gwen

    2004-01-01T23:59:59.000Z

    adolescents and young adults with disabilities. Both stakeholder groups identified the disparity of Winter 2004 168 power and authority in the relationship between parents and professionals as a major challenge to successful partnerships... equally powerful in their ability to influence outcomes for children and families. Avoiding use of "clout" Empowering partners Validating others Advocating for child or family with other professionals Allowing reciprocity among members Being...

  15. Guidelines for Home Energy Professionals: Request for Information

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't YourTransport(Fact Sheet), GeothermalGrid Integration0-1 March 2013Energy Guidelines Request

  16. Development of Performance Acceptance Test Guidelines for Large Commercial Parabolic Trough Solar Fields: Preprint

    SciTech Connect (OSTI)

    Kearney, D.; Mehos, M.

    2010-12-01T23:59:59.000Z

    Prior to commercial operation, large solar systems in utility-size power plants need to pass a performance acceptance test conducted by the EPC contractor or owners. In lieu of the present absence of engineering code developed for this purpose, NREL has undertaken the development of interim guidelines to provide recommendations for test procedures that can yield results of a high level of accuracy consistent with good engineering knowledge and practice. The fundamental differences between acceptance of a solar power plant and a conventional fossil-fired plant are the transient nature of the energy source and the necessity to utilize an analytical performance model in the acceptance process. These factors bring into play the need to establish methods to measure steady state performance, potential impacts of transient processes, comparison to performance model results, and the possible requirement to test, or model, multi-day performance within the scope of the acceptance test procedure. The power block and BOP are not within the boundaries of this guideline. The current guideline is restricted to the solar thermal performance of parabolic trough systems and has been critiqued by a broad range of stakeholders in CSP development and technology.

  17. Acceptance Performance Test Guideline for Utility Scale Parabolic Trough and Other CSP Solar Thermal Systems: Preprint

    SciTech Connect (OSTI)

    Mehos, M. S.; Wagner, M. J.; Kearney, D. W.

    2011-08-01T23:59:59.000Z

    Prior to commercial operation, large solar systems in utility-size power plants need to pass a performance acceptance test conducted by the engineering, procurement, and construction (EPC) contractor or owners. In lieu of the present absence of ASME or other international test codes developed for this purpose, the National Renewable Energy Laboratory has undertaken the development of interim guidelines to provide recommendations for test procedures that can yield results of a high level of accuracy consistent with good engineering knowledge and practice. Progress on interim guidelines was presented at SolarPACES 2010. Significant additions and modifications were made to the guidelines since that time, resulting in a final report published by NREL in April 2011. This paper summarizes those changes, which emphasize criteria for assuring thermal equilibrium and steady state conditions within the solar field.

  18. Utility-Scale Parabolic Trough Solar Systems: Performance Acceptance Test Guidelines, April 2009 - December 2010

    SciTech Connect (OSTI)

    Kearney, D.

    2011-05-01T23:59:59.000Z

    Prior to commercial operation, large solar systems in utility-size power plants need to pass a performance acceptance test conducted by the engineering, procurement, and construction (EPC) contractor or owners. In lieu of the present absence of ASME or other international test codes developed for this purpose, the National Renewable Energy Laboratory has undertaken the development of interim guidelines to provide recommendations for test procedures that can yield results of a high level of accuracy consistent with good engineering knowledge and practice. The Guidelines contained here are specifically written for parabolic trough collector systems with a heat-transport system using a high-temperature synthetic oil, but the basic principles are relevant to other CSP systems.

  19. Evidence-linked, clinical practice guidelines—getting serious; getting professional

    E-Print Network [OSTI]

    Linskey, Mark E.; Kalkanis, Steven N.

    2010-01-01T23:59:59.000Z

    measures, educational materials and tools, guidelines andconsensus process measures. Guidelines differ in quality and

  20. National committee on radiation protection, 1928-1960: from professional guidelines to government regulation

    SciTech Connect (OSTI)

    Whittemore, G.F.

    1986-01-01T23:59:59.000Z

    The National Committee on Radiation Protection is a private, self-perpetuating body of radiation experts founded in 1928 which, except during World War II, has established the basic guidelines for radiation safety in the United States. This dissertation examines three themes in its history from 1928 to 1960. On an intellectual level, how do scientists make judgments when called upon to perform a legal function, instead of conduct research. On an institutional level, how does a scientific committee develop when it serves a medical, industrial, and legal constituency larger than the research community of the scientist themselves. On a political level, how has the development of atomic energy influenced both the intellectual content of the radiation safety standards and the institutional form of the NCRP. Institutional and political concerns were found to play a significant role in the NCRP's intellectual work from 1928 to 1960. The time span can be divided into three periods, revealing a growing politicization of radiation safety: professional self-regulation (1928-1941), government advisory committee (1946-1954), and public controversy and increasing legislation (1954-1960). In 1959, political controversy led to the establishment of the Federal Radiation Council, a government agency which was to replace the NCRP.

  1. Guidelines, Checklist, and Contract Clauses for Government Acceptance of Super ESPC Projects

    Broader source: Energy.gov [DOE]

    Document lists all the elements required for a completed super energy savings performance contract (ESPC) project to receive Federal government acceptance.

  2. Guidelines for Home Energy Upgrade Professionals: Standard Work Specifications for Multifamily Energy Upgrades (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2011-08-01T23:59:59.000Z

    This fact sheet provides essential information about the 2011 publication of the Workforce Guidelines for Multifamily Home Energy Upgrades, including their origin, their development with the help of industry leaders to create the standard work specifications for retrofit work.

  3. Guidelines for Home Energy Professionals: Standard Work Specifications for Single-Family Home Energy Upgrades

    Broader source: Energy.gov [DOE]

    The Standard Work Specifications (SWS) for Single-Family Home Energy Upgrades define the minimum acceptable outcomes for any weatherization or home performance task to be effective, durable, and safe.

  4. Municipal Solid Waste Landfills The following Oklahoma landfills currently accept dead livestock. As each facility has different guidelines and

    E-Print Network [OSTI]

    Balasundaram, Balabhaskar "Baski"

    Municipal Solid Waste Landfills The following Oklahoma landfills currently accept dead livestock-581-3468 Garfield City of Enid Landfill 580-249-4917 Garvin Foster Waste Disposal Landfill 405-238-2012 Jackson City-436-1403 Call ahead, may limit qty. Pottawatomie Absolute Waste Solutions 405-598-3893 Call ahead Seminole

  5. Guidelines for generators to meet HWHF acceptance requirements for hazardous, radioactive, and mixed wastes at Berkeley Lab. Revision 3

    SciTech Connect (OSTI)

    Albert, R.

    1996-06-01T23:59:59.000Z

    This document provides performance standards that one, as a generator of hazardous chemical, radioactive, or mixed wastes at the Berkeley Lab, must meet to manage their waste to protect Berkeley Lab staff and the environment, comply with waste regulations and ensure the continued safe operation of the workplace, have the waste transferred to the correct Waste Handling Facility, and enable the Environment, Health and Safety (EH and S) Division to properly pick up, manage, and ultimately send the waste off site for recycling, treatment, or disposal. If one uses and generates any of these wastes, one must establish a Satellite Accumulation Area and follow the guidelines in the appropriate section of this document. Topics include minimization of wastes, characterization of the wastes, containers, segregation, labeling, empty containers, and spill cleanup and reporting.

  6. Interconnection Guidelines

    Broader source: Energy.gov [DOE]

    The South Carolina Public Service Commission (PSC) adopted simplified interconnection guidelines for small distributed generation (DG) in December 2006. These guidelines address renewable-energy...

  7. 148 SDSU Curriculum Guide 2010 University Guidelines for Certificate Programs

    E-Print Network [OSTI]

    Ponce, V. Miguel

    148 SDSU Curriculum Guide 2010 University Guidelines for Certificate Programs (Guidelines Based on Executive Order 806) Types of Certificate Programs San Diego State University offers two types of certificate programs: · Academic certificate programs, and · Professional certificate programs. Academic

  8. Interconnection Guidelines

    Broader source: Energy.gov [DOE]

    The interconnection guidelines state that the utility can require a customer to have liability insurance, if the insurance is easily available at a reasonable cost to the customer.  No external...

  9. Interconnection Guidelines

    Broader source: Energy.gov [DOE]

    Kansas adopted the Net Metering and Easy Connection Act in May 2009 (see K.S.A. 66-1263 through 66-1271), establishing interconnection guidelines and net metering for customer-owned generators. Net...

  10. Policy #2010 Publications Policy and Graphic Guidelines 1 OLD DOMINION UNIVERSITY

    E-Print Network [OSTI]

    's professional image. Graphic Guidelines Visual standards applied to advertising, publications and other printed materials. F. PROCEDURES Graphic identity program standards, as wellPolicy #2010 ­ Publications Policy and Graphic Guidelines 1 OLD DOMINION UNIVERSITY University

  11. Green Fund Proposal Guidelines March 15, 2010 UNBC GREEN FUND PROPOSAL GUIDELINES

    E-Print Network [OSTI]

    Northern British Columbia, University of

    Green Fund Proposal Guidelines March 15, 2010 UNBC GREEN FUND PROPOSAL GUIDELINES In order to advance the overall sustainability of UNBC as an institution a "UNBC Green Fund" has been created from UNBC parking revenues. Green research and project proposals will be accepted by the Green University

  12. Green Fund Proposal Guidelines September 15, 2010 UNBC GREEN FUND PROPOSAL GUIDELINES

    E-Print Network [OSTI]

    Northern British Columbia, University of

    Green Fund Proposal Guidelines September 15, 2010 UNBC GREEN FUND PROPOSAL GUIDELINES In order to advance the overall sustainability of UNBC as an institution a "UNBC Green Fund" has been created from UNBC parking revenues. Green research and project proposals will be accepted by the Green University

  13. Green Fund Proposal Guidelines August 10, 2012 UNBC GREEN FUND PROPOSAL GUIDELINES

    E-Print Network [OSTI]

    Northern British Columbia, University of

    Green Fund Proposal Guidelines August 10, 2012 UNBC GREEN FUND PROPOSAL GUIDELINES In order to advance the overall sustainability of UNBC as an institution a "UNBC Green Fund" has been created from UNBC parking revenues. Green research and project proposals are accepted by the Green University

  14. Guidelines for identifying suspect/counterfeit material

    SciTech Connect (OSTI)

    NONE

    1995-09-01T23:59:59.000Z

    These guidelines are intended to assist users of products in identifying: substandard, misrepresented, or fraudulently marked items. The guidelines provide information about such topics as: precautions, inspection and testing, dispositioning identified items, installed inspection and reporting suspect/counterfeit materials. These guidelines apply to users who are developing procurement documents, product acceptance/verification methods, company procedures, work instructions, etc. The intent of these SM guidelines in relation to the Quality Assurance Program Description (QAPD) and implementing company Management Control Procedures is not to substitute or replace existing requirements, as defined in either the QAPD or company implementing instructions (Management Control Procedures). Instead, the guidelines are intended to provide a consolidated source of information addressing the issue of Suspect/Counterfeit materials. These guidelines provide an extensive suspect component listing and suspect indications listing. Users can quickly check their suspect items against the list of manufacturers products (i.e., type, LD. number, and nameplate information) by consulting either of these listings.

  15. ASHRAE's Proposed Guideline 14P for Measurement of Energy and Demand Savings: How to Determine What Was Really Saved by the Retrofit

    E-Print Network [OSTI]

    Haberl, J. S.; Reeves, G.; Gillespie, K.; Claridge, D. E.; Cowan, J.; Culp, C.; Frazell, W.; Heinemeier, K.; Kromer, S.; Kummer, J.; Mazzucchi, R.; Reddy, A.; Schiller, S.; Sud, I.; Wolpert, J.; Wutka, T.

    2001-01-01T23:59:59.000Z

    ASHRAE has recently completed the development of Guideline 14 to fill a need for a standard set of energy (and demand) savings calculation procedures. Guideline 14 is intended to be a guideline that provides a minimum acceptable level of performance...

  16. Postdoctoral program guidelines.

    SciTech Connect (OSTI)

    Teich-McGoldrick, Stephanie; Miller, Andrew W.; Sava, Dorina Florentina; Liu, Yanli; Ferreira, Summer Rhodes; Biedermann, Laura Butler; Cruz-Campa, Jose Luis; Hall, Lisa Michelle; Liu, Xiaohua H.; Ekoto, Isaac

    2012-04-01T23:59:59.000Z

    We, the Postdoc Professional Development Program (PD2P) leadership team, wrote these postdoc guidelines to be a starting point for communication between new postdocs, their staff mentors, and their managers. These guidelines detail expectations and responsibilities of the three parties, as well as list relevant contacts. The purpose of the Postdoc Program is to bring in talented, creative people who enrich Sandia's environment by performing innovative R&D, as well as by stimulating intellectual curiosity and learning. Postdocs are temporary employees who come to Sandia for career development and advancement reasons. In general, the postdoc term is 1 year, renewable up to five times for a total of six years. However, center practices may vary; check with your manager. At term, a postdoc may apply for a staff position at Sandia or choose to move to university, industry or another lab. It is our vision that those who leave become long-term collaborators and advocates whose relationships with Sandia have a positive effect upon our national constituency.

  17. Author Guidelines

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOnItem NotEnergy,ARMForms About BecomeTechnologiesVehicleAuthor Guidelines Author

  18. Guidelines for Applicants For Academic Positions

    E-Print Network [OSTI]

    HR27 1008 Guidelines for Applicants For Academic Positions In assessing applications for academic; review articles in books or journals of recognised international standing; invitations to address the application. Normally this should not be more than five pages long. · Academic and Professional Leadership

  19. Vacuum Systems Consensus Guideline for Department of Energy Accelerator Laboratories

    SciTech Connect (OSTI)

    Casey,R.; Haas, E.; Hseuh, H-C.; Kane, S.; Lessard, E.; Sharma, S.; Collins, J.; Toter, W. F.; Olis, D. R.; Pushka, D. R.; Ladd, P.; Jobe, R. K.

    2008-09-09T23:59:59.000Z

    Vacuum vessels, including evacuated chambers and insulated jacketed dewars, can pose a potential hazard to equipment and personnel from collapse, rupture due to back-fill pressurization, or implosion due to vacuum window failure. It is therefore important to design and operate vacuum systems in accordance with applicable and sound engineering principles. 10 CFR 851 defines requirements for pressure systems that also apply to vacuum vessels subject to back-fill pressurization. Such vacuum vessels are potentially subject to the requirements of the American Society of Mechanical Engineers (ASME) Pressure Vessel Code Section VIII (hereafter referred to as the 'Code'). However, the scope of the Code excludes vessels with internal or external operating pressure that do not exceed 15 pounds per square inch gauge (psig). Therefore, the requirements of the Code do not apply to vacuum systems provided that adequate pressure relief assures that the maximum internal pressure within the vacuum vessel is limited to less than 15 psig from all credible pressure sources, including failure scenarios. Vacuum vessels that cannot be protected from pressurization exceeding 15 psig are subject to the requirements of the Code. 10 CFR 851, Appendix A, Part 4, Pressure Safety, Section C addresses vacuum system requirements for such cases as follows: (c) When national consensus codes are not applicable (because of pressure range, vessel geometry, use of special materials, etc.), contractors must implement measures to provide equivalent protection and ensure a level of safety greater than or equal to the level of protection afforded by the ASME or applicable state or local code. Measures must include the following: (1) Design drawings, sketches, and calculations must be reviewed and approved by a qualified independent design professional (i.e., professional engineer). Documented organizational peer review is acceptable. (2) Qualified personnel must be used to perform examinations and inspections of materials, in-process fabrications, non-destructive tests, and acceptance test. (3) Documentation, traceability, and accountability must be maintained for each unique pressure vessel or system, including descriptions of design, pressure conditions, testing, inspection, operation, repair, and maintenance. The purpose of this guideline is to establish a set of expectations and recommendations which will satisfy the requirements for vacuum vessels in general and particularly when an equivalent level of safety as required by 10 CFR 851 must be provided. It should be noted that these guidelines are not binding on DOE Accelerator Laboratories and that other approaches may be equally acceptable in addressing the Part 851 requirements.

  20. California Energy Commission GUIDELINES

    E-Print Network [OSTI]

    , electricity generation, photovoltaic, PV, PV Calculator, energy efficiency, guidelines, eligibilityCalifornia Energy Commission GUIDELINES GUIDELINES FOR CALIFORNIA'S SOLAR-300-2012-008-ED5-CMF CALIFORNIA ENERGY COMMISSION Edmund G. Brown Jr., Governor

  1. California Energy Commission GUIDELINES

    E-Print Network [OSTI]

    , photovoltaic, PV, PV Calculator, energy efficiency, guidelines, eligibility criteria, conditionsCalifornia Energy Commission GUIDELINES GUIDELINES FOR CALIFORNIA'S SOLAR ELECTRIC INCENTIVE PROGRAMS (SENATE BILL 1) Fourth Edition CALIFORNIA ENERGY COMMISSION Edmund G. Brown, Jr., Governor

  2. California Energy Commission GUIDELINES

    E-Print Network [OSTI]

    , electricity generation, photovoltaic, PV, PV Calculator, energy efficiency, guidelines, eligibility criteriaCalifornia Energy Commission GUIDELINES GUIDELINES FOR CALIFORNIA'S SOLAR ELECTRIC INCENTIVE PROGRAMS (SENATE BILL 1) Third Edition JUNE 2010 CEC3002010004CMF #12;CALIFORNIA ENERGY COMMISSION

  3. NACE Principles for Employment Professionals 1. Employment professionals will refrain from any practice that improperly influences and affects job

    E-Print Network [OSTI]

    Asaithambi, Asai

    NACE Principles for Employment Professionals 1. Employment professionals will refrain from any pressure for acceptance of employment offers and encouragement of revocation of another employment offer. Employment professionals will strive to communicate decisions to candidates within the agreed-upon time frame

  4. Hanford Site Solid Waste Acceptance Criteria

    SciTech Connect (OSTI)

    Not Available

    1993-11-17T23:59:59.000Z

    This manual defines the Hanford Site radioactive, hazardous, and sanitary solid waste acceptance criteria. Criteria in the manual represent a guide for meeting state and federal regulations; DOE Orders; Hanford Site requirements; and other rules, regulations, guidelines, and standards as they apply to acceptance of radioactive and hazardous solid waste at the Hanford Site. It is not the intent of this manual to be all inclusive of the regulations; rather, it is intended that the manual provide the waste generator with only the requirements that waste must meet in order to be accepted at Hanford Site TSD facilities.

  5. School Counseling Intern Handbook Internship Manual and Professional Practice

    E-Print Network [OSTI]

    School Counseling Intern Handbook Internship Manual and Professional Practice Portfolio Guidelines Compiled by Rolla E. Lewis, Ed.D., NCC School Counseling Coordinator Edited and Revised by Guinevere Reeves and Sarah Berch Professional School Counseling Interns Portland State University Counselor Education Program

  6. ABSTRACT & DISSERTATION FORMAT GUIDELINES

    E-Print Network [OSTI]

    Lu, Yi

    2 ABSTRACT & DISSERTATION FORMAT GUIDELINES The Knowledge Navigation Center (second floor these guidelines. The most up-to-date version of the Abstract and Dissertation Format Guidelines is available;2 Abstract Format Guidelines ABSTRACT Title of the Dissertation by by Student's Name Chair: Chair's name Text

  7. Guidelines for the implementation of the Conflict of Interest Policy

    E-Print Network [OSTI]

    Department, HR

    2015-01-01T23:59:59.000Z

    In the performance of their professional duties for the Organization, CERN contributors shall not accept gifts, favours or hospitality for: ? themselves; ? their family or friends; or, ? any individual or organisation with which they are directly or indirectly connected.

  8. Appendix C: DOE Super-ESPC Project Acceptance Guidelines and...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    and always over a period of months). Inspection, start-up, testing, and commissioning. All ECMs are inspected, brought on line, tested, and commissioned interactively...

  9. Guidelines, Checklist, and Contract Clauses for Government Acceptance of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't YourTransport(Fact Sheet), GeothermalGrid Integration0-1 March 2013EnergyFOR SELECTINGESPC

  10. Home Energy Professional Certifications (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2012-11-01T23:59:59.000Z

    As the weatherization and home energy upgrade industries expand and gain recognition, the need for a qualified workforce becomes more apparent. The certification component of the Guidelines project was designed to create meaningful and lasting careers for weatherization workers. Intended for experienced home energy professionals, the four new certifications focus on the most common jobs in the industry: energy auditor, retrofit installer technician, crew leader, and quality control inspector.

  11. Measure Guideline: Internal Insulation of Masonry Walls

    SciTech Connect (OSTI)

    Straube, J. F.; Ueno, K.; Schumacher, C. J.

    2012-07-01T23:59:59.000Z

    This measure guideline provides recommendations for interior insulation assemblies that control interstitial condensation and durability risks; recommendations for acceptable thermal performance are also provided. An illustrated guide of high-risk exterior details (which concentrate bulk water), and recommended remediation details is provided. This is followed by a recommended methodology for risk assessment of a masonry interior insulation project: a series of steps are suggested to assess the risks associated with this retrofit, with greater certainty with added steps.

  12. Professional Training Information Pack

    E-Print Network [OSTI]

    Davies, Christopher

    Intending Professional Training Students Year 2 Information Pack #12;- 1 - Applying for a Professional Training Placement To be allowed to do the Professional Training you must have enrolled on one must talk to Dr J. M. Thompson immediately. General introduction to professional training Students

  13. Medical School Acceptance Summary PreProfessional Advising Office

    E-Print Network [OSTI]

    Feschotte, Cedric

    process gas residues. The gases used on this system are N2, O2, Ar, He, C4F8, SF6, CF4, CHF3, Propane/Process Data Ptherm SF6 Etch Rate Test for Silicon Material All etches performed on 4-inch ~100% open area (usually SF6) is flowed for a short time, then a `passivation gas' (C4F8) is flowed to coat and protect

  14. Conservation and solar guidelines

    SciTech Connect (OSTI)

    Balcomb, J.D.

    1986-01-01T23:59:59.000Z

    Guidelines are given for selecting R-values and infiltration levels, and determining the size of the solar collection area for passive solar buildings. The guidelines are based on balancing the incremental cost/benefit of conservation and passive solar strategies. Tables are given for 90 cities in the United States and the results are also displayed on maps. The procedures are developed in an appendix, which gives the cost assumptions used and explains how to develop different guidelines for different costs.

  15. Guidelines for writing homework

    E-Print Network [OSTI]

    GUIDELINES FOR WRITTEN HOMEWORK. 1. Tan Punross or wmrrnn uomzwoax. The purpose of written homework in this course is to develop your skills in ...

  16. GESDOR A Generic Execution Model for Sharing of Computer-Interpretable Clinical Practice Guidelines

    E-Print Network [OSTI]

    Peleg, Mor

    Guideline Cough Guideline Breast Cancer Guideline Hypertension Guideline GLIF PROforma Guideline Instances

  17. Measure Guideline: Ventilation Cooling

    SciTech Connect (OSTI)

    Springer, D.; Dakin, B.; German, A.

    2012-04-01T23:59:59.000Z

    The purpose of this measure guideline on ventilation cooling is to provide information on a cost-effective solution for reducing cooling system energy and demand in homes located in hot-dry and cold-dry climates. This guideline provides a prescriptive approach that outlines qualification criteria, selection considerations, and design and installation procedures.

  18. Internship Guidelines Adopted 2001

    E-Print Network [OSTI]

    Selmic, Sandra

    Internship Guidelines Adopted 2001 Revised February 2004 Revised March 15, 2007 Page 1 of 5 INTERNSHIP GUIDELINES College of Business Louisiana Tech University The University supports an experiential an internship course(s) that students may apply as credit toward their academic degrees. The internship must

  19. GUIDELINES: KEEPING GOOD

    E-Print Network [OSTI]

    Fainman, Yeshaiahu

    GUIDELINES: KEEPING GOOD RESEARCH LAB NOTEBOOKSUC San Diego's Technology Transfer Office (TTO to university policies and guidelines thereby providing incentives for the generation of new innovations and initials. · Consider the possibility of theft, damage, or loss of logbook and take appropriate measure (e

  20. Native Vegetation Planting Guidelines

    E-Print Network [OSTI]

    Wang, Yan

    1 Native Vegetation Planting Guidelines Based on Sustainability Goals for the Macquarie Campus #12.................................................................................................................................10 4.2.5 Shale-Sandstone soil transition...................................................................................................................................11 #12;3 1. Purpose This document provides a guideline for specific grounds management procedures

  1. Conservation and solar guidelines

    SciTech Connect (OSTI)

    Balcomb, J.D.

    1983-01-01T23:59:59.000Z

    Guidelines are given for selecting R-values and infiltration levels, and determining the size of the solar collection area for passive solar buildings. The guidelines are based on balancing the incremental cost/benefit of conservation and passive solar strategies. Tables are given for 90 cities in the US and the results are also displayed on maps. An example is included.

  2. Guidelines for Home Energy Professionals Project (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2012-11-01T23:59:59.000Z

    The U.S. Department of Energy and the home energy upgrade industry collaborate to define high-quality work and develop highly qualified workers.

  3. Webinar: DOE Guidelines for Home Energy Professionals | Department of

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOn AprilA group currentBradley Nickell DirectorThe& Federal EnergyEnergy 7, 2015

  4. Guidelines for Home Energy Professionals | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33Frequently20,000 RussianBy: Thomas P. D'Agostino,Glen WattmanInvestigationsandGridTheNEPAThe U.S.

  5. Guidelines for Home Energy Professionals | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33Frequently20,000 RussianBy: Thomas P. D'Agostino,Glen WattmanInvestigationsandGridTheNEPAThe

  6. Guidelines for Home Energy Professionals Accredited Training | Department

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directed offOCHCO2: FinalOffers3.pdf0-45.pdf0 BudgetGoals andSenatethe Publicof Energy Accredited

  7. Guidelines for Home Energy Professionals Certifications | Department of

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directed offOCHCO2: FinalOffers3.pdf0-45.pdf0 BudgetGoals andSenatethe Publicof Energy

  8. Guidelines for Home Energy Professionals Project Updates | Department of

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directed offOCHCO2: FinalOffers3.pdf0-45.pdf0 BudgetGoals andSenatethe PublicofEnergy Project Updates

  9. Guidelines for Home Energy Professionals Standard Work Specifications |

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directed offOCHCO2: FinalOffers3.pdf0-45.pdf0 BudgetGoals andSenatethe PublicofEnergy Project

  10. Guidelines for Home Energy Professionals Prezi Presentation | Department of

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742Energy ChinaofSchaefer To: CongestionDevelopment ofofthePerformance Requirements ofEnergy The

  11. Guidelines for Home Energy Professionals: Request for Information |

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742Energy ChinaofSchaefer To: CongestionDevelopment ofofthePerformance Requirements

  12. About the Guidelines for Home Energy Professionals Project | Department of

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directed off Energy.gov. Are you0 ARRA Newsletters 20103-03 AUDIT REPORT: OAS-L-03-03About

  13. Guidelines for Home Energy Professionals Project Fact Sheet | Department of

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directed off Energy.gov.Energy02.pdf7 OPAM Flash2011-37 OPAMResource Guide

  14. Guidelines for Home Energy Professionals Project: Benefits for Employers

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directed off Energy.gov.Energy02.pdf7 OPAM Flash2011-37 OPAMResource Guideand Contractors | Department of

  15. Guidelines for Home Energy Professionals Project: Benefits for Home Energy

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directed off Energy.gov.Energy02.pdf7 OPAM Flash2011-37 OPAMResource Guideand Contractors | Department

  16. Guidelines for Home Energy Professionals Project: Benefits for Homeowners

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directed off Energy.gov.Energy02.pdf7 OPAM Flash2011-37 OPAMResource Guideand Contractors | Departmentand

  17. Guidelines for Home Energy Professionals Project: Benefits for Training

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directed off Energy.gov.Energy02.pdf7 OPAM Flash2011-37 OPAMResource Guideand Contractors |

  18. Guidelines for Home Energy Professionals Project: Benefits for Utilities

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directed off Energy.gov.Energy02.pdf7 OPAM Flash2011-37 OPAMResource Guideand Contractors |and Efficiency

  19. Professional Education Dissertation Prize

    E-Print Network [OSTI]

    Firestone, Jeremy

    Graduate & Professional Education Dissertation Prize 2014-2015 nomination Form The Office of Graduate and Professional Education invites nominations for the Outstanding Doctoral Dissertation Prize from the department chairperson for doctoral students who complete their dissertation in the term

  20. Module 10: Maintenance and Fueling Guidelines

    Broader source: Energy.gov [DOE]

    This course covers safety guidelines for hydrogen, safe maintenance facilities, safety guidelines for hydrogen fueling facilities

  1. Guidelines for Home Energy Professionals Project (Fact Sheet), Guidelines For Home Energy Professionals, Energy Efficiency & Renewable Energy (EERE)

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742Energy ChinaofSchaefer To: CongestionDevelopment ofofthePerformance Requirements ofEnergy

  2. Programming Guidelines for FBD programs in Reactor Protection

    E-Print Network [OSTI]

    Programming Guidelines for FBD programs in Reactor Protection System Sejin Jung, Dong-Ah Lee, Eui Diagram) to design software ­ It used PLC (Programmable Logic Controller) programming language in plant for the Use of Function Block Diagram in Reactor Protection Systems, accepted APSEC 2014 Research2

  3. Electrical safety guidelines

    SciTech Connect (OSTI)

    Not Available

    1993-09-01T23:59:59.000Z

    The Electrical Safety Guidelines prescribes the DOE safety standards for DOE field offices or facilities involved in the use of electrical energy. It has been prepared to provide a uniform set of electrical safety standards and guidance for DOE installations in order to affect a reduction or elimination of risks associated with the use of electrical energy. The objectives of these guidelines are to enhance electrical safety awareness and mitigate electrical hazards to employees, the public, and the environment.

  4. Guidelines for developing certification programs for newly generated TRU waste

    SciTech Connect (OSTI)

    Whitty, W.J.; Ostenak, C.A.; Pillay, K.K.S.; Geoffrion, R.R.

    1983-05-01T23:59:59.000Z

    These guidelines were prepared with direction from the US Department of Energy (DOE) Transuranic (TRU) Waste Management Program in support of the DOE effort to certify that newly generated TRU wastes meet the Waste Isolation Pilot Plant (WIPP) Waste Acceptance Criteria. The guidelines provide instructions for generic Certification Program preparation for TRU-waste generators preparing site-specific Certification Programs in response to WIPP requirements. The guidelines address all major aspects of a Certification Program that are necessary to satisfy the WIPP Waste Acceptance Criteria and their associated Compliance Requirements and Certification Quality Assurance Requirements. The details of the major element of a Certification Program, namely, the Certification Plan, are described. The Certification Plan relies on supporting data and control documentation to provide a traceable, auditable account of certification activities. Examples of specific parts of the Certification Plan illustrate the recommended degree of detail. Also, a brief description of generic waste processes related to certification activities is included.

  5. Algorithms for builder guidelines

    SciTech Connect (OSTI)

    Balcomb, J.D.; Lekov, A.B.

    1989-06-01T23:59:59.000Z

    The Builder Guidelines are designed to make simple, appropriate guidelines available to builders for their specific localities. Builders may select from passive solar and conservation strategies with different performance potentials. They can then compare the calculated results for their particular house design with a typical house in the same location. Algorithms used to develop the Builder Guidelines are described. The main algorithms used are the monthly solar ratio (SLR) method for winter heating, the diurnal heat capacity (DHC) method for temperature swing, and a new simplified calculation method (McCool) for summer cooling. This paper applies the algorithms to estimate the performance potential of passive solar strategies, and the annual heating and cooling loads of various combinations of conservation and passive solar strategies. The basis of the McCool method is described. All three methods are implemented in a microcomputer program used to generate the guideline numbers. Guidelines for Denver, Colorado, are used to illustrate the results. The structure of the guidelines and worksheet booklets are also presented. 5 refs., 3 tabs.

  6. Acceptable NSLS Safety Documentation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Acceptable NSLS Safety Documentation Print NSLS users who have completed NSLS Safety Module must present a copy of one of the following documents to receive ALS 1001: Safety at the...

  7. Advanced lighting guidelines: 1993. Final report

    SciTech Connect (OSTI)

    Eley, C.; Tolen, T.M. [Eley Associates, San Francisco, CA (United States); Benya, J.R. [Luminae Souter Lighting Design, San Francisco, CA (United States); Rubinstein, F.; Verderber, R. [Lawrence Berkeley Lab., CA (United States)

    1993-12-31T23:59:59.000Z

    The 1993 Advanced Lighting Guidelines document consists of twelve guidelines that provide an overview of specific lighting technologies and design application techniques utilizing energy-efficient lighting practice. Lighting Design Practice assesses energy-efficient lighting strategies, discusses lighting issues, and explains how to obtain quality lighting design and consulting services. Luminaires and Lighting Systems surveys luminaire equipment designed to take advantage of advanced technology lamp products and includes performance tables that allow for accurate estimation of luminaire light output and power input. The additional ten guidelines -- Computer-Aided Lighting Design, Energy-Efficient Fluorescent Ballasts, Full-Size Fluorescent Lamps, Compact Fluorescent Lamps, Tungsten-Halogen Lamps, Metal Halide and HPS Lamps, Daylighting and Lumen Maintenance, Occupant Sensors, Time Scheduling Systems, and Retrofit Control Technologies -- each provide a product technology overview, discuss current products on the lighting equipment market, and provide application techniques. This document is intended for use by electric utility personnel involved in lighting programs, lighting designers, electrical engineers, architects, lighting manufacturers` representatives, and other lighting professionals.

  8. Strategy Guideline: Demonstration Home

    SciTech Connect (OSTI)

    Savage, C.; Hunt, A.

    2012-12-01T23:59:59.000Z

    This guideline will provide a general overview of the different kinds of demonstration home projects, a basic understanding of the different roles and responsibilities involved in the successful completion of a demonstration home, and an introduction into some of the lessons learned from actual demonstration home projects. Also, this guideline will specifically look at the communication methods employed during demonstration home projects. And lastly, we will focus on how to best create a communication plan for including an energy efficient message in a demonstration home project and carry that message to successful completion.

  9. EPRI condensate polisher guidelines

    SciTech Connect (OSTI)

    Larkin, B.A.; Webb, L.C.; Sawochka, S.G.; Crits, G.J.; Pocock, F.J.; Wirth, L.

    1995-01-01T23:59:59.000Z

    Cycle chemistry is one of the most important contributors to the loss of availability of generating units. Condensate polishing can significantly improve cycle chemistry by improving cycle water quality and minimizing the transport of contaminants in the power cycle. The EPRI-funded project described in this paper developed comprehensive guidelines for condensate polishing based upon information gathered from utility surveys, equipment vendors, and resin suppliers. Existing literature was also surveyed for pertinent input. Comprehensive guidelines which outline guidance for design, operation, maintenance, surveillance, management, and retrofitting of condensate polishing systems were developed. Economics of condensate polishing were evaluated and a roadmap for economic evaluation for utilities to follow was produced.

  10. ASHRAE's Guideline 14-2002 for Measurement of Energy and Demand Savings: How to Determine What Was Really Saved by the Retrofit

    E-Print Network [OSTI]

    Haberl, J. S.; Claridge, D. E.; Culp, C.

    2005-01-01T23:59:59.000Z

    developed standards for the laboratory measurement of temperature, pressure, airflow, liquid flow, power, thermal energy, and the testing standards for chillers, fans, pumps, motors, boilers, and furnaces. Guideline 14 also relied on the previous work... Guideline 14-2002 to fill a need for a standard set of energy (and demand) savings calculation procedures. Guideline 14-2002 is intended to be a guideline that provides a minimum acceptable level of performance in the measurement of energy and demand...

  11. Author Submission Guidelines 6/2007 Publication Submission Guidelines

    E-Print Network [OSTI]

    Collins, Gary S.

    Author Submission Guidelines 6/2007 Publication Submission Guidelines Things to think about when and Printing department uses the The Chicago Manual of Style guidelines for editing purposes. Submit text sentences and after colons · Tab to indent items in a vertical list · Use the indent feature to set off

  12. Acceptance test procedure for High Pressure Water Jet System

    SciTech Connect (OSTI)

    Crystal, J.B.

    1995-05-30T23:59:59.000Z

    The overall objective of the acceptance test is to demonstrate a combined system. This includes associated tools and equipment necessary to perform cleaning in the 105 K East Basin (KE) for achieving optimum reduction in the level of contamination/dose rate on canisters prior to removal from the KE Basin and subsequent packaging for disposal. Acceptance tests shall include necessary hardware to achieve acceptance of the cleaning phase of canisters. This acceptance test procedure will define the acceptance testing criteria of the high pressure water jet cleaning fixture. The focus of this procedure will be to provide guidelines and instructions to control, evaluate and document the acceptance testing for cleaning effectiveness and method(s) of removing the contaminated surface layer from the canister presently identified in KE Basin. Additionally, the desired result of the acceptance test will be to deliver to K Basins a thoroughly tested and proven system for underwater decontamination and dose reduction. This report discusses the acceptance test procedure for the High Pressure Water Jet.

  13. Guidelines for Performance-

    E-Print Network [OSTI]

    Alvarez-Cohen, Lisa

    with present prescriptive Building Code provisions. Earthquake engineering is a rapidly developing field be modified.Individual engineers and building officials implementing these Guidelines must exercise their own of buildings contained in standards such as ASCE 7 and the International Building Code (IBC). They are intended

  14. International Development Internship Program This is the official APPLICATION GUIDELINE AND FORM that must be submitted no later than

    E-Print Network [OSTI]

    Carter, John

    International Development Internship Program This is the official APPLICATION GUIDELINE must pass a conversation language test to determine your eligibility and internship placement. 5, housing, and health insurance during the internship, and air transportation. If accepted to the IDIP

  15. Software Quality Assurance Subcommittee : Guidelines for Requirements...

    Broader source: Energy.gov (indexed) [DOE]

    Software Quality Assurance Subcommittee : Guidelines for Requirements Management Software Quality Assurance Subcommittee : Guidelines for Requirements Management Requirements...

  16. Nonresident Alien Professional Services Contract

    E-Print Network [OSTI]

    Liu, Taosheng

    Nonresident Alien Professional Services Contract (This Contract form should be completed before Services: #12;Nonresident Alien Professional Services Contract Michigan State University is an affirmative

  17. "Educating transportation professionals."

    E-Print Network [OSTI]

    Acton, Scott

    "Educating transportation professionals." Michael Demetsky Henry L. Kinnier Professor mjd of Virginia Charlottesville, VA 434.924.7464 Transportation Engineering & Management Research Our group works closely with the Virginia Center for Transportation Innovation and Research (VCTIR), located

  18. Measure Guideline: Evaporative Condensers

    SciTech Connect (OSTI)

    German, A.; Dakin, B.; Hoeschele, M.

    2012-03-01T23:59:59.000Z

    The purpose of this measure guideline on evaporative condensers is to provide information on a cost-effective solution for energy and demand savings in homes with cooling loads. This is a prescriptive approach that outlines selection criteria, design and installation procedures, and operation and maintenance best practices. This document has been prepared to provide a process for properly designing, installing, and maintaining evaporative condenser systems as well as understanding the benefits, costs, and tradeoffs.

  19. TORIS Data Preparation Guidelines

    SciTech Connect (OSTI)

    Guinn, H.; Remson, D.

    1999-03-11T23:59:59.000Z

    The objective of this manual is to present guidelines and procedures for the preparation of new data for the Tertiary Oil Recovery Information System (TORIS) data base. TORIS is an analytical system currently maintained by the Department of Energy's (DOE) Bartlesville Project Office. It uses an extensive field- and reservoir-level data base to evaluate the technical and economic recovery potential of specific crude oil reservoirs.

  20. Safeguards Professional Development Opportunities

    SciTech Connect (OSTI)

    Gilligan, Kimberly V [ORNL

    2010-01-01T23:59:59.000Z

    Across the international field of safeguards there has been a rising awareness of the need for development of the next generation of safeguards professionals. The 2010 International Atomic Energy Agency Safeguards Symposium includes a suggested topic of 'developing safeguards professionals.' This can first be addressed by making university students and young professionals aware of safeguards and the unique career opportunities it encompasses. Then, once someone decides to go into safeguards he/she needs to be offered professional development opportunities in order to become a more effective member of the international safeguards community. This paper begins to do that by reviewing opportunities currently available. There are not many opportunities that are well advertised and this paper will serve to raise awareness of what does already exist and therefore benefit the international safeguards community. The current opportunities that will be discussed include training programs, graduate degrees, organizational outreach, professional networks, and intensive topic specific programs. The paper will also identify current needs and holes in the current offerings of professional development opportunities and suggest ways they can be filled. In the conclusion the paper addresses what types of programs are still needed.

  1. Professional Skills Program Course Catalog

    Broader source: Energy.gov [DOE]

    This Catalog lists all DOE training courses offered through the Professional Skills and Technical Training Programs.

  2. Guidelines for the Mentor Welcome to the Penn State Engineering Alumni Society Mentor Program!

    E-Print Network [OSTI]

    Yener, Aylin

    Guidelines for the Mentor Welcome to the Penn State Engineering Alumni Society Mentor Program! The Penn State Engineering Alumni Society mentor program facilitates a onetoone relationship between's professional development. THE ROLE OF A MENTOR Mentors serve many purposes. During the course of most mentor

  3. Guidelines for selecting a solar heating, cooling or hot water design

    SciTech Connect (OSTI)

    Kelly, C.J. Jr.

    1981-12-01T23:59:59.000Z

    Guidelines are presented for the professional who may have to choose between competing solar heating and cooling designs for buildings. The experience of the National Solar Data Network in monitoring over 100 solar installations are drawn upon. Three basic principles and a design selection checklist are developed which will aid in choosing the most cost effective design.

  4. APS Safety Guidelines for Beamlines

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Safety Guidelines for Beamlines Accident Investigations LOM Shop Usage User Shop Access - Policies and Procedures User Shop Orientation User Shop Authorization Certification Form...

  5. APS Guideline for Accident Investigations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    APS Guideline for Accident Investigations Introduction Purpose The primary purpose of an incident or accident investigation is to identify the hazard control systems that either...

  6. Guideline for PhD candidates of the Graduate School of Excellence with foreign certificates as well as for supervisors

    E-Print Network [OSTI]

    Kaus, Boris

    Guideline for PhD candidates of the Graduate School of Excellence with foreign certificates as well. Acceptance as a PhD Candidate by the Department Concerned · Which form is required? The application form for acceptance as a PhD candidate, which must be signed by the supervisor of the doctoral thesis. The duly signed

  7. Web Content Filtering 1 User Guidelines Web content filter guidelines

    E-Print Network [OSTI]

    Web Content Filtering 1 User Guidelines Web content filter guidelines Introduction The basic criterion for blocking a Web page Categories of material which will be blocked Requesting the unblocking of Aberdeen applies a Web Content Filtering service to all web pages accessed from the undergraduate network

  8. Appendix 3 Document Scanning Guidelines Appendix 3 Document Scanning Guidelines

    E-Print Network [OSTI]

    Tsien, Roger Y.

    Appendix 3 Document Scanning Guidelines App.3-1 Appendix 3 ­ Document Scanning Guidelines 1. Turn. Note: Whenever possible, it is best to convert a Word document into a PDF than to scan a document and convert it to a PDF. A Word document that has been converted is searchable; a scanned document is not. 2

  9. Logo guidelines University of East Anglia London Logo guidelines

    E-Print Network [OSTI]

    Feigon, Brooke

    Logo guidelines 09.2009 #12;University of East Anglia London Logo guidelines 1 Design Philosophy to reflect the unique nature of the Study Centre. Reproduction of the logo with the word `LONDON and within the logo graphically, by the parent institution. These design elements establish a powerful

  10. Cost analysis guidelines

    SciTech Connect (OSTI)

    Strait, R.S.

    1996-01-10T23:59:59.000Z

    The first phase of the Depleted Uranium Hexafluoride Management Program (Program)--management strategy selection--consists of several program elements: Technology Assessment, Engineering Analysis, Cost Analysis, and preparation of an Environmental Impact Statement (EIS). Cost Analysis will estimate the life-cycle costs associated with each of the long-term management strategy alternatives for depleted uranium hexafluoride (UF6). The scope of Cost Analysis will include all major expenditures, from the planning and design stages through decontamination and decommissioning. The costs will be estimated at a scoping or preconceptual design level and are intended to assist decision makers in comparing alternatives for further consideration. They will not be absolute costs or bid-document costs. The purpose of the Cost Analysis Guidelines is to establish a consistent approach to analyzing of cost alternatives for managing Department of Energy`s (DOE`s) stocks of depleted uranium hexafluoride (DUF6). The component modules that make up the DUF6 management program differ substantially in operational maintenance, process-options, requirements for R and D, equipment, facilities, regulatory compliance, (O and M), and operations risk. To facilitate a consistent and equitable comparison of costs, the guidelines offer common definitions, assumptions or basis, and limitations integrated with a standard approach to the analysis. Further, the goal is to evaluate total net life-cycle costs and display them in a way that gives DOE the capability to evaluate a variety of overall DUF6 management strategies, including commercial potential. The cost estimates reflect the preconceptual level of the designs. They will be appropriate for distinguishing among management strategies.

  11. EV Guideline Assessment Templates | Department of Energy

    Energy Savers [EERE]

    EV Guideline Assessment Templates More Documents & Publications EV Guideline Assessment Templates NDIAPMSCEVMSIntentGuideNov2006.pdf Earned Value Management System RM...

  12. University of Massachusetts Amherst Measurement & Verification Guidelines

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    University of Massachusetts Amherst Measurement & Verification Guidelines & Template Plan 11 ..............................................................................................................1 UMASS AMHERST MEASUREMENT & VERIFICATION (M&V) GUIDELINES ..........3 PREFACE ....................................................................................................................................................................3 BENEFITS OF MEASUREMENT & VERIFICATION

  13. Keep Communication Professional BASIC TIPS

    E-Print Network [OSTI]

    Gering, Jon C.

    Keep Communication Professional BASIC TIPS: Staying professional in your career is vital. You the way through your career until you retire. It's important to not become too casual when communicating with employers or other professionals while seeking an internship/co-op. Don't use slang when communicating

  14. University of Houston Campus Design Guidelines and Standards

    E-Print Network [OSTI]

    Azevedo, Ricardo

    · Furnishings · Lighting 7.0 ENVIRONMENTALLY RESPONSIBLE DESIGN GUIDELINES 8.0 SPACE GUIDELINES · Introduction

  15. Guidelines for Retrofit Performance Monitoring

    E-Print Network [OSTI]

    Ternes, M. P.

    1987-01-01T23:59:59.000Z

    the collection of data (more detailed than billing data) that are needed to fully understand retrofit energy performance. The guideline identifies the important data parameters that should be collected to meet this need and defines the data parameters to ensure...

  16. Disability Housing Accommodations Procedures & Guidelines

    E-Print Network [OSTI]

    Heller, Barbara

    Disability Housing Accommodations Procedures & Guidelines In compliance with Section 504 reasonable accommodations to students with disabilities in housing. According to the ADA, a disability to live in IIT's traditional housing arrangements, accommodations are provided. Housing accommodations

  17. Guidelines for water use. Manual

    SciTech Connect (OSTI)

    Crook, J.; Ammerman, D.

    1992-09-01T23:59:59.000Z

    The manual is a valuable tool for regulatory agencies at all levels of government, engineers, planners, and all other groups affected by water reuse problems. Key water reuse planning issues are identified and discussed in a manner that librally employs case study experience to illustrate the importance of each issue and successful solutions. A comprehensive listing of state water reuse guidelines by category of reuse is provided, along with an analysis of the variations between states within each category. The analysis is then followed with a series of suggested guidelines for water quality required for each category of reuse. These guidelines are based on the state guidelines and experience described earlier, and they offer a suggested starting point for state, regional, and local governments that plan to establish water reuse procedures, both in terms of water quality requirements and procedures for design, operation, and monitoring.

  18. ADVANCE! Leadership Experience Project Guidelines

    E-Print Network [OSTI]

    Hone, James

    ADVANCE! Leadership Experience Project Guidelines Fieldwork Practicum Description: The fieldwork component of the ADVANCE! leadership program offers students the opportunity to integrate theory exposure to that industry. Together, they design a leadership project in which the student takes an active

  19. Exposure guidelines for magnetic fields

    SciTech Connect (OSTI)

    Miller, G.

    1987-12-01T23:59:59.000Z

    The powerful magnetic fields produced by a controlled fusion experiment at Lawrence Livermore National Laboratory (LLNL) necessitated the development of personnel-exposure guidelines for steady magnetic fields. A literature search and conversations with active researchers showed that it is currently possible to develop preliminary exposure guidelines for steady magnetic fields. An overview of the results of past research into the bioeffects of magnetic fields was compiled, along with a discussion of hazards that may be encountered by people with sickle-cell anemia or medical electronic and prosthetic implants. The LLNL steady magnetic-field exposure guidelines along with a review of developments concerning the safety of time-varying fields were also presented in this compilation. Guidelines developed elsewhere for time varying fields were also given. Further research is needed to develop exposure standards for both steady or time-varying fields.

  20. Measure Guideline: Basement Insulation Basics

    SciTech Connect (OSTI)

    Aldrich, R.; Mantha, P.; Puttagunta, S.

    2012-10-01T23:59:59.000Z

    This guideline is intended to describe good practices for insulating basements in new and existing homes, and is intended to be a practical resources for building contractors, designers, and also to homeowners.

  1. January 31, 2011 In some instances, Chicago guidelines are different from those required for NPS theses,

    E-Print Network [OSTI]

    January 31, 2011 In some instances, Chicago guidelines are different from those required for NPS to allow for very concise note citations. N = Note (footnote). 10 pt. font is acceptable. Indent first = Bibliography. Set the first line flush left and indent subsequent lines (called a hanging indent). Single space

  2. Guidelines Graduate Curriculum Revised 07/09

    E-Print Network [OSTI]

    Tennessee, University of

    Guidelines ­ Graduate Curriculum Revised 07/09 2009-2010 Guidelines FOR THE SUBMISSION OF CURRICULAR MATERIALS TO THE GRADUATE COUNCIL The University of Tennessee, Knoxville #12;Guidelines ­ Graduate Curriculum Revised 07/09 Curricular Submission Guidelines on the Web at http://gradschool

  3. Small Wind Site Assessor Guidelines Document (Presentation)

    SciTech Connect (OSTI)

    Preus, R.

    2014-12-01T23:59:59.000Z

    Presentation on what the small wind site assessor guidelines document will cover and timeline for completion.

  4. Selection of low-risk design guidelines for energetic events

    SciTech Connect (OSTI)

    Ferguson, D.; Marchaterre, J.; Graham, J.

    1982-01-01T23:59:59.000Z

    This paper recommends the establishment of specific design guidelines for protection against potential, but low-probability, energetic events. These guidelines recognize the plant protective features incorporated to prevent such events, as well as the inherent capability of the plant to accommodate a certain level of energy release. Further, their application is recommended within the context of necessary standardized and agreed-upon acceptance criteria which are less restrictive than ASME code requirements. The paper provides the background upon which the selection of the design is made, including the characterization of energetic events dependent on various core-design parameters, and including the necessity of a low-risk design balanced between prevention of accidents and the mitigation of consequences.

  5. Bisfuel links - Professional organizations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625govInstrumentstdmadapInactiveVisiting the TWPSuccess Stories Site Map PrintablePresentationsProfessional

  6. Acceptable Documents for Identity Proofing

    Broader source: Energy.gov [DOE]

    It is a requirement that the identity of a DOE Digital Identity Subscriber be verified against acceptable identity source documents. A Subscriber must appear in person and present their Federal...

  7. Hanford Site Guidelines for Preparation and Presentation of Geologic Information

    SciTech Connect (OSTI)

    Lanigan, David C.; Last, George V.; Bjornstad, Bruce N.; Thorne, Paul D.; Webber, William D.

    2010-04-30T23:59:59.000Z

    A complex geology lies beneath the Hanford Site of southeastern Washington State. Within this geology is a challenging large-scale environmental cleanup project. Geologic and contaminant transport information generated by several U.S. Department of Energy contractors must be documented in geologic graphics clearly, consistently, and accurately. These graphics must then be disseminated in formats readily acceptable by general graphics and document producing software applications. The guidelines presented in this document are intended to facilitate consistent, defensible, geologic graphics and digital data/graphics sharing among the various Hanford Site agencies and contractors.

  8. Selection guidelines for central heat plant controls. Final report

    SciTech Connect (OSTI)

    Warner, S.R.; Lin, M.C.; Schandche, G.W.

    1994-11-01T23:59:59.000Z

    The operation and control of Central Heating Plants (CHPs) are important factors in maintaining the readiness of U.S. Army installations. Aging CHPs often experience increased interruptions, maintenance difficulties, and inefficient operation. As fuel costs increase, there is a growing need to take advantage of new, emerging control technologies. Microprocessor-based controls can provide opportunities for increased reliability, enhanced safety, better performance monitoring, and cost reduction. However, upgraded control systems cannot compensate for a boiler in poor mechanical condition. Any proposed control systems upgrade must be preceded by a mechanical assessment of the boiler. These CHP control guidelines can help installation personnel develop budgetary-cost proposals to upgrade gas/oil-fired boiler controls for gas/oil-fired steam or high temperature hot water (HTHW) systems. These general guidelines provide basic information to evaluate the feasibility of upgrading boiler control systems, and a methodology for developing budget proposals. Judgement is required to develop designs for specific unit and site characteristics, boiler safety codes, and local regulatory requirements. These guidelines do not eliminate the need for competent professional engineers to finalize assessments of existing conditions, to develop a plant control system design that meets existing and new requirements, and to evaluate alternative contractor proposals.

  9. Professional Certificate in Risk Management

    E-Print Network [OSTI]

    Carleton University

    Professional Certificate in Risk Management 2010 Program 3 Part-time Courses CRM01: Essentials of Risk Management ­ Next Session Fall 2010 CRM02: Risk Control ­ Jan. 12 - April 26, 2010 CRM03: Risk to apply for the Canadian Risk Management (CRM) designation. #12;Professional Certificate in Risk

  10. Technical Position, Regarding Acceptable Methods for Assessing...

    Office of Environmental Management (EM)

    Regarding Acceptable Methods for Assessing and Recording Radiation Doses to Individuals Technical Position, Regarding Acceptable Methods for Assessing and Recording Radiation Doses...

  11. SOFTWARE QUALITY & SYSTEMS ENGINEERING PROGRAM : Acceptance Checklist...

    Broader source: Energy.gov (indexed) [DOE]

    PROGRAM : Acceptance Checklist SOFTWARE QUALITY & SYSTEMS ENGINEERING PROGRAM : Acceptance Checklist The following checklist is intended to provide system owners, project managers,...

  12. Central Characterization Program (CCP) Acceptable Knowledge Documentat...

    Office of Environmental Management (EM)

    Acceptable Knowledge Documentation Central Characterization Program (CCP) Acceptable Knowledge Documentation This document was used to determine facts and conditions during the...

  13. ACCEPTANCE REQUIREMENTS AND HOME ENERGY RATING SYSTEMS

    E-Print Network [OSTI]

    ................................................................................................. NJ-5 NJ.6. Lighting Control Systems ........................................................................................................... NJ-6 NJ.6.1 Automatic Daylighting Controls Acceptance ........................................................................... NJ-9 NJ.6.4 Automatic Time Switch Control Acceptance

  14. Energy Department Accepting Small Business Grant Applications...

    Energy Savers [EERE]

    Energy Department Accepting Small Business Grant Applications for Large Wind Turbines Energy Department Accepting Small Business Grant Applications for Large Wind Turbines November...

  15. RETURNING TO THE U SCHOLARSHIP GUIDELINES

    E-Print Network [OSTI]

    Tipple, Brett

    -traditional student. Academic, professional, and personal goals 3. A Degree Audit Report (DARS) Scholarship

  16. Style and Usage Guidelines for Written Communications

    E-Print Network [OSTI]

    Rose, Michael R.

    Style and Usage Guidelines for Written Communications Administrative and Business Services #12 Construction Commas Capitalization and the "Uniqueness Rule" Selected Style Guidelines Apostrophes Colons Fonts of Comparative Statements Indented Bullets Communicating Using Numbers ZotMail Messages #12;- 1 - Introduction

  17. Managing Research Materials and Data: Recordkeeping Guidelines

    E-Print Network [OSTI]

    Managing Research Materials and Data: Recordkeeping Guidelines 1. Introduction Research Council and Universities Australia Managing Research Materials and Data: Recordkeeping Guidelines the management and disposal of research materials and data in accordance with the requirements

  18. Flexible Work Arrangements Manager Guidelines

    E-Print Network [OSTI]

    Jones, Michelle

    Flexible Work Arrangements Manager Guidelines The Ohio State University Office of Human Resources Page 1 of 2 Flexible Work Arrangement ­ Manager Assessment Issued 07/15/10 When you receive a proposal your manager to review for a decision. Remember that granting a flexible work arrangement may help

  19. SANCTIONING GUIDELINES STUDENT ORGANIZATION VIOLATIONS

    E-Print Network [OSTI]

    Gering, Jon C.

    and facilitate risk management program that focuses on ethical #12;Student Conduct Code: Sanctioning Guidelines and the consequences of property damage or theft. · Every person involved in incident write a reflection paper. · Every. Taking property/property damage 1.1. Intentional taking of (a) University property or (b) property

  20. Graduate Senate Professional Enrichment Grant Application System

    E-Print Network [OSTI]

    Stuart, Steven J.

    Graduate Senate Professional Enrichment Grant Application System (PEGAS) Committee Rules a Frequently Asked Questions section on the Professional Enrichment Grant Application Service (PEGAS) webpage outlining common questions on Professional Enrichment Grants (PEG) applications. Rule II. Committee

  1. EPA`s risk assessment guidelines: Overview

    SciTech Connect (OSTI)

    Patton, D.E. [Environmental Protection Agency, Washington, DC (United States)

    1990-12-31T23:59:59.000Z

    The US Environmental Protection Agency (EPA) risk assessment guidelines for cancer, quantification, and exposure issues are discussed.

  2. Technology Innovation Program Guidelines and Documentation

    E-Print Network [OSTI]

    Magee, Joseph W.

    #12;Technology Innovation Program Guidelines and Documentation Requirements for Research Involving ............................................................................ 5 F. Required Documentation.............................................................................. 16 D. Required Documentation

  3. Guidelines for the verification and validation of expert system software and conventional software: Rationale and description of V&V guideline packages and procedures. Volume 5

    SciTech Connect (OSTI)

    Mirsky, S.M.; Hayes, J.E.; Miller, L.A. [Science Applications International Corp., McLean, VA (United States)

    1995-03-01T23:59:59.000Z

    This report is the fifth volume in a series of reports describing the results of the Expert System Verification C, and Validation (V&V) project which is jointly funded by the U.S. Nuclear Regulatory Commission and the Electric Power Research Institute toward the objective of formulating Guidelines for the V&V of expert systems for use in nuclear power applications. This report provides the rationale for and description of those guidelines. The actual guidelines themselves are presented in Volume 7, {open_quotes}User`s Manual.{close_quotes} Three factors determine what V&V is needed: (1) the stage of the development life cycle (requirements, design, or implementation); (2) whether the overall system or a specialized component needs to be tested (knowledge base component, inference engine or other highly reusable element, or a component involving conventional software); and (3) the stringency of V&V that is needed (as judged from an assessment of the system`s complexity and the requirement for its integrity to form three Classes). A V&V Guideline package is provided for each of the combinations of these three variables. The package specifies the V&V methods recommended and the order in which they should be administered, the assurances each method provides, the qualifications needed by the V&V team to employ each particular method, the degree to which the methods should be applied, the performance measures that should be taken, and the decision criteria for accepting, conditionally accepting, or rejecting an evaluated system. In addition to the Guideline packages, highly detailed step-by-step procedures are provided for 11 of the more important methods, to ensure that they can be implemented correctly. The Guidelines can apply to conventional procedural software systems as well as all kinds of Al systems.

  4. Business Expense Guidelines Page 1 CALTECH BUSINESS EXPENSE GUIDELINES rev 09-12-05.doc

    E-Print Network [OSTI]

    Goddard III, William A.

    Business Expense Guidelines Page 1 CALTECH BUSINESS EXPENSE GUIDELINES rev 09-12-05.doc Office of Financial Services March 2003 Revision date: 9/12/05 #12;Business Expense Guidelines Page 2 CALTECH BUSINESS EXPENSE GUIDELINES rev 09-12-05.doc CCoonntteennttss 1. Introduction

  5. TU Vienna Building Guidelines 1 Purpose and essential parts of the building guidelines

    E-Print Network [OSTI]

    Szmolyan, Peter

    TU Vienna Building Guidelines § 1 Purpose and essential parts of the building guidelines § 2 Scope § 3 Responsibilities § 4 Access § 5 Opening times § 6 Use of buildings, rooms and facilities § 7 of infringement of the building guidelines § 1 Purpose and essential parts of the building guidelines (1

  6. MO. REV. MO. MAGNETIC CLEANLINESS GUIDELINES

    E-Print Network [OSTI]

    Rathbun, Julie A.

    MO. REV. MO. ATM-865 MAGNETIC CLEANLINESS GUIDELINES PAGE 1 Of 3 DATE 4/6/70 The purpose of this ATM is to update the ALSEP Magnetic Cleanliness Guidelines as delineated in A TM-294, dated 1 June. ATM-865 MAGNETIC CLEANLINESS GUIDELINES PAGE 2 OF 3 DATE 4/6/70 A review of the ALSEP Magnetic

  7. M&V Guidelines: Measurement and

    E-Print Network [OSTI]

    M&V Guidelines: Measurement and Verification for Federal Energy Projects Version 3.0 #12;M&V Guidelines: Measurement and Verification for Federal Energy Projects Version 3.0 Prepared For: U 2007. M&V Guidelines 3.0 FEMPii #12;Contents Section Page Section 1 Measurement and Verification (M

  8. Home Energy Professional Certifications (Fact Sheet), Guidelines For Home Energy Professionals, Energy Efficiency & Renewable Energy (EERE)

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742Energy ChinaofSchaefer To:Department of EnergySeacrist,the CommunityThis checklistWaterHome

  9. Use of Social Networking Sites and Other Electronic Media by Medical Students There has been ongoing concern about the non-professional use of Facebook and other similar

    E-Print Network [OSTI]

    Sinnamon, Gordon J.

    ongoing concern about the non-professional use of Facebook and other similar sites by students across professionals. 2) Accepting as "friends" on Facebook individuals whom you have come to know in a clinical have access to it. Facebook and other networking sites are indeed very useful for staying in touch

  10. William E. Galloway Professional Summary

    E-Print Network [OSTI]

    Yang, Zong-Liang

    -water flow history of sedimentary uranium deposits. Professional Work Experience A. Present Positions: Morgan course in terrigenous clastic depositional systems. D. Director, Geologic Section, Exploration Research scientists and technicians. #12;2 E. Research Group Supervisor, Exploration Research Division

  11. GRADUATE/PROFESSIONAL FELLOWSHIP PROGRAM

    E-Print Network [OSTI]

    Botte, Gerardine G.

    -point average; graduate or professional examination scores be eligible for consideration. and percentile ranking the application as the college or university A copy of the score report and percentile ranking on official

  12. (Energy Risk Professional, ERP), (GARP),

    E-Print Network [OSTI]

    Kaplan, Alexander

    · ­ Dragana Pilipovic. Energy Risk: Valuing and Managing Energy Derivatives,2nd Edition (New York: Mc). 9: Risk Management of Energy Derivatives · ­ Alexander Triantis. Handbook of Modern Finance (New 1 ( ) : . (Energy Risk Professional, ERP

  13. Accepting the T3D

    SciTech Connect (OSTI)

    Rich, D.O.; Pope, S.C.; DeLapp, J.G.

    1994-10-01T23:59:59.000Z

    In April, a 128 PE Cray T3D was installed at Los Alamos National Laboratory`s Advanced Computing Laboratory as part of the DOE`s High-Performance Parallel Processor Program (H4P). In conjunction with CRI, the authors implemented a 30 day acceptance test. The test was constructed in part to help them understand the strengths and weaknesses of the T3D. In this paper, they briefly describe the H4P and its goals. They discuss the design and implementation of the T3D acceptance test and detail issues that arose during the test. They conclude with a set of system requirements that must be addressed as the T3D system evolves.

  14. K-Basins design guidelines

    SciTech Connect (OSTI)

    Roe, N.R.; Mills, W.C.

    1995-06-01T23:59:59.000Z

    The purpose of the design guidelines is to enable SNF and K Basin personnel to complete fuel and sludge removal, and basin water mitigation by providing engineering guidance for equipment design for the fuel basin, facility modifications (upgrades), remote tools, and new processes. It is not intended to be a purchase order reference for vendors. The document identifies materials, methods, and components that work at K Basins; it also Provides design input and a technical review process to facilitate project interfaces with operations in K Basins. This document is intended to compliment other engineering documentation used at K Basins and throughout the Spent Nuclear Fuel Project. Significant provisions, which are incorporated, include portions of the following: General Design Criteria (DOE 1989), Standard Engineering Practices (WHC-CM-6-1), Engineering Practices Guidelines (WHC 1994b), Hanford Plant Standards (DOE-RL 1989), Safety Analysis Manual (WHC-CM-4-46), and Radiological Design Guide (WHC 1994f). Documents (requirements) essential to the engineering design projects at K Basins are referenced in the guidelines.

  15. Blind and Deaf to Acceptance: The Role of Self-Esteem in Capitalizing on Social Acceptance

    E-Print Network [OSTI]

    Luerssen, Anna Maud

    2013-01-01T23:59:59.000Z

    Blind and Deaf to Acceptance: The Role of Self-Esteem inGlaser Spring 2013 Abstract Blind and Deaf to Acceptance:never have been possible. Blind and Deaf to Acceptance: The

  16. Hydrogen Student Design Contest - Now accepting applications...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Hydrogen Student Design Contest - Now accepting applications Hydrogen Student Design Contest - Now accepting applications December 1, 2014 9:00AM EST to January 16, 2015 11:59PM...

  17. Guidelines

    E-Print Network [OSTI]

    Page 1 ... Think of it as an exercise in learning, and reporting what you have learned. There is a lot of truth in the saying, “If you can't explain it, you don't understand it”. 2. Yorm ansronsrmu'rv .... Now subtract 85 from both sides. :3 - 151' -29:r ...

  18. Guidelines

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOnItem NotEnergy,ARMFormsGasReleaseSpeechesHallNot Logged In You| Blandine

  19. ALTERNATE ACCEPTANCE OF WULFENSTEIN PIT AGGREGATE

    SciTech Connect (OSTI)

    J. W. Keifer

    1999-06-24T23:59:59.000Z

    The purpose of this calculation is to evaluate Wulfenstein fine aggregate for acceptability under ASTM C 33 standard specification.

  20. Secretary Richardson Accepts Recommendations for Improving Security...

    National Nuclear Security Administration (NNSA)

    Secretary Richardson Accepts Recommendations for Improving Security at Nuclear Weapons Laboratories | National Nuclear Security Administration Facebook Twitter Youtube Flickr RSS...

  1. Clinical Instructor Responsibilities The APTA has detailed voluntary guidelines for clinical instructors. The guidelines

    E-Print Network [OSTI]

    Contractor, Anis

    Clinical Instructor Responsibilities The APTA has detailed voluntary guidelines for clinical instructors. The guidelines are divided into six key areas: · Clinical competence and legal and ethical behavior that meets or exceeds

  2. Perceptions of Human Resource Development Professionals Toward their Professional Association's Standards on Ethics and Integrity

    E-Print Network [OSTI]

    Claus, Vanessa A

    2013-04-15T23:59:59.000Z

    organizations must recognize the impact that professional context variables have on ethical decision making. The purpose of this study was to examine Human Resource Development professional’s perceptions of the Academy of Human Resource Development’s Standards...

  3. Office for Graduate Education and Postdoctoral Affairs Revised 06/2014 Guidelines for Promoting a Postdoctoral Appointee to SPRA Page 1 of 4

    E-Print Network [OSTI]

    Goldman, Steven A.

    support at the professional level by directing and executing small, complex research projects or major a Postdoctoral Appointee to SPRA Page 1 of 4 Guidelines for Promoting a Postdoctoral Appointee to Sr. Project appointee to the SPRA position requires approval from SMD Finance and Administration (Sharon Mc

  4. Biomass Guidelines (Prince Edward Island, Canada)

    Broader source: Energy.gov [DOE]

    PEI Biomass Guidelines identify two major pathways that biomass projects may follow: No Public Investment, and Public Investment. Projects with Public Investment include any project that has:

  5. Electric Vehicle Charging Infrastructure Deployment Guidelines...

    Open Energy Info (EERE)

    to: navigation, search Tool Summary LAUNCH TOOL Name: Electric Vehicle Charging Infrastructure Deployment Guidelines: British Columbia AgencyCompany Organization: Natural...

  6. Industrial Energy Audit Guidebook: Guidelines for Conducting...

    Open Energy Info (EERE)

    Industry Resource Type: Guidemanual Website: china.lbl.govsiteschina.lbl.govfilesLBNL-3991E.Industrial%20Energy Industrial Energy Audit Guidebook: Guidelines for Conducting...

  7. RELAP5-3D Developer Guidelines and Programming Practices

    SciTech Connect (OSTI)

    Dr. George L Mesina

    2014-03-01T23:59:59.000Z

    Our ultimate goal is to create and maintain RELAP5-3D as the best software tool available to analyze nuclear power plants. This begins with writing excellent programming and requires thorough testing. This document covers development of RELAP5-3D software, the behavior of the RELAP5-3D program that must be maintained, and code testing. RELAP5-3D must perform in a manner consistent with previous code versions with backward compatibility for the sake of the users. Thus file operations, code termination, input and output must remain consistent in form and content while adding appropriate new files, input and output as new features are developed. As computer hardware, operating systems, and other software change, RELAP5-3D must adapt and maintain performance. The code must be thoroughly tested to ensure that it continues to perform robustly on the supported platforms. The coding must be written in a consistent manner that makes the program easy to read to reduce the time and cost of development, maintenance and error resolution. The programming guidelines presented her are intended to institutionalize a consistent way of writing FORTRAN code for the RELAP5-3D computer program that will minimize errors and rework. A common format and organization of program units creates a unifying look and feel to the code. This in turn increases readability and reduces time required for maintenance, development and debugging. It also aids new programmers in reading and understanding the program. Therefore, when undertaking development of the RELAP5-3D computer program, the programmer must write computer code that follows these guidelines. This set of programming guidelines creates a framework of good programming practices, such as initialization, structured programming, and vector-friendly coding. It sets out formatting rules for lines of code, such as indentation, capitalization, spacing, etc. It creates limits on program units, such as subprograms, functions, and modules. It establishes documentation guidance on internal comments. The guidelines apply to both existing and new subprograms. They are written for both FORTRAN 77 and FORTRAN 95. The guidelines are not so rigorous as to inhibit a programmer’s unique style, but do restrict the variations in acceptable coding to create sufficient commonality that new readers will find the coding in each new subroutine familiar. It is recognized that this is a “living” document and must be updated as languages, compilers, and computer hardware and software evolve.

  8. NIHR Carbon Guidelines -FAQs 1. Why do the guidelines address only the principles of good research?

    E-Print Network [OSTI]

    Diggle, Peter J.

    NIHR Carbon Guidelines - FAQs 1. Why do the guidelines address only the principles of good research? The guidelines outline strategies to reduce the carbon emissions from health research. Because most publicly to reduce carbon emissions would also reduce the carbon emissions from health research. However, strategies

  9. 2009-10 BUDGET DEVELOPMENT GUIDELINES AND 2010-11 PRELIMINARY GENERAL FUND BUDGET GUIDELINES

    E-Print Network [OSTI]

    2009-10 BUDGET DEVELOPMENT GUIDELINES AND 2010-11 PRELIMINARY GENERAL FUND BUDGET GUIDELINES in the future. The 2009-10 Budget Development Guidelines below identify projected revenues and expenditures fund, and the first component of a two-year 10 percent, or $50 million, budget reduction plan. Due

  10. Strategy Guideline: HVAC Equipment Sizing

    SciTech Connect (OSTI)

    Burdick, A.

    2012-02-01T23:59:59.000Z

    The heating, ventilation, and air conditioning (HVAC) system is arguably the most complex system installed in a house and is a substantial component of the total house energy use. A right-sized HVAC system will provide the desired occupant comfort and will run efficiently. This Strategy Guideline discusses the information needed to initially select the equipment for a properly designed HVAC system. Right-sizing of an HVAC system involves the selection of equipment and the design of the air distribution system to meet the accurate predicted heating and cooling loads of the house. Right-sizing the HVAC system begins with an accurate understanding of the heating and cooling loads on a space; however, a full HVAC design involves more than just the load estimate calculation - the load calculation is the first step of the iterative HVAC design procedure. This guide describes the equipment selection of a split system air conditioner and furnace for an example house in Chicago, IL as well as a heat pump system for an example house in Orlando, Florida. The required heating and cooling load information for the two example houses was developed in the Department of Energy Building America Strategy Guideline: Accurate Heating and Cooling Load Calculations.

  11. Nathaniel Joseph Fisch Professional Interests

    E-Print Network [OSTI]

    Professional Responsibilities 2001 -- Co-founder, General Plasma Technologies LLC 1998 Chair, Division; and statistical inference and pattern recognition. University Education MIT Department of Electrical Engineering for driving electric currents. Fellow of NASA Institute for Advanced Concepts (2003) Bronze Medal, United

  12. Professional Summary August 8, 2011

    E-Print Network [OSTI]

    Yang, Zong-Liang

    . Sedimentology and stratigraphy B. Petrology of sedimentary rocks C. Reservoir characterization Professional Work: Sedimentology, v. 55, p. 1623­1642. Fu, Qilong, and Qing, H., 2007, Neomorphism of the Ratner limestone in south in south-central Saskatchewan, Canada: Sedimentology, v. 53, p. 825­848. Fu, Qilong, Qing, H., and Bergman

  13. Guidelines for inservice testing at nuclear power plants

    SciTech Connect (OSTI)

    Campbell, P.

    1995-04-01T23:59:59.000Z

    The staff of the U.S. Nuclear Regulatory Commission (NRC) gives licensees guidelines and recommendations for developing and implementing programs for the inservice testing of pumps and valves at commercial nuclear power plants. The staff discusses the regulations; the components to be included in an inservice testing program; and the preparation and content of cold shutdown justifications, refueling outage justifications, and requests for relief from the American Society of Mechanical Engineers Code requirements. The staff also gives specific guidance on relief acceptable to the NRC and advises licensees in the use of this information at their facilities. The staff discusses the revised standard technical specifications for the inservice testing program requirements and gives guidance on the process a licensee may follow upon finding an instance of noncompliance with the Code.

  14. OPA EVMS Acceptance Review Out Briefing

    E-Print Network [OSTI]

    Princeton Plasma Physics Laboratory

    Guidelines) Organization and Analysis & Management Reports Jim Fountain (GL1-5), Ethan Merrill (22-27)Jim and added scope without formal baseline change; · The project should measure against a realistic baseline

  15. UK Forestry Standard Guidelines Forests and people

    E-Print Network [OSTI]

    UK Forestry Standard Guidelines Forests and people #12;Key to symbols UKFS Requirements for sustainable forest management Element of SFM Reference number Good forestry practice requirement Reference #12;UK Forestry Standard Guidelines Forests and people Forestry Commission: Edinburgh #12;ii Forests

  16. Research Data and Materials Recordkeeping Guideline

    E-Print Network [OSTI]

    materials and data which results from a research project hosted by the University. 2.2 Research data original data and material associated with the project may be transferred. The University may seek Page 1 Guidelines Research Data and Materials Recordkeeping Guideline Policy Supported

  17. Guidelines for Manuscript Preparation Purdue University Press

    E-Print Network [OSTI]

    Ginzel, Matthew

    Guidelines for Manuscript Preparation Purdue University Press The editing of your book or essay will be considerably faster and less costly if you follow a few guidelines for manuscript preparation. Double-space all the space bar to indent paragraphs. Do not type anything in all caps. Do include page numbers in your

  18. Report Writing Guidelines Mahesh B. Patil

    E-Print Network [OSTI]

    Narayanan, H.

    Report Writing Guidelines Mahesh B. Patil Reports (seminar reports, thesis reports, technical care of, too. The guidelines presented here are about the latter. Do follow these tips to make your of writing a flowery acknowledgment! 3. Make sure your paragraphs have some indentation

  19. RISK SEVERITY GUIDELINES For Issues Management Application

    E-Print Network [OSTI]

    RISK SEVERITY GUIDELINES For Issues Management Application OIA/OCA Risk Methodology, Document # 04 to LBNL #12;RISK SEVERITY GUIDELINES For Issues Management Application OIA/OCA Risk Methodology, Document.03.001.000, Rev. 3 Issue Management Program Application 11-30-13 IMPACT Impact is determined by considering what

  20. UGA IACUC Isoflurane Safety Guidelines I. Introduction

    E-Print Network [OSTI]

    Arnold, Jonathan

    UGA IACUC Isoflurane Safety Guidelines I. Introduction Isoflurane, a halogenated anesthetic http://www.assaytech.us/ sell and analyze `personal monitoring systems' which measure the level Guidelines Page 2 of 3 Version: Final 3811 Before Procedure: Check vaporizer system for leaks o

  1. GUIDELINES FOR THESIS/DISSERTATION/PROJECT

    E-Print Network [OSTI]

    Thomas, Andrew

    GUIDELINES FOR THESIS/DISSERTATION/PROJECT PREPARATION The Graduate School 5755 Stodder Hall ­ Room 42 Revised February 2013 #12;ii GUIDELINES FOR THESIS/DISSERTATION/PROJECT PREPARATION. It is the student's responsibility to follow and meet the requirements when writing a dissertation, thesis

  2. Wellcome Trust Logo Guidelines February 2013

    E-Print Network [OSTI]

    Rambaut, Andrew

    Wellcome Trust Logo Guidelines February 2013 #12;1Wellcome Trust Logo Guidelines 1 Use of our status. Provided you remain in receipt of current Wellcome Trust funding, the logos can be used are in receipt of a Wellcome Trust fellowship then you may prefer to use the `Fellow' logo. Investigator If you

  3. ITS POLICIES AND GUIDELINES CATEGORY: Information Technology, Security, Privacy,

    E-Print Network [OSTI]

    Gering, Jon C.

    ITS POLICIES AND GUIDELINES CATEGORY: Information Technology, Security, Privacy, Information Access & Management STATUS: Approved GUIDELINE TITLE: Information Security Incident Response GUIDELINE PURPOSE: The purpose of information security incident response is to: mitigate the effects caused by such an incident

  4. Guidelines for Home Energy Professionals Project: Multifamily Job Task Analyses Needs Assessment

    SciTech Connect (OSTI)

    Dirr, N.; Hepinstall, D.; Douglas, M.; Buck, S.; Larney, C.

    2013-01-01T23:59:59.000Z

    This report describes the efforts carried out to determine whether there is a need to develop separate, multifamily-specific JTAs for the four proposed job categories. The multifamily SWS market committee considered these job designations to be the best candidates for developing JTAs and certification blueprints, as well as having the greatest potential for promoting job growth in the multifamily home performance industry.

  5. Vehicle Technologies Office: Workforce Development and Professional...

    Office of Environmental Management (EM)

    Education & Workforce Development Vehicle Technologies Office: Workforce Development and Professional Education Vehicle Technologies Office: Workforce Development and...

  6. Guidelines for Evaluation of Nuclear Facility Training Programs...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    0-94, Guidelines for Evaluation of Nuclear Facility Training Programs by Diane Johnson The Guidelines for Evaluation of Nuclear Facility Training Programs establish objectives and...

  7. assessment guidelines exposure: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Summary: Thesis Guidelines Booklet 2013-14 GRADUATE OFFICE TRUMAN STATE UNIVERSITY MCCLAIN HALL 203 | 660-785-4109 12;THESIS GUIDELINES BOOKLET TRUMAN STATE UNIVERSITY 1...

  8. agent guidelines table: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and Labrador 3 I Brownstone, Rob 39 RpmcInvestmentGuidelines11052012 UNIVERSITY OF OKLAHOMA Biotechnology Websites Summary: RpmcInvestmentGuidelines11052012 UNIVERSITY OF...

  9. Better Buildings Workforce Guidelines for Facility Energy Manager...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Guidelines for Facility Energy Manager - 2014 BTO Peer Review Better Buildings Workforce Guidelines for Facility Energy Manager - 2014 BTO Peer Review Presenter: Phil Coleman,...

  10. New Mexico Guidelines for Public Notification for Air Quality...

    Open Energy Info (EERE)

    New Mexico Guidelines for Public Notification for Air Quality Permit Applications Jump to: navigation, search OpenEI Reference LibraryAdd to library General: New Mexico Guidelines...

  11. CRAD, Assessment Criteria and Guidelines for Determining the...

    Office of Environmental Management (EM)

    Criteria and Guidelines for Determining the Adequacy of Software Used in the Safety Analysis and Design of Defense Nuclear Facilities CRAD, Assessment Criteria and Guidelines for...

  12. Northeast Home Heating Oil Reserve - Guidelines for Release ...

    Office of Environmental Management (EM)

    Heating Oil Reserve Northeast Home Heating Oil Reserve - Guidelines for Release Northeast Home Heating Oil Reserve - Guidelines for Release The Energy Policy and Conservation...

  13. M&V Guidelines: Measurement and Verification for Federal Energy...

    Broader source: Energy.gov (indexed) [DOE]

    M&V Guidelines: Measurement and Verification for Federal Energy Projects (Version 3.0) Draft M&V Guidelines: Measurement and Verification for Federal Energy Projects...

  14. Thermodynamic Guidelines for the Prediction of Hydrogen Storage...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Thermodynamic Guidelines for the Prediction of Hydrogen Storage Reactions and Their Application to Destabillzed Hydride Mixtures Thermodynamic Guidelines for the Prediction of...

  15. New Draft of Cybersecurity Risk Management Process (RMP) Guideline...

    Broader source: Energy.gov (indexed) [DOE]

    New Draft of Cybersecurity Risk Management Process (RMP) Guideline Now Available for Public Comment (March 2012) New Draft of Cybersecurity Risk Management Process (RMP) Guideline...

  16. SAPHIRE 8 Software Acceptance Test Plan

    SciTech Connect (OSTI)

    Ted S. Wood; Curtis L. Smith

    2009-07-01T23:59:59.000Z

    This document describe & report the overall SAPHIRE 8 Software acceptance test paln to offically release the SAPHIRE version 8 software to the NRC custoer for distribution.

  17. Central Characterization Program (CCP), Acceptable Knowledge...

    Office of Environmental Management (EM)

    for Los Alamos National Laboratory, TA-55 Mixed Transuranic Waste Streams Central Characterization Program (CCP), Acceptable Knowledge Summary Report for Los Alamos National...

  18. FBI officer accepts LANL counterintelligence post

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    LANL counterintelligence FBI officer accepts LANL counterintelligence post Cloyd has most recently served as assistant director of the Counterintelligence Division of the Federal...

  19. User systems guidelines for software projects

    SciTech Connect (OSTI)

    Abrahamson, L. (ed.)

    1986-04-01T23:59:59.000Z

    This manual presents guidelines for software standards which were developed so that software project-development teams and management involved in approving the software could have a generalized view of all phases in the software production procedure and the steps involved in completing each phase. Guidelines are presented for six phases of software development: project definition, building a user interface, designing software, writing code, testing code, and preparing software documentation. The discussions for each phase include examples illustrating the recommended guidelines. 45 refs. (DWL)

  20. Recommended Practice for Accepting New Concrete Pavement

    E-Print Network [OSTI]

    Recommended Practice for Accepting New Concrete Pavement Surfaces for Tire/Pavement Noise Designation: CPSCP PP 1-11 (rev 3/1/2011) National Concrete Pavement Technology Center 2711 South Loop Drive, Suite 4700 Ames, IA 50010 #12;PP 1-1 CPSCP Recommended Practice for Accepting New Concrete Pavement

  1. Nevada Test Site Waste Acceptance Criteria (NTSWAC)

    SciTech Connect (OSTI)

    NNSA /NSO Waste Management Project

    2008-06-01T23:59:59.000Z

    This document establishes the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office, Nevada Test Site Waste Acceptance Criteria (NTSWAC). The NTSWAC provides the requirements, terms, and conditions under which the Nevada Test Site will accept low-level radioactive (LLW) and LLW Mixed Waste (MW) for disposal.

  2. TENDER AND ACCEPTANCE FORM STIPULATED PRICE CONTRACT

    E-Print Network [OSTI]

    deYoung, Brad

    TENDER AND ACCEPTANCE FORM FOR STIPULATED PRICE CONTRACT June 2013 #12;Stipulated Price Contract with that of all Subcontractors working on the Project. (See Appendix "D" for sample schedule that must be submitted within 10 days #12;Stipulated Price Contract Tender and Acceptance Form Page 2 of contract award

  3. Climate VISION: 1605 (B) Reporting Guidelines

    Office of Scientific and Technical Information (OSTI)

    Voluntary GHG Reporting Guidelines Established by Section 1605(b) of the Energy Policy Act of 1992, the Voluntary Reporting of Greenhouse Gases Program (also known as the 1605(b)...

  4. Application Guidelines for Energy Efficient Motors

    E-Print Network [OSTI]

    Cowern, E. H.

    1983-01-01T23:59:59.000Z

    , higher costs and marginal improvements in overall plant efficiency. This paper offers some general guidelines that can be used to help the ultimate user put energy efficient drives on those applications where the greatest results can be achieved....

  5. Ornithological Observations 1 GUIDELINES TO AUTHORS

    E-Print Network [OSTI]

    de Villiers, Marienne

    Ornithological Observations 1 GUIDELINES TO AUTHORS Ornithological Observations is a semi flush left (no tabs or indents) and paragraphs must be separated by a line space. Authors are requested

  6. EIA guidelines - are they doing the job?

    SciTech Connect (OSTI)

    Lawrence, D.P. [Lawrence Environmental, Langley, British Columbia (Canada)

    1997-08-01T23:59:59.000Z

    There is a tendency to evaluate the merits of the direction provided by the regulatory level to EIA practitioners by focusing exclusively on the contents of EIA requirements as expressed through legislation and regulations. However, much more substantive guidance is provided through general and project-specific EIA guidelines. EIA guidelines in Canada provide a useful case in point to EIA regulators and practitioners in the United States and elsewhere. The Federal government in Canada and in the ten Canadian provinces each has separate and distinctly different EIA legislation, regulations and guidelines. A review of the contents of EIA guidelines across these eleven jurisdictions can provide many insights regarding the role that EIA regulators can and should assume in shaping the contents of EIA documents and the conduct of the EIA planning process.

  7. 1995 DOCUMENTATION GUIDELINES FOR EVALUATION & MANAGEMENT SERVICES

    E-Print Network [OSTI]

    Goldman, Steven A.

    1 1995 DOCUMENTATION GUIDELINES FOR EVALUATION & MANAGEMENT SERVICES I. INTRODUCTION WHAT IS DOCUMENTATION AND WHY IS IT IMPORTANT? Medical record documentation is required to record pertinent facts, examinations, tests, treatments, and outcomes. The medical record chronologically documents the care

  8. Module 9: Acts, Codes, Regulations and Guidelines

    Broader source: Energy.gov [DOE]

    This course covers the mandating of alternative fuel vehicles in the US, the codes, regulations, and guidelines concerning the use of hydrogen, where to look for additional information on hydrogen standards

  9. Grantee Checklist for the Guidelines and Standards Requirement

    Broader source: Energy.gov [DOE]

    This document walks Grantees through the Guidelines and Standards requirement of the Quality Work Plan.

  10. Guidelines for Correctly Using the DOE Zero Energy Ready Home...

    Broader source: Energy.gov (indexed) [DOE]

    ZERH Logo Use Guidelines More Documents & Publications Builder Partner Agreement Verifier Partner Agreement Training Partner Agreement...

  11. Guidelines for the Performance of Nonproliferation Assessments

    SciTech Connect (OSTI)

    Mladineo, Stephen V.; Denning, Richard S.; Roglans-Ribas, Jordi; Bari, Robert A.; Eagle, James; Olinger, Chad T.; Phillips, Jon R.; Rochau, Gary; Schock, Robert N.; Mc Guire, Suzanne

    2003-05-29T23:59:59.000Z

    The National Nuclear Security Administration (NNSA) established a Nonproliferation Assessment Methodology (NPAM) Working Group, comprised of representatives from the Department of Energy (DOE) laboratories and academia, to develop guidelines for the practical application of Nonproliferation Assessment Methodologies (NPAM). The purpose of these methodologies is to address questions and issues related to the proliferation of nuclear weapons and weapons-useable nuclear materials and related technologies, as input to policy analysis. This document presents the guidelines developed by the Working Group.

  12. Industry Professional | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are8COaBulkTransmissionSitingProcess.pdfGetecGtel JumpCounty,Jump7Open Energy InformationProfessional Jump to:

  13. Running head: APA SIXTH EDITION GUIDELINES 1 APA Sixth Edition Guidelines for Paper Formatting in the College of Nursing Program

    E-Print Network [OSTI]

    Arizona, University of

    Running head: APA SIXTH EDITION GUIDELINES 1 APA Sixth Edition Guidelines for Paper Formatting of Arizona #12;APA SIXTH EDITION GUIDELINES 2 APA Sixth Edition Guidelines for Paper Formatting of the page. The abstract does not have paragraph indentation and is double spaced. It is okay to use

  14. Registered Charity Number 207890 Accepted Manuscript

    E-Print Network [OSTI]

    by the author(s) which may alter content, and that the standard Terms & Conditions and the ethical guidelines;Measuring acoustic energy density in microchannel acoustophoresis using a simple and rapid light for measuring the acoustic energy density in microchan- nel acoustophoresis based on light

  15. NEVADA TEST SITE WASTE ACCEPTANCE CRITERIA

    SciTech Connect (OSTI)

    U.S. DEPARTMENT OF ENERGY, NATIONAL NUCLEAR SECURITY ADMINISTRATION, NEVADA SITE OFFICE

    2005-07-01T23:59:59.000Z

    This document establishes the U. S. Department of Energy, National Nuclear Security Administration Nevada Site Office (NNSA/NSO) waste acceptance criteria (WAC). The WAC provides the requirements, terms, and conditions under which the Nevada Test Site will accept low-level radioactive and mixed waste for disposal. Mixed waste generated within the State of Nevada by NNSA/NSO activities is accepted for disposal. It includes requirements for the generator waste certification program, characterization, traceability, waste form, packaging, and transfer. The criteria apply to radioactive waste received at the Nevada Test Site Area 3 and Area 5 Radioactive Waste Management Site for storage or disposal.

  16. Developing Secure Power Systems Professional Competence: Alignment...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Developing Secure Power Systems Professional Competence: Alignment and Gaps in Workforce Development Programs - Phase 2 (JulyAugust 2013) Developing Secure Power Systems...

  17. Register today! Professional Training for Certified Practitioners...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    operating characteristics of key energy using systems, fundamentals of system optimization, regulatory requirements and more. This training also prepares professionals to...

  18. Nevada Test Site Waste Acceptance Criteria

    SciTech Connect (OSTI)

    U.S. Department of Energy, Nevada Operations Office, Waste Acceptance Criteria

    1999-05-01T23:59:59.000Z

    This document provides the requirements, terms, and conditions under which the Nevada Test Site will accept low-level radioactive and mixed waste for disposal; and transuranic and transuranic mixed waste for interim storage at the Nevada Test Site.

  19. Sage-Grouse Lek Guideline Review Report

    SciTech Connect (OSTI)

    John Reisenauer

    2011-05-01T23:59:59.000Z

    On April 21, 2011, an Idaho National Laboratory (INL) Land Use Committee meeting was convened to support a Department of Energy Idaho Operations Office (DOE-ID) unofficial request to obtain Land Use Committee comments pertaining to the proposed Sage-Grouse Breeding Habitat Regulations. Two documents were provided from DOE-ID pertaining to the proposed regulations: “Guidelines for INL Site Activities within Sage-grouse Breeding Habitat” and “Guidelines for New Infrastructure Development and Future Activities on the INL Site.” The INL Land Use Committee agreed to conduct this unofficial review in the spirit of collaboration between DOE-ID and the INL Land Use Committee. However, through this cursory review, significant concerns were raised regarding the guidelines, INL financial obligations, and the draft Candidate Conservation Agreement, which was not part of the requested review but is referred to by the guideline. Therefore, it is the position of the INL Land Use Committee, based on the issues raised in its cursory review, that DOE-ID request INL (through contractual channels) to conduct a formal review of the draft Candidate Conservation Agreement and guidelines. A formal review would allow ample time to thoroughly review the extensive draft regulations, identify areas of concern, and establish impacts (e.g., cost and project delays).

  20. PROFESSIONAL SERVICES GUIDE FLORIDA ATLANTIC UNIVERSITY

    E-Print Network [OSTI]

    Fernandez, Eduardo

    PROFESSIONAL SERVICES GUIDE FOR FLORIDA ATLANTIC UNIVERSITY APRIL 2003 #12;April 2003 FAU-PSG Page 2 of 74 FLORIDA ATLANTIC UNIVERSITY PROFESSIONAL SERVICES GUIDE Table of Contents Page 2-4 ARTICLE 1 of Contract 5.2 Construction Manager Projects Page 34 ARTICLE 6 Construction Administration 6.1 General Page

  1. EINSTEIN POLICY ON OUTSIDE PROFESSIONAL INCOME BACKGROUND

    E-Print Network [OSTI]

    Kenny, Paraic

    EINSTEIN POLICY ON OUTSIDE PROFESSIONAL INCOME 1 BACKGROUND: The System of Appointments with the rules and regulations prescribed by the College of Medicine from time to time." The Albert Einstein to the management of professional fees or other outside income earned by individuals holding Einstein faculty

  2. Dedicated to providing of health professional faculty,

    E-Print Network [OSTI]

    Mohaghegh, Shahab

    Dedicated to providing training of health professional faculty, students and practitioners in the diagnosis, treatment and prevention of disease, disability and other health problems related to our elderly;STATUTORY PURPOSES Improve the training of health professionals in geriatrics; Develop and disseminate

  3. Guidelines for Implementation of Article 5.3 of the WHO Framework Convention on Tobacco Control

    E-Print Network [OSTI]

    WHO

    2013-01-01T23:59:59.000Z

    evidence. The measures recommended in these guidelines aimWhile the measures recommended in these guidelines should bemeasures beyond those recommended in these guidelines when

  4. Federal Poverty Guideline Underestimates Costs of Living for Older Persons in California

    E-Print Network [OSTI]

    Wallace, Steven P.; Molina, L. Cricel

    2008-01-01T23:59:59.000Z

    Brief February 2008 Federal Poverty Guideline Underestimatesdocuments that the federal poverty guideline covers lessin the state. The federal poverty guideline is often used to

  5. Measure Guideline: High Efficiency Natural Gas Furnaces

    SciTech Connect (OSTI)

    Brand, L.; Rose, W.

    2012-10-01T23:59:59.000Z

    This Measure Guideline covers installation of high-efficiency gas furnaces. Topics covered include when to install a high-efficiency gas furnace as a retrofit measure, how to identify and address risks, and the steps to be used in the selection and installation process. The guideline is written for Building America practitioners and HVAC contractors and installers. It includes a compilation of information provided by manufacturers, researchers, and the Department of Energy as well as recent research results from the Partnership for Advanced Residential Retrofit (PARR) Building America team.

  6. A Study of Experience Credit for Professional Engineering Licensure

    SciTech Connect (OSTI)

    Martin, M.A.

    2003-08-11T23:59:59.000Z

    Oak Ridge National Laboratory performed a study of experience credit for professional engineering licensure for the Department of Energy's Industrial Assessment Center (IAC) Program. One of the study's goals was to determine how state licensure boards grant experience credit for engineering licensure, particularly in regards to IAC experience and experience prior to graduation. Another goal involved passing IAC information to state licensure boards to allow the boards to become familiar with the program and determine if they would grant credit to IAC graduates. The National Council of Examiners for Engineers and Surveyors (NCEES) has adopted a document, the ''Model Law''. This document empowers states to create state engineering boards and oversee engineering licensure. The board can also interpret and adopt rules and regulations. The Model Law also gives a general ''process'' for engineering licensure, the ''Model Law Engineer''. The Model Law Engineer requires that an applicant for professional licensure, or professional engineering (PE) licensure, obtain a combination of formal education and professional experience and successfully complete the fundamentals of engineering (FE) and PE exams. The Model Law states that a PE applicant must obtain four years of ''acceptable'' engineering experience after graduation to be allowed to sit for the PE exam. Although the Model Law defines ''acceptable experience,'' it is somewhat open to interpretation, and state boards decide whether applicants have accumulated the necessary amount of experience. The Model Law also allows applicants one year of credit for postgraduate degrees as well as experience credit for teaching courses in engineering. The Model Law grants states the power to adopt and amend the bylaws and rules of the Model Law licensure process. It allows state boards the freedom to modify the experience requirements for professional licensure. This power has created variety in experience requirements, and licensure requirements can differ from state to state. Before this study began, six questions were developed to help document how state boards grant experience credit. Many of the questions were formulated to determine how states deal with teaching experience, postgraduate credit, experience prior to graduation, PE and FE waivers, and the licensure process in general. Data were collected from engineering licensure boards for each of the fifty states and the District of Columbia. Telephone interviews were the primary method of data collection, while email correspondence was also used to a lesser degree. Prior to contacting each board, the researchers attempted to review each state's licensure web site. Based on the data collected, several trends and patterns were identified. For example, there is a general trend away from offering credit for experience prior to graduation. The issue becomes a problem when a PE from one state attempts to gain a license in another state by comity or endorsement. Tennessee and Kansas have recently stopped offering this credit and Mississippi cautions applicants that it could be difficult to obtain licensure in other states.

  7. M&V Guidelines: Measurement and Verification for Federal Energy...

    Broader source: Energy.gov (indexed) [DOE]

    M&V Guidelines: Measurement and Verifi cation for Federal Energy Projects Version 3.0 M&V Guidelines: Measurement and Verification for Federal Energy Projects Version 3.0 Prepared...

  8. Guidelines for Writing Papers in Music History and Literature Classes

    E-Print Network [OSTI]

    Saldin, Dilano

    Guidelines for Writing Papers in Music History and Literature Classes which these Guidelines are based) Quick Guide: http them not to. · Margins of at least one inch on all sides. · Indent

  9. M&V Guidelines: Measurement and Verification for Federal Energy...

    Office of Environmental Management (EM)

    M&V Guidelines: Measurement and Verification for Federal Energy Projects (Version 3.0) M&V Guidelines: Measurement and Verification for Federal Energy Projects (Version 3.0)...

  10. USGS National Wildlife Health Center Diagnostic Case Submission Guidelines

    E-Print Network [OSTI]

    USGS National Wildlife Health Center Diagnostic Case Submission Guidelines The following guidelines broadly outline the framework used by the National Wildlife Health Center (NWHC to the submitting agency, its wildlife populations, or domestic animal and human health. Type of Specimens

  11. Methodology Guidelines on Life Cycle Assessment of Photovoltaic Electricity

    E-Print Network [OSTI]

    1 Methodology Guidelines on Life Cycle Assessment of Photovoltaic Electricity of Photovoltaic Electricity #12;IEA-PVPS-TASK 12 Methodology Guidelines on Life Cycle Assessment of Photovoltaic Electricity INTERNATIONAL ENERGY AGENCY PHOTOVOLTAIC POWER SYSTEMS PROGRAMME Methodology

  12. Draft M&V Guidelines: Measurement and Verification for Federal...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Draft M&V Guidelines: Measurement and Verification for Federal Energy Projects (Version 4.0) Draft M&V Guidelines: Measurement and Verification for Federal Energy Projects (Version...

  13. Acceptance Priority Ranking & Annual Capacity Report

    SciTech Connect (OSTI)

    none,

    2004-07-31T23:59:59.000Z

    The Nuclear Waste Policy Act of 1982, as amended (the Act), assigns the Federal Government the responsibility for the disposal of spent nuclear fuel and high-level waste. Section 302(a) of the Act authorizes the Secretary to enter into contracts with the owners and generators of commercial spent nuclear fuel and/or high-level waste. The Standard Contract for Disposal of Spent Nuclear Fuel and/or High-Level Radioactive Waste (Standard Contract) established the contractual mechanism for the Department's acceptance and disposal of spent nuclear fuel and high-level waste. It includes the requirements and operational responsibilities of the parties to the Standard Contract in the areas of administrative matters, fees, terms of payment, waste acceptance criteria, and waste acceptance procedures. The Standard Contract provides for the acquisition of title to the spent nuclear fuel and/or high-level waste by the Department, its transportation to Federal facilities, and its subsequent disposal.

  14. Public Acceptability of Sustainable Transport Measures: A Review...

    Open Energy Info (EERE)

    Public Acceptability of Sustainable Transport Measures: A Review of the Literature Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Public Acceptability of Sustainable...

  15. EAC Recommendations for DOE Action Regarding Consumer Acceptance...

    Energy Savers [EERE]

    Consumer Acceptance of Smart Grid - June 6, 2013 EAC Recommendations for DOE Action Regarding Consumer Acceptance of Smart Grid - June 6, 2013 EAC Recommendations for DOE Action...

  16. Indian Energy Summer Internship Program Now Accepting Applications...

    Office of Environmental Management (EM)

    Indian Energy Summer Internship Program Now Accepting Applications: Deadline Is March 27 Indian Energy Summer Internship Program Now Accepting Applications: Deadline Is March 27...

  17. Quality Improvement Guidelines for Radiofrequency Ablation of Liver Tumours

    SciTech Connect (OSTI)

    Crocetti, Laura, E-mail: l.crocetti@med.unipi.i [University of Pisa, Division of Diagnostic Imaging and Intervention, Department of Hepatology, Liver Transplants, and Infectious Diseases (Italy); Baere, Thierry de [Institut de Cancerologie Gustave Roussy, Department of Interventional Radiology (France); Lencioni, Riccardo [University of Pisa, Division of Diagnostic Imaging and Intervention, Department of Hepatology, Liver Transplants, and Infectious Diseases (Italy)

    2010-02-15T23:59:59.000Z

    The development of image-guided percutaneous techniques for local tumour ablation has been one of the major advances in the treatment of liver malignancies. Among these methods, radiofrequency ablation (RFA) is currently established as the primary ablative modality at most institutions. RFA is accepted as the best therapeutic choice for patients with early-stage hepatocellular carcinoma (HCC) when liver transplantation or surgical resection are not suitable options [1, 2]. In addition, RFA is considered a viable alternate to surgery (1) for inoperable patients with limited hepatic metastatic disease, especially from colorectal cancer, and (2) for patients deemed ineligible for surgical resection because of extent and location of the disease or concurrent medical conditions [3]. These guidelines were written to be used in quality-improvement programs to assess RFA of HCC and liver metastases. The most important processes of care are (1) patient selection, (2) performing the procedure, and (3) monitoring the patient. The outcome measures or indicators for these processes are indications, success rates, and complication rates.

  18. UK Forestry Standard Guidelines Forests and

    E-Print Network [OSTI]

    UK Forestry Standard Guidelines Forests and climate change #12;Key to symbols UKFS Requirements for sustainable forest management Good forestry practice requirement Element of SFM Reference number Legal of SFM Reference number #12;Forests and climate change Forestry Commission: Edinburgh UK Forestry

  19. EM Health and Safety Plan Guidelines

    SciTech Connect (OSTI)

    Not Available

    1994-12-01T23:59:59.000Z

    This document contains information about the Health and Safety Plan Guidelines. Topics discussed include: Regulatory framework; key personnel; hazard assessment; training requirements; personal protective equipment; extreme temperature disorders or conditions; medical surveillance; exposure monitoring/air sampling; site control; decontamination; emergency response/contingency plan; emergency action plan; confined space entry; and spill containment.

  20. Alternate Thesis & Dissertation Formats Manuscript Format Guidelines

    E-Print Network [OSTI]

    Mayfield, John

    Alternate Thesis & Dissertation Formats Manuscript Format Guidelines In addition to the standard format for dissertation/thesis, the Graduate School allows for the use of an alternative format. The manuscript format refers to the use of articles and/or book chapters to replace the standard dissertation

  1. Internship Guidelines Department of English and Linguistics

    E-Print Network [OSTI]

    Gering, Jon C.

    Internship Guidelines Department of English and Linguistics Truman State University #12;Internships in English and Linguistics As a student, an internship offers you the chance to apply skills and theories learned in the classroom to a career situation; internships very often also give students new

  2. LASER SAFETY GUIDELINES July 26, 2006

    E-Print Network [OSTI]

    Holland, Jeffrey

    LASER SAFETY GUIDELINES July 26, 2006 #12;TABLE OF CONTENTS SECTION PAGE PREFACE 3 CHAPTER 1: INTRODUCTION TO LASER SAFETY AT PURDUE UNIVERSITY 4 CHAPTER 2: CONTROL MEASURES I. Introduction6 II. Engineering Controls 6 III. Administrative and Procedural Controls 7 IV. Class 3b and 4 Laser Controlled Area

  3. Women's Health: Guidelines for Breast Pump Coverage

    E-Print Network [OSTI]

    Grishok, Alla

    Women's Health: Guidelines for Breast Pump Coverage AETNA CIGNA UHC In-Network covered 100%, no out-of-network coverage. · The member would need to obtain the breast pump from a network provider. Breast pumps purchased-of-network provider facility. The member has the option to rent a breast pump or purchase a personal double

  4. GUIDELINES FOR HANDLING HAZARDOUS CHEMICAL WASTE

    E-Print Network [OSTI]

    Tennessee, University of

    GUIDELINES FOR HANDLING HAZARDOUS CHEMICAL WASTE The proper management of hazardous waste and regulatory compliance are achieved: 1. Make sure that no hazardous materials are placed into regular solid in the departmental chemical hygiene plan (CHP) before you begin to use hazardous substances. 3. Make sure you know

  5. Field Campaign Guidelines (ARM Climate Research Facility)

    SciTech Connect (OSTI)

    Voyles, JW

    2011-01-17T23:59:59.000Z

    The purpose of this document is to establish a common set of guidelines for the Atmospheric Radiation Measurement (ARM) Climate Research Facility for planning, executing, and closing out field campaigns. The steps that guide individual field campaigns are described in the Field Campaign Tracking database tool and are tailored to meet the scope of each specific field campaign.

  6. Measure Guideline: Window Repair, Rehabilitation, and Replacement

    SciTech Connect (OSTI)

    Baker, P.

    2012-12-01T23:59:59.000Z

    This measure guideline provides information and guidance on rehabilitating, retrofitting, and replacing existing window assemblies in residential construction. The intent is to provide information regarding means and methods to improve the energy and comfort performance of existing wood window assemblies in a way that takes into consideration component durability, in-service operation, and long term performance of the strategies.

  7. Introduction to NISTIR 7628 Guidelines for

    E-Print Network [OSTI]

    of its electric power infrastructure. This vast infrastructure upgrade--extending from homes economy that ensures future prosperity. These and other prospective benefits of "smart" electric power as needed. This first installment of the guidelines is: Steps to transform the nation's aging electric power

  8. Forests and soil UK Forestry Standard Guidelines

    E-Print Network [OSTI]

    ; forestry; soil; sustainable forest management; UK Forestry Standard. FCGL006/FC-GB(MMJ)/JCTP-2.5K/NOV11 for sustainable forest management Good forestry practice requirement Element of SFM Reference number LegalForests and soil UK Forestry Standard Guidelines #12;Key to symbols UKFS Requirements

  9. Graduate Student Video Contest: Guidelines and

    E-Print Network [OSTI]

    Thomas, Andrew

    GRAD TALKS Graduate Student Video Contest: Guidelines and Submission Information The UMaine Graduate School solicits video submissions for the first Graduate Student video contest. The contest and one video as part of the contest. Videos should be 2 minutes (120 seconds) long and should explain

  10. THESIS/DISSERTATION GUIDE Requirements and Guidelines

    E-Print Network [OSTI]

    Omiecinski, Curtis

    THESIS/DISSERTATION GUIDE 2012 Requirements and Guidelines for the Preparation of Master's Theses and Doctoral Dissertations Office of Theses and Dissertations 115 Kern Building University Park, PA 16802 phone://www.gradsch.psu.edu/current/thesis.html #12;1 INTRODUCTION The primary purpose of a thesis or dissertation is to train the student

  11. An economic approach to acceptance sampling

    E-Print Network [OSTI]

    Ruth, Robert Justin

    1973-01-01T23:59:59.000Z

    AN ECONOMIC APPROACH TO ACCEPTANCE SAMPLING A Thesis by ROBERT JUSTIN RUTH Subm1tted to the Graduate College of Texas AkM University in Partial fulfillment of the requirement for the degree of MASTER OP SCIENCE May 1973 Ma)or Sub... JUSTIN RUTH I Approved as to style and content by& , J ~ W P. H. Newell Head Departmen J McNicho e Mem er 8w~ D. R. Shreve Member May 1973 ABSTRACT An Economic Approach to Acceptance Sampling (&m 1973) Robert Justin Ruth, S. S ~ , Virgin1a...

  12. Nevada Test Site Waste Acceptance Criteria

    SciTech Connect (OSTI)

    U. S. Department of Energy, National Nuclear Security Administration Nevada Site Office

    2005-10-01T23:59:59.000Z

    This document establishes the U.S. Department of Energy (DOE), National Nuclear Security Administration Nevada Site Office (NNSA/NSO) waste acceptance criteria (WAC). The WAC provides the requirements, terms, and conditions under which the Nevada Test Site (NTS) will accept low-level radioactive (LLW) and mixed waste (MW) for disposal. It includes requirements for the generator waste certification program, characterization, traceability, waste form, packaging, and transfer. The criteria apply to radioactive waste received at the NTS Area 3 and Area 5 Radioactive Waste Management Complex (RWMC) for storage or disposal.

  13. Workshop: Natural Allies: Training Other Professionals Who Impact...

    Energy Savers [EERE]

    Natural Allies: Training Other Professionals Who Impact the Solar Industry Workshop: Natural Allies: Training Other Professionals Who Impact the Solar Industry May 22, 2014 2:30PM...

  14. POLICY GUIDANCE MEMORANDUM #12 Payment of Expenses for Professional...

    Energy Savers [EERE]

    POLICY GUIDANCE MEMORANDUM 12 Payment of Expenses for Professional Credentials POLICY GUIDANCE MEMORANDUM 12 Payment of Expenses for Professional Credentials Departmental...

  15. achieving professional status: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    way in which professional development impacts teacher efficacy (more) Iwanicki-Smith, Susan C. 2009-01-01 31 CONSTRUCTION PROFESSIONAL Computer Technologies and...

  16. Advanced control room design review guidelines: Integration of the NUREG-0700 guidelines and development of new human-system interface guidelines

    SciTech Connect (OSTI)

    Carter, R.J.

    1997-07-01T23:59:59.000Z

    This report documents the work conducted in four tasks of the Nuclear Regulatory Commission (NRC) project entitled Review Criteria for Human Factors Aspects of Advanced Controls and Instrumentation. The purpose of the first task was to integrate the applicable sections of NUREG-0700 into the advanced control room design review (ACRDR) guidelines to ensure that all applicable guidelines are together in one document and conveniently accessible to users. The primary objective of the second task was to formulate a strategy for the development of new ACRDR guidelines that have not otherwise been identified. The main focus of the third task was to modify the individual ACRDR guidelines generated to date to ensure that they are suitable for the intended nuclear power plant (NPP) control station system application. The goal of the fourth task was to develop human factors guidelines for two human-system interface categories that are missing from the current ACRDR guidelines document. During the first task those areas in NUREG-0700 that are not addressed by the ACRDR guidelines document were identified, the areas were subsequently reviewed against six recent industry human factors engineering review guidelines, and the NUREG-0700 guidelines were updated as necessary. In the second task 13 general categories of human-system interface guidelines that are either missing from or not adequately addressed by the ACRDR document were discovered. An approach was derived for the development of new ACRDR guidelines, a preliminary assessment of the available sources that may be useful in the creation of new guidelines and their applicability to the identified human-system interface categories was performed, and an estimate was made of the amount of time and level of effort required to complete the development of needed new ACRDR guidelines. During the third task those NPP control station systems to which the NUREG-0700 and ACRDR guidelines apply were identified, matrices of such applicability were developed to support the needs of the NRC inspectors and reviewers, a guideline modification audit and tracking system was designed, and the ACRDR guidelines were reviewed and modified where appropriate to ensure that their language is applicable to the nuclear industry. In the fourth task control and input device guidelines were generated and human factors guidelines for specific nuclear operations were drafted.

  17. ERDC/ELTR-08-29 Technical Guidelines for Environmental

    E-Print Network [OSTI]

    US Army Corps of Engineers

    ERDC/ELTR-08-29 Technical Guidelines for Environmental Dredging of Contaminated Sediments Michael R Guidelines for Environmental Dredging of Contaminated Sediments Michael R. Palermo, Paul R. Schroeder, Trudy technical guidelines for evaluating environmental dredging as a sediment remedy component. This document

  18. Some Guidelines on How to Deliver a Good Presentation

    E-Print Network [OSTI]

    Almulhem, Ahmad

    Some Guidelines on How to Deliver a Good Presentation Some Guidelines on How toSome Guidelines on How to Deliver a Good PresentationDeliver a Good Presentation King Fahd University of Petroleum irrelevant slides Review, rework, revise: Give it your best Practice, practice, ..., and practice your talk

  19. WHO Guidelines on Hand Hygiene in Health Care

    E-Print Network [OSTI]

    Kim, Duck O.

    WHO Guidelines on Hand Hygiene in Health Care First Global Patient Safety Challenge Clean Care guidelines on hand hygiene in health care. 1.Hand wash - standards. 2.Hygiene. 3.Cross infection - prevention arising from its use. Printed in France. WHO/IER/PSP/2009/01 #12;WHO Guidelines on Hand Hygiene in Health

  20. Guidelines for Writing PhD Recommendations Graduate School, Arts

    E-Print Network [OSTI]

    Guidelines for Writing PhD Recommendations Graduate School, Arts Faculty of Arts, University.......................................................................................................... 4 5 September 2008 Revised 4 July 2013 #12;Guidelines for Writing PhD Recommendations, Faculty of Arts, University of Aarhus 1 Guidelines for Writing PhD Recommendations Graduate School, Arts Faculty

  1. Official University Facebook page guidelines and procedures -revised January 10, 2014 UL Lafayette Facebook Page Guidelines and Procedures

    E-Print Network [OSTI]

    Kearfott, R. Baker

    Official University Facebook page guidelines and procedures - revised January 1 UL Lafayette Facebook Page Guidelines and Procedures For all UL setting up a Facebook presence for any University entity, college, department

  2. Guidelines for using Multimedia Equipment This documents purpose is to provide guidelines for the standard use of the multimedia

    E-Print Network [OSTI]

    Militzer, Burkhard

    Guidelines for using Multimedia Equipment 7 Sep 2001 Purpose This documents purpose is to provide guidelines for the standard use of the multimedia equipment available for use in Campbell Hall rooms 501

  3. Design guidelines for optical resonator biochemical sensors

    E-Print Network [OSTI]

    Kimerling, Lionel C.

    In this paper, we propose a design tool for dielectric optical resonator-based biochemical refractometry sensors. Analogous to the widely accepted photodetector figure of merit, the detectivity D*, we introduce a new sensor ...

  4. Professional Master of Science and Engineering

    E-Print Network [OSTI]

    Dyer, Bill

    and Engineering Project Management · Manufacturing Best Practices-- PROCESS · Manufacturing Best Practices complete 15 credits of foundational coursework and an additional 15 credits based on their educational and engineering professionals in industries such as: · construction and manufacturing · science and technology

  5. Differing Professional Opinions on Technical Issues

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2006-11-16T23:59:59.000Z

    To establish a differing professional opinion (DPO) policy to facilitate dialogue and resolution on DPOs related to environment, safety, and health of DOE facilities and activities. Canceled by DOE O 442.2.

  6. A Bibliography of Professional Military Education

    E-Print Network [OSTI]

    Independent Study of Joint Officer Management and Joint Professional Military Education. McLean, VA: Booz, Allen & Hamilton, 2003. Israel, Steve. Report of the Proceedings: Conference on Military Education

  7. Optimizing Organ Allocation and Acceptance OGUZHAN ALAGOZ

    E-Print Network [OSTI]

    Schaefer, Andrew

    it is transplanted is called the cold ischemia time (CIT). During this time, organs are bathed in storage solutions J. SCHAEFER Departments of Industrial Engineering and Medicine University of Pittsburgh Pittsburgh of Transplant Recipients states that the acceptable cold ischemia time limit for a liver is 12 to 18 hours [22

  8. Nevada National Security Site Waste Acceptance Criteria

    SciTech Connect (OSTI)

    NSTec Environmental Management

    2012-02-28T23:59:59.000Z

    This document establishes the U.S. Department of Energy (DOE), National Nuclear Security Administration Nevada Site Office (NNSA/NSO), Nevada National Security Site Waste Acceptance Criteria (NNSSWAC). The NNSSWAC provides the requirements, terms, and conditions under which the Nevada National Security Site (NNSS) will accept DOE non-radioactive classified waste, DOE non-radioactive hazardous classified waste, DOE low-level radioactive waste (LLW), DOE mixed low-level waste (MLLW), and U.S. Department of Defense (DOD) classified waste for permanent disposal. Classified waste is the only waste accepted for disposal that may be non-radioactive and will be required to meet the waste acceptance criteria for radioactive waste as specified in this document. The NNSA/NSO and support contractors are available to assist you in understanding or interpreting this document. For assistance, please call the NNSA/NSO Waste Management Project (WMP) at (702) 295-7063, and your call will be directed to the appropriate contact.

  9. Nevada National Security Site Waste Acceptance Criteria

    SciTech Connect (OSTI)

    none,

    2013-06-01T23:59:59.000Z

    This document establishes the U.S. Department of Energy (DOE), National Nuclear Security Administration Nevada Field Office (NNSA/NFO), Nevada National Security Site Waste Acceptance Criteria (NNSSWAC). The NNSSWAC provides the requirements, terms, and conditions under which the Nevada National Security Site (NNSS) will accept the following: ? DOE hazardous and non-hazardous non-radioactive classified waste ? DOE low-level radioactive waste (LLW) ? DOE mixed low-level waste (MLLW) ? U.S. Department of Defense (DOD) classified waste The LLW and MLLW listed above may also be classified waste. Classified waste is the only waste accepted for disposal that may be non-radioactive and shall be required to meet the waste acceptance criteria for radioactive waste as specified in this document. Classified waste may be sent to the NNSS as classified matter. Section 3.1.18 provides the requirements that must be met for permanent burial of classified matter. The NNSA/NFO and support contractors are available to assist the generator in understanding or interpreting this document. For assistance, please call the NNSA/NFO Environmental Management Operations (EMO) at (702) 295-7063, and the call will be directed to the appropriate contact.

  10. W-087 Acceptance test procedure. Revision 1

    SciTech Connect (OSTI)

    Joshi, A.W.

    1997-06-10T23:59:59.000Z

    This Acceptance Test Procedure/Operational Test Procedure (ATP/OTP) has been prepared to demonstrate that the Electrical/Instrumentation and Mechanical systems function as required by project criteria and to verify proper operation of the integrated system including the interlocks.

  11. THESIS/DISSERTATION ACCEPTANCE AND DEPOSIT FORM

    E-Print Network [OSTI]

    Mills, Allen P.

    THESIS/DISSERTATION ACCEPTANCE AND DEPOSIT FORM Name: Student ID: Future Employment: (ex.: Asst Spring Summer Year: Title of Thesis/Dissertation: I authorize the library of the University of California, Riverside to use or duplicate my thesis/dissertation whenever the University Library is approached

  12. Clinical Practice Guidelines The purpose of these Clinical Practice Guidelines is to make accessible to all health care

    E-Print Network [OSTI]

    use · Allowable Values o Yes #12;Clinical Practice Guidelines o No · Performance Measure o AdultClinical Practice Guidelines The purpose of these Clinical Practice Guidelines is to make for any patient that interfaces with a healthcare delivery system. National Core Measures In-patient Joint

  13. Leadership guidelines of JGU The purpose of these general leadership guidelines is to create a shared basic understanding of

    E-Print Network [OSTI]

    Kaus, Boris

    Leadership guidelines of JGU The purpose of these general leadership guidelines is to create a shared basic understanding of leadership in our university. These guidelines set standards for leadership conduct and represent the framework conditions for the use of leadership instruments. These general

  14. Analysis of Professional Agrichemical Sales Internship 

    E-Print Network [OSTI]

    Chesson, Jason Lee

    1996-01-01T23:59:59.000Z

    Record of Study ANALYSIS OF PROFESSIONAL AGRICHEMICAL SALES INTERNSHIP A PROFESSIONAL PAPER by Jason Lee Chesson Submitted to the College of Agriculture and Life Sciences of Texas ARM University in partial fulfillment of the requirements..., and Don Reed for going out of your way to make my internship a positive learning experience. I would especially like to thank all the professors, secretaries, and staff members at Texas A&M University for the care and patience that you unselfishly...

  15. STATE OF CALIFORNIA AUTOMATIC DAYLIGHTING CONTROL ACCEPTANCE DOCUMENT

    E-Print Network [OSTI]

    STATE OF CALIFORNIA AUTOMATIC DAYLIGHTING CONTROL ACCEPTANCE DOCUMENT CEC-LTG-3A (Revised 07/10) CALIFORNIA ENERGY COMMISSION CERTIFICATE OF ACCEPTANCE LTG-3A Automatic Daylighting Control Acceptance fraction of rated light output. #12;STATE OF CALIFORNIA AUTOMATIC DAYLIGHTING CONTROL ACCEPTANCE DOCUMENT

  16. Acceptance test procedure for the overview video camera system (OVS)

    SciTech Connect (OSTI)

    Pardini, A.F.

    1995-10-01T23:59:59.000Z

    Acceptance Test Procedure for testing the Light Duty Utility Arm (LDUA) Overview Video Camera System (OVS).

  17. In a few instances, Chicago guidelines are different from those required for NPS theses, dissertations, MBA reports and joint applied projects. For those particular documents, we recommend that you

    E-Print Network [OSTI]

    9/14/2011 In a few instances, Chicago guidelines are different from those required for NPS theses is acceptable. Indent first line as you would a paragraph and set subsequent lines flush left. Single space within and between citations. B = Bibliography. Set the first line flush left and indent subsequent lines

  18. Nevada test site waste acceptance criteria

    SciTech Connect (OSTI)

    NONE

    1996-09-01T23:59:59.000Z

    This document provides the requirements, terms, and conditions under which the Nevada Test Site (NTS) will accept low-level radioactive and mixed waste for disposal; and transuranic and transuranic mixed waste for interim storage at the NTS. Review each section of this document. This document is not intended to include all of the requirements; rather, it is meant as a guide toward meeting the regulations. All references in this document should be observed to avoid omission of requirements on which acceptance or rejection of waste will be based. The Department of Energy/Nevada Operations Office (DOE/NV) and support contractors are available to assist you in understanding or interpreting this document.

  19. Nevada National Security Site Waste Acceptance Criteria

    SciTech Connect (OSTI)

    NSTec Environmental Management

    2010-09-03T23:59:59.000Z

    This document establishes the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office (NNSA/NSO) Nevada National Security Site Waste Acceptance Criteria (NNSSWAC). The NNSSWAC provides the requirements, terms, and conditions under which the Nevada National Security Site (NNSS) will accept low-level radioactive waste and mixed low-level waste for disposal. The NNSSWAC includes requirements for the generator waste certification program, characterization, traceability, waste form, packaging, and transfer. The criteria apply to radioactive waste received at the NNSS Area 3 and Area 5 Radioactive Waste Management Complex for disposal. The NNSA/NSO and support contractors are available to assist you in understanding or interpreting this document. For assistance, please call the NNSA/NSO Waste Management Project at (702) 295-7063 or fax to (702) 295-1153.

  20. Nevada National Security Site Waste Acceptance Criteria

    SciTech Connect (OSTI)

    NSTec Environmental Management

    2011-01-01T23:59:59.000Z

    This document establishes the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office (NNSA/NSO) Nevada National Security Site Waste Acceptance Criteria (NNSSWAC). The NNSSWAC provides the requirements, terms, and conditions under which the Nevada National Security Site (NNSS) will accept low-level radioactive waste and mixed low-level waste for disposal. The NNSSWAC includes requirements for the generator waste certification program, characterization, traceability, waste form, packaging, and transfer. The criteria apply to radioactive waste received at the NNSS Area 3 and Area 5 Radioactive Waste Management Complex for disposal. The NNSA/NSO and support contractors are available to assist you in understanding or interpreting this document. For assistance, please call the NNSA/NSO Waste Management Project at (702) 295-7063 or fax to (702) 295-1153.

  1. Breathing air trailer acceptance test report

    SciTech Connect (OSTI)

    Kostelnik, A.J.

    1996-02-12T23:59:59.000Z

    This Acceptance Test Report documents compliance with the requirements of specification WHC-S-0251, Rev.0 and ECNs 613530 and 606113. The equipment was tested according to WHC-SD-WM-ATP-104. The equipment tested is a Breathing Air Supply Trailer purchased as a design and fabrication procurement activity. The ATP was written by the Seller and was performed by the Seller with representatives of the Westinghouse Hanford Company witnessing portions of the test at the Seller`s location.

  2. Acceptance Criteria Framework for Autonomous Biological Detectors

    SciTech Connect (OSTI)

    Dzenitis, J M

    2006-12-12T23:59:59.000Z

    The purpose of this study was to examine a set of user acceptance criteria for autonomous biological detection systems for application in high-traffic, public facilities. The test case for the acceptance criteria was the Autonomous Pathogen Detection System (APDS) operating in high-traffic facilities in New York City (NYC). However, the acceptance criteria were designed to be generally applicable to other biological detection systems in other locations. For such detection systems, ''users'' will include local authorities (e.g., facility operators, public health officials, and law enforcement personnel) and national authorities [including personnel from the Department of Homeland Security (DHS), the BioWatch Program, the Centers for Disease Control and Prevention (CDC), and the Federal Bureau of Investigation (FBI)]. The panel members brought expertise from a broad range of backgrounds to complete this picture. The goals of this document are: (1) To serve as informal guidance for users in considering the benefits and costs of these systems. (2) To serve as informal guidance for developers in understanding the needs of users. In follow-up work, this framework will be used to systematically document the APDS for appropriateness and readiness for use in NYC.

  3. Course helps professionals develop watershed protection plans: Texas water resources professionals gather 

    E-Print Network [OSTI]

    Jensen, Ric

    2008-01-01T23:59:59.000Z

    tx H2O | pg. 6 Story by Ric Jensen Course helps professionals develop watershed protection plans | pg. 6 tx H2O | pg. 7 W ater resources professionals wanting training on watershed protection plan development are benefiting from a course...

  4. CNSLG_ProfessionalOutcomes_021114.docx Counseling Program Professional Outcomes through AY13

    E-Print Network [OSTI]

    Hayden, Nancy J.

    CNSLG_ProfessionalOutcomes_021114.docx Counseling Program Professional Outcomes ­ through AY13 the Clinical Mental Health Track, and three completing requirements for both School Counseling and Clinical Mental Health. Degrees Awarded, GPA Academic Year School Counseling Completers Clinical Mental Health

  5. Rivier College CS699 Professional Seminar

    E-Print Network [OSTI]

    Riabov, Vladimir V.

    of contents, and other project related materials (see above). Good luck, Professor Riabov #12; class, There are some guidelines related to the final project: The project presentations should include: = title of the project; = introduction; = functional specifications; = system design approach; = if you

  6. Modeling of a Parabolic Trough Solar Field for Acceptance Testing: A Case Study

    SciTech Connect (OSTI)

    Wagner, M. J.; Mehos, M. S.; Kearney, D. W.; McMahan, A. C.

    2011-01-01T23:59:59.000Z

    As deployment of parabolic trough concentrating solar power (CSP) systems ramps up, the need for reliable and robust performance acceptance test guidelines for the solar field is also amplified. Project owners and/or EPC contractors often require extensive solar field performance testing as part of the plant commissioning process in order to ensure that actual solar field performance satisfies both technical specifications and performance guaranties between the involved parties. Performance test code work is currently underway at the National Renewable Energy Laboratory (NREL) in collaboration with the SolarPACES Task-I activity, and within the ASME PTC-52 committee. One important aspect of acceptance testing is the selection of a robust technology performance model. NREL1 has developed a detailed parabolic trough performance model within the SAM software tool. This model is capable of predicting solar field, sub-system, and component performance. It has further been modified for this work to support calculation at subhourly time steps. This paper presents the methodology and results of a case study comparing actual performance data for a parabolic trough solar field to the predicted results using the modified SAM trough model. Due to data limitations, the methodology is applied to a single collector loop, though it applies to larger subfields and entire solar fields. Special consideration is provided for the model formulation, improvements to the model formulation based on comparison with the collected data, and uncertainty associated with the measured data. Additionally, this paper identifies modeling considerations that are of particular importance in the solar field acceptance testing process and uses the model to provide preliminary recommendations regarding acceptable steady-state testing conditions at the single-loop level.

  7. Condensate polishing guidelines for PWR and BWR plants

    SciTech Connect (OSTI)

    Robbins, P.; Crinigan, P.; Graham, B.; Kohlmann, R.; Crosby, C.; Seager, J.; Bosold, R.; Gillen, J.; Kristensen, J.; McKeen, A.; Jones, V.; Sawochka, S.; Siegwarth, D.; Keeling, D.; Polidoroff, T.; Morgan, D.; Rickertsen, D.; Dyson, A.; Mills, W.; Coleman, L.

    1993-03-01T23:59:59.000Z

    Under EPRI sponsorship, an industry committee, similar in form and operation to other guideline committees, was created to develop Condensate Polishing Guidelines for both PWR and BWR systems. The committee reviewed the available utility and water treatment industry experience on system design and performance and incorporated operational and state-of-the-art information into document. These guidelines help utilities to optimize present condensate polisher designs as well as be a resource for retrofits or new construction. These guidelines present information that has not previously been presented in any consensus industry document. The committee generated guidelines that cover both deep bed and powdered resin systems as an integral part of the chemistry of PWR and BWR plants. The guidelines are separated into sections that deal with the basis for condensate polishing, system design, resin design and application, data management and performance and management responsibilities.

  8. Guidelines for Writing Learning Objectives CALS Curriculum Committee

    E-Print Network [OSTI]

    Jawitz, James W.

    significant historical events to their impact on consumer acceptance of foods containing genetically modified

  9. Effectiveness of guidelines for retiming signalized diamond interchanges

    E-Print Network [OSTI]

    Irvine, Yvonne Denise

    1991-01-01T23:59:59.000Z

    powerful for studying the effect the use of diamond interchange guidelines had on test scores (17). For this experiment, a 95% confidence level was used to control a Type I error. The covariable is also referred to as the concomitant variable (+I...: Dr. Daniel B. Fambro This thesis documents the results of testing the effectiveness of guidelines for retiming signalized diamond interchanges. Two problems were addressed: how to measure benefits gained by use of the guidelines and, how to locate...

  10. An economic approach to acceptance sampling 

    E-Print Network [OSTI]

    Ruth, Robert Justin

    1973-01-01T23:59:59.000Z

    AN ECONOMIC APPROACH TO ACCEPTANCE SAMPLING A Thesis by ROBERT JUSTIN RUTH Subm1tted to the Graduate College of Texas AkM University in Partial fulfillment of the requirement for the degree of MASTER OP SCIENCE May 1973 Ma)or Sub...)sot~ Industrial Eng1neer1ng FOREWORD The research discussed in this thesis was accomplished as part of 'the Product/Production Engineering Graduate Program conducted jointly y USAMC Intern Training Center and Texas A8M University. As such, the , deas...

  11. W-026, acceptance test report manipulator system

    SciTech Connect (OSTI)

    Watson, T.L.

    1997-04-15T23:59:59.000Z

    The purpose of the WRAP Manipulator System Acceptance Test Plan (ATP) is to verify that the 4 glovebox sets of WRAP manipulator components, including rail/carriage, slave arm, master controller and auxiliary equipment, meets the requirements of the functional segments of 14590 specification. The demonstration of performance elements of the ATP are performed as a part of the Assembly specifications. Manipulator integration is integrated in the performance testing of the gloveboxes. Each requirement of the Assembly specification will be carried out in conjunction with glovebox performance tests.

  12. Wind Energy Community Acceptance | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghuraji Agro IndustriesTown ofNationwideWTEDBird,Wilsonville, Oregon: EnergyWind Energy AlaskaAcceptance

  13. Now Accepting Applications for Alvarez Fellowship!

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC)Integrated CodesTransparencyDOE Project TapsDOE Directives,838 November 8Now Accepting

  14. Sandia Software Guidelines, Volume 2. Documentation

    SciTech Connect (OSTI)

    NONE

    1995-09-01T23:59:59.000Z

    This volume is one in a series of Sandia Software Guidelines intended for use in producing quality software within Sandia National Laboratories. In consonance with the IEEE Standards for software documentation, this volume provides guidance in the selection of an adequate document set for a software project and example formats for many types of software documentation. A tutorial on life cycle documentation is also provided. Extended document thematic outlines and working examples of software documents are available on electronic media as an extension of this volume.

  15. Strategy Guideline: High Performance Residential Lighting

    SciTech Connect (OSTI)

    Holton, J.

    2012-02-01T23:59:59.000Z

    The Strategy Guideline: High Performance Residential Lighting has been developed to provide a tool for the understanding and application of high performance lighting in the home. The high performance lighting strategies featured in this guide are drawn from recent advances in commercial lighting for application to typical spaces found in residential buildings. This guide offers strategies to greatly reduce lighting energy use through the application of high quality fluorescent and light emitting diode (LED) technologies. It is important to note that these strategies not only save energy in the home but also serve to satisfy the homeowner's expectations for high quality lighting.

  16. Document management guidelines for distributed project networks

    E-Print Network [OSTI]

    Hameri, A P; Høimyr, Nils-Joar

    1999-01-01T23:59:59.000Z

    This paper provides the project engineer with guidelines or a checklist on tasks that must be considered, defined and documented before the project can successfully implement a document management system in geographically distributed project environment. Topics ranging from configuration management, approval process, document types, user administration and document naming are covered. The underlying cases of the paper are that of CERN (European Laboratory for Particle Physics) and its latest accelerator project, together with the Nordisk Industrifond -funded Connecting Distributed Competencies (NI#: 98082) project, with a focus on distributed shipbuilding processes. Keywords: distributed project management, product data management, networking, document management, virtual workspaces

  17. Measure Guideline: Hybrid Foundation Insulation Retrofits

    SciTech Connect (OSTI)

    Ueno, K.; Lstiburek, J.

    2012-05-01T23:59:59.000Z

    This measure guideline provides recommendations for designs and variations for retrofit hybrid assemblies in improving interior foundation insulation and water management of basements. Variations include closed cell spray foam (ccSPF) with membrane waterproofing or air gap membrane drainage layers, rigid board foam insulation at flat walls (cast concrete or CMU block), a 'partial drainage' detail making use of the bulk water drainage that occurs through the field of a rubble stone wall, and non-drained spray foam assemblies (including slab insulation).

  18. Screening Tools and Guidelines | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnualProperty Edit with form HistoryRistma AG Jump638324°,Schnell ZTools and Guidelines Jump to:

  19. quality guidelines | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of ScienceandMesa del SolStrengtheningWildfires mayYuan T.External LinksDougPowerquality guidelines

  20. Guidelines for Estimating Unmetered Landscapting Water Use

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't YourTransport(Fact Sheet), GeothermalGrid Integration0-1 March 2013Energy Guidelines

  1. Guidelines for the Competition - EERE Commercialization Office

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville Power AdministrationField8,Dist.NewofGeothermal Heaton Armed- DeepGuideLaboratoryGuidelines

  2. CRAD, Criteria and Guidelines For the Assessment of Safety System...

    Energy Savers [EERE]

    and Guidelines For the Assessment of Safety System Software and Firmware at Defense Nuclear Facilities Performance Objective: The purpose and scope of this CRAD is to provide...

  3. antihyperglycemic treatment guidelines: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Management; Ruth M. Davis 6 Proposal for Guidelines for the Treatment of Vitiligo in Croatia CiteSeer Summary: Abstract: Vitiligo, an acquired depigmentation disorder, because of...

  4. Draft Revised Guidelines for Implementing Executive Order 11988...

    Energy Savers [EERE]

    FEMADraftImplementingGuidelines.pdf More Documents & Publications Federal Flood Risk Management Standard EO 13690: Establishing a Federal Flood Risk Management Standard...

  5. Energy Design Guidelines for High Performance Schools: Hot and...

    Energy Savers [EERE]

    Climates Energy Design Guidelines for High Performance Schools: Hot and Humid Climates School districts around the country are finding that the smart energy choices can help them...

  6. Guidelines for the Protection of Surface and Groundwater Resources...

    Open Energy Info (EERE)

    During Exploration Drilling Jump to: navigation, search OpenEI Reference LibraryAdd to library Report: Guidelines for the Protection of Surface and Groundwater Resources During...

  7. Guidelines to Consider for Participating in the Alternative Licensing...

    Open Energy Info (EERE)

    Guidelines to Consider for Participating in the Alternative Licensing Process Jump to: navigation, search OpenEI Reference LibraryAdd to library PermittingRegulatory Guidance -...

  8. Guidelines for Engineering, Design, and Inspection Costs - DOE...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    5, Guidelines for Engineering, Design, and Inspection Costs by John Makepeace Functional areas: Construction and Engineering, Project Management Engineering, design, and inspection...

  9. Guidelines for Provision and Interchange of Geothermal Data Assets

    Broader source: Energy.gov [DOE]

    This document presents guidelines related to provision and interchange of data assets in the context of the National Geothermal Data System.

  10. M&V Guidelines: Measurement and Verification for Federal Energy...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    responsibility for achieving savings related to equipment performance. Operations, preventive maintenance, and repair and FEMP M&V Guidelines 3.0 3-1 replacement practices...

  11. Facility Energy Management Guidelines and Criteria for Energy...

    Broader source: Energy.gov (indexed) [DOE]

    Guidelines and criteria describe meeting requirements within Section 432 of the Energy Independence and Security Act of 2007 (EISA 2007), including defining facilities covered by...

  12. Quality Management System Guidelines - Building America Top Innovation...

    Energy Savers [EERE]

    (PHI) created custom quality management system guidelines for the design and construction of high performance homes, earning a 2013 Top Innovation award for their efforts....

  13. SFR Safety Guidelines, Safety Policies and Guidelines for School of Forest Resources Personnel

    E-Print Network [OSTI]

    Thomas, Andrew

    (annual) c. Emergency action plans: all employees (annual) d. Chemical hygiene plan (CHP): all employees with chemicals and/or pesticides (including with CHP training) m. Chemical spill (lab and field ­ all users in Nutting Hall: 1. Fire 2. Chemical spills (see laboratory CHP for spill guidelines and policies) b. If your

  14. Towards Controlling the Acceptance Factors for a Collaborative Platform in

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Towards Controlling the Acceptance Factors for a Collaborative Platform in Engineering Design factor which are supposed to influence future users of a collaborative KM platform (Dimocode). At the end management systems (KMS) deployment. Keywords: acceptance factors, collaborative, platforms, engineering

  15. A ROADMAP FOR TECHNOLOGY ENHANCED PROFESSIONAL

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    A ROADMAP FOR TECHNOLOGY ENHANCED PROFESSIONAL LEARNING (TEPL) Network of Excellence for engaging themselves in open and constructive dialogue with the Roadmapping team and for their contributions to various Roadmapping events - Richard Straub, IBM, Richard Straub Secretary-General ELIG, France - Fabrizio

  16. Professional Education UNIVERSITY DISSERTATION FELLOW AWARD

    E-Print Network [OSTI]

    Firestone, Jeremy

    Graduate & Professional Education UNIVERSITY DISSERTATION FELLOW AWARD 2015-2016 NOmINATION FORm Dissertation Fellow Award. The award is established by the Office of the Provost to enable and support Ph.D. students to devote full-time attention to the completion of their doctoral dissertation. Students who

  17. Elizabeth Alison Thompson a. Professional Preparation

    E-Print Network [OSTI]

    Borenstein, Elhanan

    Elizabeth Alison Thompson a. Professional Preparation Instutution Major Degree Year Cambridge Proceedings 70) Five most closely related Koepke, H. A., and Thompson, E. A. (2013) Efficient identification of equivalences in dynamic graphs and pedigree structures. Journal of Computational Biology 20: 551-570. Thompson

  18. Martin P. A. Jackson Professional Summary

    E-Print Network [OSTI]

    Yang, Zong-Liang

    Martin P. A. Jackson Professional Summary July 8, 2008 Business address: The University of Texas-mail address: martin.jackson@beg.utexas.edu Publications Books, Manuals Jackson, M. P. A., Roberts, D. G, AAPG Memoir 65, 454 p. Jackson, M. P. A., Roberts, D. G., and Snelson, S., 1993, AAPG International

  19. Financial Aid Information Professional Internship Program

    E-Print Network [OSTI]

    Financial Aid Information for Professional Internship Program (HRT 493 - 3 Credits) Students who for the full summer term. Students who wish to be considered full time while on internship should request this assistance from Susan Gruber before being enrolled for internship credits. This is entirely the student

  20. FFLLOORRIIDDAA SSTTAATTEE UUNNIIVVEERRSSIITTYY NOTICE TO PROFESSIONAL CONSULTANTS

    E-Print Network [OSTI]

    Sura, Philip

    attached: 1. A completed Florida State University "Professional Qualifications Supplement," dated with, any supplier, subcontractor or consultant in excess of $50,000.00 in connection with this project Qualifications Supplement forms, descriptive project information and selection criteria may be obtained through

  1. FFLLOORRIIDDAA SSTTAATTEE UUNNIIVVEERRSSIITTYY NOTICE TO PROFESSIONAL CONSULTANTS

    E-Print Network [OSTI]

    Sura, Philip

    of application: 1. A completed Florida State University "Professional Qualifications Supplement," dated with, any supplier, subcontractor or consultant in excess of $50,000.00 in connection with this project Qualifications Supplement forms, descriptive project information, and selection criteria may be obtained through

  2. THE ENVIRONMENTAL TECHNOLOGIES ACCEPTANCE (ETA) PROGRAM

    SciTech Connect (OSTI)

    Christina B. Behr-Andres

    2001-10-01T23:59:59.000Z

    The objective of the Environmental Technologies Acceptance (ETA) Program at the Energy & Environmental Research Center (EERC) is to advance the development, commercial acceptance, and timely deployment of selected private sector technologies for the cleanup of sites in the nuclear defense complex as well as the greater market. As a result of contract changes approved by National Energy Technology Laboratory (NETL) representatives to incorporate activities previously conducted under another NETL agreement, there are now an additional task and an expansion of activities within the stated scope of work of the ETA program. As shown in Table 1, this cooperative agreement, funded by NETL (No. DE-FC26-00NT40840), consists of four tasks: Technology Selection, Technology Development, Technology Verification, and System Engineering. As currently conceived, ETA will address the needs of as many technologies as appropriate under its current 3-year term. There are currently four technical subtasks: Long-Term Stewardship Initiative at the Mound Plant Site; Photocatalysis of Mercury-Contaminated Water; Subcritical Water Treatment of PCB and Metal-Contaminated Paint Waste; and Vegetative Covers for Low-Level Waste Repositories. This report covers activities during the second six months of the three-year ETA program.

  3. STATE OF CALIFORNIA DISTRIBUTED ENERGY STORAGE DX AC SYSTEMES ACCEPTANCE

    E-Print Network [OSTI]

    STATE OF CALIFORNIA DISTRIBUTED ENERGY STORAGE DX AC SYSTEMES ACCEPTANCE CEC-MECH-14A (Revised 08/09) CALIFORNIA ENERGY COMMISSION CERTIFICATE OF ACCEPTANCE MECH-14A NA7.5.13 Distributed Energy Storage DX AC DISTRIBUTED ENERGY STORAGE DX AC SYSTEMES ACCEPTANCE CEC-MECH-14A (Revised 08/09) CALIFORNIA ENERGY COMMISSION

  4. STATE OF CALIFORNIA THERMAL ENERGY STORAGE (TES) SYSTEM ACCEPTANCE

    E-Print Network [OSTI]

    STATE OF CALIFORNIA THERMAL ENERGY STORAGE (TES) SYSTEM ACCEPTANCE CEC-MECH-15A (Revised 07/10) CALIFORNIA ENERGY COMMISSION CERTIFICATE OF ACCEPTANCE MECH-15A NA7.5.14 Thermal Energy Storage (TES) System THERMAL ENERGY STORAGE (TES) SYSTEM ACCEPTANCE CEC-MECH-15A (Revised 07/10) CALIFORNIA ENERGY COMMISSION

  5. STATE OF CALIFORNIA DEMAND CONTROL VENTILATION SYSTEMS ACCEPTANCE

    E-Print Network [OSTI]

    STATE OF CALIFORNIA DEMAND CONTROL VENTILATION SYSTEMS ACCEPTANCE CEC-MECH-6A (Revised 08/09) CALIFORNIA ENERGY COMMISSION CERTIFICATE OF ACCEPTANCE MECH-6A NA7.5.5 Demand Control Ventilation Systems DEMAND CONTROL VENTILATION SYSTEMS ACCEPTANCE CEC-MECH-6A (Revised 08/09) CALIFORNIA ENERGY COMMISSION

  6. Social Acceptance of Wind: A Brief Overview (Presentation)

    SciTech Connect (OSTI)

    Lantz, E.

    2015-01-01T23:59:59.000Z

    This presentation discusses concepts and trends in social acceptance of wind energy, profiles recent research findings, and discussions mitigation strategies intended to resolve wind power social acceptance challenges as informed by published research and the experiences of individuals participating in the International Energy Agencies Working Group on Social Acceptance of Wind Energy

  7. ForPeerReview PUBLIC ACCEPTANCE OF OFFSHORE WIND POWER

    E-Print Network [OSTI]

    Firestone, Jeremy

    ForPeerReview PUBLIC ACCEPTANCE OF OFFSHORE WIND POWER PROJECTS IN THE UNITED STATES Journal: Wind, Andrew; Minerals Management Service Keywords: offshore wind power, public opinion, social acceptancePeerReview 1 PUBLIC ACCEPTANCE OF OFFSHORE WIND POWER PROJECTS IN THE UNITED STATES Jeremy Firestone*, Willett

  8. Measure Guideline: Guide to Attic Air Sealing

    SciTech Connect (OSTI)

    Lstiburek, J.

    2014-09-01T23:59:59.000Z

    The Guide to Attic Air Sealing was completed in 2010 and although not in the standard Measure Guideline format, is intended to be a Measure Guideline on Attic Air Sealing. The guide was reviewed during two industry stakeholders meetings held on December 18th, 2009 and January 15th, 2010, and modified based on the comments received. Please do not make comments on the Building America format of this document. The purpose of the Guide to Attic Air Sealing is to provide information and recommendations for the preparation work necessary prior to adding attic insulation. Even though the purpose of this guide is to save energy - health, safety and durability should not be compromised by energy efficiency. Accordingly, combustion safety and ventilation for indoor air quality are addressed first. Durability and attic ventilation then follow. Finally, to maximize energy savings, air sealing is completed prior to insulating. The guide is intended for home remodelers, builders, insulation contractors, mechanical contractors, general contractors who have previously done remodeling and homeowners as a guide to the work that needs to be done.

  9. Course helps professionals develop watershed protection plans: Texas water resources professionals gather

    E-Print Network [OSTI]

    Jensen, Ric

    2008-01-01T23:59:59.000Z

    tx H2O | pg. 6 Story by Ric Jensen Course helps professionals develop watershed protection plans | pg. 6 tx H2O | pg. 7 W ater resources professionals wanting training on watershed protection plan development are benefiting from a course... Casebolt of Texas State Soil and Water Conservation Board, Lucas Gregory of Texas Water Resources Institute, Vanessa Escobar of the Texas Water Development Board, and Ernest Moran of the San Antonio River Author- ity calculate load duration curves...

  10. Spatial Generalization in Operant Learning: Lessons from Professional Basketball

    E-Print Network [OSTI]

    Spatial Generalization in Operant Learning: Lessons from Professional Basketball Tal Neiman1: Neiman T, Loewenstein Y (2014) Spatial Generalization in Operant Learning: Lessons from Professional, Israel Abstract In operant learning, behaviors are reinforced or inhibited in response

  11. MARQUETTE UNIVERSITY GRADUATE SCHOOL MASTER'S THESIS / ESSAY / PROFESSIONAL PROJECT /

    E-Print Network [OSTI]

    Sanders, Matthew

    MARQUETTE UNIVERSITY GRADUATE SCHOOL MASTER'S THESIS / ESSAY / PROFESSIONAL PROJECT / PUBLICATION: SIGNATURES Committee Member: Committee Member: Committee Member: Committee Member: FOR GRADUATE SCHOOL USE of the Master's Thesis / Essay / Professional Project / Publication. PLEASE FORWARD COMPLETED FORM

  12. Professional, Applied & Continuing Education INFORMATION ASSURANCE & SECURITY CERTIFICATE

    E-Print Network [OSTI]

    Martin, Jeff

    Professional, Applied & Continuing Education INFORMATION ASSURANCE & SECURITY CERTIFICATE Demand for technical security and information assurance professionals has risen dramatically in recent years OPPORTUNITIES: TUITION: Required Courses (78 Hours): · Information Assurance and Security Level 1: Information

  13. Business Expense Guidelines Page 1 Revision date: 12-06-12 Caltech Business Expense Guidelines Rev 01-04-13.doc

    E-Print Network [OSTI]

    Bruck, Jehoshua (Shuki)

    Business Expense Guidelines Page 1 Revision date: 12-06-12 Caltech Business Expense Guidelines Rev 01-04-13.doc California Institute of Technology BUSINESS EXPENSE GUIDELINES Office of Financial Services March 2003 Revised January, 2013 #12;Business Expense Guidelines Page 2 Caltech Business Expense

  14. Grazing function g and collimation angular acceptance

    E-Print Network [OSTI]

    Peggs, Stephen G

    2009-01-01T23:59:59.000Z

    The grazing function g is introduced—a synchrobetatron optical quantity that is analogous (and closely connected) to the Twiss and dispersion functions ?, ?, ?, and ??. It parametrizes the rate of change of total angle with respect to synchrotron amplitude for grazing particles, which just touch the surface of an aperture when their synchrotron and betatron oscillations are simultaneously (in time) at their extreme displacements. The grazing function can be important at collimators with limited acceptance angles. For example, it is important in both modes of crystal collimation operation—in channeling and in volume reflection. The grazing function is independent of the collimator type—crystal or amorphous—but can depend strongly on its azimuthal location. The rigorous synchrobetatron condition g=0 is solved, by invoking the close connection between the grazing function and the slope of the normalized dispersion. Propagation of the grazing function is described, through drifts, dipoles, and quadr...

  15. Stakeholder acceptance analysis ResonantSonic drilling

    SciTech Connect (OSTI)

    Peterson, T. [Battelle Seattle Research Center, WA (United States)

    1995-12-01T23:59:59.000Z

    This report presents evaluations, recommendations, and requirements concerning ResonantSonic Drilling (Sonic Drilling), derived from a three-year program of stakeholder involvement. Sonic Drilling is an innovative method to reach contamination in soil and groundwater. The resonant sonic drill rig uses counter-rotating weights to generate energy, which causes the drill pipe to vibrate elastically along its entire length. In the resonant condition, forces of up to 200,000 pounds are transmitted to the drill bit face to create a cutting action. The resonant energy causes subsurface materials to move back into the adjacent formation, permitting the drill pipe to advance. This report is for technology developers and those responsible for making decisions about the use of technology to remediate contamination by volatile organic compounds. Stakeholders` perspectives help those responsible for technology deployment to make good decisions concerning the acceptability and applicability of sonic drilling to the remediation problems they face.

  16. Honeywell Modular Automation System Acceptance Test Procedure

    SciTech Connect (OSTI)

    STUBBS, A.M.

    1999-09-21T23:59:59.000Z

    The purpose of this Acceptance Test Procedure (ATP) is to verify the operability of the three new furnaces as controlled by the new Honeywell Modular Automation System (MAS). The Honeywell MAS is being installed in PFP to control the three thermal stabilization furnaces in glovebox HA-211. The ATP provides instructions for testing the configuration of the Honeywell MAS at the Plutonium Finishing Plant(PFP). The test will be a field test of the analog inputs, analog outputs, and software interlocks. The interlock test will check the digital input and outputs. Field equipment will not be connected forth is test. Simulated signals will be used to test thermocouple, limit switch, and vacuum pump inputs to the PLUMAS.

  17. INTERNSHIP COMMITMENT FORM Master of Professional Science (MPS)

    E-Print Network [OSTI]

    Miami, University of

    1 INTERNSHIP COMMITMENT FORM Master of Professional Science (MPS) Student Name: _______________________________________________________ Internship Organization: __________________________________ Address: ________________________________________ Internship Supervisor: ______________________________________________ E-Mail: ______________________ Phone

  18. INTERNSHIP COMMITMENT FORM Master of Professional Science (MPS)

    E-Print Network [OSTI]

    Miami, University of

    1 INTERNSHIP COMMITMENT FORM Master of Professional Science (MPS) STUDENT:______________________________________________________ _____________________________________________________________ Organization Website: ___________________________________________ INTERNSHIP SUPERVISOR: __________________________________________ E-Mail: ______________________________________ Phone: __________________________ INTERNSHIP DETAILS

  19. University of Pittsburgh FINANCIAL GUIDELINE Subject: Allowability of Costs

    E-Print Network [OSTI]

    Sibille, Etienne

    University of Pittsburgh FINANCIAL GUIDELINE Subject: Allowability of Costs I. Scope This guideline establishes the requirements for determining the allowability of direct and indirect costs on the financial to ensure the allowability of the direct and indirect costs recorded on their sponsored projects

  20. UCT Finance Guidelines fg004_catering Page 1 of 2

    E-Print Network [OSTI]

    Jarrett, Thomas H.

    UCT Finance Guidelines fg004_catering Page 1 of 2 Finance Department, UCT, Private Bag, Rondebosch, educating for life and addressing the challenges facing our society." Finance Guideline FG004 ­ Catering at UCT meetings and events Related Finance Policy GEN001 ­ Funds deposited with or held by UCT Objective

  1. Computer Replacement Guidelines Environmental Health and Safety, Stanford University

    E-Print Network [OSTI]

    Computer Replacement Guidelines Environmental Health and Safety, Stanford University 17 November 2005 This document describes the guidelines for replacing laptop and desktop computers at Environmental Health and Safety. PC laptop and desktop computers will be replaced a) on an ongoing basis where

  2. Guidelines for Final Camera-Ready Manuscripts and XXX ZZZ

    E-Print Network [OSTI]

    Tachizawa, Kazuya

    Guidelines for Final Camera-Ready Manuscripts XXX YYY* and XXX ZZZ * Department of Information to the directions reported in this document. I. INTRODUCTION This document shows guidelines for preparing a final.45 in). The space between the two columns is 4mm (0.17 in). Paragraph indentation is 3.5 mm (0.14 in). D

  3. Departmental Guidelines on Plagiarism What is meant by plagiarism?

    E-Print Network [OSTI]

    Crowther, Paul

    Departmental Guidelines on Plagiarism What is meant by plagiarism? Plagiarism is basically the attempt to pass off someone else's work as your own. The University guidelines define as plagiarised work marks or by setting off the text in some way (indentation, different type size, different font

  4. Software development guidelines for Visual Basic and SQL Server

    SciTech Connect (OSTI)

    IBSEN, T.G.

    2000-07-26T23:59:59.000Z

    Development Guidelines are programming directions that focus not on the logic of the program but on its physical structure and appearance. These directions make the code easier to read, understand, and maintain. These guidelines are put in place to create a consistent set of conventions to follow that will standardize the development process. With these guidelines in place the readability and understanding others have when reviewing the code is greatly enhanced. Use these guidelines as a general rule when writing any set of logical statements. Development Guidelines are put into place in an effort to standardize the structure and style of the development process. They are not intended to limit or channel the developer's own creativity and flexibility. These guidelines will cover general development syntax, organization and documentation. The general information covers the high level areas of development, no matter what the environment. This guide will detail specific Visual Basic guidelines, following the same standard naming conventions set by Microsoft, with some minor additions. The guideline will finish with conventions specific to a Database or Microsoft's SQL Server specific environment.

  5. Technical Evaluation Report "FUV Detector QE Enhancement Grid Design Guidelines"

    E-Print Network [OSTI]

    Colorado at Boulder, University of

    Technical Evaluation Report "FUV Detector QE Enhancement Grid Design Guidelines" Date: October 11 Reviewed: Technical Evaluation Report Approved: "FUV Detector QE Enhancement Grid Design Guidelines" Size Code Indent No. Document No. Rev A COS-11-0008 - Scale: N/A #12;COS-11-0008 October 11, 1999 Center

  6. LCLS Proposal Review Process and Guidelines Proposal preparation

    E-Print Network [OSTI]

    Wechsler, Risa H.

    LCLS Proposal Review Process and Guidelines Proposal preparation Instructions for the proposal guidelines are posted on the LCLS user portal and website: lcls/users/proposals.html>. During the LCLS start-up phase, LCLS has and plans to continue to organize workshops focusing on the LCLS

  7. DRAFT NISTIR 7628 Revision 1 Guidelines for Smart Grid Cybersecurity

    E-Print Network [OSTI]

    DRAFT NISTIR 7628 Revision 1 Guidelines for Smart Grid Cybersecurity: Vol. 2, Privacy and the Smart Grid The Smart Grid Interoperability Panel ­ Smart Grid Cybersecurity Committee #12;DRAFT NISTIR 7628 Revision 1 Guidelines for Smart Grid Cybersecurity: Vol. 2, Privacy and the Smart Grid The Smart Grid

  8. Verification of Medical Guidelines Using Background Knowledge in Task Networks

    E-Print Network [OSTI]

    Groot, Perry

    and to formalize criteria for good medical practice that a guideline should comply with. This framework are mainly concerned with checking the general quality criteria of good medical practice that a guideline on sound scientific evidence, which has been called evidence-based medicine [1], [2]. In practice, this has

  9. GUIDELINES FOR THE IDENTIFICATION AND MANAGEMENT OF LEAD EXPOSURE IN

    E-Print Network [OSTI]

    GUIDELINES FOR THE IDENTIFICATION AND MANAGEMENT OF LEAD EXPOSURE IN PREGNANT AND LACTATING WOMEN;GUIDELINES FOR THE IDENTIFICATION AND MANAGEMENT OF LEAD EXPOSURE IN PREGNANT AND LACTATING WOMEN and Disease Registry Christopher Portier, PhD Director Healthy Homes and Lead Poisoning

  10. GLIDES PROJECT GuideLines Into DEcision Support

    E-Print Network [OSTI]

    Lee, Daeyeol

    GLIDES PROJECT GuideLines Into DEcision Support sponsored by The Agency for Healthcare Research;Topics · GLIDES 4-level "stack" ­ NarraAve guideline with quality, implementabilityLon, and local coding/linking ­ To Formal Quality Measure via QDM, eMeasure · BRIDGE

  11. FOOD GUIDELINES --WEEKLY STUDENT ORGANIZATION MEETING ONLY January 31, 2006

    E-Print Network [OSTI]

    Ponce, V. Miguel

    FOOD GUIDELINES -- WEEKLY STUDENT ORGANIZATION MEETING ONLY January 31, 2006 Student Activities, organizations with an average of fewer than 50 members and guests at their weekly meetings may serve food Shops Note: The following guidelines relate only to student organizations' on-campus weekly meetings

  12. CALIFORNIA GUIDELINES FOR REDUCING IMPACTS TO BIRDS AND BATS FROM

    E-Print Network [OSTI]

    Treaty Act, rotorswept area, wind energy, wind siting guidelines, wind turbines. #12; #12; i Guidelines for Reducing Impacts to Birds and Bats from Wind Energy Development. Commission Final Report or repowering of wind energy projects in California. They include recommendations on preliminary screening

  13. The University of Oklahoma Independent Contractor or Consultant Guidelines

    E-Print Network [OSTI]

    Oklahoma, University of

    The University of Oklahoma Independent Contractor or Consultant Guidelines Purpose .................................................................................. 7 #12;University of Oklahoma Independent Contractor Guidelines - (Revised 11/2012) pg. 2 Purpose) for the University of Oklahoma and is the result of collaboration between Human Resources and Financial Services

  14. University Policy Process Style Guidelines for University Policy Documents

    E-Print Network [OSTI]

    Jones, Michelle

    University Policy Process Style Guidelines for University Policy Documents 1 S:\\4every1\\Policy\\Univ Policy Improvement\\Final Docs\\Style Guidelines-UPP.docx Policy Name Do not include "Policy" or "Policy on specific applications such as "anyone operating university owned or operated vehicles". POLICY (required

  15. 151 SDSU Curriculum Guide 2010 Professional Certificate Programs

    E-Print Network [OSTI]

    Ponce, V. Miguel

    151 SDSU Curriculum Guide 2010 Professional Certificate Programs Definition Professional certificate programs do not carry academic credit from SDSU. However, some carry X-level pro- fessional development credit; these programs use course numbers X001 ­ X075. All professional certificate programs

  16. Office of the State Controller Code of Professional Ethics

    E-Print Network [OSTI]

    Thaxton, Christopher S.

    Office of the State Controller Code of Professional Ethics All government accounting professionals of professional conduct as set forth in this code are promulgated in order to enhance the performance of all relationships to merit the respect, trust and confidence of governing officials, other public officials

  17. Deriving cleanup guidelines for radionuclides at Brookhaven National Laboratory

    SciTech Connect (OSTI)

    Meinhold, A.F.; Morris, S.C.; Dionne, B.; Moskowitz, P.D.

    1997-01-01T23:59:59.000Z

    Past activities at Brookhaven National Laboratory (BNL) resulted in soil and groundwater contamination. As a result, BNL was designated a Superfund site under the Comprehensive Environmental Response Compensation and Liability Act (CERCLA). BNL`s Office of Environmental Restoration (OER) is overseeing environmental restoration activities at the Laboratory. With the exception of radium, there are no regulations or guidelines to establish cleanup guidelines for radionuclides in soils at BNL. BNL must derive radionuclide soil cleanup guidelines for a number of Operable Units (OUs) and Areas of Concern (AOCs). These guidelines are required by DOE under a proposed regulation for radiation protection of public health and the environment as well as to satisfy the requirements of CERCLA. The objective of this report is to propose a standard approach to deriving risk-based cleanup guidelines for radionuclides in soil at BNL. Implementation of the approach is briefly discussed.

  18. Identifying Patterns of Relationships between Professional Development and Professional Culture with Texas High School Science Teachers and Students

    E-Print Network [OSTI]

    Ruebush, Laura Elizabeth

    2012-10-19T23:59:59.000Z

    about patterns of relationships between professional culture with high school science teachers and students. PD and professional culture have been reported to increase teacher retention and student achievement. The studies presented in this dissertation...

  19. Assessment of rural energy resources; Methodological guidelines

    SciTech Connect (OSTI)

    Rijal, K.; Bansal, N.K.; Grover, P.D. (Centre for Energy Studies, Indian Inst. of Technology, Hauz Khas, New Delhi 11016 (IN))

    1990-01-01T23:59:59.000Z

    This article presents the methodological guidelines used to assess rural energy resources with an example of its application in three villages each from different physiographic zones of Nepal. Existing energy demand patterns of villages are compared with estimated resource availability, and rural energy planning issues are discussed. Economics and financial supply price of primary energy resources are compared, which provides insight into defective energy planning and policy formulation and implication in the context of rural areas of Nepal. Though aware of the formidable consequences, the rural populace continues to exhaust the forest as they are unable to find financially cheaper alternatives. Appropriate policy measures need to be devised by the government to promote the use of economically cost-effective renewable energy resources so as to change the present energy usage pattern to diminish the environmental impact caused by over exploitation of forest resources beyond their regenerative capacity.

  20. Atmospheric fluidized-bed combustion performance guidelines

    SciTech Connect (OSTI)

    Sotelo, E. (Sotelo (Ernest), Berkeley, CA (USA))

    1991-03-01T23:59:59.000Z

    Performance specifications for conventional coal-fired boilers typically call for tests to be conducted in accordance with the ASME Performance Test Code for Steam Generating Units, PTC 4.1. The Code establishes procedures for conducting performance tests primarily to determine efficiency and capacity. The current edition of the PTC 4.1 is not entirely applicable to atmospheric fluidized-bed combustion boilers, however. AFBC boilers typically are equipped with integral sulfur capture through the addition of a sorbent material along with the fuel feed to the combustor, and this new technology introduces heat losses and credits that are not described in PTC 4.1. These heat losses and credits include combustion heat loss due to the calcination of the sorbent, heat credit due to sulfation, and the effects of calcination and sulfation on the dry flue gas flow, all of which significantly affect boiler efficiency calculations. The limitations of the current issue of the PTC 4.1 is recognized and the Code is now being reviewed to include heat losses and credits common to AFBC boilers. While this work will take some time, there is an immediate need for procedures for performance testing of AFBC boilers. These Guidelines are prepared to meet that need in the interim. The Guidelines detail procedures for boiler efficiency tests. They introduce technical and economic issues that may influence the test level of detail and accuracy. Methods of identifying required measurements, selection of measurement schemes, and assessment of measured versus estimated values are presented. A case study is used to illustrate the procedures and indicate which are the major credits and losses in the efficiency of a typical AFBC boiler. 6 figs., 8 tabs.

  1. LCLS Proposal Preparation and Review Process Guidelines 10/8/11 LCLS Proposal Preparation and Review Process Guidelines

    E-Print Network [OSTI]

    Wechsler, Risa H.

    LCLS Proposal Preparation and Review Process Guidelines ­ 10/8/11 LCLS Proposal Preparation and Review Process Guidelines Proposal Preparation The technical capabilities of the LCLS are developing rapidly. LCLS operations will continue to evolve over the next few years, and we appreciate

  2. C:\\Documents and Settings\\rpriesmeyer\\My Documents\\Word\\FAMIS Purchasing Guidelines.doc FAMIS Purchasing Guidelines

    E-Print Network [OSTI]

    Behmer, Spencer T.

    C:\\Documents and Settings\\rpriesmeyer\\My Documents\\Word\\FAMIS Purchasing Guidelines.doc FAMIS Purchasing Guidelines We are now utilizing the FAMIS (Financial Accounting Information Systems) State of measure & unit price of each item) · Indicate if there is a separate charge for shipping and handling

  3. Clinical Instructor Responsibilities The APTA has detailed voluntary guidelines for clinical instructors. The guidelines are divided into six key

    E-Print Network [OSTI]

    Chisholm, Rex L.

    Clinical Instructor Responsibilities The APTA has detailed voluntary guidelines for clinical instructors. The guidelines are divided into six key areas: · Clinical competence and legal and ethical and final). Northwestern University expects clinical instructors to: 1. Possess a desire to guide students

  4. Archway Education Professional The University of Georgia is seeking a qualified candidate to serve as the Archway Education Professional in

    E-Print Network [OSTI]

    Arnold, Jonathan

    Archway Education Professional The University of Georgia is seeking a qualified candidate to serve as the Archway Education Professional in Dalton-Whitfield County, Georgia. The Archway Partnership was initiated with the University of Georgia. The Archway Education Professional is a UGA Public Service (Public Service Assistant

  5. E-Print Network 3.0 - association iuga guidelines Sample Search...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    associated costs of different care options, effectiveness of the guideline in influencing health care... uses a guideline adaptation process established by the Registered Nurses...

  6. Adherence to Head Computed Tomography Guidelines in the Setting of Mild Traumatic Brain Injury

    E-Print Network [OSTI]

    Jones, Landon A; Morley, Eric J; Grant, William D; Wojcik, Susan M; Paolo, William F

    2014-01-01T23:59:59.000Z

    Adherence to Head Computed Tomography Guidelines for Mildal Adherence to Head Computed Tomography Guidelines system,non-contrast head computed tomography (CT) in patients with

  7. Professional Development for Rural Teachers in Chile: What They Need and How Technology Can Help

    E-Print Network [OSTI]

    Perez Guarda, Paola

    2014-05-15T23:59:59.000Z

    to develop and grow professionally according to their professional context and needs. This study focuses on professional development of rural teachers in Chile. These teachers work in schools that present unique characteristics, which demand professional...

  8. ENHANCING STAKEHOLDER ACCEPTANCE OF BIOREMEDIATION TECHNOLOGIES

    SciTech Connect (OSTI)

    Focht, Will; Albright, Matt; Anex, Robert P., Jr., ed.

    2009-04-21T23:59:59.000Z

    This project inquired into the judgments and beliefs of people living near DOE reservations and facilities at Oak Ridge, Tennessee; Hanford, Washington; and Los Alamos, Tennessee about bioremediation of subsurface contamination. The purpose of the investigation was to identify strategies based on these judgments and beliefs for enhancing public support of bioremediation. Several methods were used to collect and analyze data including content analysis of transcripts of face-to-face personal interviews, factor analysis of subjective perspectives using Q methodology, and statistical analysis of results from a large-sample randomized telephone survey. Content analysis of interview transcripts identified themes about public perceptions and constructions of contamination risk, risk management, and risk managers. This analysis revealed that those who have no employment relationship at the sites and are not engaged in technical professions are most concerned about contamination risks. We also found that most interviewees are unfamiliar with subsurface contamination risks and how they can be reduced, believe they have little control over exposure, are frustrated with the lack of progress in remediation, are concerned about a lack of commitment of DOE to full remediation, and distrust site managers to act in the public interest. Concern is also expressed over frequent site management turnover, excessive secrecy, ineffective and biased communication, perceived attempts to talk the public into accepting risk, and apparent lack of concern about community welfare. In the telephone survey, we asked respondents who were aware of site contamination about their perceptions of risk from exposure to subsurface contamination. Response analysis revealed that most people believe that they are at significant risk from subsurface contamination but they acknowledge that more education is needed to calibrate risk perceptions against scientific risk assessments. Most rate their personal control over exposure as low. Slightly more than half believe that risk reduction should be balanced against cost. We also found that distrust of DOE and its contractors exists, primarily due to the perception that site managers do not share public values; hence, the public is generally unwilling to defer to DOE in its decision-making. The concomitant belief of inefficacy confounds distrust by generating frustration that DOE does not care. Moreover, the public is split with respect to trust of each other, primarily because of the belief that citizens lack technical competence. With respect to bioremediation support, we found that more than 40% of the public has no opinion. However, of those who do, 3 of 4 are favorably disposed – particularly among those who believe that risk is lower and who are more trusting of site management. We presented survey respondents with four alternative participation strategies based on the results of the Q analysis and asked their judgments of each. The public prefers strategies that shifts power to them. The least empowered strategy (feedback) was supported by 46%; support grew as public power increased, reaching 66% support for independently facilitated deliberation. More DOE distrust generates more support for high power strategies. We offer the following recommendations to enhance public acceptance. First, and perhaps most importantly, site managers should pursue robust trust-building efforts to gain public confidence in DOE risk management that meets public expectations. Public trust decreases risk perception, which increases public willingness to defer to site managers’ discretion in decision-making, which in turn increases public acceptance of the decisions that result. Second, site managers should address public concerns about bioremediation such as its effectiveness in reducing risk, performance compared to other remediation alternatives, costs compared against benefits, time required to start and complete remediation, level of risk that is currently posed by contamination, and scope of application. Third, more should be d

  9. Nevada Test Site Waste Acceptance Criteria, December 2000

    SciTech Connect (OSTI)

    NONE

    2000-12-01T23:59:59.000Z

    This document establishes the US Department of Energy, Nevada Operations Office waste acceptance criteria. The waste acceptance criteria provides the requirements, terms, and conditions under which the Nevada Test Site will accept low-level radioactive waste and mixed waste for disposal. It includes requirements for the generator waste certification program, characterization, traceability, waste form, packaging, and transfer. The criteria apply to radioactive waste received at the Nevada Test Site Area 3 and Area 5 Radioactive Waste Management Sites for storage or disposal.

  10. ORISE: Applications being accepted for 2015 spring term of DOE...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    being accepted for 2015 spring term of DOE's Science Undergraduate Laboratory Internship Program at ORNL Students have the opportunity to perform research alongside...

  11. Acceptance test report for the mobile color camera system

    SciTech Connect (OSTI)

    Castleberry, J.L., Fluor Daniel Hanford

    1997-02-27T23:59:59.000Z

    The purpose of this report is to present test data recorded during acceptance testing of the Mobile Color Camera System (MCCS).

  12. acceptable residual magnetic: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    between cultural acceptance in conjunction with social perception and cultural tourism promotion strategies. It provides a matrix to evaluate (more) Shih, I-Hsuan...

  13. acceptance apha energy: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    on Automated Deduction CADE to Automated Reasoning presented to Peter Andrews theory, mating-based theorem Andrews, Peter B. 100 ACCEPTANCE OF OFFER BASIC SCIENCE FACULTY...

  14. Anthony Thomas accepts position of Chief Scientist and Theory...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Dr. Anthony Thomas Dr. Anthony Thomas Anthony Thomas accepts position of Chief Scientist and Theory Group Leader at Jefferson Lab December 3, 2003 The Department of Energy's Thomas...

  15. acceptance model applied: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    developed based on studying details 38 Accepted Manuscript Visible Models for Interactive Pattern Recognition Engineering Websites Summary: 1 Abstract-- The exchange of information...

  16. Public Acceptance of Wind: Foundational Study Near US Wind Facilities

    Wind Powering America (EERE)

    Group * Energy Analysis and Environmental Impacts Department Public Acceptance of Wind Power Ben Hoen Lawrence Berkeley National Laboratory WindExchange Webinar June 17, 2015...

  17. Wind Power Siting: Public Acceptance and Land Use

    Wind Powering America (EERE)

    by the Alliance for Sustainable Energy, LLC. Wind Power Siting: Public Acceptance and Land Use Suzanne Tegen WINDExchange Webinar June 17, 2015 2 Overview * Current NREL Research *...

  18. Cold test data for equipment acceptance into 105-KE Basin

    SciTech Connect (OSTI)

    Packer, M.J.

    1994-11-09T23:59:59.000Z

    This document provides acceptance testing of equipment to be installed in the 105-KE Basin for pumping sludge to support the discharge chute barrier doors installation.

  19. ity practitioners, academics, medical professionals, and patient advocacy

    E-Print Network [OSTI]

    Golbeck, Jennifer

    . Such guidelines for consistency and data sharing, common in other industries, would allow health- care health- care, frustrates health profession- als, and may harm patients. In the U.K., Microsoft's extensive Common User Interface guidelines are being adapted for use by the National Health Service

  20. Strategy Guideline: Compact Air Distribution Systems

    SciTech Connect (OSTI)

    Burdick, A.

    2013-06-01T23:59:59.000Z

    This Strategy Guideline discusses the benefits and challenges of using a compact air distribution system to handle the reduced loads and reduced air volume needed to condition the space within an energy efficient home. Traditional systems sized by 'rule of thumb' (i.e., 1 ton of cooling per 400 ft2 of floor space) that 'wash' the exterior walls with conditioned air from floor registers cannot provide appropriate air mixing and moisture removal in low-load homes. A compact air distribution system locates the HVAC equipment centrally with shorter ducts run to interior walls, and ceiling supply outlets throw the air toward the exterior walls along the ceiling plane; alternatively, high sidewall supply outlets throw the air toward the exterior walls. Potential drawbacks include resistance from installing contractors or code officials who are unfamiliar with compact air distribution systems, as well as a lack of availability of low-cost high sidewall or ceiling supply outlets to meet the low air volumes with good throw characteristics. The decision criteria for a compact air distribution system must be determined early in the whole-house design process, considering both supply and return air design. However, careful installation of a compact air distribution system can result in lower material costs from smaller equipment, shorter duct runs, and fewer outlets; increased installation efficiencies, including ease of fitting the system into conditioned space; lower loads on a better balanced HVAC system, and overall improved energy efficiency of the home.

  1. Continuing engineering education for software engineering professionals

    SciTech Connect (OSTI)

    Davis, P.I.

    1992-02-19T23:59:59.000Z

    Designers of software for safety-critical applications are impelled to supplement their education through continuing engineering studies in the areas of requirements analysis, hazard identification, risk analysis, fault tolerance, failure modes, and psychology. Today's complex level of design is contributing to opportunities for catastrophic design errors in computer functions where failure of such functions is capable of causing injury and death. A syllabus of post-graduate, core studies within the curricula of five engineering specialties is suggested. Software Engineers are exhorted to undertake a professional, responsible role in safety-critical software design.

  2. Continuing engineering education for software engineering professionals

    SciTech Connect (OSTI)

    Davis, P.I.

    1992-02-19T23:59:59.000Z

    Designers of software for safety-critical applications are impelled to supplement their education through continuing engineering studies in the areas of requirements analysis, hazard identification, risk analysis, fault tolerance, failure modes, and psychology. Today`s complex level of design is contributing to opportunities for catastrophic design errors in computer functions where failure of such functions is capable of causing injury and death. A syllabus of post-graduate, core studies within the curricula of five engineering specialties is suggested. Software Engineers are exhorted to undertake a professional, responsible role in safety-critical software design.

  3. Professional Skills Program Schedule | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOn April 23, 2014, an OHASeptember 2010 | Department of Energy This guideProfessional

  4. M&V Guidelines: Measurement and Verification for Federal Energy...

    Broader source: Energy.gov (indexed) [DOE]

    M&V Guidelines: Measurement and Verification for Federal Energy Projects Version 4.0 Prepared for the U.S. Department of Energy Federal Energy Management Program By

  5. University of Missouri Electronic Thesis and Dissertation Guidelines

    E-Print Network [OSTI]

    Taylor, Jerry

    1 University of Missouri Electronic Thesis and Dissertation Guidelines Contents 1. Thesis & Dissertation Basics Addendum to the Survey of Earned Doctorates Thesis/Dissertation Processing Fee Statement Form Original

  6. Computing & Networking Resource and Responsible Use Policies & Guidelines

    E-Print Network [OSTI]

    Understanding AC&N System & Network Administrator Policies I. PURPOSE This policy has been establishedComputing & Networking Resource and Responsible Use Policies & Guidelines Related policies Alleged Copyright Infringement Campus Wireless Network Infrastructure Policy Personal Home Page Policy

  7. DRAFT Measurement & Verification Guidelines Version 4.0

    Broader source: Energy.gov [DOE]

    Document describes the Federal Energy Management Program's (FEMP) standard procedures and guidelines for measurement and verification (M&V) for federal energy managers, procurement officials, and energy service providers.

  8. TPA Code of Honor Guidelines Multiple Subject Credential Program

    E-Print Network [OSTI]

    de Lijser, Peter

    8/10 TPA Code of Honor Guidelines Multiple Subject Credential Program California State University, Fullerton The California TPA involves a series of take-home tasks that measure a teacher candidate's ability

  9. age guidelines update: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    General Guideline (updated on Jan'09 by EM) All users of our server constantly. Use "quota" command to check your disk usage. Access to Server: Use ssh to access bioservx:...

  10. Guidelines for carbon dioxide capture, transport and storage

    SciTech Connect (OSTI)

    Hanson, S.

    2008-07-01T23:59:59.000Z

    The goal of this effort was to develop a set of preliminary guidelines and recommendations for the deployment of carbon capture and storage (CCS) technologies in the United States. The CCS Guidelines are written for those who may be involved in decisions on a proposed project: the developers, regulators, financiers, insurers, project operators, and policymakers. Contents are: Part 1: introduction; Part 2: capture; Part 3: transport; Part 4; storage; Part. 5 supplementary information. Within these parts, eight recommended guidelines are given for: CO{sub 2} capture; ancillary environmental impacts from CO{sub 2}; pipeline design and operation; pipeline safety and integrity; siting CO{sub 2} pipelines; pipeline access and tariff regulation; guidelines for (MMV); risk assessment; financial responsibility; property rights and ownership; site selection and characterisation; injection operations; site closure; and post-closure. 18 figs., 9 tabs., 4 apps.

  11. Release of DRAFT RFP Headquarters Reading Room Instructions/Guidelines

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Release of DRAFT RFP Headquarters Reading Room InstructionsGuidelines 1. Reading Room Points of Contact: 721 - 88, Mike Baehre, (202) 586-6575 89 - Close of Draft RFP, John...

  12. Advanced human-system interface design review guidelines

    SciTech Connect (OSTI)

    O'Hara, J.M.

    1990-01-01T23:59:59.000Z

    Advanced, computer-based, human-system interface designs are emerging in nuclear power plant (NPP) control rooms. These developments may have significant implications for plant safety in that they will greatly affect the ways in which operators interact with systems. At present, however, the only guidance available to the US Nuclear Regulatory Commission (NRC) for the review of control room-operator interfaces, NUREG-0700, was written prior to these technological changes and is thus not designed to address them. The objective of the project reported in this paper is to develop an Advanced Control Room Design Review Guideline for use in performing human factors reviews of advanced operator interfaces. This guideline will be implemented, in part, as a portable, computer-based, interactive document for field use. The paper describes the overall guideline development methodology, the present status of the document, and the plans for further guideline testing and development. 21 refs., 3 figs.

  13. ZERO WASTE STANFORD WASTE REDUCTION, RECYCLING AND COMPOSTING GUIDELINES

    E-Print Network [OSTI]

    Gerdes, J. Christian

    ZERO WASTE STANFORD WASTE REDUCTION, RECYCLING AND COMPOSTING GUIDELINES PLASTICS, METALS & GLASS pleaseemptyandflatten COMPOSTABLES kitchenandyardwasteonly LANDFILL ONLY ifallelsefails All Plastic Containers Metal Material All Food Paper Plates & Napkins *including pizza & donut boxes Compostable & Biodegradable

  14. Highlights of the Fall 2013 Implementation Guidelines for

    E-Print Network [OSTI]

    Su, Xiao

    Highlights of the Fall 2013 Implementation Guidelines for Presidential Directive 2009-05 Maureen not permit financial aid for classes not required for the degree.) #12;THANKYOU!!! Fall 2013 Implementation

  15. Guidelines for Assessing the Feasibility of Small Cogeneration Systems

    E-Print Network [OSTI]

    Whiting, M., Jr.

    1984-01-01T23:59:59.000Z

    , hospitals, colleges, and shopping centers. This paper will present guidelines for assessing the feasibility of cogeneration for small to medium sized energy users, and it will describe the commercially available technologies that can be utilized....

  16. Guidelines for Nominations 2012-13 Chancellor's Awards for Excellence

    E-Print Network [OSTI]

    Reed, Christopher A.

    Guidelines for Nominations 2012-13 Chancellor's Awards for Excellence in Undergraduate Research and Creative Achievement Nominations for Students Nominations for awards should include a description activities showcased (including the significance of the student's contribution). * Awards for scholarly

  17. Measure Guideline: Summary of Interior Ducts in New Construction, Including an Efficient, Affordable Method to Install Fur-Down Interior Ducts

    SciTech Connect (OSTI)

    Beal, D.; McIlvaine , J.; Fonorow, K.; Martin, E.

    2011-11-01T23:59:59.000Z

    This document illustrates guidelines for the efficient installation of interior duct systems in new housing, including the fur-up chase method, the fur-down chase method, and interior ducts positioned in sealed attics or sealed crawl spaces. This document illustrates guidelines for the efficient installation of interior duct systems in new housing. Interior ducts result from bringing the duct work inside a home's thermal and air barrier. Architects, designers, builders, and new home buyers should thoroughly investigate any opportunity for energy savings that is as easy to implement during construction, such as the opportunity to construct interior duct work. In addition to enhanced energy efficiency, interior ductwork results in other important advantages, such as improved indoor air quality, increased system durability and increased homeowner comfort. While the advantages of well-designed and constructed interior duct systems are recognized, the implementation of this approach has not gained a significant market acceptance. This guideline describes a variety of methods to create interior ducts including the fur-up chase method, the fur-down chase method, and interior ducts positioned in sealed attics or sealed crawl spaces. As communication of the intent of an interior duct system, and collaboration on its construction are paramount to success, this guideline details the critical design, planning, construction, inspection, and verification steps that must be taken. Involved in this process are individuals from the design team; sales/marketing team; and mechanical, insulation, plumbing, electrical, framing, drywall and solar contractors.

  18. UCT Budget Guidelines 2015 June 2014 Version 1/2015 Page 1 of 7

    E-Print Network [OSTI]

    Jarrett, Thomas H.

    UCT Budget Guidelines 2015 June 2014 Version 1/2015 Page 1 of 7 Planning guidelines and Budget and Budgeting Working Group (P&BWG). The Planning guidelines provide the framework and context for Budgets, whereas the Budget guidelines provide practical and procedural detail on the submissions required

  19. Sandia software guidelines. Volume 3. Standards, practices, and conventions

    SciTech Connect (OSTI)

    Not Available

    1986-07-01T23:59:59.000Z

    This volume is one in a series of Sandia Software Guidelines intended for use in producing quality software within Sandia National Laboratories. In consonance with the IEEE Standard for Software Quality Assurance Plans, this volume identifies software standards, conventions, and practices. These guidelines are the result of a collective effort within Sandia National Laboratories to define recommended deliverables and to document standards, practices, and conventions which will help ensure quality software. 66 refs., 5 figs., 6 tabs.

  20. Measure Guideline: Air Conditioner Diagnostics, Maintenance, and Replacement

    SciTech Connect (OSTI)

    Springer, D.; Dakin, B.

    2013-03-01T23:59:59.000Z

    This guideline responds to the need for an efficient means of identifying, diagnosing, and repairing faults in air conditioning systems in existing homes that are undergoing energy upgrades. Inadequate airflow due to constricted ducts or undersized filters, improper refrigerant charge, and other system defects can be corrected at a fraction of the cost of equipment replacement and can yield significant savings. The guideline presents a two-step approach to diagnostics and repair.

  1. LOGO GUIDELINES VERSION 1.0 -JULY 2009

    E-Print Network [OSTI]

    Twente, Universiteit

    LOGO GUIDELINES VERSION 1.0 - JULY 2009 #12;UNIVERSITY OF TWENTE LOGO GUIDELINES VERSION 1.0 - JULY 2009 2 Basic elements 3 1.1 Logo 4 1.2 Dutch and English 5 1.3 Alternative logo version 6 1.4 Bounding box 8 1.5 Minimal logo size 8 1.6 Contrast with background 9 CONTENTS #12;UNIVERSITY OF TWENTE LOGO

  2. GIS Professionals The Forestry Corp., based in Edmonton, Alberta, has been providing exceptional quality professional

    E-Print Network [OSTI]

    GIS Professionals The Forestry Corp., based in Edmonton, Alberta, has been providing exceptional: Be self-motivated Be a good problem solver Have some experience or exposure to the business of forestry. Please forward resumes and cover letters to: The Forestry Corp. Attention: Information Services Manager

  3. Accepted Manuscript Title: Metal Current Collector-Free Freestanding

    E-Print Network [OSTI]

    Cui, Yi

    Accepted Manuscript Title: Metal Current Collector-Free Freestanding Silicon-Carbon 1D, Metal Current Collector-Free Freestanding Silicon-Carbon 1D Nanocomposites for Ultralight Anodes that apply to the journal pertain. #12;Page 1 of 20 Accepted M anuscript 1 Metal Current Collector

  4. acceptance test limit: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    acceptance test limit First Page Previous Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Next Page Last Page Topic Index 1 G4Beamline Acceptance Tests Chris...

  5. acceptance test plan: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    acceptance test plan First Page Previous Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Next Page Last Page Topic Index 1 G4Beamline Acceptance Tests Chris...

  6. Structural acceptance criteria Remote Handling Building Tritium Extraction Facility

    SciTech Connect (OSTI)

    Mertz, G.

    1999-12-16T23:59:59.000Z

    This structural acceptance criteria contains the requirements for the structural analysis and design of the Remote Handling Building (RHB) in the Tritium Extraction Facility (TEF). The purpose of this acceptance criteria is to identify the specific criteria and methods that will ensure a structurally robust building that will safely perform its intended function and comply with the applicable Department of Energy (DOE) structural requirements.

  7. Accepted Manuscript Title: Dramatic Performance Gains in Vanadium Redox Flow

    E-Print Network [OSTI]

    Mench, Matthew M.

    ) are a potentially enabling technology for intermittent, renewable energy sources such as wind and solar power [1, for most stationary power uses, the #12;Page 3 of 18 Accepted M anuscript energy density per seAccepted Manuscript Title: Dramatic Performance Gains in Vanadium Redox Flow Batteries Through

  8. Guidelines for ground motion definition for the eastern United States

    SciTech Connect (OSTI)

    Gwaltney, R.C.; Aramayo, G.A.; Williams, R.T.

    1985-06-01T23:59:59.000Z

    Guidelines for the determination of earthquake ground motion definition for the eastern United States are established here. Both far-field and near-field guidelines are given. The guidelines were based on an extensive review of the current procedures for specifying ground motion in the United States. Both empirical and theoretical procedures were used in establishing the guidelines because of the low seismicity in the eastern United States. Only a few large- to great-sized earthquakes (M/sub s/ > 7.5) have occurred in this region, no evidence of tectonic surface ruptures related to historic or Holocene earthquakes has been found, and no currently active plate boundaries of any kind are known in this region. Very little instrumented data have been gathered in the East. Theoretical procedures are proposed so that in regions of almost no data, a reasonable level of seismic ground motion activity can be assumed. The guidelines are to be used to develop the safe shutdown earthquake (SSE). A new procedure for establishing the operating basis earthquake (OBE) is proposed, in particular for the eastern United States. The OBE would be developed using a probabilistic assessment of the geological conditions and the recurrence of seismic events at a site. These guidelines should be useful in development of seismic design requirements for future reactors. 17 refs., figs., tabs.

  9. Reverse Auction Bidding- A Study of Industry Professionals

    E-Print Network [OSTI]

    Piper, Robert

    2013-12-06T23:59:59.000Z

    REVERSE AUCTION BIDDING - A STUDY OF INDUSTRY PROFESSIONALS A Thesis by ROBERT BRADLEY PIPER Submitted to the Office of Graduate and Professional Studies of Texas A&M University in partial fulfillment of the requirements... Bradley Piper ii ABSTRACT This research project into Reverse Auction Bidding is the first of the twenty studies completed to this time to use professional contractors. Previous case studies used students at Texas A&M University as the subjects...

  10. Building design guidelines for solar energy technologies

    SciTech Connect (OSTI)

    Givoni, B.

    1989-01-01T23:59:59.000Z

    There are two main objectives to this publication. The first is to find out the communalities in the experience gained in previous studies and in actual applications of solar technologies in buildings, residential as well as nonresidential. The second objective is to review innovative concepts and products which may have an impact on future developments and applications of solar technologies in buildings. The available information and common lessons were collated and presented in a form which, hopefully, is useful for architects and solar engineers, as well as for teachers of solar architecture'' and students in Architectural Schools. The publication is based mainly on the collection and analysis of relevant information. The information included previous studies in which the performance of solar buildings was evaluated, as well as the personal experience of the Author and the research consultants. The state of the art, as indicated by these studies and personal experience, was summarized and has served as basis for the development of the Design Guidelines. In addition to the summary of the state of the art, as was already applied in solar buildings, an account was given of innovative concepts and products. Such innovations have occurred in the areas of thermal storage by Phase Change Materials (PCM) and in glazing with specialized or changeable properties. Interesting concepts were also developed for light transfer, which may enable to transfer sunlight to the core areas of large multi story nonresidential buildings. These innovations may have a significant impact on future developments of solar technologies and their applications in buildings. 15 refs., 19 figs., 3 tabs.

  11. Portland State University Personal/Professional Service Contract (PSC)

    E-Print Network [OSTI]

    Caughman, John

    Portland State University Personal/Professional Service Contract (PSC) INSTRUCTIONS IF ANY REQUIRED A University's Personal Services Contract Terms and Conditions: This must be given to Contractor before

  12. GovEnergy 2011 Offers Federal Energy Professionals Strategies...

    Office of Environmental Management (EM)

    and military energy professionals participated in GovEnergy last month - an annual trade show held in Cincinnati, Ohio cosponsored by the Energy Department along with several...

  13. Asset Score Webinar Slides: Real Estate and Design Professionals...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Score Webinar Slides: Real Estate and Design Professionals The Asset Score is a free, web-based software tool developed by DOE and the Pacific Northwest National Laboratory...

  14. INTERNSHIP COMMITMENT FORM Master of Professional Science (MPS)

    E-Print Network [OSTI]

    Miami, University of

    INTERNSHIP COMMITMENT FORM Master of Professional Science (MPS) Student Name: _______________________________________________________ E-Mail: ________________________________ Phone: _______________________ Internship Organization: ________________________________________ Internship Supervisor: ______________________________________________ E-Mail: ______________________ Phone

  15. INTERNSHIP AGREEMENT FORM Master's of Professional Science (MPS)

    E-Print Network [OSTI]

    Miami, University of

    INTERNSHIP AGREEMENT FORM Master's of Professional Science (MPS) Student Name-Mail: ________________________________ Phone: _______________________ Internship Organization: __________________________________ Address: ________________________________________ Internship Supervisor: ______________________________________________ E-Mail: ______________________ Phone

  16. K-12 teacher participation in online professional development

    E-Print Network [OSTI]

    McNamara, Catherine Louise

    2010-01-01T23:59:59.000Z

    professional development included: All types of learning,learning types, ways for differentiated instruction, it wenttype and asynchronous written dialogue in adult learning.

  17. DOE Office of Indian Energy Professional Course: Tribal Renewable...

    Broader source: Energy.gov (indexed) [DOE]

    Professional Courses: Tribal Renewable Energy Project Development and Financing Essentials (text version) Below is the text version of the Webinar titled "DOE Office of Indian...

  18. NNSA Security Professional of the Year Awards Presented to Two...

    National Nuclear Security Administration (NNSA)

    Security Professional of the Year Awards Presented to Two Oak Ridge Officials | National Nuclear Security Administration Facebook Twitter Youtube Flickr RSS People Mission Managing...

  19. assurance technology professionals: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    science lessons. The effectiveness of this innovative program was evaluated (more) Biggs, Ellyn M. 2008-01-01 16 Professional Development for a New Curriculum for a Developing...

  20. NOTE: This list was prepared as a courtesy to assist students in finding local dentists who are: accepting new patients, accept Delta Dental, have hygiene services and are available for emergency care.

    E-Print Network [OSTI]

    California at Santa Cruz, University of

    : accepting new patients, accept Delta Dental, have hygiene services and are available for emergency care

  1. ASME PTC 46 -- Acceptance test code for overall plant performance

    SciTech Connect (OSTI)

    Friedman, J.R. [Siemens-Westinghouse Power Corp., Orlando, FL (United States); Yost, J.G. [Sargent and Lundy, Chicago, IL (United States)

    1999-11-01T23:59:59.000Z

    ASME published PTC 46 in 1996 after five years of development. PTC 46 is the first industry standard providing explicit procedures for conducting acceptance tests to determine the overall thermal performance and output of power generating units. It is applicable to any heat cycle power generating unit. This survey paper provides an overview of PTC 46 and discusses how PTC 46 can be used for acceptance testing of new combined cycle and fossil steam power generating units. Several technical papers have been previously presented that provide more detailed information and discussion on the use of PTC 46 in acceptance testing.

  2. HEALTH CARE COLLEGES CODE OF STUDENT PROFESSIONAL CONDUCT

    E-Print Network [OSTI]

    Hayes, Jane E.

    10/14/08 Page 1 HEALTH CARE COLLEGES CODE OF STUDENT PROFESSIONAL CONDUCT (APPROVED BY THE BOARD OF TRUSTEES) ARTICLE 1: INTRODUCTION A. Rationale The credibility of a health care professional is based. Consequently, students in the health care colleges have a particular obligation to conduct themselves at all

  3. Professional Certificate in Environmental Management UCD School of Public Health,

    E-Print Network [OSTI]

    is to provide a broad perspective on environmental assessment and management to professionals that are required · Environmental Assessment and Management Further Module Information: Further information on individual modules underlying environmental assessment and management and professionally interact with a range of environmental

  4. Radioisotope Thermoelectric Generator F7 Flight Unit Acceptance Buy Off

    SciTech Connect (OSTI)

    none,

    1997-02-20T23:59:59.000Z

    These are viewgraphs from the subject presentation. The LMMS E-7 history is outlined; Qualification and use of the F-7 GPHS-RTG for the Cassini mission; and the F-7 acceptance test program and performance are described.

  5. Social Acceptance of Wind: A Brief Overview (Presentation), NREL...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Social Acceptance of Wind: A Brief Overview AWEA State Wind Energy Forum Eric Lantz January 20, 2015 Lansing, Michigan NRELPR-6A20-63590 2 Presentation Overview 1. Concepts -...

  6. accepting foregin research: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Next Page Last Page Topic Index 1 Swinburne University of Technology Research Funding Acceptance Form Physics Websites Summary: )...

  7. Must a Bayesian Accept the Likelihood Principle? Daniel Steel

    E-Print Network [OSTI]

    Fitelson, Branden

    Must a Bayesian Accept the Likelihood Principle? Daniel Steel Department of Philosophy 503 S. Kedzie Hall Michigan State University East Lansing, MI 48824-1032 Email: steel@msu.edu #12;1 1

  8. Idaho CERCLA Disposal Facility Complex Waste Acceptance Criteria

    SciTech Connect (OSTI)

    W. Mahlon Heileson

    2006-10-01T23:59:59.000Z

    The Idaho Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) Disposal Facility (ICDF) has been designed to accept CERCLA waste generated within the Idaho National Laboratory. Hazardous, mixed, low-level, and Toxic Substance Control Act waste will be accepted for disposal at the ICDF. The purpose of this document is to provide criteria for the quantities of radioactive and/or hazardous constituents allowable in waste streams designated for disposal at ICDF. This ICDF Complex Waste Acceptance Criteria is divided into four section: (1) ICDF Complex; (2) Landfill; (3) Evaporation Pond: and (4) Staging, Storage, Sizing, and Treatment Facility (SSSTF). The ICDF Complex section contains the compliance details, which are the same for all areas of the ICDF. Corresponding sections contain details specific to the landfill, evaporation pond, and the SSSTF. This document specifies chemical and radiological constituent acceptance criteria for waste that will be disposed of at ICDF. Compliance with the requirements of this document ensures protection of human health and the environment, including the Snake River Plain Aquifer. Waste placed in the ICDF landfill and evaporation pond must not cause groundwater in the Snake River Plain Aquifer to exceed maximum contaminant levels, a hazard index of 1, or 10-4 cumulative risk levels. The defined waste acceptance criteria concentrations are compared to the design inventory concentrations. The purpose of this comparison is to show that there is an acceptable uncertainty margin based on the actual constituent concentrations anticipated for disposal at the ICDF. Implementation of this Waste Acceptance Criteria document will ensure compliance with the Final Report of Decision for the Idaho Nuclear Technology and Engineering Center, Operable Unit 3-13. For waste to be received, it must meet the waste acceptance criteria for the specific disposal/treatment unit (on-Site or off-Site) for which it is destined.

  9. Evaluation of Chemical Warfare Agent Percutaneous Vapor Toxicity: Derivation of Toxicity Guidelines for Assessing Chemical Protective Ensembles.

    SciTech Connect (OSTI)

    Watson, A.P.

    2003-07-24T23:59:59.000Z

    Percutaneous vapor toxicity guidelines are provided for assessment and selection of chemical protective ensembles (CPEs) to be used by civilian and military first responders operating in a chemical warfare agent vapor environment. The agents evaluated include the G-series and VX nerve agents, the vesicant sulfur mustard (agent HD) and, to a lesser extent, the vesicant Lewisite (agent L). The focus of this evaluation is percutaneous vapor permeation of CPEs and the resulting skin absorption, as inhalation and ocular exposures are assumed to be largely eliminated through use of SCBA and full-face protective masks. Selection of appropriately protective CPE designs and materials incorporates a variety of test parameters to ensure operability, practicality, and adequacy. One aspect of adequacy assessment should be based on systems tests, which focus on effective protection of the most vulnerable body regions (e.g., the groin area), as identified in this analysis. The toxicity range of agent-specific cumulative exposures (Cts) derived in this analysis can be used as decision guidelines for CPE acceptance, in conjunction with weighting consideration towards more susceptible body regions. This toxicity range is bounded by the percutaneous vapor estimated minimal effect (EME{sub pv}) Ct (as the lower end) and the 1% population threshold effect (ECt{sub 01}) estimate. Assumptions of exposure duration used in CPE certification should consider that each agent-specific percutaneous vapor cumulative exposure Ct for a given endpoint is a constant for exposure durations between 30 min and 2 hours.

  10. Nuclear energy acceptance and potential role to meet future energy demand. Which technical/scientific achievements are needed?

    SciTech Connect (OSTI)

    Schenkel, Roland [European Commission, Joint Research Centre, Institute for Transuranium Elements, Hermann-von-Helmholtz-Platz 1,76344 Eggenstein-Leopoldshafen (Germany)

    2012-06-19T23:59:59.000Z

    25 years after Chernobyl, the Fukushima disaster has changed the perspectives of nuclear power. The disaster has shed a negative light on the independence, reliability and rigor of the national nuclear regulator and plant operator and the usefulness of the international IAEA guidelines on nuclear safety. It has become clear that, in the light of the most severe earthquake in the history of Japan, the plants at Fukushima Daiichi were not adequately protected against tsunamis. Nuclear acceptance has suffered enormously and has changed the perspectives of nuclear energy dramatically in countries that have a very risk-sensitive population, Germany is an example. The paper analyses the reactions in major countries and the expected impact on future deployment of reactors and on R and D activities. On the positive side, the disaster has demonstrated a remarkable robustness of most of the 14 reactors closest to the epicentre of the Tohoku Seaquake although not designed to an event of level 9.0. Public acceptance can only be regained with a rigorous and worldwide approach towards inherent reactor safety and design objectives that limit the impact of severe accidents to the plant itself (like many of the new Gen III reactors). A widespread release of radioactivity and the evacuation (temporary or permanent) of the population up to 30 km around a facility are simply not acceptable. Several countries have announced to request more stringent international standards for reactor safety. The IAEA should take this move forward and intensify and strengthen the different peer review mission schemes. The safety guidelines and peer reviews should in fact become legally binding for IAEA members. The paper gives examples of the new safety features developed over the last 20 years and which yield much safer reactors with lesser burden to the environment under severe accident conditions. The compatibility of these safety systems with the current concepts for fusion-fission hybrids, which have recently been proposed for energy production, is critically reviewed. There are major challenges remaining that are shortly outlined. Scientific/technical achievements that are required in the light of the Fukushima accident are highlighted.

  11. Embodied Energy Calculation: Method and Guidelines for a Building and its Constituent Materials

    E-Print Network [OSTI]

    Dixit, Manish Kumar

    2013-10-23T23:59:59.000Z

    an embodied energy definition, a complete system boundary model, and a set of data collection, embodied energy calculation, and result reporting guidelines. The main goal of proposing the guidelines was to streamline the process of embodied energy calculation...

  12. Washington and Lee University Guidelines for Responding to Information Security Breaches

    E-Print Network [OSTI]

    Marsh, David

    Washington and Lee University Guidelines for Responding to Information Security Breaches Notifications 1. As further detailed in the university's Guidelines for Reporting Information Security Breaches regarding an actual or suspected data breach should contact: i. the university's Information Security

  13. Development of a Soil Conservation Standard and Guidelines for OHV Recreation Management

    E-Print Network [OSTI]

    Ahmad, Sajjad

    Development of a Soil Conservation Standard and Guidelines for OHV Recreation Management, Sacramento, CA 95814 Key Terms: OHV Management, Soil Conservation Guidelines, Erosion Control, Applied Recreation Management also allowed for sustainability of trail systems and recreation opportunities. A key

  14. Inelastic analysis acceptance criteria for radioactive material transportation containers

    SciTech Connect (OSTI)

    Ammerman, D.J.; Ludwigsen, J.S.

    1993-06-01T23:59:59.000Z

    The design criteria currently used in the design of radioactive material (RAM) transportation containers are taken from the ASME Boiler and Pressure Vessel Code (ASME, 1992). These load-based criteria are ideally suited for pressure vessels where the loading is quasistatic and all stresses are in equilibrium with externally applied loads. For impact events, the use of load-based criteria is less supportable. Impact events tend to be energy controlled, and thus, energy-based acceptance criteria would appear to be more appropriate. Determination of an ideal design criteria depends on what behavior is desired. Currently there is not a design criteria for inelastic analysis for RAM nation packages that is accepted by the regulatory agencies. This lack of acceptance criteria is one of the major factors in limiting the use of inelastic analysis. In this paper inelastic analysis acceptance criteria based on stress and strain-energy density will be compared for two stainless steel test units subjected to impacts onto an unyielding target. Two different material models are considered for the inelastic analysis, a bilinear fit of the stress-strain curve and a power law hardening model that very closely follows the stress-strain curve. It is the purpose of this paper to stimulate discussion and research into the area of strain-energy density based inelastic analysis acceptance criteria.

  15. Strain-Based Acceptance Criteria for Energy-Limited Events

    SciTech Connect (OSTI)

    Spencer D. Snow; Dana K. Morton

    2009-07-01T23:59:59.000Z

    The American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel (B&PV) Code was primarily written with stress-based acceptance criteria. These criteria are applicable to force, displacement, and energy-controlled loadings and ensure a factor of safety against failure. However, stress-based acceptance criteria are often quite conservative for one time energy-limited events such as accidental drops and impacts. For several years, the ASME Working Group on Design of Division 3 Containments has been developing the Design Articles for Section III, Division 3, “Containments for Transportation and Storage of Spent Nuclear Fuel and High-Level Radioactive Material and Waste,” and has wanted to establish strain-based acceptance criteria for accidental drops of containments. This Division 3 working group asked the Working Group on Design Methodology (WGDM) to assist in developing these strain-based acceptance criteria. This paper discusses the current proposed strain-based acceptance criteria, associated limitations of use, its background development, and the current status.

  16. Acceptance sampling using judgmental and randomly selected samples

    SciTech Connect (OSTI)

    Sego, Landon H.; Shulman, Stanley A.; Anderson, Kevin K.; Wilson, John E.; Pulsipher, Brent A.; Sieber, W. Karl

    2010-09-01T23:59:59.000Z

    We present a Bayesian model for acceptance sampling where the population consists of two groups, each with different levels of risk of containing unacceptable items. Expert opinion, or judgment, may be required to distinguish between the high and low-risk groups. Hence, high-risk items are likely to be identifed (and sampled) using expert judgment, while the remaining low-risk items are sampled randomly. We focus on the situation where all observed samples must be acceptable. Consequently, the objective of the statistical inference is to quantify the probability that a large percentage of the unsampled items in the population are also acceptable. We demonstrate that traditional (frequentist) acceptance sampling and simpler Bayesian formulations of the problem are essentially special cases of the proposed model. We explore the properties of the model in detail, and discuss the conditions necessary to ensure that required samples sizes are non-decreasing function of the population size. The method is applicable to a variety of acceptance sampling problems, and, in particular, to environmental sampling where the objective is to demonstrate the safety of reoccupying a remediated facility that has been contaminated with a lethal agent.

  17. Security Trade Control Guidelines for Academic Exchange Agreements

    E-Print Network [OSTI]

    Takada, Shoji

    Security Trade Control Guidelines for Academic Exchange Agreements at Kyoto University Committee for Security Trade Control December 28, 2012 Recent years have seen an increasing number of academic exchange globalization. Under the Foreign Exchange and Foreign Trade Act (FEFTA), which was put into effect in April 2010

  18. SAFETY PROCEDURE & GUIDELINES SUBJECT: Health and Safety Training

    E-Print Network [OSTI]

    Sinnamon, Gordon J.

    SAFETY PROCEDURE & GUIDELINES SUBJECT: Health and Safety Training APPLIES TO: All Departments that the health and safety training program is effective and is in compliance with the applicable federal for conducting training Establish who is responsible for determining the level and type of training required

  19. Guidelines for Evaluation of Nuclear Facility Training Programs

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1995-11-22T23:59:59.000Z

    The Guidelines for Evaluation of Nuclear Facility Training Programs establish objectives and criteria for evaluating nuclear facility training programs. The guidance in this standard provides a framework for the systematic evaluation of training programs at nuclear facilities and is based, in part, on established criteria for Technical Safety Appraisals, Tiger Team Assessments, commercial nuclear industry evaluations, and the DOE Training Accreditation Program.

  20. africa policy guidelines: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    africa policy guidelines First Page Previous Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Next Page Last Page Topic Index 1 Academic Policies and...

  1. PAPER FORMATTING GUIDELINES FOR POLITICAL SCIENCE COURSES. VANDERBILT UNIVERSITY

    E-Print Network [OSTI]

    Bordenstein, Seth

    PAPER FORMATTING GUIDELINES FOR POLITICAL SCIENCE COURSES. VANDERBILT UNIVERSITY (For 2012; longer quotations or extracts should be indented from the left margin and require no quotation marks to the following format: (Please note that the entries are indented after the first line. Word will do

  2. PAPER FORMATTING GUIDELINES FOR POLITICAL SCIENCE COURSES. VANDERBILT UNIVERSITY

    E-Print Network [OSTI]

    Bordenstein, Seth

    PAPER FORMATTING GUIDELINES FOR POLITICAL SCIENCE COURSES. VANDERBILT UNIVERSITY (For 2012 or extracts should be indented from the left margin and require no quotation marks. Changes and additions that the entries are indented after the first line. Word will do this automatically if you click on "Format

  3. Guidelines for Term Papers American Psychological Association 6

    E-Print Network [OSTI]

    Kasman, Alex

    Guidelines for Term Papers American Psychological Association ­ 6 th edition, 2010 Information from-spaced, alphabetized, using the hanging indention function. INDENTATION: Paragraphs: Indent five spaces the first line of each paragraph. (The tab key should be set to this amount and can be used to indent at the beginning

  4. Sandia software guidelines: Volume 5, Tools, techniques, and methodologies

    SciTech Connect (OSTI)

    Not Available

    1989-07-01T23:59:59.000Z

    This volume is one in a series of Sandia Software Guidelines intended for use in producing quality software within Sandia National Laboratories. This volume describes software tools and methodologies available to Sandia personnel for the development of software, and outlines techniques that have proven useful within the Laboratories and elsewhere. References and evaluations by Sandia personnel are included. 6 figs.

  5. DALHOUSIE UNIVERSITY Fire Protection Design Guidelines Nov 2013

    E-Print Network [OSTI]

    Brownstone, Rob

    DALHOUSIE UNIVERSITY Fire Protection Design Guidelines Nov 2013 Department of Facilities Management for fire water backflow preventers are Cold, Ames, Conbraco and Watts. 2. Sprinkler System Addition (Table F): Pipe material for over 2" inside sprinkler water to be Sch10, thin wall. New Section: Standpipes

  6. UC SANTA CRUZ DISSERTATION AND THESIS PREPARATION GUIDELINES

    E-Print Network [OSTI]

    California at Santa Cruz, University of

    Rev 2012 1 UC SANTA CRUZ DISSERTATION AND THESIS PREPARATION GUIDELINES The submission of the Doctoral dissertation or Master's thesis is the final step in the program leading to the award of your and preparation. It will be made available for public use in McHenry Library, and published by UMI Dissertation

  7. GUIDELINES FOR DISSERTATION COMMITTEE SERVICE The Graduate Faculty

    E-Print Network [OSTI]

    Papalambros, Panos

    6.13 GUIDELINES FOR DISSERTATION COMMITTEE SERVICE The Graduate Faculty For dissertation committee institution. Composition of the Dissertation Committee Dissertation committees must have at least four members to be a dissertation that makes a substantive contribution to the candidate's discipline. The cognate member's role

  8. Workshop on problem areas associated with developing carcinogen guidelines

    SciTech Connect (OSTI)

    Not Available

    1984-06-01T23:59:59.000Z

    A workshop was conducted to discuss problem areas associated with developing carcinogen guidelines. Session topics included (1) definition of a carcinogen for regulatory purposes; (2) potency; (3) risk assessment; (4) uncertainties; (5) de minimis quantity; and (6) legal and regulatory issues. Separate abstracts have been prepared for individual papers. (ACR)

  9. FRAX Based Guidelines: Is a Universal Model Appropriate?

    E-Print Network [OSTI]

    Shihadeh, Alan

    Calcium Metabolism & Osteoporosis Program WHO Collaborating Center for Metabolic Bone Disorders American, FACE, FACP Oregon Osteoporosis Center, Portland - William D. Leslie, MD, FRCPC MSc University://www.shef.ac.uk/FRAX; version 3.8; March 19, 2014 #12;FRAX Based Osteoporosis Guidelines To date, several countries have

  10. Social Media Guidelines LSUHSC School of Medicine in New Orleans

    E-Print Network [OSTI]

    Social Media Guidelines LSUHSC School of Medicine in New Orleans Employees and Students At LSUHSC School of Medicine ­ New Orleans (SOM), social networking (both on LSUHSC-provided services to the community. The SOM is committed to facilitating a successful social media strategy for its faculty, staff

  11. Guidelines for the Improvement of Combustion Efficiency for Maple Producers

    E-Print Network [OSTI]

    Hayden, Nancy J.

    Guidelines for the Improvement of Combustion Efficiency for Maple Producers Harry Atkinson to better mixing of combustion gasses. A. An over fire air system should be installed to direct high.c. pressure minimum. Oil burner fans from 1980 on will usually be a good source for a used fan. a. ½ h.p. on 2

  12. UCF TECHNOLOGY FEE GUIDELINES Academic Year 2013-2014

    E-Print Network [OSTI]

    Foroosh, Hassan

    UCF TECHNOLOGY FEE GUIDELINES Academic Year 2013-2014 The 2007 Florida Legislature amended Florida Statutes, Section 1009.24, to establish "a technology fee of up to 5 percent of the tuition per credit hour to enhance instructional technology resources for students and faculty." UCF TECHNOLOGY FEE COMMITTEE Revenue

  13. General Safety Guidelines for Bio-Hazardous Waste Disposal

    E-Print Network [OSTI]

    Holland, Jeffrey

    General Safety Guidelines for Bio-Hazardous Waste Disposal · Determine if you have a Bio-Hazardous, cell cultures, Petri dishes, and etc. NOT fitting the category 1 description. · ALL BIO-HAZARDOUS WASTE OF CATEGORY 1 NEEDS TO BE TREATED BY AUTOCLAVE OR WITH HIV/HBV KILLING AGENT BEFORE PICK-UP · Bio-hazardous

  14. Hazardous Waste Management Compliance Guidelines INTRODUCTION AND SCOPE

    E-Print Network [OSTI]

    Reisslein, Martin

    Hazardous Waste Management Compliance Guidelines INTRODUCTION AND SCOPE Arizona State University Management, generate a variety of hazardous chemical wastes. ASU is classified as a hazardous waste generator) and has been assigned an EPA identification number (AZD042017723). As a hazardous waste generator facility

  15. Guidelines for Residential Commissioning Craig Wray, Iain Walker, Max Sherman

    E-Print Network [OSTI]

    LBNL-48767 Guidelines for Residential Commissioning Craig Wray, Iain Walker, Max Sherman Berkeley, CA 94720 January 2003 This report describes work supported by the California Energy Commission-76SF00098. This report was prepared as a result of work sponsored by the California Energy Commission

  16. Energy Saving Guidelines for Portland State University Heating and Ventilation

    E-Print Network [OSTI]

    Caughman, John

    Energy Saving Guidelines for Portland State University Heating and Ventilation Conditioned spaces will be heated to a temperature range of 67-70 in the winter and cooled, where applicable, to a temperature range will not be allowed, unless approval from FPM has been granted for cases where spaces cannot otherwise be heated

  17. Weatherization and Workforce Guidelines for Home Energy Upgrades (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2011-03-01T23:59:59.000Z

    This fact sheet provides essential information about the 2011 publication of the Residential Retrofit Workforce Guidelines, including their origin, their development with the help of industry leaders to create the standard work specifications for retrofit work, their public review, and the JTAs/KSAs (job-task analyses/knowledge, skills, and abilities) that they encompass.

  18. Page 1 of 4 Guidelines for the Mentor

    E-Print Network [OSTI]

    Demirel, Melik C.

    Page 1 of 4 Guidelines for the Mentor Welcome to the Department of Engineering Science and Mechanics Mentor Program! The Department of Engineering Science and Mechanics mentor program facilitates a one-to-one relationship between a current student and a volunteer alumni mentor for guidance

  19. ITS POLICIES AND GUIDELINES CATEGORY: Information Technology, Security, Privacy,

    E-Print Network [OSTI]

    Gering, Jon C.

    ITS POLICIES AND GUIDELINES CATEGORY: Information Technology, Security, Privacy, Information Access & Management STATUS: Approved POLICY TITLE: Information Technology Security Policy POLICY PURPOSE: The purpose of this Information Technology Security Policy is to ensure and describe the steps necessary to secure information

  20. Ontological Mapping of Information Security Best-Practice Guidelines

    E-Print Network [OSTI]

    Ontological Mapping of Information Security Best-Practice Guidelines Stefan Fenz, Thomas Pruckner security knowl- edge. While information security ontologies already exist, no methods have been proposed. Therefore, this paper presents a method for mapping the information security knowledge of the French EBIOS

  1. Design guidelines for granular particles in a conical centrifugal filter

    E-Print Network [OSTI]

    Fleck, Norman A.

    Design guidelines for granular particles in a conical centrifugal filter A.F.M. Bizarda , D centrifugal filter is thereby obtained as a function of the slurry and basket properties. Corresponding basket) 1. Introduction 1.1. Centrifugal filters Centrifugal filters are commonly used in the food

  2. Measure Guideline: Buried and/or Encapsulated Ducts

    SciTech Connect (OSTI)

    Shapiro, C.; Zoeller, W.; Mantha, P.

    2013-08-01T23:59:59.000Z

    Buried and/or encapsulated ducts (BEDs) are a class of advanced, energy-efficiency strategies intended to address the significant ductwork thermal losses associated with ducts installed in unconditioned attics. BEDs are ducts installed in unconditioned attics that are covered in loose-fill insulation and/or encapsulated in closed cell polyurethane spray foam insulation. This Measure Guideline covers the technical aspects of BEDs as well as the advantages, disadvantages, and risks of BEDs compared to other alternative strategies. This guideline also provides detailed guidance on installation of BEDs strategies in new and existing homes through step-by-step installation procedures. This Building America Measure Guideline synthesizes previously published research on BEDs and provides practical information to builders, contractors, homeowners, policy analysts, building professions, and building scientists. Some of the procedures presented here, however, require specialized equipment or expertise. In addition, some alterations to duct systems may require a specialized license. Persons implementing duct system improvements should not go beyond their expertise or qualifications. This guideline provides valuable information for a building industry that has struggled to address ductwork thermal losses in new and existing homes. As building codes strengthen requirements for duct air sealing and insulation, flexibility is needed to address energy efficiency goals. While ductwork in conditioned spaces has been promoted as the panacea for addressing ductwork thermal losses, BEDs installations approach - and sometimes exceed - the performance of ductwork in conditioned spaces.

  3. SCE Classroom Lighting Guidelines 38 September 2004 Design Description

    E-Print Network [OSTI]

    SCE Classroom Lighting Guidelines 38 September 2004 EXAMPLE 1 Design Description In this design, the ambient lighting system uses two, twenty foot of semi-indirect luminaires that are suspended in 2 rows electronic ballasts. The whiteboard task light is a linear wallwasher about 12 feet long that uses (3) Super

  4. Guidelines for Disposing Electronic Items on Campus STATE PROPERTY ONLY

    E-Print Network [OSTI]

    Harms, Kyle E.

    Association of Electronics Recyclers Throwing e-waste away and having it end up in a landfill is also a directGuidelines for Disposing Electronic Items on Campus STATE PROPERTY ONLY As technology advances more and more, electronics become obsolete. Broken or faulty electronic items sometimes end up in dumpsters

  5. Clinical Faculty Guidelines Page 1 Provost's Office Contact: S. Hurley

    E-Print Network [OSTI]

    Ward, Karen

    Clinical Faculty Guidelines Page 1 Provost's Office Contact: S. Hurley January 11, 2012 CLINICAL The clinical faculty pathway has been established to accommodate a growing body of individuals whose activities are in the clinical realm. As UTEP increases its capacity for health practice and research, the University must

  6. Guidelines for the Management and Retention of Public Record

    E-Print Network [OSTI]

    Sheridan, Jennifer

    v1.2 1 11/23/2010 Guidelines for the Management and Retention of Public Record E-Mail Wisconsin Public Records Board #12;v1.2 2 11/23/2010 Contents Introduction .............................................................................................................................3 Determine if you have a public record

  7. Global Assessments and Guidelines for Sustainable Liquid Biofuel

    E-Print Network [OSTI]

    Global Assessments and Guidelines for Sustainable Liquid Biofuel Production in Developing Countries Biofuel Production in Developing Countries FINAL REPORT A GEF Targeted Research Project Organized by Bernd for Sustainable Liquid Biofuels. A GEF Targeted Research Project. Heidelberg/Paris/Utrecht/Darmstadt, 29 February

  8. GUIDELINES FOR CERTIFICATION OF COMBINED HEAT AND POWER SYSTEMS

    E-Print Network [OSTI]

    CALIFORNIA ENERGY COMMISSION GUIDELINES FOR CERTIFICATION OF COMBINED HEAT AND POWER SYSTEMS for Certification of Combined Heat and Power Systems Pursuant to the Waste Heat and Carbon Emissions Reduction Act Heat and Power System Pursuant to the Waste Heat and Carbon Emissions Reduction Act, Public Utilities

  9. M.Sc. Mathematics: Guidelines on Writing the Project Dissertation

    E-Print Network [OSTI]

    Wright, Francis

    M.Sc. Mathematics: Guidelines on Writing the Project Dissertation Aim The aim of the dissertation. Remember that your dissertation will be read by three examiners, all of whom will be asking themselves `Can The dissertation should be written in correct, grammatical English. The content should be clear and readable

  10. OPUC Flexibility Planning Guidelines Pacific Northwest Demand Response Project

    E-Print Network [OSTI]

    ) · Demand management ­ smart grid controllable "withdrawal" and "recharge" #12;Jim Hicks Energy Strategies Jim Hicks Energy Strategies West, LLC #12;OPUC's New IRP Guidelines* · Integrated Resource Plans operational view of planning, including comprehensive multi-faceted VER integration strategy #12;Daily Wind

  11. Meek School of Journalism and New Media Journalism Internship Guidelines

    E-Print Network [OSTI]

    Tchumper, Gregory S.

    Meek School of Journalism and New Media Journalism Internship Guidelines An internship is vital preparation for your career in journalism. To get credit for an internship, it must give you significant be at least of junior-level standing to get credit for your internship. You must be a Journalism major. STEP 1

  12. ROV PACK: INFORMATION AND GUIDELINES www.serpentproject.com

    E-Print Network [OSTI]

    National Oceanography Centre, Southampton

    are lucky enough to see Encourage best practice during offshore activities Map any impact footprint AND OBJECTIVES 5 TECHNIQUES 6 VIDEO SURVEY 6 NON DRILL-RIG OPERATIONS 7 PIPELINE AND IRM 7 DRILLING SUPPORT that is created when drilling offshore #12;ROV PACK: INFORMATION AND GUIDELINES www.serpentproject.com SERPENT

  13. Energy Department Accepting Applications for a $3.6 Million Hydroelect...

    Office of Environmental Management (EM)

    Accepting Applications for a 3.6 Million Hydroelectric Production Incentive Program Energy Department Accepting Applications for a 3.6 Million Hydroelectric Production Incentive...

  14. Indoor air movement acceptability and thermal comfort in hot-humid climates

    E-Print Network [OSTI]

    Candido, Christhina Maria

    2010-01-01T23:59:59.000Z

    Bittencourt, L. S. (2010) Air movement acceptability limitsthermal acceptability and air movement assessments in a hot-e úmidos. (Applicability of air velocity limits for thermal

  15. Guidelines for Participation in the ETV ESTE Verification Test of Lead Paint Test Kits

    E-Print Network [OSTI]

    Guidelines for Participation in the ETV ESTE Verification Test of Lead Paint Test Kits Revised 09/24/2009 The following guidelines have been set to establish the eligibility of individual test kits for participation in the ETV ESTE verification test of lead paint test kits. Test kits must conform to the following guidelines

  16. ISO's Work on Tactile and Haptic Interaction Guidelines Jan B.F. van Erp 1

    E-Print Network [OSTI]

    Carter, Jim

    ISO's Work on Tactile and Haptic Interaction Guidelines Jan B.F. van Erp 1 Jim Carter 2 Ian Andrew on the guidelines document, including an introduction of the framework that will be used to structure the guidance from 40 research papers and from 10 ISO standards. Keywords: haptic, tactile, guidelines, standards. 1

  17. DLC Policy and Guidelines 02/28/2013 University of New Orleans

    E-Print Network [OSTI]

    Kulp, Mark

    types of distance learning courses at UNO are synchronous Compressed Video courses, synchronous WebDLC Policy and Guidelines 02/28/2013 1 University of New Orleans Distance Learning Policy & Guidelines Definition of Distance Learning SACS Guidelines define `distance learning' as "a formal

  18. 1 ISERN-96-05 Practical Guidelines for Measurement-Based Process Improvement1

    E-Print Network [OSTI]

    Briand, Lionel C.

    1 ISERN-96-05 Practical Guidelines for Measurement-Based Process Improvement1 Lionel C. Briand guidelines for efficient and useful software measurement aimed at process improvement in industry. Issues the consistency and completeness of measurement plans. More precisely, our guidelines will be defined

  19. Measure Guideline: Three High Performance Mineral Fiber Insulation Board Retrofit Solutions

    SciTech Connect (OSTI)

    Neuhauser, K.

    2015-01-01T23:59:59.000Z

    This Measure Guideline describes a high performance enclosure retrofit package that uses mineral fiber insulation board. The Measure Guideline describes retrofit assembly and details for wood frame roof and walls and for cast concrete foundations. This Measure Guideline is intended to serve contractors and designers seeking guidance for non-foam exterior insulation retrofit.

  20. Intergroup Differences and Its Impact on Professional Exchanges

    E-Print Network [OSTI]

    Rodriguez, Eddie

    2012-10-19T23:59:59.000Z

    The purpose of this study was to examine how misperceptions of intergroup differences affect the working and professional relationships among Hispanic teachers, European American (White) teachers, and European American (White) administrators...

  1. Communication Standards for the Female Technical Sales Professional

    E-Print Network [OSTI]

    Macke, Brenda

    2005-12-16T23:59:59.000Z

    Communication techniques to be used by female technical sales professionals (FTSP) with clients were explored by researching gender communication, technical communication, and sales communication. It was found that by ...

  2. Product acceptance environmental and destructive testing for reliability.

    SciTech Connect (OSTI)

    Dvorack, Michael A.; Kerschen, Thomas J.; Collins, Elmer W.

    2007-08-01T23:59:59.000Z

    To determine whether a component is meeting its reliability requirement during production, acceptance sampling is employed in which selected units coming off the production line are subjected to additional environmental and/or destructive tests that are within the normal environment space to which the component is expected to be exposed throughout its life in the Stockpile. This report describes what these tests are and how they are scored for reliability purposes. The roles of screens, Engineering Use Only tests, and next assembly product acceptance testing are also discussed, along with both the advantages and disadvantages of environmental and destructive testing.

  3. NEVADA TEST SITE WASTE ACCEPTANCE CRITERIA, JUNE 2006

    SciTech Connect (OSTI)

    U.S. DEPARTMENT OF ENERGY, NATIONAL NUCLEAR SECURITY ADMINISTRATION NEVADA SITE OFFICE

    2006-06-01T23:59:59.000Z

    This document establishes the U.S. Department of Energy (DOE), National Nuclear Security Administration Nevada Site Office (NNSA/NSO) waste acceptance criteria (WAC). The WAC provides the requirements, terms, and conditions under which the Nevada Test Site (NTS) will accept low-level radioactive (LLW) and mixed waste (MW) for disposal. It includes requirements for the generator waste certification program, characterization, traceability, waste form, packaging, and transfer. The criteria apply to radioactive waste received at the NTS Area 3 and Area 5 Radioactive Waste Management Complex (RWMC) for storage or disposal.

  4. Received 25 March 2002 Accepted 6 August 2002

    E-Print Network [OSTI]

    Received 25 March 2002 Accepted 6 August 2002 Published online 9 December 2002 Nuclear markers reveal unexpected genetic variation and a Congolese­Nilotic origin of the Lake Victoria cichlid species flock Ole Seehausen1,2* , Egbert Koetsier2 , Maria Victoria Schneider2 , Lauren J. Chapman3,4 , Colin A

  5. Continuous cleanup of oilfield waste in an environmentally acceptable manner

    SciTech Connect (OSTI)

    Wally, R.F.; Dowdy, S.A.

    1983-05-01T23:59:59.000Z

    After several years of research and field testing, a process has been developed which can economically treat reserve pit waste. This continuous process converts the reserve pit contents into two environmentally acceptable products: a relatively dry, non-leachable cake-like solid material, and water which is purified for recycle or release directly into the environment.

  6. Accepted Manuscript Sustainable manufacturing: Evaluation and Modeling of

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    in additive manufacturing Florent Le Bourhisa · Olivier Kerbrata Jean-Yves Hascoeta · Pascal Mognola Accepted of manufacturing processes where great amounts of energy and materials are being consumed. Nowadays, additive manufacturing technologies such as Direct Additive Laser Manufac- turing allow us to manufacture functional

  7. Accepted for Publication Simulation modeling combined with decision control can

    E-Print Network [OSTI]

    Accepted for Publication ABSTRACT Simulation modeling combined with decision control can offer) with Model Predictive Control (MPC) paradigms using a Knowledge Interchange Broker (KIB). This environment uses the KIB to compose discrete event simulation and model predictive control models. This approach

  8. acceptance test summary: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    acceptance test summary First Page Previous Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Next Page Last Page Topic Index 1 LMS Qualification and Flight...

  9. Received 11 January 2002 Accepted 1 March 2002

    E-Print Network [OSTI]

    Pratt, Stephen

    Received 11 January 2002 Accepted 1 March 2002 Published online 29 May 2002 Deciding on a new home, Bristol BS8 1UG, UK 5 Section of Neurobiology and Behavior, Cornell University, Ithaca, NY 14853, USA nectar sources, ants stub- bornly wasting energy on longer routes--can be adaptive in the long term

  10. Determination of the Acceptable Room Temperature Range for Local Cooling

    E-Print Network [OSTI]

    Zhang, Y.; Zhao, R.

    2006-01-01T23:59:59.000Z

    Determination of the acceptable room temperature range is a key problem in satisfactory design of local cooling for energy savings. At the room temperatures ranging from neutral to warm, three sensitive body parts-the face, chest and back-were each...

  11. Impacts of Mixing on Acceptable Indoor Air Quality in Homes

    E-Print Network [OSTI]

    have central heating, ventilation, and air conditioning systems, which tend to mix the air; thus of Mixing on Acceptable Indoor Air Quality in Homes ABSTRACT Ventilation reduces occupant exposure to indoor different dilution rates and contaminant source strengths. The total ventilation rate is the most important

  12. Evolution as Computation Evolutionary Theory (accepted for publication)

    E-Print Network [OSTI]

    Mayfield, John

    1/21/05 1 Evolution as Computation Evolutionary Theory (accepted for publication) By: John E: jemayf@iastate.edu Key words: Evolution, Computation, Complexity, Depth Running head: Evolution of evolution must include life and also non-living processes that change over time in a manner similar

  13. www.elsevier.com/locate/neucom Author's Accepted Manuscript

    E-Print Network [OSTI]

    Bartlett, Marian Stewart

    embodiment (e.g., perception-action systems, biomechanics, motor control), and sensitivity to cognitivewww.elsevier.com/locate/neucom Author's Accepted Manuscript New trends in cognitive science Bartlett and Tony Jebara, New trends in cognitive science: Integrative approaches to learning

  14. www.elsevier.com/locate/csda Author's Accepted Manuscript

    E-Print Network [OSTI]

    Kundu, Debasis

    Bayesestimatorsforreliabilitymeasuresingeometric distribution model using masked system life test data Ammar M. Sarhan, Debasis Kundu PII: S0167 distribution model using masked system life test data, Computa- tional Statistics & Data Analysis (2007), doi;Accepted m anuscript Bayes estimators for reliability measures in geometric distribution model using masked

  15. Received 9 June 2004 Accepted 25 June 2004

    E-Print Network [OSTI]

    Davies, Jonathan

    dependent on solar energy input. Previous work demonstrated a sig- nificant correlation between the generalReceived 9 June 2004 Accepted 25 June 2004 Published online 24 September 2004 Environmental energy Biology, Imperial College London, Silwood Park Campus, Ascot SL5 7PY, UK 2 Molecular Systematics Section

  16. Accepted Manuscript Variational formulations for surface tension, capillarity and wetting

    E-Print Network [OSTI]

    Frey, Pascal

    Accepted Manuscript Variational formulations for surface tension, capillarity and wetting Gustavo C formulations for surface tension, capillarity and wetting, Comput. Methods Appl. Mech. Engrg. (2011), doi: 10 formulations for surface tension, capillarity and wetting Gustavo C. Buscagliaa,b, , Roberto F. Ausasa,b a

  17. The University of Texas at Austin School of Nursing Professional and Technical Standards for Nursing Practice

    E-Print Network [OSTI]

    Johnston, Daniel

    practice are determined by the Board of Nursing, national accreditation guidelines evaluation tools and course guidelines, students must be able to provide safe must be able to measure, calculate, reason and quickly analyze information

  18. Updated 05/12/2014 Graduate Program Review Guidelines

    E-Print Network [OSTI]

    Zhang, Yuanlin

    CERT Soil Management CERT *Plant & Soil Science (Crop Science) and Soil Science were phased out's future resource needs, recruitment, strengths and weaknesses, and its contribution to the strategic plan Professional March/MS 4020100 Land Use Planning, Management & Design PhD 3020600 Historic Preservation CERT

  19. Strategy Guideline: Quality Management in Existing Homes; Cantilever Floor Example

    SciTech Connect (OSTI)

    Taggart, J.; Sikora, J.; Wiehagen, J.; Wood, A.

    2011-12-01T23:59:59.000Z

    This guideline is designed to highlight the QA process that can be applied to any residential building retrofit activity. The cantilevered floor retrofit detailed in this guideline is included only to provide an actual retrofit example to better illustrate the QA activities being presented. The goal of existing home high performing remodeling quality management systems (HPR-QMS) is to establish practices and processes that can be used throughout any remodeling project. The research presented in this document provides a comparison of a selected retrofit activity as typically done versus that same retrofit activity approached from an integrated high performance remodeling and quality management perspective. It highlights some key quality management tools and approaches that can be adopted incrementally by a high performance remodeler for this or any high performance retrofit. This example is intended as a template and establishes a methodology that can be used to develop a portfolio of high performance remodeling strategies.

  20. Guidelines for Developing Soil and Water Management Programs: Irrigated Pecans

    E-Print Network [OSTI]

    Miyamoto, S.

    Guidelines for Developing Soil and Water Management Programs: Irrigated Pecans Agricultural Research and Extension Center at El Paso March 2002 Texas Agricultural Experiment Station The Texas A&M University System Texas Water Resources Institute... by soil and water testing and appraisal, and evaluation of soil improvement options. Finally, orchard management practices, such as soil and irrigation management, fertilization and weed control should be fine- tuned. The significance of each measure may...